WorldWideScience

Sample records for technology transition requires

  1. A cautionary approach in transitioning to 'green' energy technologies and practices is required.

    Science.gov (United States)

    Matatiele, Puleng; Gulumian, Mary

    2016-06-01

    Renewable energy technologies (wind turbines, solar cells, biofuels, etc.) are often referred to as 'clean' or 'green' energy sources, while jobs linked to the field of environmental protection and energy efficiency are referred to as 'green' jobs. The energy efficiency of clean technologies, which is likely to reduce and/or eliminate reliance on fossil fuels, is acknowledged. However, the potential contribution of green technologies and associated practices to ill health and environmental pollution resulting from consumption of energy and raw materials, generation of waste, and the negative impacts related to some life cycle phases of these technologies are discussed. Similarly, a point is made that the green jobs theme is mistakenly oversold because the employment opportunities generated by transitioning to green technologies are not necessarily safe and healthy jobs. Emphasis is put on identifying the hazards associated with these green designs, assessing the risks to the environment and worker health and safety, and either eliminating the hazards or minimizing the risks as essential elements to the design, construction, operation, and maintenance of green technologies. The perception that it is not always economically possible to consider all risk factors associated with renewable energy technologies at the beginning without hampering their implementation, especially in the poor developing countries, is dismissed. Instead, poor countries are encouraged to start implementing environmentally sound practices while transitioning to green technologies in line with their technological development and overall economic growth.

  2. Closed Nuclear Fuel Cycle Technologies to Meet Near-Term and Transition Period Requirements

    International Nuclear Information System (INIS)

    Collins, E.D.; Felker, L.K.; Benker, D.E.; Campbell, D.O.

    2008-01-01

    A scenario that very likely fits conditions in the U.S. nuclear power industry and can meet the goals of cost minimization, waste minimization, and provisions of engineered safeguards for proliferation resistance, including no separated plutonium, to close the fuel cycle with full actinide recycle is evaluated. Processing aged fuels, removed from the reactor for 30 years or more, can provide significant advantages in cost reduction and waste minimization. The UREX+3 separations process is being developed to separate used fuel components for reuse, thus minimizing waste generation and storage in geologic repositories. Near-term use of existing and new thermal spectrum reactors can be used initially for recycle actinide transmutation. A transition period will eventually occur, when economic conditions will allow commercial deployment of fast reactors; during this time, recycled plutonium can be diverted into fast reactor fuel and conversion of depleted uranium into additional fuel material can be considered. (authors)

  3. Closed Nuclear Fuel Cycle Technologies to Meet Near-Term and Transition Period Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Collins, E.D.; Felker, L.K.; Benker, D.E.; Campbell, D.O. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, Tennessee, 37831-6152 (United States)

    2008-07-01

    A scenario that very likely fits conditions in the U.S. nuclear power industry and can meet the goals of cost minimization, waste minimization, and provisions of engineered safeguards for proliferation resistance, including no separated plutonium, to close the fuel cycle with full actinide recycle is evaluated. Processing aged fuels, removed from the reactor for 30 years or more, can provide significant advantages in cost reduction and waste minimization. The UREX+3 separations process is being developed to separate used fuel components for reuse, thus minimizing waste generation and storage in geologic repositories. Near-term use of existing and new thermal spectrum reactors can be used initially for recycle actinide transmutation. A transition period will eventually occur, when economic conditions will allow commercial deployment of fast reactors; during this time, recycled plutonium can be diverted into fast reactor fuel and conversion of depleted uranium into additional fuel material can be considered. (authors)

  4. DARK Technology Transition Plan

    Science.gov (United States)

    1990-04-01

    handicap in violation of Title VI of the Civil Rights Act of 1964. Title IX of the Educational Amendments of 1972 and Section 504 of the...to make productive use of the technology. Note that, for those technologies where commercialisation would be a prerequisite for institutionalisation...leverage, and nurture the ensuing transition activities (e.g., as a resource) as much as possible. This is where commercialisation would give a boost

  5. Technology Transition for Hybrid Warfare

    Science.gov (United States)

    2010-02-16

    and Iraq. At the same time, the science and technology base must provide the disruptive technologies to defeat future conventional enemies. This... disruptive technologies will be needed to retain long-term technological superiority in conventional warfare. Incremental improvement is the most...technology to be missed. Disruptive technologies are the second type of technological change and involve revolutionary concepts involving large technological

  6. Recombinant innovation and endogenous technological transitions

    NARCIS (Netherlands)

    Frenken, K.; Izquierdo, L.R.; Zeppini, P.

    2012-01-01

    We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

  7. Fusion technology status and requirements

    International Nuclear Information System (INIS)

    Thomassen, K.I.

    1982-01-01

    This paper summarizes the status of fusion technology and discusses the requirements to be met in order to build a demonstration fusion plant. Strategies and programmatic considerations in pursuing engineering feasibility are also outlined

  8. Evaluation of automated vehicle technology for transit.

    Science.gov (United States)

    2015-01-01

    The purpose of this report is to provide an overview of the state of automated vehicle (AV) technology : in transit. The Florida Department of Transportation (FDOT) wishes to know what AV technology is : currently available that could be used in tran...

  9. Technology Requirements for Information Management

    Science.gov (United States)

    Graves, Sara; Knoblock, Craig A.; Lannom, Larry

    2002-01-01

    This report provides the results of a panel study conducted into the technology requirements for information management in support of application domains of particular government interest, including digital libraries, mission operations, and scientific research. The panel concluded that it was desirable to have a coordinated program of R&D that pursues a science of information management focused on an environment typified by applications of government interest - highly distributed with very large amounts of data and a high degree of heterogeneity of sources, data, and users.

  10. Some mechanistic requirements for major transitions.

    Science.gov (United States)

    Schuster, Peter

    2016-08-19

    Major transitions in nature and human society are accompanied by a substantial change towards higher complexity in the core of the evolving system. New features are established, novel hierarchies emerge, new regulatory mechanisms are required and so on. An obvious way to achieve higher complexity is integration of autonomous elements into new organized systems whereby the previously independent units give up their autonomy at least in part. In this contribution, we reconsider the more than 40 years old hypercycle model and analyse it by the tools of stochastic chemical kinetics. An open system is implemented in the form of a flow reactor. The formation of new dynamically organized units through integration of competitors is identified with transcritical bifurcations. In the stochastic model, the fully organized state is quasi-stationary whereas the unorganized state corresponds to a population with natural selection. The stability of the organized state depends strongly on the number of individual subspecies, n, that have to be integrated: two and three classes of individuals, [Formula: see text] and [Formula: see text], readily form quasi-stationary states. The four-membered deterministic dynamical system, [Formula: see text], is stable but in the stochastic approach self-enhancing fluctuations drive it into extinction. In systems with five and more classes of individuals, [Formula: see text], the state of cooperation is unstable and the solutions of the deterministic ODEs exhibit large amplitude oscillations. In the stochastic system self-enhancing fluctuations lead to extinction as observed with [Formula: see text] Interestingly, cooperative systems in nature are commonly two-membered as shown by numerous examples of binary symbiosis. A few cases of symbiosis of three partners, called three-way symbiosis, have been found and were analysed within the past decade. Four-way symbiosis is rather rare but was reported to occur in fungus-growing ants. The model

  11. Technological Change during the Energy Transition

    NARCIS (Netherlands)

    van der Meijden, G.C.; Smulders, J.A.

    2014-01-01

    The energy transition from fossil fuels to alternative energy sources has important consequences for technological change and resource extraction. We examine these consequences by incorporating a non-renewable resource and an alternative energy source in a market economy model of endogenous growth

  12. TECHNOLOGICAL CHANGE during the ENERGY TRANSITION

    NARCIS (Netherlands)

    van der Meijden, Gerard; Smulders, Sjak

    2018-01-01

    The energy transition from fossil fuels to alternative energy sources has important consequences for technological change and resource extraction. We examine these consequences by incorporating a nonrenewable resource and an alternative energy source in a market economy model of endogenous growth

  13. Technological Change During the Energy Transition

    NARCIS (Netherlands)

    van der Meijden, G.C.; Smulders, Sjak A.

    2014-01-01

    The energy transition from fossil fuels to alternative energy sources has important consequences for technological change and resource extraction. We examine these consequences by incorporating a non-renewable resource and an alternative energy source in a market economy model of endogenous growth

  14. Hydrogen tomorrow: Demands and technology requirements

    Science.gov (United States)

    1975-01-01

    National needs for hydrogen are projected and the technologies of production, handling, and utilization are evaluated. Research and technology activities required to meet the projected needs are determined.

  15. Transitioning Unmanned Technologies for Earth Science Applications

    Science.gov (United States)

    Wardell, L. J.; Douglas, J.

    2008-12-01

    Development of small unmanned aerial systems (UAS) has progressed dramatically in recent years along with miniaturization of sensor technology. This confluence of development paths has resulted in greater capability in smaller, less expensive platforms allowing research to be performed where manned airborne platforms are impractical or dangerous. Recent applications include small UAS for studies involving hurricanes, volcanic activity, sea ice changes, glacier melt, biological monitoring of land and sea species, wildfire monitoring, and others. However, the majority of UAS employed in these investigations were originally developed for non-civilian applications and many of the required interfaces are locked behind proprietary specifications, requiring expensive customization by the manufacturer to transform a military UAS into one suitable for civilian work. A small UAS for scientific research should be standards-based, low-cost, user friendly, field serviceable, and be designed to accept a range of payloads. The AV8R UAS is one example of an unmanned system that has been developed for specific application to earth observation missions. This system is designed to be operated by the user with difficult environmental conditions and field logistics in mind. Numerous features and innovations that advance this technology as a research tool as well as its planned science missions will be presented. Most importantly, all interfaces to the system required for successful design and integration of various payloads will be openly available. The environment of open, standards based development allow the small technologies companies that serve as the backbone for much of the technology development to participate in the rapid development of industry capabilities. This is particularly true with UAS technologies. Programs within the USA such as the STTR foster collaborations with small businesses and university researchers. Other innovations related to autonomous unmanned systems

  16. Internet technologies and requirements for telemedicine

    Science.gov (United States)

    Lamaster, H.; Meylor, J.; Meylor, F.

    1997-01-01

    Internet technologies are briefly introduced and those applicable for telemedicine are reviewed. Multicast internet technologies are described. The National Aeronautics and Space Administration (NASA) 'Telemedicine Space-bridge to Russia' project is described and used to derive requirements for internet telemedicine. Telemedicine privacy and Quality of Service (QoS) requirements are described.

  17. Smart gun technology requirements preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.; Brandt, D.J.; Tweet, K.D.

    1995-05-01

    Goal of the Smart Gun Technology project is to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing user-recognizing-and-authorizing surety technologies. This project is funded by the National Institute of Justice. This document reports the projects first objective: to find and document the requirements for a user-recognizing-and-authorizing firearm technology that law enforcement officers will value. This report details the problem of firearm takeaways in law enforcement, the methodology used to develop the law enforcement officers` requirements, and the requirements themselves.

  18. Branching innovation, recombinant innovation, and endogenous technological transitions

    NARCIS (Netherlands)

    Frenken, K.; Izquierdo, L.; Zeppini, P.

    2012-01-01

    We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

  19. Decommissioning of reactor facilities (2). Required technology

    International Nuclear Information System (INIS)

    Yanagihara, Satoshi

    2014-01-01

    Decommissioning of reactor facilities was planned to perform progressive dismantling, decontamination and radioactive waste disposal with combination of required technology in a safe and economic way. This article outlined required technology for decommissioning as follows: (1) evaluation of kinds and amounts of residual radioactivity of reactor facilities with calculation and measurement, (2) decontamination technology of metal components and concrete structures so as to reduce worker's exposure and production of radioactive wastes during dismantling, (3) dismantling technology of metal components and concrete structures such as plasma arc cutting, band saw cutting and controlled demolition with mostly remote control operation, (3) radioactive waste disposal for volume reduction and reuse, and (4) project management of decommissioning for safe and rational work to secure reduction of worker's exposure and prevent the spreading of contamination. (T. Tanaka)

  20. SIW based multilayer transition and power divider in LTCC technology

    KAUST Repository

    Abuzaid, Hattan; Doghri, Ali; Wu, Ke; Shamim, Atif

    2013-01-01

    A multilayer transition and balanced power divider are presented for millimeter-wave system-on-package (SoP). These two components operate at Ka-band and exploit the substrate integrate waveguide (SIW) technology with its shielding characteristics

  1. Acquisition Modernization: Transitioning Technology Into Warfighter Capability

    Science.gov (United States)

    2011-08-01

    to test and evaluate the technology and integrate the new capability into operational weapon systems (Figure 4). This funding model creates stove...misalignment between missions, TRLs, and the RDT&E funding model is a major 11 contributor to the valley of death. Technologies become obsolete on... funding model of the acquisition system. Create an individual budget account to fund the development of promising technologies. The Acquisition

  2. Parts Obsolescence Management Technology Transition (POMTT)

    National Research Council Canada - National Science Library

    Darling, David R; Cirillo, Tom; Fuller, Doug; Herald, Tom; Green, Jamie

    2004-01-01

    .... Tools, technologies, and methodologies were established and funded; and follow-on pilot demonstration programs were also established to evaluate the performance and commercial viability of these tools.

  3. Nuclear power strategy: requirements for technology

    International Nuclear Information System (INIS)

    Orlov, V.V.; Rachkov, V.I.

    2001-01-01

    The possible role of nuclear power in sustainable development demands answers to at least three questions: Is large-scale nuclear power essential to future development? - Is it feasible to have modern nuclear power transformed for large-scale deployment? - When will large-scale nuclear power be practically needed? The questions are analysed with the requirements to be fulfilled concerning present-day technologies

  4. Man-machine interface requirements - advanced technology

    Science.gov (United States)

    Remington, R. W.; Wiener, E. L.

    1984-01-01

    Research issues and areas are identified where increased understanding of the human operator and the interaction between the operator and the avionics could lead to improvements in the performance of current and proposed helicopters. Both current and advanced helicopter systems and avionics are considered. Areas critical to man-machine interface requirements include: (1) artificial intelligence; (2) visual displays; (3) voice technology; (4) cockpit integration; and (5) pilot work loads and performance.

  5. Transit signal priority with connected vehicle technology.

    Science.gov (United States)

    2014-01-01

    A new TSP logic was proposed, taking advantage of the resources provided by Connected Vehicle (CV) : technology, including two-way communication between the bus and the traffic signal controller, accurate bus : location detection and prediction, and ...

  6. Long-Term Stewardship Science and Technology Requirements

    International Nuclear Information System (INIS)

    McDonald, J.K.; Nickelson, R.A.

    2002-01-01

    To ensure technology developed for long-term stewardship will meet existing requirements, a review of requirements was performed. In addition to identifying existing science and technology related requirements, gaps and conflicts of requirements were identified

  7. Technologies and Species Transitions: Polanyi, on a Path to Posthumanity?

    Science.gov (United States)

    Doede, Robert

    2011-01-01

    Polanyi and Transhumanism both place technologies in pivotal roles in bringing about "Homo sapiens"' species transitions. The question is asked whether Polanyi's emphasis on the role of technology in "Homo sapiens"' rise out of mute beasthood indicates that he might have been inclined to embrace the Transhumanist vision of "Homo sapiens"'…

  8. Tritium extraction technologies and DEMO requirements

    Energy Technology Data Exchange (ETDEWEB)

    Demange, D., E-mail: david.demange@kit.edu [Karlsruhe Institute of Technology, Institute for Technical Physics, Tritium Laboratory Karlsruhe, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Antunes, R.; Borisevich, O.; Frances, L. [Karlsruhe Institute of Technology, Institute for Technical Physics, Tritium Laboratory Karlsruhe, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Rapisarda, D. [Laboratorio Nacional de Fusión, EURATOM-CIEMAT, 28040 Madrid (Spain); Santucci, A. [ENEA for EUROfusion, Via E. Fermi 45, 00044 Frascati, Roma (Italy); Utili, M. [ENEA CR Brasimone, 40032 Camugnano, BO (Italy)

    2016-11-01

    Highlights: • We detail the R&D plan for tritium technology of the European DEMO breeding blanket. • We study advanced and efficient extraction techniques to improve tritium management. • We consider inorganic membranes and catalytic membrane reactor for solid blankets. • We consider permeator against vacuum and vacuum sieve tray for liquid blankets. - Abstract: The conceptual design of the tritium extraction system (TES) for the European DEMO reactor is worked out in parallel for four different breeding blankets (BB) retained by EUROfusion. The TES design has to be tackled in an integrated manner optimizing the synergy with the directly interfacing inner fuel cycle, while minimizing the tritium permeation into the coolant. Considering DEMO requirements, it is most likely that only advanced technologies will be suitable for the tritium extraction systems of the BB. This paper overviews the European work programme for R&D on tritium technology for the DEMO BB, summaries the general first outcomes, and details the specific and comprehensive R&D program to study experimentally immature but promising technologies such as vacuum sieve tray or permeator against vacuum for tritium extraction from PbLi, and advanced inorganic membranes and catalytic membrane reactor for tritium extraction from He. These techniques are simple, fully continuous, likely compact with contained energy consumption. Several European Laboratories are joining their efforts to deploy several new experimental setups to accommodate the tests campaigns that will cover small scale experiments with tritium and inactive medium scale tests so as to improve the technology readiness level of these advanced processes.

  9. System and prospects of China's intercity rail transit technology

    Science.gov (United States)

    Gong, Ming

    2018-06-01

    City clusters and metropolitan areas in China are flourishing in the midst of the deepening urbanization in the country, thereby resulting in the emergence of intercity rail transit. Intercity railways connect mainline and urban railways for an integrated regional transportation system that underpins and leads the development of city clusters and metropolitan areas. This study explores the development mode and service characteristics of intercity rail transit, as well as proposes overviews on this system and prospects of its future technology in China.

  10. Lessons Learned in Technology Transition (Briefing Charts)

    Science.gov (United States)

    2011-02-01

    recertification • Environmental regulations • Federal clean air act • OSHA and EPA requirements – Cadmium, hexavalent chromium, VOC reduction • ReaCH Copyright...Efforts • Non-Chromated Exterior System Non-chromated conversion coat and primer • Non- Chrome for other areas • Chemical topcoat reactivation Future

  11. 19 CFR 122.117 - Requirements for transit air cargo transport.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Requirements for transit air cargo transport. 122... Requirements for transit air cargo transport. (a) Transportation—(1) Port to port. Transit air cargo may be... surface carrier for transport. Otherwise, all shipments on the transit air cargo manifest shall be...

  12. Visual Enhancements: Improving Deaf Students' Transition Skills Using Multimedia Technology.

    Science.gov (United States)

    Davis, Cheryl D.

    1999-01-01

    Discusses developments in technology that provide high-quality visual access to transition information and multimedia instruction for learners with deafness. Identifies a variety of considerations in using multimedia products and describes the pros and cons of different media in the context of several multimedia projects. (Author/CR)

  13. Nuclear imaging technology and global requirements

    International Nuclear Information System (INIS)

    Lele, R.D.

    1991-01-01

    After a brief review of the present state of availability of nuclear medicine services in the countries of world, a mention has been made of WHO programme on nuclear medicine. Nuclear medicine services in the developing countries are dependent on the availability of appropriate instrumentation and radiopharmaceuticals at affordable costs and existence of basic infrastructure required for giving such services. Basic infrastructure requirements are stable power supplies, air-conditioning systems, preventive maintenance and repair facilities. These are discussed. It is pointed out that the use of rectilinear scanners with 113m In instead of costly gamma cameras is still relevant in the third world countries. Need to develop a too low-cost gamma camera is emphasized. Electronics Corporation of India Ltd has plans to manufacture such cameras. Design of this camera is described. Foreign collaboration or technology transfer through concerned governement department needs to be explored so that the benefits of nuclear medicine can be brought to the third world countries by 2000 AD. (M.G.B.). 2 tabs

  14. Application Analysis of BIM Technology in Metro Rail Transit

    Science.gov (United States)

    Liu, Bei; Sun, Xianbin

    2018-03-01

    With the rapid development of urban roads, especially the construction of subway rail transit, it is an effective way to alleviate urban traffic congestion. There are limited site space, complex resource allocation, tight schedule, underground pipeline complex engineering problems. BIM technology, three-dimensional visualization, parameterization, virtual simulation and many other advantages can effectively solve these technical problems. Based on the project of Shenzhen Metro Line 9, BIM technology is innovatively researched throughout the lifecycle of BIM technology in the context of the metro rail transit project rarely used at this stage. The model information file is imported into Navisworks for four-dimensional animation simulation to determine the optimum construction scheme of the shield machine. Subway construction management application platform based on BIM and private cloud technology, the use of cameras and sensors to achieve electronic integration, dynamic monitoring of the operation and maintenance of underground facilities. Make full use of the many advantages of BIM technology to improve the engineering quality and construction efficiency of the subway rail transit project and to complete the operation and maintenance.

  15. Technology requirement for Halal quality control | Husny | Journal of ...

    African Journals Online (AJOL)

    Technology requirement for Halal quality control. ... Findings show that each industry segments have different technology characteristics preference. ... Keywords: halal industry, quality control; technology assistance; food and beverage; ...

  16. 29 CFR 1615.135 - Electronic and information technology requirements.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing, procuring...

  17. SIW based multilayer transition and power divider in LTCC technology

    KAUST Repository

    Abuzaid, Hattan

    2013-06-01

    A multilayer transition and balanced power divider are presented for millimeter-wave system-on-package (SoP). These two components operate at Ka-band and exploit the substrate integrate waveguide (SIW) technology with its shielding characteristics and the Low-temperature co-fired ceramics (LTCC) technology for its high density integration. A coupling slot has been used to perform vertical integration, which can be easily optimized through its length. The measured input return loss within the bandwidth of interest (32 GHz-38 GHz) is less than -15 dB and -18 dB for the multilayer transition and the power divider, respectively. The lateral dimensions of a multilayer system, such as a feed network of an array, can be greatly reduced by employing these 3D slot-coupled components. © 2013 IEEE.

  18. Technology Sourcing and a 'Creative Transition' in Subsidiaries

    DEFF Research Database (Denmark)

    Papanastassiou, Marina; Pearce, Robert; Zhang, Si

    2012-01-01

    The paper focuses on a ‘creative transition' (CT) as a crucial tipping point in the strategic evolution of MNE subsidiaries. Before a CT a subsidiary's operations will be based around application (in a market-seeking or efficiency-seeking strategy) of the successful established technologies...... the dominant imperative. But, contrary to traditional Product Mandates, a major strand of this innovation targets an embedded position in China's growth for MNEs....

  19. Scenarios for a urban energy transition. Actors, regulations, technologies

    International Nuclear Information System (INIS)

    Debizet, Gilles; Blanco, Sylvie; Buclet, Nicolas; Forest, Fabrice; Gauthier, Caroline; La Branche, Stephane; Menanteau, Philippe; Schneuwly, Patrice; Tabourdeau, Antoine

    2016-01-01

    Cities concentrate populations, consumptions, levers of actions, and are places of various experiments for energy transition. This book aims at giving an overview of possible scenarios of development of renewable energies in urban context. It is based on interviews of actors of the energy, building and urban planning sectors by researchers in town planning, management, technology, political and economic sciences. The authors examine what would occur if large companies would manage entire quarters, if local authorities would supervise production and supply, if the State would take control of all fields of action again, or if consumer cooperatives would exchange energy and pool productions. In its different chapters, the book presents four scenarios of energy coordination in urban context by 2040, discuss energy transition in urban spaces, discuss the perspectives of evolution towards more autonomous cities and quarters from an energetic point of view, and discuss business models and urban energetic innovations

  20. Requirements Engineering and Design Technology Report

    National Research Council Canada - National Science Library

    Ganska, Ralph

    1995-01-01

    This report reviews the STSC's recommendations for the selection and usage of software engineering products aimed at the requirements analysis and high-level design portions of the software lifecycle...

  1. Health information technology: transforming chronic disease management and care transitions.

    Science.gov (United States)

    Rao, Shaline; Brammer, Craig; McKethan, Aaron; Buntin, Melinda B

    2012-06-01

    Adoption of health information technology (HIT) is a key effort in improving care delivery, reducing costs of health care, and improving the quality of health care. Evidence from electronic health record (EHR) use suggests that HIT will play a significant role in transforming primary care practices and chronic disease management. This article shows that EHRs and HIT can be used effectively to manage chronic diseases, that HIT can facilitate communication and reduce efforts related to transitions in care, and that HIT can improve patient safety by increasing the information available to providers and patients, improving disease management and safety. Copyright © 2012 Elsevier Inc. All rights reserved.

  2. Transition of the Course Programs in the 40 Years History of Hitachi Institute of Technology

    Science.gov (United States)

    Miura, Osamu; Katsura, Koyo; Takahashi, Masahiko

    In 2010, the Hitachi Institute of Technology reached the 40th anniversary. In the beginning, the institute stood at the product-out-oriented view point and carried out extensive technical education from basis to advanced technology. After the 1990s, transition of the business environment with the globalization caused that the needs of the engineer education required by the business sections have been transformed. As the result, the changes of needs have been reflected for course program of the institute. Nowadays, in addition to the conventional course programs, the engineer education programs for the business competency and human skill have also been focused.

  3. 10 CFR 73.37 - Requirements for physical protection of irradiated reactor fuel in transit.

    Science.gov (United States)

    2010-01-01

    ... fuel in transit. 73.37 Section 73.37 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.37 Requirements for physical protection of irradiated reactor fuel in transit. (a) Performance objectives. (1...

  4. 42 CFR 403.822 - Reimbursement of transitional assistance and associated sponsor requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Reimbursement of transitional assistance and associated sponsor requirements. 403.822 Section 403.822 Public Health CENTERS FOR MEDICARE & MEDICAID... Prescription Drug Discount Card and Transitional Assistance Program § 403.822 Reimbursement of transitional...

  5. Information technology deployment in a transition economy: Results from Slovenia

    Directory of Open Access Journals (Sweden)

    Hovelja Tomaž

    2009-01-01

    Full Text Available Information technology (IT is increasingly establishing itself as one of the major topics of study in the OECD area. The resulting OECD studies found that IT has an enormous productive potential; however before an economy can gain most of IT's benefits, several challenges need to be successfully addressed. The key challenges these studies identified are adequate organizational transformations of the enterprises and adequate reorganization of key national institutions. How these two challenges are tackled by the economies that are going through the transition from a socialist towards a coordinated/liberal market economy is, unfortunately, not equally well documented. To improve this situation in this paper I present new findings from one transition economy concerning the issues that the developed OECD countries already highlighted as critical for the successful deployment of IT, and issues that seem specific to the transition environments. The presented findings are based on the study I conducted into 94 enterprises, representing the population of the 914 biggest added value generating enterprises in Slovenia. This article thus tries to allow Slovenia and other economies in a similar situation to draw broad and important conclusions with managerial and political implications on how to deploy all available IT potential.

  6. Digital video technologies and their network requirements

    Energy Technology Data Exchange (ETDEWEB)

    R. P. Tsang; H. Y. Chen; J. M. Brandt; J. A. Hutchins

    1999-11-01

    Coded digital video signals are considered to be one of the most difficult data types to transport due to their real-time requirements and high bit rate variability. In this study, the authors discuss the coding mechanisms incorporated by the major compression standards bodies, i.e., JPEG and MPEG, as well as more advanced coding mechanisms such as wavelet and fractal techniques. The relationship between the applications which use these coding schemes and their network requirements are the major focus of this study. Specifically, the authors relate network latency, channel transmission reliability, random access speed, buffering and network bandwidth with the various coding techniques as a function of the applications which use them. Such applications include High-Definition Television, Video Conferencing, Computer-Supported Collaborative Work (CSCW), and Medical Imaging.

  7. Participating to the Transition Towards New Energy Technology Systems

    International Nuclear Information System (INIS)

    Tosato, G.

    2008-01-01

    The paper analyses possible implications for Croatia of a global transition towards new energy technology systems, as depicted by the recent report on scenarios and strategies to 2050 of the International Energy Agency [ETP2008]. The analysis is based upon the present Croatian energy balance. It takes into account some draft results of the USAID-supported Regional Energy Demand Planning (REDP) study under the South East Europe Regional Energy Market Support (SEE REMS) Project. The paper then presents ongoing EC-funded energy research projects, such as RES2020 (Monitoring and Evaluation of the Renewable Energy Sources directives implementation in EU27 and policy recommendations for 2020), REACCESS (Risk of Energy Availability: Common Corridors for Europe Supply Security) and REALISEGRID (REseArch, methodoLogIes and technologieS for the effective development of pan-European key GRID infrastructures to support the achievement of a reliable, competitive and sustainable electricity supply). The participation of Croatian research organizations to EC-funded research projects could make the transition towards new energy system an opportunity for economic development.(author)

  8. 48 CFR 311.7000 - Defining electronic information technology requirements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that define...

  9. Smart grid standards specifications, requirements, and technologies

    CERN Document Server

    Sato, Takuro; Duan, Bin; Macuha, Martin; Zhou, Zhenyu; Wu, Jun; Tariq, Muhammad; Asfaw, Solomon A

    2015-01-01

    With numerous existing Smart Grid standards, it is clear that governments and industrial organizations world-wide have understood and acknowledged the critical role they play. This timely book is a useful guide for Smart Grid professionals in easily classifying fundamental Smart Grid standards, and to quickly find the building blocks they need to analyse and implement a Smart Grid system. The standards are organized in a systematic manner that aids identification, according to grid requirements. It also covers broader Smart Grid areas including, but not limited to, the following: A fully c

  10. Technological implications of fusion power: requirements and status

    International Nuclear Information System (INIS)

    Steiner, D.

    1978-01-01

    The major technological requirements for fusion power, as implied by current conceptual designs of fusion power plants, are identified and assessed relative to the goals of existing technology programs. The focus of the discussion is on the tokamak magnetic confinement concept; however, key technological requirements of mirror magnetic confinement systems and of inertial confinement concepts will also be addressed. The required technology is examined on the basis of three general areas of concern: (a) the power balance, that is, the unique power handling requirements associated with the production of electrical power by fusion; (b) reactor design, focusing primarily on the requirements imposed by a tritium-based fuel cycle, thermal hydraulic considerations, and magnet systems; and (c) materials considerations, including radiation damage effects, neutron-induced activation, and resource limitations

  11. Industry-Oriented Competency Requirements for Mechatronics Technology in Taiwan

    Science.gov (United States)

    Shyr, Wen-Jye

    2012-01-01

    This study employed a three-phase empirical method to identify competency indicators for mechatronics technology according to industry-oriented criteria. In Phase I, a list of required competencies was compiled using Behavioral Event Interviews (BEI) with three engineers specializing in the field of mechatronics technology. In Phase II, the Delphi…

  12. Remote maintenance for fusion: Requirements vs technology gap

    International Nuclear Information System (INIS)

    Davis, F.C.; Kuban, D.P.

    1989-01-01

    Today's remote handling technology was developed in response to the remote maintenance (RM) requirements of the fission community's nuclear fuel recycle process. The needs of the fusion community present new challenges to the remote handling experts of the world. New difficulties are superimposed on the difficulties experienced in maintaining fission processes. Today's technology must be enhanced to respond to the RM needs of these future huge investments. This paper first discusses the current RM needs for fusion based on existing facilities and designs of future machines. It then exposes the gap between these requirements and existing RM technology and recommends ways to extend the state of the art to close this gap

  13. A Transitive Recommendation System for Information Technology Communities

    Directory of Open Access Journals (Sweden)

    Hesham Ali

    2013-06-01

    Full Text Available Social networks have become a new trend for research among computer scientist around the world. Social network had an impact on users' way of life. One of social network usages is recommendation systems. The need of recommendation systems is arising when users try to know best choice for them in many items types (books, experts, locations, technologies...etc. The problem is that a single person can't try all alternatives in all possibles life goals to compare. Thus, a person has to use his friends' expertise to select better option in any item category. This process is the main idea of “Recommendation Systems”. Recommendation systems usually depend on users-to-items ratings in a network (graph. Two main challenges for recommendation systems are accuracy of recommendation and computation size. The main objective of this paper is to introduce a suggested technique for transitive recommendation system based on users' collaborative ratings, and also to balance loading of computation. All this has to be applied on a special type of social network. Our work studied the transitivity usage in connections to get a relation (path as a recommendation for nodes not directly connected. The target social network has eight types of nodes. So, there are techniques that are not suitable to this complex type of network. Those we can present a new support for recommending items of several types to users with several types. We believe that this functionality hasn't been fully provided elsewhere. We have suggested using single source shortest path algorithm combined with Map Reduce technique, and mathematically deduced that we have a speeding up of algorithm by 10% approximately. Our testing results shows an accuracy of 89% and false rejection of 99% compared to traditional algorithms with less configuration parameters and more steady count of recommendations.

  14. Nuclear power technology requirements for NASA exploration missions

    International Nuclear Information System (INIS)

    Bloomfield, H.S.

    1990-01-01

    This paper discusses how future exploration of the Moon and Mars will mandate developments in many areas of technology. In particular, major advances will be required in planet surface power systems and space transportation systems. Critical nuclear technology challenges that can enable strategic self-sufficiency, acceptable operational costs and cost-effective space transportation goals for NASA exploration missions have been identified. Critical technologies for surface power systems include stationary and mobile nuclear reactor and radio-isotope heat sources coupled to static and dynamic power conversion devices. These technologies can provide dramatic reductions in mass leading to operational and transportation cost savings. Critical technologies for space transportation systems include nuclear thermal rocket and nuclear electric propulsion options which present compelling concepts for significantly reducing mass, cost or travel time required for Earth-Mars transport

  15. Wireless Technology Use Case Requirement Analysis for Future Space Applications

    Science.gov (United States)

    Abedi, Ali; Wilkerson, DeLisa

    2016-01-01

    This report presents various use case scenarios for wireless technology -including radio frequency (RF), optical, and acoustic- and studies requirements and boundary conditions in each scenario. The results of this study can be used to prioritize technology evaluation and development and in the long run help in development of a roadmap for future use of wireless technology. The presented scenarios cover the following application areas: (i) Space Vehicles (manned/unmanned), (ii) Satellites and Payloads, (iii) Surface Explorations, (iv) Ground Systems, and (v) Habitats. The requirement analysis covers two parallel set of conditions. The first set includes the environmental conditions such as temperature, radiation, noise/interference, wireless channel characteristics and accessibility. The second set of requirements are dictated by the application and may include parameters such as latency, throughput (effective data rate), error tolerance, and reliability. This report provides a comprehensive overview of all requirements from both perspectives and details their effects on wireless system reliability and network design. Application area examples are based on 2015 NASA Technology roadmap with specific focus on technology areas: TA 2.4, 3.3, 5.2, 5.5, 6.4, 7.4, and 10.4 sections that might benefit from wireless technology.

  16. Technological transitions as evolutionary configuration processes: A multi-level perspective and a case-study

    NARCIS (Netherlands)

    Geels, F.W.

    2002-01-01

    This paper addresses the question of how technological transitions (TT) come about? Are there particular patterns and mechanisms in transition processes? TT are defined as major, long-term technological changes in the way societal functions are fulfilled. TT do not only involve changes in

  17. Technological transitions as evolutionary reconfiguration processes: a multi-level perspective and a case study

    NARCIS (Netherlands)

    Geels, F.W.

    2002-01-01

    This paper addresses the question of how technological transitions (TT) come about? Are there particular patterns and mechanisms in transition processes? TT are defined as major, long-term technological changes in the way societal functions are fulfilled. TT do not only involve changes in

  18. 77 FR 7095 - Transitional Program for Covered Business Method Patents-Definition of Technological Invention

    Science.gov (United States)

    2012-02-10

    ... 0651-AC75 Transitional Program for Covered Business Method Patents-- Definition of Technological... definition of technological invention that the Board will use in conducting transitional covered business... definition for covered business method patent in proposed Sec. 42.301(a). Additionally, the Office in a...

  19. Emergence of controversy in technology transitions: Green revolution and Bt cotton in India

    NARCIS (Netherlands)

    Ramani, S.V.; Thutupalli, A.

    2015-01-01

    Technology transitions following radical technological breakthroughs are often marked by controversies and the transitions to Green Revolution (GR) and Genetically Modified (GM) seeds in India were no exceptions to this rule. Controversies can trigger social dilemmas, but in economics we do not yet

  20. Fuels from microalgae: Technology status, potential, and research requirements

    Energy Technology Data Exchange (ETDEWEB)

    Neenan, B.; Feinberg, D.; Hill, A.; McIntosh, R.; Terry, K.

    1986-08-01

    Although numerous options for the production of fuels from microalgae have been proposed, our analysis indicates that only two qualify for extensive development - gasoline and ester fuel. In developing the comparisons that support this conclusion, we have identified the major areas of microalgae production and processing that require extensive development. Technology success requires developing and testing processes that fully utilize the polar and nonpolar lipids produced by microalgae. Process designs used in these analyses were derived from fragmented, preliminary laboratory data. These results must be substantiated and integrated processes proposed, tested, and refined to be able to evaluate the commercial feasibility from microalgae. The production of algal feedstocks for processing to gasoline or ester fuel requires algae of high productivity and high lipid content that efficiently utilize saline waters. Species screening and development suggest that algae can achieve required standards taken individually, but algae that can meet the integrated requirements still elude researchers. Effective development of fuels from microalgae technology requires that R and D be directed toward meeting the integrated standards set out in the analysis. As technology analysts, it is inappropriate for us to dictate how the R and D effort should proceed to meet these standards. We end our role by noting that alternative approaches to meeting the feasibility targets have been identified, and it is now the task of program managers and scientists to choose the appropriate approach to assure the greatest likelihood of realizing a commercially viable technology. 70 refs., 39 figs., 35 tabs.

  1. Modeling the transition to a new economy: lessons from two technological revolutions

    OpenAIRE

    Andrew Atkeson; Patrick J. Kehoe

    2006-01-01

    Many view the period after the Second Industrial Revolution as a paradigmatic example of a transition to a new economy following a technological revolution and conjecture that this historical experience is useful for understanding other transitions, including that after the Information Technology Revolution. We build a model of diffusion and growth to study transitions. We quantify the learning process in our model using data on the life cycle of U.S. manufacturing plants. This model accounts...

  2. Redefining Requirements of Ancillary Services for Technology Agnostic Sources

    DEFF Research Database (Denmark)

    Bondy, Daniel Esteban Morales; MacDonald, Jason; Kara, Emre Can

    2018-01-01

    New sources for ancillary services are needed, yet the requirements for service provision in most countries are explicitly formulated for traditional generators. This leads to waste of the potential for new technologies to deliver ancillary services. In order to harness this potential, we propose...... to parameterize the requirements of ancillary services so that reserves can be built by combining the advantageous properties of different technologies. The proposal is exemplified through a laboratory test where it shown that the system needs can be covered through cheaper and smaller reserves....

  3. Long-Term Stewardship Program Science and Technology Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Joan McDonald

    2002-09-01

    Many of the United States’ hazardous and radioactively contaminated waste sites will not be sufficiently remediated to allow unrestricted land use because funding and technology limitations preclude cleanup to pristine conditions. This means that after cleanup is completed, the Department of Energy will have long-term stewardship responsibilities to monitor and safeguard more than 100 sites that still contain residual contamination. Long-term stewardship encompasses all physical and institutional controls, institutions, information, and other mechanisms required to protect human health and the environment from the hazards remaining. The Department of Energy Long-Term Stewardship National Program is in the early stages of development, so considerable planning is still required to identify all the specific roles and responsibilities, policies, and activities needed over the next few years to support the program’s mission. The Idaho National Engineering and Environmental Laboratory was tasked with leading the development of Science and Technology within the Long-Term Stewardship National Program. As part of that role, a task was undertaken to identify the existing science and technology related requirements, identify gaps and conflicts that exist, and make recommendations to the Department of Energy for future requirements related to science and technology requirements for long-term stewardship. This work is summarized in this document.

  4. 75 FR 52472 - Spectrum Requirements for Advanced Medical Technologies

    Science.gov (United States)

    2010-08-26

    ... medical devices. Under this framework, the rules for MedRadio service incorporates the MICS ``core'' band... Requirements for Advanced Medical Technologies AGENCY: Federal Communications Commission. ACTION: Final rule.... (Medtronic) regarding rules for the Medical Device Radiocommunication (MedRadio) service. The Commission...

  5. Technology Requirements For In Situ Decommissioning Workshop Report

    International Nuclear Information System (INIS)

    Jannik, T.; Lee, P.; Gladden, J.; Langton, C.; Serrato, M.; Urland, C.; Reynolds, E.

    2009-01-01

    In recognition of the increasing attention being focused on In Situ Decommissioning (ISD or entombment) as an acceptable and beneficial decommissioning end state, the Department of Energy's (DOE) Office of Environmental Management (EM) is developing guidance for the implementation of ISD of excess facilities within the DOE complex. Consistent with the overarching DOE goals for increased personnel and environmental safety, reduced technical uncertainties and risks, and overall gains in efficiencies and effectiveness, EM's Office of Deactivation and Decommissioning and Facility Engineering (EM-23) initiated efforts to identify the technical barriers and technology development needs for the optimal implementation of ISD. Savannah River National Laboratory (SRNL), as the EM Corporate Laboratory, conducted an ISD Technology Needs Workshop to identify the technology needs at DOE sites. The overall goal of the workshop was to gain a full understanding of the specific ISD technical challenges, the technologies available, and those needing development. The ISD Workshop was held December 9-10, 2008 in Aiken, SC. Experienced decommissioning operations personnel from Richland Operations Office (RL), Idaho National Laboratory (INL) and Savannah River Site (SRS) along with scientists and engineers specific expertise were assembled to identify incremental and 'game changing' solutions to ISD technology challenges. The workshop and follow-up activities yielded 14 technology needs statements and the recommendation that EM-23 prioritize and pursue the following specific technology development and deployment actions. For each action, the recommended technology acquisition mechanisms (competitive solicitation (CS) or direct funding (TCR)) are provided. Activities that are time critical for ISD projects, or require unique capabilities that reside in the DOE Laboratory system will be funded directly to those institutions. Activities that have longer lead times and where the private

  6. Transit's leading edge : innovations in service and technology : issue paper 7

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-11-01

    The Canadian Urban Transit Association is committed to raising awareness of the social, environmental and economic benefits of mass transit systems. Innovation is needed to address the challenges of attracting new riders, resolving fiscal imbalances, and meeting environmental concerns. This issue paper presents examples of how Canada's transit industry has used innovation to address the issue of climate change and fight smog. It includes a brief description of some of the ways that Canadian transit suppliers and transit systems are going green: Canada's bus builders are developing hybrid buses; Grand River Transit is improving air quality with clean diesel; Montreal's Transit Society is reducing emissions with biodiesel buses; Saskatoon Transit Service is using biodiesel buses; Laval's Transit Society is listening to customer complaints in an effort to reduce response times and improve customer service; Canadian Urban Transit Association is improving customer service; Transit Windsor is promoting a smog solution; Winnipeg Transit is working with employers to boost ridership; Trapeze Software Group is providing customers with quick and accurate trip itineraries; St. John's Transportation Commission has added solar-powered, light emitting diode illumination to bus stops; the City of Ottawa has an established transit priority measures; and, Infodev EDI Inc. has supplied automated high-technology solutions for passenger counting and vehicle location tracking to several Canadian transit systems. refs., figs.

  7. [Technological innovations in radiation oncology require specific quality controls].

    Science.gov (United States)

    Lenaerts, E; Mathot, M

    2014-01-01

    During the last decade, the field of radiotherapy has benefited from major technological innovations and continuously improving treatment efficacy, comfort and safety of patients. This mainly concerns the imaging techniques that allow 4D CT scan recording the respiratory phases, on-board imaging on linear accelerators that ensure perfect positioning of the patient for treatment and irradiation techniques that reduce very significantly the duration of treatment sessions without compromising quality of the treatment plan, including IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc therapy). In this context of rapid technological change, it is the responsibility of medical physicists to regularly and precisely monitor the perfect functioning of new techniques to ensure patient safety. This requires the use of specific quality control equipment best suited to these new techniques. We will briefly describe the measurement system Delta4 used to control individualized treatment plan for each patient treated with VMAT technology.

  8. Engineering Runtime Requirements-Monitoring Systems Using MDA Technologies

    Science.gov (United States)

    Skene, James; Emmerich, Wolfgang

    The Model-Driven Architecture (MDA) technology toolset includes a language for describing the structure of meta-data, the MOF, and a language for describing consistency properties that data must exhibit, the OCL. Off-the-shelf tools can generate meta-data repositories and perform consistency checking over the data they contain. In this paper we describe how these tools can be used to implement runtime requirements monitoring of systems by modelling the required behaviour of the system, implementing a meta-data repository to collect system data, and consistency checking the repository to discover violations. We evaluate the approach by implementing a contract checker for the SLAng service-level agreement language, a language defined using a MOF meta-model, and integrating the checker into an Enterprise JavaBeans application. We discuss scalability issues resulting from immaturities in the applied technologies, leading to recommendations for their future development.

  9. Technical requirement of experiments and facilities for fusion nuclear technology

    International Nuclear Information System (INIS)

    Abdou, M.; Tillak, M.; Gierszwski, P.; Grover, J.; Puigh, R.; Sze, D.K.; Berwald, D.

    1986-06-01

    The technical issues and requirements of experiments and facilities for fusion nuclear technology (FNT) have been investigated. The nuclear subsystems addressed are: a) blanket, b) radiation shield, c) tritium processing system, and d) plasma interactive components. Emphasis has been placed on the important and complex development problems of the blanket. A technical planning process for FNT has been developed and applied, including four major elements: 1) characterization of issues, 2) quantification of testing requirements, 3) evaluation of facilities, and 4) development of a test plan to identify the role, timing, characteristics and costs of major experiments and facilities

  10. US Export Controls and Technology Transfer Requirements: A UK Perspective

    Science.gov (United States)

    2010-05-01

    34 (La Franchi , 2006). Such requirements make it difficult for partners to participate and generate a large administrative burden on team members, who...if this critical impediment to enhanced cooperation is to be removed. The U.S. export control system is broken; its technology transfer rules ...Retrieved April 3, 2009, from http://www.jsf.mil/news/news2009.htm La Franchi , P. (2006, July 4). Australia demands JSF resolution. Flight International

  11. A Report on the Navy SBIR Program: Best Practices, Roadblocks and Recommendations for Technology Transition

    National Research Council Canada - National Science Library

    Bland, Erin; Busch, Dan; Clark, Al

    2008-01-01

    Over the past few years the Armed Services Committees have shown an increased interest in the DoD doing as much as possible to transition SBIR developed technologies into products or services that support the warfighter...

  12. Nuclear Thermal Propulsion (NTP): A Proven, Growth Technology for Fast Transit Human Missions to Mars

    Science.gov (United States)

    Borowski, Stanley K.; McCurdy, David R.; Packard, Thomas W.

    2014-01-01

    The "fast conjunction" long surface stay mission option was selected for NASA's recent Mars Design Reference Architecture (DRA) 5.0 study because it provided adequate time at Mars (approx. 540 days) for the crew to explore the planet's geological diversity while also reducing the "1-way" transit times to and from Mars to approx. 6 months. Short transit times are desirable in order to reduce the debilitating physiological effects on the human body that can result from prolonged exposure to the zero-gravity (0-gE) and radiation environments of space. Recent measurements from the RAD detector attached to the Curiosity rover indicate that astronauts would receive a radiation dose of approx. 0.66 Sv (approx. 66 rem)-the limiting value established by NASA-during their 1-year journey in deep space. Proven nuclear thermal rocket (NTR) technology, with its high thrust and high specific impulse (Isp approx. 900 s), can cut 1-way transit times by as much as 50 percent by increasing the propellant capacity of the Mars transfer vehicle (MTV). No large technology scale-ups in engine size are required for these short transit missions either since the smallest engine tested during the Rover program-the 25 klbf "Pewee" engine is sufficient when used in a clustered arrangement of three to four engines. The "Copernicus" crewed MTV developed for DRA 5.0 is a 0-gE design consisting of three basic components: (1) the NTP stage (NTPS); (2) the crewed payload element; and (3) an integrated "saddle truss" and LH2 propellant drop tank assembly that connects the two elements. With a propellant capacity of approx. 190 t, Copernicus can support 1-way transit times ranging from approx. 150 to 220 days over the 15-year synodic cycle. The paper examines the impact on vehicle design of decreasing transit times for the 2033 mission opportunity. With a fourth "upgraded" SLS/HLV launch, an "in-line" LH2 tank element can be added to Copernicus allowing 1-way transit times of 130 days. To achieve 100

  13. Understanding the Transition from School to University in Music and Music Technology

    Science.gov (United States)

    Winterson, Julia; Russ, Michael

    2009-01-01

    This article considers the transition from school to university in Music and Music Technology, continuing the discussion of transitional issues which began in Volume 2 of "Arts and Humanities in Higher Education". The focus of the article is a survey of undergraduates, examining areas that were key to their first experience of studying…

  14. Sustainable transition of socio-technological systems: How can Governance Network Research and Transition Theory contribute to the transition to biofuel for transportation?

    DEFF Research Database (Denmark)

    Hansen, Ole Erik; Stærdahl, Jens; Søndergård, Bent

    -technological systems, calling attention to how such governance structures emerge, stabilize and become dominant, which functions governance structures have to serve to become efficient, and how they can be made subject to deliberate and purposeful shaping and transition. Taking this approach, research in planning...

  15. Assessment of the impact of dipped guideways on urban rail transit systems: Ventilation and safety requirements

    Science.gov (United States)

    1982-01-01

    The ventilation and fire safety requirements for subway tunnels with dipped profiles between stations as compared to subway tunnels with level profiles were evaluated. This evaluation is based upon computer simulations of a train fire emergency condition. Each of the tunnel configurations evaluated was developed from characteristics that are representative of modern transit systems. The results of the study indicate that: (1) The level tunnel system required about 10% more station cooling than dipped tunnel systems in order to meet design requirements; and (2) The emergency ventilation requirements are greater with dipped tunnel systems than with level tunnel systems.

  16. From system requirements to source code: transitions in UML and RUP

    Directory of Open Access Journals (Sweden)

    Stanisław Wrycza

    2011-06-01

    Full Text Available There are many manuals explaining language specification among UML-related books. Only some of books mentioned concentrate on practical aspects of using the UML language in effective way using CASE tools and RUP. The current paper presents transitions from system requirements specification to structural source code, useful while developing an information system.

  17. Health-illness transition among persons using advanced medical technology at home.

    Science.gov (United States)

    Fex, Angelika; Flensner, Gullvi; Ek, Anna-Christina; Söderhamn, Olle

    2011-06-01

    This study aimed to elucidate meanings of health-illness transition experiences among adult persons using advanced medical technology at home. As an increasing number of persons perform self-care while using different sorts of advanced medical technology at home, knowledge about health-illness transition experiences in this situation may be useful to caregivers in supporting these patients. A qualitative design was used. Five women and five men, all of whom performed self-care at home, either using long-term oxygen therapy from a ventilator or oxygen cylinder, or performing peritoneal or haemodialysis, were interviewed. Ethics committee approval was obtained. Informed consent was received from all participants, and ethical issues concerning their rights in research were raised. The interviews were analysed using a phenomenological hermeneutical methodology, including both an inductive and a deductive structural analysis. This method offers possibilities to obtain an increased understanding by uncovering a deeper meaning of lived experiences through interviews transcribed as texts. The health-illness transition for adult persons in this context was found to mean a learning process of accepting, managing, adjusting and improving daily life with technology, facilitated by realizing the gain from technology at home. Further, the meaning of the health-illness transition experience was interpreted as contentment with being part of the active and conscious process towards transcending into a new state of living, in which the individual and the technology were in tune. The healthy transition experience was characterized by human growth and becoming. This study elucidates one meaning of health-illness transition experiences in relation to the use of advanced medical technology on a more generic level, independent of the specific type of technology used. A positive attitude towards technology at home facilitates the transition. © 2010 The Authors. Scandinavian Journal of

  18. Evaluation of automated vehicle technology for transit : [summary].

    Science.gov (United States)

    2014-01-01

    Automated transportation has been portrayed in : futuristic literature since the 19th century, but : making vehicles truly autonomous has only been : possible in recent decades with advanced control : and computer technologies. Automating cars is a :...

  19. Demonstration of artificial intelligence technology for transit railcar diagnostics

    Science.gov (United States)

    1999-01-01

    This report will be of interest to railcar maintenance professionals concerned with improving railcar maintenance fault-diagnostic capabilities through the use of artificial intelligence (AI) technologies. It documents the results of a demonstration ...

  20. Planning for Site Transition to Long-Term Stewardship: Identification of Requirements and Issues

    International Nuclear Information System (INIS)

    Banaee, J.

    2002-01-01

    A systematic methodology is presented and applied for the identification of requirements and issues pertaining to the planning for, and transition to, long term stewardship (LTS). The method has been applied to three of the twelve identified LTS functions. The results of the application of the methodology to contaminated and uncontaminated federal real property in those three functions are presented. The issues that could be seen as impediments to the implementation of LTS are also identified for the three areas under consideration. The identified requirements are significant and in some cases complex to implement. It is clear that early and careful planning is required in all circumstances

  1. Emergence of a phase transition for the required amount of storage in highly renewable electricity systems

    DEFF Research Database (Denmark)

    Jensen, Tue Vissing; Greiner, Martin

    2014-01-01

    -up of the required amount of storage, with renewable penetration being the control parameter and average relative storage filling level being the order parameter. A singularity appears for the required storage energy capacity at a renewable penetration determined by the parameters of the storage. For an ideal...... storage with no roundtrip losses the transition occurs at 100% renewable penetration. Moreover, the required storage energy capacity is strongly enhanced by temporal correlations on the synoptic weather time scale. A Markov process is proposed, which reproduces these findings....

  2. Planning for Site Transition to Long-Term Stewardship: Identification of Requirements and Issues

    Energy Technology Data Exchange (ETDEWEB)

    Banaee, J.

    2002-05-16

    A systematic methodology is presented and applied for the identification of requirements and issues pertaining to the planning for, and transition to, long term stewardship (LTS). The method has been applied to three of the twelve identified LTS functions. The results of the application of the methodology to contaminated and uncontaminated federal real property in those three functions are presented. The issues that could be seen as impediments to the implementation of LTS are also identified for the three areas under consideration. The identified requirements are significant and in some cases complex to implement. It is clear that early and careful planning is required in all circumstances.

  3. Planning for Site Transition to Long-Term Stewardship: Identification of Requirements and Issues

    Energy Technology Data Exchange (ETDEWEB)

    Banaee, Jila

    2002-08-01

    A systematic methodology is presented and applied for the identification of requirements and issues pertaining to the planning for, and transition to, long term stewardship (LTS). The method has been applied to three of the twelve identified LTS functions. The results of the application of the methodology to contaminated and uncontaminated federal real property in those three functions are presented. The issues that could be seen as impediments to the implementation of LTS are also identified for the three areas under consideration. The identified requirements are significant and in some cases complex to implement. It is clear that early and careful planning is required in all circumstances.

  4. Supporting robotics technology requirements through research in intelligent machines

    Energy Technology Data Exchange (ETDEWEB)

    Mann, R.C.

    1995-02-01

    {open_quotes}Safer, better, cheaper{close_quotes} are recurring themes in many robot development efforts. Significant improvements are being accomplished with existing technology, but basic research sets the foundations for future improvements and breakthrough discoveries. Advanced robots represent systems that integrate the three basic functions of sensing, reasoning, and acting (locomotion and manipulation) into one functional unit. Depending on the application requirements, some of these functions are implemented at a more or less advanced level than others. For example, some navigation tasks can be accomplished with purely reactive control and do not require sophisticated reasoning and planning methodologies. Robotics work at the Oak Ridge National Laboratory (ORNL) spans the spectrum from basic research to application-specific development and rapid prototyping of systems. This presentation summarizes recent highlights of the robotics research activities at ORNL.

  5. Recent Advances in Technologies Required for a ``Salad Machine''

    Science.gov (United States)

    Kliss, M.; Heyenga, A. G.; Hoehn, A.; Stodieck, L. S.

    Future long duration, manned space flight missions will require life support systems that minimize resupply requirements and ultimately approach self-sufficiency in space. Bioregenerative life support systems are a promising approach, but they are far from mature. Early in the development of the NASA Controlled Ecological Life Support System Program, the idea of onboard cultivation of salad-type vegetables for crew consumption was proposed as a first step away from the total reliance on resupply for food in space. Since that time, significant advances in space-based plant growth hardware have occurred, and considerable flight experience has been gained. This paper revisits the ``Salad Machine'' concept and describes recent developments in subsystem technologies for both plant root and shoot environments that are directly relevant to the development of such a facility

  6. Smoothing the Path: Technology Education and School Transition

    Science.gov (United States)

    Mawson, Brent

    2003-08-01

    The lack of coherence between early childhood education settings and primary school classrooms provides a challenge to the creation of a seamless educational experience in the period from birth to age eight. This paper examines the nature of technological activities in Kindergartens and New Entrant/Year One classes in New Zealand. It highlights commonalities between the two and discusses the potential for technology education to provide a bridge for children to ease their passage into the formal school setting and to provide a coherent educational experience.

  7. Technology requirements for commercial applications of inertial confinement fusion

    International Nuclear Information System (INIS)

    Frank, T.G.; Rossi, C.E.

    1981-01-01

    Current inertial confinement fusion (ICF) research is directed primarily at physics experiments intended to provide confidence in the scientific feasibility of the basic concept. In conjunction with these experiments, a variety of laser and particle beam drivers having potential for eventual use in fusion power plants is being developed. Expectations are that the scientific feasibility of ICF will be demonstrated in the latter part of the 1980s. At that time, the emphasis of the program will shift to engineering, economic, environmental, and licensing issues with the necessary technology development effort continuing into the early part of the next century. This paper discusses the technology requirements for the successive phases of engineering development leading to commercial application of ICF. The engineering areas requiring significant effort for ICF application include high average power driver development; pulsed high-energy power supply development; reactor cavity and heat transport system design; tritium extraction and control; commercial pellet development; pellet injection, tracking, and targeting systems design; materials radiation, fatigue, and corrosion behavior; and reactor plant systems integration and demonstration

  8. Educational Technology: Transitioning from Business Continuity to Mission Continuity

    Science.gov (United States)

    Mekdeci, Kelly Broyles

    2011-01-01

    United States schools and American Overseas (A/OS) schools depend upon educational technology (ET) to support business operations and student learning experiences. Schools rely upon administrative software, on-line course modules, information databases, digital communications systems, and many other ET processes. However, ET's fragility compared…

  9. Pedagogy with Information and Communications Technologies in Transition

    Science.gov (United States)

    Webb, Mary

    2014-01-01

    This paper presents an analysis of ways in which pedagogy with information and communications technologies (ICTs) may need to adapt to accommodate to a major shift in our conceptions of knowledge and learning. A holistic approach to this analysis based on Checkland's "systems thinking" suggested changes in pedagogy needed for 21st…

  10. Transitions in the wrong direction? Digital technologies and daily life

    DEFF Research Database (Denmark)

    Røpke, Inge; Christensen, Toke Haunstrup

    2013-01-01

    The environmental implications of information and communication technology (ICT) have been the subject of study since the early 1990s. Although previous research covers energy issues quite extensively, the treatment of the energy impacts of ICT integration in everyday life is still inadequate. Th...

  11. TECHNOLOGY TRANSFER NETWORKS ON PAPAYA PRODUCTION WITH TRANSITIONAL GROWERS

    Directory of Open Access Journals (Sweden)

    Octavio Cano-Reyes

    2012-11-01

    Full Text Available Social networks analysis applied to rural innovation processes becomes a very useful technology transfer tool, since it helps to understand the complexity of social relationships among people and/or institutions in their environment, and it also defines those innovation networks given in specific working groups or regions. This study was conducted from April to May 2011 to determine those networks and key players present in the group of growers associated as “Productora y Comercializadora de Papaya de Cotaxtla S.P.R. de R.L.”, that influence the technology transfer process in Cotaxtla, Veracruz, Mexico. Data were analyzed using UCINET 6 software. Three centrality measures were obtained: range, degree of mediation and closeness. Of 32 network players, 27 actively diffuse innovations according to their interests; alliances must be established with them to transfer technology. Four growers stand out as central actors, which along with the Instituto Nacional de Investigaciones Forestales Agricolas y Pecuarias, the Colegio de Postgraduados and the growers’ organization itself, could be the most appropriate actors to establish a technology transfer program to accelerate the diffusion and adoption of innovations. Wholesalers, middlemen and credit institutions do not participate in this process, but having capital they could be incorporated in the innovation diffusion process.

  12. Technology scale and supply chains in a secure, affordable and low carbon energy transition

    International Nuclear Information System (INIS)

    Hoggett, Richard

    2014-01-01

    Highlights: • Energy systems need to decarbonise, provide security and remain affordable. • There is uncertainty over which technologies will best enable this to happen. • A strategy to deal with uncertainty is to assess a technologies ability to show resilience, flexibility and adaptability. • Scale is important and smaller scale technologies are like to display the above characteristics. • Smaller scale technologies are therefore more likely to enable a sustainable, secure, and affordable energy transition. - Abstract: This research explores the relationship between technology scale, energy security and decarbonisation within the UK energy system. There is considerable uncertainty about how best to deliver on these goals for energy policy, but a focus on supply chains and their resilience can provide useful insights into the problems uncertainty causes. Technology scale is central to this, and through an analysis of the supply chains of nuclear power and solar photovoltaics, it is suggested that smaller scale technologies are more likely to support and enable a secure, low carbon energy transition. This is because their supply chains are less complex, show more flexibility and adaptability, and can quickly respond to changes within an energy system, and as such they are more resilient than large scale technologies. These characteristics are likely to become increasingly important in a rapidly changing energy system, and prioritising those technologies that demonstrate resilience, flexibility and adaptability will better enable a transition that is rapid, sustainable, secure and affordable

  13. Research of paste transition to substrate in LTCC-technology

    Science.gov (United States)

    Litunov, S. N.; Yurkov, V. Y.

    2018-01-01

    The electronics development demands for accuracy of printed technologies, in particular, to screen printing. Under a flat blade operation the print form is deformed and the image is distorted relative to the original. A squeegee in a form of a smooth cylinder reduces distortion, but it allows obtaining satisfactory print quality only when using high density grids. The paper shows findings of using roller squeegee with dosed ink supply. The roller squeegee is provided with an elastic layer. Dosage is carried out due to the cells on the elastic layer surface. There were used meshes 100-31 and 120-34 for the stencil. The experiments were carried out with layers of photopolymers and rubber. The carried out calculations made possible to choose the optimum printing pressure. Under the selected conditions, the printed image had minimal distortion. The findings allow drawing a conclusion about the possibility of roller squeegee using in chips manufacture according to LTCC-technology.

  14. A Software Technology Transition Entropy Based Engineering Model

    Science.gov (United States)

    2002-03-01

    Systems Basics, p273). (Prigogine 1997 p81). It is not the place of this research to provide a mathematical formalism with theorems and lemmas. Rather...science). The ancient philosophers, 27 Pythagoras , Protagoras, Socrates, and Plato start the first discourse (the message) that has continued...unpacking of the technology "message" from Pythagoras . This process is characterized by accumulation learning, modeled by learning curves in

  15. Stakeholder and Process Alignment in Navy Installation Technology Transitions

    Science.gov (United States)

    2017-02-01

    to communicate the results in forums such as the Federal Energy Exchange. Everywhere in DoD, projects must compete for resources. On the...being used in the DoD and proposes a general framework for adapting their best practices to the larger TTP community . Regnier is associate professor...their successful and cost- effective operational adoption. A successful technology must not only perform properly, it must interface smoothly with

  16. Technology Transition and Adoption: A Study in Search of Metrics for Evaluating Transition

    Science.gov (United States)

    2010-12-01

    develops a technology on time, within budget, and performs as advertised meets all conventional standards for success. However, if the technology gets...Model-Based Integration of Embedded Software ( MoBIES ) 0 USAF 1 0 0 0 0 76 Project Mobius: A Study on the Feasibility of Learning by Reading 0 0 0 1 0...Engine Generator (MSEG) Program 50 1 0 1,203 0 0 1 75 Model-Based Integration of Embedded Software ( MoBIES ) 45 1 0 1,659 0 0 1 76 Project Mobius: A

  17. System-level Analysis of Food Moisture Content Requirements for the Mars Dual Lander Transit Mission

    Science.gov (United States)

    Levri, Julie A.; Perchonok, Michele H.

    2004-01-01

    In order to ensure that adequate water resources are available during a mission, any net water loss from the habitat must be balanced with an equivalent amount of required makeup water. Makeup water may come from a variety of sources, including water in shipped tanks, water stored in prepackaged food, product water from fuel cells, and in-situ water resources. This paper specifically addresses the issue of storing required makeup water in prepackaged food versus storing the water in shipped tanks for the Mars Dual Lander Transit Mission, one of the Advanced Life Support Reference Missions. In this paper, water mass balances have been performed for the Dual Lander Transit Mission, to determine the necessary requirement of makeup water under nominal operation (i.e. no consideration of contingency needs), on a daily basis. Contingency issues are briefly discussed with respect to impacts on makeup water storage (shipped tanks versus storage in prepackaged food). The Dual Lander Transit Mission was selected for study because it has been considered by the Johnson Space Center Exploration Office in enough detail to define a reasonable set of scenario options for nominal system operation and contingencies. This study also illustrates the concept that there are multiple, reasonable life support system scenarios for any one particular mission. Thus, the need for a particular commodity can depend upon many variables in the system. In this study, we examine the need for makeup water as it depends upon the configuration of the rest of the life support system.

  18. Management competencies required in the transition from a technician to a supervisor

    Directory of Open Access Journals (Sweden)

    Sibongile R. Mahlangu (Kubheka

    2015-05-01

    Full Text Available Orientation: Technicians are frequently promoted to supervisory positions based on their technical abilities, with scant attention focused on developing management competencies. This oversight often poses significant challenges. The effective transition from technician to supervisor is important in any organisation. Research objective: The primary objective is to identify and verify the competencies that are required for a technician and a supervisory position; the secondary objective is to identify the gap that must be filled with relevant training interventions to enable technicians to make an effective transition to a supervisory position. Motivation for this study: The identification of the management competencies required for a technician who makes a career change to a supervisor position. Research method: The sequential mixed method approach was used to enable the twophase data collection process: phase one was the quantitative phase and phase two was the qualitative phase. Main findings: The overall findings confirm that there are indeed management competencies that technicians require training and development on before being promoted to a supervisory position. Implication: Organisations need to identify the key competencies for a technician and a supervisor and implement development or training interventions that are essential to successfully transition an employee from the level of a technician to the level of a supervisor. Contribution: Organisations need to implement essential development or training interventions focused on developing management competencies and put in place support interventions such as coaching, job shadowing, mentoring and networking.

  19. Mars Sample Return: Mars Ascent Vehicle Mission and Technology Requirements

    Science.gov (United States)

    Bowles, Jeffrey V.; Huynh, Loc C.; Hawke, Veronica M.; Jiang, Xun J.

    2013-01-01

    A Mars Sample Return mission is the highest priority science mission for the next decade recommended by the recent Decadal Survey of Planetary Science, the key community input process that guides NASAs science missions. A feasibility study was conducted of a potentially simple and low cost approach to Mars Sample Return mission enabled by the use of developing commercial capabilities. Previous studies of MSR have shown that landing an all up sample return mission with a high mass capacity lander is a cost effective approach. The approach proposed is the use of an emerging commercially available capsule to land the launch vehicle system that would return samples to Earth. This paper describes the mission and technology requirements impact on the launch vehicle system design, referred to as the Mars Ascent Vehicle (MAV).

  20. Law in Transition Biblioessay: Globalization, Human Rights, Environment, Technology

    Directory of Open Access Journals (Sweden)

    Michael Marien

    2012-04-01

    Full Text Available As globalization continues, many transformations in international and domestic laws areunderway or called for. There are too many laws and too few, too much law that is inadequateor obsolete, and too much law-breaking. This biblioessay covers some 100 recentbooks, nearly all recently published, arranged in four categories. 1 International Lawincludes six overviews/textbooks on comparative law, laws related to warfare and security,pushback against demands of globalization, and gender perspectives; 2 Human Rightsencompasses general overviews and normative visions, several books on how some statesviolate human rights, five items on how good laws can end poverty and promote prosperity,and laws regulating working conditions and health rights; 3 Environment/Resources coversgrowth of international environmental law, visions of law for a better environmental future,laws to govern genetic resources and increasingly stressed water resources, two books onprospects for climate change liability, and items on toxic hazards and problems of compliance;4 Technology, Etc. identifies eight books on global crime and the failed war on drugs,books on the response to terrorism and guarding privacy and mobility in our high-tech age,seven books on how infotech is changing law and legal processes while raising intellectualproperty questions, biomedical technologies and the law, and general views on the need forupdated laws and constitutions. In sum, this essay suggests the need for deeper and timelyanalysis of the many books on changes in law.

  1. CONDITIONS AND ORGANIZATION OF THE TRANSITION TO BASIC TECHNOLOGIES OF A NEW TECHNOLOGICAL STRUCTURE

    Directory of Open Access Journals (Sweden)

    B. L. Bourov

    2011-01-01

    Full Text Available With due account for the coming new (VI-th world technological structure, future creation of new types of industrial production is both possible and necessary. Economic environment conditions favorable for such development are designated. In reference to Russian technological environment particulars, self-developing economic-technological microenvironment of a new quality level should be created in zones where controlled «technological chains» function. Possibilities of creation of the VI-th technological structure level basic technologies are shown for industrial and household waste processing techniques as an example.

  2. Bruce Power's nuclear pressure boundary quality assurance program requirements, implementation and transition

    International Nuclear Information System (INIS)

    Krane, J.C.

    2009-01-01

    The development of a full scope nuclear pressure boundary quality assurance program in Canada requires extensive knowledge of the structure and detailed requirements of codes and standards published by the Canadian Standards Association (CSA) and American Society of Mechanical Engineers (ASME). Incorporation into company governance documents and implementation of these requirements while managing the transition to more recent revisions of these codes and standards represents a significant challenge for Bruce Power, Canada's largest independent nuclear operator. This paper explores the key developments and innovative changes that are used to ensure successful regulatory compliance and effective implementation of the Bruce Power Pressure Boundary Quality Assurance Program. Challenges and mitigating strategies to sustain this large compliance based program at Bruce Power's 8 unit nuclear power plant site will also be detailed. (author)

  3. An Analysis of Technological Issues Emanating from Faculty Transition to a New Learning Management System

    Science.gov (United States)

    Sanga, Mapopa William

    2016-01-01

    This case study investigated the process 119 faculty members underwent as they transitioned from using Desire to Learn (D2L) learning management system (LMS), to using Canvas LMS. Other than analyzing technological issues faculty members encountered while navigating various aspects of the Canvas interface, the study also analyzed technological…

  4. What governs the transition to a hydrogen economy? Articulating the relationship between technologies and political institutions

    NARCIS (Netherlands)

    Hisschemoller, M.; Bode, M.G.A.; van de Kerkhof, M.F.

    2006-01-01

    There is a lack of integrated knowledge on the transition to a sustainable energy system. The paper focuses on the relationship between technologies and institutions in the field of hydrogen from the perspective of political theory. The paper unfolds four paradigms of governance: 'Governance by

  5. Australian Nuclear Science and Technology Organization (Transitional Provisions) Act 1987 - No 4 of 1987

    International Nuclear Information System (INIS)

    1987-01-01

    This Act implements certain transitional provisions consequent to the enactment of the ANSTO Act 1987. The legislation provides for the continuation of the body corporate from its present form as the Australian Atomic Energy Commission to the new body corporate, the Australian Nuclear Science and Technology Organization. (NEA) [fr

  6. Technology images and concepts of technology in transition. An analysis in the philosophy of technology and general technology; Technikbilder und Technikkonzepte im Wandel. Eine technikphilosophische und allgemeintechnische Analyse

    Energy Technology Data Exchange (ETDEWEB)

    Banse, G. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (DE). Inst. fuer Technikfolgen-Abschaetzung und Systemanalyse (ITAS); Meier, B. [Potsdam Univ. (Germany). Inst. fuer Arbeitslehre/Technik; Wolffgramm, H. (eds.)

    2002-02-01

    This volume contains contributions resulting from an expert discussion on 'Technology Images and Concepts of Technology in Transition - an analysis in the philosophy of technology and general technology. This expert discussion took place on 6 October 2000 at the State Pedagogical Institute Brandenburg in Ludwigsfelde-Struveshof and was conceived and organized co-operatively by the Forschungszentrum Karlsruhe, Institute for Technology Assessment and Systems Analysis, the University of Potsdam, Institute for the Theory of Work/Technology and Professor Horst Wolffgramm, Frankfurt (Oder). It was the aim of the expert discussion to compile, compare and relate the various positions in the philosophy of technology, general technology science, the history of technology and the didactics of technology of the 'conceptualisation' of technology as a basis for generally understanding technology or for a scientifically based 'image of technology' to each other, and then to make them accessible for curricula within a framework of conceiving general technical education at all school levels. The contributions are grouped according to the two main foci of the event: On the one hand they are concerned with determining a contemporary concept of technology ('Image of technology'). One of the aims is to characterize technological change from the historical-genetic perspective and in this way to access technology as a work of mankind, as an important element of our culture. At the same time it is necessary to forecast future developments or to make future paths of development visible to enable the indication of change by basic innovations. Second, on this basis and supported by educational theory, conclusions are drawn for future-oriented technical general education for all students. The main focus in this is on the linkage between goals, content and subject-specific methods. In order to enable the determination of competence of any individual

  7. Overview of bladder heating technology: matching capabilities with clinical requirements

    Science.gov (United States)

    Stauffer, Paul R.; van Rhoon, Gerard C.

    2016-01-01

    Moderate temperature hyperthermia (40–450°C for one hour) is emerging as an effective treatment to enhance best available chemotherapy strategies for bladder cancer. A rapidly increasing number of clinical trials have investigated the feasibility and efficacy of treating bladder cancer with combined intravesical chemotherapy and moderate temperature hyperthermia. To date, most studies have concerned treatment of non-muscle invasive bladder cancer (NMIBC) limited to the interior wall of the bladder. Following the promising results of initial clinical trials, investigators are now considering protocols for treatment of muscle invasive bladder cancer (MIBC). This paper provides a brief overview of the devices and techniques used for heating bladder cancer. Systems are described for thermal conduction heating of bladder wall via circulation of hot fluid, intravesical microwave antenna heating, capacitively coupled RF current heating, and radiofrequency phased array deep regional heating of the pelvis. Relative heating characteristics of the available technologies are compared based on published feasibility studies, and the systems correlated with clinical requirements for effective treatment of MIBC and NMIBC. PMID:26939993

  8. Climate Change and Requirement of Transfer of Environmentally Sound Technology

    DEFF Research Database (Denmark)

    Uddin, Mahatab

    that developed the technology, to another that adopts, adapts, and uses it. As different kinds of threats posed by climate change are continuously increasing all over the world the issue of “technology transfer” especially the transfer of environmentally sound technologies has become one of the key topics...

  9. Emerging Requirements for Technology Management: A Sector-based Scenario Planning Approach

    Directory of Open Access Journals (Sweden)

    Simon Patrick Philbin

    2013-09-01

    Full Text Available Identifying the emerging requirements for technology management will help organisations to prepare for the future and remain competitive. Indeed technology management as a discipline needs to develop and respond to societal and industrial needs as well as the corresponding technology challenges. Therefore, following a review of technology forecasting methodologies, a sector-based scenario planning approach has been used to derive the emerging requirements for technology management. This structured framework provided an analytical lens to focus on the requirements for managing technology in the healthcare, energy and higher education sectors over the next 5-10 years. These requirements include the need for new business models to support the adoption of technologies; integration of new technologies with existing delivery channels; management of technology options including R&D project management; technology standards, validation and interoperability; and decision-making tools to support technology investment.

  10. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Fourth Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2013-01-01

    SunLine Transit Agency, which provides public transit services to the Coachella Valley area of California, has demonstrated hydrogen and fuel cell bus technologies for more than 10 years. In May 2010, SunLine began demonstrating the advanced technology (AT) fuel cell bus with a hybrid electric propulsion system, fuel cell power system, and lithium-based hybrid batteries. This report describes operations at SunLine for the AT fuel cell bus and five compressed natural gas buses. The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) is working with SunLine to evaluate the bus in real-world service to document the results and help determine the progress toward technology readiness. NREL has previously published three reports documenting the operation of the fuel cell bus in service. This report provides a summary of the results with a focus on the bus operation from February 2012 through November 2012.

  11. Understanding the health care utilization of children who require medical technology: A descriptive study of children who require tracheostomies.

    Science.gov (United States)

    Spratling, Regena

    2017-04-01

    Children who require medical technology have complex chronic illnesses. This medical technology, including ventilators, oximeters, tracheostomy tubes, and feeding tubes, allows children and their families to live at home; however, the management of the children's care by informal caregivers is complex with the need for intensive, specialized care. The purpose of this study was to examine the sociodemographic and clinical characteristics that affect health care utilization in a population of children who require medical technology. A retrospective electronic health record (EHR) review was completed on the EHR records on 171 children who require medical technology, specifically tracheostomies, at an outpatient technology dependent pulmonary clinic over a three year period (January 2010-December 2012). Descriptive statistics were used to analyze sociodemographic and clinical characteristics, including medical diagnoses, and emergency department (ED) visits and hospitalizations. Of the 171 children requiring medical technology studied, there were numerous medical diagnoses (n=791), 99% had chronic illnesses affecting two or more body systems, and 88% required two or more technologies, including a tracheostomy and a feeding tube. In addition, 91% of the children had at least one ED visit or hospitalization and were treated in the ED approximately three times over the three year period. The findings from this study noted an increased utilization of health care by these children, and identified common symptoms and medical technologies for which caregivers may need interventions, focusing on education in managing symptoms and medical technology prior to presentation to the ED or hospital. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. How energy technology innovation affects transition of coal resource-based economy in China

    International Nuclear Information System (INIS)

    Guo, Pibin; Wang, Ting; Li, Dan; Zhou, Xijun

    2016-01-01

    The aim of this research paper is to investigate factors and mechanisms that may facilitate the transition from coal resource-based economy to sustainability. Based on the energy technology innovation theory, factors that may influence the transition of coal resource-based economy were categorized into four types, including: innovation policy, innovation input, innovation ability, and innovation organization. Hypotheses were proposed regarding the mechanisms of these factors. Data were collected from surveys administered to 314 Chinese energy firms, and a structural equation model (SEM) was employed to test the hypotheses. Ten of fifteen hypotheses were retained based on the reliability tests, validity tests, and SEM. The results show that the four proposed factors are crucial in transforming the coal resource-based economy, and the effects become statistically significant through three intermediate variables, namely, transition of energy consumption structure, correction of resource wealth investment, and improvement of transition environment. - Highlights: •Approximately, 66% of energy relies on coal in China. •Serious environment problems have occurred in many coal-based regions. •Energy technology innovation can promote the transition of coal-based economy. •China should accelerate the development of clean energy.

  13. 76 FR 57044 - Announcement of Requirements and Registration for “Ensuring Safe Transitions From Hospital to Home”

    Science.gov (United States)

    2011-09-15

    ... Partnership for Patients, seeks to stimulate innovative approaches to care transitions and improving patient... otherwise. Participants shall be required to obtain liability insurance or demonstrate financial... irrevocably grants to Sponsor and Administrator a limited, non- exclusive, royalty free, worldwide, license...

  14. Soft Energy Paths Revisited: Politics and Practice in Energy Technology Transitions

    Directory of Open Access Journals (Sweden)

    Chelsea Schelly

    2016-10-01

    Full Text Available This paper argues that current efforts to study and advocate for a change in energy technologies to reduce their climate and other environmental impacts often ignore the political, social, and bodily implications of energy technology choices. Framing renewable energy technologies exclusively in terms of their environmental benefits dismisses important questions about how energy infrastructures can be designed to correspond to democratic forms of socio-politics, forms of social organization that involve independence in terms of meeting energy needs, resilience in terms of adapting to change, participatory decision making and control, equitable distribution of knowledge and efficacy, and just distribution of ownership. Recognizing technological choices as political choices brings explicit attention to the kinds of socio-political restructuring that could be precipitated through a renewable energy technology transition. This paper argues that research on energy transitions should consider the political implications of technological choices, not just the environmental consequences. Further, emerging scholarship on energy practices suggests that social habits of energy usage are themselves political, in that they correspond to and reinforce particular arrangements of power. Acknowledging the embedded politics of technology, as the decades’ old concept of soft path technologies encourages, and integrating insights on the politics of technology with insights on technological practices, can improve future research on energy policy and public perceptions of energy systems. This paper extends insights regarding the socio-political implications of energy paths to consider how understandings of energy technologies as constellations of embedded bodily practices can help further develop our understanding of the consequences of energy technologies, consequences that move beyond environmental implications to the very habits and behaviors of patterned energy

  15. TRANSIT

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. TRANSIT. SYSTEM: DETERMINE 2D-POSITION GLOBALLY BUT INTERMITTENT (POST-FACTO). IMPROVED ACCURACY. PRINCIPLE: POLAR SATELLITES WITH INNOVATIONS OF: GRAVITY-GRADIENT ATTITUDE CONTROL; DRAG COMPENSATION. WORKS ...

  16. Masculinity and Material Culture in Technological Transitions: From Letterpress to Offset Lithography, 1960s-1980s.

    Science.gov (United States)

    Stein, Jesse Adams

    Between the 1960s and the 1980s the printing industry in advanced capitalist economies underwent dramatic technological change. While the transition from "hot metal" compositing to computerized typesetting has been extensively analyzed, there was another transformation occurring simultaneously: in the pressroom, letterpress was gradually replaced by offset lithography. Many letterpress machinists retrained, moving from a heavy, manual technology (with an entrenched patriarchal culture) to a method that was faster and less physically taxing. However, unlike their compositor counterparts, the press-machinists' transition involved a continuity of traditional masculine craft identities rather than a rupture associated with "deskilling." Intrinsic to this experience of technological change was a masculine embodiment that was attuned to and shaped by the materiality and aesthetics of printing technologies. This article establishes how masculine craft identities do not rely exclusively on skill-based mastery of traditional technologies, but also relate to other dimensions of technology, such as aesthetics, embodied "know-how," and the physicality of industrial machinery.

  17. Task 4 supporting technology. Densification requirements definition and test objectives. Propellant densification requirements definition

    Science.gov (United States)

    Lak, Tibor; Weeks, D. P.

    1995-01-01

    The primary challenge of the X-33 CAN is to build and test a prototype LO2 and LH2 densification ground support equipment (GSE) unit, and perform tank thermodynamic testing within the 15 month phase 1 period. The LO2 and LH2 propellant densification system will be scaled for the IPTD LO2 and LH2 tank configurations. The IPTD tanks were selected for the propellant technology demonstration because of the potential benefits to the phase 1 plan: tanks will be built in time to support thermodynamic testing; minimum cost; minimum schedule risk; future testing at MSFC will build on phase 1 data base; and densification system will be available to support X-33 and RLV engine test at IPTD. The objective of the task 1 effort is to define the preliminary requirements of the propellant densification GSE and tank recirculation system. The key densification system design parameters to be established in Task 1 are: recirculation flow rate; heat exchanger inlet temperature; heat exchanger outlet temperature; maximum heat rejection rate; vent flow rate (GN2 and GH2); densification time; and tank pressure level.

  18. Technology and transition : ‘Progressive Evolution of Regimes and the Consequences for Energy Regime Change

    NARCIS (Netherlands)

    Read, S.A.; Lindhult, Erik

    2016-01-01

    Transition of energy systems has been under-theorised. We have argued previously that energy efficiency as a strategy for fossil fuel replacement is inadequate as energy demand is not being reduced by efficiency alone. This paper is intended to elaborate further on the reasons. We require better

  19. Integrating speech technology to meet crew station design requirements

    Science.gov (United States)

    Simpson, Carol A.; Ruth, John C.; Moore, Carolyn A.

    The last two years have seen improvements in speech generation and speech recognition technology that make speech I/O for crew station controls and displays viable for operational systems. These improvements include increased robustness of algorithm performance in high levels of background noise, increased vocabulary size, improved performance in the connected speech mode, and less speaker dependence. This improved capability makes possible far more sophisticated user interface design than was possible with earlier technology. Engineering, linguistic, and human factors design issues are discussed in the context of current voice I/O technology performance.

  20. Abcc9 is required for the transition to oxidative metabolism in the newborn heart.

    Science.gov (United States)

    Fahrenbach, John P; Stoller, Douglas; Kim, Gene; Aggarwal, Nitin; Yerokun, Babatunde; Earley, Judy U; Hadhazy, Michele; Shi, Nian-Qing; Makielski, Jonathan C; McNally, Elizabeth M

    2014-07-01

    The newborn heart adapts to postnatal life by shifting from a fetal glycolytic metabolism to a mitochondrial oxidative metabolism. Abcc9, an ATP-binding cassette family member, increases expression concomitant with this metabolic shift. Abcc9 encodes a membrane-associated receptor that partners with a potassium channel to become the major potassium-sensitive ATP channel in the heart. Abcc9 also encodes a smaller protein enriched in the mitochondria. We now deleted exon 5 of Abcc9 to ablate expression of both plasma membrane and mitochondria-associated Abcc9-encoded proteins, and found that the myocardium failed to acquire normal mature metabolism, resulting in neonatal cardiomyopathy. Unlike wild-type neonatal cardiomyocytes, mitochondria from Ex5 cardiomyocytes were unresponsive to the KATP agonist diazoxide, consistent with loss of KATP activity. When exposed to hydrogen peroxide to induce cell stress, Ex5 neonatal cardiomyocytes displayed a rapid collapse of mitochondria membrane potential, distinct from wild-type cardiomyocytes. Ex5 cardiomyocytes had reduced fatty acid oxidation, reduced oxygen consumption and reserve. Morphologically, Ex5 cardiac mitochondria exhibited an immature pattern with reduced cross-sectional area and intermitochondrial contacts. In the absence of Abcc9, the newborn heart fails to transition normally from fetal to mature myocardial metabolism.-Fahrenbach, J. P., Stoller, D., Kim, G., Aggarwal, N., Yerokun, B., Earley, J. U., Hadhazy, M., Shi, N.-Q., Makielski, J. C., McNally, E. M. Abcc9 is required for the transition to oxidative metabolism in the newborn heart. © FASEB.

  1. 14 CFR 1274.937 - Security requirements for unclassified information technology resources.

    Science.gov (United States)

    2010-01-01

    ... information technology resources. 1274.937 Section 1274.937 Aeronautics and Space NATIONAL AERONAUTICS AND... Conditions § 1274.937 Security requirements for unclassified information technology resources. Security Requirements for Unclassified Information Technology Resources July 2002 (a) The Recipient shall be responsible...

  2. 42 CFR 495.336 - Health information technology planning advance planning document requirements (HIT PAPD).

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Health information technology planning advance... STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.336 Health information technology planning advance planning document requirements...

  3. The Role of Transition of Workforce between Companies in Transferring Technology

    Directory of Open Access Journals (Sweden)

    Sedki Esmaeel Rezouki

    2015-12-01

    Full Text Available The transition of professionals between different sectors is considered as one of sources of acquisition of technology and will lead to add the practical experience to them. This experience depending on different factors like: the scientific degree and practical experience by the professionals, the technology possessed by the transferor sector, the duration that spent by experienced in transferor sector, the type of work performed by professional….etc. The research aims to verify the affect of these factors in technology transfer process. Research reached that the technology transfer process which is depending on the Iraqi competencies in work is unsatisfied level between Iraqi organizations because there are different obstacles behind this. Research diagnosed such obstacles as well as the procedures that followed-up by professionals to serve this process.

  4. Transition to Glass: Pilot Training for High-Technology Transport Aircraft

    Science.gov (United States)

    Wiener, Earl L.; Chute, Rebecca D.; Moses, John H.

    1999-01-01

    This report examines the activities of a major commercial air carrier between 1993 and late 1996 as it acquired an advanced fleet of high-technology aircraft (Boeing 757). Previously, the airline's fleet consisted of traditional (non-glass) aircraft, and this report examines the transition from a traditional fleet to a glass one. A total of 150 pilots who were entering the B-757 transition training volunteered for the study, which consisted of three query phases: (1) first day of transition training, (2) 3 to 4 months after transition training, and (3) 12 to 14 months after initial operating experience. Of these initial 150 pilots, 99 completed all three phases of the study, with each phase consisting of probes on attitudes and experiences associated with their training and eventual transition to flying the line. In addition to the three questionnaires, 20 in-depth interviews were conducted. Although the primary focus of this study was on the flight training program, additional factors such as technical support, documentation, and training aids were investigated as well. The findings generally indicate that the pilot volunteers were highly motivated and very enthusiastic about their training program. In addition, the group had low levels of apprehension toward automation and expressed a high degree of satisfaction toward their training. However, there were some concerns expressed regarding the deficiencies in some of the training aids and lack of a free-play flight management system training device.

  5. Requirements for and barriers towards interoperable ehealth technology in primary care

    NARCIS (Netherlands)

    Oude Nijeweme-d'Hollosy, Wendeline; van Velsen, Lex Stefan; Huygens, Martine; Hermens, Hermanus J.

    Despite eHealth technology's rapid growth, eHealth applications are rarely embedded within primary care, mostly because systems lack interoperability. This article identifies requirements for, and barriers towards, interoperable eHealth technology from healthcare professionals' perspective -- the

  6. Development of requirements tracking and verification technology for the NPP software

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Chul Hwan; Kim, Jang Yeol; Lee, Jang Soo; Song, Soon Ja; Lee, Dong Young; Kwon, Kee Choon

    1998-12-30

    Searched and analyzed the technology of requirements engineering in the areas of aerospace and defense industry, medical industry and nuclear industry. Summarized the status of tools for the software design and requirements management. Analyzed the software design methodology for the safety software of NPP. Development of the design requirements for the requirements tracking and verification system. Development of the background technology to design the prototype tool for the requirements tracking and verification.

  7. Development of requirements tracking and verification technology for the NPP software

    International Nuclear Information System (INIS)

    Jung, Chul Hwan; Kim, Jang Yeol; Lee, Jang Soo; Song, Soon Ja; Lee, Dong Young; Kwon, Kee Choon

    1998-01-01

    Searched and analyzed the technology of requirements engineering in the areas of aerospace and defense industry, medical industry and nuclear industry. Summarized the status of tools for the software design and requirements management. Analyzed the software design methodology for the safety software of NPP. Development of the design requirements for the requirements tracking and verification system. Development of the background technology to design the prototype tool for the requirements tracking and verification

  8. Information technology - Security techniques - Information security management systems - Requirements

    CERN Document Server

    International Organization for Standardization. Geneva

    2005-01-01

    ISO/IEC 27001:2005 covers all types of organizations (e.g. commercial enterprises, government agencies, not-for profit organizations). ISO/IEC 27001:2005 specifies the requirements for establishing, implementing, operating, monitoring, reviewing, maintaining and improving a documented Information Security Management System within the context of the organization's overall business risks. It specifies requirements for the implementation of security controls customized to the needs of individual organizations or parts thereof. ISO/IEC 27001:2005 is designed to ensure the selection of adequate and proportionate security controls that protect information assets and give confidence to interested parties. ISO/IEC 27001:2005 is intended to be suitable for several different types of use, including the following: use within organizations to formulate security requirements and objectives; use within organizations as a way to ensure that security risks are cost effectively managed; use within organizations to ensure comp...

  9. Coated fuel particles: requirements and status of fabrication technology

    International Nuclear Information System (INIS)

    Huschka, H.; Vygen, P.

    1977-01-01

    Fuel cycle, design, and irradiation performance requirements impose restraints on the fabrication processes. Both kernel and coating fabrication processes are flexible enough to adapt to the needs of the various existing and proposed high-temperature gas-cooled reactors. Extensive experience has demonstrated that fuel kernels with excellent sphericity and uniformity can be produced by wet chemical processes. Similarly experience has shown that the various multilayer coatings can be produced to fully meet design and specification requirements. Quality reliability of coated fuel particles is ensured by quality control and quality assurance programs operated by an aduiting system that includes licensing officials and the customer

  10. Research and test facilities required in nuclear science and technology

    International Nuclear Information System (INIS)

    2009-01-01

    Experimental facilities are essential research tools both for the development of nuclear science and technology and for testing systems and materials which are currently being used or will be used in the future. As a result of economic pressures and the closure of older facilities, there are concerns that the ability to undertake the research necessary to maintain and to develop nuclear science and technology may be in jeopardy. An NEA expert group with representation from ten member countries, the International Atomic Energy Agency and the European Commission has reviewed the status of those research and test facilities of interest to the NEA Nuclear Science Committee. They include facilities relating to nuclear data measurement, reactor development, neutron scattering, neutron radiography, accelerator-driven systems, transmutation, nuclear fuel, materials, safety, radiochemistry, partitioning and nuclear process heat for hydrogen production. This report contains the expert group's detailed assessment of the current status of these nuclear research facilities and makes recommendations on how future developments in the field can be secured through the provision of high-quality, modern facilities. It also describes the online database which has been established by the expert group which includes more than 700 facilities. (authors)

  11. Transition Management: Case Study of an Energy Efficiency Technology Roadmap in Turkey

    Directory of Open Access Journals (Sweden)

    Şiir Kilkiş

    2014-12-01

    Full Text Available This paper integrates several streams of literature in transition management and proposes a holistic framework for its application in policy-making. Separate fields of study, such as motors of change and strategic intelligence tools, are unified in a single analytical process. The process involves five steps that may be repeated until a desired policy objective is achieved. The pilot, integrated technology roadmap process that has been launched in Turkey is analyzed as a case study. The Energy Efficiency Technology Roadmap has been completed with the participation of over 160 experts in 5 different stages. It involved the collection of over 349 Delfi statements, their consolidation for a Delfi survey with 16 statements, the analysis of the results, a focal group meeting to develop roadmaps for the 7 selected goals, and the consultation of the roadmaps to the sector. The paper concludes that an integrated technology roadmap process, as described in the pilot case study, provides an advanced version of transition management, which is needed to mobilize research, development, and innovation for sustainable development.

  12. Materials technology for fusion - Current status and future requirements

    International Nuclear Information System (INIS)

    Gold, R.E.; Bloom, E.E.; Clinard, F.W. Jr.; Smith, D.L.; Stevenson, R.D.; Wolfer, W.G.

    1981-01-01

    The general status of the materials research and development activities currently under way in support of controlled thermonuclear fusion reactors in the United States is reviewed. In the area of magnetic confinement configurations, attention is given to development programs for first wall materials, which are at various stages for possible austenitic stainless steels, high-strength Fe-Ni-Cr alloys, reactive and refractory metal alloys, specially designed long-range ordered and rapidly solidified alloys, and ferritic/martensitic steels, and for tritium breeding materials, electrical insulators, ceramics, and coolants. The development of materials for inertial confinement reactors is also surveyed in relation to the protection scheme employed for the first wall and the effects of pulsed neutron irradiation. Finally, the materials requirements and selection procedures for the ETF/INTOR and Starfire tokamak reactor designs are examined. Needs for the expansion of research on nonfirst-wall materials and inertial confinement fusion reactor material requirements are pointed out

  13. 42 CFR 495.338 - Health information technology implementation advance planning document requirements (HIT IAPD).

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Health information technology implementation... CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.338 Health information technology implementation advance planning document...

  14. 48 CFR 1252.239-70 - Security requirements for unclassified information technology resources.

    Science.gov (United States)

    2010-10-01

    ... unclassified information technology resources. 1252.239-70 Section 1252.239-70 Federal Acquisition Regulations... of Provisions and Clauses 1252.239-70 Security requirements for unclassified information technology... Unclassified Information Technology Resources (APR 2005) (a) The Contractor shall be responsible for...

  15. 48 CFR 3052.204-70 - Security requirements for unclassified information technology resources.

    Science.gov (United States)

    2010-10-01

    ... unclassified information technology resources. 3052.204-70 Section 3052.204-70 Federal Acquisition Regulations... for unclassified information technology resources. As prescribed in (HSAR) 48 CFR 3004.470-3, insert a clause substantially the same as follows: Security Requirements for Unclassified Information Technology...

  16. 75 FR 28554 - Elimination of Classification Requirement in the Green Technology Pilot Program

    Science.gov (United States)

    2010-05-21

    ...] Elimination of Classification Requirement in the Green Technology Pilot Program AGENCY: United States Patent... (USPTO) implemented the Green Technology Pilot Program on December 8, 2009, which permits patent... technologies. However, the pilot program was limited to only applications classified in a number of U.S...

  17. 34 CFR 400.9 - What additional requirements govern the Vocational and Applied Technology Education Programs?

    Science.gov (United States)

    2010-07-01

    ... Applied Technology Education Programs? 400.9 Section 400.9 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.9 What additional requirements govern the Vocational and Applied Technology Education Programs? In addition to the Act, applicable...

  18. Report to Congress on the Activities of the DoD Office of Technology Transition

    Science.gov (United States)

    2006-08-01

    protection, and protected remote access solutions for telecommuting . NetTop inventors/engineers of this technology will soon be engaged in a CRADA...from each Service and Defense Agency and representatives from the Joint Requirements Oversight Council. An annual call for TTI proposals is...Electronics Oversight Council proposed the start of the RH Microelectronics Advanced Technology Development (RHMATD) program. The program called for two

  19. 48 CFR 1804.470 - Security requirements for unclassified information technology (IT) resources.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Security requirements for unclassified information technology (IT) resources. 1804.470 Section 1804.470 Federal Acquisition Regulations... Classified Information Within Industry 1804.470 Security requirements for unclassified information technology...

  20. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: First Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2011-03-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This report provides the early data results and implementation experience of the AT fuel cell bus since it was placed in service.

  1. Linking Technology Capabilities to Marketing Requirements: Case of Indonesian Aircraft Industry

    Directory of Open Access Journals (Sweden)

    Yulianto Suharto

    2014-08-01

    Full Text Available Abstract. The relationship between strategic technology planning and the overall business strategy has been one of the growing fields that attract much interest both from academics and industrials point of view. The increasingly important role that technology plays in today’s business success is well established.Strategic technology planning activities--within a corporate level--are often implemented by applying integrated planning instrument, which allow firms to consider both technology-oriented and product-oriented aspects. This paper is an attempt to explore the role of strategic planning in the high tech industry using a specific case of aerospace industry in Indonesia.  In order to compete effectively inthe open global marketplace, the company must learn to integrate technology managementwith strategic planning. In other words, all top managers have to linktheir technology capabilities to marketing requirements.Keywords:  technology planning; business strategy; technology capability; marketing requirement; strategic mix 

  2. Solar sorptive cooling. Technologies, user requirements, practical experience, future prospects

    Energy Technology Data Exchange (ETDEWEB)

    Treffinger, P. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Hardthausen (Germany); Hertlein, H.P. [eds.] [Forschungsverbund Sonnenenergie, Koeln (Germany)

    1998-09-01

    Sorptive cooling techniques permit the use of low-temperature solar heat, i.e. a renewable energy of low cost and world-wide availability. The Forschungsverbund Sonnenenergie intends to develop solar sorptive cooling technologies to the prototype stage and, in cooperation with the solar industry and its end users, to promote practical application in air conditioning of buildings and cold storage of food. The workshop presents an outline of the state of development of solar sorptive cooling from the view of users and developers. Exemplary solar cooling systems are described, and the potential of open and closed sorptive processes is assessed. Future central activities will be defined in an intensive discussion between planners, producers, users and developers. [German] Der Einsatz von Sorptionstechniken zur Kaelteerzeugung erlaubt es, als treibende Solarenergie Niedertemperatur-Solarwaerme einzusetzen, also eine regenerative Energie mit sehr geringen Kosten und weltweiter Verfuegbarkeit. Der Forschungsverbund Sonnenenergie hat sich als Aufgabe gestellt, die Techniken der solaren Sorptionskuehlung bis zum Prototyp zu entwickeln und mit Industrie und Nutzern die praktische Anwendung voranzubringen. Die Anwendungsfelder sind die Klimatisierung von Gebaeuden und die Kaltlagerung von Lebensmitteln. Der Workshop gibt einen Ueberblick zum Entwicklungsstand der solaren Sorptionskuehlung aus der Sicht der Anwender und Entwickler. Bereits ausgefuehrte Beispiele zur solaren Kuehlung werden vorgestellt und das Potential geschlossener und offener Sorptionsverfahren angegeben. In intensiver Diskussion zwischen Planern, Herstellern, Nutzern und Entwicklern sollen kuenftige Arbeitsschwerpunkte herausgearbeitet werden. (orig.)

  3. Technology requirements to be addressed by the NASA Lewis Research Center Cryogenic Fluid Management Facility program

    Science.gov (United States)

    Aydelott, J. C.; Rudland, R. S.

    1985-01-01

    The NASA Lewis Research Center is responsible for the planning and execution of a scientific program which will provide advance in space cryogenic fluid management technology. A number of future space missions were identified that require or could benefit from this technology. These fluid management technology needs were prioritized and a shuttle attached reuseable test bed, the cryogenic fluid management facility (CFMF), is being designed to provide the experimental data necessary for the technology development effort.

  4. A complex systems methodology to transition management

    NARCIS (Netherlands)

    Alkemade, F.; Frenken, K.; Hekkert, M.P.; Schwoon, M.

    2009-01-01

    There is a general sense of urgency that major technological transitions are required for sustainable development. Such transitions are best perceived as involving multiple transition steps along a transition path. Due to the path dependent and irreversible nature of innovation in complex

  5. Technology neutral licensing requirements: have we been successful?

    International Nuclear Information System (INIS)

    Jamieson, T.

    2009-01-01

    The Canadian Nuclear Safety Commission (CNSC) is Canada's nuclear regulator. In preparation for the licensing of the next generation of nuclear reactors in Canada, the CNSC has made major changes in its processes and procedures associated with all aspects of the licensing life cycle. These include: development of key regulatory documents outlining the CNSC expectations for the design and siting of new reactors; creation of applicant guidelines for completing licensing applications; creation of a comprehensive set of review guides, specifying how topics in applications are to be reviewed; performing pre-project design reviews for proposed new reactor technologies; and streamlining processes wherever possible, such as performing the environmental assessment and license to prepare site activities in parallel. The predicted workload associated with the nuclear renaissance in Canada is real. The CNSC is currently performing: 4 pre-project design reviews (for AECL's ACR-1000 and EC-6, Areva's EPR and Westinghouse's AP-1000), has received applications for 4 new builds (at Darlington, Bruce, Nanticoke and in Alberta) and is in the midst of performing the combined environmental assessment and license to prepare site phases for these sites. This is in addition to the work associated with: the licensing of new uranium mines; oversight of the existing reactor fleet; refurbishments at Bruce/Gentilly/Point Lepreau; license renewal for the NRU reactor; and oversight of our general client base of over 5000 licensees. In this presentation, experience to date with these new processes and procedures will be discussed, including: status of the current new build projects; anticipated new activities; lessons learned, especially the technology neutral approach; application to our other licensed activities, including non-power reactors; and work underway to further develop CNSC methods. Qualifications Needed to Design, Construct and Manufacture Nuclear Systems and Equipment, C. Voutsinos

  6. Pump requirements for betatron-generated femtosecond X-ray laser at saturation from inner-shell transitions

    International Nuclear Information System (INIS)

    Ribiere, M.; Grunenwald, J.; Ribeiro, P.; Sebban, S.; Phuoc, K.Ta; Gautier, J.; Kozlova, M.; Zeitoun, P.; Rousse, A.; Jacquemot, S.; Cheron, B.G.

    2012-01-01

    We study pump requirements to produce femtosecond X-ray laser pulses at saturation from inner-shell transitions in the amplified spontaneous emission regime. Since laser-based betatron radiation is considered as the pumping source, we first study the impact of the driving laser power on its intensity. Then we investigate the amplification behavior of the K-a transition of nitrogen at 3.2 nm (395 eV) from radiative transfer calculations coupled with kinetics modeling of the ion population densities. We show that the saturation regime may be experimentally achieved by using PW-class laser-accelerated electron bunches. Finally, we show that this X-ray laser scheme can be extended to heavier atoms and we calculate pump requirements to reach saturation at 1.5 nm (849 eV) from the K-a transition of neon. (authors)

  7. The importance of health information technology in care coordination and transitional care.

    Science.gov (United States)

    Cipriano, Pamela F; Bowles, Kathryn; Dailey, Maureen; Dykes, Patricia; Lamb, Gerri; Naylor, Mary

    2013-01-01

    Care coordination and transitional care services are strategically important for achieving the priorities of better care, better health, and reduced costs embodied in the National Strategy for Quality Improvement in Health Care (National Quality Strategy [NQS]). Some of the most vulnerable times in a person’s care occur with changes in condition as well as movement within and between settings of care. The American Academy of Nursing (AAN) believes it is essential to facilitate the coordination of care and transitions by using health information technology (HIT) to collect, share, and analyze data that communicate patient-centered information among patients, families, and care providers across communities. HIT makes information accessible, actionable, timely, customizable, and portable. Rapid access to information also creates efficiencies in care by eliminating redundancies and illuminating health history and prior care. The adoption of electronic health records (EHRs) and information systems can enable care coordination to be more effective but only when a number of essential elements are addressed to reflect the team-based nature of care coordination as well as a focus on the individual’s needs and preferences. To that end, the AAN offers a set of recommendations to guide the development of the infrastructure, standards, content, and measures for electronically enabled care coordination and transitions in care as well as research needed to build the evidence base to assess outcomes of the associated interventions.

  8. Security Transition Program Office (STPO), technology transfer of the STPO process, tools, and techniques

    Energy Technology Data Exchange (ETDEWEB)

    Hauth, J.T.; Forslund, C.R.J.; Underwood, J.A.

    1994-09-01

    In 1990, with the transition from a defense mission to environmental restoration, the U.S. Department of Energy`s (DOE`s) Hanford Site began a significant effort to diagnose, redesign, and implement new safeguards and security (SAS) processes. In 1992 the Security Transition Program Office (STPO) was formed to address the sweeping changes that were being identified. Comprised of SAS and other contractor staff with extensive experience and supported by staff experienced in organizational analysis and work process redesign, STPO undertook a series of tasks designed to make fundamental changes to SAS processes throughout the Hanford Site. The goal of STPO is to align the SAS work and organization with the new Site mission. This report describes the key strategy, tools, methods, and techniques used by STPO to change SAS processes at Hanford. A particular focus of this review is transferring STPO`s experience to other DOE sites and federal agency efforts: that is, to extract, analyze, and provide a critical review of the approach, tools, and techniques used by STPO that will be useful to other DOE sites and national laboratories in transitioning from a defense production mode to environmental restoration and other missions. In particular, what lessons does STPO provide as a pilot study or model for implementing change in other transition activities throughout the DOE complex? More broadly, what theoretical and practical contributions do DOE transition efforts, such as STPO, provide to federal agency streamlining efforts and attempts to {open_quotes}reinvent{close_quotes} government enterprises in the public sector? The approach used by STPO should provide valuable information to those examining their own processes in light of new mission requirements.

  9. Battery requirements and technologies for micro hybrid applications

    Energy Technology Data Exchange (ETDEWEB)

    Karden, Eckhard; Ploumen, Serve; Spijker, Engbert [Ford Forschungszentrum Aachen GmbH (Germany); Kok, Daniel [Ford Dunton Engineering Center, Basildon, Essex (United Kingdom)

    2010-07-01

    Micro hybrids are part of all European carmakers' CO{sub 2} roadmaps and will get high market share, becoming a standard fit for mainstream powertrains. Starting from vehicle level, the paper outlines system requirements and typical technical solutions. A case study demonstrates potential and limitations of regenerative braking in micro hybrid systems. The lead/acid battery dynamic charge acceptance (DCA) is a major limitation for efficient energy recuperation, and hence fuel and CO{sub 2} saving in micro hybrids. Strengths and weaknesses of the lead/acid battery are discussed with respect to both classical automotive as well as the new micro hybrid applications. The latter impose characteristic high demands on the starting - lighting - ignition (SLI) battery or the storage system that is going to replace it, namely extensive shallow cycling at partial state of charge (PSOC) and significantly improved DCA. Delivering these additional functions robustly and reliably at minimum on-cost for high-volume applications is the key challenge that the automotive lead/acid battery industry is currently confronted with. (orig.)

  10. New calorimeters for space experiments: physics requirements and technological challenges

    Science.gov (United States)

    Marrocchesi, Pier Simone

    2015-07-01

    Direct measurements of charged cosmic radiation with instruments in Low Earth Orbit (LEO), or flying on balloons above the atmosphere, require the identification of the incident particle, the measurement of its energy and possibly the determination of its sign-of-charge. The latter information can be provided by a magnetic spectrometer together with a measurement of momentum. However, magnetic deflection in space experiments is at present limited to values of the Maximum Detectable Rigidity (MDR) hardly exceeding a few TV. Advanced calorimetric techniques are, at present, the only way to measure charged and neutral radiation at higher energies in the multi-TeV range. Despite their mass limitation, calorimeters may achieve a large geometric factor and provide an adequate proton background rejection factor, taking advantage of a fine granularity and imaging capabilities. In this lecture, after a brief introduction on electromagnetic and hadronic calorimetry, an innovative approach to the design of a space-borne, large acceptance, homogeneous calorimeter for the detection of high energy cosmic rays will be described.

  11. Geminin is required for zygotic gene expression at the Xenopus mid-blastula transition.

    Directory of Open Access Journals (Sweden)

    Sarah L Kerns

    Full Text Available In many organisms early development is under control of the maternal genome and zygotic gene expression is delayed until the mid-blastula transition (MBT. As zygotic transcription initiates, cell cycle checkpoints become activated and the tempo of cell division slows. The mechanisms that activate zygotic transcription at the MBT are incompletely understood, but they are of interest because they may resemble mechanisms that cause stem cells to stop dividing and terminally differentiate. The unstable regulatory protein Geminin is thought to coordinate cell division with cell differentiation. Geminin is a bi-functional protein. It prevents a second round of DNA replication during S and G2 phase by binding and inhibiting the essential replication factor Cdt1. Geminin also binds and inhibits a number of transcription factors and chromatin remodeling proteins and is thought to keep dividing cells in an undifferentiated state. We previously found that the cells of Geminin-deficient Xenopus embryos arrest in G2 phase just after the MBT then disintegrate at the onset of gastrulation. Here we report that they also fail to express most zygotic genes. The gene expression defect is cell-autonomous and is reproduced by over-expressing Cdt1 or by incubating the embryos in hydroxyurea. Geminin deficient and hydroxyurea-treated blastomeres accumulate DNA damage in the form of double stranded breaks. Bypassing the Chk1 pathway overcomes the cell cycle arrest caused by Geminin depletion but does not restore zygotic gene expression. In fact, bypassing the Chk1 pathway by itself induces double stranded breaks and abolishes zygotic transcription. We did not find evidence that Geminin has a replication-independent effect on transcription. We conclude that Geminin is required to maintain genome integrity during the rapid cleavage divisions, and that DNA damage disrupts zygotic gene transcription at the MBT, probably through activation of DNA damage checkpoint pathways.

  12. From biological neural networks to thinking machines: Transitioning biological organizational principles to computer technology

    Science.gov (United States)

    Ross, Muriel D.

    1991-01-01

    The three-dimensional organization of the vestibular macula is under study by computer assisted reconstruction and simulation methods as a model for more complex neural systems. One goal of this research is to transition knowledge of biological neural network architecture and functioning to computer technology, to contribute to the development of thinking computers. Maculas are organized as weighted neural networks for parallel distributed processing of information. The network is characterized by non-linearity of its terminal/receptive fields. Wiring appears to develop through constrained randomness. A further property is the presence of two main circuits, highly channeled and distributed modifying, that are connected through feedforward-feedback collaterals and biasing subcircuit. Computer simulations demonstrate that differences in geometry of the feedback (afferent) collaterals affects the timing and the magnitude of voltage changes delivered to the spike initiation zone. Feedforward (efferent) collaterals act as voltage followers and likely inhibit neurons of the distributed modifying circuit. These results illustrate the importance of feedforward-feedback loops, of timing, and of inhibition in refining neural network output. They also suggest that it is the distributed modifying network that is most involved in adaptation, memory, and learning. Tests of macular adaptation, through hyper- and microgravitational studies, support this hypothesis since synapses in the distributed modifying circuit, but not the channeled circuit, are altered. Transitioning knowledge of biological systems to computer technology, however, remains problematical.

  13. Evaluation of technology modifications required to apply clean coal technologies in Russian utilities. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The report describes the following: overview of the Russian power industry; electric power equipment of Russia; power industry development forecast for Russia; clean coal technology demonstration program of the US Department of Energy; reduction of coal TPS (thermal power station) environmental impacts in Russia; and base options of advanced coal thermal power plants. Terms of the application of clean coal technology at Russian TPS are discussed in the Conclusions.

  14. Requirements for cross-border spatial planning technologies in the European context

    Directory of Open Access Journals (Sweden)

    Frank Susanne

    2017-01-01

    Full Text Available This communication paper investigates requirements for cross-border spatial planning technologies. We refer to European cross-border regions, which are located in the European Baltic Sea Region. We hypothesize that there is no efficient cross-border spatial planning without engagement from various stakeholders, supported by novel spatial planning technologies. This study presents the results from a survey that identifies the requirements for spatial planning technologies adequate for cross - border regions. On the basis of this survey, carried out within the INTECRE project partners coming from the Baltic Sea Region, the study provides general recommendations about cross - border spatial planning technologies. Addressed in the survey are the following central issues: definition of the scope of such technologies, the data base and international planning data provision, features and properties of planning technologies, and stakeholder involvement. The research findings are transferable to wider European and extra- European contexts.

  15. Energy storage technology for electric and hybrid vehicles. Matching technology to design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Wahlstroem, J. [Sycon Energikonsult AB, Malmoe (Sweden)

    1999-12-01

    A central issue when dealing with electrical vehicles has always been how to store energy in sufficient quantities. On April 27 through 28 1999 a workshop was held on this matter at University of California Davis (UC Davis). Organizer and host was Dr. Andrew Burke and the Institute of Transportation Studies (ITS) at UC Davis. The workshop included battery technology, ultra capacitors and fly wheels, but did not include fuel cell technology. In this paper the conference is reviewed with the emphasis on battery development. A section on ultra capacitors and flywheels is also included. The overall observation made at the conference is that most of the effort on energy storage in electric and hybrid vehicles are put into batteries. There is some development on ultra capacitors but almost none on flywheels. The battery also seems to be the choice of the car industry at this point, especially the pulse battery for engine dominant hybrid vehicles, like the Toyota Prius. The battery manufacturers seem to focus more on technology development than cost reduction at this point. An important technological issue as of now is to improve thermal management in order to increase life of the batteries. But when the technological goals are met focus must shift to cost minimization and marketing if the battery electric vehicle shall make a market break through.

  16. The Impact of Training on the Time Required to Implement Technology in the Classroom

    Science.gov (United States)

    Stevens, Troy

    2014-01-01

    Many teachers are using technology to improve student achievement, but only a few are attaining an improvement in student achievement. The purpose of this quantitative study was to identify: (1) how much time teachers spend integrating technology into their classroom, (2) how much time teachers believe is required to maximize the effectiveness of…

  17. An overview of exhaust emissions regulatory requirements and control technology for stationary natural gas engines

    International Nuclear Information System (INIS)

    Ballard, H.N.; Hay, S.C.; Shade, W.N. Jr.

    1992-01-01

    In this paper a practical overview of stationary natural gas engine exhaust emissions control technology and trends in emissions regulatory requirements is presented. Selective and non-selective catalytic reduction and lean burn technologies are compared. Particular emphasis is focussed on implications of the Clean Air Act of 1990. Recent emissions reduction conversion kit developments and a practical approach to continuous monitoring are discussed

  18. Behind the development of technology: The transition of innovation modes in China’s wind turbine manufacturing industry

    International Nuclear Information System (INIS)

    Ru Peng; Zhi Qiang; Zhang Fang; Zhong Xiaotian; Li Jianqiang; Su Jun

    2012-01-01

    The market scale of China’s wind turbine manufacturing industry has grown immensely. Despite China still having a limited capacity in terms of technology innovation, the institutional support has promoted the technology capability development of the wind turbine manufacturing industry. This paper explores the driving forces underlying this development by reviewing the transition of the innovation modes and the dynamic interactions among the technology capability, innovation modes, market formation, and wind energy policy. The innovation mode in China began with imitative innovation, then transitioned to cooperative innovation, and has more recently set its sights on attaining truly indigenous innovation. Public policy serves as a key driving force for the evolution of innovation modes, as well as the development of the market. The policy focus has evolved in the following sequence: 1. building the foundation for technological innovation; 2. encouraging technology transfer; 3. enhancing local R and D and manufacturing capabilities; 4. enlarging the domestic market; and 5. cultivating an open environment for global competition and sustainable market development in China. - Highlights: ► New data were provided for China’s wind turbine manufacturing industry. ► The transition of innovation modes in the industry is reviewed. ► The interaction among the technology, market, policy, and innovation mode is explored. ► Public policies are the key driving forces for the transition.

  19. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Third Results Reports

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2012-05-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. NREL has previously published two reports documenting the operation of the fuel cell bus in service. This report provides a summary of the results with a focus on the bus operation from July 2011 through January 2012.

  20. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Second Results Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2011-10-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This is the second results report for the AT fuel cell bus since it was placed in service, and it focuses on the newest data analysis and lessons learned since the previous report. The appendices, referenced in the main report, provide the full background for the evaluation. They will be updated as new information is collected but will contain the original background material from the first report.

  1. L(sub 1) Adaptive Flight Control System: Flight Evaluation and Technology Transition

    Science.gov (United States)

    Xargay, Enric; Hovakimyan, Naira; Dobrokhodov, Vladimir; Kaminer, Isaac; Gregory, Irene M.; Cao, Chengyu

    2010-01-01

    Certification of adaptive control technologies for both manned and unmanned aircraft represent a major challenge for current Verification and Validation techniques. A (missing) key step towards flight certification of adaptive flight control systems is the definition and development of analysis tools and methods to support Verification and Validation for nonlinear systems, similar to the procedures currently used for linear systems. In this paper, we describe and demonstrate the advantages of L(sub l) adaptive control architectures for closing some of the gaps in certification of adaptive flight control systems, which may facilitate the transition of adaptive control into military and commercial aerospace applications. As illustrative examples, we present the results of a piloted simulation evaluation on the NASA AirSTAR flight test vehicle, and results of an extensive flight test program conducted by the Naval Postgraduate School to demonstrate the advantages of L(sub l) adaptive control as a verifiable robust adaptive flight control system.

  2. 77 FR 35199 - Swap Data Recordkeeping and Reporting Requirements: Pre-Enactment and Transition Swaps

    Science.gov (United States)

    2012-06-12

    .... Summary of the Proposed Part 46 Rule 1. Fundamental Goals 2. Historical Swap Recordkeeping 3. Historical... Consumer Protection Act, Public Law 111-203, 124 Stat. 1376 (2010). The text of the Dodd- Frank Act may be...-enactment swaps and transition swaps as ``historical swaps.'' \\16\\ Subsection (A) of CEA Section 2(h)(5...

  3. Definition of common support equipment and space station interface requirements for IOC model technology experiments

    Science.gov (United States)

    Russell, Richard A.; Waiss, Richard D.

    1988-01-01

    A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

  4. A survey of clinical performance skills requirements in medical radiation technology

    International Nuclear Information System (INIS)

    Rowntree, P.A.; Veitch, J.D.

    1993-01-01

    This paper outlines the reasons behind carry out a study of clinical performance skills requirements and the method being used to gather data. It describes the changes which have occurred in radiographer education in Queensland, the broader impact brought about by changes in professional body requirements and the development of a Competency based Standards Document for the profession. The paper provides examples of the survey design and layout being developed for distribution to third year students in the Medical Imaging Technology major of the Bachelor of Applied Science (Medical Radiation Technology) Queensland University of Technology, graduates and clinical departments in Queensland. 1 tab., 1 fig

  5. Just in time: technology to disseminate curriculum and manage educational requirements with mobile technology.

    Science.gov (United States)

    Ferenchick, Gary; Fetters, Moses; Carse, A Mervyn

    2008-01-01

    Learning objectives intended to guide clinical education may be of limited usefulness if they are unavailable to students when interacting with patients. We developed, implemented, and evaluated a Web-based process to disseminate the Clerkship Directors of Internal Medicine curricular objectives to students via handheld computers and for students to upload patient logs to a central database. We delivered this program to all students in our geographically dispersed system, with minimal technological problems. The total number of "hits" on curricular objectives was 8,932 (averaging 149 per student or approximately 2.7 times daily). The average number of "hits" per problem was 470, ranging from 18 for smoking cessation to 1,784 for chest pain. The total number of patient problems logged by students was 9,579, and 91% of students met our prespecified criteria for numbers and types of patients. Dissemination and use of curricular learning objectives and related tools is enhanced with mobile technology.

  6. A Conceptual Methodology for Assessing Acquisition Requirements Robustness against Technology Uncertainties

    Science.gov (United States)

    Chou, Shuo-Ju

    2011-12-01

    In recent years the United States has shifted from a threat-based acquisition policy that developed systems for countering specific threats to a capabilities-based strategy that emphasizes the acquisition of systems that provide critical national defense capabilities. This shift in policy, in theory, allows for the creation of an "optimal force" that is robust against current and future threats regardless of the tactics and scenario involved. In broad terms, robustness can be defined as the insensitivity of an outcome to "noise" or non-controlled variables. Within this context, the outcome is the successful achievement of defense strategies and the noise variables are tactics and scenarios that will be associated with current and future enemies. Unfortunately, a lack of system capability, budget, and schedule robustness against technology performance and development uncertainties has led to major setbacks in recent acquisition programs. This lack of robustness stems from the fact that immature technologies have uncertainties in their expected performance, development cost, and schedule that cause to variations in system effectiveness and program development budget and schedule requirements. Unfortunately, the Technology Readiness Assessment process currently used by acquisition program managers and decision-makers to measure technology uncertainty during critical program decision junctions does not adequately capture the impact of technology performance and development uncertainty on program capability and development metrics. The Technology Readiness Level metric employed by the TRA to describe program technology elements uncertainties can only provide a qualitative and non-descript estimation of the technology uncertainties. In order to assess program robustness, specifically requirements robustness, against technology performance and development uncertainties, a new process is needed. This process should provide acquisition program managers and decision

  7. 23 CFR 950.5 - Requirement to use electronic toll collection technology.

    Science.gov (United States)

    2010-04-01

    ... shall use an electronic toll collection system as the method for collecting tolls from vehicle operators... 23 Highways 1 2010-04-01 2010-04-01 false Requirement to use electronic toll collection technology... TRANSPORTATION SYSTEMS ELECTRONIC TOLL COLLECTION § 950.5 Requirement to use electronic toll collection...

  8. Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Contingency Management

    Science.gov (United States)

    2005-01-01

    This document involves definition of technology interface requirements for Contingency Management. This was performed through a review of Contingency Management-related, HSI requirements documents, standards, and recommended practices. Technology concepts in use by the Contingency Management Work Package were considered. Beginning with HSI high-level functional requirements for Contingency Management, and Contingency Management technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of system failures and associated contingency procedures, and (2) the control capability needed by the pilot to obtain system status and procedure information. Fundamentally, these requirements provide the candidate Contingency Management technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Contingency Management operations and functions should interface with the pilot to provide the necessary Contingency Management functionality to the UA-pilot system. Requirements and guidelines for Contingency Management are partitioned into four categories: (1) Health and Status and (2) Contingency Management. Each requirement is stated and is supported with a rationale and associated reference(s).

  9. 40 CFR 51.912 - What requirements apply for reasonably available control technology (RACT) and reasonably...

    Science.gov (United States)

    2010-07-01

    ...) What is the Reasonably Available Control Measures (RACM) requirement for areas designated nonattainment... 40 Protection of Environment 2 2010-07-01 2010-07-01 false What requirements apply for reasonably available control technology (RACT) and reasonably available control measures (RACM) under the 8-hour NAAQS...

  10. Requirements for effective technology transfer for engineering and project management. The views of the recipient country and the technology supplier

    International Nuclear Information System (INIS)

    Backhaus, K.W.

    1986-04-01

    Technology transfer in the area of engineering and project management for nuclear power plant projects is considered a rather complex and sophisticated matter. Therefore only within a long-term nuclear co-operation a meaningful transfer of such a multifaceted technology can reasonably be achieved. A long-term nuclear co-operation anticipates a nuclear power plant program consisting of a few nuclear power plants of a certain type and size in order to achieve the indispensable effect ''learning by doing''. The objectives of nuclear technology transfer may be in general or in particular; absorption of a foreign nuclear technology and its adaptation to the conditions and needs of the receiver's country; built-up of industrial infrastructure for planning, construction and operation of nuclear power plants; raising of the general industrial level and achieve a spin-off effect; creation of a basis for independent development of nuclear technology. The technology transfer on one side and the construction program of nuclear power plants on the other side cannot be practiced by two parallel but separated event, however, they form one unit. Contrary to the import of industrial equipment in terms of ''black box'', by means of a nuclear technology transfer the introduction of new dependencies will be prevented. The technology transfer can remarkably be facilitated by forming a joint venture engineering company in the recipient country. The required know-how potential within a certain time period determines the intensity of the technology transfer and consequently the man power to be involved. The realization of such technology transfer is demonstrated by means of practical examples. (author). 12 figs

  11. Waste disposal technology transfer matching requirement clusters for waste disposal facilities in China

    International Nuclear Information System (INIS)

    Dorn, Thomas; Nelles, Michael; Flamme, Sabine; Jinming, Cai

    2012-01-01

    Highlights: ► We outline the differences of Chinese MSW characteristics from Western MSW. ► We model the requirements of four clusters of plant owner/operators in China. ► We examine the best technology fit for these requirements via a matrix. ► Variance in waste input affects result more than training and costs. ► For China technology adaptation and localisation could become push, not pull factors. - Abstract: Even though technology transfer has been part of development aid programmes for many decades, it has more often than not failed to come to fruition. One reason is the absence of simple guidelines or decision making tools that help operators or plant owners to decide on the most suitable technology to adopt. Practical suggestions for choosing the most suitable technology to combat a specific problem are hard to get and technology drawbacks are not sufficiently highlighted. Western counterparts in technology transfer or development projects often underestimate or don’t sufficiently account for the high investment costs for the imported incineration plant; the differing nature of Chinese MSW; the need for trained manpower; and the need to treat flue gas, bunker leakage water, and ash, all of which contain highly toxic elements. This article sets out requirements for municipal solid waste disposal plant owner/operators in China as well as giving an attribute assessment for the prevalent waste disposal plant types in order to assist individual decision makers in their evaluation process for what plant type might be most suitable in a given situation. There is no ‘best’ plant for all needs and purposes, and requirement constellations rely on generalisations meaning they cannot be blindly applied, but an alignment of a type of plant to a type of owner or operator can realistically be achieved. To this end, a four-step approach is suggested and a technology matrix is set out to ease the choice of technology to transfer and avoid past errors. The four

  12. Integrated Corridor Management (ICM) Initiative : ICM Surveillance and Detection Requirements for Arterial and Transit Networks

    Science.gov (United States)

    2008-10-01

    The primary objective of the ICM Initiative is to demonstrate how Intelligent Transportation System (ITS) technologies can efficiently and proactively facilitate the movement of people and goods through major transportation corridors that comprise a ...

  13. Step 1: Human System Integration Pilot-Technology Interface Requirements for Weather Management

    Science.gov (United States)

    2005-01-01

    This document involves definition of technology interface requirements for Hazardous Weather Avoidance. Technology concepts in use by the Access 5 Weather Management Work Package were considered. Beginning with the Human System Integration (HIS) high-level functional requirement for Hazardous Weather Avoidance, and Hazardous Weather Avoidance technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of hazardous weather, and (2) the control capability needed by the pilot to obtain hazardous weather information. Fundamentally, these requirements provide the candidate Hazardous Weather Avoidance technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Hazardous Weather Avoidance operations and functions should interface with the pilot to provide the necessary Weather Management functionality to the UA-pilot system. Requirements and guidelines for Hazardous Weather Avoidance are partitioned into four categories: (1) Planning En Route (2) Encountering Hazardous Weather En Route, (3) Planning to Destination, and (4) Diversion Planning Alternate Airport. Each requirement is stated and is supported with a rationale and associated reference(s).

  14. Capsicum annuum S (CaS) promotes reproductive transition and is required for flower formation in pepper (Capsicum annuum).

    Science.gov (United States)

    Cohen, Oded; Borovsky, Yelena; David-Schwartz, Rakefet; Paran, Ilan

    2014-05-01

    The genetic control of the transition to flowering has mainly been studied in model species, while few data are available in crop species such as pepper (Capsicum spp.). To elucidate the genetic control of the transition to flowering in pepper, mutants that lack flowers were isolated and characterized. Genetic mapping and sequencing allowed the identification of the gene disrupted in the mutants. Double mutants and expression analyses were used to characterize the relationships between the mutated gene and other genes controlling the transition to flowering and flower differentiation. The mutants were characterized by a delay in the initiation of sympodial growth, a delay in the termination of sympodial meristems and complete inhibition of flower formation. Capsicum annuum S (CaS), the pepper (Capsicum annuum) ortholog of tomato (Solanum lycopersicum) COMPOUND INFLORESCENCE and petunia (Petunia hybrida) EVERGREEN, was found to govern the mutant phenotype. CaS is required for the activity of the flower meristem identity gene Ca-ANANTHA and does not affect the expression of CaLEAFY. CaS is epistatic over other genes controlling the transition to flowering with respect to flower formation. Comparative homologous mutants in the Solanaceae indicate that CaS has uniquely evolved to have a critical role in flower formation, while its role in meristem maturation is conserved in pepper, tomato and petunia. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.

  15. Base technology development enhances state-of-the-art in meeting performance requirements

    International Nuclear Information System (INIS)

    Freedman, J.M.; Allen, G.C. Jr.; Luna, R.E.

    1987-01-01

    Sandia National Laboratories (SNL) has responsibility to the United States Department of Energy (DOE) for baseline technology to support the design of radioactive material transportation packages. To fulfill this responsibility, SNL works with industry, government agencies, and national laboratories to identify and develop state-of-the-art technology required to design and test safe, cost-effective radioactive materials packages. Principal elements of the base technology program include: 1) analysis techniques, 2) testing, 3) subsystem and component development, 4) packaging systems development support, and 5) technical support for policy development. These program elements support a systems approach for meeting performance requirements and assure that there is a sound underlying technical basis for both transportation packaging design and associated policy decisions. Highlights from the base technology program included in this paper are testing, design and analysis methods, advanced materials, risk assessment and logistics models, and transportation package support

  16. Environmental control and life support system requirements and technology needs for advanced manned space missions

    Science.gov (United States)

    Powell, Ferolyn T.; Sedej, Melaine; Lin, Chin

    1987-01-01

    NASA has completed an environmental control and life support system (ECLSS) technology R&D plan for advanced missions which gave attention to the drivers (crew size, mission duration, etc.) of a range of manned missions under consideration. Key planning guidelines encompassed a time horizon greater than 50 years, funding resource requirements, an evolutionary approach to goal definition, and the funding of more than one approach to satisfy a given perceived requirement. Attention was given to the ECLSS requirements of transportation and service vehicles, platforms, bases and settlements, ECLSS functions and average load requirements, unique drivers for various missions, and potentially exploitable commonalities among vehicles and habitats.

  17. Technology and Research Requirements for Combating Human Trafficking: Enhancing Communication, Analysis, Reporting, and Information Sharing

    Energy Technology Data Exchange (ETDEWEB)

    Kreyling, Sean J.; West, Curtis L.; Olson, Jarrod

    2011-03-17

    DHS’ Science & Technology Directorate directed PNNL to conduct an exploratory study on the domain of human trafficking in the Pacific Northwest in order to examine and identify technology and research requirements for enhancing communication, analysis, reporting, and information sharing – activities that directly support efforts to track, identify, deter, and prosecute human trafficking – including identification of potential national threats from smuggling and trafficking networks. This effort was conducted under the Knowledge Management Technologies Portfolio as part of the Integrated Federal, State, and Local/Regional Information Sharing (RISC) and Collaboration Program.

  18. Energy and lysine requirements and balances of sows during transition and lactation: A factorial approach

    DEFF Research Database (Denmark)

    Feyera, Takele; Theil, Peter Kappel

    2017-01-01

    components (including uterus wall, placenta and membrane fluids) and maintenance were estimated. It was estimated that maintenance, additional heat loss, colostrum production, fetal growth, mammary growth and uterine components accounted for 66.8%, 19.3%, 7.2%, 5.0%, 1.3% and 0.5% of total ME requirements......, respectively, in the last 12 days of gestation. Oxidation/transamination, fetal growth, mammary growth, colostrum production, maintenance and uterine components were estimated to account for 29.5%, 22.7%, 16.8%, 16.1%, 10.4% and 4.5% of total SID lysine requirements, respectively, in the last 12 days...... of gestation. After parturition, ME and SID lysine requirements increased daily until peak lactation (day 17). At peak lactation, 95% and 72% of total required SID lysine and ME, respectively, were associated with milk production (including oxidation). Relative to day 104 of gestation, ME and SID lysine...

  19. Energy access and transition to cleaner cooking fuels and technologies in Sri Lanka: Issues and policy limitations

    International Nuclear Information System (INIS)

    Wickramasinghe, Anoja

    2011-01-01

    Easy energy access is a trigger for human, social, and economic development. A research project was undertaken in Sri Lanka to broaden the understanding of human dimension of energy access and technologies. A questionnaire survey, covering 2269 households, gathered data on socio-economic contexts and issues influencing a transition towards clean cooking facilities. The findings reveal that the transition is impeded by four factors: the lack of motivation and the pressure for switching over to cleaner facilities, the lack of modern energy technology options, the financial risks, and the lack of financing and other support. The paper describes the delicate two-way interrelation between women earning wages and the transitions to cleaner cooking fuels and technologies. The findings suggest the need for a policy framework involving the stakeholders, financing and standardised technologies. To make a change it is proposed to introduce a national, integrated policy incorporating financing and energy governance. - Highlights: ► Households in Sri Lanka lack access to modern energy technology options for cooking. ► Cooking with fuel wood and residues is the norm in Sri Lanka, particularly in rural households. ► A survey of rural households revealed that most cannot afford to switch to cleaner cooking options. ► Most households have little awareness of the health impacts of biomass cooking. ► Women in regular formal employment are more likely to value cleaner cooking options that save time.

  20. Pharmacy in transition: A work sampling study of community pharmacists using smartphone technology.

    Science.gov (United States)

    van de Pol, Jeroen M; Geljon, Jurjen G; Belitser, Svetlana V; Frederix, Geert W J; Hövels, Anke M; Bouvy, Marcel L

    2018-03-09

    The nature of community pharmacy is changing, shifting from the preparation and distribution of medicines to the provision of cognitive pharmaceutical services (CPS); however, often the provision of traditional services leaves little time for innovative services. This study investigated the time community pharmacists spend on the tasks and activities of daily practice and to what extent they are able to implement CPS-related services in daily practice. Self-reporting work sampling was used to register the activities of community pharmacists. A smartphone application, designed specifically for this purpose, alerted participants to register their current activity five times per working day for 6 weeks. Participants also completed an online survey about baseline characteristics. Ninety-one Dutch community pharmacists provided work-sampling data (7848 registered activities). Overall, 51.5% of their time was spent on professional activities, 35.4% on semi-professional activities, and 13.1% on non-professional activities. The proportion of time devoted to CPS decreased during the workweek, whereas the time spent on traditional task increased. This study shows it is feasible to collect work-sampling data using smartphone technology. Community pharmacists spent almost half of their time on semi-professional and non-professional activities, activities that could be delegated to other staff members. In practice, the transition to CPS is hampered by competing traditional tasks, which prevents community pharmacists from profiling themselves as pharmaceutical experts in daily practice. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

  1. Waste disposal technology transfer matching requirement clusters for waste disposal facilities in China.

    Science.gov (United States)

    Dorn, Thomas; Nelles, Michael; Flamme, Sabine; Jinming, Cai

    2012-11-01

    Even though technology transfer has been part of development aid programmes for many decades, it has more often than not failed to come to fruition. One reason is the absence of simple guidelines or decision making tools that help operators or plant owners to decide on the most suitable technology to adopt. Practical suggestions for choosing the most suitable technology to combat a specific problem are hard to get and technology drawbacks are not sufficiently highlighted. Western counterparts in technology transfer or development projects often underestimate or don't sufficiently account for the high investment costs for the imported incineration plant; the differing nature of Chinese MSW; the need for trained manpower; and the need to treat flue gas, bunker leakage water, and ash, all of which contain highly toxic elements. This article sets out requirements for municipal solid waste disposal plant owner/operators in China as well as giving an attribute assessment for the prevalent waste disposal plant types in order to assist individual decision makers in their evaluation process for what plant type might be most suitable in a given situation. There is no 'best' plant for all needs and purposes, and requirement constellations rely on generalisations meaning they cannot be blindly applied, but an alignment of a type of plant to a type of owner or operator can realistically be achieved. To this end, a four-step approach is suggested and a technology matrix is set out to ease the choice of technology to transfer and avoid past errors. The four steps are (1) Identification of plant owner/operator requirement clusters; (2) Determination of different municipal solid waste (MSW) treatment plant attributes; (3) Development of a matrix matching requirement clusters to plant attributes; (4) Application of Quality Function Deployment Method to aid in technology localisation. The technology transfer matrices thus derived show significant performance differences between the

  2. Evolving Technologies Require Educational Policy Change: Music Education for the 21st Century

    Science.gov (United States)

    Crawford, Renee

    2013-01-01

    There is growing discussion among education and government authorities on rethinking education in the 21st century. This increasing area of interest has come in response to the evolution of technology and its effect on the future needs and requirements of society. Online applications and social networking capabilities have accelerated in…

  3. Employers' Perceptions of Information Technology Competency Requirements for Management Accounting Graduates

    Science.gov (United States)

    Spraakman, Gary; O'Grady, Winifred; Askarany, Davood; Akroyd, Chris

    2015-01-01

    Management accountants work in a computerized workplace with information technology (IT) for producing financial ledgers and for reporting. Thus, the role of the management accountant has shifted from capturing and recording transactions to analyzing business issues. The research question is: what IT knowledge and skills do employers require of…

  4. Technology Requirements and Development for Affordable High-Temperature Distributed Engine Controls

    Science.gov (United States)

    2012-06-04

    long lasting, high temperature modules is to use high temperature electronics on ceramic modules. The electronic components are “ brazed ” onto the...Copyright © 2012 by ISA Technology Requirements and Development for Affordable High - Temperature Distributed Engine Controls Alireza Behbahani 1...with regards to high temperature capability. The Government and Industry Distributed Engine Controls Working Group (DECWG) [5] has been established

  5. A 10-Year Assessment of Information and Communication Technology Tasks Required in Undergraduate Agriculture Courses

    Science.gov (United States)

    Edgar, Leslie D.; Johnson, Donald M.; Cox, Casandra

    2012-01-01

    This study sought to assess required information and communication technology (ICT) tasks in selected undergraduate agriculture courses in a land-grant university during a 10-year period. Selected agriculture faculty members in the fall 1999 (n = 63), 2004 (n = 55), and 2009 (n = 64) semesters were surveyed to determine the ICT tasks they required…

  6. Consequences for people from changed economic requirements and implementations of new technology

    International Nuclear Information System (INIS)

    Myhre, L.A.

    1994-01-01

    The offshore oil and gas business has reached mature levels where improvements and efficiency, optimisation and down-sizing are necessary to achieve required economic performance. The paper discusses the oil worker in future with the focus on manning and safety as a consequence of new technologies and cost reduction. 1 fig

  7. 47 CFR 15.120 - Program blocking technology requirements for television receivers.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Program blocking technology requirements for television receivers. 15.120 Section 15.120 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO... transmitted pursuant to industry standard EIA/CEA-766-A “U.S. and Canadian Region Rating Tables (RRT) and...

  8. 49 CFR 171.14 - Transitional provisions for implementing certain requirements.

    Science.gov (United States)

    2010-10-01

    ... hazardous material prior to October 1, 1991; (iii) Is marked “Inhalation Hazard” if appropriate, in... poisonous by inhalation for which the packaging was authorized under the requirements of part 172 or part.... (h) The proper shipping name “Gasohol gasoline mixed with ethyl alcohol, with not more than 20...

  9. International Nuclear Management Academy Requirements for University Master’s Programmes in Nuclear Technology Management

    International Nuclear Information System (INIS)

    Grosbois, J. de; Hirose, H.; Adachi, F.; Liu, L.; Hanamitsu, K.; Kosilov, A.; Roberts, J.

    2016-01-01

    Full text: The development of any national nuclear energy programme is dependent on the successful development of qualified human resources, through a sustainable nuclear education and training programmes supported by government and industry. Among the broad range of specialists needed for the continued safe and economic utilization of nuclear technology for peaceful purposes, are a most vital component—managers. The International Nuclear Management Academy (INMA) is an IAEA facilitated collaboration framework in which universities provide master’s degree programmes focusing on the management aspect for the nuclear sector. INMA master’s programmes in Nuclear Technology Management (NTM) specify a common set of competency requirements that graduates should acquire to prepare them to become competent managers. This paper presents an overview of the INMA collaboration framework and the requirements for partner universities to implement master’s programmes in Nuclear Technology Management. (author

  10. Virtual environment and computer-aided technologies used for system prototyping and requirements development

    Science.gov (United States)

    Logan, Cory; Maida, James; Goldsby, Michael; Clark, Jim; Wu, Liew; Prenger, Henk

    1993-01-01

    The Space Station Freedom (SSF) Data Management System (DMS) consists of distributed hardware and software which monitor and control the many onboard systems. Virtual environment and off-the-shelf computer technologies can be used at critical points in project development to aid in objectives and requirements development. Geometric models (images) coupled with off-the-shelf hardware and software technologies were used in The Space Station Mockup and Trainer Facility (SSMTF) Crew Operational Assessment Project. Rapid prototyping is shown to be a valuable tool for operational procedure and system hardware and software requirements development. The project objectives, hardware and software technologies used, data gained, current activities, future development and training objectives shall be discussed. The importance of defining prototyping objectives and staying focused while maintaining schedules are discussed along with project pitfalls.

  11. Planetary mission requirements, technology and design considerations for a solar electric propulsion stage

    Science.gov (United States)

    Cork, M. J.; Hastrup, R. C.; Menard, W. A.; Olson, R. N.

    1979-01-01

    High energy planetary missions such as comet rendezvous, Saturn orbiter and asteroid rendezvous require development of a Solar Electric Propulsion Stage (SEPS) for augmentation of the Shuttle-IUS. Performance and functional requirements placed on the SEPS are presented. These requirements will be used in evolution of the SEPS design, which must be highly interactive with both the spacecraft and the mission design. Previous design studies have identified critical SEPS technology areas and some specific design solutions which are also presented in the paper.

  12. To Evaluate Zero Emission Propulsion and Support Technology for Transit Buses

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Chandler; Leslie Eudy

    2006-11-01

    This report provides evaluation results for prototype fuel cell transit buses operating at Santa Clara Valley Transportation Authority (VTA) in San Jose, California, in partnership with the San Mateo County Transit District in San Carlos, California. VTA has been operating three fuel cell transit buses in extra revenue service since February 28, 2005. This report provides descriptions of the equipment used, early experiences, and evaluation results from the operation of the buses and the supporting hydrogen infrastructure from March 2005 through July 2006.

  13. Transitioning Submersible Chemical Analyzer Technologies for Sustained, Autonomous Observations from Profiling Moorings, Gliders and other AUVs

    National Research Council Canada - National Science Library

    Hanson, Alfred K; Donaghay, Percy L; Moore, Casey; Arrieta, Richard

    2005-01-01

    The long term goal is to transition existing prototype autonomous profiling nutrient analyzers into commercial products that can be readily deployed on autonomous profiling moorings, coastal gliders...

  14. Transitioning Submersible Chemical Analyzer Technologies for Sustained, Autonomous Observations From Profiling Moorings, Gliders and other AUVs

    National Research Council Canada - National Science Library

    Hanson, Alfred K; Donaghay, Percy L; Moore, Casey; Arrieta, Richard

    2006-01-01

    The long term goal is to transition existing prototype autonomous profiling nutrient analyzers into commercial products that can be readily deployed on autonomous profiling moorings, coastal gliders...

  15. Modulation of apical constriction by Wnt signaling is required for lung epithelial shape transition.

    Science.gov (United States)

    Fumoto, Katsumi; Takigawa-Imamura, Hisako; Sumiyama, Kenta; Kaneiwa, Tomoyuki; Kikuchi, Akira

    2017-01-01

    In lung development, the apically constricted columnar epithelium forms numerous buds during the pseudoglandular stage. Subsequently, these epithelial cells change shape into the flat or cuboidal pneumocytes that form the air sacs during the canalicular and saccular (canalicular-saccular) stages, yet the impact of cell shape on tissue morphogenesis remains unclear. Here, we show that the expression of Wnt components is decreased in the canalicular-saccular stages, and that genetically constitutive activation of Wnt signaling impairs air sac formation by inducing apical constriction in the epithelium as seen in the pseudoglandular stage. Organ culture models also demonstrate that Wnt signaling induces apical constriction through apical actomyosin cytoskeletal organization. Mathematical modeling reveals that apical constriction induces bud formation and that loss of apical constriction is required for the formation of an air sac-like structure. We identify MAP/microtubule affinity-regulating kinase 1 (Mark1) as a downstream molecule of Wnt signaling and show that it is required for apical cytoskeletal organization and bud formation. These results suggest that Wnt signaling is required for bud formation by inducing apical constriction during the pseudoglandular stage, whereas loss of Wnt signaling is necessary for air sac formation in the canalicular-saccular stages. © 2017. Published by The Company of Biologists Ltd.

  16. Appraisal of Information Technology Requirements in Quantity Surveying Firms in Northern Nigeria

    Directory of Open Access Journals (Sweden)

    Y. U. Datti

    2017-06-01

    Full Text Available A worrisome trend in the adoption of emerging technologies for competitive advantages and improved productivities by QSs have been observed in that there is overwhelming evidence that there is an increasing usage of IT in quantity surveying firms but little or no noticeable benefits on the practice. It however becomes pertinent to ask then, that despite the increases adoption of computing and telecommunication technologies, why isn’t there any noticeable change due to the impacts of IT in the Nigerian Construction Industry with particular reference to Quantity Surveying practices. The study appraised the requirement of IT in quantity surveying practice in Nigeria. It examined the position of IT in quantity surveying firms in terms of its requirement and analyzed IT requirements-based problem constraining quantity surveying firms. The study is a survey research designed to obtain information on information technology in QS firms. A self-administered questionnaire was employed to quantity surveyors in consulting firms for responses. Responses were returned and analyzed using severity index and later ranked in order of importance. The results indicate a high level of computerization of professional services among the firms with greater number of their computers being networked. However, despite high level of networking of available computers, sharing of printers and other scarce tools/technologies are not established. Compared to developed countries such as Canada, Australia, United Kingdom and USA, the position of IT requirements in QS firms in Nigeria can be said to be at basic level with organization possessing and applying basic IT tools and technologies (e.g. scanners, digital cameras, dvd/cd-rom, general purpose software, QS application software, chat programs etc. in their daily operation and processes. While most firms are progressing toward intermediate level by possessing intermediate IT tools and technologies (e.g. teleconferencing

  17. Requirements and solutions for future pellet technology; Krav och loesningar foer framtidens pelletsteknik

    Energy Technology Data Exchange (ETDEWEB)

    Paulrud, Susanne; Roennbaeck, Marie; Ryde, Daniel; Laitila, Thomas

    2010-07-01

    Requirements and solutions for future pellet burning technologies Since 2006, sales of pellet burning technologies to the Swedish residential market have fallen. The main reasons for this decrease are: many of the economically favorable easy conversions from oil to pellets have been made; competition from heat pumps; warm winters; a stable electricity price; and the current structure of heating in residential buildings, where electric heating dominates. To change this falling trend pellets need to become more attractive to consumers. This project aimed to analyze the requirements for the next generation of pellets systems and to develop potential solutions, in collaboration with the pellets industry. More specifically, the study looked at consumers' attitudes toward heating choices and different heating through a survey to 2000 house owners across Sweden. The project included a market analysis of Swedish and international technologies and examines the conditions for Swedish pellet burning technology in different markets. In addition, new solutions and developments for Swedish pellets burning technology are described

  18. Tet1 is required for Rb phosphorylation during G1/S phase transition

    International Nuclear Information System (INIS)

    Huang, Shengsong; Zhu, Ziqi; Wang, Yiqin; Wang, Yanru; Xu, Longxia; Chen, Xuemei; Xu, Qing; Zhang, Qimin; Zhao, Xin; Yu, Yi; Wu, Denglong

    2013-01-01

    Highlights: •Tet1 was required for NIT3T3 proliferation. •Tet1 depletion inhibited G1-S entry. •Cyclin D1 accumulation and Rb phosphorylation was blocked by Tet1 knockdown. -- Abstract: DNA methylation plays an important role in many biological processes, including regulation of gene expression, maintenance of chromatin conformation and genomic stability. TET-family proteins convert 5-methylcytosine (5mC) to 5-hydroxymethylcytosine (5hmC), which indicates that these enzymes may participate in DNA demethylation. The function of TET1 has not yet been well characterized in somatic cells. Here, we show that depletion of Tet1 in NIH3T3 cells inhibits cell growth. Furthermore, Tet1 knockdown blocks cyclin D1 accumulation in G1 phase, inhibits Rb phosphorylation and consequently delays entrance to G1/S phase. Taken together, this study demonstrates that Tet1 is required for cell proliferation and that this process is mediated through the Rb pathway

  19. Parents' perspectives of the transition to home when a child has complex technological health care needs.

    LENUS (Irish Health Repository)

    Brenner, Maria

    2015-09-01

    There is an increasing number of children with complex care needs, however, there is limited evidence of the experience of families during the process of transitioning to becoming their child\\'s primary care giver. The aim of this study was to explore parents\\' perspectives of the transition to home of a child with complex respiratory health care needs.

  20. Post LANDSAT D Advanced Concept Evaluation (PLACE). [with emphasis on mission planning, technological forecasting, and user requirements

    Science.gov (United States)

    1977-01-01

    An outline is given of the mission objectives and requirements, system elements, system concepts, technology requirements and forecasting, and priority analysis for LANDSAT D. User requirements and mission analysis and technological forecasting are emphasized. Mission areas considered include agriculture, range management, forestry, geology, land use, water resources, environmental quality, and disaster assessment.

  1. Meeting United States re-licensing requirements related to environmental protection using innovative technologies

    International Nuclear Information System (INIS)

    Taft, E.P.; Winchell, F.C.; Cook, T.C.

    1998-01-01

    Procedure for meeting re-licensing requirements related to environmental protection and an overview of several new and emerging technologies regarding the development of ways to prevent fish passage through hydraulic turbines at hydroelectric power dams is described. Fish mortality and injury has long been a concern in the hydroelectric industry and research and development efforts have been ongoing since the 1970s to prevent fish passage through turbines. Several new and emerging technologies are examined that have the potential for wide-spread cost-effective applications

  2. Lunar base mission technology issues and orbital demonstration requirements on space station

    Science.gov (United States)

    Llewellyn, Charles P.; Weidman, Deene J.

    1992-01-01

    The International Space Station has been the object of considerable design, redesign, and alteration since it was originally proposed in early 1984. In the intervening years the station has slowly evolved to a specific design that was thoroughly reviewed by a large agency-wide Critical Evaluation Task Force (CETF). As space station designs continue to evolve, studies must be conducted to determine the suitability of the current design for some of the primary purposes for which the station will be used. This paper concentrates on the technology requirements and issues, the on-orbit demonstration and verification program, and the space station focused support required prior to the establishment of a permanently manned lunar base as identified in the National Commission on Space report. Technology issues associated with the on-orbit assembly and processing of the lunar vehicle flight elements are also discussed.

  3. 75 FR 62515 - Notice of Availability of Report on the Communications Requirements of Smart Grid Technologies

    Science.gov (United States)

    2010-10-12

    ...Through this notice, the Department of Energy (DOE) announces the availability of its report entitled, ``Communications Requirements of Smart Grid Technologies.'' In this report, DOE sets forth recommendations and observations on current and potential communications requirements of the Smart Grid, as well as the types of networks and communications services that may be used. DOE also provides a comprehensive summary of the comments received in response to a Request for Information and during a public meeting conducted during the preparation of the report. This report responds to recommendations for DOE set forth in the National Broadband Plan authored by the Federal Communications Commission at the direction of Congress.

  4. Inflammasome-independent NLRP3 is required for epithelial-mesenchymal transition in colon cancer cells.

    Science.gov (United States)

    Wang, Hong; Wang, Yajing; Du, Qianming; Lu, Ping; Fan, Huimin; Lu, Jinrong; Hu, Rong

    2016-03-15

    Inflammasome NLRP3 plays a crucial role in the process of colitis and colitis--associated colon cancer. Even though much is known regarding the NLRP3 inflammasome that regulates pro-inflammatory cytokine release in innate immune cells, the role of NLRP3 in non-immune cells is still unclear. In this study, we showed that NLRP3 was highly expressed in mesenchymal-like colon cancer cells (SW620), and was upregulated by tumor necrosis factors-α (TNF-α) and transforming growth factor-β1 (TGF-β1) respectively, during EMT in colon cancer epithelial cells HCT116 and HT29. Knockdown of NLRP3 retained epithelial spindle-like morphology of HCT116 and HT29 cells and reversed the mesenchymal characteristic of SW620 cells, indicated by the decreased expression of vimentin and MMP9 and increased expression of E-cadherin. In addition, knockdown of NLRP3 in colorectal carcinoma cells displayed diminished cell migration and invasion. Interestingly, during the EMT process induced by TNF-α or TGF-β1, the cleaved caspase-1 and ASC speck were not detected, indicating that NLRP3 functions in an inflammasome-independent way. Further studies demonstrated that NLRP3 protein expression was regulated by NF-κB signaling in TNF-α or TGF-β1-induced EMT, as verified by the NF-κB inhibitor Bay 11-7082. Moreover, NLRP3 knockdown reduced the expression of Snail1, indicating that NLRP3 may promote EMT through regulating Snail1. In summary, our results showed that the NLRP3 expression, not the inflammasome activation, was required for EMT in colorectal cancer cells. Copyright © 2016 Elsevier Inc. All rights reserved.

  5. Advanced architectures and the required technologies for next-generation communications satellite systems

    Science.gov (United States)

    Arnold, Ray; Naderi, F. Michael

    1988-01-01

    The hardware requirements for multibeam operation and onboard data processing and switching on future communication satellites are reviewed. Topics addressed include multiple-beam antennas, frequency-addressable beams, baseband vs IF switching, FDM/TDMA systems, and bulk demodulators. The proposed use of these technologies in the NASA ACTS, Italsat, and the Japanese ETS-VI is discussed in detail and illustrated with extensive diagrams, maps, drawings, and tables of projected performance data.

  6. Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

    Science.gov (United States)

    Hanley, G.

    1978-01-01

    Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

  7. The role of advanced nuclear power technologies in developing countries: Criteria and design requirements

    International Nuclear Information System (INIS)

    1990-02-01

    The document includes the papers presented at the following two technical committee meetings organized by the IAEA: Technical Committee Meeting and Workshop on Criteria for the Introduction of Advanced Nuclear Power Technologies for Specific Applications in Developing Countries, Vienna, 27-30 June 1988 (14 papers) and Technical Committee Meeting and Workshop on Design Requirements for the Application of Advanced Concepts in Developing Countries, Vienna, 6-9 December 1988 (16 papers). A separate abstract was prepared for each of these papers

  8. Nuclear power of the coming century and requirements to the nuclear technology

    International Nuclear Information System (INIS)

    Orlov, V.; Leonov, V.; Sila-Novitski, A.; Smirnov, V.; Tsikunov, V.; Filin, A.

    2001-01-01

    Current state of nuclear power in the world has been considered and the reasons for its falling short of the great expectations relating to its vigorous development in the outgoing century are considered. Anticipated energy demand of mankind in the next century is evaluated, suggesting that with exhausted resources of cheap fossil fuel and ecological restrictions it can be satisfied by means of a new nuclear technology meeting the requirements of large-scale power generation in terms of safety and economic indices, moreover, the technology can be elaborated in the context of achievements made in civil and military nuclear engineering. Since the developing countries are the most interested parties, it is just their initiative in the development of nuclear technology at the next stage that could provide an impetus for its actual advance. It is shown that large-scale development of nuclear power, being adequate to increase in energy demand, is possible even if solely large NPP equipped with breeders providing BR≥1 are constructed. Requirements for the reactor and fuel cycle technologies are made, their major aspects being: efficient utilization of Pu accumulated and reduction of U specific consumption by at least an order of magnitude; natural inherent safety and deterministic elimination of accidents involving high radioactive releases; assurance of a balance between radiation hazard posed by radioactive wastes disposed and uranium extracted from the ground; nuclear weapons nonproliferation due to fuel reprocessing ruling out potentiality of Pu diversion; reduction of the new generation reactor costs below the costs of today's LWR. (author)

  9. Tritium interactions of potential importance to fusion reactor systems: technology requirements

    International Nuclear Information System (INIS)

    Wilkes, W.R.

    1976-01-01

    The tritium technology requirements created by the controlled thermonuclear research program to develop a demonstration fusion power reactor by the year 2000 are reviewed. It is found that the majority of the technological advances which are needed to ensure adequate tritium containment in a tritium breeding power reactor need to be demonstrated on a pilot scale by approximately 1983, so that they may be incorporated into EPR-II, the second of two planned experimental power reactors. The most important advances include development of containment materials with permeabilities to tritium well below measured values for stainless steel; large scale, low inventory deuterium-tritium separation systems; and improved monitoring and assay systems. There are less critical requirements for information about the effects of tritium and helium on the mechanical properties of materials, the effects of tritium on biological systems, and data on physical and chemical properties of tritium. Substantial progress needs to be made on these problems early enough to permit possible solutions to be tested on EPR-I. In addition, major improvements in tritium handling equipment are required for EPR-I. Those technological problems for which solutions have not yet been demonstrated by EPR-II must be solved by 1989 if they are to be assured successful application in the demonstration reactor

  10. MEGASTAR: The Meaning of Energy Growth: An Assessment of Systems, Technologies, and Requirements

    Science.gov (United States)

    1974-01-01

    A methodology for the display and analysis of postulated energy futures for the United States is presented. A systems approach that includes the methodology of technology assessment is used to examine three energy scenarios--the Westinghouse Nuclear Electric Economy, the Ford Technical Fix Base Case and a MEGASTAR generated Alternate to the Ford Technical Fix Base Case. The three scenarios represent different paths of energy consumption for the present to the year 2000. Associated with these paths are various mixes of fuels, conversion, distribution, conservation and end-use technologies. MEGASTAR presents the estimated times and unit requirements to supply the fuels, conversion and distribution systems for the postulated end uses for the three scenarios and then estimates the aggregate manpower, materials, and capital requirements needed to develop the energy system described by the particular scenario. The total requirements and the energy subsystems for each scenario are assessed for their primary impacts in the areas of society, the environment, technology and the economy.

  11. Requirements and Technology Advances for Global Wind Measurement with a Coherent Lidar: A Shrinking Gap

    Science.gov (United States)

    Kavaya, Michael J.; Kavaya, Michael J.; Yu, Jirong; Koch, Grady J.; Amzajerdian, Farzin; Singh, Upendra N.; Emmitt, G. David

    2007-01-01

    Early concepts to globally measure vertical profiles of vector horizontal wind from space planned on an orbit height of 525 km, a single pulsed coherent Doppler lidar system to cover the full troposphere, and a continuously rotating telescope/scanner that mandated a vertical line of sight wind profile from each laser shot. Under these conditions system studies found that laser pulse energies of approximately 20 J at 10 Hz pulse repetition rate with a rotating telescope diameter of approximately 1.5 m was required. Further requirements to use solid state laser technology and an eyesafe wavelength led to the relatively new 2-micron solid state laser. With demonstrated pulse energies near 20 mJ at 5 Hz, and no demonstration of a rotating telescope maintaining diffraction limited performance in space, the technology gap between requirements and demonstration was formidable. Fortunately the involved scientists and engineers set out to reduce the gap, and through a combination of clever ideas and technology advances over the last 15 years, they have succeeded. This paper will detail the gap reducing factors and will present the current status.

  12. A Cognitive Systems Engineering Approach to Developing HMI Requirements for New Technologies

    Science.gov (United States)

    Fern, Lisa Carolynn

    2016-01-01

    This document examines the challenges inherent in designing and regulating to support human-automation interaction for new technologies that will deployed into complex systems. A key question for new technologies, is how work will be accomplished by the human and machine agents. This question has traditionally been framed as how functions should be allocated between humans and machines. Such framing misses the coordination and synchronization that is needed for the different human and machine roles in the system to accomplish their goals. Coordination and synchronization demands are driven by the underlying human-automation architecture of the new technology, which are typically not specified explicitly by the designers. The human machine interface (HMI) which is intended to facilitate human-machine interaction and cooperation, however, typically is defined explicitly and therefore serves as a proxy for human-automation cooperation requirements with respect to technical standards for technologies. Unfortunately, mismatches between the HMI and the coordination and synchronization demands of the underlying human-automation architecture, can lead to system breakdowns. A methodology is needed that both designers and regulators can utilize to evaluate the expected performance of a new technology given potential human-automation architectures. Three experiments were conducted to inform the minimum HMI requirements a detect and avoid system for unmanned aircraft systems (UAS). The results of the experiments provided empirical input to specific minimum operational performance standards that UAS manufacturers will have to meet in order to operate UAS in the National Airspace System (NAS). These studies represent a success story for how to objectively and systematically evaluate prototype technologies as part of the process for developing regulatory requirements. They also provide an opportunity to reflect on the lessons learned from a recent research effort in order to

  13. Transition from Realistic to Real World Problems with the Use of Technology in Elementary Mathematical Education

    Science.gov (United States)

    Budinski, Natalija; Milinkovic, Dragica

    2017-01-01

    The availability of technology has a big impact on education, and that is the main reason for discussing the use of technologies in mathematical education in our paper. The availability of technology influences how mathematical contents could be presented to students. We present the benefits of learning mathematical concepts through real life…

  14. Transitioning towards the Digital Native: Examining Digital Technologies, Video Games, and Learning

    Science.gov (United States)

    Salomon, John

    2010-01-01

    Although digital technologies have become commonplace among people who grew up around them, little is known about the effect that such technology will have on learners or its impact on traditional methods of educational delivery. This dissertation examines how certain technologies affect digital natives and seeks to understand specific…

  15. Transition strategies for managing technological discontinuities: lessons from the history of the semiconductor industry

    NARCIS (Netherlands)

    Stoelhorst, J.W.

    2002-01-01

    This paper explores the nature of competition under conditions of technological change and asks how firms can manage technological discontinuities. By drawing on the literatures on strategic management and technology dynamics, it is proposed that firms should change the nature of their strategy as a

  16. Framework for the quality assurance of 'omics technologies considering GLP requirements.

    Science.gov (United States)

    Kauffmann, Hans-Martin; Kamp, Hennicke; Fuchs, Regine; Chorley, Brian N; Deferme, Lize; Ebbels, Timothy; Hackermüller, Jörg; Perdichizzi, Stefania; Poole, Alan; Sauer, Ursula G; Tollefsen, Knut E; Tralau, Tewes; Yauk, Carole; van Ravenzwaay, Ben

    2017-12-01

    'Omics technologies are gaining importance to support regulatory toxicity studies. Prerequisites for performing 'omics studies considering GLP principles were discussed at the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) Workshop Applying 'omics technologies in Chemical Risk Assessment. A GLP environment comprises a standard operating procedure system, proper pre-planning and documentation, and inspections of independent quality assurance staff. To prevent uncontrolled data changes, the raw data obtained in the respective 'omics data recording systems have to be specifically defined. Further requirements include transparent and reproducible data processing steps, and safe data storage and archiving procedures. The software for data recording and processing should be validated, and data changes should be traceable or disabled. GLP-compliant quality assurance of 'omics technologies appears feasible for many GLP requirements. However, challenges include (i) defining, storing, and archiving the raw data; (ii) transparent descriptions of data processing steps; (iii) software validation; and (iv) ensuring complete reproducibility of final results with respect to raw data. Nevertheless, 'omics studies can be supported by quality measures (e.g., GLP principles) to ensure quality control, reproducibility and traceability of experiments. This enables regulators to use 'omics data in a fit-for-purpose context, which enhances their applicability for risk assessment. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Commercially-driven human interplanetary propulsion systems: Rationale, concept, technology, and performance requirements

    International Nuclear Information System (INIS)

    Williams, C.H.; Borowski, S.K.

    1996-01-01

    Previous studies of human interplanetary missions are largely characterized by long trip times, limited performance capabilities, and enormous costs. Until these missions become dramatically more open-quote open-quote commercial-friendly close-quote close-quote, their funding source and rationale will be restricted to national governments and their political/scientific interests respectively. A rationale is discussed for human interplanetary space exploration predicated on the private sector. Space propulsion system requirements are identified for interplanetary transfer times of no more than a few weeks/months to and between the major outer planets. Nuclear fusion is identified as the minimum requisite space propulsion technology. A conceptual design is described and evolutionary catalyzed-DD to DHe 3 fuel cycles are proposed. Magnetic nozzles for direct thrust generation and quantifying the operational aspects of the energy exchange mechanisms between high energy reaction products and neutral propellants are identified as two of the many key supporting technologies essential to satisfying system performance requirements. Government support of focused, breakthrough technologies is recommended at funding levels appropriate to other ongoing federal research. copyright 1996 American Institute of Physics

  18. Whole-transcriptome analysis of endothelial to hematopoietic stem cell transition reveals a requirement for Gpr56 in HSC generation.

    Science.gov (United States)

    Solaimani Kartalaei, Parham; Yamada-Inagawa, Tomoko; Vink, Chris S; de Pater, Emma; van der Linden, Reinier; Marks-Bluth, Jonathon; van der Sloot, Anthon; van den Hout, Mirjam; Yokomizo, Tomomasa; van Schaick-Solernó, M Lucila; Delwel, Ruud; Pimanda, John E; van IJcken, Wilfred F J; Dzierzak, Elaine

    2015-01-12

    Hematopoietic stem cells (HSCs) are generated via a natural transdifferentiation process known as endothelial to hematopoietic cell transition (EHT). Because of small numbers of embryonal arterial cells undergoing EHT and the paucity of markers to enrich for hemogenic endothelial cells (ECs [HECs]), the genetic program driving HSC emergence is largely unknown. Here, we use a highly sensitive RNAseq method to examine the whole transcriptome of small numbers of enriched aortic HSCs, HECs, and ECs. Gpr56, a G-coupled protein receptor, is one of the most highly up-regulated of the 530 differentially expressed genes. Also, highly up-regulated are hematopoietic transcription factors, including the "heptad" complex of factors. We show that Gpr56 (mouse and human) is a target of the heptad complex and is required for hematopoietic cluster formation during EHT. Our results identify the processes and regulators involved in EHT and reveal the surprising requirement for Gpr56 in generating the first HSCs. © 2015 Solaimani Kartalaei et al.

  19. Required Technologies for A 10-16 m UV-Visible-IR Telescope on the Moon

    Science.gov (United States)

    Johnson, Stewart W.; Wetzel, John P.

    1989-01-01

    A successor to the Hubble Space Telescope, incorporating a 10 to 16 meter mirror, and operating in the UV-Visible-IR is being considered for emplacement on the Moon in the 21st Century. To take advantage of the characteristics of the lunar environment, such a telescope requires appropriate advances in technology. These technologies are in the areas of contamination/interference control, test and evaluation, manufacturing, construction, autonomous operations and maintenance, power and heating/cooling, stable precision structures, optics, parabolic antennas, and communications/control. This telescope for the lunar surface needs to be engineered to operate for long periods with minimal intervention by humans or robots. What is essential for lunar observatory operation is enforcement of a systems engineering approach that makes compatible all lunar operations associated with habitation, resource development, and science.

  20. An assistive technology for hearing-impaired persons: analysis, requirements and architecture.

    Science.gov (United States)

    Mielke, Matthias; Grunewald, Armin; Bruck, Rainer

    2013-01-01

    In this contribution, a concept of an assistive technology for hearing-impaired and deaf persons is presented. The concept applies pattern recognition algorithms and makes use of modern communication technology to analyze the acoustic environment around a user, identify critical acoustic signatures and give an alert to the user when an event of interest happened. A detailed analysis of the needs of deaf and hearing-impaired people has been performed. Requirements for an adequate assisting device have been derived from the results of the analysis, and have been turned into an architecture for its implementation that will be presented in this article. The presented concept is the basis for an assistive system which is now under development at the Institute of Microsystem Engineering at the University of Siegen.

  1. LANGUAGE LEARNING UNDER CLASSROOM CONDITIONS DURING THE TRANSITION TO HYBRID INSTRUCTION: A CASE-STUDY OF STUDENT PERFORMANCE DURING THE IMPLEMENTATION OF INSTRUCTIONAL TECHNOLOGY

    OpenAIRE

    Lisbeth O. Swain; Timothy D. Swain

    2017-01-01

    We examined the unmanipulated performance of students under real classroom conditions in order to assess the effect of a technology-enhanced hybrid learning approach to second language, (L2) instruction on beginning and advanced Spanish language learners. This research focused on the transition period of technology implementation when the entire section of Spanish of a modern language department of a liberal arts university transitioned from traditional face-to-face instruction, to a technolo...

  2. The role of electricity storage and hydrogen technologies in enabling global low-carbon energy transitions

    OpenAIRE

    McPherson, M.; Johnson, N.; Strubegger, M.

    2018-01-01

    Previous studies have noted the importance of electricity storage and hydrogen technologies for enabling large-scale variable renewable energy (VRE) deployment in long-term climate change mitigation scenarios. However, global studies, which typically use integrated assessment models, assume a fixed cost trajectory for storage and hydrogen technologies; thereby ignoring the sensitivity of VRE deployment and/or mitigation costs to uncertainties in future storage and hydrogen technology costs. Y...

  3. Important requirements for RF generators for Accelerator-Driven Transmutation Technologies (ADTT)

    International Nuclear Information System (INIS)

    Lynch, M.T.; Tallerico, P.J.; Lawrence, G.P.

    1994-01-01

    All Accelerator-Driven Transmutation applications require very large amounts of RF Power. For example, one version of a Plutonium burning system requires an 800-MeV, 80-mA, proton accelerator running at 100% duty factor. This accelerator requires approximately 110-MW of continuous RF power if one assumes only 10% reserve power for control of the accelerator fields. In fact, to minimize beam spill, the RF controls may need as much as 15 to 20% of reserve power. In addition, unlike an electron accelerator in which the beam is relativistic, a failed RF station can disturb the synchronism of the beam, possibly shutting down the entire accelerator. These issues and more lead to a set of requirements for the RF generators which are stringent, and in some cases, conflicting. In this paper, we will describe the issues and requirements, and outline a plan for RF generator development to meet the needs of the Accelerator-Driven Transmutation Technologies. The key issues which will be discussed include: operating efficiency, operating linearity, effect on the input power grid, bandwidth, gain, reliability, operating voltage, and operating current

  4. Building mobile technologies to improve transitions of care in adolescents with congenital heart disease

    Science.gov (United States)

    Congenital heart diseases (CHDs) are the most common type of birth defects. Improvements in CHD care have led to roughly 1.4 million survivors reaching adulthood. This emerging "survivor" population are often palliated but not cured. Thus successful transition from pediatric to adult care for CHD pa...

  5. The Optimal Technological Development Path to Reduce Pollution and Restructure Iron and Steel Industry for Sustainable Transition

    OpenAIRE

    Ren, M.; Xu, X.; Ermolieva, T.; Cao, G.-Y.; Yermoliev, Y.

    2018-01-01

    China is the world’s largest iron and steel producer and Jing-Jin-Ji (Beijing-Tianjin-Hebei) region accounts for nearly 1/3 of the national iron and steel production, while it is facing serious air pollution. Among the top 10 worst polluted cities in China, seven were located in Hebei province in 2014. Recent years Jing-Jin-Ji region has been promoted iron & steel industry with green clean technology for accelerating sustainable economic transition. This paper tries to response the basic ques...

  6. Technology requirements for fusion--fission reactors based on magnetic-mirror confinement

    International Nuclear Information System (INIS)

    Moir, R.W.

    1978-01-01

    Technology requirements for mirror hybrid reactors are discussed. The required 120-keV neutral beams can use positive ions. The magnetic fields are 8 T or under and can use NbTi superconductors. The value of Q (where Q is the ratio of fusion power to injection power) should be in the range of 1 to 2 for economic reasons relating to the cost of recirculating power. The wall loading of 14-MeV neutrons should be in the range of 1 to 2 MW/m 2 for economic reasons. Five-times higher wall loading will likely be needed if fusion reactors are to be economical. The magnetic mirror experiments 2XIIB, TMX, and MFTF are described

  7. Multi-Lab EV Smart Grid Integration Requirements Study. Providing Guidance on Technology Development and Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Markel, T. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Meintz, A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hardy, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Chen, B. [Argonne National Lab. (ANL), Argonne, IL (United States); Bohn, T. [Argonne National Lab. (ANL), Argonne, IL (United States); Smart, J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Scoffield, D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hovsapian, R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Saxena, S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); MacDonald, J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kiliccote, S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kahl, K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pratt, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-05-28

    The report begins with a discussion of the current state of the energy and transportation systems, followed by a summary of some VGI scenarios and opportunities. The current efforts to create foundational interface standards are detailed, and the requirements for enabling PEVs as a grid resource are presented. Existing technology demonstrations that include vehicle to grid functions are summarized. The report also includes a data-based discussion on the magnitude and variability of PEVs as a grid resource, followed by an overview of existing simulation tools that vi This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. can be used to explore the expansion of VGI to larger grid functions that might offer system and customer value. The document concludes with a summary of the requirements and potential action items that would support greater adoption of VGI.

  8. Federal technology transfer requirements :a focused study of principal agencies approaches with implications for the Department of Homeland Security.

    Energy Technology Data Exchange (ETDEWEB)

    Koker, Denise; Micheau, Jill M.

    2006-07-01

    This report provides relevant information and analysis to the Department of Homeland Security (DHS) that will assist DHS in determining how to meet the requirements of federal technology transfer legislation. These legal requirements are grouped into five categories: (1) establishing an Office of Research and Technology Applications, or providing the functions thereof; (2) information management; (3) enabling agreements with non-federal partners; (4) royalty sharing; and (5) invention ownership/obligations. These five categories provide the organizing framework for this study, which benchmarks other federal agencies/laboratories engaged in technology transfer/transition Four key agencies--the Department of Health & Human Services (HHS), the U.S. Department of Agriculture (USDA), the Department of Energy (DOE), and the Department of Defense (DoD)--and several of their laboratories have been surveyed. An analysis of DHS's mission needs for commercializing R&D compared to those agencies/laboratories is presented with implications and next steps for DHS's consideration. Federal technology transfer legislation, requirements, and practices have evolved over the decades as agencies and laboratories have grown more knowledgeable and sophisticated in their efforts to conduct technology transfer and as needs and opinions in the federal sector have changed with regards to what is appropriate. The need to address requirements in a fairly thorough manner has, therefore, resulted in a lengthy paper. There are two ways to find summary information. Each chapter concludes with a summary, and there is an overall ''Summary and Next Steps'' chapter on pages 57-60. For those readers who are unable to read the entire document, we recommend referring to these pages.

  9. Spallation-based science and technology and associated nuclear data requirements

    International Nuclear Information System (INIS)

    Bowman, C.D.; Lisowski, P.W.; Arthur, E.D.

    1990-01-01

    Rapid advances in accelerator technology in recent years promise average proton beam currents as high as 250 mA with energies greater than one GeV. Such an accelerator could produce very high intensities of neutrons and other nuclear particles thus opening up new areas of science and technology. An example is the efficient burning of transuranic and fission product waste. With such a spallation-burner it appears that high-level waste might be converted to low-level waste on a time scale comparable to the human lifespan at a reasonable additional cost for electric power generation. The emphasis of this paper is on the design of a high power proton target for neutron production, on the nuclear data needed to operate this target safely and effectively, and on data requirements for transmutation. It is suggested that a pilot facility consisting of a 1.6 GeV accelerator and target operating at 25 ma is the next major step in developing this technology. Bursts of protons near the terawatt level might also be generated using such an accelerator with a proton accumulator ring. Research prospects based on such proton bursts are briefly described. The status of established nuclear data needs and of accelerator-based sources for nuclear data measurements is reviewed. 6 refs., 8 figs., 2 tabs

  10. Spallation-based science and technology and associated nuclear data requirements

    International Nuclear Information System (INIS)

    Bowman, C.D.; Lisowski, P.W.; Arthur, E.D.

    1990-01-01

    Rapid advances in accelerator technology in recent years promise average proton beam currents as high as 250 mA with energies greater than one GeV. Such an accelerator could produce very high intensities of neutrons and other nuclear particles thus opening up new areas of science and technology. An example is the efficient burning of transuranic and fission product waste. With such a spallation-burner it appears that high-level waste might be converted to low-level waste on a time scale comparable to the human lifespan at a reasonable additional cost for electric power generation. The emphasis of this paper is on the design of a high power proton target for neutron production, on the nuclear data needed to operate this target safely and effectively, and on data requirements for transmutation. It is suggested that a pilot facility consisting of a 1.6 GeV accelerator and target operating at 25 ma is the next major step in developing this technology. Bursts of protons near the terawatt level might also be generated using such an accelerator with a proton accumulator ring. Research prospects based on such proton bursts are briefly described. The status of established nuclear data needs and of accelerator-based sources for nuclear data measurements is reviewed. (author)

  11. Field demonstration and transition of SCAPS direct push VOC in-situ sensing technologies

    International Nuclear Information System (INIS)

    Davis, William M.

    1999-01-01

    This project demonstrated two in-situ volatile organic compound (VOC) samplers in combination with the direct sampling ion trap mass spectrometer (DSITMS). The technologies chosen were the Vadose Sparge and the Membrane Interface Probe (MIP) sensing systems. Tests at two demonstration sites showed the newer VOC technologies capable of providing in situ contaminant measurements at two to four times the rate of the previously demonstrated Hydrosparge sensor. The results of this project provide initial results supporting the utility of these new technologies to provide rapid site characterization of VOC contaminants in the subsurface

  12. Key Technologies in the Context of Future Networks: Operational and Management Requirements

    Directory of Open Access Journals (Sweden)

    Lorena Isabel Barona López

    2016-12-01

    Full Text Available The concept of Future Networks is based on the premise that current infrastructures require enhanced control, service customization, self-organization and self-management capabilities to meet the new needs in a connected society, especially of mobile users. In order to provide a high-performance mobile system, three main fields must be improved: radio, network, and operation and management. In particular, operation and management capabilities are intended to enable business agility and operational sustainability, where the addition of new services does not imply an excessive increase in capital or operational expenditures. In this context, a set of key-enabled technologies have emerged in order to aid in this field. Concepts such as Software Defined Network (SDN, Network Function Virtualization (NFV and Self-Organized Networks (SON are pushing traditional systems towards the next 5G network generation.This paper presents an overview of the current status of these promising technologies and ongoing works to fulfill the operational and management requirements of mobile infrastructures. This work also details the use cases and the challenges, taking into account not only SDN, NFV, cloud computing and SON but also other paradigms.

  13. Future mission opportunities and requirements for advanced space photovoltaic energy conversion technology

    Science.gov (United States)

    Flood, Dennis J.

    1990-01-01

    The variety of potential future missions under consideration by NASA will impose a broad range of requirements on space solar arrays, and mandates the development of new solar cells which can offer a wide range of capabilities to mission planners. Major advances in performance have recently been achieved at several laboratories in a variety of solar cell types. Many of those recent advances are reviewed, the areas are examined where possible improvements are yet to be made, and the requirements are discussed that must be met by advanced solar cell if they are to be used in space. The solar cells of interest include single and multiple junction cells which are fabricated from single crystal, polycrystalline and amorphous materials. Single crystal cells on foreign substrates, thin film single crystal cells on superstrates, and multiple junction cells which are either mechanically stacked, monolithically grown, or hybrid structures incorporating both techniques are discussed. Advanced concentrator array technology for space applications is described, and the status of thin film, flexible solar array blanket technology is reported.

  14. Soft-robotic arm inspired by the octopus: II. From artificial requirements to innovative technological solutions

    International Nuclear Information System (INIS)

    Mazzolai, B; Margheri, L; Cianchetti, M; Dario, P; Laschi, C

    2012-01-01

    Soft robotics is a current focus in robotics research because of the expected capability of soft robots to better interact with real-world environments. As a point of inspiration in the development of innovative technologies in soft robotics, octopuses are particularly interesting ‘animal models’. Octopus arms have unique biomechanical capabilities that combine significant pliability with the ability to exert a great deal of force, because they lack rigid structures but can change and control their degree of stiffness. The octopus arm motor capability is a result of the peculiar arrangement of its muscles and the properties of its tissues. These special abilities have been investigated by the authors in a specific study dedicated to identifying the key principles underlying these biological functions and deriving engineering requirements for robotics solutions. This paper, which is the second in a two-part series, presents how the identified requirements can be used to create innovative technological solutions, such as soft materials, mechanisms and actuators. Experiments indicate the ability of these proposed solutions to ensure the same performance as in the biological model in terms of compliance, elongation and force. These results represent useful and relevant components of innovative soft-robotic systems and suggest their potential use to create a new generation of highly dexterous, soft-bodied robots. (paper)

  15. Leveraging CubeSat Technology to Address Nighttime Imagery Requirements over the Arctic

    Science.gov (United States)

    Pereira, J. J.; Mamula, D.; Caulfield, M.; Gallagher, F. W., III; Spencer, D.; Petrescu, E. M.; Ostroy, J.; Pack, D. W.; LaRosa, A.

    2017-12-01

    The National Oceanic and Atmospheric Administration (NOAA) has begun planning for the future operational environmental satellite system by conducting the NOAA Satellite Observing System Architecture (NSOSA) study. In support of the NSOSA study, NOAA is exploring how CubeSat technology funded by NASA can be used to demonstrate the ability to measure three-dimensional profiles of global temperature and water vapor. These measurements are critical for the National Weather Service's (NWS) weather prediction mission. NOAA is conducting design studies on Earth Observing Nanosatellites (EON) for microwave (EON-MW) and infrared (EON-IR) soundings, with MIT Lincoln Laboratory and NASA JPL, respectively. The next step is to explore the technology required for a CubeSat mission to address NWS nighttime imagery requirements over the Arctic. The concept is called EON-Day/Night Band (DNB). The DNB is a 0.5-0.9 micron channel currently on the operational Visible Infrared Imaging Radiometer Suite (VIIRS) instrument, which is part of the Suomi-National Polar-orbiting Partnership and Joint Polar Satellite System satellites. NWS has found DNB very useful during the long periods of darkness that occur during the Alaskan cold season. The DNB enables nighttime imagery products of fog, clouds, and sea ice. EON-DNB will leverage experiments carried out by The Aerospace Corporation's CUbesat MULtispectral Observation System (CUMULOS) sensor and other related work. CUMULOS is a DoD-funded demonstration of COTS camera technology integrated as a secondary mission on the JPL Integrated Solar Array and Reflectarray Antenna mission. CUMULOS is demonstrating a staring visible Si CMOS camera. The EON-DNB project will leverage proven, advanced compact visible lens and focal plane camera technologies to meet NWS user needs for nighttime visible imagery. Expanding this technology to an operational demonstration carries several areas of risk that need to be addressed prior to an operational mission

  16. Change in cell shape is required for matrix metalloproteinase-induced epithelial-mesenchymal transition of mammary epithelial cells

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Celeste M.; Khauv, Davitte; Bissell, Mina J.; Radisky, Derek C.

    2008-06-26

    Cell morphology dictates response to a wide variety of stimuli, controlling cell metabolism, differentiation, proliferation, and death. Epithelial-mesenchymal transition (EMT) is a developmental process in which epithelial cells acquire migratory characteristics, and in the process convert from a 'cuboidal' epithelial structure into an elongated mesenchymal shape. We had shown previously that matrix metalloproteinase-3 (MMP3) can stimulate EMT of cultured mouse mammary epithelial cells through a process that involves increased expression of Rac1b, a protein that stimulates alterations in cytoskeletal structure. We show here that cells treated with MMP-3 or induced to express Rac1b spread to cover a larger surface, and that this induction of cell spreading is a requirement of MMP-3/Rac1b-induced EMT. We find that limiting cell spreading, either by increasing cell density or by culturing cells on precisely defined micropatterned substrata, blocks expression of characteristic markers of EMT in cells treated with MMP-3. These effects are not caused by general disruptions in cell signaling pathways, as TGF-{beta}-induced EMT is not affected by similar limitations on cell spreading. Our data reveal a previously unanticipated cell shape-dependent mechanism that controls this key phenotypic alteration and provide insight into the distinct mechanisms activated by different EMT-inducing agents.

  17. It’s the workflows, stupid! What is required to make ‘offsetting’ work for the open access transition

    Directory of Open Access Journals (Sweden)

    Kai Geschuhn

    2017-11-01

    Full Text Available This paper makes the case for stronger engagement of libraries and consortia when it comes to negotiating and drafting offsetting agreements. Two workshops organized by the Efficiencies and Standards for Article Charges (ESAC initiative in 2016 and 2017 have shown a clear need for an improvement of the current workflows and processes between academic institutions (and libraries and the publishers they use in terms of author identification, metadata exchange and invoicing. Publishers need to invest in their editorial systems, while institutions need to get a clearer understanding of the strategic goal of offsetting. To this purpose, strategic and practical elements, which should be included in the agreements, will be introduced. Firstly, the 'Joint Understanding of Offsetting', launched in 2016, will be discussed. This introduces the ‘pay-as-you-publish’ model as a transitional pathway for the agreements. Secondly, this paper proposes a set of recommendations for article workflows and services between institutions and publishers, based on a draft document which was produced as part of the 2nd ESAC Offsetting Workshop in March 2017. These recommendations should be seen as a minimum set of practical and formal requirements for offsetting agreements and are necessary to make any publication-based open access business model work.

  18. Phosphorylation in the C-terminal domain of Aquaporin-4 is required for Golgi transition in primary cultured astrocytes

    International Nuclear Information System (INIS)

    Kadohira, Ikuko; Abe, Yoichiro; Nuriya, Mutsuo; Sano, Kazumi; Tsuji, Shoji; Arimitsu, Takeshi; Yoshimura, Yasunori; Yasui, Masato

    2008-01-01

    Aquaporin-4 (AQP4) is expressed in the perivascular and subpial astrocytes end-feet in mammalian brain, and plays a critical component of an integrated water and potassium homeostasis. Here we examine whether AQP4 is phosphorylated in primary cultured mouse astrocytes. Astrocytes were metabolically labeled with [ 32 P]phosphoric acid, then AQP4 was immunoprecipitated with anti-AQP4 antibody. We observed that AQP4 was constitutively phosphorylated, which is reduced by treatment with protein kinase CK2 inhibitors. To elucidate the phosphorylation of AQP4 by CK2, myc-tagged wild-type or mutant AQP4 was transiently transfected in primary cultured astrocytes. Substitution of Ala residues for four putative CK2 phosphorylation sites in the C terminus abolished the phosphorylation of AQP4. Immunofluorescent microscopy revealed that the quadruple mutant was localized in the Golgi apparatus. These observations indicate that the C-terminal domain of AQP4 is constitutively phosphorylated at least in part by protein kinase CK2 and it is required for Golgi transition.

  19. Report to Congress on the Activities of the DoD Office of Technology Transition

    National Research Council Canada - National Science Library

    2006-01-01

    .... This 11th report discusses our major efforts and successes in transferring technology. Appendix B displays specific data elements showing the trends in Cooperative Research and Development Agreements (CRADAs...

  20. Pressure transmitters: Addressing post-Fukushima regulations and requirements with Bibloc technology by Rolls-Royce

    International Nuclear Information System (INIS)

    Fabbro, Herve; Desgeorge, Romain; Chowanek, Michel

    2013-06-01

    Nuclear power stations are designed to withstand substantial seismic activity and as such represent some of the most robust buildings in the world. However The Fukushima nuclear incident highlighted the potential vulnerability of nuclear power plants when multiple natural events of historic proportions happen simultaneously. Following the incident, the worldwide nuclear industry quite rightly called for an immediate review and a targeted reassessment of the safety margins of nuclear reactors. Several recommendations have been given by international safety authorities, including a significant toughening of the already stringent regulations and requirements, with respect to earthquakes, extreme temperatures, pressure and radiation resistance. In the event of an accident, a quick response is imperative and to act efficiently, a correct knowledge of the situation as well as an accurate estimation of its severity are required. Thus, it is essential to be able to rely on the most reliable sensors possible, in particular for the 50 to 100 classified pressure transmitters. Equipment used in nuclear plants all over the world, such pressure transmitters, are implemented following one of two different types of design: - The Monobloc design where almost all the equipment or system is installed very close to the reactor, within the reactor building. - The Bibloc design where the most sensitive parts (in particular the electronics) are removed from the harsh environment present in the vicinity of the reactor to be placed outside of the reactor building. The paper will present the advantages of the Bibloc technology and will show how this technology meets the 'Post Fukushima' requirements. (authors)

  1. Hearing the way: requirements and preferences for technology-supported navigation aids.

    Science.gov (United States)

    Lewis, Laura; Sharples, Sarah; Chandler, Ed; Worsfold, John

    2015-05-01

    Many systems have been developed to assist wayfinding for people with sight problems. There is a need for user requirements for such systems to be defined. This paper presents a study which aimed to determine such user requirements. An experiment was also conducted to establish the best way of guiding users between locations. The focus group results indicated that users require systems to provide them with information about their surroundings, to guide them along their route and to provide progress information. They also showed that users with sight conditions interact with systems differently to sighted users, thereby highlighting the importance of designing systems for the needs of these users. Results of the experiment found that the preferred method of guiding users was a notification when they were both on and off track. However, performance was best when only provided with the off track notification, implying that this cue is particularly important. Technology has the potential to support navigation for people with sight problems. Users should have control over cues provided and for these cues should supplement environmental cues rather than replacing them. Copyright © 2015. Published by Elsevier Ltd.

  2. Studies of dose optimization and image quality in technological transition in mammography; Estudos de otimizacao de dose e qualidade de imagem em processos de transicao tecnologica em mamografia

    Energy Technology Data Exchange (ETDEWEB)

    Furquim, Tania C.; Nersissian, Denise Y., E-mail: tfurquim@iee.usp.b [Universidade de Sao Paulo (IEE/USP), SP (Brazil). Inst. de Eletrotecnica e Energia

    2011-07-01

    The introduction of new technologies in mammography may improve image quality; however, it may unnecessarily increase doses if optimization processes are not studied. In this work, radiation doses of the moment of transition of conventional to digital mammography have been analyzed. The presented data have been acquired from 2005 to 2009, in hospitals and clinics of Sao Paulo city, to 4 conventional and 5 digital equipment. The results show that even after optimization processes, new technologies still impart higher doses. Thus, individualized studies are needed when technological transitions occur, in order to maintain image quality without significant dose increase. (author)

  3. Timing Is everything: quantifying regulatory and market readiness levels for technology transition policy analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kobos, Peter Holmes [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Malczynski, Leonard A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Walker, La Tonya Nicole [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Borns, David James [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2014-03-01

    People save for retirement throughout their career because it is virtually impossible to save all you’ll need in retirement the year before you retire. Similarly, without installing incremental amounts of clean fossil, renewable or transformative energy technologies throughout the coming decades, a radical and immediate change will be near impossible the year before a policy goal is set to be in place. This notion of steady installation growth over acute installations of technology to meet policy goals is the core topic of discussion for this research. This research operationalizes this notion by developing the theoretical underpinnings of regulatory and market acceptance delays by building upon the common Technology Readiness Level (TRL) framework and offers two new additions to the research community. The new and novel Regulatory Readiness Level (RRL) and Market Readiness Level (MRL) frameworks were developed. These components, collectively called the Technology, Regulatory and Market (TRM) readiness level framework allow one to build new constraints into existing Integrated Assessment Models (IAMs) to address research questions such as, ‘To meet our desired technical and policy goals, what are the factors that affect the rate we must install technology to achieve these goals in the coming decades?’

  4. Patient care information systems and physicians: the transition from technology icon to health care instrument.

    Science.gov (United States)

    Bria, W F

    1993-11-01

    We have discussed several important transitions now occurring in PCIS that promise to improve the utility and availability of these systems for the average physician. Charles Babbage developed the first computers as "thinking machines" so that we may extend our ability to grapple with more and more complex problems. If current trends continue, we will finally witness the evolution of patient care computing from information icons of the few to clinical instruments improving the quality of medical decision making and care for all patients.

  5. Career transitions for persons with severe physical disabilities: integrating technological and psychosocial skills and accommodations.

    Science.gov (United States)

    Lash, M; Licenziato, V

    1995-01-01

    This article describes a vocational training program entitled, 'Careers in Automation for Persons with Severe Physical Disabilities', that was developed by the Department of Physical Medicine and Rehabilitation at Tufts University School of Medicine in collaboration with the Massachusetts Rehabilitation Commission. Its goal is to secure employment for individuals with severe physical impairments by using computers and technology as job related accommodations. Psychosocial, educational, and vocational profiles are presented for 24 clients over 4 years. Three case studies involving persons with traumatic, chronic and developmental disabilities illustrate the importance of matching technological accommodations with employer needs and personal preferences. Discussion of employment outcomes illustrates that the effective use of computers and technology by persons with disabilities is best measured not by the degree of sophistication and engineering of systems and devices, but by employer and employee satisfaction with job performance and productivity.

  6. Surface technology is essential for transition to a hydrogen-based energy system

    DEFF Research Database (Denmark)

    Nielsen, L. P.; Leisner, P.; Møller, P.

    2018-01-01

    The importance of advanced surface technology for the success of the ongoing energy turnaround in Germany has recently been discussed in this journal. The purpose of the present article is to add views based on the conditions valid for the Nordic region.......The importance of advanced surface technology for the success of the ongoing energy turnaround in Germany has recently been discussed in this journal. The purpose of the present article is to add views based on the conditions valid for the Nordic region....

  7. Epithelial mesenchymal transition is required for acquisition of anoikis resistance and metastatic potential in adenoid cystic carcinoma.

    Directory of Open Access Journals (Sweden)

    Jun Jia

    Full Text Available Human adenoid cystic carcinoma (ACC is characterized by diffused invasion of the tumor into adjacent organs and early distant metastasis. Anoikis resistance and epithelial mesenchymal transition (EMT are considered prerequisites for cancer cells to metastasize. Exploring the relationship between these processes and their underlying mechanism of action is a promising way to better understand ACC tumors. We initially established anoikis-resistant sublines of ACC cells; the variant cells revealed a mesenchymal phenotype through Slug-mediated EMT-like transformation and displayed enhanced metastatic potential both in vitro and in vivo. Suppression of EMT by knockdown of Slug significantly impaired anoikis resistance, migration, and invasion of the variant cells. With overexpression of Slug and Twist, we determined that induction of EMT in normal ACC cells could prevent anoikis, albeit partially. These findings strongly suggest that EMT is indispensable in anoikis resistance, at least in ACC cells. Furthermore, we found that the EGFR/PI3K/Akt pathway acts as the common regulator for EMT-like transformation and anoikis resistance, as confirmed by their specific inhibitors. Gefitinib and LY294003 restored the sensibilities of anoikis-resistant cells to anoikis and simultaneously impaired their metastatic potential. In addition, the results from our in vivo model of metastasis suggest that pretreatment with gefitinib promotes mouse survival by alleviating pulmonary metastasis. Most importantly, immunohistochemistry of human ACC specimens showed a correlation between the overexpression of Slug and EGFR staining. This study has demonstrated that Slug-mediated EMT-like transformation is required by human ACC cells to achieve anoikis resistance and their metastatic potential. Targeting the EGFR/PI3K/Akt pathway holds potential as a preventive strategy against distant metastasis of ACC.

  8. Accuracy required and achievable in radiotherapy dosimetry: have modern technology and techniques changed our views?

    Science.gov (United States)

    Thwaites, David

    2013-06-01

    In this review of the accuracy required and achievable in radiotherapy dosimetry, older approaches and evidence-based estimates for 3DCRT have been reprised, summarising and drawing together the author's earlier evaluations where still relevant. Available evidence for IMRT uncertainties has been reviewed, selecting information from tolerances, QA, verification measurements, in vivo dosimetry and dose delivery audits, to consider whether achievable uncertainties increase or decrease for current advanced treatments and practice. Overall there is some evidence that they tend to increase, but that similar levels should be achievable. Thus it is concluded that those earlier estimates of achievable dosimetric accuracy are still applicable, despite the changes and advances in technology and techniques. The one exception is where there is significant lung involvement, where it is likely that uncertainties have now improved due to widespread use of more accurate heterogeneity models. Geometric uncertainties have improved with the wide availability of IGRT.

  9. The transition from strategic technology alliances to mergers and acquisitions: an exploratory study

    NARCIS (Netherlands)

    Hagedoorn, J.; Sadowski, B.M.

    1999-01-01

    This paper studies a number of research topics derived from the basic question: do interfirm alliances change into mergers and acquisitions as companies that were previously co-operating become integrated? The analysis is limited to the group of strategic technology alliances, i.e. those interfirm

  10. The AMT maglev test sled -- EML weapons technology transition to transportation

    Energy Technology Data Exchange (ETDEWEB)

    Schaaf, J.C. Jr. [BDM Federal, Huntsville, AL (United States); Zowarka, R.C. Jr. [Univ. of Texas, Austin, TX (United States); Davey, K. [American Maglev Technology, Inc., Edgewater, FL (United States); Weldon, J.M. [Parker Kinetic Designs, Inc., Austin, TX (United States)

    1997-01-01

    Technology spinoffs from prior electromagnetic launcher work enhance a magnetic levitation transportation system test bed being developed by American Maglev Technology of Florida. This project uses a series wound linear DC motor and brushes to simplify the magnetic levitation propulsion system. It takes advantage of previous related work in electromagnetic launcher technology to achieve success with this innovative design. Technology and knowledge gained from developments for homopolar generators and proposed railgun arc control are key to successful performance. This contribution supports a cost effective design that is competitive with alternative concepts. Brushes transfer power from the guideway (rail) to the vehicle (armature) in a novel design that activates the guideway only under the vehicle, reducing power losses and guideway construction costs. The vehicle carries no power for propulsion and levitation, and acts only as a conduit for the power through the high speed brushes. Brush selection and performance is based on previous EML homopolar generator research. A counterpulse circuit, first introduced in an early EML conference, is used to suppress arcing on the trailing brush and to transfer inductive energy to the next propulsion coil. Isolated static lift and preliminary propulsion tests have been completed, and integrated propulsion and lift tests are scheduled in early 1996.

  11. Student Teachers' Discourse about Digital Technologies and Transitions between Formal and Informal Learning Contexts

    Science.gov (United States)

    Pöntinen, Susanna; Dillon, Patrick; Väisänen, Pertti

    2017-01-01

    This research is a contribution to issues of digital technology use at the interface of formal and informal learning contexts. The research was conducted in the discourse tradition and investigates Finnish teacher training students' 'manners of speaking' as resources for, and obstacles to, making pedagogical changes in response to the potential of…

  12. Electronic Communications Technologies and the Transition to College: Links to Parent-Child Attachment and Adjustment

    Science.gov (United States)

    Sarigiani, Pamela A.; Trumbell, Jill M.; Camarena, Phame M.

    2013-01-01

    Electronic communications technologies (ECTs) help college students and parents remain in contact. Because recent reports have emphasized a link between ECTs, helicopter parenting, and autonomy issues, this study focused on the significance of contact patterns for attachment and student adjustment. First-semester college students (199 female, 81…

  13. Ionizing radiations in aseptic bottling: a comparison between technologies and safety requirements [beverages

    International Nuclear Information System (INIS)

    Bottani, E.; Rizzo, R.; Vignali, G.

    2006-01-01

    Ionizing radiations, commonly adopted in the medical field, are recently experiencing a wide diffusion in industrials applications. One of the most widespread uses of ionizing radiations refers to foodstuffs and packaging sterilization. In the aseptic bottling area, the application of this technology on polymeric caps is quickly developing. In such application, sterilization could be obtained with beta-rays, generated by an electron beam, or with gamma-rays, emitted by a radioactive source. After a brief explanation of physical properties of ionizing radiations, the aim of this paper is to discuss the use of radiations in aseptic bottling. Based on results available in literature, radiations effects on treated materials are discussed, as well as safety requirements aiming at reducing risks related to radiation exposure. Finally, sterilization plants with gamma and beta radiation are compared, with the aim of examining functioning principles and management complexity. As a result of the comparison between the two technologies, the electron beam (beta-rays) adoption for caps sterilization process proves to be preferable [it

  14. Development of test practice requirements for a standard method on fracture toughness testing in the transition range

    International Nuclear Information System (INIS)

    McCabe, D.E.; Zerbst, U.; Heerens, J.

    1993-01-01

    This report covers the resolution of several issues that are relevant to the ductile to brittle transition range of structural steels. One of this issues was to compare a statistical-based weakest-link method to constraint data adjustment methods for modeling the specimen size effects on fracture toughness. Another was to explore the concept of a universal transition temperature curve shape (Master Curve). Data from a Materials Properties Council round robin activity were used to test the proposals empirically. The findings of this study are inclosed in an activity for the development of a draft standard test procedure ''Test Practice for Fracture Toughness in the Transition Range''. (orig.) [de

  15. Delivering power system transition in China

    International Nuclear Information System (INIS)

    Yuan Jiahai; Xu Yan; Hu Zhaoguang

    2012-01-01

    This paper studies the transition to low carbon power systems in China. The methodology is built on the newly developed multi-level perspective (MLP) transitions, as well as literature on innovation systems. Three lines of thought on the transition process are integrated to probe the possible transition pathways in China's power sector. Five transition pathways, namely reproduction, transformation, substitution, reconfiguration, de-alignment/re-alignment and reconfiguration, with their possible technology options are presented. The requirements for a smart grid in the socio-technical transition process are addressed within the MLP framework. The paper goes further to propose an interactive framework for low carbon transition management in China. Representative technology options are appraised by employing innovation theory to demonstrate the logic of policy design within the framework. The work presented in this paper will be useful in informing policy-makers and other stakeholders in China and it may prove to be a valuable reference for other countries in energy transition management. - Highlights: ► The transition to low carbon power systems is studied from a multi-level perspective. ► Transition pathways with possible technology options are presented. ► An interactive framework is proposed for managing this transition. ► Representative technology options are appraised within the framework to show the logic of policy design.

  16. Transition of wind power utilization technology in the 20th century; 20 seiki ni okeru furyoku riyo gijutsu no hensen

    Energy Technology Data Exchange (ETDEWEB)

    Ushiyama, I. [Ashikaga Inst. of Tech., Tochigi (Japan)

    2000-04-01

    Windmills are one of the oldest prime movers and have been used for more than 700 years in Europe. The transition from low speed windmills for grain grinding and water pumping to high speed wind turbines for electric power generation had occurred at the end of 19{sup th} century. This paper, at first, reviews the windmill technologies and the researchers before 20th century. Then describes the back ground of how the wind power generator has existed and how the four pioneers developed their wind power generator. The historical developments of windmills to wind turbines in this century are studied focusing mainly on Danish activities. Then, the effort of the development of large wind turbine such as Smith-Putnum's first MW machine in U.S.A. and other mammoth machine concept are introduced. The new concept machines such as Savonius and Darrieus wind turbines in 1920s to 1930s are also explained. Finally, the novel technologies of wind turbine covering larger machines, variable speed generators, special wing sections for wind turbines, theoretical analysis method of wind turbine performance, offshore wind turbines, and wind turbine control technologies are stated. (author)

  17. Information management and technology strategy in healthcare: local timescales and national requirements

    Directory of Open Access Journals (Sweden)

    Les Smith

    2000-01-01

    Full Text Available The UK National Health Service’s strategic switch-back is well documented and each centrally originated change results in various attempts to record the repercussions and predict the outcomes. The most recent shift is embodied in the Department of Health’s information strategy, Information for health published in September 1998. This document provides the context for an examination of the issue of developing an Information Management and Technology (IM&T strategy at the local level within the changing national requirements for NHS information management. The particular pressures on an individual unit and the need to react to them alongside the requirements of the national strategy are the subjects of this article. The case detailed is that of Clatterbridge Centre for Oncology (CCO on Merseyside, the second largest centre of its type in the UK. Its initial investigation of information needs preceded the publication of the national strategy and its implementation straddled the timescale devised by the NHS Information Authority. The inevitable incompatibility between timescales for the local and the national developments is examined within the case. The work of the new NHS Information Authority and its supporting guidance in its Circular, Information for Health: Initial Local Implementation Strategies, is evaluated as a tool in aligning local and national strategy. Information Managers in other centrally governed organisations within the public sector and large corporations are often alert to similar issues.

  18. Regulatory requirements of the integrated technology demonstration program, Savannah River Site (U)

    International Nuclear Information System (INIS)

    Bergren, C.L.

    1992-01-01

    The integrated demonstration program at the Savannah River Site (SRS) involves demonstration, testing and evaluation of new characterization, monitoring, drilling and remediation technologies for soils and groundwater impacted by organic solvent contamination. The regulatory success of the demonstration program has developed as a result of open communications between the regulators and the technical teams involved. This open dialogue is an attempt to allow timely completion of applied environmental restoration demonstrations while meeting all applicable regulatory requirements. Simultaneous processing of multiple regulatory documents (satisfying RCRA, CERCLA, NEPA and various state regulations) has streamlined the overall permitting process. Public involvement is achieved as various regulatory documents are advertised for public comment consistent with the site's community relations plan. The SRS integrated demonstration has been permitted and endorsed by regulatory agencies, including the Environmental Protection Agency (EPA) and the South Carolina Department of Health and Environmental Control. EPA headquarters and regional offices are involved in DOE's integrated Demonstration Program. This relationship allows for rapid regulatory acceptance while reducing federal funding and time requirements. (author)

  19. Assessing Space Exploration Technology Requirements as a First Step Towards Ensuring Technology Readiness for International Cooperation in Space Exploration

    Science.gov (United States)

    Laurini, Kathleen C.; Hufenbach, Bernhard; Satoh, Maoki; Piedboeuf, Jean-Claude; Neumann, Benjamin

    2010-01-01

    Advancing critical and enhancing technologies is considered essential to enabling sustainable and affordable human space exploration. Critical technologies are those that enable a certain class of mission, such as technologies necessary for safe landing on the Martian surface, advanced propulsion, and closed loop life support. Others enhance the mission by leading to a greater satisfaction of mission objectives or increased probability of mission success. Advanced technologies are needed to reduce mass and cost. Many space agencies have studied exploration mission architectures and scenarios with the resulting lists of critical and enhancing technologies being very similar. With this in mind, and with the recognition that human space exploration will only be enabled by agencies working together to address these challenges, interested agencies participating in the International Space Exploration Coordination Group (ISECG) have agreed to perform a technology assessment as an important step in exploring cooperation opportunities for future exploration mission scenarios. "The Global Exploration Strategy: The Framework for Coordination" was developed by fourteen space agencies and released in May 2007. Since the fall of 2008, several International Space Exploration Coordination Group (ISECG) participating space agencies have been studying concepts for human exploration of the moon. They have identified technologies considered critical and enhancing of sustainable space exploration. Technologies such as in-situ resource utilization, advanced power generation/energy storage systems, reliable dust resistant mobility systems, and closed loop life support systems are important examples. Similarly, agencies such as NASA, ESA, and Russia have studied Mars exploration missions and identified critical technologies. They recognize that human and robotic precursor missions to destinations such as LEO, moon, and near earth objects provide opportunities to demonstrate the

  20. Initial training and technology transfer during the generational transition in the personnel of maintenance

    International Nuclear Information System (INIS)

    Gonzalez Anez, F.

    2006-01-01

    A significant progress in training capabilities of nuclear power plants maintenance personnel has taken place since mid of nineties. In the past, maintenance personnel acquired their competence throughout the years on their job positions. A greater flexibility and new polyvalence requirements demand efficient training actions. In addition, the new personnel incomes associated to the generational change require clear qualification processes. The objective is to develop didactic means and to have competent instructors to preserve and to transfer the knowledge acquires during all these past years to the new incorporations. This article describes a summary of actions and methods followed for the design, development and implantation of training plans for maintenance personnel. (Author)

  1. Energy producers in the 21. century: Digital technology at the service of consumers and the energy transition

    International Nuclear Information System (INIS)

    Chone, Fabien

    2017-01-01

    Direct Energie, a major player in France and Belgium, has compelled recognition as a well-balanced operator in the production and supply of electricity and natural gas. Having made innovation one of the major axes of its development, this firm is using digital technology for the energy transition and in response to consumer needs. Direct Energie, a supplier of 'energy 4.0', is seeking to position itself as a leader in 'orchestrating' the consumption of energy by its customers. Given this strong position as the single supplier of energy to its customers, the regulatory framework for data transmission must be reviewed to make it compatible with the 'single contract', which binds a customer to a firm that both supplies and transports energy

  2. [Chapter 2. Transitions in drug-discovery technology and drug-development in Japan (1980-2010)].

    Science.gov (United States)

    Sakakibara, Noriko; Yoshioka, Ryuzo; Matsumoto, Kazuo

    2014-01-01

    In 1970s, the material patent system was introduced in Japan. Since then, many Japanese pharmaceutical companies have endeavored to create original in-house products. From 1980s, many of the innovative products were small molecular drugs and were developed using powerful medicinal-chemical technologies. Among them were antibiotics and effective remedies for the digestive organs and circulatory organs. During this period, Japanese companies were able to launch some blockbuster drugs. At the same time, the pharmaceutical market, which had grown rapidly for two decades, was beginning to level off. From the late 1990s, drug development was slowing down due to the lack of expertise in biotechnology such as genetic engineering. In response to the circumstances, the research and development on biotechnology-based drugs such as antibody drugs have become more dynamic and popular at companies than small molecule drugs. In this paper, the writers reviewed in detail the transitions in drug discovery and development between 1980 and 2010.

  3. Optical Manufacturing and Testing Requirements Identified by the NASA Science Instruments, Observatories and Sensor Systems Technology Assessment

    Science.gov (United States)

    Stahl, H. Philip; Barney, Rich; Bauman, Jill; Feinberg, Lee; Mcleese, Dan; Singh, Upendra

    2011-01-01

    In August 2010, the NASA Office of Chief Technologist (OCT) commissioned an assessment of 15 different technology areas of importance to the future of NASA. Technology assessment #8 (TA8) was Science Instruments, Observatories and Sensor Systems (SIOSS). SIOSS assess the needs for optical technology ranging from detectors to lasers, x-ray mirrors to microwave antenna, in-situ spectrographs for on-surface planetary sample characterization to large space telescopes. The needs assessment looked across the entirety of NASA and not just the Science Mission Directorate. This paper reviews the optical manufacturing and testing technologies identified by SIOSS which require development in order to enable future NASA high priority missions.

  4. What governs the transition to a sustainable hydrogen economy? Articulating the relationship between technologies and political institutions

    International Nuclear Information System (INIS)

    Hisschemoeller, Matthijs; Bode, Ries; Kerkhof, Marleen van de

    2006-01-01

    There is a lack of integrated knowledge on the transition to a sustainable energy system. The paper focuses on the relationship between technologies and institutions in the field of hydrogen from the perspective of political theory. The paper unfolds four paradigms of governance: 'Governance by policy networking', Governance by government', 'Governance by corporate business', and 'Governance by challenge', and looks into the major line of argument in support of these paradigms and into their possible bias with respect to hydrogen options. Each of these paradigms reveals an institutional bias in that it articulates specific opportunities for collaboration and competition in order to stimulate the transition to a sustainable hydrogen economy. The paper makes the observation that there is a compelling need to reframe fashionable discourse such as the necessary shift from government to governance or from government to market. Instead, specific questions with respect to the impact of guiding policy frameworks on innovation will highlight that neither 'neutral' nor 'optimal' frameworks for policy making exist, where competing hydrogen options are at stake. The identification of paradigms of governance maybe considered a methodological device for (participator) policy analysis

  5. Current Requirements of the Society to the Professional Training of Specialists in Information Technology Industry in Japan

    Science.gov (United States)

    Pododimenko, Inna

    2014-01-01

    The problem of professional training of skilled human personnel in the industry of information communication technology, the urgency of which is recognized at the state level of Ukraine and the world, has been considered. It has been traced that constantly growing requirements of the labour market, swift scientific progress require the use of…

  6. 23 CFR 420.207 - What are the requirements for research, development, and technology transfer work programs?

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false What are the requirements for research, development, and..., DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH PLANNING AND RESEARCH PROGRAM ADMINISTRATION Research, Development and Technology Transfer Program Management § 420.207 What are the requirements for research...

  7. Technology decision making. A constructive approach to planning and acquisition will require a paradigm shift.

    Science.gov (United States)

    Berkowitz, D A; Swan, M M

    1993-01-01

    Technology should be viewed as an integrating rather than a divisive element in hospital planning. In the past, technology decision-making responsibility has often been diffused throughout hospitals, but providers are beginning to take a more considered and coherent approach. The process of making decisions about technology has four key elements: assessment, planning, acquisition, and management. The most important aspect of the assessment phase is the formation of a technology advisory committee to review and evaluate requests for new and emerging technology; review capital budget requests for new and replacement technology; and set mission-based and strategic priorities for new, emerging, and replacement technologies. Technology planning allows hospitals to set long-term goals for technology acquisition. The process involves an audit of existing technologies, evaluation of other hospitals' technologies, and review of technology trends. A well-defined technology plan will, in turn, facilitate the acquisition and management process, allowing hospitals greater flexibility in negotiating costs and budgeting for training, spare parts, service, upgrades, and support. By pooling resources with other providers in their region, hospitals can further enhance the effectiveness of their use and acquisition of technology. Collaboration allows providers to share the risks of technologically volatile and intensive services and avoid costly duplication of equipment and facilities.

  8. Animal testing, 3R models and regulatory acceptance : Technology transition in a risk-averse context

    NARCIS (Netherlands)

    Schiffelers, M.J.W.A.

    2016-01-01

    Risk avoidance has resulted in a broad range of regulations to guarantee the safety of products such as pharmaceuticals and chemicals. Many of these regulations rely on animal tests. About 3 million laboratory animals are used annually in Europe to meet such regulatory requirements.Regulatory animal

  9. Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

    Science.gov (United States)

    Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

    1989-01-01

    A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

  10. Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

    Science.gov (United States)

    Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

    1989-04-01

    A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

  11. Situation analysis of the knowledge, competencies and skill requirements of jobs in renewable energy technologies in Canada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This paper described the technological and marketing challenges of developing Canada's vast renewable energy sources. Canada's basic educational infrastructure provides a good foundation for developing renewable energy technologies in the coming decade. The following renewable energy technologies were highlighted: photovoltaic power systems; wind power systems; micro and small hydro power systems; solar air heating systems; solar water heating systems; biomass combustion systems; and, geothermal ground source heat pump systems. Each renewable technology has its own set of requirements that may differ from traditional technologies. The labour market needs and human resource considerations for these seven renewable energy technology industries were outlined. One of the main challenges lies in preparing technicians in renewable energy technologies and ensuring the availability of appropriate labour sources in relation to demand. Observations on training in renewable energies were also summarized with reference to typical jobs available within each sector, job description for each technology, qualifications and the required knowledge, skills and aptitudes for each industry. A list of Canadian company contacts by technology area was included. refs.

  12. Accumulation of operational history through emulation test to meet proven technology requirement for newly developed I and C technology

    International Nuclear Information System (INIS)

    Yeong Cheol, Shin; Sung Kon, Kang; Han Seong, Son

    2006-01-01

    As new advanced digital I and C technology with potential benefits of higher functionality and better cost effectiveness is available in the market, NPP (Nuclear Power Plant) operators are inclined to use the new technology for the construction of new plant and the upgrade of existing plants. However, this new technology poses risks to the NPP operators at the same time. These risks are mainly due to the poor reliability of newly developed technology. KHNP's past experiences with the new equipment shows many cases of reliability problems. And their consequences include unintended plant trips, lowered acceptance of the new digital technology by the plant I and C maintenance crew, and increased licensing burden in answering for questions from the nuclear regulatory body. Considering the fact that the risk of these failures in the nuclear plant operation is far greater than those in other industry, nuclear power plant operators want proven technology for I and C systems. This paper presents an approach for the emulation of operational history through which a newly developed technology becomes a proven technology. One of the essential elements of this approach is the feedback scheme of running the new equipment in emulated environment, gathering equipment failure, and correcting the design(and test bed). The emulation of environment includes normal and abnormal events of the new equipment such as reconfiguration of control system due to power failure, plant operation including full spectrum of credible scenarios in an NPP. Emulation of I and C equipment execution mode includes normal operation, initialization and termination, abnormal operation, hardware maintenance and maintenance of algorithm/software. Plant specific simulator is used to create complete profile of plant operational conditions that I and C equipment is to experience in the real plant. Virtual operating crew technology is developed to run the simulator scenarios without involvement of actual operators

  13. The transition of new technology to solve today`s problems

    Energy Technology Data Exchange (ETDEWEB)

    Kamin, R.A. [Naval Air Warfare Center, Trenton, NJ (United States); Martin, C.J.; Turner, L.M. [Defense Fuel Supply Center, Alexandria, VA (United States)

    1995-05-01

    Extensive research has been conducted in the development of methods to predict the degradation of F-44 in storage. The Low Pressure Reactor (LPR) has greatly enhanced the stability prediction capabilities necessary to make informed decisions concerning aviation fuel in storage. This technique has in the past been primarily used for research purposes. The Naval Air Warfare Center, Aircraft Division, Trenton, NJ, has used this technique successfully to assist the Defense Fuel Supply Center, Cameron Station, Alexandria, VA, in stability assessments of F-44. The High Performance Liquid Chromatography/Electrochemical Detector (HPLC/EC) antioxidant determination technique has also aided in making stability predictions by establishing the amount of inhibitor currently in the product. This paper will address two case studies in which the above new technology was used to insure the rapid detection and diagnosis of today`s field and logistic problems.

  14. 48 CFR 3004.470 - Security requirements for access to unclassified facilities, Information Technology resources...

    Science.gov (United States)

    2010-10-01

    ... access to unclassified facilities, Information Technology resources, and sensitive information. 3004.470... Technology resources, and sensitive information. ... ACQUISITION REGULATION (HSAR) GENERAL ADMINISTRATIVE MATTERS Safeguarding Classified and Sensitive Information...

  15. Unmanned Systems Acquisition and Technology Development: Is a More Integrated Approach Required

    Science.gov (United States)

    2010-11-01

    disk players to replace their cassette tape players. But it was not a disruptive technology in that mainstream consumers still bought music albums on...accepted and initially more effective sustaining technologies.39 An example of a sustaining technology would be the compact disk within the music ...technology. Initially used by only a small group college and high school students, it allowed people to convert music from a compact disk to a digital file

  16. Computational fluid dynamics research at the United Technologies Research Center requiring supercomputers

    Science.gov (United States)

    Landgrebe, Anton J.

    1987-01-01

    An overview of research activities at the United Technologies Research Center (UTRC) in the area of Computational Fluid Dynamics (CFD) is presented. The requirement and use of various levels of computers, including supercomputers, for the CFD activities is described. Examples of CFD directed toward applications to helicopters, turbomachinery, heat exchangers, and the National Aerospace Plane are included. Helicopter rotor codes for the prediction of rotor and fuselage flow fields and airloads were developed with emphasis on rotor wake modeling. Airflow and airload predictions and comparisons with experimental data are presented. Examples are presented of recent parabolized Navier-Stokes and full Navier-Stokes solutions for hypersonic shock-wave/boundary layer interaction, and hydrogen/air supersonic combustion. In addition, other examples of CFD efforts in turbomachinery Navier-Stokes methodology and separated flow modeling are presented. A brief discussion of the 3-tier scientific computing environment is also presented, in which the researcher has access to workstations, mid-size computers, and supercomputers.

  17. Monitoring Conformance and Containment for Geological Carbon Storage: Can Technology Meet Policy and Public Requirements?

    Science.gov (United States)

    Lawton, D. C.; Osadetz, K.

    2014-12-01

    The Province of Alberta, Canada identified carbon capture and storage (CCS) as a key element of its 2008 Climate Change strategy. The target is a reduction in CO2 emissions of 139 Mt/year by 2050. To encourage uptake of CCS by industry, the province has provided partial funding to two demonstration scale projects, namely the Quest Project by Shell and partners (CCS), and the Alberta Carbon Trunk Line Project (pipeline and CO2-EOR). Important to commercial scale implementation of CCS will be the requirement to prove conformance and containment of the CO2 plume injected during the lifetime of the CCS project. This will be a challenge for monitoring programs. The Containment and Monitoring Institute (CaMI) is developing a Field Research Station (FRS) to calibrate various monitoring technologies for CO2 detection thresholds at relatively shallow depths. The objective being assessed with the FRS is sensitivity for early detection of loss of containment from a deeper CO2 storage project. In this project, two injection wells will be drilled to sandstone reservoir targets at depths of 300 m and 700 m. Up to four observation wells will be drilled with monitoring instruments installed. Time-lapse surface and borehole monitoring surveys will be undertaken to evaluate the movement and fate of the CO2 plume. These will include seismic, microseismic, cross well, electrical resistivity, electromagnetic, gravity, geodetic and geomechanical surveys. Initial baseline seismic data from the FRS will presented.

  18. 40 CFR 125.94 - How will requirements reflecting best technology available for minimizing adverse environmental...

    Science.gov (United States)

    2010-07-01

    ... technology available for minimizing adverse environmental impact be established for my Phase II existing... technology available to minimize adverse environmental impact for your facility in accordance with paragraphs... technology available for minimizing adverse environmental impact. This determination must be based on...

  19. Transitional economy, technological change and women's employment: the case of Vietnam.

    Science.gov (United States)

    Nguyen Nhat Tuyen

    1999-01-01

    This paper examines the changing labor and gender relations in the process of economic change in Vietnam. The report also explores the extent of opportunities for women emerging from the processes of technological change and economic liberalization. Vietnam was able to achieve considerable progress and growth with the introduction of the policy package known as doi-moi (renovation). Along with liberalization, came withdrawal of state support in vital social sectors. Under socialism, the state had observed a set of minimum labor standards and provided facilities such as childcare, which were crucial in enabling women to participate in the public sphere. With the state receding into the background, labor has been made much vulnerable to exploitation by internal and external forces. Much affected are women who have steadily been losing all support from the state, which also affects their ability to compete equally with men in the market. Therefore, although there is a Labor Code, which guarantees the rights of workers, in particular the rights of women workers, not many women in the nonstate sector can practically enjoy its legal benefits. In order to correct this situation, the government should develop a program for the implementation and monitoring of the Labor Code, with a special focus on possible violations in the private sector.

  20. Transitioning From Paper to Digital: State Statutory and Regulatory Frameworks for Health Information Technology.

    Science.gov (United States)

    Schmit, Cason; Sunshine, Gregory; Pepin, Dawn; Ramanathan, Tara; Menon, Akshara; Penn, Matthew

    In all health system sectors, electronic health information (EHI) is created, used, released, and reused. We examined states' efforts to address EHI uses in law to provide an understanding of the EHI legal environment. Attorney researchers used WestlawNext to search for EHI-related statutes and regulations of the US states, US territories, and the District of Columbia in effect as of January 2014. The researchers independently catalogued provisions by the EHI use described in the law. Researchers resolved discrepancies through peer review meetings and recorded the consensus codes for each law. This study identified 2364 EHI-related laws representing 49 EHI uses in 54 jurisdictions. A total of 18 EHI uses were regulated by ≥10 jurisdictions. More than 750 laws addressed 2 or more EHI uses. Jurisdictions varied by the number of EHI laws in effect, with a mean of 44 laws. Texas had the most EHI laws (n = 145). Hawaii and South Carolina had the fewest (n = 14 each). The EHI legal landscape is complex. The large quantity and diversity of laws complicate legal analysis, likely delay implementation of public health solutions, and might be detrimental to the development of emerging health information technology. Research is needed to understand the effect of EHI-related laws.

  1. The evolution of atmospheric science goals and enhanced technology needed to satisfy remote sensing requirements

    Science.gov (United States)

    Russell, J. M., III

    2017-12-01

    The era of satellite observations of Earth's atmosphere has undergone a remarkable and dramatic evolution since temperature measurements were first made from the Nimbus 3 satellite launched in April 1969. Since those early days of discovery, amazing progress has occurred in scientific understanding of the atmosphere. The launch of Nimbus 7 in October 1978 provided an explosion of information on the composition of the stratosphere revealing for the first time the global distributions of stratospheric O3, H2O, CH4, CO, NO, NO2, HNO3 and aerosols. The SAGE series of satellites begun in 1979 and the Upper Atmosphere Research Satellite deployed from the Space Shuttle in October 1991 added new and more tenuous stratospheric gases especially in the odd chlorine family. Measurements of stratospheric ozone destroying chlorine and bromine compounds have continued with the EOS suite of satellites. Measurements from the TIMED satellite have provided a 15-year data set for study of the energetics, chemistry and dynamics of the mesosphere and lower thermosphere and vertical coupling between atmospheric regions. The AIM satellite has provided a 10-year data base of the tenuous layer of mesopause level noctilucent clouds and horizontal coupling between hemispheres. This progression of knowledge and measurement capability has evolved together as the needs developed to observe and characterize less abundant but more important atmospheric constituents and processes. This talk summarizes some of the key science results, the technology challenges that had to be overcome to enable the measurements and a view toward the future to meet new science requirements.

  2. The constraints in managing a transition towards clean energy technologies in developing nations: reflection on energy governance and alternative policy options.

    NARCIS (Netherlands)

    Thiam, D.R.; Moll, H.C.

    2012-01-01

    The purpose of this paper is to provide a conceptual framework stimulating a sustainable energy transition in developing nations. Based on the existing literature, we first index theoretical factors preventing deployment of low carbon technologies. After having identified these factors, we provide

  3. Technology Requirements For a Square-Meter, Arcsecond-Resolution Telescope for X-Rays: The SMART-X Mission

    Science.gov (United States)

    Schwartz, Daniel A.; Allured, Ryan; Bookbinder, Jay; Cotroneo, Vincenzo; Forman, William; Freeman, Mark; McMuldroch, Stuart; Reid, Paul; Tananbaum, Harvey; Vikhlinin, Alexey; hide

    2014-01-01

    Addressing the astrophysical problems of the 2020's requires sub-arcsecond x-ray imaging with square meter effective area. Such requirements can be derived, for example, by considering deep x-ray surveys to find the young black holes in the early universe (large redshifts) which will grow into the first supermassive black holes. We have envisioned a mission based on adjustable x-ray optics technology, in order to achieve the required reduction of mass to collecting area for the mirrors. We are pursuing technology which effects this adjustment via thin film piezoelectric "cells" deposited directly on the non-reflecting sides of thin, slumped glass. While SMARTX will also incorporate state-of-the-art x-ray cameras, the remaining spacecraft systems have no more stringent requirements than those which are well understood and proven on the current Chandra X-ray Observatory.

  4. Tethys: The Marine and Hydrokinetic Technology Environmental Impacts Knowledge Management System -- Requirements Specification -- Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Butner, R. Scott; Snowden-Swan, Lesley J.; Ellis, Peter C.

    2010-11-09

    The marine and hydrokinetic (MHK) environmental impacts knowledge management system (KMS), dubbed Tethys after the mythical Greek goddess of the seas, is being developed for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy Wind and Hydropower Technologies Program (WHTP) by Pacific Northwest National Laboratory (PNNL). This requirements specification establishes the essential capabilities required of Tethys and clarifies for WHTP and the Tethys development team the results that must be achieved by the system.

  5. Competencies Required for Healthcare Information Technology to Be an Effective Strategic Business Change Partner

    Science.gov (United States)

    Davalos, Eugenia

    2013-01-01

    One of the core strategies to transform the United States national healthcare system is the implementation of key technologies such as the electronic patient medical record. Such key technologies improve patient care and help the organization gain competitive advantage. With a high demand for strategic and operational change, healthcare providers…

  6. Addressing AACSB Global and Technology Requirements: Exploratory Assessment of a Marketing Management Assignment

    Science.gov (United States)

    Greene, Scott; Bao, Yongchuan

    2009-01-01

    The Association to Advance Collegiate Schools of Business (AACSB) standards mandate knowledge of global and technology issues. Businesses desire employees with ability to analyze international markets and to be adept with technology. Taxpayers supporting public universities and organizations hiring business school graduates expect accountability…

  7. Removing Obstacles to the Pedagogical Changes Required by Jonassen's Vision of Authentic Technology-Enabled Learning

    Science.gov (United States)

    Ertmer, Peggy A.; Ottenbreit-Leftwich, Anne

    2013-01-01

    Educators have been striving to achieve meaningful technology use in our K-12 classrooms for over 30 years. Yet, despite significant investments of time and money in infrastructure, training, and support "we have few assurances that [educators] are able to use technology for teaching and learning" (NEA, 2008, p. 1). In this article, we call for a…

  8. An Historical Overview of the Production Requirement for the Satellite Technology Demonstration. Technical Report No. 0504.

    Science.gov (United States)

    Smith, Myron P.; Sosey, Phillip

    The Satellite Technology Demonstration employs the latest telecommunications technology to deliver community oriented programing to rural areas. To meet the demand for contemporary broadcasts responsive to community needs, a studio was constructed in the Denver area to produce and coordinate future programs for the Rocky Mountains area. Problems…

  9. Design and Development of Maize Dehusker cum Sheller: A Technology for Northern Transition Zone of Karnataka, India

    Science.gov (United States)

    Chilur, Rudragouda; Kumar, Sushilendra

    2018-06-01

    The Maize ( Zea mays L.) crop is one of the most important cereal in agricultural production systems of Northern Transition Zone (Hyderabad-Karnataka region) in India. These Hyderabad Karnataka farmers (small-medium) are lack of economic technologies with maize dehusking and shelling, which fulfils the two major needs as crops and as livestock in farming. The portable medium size (600 kg/h capacity) electric motor (2.23 kW) operated Maize Dehusker cum Sheller (MDS) was designed to resolve the issue by considering engineering properties of maize. The developed trapezium shaped MDS machine having overall dimensions (length × (top and bottom) × height) of 1200 × (500 and 610) × 810 mm. The selected operational parameters viz, cylinder peripheral speed (7.1 m/s), concave clearance (25 mm) and feed rate (600 kg/h) were studied for machine-performance and seed-quality parameters. The performance of machine under these parameters showed the dehusking efficiency of 99.56%, shelling efficiency of 98.01%, cleaning efficiency of 99.11%, total loss of 3.63% machine capacity of 527.11 kg/kW-h and germination percentage of 98.93%. Overall machine performance was found satisfactory for maize dehusking cum shelling operation as well as to produce the maize grains for seeding purpose.

  10. Brain-wave measures of workload in advanced cockpits: The transition of technology from laboratory to cockpit simulator, phase 2

    Science.gov (United States)

    Horst, Richard L.; Mahaffey, David L.; Munson, Robert C.

    1989-01-01

    The present Phase 2 small business innovation research study was designed to address issues related to scalp-recorded event-related potential (ERP) indices of mental workload and to transition this technology from the laboratory to cockpit simulator environments for use as a systems engineering tool. The project involved five main tasks: (1) Two laboratory studies confirmed the generality of the ERP indices of workload obtained in the Phase 1 study and revealed two additional ERP components related to workload. (2) A task analysis' of flight scenarios and pilot tasks in the Advanced Concepts Flight Simulator (ACFS) defined cockpit events (i.e., displays, messages, alarms) that would be expected to elicit ERPs related to workload. (3) Software was developed to support ERP data analysis. An existing ARD-proprietary package of ERP data analysis routines was upgraded, new graphics routines were developed to enhance interactive data analysis, and routines were developed to compare alternative single-trial analysis techniques using simulated ERP data. (4) Working in conjunction with NASA Langley research scientists and simulator engineers, preparations were made for an ACFS validation study of ERP measures of workload. (5) A design specification was developed for a general purpose, computerized, workload assessment system that can function in simulators such as the ACFS.

  11. Design and Development of Maize Dehusker cum Sheller: A Technology for Northern Transition Zone of Karnataka, India

    Science.gov (United States)

    Chilur, Rudragouda; Kumar, Sushilendra

    2018-02-01

    The Maize (Zea mays L.) crop is one of the most important cereal in agricultural production systems of Northern Transition Zone (Hyderabad-Karnataka region) in India. These Hyderabad Karnataka farmers (small-medium) are lack of economic technologies with maize dehusking and shelling, which fulfils the two major needs as crops and as livestock in farming. The portable medium size (600 kg/h capacity) electric motor (2.23 kW) operated Maize Dehusker cum Sheller (MDS) was designed to resolve the issue by considering engineering properties of maize. The developed trapezium shaped MDS machine having overall dimensions (length × (top and bottom) × height) of 1200 × (500 and 610) × 810 mm. The selected operational parameters viz, cylinder peripheral speed (7.1 m/s), concave clearance (25 mm) and feed rate (600 kg/h) were studied for machine-performance and seed-quality parameters. The performance of machine under these parameters showed the dehusking efficiency of 99.56%, shelling efficiency of 98.01%, cleaning efficiency of 99.11%, total loss of 3.63% machine capacity of 527.11 kg/kW-h and germination percentage of 98.93%. Overall machine performance was found satisfactory for maize dehusking cum shelling operation as well as to produce the maize grains for seeding purpose.

  12. E-learning as a technological tool to meet the requirements of occupational standards in training of it specialists

    Science.gov (United States)

    Tokareva, N. A.; Tyatyushkina, O. Y.; Cheremisina, E. N.

    2016-09-01

    We discuss issues of updating educational programs to meet requirements of the labor market and occupational standards of IT industry. We suggest the technology of e-learning that utilizes an open educational resource to provide the employers' participation in the development of educational content and the intensification of practical training.

  13. Virtual reality technology as a tool for human factors requirements evaluation in design of the nuclear reactors control desks

    International Nuclear Information System (INIS)

    Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Mol, Antonio C.A.; Carvalho, Paulo V.R.; Silva, Antonio C.F.; Ferreira, Francisco J.O.; Dutra, Marco A.M.

    2007-01-01

    The Virtual Reality (VR) is an advanced computer interface technology that allows the user to internet or to explore a three-dimensional environment through the computer, as was part of the virtual world. This technology presents great applicability in the most diverse areas of the human knowledge. This paper presents a study on the use of the VR as tool for human factors requirements evaluation in design of the nuclear reactors control desks. Moreover, this paper presents a case study: a virtual model of the control desk, developed using virtual reality technology to be used in the human factors requirements evaluation. This case study was developed in the Virtual Reality Laboratory at IEN, and understands the stereo visualization of the Argonauta research nuclear reactor control desk for a static ergonomic evaluation using check-lists, in accordance to the standards and human factors nuclear international guides (IEC 1771, NUREG-0700). (author)

  14. Virtual reality technology as a tool for human factors requirements evaluation in design of the nuclear reactors control desks

    Energy Technology Data Exchange (ETDEWEB)

    Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Mol, Antonio C.A.; Carvalho, Paulo V.R.; Silva, Antonio C.F.; Ferreira, Francisco J.O.; Dutra, Marco A.M. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)]. E-mail: grecco@ien.gov.br; luquetti@ien.gov.br; mol@ien.gov.br; paulov@ien.gov.br; tonico@ien.gov.br; fferreira@ien.gov.br; dutra@ien.gov.br

    2007-07-01

    The Virtual Reality (VR) is an advanced computer interface technology that allows the user to internet or to explore a three-dimensional environment through the computer, as was part of the virtual world. This technology presents great applicability in the most diverse areas of the human knowledge. This paper presents a study on the use of the VR as tool for human factors requirements evaluation in design of the nuclear reactors control desks. Moreover, this paper presents a case study: a virtual model of the control desk, developed using virtual reality technology to be used in the human factors requirements evaluation. This case study was developed in the Virtual Reality Laboratory at IEN, and understands the stereo visualization of the Argonauta research nuclear reactor control desk for a static ergonomic evaluation using check-lists, in accordance to the standards and human factors nuclear international guides (IEC 1771, NUREG-0700). (author)

  15. Investigation of the current requirements engineering practices among software developers at the Universiti Utara Malaysia Information Technology (UUMIT) centre

    Science.gov (United States)

    Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Abdullah, Inam

    2016-08-01

    Requirements Engineering (RE) is a systemic and integrated process of eliciting, elaborating, negotiating, validating and managing of the requirements of a system in a software development project. UUM has been supported by various systems developed and maintained by the UUM Information Technology (UUMIT) Centre. The aim of this study was to assess the current requirements engineering practices at UUMIT. The main problem that prompted this research is the lack of studies that support software development activities at the UUMIT. The study is geared at helping UUMIT produce quality but time and cost saving software products by implementing cutting edge and state of the art requirements engineering practices. Also, the study contributes to UUM by identifying the activities needed for software development so that the management will be able to allocate budget to provide adequate and precise training for the software developers. Three variables were investigated: Requirement Description, Requirements Development (comprising: Requirements Elicitation, Requirements Analysis and Negotiation, Requirements Validation), and Requirement Management. The results from the study showed that the current practice of requirement engineering in UUMIT is encouraging, but still need further development and improvement because a few RE practices were seldom practiced.

  16. Grand Challenges: Science, Engineering, and Societal Advances, Requiring Networking and Information Technology Research and Development

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — ...the U.S. Government makes critical decisions about appropriate investments in IT R and D to help society forward both socially and economically. To inform that...

  17. The Potential of RFID Technology in the Textile and Clothing Industry: Opportunities, Requirements and Challenges

    Science.gov (United States)

    Legnani, Elena; Cavalieri, Sergio; Pinto, Roberto; Dotti, Stefano

    In the current competitive environment, companies need to extensively exploit the use of advanced technologies in order to develop a sustainable advantage, enhance their operational efficiency and better serve customers. In this context, RFID technology has emerged as a valid support for the company progress and its value is becoming more and more apparent. In particular, the textile and clothing industry, characterised by short life-cycles , quick response production , fast distribution, erratic customer preferences and impulsive purchasing, is one of the sectors which can extensively benefit from the RFID technology. However, actual applications are still very limited, especially in the upstream side of the supply network. This chapter provides an insight into the main benefits and potentials of this technology and highlights the main issues which are currently inhibiting its large scale development in the textile and clothing industry. The experience of two industry-academia projects and the relative fallouts are reported.

  18. Implementation of electronic medical records requires more than new software: Lessons on integrating and managing health technologies from Mbarara, Uganda.

    Science.gov (United States)

    Madore, Amy; Rosenberg, Julie; Muyindike, Winnie R; Bangsberg, David R; Bwana, Mwebesa B; Martin, Jeffrey N; Kanyesigye, Michael; Weintraub, Rebecca

    2015-12-01

    Implementation lessons: • Technology alone does not necessarily lead to improvement in health service delivery, in contrast to the common assumption that advanced technology goes hand in hand with progress. • Implementation of electronic medical record (EMR) systems is a complex, resource-intensive process that, in addition to software, hardware, and human resource investments, requires careful planning, change management skills, adaptability, and continuous engagement of stakeholders. • Research requirements and goals must be balanced with service delivery needs when determining how much information is essential to collect and who should be interfacing with the EMR system. • EMR systems require ongoing monitoring and regular updates to ensure they are responsive to evolving clinical use cases and research questions. • High-quality data and analyses are essential for EMRs to deliver value to providers, researchers, and patients. Copyright © 2015 Elsevier Inc. All rights reserved.

  19. Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Command, Control, and Communications (C3)

    Science.gov (United States)

    2005-01-01

    The document provides the Human System Integration(HSI) high-level functional C3 HSI requirements for the interface to the pilot. Description includes (1) the information required by the pilot to have knowledge C3 system status, and (2) the control capability needed by the pilot to obtain C3 information. Fundamentally, these requirements provide the candidate C3 technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how C3 operations and functions should interface with the pilot to provide the necessary C3 functionality to the UA-pilot system. Requirements and guidelines for C3 are partitioned into three categories: (1) Pilot-Air Traffic Control (ATC) Voice Communications (2) Pilot-ATC Data Communications, and (3) command and control of the unmanned aircraft (UA). Each requirement is stated and is supported with a rationale and associated reference(s).

  20. The iPad and mobile technology revolution: benefits and challenges for individuals who require augmentative and alternative communication.

    Science.gov (United States)

    McNaughton, David; Light, Janice

    2013-06-01

    The iPad and other mobile technologies provide powerful new tools to potentially enhance communication for individuals with developmental disabilities, acquired neurogenic disorders, and degenerative neurological conditions. These mobile technologies offer a number of potential benefits, including: (a) increased awareness and social acceptance of augmentative and alternative communication (AAC), (b) greater consumer empowerment in accessing AAC solutions, (c) increased adoption of AAC technologies, (d) greater functionality and interconnectivity, and (e) greater diffusion of AAC research and development. However, there remain a number of significant challenges that must be addressed if these benefits are to be fully realized: (a) to ensure the focus is on communication, not just technology, (b) to develop innovative models of AAC service delivery to ensure successful outcomes, (c) to ensure ease of access for all individuals who require AAC, and, (d) to maximize AAC solutions to support a wide variety of communication functions. There is an urgent need for effective collaboration among key stakeholders to support research and development activities, and to ensure the successful implementation of mobile technologies to enhance communication outcomes for individuals who require AAC and their families.

  1. Design study of technology requirements for high performance single-propeller-driven business airplanes

    Science.gov (United States)

    Kohlman, D. L.; Hammer, J.

    1985-01-01

    Developments in aerodyamic, structural and propulsion technologies which influence the potential for significant improvements in performance and fuel efficiency of general aviation business airplanes are discussed. The advancements include such technolgies as natural laminar flow, composite materials, and advanced intermittent combustion engines. The design goal for this parameter design study is a range of 1300 nm at 300 knots true airspeed with a payload of 1200lbs at 35,000 ft cruise altitude. The individual and synergistic effects of various advanced technologies on the optimization of this class of high performance, single engine, propeller driven business airplanes are identified.

  2. Blastomyces dermatitidis septins CDC3, CDC10, and CDC12 impact the morphology of yeast and hyphae, but are not required for the phase transition.

    Science.gov (United States)

    Marty, Amber J; Gauthier, Gregory M

    2013-01-01

    Blastomyces dermatitidis, the etiologic agent of blastomycosis, belongs to a group of thermally dimorphic fungi that change between mold (22°C) and yeast (37°C) in response to temperature. The contribution of structural proteins such as septins to this phase transition in these fungi remains poorly understood. Septins are GTPases that serve as a scaffold for proteins involved with cytokinesis, cell polarity, and cell morphology. In this study, we use a GFP sentinel RNA interference system to investigate the impact of CDC3, CDC10, CDC12, and ASPE on the morphology and phase transition of B. dermatitidis. Targeting CDC3, CDC10, and CDC12 by RNA interference resulted in yeast with aberrant morphology at 37°C with defects in cytokinesis. Downshifting the temperature to 22°C promoted the conversion to the mold phase, but did not abrogate the morphologic defects. CDC3, CDC10, and CDC12 knockdown strains grew as mold with curved, thickened hyphae. Knocking down ASPE transcript did not alter morphology of yeast at 37°C or mold at 22°C. Following an increase in temperature from 22°C to 37°C, all septin knockdown strains were able to revert to yeast. In conclusion, CDC3, CDC10, and CDC12 septin- encoding genes are required for proper morphology of yeast and hyphae, but are dispensable for the phase transition.

  3. Phase transitions

    CERN Document Server

    Sole, Ricard V; Solé, Ricard V; Solé, Ricard V; Sol, Ricard V; Solé, Ricard V

    2011-01-01

    Phase transitions--changes between different states of organization in a complex system--have long helped to explain physics concepts, such as why water freezes into a solid or boils to become a gas. How might phase transitions shed light on important problems in biological and ecological complex systems? Exploring the origins and implications of sudden changes in nature and society, Phase Transitions examines different dynamical behaviors in a broad range of complex systems. Using a compelling set of examples, from gene networks and ant colonies to human language and the degradation of diverse ecosystems, the book illustrates the power of simple models to reveal how phase transitions occur. Introductory chapters provide the critical concepts and the simplest mathematical techniques required to study phase transitions. In a series of example-driven chapters, Ricard Solé shows how such concepts and techniques can be applied to the analysis and prediction of complex system behavior, including the origins of ...

  4. 42 CFR 495.332 - State Medicaid health information technology (HIT) plan requirements.

    Science.gov (United States)

    2010-10-01

    ... and strategic plan for the next 5 years. (2) A description of how the State Medicaid HIT plan will be... processes that enable improved program administration for the Medicaid enterprise; (ii) Includes business... used certified EHR technology during the EHR reporting period, and that they have adopted, implemented...

  5. 48 CFR 352.239-72 - Security requirements for Federal information technology resources.

    Science.gov (United States)

    2010-10-01

    ..., Security Self-Assessment Guide for Information Technology Systems and FIPS 200, on an annual basis. (C) HHS... basis, the Contractor shall provide to the Contracting Officer verification that the IT-SP remains valid... Contracting Officer verification that the IT-SC&A remains valid. Evidence of a valid system accreditation...

  6. Technologies required for safe and profitable deep level gold mining, South Africa

    CSIR Research Space (South Africa)

    Willis, PH

    2000-01-01

    Full Text Available Since the 14th CMMI conference, held in Edinburgh in 1990, at which a paper was presented by the author (Willis, 1990) reviewing the role of integrating new technology as a survival strategy for South African gold mines, considerable change has...

  7. 40 CFR 125.3 - Technology-based treatment requirements in permits.

    Science.gov (United States)

    2010-07-01

    ... fundamentally different control technology than under permits for an industrial category issued before such date... reduction benefits to be achieved from such application; (ii) The age of equipment and facilities involved... to the cost and level of reduction of such pollutants from a class or category of industrial sources...

  8. Digital Technology in Teaching International Business: Is a Tradeoff between Richness and Reach Required?

    Science.gov (United States)

    Wymbs, Cliff; Kijne, Hugo

    2003-01-01

    This analysis extends the traditional marketing tradeoffs between richness (depth of knowledge) and reach (geographic area coverage) to the emerging technology-mediated education industry, and then specifically evaluates their effect on the teaching of international business. It asserts that interactive learning, particularly as it applies to team…

  9. Barriers and requirements for achieving interoperable eHealth technology in primary care

    NARCIS (Netherlands)

    Oude Nijeweme-d'Hollosy, Wendeline; van Velsen, Lex Stefan; Hermens, Hermanus J.

    2015-01-01

    Despite its great promises, eHealth is not yet structurally embedded within the IT infrastructure of primary care. This is mainly due to the fact that healthcare technologies have been developed without coordination and a centralized approach [1], which in turn has led to a lack of shared standards

  10. Pantothenate kinase 1 is required to support the metabolic transition from the fed to the fasted state.

    Directory of Open Access Journals (Sweden)

    Roberta Leonardi

    2010-06-01

    Full Text Available Coenzyme A (CoA biosynthesis is regulated by the pantothenate kinases (PanK, of which there are four active isoforms. The PanK1 isoform is selectively expressed in liver and accounted for 40% of the total PanK activity in this organ. CoA synthesis was limited using a Pank1(-/- knockout mouse model to determine whether the regulation of CoA levels was critical to liver function. The elimination of PanK1 reduced hepatic CoA levels, and fasting triggered a substantial increase in total hepatic CoA in both Pank1(-/- and wild-type mice. The increase in hepatic CoA during fasting was blunted in the Pank1(-/- mouse, and resulted in reduced fatty acid oxidation as evidenced by abnormally high accumulation of long-chain acyl-CoAs, acyl-carnitines, and triglycerides in the form of lipid droplets. The Pank1(-/- mice became hypoglycemic during a fast due to impaired gluconeogenesis, although ketogenesis was normal. These data illustrate the importance of PanK1 and elevated liver CoA levels during fasting to support the metabolic transition from glucose utilization and fatty acid synthesis to gluconeogenesis and fatty acid oxidation. The findings also suggest that PanK1 may be a suitable target for therapeutic intervention in metabolic disorders that feature hyperglycemia and hypertriglyceridemia.

  11. User Requirements for Technology to Assist Aging in Place: Qualitative Study of Older People and Their Informal Support Networks.

    Science.gov (United States)

    Elers, Phoebe; Hunter, Inga; Whiddett, Dick; Lockhart, Caroline; Guesgen, Hans; Singh, Amardeep

    2018-06-06

    Informal support is essential for enabling many older people to age in place. However, there is limited research examining the information needs of older adults' informal support networks and how these could be met through home monitoring and information and communication technologies. The purpose of this study was to investigate how technologies that connect older adults to their informal and formal support networks could assist aging in place and enhance older adults' health and well-being. Semistructured interviews were conducted with 10 older adults and a total of 31 members of their self-identified informal support networks. They were asked questions about their information needs and how technology could support the older adults to age in place. The interviews were transcribed and thematically analyzed. The analysis identified three overarching themes: (1) the social enablers theme, which outlined how timing, informal support networks, and safety concerns assist the older adults' uptake of technology, (2) the technology concerns theme, which outlined concerns about cost, usability, information security and privacy, and technology superseding face-to-face contact, and (3) the information desired theme, which outlined what information should be collected and transferred and who should make decisions about this. Older adults and their informal support networks may be receptive to technology that monitors older adults within the home if it enables aging in place for longer. However, cost, privacy, security, and usability barriers would need to be considered and the system should be individualizable to older adults' changing needs. The user requirements identified from this study and described in this paper have informed the development of a technology that is currently being prototyped. ©Phoebe Elers, Inga Hunter, Dick Whiddett, Caroline Lockhart, Hans Guesgen, Amardeep Singh. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 06.06.2018.

  12. Robust Requirements Tracing via Internet Search Technology: Improving an IV and V Technique. Phase 2

    Science.gov (United States)

    Hayes, Jane; Dekhtyar, Alex

    2004-01-01

    There are three major objectives to this phase of the work. (1) Improvement of Information Retrieval (IR) methods for Independent Verification and Validation (IV&V) requirements tracing. Information Retrieval methods are typically developed for very large (order of millions - tens of millions and more documents) document collections and therefore, most successfully used methods somewhat sacrifice precision and recall in order to achieve efficiency. At the same time typical IR systems treat all user queries as independent of each other and assume that relevance of documents to queries is subjective for each user. The IV&V requirements tracing problem has a much smaller data set to operate on, even for large software development projects; the set of queries is predetermined by the high-level specification document and individual requirements considered as query input to IR methods are not necessarily independent from each other. Namely, knowledge about the links for one requirement may be helpful in determining the links of another requirement. Finally, while the final decision on the exact form of the traceability matrix still belongs to the IV&V analyst, his/her decisions are much less arbitrary than those of an Internet search engine user. All this suggests that the information available to us in the framework of the IV&V tracing problem can be successfully leveraged to enhance standard IR techniques, which in turn would lead to increased recall and precision. We developed several new methods during Phase II; (2) IV&V requirements tracing IR toolkit. Based on the methods developed in Phase I and their improvements developed in Phase II, we built a toolkit of IR methods for IV&V requirements tracing. The toolkit has been integrated, at the data level, with SAIC's SuperTracePlus (STP) tool; (3) Toolkit testing. We tested the methods included in the IV&V requirements tracing IR toolkit on a number of projects.

  13. Lightweight high-performance 1-4 meter class spaceborne mirrors: emerging technology for demanding spaceborne requirements

    Science.gov (United States)

    Hull, Tony; Hartmann, Peter; Clarkson, Andrew R.; Barentine, John M.; Jedamzik, Ralf; Westerhoff, Thomas

    2010-07-01

    Pending critical spaceborne requirements, including coronagraphic detection of exoplanets, require exceptionally smooth mirror surfaces, aggressive lightweighting, and low-risk cost-effective optical manufacturing methods. Simultaneous development at Schott for production of aggressively lightweighted (>90%) Zerodur® mirror blanks, and at L-3 Brashear for producing ultra-smooth surfaces on Zerodur®, will be described. New L-3 techniques for large-mirror optical fabrication include Computer Controlled Optical Surfacing (CCOS) pioneered at L-3 Tinsley, and the world's largest MRF machine in place at L-3 Brashear. We propose that exceptional mirrors for the most critical spaceborne applications can now be produced with the technologies described.

  14. THE IMPORTANCE OF FOREIGH LANGUAGE IN TRAINING OF TOURISM AND SERVICE EXPERTS:MODERN REQUIREMENTS AND INNOVATIVE TECHNOLOGIES

    OpenAIRE

    Савчук, Н.І.

    2016-01-01

    The role and importance of foreign language study in the activity of tourism and service companies’workers are studied. The employers’requirements to the employers for the job in Tourism sphere are analysed. The study of foreign languages in tourism, innovative technologies by means of international and intercultural communication of a modern expert’s communicative and educational needs are reviewed. The study of definite problem is greatly complicated by the fact that the candidate for the...

  15. The advancement of electric vehicles - case: Tesla Motors. Disruptive technology requiring systemic innovating

    OpenAIRE

    Lehtinen, Petri

    2015-01-01

    Electric vehicles have existed for over 100 years as a disruptive innovation. Even though they have always been easier to use, quieter and cleaner, gasoline cars have beaten it in price, range and faster fueling. As gasoline cars have been the technological standard for the past 150 years there has been no motivation by car manufacturers to advance electric vehicles. By producing electric vehicles Tesla Motors has appropriately become the first successful startup car manufacturer in over 100 ...

  16. A life-cycle approach to technology, infrastructure, and climate policy decision making: Transitioning to plug-in hybrid electric vehicles and low-carbon electricity

    Science.gov (United States)

    Samaras, Constantine

    In order to mitigate the most severe effects of climate change, large global reductions in the current levels of anthropogenic greenhouse gas (GHG) emissions are required in this century to stabilize atmospheric carbon dioxide (CO2) concentrations at less than double pre-industrial levels. The Intergovernmental Panel on Climate Change (IPCC) fourth assessment report states that GHG emissions should be reduced to 50-80% of 2000 levels by 2050 to increase the likelihood of stabilizing atmospheric CO2 concentrations. In order to achieve the large GHG reductions by 2050 recommended by the IPCC, a fundamental shift and evolution will be required in the energy system. Because the electric power and transportation sectors represent the largest GHG emissions sources in the United States, a unique opportunity for coupling these systems via electrified transportation could achieve synergistic environmental (GHG emissions reductions) and energy security (petroleum displacement) benefits. Plug-in hybrid electric vehicles (PHEVs), which use electricity from the grid to power a portion of travel, could play a major role in reducing greenhouse gas emissions from the transport sector. However, this thesis finds that life cycle GHG emissions from PHEVs depend on the electricity source that is used to charge the battery, so meaningful GHG emissions reductions with PHEVs are conditional on low-carbon electricity sources. Power plants and their associated GHGs are long-lived, and this work argues that decisions made regarding new electricity supplies within the next ten years will affect the potential of PHEVs to play a role in a low-carbon future in the coming decades. This thesis investigates the life cycle engineering, economic, and policy decisions involved in transitioning to PHEVs and low-carbon electricity. The government has a vast array of policy options to promote low-carbon technologies, some of which have proven to be more successful than others. This thesis uses life

  17. Complex Systems Engineering : Designing in sociotechnical systems for the energy transition

    NARCIS (Netherlands)

    Moncada Escudero, J.A.; Nava Guerrero, G.D.C.; Park Lee, H.; Okur, Ö.; Chakraborty, S.T.; Lukszo, Z.

    2017-01-01

    The EU has set ambitious targets for an energy transition. While research often focuses on technology, institutions or actors, a transition requires complex coordination and comprehensive analysis and design. We propose a framework accounting for technology, institutions and actors' perspective

  18. Personal radiation detector at a high technology readiness level that satisfies DARPA's SN-13-47 and SIGMA program requirements

    Science.gov (United States)

    Ginzburg, D.; Knafo, Y.; Manor, A.; Seif, R.; Ghelman, M.; Ellenbogen, M.; Pushkarsky, V.; Ifergan, Y.; Semyonov, N.; Wengrowicz, U.; Mazor, T.; Kadmon, Y.; Cohen, Y.; Osovizky, A.

    2015-06-01

    There is a need to develop new personal radiation detector (PRD) technologies that can be mass produced. On August 2013, DARPA released a request for information (RFI) seeking innovative radiation detection technologies. In addition, on December 2013, a Broad Agency Announcement (BAA) for the SIGMA program was released. The RFI requirements focused on a sensor that should possess three main properties: low cost, high compactness and radioisotope identification capabilities. The identification performances should facilitate the detection of a hidden threat, ranging from special nuclear materials (SNM) to commonly used radiological sources. Subsequently, the BAA presented the specific requirements at an instrument level and provided a comparison between the current market status (state-of-the-art) and the SIGMA program objectives. This work presents an optional alternative for both the detection technology (sensor with communication output and without user interface) for DARPA's initial RFI and for the PRD required by the SIGMA program. A broad discussion is dedicated to the method proposed to fulfill the program objectives and to the selected alternative that is based on the PDS-GO design and technology. The PDS-GO is the first commercially available PRD that is based on a scintillation crystal optically coupled with a silicon photomultiplier (SiPM), a solid-state light sensor. This work presents the current performance of the instrument and possible future upgrades based on recent technological improvements in the SiPM design. The approach of utilizing the SiPM with a commonly available CsI(Tl) crystal is the key for achieving the program objectives. This approach provides the appropriate performance, low cost, mass production and small dimensions; however, it requires a creative approach to overcome the obstacles of the solid-state detector dark current (noise) and gain stabilization over a wide temperature range. Based on the presented results, we presume that

  19. Technology Requirements for a Square Meter, Arcsecond Resolution Telescope for X-Rays: The SMART-X Mission

    Science.gov (United States)

    Schwartz, Daniel A.; Allured, Ryan; Bookbinder, Jay A.; Cotroneo, Vincenzo; Forman, William R.; Freeman, Mark D.; McMuldroch, Stuart; Reid, Paul B.; Tananbaum, Harvey; Vikhlinin, Alexey A.; hide

    2014-01-01

    Addressing the astrophysical problems of the 2020's requires sub-arcsecond x-ray imaging with square meter effective area. Such requirements can be derived, for example, by considering deep x-ray surveys to find the young black holes in the early universe (large redshifts) which will grow into the first super-massive black holes. We have envisioned a mission, the Square Meter Arcsecond Resolution Telescope for X-rays (SMART-X), based on adjustable x-ray optics technology, incorporating mirrors with the required small ratio of mass to collecting area. We are pursuing technology which achieves sub-arcsecond resolution by on-orbit adjustment via thin film piezoelectric "cells" deposited directly on the non-reflecting sides of thin, slumped glass. While SMART-X will also incorporate state-of-the-art x-ray cameras, the remaining spacecraft systems have no requirements more stringent than those which are well understood and proven on the current Chandra X-ray Observatory.

  20. Effect of power system technology and mission requirements on high altitude long endurance aircraft

    Science.gov (United States)

    Colozza, Anthony J.

    1994-01-01

    An analysis was performed to determine how various power system components and mission requirements affect the sizing of a solar powered long endurance aircraft. The aircraft power system consists of photovoltaic cells and a regenerative fuel cell. Various characteristics of these components, such as PV cell type, PV cell mass, PV cell efficiency, fuel cell efficiency, and fuel cell specific mass, were varied to determine what effect they had on the aircraft sizing for a given mission. Mission parameters, such as time of year, flight altitude, flight latitude, and payload mass and power, were also altered to determine how mission constraints affect the aircraft sizing. An aircraft analysis method which determines the aircraft configuration, aspect ratio, wing area, and total mass, for maximum endurance or minimum required power based on the stated power system and mission parameters is presented. The results indicate that, for the power system, the greatest benefit can be gained by increasing the fuel cell specific energy. Mission requirements also substantially affect the aircraft size. By limiting the time of year the aircraft is required to fly at high northern or southern latitudes, a significant reduction in aircraft size or increase in payload capacity can be achieved.

  1. Diverse and uneven pathways towards transition to low carbon development: The case of diffusion of solar PV technology in China

    NARCIS (Netherlands)

    Iizuka, M.

    2014-01-01

    Transition towards low carbon development (LCD) is an urgent challenge for the global community. As increased economic activities usually result in more carbon emissions, this challenge is particularly crucial for rapidly growing emerging countries. For these countries, reducing carbon emissions

  2. Assessment of the technology required to develop photovoltaic power system for large scale national energy applications

    Science.gov (United States)

    Lutwack, R.

    1974-01-01

    A technical assessment of a program to develop photovoltaic power system technology for large-scale national energy applications was made by analyzing and judging the alternative candidate photovoltaic systems and development tasks. A program plan was constructed based on achieving the 10 year objective of a program to establish the practicability of large-scale terrestrial power installations using photovoltaic conversion arrays costing less than $0.50/peak W. Guidelines for the tasks of a 5 year program were derived from a set of 5 year objectives deduced from the 10 year objective. This report indicates the need for an early emphasis on the development of the single-crystal Si photovoltaic system for commercial utilization; a production goal of 5 x 10 to the 8th power peak W/year of $0.50 cells was projected for the year 1985. The developments of other photovoltaic conversion systems were assigned to longer range development roles. The status of the technology developments and the applicability of solar arrays in particular power installations, ranging from houses to central power plants, was scheduled to be verified in a series of demonstration projects. The budget recommended for the first 5 year phase of the program is $268.5M.

  3. Material property requirements for application leak-before-break technology on nuclear power plant high-energy piping

    International Nuclear Information System (INIS)

    Li Chengliang; Deng Xiaoyun; Yin Zhiying; Liu Meng

    2012-01-01

    The application of leak-before-break (LBB) technology on nuclear power plant high-energy piping systems can improve their safety and economy, while propose some new requirements on testing material properties. The U.S. Nuclear Regulatory Commission's LBB related standard review plan and implementation specifications were analyzed, and test items, object, temperature, quantity and thermal aging effect of five general requirements were summarized. In addition, four key testing technical requirements, such as specimen size, side grooves, strain range and the orientation of specimens were also discussed to ensure the test data usefulness, representativeness and integrity. This study can provide some guidance for the aforementioned test program on domestic materials. (authors)

  4. Deriving Requirements for Pervasive Well-Being Technology From Work Stress and Intervention Theory: Framework and Case Study.

    Science.gov (United States)

    Koldijk, Saskia; Kraaij, Wessel; Neerincx, Mark A

    2016-07-05

    Stress in office environments is a big concern, often leading to burn-out. New technologies are emerging, such as easily available sensors, contextual reasoning, and electronic coaching (e-coaching) apps. In the Smart Reasoning for Well-being at Home and at Work (SWELL) project, we explore the potential of using such new pervasive technologies to provide support for the self-management of well-being, with a focus on individuals' stress-coping. Ideally, these new pervasive systems should be grounded in existing work stress and intervention theory. However, there is a large diversity of theories and they hardly provide explicit directions for technology design. The aim of this paper is to present a comprehensive and concise framework that can be used to design pervasive technologies that support knowledge workers to decrease stress. Based on a literature study we identify concepts relevant to well-being at work and select different work stress models to find causes of work stress that can be addressed. From a technical perspective, we then describe how sensors can be used to infer stress and the context in which it appears, and use intervention theory to further specify interventions that can be provided by means of pervasive technology. The resulting general framework relates several relevant theories: we relate "engagement and burn-out" to "stress", and describe how relevant aspects can be quantified by means of sensors. We also outline underlying causes of work stress and how these can be addressed with interventions, in particular utilizing new technologies integrating behavioral change theory. Based upon this framework we were able to derive requirements for our case study, the pervasive SWELL system, and we implemented two prototypes. Small-scale user studies proved the value of the derived technology-supported interventions. The presented framework can be used to systematically develop theory-based technology-supported interventions to address work stress. In

  5. Native Hydrophobic Binding Interactions at the Transition State for Association between the TAZ1 Domain of CBP and the Disordered TAD-STAT2 Are Not a Requirement.

    Science.gov (United States)

    Lindström, Ida; Dogan, Jakob

    2017-08-15

    A significant fraction of the eukaryotic proteome consists of proteins that are either partially or completely disordered under native-like conditions. Intrinsically disordered proteins (IDPs) are common in protein-protein interactions and are involved in numerous cellular processes. Although many proteins have been identified as disordered, much less is known about the binding mechanisms of the coupled binding and folding reactions involving IDPs. Here we have analyzed the rate-limiting transition state for binding between the TAZ1 domain of CREB binding protein and the intrinsically disordered transactivation domain of STAT2 (TAD-STAT2) by site-directed mutagenesis and kinetic experiments (Φ-value analysis) and found that the native protein-protein binding interface is not formed at the transition state for binding. Instead, native hydrophobic binding interactions form late, after the rate-limiting barrier has been crossed. The association rate constant in the absence of electrostatic enhancement was determined to be rather high. This is consistent with the Φ-value analysis, which showed that there are few or no obligatory native contacts. Also, linear free energy relationships clearly demonstrate that native interactions are cooperatively formed, a scenario that has usually been observed for proteins that fold according to the so-called nucleation-condensation mechanism. Thus, native hydrophobic binding interactions at the rate-limiting transition state for association between TAD-STAT2 and TAZ1 are not a requirement, which is generally in agreement with previous findings on other IDP systems and might be a common mechanism for IDPs.

  6. Transition to a hydrogen fuel cell transit bus fleet for Canadian urban transit system

    International Nuclear Information System (INIS)

    Ducharme, P.

    2004-01-01

    'Full text:' The Canadian Transportation Fuel Cell Alliance (CTFCA), created by the Canadian Government as part of its 2000 Climate Change Action Plan, has commissioned MARCON-DDM's Hydrogen Intervention Team (HIT) to provide a roadmap for urban transit systems that wish to move to hydrogen fuel cell-powered bus fleets. HIT is currently in the process of gathering information from hydrogen technology providers, bus manufacturers, fuelling system providers and urban transit systems in Canada, the US and Europe. In September, HIT will be in a position to provide a preview of its report to the CTFCA, due for October 2004. The planned table of contents includes: TOMORROW'S FUEL CELL (FC) URBAN TRANSIT BUS - Powertrain, on-board fuel technologies - FC engine system manufacturers - Bus technical specifications, performances, operating characteristics - FC bus manufacturers TOMORROW'S FC TRANSIT PROPERTY - Added maintenance, facilities and fuelling infrastructure requirements - Supply chain implications - Environmental and safety issues - Alternative operational concepts PATHWAYS TO THE FUTURE - Choosing the future operational concept - 'Gap' assessment - how long from here to there? - Facilities and fleet adjustments, including fuelling infrastructure - Risk mitigation, code compliance measures TRANSITIONAL CONSIDERATIONS - Cost implications - Transition schedule (author)

  7. An Analysis of Database Replication Technologies with Regard to Deep Space Network Application Requirements

    Science.gov (United States)

    Connell, Andrea M.

    2011-01-01

    The Deep Space Network (DSN) has three communication facilities which handle telemetry, commands, and other data relating to spacecraft missions. The network requires these three sites to share data with each other and with the Jet Propulsion Laboratory for processing and distribution. Many database management systems have replication capabilities built in, which means that data updates made at one location will be automatically propagated to other locations. This project examines multiple replication solutions, looking for stability, automation, flexibility, performance, and cost. After comparing these features, Oracle Streams is chosen for closer analysis. Two Streams environments are configured - one with a Master/Slave architecture, in which a single server is the source for all data updates, and the second with a Multi-Master architecture, in which updates originating from any of the servers will be propagated to all of the others. These environments are tested for data type support, conflict resolution, performance, changes to the data structure, and behavior during and after network or server outages. Through this experimentation, it is determined which requirements of the DSN can be met by Oracle Streams and which cannot.

  8. IMPROVING TEACHING MATHEMATICS USING MODERN INFORMATION TECHNOLOGIES IN FORMATION MATHEMATICAL COMPETENCE REQUIRED FUTURE SKIPPERS.

    Directory of Open Access Journals (Sweden)

    Elena Gudyreva

    2015-10-01

    Full Text Available The article is devoted to consideration of issues related to identifying the potential for teaching mathematics using network (Internet technology and the introduction of elements of distance learning into educational process of higher educational establishments of the sea profile, as well as achievement of formation of mathematical competence of students of the University generally, and of the University's Maritime profile, in particular. Based on the analysis of psychological and pedagogical literature highlights the factors that influence the increase of efficiency of independent work of students of higher educational institutions and on the formation of steady skills of self-education that ultimately leads to quality of formation of mathematical competence of a student. Specific features of teaching mathematics at the University of the sea profile. The description of the project (complex sites "KSMA. Higher mathematics navigators", who developed and used in the Kherson state Maritime Academy in the teaching of mathematics and the organization of individual techniques of distance learning, shows the simplicity and accessibility of working with complex sites, as well as the simplicity and accessibility of design "personal website", but in fact complex sites, by a teacher of any discipline of higher education. Shown, also a training process with the use of the project "KSMA. Higher mathematics navigators", analyzes the experience of teaching the course "Higher mathematics" in a higher educational institution of the marine profile with the use of a personal website, a teacher and shown positive results in students mastery of basic mathematical competencies.

  9. Impact of dynamic certification requirements on the Nuclear Materials Technology Division's transuranic waste management program

    International Nuclear Information System (INIS)

    Balkey, J.J.; Montoya, A.J.; Wieneke, Ronald E.

    2002-01-01

    The issuance of the Waste Isolation Pilot Plant's (WIPP) Hazardous Waste Facility Permit in August of 2000, specifically the attachment I3 Waste Analysis Plan (WAP),had a profound impact upon transuranic (TRU) waste certification at Los Alamos National Laboratory's (LANL) Plutonium Facility. Program certification was lost until Laboratory internal program documents could be amended to meet the new WAP requirements, waste management personnel could be retrained to incorporate the changes into waste operations and the entire program successfully pass subsequent Carlsbad Field Ofice (CBFO) audit. This action resulted in the suspension of transuranic waste shipments from LANL to WIPP. In addition the changes unnecessarily increased the complexity of TRU waste program activities in waste handling.

  10. Scénarios de transition énergétique en ville. Acteurs, régulations, technologies (dir. Gilles Debizet)

    OpenAIRE

    Ferrieux, Cécile

    2016-01-01

    L’ouvrage « Scénarios de transition énergétique en ville. Acteurs, régulations, technologies » (dir. Gilles Debizet) cherche à comprendre comment s’opère concrètement la transition énergétique dans les villes, c'est-à-dire le passage d’un usage systématique des énergies carbonisées à l’usage plus fréquent, mais pas exclusif, des énergies renouvelables. Au-delà des grands mots d’ordre sur la baisse de la consommation des énergies fossiles et le développement de solutions à grande échelle, Gill...

  11. Preparation of safety regulatory requirements for new technology like digital system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    The current regulatory requirements on digital instrumentation and control system have been reviewed by JNES, considering international trend discussed in DICWG of MDEP. MDEP DICWG held in OECD/NEA gives the opportunity to identify the convergence of applicable standards. The working group's activities include: identifying and prioritising the member countries' challenges, practices, and needs regarding standards and regulatory guidance on digital instrumentation and control; identifying areas of importance and needs for convergence of existing standards and guidance or development of new standards; sharing of information; and identifying common positions among the member countries for areas of particular importance and need. The DICWG drafted common positions on specific issues which are based on the existing standards, national regulatory guidance, best practices, and group inputs using an agreed process and framework. The following four general common positions have been discussed in this fiscal year. The Treatment of Common Cause Failure Resulting from Software within Digital Safety Systems, The Treatment of Hardware Description Language(HDL) Programmed Devices for Use in Nuclear Safety System, Factory Acceptance Test and Site Acceptance Test, The Use of Automatic Tests to Perform Surveilance for Digital Systems. (author)

  12. Combined cycles, impacts of technological requirements; Ciclos combinados, impactos de requerimientos tecnologicos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Santalo, Jose Miguel [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    The fundamental growth of the Mexican electrical sector for the next ten years is planned on base of the installation of 20 thousand Mw plants of combined cycle. This article presents an analysis of the impact of these power stations finding out that the power stations of combined cycle are at the moment cheaper - from 600 to 700 dollars by installed kW- than the alternative coal options or fuel oil, that are in the range of 900 to 1200 dollars per kW, in addition to which the time required for their construction is shorter. [Spanish] El crecimiento fundamental del sector electrico mexicano para los proximos diez anos esta planeado con base en la instalacion de 20 mil Mw de plantas de ciclo combinado. Este articulo presenta un analisis del impacto de dichas centrales encontrando que las centrales de ciclo combinado actualmente resultan mas baratas - de 600 a 700 dolares por kW instalado - que las opciones alternativas de carbon o combustoleo que estan en el rango de 900 a 1200 dolares por kW, ademas de que los tiempos requeridos para su construccion son menores.

  13. Holistic approach for overlay and edge placement error to meet the 5nm technology node requirements

    Science.gov (United States)

    Mulkens, Jan; Slachter, Bram; Kubis, Michael; Tel, Wim; Hinnen, Paul; Maslow, Mark; Dillen, Harm; Ma, Eric; Chou, Kevin; Liu, Xuedong; Ren, Weiming; Hu, Xuerang; Wang, Fei; Liu, Kevin

    2018-03-01

    In this paper, we discuss the metrology methods and error budget that describe the edge placement error (EPE). EPE quantifies the pattern fidelity of a device structure made in a multi-patterning scheme. Here the pattern is the result of a sequence of lithography and etching steps, and consequently the contour of the final pattern contains error sources of the different process steps. EPE is computed by combining optical and ebeam metrology data. We show that high NA optical scatterometer can be used to densely measure in device CD and overlay errors. Large field e-beam system enables massive CD metrology which is used to characterize the local CD error. Local CD distribution needs to be characterized beyond 6 sigma, and requires high throughput e-beam system. We present in this paper the first images of a multi-beam e-beam inspection system. We discuss our holistic patterning optimization approach to understand and minimize the EPE of the final pattern. As a use case, we evaluated a 5-nm logic patterning process based on Self-Aligned-QuadruplePatterning (SAQP) using ArF lithography, combined with line cut exposures using EUV lithography.

  14. Preparation of safety regulatory requirements for new technology like digital system

    International Nuclear Information System (INIS)

    Ito, Juichiro; Takita, Masami

    2011-01-01

    The current regulatory requirements on digital instrumentation and control system have been reviewed by JNES, considering international trend discussed in DICWG (Digital Instrumentation and Control Working Group) of MDEP (Multinational Design Evaluation Program). MDEP DICWG held in OECD/NEA (Organisation for Economic Co-operation and Development/Nuclear Energy Agency) gives the opportunity to identify the convergence of applicable standards. The working group's activities include: identifying and prioritising the member countries' challenges, practices, and needs regarding standards and regulatory guidance regarding digital instrumentation and control; identifying areas of importance and needs for convergence of existing standards and guidance or development of new standards; sharing of information; and identifying common positions among the member countries for areas of particular importance and need. The DICWG drafted common positions on specific issues which are based on the existing standards, national regulatory guidance, best practices, and group inputs using an agreed upon process and framework. Five general common positions are under discussion in this fiscal year. Simplicity in Design, Software Common Cause Failures, Software Tools, Data communication, Verification and Validation throughout the life cycle of safety systems using digital computers. In addition, the technical evaluation of standards of the Japan Electric Association about digital system for safety was made to support NISA (Nuclear and Industrial Safety Agency). (author)

  15. Preparation of safety regulatory requirements for new technology like digital system

    International Nuclear Information System (INIS)

    2012-01-01

    The current regulatory requirements on digital instrumentation and control system have been reviewed by JNES, considering international trend discussed in DICWG of MDEP. MDEP DICWG held in OECD/NEA gives the opportunity to identify the convergence of applicable standards. The working group's activities include: identifying and prioritising the member countries' challenges, practices, and needs regarding standards and regulatory guidance on digital instrumentation and control; identifying areas of importance and needs for convergence of existing standards and guidance or development of new standards; sharing of information; and identifying common positions among the member countries for areas of particular importance and need. The DICWG drafted common positions on specific issues which are based on the existing standards, national regulatory guidance, best practices, and group inputs using an agreed process and framework. The following two general common positions are discussed and to be issued in this fiscal year. Verification and Validation throughout the life cycle of safety systems using digital computers. The Impact of Cyber Security Features on Digital I and C Safety Systems. (author)

  16. Transit operations decision support systems (TODSS) : core functional requirements for identification of service disruptions and provision of service restoration options 1.0

    Science.gov (United States)

    2004-03-15

    The Transit Operations Decision Support System (TODSS) Project was initiated to address concerns raised by transit agencies that have implemented and are using Automated Vehicle Location (AVL) and Computer Aided Dispatch Systems (CAD). This document ...

  17. Trajectory Orientation: A Technology-Enabled Concept Requiring a Shift in Controller Roles and Responsibilities

    Science.gov (United States)

    Leiden, Ken; Green, Steven

    2000-01-01

    The development of a decision support tool (DST) for the en-route domain with accurate conflict prediction time horizons of 20 minutes has introduced an interesting problem. A 20 minute time horizon for conflict prediction often results in the predicted conflict occurring one or more sectors downstream from the sector controller who "owns" (i-e., is responsible for the safe separation of aircraft) one or both of the aircraft in the conflict pair. Based on current roles and responsibilities of today's en route controllers, the upstream controller would not resolve this conflict. In most cases, the downstream controller would wait until the conflicting aircraft entered higher sector before resolving the conflict. This results in a delay of several minutes from the time when the conflict was initially predicted. This delay is inefficient from both a controller workload and user's cost of operations perspective. Trajectory orientation, a new concept for facilitating an efficient, conflict-free flight path across several sectors while conforming to metering or miles-in-trail spacing, is proposed as an alternative to today's sector-oriented method. This concept necessitates a fundamental shift in thinking about inter-sector coordination. Instead of operating independently, with the main focus on protecting their internal airspace, controllers would work cooperatively, depending on each other for well-planned, conflict-free flow of aircraft. To support the trajectory orientation concept, a long time horizon (15 to 20 minutes) for conflict prediction and resolution would most likely be a primary requirement. In addition, new tools, such as controller-pilot data link will be identified to determine their necessity and applicability for trajectory orientation. Finally, with significant controller participation from selected Air Route Traffic Control Centers, potential shifts in R-side/D-side roles and responsibilities as well as the creation of a new controller position for

  18. Building a transnational biosurveillance network using semantic web technologies: requirements, design, and preliminary evaluation.

    Science.gov (United States)

    Teodoro, Douglas; Pasche, Emilie; Gobeill, Julien; Emonet, Stéphane; Ruch, Patrick; Lovis, Christian

    2012-05-29

    Antimicrobial resistance has reached globally alarming levels and is becoming a major public health threat. Lack of efficacious antimicrobial resistance surveillance systems was identified as one of the causes of increasing resistance, due to the lag time between new resistances and alerts to care providers. Several initiatives to track drug resistance evolution have been developed. However, no effective real-time and source-independent antimicrobial resistance monitoring system is available publicly. To design and implement an architecture that can provide real-time and source-independent antimicrobial resistance monitoring to support transnational resistance surveillance. In particular, we investigated the use of a Semantic Web-based model to foster integration and interoperability of interinstitutional and cross-border microbiology laboratory databases. Following the agile software development methodology, we derived the main requirements needed for effective antimicrobial resistance monitoring, from which we proposed a decentralized monitoring architecture based on the Semantic Web stack. The architecture uses an ontology-driven approach to promote the integration of a network of sentinel hospitals or laboratories. Local databases are wrapped into semantic data repositories that automatically expose local computing-formalized laboratory information in the Web. A central source mediator, based on local reasoning, coordinates the access to the semantic end points. On the user side, a user-friendly Web interface provides access and graphical visualization to the integrated views. We designed and implemented the online Antimicrobial Resistance Trend Monitoring System (ARTEMIS) in a pilot network of seven European health care institutions sharing 70+ million triples of information about drug resistance and consumption. Evaluation of the computing performance of the mediator demonstrated that, on average, query response time was a few seconds (mean 4.3, SD 0.1 × 10

  19. Transitioning Design and Technology Education from Physical Classrooms to Virtual Spaces: Implications for Pre-Service Teacher Education

    Science.gov (United States)

    Best, Marnie; MacGregor, Denise

    2017-01-01

    Technology-mediated teaching and learning enables access to educational opportunities, irrespective of locality, ruruality or remoteness. The design, development and delivery of technology enhanced learning in pre-service teacher education programs is therefore gaining momentum, both in Australia and internationally. Much research regarding…

  20. A novel RNA-recognition-motif protein is required for premeiotic G1/S-phase transition in rice (Oryza sativa L..

    Directory of Open Access Journals (Sweden)

    Ken-Ichi Nonomura

    2011-01-01

    Full Text Available The molecular mechanism for meiotic entry remains largely elusive in flowering plants. Only Arabidopsis SWI1/DYAD and maize AM1, both of which are the coiled-coil protein, are known to be required for the initiation of plant meiosis. The mechanism underlying the synchrony of male meiosis, characteristic to flowering plants, has also been unclear in the plant kingdom. In other eukaryotes, RNA-recognition-motif (RRM proteins are known to play essential roles in germ-cell development and meiosis progression. Rice MEL2 protein discovered in this study shows partial similarity with human proline-rich RRM protein, deleted in Azoospermia-Associated Protein1 (DAZAP1, though MEL2 also possesses ankyrin repeats and a RING finger motif. Expression analyses of several cell-cycle markers revealed that, in mel2 mutant anthers, most germ cells failed to enter premeiotic S-phase and meiosis, and a part escaped from the defect and underwent meiosis with a significant delay or continued mitotic cycles. Immunofluorescent detection revealed that T7 peptide-tagged MEL2 localized at cytoplasmic perinuclear region of germ cells during premeiotic interphase in transgenic rice plants. This study is the first report of the plant RRM protein, which is required for regulating the premeiotic G1/S-phase transition of male and female germ cells and also establishing synchrony of male meiosis. This study will contribute to elucidation of similarities and diversities in reproduction system between plants and other species.

  1. Requirements of a new communication technology for handover and the escalation of patient care: a multi-stakeholder analysis.

    Science.gov (United States)

    Johnston, Maximilian J; King, Dominic; Arora, Sonal; Cooper, Kerri; Panda, Neha Aparajita; Gosling, Rebecca; Singh, Kaushiki; Sanders, Bradley; Cox, Benita; Darzi, Ara

    2014-08-01

    In order to enable safe and efficient information transfer between health care professionals during clinical handover and escalation of care, existing communication technologies must be updated. This study aimed to provide a user-informed guide for the development of an application-based communication system (ABCS), tailored for use in patient handover and escalation of care. Current methods of inter-professional communication in health care along with information system needs for communication technology were identified through literature review. A focus group study was then conducted according to a topic guide developed by health innovation and safety researchers. Fifteen doctors and 11 nurses from three London hospitals participated in a mixture of homogeneous and heterogeneous sessions. The sessions were recorded and transcribed verbatim before being subjected to thematic analysis. Seventeen information system needs were identified from the literature review. Participants identified six themes detailing user perceptions of current communication technology, attitudes to smartphone technology and anticipated requirements of an application produced for handover and escalation of care. Participants were in favour of an ABCS over current methods and expressed enthusiasm for a system with integrated patient information and group-messaging functions. Despite concerns regarding confidentiality and information governance a robust guide for development and implementation of an ABCS was produced, taking input from multiple stakeholders into account. Handover and escalation of care are vital processes for patient safety and communication within these must be optimized. An ABCS for health care professionals would be a welcome innovation and may lead to improvements in patient safety. © 2014 John Wiley & Sons, Ltd.

  2. The Survey of the Knowledge and Skills Required for Transition Teachers in High School Divisions of Special Needs Education with Intellectual Disabilities : Based on the opinions of transition teachers in high school divisions of special needs education with intellectual disabilities

    OpenAIRE

    Fujii, Asuka; Ochiai, Toshiro

    2011-01-01

    The purpose of this study is to investigate the opinions that transition teachers in upper second education division of special school which are requested to themselves on the knowledge and skills needed for transition from school to work. The questionnaires were sent to 574 upper second education divisions of special schools. As the result of statistic analyze, the four domains about the knowledge and skills needed for transition. They were "Needs Assessment", "Coordination" "Job-Coaching" a...

  3. A Pilot Health Information Technology-Based Effort to Increase the Quality of Transitions From Skilled Nursing Facility to Home: Compelling Evidence of High Rate of Adverse Outcomes.

    Science.gov (United States)

    Donovan, Jennifer L; Kanaan, Abir O; Gurwitz, Jerry H; Tjia, Jennifer; Cutrona, Sarah L; Garber, Lawrence; Preusse, Peggy; Field, Terry S

    2016-04-01

    Older adults are often transferred from hospitals to skilled nursing facilities (SNFs) for post-acute care. Patients may be at risk for adverse outcomes after SNF discharges, but little research has focused on this period. Assessment of the feasibility of a transitional care intervention based on a combination of manual information transmission and health information technology to provide automated alert messages to primary care physicians and staff; pre-post analysis to assess potential impact. A multispecialty group practice. Adults aged 65 and older, discharged from SNFs to home; comparison group drawn from SNF discharges during the previous 1.5 years, matched on facility, patient age, and sex. For the pre-post analysis, we tracked rehospitalization within 30 days after discharge and adverse drug events within 45 days. The intervention was developed and implemented with manual transmission of information between 8 SNFs and the group practice followed by entry into the electronic health record. The process required a 5-day delay during which a large portion of the adverse events occurred. Over a 1-year period, automated alert messages were delivered to physicians and staff for the 313 eligible patients discharged from the 8 SNFs to home. We compared outcomes to those of individually matched discharges from the previous 1.5 years and found similar percentages with 30-day rehospitalizations (31% vs 30%, adjusted HR 1.06, 95% CI 0.80-1.4). Within the adverse drug event (ADE) study, 30% of the discharges during the intervention period and 30% of matched discharges had ADEs within 45 days. Older adults discharged from SNFs are at high risk of adverse outcomes immediately following discharge. Simply providing alerts to outpatient physicians, especially if delivered multiple days after discharge, is unlikely to have any impact on reducing these rates. Copyright © 2016 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All

  4. Exploring Transition of Large Technological Systems through Relational Data - A Study of The Danish Smart Grid Development

    DEFF Research Database (Denmark)

    Jurowetzki, Roman

    2016-01-01

    in the transformation process. While they can contribute with resources, capabilities, and their connections to the development of the new grid infrastructure, they may also impede innovation given their ownership of and assumed interest in the established system. These insights should be considered in policy...... transformation of the energy grid infrastructure. The focus is set on how the interplay between established and new technologies and actors determines the direction and outcomes of innovation in large technological systems (such as the Danish smart grid). Results of several chapters indicate that in the Danish......Combining elements form the Science, Technology and Society (STS) tradition with the Technological Innovation System (TIS) framework and utilising unstructured and relational data as well as novel analysis tools, this thesis explores the development of the Danish smart grid and the associated...

  5. The Uluzzian technology of Grotta di Fumane and its implication for reconstructing cultural dynamics in the Middle-Upper Palaeolithic transition of Western Eurasia.

    Science.gov (United States)

    Peresani, Marco; Cristiani, Emanuela; Romandini, Matteo

    2016-02-01

    From the intricate ensemble of evidence related to the Middle-Upper Palaeolithic transition and the presumed first spread of anatomically modern humans in Europe, the Uluzzian has attracted major attention in the past few years. Although the Uluzzian has been viewed as a supposed product of modern humans settling in Mediterranean Europe, the techno-cultural complex has been the subject of few investigations aiming to clarify its chronology, bone industry, and settlement dynamics. Further, little is known of its technological structure. This article presents the results of an extensive study of the lithic and bone technologies from assemblages recovered at Fumane Cave in the north of Italy. Results confirm that the Uluzzian is a flake-dominated industry that brings together a set of technological innovations. The Levallois is the most used method in the initial phase, which is replaced by more varied flaking procedures and an increase in bladelets and flake-blades. Sidescrapers and points also represent a Mousterian feature in the initial phase, while splintered pieces, backed knives and other Upper Palaeolithic tools increase in the later phase. Our results suggest that the Uluzzian is rooted in the Mousterian lithic technological context and cannot be viewed as a proxy for anatomically modern humans, the carriers of the abrupt cultural changes related to the Aurignacian. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 2, appendix A: Selected DSG technologies and their general control requirements

    Science.gov (United States)

    1980-01-01

    A consistent approach was sought for both hardware and software which will handle the monitoring and control necessary to integrate a number of different DSG technologies into a common distribution dispatch network. It appears that the control of each of the DSG technologies is compatible with a supervisory control method of operation that lends itself to remote control from a distribution dispatch center.

  7. The role of hospice in the transition from hospital to home for technology-dependent children-A qualitative study.

    Science.gov (United States)

    Price, Jayne; McCloskey, Sharon; Brazil, Kevin

    2018-01-01

    To report parent and professional perspectives of step-down care in assisting the transition from hospital to home, within one children's hospice in a constituent country of the United Kingdom. In recent years, increasing numbers of children-dependent on long term assisted ventilation have been noted. Meeting the complex physical, emotional and social needs of the child and family is challenging. Many of these children spend extended periods in hospital even when medically stable. This was a qualitative study using an inductive, semantic analytic approach within a realist epistemology. Data collection was carried out in 2013. Interviews took place with parents (n = 5) and focus groups with professionals (n = 26) who had experience of step-down care. Multiple benefits of step-down in the hospice were clear. Both sets of accounts suggested that for children and families life was "on hold" in hospital. Hospice was considered a home-like environment where the child and family could "live again". Parents reflected that, in hospice they were "living, not existing" while professionals highlighted hospice as nurturing and empowering the whole family, promoting the child's development while safely meeting their clinical needs. The study highlights a number of crucial benefits to the child and family both in the immediate and longer terms. The collective perspectives therefore endorse hospice as a potential viable choice for these children and their families during the always difficult, usually protracted transition from hospital to home. © 2017 John Wiley & Sons Ltd.

  8. A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets

    Energy Technology Data Exchange (ETDEWEB)

    Weller, G.H.

    2001-07-15

    Utility load management programs--including direct load control and interruptible load programs--were employed by utilities in the past as system reliability resources. With electricity industry restructuring, the context for these programs has changed; the market that was once controlled by vertically integrated utilities has become competitive, raising the question: can existing load management programs be modified so that they can effectively participate in competitive energy markets? In the short run, modified and/or improved operation of load management programs may be the most effective form of demand-side response available to the electricity system today. However, in light of recent technological advances in metering, communication, and load control, utility load management programs must be carefully reviewed in order to determine appropriate investments to support this transition. This report investigates the feasibility of and options for modifying an existing utility load management system so that it might provide reliability services (i.e. ancillary services) in the competitive markets that have resulted from electricity industry restructuring. The report is a case study of Southern California Edison's (SCE) load management programs. SCE was chosen because it operates one of the largest load management programs in the country and it operates them within a competitive wholesale electricity market. The report describes a wide range of existing and soon-to-be-available communication, control, and metering technologies that could be used to facilitate the evolution of SCE's load management programs and systems to provision of reliability services. The fundamental finding of this report is that, with modifications, SCE's load management infrastructure could be transitioned to provide critical ancillary services in competitive electricity markets, employing currently or soon-to-be available load control technologies.

  9. Vertical flight training: An overview of training and flight simulator technology with emphasis on rotary-wing requirements

    Science.gov (United States)

    Alderete, Thomas S.; Ascencio-Lee, Carmen E.; Bray, Richard; Carlton, John; Dohme, Jack; Eshow, Michelle M.; Francis, Stephen; Lee, Owen M.; Lintern, Gavan; Lombardo, David A.

    1994-01-01

    The principal purpose of this publication is to provide a broad overview of the technology that is relevant to the design of aviation training systems and of the techniques applicable to the development, use, and evaluation of those systems. The issues addressed in our 11 chapters are, for the most part, those that would be expected to surface in any informed discussion of the major characterizing elements of aviation training systems. Indeed, many of the same facets of vertical-flight training discussed were recognized and, to some extent, dealt with at the 1991 NASA/FAA Helicopter Simulator Workshop. These generic topics are essential to a sound understanding of training and training systems, and they quite properly form the basis of any attempt to systematize the development and evaluation of more effective, more efficient, more productive, and more economical approaches to aircrew training. Individual chapters address the following topics: an overview of the vertical flight industry: the source of training requirements; training and training schools: meeting current requirements; training systems design and development; transfer of training and cost-effectiveness; the military quest for flight training effectiveness; alternative training systems; training device manufacturing; simulator aero model implementation; simulation validation in the frequency domain; cockpit motion in helicopter simulation; and visual space perception in flight simulators.

  10. Demonstration of New Technologies Required for the Treatment of Mixed Waste Contaminated with {ge}260 ppm Mercury

    Energy Technology Data Exchange (ETDEWEB)

    Morris, M.I.

    2002-02-06

    The Resource Conservation and Recovery Act (RCRA) defines several categories of mercury wastes, each of which has a defined technology or concentration-based treatment standard, or universal treatment standard (UTS). RCRA defines mercury hazardous wastes as any waste that has a TCLP value for mercury of 0.2 mg/L or greater. Three of these categories, all nonwastewaters, fall within the scope of this report on new technologies to treat mercury-contaminated wastes: wastes as elemental mercury; hazardous wastes with less than 260 mg/kg [parts per million (ppm)] mercury; and hazardous wastes with 260 ppm or more of mercury. While this report deals specifically with the last category--hazardous wastes with 260 ppm or more of mercury--the other two categories will be discussed briefly so that the full range of mercury treatment challenges can be understood. The treatment methods for these three categories are as follows: Waste as elemental mercury--RCRA identifies amalgamation (AMLGM) as the treatment standard for radioactive elemental mercury. However, radioactive mercury condensates from retorting (RMERC) processes also require amalgamation. In addition, incineration (IMERC) and RMERC processes that produce residues with >260 ppm of radioactive mercury contamination and that fail the RCRA toxicity characteristic leaching procedure (TCLP) limit for mercury (0.20 mg/L) require RMERC, followed by AMLGM of the condensate. Waste with <260 ppm mercury--No specific treatment method is specified for hazardous wastes containing <260 ppm. However, RCRA regulations require that such wastes (other than RMERC residues) that exceed a TCLP mercury concentration of 0.20 mg/L be treated by a suitable method to meet the TCLP limit for mercury of 0.025 mg/L. RMERC residues must meet the TCLP value of {ge}0.20 mg/L, or be stabilized and meet the {ge}0.025 mg/L limit. Waste with {ge}260 ppm mercury--For hazardous wastes with mercury contaminant concentrations {ge}260 ppm and RCRA

  11. Endangered Literacies? Affordances of Paper-Based Literacy in Medical Practice and Its Persistence in the Transition to Digital Technology

    Science.gov (United States)

    Sterponi, Laura; Zucchermaglio, Cristina; Alby, Francesca; Fatigante, Marilena

    2017-01-01

    Under the rapid advances of digital technology, traditional paper-based forms of reading and writing are steadily giving way to digital-based literacies, in theory as well as in application. Drawing on a study of literacy in a medical workplace context, this article examines critically the shift toward computer-mediated textual practices. While a…

  12. Meeting report: Ocean ‘omics science, technology and cyberinfrastructure: current challenges and future requirements (August 20-23, 2013)

    Science.gov (United States)

    Gilbert, Jack A; Dick, Gregory J.; Jenkins, Bethany; Heidelberg, John; Allen, Eric; Mackey, Katherine R. M.

    2014-01-01

    The National Science Foundation’s EarthCube End User Workshop was held at USC Wrigley Marine Science Center on Catalina Island, California in August 2013. The workshop was designed to explore and characterize the needs and tools available to the community that is focusing on microbial and physical oceanography research with a particular emphasis on ‘omic research. The assembled researchers outlined the existing concerns regarding the vast data resources that are being generated, and how we will deal with these resources as their volume and diversity increases. Particular attention was focused on the tools for handling and analyzing the existing data, on the need for the construction and curation of diverse federated databases, as well as development of shared, interoperable, “big-data capable” analytical tools. The key outputs from this workshop include (i) critical scientific challenges and cyber infrastructure constraints, (ii) the current and future ocean ‘omics science grand challenges and questions, and (iii) data management, analytical and associated and cyber-infrastructure capabilities required to meet critical current and future scientific challenges. The main thrust of the meeting and the outcome of this report is a definition of the ‘omics tools, technologies and infrastructures that facilitate continued advance in ocean science biology, marine biogeochemistry, and biological oceanography. PMID:25197495

  13. Meeting report: Ocean 'omics science, technology and cyberinfrastructure: current challenges and future requirements (August 20-23, 2013).

    Science.gov (United States)

    Gilbert, Jack A; Dick, Gregory J; Jenkins, Bethany; Heidelberg, John; Allen, Eric; Mackey, Katherine R M; DeLong, Edward F

    2014-06-15

    The National Science Foundation's EarthCube End User Workshop was held at USC Wrigley Marine Science Center on Catalina Island, California in August 2013. The workshop was designed to explore and characterize the needs and tools available to the community that is focusing on microbial and physical oceanography research with a particular emphasis on 'omic research. The assembled researchers outlined the existing concerns regarding the vast data resources that are being generated, and how we will deal with these resources as their volume and diversity increases. Particular attention was focused on the tools for handling and analyzing the existing data, on the need for the construction and curation of diverse federated databases, as well as development of shared, interoperable, "big-data capable" analytical tools. The key outputs from this workshop include (i) critical scientific challenges and cyber infrastructure constraints, (ii) the current and future ocean 'omics science grand challenges and questions, and (iii) data management, analytical and associated and cyber-infrastructure capabilities required to meet critical current and future scientific challenges. The main thrust of the meeting and the outcome of this report is a definition of the 'omics tools, technologies and infrastructures that facilitate continued advance in ocean science biology, marine biogeochemistry, and biological oceanography.

  14. Transition from glass to graphite in manufacture of composite aircraft structure

    Science.gov (United States)

    Buffum, H. E.; Thompson, V. S.

    1978-01-01

    The transition from fiberglass reinforced plastic composites to graphite reinforced plastic composites is described. Structural fiberglass design and manufacturing background are summarized. How this experience provides a technology base for moving into graphite composite secondary structure and then to composite primary structure is considered. The technical requirements that must be fulfilled in the transition from glass to graphite composite structure are also included.

  15. Transition management as a model for managing processes of co-evolution towards sustainable development

    NARCIS (Netherlands)

    R. Kemp (René); D.A. Loorbach (Derk); J. Rotmans (Jan)

    2007-01-01

    textabstractSustainable development requires changes in socio-technical systems and wider societal change - in beliefs, values and governance that co-evolve with technology changes. In this article we present a practical model for managing processes of co-evolution: transition management. Transition

  16. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  17. The Smart Home for the Elderly: Perceptions, Technologies and Psychological Accessibilities : The Requirements Analysis for the Elderly in Thailand

    OpenAIRE

    Visutsak , Porawat; DAOUDI , Mohamed

    2017-01-01

    International audience; Various studies of assistive technology, embedded into the house for helping elderly persons have been introduced. There are many terms used to call this assistive technology, such as smart home, intelligent home, and home networking. The current technologies for smart home system can be divided into two basic categories: passive-intervention devices and active-intervention devices. Passive-intervention devices monitor an elderly person's condition and safety without i...

  18. VHA mental health information system: applying health information technology to monitor and facilitate implementation of VHA Uniform Mental Health Services Handbook requirements.

    Science.gov (United States)

    Trafton, Jodie A; Greenberg, Greg; Harris, Alex H S; Tavakoli, Sara; Kearney, Lisa; McCarthy, John; Blow, Fredric; Hoff, Rani; Schohn, Mary

    2013-03-01

    To describe the design and deployment of health information technology to support implementation of mental health services policy requirements in the Veterans Health Administration (VHA). Using administrative and self-report survey data, we developed and fielded metrics regarding implementation of the requirements delineated in the VHA Uniform Mental Health Services Handbook. Finalized metrics were incorporated into 2 external facilitation-based quality improvement programs led by the VHA Mental Health Operations. To support these programs, tailored site-specific reports were generated. Metric development required close collaboration between program evaluators, policy makers and clinical leadership, and consideration of policy language and intent. Electronic reports supporting different purposes required distinct formatting and presentation features, despite their having similar general goals and using the same metrics. Health information technology can facilitate mental health policy implementation but must be integrated into a process of consensus building and close collaboration with policy makers, evaluators, and practitioners.

  19. Cultural dynamics of new renewable energy technologies. Comfort, mobility, growth, efficiency - conceptual frames or blinders for disciplinary engagements in transition processes?

    Energy Technology Data Exchange (ETDEWEB)

    Joergensen, Ulrik

    2010-07-01

    Full text: In the literature on transitions to a low carbon or sustainable society consumer preferences and fundamental economic mechanisms are very often seen as serious obstacles to sustainable solutions. These obstacles are supported by specific and rather basic notions derived from the discipline based approaches taken in research but also in public and political discourse emphasising certain phenomenon as e.g. consumers striving for improved comfort, citizens identifying mobility with freedom, societal economies building on a growth paradigm, and industrial processes focusing on cost reductions and efficiency. The paper will survey four notions and corresponding theoretical concepts: comfort, mobility, growth, and efficiency highlighting their specific contexts within scientific discipline and philosophical envisioning. Their historic contingency will be highlighted as well as how they have been part of socio-technical visions related to some specific epochs in societal development. While some scientific disciplines and political discourses take for granted such historic projections and help reproduce them as difficult to reject or neglect, the paper's idea is to open for a demystification and deconstruction of these core concepts by identifying their specific historic relations and emergence and relations to new socio-technical regimes. Examples of new technologies are challenged by these established regimes and are forced to produce visions of a changing society to sustain their appearance and performance hereby either aligning with or bringing in alternatives to transition processes. All four concepts have been assigned a rather fundamental role in the formation of a post-war consumer society based on a well-fare model of society where consumption was created as the core engine of development and transformation of societal institutions. While such models and conceptual framing of society and its institutions are not easily transformed and will survive

  20. Transition to Accrual Accounting in the Public Sector of Developed and Developing Countries : Problems and Requirements. With Special Focus on the Netherlands and Egypt

    NARCIS (Netherlands)

    Ouda, H.A.G.

    2005-01-01

    The purpose of this study is to develop a better understanding of the way in which accrual accounting can successfully be adopted in the public sector as well as to attain the target benefits of that adoption. This study investigates both theoretically and empirically the transition problems that

  1. Co-evolution of technology and society: The multi-level perspective and a case study, the transition in water supply and personal hygiene in the Netherlands (1850-1930)

    NARCIS (Netherlands)

    Geels, F.W.

    2005-01-01

    This article deals with the systems level in Freeman and Perez's innovation typology (incremental, radical, system, techno-economic paradigm). Transitions at this level are understood as changes from one socio-technical system to another, involving co-evolution of technology and society. To

  2. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  3. Recombinant Innovation and Endogenous Transitions

    OpenAIRE

    Koen Frenken; Luis R. Izquierdo; Paolo Zeppini

    2012-01-01

    We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create “short-cuts” which reduce switching costs allowing agents to escape a technological lock-in. As a result, recombinant innovations speed up technological progress allowing transitions that are impossible with only branching ...

  4. Personal radiation detector at a high technology readiness level that satisfies DARPA’s SN-13-47 and SIGMA program requirements

    International Nuclear Information System (INIS)

    Ginzburg, D.; Knafo, Y.; Manor, A.; Seif, R.; Ghelman, M.; Ellenbogen, M.; Pushkarsky, V.; Ifergan, Y.; Semyonov, N.; Wengrowicz, U.; Mazor, T.; Kadmon, Y.; Cohen, Y.; Osovizky, A.

    2015-01-01

    There is a need to develop new personal radiation detector (PRD) technologies that can be mass produced. On August 2013, DARPA released a request for information (RFI) seeking innovative radiation detection technologies. In addition, on December 2013, a Broad Agency Announcement (BAA) for the SIGMA program was released. The RFI requirements focused on a sensor that should possess three main properties: low cost, high compactness and radioisotope identification capabilities. The identification performances should facilitate the detection of a hidden threat, ranging from special nuclear materials (SNM) to commonly used radiological sources. Subsequently, the BAA presented the specific requirements at an instrument level and provided a comparison between the current market status (state-of-the-art) and the SIGMA program objectives. This work presents an optional alternative for both the detection technology (sensor with communication output and without user interface) for DARPA’s initial RFI and for the PRD required by the SIGMA program. A broad discussion is dedicated to the method proposed to fulfill the program objectives and to the selected alternative that is based on the PDS-GO design and technology. The PDS-GO is the first commercially available PRD that is based on a scintillation crystal optically coupled with a silicon photomultiplier (SiPM), a solid-state light sensor. This work presents the current performance of the instrument and possible future upgrades based on recent technological improvements in the SiPM design. The approach of utilizing the SiPM with a commonly available CsI(Tl) crystal is the key for achieving the program objectives. This approach provides the appropriate performance, low cost, mass production and small dimensions; however, it requires a creative approach to overcome the obstacles of the solid-state detector dark current (noise) and gain stabilization over a wide temperature range. Based on the presented results, we presume that

  5. Personal radiation detector at a high technology readiness level that satisfies DARPA’s SN-13-47 and SIGMA program requirements

    Energy Technology Data Exchange (ETDEWEB)

    Ginzburg, D., E-mail: dimgiz@rotemi.co.il [Radiation Detection Department, Rotem Industries Ltd. (Israel); Knafo, Y.; Manor, A. [Radiation Detection Department, Rotem Industries Ltd. (Israel); Seif, R.; Ghelman, M. [Electronics & Control Laboratories, Nuclear Research Center, Negev, Beersheba (Israel); Ellenbogen, M.; Pushkarsky, V. [Radiation Detection Department, Rotem Industries Ltd. (Israel); Ifergan, Y. [Electronics & Control Laboratories, Nuclear Research Center, Negev, Beersheba (Israel); Semyonov, N. [Radiation Detection Department, Rotem Industries Ltd. (Israel); Wengrowicz, U.; Mazor, T.; Kadmon, Y.; Cohen, Y. [Electronics & Control Laboratories, Nuclear Research Center, Negev, Beersheba (Israel); Osovizky, A. [Radiation Detection Department, Rotem Industries Ltd. (Israel)

    2015-06-01

    There is a need to develop new personal radiation detector (PRD) technologies that can be mass produced. On August 2013, DARPA released a request for information (RFI) seeking innovative radiation detection technologies. In addition, on December 2013, a Broad Agency Announcement (BAA) for the SIGMA program was released. The RFI requirements focused on a sensor that should possess three main properties: low cost, high compactness and radioisotope identification capabilities. The identification performances should facilitate the detection of a hidden threat, ranging from special nuclear materials (SNM) to commonly used radiological sources. Subsequently, the BAA presented the specific requirements at an instrument level and provided a comparison between the current market status (state-of-the-art) and the SIGMA program objectives. This work presents an optional alternative for both the detection technology (sensor with communication output and without user interface) for DARPA’s initial RFI and for the PRD required by the SIGMA program. A broad discussion is dedicated to the method proposed to fulfill the program objectives and to the selected alternative that is based on the PDS-GO design and technology. The PDS-GO is the first commercially available PRD that is based on a scintillation crystal optically coupled with a silicon photomultiplier (SiPM), a solid-state light sensor. This work presents the current performance of the instrument and possible future upgrades based on recent technological improvements in the SiPM design. The approach of utilizing the SiPM with a commonly available CsI(Tl) crystal is the key for achieving the program objectives. This approach provides the appropriate performance, low cost, mass production and small dimensions; however, it requires a creative approach to overcome the obstacles of the solid-state detector dark current (noise) and gain stabilization over a wide temperature range. Based on the presented results, we presume that

  6. Quantum phase transitions

    International Nuclear Information System (INIS)

    Sachdev, S.

    1999-01-01

    Phase transitions are normally associated with changes of temperature but a new type of transition - caused by quantum fluctuations near absolute zero - is possible, and can tell us more about the properties of a wide range of systems in condensed-matter physics. Nature abounds with phase transitions. The boiling and freezing of water are everyday examples of phase transitions, as are more exotic processes such as superconductivity and superfluidity. The universe itself is thought to have passed through several phase transitions as the high-temperature plasma formed by the big bang cooled to form the world as we know it today. Phase transitions are traditionally classified as first or second order. In first-order transitions the two phases co-exist at the transition temperature - e.g. ice and water at 0 deg., or water and steam at 100 deg. In second-order transitions the two phases do not co-exist. In the last decade, attention has focused on phase transitions that are qualitatively different from the examples noted above: these are quantum phase transitions and they occur only at the absolute zero of temperature. The transition takes place at the ''quantum critical'' value of some other parameter such as pressure, composition or magnetic field strength. A quantum phase transition takes place when co-operative ordering of the system disappears, but this loss of order is driven solely by the quantum fluctuations demanded by Heisenberg's uncertainty principle. The physical properties of these quantum fluctuations are quite distinct from those of the thermal fluctuations responsible for traditional, finite-temperature phase transitions. In particular, the quantum system is described by a complex-valued wavefunction, and the dynamics of its phase near the quantum critical point requires novel theories that have no analogue in the traditional framework of phase transitions. In this article the author describes the history of quantum phase transitions. (UK)

  7. Technology Professional Developer Conceptions and Misconceptions of Knowledge Required for the Educational Technology Specialist Certification, and Their Use of the Elements of Effective Professional Development

    Science.gov (United States)

    Marr, John P.

    2011-01-01

    Professional development has been a focus of public education since World War II, yet, it was not until the passage of the Goals 2000: Educate America Act in 1994 that professional development became federally mandated. The infusion of educational technology at the start of Goals 2000 created a natural connection with professional development. In…

  8. Evolutionary modelling of transitions to sustainable development

    International Nuclear Information System (INIS)

    Safarzynska, K.

    2010-01-01

    This thesis has examined how evolutionary economics can contribute to modelling the micromechanisms that underlie transitions towards sustainable development. In general, transitions are fundamental or structural system changes. They involve, or even require, escaping lock-in of dominant, environmentally unsustainable technologies, introducing major technical or social innovations, and changing prevailing social practices and structures. Due to the complexity of socioeconomic interactions, it is not always possible to identify, and thus target with appropriate policy instruments, causes of specific unsustainable patterns of behaviour. Formal modelling exercises can help improve our understanding of the interaction of various transition mechanisms which are otherwise difficult to grasp intuitively. They allow exploring effects of policy interventions in complex systems. However, existing models of transitions focus on social phenomena and seldom address economic problems. As opposed, mainstream (neoclassical) economic models of technological change do not account for social interactions, and changing heterogeneity of users and their perspectives - even though all of these can influence the direction of innovations and patterns of socio-technological development. Evolutionary economics offers an approach that goes beyond neoclassical economics - in the sense of employing more realistic assumptions regarding the behaviour and heterogeneity of consumers, firms and investors. It can complement current transition models by providing them with a better understanding of associated economic dynamics. In this thesis, formal models were proposed to illustrate the usefulness of a range of evolutionary-economic techniques for modelling transitions. Modelling exercises aimed to explain the core properties of socio-economic systems, such as lock-in, path-dependence, coevolution, group selection and recombinant innovation. The studies collected in this dissertation illustrate that

  9. An assessment method for system innovation and transition (AMSIT)

    NARCIS (Netherlands)

    Bos, Marc W.; Hofman, Erwin; Kuhlmann, Stefan

    2016-01-01

    To address comprehensive system innovations that may occur in a future transition, a suitable ex ante assessment method is required. The technological innovation system approach is useful for the retrospective study of the conditions for success or failure of innovation trajectories, and the

  10. Investigations into the application of a combination of bioventing and biotrickling filter technologies for soil decontamination processes--a transition regime between bioventing and soil vapour extraction.

    Science.gov (United States)

    Magalhães, S M C; Ferreira Jorge, R M; Castro, P M L

    2009-10-30

    Bioventing has emerged as one of the most cost-effective in situ technologies available to address petroleum light-hydrocarbon spills, one of the most common sources of soil pollution. However, the major drawback associated with this technology is the extended treatment time often required. The present study aimed to illustrate how an intended air-injection bioventing technology can be transformed into a soil vapour extraction effort when the air flow rates are pushed to a stripping mode, thus leading to the treatment of the off-gas resulting from volatilisation. As such, a combination of an air-injection bioventing system and a biotrickling filter was applied for the treatment of contaminated soil, the latter aiming at the treatment of the emissions resulting from the bioventing process. With a moisture content of 10%, soil contaminated with toluene at two different concentrations, namely 2 and 14 mg g soil(-1), were treated successfully using an air-injection bioventing system at a constant air flow rate of ca. 0.13 dm(3) min(-1), which led to the removal of ca. 99% toluene, after a period of ca. 5 days of treatment. A biotrickling filter was simultaneously used to treat the outlet gas emissions, which presented average removal efficiencies of ca. 86%. The proposed combination of biotechnologies proved to be an efficient solution for the decontamination process, when an excessive air flow rate was applied, reducing both the soil contamination and the outlet gas emissions, whilst being able to reduce the treatment time required by bioventing only.

  11. Provision of a draft version for standard classification structure for information of radiation technologies through analyzing their information and derivation of its applicable requirements to the information system

    International Nuclear Information System (INIS)

    Jang, Sol Ah; Kim, Joo Yeon; Yoo, Ji Yup; Shin, Woo Ho; Park, Tai Jin; Song, Myung Jae

    2015-01-01

    Radiation technology is the one for developing new products or processes by applying radiation or for creating new functions in industry, research and medical fields, and its application is increasing consistently. For securing an advanced technology competitiveness, it is required to create a new added value by information consumer through providing an efficient system for supporting information, which is the infrastructure for research and development, contributed to its collection, analysis and use with a rapidity and structure in addition to some direct research and development. Provision of the management structure for information resources is especially crucial for efficient operating the system for supporting information in radiation technology, and then a standard classification structure of information must be first developed as the system for supporting information will be constructed. The standard classification structure has been analyzed by reviewing the definition of information resources in radiation technology, and those classification structures in similar systems operated by institute in radiation and other scientific fields. And, a draft version of the standard classification structure has been then provided as 7 large, 25 medium and 71 small classifications, respectively. The standard classification structure in radiation technology will be developed in 2015 through reviewing this draft version and experts' opinion. Finally, developed classification structure will be applied to the system for supporting information by considering the plan for constructing this system and database, and requirements for designing the system. Furthermore, this structure will be designed in the system for searching information by working to the individual need of information consumers

  12. Provision of a draft version for standard classification structure for information of radiation technologies through analyzing their information and derivation of its applicable requirements to the information system

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Sol Ah; Kim, Joo Yeon; Yoo, Ji Yup; Shin, Woo Ho; Park, Tai Jin; Song, Myung Jae [Korean Association for Radiation Application, Seoul (Korea, Republic of)

    2015-02-15

    Radiation technology is the one for developing new products or processes by applying radiation or for creating new functions in industry, research and medical fields, and its application is increasing consistently. For securing an advanced technology competitiveness, it is required to create a new added value by information consumer through providing an efficient system for supporting information, which is the infrastructure for research and development, contributed to its collection, analysis and use with a rapidity and structure in addition to some direct research and development. Provision of the management structure for information resources is especially crucial for efficient operating the system for supporting information in radiation technology, and then a standard classification structure of information must be first developed as the system for supporting information will be constructed. The standard classification structure has been analyzed by reviewing the definition of information resources in radiation technology, and those classification structures in similar systems operated by institute in radiation and other scientific fields. And, a draft version of the standard classification structure has been then provided as 7 large, 25 medium and 71 small classifications, respectively. The standard classification structure in radiation technology will be developed in 2015 through reviewing this draft version and experts' opinion. Finally, developed classification structure will be applied to the system for supporting information by considering the plan for constructing this system and database, and requirements for designing the system. Furthermore, this structure will be designed in the system for searching information by working to the individual need of information consumers.

  13. Industry evolution, rational agents and the transition to sustainable electricity production

    NARCIS (Netherlands)

    Safarzynska, K.E.; van den Bergh, J.C.J.M.

    2011-01-01

    Guiding a transition to low carbon electricity requires a good understanding of the substitution of old by new technologies in the electricity industry. With the aim of explaining historical change from coal to gas in the British electricity industry, we develop a formal model of technological

  14. Transitional Justice

    DEFF Research Database (Denmark)

    Gissel, Line Engbo

    This presentation builds on an earlier published article, 'Contemporary Transitional Justice: Normalising a Politics of Exception'. It argues that the field of transitional justice has undergone a shift in conceptualisation and hence practice. Transitional justice is presently understood to be th...... to be the provision of ordinary criminal justice in contexts of exceptional political transition.......This presentation builds on an earlier published article, 'Contemporary Transitional Justice: Normalising a Politics of Exception'. It argues that the field of transitional justice has undergone a shift in conceptualisation and hence practice. Transitional justice is presently understood...

  15. OTTER: An Optimized Transit Tool And Easy Reference

    Science.gov (United States)

    2016-03-01

    TRANSIT TOOL AND EASY REFERENCE Warren Korban Blackburn Lieutenant Commander, United States Navy B.A., Thomas Edison State College, 2003...B.S.A.S.T., Thomas Edison State College, 2004 Submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN...application. Each of these technologies adds to the efficiency of the fleet. As RADM Thomas Eccles said, “No single technology will enable the Navy to

  16. Waste Socio-technological Transitions

    DEFF Research Database (Denmark)

    Zapata Campos, Maria José; Zapata, Patrik; Eriksson-Zetterquist, Ulla

    2014-01-01

    -in as the theoretical context to explore the Swedish case. Then, the evolution of waste handling sociotechnological systems and the challenges faced specifically by waste packaging recovery models in Sweden are presented. Finally, the cases are discussed under the prism of the theoretical framework....... recycling rates can be pointless if the amount of waste does not decrease. This is an example of how well established waste recovery regimes can stand in the way of more sustainable forms to handle waste (Corvellec et al, 2013) and, ultimately, hinder the development towards the EU objective (2008...

  17. 78 FR 31571 - Announcement of Requirements and Registration for the “Technology-based Products to Prevent High...

    Science.gov (United States)

    2013-05-24

    ... used by colleges and universities using their existing communication systems (20 points); and... university campuses across the United States, which often result in life-altering consequences such as death... this problem through cost-effective, portable, technology-based products that effectively reach a...

  18. Refining in the 1990s: Technological response to environmental concerns, product quality requirements and changes in demand patterns

    Energy Technology Data Exchange (ETDEWEB)

    Naber, J.E.; Stork, W.H.J.; Blauwhoff, P.M.M. (Koninklijke Shell, Amsterdam (Netherlands). Lab.); Groeneveld, K.J.W. (Shell Internationale Petroleum Maatschappij B.V., The Hague (Netherlands))

    1990-01-01

    The refining industry is faced with a pressing need to protect the environment and with increasing demands for higher quality and changes in the composition of the product mix, partly as a result of a continued decline in demand for residual fuel due to energy savings and competition from other energy sources. An important part of the response to these challenges has been the development and implementation of new and improved technology to increase the refiner's ability to upgrade relatively low-value products to high-quality fuels. This generally involves an increase of the hydrogen content of the products, either by rejecting carbon or by adding hydrogen. In consequence, advanced technology has recently been developed for the conversion of residual components in catalytic crackers (carbon rejection) as well as in residue hydroprocessing (hydrogen addition). However, as a result of the increasing amounts of aromatic components in distillates from residue conversion, higher product quality demands in conjunction with a shift to diesel fuel can only be met by significant further developments in hydroprocessing. These developments favour the low hetero-atom and low-aromatics production in modern hydrocrackers utilising advanced catalysts and process technology. In the more distant future, the advent of new technology for large-scale production of synthesis gas (CO/H{sub 2}) from partial oxidation of natural gas, heavy oil or coal will enable the production of superior-quality non-aromatic middle distillates through sophisticated Fischer-Tropsch catalysis. (orig./EF).

  19. Understanding patient requirements for technology systems that support pain management in palliative care services: A qualitative study.

    Science.gov (United States)

    Allsop, Matthew J; Taylor, Sally; Bennett, Michael I; Bewick, Bridgette M

    2017-11-01

    Approaches to pain management using electronic systems are being developed for use in palliative care. This article explores palliative care patients' perspectives on managing and talking about pain, the role of technology in their lives and how technology could support pain management. Face-to-face interviews were used to understand patient needs and concerns to inform how electronic systems are developed. A total of 13 interviews took place with a convenience sample of community-based patients with advanced cancer receiving palliative care through a hospice. Data were analysed using framework analysis. Four meta-themes emerged: Technology could be part of my care; I'm trying to understand what is going on; My pain is ever-changing and difficult to control; and I'm selective about who to tell about pain. Patients described technology as peripheral to existing processes of care. To be relevant, systems may need to take account of the complexity of a patient's pain experience alongside existing relationships with health professionals.

  20. Requirements and feasibility study of flight demonstration of Active Controls Technology (ACT) on the NASA 515 airplane

    Science.gov (United States)

    Gordon, C. K.

    1975-01-01

    A preliminary design study was conducted to evaluate the suitability of the NASA 515 airplane as a flight demonstration vehicle, and to develop plans, schedules, and budget costs for fly-by-wire/active controls technology flight validation in the NASA 515 airplane. The preliminary design and planning were accomplished for two phases of flight validation.

  1. Deriving Requirements for Pervasive Well-Being Technology From Work Stress and Intervention Theory : Framework and Case Study

    NARCIS (Netherlands)

    Koldijk, S.; Kraaij, W.; Neerincx, M.A.

    2016-01-01

    BACKGROUND: Stress in office environments is a big concern, often leading to burn-out. New technologies are emerging, such as easily available sensors, contextual reasoning, and electronic coaching (e-coaching) apps. In the Smart Reasoning for Well-being at Home and at Work (SWELL) project, we

  2. RAISING INFORMATION AND COMMUNICATION TECHNOLOGIES COMPETENCE OF SCIENTIFIC AND PEDAGOGICAL EMPLOYEES - A KEY REQUIREMENT OF THE QUALITY OF EDUCATIONAL PROCESS

    Directory of Open Access Journals (Sweden)

    Nataliia V. Morze

    2017-06-01

    Full Text Available In the article it was analyzed one of the basic conditions of providing the quality of higher education according to the system of internal quality assurance standards ESG (European quality assurance standards and guidelines to increase the ICT competence of scientific-pedagogical staff of the University. It was described the modular system of training for scientific and pedagogical staff of the Borys Grinchenko Kyiv University. Special attention is paid to the description of the system of raising the level of formation the ICT competence as one of the key competences of the modern teacher. The system of professional development, which is based on creating mixed studying and technology of "flipped classroom", formative assessment, innovative educational and ICT technologies according to the specially designed informative module "Informational and communication technologies", which allows scientific-pedagogical staff to use modern ICT and educational technologies effectively for their further applying in the provision of educational services and the development of quality of open educational content and open educational e-environment available to the student at any convenient time, which will significantly improve the quality of the educational process.

  3. User requirements for innovative nuclear reactors and fuel cycle technologies in the area of economics, environment, safety, waste management, proliferation resistance and cross cutting issues, and methodology for innovative technologies assessment

    International Nuclear Information System (INIS)

    Kupitz, Juergen; Depisch, Frank; Allan, Colin

    2003-01-01

    The IAEA General Conference in 2000 has invited ''all interested Member States to combine their efforts under the aegis of the Agency in considering the issues of the nuclear fuel cycle, in particular by examining innovative and proliferation-resistant nuclear technology''. In response to this invitation, the IAEA initiated an ''International Project on Innovative Nuclear Reactors and Fuel Cycles'', INPRO. The overall objectives of INPRO is to help to ensure that nuclear energy is available to contribute in fulfilling in a sustainable manner energy needs in the 21st century, and to bring together all interested Member States, both technology holders and technology users, to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles that use sound and economically competitive technology. Phase-I of INPRO was initiated in May 2001. During Phase-I, work was subdivided in two sub phase: Phase 1A (finished in June 2003) and Phase 1B (started in June 2003). Phase 1A dealt with the definition of Basic Principles, User Requirements and Criteria, and the development of a methodology for the evaluation of innovative nuclear technologies. In Phase 1A, task groups for several areas were established: (a) Prospects and Potentials of Nuclear Power, (b) Economics; (c) Sustainability and Environment, (d) Safety of Nuclear Installations, (e) Waste Management, (f) Proliferation Resistance, (g) Crosscutting issues and (h) for the Methodology for Assessment. In Phase-IB evaluations of innovative nuclear energy technologies will be performed by Member States against the INPRO Basic Principles, User Requirements and Criteria. This paper summarizes the results achieved in the Phase 1A of INPRO and is a cooperative effort of the INPRO team, consisting of all INPRO cost free experts and task managers. (author)

  4. Transitional issues

    International Nuclear Information System (INIS)

    1998-01-01

    This discussion paper, the fifth in the series developed at the IPPSO Market Design Conference, addressed the issue of the need to prevent Ontario Hydro from taking unfair advantage of independent producers and other stakeholders through activities and investments in new power generating capacity in the transitional period leading up to deregulation. The need for controls is predicated on the assumption that the short-term actions and investments of Ontario Hydro could seriously compromise the position of independent generators, and that without such controls the level playing field essential to the operation of a competitive market, does not exist. Various actual and potential actions of Ontario Hydro were discussed, all of which point to the need for strict controls over Ontario Hydro exercising its dominant market power in an unfair way. It was recommended that as a minimum, the provincial government should no longer provide guarantees for Ontario Hydro capital projects, and that Ontario Hydro be instructed to defer any investment on new or returning generating capacity until the new market is in place. Limits could also be placed on Ontario Hydro's marketing efforts to enter into contracts during the transition period, and Ontario Hydro and municipal utilities should be required to keep separate accounts of their commercial preparation, and to settle such accounts separate from ratepayer revenue

  5. MEGASTAR: The meaning of growth. An assessment of systems, technologies, and requirements. [methodology for display and analysis of energy production and consumption

    Science.gov (United States)

    1974-01-01

    A methodology for the display and analysis of postulated energy futures for the United States is presented. A systems approach methodology including the methodology of technology assessment is used to examine three energy scenarios--the Westinghouse Nuclear Electric Economy, the Ford Technical Fix Base Case and a MEGASTAR generated Alternate to the Ford Technical Fix Base Case. The three scenarios represent different paths of energy consumption from the present to the year 2000. Associated with these paths are various mixes of fuels, conversion, distribution, conservation and end-use technologies. MEGASTAR presents the estimated times and unit requirements to supply the fuels, conversion and distribution systems for the postulated end uses for the three scenarios and then estimates the aggregate manpower, materials, and capital requirements needed to develop the energy system described by the particular scenario.

  6. Transition to large scale use of hydrogen and sustainable energy services. Choices of technology and infrastructure under path dependence, feedback and nonlinearity

    Energy Technology Data Exchange (ETDEWEB)

    Gether, Kaare

    2004-07-01

    We live in a world of becoming. The future is not given, but forms continuously in dynamic processes where path dependence plays a major role. There are many different possible futures. What we actually end up with is determined in part by chance and in part by the decisions we make. To make sound decisions we require models that are flexible enough to identify opportunities and to help us choose options that lead to advantageous alternatives. This way of thinking differs from traditional cost-benefit analysis that employs net present value calculations to choose on purely economic grounds, without regard to future consequences. Time and dynamic behaviour introduce a separate perspective. There is a focus on change, and decisions acquire windows of opportunity: the right decision at the right time may lead to substantial change, while it will have little effect if too early or too late. Modelling needs to reflect this dynamic behaviour. It is the perspective of time and dynamics that leads to a focus on sustainability, and thereby the role hydrogen might play in a future energy system. The present work develops a particular understanding relevant to energy infrastructures. Central elements of this understanding are: competition, market preference and choice beyond costs, bounded rationality, uncertainty and risk, irreversibility, increasing returns, path dependence, feedback, delay, nonlinear behaviour. Change towards a ''hydrogen economy'' will involve far-reaching change away from our existing energy infrastructure. This infrastructure is viewed as a dynamic set of interacting technologies (value sequences) that provide services to end-users and uphold the required supply of energy for this, all the way from primary energy sources. The individual technologies also develop with time. Building on this understanding and analysis, an analytical tool has emerged: the Energy Infrastructure Competition (EICOMP) model. In the model each technology is

  7. The NLC Software Requirements Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Shoaee, Hamid

    2002-08-20

    We describe the software requirements and development methodology developed for the NLC control system. Given the longevity of that project, and the likely geographical distribution of the collaborating engineers, the planned requirements management process is somewhat more formal than the norm in high energy physics projects. The short term goals of the requirements process are to accurately estimate costs, to decompose the problem, and to determine likely technologies. The long term goal is to enable a smooth transition from high level functional requirements to specific subsystem and component requirements for individual programmers, and to support distributed development. The methodology covers both ends of that life cycle. It covers both the analytical and documentary tools for software engineering, and project management support. This paper introduces the methodology, which is fully described in [1].

  8. Methodology for Examining Potential Technology Breakthroughs for Mitigating CO2 and Application to Centralized Solar Photovoltaics

    Science.gov (United States)

    Aggressive reductions in US greenhouse gas emissions will require radical changes in how society generates and uses energy. Technological breakthroughs will be necessary if we are to make this transition cost effectively. With limited resources, understanding the breakthrough pot...

  9. Underground openings in clay formations - Technical requirements on drifting technology and support systems for underground openings and their impact on retreat systems for the installation of engineered barriers

    International Nuclear Information System (INIS)

    Mischo, Helmut

    2012-01-01

    Document available in extended abstract form only. Several countries are currently investigating the possibility of long-term storage of nuclear waste in clay formations, with a special focus on mud-stone formations. During the last decades extensive research has been conducted on the suitability of mud-stone as repository and the related special requirements of the clay matrix - with significant success. The knowledge base on the behaviour of the host formations during the mining phase of the excavations on the other hand is relatively limited compared to that of other investigated host rock formations, e.g. salt. With the low value of mud-stone and its relatively limited industrial application range, there have not been any large scale commercial underground mining activities in recent years to provide a significant and independent database on the behaviour of the selected mud-stone formations or their geological analogue during mining activities. Most information currently used for the assessment of this type of sediment and the planning of the mining activities has been gathered either during the execution of logistics and tunneling projects or during the excavation of today's underground laboratories. There is, however, a database on a vast variety of clay deposit types and morphologies available from commercial underground clay mining activities worldwide. The data available on commercial clay mining shows significant differences for each and every technological stage of clay mining as compared to the stages of any other mining operation. This is, amongst other things, due to the high and partly extreme ductility and creeping properties of typical clay formations, especially when considering their sensitiveness to a changing water content. In general the technical and technological differences include the applicable mining technology for the excavation of underground openings, the need for an advancement of any available technology to waterless variants as

  10. SafeLand guidelines for landslide monitoring and early warning systems in Europe - Design and required technology

    Science.gov (United States)

    Bazin, S.

    2012-04-01

    Landslide monitoring means the comparison of landslide characteristics like areal extent, speed of movement, surface topography and soil humidity from different periods in order to assess landslide activity. An ultimate "universal" methodology for this purpose does not exist; every technology has its own advantages and disadvantages. End-users should carefully consider each one to select the methodologies that represent the best compromise between pros and cons, and are best suited for their needs. Besides monitoring technology, there are many factors governing the choice of an Early Warning System (EWS). A people-centred EWS necessarily comprises five key elements: (1) knowledge of the risks; (2) identification, monitoring, analysis and forecasting of the hazards; (3) operational centre; (4) communication or dissemination of alerts and warnings; and (5) local capabilities to respond to the warnings received. The expression "end-to-end warning system" is also used to emphasize that EWSs need to span all steps from hazard detection through to community response. The aim of the present work is to provide guidelines for establishing the different components for landslide EWSs. One of the main deliverables of the EC-FP7 SafeLand project addresses the technical and practical issues related to monitoring and early warning for landslides, and identifies the best technologies available in the context of both hazard assessment and design of EWSs. This deliverable targets the end-users and aims to facilitate the decision process by providing guidelines. For the purpose of sharing the globally accumulated expertise, a screening study was done on 14 EWSs from 8 different countries. On these bases, the report presents a synoptic view of existing monitoring methodologies and early-warning strategies and their applicability for different landslide types, scales and risk management steps. Several comprehensive checklists and toolboxes are also included to support informed

  11. Method of Maintaining the Required Values of Surface Roughness and Prediction of Technological Conditions for Cold Sheet Rolling

    Directory of Open Access Journals (Sweden)

    Valíček J.

    2014-06-01

    Full Text Available The paper is based on results obtained from topography of surfaces of sheets rolled from deep-drawing steel of the type KOHAL grade 697, non-alloy low-carbon structural steel EN 10263-2:2004 and aluminium. The presented results document correctness of the assumption that the rolling force Froll increases with the increasing reduction Δh and the quality of the rolled surface is improved at the simultaneous increasing of strength of rolled sheets and the decreasing of size of structural grains. The experiment was performed on the two-high rolling stand DUO 210 SVa, which enables only non-continuous technology in contrast to the rolling mill with continuous reduction on one sheet in several degrees on rolling trains, in consequence of which the obtained height parameters of the section are in close correlation with the predicted dependence. Contribution of the work consists in the creation of a mathematical model (algorithm for predicting technological parameters of the two-high rolling stand DUO 210 SVa at change of the absolute reduction Δh, for example for a deep-drawing steel of the type KOHAL grade 697 and non-alloy lowcarbon structural steel PN EN 10263-2:2004 and aluminium, and also in the development of a method of calculation applicable to any material being rolled in general, because the authors have found that various materials can be differentiated by a derived analytical criterion IKP. This criterion is a function of ratio between the modulus of elasticity of reference material and that of actually rolled material. The reference material is here deep-drawing steel of the type KOHAL grade 697. Verification was carried out by measuring changes of final surface roughness profile and final strength of rolled sheets of the stated materials in relation to reductions and those were compared with theoretically predicted values. It is possible to identify and predict on the basis of this algorithm an instant state of surface topography in

  12. Technology assessment of long distance liquid natural gas pipelines. Phase 9. Available and/or required equipment

    Energy Technology Data Exchange (ETDEWEB)

    1977-02-01

    This phase of the technology assessment of liquid natural gas pipelines assembles a listing of the materials and equipment which might be used to mechanically build an LNG pipeline. It lists material and equipment which practically could be used in such a pipeline either at a present state of the art, or by adaptation in terms of materials or techniques, or after some development work. Other than that the material and equipment is proposed for use in an LNG pipeline, no new real concept of pipeline or refrigeration plant equipment is proposed. Rather the equipment has been selected so as to conform as closely as possible to established pipeline practice.

  13. What Types of Instructional Shifts Do Students Experience? Investigating Active Learning in Science, Technology, Engineering, and Math Classes across Key Transition Points from Middle School to the University Level

    OpenAIRE

    Kenneth Akiha; Kenneth Akiha; Emilie Brigham; Emilie Brigham; Brian A. Couch; Justin Lewin; Justin Lewin; Marilyne Stains; MacKenzie R. Stetzer; MacKenzie R. Stetzer; Erin L. Vinson; Erin L. Vinson; Michelle K. Smith; Michelle K. Smith

    2018-01-01

    Despite the need for a strong Science, Technology, Engineering, and Math (STEM) workforce, there is a high attrition rate for students who intend to complete undergraduate majors in these disciplines. Students who leave STEM degree programs often cite uninspiring instruction in introductory courses, including traditional lecturing, as a reason. While undergraduate courses play a critical role in STEM retention, little is understood about the instructional transitions students encounter upon m...

  14. Technologies for destruction of long-lived radionuclides in high-level nuclear waste: Overview and requirements

    International Nuclear Information System (INIS)

    Arthur, E.D.

    1993-01-01

    This paper, and this topical session on Nuclear Waste Minimization, Management and Remediation, focuses on two nuclear systems, and their associated technologies, that have the potential to address concerns surrounding long-lived radionuclides in high-level waste. Both systems offer technology applicable to HLW from present light-water reactors (LWR). Additionally these systems represent advanced nuclear power concepts that have important features associated with integrated management of wastes, long-term fuel supplies, and enhanced safety. The first system is the Integral Fast Reactor (IFR) concept. This system incorporates a metal-fueled fast reactor coupled with chemical separations based on pyroprocessing to produce power while simultaneously burning long-lived actinide waste. IFR applications include burning of actinides from current LWR spent fuel and energy production in a breeder environment. The second concept, Accelerator Transmutation of Waste (ATW), is based upon an accelerator-induced intense source of thermal neutrons and is aimed at destruction of long-lived actinides and fission products. This concept can be applied to long-lived radionuclides in spent fuel HLW as well as a future fission power source built around use of natural thorium or uranium as fuels coupled with concurrent waste destruction

  15. Supporting Transition

    Science.gov (United States)

    Qureshi, Asima; Petrucco, James

    2018-01-01

    Meadowbrook Primary School has explored the use of The Teacher Assessment in Primary Science (TAPS) to support transition, initially for transfer to secondary school and now for transition from Early Years Foundation Stage (EYFS) into Key Stage 1 (ages 5-7). This article will consider an example of a secondary transition project and discuss the…

  16. The case for applying an early-lifecycle technology evaluation methodology to comparative evaluation of requirements engineering research

    Science.gov (United States)

    Feather, Martin S.

    2003-01-01

    The premise of this paper is taht there is a useful analogy between evaluation of proposed problem solutions and evaluation of requirements engineering research itself. Both of these application areas face the challenges of evaluation early in the lifecycle, of the need to consider a wide variety of factors, and of the need to combine inputs from multiple stakeholders in making thse evaluation and subsequent decisions.

  17. A Study to Develop Transition Plan Requirements for the Occupancy of the New Madigan Army Medical Center at Fort Lewis, Washington

    Science.gov (United States)

    1988-07-01

    incremental expenditures by year have not been established. When they are established they will be based on required delivery dates and then adjusted for...associated lift systems has been provided for in the MCA contract and must be bidgeted from OMA appropriations upon beneficial occupancy in July 1991

  18. 34 CFR 380.20 - What requirements must a grantee meet before it provides for the transition of an individual in...

    Science.gov (United States)

    2010-07-01

    ... REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND DEMONSTRATIONS FOR PROVIDING SUPPORTED EMPLOYMENT SERVICES TO INDIVIDUALS WITH THE MOST SEVERE DISABILITIES AND TECHNICAL ASSISTANCE PROJECTS What Post-Award Conditions Must Be Met by a Grantee? § 380.20 What requirements must a grantee meet before...

  19. Technologies for destruction of long-lived radionuclides in high-level nuclear waste - overview and requirements

    International Nuclear Information System (INIS)

    Arthur, E.D.

    1993-01-01

    A major issue surrounding current nuclear power generation is the management and disposal of long-lived, high-level waste (HLW). The planned and scientifically acceptable destination for this waste is in deep underground, geologically stable, repositories. However, public concerns surrounding such disposal of long-lived nuclear wastes and other issues such as proliferation and safety negatively affect the potential role that nuclear power can play in meeting current and future national energy needs. This paper and this topical session on nuclear waste minimization, management, and remediation focus on two nuclear systems and their associated technologies that have the potential to address concerns surrounding long-lived radionuclides in HLW. Both systems offer technology applicable to HLW from current light water reactors (LWRs). In addition, these systems represent advanced nuclear power concepts that have important features associated with integrated management of wastes long-term fuel supplies, and enhanced safety. The first system is the integral fast reactor (IFR) concept. This system incorporates a metal-fueled fast reactor coupled with chemical separations based on pyroprocessing to produce power while burning long-lived actinide waste. The IFR applications include the burning of actinides from current LWR spent fuel and energy production in a breeder environment. The second concept, accelerator transmutation of waste (ATW), is based on an accelerator-induced intense source of thermal neutrons and is aimed at the destruction of long-lived actinides and fission products. This concept can be applied to long-lived radionuclides in spent-fuel HLW as well as a future fission power source built around use of natural thorium or uranium as fuels coupled with concurrent waste destruction

  20. Trust transitivity in social networks.

    Directory of Open Access Journals (Sweden)

    Oliver Richters

    Full Text Available Non-centralized recommendation-based decision making is a central feature of several social and technological processes, such as market dynamics, peer-to-peer file-sharing and the web of trust of digital certification. We investigate the properties of trust propagation on networks, based on a simple metric of trust transitivity. We investigate analytically the percolation properties of trust transitivity in random networks with arbitrary in/out-degree distributions, and compare with numerical realizations. We find that the existence of a non-zero fraction of absolute trust (i.e. entirely confident trust is a requirement for the viability of global trust propagation in large systems: The average pair-wise trust is marked by a discontinuous transition at a specific fraction of absolute trust, below which it vanishes. Furthermore, we perform an extensive analysis of the Pretty Good Privacy (PGP web of trust, in view of the concepts introduced. We compare different scenarios of trust distribution: community- and authority-centered. We find that these scenarios lead to sharply different patterns of trust propagation, due to the segregation of authority hubs and densely-connected communities. While the authority-centered scenario is more efficient, and leads to higher average trust values, it favours weakly-connected "fringe" nodes, which are directly trusted by authorities. The community-centered scheme, on the other hand, favours nodes with intermediate in/out-degrees, in detriment of the authorities and its "fringe" peers.

  1. Trust Transitivity in Social Networks

    Science.gov (United States)

    Richters, Oliver; Peixoto, Tiago P.

    2011-01-01

    Non-centralized recommendation-based decision making is a central feature of several social and technological processes, such as market dynamics, peer-to-peer file-sharing and the web of trust of digital certification. We investigate the properties of trust propagation on networks, based on a simple metric of trust transitivity. We investigate analytically the percolation properties of trust transitivity in random networks with arbitrary in/out-degree distributions, and compare with numerical realizations. We find that the existence of a non-zero fraction of absolute trust (i.e. entirely confident trust) is a requirement for the viability of global trust propagation in large systems: The average pair-wise trust is marked by a discontinuous transition at a specific fraction of absolute trust, below which it vanishes. Furthermore, we perform an extensive analysis of the Pretty Good Privacy (PGP) web of trust, in view of the concepts introduced. We compare different scenarios of trust distribution: community- and authority-centered. We find that these scenarios lead to sharply different patterns of trust propagation, due to the segregation of authority hubs and densely-connected communities. While the authority-centered scenario is more efficient, and leads to higher average trust values, it favours weakly-connected “fringe” nodes, which are directly trusted by authorities. The community-centered scheme, on the other hand, favours nodes with intermediate in/out-degrees, in detriment of the authorities and its “fringe” peers. PMID:21483683

  2. Solar transit stops on Central Avenue.

    Science.gov (United States)

    2011-02-01

    This initiative sought to demonstrate existing commercially available transportation technologies for transit customer amenities that could significantly enhance transit experience and attract more riders therefore making the Capital District Tra...

  3. Continuous remote monitoring of COPD patients-justification and explanation of the requirements and a survey of the available technologies.

    Science.gov (United States)

    Tomasic, Ivan; Tomasic, Nikica; Trobec, Roman; Krpan, Miroslav; Kelava, Tomislav

    2018-04-01

    Remote patient monitoring should reduce mortality rates, improve care, and reduce costs. We present an overview of the available technologies for the remote monitoring of chronic obstructive pulmonary disease (COPD) patients, together with the most important medical information regarding COPD in a language that is adapted for engineers. Our aim is to bridge the gap between the technical and medical worlds and to facilitate and motivate future research in the field. We also present a justification, motivation, and explanation of how to monitor the most important parameters for COPD patients, together with pointers for the challenges that remain. Additionally, we propose and justify the importance of electrocardiograms (ECGs) and the arterial carbon dioxide partial pressure (PaCO 2 ) as two crucial physiological parameters that have not been used so far to any great extent in the monitoring of COPD patients. We cover four possibilities for the remote monitoring of COPD patients: continuous monitoring during normal daily activities for the prediction and early detection of exacerbations and life-threatening events, monitoring during the home treatment of mild exacerbations, monitoring oxygen therapy applications, and monitoring exercise. We also present and discuss the current approaches to decision support at remote locations and list the normal and pathological values/ranges for all the relevant physiological parameters. The paper concludes with our insights into the future developments and remaining challenges for improvements to continuous remote monitoring systems. Graphical abstract ᅟ.

  4. Man as a protective barrier in nuclear power technology: the requirements, viewed by the Federal Minister for Home Affairs

    International Nuclear Information System (INIS)

    Fechner, J.B.

    1981-06-01

    Evaluation of nuclear power plant incidents frequently reveals man as a major element of risk. Yet, in a nuclear power plant man has the function of an important protective barrier, either by maintaining the plant, by detecting and limiting faults or incidents, or by taking proper measures in accidents. This is true despite, or perhaps because of, the high degree of plant automation. For this reason, it is indispensable that a high level of engineered plant safeguards be accompanied by a minimum of faults contributed by human action. This implies that the staff and their working conditions must meet the same stringent safety requirements as the nuclear power plant proper. Reactor manufacturers, nuclear power plant operators and the responsible authorities try to optimize this human contribution. The Federal Ministry of the Interior, through its Special Technical Guidelines and its continuation training measures, occupies an important position in this respect. Further measures and ordinances are being prepared by that Ministry

  5. Radiological source tracking in oil/gas, medical and other industries: requirements and specifications for passive RFID technology

    Energy Technology Data Exchange (ETDEWEB)

    Dowla, Farid U. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-01-01

    Subsurface sensors that employ radioisotopes, such 241Am-Be and 137Cs, for reservoir characterization must be tracked for safety and security reasons. Other radiological sources are also widely used in medicine. The radiological source containers, in both applications, are small, mobile and used widely worldwide. The nuclear sources pose radiological dispersal device (RDD) security risks. Security concerns with the industrial use of radionuclide sources is in fact quite high as it is estimated that each year hundreds of sealed sources go missing, either lost or stolen. Risk mitigation efforts include enhanced regulations, source-use guidelines, research and development on electronic tracking of sources. This report summarizes the major elements of the requirements and operational concepts of nuclear sources with the goal of developing automated electronic tagging and locating systems.

  6. Renewable energy technologies for irrigation water pumping in India: projected levels of dissemination, energy delivery and investment requirements using available diffusion models

    Energy Technology Data Exchange (ETDEWEB)

    Pallav Purohit; Kandpal, T.C. [Indian Institute of Technology, New Delhi (India). Centre for Energy Studies

    2005-12-01

    Using the past diffusion trends of four renewable energy technologies for irrigation water pumping in India (SPV pumps, windmill pumps and biogas/producer gas driven dual fuel engine pumps), results of an attempt to project their future dissemination levels, have been presented in this study. The likely contribution of the renewable energy options considered in the study to the projected energy demand for irrigation water pumping in India has been estimated. Estimates of the associated investment requirements taking into account the learning effect have also been presented. (author)

  7. U.S. aerospace industry opinion of the effect of computer-aided prediction-design technology on future wind-tunnel test requirements for aircraft development programs

    Science.gov (United States)

    Treon, S. L.

    1979-01-01

    A survey of the U.S. aerospace industry in late 1977 suggests that there will be an increasing use of computer-aided prediction-design technology (CPD Tech) in the aircraft development process but that, overall, only a modest reduction in wind-tunnel test requirements from the current level is expected in the period through 1995. Opinions were received from key spokesmen in 23 of the 26 solicited major companies or corporate divisions involved in the design and manufacture of nonrotary wing aircraft. Development programs for nine types of aircraft related to test phases and wind-tunnel size and speed range were considered.

  8. The educational needs of health information managers in an electronic environment: what information technology and health informatics skills and knowledge are required?

    Science.gov (United States)

    Robertson, Merryn; Callen, Joanne

    The profile of health information managers (HIMs) employed within one metropolitan area health service in New South Wales (NSW) was identified, together with which information technology and health informatics knowledge and skills they possess, and which ones they require in their workplace. The subjects worked in a variety of roles: 26% were employed in the area's Information Systems Division developing and implementing point-of-care clinical systems. Health information managers perceived they needed further continuing and formal education in point-of-care clinical systems, decision support systems, the electronic health record, privacy and security, health data collections, and database applications.

  9. 47 CFR 74.690 - Transition of the 1990-2025 MHz band from the Broadcast Auxiliary Service to emerging technologies.

    Science.gov (United States)

    2010-10-01

    ... Broadcast Auxiliary Service to emerging technologies. 74.690 Section 74.690 Telecommunication FEDERAL... of the 1990-2025 MHz band from the Broadcast Auxiliary Service to emerging technologies. (a) New... licensed emerging technology services will maintain primary status in the band until the Existing Licensee...

  10. Transition radiation and transition scattering

    International Nuclear Information System (INIS)

    Ginzburg, V.L.

    1982-01-01

    Transition radiation is a process of a rather general character. It occurs when some source, which does not have a proper frequency (for example, a charge) moves at a constant velocity in an inhomogeneous and (or) nonstationary medium or near such a medium. The simplest type of transition radiation takes place when a charge crosses a boundary between two media (the role of one of the media may be played by vacuum). In the case of periodic variation of the medium, transition radiation possesses some specific features (resonance transition radiation or transition scattering). Transition scattering occurs, in particular, when a permittivity wave falls onto an nonmoving (fixed) charge. Transition scattering is closely connected with transition bremsstrahlung radiation. All these transition processes are essential for plasma physics. Transition radiation and transition scattering have analogues outside the framework of electrodynamics (like in the case of Vavilov-Cherenkov radiation). In the present report the corresponding range of phenomena is elucidated, as far as possible, in a generally physical aspect. (Auth.)

  11. Matter in transition

    International Nuclear Information System (INIS)

    Anderson, Lara B.; Gray, James; Raghuram, Nikhil; Taylor, Washington

    2016-01-01

    We explore a novel type of transition in certain 6D and 4D quantum field theories, in which the matter content of the theory changes while the gauge group and other parts of the spectrum remain invariant. Such transitions can occur, for example, for SU(6) and SU(7) gauge groups, where matter fields in a three-index antisymmetric representation and the fundamental representation are exchanged in the transition for matter in the two-index antisymmetric representation. These matter transitions are realized by passing through superconformal theories at the transition point. We explore these transitions in dual F-theory and heterotic descriptions, where a number of novel features arise. For example, in the heterotic description the relevant 6D SU(7) theories are described by bundles on K3 surfaces where the geometry of the K3 is constrained in addition to the bundle structure. On the F-theory side, non-standard representations such as the three-index antisymmetric representation of SU(N) require Weierstrass models that cannot be realized from the standard SU(N) Tate form. We also briefly describe some other situations, with groups such as Sp(3), SO(12), and SU(3), where analogous matter transitions can occur between different representations. For SU(3), in particular, we find a matter transition between adjoint matter and matter in the symmetric representation, giving an explicit Weierstrass model for the F-theory description of the symmetric representation that complements another recent analogous construction.

  12. Requirements for a Dynamic Solvent Extraction Module to Support Development of Advanced Technologies for the Recycle of Used Nuclear Fuel

    International Nuclear Information System (INIS)

    Law, Jack; Rutledge, Veronica; Pereira, Candido; Copple, Jackie; Frey, Kurt; Krebs, John; Maggos, Laura; Nichols, Kevin; Wardle, Kent; Sadasivan, Pratap; DeAlmieda, Valmor; Depaoli, David

    2011-01-01

    The Department of Energy's Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program has been established to create and deploy next generation, verified and validated nuclear energy modeling and simulation capabilities for the design, implementation, and operation of future nuclear energy systems to improve the U.S. energy security. As part of the NEAMS program, Integrated Performance and Safety Codes (IPSC's) are being produced to significantly advance the status of modeling and simulation of energy systems beyond what is currently available to the extent that the new codes be readily functional in the short term and extensible in the longer term. The four IPSC areas include Safeguards and Separations, Reactors, Fuels, and Waste Forms. As part of the Safeguards and Separations (SafeSeps) IPSC effort, interoperable process models are being developed that enable dynamic simulation of an advanced separations plant. A SafeSepss IPSC 'toolkit' is in development to enable the integration of separation process modules and safeguards tools into the design process by providing an environment to compose, verify and validate a simulation application to be used for analysis of various plant configurations and operating conditions. The modules of this toolkit will be implemented on a modern, expandable architecture with the flexibility to explore and evaluate a wide range of process options while preserving their stand-alone usability. Modules implemented at the plant-level will initially incorporate relatively simple representations for each process through a reduced modeling approach. Final versions will incorporate the capability to bridge to subscale models to provide required fidelity in chemical and physical processes. A dynamic solvent extraction model and its module implementation are needed to support the development of this integrated plant model. As a stand-alone application, it will also support solvent development of extraction flowsheets and integrated

  13. Requirements for a Dynamic Solvent Extraction Module to Support Development of Advanced Technologies for the Recycle of Used Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Jack Law; Veronica Rutledge; Candido Pereira; Jackie Copple; Kurt Frey; John Krebs; Laura Maggos; Kevin Nichols; Kent Wardle; Pratap Sadasivan; Valmor DeAlmieda; David Depaoli

    2011-06-01

    The Department of Energy's Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program has been established to create and deploy next generation, verified and validated nuclear energy modeling and simulation capabilities for the design, implementation, and operation of future nuclear energy systems to improve the U.S. energy security. As part of the NEAMS program, Integrated Performance and Safety Codes (IPSC's) are being produced to significantly advance the status of modeling and simulation of energy systems beyond what is currently available to the extent that the new codes be readily functional in the short term and extensible in the longer term. The four IPSC areas include Safeguards and Separations, Reactors, Fuels, and Waste Forms. As part of the Safeguards and Separations (SafeSeps) IPSC effort, interoperable process models are being developed that enable dynamic simulation of an advanced separations plant. A SafeSepss IPSC 'toolkit' is in development to enable the integration of separation process modules and safeguards tools into the design process by providing an environment to compose, verify and validate a simulation application to be used for analysis of various plant configurations and operating conditions. The modules of this toolkit will be implemented on a modern, expandable architecture with the flexibility to explore and evaluate a wide range of process options while preserving their stand-alone usability. Modules implemented at the plant-level will initially incorporate relatively simple representations for each process through a reduced modeling approach. Final versions will incorporate the capability to bridge to subscale models to provide required fidelity in chemical and physical processes. A dynamic solvent extraction model and its module implementation are needed to support the development of this integrated plant model. As a stand-alone application, it will also support solvent development of extraction flowsheets

  14. Computational advances in transition phase analysis

    International Nuclear Information System (INIS)

    Morita, K.; Kondo, S.; Tobita, Y.; Shirakawa, N.; Brear, D.J.; Fischer, E.A.

    1994-01-01

    In this paper, historical perspective and recent advances are reviewed on computational technologies to evaluate a transition phase of core disruptive accidents in liquid-metal fast reactors. An analysis of the transition phase requires treatment of multi-phase multi-component thermohydraulics coupled with space- and energy-dependent neutron kinetics. Such a comprehensive modeling effort was initiated when the program of SIMMER-series computer code development was initiated in the late 1970s in the USA. Successful application of the latest SIMMER-II in USA, western Europe and Japan have proved its effectiveness, but, at the same time, several areas that require further research have been identified. Based on the experience and lessons learned during the SIMMER-II application through 1980s, a new project of SIMMER-III development is underway at the Power Reactor and Nuclear Fuel Development Corporation (PNC), Japan. The models and methods of SIMMER-III are briefly described with emphasis on recent advances in multi-phase multi-component fluid dynamics technologies and their expected implication on a future reliable transition phase analysis. (author)

  15. Development of severe accident evaluation technology (level 2 PSA) for sodium-cooled fast reactors. (3) Identification of dominant factors in transition phase of unprotected events

    International Nuclear Information System (INIS)

    Tobita, Yoshiharu; Yamano, Hidemasa; Sato, Ikken

    2009-01-01

    The event progression of the transition phase in the unprotected loss of flow accident of the JSFR design concept was analyzed using the SIMMER-III code reflecting the knowledge obtained from the EAGLE experimental program. It was clarified through the parametric calculations that the fuel discharge behavior through the paths such as the inner duct of modified-FAIDUS and control-rod guide tube is playing a very important role. Effective fuel discharge through these paths prevents possibility of severe recriticality events. Important factors dominating the transition phase were identified through these parametric calculations. (author)

  16. Drifting between transitions : Lessons from the environmental transition around the river Acheloos Diversion project in Greece

    NARCIS (Netherlands)

    Frantzeskaki, N.; Thissen, W.; Grin, J.

    Systems can experience different types of transitions. The existing literature on transitions distinguishes socio-technological, social-ecological and institutional transitions that each focus on different aspects of real-life systems. For every one of these types of transitions we have identified a

  17. A cloaking device for transiting planets

    Science.gov (United States)

    Kipping, David M.; Teachey, Alex

    2016-06-01

    The transit method is presently the most successful planet discovery and characterization tool at our disposal. Other advanced civilizations would surely be aware of this technique and appreciate that their home planet's existence and habitability is essentially broadcast to all stars lying along their ecliptic plane. We suggest that advanced civilizations could cloak their presence, or deliberately broadcast it, through controlled laser emission. Such emission could distort the apparent shape of their transit light curves with relatively little energy, due to the collimated beam and relatively infrequent nature of transits. We estimate that humanity could cloak the Earth from Kepler-like broad-band surveys using an optical monochromatic laser array emitting a peak power of ˜30 MW for ˜10 hours per year. A chromatic cloak, effective at all wavelengths, is more challenging requiring a large array of tunable lasers with a total power of ˜250 MW. Alternatively, a civilization could cloak only the atmospheric signatures associated with biological activity on their world, such as oxygen, which is achievable with a peak laser power of just ˜160 kW per transit. Finally, we suggest that the time of transit for optical Search for Extraterrestrial Intelligence (SETI) is analogous to the water-hole in radio SETI, providing a clear window in which observers may expect to communicate. Accordingly, we propose that a civilization may deliberately broadcast their technological capabilities by distorting their transit to an artificial shape, which serves as both a SETI beacon and a medium for data transmission. Such signatures could be readily searched in the archival data of transit surveys.

  18. Transitional Phenomena on Phase Change Materials

    Directory of Open Access Journals (Sweden)

    Wójcik Tadeusz M.

    2014-03-01

    Full Text Available One of the most significant problem with technology development is transferring of large heat fluxes, which requires constant heat transfer temperature (in the specified temperature range. This problem concern mainly the nuclear energetics, space technologies, military technologies and most of all electronics containing integrated circuits with very large scale of integrations. Intensive heat transfer and thermal energy storage are possible by the use of phase change materials (PCMs. In the paper there are presented preliminary results of research on the use of liquid-gas (L-G PCMs and solid-solid phase change materials (S-S PCMs. For L-G PCMs the boiling characteristics were determined by increasing and decreasing the heat flux, which for certain sets of structural parameters of the heating surface and the physical properties of the liquid induce a variety of forms of transitional phenomena. Thermal energy storage is much more effective when using PCMs than sensible heat.

  19. Examining hydrogen transitions.

    Energy Technology Data Exchange (ETDEWEB)

    Plotkin, S. E.; Energy Systems

    2007-03-01

    This report describes the results of an effort to identify key analytic issues associated with modeling a transition to hydrogen as a fuel for light duty vehicles, and using insights gained from this effort to suggest ways to improve ongoing modeling efforts. The study reported on here examined multiple hydrogen scenarios reported in the literature, identified modeling issues associated with those scenario analyses, and examined three DOE-sponsored hydrogen transition models in the context of those modeling issues. The three hydrogen transition models are HyTrans (contractor: Oak Ridge National Laboratory), MARKAL/DOE* (Brookhaven National Laboratory), and NEMS-H2 (OnLocation, Inc). The goals of these models are (1) to help DOE improve its R&D effort by identifying key technology and other roadblocks to a transition and testing its technical program goals to determine whether they are likely to lead to the market success of hydrogen technologies, (2) to evaluate alternative policies to promote a transition, and (3) to estimate the costs and benefits of alternative pathways to hydrogen development.

  20. Characterization, monitoring, and sensor technology crosscutting program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The technology development must also be cost effective and appropriate to EM-30/40/60 needs. Furthermore, the required technologies must be delivered and implemented when needed. Accordingly, and to ensure that available DOE and other national resources are focused an the most pressing needs, management of the technology development is concentrated on the following Focus Areas: Contaminant Plume Containment and Remediation (PFA); Landfill Stabilization (LSFA); High-Level Waste Tank Remediation (TFA); Mixed Waste Characterization, Treatment, and Disposal (MWFA); and Facility Deactivation, Decommissioning, and Material Disposition (FDDMDFA). Brief descriptions of CMST-CP projects funded in FY95 are presented.

  1. Characterization, monitoring, and sensor technology crosscutting program: Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The technology development must also be cost effective and appropriate to EM-30/40/60 needs. Furthermore, the required technologies must be delivered and implemented when needed. Accordingly, and to ensure that available DOE and other national resources are focused an the most pressing needs, management of the technology development is concentrated on the following Focus Areas: Contaminant Plume Containment and Remediation (PFA); Landfill Stabilization (LSFA); High-Level Waste Tank Remediation (TFA); Mixed Waste Characterization, Treatment, and Disposal (MWFA); and Facility Deactivation, Decommissioning, and Material Disposition (FDDMDFA). Brief descriptions of CMST-CP projects funded in FY95 are presented

  2. Low upper-shelf toughness, high transition temperature test insert in HSST [Heavy Section Steel Technology] PTSE-2 [Pressurized Thermal Shock Experiment-2] vessel and wide plate test specimens: Final report

    International Nuclear Information System (INIS)

    Domian, H.A.

    1987-02-01

    A piece of A387, Grade 22 Class 2 (2-1/4 Cr - 1 Mo) steel plate specially heat treated to produce low upper-shelf (LUS) toughness and high transition temperature was installed in the side wall of Heavy Section Steel Technology (HHST) vessel V-8. This vessel is to be tested by the Oak Ridge National Laboratory (ORNL) in the Pressurized Thermal Shock Experiment-2 (PTSE-2) project of the HSST program. Comparable pieces of the plate were made into six wide plate specimens and other samples. These samples underwent tensile tests, Charpy tests, and J-integral tests. The results of these tests are given in this report

  3. Successive Transitions in Ecodesign

    DEFF Research Database (Denmark)

    Boks, Casper; McAloone, Tim C.

    2008-01-01

    In the past 15 years, stimulated by a growing environmental concern and awareness in the media, ecodesign, or design for environment, has expanded considerably as a scientific research area; from a group of opportunistic eco-pathfinders trying to optimise a product’s recyclability......, into acknowledged scientific research regarding technology transfer and commercialisation. This paper proposes that this maturing process took place through a number of transitions; this is illustrated by discussing characteristic aspects of each transition, together providing a historic account of how academic...

  4. Modeling Generational Transitions from Aggregate Data

    NARCIS (Netherlands)

    Ph.H.B.F. Franses (Philip Hans); S. Stremersch (Stefan)

    2002-01-01

    textabstractUsing only aggregate sales data, the model we propose decomposes the diffusion processes of the respective technological generations and tests if different technological generations have different diffusion parameters. It also estimates the location of the generational transition from

  5. Lattice Location of Transition Metals in Semiconductors

    CERN Multimedia

    2002-01-01

    %IS366 %title\\\\ \\\\Transition metals (TMs) in semiconductors have been the subject of considerable research for nearly 40 years. This is due both to their role as important model impurities for deep centers in semiconductors, and to their technological impact as widespread contaminants in Si processing, where the miniaturization of devices requires to keep their sheet concentration below 10$^{10}$ cm$^{-2}$. As a consequence of the low TM solubility, conventional ion beam methods for direct lattice location have failed completely in identifying the lattice sites of isolated transition metals. Although electron paramagnetic resonance (EPR) has yielded valuable information on a variety of TM centers, it has been unable to detect certain defects considered by theory, e.g., isolated interstitial or substitutional Cu in Si. The proposed identity of other EPR centers such as substitutional Fe in Si, still needs confirmation by additional experimental methods. As a consequence, the knowledge on the structural propert...

  6. Milestoning with transition memory

    Science.gov (United States)

    Hawk, Alexander T.; Makarov, Dmitrii E.

    2011-12-01

    Milestoning is a method used to calculate the kinetics and thermodynamics of molecular processes occurring on time scales that are not accessible to brute force molecular dynamics (MD). In milestoning, the conformation space of the system is sectioned by hypersurfaces (milestones), an ensemble of trajectories is initialized on each milestone, and MD simulations are performed to calculate transitions between milestones. The transition probabilities and transition time distributions are then used to model the dynamics of the system with a Markov renewal process, wherein a long trajectory of the system is approximated as a succession of independent transitions between milestones. This approximation is justified if the transition probabilities and transition times are statistically independent. In practice, this amounts to a requirement that milestones are spaced such that trajectories lose position and velocity memory between subsequent transitions. Unfortunately, limiting the number of milestones limits both the resolution at which a system's properties can be analyzed, and the computational speedup achieved by the method. We propose a generalized milestoning procedure, milestoning with transition memory (MTM), which accounts for memory of previous transitions made by the system. When a reaction coordinate is used to define the milestones, the MTM procedure can be carried out at no significant additional expense as compared to conventional milestoning. To test MTM, we have applied its version that allows for the memory of the previous step to the toy model of a polymer chain undergoing Langevin dynamics in solution. We have computed the mean first passage time for the chain to attain a cyclic conformation and found that the number of milestones that can be used, without incurring significant errors in the first passage time is at least 8 times that permitted by conventional milestoning. We further demonstrate that, unlike conventional milestoning, MTM permits

  7. [Requirements for and expectations of health technology assessment in Galicia (Spain). A qualitative study from the perspective of decision-makers and clinicians].

    Science.gov (United States)

    Varela-Lema, Leonor; Merino, Gerardo Atienza; García, Marisa López; Martínez, María Vidal; Triana, Elena Gervas; Mota, Teresa Cerdá

    2011-01-01

    To explore perceptions of the use of health technology assessment (HTA) in the Galician public health system, identify opinions on the usefulness of the products and services developed by the Galician Health Technology Assessment Agency (avalia-t), and determine the barriers and facilitators to the transfer of results to clinical practice. We performed a qualitative study based on in-depth semi-structured interviews of 20 intentionally selected experts (10 health care professionals and 10 hospital decision makers). The interviews were tape recorded and transcribed for inductive thematic analysis. Interest in HTA activities was high, but most informants considered these activities to be underused as a tool to aid decision making in clinical practice. A series of key factors was identified to guarantee HTA use: greater dissemination of HTA activities and availability of the results, increased involvement and communication among health care professionals in the selection and prioritization of relevant research, contextualization and adaptation of results to the local context, increased organizational support and greater financial resources. The present study allows end-userś opinions on the utility of the various products/services offered by HTA agencies to be contrasted in order to adapt HTA activity to their needs and requirements. The involvement of health care professionals in all HTA fields is perceived as one of the main lines of action for HTA agencies. Such involvement could be achieved by reinforcing personal contact and increasing feedback to collaborators. Copyright © 2010 SESPAS. Published by Elsevier Espana. All rights reserved.

  8. Technologies for deposition of transition metal oxide thin films: application as functional layers in “Smart windows” and photocatalytic systems

    Science.gov (United States)

    Gesheva, K.; Ivanova, T.; Bodurov, G.; Szilágyi, I. M.; Justh, N.; Kéri, O.; Boyadjiev, S.; Nagy, D.; Aleksandrova, M.

    2016-02-01

    “Smart windows” are envisaged for future low-energy, high-efficient architectural buildings, as well as for the car industry. By switching from coloured to fully bleached state, these windows regulate the energy of solar flux entering the interior. Functional layers in these devices are the transition metals oxides. The materials (transitional metal oxides) used in smart windows can be also applied as photoelectrodes in water splitting photocells for hydrogen production or as photocatalytic materials for self-cleaning surfaces, waste water treatment and pollution removal. Solar energy utilization is recently in the main scope of numerous world research laboratories and energy organizations, working on protection against conventional fuel exhaustion. The paper presents results from research on transition metal oxide thin films, fabricated by different methods - atomic layer deposition, atmospheric pressure chemical vapour deposition, physical vapour deposition, and wet chemical methods, suitable for flowthrough production process. The lower price of the chemical deposition processes is especially important when the method is related to large-scale glazing applications. Conclusions are derived about which processes are recently considered as most prospective, related to electrochromic materials and devices manufacturing.

  9. Technologies for deposition of transition metal oxide thin films: application as functional layers in “Smart windows” and photocatalytic systems

    International Nuclear Information System (INIS)

    Gesheva, K; Ivanova, T; Bodurov, G; Szilágyi, I M; Justh, N; Kéri, O; Boyadjiev, S; Nagy, D; Aleksandrova, M

    2016-01-01

    “Smart windows” are envisaged for future low-energy, high-efficient architectural buildings, as well as for the car industry. By switching from coloured to fully bleached state, these windows regulate the energy of solar flux entering the interior. Functional layers in these devices are the transition metals oxides. The materials (transitional metal oxides) used in smart windows can be also applied as photoelectrodes in water splitting photocells for hydrogen production or as photocatalytic materials for self-cleaning surfaces, waste water treatment and pollution removal. Solar energy utilization is recently in the main scope of numerous world research laboratories and energy organizations, working on protection against conventional fuel exhaustion. The paper presents results from research on transition metal oxide thin films, fabricated by different methods - atomic layer deposition, atmospheric pressure chemical vapour deposition, physical vapour deposition, and wet chemical methods, suitable for flowthrough production process. The lower price of the chemical deposition processes is especially important when the method is related to large-scale glazing applications. Conclusions are derived about which processes are recently considered as most prospective, related to electrochromic materials and devices manufacturing. (paper)

  10. Transit transparency.

    Science.gov (United States)

    2012-07-01

    Public transit agencies have employed intelligent systems for determining : schedules and routes and for monitoring the real-time location and status of their : vehicle fleets for nearly two decades. But until recently, the data generated by : daily ...

  11. CSIR Technology Impact 2000

    CSIR Research Space (South Africa)

    CSIR

    2000-01-01

    Full Text Available This millennium issue of Technology Impact celebrates the CSIR's contributions during the transitional 1999/2000 year. It presents a rich canvas portrays technology solutions and information which have touched the lives of people both within...

  12. Energy Transition in the Nebular City: Connecting Transition Thinking, Metabolism Studies, and Urban Design

    Directory of Open Access Journals (Sweden)

    Griet Juwet

    2018-03-01

    Full Text Available Transforming urban infrastructures is an essential part of creating more sustainable urban regions. But rethinking these complex systems requires a better understanding of their spatial dimensions and their relation with urban morphology and spatial structure. This paper addresses that gap by examining different conceptualizations of technical infrastructure and space in science, technology and society studies (STS, transition thinking, urban metabolism studies, and urban political ecology, and draws connections with the spatial perspective of urban planning and design. It illustrates and tests these concepts through the case of energy transition in the Flemish region of Belgium. Transport and supply networks have played a crucial role in facilitating, structuring, and reproducing the region’s characteristic dispersed and energy-intensive urban landscape. Bringing different disciplinary perspectives together, the research broadens the conceptualization of the spatial dimension in transition thinking, and identifies useful concepts and design parameters for urban design to engage with the technical and socio-political complexity of transforming urban infrastructure. It reveals the energy transition as an inherently spatial project, and explores the spatially and socio-politically transformative potential of the transition towards a new energy system.

  13. The effects on grid matching and ramping requirements, of single and distributed PV systems employing various fixed and sun-tracking technologies

    International Nuclear Information System (INIS)

    Solomon, A.A.; Faiman, D.; Meron, G.

    2010-01-01

    In this second paper, which studies the hourly generation data from the Israel Electric Corporation for the year 2006, with a view to adding very large-scale photovoltaic power (VLS-PV) plants, three major extensions are made to the results reported in our first paper. In the first extension, PV system simulations are extended to include the cases of 1- and 2-axis sun-tracking, and 2-axis concentrator photovoltaic (CPV) technologies. Secondly, the effect of distributing VLS-PV plants among 8 Negev locations, for which hourly metrological data exist, is studied. Thirdly, in addition to studying the effect of VLS-PV on grid penetration, the present paper studies its effect on grid ramping requirements. The principal results are as follows: (i) sun-tracking improves grid matching at high but not low levels of grid flexibility; (ii) geographical distribution has little effect on grid penetration; (iii) VLS-PV significantly increases grid ramping requirements, particularly for CPV systems, but not beyond existing ramping capabilities; (iv) geographical distribution considerably ameliorates this effect.

  14. Power system technologies for the manned Mars mission

    International Nuclear Information System (INIS)

    Bents, D.; Patterson, M.J.; Berkopec, F.; Myers, I.; Presler, A.

    1986-01-01

    The high impulse of electric propulsion makes it an attractive option for manned interplanetary missions such as a manned mission to Mars. This option is, however, dependent on the availability of high energy sources for propulsive power in addition to that required for the manned interplanetary transit vehicle. Two power system technologies are presented: nuclear and solar. The ion thruster technology for the interplanetary transit vehicle is described for a typical mission. The power management and distribution system components required for such a mission must be further developed beyond today's technology status. High voltage-high current technology advancements must be achieved. These advancements are described. In addition, large amounts of waste heat must be rejected to the space environment by the thermal management system. Advanced concepts such as the liquid droplet radiator are discussed as possible candidates for the manned Mars mission. These thermal management technologies have great potential for significant weight reductions over the more conventional systems

  15. U.S. electric power sector transitions required to achieve 80% reductions in economy-wide greenhouse gas emissions: Results based on a state-level model of the U.S. energy system

    Energy Technology Data Exchange (ETDEWEB)

    Iyer, Gokul C.; Clarke, Leon E.; Edmonds, James A.; Kyle, Gordon P.; Ledna, Catherine M.; McJeon, Haewon C.; Wise, M. A.

    2017-05-01

    The United States has articulated a deep decarbonization strategy for achieving a reduction in economy-wide greenhouse gas (GHG) emissions of 80% below 2005 levels by 2050. Achieving such deep emissions reductions will entail a major transformation of the energy system and of the electric power sector in particular. , This study uses a detailed state-level model of the U.S. energy system embedded within a global integrated assessment model (GCAM-USA) to demonstrate pathways for the evolution of the U.S. electric power sector that achieve 80% economy-wide reductions in GHG emissions by 2050. The pathways presented in this report are based on feedback received during a workshop of experts organized by the U.S. Department of Energy’s Office of Energy Policy and Systems Analysis. Our analysis demonstrates that achieving deep decarbonization by 2050 will require substantial decarbonization of the electric power sector resulting in an increase in the deployment of zero-carbon and low-carbon technologies such as renewables and carbon capture utilization and storage. The present results also show that the degree to which the electric power sector will need to decarbonize and low-carbon technologies will need to deploy depends on the nature of technological advances in the energy sector, the ability of end-use sectors to electrify and level of electricity demand.

  16. What drives energy consumers? : Engaging people in a sustainable energy transition

    NARCIS (Netherlands)

    Steg, Linda; Shwom, Rachel; Dietz, Thomas

    Providing clean, safe, reliable, and affordable energy for people everywhere will require converting to an energy system in which the use of fossil fuels is minimal. A sustainable energy transition means substantial changes in technology and the engagement of the engineering community. But it will

  17. Verification and Demonstration for Transition of Nonhexavalent Chromium, Low-Volatile Organic Compound (VOC) Alternative Technologies to Replace DOD-P-15328 Wash Primer for Multimetal Applications

    Science.gov (United States)

    2017-09-28

    Technical Report 3. DATES COVERED (From - To) October 2012–September 2017 4. TITLE AND SUBTITLE Verification and Demonstration for Transition of...surfaces to protect against corrosion and improve the adhesion of the subsequent primer to the base metal. The wash primer contains hexavalent chromium (Cr...Adhesion 6 2.3 Dry Tape Adhesion 7 2.4 Pencil Hardness 8 2.5 Chip Resistance Test 8 2.6 Accelerated Corrosion Testing 10 2.7 Outdoor Exposure Testing at

  18. Transitioning to digital radiography

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, F., E-mail: Francisco.Miranda@pwc.ca [Pratt & Whitney Canada, Longueuil, Quebec (Canada)

    2015-09-15

    This article provides insight on the technical and business considerations necessary to implement or to transition to digital radiography Continued refinements in digital radiography technology have resulted in significant improvements in image quality and detectability of indications. These improvements have resulted in the acceptance of the technology by users and aerospace primes for final product inspection and disposition. Digital radiography has also been identified as an interesting cost reduction initiative with the potential of providing gains in productivity through increased throughput and decreased inspection lead-times and resulting costs. (author)

  19. LES PAYS EN TRANSITION

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cathy Egan

    En 2002, une certaine paix sociale avait été rétablie, bien qu'elle fut instable et souvent entachée de violence. Le pays amorçait le ... mieux comprendre comment il recueille et diffuse l'information destinée ... transition) et les technologies de l'information et de la communication (TIC). Les étapes suivantes ont consisté à ...

  20. Energy transition. Selective bibliography

    International Nuclear Information System (INIS)

    2015-10-01

    At the occasion of the promulgation on August 17, 2015 of law no. 2015-992 relative to energy transition, this bibliography reviews the legal, economical and political aspects of the recent evolutions in the energy domain. Basic and synthetic documents are listed first. Then follow documents dealing with: general data, energy models, sustainable agriculture, green technologies, energy conservation, waste processing, renewable energy sources, sustainable cities and buildings. The bibliography ends with a selection of relevant web sites

  1. Science and Technology Policy

    DEFF Research Database (Denmark)

    Baark, Erik

    1996-01-01

    This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years.......This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years....

  2. Realistic control considerations for electromagnetically levitated urban transit vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Billing, J R

    1976-04-01

    A discussion is given of realistic control considerations of suspension dynamics and vehicle/guideway interaction for electromagnetically-levitated urban transit vehicles in the context of revenue applications. The emphasis is on safety, reliability, and maintainability rather than performance. An example urban transit system is described, and the following considerations of dynamics and control are examined: stability, magnet force requirements, magnet airgap requirements, vehicle ride, and component failures. It is shown that it is a formidable problem to ensure suspension stability under all conditions; that operation on curves is a critical magnet and control system design case; that operation of the magnets in the non-linear regime is unavoidable and that component failures will be a major problem. However, good vehicle ride is to be expected. It is concluded that magnetic levitation suspension technology requires substantial development effort before it can be considered suitable for revenue operation.

  3. "Don't Be a Smart Arse": Social Enterprise-Based Transitional Labour-Market Programmes as Neo-Liberal Technologies of the Self

    Science.gov (United States)

    Kelly, Peter James; Campbell, Perri Bree Ellis; Harrison, Lyn

    2015-01-01

    In this paper we re-visit the work of celebrity chef Jamie Oliver and the social enterprise Fifteen Foundation and their development of a programme designed to train unemployed young people in the hospitality industry. We argue, drawing on the Foucauldian literature on governmentality and technologies of the self, that social enterprise-based…

  4. US activities on fuel cycle transition scenarios

    International Nuclear Information System (INIS)

    McCarthy, Kathryn A.

    2010-01-01

    Countries with active nuclear programmes typically have as a goal transition to a closed fuel cycle. A closed fuel cycle enables long-term sustainability, provides waste management benefits, and as a system, can reduce overall proliferation risk. This transition will take many decades, thus the study of the actual transition is an important topic. The United States systems analysis activities as part of the Advanced Fuel Cycle Initiative (AFCI) provide the integrating analyses for the fuel cycle programme, and recent activities are focusing on transition options, and specifically, the dynamics of the transition. The United States is still studying both one-tier (recycling in fast reactors only) and two-tier (recycling in both thermal and fast reactors) systems, and the systems analysis activities provide insight into the trade-offs associated with the systems, and variations of each. Most recently, a series of sensitivity studies have been completed which provide insight into the behaviour of a transition system. These studies evaluate the impact of changing various parameters in the fuel cycle system, and provide insight into how the system will change as parameters change. Because these deployment analyses look at the development of nuclear energy systems over a long period of time, it is very unlikely that we will accurately predict the system's characteristics over time (for example, growth in electricity demand, how quickly nuclear reactors will be deployed, how many fast rectors versus thermal reactors, the conversion ratio of the fast reactors, etc.). How the system will develop will depend on a variety of factors, ranging from political to technical, rational to irrational. Because we cannot accurately predict the future, we need to understand how things could change, and what impact those changes have. Analyses of future fuel cycle systems require a number of assumptions. These include growth rates for nuclear energy, general architecture of fuel cycle

  5. Development of design technology on thermal-hydraulic performance in tight-lattice rod bundles. II-rod bowing effect on boiling transition

    International Nuclear Information System (INIS)

    Liu, Wei; Tamai, Hidesada; Kureta, Masatoshi; Ohnuki, Akira; Takase, Kazuyuki; Akimoto, Hajime

    2007-01-01

    A thermal-hydraulic feasibility project for an Innovative Water Reactor for Flexible fuel cycle (FLWR) has been performed since 2002. In this R and D project, large-scale thermal-hydraulic tests, several model experiments and development of advanced numerical analysis codes have been carried out. In this paper, we will describe the critical power characteristics in a 37-rod tight-lattice bundle with rod-bowing under both steady and transient states. It is observed that no matter it is run under a steady or a transient state, boiling transition (BT) always occurs axially at exit elevation of upper high-heat-flux region and transversely in the central area of the bundle. Steady critical power increases monotonically with the increase of mass velocity, with the decrease of inlet water temperature and with the decrease of exit pressure. These trends are same as those in the base case test without rod-bowing. The steady critical power with rod-bowing is about 10% lower than that without rod-bowing. For the postulated power increase and flow decrease cases that may be possibly met in a normal operation of the FLWR, it is confirmed that no BT occurs when Initial Critical Power Ratio (ICPR) is 1.3. Moreover, when the transitions are run under severer ICPR that causes BT, the transient critical powers are generally same as the steady ones. The experiments are analyzed with TRAC-BF1 code. The TRAC-BF1 code shows good prediction for the occurrence or the non occurrence of the BT and predicts the BT starting time within the accuracy of critical power correlation. Traditional quasi - steady state prediction of the transient BT is confirmed being applicable for the postulated abnormal transient processes in the tight lattice bundle with rod - bowing. (author)

  6. Sustainability and deliberate transition of socio-technical systems

    DEFF Research Database (Denmark)

    Hansen, Ole Erik; Søndergård, Bent; Stærdahl, Jens

    or developing socio-technical systems in order to integrate the concept of sustainability as a driver for the deliberate and purposeful shaping and transition. The article discusses the requirements to effective governance networks and governing of governance networks. Research within innovation systems......The article suggests that deliberate planning for sustainability demands a focus on the transition of socio-technical systems in order to establish robust and more sustainable patterns of production and consumption. This implies the necessity of a new perspective for environmental planning......, transition management and technology systems combined with planning and experimental activities provides both a theoretical and empirical body of knowledge of such governance processes. The article discusses how this perspective can be used in relation to the process of developing bio-fuel systems...

  7. Trust Transitivity in Social Networks

    OpenAIRE

    Richters, Oliver; Peixoto, Tiago P.

    2011-01-01

    Non-centralized recommendation-based decision making is a central feature of several social and technological processes, such as market dynamics, peer-to-peer file-sharing and the web of trust of digital certification. We investigate the properties of trust propagation on networks, based on a simple metric of trust transitivity. We investigate analytically the percolation properties of trust transitivity in random networks with arbitrary in/out-degree distributions, and compare with numerical...

  8. Lander Technologies

    Science.gov (United States)

    Chavers, Greg

    2015-01-01

    Since 2006 NASA has been formulating robotic missions to the lunar surface through programs and projects like the Robotic Lunar Exploration Program, Lunar Precursor Robotic Program, and International Lunar Network. All of these were led by NASA Marshall Space Flight Center (MSFC). Due to funding shortfalls, the lunar missions associated with these efforts, the designs, were not completed. From 2010 to 2013, the Robotic Lunar Lander Development Activity was funded by the Science Mission Directorate (SMD) to develop technologies that would enable and enhance robotic lunar surface missions at lower costs. In 2013, a requirements-driven, low-cost robotic lunar lander concept was developed for the Resource Prospector Mission. Beginning in 2014, The Advanced Exploration Systems funded the lander team and established the MSFC, Johnson Space Center, Applied Physics Laboratory, and the Jet Propulsion Laboratory team with MSFC leading the project. The lander concept to place a 300-kg rover on the lunar surface has been described in the New Technology Report Case Number MFS-33238-1. A low-cost lander concept for placing a robotic payload on the lunar surface is shown in figures 1 and 2. The NASA lander team has developed several lander concepts using common hardware and software to allow the lander to be configured for a specific mission need. In addition, the team began to transition lander expertise to United States (U.S.) industry to encourage the commercialization of space, specifically the lunar surface. The Lunar Cargo Transportation and Landing by Soft Touchdown (CATALYST) initiative was started and the NASA lander team listed above is partnering with three competitively selected U.S. companies (Astrobotic, Masten Space Systems, and Moon Express) to develop, test, and operate their lunar landers.

  9. Understanding human movement through spatial technologies. The role of natural areas of transit in the Late Prehistory of South-western Iberia

    Directory of Open Access Journals (Sweden)

    Murrieta-Flores, Patricia

    2012-06-01

    Full Text Available Archaeological, historical, and ethnographic research has demonstrated how mountainous environments influence the socio-cultural dynamics of the communities that live in them and in their neighbouring areas. The development of these communities tends to occur at the margins, often far away from centres of political power. This marginality is also extended to movement in these regions, where mountain ranges regularly constitute mighty obstacles on account of their natural configuration which plays a central role in strategy, commerce and travelling. In the case of western Sierra Morena in Spain, its constitution shaped both the ways of transit through the mountains during Later Prehistory and the historical routes of communication that traverse Andalucía. Using a GIS methodology developed specifically to identify particular characteristics of the landscape relevant to human movement, such as passageways, crossing points, and natural areas of transit, we examine the role that natural accessibility had for the late prehistoric societies of this region. We conclude that the location of their habitats and symbolic places are strongly related to corridors, possibly due to an increasing importance of herding activities.

    Investigaciones arqueológicas, históricas y etnográficas han demostrado como los ambientes de montaña tienen una profunda influencia en las dinámicas socioculturales de las comunidades que viven en ellos y en sus áreas vecinas. El desarrollo de estas sociedades tiende a producirse en los márgenes, usualmente lejos de los centros de poder político. Esta marginación se extiende también a la circulación en estas regiones, donde las cordilleras suelen constituir poderosos obstáculos debido a su configuración natural que juega un papel central en sus estrategias, comercio y movimiento humano. Durante la Prehistoria Reciente, la constitución de Sierra Morena Occidental (España moldeó tanto las vías de tránsito a trav

  10. Metal-insulator transitions

    Science.gov (United States)

    Imada, Masatoshi; Fujimori, Atsushi; Tokura, Yoshinori

    1998-10-01

    Metal-insulator transitions are accompanied by huge resistivity changes, even over tens of orders of magnitude, and are widely observed in condensed-matter systems. This article presents the observations and current understanding of the metal-insulator transition with a pedagogical introduction to the subject. Especially important are the transitions driven by correlation effects associated with the electron-electron interaction. The insulating phase caused by the correlation effects is categorized as the Mott Insulator. Near the transition point the metallic state shows fluctuations and orderings in the spin, charge, and orbital degrees of freedom. The properties of these metals are frequently quite different from those of ordinary metals, as measured by transport, optical, and magnetic probes. The review first describes theoretical approaches to the unusual metallic states and to the metal-insulator transition. The Fermi-liquid theory treats the correlations that can be adiabatically connected with the noninteracting picture. Strong-coupling models that do not require Fermi-liquid behavior have also been developed. Much work has also been done on the scaling theory of the transition. A central issue for this review is the evaluation of these approaches in simple theoretical systems such as the Hubbard model and t-J models. Another key issue is strong competition among various orderings as in the interplay of spin and orbital fluctuations. Experimentally, the unusual properties of the metallic state near the insulating transition have been most extensively studied in d-electron systems. In particular, there is revived interest in transition-metal oxides, motivated by the epoch-making findings of high-temperature superconductivity in cuprates and colossal magnetoresistance in manganites. The article reviews the rich phenomena of anomalous metallicity, taking as examples Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Ru compounds. The diverse phenomena include strong spin and

  11. Accelerating technological change. Towards a more sustainable transport system

    NARCIS (Netherlands)

    van der Vooren, A.

    2014-01-01

    This thesis provides insights into the mechanisms of technological change by capturing the complexity that characterises the current technological transition of the transport system into existing evolutionary models of technological change. The transition towards a more sustainable transport system

  12. Innovative Competencies of Mining engineers in Transition to the Sustainable Development

    Science.gov (United States)

    Krechetov, Andrey; Khoreshok, Alexey; Blumenstein, Valery

    2017-11-01

    The transition to the sustainable development posed new challenges to the system of mining higher education. They are determined by the acceleration of scientific and technological progress and widespread introduction of innovations, convergence of technologies from various industries. On the one hand, globalization and rapid technology development are constantly increasing quality requirements for the labor resources of the mineral and raw materials complex and constant improvement of their skills. On the other hand, the transition to the sustainable development provides the necessity for rational use of raw materials and environmental protection. This requires the improvement of staff support system for mining operations and the interaction of enterprises with universities training mining engineers, aimed at the innovative competencies development of future miners.

  13. Electroweak phase transitions

    International Nuclear Information System (INIS)

    Anderson, G.W.

    1991-01-01

    An analytic treatment of the one Higgs doublet, electroweak phase transition is given. The phase transition is first order, occurs by the nucleation of thin walled bubbles and completes at a temperature where the order parameter, left-angle φ right-angle T is significantly smaller than it is when the origin becomes absolutely unstable. The rate of anomalous baryon number violation is an exponentially function of left-angle φ right-angle T . In very minimal extensions of the standard model it is quite easy to increase left-angle φ right-angle T so that anomalous baryon number violation is suppressed after completion of the phase transition. Hence baryogenesis at the electroweak phase transition is tenable in minimal of the standard model. In some cases additional phase transitions are possible. For a light Higgs boson, when the top quark mass is sufficiently large, the state where the Higgs field has a vacuum expectation value left-angle φ right-angle = 246 GeV is not the true minimum of the Higgs potential. When this is the case, and when the top quark mass exceeds some critical value, thermal fluctuations in the early universe would have rendered the state left-angle φ right-angle = 246 GeV unstable. The requirement that the state left-angle φ right-angle = 246 GeV is sufficiently long lived constrains the masses of the Higgs boson and the top quark. Finally, we consider whether local phase transitions can be induced by heavy particles which act as seeds for deformations in the scalar field

  14. Transit space

    DEFF Research Database (Denmark)

    Raahauge, Kirsten Marie

    2008-01-01

    This article deals with representations of one specific city, Århus, Denmark, especially its central district. The analysis is based on anthropological fieldwork conducted in Skåde Bakker and Fedet, two well-off neighborhoods. The overall purpose of the project is to study perceptions of space...... and the interaction of cultural, social, and spatial organizations, as seen from the point of view of people living in Skåde Bakker and Fedet. The focus is on the city dwellers’ representations of the central district of Århus with specific reference to the concept of transit space. When applied to various Århusian...

  15. Transition region

    International Nuclear Information System (INIS)

    Jordan, C.

    1977-01-01

    The Glossary is designed to be a technical dictionary that will provide solar workers of various specialties, students, other astronomers and theoreticians with concise information on the nature and the properties of phenomena of solar and solar-terrestrial physics. Each term, or group of related terms, is given a concise phenomenological and quantitative description, including the relationship to other phenomena and an interpretation in terms of physical processes. The references are intended to lead the non-specialist reader into the literature. This section deals with: transition region; di-electronic recombination; intersystem or intercombination lines; satellite lines; grazing-incidence optics; and crystal spectrometers. (B.R.H.)

  16. 7th Annual Science and Engineering Technology Conference/DoD Technology Exposition Volume 1

    Science.gov (United States)

    2006-04-20

    Disruptive Technologies • Army Approach to Disruptive Technologies and Transition Mr. Dennis Schmidt, Director, Science & Technology Integration, Office of...the Assistant Secretary of the Army for Research and Technology • Navy Approach to Disruptive Technologies and Transition Mr. Lewis DeSandre, Program...Manager, ONR 351 • Air Force Approach to Disruptive Technologies and Transition Colonel Mark Stephen, Associate Deputy Assistant Secretary (Science

  17. Annual Science and Engineering Technology Conference/DOD Technology Exposition (7th). Volume 2. Wednesday - Thursday

    Science.gov (United States)

    2006-04-20

    Disruptive Technologies • Army Approach to Disruptive Technologies and Transition Mr. Dennis Schmidt, Director, Science & Technology Integration, Office of...the Assistant Secretary of the Army for Research and Technology • Navy Approach to Disruptive Technologies and Transition Mr. Lewis DeSandre, Program...Manager, ONR 351 • Air Force Approach to Disruptive Technologies and Transition Colonel Mark Stephen, Associate Deputy Assistant Secretary (Science

  18. Competence and lastingness in specialized clinical laboratories: technical report about requirements concerning quality of users competence and used processes in immunochemical diagnostic procedures using isotopic and non-isotopic tracer technologies

    International Nuclear Information System (INIS)

    Wiegel, B.

    2005-01-01

    From the citizens view this technical report about immunochemical diagnostic procedures using radioactive and nonradioactive tracer technologies describes the requirements in special laboratory diagnostics concerning competency and process control. Governmental or administrational obligations of inspecting both skill and sites to guarantee patients security are pointed out. (orig.)

  19. Prospects for sustainable development of the nickel industry of Russia in conditions of transition in the world economy to the new technological mode

    Directory of Open Access Journals (Sweden)

    Stolbov A. G.

    2016-06-01

    Full Text Available The essence of new technological mode in the world economy, some features of innovative development of the mineral complex and the nickel industry, dynamics of world production and consumption of nickel have been considered. The organization and economic structure of the nickel industry in Russia has been characterized. The prospects for sustainable development of the nickel industry in conditions of the sixth technological mode have been justified. Рассмотрены сущность нового технологического уклада в мировой экономике, особенности инновационного развития минерально-сырьевого комплекса и никелевой промышленности, динамика мирового производства и потребления никеля. Дана характеристика организационно-экономической структуры никелевой промышленности России. Обоснованы перспективы устойчивого развития никелевой промышленности в условиях шестого технологического уклада

  20. FTA real-time transit information assessment : white paper on literature review of real-time transit information systems.

    Science.gov (United States)

    Real-time transit information systems are key technology applications within the transit industry designed to provide better customer service by disseminating timely and accurate information. Riders use this information to make various decisions abou...

  1. The transition of mouse pluripotent stem cells from the naïve to the primed state requires Fas signaling through 3-O sulfated heparan sulfate structures recognized by the HS4C3 antibody

    Energy Technology Data Exchange (ETDEWEB)

    Hirano, Kazumi [Laboratory of Cell Biology, Department of Bioinformatics, Faculty of Engineering, Soka University, 1-236 Tangi-cho, Hachioji, Tokyo 192-8577 (Japan); Van Kuppevelt, Toin H. [Department of Biochemistry, Nijmegen Center for Molecular Life Sciences, Radboud University Nijmegen Medical Centre, 280 P.O. Box 9101, 6500 HB Nijmegen (Netherlands); Nishihara, Shoko, E-mail: shoko@soka.ac.jp [Laboratory of Cell Biology, Department of Bioinformatics, Faculty of Engineering, Soka University, 1-236 Tangi-cho, Hachioji, Tokyo 192-8577 (Japan)

    2013-01-18

    Highlights: ► Fas transcript increases during the transition from the naïve to the primed state. ► 3OST-5 transcript, the HS4C3 epitope synthesis gene, increases during the transition. ► Fas signaling regulates the transition from the naïve to the primed state. ► HS4C3-binding epitope regulates the transition from the naïve to the primed state. ► Fas signaling is regulated by the HS4C3 epitope during the transition. -- Abstract: The characteristics of pluripotent embryonic stem cells of human and mouse are different. The properties of human embryonic stem cells (hESCs) are similar to those of mouse epiblast stem cells (mEpiSCs), which are in a later developmental pluripotency state, the so-called “primed state” compared to mouse embryonic stem cells (mESCs) which are in a naïve state. As a result of the properties of the primed state, hESCs proliferate slowly, cannot survive as single cells, and can only be transfected with genes at low efficiency. Generating hESCs in the naïve state is necessary to overcome these problems and allow their application in regenerative medicine. Therefore, clarifying the mechanism of the transition between the naïve and primed states in pluripotent stem cells is important for the establishment of stable methods of generating naïve state hESCs. However, the signaling pathways which contribute to the transition between the naïve and primed states are still unclear. In this study, we carried out induction from mESCs to mEpiSC-like cells (mEpiSCLCs), and observed an increase in the activation of Fas signaling during the induction. The expression of Fgf5, an epiblast marker, was diminished by inhibition of Fas signaling using the caspase-8 and -3 blocking peptides, IETD and DEVD, respectively. Furthermore, during the induction, we observed increased expression of 3-O sulfated heparan sulfate (HS) structures synthesized by HS 3-O-sulfotransferase (3OST), which are recognized by the HS4C3 antibody (HS4C3-binding epitope

  2. The transition of mouse pluripotent stem cells from the naïve to the primed state requires Fas signaling through 3-O sulfated heparan sulfate structures recognized by the HS4C3 antibody

    International Nuclear Information System (INIS)

    Hirano, Kazumi; Van Kuppevelt, Toin H.; Nishihara, Shoko

    2013-01-01

    Highlights: ► Fas transcript increases during the transition from the naïve to the primed state. ► 3OST-5 transcript, the HS4C3 epitope synthesis gene, increases during the transition. ► Fas signaling regulates the transition from the naïve to the primed state. ► HS4C3-binding epitope regulates the transition from the naïve to the primed state. ► Fas signaling is regulated by the HS4C3 epitope during the transition. -- Abstract: The characteristics of pluripotent embryonic stem cells of human and mouse are different. The properties of human embryonic stem cells (hESCs) are similar to those of mouse epiblast stem cells (mEpiSCs), which are in a later developmental pluripotency state, the so-called “primed state” compared to mouse embryonic stem cells (mESCs) which are in a naïve state. As a result of the properties of the primed state, hESCs proliferate slowly, cannot survive as single cells, and can only be transfected with genes at low efficiency. Generating hESCs in the naïve state is necessary to overcome these problems and allow their application in regenerative medicine. Therefore, clarifying the mechanism of the transition between the naïve and primed states in pluripotent stem cells is important for the establishment of stable methods of generating naïve state hESCs. However, the signaling pathways which contribute to the transition between the naïve and primed states are still unclear. In this study, we carried out induction from mESCs to mEpiSC-like cells (mEpiSCLCs), and observed an increase in the activation of Fas signaling during the induction. The expression of Fgf5, an epiblast marker, was diminished by inhibition of Fas signaling using the caspase-8 and -3 blocking peptides, IETD and DEVD, respectively. Furthermore, during the induction, we observed increased expression of 3-O sulfated heparan sulfate (HS) structures synthesized by HS 3-O-sulfotransferase (3OST), which are recognized by the HS4C3 antibody (HS4C3-binding epitope

  3. A New Approach for Determining Onset of Transition

    Science.gov (United States)

    Hassan, H. A.; Warren, E. S.

    1997-01-01

    The final report consists of three papers which outline and demonstrate the new method for determining transition onset. The procedure developed under this grant requires specification of the instability mechanism, i.e., Tollmien-Schlichting or crossflow, that leads to transition. The attached papers are entitled: 'An Alternative to the e(sup n) Method for Determining Onset of Transition', 'Transition Model for Swept Wing Flows', and 'A Transition Closure Model for Predicting Transition Onset'.

  4. Sustainable Transition

    DEFF Research Database (Denmark)

    Hansen, Ole Erik; Søndergård, Bent

    2014-01-01

    of agendas/vision, technologies, actors and institutions in the emergent design of an urban mobility system based on an electric car sharing system. Why. Designing for sustainability is a fundamental challenge for future design practices; designers have to obtain an ability to contribute to sustainable...

  5. TECHNOLOGY ROADMAPPING FOR IAEA SEALS.

    Energy Technology Data Exchange (ETDEWEB)

    HOFFHEINS,B.; ANNESE,C.; GOODMAN,M.; OCONNOR,W.; GUSHUE,S.; PEPPER,S.

    2003-07-13

    In the fall of 2002, the U.S. Support Program (USSP) initiated an effort to define a strategy or ''roadmap'' for future seals technologies and to develop a generalized process for planning safeguards equipment development, which includes seals and other safeguards equipment. The underlying objectives of the USSP include becoming more proactive than reactive in addressing safeguards equipment needs, helping the IAEA to maintain an inventory of cost-effective, reliable, and effective safeguards equipment, establishing a long-term planning horizon, and securing IAEA ownership in the process of effective requirements definition and timely transitioning of new or improved systems for IAEA use. At an initial workshop, seals, their functions, performance issues, and future embodiments were discussed in the following order: adhesive seals, metal seals, passive and active loop seals, ultrasonic seals, tamper indicating enclosures (including sample containers, equipment enclosures, and conduits). Suggested improvements to these technologies focused largely on a few themes: (1) The seals must be applied quickly, easily, and correctly; (2) Seals and their associated equipment should not unduly add bulk or weight to the inspectors load; (3) Rapid, in-situ verifiability of seals is desirable; and (4) Seal systems for high risk or high value applications should have two-way, remote communications. Based upon these observations and other insights, the participants constructed a skeletal approach for seals technology planning. The process begins with a top-level review of the fundamental safeguards requirements and extraction of required system features, which is followed by analysis of suitable technologies and identification of technology gaps, and finally by development of a planning schedule for system improvements and new technology integration. Development of a comprehensive procedure will require the partnership and participation of the IAEA. The

  6. CIEMAT analyses of transition fuel cycle scenarios

    International Nuclear Information System (INIS)

    Alvarez-Velarde, F.; Gonzalez-Romero, E.M.

    2010-01-01

    The efficient design of strategies for the long-term sustainability of nuclear energy or the phase-out of this technology is possible after the study of transition scenarios from the current fuel cycle to a future one with advanced technologies and concepts. CIEMAT has participated in numerous fuel cycle scenarios studies for more than a decade and, from some years ago, special attention has been put in the study of transition scenarios. In this paper, the main characteristics of each studied transition scenario are described. The main results and partial conclusions of each scenario are also analyzed. As general conclusions of transition studies, we highlight that the advantages of advanced technologies in transition scenarios can be obtained by countries or regions with sufficiently large nuclear parks, with a long-term implementation of the strategy. For small countries, these advantages are also accessible with an affordable cost, by means of the regional collaboration during several decades. (authors)

  7. Non-Transitive Consumer Behavior

    OpenAIRE

    Fuchs-Seliger, Susanne

    2006-01-01

    Rational choice when preferences are not required to be transitive and complete has been discussed in the literature for years. In this article transitivity and completeness of the preference relation is also not assumed. It will be shown that nevertheless the existence of a competitive equilibrium can be proven when those properties are replaced by a domination property which allows that there could be cicles among those alternatives which are of less importance for the individual and which ...

  8. What Types of Instructional Shifts Do Students Experience? Investigating Active Learning in Science, Technology, Engineering, and Math Classes across Key Transition Points from Middle School to the University Level

    Directory of Open Access Journals (Sweden)

    Kenneth Akiha

    2018-01-01

    Full Text Available Despite the need for a strong Science, Technology, Engineering, and Math (STEM workforce, there is a high attrition rate for students who intend to complete undergraduate majors in these disciplines. Students who leave STEM degree programs often cite uninspiring instruction in introductory courses, including traditional lecturing, as a reason. While undergraduate courses play a critical role in STEM retention, little is understood about the instructional transitions students encounter upon moving from secondary to post-secondary STEM courses. This study compares classroom observation data collected using the Classroom Observation Protocol for Undergraduate STEM from over 450 middle school, high school, introductory-level university, and advanced-level university classes across STEM disciplines. We find similarities between middle school and high school classroom instruction, which are characterized by a large proportion of time spent on active-learning instructional strategies, such as small-group activities and peer discussion. By contrast, introductory and advanced university instructors devote more time to instructor-centered teaching strategies, such as lecturing. These instructor-centered teaching strategies are present in classes regardless of class enrollment size, class period length, or whether or not the class includes a separate laboratory section. Middle school, high school, and university instructors were also surveyed about their views of what STEM instructional practices are most common at each educational level and asked to provide an explanation of those perceptions. Instructors from all levels struggled to predict the level of lecturing practices and often expressed uncertainty about what instruction looks like at levels other than their own. These findings suggest that more opportunities need to be created for instructors across multiple levels of the education system to share their active-learning teaching practices and

  9. Mathematical modeling for optimizing skip-stop rail transit operation strategy using genetic algorithm.

    Science.gov (United States)

    2012-03-01

    "With skip-stop rail transit operation, transit agencies can reduce their operating costs and fleet size, : and passengers can experience reduced in-transit travel times without extra track and technological : improvement. However, since skip-stop op...

  10. Energy transition

    International Nuclear Information System (INIS)

    Anon.

    2013-01-01

    The yearly environmental conference will hold on September 2013 to evaluate the negotiations led at the national and local levels for december 2012. The government will have then to decide of an energy programming bill which will be submitted to the Parliament at the beginning of the year 2014. 30 main propositions have emerged of the decentralised debates. One of them is the ecological taxation which raise the question of the gas oil and petrol taxation. The current environmental taxes are for almost three quarters of them taxes on energy consumptions and mainly on fossil energies. The Economic, Social and Environmental Council, gives his opinion on the way to find resources to ensure the ecological and energy transition while reducing the public deficit of the State. (O.M.)

  11. Technology alliances

    International Nuclear Information System (INIS)

    Torgerson, D.F.; Boczar, P.G.; Kugler, G.

    1991-10-01

    In the field of nuclear technology, Canada and Korea developed a highly successful relationship that could serve as a model for other high-technology industries. This is particularly significant when one considers the complexity and technical depth required to design, build and operate a nuclear reactor. This paper will outline the overall framework for technology transfer and cooperation between Canada and Korea, and will focus on cooperation in nuclear R and D between the two countries

  12. Energy transition in France

    International Nuclear Information System (INIS)

    Grandjean, Alain

    2014-01-01

    After having recalled the main issues and stakes addressed by the French national debate on energy transition (strategic stakes, priority to a reduction of French energy consumption, options for the evolution of the French energy mix), the author comments the possible evolution of energy prices and of the energy taxing policy (evolution of oil prices, carbon price). In a second part, the author addresses the issue of financing of building and housing renovation. He shows that this operation cannot be only based on financial markets which are not efficient. This means that a public intervention is required, and different solutions are then possible. Some of them seem difficult to implement (creation of money by the central Bank, creation of a public bank which could lend money to private actors), and some others need to be further examined (creation of a financing company for energy transition, use of national savings, simplified circuits for a financing of local projects by local savings, and so on)

  13. Biodiesel fuel management best practices for transit

    Science.gov (United States)

    2007-11-27

    Public transportation systems play a key role throughout the country not only in providing vital services to citizens but also in the environmental quality of our communities. Transit systems nationwide are seeking out new technologies in order to in...

  14. Transition in the nuclear industry

    International Nuclear Information System (INIS)

    Olyniec, J.H.

    1985-01-01

    Not long ago, nuclear energy was forecast to be the dominant force in the utility industry. An environmentally safe clean and inexpensive way to produce electricity would be welcomed by all. Civil engineering challenges on the leading edge of technology awaited the designer and constructor. As we now know, changes within the past 10 years have taken place that radically alter this outlook. Energy demand, thought to be ever increasing, was shocked by the rising costs. Plant construction delays, coupled with ever increasing regulatory requirements and higher interest rates, fueled the spiral or more cost. Economy of operation became overwhelmed by utility debt burden. Where is the nuclear utility industry now and what direction can we foresee. this symposium addresses the nuclear industry past, present, and future. The first session highlights some lessons learned from past experiences that must be applied in the future to be beneficial. Existing and future challenges are presented in the sessions on plant modifications and nuclear waste and decommissioning. The final session looks at the nuclear industry in transition from the perspectives of the different segments that make up the industry

  15. A low carbon industrial revolution? Insights and challenges from past technological and economic transformations

    International Nuclear Information System (INIS)

    Pearson, Peter J.G.; Foxon, Timothy J.

    2012-01-01

    Recent efforts to promote a transition to a low carbon economy have been influenced by suggestions that a low carbon transition offers challenges and might yield economic benefits comparable to those of the previous industrial revolutions. This paper examines these arguments and the challenges facing a low carbon transition, by drawing on recent thinking on the technological, economic and institutional factors that enabled and sustained the first (British) industrial revolution, and the role of ‘general purpose technologies’ in stimulating and sustaining this and subsequent industrial transformation processes that have contributed to significant macroeconomic gains. These revolutions involved profound, long drawn-out changes in economy, technology and society; and although their energy transitions led to long-run economic benefits, they took many decades to develop. To reap significant long-run economic benefits from a low carbon transition sooner rather than later would require systemic efforts and incentives for low carbon innovation and substitution of high-carbon technologies. We conclude that while achieving a low carbon transition may require societal changes on a scale comparable with those of previous industrial revolutions, this transition does not yet resemble previous industrial revolutions. A successful low carbon transition would, however, amount to a different kind of industrial revolution. - Highlights: ► Investigates lessons for a low carbon transition from past industrial revolutions. ► Explores the implications of ‘general purpose technologies’ and their properties. ► Examines analysis of ‘long waves’ of technological progress and diffusion. ► Draws insights for low carbon transitions and policy.

  16. Coal, an energy for the future: Energy transition - Promises difficult to be kept; Asset repurchasing - those who still believe in it; Technologies - in the pursuit of green coal; Interview 'Coal will still be here in 2040'

    International Nuclear Information System (INIS)

    Cognasse, Olivier; Delamarche, Myrtille; Dupin, Ludovic

    2017-01-01

    A first article evokes the recent evolution of world coal demand which is notably due to its ban in some European countries, and to its decrease in China for environmental reasons and in the USA for economic reasons (emergence of shale gas). However, the demand is still increasing in India, in South-East Asia and in Africa. The article also evokes the difficulties of banks and governments to implement their commitments to phase out coal, and outlines that some emerging countries are able to implement a better transition. As the main European energy utilities are committed in phasing out coal, a second article evokes various purchases of coal plants made by other actors (utilities or investors) in different countries. The third article proposes an overview of technological efforts and achievements to reduce CO_2 emissions by coal plants (super-critical and ultra-critical plants, projects of carbon capture and storage). The next article presents the case of the German RDK8 supercritical coal plant which, as other new German coal plants, implements new technologies to improve its efficiency. An article proposes an overview of the various carbon and particle emissions and water pollution associated with the different stages of coal use, from its extraction to its use in the most modern thermal plants. Finally, an expert comments in an interview the general trend of thermal coal, the shutting down of Chinese installations and the evolution of Chinese consumption, and expected evolutions in other Asian countries, in the USA and in Europe. She outlines that coal will still be present in 2040

  17. System Operations Studies for Automated Guideway Transit Systems : Discrete Event Simulation Model Programmer's Manual

    Science.gov (United States)

    1982-07-01

    In order to examine specific automated guideway transit (AGT) developments and concepts, UMTA undertook a program of studies and technology investigations called Automated Guideway Transit Technology (AGTT) Program. The objectives of one segment of t...

  18. On Determinism in Modal Transition Systems

    DEFF Research Database (Denmark)

    Benes, Nikola; Kretinsky, Jan; Larsen, Kim Guldstrand

    2009-01-01

    Modal transition systems (MTS) is a formalism which extends the classical notion of labelled transition systems by introducing transitions of two types: must transitions that have to be present in any implementation of the MTS and may transitions that are allowed but not required. The MTS framewo....... In the present article, we provide a comprehensive account of the MTS framework in the deterministic setting. We study a number of problems previously considered on MTS and point out to what extend we can expect better results under the restriction of determinism....

  19. Safety issues in urban transit facilities for hydrogen-fueled buses

    International Nuclear Information System (INIS)

    Hay, R.H.; Ducharme, P.

    2004-01-01

    'Full text:' The Canadian Transportation Fuel Cell Alliance (CTFCA), created by the Canadian Government as part of its 2000 Climate Change Action Plan, has commissioned MARCON-DDM's Hydrogen Intervention Team (HIT) to provide a roadmap for urban transit systems that wish to move to hydrogen fuel cell-powered bus fleets. HIT is currently in the process of gathering information from hydrogen technology providers, bus manufacturers, fuelling system providers and urban transit systems in Canada, the US and Europe. In September, HIT will be in a position to provide a hands-on perspective of the introduction of fuel-cell buses in the Canadian environment. Part of the process of adding hydrogen-fueled busses to urban transit systems involves phasing in the new technology to minimize the economic cost. This involves substituting hydrogen buses into the normal bus procurement life cycle and maximizing the use of existing facilities for garaging, maintenance and fueling. Using a schematic outline of an urban transit system, this presentation will outline the safety issues specific to hydrogen in such systems, particularly for garaging, maintenance and fueling components. It will then outline how safety of these component is addressed in current and proposed codes, standards and recommended practices. Based on these requirements the impact of the introduction of hydrogen-fueled buses on each component of the transit system will be addressed in terms of the adaptations of current facilities and practices or the requirements for new facilities and practices. (author)

  20. The Sociocultural Factors That Influenced the Success of Non-Traditional, Latina, Pre-Service Teachers in a Required Online Instructional Media and Technology Course

    Science.gov (United States)

    Hernandez Reyes, Christine M.

    2013-01-01

    Home computer ownership and Internet access have become essential to education, job security and economic opportunity. The digital divide, the gap between those who can afford and can use computer technologies remains greatest for ethnic/racial groups placing them at a disadvantage for economic and educational opportunities. The purpose of the…

  1. A Field Study on the Approach of Small and Medium Enterprises (SMEs to the Information and Communication Technologies and Its Required Skills

    Directory of Open Access Journals (Sweden)

    Orhan Koçak

    2011-09-01

    Full Text Available Small and Medium Enterprises (SMEs are the main driver of a country’s economic growth. SMEs are thought to be an important source and factor in job creation and they provide flexible working opportunities for the white collar workers. The importance of the SMEs is growing since they have an important impact on the economy which is recently in crises. The rising unemployment rates of the countries cause many social and economic problems in the world. Therefore, SMEs, as an engine in economies, should be studied in terms of their adaption of new technologies which are the most important means to enter new markets and create new jobs. With the globalization, SMEs couldn’t go beyond their national borders as much as big companies did and lagged behind of the new global markets. To be able to reach new customers who are far from their countries and to compete with their rivals in both national and international arena, SMEs should adapt to the information and communication technologies. These technologies make them faster and stronger by establishing new channels, reducing time to market, providing opportunities to work more flexible and creating new jobs. In order to catch up with these new developments, which make the firms more competitive, SMEs should consider the ICTs as a strategic integral part. In this study, it is aimed to find out to what extend small and medium companies use information technologies, if they integrate these technologies into their business processes, cut their costs by using ICTs and want to invest more for information technologies. In this work, the subject is separated into 2 sections. In the first section, the literature is reviewed and some explanations and examples are given from the world and Turkey. In the second section of the study, the survey is used to find answers to the questions mentioned above in relation to SMEs and their integration with information and communication technologies. This survey was

  2. Renewable Energy Policies in a Time of Transition

    International Nuclear Information System (INIS)

    Murdock, Hannah E.; Adib, Rana; Lins, Christine; Guerra, Flavia; Misra, Archita; Murdock, Hannah E.; Vickery, Louise; Collier, Ute; Le Feuvre, Pharoah; Bianco, Emanuele; Mueller, Simon; Philibert, Cedric; Schmidt, Oliver; Kvarnstroem, Oskar; Collier, Ute; Hungerford, Zoe; Frankl, Paolo; Bianco, Emanuele; Hawila, Diala; Ferroukhi, Rabia; Hawila, Diala; Renner, Michael; Nagpal, Divyam; Cox, Sadie; Esterly, Sean; Priesmann, Caspar; Taylor, Hadley; Breitschopf, Barbara; Van Rooijen, Sascha

    2018-01-01

    Spurred by innovation, increased competition, and policy support in a growing number of countries, renewable energy technologies have achieved massive technological advances and sharp cost reductions. Renewables have come to the forefront of the global energy transition, with nearly every country adopting a renewable energy target. Yet progress has been uneven in different countries and sectors. Technology and financial risks still hamper the expansion of renewables into new markets. As the power sector develops further, the increased adoption of variable renewables like solar and wind requires more flexible systems. Compared to power generation, the regulatory framework for end-use sectors lags behind. This report, prepared jointly by the International Renewable Energy Agency (IRENA), the International Energy Agency (IEA) and the Renewable Energy Policy Network for the 21. Century (REN21), identifies key barriers and highlights policy options to boost renewable energy deployment. After reviewing current policies and targets worldwide, it examines sector-specific policies for heating and cooling, transport and power, as well as measures for integrating variable renewables. An updated policy classification and terminology list can serve as a global reference for renewable energy policy instruments. Among the key findings: Renewable energy policies must focus on end-use sectors, not just power generation; The use of renewables for heating and cooling requires greater policy attention, including dedicated targets, technology mandates, financial incentives, generation-based incentives, and carbon or energy taxes; Policies in the transport sector require further development, including integrated policies to de-carbonise energy carriers and fuels, vehicles and infrastructure; Policies in the power sector must also evolve further to address new challenges. Measures are needed to support the integration of variable renewable energy, taking into account the specific

  3. Li-ion batteries: Phase transition

    International Nuclear Information System (INIS)

    Hou Peiyu; Zhang Yantao; Zhang Lianqi; Chu Geng; Gao Jian

    2016-01-01

    Progress in the research on phase transitions during Li + extraction/insertion processes in typical battery materials is summarized as examples to illustrate the significance of understanding phase transition phenomena in Li-ion batteries. Physical phenomena such as phase transitions (and resultant phase diagrams) are often observed in Li-ion battery research and already play an important role in promoting Li-ion battery technology. For example, the phase transitions during Li + insertion/extraction are highly relevant to the thermodynamics and kinetics of Li-ion batteries, and even physical characteristics such as specific energy, power density, volume variation, and safety-related properties. (topical review)

  4. On the 'Interim summary of requirements and criteria for nationwide scientific screening by the geological disposal technology working group.'

    International Nuclear Information System (INIS)

    Tochiyama, Osamu

    2016-01-01

    In order to make progress on the permanent geological disposal of high-level radioactive waste, the government of Japan revised, in May 2015, the basic plan to expand the site selection process, in which a set of site screening criteria was issued based on the existing geoscientific knowledge. These criteria were developed by the Geological Disposal Technology Working Group of the Nuclear Energy Subcommittee which was created by the Ministry of Economy, Trade and Industry (METI). (author)

  5. The multipurpose application of radio frequency identification (RFID) in the Tourism industry: On a requirement analysis for employing RFID technology in the hotel sector

    OpenAIRE

    Hassannia, Raheleh

    2014-01-01

    ABSTRACT: This study tried to evaluate the effects of Radio Frequency Identification ( RFID) as the new and latest technological advancement towards the implementation of profit chain model (Heskett et al, 1997) on international tourists (inbound) in the case of North Cyprus. North Cyprus is blessed with natural endowments and proximity to tourist market, especially the European countries. It has numerous regional and geographical advantages for a full-blown tourism industry. The study has fo...

  6. Multilayer Based Technology to Build RTD Fluxgate Magnetometer

    Directory of Open Access Journals (Sweden)

    B. ANDO

    2006-03-01

    Full Text Available In this paper we discuss the main features of the Residence Times Difference Fluxgate Magnetometer. A low-cost technology, negligible onboard power requirements and the intrinsic digital form of the readout signal are the main advantages of the proposed strategy. Results obtained show the possibility to realise low-cost devices exploiting Printed Circuit Board (PCB technology for applications requiring resolution in the nanotesla range as the ferrous object (or particles detection, being the performance obtained suitable to detect the presence or the transit of ferrous materials via their interaction with the geomagnetic field.

  7. Demand-Side Flexibility for Energy Transitions: Policy Recommendations for Developing Demand Response

    OpenAIRE

    Nursimulu, Anjali; Florin, Marie-Valentine; Vuille, François

    2016-01-01

    As a follow-up to IRGC's report on demand-side flexibility for energy transitions, this Policy Brief highlights that increasing flexibility in power systems is needed to accommodate higher shares of non-controllable and intermittent renewable generation, and that this requires changes to the market design and regulatory framework, to facilitate the development and deployment of appropriate technologies and market-based instruments (e.g. taxes and subsidies). The Policy Brief focuses on demand...

  8. Transition pathways for a UK low carbon electricity future

    International Nuclear Information System (INIS)

    Foxon, Timothy J.

    2013-01-01

    Achieving long-term targets for greenhouse gas emissions reductions, such as the UK's legally-binding target of reducing its emissions by 80% by 2050, will require a transition in systems for meeting and shaping energy service demands, involving radical substitution to low-carbon supply technologies and improvements in end-use energy efficiency. This paper describes the development and high-level analysis of a set of transition pathways to a UK low carbon electricity system, explaining key features of the core pathways developed and the distinctiveness and value of the approach. The pathways use an ‘action space’ concept to explore the dynamic interactions between choices made by actors, which are influenced by the competing governance ‘framings’ or ‘logics’ that different actors pursue. The paper sets out three core transition pathways – Market Rules, Central Co-ordination and Thousand Flowers, in which market, government and civil society logics respectively dominate. It summarises the key technological and institutional changes in these pathways, and the roles of actors in bringing these about. This leads to an identification of the key risks to the realisation of each of the pathways, and of the challenges for individuals, businesses, social movements and policy-makers in taking action to bring them about and sustain them. - Highlights: ► Development of a set of transition pathways to a UK low carbon electricity system. ► Action space to explore the dynamic interactions between choices made by actors. ► Three core pathways in which market, government and civil society logics dominate. ► Key technological and institutional changes, and the roles of actors in pathways. ► Challenges for different actors in realising pathways.

  9. The Mongolia experience: transitioning within transition.

    Science.gov (United States)

    MacKenzie, Richard G

    2009-12-01

    Although Mongolia has a long and distinguished history, as a new and emerging democracy it is experiencing the pains of transition-one that is moving the country from its pastoral and nomadic past into the 21st century. Confounded by its previous dependence on socialist Soviet Russia, the concept of a market economy seems opportunistic for some, while for those living within the traditional lifestyle of the herdsman in the countryside it is confusing and threatening to family structure and values. Adolescents and young adults are caught at the interface-not only of their own development, but by the disparities between tradition and Western values, new technology, and freedoms granted by the emerging democracy, and by the civic practice of democracy itself. Conceptually the new belongs to the young, and yet limited health and educational resources are available to modulate and focus both threats and opportunities. Using the analogy of the spirit banner of the warrior, it is the young as the warriors of the 21st century who have the energy and investment in the future that will be needed to shepherd this change. Both personal and public health, within the context of development, the psychobiological model, and the political and social ecology will be strong determinants of success. It is a parallel investment in both youth and the ideals they represent that will ensure success for the new Mongolia.

  10. California State Implementation Plan; Final Approval of Revision; Yolo-Solano Air Quality Management District; Reasonably Available Control Technology Requirements for 1997 8-hour Ozone NAAQS

    Science.gov (United States)

    EPA is taking final action to approve a revision to the Yolo-Solano Air Quality Management District (YSAQMD) portion of the California SIP concerning YSAQMD regarding RACT)requirements the 1997 8-hour ozone NAAQS and approve negative declarations into SIP.

  11. Waste management system functional requirements for Interim Waste Management Facilities (IWMFs) and technology demonstrations, LLWDDD [Low-Level Disposal Development and Demonstration] Program

    International Nuclear Information System (INIS)

    1988-03-01

    The purpose of this report is to build upon the preceding decisions and body of information to prepare draft system functional requirements for each classification of waste disposal currently proposed for Low-Level Waste Disposal Development Demonstration (LLWDDD) projects. Functional requirements identify specific information and data needs necessary to satisfy engineering design criteria/objectives for Interim Waste Management Facilities. This draft will suppor the alternatives evaluation process and will continue to evolve as strategy is implemented, regulatory limits are established, technical and economic uncertainties are resolved, and waste management plans are being implemented. This document will become the planning basis for the new generation of solid LLW management facilities on new sites on the Reservation. Eighteen (18) general system requirements are identified which are applicable to all four Low-Level Waste (LLW) disposal classifications. Each classification of LLW disposal is individually addressed with respect ot waste characteristics, site considerations, facility operations, facility closure/post-closure, intruder barriers, institutional control, and performance monitoring requirements. Three initial LLW disposal sites have been proposed as locations on the ORR for the first demonstrations

  12. Dark excitons in transition metal dichalcogenides

    Science.gov (United States)

    Malic, Ermin; Selig, Malte; Feierabend, Maja; Brem, Samuel; Christiansen, Dominik; Wendler, Florian; Knorr, Andreas; Berghäuser, Gunnar

    2018-01-01

    Monolayer transition metal dichalcogenides (TMDs) exhibit a remarkably strong Coulomb interaction that manifests in tightly bound excitons. Due to the complex electronic band structure exhibiting several spin-split valleys in the conduction and valence band, dark excitonic states can be formed. They are inaccessibly by light due to the required spin-flip and/or momentum transfer. The relative position of these dark states with respect to the optically accessible bright excitons has a crucial impact on the emission efficiency of these materials and thus on their technological potential. Based on the solution of the Wannier equation, we present the excitonic landscape of the most studied TMD materials including the spectral position of momentum- and spin-forbidden excitonic states. We show that the knowledge of the electronic dispersion does not allow to conclude about the nature of the material's band gap since excitonic effects can give rise to significant changes. Furthermore, we reveal that an exponentially reduced photoluminescence yield does not necessarily reflect a transition from a direct to a nondirect gap material, but can be ascribed in most cases to a change of the relative spectral distance between bright and dark excitonic states.

  13. Hydrogen technologies and the technology learning curve

    International Nuclear Information System (INIS)

    Rogner, H.-H.

    1998-01-01

    On their bumpy road to commercialization, hydrogen production, delivery and conversion technologies not only require dedicated research, development and demonstration efforts, but also protected niche markets and early adopters. While niche markets utilize the unique technological properties of hydrogen, adopters exhibit a willingness to pay a premium for hydrogen fueled energy services. The concept of the technology learning curve is applied to estimate the capital requirements associated with the commercialization process of several hydrogen technologies. (author)

  14. Europe’s electricity regime: restoration or thorough transition

    Directory of Open Access Journals (Sweden)

    Aviel Verbruggen

    2015-06-01

    Full Text Available Concerns about climate change, diminishing social acceptance of traditional fuels, and technological innovations have led several countries to pursue energy transition strategies, typically by massive diffusion of renewable electricity supplies. The German ‘Energiewende’ has been successful so far in terms of deploying renewable power, mainly by applying particular feed-in tariffs, and by bundling public, academic, industrial and political support. So far though, only few EU member states proceed with a similar transition. In March 2014 CEOs of Europe’s major energy companies publicly opposed a fast and thorough transformation of electricity supplies to become fully renewable. In April 2014 the European Commission published new state aid guidelines, generally mandating renewable energy support mechanisms (premiums, tenders of lesser performance than regularly adjusted, specific feed-in tariffs. The new guidelines are likely to be pernicious for the fast deployment of renewable electricity supplies. In light of these challenges, this position paper highlights two implications of power sector transitions. First, the engineering-economics theory of power generation systems needs fundamental revision, mainly since a growing share of power sources no longer function on command. Second, and based on the experience in Germany, the paper sketches out a strategy for a thorough transition of the power sector, which, in the end, also entails normative judgements. Deep changes in energy systems and associated ways of living require societal consensus building based on ethical considerations.

  15. Positioning Nuclear Power in the Low-Carbon Electricity Transition

    Directory of Open Access Journals (Sweden)

    Aviel Verbruggen

    2017-01-01

    Full Text Available Addressing climate change requires de-carbonizing future energy supplies in an increasingly energy-dependent world. The IEA and the IPCC (2014 mention the following as low-carbon energy supply options: ‘renewable energy, nuclear power and fossil fuels with carbon capture and storage’. Positioning nuclear power in the decarbonization transition is a problematic issue and is overridden by ill-conceived axioms. Before probing these axioms, we provide an overview of five major, postwar energy-related legacies and some insight into who is engaged in nuclear activities. We check whether low-carbon nuclear power passes the full sustainability test and whether it is compatible with the unfettered deployment of variable renewable power sourced from the sun and from wind and water currents, which delivers two negative answers. We show that the best approach of the sustainable energy transition was Germany’s 2011 decision to phase out nuclear power for a fast development and full deployment of renewable power. This is the best approach for the sustainable energy transition. We offer five practical suggestions to strengthen and accelerate carbon- and nuclear-free transitions. They are related to institutional issues like the role of cost-benefit analysis and the mission of the International Atomic Energy Agency, to the costs of nuclear risks and catastrophes, and to the historical record of nuclear technology and business.

  16. Budapest Training Technology Centre.

    Science.gov (United States)

    Budapest Training Technology Centre (Hungary).

    The Budapest Training Technology Centre (BTTC) grew out of a 1990 agreement calling for Great Britain to help Hungary develop and implement open and flexible training methods and technology-based training to support the labor force development and vocational training needs resulting from Hungary's transition to a market economy. The BTTC would be…

  17. Energy storage deployment and innovation for the clean energy transition

    Science.gov (United States)

    Kittner, Noah; Lill, Felix; Kammen, Daniel M.

    2017-09-01

    The clean energy transition requires a co-evolution of innovation, investment, and deployment strategies for emerging energy storage technologies. A deeply decarbonized energy system research platform needs materials science advances in battery technology to overcome the intermittency challenges of wind and solar electricity. Simultaneously, policies designed to build market growth and innovation in battery storage may complement cost reductions across a suite of clean energy technologies. Further integration of R&D and deployment of new storage technologies paves a clear route toward cost-effective low-carbon electricity. Here we analyse deployment and innovation using a two-factor model that integrates the value of investment in materials innovation and technology deployment over time from an empirical dataset covering battery storage technology. Complementary advances in battery storage are of utmost importance to decarbonization alongside improvements in renewable electricity sources. We find and chart a viable path to dispatchable US$1 W-1 solar with US$100 kWh-1 battery storage that enables combinations of solar, wind, and storage to compete directly with fossil-based electricity options.

  18. 47 CFR 101.4 - Transition plan.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Transition plan. 101.4 Section 101.4 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Applications and Licenses General Filing Requirements § 101.4 Transition plan. (a) All systems...

  19. Stimulating transitions towards sustainable farming systems

    NARCIS (Netherlands)

    Elzen, B.; Barbier, M.; Cerf, M.; Grin, J.

    2012-01-01

    How can the dynamics of the agro-food sector in the long run be addressed? We argue that sustainable agro-food systems cannot be developed through a simple improvement of existing systems, but will require a transition. Therefore, we focus on how transitions to sustainability could be initiated and

  20. Analysis Report for Exascale Storage Requirements for Scientific Data.

    Energy Technology Data Exchange (ETDEWEB)

    Ruwart, Thomas M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-02-01

    Over the next 10 years, the Department of Energy will be transitioning from Petascale to Exascale Computing resulting in data storage, networking, and infrastructure requirements to increase by three orders of magnitude. The technologies and best practices used today are the result of a relatively slow evolution of ancestral technologies developed in the 1950s and 1960s. These include magnetic tape, magnetic disk, networking, databases, file systems, and operating systems. These technologies will continue to evolve over the next 10 to 15 years on a reasonably predictable path. Experience with the challenges involved in transitioning these fundamental technologies from Terascale to Petascale computing systems has raised questions about how these will scale another 3 or 4 orders of magnitude to meet the requirements imposed by Exascale computing systems. This report is focused on the most concerning scaling issues with data storage systems as they relate to High Performance Computing- and presents options for a path forward. Given the ability to store exponentially increasing amounts of data, far more advanced concepts and use of metadata will be critical to managing data in Exascale computing systems.