WorldWideScience

Sample records for technology verification trainer

  1. Environmental technology verification methods

    CSIR Research Space (South Africa)

    Szewczuk, S

    2016-03-01

    Full Text Available Environmental Technology Verification (ETV) is a tool that has been developed in the United States of America, Europe and many other countries around the world to help innovative environmental technologies reach the market. Claims about...

  2. Biometric Technologies and Verification Systems

    CERN Document Server

    Vacca, John R

    2007-01-01

    Biometric Technologies and Verification Systems is organized into nine parts composed of 30 chapters, including an extensive glossary of biometric terms and acronyms. It discusses the current state-of-the-art in biometric verification/authentication, identification and system design principles. It also provides a step-by-step discussion of how biometrics works; how biometric data in human beings can be collected and analyzed in a number of ways; how biometrics are currently being used as a method of personal identification in which people are recognized by their own unique corporal or behavior

  3. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: FUEL CELLS

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

  4. INNOVATIVE TECHNOLOGY VERIFICATION REPORT XRF ...

    Science.gov (United States)

    The Niton XLt 700 Series (XLt) XRF Services x-ray fluorescence (XRF) analyzer was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The field portion of the demonstration was conducted in January 2005 at the Kennedy Athletic, Recreational and Social Park (KARS) at Kennedy Space Center on Merritt Island, Florida. The demonstration was designed to collect reliable performance and cost data for the XLt analyzer and seven other commercially available XRF instruments for measuring trace elements in soil and sediment. The performance and cost data were evaluated to document the relative performance of each XRF instrument. This innovative technology verification report describes the objectives and the results of that evaluation and serves to verify the performance and cost of the XLt analyzer. Separate reports have been prepared for the other XRF instruments that were evaluated as part of the demonstration. The objectives of the evaluation included determining each XRF instrument’s accuracy, precision, sample throughput, and tendency for matrix effects. To fulfill these objectives, the field demonstration incorporated the analysis of 326 prepared samples of soil and sediment that contained 13 target elements. The prepared samples included blends of environmental samples from nine different sample collection sites as well as spiked samples with certified element concentrations. Accuracy

  5. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: GREEN BUILDING TECHNOLOGIES

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

  6. Verification of wet blasting decontamination technology

    International Nuclear Information System (INIS)

    Matsubara, Sachito; Murayama, Kazunari; Yoshida, Hirohisa; Igei, Shigemitsu; Izumida, Tatsuo

    2013-01-01

    Macoho Co., Ltd. participated in the projects of 'Decontamination Verification Test FY 2011 by the Ministry of the Environment' and 'Decontamination Verification Test FY 2011 by the Cabinet Office.' And we tested verification to use a wet blasting technology for decontamination of rubble and roads contaminated by the accident of Fukushima Daiichi Nuclear Power Plant of the Tokyo Electric Power Company. As a results of the verification test, the wet blasting decontamination technology showed that a decontamination rate became 60-80% for concrete paving, interlocking, dense-grated asphalt pavement when applied to the decontamination of the road. When it was applied to rubble decontamination, a decontamination rate was 50-60% for gravel and approximately 90% for concrete and wood. It was thought that Cs-134 and Cs-137 attached to the fine sludge scraped off from a decontamination object and the sludge was found to be separated from abrasives by wet cyclene classification: the activity concentration of the abrasives is 1/30 or less than the sludge. The result shows that the abrasives can be reused without problems when the wet blasting decontamination technology is used. (author)

  7. Advanced Technologies for Design Information Verification

    Energy Technology Data Exchange (ETDEWEB)

    Watkins, Michael L.; Sheen, David M.; Rose, Joseph L.; Cumblidge, Stephen E.

    2009-07-08

    This paper discusses several technologies that have the potential to enhance facilities design verification. These approaches have shown promise in addressing the challenges associated with the verification of sub-component geometry and material composition for structures that are not directly accessible for physical inspection. A simple example is a pipe that extends into or through a wall or foundation. Both advanced electromagnetic and acoustic modalities will be discussed. These include advanced radar imaging, transient thermographic imaging, and guided acoustic wave imaging. Examples of current applications are provided. The basic principles and mechanisms of these inspection techniques are presented along with the salient practical features, advantages, and disadvantages of each technique. Other important considerations, such as component geometries, materials, and degree of access are also treated. The importance of, and strategies for, developing valid inspection models are also discussed. Beyond these basic technology adaptation and evaluation issues, important user interface considerations are outlined, along with approaches to quantify the overall performance reliability of the various inspection methods.

  8. Subsurface barrier verification technologies, informal report

    International Nuclear Information System (INIS)

    Heiser, J.H.

    1994-06-01

    One of the more promising remediation options available to the DOE waste management community is subsurface barriers. Some of the uses of subsurface barriers include surrounding and/or containing buried waste, as secondary confinement of underground storage tanks, to direct or contain subsurface contaminant plumes and to restrict remediation methods, such as vacuum extraction, to a limited area. To be most effective the barriers should be continuous and depending on use, have few or no breaches. A breach may be formed through numerous pathways including: discontinuous grout application, from joints between panels and from cracking due to grout curing or wet-dry cycling. The ability to verify barrier integrity is valuable to the DOE, EPA, and commercial sector and will be required to gain full public acceptance of subsurface barriers as either primary or secondary confinement at waste sites. It is recognized that no suitable method exists for the verification of an emplaced barrier's integrity. The large size and deep placement of subsurface barriers makes detection of leaks challenging. This becomes magnified if the permissible leakage from the site is low. Detection of small cracks (fractions of an inch) at depths of 100 feet or more has not been possible using existing surface geophysical techniques. Compounding the problem of locating flaws in a barrier is the fact that no placement technology can guarantee the completeness or integrity of the emplaced barrier. This report summarizes several commonly used or promising technologies that have been or may be applied to in-situ barrier continuity verification

  9. Advanced Technologies for Design Information Verification

    International Nuclear Information System (INIS)

    Watkins, Michael L.; Sheen, David M.; Rose, Joseph L.; Cumblidge, Stephen E.

    2009-01-01

    This paper discusses several technologies that have the potential to enhance facilities design verification. These approaches have shown promise in addressing the challenges associated with the verification of sub-component geometry and material composition for structures that are not directly accessible for physical inspection. A simple example is a pipe that extends into or through a wall or foundation. Both advanced electromagnetic and acoustic modalities will be discussed. These include advanced radar imaging, transient thermographic imaging, and guided acoustic wave imaging. Examples of current applications are provided. The basic principles and mechanisms of these inspection techniques are presented along with the salient practical features, advantages, and disadvantages of each technique. Other important considerations, such as component geometries, materials, and degree of access are also treated. The importance of, and strategies for, developing valid inspection models are also discussed. Beyond these basic technology adaptation and evaluation issues, important user interface considerations are outlined, along with approaches to quantify the overall performance reliability of the various inspection methods.

  10. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: EXEL INDUSTRIAL AIRMIX SPRAY GUN

    Science.gov (United States)

    The Environmental Technology Verification Program has partnered with Concurrent Technologies Corp. to verify innovative coatings and coating equipment technologies for reducing air emissions. This report describes the performance of EXEL Industrial's Kremlin Airmix high transfer ...

  11. Consortium for Verification Technology Fellowship Report.

    Energy Technology Data Exchange (ETDEWEB)

    Sadler, Lorraine E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-06-01

    As one recipient of the Consortium for Verification Technology (CVT) Fellowship, I spent eight days as a visiting scientist at the University of Michigan, Department of Nuclear Engineering and Radiological Sciences (NERS). During this time, I participated in multiple department and research group meetings and presentations, met with individual faculty and students, toured multiple laboratories, and taught one-half of a one-unit class on Risk Analysis in Nuclear Arms control (six 1.5 hour lectures). The following report describes some of the interactions that I had during my time as well as a brief discussion of the impact of this fellowship on members of the consortium and on me/my laboratory’s technical knowledge and network.

  12. Environmental Technology Verification Report: Taconic Energy, Inc. TEA Fuel Additive

    Science.gov (United States)

    The Greenhouse Gas Technology Center (GHG Center) is one of six verification organizations operating under EPA’s ETV program. One sector of significant interest to GHG Center stakeholders is transportation - particularly technologies that result in fuel economy improvements. Taco...

  13. Technology for bolus verification in proton therapy

    Science.gov (United States)

    Shipulin, K. N.; Mytsin, G. V.; Agapov, A. V.

    2015-01-01

    To ensure the conformal depth-dose distribution of a proton beam within a target volume, complex shaped range shifters (so-called boluses), which account for the heterogeneous structure of patient tissue and organs in the beam path, were calculated and manufactured. The precise manufacturing of proton compensators used for patient treatment is a vital step in quality assurance in proton therapy. In this work a software-hardware complex that verifies the quality and precision of bolus manufacturing at the Medico-Technical Complex (MTC) was developed. The boluses consisted of a positioning system with two photoelectric biosensors. We evaluated 20 boluses used in proton therapy of five patients. A total number of 2562 experimental points were measured, of which only two points had values that differed from the calculated value by more than 0.5 mm. The other data points displayed a deviation within ±0.5 mm from the calculated value. The technology for bolus verification developed in this work can be used for the high precision testing of geometrical parameters of proton compensators in radiotherapy.

  14. ENVIRONMENTAL TECHNOLOGY VERIFICATION: TEST/QA PLAN FOR THE VERIFICATION TESTING OF SELECTIVE CATALYTIC REDUCTION CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

    Science.gov (United States)

    The U.S. Environmental Protection Agency established the Environmental Technology Verification Program to accelerate the development and commercialization of improved environmental technology through third party verification and reporting of product performance. Research Triangl...

  15. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT LASER TOUCH AND TECHNOLOGIES, LLC LASER TOUCH MODEL LT-B512

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of Laser Touch model LT-B512 targeting device manufactured by Laser Touch and Technologies, LLC, for manual spray painting operations. The relative transfer efficiency (TE) improved an avera...

  16. Environmental Technology Verification Report - Electric Power and Heat Production Using Renewable Biogas at Patterson Farms

    Science.gov (United States)

    The U.S. EPA operates the Environmental Technology Verification program to facilitate the deployment of innovative technologies through performance verification and information dissemination. A technology area of interest is distributed electrical power generation, particularly w...

  17. Technical workshop on safeguards, verification technologies, and other related experience

    International Nuclear Information System (INIS)

    1998-01-01

    The aim of the Technical Workshop on safeguards was to encourage a clearer understanding of the IAEA Safeguards System, its origins and evolution and the present state of the art. Presentations held by the IAEA officials and outside experts examined as well other components of the non-proliferation regime, the current practices and procedures, and the future prospects. A series of presentations described the characteristics of the interaction between global and regional verification systems and described relevant past and present experience. Prominence given to such state of the art verification technologies as environmental sampling, satellite imaging and monitoring thorough remote and unattended techniques demonstrated, beyond any doubt, the essentially dynamic nature of verification. It is generally acknowledged that there have been major achievements in preventing spread of nuclear weapons, but no verification system can in itself prevent proliferation

  18. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, GEOPROBE INC., PNEUMATIC BLADDER PUMP GW 1400 SERIES

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) design efficient processes for conducting has created the Environmental Technology perfofl1lance tests of innovative technologies. Verification Program (E TV) to facilitate the deployment of innovative or improved environmental techn...

  19. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - TETRATEC PTFE TECHNOLOGIES TETRATEX 8005

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  20. DIESEL ENGINE RETROFIT TECHNOLOGY VERIFICATION (POSTER)

    Science.gov (United States)

    ETV is presenting a poster at the EPA's 2005 Science Forum from May 16-18, 2005 in Washington, DC. This poster will contain a summary of the performance results realized by the six verified diesel retrofit technologies, as well as potential impacts that could be realized if sigi...

  1. Training of Trainers.

    Science.gov (United States)

    Gormley, Wilma J.; Austin, John H.

    1985-01-01

    Discusses specific training methods and common characteristics of participants in workshops sponsored by Agency for International Development Water and Sanitation for Health Project for extension agents, who will act as trainers in transfer of sanitation technology in developing nations. Recommendations for conducting such workshops in…

  2. Advanced Communication Technology Satellite (ACTS) multibeam antenna technology verification experiments

    Science.gov (United States)

    Acosta, Roberto J.; Larko, Jeffrey M.; Lagin, Alan R.

    1992-01-01

    The Advanced Communication Technology Satellite (ACTS) is a key to reaching NASA's goal of developing high-risk, advanced communications technology using multiple frequency bands to support the nation's future communication needs. Using the multiple, dynamic hopping spot beams, and advanced on board switching and processing systems, ACTS will open a new era in communications satellite technology. One of the key technologies to be validated as part of the ACTS program is the multibeam antenna with rapidly reconfigurable hopping and fixed spot beam to serve users equipped with small-aperature terminals within the coverage areas. The proposed antenna technology experiments are designed to evaluate in-orbit ACTS multibeam antenna performance (radiation pattern, gain, cross pol levels, etc.).

  3. ENVIRONMENTAL TECHNOLOGY VERIFICATION--FUELCELL ENERGY, INC.: DFC 300A MOLTEN CARBONATE FUEL CELL COMBINED HEAT AND POWER SYSTEM

    Science.gov (United States)

    The U.S. EPA operates the Environmental Technology Verification program to facilitate the deployment of innovative technologies through performance verification and information dissemination. A technology area of interest is distributed electrical power generation, particularly w...

  4. Battery Technology Life Verification Test Manual Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Jon P. Christophersen

    2012-12-01

    The purpose of this Technology Life Verification Test (TLVT) Manual is to help guide developers in their effort to successfully commercialize advanced energy storage devices such as battery and ultracapacitor technologies. The experimental design and data analysis discussed herein are focused on automotive applications based on the United States Advanced Battery Consortium (USABC) electric vehicle, hybrid electric vehicle, and plug-in hybrid electric vehicle (EV, HEV, and PHEV, respectively) performance targets. However, the methodology can be equally applied to other applications as well. This manual supersedes the February 2005 version of the TLVT Manual (Reference 1). It includes criteria for statistically-based life test matrix designs as well as requirements for test data analysis and reporting. Calendar life modeling and estimation techniques, including a user’s guide to the corresponding software tool is now provided in the Battery Life Estimator (BLE) Manual (Reference 2).

  5. Construction and validation of a low-cost surgical trainer based on iPhone technology for training laparoscopic skills.

    Science.gov (United States)

    Pérez Escamirosa, Fernando; Ordorica Flores, Ricardo; Minor Martínez, Arturo

    2015-04-01

    In this article, we describe the construction and validation of a laparoscopic trainer using an iPhone 5 and a plastic document holder case. The abdominal cavity was simulated with a clear plastic document holder case. On 1 side of the case, 2 holes for entry of laparoscopic instruments were drilled. We added a window to place the camera of the iPhone, which works as our camera of the trainer. Twenty residents carried out 4 tasks using the iPhone Trainer and a physical laparoscopic trainer. The time of all tasks were analyzed with a simple paired t test. The construction of the trainer took 1 hour, with a cost of iPhone Trainer is a reusable and fully functional device that allows surgeons to practice their skills anywhere and at their own pace.

  6. Test/QA Plan for Verification of Leak Detection and Repair Technologies

    Science.gov (United States)

    The purpose of the leak detection and repair (LDAR) test and quality assurance plan is to specify procedures for a verification test applicable to commercial LDAR technologies. The purpose of the verification test is to evaluate the performance of participating technologies in b...

  7. Task Force Report: Assessment of Nuclear Monitoring and Verification Technologies

    Science.gov (United States)

    2014-01-01

    UNCLASSIFIED  Recommendation:  State/Bureau  of  Arms  Control,  Verification  and  Compliance  ( AVC )  (diplomatic), DOE/National Nuclear Security...Department.     Recommendation:  State/ AVC ,  DOE/NNSA,  and  DoD/Acquisition,  Technology,  and  Logistics  (AT&L)  should  review  current U.S.  facility...agencies, State/ AVC , ASD(NCB), NNSA and NCPC should create  the processes and oversee the following steps:       Establish  a  “White  Team”  whose

  8. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, SHARPE MANUFACTURING TITANIUM T1-CG SPRAY GUN

    Science.gov (United States)

    Under EPA’s Environmental Technology Verification program, which provides objective and scientific third party analysis of new technology that can benefit the environment, the pollution prevention capabilities of a high transfer efficiency liquid spray gun was tested. This ...

  9. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, ANEST IWATA CORPORATION W400-LV SPRAY GUN

    Science.gov (United States)

    Under EPA’s Environmental Technology Verification program, which provides objective and scientific third party analysis of new technology that can benefit the environment, the pollution prevention capabilities of a high transfer efficiency liquid spray gun was tested. This ...

  10. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BIOQUELL, INC. CLARIS C HYDROGEN PEROXIDE GAS GENERATOR

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Clarus C Hydrogen Peroxide Gas Generator, a biological decontamination device manufactured by BIOQUELL, Inc. The unit was tested by evaluating its ability to decontaminate seven types...

  11. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - MENARDI-CRISWELL 50-504 FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  12. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - STANDARD FILTER CORPORATION PE16ZU FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  13. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - INSPEC FIBRES 5512BRF FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  14. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - AIR PURATOR CORPORATION HUYGLAS 1405M FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  15. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - BHA GROUP, INC. QG061 FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  16. ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM: PROTOCOL FOR THE VERIFICATION OF GROUTING MATERIALS FOR INFRASTRUCTURE REHABILITATION AT THE UNIVERSITY OF HOUSTON - CIGMAT

    Science.gov (United States)

    This protocol was developed under the Environmental Protection Agency's Environmental Technology Verification (ETV) Program, and is intended to be used as a guide in preparing laboratory test plans for the purpose of verifying the performance of grouting materials used for infra...

  17. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - ALBANY INTERNATIONAL CORP. INDUSTRIAL PROCESS TECHNOLOGIES PRIMATEX PLUS I FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  18. TET-1- A German Microsatellite for Technology On -Orbit Verification

    Science.gov (United States)

    Föckersperger, S.; Lattner, K.; Kaiser, C.; Eckert, S.; Bärwald, W.; Ritzmann, S.; Mühlbauer, P.; Turk, M.; Willemsen, P.

    2008-08-01

    Due to the high safety standards in the space industry every new product must go through a verification process before qualifying for operation in a space system. Within the verification process the payload undergoes a series of tests which prove that it is in accordance with mission requirements in terms of function, reliability and safety. Important verification components are the qualification for use on the ground as well as the On-Orbit Verification (OOV), i.e. proof that the product is suitable for use under virtual space conditions (on-orbit). Here it is demonstrated that the product functions under conditions which cannot or can only be partially simulated on the ground. The OOV-Program of the DLR serves to bridge the gap between the product tested and qualified on the ground and the utilization of the product in space. Due to regular and short-term availability of flight opportunities industry and research facilities can verify their latest products under space conditions and demonstrate their reliability and marketability. The Technologie-Erprobungs-Tr&äger TET (Technology Experiments Carrier) comprises the core elements of the OOV Program. A programmatic requirement of the OOV Program is that a satellite bus already verified in orbit be used in the first segment of the program. An analysis of suitable satellite buses showed that a realization of the TET satellite bus based on the BIRD satellite bus fulfilled the programmatic requirements best. Kayser-Threde was selected by DLR as Prime Contractor to perform the project together with its major subcontractors Astro- und Feinwerktechnik, Berlin for the platform development and DLR-GSOC for the ground segment development. TET is now designed to be a modular and flexible micro-satellite for any orbit between 450 and 850 km altitude and inclination between 53° and SSO. With an overall mass of 120 kg TET is able to accommodate experiments of up to 50 kg. A multipurpose payload supply systemThere is

  19. Development of evaluation and performance verification technology for radiotherapy radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. Y.; Jang, S. Y.; Kim, B. H. and others

    2005-02-15

    No matter how much the importance is emphasized, the exact assessment of the absorbed doses administered to the patients to treat the various diseases such as lately soaring malignant tumors with the radiotherapy practices is the most important factor. In reality, several over-exposed patients from the radiotherapy practice become very serious social issues. Especially, the development of a technology to exactly assess the high doses and high energies (In general, dose administered to the patients with the radiotherapy practices are very huge doses, and they are about three times higher than the lethal doses) generated by the radiation generators and irradiation equipment is a competing issue to be promptly conducted. Over fifty medical centers in Korea operate the radiation generators and irradiation equipment for the radiotherapy practices. However, neither the legal and regulatory systems to implement a quality assurance program are sufficiently stipulated nor qualified personnel who could run a program to maintain the quality assurance and control of those generators and equipment for the radiotherapy practices in the medical facilities are sufficiently employed. To overcome the above deficiencies, a quality assurance program such as those developed in the technically advanced countries should be developed to exactly assess the doses administered to patients with the radiotherapy practices and develop the necessary procedures to maintain the continuing performance of the machine or equipment for the radiotherapy. The QA program and procedures should induce the fluent calibration of the machine or equipment with quality, and definitely establish the safety of patients in the radiotherapy practices. In this study, a methodology for the verification and evaluation of the radiotherapy doses is developed, and several accurate measurements, evaluations of the doses delivered to patients and verification of the performance of the therapy machine and equipment are

  20. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: MOBILE SOURCE RETROFIT AIR POLLUTION CONTROL DEVICES: CLEAN CLEAR FUEL TECHNOLOGIES, INC.’S, UNIVERSAL FUEL CELL

    Science.gov (United States)

    The U.S. EPA's Office of Research and Development operates the Environmental Technology Verification (ETV) program to facilitate the deployment of innovative technologies through performance verification and information dissemination. Congress funds ETV in response to the belief ...

  1. Transparencies used in describing the CTBT verification regime and its four monitoring technologies

    International Nuclear Information System (INIS)

    Basham, P.

    1999-01-01

    This presentation includes description of the CTBT verification regime and its four monitoring technologies, (namely, seismic monitoring, hydro acoustic monitoring, infrasound monitoring and radionuclides monitoring) CTBT global verification system, sequence of steps needed for installing an international monitoring system station which includes: site survey, site preparation and construction, equipment procurement and installation, final tests and certification

  2. Technology verification phase. Dynamic isotope power system. Final report

    International Nuclear Information System (INIS)

    Halsey, D.G.

    1982-01-01

    The Phase I requirements of the Kilowatt Isotope Power System (KIPS) program were to make a detailed Flight System Conceptual Design (FSCD) for an isotope fueled organic Rankine cycle power system and to build and test a Ground Demonstration System (GDS) which simulated as closely as possible the operational characteristics of the FSCD. The activities and results of Phase II, the Technology Verification Phase, of the program are reported. The objectives of this phase were to increase system efficiency to 18.1% by component development, to demonstrate system reliability by a 5000 h endurance test and to update the flight system design. During Phase II, system performance was improved from 15.1% to 16.6%, an endurance test of 2000 h was performed while the flight design analysis was limited to a study of the General Purpose Heat Source, a study of the regenerator manufacturing technique and analysis of the hardness of the system to a laser threat. It was concluded from these tests that the GDS is basically prototypic of a flight design; all components necessary for satisfactory operation were demonstrated successfully at the system level; over 11,000 total h of operation without any component failure attested to the inherent reliability of this type of system; and some further development is required, specifically in the area of performance

  3. Technology verification phase. Dynamic isotope power system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Halsey, D.G.

    1982-03-10

    The Phase I requirements of the Kilowatt Isotope Power System (KIPS) program were to make a detailed Flight System Conceptual Design (FSCD) for an isotope fueled organic Rankine cycle power system and to build and test a Ground Demonstration System (GDS) which simulated as closely as possible the operational characteristics of the FSCD. The activities and results of Phase II, the Technology Verification Phase, of the program are reported. The objectives of this phase were to increase system efficiency to 18.1% by component development, to demonstrate system reliability by a 5000 h endurance test and to update the flight system design. During Phase II, system performance was improved from 15.1% to 16.6%, an endurance test of 2000 h was performed while the flight design analysis was limited to a study of the General Purpose Heat Source, a study of the regenerator manufacturing technique and analysis of the hardness of the system to a laser threat. It was concluded from these tests that the GDS is basically prototypic of a flight design; all components necessary for satisfactory operation were demonstrated successfully at the system level; over 11,000 total h of operation without any component failure attested to the inherent reliability of this type of system; and some further development is required, specifically in the area of performance. (LCL)

  4. Integrating Requirements Engineering, Modeling, and Verification Technologies into Software and Systems Engineering

    National Research Council Canada - National Science Library

    Broy, Manfred; Leucker, Martin

    2007-01-01

    The objective of this project is the development of an integrated suite of technologies focusing on end-to-end software development supporting requirements analysis, design, implementation, and verification...

  5. ENVIRONMENTAL TECHNOLOGY PROTOCOL VERIFICATION REPORT, EMISSIONS OF VOCS AND ALDEHYDES FROM COMMERCIAL FURNITURE (WITH APPENDICES)

    Science.gov (United States)

    As part of a U.S. Environmental Protection Agency Environmental Technology Verification program, the Research Triangle Institute (RTI) developed a test protocol for measuring volatile organic compounds and aldehydes in a large chamber. RTI convened stakeholders for the commercial...

  6. ENVIRONMENTAL TECHNOLOGY VERIFICATION: ALLIED PHOTOCHEMICAL KROHNZONE 7014 UV-CURABLE COATING

    Science.gov (United States)

    This Environmental Technology Verification report reports on reasearch done on a UV-curable automotive paint. The paint was tested for thickness, appearance, gloss, salt spray resistance, humidity resistance, adhesion, impact, mandrel bend, MEK rub, and abrasion resistance.

  7. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: NEW CONDENSATOR, INC.--THE CONDENSATOR DIESEL ENGINE RETROFIT CRANKCASE VENTILATION SYSTEM

    Science.gov (United States)

    EPA's Environmental Technology Verification Program has tested New Condensator Inc.'s Condensator Diesel Engine Retrofit Crankcase Ventilation System. Brake specific fuel consumption (BSFC), the ratio of engine fuel consumption to the engine power output, was evaluated for engine...

  8. REVIEW OF SOFT SKILLS AMONG TRAINERS FROM ADVANCED TECHNOLOGY TRAINING CENTER (ADTEC)

    OpenAIRE

    Mohd Hasril Amiruddin; Norhayati Ngadiman; Romy Abdul Kadir; Sukartini Saidy

    2016-01-01

    The Advanced Technology Training Centre (ADTEC) institutions under the Ministry of Human Resource are major players for skilled human resource development in Malaysia. In preparing for the competent workforce, ADTECs are taking active measures to ensure that their trainees are equipped with the necessary soft skills –in addition to technical skill - that are much needed to deal with the complex and challenging workplace. However, integrating soft skills into the training that has traditionall...

  9. Water and Sanitation Technologies: A Trainer's Manual. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-32.

    Science.gov (United States)

    Hanson, Bradley D.

    This guide, which includes an outline of 222 hours of technical training integrated with training in community organization techniques, is intended for trainers who prepare Peace Corps water and sanitation technicians and engineers for field service. The training program developed by the guide covers these subject areas: community development,…

  10. Dynamic Isotope Power System: technology verification phase, program plan, 1 October 1978

    International Nuclear Information System (INIS)

    1979-01-01

    The technology verification phase program plan of the Dynamic Isotope Power System (DIPS) project is presented. DIPS is a project to develop a 0.5 to 2.0 kW power system for spacecraft using an isotope heat source and a closed-cycle Rankine power-system with an organic working fluid. The technology verification phase's purposes are to increase the system efficiency to over 18%, to demonstrate system reliability, and to provide an estimate for flight test scheduling. Progress toward these goals is reported

  11. TEST DESIGN FOR ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) OF ADD-ON NOX CONTROL UTILIZING OZONE INJECTION

    Science.gov (United States)

    The paper discusses the test design for environmental technology verification (ETV) of add-0n nitrogen oxides (NOx) control utilizing ozone injection. (NOTE: ETV is an EPA-established program to enhance domestic and international market acceptance of new or improved commercially...

  12. ENVIORNMENTAL TECHNOLOGY VERIFICATION REPORT: ANEST IWATA CORPORATION LPH400-LV HVLP SPRAY GUN

    Science.gov (United States)

    This Enviornmental Technology Verification reports on the characteristics of a paint spray gun. The research showed that the spray gun provided absolute and relative increases in transfer efficiency over the base line and provided a reduction in the use of paint.

  13. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, TETRATEC PTFE PRODUCTS, TETRATEX 6212 FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

  14. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, BHA GROUP, INC., QP131 FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

  15. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, POLYMER GROUP, INC., DURAPEX PET FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

  16. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - W.L. GORE & ASSOCIATES, INC. L4347 FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  17. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - BASF CORPORATION AX/BA-14/9-SAXP FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  18. Environmental Technology Verification: Supplement to Test/QA Plan for Biological and Aerosol Testing of General Ventilation Air Cleaners; Bioaerosol Inactivation Efficiency by HVAC In-Duct Ultraviolet Light Air Cleaners

    Science.gov (United States)

    The Air Pollution Control Technology Verification Center has selected general ventilation air cleaners as a technology area. The Generic Verification Protocol for Biological and Aerosol Testing of General Ventilation Air Cleaners is on the Environmental Technology Verification we...

  19. ENVIRONMENTAL TECHNOLOGY VERIFICATION--TEST REPORT OF MOBILE SOURCE EMISSION CONTROL DEVICES, FLINT HILLS RESOURCES, LP, CCD15010 DIESEL FUEL FORMULATION WITH HITEC4121 ADDITIVE

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification (ETV) Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. ETV seeks to ach...

  20. GENERIC VERIFICATION PROTOCOL FOR DETERMINATION OF EMISSIONS REDUCTIONS FROM SELECTIVE CATALYTIC REDUCTIONS CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

    Science.gov (United States)

    The protocol describes the Environmental Technology Verification (ETV) Program's considerations and requirements for verification of emissions reduction provided by selective catalytic reduction (SCR) technologies. The basis of the ETV will be comparison of the emissions and perf...

  1. Update on Monitoring Technologies for International Safeguards and Fissile Material Verification

    International Nuclear Information System (INIS)

    Croessmann, C. Dennis; Glidewell, Don D.; Mangan, Dennis L.; Smathers, Douglas C.

    1999-01-01

    Monitoring technologies are playing an increasingly important part in international safeguards and fissile material verification. The developments reduce the time an inspector must spend at a site while assuring continuity of knowledge. Monitoring technologies' continued development has produced new seal systems and integrated video surveillance advances under consideration for Trilateral Initiative use. This paper will present recent developments for monitoring systems at Embalse, Argentina, VNHEF, Sarov, Russian, and Savannah River Site, Aiken, South Carolina

  2. Operational Concept of the NEXTSat-1 for Science Mission and Space Core Technology Verification

    Directory of Open Access Journals (Sweden)

    Goo-Hwan Shin

    2014-03-01

    Full Text Available The next generation small satellite-1 (NEXTSat-1 program has been kicked off in 2012, and it will be launched in 2016 for the science missions and the verification of space core technologies. The payloads for these science missions are the Instrument for the Study of Space Storms (ISSS and NIR Imaging Spectrometer for Star formation history (NISS. The ISSS and the NISS have been developed by Korea Advanced Institute of Science and Technology (KAIST and Korea Astronomy and Space science Institute (KASI respectively. The ISSS detects plasma densities and particle fluxes of 10 MeV energy range near the Earth and the NISS uses spectrometer. In order to verify the spacecraft core technologies in the space, the total of 7 space core technologies (SCT will be applied to the NEXTSat-1 for space verification and those are under development. Thus, the operation modes for the ISSS and the NISS for space science missions and 7 SCTs for technology missions are analyzed for the required operation time during the NEXTSat-1’s mission life time of 2 years. In this paper, the operational concept of the NEXTSat-1’s science missions as well as the verification of space core technologies are presented considering constraints of volume, mass, and power after launch.

  3. Independent Verification Survey Report For Zone 1 Of The East Tennessee Technology Park In Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    King, David A.

    2012-01-01

    Oak Ridge Associated Universities (ORAU) conducted in-process inspections and independent verification (IV) surveys in support of DOE's remedial efforts in Zone 1 of East Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee. Inspections concluded that the remediation contractor's soil removal and survey objectives were satisfied and the dynamic verification strategy (DVS) was implemented as designed. Independent verification (IV) activities included gamma walkover surveys and soil sample collection/analysis over multiple exposure units (EUs)

  4. ENVIRONMENTAL TECHNOLOGY VERIFICATION COATINGS AND COATING EQUIPMENT PROGRAM (ETV CCEP), FINAL TECHNOLOGY APPLICATIONS GROUP TAGNITE--TESTING AND QUALITY ASSURANCE PLAN (T/QAP)

    Science.gov (United States)

    The overall objective of the Environmental Testing and Verification Coatings and Coating Equipment Program is to verify pollution prevention and performance characteristics of coating technologies and make the results of the testing available to prospective coating technology use...

  5. RAPID FREEFORM SHEET METAL FORMING: TECHNOLOGY DEVELOPMENT AND SYSTEM VERIFICATION

    Energy Technology Data Exchange (ETDEWEB)

    Kiridena, Vijitha [Ford Scientific Research Lab., Dearborn, MI (United States); Verma, Ravi [Boeing Research and Technology (BR& T), Seattle, WA (United States); Gutowski, Timothy [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Roth, John [Pennsylvania State Univ., University Park, PA (United States)

    2018-03-31

    The objective of this project is to develop a transformational RApid Freeform sheet metal Forming Technology (RAFFT) in an industrial environment, which has the potential to increase manufacturing energy efficiency up to ten times, at a fraction of the cost of conventional technologies. The RAFFT technology is a flexible and energy-efficient process that eliminates the need for having geometry-specific forming dies. The innovation lies in the idea of using the energy resource at the local deformation area which provides greater formability, process control, and process flexibility relative to traditional methods. Double-Sided Incremental Forming (DSIF), the core technology in RAFFT, is a new concept for sheet metal forming. A blank sheet is clamped around its periphery and gradually deformed into a complex 3D freeform part by two strategically aligned stylus-type tools that follow a pre-described toolpath. The two tools, one on each side of the blank, can form a part with sharp features for both concave and convex shapes. Since deformation happens locally, the forming force at any instant is significantly decreased when compared to traditional methods. The key advantages of DSIF are its high process flexibility, high energy-efficiency, low capital investment, and the elimination of the need for massive amounts of die casting and machining. Additionally, the enhanced formability and process flexibility of DSIF can open up design spaces and result in greater weight savings.

  6. Radio-xenon monitoring technology for CTBT verification

    Energy Technology Data Exchange (ETDEWEB)

    An, J. S.; Yoon, W. K.; Shin, J. S.; Kim, J. S.; Lee, Y. G.; Na, W. W

    1998-03-01

    To help ensure compliance with a comprehensive nuclear test ban treaty (CTBT), it is important that monitoring technologies for detecting covert nuclear testing be available. Monitoring methods are included seismic, hydroacoustic, infra-sound, and radionuclide technologies. Conducting a test underground, underwater, under such condition, gaseous radionuclides detection would be useful method for detecting of nuclear detonation. This report described on as to performance of detecting equipment and detecting principle of radioactive described on as to performance of detecting equipment and detecting principle of radioactive noble gas detection for CTBT. Although the quantity of xenon radionuclides entering the atmosphere from a nuclear detonation may be very large, the combination of dilution in the atmosphere plus radioactive decay requires very sensitive measurements to detect these radionuclides. Furthermore, xenon radionuclides can be enter the atmosphere from sources other than nuclear detonation, including operating nuclear reactors, producing and using medical isotopes and nuclear fuel reprocessing. Since measurement of the activity ratios of xenon radionuclides is important for determine of their origin. (author). 19 refs., 13 tabs., 18 figs

  7. VZLUSAT-1: verification of new materials and technologies for space

    Science.gov (United States)

    Daniel, Vladimir; Urban, Martin; Nentvich, Ondrej; Stehlikova, Veronika

    2016-09-01

    CubeSats are a good opportunity to test new technologies and materials on orbit. These innovations can be later used for improving of properties and life length of Cubesat or other satellites as well. VZLUSAT-1 is a small satellite from the CubeSat family, which will carry a wide scale of payloads with different purposes. The poster is focused on measuring of degradation and properties measurement of new radiation hardened composite material in orbit due to space environment. Material properties changes can be studied by many methods and in many disciplines. One payload measures mechanical changes in dependence on Young's modulus of elasticity which is got from non-destructive testing by mechanical vibrations. The natural frequencies we get using Fast Fourier Transform. The material is tested also by several thermometers which measure heat distribution through the composite, as well as reflectivity in dependence on different coatings. The satellite also will measure the material radiation shielding properties. There are PIN diodes which measure the relative shielding efficiency of composite and how it will change in time in space environment. Last one of material space testing is measurement of outgassing from tested composite material. It could be very dangerous for other parts of satellite, like detectors, when anything was outgassing, for example water steam. There are several humidity sensors which are sensitive to steam and other gases and measures temperatures as well.

  8. New Approaches and New Technologies for the Verification of Nuclear Disarmament

    International Nuclear Information System (INIS)

    Keir, David

    2013-01-01

    ESARDA’s New Approaches/Novel Technologies Working group has recently begun to take a great interest in technology for use in arms control verification, in parallel with a focus on Nuclear Safeguards technology. A topic-based meeting of members of the NA/NT Subgroup was hosted at Joint Research Centre (JRC), ITU-Nuclear Security Unit in Ispra (Italy), to further explore the technical issues and opportunities presented by the need for new approaches and technologies in a future verified nuclear weapons dismantlement regime. Nuclear warheads must contain radioactive material and, by their nature, gamma rays and neutrons are likely to penetrate to the outside of the warhead casing and even metal containers. Therefore radiation signatures should be detectable by appropriate pieces of equipment. For this reason, researchers in the field of technical verification of nuclear warhead dismantlement have studied and developed technologies for Non-Destructive Assay (NDA). This paper presents a generic dismantlement pathway for verified nuclear warhead dismantlement, based on the scenario employed by the UK-Norway initiative for their exercise in 2008/9. Using this as a framework the types of measurement challenge likely to be presented to a verifying inspector are discussed. The problem of intrusiveness of measurements in relation to the issue of proliferative release of classified information about the warhead attributes is discussed and the concept of ‘information barriers is introduced as a possible solution to this issue. A list of candidate technologies for use in verification activities, with or without information barriers is then presented and, since most of these are new or novel approaches to the issue, an already-established system for classifying them – in terms of state of development and complexity of use in this context – is proposed. Finally, the concept of capturing this information as a library of ‘data sheets’, designed for periodic review as

  9. Application verification research of cloud computing technology in the field of real time aerospace experiment

    Science.gov (United States)

    Wan, Junwei; Chen, Hongyan; Zhao, Jing

    2017-08-01

    According to the requirements of real-time, reliability and safety for aerospace experiment, the single center cloud computing technology application verification platform is constructed. At the IAAS level, the feasibility of the cloud computing technology be applied to the field of aerospace experiment is tested and verified. Based on the analysis of the test results, a preliminary conclusion is obtained: Cloud computing platform can be applied to the aerospace experiment computing intensive business. For I/O intensive business, it is recommended to use the traditional physical machine.

  10. DOE/LLNL verification symposium on technologies for monitoring nuclear tests related to weapons proliferation

    International Nuclear Information System (INIS)

    Nakanishi, K.K.

    1993-01-01

    The rapidly changing world situation has raised concerns regarding the proliferation of nuclear weapons and the ability to monitor a possible clandestine nuclear testing program. To address these issues, Lawrence Livermore National Laboratory's (LLNL) Treaty Verification Program sponsored a symposium funded by the US Department of Energy's (DOE) Office of Arms Control, Division of Systems and Technology. The DOE/LLNL Symposium on Technologies for Monitoring Nuclear Tests Related to Weapons Proliferation was held at the DOE's Nevada Operations Office in Las Vegas, May 6--7,1992. This volume is a collection of several papers presented at the symposium. Several experts in monitoring technology presented invited talks assessing the status of monitoring technology with emphasis on the deficient areas requiring more attention in the future. In addition, several speakers discussed proliferation monitoring technologies being developed by the DOE's weapons laboratories

  11. Status and Application of Spatial Information Technology as a Nuclear Verification Tool

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Seong Youn; Shin, Jang Soo [Korea Institute of Nuclear Non-proliferation And Control, Daejeon (Korea, Republic of)

    2010-05-15

    The spatial information like satellite imagery and GIS data has been widely used for site development planning and monitoring in the area where the access is not allowed with any reason. The IAEA adopts this new method of analysis for enhancing its verification capability and is utilizing to search if there is any undeclared nuclear activities in the nuclear facilities worldwide. The ROK entered the group of the leading countries in the field of space technology with the successful launching of the KompSat I and II, and holds its high position in the IT technology which can draw useful analytic results from the satellite imagery. It implies that the ROK has some potential and related infra required for using the satellite imagery for the purpose of nuclear safeguards. However, we are in the very early stage to apply these advanced techniques to nuclear verification, because we don't have enough work forces enough to deal with these useful tools. It is necessary to review some previous examples about establishing satellite imagery analysis system like the IAEA. In this report, the IAEA's activities related verification using satellite imagery is reviewed and some examples on safeguards application is presented. A way to use satellite images for national inspection also is suggested

  12. Working Group 2: Future Directions for Safeguards and Verification, Technology, Research and Development

    International Nuclear Information System (INIS)

    Zykov, S.; Blair, D.

    2013-01-01

    For traditional safeguards it was recognized that the hardware presently available is, in general, addressing adequately fundamental IAEA needs, and that further developments should therefore focus mainly on improving efficiencies (i.e. increasing cost economies, reliability, maintainability and user-friendliness, keeping abreast of continual advancements in technologies and of the evolution of verification approaches). Specific technology areas that could benefit from further development include: -) Non-destructive measurement systems (NDA), in particular, gamma-spectroscopy and neutron counting techniques; -) Containment and surveillance tools, such as tamper indicating seals, video-surveillance, surface identification methods, etc.; -) Geophysical methods for design information verification (DIV) and safeguarding of geological repositories; and -) New tools and methods for real-time monitoring. Furthermore, the Working Group acknowledged that a 'building block' (or modular) approach should be adopted towards technology development, enabling equipment to be upgraded efficiently as technologies advance. Concerning non-traditional safeguards, in the area of satellite-based sensors, increased spatial resolution and broadened spectral range were identified as priorities. In the area of wide area surveillance, the development of LIDAR-like tools for atmospheric sensing was discussed from the perspective of both potential benefits and certain limitations. Recognizing the limitations imposed by the human brain in terms of information assessment and analysis, technologies are needed that will enable the more effective utilization of all information, regardless of its format and origin. The paper is followed by the slides of the presentation. (A.C.)

  13. Developing Effective Clinical Trainers

    Directory of Open Access Journals (Sweden)

    Kevin Khamarko

    2012-05-01

    Full Text Available Continuing education and training provides a means to improve performance among health care professionals (HCP. Research shows, however, that continuing professional education activities have inconsistent effects on HCP competence, performance, and patient health outcomes. Furthermore, the trainer’s role as a facilitator of knowledge translation (KT has been understudied. To understand how clinical trainers support their trainees in translating what they learned into practice, we conducted 16 in-depth interviews with expert trainers. These interviews yielded a variety of KT-enhancing strategies, including tailoring training activities to their trainees’ needs. In addition, participants recommended trainers familiarize themselves with their trainees’ work environments, be able to identify their knowledge deficits, and devote time to provide trainees with post-training support. Creating an effective training, one that leads to transfer, requires active planning, communication, and command of the training topic by skilled trainers.

  14. ENVIRONMENTAL TECHNOLOGY VERIFICATION, TEST REPORT OF MOBILE SOURCE EMISSIONS CONTROL DEVICES/CLEAN DIESEL TECHNOLOGIES FUEL BORNE CATALYST WITH CLEANAIR SYSTEM'S DIESEL OXIDATION CATALYST

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Fuel-Borne Catalyst with CleanAir System's Diesel Oxidation Catalyst manufactured by Clean Diesel Technologies, Inc. The technology is a fuel-borne catalyst used in ultra low sulfur d...

  15. ENVIRONMENTAL TECHNOLOGY VERIFICATION, TEST REPORT OF MOBILE SOURCE EMISSIONS CONTROL DEVICES: CLEAN DIESEL TECHNOLOGIES FUEL-BORNE CATALYST WITH MITSUI/PUREARTH CATALYZED WIRE MESH FILTER

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Fuel-Borne Catalyst with Mitsui/PUREarth Catalyzed Wire Mesh Filter manufactured by Clean Diesel Technologies, Inc. The technology is a platinum/cerium fuel-borne catalyst in commerci...

  16. US monitoring and verification technology: on-site inspection experience and future challenges

    International Nuclear Information System (INIS)

    Gullickson, R.L.; Carlson, D.; Ingraham, J.; Laird, B.

    2013-01-01

    The United States has a long and successful history of cooperation with treaty partners in monitoring and verification. For strategic arms reduction treaties, our collaboration has resulted in the development and application of systems with limited complexity and intrusiveness. As we progress beyond New START (NST) along the 'road to zero', the reduced number of nuclear weapons is likely to require increased confidence in monitoring and verification techniques. This may place increased demands on the technology to verify the presence of a nuclear weapon and even confirm the presence of a certain type. Simultaneously, this technology must include the ability to protect each treaty partner's sensitive nuclear weapons information. Mutual development of this technology by treaty partners offers the best approach for acceptance in treaty negotiations. This same approach of mutual cooperation and development is essential for developing nuclear test monitoring technology in support of the Comprehensive Nuclear Test Ban Treaty (CTBT). Our ability to detect low yield and evasive testing will be enhanced through mutually developed techniques and experiments using laboratory laser experiments and high explosives tests in a variety of locations and geologies. (authors)

  17. Technology Foresight and nuclear test verification: a structured and participatory approach

    Science.gov (United States)

    Noack, Patrick; Gaya-Piqué, Luis; Haralabus, Georgios; Auer, Matthias; Jain, Amit; Grenard, Patrick

    2013-04-01

    As part of its mandate, the CTBTO's nuclear explosion monitoring programme aims to maintain its sustainability, effectiveness and its long-term relevance to the verification regime. As such, the PTS is conducting a Technology Foresight programme of activities to identify technologies, processes, concepts and ideas that may serve said purpose and become applicable within the next 20 years. Through the Technology Foresight activities (online conferences, interviews, surveys, workshops and other) we have involved the wider science community in the fields of seismology, infrasound, hydroacoustics, radionuclide technology, remote sensing and geophysical techniques. We have assembled a catalogue of over 200 items, which incorporate technologies, processes, concepts and ideas which will have direct future relevance to the IMS (International Monitoring System), IDC (International Data Centre) and OSI (On-Site Inspection) activities within the PTS. In order to render this catalogue as applicable and useful as possible for strategy and planning, we have devised a "taxonomy" based on seven categories, against which each technology is assessed through a peer-review mechanism. These categories are: 1. Focus area of the technology in question: identify whether the technology relates to (one or more of the following) improving our understanding of source and source physics; propagation modelling; data acquisition; data transport; data processing; broad modelling concepts; quality assurance and data storage. 2. Current Development Stage of the technology in question. Based on a scale from one to six, this measure is specific to PTS needs and broadly reflects Technology Readiness Levels (TRLs). 3. Impact of the technology on each of the following capabilities: detection, location, characterization, sustainment and confidence building. 4. Development cost: the anticipated monetary cost of validating a prototype (i.e. Development Stage 3) of the technology in question. 5. Time to

  18. CTBT verification-related technologies for peaceful purposes: the French experiences of international cooperation

    International Nuclear Information System (INIS)

    Massinon, B.

    1999-01-01

    The French experience concerning CTBT verification-related technologies for peaceful purposes as well a the international cooperation in this field are presented. Possible objectives and cooperation program needs are cited. French experience in international cooperation is related to seismology and seismic hazards in Bolivia, Madagascar, Nepal and Indonesia and is considered as very constructive, meaning that technical experience is developed, consistent scientific results are obtained, and a considerable yield to the CTBT task is achieved. Large scientific benefits are expected from the CTBTO

  19. HTML5 24-Hour Trainer

    CERN Document Server

    Lowery, Joseph W

    2011-01-01

    Comprehensive written and interactive instruction for learning HTML5 HTML is the core technology for building websites. Today, with HTML5 opening the Internet to new levels of rich content and dynamic interactivity, developers are looking for information to learn and utilize HTML5. HTML5 24-Hour Trainer provides that information, giving new and aspiring web developers the knowledge they need to achieve early success when building websites. Covers the most basic aspects of a web page, including a brief introduction to Cascading Style Sheets (CSS) Provides lessons that are backed up by prof

  20. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: UTC FUEL CELLS' PC25C POWER PLANT - GAS PROCESSING UNIT PERFORMANCE FOR ANAEROBIC DIGESTER GAS

    Science.gov (United States)

    Under EPA’s Environmental Technology Verification program, which provides objective and scientific third party analysis of new technology that can benefit the environment, a combined heat and power system based on the UTC Fuel Cell's PC25C Fuel Cell Power Plant was evaluated. The...

  1. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, SWINE WASTE ELECTRIC POWER AND HEAT PRODUCTION--MARTIN MACHINERY INTERNAL COMBUSTION ENGINE

    Science.gov (United States)

    Under EPA’s Environmental Technology Verification program, which provides objective and scientific third party analysis of new technology that can benefit the environment, a combined heat and power system designed by Martin Machinery was evaluated. This paper provides test result...

  2. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT-A AND A ENVIRONMENTAL SEALS, INC., SEAL ASSIST SYSTEM (SAS) PHASE II REPORT

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of Seal Assist System (SAS) for natural gas reciprocating compressor rod packing manufactured by A&A Environmental Seals, Inc. The SAS uses a secondary containment gland to collect natural g...

  3. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: RESIDENTIAL ELECTRIC POWER GENERATION USING THE PLUG POWER SU1 FUEL CELL SYSTEM

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Plug Power SU1 Fuel Cell System manufactured by Plug Power. The SU1 is a proton exchange membrane fuel cell that requires hydrogen (H2) as fuel. H2 is generally not available, so the ...

  4. ENVIRONMENTAL TECHNOLOGY VERIFICATION--TEST REPORT OF MOBILE SOURCE EMISSION CONTROL DEVICES, CUMMINS EMISSION SOLUTIONS AND CUMMINS FILTRATION DIESEL OXIDATION CATALYST AND CLOSED CRANKCASE VENTILATION SYSTEM

    Science.gov (United States)

    The U.S. EPA has created the Environmental Technology Verification (ETV) Program. ETV seeks to provide high-quality, peer-reviewed data on technology performance. The Air Pollution Control Technology (APCT) Verification Center, a center under the ETV Program, is operated by Res...

  5. Sandia technology. Volume 13, number 2 Special issue: verification of arms control treaties

    International Nuclear Information System (INIS)

    1989-01-01

    Nuclear deterrence, a cornerstone of US national security policy, has helped prevent global conflict for over 40 years. The DOE and DoD share responsibility for this vital part of national security. The US will continue to rely on nuclear deterrence for the foreseeable future. In the late 1950s, Sandia developed satellite-borne nuclear burst detection systems to support the treaty banning atmospheric nuclear tests. This activity has continued to expand and diversify. When the Non-Proliferation Treaty was ratified in 1970, we began to develop technologies to protect nuclear materials from falling into unauthorized hands. This program grew and now includes systems for monitoring the movement and storage of nuclear materials, detecting tampering, and transmiting sensitive data securely. In the late 1970s, negotiations to further limit underground nuclear testing were being actively pursued. In less than 18 months, we fielded the National Seismic Station, an unattended observatory for in-country monitoring of nuclear tests. In the mid-l980s, arms-control interest shifted to facility monitoring and on-site inspection. Our Technical On-site Inspection Facility is the national test bed for perimeter and portal monitoring technology and the prototype for the inspection portal that was recently installed in the USSR under the Intermediate-Range Nuclear Forces accord. The articles in the special issue of Sundiu Technology describe some of our current contributions to verification technology. This work supports the US policy to seek realistic arms control agreements while maintaining our national security.

  6. Sandia technology. Volume 13, number 2 Special issue : verification of arms control treaties.

    Energy Technology Data Exchange (ETDEWEB)

    1989-03-01

    Nuclear deterrence, a cornerstone of US national security policy, has helped prevent global conflict for over 40 years. The DOE and DoD share responsibility for this vital part of national security. The US will continue to rely on nuclear deterrence for the foreseeable future. In the late 1950s, Sandia developed satellite-borne nuclear burst detection systems to support the treaty banning atmospheric nuclear tests. This activity has continued to expand and diversify. When the Non-Proliferation Treaty was ratified in 1970, we began to develop technologies to protect nuclear materials from falling into unauthorized hands. This program grew and now includes systems for monitoring the movement and storage of nuclear materials, detecting tampering, and transmiting sensitive data securely. In the late 1970s, negotiations to further limit underground nuclear testing were being actively pursued. In less than 18 months, we fielded the National Seismic Station, an unattended observatory for in-country monitoring of nuclear tests. In the mid-l980s, arms-control interest shifted to facility monitoring and on-site inspection. Our Technical On-site Inspection Facility is the national test bed for perimeter and portal monitoring technology and the prototype for the inspection portal that was recently installed in the USSR under the Intermediate-Range Nuclear Forces accord. The articles in the special issue of Sundiu Technology describe some of our current contributions to verification technology. This work supports the US policy to seek realistic arms control agreements while maintaining our national security.

  7. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BAGHOUSE FILTRATION PRODUCTS, BWF AMERICA, INC. GRADE 700 MPS POLYESTER FELT FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size for particles equal to or smaller than...

  8. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BAGHOUSE FILTRATION PRODUCTS, W.L. GORE & ASSOCIATES, INC. LYSB3 FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size for particles equal to or smaller than...

  9. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, W.L. GORE & ASSOCIATES, INC., L4427 FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

  10. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - LEAD IN DUST WIPE MEASUREMENT TECHNOLOGY, PALINTEST, SCANNING ANALYZER , SA-5000 SYSTEM

    Science.gov (United States)

    ETV works in partnership with recognized standards and testing organizations and stakeholder groups consisting of regulators, buyers, and vendor organizations, with the full participation of individual technology developers. The program evaluates the performance of innovative

  11. Students' Use of Technological Tools for Verification Purposes in Geometry Problem Solving

    Science.gov (United States)

    Papadopoulos, Ioannis; Dagdilelis, Vassilios

    2008-01-01

    Despite its importance in mathematical problem solving, verification receives rather little attention by the students in classrooms, especially at the primary school level. Under the hypotheses that (a) non-standard tasks create a feeling of uncertainty that stimulates the students to proceed to verification processes and (b) computational…

  12. Vision Trainer Teaches Focusing Techniques at Home

    Science.gov (United States)

    2015-01-01

    Based on work Stanford Research Institute did for Ames Research Center, Joseph Trachtman developed a vision trainer to treat visual focusing problems in the 1980s. In 2014, Trachtman, operating out of Seattle, released a home version of the device called the Zone-Trac. The inventor has found the biofeedback process used by the technology induces an alpha-wave brain state, causing increased hand-eye coordination and reaction times, among other effects

  13. Glimpses for Effective implementation of Virtual Trainer

    OpenAIRE

    S.Arumuga perumal

    2007-01-01

    This paper discusses and suggests some ideas and necessary changes in implementation of virtual trainer in an organization. With the invention of new technologies like high speed computer networks and multimedia computers, there is an increasing awareness that direct face to face teaching is not the only possible mode of training methodology in an organization. There is a demand for preparing high quality multimedia training material across all faculties, which can be used...

  14. Research on key technology of the verification system of steel rule based on vision measurement

    Science.gov (United States)

    Jia, Siyuan; Wang, Zhong; Liu, Changjie; Fu, Luhua; Li, Yiming; Lu, Ruijun

    2018-01-01

    The steel rule plays an important role in quantity transmission. However, the traditional verification method of steel rule based on manual operation and reading brings about low precision and low efficiency. A machine vison based verification system of steel rule is designed referring to JJG1-1999-Verificaiton Regulation of Steel Rule [1]. What differentiates this system is that it uses a new calibration method of pixel equivalent and decontaminates the surface of steel rule. Experiments show that these two methods fully meet the requirements of the verification system. Measuring results strongly prove that these methods not only meet the precision of verification regulation, but also improve the reliability and efficiency of the verification system.

  15. Determination of multi-GNSS pseudo-absolute code biases and verification of receiver tracking technology

    Science.gov (United States)

    Villiger, Arturo; Schaer, Stefan; Dach, Rolf; Prange, Lars; Jäggi, Adrian

    2017-04-01

    It is common to handle code biases in the Global Navigation Satellite System (GNSS) data analysis as conventional differential code biases (DCBs): P1-C1, P1-P2, and P2-C2. Due to the increasing number of signals and systems in conjunction with various tracking modes for the different signals (as defined in RINEX3 format), the number of DCBs would increase drastically and the bookkeeping becomes almost unbearable. The Center for Orbit Determination in Europe (CODE) has thus changed its processing scheme to observable-specific signal biases (OSB). This means that for each observation involved all related satellite and receiver biases are considered. The OSB contributions from various ionosphere analyses (geometry-free linear combination) using different observables and frequencies and from clock analyses (ionosphere-free linear combination) are then combined on normal equation level. By this, one consistent set of OSB values per satellite and receiver can be obtained that contains all information needed for GNSS-related processing. This advanced procedure of code bias handling is now also applied to the IGS (International GNSS Service) MGEX (Multi-GNSS Experiment) procedure at CODE. Results for the biases from the legacy IGS solution as well as the CODE MGEX processing (considering GPS, GLONASS, Galileo, BeiDou, and QZSS) are presented. The consistency with the traditional method is confirmed and the new results are discussed regarding the long-term stability. When processing code data, it is essential to know the true observable types in order to correct for the associated biases. CODE has been verifying the receiver tracking technologies for GPS based on estimated DCB multipliers (for the RINEX 2 case). With the change to OSB, the original verification approach was extended to search for the best fitting observable types based on known OSB values. In essence, a multiplier parameter is estimated for each involved GNSS observable type. This implies that we could

  16. ENVIRONMENTAL TECHNOLOGY VERIFICATION JOINT (NSF-EPA) VERIFICATION STATEMENT AND REPORT, PERFORMANCE OF INDUCTION MIXERS FOR DISINFECTION OF WET WEATHER FLOWS, US FILTER/STRANCO PRODUCTS WATER CHAMP R F SERIES CHEMICAL INDUCTION SYSTEM

    Science.gov (United States)

    The Wet-Weather Flow Technologies Pilot of the EPA's Technology Verification (ETV) Program under a partnership with NSF International has verified the performawnce of the USFilter/Stranco Products chemical induction mixer used for disinfection of wet-weather flows. The USFilter t...

  17. Quality Assurance in Environmental Technology Verification (ETV): Analysis and Impact on the EU ETV Pilot Programme Performance

    Science.gov (United States)

    Molenda, Michał; Ratman-Kłosińska, Izabela

    2018-03-01

    Many innovative environmental technologies never reach the market because they are new and cannot demonstrate a successful track record of previous applications. This fact is a serious obstacle on their way to the market. Lack of credible data on the performance of a technology causes mistrust of investors in innovations, especially from public sector, who seek effective solutions however without compromising the technical and financial risks associated with their implementation. Environmental technology verification (ETV) offers a credible, robust and transparent process that results in a third party confirmation of the claims made by the providers about the performance of the novel environmental technologies. Verifications of performance are supported by high quality, independent test data. In that way ETV as a tool helps establish vendor credibility and buyer confidence. Several countries across the world have implemented ETV in the form of national or regional programmes. ETV in the European Union was implemented as a voluntary scheme if a form of a pilot programme. The European Commission launched the Environmental Technology Pilot Programme of the European Union (EU ETV) in 2011. The paper describes the European model of ETV set up and put to operation under the Pilot Programme of Environmental Technologies Verification of the European Union. The goal, objectives, technological scope, involved entities are presented. An attempt has been made to summarise the results of the EU ETV scheme performance available for the period of 2012 when the programme has become fully operational until the first half of 2016. The study was aimed at analysing the overall organisation and efficiency of the EU ETV Pilot Programme. The study was based on the analysis of the documents the operation of the EU ETV system. For this purpose, a relevant statistical analysis of the data on the performance of the EU ETV system provided by the European Commission was carried out.

  18. BEval: A Plug-in to Extend Atelier B with Current Verification Technologies

    Directory of Open Access Journals (Sweden)

    Valério Medeiros Jr.

    2014-01-01

    Full Text Available This paper presents BEval, an extension of Atelier B to improve automation in the verification activities in the B method or Event-B. It combines a tool for managing and verifying software projects (Atelier B and a model checker/animator (ProB so that the verification conditions generated in the former are evaluated with the latter. In our experiments, the two main verification strategies (manual and automatic showed significant improvement as ProB's evaluator proves complementary to Atelier B built-in provers. We conducted experiments with the B model of a micro-controller instruction set; several verification conditions, that we were not able to discharge automatically or manually with AtelierB's provers, were automatically verified using BEval.

  19. Are family practice trainers and their host practices any better? comparing practice trainers and non-trainers and their practices

    NARCIS (Netherlands)

    Hombergh, P. van den; Schalk-Soekar, S.; Kramer, A.; Bottema, B.J.; Campbell, S.M.; Braspenning, J.C.

    2013-01-01

    BACKGROUND: Family Physician (FP) trainees are expected to be provided with high quality training in well organized practice settings. This study examines differences between FP trainers and non-trainers and their practices to see whether there are differences in trainers and non-trainers and in how

  20. The development of advanced instrumentation and control technology -The development of verification and validation technology for instrumentation and control in NPPs-

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Kee Choon; Ham, Chang Sik; Lee, Byung Sun; Kim, Jung Taek; Park, Won Man; Park, Jae Chang; Lee, Jang Soo; Um, Heung Sub; Kim, Jang Yul; Ryoo, Chan Hoh; Joo, Jae Yoon; Song, Soon Ja [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    We collected and analyzed the domestic/international codes, standards and guidelines to develop high reliable software verification and validation methodology which is satisfied to our real situation. The three major parts of work are performed that is the construction of the frame for high reliable software development environment, establishment of high reliable software development methodology and study for the basic technology related to safety-critical software. These three parts are tightly coupled each other to achieve self-reliable software verification and validation technology for digital I and C in NPPs. The configuration of hardware and software are partly performed using requirements which is developed in first stage for the development of I and C test facility. In hardware part, expanded interface using VXI bus and driving software is completed. The main program for math, modelling and supervisor program for instructions are developed. 27 figs, 22 tabs, 69 refs. (Author).

  1. Working with a personal trainer

    Science.gov (United States)

    ... sessions? What services do I get for that price? Are there any other fees I need to ... enough for exercise. Alternative Names Exercise - personal trainer References American College of Sports Medicine. Using a Personal ...

  2. ENVIRONMENTAL TECHNOLOGY VERIFICATION: TEST REPORT OF MOBILE SOURCE EMISSION CONTROL DEVICES--PUREM NORTH AMERICA LLC, PMF GREENTEC 1004205.00.0 DIESEL PARTICULATE FILTER

    Science.gov (United States)

    The U.S. EPA has created the Environmental Technology Verification (ETV) program to provide high quality, peer reviewed data on technology performance to those involved in the design, distribution, financing, permitting, purchase, and use of environmental technologies. The Air Po...

  3. Evaluation of detector array technology for the verification of advanced intensity-modulated radiotherapy

    Science.gov (United States)

    Hussien, Mohammad

    Purpose: Quality assurance (QA) for intensity modulated radiotherapy (IMRT) has evolved substantially. In recent years, various ionization chamber or diode detector arrays have become commercially available, allowing pre-treatment absolute dose verification with near real-time results. This has led to a wide uptake of this technology to replace point dose and film dosimetry and to facilitate QA streamlining. However, arrays are limited by their spatial resolution giving rise to concerns about their response to clinically relevant deviations. The common factor in all commercial array systems is the reliance on the gamma index (γ) method to provide the quantitative evaluation of the measured dose distribution against the Treatment Planning System (TPS) calculated dose distribution. The mathematical definition of the gamma index presents computational challenges that can cause a variation in the calculation in different systems. The purpose of this thesis was to evaluate the suitability of detector array systems, combined with their implementation of the gamma index, in the verification and dosimetry audit of advanced IMRT. Method: The response of various commercial detector array systems (Delta4®, ArcCHECK®, and the PTW 2D-Array seven29™ and OCTAVIUS II™ phantom combination, Gafchromic® EBT2 and composite EPID measurements) to simulated deliberate changes in clinical IMRT and VMAT plans was evaluated. The variability of the gamma index calculation in the different systems was also evaluated by comparing against a bespoke Matlab-based gamma index analysis software. A novel methodology for using a commercial detector array in a dosimetry audit of rotational radiotherapy was then developed. Comparison was made between measurements using the detector array and those performed using ionization chambers, alanine and radiochromic film. The methodology was developed as part of the development of a national audit of rotational radiotherapy. Ten cancer centres were

  4. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: IN-DRAIN TREATMENT DEVICE. HYDRO INTERNATIONAL UP-FLO™ FILTER

    Science.gov (United States)

    Verification testing of the Hydro International Up-Flo™ Filter with one filter module and CPZ Mix™ filter media was conducted at the Penn State Harrisburg Environmental Engineering Laboratory in Middletown, Pennsylvania. The Up-Flo™ Filter is designed as a passive, modular filtr...

  5. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, MIRATECH CORPORATIONM GECO 3001 AIR/FUEL RATIO CONTROLLER

    Science.gov (United States)

    Details on the verification test design, measurement test procedures, and Quality assurance/Quality Control (QA/QC) procedures can be found in the test plan titled Testing and Quality Assurance Plan, MIRATECH Corporation GECO 3100 Air/Fuel Ratio Controller (SRI 2001). It can be d...

  6. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, HVLP COATING EQUIPMENT, SHARPE MANUFACTURING COMPANY PLATINUM 2012 HVLP SPRAY GUN

    Science.gov (United States)

    This report presents the results of the verification test of the Sharpe Platinum 2013 high-volume, low-pressure gravity-feed spray gun, hereafter referred to as the Sharpe Platinum, which is designed for use in automotive refinishing. The test coating chosen by Sharpe Manufacturi...

  7. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: DEVILBISS JGHV-531-46FF HVLP SPRAY GUN

    Science.gov (United States)

    This report presents the results of the verification test of the DeVilbiss JGHV-531-46FF high-volume, low-pressure pressure-feed spray gun, hereafter referred to as the DeVilbiss JGHV, which is designed for use in industrial finishing. The test coating chosen by ITW Industrial Fi...

  8. An overview of CTBT verification technologies and status of IMS networks

    International Nuclear Information System (INIS)

    Basham, P.

    2002-01-01

    The CTBT history is described in brief. Nuclear test environments and verification regime are presented with illustrations. Geographical location of seismic, hydroacoustic, infrasound and radionuclide monitoring networks are indicated on globe maps. Benefits of the International Monitoring System (IMS) to host countries are listed

  9. About the problems of teaching future teacher-trainers in the condition of informatization of education

    Directory of Open Access Journals (Sweden)

    Бакитжан Калжанович Мухамеджанов

    2014-12-01

    Full Text Available In this article are considered actuality of informatization of professional education, about problems of readiness to use information and computer technology of professional activity of future teacher-trainers. Authors state that according to the accepted concept of the education, the offered technology of creation of models of activity of future teacher-trainers in most part has to be realized on the basis of information technology. Training of future teacher-trainers on the computer technologies, created on the basis of activity models of specialists, is applicable for model of training of specialists to natural-science specialties.

  10. High-definition displays for realistic simulator and trainer systems

    Science.gov (United States)

    Daniels, Reginald; Hopper, Darrel G.; Beyer, Steve; Peppler, Philipp W.

    1998-09-01

    Current flight simulators and trainers do not provide acceptable levels of visual display performance (performance that would allow ground based trainers to economically replace aircraft flying training) for many air-to-air and air-to- ground training scenarios. Ground training for pilots could be made significantly more realistic, allowing the ground-based curricula to be enlarged. The enhanced ground based training could then more readily augment actual aircraft flying (training) time. This paper presents the technology need and opportunity to create a new class of immersive simulator- trainer systems having some 210 million pixels characterized especially by a 20-20 visual acuity synthetic vision system having some 150 million pixels. The same new display technology base is needed for planned crew stations for uninhabited combat air vehicles (UCAV), advanced aircraft cockpits and mission crewstations, and for the space plane.

  11. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: STORMWATER SOURCE AREA TREATMENT DEVICE — BAYSAVER TECHNOLOGIES, INC. BAYSAVER SEPARATION SYSTEM, MODEL 10K

    Science.gov (United States)

    Verification testing of the BaySaver Separation System, Model 10K was conducted on a 10 acre drainage basin near downtown Griffin, Georgia. The system consists of two water tight pre-cast concrete manholes and a high-density polyethylene BaySaver Separator Unit. The BaySaver Mod...

  12. Social-pedagogical aspects of trainer's activity

    Directory of Open Access Journals (Sweden)

    Kramskoy S.I.

    2012-11-01

    Full Text Available Analysed social-pedagogical aspect of activity of trainer-teacher on preparation of sporting reserve of different level. Activity of trainer is studied on forming socially-active personalities of sportsman. The personal long-term experience is presented to trainer-teaching works of child's trainer, trainer of student command, trainer of command of major league on a handball. It is shown that multilateral activity of trainer is estimated not only the sporting results of his pupils but also has considerably more wide circle of influence on the ward. Influence of employments is represented sport on forming socially-meaningful qualities of personality. It is marked that to the basic personal qualities of trainer behave: creative activity, flexibility of mind, industriousness, honesty, disinterestedness, of principle, self-control, demand, modesty, culture.

  13. [Peer feedback for trainers in general practice].

    Science.gov (United States)

    Damoiseaux, R A M J; Truijens, L

    2016-01-01

    In medical specialist training programmes it is common practice for residents to provide feedback to their medical trainers. The problem is that due to its anonymous nature, the feedback often lacks the specificity necessary to improve the performance of trainers. If anonymity is to be abolished, there is a need for residents to feel safe in giving their feedback. Another way to improve the performance of trainers might be peer feedback. For peer feedback it is necessary that trainers observe each other during their training sessions with the residents. In speciality training in general practice peer feedback is done in group sessions of 12 trainers. They show videos of their training sessions and get feedback from their fellow trainers. Trainers also visit each other in their practices to observe training sessions and provide feedback. In order to improve trainer performance there is a need for more focus on peer feedback in medical specialist training programmes.

  14. Evolution of a NASTRAN trainer

    Science.gov (United States)

    Grooms, H. R.; Hinz, P. J.; Collier, M. A.

    1992-01-01

    The development is traced of a NASTRAN training system. The design and organization of the program is examined, including the static and dynamic modules. A discussion of how user feedback, in the form of questionnaire responses, was used to evaluate and improve the trainer is included. The trainer was used by a number of engineers, who found it to be a versatile low cost tool. It is particularly helpful in bridging the gap from theory to practical application of the finite element method for structural analysis. The program, along with documentation, is available through COSMIC.

  15. Job satisfaction of self employed trainers and personal trainers ...

    African Journals Online (AJOL)

    Personal trainers are responsible for the effective delivery of health and fitness programmes. Their roles are of importance to the fitness industry and therefore, the degree of job satisfaction they experience is of prime importance. The purpose of this paper is to identify the various factors that play a role in determining the job ...

  16. Non proliferation regimes undertakings: Benefits and limits of synergies in verification technologies and procedures

    International Nuclear Information System (INIS)

    Richard, M.

    2001-01-01

    Full text: Thirty years ago the NPT was entering into force. Therewith, when a State became party to the NPT, it had, in accordance with article III.1 of the Treaty, an undertaking to conclude a Comprehensive Safeguards agreement with the IAEA and accept safeguards verification on source or special fissionable material in all peaceful nuclear activities within its territories in order to verify that such material is not diverted. This multilateral instrument was the foundation stone of the non-proliferation regime and marked the actual birth of internationally accepted measures to verily compliance with politically stringent agreements. Since that time several important multilateral or bilateral instruments on non-proliferation and disarmament have been negotiated and adopted to curb the development and the acquisition of Weapons of Mass Destruction (WMD) most of them since the middle of the eighties and the collapse of the Soviet Union. Amongst the multilateral instruments are the Convention on the Prohibition of Bacteriological Weapon and Toxin Weapons (1972), the Convention on the Prohibition of Chemical Weapons (1993), the Comprehensive Test Ban Treaty (1996), the Strengthening of the IAEA Safeguards and the Additional Protocol (1997), with some still in negotiation like the Protocol of the Convention on the Prohibition of Bacteriological and Toxin Weapons, and some on which negotiation is still a wish like the Fissile Material Cut-off Treaty. Bilateral disarmament agreements between the United States of America and the Russian Federation such as the INF Treaty, START I and II, the agreements on the elimination of excess defence nuclear material as well as the Trilateral Initiative with the IAEA pave the way to nuclear disarmament with the reduction of both the number of nuclear weapons arsenal and the fissile material inventories. The politically stringent undertakings of States that have become parties to those agreements would not be possible without the

  17. Effectiveness of box trainers in laparoscopic training

    Directory of Open Access Journals (Sweden)

    Dhariwal Anender

    2007-01-01

    Full Text Available Rationale and Objectives: Various devices are used to aid in the education of laparoscopic skills ranging from simple box trainers to sophisticated virtual reality trainers. Virtual reality system is an advanced and effective training method, however it is yet to be adopted in India due to its cost and the advanced technology required for it. Therefore, box trainers are being used to train laparoscopic skills. Hence this study was undertaken to assess the overall effectiveness of the box-training course. Study Procedure: The study was conducted during six-day laparoscopic skills training workshops held during 2006. Twenty five surgeons; age range of 26 to 45 years, of either sex, who had not performed laparoscopic surgery before; attending the workshop were evaluated. Each participant was given a list of tasks to perform before beginning the box-training course on day one and was evaluated quantitatively by rating the successful completion of each test. Evaluation began when the subject placed the first tool into the cannula and ended with task completion. Two evaluation methods used to score the subject, including a global rating scale and a task-specific checklist. After the subject completed all sessions of the workshop, they were asked to perform the same tasks and were evaluated in the same manner. For each task completed by the subjects, the difference in the scores between the second and first runs were calculated and interpreted as an improvement as a percentage of the initial score. Statistical Analysis: Wilcoxon matched-paired signed-ranks test was applied to find out the statistical significance of the results obtained. Results: The mean percentage improvement in scores for both the tasks, using global rating scale, was 44.5% + 6.930 (Mean + SD. For task 1, using the global rating scale mean percentage improvement was 49.4% + 7.948 (Mean + SD. For task 2, mean percentage improvement using global rating scale was 39.6% + 10.4 (Mean

  18. ENVIRONMENTAL TECHNOLOGY VERIFICATION: JOINT (NSF-EPA) VERIFICATION STATEMENT AND REPORT: BROME AGRI SALES, LTD., MAXIMIZER SEPARATOR, MODEL MAX 1016 - 03/01/WQPC-SWP

    Science.gov (United States)

    Verification testing of the Brome Agri Sales Ltd. Maximizer Separator, Model MAX 1016 (Maximizer) was conducted at the Lake Wheeler Road Field Laboratory Swine Educational Unit in Raleigh, North Carolina. The Maximizer is an inclined screen solids separator that can be used to s...

  19. CANDU RU fuel manufacturing basic technology development and advanced fuel verification tests

    International Nuclear Information System (INIS)

    Chung, Chang Hwan; Chang, S.K.; Hong, S.D.

    1999-04-01

    A PHWR advanced fuel named the CANFLEX fuel has been developed through a KAERI/AECL joint Program. The KAERI made fuel bundle was tested at the KAERI Hot Test Loop for the performance verification of the bundle design. The major test activities were the fuel bundle cross-flow test, the endurance fretting/vibration test, the freon CHF test, and the fuel bundle heat-up test. KAERI also has developing a more advanced PHWR fuel, the CANFLEX-RU fuel, using recovered uranium to extend fuel burn-up in the CANDU reactors. For the purpose of proving safety of the RU handling techniques and appraising feasibility of the CANFLEX-RU fuel fabrication in near future, a physical, chemical and radiological characterization of the RU powder and pellets was performed. (author). 54 refs., 46 tabs., 62 figs

  20. CANDU RU fuel manufacturing basic technology development and advanced fuel verification tests

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Chang Hwan; Chang, S.K.; Hong, S.D. [and others

    1999-04-01

    A PHWR advanced fuel named the CANFLEX fuel has been developed through a KAERI/AECL joint Program. The KAERI made fuel bundle was tested at the KAERI Hot Test Loop for the performance verification of the bundle design. The major test activities were the fuel bundle cross-flow test, the endurance fretting/vibration test, the freon CHF test, and the fuel bundle heat-up test. KAERI also has developing a more advanced PHWR fuel, the CANFLEX-RU fuel, using recovered uranium to extend fuel burn-up in the CANDU reactors. For the purpose of proving safety of the RU handling techniques and appraising feasibility of the CANFLEX-RU fuel fabrication in near future, a physical, chemical and radiological characterization of the RU powder and pellets was performed. (author). 54 refs., 46 tabs., 62 figs.

  1. Are family practice trainers and their host practices any better? Comparing practice trainers and non-trainers and their practices.

    Science.gov (United States)

    van den Hombergh, Pieter; Schalk-Soekar, Saskia; Kramer, Anneke; Bottema, Ben; Campbell, Stephen; Braspenning, Jozé

    2013-02-21

    Family Physician (FP) trainees are expected to be provided with high quality training in well organized practice settings. This study examines differences between FP trainers and non-trainers and their practices to see whether there are differences in trainers and non-trainers and in how their practices are organized and their services are delivered. 203 practices (88 non-training and 115 training) with 512 FPs (335 non-trainers and 177 trainers) were assessed using the "Visit Instrument Practice organization (VIP)" on 369 items (142 FP-level; 227 Practice level). Analyses (ANOVA, ANCOVA) were conducted for each level by calculating differences between FP trainees and non-trainees and their host practices. Trainers scored higher on all but one of the items, and significantly higher on 47 items, of which 13 remained significant after correcting for covariates. Training practices scored higher on all items and significantly higher on 61 items, of which 23 remained significant after correcting for covariates. Trainers (and training practices) provided more diagnostic and therapeutic services, made better use of team skills and scored higher on practice organization, chronic care services and quality management than non-training practices. Trainers reported more job satisfaction and commitment and less job stress than non-trainers. There are positive differences between FP trainers and non-trainers in both the level and the quality of services provided by their host practices. Training institutions can use this information to promote the advantages of becoming a FP trainer and training practice as well as to improve the quality of training settings for FPs.

  2. MAGMAsoft simulation applied in verification of technology to produce new range of alloy steel castings

    Directory of Open Access Journals (Sweden)

    A. Gwiżdż

    2010-07-01

    Full Text Available The article presents the results of MAGMAsoft application in simulation of the pouring and solidfication of castings made fromGS20Mn5 steel, basing on some principles adopted in the starting technology. The results of simulation were disclosed in the form of 3Ddrawings, showing the technology of pouring, selected stages of solidification, and porosity in castings made by the examined technology. Using simulation results, some modifications were introduced to the pouring technology, the simulation was repeated, and the results obtained for the technology before and after the modification were compared. Based on the guidelines provided in new technology, the pattern tooling was made. The process of mould preparation was described, along with the process of steel melting and pouring. Castings made by the new technology were X-rayed and subjected to heat treatment according to the newly developed cycle. Together with the main casting, test wedges were poured. Mechanical tests and structure examinations were performed. The results of the tests and investigations were evaluated.

  3. The experimental verification of the condition of the magnetic material caused by different technological processes

    CERN Document Server

    Tumanski, S

    2000-01-01

    The changes of electrical steel parameters caused by different technological processes have been tested using the magnetovision method. The effects of cutting into the strips, stamping the shape, laser scribing, annealing, bending and stressing have been investigated.

  4. Test/QA Plan for Verification of Coliform Detection Technologies for Drinking Water

    Science.gov (United States)

    The coliform detection technologies to be tested use chromatogenic and fluorogenic growth media to detect coliforms and E. coli based on the enzymatic activity of these organisms. The systems consist of single-use sample containers that contain pre-measured reagents and can be u...

  5. Excel VBA 24-hour trainer

    CERN Document Server

    Urtis, Tom

    2015-01-01

    Master VBA automation quickly and easily to get more out of Excel Excel VBA 24-Hour Trainer, 2nd Edition is the quick-start guide to getting more out of Excel, using Visual Basic for Applications. This unique book/video package has been updated with fifteen new advanced video lessons, providing a total of eleven hours of video training and 45 total lessons to teach you the basics and beyond. This self-paced tutorial explains Excel VBA from the ground up, demonstrating with each advancing lesson how you can increase your productivity. Clear, concise, step-by-step instructions are combined wit

  6. Java programming 24-hour trainer

    CERN Document Server

    Fain, Yakov

    2015-01-01

    Quick and painless Java programming with expert multimedia instruction Java Programming 24-Hour Trainer, 2nd Edition is your complete beginner's guide to the Java programming language, with easy-to-follow lessons and supplemental exercises that help you get up and running quickly. Step-by-step instruction walks you through the basics of object-oriented programming, syntax, interfaces, and more, before building upon your skills to develop games, web apps, networks, and automations. This second edition has been updated to align with Java SE 8 and Java EE 7, and includes new information on GUI b

  7. Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

    Science.gov (United States)

    Hanley, G.

    1978-01-01

    Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

  8. INNOVATIVE TECHNOLOGY VERIFICATION REPORT "FIELD MEASUREMENT TECHNOLOGIES FOR TOTAL PETROLEUM HYDROCARBONS IN SOIL" DEXSIL CORPORATION PETROFLAG SYSTEM

    Science.gov (United States)

    The PetroFLAGTm System developed by Dexsilo Corporation (Dexsil) was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The purpose o...

  9. Morphing into a 21st Century Trainer.

    Science.gov (United States)

    Mager, R. F.

    1996-01-01

    Forces that will affect trainers into the next century include rapid change, information overload, globalization, downsizing, empowerment, and remote worksites. Key characteristics of a 21st-century trainer include performance orientation, technical skills, social skills, self-employability, bilingualism, and international competence. (JOW)

  10. Liability, Athletic Equipment, and the Athletic Trainer.

    Science.gov (United States)

    Black, Richard

    Standards of conduct, roles, and responsibilities expected of athletic trainers should be developed and disseminated. These guidelines could be used in court to show that the athletic trainer was following basic standards if he should be charged with liability. A review of liability cases involving athletic injuries received while athletes were…

  11. Imaging of Nuclear Weapon Trainers

    Energy Technology Data Exchange (ETDEWEB)

    Schwellenbach, David [National Security Technologies, LLC. (NSTec), Mercury, NV (United States)

    2017-12-06

    The Configurable Muon Tracker (CMT) is an adaptation of the existing drift tube detector commercially available from Decision Sciences International Corporation (DSIC). NSTec engineered the CMT around commercially available drift tube assemblies to make a detector that is more versatile than previous drift tube assemblies. The CMT became operational in February 2013. Traditionally, cosmic-ray muon trackers rely on near-vertical trajectory muons for imaging. Since there are scenarios where imaging using vertical trajectory muons is not practical, NSTec designed the CMT specifically for quick configurability to track muons from any trajectory. The CMT was originally designed to be changed from vertical imaging mode to horizontal imaging mode in a few hours with access to a crane or other lifting equipment. In FY14, locations for imaging weapon trainers and SNM were identified and it was determined that lifting equipment would not typically be available in experimental areas. The CMT was further modified and a portable lifting system was developed to allow reconfiguration of the CMT without access to lifting equipment at the facility. This system was first deployed at Los Alamos National Laboratory’s W-division, where several trainers were imaged in both horizontal and vertical modes. Real-time images have been compared in both modes showing that imaging can be done in both modes with the expected longer integration time for horizontal mode. Further imaging and post processing of the data is expected to continue into early FY15.

  12. Integration of multidisciplinary technologies for real time target visualization and verification for radiotherapy

    Directory of Open Access Journals (Sweden)

    Chang WC

    2014-06-01

    Full Text Available Wen-Chung Chang,1,* Chin-Sheng Chen,2,* Hung-Chi Tai,3 Chia-Yuan Liu,4,5 Yu-Jen Chen3 1Department of Electrical Engineering, National Taipei University of Technology, Taipei, Taiwan; 2Graduate Institute of Automation Technology, National Taipei University of Technology, Taipei, Taiwan; 3Department of Radiation Oncology, Mackay Memorial Hospital, Taipei, Taiwan; 4Department of Internal Medicine, Mackay Memorial Hospital, Taipei, Taiwan; 5Department of Medicine, Mackay Medical College, New Taipei City, Taiwan  *These authors contributed equally to this work Abstract: The current practice of radiotherapy examines target coverage solely from digitally reconstructed beam's eye view (BEV in a way that is indirectly accessible and that is not in real time. We aimed to visualize treatment targets in real time from each BEV. The image data of phantom or patients from ultrasound (US and computed tomography (CT scans were captured to perform image registration. We integrated US, CT, US/CT image registration, robotic manipulation of US, a radiation treatment planning system, and a linear accelerator to constitute an innovative target visualization system. The performance of this algorithm segmented the target organ in CT images, transformed and reconstructed US images to match each orientation, and generated image registration in real time mode with acceptable accuracy. This image transformation allowed physicians to visualize the CT image-reconstructed target via a US probe outside the BEV that was non-coplanar to the beam's plane. It allowed the physicians to remotely control the US probe that was equipped on a robotic arm to dynamically trace and real time monitor the coverage of the target within the BEV during a simulated beam-on situation. This target visualization system may provide a direct remotely accessible and real time way to visualize, verify, and ensure tumor targeting during radiotherapy. Keywords: ultrasound, computerized tomography

  13. CTBT verification-related technologies for peaceful purposes: Implementation of CTBT in Iran

    International Nuclear Information System (INIS)

    Ghafory-Ashtiany, M.; Hosseinie, Mohammad-Taghi

    1999-01-01

    Based on its strong policy on disarmament and non proliferation, Islamic Republic of Iran considers CTBT as one of the measures towards the safe world and free from nuclear weapons. It is believed that full implementation of this treaty increases international security as well as national security of every state signatory. It is also considered that it has many scientific and technological benefits for sustainable development of the countries. This paper deals with international monitoring system in Iran, including primary and auxiliary seismic stations, infrasound and radionuclides monitoring systems

  14. Nuclear cooperation targets global challenges. States back main pillars of the IAEA's work to strengthen nuclear safety, verification and technology transfer

    International Nuclear Information System (INIS)

    2000-01-01

    States meeting at the 44th IAEA General Conference in Vienna have set a challenging agenda for international nuclear cooperation into the 21st century that targets issues of global safety, security, and sustainable development. They adopted resolutions endorsing the Agency's programmes for strengthening activities under its three main pillars of work - nuclear verification, safety, and technology - that are closely linked to major challenges before the world. The document presents the main actions taken during the conference

  15. Verification of best available technology for the 300 Area Treated Effluent Disposal Facility (310 Facility)

    International Nuclear Information System (INIS)

    Wagner, R.N.

    1994-01-01

    This compilation of Project L-045H reference materials documents that the 300 Area Treated Effluent Disposal Facility (TEDF, also designated the 310 Facility) was designed, built, and will be operated in accordance with the best available technology (BAT) identified in the Engineering Summary Report. The facility is intended for treatment of 300 Area process sewer wastewater. The following unit operations for 300 Area process sewer water treatment are specified as: influent receipt; iron co-precipitation and sludge handling for removal of heavy metals and initial suspended solids; ion exchanged for removal of mercury and other heavy metals; ultraviolet (UV)/peroxide treatment for destruction of organic compounds, cyanide, coliforms, sulfide, and nitrite; and effluent discharge to the Columbia River with pH monitoring/control capability

  16. Development of the SEAtrace{trademark} barrier verification and validation technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, S.D.; Lowry, W.; Walsh, R.; Rao, D.V. [Science and Engineering Associates, Santa Fe, NM (United States); Williams, C. [Sandia National Labs., Albuquerque, NM (United States). Underground Storage Technology Dept.

    1998-08-01

    In-situ barrier emplacement techniques and materials for the containment of high-risk contaminants in soils are currently being developed by the Department of Energy (DOE). Because of their relatively high cost, the barriers are intended to be used in cases where the risk is too great to remove the contaminants, the contaminants are too difficult to remove with current technologies, or the potential movement of the contaminants to the water table is so high that immediate action needs to be taken to reduce health risks. Assessing the integrity of the barrier once it is emplaced, and during its anticipated life, is a very difficult but necessary requirement. Science and Engineering Associates, Inc., (SEA) and Sandia National Laboratories (SNL) have developed a quantitative subsurface barrier assessment system using gaseous tracers in support of the Subsurface Contaminants Focus Area barrier technology program. Called SEAtrace{trademark}, this system integrates an autonomous, multi-point soil vapor sampling and analysis system with a global optimization modeling methodology to locate and size barrier breaches in real time. The methodology for the global optimization code was completed and a prototype code written using simplifying assumptions. Preliminary modeling work to validate the code assumptions were performed using the T2VOC numerical code. A multi-point field sampling system was built to take soil gas samples and analyze for tracer gas concentration. The tracer concentration histories were used in the global optimization code to locate and size barrier breaches. SEAtrace{trademark} was consistently able to detect and locate leaks, even under very adverse conditions. The system was able to locate the leak to within 0.75 m of the actual value, and was able to determine the size of the leak to within 0.15 m.

  17. Testing and Demonstrating Speaker Verification Technology in Iraqi-Arabic as Part of the Iraqi Enrollment Via Voice Authentication Project (IEVAP) in Support of the Global War on Terrorism (GWOT)

    National Research Council Canada - National Science Library

    Withee, Jeffrey W; Pena, Edwin D

    2007-01-01

    This thesis documents the findings of an Iraqi-Arabic language test and concept of operations for speaker verification technology as part of the Iraqi Banking System in support of the Iraqi Enrollment...

  18. The Virtual Flier: The Link Trainer, Flight Simulation, and Pilot Identity.

    Science.gov (United States)

    Jeon, Chihyung

    2015-01-01

    The Link Trainer is often described as the first successful attempt at what we now recognize as flight simulation and even virtual reality. Instead of asking how well the device simulated flight conditions, this article shows that what the Link Trainer simulated was not the conditions of the air, but rather the conditions of the cockpit that was gradually filled with flight instruments. The article also considers the Link Trainer as a cultural space in which shifting ideas about what it meant to be a pilot were manifested. A pilot in the Link Trainer was trained into a new category of flier-the virtual flier-who was an avid reader of instruments and an attentive listener to signals. This article suggests that, by situating the pilot within new spaces, protocols, and relationships, technologies of simulation have constituted the identity of the modern pilot and other operators of machines.

  19. The experiences of female athletic trainers in the role of the head athletic trainer.

    Science.gov (United States)

    Mazerolle, Stephanie M; Burton, Laura; Cotrufo, Raymond J

    2015-01-01

    Very few women have leadership positions in athletic training (ie, head athletic training positions) in intercollegiate athletics. Research exists on the barriers to attaining the role; however, our understanding about the experiences of those currently engaged in the role is limited. To examine the experiences of female head athletic trainers as they worked toward and attained the position of head athletic trainer. Qualitative study. National Collegiate Athletic Association Division I setting. Eight female athletic trainers serving in the role of head athletic trainer participated in our study. The mean age of the participants was 45 ± 12 years, with 5 ± 1.5 years of experience in the role of head athletic trainer and 21 ± 10 years of experience as athletic trainers. We conducted phone interviews with the 8 participants following a semistructured format. Interviews were transcribed verbatim and analyzed following a general inductive approach as described by Thomas. To establish credibility, we used a peer reviewer, member checks, and multiple-analyst triangulation. Six major themes emerged from our analysis regarding the experiences of female head athletic trainers. Opportunities to become a head athletic trainer, leadership qualities, and unique personal characteristics were discussed as factors leading to the assumption of the role of the head athletic trainer. Where women hold back, family challenges, and organizational barriers speak to the potential obstacles to assuming the role of head athletic trainer. Female head athletic trainers did not seek the role, but through persistence and encouragement, they find themselves assuming the role. Leadership skills were discussed as important for success in the role of head athletic trainer. Life balancing and parenting were identified as barriers to women seeking the role of head athletic trainer.

  20. Presentation Trainer Prototype 1.0

    NARCIS (Netherlands)

    Börner, Dirk; Specht, Marcus

    2014-01-01

    This software sketch comprises the first prototype of the presentation trainer. The application uses the Microsoft Kinect sensor and was built using the Processing 1.5.1 development environment. Available under the GNU LGPL licence version 3 or higher.

  1. Formal Verification of Circuits and Systems

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Today formal verification is finding increasing acceptance in some areas, especially model abstraction and functional verification. Other major chal- lenges, like timing verification, remain before this technology can be posed as a complete alternative to simulation. This special issue is devoted to presenting some of the ...

  2. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: HVLP COATING EQUIPMENT, ITW AUTOMOTIVE REFINISHING, DEVILBISS FLG-631-318 HVLP SPRAY GUN

    Science.gov (United States)

    This report presents the results of the verification test of the DeVilbiss FLG-631-318 high-volume, low-pressure gravity-feed spray gun, hereafter referred to as the DeVilbiss FLG, which is designed for use in automotive refinishing. The test coating chosen by ITW Automotive Refi...

  3. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: HVLP COATING EQUIPMENT, ITW AUTOMOTIVE REFINISHING, DEVILBISS GTI-600G, HVLP SPRAY GUN

    Science.gov (United States)

    This report presents the results of the verification test of the DeVilbiss GTi-600G high-volume, low-pressure gravity-feed spray gun, hereafter referred to as the DeVilbiss GTi, which is designed for use in automotive refinishing. The test coating chosen by ITW Automotive Refinis...

  4. The Teacher Trainer: A Practical Journal Mainly for Modern Language Teacher Trainers, 1995.

    Science.gov (United States)

    Woodward, Tessa, Ed.

    1995-01-01

    This document consists of the three issues of "The Teacher Trainer" published during 1995. This journal of modern language teacher education contains articles by teacher trainees and teacher trainers, including: "The Use of Lesson Transcripts in Teacher Development" (Richard Cullen); "Pair and Group Work--Confessions of Ignorance" (Tessa…

  5. Verification study on technology for preliminary investigation for HLW geological disposal. Part 2. Verification of surface geophysical prospecting through establishing site descriptive models

    International Nuclear Information System (INIS)

    Kondo, Hirofumi; Suzuki, Koichi; Hasegawa, Takuma; Goto, Keiichiro; Yoshimura, Kimitaka; Muramoto, Shigenori

    2012-01-01

    The Yokosuka demonstration and validation project using Yokosuka CRIEPI site has been conducted since FY 2006 as a cooperative research between NUMO (Nuclear Waste Management Organization of Japan) and CRIEPI. The objectives of this project are to examine and to refine the basic methodology of the investigation and assessment of properties of geological environment in the stage of Preliminary Investigation for HLW geological disposal. Within Preliminary Investigation technologies, surface geophysical prospecting is an important means of obtaining information from deep geological environment for planning borehole surveys. In FY 2010, both seismic prospecting (seismic reflection and vertical seismic profiling methods) for obtaining information about geological structure and electromagnetic prospecting (magneto-telluric and time domain electromagnetic methods) for obtaining information about resistivity structure reflecting the distribution of salt water/fresh water boundary to a depth of over several hundred meters were conducted in the Yokosuka CRIEPI site. Through these surveys, the contribution of geophysical prospecting methods in the surface survey stage to improving the reliability of site descriptive models was confirmed. (author)

  6. Nuclear disarmament verification

    Energy Technology Data Exchange (ETDEWEB)

    DeVolpi, A.

    1993-12-31

    Arms control treaties, unilateral actions, and cooperative activities -- reflecting the defusing of East-West tensions -- are causing nuclear weapons to be disarmed and dismantled worldwide. In order to provide for future reductions and to build confidence in the permanency of this disarmament, verification procedures and technologies would play an important role. This paper outlines arms-control objectives, treaty organization, and actions that could be undertaken. For the purposes of this Workshop on Verification, nuclear disarmament has been divided into five topical subareas: Converting nuclear-weapons production complexes, Eliminating and monitoring nuclear-weapons delivery systems, Disabling and destroying nuclear warheads, Demilitarizing or non-military utilization of special nuclear materials, and Inhibiting nuclear arms in non-nuclear-weapons states. This paper concludes with an overview of potential methods for verification.

  7. Nuclear disarmament verification

    International Nuclear Information System (INIS)

    DeVolpi, A.

    1993-01-01

    Arms control treaties, unilateral actions, and cooperative activities -- reflecting the defusing of East-West tensions -- are causing nuclear weapons to be disarmed and dismantled worldwide. In order to provide for future reductions and to build confidence in the permanency of this disarmament, verification procedures and technologies would play an important role. This paper outlines arms-control objectives, treaty organization, and actions that could be undertaken. For the purposes of this Workshop on Verification, nuclear disarmament has been divided into five topical subareas: Converting nuclear-weapons production complexes, Eliminating and monitoring nuclear-weapons delivery systems, Disabling and destroying nuclear warheads, Demilitarizing or non-military utilization of special nuclear materials, and Inhibiting nuclear arms in non-nuclear-weapons states. This paper concludes with an overview of potential methods for verification

  8. Formal Methods Specification and Verification Guidebook for Software and Computer Systems. Volume 1; Planning and Technology Insertion

    Science.gov (United States)

    1995-01-01

    The Formal Methods Specification and Verification Guidebook for Software and Computer Systems describes a set of techniques called Formal Methods (FM), and outlines their use in the specification and verification of computer systems and software. Development of increasingly complex systems has created a need for improved specification and verification techniques. NASA's Safety and Mission Quality Office has supported the investigation of techniques such as FM, which are now an accepted method for enhancing the quality of aerospace applications. The guidebook provides information for managers and practitioners who are interested in integrating FM into an existing systems development process. Information includes technical and administrative considerations that must be addressed when establishing the use of FM on a specific project. The guidebook is intended to aid decision makers in the successful application of FM to the development of high-quality systems at reasonable cost. This is the first volume of a planned two-volume set. The current volume focuses on administrative and planning considerations for the successful application of FM.

  9. O Personal Trainer na Perspectiva do Marketing

    Directory of Open Access Journals (Sweden)

    Cibele Biehl Bossle

    2011-03-01

    Full Text Available Esse estudo apresenta mapeamento das referências dedicadas à formação do personal trainer em bases de dados eletrônicas. Essa garimpagem revelou baixa produção científica sobre o assunto e mostrou que na literatura sobre personal trainer predominam livros com linguagem corrente no mundo dos negócios. Esses achados nos levaram a indagar sobre a força do discurso físico-empresarial, especialmente o marketing, na constituição desta ocupação profissional. Jeremy Rifkin, Zygmunt Bauman, Paula Sibilia e Denise Sant'Anna permitiram visualizar que o marketing dirigido ao personal trainer tem como tarefa reinventar, ressignificar e "repaginar" esta modalidade de serviço em nome da sobrevivência no disputado mercado da vida ativa.

  10. Information for Librarians and Trainers: MedlinePlus

    Science.gov (United States)

    ... this page: https://medlineplus.gov/training/trainers.html Information for Librarians and Trainers To use the sharing ... Tips Resources for Teaching How to Find Health Information Online General Evaluating Internet Health Information: A Tutorial ...

  11. Trainer module for security control center operations

    International Nuclear Information System (INIS)

    Bernard, E.A.

    1982-01-01

    An operator trainer module has been developed to be used with the security control center equipment to be installed as part of a safeguards physical protection system. The module is designed to provide improved training and testing capabilities for control center operators through the use of simulations for perimeter equipment operations. Operators, through the trainer module, can be challenged with a variety of realistic situations which require responsive action identical to that needed in an actual system. This permits a consistent evaluation and confirmation of operator capabilities prior to assignment as an operator and allows for periodic retesting to verify that adequate performance levels are maintained

  12. Educational CPD: how UK GP trainers develop themselves as teachers.

    Science.gov (United States)

    Waters, Mark; Wall, David

    2007-09-01

    There is little in the literature giving the perspective of UK General Practice (GP) trainers on their development as teachers. What motivates GP trainers develop themselves as teachers? What obstacles to their professional development do GP trainers perceive? A questionnaire to all GP trainers in the West Midlands Deanery in 2004. 360/444 (81%) questionnaires were returned. 56.6% of GP trainers had another educational role in addition to training GP Registrars in the practice. 15.8% of trainers possessed an educational qualification. 13 had completed a Certificate in Medical Education and 28 were engaged in study towards that qualification. Trainers wanted more time to spend on their development as teachers than they presently have, and would then be interested in a wider variety of learning methods. However, 56.6% of trainers would still not choose to undertake a university-accredited course. Female GP trainers perceived more difficulty in obtaining protected time for their development as teachers (Educational CPD) (p = 0.021), were significantly less sure of their partners' support for this development (p = 0.033), and were more likely to agree with trainers undertaking a Certificate in Medical Education (p = 0.003). Having an additional educational role did not affect trainers' ability to take protected time, but significantly increased the amount of time aspired to (p = 0.005). Nothing made more difference to trainers' perception of their ability to undertake Educational CPD than did the perceived attitude of their partners. Educational CPD was very important to GP trainers, but getting protected time was difficult. Consideration of the needs and opinions of partners was a very strong barrier to trainers taking sufficient protected time. Given more available time, GP trainers would be more likely to consider gaining academic qualifications in education. However, this was not be something that all trainers wanted.

  13. Blood-Borne Pathogens: Guidelines for Athletic Trainers.

    Science.gov (United States)

    Journal of Athletic Training, 1995

    1995-01-01

    These guidelines cover athletic trainers and blood-borne pathogens at athletic events, student athletic trainer education, universal precautions and Occupational Safety and Health Administration regulations, medical records and confidentiality, infected athletic trainers, human immunodeficiency virus (HIV) and Hepatitis B Virus (HBV) testing, HBV…

  14. Tic Tac Toe Math. Train the Trainer.

    Science.gov (United States)

    Center for Alternative Learning, Bryn Mawr, PA.

    This report describes a project that developed a "Train the Trainer" program that would enable individuals to learn and teach the alternative instructional technique, Tic Tac Toe Math, developed by Richard Cooper for adult basic education students. The pilot workshop conducted as part of the project identified problems that traditional…

  15. The Athletic Trainer: Necessity or Luxury?

    Science.gov (United States)

    Weldon, Gail

    This article emphasizes the importance of including an athletic trainer who is a qualified sports medicine professional in organized school sport programs, particularly football. Educational requirements for persons who wish to go into this profession are outlined, as well as employment opportunities. (JD)

  16. A survey on the high reliability software verification and validation technology for instrumentation and control in NPP

    International Nuclear Information System (INIS)

    Kwon, Kee Choon; Lee, Chang Soo; Dong, In Sook

    1994-01-01

    This document presents the technical status of the software verification and validation (V and V) efforts to support developing and licensing digital instrumentation and control (I and C) systems in nuclear power plants. We have reviewed codes and standards to be concensus criteria among vendor, licensee and licenser. Then we have described the software licensing procedures under 10 CFR 50 and 10 CFR 52 of the United States cope with the licensing barrier. At last, we have surveyed the technical issues related to developing and licensing the high integrity software for digital I and C systems. These technical issues let us know the development direction of our own software V and V methodology. (Author) 13 refs., 2 figs.,

  17. Study on Earthquake Emergency Evacuation Drill Trainer Development

    Science.gov (United States)

    ChangJiang, L.

    2016-12-01

    With the improvement of China's urbanization, to ensure people survive the earthquake needs scientific routine emergency evacuation drills. Drawing on cellular automaton, shortest path algorithm and collision avoidance, we designed a model of earthquake emergency evacuation drill for school scenes. Based on this model, we made simulation software for earthquake emergency evacuation drill. The software is able to perform the simulation of earthquake emergency evacuation drill by building spatial structural model and selecting the information of people's location grounds on actual conditions of constructions. Based on the data of simulation, we can operate drilling in the same building. RFID technology could be used here for drill data collection which read personal information and send it to the evacuation simulation software via WIFI. Then the simulation software would contrast simulative data with the information of actual evacuation process, such as evacuation time, evacuation path, congestion nodes and so on. In the end, it would provide a contrastive analysis report to report assessment result and optimum proposal. We hope the earthquake emergency evacuation drill software and trainer can provide overall process disposal concept for earthquake emergency evacuation drill in assembly occupancies. The trainer can make the earthquake emergency evacuation more orderly, efficient, reasonable and scientific to fulfill the increase in coping capacity of urban hazard.

  18. Training aids: the motor operator valve trainer

    International Nuclear Information System (INIS)

    McCulloch, B.

    1987-01-01

    The spectrum of training aids used in the nuclear industry runs the gamut from the very basic (i.e., valve training aids - gate, globe, check) to the highly complex (i.e., nuclear full scope simulator). Designing and purchasing the best training aids take much time, detailed investigation, and good understanding of plant operations. The training aid that has given the New York Power Authority the best results has been the motor operator valve (MOV) trainer. Some of the items that make the MOV trainer a good choice are: (1) large number of MOVs in the plant, (2) importance of MOVs to safe plant operation, (3) detailed MOV procedures used by the plant, (4) history of MOV problems, and (5) ability to demonstrate important concepts and operation - hammer blow effect, torque and limit switch adjustment and functions, and actual sequence of operation of the limitorque valve operator

  19. Personal trainer demographics, current practice trends and common trainee injuries

    Directory of Open Access Journals (Sweden)

    Gregory R. Waryasz

    2016-10-01

    Full Text Available Increasing emphasis on maintaining a healthy lifestyle has led many individuals to seek advice on exercise from personal trainers. There are few studies to date that evaluate personal trainer education, practice trends, and injuries they have seen while training clients. A survey was distributed to personal trainers using Survey Monkey® (Palo Alto, CA, USA with 605 personal trainers accessing the survey. An exercise related bachelor’s degree was held by 64.2% of survey participants and a certification in personal training by 89.0%. The most common personal trainer certifications were from American College of Sports Medicine (59.2% and National Strength and Conditioning Association (28.9%. Only 2.9% of all personal trainers surveyed had no exercise-related bachelor’s degree and no personal trainer certification. The most common injuries seen by personal trainers during sessions were lumbar muscle strain (10.7%, rotator cuff tear/tendonitis (8.9%, shin splints (8.1%, ankle sprain (7.5%, and cervical muscle strain (7.4%. There is variability in the practices between different personal trainers when analyzing differences in collegiate education, personal trainer certifications, and strength and conditioning certifications. The clinical implication of the differences in practices is unknown as to the impact on injuries or exercise prescription effectiveness.

  20. Personal Trainer Demographics, Current Practice Trends and Common Trainee Injuries.

    Science.gov (United States)

    Waryasz, Gregory R; Daniels, Alan H; Gil, Joseph A; Suric, Vladimir; Eberson, Craig P

    2016-09-19

    Increasing emphasis on maintaining a healthy lifestyle has led many individuals to seek advice on exercise from personal trainers. There are few studies to date that evaluate personal trainer education, practice trends, and injuries they have seen while training clients. A survey was distributed to personal trainers using Survey Monkey® (Palo Alto, CA, USA) with 605 personal trainers accessing the survey. An exercise related bachelor's degree was held by 64.2% of survey participants and a certification in personal training by 89.0%. The most common personal trainer certifications were from American College of Sports Medicine (59.2%) and National Strength and Conditioning Association (28.9%). Only 2.9% of all personal trainers surveyed had no exercise-related bachelor's degree and no personal trainer certification. The most common injuries seen by personal trainers during sessions were lumbar muscle strain (10.7%), rotator cuff tear/tendonitis (8.9%), shin splints (8.1%), ankle sprain (7.5%), and cervical muscle strain (7.4%). There is variability in the practices between different personal trainers when analyzing differences in collegiate education, personal trainer certifications, and strength and conditioning certifications. The clinical implication of the differences in practices is unknown as to the impact on injuries or exercise prescription effectiveness.

  1. Personal Trainer Demographics, Current Practice Trends and Common Trainee Injuries

    Science.gov (United States)

    Waryasz, Gregory R.; Daniels, Alan H.; Gil, Joseph A.; Suric, Vladimir; Eberson, Craig P.

    2016-01-01

    Increasing emphasis on maintaining a healthy lifestyle has led many individuals to seek advice on exercise from personal trainers. There are few studies to date that evaluate personal trainer education, practice trends, and injuries they have seen while training clients. A survey was distributed to personal trainers using Survey Monkey® (Palo Alto, CA, USA) with 605 personal trainers accessing the survey. An exercise related bachelor’s degree was held by 64.2% of survey participants and a certification in personal training by 89.0%. The most common personal trainer certifications were from American College of Sports Medicine (59.2%) and National Strength and Conditioning Association (28.9%). Only 2.9% of all personal trainers surveyed had no exercise-related bachelor’s degree and no personal trainer certification. The most common injuries seen by personal trainers during sessions were lumbar muscle strain (10.7%), rotator cuff tear/tendonitis (8.9%), shin splints (8.1%), ankle sprain (7.5%), and cervical muscle strain (7.4%). There is variability in the practices between different personal trainers when analyzing differences in collegiate education, personal trainer certifications, and strength and conditioning certifications. The clinical implication of the differences in practices is unknown as to the impact on injuries or exercise prescription effectiveness. PMID:27761219

  2. Radiology trainer. Torso, internal organs and vessels

    International Nuclear Information System (INIS)

    Staebler, A.; Ertl-Wagner, B.

    2006-01-01

    This book enables students to simulate examinations. The Radiology Trainer series comprises the whole knowledge of radiology in the form of case studies for self-testing. It is based on the best-sorted German-language collection of radiological examinations of all organ regions. Step by step, radiological knowledge is trained in order to make diagnoses more efficient. The book series ensures optimal preparation for the final medical examinations and is also a valuable tool for practical training. (orig.)

  3. Material integrity verification radar

    International Nuclear Information System (INIS)

    Koppenjan, S.K.

    1999-01-01

    The International Atomic Energy Agency (IAEA) has the need for verification of 'as-built' spent fuel-dry storage containers and other concrete structures. The IAEA has tasked the Special Technologies Laboratory (STL) to fabricate, test, and deploy a stepped-frequency Material Integrity Verification Radar (MIVR) system to nondestructively verify the internal construction of these containers. The MIVR system is based on previously deployed high-frequency, ground penetrating radar (GPR) systems that have been developed by STL for the U.S. Department of Energy (DOE). Whereas GPR technology utilizes microwave radio frequency energy to create subsurface images, MTVR is a variation for which the medium is concrete instead of soil. The purpose is to nondestructively verify the placement of concrete-reinforcing materials, pipes, inner liners, and other attributes of the internal construction. The MIVR system underwent an initial field test on CANDU reactor spent fuel storage canisters at Atomic Energy of Canada Limited (AECL), Chalk River Laboratories, Ontario, Canada, in October 1995. A second field test at the Embalse Nuclear Power Plant in Embalse, Argentina, was completed in May 1996. The DOE GPR also was demonstrated at the site. Data collection and analysis were performed for the Argentine National Board of Nuclear Regulation (ENREN). IAEA and the Brazilian-Argentine Agency for the Control and Accounting of Nuclear Material (ABACC) personnel were present as observers during the test. Reinforcing materials were evident in the color, two-dimensional images produced by the MIVR system. A continuous pattern of reinforcing bars was evident and accurate estimates on the spacing, depth, and size were made. The potential uses for safeguard applications were jointly discussed. The MIVR system, as successfully demonstrated in the two field tests, can be used as a design verification tool for IAEA safeguards. A deployment of MIVR for Design Information Questionnaire (DIQ

  4. Training of Trainers (ToT) Program in Team Teaching

    Science.gov (United States)

    Febrianti, Werry; Wiryanto, Leo Hari

    2018-01-01

    The first year students in Sumatera Institute of Technology (ITERA) follow the first year program (TPB). They will learn about mathematics, physics, chemistry, and all of the basic subjects that they need for learning in ITERA. They will study in the big classrooms with different background department of their friends. This situation makes the lectures become more challenging in teaching their lessons. Besides the classrooms, the experience of the lecturers is still need to be improved because the lecturers are young and less of experience in teaching so that they need guidance from their senior lecturer. Because of that situation, Training of Trainers (ToT) program in team teaching is one of the solution that can increase the young lecturers’s ability so that they can teach well in the massal conditions of the classrooms. ToT program in team teaching indicated the better result than regular teaching.

  5. Development of Laser Rifle Trainer with Full Shot Imitation

    OpenAIRE

    Bansevicius, Ramutis; Fedaravicius, Algimantas; Ostasevicius, Vytautas; Ragulskis, Minvydas

    2004-01-01

    Laser trainers are effective tools for shot and sportsmen training. However, the majority of trainers have neither realistic recoil nor sound imitation systems. The objective of the development of laser rifle trainer with full shot imitation was to investigate and simulate the recoil of combat weapons under single and serial shooting regimes so that the training weapons could simulate complete recoil and sound imitation.Theoretical and experimental investigations lead to the development of sh...

  6. Development of Laser Rifle Trainer with Full Shot Imitation

    Directory of Open Access Journals (Sweden)

    Ramutis Bansevicius

    2004-01-01

    Full Text Available Laser trainers are effective tools for shot and sportsmen training. However, the majority of trainers have neither realistic recoil nor sound imitation systems. The objective of the development of laser rifle trainer with full shot imitation was to investigate and simulate the recoil of combat weapons under single and serial shooting regimes so that the training weapons could simulate complete recoil and sound imitation.

  7. Cell phone based balance trainer

    Science.gov (United States)

    2012-01-01

    Background In their current laboratory-based form, existing vibrotactile sensory augmentation technologies that provide cues of body motion are impractical for home-based rehabilitation use due to their size, weight, complexity, calibration procedures, cost, and fragility. Methods We have designed and developed a cell phone based vibrotactile feedback system for potential use in balance rehabilitation training in clinical and home environments. It comprises an iPhone with an embedded tri-axial linear accelerometer, custom software to estimate body tilt, a "tactor bud" accessory that plugs into the headphone jack to provide vibrotactile cues of body tilt, and a battery. Five young healthy subjects (24 ± 2.8 yrs, 3 females and 2 males) and four subjects with vestibular deficits (42.25 ± 13.5 yrs, 2 females and 2 males) participated in a proof-of-concept study to evaluate the effectiveness of the system. Healthy subjects used the system with eyes closed during Romberg, semi-tandem Romberg, and tandem Romberg stances. Subjects with vestibular deficits used the system with both eyes-open and eyes-closed conditions during semi-tandem Romberg stance. Vibrotactile feedback was provided when the subject exceeded either an anterior-posterior (A/P) or a medial-lateral (M/L) body tilt threshold. Subjects were instructed to move away from the vibration. Results The system was capable of providing real-time vibrotactile cues that informed corrective postural responses. When feedback was available, both healthy subjects and those with vestibular deficits significantly reduced their A/P or M/L RMS sway (depending on the direction of feedback), had significantly smaller elliptical area fits to their sway trajectory, spent a significantly greater mean percentage time within the no feedback zone, and showed a significantly greater A/P or M/L mean power frequency. Conclusion The results suggest that the real-time feedback provided by this system can be used to reduce body sway. Its

  8. Cell phone based balance trainer.

    Science.gov (United States)

    Lee, Beom-Chan; Kim, Jeonghee; Chen, Shu; Sienko, Kathleen H

    2012-02-08

    In their current laboratory-based form, existing vibrotactile sensory augmentation technologies that provide cues of body motion are impractical for home-based rehabilitation use due to their size, weight, complexity, calibration procedures, cost, and fragility. We have designed and developed a cell phone based vibrotactile feedback system for potential use in balance rehabilitation training in clinical and home environments. It comprises an iPhone with an embedded tri-axial linear accelerometer, custom software to estimate body tilt, a "tactor bud" accessory that plugs into the headphone jack to provide vibrotactile cues of body tilt, and a battery. Five young healthy subjects (24 ± 2.8 yrs, 3 females and 2 males) and four subjects with vestibular deficits (42.25 ± 13.5 yrs, 2 females and 2 males) participated in a proof-of-concept study to evaluate the effectiveness of the system. Healthy subjects used the system with eyes closed during Romberg, semi-tandem Romberg, and tandem Romberg stances. Subjects with vestibular deficits used the system with both eyes-open and eyes-closed conditions during semi-tandem Romberg stance. Vibrotactile feedback was provided when the subject exceeded either an anterior-posterior (A/P) or a medial-lateral (M/L) body tilt threshold. Subjects were instructed to move away from the vibration. The system was capable of providing real-time vibrotactile cues that informed corrective postural responses. When feedback was available, both healthy subjects and those with vestibular deficits significantly reduced their A/P or M/L RMS sway (depending on the direction of feedback), had significantly smaller elliptical area fits to their sway trajectory, spent a significantly greater mean percentage time within the no feedback zone, and showed a significantly greater A/P or M/L mean power frequency. The results suggest that the real-time feedback provided by this system can be used to reduce body sway. Its advantages over more complex

  9. Cell phone based balance trainer

    Directory of Open Access Journals (Sweden)

    Lee Beom-Chan

    2012-02-01

    Full Text Available Abstract Background In their current laboratory-based form, existing vibrotactile sensory augmentation technologies that provide cues of body motion are impractical for home-based rehabilitation use due to their size, weight, complexity, calibration procedures, cost, and fragility. Methods We have designed and developed a cell phone based vibrotactile feedback system for potential use in balance rehabilitation training in clinical and home environments. It comprises an iPhone with an embedded tri-axial linear accelerometer, custom software to estimate body tilt, a "tactor bud" accessory that plugs into the headphone jack to provide vibrotactile cues of body tilt, and a battery. Five young healthy subjects (24 ± 2.8 yrs, 3 females and 2 males and four subjects with vestibular deficits (42.25 ± 13.5 yrs, 2 females and 2 males participated in a proof-of-concept study to evaluate the effectiveness of the system. Healthy subjects used the system with eyes closed during Romberg, semi-tandem Romberg, and tandem Romberg stances. Subjects with vestibular deficits used the system with both eyes-open and eyes-closed conditions during semi-tandem Romberg stance. Vibrotactile feedback was provided when the subject exceeded either an anterior-posterior (A/P or a medial-lateral (M/L body tilt threshold. Subjects were instructed to move away from the vibration. Results The system was capable of providing real-time vibrotactile cues that informed corrective postural responses. When feedback was available, both healthy subjects and those with vestibular deficits significantly reduced their A/P or M/L RMS sway (depending on the direction of feedback, had significantly smaller elliptical area fits to their sway trajectory, spent a significantly greater mean percentage time within the no feedback zone, and showed a significantly greater A/P or M/L mean power frequency. Conclusion The results suggest that the real-time feedback provided by this system can be used

  10. The MR trainer. Upper extremities. 2. rev. and enl. ed.; Der MR-Trainer. Obere Extremitaet

    Energy Technology Data Exchange (ETDEWEB)

    Breitenseher, Martin [Landesklinikum Waldviertel Horn (Austria). Inst. fuer Radiologie und Interventionelle Radiologie

    2016-05-01

    The MR (magnetic resonance) trainer covers the indications in NMR images of hands, elbows and shoulder, including fractures and instabilities at the wrist, tendon and ligament lesions, carpal tunnel syndrome, ulnar tunnel syndrome, scaphoid bone fracture, (posttraumatic) osteonecrosis, synovial lesions, luxations, osteocondrosis, soft tissue rumors and bone tumors. The book includes training tasks for each issue.

  11. Radiology trainer. Surgical ambulance. 2. rev. and enl. ed.; Roentgen-Trainer. Chirurgische Ambulanz

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, Ole [Wedau-Kliniken Duisburg (Germany). Klinik fuer Unfallchirurgie; Ruchholtz, Steffen [Universitaetsklinikum Giessen und Marburg GmbH, Marburg (Germany). Klinik fuer Unfall-, Hand- und Wiederherstellungschirurgie; Siemann, Holger [LVR Klinikum Essen (Germany); Barkhausen, Joerg [Universitaetsklinikum Schleswig-Holstein, Luebeck (Germany). Klinik fuer Radiologie und Nuklearmedizin

    2013-08-01

    The radiology trainer for surgical ambulance includes informative X-ray imaging examples for the following issues: zygoma, nasal bone, spinal cord, clavicle, shoulder, upper arms, elbow, forearms, wrist, hand, phalanx, thorax, sternum, pelvis, abdomen, hips, femur, knee, lower leg, ankle, feet.

  12. Swarm Verification

    Science.gov (United States)

    Holzmann, Gerard J.; Joshi, Rajeev; Groce, Alex

    2008-01-01

    Reportedly, supercomputer designer Seymour Cray once said that he would sooner use two strong oxen to plow a field than a thousand chickens. Although this is undoubtedly wise when it comes to plowing a field, it is not so clear for other types of tasks. Model checking problems are of the proverbial "search the needle in a haystack" type. Such problems can often be parallelized easily. Alas, none of the usual divide and conquer methods can be used to parallelize the working of a model checker. Given that it has become easier than ever to gain access to large numbers of computers to perform even routine tasks it is becoming more and more attractive to find alternate ways to use these resources to speed up model checking tasks. This paper describes one such method, called swarm verification.

  13. Training the Trainers - from an EU Perspective

    DEFF Research Database (Denmark)

    Martinsen, Bodil

    of Language and Business Communication at the Aarhus School of Business.The other project participants are from Belgium, Great Britain, Italy, the Netherlands and Spain. The project, whose overall objective is to create the means to obtain competent trainers, is a follow-up to three previous projects (Grotius......, and transmitted via the Internet (live-streaming) in order to give access to as large an audience as possible. The material produced during the project and resulting from the seminar will be made available on the project website. The project thereby produces easily accessible results and thus facilitates...

  14. First trainer six practice tests with answers

    CERN Document Server

    May, Peter

    2014-01-01

    Six full practice tests with tips and training for the 2015 revised Cambridge English: First (FCE). First Trainer Second edition offers six practice tests for the revised Cambridge English: First (FCE) exam combined with easy-to-follow guidance and exam tips. The first two tests are fully guided with advice on how to tackle each paper. Extra practice activities, informed by the Cambridge Learner Corpus, a bank of real candidates' exam papers, focus on areas where students typically need the most help. This version contains a full answer key. Audio for the listening and speaking test activities is available online for download. Audio CDs featuring the listening material are also available, separately.

  15. WordPress 24-hour trainer

    CERN Document Server

    Plumley, George

    2015-01-01

    Create and expand feature-rich sites with no programming experience Ready to build, maintain, and expand your web site with WordPress but have no prior programming experience? WordPress 24-Hour Trainer, 3rd Edition is your book-and-video learning solution that walks you step-by-step through all the important features you will need to know. Lessons range from focused, practical everyday tasks to more advanced, creative features. Learn from an industry professional how to enter content, create pages, manage menus, utilize plug-ins, connect to social media, create membership and e-commerce site

  16. The development of verification and validation technology for instrumentation and control in NPPs - A study on the software development methodology of a highly reliable software

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Yong Rae; Cha, Sung Deok; Lee, Woo Jin; Chae, Hong Seok; Yoon, Kwang Sik; Jeong, Ki Suk [Korea Advanced Institute of Science and Technology,= Taejon (Korea, Republic of)

    1996-07-01

    Nuclear industries have tried to use the digital I and C technology in developing advanced nuclear power plants. However, because the industries did= not establish the highly reliable software development methodologies and standards applied to developing the highly reliable and safe software for digital I and C systems, they were confronted with the difficulties to avoid software common mode failures. To mitigate the difficulties, the highly reliable software development environments and methodologies and validation and verification techniques should be the cornerstone of all digital implementation in nuclear power plants. The objectives of this project is to establish the highly reliable software development methodology to support developing digital instrumentation and control systems in nuclear power plants. In this project, we have investigated the business-oriented and the real-time software development methods and techniques for ensuring safety and reliability of the software. Also we have studied standards related to licensing the software for digital I and C systems. 50 refs., 51 figs. (author)

  17. The essence of training trainers in the context of distance education

    OpenAIRE

    Yudy Alexandra Molina-Hurtado; Claudia Patricia Moreno-Cely

    2016-01-01

    The training of trainers in the context of distance education becomes a challenge for teacher’s degree program in Basic Education with emphasis in Mathematics, Humanities and Spanish language, inviting them to structure learning environments conducive to strengthening the apprehension of powers conceptual, educational, technological, and social work to ensure the mobilization of knowledge in concrete situations and different scenarios. The objective of the article focuses on the importance...

  18. Anhydrous Ammonia Training Module. Trainer's Package. Participant's Package.

    Science.gov (United States)

    Beaudin, Bart; And Others

    This document contains a trainer's and a participant's package for teaching employees on site safe handling procedures for working with anhydrous ammonia, especially on farms. The trainer's package includes the following: a description of the module; a competency; objectives; suggested instructional aids; a training outline (or lesson plan) for…

  19. An investigation into the competence of workplace trainers to meet ...

    African Journals Online (AJOL)

    This article focussses on the competence of trainers in the South African workplace to provide training to underprepaired learners whose special learning need should be understood by the trainers. The National Qualifications Framework, brought into being by the South African Qualifications ity Act of 1995, has as one of its ...

  20. Importance of Health Science Education for Personal Fitness Trainers.

    Science.gov (United States)

    Malek, Moh H.; Nalbone, David P.; Berger, Dale E.; Coburn, Jared W.

    2002-01-01

    Examined the relationship between commonly used indicators of knowledge and actual knowledge in five areas among fitness trainers. Data from the Fitness Instructors Knowledge Assessment indicated that a bachelor's degree in the field of exercise science and possession of one of two specific certifications strongly predicted a trainer's knowledge,…

  1. Teacher education and occupational trainers figure

    Directory of Open Access Journals (Sweden)

    Ana Isabel HOLGUERAS GONZÁLEZ

    2011-09-01

    Full Text Available We want to know if Cordoba occupational trainers to date and what type of training method they prefer. we also wonder if there is information and/or training sufficient training activities in e-learning by the Administration and if they consider that this formation has the same status as the classroom training. This study goes through three stages, exploratory, descriptive and explanatory, within a continuum, depending on the research phase where we are, and therefore, does not indicate clearly any of them, although it is mainly descriptive. It uses a nonrandom sample since it requires a controlled choice of subjects with specific characteristics in particular we refer to is called the sample of experts. The population we apply the questionnaires is the group of active occupational trainers, students who are conducting the course of Shaper Occupational and training managers. Data collected shows that the e-learning is not fully integrated into our society, because of the lack of information, lack of supply and, also, because of «fear of the unknown», so maybe we won’t consider it as a training option, further reinforced by the need for pre-literacy. There is not trust in e-learning, because at the beginning there was a concern over the technical aspects, ignoring the methodological and pedagogical, and now, the situation is improving, although it will need time to adapt.

  2. Data Exchanges and Verifications Online (DEVO)

    Data.gov (United States)

    Social Security Administration — DEVO is the back-end application for processing SSN verifications and data exchanges. DEVO uses modern technology for parameter driven processing of both batch and...

  3. A Sleep Position Trainer for positional sleep apnea

    DEFF Research Database (Denmark)

    Laub, Rasmus R; Tønnesen, Philip; Jennum, Poul J

    2017-01-01

    We tested the effect of the Sleep Position Trainer, a vibrational device, for positional sleep apnea in an open, randomized controlled trial with 101 patients, where 52 patients were allocated to Sleep Position Trainer and 49 patients to a non-treatment control group for 2 months (Part 1). All...... patients were then followed as a cohort for a period of 6 months with use of the Sleep Position Trainer (Part 2). The participants were assessed with polygraphy at entry, and after 2 and 6 months. The mean apnea-hypopnea index supine was 35 per h (SD, 18) in the Sleep Position Trainer group and 38 per h...... (SD, 15) in the control group at entry. In a per protocol analysis, the mean total apnea-hypopnea index at entry and after 2 months in the Sleep Position Trainer group was 18 per h (SD, 10) and 10 per h (SD, 9; P

  4. IMRT plan verification in radiotherapy

    International Nuclear Information System (INIS)

    Vlk, P.

    2006-01-01

    This article describes the procedure for verification of IMRT (Intensity modulated radiation therapy) plan, which is used in the Oncological Institute of St. Elisabeth in Bratislava. It contains basic description of IMRT technology and developing a deployment plan for IMRT planning system CORVUS 6.0, the device Mimic (Multilammelar intensity modulated collimator) and the overall process of verifying the schedule created. The aim of verification is particularly good control of the functions of MIMIC and evaluate the overall reliability of IMRT planning. (author)

  5. Future directions of nuclear verification

    International Nuclear Information System (INIS)

    Blix, H.

    1997-01-01

    Future directions of nuclear verification are discussed including the following topics: verification of non-proliferation commitments; practicalities of strengthening safeguards; new tasks in nuclear verification

  6. Lessons from a Train-the-Trainer Professional Development Program: The Sustainable Trainer Engagement Program (STEP)

    Science.gov (United States)

    Shupla, Christine; Gladney, Alicia; Dalton, Heather; LaConte, Keliann; Truxillo, Jeannette; Shipp, Stephanie

    2015-11-01

    The Sustainable Trainer Engagement Program (STEP) is a modified train-the-trainer professional development program being conducted by the Lunar and Planetary Institute (LPI). STEP has provided two cohorts of 6-8th grade science specialists and lead teachers in the Houston region with in-depth Earth and Space Science (ESS) content, activities, and pedagogy over 15 days each, aligned with Texas science standards. This project has two over-arching goals: to improve middle school ESS instruction, and to create and test an innovative model for Train-the-Trainer.This poster will share details regarding STEP’s activities and resources, program achievements, and its main findings to date. STEP is being evaluated by external evaluators at the Research Institute of Texas, part of the Harris County Department of Education. External evaluation shows an increase after one year in STEP participants’ knowledge (cohort 1 showed a 10% increase; cohort 2 showed a 20% increase), confidence in teaching Earth and Space Science effectively (cohort 1 demonstrated a 10% increase; cohort 2 showed a 20% increase), and confidence in preparing other teachers (cohort 1 demonstrated a 12% increase; cohort 2 showed a 20% increase). By September 2015, STEP participants led (or assisted in leading) approximately 40 workshops for about 1800 science teachers in Texas. Surveys of teachers attending professional development conducted by STEP participants show very positive responses, with averages for conference workshop evaluations ranging from 3.6 on a 4 point scale, and other evaluations averaging from 4.1 to 5.0 on a 5 point scale.Main lessons for the team on the train-the-trainer model include: a lack of confidence by leaders in K-12 science education in presenting ESS professional development, difficulties in arranging for school or district content-specific professional development, the minimal duration of most school and district professional development sessions, and uncertainties in

  7. Accuracy of Athletic Trainer and Physician Diagnoses in Sports Medicine.

    Science.gov (United States)

    Lombardi, Nicholas J; Tucker, Bradford; Freedman, Kevin B; Austin, Luke S; Eck, Brandon; Pepe, Matthew; Tjoumakaris, Fotios P

    2016-09-01

    It is standard practice in high school athletic programs for certified athletic trainers to evaluate and treat injured student athletes. In some cases, a trainer refers an athlete to a physician for definitive medical management. This study was conducted to determine the rate of agreement between athletic trainers and physicians regarding assessment of injuries in student athletes. All high school athletes who were injured between 2010 and 2012 at 5 regional high schools were included in a research database. All patients who were referred for physician evaluation and treatment were identified and included in this analysis. A total of 286 incidents met the inclusion criteria. A total of 263 (92%) of the athletic trainer assessments and physician diagnoses were in agreement. In the 23 cases of disagreement, fractures and sprains were the most common injuries. Kappa analysis showed the highest interrater agreement in injuries classified as dislocations and concussions and the lowest interrater agreement in meniscal/labral injuries and fractures. In the absence of a confirmed diagnosis, agreement among health care providers can be used to infer accuracy. According to this principle, as agreement between athletic trainers and physicians improves, there is a greater likelihood of arriving at the correct assessment and treatment plan. Athletic trainers are highly skilled professionals who are well trained in the evaluation of athletic injuries. The current study showed that additional training in identifying fractures may be beneficial to athletic trainers and the athletes they treat. [Orthopedics. 2016; 39(5):e944-e949.]. Copyright 2016, SLACK Incorporated.

  8. Athletic Trainers' Attitudes Toward Drug Screening of Intercollegiate Athletes

    Science.gov (United States)

    Starkey, Chad; Abdenour, Thomas E.; Finnane, David

    1994-01-01

    Since the inception of NCAA-mandated drug screening in 1986, college athletic trainers have found themselves involved at various levels in institutional drug-screening programs. Several legal, moral, and ethical questions have been raised regarding the drug screening of college athletes, and studies have been conducted to rate athletes' attitudes toward this practice. We examined the responses of certified athletic trainers employed in college settings to ascertain their attitudes toward the drug screening of athletes in general, and, specifically, how they view their role in this process. Surveys were distributed to 500 college athletic trainers randomly selected from the membership database maintained by the National Athletic Trainers' Association, Inc (Dallas, TX). The results of this survey indicate that the majority of athletic trainers feel that their association with the drug-screening process places them in the dual role of police and counselor, but that this relationship does not negatively affect their rapport with their athletes. Opinions regarding the drug-screening process and the importance of education in deterring drug use are somewhat dependent upon the athletic trainer's involvement in the drug-screening process. Athletic trainers possess a stronger desire to serve as resource persons who organize substance abuse education programs rather than serving as administrators of the sampling process. PMID:16558274

  9. Independent verification survey report for exposure units Z2-24, Z2-31, Z2-32, AND Z2-36 in zone 2 of the East Tennessee technology park Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    King, David A. [Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States)

    2013-10-01

    The U.S. Department of Energy (DOE) Oak Ridge Office of Environmental Management selected Oak Ridge Associated Universities (ORAU), through the Oak Ridge Institute for Science and Education (ORISE) contract, to perform independent verification (IV) at Zone 2 of the East Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee. ORAU has concluded IV surveys, per the project-specific plan (PSP) (ORAU 2013a) covering exposure units (EUs) Z2-24, -31, -32, and -36. The objective of this effort was to verify the target EUs comply with requirements in the Zone 2 Record of Decision (ROD) (DOE 2005), as implemented by using the dynamic verification strategy presented in the dynamic work plan (DWP) (BJC 2007); and confirm commitments in the DWP were adequately implemented, as verified via IV surveys and soil sampling.

  10. Software verification for nuclear industry

    International Nuclear Information System (INIS)

    Wilburn, N.P.

    1985-08-01

    Why verification of software products throughout the software life cycle is necessary is considered. Concepts of verification, software verification planning, and some verification methodologies for products generated throughout the software life cycle are then discussed

  11. Verification of ceramic structures

    NARCIS (Netherlands)

    Behar-Lafenetre, S.; Cornillon, L.; Rancurel, M.; Graaf, D. de; Hartmann, P.; Coe, G.; Laine, B.

    2012-01-01

    In the framework of the "Mechanical Design and Verification Methodologies for Ceramic Structures" contract [1] awarded by ESA, Thales Alenia Space has investigated literature and practices in affiliated industries to propose a methodological guideline for verification of ceramic spacecraft and

  12. Verification and disarmament

    International Nuclear Information System (INIS)

    Blix, H.

    1998-01-01

    The main features are described of the IAEA safeguards verification system that non-nuclear weapon states parties of the NPT are obliged to accept. Verification activities/problems in Iraq and North Korea are discussed

  13. Verification and disarmament

    Energy Technology Data Exchange (ETDEWEB)

    Blix, H. [IAEA, Vienna (Austria)

    1998-07-01

    The main features are described of the IAEA safeguards verification system that non-nuclear weapon states parties of the NPT are obliged to accept. Verification activities/problems in Iraq and North Korea are discussed.

  14. DIESEL ENGINE RETROFIT TECHNOLOGY VERIFICATION

    Science.gov (United States)

    This presentation wil be given at the EPA Science Forum 2005 in Washington, DC. According to recent estimates, there are approximately 7.9 million heavy-duty diesel trucks and buses in use in the United States. Emissions from these vehicles account for substantial portions of t...

  15. Development of an Elliptical Trainer Physical Fitness Test

    Science.gov (United States)

    2006-04-02

    rear-drive model elliptical trainer for placement in Navy gyms and ships. Despite the availability of the CT 9500 HR elliptical trainer for Navy...waiver for participation in the PRT, and were not on any chronic medications ( steroid inhalants or steroids , anti-inflammatory drugs). One individual was...Naval Region Southwest) to recruit from the general Navy population; (2) posting flyers in area gyms to recruit sailors who have experience using

  16. Athletic Trainers' Attitudes Toward Drug Screening of Intercollegiate Athletes

    OpenAIRE

    Starkey, Chad; Abdenour, Thomas E.; Finnane, David

    1994-01-01

    Since the inception of NCAA-mandated drug screening in 1986, college athletic trainers have found themselves involved at various levels in institutional drug-screening programs. Several legal, moral, and ethical questions have been raised regarding the drug screening of college athletes, and studies have been conducted to rate athletes' attitudes toward this practice. We examined the responses of certified athletic trainers employed in college settings to ascertain their attitudes toward the ...

  17. An Onboard ISS Virtual Reality Trainer

    Science.gov (United States)

    Miralles, Evelyn

    2013-01-01

    Prior to the retirement of the Space Shuttle, many exterior repairs on the International Space Station (ISS) were carried out by shuttle astronauts, trained on the ground and flown to the Station to perform these specific repairs. With the retirement of the shuttle, this is no longer an available option. As such, the need for ISS crew members to review scenarios while on flight, either for tasks they already trained for on the ground or for contingency operations has become a very critical issue. NASA astronauts prepare for Extra-Vehicular Activities (EVA) or Spacewalks through numerous training media, such as: self-study, part task training, underwater training in the Neutral Buoyancy Laboratory (NBL), hands-on hardware reviews and training at the Virtual Reality Laboratory (VRLab). In many situations, the time between the last session of a training and an EVA task might be 6 to 8 months. EVA tasks are critical for a mission and as time passes the crew members may lose proficiency on previously trained tasks and their options to refresh or learn a new skill while on flight are limited to reading training materials and watching videos. In addition, there is an increased need for unplanned contingency repairs to fix problems arising as the Station ages. In order to help the ISS crew members maintain EVA proficiency or train for contingency repairs during their mission, the Johnson Space Center's VRLab designed an immersive ISS Virtual Reality Trainer (VRT). The VRT incorporates a unique optical system that makes use of the already successful Dynamic On-board Ubiquitous Graphics (DOUG) software to assist crew members with procedure reviews and contingency EVAs while on board the Station. The need to train and re-train crew members for EVAs and contingency scenarios is crucial and extremely demanding. ISS crew members are now asked to perform EVA tasks for which they have not been trained and potentially have never seen before. The Virtual Reality Trainer (VRT

  18. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, REMOVAL OF ARSENIC IN DRINKING WATER: PHASE 1-ADI PILOT TEST UNIT NO. 2002-09 WITH MEDIA G2®

    Science.gov (United States)

    Integrity verification testing of the ADI International Inc. Pilot Test Unit No. 2002-09 with MEDIA G2® arsenic adsorption media filter system was conducted at the Hilltown Township Water and Sewer Authority (HTWSA) Well Station No. 1 in Sellersville, Pennsylvania from October 8...

  19. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, REMOVAL OF ARSENIC IN DRINKING WATER: ADI INTERNATIONAL INC. ADI PILOT TEST UNIT NO. 2002-09 WITH MEDIA G2®; PHASE II

    Science.gov (United States)

    Verification testing of the ADI International Inc. Unit No. 2002-09 with MEDIA G2® arsenic adsorption media filter system was conducted at the Hilltown Township Water and Sewer Authority (HTWSA) Well Station No. 1 in Sellersville, Pennsylvania from October 8, 2003 through May 28,...

  20. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, REMOVAL OF ARSENIC IN DRINKING WATER: WATTS PREMIER M-SERIES M-15,000 REVERSE OSMOSIS TREATMENT SYSTEM

    Science.gov (United States)

    Verification testing of the Watts Premier M-Series M-15,000 RO Treatment System was conducted over a 31-day period from April 26, 2004, through May 26, 2004. This test was conducted at the Coachella Valley Water District (CVWD) Well 7802 in Thermal, California. The source water...

  1. Supervising athletic trainers' perceptions of professional socialization of graduate assistant athletic trainers in the collegiate setting.

    Science.gov (United States)

    Thrasher, Ashley B; Walker, Stacy E; Hankemeier, Dorice A; Pitney, William A

    2015-03-01

    Many newly credentialed athletic trainers gain initial employment as graduate assistants (GAs) in the collegiate setting, yet their socialization into their role is unknown. Exploring the socialization process of GAs in the collegiate setting could provide insight into how that process occurs. To explore the professional socialization of GAs in the collegiate setting to determine how GAs are socialized and developed as athletic trainers. Qualitative study. Individual phone interviews. Athletic trainers (N = 21) who had supervised GAs in the collegiate setting for a minimum of 8 years (16 men [76%], 5 women [24%]; years of supervision experience = 14.6 ± 6.6). Data were collected via phone interviews, which were recorded and transcribed verbatim. Data were analyzed by a 4-person consensus team with a consensual qualitative-research design. The team independently coded the data and compared ideas until a consensus was reached, and a codebook was created. Trustworthiness was established through member checks and multianalyst triangulation. Four themes emerged: (1) role orientation, (2) professional development and support, (3) role expectations, and (4) success. Role orientation occurred both formally (eg, review of policies and procedures) and informally (eg, immediate role immersion). Professional development and support consisted of the supervisor mentoring and intervening when appropriate. Role expectations included decision-making ability, independent practice, and professionalism; however, supervisors often expected GAs to function as experienced, full-time staff. Success of the GAs depended on their adaptability and on the proper selection of GAs by supervisors. Supervisors socialize GAs into the collegiate setting by providing orientation, professional development, mentoring, and intervention when necessary. Supervisors are encouraged to use these socialization tactics to enhance the professional development of GAs in the collegiate setting.

  2. What makes an effective clinical trainer?

    Science.gov (United States)

    Alsultan, Mohammed

    2011-11-01

    This study aims at identifying characteristics and behavioral patterns associated with the ideal tutor in different medical fields. This study is expected to answer two questions, first is effective supervision and how can this be determined? And secondly, what skills and qualities do effective supervisors need? An English limited search was performed in many databases including MEDLINE, BEI, and International ERIC for the last 20 years using many search items to identify characteristics cited in the literature as being important for effective clinical teaching. One hundred thirty two articles identified the review excluded literature relating to research supervision. Findings revealed that some of these investigations relied on the tutor's point of view, others on a resident's or a student's opinion or both. Descriptors for effective clinical teachers were categorized into three main classes: (a) teaching skills (i.e. well-prepared, practices evidence-based medicine and believes in its principles and applications, effective, accessible, and provides and accepts both positive and negative feedback), (b) personality (i.e. enthusiastic, respectable, sincere, confident, humanitarian, and compassionate), and (c) attitude (i.e. health advocate, good role-model, encouraging, non-judgmental, aware of learners' growth, well-groomed, and appropriately dressed). Other factors such as the trainer's health (i.e. professional, personal, and spiritual fulfillment) and his/her scholarly activities were also identified.

  3. Verification and the safeguards legacy

    International Nuclear Information System (INIS)

    Perricos, Demetrius

    2001-01-01

    A number of inspection or monitoring systems throughout the world over the last decades have been structured drawing upon the IAEA experience of setting up and operating its safeguards system. The first global verification system was born with the creation of the IAEA safeguards system, about 35 years ago. With the conclusion of the NPT in 1968, inspections were to be performed under safeguards agreements, concluded directly between the IAEA and non-nuclear weapon states parties to the Treaty. The IAEA developed the safeguards system within the limitations reflected in the Blue Book (INFCIRC 153), such as limitations of routine access by the inspectors to 'strategic points', including 'key measurement points', and the focusing of verification on declared nuclear material in declared installations. The system, based as it was on nuclear material accountancy. It was expected to detect a diversion of nuclear material with a high probability and within a given time and therefore determine also that there had been no diversion of nuclear material from peaceful purposes. The most vital element of any verification system is the inspector. Technology can assist but cannot replace the inspector in the field. Their experience, knowledge, intuition and initiative are invaluable factors contributing to the success of any inspection regime. The IAEA inspectors are however not part of an international police force that will intervene to prevent a violation taking place. To be credible they should be technically qualified with substantial experience in industry or in research and development before they are recruited. An extensive training program has to make sure that the inspectors retain their professional capabilities and that it provides them with new skills. Over the years, the inspectors and through them the safeguards verification system gained experience in: organization and management of large teams; examination of records and evaluation of material balances

  4. Comparative survey of environmental health status of schools have health trainer and without health trainer in Bushehr province

    Directory of Open Access Journals (Sweden)

    Bahman Ramavandi

    2015-09-01

    Full Text Available Background: School, as a reliable place in student's education, has an important role in training. If health principles do not comply with in schools, students may be suffering from infectious diseases. Health trainer can be effective in improving school health. This study aimed to determine the effectiveness of health trainer on environmental health level of schools in Bushehr province. Material and Methods This study was a descriptive - analytic study. A total of 20 samples were selected from each of the elementary schools have and not have health trainer using the method of stratified random sampling in the Bushehr province in the year 91-92. Data collected by researcher direct observation and using an assessment form of school environmental health contains 30 questions in 9 different sections. The statistical method used to analyze and test questions in this study were the chi square and Fisher exact test. Results: Based on findings of this research, between the environment health situation in schools with and without health trainer in 19 cases of health variables the significant difference was observed. The statistical analysis showed significant differences between health status of toilets (p<0.005, drinking water taps and buffet (p<0.001, yard and corridors (p<0.01, and solid waste disposal (p<0.025 in schools with and without health trainer in the year 91-92. Conclusion: Overall, the results indicate that the presence of health trainers in schools can lead to improved health status of the school. The schools without health trainer had very poor health status this issue required further try of concerned authorities to employee health trainers in schools.

  5. The MR trainer. Lower limbs; Der MR-Trainer. Untere Extremitaet

    Energy Technology Data Exchange (ETDEWEB)

    Breitenseher, M. [Allgemeines Krankenhaus, Vienna (Austria)

    2003-07-01

    The book is intended as a guide to MRI of the lower limbs for newcomers from other fields, such as radiology, orthopaedics, sports medicine, rheumatology, and (trauma) surgery. The MR trainer imparts the practical knowledge and insights of a specialist, taking the MRI morphology as a starting point. Special features of the didactic concept: the split-page concept, displaying pictures and schematic illustrations on the right page, and explanatory text on the left page. (orig./CB) [German] Dieses Buch wendet sich an alle Einsteiger in der MRT der unteren Extremitaet aus Radiologie, Orthopaedie, Sportmedizin, Rheumatologie und (Unfall-)Chirurgie. Der MR-Trainer vermittelt das praxisbezogene Anwenderwissen ausgehend von der MRT-Morphologie. Besonderheiten des didaktischen Konzepts: Doppelseitenkonzept, rechts Schemata und Abbildungen, links erklaerender Text; MR-Morphologie als Ausgangsbasis, (nachgeschaltet Indikation, Diagnose/DD,Technik); mit Uebungsfaellen zur Ueberpruefung des Gelernten. Wenn Sie dieses Buch durchgearbeitet haben, haben Sie verstanden - warum bestimmte Untersuchungen so gemacht werden, - wann welche Protokolle gefahren werden, - was Sie tatsaechlich sehen, - was noch normal oder schon pathologisch ist, - welcher klinische Bezug dahinter steht und - wie Sie reagieren muessen. (orig./AJ)

  6. Test/QA Plan for Verification of Cavity Ringdown Spectroscopy Systems for Ammonia Monitoring in Stack Gas

    Science.gov (United States)

    The purpose of the cavity ringdown spectroscopy (CRDS) technology test and quality assurance plan is to specify procedures for a verification test applicable to commercial cavity ringdown spectroscopy technologies. The purpose of the verification test is to evaluate the performa...

  7. GENERIC VERIFICATION PROTOCOL: DISTRIBUTED GENERATION AND COMBINED HEAT AND POWER FIELD TESTING PROTOCOL

    Science.gov (United States)

    This report is a generic verification protocol by which EPA’s Environmental Technology Verification program tests newly developed equipment for distributed generation of electric power, usually micro-turbine generators and internal combustion engine generators. The protocol will ...

  8. Sources of practice knowledge among Australian fitness trainers.

    Science.gov (United States)

    Bennie, Jason A; Wiesner, Glen H; van Uffelen, Jannique G Z; Harvey, Jack T; Biddle, Stuart J H

    2017-12-01

    Few studies have examined the sources of practice knowledge fitness trainers use to inform their training methods and update knowledge. This study aims to describe sources of practice knowledge among Australian fitness trainers. In July 2014, 9100 Australian fitness trainers were invited to complete an online survey. Respondents reported the frequency of use of eight sources of practice knowledge (e.g. fitness magazines, academic texts). In a separate survey, exercise science experts (n = 27) ranked each source as either (1) 'high-quality' or (2) 'low-quality'. Proportions of users of 'high-quality' sources were calculated across demographic (age, sex) and fitness industry-related characteristics (qualification, setting, role). A multivariate logistic regression analysis assessed the odds of being classified as a user of high-quality sources, adjusting for demographic and fitness industry-related factors. Out of 1185 fitness trainers (response rate = 13.0%), aged 17-72 years, 47.6% (95% CI, 44.7-50.4%) were classified as frequent users of high-quality sources of practice knowledge. In the adjusted analysis, compared to trainers aged 17-26 years, those aged ≥61 years (OR, 2.15; 95% CI, 1.05-4.38) and 40-50 years (OR, 1.54; 95% CI, 1.02-2.31) were more likely to be classified as a user of high-quality sources. When compared to trainers working in large centres, those working in outdoor settings (OR, 1.81; 95% CI, 1.23-2.65) and medium centres (OR, 1.59; 95% CI, 1.12-2.29) were more likely to be classified as users of high-quality sources. Our findings suggest that efforts should be made to improve the quality of knowledge acquisition among Australian fitness trainers.

  9. Fiscal 1997 report of the development of high efficiency waste power generation technology. No.2 volume. Pilot plant verification test; Kokoritsu haikibutsu hatsuden gijutsu kaihatsu (pilot plant jissho shiken). 1997 nendo hokokusho (daini bunsatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to a high efficiency waste power generation system using general waste as fuel, the details of the following were described: design/construction management and operational study of pilot plant, design/manufacture/construction of pilot plant, and study of an optimal total system. Concerning the construction management and operational study, the paper described the application for governmental/official inspection procedures and taking inspection, process management of pilot plant, site patrol, safety management, management of trial run of pilot plant, drawing-up of a verification test plan and test run, etc. Relating to the design/manufacture/construction of pilot plant, an outline of the pilot plant was described. The paper also stated points to be considered in design of furnace structure and boiler structure, points to be considered of the verification test, etc. As to the study of an optimal total system, the following were described: survey of waste gasification/slagging power generation technology, basic study on RDF production process, survey of trends of waste power generation technology in the U.S., etc. 52 refs., 149 figs., 121 tabs.

  10. Aviation Trainer Technology Test Plan. Volume II. Software Development

    Science.gov (United States)

    1991-11-25

    ethernetTable mov di, [di] ;pointer to structure cmp (di].active, dl ;is it active? jz short @cna cont3 ;exit mov al, [di].count ;get counter cmp al...tailPointer, dx may (di) .headPointer, dx cmp cx, 1 ]z short @cna- cont3 push di mov di, [si+2J ;pointer to ethernetTableImay di, [di] ;pointer to structure...restructure ethernetlndex dec cx jz short @cna- cont3 imp short @cna-cantO @ncot: may (bx), al ;save packet count may (bx+l), dl ;zero out wait counter

  11. Physics Verification Overview

    Energy Technology Data Exchange (ETDEWEB)

    Doebling, Scott William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-09-12

    The purpose of the verification project is to establish, through rigorous convergence analysis, that each ASC computational physics code correctly implements a set of physics models and algorithms (code verification); Evaluate and analyze the uncertainties of code outputs associated with the choice of temporal and spatial discretization (solution or calculation verification); and Develop and maintain the capability to expand and update these analyses on demand. This presentation describes project milestones.

  12. Software verification and testing

    Science.gov (United States)

    1985-01-01

    General procedures for software verification and validation are provided as a guide for managers, programmers, and analysts involved in software development. The verification and validation procedures described are based primarily on testing techniques. Testing refers to the execution of all or part of a software system for the purpose of detecting errors. Planning, execution, and analysis of tests are outlined in this document. Code reading and static analysis techniques for software verification are also described.

  13. A 3-Dimensional Printed Ultrasound Probe Visuospatial Trainer.

    Science.gov (United States)

    McKenna, Ryan T; Dove, Jesse C; Ratzlaff, Robert A; Diaz-Gomez, Jose L; Cox, Daniel J; Simon, Leslie V

    2017-09-04

    Training adult learners to use ultrasound in clinical practice relies on the ability of the learner to apply visuospatial concepts to the anatomy of the human body. We describe a visuospatial trainer that replicates the housing of an ultrasound transducer, through which a linear laser projects light in the same plane and orientation as the ultrasonic sound waves. We use this trainer in combination with a porcine heart dissection laboratory to teach bedside cardiac ultrasound and transthoracic echocardiography (TTE). Off-the-shelf components, including an on/off switch, a laser, and 2 ampere batteries are connected in series and placed inside the 3-dimensional (3D)-printed housing. The trainer's laser emission projects a red line that visually represents the ultrasound's field. Learners project the laser against a porcine or human heart in the orientation of the TTE window they wish to obtain and then dissect the heart in that plane, allowing for visualization of how grayscale images are obtained from 3D structures. Previous research has demonstrated that visuospatial aptitude is correlated with ultrasound procedural performance. We present this trainer and educational method as a specific training intervention that could enhance the visuospatial ability of the ultrasound learner. This visuospatial trainer and educational method present a novel process for enhancing learner understanding of 2-dimensional ultrasound images as they relate to 3D structures. Having a clear understanding of how images are generated in cross section may translate into more proficient adaptation of cardiac ultrasound and TTE.

  14. Evaluation of a novel high-fidelity epistaxis task trainer.

    Science.gov (United States)

    Scott, Grace M; Roth, Kathryn; Rotenberg, Brian; Sommer, Doron D; Sowerby, Leigh; Fung, Kevin

    2016-07-01

    To assess the efficacy of a novel high-fidelity epistaxis simulator in teaching epistaxis management to junior otolaryngology head and neck surgery residents. Prospective cohort study. A novel high-fidelity epistaxis task trainer was developed using a cadaver head, intravenous tubing, and a food coloring-filled saline bag to emulate blood. Learners were instructed on two techniques of nasal packing (formal nasal pack and nasal tampon) for the management of epistaxis using the task trainer. Learners were videotaped attempting to pack the nose of the task trainer pre- and postintervention (verbal instruction, and practice time with task trainer). Five board-certified otolaryngologists (blinded to pre- and postintervention status) evaluated the packing technique using standardized subjective outcome measures. There were 13 junior otolaryngology residents enrolled in the study. This cohort showed a statistically significant increase in global rating scores (P epistaxis simulator has been successful in teaching and the practical application of various skills in epistaxis management. This task trainer appears to confer an educational benefit in technical skills acquisition in novice learners. Further studies are needed to determine long-term skill retention. Simulation is a promising educational adjunct that effectively enhances epistaxis management skills acquisition while maximizing patient safety. NA. Laryngoscope, 126:1501-1503, 2016. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

  15. The reactor trainer: state-of-the-art classroom learning

    International Nuclear Information System (INIS)

    Stater, R.G.

    1996-01-01

    The Reactor Trainer is a professional, PC based, graphically enhanced, training resource specifically developed and customized for Class Room teaching of and learning about, reactor behavior. This unique, and focused, learning-target sets The Trainer apart from the panorama of the more common PC plant simulator. Its educational scope extends along a logical learning path, starting with important fundamental behavioral concepts of delayed neutrons, neutron multiplying factors, and reactor rate, moving to simple reactor transients in real time, and culminating with more complex operational evolutions. The Trainer empowers the Instructor with a dynamic Class Room demonstrator and the student with a superior hands-on learning tool. The Trainer's versatility encompasses a wide variety of educational needs, including initial operator training, requalification training, Shift Technical Advisor training, and other advanced or specialized training. In addition, The Reactor Trainer enhances prerequisite preparation of operator candidates for full-scale control room training and, in so doing, PC economics relieves full-scale simulator hours. (author)

  16. Inspector measurement verification activities

    International Nuclear Information System (INIS)

    George, R.S.; Crouch, R.

    e most difficult and complex activity facing a safeguards inspector involves the verification of measurements and the performance of the measurement system. Remeasurement is the key to measurement verification activities. Remeasurerements using the facility's measurement system provide the bulk of the data needed for determining the performance of the measurement system. Remeasurements by reference laboratories are also important for evaluation of the measurement system and determination of systematic errors. The use of these measurement verification activities in conjunction with accepted inventory verification practices provides a better basis for accepting or rejecting an inventory. (U.S.)

  17. Math, blackboard and the trainers of mathematics' teachers: interpreting relations

    Directory of Open Access Journals (Sweden)

    Ana Cláudia de Melo Sanches

    2009-06-01

    Full Text Available The relation of teachers with the blackboard and the practical skills teachers developed in the educational process was and still is subject little discussed in the setting of educational research, because for a long time, the blackboard was synonymous of traditional and bank education and without any possibility of transformation didactic. The objective this work is to show important results on the subject, from the voices of some trainers of mathematics' teachers of Para, since the research identified in the constitution of trainers, personal and collective influences about particular knowledge to how use the blackboard as tool mediation in the educational space. At times and in different discourses, the blackboard was regarded as "auxiliary memory" of the construction of mathematical reasoning, and, for some trainers, mathematics is essentially visual. Thus, this article aims to contribute to theoretical discussions from the action in the classroom

  18. Proceedings of the Defense Nuclear Agency Conference on Arms Control and Verification Technology (ACT) Held in Williamsburg, Virginia on 1-4 June 1992

    Science.gov (United States)

    1993-12-01

    vapor recovery system or flare . For instance, under these regulations, sampling connecting systems must be equipped with a closed-purge system or closed...12% 233U/U) PWR BWR Total HM (kg) 460 188 460 460(130 U)a Charge (kg) 235U 13.5 5.5 10.6 0.9 233U - - 13.8 Pu - - 3.7 - Discharge (kg) 235U 3.5 1.6...early 1991.5 The purpose of the ARS experiments was to simulate CW verification measurements under realistic conditions and to determine the maximum

  19. National Athletic Trainers' Association Position Statement: Management of Sport Concussion

    Science.gov (United States)

    Broglio, Steven P.; Cantu, Robert C.; Gioia, Gerard A.; Guskiewicz, Kevin M.; Kutcher, Jeffrey; Palm, Michael; McLeod, Tamara C. Valovich

    2014-01-01

    Objective: To provide athletic trainers, physicians, and other health care professionals with best-practice guidelines for the management of sport-related concussions. Background: An estimated 3.8 million concussions occur each year in the United States as a result of sport and physical activity. Athletic trainers are commonly the first medical providers available onsite to identify and evaluate these injuries. Recommendations: The recommendations for concussion management provided here are based on the most current research and divided into sections on education and prevention, documentation and legal aspects, evaluation and return to play, and other considerations. PMID:24601910

  20. Managing the Verification Trajectory

    NARCIS (Netherlands)

    Ruys, T.C.; Brinksma, Hendrik

    In this paper we take a closer look at the automated analysis of designs, in particular of verification by model checking. Model checking tools are increasingly being used for the verification of real-life systems in an industrial context. In addition to ongoing research aimed at curbing the

  1. Verification Account Management System (VAMS)

    Data.gov (United States)

    Social Security Administration — The Verification Account Management System (VAMS) is the centralized location for maintaining SSA's verification and data exchange accounts. VAMS account management...

  2. Nuclear Data Verification and Standardization

    Energy Technology Data Exchange (ETDEWEB)

    Karam, Lisa R.; Arif, Muhammad; Thompson, Alan K.

    2011-10-01

    The objective of this interagency program is to provide accurate neutron interaction verification and standardization data for the U.S. Department of Energy Division of Nuclear Physics programs which include astrophysics, radioactive beam studies, and heavy-ion reactions. The measurements made in this program are also useful to other programs that indirectly use the unique properties of the neutron for diagnostic and analytical purposes. These include homeland security, personnel health and safety, nuclear waste disposal, treaty verification, national defense, and nuclear based energy production. The work includes the verification of reference standard cross sections and related neutron data employing the unique facilities and capabilities at NIST and other laboratories as required; leadership and participation in international intercomparisons and collaborations; and the preservation of standard reference deposits. An essential element of the program is critical evaluation of neutron interaction data standards including international coordinations. Data testing of critical data for important applications is included. The program is jointly supported by the Department of Energy and the National Institute of Standards and Technology.

  3. Teacher Trainers' Beliefs about Feedback on Teaching Practice: Negotiating the Tensions between Authoritativeness and Dialogic Space

    Science.gov (United States)

    Louw, Stephen; Todd, Richard Watson; Jimarkon, Pattamawan

    2016-01-01

    Contradictory tensions are apparent during the feedback given to pre-service English language teachers by trainers following their practice teaching. Trainers' beliefs may serve as a resource in dealing with these conflicting tensions. Trainers' beliefs about the feedback they provide during teaching practice conferences were elicited, and…

  4. TRAINER: Computer Assisted Learning and Practice for Users of DIALOG/ORBIT. Final Report.

    Science.gov (United States)

    Caruso, Elaine

    Trainee development, TRAINER programs, and dissemination strategies are treated in this summary of the TRAINER computer assisted learning program for scientists and other professionals who wish to do literature searches using online services. A discussion of TRAINER's rationale, design, constraints, and differing institutional implementations…

  5. 21 CFR 874.3320 - Group hearing aid or group auditory trainer.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Group hearing aid or group auditory trainer. 874... hearing aid or group auditory trainer. (a) Identification. A group hearing aid or group auditory trainer is a hearing aid that is intended for use in communicating simultaneously with one or more listeners...

  6. Experimental inventory verification system

    International Nuclear Information System (INIS)

    Steverson, C.A.; Angerman, M.I.

    1991-01-01

    As Low As Reasonably Achievable (ALARA) goals and Department of Energy (DOE) inventory requirements are frequently in conflict at facilities across the DOE complex. The authors wish, on one hand, to verify the presence of correct amounts of nuclear materials that are in storage or in process; yet on the other hand, we wish to achieve ALARA goals by keeping individual and collective exposures as low as social, technical, economic, practical, and public policy considerations permit. The Experimental Inventory Verification System (EIVSystem) is a computer-based, camera-driven system that utilizes image processing technology to detect change in vault areas. Currently in the test and evaluation phase at Idaho National Engineering Laboratory, this system guards personnel. The EIVSystem continually monitors the vault, providing proof of changed status for objects sorted within the vault. This paper reports that these data could provide the basis for reducing inventory requirements when no change has occurred, thus helping implement ALARA policy; the data will also help describe there target area of an inventory when change has been shown to occur

  7. Monitoring and verification R&D

    Energy Technology Data Exchange (ETDEWEB)

    Pilat, Joseph F [Los Alamos National Laboratory; Budlong - Sylvester, Kory W [Los Alamos National Laboratory; Fearey, Bryan L [Los Alamos National Laboratory

    2011-01-01

    The 2010 Nuclear Posture Review (NPR) report outlined the Administration's approach to promoting the agenda put forward by President Obama in Prague on April 5, 2009. The NPR calls for a national monitoring and verification R&D program to meet future challenges arising from the Administration's nonproliferation, arms control and disarmament agenda. Verification of a follow-on to New START could have to address warheads and possibly components along with delivery capabilities. Deeper cuts and disarmament would need to address all of these elements along with nuclear weapon testing, nuclear material and weapon production facilities, virtual capabilities from old weapon and existing energy programs and undeclared capabilities. We only know how to address some elements of these challenges today, and the requirements may be more rigorous in the context of deeper cuts as well as disarmament. Moreover, there is a critical need for multiple options to sensitive problems and to address other challenges. There will be other verification challenges in a world of deeper cuts and disarmament, some of which we are already facing. At some point, if the reductions process is progressing, uncertainties about past nuclear materials and weapons production will have to be addressed. IAEA safeguards will need to continue to evolve to meet current and future challenges, and to take advantage of new technologies and approaches. Transparency/verification of nuclear and dual-use exports will also have to be addressed, and there will be a need to make nonproliferation measures more watertight and transparent. In this context, and recognizing we will face all of these challenges even if disarmament is not achieved, this paper will explore possible agreements and arrangements; verification challenges; gaps in monitoring and verification technologies and approaches; and the R&D required to address these gaps and other monitoring and verification challenges.

  8. Monitoring and verification R and D

    International Nuclear Information System (INIS)

    Pilat, Joseph F.; Budlong-Sylvester, Kory W.; Fearey, Bryan L.

    2011-01-01

    The 2010 Nuclear Posture Review (NPR) report outlined the Administration's approach to promoting the agenda put forward by President Obama in Prague on April 5, 2009. The NPR calls for a national monitoring and verification R and D program to meet future challenges arising from the Administration's nonproliferation, arms control and disarmament agenda. Verification of a follow-on to New START could have to address warheads and possibly components along with delivery capabilities. Deeper cuts and disarmament would need to address all of these elements along with nuclear weapon testing, nuclear material and weapon production facilities, virtual capabilities from old weapon and existing energy programs and undeclared capabilities. We only know how to address some elements of these challenges today, and the requirements may be more rigorous in the context of deeper cuts as well as disarmament. Moreover, there is a critical need for multiple options to sensitive problems and to address other challenges. There will be other verification challenges in a world of deeper cuts and disarmament, some of which we are already facing. At some point, if the reductions process is progressing, uncertainties about past nuclear materials and weapons production will have to be addressed. IAEA safeguards will need to continue to evolve to meet current and future challenges, and to take advantage of new technologies and approaches. Transparency/verification of nuclear and dual-use exports will also have to be addressed, and there will be a need to make nonproliferation measures more watertight and transparent. In this context, and recognizing we will face all of these challenges even if disarmament is not achieved, this paper will explore possible agreements and arrangements; verification challenges; gaps in monitoring and verification technologies and approaches; and the R and D required to address these gaps and other monitoring and verification challenges.

  9. Designing Training Programmes for EIU and ESD: A Trainer's Guide

    Science.gov (United States)

    UNESCO Bangkok, 2006

    2006-01-01

    The training guide is based on a TOT (Training of Trainer) workshop conducted in September 2005 in Chiangmai, Thailand jointly by Asia Pacific Centre of Education for International Understanding (APCEIU) and UNESCO's Asia Pacific Programme of Educational Innovation for Development (APEID). The publication provides a comprehensive guide to trainers…

  10. 24 CFR 3286.307 - Process for obtaining trainer's qualification.

    Science.gov (United States)

    2010-04-01

    ..., including the dates and type of such employment. A trainer who is licensed, or otherwise certified, to... training provided in accordance with this subpart D will meet the curriculum requirements established in... confirms that an applicant has met the experience and curriculum requirements in this section, HUD will...

  11. In the Trainer's Voice: A Study of Training Transfer Practices

    Science.gov (United States)

    Hutchins, Holly M.

    2009-01-01

    Data were gathered from members of a large professional training organization regarding their practices for supporting training transfer. Transfer factor categories grounded in the literature were used to code the data using content analysis procedures. Commensurate with the transfer literature, results suggest that trainers reported strategies…

  12. A Comparison of Three Models of Ellipticdal Trainer

    Science.gov (United States)

    2006-08-31

    Medicine and Science in Sports and Exercise , 31...on the elliptical trainer compared to the treadmill. Medicine and Science in Sports and Exercise , 31, S158. Popper, K. R. (1959). The logic of...comparison to treadmill walking and running, stationary cycling, and stepping. Medicine and Science in Sports and Exercise , 30, S168. Rogosa, D.

  13. National Athletic Trainers' Association Position Statement: Exertional Heat Illnesses

    Science.gov (United States)

    Casa, Douglas J.; DeMartini, Julie K.; Bergeron, Michael F.; Csillan, Dave; Eichner, E. Randy; Lopez, Rebecca M.; Ferrara, Michael S.; Miller, Kevin C.; O'Connor, Francis; Sawka, Michael N.; Yeargin, Susan W.

    2015-01-01

    Objective  To present best-practice recommendations for the prevention, recognition, and treatment of exertional heat illnesses (EHIs) and to describe the relevant physiology of thermoregulation. Background  Certified athletic trainers recognize and treat athletes with EHIs, often in high-risk environments. Although the proper recognition and successful treatment strategies are well documented, EHIs continue to plague athletes, and exertional heat stroke remains one of the leading causes of sudden death during sport. The recommendations presented in this document provide athletic trainers and allied health providers with an integrated scientific and clinically applicable approach to the prevention, recognition, treatment of, and return-to-activity guidelines for EHIs. These recommendations are given so that proper recognition and treatment can be accomplished in order to maximize the safety and performance of athletes. Recommendations  Athletic trainers and other allied health care professionals should use these recommendations to establish onsite emergency action plans for their venues and athletes. The primary goal of athlete safety is addressed through the appropriate prevention strategies, proper recognition tactics, and effective treatment plans for EHIs. Athletic trainers and other allied health care professionals must be properly educated and prepared to respond in an expedient manner to alleviate symptoms and minimize the morbidity and mortality associated with these illnesses. PMID:26381473

  14. Intelligent Virtual Agents as Language Trainers Facilitate Multilingualism

    Directory of Open Access Journals (Sweden)

    Manuela eMacedonia

    2014-04-01

    Full Text Available In this paper we introduce a new generation of language trainers: intelligent virtual agents (IVAs with human appearance and the capability to teach foreign language vocabulary. We report results from studies that we have conducted with Billie, an IVA employed as a vocabulary trainer, as well as research findings on the acceptance of the agent as a trainer by adults and children. The results show that Billie can train humans as well as a human teacher can and that both adults and children accept the IVA as a trainer. The advantages of IVAs are multiple. First, their teaching methods can be based on neuropsychological research findings concerning memory and learning practice. Second, virtual teachers can provide individualized training. Third, they coach users during training, are always supportive, and motivate learners to train. Fourth, agents will reside in the user’s mobile devices and thus be at the user’s disposal everywhere and anytime. Agents in apps will make foreign language training accessible to anybody at low cost. This will enable people around the world, including physically, financially and geographically disadvantaged persons, to learn a foreign language and help to facilitate multilingualism.

  15. Pindar's Tenth Olympian and athlete-trainer pederasty.

    Science.gov (United States)

    Hubbard, Thomas

    2005-01-01

    The comparison of the adolescent boxer Hagesidamus and his trainer Ilas to Patroclus and Achilles in Pindar's Olympian 10.16-21 and the subsequent comparison of Hagesidamus to Ganymede in Olympian 10.99-105 suggest that the relationship was in some sense pederastic, particularly in the wake of Aeschylus' treatment of Achilles and Patroclus in these terms in Myrmidons. This possibility motivates a broader examination of the evidence for such relationships in fifth-century Greece. There is no doubt that the palaestra was a central locus for the formation of pederastic liaisons and that athletic nudity was integral to the esthetic construction of adolescent beauty. There is also no doubt that the trainer's position afforded him regular intimacy and close physical contact with boys; several Hellenistic texts take for granted the erotic opportunities connected with the position. The Solonian law presuming to protect pupils from such relationships, attested in Aeschines, was probably a late fifth-century development in reaction to their common occurrence in earlier generations. Evidence also exists for lovers acting as financial backers to boy athletes or as informal trainers. Some of the most intriguing evidence for the conflation of the trainer's and lover's roles can be found in red-figure vase painting of the late sixth and fifth centuries.

  16. Practice until you can preach anything: The Presentation Trainer

    NARCIS (Netherlands)

    Schneider, Jan

    2015-01-01

    Public speaking skills are relevant for many professions, developing these skills requires practice and feedback. In order to get this feedback we developed the Presentation Trainer, a tool that automatically tracks your voice, posture and movements to give you feedback about your nonverbal

  17. Development Aspects of a Robotised Gait Trainer for Neurological Rehabilitation

    National Research Council Canada - National Science Library

    Schmidt, H

    2001-01-01

    ... of constructing a sensorised robot gait trainer is under way. The aim of this project is to build a robotic device which enables the therapist to let the machine move the patients feet, fixed on two footplates, on programmable foot trajectories (e.g...

  18. Management of Cerebral Concussion in Sports: The Athletic Trainer's Perspective.

    Science.gov (United States)

    Oliaro, Scott; Anderson, Scott; Hooker, Dan

    2001-01-01

    Presents a new approach in the evaluation and management of concussions from the athletic trainer's perspective. This quantifiable assessment technique provides more information on which return-to-play decisions can be made based on the athlete's symptoms and performance on objective tests. It can be used during initial sideline examinations as…

  19. Advanced verification topics

    CERN Document Server

    Bhattacharya, Bishnupriya; Hall, Gary; Heaton, Nick; Kashai, Yaron; Khan Neyaz; Kirshenbaum, Zeev; Shneydor, Efrat

    2011-01-01

    The Accellera Universal Verification Methodology (UVM) standard is architected to scale, but verification is growing and in more than just the digital design dimension. It is growing in the SoC dimension to include low-power and mixed-signal and the system integration dimension to include multi-language support and acceleration. These items and others all contribute to the quality of the SOC so the Metric-Driven Verification (MDV) methodology is needed to unify it all into a coherent verification plan. This book is for verification engineers and managers familiar with the UVM and the benefits it brings to digital verification but who also need to tackle specialized tasks. It is also written for the SoC project manager that is tasked with building an efficient worldwide team. While the task continues to become more complex, Advanced Verification Topics describes methodologies outside of the Accellera UVM standard, but that build on it, to provide a way for SoC teams to stay productive and profitable.

  20. Perawatan Pergeseran Mandibula dan Kliking Menggunakan Teknik Edgewise dan Trainer

    Directory of Open Access Journals (Sweden)

    Rully Utami

    2014-06-01

    Full Text Available Kasus ini terjadi pada perempuan usia 22 tahun yang bersedia dipublikasikan untuk kepentingan  ilmu pengetahuan. Keluhan utama mandibula dan dagunya bergeser ke kanan, gigitan terbuka posterior dan bunyi click di persendian temporomandibular. Diagnosis pasien adalah maloklusi Angle kelas III tipe dento skeletal, pergeseran garis tengah mandibula dan dagu ke kanan, gigitan terbuka posterior dan clicking pada sendi temporomandibular. Perawatan dilakukan dengan teknik Edgewise dan trainer. Leveling dan unraveling dilakukan menggunakan kawat stainless steel bulat diameter 0,014 mm dengan multiloop. Trainer digunakan untuk koreksi pergeseran mandibula. Perawatan dilakukan selama 11 bulan, dan menunjukkan hasil hubungan molar pertama kanan menjadi kelas I. Overjet meningkat dari 0,1 mm menjadi 2 mm, overbite meningkat dari 0,2 mm menjadi 2,57 mm, garis tengah mandibula yang semula bergeser ke kanan 4,38 mm menjadi 2,53 mm, gigitan terbuka posterior dan clicking telah terkoreksi. Compromised Treatment of Class III Malocclusion with Mandibular Shifting, Posterior Openbite and Clicking Using Edgewise Technique and Trainer In Adult. This case report described the treatment of an adult female 22 years old who complained that her mandibula and chin shift to the right, posterior openbite and clicking. The patient diagnosed class III molar relationship, skeletal class III malocclusion, mandibular midline and chin shift to the right, posterior openbite and clicking on temporomandibular joint. Treatment was conducted using combination between  Edgewise Technique and trainer.  Leveling and unraveling are achieved by round stainless steel archwire 0,014 mm with multiloop. Trainer used to corrected the mandibular shifting. Result after 1 years treatment showed that the right molar relationship became class I, overjet increased  from 0,1 mm to 2 mm, overbite increased  from 0,2 mm to 2,57 mm, mandibular midline shifting decresed from 4,38 mm to 2,53 mm

  1. [Certification of therapy institutions, obesity trainers, and obesity trainer academies by the German Working Group on Obesity in Children and Adolescents (AGA)].

    Science.gov (United States)

    Holl, R W; Kersting, M; Kromeyer-Hauschild, K; Reinehr, T; Schäfer, A; Tiedjen, U; Widhalm, K

    2011-05-01

    There is a vast choice of behavioral therapy for obesity in children and adolescents, with wide differences in quality. In order to provide orientation for families, physicians, and health insurance companies, the German Working Group on Obesity in Children and Adolescents (AGA), which is affiliated with the German Obesity Society (DAG) and the German Pediatric Society (DGKJ), offers to certify institutions providing patient education programs for obese children and adolescents, obesity trainers, and academies for obesity trainers. Currently, 60 institutions offer obesity care, while 81 obesity trainers and 8 trainer academies are certified. This article summarizes requirements for certification and preliminary experience.

  2. Distributed Engine Control Empirical/Analytical Verification Tools, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In this Phase I project, Impact Technologies, in collaboration with Prof. R.K. Yedavalli, propose a novel verification environment for eventual rapid certification...

  3. A virtual trainer concept for robot-assisted human motor learning in rowing

    Directory of Open Access Journals (Sweden)

    Baumgartner L.

    2011-12-01

    Full Text Available Keeping the attention level and observing multiple physiological and biomechanical variables at the same time at high precision is very challenging for human trainers. Concurrent augmented feedback, which is suggested to enhance motor learning in complex motor tasks, can also hardly be provided by a human trainer. Thus, in this paper, a concept for a virtual trainer is presented that may overcome the limits of a human trainer. The intended virtual trainer will be implemented in a CAVE providing auditory, visual and haptic cues. As a first application, the virtual trainer will be used in a realistic scenario for sweep rowing. To provide individual feedback to each rower, the virtual trainer quantifies errors and provides concurrent auditory, visual, and haptic feedback. The concurrent feedback will be adapted according to the actual performance, individual maximal rowing velocity, and the athlete’s individual perception.

  4. Standard Verification System (SVS)

    Data.gov (United States)

    Social Security Administration — SVS is a mainframe program that accesses the NUMIDENT to perform SSN verifications. This program is called by SSA Internal applications to verify SSNs. There is also...

  5. SSN Verification Service

    Data.gov (United States)

    Social Security Administration — The SSN Verification Service is used by Java applications to execute the GUVERF02 service using the WebSphere/CICS Interface. It accepts several input data fields...

  6. Nuclear test ban verification

    International Nuclear Information System (INIS)

    Chun, Kin-Yip

    1991-07-01

    This report describes verification and its rationale, the basic tasks of seismic verification, the physical basis for earthquake/explosion source discrimination and explosion yield determination, the technical problems pertaining to seismic monitoring of underground nuclear tests, the basic problem-solving strategy deployed by the forensic seismology resarch team at the University of Toronto, and the scientific significance of the team's research. The research carried out at the Univeristy of Toronto has two components: teleseismic verification using P wave recordings from the Yellowknife Seismic Array (YKA), and regional (close-in) verification using high-frequency L g and P n recordings from the Eastern Canada Telemetered Network. Major differences have been found in P was attenuation among the propagation paths connecting the YKA listening post with seven active nuclear explosion testing areas in the world. Significant revisions have been made to previously published P wave attenuation results, leading to more interpretable nuclear explosion source functions. (11 refs., 12 figs.)

  7. Verification of RADTRAN

    International Nuclear Information System (INIS)

    Kanipe, F.L.; Neuhauser, K.S.

    1995-01-01

    This document presents details of the verification process of the RADTRAN computer code which was established for the calculation of risk estimates for radioactive materials transportation by highway, rail, air, and waterborne modes

  8. The Educational Media Specialist: Training the Trainer.

    Science.gov (United States)

    Mendrinos, Roxanne Baxter

    1987-01-01

    Describes a program designed to integrate new technology into the junior high school curriculum with emphasis on the role of the media specialist. Five steps are detailed: (1) needs assessment; (2) planning with teacher input how to fill student needs; (3) teacher training; (4) implementation; and (5) evaluation. (9 references) (MES)

  9. Virtual Environments for Advanced Trainers and Simulators

    NARCIS (Netherlands)

    Jense, G.J.; Kuijper, F.

    1993-01-01

    Virtual environment technology is expected to make a big impact on future training and simulation systems. Direct stimulation of human senses (eyesight, auditory, tactile) and new paradigms for user input will improve the realism of simulations and thereby the effectiveness of training systems.

  10. Multilateral disarmament verification

    International Nuclear Information System (INIS)

    Persbo, A.

    2013-01-01

    Non-governmental organisations, such as VERTIC (Verification Research, Training and Information Centre), can play an important role in the promotion of multilateral verification. Parties involved in negotiating nuclear arms accords are for the most part keen that such agreements include suitable and robust provisions for monitoring and verification. Generally progress in multilateral arms control verification is often painstakingly slow, but from time to time 'windows of opportunity' - that is, moments where ideas, technical feasibility and political interests are aligned at both domestic and international levels - may occur and we have to be ready, so the preparatory work is very important. In the context of nuclear disarmament, verification (whether bilateral or multilateral) entails an array of challenges, hurdles and potential pitfalls relating to national security, health, safety and even non-proliferation, so preparatory work is complex and time-greedy. A UK-Norway Initiative was established in order to investigate the role that a non-nuclear-weapon state such as Norway could potentially play in the field of nuclear arms control verification. (A.C.)

  11. Packaged low-level waste verification system

    International Nuclear Information System (INIS)

    Tuite, K.T.; Winberg, M.; Flores, A.Y.; Killian, E.W.; McIsaac, C.V.

    1996-01-01

    Currently, states and low-level radioactive waste (LLW) disposal site operators have no method of independently verifying the radionuclide content of packaged LLW that arrive at disposal sites for disposal. At this time, disposal sites rely on LLW generator shipping manifests and accompanying records to insure that LLW received meets the waste acceptance criteria. An independent verification system would provide a method of checking generator LLW characterization methods and help ensure that LLW disposed of at disposal facilities meets requirements. The Mobile Low-Level Waste Verification System (MLLWVS) provides the equipment, software, and methods to enable the independent verification of LLW shipping records to insure that disposal site waste acceptance criteria are being met. The MLLWVS system was developed under a cost share subcontract between WMG, Inc., and Lockheed Martin Idaho Technologies through the Department of Energy's National Low-Level Waste Management Program at the Idaho National Engineering Laboratory (INEL)

  12. Embedded software verification and debugging

    CERN Document Server

    Winterholer, Markus

    2017-01-01

    This book provides comprehensive coverage of verification and debugging techniques for embedded software, which is frequently used in safety critical applications (e.g., automotive), where failures are unacceptable. Since the verification of complex systems needs to encompass the verification of both hardware and embedded software modules, this book focuses on verification and debugging approaches for embedded software with hardware dependencies. Coverage includes the entire flow of design, verification and debugging of embedded software and all key approaches to debugging, dynamic, static, and hybrid verification. This book discusses the current, industrial embedded software verification flow, as well as emerging trends with focus on formal and hybrid verification and debugging approaches. Includes in a single source the entire flow of design, verification and debugging of embedded software; Addresses the main techniques that are currently being used in the industry for assuring the quality of embedded softw...

  13. Personal Trainer Perceptions of Providing Nutrition Care to Clients: A Qualitative Exploration.

    Science.gov (United States)

    Barnes, Katelyn; Ball, Lauren; Desbrow, Ben

    2017-04-01

    Personal trainers are well placed to provide basic nutrition care in line with national dietary guidelines. However, many personal trainers provide nutrition care beyond their scope of practice and this has been identified as a major industry risk due to a perceived lack of competence in nutrition. This paper explores the context in which personal trainers provide nutrition care, by understanding personal trainers' perceptions of nutrition care in relation to their role and scope of practice. Semistructured telephone interviews were conducted with 15 personal trainers working within Australia. Thematic analysis was used to identify key themes. All personal trainers reported to provide nutrition care and reported that nutrition care was an important component of their role. Despite this, many were unaware or uncertain of the scope of practice for personal trainers. Some personal trainers reported a gap between the nutrition knowledge they received in their formal education, and the knowledge they needed to optimally support their clients to adopt healthy dietary behaviors. Overall, the personal training context is likely to be conducive to providing nutrition care. Despite concerns about competence personal trainers have not modified their nutrition care practices. To ensure personal trainers provide nutrition care in a safe and effective manner, greater enforcement of the scope of practice is required as well as clear nutrition competencies or standards to be developed during training.

  14. VERTICAL CONTROL OF OVERBITE IN MIXED DENTITION BY TRAINER SYSTEM

    Directory of Open Access Journals (Sweden)

    Miroslava Dinkova

    2014-11-01

    Full Text Available Purpose. The purpose of this study is to follow-up the biometrical and skeletal vertical changes in patients with deep overbite in mixed dentition after a functional orthodontic treatment with Trainer System™ is conducted. Material and Methods. 32 patients (20 girls and 12 boys with deep overbite in mixed dentition were followed-up. An orthodontic treatment with Trainer System™, including Trainer for kids (T4K-blue, T4K-red and Myobrace was conducted. The recommended time for wearing the appliances was 8–12 hours, mostly at the night and 1–2 hours total time during the day. All the patients were photo-documented. Impressions, panoramic radiographs and lateral cephalograms were taken before the beginning of the treatment and at the end of every single step in relation with every change of appliances. Comparative biometrical and cephalometric analyses were made. The data was statistically processed. Results. The comparative biometrical analyses showed reduction of overbite with 2.5–3.5 mm after the end of the orthodontic treatment. 62% of cases showed relapse from 0.5 to 1mm. After the end of the orthodontic treatment an inclination of upper and lower incisors and changes with M/SN, М/F, ANB, SNA, SNB values were established. Conclusions. If untreated during the growing period, deep overbite leads to serious functional disorders, pathologic abrasion and myo-articular problems. Myofunctional Trainer System™ is successfully applied in the management of deep overbite in growing kids with early mixed dentition. The design of appliances helps the right positioning of tongue and jaws, removes bad habits, harmonizes tooth arches, corrects the vertical problems.

  15. Blended learning in CME: the perception of GP trainers.

    Science.gov (United States)

    Te Pas, E; Meinema, J G; Visser, M R M; van Dijk, N

    2016-05-01

    Blended learning (the combination of electronic methods with traditional teaching methods) has the potential to combine the best of traditional education with the best of computer-mediated training. We chose to develop such an intervention for GP trainers who were undertaking a Continuing Medical Education (CME) course in evidence-based medicine (EBM). This study reports on our experience and investigated the factors influencing the perception on usefulness and logistics of blended learning for learners in CME. In total, 170 GP trainers participated in the intervention. We used questionnaires, observations during the four face-to-face meetings and evaluations in the e-course over one year. Additionally we organised focus groups to gain insight in some of the outcomes of the questionnaires and interpretations of the observations. The GP trainers found the design and the educational method (e-course in combination with meetings) attractive, instructive and complementary. Factors influencing their learning were (1) educational design, (2) educational method, (3) topic of the intervention, (4) time (planning), (5) time (intervention), (6) learning style, (7) technical issues, (8) preconditions and (9) level of difficulty. A close link between daily practice and the educational intervention was considered an important precondition for the success of the intervention in this group of learners. GP trainers were positive about blended learning: they found e-learning a useful way to gain knowledge and the meetings a pleasant way of transferring the knowledge into practice. Although some preconditions should be taken into consideration during its development and implementation, they would participate in similarly designed learning in the future.

  16. The Organizational Climate in Collegiate Athletics: An Athletic Trainer's Perspective.

    Science.gov (United States)

    Mazerolle, Stephanie M; Eason, Christianne M

    2018-01-01

      An organizational climate is largely based on an employee's perceptions of the working conditions in which he or she engages regularly. A multifaceted concept, the organizational climate is often formed by perceptions of employee welfare, rewards, and support. Achieving work-life balance is also a part of the climate.   To learn collegiate athletic trainers' perceptions of organizational climate and specifically how it may pertain to their work-life balance.   Phenomenologic study.   Collegiate practice setting.   Thirty athletic trainers working in the collegiate athletics setting took part in 1-on-1 phone interviews. The participants were 30.5 (interquartile range [IQR] = 7.75) years old and had been certified for 7 (IQR = 5) years and at their current position for 4 (IQR = 3) years.   Participants completed a phone interview that followed a semistructured framework. All transcribed interviews were analyzed using a phenomenologic approach. Researcher triangulation, expert review, and data saturation were used to establish credibility.   Athletic trainers working in the collegiate athletics setting who had positive perceptions of their work-life balance described their organizational climate as family friendly. Our participants' supervisors allowed for autonomy related to work scheduling, which provided opportunities for work-life balance. These athletic trainers believed that they worked in a climate that was collegial, which was helpful for work-life balance. In addition, the importance of placing family first was part of the climate.   The perceptions of our participants revealed a climate of family friendliness, supervisor support, and collegiality among staff members, which facilitated the positive climate for work-life balance. The mindset embraced the importance of family and recognized that work did not always have to supersede personal priorities.

  17. Diagnostic problem solving in male collegiate athletic trainers.

    Science.gov (United States)

    Gardin, Fredrick A; Mensch, James M

    2014-01-01

    Knowledge and experience may be important factors for understanding expertise based upon a clinician's ability to select and execute an appropriate response as a clinician during injury evaluation. To describe how collegiate male certified athletic trainers represent injury-evaluation domain knowledge during a situational interview using a think-aloud protocol. Qualitative. National Collegiate Athletic Association Division I and II colleges in National Athletic Trainers' Association District 3. A total of 20 male certified athletic trainers (n = 10 with less than 2 years of experience in the college setting and n = 10 with at least 10 years of experience in the college setting) participated in the study. We collected data using a situational interview and questionnaire. Data were transcribed, reduced to meaningful units, and analyzed using verbal analysis procedures. Member checks, triangulation of data, field journaling, and peer-debriefing techniques were used to ensure trustworthiness of the data. Knowledge concepts were enumerated to describe differences between experts and novices. Compared with novices, experts had more knowledge concepts of patient history and predictions and fewer concepts of situation appraisal. Expertise in athletic training shares traits with other areas in health care. Athletic training education and professional development may benefit from our understanding which cognitive processes differentiate expert practice. Future investigators should attempt to describe other settings and study diagnostic problem solving in a natural environment.

  18. PROFESSIONAL DEVELOPMENT OF BEGINNING TEACHER TRAINERS OF DEGREE COURSES

    Directory of Open Access Journals (Sweden)

    Laurizete Ferragut Passos

    2016-12-01

    Full Text Available The research assumes that the presence of a renewed faculty has been working in the Teaching Degree and Pedagogy courses, specific contexts of initial teacher training. These training teachers are starting a career in higher education and part of them carries significant experience as a teacher of basic education. Knowing what constitutes the professional development of this trainer, beginner in a segment, higher education, and experienced in another, basic education, and reflect on the perception of their performance and their role as trainers of future teachers constituted the research objectives. For this article we will analyze the interview data from a beginning teacher in the Bachelor's Degree. The text is provided by the studies by Marcelo Garcia (1999; Day (2001; Wedge (2005; Imbernon (2009, 2011; Vaillant and Marcelo (2012; among others. The results show that the teacher realizes the process of their professional development to be always in progress, non-linear, crossed by different factors, with a permanent feeling of incompleteness; recalls the importance of the work period in basic education schools for their professional development and performance as a teacher trainer.

  19. Intelligent virtual agents as language trainers facilitate multilingualism.

    Science.gov (United States)

    Macedonia, Manuela; Groher, Iris; Roithmayr, Friedrich

    2014-01-01

    intelligent virtual agents (IVAs) with human appearance and the capability to teach foreign language vocabulary. We report results from studies that we have conducted with Billie, an IVA employed as a vocabulary trainer, as well as research findings on the acceptance of the agent as a trainer by adults and children. The results show that Billie can train humans as well as a human teacher can and that both adults and children accept the IVA as a trainer. The advantages of IVAs are multiple. First, their teaching methods can be based on neuropsychological research findings concerning memory and learning practice. Second, virtual teachers can provide individualized training. Third, they coach users during training, are always supportive, and motivate learners to train. Fourth, agents will reside in the user's mobile devices and thus be at the user's disposal everywhere and anytime. Agents in apps will make foreign language training accessible to anybody at low cost. This will enable people around the world, including physically, financially, and geographically disadvantaged persons, to learn a foreign language and help to facilitate multilingualism.

  20. Procedure generation and verification

    International Nuclear Information System (INIS)

    Sheely, W.F.

    1986-01-01

    The Department of Energy has used Artificial Intelligence of ''AI'' concepts to develop two powerful new computer-based techniques to enhance safety in nuclear applications. The Procedure Generation System, and the Procedure Verification System, can be adapted to other commercial applications, such as a manufacturing plant. The Procedure Generation System can create a procedure to deal with the off-normal condition. The operator can then take correct actions on the system in minimal time. The Verification System evaluates the logic of the Procedure Generator's conclusions. This evaluation uses logic techniques totally independent of the Procedure Generator. The rapid, accurate generation and verification of corrective procedures can greatly reduce the human error, possible in a complex (stressful/high stress) situation

  1. Verification and validation benchmarks.

    Energy Technology Data Exchange (ETDEWEB)

    Oberkampf, William Louis; Trucano, Timothy Guy

    2007-02-01

    Verification and validation (V&V) are the primary means to assess the accuracy and reliability of computational simulations. V&V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V&V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the level of

  2. Verification and validation benchmarks

    International Nuclear Information System (INIS)

    Oberkampf, William L.; Trucano, Timothy G.

    2008-01-01

    Verification and validation (V and V) are the primary means to assess the accuracy and reliability of computational simulations. V and V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V and V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the

  3. Training for Future Esp Trainers: Evaluating the Training of Trainers (TOT Program in Labuan Bajo, Manggarai Barat, Flores

    Directory of Open Access Journals (Sweden)

    Irfan Rifai

    2013-04-01

    Full Text Available By cooperating with Yayasan Komodo Kita and Mandiri Bank, English department of Binus University was chiefly in charge of a 15 day Training Of Trainers (TOT program for 24 participants prepared for teaching English in Labuan Bajo, Flores. The training was aimed to prepare already fluent- in – English- teachers, tour guides, and university graduates with the right tools and method in teaching English. To assess the program, a set of evaluation questionnaire was given to the participants to know their responses on the training material, the trainers, and the program by using Likert’s scale type questions. An observational record was also used as a tool to measure participants’ achievement. The questionnaire reveals that the participants respond positively to the program and the material and favor the approaches made by the trainers during the training. However, the training shows various results in participants’ performance. It is assumed that the non teaching background of the majority of participants and the level of English as two key factors influencing their performance.  

  4. Qualification and training of the trainers, verifiers, licensors and upper management

    International Nuclear Information System (INIS)

    Recker, M.

    1986-01-01

    Within the scope of technology transfer, also the know-how transfer should be included. It is no longer sufficient to train once the operating personnel, retraining and training of new employees must be performed during all the time. For the performance of training, qualified trainers and instructors should be available. A suitable training program will be explained in detail. To operate a plant effectively, it is important to train the operating personnel, but of the same importance is also to have a well functioning management, which will be achieved by training methods and programs to be defined in detail. The adherence to rules and regulations has to be controlled by authorities. The duties and the respective training programs are shown in this report. (orig.)

  5. Open verification methodology cookbook

    CERN Document Server

    Glasser, Mark

    2009-01-01

    Functional verification is an art as much as a science. It requires not only creativity and cunning, but also a clear methodology to approach the problem. The Open Verification Methodology (OVM) is a leading-edge methodology for verifying designs at multiple levels of abstraction. It brings together ideas from electrical, systems, and software engineering to provide a complete methodology for verifying large scale System-on-Chip (SoC) designs. OVM defines an approach for developing testbench architectures so they are modular, configurable, and reusable. This book is designed to help both novic

  6. Requirement Assurance: A Verification Process

    Science.gov (United States)

    Alexander, Michael G.

    2011-01-01

    Requirement Assurance is an act of requirement verification which assures the stakeholder or customer that a product requirement has produced its "as realized product" and has been verified with conclusive evidence. Product requirement verification answers the question, "did the product meet the stated specification, performance, or design documentation?". In order to ensure the system was built correctly, the practicing system engineer must verify each product requirement using verification methods of inspection, analysis, demonstration, or test. The products of these methods are the "verification artifacts" or "closure artifacts" which are the objective evidence needed to prove the product requirements meet the verification success criteria. Institutional direction is given to the System Engineer in NPR 7123.1A NASA Systems Engineering Processes and Requirements with regards to the requirement verification process. In response, the verification methodology offered in this report meets both the institutional process and requirement verification best practices.

  7. POINTER: Portable Intelligent Trainer for External Robotics

    Science.gov (United States)

    Kuiper, Hilbert; Rikken, Patrick J.

    1994-01-01

    Intelligent tutoring systems (ITS's) play an increasing role in training and education of people with different levels of skill and knowledge. As compared to conventional computer based training (CBT) an ITS provides more tailored instruction by trying to mimic the teaching behavior of a human instructor as much as possible and is therefore much more flexible. This paper starts with an introduction to ITS's, followed by the description of an ITS for training of an (astronaut) operator in monitoring and controlling robotic arm procedures. The robotic arm will be used for exchange of equipment between a space station and a space plane involving critical and accurate movements of the robotic arm. The ITS for this application, called Pointer, is developed by TNO Physics and Electronics Laboratory and is based upon an existing ITS that includes procedural training. Pointer has been developed on a workstation whereas the target platform was a portable computer. Therefore, a lot of attention had to be paid to scaling effects and keeping up with user friendliness of the much smaller user interface. Although the learning domain was the control of a robotic arm, it is clear that use of intelligent training technologies on a portable computer has many other applications (payload operations, operation control rooms, etc.). Training can occur at any time and place in an attractive and cost effective way.

  8. Accuracy Verification of Magnetic Resonance Imaging (MRI) Technology for Lower-Limb Prosthetic Research: Utilising Animal Soft Tissue Specimen and Common Socket Casting Materials

    OpenAIRE

    Safari, Mohammad Reza; Rowe, Philip; Buis, Arjan

    2012-01-01

    Lower limb prosthetic socket shape and volume consistency can be quantified using MRI technology. Additionally, MRI images of the residual limb could be used as an input data for CAD-CAM technology and finite element studies. However, the accuracy of MRI when socket casting materials are used has to be defined. A number of six, 46 mm thick, cross-sections of an animal leg were used. Three specimens were wrapped with Plaster of Paris (POP) and the other three with commercially available silico...

  9. A 3D virtual reality ophthalmoscopy trainer.

    Science.gov (United States)

    Wilson, Andrew S; O'Connor, Jake; Taylor, Lewis; Carruthers, David

    2017-12-01

    Performing eye examinations is an important clinical skill that medical students often find difficult to become proficient in. This paper describes the development and evaluation of an innovative 3D virtual reality (VR) training application to support learning these skills. The VR ophthalmoscope was developed by a clinical team and technologist using the unity game engine, smartphone and virtual reality headset. It has a series of tasks that include performing systematic eye examinations, identifying common eye pathologies and a knowledge quiz. As part of their clinical training, 15 fourth-year medical students were surveyed for their views on this teaching approach. The Technology Acceptance Model was used to evaluate perceived usefulness and ease of use. Data were also collected on the usability of the app, together with the students' written comments about it. Users agreed that the teaching approach improved their understanding of ophthalmoscopy (n = 14), their ability to identify landmarks in the eye (n = 14) and their ability to recognise abnormalities (n = 15). They found the app easy to use (n = 15), the teaching approach informative (n = 13) and that it would increase students' confidence when performing these tasks in future (n = 15). Performing eye examinations is an important clinical skill DISCUSSION: The evaluation showed that a VR app can successfully simulate the processes involved in performing eye examinations. The app was highly rated for all elements of perceived usefulness, ease of use and usability. Medical students stated that they would like to be taught other medical skills in this way in future. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

  10. Environmental Technology Verification: Test Report of Mobile Source Emission Control Devices--Johnson Matthey PCRT2 1000, Version 2, Filter + Diesel Oxidation Catalyst

    Science.gov (United States)

    The Johnson Matthey PCRT2 1000, v.2 system is a partial continuously regenerating technology (PCRT) system that consists of a flow-through partial filter combined with a DOC. The system is designed for low temperature exhaust resulting from intermittent loads from medium and heav...

  11. Environmental Technology Verification Report and Statement for Baghouse Filtration Products, W. L. Gore & Associates, Inc. 5117 High Durability PPS Laminate Filtration Media (Tested March-April 2012)

    Science.gov (United States)

    Baghouses are air pollution control devices used to control particulate emissions from stationary sources and are among the technologies evaluated by the APCT Center. Baghouses and their accompanying filter media have long been one of the leading particulate control techniques fo...

  12. The Professional Socialization of Certified Athletic Trainers in the National Collegiate Athletic Association Division I Context

    OpenAIRE

    Pitney, William A.; Ilsley, Paul; Rintala, Jan

    2002-01-01

    Objective: To describe the professional socialization process of certified athletic trainers (ATCs) in National Collegiate Athletic Association (NCAA) Division I to guide athletic training education and professional development.

  13. Key attributes of a modern surgical trainer: perspectives from consultants and trainees in the United kingdom.

    Science.gov (United States)

    Nisar, Pasha J; Scott, Humphrey J

    2011-01-01

    This study identifies key attributes of a modern surgical trainer as defined by individual trainees and consultant training faculty members. Using a collaborative inquiry process, we conducted focus groups and semistructured interviews with 32 trainees and 10 consultant trainers in general surgery. This study was undertaken in a single postgraduate deanery in the United Kingdom. Key trainer attributes were identified and categorized into themes. Key attributes identified by core trainees (CTs) were enthusiasm, giving feedback, setting targets, completing online assessments, and inspiring trainees. From specialty trainees (STs), key attributes were leading in difficult situations, patience, ensuring trainees perform cases, inspiring trainees, and being a role model. Key attributes from consultants were engaging other trainers, awareness of individual needs, ensuring trainees perform cases, discussing problems sympathetically, and patience. Effective communication was the principal trainer theme for CTs and STs identified the principal theme of leadership. These themes were emphasized also by trainers. Trainees and trainers have different beliefs on the attributes a good surgical trainer should possess. These findings may be used to promote understanding between trainees and trainers of the expectations and difficulties faced by surgical consultants. Copyright © 2011 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  14. Is flow verification necessary

    International Nuclear Information System (INIS)

    Beetle, T.M.

    1986-01-01

    Safeguards test statistics are used in an attempt to detect diversion of special nuclear material. Under assumptions concerning possible manipulation (falsification) of safeguards accounting data, the effects on the statistics due to diversion and data manipulation are described algebraically. A comprehensive set of statistics that is capable of detecting any diversion of material is defined in terms of the algebraic properties of the effects. When the assumptions exclude collusion between persons in two material balance areas, then three sets of accounting statistics are shown to be comprehensive. Two of the sets contain widely known accountancy statistics. One of them does not require physical flow verification - comparisons of operator and inspector data for receipts and shipments. The third set contains a single statistic which does not require physical flow verification. In addition to not requiring technically difficult and expensive flow verification, this single statistic has several advantages over other comprehensive sets of statistics. This algebraic approach as an alternative to flow verification for safeguards accountancy is discussed in this paper

  15. Integrated Java Bytecode Verification

    DEFF Research Database (Denmark)

    Gal, Andreas; Probst, Christian; Franz, Michael

    2005-01-01

    Existing Java verifiers perform an iterative data-flow analysis to discover the unambiguous type of values stored on the stack or in registers. Our novel verification algorithm uses abstract interpretation to obtain definition/use information for each register and stack location in the program...

  16. MARATHON Verification (MARV)

    Science.gov (United States)

    2017-08-01

    the verification and "lessons learned " from the semantic and technical issues we discovered as we implemented the approach. 15. SUBJECT TERMS...any programming language at use at CAA for modeling or other data analysis applications, to include R, Python , Scheme, Common Lisp, Julia, Mathematica

  17. Seismic verification of underground explosions

    International Nuclear Information System (INIS)

    Glenn, L.A.

    1985-06-01

    The first nuclear test agreement, the test moratorium, was made in 1958 and lasted until the Soviet Union unilaterally resumed testing in the atmosphere in 1961. It was followed by the Limited Test Ban Treaty of 1963, which prohibited nuclear tests in the atmosphere, in outer space, and underwater. In 1974 the Threshold Test Ban Treaty (TTBT) was signed, limiting underground tests after March 1976 to a maximum yield of 250 kt. The TTBT was followed by a treaty limiting peaceful nuclear explosions and both the United States and the Soviet Union claim to be abiding by the 150-kt yield limit. A comprehensive test ban treaty (CTBT), prohibiting all testing of nuclear weapons, has also been discussed. However, a verifiable CTBT is a contradiction in terms. No monitoring technology can offer absolute assurance that very-low-yield illicit explosions have not occurred. The verification process, evasion opportunities, and cavity decoupling are discussed in this paper

  18. Accuracy Verification of Magnetic Resonance Imaging (MRI Technology for Lower-Limb Prosthetic Research: Utilising Animal Soft Tissue Specimen and Common Socket Casting Materials

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Safari

    2012-01-01

    Full Text Available Lower limb prosthetic socket shape and volume consistency can be quantified using MRI technology. Additionally, MRI images of the residual limb could be used as an input data for CAD-CAM technology and finite element studies. However, the accuracy of MRI when socket casting materials are used has to be defined. A number of six, 46 mm thick, cross-sections of an animal leg were used. Three specimens were wrapped with Plaster of Paris (POP and the other three with commercially available silicone interface liner. Data was obtained by utilising MRI technology and then the segmented images compared to corresponding calliper measurement, photographic imaging, and water suspension techniques. The MRI measurement results were strongly correlated with actual diameter, surface area, and volume measurements. The results show that the selected scanning parameters and the semiautomatic segmentation method are adequate enough, considering the limit of clinical meaningful shape and volume fluctuation, for residual limb volume and the cross-sectional surface area measurements.

  19. Accuracy verification of magnetic resonance imaging (MRI) technology for lower-limb prosthetic research: utilising animal soft tissue specimen and common socket casting materials.

    Science.gov (United States)

    Safari, Mohammad Reza; Rowe, Philip; Buis, Arjan

    2012-01-01

    Lower limb prosthetic socket shape and volume consistency can be quantified using MRI technology. Additionally, MRI images of the residual limb could be used as an input data for CAD-CAM technology and finite element studies. However, the accuracy of MRI when socket casting materials are used has to be defined. A number of six, 46 mm thick, cross-sections of an animal leg were used. Three specimens were wrapped with Plaster of Paris (POP) and the other three with commercially available silicone interface liner. Data was obtained by utilising MRI technology and then the segmented images compared to corresponding calliper measurement, photographic imaging, and water suspension techniques. The MRI measurement results were strongly correlated with actual diameter, surface area, and volume measurements. The results show that the selected scanning parameters and the semiautomatic segmentation method are adequate enough, considering the limit of clinical meaningful shape and volume fluctuation, for residual limb volume and the cross-sectional surface area measurements.

  20. Key Nuclear Verification Priorities: Safeguards and Beyond

    International Nuclear Information System (INIS)

    Carlson, J.

    2010-01-01

    In addressing nuclear verification priorities, we should look beyond the current safeguards system. Non-proliferation, which the safeguards system underpins, is not an end in itself, but an essential condition for achieving and maintaining nuclear disarmament. Effective safeguards are essential for advancing disarmament, and safeguards issues, approaches and techniques are directly relevant to the development of future verification missions. The extent to which safeguards challenges are successfully addressed - or otherwise - will impact not only on confidence in the safeguards system, but on the effectiveness of, and confidence in, disarmament verification. To identify the key nuclear verification priorities, we need to consider the objectives of verification, and the challenges to achieving these. The strategic objective of IAEA safeguards might be expressed as: To support the global nuclear non-proliferation regime by: - Providing credible assurance that states are honouring their safeguards commitments - thereby removing a potential motivation to proliferate; and - Early detection of misuse of nuclear material and technology - thereby deterring proliferation by the risk of early detection, enabling timely intervention by the international community. Or to summarise - confidence-building, detection capability, and deterrence. These will also be essential objectives for future verification missions. The challenges to achieving these involve a mix of political, technical and institutional dimensions. Confidence is largely a political matter, reflecting the qualitative judgment of governments. Clearly assessments of detection capability and deterrence have a major impact on confidence. Detection capability is largely thought of as 'technical', but also involves issues of legal authority, as well as institutional issues. Deterrence has both political and institutional aspects - including judgments on risk of detection and risk of enforcement action being taken. The

  1. Key Nuclear Verification Priorities - Safeguards and Beyond

    International Nuclear Information System (INIS)

    Carlson, J.

    2010-01-01

    In addressing nuclear verification priorities, we should look beyond the current safeguards system. Non-proliferation, which the safeguards system underpins, is not an end in itself, but an essential condition for achieving and maintaining nuclear disarmament. Effective safeguards are essential for advancing disarmament, and safeguards issues, approaches and techniques are directly relevant to the development of future verification missions. The extent to which safeguards challenges are successfully addressed - or otherwise - will impact not only on confidence in the safeguards system, but on the effectiveness of, and confidence in, disarmament verification. To identify the key nuclear verification priorities, we need to consider the objectives of verification, and the challenges to achieving these. The strategic objective of IAEA safeguards might be expressed as: To support the global nuclear non-proliferation regime by: - Providing credible assurance that states are honouring their safeguards commitments - thereby removing a potential motivation to proliferate; and - Early detection of misuse of nuclear material and technology - thereby deterring proliferation by the risk of early detection, enabling timely intervention by the international community. Or to summarise - confidence-building, detection capability, and deterrence. These will also be essential objectives for future verification missions. The challenges to achieving these involve a mix of political, technical and institutional dimensions. Confidence is largely a political matter, reflecting the qualitative judgment of governments. Clearly assessments of detection capability and deterrence have a major impact on confidence. Detection capability is largely thought of as 'technical', but also involves issues of legal authority, as well as institutional issues. Deterrence has both political and institutional aspects - including judgments on risk of detection and risk of enforcement action being taken. The

  2. SOFT POWER: TRAINING OF VET TEACHERS AND TRAINERS (RESULTS OF THE RUSSIAN-GERMAN COOPERATION

    Directory of Open Access Journals (Sweden)

    E. Yu. Esenina

    2017-01-01

    compared to AEVO (the regulatory base defining federal requirements to instructors-teachers in Germany. Scientific novelty consists in justification of modern model of training for VET teachers and trainers. The model provides implementation of variable modular curricula of additional vocational education for VET teachers and trainers. The most fruitful Russian and German experience is integrated; the international requirements and advanced technologies are considered when creating the model of training. Practical significance. Except the model of training for VET teachers and trainers, the education guidance «Methods of Vocational Education» is worked out. The education guidance summary is outlined in the present article.

  3. Integrated testing and verification system for research flight software

    Science.gov (United States)

    Taylor, R. N.

    1979-01-01

    The MUST (Multipurpose User-oriented Software Technology) program is being developed to cut the cost of producing research flight software through a system of software support tools. An integrated verification and testing capability was designed as part of MUST. Documentation, verification and test options are provided with special attention on real-time, multiprocessing issues. The needs of the entire software production cycle were considered, with effective management and reduced lifecycle costs as foremost goals.

  4. Assessment of unsaturated zone transport for shallow land burial of radioactive waste: summary report of technology needs, model verification, and measurement efforts (FY 1978 to FY 1983)

    International Nuclear Information System (INIS)

    Jones, T.L.; Gee, G.W.

    1984-01-01

    Two main topics are addressed in this report. The first topic relates to the assessment process for shallow land burial site design. This overview includes basic descriptions of water balance, transport processes and technology needs for waste management at an arid (dry) site. The second topic deals with specific results of research activities at PNL related to water and radionuclide transport under arid, shallow land burial conditions. Technology needs at arid-zone (dry) sites are summarized and unique features of radionuclide disposal at dry sites are explained. The report emphasizes the need to understand the interaction between climate, soil, plants, engineered barriers, and buried waste in order to evaluate performance of a waste disposal system at a dry site. Water balance data, collected since FY 1978 at the Buried Waste Test Facility (BWTF) at Hanford, are used to illustrate the influence of climate variables (rainfall distribution patterns and evaporative conditions) on soil water storage and drainage at an arid site. For dry site conditions, with no vegetation and coarse soil, significant deep drainage was measured. Deep drainage below the root zone was also measured at a grass-covered site on the Hanford site after early spring rains, which emphasizes the need to carefully monitor site water balances even at arid (dry) sites. The monitoring technology, water balance, and radionuclide transport at arid sites are discussed, and the use of neutron probes, electrical resistance units, tensiometers, and psychrometers are explained, and examples are given on their applications in arid-site monitoring. Measurements of water flow and radionuclide transport coefficients needed to describe movement in unsaturated soils are documented. 40 references, 21 figures, 5 tables

  5. TEST/QA PLAN FOR THE VERIFICATION TESTING OF ALTERNATIVES OR REFORMULATED LIQUID FUELS, FUEL ADDITIVES, FUEL EMULSONS, AND LUBRICANTS FOR HIGHWAY AND NONROAD USE HEAVY DUTY DIESEL ENGINES AND LIGHT DUTY GASOLINE ENGINES AND VEHICLES

    Science.gov (United States)

    The U.S. Environmental Protection Agency established the Environmental Technology Verification Program to accelerate the development and commercialization of improved environmental technology through third party verification and reporting of product performance. Research Triangl...

  6. Distorted Fingerprint Verification System

    Directory of Open Access Journals (Sweden)

    Divya KARTHIKAESHWARAN

    2011-01-01

    Full Text Available Fingerprint verification is one of the most reliable personal identification methods. Fingerprint matching is affected by non-linear distortion introduced in fingerprint impression during the image acquisition process. This non-linear deformation changes both the position and orientation of minutiae. The proposed system operates in three stages: alignment based fingerprint matching, fuzzy clustering and classifier framework. First, an enhanced input fingerprint image has been aligned with the template fingerprint image and matching score is computed. To improve the performance of the system, a fuzzy clustering based on distance and density has been used to cluster the feature set obtained from the fingerprint matcher. Finally a classifier framework has been developed and found that cost sensitive classifier produces better results. The system has been evaluated on fingerprint database and the experimental result shows that system produces a verification rate of 96%. This system plays an important role in forensic and civilian applications.

  7. Supporting teachers and trainers for successful reforms and quality of VET

    DEFF Research Database (Denmark)

    Kruse, Katrine; Gottlieb, Susanne; Andersen, Ole Dibbern

    This article presents how teachers and trainers in the Danish vocational education and training (VET) system are prepared for their work as professionals in an educational system undergoing rapid changes.......This article presents how teachers and trainers in the Danish vocational education and training (VET) system are prepared for their work as professionals in an educational system undergoing rapid changes....

  8. Concussion Assessment in California Community College Football: Athletic Trainers' Strides toward a Safer Return to Play

    Science.gov (United States)

    Chinn, Nancy Resendes

    2010-01-01

    The purpose of this mixed method study was to compare current practices of athletic trainers in the management of concussion in football at California Community Colleges (CCC) with the concussion management guidelines set forth by the National Athletic Trainers Association (NATA). The study also set out to gain understanding of why some athletic…

  9. The attributes of the clinical trainer as a role model: a systematic review

    NARCIS (Netherlands)

    Jochemsen-van der Leeuw, H. G. A. Ria; van Dijk, Nynke; van Etten-Jamaludin, Faridi S.; Wieringa-de Waard, Margreet

    2013-01-01

    Medical trainees (interns and residents) and their clinical trainers need to be aware of the differences between positive and negative role modeling to ensure that trainees imitate and that trainers demonstrate the professional behavior required to provide high-quality patient care. The authors

  10. Guide for Trainers. Interdisciplinary Team Training and Humanistic Patient Care for Hospices. Monograph 2.

    Science.gov (United States)

    Wilson, Dottie C.; Grady, Kathleen A.

    This monograph, the second in a series of five, provides information for trainers on interdisciplinary team training and humanistic patient care in hospices. Designed to help outside trainers who may be invited by a hospice to conduct its training, the materials help instructors to understand the nature of hospices, to determine whether or not the…

  11. Factors influencing the EBM behaviour of GP trainers: a mixed method study

    NARCIS (Netherlands)

    te Pas, E.; van Dijk, N.; Bartelink, M. E. L.; Wieringa-de Waard, M.

    2013-01-01

    General practitioner (GP) trainees state that their trainers are not consistent in using evidence-based medicine (EBM) or are even dismissive of it. As trainers are important role models in the Dutch GP training system this could have a large influence on the EBM training of GP trainees. To

  12. Ethical Issues of ICT Use by Teacher Trainers: Use of E-Books in Academic Settings

    Science.gov (United States)

    Kilickaya, Ferit; Krajka, Jaroslaw

    2015-01-01

    In an attempt to address the issue of ethics in ICT use by university teacher trainers, the current study aimed to investigate academics' downloading and sharing e-books as well as the reasons that led them to be involved in this piracy. The participants included 140 teacher trainers working at faculties of education in Turkey, and a questionnaire…

  13. Realism of procedural task trainers in a pediatric emergency medicine procedures course.

    Science.gov (United States)

    Shefrin, Allan; Khazei, Afshin; Cheng, Adam

    2015-01-01

    Pediatric emergency medicine (PEM) physicians have minimal experience in life saving procedures and have turned to task trainers to learn these skills. Realism of these models is an important consideration that has received little study. PEM physicians and trainees participated in a day long procedural training course that utilized commercially available and homemade task trainers to teach pericardiocentesis, chest tube insertion, cricothyroidotomy and central line insertion. Participants rated the realism of the task trainers as part of a post-course survey. The homemade task trainers received variable realism ratings, with 91% of participants rating the pork rib chest tube model as realistic, 82% rating the gelatin pericardiocentesis mold as realistic and 36% rating the ventilator tubing cricothyroidotomy model as realistic. Commercial trainers also received variable ratings, with 45% rating the chest drain and pericardiocentesis simulator as realistic, 74% rating the crichotracheotomy trainer as realistic and 80% rating the central line insertion trainer as realistic. Task training models utilized in our course received variable realism ratings. When deciding what type of task trainer to use future courses should carefully consider the desired aspect of realism, and how it aligns with the procedural skill, balanced with cost considerations.

  14. Adaptive soft tissue deformation for a virtual reality surgical trainer.

    Science.gov (United States)

    Jerabkova, Lenka; Wolter, Timm P; Pallua, Norbert; Kuhlen, Torsten

    2005-01-01

    Real time tissue deformation is an important aspect of interactive virtual reality (VR) environments such as medical trainers. Most approaches in deformable modelling use a fixed space discretization. A surgical trainer requires high plausibility of the deformations especially in the area close to the instrument. As the area of intervention is not known a priori, adaptive techniques have to be applied. We present an approach for real time deformation of soft tissue based on a regular FEM mesh of cube elements as opposed to a mesh of tetrahedral elements used by the majority of soft tissue simulators. A regular mesh structure simplifies the local refinement operation as the elements topology and stiffness are known implicitly. We propose an octree-based adaptive multiresolution extension of our basic approach. The volumetric representation of the deformed object is created automatically from medical images or by voxelization of a surface model. The resolution of the volumetric representation is independent of the surface geometry resolution. The surface is deformed according to the simulation performed on the underlying volumetric mesh.

  15. Methods of Software Verification

    Directory of Open Access Journals (Sweden)

    R. E. Gurin

    2015-01-01

    Full Text Available This article is devoted to the problem of software verification (SW. Methods of software verification designed to check the software for compliance with the stated requirements such as correctness, system security and system adaptability to small changes in the environment, portability and compatibility, etc. These are various methods both by the operation process and by the way of achieving result. The article describes the static and dynamic methods of software verification and paid attention to the method of symbolic execution. In its review of static analysis are discussed and described the deductive method, and methods for testing the model. A relevant issue of the pros and cons of a particular method is emphasized. The article considers classification of test techniques for each method. In this paper we present and analyze the characteristics and mechanisms of the static analysis of dependencies, as well as their views, which can reduce the number of false positives in situations where the current state of the program combines two or more states obtained both in different paths of execution and in working with multiple object values. Dependences connect various types of software objects: single variables, the elements of composite variables (structure fields, array elements, the size of the heap areas, the length of lines, the number of initialized array elements in the verification code using static methods. The article pays attention to the identification of dependencies within the framework of the abstract interpretation, as well as gives an overview and analysis of the inference tools.Methods of dynamic analysis such as testing, monitoring and profiling are presented and analyzed. Also some kinds of tools are considered which can be applied to the software when using the methods of dynamic analysis. Based on the work a conclusion is drawn, which describes the most relevant problems of analysis techniques, methods of their solutions and

  16. RESRAD-BUILD verification

    International Nuclear Information System (INIS)

    Kamboj, S.; Yu, C.; Biwer, B. M.; Klett, T.

    2002-01-01

    The results generated by the RESRAD-BUILD code (version 3.0) were verified with hand or spreadsheet calculations using equations given in the RESRAD-BUILD manual for different pathways. For verification purposes, different radionuclides--H-3, C-14, Na-22, Al-26, Cl-36, Mn-54, Co-60, Au-195, Ra-226, Ra-228, Th-228, and U-238--were chosen to test all pathways and models. Tritium, Ra-226, and Th-228 were chosen because of the special tritium and radon models in the RESRAD-BUILD code. Other radionuclides were selected to represent a spectrum of radiation types and energies. Verification of the RESRAD-BUILD code was conducted with an initial check of all the input parameters for correctness against their original source documents. Verification of the calculations was performed external to the RESRAD-BUILD code with Microsoft Excel to verify all the major portions of the code. In some cases, RESRAD-BUILD results were compared with those of external codes, such as MCNP (Monte Carlo N-particle) and RESRAD. The verification was conducted on a step-by-step basis and used different test cases as templates. The following types of calculations were investigated: (1) source injection rate, (2) air concentration in the room, (3) air particulate deposition, (4) radon pathway model, (5) tritium model for volume source, (6) external exposure model, (7) different pathway doses, and (8) time dependence of dose. Some minor errors were identified in version 3.0; these errors have been corrected in later versions of the code. Some possible improvements in the code were also identified

  17. Comments for A Conference on Verification in the 21st Century

    Energy Technology Data Exchange (ETDEWEB)

    Doyle, James E. [Los Alamos National Laboratory

    2012-06-12

    The author offers 5 points for the discussion of Verification and Technology: (1) Experience with the implementation of arms limitation and arms reduction agreements confirms that technology alone has never been relied upon to provide effective verification. (2) The historical practice of verification of arms control treaties between Cold War rivals may constrain the cooperative and innovative use of technology for transparency, veification and confidence building in the future. (3) An area that has been identified by many, including the US State Department and NNSA as being rich for exploration for potential uses of technology for transparency and verification is information and communications technology (ICT). This includes social media, crowd-sourcing, the internet of things, and the concept of societal verification, but there are issues. (4) On the issue of the extent to which verification technologies are keeping pace with the demands of future protocols and agrements I think the more direct question is ''are they effective in supporting the objectives of the treaty or agreement?'' In this regard it is important to acknowledge that there is a verification grand challenge at our doorstep. That is ''how does one verify limitations on nuclear warheads in national stockpiles?'' (5) Finally, while recognizing the daunting political and security challenges of such an approach, multilateral engagement and cooperation at the conceptual and technical levels provides benefits for addressing future verification challenges.

  18. Rules of Engagement: The Joint Influence of Trainer Expressiveness and Trainee Experiential Learning Style on Engagement and Training Transfer

    Science.gov (United States)

    Rangel, Bertha; Chung, Wonjoon; Harris, T. Brad; Carpenter, Nichelle C.; Chiaburu, Dan S.; Moore, Jenna L.

    2015-01-01

    We investigated the joint effect of trainer expressiveness and trainee experiential learning style on training transfer intentions. Extending prior research where trainer expressiveness has been established as a positive predictor of transfer, we show that trainer expressiveness is more impactful for trainees with high (vs. low) experiential…

  19. Systematic study of source mask optimization and verification flows

    Science.gov (United States)

    Ben, Yu; Latypov, Azat; Chua, Gek Soon; Zou, Yi

    2012-06-01

    Source mask optimization (SMO) emerged as powerful resolution enhancement technique (RET) for advanced technology nodes. However, there is a plethora of flow and verification metrics in the field, confounding the end user of the technique. Systemic study of different flows and the possible unification thereof is missing. This contribution is intended to reveal the pros and cons of different SMO approaches and verification metrics, understand the commonality and difference, and provide a generic guideline for RET selection via SMO. The paper discusses 3 different type of variations commonly arise in SMO, namely pattern preparation & selection, availability of relevant OPC recipe for freeform source and finally the metrics used in source verification. Several pattern selection algorithms are compared and advantages of systematic pattern selection algorithms are discussed. In the absence of a full resist model for SMO, alternative SMO flow without full resist model is reviewed. Preferred verification flow with quality metrics of DOF and MEEF is examined.

  20. Quantum money with classical verification

    International Nuclear Information System (INIS)

    Gavinsky, Dmitry

    2014-01-01

    We propose and construct a quantum money scheme that allows verification through classical communication with a bank. This is the first demonstration that a secure quantum money scheme exists that does not require quantum communication for coin verification. Our scheme is secure against adaptive adversaries - this property is not directly related to the possibility of classical verification, nevertheless none of the earlier quantum money constructions is known to possess it

  1. The virtual reality simulator dV-Trainer(®) is a valid assessment tool for robotic surgical skills.

    Science.gov (United States)

    Perrenot, Cyril; Perez, Manuela; Tran, Nguyen; Jehl, Jean-Philippe; Felblinger, Jacques; Bresler, Laurent; Hubert, Jacques

    2012-09-01

    Exponential development of minimally invasive techniques, such as robotic-assisted devices, raises the question of how to assess robotic surgery skills. Early development of virtual simulators has provided efficient tools for laparoscopic skills certification based on objective scoring, high availability, and lower cost. However, similar evaluation is lacking for robotic training. The purpose of this study was to assess several criteria, such as reliability, face, content, construct, and concurrent validity of a new virtual robotic surgery simulator. This prospective study was conducted from December 2009 to April 2010 using three simulators dV-Trainers(®) (MIMIC Technologies(®)) and one Da Vinci S(®) (Intuitive Surgical(®)). Seventy-five subjects, divided into five groups according to their initial surgical training, were evaluated based on five representative exercises of robotic specific skills: 3D perception, clutching, visual force feedback, EndoWrist(®) manipulation, and camera control. Analysis was extracted from (1) questionnaires (realism and interest), (2) automatically generated data from simulators, and (3) subjective scoring by two experts of depersonalized videos of similar exercises with robot. Face and content validity were generally considered high (77 %). Five levels of ability were clearly identified by the simulator (ANOVA; p = 0.0024). There was a strong correlation between automatic data from dV-Trainer and subjective evaluation with robot (r = 0.822). Reliability of scoring was high (r = 0.851). The most relevant criteria were time and economy of motion. The most relevant exercises were Pick and Place and Ring and Rail. The dV-Trainer(®) simulator proves to be a valid tool to assess basic skills of robotic surgery.

  2. International monitoring of technology

    International Nuclear Information System (INIS)

    Fischer, W.; Stein, G.

    1990-01-01

    The monitoring of the civilian nuclear energy sector has been effected successfully by IAEA and EURATOM and has contributed to a reduction of fears within the communities of nations. Certainly, it will not be possible to subject the whole world and whole spectrum of technology to monitoring. However, the nations should be enabled to reduce their greatest fears concerning an abuse and a misuse of technology by verification, and to check the compliance with such international agreements which regulate the application of a number of technologies. There are some (as yet rudimentary) approaches to an international verification in the field of environmental protection and resource policies. Nuclear energy with its sophisticated verification procedure has taken one great step ahead of the other fields. The strengths and weaknesses of its verification regime should be learned from when filling the virgin fields of international technology monitoring and its instrument, i.e. international verification. (orig./HSCH) [de

  3. A Practitioners Perspective on Verification

    Science.gov (United States)

    Steenburgh, R. A.

    2017-12-01

    NOAAs Space Weather Prediction Center offers a wide range of products and services to meet the needs of an equally wide range of customers. A robust verification program is essential to the informed use of model guidance and other tools by both forecasters and end users alike. In this talk, we present current SWPC practices and results, and examine emerging requirements and potential approaches to satisfy them. We explore the varying verification needs of forecasters and end users, as well as the role of subjective and objective verification. Finally, we describe a vehicle used in the meteorological community to unify approaches to model verification and facilitate intercomparison.

  4. Scalable Techniques for Formal Verification

    CERN Document Server

    Ray, Sandip

    2010-01-01

    This book presents state-of-the-art approaches to formal verification techniques to seamlessly integrate different formal verification methods within a single logical foundation. It should benefit researchers and practitioners looking to get a broad overview of the spectrum of formal verification techniques, as well as approaches to combining such techniques within a single framework. Coverage includes a range of case studies showing how such combination is fruitful in developing a scalable verification methodology for industrial designs. This book outlines both theoretical and practical issue

  5. Systems Approach to Arms Control Verification

    Energy Technology Data Exchange (ETDEWEB)

    Allen, K; Neimeyer, I; Listner, C; Stein, G; Chen, C; Dreicer, M

    2015-05-15

    Using the decades of experience of developing concepts and technologies for verifying bilateral and multilateral arms control agreements, a broad conceptual systems approach is being developed that takes into account varying levels of information and risk. The IAEA has already demonstrated the applicability of a systems approach by implementing safeguards at the State level, with acquisition path analysis as the key element. In order to test whether such an approach could also be implemented for arms control verification, an exercise was conducted in November 2014 at the JRC ITU Ispra. Based on the scenario of a hypothetical treaty between two model nuclear weapons states aimed at capping their nuclear arsenals at existing levels, the goal of this exercise was to explore how to use acquisition path analysis in an arms control context. Our contribution will present the scenario, objectives and results of this exercise, and attempt to define future workshops aimed at further developing verification measures that will deter or detect treaty violations.

  6. CTBT integrated verification system evaluation model supplement

    Energy Technology Data Exchange (ETDEWEB)

    EDENBURN,MICHAEL W.; BUNTING,MARCUS; PAYNE JR.,ARTHUR C.; TROST,LAWRENCE C.

    2000-03-02

    Sandia National Laboratories has developed a computer based model called IVSEM (Integrated Verification System Evaluation Model) to estimate the performance of a nuclear detonation monitoring system. The IVSEM project was initiated in June 1994, by Sandia's Monitoring Systems and Technology Center and has been funded by the U.S. Department of Energy's Office of Nonproliferation and National Security (DOE/NN). IVSEM is a simple, ''top-level,'' modeling tool which estimates the performance of a Comprehensive Nuclear Test Ban Treaty (CTBT) monitoring system and can help explore the impact of various sensor system concepts and technology advancements on CTBT monitoring. One of IVSEM's unique features is that it integrates results from the various CTBT sensor technologies (seismic, in sound, radionuclide, and hydroacoustic) and allows the user to investigate synergy among the technologies. Specifically, IVSEM estimates the detection effectiveness (probability of detection), location accuracy, and identification capability of the integrated system and of each technology subsystem individually. The model attempts to accurately estimate the monitoring system's performance at medium interfaces (air-land, air-water) and for some evasive testing methods such as seismic decoupling. The original IVSEM report, CTBT Integrated Verification System Evaluation Model, SAND97-25 18, described version 1.2 of IVSEM. This report describes the changes made to IVSEM version 1.2 and the addition of identification capability estimates that have been incorporated into IVSEM version 2.0.

  7. CTBT integrated verification system evaluation model supplement

    International Nuclear Information System (INIS)

    EDENBURN, MICHAEL W.; BUNTING, MARCUS; PAYNE, ARTHUR C. JR.; TROST, LAWRENCE C.

    2000-01-01

    Sandia National Laboratories has developed a computer based model called IVSEM (Integrated Verification System Evaluation Model) to estimate the performance of a nuclear detonation monitoring system. The IVSEM project was initiated in June 1994, by Sandia's Monitoring Systems and Technology Center and has been funded by the U.S. Department of Energy's Office of Nonproliferation and National Security (DOE/NN). IVSEM is a simple, ''top-level,'' modeling tool which estimates the performance of a Comprehensive Nuclear Test Ban Treaty (CTBT) monitoring system and can help explore the impact of various sensor system concepts and technology advancements on CTBT monitoring. One of IVSEM's unique features is that it integrates results from the various CTBT sensor technologies (seismic, in sound, radionuclide, and hydroacoustic) and allows the user to investigate synergy among the technologies. Specifically, IVSEM estimates the detection effectiveness (probability of detection), location accuracy, and identification capability of the integrated system and of each technology subsystem individually. The model attempts to accurately estimate the monitoring system's performance at medium interfaces (air-land, air-water) and for some evasive testing methods such as seismic decoupling. The original IVSEM report, CTBT Integrated Verification System Evaluation Model, SAND97-25 18, described version 1.2 of IVSEM. This report describes the changes made to IVSEM version 1.2 and the addition of identification capability estimates that have been incorporated into IVSEM version 2.0

  8. National Athletic Trainers' Association Position Statement: Anabolic-Androgenic Steroids

    Science.gov (United States)

    Kersey, Robert D.; Elliot, Diane L.; Goldberg, Linn; Kanayama, Gen; Leone, James E.; Pavlovich, Mike; Pope, Harrison G.

    2012-01-01

    This NATA position statement was developed by the NATA Research & Education Foundation. Objective This manuscript summarizes the best available scholarly evidence related to anabolic-androgenic steroids (AAS) as a reference for health care professionals, including athletic trainers, educators, and interested others. Background Health care professionals associated with sports or exercise should understand and be prepared to educate others about AAS. These synthetic, testosterone-based derivatives are widely abused by athletes and nonathletes to gain athletic performance advantages, develop their physiques, and improve their body image. Although AAS can be ergogenic, their abuse may lead to numerous negative health effects. Recommendations Abusers of AAS often rely on questionable information sources. Sports medicine professionals can therefore serve an important role by providing accurate, reliable information. The recommendations provide health care professionals with a current and accurate synopsis of the AAS-related research. PMID:23068595

  9. Therapists, Trainers, and Acupuncturists: Focused Review for the Orthopedic Surgeon.

    Science.gov (United States)

    Domes, Christopher M; Kruger, Cori L

    2015-12-01

    Effective treatment of orthopedic injuries requires a multidisciplinary team, including physical and occupational therapists, athletic trainers, massage therapists, and acupuncturists. Orthopedic surgeons commonly encounter these practitioners but may not be familiar with the training, credentialing, and most importantly, the appropriate use of members of this team. There are general similarities in practice locations as well as types of symptoms addressed by the providers discussed, which include the treatment of physical pain, evaluation and treatment of physical impairment, and some facilitation of adaptation to the limitations caused by injuries. Across the 5 types of providers discussed there are widely varying training and licensing requirements, specializations, and continuing education requirements to maintain licensure. This article provides a focused review of these members of the multidisciplinary team and highlights the current American Academy of Orthopaedic Surgeons recommendations for the use of occupational and physical therapists for orthopedic conditions, including hip fractures, total hip arthroplasty, and anterior cruciate ligament reconstruction. Copyright 2015, SLACK Incorporated.

  10. High-level verification

    CERN Document Server

    Lerner, Sorin; Kundu, Sudipta

    2011-01-01

    Given the growing size and heterogeneity of Systems on Chip (SOC), the design process from initial specification to chip fabrication has become increasingly complex. This growing complexity provides incentive for designers to use high-level languages such as C, SystemC, and SystemVerilog for system-level design. While a major goal of these high-level languages is to enable verification at a higher level of abstraction, allowing early exploration of system-level designs, the focus so far for validation purposes has been on traditional testing techniques such as random testing and scenario-based

  11. Parking Space Verification

    DEFF Research Database (Denmark)

    Høg Peter Jensen, Troels; Thomsen Schmidt, Helge; Dyremose Bodin, Niels

    2018-01-01

    With the number of privately owned cars increasing, the issue of locating an available parking space becomes apparant. This paper deals with the verification of vacant parking spaces, by using a vision based system looking over parking areas. In particular the paper proposes a binary classifier...... system, based on a Convolutional Neural Network, that is capable of determining if a parking space is occupied or not. A benchmark database consisting of images captured from different parking areas, under different weather and illumination conditions, has been used to train and test the system...

  12. Survey on Offline Finger Print Verification System

    NARCIS (Netherlands)

    Suman, R.; Kaur, R.

    2012-01-01

    The fingerprint verification, means where "verification" implies a user matching a fingerprint against a single fingerprint associated with the identity that the user claims. Biometrics can be classified into two types Behavioral (signature verification, keystroke dynamics, etc.) And Physiological

  13. Inventory of present verification techniques. Viewpoint of EURATOM

    International Nuclear Information System (INIS)

    Kloeckner, W.; Eecken, D. Van der; Gmelin, W.

    1998-01-01

    Starting from the role of Euratom as an established regional safeguards system, an overview is given of verification techniques currently practised by Euratom. In the stage-light of a rapidly changing and complex international safeguards scene, Euratom considers it has an important role to play. Having in mind the possibilities created by accelerating modern technology, recommendations are given for an enhanced use of technological means in safeguards. The viewpoint of Euratom is that the majority of methodologies and techniques in place may very well be copied to or used for a cut-off verification system currently under discussion

  14. Robotics On-Board Trainer (ROBoT)

    Science.gov (United States)

    Johnson, Genevieve; Alexander, Greg

    2013-01-01

    ROBoT is an on-orbit version of the ground-based Dynamics Skills Trainer (DST) that astronauts use for training on a frequent basis. This software consists of two primary software groups. The first series of components is responsible for displaying the graphical scenes. The remaining components are responsible for simulating the Mobile Servicing System (MSS), the Japanese Experiment Module Remote Manipulator System (JEMRMS), and the H-II Transfer Vehicle (HTV) Free Flyer Robotics Operations. The MSS simulation software includes: Robotic Workstation (RWS) simulation, a simulation of the Space Station Remote Manipulator System (SSRMS), a simulation of the ISS Command and Control System (CCS), and a portion of the Portable Computer System (PCS) software necessary for MSS operations. These components all run under the CentOS4.5 Linux operating system. The JEMRMS simulation software includes real-time, HIL, dynamics, manipulator multi-body dynamics, and a moving object contact model with Tricks discrete time scheduling. The JEMRMS DST will be used as a functional proficiency and skills trainer for flight crews. The HTV Free Flyer Robotics Operations simulation software adds a functional simulation of HTV vehicle controllers, sensors, and data to the MSS simulation software. These components are intended to support HTV ISS visiting vehicle analysis and training. The scene generation software will use DOUG (Dynamic On-orbit Ubiquitous Graphics) to render the graphical scenes. DOUG runs on a laptop running the CentOS4.5 Linux operating system. DOUG is an Open GL-based 3D computer graphics rendering package. It uses pre-built three-dimensional models of on-orbit ISS and space shuttle systems elements, and provides realtime views of various station and shuttle configurations.

  15. A robotic wheelchair trainer: design overview and a feasibility study

    Directory of Open Access Journals (Sweden)

    Marchal-Crespo Laura

    2010-08-01

    Full Text Available Abstract Background Experiencing independent mobility is important for children with a severe movement disability, but learning to drive a powered wheelchair can be labor intensive, requiring hand-over-hand assistance from a skilled therapist. Methods To improve accessibility to training, we developed a robotic wheelchair trainer that steers itself along a course marked by a line on the floor using computer vision, haptically guiding the driver's hand in appropriate steering motions using a force feedback joystick, as the driver tries to catch a mobile robot in a game of "robot tag". This paper provides a detailed design description of the computer vision and control system. In addition, we present data from a pilot study in which we used the chair to teach children without motor impairment aged 4-9 (n = 22 to drive the wheelchair in a single training session, in order to verify that the wheelchair could enable learning by the non-impaired motor system, and to establish normative values of learning rates. Results and Discussion Training with haptic guidance from the robotic wheelchair trainer improved the steering ability of children without motor impairment significantly more than training without guidance. We also report the results of a case study with one 8-year-old child with a severe motor impairment due to cerebral palsy, who replicated the single-session training protocol that the non-disabled children participated in. This child also improved steering ability after training with guidance from the joystick by an amount even greater than the children without motor impairment. Conclusions The system not only provided a safe, fun context for automating driver's training, but also enhanced motor learning by the non-impaired motor system, presumably by demonstrating through intuitive movement and force of the joystick itself exemplary control to follow the course. The case study indicates that a child with a motor system impaired by CP can

  16. Sports Nutrition Knowledge, Perceptions, Resources, and Advice Given by Certified CrossFit Trainers

    Directory of Open Access Journals (Sweden)

    Cassie Maxwell

    2017-03-01

    Full Text Available Background: CrossFit is a large, growing force in the fitness community. Currently, Level 1 and 2 CrossFit certification classes do not include nutrition education. The purpose of this study was to identify sports nutrition knowledge, perceptions, resources, and advice given by Certified CrossFit Trainers. Methods: An online questionnaire that measured these four constructs was placed on a private Facebook community, open only to certified CrossFit trainers, for 10 days. Results: Complete surveys were obtained from 289 CrossFit trainers. The mean Sport Nutrition Knowledge (SNK score was 11.1 ± 2.1, equivalent to 65.3% ± 12.4% correct. The trainers perceived nutrition to be extremely important to athletic performance (9.4 ± 0.9 on a 10 point scale. Overall, the trainers graded their SNK higher than that of their CrossFit peers. The internet and CrossFit peers were the most frequently reported sources for nutrition information; Registered Dietitians were the least reported source. The Paleo and Zone diets were the most common dietary regimens recommended by CrossFit trainers. Results indicated a positive correlation between a CrossFit trainer’s self-reported hours of nutrition education and their SNK score (r = 0.17; p < 0.01. Conclusion: Nutrition education modules for Level 1 and 2 CrossFit trainers, developed with input from Board Certified Specialists in Sports Dietetics, are recommended.

  17. Acquisition of fundamental laparoscopic skills: is a box really as good as a virtual reality trainer?

    Science.gov (United States)

    Vitish-Sharma, P; Knowles, J; Patel, B

    2011-01-01

    Laparoscopic surgery requires working in a three-dimensional environment with a two-dimensional view. Skills such as depth perception, hand to eye co-ordination and bimanual manipulation are crucial to its efficacy. To compare the efficiency of training in laparoscopic skills on a VR simulator with a traditional box trainer. Twenty medical students were recruited. An initial training session on the relevant anatomy and steps of a laparoscopic cholecystectomy was given. Baseline skills were recorded using a pre-training laparoscopic cholecystectomy on the VR trainer. Parameters measured were: (1) total time taken (mins); (2) number of movements right and left instrument; (3) path length (cms) of right and left instrument was recorded. Ten students trained on a VR simulator, and ten on a box trainer, for three hours each. The box trainer group exercises were based on the Royal College of Surgeons core laparoscopic skills course, and the VR trainer exercises were based on the Simbionix LapMentor basic skills tasks. Following this both groups were reassessed by a laparoscopic cholecystectomy on the VR trainer. Both groups showed improvement in all measured parameters. A student T-test at 95% confidence interval showed no statistically significant difference between the two groups pre and post training. Both the VR and box trainer are effective in the acquisition of laparoscopic skills. Copyright © 2011 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

  18. Injury surveillance in community sport: Can we obtain valid data from sports trainers?

    Science.gov (United States)

    Ekegren, C L; Gabbe, B J; Finch, C F

    2015-06-01

    A lack of available injury data on community sports participants has hampered the development of informed preventive strategies for the broad-base of sports participation. In community sports settings, sports trainers or first-aiders are well-placed to carry out injury surveillance, but few studies have evaluated their ability to do so. The aim of this study was to investigate the reporting rate and completeness of sports trainers' injury records and agreement between sports trainers' and players' reports of injury in community Australian football. Throughout the football season, one sports trainer from each of four clubs recorded players' injuries. To validate these data, we collected self-reported injury data from players via short message service (SMS). In total, 210 discrete injuries were recorded for 139 players, 21% by sports trainers only, 59% by players via SMS only, and 21% by both. Completeness of injury records ranged from 95% to 100%. Agreement between sports trainers and players ranged from K = 0.32 (95% confidence interval: 0.27, 0.37) for date of return to football to K = 1.00 for activity when injured. Injury data collected by sports trainers may be of adequate quality for providing an understanding of the profile of injuries. However, data are likely to underestimate injury rates and should be interpreted with caution. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  19. POLITENESS STRATEGIES EMPLOYED BY THE TRAINERS IN ROOM DIVISION DEPARTMENT BAPEPAR NUSA DUA

    Directory of Open Access Journals (Sweden)

    I Gusti Ayu Vina Widiadnya Putri

    2017-05-01

    Full Text Available This article tries to analyze and discuss the politeness strategies employed by the trainers in room division department when they practice on the job training in the hotel. Politeness strategy was needed when the trainers serve the guest. This research was done by observation and interview with the trainer and the guest about their conversation. The analysis of politeness strategies that employed by the trainer focused on two discussions; (1 the kinds of politeness strategies used by trainer in room division department, and (2 the implications of politeness strategies used by trainer in room division department. This research used the theory from Brown & Levinson (1987 in his book entitled Politeness: Some Universals in Language Usages. The theory is supported by other theories that are considered relevant to the topic of discussion in this research. Based on the analysis, it was found that there were two kinds of politeness stratgies that employed by the trainer in room division department Bapepar Nusa Dua, they were positive face and negative face. Beside that, there are three implications by using politness strategies such as: respect behaviour, togheterness, and cooperative interaction.

  20. The Determination of Physical Activity Levels of Trainers in Kastamonu, Turkey

    Directory of Open Access Journals (Sweden)

    Mehmet Günay

    2015-03-01

    Full Text Available This study was carried out with the aim of determining the PA levels of the trainers working in Kastamonu in terms of gender and marital status variables. This study was applied to trainers from 15 different branches in the competitions organized by Kastamonu Directorate of Youth and Sports and Kastamonu Directorate of National Education. A total of 51 trainers participated in the study voluntarily; 19 of them were female; their mean age was 26.53±9.08 years, their mean height was 167.37±5.37 m and their mean weight was 60.37±7.30 kg. 32 of the trainers were male; their mean age was 35.41±8.10, their mean height was 179.69±6.25 m and their mean weight was 83.94±12.11 kg. Since the PA levels of the trainers working in the city center of Kastamonu were studied, the number of subjects was 51. In this study, in order to determine the physical activity level of the trainers, Physical Activity Evaluation Survey (PAAQ has been used. SPSS 15.0 was used to analyze the data in the dual comparisons, the nonparametric Mann-Whitney U Test has been applied. According to gender, there was no significant difference in met/week values of all indexes (p>0.05; also according to marital status, there was significant difference in met/week value of work index (p0.05, U=230,500 and sport indexes (p>0.05, U=282,000, PA levels of female trainers were found higher in home index. On the other hand, it was also determined that according to marital status, PA levels of single trainers were higher than married trainers in work index.

  1. [Effective communication strategies to frame the trainer-trainee dialogue in the clinical setting].

    Science.gov (United States)

    Gachoud, D; Félix, S; Monti, M

    2015-11-04

    Communication between trainer and trainee plays a central role in teaching and learning in the clinical environment. There are various strategies to frame the dialogue between trainee and trainer. These strategies allow trainers to be more effective in their supervision, which is important in our busy clinical environment. Communication strategies are well adapted to both in- and out-patient settings, to both under- and postgraduate contexts. This article presents three strategies that we think are particularly useful. They are meant to give feedback, to ask questions and to present a case.

  2. The WalkTrainer--a new generation of walking reeducation device combining orthoses and muscle stimulation.

    Science.gov (United States)

    Stauffer, Y; Allemand, Y; Bouri, M; Fournier, J; Clavel, R; Metrailler, P; Brodard, R; Reynard, F

    2009-02-01

    This paper presents a novel reeducation device for paraplegics that combines hybrid orthoses and closed-loop electrical muscle stimulation. Based on the so called Cyberthosis concept, the WalkTrainer enables an active muscular participation of the subject in the walking reeducation process by the mean of closed-loop muscle stimulation. The WalkTrainer is also equipped with a leg and pelvic orthosis, an active bodyweight support, and motorized wheels to allow true over ground deambulation. This paper will focus on the development of the WalkTrainer, the presentation of the control strategies, and also give some preliminary results of the first clinical trials.

  3. Improvement of training process of powerlifters on the basis of an interactive program "PersTrainer"

    Directory of Open Access Journals (Sweden)

    Volodymyr Ashanin

    2017-12-01

    Full Text Available Purpose: to develop and scientifically substantiate the program "PersTrainer" for improving the training process of powerlifters. Material & Methods: the study involved the powerlifters of 16–18 years. The following research methods were used: analysis and generalization of the literary sources and data of the Internet, pedagogical observation and the method of information modeling. Results: the interactive program "PersTrainer" is developed and theoretically justified, which allows individually calculating the training load in different training cycles. Conclusion: it is possible to plan training loads on the basis of individually proposed exercise complexes, which are presented in the interactive program "PersTrainer".

  4. Plan for a laser weapon verification research program

    Energy Technology Data Exchange (ETDEWEB)

    Karr, T.J.

    1990-03-01

    Currently there is great interest in the question of how, or even whether, a treaty limiting the development and deployment of laser weapons could be verified. The concept of cooperative laser weapon verification is that each party would place monitoring stations near the other party's declared or suspect laser weapon facilities. The monitoring stations would measure the primary laser observables'' such as power or energy, either directly or by collecting laser radiation scattered from the air or the target, and would verify that the laser is operated within treaty limits. This concept is modeled along the lines of the seismic network recently activated in the USSR as a joint project of the United States Geologic Survey and the Soviet Academy of Sciences. The seismic data, gathered cooperatively, can be used by each party as it wishes, including to support verification of future nuclear test ban treaties. For laser weapon verification the monitoring stations are envisioned as ground-based, and would verify treaty limitations on ground-based laser anti-satellite (ASAT) weapons and on the ground-based development of other laser weapons. They would also contribute to verification of limitations on air-, sea- and space-based laser weapons, and the technology developed for cooperative verification could also be used in national technical means of verification. 2 figs., 4 tabs.

  5. Table of contents, structure and methodical providing of preparation of future trainers-teachers to development of professional presentations of educational material

    Directory of Open Access Journals (Sweden)

    Svatyev А.V.

    2012-03-01

    Full Text Available In the article maintenance, structure and methodical providing of preparation of future trainers-teachers to development of professional presentations of educational material is analysed. The authors approach near lining up the stages of work with students in relation to the input of information technologies in an educational process is offered. The variants of combination of the program of studies and methodical providing of scientific process of future specialists are thoroughly considered. 100 respondents-students of 4 and 5 courses of physical education department were polled. A term "presentation" is exposed, it kinds are certain and classification of presentations is offered. Modern technologies of development of presentation are analysed.

  6. Societal Verification: Intellectual Game or International Game-Changer

    International Nuclear Information System (INIS)

    Hartigan, Kelsey; Hinderstein, Corey

    2013-01-01

    Within the nuclear nonproliferation and arms control field, there is an increasing appreciation for the potential of open source information technologies to supplement existing verification and compliance regimes. While clearly not a substitute for on-site inspections or national technical means, it may be possible to better leverage information gleaned from commercial satellite imagery, international trade records and the vast amount of data being exchanged online and between publics (including social media) so as to develop a more comprehensive set of tools and practices for monitoring and verifying a state’s nuclear activities and helping judge compliance with international obligations. The next generation “toolkit” for monitoring and verifying items, facility operations and activities will likely include a more diverse set of analytical tools and technologies than are currently used internationally. To explore these and other issues, the Nuclear Threat Initiative has launched an effort that examines, in part, the role that emerging technologies and “citizen scientists” might play in future verification regimes. This paper will include an assessment of past proliferation and security “events” and whether emerging tools and technologies would have provided indicators concurrently or in advance of these actions. Such case studies will be instrumental in understanding the reliability of these technologies and practices and in thinking through the requirements of a 21st century verification regime. Keywords: Verification, social media, open-source information, arms control, disarmament.

  7. Verification of Simulation Tools

    International Nuclear Information System (INIS)

    Richard, Thierry

    2015-01-01

    Before qualifying a simulation tool, the requirements shall first be clearly identified, i.e.: - What type of study needs to be carried out? - What phenomena need to be modeled? This phase involves writing a precise technical specification. Once the requirements are defined, the most adapted product shall be selected from the various software options available on the market. Before using a particular version of a simulation tool to support the demonstration of nuclear safety studies, the following requirements shall be met. - An auditable quality assurance process complying with development international standards shall be developed and maintained, - A process of verification and validation (V and V) shall be implemented. This approach requires: writing a report and/or executive summary of the V and V activities, defining a validated domain (domain in which the difference between the results of the tools and those of another qualified reference is considered satisfactory for its intended use). - Sufficient documentation shall be available, - A detailed and formal description of the product (software version number, user configuration, other settings and parameters) in the targeted computing environment shall be available. - Source codes corresponding to the software shall be archived appropriately. When these requirements are fulfilled, the version of the simulation tool shall be considered qualified for a defined domain of validity, in a given computing environment. The functional verification shall ensure that: - the computer architecture of the tool does not include errors, - the numerical solver correctly represents the physical mathematical model, - equations are solved correctly. The functional verification can be demonstrated through certification or report of Quality Assurance. The functional validation shall allow the user to ensure that the equations correctly represent the physical phenomena in the perimeter of intended use. The functional validation can

  8. THE TRAINER OF TEACHERS AND TEACHING THEIR PRACTICES: BENCHMARK FOR CITIZENSHIP EDUCATION ISSUE?

    Directory of Open Access Journals (Sweden)

    Valentín Félix-Salazar

    2018-03-01

    Full Text Available This is a qualitative study on the perceptions of the students of the Escuela Normal de Sinaloa (ENS about the teacher trainers and their citizen teaching practices. The objectives are geared to see the description and qualitative interpretation of the role that the ENS has played in citizenship education, the development of the practices and teaching strategies of the teacher trainer in relation with its citizen formation; furthermore, to know in what sense the teacher trainer of the ENS is an exemplary reference of citizenship for the own student. The collection of empirical data was developed through a questionnaire with open questions and an interview. The results indicate negative perceptions of students toward ENS and their trainers, their practices, their strategies used in teaching for the development of citizenship, as well as been a reference model of citizen.

  9. A Hybrid Expert Systems for Scheduling the US Army Close Combat Tactical Trainer (CCTT)

    National Research Council Canada - National Science Library

    McGinnis, Michael

    1996-01-01

    .... The first of the CATT family to be developed will be the Close Combat Tactical Trainer facility featuring manned simulator modules for training armored and mechanized forces at battalion and below...

  10. IMPLEMENTATION OF STEPPER TRAINER SIMULATOR IN PROFESSIONAL PREPARATION OF FUTURE SPECIALISTS ON PHYSICAL EDUCATION

    Directory of Open Access Journals (Sweden)

    Oksana K. Kornosenko

    2017-04-01

    Full Text Available In the article the purpose, aim, features and capabilities of the stepper trainer simulator (STS in professional preparation of future physical culture teachers are highlighted. STS is marked as a modern educational trainer device, developed for the purpose of professional preparation process improvement of future physical education teachers and fitness trainers. The functions of stepper trainer simulator (STS are grounded: educational, developing, stimulant, upbringing, organizational, integrational. Attention is paid to educational function, which focuses on possibility to teach students to work with the modern technical means of information transfer, to form the ability for independent creative activity, to adapt to realization of distance education model; the possibility of theoretical and practical study of health-improving aerobics basic steps.

  11. MST-80 microprocessor trainer. [Uses INTEL 8080A CPU and support chips housed in attache case

    Energy Technology Data Exchange (ETDEWEB)

    Jones, G. D.

    1976-05-21

    This trainer is a complete, self-contained microcomputer system housed in a brief case for portability and convenience of use. It utilizes INTEL's 8080A microprocessor and associated support chips. The trainer is designed to allow the student to explore and learn the hardware and software capability of the 8080 microprocessor. It includes a breadboard socket so that experiments can be interfaced to the trainer. This option allows the student to learn both interfacing techniques and programing. A keyboard and numerical display are provided for the student to communicate with the trainer. The keyboard and numerical display can be used with either the octal number system or the hexadecimal number system. 8 figures. (RWR)

  12. The Commanders' Integrated Training Tool for the Close Combat Tactical Trainer 3: Final Prototype Development

    National Research Council Canada - National Science Library

    Flynn, Michael

    2001-01-01

    ...) for the Close Combat Tactical Trainer (CCTT), a system of armored vehicle manned-module simulators and workstations that allows units to train collective armor and infantry tasks at the platoon through battalion task force level...

  13. Online fingerprint verification.

    Science.gov (United States)

    Upendra, K; Singh, S; Kumar, V; Verma, H K

    2007-01-01

    As organizations search for more secure authentication methods for user access, e-commerce, and other security applications, biometrics is gaining increasing attention. With an increasing emphasis on the emerging automatic personal identification applications, fingerprint based identification is becoming more popular. The most widely used fingerprint representation is the minutiae based representation. The main drawback with this representation is that it does not utilize a significant component of the rich discriminatory information available in the fingerprints. Local ridge structures cannot be completely characterized by minutiae. Also, it is difficult quickly to match two fingerprint images containing different number of unregistered minutiae points. In this study filter bank based representation, which eliminates these weakness, is implemented and the overall performance of the developed system is tested. The results have shown that this system can be used effectively for secure online verification applications.

  14. Shift Verification and Validation

    Energy Technology Data Exchange (ETDEWEB)

    Pandya, Tara M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Evans, Thomas M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Davidson, Gregory G [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Johnson, Seth R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Godfrey, Andrew T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-09-07

    This documentation outlines the verification and validation of Shift for the Consortium for Advanced Simulation of Light Water Reactors (CASL). Five main types of problems were used for validation: small criticality benchmark problems; full-core reactor benchmarks for light water reactors; fixed-source coupled neutron-photon dosimetry benchmarks; depletion/burnup benchmarks; and full-core reactor performance benchmarks. We compared Shift results to measured data and other simulated Monte Carlo radiation transport code results, and found very good agreement in a variety of comparison measures. These include prediction of critical eigenvalue, radial and axial pin power distributions, rod worth, leakage spectra, and nuclide inventories over a burn cycle. Based on this validation of Shift, we are confident in Shift to provide reference results for CASL benchmarking.

  15. Left-handed cardiac surgery: tips from set up to closure for trainees and their trainers.

    Science.gov (United States)

    Burdett, Clare; Dunning, Joel; Goodwin, Andrew; Theakston, Maureen; Kendall, Simon

    2016-09-01

    There are certain obstacles which left-handed surgeons can face when training but these are not necessary and often perpetuated by a lack of knowledge. Most have been encountered and overcome at some point but unless recorded and disseminated they will have to be resolved repeatedly by each trainee and their trainers. This article highlights difficulties that the left-hander may encounter in cardiac surgery and gives practical operative advice for both trainees and their trainers to help overcome them.

  16. Sports Nutrition Knowledge, Perceptions, Resources, and Advice Given by Certified CrossFit Trainers

    OpenAIRE

    Cassie Maxwell; Kyle Ruth; Carol Friesen

    2017-01-01

    Background: CrossFit is a large, growing force in the fitness community. Currently, Level 1 and 2 CrossFit certification classes do not include nutrition education. The purpose of this study was to identify sports nutrition knowledge, perceptions, resources, and advice given by Certified CrossFit Trainers. Methods: An online questionnaire that measured these four constructs was placed on a private Facebook community, open only to certified CrossFit trainers, for 10 days. Results: Complete sur...

  17. Training medical students in general practice: a qualitative study among general practitioner trainers in Sri Lanka

    Directory of Open Access Journals (Sweden)

    R.P.J.C. Ramanayake

    2015-01-01

    Full Text Available Introduction: Worldwide Family Medicine has gained an important place in the undergraduate medical curriculum over the last few decades and general practices have become training centers for students. Exposure to patients early in the disease process, out patient management of common problems, follow up of chronic diseases and psychosocial aspects of health and disease are educational advantages of community based training but such training could have varying impact on patients, students and trainers. This study explored the views of General Practitioner (GP trainers on their experience in training students. Methodology: This qualitative study was conducted among GP trainers of the faculty of medicine, University of Kelaniya, Sri Lanka, to explore their experience on wide range of issues related to their role as GP trainers. The interviews were recorded and transcribed verbatim. Themes expressed were identified. Results: Altruistic reasons, self-satisfaction, self-esteem and opportunity to improve their knowledge were the motivations for their involvement in teaching. Teachers were confident of their clinical and teaching skills. They perceived that patients were willing participants of the process and benefited from it. There was a positive impact on consultation dynamics. Time pressure was the major problem and ideal number of trainees per session was two. They were willing to attend teacher training workshops to update their knowledge. Conclusions: GP trainers driven by altruistic reasons were willing participants of student training process. The perceived advantages of involvement of teaching for trainers and patients were an encouragement for potential trainers. University should organize training sessions for trainers which will boost their knowledge, confidence and teaching skills which will eventually benefit students.

  18. Brain-actuated gait trainer with visual and proprioceptive feedback

    Science.gov (United States)

    Liu, Dong; Chen, Weihai; Lee, Kyuhwa; Chavarriaga, Ricardo; Bouri, Mohamed; Pei, Zhongcai; Millán, José del R.

    2017-10-01

    Objective. Brain-machine interfaces (BMIs) have been proposed in closed-loop applications for neuromodulation and neurorehabilitation. This study describes the impact of different feedback modalities on the performance of an EEG-based BMI that decodes motor imagery (MI) of leg flexion and extension. Approach. We executed experiments in a lower-limb gait trainer (the legoPress) where nine able-bodied subjects participated in three consecutive sessions based on a crossover design. A random forest classifier was trained from the offline session and tested online with visual and proprioceptive feedback, respectively. Post-hoc classification was conducted to assess the impact of feedback modalities and learning effect (an improvement over time) on the simulated trial-based performance. Finally, we performed feature analysis to investigate the discriminant power and brain pattern modulations across the subjects. Main results. (i) For real-time classification, the average accuracy was 62.33 +/- 4.95 % and 63.89 +/- 6.41 % for the two online sessions. The results were significantly higher than chance level, demonstrating the feasibility to distinguish between MI of leg extension and flexion. (ii) For post-hoc classification, the performance with proprioceptive feedback (69.45 +/- 9.95 %) was significantly better than with visual feedback (62.89 +/- 9.20 %), while there was no significant learning effect. (iii) We reported individual discriminate features and brain patterns associated to each feedback modality, which exhibited differences between the two modalities although no general conclusion can be drawn. Significance. The study reported a closed-loop brain-controlled gait trainer, as a proof of concept for neurorehabilitation devices. We reported the feasibility of decoding lower-limb movement in an intuitive and natural way. As far as we know, this is the first online study discussing the role of feedback modalities in lower-limb MI decoding. Our results suggest that

  19. Improved verification methods for safeguards verifications at enrichment plants

    International Nuclear Information System (INIS)

    Lebrun, A.; Kane, S. C.; Bourva, L.; Poirier, S.; Loghin, N. E.; Langlands, D.

    2009-01-01

    The International Atomic Energy Agency (IAEA) has initiated a coordinated research and development programme to improve its verification methods and equipment applicable to enrichment plants. The programme entails several individual projects to meet the objectives of the IAEA Safeguards Model Approach for Gas Centrifuge Enrichment Plants updated in 2006. Upgrades of verification methods to confirm the absence of HEU (highly enriched uranium) production have been initiated and, in particular, the Cascade Header Enrichment Monitor (CHEM) has been redesigned to reduce its weight and incorporate an electrically cooled germanium detector. Such detectors are also introduced to improve the attended verification of UF 6 cylinders for the verification of the material balance. Data sharing of authenticated operator weighing systems such as accountancy scales and process load cells is also investigated as a cost efficient and an effective safeguards measure combined with unannounced inspections, surveillance and non-destructive assay (NDA) measurement. (authors)

  20. An International Comparison of Nutrition Education Standards, Occupational Standards and Scopes of Practice for Personal Trainers.

    Science.gov (United States)

    Barnes, Katelyn; Ball, Lauren; Desbrow, Ben

    2017-12-01

    Personal trainers are well placed to provide nutrition care in line with their recommended scope of practice. However, providing nutrition care beyond their recommended scope of practice has been identified as an industry risk. The International Confederation of Registers for Exercise Professionals (ICREPs) have international standards for nutrition knowledge and skills that are recommended for all fitness professionals, including personal trainers. This study investigates whether the ICREPs standards align with i) national nutrition education standards and ii) national nutrition occupational standards and scopes of practice for personal trainers within ICREPs affiliated countries. Content analysis of each standard and/or scope of practice was undertaken to extract nutrition statements. Extracted statements were matched with nutrition components of the ICREPs standards to result in a score based on the number of aligned ICREPs knowledge and skills criteria. Ten countries, with 16 organizations, were identified as being involved in the development of national education standards, occupational standards, or scopes of practice for personal trainers. The educational and occupational standards varied widely among countries and had minimal alignment with the ICREPs standards. As such, the expected role of personal trainers in providing nutrition care appeared to differ between countries. Further work is required to support personal trainers to develop a level of knowledge and skills that enables the provision of safe, consistent, and effective nutrition care.

  1. Increasing the realism of a laparoscopic box trainer: a simple, inexpensive method.

    Science.gov (United States)

    Hull, Louise; Kassab, Eva; Arora, Sonal; Kneebone, Roger

    2010-01-01

    Simulation-based training in medical education is increasing. Realism is an integral element of creating an engaging, effective training environment. Although physical trainers offer a low-cost alternative to expensive virtual reality (VR) simulators, many lack in realism. The aim of this research was to enhance the realism of a laparoscopic box trainer by using a simple, inexpensive method. Digital images of the abdominal cavity were captured from a VR simulator. The images were printed onto a laminated card that lined the bottom and sides of the box-trainer cavity. The standard black neoprene material that encloses the abdominal cavity was replaced with a skin-colored silicon model. The realism of the modified box trainer was assessed by surgeons, using quantitative and qualitative methodologies. Results suggest that the modified box trainer was more realistic than a standard box trainer alone. Incorporating this technique in the training of laparoscopic skills is an inexpensive means of emulating surgical reality that may enhance the engagement of the learner in simulation.

  2. Knowledge about sports-related concussion: is the message getting through to coaches and trainers?

    Science.gov (United States)

    White, Peta E; Newton, Joshua D; Makdissi, Michael; Sullivan, S John; Davis, Gavin; McCrory, Paul; Donaldson, Alex; Ewing, Michael T; Finch, Caroline F

    2014-01-01

    The need for accurate diagnosis and appropriate return-to-play decisions following a concussion in sports has prompted the dissemination of guidelines to assist managing this condition. This study aimed to assess whether key messages within these guidelines are reflected in the knowledge of coaches and sports trainers involved in community sport. An online knowledge survey was widely promoted across Australia in May-August 2012 targeting community Australian Football (AF) and Rugby League (RL) coaches and sports trainers. 260 AF coaches, 161 AF sports trainers, 267 RL coaches and 228 RL sports trainers completed the survey. Knowledge scores were constructed from Likert scales and compared across football codes and respondent groups. General concussion knowledge did not differ across codes but sports trainers had higher levels than did coaches. There were no significant differences in either concussion symptoms or concussion management knowledge across codes or team roles. Over 90% of respondents correctly identified five of the eight key signs or symptoms of concussion. Fewer than 50% recognised the increased risk of another concussion following an initial concussion. Most incorrectly believed or were uncertain that scans typically show damage to the brain after a concussion occurs. Fewer than 25% recognised, and >40% were uncertain that younger players typically take longer to recover from concussion than adults. The key messages from published concussion management guidelines have not reached community sports coaches and sports trainers. This needs to be redressed to maximise the safety of all of those involved in community sport.

  3. Model Based Verification of Cyber Range Event Environments

    Science.gov (United States)

    2015-12-10

    built a software development environment that uses to support the development and verification of on-board software for spacecraft. Tanizaki et al...Technologies, Piscataway, 2011. [16] Hiroaki Tanizaki , Toshiaki Aoki, and Takuya Katayama, "A Variability Management Method for Software

  4. Reducing software security risk through an integrated approach research initiative model based verification of the Secure Socket Layer (SSL) Protocol

    Science.gov (United States)

    Powell, John D.

    2003-01-01

    This document discusses the verification of the Secure Socket Layer (SSL) communication protocol as a demonstration of the Model Based Verification (MBV) portion of the verification instrument set being developed under the Reducing Software Security Risk (RSSR) Trough an Integrated Approach research initiative. Code Q of the National Aeronautics and Space Administration (NASA) funds this project. The NASA Goddard Independent Verification and Validation (IV&V) facility manages this research program at the NASA agency level and the Assurance Technology Program Office (ATPO) manages the research locally at the Jet Propulsion Laboratory (California institute of Technology) where the research is being carried out.

  5. Development of Microcontroller-Based Ball and Beam Trainer Kit

    Directory of Open Access Journals (Sweden)

    Gunawan Dewantoro

    2015-03-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE A ball and beam trainer kit based on microcontroller was developed for teaching control system course for the sophomore students. This specially-purposed kit consists of a ball located on a beam with a fixed axle at one of its end. At the other end, a servomotor was employed to control the position of the ball by adjusting the rotation angle of the servomotor. Seven predetermined positions were set to 10, 20, 30, 40, 50, 60, and 70 cm relative to the fixed axle of the beam. The Proportional-Integral-Derivative (PID scheme was then used to compensate the error. This kit is equipped with a user interface to configure controller coefficients, select the set points, plot the actual ball position, and display parameter values. The user interface program runs on PC or notebook connected to microcontroller via serial communications. A questionnaire-based assessment about the use of this kit was conducted by 17 students taking the course, giving a rating value of 94.12%.

  6. System and Component Software Specification, Run-time Verification and Automatic Test Generation, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The following background technology is described in Part 5: Run-time Verification (RV), White Box Automatic Test Generation (WBATG). Part 5 also describes how WBATG...

  7. Numident Online Verification Utility (NOVU)

    Data.gov (United States)

    Social Security Administration — NOVU is a mainframe application that accesses the NUMIDENT to perform real-time SSN verifications. This program is called by other SSA online programs that serve as...

  8. IDEF method for designing seismic information system in CTBT verification

    International Nuclear Information System (INIS)

    Zheng Xuefeng; Shen Junyi; Jin Ping; Zhang Huimin; Zheng Jiangling; Sun Peng

    2004-01-01

    Seismic information system is of great importance for improving the capability of CTBT verification. A large amount of money has been appropriated for the research in this field in the U.S. and some other countries in recent years. However, designing and developing a seismic information system involves various technologies about complex system design. This paper discusses the IDEF0 method to construct function models and the IDEF1x method to make information models systemically, as well as how they are used in designing seismic information system in CTBT verification. (authors)

  9. FY 1995 report on verification of geothermal exploration technology. Development of fracture reservoir exploration technology (development of seismic exploration); 1995 nendo chinetsu tansa gijutsunado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report provides the development of new exploration technology using elastic waves, such as reflection seismic survey, VSP, and seismic tomography, for precisely characterizing subsurface fractures in geothermal reservoirs. In order to investigate and improve the effective data acquisition and analysis methods for detecting a fault type of fractures, an experiment of a seismic tomography method was conducted using wells drilled in the Ogiri geothermal field, Aira-gun, Kagoshima Prefecture. An experiment of propagation characteristics of piezo type underground seismic source in the volcanic field was also conducted as a trend survey of underground seismic sources. The fracture type in the model field was systematically analyzed by measuring the core samples obtained in the demonstration test field through remanence measurement, fluid inclusion measurement, and zircon measurement using test equipment, and by analyzing results obtained from cores and results of seismic tomography obtained from the wells. Based on these results, the effectiveness and practical application of exploration methods using elastic waves were investigated. 80 refs., 250 figs., 49 tabs.

  10. Enhanced Verification Test Suite for Physics Simulation Codes

    Energy Technology Data Exchange (ETDEWEB)

    Kamm, J R; Brock, J S; Brandon, S T; Cotrell, D L; Johnson, B; Knupp, P; Rider, W; Trucano, T; Weirs, V G

    2008-10-10

    This document discusses problems with which to augment, in quantity and in quality, the existing tri-laboratory suite of verification problems used by Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories (SNL). The purpose of verification analysis is demonstrate whether the numerical results of the discretization algorithms in physics and engineering simulation codes provide correct solutions of the corresponding continuum equations. The key points of this document are: (1) Verification deals with mathematical correctness of the numerical algorithms in a code, while validation deals with physical correctness of a simulation in a regime of interest. This document is about verification. (2) The current seven-problem Tri-Laboratory Verification Test Suite, which has been used for approximately five years at the DOE WP laboratories, is limited. (3) Both the methodology for and technology used in verification analysis have evolved and been improved since the original test suite was proposed. (4) The proposed test problems are in three basic areas: (a) Hydrodynamics; (b) Transport processes; and (c) Dynamic strength-of-materials. (5) For several of the proposed problems we provide a 'strong sense verification benchmark', consisting of (i) a clear mathematical statement of the problem with sufficient information to run a computer simulation, (ii) an explanation of how the code result and benchmark solution are to be evaluated, and (iii) a description of the acceptance criterion for simulation code results. (6) It is proposed that the set of verification test problems with which any particular code be evaluated include some of the problems described in this document. Analysis of the proposed verification test problems constitutes part of a necessary--but not sufficient--step that builds confidence in physics and engineering simulation codes. More complicated test cases, including physics models of

  11. Advanced verification methods for OVI security ink

    Science.gov (United States)

    Coombs, Paul G.; McCaffery, Shaun F.; Markantes, Tom

    2006-02-01

    OVI security ink +, incorporating OVP security pigment* microflakes, enjoys a history of effective document protection. This security feature provides not only first-line recognition by the person on the street, but also facilitates machine-readability. This paper explores the evolution of OVI reader technology from proof-of-concept to miniaturization. Three different instruments have been built to advance the technology of OVI machine verification. A bench-top unit has been constructed which allows users to automatically verify a multitude of different banknotes and OVI images. In addition, high speed modules were fabricated and tested in a state of the art banknote sorting machine. Both units demonstrate the ability of modern optical components to illuminate and collect light reflected from the interference platelets within OVI ink. Electronic hardware and software convert and process the optical information in milliseconds to accurately determine the authenticity of the security feature. Most recently, OVI ink verification hardware has been miniaturized and simplified providing yet another platform for counterfeit protection. These latest devices provide a tool for store clerks and bank tellers to unambiguously determine the validity of banknotes in the time period it takes the cash drawer to be opened.

  12. Development of a novel iPad-based laparoscopic trainer and comparison with a standard laparoscopic trainer for basic laparoscopic skills testing.

    Science.gov (United States)

    Yoon, Renai; Del Junco, Michael; Kaplan, Adam; Okhunov, Zhamshid; Bucur, Philip; Hofmann, Martin; Alipanah, Reza; McDougall, Elspeth M; Landman, Jaime

    2015-01-01

    We developed the iTrainer (iT) as a portable laparoscopic trainer, which incorporates the iPad tablet. We then compared the iT with a standard pelvic trainer (SPT) to assess surgical skills as well as its image quality, resolution, brightness, comfort, and overall performance. We designed and constructed the iT to be compatible with the Apple iPad 3 and standard laparoscopic instruments. Participants were assigned to perform the thread-the-loops task on both trainers and were prospectively randomized to start on either the iT or the SPT. Each participant was allowed a 2-minute warm-up before the 2-minute testing period. We scored participants using the product of skill quality (0-4 scale) and quantity of loops threaded (0-10 scale). Participants then rated each trainer on image quality, resolution, brightness, comfort, and overall performance on a 5-point Likert scale. A total of 45 subjects including 10 undergraduates, 10 medical students, 10 general surgery and urology residents, and 15 experts (fellows and attending surgeons) participated in this study. There was no significant difference between thread-the-loops task scores completed on the iT when compared with the SPT for all groups tested (p > 0.05) with the exception of the medical student group, who performed better on the SPT (p < 0.05). On evaluation of each trainer, participants rated the iT as having superior image quality and resolution when compared with the SPT (p < 0.05) but rated the SPT higher in overall performance (p < 0.05). Brightness and comfort were rated similarly for both trainers. We have demonstrated face validity and criterion validity for the thread-the-loops task on the iT. The iT rated superior in image quality and resolution but inferior in overall performance compared with the SPT. The iT provides trainees a unique advantage over SPT as an additional resource to laparoscopic training as it is inexpensive, portable, and can be readily available for training. Copyright © 2014

  13. A Formal Approach to the Verification of Networks on Chip

    Directory of Open Access Journals (Sweden)

    Schmaltz Julien

    2009-01-01

    Full Text Available Abstract The current technology allows the integration on a single die of complex systems-on-chip (SoCs that are composed of manufactured blocks (IPs, interconnected through specialized networks on chip (NoCs. IPs have usually been validated by diverse techniques (simulation, test, formal verification and the key problem remains the validation of the communication infrastructure. This paper addresses the formal verification of NoCs by means of a mechanized proof tool, the ACL2 theorem prover. A metamodel for NoCs has been developed and implemented in ACL2. This metamodel satisfies a generic correctness statement. Its verification for a particular NoC instance is reduced to discharging a set of proof obligations for each one of the NoC constituents. The methodology is demonstrated on a realistic and state-of-the-art design, the Spidergon network from STMicroelectronics.

  14. Aspire Project - an integrated wellness coaching model facilitated by an online coaching technology

    Directory of Open Access Journals (Sweden)

    Paul Thomas Pook

    2015-10-01

    PT Aspire provides personal trainers and coaches with a powerful facilitator of client goal achievement and behaviour change. It encourages an innovative approach to coaching that considers the key elements of wellness delivered via digital technology.

  15. Athletic Trainer Services in US Private Secondary Schools.

    Science.gov (United States)

    Pike, Alicia; Pryor, Riana R; Mazerolle, Stephanie M; Stearns, Rebecca L; Casa, Douglas J

    2016-09-01

    Availability of athletic trainer (AT) services in US secondary schools has recently been reported to be as high as 70%, but this only describes the public sector. The extent of AT coverage in private secondary school settings has yet to be investigated and may differ from the public secondary school setting for several reasons, including differences in funding sources. To determine the level of AT services in US private secondary schools and identify the reasons why some schools did not employ ATs. Concurrent mixed-methods study. Private secondary schools in the United States. Of 5414 private secondary schools, 2044 (38%) responded to the survey. School administrators responded to the survey via telephone or e-mail. This instrument was previously used in a study examining AT services among public secondary schools. Descriptive statistics provided national data. Open-ended questions were evaluated through content analysis. Of the 2044 schools that responded, 58% (1176/2044) offered AT services, including 28% (574/2040) full time, 25% (501/2042) part time, 4% (78/1918) per diem, and 20% (409/2042) from a hospital or clinic. A total of 84% (281 285/336 165) of athletes had access to AT services. Larger private secondary schools were more likely to have AT services available. Barriers to providing AT services in the private sector were budgetary constraints, school size and sports, and lack of awareness of the role of an AT. More than half of the surveyed private secondary schools in the United States had AT services available; however, only 28% had a full-time AT. This demonstrates the need for increased medical coverage to provide athletes in this setting the appropriate level of care. Budgetary concerns, size of the school and sport offerings, and lack of awareness of the role of the AT continued to be barriers in the secondary school setting.

  16. Athletic Trainer Services in Public and Private Secondary Schools.

    Science.gov (United States)

    Pike, Alicia M; Pryor, Riana R; Vandermark, Lesley W; Mazerolle, Stephanie M; Casa, Douglas J

    2017-01-01

     The presence of athletic trainers (ATs) in secondary schools to provide medical care is crucial, especially with the rise in sports participation and resulting high volume of injuries. Previous authors have investigated the level of AT services offered, but the differences in medical care offered between the public and private sectors have not been explored.  To compare the level of AT services in public and private secondary schools.  Concurrent mixed-methods study.  Public and private secondary schools in the United States.  A total of 10 553 secondary schools responded to the survey (8509 public, 2044 private).  School administrators responded to the survey via telephone or e-mail. Descriptive statistics depict national data. Open-ended questions were evaluated through content analysis.  A greater percentage of public secondary schools than private secondary schools hired ATs. Public secondary schools provided a higher percentage of full-time, part-time, and clinic AT services than private secondary schools. Only per diem AT services were more frequent in the private sector. Regardless of the extent of services, reasons for not employing an AT were similar between sectors. Common barriers were budget, school size, and lack of awareness of the role of an AT. Unique to the public sector, remote location was identified as a challenge faced by some administrators.  Both public and private secondary schools lacked ATs, but higher percentages of total AT services and full-time services were available in the public sector. Despite differences in AT services, both settings provided a similar number of student-athletes with access to medical care. Barriers to hiring ATs were comparable between public and private secondary schools; however, remote location was a unique challenge for the public sector.

  17. Athletic Directors' Barriers to Hiring Athletic Trainers in High Schools

    Science.gov (United States)

    Mazerolle, Stephanie M.; Raso, Samantha R.; Pagnotta, Kelly D.; Stearns, Rebecca L.; Casa, Douglas J.

    2015-01-01

    Context In its best-practices recommendation, the Inter-Association Task Force for Preventing Sudden Death in Secondary School Athletics Programs urged all high schools to have a certified athletic trainer (AT) on staff. Despite the recommendation, many high schools lack the medical services of an AT. Objective To examine the barriers that athletic directors (ADs) face in hiring ATs in public high schools and in providing medical coverage for their student-athletes. Design Qualitative study. Setting Semistructured telephone interviews. Patients or Other Participants Twenty full-time public high school ADs (17 men, 3 women) from various geographical regions of the United States (6 North, 4 South, 4 Midwest, 6 West) participated. Data saturation guided the total number of participants. Data Collection and Analysis We completed telephone interviews guided by a semistructured questionnaire with all participants. Interviews were recorded and transcribed verbatim. Multiple-analyst triangulation and peer review were included as steps to establish data credibility. We analyzed the data using the principles of the general inductive approach. Results We identified 3 themes. Lack of power represented the inability of an AD to hire an AT, which was perceived to be a responsibility of the superintendent and school board. Budget concerns pertained to the funding allocated to specific resources within a school, which often did not include an AT. Nonbudget concerns represented rural locations without clinics or hospitals nearby; misconceptions about the role of an AT, which led to the belief that first-aid–trained coaches are appropriate medical providers; and community support from local clinics, hospitals, and volunteers. Conclusions Many ADs would prefer to employ ATs in their schools; however, they perceive that they are bound by the hiring and budgeting decisions of superintendents and school boards. Public school systems are experiencing the consequences of national budget

  18. Athletic Trainers' Facilitators of Professional Commitment in the Collegiate Setting

    Science.gov (United States)

    Eason, Christianne M.; Mazerolle, Stephanie M.; Pitney, William A.

    2015-01-01

    Context: Professional responsibility, rewards and respect, and time for rejuvenation are factors supporting professional commitment for athletic trainers (ATs) in the high school setting. The inherent complexities of an occupational setting can mitigate perceptions of professional commitment. Thus far, evidence is lacking regarding professional commitment for ATs in other occupational settings. Objective: To extend the literature on professional commitment of the AT to the collegiate setting. Design: Qualitative study. Setting: Collegiate. Patients or Other Participants: Thirty-three Board of Certification-certified ATs employed in the collegiate setting (National Collegiate Athletic Association Division I = 11, Division II = 9, Division III = 13) with an average of 10 ± 8 years of clinical experience volunteered. Data saturation guided the total number of participants. Data Collection and Analysis: Online journaling via QuestionPro was used to collect data from all participants. Two strategies, multiple-analyst triangulation and peer review, were completed to satisfy data credibility. Data were evaluated using a general inductive approach. Results: Likert-scale data revealed no differences regarding levels of professional commitment across divisions. Two themes emerged from the inductive-content analysis: (1) professional responsibility and (2) coworker support. The emergent theme of professional responsibility contained 4 subthemes: (1) dedication to advancing the athletic training profession, (2) ardor for job responsibilities, (3) dedication to the student-athlete, and (4) commitment to education. Our participants were able to better maintain their own professional commitment when they felt their coworkers were also committed to the profession. Conclusions: The collegiate ATs investigated in this study, regardless of division, demonstrated professional commitment propelled by their aspiration to advance the profession, as well as their dedication to student

  19. Athletic Directors' Barriers to Hiring Athletic Trainers in High Schools.

    Science.gov (United States)

    Mazerolle, Stephanie M; Raso, Samantha R; Pagnotta, Kelly D; Stearns, Rebecca L; Casa, Douglas J

    2015-10-01

    In its best-practices recommendation, the Inter-Association Task Force for Preventing Sudden Death in Secondary School Athletics Programs urged all high schools to have a certified athletic trainer (AT) on staff. Despite the recommendation, many high schools lack the medical services of an AT. To examine the barriers that athletic directors (ADs) face in hiring ATs in public high schools and in providing medical coverage for their student-athletes. Qualitative study. Semistructured telephone interviews. Twenty full-time public high school ADs (17 men, 3 women) from various geographical regions of the United States (6 North, 4 South, 4 Midwest, 6 West) participated. Data saturation guided the total number of participants. We completed telephone interviews guided by a semistructured questionnaire with all participants. Interviews were recorded and transcribed verbatim. Multiple-analyst triangulation and peer review were included as steps to establish data credibility. We analyzed the data using the principles of the general inductive approach. We identified 3 themes. Lack of power represented the inability of an AD to hire an AT, which was perceived to be a responsibility of the superintendent and school board. Budget concerns pertained to the funding allocated to specific resources within a school, which often did not include an AT. Nonbudget concerns represented rural locations without clinics or hospitals nearby; misconceptions about the role of an AT, which led to the belief that first-aid-trained coaches are appropriate medical providers; and community support from local clinics, hospitals, and volunteers. Many ADs would prefer to employ ATs in their schools; however, they perceive that they are bound by the hiring and budgeting decisions of superintendents and school boards. Public school systems are experiencing the consequences of national budget cuts and often do not have the freedom to hire ATs when other school staff are being laid off.

  20. The professional socialization of the graduate assistant athletic trainer.

    Science.gov (United States)

    Mazerolle, Stephanie M; Eason, Christianne M; Clines, Stephanie; Pitney, William A

    2015-05-01

    The graduate assistant athletic trainer (AT) position often serves as one's first experience working independently as an AT and is also an important aspect of the professional socialization process. The socialization experiences of graduate assistant ATs have yet to be fully explored. To understand the socialization process for graduate assistant ATs during their graduate experience. Qualitative study. We conducted phone interviews with all participants. A total of 25 graduate assistant ATs (20 women, 5 men) studying in 1 of 3 academic tracks: (1) accredited postprofessional athletic training program (n = 8), (2) postprofessional athletic training program (n = 11), or (3) a nonathletic training degree program (n = 6). The average age was 25 ± 5 years, and the median age was 24 years. Participants were certified by the Board of Certification for an average of 2 ± 0.4 years. We analyzed the data using a general inductive approach. Peer review, field notes, and intercoder reliability established trustworthiness. Data saturation guided participant recruitment. The ability to gain clinical independence as a practitioner was an important socialization process. Having the chance to develop a relationship with a mentor, who provided support, guidance, and more of a hierarchical relationship, was an important socializing agent for the graduate assistant AT. Participants used the orientation session as a means to understand the expectations and role of the graduate-assistant position. Academic coursework was a way to achieve better inductance into the role via the opportunity to apply classroom skills during their clinical practice. Socializing the graduate assistant blends formal and informal processes. Transition to practice is a critical aspect of the profession; thus, supporting autonomous practice with directed mentoring can promote professional maturity.

  1. VAMOS: The verification and monitoring options study: Current research options for in-situ monitoring and verification of contaminant remediation and containment within the vadose zone

    International Nuclear Information System (INIS)

    Betsill, J.D.; Gruebel, R.D.

    1995-09-01

    The Verification and Monitoring Options Study Project (VAMOS) was established to identify high-priority options for future vadose-zone environmental research in the areas of in-situ remediation monitoring, post-closure monitoring, and containment emplacement and verification monitoring. VAMOS examined projected needs not currently being met with applied technology in order to develop viable monitoring and verification research options. The study emphasized a compatible systems approach to reinforce the need for utilizing compatible components to provide user friendly site monitoring systems. To identify the needs and research options related to vadose-zone environmental monitoring and verification, a literature search and expert panel forums were conducted. The search included present drivers for environmental monitoring technology, technology applications, and research efforts. The forums included scientific, academic, industry, and regulatory environmental professionals as well as end users of environmental technology. The experts evaluated current and future monitoring and verification needs, methods for meeting these needs, and viable research options and directions. A variety of high-priority technology development, user facility, and technology guidance research options were developed and presented as an outcome of the literature search and expert panel forums

  2. An analysis of equine round pen training videos posted online: Differences between amateur and professional trainers.

    Science.gov (United States)

    Kydd, Erin; Padalino, Barbara; Henshall, Cathrynne; McGreevy, Paul

    2017-01-01

    Natural Horsemanship is popular among many amateur and professional trainers and as such, has been the subject of recent scientific enquiry. One method commonly adopted by Natural Horsemanship (NH) trainers is that of round pen training (RPT). RPT sessions are usually split into a series of bouts; each including two phases: chasing/flight and chasing offset/flight offset. However, NH training styles are heterogeneous. This study investigated online videos of RPT to explore the characteristics of RPT sessions and test for differences in techniques and outcomes between amateurs and professionals (the latter being defined as those with accompanying online materials that promote clinics, merchandise or a service to the public). From more than 300 candidate videos, we selected sample files for individual amateur (n = 24) and professional (n = 21) trainers. Inclusion criteria were: training at liberty in a Round Pen; more than one bout and good quality video. Sessions or portions of sessions were excluded if the trainer attached equipment, such as a lunge line, directly to the horse or the horse was saddled, mounted or ridden. The number of bouts and duration of each chasing and non-chasing phase were recorded, and the duration of each RPT session was calculated. General weighted regression analysis revealed that, when compared with amateurs, professionals showed fewer arm movements per bout (pamateurs did (pamateurs Overall, these findings highlight the need for selectivity when using the internet as an educational source and the importance of trainer skill and excellent timing when using negative reinforcement in horse training.

  3. Verification of Chemical Weapons Destruction

    International Nuclear Information System (INIS)

    Lodding, J.

    2010-01-01

    The Chemical Weapons Convention is the only multilateral treaty that bans completely an entire category of weapons of mass destruction under international verification arrangements. Possessor States, i.e. those that have chemical weapons stockpiles at the time of becoming party to the CWC, commit to destroying these. All States undertake never to acquire chemical weapons and not to help other States acquire such weapons. The CWC foresees time-bound chemical disarmament. The deadlines for destruction for early entrants to the CWC are provided in the treaty. For late entrants, the Conference of States Parties intervenes to set destruction deadlines. One of the unique features of the CWC is thus the regime for verifying destruction of chemical weapons. But how can you design a system for verification at military sites, while protecting military restricted information? What degree of assurance is considered sufficient in such circumstances? How do you divide the verification costs? How do you deal with production capability and initial declarations of existing stockpiles? The founders of the CWC had to address these and other challenges in designing the treaty. Further refinement of the verification system has followed since the treaty opened for signature in 1993 and since inspection work was initiated following entry-into-force of the treaty in 1997. Most of this work concerns destruction at the two large possessor States, Russia and the United States. Perhaps some of the lessons learned from the OPCW experience may be instructive in a future verification regime for nuclear weapons. (author)

  4. CASL Verification and Validation Plan

    Energy Technology Data Exchange (ETDEWEB)

    Mousseau, Vincent Andrew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dinh, Nam [North Carolina State Univ., Raleigh, NC (United States)

    2016-06-30

    This report documents the Consortium for Advanced Simulation of LWRs (CASL) verification and validation plan. The document builds upon input from CASL subject matter experts, most notably the CASL Challenge Problem Product Integrators, CASL Focus Area leaders, and CASL code development and assessment teams. This document will be a living document that will track progress on CASL to do verification and validation for both the CASL codes (including MPACT, CTF, BISON, MAMBA) and for the CASL challenge problems (CIPS, PCI, DNB). The CASL codes and the CASL challenge problems are at differing levels of maturity with respect to validation and verification. The gap analysis will summarize additional work that needs to be done. Additional VVUQ work will be done as resources permit. This report is prepared for the Department of Energy’s (DOE’s) CASL program in support of milestone CASL.P13.02.

  5. CTBT Integrated Verification System Evaluation Model

    Energy Technology Data Exchange (ETDEWEB)

    Edenburn, M.W.; Bunting, M.L.; Payne, A.C. Jr.

    1997-10-01

    Sandia National Laboratories has developed a computer based model called IVSEM (Integrated Verification System Evaluation Model) to estimate the performance of a nuclear detonation monitoring system. The IVSEM project was initiated in June 1994, by Sandia`s Monitoring Systems and Technology Center and has been funded by the US Department of Energy`s Office of Nonproliferation and National Security (DOE/NN). IVSEM is a simple, top-level, modeling tool which estimates the performance of a Comprehensive Nuclear Test Ban Treaty (CTBT) monitoring system and can help explore the impact of various sensor system concepts and technology advancements on CTBT monitoring. One of IVSEM`s unique features is that it integrates results from the various CTBT sensor technologies (seismic, infrasound, radionuclide, and hydroacoustic) and allows the user to investigate synergy among the technologies. Specifically, IVSEM estimates the detection effectiveness (probability of detection) and location accuracy of the integrated system and of each technology subsystem individually. The model attempts to accurately estimate the monitoring system`s performance at medium interfaces (air-land, air-water) and for some evasive testing methods such as seismic decoupling. This report describes version 1.2 of IVSEM.

  6. National Athletic Trainers' Association Position Statement: Management of Acute Skin Trauma

    Science.gov (United States)

    Beam, Joel W.; Buckley, Bernadette; Holcomb, William R.; Ciocca, Mario

    2016-01-01

    Objective: To present recommendations for the cleansing, debridement, dressing, and monitoring of acute skin trauma in patients. Background: Acute skin trauma is common during participation in athletic and recreational activities. Clinical decisions and intervention protocols after injury vary among athletic trainers and are often based on ritualistic practices. An understanding of cleansing, debridement, and dressing techniques; clinical features of infection and adverse reactions; and monitoring of acute skin trauma is critical for certified athletic trainers and other allied health and medical professionals to create a local wound environment that promotes healing and lessens the risk of complications. Recommendations: These guidelines are intended to provide the certified athletic trainer and others participating in athletic health care with specific knowledge about and recommendations for the management of acute skin trauma. PMID:28092169

  7. Em companhia do personal trainer: significados atribuídos pelos alunos ao atendimento personalizado

    Directory of Open Access Journals (Sweden)

    Maurício Leite da Silva

    2016-11-01

    Este estudo objetivou compreender os significados do atendimento do personal trainer para o respectivo aluno deste profissional. É uma pesquisa de cunho qualitativo que se sustenta na literatura especializada sobre as temáticas personal trainer e treinamento personalizado. O estudo se valeu da análise de conteúdo como método e da entrevista semiestruturada como ferramenta metodológica. Foram entrevistados sete alunos de treinadores personalizados de uma academia de ginástica da cidade de Cachoeirinha/RS, Brasil. Após a análise das entrevistas, foi possível compreender que o atendimento do personal trainer para os alunos entrevistados significa resultados rápidos, confiança e motivação.

  8. Validation study of a computer-based open surgical trainer: SimPraxis(®) simulation platform.

    Science.gov (United States)

    Tran, Linh N; Gupta, Priyanka; Poniatowski, Lauren H; Alanee, Shaheen; Dall'era, Marc A; Sweet, Robert M

    2013-01-01

    Technological advances have dramatically changed medical education, particularly in the era of work-hour restrictions, which increasingly highlights a need for novel methods to teach surgical skills. The purpose of this study was to evaluate the validity of a novel, computer-based, interactive, cognitive simulator for training surgeons to perform pelvic lymph node dissection (PLND). Eight prostate cancer experts evaluated the content of the simulator. Contextual aspects of the simulator were rated on a five-point Likert scale. The experts and nine first-year residents completed a simulated PLND. Time and deviations were logged, and the results were compared between experts and novices using the Mann-Whitney test. Before training, 88% of the experts felt that a validated simulator would be useful for PLND training. After testing, 100% of the experts felt that it would be more useful than standard video training. Eighty-eight percent stated that they would like to see the simulator in the curriculum of residency programs and 56% thought it would be useful for accreditation purposes. The experts felt that the simulator aided in overall understanding, training indications, concepts and steps of the procedure, training how to use an assistant, and enhanced the knowledge of anatomy. Median performance times taken by experts and interns to complete a PLND procedure on the simulator were 12.62 and 23.97 minutes, respectively. Median deviation from the incorporated procedure pathway for experts was 24.5 and was 89 for novices. We describe an interactive, computer-based simulator designed to assist in mastery of the cognitive steps of an open surgical procedure. This platform is intuitive and flexible, and could be applied to any stepwise medical procedure. Overall, experts outperformed novices in their performance on the trainer. Experts agreed that the content was acceptable, accurate, and representative.

  9. Face and content validity of the virtual reality simulator 'ScanTrainer®'.

    Science.gov (United States)

    Alsalamah, Amal; Campo, Rudi; Tanos, Vasilios; Grimbizis, Gregoris; Van Belle, Yves; Hood, Kerenza; Pugh, Neil; Amso, Nazar

    2017-01-01

    Ultrasonography is a first-line imaging in the investigation of women's irregular bleeding and other gynaecological pathologies, e.g. ovarian cysts and early pregnancy problems. However, teaching ultrasound, especially transvaginal scanning, remains a challenge for health professionals. New technology such as simulation may potentially facilitate and expedite the process of learning ultrasound. Simulation may prove to be realistic, very close to real patient scanning experience for the sonographer and objectively able to assist the development of basic skills such as image manipulation, hand-eye coordination and examination technique. The aim of this study was to determine the face and content validity of a virtual reality simulator (ScanTrainer®, MedaPhor plc, Cardiff, Wales, UK) as reflective of real transvaginal ultrasound (TVUS) scanning. A questionnaire with 14 simulator-related statements was distributed to a number of participants with differing levels of sonography experience in order to determine the level of agreement between the use of the simulator in training and real practice. There were 36 participants: novices ( n  = 25) and experts ( n  = 11) who rated the simulator. Median scores of face validity statements between experts and non-experts using a 10-point visual analogue scale (VAS) ratings ranged between 7.5 and 9.0 ( p  > 0.05) indicated a high level of agreement. Experts' median scores of content validity statements ranged from 8.4 to 9.0. The findings confirm that the simulator has the feel and look of real-time scanning with high face validity. Similarly, its tutorial structures and learning steps confirm the content validity.

  10. Runtime Verification Through Forward Chaining

    Directory of Open Access Journals (Sweden)

    Alan Perotti

    2014-12-01

    Full Text Available In this paper we present a novel rule-based approach for Runtime Verification of FLTL properties over finite but expanding traces. Our system exploits Horn clauses in implication form and relies on a forward chaining-based monitoring algorithm. This approach avoids the branching structure and exponential complexity typical of tableaux-based formulations, creating monitors with a single state and a fixed number of rules. This allows for a fast and scalable tool for Runtime Verification: we present the technical details together with a working implementation.

  11. K Basins Field Verification Program

    International Nuclear Information System (INIS)

    Booth, H.W.

    1994-01-01

    The Field Verification Program establishes a uniform and systematic process to ensure that technical information depicted on selected engineering drawings accurately reflects the actual existing physical configuration. This document defines the Field Verification Program necessary to perform the field walkdown and inspection process that identifies the physical configuration of the systems required to support the mission objectives of K Basins. This program is intended to provide an accurate accounting of the actual field configuration by documenting the as-found information on a controlled drawing

  12. Clinical anxiety among final year dental students: The trainers and students perspectives

    Directory of Open Access Journals (Sweden)

    A Obarisiagbon

    2013-01-01

    Full Text Available Background: The dental clinical setting, which is a significant learning environment for undergraduate dental students, may induce anxiety, which may adversely affect the clinical performance. The purpose of this cross-sectional study was to determine the factors provoking clinical anxiety in dental students from the trainers and students perspectives. Materials and Methods: This cross-sectional study was conducted among 6 th (final year dental students of University of Benin and their clinical trainers between January and March 2012 using the 38-item modified Moss and McManus clinical anxiety questionnaire. Results: Of the 67 participants, 32 (47.8% were 6 th year dental students while 35 (52.2% were clinical trainers. According to the students, the top clinical anxiety provoking situations were inability to meet requirements before exams, inability to pass the final exams, dealing with psychiatric patients, coping with uncooperative children, getting infected by patients, fracturing a tooth during extraction, extracting the wrong tooth, discovering calculus by the supervisor after scaling, accidental pulp exposure, inadvertently hurting patients and using the high speed hand piece. There existed concordance on the top two clinical anxiety provoking situations reported by the students and their clinical trainers. However, measuring blood pressure, taking pulse, presenting in the clinic, handling a syncopal attack, and accidental pulp exposure were statistically significant contrasting clinical anxiety provoking situations from dental students and trainers perspectives. Conclusion: Data from this study revealed that clinical trainers share largely the same perspectives with the dental students on the clinical anxiety provoking situations with slight variations. Fostering a supportive learning environment conducive to dental student learning by strengthen efforts to minimize clinical anxiety is a necessity.

  13. Examining the Experiences of Athletic Trainers as they transition into their First Full-Time Position

    Directory of Open Access Journals (Sweden)

    Stephanie M. Mazerolle

    2017-04-01

    Full Text Available Transition to clinical practice is an important topic in athletic training, as it can be a period of time that presents challenges for the athletic trainer. Most of the research pertaining to transition to practice focuses on the skills and knowledge necessary for clinical practice, yet we know that stress can manifest from not only being an independent practitioner but also from learning how to balance one’s roles. We wanted to understand the perspective of today’s novice athletic trainers and how they feel in their first full-time position, specifically relating to their professional development and establishment or maintenance of work-life balance (WLB. Using a qualitative paradigm, we phone interviewed athletic trainers who were categorized as career starters by the National Athletic Trainers’ Association. Using a purposive recruitment strategy we were able to recruit 20 (12 female, 8 male athletic trainers meeting this classification. General inductive analyses were used to code the data from our interviews, and we satisfied credibility though saturation of the data, peer review, and researcher triangulations during the coding process. Our findings suggest that while confidence in clinical skills is apparent, some of the more administrative aspects of clinical practice present challenges. We found that various employment settings offered various expectations or challenges that had the potential to impact WLB. A blend of professional and organizational processes helped transition the athletic trainer, and although both were helpful each also could be bolstered to improve transitioning for the newly credentialed athletic trainer. Employers of early career starters should be aware of the stress related to transition to practice, and the time it can take to acclimate.

  14. Monitoring/Verification Using DMS: TATP Example

    International Nuclear Information System (INIS)

    Kevin Kyle; Stephan Weeks

    2008-01-01

    Field-rugged and field-programmable differential mobility spectrometry (DMS) networks provide highly selective, universal monitoring of vapors and aerosols at detectable levels from persons or areas involved with illicit chemical/biological/explosives (CBE) production. CBE sensor motes used in conjunction with automated fast gas chromatography with DMS detection (GC/DMS) verification instrumentation integrated into situational operations management systems can be readily deployed and optimized for changing application scenarios. The feasibility of developing selective DMS motes for a 'smart dust' sampling approach with guided, highly selective, fast GC/DMS verification analysis is a compelling approach to minimize or prevent the illegal use of explosives or chemical and biological materials. DMS is currently one of the foremost emerging technologies for field separation and detection of gas-phase chemical species. This is due to trace-level detection limits, high selectivity, and small size. GC is the leading analytical method for the separation of chemical species in complex mixtures. Low-thermal-mass GC columns have led to compact, low-power field systems capable of complete analyses in 15-300 seconds. A collaborative effort optimized a handheld, fast GC/DMS, equipped with a non-rad ionization source, for peroxide-based explosive measurements

  15. Monitoring/Verification using DMS: TATP Example

    Energy Technology Data Exchange (ETDEWEB)

    Stephan Weeks, Kevin Kyle, Manuel Manard

    2008-05-30

    Field-rugged and field-programmable differential mobility spectrometry (DMS) networks provide highly selective, universal monitoring of vapors and aerosols at detectable levels from persons or areas involved with illicit chemical/biological/explosives (CBE) production. CBE sensor motes used in conjunction with automated fast gas chromatography with DMS detection (GC/DMS) verification instrumentation integrated into situational operations-management systems can be readily deployed and optimized for changing application scenarios. The feasibility of developing selective DMS motes for a “smart dust” sampling approach with guided, highly selective, fast GC/DMS verification analysis is a compelling approach to minimize or prevent the illegal use of explosives or chemical and biological materials. DMS is currently one of the foremost emerging technologies for field separation and detection of gas-phase chemical species. This is due to trace-level detection limits, high selectivity, and small size. Fast GC is the leading field analytical method for gas phase separation of chemical species in complex mixtures. Low-thermal-mass GC columns have led to compact, low-power field systems capable of complete analyses in 15–300 seconds. A collaborative effort optimized a handheld, fast GC/DMS, equipped with a non-rad ionization source, for peroxide-based explosive measurements.

  16. Monitoring/Verification Using DMS: TATP Example

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Kyle; Stephan Weeks

    2008-03-01

    Field-rugged and field-programmable differential mobility spectrometry (DMS) networks provide highly selective, universal monitoring of vapors and aerosols at detectable levels from persons or areas involved with illicit chemical/biological/explosives (CBE) production. CBE sensor motes used in conjunction with automated fast gas chromatography with DMS detection (GC/DMS) verification instrumentation integrated into situational operationsmanagement systems can be readily deployed and optimized for changing application scenarios. The feasibility of developing selective DMS motes for a “smart dust” sampling approach with guided, highly selective, fast GC/DMS verification analysis is a compelling approach to minimize or prevent the illegal use of explosives or chemical and biological materials. DMS is currently one of the foremost emerging technologies for field separation and detection of gas-phase chemical species. This is due to trace-level detection limits, high selectivity, and small size. GC is the leading analytical method for the separation of chemical species in complex mixtures. Low-thermal-mass GC columns have led to compact, low-power field systems capable of complete analyses in 15–300 seconds. A collaborative effort optimized a handheld, fast GC/DMS, equipped with a non-rad ionization source, for peroxide-based explosive measurements.

  17. DESIGN INFORMATION VERIFICATION FOR NUCLEAR SAFEGUARDS

    Energy Technology Data Exchange (ETDEWEB)

    Robert S. Bean; Richard R. M. Metcalf; Phillip C. Durst

    2009-07-01

    A critical aspect of international safeguards activities performed by the International Atomic Energy Agency (IAEA) is the verification that facility design and construction (including upgrades and modifications) do not create opportunities for nuclear proliferation. These Design Information Verification activities require that IAEA inspectors compare current and past information about the facility to verify the operator’s declaration of proper use. The actual practice of DIV presents challenges to the inspectors due to the large amount of data generated, concerns about sensitive or proprietary data, the overall complexity of the facility, and the effort required to extract just the safeguards relevant information. Planned and anticipated facilities will (especially in the case of reprocessing plants) be ever larger and increasingly complex, thus exacerbating the challenges. This paper reports the results of a workshop held at the Idaho National Laboratory in March 2009, which considered technologies and methods to address these challenges. The use of 3D Laser Range Finding, Outdoor Visualization System, Gamma-LIDAR, and virtual facility modeling, as well as methods to handle the facility data issues (quantity, sensitivity, and accessibility and portability for the inspector) were presented. The workshop attendees drew conclusions about the use of these techniques with respect to successfully employing them in an operating environment, using a Fuel Conditioning Facility walk-through as a baseline for discussion.

  18. Symposium on international safeguards: Verification and nuclear material security. Book of extended synopses. Addendum

    International Nuclear Information System (INIS)

    2001-01-01

    The symposium covered the topics related to international safeguards, verification and nuclear materials security, namely: verification and nuclear material security; the NPT regime: progress and promises; the Additional Protocol as an important tool for the strengthening of the safeguards system; the nuclear threat and the nuclear threat initiative. Eighteen sessions dealt with the following subjects: the evolution of IAEA safeguards ( including strengthened safeguards, present and future challenges; verification of correctness and completeness of initial declarations; implementation of the Additional Protocol, progress and experience; security of material; nuclear disarmament and ongoing monitoring and verification in Iraq; evolution of IAEA verification in relation to nuclear disarmament); integrated safeguards; physical protection and illicit trafficking; destructive analysis for safeguards; the additional protocol; innovative safeguards approaches; IAEA verification and nuclear disarmament; environmental sampling; safeguards experience; safeguards equipment; panel discussion on development of state systems of accountancy and control; information analysis in the strengthened safeguard system; satellite imagery and remote monitoring; emerging IAEA safeguards issues; verification technology for nuclear disarmament; the IAEA and the future of nuclear verification and security

  19. Symposium on international safeguards: Verification and nuclear material security. Book of extended synopses

    International Nuclear Information System (INIS)

    2001-01-01

    The symposium covered the topics related to international safeguards, verification and nuclear materials security, namely: verification and nuclear material security; the NPT regime: progress and promises; the Additional Protocol as an important tool for the strengthening of the safeguards system; the nuclear threat and the nuclear threat initiative. Eighteen sessions dealt with the following subjects: the evolution of IAEA safeguards (including strengthened safeguards, present and future challenges; verification of correctness and completeness of initial declarations; implementation of the Additional Protocol, progress and experience; security of material; nuclear disarmament and ongoing monitoring and verification in Iraq; evolution of IAEA verification in relation to nuclear disarmament); integrated safeguards; physical protection and illicit trafficking; destructive analysis for safeguards; the additional protocol; innovative safeguards approaches; IAEA verification and nuclear disarmament; environmental sampling; safeguards experience; safeguards equipment; panel discussion on development of state systems of accountancy and control; information analysis in the strengthened safeguard system; satellite imagery and remote monitoring; emerging IAEA safeguards issues; verification technology for nuclear disarmament; the IAEA and the future of nuclear verification and security

  20. Test/QA Plan for Verification of Radio Frequency Identification (RFID) for Tracking Hazardous Waste Shipments across International Borders

    Science.gov (United States)

    The verification test will be conducted under the auspices of the U.S. Environmental Protection Agency (EPA) through the Environmental Technology Verification (ETV) Program. It will be performed by Battelle, which is managing the ETV Advanced Monitoring Systems (AMS) Center throu...

  1. Two-Way Communication between Scientists and the Public: A View from Science Communication Trainers in North America

    Science.gov (United States)

    Yuan, Shupei; Oshita, Tsuyoshi; AbiGhannam, Niveen; Dudo, Anthony; Besley, John C.; Koh, Hyeseung E.

    2017-01-01

    The current study explores the degree to which two-way communication is applied in science communication contexts in North America, based on the experiences of science communication trainers. Interviews with 24 science communication trainers suggest that scientists rarely focus on applying two-way communication tactics, such as listening to their…

  2. Assessment of the Clinical Trainer as a Role Model: A Role Model Apperception Tool (RoMAT)

    NARCIS (Netherlands)

    Jochemsen-van der Leeuw, H. G. A. Ria; van Dijk, Nynke; Wieringa-de Waard, Margreet

    2014-01-01

    Purpose Positive role modeling by clinical trainers is important for helping trainees learn professional and competent behavior. The authors developed and validated an instrument to assess clinical trainers as role models: the Role Model Apperception Tool (RoMAT). Method On the basis of a 2011

  3. A train-the-trainer approach to a shared pharmacogenomics curriculum for US colleges and schools of pharmacy.

    Science.gov (United States)

    Lee, Kelly C; Ma, Joseph D; Hudmon, Karen Suchanek; Kuo, Grace M

    2012-12-12

    To assess pharmacy faculty trainers' perceptions of a Web-based train-the-trainer program for PharmGenEd, a shared pharmacogenomics curriculum for health professional students and licensed clinicians. Pharmacy faculty trainers (n=58, representing 39 colleges and schools of pharmacy in the United States and 1 school from Canada) participated in a train-the-trainer program consisting of up to 9 pharmacogenomics topics. Posttraining survey instruments assessed faculty trainers' perceptions toward the training program and the likelihood of their adopting the educational materials as part of their institution's curriculum. Fifty-five percent of faculty trainers reported no prior formal training in pharmacogenomics. There was a significant increase (ptrain licensed health professionals, and 95% indicated that they would recommend the program to other pharmacy faculty members. As a result of participating in the train-the-trainer program in pharmacogenomics, faculty member participants gained confidence in teaching pharmacogenomics to their students, and the majority of participants indicated a high likelihood of adopting the program at their institution. A Web-based train-the-trainer model appears to be a feasible strategy for training pharmacy faculty in pharmacogenomics.

  4. VERIFICATION OF PARALLEL AUTOMATA-BASED PROGRAMS

    OpenAIRE

    M. A. Lukin

    2014-01-01

    The paper deals with an interactive method of automatic verification for parallel automata-based programs. The hierarchical state machines can be implemented in different threads and can interact with each other. Verification is done by means of Spin tool and includes automatic Promela model construction, conversion of LTL-formula to Spin format and counterexamples in terms of automata. Interactive verification gives the possibility to decrease verification time and increase the maxi...

  5. Verification of safety critical software

    International Nuclear Information System (INIS)

    Son, Ki Chang; Chun, Chong Son; Lee, Byeong Joo; Lee, Soon Sung; Lee, Byung Chai

    1996-01-01

    To assure quality of safety critical software, software should be developed in accordance with software development procedures and rigorous software verification and validation should be performed. Software verification is the formal act of reviewing, testing of checking, and documenting whether software components comply with the specified requirements for a particular stage of the development phase[1]. New software verification methodology was developed and was applied to the Shutdown System No. 1 and 2 (SDS1,2) for Wolsung 2,3 and 4 nuclear power plants by Korea Atomic Energy Research Institute(KAERI) and Atomic Energy of Canada Limited(AECL) in order to satisfy new regulation requirements of Atomic Energy Control Boars(AECB). Software verification methodology applied to SDS1 for Wolsung 2,3 and 4 project will be described in this paper. Some errors were found by this methodology during the software development for SDS1 and were corrected by software designer. Outputs from Wolsung 2,3 and 4 project have demonstrated that the use of this methodology results in a high quality, cost-effective product. 15 refs., 6 figs. (author)

  6. Hot cell verification facility update

    International Nuclear Information System (INIS)

    Titzler, P.A.; Moffett, S.D.; Lerch, R.E.

    1985-01-01

    The Hot Cell Verification Facility (HCVF) provides a prototypic hot cell mockup to check equipment for functional and remote operation, and provides actual hands-on training for operators. The facility arrangement is flexible and assists in solving potential problems in a nonradioactive environment. HCVF has been in operation for six years, and the facility is a part of the Hanford Engineering Development Laboratory

  7. Eggspectation : organic egg verification tool

    NARCIS (Netherlands)

    Ruth, van S.M.; Hoogenboom, L.A.P.

    2011-01-01

    In 2009 RIKILT conducted a study on about 2,000 eggs to evaluate three different analytical verification methods: carotenoid profiling, fatty acid profiling and isotope ratio mass spectrometry. The eggs were collected from about 50 Dutch farms. The selection was based on the farms’ location and

  8. Static Verification for Code Contracts

    Science.gov (United States)

    Fähndrich, Manuel

    The Code Contracts project [3] at Microsoft Research enables programmers on the .NET platform to author specifications in existing languages such as C# and VisualBasic. To take advantage of these specifications, we provide tools for documentation generation, runtime contract checking, and static contract verification.

  9. Runtime Verification in Distributed Computing

    NARCIS (Netherlands)

    Malakuti Khah Olun Abadi, Somayeh; Park, Jong Hyuk; Obaidat, Mohammad; Aksit, Mehmet; Bockisch, Christoph

    2011-01-01

    Runtime verification aims to check whether an application executes its behaviour as specified. Thereby the active execution trace of an application is checked in terms of the actual execution context; diagnosis and, possibly, recovery actions are taken when the specification is violated. In today’s

  10. Automated Verification of Virtualized Infrastructures

    DEFF Research Database (Denmark)

    Bleikertz, Sören; Gross, Thomas; Mödersheim, Sebastian Alexander

    2011-01-01

    Virtualized infrastructures and clouds present new challenges for security analysis and formal verification: they are complex environments that continuously change their shape, and that give rise to non-trivial security goals such as isolation and failure resilience requirements. We present a pla...

  11. Verification and validation for CIPRNet

    NARCIS (Netherlands)

    Voogd, J.

    2016-01-01

    In this chapter it is shown that if an appreciable risk is present in the use of Modelling and Simulation (M&S), Verification and Validation (V&V) should be employed to manage and mitigate that risk. The use of M&S in the domain of critical infrastructure (CI) will always be accompanied by such a

  12. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  13. Exploring the Possible Use of Information Barriers for future Biological Weapons Verification Regimes

    Energy Technology Data Exchange (ETDEWEB)

    Luke, S J

    2011-12-20

    This report describes a path forward for implementing information barriers in a future generic biological arms-control verification regime. Information barriers have become a staple of discussion in the area of arms control verification approaches for nuclear weapons and components. Information barriers when used with a measurement system allow for the determination that an item has sensitive characteristics without releasing any of the sensitive information. Over the last 15 years the United States (with the Russian Federation) has led on the development of information barriers in the area of the verification of nuclear weapons and nuclear components. The work of the US and the Russian Federation has prompted other states (e.g., UK and Norway) to consider the merits of information barriers for possible verification regimes. In the context of a biological weapons control verification regime, the dual-use nature of the biotechnology will require protection of sensitive information while allowing for the verification of treaty commitments. A major question that has arisen is whether - in a biological weapons verification regime - the presence or absence of a weapon pathogen can be determined without revealing any information about possible sensitive or proprietary information contained in the genetic materials being declared under a verification regime. This study indicates that a verification regime could be constructed using a small number of pathogens that spans the range of known biological weapons agents. Since the number of possible pathogens is small it is possible and prudent to treat these pathogens as analogies to attributes in a nuclear verification regime. This study has determined that there may be some information that needs to be protected in a biological weapons control verification regime. To protect this information, the study concludes that the Lawrence Livermore Microbial Detection Array may be a suitable technology for the detection of the

  14. A study of applications scribe frame data verifications using design rule check

    Science.gov (United States)

    Saito, Shoko; Miyazaki, Masaru; Sakurai, Mitsuo; Itoh, Takahisa; Doi, Kazumasa; Sakurai, Norioko; Okada, Tomoyuki

    2013-06-01

    In semiconductor manufacturing, scribe frame data generally is generated for each LSI product according to its specific process design. Scribe frame data is designed based on definition tables of scanner alignment, wafer inspection and customers specified marks. We check that scribe frame design is conforming to specification of alignment and inspection marks at the end. Recently, in COT (customer owned tooling) business or new technology development, there is no effective verification method for the scribe frame data, and we take a lot of time to work on verification. Therefore, we tried to establish new verification method of scribe frame data by applying pattern matching and DRC (Design Rule Check) which is used in device verification. We would like to show scheme of the scribe frame data verification using DRC which we tried to apply. First, verification rules are created based on specifications of scanner, inspection and others, and a mark library is also created for pattern matching. Next, DRC verification is performed to scribe frame data. Then the DRC verification includes pattern matching using mark library. As a result, our experiments demonstrated that by use of pattern matching and DRC verification our new method can yield speed improvements of more than 12 percent compared to the conventional mark checks by visual inspection and the inspection time can be reduced to less than 5 percent if multi-CPU processing is used. Our method delivers both short processing time and excellent accuracy when checking many marks. It is easy to maintain and provides an easy way for COT customers to use original marks. We believe that our new DRC verification method for scribe frame data is indispensable and mutually beneficial.

  15. Methods of Verification, Accountability and Control of Special Nuclear Material

    International Nuclear Information System (INIS)

    Stewart, J.E.

    1999-01-01

    This session demonstrates nondestructive assay (NDA) measurement, surveillance and analysis technology required to protect, control and account (MPC and A) for special nuclear materials (SNM) in sealed containers. These measurements, observations and analyses comprise state-of-the art, strengthened, SNM safeguards systems. Staff member specialists, actively involved in research, development, training and implementation worldwide, will present six NDA verification systems and two software tools for integration and analysis of facility MPC and A data

  16. Experimental verification of internal dosimetry calculations. Annual progress report

    International Nuclear Information System (INIS)

    1980-05-01

    During the past year a dosimetry research program has been established in the School of Nuclear Engineering at the Georgia Institute of Technology. The major objective of this program has been to provide research results upon which a useful internal dosimetry system could be based. The important application of this dosimetry system will be the experimental verification of internal dosimetry calculations such as those published by the MIRD Committee

  17. The Modified Readiness for Interprofessional Learning Scale in Currently Practicing Athletic Trainers

    Science.gov (United States)

    Welsch, Lauren A.; Rutledge, Carolyn; Hoch, Johanna M.

    2017-01-01

    Context: Athletic trainers are encouraged to work collaboratively with other health care professionals to improve patient outcomes. Interprofessional education (IPE) experiences for practicing clinicians should be developed to improve interprofessional collaborative practice postcertification. An outcome measure, such as the modified Readiness for…

  18. The Teacher Trainer: A Practical Journal for Those Who Train, Mentor and Educate TESOL Teachers, 2002.

    Science.gov (United States)

    Woodward, Tessa, Ed.

    2002-01-01

    These three journal issues include the following articles: "Competence in Facilitation" (Graham O'Connel); "Is My Map to Scale?" (Mark Wilson); "A Trainer's Dozen" (Barbara Thornton and Mary Lou McCloskey); "Carrot Ice Cream: Reactions to the New or Different" (Tessa Woodward); "Feeding (back to) the…

  19. Injured Athletes' Perceived Loss of Identity: Educational Implications for Athletic Trainers

    Science.gov (United States)

    Lockhart, Barbara D.

    2010-01-01

    Context: As educators, athletic trainers should familiarize athletes with the concepts of self acceptance self-esteem and identity to assuage psychological trauma accompanying injury because the more a person identifies with being an athlete, the more difficult it is to deal with athletic injury. Objective: The objective of this article is to…

  20. Women's Human Rights Education Trainers in Turkey: Situated Empowerment for Social Change

    Science.gov (United States)

    Tibbitts, Felisa L.

    2016-01-01

    This article presents evidence of the links between human rights education and social change by analyzing the long-term effects on 88 trainers engaged in a non-formal adult training program sponsored by a women's human rights group in Turkey, Women for Women's Human Rights--New Ways. In this article, I show the transformative impacts of carrying…

  1. 77 FR 39741 - Solicitation for a Cooperative Agreement-Curricula Review and Revision: NIC Trainer Development...

    Science.gov (United States)

    2012-07-05

    ... the knowledge, skills, and abilities needed to train and develop their staff. DATES: Application must... ``Training Design and Development,'' ``Foundation Skills for Trainers,'' ``Building Agency Success... throughout the country. Staff development divisions have been hit particularly hard by budget cuts, and...

  2. Cross-cultural communication capabilities of U.S. military trainers: host nation perspective.

    Science.gov (United States)

    Mahmood, Maysaa; Alameri, Ali; Jawad, Shakir; Alani, Yasir; Zuerlein, Scott; Nakano, Gregg; Anderson, Warner; Beadling, Charles

    2013-06-01

    A survey was conducted to assess trainee perception of the cross-cultural communication competency of U.S. military trainers and their satisfaction with the training they received. Findings from the survey show that U.S. military trainers rely significantly on local interpreters. This indicates variability in the ability of the trainers to communicate effectively with host nation partners, the variability being dependent on the capabilities of the individual interpreter. The findings illustrate the importance of providing military health personnel with training on how to work effectively with interpreters. The use of supplementary resources such as electronic translation devises when the interpreter is not capable of conveying health-related training information with the desired level of accuracy is recommended. Expanding the availability of general cultural training, which provides baseline information on local values, traditions, and customs in addition to health-specific cultural orientation, is also recommended to help military health trainers customize their training content and methods to fit the local environment. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.

  3. Presentation Trainer: a toolkit for learning non-verbal public speaking skills

    NARCIS (Netherlands)

    Schneider, Jan; Börner, Dirk; Van Rosmalen, Peter; Specht, Marcus

    2014-01-01

    The paper presents and outlines the demonstration of Presentation Trainer, a prototype that works as a public speaking instructor. It tracks and analyses the body posture, movements and voice of the user in order to give in- structional feedback on non-verbal communication skills. Besides exploring

  4. Current Evaluation Practices of Diversity Trainers in German-Speaking Countries

    Science.gov (United States)

    Rohmann, Anette; Froncek, Benjamin; Mazziotta, Agostino; Piper, Verena

    2017-01-01

    Diversity training has been greatly expanded in recent years in order to help people deal with the challenges of increased social diversity. However, little is known about the systematic evaluation of diversity training. The present research surveyed 172 diversity trainers concerning their evaluation practices with regard to diversity training.…

  5. Exploring Trainer and Trainee Emotional Talk in Narratives about Workplace-Based Feedback Processes

    Science.gov (United States)

    Dennis, A. A.; Foy, M. J.; Monrouxe, L. V.; Rees, C. E.

    2018-01-01

    Emotion characterises learners' feedback experiences. While the failure-to-fail literature suggests that emotion may be important, little is known about the role of emotion for educators. Secondary analyses were therefore conducted on data exploring 110 trainers' and trainees' feedback experiences. Group and individual narrative interviews were…

  6. Model Curriculum And Trainer's Guide for Programs to Combat White-Collar Crime.

    Science.gov (United States)

    Karchmer, Clifford L.

    This model curriculum is addressed to the training needs of personnel working in general white-collar crime assignments located in state and local police or prosecutors' offices. It is designed intentionally to orient personnel to the requirements of building a case as it moves along the enforcement process. Materials on trainer use and…

  7. Pengembangan alat tempo trainer untuk membantu efisiensi gerakan lengan gaya bebas cabang olahraga renang

    Directory of Open Access Journals (Sweden)

    Bahtiyar Heru Susanto

    2017-09-01

    This research aimed to develop the tools of Tempo Trainer to help efficiency of arm freestyle movement on the branch of swimming. Small-scale trials were conducted on four coaches and 10 athletes in the swimming association Tirta Alvita and Yuso. Large-scale trial was conducted on 10 coaches and 25 athletes in the swimming association Tirta Alvita, Yuso, Dolphin, Caesar, and Arowana. The instrument used to collect data was a questionnaire based on the analysis PIECES (Performance, Information, Economic, Control, Efficiency, Services. The assessment result of experts, coaches, and athletes toward Tempo Trainer tool shows that the assessment categoryis good, valid and reliable. Based of the resultsthat Tempo Trainer tool developed can count the number of cycles of freestyle movement, a sound that can be heard by coaches and athletes, can be used for more than one athlete, as well as it is more affordable. The coaches assessment shows valid results with every indicator PIECES obtain value rxy > r table = 0.632, with reliable results rxy = 0.908. The assessment of Tempo Trainer draft tool by athletes is good and valid with the result of the rxy > r table = 0.750.

  8. The most effective way of delivering a Train-the-Trainers program: A systematic review

    NARCIS (Netherlands)

    Pearce, Jennifer; Mann, Mala K.; Jones, Caryl; van Buschbach, Susanne; Olff, Miranda; Bisson, Jonathan I.

    2012-01-01

    Introduction: Previous literature has shown that multifaceted, interactive interventions may be the most effective way to train health and social care professionals. A Train-the-Trainer (TTT) model could incorporate all these components. We conducted a systematic review to determine the overall

  9. Comparison of muscle activation during elliptical trainer, treadmill and bike exercise

    Directory of Open Access Journals (Sweden)

    H Sözen

    2010-09-01

    Full Text Available The purpose of this study is to compare muscle activation during elliptical trainer (ET, treadmill (TM and bike (B exercise. Twenty three voluntary and healthy male athletes (age, 20.65±1.65 years; weight, 74.21±7.21 kg; height, 180.69±5.31 cm; Body Mass Index, 22.4±1.5 participated in our study. Study protocol was decided for three days. Measures were taken by using elliptical trainer on the first day, treadmill on the second day and bicycle device on the third. Exercise devices were run with 65�0metabolic pulse for six minutes and at the end of the sixth minute, surface electrodes were placed on Biceps Brachii, Triceps Brachii, Pectoralis Major and Trapezius of upper extremity muscle and on Gastrocnemius, Vastus Lateralis, Rectus Femoris and Gluteus Maximus of lower extremity muscles and Electromyography (EMG activities were measured. According to the finding of the study, it has been found out that all of the measured upper extremity muscle were more activated by elliptical trainer compared to treadmill and bike exercise (p0.05. In conclusion, due to the advantage of more upper extremity muscle activation, it has been thought that elliptical trainer is a device to be able to be used in rehabilitation and exercise science.

  10. Insect Identification Educational Volunteers Created in Train-the-Trainer Workshops in Oregon and Washington

    Science.gov (United States)

    Corp, Mary K.; Rondon, Silivia I.; Van Vleet, Stephen M.

    2013-01-01

    The "train-the-trainer" model successfully created volunteer educators in insect identification. Intensive training programs prepared 71 individuals during 2 1/2-day (20 hour) training sessions. Trainees included university Extension faculty (13), agricultural professionals (13), and certified Master Gardeners (45). The sessions were…

  11. 24 CFR 3286.309 - Continuing education-trainers and curriculum.

    Science.gov (United States)

    2010-04-01

    ... curriculum. 3286.309 Section 3286.309 Housing and Urban Development Regulations Relating to Housing and Urban...-Administered States § 3286.309 Continuing education-trainers and curriculum. (a) HUD-mandated elements. Only... number of hours and the required curriculum for such subject areas, according to experience with the...

  12. Learning results of GP trainers in a blended learning course on EBM: a cohort study

    NARCIS (Netherlands)

    te Pas, Ellen; Wieringa-de Waard, Margreet; de Ruijter, Wouter; van Dijk, Nynke

    2015-01-01

    General practitioners (GPs) experience barriers to the use of evidence-based medicine (EBM) related to a negative attitude and to insufficient knowledge and skills. We therefore designed a blended learning intervention to develop the competence of GP trainers in EBM. This study investigated the

  13. Trainers Attitudes towards the Teaching of AIDS Education in a Kenyan Teachers' College

    Science.gov (United States)

    Nzau, K. A.; Ondimu, K. A.; Gikuhi, C. W.

    2012-01-01

    The purpose of this study was to examine the teaching of AIDS education. The study was mainly concerned with the implementation of the AIDS education curriculum. In particular the study sought to investigate the attitudes held by trainers and trainees towards the subject and make suggestions to improve its teaching. The study was conducted in a…

  14. Attitudes toward the health of men that regularly occupy in a trainer hall.

    Directory of Open Access Journals (Sweden)

    Adamchhuk Ja.

    2012-02-01

    Full Text Available It is accepted to consider that by motivation for people that practice in a trainer hall is an improvement of health and original appearance. The aim of this research was to determine whether there is training by part of forming of positive attitude toward the health of men-sportsmen-amateurs that occupy in a trainer hall. In research took part 100 men that engage in the power training in one of three trainer halls of Warsaw. Investigational divided by two groups: 50 persons that occupy in a trainer hall more than one year, but no more than 3 years (group A and 50 persons that practice more than 3 (group B. It is well-proven that training positively influences on the emotional state of men. It was discovered at the same time, that than greater experience of sportsman-amateur, the considerably more often he used additions (including by a stimulant. There was no medical control in both groups. Positive influence of the power training shows that they can be the important element of prophylaxis and physiotherapy.

  15. Realism of procedural task trainers in a pediatric emergency medicine procedures course

    Directory of Open Access Journals (Sweden)

    Allan Shefrin

    2015-04-01

    Conclusions: Task training models utilized in our course received variable realism ratings. When deciding what type of task trainer to use future courses should carefully consider the desired aspect of realism, and how it aligns with the procedural skill, balanced with cost considerations.

  16. Core characteristics of the competent general practice trainer, a Delphi study

    NARCIS (Netherlands)

    Boendermaker, P.M.; Schuling, J.; Meyboom-de Jong, B.; Zwierstra, R.P.; Metz, J.C.; Conradi, Mark

    2003-01-01

    Introduction: The specific skills, attitude, knowledge, and personality characteristics, which should define the competent GP-trainer have been subject of research for many years. What are the most important of these characteristics have yet to be delineated. Aim: The aim of this study is to

  17. A Statewide Train-the-Trainer Model for Effective Entrepreneurship and Workforce Readiness Programming

    Science.gov (United States)

    Fields, Nia Imani; Brown, Mananmi; Piechocinski, Alganesh; Wells, Kendra

    2012-01-01

    A statewide youth and adult train-the-trainer model that integrates workforce readiness and entrepreneurship can have a profound effect on young people's academic performance, interest in college, and overall youth development. Participants in workforce and entrepreneurship programs develop personal resources that have value in school, in the…

  18. Intention to use sport concussion guidelines among community-level coaches and sports trainers.

    Science.gov (United States)

    Newton, Joshua D; White, Peta E; Ewing, Michael T; Makdissi, Michael; Davis, Gavin A; Donaldson, Alex; Sullivan, S John; Seward, Hugh; Finch, Caroline F

    2014-09-01

    Sporting bodies have developed guidelines for managing community-level players with suspected concussion in response to international consensus statements on concussion in sport. The purpose of this study was to examine the factors that influence the intended use of concussion guidelines among community-level coaches and sports trainers from two popular football codes in Australia: Australian football and rugby league. Cross-sectional survey. The survey, based on an extended theory of planned behaviour model, was completed by 183 Australian football coaches, 121 Australian football sports trainers, 171 rugby league coaches, and 142 rugby league sports trainers. Personal norms and self-efficacy were significant predictors of intention to use concussion guidelines, although the relationship between self-efficacy and intention was stronger among Australian football coaches than rugby league coaches. Analysis of the salient beliefs that underpin self-efficacy found that coaches, irrespective of football code, felt less familiar (χ(2)=25.70, psports trainers in using the concussion guidelines. At the same time, Australian football personnel, irrespective of their team role, felt that they had insufficient time (χ(2)=8.04, psport concussion guidelines should focus on enhancing self-efficacy and leveraging personal norms. Increasing coaches' familiarity and experience in using the concussion guidelines would also be warranted, as would finding ways to overcome the perceived time and resource constraints identified among Australian football personnel. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  19. Synergies across verification regimes: Nuclear safeguards and chemical weapons convention compliance

    International Nuclear Information System (INIS)

    Kadner, Steven P.; Turpen, Elizabeth

    2001-01-01

    In the implementation of all arms control agreements, accurate verification is essential. In setting a course for verifying compliance with a given treaty - whether the NPT or the CWC, one must make a technical comparison of existing information-gathering capabilities against the constraints in an agreement. Then it must be decided whether this level of verifiability is good enough. Generally, the policy standard of 'effective verification' includes the ability to detect significant violations, with high confidence, in sufficient time to respond effectively with policy adjustments or other responses, as needed. It is at this juncture where verification approaches have traditionally diverged. Nuclear safeguards requirements have taken one path while chemical verification methods have pursued another. However, recent technological advances have brought a number of changes affecting verification, and lately their pace has been accelerating. First, all verification regimes have more and better information as a result of new kinds of sensors, imagery, and other technologies. Second, the verification provisions in agreements have also advanced, to include on-site inspections, portal monitoring, data exchanges, and a variety of transparency, confidence-building, and other cooperative measures, Together these developments translate into a technological overlap of certain institutional verification measures such as the NPT's safeguards requirements and the IAEA and the CWC's verification visions and the OPCW. Hence, a priority of international treaty-implementing organizations is exploring the development of a synergistic and coordinated approach to WMD policy making that takes into account existing inter-linkages between nuclear, chemical, and biological weapons issues. Specific areas of coordination include harmonizing information systems and information exchanges and the shared application of scientific mechanisms, as well as collaboration on technological developments

  20. Design, Implementation, and Verification of the Reliable Multicast Protocol. Thesis

    Science.gov (United States)

    Montgomery, Todd L.

    1995-01-01

    This document describes the Reliable Multicast Protocol (RMP) design, first implementation, and formal verification. RMP provides a totally ordered, reliable, atomic multicast service on top of an unreliable multicast datagram service. RMP is fully and symmetrically distributed so that no site bears an undue portion of the communications load. RMP provides a wide range of guarantees, from unreliable delivery to totally ordered delivery, to K-resilient, majority resilient, and totally resilient atomic delivery. These guarantees are selectable on a per message basis. RMP provides many communication options, including virtual synchrony, a publisher/subscriber model of message delivery, a client/server model of delivery, mutually exclusive handlers for messages, and mutually exclusive locks. It has been commonly believed that total ordering of messages can only be achieved at great performance expense. RMP discounts this. The first implementation of RMP has been shown to provide high throughput performance on Local Area Networks (LAN). For two or more destinations a single LAN, RMP provides higher throughput than any other protocol that does not use multicast or broadcast technology. The design, implementation, and verification activities of RMP have occurred concurrently. This has allowed the verification to maintain a high fidelity between design model, implementation model, and the verification model. The restrictions of implementation have influenced the design earlier than in normal sequential approaches. The protocol as a whole has matured smoother by the inclusion of several different perspectives into the product development.

  1. Variations in area-level disadvantage of Australian registered fitness trainers usual training locations

    Directory of Open Access Journals (Sweden)

    Jason A. Bennie

    2016-07-01

    Full Text Available Abstract Background Leisure-time physical activity and strength training participation levels are low and socioeconomically distributed. Fitness trainers (e.g. gym/group instructors may have a role in increasing these participation levels. However, it is not known whether the training location and characteristics of Australian fitness trainers vary between areas that differ in socioeconomic status. Methods In 2014, a sample of 1,189 Australian trainers completed an online survey with questions about personal and fitness industry-related characteristics (e.g. qualifications, setting, and experience and postcode of their usual training location. The Australian Bureau of Statistics ‘Index of Relative Socioeconomic Disadvantage’ (IRSD was matched to training location and used to assess where fitness professionals trained and whether their experience, qualification level and delivery methods differed by area-level disadvantage. Linear regression analysis was used to examine the relationship between IRSD score and selected characteristics adjusting for covariates (e.g. sex, age. Results Overall, 47 % of respondents worked in areas within the three least-disadvantaged deciles. In contrast, only 14.8 % worked in the three most-disadvantaged deciles. In adjusted regression models, fitness industry qualification was positively associated with a higher IRSD score (i.e. working in the least-disadvantaged areas (Cert III: ref; Cert IV β:13.44 [95 % CI 3.86-23.02]; Diploma β:15.77 [95 % CI: 2.17-29.37]; Undergraduate β:23.14 [95 % CI: 9.41-36.86]. Conclusions Fewer Australian fitness trainers work in areas with high levels of socioeconomic disadvantaged areas than in areas with low levels of disadvantage. A higher level of fitness industry qualifications was associated with working in areas with lower levels of disadvantage. Future research should explore the effectiveness of providing incentives that encourage more fitness trainers and those with

  2. Training the Trainers of Tomorrow Today - driving excellence in medical education.

    Science.gov (United States)

    Fellow-Smith, Elizabeth; Beveridge, Ed; Hogben, Katy; Wilson, Graeme; Lowe, John; Abraham, Rachel; Ingle, Digby; Bennett, Danielle; Hernandez, Carol

    2013-01-01

    Training the Trainers of Tomorrow Today (T4) is a new way to deliver "Training for Trainers". Responding to local dissatisfaction with existing arrangements, T4 builds on 3 essential requirements for a future shape of training: 1. Clinical Leadership and a Collaborative Approach 2. Cross-Specialty Design and Participation 3. Local Delivery and Governance Networks Design principles also included: 3 levels of training to reflect differing needs of clinical supervisors, educational supervisors and medical education leader, mapping to GMC requirements and the London Deanery's Professional Development Framework; alignment of service, educational theory and research; recognition of challenges in delivering and ensuring attendance in busy acute and mental health settings, and the development of a faculty network. The delivery plan took into account census of professional development uptake and GMC Trainee Surveys. Strong engagement and uptake from the 11 Trusts in NW London has been achieved, with powerful penetration into all specialties. Attendance has exceeded expectations. Against an initial 12 month target of 350 attendances, 693 were achieved in the first 8 months. Evaluation of content demonstrates modules are pitched appropriately to attendees needs, with positive feedback from trainers new to the role. Delivery style has attracted high ratings of satisfaction: 87% attendees rating delivery as "good\\excellent". External evaluation of impact demonstrated improved training experiences through changes in supervision, the learning environment and understanding of learning styles. We have addressed sustainability of the programme by advertising and recruiting Local Faculty Development Trainers. Volunteer consultants and higher trainees are trained to deliver the programme on a cascade model, supported by the Specialty Tutors, individual coaching and educational bursaries. The Trainers are local champions for excellence in training, provide a communication between the

  3. Variations in area-level disadvantage of Australian registered fitness trainers usual training locations.

    Science.gov (United States)

    Bennie, Jason A; Thornton, Lukar E; van Uffelen, Jannique G Z; Banting, Lauren K; Biddle, Stuart J H

    2016-07-11

    Leisure-time physical activity and strength training participation levels are low and socioeconomically distributed. Fitness trainers (e.g. gym/group instructors) may have a role in increasing these participation levels. However, it is not known whether the training location and characteristics of Australian fitness trainers vary between areas that differ in socioeconomic status. In 2014, a sample of 1,189 Australian trainers completed an online survey with questions about personal and fitness industry-related characteristics (e.g. qualifications, setting, and experience) and postcode of their usual training location. The Australian Bureau of Statistics 'Index of Relative Socioeconomic Disadvantage' (IRSD) was matched to training location and used to assess where fitness professionals trained and whether their experience, qualification level and delivery methods differed by area-level disadvantage. Linear regression analysis was used to examine the relationship between IRSD score and selected characteristics adjusting for covariates (e.g. sex, age). Overall, 47 % of respondents worked in areas within the three least-disadvantaged deciles. In contrast, only 14.8 % worked in the three most-disadvantaged deciles. In adjusted regression models, fitness industry qualification was positively associated with a higher IRSD score (i.e. working in the least-disadvantaged areas) (Cert III: ref; Cert IV β:13.44 [95 % CI 3.86-23.02]; Diploma β:15.77 [95 % CI: 2.17-29.37]; Undergraduate β:23.14 [95 % CI: 9.41-36.86]). Fewer Australian fitness trainers work in areas with high levels of socioeconomic disadvantaged areas than in areas with low levels of disadvantage. A higher level of fitness industry qualifications was associated with working in areas with lower levels of disadvantage. Future research should explore the effectiveness of providing incentives that encourage more fitness trainers and those with higher qualifications to work in more socioeconomically

  4. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  5. Formal Verification of Continuous Systems

    DEFF Research Database (Denmark)

    Sloth, Christoffer

    2012-01-01

    The purpose of this thesis is to develop a method for verifying timed temporal properties of continuous dynamical systems, and to develop a method for verifying the safety of an interconnection of continuous systems. The methods must be scalable in the number of continuous variables...... to the high complexity of both the dynamical system and the specification. Therefore, there is a need for methods capable of verifying complex specifications of complex systems. The verification of high dimensional continuous dynamical systems is the key to verifying general systems. In this thesis......, an abstraction approach is taken to the verification problem. A method is developed for abstracting continuous dynamical systems by timed automata. This method is based on subdividing the state space into cells by use of subdivisioning functions that are decreasing along the vector field. To allow...

  6. Test/QA Plan For Verification Of Anaerobic Digester For Energy Production And Pollution Prevention

    Science.gov (United States)

    The ETV-ESTE Program conducts third-party verification testing of commercially available technologies that improve the environmental conditions in the U.S. A stakeholder committee of buyers and users of such technologies guided the development of this test on anaerobic digesters...

  7. SharePoint Server 2010 Administration 24 Hour Trainer

    CERN Document Server

    Crider, Bill; Richardson, Clint

    2012-01-01

    Get quickly up to speed on SharePoint Server 2010! Covering all aspects of the SharePoint technology, this unique book-and-DVD combination provides expert guidance within each lesson in the book, which is then supplemented on the instructional DVD. The authors expose you to a variety of SharePoint Server 2010 topics, from organization concerns to training plans to programmer best practices, all aimed at helping you effortlessly find your way around SharePoint without a deep knowledge of the technology. You’ll quickly learn to configure and administer a site or site collection using this

  8. MUSE WFM AO Science Verification

    Science.gov (United States)

    Leibundgut, B.; Bacon, R.; Jaffé, Y. L.; Johnston, E.; Kuntschner, H.; Selman, F.; Valenti, E.; Vernet, J.; Vogt, F.

    2017-12-01

    The goal of Science Verification (SV) as part of the transition into operations is to carry out scientific observations to test the end-to-end operations of a new instrument or new instrument modes. The Multi Unit Spectroscopic Explorer, (MUSE; Bacon et al., 2010), at the Very Large Telescope (VLT) can be operated in several modes. The wide-field mode has been offered since Period 94 (October 2014) for natural-seeing observations. With the commissioning of the Adaptive Optics Facility (AOF; Arsenault et al., 2017) the wide-field mode can be supported by ground-layer adaptive optics through four artificial laser guide stars and the adaptive optics module, Ground Atmospheric Layer Adaptive OptiCs for Spectroscopic Imaging (GALACSI). The MUSE wide-field mode adaptive optics Science Verification (hereafter referred to MUSE WFM AO SV) was scheduled from 12–14 August 2017. Out of 41 submitted proposals, 19 observing programmes were scheduled, covering a wide range of science topics and amounting to an allocation of 42 hours. This included sufficient oversubscription to cover all expected observing conditions. Due to inclement weather during the original SV nights, two more nights were allocated on 16 and 17 September 2017 to observe more programmes. In total, seven programmes were completed, six programmes received partial data, and the remaining six projects could not be started. We summarise here the planning, execution and first results from the Science Verification.

  9. Verification of industrial x-ray machine: MINTs experience

    International Nuclear Information System (INIS)

    Aziz Amat; Saidi Rajab; Eesan Pasupathi; Saipo Bahari Abdul Ratan; Shaharudin Sayuti; Abd Nassir Ibrahim; Abd Razak Hamzah

    2005-01-01

    Radiation and electrical safety of the industrial x-ray equipment required to meet Atomic Energy Licensing Board(AELB) guidelines ( LEM/TEK/42 ) at the time of installation and subsequently a periodic verification should be ensured. The purpose of the guide is to explain the requirements employed in conducting the test on industrial x-ray apparatus and be certified in meeting with our local legislative and regulation. Verification is aimed to provide safety assurance information on electrical requirements and the minimum radiation exposure to the operator. This regulation is introduced on new models imported into the Malaysian market. Since June, 1997, Malaysian Institute for Nuclear Technology Research (MINT) has been approved by AELB to provide verification services to private company, government and corporate body throughout Malaysia. Early January 1997, AELB has made it mandatory that all x-ray equipment for industrial purpose (especially Industrial Radiography) must fulfill certain performance test based on the LEM/TEK/42 guidelines. MINT as the third party verification encourages user to improve maintenance of the equipment. MINT experiences in measuring the performance on intermittent and continuous duty rating single-phase industrial x-ray machine in the year 2004 indicated that all of irradiating apparatus tested pass the test and met the requirements of the guideline. From MINT record, 1997 to 2005 , three x-ray models did not meet the requirement and thus not allowed to be used unless the manufacturers willing to modify it to meet AELB requirement. This verification procedures on electrical and radiation safety on industrial x-ray has significantly improved the the maintenance cultures and safety awareness in the usage of x-ray apparatus in the industrial environment. (Author)

  10. Small Scale Charcoal Making: A Manual for Trainers.

    Science.gov (United States)

    Karch, Ed; And Others

    This training program offers skills training in all stages of the development of technologies related to small-scale charcoal production, including the design, construction, operation, maintenance, repair, and evaluation of prototype kilns. The kiln designs are selected to be as consistent as possible with the realities of rural areas in…

  11. SEMI-AUTOMATIC SPEAKER VERIFICATION SYSTEM

    Directory of Open Access Journals (Sweden)

    E. V. Bulgakova

    2016-03-01

    Full Text Available Subject of Research. The paper presents a semi-automatic speaker verification system based on comparing of formant values, statistics of phone lengths and melodic characteristics as well. Due to the development of speech technology, there is an increased interest now in searching for expert speaker verification systems, which have high reliability and low labour intensiveness because of the automation of data processing for the expert analysis. System Description. We present a description of a novel system analyzing similarity or distinction of speaker voices based on comparing statistics of phone lengths, formant features and melodic characteristics. The characteristic feature of the proposed system based on fusion of methods is a weak correlation between the analyzed features that leads to a decrease in the error rate of speaker recognition. The system advantage is the possibility to carry out rapid analysis of recordings since the processes of data preprocessing and making decision are automated. We describe the functioning methods as well as fusion of methods to combine their decisions. Main Results. We have tested the system on the speech database of 1190 target trials and 10450 non-target trials, including the Russian speech of the male and female speakers. The recognition accuracy of the system is 98.59% on the database containing records of the male speech, and 96.17% on the database containing records of the female speech. It was also experimentally established that the formant method is the most reliable of all used methods. Practical Significance. Experimental results have shown that proposed system is applicable for the speaker recognition task in the course of phonoscopic examination.

  12. Validation study of a computer-based open surgical trainer: SimPraxis® simulation platform

    Directory of Open Access Journals (Sweden)

    Tran LN

    2013-03-01

    Full Text Available Linh N Tran,1 Priyanka Gupta,2 Lauren H Poniatowski,2 Shaheen Alanee,3 Marc A Dall’Era,4 Robert M Sweet21Department of Internal Medicine, Loma Linda University, Loma Linda, CA, 2Department of Urology, University of Minnesota, Minneapolis, MN, 3Urology Service, Department of Surgery, Memorial Sloan-Kettering Cancer Center, New York, NY, 4Department of Urology, University of California, Davis, CA, USABackground: Technological advances have dramatically changed medical education, particularly in the era of work-hour restrictions, which increasingly highlights a need for novel methods to teach surgical skills. The purpose of this study was to evaluate the validity of a novel, computer-based, interactive, cognitive simulator for training surgeons to perform pelvic lymph node dissection (PLND.Methods: Eight prostate cancer experts evaluated the content of the simulator. Contextual aspects of the simulator were rated on a five-point Likert scale. The experts and nine first-year residents completed a simulated PLND. Time and deviations were logged, and the results were compared between experts and novices using the Mann–Whitney test.Results: Before training, 88% of the experts felt that a validated simulator would be useful for PLND training. After testing, 100% of the experts felt that it would be more useful than standard video training. Eighty-eight percent stated that they would like to see the simulator in the curriculum of residency programs and 56% thought it would be useful for accreditation purposes. The experts felt that the simulator aided in overall understanding, training indications, concepts and steps of the procedure, training how to use an assistant, and enhanced the knowledge of anatomy. Median performance times taken by experts and interns to complete a PLND procedure on the simulator were 12.62 and 23.97 minutes, respectively. Median deviation from the incorporated procedure pathway for experts was 24.5 and was 89 for novices

  13. Achievement report on developing superconductor power applied technologies in fiscal 1999 (2). Research and development of superconductor wire materials, research and development of superconductor power generators, research of total systems, research and development of freezing systems, and verification tests; 1999 nendo chodendo denryoku oyo gijutsu kaihatsu seika hokokusho. 2. Chodendo senzai no kenkyu kaihatsu / chodendo hatsudenki no kenkyu kaihatsu / total system no kenkyu / reito system no kenkyu kaihatsu / jissho shiken

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective to achieve higher efficiency, higher density, and higher stability in power systems, research and development has been performed on superconductor power generators. This paper summarizes the achievements thereof in fiscal 1999. A verification test was given on the rotor of an ultra high speed responding generator. In a sudden short circuit test using the different phase charging method, no anomalies were found such as quench generation and vibration changes, wherein the healthiness of the generator was verified. In the VVVF actuation test, knowledge was acquired on the actuation method when the ultra high speed responding generator is applied to a combined cycle plant. After the verification test has been completed, the disassembly inspections such as visual check and non-destructive test were performed. With regard to the vacuum leakage found in the rotor under very low temperatures, the causes were presumed and the countermeasures were discussed by observing the weld structures. In the design research, the conception design on the 200-MW pilot generator was reviewed by reflecting the results of the verification tests on the model generator. At the same time, trial design was made on a 600-MW target generator. In summarizing the overall research achievements, the achievements and evaluations were summarized on technological issues that have been allotted to each research member. (NEDO)

  14. Emergency planning in school-based athletics: a national survey of athletic trainers.

    Science.gov (United States)

    Olympia, Robert P; Dixon, Trevor; Brady, Jodi; Avner, Jeffrey R

    2007-10-01

    To use nationally published guidelines to examine the preparedness of schools in the United States to respond to emergencies associated with school-based athletics. A questionnaire, mailed to 1000 randomly selected members of the National Athletic Trainers' Association, included questions on the clinical background of the athletic trainer, the demographic features of their school, the preparedness of their school to manage life-threatening athletic emergencies, the presence of preventative measures to avoid potential sport-related emergencies, and the immediate availability of emergency equipment. Of the 944 questionnaires delivered, 643 (68%) were returned; of these, 521 (81%) were eligible for analysis (55% usable response rate). Seventy percent (95% confidence interval [CI], 66-74) of schools have a Written Emergency Plan (WEP), although 36% (95% CI, 30-40) of schools with a WEP do not practice the plan. Thirty-four percent (95% CI, 30-38) of schools have an athletic trainer present during all athletic events. Sports previously noted to have higher rates of fatalities/injuries based on published literature, such as ice hockey and gymnastics, had, according to our data, less coverage by athletic trainers compared with other sports with lower rates of fatalities/injuries. Athletic trainers reported the immediate availability of the following during athletic events: cervical spine collar (62%, 95% CI, 58-66), automatic electronic defibrillator (61%, 95% CI, 57-65), epinephrine autoinjector (37%, 95% CI, 33-41), bronchodilator metered-dose inhaler (36%, 95% CI, 32-40). Although schools are in compliance with many of the recommendations for school-based athletic emergency preparedness, specific areas for improvement include practicing the WEP several times a year, linking all areas of the school directly with emergency medical services, increasing the presence of athletic trainers at athletic events (especially sports with a higher rate of fatalities

  15. An analysis of equine round pen training videos posted online: Differences between amateur and professional trainers.

    Directory of Open Access Journals (Sweden)

    Erin Kydd

    Full Text Available Natural Horsemanship is popular among many amateur and professional trainers and as such, has been the subject of recent scientific enquiry. One method commonly adopted by Natural Horsemanship (NH trainers is that of round pen training (RPT. RPT sessions are usually split into a series of bouts; each including two phases: chasing/flight and chasing offset/flight offset. However, NH training styles are heterogeneous. This study investigated online videos of RPT to explore the characteristics of RPT sessions and test for differences in techniques and outcomes between amateurs and professionals (the latter being defined as those with accompanying online materials that promote clinics, merchandise or a service to the public. From more than 300 candidate videos, we selected sample files for individual amateur (n = 24 and professional (n = 21 trainers. Inclusion criteria were: training at liberty in a Round Pen; more than one bout and good quality video. Sessions or portions of sessions were excluded if the trainer attached equipment, such as a lunge line, directly to the horse or the horse was saddled, mounted or ridden. The number of bouts and duration of each chasing and non-chasing phase were recorded, and the duration of each RPT session was calculated. General weighted regression analysis revealed that, when compared with amateurs, professionals showed fewer arm movements per bout (p<0.05. Poisson regression analysis showed that professionals spent more time looking up at their horses, when transitioning between gaits, than amateurs did (p<0.05. The probability of horses following the trainer was not significantly associated with amount of chasing, regardless of category. Given that, according to some practitioners, the following response is a goal of RPT, this result may prompt caution in those inclined to give chase. The horses handled by professionals showed fewer conflict behaviours (e.g. kicking, biting, stomping, head-tossing, defecating

  16. New data structures and algorithms for logic synthesis and verification

    CERN Document Server

    Amaru, Luca Gaetano

    2017-01-01

    This book introduces new logic primitives for electronic design automation tools. The author approaches fundamental EDA problems from a different, unconventional perspective, in order to demonstrate the key role of rethinking EDA solutions in overcoming technological limitations of present and future technologies. The author discusses techniques that improve the efficiency of logic representation, manipulation and optimization tasks by taking advantage of majority and biconditional logic primitives. Readers will be enabled to accelerate formal methods by studying core properties of logic circuits and developing new frameworks for logic reasoning engines. · Provides a comprehensive, theoretical study on majority and biconditional logic for logic synthesis; · Updates the current scenario in synthesis and verification – especially in light of emerging technologies; · Demonstrates applications to CMOS technology and emerging technologies.

  17. Software verification and validation for commercial statistical packages utilized by the statistical consulting section of SRTC

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, T.B.

    2000-03-22

    The purpose of this report is to provide software verification and validation for the statistical packages used by the Statistical Consulting Section (SCS) of the Savannah River Technology Center. The need for this verification and validation stems from the requirements of the Quality Assurance programs that are frequently applicable to the work conducted by SCS. The IBM Personal Computer 300PL and 300XL are both Pentium II based desktops. Therefore the software verification and validation in this report is valid interchangeably between both platforms. As new computing platforms, statistical packages, or revisions to existing packages are reevaluated using these new tools, this report is to be revised to address their verification and validation.

  18. Verification of classified fissile material using unclassified attributes

    International Nuclear Information System (INIS)

    Nicholas, N.J.; Fearey, B.L.; Puckett, J.M.; Tape, J.W.

    1998-01-01

    This paper reports on the most recent efforts of US technical experts to explore verification by IAEA of unclassified attributes of classified excess fissile material. Two propositions are discussed: (1) that multiple unclassified attributes could be declared by the host nation and then verified (and reverified) by the IAEA in order to provide confidence in that declaration of a classified (or unclassified) inventory while protecting classified or sensitive information; and (2) that attributes could be measured, remeasured, or monitored to provide continuity of knowledge in a nonintrusive and unclassified manner. They believe attributes should relate to characteristics of excess weapons materials and should be verifiable and authenticatable with methods usable by IAEA inspectors. Further, attributes (along with the methods to measure them) must not reveal any classified information. The approach that the authors have taken is as follows: (1) assume certain attributes of classified excess material, (2) identify passive signatures, (3) determine range of applicable measurement physics, (4) develop a set of criteria to assess and select measurement technologies, (5) select existing instrumentation for proof-of-principle measurements and demonstration, and (6) develop and design information barriers to protect classified information. While the attribute verification concepts and measurements discussed in this paper appear promising, neither the attribute verification approach nor the measurement technologies have been fully developed, tested, and evaluated

  19. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-04-30

    The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

  20. Hungarian-Vietnamese Nuclear Energy Train the Trainers Course

    International Nuclear Information System (INIS)

    Aszódi, Attila; Boros, Ildikó; Czifrus, Szabolcs; Kiss, István

    2014-01-01

    HUVINETT 2012-2013: Hungarian-Vietnamese Nuclear Energy „Train the Trainers” Course: HUVINETT Courses at Paks NPP - • 3 weeks of practice oriented training; • Practical application of nuclear theory and knowledge; • Plant technology; • Importance of nuclear safety; • Behavioral standards and required attitude in a nuclear power plant; • Practice in real working environment: – Maintenance Performance Improvement Center; – Simulator; – Labs and workshops of the plant

  1. The SeaHorn Verification Framework

    Science.gov (United States)

    Gurfinkel, Arie; Kahsai, Temesghen; Komuravelli, Anvesh; Navas, Jorge A.

    2015-01-01

    In this paper, we present SeaHorn, a software verification framework. The key distinguishing feature of SeaHorn is its modular design that separates the concerns of the syntax of the programming language, its operational semantics, and the verification semantics. SeaHorn encompasses several novelties: it (a) encodes verification conditions using an efficient yet precise inter-procedural technique, (b) provides flexibility in the verification semantics to allow different levels of precision, (c) leverages the state-of-the-art in software model checking and abstract interpretation for verification, and (d) uses Horn-clauses as an intermediate language to represent verification conditions which simplifies interfacing with multiple verification tools based on Horn-clauses. SeaHorn provides users with a powerful verification tool and researchers with an extensible and customizable framework for experimenting with new software verification techniques. The effectiveness and scalability of SeaHorn are demonstrated by an extensive experimental evaluation using benchmarks from SV-COMP 2015 and real avionics code.

  2. Trainers' perception of the learning environment and student competency : A qualitative investigation of midwifery and anesthesia training programs in Ethiopia

    NARCIS (Netherlands)

    Kibwana, Sharon; Haws, Rachel; Kols, Adrienne; Ayalew, Firew; Kim, Young-Mi; van Roosmalen, Jos; Stekelenburg, Jelle

    Background: Ethiopia has successfully expanded training for midwives and anesthetists in public institutions. This study explored the perceptions of trainers (instructors, clinical lab assistants and preceptors) towards the adequacy of students' learning experience and implications for achieving

  3. Field Evaluation of Model II of the Computer-Based, Individual Trainer for the Radar Intercept Officer

    Science.gov (United States)

    1974-07-01

    Inspection. Subsequent analyses were done manually , using appropriate categories oJ these data. This .eUu^do sundry and analysis is...spent on the trainers, as recorded manually in a log. Thus, these times are not as accurate as those in remainder of the table...tradition are without pretest. Randomization procedures were taught to the TD technicians who monitored the operaCion of clu trainer at the

  4. Practicals, skills and emotional requirements. A look of entrepreneurship trainers in Villa Maria (Córdoba

    Directory of Open Access Journals (Sweden)

    Diego Quattrini

    2017-04-01

    Full Text Available In the last years to respond to social marginalization processes compensation social policies were launched, some of them with the idea to support the construction of the employability of working people. As part of these policies, in the different levels of government, were promoted training in entrepreneurship. In this sense, this paper seeks to address the educational proposals aimed at formation in work emotions for trainers in micro-entrepreneurship Villa Maria (Cordoba. The proposal is to analyze the discourse of based management skills of trainers in relation to their possible impact on the construction of “enterprising sensibilities” for the job. To examine part this type of the training will be used methodology of q

  5. The essence of training trainers in the context of distance education

    Directory of Open Access Journals (Sweden)

    Yudy Alexandra Molina-Hurtado

    2016-12-01

    mobilization of knowledge in concrete situations and different scenarios. The objective of the article focuses on the importance of the training of trainers in the context of distance education so characterized, on the one hand, the trainer as a person who refines and contemplates his practice from a surrounding reality that impels the formation of values ethical, human, political, economic, social and immersed cultic in the role of teachers in the twenty-first century, and on the other hand, teachers in training as critical beings, advocates and peacemakers to think as teachers for life. Under this, a reflection between teacher training and professional development to the challenges that teachers face in training regarding their teaching practices supported from teaching and affirmed in the classroom through the teaching process is presented under the staging of competitions and performances from processes that generate autonomy to face the complex world in which we live.

  6. Initial training for trainers the spiral process or ''getting trained while training''

    International Nuclear Information System (INIS)

    Croes, R.

    1996-01-01

    The initial training program for trainers is part of an overall gradual development towards full professionalism. Based on the two key words, responsibility and autonomy, the global aim is to provide assistance to new instructors so that they become full actors in their own training process and to prepare them to deal with all the different situations they may meet. The SPIRAL process lasts one full year and could be characterized in four words: alternation, support, individualization and project. From the first weeks in the process, the new trainers already deliver training instructions. The SPIRAL year terminates with the presentation to the project before an evaluation board. The evaluation takes into account the project and the on going assessment of acquisition of knowledge and skills

  7. National athletic trainers' association position statement: preventing sudden death in sports.

    Science.gov (United States)

    Casa, Douglas J; Guskiewicz, Kevin M; Anderson, Scott A; Courson, Ronald W; Heck, Jonathan F; Jimenez, Carolyn C; McDermott, Brendon P; Miller, Michael G; Stearns, Rebecca L; Swartz, Erik E; Walsh, Katie M

    2012-01-01

    To present recommendations for the prevention and screening, recognition, and treatment of the most common conditions resulting in sudden death in organized sports. Cardiac conditions, head injuries, neck injuries, exertional heat stroke, exertional sickling, asthma, and other factors (eg, lightning, diabetes) are the most common causes of death in athletes. These guidelines are intended to provide relevant information on preventing sudden death in sports and to give specific recommendations for certified athletic trainers and others participating in athletic health care.

  8. Laparoscopic simulation for all: two affordable, upgradable, and easy-to-build laparoscopic trainers.

    Science.gov (United States)

    Smith, Matthew D; Norris, Joseph M; Kishikova, Lyudmila; Smith, David P

    2013-01-01

    Laparoscopic surgery has established itself as the approach of choice for a multitude of operations in general, urological, and gynecological surgery. A number of factors make performing laparoscopic surgery technically demanding, and as such it is crucial that surgical trainees hone their skills safely on trainers before operating on patients. These can be highly expensive. Here, we describe a novel and upgradable approach to constructing an affordable laparoscopic trainer. A pattern was produced to build an upgradable laparoscopic trainer for less than $100. The basic model was constructed from an opaque plastic crate with plywood base, 2 trocars, and 2 pairs of disposable laparoscopic instruments. A laptop, a light emitting diode (LED), and a fixed webcam were utilized to visualize the box interior. An enhanced version was also created, as an optional upgrade to the basic model, featuring a neoprene-trocar interface and a simulated mobile laparoscope. The described setup allowed trainees to gain familiarity with laparoscopic techniques, beginning with simple manipulation and then progressing through to more relevant procedures. Novices began by moving easy-to-grasp objects between containers and then attempting more challenging manipulations such as stacking sugar cubes, excising simulated lesions, threading circular mints onto cotton, and ligating fastened drinking straws. These techniques have introduced the necessity of careful instrument placement and have increased trainees' dexterity with laparoscopy. Here, we have outlined an upgradable and affordable alternative laparoscopic trainer that has given many trainees crucial experience with laparoscopic techniques, allowing them to safely improve their manual skill and confidence. Copyright © 2013 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  9. Information Collection on the Situation of VET Teachers and Trainers in Candidate Countries

    OpenAIRE

    Foundation VET reform in Estonia / Estonian National Observatory

    2002-01-01

    Currently there are two main categories of teachers in VET schools – VET teachers and teachers of general education subjects. The former status of two different kinds of VET teachers – the professional subject teacher, and the training master has been replaced by one VET teacher category by the Regulation No 18 of the Minister of Culture and Education the Statute of a VET Teacher/Trainer of 26 May 1995.VET teachers have to carry out workshop training and teach professional subj...

  10. Learning results of GP trainers in a blended learning course on EBM: a cohort study.

    Science.gov (United States)

    te Pas, Ellen; Wieringa-de Waard, Margreet; de Ruijter, Wouter; van Dijk, Nynke

    2015-06-12

    General practitioners (GPs) experience barriers to the use of evidence-based medicine (EBM) related to a negative attitude and to insufficient knowledge and skills. We therefore designed a blended learning intervention to develop the competence of GP trainers in EBM. This study investigated the effectiveness of this intervention in increasing the trainers' EBM competencies (i.e. knowledge, skills, attitude and behaviour). In total 129 GP trainers participated in the blended learning course on EBM consisting of four 3-h face-to-face meetings and an intensive preparatory e-course before each meeting over a 12-month period. The primary outcomes were changes in knowledge and skills (Fresno test), changes in attitude (McColl test) and intentions to change behaviour. Secondary outcomes were changes in self-rated knowledge, skills and attitude, and the relation between personal characteristics and changes in knowledge, skills and attitude. Data were collected before the start of the intervention (T0), at the end of the last day of the intervention (T1) and four months after the end of the intervention (T2). The mean changes in scores on the Fresno test were ∆T1-T0 = 40.8 (SD ±36.7, p attitude. An intensive blended learning course on EBM for GP trainers induces an increase in knowledge and skills that, although decreased, remains after four months. Attitude and behaviour towards EBM show no differences before and after the intervention, although GPs' intention to use EBM more often in their practice is present.

  11. A verification environment for bigraphs

    DEFF Research Database (Denmark)

    Perrone, Gian David; Debois, Søren; Hildebrandt, Thomas

    2013-01-01

    We present the BigMC tool for bigraphical reactive systems that may be instantiated as a verification tool for any formalism or domain-specific modelling language encoded as a bigraphical reactive system. We introduce the syntax and use of BigMC, and exemplify its use with two small examples......: a textbook “philosophers” example, and an example motivated by a ubiquitous computing application. We give a tractable heuristic with which to approximate interference between reaction rules, and prove this analysis to be safe. We provide a mechanism for state reachability checking of bigraphical reactive...

  12. National Athletic Trainers' Association Position Statement: Conservative Management and Prevention of Ankle Sprains in Athletes

    Science.gov (United States)

    Kaminski, Thomas W.; Hertel, Jay; Amendola, Ned; Docherty, Carrie L.; Dolan, Michael G.; Hopkins, J. Ty; Nussbaum, Eric; Poppy, Wendy; Richie, Doug

    2013-01-01

    Objective: To present recommendations for athletic trainers and other allied health care professionals in the conservative management and prevention of ankle sprains in athletes. Background: Because ankle sprains are a common and often disabling injury in athletes, athletic trainers and other sports health care professionals must be able to implement the most current and evidence-supported treatment strategies to ensure safe and rapid return to play. Equally important is initiating preventive measures to mitigate both first-time sprains and the chance of reinjury. Therefore, considerations for appropriate preventive measures (including taping and bracing), initial assessment, both short- and long-term management strategies, return-to-play guidelines, and recommendations for syndesmotic ankle sprains and chronic ankle instability are presented. Recommendations: The recommendations included in this position statement are intended to provide athletic trainers and other sports health care professionals with guidelines and criteria to deliver the best health care possible for the prevention and management of ankle sprains. An endorsement as to best practice is made whenever evidence supporting the recommendation is available. PMID:23855363

  13. Promoting Healthy Lifestyles to Children at School: Using a Multidisciplinary Train-the-Trainer Approach.

    Science.gov (United States)

    Sanders, Martha J; Reynolds, Jesse; Bagatell, Nancy; Treu, Judith A; OʼConnor, Edward; Katz, David L

    2015-01-01

    The purpose of the study was to examine the efficacy of a multidisciplinary train-the-trainer model for improving fitness and food label literacy in third-grade students. University student trainers taught ABC for Fitness and Nutrition Detectives, established programs to promote physical activity and nutrition knowledge, to 239 third-grade students in 2 communities over a 6-month period. A total of 110 children were in the intervention group and 129 children in the control group (2 schools each). Outcomes included the Food Label Literacy and Nutrition Knowledge test and the fitness measures of curl-ups, push-ups, 0.5-mile run, and sit and reach. Focus groups were conducted as process feedback. Four public schools in 2 different communities. A total of 200 third-grade students. ABC for Fitness and Nutrition Detectives. Food Label Literacy and Nutrition Knowledge test and the fitness measures of curl-ups, push-ups, 0.5-mile run, and sit and reach. Nutrition knowledge increased in the intervention group by 25.2% (P sit and reach left (P = .07), and 0.5-mile run (P = .06). Process feedback from 3 teachers and 60 students indicated satisfaction with the program. Adaptation of the train-the-trainer approach for Nutrition Detectives and ABC for Fitness was effective for delivering these health-related programs.

  14. Train-the-trainer program on cardiovascular health for community pharmacists in Malaysia.

    Science.gov (United States)

    Lee, Shaun Wen Huey; Mak, Vivienne Sook Li

    2017-12-01

    Background Studies have highlighted the benefits of having community pharmacists to deliver cardiovascular screening to patients. However, only few of such trainings are provided in Malaysia. Objective To describe the implementation and evaluation of a cardiovascular train-the-trainer program for community pharmacists. Method Community pharmacists' attended a 5 h train-the-trainer program. A pre and post-training survey was administered to participants who attended the workshop to determine their requirements for education and effectiveness of the training provided. Results Forty community pharmacists participated and were trained with 35 of them completing both the pre and post training assessment. Participants self-reported confidence, knowledge and ability to conduct a workshop on cardiovascular health increased between 0.22 and 0.75 points post-training (p train another 114 participants on cardiovascular health. Conclusion Participation in a train-the-trainer program significantly increases community pharmacists' perceived ability and confidence in conducting a cardiovascular health workshop.

  15. Recruitment and Rotation of the Trainers in the Lifelong Learning Context

    Science.gov (United States)

    Mamaqi, Xhevrie; Rubio, Pilar Olave; Alvarez, Jesús Miguel

    The workplace of today is characterized by rapid changes in work processes, in competition, in customer demands, and in work practices. To keep abreast of these rapid changes employers and employees must be committed to lifelong learning in order to keep ahead. One of the most important actors in the lifelong learning development process are the trainers, whose professional characteristics needs meeting new skills and adapting an varied and specific contents of the current labour market. Affected by the discontinuity and a high rate of job rotation, the recognition of it labour status and basic competence and skills, forms part of the Bologna Process recognized as Vocational Education Training (VET). Sixty in-depth interviews realized to managers of the centres of formation, are used as tools to obtain information about following topics: recruitment strategies, conventional and not conventional routes of the recruitment, rate rotation, qualification and training of the Spanish trainers. The transcription of the interviews achieve that not always exist a previous plan of recruitment, except that it is a question as big centers of formation. Also, the obtained information indicates a high rate of rotation that affects the trainers ones as professionals since there exists the discontinuity of the formative offer on the labour market.

  16. Sustaining a verification regime in a nuclear weapon-free world. VERTIC research report no. 4

    International Nuclear Information System (INIS)

    Moyland, S. van

    1999-01-01

    Sustaining high levels of commitment to and enthusiasm for the verification regime in a nuclear weapon-free world (NWFW) would be a considerable challenge, but the price of failure would be high. No verification system for a complete ban on a whole of weapon of mass destruction (WMD) has been in existence long enough to provide a precedent or the requisite experience. Nevertheless, lessons from the International Atomic Energy Agency's (IAEA) nuclear safeguards system are instructive. A potential problem over the long haul is the gradual erosion of the deterrent effect of verification that may result from the continual overlooking of minor instances of non-compliance. Flaws in the verification system must be identified and dealt with early lest they also corrode the system. To achieve this the verification organisation's inspectors and analytical staff will need sustained support, encouragement, resources and training. In drawing attention to weaknesses, they must be supported by management and at the political level. The leaking of sensitive information, either industrial or military, by staff of the verification regime is a potential problem. 'Managed access' techniques should be constantly examined and improved. The verification organisation and states parties will need to sustain close co-operation with the nuclear and related industries. Frequent review mechanisms must be established. States must invest time and effort to make them effective. Another potential problem is the withering of resources for sustained verification. Verification organisations tend to be pressured by states to cut or last least cap costs, even if the verification workload increases. The verification system must be effective as knowledge and experience allows. The organisation will need continuously to update its scientific methods and technology. This requires in-house resources plus external research and development (R and D). Universities, laboratories and industry need incentives to

  17. Particularities of Verification Processes for Distributed Informatics Applications

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2013-01-01

    Full Text Available This paper presents distributed informatics applications and characteristics of their development cycle. It defines the concept of verification and there are identified the differences from software testing. Particularities of the software testing and software verification processes are described. The verification steps and necessary conditions are presented and there are established influence factors of quality verification. Software optimality verification is analyzed and some metrics are defined for the verification process.

  18. Inspection and verification of waste packages for near surface disposal

    International Nuclear Information System (INIS)

    2000-01-01

    Extensive experience has been gained with various disposal options for low and intermediate level waste at or near surface disposal facilities. Near surface disposal is based on proven and well demonstrated technologies. To ensure the safety of near surface disposal facilities when available technologies are applied, it is necessary to control and assure the quality of the repository system's performance, which includes waste packages, engineered features and natural barriers, as well as siting, design, construction, operation, closure and institutional controls. Recognizing the importance of repository performance, the IAEA is producing a set of technical publications on quality assurance and quality control (QA/QC) for waste disposal to provide Member States with technical guidance and current information. These publications cover issues on the application of QA/QC programmes to waste disposal, long term record management, and specific QA/QC aspects of waste packaging, repository design and R and D. Waste package QA/QC is especially important because the package is the primary barrier to radionuclide release from a disposal facility. Waste packaging also involves interface issues between the waste generator and the disposal facility operator. Waste should be packaged by generators to meet waste acceptance requirements set for a repository or disposal system. However, it is essential that the disposal facility operator ensure that waste packages conform with disposal facility acceptance requirements. Demonstration of conformance with disposal facility acceptance requirements can be achieved through the systematic inspection and verification of waste packages at both the waste generator's site and at the disposal facility, based on a waste package QA/QC programme established by the waste generator and approved by the disposal operator. However, strategies, approaches and the scope of inspection and verification will be somewhat different from country to country

  19. Cognitive Bias in Systems Verification

    Science.gov (United States)

    Larson, Steve

    2012-01-01

    Working definition of cognitive bias: Patterns by which information is sought and interpreted that can lead to systematic errors in decisions. Cognitive bias is used in diverse fields: Economics, Politics, Intelligence, Marketing, to name a few. Attempts to ground cognitive science in physical characteristics of the cognitive apparatus exceed our knowledge. Studies based on correlations; strict cause and effect is difficult to pinpoint. Effects cited in the paper and discussed here have been replicated many times over, and appear sound. Many biases have been described, but it is still unclear whether they are all distinct. There may only be a handful of fundamental biases, which manifest in various ways. Bias can effect system verification in many ways . Overconfidence -> Questionable decisions to deploy. Availability -> Inability to conceive critical tests. Representativeness -> Overinterpretation of results. Positive Test Strategies -> Confirmation bias. Debiasing at individual level very difficult. The potential effect of bias on the verification process can be managed, but not eliminated. Worth considering at key points in the process.

  20. Video-based fingerprint verification.

    Science.gov (United States)

    Qin, Wei; Yin, Yilong; Liu, Lili

    2013-09-04

    Conventional fingerprint verification systems use only static information. In this paper, fingerprint videos, which contain dynamic information, are utilized for verification. Fingerprint videos are acquired by the same capture device that acquires conventional fingerprint images, and the user experience of providing a fingerprint video is the same as that of providing a single impression. After preprocessing and aligning processes, "inside similarity" and "outside similarity" are defined and calculated to take advantage of both dynamic and static information contained in fingerprint videos. Match scores between two matching fingerprint videos are then calculated by combining the two kinds of similarity. Experimental results show that the proposed video-based method leads to a relative reduction of 60 percent in the equal error rate (EER) in comparison to the conventional single impression-based method. We also analyze the time complexity of our method when different combinations of strategies are used. Our method still outperforms the conventional method, even if both methods have the same time complexity. Finally, experimental results demonstrate that the proposed video-based method can lead to better accuracy than the multiple impressions fusion method, and the proposed method has a much lower false acceptance rate (FAR) when the false rejection rate (FRR) is quite low.

  1. RISKIND verification and benchmark comparisons

    Energy Technology Data Exchange (ETDEWEB)

    Biwer, B.M.; Arnish, J.J.; Chen, S.Y.; Kamboj, S.

    1997-08-01

    This report presents verification calculations and benchmark comparisons for RISKIND, a computer code designed to estimate potential radiological consequences and health risks to individuals and the population from exposures associated with the transportation of spent nuclear fuel and other radioactive materials. Spreadsheet calculations were performed to verify the proper operation of the major options and calculational steps in RISKIND. The program is unique in that it combines a variety of well-established models into a comprehensive treatment for assessing risks from the transportation of radioactive materials. Benchmark comparisons with other validated codes that incorporate similar models were also performed. For instance, the external gamma and neutron dose rate curves for a shipping package estimated by RISKIND were compared with those estimated by using the RADTRAN 4 code and NUREG-0170 methodology. Atmospheric dispersion of released material and dose estimates from the GENII and CAP88-PC codes. Verification results have shown the program to be performing its intended function correctly. The benchmark results indicate that the predictions made by RISKIND are within acceptable limits when compared with predictions from similar existing models.

  2. RISKIND verification and benchmark comparisons

    International Nuclear Information System (INIS)

    Biwer, B.M.; Arnish, J.J.; Chen, S.Y.; Kamboj, S.

    1997-08-01

    This report presents verification calculations and benchmark comparisons for RISKIND, a computer code designed to estimate potential radiological consequences and health risks to individuals and the population from exposures associated with the transportation of spent nuclear fuel and other radioactive materials. Spreadsheet calculations were performed to verify the proper operation of the major options and calculational steps in RISKIND. The program is unique in that it combines a variety of well-established models into a comprehensive treatment for assessing risks from the transportation of radioactive materials. Benchmark comparisons with other validated codes that incorporate similar models were also performed. For instance, the external gamma and neutron dose rate curves for a shipping package estimated by RISKIND were compared with those estimated by using the RADTRAN 4 code and NUREG-0170 methodology. Atmospheric dispersion of released material and dose estimates from the GENII and CAP88-PC codes. Verification results have shown the program to be performing its intended function correctly. The benchmark results indicate that the predictions made by RISKIND are within acceptable limits when compared with predictions from similar existing models

  3. Runtime Verification with State Estimation

    Science.gov (United States)

    Stoller, Scott D.; Bartocci, Ezio; Seyster, Justin; Grosu, Radu; Havelund, Klaus; Smolka, Scott A.; Zadok, Erez

    2011-01-01

    We introduce the concept of Runtime Verification with State Estimation and show how this concept can be applied to estimate theprobability that a temporal property is satisfied by a run of a program when monitoring overhead is reduced by sampling. In such situations, there may be gaps in the observed program executions, thus making accurate estimation challenging. To deal with the effects of sampling on runtime verification, we view event sequences as observation sequences of a Hidden Markov Model (HMM), use an HMM model of the monitored program to "fill in" sampling-induced gaps in observation sequences, and extend the classic forward algorithm for HMM state estimation (which determines the probability of a state sequence, given an observation sequence) to compute the probability that the property is satisfied by an execution of the program. To validate our approach, we present a case study based on the mission software for a Mars rover. The results of our case study demonstrate high prediction accuracy for the probabilities computed by our algorithm. They also show that our technique is much more accurate than simply evaluating the temporal property on the given observation sequences, ignoring the gaps.

  4. The monitoring and verification of nuclear weapons

    International Nuclear Information System (INIS)

    Garwin, Richard L.

    2014-01-01

    This paper partially reviews and updates the potential for monitoring and verification of nuclear weapons, including verification of their destruction. Cooperative monitoring with templates of the gamma-ray spectrum are an important tool, dependent on the use of information barriers

  5. 9 CFR 417.8 - Agency verification.

    Science.gov (United States)

    2010-01-01

    ... ANALYSIS AND CRITICAL CONTROL POINT (HACCP) SYSTEMS § 417.8 Agency verification. FSIS will verify the adequacy of the HACCP plan(s) by determining that each HACCP plan meets the requirements of this part and all other applicable regulations. Such verification may include: (a) Reviewing the HACCP plan; (b...

  6. HTGR analytical methods and design verification

    International Nuclear Information System (INIS)

    Neylan, A.J.; Northup, T.E.

    1982-05-01

    Analytical methods for the high-temperature gas-cooled reactor (HTGR) include development, update, verification, documentation, and maintenance of all computer codes for HTGR design and analysis. This paper presents selected nuclear, structural mechanics, seismic, and systems analytical methods related to the HTGR core. This paper also reviews design verification tests in the reactor core, reactor internals, steam generator, and thermal barrier

  7. 18 CFR 158.5 - Verification.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Verification. 158.5 Section 158.5 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT....5 Verification. The facts stated in the memorandum must be sworn to by persons having knowledge...

  8. A correlation-based fingerprint verification system

    NARCIS (Netherlands)

    Bazen, A.M.; Gerez, Sabih H.; Veelenturf, L.P.J.; van der Zwaag, B.J.; Verwaaijen, G.T.B.

    2000-01-01

    In this paper, a correlation-based fingerprint verification system is presented. Unlike the traditional minutiae-based systems, this system directly uses the richer gray-scale information of the fingerprints. The correlation-based fingerprint verification system first selects appropriate templates

  9. On Verification Modelling of Embedded Systems

    NARCIS (Netherlands)

    Brinksma, Hendrik; Mader, Angelika H.

    Computer-aided verification of embedded systems hinges on the availability of good verification models of the systems at hand. Such models must be much simpler than full design models or specifications to be of practical value, because of the unavoidable combinatorial complexities in the

  10. 21 CFR 123.8 - Verification.

    Science.gov (United States)

    2010-04-01

    ..., including signing and dating, by an individual who has been trained in accordance with § 123.10, of the... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FISH AND FISHERY PRODUCTS General Provisions § 123.8 Verification. (a) Overall verification. Every...

  11. Fingerprint verification prediction model in hand dermatitis.

    Science.gov (United States)

    Lee, Chew K; Chang, Choong C; Johor, Asmah; Othman, Puwira; Baba, Roshidah

    2015-07-01

    Hand dermatitis associated fingerprint changes is a significant problem and affects fingerprint verification processes. This study was done to develop a clinically useful prediction model for fingerprint verification in patients with hand dermatitis. A case-control study involving 100 patients with hand dermatitis. All patients verified their thumbprints against their identity card. Registered fingerprints were randomized into a model derivation and model validation group. Predictive model was derived using multiple logistic regression. Validation was done using the goodness-of-fit test. The fingerprint verification prediction model consists of a major criterion (fingerprint dystrophy area of ≥ 25%) and two minor criteria (long horizontal lines and long vertical lines). The presence of the major criterion predicts it will almost always fail verification, while presence of both minor criteria and presence of one minor criterion predict high and low risk of fingerprint verification failure, respectively. When none of the criteria are met, the fingerprint almost always passes the verification. The area under the receiver operating characteristic curve was 0.937, and the goodness-of-fit test showed agreement between the observed and expected number (P = 0.26). The derived fingerprint verification failure prediction model is validated and highly discriminatory in predicting risk of fingerprint verification in patients with hand dermatitis. © 2014 The International Society of Dermatology.

  12. Face Verification for Mobile Personal Devices

    NARCIS (Netherlands)

    Tao, Q.

    2009-01-01

    In this thesis, we presented a detailed study of the face verification problem on the mobile device, covering every component of the system. The study includes face detection, registration, normalization, and verification. Furthermore, the information fusion problem is studied to verify face

  13. A correlation-based fingerprint verification system

    NARCIS (Netherlands)

    Bazen, A.M.; Gerez, Sabih H.; Veelenturf, L.P.J.; van der Zwaag, B.J.; Verwaaijen, G.T.B.

    In this paper, a correlation-based fingerprint verification system is presented. Unlike the traditional minutiae-based systems, this system directly uses the richer gray-scale information of the fingerprints. The correlation-based fingerprint verification system first selects appropriate templates

  14. National Athletic Trainers' Association position statement: safe weight loss and maintenance practices in sport and exercise.

    Science.gov (United States)

    Turocy, Paula Sammarone; DePalma, Bernard F; Horswill, Craig A; Laquale, Kathleen M; Martin, Thomas J; Perry, Arlette C; Somova, Marla J; Utter, Alan C

    2011-01-01

    To present athletic trainers with recommendations for safe weight loss and weight maintenance practices for athletes and active clients and to provide athletes, clients, coaches, and parents with safe guidelines that will allow athletes and clients to achieve and maintain weight and body composition goals. Unsafe weight management practices can compromise athletic performance and negatively affect health. Athletes and clients often attempt to lose weight by not eating, limiting caloric or specific nutrients from the diet, engaging in pathogenic weight control behaviors, and restricting fluids. These people often respond to pressures of the sport or activity, coaches, peers, or parents by adopting negative body images and unsafe practices to maintain an ideal body composition for the activity. We provide athletic trainers with recommendations for safe weight loss and weight maintenance in sport and exercise. Although safe weight gain is also a concern for athletic trainers and their athletes and clients, that topic is outside the scope of this position statement. Athletic trainers are often the source of nutrition information for athletes and clients; therefore, they must have knowledge of proper nutrition, weight management practices, and methods to change body composition. Body composition assessments should be done in the most scientifically appropriate manner possible. Reasonable and individualized weight and body composition goals should be identified by appropriately trained health care personnel (eg, athletic trainers, registered dietitians, physicians). In keeping with the American Dietetics Association (ADA) preferred nomenclature, this document uses the terms registered dietitian or dietician when referring to a food and nutrition expert who has met the academic and professional requirements specified by the ADA's Commission on Accreditation for Dietetics Education. In some cases, a registered nutritionist may have equivalent credentials and be the

  15. Z-2 Architecture Description and Requirements Verification Results

    Science.gov (United States)

    Graziosi, Dave; Jones, Bobby; Ferl, Jinny; Scarborough, Steve; Hewes, Linda; Ross, Amy; Rhodes, Richard

    2016-01-01

    The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z series of spacesuits. The Z-2 is another step in NASA's technology development roadmap leading to human exploration of the Martian surface. The suit was designed for maximum mobility at 8.3 psid, reduced mass, and to have high fidelity life support interfaces. As Z-2 will be man-tested at full vacuum in NASA JSC's Chamber B, it was manufactured as Class II, making it the most flight-like planetary walking suit produced to date. The Z-2 suit architecture is an evolution of previous EVA suits, namely the ISS EMU, Mark III, Rear Entry I-Suit and Z-1 spacesuits. The suit is a hybrid hard and soft multi-bearing, rear entry spacesuit. The hard upper torso (HUT) is an all-composite structure and includes a 2-bearing rolling convolute shoulder with Vernier sizing mechanism, removable suit port interface plate (SIP), elliptical hemispherical helmet and self-don/doff shoulder harness. The hatch is a hybrid aluminum and composite construction with Apollo style gas connectors, custom water pass-thru, removable hatch cage and interfaces to primary and auxiliary life support feed water bags. The suit includes Z-1 style lower arms with cam brackets for Vernier sizing and government furnished equipment (GFE) Phase VI gloves. The lower torso includes a telescopic waist sizing system, waist bearing, rolling convolute waist joint, hard brief, 2 bearing soft hip thigh, Z-1 style legs with ISS EMU style cam brackets for sizing, and conformal walking boots with ankle bearings. The Z-2 Requirements Verification Plan includes the verification of more than 200 individual requirements. The verification methods include test, analysis, inspection, demonstration or a combination of methods. Examples of unmanned requirements include suit leakage, proof pressure testing, operational life, mass, isometric man-loads, sizing adjustment ranges, internal and external interfaces such as in-suit drink bag

  16. FY 1998 report on the verification survey of geothermal exploration technology, etc. 2/2. Survey of deep geothermal resource; 1998 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. 2/2. Shinbu chinetsu shigen chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-12-01

    For the purpose of commercializing deep geothermal resource, a deep exploration well of 4000m class was drilled in the existing geothermal development area to survey the situation of deep geothermal resource existence and the availability. Concretely, the deep geothermal exploration well was drilled for study in the Kakkonda area, Shizukuishi town, Iwate prefecture, to clarify the situation of deep geothermal resource existence and the whole image of geothermal system. Consideration was made of the deep geothermal exploration method, systematization of deep high temperature drilling technology, and availability of deep geothermal resource. The results of the survey were summed up as follows: 1) general remarks; 2) deep exploration well drilling work; 3) details of the study. This report contained 3). In 3), the items were as follows: heightening of accuracy of the deep geothermal resource exploration method, making of a geothermal model in the Kakkonda area, study of deep drilling technology, study of deep fluid utilization technology, and making of a guide for deep geothermal resource exploration/development in the Kakkonda area. As to the technology of high temperature deep geothermal well drilling, studies were made of the borehole cooling method, mud water cooling method, survey of deterioration of casing with age, etc. (NEDO)

  17. The reading teacher as a trainer of citizens

    Directory of Open Access Journals (Sweden)

    Jennie Brand Barajas

    2017-07-01

    Full Text Available The present is a qualitative study by theorizing, from the approach of the problem of reading as a basic resource for the formation of citizens through education. It starts from the definition of the reading capacity, followed by the revision of the general characteristics of the reading brain proposed by Stalisnas Dehaene (2014, as well as the revolutions in the materials and devices used for the writing, besides the changes in the form of reading, from Sumerian tablets to digital technologies. The process of Education for Development and the distinctive features of digital citizenship are presented, which are: immediacy in the production, transmission and reception of messages; interactivity between receiver and producer; the multi-authoritarian, which gives birth to “the prosumers”; the accessibility of the environment; freedom of expression; the democratization of access and the appropriation of a public space. All this allows contextualizing new forms of reading and new profiles of readers, as well as the generation of virtual reading spaces where communities of dialogue and exchange are formed. The study reaches the teachers and their reading biographies, which largely define their competence to encourage reading among their students and their ability to mobilize them towards citizen responsibility through reading.

  18. IAEA verification experiment at the Portsmouth Gaseous Diffusion Plant

    International Nuclear Information System (INIS)

    Gordon, D.M.; Subudhi, M.; Calvert, O.L.; Bonner, T.N.; Cherry, R.C.; Whiting, N.E.

    1998-01-01

    In April 1996, the United States (US) added the Portsmouth Gaseous Diffusion Plant to the list of facilities eligible for the application of International Atomic Energy Agency (IAEA) safeguards. At that time, the US proposed that the IAEA carry out a Verification Experiment at the plant with respect to the downblending of about 13 metric tons of highly enriched uranium (HEU) in the form of UF 6 . This material is part of the 226 metric tons of fissile material that President Clinton has declared to be excess to US national-security needs and which will be permanently withdrawn from the US nuclear stockpile. In September 1997, the IAEA agreed to carry out this experiment, and during the first three weeks of December 1997, the IAEA verified the design information concerning the downblending process. The plant has been subject to short-notice random inspections since December 17, 1997. This paper provides an overview of the Verification Experiment, the monitoring technologies used in the verification approach, and some of the experience gained to date

  19. The verification of neutron activation analysis support system (cooperative research)

    International Nuclear Information System (INIS)

    Sasajima, Fumio; Ichimura, Shigeju; Ohtomo, Akitoshi; Takayanagi, Masaji

    2000-12-01

    Neutron activation analysis support system is the system in which even the user who has not much experience in the neutron activation analysis can conveniently and accurately carry out the multi-element analysis of the sample. In this verification test, subjects such functions, usability, precision and accuracy of the analysis and etc. of the neutron activation analysis support system were confirmed. As a method of the verification test, it was carried out using irradiation device, measuring device, automatic sample changer and analyzer equipped in the JRR-3M PN-3 facility, and analysis software KAYZERO/SOLCOI based on the k 0 method. With these equipments, calibration of the germanium detector, measurement of the parameter of the irradiation field and analysis of three kinds of environmental standard sample were carried out. The k 0 method adopted in this system is primarily utilized in Europe recently, and it is the analysis method, which can conveniently and accurately carried out the multi-element analysis of the sample without requiring individual comparison standard sample. By this system, total 28 elements were determined quantitatively, and 16 elements with the value guaranteed as analytical data of the NIST (National Institute of Standards and Technology) environment standard sample were analyzed in the accuracy within 15%. This report describes content and verification result of neutron activation support system. (author)

  20. Report on results for fiscal 1997 on development of superconducting electric power application technology. Pt. 2. R and D of superconducting wire, R and D of superconducting generator, studies on total system, R and D of refrigeration system, and verification test; 1997 nendo chodendo denryoku oyo gijutsu kaihatsu seika hokokusho. Chodendo senzai no kenkyu kaihatsu, chodendo hatsudenki no kenkyu kaihatsu, total system no kenkyu, reito system no kenkyu kaihatsu, jissho shiken

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    This report refers, continuously to the Part 1, to the in-situ verification test of the slow-response type model machine rotor and to the review of the conceptual design of the pilot machine. On the basis of the R and D results of various element technology/partial models obtained before the previous fiscal year, the design, manufacturing and factory test had been conducted for a 70,000kW class slow-response type model machine rotor. This year, an in-situ verification test was performed to complete the test of all planned test items. Using the technological results obtained in the design, manufacturing and test of the 70,000kW class model machine, the conceptual design is being reviewed of the 200,000kW class pilot machine. In the aspect of the functional design, accurate grasping of the thermal load is essential for the purpose of attaining a large capacity for a superconducting generator, as a part of which a thermal load analytical method was planned to be established for a torque tube heat exchanger. The reasonableness of the analysis was verified through a comparison with the factory test result of the 70,000kW class slow-response type rotor, indicating good agreement between the calculation result and the actual measurement, and enabling the result to be obtained that explains dependency of the thermal load on the number of revolution. (NEDO)

  1. A train-the-trainer education and promotion program: chronic fatigue syndrome – a diagnostic and management challenge

    Directory of Open Access Journals (Sweden)

    Hynes Kevin

    2008-10-01

    Full Text Available Abstract Background Chronic fatigue syndrome (CFS is a complicated illness for providers and patients. Fewer than 20% of persons with CFS have been diagnosed and treated. For providers, compounding the issue are the challenges in making a diagnosis due to the lack of a biomedical marker. Methods The objective of the CFS diagnosis and management curriculum was to instruct core trainers as to the evaluation, diagnosis, and management of CFS. Over a two year period, 79 primary care physicians, physician assistants, and nurse practitioners from diverse regions in the U.S. participated as core trainers in a two day Train-the-Trainer (TTT workshop. As core trainers, the workshop participants were expected to show increases in knowledge, self-efficacy, and management skills with the primary goal of conducting secondary presentations. Results The optimal goal for each core trainer to present secondary training to 50 persons in the health care field was not reached. However, the combined core trainer group successfully reached 2064 primary care providers. Eighty-two percent of core trainers responded "Very good" or "Excellent" in a post-tessurvey of self-efficacy expectation and CFS diagnosis. Data from the Chicago workshops showed significant improvement on the Primary Care Opinion Survey (p Conclusion Data show the workshop was successful in meeting the objectives of increasing CFS knowledge and raising perceived self-efficacy towards making a diagnosis. The CFS TTT program informed an educational provider project by shifting the format for physicians to grand rounds and continuing medical education design while retaining TTT aspects for nurse practitioners and physicians assistants. Evaluations also indicate that secondary trainings may be more readily employed and accepted if administrative barriers are addressed early in the planning phases.

  2. Smartphone User Identity Verification Using Gait Characteristics

    Directory of Open Access Journals (Sweden)

    Robertas Damaševičius

    2016-09-01

    Full Text Available Smartphone-based biometrics offers a wide range of possible solutions, which could be used to authenticate users and thus to provide an extra level of security and theft prevention. We propose a method for positive identification of smartphone user’s identity using user’s gait characteristics captured by embedded smartphone sensors (gyroscopes, accelerometers. The method is based on the application of the Random Projections method for feature dimensionality reduction to just two dimensions. Then, a probability distribution function (PDF of derived features is calculated, which is compared against known user PDF. The Jaccard distance is used to evaluate distance between two distributions, and the decision is taken based on thresholding. The results for subject recognition are at an acceptable level: we have achieved a grand mean Equal Error Rate (ERR for subject identification of 5.7% (using the USC-HAD dataset. Our findings represent a step towards improving the performance of gait-based user identity verification technologies.

  3. Retail applications of signature verification

    Science.gov (United States)

    Zimmerman, Thomas G.; Russell, Gregory F.; Heilper, Andre; Smith, Barton A.; Hu, Jianying; Markman, Dmitry; Graham, Jon E.; Drews, Clemens

    2004-08-01

    The dramatic rise in identity theft, the ever pressing need to provide convenience in checkout services to attract and retain loyal customers, and the growing use of multi-function signature captures devices in the retail sector provides favorable conditions for the deployment of dynamic signature verification (DSV) in retail settings. We report on the development of a DSV system to meet the needs of the retail sector. We currently have a database of approximately 10,000 signatures collected from 600 subjects and forgers. Previous work at IBM on DSV has been merged and extended to achieve robust performance on pen position data available from commercial point of sale hardware, achieving equal error rates on skilled forgeries and authentic signatures of 1.5% to 4%.

  4. MFTF sensor verification computer program

    International Nuclear Information System (INIS)

    Chow, H.K.

    1984-01-01

    The design, requirements document and implementation of the MFE Sensor Verification System were accomplished by the Measurement Engineering Section (MES), a group which provides instrumentation for the MFTF magnet diagnostics. The sensors, installed on and around the magnets and solenoids, housed in a vacuum chamber, will supply information about the temperature, strain, pressure, liquid helium level and magnet voltage to the facility operator for evaluation. As the sensors are installed, records must be maintained as to their initial resistance values. Also, as the work progresses, monthly checks will be made to insure continued sensor health. Finally, after the MFTF-B demonstration, yearly checks will be performed as well as checks of sensors as problem develops. The software to acquire and store the data was written by Harry Chow, Computations Department. The acquired data will be transferred to the MFE data base computer system

  5. Numerical Verification Of Equilibrium Chemistry

    International Nuclear Information System (INIS)

    Piro, Markus; Lewis, Brent; Thompson, William T.; Simunovic, Srdjan; Besmann, Theodore M.

    2010-01-01

    A numerical tool is in an advanced state of development to compute the equilibrium compositions of phases and their proportions in multi-component systems of importance to the nuclear industry. The resulting software is being conceived for direct integration into large multi-physics fuel performance codes, particularly for providing boundary conditions in heat and mass transport modules. However, any numerical errors produced in equilibrium chemistry computations will be propagated in subsequent heat and mass transport calculations, thus falsely predicting nuclear fuel behaviour. The necessity for a reliable method to numerically verify chemical equilibrium computations is emphasized by the requirement to handle the very large number of elements necessary to capture the entire fission product inventory. A simple, reliable and comprehensive numerical verification method is presented which can be invoked by any equilibrium chemistry solver for quality assurance purposes.

  6. Coherent lidar design and performance verification

    Science.gov (United States)

    Frehlich, Rod

    1993-01-01

    The verification of LAWS beam alignment in space can be achieved by a measurement of heterodyne efficiency using the surface return. The crucial element is a direct detection signal that can be identified for each surface return. This should be satisfied for LAWS but will not be satisfied for descoped LAWS. The performance of algorithms for velocity estimation can be described with two basic parameters: the number of coherently detected photo-electrons per estimate and the number of independent signal samples per estimate. The average error of spectral domain velocity estimation algorithms are bounded by a new periodogram Cramer-Rao Bound. Comparison of the periodogram CRB with the exact CRB indicates a factor of two improvement in velocity accuracy is possible using non-spectral domain estimators. This improvement has been demonstrated with a maximum-likelihood estimator. The comparison of velocity estimation algorithms for 2 and 10 micron coherent lidar was performed by assuming all the system design parameters are fixed and the signal statistics are dominated by a 1 m/s rms wind fluctuation over the range gate. The beam alignment requirements for 2 micron are much more severe than for a 10 micron lidar. The effects of the random backscattered field on estimating the alignment error is a major problem for space based lidar operation, especially if the heterodyne efficiency cannot be estimated. For LAWS, the biggest science payoff would result from a short transmitted pulse, on the order of 0.5 microseconds instead of 3 microseconds. The numerically errors for simulation of laser propagation in the atmosphere have been determined as a joint project with the University of California, San Diego. Useful scaling laws were obtained for Kolmogorov atmospheric refractive turbulence and an atmospheric refractive turbulence characterized with an inner scale. This permits verification of the simulation procedure which is essential for the evaluation of the effects of

  7. Coherent lidar design and performance verification

    Science.gov (United States)

    Frehlich, Rod

    1993-11-01

    The verification of LAWS beam alignment in space can be achieved by a measurement of heterodyne efficiency using the surface return. The crucial element is a direct detection signal that can be identified for each surface return. This should be satisfied for LAWS but will not be satisfied for descoped LAWS. The performance of algorithms for velocity estimation can be described with two basic parameters: the number of coherently detected photo-electrons per estimate and the number of independent signal samples per estimate. The average error of spectral domain velocity estimation algorithms are bounded by a new periodogram Cramer-Rao Bound. Comparison of the periodogram CRB with the exact CRB indicates a factor of two improvement in velocity accuracy is possible using non-spectral domain estimators. This improvement has been demonstrated with a maximum-likelihood estimator. The comparison of velocity estimation algorithms for 2 and 10 micron coherent lidar was performed by assuming all the system design parameters are fixed and the signal statistics are dominated by a 1 m/s rms wind fluctuation over the range gate. The beam alignment requirements for 2 micron are much more severe than for a 10 micron lidar. The effects of the random backscattered field on estimating the alignment error is a major problem for space based lidar operation, especially if the heterodyne efficiency cannot be estimated. For LAWS, the biggest science payoff would result from a short transmitted pulse, on the order of 0.5 microseconds instead of 3 microseconds. The numerically errors for simulation of laser propagation in the atmosphere have been determined as a joint project with the University of California, San Diego. Useful scaling laws were obtained for Kolmogorov atmospheric refractive turbulence and an atmospheric refractive turbulence characterized with an inner scale. This permits verification of the simulation procedure which is essential for the evaluation of the effects of

  8. Formal verification of algorithms for critical systems

    Science.gov (United States)

    Rushby, John M.; Von Henke, Friedrich

    1993-01-01

    We describe our experience with formal, machine-checked verification of algorithms for critical applications, concentrating on a Byzantine fault-tolerant algorithm for synchronizing the clocks in the replicated computers of a digital flight control system. First, we explain the problems encountered in unsynchronized systems and the necessity, and criticality, of fault-tolerant synchronization. We give an overview of one such algorithm, and of the arguments for its correctness. Next, we describe a verification of the algorithm that we performed using our EHDM system for formal specification and verification. We indicate the errors we found in the published analysis of the algorithm, and other benefits that we derived from the verification. Based on our experience, we derive some key requirements for a formal specification and verification system adequate to the task of verifying algorithms of the type considered. Finally, we summarize our conclusions regarding the benefits of formal verification in this domain, and the capabilities required of verification systems in order to realize those benefits.

  9. Design verification and cold-flow modeling test report

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    This report presents a compilation of the following three test reports prepared by TRW for Alaska Industrial Development and Export Authority (AIDEA) as part of the Healy Clean Coal Project, Phase 1 Design of the TRW Combustor and Auxiliary Systems, which is co-sponsored by the Department of Energy under the Clean Coal Technology 3 Program: (1) Design Verification Test Report, dated April 1993, (2) Combustor Cold Flow Model Report, dated August 28, 1992, (3) Coal Feed System Cold Flow Model Report, October 28, 1992. In this compilation, these three reports are included in one volume consisting of three parts, and TRW proprietary information has been excluded.

  10. Development of Ion-Plasma Technology of Deposition of the Nanostructure Bactericidal Coatings on Orthopaedic Implantats and Fixative Devices. Production of Pilot Samples for Verification of their Use in Clinic

    Directory of Open Access Journals (Sweden)

    V.A. Belous

    2013-11-01

    Full Text Available Technology for creating coatings based on titanium oxide, which have pronounced antibacterial properties manifested upon X-ray and UV irradiation has been developed. Biological research showed that the obtained coatings are biocompatible and do not exert cytotoxic effect on cultured fibroblasts, cellular composition of subcutaneous fat and restructure of bone tissue. It is found that nanostructured coatings with anatase structure and thickness of ≥9 microns, implanted with molybdenum ions, have an optimum combination of properties. The department for the deposition of antibacterial coatings on orthopedic implants is created.

  11. Verification of Timed-Arc Petri Nets

    DEFF Research Database (Denmark)

    Jacobsen, Lasse; Jacobsen, Morten; Møller, Mikael Harkjær

    2011-01-01

    of interesting theoretical properties distinguishing them from other time extensions of Petri nets. We shall give an overview of the recent theory developed in the verification of TAPN extended with features like read/transport arcs, timed inhibitor arcs and age invariants. We will examine in detail...... the boundaries of automatic verification and the connections between TAPN and the model of timed automata. Finally, we will mention the tool TAPAAL that supports modelling, simulation and verification of TAPN and discuss a small case study of alternating bit protocol....

  12. Privacy Preserving Iris Based Biometric Identity Verification

    Directory of Open Access Journals (Sweden)

    Przemyslaw Strzelczyk

    2011-08-01

    Full Text Available Iris biometrics is considered one of the most accurate and robust methods of identity verification. Individually unique iris features can be presented in a compact binary form easily compared with reference template to confirm identity. However, when templates or features are disclosed, iris biometrics is no longer suitable for verification. Therefore, there is a need to perform iris feature matching without revealing the features itself and reference template. The paper proposes an extension of the standard iris-based verification protocol that introduces features and a template locking mechanism, which guarantees that no sensitive information is exposed.Article in English

  13. Comparing formal verification approaches of interlocking systems

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Nguyen, Hoang Nga; Roggenbach, Markus

    2016-01-01

    The verification of railway interlocking systems is a challenging task, and therefore several research groups have suggested to improve this task by using formal methods, but they use different modelling and verification approaches. To advance this research, there is a need to compare...... these approaches. As a first step towards this, in this paper we suggest a way to compare different formal approaches for verifying designs of route-based interlocking systems and we demonstrate it on modelling and verification approaches developed within the research groups at DTU/Bremen and at Surrey...

  14. A Verification Logic for GOAL Agents

    Science.gov (United States)

    Hindriks, K. V.

    Although there has been a growing body of literature on verification of agents programs, it has been difficult to design a verification logic for agent programs that fully characterizes such programs and to connect agent programs to agent theory. The challenge is to define an agent programming language that defines a computational framework but also allows for a logical characterization useful for verification. The agent programming language GOAL has been originally designed to connect agent programming to agent theory and we present additional results here that GOAL agents can be fully represented by a logical theory. GOAL agents can thus be said to execute the corresponding logical theory.

  15. Constraint specialisation in Horn clause verification

    DEFF Research Database (Denmark)

    Kafle, Bishoksan; Gallagher, John Patrick

    2017-01-01

    We present a method for specialising the constraints in constrained Horn clauses with respect to a goal. We use abstract interpretation to compute a model of a query–answer transformed version of a given set of clauses and a goal. The constraints from the model are then used to compute...... underlying the clauses. Experimental results on verification problems show that this is an effective transformation, both in our own verification tools (based on a convex polyhedra analyser) and as a pre-processor to other Horn clause verification tools....

  16. Trainer-to-student ratios for teaching psychomotor skills in health care fields, as applied to osteopathic manipulative medicine.

    Science.gov (United States)

    Snider, Karen T; Seffinger, Michael A; Ferrill, Heather P; Gish, Eric E

    2012-04-01

    The hallmark of osteopathic medical education is the inclusion of hands-on instruction in osteopathic manipulative medicine (OMM), which includes palpatory diagnosis and osteopathic manipulative treatment (OMT). This OMM training typically involves a primary instructor presenting theory and techniques with step-by-step demonstrations to a large group of first- and second-year osteopathic medical students. Additional instructors, referred to as table trainers, assist the primary instructor by supervising the students as they practice the presented techniques. To the authors' knowledge, there is no currently accepted standard for a table trainer-to-student ratio in OMM skills laboratories within osteopathic medical schools in the United States. However, through a Google Web search and PubMed literature review, the authors identified published trainer-to-student ratios used in other health care skills training curricula. Psychomotor skills training courses in health care fields typically have a table trainer-to-student ratio of 1 trainer to 8 or fewer students. On the basis of these findings and psychomotor skills learning theory, the authors conclude that this ratio is likely sufficient for OMM skills training.

  17. Design for Verification: Enabling Verification of High Dependability Software-Intensive Systems

    Science.gov (United States)

    Mehlitz, Peter C.; Penix, John; Markosian, Lawrence Z.; Koga, Dennis (Technical Monitor)

    2003-01-01

    Strategies to achieve confidence that high-dependability applications are correctly implemented include testing and automated verification. Testing deals mainly with a limited number of expected execution paths. Verification usually attempts to deal with a larger number of possible execution paths. While the impact of architecture design on testing is well known, its impact on most verification methods is not as well understood. The Design for Verification approach considers verification from the application development perspective, in which system architecture is designed explicitly according to the application's key properties. The D4V-hypothesis is that the same general architecture and design principles that lead to good modularity, extensibility and complexity/functionality ratio can be adapted to overcome some of the constraints on verification tools, such as the production of hand-crafted models and the limits on dynamic and static analysis caused by state space explosion.

  18. International Energy Agency Ocean Energy Systems Task 10 Wave Energy Converter Modeling Verification and Validation

    DEFF Research Database (Denmark)

    Wendt, Fabian F.; Yu, Yi-Hsiang; Nielsen, Kim

    2017-01-01

    This is the first joint reference paper for the Ocean Energy Systems (OES) Task 10 Wave Energy Converter modeling verification and validation group. The group is established under the OES Energy Technology Network program under the International Energy Agency. OES was founded in 2001 and Task 10 ...

  19. Report on the results of the Sunshine Project - Verification survey for geothermal exploration technology, etc. Summary. Survey of deep geothermal resource; Chinetsu tansa gijutsu tou kensho chosa. Shinbu chinetsu shigen chosa sokatsu seika hokokusho (Yoyaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    As to the development of deep geothermal resource which is expected to contribute to increasing the capacity of future power generation in Japan, investigational study was made from FY 1992 to FY 2000, and the results were summed up. The investigational study was conducted for the hydrothermal convection type deep geothermal resource with a thermal conducting heating mechanism, of which Kakkonda is typical, including the drilling of deep exploration well using the existing technology. As a result, new information/knowledge were acquired about the thermal structure, reservoir structure and hydrothermal supply structure of the depths, and a deep geothermal model was made. Based on the model, a detailed simulation was made possible, and a whole image of the hydrothermal convection type deep geothermal resource with the thermal conducting heating mechanism was made clear. In the surface survey, observation of microearthquakes, high-accuracy MT method, etc. were carried out, and a grasp of the shape of a new granite body from the surface was made possible. Concerning the drilling technology, the geologic stratum with a temperature over 500 degrees C was successfully drilled down to a depth of 3,729m by prolonging the life of bit at the time of drilling by introducing the top drive system, the closed mud cooling device, etc. (NEDO)

  20. Job Change and Workplace Learning in the Public Sector: The Significance of New Technology for Unskilled Work.

    Science.gov (United States)

    Munro, Anne; Rainbird, Helen

    2002-01-01

    Interviews (n=350) and a survey (n=323) of managers, trainers, and union representatives in British health care agencies showed that technology caused some job enlargement and enrichment; positive or negative effects depended on context. Other jobs were deskilled due to work organization, not technology. Technology's impact on job change was…