Development of Beam Utilization Technologies and Support for Users

International Nuclear Information System (INIS)

Kim, Kyeryung; Jung, Myunghwan; Noh, Yongoh; Lee, Sooyeon; Kim, Hyukwook; Kil, Jaekeun; Lee, Nayoung; Ra, Sekin; Lee, Miejeen; Kim, Sora

2013-02-01

The Final goals are to achieve the 2nd goals of the Proton Engineering Frontier Project, development of proton beam utilization technologies, to incubate the potential users, and to develop fundamental technologies. Based on these achievements, we are going to enhance the accelerator utilization and maximize contribution to the local society after accelerator construction completion. For the these goals, we were operating user program reflecting the results of 3rd step planning. We support 38 small projects during 2 years. As results of activation of beam utilization, we acquired 768 users at the end of 2012. We survey proton beam technology proposals, individuals and institutions participation letter of intent through the research of 'Planning of a support program for both basic research by using accelerator and manpower cultivation'. And inaugurated KOPUA (Korea Proton Accelerator User Association) on March 28, 2012 with 152 members. We secured experimental conditions at TR23 and TR103 and reflected in the target room design and operation scenarios via investigate the requirements. Through these requirements, we make a remote sample transfer system, beam regulating system, hot cell and sample transport container. Moreover, we develop proton beam technologies such as in-vivo proton beam irradiation system, comparison of the biological effects for pulse beam and continuous beam, basic experiments for the metal nanopaticle synthesis, research for radioactivatied samples and devices, conceptual design and calculation for neutron source target and calculation of the isotope production yield. Proton accelerator can be utilized in a variety of field, including NT, BT, IT, ST, ET, Nuclear, medical, and some of the user facilities required were constructed through this project, Experience for the construction and operation of these facilities can be reflected to the construction of the rest 8 target room of proton accelerator center

Recent trend in coal utilization technology. Coal utilization workshop

Energy Technology Data Exchange (ETDEWEB)

Kim, Chon Ho; Son, Ja Ek; Lee, In Chul; Jin, Kyung Tae; Kim, Seong Soo [Korea Inst. of Energy Research, Taejon (Korea, Republic of)

1995-12-01

The 11th Korea-U.S.A. joint workshop on coal utilization technology was held in somerset, Pennsylvania, U.S.A. from october 2 to 3, 1995. In the opening ceremony, Dr.C. Low-el Miller, associate deputy assistant secretary of office of clean coal technology, U.S.DOE, gave congratulatory remarks and Dr. Young Mok Son, president of KIER, made a keynote address. In this workshop, 30 papers were presented in the fields of emission control technology, advanced power generation systems, and advanced coal cleaning and liquid fuels. Especially, from the Korean side, not only KIER but also other private research institutes and major engineering companies including KEPCO, Daewoo Institute of Construction Technology, Jindo Engineering and Construction Co. Daewoo Institute for Advanced Engineering and universities participated in this workshop, reflecting their great interests. Attendants actively discussed about various coal utilization technologies and exchanged scientific and technical information on the state-of-art clean coal technologies under development. (author)

Technology transfer program at the Morgantown Energy Technology Center: FY 87 program report

Energy Technology Data Exchange (ETDEWEB)

Brown, W.A.; Lessing, K.B.

1987-10-01

The Morgantown Energy Technology Center (METC), located in Morgantown, West Virginia, is an energy research center of the US Department of Energy's (DOE's) Office of Fossil Energy. The research and development work is different from research work conducted by other Government agencies. In DOE research, the Government is not the ultimate ''customer'' for the technologies developed; the ''customer'' is business and industry in the private sector. Thus, tehcnology transfer is a fundamental goal of the DOE. The mission of the Fossil Energy program is to enhance the use of the nations's fossil energy resources. METC's mission applies to certain technologies within the broad scope of technologies encompassed by the Office of Fossil Energy. The Government functions as an underwriter of risk and as a catalyst to stimulate the development of technologies and technical information that might otherwise proceed at a slower pace because of the high-risk nature of the research involved. The research programs and priorities are industry driven; the purpose is to address the perceived needs of industry such that industry will ultimately bring the technologies to the commercial market. As evidenced in this report, METC has an active and effective technology transfer program that is incorporated into all aspects of project planning and execution. Technology transfer at METC is a way of life---a part of everyday activities to further this goal. Each person has a charge to communicate the ideas from within METC to those best able to utilize that information. 4 figs., 20 tabs.

Technologies for learner-centered feedback

Directory of Open Access Journals (Sweden)

Jane Costello

2013-09-01

Full Text Available As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes. Feedback, types of feedback, guidelines for effective learner-centered feedback, and feedback’s relationship to assessment are presented. Methods of providing feedback, for example, automated, audio scribe pens, digital audio, etc., and the related technologies are described. Technologies that allow instructors to make informed decisions about the use of various methods for feedback are discussed.

Utilization of a Sobering Center for Acute Alcohol Intoxication.

Science.gov (United States)

Smith-Bernardin, Shannon; Carrico, Adam; Max, Wendy; Chapman, Susan

2017-09-01

The objective was to describe the population utilizing a sobering center for public alcohol intoxication and compare between single-visit users, repeat users, and high users. We conducted a secondary analysis of 1,271 adults cared for in a sobering center from July 2014 to June 2015. We divided the population into three groups-single use (one visit), repeat users (two to five visits), and high (six or more) users-and evaluated demographics, lifetime health diagnoses utilizing the Elixhauser Comorbidity Index, rates of public service utilization including ambulance and emergency department, and related costs. The population was primarily male, middle-aged, and ethnically diverse. Compared to single-visit users (n = 869), repeat (n = 287) and high users (n = 115) were older, were more likely to be currently homeless, and had spent more time homeless. Repeat and high users had significantly higher rates of hypertension, liver disease, diabetes, depression, psychoses, and drug abuse diagnoses compared to single-visit users. In addition to sobering visits, utilization of ambulance and ED and related costs were significantly greater for the high users compared to repeat and single-visit users. From an overall heterogeneous population, more frequent utilizers of the sobering center, both high and repeat users compared to low users, had significantly greater prevalence of chronic disorders, service utilization, and homelessness. Findings indicate that a sobering center can have a prominent role in the care for those with acute alcohol intoxication, particularly those individuals with chronic public intoxication who are likewise homeless. Further longitudinal research could offer important insights as to the population served over time, investigating changes in utilization and efforts toward health and housing stabilization. © 2017 by the Society for Academic Emergency Medicine.

2017 Technology Showcase | NCI Technology Transfer Center | TTC

Science.gov (United States)

The 2017 Technology Showcase is an inaugural, half-day event showcased technologies developed by the National Cancer Institute's Center for Cancer Research (CCR) and the Frederick National Laboratory for Cancer Research (FNLCR).

Energetics Manufacturing Technology Center (EMTC)

Data.gov (United States)

Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

Center for Advanced Computational Technology

Science.gov (United States)

Noor, Ahmed K.

2000-01-01

The Center for Advanced Computational Technology (ACT) was established to serve as a focal point for diverse research activities pertaining to application of advanced computational technology to future aerospace systems. These activities include the use of numerical simulations, artificial intelligence methods, multimedia and synthetic environments, and computational intelligence, in the modeling, analysis, sensitivity studies, optimization, design and operation of future aerospace systems. The Center is located at NASA Langley and is an integral part of the School of Engineering and Applied Science of the University of Virginia. The Center has four specific objectives: 1) conduct innovative research on applications of advanced computational technology to aerospace systems; 2) act as pathfinder by demonstrating to the research community what can be done (high-potential, high-risk research); 3) help in identifying future directions of research in support of the aeronautical and space missions of the twenty-first century; and 4) help in the rapid transfer of research results to industry and in broadening awareness among researchers and engineers of the state-of-the-art in applications of advanced computational technology to the analysis, design prototyping and operations of aerospace and other high-performance engineering systems. In addition to research, Center activities include helping in the planning and coordination of the activities of a multi-center team of NASA and JPL researchers who are developing an intelligent synthesis environment for future aerospace systems; organizing workshops and national symposia; as well as writing state-of-the-art monographs and NASA special publications on timely topics.

Morgantown Energy Technology Center, technology summary

International Nuclear Information System (INIS)

1994-06-01

This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. METC's R ampersand D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities

Utility deregulation and AMR technology

International Nuclear Information System (INIS)

Moore, G.

1991-01-01

This article reviews the effects of deregulation on other utilities and services and examines how the electric utilities can avoid the worst of these effects and capitalize of the best aspects of competition in achieving marketing excellence. The article presents deregulation as a customer service and underscores the need for utilities to learn to compete aggressively and intelligently and provide additional services available through technology such as automated meter reading

National Rehabilitation Hospital Assistive Technology Research Center

Science.gov (United States)

1995-10-01

Shoulder-Arm Orthoses Several years ago, the Rehabilitation Engineering Research Center (RERC) on Rehabilitation Robotics in Delaware1 identified a... exoskeletal applications for persons with disabilities. 2. Create a center of expertise in rehabilitation technology transfer that benefits persons with...AD COOPERATIVE AGREEMENT NUMBER: DAMD17-94-V-4036 TITLE: National Rehabilitation Hospital Assistive Technology- Research Center PRINCIPAL

Distributed utility technology cost, performance, and environmental characteristics

Energy Technology Data Exchange (ETDEWEB)

Wan, Y; Adelman, S

1995-06-01

Distributed Utility (DU) is an emerging concept in which modular generation and storage technologies sited near customer loads in distribution systems and specifically targeted demand-side management programs are used to supplement conventional central station generation plants to meet customer energy service needs. Research has shown that implementation of the DU concept could provide substantial benefits to utilities. This report summarizes the cost, performance, and environmental and siting characteristics of existing and emerging modular generation and storage technologies that are applicable under the DU concept. It is intended to be a practical reference guide for utility planners and engineers seeking information on DU technology options. This work was funded by the Office of Utility Technologies of the US Department of Energy.

Naval Undersea Warfare Center Division Newport utilities metering, Phase 1

Energy Technology Data Exchange (ETDEWEB)

Carroll, D.M.

1992-11-01

Pacific Northwest Laboratory developed this report for the US Navy`s Naval Undersea Warfare Center Division Newport, Rhode Island (NUWC). The purpose of the report was to review options for metering electricity and steam used in the NUWC compound, and to make recommendations to NUWC for implementation under a follow-on project. An additional NUWC concern is a proposed rate change by the servicing utility, Newport Electric, which would make a significant shift from consumption to demand billing, and what effect that rate change would have on the NUWC utility budget. Automated, remote reading meters are available which would allow NUWC to monitor its actual utility consumption and demand for both the entire NUWC compound and by end-use in individual buildings. Technology is available to perform the meter reads and manipulate the data using a personal computer with minimal staff requirement. This is not meant to mislead the reader into assuming that there is no requirement for routine preventive maintenance. All equipment requires routine maintenance to maintain its accuracy. While PNL reviewed the data collected during the site visit, however, it became obvious that significant opportunities exist for reducing the utility costs other than accounting for actual consumption and demand. Unit costs for both steam and electricity are unnecessarily high, and options are presented in this report for reducing them. Additionally, NUWC has an opportunity to undertake a comprehensive energy resource management program to significantly reduce its energy demand, consumption, and costs.

Naval Undersea Warfare Center Division Newport utilities metering, Phase 1

Energy Technology Data Exchange (ETDEWEB)

Carroll, D.M.

1992-11-01

Pacific Northwest Laboratory developed this report for the US Navy's Naval Undersea Warfare Center Division Newport, Rhode Island (NUWC). The purpose of the report was to review options for metering electricity and steam used in the NUWC compound, and to make recommendations to NUWC for implementation under a follow-on project. An additional NUWC concern is a proposed rate change by the servicing utility, Newport Electric, which would make a significant shift from consumption to demand billing, and what effect that rate change would have on the NUWC utility budget. Automated, remote reading meters are available which would allow NUWC to monitor its actual utility consumption and demand for both the entire NUWC compound and by end-use in individual buildings. Technology is available to perform the meter reads and manipulate the data using a personal computer with minimal staff requirement. This is not meant to mislead the reader into assuming that there is no requirement for routine preventive maintenance. All equipment requires routine maintenance to maintain its accuracy. While PNL reviewed the data collected during the site visit, however, it became obvious that significant opportunities exist for reducing the utility costs other than accounting for actual consumption and demand. Unit costs for both steam and electricity are unnecessarily high, and options are presented in this report for reducing them. Additionally, NUWC has an opportunity to undertake a comprehensive energy resource management program to significantly reduce its energy demand, consumption, and costs.

Supporting learner-centered technology integration through situated mentoring

Science.gov (United States)

Rosenberg, Marian Goode

Situated mentoring was used as a professional development method to help 11 high school science teachers integrate learner-centered technology. The teachers' learner-centered technology beliefs and practices as well as their perception of barriers to learner-centered technology integration were explored before and after participating in the mentoring program. In addition, the participants' thoughts about the effectiveness of various components of the mentoring program were analyzed along with the mentor's observations of their practices. Situated mentoring can be effective for supporting learner-centered technology integration, in particular decreasing the barriers teachers experience. Goal setting, collaborative planning, reflection, and onsite just-in-time support were thought to be the most valuable components of the mentoring program.

Increasing Counseling Center Utilization: Yeshiva University's Experience

Science.gov (United States)

Schwartz, Victor; Nissel, Chaim; Eisenberg, Daniel; Kay, Jerald; Brown, Joshua T.

2012-01-01

Yeshiva University established a counseling center during the 2004-2005 academic year. As a religiously based institution, the administration recognized that there would likely be significant impediments to utilization of on-campus mental health services as a result of negative attitudes about mental illness and its treatment--stigma. To combat…

The Stanford University US-Japan Technology Management Center

National Research Council Canada - National Science Library

Dasher, Richard

2002-01-01

This grant established the U.S.-Japan Technology Management Center, Stanford University School of Engineering, as an ongoing center of excellence for the study of emerging trends and interrelationships between technology...

Clean energy utilization technology

International Nuclear Information System (INIS)

Honma, Takuya

1992-01-01

The technical development of clean energy including the utilization of solar energy was begun in 1973 at the time of the oil crisis, and about 20 years elapsed. Also in Japan, the electric power buying system by electric power companies for solar light electric power and wind electric power has been started in 1992, namely their value as a merchandise was recognized. As for these two technologies, the works of making the international standards and JIS were begun. The range of clean energy or natural energy is wide, and its kinds are many. The utilization of solar heat and the electric power generation utilizing waves, tide and geotherm already reached the stage of practical use. Generally in order to practically use new energy, the problem of price must be solved, but the price is largely dependent on the degree of spread. Also the reliability, durability and safety must be ensured, and the easiness of use, effectiveness and trouble-saving maintenance and operation are required. For the purpose, it is important to packaging those skillfully in a system. The cases of intelligent natural energy systems are shown. Solar light and wind electric power generation systems and the technology of transporting clean energy are described. (K.I.)

Technologies for Learner-Centered Feedback

Science.gov (United States)

Costello, Jane; Crane, Daph

2013-01-01

As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes.…

Manpower development and international cooperation in Nuclear Technology and Education Center, JAERI

International Nuclear Information System (INIS)

Shiba, Koreyuki; Tojo, Takao; Takada, Kazuo; Nomura, Masayuki

1996-01-01

Nuclear Technology and Education Center was founded in 1958 and now has two branches, Tokyo Education Center at Bunkyo-ku, Tokyo and Tokai Education Center at Tokai, Ibaraki-ken. The objective was to educate and train nuclear engineers and scientists for implementing the nation's program of atomic energy research, development and utilization. A variety of training courses have been prepared and carried out to meet the requirements of the nuclear community. In recent years, activities of getting the public acceptance have become important for nuclear energy deployment in Japan. Many short courses have been implemented at JAERI sites and cities for providing the public including high school teachers with basic knowledge on nuclear energy. International training programs of the center were started with the cooperation of the Japan International Cooperation Agency (JICA) in 1985 and of the International Atomic Energy Agency (IAEA) in 1987. International seminars were implemented for improving nuclear safety by inviting participants from the former Soviet Union, central/east European countries and the neighboring countries of Japan under the direction of the Science and Technology Agency (STA) in 1992. STA and JAERI are starting new programs of helping Asian and Pacific countries to develop nuclear manpower. (author)

From Lunar Regolith to Fabricated Parts: Technology Developments and the Utilization of Moon Dirt

Science.gov (United States)

McLemore, C. A.; Fikes, J. C.; McCarley, K. S.; Good, J. E.; Gilley, S. D.; Kennedy, J. P.

2008-01-01

The U.S. Space Exploration Policy has as a cornerstone the establishment of an outpost on the moon. This lunar outpost wil1 eventually provide the necessary planning, technology development, testbed, and training for manned missions in the future beyond the Moon. As part of the overall activity, the National Aeronautics and Space Administration (NASA) is investigating how the in situ resources can be utilized to improve mission success by reducing up-mass, improving safety, reducing risk, and bringing down costs for the overall mission. Marshall Space Flight Center (MSFC), along with other NASA centers, is supporting this endeavor by exploring how lunar regolith can be mined for uses such as construction, life support, propulsion, power, and fabrication. An infrastructure capable of fabrication and nondestructive evaluation will be needed to support habitat structure development and maintenance, tools and mechanical parts fabrication, as well as repair and replacement of space-mission hardware such as life-support items, vehicle components, and crew systems, This infrastructure will utilize the technologies being developed under the In Situ Fabrication and Repair (ISFR) element, which is working in conjunction with the technologies being developed under the In Situ Resources Utilization (ISRU) element, to live off the land. The ISFR Element supports the Space Exploration Initiative by reducing downtime due to failed components; decreasing risk to crew by recovering quickly from degraded operation of equipment; improving system functionality with advanced geometry capabilities; and enhancing mission safety by reducing assembly part counts of original designs where possible. This paper addresses the need and plan for understanding the properties of the lunar regolith to determine the applicability of using this material in a fabrication process. This effort includes the development of high fidelity simulants that will be used in fabrication processes on the ground to

Summary of the function and the safety design of the Tokai Reprocessing Utility Center

International Nuclear Information System (INIS)

Yanai, Chisato; Yamazaki, Toshihiko; Tomita, Tsuneo; Horii, Shinichi; Uryu, Mituru; Ishiguro, Nobuharu; Kobayashi, Kentarou

1998-01-01

The Tokai Reprocessing Utility Center is a new facility to replace the utilities to the Tokai Reprocessing Plant such as the emergency power supply, compressed air, etc. which are scattered about the site and have became superannuated. The Facility building has a base-isolation system that is a strongly resistant to earthquake. After completion, the center will supply utilities to the Main Plant, the Central Building, the Auxiliary Active Facility, etc. of the Tokai Reprocessing Plant. This document outlines the function and the safety design of the Tokai Reprocessing Utility Center. (author)

Allocation of Tutors and Study Centers in Distance Learning Using Geospatial Technologies

Directory of Open Access Journals (Sweden)

Shahid Nawaz Khan

2018-05-01

Full Text Available Allama Iqbal Open University (AIOU is Pakistan’s largest distance learning institute, providing education to 1.4 million students. This is a fairly large setup across a country where students are highly geographically distributed. Currently, the system works using a manual approach, which is not efficient. Allocation of tutors and study centers to students plays a key role in creating a better learning environment for distance learning. Assigning tutors and study centers to distance learning students is a challenging task when there is a huge geographic spread. Using geospatial technologies in open and distance learning can fix allocation problems. This research analyzes real data from the twin cities Islamabad and Rawalpindi. The results show that geospatial technologies can be used for efficient and proper resource utilization and allocation, which in turn can save time and money. The overall idea fits into an improved distance learning framework and related analytics.

76 FR 39811 - International Center for Technology Assessment and the Center for Food Safety; Noxious Weed...

Science.gov (United States)

2011-07-07

... dated July 18, 2002, the International Center for Technology Assessment and the Center for Food Safety... Inspection Service [Docket No. APHIS-2011-0081] International Center for Technology Assessment and the Center for Food Safety; Noxious Weed Status of Kentucky Bluegrass Genetically Engineered for Herbicide...

A feasibility study for a manufacturing technology deployment center

Energy Technology Data Exchange (ETDEWEB)

1994-10-31

The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

Process Engineering Technology Center Initiative

Science.gov (United States)

Centeno, Martha A.

2002-01-01

NASA's Kennedy Space Center (KSC) is developing as a world-class Spaceport Technology Center (STC). From a process engineering (PE) perspective, the facilities used for flight hardware processing at KSC are NASA's premier factories. The products of these factories are safe, successful shuttle and expendable vehicle launches carrying state-of-the-art payloads. PE is devoted to process design, process management, and process improvement, rather than product design. PE also emphasizes the relationships of workers with systems and processes. Thus, it is difficult to speak of having a laboratory for PE at K.S.C. because the entire facility is practically a laboratory when observed from a macro level perspective. However, it becomes necessary, at times, to show and display how K.S.C. has benefited from PE and how K.S.C. has contributed to the development of PE; hence, it has been proposed that a Process Engineering Technology Center (PETC) be developed to offer a place with a centralized focus on PE projects, and a place where K.S.C.'s PE capabilities can be showcased, and a venue where new Process Engineering technologies can be investigated and tested. Graphics for showcasing PE capabilities have been designed, and two initial test beds for PE technology research have been identified. Specifically, one test bed will look into the use of wearable computers with head mounted displays to deliver work instructions; the other test bed will look into developing simulation models that can be assembled into one to create a hierarchical model.

Development of technologies for utilizing geothermal energy

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

In verifying the effectiveness of the deep geothermal resource exploration technology, development is being carried out on a fracture-type reservoir exploration method. The seismic exploration method investigates detailed structures of underground fracture systems by using seismic waves generated on the ground surface. Verification experiments for fiscal 1994 were carried out by selecting the Kakkonda area in which small fracture networks form reservoir beds. Geothermal resources in deep sections (deeper than 2000 m with temperatures higher than 350{degree}C) are promising in terms of amount of the resources, but anticipated with difficulty in exploration and impediments in drilling. To avoid these risks, studies are being progressed on the availability of resources in deep sections, their utilization possibility, and technologies of effective exploration and drilling. This paper summarizes the results of deep resource investigations during fiscal 1994. It also describes such technological development as hot water utilizing power generation. Development is performed on a binary cycle power generation plant which pumps and utilizes hot water of 150 to 200{degree}C by using a downhole pump. The paper also reports development on element technologies for hot rock power generation systems. It also dwells on development of safe and effective drilling and production technologies for deep geothermal resources.

Utilization of Mental Health Services in School-Based Health Centers

Science.gov (United States)

Bains, Ranbir M.; Cusson, Regina; White-Frese, Jesse; Walsh, Stephen

2017-01-01

Background: We summarize utilization patterns for mental health services in school-based health centers. Methods: Administrative data on school-based health center visits in New Haven, Connecticut were examined for the 2007-2009 school years. Relative frequencies of mental health visits by age were calculated as a percentage of all visits and were…

Specialization and utilization after hepatectomy in academic medical centers.

Science.gov (United States)

Shaw, Joshua J; Santry, Heena P; Shah, Shimul A

2013-11-01

Specialized procedures such as hepatectomy are performed by a variety of specialties in surgery. We aimed to determine whether variation exists among utilization of resources, cost, and patient outcomes by specialty, surgeon case volume, and center case volume for hepatectomy. We queried centers (n = 50) in the University Health Consortium database from 2007-2010 for patients who underwent elective hepatectomy in which specialty was designated general surgeon (n = 2685; 30%) or specialist surgeon (n = 6277; 70%), surgeon volume was designated high volume (>38 cases annually) and center volume was designated high volume (>100 cases annually). We then stratified our cohort by primary diagnosis, defined as primary tumor (n = 2241; 25%), secondary tumor (n = 5466; 61%), and benign (n = 1255; 14%). Specialist surgeons performed more cases for primary malignancy (primary 26% versus 15%) while general surgeons operated more for secondary malignancies (67% versus 61%) and benign disease (18% versus 13%). Specialists were associated with a shorter total length of stay (LOS) (5 d versus 6 d; P specialization, surgeon volume and center volume may be important metrics for quality and utilization in complex procedures like hepatectomy. Further studies are necessary to link direct factors related to hospital performance in the changing healthcare environment. Copyright © 2013 Elsevier Inc. All rights reserved.

The Electronic Health Literacy and Utilization of Technology for Health in a Remote Hawaiian Community: Lana'i.

Science.gov (United States)

Witten, Nash Ak; Humphry, Joseph

2018-03-01

The Lana'i Community Health Center (LCHC) like other health care organizations, is striving to implement technology-enabled care (TEC) in the clinical setting. TEC includes such technological innovations as patient portals, mobile phone applications, wearable health sensors, and telehealth. This study examines the utilization of communication technology by members of the Lana'i community and LCHC staff and board members in the home and in their daily lives and evaluates the community's electronic health literacy. Quantitative surveys and qualitative focus groups were utilized. These revealed that members of the Lana'i community and LCHC staff and board members regularly utilize technology, in the form of smart cell phones, WiFi, and internet texting. This community has integrated technology into their daily lives, even though they live on an isolated island with 3,102 people; however, despite this integration, the electronic health literacy of this population appears insufficient for proper understanding and utilization of TEC, limiting the potential of patient portals or remote monitoring of patient generated data for chronic disease prevention and management without additional education and mentoring. It is therefore in the best interest of the LCHC and other health organizations wishing to implement TEC in a rural community such as Lana'i to include a strong educational component with use of TEC, and perhaps establish a mentor/partnership program for the highly-challenged patient.

Validating a Technology Enhanced Student-Centered Learning Model

Science.gov (United States)

Kang, Myunghee; Hahn, Jungsun; Chung, Warren

2015-01-01

The Technology Enhanced Student Centered Learning (TESCL) Model in this study presents the core factors that ensure the quality of learning in a technology-supported environment. Although the model was conceptually constructed using a student-centered learning framework and drawing upon previous studies, it should be validated through real-world…

License Agreements | NCI Technology Transfer Center | TTC

Science.gov (United States)

NCI Technology Transfer Center (TTC) licenses the discoveries of NCI and nine other NIH Institutes so new technologies can be developed and commercialized, to convert them into public health benefits.

Solar energy utilizing technology for future cities

Energy Technology Data Exchange (ETDEWEB)

Mori, Kei

1987-11-20

This report proposes solar energy utilizing technologies for future cities, centering on a system that uses Fresnel lenses and optical fiber cables. This system selects out beams in the visible range and the energy can be sent to end terminals constantly as long as sunlight is available. Optical energy is concentrated 4,000-fold. The system can provide long-distance projection of parallel rays. It will be helpful for efficient utilization of light in cities and can increase the degree of freedom in carrying out urban development. The total efficiency for the introduction into optical fiber can be up to 40 percent. With no heating coil incorporated, there is no danger of fire. The standard size of a light condenser is 2 m in dome diameter and 2.5 m in height. Auxiliary artificial light is used for backup purposes when it is cloudy. Heat pumps operating on solar thermal energy are employed to maintain air conditioning for 24 hours a day in order to ensure the establishment of an environment where residential areas exist in the neighborhood of office areas. Seven automatic solar light collection and transfer systems are currently in practical use at the Arc Hills building. The combination of Fresnel lens and optical fiber is more than six times as high in efficiency as a reflecting mirror. (5 figs, 3 tabs, 8 photos, 6 refs)

The 10th Anniversary Of Daejeon Environmental Technology Development Center

International Nuclear Information System (INIS)

2010-12-01

This book describes the Daejeon Environment Technology Development Center with pictures for ten years. It also introduces the purpose of the foundation and background of center, structure of the center, main project and role of the center, center logo, current situation of cost of project, research business for 10 years, business supporting the environmental corporate, environment education, public relations activity and vision and prospect of the Daejeon Environmental Technology Development Center.

Solar Technology Center

Energy Technology Data Exchange (ETDEWEB)

Boehm, Bob

2011-04-27

The Department of Energy, Golden Field Office, awarded a grant to the UNLV Research Foundation (UNLVRF) on August 1, 2005 to develop a solar and renewable energy information center. The Solar Technology Center (STC) is to be developed in two phases, with Phase I consisting of all activities necessary to determine feasibility of the project, including design and engineering, identification of land access issues and permitting necessary to determine project viability without permanently disturbing the project site, and completion of a National Environmental Policy Act (NEPA) Environmental Assessment. Phase II is the installation of infrastructure and related structures, which leads to commencement of operations of the STC. The STC is located in the Boulder City designated 3,000-acre Eldorado Valley Energy Zone, approximately 15 miles southwest of downtown Boulder City and fronting on Eldorado Valley Drive. The 33-acre vacant parcel has been leased to the Nevada Test Site Development Corporation (NTSDC) by Boulder City to accommodate a planned facility that will be synergistic with present and planned energy projects in the Zone. The parcel will be developed by the UNLVRF. The NTSDC is the economic development arm of the UNLVRF. UNLVRF will be the entity responsible for overseeing the lease and the development project to assure compliance with the lease stipulations established by Boulder City. The STC will be operated and maintained by University of Nevada, Las Vegas (UNLV) and its Center for Energy Research (UNLV-CER). Land parcels in the Eldorado Valley Energy Zone near the 33-acre lease are committed to the construction and operation of an electrical grid connected solar energy production facility. Other projects supporting renewable and solar technologies have been developed within the energy zone, with several more developments in the horizon.

Utilizing Information Technology to Facilitate Rapid Acquisition

Science.gov (United States)

2006-06-01

PAGES 109 14. SUBJECT TERMS Rapid Acquisition, eCommerce , eProcurement, Information Technology, Contracting, Global Information Network...Agency. 5 eCommerce and eProcurement, and possess an adequate knowledge of information technology. D. RESEARCH QUESTIONS 1. Primary Research... eCommerce , Information Technology, and eProcurement knowledge, and government and private industry reports utilizing numerous library and Internet

Development of technologies for solar energy utilization

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

With relation to the development of photovoltaic power systems for practical use, studies were made on thin-substrate polycrystalline solar cells and thin-film solar cells as manufacturing technology for solar cells for practical use. The technological development for super-high efficiency solar cells was also being advanced. Besides, the research and development have been conducted of evaluation technology for photovoltaic power systems and systems to utilize the photovoltaic power generation and peripheral technologies. The demonstrative research on photovoltaic power systems was continued. The international cooperative research on photovoltaic power systems was also made. The development of a manufacturing system for compound semiconductors for solar cells was carried out. As to the development of solar energy system technologies for industrial use, a study of elemental technologies was first made, and next the development of an advanced heat process type solar energy system was commenced. In addition, the research on passive solar systems was made. An investigational study was carried out of technologies for solar cities and solar energy snow melting systems. As international joint projects, studies were made of solar heat timber/cacao drying plants, etc. The paper also commented on projects for international cooperation for the technological development of solar energy utilization systems. 26 figs., 15 tabs.

Sandia National Laboratories: Microsystems Science & Technology Center

Science.gov (United States)

Environmental Management System Pollution Prevention History 60 impacts Diversity Locations Facts & Figures Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers

Utilization Of Information And Communication Technology (ICT) For ...

African Journals Online (AJOL)

Utilization Of Information And Communication Technology (ICT) For Information Service Delivery In University Libraries In Adamawa State. ... inability to provide alternative power supply are major constraints to effective utilization of the ICT.

Mid-Atlantic Technology Applications Center. Quarters 1-4

Science.gov (United States)

1997-01-01

Mid-atlantic Technology Application Center (MTAC) pursued a number of initiatives designed to enhance the strategic position of the Langley Research Center (LaRC) and NASA in industry. Among these was a closer association with the ISA, International Society for Measurement and Control. During 1997, MTAC placed articles regarding NASA-developed technologies in each In Tech magazine. The monthly magazine is sent to 46,000 sensors and instrumentation professionals. In addition, MTAC coordinated NASXs participation in the ISA Tech 97 Conference, securing $112,000 of free exhibit space, 1500 NASA sensors posters at no cost to NASA, and thousands of dollars of free publicity. MTAC was awarded a contract by ISA to operate its Technical Resource Center (TRC). The goal of this project is to determine what user needs are in order to identify opportunities for collaboration between NASA centers and companies. In addition, the TRC work will lay the groundwork for the Technology Development Consortium (TDC) proposed by MTAC. The purpose of the TDC is to: match current industry needs with NASA technologies available now, and to identify future needs of NASA and industry which may lead to dual use projects. The goal of these activities is twofold: to infuse NASA technologies into the sensors and instrumentation industry and to secure industry funds to support NASA technology development projects. The instrumentation and sensors industry is valued at $30 billion worldwide, with $12 billion in sales in the United States. The growth rate averages 13.5%, so that by the year 2000, the industry will produce products worth $49 billion. More than 80% of instruments, sensors and control systems are currently manufactured in the United States. NASA and the industry do not have a history of collaborative projects; MTAC's initiatives in this area are designed to foster working relationships between the two parties that will help maintain U.S. leadership in this field. Mid-atlantic Technology

Utilization technology on slurried ash

Energy Technology Data Exchange (ETDEWEB)

Kanbe, Yoshio; Yasuda, Minoru; Furuki, Yasuhiko [The Coal Mining Research Centre, Japan, Tokyo, Japan; Electric Power Development Co., Ltd., Tokyo (Japan))

1987-08-01

Three research results of the utilization technology on slurried ash were reported. As for the utilization as the fly ash quick setting (FQS) backfill grout for tail void in shield works of tunneling, grout blending was simplified, the blended solution of cement, clay, additives and water was stabilized, and a favorable workability and long term durability were obtained. As for the utilization as the material of a SMW (soil mixing wall) method for continuous walls in long shaft digging, a fly ash-gypsum-cement (FGC) stabilizer showed an excellent workability and remarkably high water-tightness as compared with conventional cement bentonite. As for the utilization as the material of an injection method of overlay mats in foundation works of light weight structures on the sea bed mud foundation, since a FGC concrete weight in water was remarkably light as 0.7t/m{sup 3}, no both large mold form strength and vibration compacting were required. 10 figs., 8 tabs.

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-10-31

The Deactivation and Decommissioning (D&D) Technology Assessment Program (TAP) was developed to provide detailed, comparable data for environmental technologies and to disseminate this data to D&D professionals in a manner that will facilitate the review and selection of technologies to perform decontamination and decommissioning. The objectives for this project include the following: Determine technology needs through review of the Site Technology Coordination Group (STCG) information and other applicable websites and needs databases; Perform a detailed review of industries that perform similar activities as those required in D&D operations to identify additional technologies; Define the technology assessment program for characterization and waste management problem sets; Define the data management program for characterization, dismantlement, and waste management problem sets; Evaluate baseline and innovative technologies under standard test conditions at Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) and other locations and collect data in the areas of performance, cost, health and safety, operations and maintenance, and primary and secondary waste generation; Continue to locate, verify, and incorporate technology performance data from other sources into the multimedia information system; and Develop the conceptual design for a dismantlement technology decision analysis tool for dismantlement technologies.

CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Hugh W. Rimmer

2004-05-12

This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

Gas utilization technologies

International Nuclear Information System (INIS)

Biljetina, R.

1994-01-01

One of the constant challenges facing the research community is the identification of technology needs 5 to 15 years from now. A look back into history indicates that the forces driving natural gas research have changed from decade to decade. In the 1970s research was driven by concerns for adequate supply; in the 1980s research was aimed at creating new markets for natural gas. What then are the driving forces for the 1990s? Recent reports from the natural gas industry have helped define a new direction driven primarily by market demand for natural gas. A study prepared by the Interstate Natural Gas Association of America Foundation entitled ''Survey of Natural Research, Development, and Demonstration RD ampersand D Priorities'' indicated that in the 1990s the highest research priority should be for natural gas utilization and that technology development efforts should not only address efficiency and cost, but environmental and regulatory issues as well. This study and others, such as the report by the American Gas Association (A.G.A.) entitled ''Strategic Vision for Natural Gas Through the Year 2000,'' clearly identify the market sectors driving today's technology development needs. The biggest driver is the power generation market followed by the industrial, transportation, appliance, and gas cooling markets. This is best illustrated by the GRI 1994 Baseline Projection on market growth in various sectors between the year 1992 and 2010. This paper highlights some of the recent technology developments in each one of these sectors

Research and technology, 1991. Langley Research Center

Science.gov (United States)

1992-01-01

The mission of the NASA Langley Research Center is to increase the knowledge and capability of the United States in a full range of aeronautics disciplines and in selected space disciplines. This mission will be accomplished by performing innovative research relevant to national needs and Agency goals, transferring technology to users in a timely manner, and providing development support to other United States Government agencies, industry, and other NASA centers. Highlights are given of the major accomplishments and applications that have been made during the past year. The highlights illustrate both the broad range of the research and technology (R&T) activities at NASA Langley Research Center and the contributions of this work toward maintaining United States leadership in aeronautics and space research.

UNDER-UTILIZATION OF COMMUNITY HEALTH CENTERS IN PURWOREJO REGENCY, CENTRAL JAVA

Directory of Open Access Journals (Sweden)

Atik Triratnawati

2006-06-01

Full Text Available The basic strategy of the Ministry of Health to achieve Health For All In Indonesia 2010 is through health paradigm, decentralization, professionalism and health service management. Community health centers play an important role to achieve the goal. Unfortunately, underutilization of community health centers is still a problem in Purworejo. The purpose of this study was to know the utilization of community health centers using a sociological health approach. Qualitative research by observation, in-depth interview and focus group discussion were done among different types of group. The study was done in Purworejo District on February and March 2000. The main problems related to underutilization of community health centers are mostly on administration (less quality services, un-efficient, long hours waiting, strong bureaucratic system (physician has a dominant power, overlapping programs, poor coordination and integration with other divisions and cultural behavior of the community (labeling/stigma, self-care dominant, lack of community participation. To overcome under-utilization of community health centers the administration and bureaucracy should be changed into more efficient, not bureaucratic management. In addition social changes of the community culture is needed. As a consequence through these changes the staff of the health centers will be more efficient and effective.

CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2005-11-04

This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

Crosscutting Technology Development at the Center for Advanced Separation Technologies

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2006-09-30

This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2006-05-15

This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

UNDER-UTILIZATION OF COMMUNITY HEALTH CENTERS IN PURWOREJO REGENCY, CENTRAL JAVA

OpenAIRE

Atik Triratnawati

2006-01-01

The basic strategy of the Ministry of Health to achieve Health For All In Indonesia 2010 is through health paradigm, decentralization, professionalism and health service management. Community health centers play an important role to achieve the goal. Unfortunately, underutilization of community health centers is still a problem in Purworejo. The purpose of this study was to know the utilization of community health centers using a sociological health approach. Qualitative research by observati...

Predicting Early Center Care Utilization in a Context of Universal Access

Science.gov (United States)

Zachrisson, Henrik Daae; Janson, Harald; Naerde, Ane

2013-01-01

This paper reports predictors for center care utilization prior to 18 months of age in Norway, a country with a welfare system providing up to one-year paid parental leave and universal access to subsidized and publicly regulated center care. A community sample of 1103 families was interviewed about demographics, family, and child characteristics…

Marshall Space Flight Center Technology Investments Overview

Science.gov (United States)

Tinker, Mike

2014-01-01

NASA is moving forward with prioritized technology investments that will support NASA's exploration and science missions, while benefiting other Government agencies and the U.S. aerospace enterprise. center dotThe plan provides the guidance for NASA's space technology investments during the next four years, within the context of a 20-year horizon center dotThis plan will help ensure that NASA develops technologies that enable its 4 goals to: 1.Sustain and extend human activities in space, 2.Explore the structure, origin, and evolution of the solar system, and search for life past and present, 3.Expand our understanding of the Earth and the universe and have a direct and measurable impact on how we work and live, and 4.Energize domestic space enterprise and extend benefits of space for the Nation.

Program strategy document for the Nuclear Materials Transportation Technology Center

International Nuclear Information System (INIS)

Jefferson, R.M.

1979-07-01

A multiyear program plan is presented which describes the program of the Nuclear Materials Transportation Technology Center (TIC) at Sandia Laboratories. The work element plans, along with their corresponding work breakdown structures, are presented for TTC activities in the areas of Technology and Information Center, Systems Development, Technology, and Institutional Issues for the years from 1979 to 1985

Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

Science.gov (United States)

Nanzetta, Philip

1992-01-01

The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

Advanced clean coal utilization technologies

Energy Technology Data Exchange (ETDEWEB)

Moritomi, Hiroshi [National Inst. for Resources and Environment, Tsukuba, Ibaraki (Japan)

1993-12-31

The most important greenhouse gas is CO{sub 2} from coal utilization. Ways of mitigating CO{sub 2} emissions include the use of alternative fuels, using renewable resources and increasing the efficiency of power generation and end use. Adding to such greenhouse gas mitigation technologies, post combustion control by removing CO{sub 2} from power station flue gases and then storing or disposing it will be available. Although the post combustion control have to be evaluated in a systematic manner relating them to whether they are presently available technology, to be available in the near future or long term prospects requiring considerable development, it is considered to be a less promising option owing to the high cost and energy penalty. By contrast, abatement technologies aimed at improving conversion efficiency or reducing energy consumption will reduce emissions while having their own commercial justification.

Center for Advanced Separation Technology

Energy Technology Data Exchange (ETDEWEB)

Honaker, Rick

2013-09-30

The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, CAST is now a five-university consortium – Virginia Tech, West Virginia University, University of Kentucky, University of Utah and Montana Tech, - that is supported through U.S. DOE Cooperative Agreement No. DE-FE0000699, Center for Advanced Separation Technology. Much of the research to be conducted with Cooperative Agreement funds will be longer term, high-risk, basic research and will be carried out in two broad areas: Advanced Pre-Combustion Clean Coal Technologies and Gas-Gas Separations. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the five member universities. These were reviewed and the selected proposals were forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed below by category, along with abstracts from their final reports.

Implementation digital technologies in nuclear utilities

Energy Technology Data Exchange (ETDEWEB)

Wiegand, C.; Maselli, A.J., E-mail: Tony.Maselli@Invensys.com [Invensys Operations Management, London (United Kingdom)

2012-07-01

The introduction of digital technologies into the nuclear industry has assisted in many ways and made many of the Life Extensions and Uprates a possibility. But with this introduction of digital technologies comes some potentially challenging issues which need to be addressed for ultimate project success. This presentation discusses what a nuclear utility should consider and establish when implementing digital technologies in their plant. Digital technologies have been employed in many safety critical industries such as Aerospace, Pharmaceutical, Oil and Gas, and Chemical. However, nuclear industry implementation of digital technologies has been slow and in many ways tenuous. There are even documented operating experience events in which plant trips/SCRAMs occurred during a digital system implementation. This presentation aims to prevent those issues drawing upon the lessons learned over the past 5 years. Considerations include general challenges to overcome when implementing Digital Technologies, how to justify and execute projects, evaluation of resource knowledge, and the new challenges of Cyber Security. (author)

Implementation digital technologies in nuclear utilities

International Nuclear Information System (INIS)

Wiegand, C.; Maselli, A.J.

2012-01-01

The introduction of digital technologies into the nuclear industry has assisted in many ways and made many of the Life Extensions and Uprates a possibility. But with this introduction of digital technologies comes some potentially challenging issues which need to be addressed for ultimate project success. This presentation discusses what a nuclear utility should consider and establish when implementing digital technologies in their plant. Digital technologies have been employed in many safety critical industries such as Aerospace, Pharmaceutical, Oil and Gas, and Chemical. However, nuclear industry implementation of digital technologies has been slow and in many ways tenuous. There are even documented operating experience events in which plant trips/SCRAMs occurred during a digital system implementation. This presentation aims to prevent those issues drawing upon the lessons learned over the past 5 years. Considerations include general challenges to overcome when implementing Digital Technologies, how to justify and execute projects, evaluation of resource knowledge, and the new challenges of Cyber Security. (author)

Center for Coastline Security Technology, Year-2

National Research Council Canada - National Science Library

Glegg, Stewart; Glenn, William; Furht, Borko; Beaujean, P. P; Frisk, G; Schock, S; VonEllenrieder, K; Ananthakrishnan, P; An, E; Granata, R

2007-01-01

...), the Imaging Technology Center, the Department of Computer Science and Engineering, and the University Consortium for Intermodal Transportation Safety and Security at Florida Atlantic University...

Strategic rigidity and foresight for technology adoption among electric utilities

International Nuclear Information System (INIS)

Shah, Arsalan Nisar; Palacios, Miguel; Ruiz, Felipe

2013-01-01

The variation in the adoption of a technology as a major source of competitive advantage has been attributed to the wide-ranging strategic foresight and the integrative capability of a firm. These possible areas of competitive advantage can exist in the periphery of the firm's strategic vision and can get easily blurred as a result of rigidness and can permeate in the decision-making process of the firm. This article explores how electric utility firms with a renewable energy portfolio can become strategically rigid in terms of adoption of newer technologies. The reluctance or delay in the adoption of new technology can be characterized as strategic rigidness, brought upon as a result of a firm's core competence or core capability in the other, more conventional technology arrangement. This paper explores the implications of such rigidness on the performance of a firm and consequently on the energy eco-system. The paper substantiates the results by emphasizing the case of Iberdrola S.A., an incumbent firm as a wind energy developer and its adoption decision behavior. We illustrate that the very routines that create competitive advantage for firms in the electric utility industry are vulnerable as they might also develop as sources of competitive disadvantage, when firms confront environmental change and uncertainty. - Highlights: • Present a firm-level perspective on technology adoption behavior among electric utilities. • Firms with mature technology can become rigid towards newer technologies. • Case study analysis of a major electric utility firm. • Implications of ‘technology rigidness’ on the energy eco-system

Building Technologies Research and Integration Center (BTRIC)

Data.gov (United States)

Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

Intelligent products for enhancing the utilization of tracking technology in transportation

NARCIS (Netherlands)

Meyer, Gerben G.; Buijs, Paul; Szirbik, Nick B.; Wortmann, J.C.

2014-01-01

Purpose – Many transportation companies struggle to effectively utilize the information provided by tracking technology for performing operational control. The research as presented in this paper aims to identify the problems underlying the inability to utilize tracking technology within this

SciDAC Visualization and Analytics Center for Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Joy, Kenneth I. [Univ. of California, Davis, CA (United States)

2014-09-14

This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an "information big bang," which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies.

Utility survey on nuclear power plant siting and nuclear energy centers

International Nuclear Information System (INIS)

Cope, D.F.; Bauman, H.F.

1977-01-01

Most of the large U.S. utilities were surveyed by telephone and mail on questions concerning nuclear power plant siting and nuclear energy centers (NECs). The main purpose of the survey was for guidance of ERDA's NEC program. The questions covered the following topics: availability of sites; impact of environmental and other restraints; plans for development of multi-unit sites; interest in NEC development; interest in including fuel-cycle facilities in NECs; and opinions on the roles desired for the state and Federal governments in power plant siting. The main conclusion of the survey was that, while many utilities were considering multiple-unit sites of 2 to 5 units, none were planning larger energy centers at the present time. However, several expressed interest in NECs as a long-range future development

Utilization of maternal health services in rural primary health centers ...

African Journals Online (AJOL)

Utilization of maternal health services in rural primary health centers in Sub- Saharan Africa. ... their pregnancies were normal during antenatal care visits, hostile attitude of health workers, poverty and mode of payment. Majority of the PHCs provided antenatal, normal delivery, and post natal services. Rural mothers lacked ...

Customizing graphical user interface technology for spacecraft control centers

Science.gov (United States)

Beach, Edward; Giancola, Peter; Gibson, Steven; Mahmot, Ronald

1993-01-01

The Transportable Payload Operations Control Center (TPOCC) project is applying the latest in graphical user interface technology to the spacecraft control center environment. This project of the Mission Operations Division's (MOD) Control Center Systems Branch (CCSB) at NASA Goddard Space Flight Center (GSFC) has developed an architecture for control centers which makes use of a distributed processing approach and the latest in Unix workstation technology. The TPOCC project is committed to following industry standards and using commercial off-the-shelf (COTS) hardware and software components wherever possible to reduce development costs and to improve operational support. TPOCC's most successful use of commercial software products and standards has been in the development of its graphical user interface. This paper describes TPOCC's successful use and customization of four separate layers of commercial software products to create a flexible and powerful user interface that is uniquely suited to spacecraft monitoring and control.

university students` perception and utilization of technology

African Journals Online (AJOL)

2018-02-01

Feb 1, 2018 ... university students` perceptions and utilization of technology for learning at Haramaya University in. Ethiopia (as a ... teaching and learning in classroom can greatly enhance the ..... benefits that it should be deliver. Looking at ...

Manufacturing Technology Information Analysis Center: Knowledge Is Strength

Science.gov (United States)

Safar, Michal

1992-01-01

The Center's primary function is to facilitate technology transfer within DoD, other government agencies and industry. The DoD has recognized the importance of technology transfer, not only to support specific weapon system manufacture, but to strengthen the industrial base that sustains DoD. MTIAC uses an experienced technical staff of engineers and information specialists to acquire, analyze, and disseminate technical information. Besides ManTech project data, MTIAC collects manufacturing technology from other government agencies, commercial publications, proceedings, and various international sources. MTIAC has various means of disseminating this information. Much of the technical data is on user accessible data bases. The Center researches and writes a number of technical reports each year and publishes a newsletter monthly. Customized research is performed in response to specific inquiries from government and industry. MTIAC serves as a link between Government and Industry to strengthen the manufacturing technology base through the dissemination of advanced manufacturing information.

Research and Technology at the John F. Kennedy Space Center 1993

Science.gov (United States)

1993-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1993 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. Major areas of research include material science, advanced software, industrial engineering, nondestructive evaluation, life sciences, atmospheric sciences, environmental technology, robotics, and electronics and instrumentation.

NCI Technology Transfer Center | TTC

Science.gov (United States)

The National Cancer Institute’s Technology Transfer Center (TTC) facilitates partnerships between the NIH research laboratories and external partners. With specialized teams, TTC guides the interactions of our partners from the point of discovery to patenting, from invention development to licensing. We play a key role in helping to accelerate development of cutting-edge research by connecting our partners to NIH’s world-class researchers, facilities, and knowledge.

The EPRI NDE center after five years

International Nuclear Information System (INIS)

Dau, G.J.; Nemzek, T.A.

1985-01-01

In 1979, the Electric Power Research Institute (EPRI) established a Nondestructive Evaluation (NDE) Center. The purpose of the Center is to provide the electric utility industry with a dedicated NDE development and field-use-qualification capability. Later, the scope of activities at the NDE Center was expanded. Beginning in 1980, the BWR Owners Group (IGSCC) provided funding necessary to operate the BWR Pipe Remedy Demonstration and Training Facility. In 1984, the Maintenance Equipment Applications Center was established by EPRI. Both functions are co-located within the NDE Center. All three functions share common objectives of providing the electric utility industry with a capability dedicated to assuring reduction to practice of new or improved technology, proof testing, qualification for field use, and obtaining code and regulatory acceptance of qualified methods and training. The purpose of this paper is to describe typical activities of the Center and some of the benefits that have accrued. The next section describes the Center organization, operation, and facility, while the remaining sections discuss the technology transfer thrust and benefits

Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

Science.gov (United States)

1999-01-01

Center Director Roy Bridges (standing, center) poses with members of the Disability Awareness and Action Working Group (DAAWG), which is holding the 1999 Technology Fair Oct. 20-21 at Kennedy Space Center. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

Awarensss and utilization of information technology among ...

African Journals Online (AJOL)

The paper examines the awareness and utilization of Information Technologies among Agricultural scientists in Nigeria. Data were collected from 170 respondents with the aid of structured questionnaire and analysed using frequency, percentage, mean and Ordinary Least Square multiple regression. This study found that ...

SciDAC visualization and analytics center for enabling technology

International Nuclear Information System (INIS)

Bethel, E Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci, Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jeremy; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier

2007-01-01

The Visualization and Analytics Center for Enabling Technologies (VACET) focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang,' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision of VACET is to adapt, extend, create when necessary, and deploy visual data analysis solutions that are responsive to the needs of DOE's computational and experimental scientists. Our center is engineered to be directly responsive to those needs and to deliver solutions for use in DOE's large open computing facilities. The research and development directly target data understanding problems provided by our scientific application stakeholders. VACET draws from a diverse set of visualization technology ranging from production quality applications and application frameworks to state-of-the-art algorithms for visualization, analysis, analytics, data manipulation, and data management

LARGE-SCALE MECURY CONTROL TECHNOLOGY TESTING FOR LIGNITE-FIRED UTILITIES-OXIDATION SYSTEMS FOR WET FGD

Energy Technology Data Exchange (ETDEWEB)

Michael J. Holmes; Steven A. Benson; Jeffrey S. Thompson

2004-03-01

The Energy & Environmental Research Center (EERC) is conducting a consortium-based effort directed toward resolving the mercury (Hg) control issues facing the lignite industry. Specifically, the EERC team--the EERC, EPRI, URS, ADA-ES, Babcock & Wilcox, the North Dakota Industrial Commission, SaskPower, and the Mercury Task Force, which includes Basin Electric Power Cooperative, Otter Tail Power Company, Great River Energy, Texas Utilities (TXU), Montana-Dakota Utilities Co., Minnkota Power Cooperative, BNI Coal Ltd., Dakota Westmoreland Corporation, and the North American Coal Company--has undertaken a project to significantly and cost-effectively oxidize elemental mercury in lignite combustion gases, followed by capture in a wet scrubber. This approach will be applicable to virtually every lignite utility in the United States and Canada and potentially impact subbituminous utilities. The oxidation process is proven at the pilot-scale and in short-term full-scale tests. Additional optimization is continuing on oxidation technologies, and this project focuses on longer-term full-scale testing. The lignite industry has been proactive in advancing the understanding of and identifying control options for Hg in lignite combustion flue gases. Approximately 1 year ago, the EERC and EPRI began a series of Hg-related discussions with the Mercury Task Force as well as utilities firing Texas and Saskatchewan lignites. This project is one of three being undertaken by the consortium to perform large-scale Hg control technology testing to address the specific needs and challenges to be met in controlling Hg from lignite-fired power plants. This project involves Hg oxidation upstream of a system equipped with an electrostatic precipitator (ESP) followed by wet flue gas desulfurization (FGD). The team involved in conducting the technical aspects of the project includes the EERC, Babcock & Wilcox, URS, and ADA-ES. The host sites include Minnkota Power Cooperative Milton R. Young

Acceptability and perceived utility of drone technology among emergency medical service responders and incident commanders for mass casualty incident management.

Science.gov (United States)

Hart, Alexander; Chai, Peter R; Griswold, Matthew K; Lai, Jeffrey T; Boyer, Edward W; Broach, John

2017-01-01

This study seeks to understand the acceptability and perceived utility of unmanned aerial vehicle (UAV) technology to Mass Casualty Incidents (MCI) scene management. Qualitative questionnaires regarding the ease of operation, perceived usefulness, and training time to operate UAVs were administered to Emergency Medical Technicians (n = 15). A Single Urban New England Academic Tertiary Care Medical Center. Front-line emergency medical service (EMS) providers and senior EMS personnel in Incident Commander roles. Data from this pilot study indicate that EMS responders are accepting to deploying and operating UAV technology in a disaster scenario. Additionally, they perceived UAV technology as easy to adopt yet impactful in improving MCI scene management.

Endogenous technological change with leisure-dependent utility.

NARCIS (Netherlands)

Hek, de P.A.

1999-01-01

This paper investigates the effect of introducing leisure-dependent utility into two models of endogenous technological change. Due to the flexibility in the labour supply the dynamics of the models change significantly. It is shown that if agents attach enough value to leisure in comparison to

Utilization of cocoyam production technologies among women ...

African Journals Online (AJOL)

The study analysed utilization of improved cocoyam production technologies among women in Abia State, Nigeria. A multistage random sampling technique was used to select sixty (60) women. Data for the study were collected using a structured questionnaire and analysed with descriptive statistics and inferential statistics ...

The roles and functions of a lunar base Nuclear Technology Center

International Nuclear Information System (INIS)

Buden, D.; Angelo, J.A. Jr.

1991-01-01

This paper describes the roles and functions of a special Nuclear Technology Center which is developed as an integral part of a permanent lunar base. Numerous contemporary studies clearly point out that nuclear energy technology will play a major role in any successful lunar/Mars initiative program and in the overall establishment of humanity's solar system civilization. The key role of nuclear energy in the providing power has been recognized. A Nuclear Technology Center developed as part of of a permanent lunar base can also help bring about many other nuclear technology applications, such as producing radioisotopes for self-illumination, food preservation, waste sterilization, and medical treatment; providing thermal energy for mining, materials processing and agricultural; and as a source of emergency habitat power. Designing such a center will involve the deployment, operation, servicing and waste product management and disposal of megawatt class reactor power plants. This challenge must be met with a minimum of direct human support at the facility. Furthermore, to support the timely, efficient integration of this Nuclear Technology Center in the evolving lunar base infrastructure, an analog of such a facility will be needed here on Earth. 12 refs., 4 figs., 1 tab

Information and consulting center in plasma technologies

International Nuclear Information System (INIS)

Vizireanu, S.; Aldea, E.; Mitu, B.; Dinescu, G.

2001-01-01

Plasma technologies are clean, non-expensive, and easy to adapt to small-scale production. They are largely used in various modern sectors of research, industry, medicine, biology and environmental protection. At the present time a pressure to transfer the knowledge from education and research sectors toward the industrial ones was established by the financing policies at national and European levels. Nevertheless, mainly in the last decade, an informational gap sets up in Romania between the suppliers of know-how in the plasma technologies and their beneficiaries. The newly appearing companies have little knowledge about the possibilities of our research and education. In turn, the research and education sectors do not know what companies are using nowadays plasma technologies, what kinds of technologies are needed and what aspects should be stressed in educational activity. The Information and Consulting Center in Plasma Technologies is an infrastructure project aiming at gathering information and expertise in plasma technologies with emphasizing on the Romanian capabilities. The information is accessible via Internet at the address http://www.alpha2.infim.ro. By accessing the center web page one enters into the main menu or it is possible to navigate by choosing key words, as for instance: objectives, plasma diagnostics, plasma technologies, which are listed in a dedicated search box. The information is organized in databases. In the database frame there are three main categories, which lead to detailed information about: - Users of plasma technologies, the technology type, the address; - Suppliers of plasma technologies, including the main research institutes with links to the relating Internet sites; - Education and training centers including the universities and their departments dedicated to plasma physics. The expertise is organized in three categories. They are instrumentation and equipment, plasma diagnostics and plasma technologies. In the

Technology developments for Japanese BWR MOX fuel utilization

International Nuclear Information System (INIS)

Oguma, M.; Mochida, T.; Nomata, T.; Asahi, K.

1997-01-01

The Long-Term Program for Research, Development and Utilization of Nuclear Energy established by the Atomic Energy Commission of Japan asserts that Japan will promote systematic utilization of MOX fuel in LWRs. Based on this Japanese nuclear energy policy, we have been pushing development of MOX fuel technology aimed at future full scale utilization of this fuel in BWRs. In this paper, the main R and D topics are described from three subject areas, MOX core and fuel design, MOX fuel irradiation behaviour, and MOX fuel fabrication technology. For the first area, we explain the compatibility of MOX fuel with UO 2 core, the feasibility of the full MOX core, and the adaptability of MOX design methods based on a mock-up criticality experiment. In the second, we outline the Tsuruga MOX irradiation program and the DOMO program, and suggest that MOX fuel behaviour is comparable to ordinary BWR UO 2 fuel behaviour. In the third, we examine the development of a fully automated MOX bundle assembling apparatus and its features. (author). 14 refs, 11 figs, 3 tabs

Perspectives and utilization technologies of chicory ( Cichorium ...

African Journals Online (AJOL)

Exploring and developing multiple utility technologies of plant resources is an alternative way for improving the efficiency of land used for food and fuel production. Chicory (Cichorium intybus L.) has a nutritional quality comparable to lucerne as it contains similar proportions of protein, lipid, minerals and other nutrients.

The Center for Environmental Technology Innovative Technology Screening Process

International Nuclear Information System (INIS)

Bertrand, C.M.

1995-02-01

The Center for Environmental Technology's (CET) mission is to provide a fully integrated system for accelerated evaluation, development, commercialization, and public acceptance of creative environmental solutions which match the foremost demands in today's environmentally sensitive world. In short, CET will create a means to provide quick, effective solutions for environmental needs. To meet this mission objective, CET has created a unique and innovative approach to eliminating the usual barriers in developing and testing environmental technologies. The approach paves the way for these emerging, cutting-edge technologies by coordinating environmental restoration and waste management activities of industry, universities, and the government to: efficiently and effectively transfer technology to these users, provide market-driven, cost-effective technology programs to the public and DOE, and aid in developing innovative ideas by initiating efforts between DOE facilities and private industry. The central part to this mission is selecting and evaluating specific innovative technologies for demonstration and application at United States Department of Energy (DOE) installations. The methodology and criteria used for this selection, which is called the CET Innovative Technology Screening Process, is the subject of this paper. The selection criteria used for the screening process were modeled after other DOE technology transfer programs and were further developed by CET's Technology Screening and Evaluation Board (TSEB). The process benefits both CET and the proposing vendors by providing objective selection procedures based on predefined criteria. The selection process ensures a rapid response to proposing vendors, all technologies will have the opportunity to enter the selection process, and all technologies are evaluated on the same scale and with identical criteria

Development of beam utilization/application technology

Energy Technology Data Exchange (ETDEWEB)

Choi, B H; Kim, Y K; Song, T Y [and others

1999-05-01

High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized forindustries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs.

Development of beam utilization/application technology

International Nuclear Information System (INIS)

Choi, B. H.; Kim, Y.K.; Song, T.Y.

1999-05-01

High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized for industries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs

Biomass torrefaction: A promising pretreatment technology for biomass utilization

Science.gov (United States)

Chen, ZhiWen; Wang, Mingfeng; Ren, Yongzhi; Jiang, Enchen; Jiang, Yang; Li, Weizhen

2018-02-01

Torrefaction is an emerging technology also called mild pyrolysis, which has been explored for the pretreatment of biomass to make the biomass more favorable for further utilization. Dry torrefaction (DT) is a pretreatment of biomass in the absence of oxygen under atmospheric pressure and in a temperature range of 200-300 degrees C, while wet torrrefaction (WT) is a method in hydrothermal or hot and high pressure water at the tempertures within 180-260 degrees C. Torrrefied biomass is hydrophobic, with lower moisture contents, increased energy density and higher heating value, which are more comparable to the characteristics of coal. With the improvement in the properties, torrefied biomass mainly has three potential applications: combustion or co-firing, pelletization and gasification. Generally, the torrefaction technology can accelerate the development of biomass utilization technology and finally realize the maximum applications of biomass energy.

Planning and Management of Technology Deployment Center

International Nuclear Information System (INIS)

Park, Jae Won; Joo, Po Kook; Kim, Jun Yeon and others

2005-08-01

The R and D contents are summarized as follows ; Models were set-up for transferring the developed technologies to the industry and managing technology deployment center to vitalize the commercialization and then the set-up model was tried to apply for transferring technologies for commercialization and to define interfaces between the R and D and industrial applications In this project, new products and processes were developed for promoting the commercialization. Infra-structures were firmly set-up for the venture company promotion and technology deployment developed during executing the proton Engineering frontier Project. Commercialization methodology connection with industrial companies were studied by outside specializing institute. Development of gem-stone coloring and new photo catalyst producing techniques are very high value-adding technologies, therefore, experimental and theoretical R and D were transacted simultaneously to obtain the originality of the technology. The theoretical R and D was committed to a specialist outside

Geothermal energy utilization and technology

CERN Document Server

Dickson, Mary H; Fanelli, Mario

2013-01-01

Geothermal energy refers to the heat contained within the Earth that generates geological phenomena on a planetary scale. Today, this term is often associated with man's efforts to tap into this vast energy source. Geothermal Energy: utilization and technology is a detailed reference text, describing the various methods and technologies used to exploit the earth's heat. Beginning with an overview of geothermal energy and the state of the art, leading international experts in the field cover the main applications of geothermal energy, including: electricity generation space and district heating space cooling greenhouse heating aquaculture industrial applications The final third of the book focuses upon environmental impact and economic, financial and legal considerations, providing a comprehensive review of these topics. Each chapter is written by a different author, but to a set style, beginning with aims and objectives and ending with references, self-assessment questions and answers. Case studies are includ...

Energy conversion and utilization technologies

International Nuclear Information System (INIS)

1988-01-01

The DOE Energy Conversion and Utilization Technologies (ECUT) Program continues its efforts to expand the generic knowledge base in emerging technological areas that support energy conservation initiatives by both the DOE end-use sector programs and US private industry. ECUT addresses specific problems associated with the efficiency limits and capabilities to use alternative fuels in energy conversion and end-use. Research is aimed at understanding and improving techniques, processes, and materials that push the thermodynamic efficiency of energy conversion and usage beyond the state of the art. Research programs cover the following areas: combustion, thermal sciences, materials, catalysis and biocatalysis, and tribology. Six sections describe the status of direct contact heat exchange; the ECUT biocatalysis project; a computerized tribology information system; ceramic surface modification; simulation of internal combustion engine processes; and materials-by-design. These six sections have been indexed separately for inclusion on the database. (CK)

The Advanced Technology Environmental Education Center Summer Fellows Institute.

Science.gov (United States)

Depken, Diane E.; Zeman, Catherine L.; Lensch, Ellen Kabat; Brown, Edward J.

2002-01-01

Describes the background, activities, and outcomes of the Advanced Technology Environmental Education Center (ATEEC) and its Summer Fellows Institutes as a model for disciplinary and cross-disciplinary infusion of environmental science and technology content, curriculum, and methods into the classroom. Presents experiences, themes, and activities…

NASA technology utilization applications. [transfer of medical sciences

Science.gov (United States)

1973-01-01

The work is reported from September 1972 through August 1973 by the Technology Applications Group of the Science Communication Division (SCD), formerly the Biological Sciences Communication Project (BSCP) in the Department of Medical and Public Affairs of the George Washington University. The work was supportive of many aspects of the NASA Technology Utilization program but in particular those dealing with Biomedical and Technology Application Teams, Applications Engineering projects, new technology reporting and documentation and transfer activities. Of particular interest are detailed reports on the progress of various hardware projects, and suggestions and criteria for the evaluation of candidate hardware projects. Finally some observations about the future expansion of the TU program are offered.

Launch of patient-centered website is associated with reduced health care utilization: a nationwide natural experiment.

NARCIS (Netherlands)

Spoelman, W.; Bonten, T.; Waal, M. de; Drenthen, T.; Smeele, I.; Nielen, M.; Chavannes, N.

2016-01-01

Background: Health care costs and utilization are rising. High quality patient-centered online information may reduce health care utilization, but evidence of the effect of online health information on health care utilization is scarce. We hypothesized that the release of a nationwide evidence-based

Advertising Technology and Visual Attraction of Cities Centers

Directory of Open Access Journals (Sweden)

Inaam Albazzaz

2017-09-01

Full Text Available Advertising technology represents a component of elements of the visual attraction in the urban scape, made its way transmission process of messages between the ends of the source ofinformation (sender and the Destination information (receiver of the final recipient of themessage, It serves as a social marked and a means of cultural expression, It is part of the inalienable in creating identity and determine the spatial relationships and also is a reflection ofurban culture to the community. This technology has become an increasing feature of the present era, characterized as the era of the three revolutions: (the information revolution, the technologyrevolution, and the media revolution, Where it became an integral part of the visual system surrounding of urban our environment in which we live,, And it worked to change the contemporary urban experience through the attraction and love to stay and stimulating social interactions within a decade and urban spaces that contain the contemporary urban forms, and this is what it will focus the research. The research’s problem is determined by :there is no clear perception about the definition of advertisement technology and its impact on the urban scape of the city centers according the concept of visual attraction. And clarify the goal of research in : Definition advertising technology and determine the most important aspects and indicators according the concept of visual attraction of the city centers. To achieve this goal was adopted the following approach: building a conceptual framework for technology advertising through definition of the basic concepts of research and review the historical development of it within the framework of the urban scape, and then a study of the most important intellectual concepts associated represented by (communication theory and built in investigating this technology (communication channel aims to deliver a message or information from the sender to the receiver

An Analysis of Information Technology Adoption by IRBs of Large Academic Medical Centers in the United States.

Science.gov (United States)

He, Shan; Botkin, Jeffrey R; Hurdle, John F

2015-02-01

The clinical research landscape has changed dramatically in recent years in terms of both volume and complexity. This poses new challenges for Institutional Review Boards' (IRBs) review efficiency and quality, especially at large academic medical centers. This article discusses the technical facets of IRB modernization. We analyzed the information technology used by IRBs in large academic institutions across the United States. We found that large academic medical centers have a high electronic IRB adoption rate; however, the capabilities of electronic IRB systems vary greatly. We discuss potential use-cases of a fully exploited electronic IRB system that promise to streamline the clinical research work flow. The key to that approach utilizes a structured and standardized information model for the IRB application. © The Author(s) 2014.

Development and Testing of the Glenn Research Center Visitor's Center Grid-Tied Photovoltaic Power System

Science.gov (United States)

Eichenberg, Dennis J.

2009-01-01

The NASA Glenn Research Center (GRC) has developed, installed, and tested a 12 kW DC grid-tied photovoltaic (PV) power system at the GRC Visitor s Center. This system utilizes a unique ballast type roof mount for installing the photovoltaic panels on the roof of the Visitor s Center with no alterations or penetrations to the roof. The PV system has generated in excess of 15000 kWh since operation commenced in August 2008. The PV system is providing power to the GRC grid for use by all. Operation of the GRC Visitor s Center PV system has been completely trouble free. A grid-tied PV power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provides valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. Based upon the success of the GRC Visitor s Center PV system, additional PV power system expansion at GRC is under consideration. The GRC Visitor s Center grid-tied PV power system was successfully designed and developed which served to validate the basic principles

The Knowledge-Based Technology Applications Center (KBTAC) seminar series

International Nuclear Information System (INIS)

Isik, C.; Wood, R.M.

1993-12-01

Neural Networks are adaptive systems that allow users to model complex systems, classify patterns, filter data or control processes with little or no a-priori knowledge. Neural networks represent a branch of artificial intelligence technology. Fuzzy logic is a generalization of formalized mathematical logic that allows representation of uncertainty by providing a smooth transition from true to false, instead of a step change. It allows for a proposition to be both true and false, to different degrees at the same time. This allows representation of approximate reasoning concepts that occur frequently in everyday experience, such as ''somewhat true,'' or ''not very hot.'' To utilize these technologies, utility personnel need to acquire knowledge and skills in a number of areas: 1. basic principles of neural networks and fuzzy logic; 2. types of neural networks and fuzzy logic systems, their applications, and requirements for use; 3. considerations for designing neural networks and fuzzy logic systems; 4. software tools available for these technologies. Off-the-shelf software is available for a variety of hardware platforms to rapidly develop, tune and test neural networks and fuzzy logic systems. Familiarity with the problem to which a neural network or fuzzy logic system is applied allows the designer to develop an appropriate design. Therefore, it is desirable to teach neural network and fuzzy logic technology to utility experts in the domain of application

Research and technology: 1994 annual report of the John F. Kennedy Space Center

Science.gov (United States)

1994-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1994 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. The Technology Programs and Commercialization Office (DE-TPO), (407) 867-3017, is responsible for publication of this report and should be contacted for any desired information regarding the advanced technology program.

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

2000-01-31

The Online Measurement of Decontamination project team received a commitment for a demonstration in May from the Sacramento (California) Municipal Utility District (SMUD) Rancho Seco site. Since this site is a member of the DOE Commercial Utilities Consortium, the demonstration will fulfill the DOE and commercial technology demonstration requirements. Discussion on deployment of the Integrated Vertical and Overhead Decontamination (IVOD) System at Rancho Seco was conducted; date for deployment tentatively scheduled for early spring. Based upon fictional requirements from SRS for a shiny monitor in a high-level waste tank, FIU-HCET developed and delivered a draft slurry monitor design and draft test plan. Experiments measuring slurry settling time for SRS slurry simulant at 10 wt% have been completed on FIU-HCET'S flow loop with SRS dip. The completed design package of the test mockup for evaluating Non-Intrusive Location of Buried Items Technologies was sent to Fluor Fernald and the Operating Engineers National Hazmat Program for review. Comments are due at the end of January. Preliminary experiments to determine size distribution of aerosols generated during metal cutting were performed. A 1/4-inch-thick iron plate was cut using a plasma arc torch, and the size distribution of airborne particles was measured using a multistage impactor. Per request of DOE-Ohio, FIU-HCET participated in a weeklong value engineering study for the characterization, decontamination, and dismantlement of their critical path facility.

Workshop on APEC virtual center for environmental technology exchange; APEC kankyo gijutsu koryu virtual center workshop hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

At the 'policy maker workshop of the virtual center of APEC technology exchange' held in November 1997 in Osaka, Japan, it was agreed to organize study groups to discuss the scope of information provided by the virtual center, and to make common the classification systems and retrieval functions. In addition, the necessity was confirmed on international cooperation to promote establishment of virtual centers in different countries and territories. On the first day, Professor Ueda at the Kyoto University gave the basic lecture entitled 'global environment preservation and environmental technology transfer: problems and prospects'. Mr. Dan, the workshop manager gave the basic proposal entitled 'the future directionality of environmental technology exchange inside the APEC territories by using Internet'. Based on the basic proposal made on the first day, reports and discussions were given in the following sessions, where confirmation was made on the future directions. S1: establishment of the virtual centers in other countries and territories; S2: assurance of interchangeability of classification systems and retrieval functions in providing information, and S3: presentation of examples of inter-territorial exchange and the future directionality. (NEDO)

Workshop on APEC virtual center for environmental technology exchange; APEC kankyo gijutsu koryu virtual center workshop hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

At the 'policy maker workshop of the virtual center of APEC technology exchange' held in November 1997 in Osaka, Japan, it was agreed to organize study groups to discuss the scope of information provided by the virtual center, and to make common the classification systems and retrieval functions. In addition, the necessity was confirmed on international cooperation to promote establishment of virtual centers in different countries and territories. On the first day, Professor Ueda at the Kyoto University gave the basic lecture entitled 'global environment preservation and environmental technology transfer: problems and prospects'. Mr. Dan, the workshop manager gave the basic proposal entitled 'the future directionality of environmental technology exchange inside the APEC territories by using Internet'. Based on the basic proposal made on the first day, reports and discussions were given in the following sessions, where confirmation was made on the future directions. S1: establishment of the virtual centers in other countries and territories; S2: assurance of interchangeability of classification systems and retrieval functions in providing information, and S3: presentation of examples of inter-territorial exchange and the future directionality. (NEDO)

Crosscutting Technology Development at the Center for Advanced Separation Technologies

Energy Technology Data Exchange (ETDEWEB)

Christopher Hull

2009-10-31

The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

Human Resource Development and New Technology in the Automobile Industry: A Case Study of Ford Motor Company's Dearborn Engine Plant. The Development and Utilization of Human Resources in the Context of Technological Change and Industrial Restructuring.

Science.gov (United States)

Chen, Kan; And Others

This report centers around a plant-level study of the development and utilization of human resources in the context of technological change and industrial restructuring in the crankshaft production area of Ford Motor Company's Dearborn Engine Plant (DEP). The introductory chapter describes how the study was conducted, provides an introduction to…

Utilizing Internet Technologies in Observatory Control Systems

Science.gov (United States)

Cording, Dean

2002-12-01

The 'Internet boom' of the past few years has spurred the development of a number of technologies to provide services such as secure communications, reliable messaging, information publishing and application distribution for commercial applications. Over the same period, a new generation of computer languages have also developed to provide object oriented design and development, improved reliability, and cross platform compatibility. Whilst the business models of the 'dot.com' era proved to be largely unviable, the technologies that they were based upon have survived and have matured to the point were they can now be utilized to build secure, robust and complete observatory control control systems. This paper will describe how Electro Optic Systems has utilized these technologies in the development of its third generation Robotic Observatory Control System (ROCS). ROCS provides an extremely flexible configuration capability within a control system structure to provide truly autonomous robotic observatory operation including observation scheduling. ROCS was built using Internet technologies such as Java, Java Messaging Service (JMS), Lightweight Directory Access Protocol (LDAP), Secure Sockets Layer (SSL), eXtendible Markup Language (XML), Hypertext Transport Protocol (HTTP) and Java WebStart. ROCS was designed to be capable of controlling all aspects of an observatory and be able to be reconfigured to handle changing equipment configurations or user requirements without the need for an expert computer programmer. ROCS consists of many small components, each designed to perform a specific task, with the configuration of the system specified using a simple meta language. The use of small components facilitates testing and makes it possible to prove that the system is correct.

75 FR 80830 - Proposed Collection; Comment Request; Technology Transfer Center External Customer Satisfaction...

Science.gov (United States)

2010-12-23

... Request; Technology Transfer Center External Customer Satisfaction Survey (NCI) SUMMARY: In compliance...: Technology Transfer Center External Customer Satisfaction Survey (NCI). Type of Information Collection...: Obtain information on the satisfaction of TTC's external customers with TTC customer services; collect...

Factors shaping effective utilization of health information technology in urban safety-net clinics.

Science.gov (United States)

George, Sheba; Garth, Belinda; Fish, Allison; Baker, Richard

2013-09-01

Urban safety-net clinics are considered prime targets for the adoption of health information technology innovations; however, little is known about their utilization in such safety-net settings. Current scholarship provides limited guidance on the implementation of health information technology into safety-net settings as it typically assumes that adopting institutions have sufficient basic resources. This study addresses this gap by exploring the unique challenges urban resource-poor safety-net clinics must consider when adopting and utilizing health information technology. In-depth interviews (N = 15) were used with key stakeholders (clinic chief executive officers, medical directors, nursing directors, chief financial officers, and information technology directors) from staff at four clinics to explore (a) nonhealth information technology-related clinic needs, (b) how health information technology may provide solutions, and (c) perceptions of and experiences with health information technology. Participants identified several challenges, some of which appear amenable to health information technology solutions. Also identified were requirements for effective utilization of health information technology including physical infrastructural improvements, funding for equipment/training, creation of user groups to share health information technology knowledge/experiences, and specially tailored electronic billing guidelines. We found that despite the potential benefit that can be derived from health information technologies, the unplanned and uninformed introduction of these tools into these settings might actually create more problems than are solved. From these data, we were able to identify a set of factors that should be considered when integrating health information technology into the existing workflows of low-resourced urban safety-net clinics in order to maximize their utilization and enhance the quality of health care in such settings.

Applied wind energy research at the National Wind Technology Center

International Nuclear Information System (INIS)

Robinson, M.C.; Tu, P.

1997-01-01

Applied research activities currently being undertaken at the National Wind Technology Center, part of the National Renewable Energy Laboratory, in the United States, are divided into several technical disciplines. An integrated multi-disciplinary approach is urged for the future in order to evaluate advanced turbine designs. The risk associated with any new turbine development program can thus be mitigated through the provision of the advanced technology, analysis tools and innovative designs available at the Center, and wind power can be promoted as a viable renewable energy alternative. (UK)

Guide for monitoring effectiveness of utility Reliability Centered Maintenance (RCM) programs

International Nuclear Information System (INIS)

Midgett, W.D.; Wilson, J.F.; Krochmal, D.F.; Owsenek, L.W.

1991-02-01

Reliability centered maintenance (RCM) programs help utilities optimize preventive maintenance efforts while improving plant safety and economy through increased dependability of plant components. The project team developed this guide and accompanying methodology based on status updates from the Ginna and San Onofre demonstration projects. These updates addressed areas ranging from system selection to the effectiveness of RCM program implementation. In addition, the team incorporated information from a 12-utility survey soliciting opinions on the need for a methodology to monitor RCM cost-effectiveness. An analysis of the 12-utility survey showed that no techniques had been developed to measure RCM program cost-effectiveness. Thus, this guide addresses two key areas: Pros and cons of various monitoring techniques available to assess the overall effectiveness of RCM and a methodology for specifically evaluating the cost-effectiveness of RCM programs. 1 fig

A survey of Vaccine Utilization in a Private Medical Center in Lagos ...

African Journals Online (AJOL)

Safe and effective vaccines have been successful in reducing childhood morbidity and mortality. A study of routine immunization in a private clinic was undertaken to evaluate vaccine utilization. A retrospective evaluation of attendance at a private clinic routine immunization center was done. Quantity of vaccines received ...

Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

Science.gov (United States)

Quick, Jason

2009-01-01

The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the

Appraisal of the Availability and Utilization of New Technological ...

African Journals Online (AJOL)

FIRST LADY

Items 31 - 36 ... instrument was a 36-item questionnaire developed by the researchers. The ... Nigeria utilize new technological resources in science curriculum delivery. ... science instructions makes learning of science concepts clearer to.

St. Luke's Medical Center: technologizing health care

International Nuclear Information System (INIS)

Tumanguil, S.S.

1994-01-01

The computerization of the St. Luke's Medical Center improved the hospital administration and management, particularly in nuclear medicine department. The use of computer-aided X-ray simulator machine and computerized linear accelerator machine in diagnosing and treating cancer are the most recent medical technological breakthroughs that benefited thousands of Filipino cancer patients. 4 photos

Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation

DEFF Research Database (Denmark)

already spent on these technologies also lead to commercial success. The project ‘Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation’ was aiming at starting with the Establishment of such a center. The following report documents the achievements within the project...... of the fluctuating wind energy. As the fuel cell and hydrogen technologies come closer to commercialization, development of testing methodology, qualified testing and demonstration become increasingly important. Danish industrial players have expressed a strong need for support in the process to push fuel cell...... and hydrogen technologies from the research and development stage into the commercial domain. A Center to support industry with test, development, analysis, approval, certification, consultation, and training in the areas of fuel cell and hydrogen technologies was needed. Denmark has demonstrated leading...

SAVANNAH RIVER TECHNOLOGY CENTER MONTHLY REPORT AUGUST 1992

Energy Technology Data Exchange (ETDEWEB)

Ferrell, J.M.

1999-06-21

'This monthly report summarizes Programs and Accomplishments of the Savannah River Technology Center in support of activities at the Savannah River Site. The following categories are addressed: Reactor, Tritium, Separations, Environmental, Waste Management, General, and Items of Interest.'

Ophthalmic patients' utilization of technology and social media: an assessment to improve quality of care.

Science.gov (United States)

Aleo, Chelsea L; Hark, Lisa; Leiby, Benjamin; Dai, Yang; Murchison, Ann P; Martinez, Patricia; Haller, Julia A

2014-10-01

E-health tools have the potential to improve the quality of care for ophthalmic patients, many of whom have chronic conditions. However, little research has assessed ophthalmic patients' use or acceptance of technological devices and social media platforms for health-related purposes. The present study evaluated utilization of technological devices and social media platforms by eye clinic patients, as well as their willingness to receive health reminders through these technologies. A 31-item paper questionnaire was administered to eye clinic patients (n=843) at an urban, tertiary-care center. Questions focused on technology ownership, comfort levels, frequency of use, and preferences for receiving health reminders. Demographic data were also recorded. Eye clinic patients most commonly owned cellular phones (90%), landline phones (81%), and computers (80%). Overall, eye clinic patients preferred to receive health reminders through phone calls and e-mail and used these technologies frequently and with a high level of comfort. Less than 3% of patients preferred using social networking to receive health reminders. In addition, age was significantly associated with technology ownership, comfort level, and frequency of use (ptechnologies more frequently and with a higher comfort level (ptechnologies for appointment reminders, general eye and vision health information, asking urgent medical questions, and requesting prescription refills. Future controlled trials could further explore the efficacy of e-health tools for these purposes.

Energy technologies for distributed utility applications: Cost and performance trends, and implications for photovoltaics

International Nuclear Information System (INIS)

Eyer, J.M.

1994-01-01

Utilities are evaluating several electric generation and storage (G ampersand S) technologies for distributed utility (DU) applications. Attributes of leading DU technologies and implications for photovoltaics (PV) are described. Included is a survey of present and projected cost and performance for: (1) small, advanced combustion turbines (CTs); (2) advanced, natural gas-fired, diesel engines (diesel engines); and (3) advanced lead-acid battery systems (batteries). Technology drivers and relative qualitative benefits are described. A levelized energy cost-based cost target for PV for DU applications is provided. The analysis addresses only relative cost, for PV and for three selected alternative DU technologies. Comparable size, utility, and benefits are assumed, although relative value is application-specific and often technology- and site-specific

SLJ's Technology Survey 2006: New Technologies--Like Blogs and Wikis--Are Taking Their Place in the School Media Center

Science.gov (United States)

Brewer, Sally; Milam, Peggy

2006-01-01

This article presents findings from the School Library Journal's 2006 national technology survey that investigated the trend in today's library media centers. As this study demonstrates, technology continues to be a significant aspect of K-12 media centers. Despite restricted funding and schedules stretched to the limit, media specialists have…

Factors associated with the utilization of primary care emergency centers in a Spanish region with high population dispersion: a mixed-methods study.

Science.gov (United States)

Sanz-Barbero, Belén; Otero-García, Laura; Blasco-Hernández, Teresa; San Sebastián, Miguel

2014-09-03

Adequate access to primary care emergency centers is particularly important in rural areas isolated from urban centers. However, variability in utilization of emergency services located in primary care centers among inhabitants of nearby geographical areas is understudied. The objectives of this study are twofold: 1) to analyze the association between the availability of municipal emergency care centers and utilization of primary care emergency centers (PCEC), in a Spanish region with high population dispersion; and 2) to determine healthcare providers' perceptions regarding PCEC utilization. A mixed-methods study was conducted. Quantitative phase: multilevel logistic regression modeling using merged data from the 2003 Regional Health Survey of Castile and Leon and the 2001 census data (Spain). Qualitative phase:14 in-depth- interviews of rural-based PCEC providers. Having PCEC as the only emergency center in the municipality was directly associated with its utilization (p use. PCEC users were considered to be predominantly workers and students with scheduling conflicts with rural primary care opening hours. The location of emergency care centers is associated with PCEC utilization. Increasing access to primary care by extending hours may be an important step toward optimal PCEC utilization. Further research would determine whether lower PCEC use by certain groups is associated with disparities in access to care.

Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

Science.gov (United States)

1999-01-01

Center Director Roy Bridges stops to pet one of the dogs that serves with Canine Companions for Independence, a vendor displaying its capabilities at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Standing at the right is Carol Cavanaugh, with KSC Public Services; behind Bridges is Nancie Strott (left), a multi-media specialist with Dynacs and chairperson of the Fair, and Sterling Walker (right), director of Engineering Development and chairman of DAAWG. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the other vendors participating are Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

News technology utilization fossil fuel

Directory of Open Access Journals (Sweden)

Blišanová Monika

2004-09-01

Full Text Available Fossil fuel – “alternative energy“ is coal, petroleum, natural gas. Petroleum and natural gas are scarce resources, but they are delimited. Reserves petroleum will be depleted after 39 years and reserves natural gas after 60 years.World reserves coal are good for another 240 years. Coal is the most abundant fossil fuel. It is the least expensive energy source for generating electricity. Many environmental problems associated with use of coal:in coal production, mining creates environmental problems.On Slovakia representative coal only important internal fuel – power of source and coal is produced in 5 locality. Nowadays, oneself invest to new technology on utilization coal. Perspective solution onself shows UCG, IGCC.

International Experience of the Establishing Technology Transfer Centers at the Universities

Directory of Open Access Journals (Sweden)

Lysenko, V.S.

2015-01-01

Full Text Available The analysis of the experience of creation and operation of technology transfer centers on the basis of US universities with the aim of using positive methods for the creation of such centers in Ukraine is presented.

Utilization of sweetpotato based confection technology: A panacea ...

African Journals Online (AJOL)

Utilization of sweet potato-based confectionary was used as a step to reducing food crisis among women farmers in Imo state because of the health benefits, environmental friendliness and ability to make a home food secured with little investments. This is because such technology will help serve as an avenue to reduce ...

Re-Engineering the ISS Payload Operations Control Center During Increased Utilization and Critical Onboard Events

Science.gov (United States)

Dudley, Stephanie R. B.; Marsh, Angela L.

2014-01-01

With an increase in utilization and hours of payload operations being executed onboard the International Space Station (ISS), upgrading the NASA Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) ISS Payload Control Area (PCA) was essential to gaining efficiencies and assurance of current and future payload health and science return. PCA houses the Payload Operations Integration Center (POIC) responsible for the execution of all NASA payloads onboard the ISS. POIC Flight Controllers are responsible for the operation of voice, stowage, command, telemetry, video, power, thermal, and environmental control in support of ISS science experiments. The methodologies and execution of the PCA refurbishment were planned and performed within a four-month period in order to assure uninterrupted operation of ISS payloads and minimal impacts to payload operations teams. To vacate the PCA, three additional HOSC control rooms were reconfigured to handle ISS real-time operations, Backup Control Center (BCC) to Mission Control in Houston, simulations, and testing functions. This involved coordination and cooperation from teams of ISS operations controllers, multiple engineering and design disciplines, management, and construction companies performing an array of activities simultaneously and in sync delivering a final product with no issues that impacted the schedule. For each console operator discipline, studies of Information Technology (IT) tools and equipment layouts, ergonomics, and lines of sight were performed. Infusing some of the latest IT into the project was an essential goal in ensuring future growth and success of the ISS payload science returns. Engineering evaluations led to a state of the art Video Wall implementation and more efficient ethernet cabling distribution providing the latest products and the best solution for the POIC. These engineering innovations led to cost savings for the project. Constraints involved in the management of

VACET: Proposed SciDAC2 Visualization and Analytics Center for Enabling Technologies

International Nuclear Information System (INIS)

Bethel, W; Johnson, C; Hansen, C; Parker, S; Sanderson, A; Silva, C; Tricoche, X; Pascucci, V; Childs, H; Cohen, J; Duchaineau, M; Laney, D; Lindstrom, P; Ahern, S; Meredith, J; Ostrouchov, G; Joy, K; Hamann, B

2006-01-01

This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang',' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies

Technology for the Stars: Extending Our Reach. [Research and Technology: 1995 Annual Report of the Marshall Space Flight Center.

Science.gov (United States)

1996-01-01

Marshall Space Flight Center's (MSFC's) Advanced Studies, Research, Technology, and Technology Transfer projects are summarized in this report. The focus of the report is on the three spotlights at MSFC in 1995: space transportation technology, microgravity research, and technology transfer.

Utility advanced turbine systems (ATS) technology readiness testing

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-15

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

User-centered Technologies For Blind Children

Directory of Open Access Journals (Sweden)

Jaime Sánchez

2008-01-01

Full Text Available The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathematical skills, navigation and orientation, and problem solving of blind children. Findings indicate significant improvements in learning and cognition from using audio-based tools specially tailored for the blind. That is, technologies for blind children, carefully tailored through user-centered design approaches, can make a significant contribution to cognitive development of these children. This paper contributes new insight into the design and implementation of audio-based virtual environments to facilitate learning and cognition in blind children.

The transfer of technologies for biomass energy utilization

International Nuclear Information System (INIS)

Schneiders, H.H.

1995-01-01

The first part of the paper presents the common perception of technology transfer as a trade relationship rather than a systematic approach to establish a complex technological capacity in a given field. It aims to correct this misperception by introducing some other ideas: (a) the need to support the people, adjust the relevant organizations and establish the capacities to provide the products and services; (b) the typical life cycles of technologies from the initial concept to the final stages of transfer and sustainable dissemination; (c) the needs and expectations of the groups targeted by the technologies for biomass energy utilization. The second part of the paper discusses one example of successful technology transfer: the use of large biomass-burning stoves for food preparation in public institutions and private restaurants in East Africa. The third part of the paper highlights two non-technological barriers to the transfer of biomass energy technologies: (a) weak market forces and business interests and a large number of State activities and projects and (b) conflicting interests of end-users, craftsmen, private and public project partners, which can threaten the success of the attempted technology transfer, even after local adaptation. Finally, suggestions are made for overcoming some of these problems. (author)

The transfer of technologies for biomass energy utilization

Energy Technology Data Exchange (ETDEWEB)

Schneiders, H H [German Agency for Technical Cooperation (GTZ), Eschborn (Germany)

1995-12-01

The first part of the paper presents the common perception of technology transfer as a trade relationship rather than a systematic approach to establish a complex technological capacity in a given field. It aims to correct this misperception by introducing some other ideas: (a) the need to support the people, adjust the relevant organizations and establish the capacities to provide the products and services; (b) the typical life cycles of technologies from the initial concept to the final stages of transfer and sustainable dissemination; (c) the needs and expectations of the groups targeted by the technologies for biomass energy utilization. The second part of the paper discusses one example of successful technology transfer: the use of large biomass-burning stoves for food preparation in public institutions and private restaurants in East Africa. The third part of the paper highlights two non-technological barriers to the transfer of biomass energy technologies: (a) weak market forces and business interests and a large number of State activities and projects and (b) conflicting interests of end-users, craftsmen, private and public project partners, which can threaten the success of the attempted technology transfer, even after local adaptation. Finally, suggestions are made for overcoming some of these problems. (author)

76 FR 8371 - Notice Correction; Generic Submission of Technology Transfer Center (TTC) External Customer...

Science.gov (United States)

2011-02-14

... Submission of Technology Transfer Center (TTC) External Customer Satisfaction Surveys (NCI) The Federal... project titled, ``Technology Transfer Center (TTC) External Customer Satisfaction Survey (NCI)'' was... will include multiple customer satisfaction surveys over the course of three years. At this time, only...

Centers for manufacturing technology: Industrial Advisory Committee Review

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

Image Sharing Technologies and Reduction of Imaging Utilization: A Systematic Review and Meta-analysis

Science.gov (United States)

Vest, Joshua R.; Jung, Hye-Young; Ostrovsky, Aaron; Das, Lala Tanmoy; McGinty, Geraldine B.

2016-01-01

Introduction Image sharing technologies may reduce unneeded imaging by improving provider access to imaging information. A systematic review and meta-analysis were conducted to summarize the impact of image sharing technologies on patient imaging utilization. Methods Quantitative evaluations of the effects of PACS, regional image exchange networks, interoperable electronic heath records, tools for importing physical media, and health information exchange systems on utilization were identified through a systematic review of the published and gray English-language literature (2004–2014). Outcomes, standard effect sizes (ESs), settings, technology, populations, and risk of bias were abstracted from each study. The impact of image sharing technologies was summarized with random-effects meta-analysis and meta-regression models. Results A total of 17 articles were included in the review, with a total of 42 different studies. Image sharing technology was associated with a significant decrease in repeat imaging (pooled effect size [ES] = −0.17; 95% confidence interval [CI] = [−0.25, −0.09]; P utilization (pooled ES = 0.20; 95% CI = [0.07, 0.32]; P = .002). For all outcomes combined, image sharing technology was not associated with utilization. Most studies were at risk for bias. Conclusions Image sharing technology was associated with reductions in repeat and unnecessary imaging, in both the overall literature and the most-rigorous studies. Stronger evidence is needed to further explore the role of specific technologies and their potential impact on various modalities, patient populations, and settings. PMID:26614882

CENTER FOR ADVANCED SEPARATION TECHNOLOGY (CAST) PROGRAM

Energy Technology Data Exchange (ETDEWEB)

Yoon, Roe-Hoan; Hull, Christopher

2014-09-30

The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations.

Technology Transfer Center to Assume Patenting and Licensing Responsibilities | Poster

Science.gov (United States)

The NCI Technology Transfer Center (TTC) is undergoing a reorganization that will bring patenting and licensing responsibilities to the Shady Grove and Frederick offices by October 2015. The reorganization is a result of an effort begun in 2014 by NIH to improve the organizational structure of technology transfer at NIH to meet the rapid rate of change within science, technology, and industry, and to better align the science and laboratory goals with the licensing and patenting process.

Factors Relevant to Utility Integration of Intermittent Renewable Technologies

Energy Technology Data Exchange (ETDEWEB)

Wan, Y.; Parsons, B.

1993-08-24

This study assesses factors that utilities must address when they integrate intermittent renewable technologies into their power-supply systems; it also reviews the literature in this area and has a bibliography containing more than 350 listings. Three topics are covered: (1) interface (hardware and design-related interconnection), (2) operability/stability, and (3) planning. This study finds that several commonly held perceptions regarding integration of intermittent renewable energy technologies are not valid. Among fmdings of the study are the following: (1) hardware and system design advances have eliminated most concerns about interface, (2) cost penalties have not occurred at low to moderate penetration levels (and high levels am feasible); and (3) intermittent renewable energy technologies can have capacity values. Obstacles still interfering with intermittent renewable technologies are also indentified.

Factors relevant to utility integration of intermittent renewable technologies

Energy Technology Data Exchange (ETDEWEB)

Wan, Yih-huei; Parsons, B.K.

1993-08-01

This study assesses factors that utilities must address when they integrate intermittent renewable technologies into their power-supply systems; it also reviews the literature in this area and has a bibliography containing more than 350 listings. Three topics are covered: (1) interface (hardware and design-related interconnection), (2) operability/stability, and (3) planning. This study finds that several commonly held perceptions regarding integration of intermittent renewable energy technologies are not valid. Among findings of the study are the following: (1) hardware and system design advances have eliminated most concerns about interface; (2) cost penalties have not occurred at low to moderate penetration levels (and high levels are feasible); and (3) intermittent renewable energy technologies can have capacity values. Obstacles still interfering with intermittent renewable technologies are also identified.

76 FR 2147 - UAW-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW...

Science.gov (United States)

2011-01-12

...-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW-Chrysler Technical Training Center Technology Training Joint Programs Staff, Warren, MI; Notice of Revised... investigation, the Department confirmed that the proportion of Technology Training Joint Programs Staff...

Program strategy document for the nuclear materials. Transportation Technology Center (FY 80)

International Nuclear Information System (INIS)

Jefferson, R.M.

1980-04-01

The TTC's program is divided into four principal areas, Technology and Information Center, Systems Development, Technology, and Institutional Issues. These areas are broken into activities, elements, and subelements which are delineated in this document

CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2005-01-20

The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

Technology roadmap study on carbon capture, utilization and storage in China

International Nuclear Information System (INIS)

Zhang, Xian; Fan, Jing-Li; Wei, Yi-Ming

2013-01-01

Carbon capture, utilization and storage (CCUS) technology will likely become an important approach to reduce carbon dioxide (CO 2 ) emissions and optimize the structure of energy consumption in China in the future. In order to provide guidance and recommendations for CCUS Research, Development and Demonstration in China, a high level stakeholder workshop was held in Chongqing in June 2011 to develop a technology roadmap for the development of CCUS technology. This roadmap outlines the overall vision to provide technically viable and economically affordable technological options to combat climate change and facilitate socio-economic development in China. Based on this vision, milestone goals from 2010 to 2030 are set out in accordance with the technology development environment and current status in China. This study identifies the critical technologies in capture, transport, utilization and storage of CO 2 and proposes technical priorities in the different stages of each technical aspect by evaluating indices such as the objective contribution rate and technical maturity, and gives recommendations on deployment of full-chain CCUS demonstration projects. Policies which would support CCUS are also suggested in this study. - Highlights: • A technology roadmap for CCUS development in China from 2010 to 2030 is presented. • Sound data and analysis in combination with expert workshops are used. • Critical technologies in CCUS are identified. • Priority actions of all stages are identified and proposed. • Guidance and recommendations for CCUS RD and D are provided

Advanced fuel system technology for utilizing broadened property aircraft fuels

Science.gov (United States)

Reck, G. M.

1980-01-01

Possible changes in fuel properties are identified based on current trends and projections. The effect of those changes with respect to the aircraft fuel system are examined and some technological approaches to utilizing those fuels are described.

Industrial coal utilization

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

The effects of the National Energy Act on the use of coal in US industrial and utility power plants are considered. Innovative methods of using coal in an environmentally acceptable way are discussed: furnace types, fluidized-bed combustion, coal-oil-mixtures, coal firing in kilns and combustion of synthetic gas and liquid fuels. Fuel use in various industries is discussed with trends brought about by uncertain availability and price of natural gas and fuel oils: steel, chemical, cement, pulp and paper, glass and bricks. The symposium on Industrial Coal Utilization was sponsored by the US DOE, Pittsburgh Energy Technology Center, April 3 to 4, 1979. Twenty-one papers have been entered individually into the EDB. (LTN)

Data communication standards for power utilities

International Nuclear Information System (INIS)

Nortoft, P.

1992-01-01

In this paper the development of electric utility communication technology during the next decade is addressed. Two main factors are identified: the European Single Market, and the environmental tasks of the nineties. The standardization efforts in Europe are seen as the crank centering this development. some of the standardization efforts reflecting this trend are described

Knowledge and utilization of information communication technology (ICT) among health science students at the University of Gondar, North Western Ethiopia.

Science.gov (United States)

Woreta, Solomon Assefa; Kebede, Yigzaw; Zegeye, Desalegn Tegabu

2013-03-03

Despite the relatively huge ICT investment and policy deployment in higher institutions in Ethiopia, there is still scant information about the success of implementation of the Information Communication Technology (ICT) in the higher education. This study, therefore, was carried out with an aim to assess knowledge and utilization of Information Communication Technology (ICT) among medicine and health science students and its associated factors in Gondar College of Medicine and Health sciences, University of Gondar. A cross-sectional study was conducted at the College of Medicine and Health Sciences, University of Gondar, Ethiopia. Data regarding socio-demographic characteristics of the students, level of knowledge and utilization of ICT were collected by means of a self-administered questionnaire. Data was analyzed using SPSS version 13. A total of 1096 students responded giving a response rate of 97.8%. The mean age of the study participants was 20.3 (±1. 3) years. Females constitute only 26% of the respondents. The majority (79%) were fulltime students. Only half of the respondents (51%) had ICT knowledge and only 46% students utilized ICT while 47% of the respondents never used electronic communication (e.g. email or chat room) and 39% of the respondents never used Microsoft office (e.g. word (®) or WordPerfect (®)). ICT knowledge [AOR = 2.5, 95% CI: 1.7-3.5], family educational background [AOR = 4.36, 95% CI: 2.16-8.80], and perceived quality of training [AOR = 1.9, 95% CI: 1.3-2.8] showed strong and positive associations with ICT utilization. Students from urban areas were more likely to utilize ICT compared with those from rural areas [AOR = 2.7, 95% CI: 2.097, 3.497], and information technology training was found to be positively associated with ICT utilization [AOR = 2. 07, 95% CI: 1.18, 3.62]. The result showed that students' knowledge was inadequate and utilization of ICT was poor. Therefore, the university should sustain professional development to

Knowledge and utilization of information communication technology (ICT) among health science students at the University of Gondar, North Western Ethiopia

Science.gov (United States)

2013-01-01

Background Despite the relatively huge ICT investment and policy deployment in higher institutions in Ethiopia, there is still scant information about the success of implementation of the Information Communication Technology (ICT) in the higher education. This study, therefore, was carried out with an aim to assess knowledge and utilization of Information Communication Technology (ICT) among medicine and health science students and its associated factors in Gondar College of Medicine and Health sciences, University of Gondar. Methods A cross-sectional study was conducted at the College of Medicine and Health Sciences, University of Gondar, Ethiopia. Data regarding socio-demographic characteristics of the students, level of knowledge and utilization of ICT were collected by means of a self-administered questionnaire. Data was analyzed using SPSS version 13. Results A total of 1096 students responded giving a response rate of 97.8%. The mean age of the study participants was 20.3 (±1. 3) years. Females constitute only 26% of the respondents. The majority (79%) were fulltime students. Only half of the respondents (51%) had ICT knowledge and only 46% students utilized ICT while 47% of the respondents never used electronic communication (e.g. email or chat room) and 39% of the respondents never used Microsoft office (e.g. word ® or WordPerfect ®). ICT knowledge [AOR = 2.5, 95% CI: 1.7-3.5], family educational background [AOR = 4.36, 95% CI: 2.16-8.80], and perceived quality of training [AOR = 1.9, 95% CI: 1.3-2.8] showed strong and positive associations with ICT utilization. Students from urban areas were more likely to utilize ICT compared with those from rural areas [AOR = 2.7, 95% CI: 2.097, 3.497], and information technology training was found to be positively associated with ICT utilization [AOR = 2. 07, 95% CI: 1.18, 3.62]. Conclusions The result showed that students’ knowledge was inadequate and utilization of ICT was poor. Therefore, the

Establishment of the Center for Advanced Separation Technologies

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2006-09-30

This Final Technical Report covers the eight sub-projects awarded in the first year and the five projects awarded in the second year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

Utility-Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview

Energy Technology Data Exchange (ETDEWEB)

Mendelsohn, M.; Lowder, T.; Canavan, B.

2012-04-01

Over the last several years, solar energy technologies have been, or are in the process of being, deployed at unprecedented levels. A critical recent development, resulting from the massive scale of projects in progress or recently completed, is having the power sold directly to electric utilities. Such 'utility-scale' systems offer the opportunity to deploy solar technologies far faster than the traditional 'behind-the-meter' projects designed to offset retail load. Moreover, these systems have employed significant economies of scale during construction and operation, attracting financial capital, which in turn can reduce the delivered cost of power. This report is a summary of the current U.S. utility-scale solar state-of-the-market and development pipeline. Utility-scale solar energy systems are generally categorized as one of two basic designs: concentrating solar power (CSP) and photovoltaic (PV). CSP systems can be further delineated into four commercially available technologies: parabolic trough, central receiver (CR), parabolic dish, and linear Fresnel reflector. CSP systems can also be categorized as hybrid, which combine a solar-based system (generally parabolic trough, CR, or linear Fresnel) and a fossil fuel energy system to produce electric power or steam.

76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

Science.gov (United States)

2011-06-17

...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

78 FR 65300 - Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center...

Science.gov (United States)

2013-10-31

... (NOA) for General Purpose Warehouse and Information Technology Center Construction (GPW/IT)--Tracy Site... proposed action to construct a General Purpose Warehouse and Information Technology Center at Defense..., Suite 02G09, Alexandria, VA 22350- 3100. FOR FURTHER INFORMATION CONTACT: Ann Engelberger at (703) 767...

Examination of incentive mechanisms for innovative technologies applicable to utility and nonutility power generators

Energy Technology Data Exchange (ETDEWEB)

McDermott, K.A. [Illinois Commerce Commission, Springfield, IL (United States); Bailey, K.A.; South, D.W. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.

1993-08-01

Innovative technologies, built by either utility or nonutility power generators, have the potential to lower costs with less environmental emissions than conventional technologies. However, the public-good nature of information, along with uncertain costs, performance, and reliability, discourages rapid adoption of these technologies. The effect of regulation of electricity production may also have an adverse impact on motivation to innovate. Slower penetration of cleaner, more efficient technologies could result in greater levels of pollution, higher electricity prices, and a reduction in international competitiveness. Regulatory incentives could encourage adoption and deployment of innovative technologies of all kinds, inducting clean coal technologies. Such incentives must be designed to offset risks inherent in innovative technology and encourage cost-effective behavior. To evaluate innovative and conventional technologies equally, the incremental cost of risk (ICR) of adopting the innovative technology must be determined. Through the ICR, the magnitude of incentive required to make a utility (or nonutility) power generator equally motivated to use either conventional or innovative technologies can be derived. Two technology risks are examined: A construction risk, represented by a 15% cost overrun, and an operating risk, represented by a increased forced outage rate (decreased capacity factor). Different incentive mechanisms and measurement criteria are used to assess the effects of these risks on ratepayers and shareholders. In most cases, a regulatory incentive could offset the perceived risks while encouraging cost-effective behavior by both utility and nonutility power generators. Not only would the required incentive be recouped, but the revenue requirements would be less for the innovative technology; also, less environmental pollution would be generated. In the long term, ratepayers and society would benefit from innovative technologies.

Mobile STEMship Discovery Center: K-12 Aerospace-Based Science, Technology, Engineering, and Mathematics (STEM) Mobile Teaching Vehicle

Science.gov (United States)

2015-08-03

AND SUBTITLE Mobile STEMship Discovery Center: K-12 Aerospace-Based Science, Technology, Engineering, and Mathematics (STEM) Mobile Teaching Vehicle...Center program to be able to expose Science Technology, Engineering and Mathematics (STEM) space-inspired science centers for DC Metro beltway schools

Digital Technologies Supporting Person-Centered Integrated Care - A Perspective.

Science.gov (United States)

Øvretveit, John

2017-09-25

Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning "digitalisation" of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

NASA Johnson Space Center SBIR STTR Program Technology Innovations

Science.gov (United States)

Krishen, Kumar

2007-01-01

The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

Utilization of microbes: modern developments in biological technology

Energy Technology Data Exchange (ETDEWEB)

Praeve, P

1977-01-01

Until recently microbiology had found use only in the foodstuffs sector and in the production of antibiotics; however, the production of biomass should be regarded as the key development of the new science of biotechnology. The biomass consists of fatty and protein-rich microorganisms that can be used for example, in animal feeds. The microorganisms grow not only on cellulose waste and other biological substrates but also, for example, on petroleum and methanol. Their energy demand is comparatively low. It is being realized more and more that inflexible technologies pose problems for our civilization and that biotechnology, which utilizes the cyclic metabolic pathways of microorganisms and often recycles waste materials, shows great promise for the future. Equipment used in the single-cell protein technology is briefly described.

Langley Research Center Utility Risk from Future Climate Change

Science.gov (United States)

De Young, Russell J.; Ganoe, Rene

2015-01-01

The successful operation of NASA Langley Research Center (LaRC) depends on services provided by several public utility companies. These include Newport News Waterworks, Dominion Virginia Power, Virginia Natural Gas and Hampton Roads Sanitation District. LaRC's plan to respond to future climate change should take into account how these companies plan to avoid interruption of services while minimizing cost to the customers. This report summarizes our findings from publicly available documents on how each company plans to respond. This will form the basis for future planning for the Center. Our preliminary findings show that flooding and severe storms could interrupt service from the Waterworks and Sanitation District but the potential is low due to plans in place to address climate change on their system. Virginia Natural Gas supplies energy to produce steam but most current steam comes from the Hampton trash burning plant, thus interruption risk is low. Dominion Virginia Power does not address climate change impacts on their system in their public reports. The potential interruption risk is considered to be medium. The Hampton Roads Sanitation District is projecting a major upgrade of their system to mitigate clean water inflow and infiltration. This will reduce infiltration and avoid overloading the pump stations and treatment plants.

Energy Science and Technology Software Center

Energy Technology Data Exchange (ETDEWEB)

Kidd, E.M.

1995-03-01

The Energy Science and Technology Software Center (ESTSC), is the U.S. Department of Energy`s (DOE) centralized software management facility. It is operated under contract for the DOE Office of Scientific and Technical Information (OSTI) and is located in Oak Ridge, Tennessee. The ESTSC is authorized by DOE and the U.S. Nuclear Regulatory Commission (NRC) to license and distribute DOE-and NRC-sponsored software developed by national laboratories and other facilities and by contractors of DOE and NRC. ESTSC also has selected software from the Nuclear Energy Agency (NEA) of the Organisation for Economic Cooperation and Development (OECD) through a software exchange agreement that DOE has with the agency.

Volpe Center Office of Research and Technology Applications (ORTA) : FY 2013 Annual Report

Science.gov (United States)

2013-12-01

Technology transfer activities performed by the Volpe National Transportation Systems Center during fiscal year 2013 in fulfillment of statutory Office of Research and Technology Applications (ORTA) responsibilities are summarized in this report. Dur...

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING

Energy Technology Data Exchange (ETDEWEB)

Unknown

1999-10-01

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown in Figure 1-1. Information specifically related to 9H production is presented for continuity in H program reporting, but lies outside the ATS program. This report summarizes work accomplished from 4Q98 through 3Q99. The most significant accomplishments are listed.

Role of national centers of research and development in nuclear technology transfer

International Nuclear Information System (INIS)

Graf, J.-J.; Millies, Pierre.

1977-01-01

National Research Centers are shown to play a leading role in nuclear technology transfer, whatever may be the directing scheme of nuclear development in the country envisaged. The first act of the Center consists in training specialists in the various nuclear fields. It must ensure the transfer of technological knowledge towards industry (in metallurgy, mechanics, electronics) and other nuclear auxiliary techniques, together with the transfer towards administration (laws). A simplified scheme of nuclear development strategy based on the French scheme (the French Atomic Energy Commission (CEA) with its subsidiary Companies) is presented that is usable for developing countries [fr

A technology-assessment methodology for electric utility planning: With application to nuclear power plant decommissioning

International Nuclear Information System (INIS)

Lough, W.T.

1987-01-01

Electric utilities and public service commissions have not taken full advantage of the many proven methodologies and techniques available for evaluating complex technological issues. In addition, evaluations performed are deficient in their use of (1) methods for evaluating public attitudes and (2) formal methods of analysis for decision making. These oversight are substantiated through an examination of the literature relevant to electric utility planning. The assessment process known as technology assessment or TA is proposed, and a TA model is developed for route in use in utility planning by electric utilities and state regulatory commissions. Techniques to facilitate public participation and techniques to aid decision making are integral to the proposed model and are described in detail. Criteria are provided for selecting an appropriate technique on a case-by-case basis. The TA model proved to be an effective methodology for evaluating technological issues associated with electric utility planning such as decommissioning nuclear power plants. Through the use of the nominal group technique, the attitudes of a group of residential ratepayers were successfully identified and included in the decision-making process

Improvement and utilization of irradiation capsule technology in HANARO

International Nuclear Information System (INIS)

Choo, Kee-Nam; Cho, Man-Soon; Kim, Bong-Goo; Lee, Cheol-Yong; Yang, Sung-Woo; Shin, Yoon-Taek; Park, Seng-Jae; Jung, Hoan-Sung

2012-01-01

Several improvements of irradiation capsule technology regarding irradiation test parameters, such as temperature and neutron flux/fluence, and regarding instrumentation have progressed at HANARO since the last KAERI-JAERI joint seminar held in 2008. The standard HANARO capsule technology that was developed for use in a commercial power plant temperature of about 300degC was improved to apply to a temperature range of 100-1000degC for the irradiation test of materials of new research reactors and future nuclear systems. Low-flux and long-term irradiation technologies have been developed at HANARO. As a beginning step of the localization of capsule instrumentation technology, the irradiation performance of a domestically produced thermocouple and LVDT will be examined at HANARO. The accuracy of an evaluation of neutron fluence and precise welding technology are also being examined at HANARO. Based on these accumulated capsule technologies, a HANARO irradiation capsule system is being actively utilized for the national R and D programme on commercial nuclear reactors and nuclear fuel cycle technology in Korea. HANARO has recently started the irradiation support of R and D relevant to future nuclear systems including SMART, VHTR, and SFR, and HANARO is preparing new support relevant to new research and Fusion reactors. (author)

Utilization of Information and Communication Technologies as a Predictor of Educational Stress on Secondary School Students

Science.gov (United States)

Eskicumali, Ahmet; Arslan, Serhat; Demirtas, Zeynep

2015-01-01

The purpose of this study is to examine the relationship between utilization of information and communication technologies and educational stress. Participants were 411 secondary school students. Educational Stress Scale and Utilization of Information and Communication Technologies Scale were used as measures. The relationships between students'…

Copper Disk Manufactured at the Space Optics Manufacturing and Technology Center

Science.gov (United States)

2001-01-01

This photograph shows Wes Brown, Marshall Space Flight Center's (MSFC's) lead diamond tuner, an expert in the science of using diamond-tipped tools to cut metal, inspecting the mold's physical characteristics to ensure the uniformity of its more than 6,000 grooves. This king-size copper disk, manufactured at the Space Optics Manufacturing and Technology Center (SOMTC) at MSFC, is a special mold for making high resolution monitor screens. This master mold will be used to make several other molds, each capable of forming hundreds of screens that have a type of lens called a fresnel lens. Weighing much less than conventional optics, fresnel lenses have multiple concentric grooves, each formed to a precise angle, that together create the curvature needed to focus and project images. The MSFC leads NASA's space optics manufacturing technology development as a technology leader for diamond turning. The machine used to manufacture this mold is among many one-of-a-kind pieces of equipment of MSFC's SOMTC.

The Ef fects of Technology Usabilitiy and Individual Technology Readiness on Utilization of Electronic Document Management System (EDMS: A Research on Employee of University Hospital

Directory of Open Access Journals (Sweden)

Asuman Atilla

2015-06-01

Full Text Available Electronic Document Management System (EDMS is software which is utilized for writing, sending and storing, briefly managing the processes and operations of the corporations and institutions. In this empirical research, the statistical differences are investigated between users’ concerns about usability of mentioned technology, users’ technological readiness levels and users’ utilization status of EDMS sample is formed by 189 administrative staff of a university hospital in Ankara. According to findings, significant statistical differences are found between some dimensions of technology usability (usability effectiveness, learnability,helpfulness satisfaction, some dimensions of technology readiness (discomfort and insecurity and the utilization status (user, nonuser of EDMS.

A study on organizational culture, structure and information technology as three KM enablers: A case study in five Iranian medical and healthcare research centers

Directory of Open Access Journals (Sweden)

Mahdi Iran-nejad-parizi

2013-01-01

Full Text Available This study investigates organizational structure, culture, and information technology as knowledge management (KM infrastructural capabilities, and compares their significance and status quo in five medical research centers in Tehran, Iran. Objectives of this research were pursued by employing two statistical methods, regression analysis and Friedman test. Included in the study were 135 people (researchers and support staff from five medical and healthcare research centers of Tehran. A survey questionnaire including 23 questions was utilized to examine organizational structure, culture and information technology indicators. And another 12 questions examined KM effectiveness. The Friedman test indicated that in terms of their status quo, the three studied KM enablers are at different conditions, with organizational culture having the best (mean rank=1.79 and IT the worst (mean rank=2.14 status. Moreover, it was revealed by regression analysis that organizational structure is believed to have the most significant impact (Beta= 0.397 on the effectiveness of knowledge management initiatives, while information technology gained the least perceived impact (Beta= 0.176.

Advanced Acid Gas Separation Technology for the Utilization of Low Rank Coals

Energy Technology Data Exchange (ETDEWEB)

Kloosterman, Jeff

2012-12-31

Air Products has developed a potentially ground-breaking technology – Sour Pressure Swing Adsorption (PSA) – to replace the solvent-based acid gas removal (AGR) systems currently employed to separate sulfur containing species, along with CO{sub 2} and other impurities, from gasifier syngas streams. The Sour PSA technology is based on adsorption processes that utilize pressure swing or temperature swing regeneration methods. Sour PSA technology has already been shown with higher rank coals to provide a significant reduction in the cost of CO{sub 2} capture for power generation, which should translate to a reduction in cost of electricity (COE), compared to baseline CO{sub 2} capture plant design. The objective of this project is to test the performance and capability of the adsorbents in handling tar and other impurities using a gaseous mixture generated from the gasification of lower rank, lignite coal. The results of this testing are used to generate a high-level pilot process design, and to prepare a techno-economic assessment evaluating the applicability of the technology to plants utilizing these coals.

Awareness and pattern of utilizing family planning services among women attending urban health care center Azizabad Sukkur

International Nuclear Information System (INIS)

Shah, N.A.; Nisar, N.

2008-01-01

To assess level of awareness and pattern of utilizing family planning services among women (15-49 years) of reproductive age at Urban Health Center, Azizabad Sukkur, Sindh. A cross-sectional study was conducted from April to June 2005 at Urban Health Care Center Azizabad Sukkur. Two hundred women of reproductive age group were interviewed by using a pre tested semi structured questionnaire visiting the health care center during the study period. Information was obtained after taking informed consent regarding socio demographic characteristics, knowledge, attitude and pattern of utilizing family planning services. The data was entered and analyzed by using statistical package SPSS version 13. About 75% of women and 42.5% husbands were found illiterate, 85% women were housewives, 69.5% were married before 18 years of age and 54% had nuclear family. Regarding desired number of children women responded one child (3%), 2-3 children (11%), 4-5 (37.5%), more than five children (36%), 5.5% said that children are God gifted and 7% did not answer. About 60% of women reported use of at least one contraceptive method and 40% had never used any contraceptive method. The women who received counseling from the health care provider were 48.5% and only 6% received information through media. Religious prohibition, shortage of female staff and cost of family planning contraceptive methods were the main reasons identified for not utilizing contraceptive methods. The unsatisfactory variables were long waiting hours at the center, non-availability of contraceptive, shortage of the female staff and cost. Limited number of women was aware and practice contraception in the area and utilization of family planning services were low. The efforts should be made for providing information to couple and improving quality of family planning services in the area. (author)

Evaluation of the "Angelina Jolie Effect" on Screening Mammography Utilization in an Academic Center.

Science.gov (United States)

Huesch, Marco D; Schetter, Susann; Segel, Joel; Chetlen, Alison

2017-08-01

The aim of this study was to understand the impact on screening mammography at our institution, comparing weekly utilization in the 2 years before and the 2 years after Ms Angelina Jolie disclosed in the New York Times on May 13, 2013, that she had had a prophylactic double mastectomy. All 48,110 consecutive screening mammograms conducted at our institution between May 16, 2011, and May 16, 2015, were selected from our electronic medical record system. We used interrupted time series statistical models and graphical methods on utilization data to understand utilization changes before and after Ms Jolie's news. The graphed trend of weekly screening mammogram utilization failed to show changes around the time of interest. Analytical models and statistical tests also failed to show a step change increase or acceleration of utilization around May 2013. However, graphical and time series analyses showed a flattening of utilization in the middle of 2014. In our well-powered analysis in a large regional breast imaging center, we found no support for the hypothesis that this celebrity news drove increased screening. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Annual report of nuclear technology and education center. April 1, 2002 - March 31, 2003

International Nuclear Information System (INIS)

2003-10-01

This report summarizes the activities of Nuclear Technology and Education Center (NuTEC) in Japan Atomic Energy Research Institute in FY 2002. It includes the domestic educational activities in Tokyo Education Center in Komagome Tokyo for RI and radiation engineers and Tokai Education Center in Tokai for nuclear engineers, and the international training activities for Asia-Pacific region which were planned and administrated by International Technology Transfer Division. The new course so called 'Introductory Course for the Use and the Experiment of Neutron' was started with good appreciation by the participants. All scheduled course plan in Tokyo Education Center and Tokai Education Center was accomplished and the total number of the trainee of both Center was 1,297. The courses for RI and radiation engineers implemented in Tokyo Education Center were closed in this FY and transferred to Tokai Establishment in next FY where the course will be integrated with the ones at Tokai Education Center. The land of Tokyo Education Center will be returned to land-owner by the end of FY 2003 after dismantlement of the facilities. The equipments and instruments used in Tokyo Education Center were transferred to Tokai Education Center after finishing all courses in Tokyo in this FY. The improvement and re-arrangement of the facilities in Tokyo Education Center were proceeded to prepare the courses from Tokyo Education Center. (author)

Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

International Nuclear Information System (INIS)

1980-08-01

A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described

Two Micron Laser Technology Advancements at NASA Langley Research Center

Science.gov (United States)

Singh, Upendra N.

2010-01-01

An Independent Laser Review Panel set up to examine NASA s space-based lidar missions and the technology readiness of lasers appropriate for space-based lidars indicated a critical need for an integrated research and development strategy to move laser transmitter technology from low technical readiness levels to the higher levels required for space missions. Based on the review, a multiyear Laser Risk Reduction Program (LRRP) was initiated by NASA in 2002 to develop technologies that ensure the successful development of the broad range of lidar missions envisioned by NASA. This presentation will provide an overview of the development of pulsed 2-micron solid-state laser technologies at NASA Langley Research Center for enabling space-based measurement of wind and carbon dioxide.

Tiger Team Assessment, Energy Technology Engineering Center

International Nuclear Information System (INIS)

1991-04-01

The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies

Tiger Team Assessment, Energy Technology Engineering Center

Energy Technology Data Exchange (ETDEWEB)

1991-04-01

The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

Utilization of communication technology by patients enrolled in substance abuse treatment.

Science.gov (United States)

McClure, Erin A; Acquavita, Shauna P; Harding, Emily; Stitzer, Maxine L

2013-04-01

Technology-based applications represent a promising method for providing efficacious, widely available interventions to substance abuse treatment patients. However, limited access to communication technology (i.e., mobile phones, computers, internet, and e-mail) could significantly impact the feasibility of these efforts, and little is known regarding technology utilization in substance abusing populations. A survey was conducted to characterize utilization of communication technology in 266 urban, substance abuse treatment patients enrolled at eight drug-free, psychosocial or opioid-replacement therapy clinics. Survey participants averaged 41 years of age and 57% had a yearly household income of less than $15,000. The vast majority reported access to a mobile phone (91%), and to SMS text messaging (79%). Keeping a consistent mobile phone number and yearly mobile contract was higher for White participants, and also for those with higher education, and enrolled in drug-free, psychosocial treatment. Internet, e-mail, and computer use was much lower (39-45%), with younger age, higher education and income predicting greater use. No such differences existed for the use of mobile phones however. Concern regarding the digital divide for marginalized populations appears to be disappearing with respect to mobile phones, but still exists for computer, internet, and e-mail access and use. Results suggest that mobile phone and texting applications may be feasibly applied for use in program-client interactions in substance abuse treatment. Careful consideration should be given to frequent phone number changes, access to technology, and motivation to engage with communication technology for treatment purposes. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Evaluation of Technological Trends and Demands of the Manufacturing Industry to a Center of R&D&I

Directory of Open Access Journals (Sweden)

Leone Peter Correia da Silva Andrade

2015-10-01

Full Text Available The manufacturing industry is fairly representative in the Brazilian economy. The research activities in technology, development and innovation promoted by technology centers are of great importance to boost the competitiveness of this segment. In this context, this work aims presenting the development of the strategic planning for a Center of R&D&I (Research & Development & Innovation, looking 20 years ahead, on a macro level, creating a master plan which summarizes the future focus areas of competence for technology research, development and innovation, coping with manufacturing trends, using a participative workshop approach. Thus, it is expected that this center offer integrated technological solutions with high added value that promote the development and competitiveness of the manufacturing industry, in the prospects for medium and long term. In order to achieve the project objectives taking the principle of strategic planning was followed. On the one hand, focus was placed on the internal perspective analyzing the current status of the Center. On the other hand, the environment of the Center (external perspective was analyzed. Matching the analysis results regarding both perspectives future competence areas were derived, according to global technological trends as well as national and local industrial demand. Thus, the competencies required to be developed by a technology center to meet the manufacturing industry over the next twenty years would be derived.

Human Centered Hardware Modeling and Collaboration

Science.gov (United States)

Stambolian Damon; Lawrence, Brad; Stelges, Katrine; Henderson, Gena

2013-01-01

In order to collaborate engineering designs among NASA Centers and customers, to in clude hardware and human activities from multiple remote locations, live human-centered modeling and collaboration across several sites has been successfully facilitated by Kennedy Space Center. The focus of this paper includes innovative a pproaches to engineering design analyses and training, along with research being conducted to apply new technologies for tracking, immersing, and evaluating humans as well as rocket, vehic le, component, or faci lity hardware utilizing high resolution cameras, motion tracking, ergonomic analysis, biomedical monitoring, wor k instruction integration, head-mounted displays, and other innovative human-system integration modeling, simulation, and collaboration applications.

Present status and future plans of the National Atomic Research Center of Malaysia

International Nuclear Information System (INIS)

Rashid, N.K.

1980-01-01

The Malaysian Atomic Research Center (PUSPATI) was established in 1972 and operates under the Ministry of Science, Technology and the Environment. It is the first research center of this kind in Malaysia. Some of the objectives of this center are: operation and maintenance of the research reactor; research and development in reactor science and technology; production of short-lived radioisotopes for use in medicine, agriculture and industry; coordination of the utilization of the reactor and its experimental facilities among the various research institutes and universities; training in nuclear radiation field; personnel monitoring and environmental surveillance

Utilizing technological innovations to enhance psychotherapy supervision, training, and outcomes.

Science.gov (United States)

Barnett, Jeffrey E

2011-06-01

Recent technological advances in the use of the Internet and video technologies has greatly impacted the provision of psychotherapy and other clinical services as well as how the training of psychotherapists may be conducted. When utilized appropriately these technologies may provide greater access to needed services to include treatment, consultation, supervision, and training. Specific ethical challenges and pitfalls are discussed and recommendations are made for the ethical use of these technologies. Additionally, innovative practices from the seven articles in the special section that follows are highlighted and reviewed. These articles present a number of innovations that can take psychotherapy training, research, supervision, and treatment forward toward increased effectiveness. Recommendations for integrating these innovations into ongoing practices are provided and for additional research to build on the important work of the authors in this special section are provided.

Current status of utilization of radioisotopes and radiation technology in Malaysia

International Nuclear Information System (INIS)

Ahmad Tajuddin Ali

1985-01-01

The utilization of isotope and radiation technology in Malaysia dates back to the early sixties. However it was confined to the field of medicine. Today, the use of this technology has widen up, covering the agricultural and industrial areas. The increasing use of the technology has prompted the government to establish the Nuclear Energy Unit whose one of its main functions is to ensure the safe application of radioisotopes and radiations. For this purpose, facilities for training, calibration, waste treatment, etc. were provided by this unit to cater the need of radioisotope and radiation users throughout the country. (author)

Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

Energy Technology Data Exchange (ETDEWEB)

Davidson, Ronald C.

1980-08-01

A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

Effects of a pain education program in Complementary and Alternative Medicine treatment utilization at a VA medical center.

Science.gov (United States)

Cosio, David; Lin, Erica H

2015-06-01

Past studies have shown that U.S. Veterans are consumers of CAM. However, more than 75% of Veteran non-users report they would utilize these treatment options if made available. Thus, Veterans may not be fully aware of the CAM options currently available to them in the current U.S. VA health care system. The current study tested the hypothesis that Veterans would report an increase in CAM utilization after completing a formal pain education program in a VA medical center. The study used a quasi-experimental, one-group, pre/post-test design. Midwestern, U.S. VA Medical Center. The responses from 103 Veterans who elected to participate in the program and the assessment measures were included in the outcome analyses. "Pain Education School" is a 12-week, educational program that is open to all Veterans and their families. It is a comprehensive program that introduces patients to 23 different disciplines at the VA Medical Center that deal with chronic, non-cancer pain. An adaptation of the Complementary and Alternative Medicine Questionnaire(©), SECTION A: Use of Alternative Health Care Providers. There was a significant difference found in overall utilization of CAM after completing the pain education program. The most utilized CAM modality was the chiropractor; the least utilized were hypnosis and aromatherapy. Not all health care systems or providers may have access to an education-focused, professionally driven program as an amenity. However, lessons can be learned from this study in terms of what pain providers may be able to accomplish in their practice. Published by Elsevier Ltd.

User-Centered Design and Interactive Health Technologies for Patients

Science.gov (United States)

De Vito Dabbs, Annette; Myers, Brad A.; Mc Curry, Kenneth R.; Dunbar-Jacob, Jacqueline; Hawkins, Robert P.; Begey, Alex; Dew, Mary Amanda

2010-01-01

Despite recommendations that patients be involved in the design and testing of health technologies, few reports describe how to involve patients in systematic and meaningful ways to ensure that applications are customized to meet their needs. User-centered design (UCD) is an approach that involves end-users throughout the development process so that technology support tasks, are easy to operate, and are of value to users. In this paper we provide an overview of UCD and use the development of Pocket Personal Assistant for Tracking Health (Pocket PATH), to illustrate how these principles and techniques were applied to involve patients in the development of this interactive health technology. Involving patient-users in the design and testing ensured functionality and usability, therefore increasing the likelihood of promoting the intended health outcomes. PMID:19411947

A future perspective on technological obsolescenceat NASA, Langley Research Center

Science.gov (United States)

Mcintyre, Robert M.

1990-01-01

The present research effort was the first phase of a study to forecast whether technological obsolescence will be a problem for the engineers, scientists, and technicians at NASA Langley Research Center (LaRC). There were four goals of the research: to review the literature on technological obsolescence; to determine through interviews of division chiefs and branch heads Langley's perspective on future technological obsolescence; to begin making contacts with outside industries to find out how they view the possibility of technological obsolescence; and to make preliminary recommendations for dealing with the problem. A complete description of the findings of this research can be reviewed in a technical report in preparation. The following are a small subset of the key findings of the study: NASA's centers and divisions vary in their missions and because of this, in their capability to control obsolescence; research-oriented organizations within NASA are believed by respondents to keep up to date more than the project-oriented organizations; asked what are the signs of a professional's technological obsolescence, respondents had a variety of responses; top performing scientists were viewed as continuous learners, keeping up to date by a variety of means; when asked what incentives were available to aerospace technologists for keeping up to data, respondents specified a number of ideas; respondents identified many obstacles to professionals' keeping up to date in the future; and most respondents expressed some concern for the future of the professionals at NASA vis a vis the issue of professional obsolescence.

Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

Science.gov (United States)

O'Neil, Dara

2002-01-01

Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

Utilizing TOPSIS intensified with adjustment similarity factor to determine price of technology

Directory of Open Access Journals (Sweden)

Seyed Mohammad Seyedhosseini

2012-08-01

Full Text Available Technology transfer has been a very frequent activity in the industrial world nowadays. Technology valuation, and in particular technology pricing, has played a considerable role in these transactions, in spite of a huge amount of limitations in the pricing methodologies applied. Making a sound, traceable and reliable means for applying the price evaluation procedure, seems as a technological requirement to be traced for. The objective of delivering this paper is to introduce a new numerical technology pricing method to provide the two transacting parties a unique compromised price. A three-dimensional model for technology pricing is proposed and The TOPSPS algorithm has been utilized to select the most similar technologies to the intended one and the constructed scoring system is applied to calculate the final technology price accordingly.

Overview of Stirling Technology Research at NASA Glenn Research Center

Science.gov (United States)

Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

2016-01-01

Stirling Radioisotope Power Systems (RPSs) are under development to provide power on future space science missions where robotic spacecraft will orbit, fly by, land, or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. NASA Glenn Research Center's newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability and system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

NASA Centers and Universities Collaborate Through Smallsat Technology Partnerships

Science.gov (United States)

Cockrell, James

2018-01-01

The Small Spacecraft Technology (SST) Program within the NASA Space Technology Mission Directorate is chartered develop and demonstrate the capabilities that enable small spacecraft to achieve science and exploration missions in "unique" and "more affordable" ways. Specifically, the SST program seeks to enable new mission architectures through the use of small spacecraft, to expand the reach of small spacecraft to new destinations, and to make possible the augmentation existing assets and future missions with supporting small spacecraft. The SST program sponsors smallsat technology development partnerships between universities and NASA Centers in order to engage the unique talents and fresh perspectives of the university community and to share NASA experience and expertise in relevant university projects to develop new technologies and capabilities for small spacecraft. These partnerships also engage NASA personnel in the rapid, agile and cost-conscious small spacecraft approaches that have evolved in the university community, as well as increase support to university efforts and foster a new generation of innovators for NASA and the nation.

NDE training activities at the EPRI NDE Center

International Nuclear Information System (INIS)

Pherigo, G.L.

1988-01-01

The three principal categories of training activity at the EPRI NDE Center are in-service inspection (ISI) training, technical skills training, and human resource development. The ISI training category, which addresses recently developed NDE technologies that are ready for field application, is divided into two areas. One area provides ongoing training and qualification service to boiling water reactor (BWR) utilities in accordance with the Coordination Plan for NRC/EPRI/BWROG Training and Qualification Activities of NDE Personnel. This plan specifically addresses the detection and sizing of intergranular stress corrosion cracking (IGSCC). The second area includes training activities for other recently developed NDE technologies. Courses in this area include weld overlay examination and advanced eddy current data analysis. The technical skills training is developed and offered to support the basic NDE technology needs of the utilities, with emphasis on utility applications. These programs are provided in direct response to generic or specific needs identified by the utility NDE community. The human resource development activities are focused on long-term utility needs through awareness programs for high schools, technical schools, and universities. These training programs are described

Utilizing Technology to Encourage Healthy Lifestyles

Directory of Open Access Journals (Sweden)

Cynthia Shuster

2013-06-01

Full Text Available In our fast paced world, using technology allows us to connect with people and assist them in developing healthier lifestyles within their time limits due to families, work, and other responsibilities. The goal of our project was the development of online, technology-based, nutrition, health, and fitness education challenges using social media as a means of helping consumers develop healthy lifestyle changes. Participants completed preassessments and postassessments to determine overall program impact and to self-report perceptions of knowledge gained and practice/behavior change. Results from the challenges indicated participants gained knowledge on nutrition, health and fitness topics while making strides towards lifestyle changes and adoption of healthy habits. Results revealed healthier eating habits were developed and physical activity was increased with many participants losing weight. Ease of participating was the most reported reason for participating in the challenges. To determine “best practice,” varying lengths of time for the challenges from four, seven, and thirteen weeks allowed the educators to derive implications for future programming, including branding, length of the challenge, frequency, and participant behavior change. To remain relevant and reach a greater diversity of populations, educators need to continue to explore and utilize various social media tools.

Global orbit feedback utilizing analog and digital technologies

International Nuclear Information System (INIS)

Singh, O.; Tang, Y.; Ramamoorthy, S.; Krinsky, S.; Yu, L.H.

1997-01-01

At the NSLS, an analog global orbit feedback system is used in regular operations, and a digital global orbit feedback system is available in machine physics studies on the X-Ray Ring. Here, the authors discuss the relative merits of utilizing analog and digital technology in orbit feedback. Results of experiments are reported characterizing the performance of the analog and digital systems when operated individually or together. They give their thoughts on plans for future development of the orbit feedback systems at the NSLS

New Cryogenic Optical Test Capability at Marshall Space Flight Center's Space Optics Manufacturing Technology Center

Science.gov (United States)

Kegley, Jeff; Burdine, Robert V. (Technical Monitor)

2002-01-01

A new cryogenic optical testing capability exists at Marshall Space Flight Center's Space Optics Manufacturing Technology Center (SOMTC). SOMTC has been performing optical wavefront testing at cryogenic temperatures since 1999 in the X-ray Cryogenic Test Facility's (XRCF's) large vacuum chamber. Recently the cryogenic optical testing capability has been extended to a smaller vacuum chamber. This smaller horizontal cylindrical vacuum chamber has been outfitted with a helium-cooled liner that can be connected to the facility's helium refrigeration system bringing the existing kilowatt of refrigeration capacity to bear on a 1 meter diameter x 2 meter long test envelope. Cryogenic environments to less than 20 Kelvin are now possible in only a few hours. SOMTC's existing instruments (the Instantaneous Phase-shifting Interferometer (IPI) from ADE Phase-Shift Technologies and the PhaseCam from 4D Vision Technologies) view the optic under test through a 150 mm clear aperture BK-7 window. Since activation and chamber characterization tests in September 2001, the new chamber has been used to perform a cryogenic (less than 30 Kelvin) optical test of a 22.5 cm diameter x 127 cm radius of curvature Si02 mirror, a cryogenic survival (less than 30 Kelvin) test of an adhesive, and a cryogenic cycle (less than 20 Kelvin) test of a ULE mirror. A vibration survey has also been performed on the test chamber. Chamber specifications and performance data, vibration environment data, and limited test results will be presented.

How You Can Partner with NIH | NCI Technology Transfer Center | TTC

Science.gov (United States)

NCI Technology Transfer Center (TTC) provides an array of agreements to support the National Cancer Institute's partnering. Deciding which type of agreement to use can be a challenge: CRADA, MTA, collaboration, agreement, CTA, Materials-CRADA

Career and Technology Center Honors Julie Hartman | Poster

Science.gov (United States)

By Carolynne Keenan, Contributing Writer On May 7, Julie Hartman was honored by the Frederick County Career and Technology Center (CTC) for her support of the CTC’s Biomedical Sciences Program. As an education program specialist for Outreach and Special Programs at NCI at Frederick, Hartman is responsible for NCI at Frederick’s participation in the program, which is designed to offer Frederick County high school students hands-on, practical laboratory experience beyond the typical classroom setting. 

ESTABLISHMENT OF THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Hugh W. Rimmer

2003-07-01

Technical Progress Report describes progress made on the eight sub-projects awarded in the first year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of activity only.

Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

Volpe Center Office of Research and Technology Applications (ORTA) : fiscal year 2014 annual report

Science.gov (United States)

2014-12-01

Technology transfer activities performed by the Volpe National Transportation Systems Center during fiscal year 2014 in fulfillment of statutory Office of Research and Technology Applications (ORTA) responsibilities are summarized in this report.

PACS strategy for imaging centers.

Science.gov (United States)

Bedel, Victoria; Zdanowicz, Mark

2004-01-01

Picture archiving and communications systems (PACS) have been available in imaging centers for many years, but they often were less functional, were not well integrated into patient information systems, and lacked the network backbone to implement a system. As modalities are replaced and technology improves, the ability and time for an imaging center to acquire, integrate, and utilize PACS has arrived. However, each imaging center must determine why it should invest in PACS. A business plan is the fundamental need. Each imaging center must understand its target market, growth rate, and staffing plans. Additional considerations lie in current and future modality availability, the need for offsite delivery of images and reports, and the potential need for remote transmission of images. These issues must be identified and prioritized. A multidisciplinary team is essential. The most successful PACS implementation begins with complete involvement from all levels. The team should be comprised of people with complementary skills who are committed to a common purpose, set of performance goals, and approach for which they hold themselves mutually accountable. The team must jointly decide on the project's objectives. These objectives fall under 4 categories: clinical, service, financial, and performance. PACS must be considered a tool to help accomplish each objective. The imaging center must determine its top priorities, then translate them into a technology "wish list." The center can then list those pieces of technology that are most important and prioritize them. There are even more considerations for connecting multiple imaging centers. The team must create a comprehensive request for proposal (RFP) and determine the vendors that will receive the document. Once the RFP responses have been received and the vendor has been selected, an effective training plan must be executed. Training plans should be competency-based, ensuring comfort and competency among all staff. Upon

Digital Technologies Supporting Person-Centered Integrated Care – A Perspective

Directory of Open Access Journals (Sweden)

John Øvretveit

2017-09-01

Full Text Available Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning “digitalisation” of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

Digital Technologies Supporting Person-Centered Integrated Care – A Perspective

Science.gov (United States)

2017-01-01

Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning “digitalisation” of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care. PMID:29588629

Patient safety goals for the proposed Federal Health Information Technology Safety Center.

Science.gov (United States)

Sittig, Dean F; Classen, David C; Singh, Hardeep

2015-03-01

The Office of the National Coordinator for Health Information Technology is expected to oversee creation of a Health Information Technology (HIT) Safety Center. While its functions are still being defined, the center is envisioned as a public-private entity focusing on promotion of HIT related patient safety. We propose that the HIT Safety Center leverages its unique position to work with key administrative and policy stakeholders, healthcare organizations (HCOs), and HIT vendors to achieve four goals: (1) facilitate creation of a nationwide 'post-marketing' surveillance system to monitor HIT related safety events; (2) develop methods and governance structures to support investigation of major HIT related safety events; (3) create the infrastructure and methods needed to carry out random assessments of HIT related safety in complex HCOs; and (4) advocate for HIT safety with government and private entities. The convening ability of a federally supported HIT Safety Center could be critically important to our transformation to a safe and effective HIT enabled healthcare system. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

IAEA and International Science and Technology Center sign cooperative agreement

International Nuclear Information System (INIS)

2008-01-01

Full text: The IAEA and the International Science and Technology Center (ISTC) today signed an agreement that calls for an increase in cooperation between the two organizations. The memorandum of understanding seeks to amplify their collaboration in the research and development of applications and technology that could contribute to the IAEA's activities in the fields of verification and nuclear security, including training and capacity building. IAEA Safeguards Director of Technical Support Nikolay Khlebnikov and ISTC Executive Director Adriaan van der Meer signed the Agreement at IAEA headquarters in Vienna on 22 October 2008. (IAEA)

Personalized Integrated Educational System: Technology Functions for the Learner- Centered Paradigm of Education

Science.gov (United States)

Reigeluth, Charles M.; Aslan, Sinem; Chen, Zengguan; Dutta, Pratima; Huh, Yeol; Lee, Dabae; Lin, Chun-Yi; Lu, Ya-Huei; Min, Mina; Tan, Verily; Watson, Sunnie Lee; Watson, William R.

2015-01-01

The learner-centered paradigm of instruction differs in such fundamental ways from the teacher-centered paradigm that it requires technology to serve very different functions. In 2006, a research team at Indiana University began to work on identifying those functions and published their results in 2008. Subsequently, the team elaborated and…

Perception of medical students for utility of mobile technology use in medical education

OpenAIRE

Sushama Subhash Thakre; Subhash Bapurao Thakre

2015-01-01

Introduction: Mobile technology is changing the way we live, and it is beginning to change the way we learn. Current literature reviews have shown that research on mobile technology in medical education primarily focused on efficacy, of mobile devices as an educational tool and resource, infrastructure to support m-learning, benefits, challenges, and appropriate use. Objectives: To assess the perception of medical student for the utility of mobile technology in their learning experience and t...

Accelerated Adoption of Advanced Health Information Technology in Beacon Community Health Centers.

Science.gov (United States)

Jones, Emily; Wittie, Michael

2015-01-01

To complement national and state-level HITECH Act programs, 17 Beacon communities were funded to fuel community-wide use of health information technology to improve quality. Health centers in Beacon communities received supplemental funding. This article explores the association between participation in the Beacon program and the adoption of electronic health records. Using the 2010-2012 Uniform Data System, trends in health information technology adoption among health centers located within and outside of Beacon communities were explored using differences in mean t tests and multivariate logistic regression. Electronic health record adoption was widespread and rapidly growing in all health centers, especially quality improvement functionalities: structured data capture, order and results management, and clinical decision support. Adoption lagged for functionalities supporting patient engagement, performance measurement, care coordination, and public health. The use of advanced functionalities such as care coordination grew faster in Beacon health centers, and Beacon health centers had 1.7 times higher odds of adopting health records with basic safety and quality functionalities in 2010-2012. Three factors likely underlie these findings: technical assistance, community-wide activation supporting health information exchange, and the layering of financial incentives. Additional technical assistance and community-wide activation is needed to support the use of functionalities that are currently lagging. © Copyright 2015 by the American Board of Family Medicine.

Are health centers in Thailand ready for health information technology? : a national survey.

Science.gov (United States)

Kijsanayotin, Boonchai; Speedie, Stuart

2006-01-01

The Thailand universal health care coverage scheme was instituted in 2001 and The Thailand Ministry of Public Health (MOPH) is restructuring its information systems to support this reform. The MOPH anticipates developing computerized health information systems which can provide information for administration tasks and can improve both healthcare delivery and public health services. To achieve these target goals, knowledge about users and organizations is vital. The knowledge of how health center workers currently use information technology (IT), their knowledge of IT, and acceptance of IT are not only beneficial to policy makers but also to system designers and implementers. The primary objective of this study is to learn how health centers in Thailand use IT, the level of basic IT knowledge among their workers, and their acceptance of health IT. We surveyed a random cross sectional sample of 1,607 health centers representing the total of 9,806 in Thailand in 2005. With an 82% response rate, the preliminary results indicate that information technology usage is pervasive in health centers. The respondents showed a moderately high degree of health information technology acceptance with a modest level of basic IT knowledge. There were no differences in degrees of acceptance among the four geographic regions. The mean score of "intention to use IT" was 5.6 on a scale of 7 and the average basic IT knowledge score was 13 out of 20. These results suggests the possibility of project success if the national health center information system projects are developed and implemented.

Scientific Data Management Center for Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Vouk, Mladen A.

2013-01-15

Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Fortunately, the data management problems encountered by most scientific domains are common enough to be addressed through shared technology solutions. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation, analysis, or visualization engine. These processes are complicated by the fact that scientific data are structured differently for specific application domains, and are stored in specialized file formats. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Specialized feature discovery and statistical analysis techniques are needed before the data can be understood or visualized. Furthermore, interactive analysis requires techniques for efficiently selecting subsets of the data. Finally, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration. The SDM center was established under the SciDAC program to address these issues. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced

Recent advances in Ni-H2 technology at NASA Lewis Research Center

Science.gov (United States)

Gonzalezsanabria, O. D.; Britton, D. L.; Smithrick, J. J.; Reid, M. A.

1986-01-01

The NASA Lewis Research Center has concentrated its efforts on advancing the Ni-H2 system technology for low Earth orbit applications. Component technology as well as the design principles were studied in an effort to understand the system behavior and failure mechanisms in order to increase performance and extend cycle life. The design principles were previously addressed. The component development is discussed, in particular the separator and nickel electrode and how these efforts will advance the Ni-H2 system technology.

Trading Places: When Teachers Utilize Student Expertise in Technology-Intensive Classrooms.

Science.gov (United States)

Ringstaff, Cathy; And Others

Utilizing self-report data from 32 elementary and secondary teachers, this longitudinal, qualitative study examines the role shifts of both teachers and students as they adapted to teaching and learning in educational, technology-rich, Apple Classrooms of Tomorrow environments. At first, teachers in these instructionally innovative classrooms…

Molecular diagnostics clinical utility strategy: a six-part framework.

Science.gov (United States)

Frueh, Felix W; Quinn, Bruce

2014-09-01

The clinical utility of a molecular test rises proportional to a favorable regulatory risk/benefit assessment, and clinical utility is the driver of payer coverage decisions. Although a great deal has been written about clinical utility, debates still center on its 'definition.' We argue that the definition (an impact on clinical outcomes) is self-evident, and improved communications should focus on sequential steps in building and proving an adequate level of confidence for the diagnostic test's clinical value proposition. We propose a six-part framework to facilitate communications between test developers and health technology evaluators, relevant to both regulatory and payer decisions.

The role of exergy in increasing utilization of green energy and technologies. Paper no. IGEC-1-Keynote-Rosen

International Nuclear Information System (INIS)

Rosen, M.A.

2005-01-01

The use of exergy is described as a measure for identifying and explaining the benefits of green energy and technologies, so the benefits can be clearly understood and appreciated by experts and non-experts alike, and the utilization of green energy and technologies can be increased. Exergy can be used to assess and improve energy systems, and can help better understand the benefits of utilizing green energy by providing more useful and meaningful information than energy provides. Exergy clearly identifies efficiency improvements and reductions in thermodynamic losses attributable to green technologies. Exergy can also identify better than energy the environmental benefits and economics of energy technologies. Exergy should be utilized to engineers and scientists, as well as decision and policy makers, involved in green energy and technologies. (author)

Final Report for 'Center for Technology for Advanced Scientific Component Software'

International Nuclear Information System (INIS)

Shasharina, Svetlana

2010-01-01

The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

Utilization of information technology in eastern North Carolina physician practices: determining the existence of a digital divide.

Science.gov (United States)

Rosenthal, David A; Layman, Elizabeth J

2008-02-13

The United States Department of Health and Human Services (DHHS) has emphasized the importance of utilizing health information technologies, thus making the availability of electronic resources critical for physicians across the country. However, few empirical assessments exist regarding the current status of computerization and utilization of electronic resources in physician offices and physicians' perceptions of the advantages and disadvantages of computerization. Through a survey of physicians' utilization and perceptions of health information technology, this study found that a "digital divide" existed for eastern North Carolina physicians in smaller physician practices. The physicians in smaller practices were less likely to utilize or be interested in utilizing electronic health records, word processing applications, and the Internet.

Breast Imaging Utilizing Dedicated Gamma Camera and (99m)Tc-MIBI: Experience at the Tel Aviv Medical Center and Review of the Literature Breast Imaging.

Science.gov (United States)

Even-Sapir, Einat; Golan, Orit; Menes, Tehillah; Weinstein, Yuliana; Lerman, Hedva

2016-07-01

The scope of the current article is the clinical role of gamma cameras dedicated for breast imaging and (99m)Tc-MIBI tumor-seeking tracer, as both a screening modality among a healthy population and as a diagnostic modality in patients with breast cancer. Such cameras are now commercially available. The technology utilizing a camera composed of a NaI (Tl) detector is termed breast-specific gamma imaging. The technology of dual-headed camera composed of semiconductor cadmium zinc telluride detectors that directly converts gamma-ray energy into electronic signals is termed molecular breast imaging. Molecular breast imaging system has been installed at the Department of Nuclear medicine at the Tel Aviv Sourasky Medical Center, Tel Aviv in 2009. The article reviews the literature well as our own experience. Copyright © 2016 Elsevier Inc. All rights reserved.

Voice Over Internet Protocol (VoIP) in a Control Center Environment

Science.gov (United States)

Pirani, Joseph; Calvelage, Steven

2010-01-01

The technology of transmitting voice over data networks has been available for over 10 years. Mass market VoIP services for consumers to make and receive standard telephone calls over broadband Internet networks have grown in the last 5 years. While operational costs are less with VoIP implementations as opposed to time division multiplexing (TDM) based voice switches, is it still advantageous to convert a mission control center s voice system to this newer technology? Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) has converted its mission voice services to a commercial product that utilizes VoIP technology. Results from this testing, design, and installation have shown unique considerations that must be addressed before user operations. There are many factors to consider for a control center voice design. Technology advantages and disadvantages were investigated as they refer to cost. There were integration concerns which could lead to complex failure scenarios but simpler integration for the mission infrastructure. MSFC HOSC will benefit from this voice conversion with less product replacement cost, less operations cost and a more integrated mission services environment.

Clinical utility of RapidArc™ radiotherapy technology

International Nuclear Information System (INIS)

Infusino, Erminia

2015-01-01

RapidArc™ is a radiation technique that delivers highly conformal dose distributions through the complete rotation (360°) and speed variation of the linear accelerator gantry. This technique, called volumetric modulated arc therapy (VMAT), compared with conventional radiotherapy techniques, can achieve high-target volume coverage and sparing damage to normal tissues. RapidArc delivers precise dose distribution and conformity similar to or greater than intensity-modulated radiation therapy in a short time, generally a few minutes, to which image-guided radiation therapy is added. RapidArc has become a currently used technology in many centers, which use RapidArc technology to treat a large number of patients. Large and small hospitals use it to treat the most challenging cases, but more and more frequently for the most common cancers. The clinical use of RapidArc and VMAT technology is constantly growing. At present, a limited number of clinical data are published, mostly concerning planning and feasibility studies. Clinical outcome data are increasing for a few tumor sites, even if only a little. The purpose of this work is to discuss the current status of VMAT techniques in clinical use through a review of the published data of planning systems and clinical outcomes in several tumor sites. The study consisted of a systematic review based on analysis of manuscripts retrieved from the PubMed, BioMed Central, and Scopus databases by searching for the keywords “RapidArc”, “Volumetric modulated arc radiotherapy”, and “Intensity-modulated radiotherapy”

Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report

International Nuclear Information System (INIS)

Herbst, A.K.; McCray, J.A.; Rogers, A.Z.; Simmons, R.F.; Palethrope, S.J.

1999-01-01

The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels

An overview of the NDE Center - The first decade

International Nuclear Information System (INIS)

Dau, G.J.

1990-01-01

The EPRI NDE Center was established in 1979 to provide the electrical utility industry with a dedicated NDE capability. The Center's role was defined as providing a bridge to transfer the research and development results generated by EPRI R and D programs (as well as other funding agencies) into qualified equipment and procedures in the shortest possible time. The mission is pursued through three distinct thrusts: technology transfer, training, and resource development. Technology transfer is usually accomplished by a combination of equipment and procedure evaluations and demonstrations. Specific training programs are developed to meet the specific needs of the utility industry. One feature of these programs is the reliance on realistic samples during the training programs. Resource development is oriented toward encouraging more people to pursue NDE as a career. This thrust is implemented by working with interested educational institutions to develop appropriate materials. Work in this project divides naturally into technology and training areas. NDE technology work is focused on improving the inspections applied to heat exchangers, piping, steam turbines, and heavy-section components such as the reactor pressure vessel. Training activities involve the provision of formal courses when a large number of people must become proficient in an improved technology. More details on each of these areas are given in sections that immediately follow

Utilities must leverage existing resources and upgrade technology to avoid future blackouts

International Nuclear Information System (INIS)

Masiello, R.

2004-01-01

The blackout of August 14, 2003 is used as the incentive to examine transmission grid reliability, expose its deficiencies in terms of technology, standards and processes used to manage reliability, and to make recommendations for leveraging existing resources and upgrading both the technology and procedures to avoid similar breakdowns in the future. It is recommended that in the area of monitoring transmission grid reliability utilities should borrow a page from the Enterprise Risk Management Practices of the financial industry by adopting a system which looks beyond the first 'credible' contingency (the current system) and examine many more 'incredible' contingencies, and underlying events that can trigger multiple contingencies, and plan for them in their operations. Utility companies are also urged to upgrade their energy management systems (EMS) technology to be able to deal with the kinds of severely depressed voltages and overloaded circuits that many grids experience today. Investment in new capabilities in control rooms, more and better communications will be essential. EMS algorithms and models must be upgraded to operate under a broader spectrum of grid conditions and to simulate the once-in-a-lifetime outage scenarios that most operators believe could never strike their utility. Expert opinion strongly suggests that as part of this process of upgrading, contingency analysis should shift from the 'N-1' model of the present to a stochastic model that considers a wider range of possible events in a probabilistic framework

Utilities must leverage existing resources and upgrade technology to avoid future blackouts

Energy Technology Data Exchange (ETDEWEB)

Masiello, R. [KEMA Inc. Burlington, MA (United States)

2004-06-01

The blackout of August 14, 2003 is used as the incentive to examine transmission grid reliability, expose its deficiencies in terms of technology, standards and processes used to manage reliability, and to make recommendations for leveraging existing resources and upgrading both the technology and procedures to avoid similar breakdowns in the future. It is recommended that in the area of monitoring transmission grid reliability utilities should borrow a page from the Enterprise Risk Management Practices of the financial industry by adopting a system which looks beyond the first 'credible' contingency (the current system) and examine many more 'incredible' contingencies, and underlying events that can trigger multiple contingencies, and plan for them in their operations. Utility companies are also urged to upgrade their energy management systems (EMS) technology to be able to deal with the kinds of severely depressed voltages and overloaded circuits that many grids experience today. Investment in new capabilities in control rooms, more and better communications will be essential. EMS algorithms and models must be upgraded to operate under a broader spectrum of grid conditions and to simulate the once-in-a-lifetime outage scenarios that most operators believe could never strike their utility. Expert opinion strongly suggests that as part of this process of upgrading, contingency analysis should shift from the 'N-1' model of the present to a stochastic model that considers a wider range of possible events in a probabilistic framework.

Report on achievements in fiscal 1999. Development of technology to utilize biological resources such as composite organism systems (development of technology to utilize and produce composite organism systems); 1999 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

It is intended to achieve the following objectives in terms of the technologies to utilize such functions as material production and material decomposition by using composite organism systems: develop a technology to handle the composite organism systems; establish a composite microorganism cultivation control technology, and a composite microorganism system function strengthening technology; develop a technology to separate and cultivate organism groups constituting them, and develop industrial utilization technologies. The fiscal 1999 has discussed developing the elementary technologies for the technology to utilize functions of the composite organism systems on the following research items: 1. a functional material production technology; and 2. comprehensive investigations and researches. In Item 1, development was made on a technology to detect, separate and cultivate microorganisms in soil as the histochemical analytical technology. Development was made on an in situ detection, separation and function analyzing technology for particular composite microorganisms as the function analyzing technology. In the separation and cultivation technology, development was made on a technology to detect, separate and cultivate difficult-to-cultivate microorganisms. In the functional material production technology, development was made on a technology to utilize microbial consortia producing environmentally harmonizing oil-water separating polymers, and a method to execute artificially the gene exchange in the microbial consortia. (NEDO)

A review of the design and development processes of simulation for training in healthcare - A technology-centered versus a human-centered perspective.

Science.gov (United States)

Persson, Johanna

2017-01-01

This article reviews literature about simulation systems for training in healthcare regarding the prevalence of human-centered approaches in the design and development of these systems, motivated by a tradition in this field of working technology-centered. The results show that the focus on human needs and context of use is limited. It is argued that a reduction of the focus on technical advancements in favor of the needs of the users and the healthcare community, underpinned by human factors and ergonomics theory, is favorable. Due to the low number of identified articles describing or discussing human-centered approaches it is furthermore concluded that the publication culture promotes technical descriptions and summative evaluations rather than descriptions and reflections regarding the design and development processes. Shifting the focus from a technology-centered approach to a human-centered one can aid in the process of creating simulation systems for training in healthcare that are: 1) relevant to the learning objectives, 2) adapted to the needs of users, context and task, and 3) not selected based on technical or fidelity criteria. Copyright © 2016 Elsevier Ltd. All rights reserved.

Utilization of Educational Innovations and Technology in Research and Extension Functions of State Universities

Directory of Open Access Journals (Sweden)

Rosalinda M. Comia

2017-11-01

Full Text Available The study focused on the extent of utilization of the educational innovations and technology in research and extension functions of SUs. The descriptive design, triangulation method, and purposive sampling were applied in this study. The findings revealed that majority of the respondents are married adults and master’s degree graduates with education as their area of specialization. They are permanent in status and have considerable years in the University serving as research or extension officer. Research of SUs have common research thrusts in terms of environment and natural resources management but differ in their own respective agenda; similarly the SUs share common extension thrusts and concerns but differ in their programs, activities and projects related to community services. Commonly encountered problems concern inadequate funds and inability to access the available technology. Officers utilized educational innovations on research and extension to a moderate extent but software and hardware were utilized to a great extent; likewise internet-based communication was utilized to a great extent for research but used moderately for extension. This implies that compared to research, most of the extension functions do not require the use of internet-based communication. From the results of the study, it was recommended that review of the existing allocation of funds for technology development may be done to improve the existing hardware, software and communication facilities.

Center for Center for Technology for Advanced Scientific Component Software (TASCS)

Energy Technology Data Exchange (ETDEWEB)

Kostadin, Damevski [Virginia State Univ., Petersburg, VA (United States)

2015-01-25

A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS)1 tackles these these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.

National Energy Research Scientific Computing Center (NERSC): Advancing the frontiers of computational science and technology

Energy Technology Data Exchange (ETDEWEB)

Hules, J. [ed.

1996-11-01

National Energy Research Scientific Computing Center (NERSC) provides researchers with high-performance computing tools to tackle science`s biggest and most challenging problems. Founded in 1974 by DOE/ER, the Controlled Thermonuclear Research Computer Center was the first unclassified supercomputer center and was the model for those that followed. Over the years the center`s name was changed to the National Magnetic Fusion Energy Computer Center and then to NERSC; it was relocated to LBNL. NERSC, one of the largest unclassified scientific computing resources in the world, is the principal provider of general-purpose computing services to DOE/ER programs: Magnetic Fusion Energy, High Energy and Nuclear Physics, Basic Energy Sciences, Health and Environmental Research, and the Office of Computational and Technology Research. NERSC users are a diverse community located throughout US and in several foreign countries. This brochure describes: the NERSC advantage, its computational resources and services, future technologies, scientific resources, and computational science of scale (interdisciplinary research over a decade or longer; examples: combustion in engines, waste management chemistry, global climate change modeling).

Addressing professional resource challenges facing modern utilities with technological solutions

Energy Technology Data Exchange (ETDEWEB)

Goldie, T. [Hydro One Networks Inc., Toronto, ON (Canada); Hodder, S. [GE Digital Energy, Toronto, ON (Canada)

2008-07-01

The challenges facing electric utilities regarding a shortage of highly qualified labour to maintain, refurbish and expand electrical infrastructure can be attributed to a wave of retirements in skilled employees, a shortage of entry-level workers and a rapidly increasing workload caused by investment in electricity infrastructure. Two solutions were presented for finding and sustaining an adequate personnel base. The first involved developing local talent, both entry-level and mid-career staff to ensure that work continuity and workplace safety are maintained. The second involved the implementation of technological solutions to help optimize the use of existing and future labour resources. This paper presented the human resource programs developed by Hydro One, the largest electrical transmission and distribution utility in the province of Ontario. Their initiatives include raising the profile of the utility work environment through strategic partnerships with educational institutions and developing in house offerings to supplement existing academic programs. This paper also presented a technical solution to address the resources challenges specifically associated with power system protection and control. The solution targets professional and skilled trades involved in the design, installation and maintenance of automated substations and protection and control systems. It is based on the premise that resource optimization can be achieved by reducing inconsistent design and construction practices and replacing these designs with highly standardized materials with digital communications using IEC 61850. This new technology should attract young professionals to the power engineering field while still maintaining a high comfort level with the established professional workforce. 5 refs., 4 figs.

Annual report of Tokyo Metropolitan Isotope Research Center, fiscal year 1994

International Nuclear Information System (INIS)

1995-01-01

This Research Center was founded in 1959, and has carried out the research, test and guidance regarding industry, agriculture and fishry, medical treatment, environment preservation and radiation protection by utilizing the merits of radiation and based on the needs of the age, thus obtained good results. Recently, by the adoption of an ion accelerator, the application to advanced technology such as ion implantation has been tried, and the development of advanced measurement technology using PIXE and RBS has been carried out. In fiscal year 1994, the results have been obtained in the research 'Development of the method of evaluating the nobility of noble metal products by nondestructive inspection'. Also the research on the development of the technology for utilizing the ion accelerator was started. The researches on making radiation breeding of Chinese cabbage efficient and the business of technically supporting the activation of medium and small enterprises were advanced. The history, organization and budget of this Research Center, the reports of research and investigation, safety control, the publication of research, events and others are reported. (K.I.)

Development of laser technology in Research Center of Laser Fusion

International Nuclear Information System (INIS)

Zheng Wanguo; Deng Ying; Zhou Wei

2013-01-01

This paper reviews the progress in the construction of SG-Ⅲ laser facility, integrated Testbed and XG-Ⅲ laser facility and that in the upgrade of the prototype of SG-Ⅲ, and the development in assembling and installing technology, and the achievements in maintaining cleanliness project and metrology in Laser Fusion Research Center, China Academy of Engineering Physics in China in 2012. (authors)

Technological drivers in data centers and telecom systems: Multiscale thermal, electrical, and energy management

International Nuclear Information System (INIS)

Garimella, Suresh V.; Persoons, Tim; Weibel, Justin; Yeh, Lian-Tuu

2013-01-01

Highlights: ► Thermal management approaches reviewed against energy usage of IT industry. ► Challenges of energy efficiency in large-scale electronic systems highlighted. ► Underlying drivers for progress at the business and technology levels identified. ► Thermal, electrical and energy management challenges discussed as drivers. ► Views of IT system operators, manufacturers and integrators represented. - Abstract: We identify technological drivers for tomorrow’s data centers and telecommunications systems, including thermal, electrical and energy management challenges, based on discussions at the 2nd Workshop on Thermal Management in Telecommunication Systems and Data Centers in Santa Clara, California, on April 25–26, 2012. The relevance of thermal management in electronic systems is reviewed against the background of the energy usage of the information technology (IT) industry, encompassing perspectives of different sectors of the industry. The underlying drivers for progress at the business and technology levels are identified. The technological challenges are reviewed in two main categories – immediate needs and future needs. Enabling cooling techniques that are currently under development are also discussed

Development of New Materials and Technologies for Welding and Surfacing at Research and Production Center 'Welding Processes and Technologies'

International Nuclear Information System (INIS)

Kozyrev, N A; Kryukov, R E; Galevsky, G V; Titov, D A; Shurupov, V M

2015-01-01

The paper provides description of research into the influence of new materials and technologies on quality parameters of welds and added metal carried out at research and production center «Welding processes and technologies».New welding technologies of tanks for northern conditions are considered, as well as technologies of submerged arc welding involving fluxing agents AN - 348, AN - 60, AN - 67, OK. 10.71 and carbon-fluorine containing additives, new flux cored wires and surfacing technologies, teaching programs and a trainer for welders are designed. (paper)

Texas Manufacturing Technology Center feasibility study for the Inland Regional Industrial Technology Institute

International Nuclear Information System (INIS)

1994-01-01

This document presents the Texas Manufacturing Technology Center (TMTC) Business Plan to convert the Central Facility of the Superconducting Super Collider project to alternate uses. The plan is divided into six sections: (1) Executive Summary, (2) Market and Benefit Analysis, (3) Marketing Strategy, (4) Services, (5) Organization and Operations Overview, and (6) Financial Plan. Each area is supported by separate documents that address individual opportunities and challenges associated with transitioning the facility, and its asset base to new uses for benefit of the locality, state, region and nation

Jackson State University (JSU)’s Center of Excellence in Science, Technology, Engineering, and Mathematics Education (CESTEME)

Science.gov (United States)

2016-01-08

Actuarial Science Taylor, Triniti Lanier Alcorn State University Animal Science Tchounwou, Hervey Madison Central Jackson State University Computer...for Public Release; Distribution Unlimited Final Report: Jackson State University (JSU)’s Center of Excellence in Science , Technology, Engineering...Final Report: Jackson State University (JSU)’s Center of Excellence in Science , Technology, Engineering, and Mathematics Education (CESTEME) Report

Evolving technologies drive the new roles of Biomedical Engineering.

Science.gov (United States)

Frisch, P H; St Germain, J; Lui, W

2008-01-01

Rapidly changing technology coupled with the financial impact of organized health care, has required hospital Biomedical Engineering organizations to augment their traditional operational and business models to increase their role in developing enhanced clinical applications utilizing new and evolving technologies. The deployment of these technology based applications has required Biomedical Engineering organizations to re-organize to optimize the manner in which they provide and manage services. Memorial Sloan-Kettering Cancer Center has implemented a strategy to explore evolving technologies integrating them into enhanced clinical applications while optimally utilizing the expertise of the traditional Biomedical Engineering component (Clinical Engineering) to provide expanded support in technology / equipment management, device repair, preventive maintenance and integration with legacy clinical systems. Specifically, Biomedical Engineering is an integral component of the Medical Physics Department which provides comprehensive and integrated support to the Center in advanced physical, technical and engineering technology. This organizational structure emphasizes the integration and collaboration between a spectrum of technical expertise for clinical support and equipment management roles. The high cost of clinical equipment purchases coupled with the increasing cost of service has driven equipment management responsibilities to include significant business and financial aspects to provide a cost effective service model. This case study details the dynamics of these expanded roles, future initiatives and benefits for Biomedical Engineering and Memorial Sloan Kettering Cancer Center.

Innovative technology summary report: Light duty utility arm

International Nuclear Information System (INIS)

1998-01-01

The Light-Duty Utility Arm (LDUA) System is a mobile, multi-axis positioning system capable of deploying tools and sensors (end effecters) inside radioactive waste tanks for tank wall inspection, waste characterization, and waste retrieval. The LDUA robotic manipulator enters a tank through existing openings (risers) in the tank dome of the underground tanks. Using various end effecters, the LDUA System is a versatile system for high-level waste tank remediation. The LDUA System provides a means to deploy tools, while increasing the technology resources available to the U.S. Department of Energy (DOE). Ongoing end effecter development will provide additional capabilities to remediate the waste tanks

Technology Applications Team: Applications of aerospace technology

Science.gov (United States)

1993-01-01

Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

The World Wide Web and Technology Transfer at NASA Langley Research Center

Science.gov (United States)

Nelson, Michael L.; Bianco, David J.

1994-01-01

NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a Center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of the WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology Opportunities Showcase (TOPS), an industrial partnering showcase that exists on the Web long after the actual 3-day event ended. During its first year on the Web, LaRC also developed several WWW-based information repositories. The Langley Technical Report Server (LTRS), a technical paper delivery system with integrated searching and retrieval, has proved to be quite popular. The NASA Technical Report Server (NTRS), an outgrowth of LTRS, provides uniform access to many logically similar, yet physically distributed NASA report servers. WWW is also the foundation of the Langley Software Server (LSS), an experimental software distribution system which will distribute LaRC-developed software with the possible phase-out of NASA's COSMIC program. In addition to the more formal technology distribution projects, WWW has been successful in connecting people with technologies and people with other people. With the completion of the LaRC reorganization, the Technology Applications Group, charged with interfacing with non-aerospace companies, opened for business with a popular home page.

Development of the advanced load leveling air conditioning technology utilizing unutilized energy; Miriyo energy kodo katsuyo fuka heijunka reidanbo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

A heat supply plant utilizing unutilized energy is called for environment-friendly efficient operation including stable heat supply, energy saving, CO{sub 2} emission control and power load leveling. Toshiba developed the optimum operation system for environment-friendly efficient operation considering heat demand prediction and characteristics of a heat supply plant. The demonstration test result showed that this system is effective to reduce power cost of a heat supply plant by nearly 15%. This system was promoted by joint research of NEDO, Heat Pump and Thermal Storage Technology Center of Japan and Toshiba supported by Agency of Natural Resources and Energy, MITI. (translated by NEDO)

Accelerator laboratories: development centers for experimental physics and technology in Mexico

International Nuclear Information System (INIS)

Mazari, M.

1989-01-01

Three years ago in this Nuclear Center the author and Professor Graef expounded the inception and development of experimental physics and new techniques centered about laboratories and equipped in our country with positive ion accelerators. Extracted here is the information on the laboratories that have allowed professional training as well as the furtherance of scientific productivity in each group. An additional proposal as to how the technical groups knowledgeable in advanced technology might contribute significantly to adequate preparation of youth at the intermediate level able to generate innocuous micro industries in their own neighbourhood. (Author). 5 refs, 2 figs, 2 tabs

Publications in academic medical centers: technology-facilitated culture clash.

Science.gov (United States)

Berner, Eta S

2014-05-01

Academic culture has a set of norms, expectations, and values that are sometimes tacit and sometimes very explicit. In medical school and other health professions educational settings, probably the most common norm includes placing a high value on peer-reviewed research publications, which are seen as the major evidence of scholarly productivity. Other features of academic culture include encouraging junior faculty and graduate students to share their research results at professional conferences and lecturing with slides as a major way to convey information. Major values that faculty share with journal editors include responsible conduct of research and proper attribution of others' words and ideas. Medical school faculty also value technology and are often quick to embrace technological advances that can assist them in their teaching and research. This article addresses the effects of technology on three aspects of academic culture: education, presentations at professional meetings, and research publications.The technologies discussed include online instruction, dissemination of conference proceedings on the Internet, plagiarism-detection software, and new technologies deployed by the National Center for Biotechnology Information, the home of PubMed. The author describes how the ease of deploying new technologies without faculty changing their norms and behavior in the areas of teaching and research can lead to conflicts of values among key stakeholders in the academic medical community, including faculty, journal editors, and professional associations. The implications of these conflicts and strategies for managing them are discussed.

Sustainable Biofuels Development Center

Energy Technology Data Exchange (ETDEWEB)

Reardon, Kenneth F. [Colorado State Univ., Fort Collins, CO (United States)

2015-03-01

The mission of the Sustainable Bioenergy Development Center (SBDC) is to enhance the capability of America’s bioenergy industry to produce transportation fuels and chemical feedstocks on a large scale, with significant energy yields, at competitive cost, through sustainable production techniques. Research within the SBDC is organized in five areas: (1) Development of Sustainable Crops and Agricultural Strategies, (2) Improvement of Biomass Processing Technologies, (3) Biofuel Characterization and Engine Adaptation, (4) Production of Byproducts for Sustainable Biorefining, and (5) Sustainability Assessment, including evaluation of the ecosystem/climate change implication of center research and evaluation of the policy implications of widespread production and utilization of bioenergy. The overall goal of this project is to develop new sustainable bioenergy-related technologies. To achieve that goal, three specific activities were supported with DOE funds: bioenergy-related research initiation projects, bioenergy research and education via support of undergraduate and graduate students, and Research Support Activities (equipment purchases, travel to attend bioenergy conferences, and seminars). Numerous research findings in diverse fields related to bioenergy were produced from these activities and are summarized in this report.

A Study on Guidelines for the Utilization of Unproven MMIS Technology In Nuclear Power Plant Application

International Nuclear Information System (INIS)

Kang, Sung Kon; Shin, Yeong Cheol; Bae, Byoung Hwan

2007-01-01

New MMIS (Man Machine Interface System) technology is rapidly advanced as digital technology provides opportunity for more functionality and better cost effectiveness and NPP (Nuclear Power Plant) operators are inclined to use the new technology for the construction of new plant and for the upgrade of existing plants. However, this new technology poses risks to the NPP operators at the same time. These risks are mainly due to the poor reliability of newly developed technology. KHNP's past experiences with the new MMIS equipment shows many cases of reliability problem. And their consequences include unintended plant trips, lowered acceptance of the new digital technology by the plant I and C maintenance crew, and increased licensing burden in answering for questions from the nuclear regulatory body. Considering the fact that the risk of these failures in the nuclear plant operation is far greater than those in other industry, utilities require proven technology for the MMIS in nuclear power plants. So that new MMIS technology might be testified as proven technology, guidelines for the utilization of unproven MMIS technology in nuclear power plant application is required for applying new advanced MMIS technology which is apparently needed to obtain a definite gain in simplicity or performance

Technologies and experimental approaches in the NIH Botanical Research Centers

Science.gov (United States)

Barnes, Stephen; Birt, Diane F; Cassileth, Barrie R; Cefalu, William T; Chilton, Floyd H; Farnsworth, Norman R; Raskin, Ilya; van Breemen, Richard B; Weaver, Connie M

2009-01-01

There are many similarities between research on combinatorial chemistry and natural products and research on dietary supplements and botanicals in the NIH Botanical Research Centers. The technologies in the centers are similar to those used by other NIH-sponsored investigators. All centers rigorously examine the authenticity of botanical dietary supplements and determine the composition and concentrations of the phytochemicals therein, most often by liquid chromatography–mass spectrometry. Several of the centers specialize in fractionation and high-throughput evaluation to identify the individual bioactive agent or a combination of agents. Some centers are using DNA microarray analyses to determine the effects of botanicals on gene transcription with the goal of uncovering the important biochemical pathways they regulate. Other centers focus on bioavailability and uptake, distribution, metabolism, and excretion of the phytochemicals as for all xenobiotics. Because phytochemicals are often complex molecules, synthesis of isotopically labeled forms is carried out by plant cells in culture, followed by careful fractionation. These labeled phytochemicals allow the use of accelerator mass spectrometry to trace the tissue distribution of 14C-labeled proanthocyanidins in animal models of disease. State-of-the-art proteomics and mass spectrometry are also used to identify proteins in selected tissues whose expression and posttranslational modification are influenced by botanicals and dietary supplements. In summary, the skills needed to carry out botanical centers’ research are extensive and may exceed those practiced by most NIH investigators. PMID:18258642

The rehabilitation engineering research center for the advancement of cognitive technologies.

Science.gov (United States)

Heyn, Patricia Cristine; Cassidy, Joy Lucille; Bodine, Cathy

2015-02-01

Barring few exceptions, allied health professionals, engineers, manufacturers of assistive technologies (ATs), and consumer product manufacturers have developed few technologies for individuals with cognitive impairments (CIs). In 2004, the National Institute on Disability Rehabilitation Research (NIDRR) recognized the need to support research in this emergent field. They funded the first Rehabilitation Engineering Research Center for the Advancement of Cognitive Technologies (RERC-ACT). The RERC-ACT has since designed and evaluated existing and emerging technologies through rigorous research, improving upon existing AT devices, and creating new technologies for individuals with CIs. The RERC-ACT has contributed to the development and testing of AT products that assist persons with CIs to actively engage in tasks of daily living at home, school, work, and in the community. This article highlights the RERC-ACT's engineering development and research projects and discusses how current research may impact the quality of life for an aging population. © The Author(s) 2014.

Vaccines for HIV | NCI Technology Transfer Center | TTC

Science.gov (United States)

The development of an effective HIV vaccine has been an ongoing area of research. The high variability in HIV-1 virus strains has represented a major challenge in successful development. Ideally, an effective candidate vaccine would provide protection against the majority of clades of HIV. Two major hurdles to overcome are immunodominance and sequence diversity. This vaccine utilizes a strategy for overcoming these two issues by identifying the conserved regions of the virus and exploiting them for use in a targeted therapy. NCI seeks licensees and/or research collaborators to commercialize this technology, which has been validated in macaque models.

What's new with nurseries and reforestation projects at the Missoula Technology and Development Center?

Science.gov (United States)

Bob Simonson

2011-01-01

The USDA Forest Service Missoula Technology and Development Center (MTDC) offers technical expertise, technology transfer, and new equipment development to federal, state, and private forest nurseries. Current and recently completed projects at MTDC include a front and mid-mount tractor evaluation, ATV-pulled mechanical tree planter, greenhouse snow remover, freeze...

Armstrong Flight Research Center Research Technology and Engineering Report 2015

Science.gov (United States)

Voracek, David F.

2016-01-01

I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

Using Technology, Clinical Workflow Redesign, and Team Solutions to Achieve the Patient Centered Medical Home

Science.gov (United States)

2011-01-01

Redesign, and Team Solutions to Achieve the Patient Centered Medical Home LTC Nicole Kerkenbush, MHA, MN Army Medical Department, Office of the...TITLE AND SUBTITLE Using Technology, Clinical Workflow Redesign, and Team Solutions to Achieve the Patient Centered Medical Home 5a. CONTRACT...Describe how these tools are being used to implement the Patient Centered Medical Home care model 2 2011 MHS Conference MEDCOM AHLTA Provider Satisfaction

Utilization of Mental Health Services in School-Based Health Centers.

Science.gov (United States)

Bains, Ranbir M; Cusson, Regina; White-Frese, Jesse; Walsh, Stephen

2017-08-01

We summarize utilization patterns for mental health services in school-based health centers. Administrative data on school-based health center visits in New Haven, Connecticut were examined for the 2007-2009 school years. Relative frequencies of mental health visits by age were calculated as a percentage of all visits and were stratified by sex, ethnicity/race, and insurance status. Mental health visits accounted for the highest proportion of visits (31.8%). The proportion of mental health visits was highest at 8 years (42.8%) and at 13 years (39.0%). The proportion of mental health visits among boys (38.4%) was higher than among girls (26.7%). Hispanic students had a lower proportion of mental health visits than black students (23.5% vs 35.8%) in all but 2 age groups. Students in the white/other ethnicity category had higher proportions of mental health visits than Hispanic and black students between ages 12 and 15. Students with no health insurance (22.5%) had lower proportions of mental health visits than students covered by Medicaid (34.3%) or private insurance (33.9%). The percentage of mental health visits by students with private insurance was highest (37.2%-49%) in the 13-15 age range. Usage patterns for mental health issues show pronounced, nonrandom variation relative to age and other demographic characteristics especially with 8-year-old boys. © 2017, American School Health Association.

The Importance of Innovation: Diffusion Theory and Technological Progress in Writing Centers.

Science.gov (United States)

Inman, James A.

2000-01-01

Suggests that all stakeholders should share a focus on "innovations," referring here simultaneously to technologies and their social, cultural, political, and historical contexts. Introduces a new perspective through which writing center professionals can approach collaborative relationships with other stakeholders in the move towards…

The Savannah River Technology Center environmental monitoring field test platform

International Nuclear Information System (INIS)

Rossabi, J.

1993-01-01

Nearly all industrial facilities have been responsible for introducing synthetic chemicals into the environment. The Savannah River Site is no exception. Several areas at the site have been contaminated by chlorinated volatile organic chemicals. Because of the persistence and refractory nature of these contaminants, a complete clean up of the site will take many years. A major focus of the mission of the Environmental Sciences Section of the Savannah River Technology Center is to develop better, faster, and less expensive methods for characterizing, monitoring, and remediating the subsurface. These new methods can then be applied directly at the Savannah River Site and at other contaminated areas in the United States and throughout the world. The Environmental Sciences Section has hosted field testing of many different monitoring technologies over the past two years primarily as a result of the Integrated Demonstration Program sponsored by the Department of Energy's Office of Technology Development. This paper provides an overview of some of the technologies that have been demonstrated at the site and briefly discusses the applicability of these techniques

Follow on Research for Multi-Utility Technology Test Bed Aircraft at NASA Dryden Flight Research Center (FY13 Progress Report)

Science.gov (United States)

Pak, Chan-Gi

2013-01-01

Modern aircraft employ a significant fraction of their weight in composite materials to reduce weight and improve performance. Aircraft aeroservoelastic models are typically characterized by significant levels of model parameter uncertainty due to the composite manufacturing process. Small modeling errors in the finite element model will eventually induce errors in the structural flexibility and mass, thus propagating into unpredictable errors in the unsteady aerodynamics and the control law design. One of the primary objectives of Multi Utility Technology Test-bed (MUTT) aircraft is the flight demonstration of active flutter suppression, and therefore in this study, the identification of the primary and secondary modes for the structural model tuning based on the flutter analysis of MUTT aircraft. The ground vibration test-validated structural dynamic finite element model of the MUTT aircraft is created in this study. The structural dynamic finite element model of MUTT aircraft is improved using the in-house Multi-disciplinary Design, Analysis, and Optimization tool. In this study, two different weight configurations of MUTT aircraft have been improved simultaneously in a single model tuning procedure.

The utilization of websites for fundraising by NCI-designated cancer centers: Examining the capacity for dialogic communication with prospective donors.

Science.gov (United States)

Erwin, Cathleen O; Dias, Ashley M

2016-01-01

The study employs a dialogic public relations framework to explore the utilization of the Internet for fundraising by nonprofit health care organizations-specifically, NCI-designated cancer centers. Cancer centers have been noted for effective websites and for being highly engaged in fundraising, which is characterized as relationship marketing. Results indicate all but one cancer center use websites and social media for fundraising but are limited in capacity for two-way symmetrical dialogue. Results are discussed and recommendations are made for future research.

Coupling renewables via hydrogen into utilities: Temporal and spatial issues, and technology opportunities

Energy Technology Data Exchange (ETDEWEB)

Iannucci, J.J.; Horgan, S.A.; Eyer, J.M. [Distributed Utility Associates, San Ramon, CA (United States)] [and others

1996-10-01

This paper discusses the technical potential for hydrogen used as an energy storage medium to couple time-dependent renewable energy into time-dependent electric utility loads. This analysis will provide estimates of regional and national opportunities for hydrogen production, storage and conversion, based on current and near-term leading renewable energy and hydrogen production and storage technologies. Appropriate renewable technologies, wind, photovoltaics and solar thermal, are matched to their most viable regional resources. The renewables are assumed to produce electricity which will be instantaneously used by the local utility to meet its loads; any excess electricity will be used to produce hydrogen electrolytically and stored for later use. Results are derived based on a range of assumptions of renewable power plant capacity and fraction of regional electric load to be met (e.g., the amount of hydrogen storage required to meet the Northwest region`s top 10% of electric load). For each renewable technology national and regional totals will be developed for maximum hydrogen production per year and ranges of hydrogen storage capacity needed in each year (hydroelectric case excluded). The sensitivity of the answers to the fraction of peak load to be served and the land area dedicated for renewable resources are investigated. These analyses can serve as a starting point for projecting the market opportunity for hydrogen storage and distribution technologies. Sensitivities will be performed for hydrogen production, conversion. and storage efficiencies representing current and near-term hydrogen technologies.

Combined Neutron Center for European Research and Technology

International Nuclear Information System (INIS)

Lagniel, Jean-Michel

2002-01-01

High-power proton linacs are needed as driver for several applications, namely transmutation of nuclear waste using Accelerator Driven Systems (ADS), spallation neutron sources (ESS in Europe) and other fields of basic and applied research (next generation of radioactive ion beam facilities, neutrino factories, muon colliders, irradiation facilities for material testing...). The possible synergies among these projects will be pointed out and the feasibility study of high-power proton linac used as driver of a multi-user facility (CONCERT) will be presented. There was excellent scientific, technical and economic reasons to study a Combined Neutron Center for European Research and Technology (CONCERT) based on a high-power proton accelerator. Such an installation would serve condensed matter studies by spallation neutron scattering, a technological irradiation tool and R and D facility for an hybrid reactor demonstrator, a radioactive ion beam facility for nuclear physics, R and D developments for a muon/neutrino facility. The installation could therefore constitute a European center of excellence in the field of neutronics where a large number of scientific and technical executives could be trained. The CONCERT Project Team has performed the feasibility study of such a multi-user facility with: - a review of the beam needs for the different applications, - an analyze of their compatibility, - the definition of the scope of a site-independent project, - a selection of the most appropriate options regarding scientific, technical, financial, organizational and administrative aspects, - an estimation of the costs for construction, operation and the needs in manpower. The conceptual design report [17] is sufficiently detailed to minimize contingencies on those parts of the project having a large potential impact in terms of performances, costs or delays. (author)

Career and Technology Center Guides Students in Real-Life Careers | Poster

Science.gov (United States)

By Carolynne Keenan, Contributing Writer Frederick County Public School students have a unique opportunity—a chance to get a real-world, hands-on experience in biomedical science and biotechnology before they even graduate from high school, thanks to the Frederick County Career and Technology Center (CTC). Several years ago, the CTC established its biomedical sciences program

Calcined Waste Storage at the Idaho Nuclear Technology and Engineering Center

Energy Technology Data Exchange (ETDEWEB)

M. D. Staiger

2007-06-01

This report provides a quantitative inventory and composition (chemical and radioactivity) of calcined waste stored at the Idaho Nuclear Technology and Engineering Center. From December 1963 through May 2000, liquid radioactive wastes generated by spent nuclear fuel reprocessing were converted into a solid, granular form called calcine. This report also contains a description of the calcine storage bins.

(Pittsburgh Energy Technology Center): Quarterly technical progress report for the period ending June 30, 1987. [Advanced Coal Research and Technology Development Programs

Energy Technology Data Exchange (ETDEWEB)

None

1988-02-01

Research programs on coal and coal liquefaction are presented. Topics discussed are: coal science, combustion, kinetics, surface science; advanced technology projects in liquefaction; two stage liquefaction and direct liquefaction; catalysts of liquefaction; Fischer-Tropsch synthesis and thermodynamics; alternative fuels utilization; coal preparation; biodegradation; advanced combustion technology; flue gas cleanup; environmental coordination, and technology transfer. Individual projects are processed separately for the data base. (CBS)

7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts

International Nuclear Information System (INIS)

2012-01-01

This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques

Anticipated development of radiation safety corresponding to utilization of nuclear technology in Vietnam

International Nuclear Information System (INIS)

Tran, Toan Ngoc; Le, Thiem Ngoc

2010-01-01

In the past, due to the limited application of radiation and radioisotope in the national economic branches, radiation safety was not paid much attention to in Vietnam. However, according to the Strategy for Peaceful Utilization of Atomic Energy up to 2020 approved by the Prime Minister on January 3, 2006 the application of radiation and radioisotopes as well as nuclear power in Vietnam is expected increasing strongly and widely, then radiation safety should be developed correspondingly. This paper presents the history of radiation protection, the current status and prospect of utilization of atomic energy and the anticipated development of the national radiation safety system to meet the demand of utilization of nuclear technology in Vietnam. (author)

Assessment of Outreach by a Regional Burn Center: Could Referral Criteria Revision Help with Utilization of Resources?

Science.gov (United States)

Carter, Nicholas H; Leonard, Clint; Rae, Lisa

2018-02-20

The objectives of this study were to identify trends in preburn center care, assess needs for outreach and education efforts, and evaluate resource utilization with regard to referral criteria. We hypothesized that many transferred patients were discharged home after brief hospitalizations and without need for operation. Retrospective chart review was performed for all adult and pediatric transfers to our regional burn center from July 2012 to July 2014. Details of initial management including TBSA estimation, fluid resuscitation, and intubation status were recorded. Mode of transport, burn center length of stay, need for operation, and in-hospital mortality were analyzed. In two years, our burn center received 1004 referrals from other hospitals including 713 inpatient transfers. Within this group, 621 were included in the study. Among transferred patients, 476 (77%) had burns less than 10% TBSA, 69 (11%) had burns between 10-20% TBSA, and 76 (12%) had burns greater than 20% TBSA. Referring providers did not document TBSA for 261 (42%) of patients. Among patients with less than 10% TBSA burns, 196 (41%) received fluid boluses. Among patients with TBSA < 10%, 196 (41%) were sent home from the emergency department or discharged within 24 hours, and an additional 144 (30%) were discharged within 48 hours. Overall, 187 (30%) patients required an operation. In-hospital mortality rates were 1.5% for patients who arrived by ground transport, 14.9% for rotor wing transport, and 18.2% for fixed wing transport. Future education efforts should emphasize the importance of calculating TBSA to guide need for fluid resuscitation and restricting fluid boluses to patients that are hypotensive. Clarifying the American Burn Association burn center referral criteria to distinguish between immediate transfer vs outpatient referral may improve patient care and resource utilization.

Distance Learning With NASA Lewis Research Center's Learning Technologies Project

Science.gov (United States)

Petersen, Ruth

1998-01-01

The NASA Lewis Research Center's Learning Technologies Project (LTP) has responded to requests from local school district technology coordinators to provide content for videoconferencing workshops. Over the past year we have offered three teacher professional development workshops that showcase NASA Lewis-developed educational products and NASA educational Internet sites. In order to determine the direction of our involvement with distance learning, the LTP staff conducted a survey of 500 U.S. schools. We received responses from 72 schools that either currently use distance learning or will be using distance learning in 98-99 school year. The results of the survey are summarized in the article. In addition, the article provides information on distance learners, distance learning technologies, and the NASA Lewis LTP videoconferencing workshops. The LTP staff will continue to offer teacher development workshops through videoconferencing during the 98-99 school year. We hope to add workshops on new educational products as they are developed at NASA Lewis.

World Key Information Service System Designed For EPCOT Center

Science.gov (United States)

Kelsey, J. A.

1984-03-01

An advanced Bell Laboratories and Western Electric designed electronic information retrieval system utilizing the latest Information Age technologies, and a fiber optic transmission system is featured at the Walt Disney World Resort's newest theme park - The Experimental Prototype Community of Tomorrow (EPCOT Center). The project is an interactive audio, video and text information system that is deployed at key locations within the park. The touch sensitive terminals utilizing the ARIEL (Automatic Retrieval of Information Electronically) System is interconnected by a Western Electric designed and manufactured lightwave transmission system.

Information technology leadership in academic medical centers: a tale of four cultures.

Science.gov (United States)

Friedman, C P

1999-07-01

Persons and groups within academic medical centers bring consistent and predictable viewpoints to planning and decision making. The varied professional and academic cultures of these individuals appear to account primarily for the diversity of their viewpoints. Understanding these professional cultures can help leaders achieve some predictability in the complex environments for which they are responsible. Leaders in information technology in particular, in order to be successful, must become part-time anthropologists, immersing themselves in the varied workplaces of their constituents to understand the work they do and the cultures that have grown up around this work. Only in this way will they be able to manage the challenges that arise continuously as the technology and the needs it can address change over time. In this article, the author briefly describes the concept of culture, portrays four specific professional cultures that typically coexist in academic medical centers, and argues that understanding these cultures is absolutely critical to effective management and use of information resources.

Environmentally friendly type coal utilization technology transfer project. Downstream field; Kankyo chowagata sekitan riyo gijutsu iten jigyo. Karyu bun`ya

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The paper arranged the result of the clean coal technology transfer project carried out during October to December, 1996. For the purpose of supporting introduction/spread of clean coal technology (CCT) in Asian and Pacific countries, the project invited engineers of the countries to Japan, aiming at fermentation of the understanding of CCT and improvement in ability. The project was held by NEDO and managed by Center for Coal Utilization, Japan. The manager course is for policy decision makers, management and senior management (plant manager class). By taking up CCT assessment and a menu of economical efficiency, prepared was the environment to which CCT is introduced in case of working out policy and planning plant/equipment investment. Moreover, the engineer course is for policy planners, medium-class management (section chief class), senior engineers (planners), and takes up materials for judgment in case of planning CCT facilities and proposing measures to reduce environmental loads by management and improvement of facilities at the same time. Fifteen engineers were invited: 6 from China, 3 from Indonesia, 3 from the Philippines, and 3 from Thailand

Self-assembling nano-diameter needlelike pinning centers in YBCO, utilizing a foreign element dopant

Energy Technology Data Exchange (ETDEWEB)

Sawh, Ravi-Persad [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States); Weinstein, Roy [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States); Obot, Victor [Department of Mathematics, Texas Southern University, 3100 Cleburne St, Houston Texas 77004-4597 (United States); Parks, Drew [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States); Gandini, Alberto [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States); Skorpenske, Harley [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States)

2006-06-01

Although pinning centers created by irradiation presently produce the highest J{sub c}, it is probable that ultimately these will be emulated by chemical pinning centers. The best pinning centers produced by irradiation nevertheless provide guidelines for desirable morphology of chemical pinning structures. The highest J{sub c} produced earlier in textured HTS was obtained using isotropic high-energy ions produced by fission of {sup 235}U. This so-called U/n process produces pinning centers of diameter {<=} 4.5 nm, with an effective length of {approx}2.7 {mu}m. Maximum J{sub c} occurs for pinning center density of {approx}10{sup 10} cm{sup -3}. We use this as a model for desired chemical pinning centers. Our approach to introducing chemical pinning centers has been to produce precipitates within the HTS containing elements not native to the HTS, and to seek needlelike (columnar) deposits of small diameter. We report here on the formation of needlelike or columnar deposits in textured Y123 containing a dopant foreign to Y123. It serves as a demonstration that self-assembling nanometer diameter columns utilizing a dopant foreign to the HTS system are a feasible goal. These deposits, however, do not fully meet the ultimate requirements of pinning centers because the desired deposits should be smaller. The self-assembling columns formed contain titanium, are {approx}500 nm in diameter, and up to 10 {mu}m long. The size and morphology of the deposits vary with the mass of admixed Ti dopant. J{sub c} is decreased for small dopant mass. At larger dopant masses needlelike precipitates form, and J{sub c} increases again. A small range of mass of admixed Ti exists in which J{sub c} is enhanced by pinning. In the range of admixed Ti mass studied in these experiments there is a negligible effect on T{sub c}. Magnetization studies of J{sub c} are also reported.

Available decontamination and decommissioning capabilities at the Savannah River Technology Center

International Nuclear Information System (INIS)

Polizzi, L.M.; Norkus, J.K.; Paik, I.K.; Wooten, L.A.

1992-01-01

The Safety Analysis and Engineering Services Group has performed a survey of the Savannah River Technology Center (SRTC) technical capabilities, skills, and experience in Decontamination and Decommissioning (D ampersand D) activities. The goal of this survey is to enhance the integration of the SRTC capabilities with the technical needs of the Environmental Restoration Department D ampersand D program and the DOE Office of Technology Development through the Integrated Demonstration Program. This survey has identified technical capabilities, skills, and experience in the following D ampersand D areas: Characterization, Decontamination, Dismantlement, Material Disposal, Remote Systems, and support on Safety Technology for D ampersand D. This review demonstrates the depth and wealth of technical capability resident in the SRTC in relation to these activities, and the unique qualifications of the SRTC to supply technical support in the area of DOE facility D ampersand D. Additional details on specific technologies and applications to D ampersand D will be made available on request

Solid and liquid radioactive waste management of the Nuclear Technology Development Center (CDTN) - NUCLEBRAS

International Nuclear Information System (INIS)

Guzella, M.F.R.; Miaw, S.T.W.; Mourao, R.P.; Prado, M.A.S. do; Reis, L.C.A.; Santos, P.O.; Silva, E.M.P.

1986-01-01

Low level liquid and solid wastes are produced in several laboratories of the NUCLEAR TECHNOLOGY DEVELOPMENT CENTER (CDTN)-NUCLEBRAS. In the last years, the intensification of technical activities at the Center has increased the radioactive waste volumes. Therefore, the implementation of a Radioactive Waste Management Program has begun. This Program includes the systematic of activities from the waste collection to the transportation for the final disposal. The liquid and solid waste are collected separately in proper containers and stored for later treatment according to the processes available or under development at the Center. (Author) [pt

Solid and liquid radioactive waste management of the Nuclear Technology Development Center (CDTN)- Nuclebras

International Nuclear Information System (INIS)

Guzella, M.F.R.; Mourao, R.P.; Reis, L.C.A.; Silva, E.M.P.; Miaw, S.T.W.; Prado, M.A.S.; Santos, P.O.

1986-01-01

Low level liquid and solid wastes are produced in several laboratories of the NUCLEAR TECHNOLOGY DEVELOPMENT CENTER (CDTN) - NUCLEBRAS. In the last years, the intensification of technical activities at the Center has increased the radioactive waste volumes. Therefore, the implementation of a Radioactive Waste Management Program has begun. This Program includes the systematic of activities from the waste collection to the transportation for the final disposal. The liquid and solid waste are collected separately in proper containers and stored for later treatment according to the processes available or under development at the Center. (Author) [pt

Development for environmentally friendly and highly efficient energy utilization system in fiscal 1998. Pt. 3. Research on highly efficient and effective energy utilization technology (Research on design technology for optimal system); 1998 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu. 3. Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

This paper summarizes achievements during fiscal 1998 on researching part of the energy transportation and storage technologies, energy supply and utilization technologies, environmental load reducing technologies, and optimal system design in the 'research on highly efficient and effective energy utilization technology'. With regard to energy transportation and storage technologies, researches and developments were performed on a vacuum adiabatic transportation piping system, surfactants used for high-density heat transportation and high-density latent heat transportation technologies. In the field of energy supply and utilization technologies, researches and developments were carried out on a heat supply system using high-performance heat pumps capable of using multiple kinds of fuels, and a compression and absorption type hybrid heat utilization system. For the environmental load reducing technologies, research and development were performed on a power saving heat pump system utilizing natural coolant. In researching the optimal system design technologies, overall adjustment was made on the element technologies, whereas technological discussions and site surveys were executed by the committees at the same time. The latest achievements accomplished to date was published in a book. (NEDO)

A Measurement Management Technology for Improving Energy Efficiency in Data Centers and Telecommunication Facilities

Energy Technology Data Exchange (ETDEWEB)

Hendrik Hamann, Levente Klein

2012-06-28

Data center (DC) electricity use is increasing at an annual rate of over 20% and presents a concern for the Information Technology (IT) industry, governments, and the society. A large fraction of the energy use is consumed by the compressor cooling to maintain the recommended operating conditions for IT equipment. The most common way to improve the DC efficiency is achieved by optimally provisioning the cooling power to match the global heat dissipation in the DC. However, at a more granular level, the large range of heat densities of today's IT equipment makes the task of provisioning cooling power optimized to the level of individual computer room air conditioning (CRAC) units much more challenging. Distributed sensing within a DC enables the development of new strategies to improve energy efficiency, such as hot spot elimination through targeted cooling, matching power consumption at rack level with workload schedule, and minimizing power losses. The scope of Measurement and Management Technologies (MMT) is to develop a software tool and the underlying sensing technology to provide critical decision support and control for DC and telecommunication facilities (TF) operations. A key aspect of MMT technology is integration of modeling tools to understand how changes in one operational parameter affect the overall DC response. It is demonstrated that reduced ordered models for DC can generate, in less than 2 seconds computational time, a three dimensional thermal model in a 50 kft{sup 2} DC. This rapid modeling enables real time visualization of the DC conditions and enables 'what if' scenarios simulations to characterize response to 'disturbances'. One such example is thermal zone modeling that matches the cooling power to the heat generated at a local level by identifying DC zones cooled by a specific CRAC. Turning off a CRAC unit can be simulated to understand how the other CRAC utilization changes and how server temperature responds

User-centered virtual environment design for virtual rehabilitation

Directory of Open Access Journals (Sweden)

Rizzo Albert A

2010-02-01

Full Text Available Abstract Background As physical and cognitive rehabilitation protocols utilizing virtual environments transition from single applications to comprehensive rehabilitation programs there is a need for a new design cycle methodology. Current human-computer interaction designs focus on usability without benchmarking technology within a user-in-the-loop design cycle. The field of virtual rehabilitation is unique in that determining the efficacy of this genre of computer-aided therapies requires prior knowledge of technology issues that may confound patient outcome measures. Benchmarking the technology (e.g., displays or data gloves using healthy controls may provide a means of characterizing the "normal" performance range of the virtual rehabilitation system. This standard not only allows therapists to select appropriate technology for use with their patient populations, it also allows them to account for technology limitations when assessing treatment efficacy. Methods An overview of the proposed user-centered design cycle is given. Comparisons of two optical see-through head-worn displays provide an example of benchmarking techniques. Benchmarks were obtained using a novel vision test capable of measuring a user's stereoacuity while wearing different types of head-worn displays. Results from healthy participants who performed both virtual and real-world versions of the stereoacuity test are discussed with respect to virtual rehabilitation design. Results The user-centered design cycle argues for benchmarking to precede virtual environment construction, especially for therapeutic applications. Results from real-world testing illustrate the general limitations in stereoacuity attained when viewing content using a head-worn display. Further, the stereoacuity vision benchmark test highlights differences in user performance when utilizing a similar style of head-worn display. These results support the need for including benchmarks as a means of better

User-centered virtual environment design for virtual rehabilitation.

Science.gov (United States)

Fidopiastis, Cali M; Rizzo, Albert A; Rolland, Jannick P

2010-02-19

As physical and cognitive rehabilitation protocols utilizing virtual environments transition from single applications to comprehensive rehabilitation programs there is a need for a new design cycle methodology. Current human-computer interaction designs focus on usability without benchmarking technology within a user-in-the-loop design cycle. The field of virtual rehabilitation is unique in that determining the efficacy of this genre of computer-aided therapies requires prior knowledge of technology issues that may confound patient outcome measures. Benchmarking the technology (e.g., displays or data gloves) using healthy controls may provide a means of characterizing the "normal" performance range of the virtual rehabilitation system. This standard not only allows therapists to select appropriate technology for use with their patient populations, it also allows them to account for technology limitations when assessing treatment efficacy. An overview of the proposed user-centered design cycle is given. Comparisons of two optical see-through head-worn displays provide an example of benchmarking techniques. Benchmarks were obtained using a novel vision test capable of measuring a user's stereoacuity while wearing different types of head-worn displays. Results from healthy participants who performed both virtual and real-world versions of the stereoacuity test are discussed with respect to virtual rehabilitation design. The user-centered design cycle argues for benchmarking to precede virtual environment construction, especially for therapeutic applications. Results from real-world testing illustrate the general limitations in stereoacuity attained when viewing content using a head-worn display. Further, the stereoacuity vision benchmark test highlights differences in user performance when utilizing a similar style of head-worn display. These results support the need for including benchmarks as a means of better understanding user outcomes, especially for patient

Academic medical center libraries on the Web.

Science.gov (United States)

Tannery, N H; Wessel, C B

1998-10-01

Academic medical center libraries are moving towards publishing electronically, utilizing networked technologies, and creating digital libraries. The catalyst for this movement has been the Web. An analysis of academic medical center library Web pages was undertaken to assess the information created and communicated in early 1997. A summary of present uses and suggestions for future applications is provided. A method for evaluating and describing the content of library Web sites was designed. The evaluation included categorizing basic information such as description and access to library services, access to commercial databases, and use of interactive forms. The main goal of the evaluation was to assess original resources produced by these libraries.

NASA Office of Small and Disadvantaged Business Utilization

Science.gov (United States)

2001-01-01

The Office of Small and Disadvantaged Business Utilization (OSDBU) within NASA promotes the utilization of small, disadvantaged, and women-owned small businesses in compliance with Federal laws, regulations, and policies. We assist such firms in obtaining contracts and subcontracts with NASA and its prime contractors. The OSDBU also facilitates the participation of small businesses in NASA's technology transfer and commercialization activities. Our driving philosophy is to consider small businesses as our products. Our customers are the NASA Enterprises, Field Centers, Functional Staff Offices, major prime contractors, and other large institutions. We hone the skills of our products to make them marketable to our customers in the performance of NASA missions.

A Systems Approach to Information Technology (IT) Infrastructure Design for Utility Management Automation Systems

OpenAIRE

A. Fereidunian; H. Lesani; C. Lucas; M. Lehtonen; M. M. Nordman

2006-01-01

Almost all of electric utility companies are planning to improve their management automation system, in order to meet the changing requirements of new liberalized energy market and to benefit from the innovations in information and communication technology (ICT or IT). Architectural design of the utility management automation (UMA) systems for their IT-enabling requires proper selection of IT choices for UMA system, which leads to multi-criteria decision-makings (MCDM). In resp...

The present situations and perspectives on utilization of research reactors in Thailand

Science.gov (United States)

Chongkum, Somporn

2002-01-01

The Thai Research Reactor 1/Modification 1, a TRIGA Mark III reactor, went critical on November 7, 1977. It has been playing a central role in the development of both Office of Atomic Energy for Peace (OAEP) and nuclear application in Thailand. It has a maximum power of 2 MW (thermal) at steady state and a pulsing capacity of 2000 MW. The highest thermal neutron flux at a central thimber is 1×10 13 n/cm 2/s, which is extensively utilized for radioisotope production, neutron activation analysis and neutron beam experiments, i.e. neutron scattering, prompt gamma analysis and neutron radiography. Following the nuclear technological development, the OAEP is in the process of establishing the Ongkharak Nuclear Research Center (ONRC). The center is being built in Nakhon Nayok province, 60 km northeast of Bangkok. The centerpiece of the ONRC is a multipurpose 10 MW TRIGA research reactor. Facilities are included for the production of radioisotopes for medicine, industry and agriculture, neutron transmutation doping of silicon, and neutron capture therapy. The neutron beam facilities will also be utilized for applied research and technology development as well as training in reactor operations, performance of experiments and reactor physics. This paper describes a recent program of utilization as well as a new research reactor for enlarging the perspectives of its utilization in the future.

The Emirates Mars Mission Science Data Center

Science.gov (United States)

Craft, J.; Al Hammadi, O.; DeWolfe, A. W.; Staley, B.; Schafer, C.; Pankratz, C. K.

2017-12-01

The Emirates Mars Mission (EMM), led by the Mohammed Bin Rashid Space Center (MBRSC) in Dubai, United Arab Emirates, is expected to arrive at Mars in January 2021. The EMM Science Data Center (SDC) is to be developed as a joint effort between MBRSC and the University of Colorado's Laboratory for Atmospheric and Space Physics (LASP). The EMM SDC is responsible for the production, management, distribution, and archiving of science data collected from the three instruments on board the Hope spacecraft.With the respective SDC teams on opposite sides of the world evolutionary techniques and cloud-based technologies are being utilized in the development of the EMM SDC. This presentation will provide a top down view of the EMM SDC, summarizing the cloud-based technologies being implemented in the design, as well as the tools, best practices, and lessons learned for software development and management in a geographically distributed team.

A proposal for improving data center management through strategic implementation of Server virtualization technology to support Malaysian Nuclear Agency's activities

International Nuclear Information System (INIS)

Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Raja Murzaferi Raja Moktar; Saaidi Ismail

2010-01-01

Management of servers in Nuclear Malaysia's data center poses a big challenge to IT Center as well as to the general management. Traditional server management techniques have been used to provide reliable and continuous support for the ever increasing services and applications demanded by researchers and the other staffs of Nuclear Malaysia. Data centers are cost centers which need logistical support such as electricity, air conditioning, room space, manpower and other resources. To save cost and comply with Green Technology while maintaining or improving the level of services, a new concept called server virtualization is proposed and a feasibility study of this technology has been initiated to explore its potential to accommodate IT centers ever demanding services while reducing the need for such logistical supports, hence adhering to the Green IT concept. Server virtualization is a new technology where a single high performance physical server can host multiple high processing services, and different types operating systems with different hardware and software requirements which are traditionally performed by multiple server machines. This paper briefly explains server virtualization concepts, tools and techniques and proposes an implementation strategy of the technology for Nuclear Malaysia's data center. (author)

National Wind Technology Center sitewide, Golden, CO: Environmental assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

National Wind Technology Center sitewide, Golden, CO: Environmental assessment

International Nuclear Information System (INIS)

1996-11-01

The National Renewable Energy Laboratory (NREL), the nation's primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate

Report on achievements in fiscal 1998. Development of useful substance production technology utilizing gene combination technology; 1998 nendo idenshi kumikae gijutsu wo riyoshita yuyo busshitsu seisan gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In developing a useful substance producing technology utilizing gene combination technology, plants are taken as a kind of useful substance producing arena, wherein useful protein genes of animals are introduced and manifested in the plants. Thereupon, technological development was carried out for the following items with regard to mass production of useful substances that can be utilized industrially, such as cytokine, by means of plant and cell cultivation: 1. Development of a useful substance producing technology utilizing gene combination technology, and 2. Comprehensive surveys and researches. For the technology to obtain and design useful substance producing genes originated from animals, development of a technology to search and acquire useful genes originated from animals, and a design and modification technology for useful genes. For the technology to introduce genes into gene combined plants, creation of plants combined with useful substance producing genes, and development of an introduction technology using plant virus vector. For the technology to produce high-function chemical substances in the gene combined plants, establishment of technologies for mass breeding and activity analysis of gene combined plants and cultivated cells, and for extraction and refinement of useful substances from the gene combined plants. In the comprehensive surveys and researches, technologies were surveyed and items of information were collected inside and outside the country. (NEDO)

Test facilities for radioactive materials transport packages (Transportation Technology Center Inc., Pueblo, Colorado, USA)

International Nuclear Information System (INIS)

Conlon, P.C.L.

2001-01-01

Transportation Technology Center, Inc. is capable of conducting tests on rail vehicle systems designed for transporting radioactive materials including low level waste debris, transuranic waste, and spent nuclear fuel and high level waste. Services include rail vehicle dynamics modelling, on-track performance testing, full scale structural fatigue testing, rail vehicle impact tests, engineering design and technology consulting, and emergency response training. (author)

A regional technology transfer program. [North Carolina Industrial Applications Center for the Southeast

Science.gov (United States)

1979-01-01

The proliferation of online searching capabilities among its industrial clients, changes in marketing staff and direction, use of Dun and Bradstreet marketing service files, growth of the Annual Service Package program, and services delivered to clients at the NASA funded North Carolina Science and Technology Research Center are described. The library search service was reactivated and enlarged, and a survey was conducted on the NC/STRC Technical Bulletin's effectiveness. Several quotations from clients assess the overall value of the Center's services.

Barriers to utilization of childbirth services of a rural birthing center in Nepal: A qualitative study.

Directory of Open Access Journals (Sweden)

Resham Bahadur Khatri

Full Text Available Maternal mortality and morbidity are public health problems in Nepal. In rural communities, many women give birth at home without the support of a skilled birth attendant, despite the existence of rural birthing centers. The aim of this study was to explore the barriers and provide pragmatic recommendations for better service delivery and use of rural birthing centers.We conducted 26 in-depth interviews with service users and providers, and three focus group discussions with community key informants in a rural community of Rukum district. We used the Adithya Cattamanchi logic model as a guiding framework for data analysis.Irregular and poor quality services, inadequate human and capital resources, and poor governance were health system challenges which prevented service delivery. Contextual barriers including difficult geography, poor birth preparedness practices, harmful culture practices and traditions and low level of trust were also found to contribute to underutilization of the birthing center.The rural birthing center was not providing quality services when women were in need, which meant women did not use the available services properly because of systematic and contextual barriers. Approaches such as awareness-raising activities, local resource mobilization, ensuring access to skilled providers and equipment and other long-term infrastructure development works could improve the quality and utilization of childbirth services in the rural birthing center. This has resonance for other centers in Nepal and similar countries.

Barriers to utilization of childbirth services of a rural birthing center in Nepal: A qualitative study.

Science.gov (United States)

Khatri, Resham Bahadur; Dangi, Tara Prasad; Gautam, Rupesh; Shrestha, Khadka Narayan; Homer, Caroline S E

2017-01-01

Maternal mortality and morbidity are public health problems in Nepal. In rural communities, many women give birth at home without the support of a skilled birth attendant, despite the existence of rural birthing centers. The aim of this study was to explore the barriers and provide pragmatic recommendations for better service delivery and use of rural birthing centers. We conducted 26 in-depth interviews with service users and providers, and three focus group discussions with community key informants in a rural community of Rukum district. We used the Adithya Cattamanchi logic model as a guiding framework for data analysis. Irregular and poor quality services, inadequate human and capital resources, and poor governance were health system challenges which prevented service delivery. Contextual barriers including difficult geography, poor birth preparedness practices, harmful culture practices and traditions and low level of trust were also found to contribute to underutilization of the birthing center. The rural birthing center was not providing quality services when women were in need, which meant women did not use the available services properly because of systematic and contextual barriers. Approaches such as awareness-raising activities, local resource mobilization, ensuring access to skilled providers and equipment and other long-term infrastructure development works could improve the quality and utilization of childbirth services in the rural birthing center. This has resonance for other centers in Nepal and similar countries.

Proceedings of the 2nd symposium on valves for coal conversion and utilization

Energy Technology Data Exchange (ETDEWEB)

Maxfield, D.A. (ed.)

1981-01-01

The 2nd symposium on valves for coal conversion and utilization was held October 15 to 17, 1980. It was sponsored by the US Department of Energy, Morgantown Energy Technology Center, in cooperation with the Valve Manufacturers Association. Seventeen papers have been entered individually into EDB and ERA. (LTN)

From Natural Monopoly to Public Utility: Technological Determinism and the Political Economy of Infrastructure in Progressive-Era America.

Science.gov (United States)

Plaiss, Adam

In present-day debates regarding telecommunication policy, one frequently hears the terms natural monopoly and public utility. This article investigates the origins of these ideas, finding that Richard T. Ely-a celebrated American economist of the late nineteenth century-embedded in the term "natural monopoly" a narrative of technological determinism. By arguing that certain services had monopolizing tendencies hardwired into them, Ely argued for their regulation. Ely's theory of natural monopoly formed the basis of Wisconsin's 1907 public utilities law, which served as a model for many other states' regulatory policies. The modern notion of public utility thus carries with it the technological determinism of Ely's natural monopoly idea. By tracing the lineage of these two terms, this article recaptures the influence that activists and progressive politicians exercised over the formation of large technological systems during the Second Industrial Revolution.

Fleet Readiness Center - Southeast Technology Development Program (Cadmium & Hexavalent Chromium Reduction)

Science.gov (United States)

2014-11-01

Fleet Readiness Center - Southeast TECHNOLOGY DEVELOPMENT PROGRAM (Cadmium & Hexavalent Chromium Reduction) Jack Benfer Senior Materials...Development Program (Cadmium & Hexavalent Chromium Reduction) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...Rinse Black Oxide Rinse CRES Passivation Chrome Plating Cadmium Plating Cadmium Brush Plating Class N (TRL 9) Class N (TRL 7) Class N (TRL 6

Computer Technology for Industry

Science.gov (United States)

1979-01-01

In this age of the computer, more and more business firms are automating their operations for increased efficiency in a great variety of jobs, from simple accounting to managing inventories, from precise machining to analyzing complex structures. In the interest of national productivity, NASA is providing assistance both to longtime computer users and newcomers to automated operations. Through a special technology utilization service, NASA saves industry time and money by making available already developed computer programs which have secondary utility. A computer program is essentially a set of instructions which tells the computer how to produce desired information or effect by drawing upon its stored input. Developing a new program from scratch can be costly and time-consuming. Very often, however, a program developed for one purpose can readily be adapted to a totally different application. To help industry take advantage of existing computer technology, NASA operates the Computer Software Management and Information Center (COSMIC)(registered TradeMark),located at the University of Georgia. COSMIC maintains a large library of computer programs developed for NASA, the Department of Defense, the Department of Energy and other technology-generating agencies of the government. The Center gets a continual flow of software packages, screens them for adaptability to private sector usage, stores them and informs potential customers of their availability.

The project of Esfahan Nuclear Technology Center (ENTEC) and the transfer of nuclear tecnology in Iran

International Nuclear Information System (INIS)

Khazaneh, Reza

1977-01-01

In 1974, the Atomic Energy Organization of Iran (AEOI) decided to set up a Nuclear Technology Center on Esfahan (ENTEC) in collaboration with France's Technicatome Company and the CEA. This center is scheduled to go into operation during 1976-1980. The purposes for setting up ENTEC are threefold: a. to give scientific and technical support to the operation of nuclear power plants and nuclear industries in Iran. b. to carry out research and development in the area of nuclear technology on an industrial level. c. to give supplementary education and training to the manpower needs for the AEOI. To carry out the program of technology transfer, temporary laboratories have been set up in Tehran for engineers, technicians and training programs have been organized primarily in France. The ENTEC project will also include a school for education of junior scientists and engineers in the field of nuclear technology

[Technology: training centers--a new method for learning surgery in visceral surgery].

Science.gov (United States)

Troidl, H

1996-01-01

The importance of training centers can be best described after first answering a few questions like: 1. What kind of surgery will we deal with in the future? 2. What kind of surgeon do we need for this surgery, if it is basically different? 3. How will this surgeon have to be educated/trained for this different surgery? Although I am aware of the fact, that statements about future prospects are usually doomed to fail, I maintain that endoscopic surgery will be an essential part of general surgery. If this is so, surgery will be dominated by extremely complicated technology, new techniques and new instruments. It will be a "different" surgery. It will offer more comfort at the same safety. The surgeon of the future will still need a certain personality; he will still need intuition and creativity. To survive in our society, he will have to be an organiser and even a businessman. Additionally, something new has to be added: he will have to understand modern, complicated technology and will have to use totally different instruments for curing surgical illness. This makes it clear that we will need a different education/training and may be even a different selection of surgeons. We should learn from other professions sharing common interests with surgery, for example, sports where the common interest is achieving most complicated motions and necessarily highly differentiated coordination. Common interest with airline pilots is the target of achieving absolute security. They have a highly differentiated selection and training concept. Training centers may be-under certain prerequisites-a true alternative for this necessary form of training. They must have a concept, i.e. contents and aims have to be defined, structured and oriented on the requirements of surgery for the patient. Responsibility for the concept, performance and control can only be in the hands of Surgical Societies and Universities. These prerequisites correspond most likely to training centers being

Implementing Reliability Centered Maintenance (RCM) with State of the Art PT&I Technologies

Science.gov (United States)

Hollis, Sean; Sasser, Chase

2016-01-01

Building on the work that was started two decades ago, Jacobs Space Operations Group has utilized state of the art PTI technologies to assess the current condition of the assets they manage under the Test and Operations Support Contract (TOSC). Specifically, the Asset Management department leveraged the benefits of ultrasound technology to quantify a motor issue in the Liquid Oxygen Storage Area, and troubleshoot the sources prior to loading the tank to perform Verification and Validation (VV) activities. This technology was efficient, easy to implement, and provided system engineers with data on a possible source of the problem. In situations where legacy motors are exhibiting unexpected noises, it may seem easier to remove and refurbish the motor and replace the bearings because that solution resolves most of the common causes of the noise. However, that solution would have involved additional spending and may not have solved issues stemming from the foundation, if those existed. By utilizing the ultrasound equipment provided by UE Systems, the sound profiles allowed Jacobs TOSC team to determine that the issue resembled a faulty bearing. After replacing the bearing, the unexpected noise ceased.

The Research Results of Radioactive Waste Management Technology Center Year 1997/1998

International Nuclear Information System (INIS)

1998-12-01

The research results of Radioactive Waste Management Technology Center, National Atomic Energy Agency of Indonesia year 1997/1998 contain paper as form of research results on radioactive waste management related fields. There were included many aspects such as radioactive waste processing, storage, decontamination, decommissioning, safety and environmental aspects. There are 26 papers indexed individually (ID)

Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices

Science.gov (United States)

Munday, Jeremy

2016-01-01

Solar sails offer an opportunity for a CubeSatscale, propellant-free spacecraft technology that enables long-term and long-distance missions not possible with traditional methods. Solar sails operate using the transfer of linear momentum from photons of sunlight reflected from the surface of the sail. To propel the spacecraft, no mechanically moving parts, thrusters, or propellant are needed. However, attitude control, or orientation, is still performed using traditional methods involving reaction wheels and propellant ejection, which severely limit mission lifetime. For example, the current state of the art solutions employed by upcoming missions couple solar sails with a state of the art propellant ejection gas system. Here, the use of the gas thruster has limited the lifetime of the mission. To solve the limited mission lifetime problem, the Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices project team is working on propellantless attitude control using thin layers of material, an optical film, electrically switchable from transparent to reflective. The technology is based on a polymer-dispersed liquid crystal (PDLC), which allows this switch upon application of a voltage. This technology removes the need for propellant, which reduces weight and cost while improving performance and lifetime.

Acceptance and Utilization of Technology (UTAUT) as a Method of Technology Acceptance Model of Mitigation Disaster Website

Science.gov (United States)

Siswanto, T.; Shofiati, R.; Hartini, H.

2018-01-01

www.mitigasi-bencana.com as a knowledge management website created based on survey results in April-July 2014 in East Java and Central Java provinces, indicates a gap between the expectations and reality that exist in the services provided by the regional disaster management agency. Based on condition analysis, the gaps that occur can be reduced if the community has the understanding and knowledge of adequate disaster mitigation. The problem that arises later is whether the chosen technology solution is appropriate and acceptable to the public? The methodology used in this study using the Technology Acceptance Model development is the Unified Theory of Acceptance and Utilization of Technology (UTAUT). Feedback obtained from respondents KarangTaruna youth SelogedongBantul, www.mitigasi-bencana.com can be accepted by the respondents, but from processed data is obtained only UTAUT hypotheses on the relationship dimension eligible for Social Expectancy on the Attitude toward technology, which means the higher the perception of the Social Expectancy, the higher the perception of the Attitude toward technology. Because www.mitigasi-bencana.com is new socialized so that society still need time to explore content information and knowledge contained therein. To be accepted by user, a knowledge management application must prepare various aspects of Performance Expectancy, Effort Expectancy, Social Factors, Facilitating Conditions and Attitude.

Systems analysis support to the waste management technology center

International Nuclear Information System (INIS)

Rivera, A.L.; Osborne-Lee, I.W.; DePaoli, S.M.

1988-01-01

This paper describes a systems analysis concept being developed in support of waste management planning and analysis activities for Martin Marietta Energy Systems, Inc. (Energy Systems), sites. This integrated systems model serves as a focus for the accumulation and documentation of technical and economic information from current waste management practices, improved operations projects, remedial actions, and new system development activities. The approach is generic and could be applied to a larger group of sites. This integrated model is a source of technical support to waste management groups in the Energy Systems complex for integrated waste management planning and related technology assessment activities. This problem-solving methodology for low-level waste (LLW) management is being developed through the Waste Management Technology Center (WMTC) for the Low-Level Waste Disposal, Development, and Demonstration (LLWDDD) Program. In support of long-range planning activities, this capability will include the development of management support tools such as specialized systems models, data bases, and information systems. These management support tools will provide continuing support in the identification and definition of technical and economic uncertainties to be addressed by technology demonstration programs. Technical planning activities and current efforts in the development of this system analysis capability for the LLWDDD Program are presented in this paper

Barriers to utilization of childbirth services of a rural birthing center in Nepal: A qualitative study

Science.gov (United States)

Shrestha, Khadka Narayan; Homer, Caroline S. E.

2017-01-01

Background Maternal mortality and morbidity are public health problems in Nepal. In rural communities, many women give birth at home without the support of a skilled birth attendant, despite the existence of rural birthing centers. The aim of this study was to explore the barriers and provide pragmatic recommendations for better service delivery and use of rural birthing centers. Methods We conducted 26 in-depth interviews with service users and providers, and three focus group discussions with community key informants in a rural community of Rukum district. We used the Adithya Cattamanchi logic model as a guiding framework for data analysis. Results Irregular and poor quality services, inadequate human and capital resources, and poor governance were health system challenges which prevented service delivery. Contextual barriers including difficult geography, poor birth preparedness practices, harmful culture practices and traditions and low level of trust were also found to contribute to underutilization of the birthing center. Conclusion The rural birthing center was not providing quality services when women were in need, which meant women did not use the available services properly because of systematic and contextual barriers. Approaches such as awareness-raising activities, local resource mobilization, ensuring access to skilled providers and equipment and other long-term infrastructure development works could improve the quality and utilization of childbirth services in the rural birthing center. This has resonance for other centers in Nepal and similar countries. PMID:28493987

Semi-annual report of Nuclear Technology and Development Center (CDTN) - July to December 1988

International Nuclear Information System (INIS)

1989-01-01

The main activities developed by the several divisions of Nuclear Technology Development Center (CDTN) are described, including areas of reactor tecnologies, fuel cycle, materials and component, nuclear safety and tecnical substructure. (C.G.C.) [pt

Animation company "Fast Forwards" production with HP Utility Data Center; film built using Adaptive Enterprise framework enabled by shared, virtual resource

CERN Multimedia

2003-01-01

Hewlett Packard have produced a commercial-quality animated film using an experimental rendering service from HP Labs and running on an HP Utility Data Center (UDC). The project demonstrates how computing resources can be managed virtually and illustrates the value of utility computing, in which an end-user taps into a large pool of virtual resources, but pays only for what is used (1 page).

Examining Health Information Technology Implementations: Case of the Patient-Centered Medical Home

Science.gov (United States)

Behkami, Nima A.

2012-01-01

It has been shown that the use of Health Information Technology (HIT) is associated with reduced cost and increased quality of care. This dissertation examined the use of registries in Patient Centered Medical Home (PCMH) practices. A survey questionnaire was sent to a nationwide group of clinics certified for being a PCMH. They were asked to…

Solid State Technology Branch of NASA Lewis Research Center: Fifth Annual Digest

International Nuclear Information System (INIS)

1993-08-01

The digest is a collection of papers written by the members of the Solid State Technology Branch of NASA Lewis Research Center from June 1992-June 1993. The papers cover a range of topics relating to superconductivity, monolithic microwave integrated circuits (MMIC's), coplanar waveguide, and material characterization. Individual papers are abstracted separately on the data base

The Research Results of Radioactive Waste Management Technology Center Year 1996/1997

International Nuclear Information System (INIS)

Budiman, P.; Martono, H.; Las, T.; Lubis, E.; Mulyanto; Wisnubroto, D. S.; Sucipta

1997-12-01

The research results of Radioactive Waste Management Technology Center, National Atomic Energy Agency of Indonesia year 1996/1997 contain paper as form of research results on radioactive waste management related fields. There were included many aspects such as radioactive waste processing, storage, decontamination, decommissioning, safety and environmental aspects. There are 24 papers and 12 short communications indexed individually(ID)

The National Space Science and Technology Center's Education and Public Outreach Program

Science.gov (United States)

Cox, G. N.; Denson, R. L.

2004-12-01

The objective of the National Space Science and Technology Center's (NSSTC) Education and Public Outreach program (EPO) is to support K-20 education by coalescing academic, government, and business constituents awareness, implementing best business/education practices, and providing stewardship over funds and programs that promote a symbiotic relationship among these entities, specifically in the area of K-20 Science, Technology, Engineering, and Mathematics (STEM) education. NSSTC EPO Program's long-term objective is to showcase its effective community-based integrated stakeholder model in support of STEM education and to expand its influence across the Southeast region for scaling ultimately across the United States. The Education and Public Outreach program (EPO) is coordinated by a supporting arm of the NSSTC Administrative Council called the EPO Council (EPOC). The EPOC is funded through federal, state, and private grants, donations, and in-kind contributions. It is comprised of representatives of NSSTC Research Centers, both educators and scientists from the Alabama Space Science and Technology Alliance (SSTA) member institutions, the Alabama Space Grant Consortium and the NASA Marshall Space Flight Center's (MSFC) Education Office. Through its affiliation with MSFC and the SSTA - a consortium of Alabama's research universities that comprise the NSSTC, EPO fosters the education and development of the next generation of Alabama scientists and engineers by coordinating activities at the K-20 level in cooperation with the Alabama Department of Education, the Alabama Commission on Higher Education, and Alabama's businesses and industries. The EPO program's primary objective is to be Alabama's premiere organization in uniting academia, government, and private industry by way of providing its support to the State and Federal Departments of Education involved in systemic STEM education reform, workforce development, and innovative uses of technology. The NSSTC EPO

Optimum cooling of data centers application of risk assessment and mitigation techniques

CERN Document Server

Dai, Jun; Das, Diganta; Pecht, Michael G

2014-01-01

This book provides data center designers and operators with methods by which to assess and mitigate the risks associated with utilization of optimum cooling solutions. The goal is to provide readers with sufficient knowledge to implement measures such as free air cooling or direct liquid immersion cooling properly, or combination of existing and emerging cooling technologies in data centers, base stations, and server farms. This book also: Discusses various telecommunication infrastructures, with an emphasis on data centers and base stations Covers the most commonly known energy and power management techniques, as well as emerging cooling solutions for data centers Describes the risks to the electronic equipment fitted in these installations and the methods of risk mitigation Devotes  a particular focus to an up-to-date review of the emerging cooling methods (such as free air cooling and direct liquid immersion cooling) and tools and best practices for designers, technology developers, installation operators...

Technology requirements to be addressed by the NASA Lewis Research Center Cryogenic Fluid Management Facility program

Science.gov (United States)

Aydelott, J. C.; Rudland, R. S.

1985-01-01

The NASA Lewis Research Center is responsible for the planning and execution of a scientific program which will provide advance in space cryogenic fluid management technology. A number of future space missions were identified that require or could benefit from this technology. These fluid management technology needs were prioritized and a shuttle attached reuseable test bed, the cryogenic fluid management facility (CFMF), is being designed to provide the experimental data necessary for the technology development effort.

Assisted Reproductive Technology in Iran: The First National Report on Centers, 2011

Directory of Open Access Journals (Sweden)

Mehrandokht Abedini

2016-09-01

Full Text Available Background: Due to the worldwide increase in infertility, it is both necessary and important to have assisted reproductive technology (ART registries. In Iran, donation and surrogacy programs are approved by decrees from religious scholars. ART has been used since 1984 in Iran and the first Iranian infant conceived by gamete intra-fallopian transfer (GIFT was born in 1989. This report, however, is the first national report on Iranian ART centers. Materials and Methods: This cross-sectional study, conducted under the supervision of the Iranian Ministry of Health, presented a summary of the numbers and percentages of centers that provided infertility services in Iran, as well as the status of ART in Iran during 2011. Results: A total of 52 centers reported treatment cycles and performed approximately 29000 intrauterine insemination (IUI, in addition to 35000 in vitro fertilization (IVF and intra-cytoplasmic sperm injection (ICSI cycles. Conclusion: Iran has considerable potential to provide IVF services for both Iranians as well as other nationalities throughout the region. This proves the need for a national center that will implement a registry system.

PTC test bed upgrades to provide ACSES testing support capabilities at transportation technology center.

Science.gov (United States)

2015-06-01

FRA Task Order 314 upgraded the Positive Train Control (PTC) Test Bed at the Transportation Technology Center to support : testing of PTC systems, components, and related equipment associated with the Advanced Civil Speed Enforcement System : (ACSES)...

Oklahoma State University proposed Advanced Technology Research Center. Environmental Assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

The Department of Energy (DOE) has prepared an Environmental Assessment (EA) evaluating the construction and equipping of the proposed Advanced Technology Research Center (ATRC) at Oklahoma State University (OSU) in Stillwater, Oklahoma. Based on the analysis in the EA, the DOE has determined that the proposed action does not constitute a major federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement is not required.

ExMC Technology Watch

Science.gov (United States)

Krihak, M.; Barr, Y.; Watkins, S.; Fung, P.; McGrath, T.; Baumann, D.

2012-01-01

The Technology Watch (Tech Watch) project is a NASA endeavor conducted under the Human Research Program's (HRP) Exploration Medical Capability (ExMC) element, and focusing on ExMC technology gaps. The project involves several NASA centers, including the Johnson Space Center (JSC), Glenn Research Center (GRC), Ames Research Center (ARC), and the Langley Research Center (LaRC). The objective of Tech Watch is to identify emerging, high-impact technologies that augment current NASA HRP technology development efforts. Identifying such technologies accelerates the development of medical care and research capabilities for the mitigation of potential health issues encountered during human space exploration missions. The aim of this process is to leverage technologies developed by academia, industry and other government agencies and to identify the effective utilization of NASA resources to maximize the HRP return on investment. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion and further NASA's goal to provide a safe and healthy environment for human exploration. In 2011, the major focus areas for Tech Watch included information dissemination, education outreach and public accessibility to technology gaps and gap reports. The dissemination of information was accomplished through site visits to research laboratories and/or companies, and participation at select conferences where Tech Watch objectives and technology gaps were presented. Presentation of such material provided researchers with insights on NASA ExMC needs for space exploration and an opportunity to discuss potential areas of common interest. The second focus area, education outreach, was accomplished via two mechanisms. First, several senior student projects, each related to an ExMC technology gap, were sponsored by the various NASA centers. These projects presented ExMC related technology problems firsthand to collegiate laboratories

ASSESSMENT OF CONTROL TECHNOLOGIES FOR REDUCING EMISSIONS OF SO2 AND NOX FROM EXISTING COAL-FIRED UTILITY BOILERS

Science.gov (United States)

The report reviews information and estimated costs on 15 emissioncontrol technology categories applicable to existing coal-fired electric utility boilers. he categories include passive controls such as least emission dispatching, conventional processes, and emerging technologies ...

Utilization of microbial lebensraum. Modern developments in biologic technologies

Energy Technology Data Exchange (ETDEWEB)

Praeve, P [Farbwerke Hoechst A.G., Frankfurt am Main (Germany, F.R.)

1977-04-01

Microbiology was in former times nearly exclusively used in the region of food and for the production of antibiotics. Biomass production must be seen as a key development among the new biotechnologies. Biomass consists of high-fat and protein-rich microorganisms, which can serve as animal feed. These microorganisms not only grow on cellulose wastes and other biological basic substrates but also on mineral oil and methanol. The energy consumption is relatively low. The increasing knowledge of the problems of one-way-technologies for our time makes todays biotechnology seem to be a very promising development. Biotechnology utilizes the cyclic metabolic way of the microorganisms and can in many cases lead back waste products to natural circulation.

Robotic Technology Efforts at the NASA/Johnson Space Center

Science.gov (United States)

Diftler, Ron

2017-01-01

The NASA/Johnson Space Center has been developing robotic systems in support of space exploration for more than two decades. The goal of the Center’s Robotic Systems Technology Branch is to design and build hardware and software to assist astronauts in performing their mission. These systems include: rovers, humanoid robots, inspection devices and wearable robotics. Inspection systems provide external views of space vehicles to search for surface damage and also maneuver inside restricted areas to verify proper connections. New concepts in human and robotic rovers offer solutions for navigating difficult terrain expected in future planetary missions. An important objective for humanoid robots is to relieve the crew of “dull, dirty or dangerous” tasks allowing them more time to perform their important science and exploration missions. Wearable robotics one of the Center’s newest development areas can provide crew with low mass exercise capability and also augment an astronaut’s strength while wearing a space suit.This presentation will describe the robotic technology and prototypes developed at the Johnson Space Center that are the basis for future flight systems. An overview of inspection robots will show their operation on the ground and in-orbit. Rovers with independent wheel modules, crab steering, and active suspension are able to climb over large obstacles, and nimbly maneuver around others. Humanoid robots, including the First Humanoid Robot in Space: Robonaut 2, demonstrate capabilities that will lead to robotic caretakers for human habitats in space, and on Mars. The Center’s Wearable Robotics Lab supports work in assistive and sensing devices, including exoskeletons, force measuring shoes, and grasp assist gloves.

Effectiveness and feasibility of utilizing E4D technology as a teaching tool in a preclinical dental education environment.

Science.gov (United States)

Callan, Richard S; Palladino, Christie L; Furness, Alan R; Bundy, Emily L; Ange, Brittany L

2014-10-01

Recent efforts have been directed towards utilizing CAD/CAM technology in the education of future dentists. The purpose of this pilot study was to investigate the feasibility of implementing CAD/CAM technology in instruction on preparing a tooth for restoration. Students at one dental school were assigned access to CAD/CAM technology vs. traditional preparation methods in a randomized, crossover design. In a convenience sample of a second-year class, seventy-six of the seventy-nine students volunteered to participate, for a response rate of 96 percent. Two analyses were performed on this pilot data: a primary effectiveness analysis comparing students' competency exam scores by intervention group (intention-to-treat analysis) and a secondary efficacy analysis comparing competency exam scores among students who reported using CAD/CAM versus those who did not. The effectiveness analysis showed no difference in outcomes by intervention group assignment. While student survey results indicated interest in utilizing the technology, the actual utilization rate was much less than one might anticipate, yielding a sample size that limited statistical power. The secondary analysis demonstrated higher mean competency exam scores for students reporting use of CAD/CAM compared to those who did not use the technology, but these results did not reach statistical significance (p=0.075). Prior research has investigated the efficacy of CAD/CAM in a controlled educational trial, but this study adds to the literature by investigating student use of CAD/CAM in a real-world, self-study fashion. Further studies should investigate ways in which to increase student utilization of CAD/CAM and whether or not increased utilization, with a larger sample size, would yield significant outcomes.

JV Task 126 - Mercury Control Technologies for Electric Utilities Burning Bituminous Coal

Energy Technology Data Exchange (ETDEWEB)

Jason Laumb; John Kay; Michael Jones; Brandon Pavlish; Nicholas Lentz; Donald McCollor; Kevin Galbreath

2009-03-29

The EERC developed an applied research consortium project to test cost-effective mercury (Hg) control technologies for utilities burning bituminous coals. The project goal was to test innovative Hg control technologies that have the potential to reduce Hg emissions from bituminous coal-fired power plants by {ge}90% at costs of one-half to three-quarters of current estimates for activated carbon injection (ACI). Hg control technology evaluations were performed using the EERC's combustion test facility (CTF). The CTF was fired on pulverized bituminous coals at 550,000 Btu/hr (580 MJ/hr). The CTF was configured with the following air pollution control devices (APCDs): selective catalytic reduction (SCR) unit, electrostatic precipitator (ESP), and wet flue gas desulfurization system (WFDS). The Hg control technologies investigated as part of this project included ACI (three Norit Americas, Inc., and eleven Envergex sorbents), elemental mercury (Hg{sup 0}) oxidation catalysts (i.e., the noble metals in Hitachi Zosen, Cormetech, and Hitachi SCR catalysts), sorbent enhancement additives (SEAs) (a proprietary EERC additive, trona, and limestone), and blending with a Powder River Basin (PRB) subbituminous coal. These Hg control technologies were evaluated separately, and many were also tested in combination.

Digital Divide in the Utilization of Information and Communication Technology (ICT) in Counsellor Education in Nigerian Universities

Science.gov (United States)

Eyo, Mfon

2014-01-01

This study investigated digital divide in the utilization of Information and Communication Technology (ICT) in counsellor education in Nigerian universities. It had two research questions and two hypotheses tested at 0.05 level of significance. It adopted a survey design and used ICT Utilization Questionnaire (IUQ) in gathering data from the…

Technologies in the patient-centered medical home: examining the model from an enterprise perspective.

Science.gov (United States)

Hughes, Cortney L; Marshall, Capt Robert; Murphy, Edward; Mun, Seong K

2011-01-01

Fee-for-service reimbursement has fragmented the healthcare system. Providers are paid based on the number of services rendered instead of quality, leading to the cost of care rising at a faster rate than its value. One approach to counter this is the Patient-Centered Medical Home (PCMH), a primary care model that emphasizes team-based medicine, a partnership between patients and providers, and expanded access and communication. The transition to PCMH is facilitated by innovative technologies, such as telemedicine for additional services, electronic medical records to document patients' health needs, and online portals for electronic visits and communication between patients and providers. Implementing these technologies involves tremendous investment of funds and time from practices and healthcare organizations. Although PCMH does not require such technologies, they facilitate its success, as care coordination and population management necessitated by the model are difficult to do without. This article argues that there is a paradox in PCMH and technology is at its center. Although PCMH intends to be cost effective by reducing hospital admissions and ER visits through providing better preventative services, it is actually a financial risk due to the very real upfront costs of implementing and sustaining technologies needed to carry out the intent of the PCMH model, which may not be made up immediately, if ever. This article delves into the rationale behind why payers, providers, and patients have adopted PCMH regardless of this risk and in doing so, maps out the roles that innovative technologies play in the conversion to PCMH.

Charting the Emergence of Corporate Procurement of Utility-Scale PV

Energy Technology Data Exchange (ETDEWEB)

Heeter, Jenny S. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cook, Jeffrey J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bird, Lori A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-07

Corporations and other institutions have contracted for more than 2300 MW of off-site solar, using power purchase agreements, green tariffs, or bilateral deals with utilities. This paper examines the benefits, challenges, and outlooks for large-scale off-site solar purchasing in the United States. Pathways differ based on where they are available, the hedge value they can provide, and their ease of implementation. The paper features case studies of an aggregate PPA (Massachusetts Institute of Technology, Boston Medical Center, and Post Office Square), a corporation exiting their incumbent utility (MGM Resorts), a utility offering large scale renewables to corporate customers (Alabama Powers Renewable Procurement Program), and a company with approval to sell energy into wholesale markets (Google Energy Inc.).

Geothermal direct-heat utilization assistance. Quarterly report, October--December 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

This report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the first quarter of FY-97. It describes 174 contracts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment, economics and resources. Research activities are summarized on greenhouse peaking. Outreach activities include the publication of a geothermal direct use Bulletin, dissemination of information, geothermal library, technical papers and seminars, and progress monitor reports on geothermal resources and utilization.

The Utilization of Urine Processing for the Advancement of Life Support Technologies

Science.gov (United States)

Grossi-Soyster, Elysse; Hogan, John; Flynn, Michael

2014-01-01

The success of long-duration missions will depend on resource recovery and the self-sustainability of life support technologies. Current technologies used on the International Space Station (ISS) utilize chemical and mechanical processes, such as filtration, to recover potable water from urine produced by crewmembers. Such technologies have significantly reduced the need for water resupply through closed-loop resource recovery and recycling. Harvesting the important components of urine requires selectivity, whether through the use of membranes or other physical barriers, or by chemical or biological processes. Given the chemical composition of urine, the downstream benefits of urine processing for resource recovery will be critical for many aspects of life support, such as food production and the synthesis of biofuels. This paper discusses the beneficial components of urine and their potential applications, and the challenges associated with using urine for nutrient recycling for space application.

Technology choice in a least-cost expansion analysis framework

International Nuclear Information System (INIS)

Guziel, K.A.; South, D.W.

1990-01-01

This paper reports that the current outlook for new capacity additions by electric utilities is uncertain and tenuous. Regardless of the amount, it is inevitable that new capacity will be needed in the 1990s and beyond. The fundamental question about the additional capacity requirements centers on technology choice and the factors influencing the decision process. Under current market conditions, utilities have become capital aversive due to rate base disallowances by state regulatory commissions, difficulties in funding long-term capital-intensive projects, uncertainties about future demand, and the ability to purchase power from sources such as independent power producers (IPPs) and cogenerators. Instead of building capital-intensive power plants, utilities have begun relying on natural gas technologies, which permit rapid construction/deployment and low capital investment

Conceptual and empirical themes regarding the design of technology transfer programs : a review of wood utilization research in the United States

Science.gov (United States)

Paul V. Ellefson; Michael A. Kilgore; Kenneth E. Skog; Christopher D. Risbrudt

2011-01-01

Transfer of technologies produced by research is critical to innovation within all organizations. The intent of this paper is to take stock of the conceptual underpinnings of technology transfer processes as they relate to wood utilization research and to identify conditions that promote the successful transfer of research results. Conceptually, research utilization...

A Comparison of Undergraduate Faculty and Millennial Students regarding the Utilization of Weblog and Podcast Technology in a Teacher Education Department

Science.gov (United States)

Ennis, Leslie Sturdivant; Gambrell, Elizabeth Anne

2010-01-01

The main objective of the study was to compare the utilization of weblog and podcast technology by undergraduate university faculty and Millennial college students. The study was conducted to test the hypothesis, formed from existing literature, that there might be a difference in the utilization of weblog and podcast technology between faculty…

Armstrong Flight Research Center Research Technology and Engineering 2017

Science.gov (United States)

Voracek, David F. (Editor)

2018-01-01

I am delighted to present this report of accomplishments at NASA's Armstrong Flight Research Center. Our dedicated innovators possess a wealth of performance, safety, and technical capabilities spanning a wide variety of research areas involving aircraft, electronic sensors, instrumentation, environmental and earth science, celestial observations, and much more. They not only perform tasks necessary to safely and successfully accomplish Armstrong's flight research and test missions but also support NASA missions across the entire Agency. Armstrong's project teams have successfully accomplished many of the nation's most complex flight research projects by crafting creative solutions that advance emerging technologies from concept development and experimental formulation to final testing. We are developing and refining technologies for ultra-efficient aircraft, electric propulsion vehicles, a low boom flight demonstrator, air launch systems, and experimental x-planes, to name a few. Additionally, with our unique location and airborne research laboratories, we are testing and validating new research concepts. Summaries of each project highlighting key results and benefits of the effort are provided in the following pages. Technology areas for the projects include electric propulsion, vehicle efficiency, supersonics, space and hypersonics, autonomous systems, flight and ground experimental test technologies, and much more. Additional technical information is available in the appendix, as well as contact information for the Principal Investigator of each project. I am proud of the work we do here at Armstrong and am pleased to share these details with you. We welcome opportunities for partnership and collaboration, so please contact us to learn more about these cutting-edge innovations and how they might align with your needs.

Grounding the Innovation of Future Technologies

Directory of Open Access Journals (Sweden)

Antti Oulasvirta

2005-01-01

Full Text Available Mobile and ubiquitous technologies can potentially change the role of information and communication technology in human lives. Empirical, human-centered approaches are emerging as an alternative to technology-driven approaches in the innovation of these technologies. Three necessary empirical stages, intertwined with analytical ones and with each informing and grounding the succeeding stages, are analyzed. First, needfinding is utilized to discover societal and individual demands for technology. Second, observational and experimental studies examine the social and cognitive preconditions for interaction. From these two steps, a hypothesis is formulated regarding how technology will change existing practices. Finally, this hypothesis, embodied in the design of a prototype, is tested in a field trial. Four design cases illustrate the value of empirical grounding.

High-performance flat data center network architecture based on scalable and flow-controlled optical switching system

NARCIS (Netherlands)

Calabretta, N.; Miao, W.; Dorren, H.J.S.; Schroder, H.; Chen, R.T.

2016-01-01

Traffic in data centers networks (DCNs) is steadily growing to support various applications and virtualization technologies. Multi-tenancy enabling efficient resource utilization is considered as a key requirement for the next generation DCs resulting from the growing demands for services and

Resource utilization during software development

Science.gov (United States)

Zelkowitz, Marvin V.

1988-01-01

This paper discusses resource utilization over the life cycle of software development and discusses the role that the current 'waterfall' model plays in the actual software life cycle. Software production in the NASA environment was analyzed to measure these differences. The data from 13 different projects were collected by the Software Engineering Laboratory at NASA Goddard Space Flight Center and analyzed for similarities and differences. The results indicate that the waterfall model is not very realistic in practice, and that as technology introduces further perturbations to this model with concepts like executable specifications, rapid prototyping, and wide-spectrum languages, we need to modify our model of this process.

Establishing and evaluating bar-code technology in blood sampling system: a model based on human centered human-centered design method.

Science.gov (United States)

Chou, Shin-Shang; Yan, Hsiu-Fang; Huang, Hsiu-Ya; Tseng, Kuan-Jui; Kuo, Shu-Chen

2012-01-01

This study intended to use a human-centered design study method to develop a bar-code technology in blood sampling process. By using the multilevel analysis to gather the information, the bar-code technology has been constructed to identify the patient's identification, simplify the work process, and prevent medical error rates. A Technology Acceptance Model questionnaire was developed to assess the effectiveness of system and the data of patient's identification and sample errors were collected daily. The average scores of 8 items users' perceived ease of use was 25.21(3.72), 9 items users' perceived usefulness was 28.53(5.00), and 14 items task-technology fit was 52.24(7.09), the rate of patient identification error and samples with order cancelled were down to zero, however, new errors were generated after the new system deployed; which were the position of barcode stickers on the sample tubes. Overall, more than half of nurses (62.5%) were willing to use the new system.

76 FR 59166 - Navistar Truck Development and Technology Center, a Subsidiary of Navistar International...

Science.gov (United States)

2011-09-23

... Development and Technology Center, a Subsidiary of Navistar International Corporation Truck Division, Fort... International Corporation, Truck Division, Fort Wayne, Indiana (subject firm). The negative determination was... is a headcount reduction across the nation, made possible by the Global Outsourcing. * * * '' The...

Expanding technology in the ICU: the case for the utilization of telemedicine.

Science.gov (United States)

Deslich, Stacie; Coustasse, Alberto

2014-05-01

Telemedicine has been utilized in various healthcare areas to achieve better patient outcomes, lower costs of providing services, and increase patient access to care. Tele-intensive care unit (ICU) technology has been introduced as a way to provide effective ICU services to patients with reduced access, as well as to decrease costs and improve patient care. The methodology for this qualitative study was a literature search and review of case studies. The search was limited to sources published in the last 10 years (2003-2013) in the English language. In total, 55 references were used for this research exploration inquiry. Tele-ICU was found to be an effective way to use technology to decrease costs of providing intensive care, while improving patient outcomes such as mortality and length of stay. Several case studies supported the use of telemedicine in ICUs to provide intensive care to patients who lived in rural areas and lacked access to traditional ICUs. Furthermore, it was noted that, although the initial costs for tele-ICU startup were significant, as much as $100,000 per bed, the benefits of the utilization of this technology can offset those costs by reducing costs by 24% via decreased length of stay for patients. The findings of this study have suggested that the implementation of tele-ICU may have been more beneficial than costly, and it may have provided healthcare organizations the opportunity to increase quality of care and decrease mortality, while it might have decreased costs of delivering ICU services in both rural and urban areas.

Search Technologies | NCI Technology Transfer Center | TTC

Science.gov (United States)

Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

Available Technologies | NCI Technology Transfer Center | TTC

Science.gov (United States)

Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

Electric Power Research Institute: Environmental Control Technology Center: Report to the Steering Committee, March 1996. Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued this month with the Carbon Injection System for the Hazardous Air Pollutant (HAP) test block. With this testing, the mercury measurement (Method 29) studies also continued with various impinger capture solutions. Also, the installation of the B&W/CHX Heat Exchanger unit was completed in March. The 4.0 MW Spray Dryer Absorber System (Carbon Injection System) and the 4.0 MW Pilot Wet FGD Unit and were utilized in the HAP test configuration this month. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit remained idle this month in a cold- standby mode. Monthly inspections were conducted for all equipment in cold-standby, as well as for the fire safety systems, and will continue to be conducted by the ECTC Operations and Maintenance staff.

Utilization of Dental Services in Public Health Center: Dental Attendance, Awareness and Felt Needs.

Science.gov (United States)

Pewa, Preksha; Garla, Bharath K; Dagli, Rushabh; Bhateja, Geetika Arora; Solanki, Jitendra

2015-10-01

In rural India, dental diseases occur due to many factors, which includes inadequate or improper use of fluoride and a lack of knowledge regarding oral health and oral hygiene, which prevent proper screening and dental care of oral diseases. The objective of the study was to evaluate the dental attendance, awareness and utilization of dental services in public health center. A cross-sectional study was conducted among 251 study subjects who were visiting dental outpatient department (OPD) of public health centre (PHC), Guda Bishnoi, and Jodhpur using a pretested proforma from month of July 2014 to October 2014. A pretested questionnaire was used to collect the data regarding socioeconomic status and demographic factors affecting the utilization of dental services. Pearson's Chi-square test and step-wise logistic regression were applied for the analysis. Statistically significant results were found in relation to age, educational status, socioeconomic status and gender with dental attendance, dental awareness and felt needs. p-value dental services, thereby increasing the oral health status of the population.

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-01-31

FIU-HCET participated in an ICT meeting at Mound during the second week of December and presented a brief videotape of the testing of the Robotic Climber technology. During this meeting, FIU-HCET proposed the TechXtract technology for possible testing at Mound and agreed to develop a five-page proposal for review by team members. FIU-HCET provided assistance to Bartlett Inc. and General Lasertronics Corporation in developing a proposal for a Program Opportunity Notice (PON). The proposal was submitted by these companies on January 5, 1999. The search for new equipment dismantlement technologies is continuing. The following vendors have responded to requests for demonstration: LUMONICS, Laser Solutions technology; CRYO-BEAM, Cryogenic cutting technology; Waterjet Technology Association, Waterjet Cutting technology; and DIAJET, Waterjet Cutting technology. Based on the tasks done in FY98, FIU-HCET is working closely with Numatec Hanford Corporation (NHC) and Pacific Northwest National Laboratory (PNNL) to revise the plan and scope of work of the pipeline plugging project in FY99, which involves activities of lab-scale flow loop experiments and a large-scale demonstration test bed.

Integrated design and optimization of technologies for utilizing low grade heat in process industries

International Nuclear Information System (INIS)

Kwak, Dong-Hun; Binns, Michael; Kim, Jin-Kuk

2014-01-01

Highlights: • Implementation of a modeling and design framework for the utilization of low grade heat. • Application of process simulator and optimization techniques for the design of technologies for heat recovery. • Systematic and holistic exploitation for the recovery of industrial low grade heat. • Demonstration of the applicability and benefit of integrated design and optimization framework through a case study. - Abstract: The utilization of low grade heat in process industries has significant potential for improving site-wide energy efficiency. This paper focuses on the techno-economic analysis of key technologies for energy recovery and re-use, namely: Organic Rankine Cycles (ORC), boiler feed water heating, heat pumping and absorption refrigeration in the context of process integration. Process modeling and optimization in a holistic manner identifies the optimal integrated configuration of these technologies, with rigorous assessment of costs and technical feasibility of these technologies. For the systematic screening and evaluation of design options, detailed process simulator models are evaluated and optimization proceeds subject to design constraints for the particular economic scenarios where technology using low grade heat is introduced into the process site. Case studies are presented to illustrate how the proposed modeling and optimization framework can be useful and effective in practice, in terms of providing design guidelines and conceptual insights for the application of technologies using low grade heat. From the case study, the best options during winter are the ORC giving a 6.4% cost reduction for the ideal case with low grade heat available at a fixed temperature and boiler feed water heating giving a 2.5% cost reduction for the realistic case with low grade heat available at a range of temperatures. Similarly during summer boiler feed water heating was found to be the best option giving a 3.1% reduction of costs considering a

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-04-30

The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

Education, Technology, and Media: A Peak into My Summer Internship at NASA Glenn Research Center in Cleveland, Ohio

Science.gov (United States)

Moon, James

2004-01-01

My name is James Moon and I am a senor at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time sohare applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community.

A Health Assessment Survey of Veteran Students: Utilizing a Community College-Veterans Affairs Medical Center Partnership.

Science.gov (United States)

Misra-Hebert, Anita D; Santurri, Laura; DeChant, Richard; Watts, Brook; Sehgal, Ashwini R; Aron, David C

2015-10-01

To assess health status among student veterans at a community college utilizing a partnership between a Veterans Affairs Medical Center and a community college. Student veterans at Cuyahoga Community College in Cleveland, Ohio, in January to April 2013. A health assessment survey was sent to 978 veteran students. Descriptive analyses to assess prevalence of clinical diagnoses and health behaviors were performed. Logistic regression analyses were performed to assess for independent predictors of functional limitations. 204 students participated in the survey (21% response rate). Self-reported depression and unhealthy behaviors were high. Physical and emotional limitations (45% and 35%, respectively), and pain interfering with work (42%) were reported. Logistic regression analyses confirmed the independent association of self-reported depression with functional limitation (odds ratio [OR] = 3.3, 95% confidence interval [CI] 1.4-7.8, p statistic 0.72) and of post-traumatic stress disorder with pain interfering with work (OR 3.9, CI 1.1-13.6, p statistic 0.75). A health assessment survey identified priority areas to inform targeted health promotion for student veterans at a community college. A partnership between a Veterans Affairs Medical Center and a community college can be utilized to help understand the health needs of veteran students. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

Crew-Centered Operations: What HAL 9000 Should Have Been

Science.gov (United States)

Korsmeyer, David J.; Clancy, Daniel J.; Crawford, James M.; Drummond, Mark E.

2005-01-01

To date, manned space flight has maintained the locus of control for the mission on the ground. Mission control performs tasks such as activity planning, system health management, resource allocation, and astronaut health monitoring. Future exploration missions require the locus of control to shift to on-board due light speed constraints and potential loss of communication. The lunar campaign must begin to utilize a shared control approach to validate and understand the limitations of the technology allowing astronauts to oversee and direct aspects of operation that require timely decision making. Crew-centered Operations require a system-level approach that integrates multiple technologies together to allow a crew-prime concept of operations. This paper will provide an overview of the driving mission requirements, highlighting the limitations of existing approaches to mission operations and identifying the critical technologies necessary to enable a crew-centered mode of operations. The paper will focus on the requirements, trade spaces, and concepts for fulfillment of this capability. The paper will provide a broad overview of relevant technologies including: Activity Planning and Scheduling; System Monitoring; Repair and Recovery; Crew Work Practices.

Adopting a Patient-Centered Approach to Primary Outcome Analysis of Acute Stroke Trials by Use of a Utility-Weighted Modified Rankin Scale

Science.gov (United States)

Chaisinanunkul, Napasri; Adeoye, Opeolu; Lewis, Roger J.; Grotta, James C.; Broderick, Joseph; Jovin, Tudor G.; Nogueira, Raul G.; Elm, Jordan; Graves, Todd; Berry, Scott; Lees, Kennedy R.; Barreto, Andrew D.; Saver, Jeffrey L.

2015-01-01

Background and Purpose Although the modified Rankin Scale (mRS) is the most commonly employed primary endpoint in acute stroke trials, its power is limited when analyzed in dichotomized fashion and its indication of effect size challenging to interpret when analyzed ordinally. Weighting the seven Rankin levels by utilities may improve scale interpretability while preserving statistical power. Methods A utility weighted mRS (UW-mRS) was derived by averaging values from time-tradeoff (patient centered) and person-tradeoff (clinician centered) studies. The UW-mRS, standard ordinal mRS, and dichotomized mRS were applied to 11 trials or meta-analyses of acute stroke treatments, including lytic, endovascular reperfusion, blood pressure moderation, and hemicraniectomy interventions. Results Utility values were: mRS 0–1.0; mRS 1 - 0.91; mRS 2 - 0.76; mRS 3 - 0.65; mRS 4 - 0.33; mRS 5 & 6 - 0. For trials with unidirectional treatment effects, the UW-mRS paralleled the ordinal mRS and outperformed dichotomous mRS analyses. Both the UW-mRS and the ordinal mRS were statistically significant in six of eight unidirectional effect trials, while dichotomous analyses were statistically significant in two to four of eight. In bidirectional effect trials, both the UW-mRS and ordinal tests captured the divergent treatment effects by showing neutral results whereas some dichotomized analyses showed positive results. Mean utility differences in trials with statistically significant positive results ranged from 0.026 to 0.249. Conclusion A utility-weighted mRS performs similarly to the standard ordinal mRS in detecting treatment effects in actual stroke trials and ensures the quantitative outcome is a valid reflection of patient-centered benefits. PMID:26138130

Research on fabrication of aspheres at the Center of Optics Technology (University of Applied Science in Aalen); Techical Digest

Science.gov (United States)

Boerret, Rainer; Burger, Jochen; Bich, Andreas; Gall, Christoph; Hellmuth, Thomas

2005-05-01

The Center of Optics Technology at the University of Applied Science, founded in 2003, is part of the School of Optics and Mechatronics. It completes the existing optical engineering department with a full optical fabrication and metrology chain and serves in parallel as a technology transfer center, to provide area industries with the most up-to-date technology in optical fabrication and engineering. Two examples of research work will be presented. The first example is the optimizing of the grinding process for high precision aspheres, the other is generating and polishing of a freeform optical element which is used as a phase plate.

Examining Stakeholder Perceptions of Accessibility and Utilization of Computer and Internet Technology in the Selinsgrove Area School District

Science.gov (United States)

Krause, Lorinda M.

2014-01-01

This study utilized a mixed methods approach to examine the issue of how parents, students, and teachers (stakeholders) perceive accessibility and the utilization of computer and Internet technology within the Selinsgrove, Pennsylvania Area School District. Quantitative data was collected through the use of questionnaires distributed to the…

Skylab medical technology utilization

Science.gov (United States)

Stonesifer, J. C.

1974-01-01

To perform the extensive medical experimentation on man in a long-term, zero-g environment, new medical measuring and monitoring equipment had to be developed, new techniques in training and operations were required, and new methods of collecting and analyzing the great amounts of medical data were developed. Examples of technology transfers to the public sector resulted from the development of new equipment, methods, techniques, and data. This paper describes several of the examples that stemmed directly from Skylab technology.

The role of utilities in enabling technology innovation: The BC hydro alternative & emerging energy strategy

Energy Technology Data Exchange (ETDEWEB)

Tu, Alex; Leclair, Donna; Morrison, Allison

2010-09-15

In order for renewable energy to play a dominant role in the global electricity supply mix, emerging renewable energy technologies - such as wave, tidal, enhanced geothermal, and 3rd generation photovoltaic technologies - must prove their technical merits and achieve cost parity with conventional sources of supply. BC Hydro, a government-owned electric utility, launched an Alternative and Emerging Energy Strategy that describes its role as an enabler of technology innovation. This paper describes BC Hydro's goal, objectives and actions to accelerate the commercialization that will yield a diversity of supply options and a growing, local clean-tech cluster.

Incineration technology for alpha-bearing radioactive waste in Germany

International Nuclear Information System (INIS)

Dirks, Friedlich; Pfeiffer, Reinhard

1997-01-01

Since 1971 the Karlsruhe Research Center has developed and operated plants for the incineration of radioactive waste. Three incineration plants for pure β/γ solid, α-bearing solid and radioactive liquid waste have been successfully utilized during last two decades. Recently more than 20 year-old β/γ plant was shut down with the economic point of view, mainly due to the recently reduced volume of burnable β/γ waste. Burnable β/γ solid waste is now being treated with α-bearing waste in a α solid incineration plant. The status of incineration technology for α-bearing waste and other radioactive waste treatment technologies, which are now utilized in Karlsruhe Research Center, such as conditioning of incineration ash, supercompaction, scrapping, and decontamination of solid radioactive waste, etc. are introduced in this presentation. Additionally, operational results of the recently installed new dioxin adsorber and fluidized-bed drier for scrubber liquid in α incineration plant are also described in this presentation. (author) 1 tab., 13 figs

DEMONSTRATION OF SORBENT INJECTION TECHNOLOGY ON A TANGENTIALLY COAL-FIRED UTILITY BOILER (YORKTOWN LIMB DEMONSTRATION)

Science.gov (United States)

The report summarizes activities conducted and results achieved in an EPA-sponsored program to demonstrate Limestone Injection Multistage Burner (LIMB) technology on a tangentially fired coal-burning utility boiler, Virginia Power's 180-MWe Yorktown Unit No. 2. his successfully d...

TEST DESIGN FOR ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) OF ADD-ON NOX CONTROL UTILIZING OZONE INJECTION

Science.gov (United States)

The paper discusses the test design for environmental technology verification (ETV) of add-0n nitrogen oxides (NOx) control utilizing ozone injection. (NOTE: ETV is an EPA-established program to enhance domestic and international market acceptance of new or improved commercially...

Experiences of CFD simulations at Foster Wheeler Energia Oy`s Karhula R and D center

Energy Technology Data Exchange (ETDEWEB)

Hyppaenen, T. [Foster Wheeler Energia Oy, Karhula (Finland). Karhula R and D Center

1996-12-31

Karhula R and D Center is specialized in the research of solid fuel combustion based on circulating fluidized bed technology. Since the 1970`s, numerical models have been utilized in process development to enhance fundamental understanding of the technology. Both own and commercial computer models have been used. Until now, a special problem in circulating fluidized beds has been the modeling of dense phase multiphase flow, especially for industrial solid-fuel boilers. This has prevented the Karhula R and D Center from using commercial codes, and as a consequence, own modeling approaches have been necessary. This presentation describes some main points of the modeling activities in circulating fluidized bed boilers. (author)

Experiences of CFD simulations at Foster Wheeler Energia Oy`s Karhula R and D center

Energy Technology Data Exchange (ETDEWEB)

Hyppaenen, T [Foster Wheeler Energia Oy, Karhula (Finland). Karhula R and D Center

1997-12-31

Karhula R and D Center is specialized in the research of solid fuel combustion based on circulating fluidized bed technology. Since the 1970`s, numerical models have been utilized in process development to enhance fundamental understanding of the technology. Both own and commercial computer models have been used. Until now, a special problem in circulating fluidized beds has been the modeling of dense phase multiphase flow, especially for industrial solid-fuel boilers. This has prevented the Karhula R and D Center from using commercial codes, and as a consequence, own modeling approaches have been necessary. This presentation describes some main points of the modeling activities in circulating fluidized bed boilers. (author)

Massachusetts Institute of Technology Plasma Fusion Center 1987--1988 report to the President

International Nuclear Information System (INIS)

1988-06-01

During the past year, technical progress has been made in all Plasma Fusion Center (PFC) research programs. The Plasma Fusion Center is recognized as one of the leading university research laboratories in the physics and engineering aspects of magnetic confinement fusion. Its research programs have produced significant results on several fronts: the basic physics of high-temperature plasmas (plasmas theory, RF heating, free electron lasers, development of advanced diagnostics, and intermediate-scale experiments on the Versator tokamak and Constance mirror devices), major confinement results on the Alcator C tokamak, including pioneering investigations of the stability, heating, and confinement properties of plasmas at high densities, temperatures and magnetic fields, experiments on the medium-scale TARA tandem mirror, including the development of novel MHD stabilization techniques in axisymmetric geometry, and a broad program of fusion technology and engineering development that addresses problems in several critical subsystem areas (e.g., magnet systems, superconducting materials development, environmental and safety studies, advanced millimeter-wave source development, and system studies of fusion reactor design, operation, and technology requirements

Japanese utilities' plutonium utilization program

International Nuclear Information System (INIS)

Matsuo, Yuichiro.

1996-01-01

Japan's 10 utility companies are working and will continue to work towards establishing a fully closed nuclear fuel cycle. The key goals of which are: (1) reprocessing spent fuel; (2) recycling recovered uranium and plutonium; and (3) commercializing fast breeder technology by around the year 2030. This course of action by the Japanese electric power industry is in full accordance with Japan's national policy outlined in the government's report ''The Long-Term Program for Research, Development, and Nuclear Energy,'' which was published in June 1994. The Japanese civilian nuclear program is a long-term program that looks into the 21st century and beyond. It is quite true that sustaining the recycling option for energy security and the global environment demands a large investment. For it to be accepted by the public, safety must be the highest priority and will be pursued at a great cost if necessary. In its history, Japan has learned that as technology advances, costs will come down. The Japanese utility industry will continue investment in technology without compromising safety until the recycling option becomes more competitive with other options. This effort will be equally applied to the development of the commercial FBRs. The Japanese utility industry is confident that Japan's stable policy and strong objective to develop competitive and peaceful technology will contribute to the global economy and the environment without increasing the threat of plutonium proliferation

The Use of DOE Technologies at The World Trade Center Incident: Lessons Learned

Energy Technology Data Exchange (ETDEWEB)

McCabe, B.; Kovach, J.; Carpenter, C.; Blair, D.

2003-02-25

In response to the attack of the World Trade Center (WTC) on September 11, 2001, the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) assembled and deployed a HAZMAT Emergency Management Team (Team) to the disaster site (Site). The response team consisted of a Certified Industrial Hygienist and a rotating team of industrial hygienists, safety professionals, and certified HAZMAT instructors. Through research funded by the Department of Energy (DOE) Office of Environmental Management (EM) and managed by the National Energy Technology Laboratory (NETL), the IUOE conducted human factors assessments on baseline and innovative technologies during real-world conditions and served as an advocate at the WTC disaster site to identify opportunities for the use and evaluation of DOE technologies. From this work, it is clear that opportunities exist for more DOE technologies to be made readily available for use in future emergencies.

The Use of DOE Technologies at The World Trade Center Incident: Lessons Learned

International Nuclear Information System (INIS)

McCabe, B.; Kovach, J.; Carpenter, C.; Blair, D.

2003-01-01

In response to the attack of the World Trade Center (WTC) on September 11, 2001, the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) assembled and deployed a HAZMAT Emergency Management Team (Team) to the disaster site (Site). The response team consisted of a Certified Industrial Hygienist and a rotating team of industrial hygienists, safety professionals, and certified HAZMAT instructors. Through research funded by the Department of Energy (DOE) Office of Environmental Management (EM) and managed by the National Energy Technology Laboratory (NETL), the IUOE conducted human factors assessments on baseline and innovative technologies during real-world conditions and served as an advocate at the WTC disaster site to identify opportunities for the use and evaluation of DOE technologies. From this work, it is clear that opportunities exist for more DOE technologies to be made readily available for use in future emergencies

Geothermal direct-heat utilization assistance: Federal assistance program. Quarterly project progress report, October--December 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-01

The report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the first quarter of FY-96. It describes 90 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment and resources. Research activities are summarized on low-temperature resource assessment, geothermal district heating system cost evaluation and silica waste utilization project. Outreach activities include the publication of a geothermal direct use Bulletin, dissemination of information, geothermal library, technical papers and seminars, development of a webpage, and progress monitor reports on geothermal resources and utilization.

ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

Science.gov (United States)

Baresi, Larry

1989-03-01

The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

A Reliable, Non-Invasive Approach to Data Center Monitoring and Management

Directory of Open Access Journals (Sweden)

Moises Levy

2017-08-01

Full Text Available Recent standards, legislation, and best practices point to data center infrastructure management systems to control and monitor data center performance. This work presents an innovative approach to address some of the challenges that currently hinder data center management. It explains how monitoring and management systems should be envisioned and implemented. Key parameters associated with data center infrastructure and information technology equipment can be monitored in real-time across an entire facility using low-cost, low-power wireless sensors. Given the data centers’ mission critical nature, the system must be reliable and deployable through a non-invasive process. The need for the monitoring system is also presented through a feedback control systems perspective, which allows higher levels of automation. The data center monitoring and management system enables data gathering, analysis, and decision-making to improve performance, and to enhance asset utilization.

PMEL contributions to the collaboration: SCALING THE EARTH SYSTEM GRID TO PETASCALE DATA for the DOE SciDACs Earth System Grid Center for Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Hankin, Steve

2012-06-01

Drawing to a close after five years of funding from DOE's ASCR and BER program offices, the SciDAC-2 project called the Earth System Grid (ESG) Center for Enabling Technologies has successfully established a new capability for serving data from distributed centers. The system enables users to access, analyze, and visualize data using a globally federated collection of networks, computers and software. The ESG software now known as the Earth System Grid Federation (ESGF) has attracted a broad developer base and has been widely adopted so that it is now being utilized in serving the most comprehensive multi-model climate data sets in the world. The system is used to support international climate model intercomparison activities as well as high profile U.S. DOE, NOAA, NASA, and NSF projects. It currently provides more than 25,000 users access to more than half a petabyte of climate data (from models and from observations) and has enabled over a 1,000 scientific publications.

Importance of the documentation of the manual of quality and procedures handbook in the nuclear technology center

International Nuclear Information System (INIS)

Domech More, J.; Bolanos Hernandez, R.; Quitero Rosello, R.; Fernandez Rondon, M.; Milian Lorenzo, D.; Rodriguez Gual, M.

1997-01-01

In the present work is presented the methodology used for the elaboration of manual of quality of the Nuclear Technology Center and the technical Procedures Handbook for the execution of Preliminary Safety report of the Juragua Nuclear Power Plant, as well as the importance that has this documentation for the work of the center

The Role of Relevance in Future Teachers' Utility Value and Interest toward Technology

Science.gov (United States)

Kale, Ugur; Akcaoglu, Mete

2018-01-01

Seeing the relevance of tasks for future use is important for developing value and interest in them. We employed a pre- and post-test quasi-experimental design using a mixed-methods approach to examine if reflecting on the relevance of technology to future teaching practices influences elementary and secondary preservice teachers' utility value…

Piping inspection activities at the EPRI NDE Center

International Nuclear Information System (INIS)

Ammirato, F.V.

1988-01-01

Intergranular stress corrosion cracking (IGSCC) in the primary system of boiling water reactors (BWRs) has been a major reliability issue in recent years. BWR pipe cracking was first reported in 1974 with a low percentage of only small-diameter lines affected. However, with increased plant operating time, the number of reported cracking incidents has risen significantly and in 1982 and 1983 included the large-diameter recirculation lines. With the advent of cracking in large-diameter piping, innovative repair remedies were developed, such as weld overlay for repair (WOR). Although these remedies are effective in extending the service life of piping, they also present challenging NDE problems. The EPRI program for improving piping examination has aimed at systematically resolving the difficulties by optimizing techniques and procedures as well as by developing field-qualified automated examination equipment. The EPRI NDE Center's role has been the evaluation and transfer of the technology necessary to address the current piping examination problems of the nuclear utility industry. These activities normally include the following: technology assessment and improvement; validation through demonstrations and field trials; technology transfer reports, workshops, training, and qualification testing; and acquisition of relevant samples. The activities of the NDE Center are discussed

Utilization of Information and Communication Technology (ICT) Resources and Job Effectiveness among Library Staff in the University of Calabar and Cross River University of Technology, Nigeria

Science.gov (United States)

Ntui, Aniebiet Inyang; Inyang, Comfort Linus

2015-01-01

This study investigated utilization of Information and Communication Technology (ICT) resources and job effectiveness among library staff in the University of Calabar and Cross River University of Technology, Nigeria. To achieve the purpose of this study, four hypotheses were formulated to guide the study. Ex-post facto research design was adopted…

FY 1999 report on the results of the project on the industrial science technology R and D. R and D of complex carbonhydrate production/utilization technology (Development of CO2 fixation/effective utilization technology by applying complex carbonhydrate); 1999 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo. Fukugo toushitsu seisan riyo gijutsu no kenkyu kaihatsu (Fukugo toushitsu oyo nisankatanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of making an industrial use of complex carbonhydrate performing an important function in substance recognition, etc., which cannot be realized by only nucleic acid, protein and lipid, the R and D of the basic technology related to the production/utilization were conducted, and the FY 1999 results were reported. In the study of synthesis/utilization/remodeling technology of complex carbonhydrate using the chemical synthesis method, the R and D were made not only on the synthesis of sugar chain but for the synthesis method of the peptide added with sugar chain, that is, glycopeptide. Further, as to the reaction with the aim of the application, there was hope for large-quantity synthesis of milk oligosaccharide by the oxygen method. In the study of the design technology of complex carbonhydrate molecules, the systematical analysis using the model glycopeptide was conducted of effects of the sugar chain addition part and sugar chain structure on the 3D structure and physiological activity. Concerning the synthesis/utilization/remodeling technology of complex carbonhydrate using the biological method, study was made of the animal cell utilization, microorganism utilization, technology of structural analysis of complex carbonhydrate, etc. (NEDO)

Service utilization in community health centers in China: a comparison analysis with local hospitals

Directory of Open Access Journals (Sweden)

Wang Xiaohang

2006-08-01

Full Text Available Abstract Background Being an important part of China's Urban Health Care Reform System, Community Health Centers (CHCs have been established throughout the entire country and are presently undergoing substantial reconstruction. However, the services being delivered by the CHCs are far from reaching their performance targets. In order to assess the role of the CHCs, we examined their performance in six cities located in regions of South-East China. The purpose of this investigation was to identify the utilization and the efficiency of community health resources that are able to provide basic medical and public health services. Methods The study was approved by Peking University Health Science Center Institutional Reviewing Board (NO: IRB00001052-T1. Data were collected from all the local health bureaux and processed using SPSS software. Methods of analysis mainly included: descriptive analysis, paired T-test and one-way ANOVA. Results The six main functions of the CHCs were not fully exploited and the surveys that were collected on their efficiency and utilization of resources indicate that they have a low level of performance and lack the trust of local communities. Furthermore, the CHCs seriously lack funding support and operate under difficult circumstances, and residents have less positive attitudes towards them. Conclusion The community health service must be adjusted according to the requirements of urban medical and health reform, taking into account communities' health needs. More research is required on the living standards and health needs of residents living within the CHC's range, taking into consideration the users' needs in expanding the newly implemented service, and at the same time revising the old service system so as to make the development of CHCs realistic and capable of providing a better service to patients. Several suggestions are put forward for an attainable scheme for developing a community health service.

Technical Data Management Center: a focal point for meteorological and other environmental transport computing technology

International Nuclear Information System (INIS)

McGill, B.; Maskewitz, B.F.; Trubey, D.K.

1981-01-01

The Technical Data Management Center, collecting, packaging, analyzing, and distributing information, computer technology and data which includes meteorological and other environmental transport work is located at the Oak Ridge National Laboratory, within the Engineering Physics Division. Major activities include maintaining a collection of computing technology and associated literature citations to provide capabilities for meteorological and environmental work. Details of the activities on behalf of TDMC's sponsoring agency, the US Nuclear Regulatory Commission, are described

Bibliography: injection technology applicable to geothermal utilization

Energy Technology Data Exchange (ETDEWEB)

Darnell, A.J.; Eichelberger, R.L.

1982-03-19

This bibliography cites 500 documents that may be helpful in planning, analysis, research, and development of the various aspects of injection technology in geothermal applications. These documents include results from government research; development, demonstration, and commercialization programs; selected references from the literature; symposia; references from various technical societies and installations; reference books; reviews; and other selected material. The cited references are from (1) subject searching, using indexing, storage, and retrieval information data base of the Department of Energy's Technical Information Center's on-line retrieval system, RECON; (2) searches of references from the RECON data base, of work by authors known to be active in the field of geothermal energy research and development; (3) subject and author searches by the computerized data storage and retrieval system of Chemical Abstracts, American Chemical Society, Washington, DC; and (4) selected references from texts and reviews on this subject. Each citation includes title, author, author affiliation, date of publication, and source. The citations are listed in chronological order (most recent first) in each of the subject categories for which this search was made. The RECON accession number is also given.

Contributions to nuclear safety and radiation technologies in Ukraine by the Science and Technology Center in Ukraine (STCU)

International Nuclear Information System (INIS)

Taranenko, L.; Janouch, F.; Owsiacki, L.

2001-01-01

This paper presents Science and Technology Center in Ukraine (STCU) activities devoted to furthering nuclear and radiation safety, which is a prioritized STCU area. The STCU, an intergovernmental organization with the principle objective of non-proliferation, administers financial support from the USA, Canada, and the EU to Ukrainian projects in various scientific and technological areas; coordinates projects; and promotes the integration of Ukrainian scientists into the international scientific community, including involving western collaborators. The paper focuses on STCU's largest project to date 'Program Supporting Y2K Readiness at Ukrainian NPPs' initiated in April 1999 and designed to address possible Y2K readiness problems at 14 Ukrainian nuclear reactors. Other presented projects demonstrate a wide diversity of supported directions in the fields of nuclear and radiation safety, including reactor material improvement ('Improved Zirconium-Based Elements for Nuclear Reactors'), information technologies for nuclear industries ('Ukrainian Nuclear Data Bank in Slavutich'), and radiation health science ('Diagnostics and Treatment of Radiation-Induced Injuries of Human Biopolymers').

Utilization of Information and Communication Technology (ICT ...

African Journals Online (AJOL)

Such services include internet, portal, network, printing etc.the research revealed that, 73.49% of the respondents are aware of the services provides by the center. Of the total percentage of the respondents, however, 20.91% use the center occasionally, while 20.47% use the center very often. A workshop and other training ...

Report on the results of research and development under a consignment from NEDO of glycoconjugate production utilizing technologies. Development of technologies to fix and effectively utilize carbon dioxide by applying glycoconjugates; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper reports research results in fiscal 1997 for the `research and development of glycoconjugate production utilizing technologies`. In synthesizing, utilizing and remodeling technologies for glycoconjugates by means of chemical synthesis, studies were performed on developing methods to synthesize Gal {beta}1-3Gal NA(c {alpha})1-0-Serine in preparative scale, synthesizing high mannose type sugars of natural type without protection groups, and linking GlcNA or GalNAc onto partial peptide of fibroblast growth factor (FGF). In synthesizing, utilizing and remodeling technologies for glycoconjugates by using biological methods, studies were carried out, with regard to glycoconjugate synthesizing, utilizing and remodeling technologies utilizing animal cells, on identifying sugar structures of IFN-{gamma} produced from CHO cell line, and isolating CHO cell lines introduced with genes of sugar transferred enzyme GnTIV and/or GnTV. Furthermore, studies were conducted on glycoconjugate synthesizing, utilizing and remodeling technologies utilizing microorganisms, and glycoconjugate structure analyzing technologies. In addition, overall investigation was made on glycoconjugate production utilizing technologies. 113 refs., 76 figs., 18 tabs.

Utilization of bio-resources through nuclear technology

International Nuclear Information System (INIS)

Tamikazu Kume

2002-01-01

Nuclear technology such as gamma-ray, eb and ion beams is widely use for the utilization of bio-resources. Irradiation using gamma ray from 60 Co and electron beam is commercially used for the sterilization and modification of materials. Polysaccharides such as chitosan, sodium alginate, carrageenan, cellulose, pectin were easily degraded by irradiation and induced various kinds of biological activities, i.e. anti-bacterial activity, elicitor activity, plant growth promotion, suppression of environmental stress on plants. Some carbohydrate derivatives, carboxymethylcellulose (CMC), carboxymethyl-starch and carboxymethyl-chitin/chitosan, can be crosslinked under certain radiation condition and produced the biodegradable hydrogel for medical and agricultural uses. Ion beams have also been applied for mutation breeding for medical and agricultural use. Ion beams have also been applied for mutation breeding and the production of positron-emitting isotopes such as 11 C, 13 N, etc. It was succeeded to induce several kinds of flower-color and flower-form mutants in chrysanthemum and carnation by ion beams that have never produced by gamma-ray. The positron emitting tracer imaging system (PETIS) has been developed to obtain a dynamic image of plant transport in situ. (Author)

Distributed H₂ Supply for Fuel Cell Utility Vehicles Year 6 - Activity 3.5 - Development fo a National Center for Hydrogen Technology

Energy Technology Data Exchange (ETDEWEB)

Almlie, Jay

2012-04-15

The Energy & Environmental Research Center (EERC) has developed a high-pressure hydrogen production system that reforms a liquid organic feedstock and water at operating pressures up to 800 bar (~12,000 psig). The advantages of this system include the elimination of energy-intensive hydrogen compression, a smaller process footprint, and the elimination of gaseous or liquid hydrogen transport. This system could also potentially enable distributed hydrogen production from centralized coal. Processes have been investigated to gasify coal and then convert the syngas into alcohol or alkanes. These alcohols and alkanes could then be easily transported in bulk to distributed high-pressure water-reforming (HPWR)-based systems to deliver hydrogen economically. The intent of this activity was to utilize the EERC’s existing HPWR hydrogen production process, previously designed and constructed in a prior project phase, as a basis to improve operational and production performance of an existing demonstration unit. Parameters to be pursued included higher hydrogen delivery pressure, higher hydrogen production rates, and the ability to refill within a 5-minute time frame.

A Review of User-Centered Design for Diabetes-Related Consumer Health Informatics Technologies

Science.gov (United States)

LeRouge, Cynthia; Wickramasinghe, Nilmini

2013-01-01

User-centered design (UCD) is well recognized as an effective human factor engineering strategy for designing ease of use in the total customer experience with products and information technology that has been applied specifically to health care information technology systems. We conducted a literature review to analyze the current research regarding the use of UCD methods and principles to support the development or evaluation of diabetes-related consumer health informatics technology (CHIT) initiatives. Findings indicate that (1) UCD activities have been applied across the technology development life cycle stages, (2) there are benefits to incorporating UCD to better inform CHIT development in this area, and (3) the degree of adoption of the UCD process is quite uneven across diabetes CHIT studies. In addition, few to no studies report on methods used across all phases of the life cycle with process detail. To address that void, the Appendix provides an illustrative case study example of UCD techniques across development stages. PMID:23911188

Estimating CO2 Emission Reduction of Non-capture CO2 Utilization (NCCU) Technology

International Nuclear Information System (INIS)

Lee, Ji Hyun; Lee, Dong Woog; Gyu, Jang Se; Kwak, No-Sang; Lee, In Young; Jang, Kyung Ryoung; Shim, Jae-Goo; Choi, Jong Shin

2015-01-01

Estimating potential of CO 2 emission reduction of non-capture CO 2 utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of CO 2 contained in the flue gas. For the estimating the CO 2 emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle CO 2 of 100 tons per day was performed, Also for the estimation of the indirect CO 2 reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall CO 2 emission was estimated as 48,862 ton per year based on the energy consumption for the production of NaHCO 3 (7.4 GJ/tNaHCO 3 ). While for the NCCU technology, the direct CO 2 reduction through the CO 2 carbonation was estimated as 36,500 ton per year and the indirect CO 2 reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of CO 2 contained in the flue was energy efficient and could be one of the promising technology for the low CO 2 emission technology.

Photovoltaic technology for sustainability: An investigation of the distributed utility concept as a policy framework

Science.gov (United States)

Letendre, Steven Emery

The U.S. electric utility sector in its current configuration is unsustainable. The majority of electricity in the United States is produced using finite fossil fuels. In addition, significant potential exists to improve the nation's efficient use of energy. A sustainable electric utility sector will be characterized by increased use of renewable energy sources and high levels of end-use efficiency. This dissertation analyzes two alternative policy approaches designed to move the U.S. electric utility sector toward sustainability. One approach is labeled incremental which involves maintaining the centralized structure of the electric utility sector but facilitating the introduction of renewable energy and efficiency into the electrical system through the pricing mechanism. A second policy approach was described in which structural changes are encouraged based on the emerging distributed utility (DU) concept. A structural policy orientation attempts to capture the unique localized benefits that distributed renewable resources and energy efficiency offer to electric utility companies and their customers. A market penetration analysis of PV in centralized energy supply and distributed peak-shaving applications is conducted for a case-study electric utility company. Sensitivity analysis was performed based on incremental and structural policy orientations. The analysis provides compelling evidence which suggests that policies designed to bring about structural change in the electric utility sector are needed to move the industry toward sustainability. Specifically, the analysis demonstrates that PV technology, a key renewable energy option likely to play an important role in a renewable energy future, will begin to penetrate the electrical system in distributed peak-shaving applications long before the technology is introduced as a centralized energy supply option. Most policies to date, which I term incremental, attempt to encourage energy efficiency and renewables

[Medical equipment companies and their ties with technology development centers in Mexico].

Science.gov (United States)

Hernández, B; Arredondo, A; Cruz, C; Sánchez, E; Damián, T

1993-10-01

The purpose of this study was to determine the characteristics of the companies that produce, distribute, and service medical equipment in Mexico and the factors related to whether or not they had established ties with research and technology development centers. The data analyzed came from a survey of such companies carried out in Mexico City and environs in 1989. The information was updated in 1991. Multivariate analyses were carried out in order to identify the characteristics of companies that had established ties or wished to do so and the areas of interest of those companies. Of 208 companies surveyed, only 23% had ties with research centers. The companies that had such ties or were interested in establishing them tended to invest in research and to have made plans for expansion. The establishment of ties appeared to be a two-way process, with positive consequences for the companies involved, the research centers, and the health sector. It was concluded that it would be advantageous to design programs to promote ties with companies having the characteristics mentioned.

Center for Technology for Advanced Scientific Component Software (TASCS)

Energy Technology Data Exchange (ETDEWEB)

Damevski, Kostadin [Virginia State Univ., Petersburg, VA (United States)

2009-03-30

A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

Advancing Partner Notification Through Electronic Communication Technology: A Review of Acceptability and Utilization Research.

Science.gov (United States)

Pellowski, Jennifer; Mathews, Catherine; Kalichman, Moira O; Dewing, Sarah; Lurie, Mark N; Kalichman, Seth C

2016-06-01

A cornerstone of sexually transmitted infection (STI) prevention is the identification, tracing, and notification of sex partners of index patients. Although partner notification reduces disease burden and prevents new infections as well as reinfections, studies show that only a limited number of partners are ever notified. Electronic communication technologies, namely, the Internet, text messaging, and phone calls (i.e., e-notification), have the potential to expand partner services. We conducted a systematic review of studies that have investigated the acceptability and utility of e-notification. We identified 23 studies that met the following criteria: (a) 9 studies presented data on the acceptability of technology-based communications for contacting sex partner(s), and (b) 14 studies reported on the utilization of communication technologies for partner notification. Studies found high levels of interest in and acceptability of e-notification; however, there was little evidence for actual use of e-notification. Taken together, results suggest that electronic communications could have their greatest impact in notifying less committed partners who would otherwise be uninformed of their STI exposure. In addition, all studies to date have been conducted in resource-rich countries, although the low cost of e-notification may have its greatest impact in resource-constrained settings. Research is needed to determine the best practices for exploiting the opportunities afforded by electronic communications for expanding STI partner services.

FY 2000 report on the results of the development of the environmentally friendly type high efficiency energy utilization system. Part 2. Study of the effective utilization technology of high efficiency energy (Study of the optimum system design technology); 2000 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu seika hokokusho. 2. Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-05-01

The paper conducted the development of the environmentally friendly type high efficiency energy utilization system and the R and D of the high efficiency energy effective utilization technology, and the FY 2000 results were summed up. As to the energy transportation/storage technology, the R and D were made on the following: methanol/energy system, non-equilibrium high efficiency methanol decomposition reaction technology, development of multiple functions of catalyst, high efficiency heat pump technology using hydrogen storage alloys, heat-hydrogen recovery/transportation/utilization technology, vacuum insulated heat transport piping system, surfactant used for high density heat transport, high density latent heat transportation technology, etc. Concerning the energy supply/utilization technology, the R and D were made of the heat supply system using high efficient heat pump corresponding to multiple fuels. Relating to the environmental load reduction technology, the energy conserved heat pump system using natural coolant. As to the optimum system design technology, the comprehensive preparation of element technology, etc. (NEDO)

Institutional overviews. Overview of the JAEA and the Nuclear Nonproliferation Science and Technology Center

International Nuclear Information System (INIS)

Senzaki, Masao

2006-01-01

The Nuclear Nonproliferation Science and Technology Center (NPSTC) was formed within the new Japan Atomic Energy Agency (JAEA) to carry out safeguards and material control duties for the JAEA. Development of technologies and procedures for safeguards is an important duty. In addition, the new NPSTC will assume a 'think tank' role in support of the nonproliferation regime, help train nonproliferation experts, and cooperate with academic, government and non-governmental organizations on nonproliferation issues. This report briefly summarizes the formation of the JAEA and describes the duties and structure of the NPSTC in detail. (author)

An Investigation of Factors Affecting Utilization of Information Technology (IT by Agricultural Students

Directory of Open Access Journals (Sweden)

Masoud Rezaei

2012-03-01

Full Text Available The present study was carried out with the aim of investigating factors affecting utilization of information technology by students of agriculture. A survey approach was used in this study and a questionnaire was developed to gather the data. The study population was postgraduate students (MS and PhD of economic and agricultural development faculty in Tehran University who were selected by applying random sampling technique. Sample size for students was 61 persons. Data was analyzed by using SPSS/WIN software. The results of the research indicated that there was a positive significant relationship between using of information technology by students and their age, average, prior experience, information technology skills, innovativeness, perceived ease of use, attitude and self-efficacy. The relationship between computer anxiety and using of IT was negative. Stepwise Regression Analysis showed that innovativeness and attitude predict 53.2 percent of variations of IT use by students.

A Descriptive Study towards Green Computing Practice Application for Data Centers in IT Based Industries

Directory of Open Access Journals (Sweden)

Anthony Jnr. Bokolo

2018-01-01

Full Text Available The progressive upsurge in demand for processing and computing power has led to a subsequent upsurge in data center carbon emissions, cost incurred, unethical waste management, depletion of natural resources and high energy utilization. This raises the issue of the sustainability attainment in data centers of Information Technology (IT based industries. Green computing practice can be applied to facilitate sustainability attainment as IT based industries utilizes data centers to provide services to staffs, practitioners and end users. But it is a known fact that enterprise servers utilize huge quantity of energy and incur other expenditures in cooling operations and it is difficult to address the needs of accuracy and efficiency in data centers while yet encouraging a greener application practice alongside cost reduction. Thus this research study focus on the practice application of Green computing in data centers which houses servers and as such presents the Green computing life cycle strategies and best practices to be practiced for better management in data centers in IT based industries. Data was collected through questionnaire from 133 respondents in industries that currently operate their in-house data centers. The analysed data was used to verify the Green computing life cycle strategies presented in this study. Findings from the data shows that each of the life cycles strategies is significant in assisting IT based industries apply Green computing practices in their data centers. This study would be of interest to knowledge and data management practitioners as well as environmental manager and academicians in deploying Green data centers in their organizations.

Artificial pinning center technology to enhance vortex pinning in YBCO coated conductors

International Nuclear Information System (INIS)

Matsumoto, Kaname; Mele, Paolo

2010-01-01

Crystalline defects on the nano-scale, which are called artificial pinning centers (APCs), were successfully introduced into high-temperature superconductors (HTS) by nanotechnology, in order to strongly pin the quantized vortices. The critical current densities, J c , of the HTS films were dramatically improved by APCs. It is possible to form APCs in high-quality epitaxial films, keeping the desired dimensionality, volume fraction, spatial distribution and so on. The in-field J c of HTS films at 77 K was improved by one order of magnitude compared with previous values using APCs. This technology can be applied to the coated conductor technology in progress, and a high J c has already been reported. A current outline of the research is described in this review.

Energy Center Structure Optimization by using Smart Technologies in Process Control System

Science.gov (United States)

Shilkina, Svetlana V.

2018-03-01

The article deals with practical application of fuzzy logic methods in process control systems. A control object - agroindustrial greenhouse complex, which includes its own energy center - is considered. The paper analyzes object power supply options taking into account connection to external power grids and/or installation of own power generating equipment with various layouts. The main problem of a greenhouse facility basic process is extremely uneven power consumption, which forces to purchase redundant generating equipment idling most of the time, which quite negatively affects project profitability. Energy center structure optimization is largely based on solving the object process control system construction issue. To cut investor’s costs it was proposed to optimize power consumption by building an energy-saving production control system based on a fuzzy logic controller. The developed algorithm of automated process control system functioning ensured more even electric and thermal energy consumption, allowed to propose construction of the object energy center with a smaller number of units due to their more even utilization. As a result, it is shown how practical use of microclimate parameters fuzzy control system during object functioning leads to optimization of agroindustrial complex energy facility structure, which contributes to a significant reduction in object construction and operation costs.

Progress report on joint utilization of the Musashi reactor, 10(1985)

International Nuclear Information System (INIS)

1986-06-01

The results of the research by those who commonly utilized the reactor in Musashi Institute of Technology and others in fiscal year 1985 were compiled as a report. The number of application was one case of medical treatment, three cases related to living things, five experiments and 34 cases of general irradiation, and all were adopted. The number of actual utilization was all except one case related to living things. The actual result of the daily utilization from September, 1985 to March, 1986 is shown. The gists of 42 reports are collected. In fiscal year 1986, 44 researches are adopted for the common utilization of the reactor and others. The connection between the Musashi reactor and the large computer center in University of Tokyo was increased to 9600 bps, and 4800 bps are used for carrying out remote jobs as before, while 4800 bps are used for utilizing four TSS terminal equipments. (Kako, I.)

The Feasibility of Utilizing Wind Energy in Commercial Buildings With Special Reference to the Kingdom of Bahrain

Science.gov (United States)

Abdulrahim Saeed, Saeed

2017-11-01

This article shall investigate the feasibility of utilizing wind energy for commercial buildings with special reference to the Kingdom of Bahrain. Bahrain World Trade Center which was built in 2008, is located in the city of Manama. The fifty-story complex contains identical twin towers that rise over 240 meters in height. The towers are connected by three bridges which hold three turbines each 29 meters long. The three turbines were originally design to provide electric energy required for lighting. The Bahrain World Trade Center was selected as a case study to investigate the feasibility of utilizing wind energy technologies in skyscrapers with special reference to the Kingdom of Bahrain. It is hoped that the findings and conclusion of the study shall be of some value for future utilization of wind energy in the GCC countries and the world at large.

Annual report of Nuclear Technology and Education Center. April 1, 2008 - March 31, 2009

International Nuclear Information System (INIS)

2010-03-01

This annual report summarizes the activities of Nuclear Technology and Education Center (NuTEC) of Japan Atomic Energy Agency (JAEA) in the fiscal year 2008. This year is the 50th anniversary of NuTEC since the starting of the first training course in January, 1958 at the Radioisotope-School in Tokyo. On this occasion, a commemorative symposium was held and attended by around 150 participants. NuTEC flexibly designed and conducted out new training courses upon requests while conducting the annually scheduled training programs. In spite of some cancellations in an economic downturn, the number of trainees who completed the domestic training courses was 404, and that of those who completed the staff technical training courses was 862. As a result, the total number of trainees during this period grew over the previous fiscal year. 'Nuclear Training for METI Inspectors' was newly offered and also 'Qualification Course for the 3rd class radiation protection supervisor' was held at Tsuruga Technical High School. JAEA continued its cooperative activities with universities; cooperation with graduate school of University of Tokyo, cooperative graduate school program with 14 graduate schools and one under-graduate school, and newly began to cooperate with Tsuyama National College of Technology. JAEA also continued cooperative activities with Nuclear HRD Program initiated by MEXT and METI implemented in 2007. The joint course has continued networking with five universities including newly two universities utilizing the Japan Nuclear Education Network (JNEN). International cooperation was also conducted as scheduled. The joint training course and the instructor training program were conducted bilaterally with Indonesia, Thailand and Vietnam. JAEA exchanged a memorandum with CEA/INSTN and initiated preparatory work for on internship student from INSTN. Moreover, JAEA newly joined European Nuclear Education Network (ENEN) and began to prepare for new international training

FY 1999 report on the results of the project on the industrial science technology R and D. Development of utilization technology of biological resources such as bioconsortium system (Development of the bioconsortium system utilization/production technology); 1999 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugou seibutsukei tou seibutsu shigen riyo gijutsu kaihatsu (Fukugou seibutsukei riyo seisan gijutsu no kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of developing the functional substance production technology, petroleum degrading/cleaning technology and high-grade utilization technology of the unused petroleum fraction, study was conducted of the culture control technology in substance production and substance decomposition by bioconsortia, and the FY 1999 results were reported. As to the functional material production technology, study was made of the separation/culture technology, functional substance production technology using bioconsortia (control substance searching method in the ocean microbial consortia system, isolation of control substance/structure determination/separation of production bacteria, elucidation of the inter-species communication substance function, heightening of function of the production microbial consortia), etc. Concerning the effective degrading/cleaning technology of petroleum compounds, study was made of the molecular genetic analysis technology, histochemical analysis technology, analysis technology of the solvent resistance mechanism, bioconsortia analysis system technology, global environmental purification technology such as the effective decomposition of environmental pollutants, etc. Relating to the high-grade utilization technology of the unused petroleum fraction, study was made of the chemical analysis of the photolysis crude oil, selection of the decomposition microbial consortia, etc. (NEDO)

Monitoring based maintenance utilizing actual stress sensory technology

Science.gov (United States)

Sumitro, Sunaryo; Kurokawa, Shoji; Shimano, Keiji; Wang, Ming L.

2005-06-01

In recent years, many infrastructures have been deteriorating. In order to maintain sustainability of those infrastructures which have significant influence on social lifelines, economical and rational maintenance management should be carried out to evaluate the life cycle cost (LCC). The development of structural health monitoring systems, such as deriving evaluation techniques for the field structural condition of existing structures and identification techniques for the significant engineering properties of new structures, can be considered as the first step in resolving the above problem. New innovative evaluation methods need to be devised to identify the deterioration of infrastructures, e.g. steel tendons, cables in cable-stayed bridges and strands embedded in pre- or post-tensioned concrete structures. One of the possible solutions that show 'AtoE' characteristics, i.e., (a)ccuracy, (b)enefit, (c)ompendiousness, (d)urability and (e)ase of operation, elasto-magnetic (EM) actual stress sensory technology utilizing the sensitivity of incremental magnetic permeability to stress change, has been developed. Numerous verification tests on various steel materials have been conducted. By comparing with load cell, strain gage and other sensory technology measurement results, the actual stresses of steel tendons in a pre-stressed concrete structure at the following stages have been thoroughly investigated: (i) pre-stress change due to set-loss (anchorage slippage) at the tendon fixation stage; (ii) pre-stress change due to the tendon relaxation stage; (iii) concrete creep and shrinkage at the long term pre-stressing stage; (iv) pre-stress change in the cyclic fatigue loading stage; and (v) pre-stress change due to the re-pre-stress setting stage. As the result of this testing, it is confirmed that EM sensory technology enables one to measure actual stress in steel wire, strands and steel bars precisely without destroying the polyethylene covering sheath and enables

Technology utilization and American competitiveness

Science.gov (United States)

Penaranda, Frank; Arnold, Ray; Fetterolf, Fred

1992-01-01

This session of discussions reports on two sides of the technology transfer issue. The speakers are representatives of the aluminum industry (Alcoa Aluminum) and the National Aeronautics and Space Administration, Office of Commercial Programs. They discuss what technology transfer means, what NASA does for industry, and how information is disseminated.

Massachusetts Institute of Technology, Plasma Fusion Center, 1984-1985. Report to the President

International Nuclear Information System (INIS)

1985-07-01

During the past year, technical progress has been made in all Plasma Fusion Center (PFC) research programs. The Plasma Fusion Center is recognized as one of the leading university research laboratories in the physics and engineering aspects of magnetic confinement fusion. Its research programs have produced significant results on four fronts: (1) the basic physics of high-temperature plasmas (plasma theory, rf heating, free electron lasers, development of advanced diagnostics and small-scale experiments on the Versator tokamak and Constance mirror devices); (2) major confinement results on the Alcator C tokamak, including pioneering investigations of the stability, heating, and confinement properties of plasmas at high densities, temperatures and magnetic fields; (3) development of an innovative design for axisymmetric tandem mirrors with inboard thermal barriers, with initial operation of the TARA tandem mirror experiment beginning in 1984; and (4) a broad program of fusion technology and engineering development that addresses problems in several critical subsystem areas (e.g., magnet systems, superconducting materials development, environmental and safety studies, advanced millimeter wave source development, and system studies of fusion reactor design, operation, and technology requirements). A review of these programs is given

West Valley Demonstration Project facilities utilization plan for the existing facilities at the Western New York Nuclear Service Center

International Nuclear Information System (INIS)

Skillern, C.G.

1986-05-01

In 1980, Congress passed Public Law 96-368, the West Valley Demonstration Project (WVDP) Act. As a primary objective, the Act authorized the US Department of Energy (DOE) to solidify the high-level waste (HLW) stored at the Western New York Nuclear Service Center (WNYNSC) into a form suitable for transportation and disposal in a federal repository. This report will describe how WVDP proposes to use the existing WNYNSC Facilities in an efficient and technically effective manner to comply with Public Law 96-368. In support of the above cited law, the DOE has entered into a ''Cooperative agreement between the United States Department of Energy and the New York State Energy Research and Development Authority on the Western New York Nuclear Service Center at West Valley, New York.'' The state-owned areas turned over to the DOE for use are as follows: Process Plant, Waste Storage, Low-Level Waste Treatment Facility, Service Facilities, Plant Security, and Additional Facilities. The Facilities Utilization Plan (FUP) describes how the state-owned facilities will be utilized to complete the Project; it is divided into five sections as follows: Executive Summary - an overview; Introduction - the WVDP approach to utilizing the WNYNSC Facilities; WVDP Systems - a brief functional description of the system, list of equipment and components to be used and decontamination and decommissioning (D and D) support; WVDP Support Facilities; and Caveats that could effect or change the potential usage of a particular area

Space Technology Demonstrations Using Low Cost, Short-Schedule Airborne and Range Facilities at the Dryden Flight Research Center

Science.gov (United States)

Carter, John; Kelly, John; Jones, Dan; Lee, James

2013-01-01

There is a national effort to expedite advanced space technologies on new space systems for both government and commercial applications. In order to lower risk, these technologies should be demonstrated in a relevant environment before being installed in new space systems. This presentation introduces several low cost, short schedule space technology demonstrations using airborne and range facilities available at the Dryden Flight Research Center.

Technology Can Help Young Children Succeed. PACER Center ACTion Information Sheets: PHP-c70

Science.gov (United States)

PACER Center, 2014

2014-01-01

Parents of young children with disabilities are discovering that carefully selected computer software and mobile apps can provide many benefits such as improved self-esteem, a longer attention span, and inclusion among family and other children that help their children succeed at home and in school. PACER's Simon Technology Center (STC) can help…

PCARRD's strategies for technology transfer: The agriculture and resources regional technology information system and the regional applied communication program

International Nuclear Information System (INIS)

Stuart, T.H.; Mamon, C.R.

1990-05-01

This paper describes the Agriculture and Resources Regional Technology Information System (ARRTIS) and the Regional Applied Communication Outreach Program (RAC) of PCARRD. The ARRTIS and the RACO are the strategies in communicating scientific and technology-based information. The ARRTIS is an information system that provides an information base on the status of technologies at various levels of maturity (generation, adaptation, verification, piloting, dissemination and utilization) and offers technology alternatives based on environmental requirements, costs and returns analysis or feasibility of the technologies. This information base provides the repository of technology information from which the Applied Communication Program draws its information for packaging into various formats, using various strategies/media to cater to various users in the regions most especially the farmers. Meanwhile, as PCARRD executes its mission of developing the national research system, it incorporates a development support communication program through the RACO. The RACO is essentially a working component of a regional research center/consortium in each region coordinated by the Applied Communication Division of PCARRD. It aims at reaching farmers and their families, extensionists, administrators, policy makers and entrepreneurs with research information and technology which use a variety of appropriate communication channels, modern communication technology and strategies so that they may actively participate in research diffusion and utilization. (author). 7 refs

Progress in MMIC technology for satellite communications

Science.gov (United States)

Haugland, Edward J.; Leonard, Regis F.

1987-01-01

NASA's Lewis Research Center is actively involved in the development of monolithic microwave and millimeter-wave integrated circuits (MMICs). The approach of the program is to support basic research under grant or in-house, while MMIC development is done under contract, thereby facilitating the transfer of technology to users. Preliminary thrusts of the program have been the extension of technology to higher frequencies (60 GHz), degrees of complexity, and performance (power, efficiency, noise figure) by utilizing novel circuit designs, processes, and materials. A review of the progress made so far is presented.

Carbon footprint of forest and tree utilization technologies in life cycle approach

Science.gov (United States)

Polgár, András; Pécsinger, Judit

2017-04-01

In our research project a suitable method has been developed related the technological aspect of the environmental assessment of land use changes caused by climate change. We have prepared an eco-balance (environmental inventory) to the environmental effects classification in life-cycle approach in connection with the typical agricultural / forest and tree utilization technologies. The use of balances and environmental classification makes possible to compare land-use technologies and their environmental effects per common functional unit. In order to test our environmental analysis model, we carried out surveys in sample of forest stands. We set up an eco-balance of the working systems of intermediate cutting and final harvest in the stands of beech, oak, spruce, acacia, poplar and short rotation energy plantations (willow, poplar). We set up the life-cycle plan of the surveyed working systems by using the GaBi 6.0 Professional software and carried out midpoint and endpoint impact assessment. Out of the results, we applied the values of CML 2001 - Global Warming Potential (GWP 100 years) [kg CO2-Equiv.] and Eco-Indicator 99 - Human health, Climate Change [DALY]. On the basis of the values we set up a ranking of technology. By this, we received the environmental impact classification of the technologies based on carbon footprint. The working systems had the greatest impact on global warming (GWP 100 years) throughout their whole life cycle. This is explained by the amount of carbon dioxide releasing to the atmosphere resulting from the fuel of the technologies. Abiotic depletion (ADP foss) and marine aquatic ecotoxicity (MAETP) emerged also as significant impact categories. These impact categories can be explained by the share of input of fuel and lube. On the basis of the most significant environmental impact category (carbon footprint), we perform the relative life cycle contribution and ranking of each technologies. The technological life cycle stages examined

A Dynamic and Interactive Monitoring System of Data Center Resources

Directory of Open Access Journals (Sweden)

Yu Ling-Fei

2016-01-01

Full Text Available To maximize the utilization and effectiveness of resources, it is very necessary to have a well suited management system for modern data centers. Traditional approaches to resource provisioning and service requests have proven to be ill suited for virtualization and cloud computing. The manual handoffs between technology teams were also highly inefficient and poorly documented. In this paper, a dynamic and interactive monitoring system for data center resources, ResourceView, is presented. By consolidating all data center management functionality into a single interface, ResourceView shares a common view of the timeline metric status, while providing comprehensive, centralized monitoring of data center physical and virtual IT assets including power, cooling, physical space and VMs, so that to improve availability and efficiency. In addition, servers and VMs can be monitored from several viewpoints such as clusters, racks and projects, which is very convenient for users.

Mode 2 in action. Working across sectors to create a Center for Humanities and Technology

NARCIS (Netherlands)

Wyatt, S.M.E.

2015-01-01

This article examines recent developments in Amsterdam to establish a Center for Humanities and Technology (CHAT). The project is a collaboration between public research institutions and a private partner. To date, a White Paper has been produced that sets out a shared research agenda addressing

Development and Implementation of the Midwest Geological Sequestration Consortium CO₂-Technology Transfer Center

Energy Technology Data Exchange (ETDEWEB)

Greenberg, Sallie E. [Univ. of Illinois, Champaign, IL (United States)

2015-06-30

In 2009, the Illinois State Geological Survey (ISGS), in collaboration with the Midwest Geological Sequestration Consortium (MGSC), created a regional technology training center to disseminate carbon capture and sequestration (CCS) technology gained through leadership and participation in regional carbon sequestration projects. This technology training center was titled and branded as the Sequestration Training and Education Program (STEP). Over the last six years STEP has provided local, regional, national, and international education and training opportunities for engineers, geologists, service providers, regulators, executives, K-12 students, K-12 educators, undergraduate students, graduate students, university and community college faculty members, and participants of community programs and functions, community organizations, and others. The goal for STEP educational programs has been on knowledge sharing and capacity building to stimulate economic recovery and development by training personnel for commercial CCS projects. STEP has worked with local, national and international professional organizations and regional experts to leverage existing training opportunities and provide stand-alone training. This report gives detailed information on STEP activities during the grant period (2009-2015).

Utilizing Technology Effectively to Improve Millennials' Educational Performance: An Exploratory Look at Business Students' Perceptions

Science.gov (United States)

Aviles, Maria; Eastman, Jacqueline K.

2012-01-01

Purpose: The purpose of this paper is to discuss how technological tools, such as Web 2.0 and online learning management systems, can be utilized to improve Millennials' educational performance. Design/methodology/approach: An exploratory survey of Millennial business students was conducted to measure their self-reported use and perceived…

An analysis of the Spanish electrical utility industry. Economies of scale, technological progress and efficiency

International Nuclear Information System (INIS)

Arcos, Angel; De Toledo, Pablo Alvarez

2009-01-01

In this paper we propose a model to explain the behaviour of the Spanish electrical utility industry during the period 1987-1997, under the then existing regulatory system (Marco Legal Estable). The paper will study the presence of economies of scale, the effect of technological progress and the differences in the efficiency of the different companies within the market. The paper concludes that the Spanish electrical utility industry was not, in fact, characterized by economies of scale during this period, but witnessed a great improvement in efficiency within that period. All the critical market factors remind stable. (author)

Regulating technological change - The strategic reactions of utility companies towards subsidy policies in the German, Spanish and UK electricity markets

International Nuclear Information System (INIS)

Stenzel, Till; Frenzel, Alexander

2008-01-01

This paper focuses on how incumbent electric utilities strategically react to subsidy schemes supporting renewable energy technologies in the UK, Germany, and Spain. Firms coordinate the development of their technological capabilities and their political activities to shape their regulatory environment. Analysing the diffusion of wind power in these countries, we show that the different ways, in which firms coordinate their technological and political strategies, lead to very different market outcomes, both for the firms' market share and the size of the overall market. Although incumbents are usually seen as being resistant to change in energy systems, we show that Spanish utilities proactively drive the diffusion of wind power. We speculate about the relation between the ownership structure of the energy system and its inertia with respect to the integration of new technologies. We derive novel policy implications that explicitly take into account the strategic actions of incumbent firms shaping the technological and regulatory system

Architecture academic by information technologies utilization ...

African Journals Online (AJOL)

This research aims at studying teaching modern architecture with information technology approach. Today, information technology is used to transmit knowledge in many universities of the world. Information technology tools are potentially capable of providing engineering students with a broad continuum of curriculum in ...

Customer care policy for utilities - demonstrated with the example of a call center; Customer Care fuer EVU - Wirkungszusammenhaenge am Beispiel des Telefon-Service

Energy Technology Data Exchange (ETDEWEB)

Weisse, D. [Consulting und Services, pdv Unternehmensberatung GmbH, Roesrath (Germany)

2000-01-10

Customer care policy, for preventing change to another provider and consolidating customer loyalty, is becoming a strategic (powerful) instrument for a utility in the competitive market. But what does this really imply for the day-to-day process of dealing with client-specific operations and workflows? The article describes the interactions between strategic marketing for ensuring client satisfaction and the resulting requirements to be met by a utility's call center, and also describes the key 'parameters' and requirements for successful day-to-day management of call centers. (orig./CB) [German] Customer Care zur Reduzierung der Wechselbereitschaft bzw. zur Erhoehung der Kundenbindung wird fuer EVU zu einem strategischen Instrument im Kampf um die Kunden. Aber was bedeutet dies fuer die operative Abwicklung der kundenbezogenen Geschaeftsprozesse? Der Verfasser erlaeutert die Zusammenhaenge zwischen dem strategischen Ziel der Kundenzufriedenheit und der operativen Umsetzung des Telefon-Service und beschreibt die 'Stellschrauben', die fuer diesen Zweck bei der Planung aber auch im taeglichen Management eines Call Centers zur Verfuegung stehen. (orig.)

Resourceful utilization technology for natural gas

International Nuclear Information System (INIS)

Matsumura, Y.

1994-01-01

This paper is a description of new applications that will contribute in increasing the demand for natural gas. First, technical issues to turn natural gas into a more resourceful fuel (efficient transportation and storage, integrated utilization of energies, uses as non-fuel), and also pitch-based high performance carbon materials and utilization techniques in the field of energy (isotropic carbon fiber, activated carbon fiber, spherical carbon micro-beads, high modulus carbon fiber). (TEC)

Contributions to nuclear safety and radiation technologies in Ukraine by the Science and Technology Center in Ukraine (STCU)

Energy Technology Data Exchange (ETDEWEB)

Taranenko, L. E-mail: lyubov@stcu.kiev.ua; Janouch, F.; Owsiacki, L

2001-06-01

This paper presents Science and Technology Center in Ukraine (STCU) activities devoted to furthering nuclear and radiation safety, which is a prioritized STCU area. The STCU, an intergovernmental organization with the principle objective of non-proliferation, administers financial support from the USA, Canada, and the EU to Ukrainian projects in various scientific and technological areas; coordinates projects; and promotes the integration of Ukrainian scientists into the international scientific community, including involving western collaborators. The paper focuses on STCU's largest project to date 'Program Supporting Y2K Readiness at Ukrainian NPPs' initiated in April 1999 and designed to address possible Y2K readiness problems at 14 Ukrainian nuclear reactors. Other presented projects demonstrate a wide diversity of supported directions in the fields of nuclear and radiation safety, including reactor material improvement ('Improved Zirconium-Based Elements for Nuclear Reactors'), information technologies for nuclear industries ('Ukrainian Nuclear Data Bank in Slavutich'), and radiation health science ('Diagnostics and Treatment of Radiation-Induced Injuries of Human Biopolymers')

QuEST: Qualifying Environmentally Sustainable Technologies. Volume 4

Science.gov (United States)

Lewis, Pattie L.

2009-01-01

In 2004, in one of their first collaborative efforts, Centro Para Prevencao da Poluicao (Portuguese Center for Pollution Prevention or C3P). teamed with Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) and two Portuguese entities, TAP Portugal (Portuguese National Airline) and OGMA Indtistria Aeron utica de Portugal (Portuguese Aeronautics Industry), to target the reduction of hexavalent chromium, cadmium, and volatile organic compounds (VOCs) in aircraft maintenance operations. This project focused on two coating systems that utilize non-chrome pretreatments and low-VOC primers and topcoats.

Process and device integration for silicon tunnel FETs utilizing isoelectronic trap technology to enhance the ON current

Science.gov (United States)

Mori, Takahiro; Asai, Hidehiro; Fukuda, Koichi; Matsukawa, Takashi

2018-04-01

A tunnel FET (TFET) is a candidate replacement for conventional MOSFETs to realize low-power LSI. The most significant issue with the practical application of TFETs concerns their low tunneling current. Si is an indirect-gap material with a low band-to-band tunneling probability and is not favored for the channel. However, a new technology has recently been proposed to enhance the tunneling current in Si-TFETs by utilizing isoelectronic trap (IET) technology. IET technology provides an innovative approach to realizing low-power LSI with TFETs. In this paper, state-of-the-art research on Si-TFETs with IET technology from the viewpoint of process and device integration is reviewed.

Utility Computing: Reality and Beyond

Science.gov (United States)

Ivanov, Ivan I.

Utility Computing is not a new concept. It involves organizing and providing a wide range of computing-related services as public utilities. Much like water, gas, electricity and telecommunications, the concept of computing as public utility was announced in 1955. Utility Computing remained a concept for near 50 years. Now some models and forms of Utility Computing are emerging such as storage and server virtualization, grid computing, and automated provisioning. Recent trends in Utility Computing as a complex technology involve business procedures that could profoundly transform the nature of companies' IT services, organizational IT strategies and technology infrastructure, and business models. In the ultimate Utility Computing models, organizations will be able to acquire as much IT services as they need, whenever and wherever they need them. Based on networked businesses and new secure online applications, Utility Computing would facilitate "agility-integration" of IT resources and services within and between virtual companies. With the application of Utility Computing there could be concealment of the complexity of IT, reduction of operational expenses, and converting of IT costs to variable `on-demand' services. How far should technology, business and society go to adopt Utility Computing forms, modes and models?

6th Conference on Coal Utilization Technology; Dai 6 kai sekitan riyo gijutsu kaigi koenshu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

The paper compiled the papers presented in the 6th Conference on Coal Utilization Technology held in September 1996. With relation to the fluidized bed boiler, reported were Field operation test of Wakamatsu PFBC combined cycle power plant and Development of pressurized internally circulating fluidized bed combustion technology. Regarding the coal reformation, Development of advanced coal cleaning process, Coal preparation and coal cleaning in the dry process, etc. Concerning the combustion technology, Study of the O2/CO2 combustion technology, Development of pressurized coal partial combustor, etc. About the CWM, Development of low rank coals upgrading and their CWM producing technology, Technique of CWM distribution system, etc. Relating to the coal ash, Engineering characteristics of the improved soil by deep mixing method using coal ash, Employment of fluidized bed ash as a basecourse material, On-site verification trials using fly ash for reclamation behind bulkheads, Water permeabilities of pulverized fuel ash, Separation of unburned carbon from coal fly ash through froth flotation, Practical use technology of coal ash (POZ-O-TEC), etc

PCARRD`s strategies for technology transfer: The agriculture and resources regional technology information system and the regional applied communication program

Energy Technology Data Exchange (ETDEWEB)

Stuart, T H; Mamon, C R [Philippine Council for Agriculture, Los Banos, Laguna (Philippines). Forestry and Natural Resources

1990-05-01

This paper describes the Agriculture and Resources Regional Technology Information System (ARRTIS) and the Regional Applied Communication Outreach Program (RAC) of PCARRD. The ARRTIS and the RACO are the strategies in communicating scientific and technology-based information. The ARRTIS is an information system that provides an information base on the status of technologies at various levels of maturity (generation, adaptation, verification, piloting, dissemination and utilization) and offers technology alternatives based on environmental requirements, costs and returns analysis or feasibility of the technologies. This information base provides the repository of technology information from which the Applied Communication Program draws its information for packaging into various formats, using various strategies/media to cater to various users in the regions most especially the farmers. Meanwhile, as PCARRD executes its mission of developing the national research system, it incorporates a development support communication program through the RACO. The RACO is essentially a working component of a regional research center/consortium in each region coordinated by the Applied Communication Division of PCARRD. It aims at reaching farmers and their families, extensionists, administrators, policy makers and entrepreneurs with research information and technology which use a variety of appropriate communication channels, modern communication technology and strategies so that they may actively participate in research diffusion and utilization. (author). 7 refs.

Electric utility companies and geothermal power

Science.gov (United States)