WorldWideScience

Sample records for technology unit assessing

  1. GUIDING PRINCIPLES FOR GOOD PRACTICES IN HOSPITAL-BASED HEALTH TECHNOLOGY ASSESSMENT UNITS.

    Science.gov (United States)

    Sampietro-Colom, Laura; Lach, Krzysztof; Pasternack, Iris; Wasserfallen, Jean-Blaise; Cicchetti, Americo; Marchetti, Marco; Kidholm, Kristian; Arentz-Hansen, Helene; Rosenmöller, Magdalene; Wild, Claudia; Kahveci, Rabia; Ulst, Margus

    2015-01-01

    Health technology assessment (HTA) carried out for policy decision making has well-established principles unlike hospital-based HTA (HB-HTA), which differs from the former in the context characteristics and ways of operation. This study proposes principles for good practices in HB-HTA units. A framework for good practice criteria was built inspired by the EFQM excellence business model and information from six literature reviews, 107 face-to-face interviews, forty case studies, large-scale survey, focus group, Delphi survey, as well as local and international validation. In total, 385 people from twenty countries have participated in defining the principles for good practices in HB-HTA units. Fifteen guiding principles for good practices in HB-HTA units are grouped in four dimensions. Dimension 1 deals with principles of the assessment process aimed at providing contextualized information for hospital decision makers. Dimension 2 describes leadership, strategy and partnerships of HB-HTA units which govern and facilitate the assessment process. Dimension 3 focuses on adequate resources that ensure the operation of HB-HTA units. Dimension 4 deals with measuring the short- and long-term impact of the overall performance of HB-HTA units. Finally, nine core guiding principles were selected as essential requirements for HB-HTA units based on the expertise of the HB-HTA units participating in the project. Guiding principles for good practices set up a benchmark for HB-HTA because they represent the ideal performance of HB-HTA units; nevertheless, when performing HTA at hospital level, context also matters; therefore, they should be adapted to ensure their applicability in the local context.

  2. Needs assessment for remote systems technology at the Chornobyl Unit 4 shelter

    International Nuclear Information System (INIS)

    Carteret, B.A.; Holliday, M.A.; Jones, E.D.

    1997-12-01

    The accident at Chornobyl Unit 4 on April 26, 1986, resulted in a series of unprecedented scientific and technical challenges. The reactor building was damaged extensively. Following the accident, immediate action was needed to seal off the gaping crater created by the accident, which was a continuing source of airborne contamination. Under extreme conditions, a structure called the open-quotes Shelterclose quotes was built over the remains of the reactor building. The Shelter, which was quickly completed in November 1986, was meant to provide immediate but temporary containment. Now, 11 years later, there are significant concerns about its structural integrity and projected life expectancy. The United States and other participating G-7 countries are supporting nuclear safety upgrade efforts in Eastern Europe with a primary focus on placing the Chornobyl Nuclear Power Plant (ChNPP) Unit 4 Shelter in a stable and environmentally acceptable condition. Application of remote systems technologies will play an important part in achieving the goals of this program. The G-7 nations have agreed to support these efforts, including the identification and development of remote system technologies for fuel removal. However at this time they have taken a firm stance against funding actual fuel removal activities. The U.S. Department of Energy Office of Nuclear Energy, Science and Technology requested that a needs assessment be performed to evaluate the requirements for applying remote systems, including robotics, at the Shelter. This document is intended to be used to identify remote systems needs and requirements at the Shelter and to provide general information on the conditions in the Shelter that could impact the use of remote systems. This document is intended as a source of information to assist those who will be implementing the Shelter Implementation Plan tasks. The document provides background information and general guidance on the application of remote systems

  3. Information needs of health technology assessment units and agencies in Spain.

    Science.gov (United States)

    Galnares-Cordero, Lorea; Gutiérrez-Ibarluzea, Iñaki

    2010-10-01

    The aim of this study was to analyze the information needs of Spanish health technology assessment (HTA) agencies and units to facilitate access to the resources they require to substantiate their reports. A questionnaire was designed and distributed among HTA bodies to ascertain the actual situation of subscriptions to information resources and what information specialists from these bodies considered would be the ideal subscription situation. Their information needs were then studied, and the resources that best met these needs were put forward. Following this definition, a subscriptions policy was adopted with suppliers and publishers. The survey showed that HTA bodies share a minimum of core subscriptions that includes open sources (MEDLINE, DARE) and sources that the government subscribes to for the health community (ISI Web of Science, Cochrane Library Plus). There was no common approach to determining which databases to subscribe to (UpToDate, EMBASE, Ovid EBMR, CINAHL, or ECRI). After identifying the information needs, a list of resources was proposed that would best cover these needs and, of these, subscription to the following was proposed: Scopus, Ovid EBMR, Clinical Evidence, DynaMed, ECRI, and Hayes. There are differences in the way that HTA agencies and units access the different resources of biomedical information. Combined subscription to several resources for documentation services was suggested as a way of resolving these differences.

  4. Assessing the level of healthcare information technology adoption in the United States: a snapshot

    Directory of Open Access Journals (Sweden)

    Middleton Blackford

    2006-01-01

    Full Text Available Abstract Background Comprehensive knowledge about the level of healthcare information technology (HIT adoption in the United States remains limited. We therefore performed a baseline assessment to address this knowledge gap. Methods We segmented HIT into eight major stakeholder groups and identified major functionalities that should ideally exist for each, focusing on applications most likely to improve patient safety, quality of care and organizational efficiency. We then conducted a multi-site qualitative study in Boston and Denver by interviewing key informants from each stakeholder group. Interview transcripts were analyzed to assess the level of adoption and to document the major barriers to further adoption. Findings for Boston and Denver were then presented to an expert panel, which was then asked to estimate the national level of adoption using the modified Delphi approach. We measured adoption level in Boston and Denver was graded on Rogers' technology adoption curve by co-investigators. National estimates from our expert panel were expressed as percentages. Results Adoption of functionalities with financial benefits far exceeds adoption of those with safety and quality benefits. Despite growing interest to adopt HIT to improve safety and quality, adoption remains limited, especially in the area of ambulatory electronic health records and physician-patient communication. Organizations, particularly physicians' practices, face enormous financial challenges in adopting HIT, and concerns remain about its impact on productivity. Conclusion Adoption of HIT is limited and will likely remain slow unless significant financial resources are made available. Policy changes, such as financial incentivesto clinicians to use HIT or pay-for-performance reimbursement, may help health care providers defray upfront investment costs and initial productivity loss.

  5. Guiding principles for good practices in hospital-based health technology assessment units

    DEFF Research Database (Denmark)

    Sampietro-Colom, Laura; Lach, Krzysztof; Pasternack, Iris

    2015-01-01

    OBJECTIVES: Health technology assessment (HTA) carried out for policy decision making has well-established principles unlike hospital-based HTA (HB-HTA), which differs from the former in the context characteristics and ways of operation. This study proposes principles for good practices in HB-HTA...

  6. United States advanced technologies

    International Nuclear Information System (INIS)

    Longenecker, J.R.

    1985-01-01

    In the United States, the advanced technologies have been applied to uranium enrichment as a means by which it can be assured that nuclear fuel cost will remain competitive in the future. The United States is strongly committed to the development of advanced enrichment technology, and has brought both advanced gas centrifuge (AGC) and atomic vapor laser isotope separation (AVLIS) programs to a point of significant technical refinement. The ability to deploy advanced technologies is the basis for the confidence in competitive future price. Unfortunately, the development of advanced technologies is capital intensive. The year 1985 is the key year for advanced technology development in the United States, since the decision on the primary enrichment technology for the future, AGC or AVLIS, will be made shortly. The background on the technology selection process, the highlights of AGC and AVLIS programs and the way to proceed after the process selection are described. The key objective is to maximize the sales volume and minimize the operating cost. This will help the utilities in other countries supply low cost energy on a reliable, long term basis. (Kako, I.)

  7. Decontamination technology assessment

    International Nuclear Information System (INIS)

    Allen, R.P.; Konzek, G.J.; Schneider, K.R.; Smith, R.I.

    1988-10-01

    This study identifies and technically assesses foreign decontamination and decommissioning (D and D) technology developments that may represent significant improvements over D and D technology currently available or under development in the United States. Technology need areas for nuclear power reactor decommissioning operations were identified and prioritized using the results of past light water reactor (LWR) decommissioning studies to quantitatively evaluate the potential for reducing cost and decommissioning worker radiation dose for each major decommissioning activity. Based on these identified needs, current foreign D and D technologies of potential interest to the US were identified through personal contacts and the collection and review of an extensive body of D and D literature. These technologies were then assessed qualitatively to evaluate their uniqueness, potential for a significant reduction in D and D costs and/or worker radiation dose, development status, and other factors affecting their value and applicability to US needs. 4 refs

  8. Technology assessments

    International Nuclear Information System (INIS)

    Rohwer, P.S.; Anderson, D.L.; Christian, D.J.

    1978-01-01

    Theoretical studies in assessment methodology have concentrated in the past year on computerization of state-of-the-art models for internal radiation dosimetry and development and evaluation of environmental transport models. Methodology applications continued to cover a broad spectrum of radiation exposure scenarios. Potential exposure situations requiring assessment arise from assorted deployments of all parts of nuclear fuel cycles, including comparisons of alternative uranium and thorium based cycles, and preliminary evaluations of advanced reactor fuel concepts. Measurements and samples were collected characterizing and documenting the current radiological status of formerly used Manhattan Engineer District/Atomic Energy Commission (MED/AEC) sites. This survey program encompasses research activities in the areas of survey design, instrumentation development, sample analysis, and data reduction and analysis. Other laboratory activities within TAS center around the unique capabilities of the Health Physics Research Reactor (HPRR) as an irradiation source. Typically the HPRR was involved in testing and intercomparison of dosimetry and criticality alarm systems and in exposure of physical and biological experiments

  9. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  10. Decontamination technology assessment

    International Nuclear Information System (INIS)

    Allen, R.P.; Konzek, G.J.; Schneider, K.J.; Smith, R.I.

    1988-01-01

    This study was conducted by the Pacific Northwest Laboratory (PNL) for the U.S. Department of Energy (DOE) to identify and technically assess foreign decontamination and decommissioning (D and D) technology developments that may represent significant improvements over D and D technology currently available or under development in the United States. Technology need areas for nuclear power reactor decommissioning operations were identified and prioritized using the results of past light water rector (LWR) decommissioning studies to quantitatively evaluate the potential for reducing cost and decommissioning worker radiation dose for each major decommissioning activity. Based on these identified needs, current foreign D and D technologies of potential interest to the U.S. were identified through personal contacts and the collection and review of an extensive body of D and D literature. These technologies were then assessed qualitatively to evaluate their uniqueness, potential for a significant reduction in D and D costs and/or worker radiation dose, development status, and other factors affecting their value and applicability to U.S. needs

  11. Construction and validation of a tool to Assess the Use of Light Technologies at Intensive Care Units.

    Science.gov (United States)

    Marinho, Pabliane Matias Lordelo; Campos, Maria Pontes de Aguiar; Rodrigues, Eliana Ofélia Llapa; Gois, Cristiane Franca Lisboa; Barreto, Ikaro Daniel de Carvalho

    2016-12-19

    to construct and validate a tool to assess the use of light technologies by the nursing team at Intensive Care Units. methodological study in which the tool was elaborated by means of the psychometric method for construction based on the categorization of health technologies by Merhy and Franco, from the National Humanization Policy, using the Nursing Intervention Classification taxonomy to categorize the domains of the tool. Agreement Percentages and Content Validity Indices were used for the purpose of validation. The result of the application of the Interrater Agreement Percentage exceeded the recommended level of 80%, highlighting the relevance for the proposed theme in the assessment, with an agreement rate of 99%. the tool was validated with four domains (Bond, Autonomy, Welcoming and Management) and nineteen items that assess the use of light technologies at Intensive Care Units. construir e validar um instrumento para avaliação do uso de tecnologias leves, pela equipe de enfermagem, em Unidades de Terapia Intensiva. estudo metodológico no qual o instrumento foi elaborado utilizando o método psicométrico para construção com base na categorização das tecnologias em saúde de Merhy e Franco, da Política Nacional de Humanização, utilizando-se a taxonomia Nursing Intervention Classification para categorizar os domínios do instrumento. Utilizou-se o Percentual de Concordância e o Índice de Validade de Conteúdo (IVC) para validação. o resultado da aplicação do Percentual de Concordância entre os juízes foi superior ao recomendado de 80%, havendo destaque na avaliação da pertinência ao tema proposto, apresentando um percentual de concordância de 99%. o instrumento foi validado com quatro domínios (Vínculo, Autonomia, Acolhimento e Gestão) e dezenove itens que avaliam o uso das tecnologias leves em Unidade de Terapia Intensiva. construir y validar un instrumento para evaluación del uso de tecnologías leves, por el equipo de enfermer

  12. Assessing for Technological Literacy

    Science.gov (United States)

    Engstrom, Daniel E.

    2004-01-01

    Designing standards-based assessment is a key component of a quality technology education program. For students to become technologically literate, it is important that the teacher understands how to measure student understandings and abilities in the study of technology. This article is written to help teachers and teacher educators recognize the…

  13. Superconducting Technology Assessment

    National Research Council Canada - National Science Library

    2005-01-01

    This Superconducting Technology Assessment (STA) has been conducted by the National Security Agency to address the fundamental question of a potential replacement for silicon complementary metal oxide semiconductor (CMOS...

  14. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. [ed.

    1992-01-01

    This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  15. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. (ed.)

    1992-01-01

    This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  16. Information Technology Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

  17. Evidence-based practice center network and health technology assessment in the United States: bridging the cultural gap.

    Science.gov (United States)

    Sarría-Santamera, Antonio; Matchar, David B; Westermann-Clark, Emma V; Patwardhan, Meenal B

    2006-01-01

    The purpose of this study was to identify the Evidence-Based Practice Center (EPC) network participants' perceptions of the characteristics of the EPC process and the relationship of the process to the success of EPC reports. Semistructured interviews were conducted with the three groups involved in the EPC: EPC staff, Agency for Healthcare Research and Quality (AHRQ) staff, and representatives of partner organizations. The analysis of the coded transcripts revealed three related major themes, which form the conceptual basis for the interpretation presented here: the definition of a successful report, the determinants of a successful report, and the role of AHRQ in the process. A successful report is a report that is used. The ultimate success of the core health technology assessment objective, moving from research to policy, depends on balancing two values: excellence and relevance. Our findings are consistent with the "two communities thesis," which postulates the existence of two camps that confer different values to excellence and relevance, with resulting tension. A promising model for approaching this tension is integration or collaboration, which requires linking researchers and policy makers, promoting productive dialogues about the formulation and timing of analysis, and early consideration of how the resulting analysis will be used. This effort suggests that actively blurring the frontiers between these two groups will enhance their interaction. Furthermore, enhancing the role of the AHRQ as scientific broker will maximize the potential of the EPC network.

  18. Turbine imaging technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Moursund, R. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2004-12-01

    The goal of this project was to identify and evaluate imaging technologies for observing juvenile fish within a Kaplan turbine, and specifically that would enable scientists to determine mechanisms of fish injury within an operating turbine unit. This report documents the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. These observations were used to make modifications to dam structures and operations to improve conditions for fish passage while maintaining or improving hydropower production. The physical and hydraulic environment that fish experience as they pass through the hydroelectric plants were studied and the regions with the greatest potential for injury were defined. Biological response data were also studied to determine the probable types of injuries sustained in the turbine intake and what types of injuries are detectable with imaging technologies. The study grouped injury-causing mechanisms into two categories: fluid (pressure/cavitation, shear, turbulence) and mechanical (strike/collision, grinding/pinching, scraping). The physical constraints of the environment, together with the likely types of injuries to fish, provided the parameters needed for a rigorous imaging technology evaluation. Types of technology evaluated included both tracking and imaging systems using acoustic technologies (such as sonar and acoustic tags) and optic technologies (such as pulsed-laser videography, which is high-speed videography using a laser as the flash). Criteria for determining image data quality such as frame rate, target detectability, and resolution were used to quantify the minimum requirements of an imaging sensor.

  19. Technologies for Language Assessment.

    Science.gov (United States)

    Burstein, Jill; And Others

    1996-01-01

    Reviews current and developing technology uses that are relevant to language assessment and discusses examples of recent linguistic applications from the laboratory at the Educational Testing Service. The processes of language test development are described and the functions they serve from the perspective of a large testing organization are…

  20. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Loken, S.C. [ed.

    1993-01-01

    The emphasis in Information Technology (IT) development has shifted from technology management to information management, and the tools of information management are increasingly at the disposal of end-users, people who deal with information. Moreover, the interactive capabilities of technologies such as hypertext, scientific visualization, virtual reality, video conferencing, and even database management systems have placed in the hands of users a significant amount of discretion over how these resources will be used. The emergence of high-performance networks, as well as network operating systems, improved interoperability, and platform independence of applications will eliminate technical barriers to the use of data, increase the power and range of resources that can be used cooperatively, and open up a wealth of possibilities for new applications. The very scope of these prospects for the immediate future is a problem for the IT planner or administrator. Technology procurement and implementation, integration of new technologies into the existing infrastructure, cost recovery and usage of networks and networked resources, training issues, and security concerns such as data protection and access to experiments are just some of the issues that need to be considered in the emerging IT environment. As managers we must use technology to improve competitiveness. When procuring new systems, we must take advantage of scalable resources. New resources such as distributed file systems can improve access to and efficiency of existing operating systems. In addition, we must assess opportunities to improve information worker productivity and information management through tedmologies such as distributed computational visualization and teleseminar applications.

  1. SI units in engineering and technology

    CERN Document Server

    Qasim, S H

    2016-01-01

    SI Units in Engineering and Technology focuses on the use of the International System of Units-Systeme International d'Unités (SI). The publication first elaborates on the SI, derivation of important engineering units, and derived SI units in science and engineering. Discussions focus on applied mechanics in mechanical engineering, electrical and magnetic units, stress and pressure, work and energy, power and force, and magnitude of SI units. The text then examines SI units conversion tables and engineering data in SI units. Tables include details on the sectional properties of metals in SI units, physical properties of important molded plastics, important physical constants expressed in SI units, and temperature, area, volume, and mass conversion. Tables that show the mathematical constants, standard values expressed in SI units, and Tex count conversion are also presented. The publication is a dependable source of data for researchers interested in the use of the International System of Units-Systeme Inter...

  2. Heat recovery from UPS units - Analysis of a first unit and technology assessment; Waermerueckgewinnung in USV-Anlagen. Analyse einer Erstanlage und Potentialabschaetzung

    Energy Technology Data Exchange (ETDEWEB)

    Stahl, S.; Schlegel, A.

    2009-11-15

    UPS units (uninterruptible power supply) generate large heat losses, which have to be dissipated with cooling units. awtec has developed a unique UPS system with integrated heat recovery which was installed in 2001 (Building Gretag/SAP in Regensdorf) and which is still running error-free. With this system the waste heat can be recovered and electrical energy for the refrigeration system can be saved likewise. The measured data shows that during the heating season, the unit transfers virtually all heat loss (about 20 MWh/year) to the space heating system. The building's refrigeration system, however, has its own heat recovery system, so the actual annual energy savings can be estimated to be only about 4 MWh of electricity. The prototype shows that awtec built a robust unit which - given an appropriate cooling and heating system - has the potential for high energy savings (without central heat recovery system: 4 MWh electric + 20 MWh thermal) without increased investment. Based on the UPS heat recovery development, previous projects of the Swiss Federal Office of Energy and a market survey, scenarios for the cooling and heat recovery from UPS units were developed. Since the same concepts also apply to the cooling of servers and other IT components, they were also included in the analysis. The scenario analysis shows that a high potential for savings of electric energy and heat exists in this area. In particular, the direct cooling of the IT components with cooling water offers big benefits for heat recovery and free cooling (cooling without the use of the refrigeration system) compared to conventional air cooling. These direct cooling systems are currently mainly used for special applications or as a fallback in case of overheating problems. Passive cooling through geothermal probes, which are now mainly used for buildings with small heat pump systems, provides an interesting approach to the cooling of IT equipment in accordance with the temperature level. It

  3. Information Technology and Literacy Assessment.

    Science.gov (United States)

    Balajthy, Ernest

    2002-01-01

    Compares technology predictions from around 1989 with the technology of 2002. Discusses the place of computer-based assessment today, computer-scored testing, computer-administered formal assessment, Internet-based formal assessment, computerized adaptive tests, placement tests, informal assessment, electronic portfolios, information management,…

  4. The United States Department of Energy Office of Industrial Technology`s Technology Benefits Recording System

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, K.R.; Moore, N.L.

    1994-09-01

    The U.S. Department of Energy (DOE) Office of Industrial Technology`s (OIT`s) Technology Benefits Recording System (TBRS) was developed by Pacific Northwest Laboratory (PNL). The TBRS is used to organize and maintain records of the benefits accrued from the use of technologies developed with the assistance of OIT. OIT has had a sustained emphasis on technology deployment. While individual program managers have specific technology deployment goals for each of their ongoing programs, the Office has also established a separate Technology Deployment Division whose mission is to assist program managers and research and development partners commercialize technologies. As part of this effort, the Technology Deployment Division developed an energy-tracking task which has been performed by PNL since 1977. The goal of the energy-tracking task is to accurately assess the energy savings impact of OIT-developed technologies. In previous years, information on OIT-sponsored technologies existed in a variety of forms--first as a hardcopy, then electronically in several spreadsheet formats that existed in multiple software programs. The TBRS was created in 1993 for OIT and was based on information collected in all previous years from numerous industrial contacts, vendors, and plants that have installed OIT-sponsored technologies. The TBRS contains information on technologies commercialized between 1977 and the present, as well as information on emerging technologies in the late development/early commercialization stage of the technology life cycle. For each technology, details on the number of units sold and the energy saved are available on a year-by-year basis. Information regarding environmental benefits, productivity and competitiveness benefits, or impact that the technology may have had on employment is also available.

  5. Approaches to Assessing Technological Literacy

    Science.gov (United States)

    Pearson, Greg

    2006-01-01

    It is the conclusion of the Committee on Assessing Technological Literacy, a study panel appointed by the National Academy of Engineering and the National Research Council, that very little is known about what children or adults know, can do, and believe about technology. This is because the state of assessment related to technology--or, …

  6. Technology assessment for the anesthesiologist.

    Science.gov (United States)

    Abenstein, J P

    2006-12-01

    The expense associated with modern heath care in the United States is very high, in excess of 15% of the GDP, continues to grow and has become a significant public policy issue. New technologies, defined as all drugs, devices, procedures, and organizational systems, are major contributors to rising health care costs. The use of health technology assessment tools can assist those in leadership positions in making rational decisions as to which new technologies to adopt. The classical approach is to use data from prospective, randomized, clinical trials that compare the outcomes of those treated with the new technology and the accepted therapy. Using this information and detailed economic data, the cost-effectiveness ratio can be determined. The accepted metrics are either dollars per life year saved or dollars per quality-adjusted life year saved. If the new medical intervention costs less than $50,000 to 80,000 dollars per life year saved, it is considered to be cost-effective and worthy of adoption. This kind of analysis is complex and expensive. In addition, the required information is not always available, limiting the applicability of this approach. Finally, the economic analysis often includes down-stream expense and benefit not relevant from a medical center perspective. Another approach is to focus the analysis to what impacts the medical center. This includes determining whether the technology has received the necessary approvals and has been shown to be effective, to improve health outcomes, to be at least as effective as standard therapy, and to be achievable outside the investigative setting. A fiscal analysis also must be done to determine what will it cost to acquire and operate the technology, what are the anticipated patient volumes and payer mix, and what will be the down-stream consequences to the medical center. If the process concludes that the technology works, makes a positive difference to patient care, and is fiscally and operationally

  7. Technology Performance Level Assessment Methodology.

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph; Costello, Ronan Patrick; Aurelien Babarit; Kim Nielsen; Claudio Bittencourt Ferreira; Ben Kennedy; Kathryn Dykes; Jochem Weber

    2017-04-01

    The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within the TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.

  8. Melter Technologies Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Perez, J.M. Jr. [Pacific Northwest National Lab., Richland, WA (United States); Schumacher, R.F. [Savannah River Technology Center, Aiken, SC (United States); Forsberg, C.W. [Oak Ridge National Lab., TN (United States)

    1996-05-01

    The problem of controlling and disposing of surplus fissile material, in particular plutonium, is being addressed by the US Department of Energy (DOE). Immobilization of plutonium by vitrification has been identified as a promising solution. The Melter Evaluation Activity of DOE`s Plutonium Immobilization Task is responsible for evaluating and selecting the preferred melter technologies for vitrification for each of three immobilization options: Greenfield Facility, Adjunct Melter Facility, and Can-In-Canister. A significant number of melter technologies are available for evaluation as a result of vitrification research and development throughout the international communities for over 20 years. This paper describes an evaluation process which will establish the specific requirements of performance against which candidate melter technologies can be carefully evaluated. Melter technologies that have been identified are also described.

  9. Rapid Technology Assessment Framework for Land Logistics

    Science.gov (United States)

    2015-03-01

    Economy, Environment, Politics SWOT Strengths, Weaknesses, Opportunities, Threats TRL Technology Readiness Level US United States WHO World Health...process fills one with the hope of great things to come. From 3-D printed organs to self-assembling asteroid -mining robots, the solution to all the...one to assess the relevant advantages of the new technologies compared to the current systems. For example, if we are considering investment in a

  10. ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY

    Science.gov (United States)

    2017-08-01

    AFRL-RY-WP-TR-2017-0167 ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY Burhan Bayraktaroglu Devices for Sensing Branch Aerospace...TITLE AND SUBTITLE ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER N/A 6...report summarizes the current status of the Ga2O3 technology based on published results on theoretical electronic structure, materials growth, and

  11. Technology assessment of thermal treatment technologies using ORWARE

    International Nuclear Information System (INIS)

    Assefa, G.; Eriksson, O.; Frostell, B.

    2005-01-01

    A technology assessment of thermal treatment technologies for wastes was performed in the form of scenarios of chains of technologies. The Swedish assessment tool, ORWARE, was used for the assessment. The scenarios of chains of thermal technologies assessed were gasification with catalytic combustion, gasification with flame combustion, incineration and landfilling. The landfilling scenario was used as a reference for comparison. The technologies were assessed from ecological and economic points of view. The results are presented in terms of global warming potential, acidification potential, eutrophication potential, consumption of primary energy carriers and welfare costs. From the simulations, gasification followed by catalytic combustion with energy recovery in a combined cycle appeared to be the most competitive technology from an ecological point of view. On the other hand, this alternative was more expensive than incineration. A sensitivity analysis was done regarding electricity prices to show which technology wins at what value of the unit price of electricity (SEK/kW h). Within this study, it was possible to make a comparison both between a combined cycle and a Rankine cycle (a system pair) and at the same time between flame combustion and catalytic combustion (a technology pair). To use gasification just as a treatment technology is not more appealing than incineration, but the possibility of combining gasification with a combined cycle is attractive in terms of electricity production. This research was done in connection with an empirical R and D work on both gasification of waste and catalytic combustion of the gasified waste at the Division of Chemical Technology, Royal Institute of Technology (KTH), Sweden

  12. Turbine Imaging Technology Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Moursund, Russell A.; Carlson, Thomas J.

    2004-12-31

    The goal of this project was to identify and evaluate imaging alternatives for observing the behavior of juvenile fish within an operating Kaplan turbine unit with a focus on methods to quantify fish injury mechanisms inside an operating turbine unit. Imaging methods are particularly needed to observe the approach and interaction of fish with turbine structural elements. This evaluation documents both the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. The information may be used to acquire the scientific knowledge to make structural improvements and create opportunities for industry to modify turbines and improve fish passage conditions.

  13. Turbine Imaging Technology Assessment

    International Nuclear Information System (INIS)

    Moursund, Russell A.; Carlson, Thomas J.

    2004-01-01

    The goal of this project was to identify and evaluate imaging alternatives for observing the behavior of juvenile fish within an operating Kaplan turbine unit with a focus on methods to quantify fish injury mechanisms inside an operating turbine unit. Imaging methods are particularly needed to observe the approach and interaction of fish with turbine structural elements. This evaluation documents both the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. The information may be used to acquire the scientific knowledge to make structural improvements and create opportunities for industry to modify turbines and improve fish passage conditions

  14. Sludge technology assessment

    International Nuclear Information System (INIS)

    Krause, T.R.; Cunnane, J.C.; Helt, J.E.

    1994-12-01

    The retrieval, processing, and generation of final waste forms from radioactive tank waste sludges present some of the most challenging technical problems confronting scientists and engineers responsible for the waste management programs at the various Department of Energy laboratories and production facilities. Currently, the Department of Energy is developing a strategy to retrieve, process, and generate a final waste form for the sludge that meets the acceptance criteria for the final disposition. An integral part of this strategy will be use of separation processes that treat the sludge; the goal is to meet feed criteria for the various processes that will generate the final waste form, such as vitrification or grouting. This document is intended to (1) identify separation technologies which are being considered for sludge treatment at various DOE sites, (2) define the current state of sludge treatment technology, (3) identify what research and development is required, (4) identify current research programs within either DOE or academia developing sludge treatment technology, and (5) identify commercial separation technologies which may be applicable. Due to the limited scope of this document, technical evaluations regarding the need for a particular separations technology, the current state of development, or the research required for implementation, are not provided

  15. Ion exchange technology assessment report

    International Nuclear Information System (INIS)

    Duhn, E.F.

    1992-01-01

    In the execution of its charter, the SRS Ion Exchange Technology Assessment Team has determined that ion exchange (IX) technology has evolved to the point where it should now be considered as a viable alternative to the SRS reference ITP/LW/PH process. The ion exchange media available today offer the ability to design ion exchange processing systems tailored to the unique physical and chemical properties of SRS soluble HLW's. The technical assessment of IX technology and its applicability to the processing of SRS soluble HLW has demonstrated that IX is unquestionably a viable technology. A task team was chartered to evaluate the technology of ion exchange and its potential for replacing the present In-Tank Precipitation and proposed Late Wash processes to remove Cs, Sr, and Pu from soluble salt solutions at the Savannah River Site. This report documents the ion exchange technology assessment and conclusions of the task team

  16. Inquiries and technological assessment

    International Nuclear Information System (INIS)

    1981-01-01

    The authors examine six Canadian inquiries to determine their values as scientific assessments, their ability to combine scientific data with policy considerations, and their effectiveness in extending public debate on scientific issues. Among the inquiries examined are the environmental assessment hearings into the Point Lepreau nuclear generating station, the Bayda inquiry into the Cluff Lake uranium mine, and the Porter commission on electric power planning in Ontario

  17. Risk assessment research and technology assessment

    International Nuclear Information System (INIS)

    Albach, H.; Schade, D.; Sinn, H.

    1991-01-01

    The concepts and approaches for technology assessment, the targets and scientific principles, as well as recognizable deficits and recommendations concerning purposeful strategies for the promotion of this research field require a dialog between those concerned. Conception, deficits, and the necessary measures for risk assessment research and technology assessment were discussed as well as ethical aspects. The problematic nature of using organisms altered through genetic engineering in the open land, traffic and transport, site restoration, nuclear energy, and isotope applications were subjects particularly dealt with. (DG) [de

  18. PACS/IMAC technology assessment

    OpenAIRE

    Schilling, Ronald B.

    1997-01-01

    According to Peter Ogle of Digital Imaging (San Francisco, CA), “Radiologists should help identify common values for the use of information technology in medicine.” Achieving a set of common values often requires a framework for organizing the thought process involved. That is the focus of this article in addressing the subject of picture archiving and communication system (PACS) technology assessment.

  19. Health technology assessment in Finland

    DEFF Research Database (Denmark)

    Mäkelä, Marjukka; Roine, Risto P

    2010-01-01

    Since the 1990s, health policy makers in Finland have been supportive of evidence-based medicine and approaches to implement its results. The Finnish Office for Health Technology Assessment (Finohta) has grown from a small start in 1995 to a medium-sized health technology assessment (HTA) agency,...... findings. The Managed Uptake of Medical Methods program links the hospital districts to agree on introduction of technologies. The Ohtanen database provides Finnish-language summaries of major assessments made in other countries.......Since the 1990s, health policy makers in Finland have been supportive of evidence-based medicine and approaches to implement its results. The Finnish Office for Health Technology Assessment (Finohta) has grown from a small start in 1995 to a medium-sized health technology assessment (HTA) agency......, with special responsibility in providing assessments to underpin national policies in screening. External evaluations enhanced the rapid growth. In the Finnish environment, decision making on health technologies is extremely decentralized, so Finohta has developed some practical tools for implementing HTA...

  20. Knowledge in health technology assessment

    DEFF Research Database (Denmark)

    Tjørnhøj-Thomsen, Tine; Hansen, Helle Ploug

    2011-01-01

    Health systems are placing more and more emphasis on designing and delivering services that are focused on the patient, and there is a growing interest in patient aspects of health policy research and health technology assessment (HTA). Only a few HTA agencies use and invest in scientific methods...... to generate knowledge and evidence about the patient aspects of a given technology. This raises questions about how knowledge is produced in HTA reports and what kind of knowledge is considered relevant. This article uses a Danish HTA on patient education from 2009 as empirical material for a critical...

  1. Augmented Reality Tower Technology Assessment

    Science.gov (United States)

    Reisman, Ronald J.; Brown, David M.

    2009-01-01

    Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

  2. Q46 Technology Refreshment Assessment

    Science.gov (United States)

    Garcia-Burgos, Axel A.

    2010-01-01

    This document reviews the accomplishments of the author during an internship. During this internship, the author was assigned to the End User Services Office, which coordinates and oversees a wide selection of information technologies that enhance the productivity of the workforce at NASA Kennedy Space Center. During the internship the author performed an assessment of the work of the Outsourcing Desktop Initiative for NASA (ODIN) contract.

  3. Carbon Capture: A Technology Assessment

    Science.gov (United States)

    2013-10-21

    whereas laboratory-scale experiments typically seek to validate or obtain data for specific components of a system. Laboratory- and bench-scale processes...Plant,” Energy, vol. 35 (2010), pp. 841-850. E. Favre, R. Bounaceur, and D. Roizard, “ Biogas , Membranes and Carbon Dioxide Capture,” Journal of...pp. 1-49. 64 Favre, “ Biogas , Membranes.” Carbon Capture: A Technology Assessment Congressional Research Service 42 materials have pore sizes

  4. Health technology assessment in Mexico.

    Science.gov (United States)

    Gómez-Dantés, Octavio; Frenk, Julio

    2009-07-01

    The history of health technology assessment (HTA) in Mexico is examined, starting with the efforts to incorporate this topic into the policy agenda and culminating with the recent creation of a specialized public agency. Information was gathered through a bibliographic search and interviews with actors involved in HTA in Mexico. HTA efforts were developed in Mexico since the mid-1980s with the participation both of academics and of policy makers, a relationship that eventually led to the creation of the Center for Technological Excellence within the Ministry of Health. Institutionalization of HTA in resource-constrained settings requires the development of a critical mass of researchers involved in this field, the implementation of information efforts, and the establishment of strong relationships between HTA experts and policy makers.

  5. Technology assessment of automation trends in the modular home industry

    Science.gov (United States)

    Phil Mitchell; Robert Russell Hurst

    2009-01-01

    This report provides an assessment of technology used in manufacturing modular homes in the United States, and that used in the German prefabricated wooden home industry. It is the first step toward identifying the research needs in automation and manufacturing methods that will facilitate mass customization in the home manufacturing industry. Within the United States...

  6. HVDC power transmission technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hauth, R.L.; Tatro, P.J.; Railing, B.D. [New England Power Service Co., Westborough, MA (United States); Johnson, B.K.; Stewart, J.R. [Power Technologies, Inc., Schenectady, NY (United States); Fink, J.L.

    1997-04-01

    The purpose of this study was to develop an assessment of the national utility system`s needs for electric transmission during the period 1995-2020 that could be met by future reduced-cost HVDC systems. The assessment was to include an economic evaluation of HVDC as a means for meeting those needs as well as a comparison with competing technologies such as ac transmission with and without Flexible AC Transmission System (FACTS) controllers. The role of force commutated dc converters was to be assumed where appropriate. The assessment begins by identifying the general needs for transmission in the U.S. in the context of a future deregulated power industry. The possible roles for direct current transmission are then postulated in terms of representative scenarios. A few of the scenarios are illustrated with the help of actual U.S. system examples. non-traditional applications as well as traditional applications such as long lines and asynchronous interconnections are discussed. The classical ``break-even distance`` concept for comparing HVDC and ac lines is used to assess the selected scenarios. The impact of reduced-cost converters is reflected in terms of the break-even distance. This report presents a comprehensive review of the functional benefits of HVDC transmission and updated cost data for both ac and dc system components. It also provides some provocative thoughts on how direct current transmission might be applied to better utilize and expand our nation`s increasingly stressed transmission assets.

  7. Assessment of Motor Units in Neuromuscular Disease.

    Science.gov (United States)

    Henderson, Robert D; McCombe, Pamela A

    2017-01-01

    The motor unit comprises the anterior horn cell, its axon, and the muscle fibers that it innervates. Although the true number of motor units is unknown, the number of motor units appears to vary greatly between different muscles and between different individuals. Assessment of the number and function of motor units is needed in diseases of the anterior horn cell and other motor nerve disorders. Amyotrophic lateral sclerosis is the most important disease of anterior horn cells. The need for an effective biomarker for assessing disease progression and for use in clinical trials in amyotrophic lateral sclerosis has stimulated the study of methods to measure the number of motor units. Since 1970 a number of different methods, including the incremental, F-wave, multipoint, and statistical methods, have been developed but none has achieved widespread applicability. Two methods (MUNIX and the multipoint incremental method) are in current use across multiple centres and are discussed in detail in this review, together with other recently published methods. Imaging with magnetic resonance and ultrasound is increasingly being applied to this area. Motor unit number estimates have also been applied to other neuromuscular diseases such as spinal muscular atrophy, compression neuropathies, and prior poliomyelitis. The need for an objective measure for the assessment of motor units remains tantalizingly close but unfulfilled in 2016.

  8. Assisted Reproductive Technology Surveillance - United States, 2015.

    Science.gov (United States)

    Sunderam, Saswati; Kissin, Dmitry M; Crawford, Sara B; Folger, Suzanne G; Boulet, Sheree L; Warner, Lee; Barfield, Wanda D

    2018-02-16

    Since the first U.S. infant conceived with assisted reproductive technology (ART) was born in 1981, both the use of ART and the number of fertility clinics providing ART services have increased steadily in the United States. ART includes fertility treatments in which eggs or embryos are handled in the laboratory (i.e., in vitro fertilization [IVF] and related procedures). Although the majority of infants conceived through ART are singletons, women who undergo ART procedures are more likely than women who conceive naturally to deliver multiple-birth infants. Multiple births pose substantial risks for both mothers and infants, including obstetric complications, preterm delivery (state-specific information for the United States (including the District of Columbia and Puerto Rico) on ART procedures performed in 2015 and compares birth outcomes that occurred in 2015 (resulting from ART procedures performed in 2014 and 2015) with outcomes for all infants born in the United States in 2015. 2015. In 1995, CDC began collecting data on ART procedures performed in fertility clinics in the United States as mandated by the Fertility Clinic Success Rate and Certification Act of 1992 (FCSRCA) (Public Law 102-493 [October 24, 1992]). Data are collected through the National ART Surveillance System, a web-based data collection system developed by CDC. This report includes data from 52 reporting areas (the 50 states, the District of Columbia, and Puerto Rico). In 2015, a total of 182,111 ART procedures (range: 135 in Alaska to 23,198 in California) with the intent to transfer at least one embryo were performed in 464 U.S. fertility clinics and reported to CDC. These procedures resulted in 59,334 live-birth deliveries (range: 55 in Wyoming to 7,802 in California) and 71,152 infants born (range: 68 in Wyoming to 9,176 in California). Nationally, the number of ART procedures performed per 1 million women of reproductive age (15-44 years), a proxy measure of the ART utilization rate, was

  9. Nuclear Systems (NS): Technology Demonstration Unit (TDU)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nuclear Systems Project demonstrates nuclear power technology readiness to support the goals of NASA's Space Technology Mission Directorate. To this end, the...

  10. Technology assessment using NBIC convergence

    International Nuclear Information System (INIS)

    Vaseashta, Ashok

    2009-01-01

    Technologies' has considerably influenced scientific and social thinking about the future, there are several active debates in progress. The first being about the future of technologies and their relations to humans as nanoscale materials and systems provide the means to probe cells and provide basis for human performance augmentation - hence contributing to the formation of political and public opinion on societal aspects of science and technology. Such debates have lead to socio-political and ethical issues that transcend academic disciplinary borders that are rooted outside of the scientific arena. Thus it necessitates, inter- and often trans-disciplinary research to contribute effectively to these formative process. Such concerns are independently addressed using studies relating to toxicology, fate, transport, and bioavailability of nanomaterials, as well as human exposures to these materials. On another front, the debate is on the future of the scientific disciplines and visions about technological developments. Such predictions often relate to human way of life, environmental and international security, and are used by scientists, engineers, managers, policymakers, media, philosophers and authors - all with different interpretations. We present balanced, yet strategic assessments and recommendations of revolutionary scientific breakthroughs in multidisciplinary environments based on the NBIC convergence approach. Technology roadmaps are cautiously formulated based on extensive research, expert elicitation, and networking approaches to project 'future scenarios' realistically and epistemologically. Such roadmaps enable development of transformative tools and methodologies that fill fundamental knowledge gaps, and change culture in academia to foster collaboration, thus providing unique solutions. It is expected that the synergy arising from converging technologies and research methodologies at the IASC will leverage emerging and potentially transformative studies. The

  11. Technology assessment of wind energy conversion systems

    Energy Technology Data Exchange (ETDEWEB)

    Meier, B. W.; Merson, T. J.

    1980-09-01

    Environmental data for wind energy conversion systems (WECSs) have been generated in support of the Technology Assessment of Solar Energy (TASE) program. Two candidates have been chosen to characterize the WECS that might be deployed if this technology makes a significant contribution to the national energy requirements. One WECS is a large machine of 1.5-MW-rated capacity that can be used by utilities. The other WECS is a small machine that is characteristic of units that might be used to meet residential or small business energy requirements. Energy storage systems are discussed for each machine to address the intermittent nature of wind power. Many types of WECSs are being studied and a brief review of the technology is included to give background for choosing horizontal axis designs for this study. Cost estimates have been made for both large and small systems as required for input to the Strategic Environmental Assessment Simulation (SEAS) computer program. Material requirements, based on current generation WECSs, are discussed and a general discussion of environmental impacts associated with WECS deployment is presented.

  12. Assessing the Performance of Business Unit Managers

    NARCIS (Netherlands)

    Bouwens, J.F.M.G.; van Lent, L.A.G.M.

    2006-01-01

    Using a sample of 140 managers, we investigate the use of various performance metrics in determining the periodic assessment, bonus decisions, and career paths of business unit managers.We show that the weight on accounting return measures is associated with the authority of these managers, and we

  13. Technology assessment of solar energy utilization

    Science.gov (United States)

    Jaeger, F.

    1985-11-01

    The general objectives and methods of Technology Assessment (TA) are outlined. Typical analysis steps of a TA for solar energy are reviewed: description of the technology and its further development; identification of impact areas; analysis of boundary conditions and definition of scenarios; market penetration of solar technologies; projection of consequences in areas of impact; and assessment of impacts and identification of options for action.

  14. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Larisa Alexejevna Ismagilova

    2016-12-01

    Full Text Available We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of quality of innovative technologies is a key aspect in the selection of technological processes for their implementation. Problems concerning assessment of the quality of new technologies and processes of production are considered in the suggested method with respect to new positions. The developed method of assessing the quality of innovative technologies stands out for formed system of the qualimetric characteristics ensuring the effectiveness, efficiency, adaptability of innovative technologies and processes. The feature of suggested system of assessment is that it is based on principles of matching and grouping of quality indicators of innovative technologies and the characteristics of technological processes. The indicators are assessed from the standpoint of feasibility, technologies competiveness and commercial demand of products. In this paper, we discuss the example of implementing the approach of assessing the quality of the innovative technology of high-tech products such as turbine aircraft engine.

  15. Modelling in Medical Technology Assessment

    NARCIS (Netherlands)

    B.C. Michel (Bowine)

    1996-01-01

    textabstractHealth care is a rapidly developing field in which new technologies are introduced continuously. Not all new technologies have the same impact however: most represent only small changes in existing technologies, whereas only a few - like organ transplants - really are revolutionary new

  16. Liquefaction technology assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    A survey of coal liquefaction technology and analysis of projected relative performance of high potential candidates has been completed and the results are reported here. The key objectives of the study included preparation of a broad survey of the status of liquefaction processes under development, selection of a limited number of high potential process candidates for further study, and an analysis of the relative commercial potential of these candidates. Procedures which contributed to the achievement of the above key goals included definition of the characteristics and development status of known major liquefaction process candidates, development of standardized procedures for assessing technical, environmental, economic and product characteristics for the separate candidates, and development of procedures for selecting and comparing high potential processes. The comparisons were made for three production areas and four marketing areas of the US. In view of the broad scope of the objectives the survey was a limited effort. It used the experience gained during preparation of seven comprehensive conceptual designs/economic evaluations plus comprehensive reviews of the designs, construction and operation of several pilot plants. Results and conclusions must be viewed in the perspective of the information available, how this information was treated, and the full context of the economic comparison results. Comparative economics are presented as ratios; they are not intended to be predictors of absolute values. Because the true cost of constructing and operating large coal conversion facilities will be known only after commercialization, relative values are considered more appropriate. (LTN)

  17. Integrated assessment of bioelectricity technology options

    International Nuclear Information System (INIS)

    Thornley, Patricia; Upham, Paul; Huang, Ye; Rezvani, Sina; Brammer, John; Rogers, John

    2009-01-01

    Power generation from biomass is a sustainable energy technology which can contribute to substantial reductions in greenhouse gas emissions, but with greater potential for environmental, economic and social impacts than most other renewable energy technologies. It is important therefore in assessing bioenergy systems to take account of not only technical, but also environmental, economic and social parameters on a common basis. This work addresses the challenge of analysing, quantifying and comparing these factors for bioenergy power generation systems. A life-cycle approach is used to analyse the technical, environmental, economic and social impacts of entire bioelectricity systems, with a number of life-cycle indicators as outputs to facilitate cross-comparison. The results show that similar greenhouse gas savings are achieved with the wide variety of technologies and scales studied, but land-use efficiency of greenhouse gas savings and specific airborne emissions varied substantially. Also, while specific investment costs and electricity costs vary substantially from one system to another the number of jobs created per unit of electricity delivered remains roughly constant. Recorded views of stakeholders illustrate that diverging priorities exist for different stakeholder groups and this will influence appropriate choice of bioenergy systems for different applications

  18. History of health technology assessment: Spain.

    Science.gov (United States)

    Sampietro-Colom, Laura; Asua, Jose; Briones, Eduardo; Gol, Jordi

    2009-07-01

    The aim of this study was to describe the characteristics of the introduction and diffusion of health technology assessment (HTA) in Spain. A survey to summarize the evolution of HTA was sent to representatives of different HTA initiatives in Spain. HTA was introduced in the late 1980s. The main factors were the trend to an increase in healthcare expenditure, concerns regarding efficiency in providing health care, as well as in the level of rationality introducing high technology. Spain has direct (i.e., regulation) and indirect (i.e., payment systems, evidence-based programs, HTA) mechanisms to control health technologies. A recent high priority regulation has established the need of HTA to decide the introduction of a new health technology in the lists of public healthcare coverage, although similar regulations existed in the past and were scarcely implemented. HTA initiatives started at the regional government level. Its introduction followed a progressive pattern among regions. In the beginning, resources were scarce and expertise limited, with work done at intramural level. With time, expertise increase, and promotion of commissioned work was implemented. HTA knowledge transfer in the healthcare system has been carried out through courses, publications, and commissioned research. Currently, there are seven HTA units/agencies, which coordinate their work. HTA in Spain is in its maturity. Facing the unavoidable change of health care environment over time, HTA is also evolving and, currently, there is a trend to broaden the areas of influence of HTA by devolving capacity to hospitals and applying principles to very early phases of health technology development, under the umbrella of regional HTA units/agencies. However, there are two main challenges ahead. One is to have a real impact at the highest level of healthcare policy coordination among Spanish regions, which is done at the Central Ministry of Health. The other is to avoid the influence of political waves

  19. United States Japan Industry and Technology Management Training

    National Research Council Canada - National Science Library

    Gercik, Patricia

    2001-01-01

    .... The intellectual focus of the Program is to integrate the research methodologies of the social sciences, the humanities, and technology to approach issues confronting the United States and Japan...

  20. Establishment of Health Technology Assessment in Iran

    Directory of Open Access Journals (Sweden)

    Shila Doaee

    2012-06-01

    Full Text Available Objective: Health Technology Assessment (HTA aims at informing healthcare policymakers, managers and practitioners of the "clinical consequences, but also the economic, ethical, and other social implications of the diffusion and use of a specific procedure or technique on medical practice". So considering the policy-oriented nature of HTA that calls for a close integration into the functioning and governance of health systems the present study focuses on executive processes and function of the HTA office of Iran.Materials and methods: Data of this review study were collected through documented sources and observations from 2007 to 2010.Results: Health Technology Assessment began its activities as a secretariat in the Deputy of Health in 2007 and it continues as a Health Technology Assessment Office at the Management of Health Technology Assessment, Standardization, and Tariff at the Deputy of curative affairs of MOHME in the beginning of 2010.14 Technology of modern medical equipment and 8 pharmaceutical medicine are assessed, Now many of measures for HTA establishment  such as cooperation National Institute of Health Research (NIHR, Holding scientific committee meetings, Establishing  the  Master's degree of  health technology assessment ,Building capacities for health technology assessment through education in major universities of the country.Conclusion: pay attention to health technology assessment, selection and application of proper technologies in the frameworks of policy-making and managerial strategies and make efforts to develop it with the support of the governmental in Iran is necessary.

  1. Technology assessment of in situ uranium mining

    International Nuclear Information System (INIS)

    Cowan, C.E.

    1981-01-01

    The objective of the PNL portion of the Technology Assessment project is to provide a description of the current in situ uranium mining technology; to evaluate, based on available data, the environmental impacts and, in a limited fashion, the health effects; and to explore the impediments to development and deployment of the in situ uranium mining technology

  2. Identifying and Assessing Life-Cycle-Related Critical Technology Elements (CTEs) for Technology Readiness Assessments (TRAs)

    National Research Council Canada - National Science Library

    Mandelbaum, Jay

    2006-01-01

    .... Because these technologies are not emphasized in the current Technology Readiness Assessment (TRA) process this document is intended to improve the focus on life-cycle-related technologies in TRAs...

  3. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    OpenAIRE

    Larisa Alexejevna Ismagilova; Nadegda Aleksandrovna Sukhova

    2016-01-01

    We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of qu...

  4. The vacuum system for technological unit development and design

    Science.gov (United States)

    Zhukeshov, A. M.; Gabdullina, A. T.; Amrenova, A. U.; Giniyatova, Sh G.; Kaibar, A.; Sundetov, A.; Fermakhan, K.

    2015-11-01

    The paper shows results of development of plasma technological unit on the basis of accelerator of vacuum arc and automated system. During the previous years, the authors investigated the operation of pulsed plasma accelerator and developed unique technologies for hardening of materials. Principles of plasma formation in pulsed plasma accelerator were put into basis of the developed unit. Operation of the pulsed arc accelerator was investigated at different parameters of the charge. The developed vacuum system is designed for production of hi-tech plasma units in high technologies in fields of nanomaterials, mechanical and power engineering and production with high added value. Unlike integrated solutions, the system is a module one to allow its low cost, high reliability and simple maintenance. The problems of use of robots are discussed to modernize the technological process.

  5. The vacuum system for technological unit development and design

    International Nuclear Information System (INIS)

    Zhukeshov, A M; Gabdullina, A T; Amrenova, A U; Giniyatova, Sh G; Kaibar, A; Sundetov, A; Fermakhan, K

    2015-01-01

    The paper shows results of development of plasma technological unit on the basis of accelerator of vacuum arc and automated system. During the previous years, the authors investigated the operation of pulsed plasma accelerator and developed unique technologies for hardening of materials. Principles of plasma formation in pulsed plasma accelerator were put into basis of the developed unit. Operation of the pulsed arc accelerator was investigated at different parameters of the charge. The developed vacuum system is designed for production of hi-tech plasma units in high technologies in fields of nanomaterials, mechanical and power engineering and production with high added value. Unlike integrated solutions, the system is a module one to allow its low cost, high reliability and simple maintenance. The problems of use of robots are discussed to modernize the technological process. (paper)

  6. Civil Engineering Technology Needs Assessment.

    Science.gov (United States)

    Oakland Community Coll., Farmington, MI. Office of Institutional Planning and Analysis.

    In 1991, a study was conducted by Oakland Community College (OCC) to evaluate the need for a proposed Civil Engineering Technology program. An initial examination of the literature focused on industry needs and the job market for civil engineering technicians. In order to gather information on local area employers' hiring practices and needs, a…

  7. Assessment of Soil Nutrient Status of Identified Soil Units in Selected ...

    African Journals Online (AJOL)

    Journal of Technology and Education in Nigeria ... Assessment of Soil Nutrient Status of Identified Soil Units in Selected Communities in Three Local Government Areas ... Available phosphorus content in the soils is generally high with values ...

  8. Biological Environmental Sampling Technologies Assessment

    Science.gov (United States)

    2015-12-01

    modular set of aerosol detector, collector, and identifier components. Before the award, the JBTDS program office engaged its combat developers and...collection and identification processes are not integrated into one unit. Concern was also expressed regarding operation of the smartphone -based Biomeme one3...DESCRIPTION (JBTDS) The Joint Biological Tactical Detection System (JBTDS) will be employed as a modular set of capabilities (detector, collector, and

  9. Environment Sentinel Biomonitor Technology Assessment

    Science.gov (United States)

    2013-09-01

    Vallejo , Y.R. ANP Technologies, Inc., Newark, DE. Personal communication, 2010. APPENDIX H 41 Table H.1. Response to Test Chemicals a Values...Pentachlorophenate (sodium) 0.023 >71.9 71.9 Phenol 2.8 91.5 Thallium (sulfate) 0.0033 >13.5 13.5 Toluene 9.3 >422 840 References Vallejo , Y.R. ANP

  10. Life Cycle Assessment of Slurry Management Technologies

    DEFF Research Database (Denmark)

    Wesnæs, Marianne; Wenzel, Henrik; Petersen, Bjørn Molt

    This report contains the results of Life Cycle Assessments of two slurry management technologies - acidification and decentred incineration. The LCA foundation can be used by the contributing companies for evaluating the environmental sustainability of a specific technology from a holistic Life...... Cycle perspective. Through this the companies can evaluate the environmental benefits and disadvantages of introducing a specific technology for slurry management. From a societal perspective the results can contribute to a clarification of which slurry management technologies (or combination...... of technologies) having the largest potential for reducing the overall environmental impacts....

  11. Technologies Assessing Limb Bradykinesia in Parkinson's Disease.

    Science.gov (United States)

    Hasan, Hasan; Athauda, Dilan S; Foltynie, Thomas; Noyce, Alastair J

    2017-01-01

    The MDS-UPDRS (Movement Disorders Society - Unified Parkinson's Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development.

  12. Solar technology assessment project. Volume 6: Photovoltaic technology assessment

    Science.gov (United States)

    Backus, C. E.

    1981-04-01

    Industrial production of photovoltaic systems and volume of sales are reviewed. Low cost silicon production techniques are reviewed, including the Czochralski process, heat exchange method, edge defined film fed growth, dentritic web growth, and silicon on ceramic process. Semicrystalline silicon, amorphous silicon, and low cost poly-silicon are discussed as well as advanced materials and concentrator systems. Balance of system components beyond those needed to manufacture the solar panels are included. Nontechnical factors are assessed. The 1986 system cost goals are briefly reviewed.

  13. 76 FR 5834 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

    Science.gov (United States)

    2011-02-02

    ... Machines Corporation, Global Technology Services Business Unit, Integrated Technology Services, Cost and..., applicable to workers of International Business Machines Corporation, Global Technology Services Business... engaged in activities related to support for the Global Technology Services Business Unit. The company...

  14. Small Wind Turbine Technology Assessment

    International Nuclear Information System (INIS)

    Avia Aranda, F.; Cruz Cruz, I.

    1999-01-01

    The result of the study carried out under the scope of the ATYCA project Test Plant of Wind Systems for Isolated Applications, about the state of art of the small wind turbine technology (wind turbines with swept area smaller than 40 m 2 ) is presented. The study analyzes the collected information on 60 models of wind turbines from 23 manufacturers in the worldwide market. Data from Chinese manufacturers, that have a large participation in the total number of small wind turbines in operation, are not included, due to the unavailability of the technical information. (Author) 15 refs

  15. Proposal for a United Nations Basic Space Technology Initiative

    Science.gov (United States)

    Balogh, Werner

    Putting space technology and its applications to work for sustainable economic and social development is the primary objective of the United Nations Programme on Space Applications, launched in 1971. A specific goal for achieving this objective is to establish a sustainable national space capacity. The traditional line of thinking has supported a logical progression from building capacity in basic space science, to using space applications and finally - possibly - to establishing indigenous space technology capabilities. The experience in some countries suggests that such a strict line of progression does not necessarily hold true and that priority given to the establishment of early indigenous space technology capabilities may contribute to promoting the operational use of space applications in support of sustainable economic and social development. Based on these findings and on the experiences with the United Nations Basic Space Science Initiative (UNBSSI) as well as on a series of United Nations/International Academy of Astronautics Workshops on Small Satellites in the Service of Developing Countries, the United Nations Office for Outer Space Affairs (UNOOSA) is considering the launch of a dedicated United Nations Basic Space Technology Initiative (UNBSTI). The initiative would aim to contribute to capacity building in basic space technology and could include, among other relevant fields, activities related to the space and ground segments of small satellites and their applications. It would also provide an international framework for enhancing cooperation between all interested actors, facilitate the exchange of information on best practices, and contribute to standardization efforts. It is expected that these activities would advance the operational use of space technology and its applications in an increasing number of space-using countries and emerging space nations. The paper reports on these initial considerations and on the potential value-adding role

  16. Unmanned Ground Vehicle Tactical Behaviors Technology Assessment

    National Research Council Canada - National Science Library

    Childers, Marshal A; Bodt, Barry A; Hill, Susan G; Camden, Richard; Dean, Robert M; Dodson, William F; Sutton, Lyle G; Sapronov, Leonid

    2009-01-01

    During 4-14 February 2008, the U.S. Army Research Laboratory and General Dynamics Robotic Systems conducted an unmanned systems tactical behaviors technology assessment at three training areas of Ft. Indiantown Gap, PA...

  17. A Suite of Tools for Technology Assessment

    Science.gov (United States)

    2007-09-01

    Saden, Povinelli & Rosen, 1989). • This was a significant change in emphasis on the part of NASA, where technology had previously viewed as merely...Cost Analysis Symposium, April 13, 2005. A Suite of Tools for Technology Assessment 24 Bibliography - continued: • Sadin, Stanley T.; Povinelli

  18. Assessing medical technologies in development; a new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, Gerhard

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. - Method: We introduce a method, based on

  19. Assessing medical technologies in development - A new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, MJM; van Rossum, W; Verkerke, GJ; Rakhorst, G

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. Method: We introduce a method, based on

  20. Discharge from an emergency department observation unit and a surgical assessment unit

    DEFF Research Database (Denmark)

    Schultz, Helen; Qvist, Niels; Backer Mogensen, Christian

    2014-01-01

    To investigate the experiences of patients with acute abdominal pain at discharge from an emergency department observation unit compared with discharge from a surgical assessment unit.......To investigate the experiences of patients with acute abdominal pain at discharge from an emergency department observation unit compared with discharge from a surgical assessment unit....

  1. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  2. Wireless technology for ABC Assessment

    DEFF Research Database (Denmark)

    Kristensen, Margit; Kyng, Morten; Christensen, Erika Frischknecht

    are developing: A wireless biomonitoring system (WBMS), where data, collected from (injured) persons is distributed wirelessly to displays, available for any rescuer in need of accessing the data, independently of the rescuers location. A biosensor for measuring respiration sound and frequency, to give direct....... Firstly in the daily EMS work where the collected data can be available at the hospital before the victim arrives and data can be used in the before-arrival-planning process. Secondly in larger incidents with several victims where a WBMS can support rescuers at the incident site in the assessment...

  3. Spent Nuclear Fuel Alternative Technology Risk Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Perella, V.F.

    1999-11-29

    A Research Reactor Spent Nuclear Fuel Task Team (RRTT) was chartered by the Department of Energy (DOE) Office of Spent Fuel Management with the responsibility to recommend a course of action leading to a final technology selection for the interim management and ultimate disposition of the foreign and domestic aluminum-based research reactor spent nuclear fuel (SNF) under DOE''s jurisdiction. The RRTT evaluated eleven potential SNF management technologies and recommended that two technologies, direct co-disposal and an isotopic dilution alternative, either press and dilute or melt and dilute, be developed in parallel. Based upon that recommendation, the Westinghouse Savannah River Company (WSRC) organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies and provide a WSRC recommendation to DOE for a preferred SNF alternative management technology. A technology risk assessment was conducted as a first step in this recommendation process to determine if either, or both, of the technologies posed significant risks that would make them unsuitable for further development. This report provides the results of that technology risk assessment.

  4. Spent Nuclear Fuel Alternative Technology Risk Assessment

    International Nuclear Information System (INIS)

    Perella, V.F.

    1999-01-01

    A Research Reactor Spent Nuclear Fuel Task Team (RRTT) was chartered by the Department of Energy (DOE) Office of Spent Fuel Management with the responsibility to recommend a course of action leading to a final technology selection for the interim management and ultimate disposition of the foreign and domestic aluminum-based research reactor spent nuclear fuel (SNF) under DOE''s jurisdiction. The RRTT evaluated eleven potential SNF management technologies and recommended that two technologies, direct co-disposal and an isotopic dilution alternative, either press and dilute or melt and dilute, be developed in parallel. Based upon that recommendation, the Westinghouse Savannah River Company (WSRC) organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies and provide a WSRC recommendation to DOE for a preferred SNF alternative management technology. A technology risk assessment was conducted as a first step in this recommendation process to determine if either, or both, of the technologies posed significant risks that would make them unsuitable for further development. This report provides the results of that technology risk assessment

  5. An environmental assessment system for environmental technologies

    DEFF Research Database (Denmark)

    Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund

    2014-01-01

    A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

  6. Expanding the applicability of Heallth Technology Assessments

    DEFF Research Database (Denmark)

    Draborg, Eva; Hansen, Helle Ploug

    2012-01-01

    The objective of the presentation is to expand the foundations of input into policy decision making relying on health technology assessments (HTA). HTAs are primarily based on systematic reviews (SR) and thereby mostly on randomized controlled trials (RCT). RCTs can be distinguished on a continuum...... between explanatory and pragmatic trials according to their level of control over variables in the study besides the examined technology. In explanatory trials emphasis are placed on internal validity in order to test the efficacy of a technology under ideal conditions while pragmatic trials emphasizes...... external validity and the effectiveness of a technology in normal daily practice. SR and HTAs favors internal valid trials and thereby proofs of possible cause-effect relationship between a technology and outcomes but at the expense of the wider perspectives of a technology. HTA have a policy...

  7. Evaluation of a technology unit in a girls' primary school

    Science.gov (United States)

    Eke, Marion; Gardner, Paul L.

    1991-12-01

    Rapid advances in technology are changing the structure of the workforce. There are elite highly-paid hi-tech occupations and low status poorly-paid jobs. Women are unfortunately more likely to be found in the latter category. To allow them to qualify and compete for the higher-status positions, girls need to participate in the physical sciences and in technology studies. However, they are rarely attracted to them in secondary school, possibly because they are already alienated from them by the time they leave primary school. This paper reports some of the outcomes of a curriculum unit taught in two primary school classes in an independent school for girls. The unit was cross-curricular, involving technology, science and other fields of knowledge; it made extensive use of LEGO Technic materials. The evaluation of the unit, based on observations, a teacher journal and pupil questionnaires, focussed upon the issue of whether it assisted the girls to feel happier about working with unfamiliar technology and feel more capable of doing so. Implications for teaching technology are also discussed.

  8. Energy and the environment: Technology assessment and policy options

    International Nuclear Information System (INIS)

    Silveira, M.P.W.

    1990-01-01

    While the energy crisis of the 1970s stimulated technological innovation in developed countries, it often had the opposite effect in the third world. However, developing countries can be considered to have two types of energy systems: ''connected'' and ''disconnected''. The connected system is affected by changes in the price of commercial energy, but the disconnected system is usually rural and remote. Commercial forms of energy may be needed in the disconnected system, but they are largely unavailable. In some of the developing countries, new energy technologies have therefore been developed which adapt traditional technologies still existing in the disconnected sector. In this article some of the work of the United National Centre for Science and Technology for Development is described. Through its ATAS (Advance Technology Alert System) programme, international and regional workshops are held to discuss policy questions arising in regard to new technologies and developments. Workshops have been held in Moscow on new energy technologies in the industry subsystem (connected), in Guatemala City on new energy technologies and the disconnected system, and in Ottawa on new energy technologies, transportation and development. Initial assessments made by or through these workshops are outlined here. A fourth workshop will be held in June 1990 in Saarbrucken on energy technologies and climate change. (author). 3 figs

  9. Social Shaping in Danish Technology Assessment

    DEFF Research Database (Denmark)

    Hansen, Anne Grethe; Clausen, Christian

    2003-01-01

    The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social an...... in these projects contributed to new insights into the processes of technological change and thus to policy formulation. The social shaping perspective and technology assessment experiences are suggested as important guides to future technology strategies....... and political action for technology change. The authors of this article suggest that the social shaping perspective draws on lessons from technology assessments of earlier decades, lessons about the role of technology debate, participation and democratic control. We suggest that these are important......The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social...

  10. An overview of enabling technology research in the United States

    International Nuclear Information System (INIS)

    Baker, Charles C.

    2002-01-01

    The mission of the US Fusion Energy Sciences Program is to advance plasma science, fusion science, and fusion technology--the knowledge base needed for an economically and environmentally attractive fusion energy source. In support of this overall mission, the Enabling Technology Program in the US incorporates both near and long term R and D, contributes to material and engineering sciences as well as technology development, contributes to spin-off applications, and performs global systems assessments and focused design studies. This work supports both magnetic and inertial fusion energy (IFE) concepts. The Enabling Technology research mission is to contribute to the national science and technology base by developing the enabling technology for existing and next-step experimental devices, by exploring and understanding key materials and technology feasibility issues for attractive fusion power sources, by conducting advanced design studies that integrate the wealth of our understanding to guide R and D priorities and by developing design solutions for next-step and future devices. The Enabling Technology Program Plan is organized around five elements: plasma technologies, fusion (chamber) technologies, materials sciences, advanced design, and IFE chamber and target technologies. The principal technical features and research objectives are described for each element

  11. The Past and the Future of Constructive Technology Assessment

    NARCIS (Netherlands)

    Schot, Johan; Rip, Arie

    1997-01-01

    Constructive technology assessment (CTA) is a member of the family of technology assessment approaches. developed in particular in the Netherlands and Denmark. CTA shifts the focus away from assessing impacts of new technologies to broadening design, development, and implementation processes.

  12. 75 FR 20388 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

    Science.gov (United States)

    2010-04-19

    ... Machines Corporation, Global Technology Services Business Unit, Integrated Technology Services, Cost and... Technology Services Business Unit, Integrated Technology Services, Cost and Expense Team working from various... Technology Services Business Unit. The company reports that workers leased from Datrose, Inc., were employed...

  13. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2007-01-01

    , which includes technical, economic and environmental aspects. The technical and economic assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, Membrane Bioreactor (MBR), and UV in combination......As a consequence of the EU Water Framwork Directive, more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advenced treatment technologies. This paper describes a holistic assessment...... with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances...

  14. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2008-01-01

    , which includes technical, economical and environmental aspects. The technical and economical assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, membrane bioreactor (MBR) and UV in combination......As a consequence of the EU Water Framework Directive more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advanced treatment technologies. This paper describes a holistic assessment...... with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances...

  15. Technology assessment and social science research on technology

    International Nuclear Information System (INIS)

    Thienen, V. von

    1983-01-01

    In a first step this bibliography wants to overcome the want of systematic scientific data compilations and evaluations of experiences in studies on technology assessment. It concentrates on the social and political aspects of the development of technologies and the decision on their utilization by presenting titles which have been published in English- and German-speaking countries in the past decade. The bibliography is divided into various chapters and subchapters. The index part contains authors' indexes and publishers' indexes, subject indexes, other bibliographies and selected periodicals. (orig.) With 1647 refs [de

  16. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  17. Biomass Gasification Technology Assessment: Consolidated Report

    Energy Technology Data Exchange (ETDEWEB)

    Worley, M.; Yale, J.

    2012-11-01

    Harris Group Inc. (HGI) was commissioned by the National Renewable Energy Laboratory to assess gasification and tar reforming technologies. Specifically, the assessments focused on gasification and tar reforming technologies that are capable of producing a syngas suitable for further treatment and conversion to liquid fuels. HGI gathered sufficient information to analyze three gasification and tar reforming systems. This report summarizes the equipment, general arrangement of the equipment, operating characteristics, and operating severity for each technology. The order of magnitude capital cost estimates are supported by a basis-of-estimate write-up, which is also included in this report. The report also includes Microsoft Excel workbook models, which can be used to design and price the systems. The models can be used to analyze various operating capacities and pressures. Each model produces a material balance, equipment list, capital cost estimate, equipment drawings and preliminary general arrangement drawings. Example outputs of each model are included in the Appendices.

  18. An assessment of information communication technology content ...

    African Journals Online (AJOL)

    An assessment of information communication technology content, context and ... a- vis the upscaling of ICT in health care facilities in Nairobi and Machakos counties. ... high in all the facilities compared to levels of services operations computerised and ... for Authors · for Policy Makers · about Open Access · Journal Quality.

  19. Assessment of Wearable Sensor Technologies for Biosurveillance

    Science.gov (United States)

    2014-11-01

    include: textile-based wearable sensors, epidermal tattoos, DNA and protein sensors, forensic detection of explosives, remote environmental sensing...Assessment of Wearable Sensor Technologies for Biosurveillance P a g e 4 3 David L. Hirschberg, PhD Assistant Professor, Clinical Pathology

  20. Assessment of Sensor Technologies for Advanced Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Korsah, Kofi [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Vlim, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Kisner, Roger A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Britton, Jr, Charles L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wootan, D. W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Anheier, Jr, N. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Diaz, A. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, E. H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chien, H. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Sheen, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Bakhtiari, Sasan [Argonne National Lab. (ANL), Argonne, IL (United States); Gopalsami, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Heifetz, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Tam, S. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Park, Y. [Argonne National Lab. (ANL), Argonne, IL (United States); Upadhyaya, B. R. [Univ. of Tennessee, Knoxville, TN (United States); Stanford, A. [Univ. of Tennessee, Knoxville, TN (United States)

    2016-10-01

    Sensors and measurement technologies provide information on processes, support operations and provide indications of component health. They are therefore crucial to plant operations and to commercialization of advanced reactors (AdvRx). This report, developed by a three-laboratory team consisting of Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL), provides an assessment of sensor technologies and a determination of measurement needs for AdvRx. It provides the technical basis for identifying and prioritizing research targets within the instrumentation and control (I&C) Technology Area under the Department of Energy’s (DOE’s) Advanced Reactor Technology (ART) program and contributes to the design and implementation of AdvRx concepts.

  1. DESIGNING FEATURES OF POWER OPTICAL UNITS FOR TECHNOLOGICAL EQUIPMENT

    Directory of Open Access Journals (Sweden)

    M. Y. Afanasiev

    2016-03-01

    Full Text Available This paper considers the question of an optical unit designing for transmitting power laser radiation through an optical fiber. The aim of this work is designing a simple construction unit with minimized reflection losses. The source of radiation in the optical unit described below is an ultraviolet laser with diode pumping. We present the general functioning scheme and designing features for the three main parts: laser beam deflecting system, laser beam dump and optical unit control system. The described laser beam deflection system is composed of a moving flat mirror and a spherical scattering mirror. Comparative analysis of the production technology for such mirrors was carried out, and, as a result, the decision was made to produce both mirrors of 99.99 % pure molybdenum without coating. A moving mirror deflects laser emission from a source through a fiber or deflects it on a spherical mirror and into the laser beam dump, moreover, switching from one position to another occurs almost immediately. It is shown that a scattering mirror is necessary, otherwise, the absorbing surface of the beam dump is being worn out irregularly. The laser beam dump is an open conical cavity, in which the conical element with its spire turned to the emission source is placed. Special microgeometry of the internal surface of the beam dump is suggested for the better absorption effect. An optical unit control system consists of a laser beam deflection system, laser temperature sensor, deflection system solenoid temperature sensor, and deflection mirror position sensor. The signal processing algorithm for signals coming from the sensors to the controller is described. The optical unit will be used in special technological equipment.

  2. Evaluating Russian space nuclear reactor technology for United States applications

    International Nuclear Information System (INIS)

    Polansky, G.F.; Schmidt, G.L.; Voss, S.S.; Reynolds, E.L.

    1994-01-01

    Space nuclear power and nuclear electric propulsion are considered important technologies for planetary exploration, as well as selected earth orbit applications. The Nuclear Electric Propulsion Space Test Program (NEPSTP) was intended to provide an early flight demonstration of these technologies at relatively low cost through extensive use of existing Russian technology. The key element of Russian technology employed in the program was the Topaz II reactor. Refocusing of the activities of the Ballistic Missile Defense Organization (BMDO), combined with budgetary pressures, forced the cancellation of the NEPSTP at the end of the 1993 fiscal year. The NEPSTP was faced with many unique flight qualification issues. In general, the launch of a spacecraft employing a nuclear reactor power system complicates many spacecraft qualification activities. However, the NEPSTP activities were further complicated because the reactor power system was a Russian design. Therefore, this program considered not only the unique flight qualification issues associated with space nuclear power, but also with differences between Russian and United States flight qualification procedures. This paper presents an overview of the NEPSTP. The program goals, the proposed mission, the spacecraft, and the Topaz II space nuclear power system are described. The subject of flight qualification is examined and the inherent difficulties of qualifying a space reactor are described. The differences between United States and Russian flight qualification procedures are explored. A plan is then described that was developed to determine an appropriate flight qualification program for the Topaz II reactor to support a possible NEPSTP launch

  3. Technology enhanced peer learning and peer assessment

    DEFF Research Database (Denmark)

    Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

    2016-01-01

    This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...... and performing focus group interviews. The application of peer assessment is investigated by analyzing the agreement of peer assessment between students assessing the same assignment. Our analyses confirm previous research on the value of peer learning and peer assessment and we argue that there could also...

  4. Technology Audit: Assessment of Innovative Portfolio

    Directory of Open Access Journals (Sweden)

    Kurushina Viktoria

    2016-01-01

    Full Text Available The article discusses the features of the technological audit performing in the companies of oil and gas sector of Russian economy. To measure the innovations quality level the scale was developed based on the Theory of Inventive Problem Solving and the theory of technological structures. Figures of the innovations quantity by levels, volume and quality of the innovative portfolio are offered for assessment the innovative portfolio quality. The method was tested on an example of oil and gas transporting enterprises. The results of the comparative analysis of innovative portfolio are shown.

  5. Technology assessment of geothermal energy resource development

    Energy Technology Data Exchange (ETDEWEB)

    1975-04-15

    Geothermal state-of-the-art is described including geothermal resources, technology, and institutional, legal, and environmental considerations. The way geothermal energy may evolve in the United States is described; a series of plausible scenarios and the factors and policies which control the rate of growth of the resource are presented. The potential primary and higher order impacts of geothermal energy are explored, including effects on the economy and society, cities and dwellings, environmental, and on institutions affected by it. Numerical and methodological detail is included in appendices. (MHR)

  6. Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

    Energy Technology Data Exchange (ETDEWEB)

    Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

    2005-10-03

    A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of

  7. Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

    International Nuclear Information System (INIS)

    Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

    2005-01-01

    A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of technology

  8. Pesticide risk assessment in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Richard N [Environmental Protection Agency, Washington, DC (United States)

    1992-07-01

    In recognition of potential risks, all pesticides distributed and sold in the United States must fulfil extensive registration requirements for the Environmental Protection Agency (EPA). Registration is a licensing procedure where industry must submit data to demonstrate the safety of pesticidal substances and products before they can be used commercially. The regulatory control of pesticides is unique among chemicals in the U.S. in that testing beyond initial registration may be imposed by the Agency throughout the commercial life of the chemical, as long as there is adequate justification. Registration requirements are gauged to the nature of potential exposures. For instance, more data are generally needed for food use registrations than for non-food uses because of direct consumption of treated foods by the whole U.S. population. Unlike pesticide practices in many countries and authorities, as in the European Community where agricultural pesticides, non-agricultural pesticides and genetically engineered microbial agents are handled by separate directives, all pesticide activities are covered in the U.S. by the Federal Insecticide, Fungicide and Rodenticide Act. This statute covers pesticide uses on foods and animal feed and a number of non-food applications like forest and horticultural uses, residential lawn care, in-home applications, and disinfectants/sterilants. Traditional inorganic and organic chemicals are covered, as well as biological agents like pheromones. Naturally occurring and genetically altered microorganisms also come under the definition of pesticides, but multicellular animals are exempt from regulation as pesticides. Pesticide registration in the U.S. as in many other countries may be a long-term, resource intensive undertaking. Not uncommonly the process from beginning to complete registration may take 4 to 10 years and cost about $10 million. To meet the responsibilities of reviewing studies, overseeing 400 active ingredients and 35

  9. Pesticide risk assessment in the United States

    International Nuclear Information System (INIS)

    Hill, Richard N.

    1992-01-01

    In recognition of potential risks, all pesticides distributed and sold in the United States must fulfil extensive registration requirements for the Environmental Protection Agency (EPA). Registration is a licensing procedure where industry must submit data to demonstrate the safety of pesticidal substances and products before they can be used commercially. The regulatory control of pesticides is unique among chemicals in the U.S. in that testing beyond initial registration may be imposed by the Agency throughout the commercial life of the chemical, as long as there is adequate justification. Registration requirements are gauged to the nature of potential exposures. For instance, more data are generally needed for food use registrations than for non-food uses because of direct consumption of treated foods by the whole U.S. population. Unlike pesticide practices in many countries and authorities, as in the European Community where agricultural pesticides, non-agricultural pesticides and genetically engineered microbial agents are handled by separate directives, all pesticide activities are covered in the U.S. by the Federal Insecticide, Fungicide and Rodenticide Act. This statute covers pesticide uses on foods and animal feed and a number of non-food applications like forest and horticultural uses, residential lawn care, in-home applications, and disinfectants/sterilants. Traditional inorganic and organic chemicals are covered, as well as biological agents like pheromones. Naturally occurring and genetically altered microorganisms also come under the definition of pesticides, but multicellular animals are exempt from regulation as pesticides. Pesticide registration in the U.S. as in many other countries may be a long-term, resource intensive undertaking. Not uncommonly the process from beginning to complete registration may take 4 to 10 years and cost about $10 million. To meet the responsibilities of reviewing studies, overseeing 400 active ingredients and 35

  10. Technology enhanced peer learning and peer assessment

    DEFF Research Database (Denmark)

    Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

    2016-01-01

    This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems and Fr...... be a huge benefit from developing learning design patterns that facilitate informal peer learning and reinforce knowledge sharing practices.......This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...

  11. Radiation safety assessment and development of environmental radiation monitoring technology

    CERN Document Server

    Choi, B H; Kim, S G

    2002-01-01

    The Periodic Safety Review(PSR) of the existing nuclear power plants is required every ten years according to the recently revised atomic energy acts. The PSR of Kori unit 1 and Wolsong unit 1 that have been operating more than ten years is ongoing to comply the regulations. This research project started to develop the techniques necessary for the PSR. The project developed the following four techniques at the first stage for the environmental assessment of the existing plants. 1) Establishment of the assessment technology for contamination and accumulation trends of radionuclides, 2) alarm point setting of environmental radiation monitoring system, 3) Development of Radiation Safety Evaluation Factor for Korean NPP, and 4) the evaluation of radiation monitoring system performance and set-up of alarm/warn set point. A dynamic compartment model to derive a relationship between the release rates of gas phase radionuclides and the concentrations in the environmental samples. The model was validated by comparing ...

  12. Natural-technological risk assessment and management

    Science.gov (United States)

    Burova, Valentina; Frolova, Nina

    2016-04-01

    EM-DAT statistical data on human impact and economic damages in the 1st semester 2015 are the highest since 2011: 41% of disasters were floods, responsible for 39% of economic damage and 7% of events were earthquakes responsible for 59% of total death toll. This suggests that disaster risk assessment and management still need to be improved and stay the principle issue in national and international related programs. The paper investigates the risk assessment and management practice in the Russian Federation at different levels. The method is proposed to identify the territories characterized by integrated natural-technological hazard. The maps of the Russian Federation zoning according to the integrated natural-technological hazard level are presented, as well as the procedure of updating the integrated hazard level taking into account the activity of separate processes. Special attention is paid to data bases on past natural and technological processes consequences, which are used for verification of current hazard estimation. The examples of natural-technological risk zoning for the country and some regions territory are presented. Different output risk indexes: both social and economic, are estimated taking into account requirements of end-users. In order to increase the safety of population of the Russian Federation the trans-boundaries hazards are also taken into account.

  13. Condition assessment and strengthening of residential units

    Directory of Open Access Journals (Sweden)

    Tatheer Zahra

    2014-01-01

    Full Text Available About 40, ground plus one (G+1 residential units were designed using a hybrid structural framing system (RC frame and load bearing walls. A few months after the completion of the ground floor of the residential units, cracks appeared at several locations in the structure. Field and Laboratory testing was conducted to ascertain the in situ strength of concrete and steel reinforcement. The results of the experimental work were used in the analytical ETABS model for the structural stability calculations. The results indicated that residential units were marginally safe in the existing condition (completed ground floor, but the anticipated construction of the floor above the ground floor (G+1 could not be carried out as the strength of the structural system was inadequate. To increase the safety of existing ground floor and to provide the option of the construction of one floor above, rehabilitation and strengthening design was performed. The proposed strengthening design made use of welded wire fabric (WWF and carbon fibre reinforced polymer (CFRP laminates/sheets for the strengthening of walls, columns and slabs. The residential units will be strengthened in the near future.

  14. Information Technology Sector Baseline Risk Assessment

    Science.gov (United States)

    2009-08-01

    alternative root be economically advantageous , an actor’s ability to exploit market forces and create an alternative root would be significantly improved...conduct their operations. Therefore, a loss or disruption to Internet services would not be advantageous for the desired outcomes of these syndicates.26... eCommerce Service loss or disruption [C] Traffic Redirection [C] = Undesired consequence Information Technology Sector Baseline Risk Assessment

  15. Life cycle assessment of ocean energy technologies

    OpenAIRE

    UIHLEIN ANDREAS

    2015-01-01

    Purpose Oceans offer a vast amount of renewable energy. Tidal and wave energy devices are currently the most advanced conduits of ocean energy. To date, only a few life cycle assessments for ocean energy have been carried out for ocean energy. This study analyses ocean energy devices, including all technologies currently being proposed, in order to gain a better understanding of their environmental impacts and explore how they can contribute to a more sustainable energy supply. Methods...

  16. Tiger Team Assessment, Energy Technology Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

  17. Tiger Team Assessment, Energy Technology Engineering Center

    International Nuclear Information System (INIS)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies

  18. Quadrennial Technology Review 2015: Technology Assessments--Wind Power

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2015-10-07

    Wind power has become a mainstream power source in the U.S. electricity portfolio, supplying 4.9% of the nation’s electricity demand in 2014. With more than 65 GW installed across 39 states at the end of 2014, utility-scale wind power is a cost-effective source of low-emissions power generation throughout much of the nation. The United States has significant sustainable land-based and offshore wind resource potential, greater than 10 times current total U.S. electricity consumption. A technical wind resource assessment conducted by the Department of Energy (DOE) in 2009 estimated that the land-based wind energy potential for the contiguous United States is equivalent to 10,500 GW capacity at 80 meters (m) hub and 12,000 GW capacity at 100 meters (m) hub heights, assuming a capacity factor of at least 30%. A subsequent 2010 DOE report estimated the technical offshore wind energy potential to be 4,150 GW. The estimate was calculated from the total offshore area within 50 nautical miles of shore in areas where average annual wind speeds are at least 7 m per second at a hub height of 90 m.

  19. Bank Units. Assessment and Development Tendencies

    Directory of Open Access Journals (Sweden)

    Adam Szafarczyk

    2008-01-01

    Full Text Available There are new trends in development banking sector especially concerning branches. The e-banking has diminished impact the old fashion branches as main tool finance activity. Now we have units (departments localised at supermarkets and in other strange places. Due to some researches mortgages and insurance polices ought to be sold in traditional branches according to clients preferences. Lafferty Agency researched quality of banking service condition in the UK. Base on this methodology similar case studies were done in Poland.

  20. Sustainability Assessment Using a Unit-based Sustainability ...

    African Journals Online (AJOL)

    A sustainability assessment study was performed with three teaching departments at Rhodes University – Ichthyology and Fisheries Science, Anthropology, and Accounting. The assessment used a Unit-based Sustainability Assessment Tool (USAT) and was guided by systems thinking and the ontological framework ...

  1. Radiation detection technology assessment program (RADTAP)

    International Nuclear Information System (INIS)

    Smith, D.E.

    1998-01-01

    The U.S. Customs Service and the U.S. Department of Energy (DOE) conducted a technical and operational assessment of gamma ray radiation detection equipment during the period May 5-16, 1997 at a testing facility in North Carolina. The effort was entitled, ''Radiation Detection Technology Assessment Program (RADTAP)'', and was conducted for the purpose of assessing the applicability, sensitivity and robustness of a diverse suite of gamma ray detection and identification equipment for possible use by Customs and other law enforcement agencies. Thirteen companies entered 25 instruments into the assessment program. All detection equipment entered had to exhibit a minimum sensitivity of 20 micro-R per hour (background included) from a Cesium-137 point source. Isotope identifying spectrometers entered were man portable and operable at room temperature with read-out that could be interpreted by non-technical personnel. Radioactive sources used in the assessment included special nuclear material, industrial and health isotopes. Evaluators included Customs inspectors and technical experts from DOE and Customs. No conclusions or recommendations were issued based on the quantitative and qualitative test results, however, the results of the program provided law enforcement agencies with the necessary data to select equipment that best meets their operational needs and budgets. (author)

  2. Primary data collection in health technology assessment.

    Science.gov (United States)

    McIsaac, Michelle L; Goeree, Ron; Brophy, James M

    2007-01-01

    This study discusses the value of primary data collection as part of health technology assessment (HTA). Primary data collection can help reduce uncertainty in HTA and better inform evidence-based decision making. However, methodological issues such as choosing appropriate study design and practical concerns such as the value of collecting additional information need to be addressed. The authors emphasize the conditions required for successful primary data collection in HTA: experienced researchers, sufficient funding, and coordination among stakeholders, government, and researchers. The authors conclude that, under specific conditions, primary data collection is a worthwhile endeavor in the HTA process.

  3. Bruce Unit 2 lay-up engineering assessment

    International Nuclear Information System (INIS)

    Iley, D.

    1995-01-01

    The overall lay-up program initiated as a result of the strategic decision to shut down Bruce A unit 2 is briefly described as an introduction to the engineering assessment of the unit 2 systems. The assessment has identified the need to prepare 67 system and 9 equipment lay-up specifications. A summary of the selected system specifications is described. A complete summary and the specifications and the status of unit 2 systems and equipment required to support lay-up and/or the other three operating units is available on request due to the volume of the information. Some logistical details of the lay-up implementation plans, results, and problems to date demonstrate the complexity of the lay-up requirements for a nuclear unit in a multi-unit CANDU station. (author)

  4. Technology Assessment Need: Review on Attractiveness and Competitiveness

    Science.gov (United States)

    Salwa Sait, Siti; Merlinda Muharam, Farrah; Chin, Thoo Ai; Sulaiman, Zuraidah

    2017-06-01

    Technology assessment is crucial in managing technology for the purpose of technology exploitation. With business environment continuously changing, firms have to address this issue critically as technology is considered one of the important elements to evaluate performance and gain competitive advantage. Missteps in deciding the best technology to be developed, employed or maintained would cost the firm overall value. To fulfil the need of finding the appropriate scale to assess suitable technology, this paper summarizes that technology assessment (TA) should cover two main aspects, namely technology attractiveness and competitiveness. These components are seen capable to link the scale suggested towards evaluation of financial and non-financial performance towards competitive advantage.

  5. Romania: Cernavoda unit 2. Assessments and evaluations. Annex 9B

    International Nuclear Information System (INIS)

    Rotaru, I.; Condu, M.

    1999-01-01

    This annex describes the various assessments and evaluations undertaken to confirm economic and technical viability of unit 2. The extent of modifications and improvements arising out of the suspension period are also identified. (author)

  6. Heat stress assessment in artistic glass units.

    Science.gov (United States)

    d'AMBROSIO Alfano, Francesca Romana; Palella, Boris Igor; Riccio, Giuseppe; Bartalini, Massimo; Strambi, Fabio; Malchaire, Jacques

    2018-04-07

    Heat stress in glass industry is mainly studied in large and highly mechanized manufacturing Units. To the contrary, few studies were carried out in small factories specialized in hand-made products. To stress the need of combined objective and medical surveys in these environments, this paper deals with a simultaneous climatic and physiological investigation of working conditions in artistic crystal glass factories in Tuscany (Italy). The microclimatic monitoring, through a continuous survey has been carried out in early spring. The main physiological parameters (metabolic rate, heart rate, tympanic temperature and water loss) were measured over the whole shifts. The results show that, despite the arduousness of the working conditions, the heat stress levels are physiologically tolerable. The predictions made using the PHS model at the Analysis level described in ISO 15265 agree closely to the observed values, validating the use of PHS model in these conditions. This model was then used to analyse what is likely to be the situation during the summer. It is concluded that the heat constraint will be very high and that some steps must be taken from the spring to monitor closely the exposed workers in the summer and take measures to prevent any heat accident.

  7. Technology needs assessment for DOE environmental restoration programs

    International Nuclear Information System (INIS)

    Duray, J.R.; Carlson, T.J.; Carpenter, C.E.; Cummins, L.E.; Daub, G.J.

    1992-01-01

    The 'Technology Needs Assessment Final Report' describes current and planned environmental restoration activity, identifies technologies intended to be used or under consideration, and ranks technology deficiencies in the U.S. Department of Energy's environmental restoration program. Included in the ranking are treatment technologies, characterization technologies, and non-technology issues that affect environmental restoration. Data used for the assessment was gathered during interviews in the spring of 1991 with DOE site personnel responsible for the environmental restoration work. (author)

  8. Expanding Health Technology Assessments to Include Effects on the Environment

    DEFF Research Database (Denmark)

    Marsh, Kevin; Ganz, Michael Lee; Hsu, John

    2016-01-01

    decision makers. Health care is an important and sizable sector of the economy that could warrant closer policy attention to its impact on the environment. Considerable work is needed to track decision makers' demands, augment the environmental evidence base, and develop robust methods for capturing......There is growing awareness of the impact of human activity on the climate and the need to stem this impact. Public health care decision makers from Sweden and the United Kingdom have started examining environmental impacts when assessing new technologies. This article considers the case...... and objectives extending beyond health care. Two types of challenges hinder this process. First, the nascent evidence base is insufficient to support the accurate comparison of technologies' environmental impacts. Second, cost-utility analysis, which is favored by many HTA agencies, could capture some...

  9. Clinical risk assessment in intensive care unit

    Directory of Open Access Journals (Sweden)

    Saeed Asefzadeh

    2013-01-01

    Full Text Available Background: Clinical risk management focuses on improving the quality and safety of health care services by identifying the circumstances and opportunities that put patients at risk of harm and acting to prevent or control those risks. The goal of this study is to identify and assess the failure modes in the ICU of Qazvin′s Social Security Hospital (Razi Hospital through Failure Mode and Effect Analysis (FMEA. Methods: This was a qualitative-quantitative research by Focus Discussion Group (FDG performed in Qazvin Province, Iran during 2011. The study population included all individuals and owners who are familiar with the process in ICU. Sampling method was purposeful and the FDG group members were selected by the researcher. The research instrument was standard worksheet that has been used by several researchers. Data was analyzed by FMEA technique. Results: Forty eight clinical errors and failure modes identified, results showed that the highest risk probability number (RPN was in respiratory care "Ventilator′s alarm malfunction (no alarm" with the score 288, and the lowest was in gastrointestinal "not washing the NG-Tube" with the score 8. Conclusions: Many of the identified errors can be prevented by group members. Clinical risk assessment and management is the key to delivery of effective health care.

  10. Technology and outcomes assessment in lung transplantation.

    Science.gov (United States)

    Yusen, Roger D

    2009-01-15

    Lung transplantation offers the hope of prolonged survival and significant improvement in quality of life to patients that have advanced lung diseases. However, the medical literature lacks strong positive evidence and shows conflicting information regarding survival and quality of life outcomes related to lung transplantation. Decisions about the use of lung transplantation require an assessment of trade-offs: do the potential health and quality of life benefits outweigh the potential risks and harms? No amount of theoretical reasoning can resolve this question; empiric data are needed. Rational analyses of these trade-offs require valid measurements of the benefits and harms to the patients in all relevant domains that affect survival and quality of life. Lung transplant systems and registries mainly focus outcomes assessment on patient survival on the waiting list and after transplantation. Improved analytic approaches allow comparisons of the survival effects of lung transplantation versus continued waiting. Lung transplant entities do not routinely collect quality of life data. However, the medical community and the public want to know how lung transplantation affects quality of life. Given the huge stakes for the patients, the providers, and the healthcare systems, key stakeholders need to further support quality of life assessment in patients with advanced lung disease that enter into the lung transplant systems. Studies of lung transplantation and its related technologies should assess patients with tools that integrate both survival and quality of life information. Higher quality information obtained will lead to improved knowledge and more informed decision making.

  11. New technologies - How to assess environmental effects

    Science.gov (United States)

    Sullivan, P. J.; Lavin, M. L.

    1981-01-01

    A method is provided for assessing the environmental effects of a room-and-pillar mining system (RP) and a new hydraulic borehole mining system (HBM). Before environmental assessment can begin, each technology is defined in terms of its engineering characteristics at both the conceptual and preliminary design stages. The mining sites are also described in order to identify the significant advantages and constraints for each system. This can be a basic physical and biological survey of the region at the conceptual stage, but a more specific representation of site characteristics is required at the preliminary stage. Assessment of potential environmental effects of each system at the conceptual design is critical to its hardware development and application. A checklist can be used to compare and identify the negative impacts of each method, outlining the resource affected, the type of impact involved, and the exact activity causing that impact. At the preliminary design stage, these impacts should be evaluated as a result of either utilization or alteration. Underground coal mining systems have three major utilization impacts - the total area disturbed, the total water resources withdrawn from other uses, and the overall energy efficiency of the process - and one major alteration impact - the degradation of water quality by sedimentation and acid contamination. A comparison of the RP and HBM systems shows the HBM to be an environmentally less desirable system for the Central Appalachia region.

  12. Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

    Science.gov (United States)

    Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

    2015-11-30

    Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. 2016 Offshore Wind Energy Resource Assessment for the United States

    Energy Technology Data Exchange (ETDEWEB)

    Musial, Walt [National Renewable Energy Lab. (NREL), Golden, CO (United States); Heimiller, Donna [National Renewable Energy Lab. (NREL), Golden, CO (United States); Beiter, Philipp [National Renewable Energy Lab. (NREL), Golden, CO (United States); Scott, George [National Renewable Energy Lab. (NREL), Golden, CO (United States); Draxl, Caroline [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    This report, the 2016 Offshore Wind Energy Resource Assessment for the United States, was developed by the National Renewable Energy Laboratory, and updates a previous national resource assessment study, and refines and reaffirms that the available wind resource is sufficient for offshore wind to be a large-scale contributor to the nation's electric energy supply.

  14. Electric vehicles: Technology assessment and commercialization

    International Nuclear Information System (INIS)

    Zabot, S.

    1991-01-01

    This article traces the history of commercialization efforts relative to electric vehicles, assesses the state-of-the-art of electric vehicle technology and identifies the industrial firms that are investing heavily in this field. The main design problems affecting the commercialization of these vehicles (e.g., battery weight, autonomy, operating safety and toxicity) are pointed out. Comparisons of commercialization prospects are made with those for hydrogen fuelled vehicles. With regard to investments in research programs, it is argued that, in addition to car manufacturers and oil companies, the usual active participants in the transport sector, new participants are needed to give added support to the development of electric vehicles, namely, electric utilities and battery manufacturers

  15. An Assessment of Emerging Wireless Broadband Technologies

    National Research Council Canada - National Science Library

    Fountanas, Leonidas

    2001-01-01

    ... technologies in providing broadband services today, emerging wireless broadband technologies are expected to significantly increase their market share over the next years, Deploying a wireless network...

  16. Expanding Health Technology Assessments to Include Effects on the Environment.

    Science.gov (United States)

    Marsh, Kevin; Ganz, Michael L; Hsu, John; Strandberg-Larsen, Martin; Gonzalez, Raquel Palomino; Lund, Niels

    2016-01-01

    There is growing awareness of the impact of human activity on the climate and the need to stem this impact. Public health care decision makers from Sweden and the United Kingdom have started examining environmental impacts when assessing new technologies. This article considers the case for incorporating environmental impacts into the health technology assessment (HTA) process and discusses the associated challenges. Two arguments favor incorporating environmental impacts into HTA: 1) environmental changes could directly affect people's health and 2) policy decision makers have broad mandates and objectives extending beyond health care. Two types of challenges hinder this process. First, the nascent evidence base is insufficient to support the accurate comparison of technologies' environmental impacts. Second, cost-utility analysis, which is favored by many HTA agencies, could capture some of the value of environmental impacts, especially those generating health impacts, but might not be suitable for addressing broader concerns. Both cost-benefit and multicriteria decision analyses are potential methods for evaluating health and environmental outcomes, but are less familiar to health care decision makers. Health care is an important and sizable sector of the economy that could warrant closer policy attention to its impact on the environment. Considerable work is needed to track decision makers' demands, augment the environmental evidence base, and develop robust methods for capturing and incorporating environmental data as part of HTA. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  17. Development of integrated accident management assessment technology

    International Nuclear Information System (INIS)

    Jung, Won Dea; Ha, Jae Joo; Jin, Young Ho

    2002-04-01

    This project aims to develop critical technologies for accident management through securing evaluation frameworks and supporting tools, in order to enhance capabilities coping with severe accidents. For the research goal, firstly under the viewpoint of accident prevention, on-line risk monitoring system and the analysis framework for human error have been developed. Secondly, the training/supporting systems including the training simulator and the off-site risk evaluation system have been developed to enhance capabilities coping with severe accidents. Four kinds of research results have been obtained from this project. Firstly, the framework and taxonomy for human error analysis has been developed for accident management. As the second, the supporting system for accident managements has been developed. Using data that are obtained through the evaluation of off-site risk for Younggwang site, the risk database as well as the methodology for optimizing emergency responses has been constructed. As the third, a training support system, SAMAT, has been developed, which can be used as a training simulator for severe accident management. Finally, on-line risk monitoring system, DynaRM, has been developed for Ulchin 3 and 4 unit

  18. Wearable technology for spine movement assessment: A systematic review.

    Science.gov (United States)

    Papi, Enrica; Koh, Woon Senn; McGregor, Alison H

    2017-11-07

    Continuous monitoring of spine movement function could enhance our understanding of low back pain development. Wearable technologies have gained popularity as promising alternative to laboratory systems in allowing ambulatory movement analysis. This paper aims to review the state of art of current use of wearable technology to assess spine kinematics and kinetics. Four electronic databases and reference lists of relevant articles were searched to find studies employing wearable technologies to assess the spine in adults performing dynamic movements. Two reviewers independently identified relevant papers. Customised data extraction and quality appraisal form were developed to extrapolate key details and identify risk of biases of each study. Twenty-two articles were retrieved that met the inclusion criteria: 12 were deemed of medium quality (score 33.4-66.7%), and 10 of high quality (score >66.8%). The majority of articles (19/22) reported validation type studies. Only 6 reported data collection in real-life environments. Multiple sensors type were used: electrogoniometers (3/22), strain gauges based sensors (3/22), textile piezoresistive sensor (1/22) and accelerometers often used with gyroscopes and magnetometers (15/22). Two sensors units were mainly used and placing was commonly reported on the spine lumbar and sacral regions. The sensors were often wired to data transmitter/logger resulting in cumbersome systems. Outcomes were mostly reported relative to the lumbar segment and in the sagittal plane, including angles, range of motion, angular velocity, joint moments and forces. This review demonstrates the applicability of wearable technology to assess the spine, although this technique is still at an early stage of development. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  19. Assessment of Offshore Wind Energy Resources for the United States

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, M.; Heimiller, D.; Haymes, S.; Musial, W.

    2010-06-01

    This report summarizes the offshore wind resource potential for the contiguous United States and Hawaii as of May 2009. The development of this assessment has evolved over multiple stages as new regional meso-scale assessments became available, new validation data was obtained, and better modeling capabilities were implemented. It is expected that further updates to the current assessment will be made in future reports.

  20. Fission Surface Power Technology Demonstration Unit Test Results

    Science.gov (United States)

    Briggs, Maxwell H.; Gibson, Marc A.; Geng, Steven M.; Sanzi, James L.

    2016-01-01

    The Fission Surface Power (FSP) Technology Demonstration Unit (TDU) is a system-level demonstration of fission power technology intended for use on manned missions to Mars. The Baseline FSP systems consists of a 190 kWt UO2 fast-spectrum reactor cooled by a primary pumped liquid metal loop. This liquid metal loop transfers heat to two intermediate liquid metal loops designed to isolate fission products in the primary loop from the balance of plant. The intermediate liquid metal loops transfer heat to four Stirling Power Conversion Units (PCU), each of which produce 12 kWe (48 kW total) and reject waste heat to two pumped water loops, which transfer the waste heat to titanium-water heat pipe radiators. The FSP TDU simulates a single leg of the baseline FSP system using an electrically heater core simulator, a single liquid metal loop, a single PCU, and a pumped water loop which rejects the waste heat to a Facility Cooling System (FCS). When operated at the nominal operating conditions (modified for low liquid metal flow) during TDU testing the PCU produced 8.9 kW of power at an efficiency of 21.7 percent resulting in a net system power of 8.1 kW and a system level efficiency of 17.2 percent. The reduction in PCU power from levels seen during electrically heated testing is the result of insufficient heat transfer from the NaK heater head to the Stirling acceptor, which could not be tested at Sunpower prior to delivery to the NASA Glenn Research Center (GRC). The maximum PCU power of 10.4 kW was achieved at the maximum liquid metal temperature of 875 K, minimum water temperature of 350 K, 1.1 kg/s liquid metal flow, 0.39 kg/s water flow, and 15.0 mm amplitude at an efficiency of 23.3 percent. This resulted in a system net power of 9.7 kW and a system efficiency of 18.7 percent.

  1. Institutionalising health technology assessment: establishing the Medical Technology Assessment Board in India.

    Science.gov (United States)

    Downey, Laura E; Mehndiratta, Abha; Grover, Ashoo; Gauba, Vijay; Sheikh, Kabir; Prinja, Shankar; Singh, Ravinder; Cluzeau, Francoise A; Dabak, Saudamini; Teerawattananon, Yot; Kumar, Sanjiv; Swaminathan, Soumya

    2017-01-01

    India is at crossroads with a commitment by the government to universal health coverage (UHC), driving efficiency and tackling waste across the public healthcare sector. Health technology assessment (HTA) is an important policy reform that can assist policy-makers to tackle inequities and inefficiencies by improving the way in which health resources are allocated towards cost-effective, appropriate and feasible interventions. The equitable and efficient distribution of health budget resources, as well as timely uptake of good value technologies, are critical to strengthen the Indian healthcare system. The government of India is set to establish a Medical Technology Assessment Board to evaluate existing and new health technologies in India, assist choices between comparable technologies for adoption by the healthcare system and improve the way in which priorities for health are set. This initiative aims to introduce a more transparent, inclusive, fair and evidence-based process by which decisions regarding the allocation of health resources are made in India towards the ultimate goal of UHC. In this analysis article, we report on plans and progress of the government of India for the institutionalisation of HTA in the country. Where India is home to one-sixth of the global population, improving the health services that the population receives will have a resounding impact not only for India but also for global health.

  2. History of health technology assessment in Belgium.

    Science.gov (United States)

    Cleemput, Irina; Van Wilder, Philippe

    2009-07-01

    This paper gives an overview of health technology assessment (HTA) in Belgium. The information included in the overview is based on legal documents and publicly available year reports of the Belgian Health Care Knowledge Centre (KCE). Belgium has a relatively young history in HTA. The principle of evidence-based medicine (EBM) was introduced in the drug reimbursement procedure in 2001, with the establishment of the Drug Reimbursement Committee (DRC). The DRC assesses the efficacy, safety, convenience, applicability, and effectiveness of a drug relative to existing treatment alternatives. For some drugs, relative cost-effectiveness is also evaluated. The activities of the DRC can, therefore, be considered to be the first official HTA activities in Belgium. Later, in 2003, KCE was established. Its mission was to perform policy preparing research in the healthcare and health insurance sector and to give advice to policy makers about how they can obtain an efficient allocation of limited healthcare resources that optimizes the quality and accessibility of health care. This broad mission has been operationalized by activities in three domains of research: HTA, health services research, and good clinical practice. KCE is independent from the policy maker. Its HTAs contain policy recommendations that may inform policy decisions but are not binding. Although the Belgian history of HTA is relatively short, its foundations are strong and the impact of HTA increasing. Nevertheless KCE has many challenges for the future, including continued quality assurance, further development of international collaboration, and further development of methodological guidance for HTA.

  3. Technology assessment Jordan Nuclear Power Plant Project

    International Nuclear Information System (INIS)

    2010-01-01

    Preliminary regional analysis was carried out for identification of potential sites for NPP, followed by screening of these sites and selecting candidate sites. Aqaba sites are proposed, where it can use the sea water for cooling: i.Site 1; at the sea where it can use the sea water for direct cooling. ii.Site 2; 10 km to the east of Gulf of Aqaba shoreline at the Saudi Arabia borders. iii.Site 3, 4 km to the east of Gulf of Aqaba shoreline. Only the granitic basement in the east of the 6 km²site should be considered as a potential site for a NPP. Preliminary probabilistic seismic hazard assessment gives: Operating-Basis Earthquake-OBE (475 years return period) found to be in the range of 0.163-0.182 g; Safe Shutdown Earthquake-SSE (10,000 years return period) found to be in the range of 0.333-0.502g. The process include also setting up of nuclear company and other organizational matters. Regulations in development are: Site approval; Construction permitting; Overall licensing; Safety (design, construction, training, operations, QA); Emergency planning; Decommissioning; Spent fuel and RW management. JAEC's technology assessment strategy and evaluation methodology are presented

  4. What Do They Understand? Using Technology to Facilitate Formative Assessment

    Science.gov (United States)

    Mitten, Carolyn; Jacobbe, Tim; Jacobbe, Elizabeth

    2017-01-01

    Formative assessment is so important to inform teachers' planning. A discussion of the benefits of using technology to facilitate formative assessment explains how four primary school teachers adopted three different apps to make their formative assessment more meaningful and useful.

  5. Society for Assisted Reproductive Technology and assisted reproductive technology in the United States: a 2016 update.

    Science.gov (United States)

    Toner, James P; Coddington, Charles C; Doody, Kevin; Van Voorhis, Brad; Seifer, David B; Ball, G David; Luke, Barbara; Wantman, Ethan

    2016-09-01

    The Society for Assisted Reproductive Technology (SART) was established within a few years of assisted reproductive technology (ART) in the United States, and has not only reported on the evolution of infertility care, but also guided it toward improved success and safety. Moving beyond its initial role as a registry, SART has expanded its role to include quality assurance, data validation, practice and advertising guidelines, research, patient education and advocacy, and membership support. The success of ART in this country has greatly benefited from SART's role, as highlighted by a series of graphs. SART continues to set the standard and lead the way. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  6. Desalination with thermal solar systems: technology assessment and perspectives

    International Nuclear Information System (INIS)

    Ajona, J.I.

    1992-01-01

    Solar desalination is among the most promising alternatives to apply solar energy as solar availability and the load requirements use to be matched. Solar thermal energy offers a full set of alternatives to desalt water, being the main difference among them the temperature range at which the load has to be fed. Solar technologies for the low temperature range (solar stills, plastic collectors,...) are quite suited for small loads in isolated placed or whenever the main constrain is to indigenize technology and to perform the operation and maintenance work with low qualified local labor, such as in less developed countries. The main drawback of this low temperature use of solar energy is that it is not possible to recover neither the heat of condensation of the water vapor, nor from the reject brine, to warm up the feed saline water. Higher temperature collectors, such as flat plate collectors with transparent insulation material and evacuated tubes, allow to work with conventional desalination units fed at 60-90C, as Multiple Effect Units or Multistage Flash Units, which get a performance ratio (quotient between heat required without recovery and with heat recovery) between 5 and 10. To further increase the performance ratio it is necessary to work with vapor in the 200C range. To attain this temperature range the solar option is based on the Parabolic Trough collector. This has been the line we have followed in our STD project in the Plataforma Solar in Almeria (Spain) when we have run a Multiple Effect Unit with an Absorption Heat Pump able to attain a performance ratio of 20. In this report, included within the STD project activities, we assess the potential of the solar thermal technology to desalt water in all the above mentioned temperature ranges. Beside the technology description and some characteristics results, we present a set of tool that, as the final result is dramatically dependent on the technical and economical scenario selected, will allow to

  7. The Rationalization of Automatic Units for HPDC Technology

    Directory of Open Access Journals (Sweden)

    A. Herman

    2012-04-01

    Full Text Available The paper deals with problem of optimal used automatic workplace for HPDC technology - mainly from aspects of operations sequence, efficiency of work cycle and planning of using and servicing of HPDC casting machine. Presented are possible ways to analyse automatic units for HPDC. The experimental part was focused on the rationalization of the current work cycle time for die casting of aluminium alloy. The working place was described in detail in the project. The measurements were carried out in detail with the help of charts and graphs mapped cycle of casting workplace. Other parameters and settings have been identified.The proposals for improvements were made after the first measurements and these improvements were subsequently verified. The main actions were mainly software modifications of casting center. It is for the reason that today's sophisticated workplaces have the option of a relatively wide range of modifications without any physical harm to machines themselves. It is possible to change settings or unlock some unsatisfactory parameters.

  8. United States Department of Energy solar receiver technology development

    Science.gov (United States)

    Klimas, P. C.; Diver, R. B.; Chavez, J. M.

    The United States Department of Energy (DOE), through Sandia National Laboratories, has been conducting a Solar Thermal Receiver Technology Development Program, which maintains a balance between analytical modeling, bench and small scale testing, and experimentation conducted at scales representative of commercially-sized equipment. Central receiver activities emphasize molten salt-based systems on large scales and volumetric devices in the modeling and small scale testing. These receivers are expected to be utilized in solar power plants rated between 100 and 200 MW. Distributed receiver research focuses on liquid metal refluxing devices. These are intended to mate parabolic dish concentrators with Stirling cycle engines in the 5 to 25 kW(sub e) power range. The effort in the area of volumetric receivers is less intensive and highly cooperative in nature. A ceramic foam absorber of Sandia design was successfully tested on the 200 kW(sub t) test bed at Plataforma Solar during 1989. Material integrity during the approximately 90-test series was excellent. Significant progress has been made with parabolic dish concentrator-mounted receivers using liquid metals (sodium or a potassium/sodium mixture) as heat transport media. Sandia has successfully solar-tested a pool boiling reflux receiver sized to power a 25 kW Stirling engine. Boiling stability and transient operation were both excellent. This document describes these activities in detail and will outline plans for future development.

  9. Health technology assessment: the process in Brazil.

    Science.gov (United States)

    Lessa, Fernanda; Ferraz, Marcos Bosi

    2017-06-08

    To describe, analyze, and compare the opinions of decisionmakers involved in the health technology assessment (HTA) process in Brazil in 2011. A cross-sectional study was conducted using a structured questionnaire to evaluate the opinions of a convenience sample of health care professionals from both the public and private health care systems (HCS). The survey collected demographic data for each respondent along with their input on national regulations. Data analysis included descriptive statistics, including chi-square tests to compare groups. Of the 200 completed questionnaires, 65% of the respondents were 31-50 years of age; 36% were HCS managers, 49.3% from the public and 50.7% from the private system. The majority of respondents (85%) considered the time permitted for submission of new technology to be inadequate; 88% also stated that the composition of the evaluation committee needed improvement. Respondents from the private health system more frequently stated that submission times were inappropriate (P = 0.019) and that the deadline for a decision by the committee should be defined (P = 0.021), with a maximum of no more than 180 days / 6 months (P < 0.001). Respondents indicated that the HTA process should be improved to meet their expectations. Given that new legislation has been enacted to continuously accept submissions, to make decisions within 180 days, and to expand the committee to represent more stakeholders, most of the respondents concerns have been addressed. This study is valuable as an historical analysis of HTA process improvement. Further surveys are needed to track the new HTA process, its application, and its contribution to health care needs in Brazil.

  10. ART AND TECHNOLOGY: ASSESSING THEIR SYMBIOTIC ...

    African Journals Online (AJOL)

    Uche

    influence of technology is the industrial designs or applied arts. Ekong and Ekong ... draw and photoshop said that with technology, production in graphics design and printing now comes with ..... traps and guns were manufactured. So why do ...

  11. SUSTAINABILITY LOGISTICS BASING SCIENCE AND TECHNOLOGY OBJECTIVE DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT

    Science.gov (United States)

    2018-03-22

    BASING SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT by Gregg J. Gildea Paul D. Carpenter Benjamin J...Campbell William F. Harris* Michael A. McCluskey** and José A. Miletti*** *General Dynamics Information Technology Fairfax, VA 22030 **Maneuver...SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

  12. Multi-Criteria Sustainability Assessment of Urban Sludge Treatment Technologies

    DEFF Research Database (Denmark)

    An, Da; Xi, Beidou; Ren, Jingzheng

    2017-01-01

    to determine the weights of the criteria for sustainability assessment, and extension theory was used to prioritize the alternative technologies for the treatment of urban sewage sludge and grade their sustainability performances. An illustrative case including three technologies (compositing, incineration...

  13. Miniaturized Power Processing Unit Study: A Cubesat Electric Propulsion Technology Enabler Project

    Science.gov (United States)

    Ghassemieh, Shakib M.

    2014-01-01

    This study evaluates High Voltage Power Processing Unit (PPU) technology and driving requirements necessary to enable the Microfluidic Electric Propulsion technology research and development by NASA and university partners. This study provides an overview of the state of the art PPU technology with recommendations for technology demonstration projects and missions for NASA to pursue.

  14. Environmental assessment report: Nuclear Test Technology Complex

    International Nuclear Information System (INIS)

    Tonnessen, K.; Tewes, H.A.

    1982-08-01

    The US Department of Energy (USDOE) is planning to construct and operate a structure, designated the Nuclear Test Technology Complex (NTTC), on a site located west of and adjacent to the Lawrence Livermore National Laboratory. The NTTC is designed to house 350 nuclear test program personnel, and will accommodate the needs of the entire staff of the continuing Nuclear Test Program (NTP). The project has three phases: land acquisition, facility construction and facility operation. The purpose of this environmental assessment report is to describe the activities associated with the three phases of the NTTC project and to evaluate potential environmental disruptions. The project site is located in a rural area of southeastern Alameda County, California, where the primary land use is agriculture; however, the County has zoned the area for industrial development. The environmental impacts of the project include surface disturbance, high noise levels, possible increases in site erosion, and decreased air quality. These impacts will occur primarily during the construction phase of the NTTC project and can be mitigated in part by measures proposed in this report

  15. Problems of method of technology assessment

    International Nuclear Information System (INIS)

    Zimmermann, V.

    1993-03-01

    The study undertakes to analyse the theoretical and methodological structure of Technology Assessment (TA). It is based on a survey of TA studies which provided an important condition for theoreticall sound statements on methodological aspects of TA. It was established that the main basic theoretical problems of TA are in the field of dealing with complexity. This is also apparent in the constitution of problems, the most elementary and central approach of TA. Scientifically founded constitution of problems and the corresponding construction of models call for interdisciplinary scientific work. Interdisciplinarity in the TA research process is achieved at the level of virtual networks, these networks being composed of individuals suited to teamwork. The emerging network structures have an objective-organizational and an ideational basis. The objective-organizational basis is mainly the result of team composition and the external affiliations of the team members. The ideational basis of the virtual network is represented by the team members' mode of thinking, which is individually located at a multidisciplinary level. The theoretical 'skeleton' of the TA knowledge system, which is represented by process knowledge based linkage structures, can be generated and also processed in connection with the knowledge on types of problems, areas of analysis and procedures to deal with complexity. Within this process, disciplinary knowledge is a necessary but not a sufficient condition. Metatheoretical and metadisciplinary knowledge and the correspondingly processes complexity of models are the basis for the necessary methodological awareness, that allows TA to become designable as a research procedure. (orig./HP) [de

  16. Health technology assessment in Saudi Arabia.

    Science.gov (United States)

    Al-Aqeel, Sinaa

    2018-05-16

    The Saudi government, similar to any other government, is committed to making public spending more efficient, using resources more effectively, and limiting waste. Health technology assessment (HTA) is a tool that informs policy and decision makers regarding the formulation of safe and effective policies that are patient-focused and help to achieve efficiency when allocating limited health-care resources. Areas covered: After a brief description of HTA in the international context, this review provides a brief introduction to Saudi Arabia's health-care system, followed by a delineation of the decision maker(s) and influencers and the decision-making process for pricing and reimbursement. The article then discusses the current status of HTA in Saudi Arabia and proposes four strategic objectives that can form the first step in the development of a formal HTA process. Expert commentary: In Saudi Arabia, facilitators for incorporating HTA into the decision-making process exist. Future local research is needed to guide the implementation of full HTA.

  17. The Office for Technology Assessment with the German Parliament (TAB)

    International Nuclear Information System (INIS)

    Grunwald, A.; Petermann, T.

    2004-01-01

    TAB was created in 1990 with the aim of providing contributions to the improvement of the information base, particularly for parliamentary decision-making concerning science and technology. Among TAB's tasks are above all the conception and execution of technology assessment projects and the monitoring and analysis of important scientific and technological trends and related societal developments. TAB is managed by the Institute for Technology Assessment and Systems Analysis (ITAS) of the Karlsruhe Research Center. (orig.)

  18. Review and assessments of potential environmental, health and safety impacts of MHD technology. Final draft

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    The purpose of this document is to develop an environmental, health and safety (EH and S) assessment and begin a site - specific assessment of these and socio - economic impacts for the magnetohydrodynamics program of the United States Department of Energy. This assessment includes detailed scientific and technical information on the specific EH and S issues mentioned in the MHD Environmental Development Plan. A review of current literature on impact-related subjects is also included. This document addresses the coal-fired, open-cycle MHD technology and reviews and assesses potential EH and S impacts resulting from operation of commercially-installed technology.

  19. Groundwater Monitoring Plan for the Reactor Technology Complex Operable Unit 2-13

    International Nuclear Information System (INIS)

    Richard P. Wells

    2007-01-01

    This Groundwater Monitoring Plan describes the objectives, activities, and assessments that will be performed to support the on-going groundwater monitoring requirements at the Reactor Technology Complex, formerly the Test Reactor Area (TRA). The requirements for groundwater monitoring were stipulated in the Final Record of Decision for Test Reactor Area, Operable Unit 2-13, signed in December 1997. The monitoring requirements were modified by the First Five-Year Review Report for the Test Reactor Area, Operable Unit 2-13, at the Idaho National Engineering and Environmental Laboratory to focus on those contaminants of concern that warrant continued surveillance, including chromium, tritium, strontium-90, and cobalt-60. Based upon recommendations provided in the Annual Groundwater Monitoring Status Report for 2006, the groundwater monitoring frequency was reduced to annually from twice a year

  20. Assisted Reproductive Technology Surveillance - 
United States, 2013.

    Science.gov (United States)

    Sunderam, Saswati; Kissin, Dmitry M; Crawford, Sara B; Folger, Suzanne G; Jamieson, Denise J; Warner, Lee; Barfield, Wanda D

    2015-12-04

    Since the first U.S. infant conceived with assisted reproductive technology (ART) was born in 1981, both the use of ART and the number of fertility clinics providing ART services have increased steadily in the United States. ART includes fertility treatments in which eggs or embryos are handled in the laboratory (i.e., in vitro fertilization [IVF] and related procedures). Women who undergo ART procedures are more likely than women who conceive naturally to deliver multiple-birth infants. Multiple births pose substantial risks to both mothers and infants, including obstetric complications, preterm delivery, and low birthweight infants. This report provides state-specific information for the United States (including Puerto Rico) on ART procedures performed in 2013 and compares infant outcomes that occurred in 2013 (resulting from ART procedures performed in 2012 and 2013) with outcomes for all infants born in the United States in 2013. 2013. In 1996, CDC began collecting data on ART procedures performed in fertility clinics in the United States as mandated by the Fertility Clinic Success Rate and Certification Act of 1992 (FCSRCA) (Public Law 102-493). Data are collected through the National ART Surveillance System (NASS), a web-based data collection system developed by CDC. This report includes data from 52 reporting areas (the 50 states, the District of Columbia [DC], and Puerto Rico). In 2013, a total of 160,521 ART procedures (range: 109 in Wyoming to 20,299 in California) with the intent to transfer at least one embryo were performed in 467 U.S. fertility clinics and were reported to CDC. These procedures resulted in 53,252 live-birth deliveries (range: 47 in Alaska to 6,979 in California) and 66,691 infants (range: 61 in Alaska to 8,649 in California). Nationally, the total number of ART procedures performed per million women of reproductive age (15-44 years), a proxy measure of the ART usage rate, was 2,521 (range: 352 in Puerto Rico to 7,688 in DC). ART use

  1. Identification of Promising Remediation Technologies for Iodine in the UP-1 Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    Strickland, Christopher E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Christian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lee, Brady D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qafoku, Nikolla [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Szecsody, James E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Truex, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Vermeul, Vincent R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-09-01

    Iodine-129 (129I) generated at the U.S. Department of Energy (DOE) Hanford Site during plutonium production was released to the subsurface, resulting in several large, though dilute, plumes in the groundwater, including the plume in the 200-UP-1 operable unit (OU). Because 129I is an uncommon contaminant, relevant remediation experience and scientific literature are limited, though work is under way to better understand the fate and transport of 129I in the environment and the effectiveness of potential remediation technologies. The recent UP-1 Evaluation Plan for Iodine and report on the Conceptual Model of Iodine Behavior in the Subsurface at the Hanford Site provide information on the history of contamination in the 200-UP-1 OU, relevant controlling processes (biological and geochemical), risk, the conceptual site model, and potential remedial options, which provided a foundation for this study. In this study, available information was compiled and used to categorize potential remediation technologies, culminating in a recommendation of promising technologies for further evaluation. Approaches to improve the technical information about promising technologies are also recommended in this study so that a subsequent evaluation of potential remediation alternatives can assess these technologies.

  2. Assessment of delirium in the intensive care unit | Kallenbach ...

    African Journals Online (AJOL)

    Delirium poses a significant burden on our healthcare, with patients in the intensive care unit (ICU) at an increased risk for developing this disorder. In addition, the ICU environment poses unique challenges in the assessment of delirium. It is paramount that the healthcare provider has an understanding of delirium in ICU, ...

  3. An environmental assessment of United States drinking water watersheds

    Science.gov (United States)

    James Wickham; Timothy Wade; Kurt Riitters

    2011-01-01

    Abstract There is an emerging recognition that natural lands and their conservation are important elements of a sustainable drinking water infrastructure. We conducted a national, watershed-level environmental assessment of 5,265 drinking water watersheds using data on land cover, hydrography and conservation status. Approximately 78% of the conterminous United States...

  4. INFORMATION AND COMMUNICATION TECHNOLOGIES TRAINING: CRITERIA FOR INTERNAL QUALITY ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Oleg M. Spirin

    2011-02-01

    Full Text Available In the article the concept of information and communication technology training is specified. It is grounded an internal criteria of information and communication technologies training quality assessment based on experience of the organization, carrying out, analysis of experimental work results on quality assessment of designing, working out, efficiency of methodical system of informatics teachers base vocational training introduction in the conditions of credit-modular technology. Indicators and approaches of their assessment to define the criteria degree are resulted. Indicators of criteria "level differentiation", "individualization" and "intensification" of educational process for information and communication technologies training quality assessment are specified.

  5. Consistent adoption of the International System of Units (SI) in nuclear science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Klumpar, J; Kovar, Z [Ceskoslovenska Akademie Ved, Prague. Laborator Radiologicke Dozimetrie; Sacha, J [Slovenska Akademia Vied, Bratislava (Czechoslovakia). Fyzikalny Ustav

    1975-11-01

    The principles are stressed behind a consistent introduction of the International System of Units (SI) in Czechoslovakia complying with the latest edition of the Czechoslovak Standard CSN 01 1300 on the prescribed system of national and international units. The use of special and auxiliary units in nuclear physics and technology is discussed, particular attention being devoted to the units of activity and to the time units applied in radiology. Conversion graph and tables are annexed.

  6. Development of Integrated Assessment Technology of Risk and Performance

    International Nuclear Information System (INIS)

    Yang, Jun Eon; Kang, Dae Il; Kang, Hyun Gook

    2010-04-01

    The main idea and contents are summarized as below 1) Development of new risk/performance assessment system innovating old labor-intensive risk assessment structure - New consolidated risk assessment technology from various hazard(flood, fire, seismic in NPP) - BOP model development for performance monitoring - Consolidated risk/performance management system for consistency and efficiency of NPP 2) Resolution technology for pending issues in PSA - Base technology for PSA of digital I and C system - Base technology for seismic PSA reflecting domestic seismic characteristics and aging effect - Uncertainty reduction technology for level 2 PSA and best estimation of containment failure frequency 3) Next generation risk/performance assessment technology - Human-induced error reduction technology for efficient operation of a NPP

  7. Propulsion Control Technology Development in the United States A Historical Perspective

    Science.gov (United States)

    Jaw, Link C.a; Garg, Sanjay

    2005-01-01

    This paper presents a historical perspective of the advancement of control technologies for aircraft gas turbine engines. The paper primarily covers technology advances in the United States in the last 60 years (1940 to approximately 2002). The paper emphasizes the pioneering technologies that have been tested or implemented during this period, assimilating knowledge and experience from industry experts, including personal interviews with both current and retired experts. Since the first United States-built aircraft gas turbine engine was flown in 1942, engine control technology has evolved from a simple hydro-mechanical fuel metering valve to a full-authority digital electronic control system (FADEC) that is common to all modern aircraft propulsion systems. At the same time, control systems have provided engine diagnostic functions. Engine diagnostic capabilities have also evolved from pilot observation of engine gauges to the automated on-board diagnostic system that uses mathematical models to assess engine health and assist in post-flight troubleshooting and maintenance. Using system complexity and capability as a measure, we can break the historical development of control systems down to four phases: (1) the start-up phase (1942 to 1949), (2) the growth phase (1950 to 1969), (3) the electronic phase (1970 to 1989), and (4) the integration phase (1990 to 2002). In each phase, the state-of-the-art control technology is described and the engines that have become historical landmarks, from the control and diagnostic standpoint, are identified. Finally, a historical perspective of engine controls in the last 60 years is presented in terms of control system complexity, number of sensors, number of lines of software (or embedded code), and other factors.

  8. Assessment of teamwork during structured interdisciplinary rounds on medical units.

    Science.gov (United States)

    O'Leary, Kevin J; Boudreau, Yvonne N; Creden, Amanda J; Slade, Maureen E; Williams, Mark V

    2012-01-01

    Interdisciplinary rounds (IDR) provide a means to assemble hospital team members and improve collaboration. Little is known about teamwork during IDR. To evaluate and characterize teamwork during IDR. Cross-sectional observational study. Six medical units which had implemented structured interdisciplinary rounds (SIDR). We adapted the Observational Teamwork Assessment for Surgery (OTAS) tool, a behaviorally anchored rating scale shown to be reliable and valid in surgical settings. OTAS provides scores ranging from 0 to 6 (0 = problematic behavior; 6 = exemplary behavior) across 5 domains (communication, coordination, cooperation/backup behavior, leadership, and monitoring/situational awareness) and for prespecified subteams. Two researchers conducted direct observations using the adapted OTAS tool. We conducted 7-8 independent observations for each unit (total = 44) and 20 joint observations. Inter-rater reliability was excellent at the unit level (Spearman's rho = 0.75), and good across domains (rho = 0.53-0.68) and subteams (rho = 0.53-0.76) with the exception of the physician subteam, for which it was poor (rho = 0.35). Though teamwork scores were generally high, we found differences across units, with a median (interquartile range [IQR]) 4.5 (3.9-4.9) for the lowest and 5.4 (5.3-5.5) for the highest performing unit (P teamwork during SIDR across units, domains, and most subteams. Variation in performance suggests a need to improve consistency of teamwork and emphasizes the importance of leadership. Copyright © 2012 Society of Hospital Medicine.

  9. Technology in the United Kingdom’s Higher Education Context

    OpenAIRE

    Price, Linda; Kirkwood, Adrian

    2008-01-01

    Frequently, university-wide strategic decisions about technology are made without fully understanding the implications for resources, administration, teaching programmes, teaching practices and learning approaches, often resulting in technology-led course designs. Yet evidence shows that it is not the technology per se that changes learning and teaching but the pedagogical advantage we make of its use. In parallel, professional development programmes have largely focused on how to use the tec...

  10. Assessment methods in surgical training in the United Kingdom

    Directory of Open Access Journals (Sweden)

    Evgenios Evgeniou

    2013-02-01

    Full Text Available A career in surgery in the United Kingdom demands a commitment to a long journey of assessment. The assessment methods used must ensure that the appropriate candidates are selected into a programme of study or a job and must guarantee public safety by regulating the progression of surgical trainees and the certification of trained surgeons. This review attempts to analyse the psychometric properties of various assessment methods used in the selection of candidates to medical school, job selection, progression in training, and certification. Validity is an indicator of how well an assessment measures what it is designed to measure. Reliability informs us whether a test is consistent in its outcome by measuring the reproducibility and discriminating ability of the test. In the long journey of assessment in surgical training, the same assessment formats are frequently being used for selection into a programme of study, job selection, progression, and certification. Although similar assessment methods are being used for different purposes in surgical training, the psychometric properties of these assessment methods have not been examined separately for each purpose. Because of the significance of these assessments for trainees and patients, their reliability and validity should be examined thoroughly in every context where the assessment method is being used.

  11. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  12. Methodology of constructive technology assessment in health care

    NARCIS (Netherlands)

    Douma, Kirsten F. L.; Karsenberg, Kim; Hummel, Marjan J. M.; Bueno-de-Mesquita, Jolien M.; van Harten, Wim H.

    2007-01-01

    OBJECTIVES: Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical

  13. Beyond checklists: toward an ethical-constructive technology assessment

    NARCIS (Netherlands)

    Kiran, Asle; Oudshoorn, Nelly E.J.; Verbeek, Peter P.C.C.

    2015-01-01

    While many technology assessments (TAs) formally conducted by TA organizations in Europe and the USA have examined the implications of new technologies for ‘quantifiable risks’ regarding safety, health or the environment, they have largely ignored the ethical implications of those technologies.

  14. Methodology of constructive technology assessment in health care

    NARCIS (Netherlands)

    Douma, Kirsten F.L.; Hummel, J. Marjan; Karsenberg, Kim; van Harten, Willem H.; Bueno-de-Mesquita, Jolien M.

    2007-01-01

    Objectives: Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical

  15. A critical assessment of fuel cell technology

    International Nuclear Information System (INIS)

    Lindstroem, O.

    1994-01-01

    Cold combustion is a promised technology to mankind since the middle of the last century. The fuel cell may at last become the energy machine of the one to come after a long journey on a road bordered with expectations, successes and disappointments. Ten billion people will need the cell for their well-being. The progress and the state-of-art is assessed by means of figures of merit for performance, normalized to standard conditions, life and variability. State-of-art current densities for multi-kW stacks operating on atmospheric pressure air at 0.74 V cell voltage (50% efficiency, HHV) are estimated to be 150 mA/cm 2 for MCFC, 160 mA/cm 2 for AFC, 239 mA/cm 2 for PEFC and 270 mA/cm 2 for SOFC. PAFC gives 260 mA/cm 2 at 0.66 V and DMFC 100 mA/cm 2 at 0.37 V. Decay rates are about 1%/1000 h for PEFC, PAFC and SOFC compared to 2%/1000 h for AFC and 3%/1000 h for MCFC. Coefficients of variation for cell voltages amount to about 1% for all options, except for MCFC with 3-4%. Improvement of cell performance after 1975 is nil to moderate, except for SOFC with a consistent annual improvement of about 10%. There is room for further development of terrestrial AFCs towards 300-400 mA/cm 2 considering the figure 800 mA/cm 2 for oxygen AFCs. Life and cost will decide the future of the fuel cell. Prospects are not as good as they could be. The fuel cell community lacks understanding of the basics of fuel processing, as demonstrated by the widespread misbelief ('the CO 2 syndrome') that CO 2 cannot be removed cost effectively from a hydrogen feed (which is practiced in every NH 3 plant around the world). The competition, read the gas turbine, has to be taken very seriously. Emphasis has to be shifted from premature demonstrations to R and D on fundamental problems, which have been around too long. 34 refs

  16. United States panel presentations[Nuclear power technology in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Beyea, J [National Audubon Society, New York, NY (United States)

    1990-07-01

    Before I begin I have to make a disclaimer. That is that I am going to be talking about public perception because I think that is very important. But I do not want to give the impression that I think the public is wrong. I happen to agree with the public's perception of nuclear power, and I want to make that clear. I do not like the current generation of nuclear plants as I have made clear in many statements that I have made. On the other hand, in the long term, I feel that we have only two choices on the supply side, and that is nuclear power and solar electricity. And although I think solar electricity has the best chance, I am realistic enough to know that technologies do not always work the way I want. And so I think it is necessary to have at least some kind of nuclear option available. On the other hand, I do not think just any kind of nuclear technology will do. I want to talk to you about the conditions that I think you have to take into account when you try to design reactors that are publicly acceptable. I look at this as an insurance policy. Again, I do not want to be misquoted: I think nuclear power should be considered as an insurance policy, not as our first line of defense. Having made those disclaimers, what we need to do is set out a problem statement. The problem statement I set out is, 'How could one design and demonstrate a nuclear reactor that would regain public confidence in the United States, if one chose to do that?' By regaining confidence, I mean regaining sufficient confidence to site reactors at a number of locations. It is a pretty heavy task because the public cannot judge the technical issues. They have to judge the players by their characters and their histories, just as the way we calibrate anyone that knows things that we do not. I have three theses that I think are crucial. The first is that people do not believe in the claims of advocates, of any point of view, not just nuclear power, once the advocates have been proved wrong on

  17. Assessment of technology generating institutions in biotechnology ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-05-18

    May 18, 2009 ... biotechnology innovation system of South-Eastern. Nigeria. E. N. Ajani ... technology is the application of indigenous and / or scientific knowledge to ... developing societies, with the exception of China and. Argentina, (James ...

  18. How to measure technology assessment: an introduction

    NARCIS (Netherlands)

    Hasman, Arie

    2014-01-01

    This contribution introduces the Technology Acceptance model. Since information systems are still underutilized, application of models of user acceptance can provide important clues about what can be done to increase system usage

  19. Developing maintenance technologies for FBR's heat exchanger units by advanced laser processing

    International Nuclear Information System (INIS)

    Nishimura, Akihiko; Shimada, Yukihiro

    2011-01-01

    Laser processing technologies were developed for the purpose of maintenance of FBR's heat exchanger units. Ultrashort laser processing fabricated fiber Bragg grating sensor for seismic monitoring. Fiber laser welding with a newly developed robot system repair cracks on inner wall of heat exchanger tubes. Safety operation of the heat exchanger units will be improved by the advanced laser processing technologies. These technologies are expected to be applied to the maintenance for the next generation FBRs. (author)

  20. How to make participatory technology assessment in agriculture more 'participatory'

    DEFF Research Database (Denmark)

    Tavella, Elena

    2016-01-01

    the cultivation of new GM plants in Denmark. Furthermore, through this illustration, the term Participatory Technology Assessment (PTA) is redefined, thereby suggesting two additional aspects to assessing new technologies – following and evaluating policy making – to be considered in the conduct of PTA....

  1. Sustaining Innovation: Developing an Instructional Technology Assessment Process

    Science.gov (United States)

    Carmo, Monica Cristina

    2013-01-01

    This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

  2. Principles of sustainability science to assess alternative energy technologies

    CSIR Research Space (South Africa)

    Brent, AC

    2009-04-01

    Full Text Available , adaptive capacity, and complexity of social-ecological systems to assess the potential of such technologies for increasing the carrying capacity and improving the resilience of social-ecological systems, or to assess the resilience of the technological...

  3. Uniting Legislation with RFID Privacy-Enhancing Technologies

    NARCIS (Netherlands)

    Rieback, M.R.; Crispo, B.; Tanenbaum, A.S.

    2005-01-01

    RFID is a popular identification and automation technology with serious security and privacy threats. Legislation expounds upon the actual security and privacy needs of people in RFID-enabled environments, while technology helps to ensure legal compliance. This paper examines the main aims of RFID

  4. Participatory Technology and Constraints Assessment to Improve ...

    African Journals Online (AJOL)

    Beekeeping is a long-standing practice in the rural communities of Ethiopia and appears as ancient history of the country. A three–part assessment and diagnostic study (Livelihood systems assessment, integrated honeybee management needs assessment and diagnostic survey) was undertaken from 2006-2008 in Tigray, ...

  5. The Journey towards Technological Literacy for All in the United States--Are We There Yet?

    Science.gov (United States)

    Reed, Philip A.

    2007-01-01

    This article aims to examine if technology education is getting close to the destination of technological literacy for all in the United States. People now live at a point where all those interested in technological literacy must take a critical, unrelenting look at the profession's history, research base, and contemporary practice. Here, the…

  6. Assessment of selected furnace technologies for RWMC waste

    International Nuclear Information System (INIS)

    Batdorf, J.; Gillins, R.; Anderson, G.L.

    1992-03-01

    This report provides a description and initial evaluation of five selected thermal treatment (furnace) technologies, in support of earlier thermal technologies scoping work for application to the Idaho National Engineering Laboratory Radioactive Waste Management Complex (RWMC) buried wastes. The cyclone furnace, molten salt processor, microwave melter, ausmelt (fuel fired lance) furnace, and molten metal processor technologies are evaluated. A system description and brief development history are provided. The state of development of each technology is assessed, relative to treatment of RWMC buried waste

  7. Predicting technology operational availability using technical maturity assessment

    International Nuclear Information System (INIS)

    Kenley, C.R.; Creque, T.R.

    1998-01-01

    A technical maturity assessment method was performed by systems engineers in collaboration with an advisory panel composed of team members from different Department of Energy sites and from different engineering and science disciplines. Various stabilization technologies were assessed annually as to their relative maturity and availability for use in stabilizing nuclear materials. After three years of assessments, several of the technologies are now components of operational systems. A regression analysis of the historical assessments was performed, and it was concluded that the numerical technical maturity score produced by a team of experts can provide a powerful predictor of the time remaining until the operational application of technologies

  8. Risk assessment and management approaches on mental health units.

    Science.gov (United States)

    Woods, P

    2013-11-01

    This exploratory and descriptive study took place in one Canadian province. The study aimed to: (1) to identify and describe the nature and extent of current risk assessment and management approaches used in the adult inpatient mental health and forensic units; and (2) to identify good practice and shortfalls in the nature and extent of the approaches currently utilized. Data were collected from 48 participants through nine focus groups. Participants reported that they used a clinical approach to risk assessment. They had also not considered risk assessment and management as a proactive structured process. Education and training was also limited and skills were developed over time through practice. Five keys issues are discussed as important: reliance on clinical judgement alone is not the best choice to make; the need to consider risk as a whole concept; risk management being more reactive than proactive; education and training; and client involvement in risk assessment. © 2012 John Wiley & Sons Ltd.

  9. United States geothermal technology: Equipment and services for worldwide applications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    This document has two intended audiences. The first part, ``Geothermal Energy at a Glance,`` is intended for energy system decision makers and others who are interested in wide ranging aspects of geothermal energy resources and technology. The second part, ``Technology Specifics,`` is intended for engineers and scientists who work with such technology in more detailed ways. The glossary at the end of the document defines many of the specialized terms. A directory of US geothermal industry firms who provide goods and services for clients around the world is available on request.

  10. Technology development risk assessment and mixed interests

    International Nuclear Information System (INIS)

    Borrelli, G.; Sartori, S.

    1992-05-01

    The main purpose of this work is to demonstrate by means of a critical analysis of the state-of-the-art in technological and environmental risk analysis and decision making, that risk and environmental management decisions involve heterogeneous groups of social actors, each representing conflicting interests. It is argued that risk analyses should therefore be based on social interaction and communication paradigma, as well as, on a new rational way of thinking concerning the optimum choice of suitable technological development strategies leading towards a publicly acceptable balance between national energy-economic strategic necessities and social and individual perception of risk

  11. Assessment of Ga2O3 technology

    Science.gov (United States)

    2016-09-15

    this article has given the emerging technology of GaN a valuable push in term of encouragement to stay with it while the painful technology development...Ga2O3 α-Ga2O3 β-Ga2O3 β-Ga2O3 β-Ga2O3 poly - Ga2O3 β-Ga2O3 Epi-layer Growth Method MBE (ozone) MBE (ozone) MBE (ozone) Mist-CVD MBE (ozone... pains to treat the wafer surface with BCl3 RIE to create charges at the interface. The gate contact was also barely a Schottky contact evidenced by

  12. The development of integrated safety assessment technology

    International Nuclear Information System (INIS)

    Yoo, Keon Joong; Park, Chang Kyu; Kim, Tae Un; Han, Sang Hoon; Yang, Joon Eon; Lim, Tae Jin; Han, Jae Joo; Je, Moo Seong; An, Kwang Il; Kim, Shi Dal; Jeong, Jong Tae; Jeong, Kwang Seop; Jin, Yeong Ho; Kim, Dong Ha; Kim, Kil Yoo; Cho, Yeong Kyoon; Jeong, Won Dae; Jang, Seung Cheol; Choi, Yeong; Park, Soo Yong; Seong, Tae Yong; Song, Yong Man; Kang, Dae Il; Park, Jin Hee; Jang, Seon Joo; Hwang, Mi Jeong; Choi, Seon Yeong

    1993-05-01

    For the purpose of developing the integrated PSA methodology and computer codes, Level-1 and Level-2 PSA methodology and tools were reviewed and improved. The Level-1 PSA computer code package KIRAP was improved and released by the name of KIRAP Release 2.0 Several Human reliability analysis and common cause failure analysis methods was reviewed and compared. For the development of Level-2 PSA computer code, several level-1 and Level-2 interface methods and containment event tree development methods were reviewed and compared. And the new technology such as artificial intelligence was reviewed if the technology can be applied to the development of PSA methodology.(Author)

  13. Innovative and Alternative Technology Assessment Manual

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  14. The United States Advanced Reactor Technologies Research and Development Program

    International Nuclear Information System (INIS)

    O’Connor, Thomas J.

    2014-01-01

    The following aspects are addressed: • Nuclear energy mission; • Reactor research development and deployment (RD&D) programs: - Light Water Reactor Sustainability Program; - Small Modular Reactor Licensing Technical Support; - Advanced Reactor Technologies (ART)

  15. Enrichment supply and technology outside the United States

    International Nuclear Information System (INIS)

    Levin, S.A.; Blumkin, S.

    1977-01-01

    This is a review of foreign uranium enrichment capacity and uranium isotope separation technology, based on news items and articles in the public literature. Tables are included presenting capacity plans, growth, sales, research and development, etc

  16. History of technology in the intensive care unit.

    Science.gov (United States)

    Puri, Nitin; Puri, Vinod; Dellinger, R P

    2009-01-01

    Critical care medicine is a young specialty and since its inception has been heavily reliant upon technology. Invasive monitoring has its humble beginnings in the continuous monitoring of heart rate and rhythm. From the development of right heart catheterization to the adaption of the echocardiogram for use in shock, intensivists have used technology to monitor hemodynamics. The care of the critically ill has been buoyed by investigators who sought to offer renal replacement therapy to unstable patients and worked to improve the monitoring of oxygen saturation. The evolution of mechanical ventilation for the critically ill embodies innumerable technological advances. More recently, critical care has insisted upon rigorous testing and cost-benefit analysis of technological advances.

  17. United States Superconducting MHD Magnet Technology Development Program

    International Nuclear Information System (INIS)

    Dawson, A.M.; Marston, P.G.; Thome, R.J.; Iwasa, Y.; Tarrh, J.M.

    1981-01-01

    A three-faceted program supported by the U.S. Dep of Energy is described. These facets include basic technology development, technology transfer and construction by industry of magnets for the national MHD program. The program includes the maintenance of a large component test facility; investigation of superconductor stability and structural behavior; measurements of materials' properties at low temperatures; structural design optimization; analytical code development; cryogenic systems and power supply design. The technology transfer program is designed to bring results of technology development and design and construction effort to the entire superconducting magnet community. The magnet procurement program is responsible for developing conceptual designs of magnets needed for the national MHD program, for issuing requests for quotation, selecting vendors and supervising design, construction, installation and test of these systems. 9 refs

  18. Quadrennial Technology Review 2015: Technology Assessments--Hydropower

    Energy Technology Data Exchange (ETDEWEB)

    Sam Baldwin, Gilbert Bindewald, Austin Brown, Charles Chen, Kerry Cheung, Corrie Clark, Joe Cresko,

    2015-10-07

    Hydropower has provided reliable and flexible base and peaking power generation in the United States for more than a century, contributing on average 10.5% of cumulative U.S. power sector net generation over the past six and one-half decades (1949–2013). It is the nation’s largest source of renewable electricity, with 79 GW of generating assets and 22 GW of pumped-storage assets in service, with hydropower providing half of all U.S. renewable power-sector generation (50% in 2014). In addition to this capacity, the U.S. Department of Energy (DOE) has identified greater than 80 GW of new hydropower resource potential: at least 5 GW from rehabilitation and expansion of existing generating assets, up to 12 GW of potential at existing dams without power facilities, and over 60 GW of potential low-impact new development (LIND) in undeveloped stream reaches. However, despite this growth potential, hydropower capacity and production growth have stalled in recent years, with existing assets even experiencing decreases in capacity and production from lack of sustaining investments in infrastructure and increasing constraints on water use.

  19. SELECTION OF KURAU FISHING TECHNOLOGY UNITS Eleutheronema tetradactylum WHICH COMPETITIVE AND SUSTAINABLE

    Directory of Open Access Journals (Sweden)

    Muhammad Natsir Kholis

    2018-01-01

    Full Text Available Environmentally friendly fishing technology unit is needed in sustainable fisheries management. The purpose of this study was to determine the fishing technology unit of kurau competitive and sustainable. Data collection was carried out from July to September 2016 in the Coastal Pambang of Bengkalis District of Riau Province, by using the survey method. The analytical data method used is scoring the biological, technical and socioeconomic aspects the fishing technology unit of kurau. Results of research show that combined analysis of biological, technical and socioeconomic aspects have the value of the VA fishing line function (2.48 is higher than the other three fishing gear. Thus, the fishing line is a selected fishing technology unit of kurau competitive and sustainable in the Coastal Pambang Bengkalis District. Keywords: competitive,coastal pambang, fishing technology, kurau fish,sustainable fishing

  20. Superconducting Technology Assessment (NSA, Office of Corporate Assessments)

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The government, and particularly NSA, has a continuing need for ever-increasing computational power. The Agency is concerned about projected limitations of...

  1. Use of ecological exposure units in ecological risk assessment

    International Nuclear Information System (INIS)

    Ferenbaugh, R.; Myers, O.; Gallegos, A.; Breshears, D.; Ebinger, M.

    1995-01-01

    The traditional approach to ecological risk assessment at hazardous waste sites that are being evaluated for cleanup under CERCLA or RCRA requirements is to focus on the immediate impacts at or adjacent to a site. While this may be acceptable in some situations, it is not ecologically defensible in situations where there are numerous contaminated sites in proximity to each other. In the latter case, transport from the sites, potential cumulative effects, and wide-ranging receptors must be considered. The concept of the Ecological Exposure Unit (EEU) has been proposed to address this situation. Ecological Exposure Units are defined on the basis of ecological considerations and each EEU may contain several to many contaminated sites. The initial steps involved in performing ecological risk assessments using the EEU approach include (1) selection of appropriate receptors and assessment endpoints, and (2) geographical definition of EEUs. At Los Alamos National Laboratory, receptors have been identified and EEUs have been defined for these receptors. GIS is being used as a tool to map EEUs. Receptors include representatives from threatened or endangered species, species reflecting status of ecological health, species with social or cultural relevance, and other species of concern. After definition of EEUs, cumulative impacts of all stressors at all sites within each EEU must be evaluated. The two major advantages to performing ecological risk assessments using this approach are that risk assessments are performed in a more scientifically defensible manner because they are performed on ecologically defined units and that resources are used optimally by minimizing redundant remedial activities

  2. Social assessment on fusion energy technology

    International Nuclear Information System (INIS)

    Nemoto, Kazuyasu

    1981-01-01

    In regard to the research and development for fusion energy technologies which are still in the stage of demonstrating scientific availability, it is necessary to accumulate the demonstrations of economic and environmental availability through the demonstration of technological availability. The purpose of this report is to examine how the society can utilize the new fusion energy technology. The technical characteristics of fusion energy system were analyzed in two aspects, namely the production techniques of thermal energy and electric energy. Also on the social characteristics in the fuel cycle stage of fusion reactors, the comparative analysis with existing fission reactors was carried out. Then, prediction and evaluation were made what change of social cycle fusion power generation causes on the social system formalized as a socio-ecological model. Moreover, the restricting factors to be the institutional obstacles to the application of fusion energy system to the society were analyzed from three levels of the decision making on energy policy. Since the convertor of fusion energy system is steam power generation system similar to existing system, the contents and properties of the social cycle change in the American society to which such new energy technology is applied are not much different even if the conversion will be made in future. (Kako, I.)

  3. Assessment of University- Industry Collaboration and Technology ...

    African Journals Online (AJOL)

    Despite the cultural differences between university and industry, the mutual benefits from collaboration between university and industry have long been recognized in the advanced countries. Recently, the issue of technology transfer and collaboration between universities and industries has been receiving attention in the ...

  4. Navy Electroplating Pollution Control Technology Assessment Manual.

    Science.gov (United States)

    1984-02-01

    Anodes ........... 136 J. Ultrafiltration and Microfiltration ..... 139 K. Ferrous Sulfate Reduction . . . . . . .... 143 L. Integrated Treatment... restorative ) categories. Some methods fall into both categories. The technologies have been in use for several decades, but applications have been extended...service department of chemical and equipment suppliers is the first step in deciding the most effective way of maintaining a bath or of restoring it to

  5. Swedish Technology Teachers' Views on Assessing Student Understandings of Technological Systems

    Science.gov (United States)

    Schooner, Patrick; Klasander, Claes; Hallström, Jonas

    2018-01-01

    Technology education is a new school subject in comparison with other subjects within the Swedish compulsory school system. Research in technology education shows that technology teachers lack experience of and support for assessment in comparison with the long-term experiences that other teachers use in their subjects. This becomes especially…

  6. Technology assessment and technology policy in Europe : New concepts, new goals, new infrastructures

    NARCIS (Netherlands)

    Smits, R.; Leyten, J.; Hertog, P. den

    1995-01-01

    Starting from the observation that the technological potentials are underutilized in economic and in social tems, this article raises the question of what role technology assessment (TA) can play in technology policy to address this problem. The causes of the problem of underutilization are analyzed

  7. Assessment of Delirium in Intensive Care Unit Patients: Educational Strategies.

    Science.gov (United States)

    Smith, Judith M; Van Aman, M Nancy; Schneiderhahn, Mary Elizabeth; Edelman, Robin; Ercole, Patrick M

    2017-05-01

    Delirium is an acute brain dysfunction associated with poor outcomes in intensive care unit (ICU) patients. Critical care nurses play an important role in the prevention, detection, and management of delirium, but they must be able to accurately assess for it. The Confusion Assessment Method for the Intensive Care Unit (CAM-ICU) instrument is a reliable and valid method to assess for delirium, but research reveals most nurses need practice to use it proficiently. A pretest-posttest design was used to evaluate the success of a multimodal educational strategy (i.e., online learning module coupled with standardized patient simulation experience) on critical care nurses' knowledge and confidence to assess and manage delirium using the CAM-ICU. Participants (N = 34) showed a significant increase (p education. No statistical change in knowledge of delirium existed following the education. A multimodal educational strategy, which included simulation, significantly added confidence in critical care nurses' performance using the CAM-ICU. J Contin Nurs Educ. 2017;48(5):239-244. Copyright 2017, SLACK Incorporated.

  8. Technology and public policy: The process of technology assessment in the federal government

    Science.gov (United States)

    Coates, V. T.

    1975-01-01

    A study was conducted to provide a descriptive and analytical review of the concept of technology assessment and the current status of its applications in the work of the federal executive agencies. The origin of the term technology assessment was examined along with a brief history of its discussion and development since 1966 and some of the factors influencing that development.

  9. 20 Years of Technology and Language Assessment in "Language Learning & Technology"

    Science.gov (United States)

    Chapelle, Carol A.; Voss, Erik

    2016-01-01

    This review article provides an analysis of the research from the last two decades on the theme of technology and second language assessment. Based on an examination of the assessment scholarship published in "Language Learning & Technology" since its launch in 1997, we analyzed the review articles, research articles, book reviews,…

  10. Assessment of foreign decommissioning technology with potential application to US decommissioning needs

    International Nuclear Information System (INIS)

    Allen, R.P.; Konzek, G.J.; Schneider, K.J.; Smith, R.I.

    1987-09-01

    This study was conducted by the Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE) to identify and technically assess foreign decommissioning technology developments that may represent significant improvements over decommissioning technology currently available or under development in the United States. Technology need areas for nuclear power reactor decommissioning operations were identified and prioritized using the results of past light water reactor (LWR) decommissioning studies to quantitatively evaluate the potential for reducing cost and decommissioning worker radiation dose for each major decommissioning activity. Based on these identified needs, current foreign decommissioning technologies of potential interest to the US were identified through personal contacts and the collection and review of an extensive body of decommissioning literature. These technologies were then assessed qualitatively to evaluate their uniqueness, potential for a significant reduction in decommissioning costs and/or worker radiation dose, development status, and other factors affecting their value and applicability to US needs

  11. Radioactive scrap metal decontamination technology assessment report

    International Nuclear Information System (INIS)

    Buckentin, J.M.; Damkroger, B.K.; Schlienger, M.E.

    1996-04-01

    Within the DOE complex there exists a tremendous quantity of radioactive scrap metal. As an example, it is estimated that within the gaseous diffusion plants there exists in excess of 700,000 tons of contaminated stainless steel. At present, valuable material is being disposed of when it could be converted into a high quality product. Liquid metal processing represents a true recycling opportunity for this material. By applying the primary production processes towards the material's decontamination and re-use, the value of the strategic resource is maintained while drastically reducing the volume of material in need of burial. Potential processes for the liquid metal decontamination of radioactively contaminated metal are discussed and contrasted. Opportunities and technology development issues are identified and discussed. The processes compared are: surface decontamination; size reduction, packaging and burial; melting technologies; electric arc melting; plasma arc centrifugal treatment; air induction melting; vacuum induction melting; and vacuum induction melting and electroslag remelting

  12. IMPROVING HOSPITAL LOGISTICS BY RETHINKING TECHNOLOGY ASSESSMENT

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Jørgensen, Pelle Morten Thomas

    2011-01-01

    In order to cope with the future challenges of the health care sector, there is an urging need for improving efficiency at hospitals. The study presents a framework enabling health care managers of improving the in-house logistics. The distinctiveness of the framework is the way in which it relates...... technology, logistics, structure and procedures to efficiency. Changing one factor e.g. technology, initiates an iterative loop focusing on change in the related factors in order to obtain the optimal efficiency. The search for an optimal efficient solution is the driving force of the framework...... at a Danish hospital. The framework is tested on the blood sample logistics between the emergency department and laboratory with the goal of enhancing the efficiency of the emergency department....

  13. Technology assessments in transportation: survey of recent literature

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, S.J.

    1980-03-01

    A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

  14. Adoption of precision agriculture technology in the Southeastern United States

    Science.gov (United States)

    Agricultural production in the Southeast is diverse and differs from other regions of the United States (U.S.). Crops grown in the Southeast are specific to the region, such as cotton and peanuts. Corn farmers supply most of the grain produced to the poultry industry to support over 15 billion dolla...

  15. GIS Technology: Resource and Habitability Assessment Tool

    Data.gov (United States)

    National Aeronautics and Space Administration — We are applying Geographic Information Systems (GIS) to new orbital data sets for lunar resource assessment and the identification of past habitable environments on...

  16. Scientific method, adversarial system, and technology assessment

    Science.gov (United States)

    Mayo, L. H.

    1975-01-01

    A basic framework is provided for the consideration of the purposes and techniques of scientific method and adversarial systems. Similarities and differences in these two techniques of inquiry are considered with reference to their relevance in the performance of assessments.

  17. United-States: the forefront of new nuclear technologies

    International Nuclear Information System (INIS)

    Le Ngoc, B.

    2015-01-01

    In the U.S. there are about 50 enterprises developing new concepts in the nuclear sector specially in power production (smaller reactors) and waste management. These enterprises require important technological and financial means to engage experts and build prototypes so U.S. authorities have developed a platform named GAIN (Gateway for Accelerated Innovation on Nuclear) for providing technological support and financing. The American Department of Energy (DoE) will keep on financing research in the nuclear sector. The American 2016 finance law provides a 9% increase for financing nuclear programmes. Research on Small Modular Reactors (SMR) with a power output ranging from 50 to 300 MW will be favored.

  18. Telecommunications technology and rural education in the United States

    Science.gov (United States)

    Perrine, J. R.

    1975-01-01

    The rural sector of the US is examined from the point of view of whether telecommunications technology can augment the development of rural education. Migratory farm workers and American Indians were the target groups which were examined as examples of groups with special needs in rural areas. The general rural population and the target groups were examined to identify problems and to ascertain specific educational needs. Educational projects utilizing telecommunications technology in target group settings were discussed. Large scale regional ATS-6 satellite-based experimental educational telecommunications projects were described. Costs and organizational factors were also examined for large scale rural telecommunications projects.

  19. Assessing RN-to-RN peer review on clinical units.

    Science.gov (United States)

    Pfeiffer, Judith A; Wickline, Mary A; Deetz, Jill; Berry, Elise S

    2012-04-01

    The primary purpose of this study was to measure informal registered nurse (RN)-to-RN peer review (defined as collegial communication about the quality of nursing care) at the work-unit level. Survey design with cluster sampling of 28 hospital or ambulatory care units (n = 541 respondents). Results were compared with existing patient safety and satisfaction data. A chi-squared test was used to compare responses against nurse characteristics. Nurses agreed that RN-to-RN peer review takes place on their units, but no correlation with patient safety and satisfaction data was found. Misunderstandings about the meaning of peer review were evident. Open-ended comments revealed barriers to peer review: fear of retribution, language barriers and lack of professionalism. Nurses need clarification of peer review. Issues with common language in a professional environment need to be addressed and nurses can learn collaboration from each other's cultures. Managers should support RN-to-RN peer review on clinical units. Methods used here may be useful to assess current departmental nurse peer review. © 2011 Blackwell Publishing Ltd.

  20. Technology and Current Reading/Literacy Assessment Strategies

    Science.gov (United States)

    Balajthy, Ernest

    2007-01-01

    Computer-based technologies offer promise as a means to assess students and provide teachers with better understandings of their students' achievement. This article describes recent developments in computer-based and web-based reading and literacy assessment, focusing on assessment administration, information management, and report creation. In…

  1. Aggregation of carbon dioxide sequestration storage assessment units

    Science.gov (United States)

    Blondes, Madalyn S.; Schuenemeyer, John H.; Olea, Ricardo A.; Drew, Lawrence J.

    2013-01-01

    The U.S. Geological Survey is currently conducting a national assessment of carbon dioxide (CO2) storage resources, mandated by the Energy Independence and Security Act of 2007. Pre-emission capture and storage of CO2 in subsurface saline formations is one potential method to reduce greenhouse gas emissions and the negative impact of global climate change. Like many large-scale resource assessments, the area under investigation is split into smaller, more manageable storage assessment units (SAUs), which must be aggregated with correctly propagated uncertainty to the basin, regional, and national scales. The aggregation methodology requires two types of data: marginal probability distributions of storage resource for each SAU, and a correlation matrix obtained by expert elicitation describing interdependencies between pairs of SAUs. Dependencies arise because geologic analogs, assessment methods, and assessors often overlap. The correlation matrix is used to induce rank correlation, using a Cholesky decomposition, among the empirical marginal distributions representing individually assessed SAUs. This manuscript presents a probabilistic aggregation method tailored to the correlations and dependencies inherent to a CO2 storage assessment. Aggregation results must be presented at the basin, regional, and national scales. A single stage approach, in which one large correlation matrix is defined and subsets are used for different scales, is compared to a multiple stage approach, in which new correlation matrices are created to aggregate intermediate results. Although the single-stage approach requires determination of significantly more correlation coefficients, it captures geologic dependencies among similar units in different basins and it is less sensitive to fluctuations in low correlation coefficients than the multiple stage approach. Thus, subsets of one single-stage correlation matrix are used to aggregate to basin, regional, and national scales.

  2. Enabling Fast Charging: A Technology Gap Assessment

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-10-31

    Decreasing energy consumption across the U.S. transportation sector, especially in commercial light-duty vehicles, is essential for the United States to gain energy independence. Recently, powertrain electrification with plug-in electric vehicles (PEVs) have gained traction as an alternative due to their inherent efficiency advantages compared to the traditional internal combustion engine vehicle (ICEV). Even though there are many different classes of PEVs, the intent of this study is to focus on non-hybrid powertrains, or battery electric vehicles (BEVs).

  3. History of the international societies in health technology assessment: International Society for Technology Assessment in Health Care and Health Technology Assessment International.

    Science.gov (United States)

    Banta, David; Jonsson, Egon; Childs, Paul

    2009-07-01

    The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.

  4. Adoption of Rice Technologies Introduced by the United States ...

    African Journals Online (AJOL)

    The study determined the levels of adoption of improved rice technologies introduced by USAID MARKETS project phase one in Anambra and Ebonyi States, Nigeria. The population of the study included all project participant rice farmers of USAID MARKETS project in both Anambra and Ebonyi States. A total sample of 80 ...

  5. Recent technology for nuclear steam turbine-generator units

    International Nuclear Information System (INIS)

    Moriya, Shin-ichi; Kuwashima, Hidesumi; Ueno, Takeshi; Ooi, Masao

    1988-01-01

    As the next nuclear power plants subsequent to the present 1,100 MWe plants, the technical development of ABWRs was completed, and the plan for constructing the actual plants is advanced. As for the steam turbine and generator facilities of 1,350 MWe output applied to these plants, the TC6F-52 type steam turbines using 52 in long blades, moisture separation heaters, butterfly type intermediate valves, feed heater drain pumping-up system and other new technologies for increasing the capacity and improving the thermal efficiency were adopted. In this paper, the outline of the main technologies of those and the state of examination when those are applied to the actual plants are described. As to the technical fields of the steam turbine system for ABWRs, the improvement of the total technologies of the plants was promoted, aiming at the good economical efficiency, reliability and thermal efficiency of the whole facilities, not only the main turbines. The basic specification of the steam turbine facilities for 50 Hz ABWR plants and the main new technologies applied to the turbines are shown. The development of 52 in long last stage blades, the development of the analysis program for the coupled vibration of the large rotor system, the development of moisture separation heaters, the turbine control system, condensate and feed water system, and the generators are described. (Kako, I.)

  6. Technologies Assessing Limb Bradykinesia in Parkinson’s Disease

    Science.gov (United States)

    Hasan, Hasan; Athauda, Dilan S.; Foltynie, Thomas; Noyce, Alastair J.

    2017-01-01

    Background: The MDS-UPDRS (Movement Disorders Society – Unified Parkinson’s Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. Objective: To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. Methods: A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. Results: 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Conclusion: Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development. PMID:28222539

  7. Constructive Technology Assessment for HIT development

    DEFF Research Database (Denmark)

    Høstgaard, Anna Marie Balling; Bertelsen, Pernille; Petersen, Lone Stub

    2013-01-01

    Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success facto...... during all the phases in the process. Thereby anumber of problems were prevented to occur later on.Thus, the CTA method and its framework are useful for evaluators and project-management in order to facilitate and support successful HIT development....

  8. Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

    Science.gov (United States)

    Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

    2015-04-01

    Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

  9. New technology in dietary assessment: a review of digital methods in improving food record accuracy.

    Science.gov (United States)

    Stumbo, Phyllis J

    2013-02-01

    Methods for conducting dietary assessment in the United States date back to the early twentieth century. Methods of assessment encompassed dietary records, written and spoken dietary recalls, FFQ using pencil and paper and more recently computer and internet applications. Emerging innovations involve camera and mobile telephone technology to capture food and meal images. This paper describes six projects sponsored by the United States National Institutes of Health that use digital methods to improve food records and two mobile phone applications using crowdsourcing. The techniques under development show promise for improving accuracy of food records.

  10. Biopower Technical Assessment: State of the Industry and the Technology

    Energy Technology Data Exchange (ETDEWEB)

    Bain, R. L.; Amos, W. P.; Downing, M.; Perlack, R. L.

    2003-01-01

    This report provides an assessment of the state of the biopower industry and the technology for producing electricity and heat from biomass. Biopower (biomass-to-electricity generation), a proven electricity generating option in the United States and with about 11 GW of installed capacity, is the single largest source of non-hydro renewable electricity. This 11 GW of capacity encompasses about 7.5 GW of forest product industry and agricultural industry residues, about 3.0 GW of municipal solid waste-based generating capacity and 0.5 GW of other capacity such as landfill gas based production. The electricity production from biomass is being used and is expected to continue to be used as base load power in the existing electrical distribution system. An overview of sector barriers to biopower technology development is examined in Chapter 2. The discussion begins with an analysis of technology barriers that must be overcome to achieve successful technology pathways leading to the commercialization of biomass conversion and feedstock technologies. Next, an examination of institutional barriers is presented which encompasses the underlying policies, regulations, market development, and education needed to ensure the success of biopower. Chapter 3 summarizes biomass feedstock resources, characteristics, availability, delivered prices, requirements for processing, and the impediments and barriers to procurement. A discussion of lessons learned includes information on the California biomass energy industry, lessons from commercial biopower plants, lessons from selected DOE demonstration projects, and a short summary of the issues considered most critical for commercial success is presented in Chapter 4. A series of case studies, Chapter 5, have been performed on the three conversion routes for Combined Heat and Power (CHP) applications of biomass--direct combustion, gasification, and cofiring. The studies are based on technology characterizations developed by NREL and EPRI

  11. New Modes of Constructive Technology Assessment for Developing Countries

    DEFF Research Database (Denmark)

    Christensen, David; Remmen, Arne

    of transformation or co-creation in a movement from one context to another, i.e. from the North to South. The question here is how to affect a proactive intake of relevant knowledge in decision-making in a technological innovation process so as to increase the likelihood of developing sustainable solutions. A co...... into actor strategies and decision-making processes. There is a variant of ‘constructive’ technology assessment that stands out as useful in multi-actor partnership settings. Placing emphasis on interactive processes, constructive technology assessment embraces active negotiation among involved parties...... in influencing technological change. In developing countries, technology assessment has received relatively little attention, but recent developments have expressed a ‘call-to-arms’ to tailor flexible approaches by ensuring the involvement of diverse stakeholders and citizens and continual learning among...

  12. Guidance on the Technology Performance Level (TPL) Assessment Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States); Roberts, Jesse D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Babarit, Aurelien [Ecole Centrale de Nantes (France). Lab. of Research in Hydrodynamics, Energetics and Atmospheric Environment (LHEEA); Costello, Ronan [Wave Venture, Penstraze (United Kingdom); Bull, Diana L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neilson, Kim [Ramboll, Copenhagen (Denmark); Bittencourt, Claudio [DNV GL, London (United Kingdom); Kennedy, Ben [Wave Venture, Penstraze (United Kingdom); Malins, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dykes, Katherine [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    This document presents the revised Technology Performance Level (TPL) assessment methodology. There are three parts to this revised methodology 1) the Stakeholder Needs and Assessment Guidance (this document), 2) the Technical Submission form, 3) the TPL scoring spreadsheet. The TPL assessment is designed to give a technology neutral or agnostic assessment of any wave energy converter technology. The focus of the TPL is on the performance of the technology in meeting the customer’s needs. The original TPL is described in [1, 2] and those references also detail the critical differences in the nature of the TPL when compared to the more widely used technology readiness level (TRL). (Wave energy TRL is described in [3]). The revised TPL is particularly intended to be useful to investors and also to assist technology developers to conduct comprehensive assessments in a way that is meaningful and attractive to investors. The revised TPL assessment methodology has been derived through a structured Systems Engineering approach. This was a formal process which involved analyzing customer and stakeholder needs through the discipline of Systems Engineering. The results of the process confirmed the high level of completeness of the original methodology presented in [1] (as used in the Wave Energy Prize judging) and now add a significantly increased level of detail in the assessment and an improved more investment focused structure. The revised TPL also incorporates the feedback of the Wave Energy Prize judges.

  13. Assessment of Clinical Practices for Crushing Medication in Geriatric Units.

    Science.gov (United States)

    Fodil, M; Nghiem, D; Colas, M; Bourry, S; Poisson-Salomon, A-S; Rezigue, H; Trivalle, C

    2017-01-01

    To assess the modification of the form of medication and evaluate staff observance of good clinical practices. One-day assessment of clinical practices. 17 geriatrics units in the 3 Teaching Hospitals of Paris-Sud (APHP), France. Elderly in-patients with difficulties swallowing capsules and tablets. Assessment of target-patient prescriptions and direct observation of nurses' medical rounds. 155/526 in-patients (29.5%) were unable to swallow tablets or capsules: 98 (40.3%) in long-term care, 46 patients (23.8%) in the rehabilitation unit and 11 (12.2%) in the acute care unit (p = .005). In thirty-nine (27.3%) of the 143 prescriptions studied all tablets were safe to crush and all capsules were safe to open. In 104 cases, at least one medication could not be safely modified, including 26 cases (18.2%) in which none of the prescribed drugs were safe to crush or open. In 48.2% of the 110 medications that were crushed, crushing was forbidden, and presented a potential threat in 12.7% of cases or a reduced efficacy in 8.2% of cases. Crushing methods were rarely appropriate: no specific protective equipment was used (81.8%), crushing equipment was shared between patients without cleaning (95.1%), medications were spilled or lost (69.9%). The method of administration was appropriate (water, jellified water) in 25% of the cases, questionable (soup, coffee, compote, juice, cream) in 55% of the cases and unacceptable (laxative) in 21% of the cases. Management of drug prescriptions in patients with swallowing difficulties is not optimal, and may even have iatrogenic effects. In this study, 12.7% of the modifications of the drug form could have been harmful. Doctors, pharmacists and nurses need to reevaluate their practices.

  14. Emerging technologies for assessing HER2 amplification

    NARCIS (Netherlands)

    Penault-Llorca, Frédérique; Bilous, Michael; Dowsett, Mitch; Hanna, Wedad; Osamura, Robert Yoshiyuki; Rüschoff, Josef; van de Vijver, Marc

    2009-01-01

    Patients with human epidermal growth factor receptor-2 (HER2)+ breast cancer are eligible for trastuzumab treatment; therefore, accurate assessment of HER2 status is essential. Until recently, only 2 methods were validated for determining the HER2 status of breast tumors in the routine diagnostic

  15. Apperception and assessment of technological risks

    International Nuclear Information System (INIS)

    Hoyos, C.; Hauke, G.

    1986-01-01

    Risk is defined to be the possibility to induce damage or loss. Any person confronted with risk in his activities has to assess the risk in every case. The author explains a number of actions and events that have been worked out to train people in better management of risk, especially in the working environment. (DG) [de

  16. Gender and risk assessment in contraceptive technologies

    NARCIS (Netherlands)

    van Kammen, Jessika; Oudshoorn, Nelly E.J.

    This paper concerns a comparison of risk assessment practices of contraceptives for women and men. Our analysis shows how the evaluation of health risks of contraceptives does not simply reflect the specific effects of chemical compounds in the human body. Rather, we show how side-effects were rated

  17. Wearable technology for spine movement assessment: A systematic review

    OpenAIRE

    Papi, Enrica; Koh, Woon Senn; McGregor, Alison H.

    2017-01-01

    Continuous monitoring of spine movement function could enhance our understanding of low back pain development. Wearable technologies have gained popularity as promising alternative to laboratory systems in allowing ambulatory movement analysis. This paper aims to review the state of art of current use of wearable technology to assess spine kinematics and kinetics. Four electronic databases and reference lists of relevant articles were searched to find studies employing wearable technologies t...

  18. A needs assessment for mobile technology use in medical education

    OpenAIRE

    Shahrzad Vafa; Diane E. Chico

    2013-01-01

    Objectives: This study investigated how medical students perceived mobile technology as a component of their learning experience and identified barriers to the use of mobile technology in education. Methods: An anonymous survey developed by EDUCAUSE was distributed to 1000 first year medical students (M1s) at two separate medical schools during three consecutive academic years, 2010 to 2013. The 25-item questionnaire assessed student use of mobile devices, student interest in mobile technolog...

  19. An Assessment of Petroleum Technology Development Fund (Ptdf ...

    African Journals Online (AJOL)

    An Assessment of Petroleum Technology Development Fund (Ptdf) ... and other related literature were utilized to elicit information for the research. ... industry and that some of those trained lack the technical know-how to manage the refineries.

  20. The potential impact of computer-aided assessment technology in ...

    African Journals Online (AJOL)

    The potential impact of computer-aided assessment technology in higher education. ... Further more 'Increased number of students in Higher Education and the ... benefits, limitations, impacts on student learning and strategies for developing ...

  1. Scenario drafting to anticipate future developments in technology assessment

    NARCIS (Netherlands)

    Retel, Valesca; Retel, V.P.; Joore, M.A.; Rutgers, E.J.; van Harten, Willem H.

    2012-01-01

    Background Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and

  2. Technology needs assessment (TNA) resource document for South Africa

    CSIR Research Space (South Africa)

    Taviv, R

    2007-08-01

    Full Text Available TNA(Technology needs assessment) is a requirement of Article 4.5 of the UNFCCC ‘Technology Transfer’ is a broad set of processes covering the flows of know-how, experience and equipment for mitigating or adapting to climate change amongst different...

  3. Institutionalizing Emerging Technology Assessment Process into National Incident Response

    Science.gov (United States)

    2013-10-01

    mechanical methods, devices, and products, including oil sensors, booms, skimmers, decontamination , and waste minimization technologies...handling). • Alternative Oil Spill Response Technologies (in situ burning , dispersants, etc.). • Oil Spill Damage Assessment and Restoration. The TETs...deaths of eleven crewmembers and a subsequent uncontrolled oil spill that tested the government’s ability to respond to a spill of this magnitude as

  4. Review of early assessment models of innovative medical technologies

    DEFF Research Database (Denmark)

    Fasterholdt, Iben; Krahn, Murray D; Kidholm, Kristian

    2017-01-01

    INTRODUCTION: Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models...

  5. The provision of assistive technology products and services for people with dementia in the United Kingdom.

    Science.gov (United States)

    Gibson, Grant; Newton, Lisa; Pritchard, Gary; Finch, Tracy; Brittain, Katie; Robinson, Louise

    2016-07-01

    In this review we explore the provision of assistive technology products and services currently available for people with dementia within the United Kingdom. A scoping review of assistive technology products and services currently available highlighted 171 products or product types and 331 services. In addition, we assimilated data on the amount and quality of information provided by assistive technology services alongside assistive technology costs. We identify a range of products available across three areas: assistive technology used 'by', 'with' and 'on' people with dementia. Assistive technology provision is dominated by 'telecare' provided by local authorities, with services being subject to major variations in pricing and information provision; few currently used available resources for assistive technology in dementia. We argue that greater attention should be paid to information provision about assistive technology services across an increasingly mixed economy of dementia care providers, including primary care, local authorities, private companies and local/national assistive technology resources. © The Author(s) 2014.

  6. Technical and Technological Skills Assessment in Laparoscopic Surgery

    Science.gov (United States)

    Chang, Avril; Vincent, Charles

    2006-01-01

    Objectives: Surgical appraisal and revalidation are key components of good surgical practice and training. Assessing technical skills in a structured manner is still not widely used. Laparoscopic surgery also requires the surgeon to be competent in technological aspects of the operation. Methods: Checklists for generic, specific technical, and technological skills for laparoscopic cholecystectomies were constructed. Two surgeons with >12 years postgraduate surgical experience assessed each operation blindly and independently on DVD. The technological skills were assessed in the operating room. Results: One hundred operations were analyzed. Eight trainees and 10 consultant surgeons were recruited. No adverse events occurred due to technical or technological skills. Mean interrater reliability was kappa=0.88, P=technical and technological skills between trainee and consultant surgeons were significant, Mann-Whitney P=technical and technological skills can be measured to assess performance of laparoscopic surgeons. This technical and technological assessment tool for laparoscopic surgery seems to have face, content, concurrent, and construct validities and could be modified and applied to any laparoscopic operation. The tool has the possibility of being used in surgical training and appraisal. We aim to modify and apply this tool to advanced laparoscopic operations. PMID:17212881

  7. ASSESSING INDIVIDUAL PERFORMANCE ON INFORMATION TECHNOLOGY ADOPTION: A NEW MODEL

    OpenAIRE

    Diah Hari Suryaningrum

    2012-01-01

    This paper aims to propose a new model in assessing individual performance on information technology adoption. The new model to assess individual performance was derived from two different theories: decomposed theory of planned behavior and task-technology fit theory. Although many researchers have tried to expand these theories, some of their efforts might lack of theoretical assumptions. To overcome this problem and enhance the coherence of the integration, I used a theory from social scien...

  8. The Contribution of Health Technology Assessment, Health Needs Assessment, and Health Impact Assessment to the Assessment and Translation of Technologies in the Field of Public Health Genomics

    DEFF Research Database (Denmark)

    Rosenkotter, N.; Vondeling, H.; Blancquaert, I.

    2011-01-01

    contribute to the systematic translation and assessment of genomic health applications by focussing at population level and on public health policy making. It is shown to what extent HTA, HNA and HIA contribute to translational research by using the continuum of translational research (T1-T4) in genomic...... into the impact on public health and health care practice of those technologies that are actually introduced. This paper aims to give an overview of the major assessment instruments in public health [ health technology assessment (HTA), health needs assessment (HNA) and health impact assessment (HIA)] which could...... medicine as an analytic framework. The selected assessment methodologies predominantly cover 2 to 4 phases within the T1-T4 system. HTA delivers the most complete set of methodologies when assessing health applications. HNA can be used to prioritize areas where genomic health applications are needed...

  9. Contact radiotherapy. Report of technological assessment

    International Nuclear Information System (INIS)

    Ortholan, Cecile; Melin, Nicole; Lee-Robin, Sun Hae; David, Denis Jean; Pages, Frederique; Devaud, Christine; Noel, Georges; Biga, Julie; Moty-Monnereau, Celine; Canet, Philippe; Lascols, Sylvie; Lamas, Muriel; Ramdine, Jessica; Tuil, Louise

    2008-10-01

    This report aims at assessing safety, indications, the role in therapeutic strategy, and efficiency of contact radiotherapy. It also aims at answering questions like: is the contact radiotherapy technique validated? What are the indications for contact radiotherapy? What about the efficiency and safety of contact radiotherapy? After a presentation of preliminary notions on radiotherapy (radiation types, dose, and irradiation techniques), the report presents this specific technique of contact radiotherapy: definition, devices, use recommendations, issues of radiation protection, modalities of performance of a contact radiotherapy session, and concerned pathologies. Then, based on a literature survey, this report addresses the various concerned tumours (skin, rectum, brain, breast), indicates some general information about these tumours (epidemiological data, anatomy and classification, therapeutic options, radiotherapy), and proposes an assessment of the efficiency and safety of contact radiotherapy

  10. Problems of method of technology assessment. A methodological analysis; Methodenprobleme des Technology Assessment; Eine methodologische Analyse

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, V

    1993-03-01

    The study undertakes to analyse the theoretical and methodological structure of Technology Assessment (TA). It is based on a survey of TA studies which provided an important condition for theoreticall sound statements on methodological aspects of TA. It was established that the main basic theoretical problems of TA are in the field of dealing with complexity. This is also apparent in the constitution of problems, the most elementary and central approach of TA. Scientifically founded constitution of problems and the corresponding construction of models call for interdisciplinary scientific work. Interdisciplinarity in the TA research process is achieved at the level of virtual networks, these networks being composed of individuals suited to teamwork. The emerging network structures have an objective-organizational and an ideational basis. The objective-organizational basis is mainly the result of team composition and the external affiliations of the team members. The ideational basis of the virtual network is represented by the team members` mode of thinking, which is individually located at a multidisciplinary level. The theoretical `skeleton` of the TA knowledge system, which is represented by process knowledge based linkage structures, can be generated and also processed in connection with the knowledge on types of problems, areas of analysis and procedures to deal with complexity. Within this process, disciplinary knowledge is a necessary but not a sufficient condition. Metatheoretical and metadisciplinary knowledge and the correspondingly processes complexity of models are the basis for the necessary methodological awareness, that allows TA to become designable as a research procedure. (orig./HP) [Deutsch] Die Studie stellt sich die Aufgabe, die theoretische und methodische Struktur des Technology Assessment (TA) zu analysieren. Sie fusst auf Erhebungen, die bei Technology-Assessment-Studien vorgenommen wurden und die wesentliche Voraussetzungen fuer

  11. Making Choices in the Virtual World: The New Model at United Technologies Information Network.

    Science.gov (United States)

    Gulliford, Bradley

    1998-01-01

    Describes changes in services of the United Technologies Corporation Information Network from a traditional library system to a virtual system of World Wide Web sites, a document-delivery unit, telephone and e-mail reference, and desktop technical support to provide remote access. Staff time, security, and licensing issues are addressed.…

  12. Reimbursement of pharmaceuticals: reference pricing versus health technology assessment.

    Science.gov (United States)

    Drummond, Michael; Jönsson, Bengt; Rutten, Frans; Stargardt, Tom

    2011-06-01

    Reference pricing and health technology assessment are policies commonly applied in order to obtain more value for money from pharmaceuticals. This study focussed on decisions about the initial price and reimbursement status of innovative drugs and discussed the consequences for market access and cost. Four countries were studied: Germany, The Netherlands, Sweden and the United Kingdom. These countries have operated one, or both, of the two policies at certain points in time, sometimes in parallel. Drugs in four groups were considered: cholesterol-lowering agents, insulin analogues, biologic drugs for rheumatoid arthritis and "atypical" drugs for schizophrenia. Compared with HTA, reference pricing is a relatively blunt instrument for obtaining value for money from pharmaceuticals. Thus, its role in making reimbursement decisions should be limited to drugs which are therapeutically equivalent. HTA is a superior strategy for obtaining value for money because it addresses not only price but also the appropriate indications for the use of the drug and the relation between additional value and additional costs. However, given the relatively higher costs of conducting HTAs, the most efficient approach might be a combination of both policies.

  13. Mentoring a health technology assessment initiative in Kazakhstan.

    Science.gov (United States)

    Muratov, Sergei; Hailey, David; Foerster, Vicki; Brady, Bruce; Juzwishin, Don; la Fleur, Philip; McGowan, Jessie

    2014-04-01

    The aim of this study was to assist in the development of a health technology assessment (HTA) program for the Ministry of Health (MOH) of the Republic of Kazakhstan Mentoring of an initial HTA program in Kazakhstan was provided by the Canadian Society for International Health (CSIH) by means of a partnership with the Kazakhstan MOH. HTA materials, courses, and one-on-one support for the preparation of a series of initial HTA reports by MOH HTA staff were provided by a seven-member CSIH team over a 2.5-year project. Guidance documents on HTA and institutional strengthening were prepared in response to an extensive set of deliverables developed by the MOH and the World Bank. Introductory and train-the-trainer workshops in HTA and economic evaluation were provided for MOH staff members, experts from Kazakhstan research institutes and physicians. Five short HTA reports were successfully developed by staff in the Ministry's HTA Unit with assistance from the CSIH team. Challenges that may be relevant to other emerging HTA programs included lack of familiarity with some essential underlying concepts, organization culture, and limited time for MOH staff to do HTA work. The project helped to define the need for HTA and mentored MOH staff in taking the first steps to establish a program to support health policy decision making in Kazakhstan. This experience offers practical lessons for other emerging HTA programs, although these should be tailored to the specific context.

  14. Acoustic assessment of speech privacy curtains in two nursing units.

    Science.gov (United States)

    Pope, Diana S; Miller-Klein, Erik T

    2016-01-01

    Hospitals have complex soundscapes that create challenges to patient care. Extraneous noise and high reverberation rates impair speech intelligibility, which leads to raised voices. In an unintended spiral, the increasing noise may result in diminished speech privacy, as people speak loudly to be heard over the din. The products available to improve hospital soundscapes include construction materials that absorb sound (acoustic ceiling tiles, carpet, wall insulation) and reduce reverberation rates. Enhanced privacy curtains are now available and offer potential for a relatively simple way to improve speech privacy and speech intelligibility by absorbing sound at the hospital patient's bedside. Acoustic assessments were performed over 2 days on two nursing units with a similar design in the same hospital. One unit was built with the 1970s' standard hospital construction and the other was newly refurbished (2013) with sound-absorbing features. In addition, we determined the effect of an enhanced privacy curtain versus standard privacy curtains using acoustic measures of speech privacy and speech intelligibility indexes. Privacy curtains provided auditory protection for the patients. In general, that protection was increased by the use of enhanced privacy curtains. On an average, the enhanced curtain improved sound absorption from 20% to 30%; however, there was considerable variability, depending on the configuration of the rooms tested. Enhanced privacy curtains provide measureable improvement to the acoustics of patient rooms but cannot overcome larger acoustic design issues. To shorten reverberation time, additional absorption, and compact and more fragmented nursing unit floor plate shapes should be considered.

  15. Acoustic assessment of speech privacy curtains in two nursing units

    Directory of Open Access Journals (Sweden)

    Diana S Pope

    2016-01-01

    Full Text Available Hospitals have complex soundscapes that create challenges to patient care. Extraneous noise and high reverberation rates impair speech intelligibility, which leads to raised voices. In an unintended spiral, the increasing noise may result in diminished speech privacy, as people speak loudly to be heard over the din. The products available to improve hospital soundscapes include construction materials that absorb sound (acoustic ceiling tiles, carpet, wall insulation and reduce reverberation rates. Enhanced privacy curtains are now available and offer potential for a relatively simple way to improve speech privacy and speech intelligibility by absorbing sound at the hospital patient′s bedside. Acoustic assessments were performed over 2 days on two nursing units with a similar design in the same hospital. One unit was built with the 1970s′ standard hospital construction and the other was newly refurbished (2013 with sound-absorbing features. In addition, we determined the effect of an enhanced privacy curtain versus standard privacy curtains using acoustic measures of speech privacy and speech intelligibility indexes. Privacy curtains provided auditory protection for the patients. In general, that protection was increased by the use of enhanced privacy curtains. On an average, the enhanced curtain improved sound absorption from 20% to 30%; however, there was considerable variability, depending on the configuration of the rooms tested. Enhanced privacy curtains provide measureable improvement to the acoustics of patient rooms but cannot overcome larger acoustic design issues. To shorten reverberation time, additional absorption, and compact and more fragmented nursing unit floor plate shapes should be considered.

  16. Acoustic assessment of speech privacy curtains in two nursing units

    Science.gov (United States)

    Pope, Diana S.; Miller-Klein, Erik T.

    2016-01-01

    Hospitals have complex soundscapes that create challenges to patient care. Extraneous noise and high reverberation rates impair speech intelligibility, which leads to raised voices. In an unintended spiral, the increasing noise may result in diminished speech privacy, as people speak loudly to be heard over the din. The products available to improve hospital soundscapes include construction materials that absorb sound (acoustic ceiling tiles, carpet, wall insulation) and reduce reverberation rates. Enhanced privacy curtains are now available and offer potential for a relatively simple way to improve speech privacy and speech intelligibility by absorbing sound at the hospital patient's bedside. Acoustic assessments were performed over 2 days on two nursing units with a similar design in the same hospital. One unit was built with the 1970s’ standard hospital construction and the other was newly refurbished (2013) with sound-absorbing features. In addition, we determined the effect of an enhanced privacy curtain versus standard privacy curtains using acoustic measures of speech privacy and speech intelligibility indexes. Privacy curtains provided auditory protection for the patients. In general, that protection was increased by the use of enhanced privacy curtains. On an average, the enhanced curtain improved sound absorption from 20% to 30%; however, there was considerable variability, depending on the configuration of the rooms tested. Enhanced privacy curtains provide measureable improvement to the acoustics of patient rooms but cannot overcome larger acoustic design issues. To shorten reverberation time, additional absorption, and compact and more fragmented nursing unit floor plate shapes should be considered. PMID:26780959

  17. Technology assessment for Spaceship Two, space tourism, and private spaceflight

    Science.gov (United States)

    Hancock, Randy

    A seven-step technology assessment was conducted to address questions regarding the significance and likely consequences associated with the introduction of Spaceship Two, space tourism, and private spaceflight. Impacts were assessed across four categories: the Role and Functions of Government, Private Industry Factors, Cultural and Societal Impacts, and the Time Frame in which these impacts were anticipated to occur. The technology assessment findings were compared to the results of expert interviews that addressed the sane four categories. The researcher noted that, while there was overwhelming agreement between the technology assessment's primary impacts and the expert interview responses, there were several differences. The technology assessment and interviewees agreed that the federal government would likely be both a regulator and user of private spaceflight. Both agreed that business partnerships would be key in pursuing private spaceflight. There was also consensus that, as market forces come to bear, ticket prices would drop and a larger market and broader passenger demographic would emerge. The technology assessment and experts agreed that an accident, especially one early in the industry's evolution, could be disastrous. Both agreed that private spaceflight can serve as a inspiration to students and be a positive influence in society, and both agreed that the start of passenger flights should take place in the 2010 - 2012 timeframe. Due to the potentially disastrous consequences of an accident, there was agreement between the technology assessment and experts on the value of flight and ground crew training, driven by insurance carriers and federal mandate. Most differences between the technology assessment's findings and the expert interview responses were due to omission, rather than direct disagreement. However, this was not the case in every instance. The most significant difference between the technology assessment and the experts involved the

  18. The Supply and Demand of Technology and Engineering Teachers in the United States: Who Knows?

    Science.gov (United States)

    Moye, Johnny J.

    2017-01-01

    The purpose of this study was to determine the supply and demand of technology and engineering teachers in the United States. Once gathered, the resulting data (that was available) was compared to previous studies to determine trends. The researcher reviewed the 2010-11 through 2015-16 Technology & Engineering Teacher Education Directories. To…

  19. Recent technology for BWR nuclear steam turbine unit

    International Nuclear Information System (INIS)

    Moriya, Shin-ichi; Masuda, Toyohiko; Kashiwabara, Katsuto; Oshima, Yoshikuni

    1990-01-01

    As to the ABWR plants which is the third improvement standard boiling water reactor type plants, already the construction of a plant of 1356 MWe class for 50 Hz is planned. Hitachi Ltd. has accumulated the technology for the home manufacture of a whole ABWR plant including a turbine. As the results, the application of a butterfly type combination intermediate valve to No.5 plant in Kashiwazaki Kariwa Nuclear Power Station, Tokyo Electric Power Co., Inc., which began the commercial operation recently and later plants, the application of a moisture separating heater to No.4 plant in Hamaoka Nuclear Power Station, Chubu Electric Power Co., Inc., which is manufactured at present and later plants and so on were carried out. As to the steam turbine facilities for nuclear power generation manufactured by Hitachi Ltd., three turbines of 1100 MWe class for 50 Hz and one turbine for 60 Hz are in operation. As the new technologies for the steam turbines, the development of 52 in long last stage blades, the new design techniques for the rotor system, the moisture separating heater, the butterfly type combination intermediate valve, cross-around pipes and condensate and feedwater system are reported. (K.I.)

  20. Space-reactor electric systems: subsystem technology assessment

    International Nuclear Information System (INIS)

    Anderson, R.V.; Bost, D.; Determan, W.R.

    1983-01-01

    This report documents the subsystem technology assessment. For the purpose of this report, five subsystems were defined for a space reactor electric system, and the report is organized around these subsystems: reactor; shielding; primary heat transport; power conversion and processing; and heat rejection. The purpose of the assessment was to determine the current technology status and the technology potentials for different types of the five subsystems. The cost and schedule needed to develop these potentials were estimated, and sets of development-compatible subsystems were identified

  1. Thermionic conversion reactor technology assessment. Final report

    International Nuclear Information System (INIS)

    1984-02-01

    The in-core thermionic space nuclear power supply may be the only identified reactor-power concept that can meet the SP-100 size functional requirements with demonstrated state-of-the-art reactor system and space-qualified power system component temperatures. The SP-100 configuration limits provide a net 40 m 2 of primary non-deployed radiator area. If a reasonable 7-year degradation allowance of 15% to 20% is provided then the beginning of life (BOL) net power output requirement is about 120 kWe. Consequently, the SP-100 power system must produce a P/A of 2.7 kWe/m 2 . This non-deployed radiator area power density performance can only be reasonably achieved by the thermionic in-core convertr system, the potassium Rankine turbine system and the Stirling engine system. The purpose of this study is to examine past and current tests and data, and to assess the potential for successful development of suitable fueled-thermionic converters that will meet SP-100 and growth requirements. The basis for the assessment will be provided and the recommended key developments plan set forth

  2. Technology of research of hydroturbine unit work using seismic methods

    Science.gov (United States)

    Seleznev, V. S.; Liseikin, A. V.; Gromyko, P. V.; Soloviev, V. M.

    2013-05-01

    On August, 17, 2009 one of the most significant accident in hydropower engineering was happened at Sayano-Shushenskaya Hydroelectric Power Station. Specialists of Geophysical Survey SB RAS took part in the State Committee on investigation of the accident cause at Sayano-Shushenskaya HPS. It was determined, that the cause of the accident was a break of stud-bolts on the turbine cover. Why stud-bolts did not stand a load? There were assumptions that hydraulic shock provoked the accident. But, if it is so, seismic station "Cheremushky", situated in 4 km away from the HPS, should has a record of this event. First of all, investigating the record, got at the seismic station in the moment of the accident, it was determined that strength of seismic waves, recorded at the moment of the accident, did not exceed strength of waves got at trotyl explosion of 500 g at a distance to 4 km. The version of hydraulic shock was not proved. There were distinguished low-frequency oscillations and it was determined that the hydroturbine unit (HU) had been raised up more then 10 m in height for 10 sec. Analyzing the seismic station records during the period of more than a year before the accident and records of operating modes of different HU, there was determined that oscillations radiated by second (damaged) HU were approximately 1.5 times more intense than oscillations from all other HU. After the accident at Sayano-Shushenskaya HPS hydroturbine units were started in turns: at first there were started hydroturbine units of old construction (3, 4, 5, 6), then HP of new construction (1, 7, 8, 9). We installed 10 - 15 three-component seismic stations in different points around a HU and studied field of seismic oscillations from it's work. It was determined, that HU radiates a set of monochromatic oscillations divisible by speed of rotation equal to 2.381 Hz. Change of these signals amplitude is connected with change of HU operation modes. Research of changes in oscillations spectral

  3. New technologies and advances in colposcopic assessment.

    Science.gov (United States)

    Tan, Jeffrey H J; Wrede, C David H

    2011-10-01

    To have a good grasp of clinical colposcopy, it is necessary to understand the histopathologic structure of the normal and dysplastic cervical epithelium. Previous meta-analyses had indicated high overall sensitivity of colposcopy in detecting dysplastic lesions, but recent studies have suggested that the technique has much lower sensitivity in detecting high-grade intraepithelial neoplasia. The best practice in colposcopy relies on accurately taking a biopsy from the correct (i.e. most morphological abnormal) site, and by taking more than one biopsy, the sensitivity for detection of high-grade cervical intraepithelial neoplasia can be increased. Cytological screening programmes of proven and maintained high quality will enhance the predictive colposcopic accuracy for high-grade cervical intraepithelial neoplasia after referral. With the advent of computerised colposcopy and the Internet, digital imaging can be transmitted in real-time for instant viewing, facilitating distant consultation and education. This form of 'telemedicine' will allow family practice and remote areas to have access to colposcopy expertise. Of all the currently available technological adjuncts to colposcopy, spectroscopy devices have demonstrated relatively high sensitivities, and seem to have the best potential to become the technique of choice in future routine clinical practice in developed countries following the human papillomavirus vaccination. Other alternatives may need to be used in parts of the globe with high disease incidence and without organised screening or vaccination programmes. Opportunities remain for global collaboration in research, education and training to promote more effective and affordable cervical screening, and to enhance the skills of colposcopists worldwide. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Development of safety related technology and infrastructure for safety assessment

    International Nuclear Information System (INIS)

    Venkat Raj, V.

    1997-01-01

    Development and optimum utilisation of any technology calls for the building up of the necessary infrastructure and backup facilities. This is particularly true for a developing country like India and more so for an advanced technology like nuclear technology. Right from the inception of its nuclear power programme, the Indian approach has been to develop adequate infrastructure in various areas such as design, construction, manufacture, installation, commissioning and safety assessment of nuclear plants. This paper deals with the development of safety related technology and the relevant infrastructure for safety assessment. A number of computer codes for safety assessment have been developed or adapted in the areas of thermal hydraulics, structural dynamics etc. These codes have undergone extensive validation through data generated in the experimental facilities set up in India as well as participation in international standard problem exercises. Side by side with the development of the tools for safety assessment, the development of safety related technology was also given equal importance. Many of the technologies required for the inspection, ageing assessment and estimation of the residual life of various components and equipment, particularly those having a bearing on safety, were developed. This paper highlights, briefly, the work carried out in some of the areas mentioned above. (author)

  5. Technology transfer at Three Mile Island Unit 2

    International Nuclear Information System (INIS)

    Burton, H.M.; Bixby, W.W.

    1982-01-01

    The Department of Energy (DOE) formulated a program at TMI-2 in concert with the Coordination Agreement. The DOE TME-2 Information and Examination Program (TI and EP) aims to fulfill three general objectives. First, the TI and EP aims to obtain information from the TMI-2 accidient for resolving specific safety and licensing concerns; modifying applicable standards, specifications, and regulations; and defining changes in design, maintenance, operation, and personnel training. Second, the TI and EP uses TMI-2 information to advance technology in decontamination work; radioactive waste immobilization and disposal; system requalification; damaged fuel handling; and plant, reactor, and safety engineering. Finally, the TI and EP distributes the information gained from the Program to others that are engaged in research and development, design, construction, operation, maintenance, and regulation of nuclear power plants

  6. Reactor technology assessment and selection utilizing systems engineering approach

    Science.gov (United States)

    Zolkaffly, Muhammed Zulfakar; Han, Ki-In

    2014-02-01

    The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

  7. Low-level radioactive waste disposal technologies used outside the United States

    International Nuclear Information System (INIS)

    Templeton, K.J.; Mitchell, S.J.; Molton, P.M.; Leigh, I.W.

    1994-01-01

    Low-level radioactive waste (LLW) disposal technologies are an integral part of the waste management process. In the United States, commercial LLW disposal is the responsibility of the State or groups of States (compact regions). The United States defines LLW as all radioactive waste that is not classified as spent nuclear fuel, high- level radioactive waste, transuranic waste, or by-product material as defined in Section II(e)(2) of the Atomic Energy Act. LLW may contain some long-lived components in very low concentrations. Countries outside the United States, however, may define LLW differently and may use different disposal technologies. This paper outlines the LLW disposal technologies that are planned or being used in Canada, China, Finland, France, Germany, Japan, Sweden, Taiwan, and the United Kingdom (UK)

  8. Harnessing Technology to Assess Oral Communication in Business English

    Science.gov (United States)

    Levy, Tal; Gertler, Hedy

    2015-01-01

    Assessing oral skills in relatively large Business English classes seems a most formidable task for any teacher. How does one make sure to get multiple and valid assessments of each student? This action research paper provides supporting evidence for the correlation between the use of technology and students' engagement. This was achieved by…

  9. Voice Assessment of Student Work: Recent Studies and Emerging Technologies

    Science.gov (United States)

    Eckhouse, Barry; Carroll, Rebecca

    2013-01-01

    Although relatively little attention has been given to the voice assessment of student work, at least when compared with more traditional forms of text-based review, the attention it has received strongly points to a promising form of review that has been hampered by the limits of an emerging technology. A fresh review of voice assessment in light…

  10. Technologies for Interactive Learning and Assessment Content Development

    Science.gov (United States)

    Gusev, Marjan; Ristov, Sasko; Armenski, Goce

    2016-01-01

    Recent technology trends evolved the student assessment from traditional ones ("pen-and-paper" and "face-to-face") to modern e-Assessment system. These modern approaches allow the teachers to conduct and evaluate an exam with huge number of students in a short period of time. Even more important, both the teacher and the…

  11. Fiscal 1975 Sunshine Project research report. Technology assessment on hydrogen energy technology. Part 2; 1975 nendo suiso energy gijutsu no technology assessment seika hokokuksho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1976-03-31

    This research assesses the impact of development of practical hydrogen energy technology on the economy, society and environment in Japan, and proposes some effective countermeasures, the required technical development target and a promising promotion system. The example of technology assessment assuming practical technology several tens years after is hardly found. Hydrogen energy technology is in the first stage among (1) initial planning stage, (2) technical research and development stage, (3) practical technology stage and (4) service operation stage. In the first fiscal year, as the first stage of determination of the communication route between society and technology, study was made on the concrete system image of practical technology. In this fiscal year, study was made entirely on preparation of the scenario for imaging the future economy and society concretely, modifying the planning of the hydrogen energy system. Through comparison of the scenario and system, the meaning and problem of the hydrogen energy technology were clarified. (NEDO)

  12. Improving tag/seal technologies: the vulnerability assessment component

    International Nuclear Information System (INIS)

    Jones, J.L.

    1996-01-01

    The Department of Energy (DOE), specifically the Office of Nonproliferation and National Security, has sponsored the development of numerous tag and seal technologies for high-security/high-valued applications. One important component in this technology development effort has been the continuous integration of vulnerability assessments. The Idaho National Engineering Laboratory (INEL) has been the lead laboratory for vulnerability assessments of fiber-optic-based tag/seal technologies. This paper presents a brief historical overview and the current status of the DOE high-security tag/seal development program and discusses INEL's adversarial role and assessment philosophy. Verification testing criteria used to define ''successful'' tampering attempts/attacks are discussed. Finally, the advantages of integrating a vulnerability assessment into the development of commercial security tag/seals are presented

  13. Application of CFB technology for large power generating units and CO2 capture

    International Nuclear Information System (INIS)

    Ryabov, G. A.; Folomeev, O. M.; Sankin, D. A.; Khaneev, K. V.; Bondarenko, I. G.; Mel'nikov, D. A.

    2010-01-01

    Data on the development of the circulating fluidized bed (CFB) technology for combustion of fuels in large power generating units are examined. The problems with raising the steam parameters and unit power of boilers with a circulating fluidized bed are examined. With the boiler system at the 460 MW unit at Lagisza (Poland) as an example, the feasibility of raising the efficiency of units with CFB boilers through deep recovery of the heat of the effluent gases and reducing expenditure for in-house needs is demonstrated. Comparative estimates of the capital and operating costs of 225 and 330 MW units are used to determine the conditions for optimum use of CFB boilers in the engineering renovation of thermal power plants in Russia. New areas for the application of CFB technology in CO 2 capture are analyzed in connection with the problem of reducing greenhouse gas emissions.

  14. Assessing climate-sensitive ecosystems in the southeastern United States

    Science.gov (United States)

    Costanza, Jennifer; Beck, Scott; Pyne, Milo; Terando, Adam; Rubino, Matthew J.; White, Rickie; Collazo, Jaime

    2016-08-11

    Climate change impacts ecosystems in many ways, from effects on species to phenology to wildfire dynamics. Assessing the potential vulnerability of ecosystems to future changes in climate is an important first step in prioritizing and planning for conservation. Although assessments of climate change vulnerability commonly are done for species, fewer have been done for ecosystems. To aid regional conservation planning efforts, we assessed climate change vulnerability for ecosystems in the Southeastern United States and Caribbean.First, we solicited input from experts to create a list of candidate ecosystems for assessment. From that list, 12 ecosystems were selected for a vulnerability assessment that was based on a synthesis of available geographic information system (GIS) data and literature related to 3 components of vulnerability—sensitivity, exposure, and adaptive capacity. This literature and data synthesis comprised “Phase I” of the assessment. Sensitivity is the degree to which the species or processes in the ecosystem are affected by climate. Exposure is the likely future change in important climate and sea level variables. Adaptive capacity is the degree to which ecosystems can adjust to changing conditions. Where available, GIS data relevant to each of these components were used. For example, we summarized observed and projected climate, protected areas existing in 2011, projected sea-level rise, and projected urbanization across each ecosystem’s distribution. These summaries were supplemented with information in the literature, and a short narrative assessment was compiled for each ecosystem. We also summarized all information into a qualitative vulnerability rating for each ecosystem.Next, for 2 of the 12 ecosystems (East Gulf Coastal Plain Near-Coast Pine Flatwoods and Nashville Basin Limestone Glade and Woodland), the NatureServe Habitat Climate Change Vulnerability Index (HCCVI) framework was used as an alternative approach for assessing

  15. Assessment Training Effects on Student Assessment Skills and Task Performance in a Technology-Facilitated Peer Assessment

    Science.gov (United States)

    Liu, Xiongyi; Li, Lan

    2014-01-01

    This study examines the impact of an assessment training module on student assessment skills and task performance in a technology-facilitated peer assessment. Seventy-eight undergraduate students participated in the study. The participants completed an assessment training exercise, prior to engaging in peer-assessment activities. During the…

  16. Assessing Stream Ecosystem Condition in the United States

    Science.gov (United States)

    Faustini, John M.; Kaufmann, Philip R.; Herlihy, Alan T.; Paulsen, Steven G.

    2009-09-01

    When the U.S. Congress passed the Federal Water Pollution Control Act in 1972, later amended by the Clean Water Act (CWA) of 1977, it tasked the newly created U.S. Environmental Protection Agency (EPA), in cooperation with the states, with periodically assessing the quality of U.S. waters and reporting on progress toward meeting the goals of the CWA. In subsequent decades, reviews by various governmental and nongovernmental organizations consistently have found available water quality data and reporting to be inadequate to evaluate the nation's progress [Shapiro et al., 2008]. In response to these concerns, in 1989 EPA's Office of Research and Development initiated the Environmental Monitoring and Assessment Program (EMAP) to develop and demonstrate scientific tools to monitor the status of, and trends in, U.S. aquatic resources and environmental stressors affecting them. Recent EPA-led efforts involve monitoring wadeable perennial streams (streams or rivers shallow enough to be wadeable during seasonal low flows), which make up an estimated 90% of the total length of all perennial flowing waters in the United States [EPA, 2006]. Selected results from the first national survey of these streams, the national Wadeable Streams Assessment (WSA) [EPA, 2006; Paulsen et al., 2008], illustrate how such surveys can provide critical information to guide management of this important resource. Nonmonitoring applications of data from the WSA and earlier regional surveys show the wide-ranging applicability of these rich data sets.

  17. Technology-Supported Performance Assessments for Middle School Geoscience

    Science.gov (United States)

    Zalles, D. R.; Quellmalz, E.; Rosenquist, A.; Kreikemeier, P.

    2002-12-01

    Under funding from the World Bank, the U.S. Department of Education, the National Science Foundation, and the Federal Government's Global Learning and Observations to Benefit the Environment Program (GLOBE), SRI International has developed and piloted web-accessible performance assessments that measure K-12 students' abilities to use learning technologies to reason with scientific information and communicate evidence-based conclusions to scientific problems. This presentation will describe the assessments that pertain to geoscience at the middle school level. They are the GLOBE Assessments and EPA Phoenix, an instantiation of SRI's model of assessment design known as Integrative Performance Assessments in Technology (IPAT). All are publicly-available on the web. GLOBE engages students in scientific data collection and observation about the environment. SRI's classroom assessments for GLOBE provide sample student assessment tools and frameworks that allow teachers and students to assess how well students can use the data in scientific inquiry projects. Teachers can use classroom assessment tools on the site to develop integrated investigations for assessing GLOBE within their particular science curricula. Rubrics are provided for measuring students' GLOBE-related skills, and alignments are made to state, national, and international science standards. Sample investigations are provided about atmosphere, hydrology, landcover, soils, earth systems, and visualizations. The IPAT assessments present students with engaging problems rooted in science or social science content, plus sets of tasks and questions that require them to gather relevant information on the web, use reasoning strategies to analyze and interpret the information, use spreadsheets, word processors, and other productivity tools, and communicate evidence-based findings and recommendations. In the process of gathering information and drawing conclusions, students are assessed on how well they can operate

  18. Technology assessment - a workable way out of the 'risk society'?

    International Nuclear Information System (INIS)

    Mueller-Brandeck-Bocquet, G.

    1988-01-01

    On the basis of concrete experience and results in the risk assessment process concerning nuclear technology in the Federal Republic of Germany it becomes apparent that technology asessment can make a contribution towards the required technology domestication. The 'risk management' of the circle of nuclear power generators and the consulting and licensing bodies having failed, a new phase of technology assessment began in 1970, whereby proponents and opponents of nuclear energy had a say. Parallel research on the safety of light water reactors and fast breeders gave valuable insight into the danger potential of nuclear energy while the latent risk of technology assessment misuse became apparent in the decision-finding process concerning the problem of radioactive waste management. In the end it were the Enquete Commission 'Future Nuclear Energy Policy' of the German Bundestag and the studies on social agreeability of energy supply systems which resulted in the perspective of a future without the use of nuclear power being a realistic option. The general findings of technology assessment, e.g. the cognition that there can be no scientific decision in favour of assuming responsibility for nuclear energy, opens up new views and possibilities for acting for the decision-makers in the field of energy policy. (orig./HSCH) [de

  19. Control and automation technology in United States nuclear power plants

    International Nuclear Information System (INIS)

    Sun, B.K.H.

    1997-01-01

    The need to use computers for nuclear power plant design, engineering, operation and maintenance has been growing since the inception of commercial nuclear power electricity generation in the 1960s. The needs have intensified in recent years as the demands of safety and reliability, as well as economic competition, have become stronger. The rapid advance of computer hardware and software technology in the last two decades has greatly enlarged the potential of computer applications to plant instrumentation and control of future plants, as well as those needed for operation of existing plants. The traditional role of computers for mathematical calculations and data manipulation has been expanded to automate plant control functions and to enhance human performance and productivity. The major goals of using computers for instrumentation and control of nuclear power plants are (1) to improve safety; (2) to reduce challenges to the power plant; (3) to reduce the cost of operations and maintenance; (4) to enhance power production, and (5) to increase productivity of people. Many functions in nuclear power plants are achieved by a combination of human action and automation. Increasingly, computer-based systems are used to support operations and maintenance personnel in the performance of their tasks. There are many benefits which can accrue from the use of computers but it is important to ensure that the design and implementation of the support system and the human task places the human in the correct role in relation to the machine; that is, in a management position, with the computer serving the human. In addition, consideration must be given to computer system integrity, software validation and verification, consequences of error, etc., to ensure its reliability for nuclear power plant applications. (author). 31 refs

  20. Control and automation technology in United States nuclear power plants

    International Nuclear Information System (INIS)

    Sun, B.K.H.

    1995-01-01

    The need to use computers for nuclear power plant design, engineering, operation and maintenance has been growing since the inception of commercial nuclear power electricity generation in the 1960s. The needs have intensified in recent years as the demands of safety and reliability, as well as economic competition, have become stronger. The rapid advanced of computer hardware and software technology in the last two decades has greatly enlarged the potential of computer applications to plant instrumentation and control of future plants, as well as those needed for operation of existing plants. The traditional role of computers for mathematical calculations and data manipulation has been expanded to automate plant control functions and to enhance human performance and productivity. The major goals of using computers for instrumentation and control of nuclear power plants are: (1) to improve safety; (2) to reduce challenges to capital investments; (3) to reduce the cost of operations and maintenance; (4) to enhance power production; and (5) to increase productivity of people. Many functions in nuclear power plants are achieved by a combination of human action and automation. Increasingly, computer-based systems are used to support operations and maintenance personnel in the performance of their tasks. There are many benefits which can accrue from the use of computers but it is important to ensure that the design and implementation of the support system, and the human task places the human in the correct role in the relation to the machine; that is, in a management position, with the computer serving the human. In addition, consideration must be given to computer system integrity, software validation and verification, consequences of error, etc., to ensure its reliability for nuclear power plant applications. (author). 31 refs

  1. Control and automation technology in United States nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Sun, B K.H. [Sunutech, Inc., Los Altos, CA (United States)

    1997-07-01

    The need to use computers for nuclear power plant design, engineering, operation and maintenance has been growing since the inception of commercial nuclear power electricity generation in the 1960s. The needs have intensified in recent years as the demands of safety and reliability, as well as economic competition, have become stronger. The rapid advance of computer hardware and software technology in the last two decades has greatly enlarged the potential of computer applications to plant instrumentation and control of future plants, as well as those needed for operation of existing plants. The traditional role of computers for mathematical calculations and data manipulation has been expanded to automate plant control functions and to enhance human performance and productivity. The major goals of using computers for instrumentation and control of nuclear power plants are (1) to improve safety; (2) to reduce challenges to the power plant; (3) to reduce the cost of operations and maintenance; (4) to enhance power production, and (5) to increase productivity of people. Many functions in nuclear power plants are achieved by a combination of human action and automation. Increasingly, computer-based systems are used to support operations and maintenance personnel in the performance of their tasks. There are many benefits which can accrue from the use of computers but it is important to ensure that the design and implementation of the support system and the human task places the human in the correct role in relation to the machine; that is, in a management position, with the computer serving the human. In addition, consideration must be given to computer system integrity, software validation and verification, consequences of error, etc., to ensure its reliability for nuclear power plant applications. (author). 31 refs.

  2. ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

    Science.gov (United States)

    Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

    2018-06-13

    The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

  3. Assessment of microwave-based clinical waste decontamination unit.

    Science.gov (United States)

    Hoffman, P N; Hanley, M J

    1994-12-01

    A clinical waste decontamination unit that used microwave-generated heat was assessed for operator safety and efficacy. Tests with loads artificially contaminated with aerosol-forming particles showed that no particles were detected outside the machine provided the seals and covers were correctly seated. Thermometric measurement of a self-generated steam decontamination cycle was used to determine the parameters needed to ensure heat disinfection of the waste reception hopper, prior to entry for maintenance or repair. Bacterial and thermometric test pieces were passed through the machine within a full load of clinical waste. These test pieces, designed to represent a worst case situation, were enclosed in aluminium foil to shield them from direct microwave energy. None of the 100 bacterial test pieces yielded growth on culture and all 100 thermal test pieces achieved temperatures in excess of 99 degrees C during their passage through the decontamination unit. It was concluded that this method may be used to render safe the bulk of of ward-generated clinical waste.

  4. Assessment report on uranium in the United States of America

    International Nuclear Information System (INIS)

    1980-10-01

    Assessment of the uranium resources in the United States as of October 1, 1980, indicates a range of reserves, in mean values, from 645 thousand tons of U 3 O 8 (in the $30 per pound of U 3 O 8 cost category) to 1.122 million tons (in the $100 per pound of U 3 O 8 category). Ranges of potential resources are also shown for the same cost categories: from 885 thousand to over 2 million tons of U 3 O 8 in the probable class; 346 thousand to over 1 million tons in the possible class; and 311 thousand to nearly 700 thousand tons in the speculative class. There are an estimated 140 thousand tons of U 3 O 8 that could be recovered as a byproduct of phosphate and copper mining through the year 2009. Production capability studies indicate that the demand could be satisfied from currently estimated resources if there is a transition from current production of lower cost resources to production from the $50 per pound of U 3 O 8 resources by the mid 1990s. If, due to foreign competition or other market forces, production incentives are not maintained, domestic production potential will not be realized, and the United States could become dependent on foreign sources for much of its U 3 O 8

  5. Intensive Care Unit Nurses' Beliefs About Delirium Assessment and Management.

    Science.gov (United States)

    Oosterhouse, Kimberly J; Vincent, Catherine; Foreman, Marquis D; Gruss, Valerie A; Corte, Colleen; Berger, Barbara

    2016-10-01

    Delirium, the most frequent complication of hospitalized older adults, particularly in intensive care units (ICUs), can result in increased mortality rates and length of stay. Nurses are neither consistently identifying nor managing delirium in these patients. The purpose of this study was to explore ICU nurses' identification of delirium, actions they would take for patients with signs or symptoms of delirium, and beliefs about delirium assessment and management. In this cross-sectional study using qualitative descriptive methods guided by the theory of planned behavior, 30 ICU nurses' responses to patient vignettes depicting different delirium subtypes were explored. Descriptive and content analyses revealed that nurses did not consistently identify delirium; their actions varied in different vignettes. Nurses believed that they needed adequate staffing, balanced workload, interprofessional collaboration, and established policy and protocols to identify and manage delirium successfully. Research is needed to determine if implementing these changes increases recognition and decreases consequences of delirium. ©2016 American Association of Critical-Care Nurses.

  6. An Assessment of the Economic Potential of Offshore Wind in the United States from 2015 to 2030

    Energy Technology Data Exchange (ETDEWEB)

    Beiter, Philipp [National Renewable Energy Lab. (NREL), Golden, CO (United States); Musial, Walter [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kilcher, Levi [National Renewable Energy Lab. (NREL), Golden, CO (United States); Maness, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Smith, Aaron [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-03-29

    This study describes an assessment of the spatial variation of levelized cost of energy (LCOE) and levelized avoided cost of energy to understand the economic viability of fixed-bottom and floating offshore wind technologies across major U.S. coastal areas between 2015 and 2030. In particular, this study offers insights into the available offshore wind resource by region at different levels of LCOE and an assessment of the economically viable resource capacity in the United States.

  7. Technological and life cycle assessment of organics processing odour control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  8. Technological Implications for Assessment Ecosystems: Opportunities for Digital Technology to Advance Assessment

    Science.gov (United States)

    Behrens, John T.; DiCerbo, Kristen E.

    2014-01-01

    Background: It would be easy to think the technological shifts in the digital revolution are simple incremental progressions in societal advancement. However, the nature of digital technology is resulting in qualitative differences in nearly all parts of daily life. Purpose: This paper investigates how the new possibilities for understanding,…

  9. Health technology assessment in Australia: The role of AHTAC

    International Nuclear Information System (INIS)

    Kearney, B.; Willis, E.

    1997-01-01

    This paper outlines and discusses the field of medical technology assessment and the role of the Australian Health Technology Advisory Committee (AHTAC) in that process. Developments in medical technologies have altered the way in which health care is practised and delivered. As part of its work program, AHTAC has re-evaluating some existing medical technologies to assess how and under what circumstances new developments can contribute to the alleviation of the illness and suffering of the patients. Three case studies are described. These are: magnetic resonance imaging, diagnostic ultrasound and beam and isotope radiotherapy. It is stressed that the policy task is a complex one attempting to balance the need for cost containment whilst at the same time ensuring that the processes of innovation into Australia and diffusion occur in a manner which maximizes the benefit and minimizes any harm to the Australian community

  10. Legitimation problems of participatory processes in technology assessment and technology policy.

    Science.gov (United States)

    Saretzki, Thomas

    2012-11-01

    Since James Carroll (1971) made a strong case for "participatory technology", scientists, engineers, policy-makers and the public at large have seen quite a number of different approaches to design and implement participatory processes in technology assessment and technology policy. As these participatory experiments and practices spread over the last two decades, one could easily get the impression that participation turned from a theoretical normative claim to a working practice that goes without saying. Looking beyond the well-known forerunners and considering the ambivalent experiences that have been made under different conditions in various places, however, the "if" and "how" of participation are still contested issues when questions of technology are on the agenda. Legitimation problems indicate that attempts to justify participation in a given case have not been entirely successful in the eyes of relevant groups among the sponsors, participants, organizers or observers. Legitimation problems of participatory processes in technology assessment and technology policy vary considerably, and they do so not only with the two domains and the ways of their interrelation or the specific features of the participatory processes. If we ask whether or not participation is seen as problematic in technology assessment and technology policy-making and in what sense it is being evaluated as problematic, then we find that the answer depends also on the approaches and criteria that have been used to legitimize or delegitimize the call for a specific design of participation.

  11. Systems Maturity Assessment of the Lithium Ion Battery for Extravehicular Mobility Unit Project

    Science.gov (United States)

    Russell, Samuel P.

    2011-01-01

    The Long Life (Lithium Ion) Battery (LLB/LIB) is designed to replace the current Extravehicular Mobility Unit (EMU) Silver/Zinc (Ag/Zn) Increased Capacity Battery (ICB), which is used to provide power to the Primary Life Support Subsystem (PLSS) during Extravehicular Activities (EVAs). The LLB (a battery based on commercial lithium ion cell technology) is designed to have the same electrical and mechanical interfaces as the current ICB. The EMU LIB Charger is designed to charge, discharge, and condition the LLB either in a charger-strapped configuration or in an EMU-mounted configuration. This paper will retroactively apply the principles of Systems Maturity Assessment to the LLB project through use of the Integration Readiness Level and Earned Readiness Management. The viability of this methodology will be considered for application to new and existing technology development projects.

  12. Health Monitoring System Technology Assessments: Cost Benefits Analysis

    Science.gov (United States)

    Kent, Renee M.; Murphy, Dennis A.

    2000-01-01

    The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

  13. Assessing systemwide occupational health and safety risks of energy technologies

    International Nuclear Information System (INIS)

    Rowe, M.D.

    1982-01-01

    Input-output modelling is now being used to assess systemwide occupational and public health and safety risks of energy technologies. Some of the advantages and disadvantages of this method are presented and some of its important limitations are discussed. Its primary advantage is that it provides a standard method with which to compare technologies on a consistent basis without extensive economic analysis. Among the disadvantages are limited range of applicability, limited spectrum of health impacts, and inability to identify unusual health impacts unique to a new technology. (author)

  14. Assessment of a satellite power system and six alternative technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wolsko, T.; Whitfield, R.; Samsa, M.; Habegger, L.S.; Levine, E.; Tanzman, E.

    1981-04-01

    The satellite power system is assessed in comparison to six alternative technologies. The alternatives are: central-station terrestrial photovoltaic systems, conventional coal-fired power plants, coal-gasification/combined-cycle power plants, light water reactor power plants, liquid-metal fast-breeder reactors, and fusion. The comparison is made regarding issues of cost and performance, health and safety, environmental effects, resources, socio-economic factors, and insitutional issues. The criteria for selecting the issues and the alternative technologies are given, and the methodology of the comparison is discussed. Brief descriptions of each of the technologies considered are included. (LEW)

  15. Sustainability assessment of renewable power and heat generation technologies

    International Nuclear Information System (INIS)

    Dombi, Mihály; Kuti, István; Balogh, Péter

    2014-01-01

    Rationalisation of consumption, more efficient energy usage and a new energy structure are needed to be achieved in order to shift the structure of energy system towards sustainability. The required energy system is among others characterised by intensive utilisation of renewable energy sources (RES). RES technologies have their own advantages and disadvantages. Nevertheless, for the strategic planning there is a great demand for the comparison of RES technologies. Furthermore, there are additional functions of RES utilisation expected beyond climate change mitigation, e.g. increment of employment, economic growth and rural development. The aim of the study was to reveal the most beneficial RES technologies with special respect to sustainability. Ten technologies of power generation and seven technologies of heat supply were examined in a multi-criteria sustainability assessment frame of seven attributes which were evaluated based on a choice experiment (CE) survey. According to experts the most important characteristics of RES utilisation technologies are land demand and social impacts i.e. increase in employment and local income generation. Concentrated solar power (CSP), hydropower and geothermal power plants are favourable technologies for power generation, while geothermal district heating, pellet-based non-grid heating and solar thermal heating can offer significant advantages in case of heat supply. - highlights: • We used choice experiment to estimate the weights of criteria for the sustainability assessment of RES technologies. • The most important attributes of RES technologies according to experts are land demand and social impacts. • Concentrated solar power (CSP), hydropower and geothermal power plants are advantageous technologies for power generation. • Geothermal district heating, pellet-based non-grid heating and solar thermal heating are favourable in case of heat supply

  16. The contribution of health technology assessment, health needs assessment, and health impact assessment to the assessment and translation of technologies in the field of public health genomics.

    Science.gov (United States)

    Rosenkötter, N; Vondeling, H; Blancquaert, I; Mekel, O C L; Kristensen, F B; Brand, A

    2011-01-01

    The European Union has named genomics as one of the promising research fields for the development of new health technologies. Major concerns with regard to these fields are, on the one hand, the rather slow and limited translation of new knowledge and, on the other hand, missing insights into the impact on public health and health care practice of those technologies that are actually introduced. This paper aims to give an overview of the major assessment instruments in public health [health technology assessment (HTA), health needs assessment (HNA) and health impact assessment (HIA)] which could contribute to the systematic translation and assessment of genomic health applications by focussing at population level and on public health policy making. It is shown to what extent HTA, HNA and HIA contribute to translational research by using the continuum of translational research (T1-T4) in genomic medicine as an analytic framework. The selected assessment methodologies predominantly cover 2 to 4 phases within the T1-T4 system. HTA delivers the most complete set of methodologies when assessing health applications. HNA can be used to prioritize areas where genomic health applications are needed or to identify infrastructural needs. HIA delivers information on the impact of technologies in a wider scope and promotes informed decision making. HTA, HNA and HIA provide a partly overlapping and partly unique set of methodologies and infrastructure for the translation and assessment of genomic health applications. They are broad in scope and go beyond the continuum of T1-T4 translational research regarding policy translation. Copyright © 2010 S. Karger AG, Basel.

  17. Indicative energy technology assessment of UK shale gas extraction

    International Nuclear Information System (INIS)

    Hammond, Geoffrey P.; O’Grady, Áine

    2017-01-01

    Highlights: • UK shale gas ‘fracking’ is at a very early stage with an uncertain size of resource. • Shale gas extraction might benefit UK fuel security, as well as jobs and growth. • Potentially harmful environmental ‘side-effects’ must be monitored and regulated. • Gas bills for UK household and industrial consumers are unlikely to fall sharply. • Costs & benefits of shale gas fracking are unevenly distributed between communities. - Abstract: There is at present much interest in unconventional sources of natural gas, especially in shale gas which is obtained by hydraulic fracturing, or ‘fracking’. Boreholes are drilled and then lined with steel tubes so that a mixture of water and sand with small quantities of chemicals – the fracking fluid – can be pumped into them at very high pressure. The sand grains that wedge into the cracks induced in the shale rock by a ‘perforating gun’ then releases gas which returns up the tubes. In the United Kingdom (UK) exploratory drilling is at an early stage, with licences being issued to drill a limited number of test boreholes around the country. However, such activities are already meeting community resistance and controversy. Like all energy technologies it exhibits unwanted ‘side-effects’; these simply differ in their level of severity between the various options. Shale gas may make, for example, a contribution to attaining the UK’s statutory ‘greenhouse gas’ emissions targets, but only if appropriate and robust regulations are enforced. The benefits and disadvantages of shale gas fracking are therefore discussed in order to illustrate a ‘balance sheet’ approach. It is also argued that it is desirable to bring together experts from a range of disciplines in order to carry out energy technology assessments. That should draw on and interact with national and local stakeholders: ‘actors’ both large and small. Community engagement in a genuinely participative process – where the

  18. Sustainability assessment of heat exchanger units for spray dryers

    International Nuclear Information System (INIS)

    Caglayan, Hasan; Caliskan, Hakan

    2017-01-01

    In this study, the sustainability assessment is performed to the system known as heat exchanger unit with spray dryer. The five-different dead state temperatures (0-5-10-15-20 °C) are considered. It is found that the heat exchanger has the highest energy efficiency (63.32%), while the overall system has the lowest one (5.56%). So, the combination of the spray dryer with the heat exchanger is more effective. On the other hand, the overall exergy efficiency of the system is lower than the heat exchanger and spray dryer for all of the dead state (environmental) temperatures. The exergy efficiency of the heat exchanger is inversely proportional to the dead state temperature, and the maximum rate is found as 49.65% at 0 °C. Furthermore, the exergy efficiencies of the spray dryer and overall system are directly proportional to the dead state temperatures, and the corresponding maximum rates are found to be 26.41% and 24.32% at 20 °C, respectively. Also, the exergy destruction is directly proportional to the dead state temperatures. The minimum and maximum exergy destruction rates are found at the dead state temperatures of 0 °C and 20 °C, respectively. Furthermore, the most sustainable system is found as the heat exchanger unit. - Highlights: • Thermodynamic analyses of industrial heat exchangers and spray dryers. • Sustainability of heat exchangers for spray dryers. • Dead state temperature effects on exergy efficiencies of heat exchangers and spray dryers.

  19. Process for Selecting System Level Assessments for Human System Technologies

    Science.gov (United States)

    Watts, James; Park, John

    2006-01-01

    The integration of many life support systems necessary to construct a stable habitat is difficult. The correct identification of the appropriate technologies and corresponding interfaces is an exhaustive process. Once technologies are selected secondary issues such as mechanical and electrical interfaces must be addressed. The required analytical and testing work must be approached in a piecewise fashion to achieve timely results. A repeatable process has been developed to identify and prioritize system level assessments and testing needs. This Assessment Selection Process has been defined to assess cross cutting integration issues on topics at the system or component levels. Assessments are used to identify risks, encourage future actions to mitigate risks, or spur further studies.

  20. Effects of Patient Care Unit Design and Technology on Nurse and Patient Care Technician Communication.

    Science.gov (United States)

    Beck, Mary S; Doscher, Mindy

    2018-04-01

    The current study described RN and patient care technician (PCT) communication in centralized and hybrid decentralized workstation designs using hands-free communication technology and infrared locator badge technology to facilitate communication. New construction of an oncology unit provided the opportunity to compare staff communication in two different workstation designs. Observations and questionnaires compared nurse and PCT communication in the two-unit designs. Descriptive statistics were used to analyze the differences. The hybrid decentralized unit had increased use of hands-free communication technology and hallway communication by nurses and PCTs, and increased patient room communication by nurses. Perceptions of communication between nurses and PCTs and congruency of priorities for care were similar for both units. The locator badge technology had limited adoption. Replacement of nurse workstations with new construction or remodeling impact staff communication patterns, necessitating that nurse leaders understand the impact of design and technology on communication. [Journal of Gerontological Nursing, 44(4), 17-22.]. Copyright 2018, SLACK Incorporated.

  1. Health technology assessment in Iran: challenges and views

    Science.gov (United States)

    Olyaeemanesh, Alireza; Doaee, Shila; Mobinizadeh, Mohammadreza; Nedjati, Mina; Aboee, Parisa; Emami-Razavi, Seyed Hassan

    2014-01-01

    Background: Various decisions have been made on technology application at all levels of the health system in different countries around the world. Health technology assessment is considered as one of the best scientific tools at the service of policy- makers. This study attempts to investigate the current challenges of Iran’s health technology assessment and provide appropriate strategies to establish and institutionalize this program. Methods: This study was carried out in two independent phases. In the first, electronic databases such as Medline (via Pub Med) and Scientific Information Database (SID) were searched to provide a list of challenges of Iran’s health technology assessment. The views and opinions of the experts and practitioners on HTA challenges were studied through a questionnaire in the second phase which was then analyzed by SPSS Software version 16. This has been an observational and analytical study with a thematic analysis. Results: In the first phase, seven papers were retrieved; from which, twenty- two HTA challenges in Iran were extracted by the researchers; and they were used as the base for designing a structured questionnaire of the second phase. The views of the experts on the challenges of health technology assessment were categorized as follows: organizational culture, stewardship, stakeholders, health system management, infrastructures and external pressures which were mentioned in more than 60% of the cases and were also common in the views. Conclusion: The identification and prioritization of HTA challenges which were approved by those experts involved in the strategic planning of the Department of Health Technology Assessment will be a step forward in the promotion of an evidence- based policy- making and in the production of comprehensive scientific evidence. PMID:25695015

  2. Zumbro Hydroelectric Project: installation of third unit. Feasibility assessment report

    Energy Technology Data Exchange (ETDEWEB)

    Williamson, James V.

    1979-03-01

    The feasibility of adding a third generating unit at an existing hydro power plant near Rochester, Minn. was examined considering the economic, technical, and environmental aspects. Installation of the unit, aiming at an Oct. 1983 completion date, is recommended. (LCL)

  3. Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk

    Science.gov (United States)

    2017-10-01

    assessing behavioral and cognitive markers of risk for suicide among U.S. Army National Guard personnel. Journal of Environmental Research and Public Policy...effective ways to prevent injury and death from suicide • No reliable method for predicting suicide risk in military personnel • Behavioral (e.g...AWARD NUMBER: W81XWH-15-1-0632 TITLE: Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk PRINCIPAL INVESTIGATOR: Brian

  4. An assessment of Brazilian conservation units – a second look

    OpenAIRE

    Drummond, José Augusto Leitão

    2012-01-01

    This is a second overview of the Brazilian conservation unit system for mid-2010. It updates author et al, 2009. It examines six dimensions of federal and state protected areas – age, numbers, types of units, absolute and average sizes, distribution by states and biomes, and degree of compliance with CBD-inspired goals. Major findings: (i) the system maintained a rapid growth rate; (ii) national parks and national forests are the most prominent units; (iii) distribution of units by region and...

  5. Statistical assessment of the learning curves of health technologies.

    Science.gov (United States)

    Ramsay, C R; Grant, A M; Wallace, S A; Garthwaite, P H; Monk, A F; Russell, I T

    2001-01-01

    (1) To describe systematically studies that directly assessed the learning curve effect of health technologies. (2) Systematically to identify 'novel' statistical techniques applied to learning curve data in other fields, such as psychology and manufacturing. (3) To test these statistical techniques in data sets from studies of varying designs to assess health technologies in which learning curve effects are known to exist. METHODS - STUDY SELECTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): For a study to be included, it had to include a formal analysis of the learning curve of a health technology using a graphical, tabular or statistical technique. METHODS - STUDY SELECTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): For a study to be included, it had to include a formal assessment of a learning curve using a statistical technique that had not been identified in the previous search. METHODS - DATA SOURCES: Six clinical and 16 non-clinical biomedical databases were searched. A limited amount of handsearching and scanning of reference lists was also undertaken. METHODS - DATA EXTRACTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): A number of study characteristics were abstracted from the papers such as study design, study size, number of operators and the statistical method used. METHODS - DATA EXTRACTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): The new statistical techniques identified were categorised into four subgroups of increasing complexity: exploratory data analysis; simple series data analysis; complex data structure analysis, generic techniques. METHODS - TESTING OF STATISTICAL METHODS: Some of the statistical methods identified in the systematic searches for single (simple) operator series data and for multiple (complex) operator series data were illustrated and explored using three data sets. The first was a case series of 190 consecutive laparoscopic fundoplication procedures performed by a single surgeon; the second

  6. The NICE ADHD health technology assessment: A review and critique

    Directory of Open Access Journals (Sweden)

    Schlander Michael

    2008-01-01

    Full Text Available Abstract Background Health technology assessments (HTAs by the National Institute for Health and Clinical Excellence (NICE enjoy high levels of international attention. The present analysis addresses NICE's appraisal of methylphenidate, atomoxetine and dexamphetamine for attention-deficit/hyperactivity disorder (ADHD in children and adolescents, published in March 2006. Methods A qualitative study of NICE Technology Appraisal No. 98 was done focusing on the >600-page technology assessment report, which aimed at evaluating ADHD treatment strategies by a clinical effectiveness review and an economic analysis using meta-analytical techniques and a cost-effectiveness model. Results The technology assessment was unable to differentiate between the various drugs in terms of efficacy, and its economic model was ultimately driven by cost differences. While the assessment concluded that the economic model "clearly identified an optimal treatment strategy" with first-line dexamphetamine, the NICE appraisal committee subsequently found it impossible to distinguish between the different strategies on grounds of cost-effectiveness. Analyzing the assessment reveals gaps and inconsistencies concerning data selection (ultimately relying on a small number of short-term studies only, data synthesis (pooling of heterogeneous study designs and clinical endpoints, and economic model structure (identifying double-counting of nonresponders as a likely source of bias, alongside further methodological anomalies. Conclusion Many conclusions of the NICE technology assessment rest on shaky grounds. There remains a need for a new, state-of-the-art systematic review of ADHD treatment strategies including economic evaluation, which ideally should address outcomes beyond children's health-related quality of life, such as long-term sequelae of the disorder and caregiver burden.

  7. Incorporating the Technology Roadmap Uncertainties into the Project Risk Assessment

    International Nuclear Information System (INIS)

    Bonnema, B.E.

    2002-01-01

    This paper describes two methods, Technology Roadmapping and Project Risk Assessment, which were used to identify and manage the technical risks relating to the treatment of sodium bearing waste at the Idaho National Engineering and Environmental Laboratory. The waste treatment technology under consideration was Direct Vitrification. The primary objective of the Technology Roadmap is to identify technical data uncertainties for the technologies involved and to prioritize the testing or development studies to fill the data gaps. Similarly, project management's objective for a multi-million dollar construction project includes managing all the key risks in accordance to DOE O 413.3 - ''Program and Project Management for the Acquisition of Capital Assets.'' In the early stages, the Project Risk Assessment is based upon a qualitative analysis for each risk's probability and consequence. In order to clearly prioritize the work to resolve the technical issues identified in the Technology Roadmap, the issues must be cross- referenced to the project's Risk Assessment. This will enable the project to get the best value for the cost to mitigate the risks

  8. Health technology assessment, value-based decision making, and innovation.

    Science.gov (United States)

    Henshall, Chris; Schuller, Tara

    2013-10-01

    Identifying treatments that offer value and value for money is becoming increasingly important, with interest in how health technology assessment (HTA) and decision makers can take appropriate account of what is of value to patients and to society, and in the relationship between innovation and assessments of value. This study summarizes points from an Health Technology Assessment International (HTAi) Policy Forum discussion, drawing on presentations, discussions among attendees, and background papers. Various perspectives on value were considered; most place patient health at the core of value. Wider elements of value comprise other benefits for: patients; caregivers; the health and social care systems; and society. Most decision-making systems seek to take account of similar elements of value, although they are assessed and combined in different ways. Judgment in decisions remains important and cannot be replaced by mathematical approaches. There was discussion of the value of innovation and of the effects of value assessments on innovation. Discussion also included moving toward "progressive health system decision making," an ongoing process whereby evidence-based decisions on use would be made at various stages in the technology lifecycle. Five actions are identified: (i) development of a general framework for the definition and assessment of value; development by HTA/coverage bodies and regulators of (ii) disease-specific guidance and (iii) further joint scientific advice for industry on demonstrating value; (iv) development of a framework for progressive licensing, usage, and reimbursement; and (v) promoting work to better adapt HTA, coverage, and procurement approaches to medical devices.

  9. Multipurpose units: combining of technological operations of a soil cultivating and seeding

    Directory of Open Access Journals (Sweden)

    D. A. Petukhov

    2015-01-01

    Full Text Available The modern domestic market of technique for grain crops seeding differs variety of machines brands and types. The intensive type technologies combining technological operations of a soil cultivating and grain crops seeding in one pass are more widely used. The authors have established that one-operational units in new machine park have to be replaced multipurpose, universal and combined machines. Such approach will reduce number of machines in grain production from 20-30 to 5-6 name titles. Possibilities of multipurpose sowing units for simultaneous fertilizers application, soil cultivating and weeds destruction were analyzed. It was specified that nowadays there are several technologies types with two, four or six operations overlapping. Operational performance, technological and economical efficiency of the best multipurpose and also efficiency of technological operations overlapping at grain crops cultivating in the conditions of their real operation and at a trial establishment in the Kuban research institute of information and technical and economic studies of agro-industrial complex engineering and technical services were studied. Tit was defined that use of multipurpose sowing units and also studied efficiency of decreases operational costs by 48-71 percent, fuel consumption - by 41-76 percent and reduces labor input by 72-80 percent. Thus grain crops seeding is possible in optimal agrotime because of 4-6 technological operations overlapping in one pass.

  10. Reimbursement of pharmaceuticals: Reference pricing versus health technology assessment

    NARCIS (Netherlands)

    M. Drummond (Michael); B. Jönsson (Bengt); F.F.H. Rutten (Frans); T. Stargardt (Tom)

    2011-01-01

    textabstractReference pricing and health technology assessment are policies commonly applied in order to obtain more value for money from pharmaceuticals. This study focussed on decisions about the initial price and reimbursement status of innovative drugs and discussed the consequences for market

  11. Technology Applications for Children with ADHD: Assessing the Empirical Support.

    Science.gov (United States)

    Xu, Chunzhen; Reid, Robert; Steckelberg, Allen

    2002-01-01

    This article reviews technology research (n=20) with students with attention deficit hyperactivity disorder (ADHD) in five categories: computer-assisted instruction, computer-based cognitive training, biofeedback training, assessment, and behavior modification. Analysis of available research suggests there is little well controlled experimental…

  12. Geospatial Technology In Environmental Impact Assessments – Retrospective.

    Directory of Open Access Journals (Sweden)

    Goparaju Laxmi

    2015-10-01

    Full Text Available Environmental Impact Assessments are studies conducted to give us an insight into the various impacts caused by an upcoming industry or any developmental activity. It should address various social, economic and environmental issues ensuring that negative impacts are mitigated. In this context, geospatial technology has been used widely in recent times.

  13. Mapping of health technology assessment in selected countries

    NARCIS (Netherlands)

    Oortwijn, W.; Broos, P.; Vondeling, Hindrik; Banta, D.; Todorova, L.

    2013-01-01

    Objectives: The aim of this study was to develop and apply an instrument to map the level of health technology assessment (HTA) development at country level in selected countries. We examined middle-income countries (Argentina, Brazil, India, Indonesia, Malaysia, Mexico, and Russia) and countries

  14. EASETECH – A LCA model for assessment of environmental technologies

    DEFF Research Database (Denmark)

    Damgaard, Anders; Baumeister, Hubert; Astrup, Thomas Fruergaard

    2014-01-01

    EASETECH is a new model for the environmental assessment of environmental technologies developed in collaboration between DTU Environment and DTU Compute. EASETECH is based on experience gained in the field of waste management modelling over the last decade and applies the same concepts to systems...

  15. The ECLSS Advanced Automation Project Evolution and Technology Assessment

    Science.gov (United States)

    Dewberry, Brandon S.; Carnes, James R.; Lukefahr, Brenda D.; Rogers, John S.; Rochowiak, Daniel M.; Mckee, James W.; Benson, Brian L.

    1990-01-01

    Viewgraphs on Environmental Control and Life Support System (ECLSS) advanced automation project evolution and technology assessment are presented. Topics covered include: the ECLSS advanced automation project; automatic fault diagnosis of ECLSS subsystems descriptions; in-line, real-time chemical and microbial fluid analysis; and object-oriented, distributed chemical and microbial modeling of regenerative environmental control systems description.

  16. Future of health technology assessment studies in gene and cell ...

    African Journals Online (AJOL)

    However, as should be noted, health care decisions need to be based on Health Technology Assessments (HTA) that should be based on objective criteria as efficacy, effectiveness, quality, safety, psychological, social, ethical, organisational and professional implications as well as cost effectiveness and further macro ...

  17. An Assessment of Information Technology and the Gender Question ...

    African Journals Online (AJOL)

    This study aimed at assessing the impact of knowledge of information technology on gender discrimination in the Nigeria's civil service work, 1200 civil servants with varied demographic characteristics randomly selected from 6 states capitals across the country participated in this study. The mean age for males and females ...

  18. Assessment of research needs for wind turbine rotor materials technology

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Engineering and Technical Systems; Division on Engineering and Physical Sciences; National Research Council; National Academy of Sciences

    1991-01-01

    ... on Assessment of Research Needs for Wind Turbine Rotor Materials Technology Energy Engineering Board Commission on Engineering and Technical Systems National Research Council NATIONAL ACADEMY PRESS Washington, D.C. 1991 Copyrightthe true use are Please breaks Page inserted. accidentally typesetting been have may original the from errors not...

  19. A DECADE OF HEALTH TECHNOLOGY ASSESSMENT IN POLAND

    NARCIS (Netherlands)

    Lipska, Iga; McAuslane, James Neil; Leufkens, Bert; Hövels, Anke

    OBJECTIVES: The objective of this study is to illustrate and provide a better understanding of the role of health technology assessment (HTA) processes in decision making for drug reimbursement in Poland and how this approach could be considered by other countries of limited resources. METHODS: We

  20. Constructive technology assessment of emerging nanotechnologies : experiments in interactions

    NARCIS (Netherlands)

    Robinson, D.K.R.

    2010-01-01

    In January 2003, the Dutch R&D consortium NanoNed (at first supported by special NanoImpulse funding) started its work, and from the beginning it included a component on Technology Assessment and Societal Aspects of Nanotechnology, organized as an additional “flagship”, labelled TA NanoNed. The

  1. Levelised unit electricity cost comparison of alternate technologies for baseload generation in Ontario

    Energy Technology Data Exchange (ETDEWEB)

    Ayres, M.; McRae, M.; Stogran, M.

    2004-08-15

    This report provides a comparison of the lifetime cost of constructing, operating and decommissioning new generation suitable for supplying baseload power by early in the next decade. New baseload generation options in Ontario are nuclear, coal-fired steam turbines or combined cycle gas turbines (CCGT). Nuclear and coal-fired units are characterised by high capital costs and low operating costs. As such, they are candidates for baseload operation only. Gas-fired generation is characterised by lower capital costs and higher operating costs and thus may meet the requirements for operation as peaking and/or baseload generation. The comparison of baseload generating technologies is made by reference to the estimated levelised unit electricity cost (LUEC). The LUEC can be thought of as a 'supply cost', where the unit cost is the price needed to recover all costs over the period. It is determined by finding the price that sets the sum of all future discounted cash flows (net present value, or NPV) to zero. It can also be thought of as representing the constant real wholesale price of electricity that meets the financing cost, debt repayment, income tax and cash flow constraints associated with the construction operation and decommissioning of a generating plant. Levelised unit cost comparisons are usually made with different sets of financing assumptions. This report considers two base cases, which we describe as 'merchant' and 'public' financing. The term 'merchant plant' is used to refer to ones that are built and operated by private investors. These investors pay for their capital through debt and by raising equity, and thus pay return on equity and interest on debt throughout their lifetime. These projects include income taxes, both provincial and federal. Publicly financed projects typically are not subject to income taxes or to the same constraints on raising finance through issuing debt and equity. However, they are

  2. Levelised unit electricity cost comparison of alternate technologies for baseload generation in Ontario

    International Nuclear Information System (INIS)

    Ayres, M.; McRae, M.; Stogran, M.

    2004-08-01

    This report provides a comparison of the lifetime cost of constructing, operating and decommissioning new generation suitable for supplying baseload power by early in the next decade. New baseload generation options in Ontario are nuclear, coal-fired steam turbines or combined cycle gas turbines (CCGT). Nuclear and coal-fired units are characterised by high capital costs and low operating costs. As such, they are candidates for baseload operation only. Gas-fired generation is characterised by lower capital costs and higher operating costs and thus may meet the requirements for operation as peaking and/or baseload generation. The comparison of baseload generating technologies is made by reference to the estimated levelised unit electricity cost (LUEC). The LUEC can be thought of as a 'supply cost', where the unit cost is the price needed to recover all costs over the period. It is determined by finding the price that sets the sum of all future discounted cash flows (net present value, or NPV) to zero. It can also be thought of as representing the constant real wholesale price of electricity that meets the financing cost, debt repayment, income tax and cash flow constraints associated with the construction operation and decommissioning of a generating plant. Levelised unit cost comparisons are usually made with different sets of financing assumptions. This report considers two base cases, which we describe as 'merchant' and 'public' financing. The term 'merchant plant' is used to refer to ones that are built and operated by private investors. These investors pay for their capital through debt and by raising equity, and thus pay return on equity and interest on debt throughout their lifetime. These projects include income taxes, both provincial and federal. Publicly financed projects typically are not subject to income taxes or to the same constraints on raising finance through issuing debt and equity. However, they are constrained to provide a rate of return. The

  3. Integration of tablet technologies in the e-laboratory of cytology: a health technology assessment.

    Science.gov (United States)

    Giansanti, Daniele; Pochini, Marco; Giovagnoli, Maria Rosaria

    2014-10-01

    Although tablet systems are becoming a powerful technology, particularly useful in every application of medical imaging, to date no one has investigated the acceptance and performance of this technology in digital cytology. The specific aims of the work were (1) to design a health technology assessment (HTA) tool to assess, in terms of performance and acceptance, the introduction of tablet technologies (wearable, portable, and non portable) in the e-laboratories of cytology and (2) to test the tool in a first significant application of digital cytology. An HTA tool was proposed operating on a domain of five dimensions of investigation comprising the basic information of the product of digital cytology, the perceived subjective quality of images, the assessment of the virtual navigation on the e-slide, the assessment of the information and communication technologies features, and the diagnostic power. Six e-slides regarding studies of cervicovaginal cytology digitalized by means of an Aperio ( www.aperio.com ) scanner and uploaded onto the www.digitalslide.it Web site were used for testing the methodology on three different network connections. Three experts of cytology successfully tested the methodology on seven tablets found suitable for the study in their own standard configuration. Specific indexes furnished by the tool indicated both a high degree of performance and subjective acceptance of the investigated technology. The HTA tool thus could be useful to investigate new tablet technologies in digital cytology and furnish stakeholders with useful information that may help them make decisions involving the healthcare system. From a global point of view the study demonstrates the feasibility of using the tablet technology in digital cytology.

  4. Radiologic assessment in the pediatric intensive care unit

    International Nuclear Information System (INIS)

    Markowitz, R.I.

    1984-01-01

    The severely ill infant or child who requires admission to a pediatric intensive care unit (PICU) often presents with a complex set of problems necessitating multiple and frequent management decisions. Diagnostic imaging plays an important role, not only in the initial assessment of the patient's condition and establishing a diagnosis, but also in monitoring the patient's progress and the effects of interventional therapeutic measures. Bedside studies obtained using portable equipment are often limited but can provide much useful information when a careful and detailed approach is utilized in producing the radiograph and interpreting the examination. This article reviews some of the basic principles of radiographic interpretation and details some of the diagnostic points which, when promptly recognized, can lead to a better understanding of the patient's condition and thus to improved patient care and management. While chest radiography is stressed, studies of other regions including the upper airway, abdomen, skull, and extremities are discussed. A brief consideration of the expanding role of new modality imaging (i.e., ultrasound, CT) is also included. Multiple illustrative examples of common and uncommon problems are shown

  5. DECISION ANALYSIS AND TECHNOLOGY ASSESSMENTS FOR METAL AND MASONRY DECONTAMINATION TECHNOLOGIES

    International Nuclear Information System (INIS)

    Ebadian, M.A.

    1999-01-01

    The purpose of this investigation was to conduct a comparative analysis of innovative technologies for the non-aggressive removal of coatings from metal and masonry surfaces and the aggressive removal of one-quarter to one-inch thickness of surface from structural masonry. The technologies tested should be capable of being used in nuclear facilities. Innovative decontamination technologies are being evaluated under standard, non-nuclear conditions at the FIU-HCET technology assessment site in Miami, Florida. This study is being performed to support the OST, the Deactivation and Decommissioning (D and D) Focus Area, and the environmental restoration of DOE facilities throughout the DOE complex by providing objective evaluations of currently available decontamination technologies

  6. Cyclone Boiler Field Testing of Advanced Layered NOx Control Technology in Sioux Unit 1

    Energy Technology Data Exchange (ETDEWEB)

    Marc A. Cremer; Bradley R. Adams

    2006-06-30

    A four week testing program was completed during this project to assess the ability of the combination of deep staging, Rich Reagent Injection (RRI), and Selective Non-Catalytic Reduction (SNCR) to reduce NOx emissions below 0.15 lb/MBtu in a cyclone fired boiler. The host site for the tests was AmerenUE's Sioux Unit 1, a 500 MW cyclone fired boiler located near St. Louis, MO. Reaction Engineering International (REI) led the project team including AmerenUE, FuelTech Inc., and the Electric Power Research Institute (EPRI). This layered approach to NOx reduction is termed the Advanced Layered Technology Approach (ALTA). Installed RRI and SNCR port locations were guided by computational fluid dynamics (CFD) based modeling conducted by REI. During the parametric testing, NOx emissions of 0.12 lb/MBtu were achieved consistently from overfire air (OFA)-only baseline NOx emissions of 0.25 lb/MBtu or less, when firing the typical 80/20 fuel blend of Powder River Basin (PRB) and Illinois No.6 coals. From OFA-only baseline levels of 0.20 lb/MBtu, NOx emissions of 0.12 lb/MBtu were also achieved, but at significantly reduced urea flow rates. Under the deeply staged conditions that were tested, RRI performance was observed to degrade as higher blends of Illinois No.6 were used. NOx emissions achieved with ALTA while firing a 60/40 blend were approximately 0.15 lb/MBtu. NOx emissions while firing 100% Illinois No.6 were approximately 0.165 lb/MBtu. Based on the performance results of these tests, economics analyses of the application of ALTA to a nominal 500 MW cyclone unit show that the levelized cost to achieve 0.15 lb/MBtu is well below 75% of the cost of a state of the art SCR.

  7. Techno-experiential design assessment and media experience database: A method for emerging technology assessment

    OpenAIRE

    Schick, Dan

    2005-01-01

    This thesis evaluates the Techno-Experiential Design Assessment (TEDA) for social research on new media and emerging technology. Dr. Roman Onufrijchuk developed TEDA to address the shortcomings of current methods designed for studying existing technologies. Drawing from the ideas of Canadian media theorist Marshall McLuhan, TEDA focuses on the environmental changes introduced by a new technology into a user's life. I describe the key components of the TEDA methodology and provide examples of ...

  8. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

  9. Assessment of material and technical resources of crop production technologies

    Directory of Open Access Journals (Sweden)

    V. M. Beylis

    2017-01-01

    Full Text Available The author explains the general principles of influence of the material and technical resources (MTR on performance and efficiency of the main technological operations in crop production. Various technologies from the point of view of MTR expenses were estimated. The general tendencies in development of crop production technologies were revealed. The distribution of costs of materials and equipment to perform a variety of agricultural activities was determined. Cost indicators should be a guide in the search of innovative technological processes and working elements of agricultural machins. The greatest values of expenses of work, fuel, metal, and also, money where found. The concepts allowing to provide costs production reduction were formulated. To achieve the maximum productivity with the minimum expenses, the perspective calculations shoul be based on «progressive» agrotechnologies. When determining progressive agrotechnology it is necessary on reasonable grounds to approach indicators of crop productivity in various agrozones and regions of the country. For an assessment of efficiency of MTR by crop production and ensuring decrease in resource intensity of agricultural products by search and use of essentially new technologies for energy saving when performing agricultural operations, an integrated percentage indicator of comparison of progressive technologies with the applied ones was developed. MTR at application of new progressive crop production technologies by integrated percentage index were estimated. This indicator can be used for definition of efficiency of MTR. Application of the offered technique will promote an effective assessment of MTR, decrease in resource intensity by search and developments of essentially new technologies of performance of operations in crop production.

  10. Assessment of international remedial technologies for application to Superfund sites

    International Nuclear Information System (INIS)

    Sanning, D.E.

    1990-01-01

    This paper presents some of the logical arguments for conducting research on remedial technologies for contaminated land and groundwater at an international level. It gives information on many of the international organizations that are involved in environmental programs, but it especially gives emphasis to the NATO-CCMS pilot study on Demonstration of Remedial Action Technologies for Contaminated Land and Groundwater. The purpose of the study is to field demonstrate and evaluate new/innovative technologies for remedial action at uncontrolled hazardous waste sites. This study is a logical international extension of the US EPA SITE program. It offers the opportunity to obtain a multiple data base on various remedial action unit processes without any single country having to commit a disproportionate amount of its internal resources to any specific activity. Each participating country provides the necessary resources for those demonstrations which they are contributing to the study. Sites are selected by a majority vote of all participating countries (no country is permitted to vote for its own sites). The study is a 5 year program with participants from Canada, Denmark, Federal Republic of Germany, France, Greece, Italy, Japan, the Netherlands, Norway, Spain, and the US. The need for cost-effective remedial action technologies for hazardous waste sites is a problem of all industrialized countries. The need to build a knowledge base of emerging remedial technologies was the impetus behind the USEPA's lead role and commitment to this pilot study

  11. Precast concrete unit assessment through GPR survey and FDTD modelling

    Science.gov (United States)

    Campo, Davide

    2017-04-01

    Precast concrete elements are widely used within United Kingdom house building offering ease in assembly and added values as structural integrity, sound and thermal insulation; most common concrete components include walls, beams, floors, panels, lintels, stairs, etc. The lack of respect of the manufacturer instruction during assembling, however, may induce cracking and short/long term loss of bearing capacity. GPR is a well-established not destructive technique employed in the assessment of structural elements because of real-time imaging, quickness of data collecting and ability to discriminate finest structural details. In this work, GPR has been used to investigate two different precast elements: precast reinforced concrete planks constituting the roof slab of a school and precast wood-cement blocks with insulation material pre-fitted used to build a perimeter wall of a private building. Visible cracks affected both constructions. For the assessment surveys, a GSSI 2.0 GHz GPR antenna has been used because of the high resolution required and the small size of the antenna case (155 by 90 by 105mm) enabling scanning up to 45mm from any obstruction. Finite Difference Time Domain (FDTD) numerical modelling was also performed to build a scenario of the expected GPR signal response for a preliminary real-time interpretation and to help solve uncertainties due to complex reflection patterns: simulated radargrams were built using Reflex Software v. 8.2, reproducing the same GPR pulse used for the surveys in terms of wavelet, nominal frequency, sample frequency and time window. Model geometries were derived from the design projects available both for the planks and the blocks; the electromagnetic properties of the materials (concrete, reinforcing bars, air-filled void, insulation and wooden concrete) were inferred from both values reported in literature and a preliminary interpretation of radargrams where internal layer interfaces were clearly recognizable and

  12. Assessment of materials selection and performance for direct-coal- liquefaction plants in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Olsen, A.R.; Judkins, R.R.; Keiser, J.R.

    1996-09-01

    Several direct coal liquefaction processes have been demonstrated at the pilot plant level in the United States. Presently only one plant remains operational, namely, the Hydrocarbon Technologies, Inc., 4.0- ton-per-day process development unit in Lawrenceville, New Jersey. The period from 1974 to 1982 saw the greatest amount of development of direct coal liquefaction in the United States with four major pilot plants being devoted to variants of this technology. The plants included the SRC-I plant at Wilsonville, Alabama, which operated from 1974 to 1992; the SRC-I/II plant at Fort Lewis, Washington, which operated from 1974 to 1981; the H-Coal plant at Catlettsburg, Kentucky, which operated from 1980 to 1982; and the Exxon Coal Liquefaction Pilot Plant at Baytown, Texas, which operated from 1980 to 1982. Oak Ridge National Laboratory scientists and engineers were actively involved in many phases and technical disciplines at all four of these plants, especially in materials testing, evaluation, and failure analyses. In addition, ORNL materials scientists and engineers conducted reviews of the demonstration and commercial plant designs for materials selections. The ORNL staff members worked closely with materials engineers at the pilot plants in identifying causes of materials degradation and failures, and in identifying solutions to these problems. This report provides a comprehensive summary of those materials activities. Materials performance data from laboratory and coal liquefaction pilot plant tests, failure analyses, and analyses of components after use in pilot plants were reviewed and assessed to determine the extent and causes of materials degradation in direct coal liquefaction process environments. Reviews of demonstration and commercial plant design documents for materials selections were conducted. These reviews and assessments are presented to capture the knowledge base on the most likely materials of construction for direct coal liquefaction plants.

  13. An Ethnographic Study of Health Information Technology Use in Three Intensive Care Units.

    Science.gov (United States)

    Leslie, Myles; Paradis, Elise; Gropper, Michael A; Kitto, Simon; Reeves, Scott; Pronovost, Peter

    2017-08-01

    To identify the impact of a full suite of health information technology (HIT) on the relationships that support safety and quality among intensive care unit (ICU) clinicians. A year-long comparative ethnographic study of three academic ICUs was carried out. A total of 446 hours of observational data was collected in the form of field notes. A subset of these observations-134 hours-was devoted to job-shadowing individual clinicians and conducting a time study of their HIT usage. Significant variation in HIT implementation rates and usage was noted. Average HIT use on the two "high-use" ICUs was 49 percent. On the "low-use" ICU, it was 10 percent. Clinicians on the high-use ICUs experienced "silo" effects with potential safety and quality implications. HIT work was associated with spatial, data, and social silos that separated ICU clinicians from one another and their patients. Situational awareness, communication, and patient satisfaction were negatively affected by this siloing. HIT has the potential to accentuate social and professional divisions as clinical communications shift from being in-person to electronically mediated. Socio-technically informed usability testing is recommended for those hospitals that have yet to implement HIT. For those hospitals already implementing HIT, we suggest rapid, locally driven qualitative assessments focused on developing solutions to identified gaps between HIT usage patterns and organizational quality goals. © Health Research and Educational Trust.

  14. Whole Language, Computers and CD-ROM Technology: A Kindergarten Unit on "Benjamin Bunny."

    Science.gov (United States)

    Balajthy, Ernest

    A kindergarten teacher, two preservice teachers, and a college consultant on educational computer technology designed and developed a 10-day whole-language integrated unit on the theme of Beatrix Potter's "Benjamin Bunny." The project was designed as a demonstration of the potential of integrating the CD-ROM-based version of…

  15. Stages of Adoption Concern and Technology Acceptance in a Critical Care Nursing Unit.

    Science.gov (United States)

    Berg, Gina M; LoCurto, Jamie; Lippoldt, Diana

    2017-09-01

    The aim of this study is to examine the stages of concern (self, task, and impact) and usability (trust, perceived usefulness, and ease of use) shifts experienced by nurses adopting new technology. Patient care processes in critical care units can be disrupted with the incorporation of information technology. New users of technology typically transition through stages of concern and experience shifts in acceptance during assimilation. Critical care nurses (N = 41) were surveyed twice: (1) pre, immediately after training, and (2) post, 3 months after implementation of technology. From presurvey to postsurvey, self-concerns decreased 14%, whereas impact concerns increased 22%. Furthermore, there was a 30% increase in trust and a 17% increase in perceived usefulness, even with a 27% decrease in ease of use. Adoption of new technology requires critical care nurses to adapt current practices, which may improve trust and perceived usefulness yet decrease perceptions of ease of use.

  16. Review of early assessment models of innovative medical technologies.

    Science.gov (United States)

    Fasterholdt, Iben; Krahn, Murray; Kidholm, Kristian; Yderstræde, Knud Bonnet; Pedersen, Kjeld Møller

    2017-08-01

    Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision problem, and a description of the early assessment model. 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants of traditional cost-effectiveness analysis. Around one fourth of the studies presented an evaluation model with a broader focus than cost-effectiveness. Uncertainty was mostly handled by simple sensitivity or scenario analysis. This review shows that evaluation models using known methods assessing cost-effectiveness are most prevalent in early assessment, but seems ill-suited for early assessment in hospitals. Four models provided some usable elements for the development of a hospital-based model. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

  17. The Atrial Fibrillation Health Literacy Information Technology System: Pilot Assessment.

    Science.gov (United States)

    Magnani, Jared W; Schlusser, Courtney L; Kimani, Everlyne; Rollman, Bruce L; Paasche-Orlow, Michael K; Bickmore, Timothy W

    2017-01-01

    Atrial fibrillation (AF) is a highly prevalent heart rhythm condition that has significant associated morbidity and requires chronic treatment. Mobile health (mHealth) technologies have the potential to enhance multiple aspects of AF care, including education, monitoring of symptoms, and encouraging and tracking medication adherence. We have previously implemented and tested relational agents to improve outcomes in chronic disease and sought to develop a smartphone-based relational agent for improving patient-centered outcomes in AF. The objective of this study was to pilot a smartphone-based relational agent as preparation for a randomized clinical trial, the Atrial Fibrillation Health Literacy Information Technology Trial (AF-LITT). We developed the relational agent for use by a smartphone consistent with our prior approaches. We programmed the relational agent as a computer-animated agent to simulate a face-to-face conversation and to serve as a health counselor or coach specific to AF. Relational agent's dialogue content, informed by a review of literature, focused on patient-centered domains and qualitative interviews with patients with AF, encompassed AF education, common symptoms, adherence challenges, and patient activation. We established that the content was accessible to individuals with limited health or computer literacy. Relational agent content coordinated with use of the smartphone AliveCor Kardia heart rate and rhythm monitor. Participants (N=31) were recruited as a convenience cohort from ambulatory clinical sites and instructed to use the relational agent and Kardia for 30 days. We collected demographic, social, and clinical characteristics and conducted baseline and 30-day assessments of health-related quality of life (HRQoL) with the Atrial Fibrillation Effect on Quality of life (AFEQT) measure; self-reported medication adherence with the Morisky 8-item Medication Adherence Scale (MMAS-8); and patient activation with the Patient Activation

  18. Social and ethical analysis in health technology assessment.

    Science.gov (United States)

    Tantivess, Sripen

    2014-05-01

    This paper presents a review of the domestic and international literature on the assessment of the social and ethical implications of health technologies. It gives an overview of the key concepts, principles, and approaches that should be taken into account when conducting a social and ethical analysis within health technology assessment (HTA). Although there is growing consensus among healthcare experts that the social and ethical ramifications of a given technology should be examined before its adoption, the demand for this kind of analysis among policy-makers around the world, including in Thailand, has so far been lacking. Currently decision-makers mainly base technology adoption decisions using evidence on clinical effectiveness, value for money, and budget impact, while social and ethical aspects have been neglected. Despite the recognized importance of considering equity, justice, and social issues when making decisions regarding health resource allocation, the absence of internationally-accepted principles and methodologies, among other factors, hinders research in these areas. Given that developing internationally agreed standards takes time, it has been recommended that priority be given to defining processes that are justifiable, transparent, and contestable. A discussion of the current situation in Thailand concerning social and ethical analysis of health technologies is also presented.

  19. Multiple criteria decision analysis for health technology assessment.

    Science.gov (United States)

    Thokala, Praveen; Duenas, Alejandra

    2012-12-01

    Multicriteria decision analysis (MCDA) has been suggested by some researchers as a method to capture the benefits beyond quality adjusted life-years in a transparent and consistent manner. The objectives of this article were to analyze the possible application of MCDA approaches in health technology assessment and to describe their relative advantages and disadvantages. This article begins with an introduction to the most common types of MCDA models and a critical review of state-of-the-art methods for incorporating multiple criteria in health technology assessment. An overview of MCDA is provided and is compared against the current UK National Institute for Health and Clinical Excellence health technology appraisal process. A generic MCDA modeling approach is described, and the different MCDA modeling approaches are applied to a hypothetical case study. A comparison of the different MCDA approaches is provided, and the generic issues that need consideration before the application of MCDA in health technology assessment are examined. There are general practical issues that might arise from using an MCDA approach, and it is suggested that appropriate care be taken to ensure the success of MCDA techniques in the appraisal process. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  20. Economical-environmental assessment on technologies producing electric energy

    International Nuclear Information System (INIS)

    Najafzadeh, K.

    2000-01-01

    Currently, the electric power industry is undergoing substantial regulatory and organizational change with respect to economical and environmental aspects. Under these circumstances, with utilization of analytic hierarchy process (AHP) concept, we consider the assessment of Technologies producing energy from financial and pollution viewpoint. AHP techniques is one of the efficient methods in analysis of complex and multi-criteria problems, which has plenty of applications. General pattern of this assessment has been introduced, and the main goal is determining of overall priority weights for each technology. With using this pattern, overall priority weights has been determined for thermal, combined cycle and Gas turbine plants. It has been cleared that relative priority of these plants will change, if relative priority of assessment criterions changes. For application of this approach, capital budgeting process and selection of some suitable technologies among the alternatives candidate for construction have been presented. In this process the objective is to maximize the sum of overall priority weights of technologies which have been identified from AHP. Constraints are about the construction budget and annual budget for emission allowances. This process is in the integer programming IP form an has been applied to three kind of power plants with reasonable assumptions

  1. The role of surgeons in identifying emerging technologies for health technology assessment.

    Science.gov (United States)

    Stafinski, Tania; Topfer, Leigh-Ann; Zakariasen, Ken; Menon, Devidas

    2010-04-01

    Health technology assessment (HTA) is a tool intended to help policy-makers decide which technologies to fund. However, given the proliferation of new technologies, it is not possible to undertake an HTA of each one before it becomes funded. Consequently, "horizon-scanning" processes have been developed to identify emerging technologies that are likely to have a substantial impact on clinical practice. Although the importance of physicians in the adoption of new technologies is well recognized, their role in horizon scanning in Canada has been limited. The purpose of this project was to pilot an approach to engage physicians, specifically surgeons, in provincial horizon-scanning activities. We invited 18 surgeons from Alberta's 2 medical schools to a horizon-scanning workshop to solicit their views on emerging technologies expected to impact surgical practice within the next 5 years and/or the importance of different attributes or characteristics of new technologies. Surgeons, regardless of specialty, identified developments designed to enhance existing minimally invasive surgical techniques, such as endoscopic, robotic and image-guided surgery. Several nonsurgical areas, including molecular genetics and nano technology, were also identified. Of the 13 technology attributes discussed, safety or risk, effectiveness and feasibility were rated as most important. Lastly, participating surgeons expressed an interest in becoming further involved in local HTA initiatives. Surgeons, as adopters and users of health technologies, represent an important and accessible information source for identifying emerging technologies for HTA. A more formal, ongoing relationship between the government, HTA and surgeons may help to optimize the use of HTA resources.

  2. Human factors assessments of D and D technologies

    International Nuclear Information System (INIS)

    Carpenter, C.P.; Evans, T.T.; McCabe, B.

    2000-01-01

    On April 2, 1997, the US Secretary of Energy directed the US Assistant Secretary of Environmental Management and of Safety and Health to require field input of appropriate data to ensure that safety and health considerations were properly addressed in the Accelerating Cleanup: Focus on 2006 Plan. The US Department of Energy (DOE) field managers have committed to the Secretary that they will fully implement integrated safety management systems (ISMSs) at their respective sites by the end of fiscal year 1999. The Secretary has further directed that headquarters safety and health guidance be developed to support consistent and comprehensive project baseline summaries from the field. The Secretary has committed to institutionalizing ISMS as an integral component of the way the DOE conducts its business. The Defense Nuclear Facilities Safety Board continues to oversee and closely monitor the DOE's commitment to the safety and health of its workers. The DOE is committed to a management system approach to ensure that work is performed in a manner that protects the worker, public, and environment. The Deactivation and Decommissioning Focus Area (DDFA) is actively addressing the need to incorporate environmental safety and health (ES and H) considerations in developing technologies. The DDFA is partnered with the Operating Engineers National Hazmat Program (OENHP) to evaluate the ES and H considerations of the innovative and improved decontamination and decommissioning technologies. Part of the implementation of the ES and H work practices in the field is through a cooperative agreement between the National Energy Technology Laboratory (NETL) and the OENHP. The objective of this program is to establish an International Environmental Technology and Training Center to conduct human factors assessments and protocols on environmental technologies. The intent of the human factors assessments is to enhance the effectiveness and efficiency of the technologies and to enhance

  3. FY 1974 report on the results of the Sunshine Project. Technology assessment of hydrogen energy technology; 1974 nendo suiso energy gijutsu no technology assessment seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1975-04-30

    This is aimed at studying the relation between the technology development of hydrogen energy and the society. In Chapter 1, a meaning of technology assessment was examined. When applying it to the hydrogen energy technology, the paper presented what content it has. In Chapter 2, the needs for hydrogen energy in society were made clear in comparison with the energy supply/demand structure in Japan and characteristics of hydrogen energy. In Chapter 3, the paper showed what kinds of technology are being developed to meet the needs in this society and arranged viewpoints for evaluating the effectiveness of the technology. In Chapter 4, the paper studied the positioning of hydrogen energy technology in the future society, and presented as examples more than one hydrogen energy/system plans which become the base to describe the impact of the technology on the society. If taking technology assessment as a part of the communication activities between the technology development and the society as did in this study, these system plans are something like the ring for people in each field to talk with. In Chapter 5, the study made from each aspect was arranged. (NEDO)

  4. Pixels, Blocks of Pixels, and Polygons: Choosing a Spatial Unit for Thematic Accuracy Assessment

    Science.gov (United States)

    Pixels, polygons, and blocks of pixels are all potentially viable spatial assessment units for conducting an accuracy assessment. We develop a statistical population-based framework to examine how the spatial unit chosen affects the outcome of an accuracy assessment. The populati...

  5. Hanford Tank Farm Vapors Abatement Technology and Vendor Proposals Assessment

    International Nuclear Information System (INIS)

    Burns, H. H.; Farrar, M. E.; Fink, S. D.

    2016-01-01

    Suspected chemical vapor releases from the Hanford nuclear waste tank system pose concerns for worker exposure. Washington River Protection Solutions (WRPS) contracted the Savannah River National Laboratory (SRNL) to explore abatement technologies and strategies to remediate the vapors emitted through the ventilation system. In response, SRNL conducted an evaluation of technologies to abate, or reduce, vapor emissions to below 10% of the recognized occupational exposure limits (OELs). The evaluation included a review of published literature and a broadly communicated Request for Information to commercial vendors through a Federal Business Opportunities (Fed Biz Opps) web posting. In addition, SRNL conducted a workshop and post-workshop conference calls with interested suppliers (vendors) to assess proposals of relevant technologies. This report reviews applicable technologies and summarizes the approaches proposed by the vendors who participated in the workshop and teleconference interviews. In addition, the report evaluates the estimated performance of the individual technologies for the various classes of chemical compounds present in the Hanford Chemicals of Potential Concern (COPCs) list. Similarly, the report provides a relative evaluation of the vendor proposed approaches against criteria of: technical feasibility (and maturity), design features, operational considerations, secondary waste generation, safety/regulatory, and cost / schedule. These rough order-of-magnitude (ROM) cost estimates are intended to provide a comparison basis between technologies and are not intended to be actual project estimates.

  6. Hanford Tank Farm Vapors Abatement Technology and Vendor Proposals Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Burns, H. H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Farrar, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fink, S. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-20

    Suspected chemical vapor releases from the Hanford nuclear waste tank system pose concerns for worker exposure. Washington River Protection Solutions (WRPS) contracted the Savannah River National Laboratory (SRNL) to explore abatement technologies and strategies to remediate the vapors emitted through the ventilation system. In response, SRNL conducted an evaluation of technologies to abate, or reduce, vapor emissions to below 10% of the recognized occupational exposure limits (OELs). The evaluation included a review of published literature and a broadly communicated Request for Information to commercial vendors through a Federal Business Opportunities (Fed Biz Opps) web posting. In addition, SRNL conducted a workshop and post-workshop conference calls with interested suppliers (vendors) to assess proposals of relevant technologies. This report reviews applicable technologies and summarizes the approaches proposed by the vendors who participated in the workshop and teleconference interviews. In addition, the report evaluates the estimated performance of the individual technologies for the various classes of chemical compounds present in the Hanford Chemicals of Potential Concern (COPCs) list. Similarly, the report provides a relative evaluation of the vendor proposed approaches against criteria of: technical feasibility (and maturity), design features, operational considerations, secondary waste generation, safety/regulatory, and cost / schedule. These rough order-of-magnitude (ROM) cost estimates are intended to provide a comparison basis between technologies and are not intended to be actual project estimates.

  7. What influences the choice of assessment methods in health technology assessments? Statistical analysis of international health technology assessments from 1989 to 2002.

    Science.gov (United States)

    Draborg, Eva; Andersen, Christian Kronborg

    2006-01-01

    Health technology assessment (HTA) has been used as input in decision making worldwide for more than 25 years. However, no uniform definition of HTA or agreement on assessment methods exists, leaving open the question of what influences the choice of assessment methods in HTAs. The objective of this study is to analyze statistically a possible relationship between methods of assessment used in practical HTAs, type of assessed technology, type of assessors, and year of publication. A sample of 433 HTAs published by eleven leading institutions or agencies in nine countries was reviewed and analyzed by multiple logistic regression. The study shows that outsourcing of HTA reports to external partners is associated with a higher likelihood of using assessment methods, such as meta-analysis, surveys, economic evaluations, and randomized controlled trials; and with a lower likelihood of using assessment methods, such as literature reviews and "other methods". The year of publication was statistically related to the inclusion of economic evaluations and shows a decreasing likelihood during the year span. The type of assessed technology was related to economic evaluations with a decreasing likelihood, to surveys, and to "other methods" with a decreasing likelihood when pharmaceuticals were the assessed type of technology. During the period from 1989 to 2002, no major developments in assessment methods used in practical HTAs were shown statistically in a sample of 433 HTAs worldwide. Outsourcing to external assessors has a statistically significant influence on choice of assessment methods.

  8. Health technology assessment to optimize health technology utilization: using implementation initiatives and monitoring processes.

    Science.gov (United States)

    Frønsdal, Katrine B; Facey, Karen; Klemp, Marianne; Norderhaug, Inger Natvig; Mørland, Berit; Røttingen, John-Arne

    2010-07-01

    The way in which a health technology is used in any particular health system depends on the decisions and actions of a variety of stakeholders, the local culture, and context. In 2009, the HTAi Policy Forum considered how health technology assessment (HTA) could be improved to optimize the use of technologies (in terms of uptake, change in use, or disinvestment) in such complex systems. In scoping, it was agreed to focus on initiatives to implement evidence-based guidance and monitoring activities. A review identified systematic reviews of implementation initiatives and monitoring activities. A two-day deliberative workshop was held to discuss key papers, members' experiences, and collectively address key questions. This consensus paper was developed by email and finalized at a postworkshop meeting. Evidence suggests that the impact and use of HTA could be increased by ensuring timely delivery of relevant reports to clearly determined policy receptor (decision-making) points. To achieve this, the breadth of assessment, implementation initiatives such as incentives and targeted, intelligent dissemination of HTA result, needs to be considered. HTA stakeholders undertake a variety of monitoring activities, which could inform optimal use of a technology. However, the quality of these data varies and is often not submitted to an HTA. Monitoring data should be sufficiently robust so that they can be used in HTA to inform optimal use of technology. Evidence-based implementation initiatives should be developed for HTA, to better inform decision makers at all levels in a health system about the optimal use of technology.

  9. Emerging technologies in electricity generation : an energy market assessment

    International Nuclear Information System (INIS)

    2006-03-01

    Canada's National Energy Board (NEB) monitors the supply of electricity as well as its demand in both domestic and export markets. It monitors the main drivers affecting current trends in generation, demand, prices, infrastructure additions, and inter-regional and international trade. This document presented an assessment of renewable and other emerging technologies that are considered to have significant promise and increased application in Canada over the longer term. It provided comprehensive information on the status and prospects for these technologies, related issues and regional perspectives. Alternative and renewable resources and demand management are becoming more important in addressing air quality issues and supply adequacy. In preparation of this report, staff at the NEB participated in a series of informal meetings with electric utilities, independent power producers, provincial energy regulators, power system operators and those engaged in technology development. The report involved on-site information gathering at wind farms, small hydro facilities, biomass, solar and geothermal operations and other facilities associated with emerging energy technologies such as fuel cells and ocean energy. Clean coal technologies that refer to methods by which emissions from coal-fired generation can be reduced were also evaluated. It was noted that the prospects for emerging technologies vary among the provinces and territories depending on regional resources, provincial government policies and strategies regarding fuel preferences. It was noted that currently in Canada, only 3 per cent of the installed generating capacity consists of emerging technologies. This low penetration is due to the low cost of electricity derived from conventional sources and to the structure of the industry in which large publicly owned utilities have historically opted for large central generating stations. It was suggested that the large increase in fossil fuel prices, public concern

  10. Preliminary nuclear power reactor technology qualitative assessment for Malaysia

    International Nuclear Information System (INIS)

    Shamsul Amri Sulaiman

    2011-01-01

    Since the worlds first nuclear reactor major breakthrough in December 02, 1942, the nuclear power industry has undergone tremendous development and evolution for more than half a century. After surpassing moratorium of nuclear power plant construction caused by catastrophic accidents at Three-mile island (1979) and Chernobyl (1986), today, nuclear energy is back on the policy agendas of many countries, both developed and developing, signaling nuclear revival or nuclear renaissance. Selection of suitable nuclear power technology has thus been subjected to primary attention. This short paper attempts to draw preliminary technology assessment for the first nuclear power reactor technology for Malaysia. Methodology employed is qualitative analysis collating recent finding of tnb-kepco preliminary feasibility study for nuclear power program in peninsular malaysia and other published presentations and/or papers by multiple experts. The results suggested that pressurized water reactor (PWR) is the prevailing technology in terms of numbers and plant performances, and while the commercialization of generation IV reactors is remote (e.g. Not until 2030), generation III/ III+ NPP models are commercially available on the market today. Five (5) major steps involved in reactor technology selection were introduced with a focus on introducing important aspects of selection criteria. Three (3) categories for the of reactor technology selection were used for the cursory evaluation. The outcome of these analyses shall lead to deeper and full analyses of the recommended reactor technologies for a comprehensive feasibility study in the near future. Recommendations for reactor technology option were also provided for both strategic and technical recommendations. The paper shall also implore the best way to select systematically the first civilian nuclear power reactor. (Author)

  11. Technical and economic assessment of energy conversion technologies for MSW

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, W.R.

    2002-07-01

    Thermal processes for municipal solid wastes (MSW) based on pyrolysis and/or gasification that have relevance to the emerging UK market are described in this report, and the results of the technical and economical assessment of these processes are presented. The Mitsui R21 Technology, the Thermoselect Process, the Nippon Steel Waste Melting Process, the Pyropleq Process, and the Compact Power Process are selected for detailed comparison on the basis of the overall technical concept, the energy balance and the requirements for consumables, environmental performance, and the technical and commercial status of the technology. Details are also given of a comparison of the novel thermal technologies with conventional mass burn incineration for MSW.

  12. Technical and economic assessment of energy conversion technologies for MSW

    International Nuclear Information System (INIS)

    Livingston, W.R.

    2002-01-01

    Thermal processes for municipal solid wastes (MSW) based on pyrolysis and/or gasification that have relevance to the emerging UK market are described in this report, and the results of the technical and economical assessment of these processes are presented. The Mitsui R21 Technology, the Thermoselect Process, the Nippon Steel Waste Melting Process, the Pyropleq Process, and the Compact Power Process are selected for detailed comparison on the basis of the overall technical concept, the energy balance and the requirements for consumables, environmental performance, and the technical and commercial status of the technology. Details are also given of a comparison of the novel thermal technologies with conventional mass burn incineration for MSW

  13. Health technology assessment: research trends and future priorities in Europe.

    Science.gov (United States)

    Nielsen, Camilla Palmhøj; Funch, Tina Maria; Kristensen, Finn Børlum

    2011-07-01

    To provide an overview of health services research related to health technology assessment (HTA) and to identify research priorities from a European perspective. Several methods were used: systematic review of articles indexed with the MeSH term 'technology assessment' in PubMed from February 1999-2009; online survey among experts; and conference workshop discussions. Research activity in HTA varies considerably across Europe. The research was categorised into six areas: (1) the breadth of analysis in HTA (such as economic, organizational and social aspects); (2) HTA products developed to meet the needs of policy-makers (such as horizon scanning, mini-HTA, and core HTA); (3) handling life-cycle perspectives in relation to technologies; (4) topics that challenge existing methods and for which HTA should be developed to address the themes more comprehensively (such as public health interventions and organizational interventions); (5) development of HTA capacity and programmes; and (6) links between policy and HTA. An online survey showed that the three areas that were given priority were the relationship between HTA and policy-making (71%), the impact of HTA (62%) and incorporating patient aspects in HTA (50%). Policy-makers highlighted HTA and innovation processes as their main research priority (42%). Areas that the systematic review identified as future priorities include issues within the six existing research areas such as disinvestment, developing evidence for new technologies, assessing the wider effects of technology use, and determining how HTA affects decision-making. In addition, relative effectiveness and individualized treatments are areas of growing interest. The research priorities identified are important for obtaining high quality and cost-effective health care in Europe. Managing the introduction, use and phasing out of technologies challenges health services throughout Europe, and these processes need to be improved to successfully manage future

  14. Refined avian risk assessment for chlorpyrifos in the United States.

    Science.gov (United States)

    Moore, Dwayne R J; Teed, R Scott; Greer, Colleen D; Solomon, Keith R; Giesy, John P

    2014-01-01

    Refined risk assessments for birds exposed to flowable and granular formulations ofCPY were conducted for a range of current use patterns in the United States. Overall,the collective evidence from the modeling and field study lines of evidence indicate that flowable and granular CPY do not pose significant risks to the bird communities foraging in agro-ecosystems in the United States. The available information indicates that avian incidents resulting from the legal, registered uses of CPY have been very infrequent since 2002 (see SI Appendix 3). The small number of recent incidents suggests that the current labels for CPY are generally protective of birds.However, incident data are uncertain because of the difficulties associated with finding dead birds in the field and linking any mortality observed to CPY.Plowable CPY is registered for a variety of crops in the United States including alfalfa, brassica vegetables, citrus, corn, cotton, grape, mint, onion, peanut, pome and stone fruits, soybean, sugar beet, sunflower, sweet potato, tree nuts, and wheat under the trade name Lorsban Advanced. The major routes of exposure for birds to flowable CPY were consumption of treated dietary items and drinking water. The Liquid Pesticide Avian Risk Assessment Model (Liquid PARAM) was used to simulate avian ingestion of CPY by these routes of exposure. For acute exposure,Liquid PARAM estimated the maximum retained dose in each of 20 birds on each of1,000 fields that were treated with CPY over the 60-d period following initial application.The model used a 1-h time step. For species lacking acceptable acute oral toxicity data (all focal species except northern bobwhite (C. virginianus) and redwinged blackbird (A. phoeniceus)), a species sensitivity distribution (SSD) approach was used to generate hypothetical dose-response curves assuming high, median and low sensitivity to CPY. For acute risk, risk curves were generated for each use pattern and exposure scenario. The risk

  15. Environmental assessment of solid waste systems and technologies: EASEWASTE

    DEFF Research Database (Denmark)

    Kirkeby, Janus Torsten; Birgisdottir, Harpa; Hansen, Trine Lund

    2006-01-01

    A new model has been developed for evaluating the overall resource consumption and environmental impacts of municipal solid waste management systems by the use of life cycle assessment. The model is named EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies) and is able...... may not always be the most environmentally friendly. The EASEWASTE model can identify the most environmentally sustainable solution, which may differ among waste materials and regions and can add valuable information about environmental achievements from each process in a solid waste management system....... to compare different waste management strategies, waste treatment methods and waste process technologies. The potential environmental impacts can be traced back to the most important processes and waste fractions that contribute to the relevant impacts. A model like EASEWASTE can be used by waste planners...

  16. International conference on comparative assessments of solar power technologies

    International Nuclear Information System (INIS)

    Roy, A.

    1994-02-01

    Many regions in the world which lack fossil fuel resources but possess ample sunshine seek to identify near-term solar technologies capable of gradually replacing their fuel imports in cost-effective fashion. The conference addresses the following topics: technical and economical studies specifying their underlying basic assumption, methods and rules for evaluation in order to enable meaningful comparison between different technologies and systems. Detailed delineation of numerical and graphical representations, critical analysis and comparison between simulations, and test validity. Generalized performance indicators for systems and subsystems, problems of measuring and evaluating physical parameters, of terminology and conceptual tools for comparative evaluations. Advances in research development, engineering and field performance, including implications pertaining to comparative assessments and definitions of criteria and standards helpful to comparative evaluation. Assessments of the full (and hidden) cost of fossil energies as compared to solar, including environmental costs. Cost/benefit studies for remote versus centralized systems. (ed.)

  17. National Wind Technology Center sitewide, Golden, CO: Environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

  18. National Wind Technology Center sitewide, Golden, CO: Environmental assessment

    International Nuclear Information System (INIS)

    1996-11-01

    The National Renewable Energy Laboratory (NREL), the nation's primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate

  19. China, the United States, and competition for resources that enable emerging technologies

    Science.gov (United States)

    Gulley, Andrew L.; Nassar, Nedal T.; Xun, Sean

    2018-01-01

    Historically, resource conflicts have often centered on fuel minerals (particularly oil). Future resource conflicts may, however, focus more on competition for nonfuel minerals that enable emerging technologies. Whether it is rhenium in jet engines, indium in flat panel displays, or gallium in smart phones, obscure elements empower smarter, smaller, and faster technologies, and nations seek stable supplies of these and other nonfuel minerals for their industries. No nation has all of the resources it needs domestically. International trade may lead to international competition for these resources if supplies are deemed at risk or insufficient to satisfy growing demand, especially for minerals used in technologies important to economic development and national security. Here, we compare the net import reliance of China and the United States to inform mineral resource competition and foreign supply risk. Our analysis indicates that China relies on imports for over half of its consumption for 19 of 42 nonfuel minerals, compared with 24 for the United States—11 of which are common to both. It is for these 11 nonfuel minerals that competition between the United States and China may become the most contentious, especially for those with highly concentrated production that prove irreplaceable in pivotal emerging technologies.

  20. Big data and technology assessment: research topic or competitor?

    DEFF Research Database (Denmark)

    Rieder, Gernot; Simon, Judith

    2017-01-01

    With its promise to transform how we live, work, and think, Big Data has captured the imaginations of governments, businesses, and academia. However, the grand claims of Big Data advocates have been accompanied with concerns about potential detrimental implications for civil rights and liberties......, leading to a climate of clash and mutual distrust between different stakeholders. Throughout the years, the interdisciplinary field of technology assessment (TA) has gained considerable experience in studying socio-technical controversies and as such is exceptionally well equipped to assess the premises...... considerations on how TA might contribute to more responsible data-based research and innovation....

  1. Framework for dementia Quality of Life assessment with Assistive Technology

    DEFF Research Database (Denmark)

    Peterson, Carrie Beth; Prasad, Neeli R.; Prasad, Ramjee

    2010-01-01

    This paper proposes a theoretical framework for a Quality of Life (QOL) evaluation tool that is sensitive, flexible, computerized, and specific to assistive technology (AT) for dementia care. Using the appropriate evaluation tool serves to improve methodologies that are used for AT assessment...... to assessing QOL is that results are subjective and difficult to analyze in an objective, empirical manner. This paper accentuates that this is not a hindrance to measuring OQL, but could be emphasized and adapted to create a precise measurement tool; the consumer voice must be sought and empowered...

  2. Impacts of reproductive technologies on beef production in the United States.

    Science.gov (United States)

    Dahlen, Carl; Larson, Jamie; Lamb, G Cliff

    2014-01-01

    Estimations of world population growth indicate that by the year 2050 we will reach nine billion habitants on earth. These estimates impose a tremendous challenge in the current agricultural systems as food supply will need to increase by 100 % in the next 40 years (Food and Agriculture Organization of the United Nations 2009). Beef will be a primary protein source that will assist in meeting the requirements for a portion of the protein in diets of this expanding global populace. Beef is a high-quality protein that contains all essential amino acids for the human body and also contains additional essential nutrients such as iron, zinc, B vitamins, riboflavin, selenium, choline, and conjugated linoleic acid (CLA). Adopting reproductive technologies at greater rates than currently used is a viable method to dramatically enhance production efficiency of beef cattle enterprises.Artificial insemination (AI), estrous synchronization and fixed-time AI (TAI), semen and embryo cryopreservation, multiple ovulation and embryo transfer (MOET), in vitro fertilization, sex determination of sperm or embryos, and nuclear transfer are technologies that are used to enhance the production efficiency of beef operations. In many cases, the development of these technologies is responsible for significant changes to traditional livestock production practices. However, adoption of these technologies appears to has not grown at the same rate in the United States as other formidable beef producing nations. For example, sales of beef semen for AI increased from 3.3 to 11.9 million units between 1993 and 2011 in Brazil, whereas that in the United States has increased from 2.9 to 3.8 million units during the same period. The significant increases in adoption of reproductive technologies in developing countries is likely as a result of the development of practical estrous synchronization and TAI systems that have allowed beef producers the opportunity to eliminate detection of estrus in their

  3. Technology assessment of long distance liquid natural gas pipelines

    Energy Technology Data Exchange (ETDEWEB)

    1977-02-01

    This document contains phases 7, 8, and 9 of a review on the technology assessment of long distance liquefied natural gas (LNG) pipelines. Phase 7 contains 6 papers describing novel applications for LNG pipelines. Phase 8 contains a summary of material relating to cold utilization and rural service. Phase 9 presents a listing of materials and equipment used to construct an LNG pipeline. Separate abstracts for each phase of the study have been prepared for inclusion in the Energy Data Base. (DMC)

  4. Teknologvurdering, Broer og Brugere (Technology Assessment: Bridges and Users)

    DEFF Research Database (Denmark)

    Munch, Birgitte

    A critique of the scientific approaches grounding Danish technology assessments for beingnon-reflexive upon the consequences of its biased treatment of who and how some countsas ‘users'. Implications and new approaches are outlined in a story of engineering designers conceptualization of ships pa...... passing the Great Belt - the ‘sailing users' - during the constructionof the suspension bridge across the east channel. A story about 'How the Great BeltEast bridge main span got the length of 1624m....

  5. Methodology for the comparative assessment of the Satellite Power System (SPS) and alternative technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wolsko, T.; Buehring, W.; Cirillo, R.; Gasper, J.; Habegger, L.; Hub, K.; Newsom, D.; Samsa, M.; Stenehjem, E.; Whitfield, R.

    1980-01-01

    A description of the initial methodology for the Comparative Assessment of the Satellite Power System Concept Development and Evaluation Program of NASA and DOE is presented. Included are study objectives, issue identification, units of measurement, methods, and data bases. The energy systems concerned are the satellite power system, several coal technologies, geothermal energy, fission, fusion, terrestrial solar systems, and ocean thermal energy conversion. Guidelines are suggested for the characterization of these systems, side-by-side analysis, alternative futures analysis, and integration and aggregation of data. The bulk of this report is a description of the methods for assessing the technical, economic, environmental, societal, and institutional issues surrounding the development of the selected energy technologies.

  6. Zero-emission vehicle technology assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Woods, T.

    1995-08-01

    This is the final report in the Zero-Emission Vehicle (ZEV) Technology Assessment, performed for NYSERDA by Booz-Allen & Hamilton Inc. Booz-Allen wrote the final report, and performed the following tasks as part of the assessment: assembled a database of key ZEV organizations, their products or services, and plans; described the current state of ZEV technologies; identified barriers to widespread ZEV deployment and projected future ZEV technical capabilities; and estimated the cost of ZEVs from 1998 to 2004. Data for the ZEV Technology Assessment were obtained from several sources, including the following: existing ZEV industry publications and Booz-Allen files; major automotive original equipment manufacturers; independent electric vehicle manufacturers; battery developers and manufacturers; infrastructure and component developers and manufacturers; the U.S. Department of Energy, the California Air Resources Board, and other concerned government agencies; trade associations such as the Electric Power Research Institute and the Electric Transportation Coalition; and public and private consortia. These sources were contacted by phone, mail, or in person. Some site visits of manufacturers also were conducted. Where possible, raw data were analyzed by Booz-Allen staff and/or verified by independent sources. Performance data from standardized test cycles were used as much as possible.

  7. Technology and economic assessment of lactic acid production and uses

    Energy Technology Data Exchange (ETDEWEB)

    Datta, R.; Tsai, S.P.

    1996-03-01

    Lactic acid has been an intermediate-volume specialty chemical (world production {approximately}50,000 tons/yr) used in a wide range of food-processing and industrial applications. Potentially, it can become a very large-volume, commodity-chemical intermediate produced from carbohydrates for feedstocks of biodegradable polymers, oxygenated chemicals, environmentally friendly ``green`` solvents, and other intermediates. In the past, efficient and economical technologies for the recovery and purification of lactic acid from fermentation broths and its conversion to the chemical or polymer intermediates had been the key technology impediments and main process cost centers. Development and deployment of novel separations technologies, such as electrodialysis with bipolar membranes, extractive and catalytic distillations, and chemical conversion, can enable low-cost production with continuous processes in large-scale operations. The emerging technologies can use environmentally sound lactic acid processes to produce environmentally useful products, with attractive process economics. These technology advances and recent product and process commercialization strategies are reviewed and assessed.

  8. Technology assessment of various coal-fuel options

    International Nuclear Information System (INIS)

    Coenen, R.; Findling, B.; Klein-Vielhauer, S.; Nieke, E.; Paschen, H.; Tangen, H.; Wintzer, D.

    1991-01-01

    The technology assessment (TA) study of coal-based fuels presented in this report was performed for the Federal Ministry for Research and Technology. Its goal was to support decision-making of the Federal Ministry for Research and Technology in the field of coal conversion. Various technical options of coal liquefaction have been analyzed on the basis of hard coal as well as lignite -- direct liquefaction of coal (hydrogenation) and different possibilities of indirect liquefaction, that is the production of fuels (methanol, gasoline) by processing products of coal gasification. The TA study takes into consideration the entire technology chain from coal mining via coal conversion to the utilization of coal-based fuels in road transport. The analysis focuses on costs of the various options, overall economic effects, which include effects on employment and public budgets, and on environmental consequences compared to the use of liquid fuels derived from oil. Furthermore, requirements of infrastructure and other problems of the introduction of coal-based fuels as well as prospects for the export of technologies of direct and indirect coal liquefaction have been analyzed in the study. 14 figs., 10 tabs

  9. How should we assess the safety of IVF technologies?

    Science.gov (United States)

    Brison, Daniel R; Roberts, Stephen A; Kimber, Susan J

    2013-12-01

    Clinical IVF treatment was established over 30 years ago through pioneering work by Edwards and Steptoe and other teams around the world and is now considered routine treatment. However, the pace of scientific and technological advances means that IVF practitioners can now access an increasing array of new and invasive technologies. The examples are many but include: extended embryo culture, development of media to include growth factors, developments in genetic screening, use of time-lapse technology and the advent of vitrification of embryos and oocytes. In parallel, wider scientific and medical advances are raising our awareness of the potential impact of assisted reproduction technology on areas such as embryonic development, gene expression and genomic imprinting and the developmental origins of health and disease. A recently suggested paradigm for assessing new technologies in IVF includes development in animal models such as rodents and large animals, preclinical research with human gametes and embryos donated to research, prospective clinical trials in IVF and, finally, follow-up studies of IVF children. In this paper, we describe efforts to address key areas of this pathway, namely preclinical research using human gametes/embryos and long-term, follow-up studies of the health of assisted reproduction children. Copyright © 2013 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

  10. [Complex technology for water and wastewater disinfection and its industrial realization in prototype unit].

    Science.gov (United States)

    Arakcheev, E N; Brunman, V E; Brunman, M V; Konyashin, A V; Dyachenko, V A; Petkova, A P

    Usage of complex automated electrolysis unit for drinking water disinfection and wastewater oxidation and coagulation is scoped, its ecological and energy efficiency is shown. Properties of technological process of anolyte production using membrane electrolysis of brine for water disinfection in municipal pipelines and potassium ferrate production using electrochemical dissolution of iron anode in NaOH solution for usage in purification plants are listed. Construction of modules of industrial prototype for anolyte and ferrate production and applied aspects of automation of complex electrolysis unit are proved. Results of approbation of electrolytic potassium ferrate for drinking water disinfection and wastewater, rain water and environmental water oxidation and coagulation are shown.

  11. Enhancing the ecological and operational characteristics of water treatment units at TPPs based on baromembrane technologies

    Science.gov (United States)

    Chichirova, N. D.; Chichirov, A. A.; Filimonova, A. A.; Saitov, S. R.

    2017-12-01

    The innovative baromembrane technologies for water demineralization were introduced at Russian TPPs more than 25 years ago. While being used in the power engineering industry of Russia, these technologies demonstrated certain advantages over the traditional ion-exchange and thermal technologies of makeup water treatment for steam boilers. Water treatment units based on the baromembrane technology are compact, easy to operate, and highly automated. The experience gained from the use of these units shows that their reliability depends directly on preliminary water treatment. The popular water pretreatment technology with coagulation by aluminum oxychloride proved to be inefficient during the seasonal changes of source water quality that occurs at some stations. The use of aluminum coagulant at pH 8 and higher does not ensure the stable and qualitative pretreatment regime: soluble aluminum forms slip on membranes of the ultrafiltration unit, thereby causing pollution and intoxication as well as leading to structural damages or worsening of mechanical properties of the membranes. The problem of increased pH and seasonal changes of the source water quality can be solved by substitution of the traditional coagulant into a new one. To find the most successful coagulant for water pretreatment, experiments have been performed on both qualitative and quantitative analysis of the content of natural organic matters in the Volga water and their structure. We have developed a software program and measured the concentrations of soluble aluminum and iron salts at different pH values of the source water. The analysis of the obtained results has indicated that iron sulfate at pH 6.0-10.2, in contrast to aluminum oxychloride, is not characterized by increased solubility. Thus, the basic process diagrams of water pretreatment based on baromembrane technologies with pretreatment through coagulation by iron salts and wastewater amount reducing from 60-40 to 5-2% have been introduced for

  12. Phasor Measurement Unit Test and Applications for Small Signal Stability Assessment and Improvement of Power System

    DEFF Research Database (Denmark)

    Ghiga, Radu

    to be less predictable. Therefore, the methods used for stability and security assessment will most likely use information from the wide-area measurements systems (WAMS). The work presented in this thesis deals on one hand with the development of test methods and validation of phasor measurement units (PMUs......) which are considered to be one of the key technologies in WAMS, and on the other hand with the possibility of using PMU measurements together with large wind power plants (WPPs) to help improve the damping of inter area oscillations. To validate the PMUs, a laboratory test setup is assembled....... The hardware components are capable of generating, with the required accuracy, the test signals injected in the PMUs. The signals are created according to the requirements defined in the current IEEE C37.118.1-2011 standard, to test the steady-state and dynamic compliance of the PMUs. The performance...

  13. Multi-criteria assessment of community-based fluoride-removal technologies for rural Ethiopia.

    Science.gov (United States)

    Osterwalder, Lars; Johnson, C Annette; Yang, Hong; Johnston, Richard B

    2014-08-01

    Elevated concentrations of naturally-occurring fluoride in groundwater pose a serious health risk to millions of people living in the Ethiopian Rift Valley. In the absence of low-fluoride water resources of sufficient capacity, fluoride removal from drinking water is the accepted mitigation option. To date, five different community-level fluoride-removal technologies have been implemented in Ethiopia, although only a few units have been found in a functional state in the field. Which technology should be promoted and up-scaled is the subject of controversial debate amongst key stakeholders. This paper describes a multi-criteria decision analysis exercise, which was conducted with the participation of stakeholders in Ethiopia during a one-day workshop, to assess in an objective and transparent manner the available technology options. Criteria for technology comparison were selected and weighted, thus enabling the participants to assess the advantages and disadvantages of the different technologies and hear the views of other stakeholders. It was shown that there is no single most-preferable, technical solution for fluoride removal in Ethiopia. Selection of the most suitable solution depends on location-specific parameters and on the relative importance given to different criteria by the stakeholders involved. The data presented in this paper can be used as reference values for Ethiopia. © 2013. Published by Elsevier B.V. All rights reserved.

  14. Development of tritium technology for the United States magnetic fusion energy program

    International Nuclear Information System (INIS)

    Anderson, J.L.; Wilkes, W.R.

    1980-01-01

    Tritium technology development for the DOE fusion program is taking place principally at three laboratories, Mound Facility, Argonne National Laboratory and the Los Alamos Scientific Laboratory. This paper will review the major aspects of each of the three programs and look at aspects of the tritium technology being developed at other laboratories within the United States. Facilities and experiments to be discussed include the Tritium Effluent Control Laboratory and the Tritium Storage and Delivery System for the Tokamak Fusion Test Reactor at Mound Facility; the Lithium Processing Test Loop and the solid breeder blanket studies at Argonne; and the Tritium Systems Test Assembly at Los Alamos

  15. Coverage Range and Cost Comparison of Remote Antenna Unit Designs for Inbuilding Radio over Fiber Technology

    Directory of Open Access Journals (Sweden)

    Razali Ngah

    2013-09-01

    Full Text Available Future communication needs to be ubiquitous, broadband, convergent, and seamless. Radio over fiber (RoF technology is one of the most important enabler in access network for the technologies. Adoption of RoF faces bottleneck in optoelectronics, that they are still expensive, high power consumption, and limited in bandwidth. To solve the problem, transceiver in remote antenna unit (RAU is developed, i.e. electroabsorption transceiver (EAT and asymmetric FabryPerot modulator (AFPM. This paper compares their coverage range and cost in providing WCDMA and WLAN services. Needed gain of RF amplifier for supporting picocell is also discussed.

  16. National technology needs assessment for the preparation and implementation of climate change action plans

    Energy Technology Data Exchange (ETDEWEB)

    Berkel, C.W.M. van; Blonk, T.J.; Westra, C.A.

    1996-12-31

    In the United National Framework Convention on Climate Change (FCCC) it is recognised that developed countries have a responsibility in assisting developing countries and countries in economic transition in building a national capacity for the development, acquisition and transfer of Climate-related Technologies (CTs). Such assistance is most likely to be successful once it is tailored to the results of a sound assessment of the country`s development needs and once the results of this assessment have been endorsed by the most important stakeholders in the country. Recent insight in the opportunities and constraints for National (technology) Needs Assessments (NNAs) as planning tool for both capacity building and technology transfer regarding Environmentally Sound Technologies (ESTs) is applied here to propose a participatory Climate Change Action Planning (CCAP) process. This participatory planning process is thought to serve the dual objective of defining a national Climate Change Action Plan (CCAP) while at the same time contributing to the creation of a broad supportive basis for its acceptance and implementation among stakeholders in the developing country.

  17. Assessment and mapping of slope stability based on slope units: A ...

    Indian Academy of Sciences (India)

    Shallow landslide; infinite slope stability equation; return period precipitation; assessment; slope unit. ... 2010), logistic regression ... model to assess the hazard of shallow landslides ..... grating a fuzzy k-means classification and a Bayesian.

  18. The value of advanced technology in meeting 2050 greenhouse gas emissions targets in the United States

    International Nuclear Information System (INIS)

    Kyle, Page; Clarke, Leon; Pugh, Graham; Wise, Marshall; Calvin, Kate; Edmonds, James; Kim, Son

    2009-01-01

    This paper, a contribution to the EMF 22 subgroup on Transition Scenarios, examines the relationship between technology evolution over the next 40 years and the cost, energy, and greenhouse gas emissions consequences of possible U.S. mitigation goals. The paper explores these issues within the context of cumulative emissions targets based on linear reductions in CO 2 -e emissions of 50% and 80% below 1990 levels by 2050. Six technology futures were constructed within the MiniCAM integrated assessment model and then applied to the emissions targets. The paper explores the influence of technology availability and expectations of future technology availability on the economic consequences of emissions mitigation, on the time path of emissions mitigation, and on the evolution of the U.S. energy system over time. One of the strongest themes to emerge from the scenarios in this study is that near-term decision-making depends on the availability of technology decades into the future, when deep emissions reductions are required to meet the cumulative emissions goals. In the scenarios in this paper, it is the expectations about future technology that have the most dramatic effect on greenhouse gas emissions prices and emissions reductions in 2020, as opposed to near-term technology availability. Moreover, it is the nature of technology 20, 30, and 40 years out, rather than availability and deployment of technology in the next decade, that will largely determine the character of the mid-century energy system.

  19. DECISION-COMPONENTS OF NICE'S TECHNOLOGY APPRAISALS ASSESSMENT FRAMEWORK.

    Science.gov (United States)

    de Folter, Joost; Trusheim, Mark; Jonsson, Pall; Garner, Sarah

    2018-01-01

    Value assessment frameworks have gained prominence recently in the context of U.S. healthcare. Such frameworks set out a series of factors that are considered in funding decisions. The UK's National Institute of Health and Care Excellence (NICE) is an established health technology assessment (HTA) agency. We present a novel application of text analysis that characterizes NICE's Technology Appraisals in the context of the newer assessment frameworks and present the results in a visual way. A total of 243 documents of NICE's medicines guidance from 2007 to 2016 were analyzed. Text analysis was used to identify a hierarchical set of decision factors considered in the assessments. The frequency of decision factors stated in the documents was determined and their association with terms related to uncertainty. The results were incorporated into visual representations of hierarchical factors. We identified 125 decision factors, and hierarchically grouped these into eight domains: Clinical Effectiveness, Cost Effectiveness, Condition, Current Practice, Clinical Need, New Treatment, Studies, and Other Factors. Textual analysis showed all domains appeared consistently in the guidance documents. Many factors were commonly associated with terms relating to uncertainty. A series of visual representations was created. This study reveals the complexity and consistency of NICE's decision-making processes and demonstrates that cost effectiveness is not the only decision-criteria. The study highlights the importance of processes and methodology that can take both quantitative and qualitative information into account. Visualizations can help effectively communicate this complex information during the decision-making process and subsequently to stakeholders.

  20. Using Technology and Assessment to Personalize Instruction: Preventing Reading Problems.

    Science.gov (United States)

    Connor, Carol McDonald

    2017-09-15

    Children who fail to learn to read proficiently are at serious risk of referral to special education, grade retention, dropping out of high school, and entering the juvenile justice system. Accumulating research suggests that instruction regimes that rely on assessment to inform instruction are effective in improving the implementation of personalized instruction and, in turn, student learning. However, teachers find it difficult to interpret assessment results in a way that optimizes learning opportunities for all of the students in their classrooms. This article focuses on the use of language, decoding, and comprehension assessments to develop personalized plans of literacy instruction for students from kindergarten through third grade, and A2i technology designed to support teachers' use of assessment to guide instruction. Results of seven randomized controlled trials demonstrate that personalized literacy instruction is more effective than traditional instruction, and that sustained implementation of personalized literacy instruction first through third grade may prevent the development of serious reading problems. We found effect sizes from .2 to .4 per school year, which translates into about a 2-month advantage. These effects accumulated from first through third grade with a large effect size (d = .7) equivalent to a full grade-equivalent advantage on standardize tests of literacy. These results demonstrate the efficacy of technology-supported personalized data-driven literacy instruction to prevent serious reading difficulties. Implications for translational prevention research in education and healthcare are discussed.

  1. Hydroelectric power generation assessment for Russia: Cooperation in a mutual transfer of technology

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, M.F. [Harza Engineering Co., Chicago, IL (United States); Meloy, G.R. [Army Corps of Engineers, Lake Oswego, OR (United States); Semenkov, A.V. [Energopromtechnika Group Ltd., Moscow (Russian Federation)

    1995-12-31

    In September 1993, Russian Federation Prime Minister Chernomyrdin and United States Vice President Gore agreed on a joint study to examine options for Russia`s energy future. The objective of the study would be to develop a long-term, comprehensive program for the Russian power sector. A joint Russian-American program was established by the United States government. This program was charged to assess all aspects of the Russian energy sector, including conservation, thermal energy, nuclear energy, transmission line systems, and hydropower energy. The objective of the hydropower energy assessment aspect of the study was to prepare a time-phased investment plan for the period 1995 to 2000 for expansion of the existing hydroelectric energy production. The Hydropower Assessment Project required a close working relationship between engineers from the United States and the Russian Federation. The Project Team was given unprecedented access to design and economic data of existing and planned hydropower projects in the Russian Federation. This paper presents the methodology of the hydropower generation assessment for Russia, focusing on the partnering of American and Russian engineers, which led to a mutual transfer of technology and a successful project.

  2. MEGASTAR: The Meaning of Energy Growth: An Assessment of Systems, Technologies, and Requirements

    Science.gov (United States)

    1974-01-01

    A methodology for the display and analysis of postulated energy futures for the United States is presented. A systems approach that includes the methodology of technology assessment is used to examine three energy scenarios--the Westinghouse Nuclear Electric Economy, the Ford Technical Fix Base Case and a MEGASTAR generated Alternate to the Ford Technical Fix Base Case. The three scenarios represent different paths of energy consumption for the present to the year 2000. Associated with these paths are various mixes of fuels, conversion, distribution, conservation and end-use technologies. MEGASTAR presents the estimated times and unit requirements to supply the fuels, conversion and distribution systems for the postulated end uses for the three scenarios and then estimates the aggregate manpower, materials, and capital requirements needed to develop the energy system described by the particular scenario. The total requirements and the energy subsystems for each scenario are assessed for their primary impacts in the areas of society, the environment, technology and the economy.

  3. The Health Information Technology Competencies Tool: Does It Translate for Nursing Informatics in the United States?

    Science.gov (United States)

    Sipes, Carolyn; Hunter, Kathleen; McGonigle, Dee; West, Karen; Hill, Taryn; Hebda, Toni

    2017-12-01

    Information technology use in healthcare delivery mandates a prepared workforce. The initial Health Information Technology Competencies tool resulted from a 2-year transatlantic effort by experts from the US and European Union to identify approaches to develop skills and knowledge needed by healthcare workers. It was determined that competencies must be identified before strategies are established, resulting in a searchable database of more than 1000 competencies representing five domains, five skill levels, and more than 250 roles. Health Information Technology Competencies is available at no cost and supports role- or competency-based queries. Health Information Technology Competencies developers suggest its use for curriculum planning, job descriptions, and professional development.The Chamberlain College of Nursing informatics research team examined Health Information Technology Competencies for its possible application to our research and our curricular development, comparing it originally with the TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 tools, which examine informatics competencies at four levels of nursing practice. Additional analysis involved the 2015 Nursing Informatics: Scope and Standards of Practice. Informatics is a Health Information Technology Competencies domain, so clear delineation of nursing-informatics competencies was expected. Researchers found TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 differed from Health Information Technology Competencies 2016 in focus, definitions, ascribed competencies, and defined levels of expertise. When Health Information Technology Competencies 2017 was compared against the nursing informatics scope and standards, researchers found an increase in the number of informatics competencies but not to a significant degree. This is not surprising

  4. Regional Centres for Space Science and Technology Education Affiliated to the United Nations

    Science.gov (United States)

    Aquino, A. J. A.; Haubold, H. J.

    2010-05-01

    Based on resolutions of the United Nations General Assembly, Regional Centres for space science and technology education were established in India, Morocco, Nigeria, Brazil and Mexico. Simultaneously, education curricula were developed for the core disciplines of remote sensing, satellite communications, satellite meteorology, and space and atmospheric science. This paper provides a brief report on the status of the operation of the Regional Centres and draws attention to their educational activities.

  5. A comparison of the information technology knowledge of United States and German auditors

    OpenAIRE

    Greenstein-Prosch, Marilyn; McKee, Thomas E.; Quick, Reiner

    2008-01-01

    The International Federation of Accountants has stated that competence in information technology is imperative for the professional accountant due to its pervasive use in the business world. Auditors would normally be expected to have higher knowledge than the average accountant since they must audit the work of many different clients with diverse information systems. We surveyed 2,500 United States and German auditing professionals to determine their self-reported knowledge le...

  6. Technology demonstration assessment report for X-701B Holding Pond

    International Nuclear Information System (INIS)

    1992-07-01

    This Technology Demonstration Assessment Report (TDAR) was developed to evaluate and recommend the most feasible approach for cleanup of contaminated Minford soils below the X-701B Holding Pond and to summarize closure activities at the Portsmouth Gaseous Diffusion Plant (PORTS)X-701B Holding Pond(X-701B)site. In this TDAR, the recommended alternative and the activities for closure of the X-701B site are discussed. Four treatment technologies chosen for the TD, along with a contingent design, were evaluated to determine which approach would be appropriate for final closure of X-701B. These technologies address removal of soil contamination from the vadose zone and the saturated zone. The four technologies plus the Contingent Design evaluated were: In situ Soil Mixing with Solidification/Stabilization; In situ Soil Mixing with Isothermal Vapor Extraction; In situ Soil Mixing with Thermally Enhanced Vapor Extraction; In situ Soil Mixing with Peroxidation Destruction; and Contingent Closure. These technologies were evaluated according to their performance, reliability, implementability, safety, waste minimization, cost, and implementation time. Based on these criteria, a preferred treatment approach was recommended. The goal of the treatment approach is to apply the most appropriate technology demonstrated at X-231 B in order to reduce Volatile Organic Compounds (VOCs) in the saturated Minford soils directly beneath the X-701B Holding Pond. The closure schedule will include bid and award of two construction contracts, mobilization and demobilization, soil treatment, cap design, and cap construction. The total time required for soil treatment will be established based on actual performance of the soil treatment approach in the field

  7. Support for Development of Electronics and Materials Technologies by the Governments of the United States, Japan, West Germany, France, and the United Kingdom.

    Science.gov (United States)

    General Accounting Office, Washington, DC.

    The governments of the United States, Japan, West Germany, France, and the United Kingdom each have large research and development efforts involving government agencies, universities and industry. This document provides a comparative overview of policies and programs which contribute to the development of technologies in the general area of…

  8. Eielson Air Force Base Operable Unit 2 baseline risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, R.E.; Jarvis, T.T.; Jarvis, M.R.; Whelan, G.

    1994-10-01

    Operable Unit 2 at Eielson Air Force Base (AFB) near Fairbanks, is one of several operable units characterized by petroleum, oil, and lubricant contamination, and by the presence of organic products floating at the water table, as a result of Air Force operations since the 1940s. The base is approximately 19,270 acres in size, and comprises the areas for military operations and a residential neighborhood for military dependents. Within Operable Unit 2, there are seven source areas. These source areas were grouped together primarily because of the contaminants released and hence are not necessarily in geographical proximity. Source area ST10 includes a surface water body (Hardfill Lake) next to a fuel spill area. The primary constituents of concern for human health include benzene, toluene, ethylbenzene, and xylenes (BTEX). Monitored data showed these volatile constituents to be present in groundwater wells. The data also showed an elevated level of trace metals in groundwater.

  9. A Conceptual Methodology for Assessing Acquisition Requirements Robustness against Technology Uncertainties

    Science.gov (United States)

    Chou, Shuo-Ju

    2011-12-01

    In recent years the United States has shifted from a threat-based acquisition policy that developed systems for countering specific threats to a capabilities-based strategy that emphasizes the acquisition of systems that provide critical national defense capabilities. This shift in policy, in theory, allows for the creation of an "optimal force" that is robust against current and future threats regardless of the tactics and scenario involved. In broad terms, robustness can be defined as the insensitivity of an outcome to "noise" or non-controlled variables. Within this context, the outcome is the successful achievement of defense strategies and the noise variables are tactics and scenarios that will be associated with current and future enemies. Unfortunately, a lack of system capability, budget, and schedule robustness against technology performance and development uncertainties has led to major setbacks in recent acquisition programs. This lack of robustness stems from the fact that immature technologies have uncertainties in their expected performance, development cost, and schedule that cause to variations in system effectiveness and program development budget and schedule requirements. Unfortunately, the Technology Readiness Assessment process currently used by acquisition program managers and decision-makers to measure technology uncertainty during critical program decision junctions does not adequately capture the impact of technology performance and development uncertainty on program capability and development metrics. The Technology Readiness Level metric employed by the TRA to describe program technology elements uncertainties can only provide a qualitative and non-descript estimation of the technology uncertainties. In order to assess program robustness, specifically requirements robustness, against technology performance and development uncertainties, a new process is needed. This process should provide acquisition program managers and decision

  10. Tackling ethical issues in health technology assessment: a proposed framework.

    Science.gov (United States)

    Burls, Amanda; Caron, Lorraine; Cleret de Langavant, Ghislaine; Dondorp, Wybo; Harstall, Christa; Pathak-Sen, Ela; Hofmann, Bjørn

    2011-07-01

    Values are intrinsic to the use of health technology assessments (HTAs) in health policy, but neglecting value assumptions in HTA makes their results appear more robust or normatively neutral than may be the case. Results of a 2003 survey by the International Network of Agencies for Health Technology Assessment (INAHTA) revealed the existence of disparate methods for making values and ethical issues explicit when conducting HTA. An Ethics Working Group, with representation from sixteen agencies, was established to develop a framework for addressing ethical issues in HTA. Using an iterative approach, with email exchanges and face-to-face workshops, a report on Handling Ethical Issues was produced. This study describes the development process and the agreed upon framework for reflexive ethical analysis that aims to uncover and explore the ethical implications of technologies through an integrated, context-sensitive approach and situates the proposed framework within previous work in the development of ethics analysis in HTA. It is important that methodological approaches to address ethical reflection in HTA be integrative and context sensitive. The question-based approach described and recommended here is meant to elicit this type of reflection in a way that can be used by HTA agencies. The questions proposed are considered only as a starting point for handling ethics issues, but their use would represent a significant improvement over much of the existing practice.

  11. Life cycle assessment of products and technologies. LCA Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Koukkari, H.; Nors, M. (eds.)

    2009-12-15

    VTT Technical Research Centre of Finland organised a Symposium 'Life Cycle Assessment of Products and Technologies' on the 6th of October, 2009. The Symposium gave a good overview of methods, tools and applications of Life Cycle Assessment developed and utilised in several technology fields of VTT. The 12 Symposium papers deal with recent LCA studies on products and technologies. The scope ranges from beverage cups to urban planning, from inventory databases to rating systems. Topical issues relating to climate change concern biorefineries and the overall impacts of the utilisation of biomass. The calculation of carbon footprints is also introduced through paper products and magazines. One example of LCA tools developed at VTT addresses cement manufacturing. VTT's transport emission database, LIPASTO, was introduced in detail. The use of LCA methods and life cycle thinking is described in various contexts: product development in relation to precision instruments; selection of materials and work processes in relation to sediment remediation project; and procedures of sustainability rating through VTT's office building Digitalo. The Climate Bonus project presented a demonstrated ICT support that informs about the greenhouse gas emissions and carbon footprints of households. (orig.)

  12. An ethical assessment model for digital disease detection technologies.

    Science.gov (United States)

    Denecke, Kerstin

    2017-09-20

    Digital epidemiology, also referred to as digital disease detection (DDD), successfully provided methods and strategies for using information technology to support infectious disease monitoring and surveillance or understand attitudes and concerns about infectious diseases. However, Internet-based research and social media usage in epidemiology and healthcare pose new technical, functional and formal challenges. The focus of this paper is on the ethical issues to be considered when integrating digital epidemiology with existing practices. Taking existing ethical guidelines and the results from the EU project M-Eco and SORMAS as starting point, we develop an ethical assessment model aiming at providing support in identifying relevant ethical concerns in future DDD projects. The assessment model has four dimensions: user, application area, data source and methodology. The model supports in becoming aware, identifying and describing the ethical dimensions of DDD technology or use case and in identifying the ethical issues on the technology use from different perspectives. It can be applied in an interdisciplinary meeting to collect different viewpoints on a DDD system even before the implementation starts and aims at triggering discussions and finding solutions for risks that might not be acceptable even in the development phase. From the answers, ethical issues concerning confidence, privacy, data and patient security or justice may be judged and weighted.

  13. Gender in health technology assessment: pilot study on agency approaches.

    Science.gov (United States)

    Panteli, Dimitra; Zentner, Annette; Storz-Pfennig, Philipp; Busse, Reinhard

    2011-07-01

    Gender as a social construct is a recognized health determinant. Because best practice in reporting health technology assessment (HTA) clearly specifies the need to appraise a technology's social impact within the target population, the extent to which gender issues are taken into account in HTA production is of interest, not only in light of equitable practices but also for reasons of effectiveness. The aim of this study is to provide a first assessment of the degree of gender sensitivity shown by HTA agencies around the world today. The Web sites of sixty HTA agencies were analyzed. The consideration of gender aspects was specifically looked for in each agency's general mission statement, its priority setting process, and its methodological approach. Additionally, specific gender-oriented initiatives not belonging to any of the aforementioned categories were identified. Of the sixty agencies, less than half mention a commitment to addressing the social implication of health technologies. Only fifteen institutions make information on their priority setting principles available on their Web sites and gender was an issue in two of those cases. Data on methodology were obtainable online from 18 agencies, two of which mentioned gender issues explicitly. Finally, gender-oriented initiatives were identified by thirteen agencies. A gender-sensitive approach is apparently rarely adopted in current HTA production. Exceptional practices and relevant tools do exist and could serve as examples to be promoted by international collaborative networks.

  14. Connected Classroom Technology Facilitates Multiple Components of Formative Assessment Practice

    Science.gov (United States)

    Shirley, Melissa L.; Irving, Karen E.

    2015-02-01

    Formative assessment has been demonstrated to result in increased student achievement across a variety of educational contexts. When using formative assessment strategies, teachers engage students in instructional tasks that allow the teacher to uncover levels of student understanding so that the teacher may change instruction accordingly. Tools that support the implementation of formative assessment strategies are therefore likely to enhance student achievement. Connected classroom technologies (CCTs) include a family of devices that show promise in facilitating formative assessment. By promoting the use of interactive student tasks and providing both teachers and students with rapid and accurate data on student learning, CCT can provide teachers with necessary evidence for making instructional decisions about subsequent lessons. In this study, the experiences of four middle and high school science teachers in their first year of implementing the TI-Navigator™ system, a specific type of CCT, are used to characterize the ways in which CCT supports the goals of effective formative assessment. We present excerpts of participant interviews to demonstrate the alignment of CCT with several main phases of the formative assessment process. CCT was found to support implementation of a variety of instructional tasks that generate evidence of student learning for the teacher. The rapid aggregation and display of student learning evidence provided teachers with robust data on which to base subsequent instructional decisions.

  15. Regional characteristics of individual housing units in Serbia from the aspect of applied building technologies

    Directory of Open Access Journals (Sweden)

    Jovanović-Popović Milica

    2014-01-01

    Full Text Available Individual housing units in Serbia have been studied from the aspect of applied technical solutions. Analyzed data have been collected during a field research in accordance with the current administrative regional division, and they represent a basis for definition of regional typology of individual housing units. Characteristic types of objects of each region’s typology have been further analyzed. Upon these analyses regional characteristics of individual housing units regarding applied construction types, building technologies and materials have been defined and presented. [Projekat Ministarstva nauke Republike Srbije, br. TR 36034: Investigation and Systematization of Serbian Housing in Context of Globalization and European Integration in the Framework of Quality and Living-Standard Improvement

  16. Environmental assessment of digestate treatment technologies using LCA methodology.

    Science.gov (United States)

    Vázquez-Rowe, Ian; Golkowska, Katarzyna; Lebuf, Viooltje; Vaneeckhaute, Céline; Michels, Evi; Meers, Erik; Benetto, Enrico; Koster, Daniel

    2015-09-01

    The production of biogas from energy crops, organic waste and manure has augmented considerably the amounts of digestate available in Flanders. This has pushed authorities to steadily introduce legislative changes to promote its use as a fertilising agent. There is limited arable land in Flanders, which entails that digestate has to compete with animal manure to be spread. This forces many anaerobic digestion plants to further treat digestate in such a way that it can either be exported or the nitrogen be removed. Nevertheless, the environmental impact of these treatment options is still widely unknown, as well as the influence of these impacts on the sustainability of Flemish anaerobic digestion plants in comparison to other regions where spreading of raw digestate is allowed. Despite important economic aspects that must be considered, the use of Life Cycle Assessment (LCA) is suggested in this study to identify the environmental impacts of spreading digestate directly as compared to four different treatment technologies. Results suggest relevant environmental gains when the digestate mix is treated using the examined conversion technologies prior to spreading, although important trade-offs between impact categories were observed and discussed. The promising results of digestate conversion technologies suggest that further LCA analyses should be performed to delve into, for instance, the appropriateness to shift to nutrient recovery technologies rather than digestate conversion treatments. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. [Review of the health technology assessment on surgeries in Japan].

    Science.gov (United States)

    Nishigori, Tatsuto; Kawakami, Koji; Goto, Rei; Hida, Koya; Sakai, Yoshiharu

    2015-01-01

    Health Technology Assessment (HTA) is the systematic evaluation to measure the value of new health technologies. It improves the quality of choices on hand for cost-effective health technologies that are considered valuable. Japan has built a society of longevity consisted of the institution of the universal health care system, which is financially unsustainable. In Japan, no independent HTA organization has been publicly established but the government is contemplating implementation of such system. To advance the usage of HTA into surgery, we need to establish methods for evaluating new surgical technologies with steep learning curves. The promotion of clinical researches is also essential, especially by taking advantage of observational studies from medical big data such as the Japanese nationwide database which has more than four million surgical cases registered. In addition, we need more clinical information regarding each surgical patient's quality of life and socioeconomic status. The countries already introduced HTA into their health care system have measures to solve the problems that arose and have developed necessary evaluating methods. To introduce and promote HTA in Japan without taking away the benefit of our current healthcare, it is required that surgeons collaborate with other specialists such as methodologists and health economists.

  18. Assessment of pollution prevention and control technology for plating operations

    Science.gov (United States)

    Chalmer, Paul D.; Sonntag, William A.; Cushnie, George C., Jr.

    1995-01-01

    The National Center for Manufacturing Sciences (NCMS) is sponsoring an on-going project to assess pollution prevention and control technology available to the plating industry and to make this information available to those who can benefit from it. Completed project activities include extensive surveys of the plating industry and vendors of technologies and an indepth literature review. The plating industry survey was performed in cooperation with the National Association of Metal Finishers. The contractor that conducted the surveys and prepared the project products was CAI Engineering. The initial products of the project were made available in April, 1994. These products include an extensive report that presents the results of the surveys and literature review and an electronic database. The project results are useful for all those associated with pollution prevention and control in the plating industry. The results show which treatment, recovery and bath maintenance technologies have been most successful for different plating processes and the costs for purchasing and operating these technologies. The project results also cover trends in chemical substitution, the identification of compliance-problem pollutants, sludge generation rates, off-site sludge recovery and disposal options, and many other pertinent topics.

  19. [Diagnosis and the technology for optimizing the medical support of a troop unit].

    Science.gov (United States)

    Korshever, N G; Polkovov, S V; Lavrinenko, O V; Krupnov, P A; Anastasov, K N

    2000-05-01

    The work is devoted to investigation of the system of military unit medical support with the use of principles and states of organizational diagnosis; development of the method allowing to assess its functional activity; and determination of optimization trends. Basing on the conducted organizational diagnosis and expert inquiry the informative criteria were determined which characterize the stages of functioning of the military unit medical support system. To evaluate the success of military unit medical support the complex multi-criteria pattern was developed and algorithm of this process optimization was substantiated. Using the results obtained, particularly realization of principles and states of decision taking theory in machine program it is possible to solve more complex problem of comparison between any number of military units: to dispose them according to priority decrease; to select the programmed number of the best and worst; to determine the trends of activity optimization in corresponding medical service personnel.

  20. Sustainability Assessment Using a Unit-based Sustainability ...

    African Journals Online (AJOL)

    need to balance economic growth and social progress with environmental concerns ... They play a special role in seeking solutions to societal ... development, and also helps to establish the current status of sustainability work in progress. .... departments, units and/or facets of university life (e.g. student activities or estates ...

  1. The radioactive waste debate in the United States and nuclear technology for peaceful purposes

    Science.gov (United States)

    Tehan, Terrence Norbert

    Many ethical, cultural, and economic concerns have accompanied the rapid growth of Western technology. Nuclear technology in particular has experienced considerable opposition because of its perceived dangers, especially disposal of atomic waste. While this field of science remains in its infancy, many legal, political and ecological groups oppose any further application of nuclear technology--including the significant medical, environmental, and economic benefits possible from a safe and responsible application of nuclear energy. Complete and objective knowledge of this technology is needed to balance a healthy respect for the danger of atomic power with its many advantages. This study focuses on one aspect of nuclear technology that has particularly aroused political and social controversy: nuclear waste. Finding ways of disposing safely of nuclear waste has become an extremely volatile issue because of the popular misconception that there is no permanent solution to this problem. This investigation will demonstrate that the supposedly enduring waste problem has been resolved in several industrial countries that now outstrip the United States in safe commercial applications of nuclear science. This dissertation offers a reasoned and objective contribution to the continuing national debate on the peaceful uses of nuclear technology. This debate becomes more crucial as the nation seeks a dependable substitute for the non-renewable sources of energy now rapidly being exhausted.

  2. ALTERNATIVE REMEDIATION TECHNOLOGY STUDY FOR GROUNDWATER TREATMENT AT 200-PO-1 OPERABLE UNIT AT HANFORD SITE

    Energy Technology Data Exchange (ETDEWEB)

    DADO MA

    2008-07-31

    This study focuses on the remediation methods and technologies applicable for use at 200-PO-I Groundwater Operable Unit (OU) at the Hanford Site. The 200-PO-I Groundwater au requires groundwater remediation because of the existence of contaminants of potential concern (COPC). A screening was conducted on alternative technologies and methods of remediation to determine which show the most potential for remediation of groundwater contaminants. The possible technologies were screened to determine which would be suggested for further study and which were not applicable for groundwater remediation. COPCs determined by the Hanford Site groundwater monitoring were grouped into categories based on properties linking them by remediation methods applicable to each COPC group. The screening considered the following criteria. (1) Determine if the suggested method or technology can be used for the specific contaminants found in groundwater and if the technology can be applied at the 200-PO-I Groundwater au, based on physical characteristics such as geology and depth to groundwater. (2) Evaluate screened technologies based on testing and development stages, effectiveness, implementability, cost, and time. This report documents the results of an intern research project conducted by Mathew Dado for Central Plateau Remediation in the Soil and Groundwater Remediation Project. The study was conducted under the technical supervision of Gloria Cummins and management supervision of Theresa Bergman and Becky Austin.

  3. Design and Test Plans for a Non-Nuclear Fission Power System Technology Demonstration Unit

    Science.gov (United States)

    Mason, Lee; Palac, Donald; Gibson, Marc; Houts, Michael; Warren, John; Werner, James; Poston, David; Qualls, Arthur Lou; Radel, Ross; Harlow, Scott

    2012-01-01

    A joint National Aeronautics and Space Administration (NASA) and Department of Energy (DOE) team is developing concepts and technologies for affordable nuclear Fission Power Systems (FPSs) to support future exploration missions. A key deliverable is the Technology Demonstration Unit (TDU). The TDU will assemble the major elements of a notional FPS with a non-nuclear reactor simulator (Rx Sim) and demonstrate system-level performance in thermal vacuum. The Rx Sim includes an electrical resistance heat source and a liquid metal heat transport loop that simulates the reactor thermal interface and expected dynamic response. A power conversion unit (PCU) generates electric power utilizing the liquid metal heat source and rejects waste heat to a heat rejection system (HRS). The HRS includes a pumped water heat removal loop coupled to radiator panels suspended in the thermal-vacuum facility. The basic test plan is to subject the system to realistic operating conditions and gather data to evaluate performance sensitivity, control stability, and response characteristics. Upon completion of the testing, the technology is expected to satisfy the requirements for Technology Readiness Level 6 (System Demonstration in an Operational and Relevant Environment) based on the use of high-fidelity hardware and prototypic software tested under realistic conditions and correlated with analytical predictions.

  4. A Framework for Assessment of Aviation Safety Technology Portfolios

    Science.gov (United States)

    Jones, Sharon M.; Reveley, Mary S.

    2014-01-01

    The programs within NASA's Aeronautics Research Mission Directorate (ARMD) conduct research and development to improve the national air transportation system so that Americans can travel as safely as possible. NASA aviation safety systems analysis personnel support various levels of ARMD management in their fulfillment of system analysis and technology prioritization as defined in the agency's program and project requirements. This paper provides a framework for the assessment of aviation safety research and technology portfolios that includes metrics such as projected impact on current and future safety, technical development risk and implementation risk. The paper also contains methods for presenting portfolio analysis and aviation safety Bayesian Belief Network (BBN) output results to management using bubble charts and quantitative decision analysis techniques.

  5. Can we reliably benchmark health technology assessment organizations?

    Science.gov (United States)

    Drummond, Michael; Neumann, Peter; Jönsson, Bengt; Luce, Bryan; Schwartz, J Sanford; Siebert, Uwe; Sullivan, Sean D

    2012-04-01

    In recent years, there has been growth in the use of health technology assessment (HTA) for making decisions about the reimbursement, coverage, or guidance on the use of health technologies. Given this greater emphasis on the use of HTA, it is important to develop standards of good practice and to benchmark the various HTA organizations against these standards. This study discusses the conceptual and methodological challenges associated with benchmarking HTA organizations and proposes a series of audit questions based on a previously published set of principles of good practice. It is concluded that a benchmarking exercise would be feasible and useful, although the question of who should do the benchmarking requires further discussion. Key issues for further research are the alternative methods for weighting the various principles and for generating an overall score, or summary statement of adherence to the principles. Any weighting system, if developed, would need to be explored in different jurisdictions to assess the extent to which the relative importance of the principles is perceived to vary. Finally, the development and precise wording of the audit questions requires further study, with a view to making the questions as unambiguous as possible, and the reproducibility of the assessments as high as possible.

  6. Regulatory and Radiological Assessment of Co-60 Teletherapy Unit ...

    African Journals Online (AJOL)

    Journal of Applied Science and Technology ... of personnel monitoring, operating and emergency procedures up to waste management provision and the definition of responsibilities of staff and their training ... Personnel Monitoring reports on four (4) staff members were also compared with calculated and measured results.

  7. The United States National Climate Assessment - Alaska Technical Regional Report

    Science.gov (United States)

    Markon, Carl J.; Trainor, Sarah F.; Chapin, F. Stuart; Markon, Carl J.; Trainor, Sarah F.; Chapin, F. Stuart

    2012-01-01

    The Alaskan landscape is changing, both in terms of effects of human activities as a consequence of increased population, social and economic development and their effects on the local and broad landscape; and those effects that accompany naturally occurring hazards such as volcanic eruptions, earthquakes, and tsunamis. Some of the most prevalent changes, however, are those resulting from a changing climate, with both near term and potential upcoming effects expected to continue into the future. Alaska's average annual statewide temperatures have increased by nearly 4°F from 1949 to 2005, with significant spatial variability due to the large latitudinal and longitudinal expanse of the State. Increases in mean annual temperature have been greatest in the interior region, and smallest in the State's southwest coastal regions. In general, however, trends point toward increases in both minimum temperatures, and in fewer extreme cold days. Trends in precipitation are somewhat similar to those in temperature, but with more variability. On the whole, Alaska saw a 10-percent increase in precipitation from 1949 to 2005, with the greatest increases recorded in winter. The National Climate Assessment has designated two well-established scenarios developed by the Intergovernmental Panel on Climate Change (Nakicenovic and others, 2001) as a minimum set that technical and author teams considered as context in preparing portions of this assessment. These two scenarios are referred to as the Special Report on Emissions Scenarios A2 and B1 scenarios, which assume either a continuation of recent trends in fossil fuel use (A2) or a vigorous global effort to reduce fossil fuel use (B1). Temperature increases from 4 to 22°F are predicted (to 2070-2099) depending on which emissions scenario (A2 or B1) is used with the least warming in southeast Alaska and the greatest in the northwest. Concomitant with temperature changes, by the end of the 21st century the growing season is expected

  8. Environmental assessment of solid waste landfilling technologies by means of LCA-modeling

    DEFF Research Database (Denmark)

    Manfredi, Simone; Christensen, Thomas Højlund

    2009-01-01

    By using life cycle assessment (LCA) modeling, this paper compares the environmental performance of six landfilling technologies (open dump, conventional landfill with flares, conventional landfill with energy recovery, standard bioreactor landfill, flushing bioreactor landfill and semi......-aerobic landfill) and assesses the influence of the active operations practiced on these performances. The environmental assessments have been performed by means of the LCA-based tool EASEWASTE, whereby the functional unit utilized for the LCA is “landfilling of 1 ton of wet household waste in a 10 m deep landfill...... that it is crucially important to ensure the highest collection efficiency of landfill gas and leachate since a poor capture compromises the overall environmental performance. Once gas and leachate are collected and treated, the potential impacts in the standard environmental categories and on spoiled groundwater...

  9. Environmental Impact Assessment for Olkiluoto 4 Nuclear Power Plant Unit in Finland

    International Nuclear Information System (INIS)

    Dersten, Riitta; Gahmberg, Sini; Takala, Jenni

    2008-01-01

    In order to improve its readiness for constructing additional production capacity, Teollisuuden Voima Oyj (TVO) initiated in spring 2007 the environmental impact assessment procedure (EIA procedure) concerning a new nuclear power plant unit that would possibly be located at Olkiluoto. When assessing the environmental impacts of the Olkiluoto nuclear power plant extension project, the present state of the environment was first examined, and after that, the changes caused by the projects as well as their significance were assessed, taking into account the combined impacts of the operations at Olkiluoto. The environmental impact assessment for the planned nuclear power plant unit covers the entire life cycle of the plant unit. (authors)

  10. Environmental Impact Assessment for Olkiluoto 4 Nuclear Power Plant Unit in Finland

    Energy Technology Data Exchange (ETDEWEB)

    Dersten, Riitta; Gahmberg, Sini; Takala, Jenni [Teollisuuden Voima Oyj, Olkiluoto, FI-27160 Eurajoki (Finland)

    2008-07-01

    In order to improve its readiness for constructing additional production capacity, Teollisuuden Voima Oyj (TVO) initiated in spring 2007 the environmental impact assessment procedure (EIA procedure) concerning a new nuclear power plant unit that would possibly be located at Olkiluoto. When assessing the environmental impacts of the Olkiluoto nuclear power plant extension project, the present state of the environment was first examined, and after that, the changes caused by the projects as well as their significance were assessed, taking into account the combined impacts of the operations at Olkiluoto. The environmental impact assessment for the planned nuclear power plant unit covers the entire life cycle of the plant unit. (authors)

  11. [Medico-economic assessment of the Pontoise Hospital stroke unit].

    Science.gov (United States)

    Yekhlef, F; Decup, D; Niclot, P; Servan, J; Descombes, S; Richecoeur, J; Ollivier, A

    2010-11-01

    Annually, approximately 120,000 people in France have a stroke. Various controlled studies have pointed out the benefits of treatment in a stroke unit (SU). The objective of this study was to evaluate, from a medical point of view, the economic impact of the Pontoise Hospital SU. Based on the national cost study (NCS [étude nationale des coûts: ENC]) we analyzed data of five diagnosis related groups (DRG) which have a principle diagnosis in relation with stroke. This work was limited to strokes and transient ischemic events in adults and excluded sub-arachnoid hemorrhage. Medical and economic parameters were collected over the period from January to October 2006 and compared with those of the same period in 2005, that is to say before the opening of the SU. Three hundred and twenty-three hospital stays occurred between January 1st and October 31st, 2006 and 216 during the same time period before the opening of the SU, an increase of approximately 50% of all stroke-related admissions in our hospital. The number of stays carried out in the neurology unit increased by 29%. There was no significant difference between the two periods regarding age (median 69 versus 70 years) and sex- ratio. Average length of stay (ALS) was the same (9 days). There were no significant differences concerning the death rate (5.6% versus 6.2%) and that of discharge to home (44.6% versus 44.4%). The cost by stay in 2006 was 3534 euros [median; min 664-max 57,542] versus 3541 euros in 2005 [681-35,149] (p=0.57). Analysis by DRG highlighted an increase in the cost for serious strokes, cerebral infarctions and hemorrhages. For transitory ischemic events, the cost and the ALS decreased. After the opening of the SU, there was an increase in the activity without an increase in the total cost. This could be related in part to the limited means allocated to the stroke unit at its opening (in particular medical staff). The NCS can be used to evaluate the activity of a stroke unit. This work could

  12. Advances in multi-unit nuclear power plant probabilistic risk assessment

    International Nuclear Information System (INIS)

    Modarres, Mohammad; Zhou, Taotao; Massoud, Mahmoud

    2017-01-01

    The Fukushima Dai-ichi accident highlighted the importance of risks from multiple nuclear reactor unit accidents at a site. As a result, there has been considerable interest in Multi-Unit Probabilistic Risk Assessment (MUPRA) in the past few years. For considerations in nuclear safety, the MUPRA estimates measures of risk and identifies contributors to risk representing the entire site rather than the individual units in the site. In doing so, possible unit-to-unit interactions and dependencies should be modeled and accounted for in the MUPRA. In order to effectively account for these risks, six main commonality classifications—initiating events, shared connections, identical components, proximity dependencies, human dependencies, and organizational dependencies—may be used. This paper examines advances in MUPRA, offers formal definitions of multi-unit site risk measures and proposes quantitative approaches and data to account for unit-to-unit dependencies. Finally, a parametric approach for the multi-unit dependencies has been discussed and a simple example illustrates application of the proposed methodology. - Highlights: • This paper will discuss the technical aspects of an integrated MUPRA, including consideration of dependencies and assessment of the multi-unit dependency data and models for quantifying such dependencies. • The paper also provides discussions on formal definitions and metrics for multi-unit site risks. • The parametric methods are used to address multi-unit dependency situations. • A conceptual two-unit logic example is used to demonstrate the application of proposed methodology.

  13. IMPLEMENTING HEALTH TECHNOLOGY ASSESSMENT-BASED RECOMMENDATIONS IN FINLAND

    DEFF Research Database (Denmark)

    Sihvo, Sinikka; Ikonen, Tuija; Mäkelä, Marjukka

    2017-01-01

    Objectives: The Managed Uptake of Medical Methods Program (MUMM) started 10 years ago as a joint venture of the Finnish Office for Health Technology Assessment (Finohta) and the twenty hospital districts in Finland. The aim is to offer information on the effectiveness, safety, organizational...... in decision making. Conclusions: HTA-based MUMM recommendations were well received by physicians but in practice they are less used than clinical practice guidelines. Short-form electronic surveys were a useful way of gathering information about awareness and implementation. The surveys also functioned...... as another method of informing key physicians about the recommendations....

  14. Life cycle assessment of nanoadsorbents at early stage technological development

    DEFF Research Database (Denmark)

    Kazemi, Ali; Bahramifar, Nader; Heydari, Akbar

    2018-01-01

    the process of the functionalization of nanoadsorbents leads to the increase of the adsorption capacity of nanoadsorbents, it is also paired with a significant enhancement of negative environmental impacts. The results of t-test comparing the cradle-to-use life cycle impacts of studied impact categories for 1...... in the control and removal of environmental pollutants. This application is still an emerging technology at the early stages of development. Hence, the heart of this study enables an environmental assessment of nanoadsorbents as an emerging product. In addition, the environmental impacts of synthesized...

  15. Fusion research as a subject of parliamentary technology assessment

    International Nuclear Information System (INIS)

    Gruenwald, R.; Grunwald, A.; Oertel, D.

    2004-01-01

    Fusion research is an internationally interlaced precautionary activity in the public interest and with public support. Parliamentary technology assessment serves to consult parliament in upcoming opinion- and decision-making processes.The task in this case is to give a comprehensible account of the status of development, to consider the different impacts and consequences of fusion, and to provide options for actions by parliament. The major methodological challenge consists in dealing with the uncertainty of knowledge in view of the long time scales involved. (orig.)

  16. Oklahoma State University proposed Advanced Technology Research Center. Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The Department of Energy (DOE) has prepared an Environmental Assessment (EA) evaluating the construction and equipping of the proposed Advanced Technology Research Center (ATRC) at Oklahoma State University (OSU) in Stillwater, Oklahoma. Based on the analysis in the EA, the DOE has determined that the proposed action does not constitute a major federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement is not required.

  17. Technology assessment and the Food and Drug Administration

    Science.gov (United States)

    Kaplan, A. H.; Becker, R. H.

    1972-01-01

    The statutory standards underlying the activities of the FDA, and the problems the Agency faces in decision making are discussed from a legal point of view. The premarketing clearance of new drugs and of food additives, the two most publicized and criticized areas of FDA activity, are used as illustrations. The importance of statutory standards in technology assessment in a regulatory setting is developed. The difficulties inherent in the formulation of meaningful standards are recognized. For foods, the words of the statute are inadequate, and for drugs, a statutory recognition of the various other objectives would be useful to the regulator and the regulated.

  18. Assessment of financial expenditure for Rivne NPP power units decommissioning

    International Nuclear Information System (INIS)

    Nosovskij, A.V.; Salij, L.M.

    2007-01-01

    The article covers some financial aspects of developing a decommissioning concept for Rivne NPP power units with reactor VVER-440 and VVER-1000. Possible methodological approaches to costs estimate have been analyzed. Preliminary results of cost estimation are presented for two decommissioning options: deferred and immediate dismantling. Principally possible options for accumulating assets have been analyzed to finance measures related to Rivne NPP decommissioning. A mathematical model has been proposed for creating decommissioning financial reserve

  19. Research on Key Technologies of Unit-Based CNC Machine Tool Assembly Design

    Directory of Open Access Journals (Sweden)

    Zhongqi Sheng

    2014-01-01

    Full Text Available Assembly is the part that produces the maximum workload and consumed time during product design and manufacturing process. CNC machine tool is the key basic equipment in manufacturing industry and research on assembly design technologies of CNC machine tool has theoretical significance and practical value. This study established a simplified ASRG for CNC machine tool. The connection between parts, semantic information of transmission, and geometric constraint information were quantified to assembly connection strength to depict the assembling difficulty level. The transmissibility based on trust relationship was applied on the assembly connection strength. Assembly unit partition based on assembly connection strength was conducted, and interferential assembly units were identified and revised. The assembly sequence planning and optimization of parts in each assembly unit and between assembly units was conducted using genetic algorithm. With certain type of high speed CNC turning center, as an example, this paper explored into the assembly modeling, assembly unit partition, and assembly sequence planning and optimization and realized the optimized assembly sequence of headstock of CNC machine tool.

  20. Roadmap Modeling and Assessment Approach for Defense Technology System of Systems

    Directory of Open Access Journals (Sweden)

    Hui Lu

    2018-06-01

    Full Text Available Advanced defense technology plays a crucial role in safeguarding national safety and development interests. Aiming to handle the problems of current research and development (R&D management approaches faced with the rocketing complexities of system of systems, the authors propose a novel roadmap modeling and assessment methodology through studying the driving forces of general technology development and analyzing realistic requirements of defense technology management in this article. First, a requirement decomposition framework is designed based on multi-view theories and text-mining tools are used to construct a multi-layer knowledge-flow network model. Second, the contribution rates of requirement elements at different levels are evaluated using a multi-criteria decision-making approach and the node importance is assessed based on the topological structure of multi-layer network. Third, it is utilized to demonstrate the effectiveness of the proposed approaches that illustrative examples of the technology requirements in maritime security strategy investigating and a dual-layer knowledge-flow network consists of patents that belong to the “Coherent Light Generator (CLC” classification from the United States Patent and Trademark Office (USPTO database and the related academic papers from Web of Science. Finally, the contributions, potential applications, and drawbacks of this work are discussed and research outlooks are provided.

  1. Waiting for Disasters: A Risk Reduction Assessment of Technological Disasters

    Science.gov (United States)

    Rovins, Jane; Winningham, Sam

    2010-05-01

    This session provides a risk reduction/mitigation assessment of natural hazards causation of technological disasters and possible solution. People use technology in an attempt to not only control their environment but nature itself in order to make them feel safe and productive. Most strategies for managing hazards followed a traditional planning model i.e. study the problem, identify and implement a solution, and move on to the next problem. This approach is often viewed as static model and risk reduction is more of an upward, positive, linear trend. However, technological disasters do not allow risk reduction action to neatly fit this upward, positive, linear trend with actual or potential threats to the environment and society. There are different types of technological disasters, including industrial accidents; pipeline ruptures; accidents at power, water and heat supply systems and other lines of communication; sudden collapse of buildings and mines; air crashes; shipwrecks; automobile and railway accidents to name a few. Natural factors can play an essential role in triggering or magnifying technological disasters. They can result from the direct destruction of given technical objects by a hazardous natural process such as the destruction of an atomic power plant or chemical plant due to an earthquake. Other examples would include the destruction of communications or infrastructure systems by heavy snowfalls, strong winds, avalanches. Events in the past ten years clearly demonstrate that natural disasters and the technological disasters that accompany them are not problems that can be solved in isolation and risk reduction can play an important part. Risk reduction was designed to head off the continuing rising financial and structural tolls from disasters. All Hazard Risk Reduction planning was supposed to include not only natural, but technological, and human-made disasters as well. The subsequent disaster risk reduction (DRR) indicators were to provide the

  2. UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2008

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S.

    2009-11-05

    The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

  3. United States Department Of Energy Office Of Environmental Management Waste Processing Annual Technology Development Report 2008

    International Nuclear Information System (INIS)

    Bush, S.

    2009-01-01

    The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

  4. Technology Assessment for Powertrain Components Final Report CRADA No. TC-1124-95

    Energy Technology Data Exchange (ETDEWEB)

    Tokarz, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gough, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-10-19

    LLNL utilized its defense technology assessment methodologies in combination with its capabilities in the energy; manufacturing, and transportation technologies to demonstrate a methodology that synthesized available but incomplete information on advanced automotive technologies into a comprehensive framework.

  5. Simulation Technology Laboratory Building 970 hazards assessment document

    International Nuclear Information System (INIS)

    Wood, C.L.; Starr, M.D.

    1994-11-01

    The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Simulation Technology Laboratory, Building 970. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distances at which a postulated facility event will produce consequences exceeding the ERPG-2 and Early Severe Health Effects thresholds are 78 and 46 meters, respectively. The highest emergency classification is a Site Area Emergency. The Emergency Planning Zone is 100 meters

  6. A model for assessing social impacts of nuclear technology

    International Nuclear Information System (INIS)

    Suzuki, Atsuyuki; Kiyose, Ryohei

    1981-01-01

    A theoretical framework is given for assessing the social or environmental impacts of nuclear technology. A two-act problem concerning the incentive-penalty system is supposed to formulate the principle of ALAP. An observation plan to make decision on the problem is optimized with the Bayseian decision theory. The optimized solution resting on the amount of incentive or penalty is compared with an actual or practical plan. Then, by finding the indifference between the two plans, an impact is assessed in monetary terms. As regards the third step, the model does not provide the details since it is beyond the scope of the description. If there exists an actual plan, it can be easily compared with the results from this theory. If there does not or in the process of making it, its feasibility must be studied by another model or by different approaches. (J.P.N.)

  7. STAKEHOLDERS' PERCEPTIONS OF HEALTH TECHNOLOGY ASSESSMENT IN TURKEY.

    Science.gov (United States)

    Ozturk, Kirstin; Karadayı, Bilgehan; Şener, Olgun

    2018-01-01

    In April of 2014, the Turkish Ministry of Health held the First Annual Health Technology Assessment (HTA) Meeting in Antalya. The objectives were to understand the perceptions of stakeholders regarding the current status of HTA and document their recommendations and strategies for promoting systematic use of HTA in Turkey. The study was conducted using a qualitative written survey assessing current compliance with the fifteen HTA principles suggested by Drummond et al. (Key principles for the improved conduct of health technology assessments for resource allocation decision. Int J Technol Assess Health Care. 2008;24:244-258) and a qualitative method referred to as the Collective Intelligence Platform®. A total of 216 stakeholders representing academic, public, and the private health sector attended the annual meeting; 178 completed the survey and 183 participated in the Platform. Quantitative Results: Survey participants reported that, although Turkey does not currently fully comply with any of the fifteen HTA principles, there is some compliance with all of them. The overall average score for all fifteen principles was 3.04. Quantitivate Results: Participants recommended a more transparent, independent, and evidence-based policy decision-making system through better coordination of HTA activities, data aggregation, capacity development, and a national HTA core model and framework. Platform participants described the current HTA environment as disjointed and lacking in resources and support from policy-making leaders. Despite the persisting challenges, awareness of the strengths and weaknesses of the current system combined with increasing interaction among Turkish stakeholders and the international HTA community can meaningfully contribute to the continued development and promotion of HTA in Turkey.

  8. Making Use of the New Student Assessment Standards To Enhance Technological Literacy.

    Science.gov (United States)

    Russell, Jill

    2003-01-01

    Describes the student assessment standards outlined in "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards," a companion to the "Standards for Technological Literacy." Discusses how the standards apply to everyday teaching practices. (JOW)

  9. 1.8 K Refrigeration Units for the LHC: Performance Assessment of Pre-series Units

    CERN Document Server

    Claudet, S; Millet, F; Tavian, L; 20th International Cryogenic Engineering Conference (ICEC20)

    2005-01-01

    The cooling capacity below 2 K for the superconducting magnets of the Large Hadron Collider (LHC), at CERN, will be provided by eight refrigeration units of 2400 W at 1.8 K, each of them coupled to a 4.5 K refrigerator. The two selected vendors have proposed cycles based on centrifugal cold compressors combined with volumetric screw compressors with sub-atmospheric suction, as previously identified by CERN as “reference cycle”. The supply of the series units was linked to successful testing and acceptance of the pre-series temporarily installed in a dedicated test station. The global capacity, the performance of cold compressors and some process specificities have been thoroughly tested and will be presented.

  10. Meat Quality Assessment by Electronic Nose (Machine Olfaction Technology

    Directory of Open Access Journals (Sweden)

    Sundar Balasubramanian

    2009-07-01

    Full Text Available Over the last twenty years, newly developed chemical sensor systems (so called “electronic noses” have made odor analyses possible. These systems involve various types of electronic chemical gas sensors with partial specificity, as well as suitable statistical methods enabling the recognition of complex odors. As commercial instruments have become available, a substantial increase in research into the application of electronic noses in the evaluation of volatile compounds in food, cosmetic and other items of everyday life is observed. At present, the commercial gas sensor technologies comprise metal oxide semiconductors, metal oxide semiconductor field effect transistors, organic conducting polymers, and piezoelectric crystal sensors. Further sensors based on fibreoptic, electrochemical and bi-metal principles are still in the developmental stage. Statistical analysis techniques range from simple graphical evaluation to multivariate analysis such as artificial neural network and radial basis function. The introduction of electronic noses into the area of food is envisaged for quality control, process monitoring, freshness evaluation, shelf-life investigation and authenticity assessment. Considerable work has already been carried out on meat, grains, coffee, mushrooms, cheese, sugar, fish, beer and other beverages, as well as on the odor quality evaluation of food packaging material. This paper describes the applications of these systems for meat quality assessment, where fast detection methods are essential for appropriate product management. The results suggest the possibility of using this new technology in meat handling.

  11. Meat quality assessment by electronic nose (machine olfaction technology).

    Science.gov (United States)

    Ghasemi-Varnamkhasti, Mahdi; Mohtasebi, Seyed Saeid; Siadat, Maryam; Balasubramanian, Sundar

    2009-01-01

    Over the last twenty years, newly developed chemical sensor systems (so called "electronic noses") have made odor analyses possible. These systems involve various types of electronic chemical gas sensors with partial specificity, as well as suitable statistical methods enabling the recognition of complex odors. As commercial instruments have become available, a substantial increase in research into the application of electronic noses in the evaluation of volatile compounds in food, cosmetic and other items of everyday life is observed. At present, the commercial gas sensor technologies comprise metal oxide semiconductors, metal oxide semiconductor field effect transistors, organic conducting polymers, and piezoelectric crystal sensors. Further sensors based on fibreoptic, electrochemical and bi-metal principles are still in the developmental stage. Statistical analysis techniques range from simple graphical evaluation to multivariate analysis such as artificial neural network and radial basis function. The introduction of electronic noses into the area of food is envisaged for quality control, process monitoring, freshness evaluation, shelf-life investigation and authenticity assessment. Considerable work has already been carried out on meat, grains, coffee, mushrooms, cheese, sugar, fish, beer and other beverages, as well as on the odor quality evaluation of food packaging material. This paper describes the applications of these systems for meat quality assessment, where fast detection methods are essential for appropriate product management. The results suggest the possibility of using this new technology in meat handling.

  12. A short history of health technology assessment in Germany.

    Science.gov (United States)

    Perleth, Matthias; Gibis, Bernhard; Göhlen, Britta

    2009-07-01

    To provide an overview of the development of health technology assessment (HTA) in Germany since the 1990s. Analysis of key documents (e.g. literature, laws, and other official documentation) and personal experiences. Health technology assessment (HTA) entered the political agenda in Germany only in the mid-1990s, basically as the result of a top-down approach toward more efficiency in health care, but with a strong impetus of an evidence-based medicine movement. Accordingly, HTA became part of several healthcare reform laws since 1997, which led to the establishment of the Federal Joint Committee (G-BA) and the Institute for Quality and Efficiency in Health Care (IQWiG) in 2004. This tandem construction aims at using evidence in decision-making processes for coverage and other decisions. These developments have led to a considerable impact of HTA in Germany. In addition, a broad spectrum of activities at universities and in other organizations, such as the German Institute for Medical Documentation and Information (DIMDI), can be observed that contribute to both teaching and research in HTA. German researchers in the field of HTA are actively involved in international projects, such as EUNetHTA, and contribute to scientific conferences and journals.

  13. EMERGENCE OF "DRIVERS" FOR THE IMPLEMENTATION OF HEALTH TECHNOLOGY ASSESSMENT.

    Science.gov (United States)

    Castro Jaramillo, Hector Eduardo; Moreno-Mattar, Ornella; Osorio-Cuevas, Diana

    2016-01-01

    Health technology assessment (HTA) examines the consequences of the application of health technologies and is aimed at better informing decision-makers. Over the past 30 years, different countries have implemented HTA organizations. Colombia established by law its own HTA agency (IETS) in 2011 which started operations in November 2012. The aim of this study was to assess the feasibility of conducting and using HTA to inform decision-making in this context. Through a qualitative approach, ten "drivers" emerged with the ability to help or hinder HTA development in this context: availability and quality of data, implementation strategy, cultural aspects, local capacity, financial support, policy/political support, globalization, stakeholder pressure, health system context, and usefulness perception. Semi-structured interviews were conducted with key HTA researchers, after following rigorous transcription, and thematic content analysis, those aspects that may be barriers or facilitator for HTA development and use in Colombia were identified. Although HTA has become a tool to inform decision-making around the world, its use may vary according to setting. Determining those aspects which may enable or interfere with HTA development and use in Colombia may be useful for other countries when considering the establishment of HTA systems. The conceptual transferability of concepts like "drivers" with caveats may be of interest for similar settings trying to incorporate HTA processes and institutions into systematic decision-making.

  14. Das Curriculum Health Technology Assessment (HTA, Version 2.0

    Directory of Open Access Journals (Sweden)

    Perleth, Matthias

    2017-10-01

    Full Text Available Health Technology Assessments (HTAs liefern für zahlreiche Entscheidungen im Gesundheitswesen relevante Informationen. Die Erstellung von HTA-Berichten erfordert gut ausgebildete, interdisziplinär arbeitende Spezialisten, die angemessene Interpretation und Umsetzung in Entscheidungen erfordert Verständnis seitens der Entscheidungsträger.Der Verein zur Förderung der Technologiebewertung im Gesundheitswesen (Health Technology Assessment e.V. und das Deutsche Netzwerk Evidenzbasierte Medizin e.V. haben bereits 2006 ein HTA-Curriculum entwickelt, das als Grundlage für HTA-Fortbildungskurse sowohl für Nutzer von HTA-Informationen wie auch für HTA-Autoren dient. Das Curriculum ist u.a. Grundlage für Fortbildungskurse an mehreren Universitäten. Aufgrund methodischer Weiterentwicklungen wurde nun eine Überarbeitung des Curriculums erforderlich. Das Curriculum greift auf Struktur und Inhalte international etablierter Studiengänge zurück, berücksichtigt aber auch die Besonderheiten der Regulation von Technologien und der Entscheidungsfindung in den Gesundheitssystemen der deutschsprachigen Länder. Es ist in insgesamt 10 Module untergliedert, die neben Grundlagen und Prinzipien von HTA u.a. auf die Statusbestimmung von Technologien, Prioritätensetzung, Wissens- und Informationsmanagement, Methodik der Erstellung von HTA-Berichten und Interessenkonflikte eingehen. Gegenüber der ursprünglichen Version wurden viele Inhalte präzisiert und Erfahrungen aus Lehrveranstaltungen, die das Curriculum umsetzen, wurden berücksichtigt.

  15. Object-Oriented Bayesian Networks (OOBN) for Aviation Accident Modeling and Technology Portfolio Impact Assessment

    Science.gov (United States)

    Shih, Ann T.; Ancel, Ersin; Jones, Sharon M.

    2012-01-01

    The concern for reducing aviation safety risk is rising as the National Airspace System in the United States transforms to the Next Generation Air Transportation System (NextGen). The NASA Aviation Safety Program is committed to developing an effective aviation safety technology portfolio to meet the challenges of this transformation and to mitigate relevant safety risks. The paper focuses on the reasoning of selecting Object-Oriented Bayesian Networks (OOBN) as the technique and commercial software for the accident modeling and portfolio assessment. To illustrate the benefits of OOBN in a large and complex aviation accident model, the in-flight Loss-of-Control Accident Framework (LOCAF) constructed as an influence diagram is presented. An OOBN approach not only simplifies construction and maintenance of complex causal networks for the modelers, but also offers a well-organized hierarchical network that is easier for decision makers to exploit the model examining the effectiveness of risk mitigation strategies through technology insertions.

  16. Technology Assessment in Support of the Presidential Vision for Space Exploration

    Science.gov (United States)

    Weisbin, Charles R.; Lincoln, William; Mrozinski, Joe; Hua, Hook; Merida, Sofia; Shelton, Kacie; Adumitroaie, Virgil; Derleth, Jason; Silberg, Robert

    2006-01-01

    This paper discusses the process and results of technology assessment in support of the United States Vision for Space Exploration of the Moon, Mars and Beyond. The paper begins by reviewing the Presidential Vision: a major endeavor in building systems of systems. It discusses why we wish to return to the Moon, and the exploration architecture for getting there safely, sustaining a presence, and safely returning. Next, a methodology for optimal technology investment is proposed with discussion of inputs including a capability hierarchy, mission importance weightings, available resource profiles as a function of time, likelihoods of development success, and an objective function. A temporal optimization formulation is offered, and the investment recommendations presented along with sensitivity analyses. Key questions addressed are sensitivity of budget allocations to cost uncertainties, reduction in available budget levels, and shifting funding within constraints imposed by mission timeline.

  17. Functional unit, technological dynamics, and scaling properties for the life cycle energy of residences.

    Science.gov (United States)

    Frijia, Stephane; Guhathakurta, Subhrajit; Williams, Eric

    2012-02-07

    Prior LCA studies take the operational phase to include all energy use within a residence, implying a functional unit of all household activities, but then exclude related supply chains such as production of food, appliances, and household chemicals. We argue that bounding the functional unit to provision of a climate controlled space better focuses the LCA on the building, rather than activities that occur within a building. The second issue explored in this article is how technological change in the operational phase affects life cycle energy. Heating and cooling equipment is replaced at least several times over the lifetime of a residence; improved efficiency of newer equipment affects life cycle energy use. The third objective is to construct parametric models to describe LCA results for a family of related products. We explore these three issues through a case study of energy use of residences: one-story and two-story detached homes, 1,500-3,500 square feet in area, located in Phoenix, Arizona, built in 2002 and retired in 2051. With a restricted functional unit and accounting for technological progress, approximately 30% of a building's life cycle energy can be attributed to materials and construction, compared to 0.4-11% in previous studies.

  18. Development of radiation protection technology for application of the retired steam generator, Kori Unit no. 1

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. H.; Jang, D. C.; Song, K. S.; Lee, S. J.; Ahn, C. S.; Kim, D. H.; Im, Y. K.; Kim, H. D. [Hanil Nuclear Co., Ltd., Anyang (Korea, Republic of)

    2005-04-15

    It is a field study to develop and verify maintenance technologies such as verification and technology development of ECT (Eddy current test) using failure, heat tube excavation and field pressure test regarding the utilization of retired steam generator using 2 units of Retired Steam Generator in Kori 1 that was replaced for the first time in Korea in 1998. Since May, 2003, our team has investigated Retired Steam Generator which was stored in Radioactive waste warehouse in Korea Hydro and Nuclear Power Kori unit no.1 Branch, in order to study natural fault ECT signal acquisition, maintenance technology verification, small tubes/samples abstraction. A temporal task zone was made focusing on 'Man Way at the bottom of Chamber 'A'.' The purpose of the study is to establish Radiological Protection and Radioactive Waste Treatment Plan by setting ALARA (As Low As Reasonably Achievable) goal systematically, which is the basic concept of Radiological Protection and reduction in exposure of radiological workers to radioactive materials with proper Radiological Protection countermeasures according to the changes in radioactivity, to prevent expansion from contamination and to manage 'Radioactive Waste Reduction Activities' effectively.

  19. Size matters: Installed maximal unit size predicts market life cycles of electricity generation technologies and systems

    International Nuclear Information System (INIS)

    Li, N.

    2008-01-01

    The electricity generation technologies and systems are complex and change in very dynamic fashions, with a multitude of energy sources and prime movers. Since an important concept in generator design is the 'economies of scale', we discover that the installed maximal unit size (capacity) of the generators is a key 'envelope-pushing' characteristic with logistical behaviors. The logistical wavelet analysis of the max unit sizes for different fuels and prime movers, and the cumulative capacities, reveals universal quantitative features in the aggregate evolution of the power industry. We extract the transition times of the max sizes (spanning 10-90% of the saturation limits) for different technologies and systems, and discover that the max size saturation in the 90-99% range precedes the saturation of cumulative capacities of the corresponding systems in the US. While these universal laws are still empirical, they give us a simple yet elegant framework to examine the evolution of the power industry and markets in predictive, not just descriptive, terms. Such laws give us a quantitative tool to spot trends and predict future development, invaluable in planning and resource allocation based on intrinsic technology and system market life cycles

  20. Superconducting magnetic energy storage (SMES). Results of a technology assessment

    International Nuclear Information System (INIS)

    Fleischer, T.; Juengst, K.P.; Brandl, V.; Maurer, W.; Nieke, E.

    1995-05-01

    The authors report on results of a Technology Assessment study commissioned by the German Federal Ministry of Education, Science, Research and Technology. The objective of this study was to evaluate the potential of superconducting magnetic energy storage (SMES) technology with respect to the economical, political and organization structures in the Federal Republic of Germany. The main focus of the study was on the technical and economic potential of large-scale SMES for diurnal load levelling applications. It was shown that there is no demand for the development of large SMES in Germany in the short and medium term. A second range of applications investigated is storage of electric energy for immediate delivery or consumption of electric power in case of need or for periodic power supply within the range of seconds. Due to its excellent dynamic properties SMES has substantial advantages over conventional storage technologies in this field. For those so-called dynamic applications SMES of small and medium energy capacity are needed. It was shown that SMES may be economically attractive for the provision of spinning reserve capacity in electrical networks, in particular cases for power quality applications (uninterruptable power supply, UPS) and for the compensation of cyclic loads, as well as in some market niches. The use of SMES for storage of recuperated energy in electrical railway traction systems has been proven to be uneconomical. Mobile SMES applications are unrealistic due to technical and size limitations. In SMES systems the energy is stored in a magnetic field. Biological objects as well as technical systems in the vicinity of a SMES plant are exposed to this field. The knowledge on impacts of magnetic fields on sensitive technical systems as well as on living organisms and especially on effects on human health is rather small and quite uncertain. (orig./MM) [de

  1. Dynamic life cycle assessment (LCA) of renewable energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Pehnt, M. [Institut for Energy and Environmental Research, Heidelberg (Germany)

    2006-01-01

    Before new technologies enter the market, their environmental superiority over competing options must be asserted based on a life cycle approach. However, when applying the prevailing status-quo Life Cycle Assessment (LCA) approach to future renewable energy systems, one does not distinguish between impacts which are 'imported' into the system due to the 'background system' (e.g. due to supply of materials or final energy for the production of the energy system), and what is the improvement potential of these technologies compared to competitors (e.g. due to process and system innovations or diffusion effects). This paper investigates a dynamic approach towards the LCA of renewable energy technologies and proves that for all renewable energy chains, the inputs of finite energy resources and emissions of greenhouse gases are extremely low compared with the conventional system. With regard to the other environmental impacts the findings do not reveal any clear verdict for or against renewable energies. Future development will enable a further reduction of environmental impacts of renewable energy systems. Different factors are responsible for this development, such as progress with respect to technical parameters of energy converters, in particular, improved efficiency; emissions characteristics; increased lifetime, etc.; advances with regard to the production process of energy converters and fuels; and advances with regard to 'external' services originating from conventional energy and transport systems, for instance, improved electricity or process heat supply for system production and ecologically optimized transport systems for fuel transportation. The application of renewable energy sources might modify not only the background system, but also further downstream aspects, such as consumer behavior. This effect is, however, strongly context and technology dependent. (author)

  2. Technology-Enhanced Formative Assessment: A Research-Based Pedagogy for Teaching Science with Classroom Response Technology

    Science.gov (United States)

    Beatty, Ian D.; Gerace, William J.

    2009-01-01

    "Classroom response systems" (CRSs) are a promising instructional technology, but most literature on CRS use fails to distinguish between technology and pedagogy, to define and justify a pedagogical perspective, or to discriminate between pedagogies. "Technology-enhanced formative assessment" (TEFA) is our pedagogy for CRS-based science…

  3. Technology and place: A geography of waste-to-energy in the United States

    Science.gov (United States)

    Howell, Jordan Patterson

    The adoption of technologies differs across space, for reasons attributed to economics, politics, and culture, but also due to limitations imposed by both the physical environment and the technology itself. This dissertation considers the case of waste-to-energy (WTE) incinerators in the United States, and asks why this technology is used in some places but rejected in others. The answer to this simple question is remarkably complex, as understandings and arguments about technology and the environment are mobilized differently by various actors to champion, oppose, or in some cases remain ambivalent about the installation and operation of WTE facilities. In this dissertation I explore the geography of WTE incineration in the United States since the 19th century. Informed by the insights of actor-network theory and the social construction of technology school, I employ the tools of discourse analysis to examine published and unpublished statements, papers, project studies, policy briefs, and archival materials generated alongside the development of WTE facilities in the United States, considering the specific case studies discussed below but also WTE technology in general. I look at federal, state, and local environmental agency documents as well as the papers of consulting firms, environmental and industry advocacy groups, and private companies. I also devote significant attention to the analysis of news media outlets in communities where WTE facilities are located or have been considered. In addition to these literal texts, I examine non-written and visual materials associated with WTE facilities, including films, websites, signage and logos, advertising campaigns, facility architecture, and artwork, as well as more abstract `texts' such as industry conferences, trade-show handouts, promotional materials, and academic and industry research programs. I build on this textual analysis with observations of WTE facilities in action. After an introductory chapter, I

  4. Assessment of geothermal resources of the United States, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Muffler, L.J.P. (ed.)

    1979-01-01

    The geothermal resource assessment presented is a refinement and updating of USGS Circular 726. Nonproprietary information available in June 1978 is used to assess geothermal energy in the ground and, when possible, to evaluate the fraction that might be recovered at the surface. Five categories of geothermal energy are discussed: conduction-dominated regimes, igneous-related geothermal systems, high-temperature (> 150/sup 0/C) and intermediate-temperature (90 to 150/sup 0/C) hydrothermal convection systems, low-temperature (< 90/sup 0/C) geothermal waters, and geopressured-geothermal energy (both thermal energy and energy from dissolved methane). Assessment data are presented on three colored maps prepared in cooperation with the National Oceanic and Atmospheric Administration. Separate abstracts were prepared for papers on these five categories.

  5. RELIABILITY ASSESSMENT OF ENTROPY METHOD FOR SYSTEM CONSISTED OF IDENTICAL EXPONENTIAL UNITS

    Institute of Scientific and Technical Information of China (English)

    Sun Youchao; Shi Jun

    2004-01-01

    The reliability assessment of unit-system near two levels is the most important content in the reliability multi-level synthesis of complex systems. Introducing the information theory into system reliability assessment, using the addible characteristic of information quantity and the principle of equivalence of information quantity, an entropy method of data information conversion is presented for the system consisted of identical exponential units. The basic conversion formulae of entropy method of unit test data are derived based on the principle of information quantity equivalence. The general models of entropy method synthesis assessment for system reliability approximate lower limits are established according to the fundamental principle of the unit reliability assessment. The applications of the entropy method are discussed by way of practical examples. Compared with the traditional methods, the entropy method is found to be valid and practicable and the assessment results are very satisfactory.

  6. Technology and Economic Assessment of Innovative Field Drainage Technologies in Denmark

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni

    Intensive agricultural production in most parts of the world especially in the more developed countries continues to mount pressure on water resources thereby threatening the quality of life in the aquatic ecosystems. With stringent standards such as those stipulated in the European Union Water...... Framework Directive (EU WFD), introduced to address the water quality problem the situation calls for solutions that would reconcile these two conflicting issues. “End-of-pipe” filter technologies that would disconnect agricultural drainage pathway before it gets to the aquatic environment have been...... proposed as appropriate solutions to this problem in the Danish context. The feasibility of these technologies with regards to their cost-effectiveness in nutrient mitigation, farmers’ adoption behavior, and environmental policy implementation is assessed in this thesis. The thesis comprises of four papers...

  7. Barriers and facilitators influencing ethical evaluation in health technology assessment.

    Science.gov (United States)

    Assasi, Nazila; Schwartz, Lisa; Tarride, Jean-Eric; O'Reilly, Daria; Goeree, Ron

    2015-01-01

    The objective of this study was to explore barriers and facilitators influencing the integration of ethical considerations in health technology assessment (HTA). The study consisted of two complementary approaches: (a) a systematic review of the literature; and (b) an eighteen-item online survey that was distributed to fifty-six HTA agencies affiliated with the International Network of Agencies for Health Technology Assessment. The review identified twenty-six relevant articles. The most often cited barriers in the literature were: scarcity, heterogeneity and complexity of ethical analysis methods; challenges in translating ethical analysis results into knowledge that is useful for decision makers; and lack of organizational support in terms of required expertise, time and financial resources. The most frequently cited facilitators included: usage of value-based appraisal methods, stakeholder and public engagement, enhancement of practice guidelines, ethical expertise, and educational interventions. Representatives of twenty-six (46.5 percent) agencies from nineteen countries completed the survey. A median of 10 percent (interquartile range, 5 percent to 50 percent) of the HTA products produced by the agencies was reported to include an assessment of ethical aspects. The most commonly perceived barriers were: limited ethical knowledge and expertise, insufficient time and resources, and difficulties in finding ethical evidence or using ethical guidelines. Educational interventions, demand by policy makers, and involvement of ethicists in HTA were the most commonly perceived facilitators. Our results emphasize the importance of simplification of ethics methodology and development of good practice guidelines in HTA, as well as capacity building for engaging HTA practitioners in ethical analyses.

  8. A DECADE OF HEALTH TECHNOLOGY ASSESSMENT IN POLAND.

    Science.gov (United States)

    Lipska, Iga; McAuslane, Neil; Leufkens, Hubert; Hövels, Anke

    2017-01-01

    The objective of this study is to illustrate and provide a better understanding of the role of health technology assessment (HTA) processes in decision making for drug reimbursement in Poland and how this approach could be considered by other countries of limited resources. We analyzed the evolution of the HTA system and processes in Poland over the past decade and current developments based on publicly available information. The role of HTA in drug-reimbursement process in Poland has increased substantially over the recent decade, starting in 2005 with the formation the Agency for Health Technology Assessment and Tariff System (AOTMiT). The key success factors in this development were effective capacity building based on the use of international expertise, the implementation of transparent criteria into the drug reimbursement processes, and the selective approach to the adoption of innovative medicines based on the cost-effectiveness threshold among other criteria. While Poland is regarded as a leader in Central and Eastern Europe, there is room for improvement, especially with regard to the quality of HTA processes and the consistency of HTA guidelines with reimbursement law. In the "pragmatic" HTA model use by AOTMiT, the pharmaceutical company is responsible for the preparation of a reimbursement dossier of good quality in line with HTA guidelines while the assessment team in AOTMiT is responsible for critical review of that dossier. Adoption of this model may be considered by other countries with limited resources to balance differing priorities and ensure transparent and objective access to medicines for patients who need them.

  9. Virtues, Ecological Momentary Assessment/Intervention and Smartphone Technology

    Directory of Open Access Journals (Sweden)

    Jason D Runyan

    2015-05-01

    Full Text Available Virtues, generally understood as stable and robust dispositions for certain responses across morally relevant situations, have been a growing topic of interest in psychology. A central topic of discussion has been whether the existence of virtues (as a kind of stable and robust disposition is called into question by studies showing that, to a significant degree, an individual’s situation can influence their responses. In this review, we examine reasons for thinking that these kinds of situational studies are limited in their ability to test dispositional stability and robustness; or, then, whether virtues exist. We make the case that these limitations can be addressed by aggregating repeated, cross-situational assessments of environmental, psychological and physiological variables within everyday life—a form of assessment often called ecological momentary assessment (EMA, or experience sampling. We, then, examine how advances in smartphone application (app technology, and their mass adoption, make these mobile devices an unprecedented vehicle for EMA and, thus, the psychological study of virtue. We, additionally, examine how smartphones might be used for virtue development by promoting changes in thought and behavior within daily life; a technique often called ecological momentary intervention (EMI. While EMA/I have become widely employed since the 1980s for the purposes of understanding and promoting change amongst clinical populations, few EMA/I studies have been devoted to understanding or promoting virtues within non-clinical populations. Further, most EMA/I studies have relied on journaling, PDAs, phone calls and/or text messaging systems. We explore how smartphone app technology provides a means of making EMA a more robust psychological method, EMI a more robust way of promoting positive change, and, as a result, opens up new possibilities for studying and promoting virtues.

  10. Safety assessment of multi-unit NPP sites subject to external events

    International Nuclear Information System (INIS)

    Samaddar, Sujit; Hibino, Kenta; Coman, Ovidiu

    2014-01-01

    This paper presents a framework for conducting a probabilistic safety assessment of multi-unit sites against external events. The treatment of multiple hazard on a unit, interaction between units, implementation of severe accident measures, human reliability, environmental conditions, metric of risk for both reactor and non-reactor sources, integration of risk and responses and many such important factors need to be addressed within the context of this framework. The framework facilitates the establishment of a comprehensive methodology that can be applied internationally to the peer review of safety assessment of multi-unit sites under the impact of multiple external hazards. In summary, it can be said that the site safety assessment for a multi-unit site will be quite complex and need to start with individual unit risk assessments, these need to be combined considering the interactions between units and their responses, and the fragilities of the installations established considering the combined demands from all interactions. Using newly established risk metric the risk can then be integrated for the overall site. Fig. 2 shows schematically such a proposal. Much work has to done and the IAEA has established a working group that is systematically establishing the structure and process to incorporate the many issues that are a part of a multi-unit site safety assessment. (authors)

  11. Defining and Assessing Chinese Syntactic Complexity via TC-Units

    Science.gov (United States)

    Yu, Qiaona

    2016-01-01

    The triad dimensions of complexity, accuracy, and fluency (CAF) has been widely used for assessing second language performance and development. Unlike accuracy and fluency, the construct of Chinese syntactic complexity has not been comprehensibly conceptualized or operationalized. Moreover, not tailored to the typological differences such as the…

  12. Seismic risk assessment and application in the central United States

    Science.gov (United States)

    Wang, Z.

    2011-01-01

    Seismic risk is a somewhat subjective, but important, concept in earthquake engineering and other related decision-making. Another important concept that is closely related to seismic risk is seismic hazard. Although seismic hazard and seismic risk have often been used interchangeably, they are fundamentally different: seismic hazard describes the natural phenomenon or physical property of an earthquake, whereas seismic risk describes the probability of loss or damage that could be caused by a seismic hazard. The distinction between seismic hazard and seismic risk is of practical significance because measures for seismic hazard mitigation may differ from those for seismic risk reduction. Seismic risk assessment is a complicated process and starts with seismic hazard assessment. Although probabilistic seismic hazard analysis (PSHA) is the most widely used method for seismic hazard assessment, recent studies have found that PSHA is not scientifically valid. Use of PSHA will lead to (1) artifact estimates of seismic risk, (2) misleading use of the annual probability of exccedance (i.e., the probability of exceedance in one year) as a frequency (per year), and (3) numerical creation of extremely high ground motion. An alternative approach, which is similar to those used for flood and wind hazard assessments, has been proposed. ?? 2011 ASCE.

  13. Robust technology and system for management of sucker rod pumping units in oil wells

    Science.gov (United States)

    Aliev, T. A.; Rzayev, A. H.; Guluyev, G. A.; Alizada, T. A.; Rzayeva, N. E.

    2018-01-01

    We propose a technology for calculating the robust, normalized correlation functions of the signal from the force sensor on the rod string attached to the hanger of the sucker rod pumping unit. The robust normalized correlation functions are used to form sets of informative attribute combinations, each of which corresponds to a technical condition of the sucker rod pumping unit. We demonstrate how these sets can be used to solve identification and management problems in the oil production process in real time using inexpensive controllers. The results obtained from using the system on real objects are also presented in this paper. It was determined that the energy saved and prolonged overhaul period substantially increased the cost-effectiveness.

  14. The technology of the bearings used in the nuclear power generation system turbine generator units

    International Nuclear Information System (INIS)

    Vialettes, J.M.; Rossato, M.

    1997-01-01

    A bearing consists of all the stationary part which allow the relative motion in rotation or in translation, of a shaft line. Inside the bearing there is a journal bearing with a metallic anti-friction coating (the babbitt metal). The high power turbine generator unit rotors are supported by smooth transversal journal bearings fed with oil which fills the empty space and runs along the shaft. The technologies used for the bearings and the thrust bearings of the turbine generator units and the various shaft lines of the French CP0/CP1- and CP2/1300 MW-type nuclear power plants are described. The experience feedback is then discussed in terms of the dynamics of the shaft line, i.e. vibrational problems, the influence of the alignment and the babbitt metal incidents. (author)

  15. Development of interface technology between unit processes in E-Refining process

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S. H.; Lee, H. S.; Kim, J. G. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    The pyroprocessing is composed mainly four subprocesses, such as an electrolytic reduction, an electrorefining, an electrowinning, and waste salt regeneration/ solidification processes. The electrorefining process, one of main processes which are composed of pyroprocess to recover the useful elements from spent fuel, is under development by Korea Atomic Energy Research Institute as a sub process of pyrochemical treatment of spent PWR fuel. The CERS(Continuous ElectroRefining System) is composed of some unit processes such as an electrorefiner, a salt distiller, a melting furnace for the U-ingot and U-chlorinator (UCl{sub 3} making equipment) as shown in Fig. 1. In this study, the interfaces technology between unit processes in E-Refining system is investigated and developed for the establishment of integrated E-Refining operation system as a part of integrated pyroprocessing

  16. Qualitative risk assessment for the 100-NR-2 Operable Unit. Revision 1

    International Nuclear Information System (INIS)

    1995-03-01

    This qualitative risk assessment provides information about the 100- NR-2 Groundwater Operable Unit of the Hanford reservation. Topics discussed in this report are: data evaluation; human health risk assessment overview; ecological evaluations; summary of uncertainty; results of both the ecological and human health evaluations; toxicity assessment; risk characterization; and a summary of contaminants of potential concern

  17. Speech Language Assessments in Te Reo in a Primary School Maori Immersion Unit

    Science.gov (United States)

    Naidoo, Kershni

    2012-01-01

    This research originated from the need for a speech and language therapy assessment in te reo Maori for a particular child who attended a Maori immersion unit. A Speech and Language Therapy te reo assessment had already been developed but it needed to be revised and normative data collected. Discussions and assessments were carried out in a…

  18. Assessment of corrosion failure in copper tube of refrigerator unit

    International Nuclear Information System (INIS)

    Mohd Harun; Hafizal Yazid; Zaiton Selamat; Mohd Shariff Sattar; Muhamamd Jalil

    2007-01-01

    The copper tubes of the refrigerator unit have been coated with red and white color paints. According to the date of purchase and complaint recorded, the tube leaked after operation about one year. It was observed that the tubes became black and green in color at U-bend of the tube. No corrosion occurred on the internal surface of the tube. The leaking started at outer surface of the tube. The leaking started at outer surface and propagated to the internal surface of the tubes. The leaking damage was caused by corrosive species either from atmospheric corrosion or the paint contained chloride and sulfur elements. The corrosive species of sulfur and chlorine were a main factor in pitting corrosion. (author)

  19. Reliability assessment of Indian Point Unit 3 containment structure

    International Nuclear Information System (INIS)

    Kawakami, J.; Hwang, H.; Chang, M.T.; Reich, M.

    1984-01-01

    In the current design criteria, the load combinations specified for design of concrete containment structures are in the deterministic formats. However, by applying the probability-based reliability method developed by BNL to the concrete containment structures designed according to the criteria, it is possible to evaluate the reliability levels implied in the current design criteria. For this purpose, the reliability analysis is applied to the Indian Point Unit No. 3 containment. The details of the containment structure such as the geometries and the rebar arrangements, etc., are taken from the working drawings and the final safety analysis reports. Three kinds of loads are considered in the reliability analysis. They are, dead load (D), accidental pressure due to a large LOCA (P), and earthquake ground acceleration (E). Reliability analysis of the containment subjected to all combinations of loads is performed. Results are presented in this report

  20. Assessing Interprofessional Teamwork in Inpatient Medical Oncology Units.

    Science.gov (United States)

    Weaver, A Charlotta; Callaghan, Mary; Cooper, Abby L; Brandman, James; O'Leary, Kevin J

    2015-01-01

    Teamwork is important to providing safe and effective care for hospitalized patients with cancer; however, few studies have evaluated teamwork in this setting. We surveyed all nurses, residents, hospitalists, and oncology physicians in oncology units at a large urban teaching hospital from September to November 2012. Respondents rated teamwork using a validated instrument (Safety Attitudes Questionnaire; scale, 0 to 100) and rated the quality of collaboration they had experienced with other professionals using a 5-point ordinal response scale (1, very low quality; 5, very high quality). Respondents also rated potential barriers to collaboration using a 4-point ordinal response scale (1, not at all a barrier; 4, major barrier). We compared ratings by professionals using analysis of variance (ANOVA). Overall, 129 (67%) of 193 eligible participants completed the survey. Teamwork scores differed across professional types, with nurses providing the lowest ratings (69.7) and residents providing the highest (81.9; ANOVA P = .01). Ratings of collaboration with nurses were high across all types of professionals. Ratings of collaboration with physicians varied significantly by professional type (P ≤ .02), with nurses giving lower ratings of collaboration with all physician types. Similarly, perceived barriers to collaboration differed by professional type, with nurses perceiving the biggest barrier to be negative attitudes regarding the importance of communication. Oncologists did not perceive any of the listed options as major barriers to collaboration. In inpatient oncology units, discrepancies exist between nurses' and physicians' ratings of teamwork and collaboration. Oncologists seem to be unaware that teamwork is suboptimal in this setting. Copyright © 2015 by American Society of Clinical Oncology.

  1. Scenario drafting to anticipate future developments in technology assessment

    Directory of Open Access Journals (Sweden)

    Retèl Valesca P

    2012-08-01

    Full Text Available Abstract Background Health Technology Assessment (HTA information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. Methods To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs was compared to clinical guidelines, calculated from the past (2005 until the future (2020. Results In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY, meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. Conclusions When optimal diffusion of a technology is sought, incorporating process

  2. Quality and productivity drive innovation and improvement at United Technologies Aerospace Operations, Inc.

    Science.gov (United States)

    Jamar, L. G.

    1986-01-01

    Quality and innovation are the hallmarks of the national space program. In programs that preceded the Shuttle Program the emphasis was on meeting the risks and technical challenges of space with safety, quality, reliability, and success. At United Technologies Aerospace Operations, Inc. (UTAO), the battle has developed along four primary fronts. These fronts include programs to motivate and reward people, development and construction of optimized processes and facilities, implementation of specifically tailored management systems, and the application of appropriate measurement and control systems. Each of these initiatives is described. However, to put this quality and productivity program in perspective, UTAO and its role in the Shuttle Program are described first.

  3. Qualitative risk assessment for 100-DR-1 source operable unit

    International Nuclear Information System (INIS)

    Naiknimbalkar, N.M.

    1994-01-01

    The Washington State Department of Ecology (Ecology), the US Environmental Protection Agency (EPA), and the US Department of Energy (DOE), signatories to the Hanford Federal Facility Agreement and Consent Order have developed the Hanford site Past-Practice Strategy to emphasize initiating and completing waste site cleanups with a bias for action. This strategy relies, in part, upon the use of a qualitative risk assessment (QRA) to assist in decision-making. The QRA is performed using the Hanford Site Baseline Risk Assessment Methodology (HSBRAM) as guidance (DOE-RL 1993a). The results will be used, along with other considerations, to make a recommendation for or against an interim remedial measure (IRM) at each high-priority waste site. The objective of conducting IRMs at Hanford, is to achieve cleanup and reduce risk in the shortest time possible and in a cost effective manner

  4. Future technology in cochlear implants: assessing the benefit.

    Science.gov (United States)

    Briggs, Robert J S

    2011-05-01

    It has been over 50 years since Djourno and Eyries first attempted electric stimulation in a patient with deafness. Over this time, the Cochlear Implant (CI) has become not only remarkably successful, but increasingly complex. Although the basic components of the system still comprise an implanted receiver stimulator and electrode, externally worn speech processor, microphone, control system, and power source, there are now several alternative designs of these components with different attributes that can be variably combined to meet the needs of specific patient groups. Development by the manufacturers has been driven both by these various patient needs, and also by the desire to achieve technological superiority, or at least differentiation, ultimately in pursuit of market share. Assessment of benefit is the responsibility of clinicians. It is incumbent on both industry and clinicians to ensure appropriate, safe, and affordable introduction of new technology. For example, experience with the totally implanted cochlear implant (TIKI) has demonstrated that quality of hearing is the over-riding consideration for CI users. To date, improved hearing outcomes have been achieved by improvements in: speech processing strategies; microphone technology; pre-processing strategies; electrode placement; bilateral implantation; use of a hearing aid in the opposite ear (bimodal stimulation); and the combination of electric and acoustic stimulation in the same ear. The resulting expansion of CI candidacy, with more residual hearing, further improves the outcomes achieved. Largely facilitated by advances in electronic capability and computerization, it can be expected that these improvements will continue. However, marked variability of results still occurs and we cannot assure any individual patient of their outcome. Realistic goals for implementation of new technology include: improved hearing in noise and music perception; effective invisible hearing (no external apparatus

  5. Assessment vs. appraisal of ethical aspects of health technology assessment: can the distinction be upheld?

    Directory of Open Access Journals (Sweden)

    Sandman, Lars

    2014-11-01

    Full Text Available [english] An essential component of health technology assessment (HTA is the assessment of ethical aspects. In some healthcare contexts, tasks are strictly relegated to different expert groups: the HTA-agencies are limited to assessment of the technology and other actors within the health care sector are responsible for appraisal and recommendations. Ethical aspects of health technologies are considered with reference to values or norms in such a way that may be prescriptive, or offer guidance as to how to act or relate to the issue in question. Given this internal prescriptivity, the distinction between assessment and appraisal seems difficult to uphold, unless the scrutiny stops short of a full ethical analysis of the technology. In the present article we analyse the distinction between assessment and appraisal, using as an example ethical aspects of implementation of GPS-bracelets for people with dementia. It is concluded that for HTA-agencies with a strictly delineated assessment role, the question of how to deal with the internal prescriptivity of ethics may be confusing. A full ethical analysis might result in a definite conclusion as to whether the technology in question is ethically acceptable or not, thereby limiting choices for decision-makers, who are required to uphold certain ethical values and norms. At the same time, depending on the exact nature of such a conclusion, different action strategies can be supported. A positive appraisal within HTA could result in a decision on implementation, or of the technology, thereby making it available to patients, or decisions to and even the use of the technology (even if someone else will have to fund it. A neutral appraisal, giving no definite answer as to whether implementation is recommended or not, could result in a towards the technology. A negative appraisal could result in a decision to or even implementation. This paper presents an overview of the implications of different outcomes

  6. Cost, Time, and Risk Assessment of Different Wave Energy Converter Technology Development Trajectories: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Jochem W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Laird, Daniel [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Costello, Ronan [Wave Venture; Roberts, Jesse [Sandia National Laboratories; Bull, Diana [Sandia National Laboratories; Babarit, Aurelien [Ecole Centrale de Nantes; Nielsen, Kim [Ramboll; Ferreira, Claudio Bittencourt [DNV-GL; Kennedy, Ben [Wave Venture

    2017-09-14

    This paper presents a comparative assessment of three fundamentally different wave energy converter technology development trajectories. The three technology development trajectories are expressed and visualised as a function of technology readiness levels and technology performance levels. The assessment shows that development trajectories that initially prioritize technology readiness over technology performance are likely to require twice the development time, consume a threefold of the development cost, and are prone to a risk of technical or commercial failure of one order of magnitude higher than those development trajectories that initially prioritize technology performance over technology readiness.

  7. A STRATEGIC ASSESSMENT OF THE ONLINE SPORTS BETTING INDUSTRY IN THE UNITED KINGDOM

    OpenAIRE

    Skogman, Ville

    2015-01-01

    A strategic assessment of the sports betting industry in the United Kingdom. The dissertation focuses on the field of strategic management, through which it tries to identify the competitive advantage of three operators in the United Kingdom online sports betting market; Betfair Group plc, Bet365 and William Hill plc.

  8. 15 CFR 971.501 - Resource assessment, recovery plan, and logical mining unit.

    Science.gov (United States)

    2010-01-01

    ..., and logical mining unit. 971.501 Section 971.501 Commerce and Foreign Trade Regulations Relating to... COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR... mining unit. (a) The applicant must submit with the application a resource assessment to provide a basis...

  9. Thermal Storage Systems Assessment for Energy Sustainability in Housing Units

    Directory of Open Access Journals (Sweden)

    Tania I. Lagunes Vega

    2016-04-01

    Full Text Available In order to achieve greater enhancements in energy sustainability for housing, the function and efficiency of two different passive cooling systems were studied: encapsulated water in recycled bottles of Polyethylene terephthalate (PET and polystyrene plates, in comparison with standard concrete slab systems, which are customarily used in housing. Experiments were placed over a tile surface, in which temperature changes were monitored for a period of 20 days from 08:00 to 20:00. The efficiency of passive thermal storage systems was endorsed through statistical analysis using the “SPSS” software. This resulted in a 17% energy saving, thus promoting energy sustainability in housing units, which reduces the use of electrical appliances required to stabilize conditions to achieve optimum thermal comfort for the human body inside a house, therefore, reducing electrical power consumption, CO2 emissions to the atmosphere and generating savings. Due to the complexity of a system with temperature changes, a fractal analysis was performed for each experimental system, using the “Benoit” software (V.1.3 with self-compatible tools of rescaled range (R/S and a wavelets method, showing that the thermal fluctuations on the tiles with the thermal storage system adapt to the rescaled range analysis and the regular tiles adapt to the wavelets method.

  10. Assessment of repair welding technologies of irradiated materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    Damages on reactor internals of stainless steels caused by stress corrosion cracking and fatigue were identified in aged BWR plants. Repair-welding is one of the practical countermeasure candidates to restore the soundness of components and structures. The project of 'Assessment of Repair welding Technologies of Irradiated Materials' has been carried out to develop the technical guideline regarding the repair-welding of reactor internals. In FY 2011, we investigated the fatigue strength of stainless steel SUS316L irradiated by YAG laser welding. Furthermore, revision of the technical guideline regarding the repair-welding of reactor internals was discussed. Diagram of tungsten inert gas (TIG) weld cracking caused by entrapped Helium was modified. Helium concentration for evaluation-free of TIG weld cracking caused by entrapped Helium was revised to 0.007appm from 0.01appm. (author)

  11. Development of Seismic Safety Assessment Technology for Containment Structure

    Energy Technology Data Exchange (ETDEWEB)

    Jang, J.B.; Suh, Y.P.; Lee, J.R. [Korea Electric Power Research Institute, Taejon (Korea)

    2002-07-01

    This final report is made based on the research results of seismic analysis and seismic margin assessment field, carried out during 3rd stage ('01.4.1{approx}'02.3.31) under financial support of MOST(Ministry of Science and Technology). The objective of this research is to develop the soil - structure interaction analysis technique with high reliability, the main research subjects, performed during 3rd stage are as follows. 1) Preparation of user's guide manual for SSI analysis with high accuracy. 2) Sensitivity analysis of effective shear strain and seismic input motion. 3) Database construction of Hualien earthquake recorded data. (author). 21 refs., 27 figs., 2 tabs.

  12. Technology assessment of laser-fusion power production

    International Nuclear Information System (INIS)

    Booth, L.A.; Frank, T.G.

    1976-01-01

    The inherent features of laser-induced fusion, some laser-fusion reactor concepts, and attendant means of utilizing the thermonuclear energy for commercial electric power generation are discussed. Theoretical fusion-pellet microexplosion energy release characteristics are described and the effects of pellet design options on pellet-microexplosion characteristics are discussed. The results of analyses to assess the engineering feasibility of reactor cavities for which protection of cavity components is provided either by suitable ablative materials or by diversion of plasmas by magnetic fields are presented. Two conceptual laser-fusion electric generating stations, based on different laser-fusion reactor concepts, are described. Technology developments for ultimate commercial application are outlined

  13. Alpha contamination assessment for D ampersand D activities: Technology overview

    International Nuclear Information System (INIS)

    Conaway, J.G.; Rawool-Sullivan, M.W.; MacArthur, D.W.

    1996-02-01

    Instruments based on the principle of Long-Range Alpha Detection (LRAD) detect the ions created in ambient air by Ionizing radiation, particularly alpha radiation, interacting with air molecules. Using either an electrostatic field or forced convection, these ions can be transported to a detection grid where the ions produce a small current that is measured with a sensitive electrometer. LRAD-based instruments can give separate, simultaneous measurements of alpha-emitting solids and inert radioactive gases such as radon. LRAD-based instruments assess surface contamination on an entire object or large surface area in a single, rapid measurement, including relatively inaccessible areas such as interior surfaces of pipes and process equipment. The LRAD concept is well proven and has been developed into a range of different radiation detection devices. This paper presents an overview of the technology, while several associated papers explore specific applications in greater detail

  14. Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

    International Nuclear Information System (INIS)

    1995-09-01

    The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R ampersand D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI)

  15. Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R&D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI).

  16. MANAGEMENT OF RESEARCH AND TEST REACTOR ALUMINUM SPENT NUCLEAR FUEL - A TECHNOLOGY ASSESSMENT

    Energy Technology Data Exchange (ETDEWEB)

    Vinson, D.

    2010-07-11

    The Department of Energy's Environmental Management (DOE-EM) Program is responsible for the receipt and storage of aluminum research reactor spent nuclear fuel or used fuel until ultimate disposition. Aluminum research reactor used fuel is currently being stored or is anticipated to be returned to the U.S. and stored at DOE-EM storage facilities at the Savannah River Site and the Idaho Nuclear Technology and Engineering Center. This paper assesses the technologies and the options for safe transportation/receipt and interim storage of aluminum research reactor spent fuel and reviews the comprehensive strategy for its management. The U.S. Department of Energy uses the Appendix A, Spent Nuclear Fuel Acceptance Criteria, to identify the physical, chemical, and isotopic characteristics of spent nuclear fuel to be returned to the United States under the Foreign Research Reactor Spent Nuclear Fuel Acceptance Program. The fuel is further evaluated for acceptance through assessments of the fuel at the foreign sites that include corrosion damage and handleability. Transport involves use of commercial shipping casks with defined leakage rates that can provide containment of the fuel, some of which are breached. Options for safe storage include wet storage and dry storage. Both options must fully address potential degradation of the aluminum during the storage period. This paper focuses on the various options for safe transport and storage with respect to technology maturity and application.

  17. CURRENT ENVIRONMENT FOR INTRODUCING HEALTH TECHNOLOGY ASSESSMENT IN GREECE.

    Science.gov (United States)

    Kani, Chara; Kourafalos, Vasilios; Litsa, Panagiota

    2017-01-01

    The aim of this study was to describe the current regulatory environment in Greece to evaluate the potential introduction of health technology assessment (HTA) for medicinal products for human use. Data sources consist of national legislation on pricing and reimbursement of health technologies to identify the potential need of establishing HTA and its relevant structure. The pricing procedure regarding medicinal products for human use is based on an external reference pricing mechanism which considers the average of the three lowest Euorpean Union prices. Currently, a formal HTA procedure has not been applied in Greece, and the only prerequisite used for the reimbursement of medicinal products for human use is their inclusion in the Positive Reimbursement List. To restrict pharmaceutical expenditure, a variety of measures-such as clawback mechanisms, rebates, monthly budget caps per physician, generics penetration targeting-have been imposed, aiming mainly to regulate the price level rather than control the introduction of medicinal products for human use in the Greek pharmaceutical market. Greece has the opportunity to rapidly build capacity, implement, and take advantage of the application of HTA mechanisms by clearly defining the goals, scope, systems, context, stakeholders, and methods that will be involved in the local HTA processes, taking into account the country's established e-prescription system and the recently adapted legislative framework.

  18. Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

    Science.gov (United States)

    Ancel, Ersin; Shih, Ann T.

    2014-01-01

    NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

  19. Ethical issues of obesity surgery--a health technology assessment.

    Science.gov (United States)

    Saarni, Samuli I; Anttila, Heidi; Saarni, Suoma E; Mustajoki, Pertti; Koivukangas, Vesa; Ikonen, Tuija S; Malmivaara, Antti

    2011-09-01

    New surgical technologies may challenge societal values, and their adoption may lead to ethical challenges. Despite proven cost-effectiveness, obesity (bariatric) surgery and its public funding have been questioned on ethical arguments relating to, for example, the self-inflicted or non-disease nature of obesity. Our aim was to analyze the ethical issues relevant to bariatric surgery. A comprehensive health technology assessment was conducted on bariatric surgery for morbid obesity using the EUnetHTA method, including a fully integrated ethical analysis. The ethical arguments suggesting that obesity should not be surgically treated because it is self-inflicted were rejected. Medicalization of obesity may have both positive and negative effects that impact the various stakeholders differently, thus being difficult to balance. Informing bariatric surgery patients and actively supporting their autonomy is exceptionally important, as the benefits and harms of both obesity and bariatric surgery are complex, and the outcome depends on how well the patient understands and adheres to the life-long changes in eating habits required. Justice considerations are important in organizing surgical treatment of obesity, as the obese are discriminated against in many ways and obesity is more common in socioeconomically disadvantaged populations who might have problems of access to treatments. Obesity should be treated like other diseases in health care, and obesity surgery rationed like other cost-effective treatments. Positive actions to ensure patient autonomy and just access to surgical treatments may be warranted.

  20. Japanese technology assessment: Computer science, opto- and microelectronics mechatronics, biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Brandin, D.; Wieder, H.; Spicer, W.; Nevins, J.; Oxender, D.

    1986-01-01

    The series studies Japanese research and development in four high-technology areas - computer science, opto and microelectronics, mechatronics (a term created by the Japanese to describe the union of mechanical and electronic engineering to produce the next generation of machines, robots, and the like), and biotechnology. The evaluations were conducted by panels of U.S. scientists - chosen from academia, government, and industry - actively involved in research in areas of expertise. The studies were prepared for the purpose of aiding the U.S. response to Japan's technological challenge. The main focus of the assessments is on the current status and long-term direction and emphasis of Japanese research and development. Other aspects covered include evolution of the state of the art; identification of Japanese researchers, R and D organizations, and resources; and comparative U.S. efforts. The general time frame of the studies corresponds to future industrial applications and potential commercial impacts spanning approximately the next two decades.

  1. Finding Qualitative Research Evidence for Health Technology Assessment.

    Science.gov (United States)

    DeJean, Deirdre; Giacomini, Mita; Simeonov, Dorina; Smith, Andrea

    2016-08-01

    Health technology assessment (HTA) agencies increasingly use reviews of qualitative research as evidence for evaluating social, experiential, and ethical aspects of health technologies. We systematically searched three bibliographic databases (MEDLINE, CINAHL, and Social Science Citation Index [SSCI]) using published search filters or "hedges" and our hybrid filter to identify qualitative research studies pertaining to chronic obstructive pulmonary disease and early breast cancer. The search filters were compared in terms of sensitivity, specificity, and precision. Our screening by title and abstract revealed that qualitative research constituted only slightly more than 1% of all published research on each health topic. The performance of the published search filters varied greatly across topics and databases. Compared with existing search filters, our hybrid filter demonstrated a consistently high sensitivity across databases and topics, and minimized the resource-intensive process of sifting through false positives. We identify opportunities for qualitative health researchers to improve the uptake of qualitative research into evidence-informed policy making. © The Author(s) 2016.

  2. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- monitoring technology

    International Nuclear Information System (INIS)

    Johnson, H.R.; Overbey, W.K. Jr.; Molnar, D.L.

    1994-02-01

    The objective of this study was to investigate and evaluate existing proven technologies for the monitoring of hazardous waste sites during remediation activities and to protect the health and safety of all related entities while complying with government regulations. The study began with a literature search to determine manufacturers and related instrumentation which would be applicable to the most complex (in terms of toxicity and mediums affected) sites. Criteria for monitoring and analyses were established and a functional analysis was performed to select the most appropriate instrumentation available. Gas Chromatography/Mass Spectrometry is the most widely accepted method for generating quantitative data given the characterization of the Winfield site. Fourier Transform Infrared Spectroscopy, while not a new technology, has the distinct advantage of measuring simultaneously hundreds of gaseous pollutants which can also be sparged from water and this technology received the highest score as per the functional analysis. To protect workers and the public surrounding remediation sites which are known to contain VOCs, on site monitoring prior to, and during the excavation operations, is recommended until enough data are obtained to assess the health risks to workers. The conclusion of this study is to recommend evaluation of both the mobile GC/MS and FTIR systems simultaneously in identical operating conditions

  3. Health Technology Assessment and vaccine: new needs and opportunities?

    Directory of Open Access Journals (Sweden)

    Giuseppe La Torre

    2007-03-01

    Full Text Available Health Technology Assessment (HTA can represent an innovative and effective approach to supply decisionmakers with a valid instrument to improve the allocation of resources in the field of vaccines. We proposed a HTA approach for considering the introduction of a new vaccine that could potentially have a great impact on the population’s health, using as an example the vaccine against Human Papilloma Virus (HPV. This approach could be of great interest when the decision making process involves choices regarding new vaccines. We developed a HTA approach for assessing all of the aspects involved in the introduction of vaccines against HPV in Italy, considering the following issues: - epidemiological evaluation of HPV infection and related pathologies through the consultation of data banks and the scientific literature; - evaluation of health care resources utilisation by people suffering from the infection/ related diseases, through the consultation of hospital archives; - systematic review and meta-analysis of randomised clinical trials on HPV vaccination effectiveness and safety; - mathematical modelling and economic evaluation of the vaccination using a cost-effectiveness analysis; - evaluation of the impact of vaccination on the Health System [organisational aspects, vaccine surveillance, relationship between different decisional levels (national, regional]; - analysis of the ethical, social (acceptability, availability, accessibility, information and legislative aspects of vaccination. A HTA report on the new vaccine could represent an new important tool to support the choice of decision makers in order to better inform the allocation of economic resources and maximize healthcare services, since it takes into account not only the burden and the epidemiology of the disease, and the economic evaluation of different scenarios, but also the social, legal and bioethical aspects. For HTA to support the introduction of new technologies, and new

  4. INFLUENCE OF HEALTH TECHNOLOGY ASSESSMENT AND ITS MEASUREMENT.

    Science.gov (United States)

    Hailey, David; Werkö, Sophie; Rosén, Måns; Macpherson, Karen; Myles, Susan; Gallegos Rivero, Verónica; Hipólito-Olivares, Cecilia; Sihvo, Sinikka; Pwu, Jasmine; Yang, Wen-Wen; Chen, Yong-Chen; Perez Galán, Ana; Aleman, Alicia; Villamil, Elena

    2016-01-01

    The aim of this study was to obtain information on methods used to measure health technology assessment (HTA) influence, decisions that were influenced, and outcomes linked to HTA. Electronic databases were used to locate studies in which HTA influence had been demonstrated. Inclusion criteria were studies that reliably reported consideration by decision makers of HTA findings; comparative studies of technology use before and after HTA; and details of changes in policy, health outcomes, or research that could be credibly linked to an HTA. Fifty-one studies were selected for review. Settings were national (24), regional (12), both national and regional (3) hospitals (9), and multinational (3). The most common approach to appraisal of influence was review of policy or administrative decisions following HTA recommendations (51 percent). Eighteen studies (35 percent) reported interview or survey findings, thirteen (26 percent) reviewed administrative data, and six considered the influence of primary studies. Of 142 decisions informed by HTA, the most common types were on routine clinical practice (67 percent of studies), coverage (63 percent), and program operation (37 percent). The most frequent indications of HTA influence were on decisions related to resource allocation (59 percent), change in practice pattern (31 percent), and incorporation of HTA details in reference material (18 percent). Few publications assessed the contribution of HTA to changing patient outcomes. The literature on HTA influence remains limited, with little on longer term effects on practice and outcomes. The reviewed publications indicated how HTA is being used in different settings and approaches to measuring its influence that might be more widely applied, such as surveys and monitoring administrative data.

  5. Skin Hydration Assessment through Modern Non-Invasive Bioengineering Technologies.

    Science.gov (United States)

    Constantin, Maria-Magdalena; Poenaru, Elena; Poenaru, Calin; Constantin, Traian

    2014-03-01

    Non-invasive bioengineering technologies continuously discovered and developed in recent decades provide a significant input to research development and remarkably contribute to the improvement of medical education and care to our patients. Assessing skin hydration by using the capacitance method for a group of patients with allergic contact dermatitis versus healthy subjects, before and after applying a moisturiser (assessing the immediate and long-term effectiveness of hydration). For both groups, but especially for the patients with dry skin, there was a clear improvement of hydration, statistically significant after applying the moisturiser. In the case of the patients with allergic contact dermatitis, hydration was at a maximum immediately after the first application, and then maintained an increased level after 7 and 28 days, respectively. In the healthy subjects, the increase in hydration was lower, but progressive. The moisturiser determined an increase in hydration for all age groups, but those who showed the most obvious effect were the young adults (18-29 years old) with an increase of 19.9%.The maintenance effect of hydration lasted for 28 days, while the improvement was important for allergic skin (17.1%) and significant for healthy skin (10.9%). The assessment of epidermal hydration performed by using the corneometer showed very good hydration of the stratum corneum for both groups studied, with immediate and long-term effect. This study also showed that the degree of skin hydration was inversely proportional with age. The corneometer is easy to use, efficient and widely utilised in international studies for measurements in healthy or pathological conditions, for quantitative assessment of the effectiveness of various preparations intended for application to the skin surface, under well-controlled and standardised conditions.

  6. Economic assessment of new technology of nuclear fuel cycle

    International Nuclear Information System (INIS)

    Kim, H. S.; Song, K. D.; Lee, M. K.; Moon, K. H.; Kim, S. S.; Lee, J. S.; Choi, H. B.

    1998-06-01

    The purpose of this study is to analyze the impact of the change in the manufacturing cost of DUPIC fuel on the power generation cost. In doing so, the installed capacity of nuclear power plants until the year 2040 were forecasted by using the trend analysis technique. This study used the NUFCAP computer code, developed by KAERI, which allows to conduct quantitative evaluation of the volumes of nuclear fuel and spent fuel as well as unit and system costs of nuclear fuel cycle. As a result of this study, it was found that there was little economic difference between the two possible options for the Korean electric system, direct disposal and DUPIC fuel cycle. The rate of discount and the manufacturing cost of DUPIC fuel were resulted in the most significant factors affecting the economics of the two options. Finally, it was expected that the result of this study provided the arguing point for the international debate on the economics of DUPIC fuel cycle technology. (author). 6 refs., 7 tabs., 8 figs

  7. Environmental assessments of alternative energy strategies in the United States

    International Nuclear Information System (INIS)

    Ballou, S.W.; Katz, A.M.

    1979-01-01

    The Regional Issues Identification and Assessment (RIIA) program is an evaluation of the regional impacts of future energy development. These studies are conducted for the Department of Energy. The impacts described in this paper for 1990 are based on a national energy projection (scenario) that assumes medium energy demand and fuel supply through 1990, but does not incorporate the policies of the 1978 National Energy Act. The RIIA study plan uses the predicted fuel mixes derived from the PIES scenario as a starting point for its analysis. County level patterns for utility, industry and mining activities for 1990 were then developed from the federal region totals. Energy sources addressed were coal, nuclear, oil, oil shale, gas, geothermal, hydroelectric, and solar. The impact of these county-level patterns of utility, industry, and mining activities on the air, water, and land resources of the country and on the socioeconomic and health and safety aspects of the nation's welfare are analyzed

  8. Use of solidification/stabilization treatment technology for environmental remediation in the United States and Canada

    International Nuclear Information System (INIS)

    Wilk, C.M.

    2002-01-01

    In the United States (U.S.) Solidification/Stabilization (S/S) treatment is used to treat hazardous wastes for disposal, and in the remediation/site restoration of contaminated land. S/S is also an increasingly popular technology for Brownfields (industrial property) redevelopment since treated wastes can often be left on-site and to actually improve the site's soil for subsequent construction. The U.S. Environmental Protection Agency (EPA) considers S/S to be an established treatment technology. EPA has identified S/S treatment as Best Demonstrated Available Treatment Technology (BDAT) for at least 57 commonly produced industrial wastes (Resource Conservation and Recovery Act (RCRA)-listed hazardous wastes) and has selected S/S treatment for 25% of its Superfund (abandoned or uncontrolled) site remediation projects. S/S treatment involves mixing a binding reagent into the contaminated media or waste. Successful treatment is accomplished through physical changes to the waste form, and often, chemical changes to the hazardous constituents themselves. Commonly used S/S binding reagents in include portland cement, cement kiln dust, lime, lime kiln dust and fly ash. These materials are used alone or in combination. Proprietary reagents are also beginning to be marketed and used in the U.S. and Canada. This paper will discuss: (a) applicability of the technology to various wastes, (b) basic cement chemistry relating to S/S, (c) tests used to design treatability studies and to verify treatment, (d) basics on implementation of the technology in the field, and (e) examples of actual projects. (author)

  9. Assessing the Role of Technology Adoption in China's Growth Performance

    DEFF Research Database (Denmark)

    Wirz, Nadja

    to what extent these productivity increases can be explained by technology-adoption theory. In less developed countries, the key element behind technological progress is technology adoption, the process of copying technological knowledge invented throughout the world. To uncover a measure of China...

  10. New technologies for a postaccident control room habitability assessment

    International Nuclear Information System (INIS)

    Lahti, G.P.; Perchiazzi, W.T.

    1993-01-01

    Older nuclear power plants typically considered only a nominal amount of unfiltered in-leakage (typically 10 ft 3 /min) affecting their postaccident habitability. However, recent measurements of unfiltered in-leakage show leakages in excess of the nominal 10 ft 3 /m in. The assessment of postaccident doses in control rooms is done in a number of well-defined steps: (1) Determine the initial release of radioactivity to the containment (the open-quotes source termclose quotes). (2) Determine the release of radioactivity to the environment. (3) Determine the atmospheric dispersion and the concentration at the control room air intake. (4) Determine within-building dilution (if any). (5) Determine unfiltered in-leakage. (6) Determine the concentration of radioactivity in the control room. (7) Determine the dose to control room occupants. The prescriptive methodology of the Murphy-Campe paper and Standard Review Plan (SRP) 6.4 has been used by the U.S. Nuclear Regulatory Commission (NRC) to assess control room designs. However, a number of new technologies have been employed to reevaluate an existing pressurized water reactor plant design

  11. An Examination of Information Technology and Its Perceived Quality Issues in Single System Hospitals in the United States

    Science.gov (United States)

    Byrd, Linda W.

    2009-01-01

    The safety and quality of healthcare is of great concern in the United States. The positive effects of information technology reported in past research, especially case studies, has encouraged expectations that information technology may increase the quality of healthcare while reducing costs of healthcare. The goals of this study was to examine…

  12. Transcatheter aortic valve replacement in patients with severe aortic stenosis who are at high risk for surgical complications: summary assessment of the California Technology Assessment Forum.

    Science.gov (United States)

    Tice, Jeffrey A; Sellke, Frank W; Schaff, Hartzell V

    2014-08-01

    The California Technology Assessment Forum is dedicated to assessment and public reporting of syntheses of available data on medical technologies. In this assessment, transcatheter aortic valve replacement (TAVR) was evaluated for patients with severe aortic stenosis (AS) who are at high risk for complications. In this assessment, 5 criteria were used: Regulatory approval, sufficient scientific evidence to allow conclusions on effectiveness, evidence that the technology improves net health outcomes, evidence that the technology is as beneficial as established methods, and availability of the technology outside investigational settings. In this assessment, all 5 criteria were judged to have been met. The primary benefit of TAVR is the ability to treat AS in patients who would otherwise be ineligible for surgical aortic valve replacement. It may also be useful for patients at high surgical risk by potentially reducing periprocedural complications and avoiding the morbidity and recovery from undergoing heart surgery. Potential harms include the need for conversion to an open procedure, perioperative death, myocardial infarction, stroke, bleeding, valve embolization, aortic regurgitation, heart block that requires a permanent pacemaker, renal failure, pulmonary failure, and major vascular complications such as cardiac perforation or arterial dissection. Potential long-term harms include death, stroke, valve failure or clotting, and endocarditis. As highlighted at the February 2012 California Technology Assessment Forum meeting, the dispersion of this technology to new centers across the United States must proceed with careful thought given to training and proctoring multidisciplinary teams to become new centers of excellence. TAVR is a potentially lifesaving procedure that may improve quality of life for patients at high risk for surgical AVR. However, attention needs to be paid to appropriate patient selection, their preoperative evaluation, surgical techniques, and

  13. Assessing technology transfer in the Clean Development Mechanism

    OpenAIRE

    Cools, Sara Lena Yri

    2007-01-01

    This paper presents an operational definition of technology transfer, to be applied in studies of technology transfer in projects under the Kyoto Protocol’s Clean Development Mechanism (CDM). Although the CDM has never been given an explicit mandate for transferring technologies, its contribution in this respect has both been hoped for and exacted. The discussions of technology transfer in CDM projects are however blurred by widely varying conceptions of what technology transfer is. Qu...

  14. Report by the AERES on the unit: Department of Nuclear Technology under the supervision of the establishments and bodies: Atomic Energy Commission (CEA)

    International Nuclear Information System (INIS)

    2010-02-01

    This report is a kind of audit report on a research laboratory, the DTN (Department of Nuclear Technology) which comprises four departments: technology of industrial reactors, advanced technologies and processes, transfer modelling and nuclear measurements, thermal-hydraulic and technological studies. The authors discuss an assessment of the whole unit activities in terms of strengths and opportunities, aspects to be improved, risks and recommendations, productions and publications, scientific quality, influence and attractiveness (awards, recruitment capacity, capacity to obtain financing and to tender, participation to international programs), strategy and governance, and project. The same discussion is proposed for the different research themes: design of nuclear installation circuits and components, thermal-hydraulic and severe accidents, instrumentation for nuclear measurements and process control, transfers in reactors and in the environment

  15. Assessing the accuracy of forecasting: applying standard diagnostic assessment tools to a health technology early warning system.

    Science.gov (United States)

    Simpson, Sue; Hyde, Chris; Cook, Alison; Packer, Claire; Stevens, Andrew

    2004-01-01

    Early warning systems are an integral part of many health technology assessment programs. Despite this finding, to date, there have been no quantitative evaluations of the accuracy of predictions made by these systems. We report a study evaluating the accuracy of predictions made by the main United Kingdom early warning system. As prediction of impact is analogous to diagnosis, a method normally applied to determine the accuracy of diagnostic tests was used. The sensitivity, specificity, and predictive values of the National Horizon Scanning Centre's prediction methods were estimated with reference to an (imperfect) gold standard, that is, expert opinion of impact 3 to 5 years after prediction. The sensitivity of predictions was 71 percent (95 percent confidence interval [CI], 0.36-0.92), and the specificity was 73 percent (95 percent CI, 0.64-0.8). The negative predictive value was 98 percent (95 percent CI, 0.92-0.99), and the positive predictive value was 14 percent (95 percent CI, 0.06-0.3). Forecasting is difficult, but the results suggest that this early warning system's predictions have an acceptable level of accuracy. However, there are caveats. The first is that early warning systems may themselves reduce the impact of a technology, as helping to control adoption and diffusion is their main purpose. The second is that the use of an imperfect gold standard may bias the results. As early warning systems are viewed as an increasingly important component of health technology assessment and decision making, their outcomes must be evaluated. The method used here should be investigated further and the accuracy of other early warning systems explored.

  16. Comparative evaluation by lifecycle and risk assessment of agrobiological and technological routes of production

    NARCIS (Netherlands)

    Moll, H.C.; Schoot Uiterkamp, A.J.M.

    The application of lifecycle and risk assessment methodologies for environmental assessment of agricultural products is growing and produces interesting results. This allows comparisons between agricultural and technological routes of production. An evaluation of such assessments provides increased

  17. Integrated risk assessment for multi-unit NPP sites—A comparison

    International Nuclear Information System (INIS)

    Kumar, C. Senthil; Hassija, Varun; Velusamy, K.; Balasubramaniyan, V.

    2015-01-01

    Highlights: • Framework for integrated risk assessment for multi-unit NPP sites. • Categorization of external and internal events. • Modelling of key issues: mission time, cliff-edge, common cause failures, etc. • Safety goals for multi-unit NPP sites. • Comparison of site core damage frequency in one, two, three and four unit sites. - Abstract: Most of the nuclear power producing sites in the world houses multiple units. Such sites are faced with hazards generated from external events: earthquake, tsunami, flood, etc. and can threaten the safety of nuclear power plants. Further, risk from a multiple unit site and its impact on the public and environment was evident during the Fukushima nuclear disaster in March 2011. It is therefore important to evolve a methodology to systematically assess the risk from multi-unit site. For a single unit site, probabilistic risk assessment technique identifies the potential accident scenarios, their consequences, and estimates the core damage frequency that arise due to internal and external hazards. This challenging task becomes even more complex for a multiple unit site, especially when the external hazards that has the potential to generate one or more correlated hazards or a combination of non-correlated hazards are to be modelled. This paper presents an approach to evaluate risk for multiple NPP sites and also compare the risk for sites housing single, double and multiple nuclear plants.

  18. Integrated risk assessment for multi-unit NPP sites—A comparison

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, C. Senthil, E-mail: cskumar@igcar.gov.in [AERB-Safety Research Institute, Kalpakkam (India); Hassija, Varun; Velusamy, K. [Reactor Design Group, Indira Gandhi Centre for Atomic Research, Kalpakkam (India); Balasubramaniyan, V. [AERB-Safety Research Institute, Kalpakkam (India)

    2015-11-15

    Highlights: • Framework for integrated risk assessment for multi-unit NPP sites. • Categorization of external and internal events. • Modelling of key issues: mission time, cliff-edge, common cause failures, etc. • Safety goals for multi-unit NPP sites. • Comparison of site core damage frequency in one, two, three and four unit sites. - Abstract: Most of the nuclear power producing sites in the world houses multiple units. Such sites are faced with hazards generated from external events: earthquake, tsunami, flood, etc. and can threaten the safety of nuclear power plants. Further, risk from a multiple unit site and its impact on the public and environment was evident during the Fukushima nuclear disaster in March 2011. It is therefore important to evolve a methodology to systematically assess the risk from multi-unit site. For a single unit site, probabilistic risk assessment technique identifies the potential accident scenarios, their consequences, and estimates the core damage frequency that arise due to internal and external hazards. This challenging task becomes even more complex for a multiple unit site, especially when the external hazards that has the potential to generate one or more correlated hazards or a combination of non-correlated hazards are to be modelled. This paper presents an approach to evaluate risk for multiple NPP sites and also compare the risk for sites housing single, double and multiple nuclear plants.

  19. Variation in Health Technology Assessment and Reimbursement Processes in Europe.

    Science.gov (United States)

    Akehurst, Ronald L; Abadie, Eric; Renaudin, Noël; Sarkozy, François

    2017-01-01

    It has been suggested that differences in health technology assessment (HTA) processes among countries, particularly within Europe, have led to inequity in patient access to new medicines. To provide an up-to-date snapshot analysis of the present status of HTA and reimbursement systems in select European countries, and to investigate the implications of these processes, especially with regard to delays in market and patient access. HTA and reimbursement processes were assessed through a review of published and gray literature, and through a series of interviews with HTA experts. To quantify the impact of differences among countries, we conducted case studies of 12 products introduced since 2009, including 10 cancer drugs. In addition to the differences in HTA and reimbursement processes among countries, the influence of particular sources of information differs among HTA bodies. The variation in the time from the authorization by the European Medicines Agency to the publication of HTA decisions was considerable, both within and among countries, with a general lack of transparency as to why some assessments take longer than others. In most countries, market access for oncology products can occur outside the HTA process, with sales often preceding HTA decisions. It is challenging even for those with considerable personal experience in European HTA processes to establish what is really happening in market access for new drugs. We recommend that efforts should be directed toward improving transparency in HTA, which should, in turn, lead to more effective processes. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  20. Technology transfer and radioactive waste management at TMI-2 [Three Mile Island Unit 2

    International Nuclear Information System (INIS)

    Saunders, J.R.

    1988-01-01

    The accident that occurred on March 28, 1979, at the Three Mile Island Unit 2 (TMI-2) nuclear generating station caused extensive damage to the reactor core and created high radiation contamination levels throughout the facility. The electric power industry, regulators, and government agencies were faced with one of the most technically challenging recovery situations ever encountered in this country. But it was also realized that this adversity presented opportunities for the advancement of state-of-the-art technologies as well as the potential to produce information that could enhance nuclear power plant safety and reliability. Perhaps one of the more significant aspects of the TMI-2 recovery has been the advancement of radioactive waste management technology. The high levels and unusual nature of the TMI-2 radioactive waste necessitated the development of innovative techniques for processing, packaging, shipping, and disposal. The investment in research was rewarded with large volume reductions and associated cost savings. It is anticipated that the TMI-2 radioactive waste management technology will make major contributions to the design of new systems to meet this growing need. The following areas appear particularly suited for this purpose: volume reduction, high-integrity containers, and selective isotope removal