WorldWideScience

Sample records for technology training center

  1. 76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

    Science.gov (United States)

    2011-06-17

    ..., Detroit, MI; UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including... Center, Technology Training Joint Programs Staff, Detroit, Michigan (TA-W-71,047) and Warren, Michigan..., Technology Training Joint Programs Staff. The Department has determined that these workers were...

  2. 76 FR 2147 - UAW-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW...

    Science.gov (United States)

    2011-01-12

    ... Programs Staff, Detroit, MI; UAW-Chrysler Technical Training Center Technology Training Joint Programs... Technology Training Joint Programs Staff; and the criteria set forth in Section 222(a) has been met. During...-Chrysler National Training Center, Technology Training Joint Programs Staff, Detroit, Michigan, and...

  3. Introducing Nagasaki Coal Mining Technology Training Center owned by the Mitsui Matsushima Resources Co., Ltd.

    Energy Technology Data Exchange (ETDEWEB)

    Kumakawa, K. [Mitsui Matsushima Resources Co., Ltd. (Japan)

    2006-09-15

    The Nagasaki Coal Mine Technology Training Center was established as a facility for 'The Training Project' on coal mine technology following the purchase of part of the mining area owned by the Matsushima Coal Mine which was closed in November 2001. The Training Center is located seaward at Ikeshima approximately 7 km west of the Nishisonogi Peninsula's western coast. Training is provided to personnel from Vietnam and Indonesia in subjects ranging from underground mining safety, exploration surveying and rock drivage, to electrical engineering. 3 figs., 4 tabs.

  4. REVIEW OF SOFT SKILLS AMONG TRAINERS FROM ADVANCED TECHNOLOGY TRAINING CENTER (ADTEC)

    OpenAIRE

    Mohd Hasril Amiruddin; Norhayati Ngadiman; Romy Abdul Kadir; Sukartini Saidy

    2016-01-01

    The Advanced Technology Training Centre (ADTEC) institutions under the Ministry of Human Resource are major players for skilled human resource development in Malaysia. In preparing for the competent workforce, ADTECs are taking active measures to ensure that their trainees are equipped with the necessary soft skills –in addition to technical skill - that are much needed to deal with the complex and challenging workplace. However, integrating soft skills into the training that has traditionall...

  5. Training Centers for Onsite Wastewater Treatment

    Science.gov (United States)

    Onsite wastewater training centers offer classes, demonstration projects and research facilities for onsite industry professionals. Classes include wastewater management, new technologies and pre-licensing.

  6. Mississippi Technology Transfer Center

    Science.gov (United States)

    1987-01-01

    The Mississippi Technology Transfer Center at the John C. Stennis Space Center in Hancock County, Miss., was officially dedicated in 1987. The center is home to several state agencies as well as the Center For Higher Learning.

  7. A review of the design and development processes of simulation for training in healthcare - A technology-centered versus a human-centered perspective.

    Science.gov (United States)

    Persson, Johanna

    2017-01-01

    This article reviews literature about simulation systems for training in healthcare regarding the prevalence of human-centered approaches in the design and development of these systems, motivated by a tradition in this field of working technology-centered. The results show that the focus on human needs and context of use is limited. It is argued that a reduction of the focus on technical advancements in favor of the needs of the users and the healthcare community, underpinned by human factors and ergonomics theory, is favorable. Due to the low number of identified articles describing or discussing human-centered approaches it is furthermore concluded that the publication culture promotes technical descriptions and summative evaluations rather than descriptions and reflections regarding the design and development processes. Shifting the focus from a technology-centered approach to a human-centered one can aid in the process of creating simulation systems for training in healthcare that are: 1) relevant to the learning objectives, 2) adapted to the needs of users, context and task, and 3) not selected based on technical or fidelity criteria.

  8. National Biocontainment Training Center

    Science.gov (United States)

    2015-08-01

    than ever before as scientists push to understand the pathology and develop diagnostics, vaccines and therapeutics for deadly diseases like Ebola...Hardcastle, Vickie Jones, Sheri Leavitt, and Belinda Rivera. Gulf Coast Consortium Postdoctoral Veterinary Training Program - A clinical veterinarian from...the Center for Comparative Medicine at Baylor College of Medicine in Houston and a veterinarian from the University of Texas Health Science Center

  9. NETL to establish Dynamic Simulation Research and Training Center to promote IGCC technology with CO2 cpture

    Energy Technology Data Exchange (ETDEWEB)

    Provost, G.; Zitney, S.; Turton, R.; Erbes, M.; Stone, H.; Bhattacharyya, D.; Liese, E.; McClintock, M.; Quintrell, M.

    2009-01-01

    To meet increasing demand for education and experience with commercial-scale, coal-fired, integrated gasification combined cycle (IGCC) plants with CO2 capture, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) is leading a project to deploy a generic, full-scope, real-time IGCC dynamic plant simulator for use in establishing a world-class research and training center, and to promote and demonstrate IGCC technology to power industry personnel. The simulator, being built by Invensys Process Systems (IPS), will be installed at two separate sites, at NETL and West Virginia University (WVU), and will combine a process/gasification simulator with a power/combined-cycle simulator together in a single dynamic simulation framework for use in engineering research studies and training applications. The simulator, scheduled to be launched in mid-year 2010, will have the following capabilities: High-fidelity, dynamic model of process-side (gasification and gas cleaning with CO2 capture) and power-block-side (combined cycle) for a generic IGCC plant fueled by coal and/or petroleum coke. Highly flexible configuration that allows concurrent training on separate gasification and combined cycle simulators, or up to two IGCC simulators. Ability to enhance and modify the plant model to facilitate studies of changes in plant configuration, equipment, and control strategies to support future R&D efforts. Training capabilities including startup, shutdown, load following and shedding, response to fuel and ambient condition variations, control strategy analysis (turbine vs. gasifier lead, etc.), representative malfunctions/trips, alarms, scenarios, trending, snapshots, data historian, etc. To support this effort, process descriptions and control strategies were developed for key sections of the plant as part of the detailed functional specification, which is serving as the basis of the simulator development. In this paper, we highlight the contents of the

  10. Enhancing Soldier-Centered Learning with Emerging Training Technologies and Integrated Assessments

    Science.gov (United States)

    2013-12-01

    learn, the desire to practice, and other training related outcomes (Mautone, Spiker, Karp , & Conkey, 2010; Topolski, Leibrecht, Cooley, Rossi, Lampton...the Simulation Interoperability Workshop. Mautone, T., Spiker, A., Karp , M. R., & Conkey, C. (2010). Using games to accelerate aircrew cognitive

  11. Management of nuclear training center

    Energy Technology Data Exchange (ETDEWEB)

    Seo, In Suk; Lee, Han Young; Cho, Boung Jae; Lee, Seung Hee; Lee, Eoi Jin; You, Byung Hoon; Lee, Won Ku; Jeon, Hyung Ryeon; Seo, Kyung Won; Kim, Young Joong; Kim, Ik Hyun; Hyun, Ha Il; Choi, Il Ki; Hong, Choon Sun; Won, Jong Yeul; Joo, Yong Chang; Nam, Jae Yeul; Sin, Eun Jeong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-02-01

    This report describes the annual results of training courses. The scope and contents are as follows : 1. Regional and interregional training courses, 2. Training courses assisted by foreign experts, 3. Training courses for nuclear industry personnel, 4. Training courses for internal staff-members, 5. Training courses under the law. The nuclear training center executed the open-door training courses for 2,699 engineers/scientists from the regulatory body, nuclear industries, research institutes and other related organizations by means of offering 69 training courses during the fiscal year 1995. (Author) .new.

  12. "Infotonics Technology Center"

    Energy Technology Data Exchange (ETDEWEB)

    Fritzemeier, L. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Boysel, M. B. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Smith, D. R. [Infotonics Technology Center Inc., Canandaigua, NY (United States)

    2004-09-30

    During this grant period July 15, 2002 thru September 30, 2004, the Infotonics Technology Center developed the critical infrastructure and technical expertise necessary to accelerate the development of sensors, alternative lighting and power sources, and other specific subtopics of interest to Department of Energy. Infotonics fosters collaboration among industry, universities and government and operates as a national center of excellence to drive photonics and microsystems development and commercialization. A main goal of the Center is to establish a unique, world-class research and development facility. A state-of-the-art microsystems prototype and pilot fabrication facility was established to enable rapid commercialization of new products of particular interest to DOE. The Center has three primary areas of photonics and microsystems competency: device research and engineering, packaging and assembly, and prototype and pilot-scale fabrication. Center activities focused on next generation optical communication networks, advanced imaging and information sensors and systems, micro-fluidic systems, assembly and packaging technologies, and biochemical sensors. With targeted research programs guided by the wealth of expertise of Infotonics business and scientific staff, the fabrication and packaging facility supports and accelerates innovative technology development of special interest to DOE in support of its mission and strategic defense, energy, and science goals.

  13. National Biocontainment Training Center

    Science.gov (United States)

    2013-07-01

    Gina Papadakis ’ training included a review of the Galveston National Laboratory’s biosafety requirements for BSL2, 3 and 4 as well as BSL4 facility...training and BSL4 emergency procedures and incident response. Working with the NBTC’s expert staff, Drs. Druce and Papadakis spent time engaged in...Gina Papadakis , BSL4 Trainer Jet Newton, Dr. Julian Druce and GNL Director Dr. James LeDuc. Previous page right: The group is pictured with

  14. National Biocontainment Training Center

    Science.gov (United States)

    2010-06-01

    experimentally infected animals, including non- human primates, under containment conditions. As our animal handling in containment training module...Theoretical non 16 0 0 0 16 human primate BSL3 mentorship 26 10 0 17 53 Specialized 0 18 0 17 35 training (Assay Development division) BSL3...39% 4% 11% Su ent:fk f acdity Jnd M<.)nlen<.tn ct~ ··· Onwr> (IT, i\\RC, Non ;ocntdK) tr High >chool Underr . rdd Stude nt Graduate St u(~cnt s

  15. National Biocontainment Training Center

    Science.gov (United States)

    2014-08-01

    Betancourt from University of Miami, Cesar Esquivel from Universidad de Monterrey - UDEM, Mexico, and from Universidad Autonoma de Nuevo Leon - UANL...Trainees from University of Miami, Universidad de Monterrey - UDEM, Mexico, and Universidad Autonoma de Nuevo Leon - UANL, Mexico trained at the...and software that accurately measures actual inhaled volumes in non-human primates is being tested and will be implemented in the aerosol biology

  16. National Biocontainment Training Center

    Science.gov (United States)

    2016-10-01

    reporting period. Both BSL3 and BSL4 laboratories are housed in this new multi-story facility located on the University of Melbourne campus. The...BRL supports research programs in the National Center for Biodefense and Infectious Diseases, and the BRL is equipped with facilities to house ...Lower Rhine in The Netherlands. Doherty Institute – Melbourne , Australia – Miguel Grimaldo continues his consultations with the Peter Doherty

  17. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  18. Solar Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, Bob

    2011-04-27

    The Department of Energy, Golden Field Office, awarded a grant to the UNLV Research Foundation (UNLVRF) on August 1, 2005 to develop a solar and renewable energy information center. The Solar Technology Center (STC) is to be developed in two phases, with Phase I consisting of all activities necessary to determine feasibility of the project, including design and engineering, identification of land access issues and permitting necessary to determine project viability without permanently disturbing the project site, and completion of a National Environmental Policy Act (NEPA) Environmental Assessment. Phase II is the installation of infrastructure and related structures, which leads to commencement of operations of the STC. The STC is located in the Boulder City designated 3,000-acre Eldorado Valley Energy Zone, approximately 15 miles southwest of downtown Boulder City and fronting on Eldorado Valley Drive. The 33-acre vacant parcel has been leased to the Nevada Test Site Development Corporation (NTSDC) by Boulder City to accommodate a planned facility that will be synergistic with present and planned energy projects in the Zone. The parcel will be developed by the UNLVRF. The NTSDC is the economic development arm of the UNLVRF. UNLVRF will be the entity responsible for overseeing the lease and the development project to assure compliance with the lease stipulations established by Boulder City. The STC will be operated and maintained by University of Nevada, Las Vegas (UNLV) and its Center for Energy Research (UNLV-CER). Land parcels in the Eldorado Valley Energy Zone near the 33-acre lease are committed to the construction and operation of an electrical grid connected solar energy production facility. Other projects supporting renewable and solar technologies have been developed within the energy zone, with several more developments in the horizon.

  19. Advanced Training Technologies and Learning Environments

    Science.gov (United States)

    Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

    1999-01-01

    This document contains the proceedings of the Workshop on Advanced Training Technologies and Learning Environments held at NASA Langley Research Center, Hampton, Virginia, March 9-10, 1999. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objective of the workshop was to assess the status and effectiveness of different advanced training technologies and learning environments.

  20. Join TTC! | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) offers a unique opportunity for training through the NCI TTC Fellowship program. TTC also has a unit dedicated to marketing these research opportunities and their underlying technologies to potential collaborators and licensees. | [google6f4cd5334ac394ab.html

  1. Low-cost training technology

    Science.gov (United States)

    Lee, A. T.

    1984-01-01

    The differences between flight training technology and flight simulation technology are highlighted. Examples of training technologies are provided, including the Navy's training system and the interactive cockpit training device. Training problems that might arise in the near future are discussed. These challenges follow from the increased amount and variety of information that a pilot must have access to in the cockpit.

  2. Search Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  3. Available Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  4. 77 FR 43368 - Navistar Truck Development and Technology Center, a Subsidiary of Navistar International...

    Science.gov (United States)

    2012-07-24

    ... Employment and Training Administration Navistar Truck Development and Technology Center, a Subsidiary of... October 20, 2011, applicable to workers of Navistar International Truck Development and Technology Center... Truck Development and Technology Center, a Subsidiary of Navistar International Corporation,...

  5. The Waste Isolation Pilot Plant - An International Center of Excellence for ''Training in and Demonstration of Waste Disposal Technologies''

    Energy Technology Data Exchange (ETDEWEB)

    Matthews, Mark L.; Eriksson, Leif G.

    2003-02-25

    The Waste Isolation Pilot Plant (WIPP) site, which is managed and operated by the United States (U.S.) Department of Energy (USDOE) Carlsbad Field Office (CBFO) and located in the State of New Mexico, presently hosts an underground research laboratory (URL) and the world's first certified and operating deep geological repository for safe disposition of long-lived radioactive materials (LLRMs). Both the URL and the repository are situated approximately 650 meters (m) below the ground surface in a 250-million-year-old, 600-m-thick, undisturbed, bedded salt formation, and they have been in operation since 1982 and 1999, respectively. Founded on long-standing CBFO collaborations with international and national radioactive waste management organizations, since 2001, WIPP serves as the Center of Excellence in Rock Salt for the International Atomic Energy Agency's (IAEA's) International Network of Centers on ''Training in and Demonstration of Waste Disposal Technologies in Underground Research Facilities'' (the IAEA Network). The primary objective for the IAEA Network is to foster collaborative projects among IAEA Member States that: supplement national efforts and promote public confidence in waste disposal schemes; contribute to the resolution of key technical issues; and encourage the transfer and preservation of knowledge and technologies.

  6. IGCC Dynamic Simulator and Training Center

    Energy Technology Data Exchange (ETDEWEB)

    Zitney, S.E.; Erbes, M.R. (Enginomix, LLC)

    2006-10-01

    Integrated Gasification Combined Cycle (IGCC) is emerging as the technology of choice for providing clean, low-cost electricity for the next generation of coal-fired power plants and will play a central role in the development of high-efficiency, zero-emissions power plants such as FutureGen. Several major utilities and developers recently announced plans to build IGCC plants and other major utilities are evaluating IGCC’s suitability for base-load capacity additions. This recent surge of attention to IGCC power generation is creating a growing demand for experience with the analysis, operation, and control of commercial-scale IGCC plants. To meet this need, the National Energy Technology Laboratory (NETL) has launched a project to develop a generic, full-scope, IGCC dynamic plant simulator for use in establishing a state-of-the-art simulator training center at West Virginia University’s (WVU) National Research Center for Coal and Energy (NRCCE). The IGCC Dynamic Simulator & Training (DS&T) Center will be established under the auspices of the Collaboratory for Process & Dynamic Systems Modeling (“Collaboratory”) organized between NETL, WVU, the University of Pittsburgh, and Carnegie Mellon University.

  7. Maglev trains key underlying technologies

    CERN Document Server

    Liu, Zhigang; Li, Xiaolong

    2015-01-01

    The motion of the train depends on the traction of linear motors in the vehicle. This book describes a number of essential technologies that can ensure the safe operation of Maglev trains, such as suspension and orientation technologies, network control and diagnosis technologies. This book is intended for researchers, scientists, engineers and graduate students involved in the rail transit industry, train control and diagnosis, and Maglev technology.

  8. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-07-31

    FIU-HCET personnel visited the Special Technologies Laboratory (STL) for discussions with the Principal Investigator (PI) of Laser Induced Fluorescence Imaging (LIFI) and for training in LIFI. Mr. Peter Gibbons, Tanks Retrieval Technology Integration Manager, visited FIU-HCET on July 20, 1999. Mr. Gibbons inspected the pipeline unplugging experimental facility at the HCET testing field. The detailed test bed construction, testing plan, and plugging material specifications were discussed.

  9. Morgantown Energy Technology Center, technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

  10. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-10-31

    The Deactivation and Decommissioning (D&D) Technology Assessment Program (TAP) was developed to provide detailed, comparable data for environmental technologies and to disseminate this data to D&D professionals in a manner that will facilitate the review and selection of technologies to perform decontamination and decommissioning. The objectives for this project include the following: Determine technology needs through review of the Site Technology Coordination Group (STCG) information and other applicable websites and needs databases; Perform a detailed review of industries that perform similar activities as those required in D&D operations to identify additional technologies; Define the technology assessment program for characterization and waste management problem sets; Define the data management program for characterization, dismantlement, and waste management problem sets; Evaluate baseline and innovative technologies under standard test conditions at Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) and other locations and collect data in the areas of performance, cost, health and safety, operations and maintenance, and primary and secondary waste generation; Continue to locate, verify, and incorporate technology performance data from other sources into the multimedia information system; and Develop the conceptual design for a dismantlement technology decision analysis tool for dismantlement technologies.

  11. An International Development Technology Center

    Science.gov (United States)

    Morgan, Robert P.

    1969-01-01

    Main focus of the Center is "the application of science and technology to the solution of problems faced by people in less-developed areas of the world. Adapted from paper presented at ASEE Annual Meeting, The Pennsylvania State University, June, 1969. (Author/WM)

  12. Graduate Automotive Technology Education (GATE) Center

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey Hodgson; David Irick

    2005-09-30

    The Graduate Automotive Technology Education (GATE) Center at the University of Tennessee, Knoxville has completed its sixth year of operation. During this period the Center has involved thirteen GATE Fellows and ten GATE Research Assistants in preparing them to contribute to advanced automotive technologies in the center's focus area: hybrid drive trains and control systems. Eighteen GATE students have graduated, and three have completed their course work requirements. Nine faculty members from three departments in the College of Engineering have been involved in the GATE Center. In addition to the impact that the Center has had on the students and faculty involved, the presence of the center has led to the acquisition of resources that probably would not have been obtained if the GATE Center had not existed. Significant industry interaction such as internships, equipment donations, and support for GATE students has been realized. The value of the total resources brought to the university (including related research contracts) exceeds $4,000,000. Problem areas are discussed in the hope that future activities may benefit from the operation of the current program.

  13. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-03-30

    A vendor was selected for the diamond wire technology demonstration scheduled for this summer at Princeton Plasma Physics Laboratory (PPPL). A team consisting of personnel from FIU-HCET, PPPL, and AEA Technology reviewed the submitted bids. FIU-HCET will contract this vendor. At the SRS Ninth ICT teleconference, the ICT team discussed the status of the following demonstrations: LRAD; x-ray, K-edge; Strippable Coatings; Thermal Spray Vitrification; Cutting/Shearing/Dismantlement/Size Reduction; and Electrets. The LRAD demo is complete, and the x-ray/K-edge, Strippable Coatings, and Electrets demos are ongoing. The Asbestos and Thermal Spray Vitrification demos require more laboratory testing. The Cutting/Shearing/Dismantlement/Size Reduction demo is undergoing procurement. Five FIU-HCET staff members took the 1S0 14000 environmental auditor training course February 22-26, 1999, given by ASC. The test plan for the Facility Dismantlement Technology Assessment is finished and ready for internal review.

  14. NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute’s Technology Transfer Center (TTC) facilitates partnerships between the NIH research laboratories and external partners. With specialized teams, TTC guides the interactions of our partners from the point of discovery to patenting, from invention development to licensing. We play a key role in helping to accelerate development of cutting-edge research by connecting our partners to NIH’s world-class researchers, facilities, and knowledge.

  15. 14 CFR 142.17 - Satellite training centers.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Satellite training centers. 142.17 Section...) SCHOOLS AND OTHER CERTIFICATED AGENCIES TRAINING CENTERS General § 142.17 Satellite training centers. (a... training program at a satellite training center if— (1) The facilities, equipment, personnel, and...

  16. Center for Advanced Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, Rick

    2013-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, CAST is now a five-university consortium – Virginia Tech, West Virginia University, University of Kentucky, University of Utah and Montana Tech, - that is supported through U.S. DOE Cooperative Agreement No. DE-FE0000699, Center for Advanced Separation Technology. Much of the research to be conducted with Cooperative Agreement funds will be longer term, high-risk, basic research and will be carried out in two broad areas: Advanced Pre-Combustion Clean Coal Technologies and Gas-Gas Separations. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the five member universities. These were reviewed and the selected proposals were forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed below by category, along with abstracts from their final reports.

  17. Training centers of a new type

    Directory of Open Access Journals (Sweden)

    Roza Rakhmanbaeva

    2010-02-01

    Full Text Available Necessity for innovative production development sets the new requirements for content, organization, forms and methods of management activity. Non-traditional tasks faced by the present system of human resources management require the similar type of non-traditional methodological approaches and tools for social diagnosis, training and management of people in new situations. Therefore special attention should be also given to development of new type training centers that act as concentration of continuous training through forming the networks of comparative analysis and detecting the best practice.

  18. Electronics principles inventory, Sheppard Technical Training Center

    Science.gov (United States)

    1990-02-01

    Data are provided on the electronic principles (EP) used by airmen in 13 Air Force Specialties (AFSs) with initial training at Sheppard Technical Training Center (TTC). The USAF Electronic Principles Inventory (AFPT 90-EPI-825) was administered to random samples of fully qualified job incumbents representing the 13 AFSs in this report. The data were collected from March 1987 to September 1988. Although there is no specific regulatory guidance on the use of EPO data, the survey data lends itself to the use of cutoff scores for deciding which EPI items to include in centralized training for each AFSC. Once the training needs of the individual AFSCs have been determined, the possibility for consolidated EP training can be considered.

  19. Mental Health Technician Training Program, Desert Willow Training Center, March 1975.

    Science.gov (United States)

    Public Health Service (DHEW), Washington, DC. Div. of Indian Health.

    Founded in 1971, the program was designed to allow Indian Health Service (IHS) trainees to take as little or as much training as they needed to fill their agency's requirements and their own career ambitions. A full complement of courses leading to an associate degree in Mental Health Technology was developed for the Center and accredited through…

  20. Center for Nanoscale Science and Technology

    Science.gov (United States)

    NIST Center for Nanoscale Science and Technology (Program website, free access)   Currently there is no database matching your keyword search, but the NIST Center for Nanoscale Science and Technology website may be of interest. The Center for Nanoscale Science and Technology enables science and industry by providing essential measurement methods, instrumentation, and standards to support all phases of nanotechnology development, from discovery to production.

  1. Building Technologies Research and Integration Center (BTRIC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

  2. 4 years of successful knowledge transfer - the nuclear technology training center of the TUeV Nord Group; 4 Jahre erfolgreicher Wissenstransfer - das Ausbildungszentrum fuer Kerntechnik der TUeV Nord Gruppe

    Energy Technology Data Exchange (ETDEWEB)

    Willenbockel, I. [TUeV NORD EnSys Hannover GmbH und Co. KG, Abt. ETE, Hannover (Germany); Tietze, U. [TUeV NORD SysTec, Ausbildungszentrum fuer Kerntechnik, Hamburg (Germany)

    2007-02-15

    In connection with the 2002 amendment to the German Atomic Energy Act, the topics of generational change and maintenance of competence grew in importance and necessitated new solution approaches. To this end, various activities were launched, with the aim of conducting conceptual analyses of these topics. Examples include the 'National Competence Network for Nuclear Technology' (Nationaler Kompetenzverbund fuer Kerntechnik), various networks established by colleges and universities, the 'Knowledge Management for the Maintenance and Transfer of Competence in Reactor Safety' (Wissensmanagement zum Kompetenzerhalt und -transfer in der Reaktorsicherheit) workshop held in 2001 in Garching near Munich (Germany) and the 'Ad-hoc Workgroup on the Maintenance of Competence' (Ad-hoc-Arbeitskreis Kompetenzerhalt) of the VdTUeV. The nuclear technology departments of the TUeV Nord Group were aware of te challenges associated with the generational change early on. By establishing the 'Nuclear Technology Training Center' (Ausbildungszentrum fuer Kerntechnik, AfK), the TUeV Nord Group intended to ensure the required knowledge transfer during the generational change as well as maintain the renowned high qualification as regards the subject of nuclear technology and thus continue to provide - in the sense of social responsibility - crucial contribution to the long-term safety of nuclear plants. Four years have passed since the training center held the first courses in the fall of 2002. Up to now, more than 350 participants have been trained in the courses conducted by the AfK. In the opinion of the TUeV Nord Group, the activities of the AfK have laid the foundation for a successful change of generations within the group's nuclear technology organizations. (orig.)

  3. Trends of Training Courses Conducted in the Human Resources Development Center of the National Institute for Quantum and Radiological Science and Technology After the Fukushima Dai-Ichi Nuclear Power Plant Accident.

    Science.gov (United States)

    Shimizu, Yuko; Iida, Haruzo; Nenoi, Mitsuru

    2017-07-01

    Environmental contamination with radioactive materials caused by the Fukushima Dai-ichi Nuclear Power Plant (NPP) accident in 2011 raised a serious health concern among residents in Japan, and the demand for radiation experts who can handle the radiation-associated problems has increased. The Human Resources Development Center (HRDC) of the National Institute of for Quantum and Radiological Science and Technology in Japan has offered a variety of training programs covering a wide range of technologies associated with radiation since 1959. In this study, the time-course change in the number and age of the applicants for training programs regularly scheduled at HRDC were analyzed to characterize the demand after the NPP accident. The results suggested that the demand for the training of industrial radiation experts elevated sharply after the NPP accident followed by a prompt decrease, and that young people were likely stimulated to learn the basics of radiation. The demand for the training of medical radiation experts was kept high regardless of the NPP accident. The demand for the training of radiation emergency experts fluctuated apparently with three components: a terminating demand after the criticality accident that occurred in 1999, an urgent demand for handling of the NPP accident, and a sustained demand from local governments that undertook reinforcement of their nuclear disaster prevention program. The demand for the training of school students appeared to be increasing after the NPP accident. It could be foreseen that the demand for training programs targeting young people and medical radiation experts would be elevated in future.

  4. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-04-30

    The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

  5. CAD/BIM Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — Supporting Better Decisions in Facility, Infrastructure, and Environment Management Access to technology tools to model structures before they are built can provide...

  6. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-05-31

    The programming and website for the advanced Technology Information System (TIS) have been completed. Over and above the LSDDP-TIS, the new system provides information on DOE's baseline technologies, technology data contained in DOE's databases, technologies assessed at FIU-HCET Technology Assessment Program (TAP), as well as links to other selected D&D sites with valuable technology information. The new name for the website is Gateway for Environmental Technology (GET). A super-vacuum type blasting system was tested for decontamination of 12-in pipe internal surfaces. The system operates on compressed air and propels grit media at high speed at wall surfaces. It is equipped with a vacuum system for collecting grit, dust, and debris. This technology was selected for further development. The electret ion chamber (EIC) system for measurement of alpha contamination on surfaces has been calibrated and is ready for demonstration and deployment. FIU-HCET is working with representatives from Fernald, Oak Ridge, Rocky Flats, and Savannah River to procure a demonstration and deployment site. Final arrangements are ongoing for the mock-up design for the glove box and tank size reduction technology assessments, including designing of support bases for tanks, a piping support system, and a mobilization plan for glove boxes and tanks from storage site to the PermaCon.

  7. CAD/BIM Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — Supporting Better Decisions in Facility, Infrastructure, and Environment ManagementAccess to technology tools to model structures before they are built can provide...

  8. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-01-31

    FIU-HCET participated in an ICT meeting at Mound during the second week of December and presented a brief videotape of the testing of the Robotic Climber technology. During this meeting, FIU-HCET proposed the TechXtract technology for possible testing at Mound and agreed to develop a five-page proposal for review by team members. FIU-HCET provided assistance to Bartlett Inc. and General Lasertronics Corporation in developing a proposal for a Program Opportunity Notice (PON). The proposal was submitted by these companies on January 5, 1999. The search for new equipment dismantlement technologies is continuing. The following vendors have responded to requests for demonstration: LUMONICS, Laser Solutions technology; CRYO-BEAM, Cryogenic cutting technology; Waterjet Technology Association, Waterjet Cutting technology; and DIAJET, Waterjet Cutting technology. Based on the tasks done in FY98, FIU-HCET is working closely with Numatec Hanford Corporation (NHC) and Pacific Northwest National Laboratory (PNNL) to revise the plan and scope of work of the pipeline plugging project in FY99, which involves activities of lab-scale flow loop experiments and a large-scale demonstration test bed.

  9. Advanced technologies for Mission Control Centers

    Science.gov (United States)

    Dalton, John T.; Hughes, Peter M.

    1991-01-01

    Advance technologies for Mission Control Centers are presented in the form of the viewgraphs. The following subject areas are covered: technology needs; current technology efforts at GSFC (human-machine interface development, object oriented software development, expert systems, knowledge-based software engineering environments, and high performance VLSI telemetry systems); and test beds.

  10. Scientific Management Training | Center for Cancer Research

    Science.gov (United States)

    The NCI intramural program is one of the largest centers for cancer research in the world, with approximately 200 principal investigators and 500 postdoctoral fellows. While outstanding scientific research is conducted at NCI, many of the scientists who go on to lead their own laboratories have few management skills. The Scientific Management Training course focuses on personnel and project management. In the “Art of Supervision” section, the emphasis is on the uniqueness of each person and how each staff member should be treated to achieve desired outcomes.

  11. Savannah River Technology Center, monthly report

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This is the monthly report to detail the research currently being conducted at the Savannah River Technology Center. The areas of research are in Tritium, Seperation processes, Environmental Engineering, and Waste Management.

  12. Savannah River Technology Center monthly report

    Energy Technology Data Exchange (ETDEWEB)

    1992-10-01

    This document contains many small reports from personnel at the technology center under the umbrella topics of reactors, tritium, separations, environment, waste management, and general engineering. Progress and accomplishments are given.

  13. NASA(Field Center Based) Technology Commercialization Centers

    Science.gov (United States)

    1995-01-01

    Under the direction of the IC(sup 2) Institute, the Johnson Technology Commercialization Center has met or exceeded all planned milestones and metrics during the first two and a half years of the NTCC program. The Center has established itself as an agent for technology transfer and economic development in- the Clear Lake community, and is positioned to continue as a stand-alone operation. This report presents data on the experimental JTCC program, including all objective measures tracked over its duration. While the metrics are all positive, the data indicates a shortage of NASA technologies with strong commercial potential, barriers to the identification and transfer of technologies which may have potential, and small financial return to NASA via royalty-bearing licenses. The Center has not yet reached the goal of self-sufficiency based on rental income, and remains dependent on NASA funding. The most important issues raised by the report are the need for broader and deeper community participation in the Center, technology sourcing beyond JSC, and the form of future funding which will be appropriate.

  14. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A.Ebadian

    1999-02-28

    Search for decontamination technologies to be assessed at FIU-HCET continues. Bartlett Nuclear Inc. returned to FIU-HCET on February 15-19, 1999, to complete the demonstration of coating removal from concrete ceiling and aggressive contamination removal on uncoated concrete wall using their Robotic Climber. The design of test beds for large-scale technology demonstration of blockage locating and pipe unplugging has undergone major revision. The lab-scale test loop is also under modification. A new sampling system using isokinetic principles and consisting of thermistors, flow controller, and Wheatstone bridge will be installed on the flow loop. FIU-HCET International Coordinator attended the VII Steering Committee meeting in Lima, Peru, on February 11-12, 1999, and successfully introduced the Interactive Communication Website. Additional agenda items on the Website were proposed by the Steering Committee for upcoming committee meetings and working groups.

  15. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-06-30

    To enhance the measurement capability of EICs to alpha spectrometry, measurements at FIU-HCET were performed on different energy alpha sources, and response factors of ST electrets in 960-mL chamber were determined. Earlier, EIC was considered as only a charge-integrating device without spectrometric capability. This is a potentially significant development accomplished by FIU-HCET. It could appreciably lower the current cost of spectral characterization. FIU-HCET has been invited to participate in the Operating Engineers' National Hazmat program's assessment of the Mini Mitter, commercially known as the VitalSense{trademark} Telemetric Monitoring System. This evaluation is scheduled for early July 1999. Additional health and safety technology evaluations, in which FIU-HCET will also participate, are also scheduled for later in the summer. The Technology Information System (TIS), MISD, and DASD are now complete and accessible through the Internet website http://www.DandD.org/tis.

  16. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-09-30

    The Princeton Plasma Physics Laboratory (PPPL) demonstration of the diamond wire cutting technology on the surrogate of the Tokamak Fusion Test Reactor (TFTR), Figure 1, was performed from August 23-September 3, 1999. The plated diamond wire, Figure 2, was successful in cutting through all components of the TFTR surrogate including stainless steel, inconel and graphite. The demonstration tested three different void fill materials (mortar with sand, Rheocell-15, and foam) and three cooling systems (water, air, and liquid nitrogen). The optimum combination was determined to be the use of the low-density concrete void fill, Rheocell-15 with an average density of 52 lbs/ft{sup 3}, using a water coolant. However, the liquid nitrogen performed better than expected with only minor problems and was considered to be a successful demonstration of the Bluegrass Concrete Cutting, Inc. proprietary liquid-nitrogen coolant system. Data from the demonstration is being calculated and a summary of the technology demonstration will be included in the October monthly report. An ITSR will be written comparing the diamond wire saw to the plasma arc (baseline) technology. The MTR Chemical Protective Suit, a proprietary new suit from Kimberly Clark, was evaluated from 8/9/99 to 8/12/99 at Beaver, WV. This particular suit was tested on subjects performing three different tasks: climbing through a horizontal confined space, vertical confined space (pit), and loading and unloading material using a wheel barrow. Multiple test subjects performed each task for 20 minutes each. Performance of the innovative suit was compared to two commonly used types of protective clothing. Vital statistics, including body temperature and heart rate, were continuously monitored and recorded by an authorized physician. A summary of the demonstration will be included in the October monthly report. Along with the MTR Chemical Protective Suit, the VitalSense{trademark} Telemetric Monitoring System from Mini Mitter

  17. Technologies for Learner-Centered Feedback

    Science.gov (United States)

    Costello, Jane; Crane, Daph

    2013-01-01

    As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes.…

  18. Center for Assistive Technology & Environmental Access

    Science.gov (United States)

    ... new address and college name * The Center for Assistive Technology and Environmental Access Georgia Institute of Technology (GT) College of Design 512 Means St., Suite 300, Atlanta, GA 30332-0156 (for shipping, please use 30318) U.S.A. Phone: 404-894-4960 (v/tty) ... | Privacy Agreement

  19. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    2000-01-31

    The Online Measurement of Decontamination project team received a commitment for a demonstration in May from the Sacramento (California) Municipal Utility District (SMUD) Rancho Seco site. Since this site is a member of the DOE Commercial Utilities Consortium, the demonstration will fulfill the DOE and commercial technology demonstration requirements. Discussion on deployment of the Integrated Vertical and Overhead Decontamination (IVOD) System at Rancho Seco was conducted; date for deployment tentatively scheduled for early spring. Based upon fictional requirements from SRS for a shiny monitor in a high-level waste tank, FIU-HCET developed and delivered a draft slurry monitor design and draft test plan. Experiments measuring slurry settling time for SRS slurry simulant at 10 wt% have been completed on FIU-HCET'S flow loop with SRS dip. The completed design package of the test mockup for evaluating Non-Intrusive Location of Buried Items Technologies was sent to Fluor Fernald and the Operating Engineers National Hazmat Program for review. Comments are due at the end of January. Preliminary experiments to determine size distribution of aerosols generated during metal cutting were performed. A 1/4-inch-thick iron plate was cut using a plasma arc torch, and the size distribution of airborne particles was measured using a multistage impactor. Per request of DOE-Ohio, FIU-HCET participated in a weeklong value engineering study for the characterization, decontamination, and dismantlement of their critical path facility.

  20. Satisloh centering technology developments past to present

    Science.gov (United States)

    Leitz, Ernst Michael; Moos, Steffen

    2015-10-01

    The centering of an optical lens is the grinding of its edge profile or contour in relationship to its optical axis. This is required to ensure that the lens vertex and radial centers are accurately positioned within an optical system. Centering influences the imaging performance and contrast of an optical system. Historically, lens centering has been a purely manual process. Along its 62 years of assembling centering machines, Satisloh introduced several technological milestones to improve the accuracy and quality of this process. During this time more than 2.500 centering machines were assembled. The development went from bell clamping and diamond grinding to Laser alignment, exchange chuckor -spindle systems, to multi axis CNC machines with integrated metrology and automatic loading systems. With the new centering machine C300, several improvements for the clamping and grinding process were introduced. These improvements include a user friendly software to support the operator, a coolant manifold and "force grinding" technology to ensure excellent grinding quality and process stability. They also include an air bearing directly driven centering spindle to provide a large working range of lenses made of all optical materials and diameters from below 10 mm to 300 mm. The clamping force can be programmed between 7 N and 1200 N to safely center lenses made of delicate materials. The smaller C50 centering machine for lenses below 50 mm diameter is available with an optional CNC loading system for automated production.

  1. Ferruginous hawks on the Yakima Training Center

    Energy Technology Data Exchange (ETDEWEB)

    Mazaika, R.; Cadwell, L.L.

    1994-07-01

    Habitat quality for ferruginous hawks (Buteo regalis) is largely determined by availability of nest sites and adequate prey base. A limitation of one of these will limit the number of hawks in an area. In general, ferruginous hawks are adaptable to various nesting substrates and will nest in proximity to other closely related sympatric species (e.g., red-tailed hawk, Swainson`s hawk). This analysis focused on an assessment of prey base availability and habitat disturbance in the vicinity of historic nest sites and small mammal trap sites on the Yakima Training Center (YTC) in Washington State. The primary ground-disturbing activities on the YTC are associated with military training, fire, and grazing. In addition to the direct effect these activities can have on ferruginous hawks, indirect effects may result from changes in composition, density, and structure of vegetation that subsequently alter faunal population numbers and species diversity. A summary of results of small mammal trapping, population estimation, vegetative analysis and disturbance rating at seven trap sites during the time period of June through August of 1993 are presented.

  2. Findings from Survey Administered to Weatherization Training Centers

    Energy Technology Data Exchange (ETDEWEB)

    Conlon, Brian [Univ. of Tennessee, Knoxville, TN (United States); Tonn, Bruce Edward [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-03-01

    This report summarizes results of a survey administered to directors of weatherization training centers that receive funding from the U.S. Department of Energy. The survey presents results related to questions on training offered and future plans.

  3. ELECTRIC INFRASTRUCTURE TECHNOLOGY, TRAINING, AND ASSESSMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    TREMEL, CHARLES L

    2007-06-28

    The objective of this Electric Infrastructure Technology, Training and Assessment Program was to enhance the reliability of electricity delivery through engineering integration of real-time technologies for wide-area applications enabling timely monitoring and management of grid operations. The technologies developed, integrated, tested and demonstrated will be incorporated into grid operations to assist in the implementation of performance-based protection/preventive measures into the existing electric utility infrastructure. This proactive approach will provide benefits of reduced cost and improved reliability over the typical schedule-based and as needed maintenance programs currently performed by utilities. Historically, utilities have relied on maintenance and inspection programs to diagnose equipment failures and have used the limited circuit isolation devices, such as distribution main circuit breakers to identify abnormal system performance. With respect to reliable problem identification, customer calls to utility service centers are often the sole means for utilities to identify problem occurrences and determine restoration methodologies. Furthermore, monitoring and control functions of equipment and circuits are lacking; thus preventing timely detection and response to customer outages. Finally, the two-way flow of real-time system information is deficient, depriving decision makers of key information required to effectively manage and control current electric grid demands to provide reliable customer service in abnormal situations. This Program focused on advancing technologies and the engineering integration required to incorporate them into the electric grid operations to enhance electrical system reliability and reduce utility operating costs.

  4. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-05-15

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  5. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-11-04

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  6. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  7. Scientific and educational center "space systems and technology"

    Science.gov (United States)

    Kovalev, I. V.; Loginov, Y. Y.; Zelenkov, P. V.

    2015-10-01

    The issues of engineers training in the aerospace university on the base of Scientific and Educational Center "Space Systems and Technology" are discussed. In order to improve the quality of education in the Siberian State Aerospace University the research work of students, as well as the practice- oriented training of engineers are introduced in the educational process. It was made possible as a result of joint efforts of university with research institutes of the Russian Academy of Science and industrial enterprises. The university experience in this area promotes the development of a new methods and forms of educational activities, including the project-oriented learning technologies, identifying promising areas of specialization and training of highly skilled engineers for aerospace industry and other institutions. It also allows you to coordinate the work of departments and other units of the university to provide the educational process in workshops and departments of the industrial enterprises in accordance with the needs of the target training. Within the framework of scientific and education center the students perform researches, diploma works and master's theses; the postgraduates are trained in advanced scientific and technical areas of enterprise development.

  8. Center for Coastline Security Technology, Year 3

    Science.gov (United States)

    2008-05-01

    Figure 2.6.8: Close-Up Photograph of RPUUV Tail Section. Figure 2.6.9: Force and moments applied on a hydrofoil . Figure 2.6.10: The NACA 21016... hydrofoil profile. Florida Atlantic University 4/28/08 Page 10 Center for Coastline Security Technology Year Three-Final Report Figure...as a 3D wing with a NACA 21016 hydrofoil profile (Figure 2.6.10) held by 3 cylinders (Figure 2.6.8). Center for Coastline Security Technology Year

  9. 2017 Technology Showcase | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The 2017 Technology Showcase is an inaugural, half-day event that will showcase technologies developed by the National Cancer Institute's Center for Cancer Research (CCR) and the Frederick National Laboratory for Cancer Research (FNLCR). The goal of the Showcase is to encourage startup company formation, technology licensing, and public-private collaborations. It will introduce the Frederick community to the regional technology development stakeholders, as well as highlight available resources. WHO SHOULD ATTEND: Prospective investors, established companies, educators, those looking to commercialize technologies, and all interested stakeholders. | [google6f4cd5334ac394ab.html

  10. Technologies for learner-centered feedback

    Directory of Open Access Journals (Sweden)

    Jane Costello

    2013-09-01

    Full Text Available As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes. Feedback, types of feedback, guidelines for effective learner-centered feedback, and feedback’s relationship to assessment are presented. Methods of providing feedback, for example, automated, audio scribe pens, digital audio, etc., and the related technologies are described. Technologies that allow instructors to make informed decisions about the use of various methods for feedback are discussed.

  11. Today's Training in the High Technology Arena

    Science.gov (United States)

    Baylis, William T.

    1995-01-01

    To keep in tune with the rapidly changing 'Hardware' technology, it is imperative that all of the supporting components of a program's efforts reflect these increases in technology. To maintain a work force that keeps in tune with the ever increasing technology base, training needs to remain a major consideration in all types of organizations. This paper focuses on the area of training and education and suggests a reasonable, cost effective alternative to carrying the entire burden of developing, training and maintaining a workforce in a rapidly changing, highly technological environment.

  12. Opportunities of artistic and technological training in non-formal education

    Directory of Open Access Journals (Sweden)

    Natalya Ivkina

    2015-04-01

    Full Text Available The paper deals with questions concerning the organization of art and technological training in the situation of informal education; experience including application of information technologies and network services in the work of the Center work.

  13. License Agreements | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Since the government cannot engage in the development, manufacture, and sale of products, the NCI Technology Transfer Center (TTC) makes its discoveries (and discoveries from nine other NIH Institutes) available to organizations that can assist in the further development and commercialization of these basic science discoveries, to convert them into public health benefits. | [google6f4cd5334ac394ab.html

  14. About TTC | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute’s Technology Transfer Center (TTC) facilitates partnerships between the NIH research laboratories and external partners, and helping to accelerate development of cutting-edge research by connecting our partners to NIH’s world-class facilities, resources, and discoveries. Contact us to learn more. | [google6f4cd5334ac394ab.html

  15. Marshall Space Flight Center Technology Investments Overview

    Science.gov (United States)

    Tinker, Mike

    2014-01-01

    NASA is moving forward with prioritized technology investments that will support NASA's exploration and science missions, while benefiting other Government agencies and the U.S. aerospace enterprise. center dotThe plan provides the guidance for NASA's space technology investments during the next four years, within the context of a 20-year horizon center dotThis plan will help ensure that NASA develops technologies that enable its 4 goals to: 1.Sustain and extend human activities in space, 2.Explore the structure, origin, and evolution of the solar system, and search for life past and present, 3.Expand our understanding of the Earth and the universe and have a direct and measurable impact on how we work and live, and 4.Energize domestic space enterprise and extend benefits of space for the Nation.

  16. Technology of physical training young footballers

    Directory of Open Access Journals (Sweden)

    Valery Nikolaenko

    2015-10-01

    Full Text Available Purpose: to prove the technology of physical training of young players. Material and Methods: pedagogical observation and analysis of literature, both in the field of football, sports physiology and in the use of technologies that protect the health of the process of physical training of young athletes. Results: notes the need to review approaches to the organization of long-term preparation of sportsmen. It established the contradiction between the increasing demand for training of young sportsmen and features of the growing organism. Conclusion: the ways of rational construction of training process on the basis of the strategy of preparation of sports reserve and health at talented youth

  17. Hazardous Materials Management and Emergency Response training Center needs assessment

    Energy Technology Data Exchange (ETDEWEB)

    McGinnis, K.A. [Westinghouse Hanford Co., Richland, WA (United States); Bolton, P.A. [Pacific Northwest Lab., Richland, WA (United States); Robinson, R.K. [RKR, Inc. (United States)

    1993-09-01

    For the Hanford Site to provide high-quality training using simulated job-site situations to prepare the 4,000 Site workers and 500 emergency responders for known and unknown hazards a Hazardous Materials Management and Emergency Response Training Center is needed. The center will focus on providing classroom lecture as well as hands-on, realistic training. The establishment of the center will create a partnership among the US Department of Energy; its contractors; labor; local, state, and tribal governments; and Xavier and Tulane Universities of Louisiana. This report presents the background, history, need, benefits, and associated costs of the proposed center.

  18. Training for New Manufacturing Technologies.

    Science.gov (United States)

    Jacobs, James

    1988-01-01

    Examines the effects of computer-based manufacturing technologies on employment opportunities and job skills. Describes the establishment of the Industrial Technology Institute in Michigan to develop and utilize advanced manufacturing technologies, and the institute's relationship to the state's community colleges. Reviews lessons learned from…

  19. Training for New Manufacturing Technologies.

    Science.gov (United States)

    Jacobs, James

    1988-01-01

    Examines the effects of computer-based manufacturing technologies on employment opportunities and job skills. Describes the establishment of the Industrial Technology Institute in Michigan to develop and utilize advanced manufacturing technologies, and the institute's relationship to the state's community colleges. Reviews lessons learned from…

  20. The Hydrogen Technology Center at Wyle Laboratories

    Science.gov (United States)

    Wheelock, H.; Smith, D.; Frazier, J.

    1990-10-01

    A deactivated storable propellant test area with numerous test cells, large open concrete pads of up to 65-ft length, and two enclosed metal storage buildings, has been converted into a Hydrogen Technology Center. The conversion strategy involved extensive use of modified surplus equipment, well established testing technologies, and innovative engineering to obviate long-delivery time items. Simple, high heat flux water-to-cryogen heat exchangers are used to generate ambient temperature H2 and N gas. Hydrogen-fueled combustors were designed and fabricated to power the specialized heat exchangers required to support high-temperature hydrogen experiments. The facility has operated productively and safely since October, 1988.

  1. Seed technology training in the year 2000

    Directory of Open Access Journals (Sweden)

    McDonald M.B.

    1998-01-01

    Full Text Available Seed quality will remain the centerpiece of successful agricultural programs in the year 2000. As new changes occur in agriculture driven by advancements in biotechnology, seed enhancement technologies, a more diverse seed user clientele, and communication technologies, successful seed companies will require a knowledgeable and informed workforce to assure high seed quality. A new approach to seed technology training is professed that relies on the establishment of a three-institution consortium to achieve this objective. Advantages of the consortium are identified that emphasize the unique strengths of each institution, their geographic advantages representing major climactic/agricultural zones in the world, and differing approaches to seed technology training that are facilitated by increasing ease of global communication. This may be a better way to conduct seed technology training in the year 2000.

  2. Mission & Role | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The NCI TTC serves as the focal point for implementing the Federal Technology Transfer Act to utilize patents as incentive for commercial development of technologies and to establish research collaborations and licensing among academia, federal laboratories, non-profit organizations, and industry. The TTC supports technology development activities for the National Cancer Institute and nine other NIH Institutes and Centers. TTC staff negotiate co-development agreements and licenses with universities, non-profit organizations, and pharmaceutical and biotechnology companies to ensure compliance with Federal statutes, regulations and the policies of the National Institutes of Health. TTC also reviews employee invention reports and makes recommendations concerning filing of domestic and foreign patent applications. | [google6f4cd5334ac394ab.html

  3. training health center in Northwest Ethiopia

    African Journals Online (AJOL)

    clinics at a training health centre in Northwest Ethiopia. The records of 364 ... Medicine, Addis Ababa University, P.O.Box. 24762, Code ..... Antenatal care clinic choices and Reported. Activities of ANC ... Mesfin M, Farrow J. Determinants of.

  4. Multimedia in the Writing Center: Visual Rhetoric and Tutor Training

    OpenAIRE

    Conard-Salvo, Tammy

    2006-01-01

    This presentation at the Conference on College Composition and Communication (CCCC) discusses the impact that multimedia projects have on writing centers and offers one model for integrating a visual rhetoric unit in an undergraduate tutor training course.

  5. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  6. Safeguards technology and computer security training

    Energy Technology Data Exchange (ETDEWEB)

    Hunteman, W.J.; Zack, N.R.

    1992-01-01

    The Los Alamos National Laboratory Safeguards Systems Group provides a variety of training services to the federal government and its contractors. The US Department of Energy sponsors a Safeguards Technology Training Program at Los Alamos in which seminars are offered concerning materials accounting for nuclear safeguards, measurement control for materials accounting, and variance propagation and systems analysis. These seminars provide guidance and techniques for accounting for nuclear material, developing and quantifying quality nuclear material measurements, and assessing overall accounting system performance. The Safeguards Systems Group also provides training in computer and data security applications; i.e., a workshop and the Los Alamos Vulnerability/Risk Assessment System (LAVA), computer system security officer training, and nuclear material safeguards for managers training, which are available on request. This paper describes the purpose, content, and expected benefits of the training activities that can be applied at nuclear materials facilities or where there are computer and/or data security concerns.

  7. Safeguards technology and computer security training

    Energy Technology Data Exchange (ETDEWEB)

    Hunteman, W.J.; Zack, N.R.

    1992-09-01

    The Los Alamos National Laboratory Safeguards Systems Group provides a variety of training services to the federal government and its contractors. The US Department of Energy sponsors a Safeguards Technology Training Program at Los Alamos in which seminars are offered concerning materials accounting for nuclear safeguards, measurement control for materials accounting, and variance propagation and systems analysis. These seminars provide guidance and techniques for accounting for nuclear material, developing and quantifying quality nuclear material measurements, and assessing overall accounting system performance. The Safeguards Systems Group also provides training in computer and data security applications; i.e., a workshop and the Los Alamos Vulnerability/Risk Assessment System (LAVA), computer system security officer training, and nuclear material safeguards for managers training, which are available on request. This paper describes the purpose, content, and expected benefits of the training activities that can be applied at nuclear materials facilities or where there are computer and/or data security concerns.

  8. User-centered Technologies For Blind Children

    Directory of Open Access Journals (Sweden)

    Jaime Sánchez

    2008-01-01

    Full Text Available The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathematical skills, navigation and orientation, and problem solving of blind children. Findings indicate significant improvements in learning and cognition from using audio-based tools specially tailored for the blind. That is, technologies for blind children, carefully tailored through user-centered design approaches, can make a significant contribution to cognitive development of these children. This paper contributes new insight into the design and implementation of audio-based virtual environments to facilitate learning and cognition in blind children.

  9. Utilization of a virtual environment for combat information center training

    OpenAIRE

    Kapp, John J

    1997-01-01

    Approved for public release; distribution is unlimited Recent fiscal and personnel cutbacks have placed significant restrictions on surface ship training opportunities. As a result, additional methods of training must be established in order to maintain current operational readiness. This thesis research investigates the use of a workstation based shipboard virtual environment (VE) as complementary training for naval personnel, in particular, in the combat information center (CIC). The app...

  10. CENTER FOR ADVANCED SEPARATION TECHNOLOGY (CAST) PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan; Hull, Christopher

    2014-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations.

  11. Command Center Training Tool (C2T2)

    Science.gov (United States)

    Jones, Phillip; Drucker, Nich; Mathews, Reejo; Stanton, Laura; Merkle, Ed

    2012-01-01

    This abstract presents the training approach taken to create a management-centered, experiential learning solution for the Virginia Port Authority's Port Command Center. The resultant tool, called the Command Center Training Tool (C2T2), follows a holistic approach integrated across the training management cycle and within a single environment. The approach allows a single training manager to progress from training design through execution and AAR. The approach starts with modeling the training organization, identifying the organizational elements and their individual and collective performance requirements, including organizational-specific performance scoring ontologies. Next, the developer specifies conditions, the problems, and constructs that compose exercises and drive experiential learning. These conditions are defined by incidents, which denote a single, multi-media datum, and scenarios, which are stories told by incidents. To these layered, modular components, previously developed meta-data is attached, including associated performance requirements. The components are then stored in a searchable library An event developer can create a training event by searching the library based on metadata and then selecting and loading the resultant modular pieces. This loading process brings into the training event all the previously associated task and teamwork material as well as AAR preparation materials. The approach includes tools within an integrated management environment that places these materials at the fingertips of the event facilitator such that, in real time, the facilitator can track training audience performance and resultantly modify the training event. The approach also supports the concentrated knowledge management requirements for rapid preparation of an extensive AAR. This approach supports the integrated training cycle and allows a management-based perspective and advanced tools, through which a complex, thorough training event can be developed.

  12. Training Center for Industrial Control Systems

    Directory of Open Access Journals (Sweden)

    V. Yezhov

    2013-01-01

    Full Text Available We consider the application of embedded microcontrollers and industrial controllers with built-in operating systems.With the development of embedded operating systems and technology of open standard IEC 61131-3 product developer can write their own program management and support staff – to modernize management program.

  13. Tiger Team Assessment, Energy Technology Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

  14. Training Doctors for Person-Centered Care.

    Science.gov (United States)

    English, Jeannine

    2016-03-01

    Person-centered care, in which an individual patient's goals and preferences are treated as paramount, should be the standard throughout the nation. Achieving this ideal will require a change in the culture of health care, and medical schools can play a vital role in helping achieve it. Lack of communication, uncoordinated services, and dealings with sometimes-aloof clinicians and staff all can increase stress and undermine a person's sense of well-being. In a person-centered system, such experiences would be much less common. The cultural shift starts with the idea of "engaging the consumer" rather than "treating the patient." Such engagement requires honoring individuality. The doctor may have a certain way of doing things. But people vary enormously in their values and priorities. They have different goals, different thresholds of pain, different anxieties, different needs for support, different backgrounds, and different resources to draw on. Individuals should feel empowered, aware of their choices, and connected to their health care providers through meaningful communication and understanding. They deserve to feel that their personal dignity and their wishes are a top priority. They should be made to feel that they, along with their caregivers, are members of the care team. This change will benefit not only patients and families but doctors as well. Doctors will benefit from more insight into the individuals they serve, their interactions with consumers and caregivers will be more positive, and the quality of care will improve.

  15. New Technologies to Assist Training in Hospitality Sector

    Science.gov (United States)

    Balta, Sabah

    2007-01-01

    Hospitality sector needs new technological training tools, which can assist to improve sector employees' skills and services quality. The sector might be more interactive when these technological training tools used on the job-training program. This study addresses to issue of illumination of new technologic tools that enforce training in which…

  16. Exemplary Training Models in Industrial Technology.

    Science.gov (United States)

    Hatton, Michael J., Comp.

    Prepared by Canadian, Chinese Taipei, and Thai educational agencies and based on surveys of Asia Pacific Economic Cooperation member nations, this report provides descriptions of 52 exemplary industrial technology training models in Australia, Brunei, Canada, Chinese Taipei, Hong Kong, Malaysia, New Zealand, the Philippines, the People's Republic…

  17. Wind Energy Technology: Training a Sustainable Workforce

    Science.gov (United States)

    Krull, Kimberly W.; Graham, Bruce; Underbakke, Richard

    2009-01-01

    Through innovative teaching and technology, industry and educational institution partnerships, Cloud County Community College is preparing a qualified workforce for the emerging wind industry estimated to create 80,000 jobs by 2020. The curriculum blends on-campus, on-line and distance learning, land-lab, and field training opportunities for…

  18. Wind Energy Technology: Training a Sustainable Workforce

    Science.gov (United States)

    Krull, Kimberly W.; Graham, Bruce; Underbakke, Richard

    2009-01-01

    Through innovative teaching and technology, industry and educational institution partnerships, Cloud County Community College is preparing a qualified workforce for the emerging wind industry estimated to create 80,000 jobs by 2020. The curriculum blends on-campus, on-line and distance learning, land-lab, and field training opportunities for…

  19. Faculty and Technology: Implications for Faculty Training and Technology Leadership

    Science.gov (United States)

    Keengwe, Jared; Kidd, Terry; Kyei-Blankson, Lydia

    2009-02-01

    The purpose of this study was to explore the factors affecting ICT adoption process and the implications for faculty training and technology leadership. Respondents represented a wide range of academic and professional positions. They identified themselves as Assistant, Associate, and Professor as well as Instructional Designer, Director of Technology, Information Manager, eLearning Manager, Assistant Department Chair, Associate Vice President of Academic Affairs and Consultant. The respondents identified Organizational Support, Leadership, Training and Development, and Resources as the predominate themes affecting Information and Communication Technology (ICT) adoption process in higher education. Evidence from this study offers insights on how higher education administrators and technology leaders could help their faculty and staff to implement appropriate ICT tools and practices to improve student learning.

  20. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  1. Scientific Data Management Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Vouk, Mladen A.

    2013-01-15

    Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Fortunately, the data management problems encountered by most scientific domains are common enough to be addressed through shared technology solutions. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation, analysis, or visualization engine. These processes are complicated by the fact that scientific data are structured differently for specific application domains, and are stored in specialized file formats. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Specialized feature discovery and statistical analysis techniques are needed before the data can be understood or visualized. Furthermore, interactive analysis requires techniques for efficiently selecting subsets of the data. Finally, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration. The SDM center was established under the SciDAC program to address these issues. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced

  2. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Hull

    2009-10-31

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

  3. Leveraging Gaming Technology to Deliver Effective Training

    Science.gov (United States)

    Cimino, James D.

    2011-01-01

    The best way to engage a soldier is to present them with training content consistent with their learning preference. Blended Interactive Multimedia Instruction (IMI) can be used to leach soldiers what they need to do, how to do each step, and utilize a COTS game engine to actually practices the skills learned. Blended IMI provides an enjoyable experience for the soldier, thereby increasing retention rates and motivation while decreasing the time to subject mastery. And now mobile devices have emerged as an exciting new platform, literally placing the training into the soldier's hands. In this paper, we will discuss how we leveraged commercial game engine technology, tightly integrated with the Blended IMI, to train soldiers on both laptops and mobile devices. We will provide a recent case study of how this training is being utilized, benefits and student/instructor feedback.

  4. Faculty and Technology: Implications for Faculty Training and Technology Leadership

    Science.gov (United States)

    Keengwe, Jared; Kidd, Terry; Kyei-Blankson, Lydia

    2009-01-01

    The purpose of this study was to explore the factors affecting ICT adoption process and the implications for faculty training and technology leadership. Respondents represented a wide range of academic and professional positions. They identified themselves as Assistant, Associate, and Professor as well as Instructional Designer, Director of…

  5. Motivation of fitness center participants toward resistance training.

    Science.gov (United States)

    Kathrins, Bess P; Turbow, David J

    2010-09-01

    There is a need to better understand the behavior and sense of motivation of fitness center participants. The purpose of this study was to assess whether or not demographic characteristics and health self-determinism (intrinsic or extrinsic motivation) of fitness center participants were predictive of their levels of resistance training. A cross-sectional design was used; participants were recruited via the Internet to complete an online survey. There were 185 participants (age = 39.1 +/- 11.3 years) in the study. The majority of respondents reported having carried out levels of resistance training that met national health organization recommendations. Regression analysis of the data revealed that health self-determinism predicted quantity of resistance training reported (p = 0.014), whereas demographics did not. Being intrinsically motivated to health self-determinism predicted meeting national resistance training recommendations compared to participants extrinsically motivated (p = 0.007). For those who work with fitness center participants, our findings are useful by identifying participants as a predominantly intrinsically motivated group of people that performs adequate quantities of resistance training; the methodology employed in this study can be used to identify participants in need of increased levels of resistance training and heightened sense of motivation to do so.

  6. FSE - Center for research, training and development. The Siemens Building Technologies office building at Frankfurt, Main; Forschungs-, Schulungs- und Entwicklungszentrum (FSE). Firmengebaeude der Siemens Building Technologies in Frankfurt/Main

    Energy Technology Data Exchange (ETDEWEB)

    Schmid, W.

    2003-07-01

    The new office building of Siemens Building Technologies (SBT) is described. Apart from an impressive architecture, the system also has a state-of-the-art facility management system based on open protocols like Ethernet TCP/IP, BACnet and LONTalk. [German] Als sachlich-technisches Gebaeude mit einem Hang zum Understatement wurde der neue Firmensitz von Siemens Building Technologies (SBT) Deutschland errichtet. Aehnlich wie das Produkt-, System- und Dienstleistungsangebot entspricht das Forschungs-, Schulungs- und Entwicklungszentrum ''FSE'' ganz den Prinzipien Offenheit, Flexibilitaet und Standardisierung. Das in Systembauweise aus Stahlbetonfertigteilen erstellte Gebaeude vermittelt trotz wirtschaftlich orientierter Bescheidenheit ein hohes Mass an Identitaet und sachlicher Repraesentanz. In dem klar strukturierten Baukoerper mit eher klassischer Heizungs- und Lueftungstechnik ist die derzeit wohl modernste gewerkeuebergreifende Gebaeudeautomation installiert, die ganz auf offenen Protokollen wie Ethernet TCP/IP, BACnet und LONTalk aufbaut. (orig.)

  7. Peculiarities of us Border Guard Officers’ Training at the Federal Law Enforcement Training Center Using Online Campus

    Directory of Open Access Journals (Sweden)

    Bloshchynskyi Ihor

    2015-12-01

    Full Text Available Professional training of future US border guard officers at the Federal Law Enforcement Training Center using e-FLETC Online Campus has been substantiated in the article. Special attention has been paid to revealing such topical areas of Online Campus computer-based training modules (crime scene, driver training, drugs, firearms, health, interviewing, investigative, legal, mapping, maritime, officer safety, technology, terrorism, traffic stops, training that include over 120 lessons and 20 videos which are available on a wide range of topics. Web-based training lessons which include topics such as counterterrorism, crime scene preservation and documentation, disaster, crisis and emergency strategies and management, domestic violence, drug endangered children, drug related crimes, elder abuse, firearms, fitness and healthy lifestyles, human trafficking, interacting with special needs populations, intelligence led policing, interpersonal skills and conflict management, interviews and interrogations, investigating technology related crimes (protecting and collecting digital evidence, investigative skills and techniques, knowledge of laws and regulations, leadership and management, lessons learned (previous case analysis, maritime law enforcement, etc. have been revealed. Besides, examples of “Firearms” and “Use of Force” curricula in e-FLETC Online Campus have been presented.

  8. Center for Global Health announces grants to support portable technologies

    Science.gov (United States)

    NCI's Center for Global Health announced grants that will support the development and validation of low-cost, portable technologies. These technologies have the potential to improve early detection, diagnosis, and non-invasive or minimally invasive treatm

  9. Preparing U.S. Coast Guard Junior Enlisted Members to Become Petty Officers at a Petaluma Training Center

    Science.gov (United States)

    Lincoln, Stefanie

    2009-01-01

    This 2008 Award of Excellence study describes how the Coast Guard Training Center in Petaluma, California, used human performance technology principles to identify and improve performance problems among a student population of young enlisted members. The solution system centered around the creation of a program that set expectations and standards…

  10. Applied technology center business plan and market survey

    Science.gov (United States)

    Hodgin, Robert F.; Marchesini, Roberto

    1990-01-01

    Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

  11. The Technology to Train Techniques in Sports

    Directory of Open Access Journals (Sweden)

    Vladimir E. Afonshin

    2016-03-01

    Full Text Available The training session of technical techniques is proposed to conduct on the playing ground where computer-controlled light emitters create allowed and unallowed light dynamic zones. Each athlete is to be placed in one of the allowed zones and to execute with an implement some techniques directed with his breast on the light guide mark created outside the allowed zone. The athlete holding an implement is not allowed to go out of the permitted area. In the course of the training session unpredictably for an athlete the position, the shape and the area of the permitted and unallowed zones is changed. The athlete’s going into the unallowed zone or performing techniques in the position not-oriented on the guide mark is considered to be an error. If the errors are none, the allowed zone area is reduced and the intensity of the session is increased until the athlete commits an error. By the minimum square of the allowed zone, the maximum speed of its movement that the athlete performing the exercise does not commit any errors, they evaluate the athlete’s technical skill. The proposed technology facilitates in faster mastering the play technique, unlocking the individual technical features and enhancing them at any stage of the professional career. The technology can be used for the technical training of athletes of different professional profiles specializing in football, hockey, handball, basketball and other sports that require implement handling.

  12. [The Sino-French emergency and disaster medicine training center].

    Science.gov (United States)

    Pourriat, Jean-Louis; Dahan, Benjamin; Lapandry, Claude

    2012-01-01

    French (AP-HP) and Chinese (Beijing Health Office) hospitals, with support from the French company Total, collaborated in order to improve Chinese doctors' knowledge of emergency and disaster medicine prior to the Beijing Olympic Games. A Sino-French emergency and disaster medicine training center was subsequently opened in Beijing in 2008, with the aim of providing high-level continuous medical training for Chinese specialists in emergency medicine. Teaching in the management of critical situations was based on the use of a latest-generation simulator (Sim 3G; Laerdal). This collaboration has had both pedagogical and diplomatic benefits.

  13. ALARA Center of Technology -- resource guide

    Energy Technology Data Exchange (ETDEWEB)

    Waggoner, L.O.

    1998-02-05

    The purpose is to provide a source of information that can be used to assist personnel in the planning, training, and execution of radiological work using the principles of ALARA. This document is not intended to replace HNF or WHC Control Manual requirements. The ALARA Tools-List provides detailed information on the use and procurement of engineered controls, mockup training guidelines, and good radiological work practices that have been proven to be ALARA.

  14. Factors predicting the use of technology: findings from the Center for Research and Education on Aging and Technology Enhancement (CREATE).

    Science.gov (United States)

    Czaja, Sara J; Charness, Neil; Fisk, Arthur D; Hertzog, Christopher; Nair, Sankaran N; Rogers, Wendy A; Sharit, Joseph

    2006-06-01

    The successful adoption of technology is becoming increasingly important to functional independence. The present article reports findings from the Center for Research and Education on Aging and Technology Enhancement (CREATE) on the use of technology among community-dwelling adults. The sample included 1,204 individuals ranging in age from 18-91 years. All participants completed a battery that included measures of demographic characteristics, self-rated health, experience with technology, attitudes toward computers, and component cognitive abilities. Findings indicate that the older adults were less likely than younger adults to use technology in general, computers, and the World Wide Web. The results also indicate that computer anxiety, fluid intelligence, and crystallized intelligence were important predictors of the use of technology. The relationship between age and adoption of technology was mediated by cognitive abilities, computer self-efficacy, and computer anxiety. These findings are discussed in terms of training strategies to promote technology adoption.

  15. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2003-11-15

    The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (a) Solid-solid separation (b) Solid-liquid separation (c) Chemical/Biological Extraction (d) Modeling and Control, and (e) Environmental Control. Distribution of funds is being handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. The first of these solicitations, referred to as the CAST II-Round 1 RFP, was issued on October 28, 2002. Thirty-eight proposals were received by the December 10, 2002 deadline for this RFP-eleven (11) Solid-Solid Separation, seven (7) Solid-Liquid Separation, ten (10) Chemical/Biological Extraction, six (6) Modeling & Control and four (4) Environmental Control. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. This process took some 7 months to complete but 17 projects (one joint) were in place at the constituent universities (three at Virginia Tech, two at West Virginia University, three at University of

  16. Emerging Technologies: Applications and Implications for School Library Media Centers.

    Science.gov (United States)

    Craver, Kathleen W.

    This paper examines emerging information technologies and their implications for school library media centers. Because of the fluctuating situation regarding new innovations, only emerging technologies that specialists believe will occur within the next 5 to 10 years are discussed. For each technology mentioned, a brief description is given…

  17. Inauguration of the Stoll Fashion & Technology Center

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ On April 1st 2009 the new Stoll Fashion & Technology showroom will be opened in New York.The new showroom is situated in the heart of the Garment District of Manhattan,New York and will present the opportunity to gain hands-on experience to the services of the Stoll Fashion & Technology world.The highlight of the inauguration at the 15.000 square feet showroom will be the introduction to the reinvented service approach as well as innovative projects under the Stoll Fashion & Technology Company.

  18. Marshall Space Flight Center ECLSS technology activities

    Science.gov (United States)

    Wieland, Paul

    1990-01-01

    Viewgraphs on Environmental Control and Life Support System (ECLSS) technology activities are presented. Topics covered include: analytical development; ECLSS modeling approach; example of water reclamation modeling needs; and hardware development and testing.

  19. SERAPHIM: A propulsion technology for fast trains

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, B.; Turman, B.; Marder, B.; Rohwein, G.; Aeschliman, D.; Cowan, B.

    1995-06-01

    The Segmented Rail Phased Induction Motor (SERAPHIM) is a compact, pulsed linear induction motor (LIM) offering a unique capability for very high speed train propulsion. It uses technology developed for the Sandia coilgun, an electromagnetic launcher designed to accelerate projectiles to several kilometers per second. Both aluminum cylinders and plates were accelerated to a kilometer per second (Mach 3) by passing through a sequence of coils which were energized at the appropriate time. Although this technology was developed for ultra-high velocity, it can be readily adapted to train propulsion for which, at sea level, the power required to overcome air resistance limits the operational speed to a more modest 300 mph. Here, the geometry is reversed. The coils are on the vehicle and the ``projectiles`` are fixed along the roadbed. SERAPHIM operates not by embedding flux in a conductor, but by excluding it. In this propulsion scheme, pairs of closely spaced coils on the vehicle straddle a segmented aluminum reaction rail. A high frequency current is switched on as a coil pair crosses an edge and remains off as they overtake the next segment. This induces surface currents which repel the coil. In essence, the pulsed coils push off segment edges because at the high frequency of operation, the flux has insufficient time to penetrate. In contrast to conventional LIMs, the performance actually improves with velocity, even for a minimal motor consisting of a single coil pair reacting with a single plate. This paper will present results of proof-of-principle tests, electromagnetic computer simulations, and systems analysis. It is concluded that this new linear induction motor can be implemented using existing technology and is a promising alternative propulsion method for very high speed rail transportation.

  20. The Impact of In-Service Technology Training Programmes on Technology Teachers

    Science.gov (United States)

    Gumbo, Mishack; Makgato, Moses; Muller, Helene

    2012-01-01

    The aim of this paper is to assess the impact the Advanced Certificate in Education (ACE) in-service technology training program has on technology teachers' knowledge and understanding of technology. The training of technology teachers is an initiative toward teachers' professional development within the mathematics, science, and technology sphere…

  1. Biological Semiconductors | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's Cancer Diagnostic Program and the Food and Drug Administration's Center for Devices and Radiological Health is seeking statements of capability or interest from parties interested in collaborative research to further develop, evaluate, or commercialize biological semiconductors as diagnostic sensors.

  2. Professional training for Internet of Things technology

    Directory of Open Access Journals (Sweden)

    S. B. Mohylnyi

    2016-06-01

    Full Text Available Introduction. Proposed concept for training "Internet of Things" technology within the framework of the speciality "Telecommunications and Radio Engineering". It is given a practice of organization and sequencing courses for students, which allows to teach them to design an entire system using Internet of Things. Main part. Internet of Things technologies require a wide range of knowledge and skills, it's building a unified data collection, their processing and forming control signals to the feedback circuit. Only single-step study with practical application allows you to learn to build such a system. Programming languages for IoT technology is a tool that lets you collaborate sensors with basic microcomputers, perform data processing for cloud services, work control signals. At each stage of construction IoT systems can be used in various programming languages, but preference should be given to those who support open operating systems. Conclusions. The feature of such course sequence is its practical-value content and its final result orientation.

  3. 20 CFR 670.505 - What types of training must Job Corps centers provide?

    Science.gov (United States)

    2010-04-01

    ... Operations § 670.505 What types of training must Job Corps centers provide? (a) Job Corps centers must provide basic education, vocational and social skills training. The Secretary provides curriculum... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What types of training must Job Corps centers...

  4. Second leader named at Center for Geospatial Information Technology

    OpenAIRE

    Trulove, Susan

    2006-01-01

    Stephen Prisley of Blacksburg, associate professor of forestry in the College of Natural Resources at Virginia Tech, will become the director of the university's Center for Geospatial Information Technology (CGIT) as of May 15.

  5. Academic Training: Physics technologies in medicine

    CERN Multimedia

    Françoise benz

    2005-01-01

    24, 25, 26, 27 January 2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES from 11.00 to 12.00 hrs - Main Auditorium, bldg. 500 Physics technologies in medicine M. GILARDI / Univ. of Milano, I. - U. AMALDI / Univ. of Milano Bicocca and TERA Foundation - M. SCHOLZ / GSI, Darmstadt, D. - O. JÄKEL / Deutsches Krebsforschungszentrum, Heidelberg, D Monday 24 January The frontiers of medical imaging M. GILARDI / Univ. of Milano, I. Tuesday 25 January From the discovery of X-rays to CT/PET diagnostics and conformal radiation therapy U. AMALDI / Univ. of Milano Bicocca and TERA Foundation Wednesday 26 January The increased biological effectiveness of heavy charged particle radiation: from cell culture experiments to biophysics modelling M. SCHOLZ / GSI, Darmstadt, D. Thursday 27 January Medical Physics aspects of radiotherapy with ions O. JÄKEL / Deutsches Krebsforschungszentrum, Heidelberg, D The lectures are open to all those interested, without application. The abstract of the lectures...

  6. Academic Training: Physics technologies in medicine

    CERN Multimedia

    Françoise Benz

    2005-01-01

    24, 25, 26, 27 January 2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES from 11.00 to 12.00 hrs - Main Auditorium, bldg. 500 Physics technologies in medicine M. GILARDI / Univ. of Milano, I. - U. AMALDI / Univ. of Milano Bicocca and TERA Foundation - M. SCHOLZ / GSI, Darmstadt, D. - O. JÄKEL / Deutsches Krebsforschungszentrum, Heidelberg, D Monday 24 January The frontiers of medical imaging M. GILARDI / Univ. of Milano, I. The lecture will deal with the evolution of diagnostic imaging techniques, focussing on tomographic methods (x rays Computerized Tomography, CT, Magnetic Resonance Imaging. MRI, Positron Emission Tomography, PET). The physical parameters characterizing the performance of current generation scanners and their potential future improvement will be discussed. The clinical diagnostic value of multi modal imaging and the relevance of image fusion to image guided radiotherapy will be also presented. Tuesday 25 January From the discovery of X-rays to CT/PET diagnostics and co...

  7. Vegetation studies, National Training Center, Fort Irwin, California

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, C.A.; Rickard, W.H.; Cadoret, N.A.

    1997-09-01

    During the spring of 1992, the Pacific Northwest National Laboratory (PNNL) conducted surveys of the Avawatz and Granite mountains springs for the National Training Center (NTC) to evaluate the occurrence of sensitive plant species in these areas. PNNL also conducted a survey of the eastern outwash of the Paradise Range for the occurrence of Lane Mountain milk vetch (Astragalus jaegerianus). In spring of 1993, PNNL conducted an additional study of Lane Mountain milk vetch on the NTC to determine habitat characteristics for this plant and to develop a method for predicting its potential occurrence, based on simple habitat attributes. The results of these studies are itemized.

  8. Naval Training Equipment Center Index of Technical Reports,

    Science.gov (United States)

    1982-09-01

    AINING DEVICE CENTER AND INDUSTRY *INFRARED DETECTORS TRAINING EQUIPMENT UTILIZING DEVICE - TERENCE (4TH) HELD AT ORLANDO, STATE-OF-THE- ART REVIEWS 8-I...AD-A059 572 STATE OF THE ART : 1964. Simulator (CATTS), Device 16A3. AD- 619 283 Volume I. Sections I through 4. *MAP PROJECTION AD-A038 796 DIGITAL...for Data Reduction Holography Emmett N. Leith 3,804,977 Colored Running Light Simulator Carl R. Driskell 3,808,413 Polar Resolver Urbano Manfredi

  9. An internet-based simulation system for training and development of regional-healthcare-centers managers.

    Science.gov (United States)

    Bregman, David; Korman, Arik; Shetach, Ana; Shalom, Nira

    2009-01-01

    RHCMS (Regional Healthcare Center Management System) is an Internet-based simulation training system for Regional Healthcare-Centers (RHCs) managers. The system is based on an integrative model, designed and developed by an interdisciplinary team of experts, for the purpose of training and developing RHCs' managers. This model involves the study of the following fields: healthcare management, business administration, organizational behavior, health economics, management science, and information technologies. The simulation system enables the operation of a management decision-making game. In the game, teams of trainees, playing management teams of RHCs, within one specific community, compete among themselves. The simulation focuses on managerial performance, based on periodic team-decisions, within the internal and external environmental context. The simulation game has a major potential contribution in enabling management trainees to transfer theoretical knowledge into managerial practical tools, capabilities and skills.

  10. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  11. 2017 Technology Showcase Presentations | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Presentations from the 2017 Technology Showcase by NIH Intramural Research Program scientists held at Frederick National Laboratories for Cancer Research on June 7, 2017. | [google6f4cd5334ac394ab.html

  12. Validation of the Training Benefit Forecasting Method: Grammar and Punctuation Training. Training and Development Research Center: Project Number Three.

    Science.gov (United States)

    Heidary, Farhood; And Others

    The validity of the Training Benefit Forecasting Method (TBFM) was studied in a Grammar and Punctuation Program conducted at Onan Corporation. The target population was composed of 10 workers who handled the document production in the organization's word processing center. Based on information gathered from the course instructor, participants, and…

  13. Marshall Space Flight Center Research and Technology Report 2016

    Science.gov (United States)

    Tinker, M. L.; Abney, M. B. (Compiler); Reynolds, D. W. (Compiler); Morris, H. C. (Compiler)

    2017-01-01

    Marshall Space Flight Center is essential to human space exploration and our work is a catalyst for ongoing technological development. As we address the challenges facing human deep space exploration, we advance new technologies and applications here on Earth, expand scientific knowledge and discovery, create new economic opportunities, and continue to lead global space exploration.

  14. Evaluating an Assistive Technology Resource Center in Taiwan

    Science.gov (United States)

    Ho, Hua-Kuo

    2010-01-01

    The purpose of this article is intended to present the procedure and outcomes of an evaluation of the Assistive Technology Resource Center in a city of Taiwan. The evaluation was initiated by Chiayi City Government through inviting three professionals in the field of assistive technology as evaluators. For the purpose of evaluation, the Executive…

  15. The Advanced Technology Environmental Education Center Summer Fellows Institute.

    Science.gov (United States)

    Depken, Diane E.; Zeman, Catherine L.; Lensch, Ellen Kabat; Brown, Edward J.

    2002-01-01

    Describes the background, activities, and outcomes of the Advanced Technology Environmental Education Center (ATEEC) and its Summer Fellows Institutes as a model for disciplinary and cross-disciplinary infusion of environmental science and technology content, curriculum, and methods into the classroom. Presents experiences, themes, and activities…

  16. SciDAC Visualization and Analytics Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Joy, Kenneth I. [Univ. of California, Davis, CA (United States)

    2014-09-14

    This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an "information big bang," which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies.

  17. Technology Transfer Center to Assume Patenting and Licensing Responsibilities | Poster

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) is undergoing a reorganization that will bring patenting and licensing responsibilities to the Shady Grove and Frederick offices by October 2015. The reorganization is a result of an effort begun in 2014 by NIH to improve the organizational structure of technology transfer at NIH to meet the rapid rate of change within science, technology, and industry, and to better align the science and laboratory goals with the licensing and patenting process.

  18. Technology Transfer Center to Assume Patenting and Licensing Responsibilities | Poster

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) is undergoing a reorganization that will bring patenting and licensing responsibilities to the Shady Grove and Frederick offices by October 2015. The reorganization is a result of an effort begun in 2014 by NIH to improve the organizational structure of technology transfer at NIH to meet the rapid rate of change within science, technology, and industry, and to better align the science and laboratory goals with the licensing and patenting process.

  19. Analysis of 10-Year Training Results of Medical Students Using the Microvascular Research Center Training Program.

    Science.gov (United States)

    Onoda, Satoshi; Kimata, Yoshihiro; Sugiyama, Narushi; Tokuyama, Eijiro; Matsumoto, Kumiko; Ota, Tomoyuki; Thuzar, Moe

    2016-06-01

    Background In this article, we reviewed the training results of medical students using the Microvascular Research Center Training Program (MRCP), and proposed an ideal microsurgical training program for all individuals by analyzing the training results of medical students who did not have any surgical experience. Methods As of 2015, a total of 29 medical students completed the MRCP. In the most recent 12 medical students, the number of trials performed for each training stage and the number of rats needed to complete the training were recorded. Additionally, we measured the operating time upon finishing stage 5 for the recent six medical students after it became a current program. Results The average operating time upon finishing stage 5 for the recent six medical students was 120 minutes ± 11 minutes (standard deviation [SD]). The average vascular anastomosis time (for the artery and vein) was 52 minutes ± 2 minutes (SD). For the most recent 12 medical students, there was a negative correlation between the number of trials performed in the non-rat stages (stages 1-3) and the number of rats used in the rat stages (stages 4-5). Conclusion Analysis of the training results of medical students suggests that performing microsurgery first on silicon tubes and chicken wings saves animals' lives later during the training program. We believe that any person can learn the technique of microsurgery by performing 7 to 8 hours of training per day over a period of 15 days within this program setting.

  20. Central Florida Film Production Technology Training Program. Final Report.

    Science.gov (United States)

    Valencia Community Coll., Orlando, FL.

    The Central Florida Film Production Technology Training program provided training to prepare persons for employment in the motion picture industry. Students were trained in stagecraft, sound, set construction, camera/editing, and post production. The project also developed a curriculum model that could be used for establishing an Associate in…

  1. Central Florida Film Production Technology Training Program. Curriculum.

    Science.gov (United States)

    Valencia Community Coll., Orlando, FL.

    The Central Florida Film Production Technology Training program provided training to prepare 134 persons for employment in the motion picture industry. Students were trained in stagecraft, sound, set construction, camera/editing, and post production. The project also developed a curriculum model that could be used for establishing an Associate in…

  2. The Use of Cloud Technology in Athletic Training Education

    Science.gov (United States)

    Perkey, Dennis

    2012-01-01

    As technology advances and becomes more portable, athletic training educators (ATEs) have many options available to them. Whether attempting to streamline efforts in courses, or operate a more efficient athletic training education program, portable technology is becoming an important tool that will assist the ATE. One tool that allows more…

  3. The Use of Cloud Technology in Athletic Training Education

    Science.gov (United States)

    Perkey, Dennis

    2012-01-01

    As technology advances and becomes more portable, athletic training educators (ATEs) have many options available to them. Whether attempting to streamline efforts in courses, or operate a more efficient athletic training education program, portable technology is becoming an important tool that will assist the ATE. One tool that allows more…

  4. Video Tutorials: A Sustainable Method for Campus Technology Training

    Science.gov (United States)

    Bowers, John; Dent, Julie; Barnes, Kathleen

    2009-01-01

    Technology training is a resource-intensive endeavor with inherent potential for waste. Such training is commonly offered in live, face-to-face workshops on campus, without charge, by colleges and universities who value technology skills in their faculty, staff, and students. The true cost to the institution begins with the space used for…

  5. TRAINING OLDER WORKERS FOR TECHNOLOGY-BASED EMPLOYMENT.

    Science.gov (United States)

    Lee, Chin Chin; Czaja, Sara J; Sharit, Joseph

    2009-01-01

    An increasingly aging workforce and advances in technology are changing work environments and structures. The continued employability of older adults, particularly those of lower socioeconomic status (SES), requires them to participate in training programs to ensure their competence in today's workplace. Focus groups with 37 unemployed adults (51-76 years old) were conducted to gather information about barriers and obstacles for returning to work, training needs and formats, work experiences, and perceptions of the characteristics of an ideal job. Overall, results indicated that participants experienced age discrimination and lack of technology skills. They also expressed a desire to receive additional training on technology and a preference for classroom training.

  6. 77 FR 43131 - Designation of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry...

    Science.gov (United States)

    2012-07-23

    ... Designation of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries (PCI... of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries (PCI... determined that the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries...

  7. Academic Training - Technological challenges of CLIC

    CERN Multimedia

    Françoise Benz

    2006-01-01

    2005-2006 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 12, 13, 14, 15 and 16 June 11:00-12:00 - Auditorium, bldg 500 Technological challenges of CLIC R. Corsini, S. Doebert, S. Redaelli, T.Lefevre, CERN-AB and G. Arnau Izquierdo, H. Mainaud, CERN-TS Future e+e- Linear Colliders offer the potential to explore new physics at the TeV scale and beyond to very high precision. While the International Linear Collider (ILC) scheme of a collider in the 0.5 - 1 TeV range enters the engineering design phase, the Compact Linear Collider (CLIC) study explores the technical feasibility of a collider capable of reaching into the multi-TeV energy domain. Key ingredients of the CLIC scheme are acceleration at high-frequency (30 GHz) and high-gradient (150 MV/m) in normal conducting structures and the use of the so-called Two Beam Acceleration concept, where a high-charge electron beam (drive beam) running parallel to the main beam is decelerated to provide the RF power to accelerate the main beam itself. A vigorous R&...

  8. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne, CH and P. BRUZZONE / CRPP-EPFL, Zürich, CH The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the...

  9. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne and P. BRUZZONE / CRPP-EPFL, Zürich The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the de...

  10. 31 CFR Appendix K to Subpart A of... - Federal Law Enforcement Training Center

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Federal Law Enforcement Training... of Part 1—Federal Law Enforcement Training Center 1. In general. This apppendix applies to the Federal Law Enforcement Training Center. 2. Public reading room. The public reading room for the Federal...

  11. 31 CFR Appendix K to Subpart C of... - Federal Law Enforcement Training Center

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Federal Law Enforcement Training...—Federal Law Enforcement Training Center 1. In general. This appendix applies to the Federal Law... and accounting of disclosures for the Federal Law Enforcement Training Center, will be made by the...

  12. Training and technical assistance to enhance capacity building between prevention research centers and their partners.

    Science.gov (United States)

    Spadaro, Antonia J; Grunbaum, Jo Anne; Dawkins, Nicola U; Wright, Demia S; Rubel, Stephanie K; Green, Diane C; Simoes, Eduardo J

    2011-05-01

    The Centers for Disease Control and Prevention has administered the Prevention Research Centers Program since 1986. We quantified the number and reach of training programs across all centers, determined whether the centers' outcomes varied by characteristics of the academic institution, and explored potential benefits of training and technical assistance for academic researchers and community partners. We characterized how these activities enhanced capacity building within Prevention Research Centers and the community. The program office collected quantitative information on training across all 33 centers via its Internet-based system from April through December 2007. Qualitative data were collected from April through May 2007. We selected 9 centers each for 2 separate, semistructured, telephone interviews, 1 on training and 1 on technical assistance. Across 24 centers, 4,777 people were trained in 99 training programs in fiscal year 2007 (October 1, 2006-September 30, 2007). Nearly 30% of people trained were community members or agency representatives. Training and technical assistance activities provided opportunities to enhance community partners' capacity in areas such as conducting needs assessments and writing grants and to improve the centers' capacity for cultural competency. Both qualitative and quantitative data demonstrated that training and technical assistance activities can foster capacity building and provide a reciprocal venue to support researchers' and the community's research interests. Future evaluation could assess community and public health partners' perception of centers' training programs and technical assistance.

  13. Weapons of Mass Destruction Technology Evaluation and Training Range

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Larry Young

    2009-05-01

    The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testing capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.

  14. The potential of RFID technology in Blood Center processes.

    Science.gov (United States)

    Kebo, V; Klement, P; Cermáková, Z; Gottfried, J; Sommerová, M; Palecek, A

    2010-01-01

    Current RFID technology deployment is limited by safety, procedural and physical limitations in healthcare field. It is important to define and ensure safe operation of technologies without actual deployment in real operation. Potential problems could arise due to the consequences of technical and physical characteristics of RFID technology and its improper location. This article deals with manipulation of blood products and the definition of suitable places for radio identification. Each suitable place must undergo laboratory experiments and tests. The results can provide a convenient base for defining efficient and safe deployment of RFID technology in Blood Centers with substantial financial savings for Czech healthcare.

  15. Sustainable Technology Research and Demonstration Center for Earth Structures

    Directory of Open Access Journals (Sweden)

    Judy Ueda

    2012-10-01

    Full Text Available This is a discussion paper that the authors presented at the International Workshop on Rammed Earth Materials and Sustainable Structures and Hakka Tulou Forum 2011: Structures of Sustainability, 28–31 October 2011, Xiamen University, China. A Sustainable Technology Research and Demonstration Center for Earth Structures is proposed to study, preserve, advance, promote, and implement rammed earth structures. The Center concept including the objectives, scope of activities and benefits of the proposed center are outlined. The Center for Alternative Technology in Wales, UK has been examined as a good base model along with a few successful environmental sustainability initiatives in China. The funding options to establish the proposed center have been discussed. The breadth of activities ultimately depends on funding capability. It is believed that the proposed center development will require significant government support at the initial stage but once corporate sponsorships are in place, the proposed center will potentially become self-supporting. The strategies, for the establishment of the proposed center are also addressed.

  16. Hyperspectral landcover classification for the Yakima Training Center, Yakima, Washington

    Energy Technology Data Exchange (ETDEWEB)

    Steinmaus, K.L.; Perry, E.M.; Petrie, G.M.; Irwin, D.E.; Foote, H.P.; Wurstner, S.K.; Stephen, A.J.

    1998-04-01

    The US Department of Energy`s (DOE`s) Pacific Northwest National Laboratory (PNNL) was tasked in FY97-98 to conduct a multisensor feature extraction project for the Terrain Modeling Project Office (TMPO) of the National Imagery and Mapping Agency (NIMA). The goal of this research is the development of near-autonomous methods to remotely classify and characterize regions of military interest, in support of the TMPO of NIMA. These methods exploit remotely sensed datasets including hyperspectral (HYDICE) imagery, near-infrared and thermal infrared (Daedalus 3600), radar, and terrain datasets. The study site for this project is the US Army`s Yakima Training Center (YTC), a 326,741-acre training area located near Yakima, Washington. Two study areas at the YTC were selected to conduct and demonstrate multisensor feature extraction, the 2-km x 2-km Cantonment Area and the 3-km x 3-km Choke Point area. Classification of the Cantonment area afforded a comparison of classification results at different scales.

  17. Is Continuing Training Useful for Pre-School Teachers? Effects of Training on Pre-School Teachers and Centers

    Science.gov (United States)

    Pineda-Herrero, Pilar; Belvis, Esher; Moreno, M. Victoria; Ucar, Xavier

    2010-01-01

    Continuing training is important for all professionals, and is especially essential for professionals in education. In this article, we present a study that evaluates the state of continuing training in early childhood education in Spain. The research identifies the impact of training for teachers, for children and for educational centers. Results…

  18. Energy Assurance Technical Training and Awareness Program/Energy Infrastructure Training and Analysis Center

    Energy Technology Data Exchange (ETDEWEB)

    Barbara McCabe

    2005-11-15

    This report covers the work completed during Year One (Year One has a 16 month project period) of a five- year Cooperative Agreement (DE-FC26-03NT41895) between the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) and the U. S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). This final technical report is being submitted, as required by the Cooperative Agreement, within 90 (calendar) days after the project period ends (December 31, 2004). The resources allocated to Year One of the Cooperative Agreement were adequate for the completion of the required deliverables. All deliverables have been completed and sent to AAD Document Control as directed in the cooperative agreement. The allocation for Year One required 20-25 trainers to be trained in each of five Train-the-Trainer courses and a total of 6,000 workers trained throughout the country. Through cost savings employed for the scheduling and conduct of Train-the-Trainer, instructor refreshers, and direct training classes, 3171 workers have been trained to date. This total incorporates 159 trainers and members from management, local, county, state and federal organizations identified in the Strategic Plan. The largest percentage of personnel trained is heavy equipment operators, and building engineers, which is the largest targeted population identified under this cooperative agreement. The OENHP, using existing curriculum as appropriate, has modified and developed new training modules that have been used to establish four different levels of training courses. The four courses are: (1) EA 500 Energy Assurance Train-the-Trainer, (2) EA 400 Energy Assurance Instructor Refresher, (3) EA 300 Energy Assurance, and (4) EA 100 Energy Assurance Awareness. Training modules cover topics, such as, but not limited to, facility vulnerability and vulnerability assessment, physical security- heating, ventilation, air conditioning, terrorism awareness, weapons of mass

  19. Why Do Firms Train? Empirical Evidence on the Relationship between Training and Technological and Organizational Change

    Science.gov (United States)

    Neirotti, Paolo; Paolucci, Emilio

    2013-01-01

    We explore the relationship between training and innovation using key insights from the resource-based approach, organizational learning and labour studies. By using data from 304 large enterprises in Italy, the study highlights a twofold role of training in favouring technological and organizational changes. First, training plays a role in…

  20. Why Do Firms Train? Empirical Evidence on the Relationship between Training and Technological and Organizational Change

    Science.gov (United States)

    Neirotti, Paolo; Paolucci, Emilio

    2013-01-01

    We explore the relationship between training and innovation using key insights from the resource-based approach, organizational learning and labour studies. By using data from 304 large enterprises in Italy, the study highlights a twofold role of training in favouring technological and organizational changes. First, training plays a role in…

  1. Cool Technologies for the "Sky Train"

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ The first train from Beijing to Tibet set out on its maiden voyage along the world's highest railway on July 1, 2006. With most of the new 1,110-kilometer track from Golmud in Qinghai to Lhasa at altitudes above 4,000 meters, the train, which is known as the "sky train" by local people, crosses more than 550 kilometers of permafrost, posing a major challenge to the railway's design and construction.

  2. Overview of Stirling Technology Research at NASA Glenn Research Center

    Science.gov (United States)

    Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

    2016-01-01

    Stirling Radioisotope Power Systems (RPSs) are under development to provide power on future space science missions where robotic spacecraft will orbit, fly by, land, or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. NASA Glenn Research Center's newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability and system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

  3. Tree Seed Technology Training Course: Student Outline.

    Science.gov (United States)

    Bonner, F. T.; And Others

    This manual is intended primarily to train seed collectors, seed-plant managers, seed analysts, and nursery managers, but can serve as a resource for any training course in forest regeneration. It includes both temperate and tropical tree species of all intended uses and covers the following topics: seed biology, seed collection, seed handling,…

  4. Soviet Maintenance Training and the Technological Imperative.

    Science.gov (United States)

    1980-06-01

    objectives but the 6 principie of polytechnization of instruction is applicable in both cases. Officer training schools mix hands-on problem solving wi:a...ov, Member of the Military Council and Chief of Political Administration , Moscow Military District, outlined techn’iques for tech- nical training used

  5. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  6. SAVANNAH RIVER TECHNOLOGY CENTER MONTHLY REPORT AUGUST 1992

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, J.M.

    1999-06-21

    'This monthly report summarizes Programs and Accomplishments of the Savannah River Technology Center in support of activities at the Savannah River Site. The following categories are addressed: Reactor, Tritium, Separations, Environmental, Waste Management, General, and Items of Interest.'

  7. Centers for manufacturing technology: Industrial Advisory Committee Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  8. Sino-Swiss center for cassava technology launched in Shanghai

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Under the joint sponsorship of the Shanghai Institutes for Biological Sciences (SIBS) and Swiss Federal Institute of Technology (ETH Zurich), the Shanghai Center for Cassava Biotechnology (SCCB) has been established at the Shanghai Institute of Plant Physiology and Ecology(SIPE), SIBS.

  9. 77 FR 41391 - Final Priority; Rehabilitation Research and Training Center on Vocational Rehabilitation and...

    Science.gov (United States)

    2012-07-13

    ... Network, including Regional Technical Assistance and Continuing Education (TACE) Centers to disseminate... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF EDUCATION Final Priority; Rehabilitation Research and Training Center on Vocational Rehabilitation and...

  10. User-centered design and interactive health technologies for patients.

    Science.gov (United States)

    De Vito Dabbs, Annette; Myers, Brad A; Mc Curry, Kenneth R; Dunbar-Jacob, Jacqueline; Hawkins, Robert P; Begey, Alex; Dew, Mary Amanda

    2009-01-01

    Despite recommendations that patients be involved in the design and testing of health technologies, few reports describe how to involve patients in systematic and meaningful ways to ensure that applications are customized to meet their needs. User-centered design is an approach that involves end users throughout the development process so that technologies support tasks, are easy to operate, and are of value to users. In this article, we provide an overview of user-centered design and use the development of Pocket Personal Assistant for Tracking Health (Pocket PATH) to illustrate how these principles and techniques were applied to involve patients in the development of this interactive health technology. Involving patient-users in the design and testing ensured functionality and usability, therefore increasing the likelihood of promoting the intended health outcomes.

  11. Science and Technology Investment Strategy for Squadron Level Training

    Science.gov (United States)

    1993-05-01

    34 Maintainers felt that some of the globally imposed training requirements, such as block training, were entirely inappropriate or overtrained . They also...system risk. He must answer the question of 442 whether or not the new technology could cause loss of life, personnel injury , mission failure, or

  12. Roles of Modern Information Technology in Graduate Training

    Science.gov (United States)

    Li, Ruixian; Gao, Song

    2009-01-01

    Introduction of information technology into the education field has greatly enriched teaching content and forms, and facilitated transformation of teaching mode, teaching approaches and training concepts. Especially for training of graduates, its introduction seems extraordinarily prominent. In this paper, the authors will analyze and discuss…

  13. Learning Technology Specification: Principles for Army Training Designers and Developers

    Science.gov (United States)

    2013-09-01

    training: capitalizing on lessons learned. International Journal of Training and Development 14, 239-249. Bloom , B. S . (1984). Taxonomy of... educational objectives . Boston: Allyn and Bacon. Bower, M. (2008). Affordance analysis- matching learning tasks with learning technologies... Educational Media International, 45, 3-15. Bransford, J. D., Sherwood, R. D., Hasselbring, T. S ., Kinzer, C. K., and Williams, S . M. (1990). Anchored

  14. Forecasting the impact of virtual environment technology on maintenance training

    Science.gov (United States)

    Schlager, Mark S.; Boman, Duane; Piantanida, Tom; Stephenson, Robert

    1993-01-01

    To assist NASA and the Air Force in determining how and when to invest in virtual environment (VE) technology for maintenance training, we identified possible roles for VE technology in such training, assessed its cost-effectiveness relative to existing technologies, and formulated recommendations for a research agenda that would address instructional and system development issues involved in fielding a VE training system. In the first phase of the study, we surveyed VE developers to forecast capabilities, maturity, and estimated costs for VE component technologies. We then identified maintenance tasks and their training costs through interviews with maintenance technicians, instructors, and training developers. Ten candidate tasks were selected from two classes of maintenance tasks (seven aircraft maintenance and three space maintenance) using five criteria developed to identify types of tasks most likely to benefit from VE training. Three tasks were used as specific cases for cost-benefit analysis. In formulating research recommendations, we considered three aspects of feasibility: technological considerations, cost-effectiveness, and anticipated R&D efforts. In this paper, we describe the major findings in each of these areas and suggest research efforts that we believe will help achieve the goal of a cost-effective VE maintenance training system by the next decade.

  15. Fast Training of Support Vector Machines Using Error-Center-Based Optimization

    Institute of Scientific and Technical Information of China (English)

    L. Meng; Q. H. Wu

    2005-01-01

    This paper presents a new algorithm for Support Vector Machine (SVM) training, which trains a machine based on the cluster centers of errors caused by the current machine. Experiments withvarious training sets show that the computation time of this new algorithm scales almost linear with training set size and thus may be applied to much larger training sets, in comparison to standard quadratic programming (QP) techniques.

  16. Relative risk site evaluations for Yakima Training Center

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R.M.; Whelan, G.

    1996-11-01

    All 20 U.S. Army Yakima Training Center (YTC) sites evaluated were given a `low` relative risk. At Solid Waste Management Unit (SWMU) 22, a `minimum` soils contaminant hazard factor was assigned even though 6,700 mg/kg TPH-diesel was found in surface soil. SWMU 22 is physically located on top of and with the fence surrounding Area of Concern (AOC) 4. Because the diesel is most likely associated with AOC 4, and plans are to clean up AOC 4, any further actions regarding these contaminated soils should be addressed as part of the planned actions for AOC 4. Contaminant hazard factors of `moderate` were assigned to the soil pathway for SWMUs 4 and 7 because dieldrin and arsenic, respectively, were found in surface soil samples at concentrations exceeding standards. A `moderate` contaminant hazard factor was also assigned to the sediment pathway for AOC 1 because arsenic detected in sediments in `Larry`s Swimming Pool` exceeded the standard. All other contaminant hazard factors were rated as minimal. The receptor factor for all sites and pathways was rated `limited,` except for SWMU 54 in which the groundwater receptor factor was rated `potential.` A `potential` rating was assigned to the groundwater pathway at this site to be conservative. The site is located on the south side of the syncline axis where the unconfined aquifer may be present and there are no monitoring wells at the site to confirm or deny the presence of groundwater contamination.

  17. 76 FR 11498 - Submission for OMB Review; Comment Request; Generic Submission of Technology Transfer Center (TTC...

    Science.gov (United States)

    2011-03-02

    ... Submission of Technology Transfer Center (TTC) External Customer Satisfaction Surveys (NCI) SUMMARY: Under... control number. Proposed Collection: Title: Generic Submission of Technology Transfer Center (TTC... collaborations and alliances with the NIH. The needs of external technology transfer customers and stakeholders...

  18. Incorporating a Training Construct into the Unified Theory of Technology Acceptance and Use of Technology

    Science.gov (United States)

    Harris, Matthew E.

    2016-01-01

    The purpose of this study was to identify and examine existing technology acceptance constructs as they relate to end-user participation in training programs. By analyzing technology acceptance constructs and their fit with existing training paradigms, it was expected that there would be a significant increase in use behavior as defined in the…

  19. Functional information technology in geometry-graphic training of engineers

    Directory of Open Access Journals (Sweden)

    Irina D. Stolbova

    2017-01-01

    Full Text Available In the last decade, information technology fundamentally changed the design activity and made significant adjustments to the development of design documentation. Electronic drawings and 3d-models appeared instead of paper drawings and the traditional form of the design documentation. Geometric modeling of 3d-technology has replaced the graphic design technology. Standards on the electronic models are introduced. Electronic prototypes and 3d-printing contribute to the spread of rapid prototyping technologies.In these conditions, the task to find the new learning technology, corresponding to the level of development of information technologies and meeting the requirements of modern design and manufacturing technologies, comes to the fore. The purpose of this paper — the analysis of the information technology capabilities in the formation of geometrical-graphic competences, happening in the base of graphic training of students of technical university. Traditionally, basic graphic training of students in the junior university courses consisted in consecutive studying of the descriptive geometry, engineering and computer graphics. Today, the use of integrative approach is relevant, but the role of computer graphics varies considerably. It is not only an object of study, but also a learning tool, the core base of graphic training of students. Computer graphics is an efficient mechanism for the development of students’ spatial thinking. The role of instrumental training of students to the wide use of CAD-systems increases in the solution of educational problems and in the implementation of project tasks, which corresponds to the modern requirements of the professional work of the designer-constructor.In this paper, the following methods are used: system analysis, synthesis, simulation.General geometric-graphic training model of students of innovation orientation, based on the use of a wide range of computer technology is developed. The

  20. Employment, Trends, and Training in Information Technology

    Science.gov (United States)

    Wright, Benjamin

    2009-01-01

    In recent years, students, workers, and jobseekers have received mixed signals about the job market for information technology. Periods of strong job growth have been punctuated by brief periods of employment declines. Optimism about information technology (commonly referred to as IT) as a career field has been tempered by concerns about job…

  1. SciDAC visualization and analytics center for enabling technology

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E Wes [Computing Sciences Division, Lawrence Berkeley National Laboratory, The University of California, Berkeley, CA 94720-8139 (United States); Johnson, Chris [Scientific Computing and Imaging Institute, University of Utah, 72 S. Central Campus Drive, Salt Lake City, UT 84112 (United States); Joy, Ken [Institute for Data Analysis and Visualization, University of California, One Shields Avenue, Davis, CA 95616-8562 (United States); Ahern, Sean [National Center for Computational Sciences, Oak Ridge National Laboratory, One Bethel Valley Road, PO Box 2008 MS-6016, Oak Ridge, TN 37831 (United States); Pascucci, Valerio [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Childs, Hank [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Cohen, Jonathan; Duchaineau, Mark [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Hamann, Bernd [Institute for Data Analysis and Visualization, University of California, One Shields Avenue, Davis, CA 95616-8562 (United States); Hansen, Charles; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier [Scientific Computing and Imaging Institute, University of Utah, 72 S. Central Campus Drive, Salt Lake City, UT 84112 (United States); Laney, Dan [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Lindstrom, Peter [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Meredith, Jeremy; Ostrouchov, George [National Center for Computational Sciences, Oak Ridge National Laboratory, One Bethel Valley Road, PO Box 2008 MS-6016, Oak Ridge, TN 37831 (United States)

    2007-07-15

    The Visualization and Analytics Center for Enabling Technologies (VACET) focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang,' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision of VACET is to adapt, extend, create when necessary, and deploy visual data analysis solutions that are responsive to the needs of DOE's computational and experimental scientists. Our center is engineered to be directly responsive to those needs and to deliver solutions for use in DOE's large open computing facilities. The research and development directly target data understanding problems provided by our scientific application stakeholders. VACET draws from a diverse set of visualization technology ranging from production quality applications and application frameworks to state-of-the-art algorithms for visualization, analysis, analytics, data manipulation, and data management.

  2. TRAINING OLDER WORKERS FOR TECHNOLOGY-BASED EMPLOYMENT

    Science.gov (United States)

    Lee, Chin Chin; Czaja, Sara J.; Sharit, Joseph

    2009-01-01

    An increasingly aging workforce and advances in technology are changing work environments and structures. The continued employability of older adults, particularly those of lower socioeconomic status (SES), requires them to participate in training programs to ensure their competence in today’s workplace. Focus groups with 37 unemployed adults (51–76 years old) were conducted to gather information about barriers and obstacles for returning to work, training needs and formats, work experiences, and perceptions of the characteristics of an ideal job. Overall, results indicated that participants experienced age discrimination and lack of technology skills. They also expressed a desire to receive additional training on technology and a preference for classroom training. PMID:20351795

  3. Electromechanical Componentry. High-Technology Training Module.

    Science.gov (United States)

    Lindemann, Don

    This training module on electromechanical components contains 10 units for a two-year vocational program packaging system equipment control course at Wisconsin Indianhead Technical College. This module describes the functions of electromechanical devices essential for understanding input/output devices for Programmable Logic Control (PLC)…

  4. Center for Renewable Energy and Alternative Transportation Technologies (CREATT)

    Energy Technology Data Exchange (ETDEWEB)

    Mackin, Thomas

    2012-06-30

    The Center for Renewable Energy and Alternative Transportation Technologies (CREATT) was established to advance the state of the art in knowledge and education on critical technologies that support a renewable energy future. Our research and education efforts have focused on alternative energy systems, energy storage systems, and research on battery and hybrid energy storage systems.This report details the Center's progress in the following specific areas: Development of a battery laboratory; Development of a demonstration system for compressed air energy storage; Development of electric propulsion test systems; Battery storage systems; Thermal management of battery packs; and Construction of a micro-grid to support real-world performance monitoring of a renewable energy system.

  5. Training Future Leaders of Academic Medicine: Internal Programs at Three Academic Health Centers.

    Science.gov (United States)

    Morahan, Page S.; Kasperbauer, Dwight; McDade, Sharon A.; Aschenbrener, Carol A.; Triolo, Pamela K.; Monteleone, Patricia L.; Counte, Michael; Meyer, Michael J.

    1998-01-01

    Reviews need for internal leadership training programs at academic health centers and describes three programs. Elements common to the programs include small classes, participants from many areas of academic medicine and health care, building on prior experience and training, training conducted away from the institution, short sessions, faculty…

  6. Evaluating Training and Implementation of the Individualized Meaning-Centered Approach to Teaching Braille Literacy

    Science.gov (United States)

    Durando, Julie A.; Wormsley, Diane P.

    2009-01-01

    This study investigated the effectiveness of training workshops in braille literacy for teachers of students who are visually impaired and have additional disabilities. Participants in the training workshops in the Individualized Meaning-Centered Approach indicated general satisfaction with the training. Most reported using the approach with…

  7. Graduate Teaching Assistant Training That Fosters Student-Centered Instruction and Professional Development

    Science.gov (United States)

    Pentecost, Thomas C.; Langdon, Laurie S.; Asirvatham, Margaret; Robus, Hannah; Parson, Robert

    2012-01-01

    A new graduate teaching assistant (TA) training program has been developed to support curricular reforms in our large enrollment general chemistry courses. The focus of this training has been to support the TAs in the implementation of student-centered recitation sessions and support the professional development of the TAs. The training includes…

  8. Training in virtual reality: a comparison of technology types

    Energy Technology Data Exchange (ETDEWEB)

    Sebok, Angelia; Nystad, Espen

    2004-11-15

    For maintenance work in the nuclear industry, a primary goal is reducing radiation exposure. Workers need to be trained to perform their tasks quickly and efficiently to minimize their time in the radioactive area, thus limiting their exposure. This requires that workers become familiar with the area in which they will work, the radiation distribution, and the tasks they will perform. Virtual Reality technology can provide this training in a safe environment. VR systems are available in a variety of formats, ranging from desktop VR to fully immersive head-mounted displays. One question regarding the use of VR for training is 'Which technology type best supports training?' This report describes an experiment evaluating different VR display technology types in terms of their ability to support different types of learning. The VR systems include two desktop types (monoscopic and stereoscopic view), a large screen display, and a head-mounted display. Procedural, configuration, and assembly training types were evaluated. Learning was assessed in terms of objective task performance and radiation awareness. Retention and transfer of training were evaluated for procedural learning. In addition, subjective questionnaire data were also gathered. Findings were that technology type did not matter for procedural, configuration, or assembly knowledge. Objective performance, by the end of the training session, was equivalent across display technology types in all of these learning conditions. On the other hand, retention and transfer of training appeared to be better supported by stereoscopic displays, particularly the large screen stereoscopic display. Subjects rated perceived performance and simulator sickness highest in the head-mounted display condition. Sense of presence (SOP) was best in the large screen stereoscopic condition for procedural learning, but there were no differences for SOP in assembly learning. This study suggests that sense of presence and

  9. Training the public health workforce from Albany to Zambia: technology lessons learned along the way.

    Science.gov (United States)

    Waltz, Edward C; Maniccia, Dayna M; Bryde, Regina L; Murphy, Kristin; Harris, Brett R; Waldenmaier, Mark N

    2010-01-01

    This article describes lessons learned by the University at Albany Center for Public Health Preparedness (UA-CPHP) in using three technologies to deliver preparedness training for public health professionals in New York State. These three technologies are: 1. Audience response system (ARS, or the "clicker" system)--Purchased to improve engagement of all participants in heterogeneous training audiences, it also markedly reduces staff time while improving training evaluation (cost: $4,500). 2. Satellite broadcast programs--UA-CPHP produced more than 50 broadcasts, which remain available as videostreams and/or podcasts. Viewership of archived programs sometimes surpasses that of the live event (cost estimate: $23,000 to $39,000). 3. Interactive online courses--Seventeen courses have registered more than 44,000 learners worldwide. The Pandemic Influenza course alone has reached more than 16,000 registrants from all 50 U.S. states and at least 56 other countries (cost estimate: $30,000 to $65,000). UA-CPHP's experience as a preparedness training center has confirmed that contemporary technology can be employed to improve and increase the reach of these training efforts. An additional finding was that, quite unintentionally, the intensive use of distance-based educational modalities designed to reach public health practitioners in New York State has afforded UA-CPHP a substantial national and international audience as well, and at no additional cost.

  10. BioServe space technologies: A NASA Center for the Commercial Development of Space

    Science.gov (United States)

    1992-01-01

    BioServe Space Technologies, a NASA Center for the Commercial Development of Space (CCDS), was established in 1987. As is characteristic of each CCDS designated by NASA, the goals of this commercial center are aimed at stimulating high technology research that takes advantage of the space environment and at leading in the development of new products and services which have commercial potential or that contribute to possible new commercial ventures. BioServe's efforts in these areas focus upon space life science studies and the development of enabling devices that will facilitate ground-based experiments as well as the conversion of such to the microgravity environment. A direct result of BioServe's hardware development and life sciences studies is the training of the next generation of bioengineers who will be knowledgeable and comfortable working with the challenges of the space frontier.

  11. Establishment of the Center for Biomedical Technology Innovation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-12-15

    The report discussed the following topics: (1) Orthopedic Devices; (2) Hybrid Vector and Method Resulting in Protein Overproduction by Eukaryotic Cells; (3) Surgical Simulator; (4) CBTI (Center for Biomedical Technology Innovation) as an Incubator for Start-up Companies; (5) Voice-activated, computer-assisted surgical robotics; (6) Through transmission ultrasonic 3-D holography for diagnostic imaging; (7) CBTI's Scibermed{trademark} Virtual Institute (SVI); and (8) Laser Oxygenation Tomography.

  12. Career and Technology Center Honors Julie Hartman | Poster

    Science.gov (United States)

    By Carolynne Keenan, Contributing Writer On May 7, Julie Hartman was honored by the Frederick County Career and Technology Center (CTC) for her support of the CTC’s Biomedical Sciences Program. As an education program specialist for Outreach and Special Programs at NCI at Frederick, Hartman is responsible for NCI at Frederick’s participation in the program, which is designed to offer Frederick County high school students hands-on, practical laboratory experience beyond the typical classroom setting. 

  13. ESTABLISHMENT OF THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2003-07-01

    Technical Progress Report describes progress made on the eight sub-projects awarded in the first year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of activity only.

  14. Establishment of the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Final Technical Report covers the eight sub-projects awarded in the first year and the five projects awarded in the second year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  15. Center for BioBased Binders and Pollution Reduction Technology

    Energy Technology Data Exchange (ETDEWEB)

    Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)

    2013-07-01

    Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.

  16. Use of Virtual Environment Training Technology for Individual Combat Simulation

    Science.gov (United States)

    1993-02-01

    the same training environments as Level 3 display technology (except 31 that use of a HMD does not necessarily require the use of Level 3 haptic sensing...through limits on the allowable movement speed Finally, Level 3 technology improves upon (or augments ) Level 2 through: High-resolution HMD Measurement...of eye position if required by the high-resolution HMD Advanced speech recognition technology Programmable general-purpose haptic interfaces (e.g

  17. Training for New Technologies in Singapore. Training Discussion Paper No. 96.

    Science.gov (United States)

    Oliveira, Joao; Pillay, Gerald F.

    Recent educational reforms in Singapore have essentially been motivated by economic and industrial concerns. Six specific training policies and practices are being implemented to respond to the perceived requirements of new work technologies: (1) development of an increasingly flexible training system, including introduction of a dual system; (2)…

  18. Development and Implementation of the Midwest Geological Sequestration Consortium CO2-Technology Transfer Center

    Energy Technology Data Exchange (ETDEWEB)

    Greenberg, Sallie E. [Univ. of Illinois, Champaign, IL (United States)

    2015-06-30

    In 2009, the Illinois State Geological Survey (ISGS), in collaboration with the Midwest Geological Sequestration Consortium (MGSC), created a regional technology training center to disseminate carbon capture and sequestration (CCS) technology gained through leadership and participation in regional carbon sequestration projects. This technology training center was titled and branded as the Sequestration Training and Education Program (STEP). Over the last six years STEP has provided local, regional, national, and international education and training opportunities for engineers, geologists, service providers, regulators, executives, K-12 students, K-12 educators, undergraduate students, graduate students, university and community college faculty members, and participants of community programs and functions, community organizations, and others. The goal for STEP educational programs has been on knowledge sharing and capacity building to stimulate economic recovery and development by training personnel for commercial CCS projects. STEP has worked with local, national and international professional organizations and regional experts to leverage existing training opportunities and provide stand-alone training. This report gives detailed information on STEP activities during the grant period (2009-2015).

  19. NEEMO 21: Tools, Techniques, Technologies and Training for Science Exploration

    Science.gov (United States)

    Graff, T.; Young, K.; Coan, D.; Merselis, D.; Bellantuono, A.; Dougan, K.; Rodriguez-Lanetty, M.; Nedimyer, K.; Chappell, S.; Beaton, K.; Naids, A.; Hood, A.; Reagan, M.; Rampe, E.; Todd, W.; Poffenberger, J.; Garrison, D.

    2017-01-01

    The 21st mission of the National Aeronautics and Space Administration (NASA) Extreme Environment Mission Operations (NEEMO) was a highly integrated operational field test and evaluation of tools, techniques, technologies, and training for science driven exploration during extravehicular activity (EVA). The mission was conducted in July 2016 from the Aquarius habitat, an underwater laboratory, off the coast of Key Largo in the Florida Keys National Marine Sanctuary. An international crew of eight (comprised of NASA and ESA astronauts, engineers, medical personnel, and habitat technicians) lived and worked in and around Aquarius and its surrounding reef environment for 16 days. The integrated testing (both interior and exterior objectives) conducted from this unique facility continues to support current and future human space exploration endeavors. Expanding on the scientific and operational evaluations conducted during NEEMO 20, the 21st NEEMO mission further incorporated a diverse Science Team comprised of planetary geoscientists from the Astromaterials Research and Exploration Science (ARES/XI) Division from the Johnson Space Center, marine scientists from the Department of Biological Sciences at Florida International University (FIU) Integrative Marine Genomics and Symbiosis (IMaGeS) Lab, and conservationists from the Coral Restoration Foundation. The Science Team worked in close coordination with the long-standing EVA operations, planning, engineering, and research components of NEEMO in all aspects of mission planning, development, and execution.

  20. Armstrong Flight Research Center Research Technology and Engineering Report 2015

    Science.gov (United States)

    Voracek, David F.

    2016-01-01

    I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

  1. Publications in academic medical centers: technology-facilitated culture clash.

    Science.gov (United States)

    Berner, Eta S

    2014-05-01

    Academic culture has a set of norms, expectations, and values that are sometimes tacit and sometimes very explicit. In medical school and other health professions educational settings, probably the most common norm includes placing a high value on peer-reviewed research publications, which are seen as the major evidence of scholarly productivity. Other features of academic culture include encouraging junior faculty and graduate students to share their research results at professional conferences and lecturing with slides as a major way to convey information. Major values that faculty share with journal editors include responsible conduct of research and proper attribution of others' words and ideas. Medical school faculty also value technology and are often quick to embrace technological advances that can assist them in their teaching and research. This article addresses the effects of technology on three aspects of academic culture: education, presentations at professional meetings, and research publications.The technologies discussed include online instruction, dissemination of conference proceedings on the Internet, plagiarism-detection software, and new technologies deployed by the National Center for Biotechnology Information, the home of PubMed. The author describes how the ease of deploying new technologies without faculty changing their norms and behavior in the areas of teaching and research can lead to conflicts of values among key stakeholders in the academic medical community, including faculty, journal editors, and professional associations. The implications of these conflicts and strategies for managing them are discussed.

  2. Center for Energy Research and Training (CERT) infrastructure support under USDOE/MEIAP. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Mallik, A.K.; Rojeski, P. Jr.

    1993-10-01

    As one of the several institutions of higher education, North Carolina Agricultural and Technical State University at Greensboro has received support from the office of Minority Education Institution Assistance Program (MEIAP) of the US Department of Energy primarily to provide infrastructure support to promote and enhance interdisciplinary energy-related research. In this effort, the university was authorized to prepare a plan to create a Center for Energy Research and Training (CERT), which was initiated on September 30, 1987. The goals and objectives for CERT are as specified below: (1) To encourage research by the faculty in many academic disciplines and to enhance their success in finding and obtaining funds for interdisciplinary and multi-school research. (2) To enhance students` energy education with increased opportunities for: theoretical and practical contact with energy issues and technologies; new courses and improved course content; internships and graduate funding; and ability and desire to pursue careers in energy field. (3) To establish training and service programs for off-campus constituents in energy issues, use, and management. (4) To develop cooperative relationships with industry, businesses, universities, and other private and professional organizations and with the State Energy Office. (5) To cooperate in establishing communications and collaborative research projects with various national research laboratories and other federal agencies. (6) To develop a permanent university infrastructure for energy research, training, and community service. Summaries of activities from September, 1992 to September, 1993 are presented.

  3. Robotic Technology Efforts at the NASA/Johnson Space Center

    Science.gov (United States)

    Diftler, Ron

    2017-01-01

    The NASA/Johnson Space Center has been developing robotic systems in support of space exploration for more than two decades. The goal of the Center's Robotic Systems Technology Branch is to design and build hardware and software to assist astronauts in performing their mission. These systems include: rovers, humanoid robots, inspection devices and wearable robotics. Inspection systems provide external views of space vehicles to search for surface damage and also maneuver inside restricted areas to verify proper connections. New concepts in human and robotic rovers offer solutions for navigating difficult terrain expected in future planetary missions. An important objective for humanoid robots is to relieve the crew of "dull, dirty or dangerous" tasks allowing them more time to perform their important science and exploration missions. Wearable robotics one of the Center's newest development areas can provide crew with low mass exercise capability and also augment an astronaut's strength while wearing a space suit. This presentation will describe the robotic technology and prototypes developed at the Johnson Space Center that are the basis for future flight systems. An overview of inspection robots will show their operation on the ground and in-orbit. Rovers with independent wheel modules, crab steering, and active suspension are able to climb over large obstacles, and nimbly maneuver around others. Humanoid robots, including the First Humanoid Robot in Space: Robonaut 2, demonstrate capabilities that will lead to robotic caretakers for human habitats in space, and on Mars. The Center's Wearable Robotics Lab supports work in assistive and sensing devices, including exoskeletons, force measuring shoes, and grasp assist gloves.

  4. Training Technology Handbook Development. Phase I. Annotated Literature Review.

    Science.gov (United States)

    1981-08-01

    technology handbook that will assist systems acquisition and training managers in forecasting training system course requirements. " -’ The contracting...DTIC TAB ] " Unannounced " Just if icatiorl. D stribultion/ ’ OSTI\\Iv1ai~t ce Dist Spoc l iiiV...iteration in this process is due to the large interactions between methods/media specification, instructional block and course allocation, and system

  5. Training Needs and Methods of Training in Information Technology for Nigerian Special Library Services.

    Science.gov (United States)

    Nweke, Ken M. C.

    1992-01-01

    Reports on a survey of heads of special libraries in Nigeria that revealed a need for training in and access to information technology in library schools and special libraries. Greater funding for technology, participation in international networks and professional associations, and utilization of international fellowships for further study are…

  6. Development of auxiliary shutdown panel for nuclear training center 2 simulator

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Cheul Un; Lee, Yong Kwan; Cho, Byung Hak; Park, Shin Yeol; Choi, Yong Jae; Kim, Yong Ran [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center; Kim, Sung Il; Lee, Sung Cheul; Ryuh, Kyung Shin [Korea Electric Power Corp. (KEPCO), Seoul (Korea, Republic of)

    1995-12-31

    The major object of the project is to provide emergency operating conditions to the trainees by adding simulated ASP to the existing NTC(Nuclear Training Center) 2 simulator. The other object of the project is to make KEPRI(Korea Electric Power Research Institute) be equipped with a technical know-how that is inevitable to apply its state-of-art technologies to the existing simulators in KEPCO. The contents of this report are as follows : 1. Design and manufacturing of prototype ASP. 2. Manufacturing and installation of full scope ASP. 3. Development and modification of simulator programs. 4. Integration of hardware and software, perform performance acceptance test (author). 22 refs., 9 figs.

  7. NASA Johnson Space Center SBIR STTR Program Technology Innovations

    Science.gov (United States)

    Krishen, Kumar

    2007-01-01

    The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

  8. Wearable Training-Monitoring Technology: Applications, Challenges, and Opportunities.

    Science.gov (United States)

    Cardinale, Marco; Varley, Matthew C

    2017-04-01

    The need to quantify aspects of training to improve training prescription has been the holy grail of sport scientists and coaches for many years. Recently, there has been an increase in scientific interest, possibly due to technological advancements and better equipment to quantify training activities. Over the last few years there has been an increase in the number of studies assessing training load in various athletic cohorts with a bias toward subjective reports and/or quantifications of external load. There is an evident lack of extensive longitudinal studies employing objective internal-load measurements, possibly due to the cost-effectiveness and invasiveness of measures necessary to quantify objective internal loads. Advances in technology might help in developing better wearable tools able to ease the difficulties and costs associated with conducting longitudinal observational studies in athletic cohorts and possibly provide better information on the biological implications of specific external-load patterns. Considering the recent technological developments for monitoring training load and the extensive use of various tools for research and applied work, the aim of this work was to review applications, challenges, and opportunities of various wearable technologies.

  9. The effect of offering distance education on enrollment in onsite training at the National Conservation Training Center

    Science.gov (United States)

    Ratz, Joan M.; Schuster, Rudy M.; Marcy, Ann H.

    2011-01-01

    The objective of this study was to explore the effect that providing distance education courses would have on enrollment in courses offered on the campus of the National Conservation Training Center. This is an exploratory study and the results should be interpreted as preliminary rather than conclusive. The study included two components: analysis of existing training-enrollment data for the time period from October 1, 2007 to June 24, 2009, and a survey of U.S. Fish and Wildlife Service (Service) employees regarding their preferences for onsite training and distance education. The analysis of training-enrollment data included training records for 2,823 Service employees. Using this dataset, we created a database that included region, supervisory status, number of enrollments in online training, instructor-led web-based classes, correspondence courses, courses at the campus of the National Conservation Training Center, and instructor-led courses off campus. Our analyses focused on differences between enrollment in distance education and onsite courses and the effects of regional affiliation, supervisory status, and course format. Generally, the regions closest to the campus had higher enrollment in onsite training and regions farther away had higher enrollment in distance education. Nonsupervisors were more likely to enroll in training on campus and supervisors were more likely to enroll in instructor-led training off site. Enrollment in instructor-led courses was higher than in self-paced courses, although this may result from fewer offerings of self-paced courses. The second component of the study involved a survey of Service employees regarding their preferences for distance education and onsite training. The survey was administered online and 911 Service employees responded. Overall, survey respondents indicated a small preference for onsite training and were more likely to enroll in onsite courses than distance education. When asked to indicate reasons that

  10. Native American Training Program in Petroleum Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Winifred M.; Kokesh, Judith H.

    1999-04-27

    This report outlines a comprehensive training program for members of Native American tribes whose lands have oil and gas resources. The program has two components: short courses and internships. Programs are proposed for: (1) adult tribes representatives who are responsible for managing tribal mineral holdings, setting policy, or who work in the oil and gas industry; (2) graduate and undergraduate college students who are tribal members and are studying in the appropriate fields; and (3) high school and middle school teachers, science teachers. Materials and program models already have been developed for some components of the projects. The plan is a coordinated, comprehensive effort to use existing resources to accomplish its goals. Partnerships will be established with the tribes, the BIA, tribal organizations, other government agencies, and the private sector to implement the program.

  11. Alternative treatment technology information center computer database system

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, D. [Environmental Protection Agency, Edison, NJ (United States)

    1995-10-01

    The Alternative Treatment Technology Information Center (ATTIC) computer database system was developed pursuant to the 1986 Superfund law amendments. It provides up-to-date information on innovative treatment technologies to clean up hazardous waste sites. ATTIC v2.0 provides access to several independent databases as well as a mechanism for retrieving full-text documents of key literature. It can be accessed with a personal computer and modem 24 hours a day, and there are no user fees. ATTIC provides {open_quotes}one-stop shopping{close_quotes} for information on alternative treatment options by accessing several databases: (1) treatment technology database; this contains abstracts from the literature on all types of treatment technologies, including biological, chemical, physical, and thermal methods. The best literature as viewed by experts is highlighted. (2) treatability study database; this provides performance information on technologies to remove contaminants from wastewaters and soils. It is derived from treatability studies. This database is available through ATTIC or separately as a disk that can be mailed to you. (3) underground storage tank database; this presents information on underground storage tank corrective actions, surface spills, emergency response, and remedial actions. (4) oil/chemical spill database; this provides abstracts on treatment and disposal of spilled oil and chemicals. In addition to these separate databases, ATTIC allows immediate access to other disk-based systems such as the Vendor Information System for Innovative Treatment Technologies (VISITT) and the Bioremediation in the Field Search System (BFSS). The user may download these programs to their own PC via a high-speed modem. Also via modem, users are able to download entire documents through the ATTIC system. Currently, about fifty publications are available, including Superfund Innovative Technology Evaluation (SITE) program documents.

  12. Final Technical Report. Training in Building Audit Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Brosemer, Kathleen [Sault Sainte Marie Tribe of Chippewa Indians, Marie, MI (United States)

    2015-03-27

    In 2011, the Tribe proposed and was awarded the Training in Building Audit Technologies grant from the DOE in the amount of $55,748 to contract for training programs for infrared cameras, blower door technology applications and building systems. The coursework consisted of; Infrared Camera Training: Level I - Thermal Imaging for Energy Audits; Blower Door Analysis and Building-As-A-System Training, Building Performance Institute (BPI) Building Analyst; Building Envelope Training, Building Performance Institute (BPI) Envelope Professional; and Audit/JobFLEX Tablet Software. Competitive procurement of the training contractor resulted in lower costs, allowing the Tribe to request and receive DOE approval to additionally purchase energy audit equipment and contract for residential energy audits of 25 low-income Tribal Housing units. Sault Tribe personnel received field training to supplement the classroom instruction on proper use of the energy audit equipment. Field experience was provided through the second DOE energy audits grant, allowing Sault Tribe personnel to join the contractor, Building Science Academy, in conducting 25 residential energy audits of low-income Tribal Housing units.

  13. Procedural training in virtual reality: A comparison of technology types

    Energy Technology Data Exchange (ETDEWEB)

    Sebok, A.; Nystad, E. [Alion Science and Technology, MA and D Operation, 4949 Pearl East Circle, Boulder, CO 80301 OECD Halden Reactor Project, PO Box 173, N-1751 Halden (Norway)

    2006-07-01

    This paper describes a study investigating questions of learning effectiveness in different VR technology types. Four VR display technology types were compared in terms of their ability to support procedural learning. The VR systems included two desktop displays (mono-scopic and stereoscopic view), a large screen stereoscopic display, and a mono-scopic head-mounted display. Twenty-four participants completed procedural training scenarios on these different display types. Training effectiveness was assessed in terms of objective task performance. Following the training session, participants performed the procedure they had just learned using the same VR display type they used for training. Time to complete the procedure and errors were recorded. Retention and transfer of training were evaluated in a talk-through session 24 hours after the training. In addition, subjective questionnaire data were gathered to investigate perceived workload, Sense of Presence, simulator sickness, perceived usability, and ease of navigation. While no difference was found for the short-term learning, the study results indicate that retention and transfer of training were better supported by the large screen stereoscopic condition. (authors)

  14. Training Senior Citizen Centers Staff in Blind Rehabilitation Techniques.

    Science.gov (United States)

    Asch, Celine

    1980-01-01

    The author discusses a project conducted in 1979 in which personnel from Arkansas Enterprises for the Blind trained staff members from community based programs for the elderly in techniques designed to involve and assist visually impaired senior citizens. (Author)

  15. The 1991 research and technology report, Goddard Space Flight Center

    Science.gov (United States)

    Soffen, Gerald (Editor); Ottenstein, Howard (Editor); Montgomery, Harry (Editor); Truszkowski, Walter (Editor); Frost, Kenneth (Editor); Sullivan, Walter (Editor); Boyle, Charles (Editor)

    1991-01-01

    The 1991 Research and Technology Report for Goddard Space Flight Center is presented. Research covered areas such as (1) earth sciences including upper atmosphere, lower atmosphere, oceans, hydrology, and global studies; (2) space sciences including solar studies, planetary studies, Astro-1, gamma ray investigations, and astrophysics; (3) flight projects; (4) engineering including robotics, mechanical engineering, electronics, imaging and optics, thermal and cryogenic studies, and balloons; and (5) ground systems, networks, and communications including data and networks, TDRSS, mission planning and scheduling, and software development and test.

  16. ACADEMIC TRAINING: Physics Technologies in Medicine

    CERN Multimedia

    Françoise Benz

    2002-01-01

    10, 11, 12, 13, 14 June LECTURE SERIES from 11.00 to 12.00 hrs - Auditorium, bldg. 500 Physics Technologies in Medicine by G. K. Von Schulthess / Univ. of Zürich, S. Wildermuth, A. Buck / Univ. Hospital Zürich, K. Jäger / Univ. Hospital Basel, R. Kreis / Univ. Hospital Bern Modern medicine is a large consumer of physics technologies. The series of lectures covers medical imaging starting with an overview and the history of medical imaging. Then follows four lectures covering x-ray imaging positron emission tomography imaging blood flow by ultrasound magnetic resonance Monday 10 June 100 Years of Medical Imaging Pr. Gustav K. von Schulthess MD, PhD / University of Zurich History and overview of Medical Imaging Tuesday 11 June X-rays: still going strong Dr. Simon Wildermuth / MD, University Hospital Zurich Multidetector computed tomography: New developments and applications Wednesday 12 June Nuclear Medicine: PET Positron Emission Tomography Dr. Alfred Buck / MD, MSc, University...

  17. ACADEMIC TRAINING: Physics Technologies in Medecine

    CERN Multimedia

    Françoise Benz

    2002-01-01

    10, 11, 12, 13, 14 June LECTURE SERIES from 11.00 to 12.00 hrs - Auditorium, bldg. 500 Physics Technologies in Medecine by G. K. Von Schulthess / Univ. of Zürich, S. Wildermuth, A. Buck / Univ. Hospital Zürich, K. Jäger / Univ. Hospital Basel, R. Kreis / Univ. Hospital Bern Modern medicine is a large consumer of physics technologies. The series of lectures covers medical imaging starting with an overview and the history of medical imaging. Then follows four lectures covering x-ray imaging positron emission tomography imaging blood flow by ultrasound magnetic resonance Monday 10 June 100 Years of Medical Imaging Pr. Gustav K. von Schulthess MD, PhD / University of Zurich History and overview of Medical Imaging Tuesday 11 June X-rays: still going strong Dr. Simon Wildermuth / MD, University Hospital Zurich Multidetector computed tomography: New developments and applications Wednesday 12 June Nuclear Medicine: PET Positron Emission Tomography Dr. Alfred Buck / MD, MSc, University...

  18. ACADEMIC TRAINING Physics Technologies in Medicine

    CERN Multimedia

    Françoise Benz

    2002-01-01

    10, 11, 12, 13, 14 June LECTURE SERIES from 11.00 to 12.00 hrs - Auditorium, bldg. 500 Physics Technologies in Medicine by G. K. Von Schulthess / Univ. of Z rich, S. Wildermuth, A. Buck / Univ. Hospital Z rich, K. Jäger / Univ. Hospital Basel, R. Kreis / Univ. Hospital Bern Modern medicine is a large consumer of physics technologies. The series of lectures covers medical imaging starting with an overview and the history of medical imaging. Then follows four lectures covering x-ray imaging positron emission tomography imaging blood flow by ultrasound magnetic resonance Monday 10 June 100 Years of Medical Imaging Pr. Gustav K. von Schulthess MD, PhD / University of Zurich History and overview of Medical Imaging Tuesday 11 June X-rays: still going strong Dr. Simon Wildermuth / MD, University Hospital Zurich Multidetector computed tomography: New developments and applications Wednesday 12 June Nuclear Medicine: PET Positron Emission Tomography Dr. Alfred Buck / MD, MSc, University Hospital Zurich Elucidati...

  19. [The place of information and communication technologies in nursing training].

    Science.gov (United States)

    Delon, Bruno

    2010-11-01

    Over the last two decades, technological progress, the old driving force of medical practices, has greatly accelerated the pace of innovation. The addition of information and communication technologies will provide a long-lasting transformation of healthcare practices. Modifications to the training programmes, as well as to the scope of nurses' actions, are perhaps the opportunity to become more actively involved in the innovation process.

  20. Bridging the Gap: Self-Directed Staff Technology Training

    Directory of Open Access Journals (Sweden)

    Kayla L. Quinney

    2010-12-01

    Full Text Available Undergraduates, as members of the Millennial Generation, are proficient in Web 2.0 technology and expect to apply these technologies to their coursework—including scholarly research. To remain relevant, academic libraries need to provide the technology that student patrons expect, and academic librarians need to learn and use these technologies themselves. Because leaders at the Harold B. Lee Library of Brigham Young University (HBLL perceived a gap in technology use between students and their staff and faculty, they developed and implemented the Technology Challenge, a self-directed technology training program that rewarded employees for exploring technology daily. The purpose of this paper is to examine the Technology Challenge through an analysis of results of surveys given to participants before and after the Technology Challenge was implemented. The program will also be evaluated in terms of the adult learning theories of andragogy and selfdirected learning. HBLL found that a self-directed approach fosters technology skills that librarians need to best serve students. In addition, it promotes lifelong learning habits to keep abreast of emerging technologies. This paper offers some insights and methods that could be applied in other libraries, the most valuable of which is the use of self-directed and andragogical training methods to help academic libraries better integrate modern technologies.

  1. National Wind Technology Center sitewide, Golden, CO: Environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

  2. The Savannah River Technology Center environmental monitoring field test platform

    Energy Technology Data Exchange (ETDEWEB)

    Rossabi, J.

    1993-03-05

    Nearly all industrial facilities have been responsible for introducing synthetic chemicals into the environment. The Savannah River Site is no exception. Several areas at the site have been contaminated by chlorinated volatile organic chemicals. Because of the persistence and refractory nature of these contaminants, a complete clean up of the site will take many years. A major focus of the mission of the Environmental Sciences Section of the Savannah River Technology Center is to develop better, faster, and less expensive methods for characterizing, monitoring, and remediating the subsurface. These new methods can then be applied directly at the Savannah River Site and at other contaminated areas in the United States and throughout the world. The Environmental Sciences Section has hosted field testing of many different monitoring technologies over the past two years primarily as a result of the Integrated Demonstration Program sponsored by the Department of Energy`s Office of Technology Development. This paper provides an overview of some of the technologies that have been demonstrated at the site and briefly discusses the applicability of these techniques.

  3. The Trail Inventory of The National Conservation Training Center [Cycle 1

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this report is to create a baseline inventory of all non-motorized trails on National Conservation Training Center. Trails in this inventory are...

  4. Research Center for Optical Physics: Education and Technology for the 21st Century

    Science.gov (United States)

    2003-01-01

    During the past eleven years since its inception, RCOP has excelled in its two primary goals: 1) training of the scientists and engineers needed for the twenty-first century with special emphasis on underrepresented citizens and 2) research and technological development in areas of relevance to NASA. In the category of research training, as of May 2003, RCOP produced 36 Bachelors degrees, 25 Masters degrees, and 13 Doctoral degrees. Of these, all 36 Bachelors degrees, 16 of the Masters degrees and 9 of the Doctoral degrees were awarded to African Americans. Four of the Doctoral graduates and one of the Masters graduates are working at NASA Field Centers. RCOP has also provided research experiences to 130 undergraduate students and 22 high school students through a number of outreach programs held during the summer and the academic year. RCOP has also been crucial to the development of the Ph.D. program in physics at Hampton University by providing high quality research training and technical electives required for a Doctoral degree in physics. RCOP has also excelled in research and technological development. Since 1992, RCOP researchers have leveraged over 8 million dollars in additional research funding, published 152 papers in refereed journals and proceedings, and given 125 presentations at refereed international conferences in the United States and eight other countries. RCOP also developed numerous collaborations with other research centers, universities and industries. In recognition of this outstanding work, RCOP is the first research center in the United States invited to join the Joint Open Laboratory for Laser Crystals and Precise Laser Systems headed by Dr. Alexander Kaminiskii of the Russian Academy of Sciences.

  5. Research and technology, fiscal year 1986, Marshall Space Flight Center

    Science.gov (United States)

    1986-01-01

    The Marshall Space Flight Center is continuing its vigorous efforts in space-related research and technology. Extensive activities in advanced studies have led to the approval of the Orbital Maneuvering Vehicle as a new start. Significant progress was made in definition studies of liquid rocket engine systems for future space transportation needs and the conceptualization of advanced laucnch vehicles. The space systems definition studies have brought the Advanced X-ray Astrophysics Facility and Gravity Probe-B to a high degree of maturity. Both are ready for project implementation. Also discussed include significant advances in low gravity sciences, solar terrestrial physics, high energy astrophysics, atmospheric sciences, propulsion systems, and on the critical element of the Space Shuttle Main Engine in particular. The goals of improving the productivity of high-cost repetitive operations on reusable transportation systems, and extending the useful life of such systems are examined. The research and technology highlighted provides a foundation for progress on the Hubble Space Telescope, the Space Station, all elements of the Space Transportation System, and the many other projects assigned to this Center.

  6. Implications of Surgical Training on Operating Room Throughput at Wilford Hall Medical Center

    Science.gov (United States)

    2008-06-26

    its physician specialists, 85 percent of dental specialists, and a full spectrum of other training. The medical center’s fourth mission is clinical...dedicated to training dental officers of the three services in one facility. The medical center’s support of San Antonio’s emergency medicine structure...P. (2006). Resident teaching versus the operating room schedule: An independent observer- based study of 1558 cases. Anesthesia and Analgesia , 103

  7. Development Principles of the Pedagogical System Aimed at Bachelor Training Based on Modern Information Technology

    Science.gov (United States)

    Kurymbayev, Sayat G.; Samashova, Gulfarida E.; Alshynbayeva, Zhuldyz E.; Mukhametzhanova, Aigul O.; Sharazdin, Adilzada M.; Kalybekova, Kalamkas S.; Kosybaeva, Umitzhan A.

    2016-01-01

    Modern education is aimed at training competent specialists, which requires modernizing the training process by implementing innovative technologies, especially information technologies. Information technologies allow quickly accessing necessary data, which speeds up the training process. This paper deals with issues related to training bachelors…

  8. CAD/CAM. High-Technology Training Module.

    Science.gov (United States)

    Zuleger, Robert

    This high technology training module is an advanced course on computer-assisted design/computer-assisted manufacturing (CAD/CAM) for grades 11 and 12. This unit, to be used with students in advanced drafting courses, introduces the concept of CAD/CAM. The content outline includes the following seven sections: (1) CAD/CAM software; (2) computer…

  9. Training Teachers to Use Technology: The Alabama Plan.

    Science.gov (United States)

    McFadden, Anna C.; Johnson, Eddie

    1993-01-01

    Discusses the need for teacher training in media use and describes a plan developed in Alabama consisting of a three-course sequence in technology for teacher education that can be incorporated into a master's degree program. Required primary computer skills and primary instructional design skills are listed. (Contains three references.) (LRW)

  10. A Virtual Reality Dance Training System Using Motion Capture Technology

    Science.gov (United States)

    Chan, J. C. P.; Leung, H.; Tang, J. K. T.; Komura, T.

    2011-01-01

    In this paper, a new dance training system based on the motion capture and virtual reality (VR) technologies is proposed. Our system is inspired by the traditional way to learn new movements-imitating the teacher's movements and listening to the teacher's feedback. A prototype of our proposed system is implemented, in which a student can imitate…

  11. Training Manual on Food Irradiation Technology and Techniques.

    Science.gov (United States)

    United Nations Food and Agriculture Organization, Rome (Italy).

    This training manual consists of two parts. The first covers general information and outlines various applications of food irradiation technology. The second section details laboratory exercises used to demonstrate the principles of radiation processing and the effects of radiation treatment on certain types of food. The chapters outline…

  12. Organisational and Technological Skills: The Overlooked Dimension of Research Training

    Science.gov (United States)

    Phelps, Renata; Fisher, Kath; Ellis, Allan

    2006-01-01

    Over the last three decades new technologies have emerged that have the capacity to considerably streamline the research and publication process and enhance the efficiency and effectiveness of research. This paper argues that to achieve high quality research training in the context of today's government and industry priorities, there must be a…

  13. A Virtual Reality Dance Training System Using Motion Capture Technology

    Science.gov (United States)

    Chan, J. C. P.; Leung, H.; Tang, J. K. T.; Komura, T.

    2011-01-01

    In this paper, a new dance training system based on the motion capture and virtual reality (VR) technologies is proposed. Our system is inspired by the traditional way to learn new movements-imitating the teacher's movements and listening to the teacher's feedback. A prototype of our proposed system is implemented, in which a student can imitate…

  14. Conceptual design report, Hazardous Materials Management and Emergency Response (HAMMER) Training Center

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, K.E. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-11-09

    For the next 30 years, the main activities at the US Department of Energy (DOE) Hanford Site will involve the management, handling, and cleanup of toxic substances. If the DOE is to meet its high standards of safety, the thousands of workers involved in these activities will need systematic training appropriate to their tasks and the risks associated with these tasks. Furthermore, emergency response for DOE shipments is the primary responsibility of state, tribal, and local governments. A collaborative training initiative with the DOE will strengthen emergency response at the Hanford Site and within the regional communities. Local and international labor has joined the Hazardous Materials Management and Emergency Response (HAMMER) partnership, and will share in the HAMMER Training Center core programs and facilities using their own specialized trainers and training programs. The HAMMER Training Center will provide a centralized regional site dedicated to the training of hazardous material, emergency response, and fire fighting personnel.

  15. Effects of proprioceptive training program on core stability and center of gravity control in sprinters.

    Science.gov (United States)

    Romero-Franco, Natalia; Martínez-López, Emilio; Lomas-Vega, Rafael; Hita-Contreras, Fidel; Martínez-Amat, Antonio

    2012-08-01

    The purpose of this study was to determinate the effect of a 6-week specific-sprinter proprioceptive training program on core stability and gravity center control in sprinters. Thirty-three athletes (age = 21.82 ± 4.84 years, height = 1.76 ± 0.07 m, weight = 67.82 ± 08.04 kg, body mass index = 21.89 ± 2.37 kg · m(-2)) from sprint disciplines were divided into a control (n = 17) and experimental (n = 16) groups. A 30-minute proprioceptive training program was included in the experimental group training sessions, and it was performed for 6 weeks, 3 times each week. This program included 5 exercises with the BOSU and Swiss ball as unstable training tools that were designed to reproduce different moments of the technique of a sprint race. Stability with eyes open (EO) and eyes closed, postural stability, and gravity center control were assessed before and after the training program. Analyses of covariance (α = 0.05) revealed significant differences in stability in the medial-lateral plane with EO, gravity center control in the right direction and gravity center control in the back direction after the exercise intervention in the experimental athletes. Nevertheless, no other significant differences were demonstrated. A sprinter-specific proprioceptive training program provided postural stability with EO and gravity center control measures improvements, although it is not clear if the effect of training would transfer to the general population.

  16. Examining learner-centered training with teen volunteer staff at an aquarium

    Science.gov (United States)

    Bautista, Raelene M.

    This research project examined the effects of a training program that focused on helping youth volunteers create a learner-centered interaction at an Aquarium. This study explored whether this learner centered training resulted in an increased ability to identify learner-centered engagement as well as reported changes in practice. Most research on training programs and professional development, that introduces learner-centered strategies examines adult teachers working in formal environments. This study examined youth volunteer staff in an informal science institution that participated in a weekly one-hour training for four weeks during their eight week long summer volunteer program. The data showed that some of topics introduced in the learner centered training, such as the importance of visitors' prior knowledge and the use of objects, were identified more often as good practice after the training. In addition, participants seemed to hold on to some of their original perceptions of good practices, such as providing positive reinforcement and modifying their physical posture to make the visitors feel comfortable. The investigation also revealed that conversation patterns changed in some participants' practice as a result of the training.

  17. Implementing the Training Values Statement Addressing Diversity in University Counseling Center Internships

    Science.gov (United States)

    Illfelder-Kaye, Joyce; Lese-Fowler, Karen; Bursley, Kevin; Reyes, Elizabeth; Bieschke, Kathleen J.

    2009-01-01

    This article examines the potential contribution of the "Counseling Psychology Model Training Values Statement Addressing Diversity" (henceforth the "Values Statement") to predoctoral internship training programs housed in university counseling centers. The purpose of this article is to present recommendations for how to best implement the Values…

  18. Briefing Paper regarding the Establishment of a Regional Technical and Industrial Skills Training Center.

    Science.gov (United States)

    Powell, Roger Baden

    In spring 1997, Oregon's Regional Workforce Committee commissioned a study to investigate the feasibility of creating a technical and industrial skills training center in Region 12 of the state. Interviews were conducted with 40 individuals from area companies, social service agencies, and training organizations regarding the need for such a…

  19. Personnel and Training Requirements for the ASR-21 Rescue Control Center.

    Science.gov (United States)

    DeLuca, Joseph F.; Noble, John F.

    This report covers personnel and training requirements for Rescue Control Center (RCC) twin hull submarine rescue ships (ASRs). Skills and knowledge similar to those of a sonar technician (ST-0408) and a data system technician (DS-1666) are needed to operate the special sonar set and computer based system, but no suitable Navy training facility…

  20. Implementing the Training Values Statement Addressing Diversity in University Counseling Center Internships

    Science.gov (United States)

    Illfelder-Kaye, Joyce; Lese-Fowler, Karen; Bursley, Kevin; Reyes, Elizabeth; Bieschke, Kathleen J.

    2009-01-01

    This article examines the potential contribution of the "Counseling Psychology Model Training Values Statement Addressing Diversity" (henceforth the "Values Statement") to predoctoral internship training programs housed in university counseling centers. The purpose of this article is to present recommendations for how to best implement the Values…

  1. Self-organization of head-centered visual responses under ecological training conditions.

    Science.gov (United States)

    Mender, Bedeho M W; Stringer, Simon M

    2014-01-01

    We have studied the development of head-centered visual responses in an unsupervised self-organizing neural network model which was trained under ecological training conditions. Four independent spatio-temporal characteristics of the training stimuli were explored to investigate the feasibility of the self-organization under more ecological conditions. First, the number of head-centered visual training locations was varied over a broad range. Model performance improved as the number of training locations approached the continuous sampling of head-centered space. Second, the model depended on periods of time where visual targets remained stationary in head-centered space while it performed saccades around the scene, and the severity of this constraint was explored by introducing increasing levels of random eye movement and stimulus dynamics. Model performance was robust over a range of randomization. Third, the model was trained on visual scenes where multiple simultaneous targets where always visible. Model self-organization was successful, despite never being exposed to a visual target in isolation. Fourth, the duration of fixations during training were made stochastic. With suitable changes to the learning rule, it self-organized successfully. These findings suggest that the fundamental learning mechanism upon which the model rests is robust to the many forms of stimulus variability under ecological training conditions.

  2. The National Resource Center on LGBT Aging provides critical training to aging service providers.

    Science.gov (United States)

    Meyer, Hilary; Johnston, Tim R

    2014-01-01

    The National Resource Center on LGBT Aging was created in 2010 by Services & Advocacy for Gay, Lesbian, Bisexual and Transgender Elders (SAGE) with seed funding from the US Department of Health and Human Services. Three years into the project, thousands of aging and LGBT service providers have been reached with training and technical assistance; however, a great need, especially for cultural competency training, remains.

  3. Advanced Stirling Technology Development at NASA Glenn Research Center

    Science.gov (United States)

    Shaltens, Richard K.; Wong, Wayne A.

    2007-01-01

    The NASA Glenn Research Center has been developing advanced energy-conversion technologies for use with both radioisotope power systems and fission surface power systems for many decades. Under NASA's Science Mission Directorate, Planetary Science Theme, Technology Program, Glenn is developing the next generation of advanced Stirling convertors (ASCs) for use in the Department of Energy/Lockheed Martin Advanced Stirling Radioisotope Generator (ASRG). The next-generation power-conversion technologies require high efficiency and high specific power (watts electric per kilogram) to meet future mission requirements to use less of the Department of Energy's plutonium-fueled general-purpose heat source modules and reduce system mass. Important goals include long-life (greater than 14-yr) reliability and scalability so that these systems can be considered for a variety of future applications and missions including outer-planet missions and continual operation on the surface of Mars. This paper provides an update of the history and status of the ASC being developed for Glenn by Sunpower Inc. of Athens, Ohio.

  4. Road maintaining and constructing machine training center project in Morocco; Morocco doro hoshu kensetsu kiki kunren center project

    Energy Technology Data Exchange (ETDEWEB)

    Hagiwara, T. [Japan Sewage Works Agency, Tokyo (Japan)

    1997-10-25

    This paper describes technical cooperation with Morocco on road maintenance. In the latter half of the 1980`s, road transportation accounted for 95% of traveler transportation and 80% of freight transportation. Thereafter, construction of new roads has been reduced due to financial situation, and maintenance of the existing roads has become the core of road project of the government. The government has requested Japan in 1986 a gratuitous fund cooperation required for building a training facility for road maintenance, and technical cooperation for implementing the training courses. The Japan International Cooperation Agency has built the Morocco road maintaining and constructing machine training center under a gratuitous fund cooperation of about 1.6 billion yen, and provided construction machines, and other machines and appliances. The center inauguration ceremony was held in July 1993. The Japanese side has provided implements and materials, sent professional persons, and accepted trainees. The Moroccan side has taken burden of land development, construction of staff boarding houses and locative structures, and other local costs. The center holds 35 official staff members. The training courses cover operation, servicing, management of machines, and road maintenance, and have a total of 719 persons completed the courses. The five-year project has been completed, and the subsequent project is now being performed by the Moroccan side alone. 5 figs., 4 tabs.

  5. Validation of the Training Benefit Forecasting Method: Recreational Vehicle Service Training. Training and Development Research Center: Project Number Six.

    Science.gov (United States)

    Swanson, Richard A.; Geroy, Gary D.

    The validity of the Training Benefit Forecasting Method (TBFM) in a recreational vehicle service training setting was studied. Cost-benefit issues were associated with the Onan Service School change from a field-based Recreational Vehicle Generator Set training program to a customer-delivered self-instructional training program. Actual costs and…

  6. Remote Sensing Training for Middle School through the Center of Excellence in Remote Sensing Education

    Science.gov (United States)

    Hayden, L. B.; Johnson, D.; Baltrop, J.

    2012-12-01

    Remote sensing has steadily become an integral part of multiple disciplines, research, and education. Remote sensing can be defined as the process of acquiring information about an object or area of interest without physical contact. As remote sensing becomes a necessity in solving real world problems and scientific questions an important question to consider is why remote sensing training is significant to education and is it relevant to training students in this discipline. What has been discovered is the interest in Science, Technology, Engineering and Mathematics (STEM) fields, specifically remote sensing, has declined in our youth. The Center of Excellence in Remote Sensing Education and Research (CERSER) continuously strives to provide education and research opportunities on ice sheet, coastal, ocean, and marine science. One of those continued outreach efforts are Center for Remote Sensing of Ice Sheets (CReSIS) Middle School Program. Sponsored by the National Science Foundation CReSIS Middle School Program offers hands on experience for middle school students. CERSER and NSF offer students the opportunity to study and learn about remote sensing and its vital role in today's society as it relate to climate change and real world problems. The CReSIS Middle School Program is an annual two-week effort that offers middle school students experience with remote sensing and its applications. Specifically, participants received training with Global Positioning Systems (GPS) where the students learned the tools, mechanisms, and applications of a Garmin 60 GPS. As a part of the program the students were required to complete a fieldwork assignment where several longitude and latitude points were given throughout campus. The students had to then enter the longitude and latitude points into the Garmin 60 GPS, navigate their way to each location while also accurately reading the GPS to make sure travel was in the right direction. Upon completion of GPS training the

  7. 75 FR 22160 - National Conservation Training Center Logo

    Science.gov (United States)

    2010-04-27

    ... than 1 inch wide or with a font size smaller than 4.5 points. The Graphic Design and Publishing Branch... Shepherdstown, West Virginia. We will use this new logo as the Center's official graphic representation, for the....gov . SUPPLEMENTARY INFORMATION: We designate the indicated graphic depiction of the National...

  8. 高职院校现代制造技术省级技能实训中心的建设研究%Research on construction of provincial skills training center by using modern manufacturing technology in higher vocational colleges

    Institute of Scientific and Technical Information of China (English)

    王城华

    2013-01-01

    Skills training is an efficient way to enhance the professional skills and the sense of innovation of vocational college students .In view of the practice in the provincial skills training center in Jiujiang Vocational and Technical College ,the importance ,localization ,thought and design are explained .It can provide a reference for similar colleges in constructing skills training center .%技能训练是高职学生提高专业技能、培养创新意识的有效途径。文章结合九江职业技术学院省级技能实训中心建设的实践,对建设技能实训中心的意义、定位、思路、方案设计等进行了系统阐述,为同类学校实训中心建设提供参考。

  9. Evaluation of the Tuberculosis Infection Control Training Center, Tajikistan, 2014-2015.

    Science.gov (United States)

    Scott, C; Mangan, J; Tillova, Z; Jensen, P A; Ahmedov, S; Ismoilova, J; Trusov, A

    2017-05-01

    Training center on tuberculosis (TB) infection control (IC) for health care workers in the Central Asian Republics region. To assess the effects of TB IC training courses conducted at the Tuberculosis Infection Control Training Center in Machiton, Tajikistan. Participants who participated in training (n = 89) during the first year of operation (April 2014-February 2015) were invited to participate in a post-training interview. Of the 89 participants, 84 (94%) completed the interview and expressed satisfaction with the training. Eighty (95%) participants reported meeting with workplace leadership to discuss the training. Of these, 69 (85%) reported discussing changes required to meet TB IC standards. Self-reported changes in TB IC practices at work facilities post training included the creation of TB IC committees, designation of a TB IC focal person, TB IC planning, policies to separate infectious patients in waiting rooms, provision of masks for infectious patients, development of cough etiquette policies, improved glove availability, hand hygiene programs, and TB IC posters in waiting rooms. Participant satisfaction and reported changes in TB IC activities illustrate the potential of these training courses to improve TB IC in the region. Future training courses may be tailored to specific audiences using a structured conceptual framework to impact administration, budgeting, and facilities management of TB IC practices.

  10. Evaluation of the Tuberculosis Infection Control Training Center, Tajikistan, 2014–2015

    Science.gov (United States)

    Scott, C.; Mangan, J.; Tillova, Z.; Jensen, P. A.; Ahmedov, S.; Ismoilova, J.; Trusov, A.

    2017-01-01

    SUMMARY SETTING Training center on tuberculosis (TB) infection control (IC) for health care workers in the Central Asian Republics region. OBJECTIVE To assess the effects of TB IC training courses conducted at the Tuberculosis Infection Control Training Center in Machiton, Tajikistan. DESIGN Participants who participated in training (n = 89) during the first year of operation (April 2014–February 2015) were invited to participate in a post-training interview. RESULTS Of the 89 participants, 84 (94%) completed the interview and expressed satisfaction with the training. Eighty (95%) participants reported meeting with workplace leadership to discuss the training. Of these, 69 (85%) reported discussing changes required to meet TB IC standards. Self-reported changes in TB IC practices at work facilities post training included the creation of TB IC committees, designation of a TB IC focal person, TB IC planning, policies to separate infectious patients in waiting rooms, provision of masks for infectious patients, development of cough etiquette policies, improved glove availability, hand hygiene programs, and TB IC posters in waiting rooms. CONCLUSIONS Participant satisfaction and reported changes in TB IC activities illustrate the potential of these training courses to improve TB IC in the region. Future training courses may be tailored to specific audiences using a structured conceptual framework to impact administration, budgeting, and facilities management of TB IC practices. PMID:28399974

  11. [Activities of Goddard Earth Sciences and Technology Center, Maryland University

    Science.gov (United States)

    2003-01-01

    The Goddard Space Flight Center (GSFC) is recognized as a world leader in the application of remote sensing and modeling aimed at improving knowledge of the Earth system. The Goddard Earth Sciences Directorate plays a central role in NASA's Earth Observing System and the U.S. Global Change Research Program. Goddard Earth Sciences and Technology (GEST) is organized as a cooperative agreement with the GSFC to promote excellence in the Earth sciences, and is a consortium of universities and corporations (University of Maryland Baltimore County, Howard University, Hampton University, Caelum Research Corporation and Northrop Grumman Corporation). The aim of this new program is to attract and introduce promising students in their first or second year of graduate studies to Oceanography and Earth system science career options through hands-on instrumentation research experiences on coastal processes at NASA's Wallops Flight Facility on the Eastern Shore of Virginia.

  12. An organizational survey of the Pittsburgh Energy Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Stock, D.A.; Shurberg, D.A.; Haber, S.B.

    1991-09-01

    An Organizational Survey (OS) was administrated at the Pittsburgh Energy Technology Center (PETC) that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concerns, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of culture''; that is, the values attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization.

  13. An organizational survey of the Pittsburgh Energy Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Stock, D.A.; Shurberg, D.A.; Haber, S.B.

    1991-09-01

    An Organizational Survey (OS) was administrated at the Pittsburgh Energy Technology Center (PETC) that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concerns, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of ``culture``; that is, the values attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization.

  14. Center for Technology for Advanced Scientific Component Software (TASCS)

    Energy Technology Data Exchange (ETDEWEB)

    Damevski, Kostadin [Virginia State Univ., Petersburg, VA (United States)

    2009-03-30

    A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

  15. 14 CFR 142.53 - Training center instructor training and testing requirements.

    Science.gov (United States)

    2010-01-01

    ... teaching, instruction methods, and techniques; (iii) Instructor duties, privileges, responsibilities, and limitations; (iv) Training policies and procedures; (v) Cockpit resource management and crew coordination;...

  16. Academic Training: Technological challenges for LHC experiments, the CMS example

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 28 February, 1, 2, 3 & 4 March from 11.00 to 12.00 hrs - Main Auditorium, bldg. 500 Technological challenges for LHC experiments, the CMS example by P. SPHICAS/CERN-PH, G. DISSERTORI/ETH, Zürich, Ch. M. MANNELLI/CERN-PH, G. HALL/Imperial College, London. GB, P. FABBRICATORE/INFN, Genova, I Monday 28 February Design principles and performances of CMS P. Sphicas/CERN-PH Tuesday 1st March Crystal calorimetry in LHC environment G. Dissertori/ETH Zürich, CH Wednesday 2 March Silicon tracking in LHC environment M. Mannelli/CERN-PH Thursday 3 March Radhard fast electronics for LHC experiments G. Hall/Imperial College London, GB Friday 4 March Design principles of thin high field superconducting solenoids P. Fabbricatore/INFN Genova, I ENSEIGNEMENT ACADEMIQUE ACADEMIC TRAINING Françoise Benz 73127 academic.training@cern.ch

  17. Academic Training: Technological challenges for LHC experiments, the CMS example

    CERN Document Server

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 28 February, 1, 2, 3 & 4 March from 11.00 to 12.00 hrs - Main Auditorium, bldg. 500 Technological challenges for LHC experiments, the CMS example by P. SPHICAS/CERN-PH, G. DISSERTORI/ETH, Zürich, Ch. M. MANNELLI/CERN-PH, G. HALL/Imperial College, London. GB, P. FABBRICATORE/INFN, Genova, I Monday 28 February Design principles and performances of CMS P. Sphicas/CERN-PH Tuesday 1st March Crystal calorimetry in LHC environment G. Dissertori/ETH Zürich, CH Wednesday 2 March Silicon tracking in LHC environment M. Mannelli/CERN-PH Thursday 3 March Radhard fast electronics for LHC experiments G. Hall/Imperial College London, GB Friday 4 March Design principles of thin high field superconducting solenoids P. Fabbricatore/INFN Genova, I ENSEIGNEMENT ACADEMIQUE ACADEMIC TRAINING Françoise Benz 73127 academic.training@cern.ch

  18. New weather depiction technology for night vision goggle (NVG) training

    Science.gov (United States)

    Theleman, Scott; Hegarty, Jennifer; Vollmerhausen, Richard; Scott, Courtney; Schroeder, John; Colby, Frank P.; Napier, S.

    2006-08-01

    US Navy and Marine Corps pilots receive Night Vision Goggle (NVG) training as part of their overall training to maintain the superiority of our forces. This training must incorporate realistic targets; backgrounds; and representative atmospheric and weather effects they may encounter under operational conditions. An approach for pilot NVG training is to use the Night Imaging and Threat Evaluation Laboratory (NITE Lab) concept. The NITE Labs utilize a 10' by 10' static terrain model equipped with both natural and cultural lighting that are used to demonstrate various illumination conditions, and visual phenomena which might be experienced when utilizing night vision goggles. With this technology, the military can safely, systematically, and reliably expose pilots to the large number of potentially dangerous environmental conditions that will be experienced in their NVG training flights. This paper describes work that is being performed for NAVAIR to add realistic atmospheric and weather effects to the NVG NITE Lab training facility using the NVG-WDT (Weather Dipiction Technology) system. NVG-WDT consist of a high end multiprocessor server with weather simulation software, and several fixed and goggle mounted Heads Up Displays (HUDs). Atmospheric and weather effects are simulated using state-of-the-art computer codes such as the NCAR/Penn State Mesoscale Model (MM5); and the US Air Force Research Laboratory MODTRAN radiative transport model. Imagery for a variety of natural and man-made obscurations (e.g. rain, clouds, snow, dust, smoke, chemical releases) is being calculated and injected into the scene observed through the NVG via the fixed and goggle mounted HUDs.

  19. NEEMO 21: Tools, Techniques, Technologies & Training for Science Exploration EVA

    Science.gov (United States)

    Graff, Trevor

    2016-01-01

    The 21st mission of the NASA Extreme Environment Mission Operations (NEEMO) was a highly integrated operational test and evaluation of tools, techniques, technologies, and training for science driven exploration during Extravehicular Activity (EVA).The 16-day mission was conducted from the Aquarius habitat, an underwater laboratory, off the coast of Key Largo, FL. The unique facility, authentic science objectives, and diverse skill-sets of the crew/team facilitate the planning and design for future space exploration.

  20. A way of integrating technological tools into teacher training

    Directory of Open Access Journals (Sweden)

    Susana Molina Martín

    2009-04-01

    Full Text Available This paper presents an experience of didactic innovation and its impact on the learning of teacher training students who took a course on School Organization. With the innovation described here we attempted to use technological tools with our students as a positive stimulus during the teaching and learning processes which would enable them to learn more effectively. Students considered this experience as positive and they got better marks than students in the previous academic year.

  1. Russia’s Cosmonauts Inside the Yuri Gagarin Training Center

    CERN Document Server

    Hall, Rex D; Vis, Bert

    2005-01-01

    With the aid of unique photographs, first-hand interviews and historical resources, Rex Hall, Dave Shayler and Bert Vis explain, for the very first time, how Russian citizens have been selected and trained to fly in space, and how these procedures have changed during the past 40 years. The authors also describe the evolution of the often overlooked ground support infrastructure and how the role of cosmonauts has changed from the very earliest days of the Gagarin era, through the demise of the Soviet Union, to the era of international co-operation and collaboration on programmes such as the International Space Station. The book will provide much important background information and insight to the operational Soviet/Russian manned space programme, already covered in other Springer-Praxis titles, but revealing information and facts not covered elsewhere, and providing a unique reference source for all those who wish to understand the changing role of Russian cosmonauts in today’s global space programme.

  2. Health Information Technology Adoption in California Community Health Centers

    Science.gov (United States)

    Kim, Katherine K.; Rudin, Robert S.; Wilson, Machelle D.

    2016-01-01

    Objectives National and state initiatives to spur adoption of electronic health record (EHR) use and health information exchange (HIE) among providers in rural and underserved communities have been in place for 15 years. Our goal was to systematically assess the impact of these initiatives by quantifying the level of adoption and key factors associated with adoption among community health centers (CHCs) in California. Study Design Cross-sectional statewide survey. Methods We conducted a telephone survey of all California primary care CHCs from August to September 2013. Multiple logistic regressions were fit to test for associations between various practice characteristics and adoption of EHRs, Meaningful Use (MU)–certified EHRs, and HIE. For the multivariable model, we included those variables which were significant at the P = .10 level in the univariate tests. Results We received responses from 194 CHCs (73.5% response rate). Adoption of any EHRs (80.3%) and MU–certified EHRs (94.6% of those with an EHR) was very high. Adoption of HIE is substantial (48.7%) and took place within a few years (mean = 2.61 years; SD = 2.01). More than half (54.7%) of CHCs are able to receive data into the EHR, indicating some level of interoperability. Patient engagement capacity is moderate, with 21.6% offering a personal health record, and 55.2% electronic visit summaries. Rural location and belonging to a multi-site clinic organization both increase the odds of adoption of EHRs, HIE, and electronic visit summary, with odds ratios ranging from 0.63 to 3.28 (all P values <.05). Conclusions Greater adoption of health information technology (IT) in rural areas may be the result of both federal and state investments. As CHCs lack access to capital for investments, continued support of technology infrastructure may be needed for them to further leverage health IT to improve healthcare. PMID:26760431

  3. Technology Transfer from University-Based Research Centers: The University of New Mexico Experience.

    Science.gov (United States)

    Rogers, Everett M.; Hall, Brad; Hashimoto, Michio; Steffensen, Morten; Speakman, Kristen L.; Timko, Molly K.

    1999-01-01

    A study of 55 research centers at the University of New Mexico investigated the nature of the typical center, why funding has risen during the 1990s, reasons for founding the centers, the director's role, how university-based research centers transfer technology to private companies and other organizations, and what determines program…

  4. FLIPPED CLASSROOM TECHNOLOGY IN DISTANCE AND FULL-TIME TRAINING

    Directory of Open Access Journals (Sweden)

    Oleksandr I. Volnevych

    2013-09-01

    Full Text Available In the present paper there are considered some aspects of the application of new technology of learning process «flipped classroom» formation on the basis of dynamic video lectures in full-time and distance learning. The considered technology is aimed at enhancing the value of students’ independent work, primarily — through creative approach to creation of the lecture material conspectus. Reallocation of learning hours in the direction of increasing time of practical work contributes to the development of students' skills in applying the acquired knowledge. It is presented brief information about the implementation of this technology: definition of screencast, which is actually the base for creation of dynamic video lectures, the main characteristics of the existing software designed for the implementation of training video courses.

  5. Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

  6. Technology evaluation center assessment synopsis: full-field digital mammography.

    Science.gov (United States)

    Rothenberg, Barbara M; Ziegler, Kathleen M; Aronson, Naomi

    2006-08-01

    Full-field digital mammography (FFDM) is proposed as an alternative to screen-film mammography (SFM). The ability to separate and optimize the acquisition, storage, and display of images may allow greater visualization of breast cancers at equal or lower radiation doses, especially in younger women and those with denser breasts. This is a synopsis of a systematic review by the Blue Cross Blue Shield Association Technology Evaluation Center. This updated systematic review primarily incorporated the results of the ACR Imaging Network(R) Digital Mammographic Imaging Screening Trial (DMIST), which provided results on 42,760 asymptomatic women who underwent both FFDM and SFM and showed with reasonable certainty that there was no difference in the accuracy of the 2 modalities for asymptomatic women in general, with some advantages of FFDM in certain subgroups. There were no strong, new studies on the use of digital mammography compared with film mammography in a diagnostic population. However, the DMIST results indicated that tumors detected by FFDM, but not by SFM, were likely to be invasive carcinomas or medium-grade to high-grade ductal carcinoma in situ. On the basis of the suppositions that these are the cancers of greatest interest and the ones more likely to be found in a diagnostic population and that the diagnostic population may be younger on average than the screening population, it was concluded that there is sufficient evidence to support the use of FFDM for diagnostic purposes.

  7. Turbine Inflow Characterization at the National Wind Technology Center: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, A.; Schreck, S.; Scott, G.; Kelley, N.; Lundquist, J.

    2012-01-01

    Utility-scale wind turbines operate in dynamic flows that can vary significantly over timescales from less than a second to several years. To better understand the inflow to utility-scale turbines, two inflow towers were installed and commissioned at the National Renewable Energy Laboratory's (NREL) National Wind Technology Center near Boulder, Colorado, in 2011. These towers are 135 m tall and instrumented with a combination of sonic anemometers, cup anemometers, wind vanes, and temperature measurements to characterize the inflow wind speed and direction, turbulence, stability and thermal stratification to two utility-scale turbines. Herein, we present variations in mean and turbulent wind parameters with height, atmospheric stability, and as a function of wind direction that could be important for turbine operation as well as persistence of turbine wakes. Wind speed, turbulence intensity, and dissipation are all factors that affect turbine performance. Our results shown that these all vary with height across the rotor disk, demonstrating the importance of measuring atmospheric conditions that influence wind turbine performance at multiple heights in the rotor disk, rather than relying on extrapolation from lower levels.

  8. Environmental Assessment of the Muscatatuck Urban Training Center near Butlerville, Indiana, October and November 2005

    Science.gov (United States)

    Risch, Martin R.; Ulberg, Amanda L.; Robinson, Bret A.

    2007-01-01

    An environmental assessment of the Muscatatuck Urban Training Center near Butlerville in Jennings County, Indiana, was completed during October and November 2005. As part of the Department of Defense Earth Science Program, the U.S. Geological Survey collected information about environmental conditions at the 825-acre former State of Indiana mental health facility prior to its conversion by the Indiana National Guard into an urban training center. The assessment was designed to investigate the type and extent of potential contamination associated with historical activities in selected areas of the facility.

  9. Implementing PDA technology in a medical library: experiences in a hospital library and an academic medical center library.

    Science.gov (United States)

    Morgen, Evelyn Breck

    2003-01-01

    Personal digital assistants (PDAs) have grown from being a novelty in the late 1990s to an essential tool for healthcare professionals in the 2000s. This paper describes the experiences of a librarian who implemented PDA technology first in a hospital library, and then at an academic medical center library. It focuses on the role of the library in supporting PDA technology and resources. Included are programmatic issues such as training for library staff and clinicians, and technical issues such as Palm and Windows operating systems. This model could be used in either a hospital or academic health sciences library.

  10. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center

    Science.gov (United States)

    1976-01-01

    Updated information is given pertaining to Technology Use Studies Center (TUSC) clients who are those that receive/use information as disseminated by the center. The client information is presented as a continuation of client data as set forth in the center's previous annual report.

  11. Environment, Safety and Health Progress Assessment of the Morgantown Energy Technology Center (METC)

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    This report documents the result of the US Department of Energy`s (DOE) Environment, Safety and Health (ES&H) Progress Assessment of the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. METC is currently a research and development facility, managed by DOE`s Office of Fossil Energy. Its goal is to focus energy research and development to develop engineered fossil fuel systems, that are economically viable and environmentally sound, for commercial application. There is clear evidence that, since the 1991 Tiger Team Assessment, substantial progress has been made by both FE and METC in most aspects of their ES&H program. The array of new and restructured organizations, systems, and programs at FE and METC; increased assignments of staff to support these initiatives; extensive training activities; and the maturing planning processes, all reflect a discernable, continuous improvement in the quality of the ES&H performance.

  12. Model of Activities of the Resource Training Center of the Russian State Social University in Terms of Professional Orientation and Employment of Persons with Disabilities

    Directory of Open Access Journals (Sweden)

    Bikbulatova A.A.,

    2017-08-01

    Full Text Available The paper focuses on the importance of professional and vocational guidance for persons with disabilities. It describes the main approaches to providing such type of guidance to the disabled students and reveals the technologies of motivating people with disabilities to seek education and to make informed choices of profession. The research was aimed at developing the model of career guidance offered at resource and training centers established by the Ministry of Education and Science of the Russian Federation on the basis higher educational institutions. The paper presents the developed model of professional and vocational guidance for persons with disabilities and explains the algorithm of its implementation in the resource and training centers. Also, the paper gives recommendations on how to change the technology of communication between universities, regional job centers and offices of medical and social assessment.

  13. Validation of the Training Benefit Forecasting Method: Geometric Dimension & Tolerance Training. Training and Development Research Center: Project Number Two.

    Science.gov (United States)

    Geroy, Gary D.

    The validity of the University of Minnesota Skills Training Cost-Benefit Forecasting Model (STCBFM) in a corporate setting was studied. Research and related literature suggested that a model for forecasting the economic benefits of training should include facility to identify and summarize costs and provide an assessment of the value of the…

  14. Training Needs Assessment and Training Technology Transfer in U.S. Army Europe (USAREUR): 1985

    Science.gov (United States)

    1987-03-01

    cavalry vehicle crewmembers, USAREUR is requesting ARI MI Abrams products from the Armor School, and success here will be followed by a push to obtain ARI...Armori I I I IH Call andadjust indirect fire tecnology .......... t p:’"I ~ III I I I I I Smart Technology For Training .....................F1F 1... pushed for a similar evaluation. Successful transfer of the Procedure Guides is being sought first, to be followed up by efforts to field evaluate the

  15. A description of manual wheelchair skills training: current practices in Canadian rehabilitation centers.

    Science.gov (United States)

    Best, Krista L; Routhier, François; Miller, William C

    2015-01-01

    To describe current practices for manual wheelchair (MWC) skills training in Canadian rehabilitation centers. An online survey was sent to practice leaders in occupational (OT) and physical therapy (PT) at 87 Canadian rehabilitation centers. Responses were solicited from individuals who could report about wheelchair skills training at facilities with at least 10 beds designated for rehabilitation. Thirty-four questions asked about: (1) demographics, (2) components of MWC training, (3) amount of MWC skills training, (4) use of validated programs and (5) perceived barriers to using validated programs. Data were analyzed using summary statistics. About 68/87 responses were received primarily from OTs (42/68). Basic MWC skills training (e.g. wheel-locks) was consistently part of clinical practice (45/68), while advanced skills training (e.g. curb-cuts) was rare (8/68). On an average, 1-4 h of training was done (29/68). Validated training programs were used by 16/68, most of whom used them "rarely" (7/16). Common barriers to using validated programs were lack of time (43/68) and resources (39/68). Learning to use a wheelchair is important for those with ambulation impairments because the wheelchair enables mobility and social participation. Providing opportunities for advanced wheelchair skills training may enhance mobility and social participation in a safe manner. Implications for Rehabilitation There is evidence confirming the benefits of a validated wheelchair skills program, yet most clinicians do no not use them. A variety of perceived barriers may help to explain the limited use of existing programs, such as time, resources and knowledge. Effective knowledge translation efforts may help alleviate some of these barriers, and novel wheelchair training approaches may alleviate some burden on clinicians to help accommodate the increasing number of older wheelchair users.

  16. Training programme for the dissemination of climatological and meteorological applications using GIS technology

    Directory of Open Access Journals (Sweden)

    T. De Filippis

    2006-01-01

    Full Text Available IBIMET-CNR is involved in making different research projects and in managing operational programmes on national and international level and has acquired a relevant training competence to sustain partner countries and improve their methodological and operational skills by using innovative tools, such as Geographical Information Systems focused on the development of meteorological and climatological applications. Training activities are mainly addressed to National Meteorological and Hydrological Services of Partner-Countries and/or to other Specialized Centers in the frame of Cooperation Programmes promoted by the Italian Ministry of Foreign Affairs mainly in favour of the Less Developing Countries (LDC of World Meteorological Organisation (WMO Regional Association I (Africa. The Institute, as a branch of the WMO-Regional Meteorological Training Centre for Region VI (Europe, organizes also international training courses of high-level in Meteorology, Climatology and Remote Sensing applied to environment and agriculture fields. Moreover, considering the increasing evolution of the GIS functions for meteorological information users, IBIMET has promoted in 2005 the EU COST Action 719 Summer School on "GIS applications in meteorology and climatology''. The paper offers an overview of the main institute training programmes organised to share the results of research activities and operational projects, through the exploitation of innovative technologies and tools like GIS.

  17. Training programme for the dissemination of climatological and meteorological applications using GIS technology

    Science.gov (United States)

    de Filippis, T.; di Vecchia, A.; Maracchi, G.; Sorani, F.

    2006-06-01

    IBIMET-CNR is involved in making different research projects and in managing operational programmes on national and international level and has acquired a relevant training competence to sustain partner countries and improve their methodological and operational skills by using innovative tools, such as Geographical Information Systems focused on the development of meteorological and climatological applications. Training activities are mainly addressed to National Meteorological and Hydrological Services of Partner-Countries and/or to other Specialized Centers in the frame of Cooperation Programmes promoted by the Italian Ministry of Foreign Affairs mainly in favour of the Less Developing Countries (LDC) of World Meteorological Organisation (WMO) Regional Association I (Africa). The Institute, as a branch of the WMO-Regional Meteorological Training Centre for Region VI (Europe), organizes also international training courses of high-level in Meteorology, Climatology and Remote Sensing applied to environment and agriculture fields. Moreover, considering the increasing evolution of the GIS functions for meteorological information users, IBIMET has promoted in 2005 the EU COST Action 719 Summer School on "GIS applications in meteorology and climatology''. The paper offers an overview of the main institute training programmes organised to share the results of research activities and operational projects, through the exploitation of innovative technologies and tools like GIS.

  18. George C. Marshall Space Flight Center Research and Technology Report 2014

    Science.gov (United States)

    Keys, A. S. (Compiler); Tinker, M. L. (Compiler); Sivak, A. D. (Compiler)

    2015-01-01

    Many of NASA's missions would not be possible if it were not for the investments made in research advancements and technology development efforts. The technologies developed at Marshall Space Flight Center contribute to NASA's strategic array of missions through technology development and accomplishments. The scientists, researchers, and technologists of Marshall Space Flight Center who are working these enabling technology efforts are facilitating NASA's ability to fulfill the ambitious goals of innovation, exploration, and discovery.

  19. Development of a Mobility Training Program for Young Adult Trainable Mentally Handicapped Clients at the Ray Graham Training Center. Maxi II Practicum Report.

    Science.gov (United States)

    Jordan, Ellen M.

    Provided is a practicum report on a travel training program initiated at the Ray Graham Training Center (Chicago, Illinois) for 40 trainable mentally handicapped young adults. The center is described in terms of the geographic area and clients served, staff roles, parent role, and curriculum. It is noted that a prime impetus for the development of…

  20. Planning nuclear energy centers under technological and demand uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Meier, P.M.; Palmedo, P.F.

    1976-01-01

    The question considered is whether new nuclear power plants should be located in nuclear energy centers, or ''power parks'' with co-located fabrication and reprocessing facilities. That issue has been addressed in a recent study by the Nuclear Regulatory Commission and remains under investigation at Brookhaven and elsewhere. So far, however, the advisability of this policy has been analyzed primarily within the framework of a single view of the future. Suggestions of the types of questions that should be asked regarding this policy if it is properly to be viewed as an example of decision making under uncertainty are made. It is concluded that ''A consideration of the various uncertainties involved in the question of dispersed vs. remote siting of energy facilities introduces a number of new elements into the analysis. On balance those considerations provide somewhat greater support for the clustered concept. The NEC approach seems to provide somewhat greater flexibility in accomodating possible future electricity generating technologies. Increased regulatory and construction efficiencies possible in an NEC reduces the impact of demand uncertainty as does the lower costs associated with construction acceleration or deceleration.'' It is also noted that, in the final analysis, ''it is the public's perception of the relative costs and benefits of a measure that determine the acceptability or unacceptability of a particular innovation,'' not the engineer's cost/benefit analysis. It is further noted that if the analysis can identify limits on analytical methods and models, it will not make the job of energy decision-making any easier, but it may make the process more responsive to its impact on society. (MCW)

  1. Forecasting the Economic Benefits of Training. Training and Development Research Center: Project Number One.

    Science.gov (United States)

    Swanson, Richard A.; Geroy, Gary D.

    Analysis of the economics of training has become one of the most important issues of the decade for business and industry. Unfortunately, managers typically digress to a simple cost analysis and ignore the realities of cost-benefit analysis and the potential of large financial benefits to the organization. A proposed model to forecast training…

  2. Florida Public Health Training Center: Evidence-Based Online Mentor Program

    Science.gov (United States)

    Frahm, Kathryn A.; Alsac-Seitz, Biray; Mescia, Nadine; Brown, Lisa M.; Hyer, Kathy; Liburd, Desiree; Rogoff, David P.; Troutman, Adewale

    2013-01-01

    This article describes an Online Mentor Program (OMP) designed to support and facilitate mentorships among and between Florida Department of Health (FDOH) employees and USF College of Public Health students using a Web-based portal. The Florida Public Health Training Center (FPHTC) at the University of South Florida (USF) College of Public Health…

  3. Analysis of the Cost of Training Residents in a Community Health Center.

    Science.gov (United States)

    Jones, Timothy F.; And Others

    1995-01-01

    The costs of outpatient training for medical residents in a community health center (CHC) are analyzed, based on a family practice residency of one medical school. The model used a computer spreadsheet program to determine the financial impact of the program on the CHC. Sensitivity analyses determined the effects of changing productivity, nursing…

  4. 77 FR 41387 - Applications for New Awards; Rehabilitation Research and Training Center on Vocational...

    Science.gov (United States)

    2012-07-13

    ... research in refereed journals. The number of products (e.g., new or improved tools, methods, discoveries... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF EDUCATION Applications for New Awards; Rehabilitation Research and Training Center on Vocational Rehabilitation...

  5. Exposure to respirable dust and crystalline silica in bricklaying education at Dutch vocational training centers.

    NARCIS (Netherlands)

    Huizer, D.; Spee, T.; Lumens, M.E.G.L.; Kromhout, H.

    2010-01-01

    BACKGROUND: Construction workers are educated at vocational training centers before they begin their working lives. Future bricklayers and their instructors are exposed to respirable dust and possibly to hazardous respirable crystalline silica from trial mortar. METHODS: Thirty-six personal air samp

  6. Teaching Reflections about the Architectural Design of the Vocational Training Centers in Granada

    Science.gov (United States)

    Rodríguez, Luis; Gallego, José L.; Rodríguez, Antonio V.

    2016-01-01

    If the specificity of the architectural space is considered as a measuring element in the education scope to value the prominence of teaching throughout history, it is worth mentioning that the configuration of the vocational training center as a first-rate education scenario that arrives half century of delay with respect to schools, has few…

  7. Emergency management training in Korea: combining and balancing supply- and demand-centered paradigms.

    Science.gov (United States)

    Ha, Kyoo-Man; Park, Sosoon; Yoon, Yi; Nam, Ki-Hun; Oh, Hyeon-Mun

    2015-01-01

    This article aims to encourage NEMA (or newly named as MPSS) to combine its supply-centered paradigm with a newly proposed "demand-centered paradigm" in the Korean field of emergency management training (EMT). Based on qualitative content analysis, this paper defined the current field of EMT to be a supply-centered paradigm via three components: locations, courses, and participants. This paradigm focuses on EMT provision as supplied and dictated by the national government. On the other hand, a demand-centered model is about looking into stakeholders' actual needs for EMT. In this regard, alternatives with reference to the demand-centered paradigm via the same three components were discussed and considered. The key tenet is that having revealed that NEMA has unequivocally focused on the results side or effectiveness of EMT via a supply-centered paradigm, Korea should address and consider the same three components, this time by fusing and incorporating a fair process of EMT by enlisting active roles from the local community, academic scholars, and civilian training attendees in a demand-centered paradigm.

  8. Integrated Geospatial Education and Technology Training (iGETT) for Workforce Development

    Science.gov (United States)

    Allen, J. E.; Johnson, A.; Headley, R. K.

    2009-12-01

    The increasing availability of no-cost remote sensing data and improvements in analysis software have presented an unprecedented opportunity for the integration of geospatial technologies into a wide variety of disciplines for learning and teaching at community colleges and Tribal colleges. These technologies magnify the effectiveness of problem solving in agriculture, disaster management, environmental sciences, urbanization monitoring, and multiple other domains for societal benefit. This session will demonstrate the approach and lessons learned by federal and private industry partners leading a professional development program, “Integrated Geospatial Education and Technology Training” (iGETT; http://igett.delmar.edu), 2007-2010. iGETT is funded by the National Science Foundation’s Advanced Technological Education Program, (NSF DUE 0703185). 40 participants were selected from a nationwide pool and received training in how to understand, identify, download, and integrate federal land remote sensing data into existing Geographic Information Systems programs to address specific issues of concern to the local workforce. Each participant has authored a “Learning Unit” that covers at least two weeks of class time. All training resources and Learning Units are publicly available on the iGETT Web site. A follow-on project is under consideration to develop core competencies for the remote sensing technician. Authors: Jeannie Allen, Sigma Space Corp. for NASA Landsat, at Goddard Space Flight Center; Ann Johnson, ESRI Higher Education; Rachel Headley, USGS EROS Land Remote Sensing Program

  9. Improving mine safety technology and training in the U.S. recommendations of the Mine Safety Technology and Training Commission

    Institute of Scientific and Technical Information of China (English)

    GRAYSON R. Larry

    2008-01-01

    The key issues studied focused on underground coal mining and included (1)prevention of explosions in sealed areas, (2) better emergency preparedness and re-sponse, (3) improvement of miners' ability to escape, (4) better protection of miners beforeand after a fire or explosion, (5) improved provision of oxygen, and (6) development andimplementation of more robust post-incident communication. The U.S. Congress passedthe Mine Improvement and New Emergency Response Act of 2006, which mandated newlaws to address the issues. Concurrent with investigations and congressional deliberations,the National Mining Association formed the independent Mine Safety Technology andTraining Commission to study the state-of-the-art relative to technology and training thatcould address the vulnerabilities exposed by the mine disasters. As discussed, the reportoutlined persistent vulnerabilities linked with significant hazards in underground coal mines,and made recommendations to provide a path for addressing them. Overall the commis-sion report made 75 recommendations in the areas of risk-based design and management,communications technology, emergency response and mine rescue procedures, trainingfor preparedness, and escape and protection strategies. In its deliberations, the commis-sion importantly noted that mine safety in the U.S. needs to follow a new paradigm for en-suring mine safety and developing a culture of prevention that supports safe production atthe business core. In the commission's viewpoint, the bottom line in protecting coal minersis not only adopting a culture of prevention but also systematically pursuing mitigation ofsignificant risks.

  10. Information Technology Training within Traineeships: Options for TAFE-Based Courses.

    Science.gov (United States)

    Hall, W.; And Others

    A study explored ways in which traineeship courses could be designed to include training in information technology. The skills and performance standards required of information technology training in the printing, tourism, banking, construction, and computer industries were identified. Next, the current provision of such training in Australia and…

  11. Application of RFID technology-upper extremity rehabilitation training.

    Science.gov (United States)

    Chen, Chih-Chen; Chen, Yu-Luen; Chen, Shih-Ching

    2016-01-01

    [Purpose] Upper extremity rehabilitation after an injury is very important. This study proposes radio frequency identification (RFID) technology to improve and enhance the effectiveness of the upper extremity rehabilitation. [Subjects and Methods] People use their upper extremities to conduct daily activities. When recovering from injuries, many patients neglect the importance of rehabilitation, which results in degraded function. This study recorded the training process using the traditional rehabilitation hand gliding cart with a RFID reader, RFID tags in the panel, and a servo host computer. [Results] Clinical evidence, time taken to achieve a full score, counts of missing the specified spots, and Brunnstrom stage of aided recovery, the proximal part of the upper extremity show that the RFID-based upper extremity training significantly and reduce negative impacts of the disability in daily life and activities. [Conclusion] This study combined a hand-gliding cart with an RFID reader, and when patients moved the cart, the movement could be observed via the activated RFID tags. The training data was collected and quantified for a better understanding of the recovery status of the patients. Each of the participating patients made progress as expected.

  12. Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

    Science.gov (United States)

    O'Neil, Dara

    2002-01-01

    Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

  13. Technological sequence of creating components of the training system of the future officers to the management of physical training

    Directory of Open Access Journals (Sweden)

    Olkhovy O.M.

    2012-09-01

    Full Text Available The goal is to determine constructive ways of sequence of constructing components of the training system of the future officers to carry out official questions of managing the physical training in the process of the further military career. The structural logic circuit of the interconnections stages of optimum cycle management and technological sequence of constructing the components of the training system of the future officers to the management of physical training, which provides: definition of requirements to the typical problems of professional activities on the issues of the leadership, organization and conducting of physical training, the creation of the phased system model cadets training, training of the curriculum discipline ″Physical education, special physical training and sport″; model creation and definition of criteria of the integral evaluation of the readiness of the future officers to the management of physical training was determined through the analysis more than thirty documentary and scientific literature.

  14. A Broadly-Based Training Program in Volcano Hazards Monitoring at the Center for the Study of Active Volcanoes

    Science.gov (United States)

    Thomas, D. M.; Bevens, D.

    2015-12-01

    The Center for the Study of Active Volcanoes, in cooperation with the USGS Volcano Hazards Program at HVO and CVO, offers a broadly based volcano hazards training program targeted toward scientists and technicians from developing nations. The program has been offered for 25 years and provides a hands-on introduction to a broad suite of volcano monitoring techniques, rather than detailed training with just one. The course content has evolved over the life of the program as the needs of the trainees have changed: initially emphasizing very basic monitoring techniques (e.g. precise leveling, interpretation of seismic drum records, etc.) but, as the level of sophistication of the trainees has increased, training in more advanced technologies has been added. Currently, topics of primary emphasis have included volcano seismology and seismic networks; acquisition and modeling of geodetic data; methods of analysis and monitoring of gas geochemistry; interpretation of volcanic deposits and landforms; training in LAHARZ, GIS mapping of lahar risks; and response to and management of volcanic crises. The course also provides training on public outreach, based on CSAV's Hawaii-specific hazards outreach programs, and volcano preparedness and interactions with the media during volcanic crises. It is an intensive eight week course with instruction and field activities underway 6 days per week; it is now offered in two locations, Hawaii Island, for six weeks, and the Cascades volcanoes of the Pacific Northwest, for two weeks, to enable trainees to experience field conditions in both basaltic and continental volcanic environments. The survival of the program for more than two decades demonstrates that a need for such training exists and there has been interaction and contribution to the program by the research community, however broader engagement with the latter continues to present challenges. Some of the reasons for this will be discussed.

  15. Factors Influencing the Acceptance of Web-Based Training in Malaysia: Applying the Technology Acceptance Model

    Science.gov (United States)

    Hashim, Junaidah

    2008-01-01

    Companies in Malaysia are beginning to use web-based training to reduce the cost of training and to provide employees with greater access to instruction. However, some people are uncomfortable with technology and prefer person-to-person methods of training. This study examines the acceptance of web-based training among a convenience sample of 261…

  16. Factors Influencing the Acceptance of Web-Based Training in Malaysia: Applying the Technology Acceptance Model

    Science.gov (United States)

    Hashim, Junaidah

    2008-01-01

    Companies in Malaysia are beginning to use web-based training to reduce the cost of training and to provide employees with greater access to instruction. However, some people are uncomfortable with technology and prefer person-to-person methods of training. This study examines the acceptance of web-based training among a convenience sample of 261…

  17. Graduate Automotive Technology Education (GATE) Program: Center of Automotive Technology Excellence in Advanced Hybrid Vehicle Technology at West Virginia University

    Energy Technology Data Exchange (ETDEWEB)

    Nigle N. Clark

    2006-12-31

    This report summarizes the technical and educational achievements of the Graduate Automotive Technology Education (GATE) Center at West Virginia University (WVU), which was created to emphasize Advanced Hybrid Vehicle Technology. The Center has supported the graduate studies of 17 students in the Department of Mechanical and Aerospace Engineering and the Lane Department of Computer Science and Electrical Engineering. These students have addressed topics such as hybrid modeling, construction of a hybrid sport utility vehicle (in conjunction with the FutureTruck program), a MEMS-based sensor, on-board data acquisition for hybrid design optimization, linear engine design and engine emissions. Courses have been developed in Hybrid Vehicle Design, Mobile Source Powerplants, Advanced Vehicle Propulsion, Power Electronics for Automotive Applications and Sensors for Automotive Applications, and have been responsible for 396 hours of graduate student coursework. The GATE program also enhanced the WVU participation in the U.S. Department of Energy Student Design Competitions, in particular FutureTruck and Challenge X. The GATE support for hybrid vehicle technology enhanced understanding of hybrid vehicle design and testing at WVU and encouraged the development of a research agenda in heavy-duty hybrid vehicles. As a result, WVU has now completed three programs in hybrid transit bus emissions characterization, and WVU faculty are leading the Transportation Research Board effort to define life cycle costs for hybrid transit buses. Research and enrollment records show that approximately 100 graduate students have benefited substantially from the hybrid vehicle GATE program at WVU.

  18. The Partnership for Today That Works for Tomorrow: The Professional Automotive Training Center at Shoreline Community College.

    Science.gov (United States)

    Hightower, Cameron

    The Professional Automotive Training Center (PATC) is a 28,150 square foot automotive technician training center located on the campus of Shoreline Community College (SCC) in Washington. The complex is the result of a partnership between SCC and the 230 automotive dealerships of the Puget Sound Automotive Dealers Association and is designed to…

  19. Educational Technology Training Workshops for Mathematics Teachers: An Exploration of Perception Changes

    Science.gov (United States)

    Lau, Wilfred Wing Fat; Yuen, Allan Hoi Kau

    2013-01-01

    This study examined the effects of educational technology training workshops on perception changes of mathematics teachers. Three perceptions, namely, pedagogical orientation, efficacy, and liking in relation to technology integration, were explored in this study. Two research questions were addressed: Do educational technology training workshops…

  20. Technological aspects of teacher training in culture of information products criation in further education system

    OpenAIRE

    Кондратьева, И. П.

    2013-01-01

    Submission is devoted to urgent educational problem of teacher training in culture of information products criation. Theses include the concept of the culture, describe the educational technology stages of teacher training in further education system.

  1. A new concept for medical imaging centered on cellular phone technology.

    Directory of Open Access Journals (Sweden)

    Yair Granot

    Full Text Available According to World Health Organization reports, some three quarters of the world population does not have access to medical imaging. In addition, in developing countries over 50% of medical equipment that is available is not being used because it is too sophisticated or in disrepair or because the health personnel are not trained to use it. The goal of this study is to introduce and demonstrate the feasibility of a new concept in medical imaging that is centered on cellular phone technology and which may provide a solution to medical imaging in underserved areas. The new system replaces the conventional stand-alone medical imaging device with a new medical imaging system made of two independent components connected through cellular phone technology. The independent units are: a a data acquisition device (DAD at a remote patient site that is simple, with limited controls and no image display capability and b an advanced image reconstruction and hardware control multiserver unit at a central site. The cellular phone technology transmits unprocessed raw data from the patient site DAD and receives and displays the processed image from the central site. (This is different from conventional telemedicine where the image reconstruction and control is at the patient site and telecommunication is used to transmit processed images from the patient site. The primary goal of this study is to demonstrate that the cellular phone technology can function in the proposed mode. The feasibility of the concept is demonstrated using a new frequency division multiplexing electrical impedance tomography system, which we have developed for dynamic medical imaging, as the medical imaging modality. The system is used to image through a cellular phone a simulation of breast cancer tumors in a medical imaging diagnostic mode and to image minimally invasive tissue ablation with irreversible electroporation in a medical imaging interventional mode.

  2. A new concept for medical imaging centered on cellular phone technology.

    Science.gov (United States)

    Granot, Yair; Ivorra, Antoni; Rubinsky, Boris

    2008-04-30

    According to World Health Organization reports, some three quarters of the world population does not have access to medical imaging. In addition, in developing countries over 50% of medical equipment that is available is not being used because it is too sophisticated or in disrepair or because the health personnel are not trained to use it. The goal of this study is to introduce and demonstrate the feasibility of a new concept in medical imaging that is centered on cellular phone technology and which may provide a solution to medical imaging in underserved areas. The new system replaces the conventional stand-alone medical imaging device with a new medical imaging system made of two independent components connected through cellular phone technology. The independent units are: a) a data acquisition device (DAD) at a remote patient site that is simple, with limited controls and no image display capability and b) an advanced image reconstruction and hardware control multiserver unit at a central site. The cellular phone technology transmits unprocessed raw data from the patient site DAD and receives and displays the processed image from the central site. (This is different from conventional telemedicine where the image reconstruction and control is at the patient site and telecommunication is used to transmit processed images from the patient site). The primary goal of this study is to demonstrate that the cellular phone technology can function in the proposed mode. The feasibility of the concept is demonstrated using a new frequency division multiplexing electrical impedance tomography system, which we have developed for dynamic medical imaging, as the medical imaging modality. The system is used to image through a cellular phone a simulation of breast cancer tumors in a medical imaging diagnostic mode and to image minimally invasive tissue ablation with irreversible electroporation in a medical imaging interventional mode.

  3. Anything But: Joint Air-Ground Training at the U.S. Army Ground Combat Training Centers

    Science.gov (United States)

    2009-04-03

    Antis, COL Jim Dickens , and COL (Ret) Tom Snukis. If I ever become a “world class” planner, it will be a direct result of their hard work and patience...enjoyed at the National Training Center, created the Joint 89 Burge 2009. 90 Wolf, 413. 91 Wickham, GEN John A., USA, and Gen Charles A. Gabriel...part of the US Army’s rapid advance to Baghdad, that V Corps Historian Dr. Charles E. Kirkpatrick, described the effort as an “almost flawless

  4. Technical Training Seminar: Laser Trackers: the Local Positioning Technology (LPT)

    CERN Multimedia

    Davide Vitè

    2005-01-01

    Friday 20 May from 10:00 to 16:00, Training Centre (bldg. 593) Laser Trackers: the Local Positioning Technology (LPT) Simon Moser, Michael Lettau, Achim Lupus, Niklaus Suter, Leica GEOSYSTEMS AG, Switzerland Laser trackers are used at CERN for different applications within the LHC Project. Leica Geosystems AG have been developing during the last four years the revolutionary Local Positioning Technology (LPT). Laser trackers are increasingly used to ensure accuracy of large fabrications, and alignment in the final assembly process. Competing portable Coordinate Measuring Machines (CMM) with articulated arms require a frequent repositioning, known to lead to a loss of accuracy and efficiency. Leica Geosystems developed armless solutions, the T-Probe and T-Scan, for use with its laser trackers. The combination of the tracker technology with photogrammetry is the base of LPT, enabling real time measurements with free hand-held devices, such as the T-Probe and T-Scan. T-Probe and T-Scan overcome the proble...

  5. Vertical flight training: An overview of training and flight simulator technology with emphasis on rotary-wing requirements

    Science.gov (United States)

    Alderete, Thomas S.; Ascencio-Lee, Carmen E.; Bray, Richard; Carlton, John; Dohme, Jack; Eshow, Michelle M.; Francis, Stephen; Lee, Owen M.; Lintern, Gavan; Lombardo, David A.

    1994-01-01

    The principal purpose of this publication is to provide a broad overview of the technology that is relevant to the design of aviation training systems and of the techniques applicable to the development, use, and evaluation of those systems. The issues addressed in our 11 chapters are, for the most part, those that would be expected to surface in any informed discussion of the major characterizing elements of aviation training systems. Indeed, many of the same facets of vertical-flight training discussed were recognized and, to some extent, dealt with at the 1991 NASA/FAA Helicopter Simulator Workshop. These generic topics are essential to a sound understanding of training and training systems, and they quite properly form the basis of any attempt to systematize the development and evaluation of more effective, more efficient, more productive, and more economical approaches to aircrew training. Individual chapters address the following topics: an overview of the vertical flight industry: the source of training requirements; training and training schools: meeting current requirements; training systems design and development; transfer of training and cost-effectiveness; the military quest for flight training effectiveness; alternative training systems; training device manufacturing; simulator aero model implementation; simulation validation in the frequency domain; cockpit motion in helicopter simulation; and visual space perception in flight simulators.

  6. The Center for Research and Evaluation in the Application of Technology to Education.

    Science.gov (United States)

    Rubin, David P.; Weisgerber, Robert A.

    1985-01-01

    The Center for Research and Development in the Application of Technology to Education project identifies effective uses of new technologies for the learning disabled. Areas investigated include effective instructional design principles, program design strategies, adjusting technology for individual learners, software development, and use of…

  7. Extension of Small-Scale Postharvest Horticulture Technologies—A Model Training and Services Center

    Directory of Open Access Journals (Sweden)

    Lisa Kitinoja

    2015-07-01

    Full Text Available A pilot Postharvest Training and Services Center (PTSC was launched in October 2012 in Arusha, Tanzania as part of a United States Agency for International Development (USAID funded project. The five key components of the PTSC are (1 training of postharvest trainers, (2 postharvest training and demonstrations for local small-scale clientele, (3 adaptive research, (4 postharvest services, and (5 retail sales of postharvest tools and supplies. During the years of 2011–2012, a one year e-learning program was provided to 36 young horticultural professionals from seven Sub-Saharan African countries. These postharvest specialists went on to train more than 13,000 local farmers, extension workers, food processors, and marketers in their home countries in the year following completion of their course. Evaluators found that these specialists had trained an additional 9300 people by November 2014. When asked about adoption by their local trainees, 79% reported examples of their trainees using improved postharvest practices. From 2012–2013, the project supported 30 multi-day training programs, and the evaluation found that many of the improved practices being promoted were adopted by the trainees and led to increased earnings. Three PTSC components still require attention. Research activities initiated during the project are incomplete, and successful sales of postharvest goods and services will require commitment and improved partnering.

  8. Training for life science experiments in space at the NASA Ames Research Center

    Science.gov (United States)

    Rodrigues, Annette T.; Maese, A. Christopher

    1993-01-01

    As this country prepares for exploration to other planets, the need to understand the affects of long duration exposure to microgravity is evident. The National Aeronautics and Space Administration (NASA) Ames Research Center's Space Life Sciences Payloads Office is responsible for a number of non-human life sciences payloads on NASA's Space Shuttle's Spacelab. Included in this responsibility is the training of those individuals who will be conducting the experiments during flight, the astronauts. Preparing a crew to conduct such experiments requires training protocols that build on simple tasks. Once a defined degree of performance proficiency is met for each task, these tasks are combined to increase the complexity of the activities. As tasks are combined into in-flight operations, they are subjected to time constraints and the crew enhances their skills through repetition. The science objectives must be completely understood by the crew and are critical to the overall training program. Completion of the in-flight activities is proof of success. Because the crew is exposed to the background of early research and plans for post-flight analyses, they have a vested interest in the flight activities. The salient features of this training approach is that it allows for flexibility in implementation, consideration of individual differences, and a greater ability to retain experiment information. This training approach offers another effective alternative training tool to existing methodologies.

  9. Installation restoration program. Surveillance and oversight of remedial actions at site 2 and site 4. Completion report for Alpena Combat Readiness Training Center, Alpena Michigan. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    This report documents remediation activities through completion at Site 2 and Site 4 of the Alpena Combat Readiness Training Center (CRTC) in Alpena, Michigan (Figure 1). Contaminated soils were remediated from May 1995 through August 1995 using a combination of stabilization, in-situ bioremediation, and ex-situ bioremediation technologies. Remediation activities were completed by Unico Construction Co., Inc. (the general contractor) and CCC Group, Inc. (a subcontractor) both of San Antonio, Texas. Remediation activities included.

  10. CERN Technical Training 2006: Software and System Technologies Curriculum - Scheduled

    CERN Multimedia

    2006-01-01

    Course Sessions (October 2006-March 2007) The Software and System Technologies Curriculum of the CERN Technical Training Programme offers comprehensive training in C++, Java, Perl, Python, XML, OO programming, JCOP/PVSS, database design and Oracle. In the PERL, C++, OO and Java course series there are some places available on the following course sessions, currently scheduled until March 2007: Object-Oriented Analysis and Design using UML: 17-19 October 2006 (3 days) JAVA 2 Enterprise Edition - Part 1: Web Applications: 19-20 October 2006 (2 days) JAVA - Level 1: 30 October -1 November 2006 (3 days) PERL 5 - Advanced Aspects: 2 November 2006 (1 day) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming: 14-16 November 2006 (3 days) JAVA - Level 2: 4-7 December 2006 (4 days) C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls: 12-15 December 2006 (4 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 18-20 December 2006 (3 days) C++ for Particle Physicists:...

  11. Renal Cancer Biomarkers | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's Laboratory of Proteomics and Analytical Technologies is seeking statements of capability or interest from parties interested in collaborative research to further develop, evaluate, or commercialize diagnostic, therapeutic and prognostic cancer biomarkers from clinical specimens.

  12. EVALUATION PROGRAM OF REGIONAL TRAINING CENTER (PELATDA) PON XIX SOUTH SULAWESI

    OpenAIRE

    Sahabuddin, Sahabuddin

    2017-01-01

    AbstractThe objective of this research is to evaluate Program Regional Training Center (PELATDA) PON XIX South Sulawesi. This is a qualitative and quantitative research with evaluation approach using Context, Input, Process, and Product (CIPP) model. Methods of collecting data in triangulation using questionnaires, interviews, document studies and observation. The result shows that: (1) Context Evaluation: having strong government policies, objectives and targets are well manifested, with an ...

  13. [Significance of Multi-center Obstetrics Perioperative Team Training Including Various Medical Staffs].

    Science.gov (United States)

    Komasawa, Nobuyasu; Fujita, Daisuke; Nakayama, Mai; Fujiwara, Shunsuke; Mihara, Ryosuke; Okada, Daisuke; Omoto, Haruka; Tanaka, Motoshige; Nishihara, Isao; Minami, Toshiaki

    2016-02-01

    We report the development of a multi-center/multispecialist obstetrics perioperative team training program. Participants were members of the team, including anesthesiologists, obstetricians, and operation nurses. A questionnaire survey was conducted prior to course participation to clarify any questions team members had. The courses included a lecture and simulation training with scenario-based discussions or the use of a simulator. Scenarios included massive bleeding during cesarean section, massive bleeding after vaginal delivery, and emergency cesarean section for premature placental abruption. After each course, participants discussed problems associated with obstetrics medical safety in the context of each theme. Simulation-based perioperative team training with anesthesiologists, obstetricians, and operation nurses may serve as a vehicle to promote perioperative obstetrics patient safety.

  14. Staffing and Training Requirements for Tumor Registry Centers in the State of Louisiana. Technical Report 69-101.

    Science.gov (United States)

    Fink, C. Dennis

    An exploratory study was conducted to obtain information regarding staff requirements in small tumor registry centers, involving a brief analysis of existing tumor registry centers and exploration of training and organizational factors that might be associated with establishing new centers. Activities performed by tumor registry personnel were…

  15. Perceived Impacts of a Public Health Training Center Field Placement Program Among Trainees

    Directory of Open Access Journals (Sweden)

    Patrik eJohansson

    2014-07-01

    Full Text Available There is heightened interest in identifying the impact of the federally-funded Public Health Training Center (PHTC program. Although evaluation studies have been conducted of public health training in general, evaluations of PHTC programs are rare. Field placement components are Congressionally-mandated requirements of PHTCs. Field placements are typically intensive, supervised externships for students to gain public health experience with local health departments or non-profit organizations. We have found no published evaluations of PHTC field placement components. This may be because of their small size and unique nature. We designed and evaluated a 200-hour field placement program at an established Public Health Training Center. The evaluation included pre/post surveys measuring public health core competencies, and post-experience interviews. We found significant increases in three competency domains among trainees: policy development and program planning, communication skills, and community dimensions of practice. These outcomes contribute to an evidence base on the efficacy of PHTC field placement programs, and underscore their role in public health training.

  16. Information for Our Partners | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    NCI TTC CRADA PAYMENT OPTIONS: Electronic Payments by Wire Transfer via Fedwire, Mail a check to the Institute or Center, or Automated Clearing House (ACH)/Electronic Funds Transfer (ETF) payments via Pay.gov (NCI ONLY). | [google6f4cd5334ac394ab.html

  17. Research Funding, Patent Search Training and Technology Transfer: a collaboration

    KAUST Repository

    Tyhurst, Janis

    2016-01-01

    This paper will focus on the collaboration efforts of three different university departments to create, teach and evaluate the benefits of a joint patent training series, as well as the future directions this collaboration will take. KAUST has as one of its goals the diversification of the Saudi economy. There is a strong focus at the university on developing entrepreneurial ideas and commercializing research done. The University Library supports this goal through the provision of electronic resources and introductory patent search training skills. However, the patent training class offered by the University Library is only one step in a process that faculty and students need when starting or taking their research to the next level. In the Fall of 2015, I met with representatives of the two major stakeholders in the patent arena, the office of Sponsored Research (OSR) and the Technology Transfer Office (TTO), to develop a patent training program to meet the needs of researchers. The OSR provides funding to researchers who have demonstrated that their ideas have merit with potential applications, the TTO works with researchers who are at the point of needing IP protection. The resulting discussion led us to collaborate on creating a workshop series that benefit the researcher’s information needs and each of our departments as well. In the first of the series of three 2 hour workshops, the Manager of TTO and the Lead Integrative Specialist from the OSR presented a workshop on an overview of Intellectual Property and the patenting process. These presentations focused on when and how to determine whether research is potentially patentable, why a researcher needs to protect his/her research and how to go about protecting it. The second workshop focused on introductory patent search skills and tools, how to expand a literature search to include the information found in patents, and how this kind of research will improve not only the literature search but the research

  18. Marshall Space Flight Center Research and Technology Report 2015

    Science.gov (United States)

    Keys, A. S. (Compiler); Tinker, M. L. (Compiler); Sivak, A. D. (Compiler); Morris, H. C. (Compiler)

    2015-01-01

    The investments in technology development we made in 2015 not only support the Agency's current missions, but they will also enable new missions. Some of these projects will allow us to develop an in-space architecture for human space exploration; Marshall employees are developing and testing cutting-edge propulsion solutions that will propel humans in-space and land them on Mars. Others are working on technologies that could support a deep space habitat, which will be critical to enable humans to live and work in deep space and on other worlds. Still others are maturing technologies that will help new scientific instruments study the outer edge of the universe-instruments that will provide valuable information as we seek to explore the outer planets and search for life.

  19. Environmental effects of fog oil and CS usage at the Combat Maneuver Training Center, Hohenfels, Germany

    Energy Technology Data Exchange (ETDEWEB)

    Brubaker, K.L.; Rosenblatt, D.H.; Snyder, C.T.

    1992-03-01

    In response to environmental concerns at the Combat Maneuver Training Center (CMTC), Hohenfels, Germany, the US Army 7th Army Training Command commissioned a scientific study by Argonne National Laboratory to investigate specific issues. The study involved three parts: (1) a field study to determine if fog oil and CS (a compound named after its discoverers, B.B. Carson and R.W. Stoughton) were accumulating in the CMTC environment, (2) a screening of selected soil samples for the presence of US Environmental Protection Agency priority pollutants, and (3) a literature review of the health effects of fog oil and CS, as well as a review of training practices at CMTC. No fog oil or fog oil degradation products were detected in any soil, sediment, or vegetation sample collected at CMTC. Trace quantities of one or more priority pollutants were tentatively detected in three of eight soil and sediment samples. However, the priority pollutant concentrations are so low that they pose no environmental or health hazards. No evidence of widespread or significant contamination in the training areas was found. Crucial data needed to fully evaluate both acute and chronic health effects of civilian exposures to CS at CMTC are not available. On the basis of the available literature, long-ten-n health effects in the civilian population near CMTC that could result from the use of fog oil and CS during training activities are believed to be negligible.

  20. The Employee Invention Report (EIR) | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    After making a unique, non-obvious, and useful discovery, NIH researchers must immediately contact their Laboratory or Branch Chief and inform him or her of a possible invention, and then consult with your NCI TTC Technology Transfer Manager about submitting an Employee Invention Report (EIR) Form. | [google6f4cd5334ac394ab.html

  1. Managing Information Technology in Academic Medical Centers: A "Multicultural" Experience.

    Science.gov (United States)

    Friedman, Charles P.; Corn, Milton; Krumrey, Arthur; Perry, David R.; Stevens, Ronald H.

    1998-01-01

    Examines how beliefs and concerns of academic medicine's diverse professional cultures affect management of information technology. Two scenarios, one dealing with standardization of desktop personal computers and the other with publication of syllabi on an institutional intranet, form the basis for an exercise in which four prototypical members…

  2. Water Reclamation Technology Development at Johnson Space Center

    Science.gov (United States)

    Callahan, Michael R.; Pickering, Karen

    2014-01-01

    Who We Are: A staff of approximately 14 BS, MS, and PhD-Level Engineers and Scientists with experience in Aerospace, Civil, Environmental, and Mechanical Engineering, Chemistry, Physical Science and Water Pollution Microbiology. Our Primary Objective: To develop the next generation water recovery system technologies that will support NASA's long duration missions beyond low-earth orbit.

  3. Mouse Xenograft Model for Mesothelioma | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute is seeking parties interested in collaborative research to co-develop, evaluate, or commercialize a new mouse model for monoclonal antibodies and immunoconjugates that target malignant mesotheliomas. Applications of the technology include models for screening compounds as potential therapeutics for mesothelioma and for studying the pathology of mesothelioma.

  4. Co-Development Agreements | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's TTC uses three different co-development agreements to help industry and academia interact and partner with National Institutes of Health laboratories and scientists to support technology development activities. | [google6f4cd5334ac394ab.html

  5. Project of space research and technology center in Engelhardt astronomical observatory

    Science.gov (United States)

    Nefedyev, Y.; Gusev, A.; Sherstukov, O.; Kascheev, R.; Zagretdinov, R.

    2012-09-01

    Today on the basis of Engelhardt astronomical observatory (EAO) is created Space research and technology center as consistent with Program for expansion of the Kazan University. The Centre has the following missions: • EDUCATION • SCIENCE • ASTRONOMICAL TOURISM

  6. National Fuel Cell Technology Evaluation Center (NFCTEC); (NREL) National Renewable Energy Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Jennifer; Sprik, Sam

    2014-03-11

    This presentation gives an overview of the National Fuel Cell Technology Evaluation Center (NFCTEC), describes how NFCTEC benefits the hydrogen and fuel cell community, and introduces a new fuel cell cost/price aggregation project.

  7. Chinese Telephone Number-Input Technology and Its Applications in a Customer Service Call Center

    Institute of Scientific and Technical Information of China (English)

    罗仁; 许晓革; 兰德品; 郭盛芳

    2002-01-01

    The Chinese intelligence input technology, its applications, and a customer serv ice call center system are developed. This technology can be used both in stan dard English telephone number-input keyboard and in Chinese telephone number- input keyboard .And authors develop sophisticated technologies including "Pinyi n" (the Chinese p honetic alphabet ) encoding technology of phonetic symbol code and formal symbo l code of Chinese character structure, phrase encoding technology, input technol ogy of whole sentence intelligence encoding and input technology of Chinese tele phone number encoding.

  8. Multi-center randomized controlled trial of cognitive treatment, placebo, oxybutynin, bladder training, and pelvic floor training in children with functional urinary incontinence

    NARCIS (Netherlands)

    van Gool, Jan D.; de Jong, Tom P. V. M.; Winkler-Seinstra, Pauline; Tamminen-Moebius, Tytti; Lax, Hildegard; Hirche, Herbert; Nijman, Rien J. M.; Hjalmas, Kelm; Jodal, Ulf; Bachmann, Hannsjoerg; Hoebeke, Piet; Vande Walle, Johan; Misselwitz, Joachim; John, Ulrike; Bael, An

    Objective Functional urinary incontinence causes considerable morbidity in 8.4% of school-age children, mainly girls. To compare oxybutynin, placebo, and bladder training in overactive bladder (OAB), and cognitive treatment and pelvic floor training in dysfunctional voiding (DV), a multi-center

  9. 76 FR 39811 - International Center for Technology Assessment and the Center for Food Safety; Noxious Weed...

    Science.gov (United States)

    2011-07-07

    ... Assessment and the Center for Food Safety; Noxious Weed Status of Kentucky Bluegrass Genetically Engineered... engineered for tolerance to the herbicide glyphosate should not be listed as a Federal noxious weed and... noxious weeds. Our decision is based on our analysis of available scientific data, our weed risk...

  10. Balance training and center-of-pressure location in participants with chronic ankle instability.

    Science.gov (United States)

    Mettler, Abby; Chinn, Lisa; Saliba, Susan A; McKeon, Patrick O; Hertel, Jay

    2015-04-01

    Chronic ankle instability (CAI) occurs in some people after a lateral ankle sprain and often results in residual feelings of instability and episodes of the ankle's giving way. Compared with healthy people, patients with CAI demonstrated poor postural control and used a more anteriorly and laterally positioned center of pressure (COP) during a single-limb static-balance task on a force plate. Balance training is an effective means of altering traditional COP measures; however, whether the overall location of the COP distribution under the foot also changes is unknown. To determine if the spatial locations of COP data points in participants with CAI change after a 4-week balance-training program. Randomized controlled trial. Laboratory. Thirty-one persons with self-reported CAI. Participants were randomly assigned to a 4-week balance-training program or no balance training. We collected a total of 500 COP data points while participants balanced using a single limb on a force plate during a 10-second trial. The location of each COP data point relative to the geometric center of the foot was determined, and the frequency count in 4 sections (anteromedial, anterolateral, posteromedial, posterolateral) was analyzed for differences between groups. Overall, COP position in the balance-training group shifted from being more anterior to less anterior in both eyes-open trials (before trial = 319.1 ± 165.4, after trial = 160.5 ± 149.5; P = .006) and eyes-closed trials (before trial = 387.9 ± 123.8, after trial = 189.4 ± 102.9; P location from anterolateral to posterolateral. The program may have repaired some of the damaged sensorimotor system pathways, resulting in a more optimally functioning and less constrained system.

  11. The Effects of Music Teacher Beliefs, Training, and Resources on Use of Technology

    Science.gov (United States)

    Sorah, Donald Wayne, Jr.

    2012-01-01

    The purpose of this study was to compare teacher beliefs about music technology, types of teacher training in music technology, music technology resource availability, and levels of teacher use of music technology based on school socioeconomic status, teacher age, number of years teaching, and teacher gender. High-school band directors from the…

  12. The Effects of Music Teacher Beliefs, Training, and Resources on Use of Technology

    Science.gov (United States)

    Sorah, Donald Wayne, Jr.

    2012-01-01

    The purpose of this study was to compare teacher beliefs about music technology, types of teacher training in music technology, music technology resource availability, and levels of teacher use of music technology based on school socioeconomic status, teacher age, number of years teaching, and teacher gender. High-school band directors from the…

  13. BEHAVIOUR OF STONE FACADES IN URBAN CENTERS INNOVATIVE BUILDING TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Antonio Monaco

    1990-12-01

    Full Text Available An innovative technology using stone and granite as exterior sheeting of modern steel and concrete tall buildings is presented, Granites are chosen for the indubitable superior durability in any wheather and polluted atmosfere condition. But to guarantee durability stone sheets have to be mounted in such a way as to avoid any inner irregular stress. In particular stresses from deformation of the main structure must not be trasmitted to the exterior sheeting. Moreover an all-proof wheather barrier has to be incorporated in the factory builded sheeting panel. The innovative technology allowing use of granite and stone in facing of tall buildings is here presented along with two very important realisations: The North Tower in Genoa and the Canary Wharf in London.

  14. Center for Integration of Medicine and Innovative Technology

    Science.gov (United States)

    2007-11-01

    anastomoses sites. This completes this project. Minimally Invasive Surgery - Craniofacial Surgery Planning – Leonard Kaban, MD, MGH The CIMIT...illness. These developing technologies lessen: the time required for recovery, the pain and suffering associated with therapy, and the overall...The engineering of craniofacial tissues in the laboratory: a review of biomaterials for scaffolds and implant coatings. Dent Clin North Am. 2006;50

  15. Joint research center activity in thermonuclear fusion technology

    Energy Technology Data Exchange (ETDEWEB)

    Casini, G.; Rocco, P. (Commission of the European Communities, Ispra (Italy). Joint Research Centre)

    1984-04-01

    A review of the activities in progress in the field of thermonuclear fusion technology at the Joint Research Centre of the European Communities is presented. The research areas are: (I) reactor studies, including conceptual design studies of experimental Tokamak reactors (INTOR/NET) and safety analyses; (II) experimental investigation on first wall and blanket materials and components. Emphasis has been given to those topics which are not reported in detail in the following articles of the issue.

  16. Hypermedia Laboratory, Defense Applied Information Technology Center; Review for 1988

    Science.gov (United States)

    1988-12-01

    des images. La proliferation des reseatix publics et prives et des services de messagerie oti courrier electronique utilisant de larges bandes et des...technologies tres fiables permer de transporter du texte integral et de proceder a des transferts eLectroniques de documents la oti pour l’instant on...des reseaux de coumrer electronique (comme Infotap et Geomail), et des possibilites de transferts rapides entre collections archivees sur disques et

  17. Technology-Based Biliteracy Centers for the 21st Century Learner

    Science.gov (United States)

    Mercuri, Sandra; Ramos, Laura

    2014-01-01

    The purpose of this reflective article is to present an alternative that incorporates the four language skills in all content areas through technology-based dual-language centers for emergent bilinguals at the elementary level. The authors propose a matrix to plan the centers and include three examples to facilitate language transfer in English…

  18. Between Technological Endorsement and Resistance: The State of Online Writing Centers

    Science.gov (United States)

    Neaderhiser, Stephen; Wolfe, Joanna

    2009-01-01

    Over the past two decades, writing centers have steadily been expanding services and materials they offer online. The way students write and communicate about their writing continues to change, and the writing center has increasingly been looked upon as a site through which technology and writing have the ability to converge in the form of…

  19. Personalized Integrated Educational System: Technology Functions for the Learner- Centered Paradigm of Education

    Science.gov (United States)

    Reigeluth, Charles M.; Aslan, Sinem; Chen, Zengguan; Dutta, Pratima; Huh, Yeol; Lee, Dabae; Lin, Chun-Yi; Lu, Ya-Huei; Min, Mina; Tan, Verily; Watson, Sunnie Lee; Watson, William R.

    2015-01-01

    The learner-centered paradigm of instruction differs in such fundamental ways from the teacher-centered paradigm that it requires technology to serve very different functions. In 2006, a research team at Indiana University began to work on identifying those functions and published their results in 2008. Subsequently, the team elaborated and…

  20. The Efficiency and Effectiveness of the K-12 Energy Technology Education Promotion Centers in Taiwan

    Science.gov (United States)

    Lee, Lung-Sheng

    2013-01-01

    In order to promote energy literacy for graders K-12, the Ministry of Education (MOE) in Taiwan initiated a K-12 Energy Technology Education Project in September 2010. This 40-month project has one project office affiliated to a university, and 18 promotion centers affiliated to 18 schools--including 5 regional centers for upper-secondary schools…

  1. 78 FR 65300 - Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center...

    Science.gov (United States)

    2013-10-31

    ...: Federal Docket Management System Office, 4800 Mark Center Drive, East Tower, 2nd floor, Suite 02G09... of the Secretary Notice of Availability (NOA) for General Purpose Warehouse and Information... Purpose Warehouse and Information Technology Center at Defense Distribution Depot San Joaquin,...

  2. The Use of Information Technology in Training Human Resources: An E-Learning Case Study

    Science.gov (United States)

    Gasco, Jose L.; Llopis, Juan; Gonzalez, M. Reyes

    2004-01-01

    This paper addresses the influence of information technology in human resources management (HRM) and specifically on training policy through the experience of a Spanish telecommunications firm, "Telefonica". The characteristics of the training model designed by this firm to face new environments is considered and the technologies used, the key…

  3. The Use of Information Technology in Training Human Resources: An E-Learning Case Study

    Science.gov (United States)

    Gasco, Jose L.; Llopis, Juan; Gonzalez, M. Reyes

    2004-01-01

    This paper addresses the influence of information technology in human resources management (HRM) and specifically on training policy through the experience of a Spanish telecommunications firm, "Telefonica". The characteristics of the training model designed by this firm to face new environments is considered and the technologies used,…

  4. Review on the Traction System Sensor Technology of a Rail Transit Train.

    Science.gov (United States)

    Feng, Jianghua; Xu, Junfeng; Liao, Wu; Liu, Yong

    2017-06-11

    The development of high-speed intelligent rail transit has increased the number of sensors applied on trains. These play an important role in train state control and monitoring. These sensors generally work in a severe environment, so the key problem for sensor data acquisition is to ensure data accuracy and reliability. In this paper, we follow the sequence of sensor signal flow, present sensor signal sensing technology, sensor data acquisition, and processing technology, as well as sensor fault diagnosis technology based on the voltage, current, speed, and temperature sensors which are commonly used in train traction systems. Finally, intelligent sensors and future research directions of rail transit train sensors are discussed.

  5. CD-ROM technology at the EROS data center

    Science.gov (United States)

    Madigan, Michael E.; Weinheimer, Mary C.

    1993-01-01

    The vast amount of digital spatial data often required by a single user has created a demand for media alternatives to 1/2" magnetic tape. One such medium that has been recently adopted at the U.S. Geological Survey's EROS Data Center is the compact disc (CD). CD's are a versatile, dynamic, and low-cost method for providing a variety of data on a single media device and are compatible with various computer platforms. CD drives are available for personal computers, UNIX workstations, and mainframe systems, either directly connected, or through a network. This medium furnishes a quick method of reproducing and distributing large amounts of data on a single CD. Several data sets are already available on CD's, including collections of historical Landsat multispectral scanner data and biweekly composites of Advanced Very High Resolution Radiometer data for the conterminous United States. The EROS Data Center intends to provide even more data sets on CD's. Plans include specific data sets on a customized disc to fulfill individual requests, and mass production of unique data sets for large-scale distribution. Requests for a single compact disc-read only memory (CD-ROM) containing a large volume of data either for archiving or for one-time distribution can be addressed with a CD-write once (CD-WO) unit. Mass production and large-scale distribution will require CD-ROM replication and mastering.

  6. Renewable Energy SCADA/Training Using NASA's Advanced Technology Communication Satellite

    Science.gov (United States)

    Kalu, A.; Emrich, C.; Ventre, G.; Wilson, W.; Acosta, Roberto (Technical Monitor)

    2000-01-01

    The lack of electrical energy in the rural communities of developing countries is well known, as is the economic unfeasibility of providing much needed energy to these regions via electric grids. Renewable energy (RE) can provide an economic advantage over conventional forms in meeting some of these energy needs. The use of a Supervisory Control and Data Acquisition (SCADA) arrangement via satellite could enable experts at remote locations to provide technical assistance to local trainees while they acquire a measure of proficiency with a newly installed RE system through hands-on training programs using the same communications link. Upon full mastery of the technologies, indigenous personnel could also employ similar SCADA arrangements to remotely monitor and control their constellation of RE systems. Two separate ACTS technology verification experiments (TVEs) have demonstrated that the portability of the Ultra Small Aperture Terminal (USAT) and the versatility of NASA's Advanced Communications Technology Satellite (ACTS), as well as the advantages of Ka band satellites, can be invaluable in providing energy training via distance education (DE), and for implementing renewable energy system SCADA. What has not been tested is the capabilities of these technologies for a simultaneous implementation of renewable energy DE and SCADA. Such concurrent implementations will be useful for preparing trainees in developing countries for their eventual SCADA operations. The project described in this correspondence is the first effort, to our knowledge, in this specific TVE. The setup for this experiment consists of a one-Watt USAT located at Florida Solar Energy Center (FSEC) connected to two satellite modems tuned to different frequencies to establish two duplex ACTS Ka-band communication channels. A short training program on operation and maintenance of the system will be delivered while simultaneously monitoring and controlling the hybrid using the same satellite

  7. Renewable Energy SCADA/Training Using NASA's Advanced Technology Communication Satellite

    Science.gov (United States)

    Kalu, A.; Emrich, C.; Ventre, G.; Wilson, W.; Acosta, Roberto (Technical Monitor)

    2000-01-01

    The lack of electrical energy in the rural communities of developing countries is well known, as is the economic unfeasibility of providing much needed energy to these regions via electric grids. Renewable energy (RE) can provide an economic advantage over conventional forms in meeting some of these energy needs. The use of a Supervisory Control and Data Acquisition (SCADA) arrangement via satellite could enable experts at remote locations to provide technical assistance to local trainees while they acquire a measure of proficiency with a newly installed RE system through hands-on training programs using the same communications link. Upon full mastery of the technologies, indigenous personnel could also employ similar SCADA arrangements to remotely monitor and control their constellation of RE systems. Two separate ACTS technology verification experiments (TVEs) have demonstrated that the portability of the Ultra Small Aperture Terminal (USAT) and the versatility of NASA's Advanced Communications Technology Satellite (ACTS), as well as the advantages of Ka band satellites, can be invaluable in providing energy training via distance education (DE), and for implementing renewable energy system SCADA. What has not been tested is the capabilities of these technologies for a simultaneous implementation of renewable energy DE and SCADA. Such concurrent implementations will be useful for preparing trainees in developing countries for their eventual SCADA operations. The project described in this correspondence is the first effort, to our knowledge, in this specific TVE. The setup for this experiment consists of a one-Watt USAT located at Florida Solar Energy Center (FSEC) connected to two satellite modems tuned to different frequencies to establish two duplex ACTS Ka-band communication channels. A short training program on operation and maintenance of the system will be delivered while simultaneously monitoring and controlling the hybrid using the same satellite

  8. Adult-trained perioperative nurses' practice of family-centered care.

    Science.gov (United States)

    Hamilton, Grainne; Corlett, Jo; Dowling, Maura

    The aim of this study was to explore adult-trained perioperative nurses' practice of family-centered care (FCC). A qualitative research design with a hermeneutic phenomenological approach was used. In-depth interviews were conducted with six adult-trained perioperative nurses. Data analysis was guided by Colaizzi's seven-step framework, resulting in a composite description of perioperative nurses' practice of FCC. While participants supported the principle of family involvement in care, they found its implementation in practice difficult and stressful. They reported that families often appeared inadequately prepared for the surgical experience, and subsequent poor experiences for families caused feelings of upset and inadequacy for nurses. While some of these findings are similar to those in previous studies of paediatric nurses' practice of FCC, this is the first known study to examine adult-trained perioperative nurses' practice of FCC. Participants articulated an awareness of what constitutes effective FCC and showed the motivation to accomplish the task of improving family-centered practice in their practice area.

  9. The use of information technology in trainning human resources: an e-learning case study

    OpenAIRE

    Gascó Gascó, José Luis; Llopis Taverner, Juan; González Ramírez, María Reyes

    2004-01-01

    This paper addresses the influence of information technology in human resources management (HRM) and specifically on training policy through the experience of a Spanish telecommunications firm, Telefonica. The characteristics of the training model designed by this firm to face new environments is considered and the technologies used, the key actions, the disadvantages and success factors are detected in trying to grow an E-learning company. Success factors in training policy are identified. T...

  10. Vaccines for HIV | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The development of an effective HIV vaccine has been an ongoing area of research. The high variability in HIV-1 virus strains has represented a major challenge in successful development. Ideally, an effective candidate vaccine would provide protection against the majority of clades of HIV. Two major hurdles to overcome are immunodominance and sequence diversity. This vaccine utilizes a strategy for overcoming these two issues by identifying the conserved regions of the virus and exploiting them for use in a targeted therapy. NCI seeks licensees and/or research collaborators to commercialize this technology, which has been validated in macaque models.

  11. Center for Alternative Energy Storage Research and Technology

    Science.gov (United States)

    2013-03-28

    and civilian markets . Research at CAESRT has been directed primarily at Defense Department (Army) applications to provide effective technology...system-level operational strategies . Specifically, CAESRT has conducted interrelated research on: nanostructured battery and capacitor...applications are sensitive to the characteristics of the applications. Often it takes more than 3nS 2pS 4pS 1pS 3pS 2nS 4nS 1Li 3Li 1C 2C 3C 4C 5C 2Li

  12. A User Centered Approach to Developing Emergent Technology Products

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo; McAloone, Timothy Charles; Schlegel, Tanja

    2008-01-01

    be used too early in the design process, given that users respond best to issues they know or can relate to. This paper presents a case study where a user-centred approach was used to determine when and how to involve users in the design of a TV-enabled mobile telephone. The aim of the study......Current participatory design methods do not allow designers to gain the insight required to develop products with emerging technologies, that is, products that do not have any precedents in the users’ knowledge base and experience. This poses challenges to the designers, as input from users cannot...

  13. Development of a National Center for Hydrogen Technology

    Energy Technology Data Exchange (ETDEWEB)

    Jay C. Almlie; Bruce Wood; Rich Schlupp

    2007-03-01

    In November 2005, the Energy & Environmental Research Center (EERC), ePowerSynergies, Inc. (ePSI), and Resurfice Corporation teamed to develop, produce, and demonstrate the world's first and only fuel cell-powered ice resurfacer. The goals of this project were: {sm_bullet} To educate the public on the readiness, practicality, and safety of fuel cells powered by hydrogen fuel and {sm_bullet} To establish a commercialization pathway in an early-adopter, niche market. The vehicle was developed and produced in a short 3-month span. The vehicle made its world debut at U.S. Senator Byron Dorgan's (D-ND) 2005 Hydrogen Energy Action Summit. Subsequently, the vehicle toured North America appearing at numerous public events and conferences, receiving much attention from international media outlets.

  14. Psychological Center as a Foundation for the Practical Training of Clinical psychologists at the Saint-Petersburg State University

    Directory of Open Access Journals (Sweden)

    Ekaterina A Burina

    2016-05-01

    In overall, the Psychological Center with its long-term experience of preparation and practical skills training for the students of the Clinical Psychology specialty, has proven its necessity, relevance, and effectiveness.

  15. The role of educational technology in humanities teacher training

    Directory of Open Access Journals (Sweden)

    Antonio De Prisco

    2003-01-01

    Full Text Available Teacher training, so much as that initial ongoing, and 'a very complex issue and is attributed to piu'argomenti distinct, but at the same time linked to each other: the basic training deifuturi teachers, updating subject content and to-date ', training in new teaching methods and continuous assessment dellaloro effectiveness, and the necessary openness to reality' social and typicality 'territorial where education and training facilities operate.

  16. Why NIH Scientists Need to Report an Invention | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    As an NIH scientist, you must report new inventions, including improvements of previously reported inventions, to the Technology Transfer Manager assigned to your Laboratory. If you do not know the name of your TTM, please call or email the Technology Transfer Center.  | [google6f4cd5334ac394ab.html

  17. Investigating "The Coolest School in America": How Technology Is Used in a Learner-Centered School

    Science.gov (United States)

    Aslan, Sinem; Reigeluth, Charles M.

    2016-01-01

    Reigeluth et al. ("Educ Technol" 48(6):32-39, 2008) proposed major and secondary functions for educational technology systems for the learner-centered paradigm of education. However, the functions proposed should be formatively evaluated and revised using a variety of cases to develop a better understanding of how technology can support…

  18. Using a Student-Centered Model for Assessing Preservice Teachers' Use of Technology in Student Teaching

    Science.gov (United States)

    Pratt, David; Stevenson, Heidi J.

    2007-01-01

    This article describes a student-centered assessment model used at a large university to encourage preservice teachers' use of technology in the K-12 classroom. This model allows preservice teachers to have discretion over the content, form, and time period in which they complete technology proficiencies. More specifically, this article describes…

  19. Development of training support system based on three-dimensional computer graphics technology

    Energy Technology Data Exchange (ETDEWEB)

    Kude, Akizumi; Hanafusa, Hidemitsu; Matsuoka, Yoshinori; Shirute, Ikuo [Institute of Nuclear Safety System Inc., Seika, Kyoto (Japan); Ogura, Kazuhide

    1998-09-01

    Recently, Virtual Reality (VR) technology has developed quickly, together with research conducted on various elemental and related technologies and research in various fields of its application. In particular, the development of computer graphics (CG) technology at the same pace as the progress in computer performance is remarkable. We have developed a new type of training support system using three-dimensional (3D) CG technology. It is the training support system for disassembling and assembling a motor-operated gate valve. The training support system proposed is based on a personal computer and can be used easily by anyone. The system configuration is outlined herein. (author)

  20. Training of Instrumentalists and Development of New Technologies on SOFIA

    CERN Document Server

    Erickson, Edwin F; Baluteau, Jean-Paul; Becklin, Eric E; Bjoraker, Gordon; Burton, Michael; Caroff, Lawrence J; Ceccarelli, Cecilia; Churchwell, Edward B; Clemens, Dan P; Cohen, Martin; Cruikshank, Dale P; Dinerstein, Harriet L; Dunham, Edward W; Fazio, Giovanni G; Gatley, Ian; Gehrz, Robert D; Genzel, Reinhard; Graf, Paul; Greenhouse, Matthew A; Harper, Doyal A; Harvey, Paul M; Harwit, Martin; Hildebrand, Roger H; Hollenbach, David J; Lane, Adair P; Larson, Harold P; Lord, Steven D; Madden, Suzanne; Melnick, Gary J; Neufeld, David A; Olkin, Catherine B; Packham, Christopher C; Roellig, Thomas L; Roeser, Hans-Peter; Sandford, Scott A; Sellgren, Kristen; Simpson, Janet P; Storey, John W V; Telesco, Charles M; Tielens, Alexander G G M; Tokunaga, Alan T; Townes, Charles H; Walker, Christopher K; Werner, Michael W; Whitcomb, Stanley E; Wolf, Juergen; Woodward, Charles E; Young, Erick T; Zmuidzinas, Jonas

    2009-01-01

    This white paper is submitted to the Astronomy and Astrophysics 2010 Decadal Survey (Astro2010)1 Committee on the State of the Profession to emphasize the potential of the Stratospheric Observatory for Infrared Astronomy (SOFIA) to contribute to the training of instrumentalists and observers, and to related technology developments. This potential goes beyond the primary mission of SOFIA, which is to carry out unique, high priority astronomical research. SOFIA is a Boeing 747SP aircraft with a 2.5 meter telescope. It will enable astronomical observations anywhere, any time, and at most wavelengths between 0.3 microns and 1.6 mm not accessible from ground-based observatories. These attributes, accruing from the mobility and flight altitude of SOFIA, guarantee a wealth of scientific return. Its instrument teams (nine in the first generation) and guest investigators will do suborbital astronomy in a shirt-sleeve environment. The project will invest $10M per year in science instrument development over a lifetime o...

  1. Two-Phase Technology at NASA/Johnson Space Center

    Science.gov (United States)

    Ungar, Eugene K.; Nicholson, Leonard S. (Technical Monitor)

    1999-01-01

    Since the baseline International Space Station (ISS) External Active Thermal Control System (EATCS) was changed from a two-phase mechanically pumped system to a single phase cascade system in the fall of 1993, two-phase EATCS research has continued at a low level at JSC. One of-the lessons of the ISS EATCS selection was that two-phase thermal control systems must have significantly lower power than comparable single phase systems to overcome their larger radiator area, larger line and fluid mass, and perceived higher technical risk. Therefore, research at JSC has concentrated on low power mechanically pumped two-phase EATCSs. In the presentation, the results of a study investigating the trade of single and two-phase mechanically pumped EATCSs for space vehicles will be summarized. The low power two-phase mechanically pumped EATCS system under development at JSC will be described in detail and the current design status of the subscale test unit will be reviewed. Also, performance predictions for a full size EATCS will be presented. In addition to the discussion of two-phase mechanically pumped EATCS development at JSC, two-phase technologies under development for biological water processing will be discussed. These biological water processor technologies are being prepared for a 2001 flight experiment and subsequent usage on the TransHab module on the International Space Station.

  2. Practical Education Support to Foster Engineers at Manufacturing and Engineering Design Center in Muroran Institute of Technology

    Science.gov (United States)

    Kazama, Toshiharu; Hanajima, Naohiko; Shimizu, Kazumichi; Satoh, Kohki

    To foster engineers with creative power, Muroran Institute of Technology established Manufacturing and Engineering Design Center (MEDeC) that concentrates on Monozukuri. MEDeC consists of three project groups : i) Education Support Group provides educational support for practical training classes on and off campus and PDCA (plan-do-check-action) -conscious engineering design education related to Monozukuri ; ii) Fundamental Manufacturing Research Group carries out nurture research into fundamental and innovative technology of machining and manufacturing, and iii) Regional Cooperation Group coordinates the activities in cooperation with bureau, schools and industries in and around Muroran City. MEDeC has a fully integrated collection of machine tools and hand tools for manufacturing, an atelier, a tatara workplace, implements for measurement and related equipment designed for practically teaching state-of-the-practice manufacturing methods.

  3. Teachers’ training and the use of educational technologies: research results

    Directory of Open Access Journals (Sweden)

    Marina Chiaro

    2017-01-01

    Full Text Available Acquire technological skills is an important requirement clearly evident by teachers in primary and secondary school at the end of a blended training course held at the University of Rome Three about issues related to students with Learning Disabilities. It is also significant the chance for teachers to constitute professional communities, such as the Community of Practice in the Lifelong Learning perspective, that might lead to collaborative strategies, knowledge sharing, discussion and reflection that are necessary to face the difficulties that every innovation involves. These factors can help teachers to overcome the condition of isolation which represents an important barrier to the development of an inclusive school in order to design inclusive educational strategies with the use of Information and Communication Technology according to the cultural perspective of the International Classification of Functioning, Disability and Health for Children and Youth.Formazione degli insegnanti ed impiego delle tecnologie didattiche per l’inclusione: risultati di ricercaAcquisire competenze tecnologiche rappresenta una importante esigenza palesata da docenti in servizio nella scuola primaria e secondaria di I e II grado al termine di un percorso formativo svolto in modalità blended presso l’Università degli Studi di Roma Tre su tematiche relative agli allievi con Disturbi Specifici di Apprendimento. Rilevante anche la possibilità per gli insegnanti di costituire delle comunità professionali, quali le Comunità di Pratica, in ottica di lifelong learning, che possano dar luogo a strategie collaborative, di condivisione delle conoscenze, di confronto e riflessione necessari per affrontare le difficoltà che ogni innovazione comporta. Tali modalità possono rappresentare un supporto al superamento della condizione di isolamento in cui spesso i docenti si trovano ad operare, aspetto che costituisce uno dei principali ostacoli allo sviluppo di una

  4. Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

    Science.gov (United States)

    1999-01-01

    Center Director Roy Bridges stops to talk to one of the vendors at the Disability Awareness and Action Working Group (DAAWG) Technology Fair being held Oct. 20-21 at Kennedy Space Center. With him at the far left is Sterling Walker, director of Engineering Development at KSC and chairman of DAAWG, and Nancie Strott, a multi-media specialist with Dynacs and chairperson of the Fair; at the right is Carol Cavanaugh, with KSC Public Services. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

  5. Technology complementing military behavioral health efforts at tripler army medical center.

    Science.gov (United States)

    Stetz, Melba C; Folen, Raymond A; Yamanuha, Bronson K

    2011-06-01

    The purpose of this article is to provide a short narrative on the ways that behavioral health professionals and their patients are currently benefitting from the use of technology. Examples stem from applications of technology to patients/research participants at the Tripler Army Medical Center. The paper also discusses how current use of this technology has made it possible to serve individuals in their own cultural environment, providing a cost-effective means of providing mental health services.

  6. JPRS Report, Science & Technology, Japan, Key Tech Center Advanced Communications Research

    Science.gov (United States)

    2007-11-02

    information society . Today, information telecommunication systems are being networked through interconnections, and it is expected that such systems will play a leading role in the future flow of advanced information. Therefore in order to predict future technological developments, it is necessary to elucidate the themes of the development of communication technologies related both to network construction and administration, and to analyze user needs sufficiently. From this perspective, the Key Technology Center initiated its ’Research in Advanced Communications

  7. Surgery for gastrointestinal malignant melanoma:Experience from surgical training center

    Institute of Scientific and Technical Information of China (English)

    Thawatchai; Akaraviputh; Satida; Arunakul; Varut; Lohsiriwat; Cherdsak; Iramaneerat; Atthaphorn; Trakarnsanga

    2010-01-01

    AIM:To characterize clinical features,surgery,outcome,and survival of malignant melanoma(MM) of the gastrointestinal(GI) tract in a surgical training center in Bangkok,Thailand. METHODS:A retrospective review was performed for all patients with MM of the GI tract treated at our institution between 1997 and 2007. RESULTS:Fourteen patients had GI involvement either in a metastatic form or as a primary melanoma. Thirteen patients with sufficient data were reviewed. The median age of the patients was 66 years(r...

  8. 1993 study of long-billed curlews on the Yakima Training Center

    Energy Technology Data Exchange (ETDEWEB)

    Hand, K.D.; Cadwell, L.L.

    1994-04-01

    Pacific Northwest Laboratory conducted a study for the US Department of the Army on long-billed curlews (Numenius americanus) on the Yakima Training Center (YTC) in the spring and summer of 1993. Long-billed curlews are a Class IIIc federal candidate species and are listed as a ``species of special concern`` by the Washington Department of Wildlife. The objectives of this study were to (1) locate major nesting areas, (2) locate brood rearing areas, (3) evaluate habitat requirements, (4) determine diet, (5) evaluate response to troop activities, (6) estimate population size, (7) estimate recruitment rates, and (8) establish a relative abundance survey method.

  9. A University-based Forensics Training Center as a Regional Outreach, Education, and Research activity

    Directory of Open Access Journals (Sweden)

    Rayford B. Vaughn

    2009-04-01

    Full Text Available This paper describes a university-based Forensics Training Center (FTC established by a Department of Justice grant for the purpose of improving the ability of state and local law enforcement in the Southeastern part of the United States to address the rising incidence of computer based crime. The FTC effort is described along with supporting evidence of its need. The program is not only a service activity, but also contributes to the Mississippi State University (MSU security program pedagogy, and research effort.

  10. Statewide CBT Training for Clinicians and Supervisors Treating Youth: The New York State Evidence Based Treatment Dissemination Center

    Science.gov (United States)

    Gleacher, Alissa A.; Nadeem, Erum; Moy, Amanda J.; Whited, Andria L.; Albano, Anne Marie; Radigan, Marleen; Wang, Rui; Chassman, Janet; Myrhol-Clarke, Britt; Hoagwood, Kimberly Eaton

    2011-01-01

    In recent years, several states have undertaken efforts to disseminate evidence-based treatments to agencies and clinicians in their children's service system. In New York, the Evidence Based Treatment Dissemination Center adopted a unique translation-based training and consultation model in which an initial 3-day training was combined with a year…

  11. Training residents and nurses to work as a patient-centered care team on a medical ward.

    Science.gov (United States)

    Laird-Fick, Heather S; Solomon, David; Jodoin, Christine; Dwamena, Francesca C; Alexander, Kim; Rawsthorne, Larry; Banker, Tammy; Gourineni, Nandu; Aloka, Feras; Frankel, Richard M; Smith, Robert C

    2011-07-01

    To train medical residents and nurses to work together as a patient-centered care (PCC) team on a medical ward and test its feasibility, nurses' learning, and patient outcomes. Working with administrative leadership, we consolidated residents' patients on one 32-bed ward. Already training residents in an evidence-based patient-centered method, we now trained 5 nurse leaders similarly, and they then trained all staff nurses. A national consultant visited twice. Specific team-building activities for nurses and residents fostered ward interactions. We used a retrospective pre/post/6-month post-design to evaluate nurses' knowledge and self-efficacy of patient-centered skills. Patients were assigned non-randomly to our unit or comparison units from our emergency room; using a post-test only design, the primary endpoint was patient satisfaction. 28 trained nurses showed improvement in knowledge (p=0.02) and self-efficacy (p=0.001). 81 treatment patients showed no improvement in satisfaction (p=0.44). Training nurses in patient-centered practices were effective. Unique in this country, we also trained nurses and residents together as a PCC team on a medical ward and showed it was feasible and well accepted. We provide a template for team training and urge that others explore this important new area and contribute to its further development. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  12. Urban Combat Advanced Training Technology (Technologie avancee d’entrainement au combat urbain)

    Science.gov (United States)

    2015-07-01

    plants and pollution ; • Signs for borders and limits; and • Fines and consequences. Handling of Equipment Describe the takeover-handling-handover...REPORT TR-MSG-063 Urban Combat Advanced Training Technology (Technologie avancée d’entraînement au combat urbain) Final Report of Task Group 063...TECHNOLOGY ORGANIZATION AC/323(MSG-063)TP/591 www.sto.nato.int STO TECHNICAL REPORT TR-MSG-063 Urban Combat Advanced Training Technology

  13. The Scientific Data Management Center: Available Technologies and Highlights

    Energy Technology Data Exchange (ETDEWEB)

    Shoshani, Arie; Altintas, Ilkay; Chen, Jin; Chin, George; Choudhary, Alok; Crawl, Daniel; Critchlow, Terence J.; Gao, K.; Grimm, B.; Iyer, H.; Kamath, Chandrika; Khan, Ayla; Klasky, S.; Koehler, Sven; Lang, Rob; Latham, Robert J.; Li, J. W.; Liao, Wei-keng; Ligon, J.; Liu, Q.; Ludaescher, Bertram T.; Mouallem, Pierre; Nagappan, Mie; Podhorszki, Norbert; Ross, Rob; Rotem, Doron; Samatova, Nagiza F.; Silva, C.; Sim, A.; Tchoua, Roselynne; Thakur, R.; Vouk, M.; Wu, J.; Yu, Weikuan

    2011-09-30

    Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Furthermore, exploratory analysis requires techniques for efficiently selecting subsets of the data. Third, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration.

  14. Integrated surgical emergency training plan in the internship: A step toward improving the quality of training and emergency center management.

    Science.gov (United States)

    Akhlaghi, Mohammad Reza; Vafamehr, Vajiheh; Dadgostarnia, Mohammad; Dehghani, Alireza

    2013-01-01

    In this study, by using a problem-oriented approach in the needs assessment, identifying the defects and deficiencies in emergency health training centers has been determined as the basis for the requirements. The main objective of the study was the implementation of surgical emergencies integration of the five surgical groups (general surgery, urology, orthopedics, neurosurgery, and ENT) to meet the needs and determining its efficacy. THIS INTERVENTIONAL STUDY WAS CONDUCTED IN THREE PHASES: (1) Phase I (design and planning): Needs assessment, recognition of implementation barriers and providing the objectives and training program for integrated emergencies. (2) Phase II (implementation): Justification of the main stakeholders of the project, preparation of students' duties in the emergency department, preparation of on-duty plans, supervising the implementation of the program, and reviewing the plan in parallel with the implementation based on the problems. (3) Phase III (evaluation): Reviewing the evidences based on the amount of efficiency of the plan and justification for its continuation. In the first and the second phase, the data were collected through holding focus group meetings and interviews. In the third phase, the opened-reply and closed-reply researcher-made questionnaires were used. The questionnaire face and content validity were confirmed by experts and the reliability was assessed by calculating the Cronbach's alpha. ACCORDING TO THE VIEWS OF THE INTERNS, ASSISTANTS, TEACHERS, AND EMERGENCY PERSONNEL, THE POSITIVE FEATURES OF THE PLAN INCLUDED THE FOLLOWING: Increasing the patients' satisfaction, reducing the patients' stay in the Emergency Department, increasing the speed of handling the patients, balancing the workloads of the interns, direct training of interns by young teachers of emergency medicine, giving the direct responsibility of the patient to the intern, practical and operational training of emergency issues, increasing the teamwork

  15. Training center and response to emergencies; Centro de treinamento e resposta a emergencia

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Paulo Manuel da; Endo, Nelson Yukio [PMS Consultoria em Engenharia de Seguranca e Ambiental S/C Ltda., Sao Paulo, SP (Brazil)

    2003-07-01

    Accidents with installations and products have troubled companies and governmental authorities too, who are actuating so much by inspecting, and prevention of these events must be intensified. It is clear that all persons involved have to qualify for risks management of his activities and to response satisfactorily when accidents occur. For attending this necessity, a partnership with Petroleo Brasileiro S/A - PETROBRAS and PMS Consultoria em Engenharia de Seguranca e Ambiental S/C Ltda, was established to build and operate a Training Centre and Emergency Response. The philosophy of this project is that the major parts of accidents happen many times at the same conditions, and if the accidents representation will be in real conditions for training, in practice it is faster to control the events, and what is more important to avoid repeated accidents. Another purpose of the Centre is to integrate universities and industries, developing research and news technologies, for attending companies needs in this millennium. (author)

  16. The Efficacy of Deliberate Practice Delivered Using Asynchronous Training Technology

    Directory of Open Access Journals (Sweden)

    Colleen E. McEdwards

    2014-04-01

    Full Text Available Employee productivity is key to survival in business. Senior employees require access to advanced training that does not necessitate extended periods away from their work. Once performance begins to plateau, it can be difficult to reach experienced employees with cost-effective, timely, and relevant training opportunities. Organizations must find ways to enhance employee performance; however, research suggests workplace training is too expensive and is too often without lasting benefit. The purpose of this study is to further quantify deliberate practice as a potentially efficient, customizable mode of training using asynchronous e-learning. The study compared traditional seminars with online deliberate practice training. While additional research is needed in wider learning contexts and with larger sample sizes, improvements among the deliberate practice groups were significant. Using a mixed methods pretest/posttest research design, the deliberate practice training showed improved performance and increased satisfaction compared with the traditional seminar approach.

  17. VACET: Proposed SciDAC2 Visualization and Analytics Center forEnabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, W.; Johnson, Chris; Hansen, Charles; Parker, Steve; Sanderson, Allen; Silva, Claudio; Tricoche, Xavier; Pascucci, Valerio; Childs, Hank; Cohen, Jonathon; Duchaineau, Mark; Laney, Dan; Lindstrom,Peter; Ahern, Sean; Meredith, Jeremy; Ostrouchov, George; Joy, Ken; Hamann, Bernd

    2006-06-19

    This paper accompanies a poster that is being presented atthe SciDAC 2006 meeting in Denver, CO. This project focuses on leveragingscientific visualization and analytics software technology as an enablingtechnology for increasing scientific productivity and insight. Advancesincomputational technology have resultedin an "information big bang,"which in turn has createda significant data understanding challenge. Thischallenge is widely acknowledged to be one of the primary bottlenecks incontemporary science. The vision for our Center is to respond directly tothat challenge by adapting, extending, creating when necessary anddeploying visualization and data understanding technologies for ourscience stakeholders. Using an organizational model as a Visualizationand Analytics Center for Enabling Technologies (VACET), we are wellpositioned to be responsive to the needs of a diverse set of scientificstakeholders in a coordinated fashion using a range of visualization,mathematics, statistics, computer and computational science and datamanagement technologies.

  18. Safety, Reliability, and Quality Assurance Provisions for the Office of Aeronautics, Exploration and Technology Centers

    Science.gov (United States)

    1991-01-01

    This Handbook establishes general safety, reliability, and quality assurance (SR&QA) guidelines for use on flight and ground-based projects conducted at the Ames, Langley, and Lewis Research Centers, hereafter identified as the Office of Aeronautics, Exploration and Technology (OAET) Centers. This document is applicable to all projects and operations conducted at these Centers except for those projects covered by more restrictive provisions such as the Space Shuttle, Space Station, and unmanned spacecraft programs. This Handbook is divided into two parts. The first (Chapters 1 and 2) establishes the SR&QA guidelines applicable to the OAET Centers, and the second (Appendices A, B, C, and D) provides examples and definitions for the total SR&QA program. Each center should implement SR&QA programs using these guidelines with tailoring appropriate to the special projects conducted by each Center. This Handbook is issued in loose-leaf form and will be revised by page changes.

  19. Game Mechanics and Bodily Interactions: Designing Interactive Technologies for Sports Training

    DEFF Research Database (Denmark)

    Jensen, Mads Møller

    Advancements in wearable and ubiquitous computing technologies have radically increased the possibilities for designing full-body human-computer interactions. Among this multitude of new bodily interaction possibilities are sports training technologies and bodily games. In terms of sports training...... activity as a control mechanism or the core game mechanic. While sports training technologies and bodily games build upon similar technologies and emanate from sports, they do not share focus. One focuses on measuring, monitoring and skill acquisition, while the other focuses on motivation, engagement...... and enjoyment. Thus, despite being two coexisting research areas, they do not extend or contribute to one another per se. However, bridging this gap by combining skill acquisition knowledge from sports training technologies with motivational game mechanics from bodily games holds great potential for designing...

  20. Game Mechanics and Bodily Interactions: Designing Interactive Technologies for Sports Training

    DEFF Research Database (Denmark)

    Jensen, Mads Møller

    2016-01-01

    Advancements in wearable and ubiquitous computing technologies have radically increased the possibilities for designing full-body human-computer interactions. Among this multitude of new bodily interaction possibilities are sports training technologies and bodily games. In terms of sports training...... activity as a control mechanism or the core game mechanic. While sports training technologies and bodily games build upon similar technologies and emanate from sports, they do not share focus. One focuses on measuring, monitoring and skill acquisition, while the other focuses on motivation, engagement...... and enjoyment. Thus, despite being two coexisting research areas, they do not extend or contribute to one another per se. However, bridging this gap by combining skill acquisition knowledge from sports training technologies with motivational game mechanics from bodily games holds great potential for designing...

  1. ON IMPROVING THE QUALITY OF VOCATIONAL AND TECHNOLOGICAL TRAINING OF FUTURE TEACHERS OF TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    O. V. SIDOROV

    2016-01-01

    Full Text Available The article is devoted to improving the content of vocational and technological and methodical preparation of the future teachers of technology. The author tells the technology training of students of electro- physical and electrochemical methods of processing of construction materials, which utilizes the integration of natural sciences, engineering and technological disciplines, developed using the existing set of teaching and laboratory facilities. Settings allow students to study the complex physical processes experimental study of the problem. The paper also shows a feature of the organization of a laboratory practical work in the form of educational and research work of students, to teach them to perform the volume of independent work using scientific methods of theoretical and experimental studies. The role of these methods is important for the development of creative thinking of students, forming engineering design knowledge and skills, as well as the skills of independent research, which provides, in turn, higher cognitive and creative activity of students. The author presents the results of his pedagogical experiment. Thus, the introduction in the educational process UIRS going involvement of students in research work, which becomes an important part in the preparation of research methodology equips their scientific and technical thinking, develops an interest in creativity, it helps provide them with in-depth knowledge, and the ability to apply them in practice. The research work of students includes research activities not only in the educational process, but also to participate in the circles of the department in the scientific work of the laboratory.

  2. SOFTWARE TRAINING AIDS DEVELOPMENT AND IMPLEMENTATION IN PROFESSIONAL PREPARATION PRACTICE OF TECHNOLOGICAL EDUCATION TEACHER

    Directory of Open Access Journals (Sweden)

    Anatoliy G. Gritchenko

    2013-03-01

    Full Text Available The article outlines the theoretical and practical aspects of software training aids development and implementation in professional preparation practice of technological education teacher. The myriad opportunities of new information technologies are described; the characteristic features of modern software training tool (STT are revealed; the main algorithmic structure circuits of training programs construction (linear, cyclic, with hyperlinks, to the labels, which enable the development of STT variety and functionality are given; the methodology of STT creating is described based on the analysis of the technology teacher preparation in HEE content, MITE didactic functions and selection criteria of educational software for this area of specialist’s preparation.

  3. The feasibility of a unified role for NASA regional dissemination centers and technology application teams

    Science.gov (United States)

    1974-01-01

    Insights and recommendations arising from a study of the feasibility of combining the NASA Regional Dissemination Center (RDC) and Technology Application Team (Tateam) roles to form Regional Application Centers (RADC's) are presented. The apparent convergence of the functions of RDC's and Tateams is demonstrated and strongly supportive of the primary recommendation that an applications function be added to those already being performed by the RDC's. The basis of a national network for technology transfer and public and private sector problem solving is shown to exist, the skeleton of which is an interactive network of Regional Application Centers and NASA Field Centers. The feasibility of developing and extending this network is considered and the detailed ramifications of so doing are discussed and the imperatives emphasized. It is hypothesized that such a national network could become relatively independent of NASA funding within five years.

  4. Modern Techniques and Technologies Applied to Training and Performance Monitoring.

    Science.gov (United States)

    Sands, William A; Kavanaugh, Ashley A; Murray, Steven R; McNeal, Jeni R; Jemni, Monèm

    2016-12-05

    Athlete preparation and performance continues to increase in complexity and costs. Modern coaches are shifting from reliance on personal memory, experience, and opinion to evidence from collected training load data. Training load monitoring may hold vital information for developing systems of monitoring that follow the training process with such precision that both performance prediction and day-to-day management of training become an adjunct to preparation and performance. Time series data collection and analyses in sport are still in their infancy with considerable efforts being applied in "big-data" analytics and models of the appropriate variables to monitor and methods for doing so. Training monitoring has already garnered important applications, but lacks a theoretical framework from which to develop further. As such, we propose a framework involving the following: analyses of individuals, trend analyses, rules-based analysis, and statistical process control.

  5. Best practice in communications training for public engagement with science, technology, engineering and mathematics

    Directory of Open Access Journals (Sweden)

    Karen Bultitude

    2009-05-01

    Full Text Available Effective training in key communications skills is critical for successful public engagement. However, what are the secrets to designing and delivering an effectual training course? This paper outlines key findings from a research study into communication training programmes for public engagement with STEM (science, technology, engineering and mathematics. The research focused on training in direct communication methods, (as separate from media training and encompassed both trainers and trainees, the latter group spanning across both scientists and explainers. The findings indicated that training courses are effective at increasing involvement in science communication events and trainees feel more confident and able to engage due to training. An interactive style was found to be a key element of training courses. Demonstrations of good practice followed by own performance with feedback were also important, preferably involving a ‘real’ audience. A list of guidelines on best practice has been developed which offers practical advice.

  6. Training the Next Generation of Open Source Developers: A Case Study of OSU Libraries & Press’ Technology Training Program

    Directory of Open Access Journals (Sweden)

    Evviva Weinraub Lajoie

    2015-01-01

    Full Text Available The Emerging Technologies & Services department at Oregon State University Libraries & Press has implemented a training program for our technology student employees on how and why they should engage in Open Source community development. This article will outline what they've done to implement this program, discuss the benefits they've seen as a result of these changes, and will talk about what they viewed as necessary to build and promote a culture of engagement in open communities.

  7. SciDAC Visualization and Analytics Center for EnablingTechnology

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E. Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci,Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jeremy; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier

    2006-11-28

    The SciDAC2 Visualization and Analytics Center for EnablingTechnologies (VACET) began operation on 10/1/2006. This document, dated11/27/2006, is the first version of the VACET project management plan. Itwas requested by and delivered to ASCR/DOE. It outlines the Center'saccomplishments in the first six weeks of operation along with broadobjectives for the upcoming future (12-24 months).

  8. SciDAC Visualization and Analytics Center for EnablingTechnology

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E. Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci,Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jeremy; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier

    2006-11-28

    The SciDAC2 Visualization and Analytics Center for EnablingTechnologies (VACET) began operation on 10/1/2006. This document, dated11/27/2006, is the first version of the VACET project management plan. Itwas requested by and delivered to ASCR/DOE. It outlines the Center'saccomplishments in the first six weeks of operation along with broadobjectives for the upcoming future (12-24 months).

  9. Hybrid Electric Power Train and Control Strategies Automotive Technology Education (GATE) Program

    Energy Technology Data Exchange (ETDEWEB)

    Andrew Frank

    2006-05-31

    Plug-in hybrid electric vehicles (PHEV) offer societal benefits through their ability to displace the use of petroleum fuels. Petroleum fuels represent a polluting and politically destabilizing energy carrier. PHEV technologies can move transportation away from petroleum fuel sources by enabling domestically generated electricity and liquids bio-fuels to serve as a carrier for transportation energy. Additionally, the All-Electric-Range (AER) offered by PHEVs can significantly reduce demand for expensive and polluting liquid fuels. The GATE funding received during the 1998 through 2004 funding cycle by the UC Davis Hybrid Electric Vehicle Center (HEVC) was used to advance and train researchers in PHEV technologies. GATE funding was used to construct a rigorous PHEV curriculum, provide financial support for HEVC researchers, and provide material support for research efforts. A rigorous curriculum was developed through the UC Davis Mechanical and Aeronautical Engineering Department to train HEVC researchers. Students' research benefited from this course work by advancing the graduate student researchers' understanding of key PHEV design considerations. GATE support assisted HEVC researchers in authoring technical articles and producing patents. By supporting HEVC researchers multiple Master's theses were written as well as journal articles and publications. The topics from these publications include Continuously Variable Transmission control strategies and PHEV cross platform controls software development. The GATE funding has been well used to advance PHEV systems. The UC Davis Hybrid Electric Vehicle Center is greatly appreciative for the opportunities GATE funding provided. The goals and objectives for the HEVC GATE funding were to nourish engineering research in PHEV technologies. The funding supplied equipment needed to allow researchers to investigate PHEV design sensitivities and to further optimize system components. Over a dozen PHEV

  10. SciDAC Visualization and Analytics Center for EnablingTechnologies

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E. Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci,Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jermey; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier.

    2007-06-30

    The Visualization and Analytics Center for EnablingTechnologies (VACET) focuses on leveraging scientific visualization andanalytics software technology as an enabling technology for increasingscientific productivity and insight. Advances in computational technologyhave resulted in an 'information big bang,' which in turn has created asignificant data understanding challenge. This challenge is widelyacknowledged to be one of the primary bottlenecks in contemporaryscience. The vision of VACET is to adapt, extend, create when necessary,and deploy visual data analysis solutions that are responsive to theneeds of DOE'scomputational and experimental scientists. Our center isengineered to be directly responsive to those needs and to deliversolutions for use in DOE's large open computing facilities. The researchand development directly target data understanding problems provided byour scientific application stakeholders. VACET draws from a diverse setof visualization technology ranging from production quality applicationsand application frameworks to state-of-the-art algorithms forvisualization, analysis, analytics, data manipulation, and datamanagement.

  11. The development and technology transfer of software engineering technology at NASA. Johnson Space Center

    Science.gov (United States)

    Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

    1992-01-01

    The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

  12. Training Using Technology in the Adult ESL Classroom

    Science.gov (United States)

    McClanahan, Lorna

    2014-01-01

    In this article I discuss two reasons for the slow adoption of technology as an instructional tool in adult English as a Second Language (ESL) education. I outline recent facts about the relationships between today's adult ESL learners and technology, and then construct a background of theoretical support in favor of integrating technology in…

  13. Conceptualising Postgraduate Training in Biotechnology at Universities of Technology

    Science.gov (United States)

    Fossey, A.

    2012-01-01

    Universities of Technology are mandated to provide career-orientated programmes preparing graduates for the workplace, doing research aimed at identifying societal and industrial needs, and finding solutions. Universities of Technology interweave technology with university endeavours; focusing on the know-how for the fabrication of things, and the…

  14. Conceptualising Postgraduate Training in Biotechnology at Universities of Technology

    Science.gov (United States)

    Fossey, A.

    2012-01-01

    Universities of Technology are mandated to provide career-orientated programmes preparing graduates for the workplace, doing research aimed at identifying societal and industrial needs, and finding solutions. Universities of Technology interweave technology with university endeavours; focusing on the know-how for the fabrication of things, and the…

  15. Computer Technology Training in the Workplace: A Longitudinal Investigation of the Effect of Mood.

    Science.gov (United States)

    Venkatesh; Speier

    1999-07-01

    How does a person's mood during technology training influence motivation, intentions, and, ultimately, usage of the new technology? Do these mood effects dissipate or are they sustainable over time? A repeated-measures field study (n = 316) investigated the effect of mood on employee motivation and intentions toward using a specific computer technology at two points in time: immediately after training and 6 weeks after training. Actual usage behavior was assessed for 12 weeks after training. Each individual was assigned to one of three mood treatments: positive, negative, or control. Results indicated that there were only short-term boosts in intrinsic motivation and intention to use the technology among individuals in the positive mood intervention. However, a long-term lowering of intrinsic motivation and intention was observed among those in the negative mood condition. Copyright 1999 Academic Press.

  16. Final Report for "Center for Technology for Advanced Scientific Component Software"

    Energy Technology Data Exchange (ETDEWEB)

    Svetlana Shasharina

    2010-12-01

    The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

  17. Attentional and affective consequences of technology supported mindfulness training: a randomised, active control, efficacy trial

    OpenAIRE

    2016-01-01

    Background Mindfulness training (MT) programs represent an approach to attention training with well-validated mental health benefits. However, research supporting MT efficacy is based predominantly on weekly-meeting, facilitator-led, group-intervention formats. It is unknown whether participants might benefit from neurofeedback-assisted, technology-supported MT (N-tsMT), in which meditation is delivered individually, without the need for a facilitator, travel to a training site, or the presen...

  18. IUGS Commission on Geoscience Education, Training and Technology Transfer (COGE)

    Institute of Scientific and Technical Information of China (English)

    Gary Lewis; Wesley Hill

    2006-01-01

    @@ Background and history on the Commission on Geoscience Education Our history In previous years, IUGS conducted a programme in the area of Geoscience Education and Training. The programme was organised under the status of a Working Group or a Commission.

  19. Development of a National Center for Hydrogen Technology. A Summary Report of Activities Completed at the National Center for Hydrogen Technology - Year 6

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Michael [Univ. of North Dakota, Grand Forks, ND (United States)

    2012-08-01

    The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology (NCHT) since 2005 under a Cooperative Agreement with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research on hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding for hydrogen-related projects ($24 million for projects in the NCHT, which includes federal and corporate partner development funds) involving more than 85 partners (27 with the NCHT). The NCHT Program's nine activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan that refers to realistic testing of technologies at adequate scale, process intensification, and contaminant control. A number of projects have been completed that range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in Year 6 of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

  20. Information Technologies in the System of Military Engineer Training of Cadets

    Science.gov (United States)

    Khizhnaya, Anna V.; Kutepov, Maksim M.; Gladkova, Marina N.; Gladkov, Alexey V.; Dvornikova, Elena I.

    2016-01-01

    The necessity of enhancement of the information component in the military engineer training is determined by the result of a comparative analysis of global and national engineering education standards. The purpose is to substantiate the effectiveness and relevance of applying information technology in the system of military engineer training of…

  1. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Rogers, Adam Zachary; Simmons, R. F.; Palethorpe, S. J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  2. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program, FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; Rogers, A.Z.; McCray, J.A.; Simmons, R.F.; Palethorpe, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  3. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Kirkham, Robert John; Pao, Jenn Hai; Hinckley, Steve Harold

    1999-10-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.

  4. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    A. K. Herbst; J. A. McCray; R. J. Kirkham; J. Pao; S. H. Hinckley

    1999-09-30

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.

  5. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-2000 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Kirkham, Robert John; Pao, Jenn Hai; Argyle, Mark Don; Lauerhass, Lance; Bendixsen, Carl Lee; Hinckley, Steve Harold

    2000-11-01

    The Low-Activity Waste Process Technology Program anticipated that grouting will be used for disposal of low-level and transuranic wastes generated at the Idaho Nuclear Technology Engineering Center (INTEC). During fiscal year 2000, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed using silica gel and other absorbents to solidify sodium-bearing wastes. A feasibility study and conceptual design were completed for the construction of a grout pilot plant for simulated wastes and demonstration facility for actual wastes.

  6. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-2000 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; McCray, J.A.; Kirkham, R.J.; Pao, J.; Argyle, M.D.; Lauerhass, L.; Bendixsen, C.L.; Hinckley, S.H.

    2000-10-31

    The Low-Activity Waste Process Technology Program anticipated that grouting will be used for disposal of low-level and transuranic wastes generated at the Idaho Nuclear Technology Engineering Center (INTEC). During fiscal year 2000, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed using silica gel and other absorbents to solidify sodium-bearing wastes. A feasibility study and conceptual design were completed for the construction of a grout pilot plant for simulated wastes and demonstration facility for actual wastes.

  7. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center, 2

    Science.gov (United States)

    Gold, H. C. (Editor); Moore, A. M.; Dodd, B.; Dittmar, V.

    1971-01-01

    The clientele served by the Technology Use Studies Center (TUSC) is updated. Manufacturing leads the list of client firms. The standard industrial classification (SIC) range of these firms is broad. Substantial numbers of college and university faculties are using TUSC services. Field operations inherent in the functions of dissemination and assistance are reviewed. Increasing emphasis among clientele is on environmental concerns and management. A record is provided of the institutions contacted and the extent of TUSC involvement with them, as well as TUSC's cooperation with agencies and organizations. The impact of TUSC and the NASA-sponsored Technology Utilization Program on other public agencies is discussed.

  8. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program, FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; Rogers, A.Z.; McCray, J.A.; Simmons, R.F.; Palethorpe, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  9. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; McCray, J.A.; Rogers, A.Z.; Simmons, R.F.; Palethrope, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  10. Designing Excellence and Quality Model for Training Centers of Primary Health Care: A Delphi Method Study

    Directory of Open Access Journals (Sweden)

    Jafar-Sadegh TABRIZI

    2015-10-01

    Full Text Available Background: Excellence and quality models are comprehensive methods for improving the quality of healthcare. The aim of this study was to design excellence and quality model for training centers of primary health care using Delphi method. Methods: In this study, Delphi method was used. First, comprehensive information were collected using literature review. In extracted references, 39 models were identified from 34 countries and related sub-criteria and standards were extracted from 34 models (from primary 39 models. Then primary pattern including 8 criteria, 55 sub-criteria, and 236 standards was developed as a Delphi questionnaire and evaluated in four stages by 9 specialists of health care system in Tabriz and 50 specialists from all around the country.Results: Designed primary model (8 criteria, 55 sub-criteria, and 236 standards were concluded with 8 criteria, 45 sub-criteria, and 192 standards after 4 stages of evaluations by specialists. Major criteria of the model are leadership, strategic and operational planning, resource management, information analysis, human resources management, process management, costumer results, and functional results, where the top score was assigned as 1000 by specialists. Functional results had the maximum score of 195 whereas planning had the minimum score of 60. Furthermore the most and the least sub-criteria was for leadership with 10 sub-criteria and strategic planning with 3 sub-criteria, respectively. Conclusion: The model that introduced in this research has been designed following 34 reference models of the world. This model could provide a proper frame for managers of health system in improving quality. Keywords: Quality model, Excellence model, Training centers, Primary cares, Iran

  11. The Preparedness and Emergency Response Learning Centers: advancing standardized evaluation of public health preparedness and response trainings.

    Science.gov (United States)

    Hites, Lisle S; Sass, Marcia M; D'Ambrosio, Luann; Brown, Lisa M; Wendelboe, Aaron M; Peters, Karen E; Sobelson, Robyn K

    2014-01-01

    The Centers for Disease Control and Prevention funded Preparedness and Emergency Response Learning Centers (PERLCs) across the United States. The PERLCs provide training to state, local, and tribal public health organizations to meet workforce development needs in the areas of public health preparedness and response, specialized training, education, and consultation. Using Donald Kirkpatrick's training evaluation model, the PERLC network established 4 evaluation working groups that developed evaluation criteria to address each level of the model. The purpose of the working groups was to inform and promote center-level and program-level evaluation across the PERLC network; identify common training evaluation methods and measures; and share materials, resources, and lessons learned with state, local, and tribal public health organizations for potential replication. The evaluation of education and training, irrespective of its modality (eg, in-person, online, webinars, seminars, symposia) can be accomplished using Kirkpatrick's 4-level taxonomy. The 4 levels aim to measure the following aspects of training programs: (1) trainees' reaction; (2) knowledge acquired, skills improved, or attitudes changed; (3) behavior changed; and (4) results or impact. To successfully evaluate emergency preparedness training, drills and exercises, it is necessary to understand the fundamental tenets of each level and how to apply each to measure training outcomes. The PERLC evaluators have adopted the basic schema of Kirkpatrick's 4-level model and applied its structure to a wide variety of preparedness and emergency response training and related activities. The PERLC evaluation working groups successfully developed and tested survey methods and instruments for each of the 4 levels of Kirkpatrick's training evaluation model. Each can be used for replication by state, local, and tribal public health professionals.

  12. Video disc technology - A new approach to the design of training devices

    Science.gov (United States)

    Levin, S.; Fletcher, J. D.

    It appears that the productivity limits of current training technology have been reached, and that revolutionary new techniques are needed to break through existing constraints. It is pointed out that video disk technology is one of the most promising sources of these new techniques. At the heart of this technology is the capability to access tens of thousands of color images, including stereo sound, in very short time. Attention is given to four new ideas for training applications which use video disk technology. Optical video disk antecedents are considered along with aspects of optical video disk technology, interactive movies, surrogate travel, electronic libraries, and simulation. A number of issues concerning the use of video disks by the training community are also investigated.

  13. Pre-clinical pharmacology training in a student-centered veterinary curriculum.

    Science.gov (United States)

    Buur, Jennifer L

    2009-01-01

    The appropriate use of therapeutics is important to both human and animal health. The field of pharmacology is rapidly progressing such that it is impossible to convey to students every possible piece of information they will need to know throughout their veterinary careers. Instead, it is more important to train students for lifelong and self-directed learning so that they will be able to adapt to the ever-changing pharmaceutical landscape. Western University of Health Sciences College of Veterinary Medicine teaches pharmacology using a student-centered and problem-based curriculum designed to teach students not only the basics of pharmacology and clinical pharmacology, but also the personal skills needed to continue to learn beyond their formal education. The aim of this manuscript is to document the pharmacology curriculum during phase I of the veterinary curriculum. Review of the graduating class of 2010's exposure to pharmacology learning issues reveals broad-based coverage of major functional and mechanistic drug classes as well as peripheral topics, including pharmacokinetics, legal and ethical issues, and dosing regimen calculations. Previous classes have scored well on external examinations leading to a belief that this pharmacology curriculum provides adequate training for graduate veterinarians.

  14. Computerized training in breast self-examination: a test in a community health center.

    Science.gov (United States)

    Reis, Janet; Trockel, Mickey; King, Tyreasa; Remmert, David

    2004-01-01

    Fifty-eight women recruited from a community health center completed either a brief interactive multimedia training program on breast self-examination using a breast model and computer guided feedback on accuracy of lump detection or read a National Cancer Institute pamphlet on breast self-examination and breast lumps. Women using the computer program as compared to the pamphlet group reported a higher sense of self-efficacy for being able to perform a breast self-examination immediately after their educational session and 1 month later. However, the increase in self-efficacy for the computer group diminished over 4 weeks, underscoring the importance of an environment that reminds and reinforces learning for women about the performance of regular breast self-examination. The increase in sense of self-efficacy to perform breast self-examination with roughly 20 minutes of computer-based training and the partial maintenance of that self-efficacy 30 days later suggests the utility of incorporating short, focused interventions in busy primary healthcare settings.

  15. TABADO: "Evaluation of a smoking cessation program among Adolescents in Vocational Training Centers": Study protocol

    Directory of Open Access Journals (Sweden)

    Martinet Yves

    2009-11-01

    Full Text Available Abstract Background Most of the efforts to reduce teenagers' tobacco addiction have focused on smoking prevention and little on smoking cessation. A smoking cessation program (TABADO study, associating pharmacologic and cognitive-behavioural strategy, on a particularly vulnerable population (vocational trainees, was developed. This study aims to evaluate the efficacy of the program which was offered to all smokers in a population aged 15 to 20 years in Vocational Training Centers (VTC. This paper presents the TABADO study protocol. Methods The study is quasi-experimental, prospective, evaluative and comparative and takes place during the 2 years of vocational training. The final population will be composed of 2000 trainees entering a VTC in Lorraine, France, during the 2008-2009 period. The intervention group (1000 trainees benefited from the TABADO program while no specific intervention took place in the "control" group (1000 trainees other than the treatment and education services usually available. Our primary outcome will be the tobacco abstinence rate at 12 months. Discussion If the program proves effective, it will be a new tool in the action against smoking in populations that have been seldom targeted until now. In addition, the approach could be expanded to other young subjects from socially disadvantaged backgrounds in the context of a public health policy against smoking among adolescents. Trial registration Clinical trial identification number is NTC00973570.

  16. Evaluation of the Microvascular Research Center Training Program for Assessing Microsurgical Skills in Trainee Surgeons

    Directory of Open Access Journals (Sweden)

    Seiji Komatsu

    2013-05-01

    Full Text Available Background  We established the Microvascular Research Center Training Program (MRCPto help trainee surgeons acquire and develop microsurgical skills. Medical students wererecruited to undergo theMRCP to assessthe effectiveness oftheMRCP fortrainee surgeons.Methods  Twenty-two medical students with no prior microsurgical experience, who completed the course from2005 to 2012,were included. TheMRCP comprises 5 stages oftraining,each with specific passing requirements. Stages 1 and 2 involve anastomosing silicone tubesand blood vessels of chicken carcasses,respectively,within 20minutes. Stage 3 involves anastomosing the femoral artery and vein oflive ratswith a 1-day patency rate of > 80%. Stage4 requires replantation of free superficial inferior epigastric artery flaps in rats with a 7-daysuccessrate of > 80%. Stage 5 involvessuccessful completion of one case ofratreplantation/transplantation. We calculated the passing rate for each stage and recorded the number ofanastomosesrequired to passstages 3 and 4.Results  The passing rates were 100% (22/22 for stages 1 and 2, 86.4% (19/22 for stage3, 59.1% (13/22 for stage 4, and 55.0% (11/20 for stage 5. The number of anastomosesperformedwas 17.2± 12.2 in stage 3 and 11.3± 8.1 in stage 4.Conclusions  Majority ofthemedicalstudentswho undertook theMRCP acquired basicmicrosurgicalskills. Thus,we conclude thatthe MRCP is an effective microsurgery training programfortrainee surgeons.

  17. Broadening opportunities for job seekers with disabilities: strategies to effectively provide assistive technology in One-Stop centers.

    Science.gov (United States)

    Timmons, Jaimie Ciulla; Boeltzig, Heike; Fesko, Sheila Lynch; Cohen, Allison; Hamner, Doris

    2007-01-01

    The Workforce Investment Act (WIA) of 1998 mandates that partners in the One-Stop Career Center (One-Stop) system be prepared to serve a diverse customer base, including job seekers with disabilities. For many such individuals, effective service delivery depends in part on the existence of appropriate and efficient assistive technology (AT) options. This article presents challenges experienced by One-Stop partners related to AT provision as well as strategies for providing effective AT support. Findings from case study research conducted in several One-Stops across the country revealed three strategies that have enhanced employment services and addressed barriers. These are (a) an accurate assessment of AT needs, (b) staff training and practice using the equipment, and (c) the ability to make the most of limited financial resources. Implications for the most efficient ways to provide AT options are discussed.

  18. Military aircraft and missile technology at the Langley Research Center: A selected bibliography

    Science.gov (United States)

    Maddalon, D. V.

    1980-01-01

    A compilation of reference material is presented on the Langley Research Center's efforts in developing advanced military aircraft and missile technology over the past twenty years. Reference material includes research made in aerodynamics, performance, stability, control, stall-spin, propulsion integration, flutter, materials, and structures.

  19. Research and technology activities at Ames Research Center's Biomedical Research Division

    Science.gov (United States)

    Martello, N.

    1985-01-01

    Various research and technology activities at Ames Research Center's Biomedical Research Division are described. Contributions to the Space Administration's goals in the life sciences include descriptions of research in operational medicine, cardiovascular deconditioning, motion sickness, bone alterations, muscle atrophy, fluid and electrolyte changes, radiation effects and protection, behavior and performance, gravitational biology, and life sciences flight experiments.

  20. The Clean Energy Manufacturing Analysis Center (CEMAC): Providing Analysis and Insights on Clean Technology Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Nicholi S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-28

    The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

  1. Technology Can Help Young Children Succeed. PACER Center ACTion Information Sheets: PHP-c70

    Science.gov (United States)

    PACER Center, 2014

    2014-01-01

    Parents of young children with disabilities are discovering that carefully selected computer software and mobile apps can provide many benefits such as improved self-esteem, a longer attention span, and inclusion among family and other children that help their children succeed at home and in school. PACER's Simon Technology Center (STC) can help…

  2. NASA Lewis Research Center low-gravity fluid management technology program

    Science.gov (United States)

    Aydelott, J. C.; Carney, M. J.; Hochstein, J. I.

    1985-01-01

    A history of the Lewis Research Center in space fluid management technology program is presented. Current programs which include numerical modeling of fluid systems, heat exchanger/radiator concept studies, and the design of the Cryogenic Fluid Management Facility are discussed. Recent analytical and experimental activities performed to support the Shuttle/Centaur development activity are highlighted.

  3. Calcined Waste Storage at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    M. D. Staiger

    2007-06-01

    This report provides a quantitative inventory and composition (chemical and radioactivity) of calcined waste stored at the Idaho Nuclear Technology and Engineering Center. From December 1963 through May 2000, liquid radioactive wastes generated by spent nuclear fuel reprocessing were converted into a solid, granular form called calcine. This report also contains a description of the calcine storage bins.

  4. Technology Can Help Young Children Succeed. PACER Center ACTion Information Sheets: PHP-c70

    Science.gov (United States)

    PACER Center, 2014

    2014-01-01

    Parents of young children with disabilities are discovering that carefully selected computer software and mobile apps can provide many benefits such as improved self-esteem, a longer attention span, and inclusion among family and other children that help their children succeed at home and in school. PACER's Simon Technology Center (STC) can help…

  5. Mode 2 in action. Working across sectors to create a Center for Humanities and Technology

    NARCIS (Netherlands)

    Wyatt, S.M.E.

    2015-01-01

    This article examines recent developments in Amsterdam to establish a Center for Humanities and Technology (CHAT). The project is a collaboration between public research institutions and a private partner. To date, a White Paper has been produced that sets out a shared research agenda addressing bot

  6. Technology and Student Learning: Toward a Learner-Centered Teaching Model

    Science.gov (United States)

    Keengwe, Jared; Onchwari, Grace; Onchwari, Jacqueline

    2009-01-01

    There is need to reform teacher education programs through the creation of active learning environments that support and improve the depth and scope of student learning. Specifically, teachers should provide intellectually powerful, learner-centered, and technology-rich environments for students without undermining sound pedagogical practices.…

  7. Functional information technology in geometry-graphic training of engineers

    OpenAIRE

    Irina D. Stolbova; Evgeniya P. Aleksandrova; Konstantin G. Nosov

    2017-01-01

    In the last decade, information technology fundamentally changed the design activity and made significant adjustments to the development of design documentation. Electronic drawings and 3d-models appeared instead of paper drawings and the traditional form of the design documentation. Geometric modeling of 3d-technology has replaced the graphic design technology. Standards on the electronic models are introduced. Electronic prototypes and 3d-printing contribute to the spread of rapid prototypi...

  8. Model of training of computer science teachers by means of distant education technologies

    Directory of Open Access Journals (Sweden)

    Т А Соловьева

    2009-03-01

    Full Text Available Training of future computer science teachers in conditions of informatization of education is analyzed. Distant educational technologies (DET and traditional process of training, their advantages and disadvantages are considered, active functions of DET as the basis of the model of training by means of DET is stressed. It is shown that mixed education combining both distant ant traditional technologies takes place on the basis of the created model. Practical use of the model is shown on the example of the course «Recursion» for future computer science teachers.

  9. Development of a national center for hydrogen technology. A summary report of activities completed at the national center hydrogen technology from 2005 to 2010

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Michael J. [Univ. of North Dakota, Grand Forks, ND (United States)

    2011-06-01

    The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology® (NCHT®) since 2005 under a Cooperative Agreement with the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research of hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding of hydrogen-related projects ($20 million for the NCHT project which includes federal and corporate development partner funds) involving more than 85 partners (27 with the NCHT). The NCHT project's 19 activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan. A number of projects have been completed which range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified to transportation-grade quality in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in the first 5 years of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

  10. Interaction Technology for Collective and Psychomotor Training in Sports

    DEFF Research Database (Denmark)

    Fogtmann, Maiken Hillerup; Grønbæk, Kaj; Ludvigsen, Martin

    2011-01-01

    The paper introduces a novel pervasive computing based training concept aimed at elite sports. The concept goes beyond interactive sports equipments that are either individual or multiuser with a common display requiring participant's focus. These types of equipments are unable to support...... the kinesthetic empathic elements inherently present within open sports. To put focus on collective training, we draw inspiration from Kinesthetic Empathy Interaction in designing the collective training equipment, TacTowers. The TacTowers prototype is aimed at supporting athletes, particularly team handball...... element in the interaction, specific to the sport. We present and discuss results of tests with two elite handball teams. We see prospects for applying the concept for entertaining movement-stimulating games at schools or leisure sports environments....

  11. Review of ultra-high density optical storage technologies for big data center

    Science.gov (United States)

    Hao, Ruan; Liu, Jie

    2016-10-01

    In big data center, optical storage technologies have many advantages, such as energy saving and long lifetime. However, how to improve the storage density of optical storage is still a huge challenge. Maybe the multilayer optical storage technology is the good candidate for big data center in the years to come. Due to the number of layers is primarily limited by transmission of each layer, the largest capacities of the multilayer disc are around 1 TB/disc and 10 TB/ cartridge. Holographic data storage (HDS) is a volumetric approach, but its storage capacity is also strictly limited by the diffractive nature of light. For a holographic disc with total thickness of 1.5mm, its potential capacities are not more than 4TB/disc and 40TB/ cartridge. In recent years, the development of super resolution optical storage technology has attracted more attentions. Super-resolution photoinduction-inhibition nanolithography (SPIN) technology with 9 nm feature size and 52nm two-line resolution was reported 3 years ago. However, turning this exciting principle into a real storage system is a huge challenge. It can be expected that in the future, the capacities of 10TB/disc and 100TB/cartridge can be achieved. More importantly, due to breaking the diffraction limit of light, SPIN technology will open the door to improve the optical storage capacity steadily to meet the need of the developing big data center.

  12. Training Technology Handbook for System Acquisition Planners: Preliminary Version.

    Science.gov (United States)

    1981-09-01

    existing system data. to the new system. The check- list in Table 3 is an aid to this process. What are the training Training resource data of a simi...given design concept. place a Table 3 and the procedures for using the table are Intended check in the "common (C)" column to indicate that the as an aid ...ION ALL COINTROLS XIAPNL IN VIH €1U11T- OPTIMALLY L OCALIs T-I E ElsA IEI MALFUNCTIOW TO THE CO--- INRT o I*LEVEL TWDE O IS EDS TEAR DOE %AIll ow

  13. The effect of aerobic exercise training on work ability of midwives working in health care centers

    Directory of Open Access Journals (Sweden)

    Zahra Abedian

    2017-01-01

    Full Text Available Background & aim: Maintaining and improving the work ability are important social goals, which challenge the health care and rehabilitation systems as well as health providers. The physical and mental health status affect the work ability. Regarding this, the current study aimed to investigate the effect of aerobic training on the work ability of the midwives in the health care centers of Mashhad, Iran in 2013. Methods: This randomized clinical trial was conducted on 60 midwives working in the health centers of Mashhad, Iran, using purposeful sampling method. The health care centers were selected randomly, and then assigned into the intervention and control groups. Subsequently, the intervention group performed aerobic exercise for 24 sessions. Data collection was performed using the work ability index and the Bruce test (to compare the fitness of the participants at the pre- and post-intervention stages. For data analysis, the two-way ANOVA, Mann-Whitney U, and Chi-square tests as well as independent and paired sample t-tests were employed, using SPSS version 19. The P-value less than 0.05 was considered statistically significant. Results: According to the results of the study, the mean score of work ability was significantly higher in the intervention group than that in the control group (40.5±4.9 vs. 36.4± 5.3, respectively; P=0.004. Furthermore, there was a significant difference between the two groups regarding the two variables including work ability compared with life time best (P

  14. Technology: Education and Training Needs of Older Adults

    Science.gov (United States)

    Huber, Lesa; Watson, Carol

    2014-01-01

    The impact of the global aging of the population on social, economic, political, and health care institutions is unequaled. Parallel to this, evolving developments in technology promise opportunities for sales and product development to support positive aging. Older adults are excited to utilize technologies that they perceive as practical.…

  15. Technology: Education and Training Needs of Older Adults

    Science.gov (United States)

    Huber, Lesa; Watson, Carol

    2014-01-01

    The impact of the global aging of the population on social, economic, political, and health care institutions is unequaled. Parallel to this, evolving developments in technology promise opportunities for sales and product development to support positive aging. Older adults are excited to utilize technologies that they perceive as practical.…

  16. Reaching Families through Social Media: Training Extension Professionals to Implement Technology in Their Work

    Directory of Open Access Journals (Sweden)

    Kim Allen

    2014-06-01

    Full Text Available Cooperative Extension professionals have a long tradition of helping improve the lives of the families they serve by sharing research-based information. More than ever, families are getting their information online, creating a need for Extension professionals to deliver content via technology. This article describes a training designed to teach Extension professionals ways to increase their reach to families through the use of technology in their work. Extension professionals attended an 8-hour, face-to-face training in which they completed a pre, post, and follow-up survey. Results from the training indicated that this training was effective in changing attitudes about the usefulness of technology and increasing their use of social media to reach families.

  17. Teacher In-Service Training and the Incorporation of Technology into Teaching.

    Science.gov (United States)

    Schnackenberg, Heidi L.

    This paper describes the teacher inservice training that was developed as the result of a technology needs assessment at two elementary schools in Quebec. The workshop was developed as an initial vehicle for enabling teachers to incorporate technology into their teaching. The six days of the workshop are sketched, and the materials used in the…

  18. Development of a Training Program for Enhancement of Technology Competencies of University Lecturers

    Science.gov (United States)

    Cruthaka, Chomsupak; Pinngern, Ouen

    2016-01-01

    The objectives were: (1) the components of the technology competencies of university lecturers were studied. The researchers also described and analyzed (2) the development of a training program for enhancement of the technology competencies of these lecturers. Also, the researchers evaluated (3) the program they had constructed. The sample…

  19. The Effect of the Implementation of Advanced Manufacturing Technologies on Training in the Manufacturing Sector

    Science.gov (United States)

    Castrillon, Isabel Dieguez; Cantorna, Ana I. Sinde

    2005-01-01

    Purpose: The aim of this article is to gain insight into some of the factors that determine personnel-training efforts in companies introducing advanced manufacturing technologies (AMTs). The study provides empirical evidence from a sector with high rates of technological modernisation. Design/methodology/approach: "Ad hoc" survey of 90…

  20. Assistive Technology in Teacher-Training Programs: A National and International Perspective

    Science.gov (United States)

    Safhi, Mohammad Y.; Zhou, Li; Smith, Derrick W.; Kelley, Pat

    2009-01-01

    The study presented here investigated how assistive technology training is being integrated into teacher preparation programs for teachers of students with visual impairments worldwide. The survey investigated how knowledge of assistive technology is addressed (whether in specific courses or by embedding the content throughout the program), what…

  1. Factors Influencing the Acceptance of Collaboration Technology within the Context of Virtual Teamwork Training

    Science.gov (United States)

    Godin, Joy J.; Leader, Lars F.

    2013-01-01

    The purpose of this study was to identify the factors that influence electronic collaboration technology acceptance and predicted usage for virtual team collaboration projects in higher education courses. The research combined the unified theory of acceptance and usage of technology (UTAUT) with a virtual team-training model. All 108 participants…

  2. The Effect of the Implementation of Advanced Manufacturing Technologies on Training in the Manufacturing Sector

    Science.gov (United States)

    Castrillon, Isabel Dieguez; Cantorna, Ana I. Sinde

    2005-01-01

    Purpose: The aim of this article is to gain insight into some of the factors that determine personnel-training efforts in companies introducing advanced manufacturing technologies (AMTs). The study provides empirical evidence from a sector with high rates of technological modernisation. Design/methodology/approach: "Ad hoc" survey of 90…

  3. Final priority; National Institute on Disability and Rehabilitation Research--Disability and Rehabilitation Research Projects and Centers Program--Rehabilitation Research Training Centers. Final priority.

    Science.gov (United States)

    2013-05-20

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority for a Rehabilitation Research Training Center (RRTC) on Disability Statistics and Demographics under the Disability and Rehabilitation Research Projects and Centers program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). The Assistant Secretary may use this priority for a competition in fiscal year (FY) 2013 and later years. We take this action to focus research attention on areas of national need. We intend to use this priority to improve outcomes for individuals with disabilities.

  4. Social Relations of Science and Technology: perceptions of teachers of technical training, PARFOR course participants

    Directory of Open Access Journals (Sweden)

    Manuella Candéo

    2014-12-01

    Full Text Available We present in this paper a study on the perceptions of teachers of technical training, course participants (PARFOR National Plan for Training Teachers of Basic Education , offered by the Federal Technological University of Paraná, Campus Ponta Grossa (PG - UTFPR on the social relations of science and technology. The study conducted with 15 teachers from various disciplines. The methodological approach was quantitative research , the instrument of data collection was based questionnaire with open questions . The main results show that the vast majority of teachers had a very narrow view about science and technology , consider that the scientific and technological development always bring benefits to its own population of traditional / classic , positivist view. The need to promote reflection on social issues of science and technology in education technology in order to train professionals aware of their responsibilities as citizens in a highly technological age was observed. It is emphasized that these are recorded in the master's thesis entitled Scientific and Technological Literacy (ACT by Focus Science, Technology and Society (STS from commercial films of the University Program Graduate School of Science and Technology Tecnológica Federal do Paraná ( UTFPR Campus Ponta Grossa, Brazil.

  5. Programming Programmable Logic Controller. High-Technology Training Module.

    Science.gov (United States)

    Lipsky, Kevin

    This training module on programming programmable logic controllers (PLC) is part of the memory structure and programming unit used in a packaging systems equipment control course. In the course, students assemble, install, maintain, and repair industrial machinery used in industry. The module contains description, objectives, content outline,…

  6. Information technology and its role in anaesthesia training and continuing medical education.

    Science.gov (United States)

    Chu, Larry F; Erlendson, Matthew J; Sun, John S; Clemenson, Anna M; Martin, Paul; Eng, Reuben L

    2012-03-01

    Today's educators are faced with substantial challenges in the use of information technology for anaesthesia training and continuing medical education. Millennial learners have uniquely different learning styles than previous generations of students. These preferences distinctly incorporate the use of digital information technologies and social technologies to support learning. To be effective teachers, modern educators must be familiar with these new information technologies and understand how to use them for medical education. Examples of new information technologies include learning management systems, lecture capture, social media (YouTube, Flickr), social networking (Facebook), Web 2.0, multimedia (video learning triggers and point-of-view video) and mobile computing applications. The information technology challenges for educators in the twenty-first century include: (a) understanding how technology shapes the learning preferences of today's anaesthesia residents, (b) distinguishing between the function and properties of new learning technologies and (c) properly using these learning technologies to enhance the anaesthesia curriculum.

  7. Telemedicine & Advanced Technology Research Center (TATRC) Overview: Research Shaped to Meet Military Needs

    Science.gov (United States)

    2011-06-01

    Technology BHSAI Medical Modeling & Simulation JPC Program Execution National ProgramsLogistics Security, Plans, Training, Travel Innovative and...SBIR CSI 400 450 Demonstrations & Field T-Med (P8) JPC -1 Other JPC Execution 5 6 & 8 300 350 Demonstrations , , , 200 250 & Field T-Med (P8...Other JPC Execution 100 150 Congressional Special Appropriations – RDT&E 0 50 SBIR JPC1 UNCLASSIFIED June 2011 Key Sources: CSI, AAMTI(P8), SBIR/STTR

  8. Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

    Science.gov (United States)

    1999-01-01

    Center Director Roy Bridges stops to pet one of the dogs that serves with Canine Companions for Independence, a vendor displaying its capabilities at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Standing at the right is Carol Cavanaugh, with KSC Public Services; behind Bridges is Nancie Strott (left), a multi-media specialist with Dynacs and chairperson of the Fair, and Sterling Walker (right), director of Engineering Development and chairman of DAAWG. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the other vendors participating are Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

  9. Implications of Information Technology on the Training of Library ...

    African Journals Online (AJOL)

    The Library and Information Science Education is imparted through distance education .... social media, web design and development, etc. .... only six deal with information technology, focusing on the fields of telecommunication, information.

  10. Access, attitudes and training in information technologies and ...

    African Journals Online (AJOL)

    mation technologies and evidence-based medicine among medical students at University of Zimbabwe College of Health .... veloping new curriculums and replacing the outdated IT .... clinical and nursing students in a Nigerian teaching hos-.

  11. A way of integrating technological tools into teacher training

    National Research Council Canada - National Science Library

    Susana Molina Martín

    2009-01-01

    .... With the innovation described here we attempted to use technological tools with our students as a positive stimulus during the teaching and learning processes which would enable them to learn more effectively...

  12. Enhancing emergency care in low-income countries using mobile technology-based training tools.

    Science.gov (United States)

    Edgcombe, Hilary; Paton, Chris; English, Mike

    2016-12-01

    In this paper, we discuss the role of mobile technology in developing training tools for health workers, with particular reference to low-income countries (LICs). The global and technological context is outlined, followed by a summary of approaches to using and evaluating mobile technology for learning in healthcare. Finally, recommendations are made for those developing and using such tools, based on current literature and the authors' involvement in the field.

  13. Integrated Personnel and Training Information for TRADOC System Managers (TSM): Technological GAPS

    Science.gov (United States)

    1980-02-01

    a technological gap was said to exist. In addition to technical reports, texts and handbooks, an extensive search was made of military publications...of, the handbook for TRADOC system managers (Kinton, 1979) and through interviews with TSMs and their staffs. For this report a " technological gap " is...personnel and training requirements are identified. A major technological gap that exists relative to these activities concerns our lack of knowledge

  14. Skill Training Using Adaptive Technology: A Better Way to Hover

    Science.gov (United States)

    2005-09-01

    existential graphs of Charles Sanders Peirce and the semantic networks of artificial intelligence. Meaning is expressed in a logically precise, humanly...Ciavarelli Human Factor Associates Charles N. Asbury Thought Wave LLC Alberto Y. Salinas, and Robert T. Hennessy Monterey Technologies, Inc. This...TASK NUMBER Charles N. Asbury (Thought Wave LLC), 206 Alberto Y. Salinas and Robert T. Hennessy 5e. WORK UNIT NUMBER (Monterey Technologies, Inc.) 7

  15. Completion of Green Building by Korea Institute of Energy Research - Energy{center_dot}Conservation{center_dot}Environmental Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Dong [Korea Institute of Energy Research, Taejon (Korea)

    2001-04-01

    Korea Institute of Energy Research (KIER), which was fully aware that the effective utilization of energy could not only save energy but also reduce the environmental pollution due to a combustion exhaust gas, has built and operated 'the Ultra Energy Saving Building' whose energy consumption was only a fifth of general buildings as a example. KIER has started to research the project for the technology development and spread of Green Building in 'Enertech 21' - the most important research program of 1994 year - and has constructed the central building of the Institute with only the current available technology since the early of 1997 year, via researches by a step. Finally, KIER held the ceremony for the completion of Green Building in March sixth. This building is not just the first green building in Korea but also the representative building of energy environment research center, which will be marked out for a model for the domestic construction and construction industry in future. Therefore, this building has functions of exhibition, publicity, education, and experimentation for the building researchers as well as the office and researching place that is original function of this building. 4 figs., 5 tabs.

  16. SLJ's Technology Survey 2006: New Technologies--Like Blogs and Wikis--Are Taking Their Place in the School Media Center

    Science.gov (United States)

    Brewer, Sally; Milam, Peggy

    2006-01-01

    This article presents findings from the School Library Journal's 2006 national technology survey that investigated the trend in today's library media centers. As this study demonstrates, technology continues to be a significant aspect of K-12 media centers. Despite restricted funding and schedules stretched to the limit, media specialists have…

  17. Handheld technology acceptance in radiologic science education and training programs

    Science.gov (United States)

    Powers, Kevin Jay

    The purpose of this study was to explore the behavioral intention of directors of educational programs in the radiologic sciences to adopt handheld devices to aid in managing student clinical data. Handheld devices were described to participants as a technology representing a class of mobile electronic devices including, but not limited to, personal digital assistants such as a Palm TX, Apple iPod Touch, Apple iPad or Hewlett Packard iPaq, and cellular or smartphones with third generation mobile capabilities such as an Apple iPhone, Blackberry or Android device. The study employed a non-experimental, cross-sectional survey design to determine the potential of adopting handheld technologies based on the constructs of Davis's (1989) Technology Acceptance Model. An online self-report questionnaire survey instrument was used to gather study data from 551 entry level radiologic science programs specializing in radiography, radiation therapy, nuclear medicine and medical sonography. The study design resulted in a single point in time assessment of the relationship between the primary constructs of the Technology Acceptance Model: perceived usefulness and perceived ease of use, and the behavioral intention of radiography program directors to adopt the information technology represented by hand held devices. Study results provide justification for investing resources to promote the adoption of mobile handheld devices in radiologic science programs and study findings serve as a foundation for further research involving technology adoption in the radiologic sciences.

  18. Research on the Crucial Technology in Virtual Training System of Engineering Equipment

    Directory of Open Access Journals (Sweden)

    Jiang Tianhe

    2013-02-01

    Full Text Available The virtual training system involves a large number of technical problems which affect the promotion and application in our country. In this work, several key techniques for the development of engineering equipment virtual training system are addressed. Firstly, the reconstruction method for three views of machine parts is proposed based on rapid 3D surface fitting as well as NURBS composite surface. Then, the interactive control techniques for the 3D visualization interactive assembly are studied in detail. The key technology of collision detection is also illuminated in the last part. The entire engineering equipment support training system, that includes structure expressing, principle demonstration, panoramic roaming, disassembly training as well as maintenance and repair training, is developed. This facilitates the trainees in learning the support training procedures step by step, and quickly improves their technical skills.

  19. Accelerated Adoption of Advanced Health Information Technology in Beacon Community Health Centers.

    Science.gov (United States)

    Jones, Emily; Wittie, Michael

    2015-01-01

    To complement national and state-level HITECH Act programs, 17 Beacon communities were funded to fuel community-wide use of health information technology to improve quality. Health centers in Beacon communities received supplemental funding. This article explores the association between participation in the Beacon program and the adoption of electronic health records. Using the 2010-2012 Uniform Data System, trends in health information technology adoption among health centers located within and outside of Beacon communities were explored using differences in mean t tests and multivariate logistic regression. Electronic health record adoption was widespread and rapidly growing in all health centers, especially quality improvement functionalities: structured data capture, order and results management, and clinical decision support. Adoption lagged for functionalities supporting patient engagement, performance measurement, care coordination, and public health. The use of advanced functionalities such as care coordination grew faster in Beacon health centers, and Beacon health centers had 1.7 times higher odds of adopting health records with basic safety and quality functionalities in 2010-2012. Three factors likely underlie these findings: technical assistance, community-wide activation supporting health information exchange, and the layering of financial incentives. Additional technical assistance and community-wide activation is needed to support the use of functionalities that are currently lagging. © Copyright 2015 by the American Board of Family Medicine.

  20. Forecasting the Financial Benefits of Quality-Based Electronics Manufacturing Training. Training and Development Research Center: Project Number Eight.

    Science.gov (United States)

    Prifrel, Robert J.; And Others

    The validity of the Training Benefit Forecasting Method (TBFM) in a quality-based electronics manufacturing organization was studied. Participants were approximately 75 people involved in the manual production of circuit boards in a division of Control Data Corporation. Five training options to reduce the number of defects produced during…

  1. Training Implications of Airborne Applications of Automated Speech Recognition Technology.

    Science.gov (United States)

    1980-10-01

    Coler , C. R. Automated speech recognition and man- computer interaction research at NASA Ames Research Center. In S. Harris (Ed.), Proceedings: Voice...Sons, Inc., 1964. 56 NAVTRAEQUIPCEN 80-D-0009-0155-1 Coler , C. R. Automated speech recognition and man- computer interaction research at NASA Ames

  2. Minimal Technologies Application Project, Hohenfels Training Area, Germany: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Zellmer, S.D.; Hinchman, R.R.; Johnson, D.O. [Argonne National Lab., IL (United States). Energy Systems Div.; Severinghaus, W.D. [Corps of Engineers, Champaign, IL (United States); Brent, J.J. [Army Construction Engineering Research Lab., Champaign, IL (United States)

    1991-12-01

    At the US Army Hohenfels Training Area in Germany, more than 30 years of continuous and intensive tactical training has caused extensive environmental damage because of the loss of vegetative cover and accelerated soil erosion. A project was conducted to evaluate the cost-effectiveness and relative benefits of various revegetation procedures. These procedures involved amendment and seedbed preparation options that were combined with three different durations of site closure. The point-intercept method was used to measure the types and amounts of vegetation established and changes in the vegetative community. Over three growing seasons, applications of fertilizer and seed increased the percent grass, legume, and total vegetative cover. The duration of site closure had no influence on the types or amounts of ground cover established. Materials made up only 10% of the total cost of the fertilization and seeding operations. The results of the research indicate that less expensive methods of amendment application should be evaluated. The data also show that site closure is not practical, economical, or necessary. The results of this project suggest that a regular maintenance program consisting of seeding and fertilization is required to maintain adequate vegetative cover and control erosion on tactical training areas.

  3. Implementation of efficient technologies application center; Implantacao de um centro de aplicacao de tecnologias eficientes

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Reynaldo S. da; Aguiar, Joao C.R.; Pinto Junior, Ary V.; Souza, Hamilton M. [Centro de Pesquisas de Energia Eletrica, Rio de Janeiro, RJ (Brazil). Programa de Sistemas de Distribuicao e Uso Eficiente de Energia Eletrica

    1997-12-31

    This paper describes the basic concept and the main activities at the Electric Technology Application Center (ETAC) placed at CEPEL. The aim of the center is presented, regarding issues such as: energy waste preventing, energy-efficient production processes and environmental protection. This work also presents the initial partnerships and the first ETAC products, according to three main areas: Industrial Commercial and Residential. (author) 3 refs., 1 fig., 1 tab.; e-mail: cref at fund.cepel.br; sigiliao at fund.cepel.br

  4. Sage grouse on the Yakima Training Center: A summary of studies conducted during 1989 and 1990

    Energy Technology Data Exchange (ETDEWEB)

    Eberhardt, L.E. (Pacific Northwest Lab., Richland, WA (USA)); Hofmann, L.A. (Yakima Training Center, WA (USA). Coe-Truman Technologies)

    1991-03-01

    A two-year study, sponsored by the U.S. Department of the Army and conducted by Pacific Northwest Laboratory, was initiated in 1989 to study sage grouse on the Yakima Training Center (YTC). The specific objectives of this study were (1) to obtain detailed information on the distribution and relative density of sage grouse on the YTC, (2) to identify movement and habitat use patterns of sage grouse on the YTC, (3) to identify crucial habitat for sage grouse on the YTC, and (4) to provide management recommendations. Sage grouse were selected for study because they are a US Fish and Wildlife Service candidate species for the threatened and endangered list in Washington, and because the YTC probably contains the largest population of sage grouse left on federally owned lands in this state. The locations of 11 sage grouse leks, or breeding grounds, were determined on the YTC during extensive spring helicopter surveys. The maximum number of sage grouse observed during ground surveys of these leks varied from 2 to 55 birds. One lek, located near Range 19, was probably used by 40 to 50% of the YTC sage grouse population. Fifteen years of counts of males on leks indicate that the YTC sage grouse population was most numerous during the early to mid 1980s. Since the mid-1980s, sage grouse numbers appear to have declined on the YTC and in other locations in Washington. Forty-six sage grouse (17 females and 29 males) were captured and fitted with radio transmitters during 1989 and 1990. Movements by these sage grouse were both erratic and large when compared with other studies. We believe that many of the atypical movements were in response to military training activities. Sage grouse appeared to seek out areas on the YTC where human disturbance was low. Recommendations are made for improving the management of grouse habitat.

  5. A study of advanced training technology: Emerging answers to tough questions

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This study reports the result of an extensive nationwide review of military, private sector, and other federal agencies and organizations that are implementing a wide variety of advanced training technologies. This report classifies the general categories of advanced training technologies found and provides an overview of each, including specific types and examples. In addition, the research findings present an organizational model for training development linking overall organizational maturity to readiness to implement specific kinds of advanced training technologies. It also presents proposed methods for selecting media, describes the organizations and the data gathered, and provides a summary of implementation success at each organization. This study is organized as a set of five topics. Each topic raises a number of important questions and provides complete or emerging answers. For organizations who have made advanced training selections, this study is a resource to benchmark their success with other organizations who have made similar selections. For new or developing training organizations, this study will help plan their future technology selections by comparing their level of organizational maturity to the documented experiences of similar organizations.

  6. Using Remote Communication Technology in Insulin Pump Training: A Feasibility Study.

    Science.gov (United States)

    Parks, Linda; Kim, Tae Youn

    2015-09-29

    This feasibility study was designed to examine if remote communication technology can be used in the technical training of an insulin pump in adults with diabetes who were familiar with insulin pump therapy. Surveys were emailed to 69 individuals who purchased an insulin pump and had been trained by the manufacturer's diabetes educators. In consultation with providers, participants were given the choice of receiving training in a face-to-face meeting or via remote communication technology. The survey consisted of 27 questions asking participants' characteristics, device proficiency, confidence, and their satisfaction with the insulin pump and the training method. Differences between the 2 groups were examined using bivariate analyses. There were 17 participants in the remote group and 20 participants in the face-to-face group. Participants had a mean age of 40.9 ± 14.3 years, had diabetes for 24.3 ± 13.8 years, and used an insulin pump for 9.8 ± 4.9 years. The participants in both groups were not statistically different in age, diabetes history, years on insulin pump, device proficiency, confidence, or satisfaction with the training method. The remote group reported less graduate-level education (P insulin pump training (P insulin pump therapy. Additional research is required to determine the effectiveness of the remote insulin pump training. © 2015 Diabetes Technology Society.

  7. A review of user-centered design for diabetes-related consumer health informatics technologies.

    Science.gov (United States)

    LeRouge, Cynthia; Wickramasinghe, Nilmini

    2013-07-01

    User-centered design (UCD) is well recognized as an effective human factor engineering strategy for designing ease of use in the total customer experience with products and information technology that has been applied specifically to health care information technology systems. We conducted a literature review to analyze the current research regarding the use of UCD methods and principles to support the development or evaluation of diabetes-related consumer health informatics technology (CHIT) initiatives. Findings indicate that (1) UCD activities have been applied across the technology development life cycle stages, (2) there are benefits to incorporating UCD to better inform CHIT development in this area, and (3) the degree of adoption of the UCD process is quite uneven across diabetes CHIT studies. In addition, few to no studies report on methods used across all phases of the life cycle with process detail. To address that void, the Appendix provides an illustrative case study example of UCD techniques across development stages.

  8. The Use of DOE Technologies at The World Trade Center Incident: Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    McCabe, B.; Kovach, J.; Carpenter, C.; Blair, D.

    2003-02-25

    In response to the attack of the World Trade Center (WTC) on September 11, 2001, the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) assembled and deployed a HAZMAT Emergency Management Team (Team) to the disaster site (Site). The response team consisted of a Certified Industrial Hygienist and a rotating team of industrial hygienists, safety professionals, and certified HAZMAT instructors. Through research funded by the Department of Energy (DOE) Office of Environmental Management (EM) and managed by the National Energy Technology Laboratory (NETL), the IUOE conducted human factors assessments on baseline and innovative technologies during real-world conditions and served as an advocate at the WTC disaster site to identify opportunities for the use and evaluation of DOE technologies. From this work, it is clear that opportunities exist for more DOE technologies to be made readily available for use in future emergencies.

  9. A Comparison of Innovative Training Techniques at the Defense Language Institute Foreign Language Center. Research Report 1426.

    Science.gov (United States)

    Bush, Brian J.

    A study evaluated the comparative training effectiveness of three language instruction methods: (1) suggestopedia, (2) the standard methodology used at the Defense Language Institute Foreign Language Center, a functional skill-building approach, and (3) a flexible-scheduling version of the standard methodology, with pacing based on group…

  10. Better Planning and Oversight Could Have Reduced Construction Delays and Costs at the Kabul Military Training Center

    Science.gov (United States)

    2011-10-26

    Representative CSTC-A Combined Security Transition Command - Afghanistan DNC Discrepancy and Non-Compliance DPW Department of Public Works ECC ECC...Discrepancy and Non-Compliance ( DNC ) log, stating that SIGAR Audit-12-2 Contractor Performance and Oversight / Kabul Military Training Center Page 15

  11. Whatever works: a systematic user-centered training protocol to optimize brain-computer interfacing individually.

    Directory of Open Access Journals (Sweden)

    Elisabeth V C Friedrich

    Full Text Available This study implemented a systematic user-centered training protocol for a 4-class brain-computer interface (BCI. The goal was to optimize the BCI individually in order to achieve high performance within few sessions for all users. Eight able-bodied volunteers, who were initially naïve to the use of a BCI, participated in 10 sessions over a period of about 5 weeks. In an initial screening session, users were asked to perform the following seven mental tasks while multi-channel EEG was recorded: mental rotation, word association, auditory imagery, mental subtraction, spatial navigation, motor imagery of the left hand and motor imagery of both feet. Out of these seven mental tasks, the best 4-class combination as well as most reactive frequency band (between 8-30 Hz was selected individually for online control. Classification was based on common spatial patterns and Fisher's linear discriminant analysis. The number and time of classifier updates varied individually. Selection speed was increased by reducing trial length. To minimize differences in brain activity between sessions with and without feedback, sham feedback was provided in the screening and calibration runs in which usually no real-time feedback is shown. Selected task combinations and frequency ranges differed between users. The tasks that were included in the 4-class combination most often were (1 motor imagery of the left hand (2, one brain-teaser task (word association or mental subtraction (3, mental rotation task and (4 one more dynamic imagery task (auditory imagery, spatial navigation, imagery of the feet. Participants achieved mean performances over sessions of 44-84% and peak performances in single-sessions of 58-93% in this user-centered 4-class BCI protocol. This protocol is highly adjustable to individual users and thus could increase the percentage of users who can gain and maintain BCI control. A high priority for future work is to examine this protocol with severely

  12. Whatever works: a systematic user-centered training protocol to optimize brain-computer interfacing individually.

    Science.gov (United States)

    Friedrich, Elisabeth V C; Neuper, Christa; Scherer, Reinhold

    2013-01-01

    This study implemented a systematic user-centered training protocol for a 4-class brain-computer interface (BCI). The goal was to optimize the BCI individually in order to achieve high performance within few sessions for all users. Eight able-bodied volunteers, who were initially naïve to the use of a BCI, participated in 10 sessions over a period of about 5 weeks. In an initial screening session, users were asked to perform the following seven mental tasks while multi-channel EEG was recorded: mental rotation, word association, auditory imagery, mental subtraction, spatial navigation, motor imagery of the left hand and motor imagery of both feet. Out of these seven mental tasks, the best 4-class combination as well as most reactive frequency band (between 8-30 Hz) was selected individually for online control. Classification was based on common spatial patterns and Fisher's linear discriminant analysis. The number and time of classifier updates varied individually. Selection speed was increased by reducing trial length. To minimize differences in brain activity between sessions with and without feedback, sham feedback was provided in the screening and calibration runs in which usually no real-time feedback is shown. Selected task combinations and frequency ranges differed between users. The tasks that were included in the 4-class combination most often were (1) motor imagery of the left hand (2), one brain-teaser task (word association or mental subtraction) (3), mental rotation task and (4) one more dynamic imagery task (auditory imagery, spatial navigation, imagery of the feet). Participants achieved mean performances over sessions of 44-84% and peak performances in single-sessions of 58-93% in this user-centered 4-class BCI protocol. This protocol is highly adjustable to individual users and thus could increase the percentage of users who can gain and maintain BCI control. A high priority for future work is to examine this protocol with severely disabled users.

  13. Career and Technology Center Guides Students in Real-Life Careers | Poster

    Science.gov (United States)

    By Carolynne Keenan, Contributing Writer Frederick County Public School students have a unique opportunity—a chance to get a real-world, hands-on experience in biomedical science and biotechnology before they even graduate from high school, thanks to the Frederick County Career and Technology Center (CTC). Several years ago, the CTC established its biomedical sciences program with a curriculum from Project Lead the Way (PLTW), a nonprofit, nationwide developer of science, technology, engineering, and mathematics (STEM) education in elementary, middle, and high schools.

  14. Calcine Waste Storage at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    Staiger, Merle Daniel; M. C. Swenson

    2005-01-01

    This report documents an inventory of calcined waste produced at the Idaho Nuclear Technology and Engineering Center during the period from December 1963 to May 2000. The report was prepared based on calciner runs, operation of the calcined solids storage facilities, and miscellaneous operational information that establishes the range of chemical compositions of calcined waste stored at Idaho Nuclear Technology and Engineering Center. The report will be used to support obtaining permits for the calcined solids storage facilities, possible treatment of the calcined waste at the Idaho National Engineering and Environmental Laboratory, and to ship the waste to an off-site facility including a geologic repository. The information in this report was compiled from calciner operating data, waste solution analyses and volumes calcined, calciner operating schedules, calcine temperature monitoring records, and facility design of the calcined solids storage facilities. A compact disk copy of this report is provided to facilitate future data manipulations and analysis.

  15. Delivering health information services and technologies to urban community health centers: the Chicago AIDS Outreach Project.

    Science.gov (United States)

    Martin, E R; McDaniels, C; Crespo, J; Lanier, D

    1997-10-01

    Health professionals cannot address public health issues effectively unless they have immediate access to current biomedical information. This paper reports on one mode of access, the Chicago AIDS Outreach Project, which was supported by the National Library of Medicine through outreach awards in 1995 and 1996. The three-year project is an effort to link the programs and services of the University of Illinois at Chicago Library of the Health Sciences and the Midwest AIDS Training and Education Center with the clinic services of community-based organizations in Chicago. The project was designed to provide electronic access to AIDS-related information for AIDS patients, the affected community, and their care givers. The project also provided Internet access and training and continued access to library resources. The successful initiative suggests a working model for outreach to health professionals in an urban setting.

  16. "Click on This!": Technology Training for Teaching Professionals

    Science.gov (United States)

    Haas, Ken

    2004-01-01

    After a twenty-year hiatus from the academic classroom, the author decided that if he wanted to fit into the current academic mold he would have to make a major effort to improve his skills in teaching developmental reading and writing and to improve his knowledge of the new technologies that have literally insinuated themselves into the bricks…

  17. Handheld Technology Acceptance in Radiologic Science Education and Training Programs

    Science.gov (United States)

    Powers, Kevin Jay

    2012-01-01

    The purpose of this study was to explore the behavioral intention of directors of educational programs in the radiologic sciences to adopt handheld devices to aid in managing student clinical data. Handheld devices were described to participants as a technology representing a class of mobile electronic devices including, but not limited to,…

  18. Advancing Technology: GPS and GIS Outreach Training for Agricultural Producers

    Science.gov (United States)

    Flynn, Allison; Arnold, Shannon

    2010-01-01

    The use of the Global Positioning System (GPS) and Global Information Systems (GIS) has made significant impacts on agricultural production practices. However, constant changes in the technologies require continuing educational updates. The outreach program described here introduces the operation, use, and applications of GPS receivers and GIS…

  19. Videodisc/Microcomputer Technology in Wildland Fire Behavior Training

    Science.gov (United States)

    M. J. Jenkins; K.Y. Matsumoto-Grah

    1987-01-01

    Interactive video is a powerful medium, bringing together the emotional impact of video and film and the interactive capabilities of the computer. Interactive videodisc instruction can be used as a tutorial, for drill and practice and in simulations, as well as for information storage. Videodisc technology is being used in industrial, military and medical applications...

  20. Using Interactive Videodisc Technology To Enhance Assessor Training.

    Science.gov (United States)

    Jacobson, Larry; Hafner, Laurin P.

    The first of two sections of this paper describes a pilot program that used interactive video (IAV) technology to enhance the scripting skills of teacher certification assessors in the administration of a classroom observation technique. A comparative analysis was drawn between three groups of assessors: those who received IAV programed…

  1. Technology, Teachers, and Training: Combining Theory with Macedonia's Experience

    Science.gov (United States)

    Hosman, Laura; Cvetanoska, Maja

    2013-01-01

    Numerous developing countries are currently planning or executing projects that introduce technology into their educational systems. This article asserts that such projects will have limited long-term success or impact until they are reconceptualized to incorporate three transformative concepts: teachers play the key role in determining the…

  2. Innovation technology in the initial training of children by the example of sport games

    Directory of Open Access Journals (Sweden)

    Ruslana Sushko

    2015-04-01

    Full Text Available Purpose: to determine the characteristics of innovative technologies and the current state of organizational work with children at the initial stage of training in sports. Material and Methods: to understand the application of innovative technologies used coaches poll and summarized expert assessment specialists in the field of sports. Results: the current state of the question concerning the possibility of the initial training of children in early specialization in sports for example basketball, volleyball and tennis. Clarified the importance and necessity of innovative activities for children at the initial stage of training in sports. Conclusions: the identified innovative approaches for constructing the process of initial training in tennis, which are not observed in other kinds of sports.

  3. Whole greater than the parts: integrated esophageal centers (IEC) and advanced training in esophageal diseases.

    Science.gov (United States)

    Triadafilopoulos, G; Clarke, J; Hawn, M

    2017-10-01

    An integrated esophageal center (IEC) is a multidisciplinary team with expertise, skill, range, and facilities necessary to achieve optimal outcomes in patients with esophageal diseases efficiently and expeditiously. Within IEC, patients presenting with esophageal symptoms undergo a detailed clinical, functional and structural evaluation of their esophagus prior to implementation of tailored medical, endoscopic or surgical therapy. Serving as a core, the IEC clinical practice also supports research and innovation in esophageal diseases as well as public and physician education. Referrals to the unit may be primary, either from primary care or self-initiated, or secondary from other specialty practices, to reassess patients who have previously failed therapies and to manage complex or complicated cases. The fundamental goals of the IEC are to provide value for patients with esophageal diseases, streamlining complex diagnostic investigations and expediting therapies aiming at reducing costs while improving clinical outcomes, and to accelerate knowledge generation through robust interaction and cross-training across disciplines. The organization of the IEC goes beyond traditional academic and clinical silos and involves a director and administrative team coordinating faculty and fellows from both medical and surgical disciplines and supported by other clinical lines, such as radiology, pathology, etc., while it interfaces with physicians, the public, basic, translational and clinical research groups, and related industry partners. © The Authors 2017. Published by Oxford University Press on behalf of International Society for Diseases of the Esophagus. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. Long-billed curlews on the Yakima Training Center: Information for base realignment

    Energy Technology Data Exchange (ETDEWEB)

    Hand, K.D.; Cadwell, L.L.; Eberhardt, L.E.

    1994-02-01

    This report summarizes and discusses the results obtained during 1992 from the study of long-billed curlews on the Yakima Training Center (YTC), which Pacific Northwest Laboratory conducted for the US Department of the Army. This study was initiated to provide basic ecological information on YTC long-billed curlews (Numenius americanus). The long-billed curlew is a relatively common spring and summer resident on the YTC. However, other than casual observations, very little is known about the distribution, density, reproductive success, and habitat requirements for this species on the YTC. Until recently the long-billed curlew was a US Fish and Wildlife Service candidate for listing as threatened or endangered; however, on November 21, 1991 it was down-listed to Class IIIc. The Washington Department of Wildlife lists the long-billed curlew as a ``species of special concern.`` Specific objectives of this study were to (1) locate nesting areas, (2) locate brood-rearing areas, (3) evaluate habitat requirements, (4) determine diet, (5) evaluate response to troop activities, (6) evaluate the impact of livestock grazing, (7) estimate the population size, and (8) estimate recruitment rates. Six curlews (four females and two males) were captured and fitted with radio transmitters. These birds were relocated to obtain nesting, habitat use, and feeding information. Road surveys conducted over most of the YTC provided information on the bird`s general distribution, habitat requirements, and nesting and brood-rearing areas.

  5. Thermal Technology Development Activities at the Goddard Space Flight Center - 2001

    Science.gov (United States)

    Butler, Dan

    2002-01-01

    This presentation provides an overview of thermal technology development activities carried out at NASA's Goddard Space Flight Center during 2001. Specific topics covered include: two-phase systems (heat pipes, capillary pumped loops, vapor compression systems and phase change materials), variable emittance systems, advanced coatings, high conductivity materials and electrohydrodynamic (EHD) thermal coatings. The application of these activities to specific space missions is also discussed.

  6. Final Technical Report - Center for Technology for Advanced Scientific Component Software (TASCS)

    Energy Technology Data Exchange (ETDEWEB)

    Sussman, Alan [University of Maryland

    2014-10-21

    This is a final technical report for the University of Maryland work in the SciDAC Center for Technology for Advanced Scientific Component Software (TASCS). The Maryland work focused on software tools for coupling parallel software components built using the Common Component Architecture (CCA) APIs. Those tools are based on the Maryland InterComm software framework that has been used in multiple computational science applications to build large-scale simulations of complex physical systems that employ multiple separately developed codes.

  7. The interests and preferences of Delaware science and technology teachers in grades three through eight for the Innovation Technology Exploration Center (ITEC)

    Science.gov (United States)

    Peoples, Anne B.

    This exploratory research inquiry gave insight into the academic community's interests and needs in order to support the new Innovation Exploration Technology Center (ITEC) facility. The participants for this study included 257 conveniently available full-time science and technology teachers in grades three through eight (236 public, 7 parochial and 6 charter) who returned surveys from 2004 through may 2005. The researcher used her own non-published survey, which was piloted during the summer of 2004. The survey consisted of 4 duplicate count questions, 3 Likert questions and 2 open-ended questions. The survey also had a check box area for participants if they consented to a follow-up interview. This data showed teacher in-service for teaching training options ranked the highest among all three-grade levels at 70.2% middle school and 62.9% for grades K-5. Among the three grade groups, Delaware Aerospace Education Foundation (DASEF) ranked the highest among middle school teachers for having heard of the program. Among activities, field trips ranked highest for all three grade groups and Interactive exhibits ranked the highest for services and speakers ranked the highest for level of interest in resources. The motivating factor that inspired teachers the most to utilize the facility was student's exhibits. The data gathered by surveys was further supported by the follow-up interviews.

  8. A Randomized Evaluation of Motivational Interviewing Training for Mandated Implementation of Alcohol Screening and Brief Intervention in Trauma Centers.

    Science.gov (United States)

    Darnell, Doyanne; Dunn, Christopher; Atkins, David; Ingraham, Leah; Zatzick, Douglas

    2016-01-01

    The American College of Surgeons has mandated that level I and level II trauma centers implement universal alcohol screening and brief intervention (SBI) for injured patients. This study was a secondary analysis of a national, 20-hospital, cluster-randomized implementation trial focusing on practical issues of training and supervising alcohol SBI providers in motivational interviewing (MI). The purpose of this study was to examine whether real-world trauma center providers can be trained to provide higher quality counseling using MI as part of brief interventions for alcohol and whether MI skills can be maintained over time. Sites were randomly assigned to receive a 1day workshop training in MI for alcohol SBI or not, and all providers regardless of training completed up to seven standardized patient assessments of MI fidelity over 27months. Six domains on the Motivational Interviewing Treatment Integrity (MITI) coding system were assessed and compared to proficiency criteria. Providers in the intervention training group showed substantially improved MITI scores over the course of the 27-month time period. Domains that had particularly strong improvement were MI spirit and empathy; however, despite the overall improvement in the intervention group scores, expert-derived proficiency criteria were attained only for the global scores. Routine trauma center providers who receive MI training can deliver higher quality counseling in alcohol brief interventions, but may not, however, attain previously derived proficiency standards. Future implementation efforts in real-world acute care medical settings could further elucidate provider characteristics that predict training response and also strive to demonstrate that higher quality alcohol SBI implementation is associated with improved patient-level outcomes.

  9. Audio networking at the Center for Art and Media Technology Karlsruhe

    Science.gov (United States)

    Dutilleux, Pierre

    1993-01-01

    The Center for Art and Media Technology is dedicated to art and its relationship to new media. The Center supports music as well as graphic art. It also will house museums. The Center will be fully operational by the middle of 1996. The audio network will interconnect five recording studios and a large theater with three control rooms. With the additional facilities, the number of 40 interconnected rooms is reached. As to the quality and the versatility, the network can be compared, to some extent, to that of a broadcast-building. Traditional networking techniques involve many kilometers of high quality audio-cables and bulky automated patch-bays. Still, we wish even more freedom in the way the rooms are interconnected. Digital audio and computer network technology are promising. Although digital audio technology is spreading, the size of the totally digital systems is still limited. Fiber optic and large capacity optical disks offer attractive alternatives to traditional techniques (cabling, multitrack recorders, sound archives, routing). The digital audio standards are evolving from point to point communication to network communication. A 1 Gbit/s network could be the backbone of a solution.

  10. Knowledge representation and communication with concept maps in teacher training of science and technology

    Directory of Open Access Journals (Sweden)

    Pontes Pedrajas, Alfonso

    2012-01-01

    Full Text Available This paper shows the development of an educational innovation that we have made in the context of initial teacher training for secondary education of science and technology. In this educational experience computing resources and concept maps are used to develop teaching skills related to knowledge representation, oral communication, teamwork and practical use of ICT in the classroom. Initial results indicate that future teachers value positively the use of concept maps and computer resources as useful tools for teacher training.

  11. Teller Training Module: Off-Line Banking System. High-Technology Training Module.

    Science.gov (United States)

    Lund, Candyce J.

    This teller training module on offline banking systems is intended to be part of a postsecondary financial applications course. The module contains the following sections: module objective; specific objective; content--electronic audit machine key functions, practice packet--sample bank transactions and practicing procedures, and…

  12. Training in virtual reality: qualitative results from a comparison of technology types

    Energy Technology Data Exchange (ETDEWEB)

    Sebok, Angelia; Nystad, Espen

    2005-08-15

    The study described in HWR-734 consisted of three experiments. The first experiment compared procedural and configuration learning using four display technology types; the second experiment compared these same four technology types in a retention and transfer of training condition, and the third experiment compared assembly learning using three types of displays. The purpose of the study was to determine if the technology types differed in their ability to support learning. Thus, several different types of learning tasks were included (i.e., procedures, configuration and assembly). For all types of learning, short term training effectiveness was evaluated: subjects were tested immediately after the training session, in the same conditions in which they had been trained. In addition, procedural learning was also evaluated in a retention and transfer of training condition, where subjects were tested 24 hours after the initial training, in a real-world talk-through condition. In the Procedural / Configuration knowledge conditions, four technology types were evaluated. These include a desktop monoscopic display (DM), a desktop stereoscopic display (DS), a large-screen stereoscopic display (LS-S), and a head-mounted display with orientation tracking. In the Assembly knowledge condition, three technology types were evaluated: a desktop monoscopic display (DM), a large-screen monoscopic display (LS-M), and a head-mounted display without orientation tracking (HMD-nt). Twenty-four employees at the Halden Boiling Water Reactor (HBWR) participated in the study. The study lasted for one week, so all subjects attended for multiple days. Prior to starting the experiment, subjects attended a briefing where they were given instructions on how to use the equipment. They were allowed 10 minutes practice to get familiar with each technology type before each experimental session. During and after the experimental sessions, data were collected. These included objective data, such as

  13. Voice Technology Design Guides for Navy Training Systems.

    Science.gov (United States)

    1983-03-01

    81 mi4000111 b bleck ehm ~m) - This project was directed toward gathering information about applications of automated speech technology (AST) and...environmental events. automated performance measurement, and a strong voice interaction between the trainee and the system. Both successes and difficulties have...80-C-0057-1 Strong interaction with the user community is necessary throughout the curriculum development. A subject matter expert, ideally, should

  14. [How to integrate humanization and technology in nursing training].

    Science.gov (United States)

    Meyer, Dagmar Estermann

    2002-01-01

    This paper discusses the current incorporation of the subject of humanization of care in the current context of Brazilian nursing. The relation between nursing and technology is approached, in this study, from a historical perspective. The study also develops the proposition of "human re-signification", having as reference the concept of Cyborg, considering the way this concept has been employed in the contemporary cultural and feminist theoretical framework.

  15. Leadership training in science, technology, engineering and mathematics education in Bulgaria

    Science.gov (United States)

    Bairaktarova, Diana; Cox, Monica F.; Evangelou, Demetra

    2011-12-01

    This synthesis paper explores current leadership training in science, technology, engineering and mathematics (STEM) education in Bulgaria. The analysis begins with discussion of global factors influencing the implementation of leadership training in STEM education in general and then presents information about the current status of leadership training in Bulgaria with emphases on the country's economics, politics and geographical location as specific factors influencing leadership education. A short background of Bulgaria is presented with regard to population, gross domestic product, educational system, engineering force and possible need for leaders in industry in Bulgaria and the European Union. The paper provides an overall view about the current status of leadership training in all Bulgarian universities offering STEM education and concentrates specifically on two major universities by examining their currently offered programmes. As part of the discussion, similar training elements in other European countries and the USA are presented.

  16. Emerging technologies in education and training: applications for the laboratory animal science community.

    Science.gov (United States)

    Ketelhut, Diane Jass; Niemi, Steven M

    2007-01-01

    This article examines several new and exciting communication technologies. Many of the technologies were developed by the entertainment industry; however, other industries are adopting and modifying them for their own needs. These new technologies allow people to collaborate across distance and time and to learn in simulated work contexts. The article explores the potential utility of these technologies for advancing laboratory animal care and use through better education and training. Descriptions include emerging technologies such as augmented reality and multi-user virtual environments, which offer new approaches with different capabilities. Augmented reality interfaces, characterized by the use of handheld computers to infuse the virtual world into the real one, result in deeply immersive simulations. In these simulations, users can access virtual resources and communicate with real and virtual participants. Multi-user virtual environments enable multiple participants to simultaneously access computer-based three-dimensional virtual spaces, called "worlds," and to interact with digital tools. They allow for authentic experiences that promote collaboration, mentoring, and communication. Because individuals may learn or train differently, it is advantageous to combine the capabilities of these technologies and applications with more traditional methods to increase the number of students who are served by using current methods alone. The use of these technologies in animal care and use programs can create detailed training and education environments that allow students to learn the procedures more effectively, teachers to assess their progress more objectively, and researchers to gain insights into animal care.

  17. The Assimilation of Assistive Technology in Residential Care Centers for People with Intellectual Disabilities

    Directory of Open Access Journals (Sweden)

    Eli Carmeli

    2004-01-01

    Full Text Available People with intellectual disability (ID require special support in order to achieve independence in their daily life. Persons with ID are less exposed to assistive technology, although studies have shown that the availability of aids afford an opportunity to reach independence and cooperation. The aim of this study was to examine the nature of the relationship between involvement of the physiotherapy (PT team and the degree to which assistive technology was used. A questionnaire was sent to all PTs employed at all 54 residential care centers for persons with ID of the Division for Mental Retardation at the Ministry of Social Affairs in Israel. A significantly positive correlation was found between the degree of involvement of the PT and the utilization of assistive technology. The study results may be summarized by stating that PTs demonstrated a great deal of involvement, particularly in relation to the extent of their work in the residential care centers. PT's awareness of the importance was indicated as the major reason to use assistive technology.

  18. Training and technical assistance for compliance with beverage and physical activity components of New York City's regulations for early child care centers.

    Science.gov (United States)

    Kakietek, Jakub; Dunn, Lillian; O'Dell, Sarah Abood; Jernigan, Jan; Kettel Khan, Laura

    2014-10-16

    In 2006, the New York City Department of Health and Mental Hygiene (DOHMH) passed regulations for child care centers that established standards for beverages provided to children and set a minimum amount of time for daily physical activity. DOHMH offered several types of training and technical assistance to support compliance with the regulations. This article analyzes the association between training and technical assistance provided and compliance with the regulations in a sample of 174 group child care centers. Compliance was measured by using a site inventory of beverages stored on premises and a survey of centers' teachers regarding the amount of physical activity provided. Training and technical assistance measures were based on the DOHMH records of training and technical assistance provided to the centers in the sample and on a survey of center directors. Ordinal logistic regression was used to assess the association between training and technical assistance measures and compliance with the regulations. Measures of training related to physical activity the center received: the number of staff members who participated in Sport, Play and Active Recreation for Kids (SPARK) and other training programs in which a center participated were associated with better compliance with the physical activity regulations. Neither training nor technical assistance were associated with compliance with the regulations related to beverages. Increased compliance with regulations pertaining to physical activity was not related to compliance with beverage regulations. Future trainings should be targeted to the specific regulation requirements to increase compliance.

  19. Activities of the NASA/Marshall Space Flight Center pump stage technology team

    Science.gov (United States)

    Garcia, R.; Mcconnaughey, P.; Eastland, A.

    1992-01-01

    In order to advance rocket propulsion technology, the Consortium for Computational Fluid Dynamics (CFD) Application in Propulsion Technology has been formed at Marshall Space Flight Center (MSFC). The Consortium consists of three Teams: the turbine stage team, the pump stage team (PST), and the combustion devices team. The PST has formulated and is implementing a plan for pump technology development whose end product will be validated CFD codes suitable for application to pump components, test data suitable for validating CFD codes, and advanced pump components optimized using CFD codes. The PST's work during the fall of 1991 and the winter and spring of 1992 is discussed in this paper. This work is highlighted by CFD analyses of an advanced impeller design and collection of laser two-focus velocimeter data for the Space Shuttle Main Engine High Pressure Fuel Pump impeller.

  20. Modeling the adoption process of the Flight Training Synthetic Environment Technology (FTSET) in the Turkish Army Aviation (TUAA)

    OpenAIRE

    Boztas, Omer

    2006-01-01

    MBA Professional Report The motivation for using Flight Training Synthetic Environment Technology (FTSET) in military aviation is to create a cost-efficient and a risk-managed training environment. However, deciding on the appropriate mix of synthetic versus actual flight training remains a great unresolved issue. Further, FTSET usage and its adoption level may vary across the aviation community and flight training curricula. TUAA has employed FTSET in helicopter flight training since 1990...