WorldWideScience

Sample records for technology technical assistance

  1. Technical assistance and the transfer of remote sensing technology. [for economic development

    Science.gov (United States)

    Chipman, R.

    1977-01-01

    The transfer of technology from industrialized countries to the third world is a very complicated process and one that requires a great deal of research and development. The political and social obstacles to this transfer are generally greater than the technical obstacles, but technical assistance programs have neither the competence nor the inclination to deal with these factors adequately. Funding for technical assistance in remote sensing is now expanding rapidly, and there is a growing need for institutions to study and promote the effective use of this technology for economic development. The United Nations, the Food and Agriculture Organization, the World Bank, the United States Agency for International Development and the Canadian technical assistance agencies take different approaches to the problem and deal with the political pressures in different ways.

  2. Sources of technical assistance

    International Nuclear Information System (INIS)

    Laue, H.J.

    1977-01-01

    This paper shows examples of technical assistance programmes within bilateral cooperation agreements between the Federal Republic of Germany and a number of developing countries of very different characteristics and summarizes the possibilities of technical assistance granted by international organizations, such as IAEA, UNDP, etc. A basic requirement for a successful transfer of technology is a high knowledge level of the indigenous scientists and engineers. Therefore, programmes for training and education and for information exchange are presented. Based on these, the means and methods of planning, performance and quality assurance are explained by practical examples and are related to the progress achieved in the use of nuclear energy and in establishing a national industry in the developing countries. (orig.) [de

  3. Discovering Hidden Resources: Assistive Technology Recycling, Refurbishing, and Redistribution. RESNA Technical Assistance Project.

    Science.gov (United States)

    RESNA: Association for the Advancement of Rehabilitation Technology, Arlington, VA.

    This monograph discusses the benefits of recycling and reusing assistive technology for students with disabilities. It begins by discussing the benefits of recycled assistive technology for suppliers, students, and consumers, and then profiles programmatic models for assistive technology recycling programs. The advantages and disadvantages for…

  4. Endoscopic and keyhole endoscope-assisted neurosurgical approaches: a qualitative survey on technical challenges and technological solutions.

    Science.gov (United States)

    Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

    2014-10-01

    The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent theme analysis. Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches.

  5. Solar Technical Assistance Team 2013 Webinars | State, Local, and Tribal

    Science.gov (United States)

    Governments | NREL 3 Webinars Solar Technical Assistance Team 2013 Webinars The Solar Technical Assistance Team (STAT) 2013 webinar series provides an overview of solar technologies, resources, and the following sessions are available: Solar Finance for Residential and Commercial Customers and Potential Roles

  6. Development of nuclear technology through International Technical Cooperation programme: Malaysian experience

    International Nuclear Information System (INIS)

    Ainul Hayati Daud

    1997-01-01

    In the advent of new technologies and knowledge, countries need to rely on one another for progress and development. At the same time, new challenges to development, which are beyond the competence of any country to approach individually, have emerged. These have led to greater need for international co-operation, particularly among the developing countries. In Malaysia, international technical co-operation has contributed significantly towards the development of nuclear technology. Malaysia has received technical assistance through the multilateral, regional and bilateral co-operation. This assistance complements the efforts of the government to meet the primary objectives of science and technology programme, which are; intensification of R and D capacity and applications of technologies, both acquired and developed, in national development. Over the last one and a half decade, more than 70 projects valued almost USD 15 millions, were implemented under the Technical Assistance Programme of the International Atomic Energy Agency and the Bilateral Technical Assistance Programme of Japan and Australia. Malaysia also has benefited from the regional technical co-operation programme such Regional Co-operative Agreement for Asia and Pacific Region, United Nation Department Programme, International Nuclear Co-operation in Asia. While receiving assistance, Malaysia continues to assist other developing countries in their development efforts in the fields of nuclear technology, through the various international co-operation programmes. This report reviews the technical assistance received through the international co-operation and its contributions towards the development of nuclear technology in Malaysia for period 1980 - 1996

  7. Substitution of Assisted Living Services by Assistive Technology - Experts Opinions and Technical Feasibility.

    Science.gov (United States)

    Schwartze, Jonas; Prekazi, Arianit; Schrom, Harald; Marschollek, Michael

    2017-01-01

    Ambient assisted living (AAL) may support ageing in place but is primarily driven by technology. The aim of this work is, to identifying reasons to move into assisted living institutions, their range of service and possible substitutability. We did semi-structured interviews with five experts from assisted living institutions and used results to design and implement assistive technologies in an AAL environment using BASIS, a cross domain bus system for smart buildings. Reasons for moving to assisted living institutions are expected benefits for chronic health problems, safety, social isolation and carefree living. We implemented six application systems for inactivity monitoring, stove shutdown, air quality monitoring, medication and appointment reminders, detection of unwanted situations before leaving and optical ringing of the doorbell. Substitution of selected assisted living services is feasible and has potential to delay necessity to move into assisted living institution if complement social services are installed.

  8. 78 FR 29239 - Final Priority; Technical Assistance To Improve State Data Capacity-National Technical Assistance...

    Science.gov (United States)

    2013-05-20

    ... Assistance To Improve State Data Capacity--National Technical Assistance Center To Improve State Capacity To... Education and Rehabilitative Services announces a priority under the Technical Assistance to Improve State... (FY) 2013 and later years. We take this action to focus attention on an identified national need to...

  9. 25 CFR 41.10 - Technical assistance.

    Science.gov (United States)

    2010-04-01

    ... Community College's request in writing. In any case, where the type and source of technical assistance is... for technical assistance under this section shall be made in writing and sent to the applicant within... 25 Indians 1 2010-04-01 2010-04-01 false Technical assistance. 41.10 Section 41.10 Indians BUREAU...

  10. Technology Survey Assistance Tool Focusing on Their Advantages

    Science.gov (United States)

    Nishiyama, Risa; Takeuchi, Hironori; Watanabe, Hideo; Nasukawa, Tetsuya

    It is important for R&D managers, consultants, and other people seeking broad knowledge in technology fields to survey technical literature such as research papers, white papers, and technology news articles. One of the important kinds of information for those people regards the effectiveness of new technologies in their own businesses. General search engines are good at selecting documents revealing the details of a specific technology or a technology field, but it is hard to obtain useful information about how a technology will apply to individual business cases from such search results. There is a need for a technology survey assistance tool that helps users find technologies with suitable capabilities. In this paper, two technical tasks were tackled to develop the prototype of this assistance tool: Extraction of advantage phrases and scoring for the advantage phrases to find novel applications in the target technology field. We describe a new method to identify advantage phrases in technical documents and our scoring function that gives higher scores to novel applications of the technology. The results of evaluations showed our phrase identification method with only a few phrasal patterns performs almost as well as human annotators, and the proposed scoring conforms better to the decisions made by professionals than random sort.

  11. Technical Assistance Plan (TAP)

    Science.gov (United States)

    A Technical Assistance Plan (TAP) enables community groups to retain the services of an independent technical advisor and to provide resources for a community group to help inform other community members about site decisions.

  12. National Institute of Justice (NIJ) Center Requirements Definition, Technical Assistance, and Analysis

    National Research Council Canada - National Science Library

    Frantz, Frederick

    2003-01-01

    .... The current technology thrust areas for the Northeast Region are Concealed Weapons Detection, Secure Communications, Computer Forensics, Information Management, AGILE, and various technical assistance projects...

  13. Missouri local technical assistance program at Missouri University of Science and Technology (formerly University of Missouri--Rolla) : annual progress report January-December 2007.

    Science.gov (United States)

    2009-02-01

    This annual report is a summary of the activities during 2007 for the Missouri Local Technical Assistance Program (Missouri LTAP), which is located at Missouri University of Science and Technology. The report highlights Missouri LTAPs performance ...

  14. Foreign Assistance: Treasury's Technical Assistance Program

    National Research Council Canada - National Science Library

    Ford, Jess

    1999-01-01

    After the collapse of communism in Central Europe and the dissolution of the Soviet Union, the United States developed programs of technical assistance to help countries transition to market economies and democracy...

  15. Building, Maintaining, and Ending Relationships: An Urban School District and a Technical Assistance Team. Documentation and Technical Assistance in Urban Schools.

    Science.gov (United States)

    Holmes, Manford L.

    This paper describes the nature of the relationships developed between the technical assistance team of the Documentation and Technical Assistance (DTA) Project and members of a Chicago (Illinois) school district staff with whom the DTA worked. First, the methodology with which the technical assistance work was studied is described, as is the…

  16. 34 CFR 300.119 - Technical assistance and training activities.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Technical assistance and training activities. 300.119... Technical assistance and training activities. Each SEA must carry out activities to ensure that teachers and....114; and (b) Are provided with technical assistance and training necessary to assist them in this...

  17. Technical Assistance Needs Assessments (TANAs)

    Science.gov (United States)

    The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

  18. 7 CFR 1580.302 - Technical assistance and services.

    Science.gov (United States)

    2010-01-01

    ... producers written confirmation of all technical assistance meetings. Producers shall also have access to technical information provided in writing and electronically. (d) Producers shall also be provided... 7 Agriculture 10 2010-01-01 2010-01-01 false Technical assistance and services. 1580.302 Section...

  19. 10 CFR 440.23 - Oversight, training, and technical assistance.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Oversight, training, and technical assistance. 440.23... PERSONS § 440.23 Oversight, training, and technical assistance. (a) The Secretary and the appropriate..., directly or indirectly, training and technical assistance to any grantee or subgrantee. Such training and...

  20. Superfund Technical Assistance Grants

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes data related to the Superfund Technical Assistance Grant program, including grant number, award amounts, award dates, period of performance,...

  1. Technical assistance contractor management plan: Surface and ground water

    International Nuclear Information System (INIS)

    1994-09-01

    This report presents the general management structure of the Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. This team is a partnership of four major private subcontractors, which teamed together, are striving to be the leader in environmental restoration of uranium mining and milling operations. It will provide a pool of experts in various aspects of the technologies necessary to accomplish this goal, available to DOE to deal with mission concerns. The report expands on goals from TAC's mission statement, which include management concerns, environment, safety, and health, quality, technical support, communications, and personnel

  2. Technical assistance contractor management plan: Surface and ground water

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This report presents the general management structure of the Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. This team is a partnership of four major private subcontractors, which teamed together, are striving to be the leader in environmental restoration of uranium mining and milling operations. It will provide a pool of experts in various aspects of the technologies necessary to accomplish this goal, available to DOE to deal with mission concerns. The report expands on goals from TAC`s mission statement, which include management concerns, environment, safety, and health, quality, technical support, communications, and personnel.

  3. Pattern and impact of the Agency's technical assistance programme in the Asia and Pacific Region

    International Nuclear Information System (INIS)

    Nethsinghe, D.A.

    1979-01-01

    The main objectives of the Agency's technical assistance programmes are to promote the transfer of skills and knowledge relating to the peaceful uses of atomic energy to developing countries, to support the efforts of these countries to carry out their atomic energy activities safely and more efficiently, and to ensure that the technology transferred can continue to be applied usefully after the Agency's assistance has been completed. The assistance can be in the form of fellowship awards for training, for expert and consulting services, and for equipment. It may cover a wide range of scientific and technical fields. The impact of the Agency's technical assistance in several of these fields, i.e., reactors and power plants, prospecting for uranium and other raw materials, agriculture, industrial applications, and nuclear medicine, are reviewed

  4. 22 CFR 120.22 - Technical assistance agreement.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Technical assistance agreement. 120.22 Section... DEFINITIONS § 120.22 Technical assistance agreement. An agreement (e.g., contract) for the performance of a... license to manufacture defense articles. Assembly of defense articles is included under this section...

  5. 34 CFR 366.11 - What financial assistance does the Secretary provide for training and technical assistance?

    Science.gov (United States)

    2010-07-01

    ... for training and technical assistance? 366.11 Section 366.11 Education Regulations of the Offices of..., DEPARTMENT OF EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.11 What financial assistance does the Secretary provide for training and technical assistance? (a) From funds, if...

  6. 34 CFR 366.10 - What agencies are eligible for assistance to provide training and technical assistance?

    Science.gov (United States)

    2010-07-01

    ... training and technical assistance? 366.10 Section 366.10 Education Regulations of the Offices of the... EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.10 What agencies are eligible for assistance to provide training and technical assistance? Entities that have experience in the...

  7. The Effect of Technical Assistance on Involvement and Use: The Case of a Research, Evaluation, and Technical Assistance Project

    Science.gov (United States)

    Roseland, Denise; Volkov, Boris B.; Callow-Heusser, Catherine

    2011-01-01

    In contrast to typical National Science Foundation program evaluations, the Utah State Math Science Partnership-Research, Evaluation and Technical Assistance Project (MSP-RETA) provided technical assistance (TA) in two forms: direct TA for up to 10 projects a year, and professional development sessions for a larger number of project staff. Not…

  8. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  9. 76 FR 6810 - Announcement of Funding Awards for the Special Needs Assistance Programs-Technical Assistance...

    Science.gov (United States)

    2011-02-08

    ... Awards for the Special Needs Assistance Programs--Technical Assistance (SNAPS--TA) Fiscal Year 2010... funding awards for HUD'S Fiscal Year 2010 Special Needs Assistance Programs--Technical Assistance (SNAPS... Department in a competition for funding under the Notice of Funding Availability (NOFA) for the Special Needs...

  10. Technical assistance in Latin America

    International Nuclear Information System (INIS)

    Oteiza-Quirno, A.

    1976-01-01

    As in the other regions, nuclear technology development in Latin America reflects mainly the degree of technological development already existing in each country. It is quite significant that in nearly all countries in Latin America the medical profession has been the first to show interest in using nuclear techniques. As a result, a country such as Uruguay has become a source of recruitment for technical assistance experts in nuclear medicine to other developing countries, while at the same time it continues to receive assistance for new sophisticated techniques from the IAEA. Part of this assistance, in turn, comes from the neighbouring countries, Argentina and Brazil. For example, an expert from Uruguay is currently assigned under an Agency programme to Costa Rica, El Salvador and Guatemala, and experts from Argentina and Brazil have been sent to Uruguay. This is an example of 'horizontal' development, meaning mutual assistance between developing countries under programmes supported by the United Nations Agencies, which is now being emphasized by the United Nations Development Programme (UNDP). Still in the field of nuclear medicine, another significant model is provided by Bolivia. With assistance from the IAEA, and thanks to the availability of a good professional infrastructure in that country, a net of nuclear medicine services has been started, consisting of a well-developed nuclear medicine centre in La Paz and regional centres in Cochabamba, Sucre and Santa Cruz. Because of its great variations in altitude, Bolivia is in the position of being able to conduct research on the adaptation of man to diverse environmental conditions. The Agency has contributed, and continues to do so, to these programmes by sending experts, providing for training abroad of Bolivian doctors under its fellowship programmes, and providing basic equipment for all four centres. Independently of the cases described above, the IAEA has implemented or is implementing a considerable

  11. 19 CFR 213.4 - Disclosure of receipt of technical assistance.

    Science.gov (United States)

    2010-04-01

    ....4 Section 213.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE TRADE REMEDY ASSISTANCE § 213.4 Disclosure of receipt of technical assistance. An... received technical assistance from the Trade Remedy Assistance Office in any resulting petition, complaint...

  12. Technical assistance contractor Management Plan

    International Nuclear Information System (INIS)

    1993-09-01

    The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) and its major teaming partners [Roy F. Weston, Inc. (RFW), Sergent, Hauskins ampersand Beckwith Agra, Inc. (SHB Agra), and Geraghty ampersand Miller, Inc. (G ampersand M)]. The first three companies have worked together effectively on the UMTRA Project for more than 10 years. With the initiation of the UMTRA Groundwater Project in April 1991, a need arose to increase the TAC's groundwater technical breadth and depth, so G ampersand M was brought in to augment the team's capabilities. The TAC contract's scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both surface and groundwater projects. The TAC team continues to support the DOE in completing surface remedial actions and initiating groundwater remediation work for start-up, characterization, design, construction oversight, and remedial operations. A key feature of the TAC's management approach is the extensive set of communication systems implemented for the UMTRA Project. These systems assist all functional disciplines in performing UMTRA Project tasks associated with management, technical support, administrative support, and financial/project controls

  13. 75 FR 13521 - Centers for Independent Living Program-Training and Technical Assistance

    Science.gov (United States)

    2010-03-22

    ... DEPARTMENT OF EDUCATION Centers for Independent Living Program--Training and Technical Assistance... for Independent Living Program--Training and Technical Assistance (CIL-TA program). The Assistant... appropriated for the CIL program to provide training and technical assistance to CILs, agencies eligible to...

  14. RE/SPEC Inc. technical support to the Repository Technology Program

    International Nuclear Information System (INIS)

    Wagner, R.A.

    1992-06-01

    This report presents a summary of all RE/SPEC Inc. technical support activities to the Repository Technology Program (RTP) from September 1, 1988, through June 30, 1992. The RE/SPEC Inc. activities are grouped into the following categories: project management, project quality assurance (QA), performance assessment (PA), support of the Office of Civilian Radioactive Waste Management (OCRWM) through technical reviews and general assistance, participation in the Department of Energy (DOE) International Program, and code evaluation and documentation

  15. 40 CFR 35.4005 - What is a Technical Assistance Grant?

    Science.gov (United States)

    2010-07-01

    ... public participation in decision making at eligible sites. A TAG allows your group to procure independent... Technical Assistance Grant? A Technical Assistance Grant (TAG) provides money for your group to obtain... how a technical advisor can help your group include, but are not limited to: (a) Reviewing preliminary...

  16. 76 FR 7870 - Agency Information Collection Activities: Cybersecurity and Communications Technical Assistance...

    Science.gov (United States)

    2011-02-11

    ...: Technical Assistance Request and Evaluation. Form: DHS Form 9042, DHS Form 9043. OMB Number: 1670-NEW... technical assistance requests from each State and territory. The Technical Assistance Evaluation Form is... will be submitted electronically. Evaluation forms may be submitted electronically or in paper form...

  17. 32 CFR 203.12 - Technical assistance for public participation provider qualifications.

    Science.gov (United States)

    2010-07-01

    ... waste problems. (2) Experience in making technical presentations. (3) Demonstrated writing skills. (4... 32 National Defense 2 2010-07-01 2010-07-01 false Technical assistance for public participation... THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP...

  18. Technical assistance for Meharry Medical College Energy Efficiency Project. Final project status and technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-08

    This report presents the results of a program to provide technical assistance to Meharry Medical College. The purpose of the program is to facilitate Meharry`s effort to finance a campus-wide facility retrofit. The US Department of Energy (USDOE) funded the program through a grant to the Tennessee Department of Economic and Community Development (TECD). The University of Memphis-Technology and Energy Services (UM-TES), under contract to TECD, performed program services. The report has three sections: (1) introduction; (2) project definition, financing, and participants; and (3) opportunities for federal participation.

  19. Accelerator assisted repositories, technical issue identification and economic assessment

    Energy Technology Data Exchange (ETDEWEB)

    Myers, T.; Favale, A.; Berwald, D. [Northrop Grumman Corp., Bethpage, NY (United States)

    1995-12-31

    An investigation (technical and economic) is presented to quantify the impact of accelerator assisted repository (AAR) system on the US national nuclear repository strategy. An overview of US spent fuel policy is presented which provides a means to comparatively assess competing spent fuel disposition technologies under investigation. The advantages of an AAR system are highlighted and discussed. A companion economic analysis is presented. The results indicate that although a US geologic waste repository will continue to be required, waste partitioning and accelerator transmutation of selected actinides, and long-lived fission products, can result in substantial benefits. (author) 18 refs.

  20. International technical assistance example. Consortium action in Bulgaria

    International Nuclear Information System (INIS)

    Mattei, J.M.; Milhem, J.L.

    1993-03-01

    The safety status achieved last year at the Kozloduy Nuclear Power Plant (NPP) and the capability of the Bulgarian Nuclear Safety Authority (BNSA) to assess the safety of the plant and the adequacy of proposed improvements have been matters of international concern. However, the Kozloduy NPP contributes 35-40 per cent of the electrical generating capacity in Bulgaria. For further operation of the plants, it is therefore, essential that safety is improved. In july 1991, the Commission of the European Communities (CEC) instituted a Six Months Emergency Action Programme for Bulgaria under the PHARE regional nuclear safety programme. The programme consisted of three parts: - an industrial emergency programme supporting the utility of the Kozloduy NPP, - a study to evaluate Bulgaria's electricity needs, - technical assistance for reinforcement of the Bulgarian Nuclear Safety Authority. For the third part, complementary to the industrial emergency programme carried out by the WANO (World Association of Nuclear Operators), a Consortium of expert institutions and regulatory from EC member states was established by CEC for assistance to BNSA. The Consortium consisted of: - Institut de Protection et de Surete Nucleaire (IPSN), France, technical support of the French regulatory body, - Gesellschaft fur Anlagen und Reaktorsicherheit (GRS) mbH, Germany, an organization in safety engineering, technical support of governmental regulatory body, - AIB-Vincotte Nuclear (AVN), Belgium, the organization authorized by the Belgian Government for licensing and inspection of nuclear power plants, - UK Atomic Energy Authority (AEA Technology), an independent UK Government owned nuclear R and D and consultancy organization, - Nuclear Installations Inspectorate (NII) of the Health and Safety Executive, United Kingdom, the nuclear regulatory body for the United Kingdom

  1. 50-year of the Technical Assistance Service to Industry (SATI): notes from a heterodoxy

    International Nuclear Information System (INIS)

    Enriquez, Santiago N.

    2011-01-01

    This report is in honor of the 50° creation anniversary of the Service of Technical Assistance to Industry (SATI),a service with no background in Argentina. This occasion is appropriate to think the historical conditions which made possible the existence of the SATI in the National Atomic Energy Commission. Secondly, this report describes its operative characteristics and its achievements in different fields: from the technical and industry-learning aspects, up to the development of the conception about the relation between Science, Technology and Society. (author) [es

  2. 77 FR 47501 - Applications for New Awards; Technical Assistance on State Data Collection, Analysis, and...

    Science.gov (United States)

    2012-08-08

    ... Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical... for New Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA... Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on...

  3. TADS: Technical Assistance Development System.

    Science.gov (United States)

    Epting, Rosemary, Ed.

    Described is the Technical Assistance Development System (TADS), a component of the Frank Porter Graham Child Development Center of the University of North Carolina at Chapel Hill which offers support services to preschool demonstration centers for handicapped children in the First Chance Network. Discussed are the four types of services offered:…

  4. Fiscal 1994 report for April. PHARE and TACIS: Technical assistance by EC; PHARE to TACIS: EC no gijutsu enjo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-01

    Although the PHARE (Poland and Hungary Assistance for Restructuring of Economy) program which was started in December 1989 was initially intended to work for Poland and Hungary, yet the number of countries to enjoy the assistance has increased due to political changes in progress in CEE (Central and Eastern Europe) countries, and now 11 countries are under cover of the program. PHARE assistance funds are not loans, but are granted to the receiving countries as subsidies for their economic renovation activities. The funds are not invested directly in business activities, but are utilized to help governments implement their renovation programs. That is, they are spent for investigations for various renovation programs, policy and program formulation, transfer of professional knowledge and technology, and for technical assistance for education and training. The TACIS (Technical Assistance CIS) program which was started in July 1991 is again for technical assistance like PHARE, and aims to help NIS (New Independent State) countries implement their projects for transition to the market economy. Assistance activities include counselling about policy formulation, system and legal framework building, and training of experts and the supply of equipment required for carrying out the said assistance activities. (NEDO)

  5. The international cooperation year - Technical assistance through IAEA

    International Nuclear Information System (INIS)

    1965-01-01

    In 1964, sixty-two countries benefited from the Agency's technical assistance programme, which involved an actual expenditure of more than 3 million dollars (including some payments against obligations incurred in previous years). This represents an increase of 29 percent over the amount of $2,423,000. spent in 1963. In addition to funds provided from the Agency's own resources and from the United Nations Expanded Programme of Technical Assistance, many gifts in kind - equipment, fellowships, and expert services - were supplied through the Agency, to a value of $708,000

  6. 5 CFR 340.203 - Technical assistance.

    Science.gov (United States)

    2010-01-01

    ... part-time employment practices; (3) Development of special recruitment and selection techniques for...-TIME CAREER EMPLOYMENT (PART-TIME, SEASONAL, ON-CALL, AND INTERMITTENT) Regulatory Requirements-Part-Time Employment § 340.203 Technical assistance. (a) The Office of Personnel Management shall provide...

  7. Technical assistance contractor Management Plan. Final [report

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) and its major teaming partners [Roy F. Weston, Inc. (RFW), Sergent, Hauskins & Beckwith Agra, Inc. (SHB Agra), and Geraghty & Miller, Inc. (G&M)]. The first three companies have worked together effectively on the UMTRA Project for more than 10 years. With the initiation of the UMTRA Groundwater Project in April 1991, a need arose to increase the TAC`s groundwater technical breadth and depth, so G&M was brought in to augment the team`s capabilities. The TAC contract`s scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both surface and groundwater projects. The TAC team continues to support the DOE in completing surface remedial actions and initiating groundwater remediation work for start-up, characterization, design, construction oversight, and remedial operations. A key feature of the TAC`s management approach is the extensive set of communication systems implemented for the UMTRA Project. These systems assist all functional disciplines in performing UMTRA Project tasks associated with management, technical support, administrative support, and financial/project controls.

  8. 78 FR 16447 - Rehabilitation Continuing Education Program (RCEP) for the Technical Assistance and Continuing...

    Science.gov (United States)

    2013-03-15

    ... (RCEP) for the Technical Assistance and Continuing Education Centers (TACE Centers); Proposed Extension... (RCEP) for the Technical Assistance and Continuing Education Centers (TACE Centers), the Secretary... with disabilities through enhanced technical assistance (TA) and continuing education (CE) for State...

  9. Recruiting experts for technical assistance rogramme

    International Nuclear Information System (INIS)

    1974-01-01

    One of the objectives of the IAEA is the provision of technical assistance to its Member States to carry out their peaceful nuclear activities more efficiently and safely. This involves looking for and supplying experts, equipment and fellowships. Since 1958 the Agency has provided the services of more than 1800 experts valued at $11.5 million, 4300 fellowships valued at $14.3 million, and equipment worth $10.8 million. The efficiency of the programme can only be increased by a more prompt consideration of proposals forwarded by the Agency, and the continuing co-operation from national Governments and private institutions. The IAEA recruits an average of 200 experts a year to implement its Regular Technical Assistance Programme. These projects are financed by voluntary contributions from Member States, and by the United Nations Development Programme for those projects for which the IAEA is the executing agency

  10. 77 FR 47495 - Final Priority; Technical Assistance on State Data Collection, Analysis, and Reporting-National...

    Science.gov (United States)

    2012-08-08

    ... Priority; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical... 34 CFR Chapter III [CFDA Number 84.373Z] Final Priority; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on Early Childhood...

  11. Functional Vision Observation. Technical Assistance Paper.

    Science.gov (United States)

    Florida State Dept. of Education, Tallahassee. Bureau of Education for Exceptional Students.

    Technical assistance is provided concerning documentation of functional vision loss for Florida students with visual impairments. The functional vision observation should obtain enough information for determination of special service eligibility. The observation is designed to supplement information on the medical eye examination, and is conducted…

  12. 34 CFR 300.105 - Assistive technology.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Assistive technology. 300.105 Section 300.105 Education... DISABILITIES State Eligibility Other Fape Requirements § 300.105 Assistive technology. (a) Each public agency must ensure that assistive technology devices or assistive technology services, or both, as those terms...

  13. Report of the Office of Nuclear Reactor Regulation technical assistance task force

    International Nuclear Information System (INIS)

    1981-11-01

    In 1981, the Director of the Office of Nuclear Reactor Regulation (NRR) of the Nuclear Regulatory Commission (NRC) chartered a task force to assess the office program of technical assistance and to recommend improvements. The task force divided the technical assistance program into four areas, and the practices in each area were assessed through a series of surveys of staff, management, and contractor personnel. The task force placed emphasis in its interview and assessment process on the problem areas that exist in the technical assistance program. The report thus reflects a weight on the faults found as a result of the inquiries made. The four major areas of technical assistance contracting studied were program planning, program management and execution, program control and management information systems, and program administration and coordination

  14. The evaluator as technical assistant: A model for systemic reform support

    Science.gov (United States)

    Century, Jeanne Rose

    This study explored evaluation of systemic reform. Specifically, it focused on the evaluation of a systemic effort to improve K-8 science, mathematics and technology education. The evaluation was of particular interest because it used both technical assistance and evaluation strategies. Through studying the combination of these roles, this investigation set out to increase understanding of potentially new evaluator roles, distinguish important characteristics of the evaluator/project participant relationship, and identify how these roles and characteristics contribute to effective evaluation of systemic science education reform. This qualitative study used interview, document analysis, and participant observation as methods of data collection. Interviews were conducted with project leaders, project participants, and evaluators and focused on the evaluation strategies and process, the use of the evaluation, and technical assistance. Documents analyzed included transcripts of evaluation team meetings and reports, memoranda and other print materials generated by the project leaders and the evaluators. Data analysis consisted of analytic and interpretive procedures consistent with the qualitative data collected and entailed a combined process of coding transcripts of interviews and meetings, field notes, and other documents; analyzing and organizing findings; writing of reflective and analytic memos; and designing and diagramming conceptual relationships. The data analysis resulted in the development of the Multi-Function Model for Systemic Reform Support. This model organizes systemic reform support into three functions: evaluation, technical assistance, and a third, named here as "systemic perspective." These functions work together to support the project's educational goals as well as a larger goal--building capacity in project participants. This model can now serve as an informed starting point or "blueprint" for strategically supporting systemic reform.

  15. Program of technical assistance to the Organization for the Prohibition of Chemical Weapons - lessons learned from the U.S. program of technical assistance to IAEA safeguards. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The Defense Nuclear Agency is sponsoring a technical study of the requirements of a vehicle to meet the OPCW`s future needs for enhanced chemical weapons verification capabilities. This report provides information about the proven mechanisms by which the U.S. provided both short- and long-term assistance to the IAEA to enhance its verification capabilities. Much of the technical assistance has generic application to international organizations verifying compliance with disarmament treaties or conventions. In addition, some of the equipment developed by the U.S. under the existing arrangements can be applied in the verification of other disarmament treaties or conventions. U.S. technical assistance to IAEA safeguards outside of the IAEA`s regular budget proved to be necessary. The U.S. technical assistance was successful in improving the effectiveness of IAEA safeguards for its most urgent responsibilities and in providing the technical elements for increased IAEA {open_quotes}readiness{close_quotes} for the postponed responsibilities deemed important for U.S. policy objectives. Much of the technical assistance was directed to generic subjects and helped to achieve a system of international verification. It is expected that the capabilities of the Organization for the Prohibition of Chemical Weapons (OPCW) to verify a state`s compliance with the {open_quotes}Chemical Weapons Convention{close_quotes} will require improvements. This report presents 18 important lessons learned from the experience of the IAEA and the U.S. Program of Technical Assistance to IAEA Safeguards (POTAS), organized into three tiers. Each lesson is presented in the report in the context of the difficulty, need and history in which the lesson was learned. Only the most important points are recapitulated in this executive summary.

  16. Final priority; technical assistance to improve state data capacity--National Technical Assistance Center to improve state capacity to accurately collect and report IDEA data. Final priority.

    Science.gov (United States)

    2013-05-20

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Technical Assistance to Improve State Data Capacity program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2013 and later years. We take this action to focus attention on an identified national need to provide technical assistance (TA) to States to improve their capacity to meet the data collection and reporting requirements of the Individuals with Disabilities Education Act (IDEA). We intend this priority to establish a TA center to improve State capacity to accurately collect and report IDEA data (Data Center).

  17. Security and emergency management technical assistance for the top 50 transit agencies

    Science.gov (United States)

    2007-04-01

    Between May 2002 and July 2006, the Federal Transit Administration (FTA) provided technical assistance to the top 50 transit agencies through the Security and Emergency Management Technical Assistance Program (SEMTAP). The scope and purpose of the pr...

  18. Electronic health records and technical assistance to improve quality of primary care: Lessons for regional extension centers.

    Science.gov (United States)

    Boas, Samuel J; Bishop, Tara F; Ryan, Andrew M; Shih, Sarah C; Casalino, Lawrence P

    2014-07-01

    In 2009, the American Recovery and Reinvestment Act apportioned $643 million for a Health Information Technology Extension Program, which established Regional Extension Centers (RECs) to support the implementation and use of electronic health records (EHRs). Little is known, however, about how RECs should assist in EHR implementation and how they should structure ongoing support. The purpose of this paper is to describe physicians' experiences with the Primary Care Information Project (PCIP), an REC run by the New York City Department of Health and Mental Hygiene. We interviewed 17 physicians enrolled in PCIP to understand the role of the EHRon quality of care and their experience with technical assistance from PCIP. All physicians stated that they felt that the EHR improved the quality of care they delivered to their patients particularly because it helped them track patients. All the physicians found technical assistance helpful but most wanted ongoing assistance months or years after they adopted the EHR. © 2013 Published by Elsevier Inc.

  19. The provision of technical assistance by the Agency with special reference to 1971. Report by the Director General

    International Nuclear Information System (INIS)

    1972-07-01

    number of qualified staff. 4. In 1971, 73 countries received technical assistance in one form or another from the Agency, as shown, Approximately two thirds of all assistance provided related to the application of isotopes and radiation in agriculture, nuclear engineering and technology, nuclear physics and the subjects covered by the classification heading 'Prospecting, mining and processing of nuclear materials'. 5. The assistance, including assistance in kind, was provided through the services of 345 experts, lecturers and visiting professors, the supply of equipment to a value of about $1 489 000, and 739 fellowship awards for individual study, scientific visits, two study tours and other short-term training projects. 6. The resources allocated for carrying out the Agency's 1971 technical assistance programme amounted to $5 630 000, whereas the total value of the technical assistance actually provided in 1971 was about $4 895 000. This includes payments against 1971 and prior years' obligations, as well as assistance in kind, and represents an increase of $900 000 or 23% over the sum of $3 486 000 provided in 1970, but does not include the unliquidated obligations and assistance in kind outstanding at the end of the year. As in earlier reports on the provision of technical assistance by the Agency, details are given below regarding activities in which developing countries have shown special interest in 1971, followed by information concerning other developments relating to technical assistance

  20. The provision of technical assistance by the Agency with special reference to 1971. Report by the Director General

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1972-07-15

    number of qualified staff. 4. In 1971, 73 countries received technical assistance in one form or another from the Agency, as shown, Approximately two thirds of all assistance provided related to the application of isotopes and radiation in agriculture, nuclear engineering and technology, nuclear physics and the subjects covered by the classification heading 'Prospecting, mining and processing of nuclear materials'. 5. The assistance, including assistance in kind, was provided through the services of 345 experts, lecturers and visiting professors, the supply of equipment to a value of about $1 489 000, and 739 fellowship awards for individual study, scientific visits, two study tours and other short-term training projects. 6. The resources allocated for carrying out the Agency's 1971 technical assistance programme amounted to $5 630 000, whereas the total value of the technical assistance actually provided in 1971 was about $4 895 000. This includes payments against 1971 and prior years' obligations, as well as assistance in kind, and represents an increase of $900 000 or 23% over the sum of $3 486 000 provided in 1970, but does not include the unliquidated obligations and assistance in kind outstanding at the end of the year. As in earlier reports on the provision of technical assistance by the Agency, details are given below regarding activities in which developing countries have shown special interest in 1971, followed by information concerning other developments relating to technical assistance.

  1. Guide to Federal Funding, Financing, and Technical Assistance for Plug-in Electric Vehicles and Charging Stations

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-07-29

    The U.S. Department of Energy and the U.S. Department of Transportation have published a guide to highlight examples of federal support and technical assistance for plug-in electric vehicles (PEVs) and charging stations. The guide provides a description of each opportunity and a point of contact to assist those interested in advancing PEV technology. The Department of Energy’s Alternative Fuels Data Center provides a comprehensive database of federal and state programs that support plug-in electric vehicles and infrastructure.

  2. 77 FR 46658 - Proposed Priority; Technical Assistance To Improve State Data Capacity-National Technical...

    Science.gov (United States)

    2012-08-06

    ... Assistance To Improve State Data Capacity--National Technical Assistance Center To Improve State Capacity To... and later years. We take this action to focus attention on an identified national need to provide TA to improve the capacity of States to meet the data collection requirements of the Individuals with...

  3. Technical assistance efforts at EG and G Idaho, Inc

    Energy Technology Data Exchange (ETDEWEB)

    Engen, I.A.; Toth, W.J.

    1981-01-01

    As part of DOE's geothermal outreach program, EG and G Idaho has been funded since 1977 to provide technical information and assistance to parties interested in the direct applications of geothermal energy. In this time information has been provided to over 1000 requestors and technical assistance and analyses have been supplied to over 250 parties interested in developing geothermal resources. Many of the latter efforts are leading to direct-use projects that use geothermal resources to replace fossil fuels. A few of the more promising projects are discussed.

  4. 25 CFR 1200.44 - What action will the Department take on requests for technical assistance?

    Science.gov (United States)

    2010-04-01

    ... technical assistance? 1200.44 Section 1200.44 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF THE INTERIOR AMERICAN INDIAN TRUST FUND MANAGEMENT REFORM ACT Technical Assistance § 1200.44 What action will the Department take on requests for technical assistance? We will respond in writing...

  5. 10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Grant application submittals for technical assistance and... Grant application submittals for technical assistance and energy conservation measures. (a) Each... assistance for energy conservation measures, including renewable resource measures, shall include the...

  6. 76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular

    Science.gov (United States)

    2011-04-04

    ... to FTA Circular 6100.1D, Research and Technical Assistance Training Program: Application Instructions... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of Final Circular AGENCY: Federal Transit Administration (FTA), DOT. ACTION...

  7. Technical assistance to Ohio closure sites; Recommendations toaddress contaminated soils, concrete, and corrective action managementunit/groundwater contamination at Ashtabula, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Charoglu, Emily; Eddy-Dilek, Carol; Gombert, Dirk; Hazen, Terry; Johnson, Bob; Looney, Brian; Krstich, Michael A.; Rautman, Chris; Tripp,Julia; Whitmill, Larry

    2002-08-26

    The Ashtabula Environmental Management Project (AEMP) at Department of Energy-Ohio (DOE-OH) requested technical assistance from the EM-50 Lead Lab to aid in defining new cost and time effective approaches in the following problem areas: soils, concrete, and groundwater/Corrective Action Management Unit (CAMU) at RMIES in Ashtabula, Ohio. Attachment 1 provides the site request for assistance. The technical assistance team assembled for this request is provided in Attachment 2. These individuals reviewed key site information prior to convening with DOE and contractor personnel (RMIES and Earthline) for a three-and-a-half-day meeting to better understand baseline technologies, limitations, and site-specific issues. After listening to presentations about the nature and extent of known contamination, the team broke out into several groups to brainstorm ideas and develop viable solutions. This executive summary details unresolved issues requiring management attention as well as recommendations to address soils, concrete, and groundwater/CAMU. It also provides a summary of additional technical assistance that could be provided to the site. More details are presented in the body of this report.

  8. Advanced Public Transportation Systems. Technical Assistance Brief 2

    Science.gov (United States)

    1993-01-01

    The Advanced Public Transportation Systems (APTS) Program requires evaluation : of pilot projects. This technical assistance brief discusses the guidelines set : for developing evaluation framework and methodology for local projects. 4p.

  9. 42 CFR 493.1838 - Training and technical assistance for unsuccessful participation in proficiency testing.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Training and technical assistance for unsuccessful... REQUIREMENTS Enforcement Procedures § 493.1838 Training and technical assistance for unsuccessful participation... may require the laboratory to undertake training of its personnel, or to obtain necessary technical...

  10. Technical Assistance Contractor management plan. Revision 1

    International Nuclear Information System (INIS)

    1995-08-01

    The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) as the prime contractor and three teaming partner subcontractors: Roy F. Weston, Inc. (RFW), AGRA Earth and Environmental, Inc. (AGRA), and Geraghty and Miller, Inc. (G and M). The TAC contract's scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both Surface and Ground Water Projects. The TAC team supports the DOE in completing surface remedial action and initiating ground water remediation work for start-up, characterization, compliance planning, design, construction oversight, and remedial operations. The TAC provides the DOE UMTRA Project Team with a dedicated management, scientific, and technical resource base in Albuquerque, New Mexico, which is supplemented by corporate resources. A carefully developed and maintained staff of technical experts is available to assess, analyze, develop, and execute cost-effective solutions to the demanding technical and institutional problems presented by the UMTRA Project

  11. The 1962 programme of technical assistance

    International Nuclear Information System (INIS)

    1962-01-01

    Experts and equipment are provided by the Agency in response to requests from Member States after the requests have been examined by technical, financial and other relevant criteria. Under the 1962 programme to be financed with the Agency's own resources, assistance in the form of services of experts and equipment will be given to the following countries: Argentina, Brazil, Burma, Ceylon, Chile, Denmark, El Salvador, Ghana, Haiti, Indonesia, Iran, Iraq, Israel, Japan, Korea, Mexico, Pakistan, Paraguay, the Philippines, Portugal, Thailand, Tunisia, Turkey, the United Arab Republic, and Yugoslavia. Some details of the individual projects of assistance to be financed with the Agency's own resources are given

  12. Preparing for Assisted Reproductive Technology

    Science.gov (United States)

    ... CDC Cancel Submit Search The CDC Assisted Reproductive Technology (ART) Note: Javascript is disabled or is not ... visit this page: About CDC.gov . Assisted Reproductive Technology (ART) What Is ART Patient Resources Preparing for ...

  13. Performance Evaluation Methods for Assistive Robotic Technology

    Science.gov (United States)

    Tsui, Katherine M.; Feil-Seifer, David J.; Matarić, Maja J.; Yanco, Holly A.

    Robots have been developed for several assistive technology domains, including intervention for Autism Spectrum Disorders, eldercare, and post-stroke rehabilitation. Assistive robots have also been used to promote independent living through the use of devices such as intelligent wheelchairs, assistive robotic arms, and external limb prostheses. Work in the broad field of assistive robotic technology can be divided into two major research phases: technology development, in which new devices, software, and interfaces are created; and clinical, in which assistive technology is applied to a given end-user population. Moving from technology development towards clinical applications is a significant challenge. Developing performance metrics for assistive robots poses a related set of challenges. In this paper, we survey several areas of assistive robotic technology in order to derive and demonstrate domain-specific means for evaluating the performance of such systems. We also present two case studies of applied performance measures and a discussion regarding the ubiquity of functional performance measures across the sampled domains. Finally, we present guidelines for incorporating human performance metrics into end-user evaluations of assistive robotic technologies.

  14. Solar Technical Assistance Team Profile: Megan Day | State, Local, and

    Science.gov (United States)

    Tribal Governments | NREL Technical Assistance Team Profile: Megan Day Solar Technical governments to grow their installed solar capacity. We're finding out which communities have the most installed solar--both in terms of total capacity and per capita--and trying to figure out what the

  15. 77 FR 20369 - Applications for New Awards; Centers for Independent Living-Training and Technical Assistance

    Science.gov (United States)

    2012-04-04

    ... Education ACTION: Notice. Overview Information Centers for Independent Living--Training and Technical.... Funding Opportunity Description Purpose of Program The purpose of the Training and Technical Assistance grant under the Centers for Independent Living program is to provide training and technical assistance...

  16. Technical Assistance Contractor management plan. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) as the prime contractor and three teaming partner subcontractors: Roy F. Weston, Inc. (RFW), AGRA Earth and Environmental, Inc. (AGRA), and Geraghty and Miller, Inc. (G and M). The TAC contract`s scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both Surface and Ground Water Projects. The TAC team supports the DOE in completing surface remedial action and initiating ground water remediation work for start-up, characterization, compliance planning, design, construction oversight, and remedial operations. The TAC provides the DOE UMTRA Project Team with a dedicated management, scientific, and technical resource base in Albuquerque, New Mexico, which is supplemented by corporate resources. A carefully developed and maintained staff of technical experts is available to assess, analyze, develop, and execute cost-effective solutions to the demanding technical and institutional problems presented by the UMTRA Project.

  17. Works Technical Department progress report, March 1961

    Energy Technology Data Exchange (ETDEWEB)

    None

    1961-04-19

    This document details the activities of the Savannah River Works Technical Department during the month of March 1961. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

  18. Technical assistance and Article IV of the NPT

    International Nuclear Information System (INIS)

    Bittencourt, H.F.S.

    1975-01-01

    The main concepts expressed in article IV of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) can also be found in the Statute of the International Atomic Energy Agency. My predecessor, Mr. Upendra Goswami, wrote the following some years ago: ''Even today, after a lapse of 14 years, the IAEA often presents to the outside world the aspect of an organization in which the control activities loom large and the promotional activities appear as a bit of thin icing on a 'safeguards' cake. But a closer look at the organization today would convince the intelligent observer that whatever might have been the object of the founding fathers, the organization promotes peaceful uses no less vigorously than it controls proliferation of nuclear arms.'' Since the IAEA's technical assistance programme started in 1958 and the NPT only came into existence ten years later, it is quite clear that the IAEA already had considerable experience in promoting the peaceful uses of atomic energy. However, in my view, we should always keep in mind that the technical assistance programme derives primarily from the Statute of the IAEA through a liberal interpretation of the intentions of our founding fathers, and in fact emerges as the sum total of requests from developing Member States. Since its inception in 1958, the IAEA's technical assistance programme has undergone some changes in its orientation and it is to this matter that I would like to call attention. (author)

  19. TADS and Technical Assistance: Readings on System Design, Needs Assessment, Consultation, and Evaluation.

    Science.gov (United States)

    Trohanis, Pascal L., Ed.

    The document reviews the technical assistance process used by TADS (Technical Assistance Development System), a project to provide support to HCEEP (Handicapped Children's Early Education Program) demonstration projects serving young handicapped children and their families. Chapter 1, by P. Trohanis, focuses on a number of questions that people…

  20. Technical and Technological Skills Assessment in Laparoscopic Surgery

    Science.gov (United States)

    Chang, Avril; Vincent, Charles

    2006-01-01

    Objectives: Surgical appraisal and revalidation are key components of good surgical practice and training. Assessing technical skills in a structured manner is still not widely used. Laparoscopic surgery also requires the surgeon to be competent in technological aspects of the operation. Methods: Checklists for generic, specific technical, and technological skills for laparoscopic cholecystectomies were constructed. Two surgeons with >12 years postgraduate surgical experience assessed each operation blindly and independently on DVD. The technological skills were assessed in the operating room. Results: One hundred operations were analyzed. Eight trainees and 10 consultant surgeons were recruited. No adverse events occurred due to technical or technological skills. Mean interrater reliability was kappa=0.88, P=technical and technological skills between trainee and consultant surgeons were significant, Mann-Whitney P=technical and technological skills can be measured to assess performance of laparoscopic surgeons. This technical and technological assessment tool for laparoscopic surgery seems to have face, content, concurrent, and construct validities and could be modified and applied to any laparoscopic operation. The tool has the possibility of being used in surgical training and appraisal. We aim to modify and apply this tool to advanced laparoscopic operations. PMID:17212881

  1. An Assistive Technology Design Framework for ADHD

    DEFF Research Database (Denmark)

    Sonne, Tobias; Marshall, Paul; Obel, Carsten

    2016-01-01

    In this paper, we present a design framework for ADHD assistive technologies that aims to give researchers grounding in the background research on the condition, to provide a lingua franca, and to highlight potential research directions for HCI researchers within assistive technology. The design ...... map existing assistive technologies and potential new research efforts to the framework concepts. This way we show how it is used to support and advance the research and development of novel assistive technologies for the ADHD domain....

  2. Integrating medical, assistive, and universally designed products and technologies: assistive technology device classification (ATDC).

    Science.gov (United States)

    Bauer, Stephen; Elsaesser, Linda-Jeanne

    2012-09-01

    ISO26000:2010 International Guidance Standard on Organizational Social Responsibility requires that effective organizational performance recognize social responsibility, including the rights of persons with disabilities (PWD), engage stakeholders and contribute to sustainable development. Millennium Development Goals 2010 notes that the most vulnerable people require special attention, while the World Report on Disability 2011 identifies improved data collection and removal of barriers to rehabilitation as the means to empower PWD. The Assistive Technology Device Classification (ATDC), Assistive Technology Service Method (ATSM) and Matching Person and Technology models provide an evidence-based, standardized, internationally comparable framework to improve data collection and rehabilitation interventions. The ATDC and ATSM encompass and support universal design (UD) principles, and use the language and concepts of the International Classification of Functioning, Disability and Health (ICF). Use ATDC and ICF concepts to differentiate medical, assistive and UD products and technology; relate technology "types" to markets and costs; and support provision of UD products and technologies as sustainable and socially responsible behavior. Supply-side and demand-side incentives are suggested to foster private sector development and commercialization of UD products and technologies. Health and health-related professionals should be knowledgeable of UD principles and interventions.

  3. Enresa's Participation in the Technical Assistance Programmes to the Eastern European Countries

    International Nuclear Information System (INIS)

    Beceiro, A. R.; Vico, E.

    2000-01-01

    This article briefly describes the participation of ENRESA in the technical assistance programmes to the Central and Eastern European countries (PHARE) and to the New Independent States (TACIS) as well as in the co-operation programmes all of them established by the European Commission. It is worth to point out the active role of ENRESA within the European Consortium CASSIOPEE, formed in 1993 by the six radioactive waste management companies in existence in the European Union at that time. CASSIOPEE was created to assist the European Commission in the area of radioactive waste management of the PHARE and TACIS technical assistance programmes. (Author)

  4. 7 CFR 1470.8 - Technical and other assistance.

    Science.gov (United States)

    2010-01-01

    ... potential applicants dealing with the requirements of certification under the National Organic Program and... 652. (b) NRCS retains approval authority over certification of work done by non-NRCS personnel for the... production system, including specialty crop and organic production. In providing technical assistance to...

  5. RANET technical guidelines: Interim technical guidelines for national assistance capabilities. Emergency preparedness and response. Date effective: 1 January 2007

    International Nuclear Information System (INIS)

    2006-12-01

    The publication is issued as an attachment to EPR-RANET (2006) and has the same status. It provides administrative and technical guidelines for National Assistance Capabilities and enters into effect on 1 January 2007. Additional technical guidelines are under development by assistance work group under international Action Plan for Strengthening the International Preparedness and Response System for Nuclear and Radiological Emergencies. As these are finalised they will be included in this document

  6. Final priority; Technical Assistance on State Data Collection--IDEA Data Management Center. Final priority.

    Science.gov (United States)

    2014-08-05

    The Assistant Secretary for the Office of Special Education and Rehabilitative Services (OSERS) announces a priority under the Technical Assistance on State Data Collection program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to fund a cooperative agreement to establish and operate an IDEA Data Management Center (Center) that will provide technical assistance (TA) to improve the capacity of States to meet the data collection requirements of the Individuals with Disabilities Education Act (IDEA).

  7. Geothermal direct-heat utilization assistance. Quarterly project progress report, July 1996--September 1996. Federal Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.

    1996-11-01

    This report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the fourth quarter of FY-96. It describes 152 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment, economics and resources. Research activities are summarized on greenhouse peaking. Outreach activities include the publication of a geothermal direct use Bulletin, dissemination of information, geothermal library, technical papers and seminars, and progress monitor reports on geothermal resources and utilization.

  8. Pennsylvania Department of Transportation's Local Technical Assistance Program (LTAP).

    Science.gov (United States)

    2010-11-01

    The Pennsylvania Department of Transportations (PennDOT) Local Technical Assistance Program : (LTAP) was awarded to the Pennsylvania State Association of Township Supervisors (PSATS), with the : contract start date of December 1, 2005. PSATS led t...

  9. 13 CFR 124.704 - What additional management and technical assistance is reserved exclusively for concerns eligible...

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What additional management and.../SMALL DISADVANTAGED BUSINESS STATUS DETERMINATIONS 8(a) Business Development Management and Technical Assistance Program § 124.704 What additional management and technical assistance is reserved exclusively for...

  10. Imprinting disorders after assisted reproductive technologies

    DEFF Research Database (Denmark)

    Lidegaard, Øjvind; Pinborg, Anja; Andersen, Anders Nyboe

    2006-01-01

    To assess the evidence of an increased risk of imprinting diseases in children born after use of assisted reproductive technologies.......To assess the evidence of an increased risk of imprinting diseases in children born after use of assisted reproductive technologies....

  11. Private sector involvement in the US program of technical assistance to IAEA safeguards

    International Nuclear Information System (INIS)

    Pepper, S.E.; Epel, L.; Maise, G.; Reisman, A.; Skalyo, J.

    1995-01-01

    The US Program of Technical Assistance to IAEA Safeguards (POTAS) relies on technical expertise found in the U. S private and public sectors. Since 1993, the international Safeguards Project Office (ISPO) has sought to increase the role of the private sector in POTAS. ISPO maintains and continues to develop a database of US companies interested in providing technical expertise to the IAEA. This database is used by ISPO to find appropriate contractors to respond to IAEA requests for technical assistance when the assistance can be provided by the private sector. The private sector is currently providing support in the development of equipment, training, and procedure preparation. POTAS also supports the work of private consultants. This paper discusses ISPO's efforts to identify suitable vendors and discusses conditions that hinder more substantial involvement by the private sector. In addition, the paper will discuss selected projects that are currently in progress and identify common problems that impede the progress and success of tasks performed by the private sector

  12. Assisted reproductive technology in Europe, 2007

    DEFF Research Database (Denmark)

    de Mouzon, J; Goossens, V; Bhattacharya, S

    2012-01-01

    This 11th European IVF-monitoring report presents the results of assisted reproductive technology (ART) treatments initiated in Europe during 2007.......This 11th European IVF-monitoring report presents the results of assisted reproductive technology (ART) treatments initiated in Europe during 2007....

  13. Training Students as Technology Assistants.

    Science.gov (United States)

    Onishi, Esther; Peto, Erica

    1996-01-01

    Describes a program where fifth and sixth graders are trained as school technology assistants. The childrens' duties include installation of software, making minor repairs, cleaning computer equipment, and assisting teachers and students. Outlines components of the program, lists forms the assistants use and skills they are taught, and provides…

  14. 34 CFR 86.302 - What are the procedures used by the Secretary for providing information or technical assistance?

    Science.gov (United States)

    2010-07-01

    ... providing information or technical assistance? 86.302 Section 86.302 Education Office of the Secretary... information or technical assistance? (a) The Secretary provides information or technical assistance to an IHE in writing, through site visits, or by other means. (b) The IHE shall inform the Secretary of any...

  15. Final priority. Rehabilitation Training: Job-Driven Vocational Rehabilitation Technical Assistance Center. Final priority.

    Science.gov (United States)

    2014-08-19

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Rehabilitation Training program to establish a Job-Driven Vocational Rehabilitation Technical Assistance Center (JDVRTAC). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to focus on training in an area of national need. Specifically, this priority responds to the Presidential Memorandum to Federal agencies directing them to take action to address job-driven training for the Nation's workers. The JDVRTAC will provide technical assistance (TA) to State vocational rehabilitation (VR) agencies to help them develop for individuals with disabilities training and employment opportunities that meet the needs of today's employers.

  16. Care robots for the supermarket shelf: a product gap in assistive technologies.

    Science.gov (United States)

    Blackman, Tim

    2013-07-01

    The literature on the development of assistive robots is dominated by technological papers with little consideration of how such devices might be commercialised for a mass market at a price that is affordable for older people and their families as well as public services and care insurers. This article argues that the focus of technical development in this field is too ambitious, neglecting the potential market for an affordable device that is aleady in the realm of the 'adjacent possible' given current technology capabilities. It also questions on both ethical and marketing grounds the current effort to develop assistive robots with pet-like or human-like features. The marketing literature on 'really new products' has so far not appeared to inform the development of assistive robots but has some important lessons. These include using analogies with existing products and giving particular attention to the role of early adopters. Relevant analogies for care robots are not animals or humans but useful domestic appliances and personal technologies with attractive designs, engaging functionality and intuitive usability. This points to a strategy for enabling mass adoption - which has so far eluded even conventional telecare - of emphasising how such an appliance is part of older people's contemporary lifestyles rather than a sign of age-related decline and loss of independence.

  17. International technical assistance example. Consortium action in Bulgaria; Exemple d`assistance internationale. Cas de la Bulgarie, action du consortium

    Energy Technology Data Exchange (ETDEWEB)

    Mattei, J M; Milhem, J L [CEA Centre d` Etudes de Fontenay-aux-Roses, 92 (France). Inst. de Protection et de Surete Nucleaire; Heuser, F W; Kelm, P [Gesellschaft fuer Reaktorsicherheit mbH (GRS), Koeln (Germany)

    1993-03-01

    The safety status achieved last year at the Kozloduy Nuclear Power Plant (NPP) and the capability of the Bulgarian Nuclear Safety Authority (BNSA) to assess the safety of the plant and the adequacy of proposed improvements have been matters of international concern. However, the Kozloduy NPP contributes 35-40 per cent of the electrical generating capacity in Bulgaria. For further operation of the plants, it is therefore, essential that safety is improved. In july 1991, the Commission of the European Communities (CEC) instituted a Six Months Emergency Action Programme for Bulgaria under the PHARE regional nuclear safety programme. The programme consisted of three parts: - an industrial emergency programme supporting the utility of the Kozloduy NPP, - a study to evaluate Bulgaria`s electricity needs, - technical assistance for reinforcement of the Bulgarian Nuclear Safety Authority. For the third part, complementary to the industrial emergency programme carried out by the WANO (World Association of Nuclear Operators), a Consortium of expert institutions and regulatory from EC member states was established by CEC for assistance to BNSA. The Consortium consisted of: - Institut de Protection et de Surete Nucleaire (IPSN), France, technical support of the French regulatory body, - Gesellschaft fur Anlagen und Reaktorsicherheit (GRS) mbH, Germany, an organization in safety engineering, technical support of governmental regulatory body, - AIB-Vincotte Nuclear (AVN), Belgium, the organization authorized by the Belgian Government for licensing and inspection of nuclear power plants, - UK Atomic Energy Authority (AEA Technology), an independent UK Government owned nuclear R and D and consultancy organization, - Nuclear Installations Inspectorate (NII) of the Health and Safety Executive, United Kingdom, the nuclear regulatory body for the United Kingdom.

  18. Assisted Reproductive Technologies : Implications for Women's ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Assisted Reproductive Technologies : Implications for Women's Reproductive Rights and Social Citizenship. There is a general perception that assisted reproductive technologies (ARTs) affect only a small number of affluent women in India. However, the ART industry - tied as it is to the vigorously pushed medical tourism ...

  19. Assisted reproductive technology in Europe, 2008

    DEFF Research Database (Denmark)

    Ferraretti, A P; Goossens, V; de Mouzon, J

    2012-01-01

    This 12th European IVF-monitoring (EIM) report presents the results of treatments involving assisted reproductive technology (ART) initiated in Europe during 2008.......This 12th European IVF-monitoring (EIM) report presents the results of treatments involving assisted reproductive technology (ART) initiated in Europe during 2008....

  20. [Horus: technological innovation in pharmaceutical assistance within the Brazilian unified health system].

    Science.gov (United States)

    Costa, Karen Sarmento; Nascimento, José Miguel do

    2012-12-01

    To analyze results of the Horus Information System, comparing elements of this system with some international experiences. Horus is a technological innovation introduced in 2009 in the Pharmaceutical management information system of the Sistema Único de Saúde (Brazilian Unified Health System). In 2011, local managers and health professionals of 1,247 municipalities (16 states) that adhered to Horus answered questionnaires on pharmaceutical assistance in primary care and about the Horus system. This is a descriptive and exploratory study, developed with the use of quantitative and qualitative methods of research. Multivariate tools were used for data collection and interpretative support of the statistical inference and thematic analysis. The main changes identified after the implementation of this system were: improvement on technical and scientific quality control of Pharmaceutical Assistance, improvement on the supply of medications and health care; training of human resources and knowledge management; improvement on the relationship health managers/users; development in the administrative management and greater inter-state management; and improvement on the technological infrastructure. In terms of health information systems, these categories are consistent with programs and obstacles observed in international experiences. The biggest gap identified was the fact that Horus was not included in a national policy of health information systems, which is in a process of consolidation in Brazil. The national database of actions and services within the Pharmaceutical Assistance will enable the collection, analysis and dissemination of information regarding integrated pharmaceutical assistance in the Brazilian context. The Horus System is a technological innovation that enables the management of the Pharmaceutical Assistance. The national base will enable the definition and agreement on national indicators of Pharmaceutical Assistance, aiming to produce evidence of

  1. 76 FR 41293 - Solicitation of Proposals for Technical Assistance Funding From the Native American Business...

    Science.gov (United States)

    2011-07-13

    ... for NABDI Technical Assistance Funding D. Submission of Application in Digital Format E. Application.... The IEED has spent considerable time and expense in collecting digital land grids, geographic...: Marketing studies. 9. What the NABDI Technical Assistance Funding Cannot Fund As stated above, these funds...

  2. 77 FR 34354 - Notice Inviting Informal Public Comment on Training and Technical Assistance and Disability...

    Science.gov (United States)

    2012-06-11

    ... and Technical Assistance and Disability Inclusion Programming AGENCY: Corporation for National and... implementation of a unified training and technical assistance (TTA) strategy and disability inclusion programming... to CNCS as we plan and prepare for this work. We will accept comments in writing, as described below...

  3. Turning Technologies into Businesses- The Challenge for the Technical Entrepreneur

    Science.gov (United States)

    Glass, Alexander

    2000-03-01

    Over the past twenty-five years, new businesses based on innovative technology have been the driving force for the US economy. Due to the abundance of early-stage capital, each year, thousands of scientists and engineers receive support to start new, technology-based businesses. However, the transition from technologist to entrepreneur is often difficult. It requires a shift in emphasis from a technology focus to a market focus. We shall discuss the challenges facing the technical entrepreneur in launching a new enterprise, and a variety of resources that are available to help the entrepreneur succeed. Many technologists fall victim to the myth that if you ``build a better mousetrap, the world will beat a path to your door." To be sure, it is important to base your business on sound technology that offers a clear advantage over current practice, and, if possible, to secure title to the technology, either by obtaining patent protection, or securing an exclusive license. Once that is done, however, the principal concern of the fledgling enterprise is building a business and obtaining the financial resources to enable it to grow. The entrepreneur must develop a clear and compelling business model, that can be communicated to a non-technical investor in a few minutes. This requires a mode of thinking and expression quite different from that commonly used in engineering or scientific discussions. Fortunately, abundant resources are available to help the technologist become a successful entrepreneur. We shall discuss the kinds of assistance that are generally available through local and national programs, and give specific examples based on the activities of the Bay Area Regional Technology Alliance in northern California.

  4. Assistive Technology: What Physical Educators Need to Know

    Science.gov (United States)

    Laughlin, Michael K.; Murata, Nathan M.; Gonnelli, Michele; Larranaga, John

    2018-01-01

    Assistive technology supplements and supports the learning of students with disabilities in school and at home. Thanks to federal mandates, students with disabilities receive consideration for assistive technology devices and services--the tools and supports needed to achieve determined learning outcomes. Assistive technology devices and services…

  5. 13 CFR 124.701 - What is the purpose of the 7(j) management and technical assistance program?

    Science.gov (United States)

    2010-01-01

    ...) Business Development Management and Technical Assistance Program § 124.701 What is the purpose of the 7(j... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What is the purpose of the 7(j) management and technical assistance program? 124.701 Section 124.701 Business Credit and Assistance SMALL...

  6. Improving Forsyth Technical Community College's Ability to Develop and Maintain Partnerships: Leveraging Technology to Develop Partnerships

    Science.gov (United States)

    Murdock, Alan K.

    2017-01-01

    Forsyth Technical Community College (FTCC) face a shortage of funding to meet the demands of students, faculty, staff and businesses. Through this practitioner research, the utilization of the college's current customer relationship management (CRM) database advanced. By leveraging technology, the researcher assisted the college in meeting the…

  7. Integrating medical, assistive, and universal design products and technologies: Assistive Technology Service Method (ATSM).

    Science.gov (United States)

    Elsaesser, Linda-Jeanne; Bauer, Stephen

    2012-07-01

    ISO26000 provides guidance on effective organizational performance that recognizes social responsibility (including rights of persons with disabilities (PWD)), engages stakeholders, and contributes to sustainable development [1]. Millennium Development Goals 2010 state: while progress has been made, insufficient dedication to sustainable development, and inequalities to the most vulnerable people require attention [2]. World Report on Disability 2011 recommendations includes improved data collection and removal of barriers to rehabilitation that empower PWD [3]. The Assistive Technology Service Method (ATSM), Assistive Technology Device Classification (ATDC) and Matching Person and Technology (MPT) provide an evidence-based, standardized, internationally comparable framework to improve rehabilitation interventions [4-6]. The ATSM and ATDC support universal design (UD) principles and provision of universal technology. The MPT assures interventions are effective and satisfactory to end-users [7]. The ICF conceptual framework and common language are used throughout [8]. Research findings on healthcare needs are translated. ATSM applications in support of these findings are presented. National initiatives demonstrate the need and value of the ATSM as an evidence-based, user-centric, interdisciplinary method to improve individual and organizational performance for rehabilitation [including AT] services. Two Disability & Rehabilitation: Assistive Technology articles demonstrate ATSM and ATDC use to strengthen rehabilitation services and integrate Universal Design principles for socially responsible behavior.

  8. Geothermal direct-heat utilization assistance: Federal assistance program. Quarterly project progress report, October--December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the first quarter of FY-96. It describes 90 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment and resources. Research activities are summarized on low-temperature resource assessment, geothermal district heating system cost evaluation and silica waste utilization project. Outreach activities include the publication of a geothermal direct use Bulletin, dissemination of information, geothermal library, technical papers and seminars, development of a webpage, and progress monitor reports on geothermal resources and utilization.

  9. Technical quality assurance in conventional radiography by X-ray assistants

    International Nuclear Information System (INIS)

    Juran, R.; Buehler, G.; Schmidt, D.

    1989-01-01

    Without the X-ray assistant, regularly involved in everyday practice, technical quality assurance can hardly be accomplished. Therefore a model for the organization of quality assurance was developed and tested in practice. It implies accountable technical checks by the technician, that are controlled by a quality supervisor, and are subsequently evaluated by the radiation physics department. This positively influences quality consciousness of the radiographers and therefore the quality itself. (author)

  10. Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015-2016.

    Science.gov (United States)

    Chiappone, Alethea; Smith, Teresa M; Estabrooks, Paul A; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

    2018-04-26

    The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015-2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily general information rather than tailored technical assistance. Technical

  11. Technical writing in the radiologic technology curriculum.

    Science.gov (United States)

    Bell, R

    1979-01-01

    Although courses in technical writing are no longer suggested in the Curriculum Guide for Programs in Radiologic Technology, the writer believes that writing is essential to the growth of the profession and development of the professional. Emphasis is placed on some of the benefits that accrue to students who are exposed to technical writing as part of their technology curriculum.

  12. Training and technical assistance to enhance capacity building between prevention research centers and their partners.

    Science.gov (United States)

    Spadaro, Antonia J; Grunbaum, Jo Anne; Dawkins, Nicola U; Wright, Demia S; Rubel, Stephanie K; Green, Diane C; Simoes, Eduardo J

    2011-05-01

    The Centers for Disease Control and Prevention has administered the Prevention Research Centers Program since 1986. We quantified the number and reach of training programs across all centers, determined whether the centers' outcomes varied by characteristics of the academic institution, and explored potential benefits of training and technical assistance for academic researchers and community partners. We characterized how these activities enhanced capacity building within Prevention Research Centers and the community. The program office collected quantitative information on training across all 33 centers via its Internet-based system from April through December 2007. Qualitative data were collected from April through May 2007. We selected 9 centers each for 2 separate, semistructured, telephone interviews, 1 on training and 1 on technical assistance. Across 24 centers, 4,777 people were trained in 99 training programs in fiscal year 2007 (October 1, 2006-September 30, 2007). Nearly 30% of people trained were community members or agency representatives. Training and technical assistance activities provided opportunities to enhance community partners' capacity in areas such as conducting needs assessments and writing grants and to improve the centers' capacity for cultural competency. Both qualitative and quantitative data demonstrated that training and technical assistance activities can foster capacity building and provide a reciprocal venue to support researchers' and the community's research interests. Future evaluation could assess community and public health partners' perception of centers' training programs and technical assistance.

  13. Principles for fostering the transdisciplinary development of assistive technologies.

    Science.gov (United States)

    Boger, Jennifer; Jackson, Piper; Mulvenna, Maurice; Sixsmith, Judith; Sixsmith, Andrew; Mihailidis, Alex; Kontos, Pia; Miller Polgar, Janice; Grigorovich, Alisa; Martin, Suzanne

    2017-07-01

    Developing useful and usable assistive technologies often presents complex (or "wicked") challenges that require input from multiple disciplines and sectors. Transdisciplinary collaboration can enable holistic understanding of challenges that may lead to innovative, impactful and transformative solutions. This paper presents generalised principles that are intended to foster transdisciplinary assistive technology development. The paper introduces the area of assistive technology design before discussing general aspects of transdisciplinary collaboration followed by an overview of relevant concepts, including approaches, methodologies and frameworks for conducting and evaluating transdisciplinary working and assistive technology design. The principles for transdisciplinary development of assistive technologies are presented and applied post hoc to the COACH project, an ambient-assisted living technology for guiding completion of activities of daily living by older adults with dementia as an illustrative example. Future work includes the refinement and validation of these principles through their application to real-world transdisciplinary assistive technology projects. Implications for rehabilitation Transdisciplinarity encourages a focus on real world 'wicked' problems. A transdisciplinary approach involves transcending disciplinary boundaries and collaborating with interprofessional and community partners (including the technology's intended users) on a shared problem. Transdisciplinarity fosters new ways of thinking about and doing research, development, and implementation, expanding the scope, applicability, and commercial viability of assistive technologies.

  14. Gender, Technology, and the History of Technical Communication.

    Science.gov (United States)

    Durack, Katherine T.

    1997-01-01

    Considers why women have been absent from the history of technical communication. Discusses research from the history of technology suggesting that notions of "technology,""work," and "workplace" may be gendered terms. Concludes with several suggestions for defining technical communication so that significant works of…

  15. Socio-technical barriers to the use of energy-efficient timber drying technology in New Zealand

    International Nuclear Information System (INIS)

    Bell, Martha; Carrington, Gerry; Lawson, Rob; Stephenson, Janet

    2014-01-01

    This study of industrial energy behaviours identifies barriers to the use of energy-efficient drying technology in the New Zealand timber industry, and explores these barriers through the “energy cultures” lens. Vented kiln dryers were preferred by larger firms and heat pump kiln dryers were used by smaller firms. Although few firms could specify all their costs, we found no significant differences in the average operating costs, drying costs or commercial success of the larger and smaller firms. We found that socio-technical barriers create “energy cultures” at the level of both the firm and the sector, supporting the dominance of vented kiln dryers. The prevailing technologies, practices and norms at the sector level strongly support vented kilns, the status quo being embedded in the socio-technical context, hindering technological learning, improved energy efficiency and innovation. Influential stakeholders in the industry were thus part of, and locked into, the industry-wide energy culture, and were not in a position to effect change. We conclude that actors external to the prevailing industry energy culture need to leverage change in the industry norms, practices and/or technologies in order to reap the advantages of energy-efficient drying technology, assist its continued evolution and avoid the risks of path-dependency. - Highlights: • Firms processing timber in New Zealand use two main drying technologies. • Relatively inefficient vented dryers dominate over energy-efficient heat pumps. • Operating costs are similar but the socio-technical regime supports vented dryers. • Stasis is created by fixed energy cultures both within firms and across the sector. • Stasis hampers technical development in heat pump drying and business innovation

  16. 7 CFR 652.4 - Technical service standards.

    Science.gov (United States)

    2010-01-01

    ... technologies and practices. (c) A technical service provider must assume responsibility in writing for the... 7 Agriculture 6 2010-01-01 2010-01-01 false Technical service standards. 652.4 Section 652.4..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.4...

  17. Selling Technology in Technical Advertisements: A Case Study.

    Science.gov (United States)

    Guthrie, James R.

    1995-01-01

    Argues that, as the category of "technical products" has expanded and the public's enthusiasm for such products has lessened, marketing writers have begun to reconsider their approaches to technology in ads. Studies two technical ads in detail, and compares the ways in which they portray technology. (SR)

  18. Technical assistance from state health departments for communities engaged in policy, systems, and environmental change: the ACHIEVE Program.

    Science.gov (United States)

    Hefelfinger, Jenny; Patty, Alice; Ussery, Ann; Young, Walter

    2013-10-24

    This study assessed the value of technical assistance provided by state health department expert advisors and by the staff of the National Association of Chronic Disease Directors (NACDD) to community groups that participated in the Action Communities for Health, Innovation, and Environmental Change (ACHIEVE) Program, a CDC-funded health promotion program. We analyzed quantitative and qualitative data reported by community project coordinators to assess the nature and value of technical assistance provided by expert advisors and NACDD staff and the usefulness of ACHIEVE resources in the development and implementation of community action plans. A grounded theory approach was used to analyze and categorize phrases in text data provided by community coordinators. Open coding placed conceptual labels on text phrases. Frequency distributions of the quantitative data are described and discussed. The most valuable technical assistance and program support resources were those determined to be in the interpersonal domain (ie, interactions with state expert advisors, NACDD staff, and peer-to-peer support). The most valuable technical assistance events were action institutes, coaches' meetings, webinars, and technical assistance conference calls. This analysis suggests that ACHIEVE communities valued the management and training assistance provided by expert advisors and NACDD staff. State health department expert advisors provided technical guidance and support, including such skills or knowledge-based services as best-practice strategies, review and discussion of community assessment data, sustainability planning, and identification of possible funding opportunities. NACDD staff led development and implementation of technical assistance events.

  19. Assistive Technology: Use and Service Delivery

    Directory of Open Access Journals (Sweden)

    Roya Ghasemzadeh

    2010-04-01

    Full Text Available As individuals with long-term disabilities and other older adults face declines in health and function, there is a greater need for assistive technology (AT or assistive devices and environmental interventions (EI to help them maintain their independence and community participation. These aids can help older adults and individuals with disabilities function in work, home, recreational, and other community settings as they encounter age related or disability related changes. Assistive Technology refers to products, devices or equipment that are used to maintain, increase or improve the functional capabilities of people with disabilities. A thorough assessment of the individual’s preferences and needs must be conducted before an assistive device is obtained. If one type of device is inadequate to meet an individual’s needs, it should not be assumed that there are no viable alternatives. Individuals’ use of AT and the type of technology used may change over time or as they age. Low-tech aids, such as canes or walkers, or high-tech aids, such as manual or power wheelchairs or scooters, are used to help individuals achieve mobility. Assistive Technologies to aid in communication currently range from low-tech devices such as books to high-tech, augmentative communication devices, which are computers. Computer technology can help individuals become more independent and can enhance their ability to overcome a wide range of limitations. Accessibility can involve more than architectural structure. AT for use in the environment can also increase individuals’ ability to function within their environment. Advancements in AT will occur in the technology itself, the services associated with the technology, and in the government policies and programs relative to AT. There will more widespread use of universal design, with less special-purpose AT required.

  20. The power of a collaborative relationship between technical assistance providers and community prevention teams: A correlational and longitudinal study.

    Science.gov (United States)

    Chilenski, Sarah M; Perkins, Daniel F; Olson, Jonathan; Hoffman, Lesa; Feinberg, Mark E; Greenberg, Mark; Welsh, Janet; Crowley, D Max; Spoth, Richard

    2016-02-01

    Historically, effectiveness of community collaborative prevention efforts has been mixed. Consequently, research has been undertaken to better understand the factors that support their effectiveness; theory and some related empirical research suggests that the provision of technical assistance is one important supporting factor. The current study examines one aspect of technical assistance that may be important in supporting coalition effectiveness, the collaborative relationship between the technical assistance provider and site lead implementer. Four and one-half years of data were collected from technical assistance providers and prevention team members from the 14 community prevention teams involved in the PROSPER project. Spearman correlation analyses with longitudinal data show that the levels of the collaborative relationship during one phase of collaborative team functioning associated with characteristics of internal team functioning in future phases. Results suggest that community collaborative prevention work should consider the collaborative nature of the technical assistance provider - prevention community team relationship when designing and conducting technical assistance activities, and it may be important to continually assess these dynamics to support high quality implementation. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Enhancing Effective Stakeholder Participation in Local Groundwater Sustainability Planning through Technical Assistance in California

    Science.gov (United States)

    Weintraub, C.; Christian-Smith, J.; Dobbin, K.; Cullen, K.

    2017-12-01

    This presentation will share content from UCS's new publication, Getting Involved in Groundwater; A Guide to Effective Engagement in California's Groundwater Sustainability Plans, as well as lessons learned from collaborating with community organizations to provide technical assistance to Groundwater Sustainability Agency (GSA) board members and stakeholders in the San Joaquin Valley on Groundwater Sustainability Plan (GSP) development. California's Sustainable Groundwater Management Act (SGMA) mandates extensive stakeholder engagement, presenting an opportunity for unincorporated, low-income communities that have historically been affected by but not included in water decisions. However, implementation requires a concerted, thoughtful effort. Through technical assistance and strategic outreach, the Union of Concerned Scientists (UCS) is working to ensure stakeholder engagement in GSP development is robust, diverse, and supported by the best science available. UCS created the GSP stakeholder engagement guide to equip GSA members, scientists and interested community members to meaningfully engage in the GSP development process. The guide serves as a technical primer on SGMA's GSP process and as a resource for understanding groundwater management in California. The guide is just one component of a larger effort to overcome barriers to effective engagement in sustainable groundwater management, especially those presented by technical information. In April, UCS co-hosted a technical assistance workshop for GSA and advisory committee members in Visalia, CA with the Community Water Center (CWC), a local environmental justice non-profit. The workshop was well received and UCS and the CWC were invited to host a second workshop in June. To deepen this engagement and provide one-on-one technical assistance, UCS developed a program to match relevant water experts in the UCS Science Network with GSA members or involved community members in need of specific technical support

  2. Assistive Technologies to Empower Children with ADHD

    DEFF Research Database (Denmark)

    Sonne, Tobias

    HCI researchers have for several years explored the potentials of using technology to empower people with various disabilities and deficits in dealing with the challenges of their condition. The exploration initially focused on designing technologies for people with outwardly visible physical...... impairments and disabilities, however, in recent years HCI researchers have begun to focus on assistive technologies for other patient groups and less visible impairments, e.g., people with cognitive or mental disorders. This movement has led to the design and development of several successful assistive...... technologies for a broad range of patient groups struggling with e.g., Bipolar Disorder, Autism Spectrum Disorder (ASD), and anxiety. However, only very limited research within HCI has focused on assistive technologies for the most common diagnosis for children and teens worldwide – Attention Deficit...

  3. SCFA lead lab technical assistance at Oak Ridge Y-12 nationalsecurity complex: Evaluation of treatment and characterizationalternatives of mixed waste soil and debris at disposal area remedialaction DARA solids storage facility (SSF)

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, Terry

    2002-08-26

    On July 17-18, 2002, a technical assistance team from the U.S. Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) met with the Bechtel Jacobs Company Disposal Area Remedial Action (DARA) environmental project leader to review treatment and characterization options for the baseline for the DARA Solids Storage Facility (SSF). The technical assistance request sought suggestions from SCFA's team of technical experts with experience and expertise in soil treatment and characterization to identify and evaluate (1) alternative treatment technologies for DARA soils and debris, and (2) options for analysis of organic constituents in soil with matrix interference. Based on the recommendations, the site may also require assistance in identifying and evaluating appropriate commercial vendors.

  4. Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy

    DEFF Research Database (Denmark)

    Gjeraa, Kirsten; Mundt, Anna S.; Spanager, Lene

    2017-01-01

    Background Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived...... with complementary and overlapping scopes of practice between surgical and anesthesia subteams. Conclusions This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important...... by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. Methods This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data...

  5. The Distinction Between Curative and Assistive Technology.

    Science.gov (United States)

    Stramondo, Joseph A

    2018-05-01

    Disability activists have sometimes claimed their disability has actually increased their well-being. Some even say they would reject a cure to keep these gains. Yet, these same activists often simultaneously propose improvements to the quality and accessibility of assistive technology. However, for any argument favoring assistive over curative technology (or vice versa) to work, there must be a coherent distinction between the two. This line is already vague and will become even less clear with the emergence of novel technologies. This paper asks and tries to answer the question: what is it about the paradigmatic examples of curative and assistive technologies that make them paradigmatic and how can these defining features help us clarify the hard cases? This analysis will begin with an argument that, while the common views of this distinction adequately explain the paradigmatic cases, they fail to accurately pick out the relevant features of those technologies that make them paradigmatic and to provide adequate guidance for parsing the hard cases. Instead, it will be claimed that these categories of curative or assistive technologies are defined by the role the technologies play in establishing a person's relational narrative identity as a member of one of two social groups: disabled people or non-disabled people.

  6. 45 CFR 2524.10 - For what purposes will technical assistance and training funds be made available?

    Science.gov (United States)

    2010-10-01

    ... OTHER SPECIAL GRANTS § 2524.10 For what purposes will technical assistance and training funds be made... 45 Public Welfare 4 2010-10-01 2010-10-01 false For what purposes will technical assistance and training funds be made available? 2524.10 Section 2524.10 Public Welfare Regulations Relating to Public...

  7. SCFA lead lab technical assistance at Lawrence Berkeley National Laboratory: Baseline review of three groundwater plumes

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, Terry; et al.

    2002-09-26

    During the closeout session, members of the technical assistance team conveyed to the site how impressed they were at the thoroughness of the site's investigation and attempts at remediation. Team members were uniformly pleased at the skilled detection work to identify sources, make quick remediation decisions, and change course when a strategy did not work well. The technical assistance team also noted that, to their knowledge, this is the only DOE site at which a world-class scientist has had primary responsibility for the environmental restoration activities. This has undoubtedly contributed to the successes observed and DOE should take careful note. The following overall recommendations were agreed upon: (1) The site has done a phenomenal job of characterization and identifying and removing source terms. (2) Technologies selected to date are appropriate and high impact, e.g. collection trenches are an effective remedial strategy for this complicated geology. The site should continue using technology that is adapted to the site's unique geology, such as the collection trenches. (3) The site should develop a better way to determine the basis of cleanup for all sites. (4) The sentinel well system should be evaluated and modified, if needed, to assure that the sentinel wells provide coverage to the current site boundary. Potential modifications could include installation, abandonment or relocation of wells based on the large amount of data collected since the original sentinel well system was designed. (5) Modeling to assist in remedial design and communication should continue. (6) The site should develop a plan to ensure institutional memory. (7) The most likely possibility for improving closure to 2006 is by removing the residual source of the Old Town plume and establishing the efficacy of remediation for the 51/64 plume.

  8. Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015–2016

    Science.gov (United States)

    Smith, Teresa M.; Estabrooks, Paul A.; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

    2018-01-01

    Purpose and Objectives The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. Intervention Approach We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015–2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. Evaluation Methods We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Results Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily

  9. 34 CFR 300.6 - Assistive technology service.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Assistive technology service. 300.6 Section 300.6 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION... selection, acquisition, or use of an assistive technology device. The term includes— (a) The evaluation of...

  10. Model of Providing Assistive Technologies in Special Education Schools.

    Science.gov (United States)

    Lersilp, Suchitporn; Putthinoi, Supawadee; Chakpitak, Nopasit

    2015-05-14

    Most students diagnosed with disabilities in Thai special education schools received assistive technologies, but this did not guarantee the greatest benefits. The purpose of this study was to survey the provision, use and needs of assistive technologies, as well as the perspectives of key informants regarding a model of providing them in special education schools. The participants were selected by the purposive sampling method, and they comprised 120 students with visual, physical, hearing or intellectual disabilities from four special education schools in Chiang Mai, Thailand; and 24 key informants such as parents or caregivers, teachers, school principals and school therapists. The instruments consisted of an assistive technology checklist and a semi-structured interview. Results showed that a category of assistive technologies was provided for students with disabilities, with the highest being "services", followed by "media" and then "facilities". Furthermore, mostly students with physical disabilities were provided with assistive technologies, but those with visual disabilities needed it more. Finally, the model of providing assistive technologies was composed of 5 components: Collaboration; Holistic perspective; Independent management of schools; Learning systems and a production manual for users; and Development of an assistive technology center, driven by 3 major sources such as Government and Private organizations, and Schools.

  11. Assistive Technology for Individuals with Special Seeds

    Directory of Open Access Journals (Sweden)

    Adrian Lupasc

    2015-09-01

    Full Text Available Disabled people face barriers in performing their various activities, including teaching. By using assistive technologies for different activities, people with disabilities may be able to perform a wider range of tasks independently. Fortunately, it helps to reduce many of these barriers, but, unfortunately, disabled people (learning, autism or ADHD face a variety of barriers when they want to use software tools or hardware devices. In this regard, assistive technologies are available to help persons with different types of disabilities, from cognitive problems to physical impairment. Hardware devices and software tools (known as adaptive or assistive technologies have been developed to provide functional alternatives for all individuals with disabilities, depending on the type of disability. In addition, the use of assistive technologies to support them is an effective approach for many persons with disabilities, regardless of the type of disability. Additionally, individuals with disabilities often experience greater success when they are allowed to use their abilities to work around their disabilities (the challenges they imply. Moreover, mobile devices are useful for their ability to weave Internet access and social networking into the daily life. To the people with disabilities, these devices have the potential to unlock unprecedented new possibilities for communication or navigation. In this context, some actual assistive technology and approaches to use them are described in this paper.

  12. Continued benefits of a technical assistance web site to local tobacco control coalitions during a state budget shortfall.

    Science.gov (United States)

    Buller, David B; Young, Walter F; Bettinghaus, Erwin P; Borland, Ron; Walther, Joseph B; Helme, Donald; Andersen, Peter A; Cutter, Gary R; Maloy, Julie A

    2011-01-01

    A state budget shortfall defunded 10 local tobacco coalitions during a randomized trial but defunded coalitions continued to have access to 2 technical assistance Web sites. To test the ability of Web-based technology to provide technical assistance to local tobacco control coalitions. Randomized 2-group trial with local tobacco control coalitions as the unit of randomization. Local communities (ie, counties) within the State of Colorado. Leaders and members in 34 local tobacco control coalitions funded by the state health department in Colorado. Two technical assistance Web sites: A Basic Web site with text-based information and a multimedia Enhanced Web site containing learning modules, resources, and communication features. Use of the Web sites in minutes, pages, and session and evaluations of coalition functioning on coalition development, conflict resolution, leadership satisfaction, decision-making satisfaction, shared mission, personal involvement, and organization involvement in survey of leaders and members. Coalitions that were defunded but had access to the multimedia Enhanced Web site during the Fully Funded period and after defunding continued to use it (treatment group × funding status × period, F(3,714) = 3.18, P = .0234). Coalitions with access to the Basic Web site had low Web site use throughout and use by defunded coalitions was nearly zero when funding ceased. Members in defunded Basic Web site coalitions reported that their coalitions functioned worse than defunded Enhanced Web site coalitions (coalition development: group × status, F(1,360) = 4.81, P = .029; conflict resolution: group × status, F(1,306) = 5.69, P = .018; leadership satisfaction: group × status, F(1,342) = 5.69, P = .023). The Enhanced Web site may have had a protective effect on defunded coalitions. Defunded coalitions may have increased their capacity by using the Enhanced Web site when fully funded or by continuing to use the available online resources after defunding

  13. Designing and Implementing an Assistive Technology Lab for Postsecondary Education

    Science.gov (United States)

    Jones, Beth; Williams, Nichole; Rudinger, Belinda

    2018-01-01

    A literature review discusses how teacher knowledge of assistive technology significantly impacts student success with assistive technology and that many teachers enter the field feeling unprepared to implement these technologies with students. This article explores one university's process in setting up an assistive technology laboratory for…

  14. Assistive technology for memory support in dementia.

    Science.gov (United States)

    Van der Roest, Henriëtte G; Wenborn, Jennifer; Pastink, Channah; Dröes, Rose-Marie; Orrell, Martin

    2017-06-11

    maintained by the Information Specialists of the CDCIG and contains studies in the areas of dementia prevention, dementia treatment and cognitive enhancement in healthy people. We also searched the following list of databases, adapting the search strategy as necessary: Centre for Reviews and Dissemination (CRD) Databases, up to May 2016; The Collection of Computer Science Bibliographies; DBLP Computer Science Bibliography; HCI Bibliography: Human-Computer Interaction Resources; and AgeInfo, all to June 2016; PiCarta; Inspec; Springer Link Lecture Notes; Social Care Online; and IEEE Computer Society Digital Library, all to October 2016; J-STAGE: Japan Science and Technology Information Aggregator, Electronic; and Networked Computer Science Technical Reference Library (NCSTRL), both to November 2016; Computing Research Repository (CoRR) up to December 2016; and OT seeker; and ADEAR, both to February 2017. In addition, we searched Google Scholar and OpenSIGLE for grey literature. We intended to review randomised controlled trials (RCTs) and clustered randomised trials with blinded assessment of outcomes that evaluated an electronic assistive device used with the single aim of supporting memory function in people diagnosed with dementia. The control interventions could either be 'care (or treatment) as usual' or non-technological psychosocial interventions (including interventions that use non-electronic assistive devices) also specifically aimed at supporting memory. Outcome measures included activities of daily living, level of dependency, clinical and care-related outcomes (for example admission to long-term care), perceived quality of life and well-being, and adverse events resulting from the use of AT; as well as the effects of AT on carers. Two review authors independently screened all titles and abstracts identified by the search. We identified no studies which met the inclusion criteria. This review highlights the current lack of high-quality evidence to determine

  15. Fifty years of Technical Cooperation

    International Nuclear Information System (INIS)

    2007-01-01

    The International Atomic Energy Agency (IAEA) was established in Vienna in 1957. The Statute of the IAEA, approved by 81 nations, founded the organization on three pillars: nuclear verification; safety and security; and the transfer of technology. Today, these three pillars still remain at the heart of the organization's work. However, the way in which the IAEA carries out this work, particularly with regard to technology transfer, has changed greatly over the years. When the IAEA opened for business, nuclear science and technology were in their infancy. Many Member States had no nuclear capacity at all. The IAEA's 'technical assistance' programme, as it was then known, was modest. Early projects were small in scale and short lived, focusing mainly on building human capacities and creating institutions and facilities that would support the introduction of nuclear technology in a safe and effective manner. Today, the picture is more complex. Instead of merely offering assistance, the IAEA focuses on cooperation for sustainable socioeconomic development, building on the skills and infrastructure that Member States have acquired over the past five decades. Member States are full partners in the process, guiding the IAEA's technical cooperation activities, setting national and regional priorities, and offering training opportunities and technical support to the IAEA and to other Member States. Technical cooperation between developing countries is facilitated and supported through regional cooperative agreements. Regional centres of expertise play an important role in sharing the benefits of nuclear science and technology among Member States

  16. Information technologies in technical education

    OpenAIRE

    Кравченя, Э. М.

    2013-01-01

    The purpose of researches is working out of the concept of filling of discipline «Information and computer technologies in formation» the first step of higher education entered into curricula was at engineering-pedagogical faculty BNTU. It is shown that as a result of discipline studying there is an expansion of outlook and formation at students of technical college of independent thinking in the field of modern and perspective information technology.

  17. Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

    Science.gov (United States)

    Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

    2016-01-01

    The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

  18. 78 FR 31535 - Assistive Technology Alternative Financing Program

    Science.gov (United States)

    2013-05-24

    ... DEPARTMENT OF EDUCATION Assistive Technology Alternative Financing Program AGENCY: Office of Special Education and Rehabilitative Services, Department of Education. ACTION: Notice. Catalog of Federal... developed for the Assistive Technology (AT) Alternative Financing Program (AFP) in fiscal year (FY) 2012 to...

  19. Examining the Highs and Lows of the Collaborative Relationship Between Technical Assistance Providers and Prevention Implementers.

    Science.gov (United States)

    Chilenski, Sarah M; Welsh, Janet; Olson, Jonathan; Hoffman, Lesa; Perkins, Daniel F; Feinberg, Mark E

    2018-02-01

    The PROSPER model uses a three-tiered community partnership, university researcher, and Cooperative Extension-based technical assistance system to support the delivery of evidence-based interventions in communities. This study examines the trajectory and predictors of the collaborative relationship between technical assistance providers and community teams across the three phases of organization, implementation, and sustainability. Members of 14 PROmoting School-university-community Partnerships to Enhance Resilience (PROSPER) community teams and directors of local agencies rated communities' levels of readiness and adolescent substance use norms. Technical assistance providers rated their collaborative relationship with their teams at 14 occasions across 4.5 years. Results from mixed models show that levels of collaboration were stable until the sustainability phase, when they increased significantly. Team differences in change were significant during the implementation phase. Community readiness predicted levels of the collaborative relationship over time: high community readiness was associated with a high level of collaboration during organization, but a decline in collaboration during implementation. These results provide a more nuanced understanding of the relationship between technical assistance provision and community prevention teams and lead to recommendations to improve dissemination models to achieve a greater public health impact.

  20. Assistive technology policy: a position paper from the first global research, innovation, and education on assistive technology (GREAT) summit.

    Science.gov (United States)

    MacLachlan, Malcolm; Banes, David; Bell, Diane; Borg, Johan; Donnelly, Brian; Fembek, Michael; Ghosh, Ritu; Gowran, Rosemary Joan; Hannay, Emma; Hiscock, Diana; Hoogerwerf, Evert-Jan; Howe, Tracey; Kohler, Friedbert; Layton, Natasha; Long, Siobhán; Mannan, Hasheem; Mji, Gubela; Odera Ongolo, Thomas; Perry, Katherine; Pettersson, Cecilia; Power, Jessica; Delgado Ramos, Vinicius; Slepičková, Lenka; Smith, Emma M; Tay-Teo, Kiu; Geiser, Priscille; Hooks, Hilary

    2018-07-01

    Increased awareness, interest and use of assistive technology (AT) presents substantial opportunities for many citizens to become, or continue being, meaningful participants in society. However, there is a significant shortfall between the need for and provision of AT, and this is patterned by a range of social, demographic and structural factors. To seize the opportunity that assistive technology offers, regional, national and sub-national assistive technology policies are urgently required. This paper was developed for and through discussion at the Global Research, Innovation and Education on Assistive Technology (GREAT) Summit; organized under the auspices of the World Health Organization's Global Collaboration on Assistive Technology (GATE) program. It outlines some of the key principles that AT polices should address and recognizes that AT policy should be tailored to the realities of the contexts and resources available. AT policy should be developed as a part of the evolution of related policy across a number of different sectors and should have clear and direct links to AT as mediators and moderators for achieving the Sustainable Development Goals. The consultation process, development and implementation of policy should be fully inclusive of AT users, and their representative organizations, be across the lifespan, and imbued with a strong systems-thinking ethos. Six barriers are identified which funnel and diminish access to AT and are addressed systematically within this paper. We illustrate an example of good practice through a case study of AT services in Norway, and we note the challenges experienced in less well-resourced settings. A number of economic factors relating to AT and economic arguments for promoting AT use are also discussed. To address policy-development the importance of active citizenship and advocacy, the need to find mechanisms to scale up good community practices to a higher level, and the importance of political engagement for the

  1. Geothermal direct-heat utilization assistance. Quarterly report, October--December 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the first quarter of FY-97. It describes 174 contracts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment, economics and resources. Research activities are summarized on greenhouse peaking. Outreach activities include the publication of a geothermal direct use Bulletin, dissemination of information, geothermal library, technical papers and seminars, and progress monitor reports on geothermal resources and utilization.

  2. Reforming Technical and Technological Education.

    Science.gov (United States)

    Wilson, David N.

    1993-01-01

    Review of technical and technological educational reform in Brazil, Canada, Germany, Great Britain, Indonesia, Malaysia, Singapore, and Sweden shows that reform takes time to complete effectively, long-term approaches are needed, and reform is linked to industrial development, regional cooperation, and decentralized decision making. (SK)

  3. Technical and economic evaluation of selected technologies of the Landfill Characterization System

    Energy Technology Data Exchange (ETDEWEB)

    Floran, R.J.

    1993-12-31

    In 1992 and 1993, numerous innovative and emerging technologies for characterizing metal and mixed waste contaminants and their migration beneath landfills in and environments were field tested at Sandia`s Chemical Waste Landfill. Many of these technologies are being evaluated as part of the Landfill Characterization System (LCS). The LCS emphasizes minimally intrusive technologies and downhole sensors that strive to be cheaper, better, safer and faster than conventional methods. Major aims of the LCS are to demonstrate, test and evaluate these technologies, and determine whether substantial cost saving over traditional baseline methods can be realized. To achieve these goals, the LCS uses an integrated systems approach that stresses the application of complementary and compatible technologies. Successful field demonstrations combined with favorable economics, will greatly assist the commercialization of these technologies to the private sector and to Environmental Restoration groups throughout the DOE Complex. In this paper, a technical and economic evaluation of selected technologies that comprise the LCS is presented. Because sampling and analysis is the most costly part of a characterization effort, the economic evaluation presented here focuses specifically on these activities. LCS technologies discussed include the ``Smart Sampling Methodology`` and two field screening analytical methods, stripping voltammetry and x-ray fluorescence.

  4. Assistive technology and people: a position paper from the first global research, innovation and education on assistive technology (GREAT) summit.

    Science.gov (United States)

    Desmond, Deirdre; Layton, Natasha; Bentley, Jacob; Boot, Fleur Heleen; Borg, Johan; Dhungana, Bishnu Maya; Gallagher, Pamela; Gitlow, Lynn; Gowran, Rosemary Joan; Groce, Nora; Mavrou, Katerina; Mackeogh, Trish; McDonald, Rachael; Pettersson, Cecilia; Scherer, Marcia

    2018-05-17

    Assistive technology (AT) is a powerful enabler of participation. The World Health Organization's Global Collaboration on Assistive Technology (GATE) programme is actively working towards access to assistive technology for all. Developed through collaborative work as a part of the Global Research, Innovation and Education on Assistive Technology (GREAT) Summit, this position paper provides a "state of the science" view of AT users, conceptualized as "People" within the set of GATE strategic "P"s. People are at the core of policy, products, personnel and provision. AT is an interface between the person and the life they would like to lead. People's preferences, perspectives and goals are fundamental to defining and determining the success of AT. Maximizing the impact of AT in enabling participation requires an individualized and holistic understanding of the value and meaning of AT for the individual, taking a universal model perspective, focusing on the person, in context, and then considering the condition and/or the technology. This paper aims to situate and emphasize people at the centre of AT systems: we highlight personal meanings and perspectives on AT use and consider the role of advocacy, empowerment and co-design in developing and driving AT processes.

  5. Can technical laboratory skills be taught at a distance? An analysis of a semiconductor course taught at a distance via interactive technologies

    Science.gov (United States)

    Rao, Lalita

    2000-10-01

    This study investigated extending synchronous distance learning to teaching courses in the psychomotor domain in real-time, with immediate, direct feedback on technical skills performance from an instructor at a remote site via interactive technologies such as videoconferencing. This study focused on two research questions (1) can interactive distance learning technologies be used to teach technical and/or trouble shooting skills that fall under psychomotor domain? and, (2) to what degree can psychomotor skills be taught at a distance? A technical course, "RF Power PC 211L" from a technical and vocational institute was selected and the instructor who had no prior experience in teaching a distance learning course taught the course. Data on cognitive skills, psychomotor technical skills, attitudes and perceptions, demographics as well as boundary conditions on teaching psychomotor skills was gathered from both remote and the main campus. Instruments used for data gathering were final course grades, total points in laboratory exercise, pre and post course surveys, demographic survey and open-ended interviews with the instructor, student and review of instructor journal were used to address the two research questions. The main campus course was taught to the remote campus via distance learning technology in a distance learning format. The main technology used was videoconferencing. Both campus classrooms had the RF Trainer equipment. The rooms were set up to facilitate distance learning in the classroom. The instructor was present only at the main campus. The students on the remote campus were the experimental group. The experimental group participated in all course activities such as demonstrations, laboratory exercises, learning conceptual skills and tests only via distance. These students only had the benefit of laboratory assistant. The role of the laboratory assistant was to assist students/instructor as needed, ensure the safety of students and equipment and

  6. Assisted reproductive technology and major birth defects in Western Australia.

    Science.gov (United States)

    Hansen, Michele; Kurinczuk, Jennifer J; de Klerk, Nicholas; Burton, Peter; Bower, Carol

    2012-10-01

    To estimate the prevalence of major birth defects diagnosed by 6 years of age in all births and terminations of pregnancy for fetal anomaly conceived by assisted reproductive technology (when this included intracytoplasmic sperm injection and in vitro fertilization [IVF]) and the remainder of nonassisted reproductive technology-conceived children born in Western Australia from 1994 to 2002. This retrospective cohort study used data linkage between three population-based registers (Reproductive Technology Register, Western Australian Register of Developmental Anomalies, and Midwives' Notification of Birth System) to identify all assisted reproductive technology (n=2,911) and nonassisted reproductive technology (n=210,997) births with and without birth defects diagnosed by age 6 and all terminations of pregnancy for fetal anomaly. A major birth defect was diagnosed in 8.7% of assisted reproductive technology and 5.4% of nonassisted reproductive technology singletons (odds ratio [OR] 1.53, 95% confidence interval [CI] 1.30-1.79), as well as 7.1% of assisted reproductive technology twins and 5.9% of nonassisted reproductive technology twins of unlike sex (OR 1.08, 95% CI 0.77-1.51). The prevalence of birth defects in assisted reproductive technology singletons and twins decreased markedly over the study period. This change was evident across all three clinics contributing data over the whole study and was particularly marked for children conceived as a result of IVF. There has been a decrease in the prevalence of birth defects over time in children born as a result of assisted reproductive technology in Western Australia; however, the prevalence of major birth defects in assisted reproductive technology singletons remains increased compared with nonassisted reproductive technology singletons. II.

  7. Assisted reproductive technology with donor sperm: national trends and perinatal outcomes.

    Science.gov (United States)

    Gerkowicz, Sabrina A; Crawford, Sara B; Hipp, Heather S; Boulet, Sheree L; Kissin, Dmitry M; Kawwass, Jennifer F

    2018-04-01

    Information regarding the use of donor sperm in assisted reproductive technology, as well as subsequent treatment and perinatal outcomes, remains limited. Outcome data would aid patient counseling and clinical decision making. The objectives of the study were to report national trends in donor sperm utilization and live birth rates of donor sperm-assisted reproductive technology cycles in the United States and to compare assisted reproductive technology treatment and perinatal outcomes between cycles using donor and nondonor sperm. We hypothesize these outcomes to be comparable between donor and nondonor sperm cycles. This was a retrospective cohort study using data from all US fertility centers reporting to the Centers for Disease Control and Prevention's National Assisted Reproductive Technology Surveillance System, accounting for ∼98% of assisted reproductive technology cycles (definition excludes intrauterine insemination). The number and percentage of assisted reproductive technology cycles using donor sperm and rates of pregnancy, live birth, preterm birth (accounting for approximately 6% of all assisted reproductive technology cycles in 2014. Assisted reproductive technology treatment and perinatal outcomes were clinically similar in donor and nondonor sperm cycles. Copyright © 2018 Elsevier Inc. All rights reserved.

  8. 13 CFR 120.714 - How are grants made to non-lending technical assistance providers (NTAP)?

    Science.gov (United States)

    2010-01-01

    ... entity that is not an Intermediary may apply to SBA for a grant to provide marketing, management and... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false How are grants made to non-lending technical assistance providers (NTAP)? 120.714 Section 120.714 Business Credit and Assistance SMALL BUSINESS...

  9. Savannah River Plant, Works Technical Department monthly progress report for March 1956

    International Nuclear Information System (INIS)

    1956-01-01

    This document details activities of the Works Technical Department during the month of March 1956. It covers reactor technology, separations technology, engineering assistance and heavy water technology

  10. Assistive technology for communication of older adults: a systematic review.

    Science.gov (United States)

    Pedrozo Campos Antunes, Thaiany; Souza Bulle de Oliveira, Acary; Hudec, Robert; Brusque Crocetta, Tania; Ferreira de Lima Antão, Jennifer Yohanna; de Almeida Barbosa, Renata Thais; Guarnieri, Regiani; Massetti, Thais; Garner, David M; de Abreu, Luiz Carlos

    2018-02-16

    Describe the use of assistive technology to enhance communication opportunities for older adults. A systematic review was conducted in two databases, PubMed and Web of Science, by using two different searches in each. The search was limited to original articles, in English language, including people aged 60 years and older that used any type of assistive technology for communication. The articles found in the initial search were filtered by title, abstracts and the remaining articles were fully read. Eighteen studies were included in this review after the reading of full-texts. Most of the studies included apparently healthy participants with communication limitations due to aging related changes and the others included people with some pathology that prevent them from normal communication. Four categories of assistive technology were identified: assistive technology for people with speech problems; robot or videoconferencing systems; Information and Communication Technologies and, other types of assistive technology for communication, such as hearing aids and scrapbooks. Assistive technology for communication of older adults is not only used by people with disabilities that prevent them from usual communication. They are mostly for older adults without a pathological communication problem.

  11. How Does Rehabilitative & Assistive Technology Benefit People With Disabilities?

    Science.gov (United States)

    ... institutions Access information through computers and reading Enjoy music, sports, travel, and the arts Participate fully in ... of screen enlargers and magnifiers. 4 Assistive Technology Industry Association. (n.d.). What is assistive technology? How ...

  12. Predicting technology operational availability using technical maturity assessment

    International Nuclear Information System (INIS)

    Kenley, C.R.; Creque, T.R.

    1998-01-01

    A technical maturity assessment method was performed by systems engineers in collaboration with an advisory panel composed of team members from different Department of Energy sites and from different engineering and science disciplines. Various stabilization technologies were assessed annually as to their relative maturity and availability for use in stabilizing nuclear materials. After three years of assessments, several of the technologies are now components of operational systems. A regression analysis of the historical assessments was performed, and it was concluded that the numerical technical maturity score produced by a team of experts can provide a powerful predictor of the time remaining until the operational application of technologies

  13. Performance Analyses in an Assistive Technology Service Delivery Process

    DEFF Research Database (Denmark)

    Petersen, Anne Karin

    Performance Analyses in an Assistive Technology Service Delivery Process.Keywords: process model, occupational performance, assistive technologiesThe Poster is about teaching students, using models and theory in education and practice. It is related to Occupational therapy process and professional...... af top-til-bund, klientcentreret og aktivitetsbaseret interventioner, ERGO/MunksgaardFisher, A. &, Griswold, L. A., 2014. Performance Skills. I: B.Schell red.2014 Occupational Therapy. Willard &Spackman’s occupational therapy. -12th ed., p.249-264Cook A.M., Polgar J.M. (2015) Assistive Technologies...

  14. American Samoa Initial Technical Assessment Report

    Energy Technology Data Exchange (ETDEWEB)

    Busche, S.; Conrad, M.; Funk, K.; Kandt, A.; McNutt, P.

    2011-09-01

    This document is an initial energy assessment for American Samoa, the first of many steps in developing a comprehensive energy strategy. On March 1, 2010, Assistant Secretary of the Interior Tony Babauta invited governors and their staff from the Interior Insular Areas to meet with senior principals at the National Renewable Energy Laboratory (NREL). Meeting discussions focused on ways to improve energy efficiency and increase the deployment of renewable energy technologies in the U.S. Pacific Territories. In attendance were Governors Felix Camacho (Guam), Benigno Fitial (Commonwealth of the Northern Mariana Islands), and Togiola Tulafono, (American Samoa). This meeting brought together major stakeholders to learn and understand the importance of developing a comprehensive strategic plan for implementing energy efficiency measures and renewable energy technologies. For several decades, dependence on fossil fuels and the burden of high oil prices have been a major concern but never more at the forefront as today. With unstable oil prices, the volatility of fuel supply and the economic instability in American Samoa, energy issues are a high priority. In short, energy security is critical to American Samoa's future economic development and sustainability. Under an interagency agreement, funded by the Department of Interior's Office of Insular Affairs, NREL was tasked to deliver technical assistance to the islands of American Samoa. Technical assistance included conducting an initial technical assessment to define energy consumption and production data, establish an energy consumption baseline, and assist with the development of a strategic plan. The assessment and strategic plan will be used to assist with the transition to a cleaner energy economy. NREL provided an interdisciplinary team to cover each relevant technical area for the initial energy assessments. Experts in the following disciplines traveled to American Samoa for on-island site assessments: (1

  15. 20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

    Science.gov (United States)

    2010-04-01

    ... capacity building and technical assistance efforts aimed at improving the competencies of the personnel who... developed with funds under this section are made available to be shared with other States, SDA's and the... contributing to the National Network. (2) All shared costs shall be allocated among the contributing funding...

  16. Recent trends in assistive technology for mobility

    OpenAIRE

    Cowan, RE; Fregly, BJ; Boninger, ML; Chan, L; Rodgers, MM; Reinkensmeyer, DJ

    2012-01-01

    Loss of physical mobility makes maximal participation in desired activities more difficult and in the worst case fully prevents participation. This paper surveys recent work in assistive technology to improve mobility for persons with a disability, drawing on examples observ ed during a tour of academic and industrial research sites in Europe. The underlying theme of this recent work is a more seamless integration of the capabilities of the user and the assistive technology. This improved int...

  17. Use of assistive technologies in academic libraries: a survey.

    Science.gov (United States)

    Tripathi, Manorama; Shukla, Archana

    2014-01-01

    The present article attempts to highlight the use of assistive technologies in academic libraries in India, the United Kingdom, the United States, and Canada. It dwells upon the use and importance of assistive technologies in general and their use for visually challenged learners in particular. Further, it gives suggestions for implementing assistive technologies in academic libraries for making visually challenged students self-reliant learners in accomplishing their academic and research pursuits. The present study adopted convenience sampling for collecting the data, which was collected between December 15, 2012 and January 18, 2013.

  18. CLOUD TECHNOLOGIES IN MANAGEMENT AND EDUCATIONAL PROCESS OF UKRAINIAN TECHNICAL UNIVERSITIES

    Directory of Open Access Journals (Sweden)

    Yu. Tryus

    2014-06-01

    Full Text Available This study analyzes opportunities for using cloud technologies in higher education in Ukraine. On the basis of principles of the system approach, it examines the main task of cloud technologies, strategic and tactical goals of cloud computing at the technical universities, as well as problems that arise in their implementation in the educational process. The paper discusses the main trends in the use of cloud technologies in higher technical education, analyzes cloud services used by leading technical universities in Ukraine in management and learning. The typical structure of a Technical University is considered with public, private, and hybrid clouds. The experience of Cherkasy State Technological University in the use of cloud technologies at management and learning is presented. Considerations are particularly given to distance support, mobile, and blending learning, virtualization mechanism to support the students learning at natural, mathematical sciences and engineering through the utilization of individual desktops.

  19. American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance U.S. Army – Project 214 Analysis of Regulations Associated with Implementation of a Rocky Mountain Secure Smart-Grid

    Energy Technology Data Exchange (ETDEWEB)

    Warwick, William M.

    2010-09-30

    This document describes technical assistance provided by PNNL to further develop a smart grid technologies concept to provide a basis for policies and plans for the US Army. The effort was to analyze the potential to utilize emerging smart grid technologies along with indigenous renewable and other resources to meet the emergency and other power needs of Department of Defense facilities in Colorado and Wyoming.

  20. Society for Assisted Reproductive Technology and assisted reproductive technology in the United States: a 2016 update.

    Science.gov (United States)

    Toner, James P; Coddington, Charles C; Doody, Kevin; Van Voorhis, Brad; Seifer, David B; Ball, G David; Luke, Barbara; Wantman, Ethan

    2016-09-01

    The Society for Assisted Reproductive Technology (SART) was established within a few years of assisted reproductive technology (ART) in the United States, and has not only reported on the evolution of infertility care, but also guided it toward improved success and safety. Moving beyond its initial role as a registry, SART has expanded its role to include quality assurance, data validation, practice and advertising guidelines, research, patient education and advocacy, and membership support. The success of ART in this country has greatly benefited from SART's role, as highlighted by a series of graphs. SART continues to set the standard and lead the way. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  1. Epigenetics and assisted reproductive technologies

    DEFF Research Database (Denmark)

    Pinborg, Anja; Loft, Anne; Romundstad, Liv Bente

    2016-01-01

    Epigenetic modification controls gene activity without changes in the DNA sequence. The genome undergoes several phases of epigenetic programming during gametogenesis and early embryo development coinciding with assisted reproductive technologies (ART) treatments. Imprinting disorders have been...

  2. Technical assistance and seasonality in the diet and production of dairy herds in household agriculture of Western Paraná

    Directory of Open Access Journals (Sweden)

    Rodrigo Cesar dos Reis Tinini

    2015-02-01

    Full Text Available The objective of the present study was to characterize the food sources, as well as the composition and quality of milk obtained from household farms of western Paraná State (Brazil with and without technical assistance during the different seasons. For such, 24 properties were selected, 12 of which only received assistance and technical support. Four milk samples were taken (summer, autumn, winter and spring to assess the physicochemical composition, somatic cell count and total bacterial count and feed supplied to the animals to assess the chemical composition (crude protein, ash, dry matter and neutral detergent fiber. The data were analyzed in a completely randomized design with a 2 × 4 factorial arrangement; the first factor was the presence and absence of technical assistance and the second factor was the four seasons of the year. Due to the dairy tradition of properties in the region, technical assistance had no significant effects on the health and nutritional quality of food, the number of animals, the production, or total bacterial count, which suffered oscillations only depending on the seasons of the year. However, the presence of assistance contributed to reducing somatic cell counts of milk produced and marketed. The technical assistance does not affect the quality of forages and concentrates used or the milk composition; however, it improves the sanitary quality of the milk produced throughout the four seasons of the year in household farms of western Paraná.

  3. Socio-Technical Considerations for the Use of Blockchain Technology in Healthcare.

    Science.gov (United States)

    Wong, Ming Chao; Yee, Kwang Chien; Nøhr, Christian

    2018-01-01

    Blockchain technology is often considered as the fourth industrial revolution that will change the world. The enthusiasm of the transformative nature of blockchain technology has infiltrated healthcare. Blockchain is often seen as the much needed and perfect technology for healthcare, addressing the difficult and complex issues of security and inter-operability. More importantly, the "value" and trust-based system can deliver automated action and response via its smart contract mechanism. Healthcare, however, is a complex system. Health information technology (HIT) so far, has not delivered its promise of transforming healthcare due to its complex socio-technical and context sensitive interaction. The introduction of blockchain technology will need to consider a whole range of socio-technical issues in order to improve the quality and safety of patient care. This paper presents a discussion on these socio-technical issues. More importantly, this paper argues that in order to achieve the best outcome from blockchain technology, there is a need to consider a clinical transformation from "information" to "value " and trust. This paper argues that urgent research is needed to address these socio-technical issues in order to facilitate best outcomes for blockchain in healthcare. These socio-technical issues must then be further evaluated by means of working prototypes in the medical domain in coming years.

  4. Reducing multiple births in assisted reproduction technology.

    Science.gov (United States)

    Bhattacharya, Siladitya; Kamath, Mohan S

    2014-02-01

    Multiple pregnancy, a complication of assisted reproduction technology, is associated with poorer maternal and perinatal outcomes. The primary reason behind this is the strategy of replacing more than one embryo during an assisted reproduction technology cycle to maximise pregnancy rates. The solution to this problem is to reduce the number of embryos transferred during in-vitro fertilisation. The transition from triple- to double-embryo transfer, which decreased the risk of triplets without compromising pregnancy rates, was easily implemented. The adoption of a single embryo transfer policy has been slow because of concerns about impaired pregnancy rates in a fresh assisted reproduction technology cycle. Widespread availability of effective cryopreservation programmes means that elective single embryo transfer, along with subsequent frozen embryo transfers, could provide a way forward. Any such strategy will need to consider couples' preferences and existing funding policies, both of which have a profound influence on decision making around embryo transfer. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Technical Education--The Key to Sustainable Technological Development

    Science.gov (United States)

    Odo, J. U.; Okafor, W. C.; Odo, A. L.; Ejikeugwu, L. N.; Ugwuoke, C. N.

    2017-01-01

    Technical education has been identified as one of the most effective human resource development that needs to be embraced for rapid industrialization and sustainable technological development of any nation. Technical education has been an integral part of national development in many societies because of its impact on productivity and economic…

  6. Middle school special education teachers' perceptions and use of assistive technology in literacy instruction.

    Science.gov (United States)

    Flanagan, Sara; Bouck, Emily C; Richardson, Jennifer

    2013-01-01

    In this research the authors examined middle school special education teachers' perceptions of assistive technology during literacy instruction with students with high incidence disabilities. A survey explored the use, effectiveness, and factors impacting use or effectiveness of assistive technology for literacy teaching and learning. Results suggested teachers' perceived assistive technology to be an effective tool for literacy, but use it minimally. When assistive technology was used, teachers indicated it was an effective literacy support. Teachers also reported barriers to using assistive technology in literacy including cost, usability, and lack of training/experience. However, factors such as previous successful experiences with assistive technology and assistive technology supporting students' learning encouraged assistive technology use. The consistency of teachers' reports of needing more experience and knowledge in assistive technology to fully use it suggests implications for preservice preparation such as providing additional experiences and information on assistive technology.

  7. VIRTUALIZATION TECHNICAL THINKING WITHIN THE INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Robert Lis

    2014-11-01

    Full Text Available The article presents the possibilities of virtualization technical thinking within the information technology. This question expresses the need for virtualization of existing information systems to improve the conduct of business by the company. In resulting virtualization of the technical-computer thought on against existing needs of the functioning of 16-bit systems in 64-bit systems. Enables cost-effective use of excess capacity existing computing resources.

  8. Has Technology Been Considered? A Guide for IEP Teams. CASE/TAM Assistive Technology Policy and Practice Series.

    Science.gov (United States)

    Chambers, A. C.

    This guide compiles information essential to a working knowledge of assistive technology for children with disabilities. It addresses the definition of assistive technology and provides information on laws which direct the provision of assistive technology. The manual provides a framework to guide the Individualized Education Program (IEP) team as…

  9. Subsurface Contaminants Focus Area (SCFA) Lead Laboratory Providing Technical Assistance to the DOE Weapons Complex in Subsurface Contamination

    International Nuclear Information System (INIS)

    Wright, J. A. Jr.; Corey, J. C.

    2002-01-01

    The Subsurface Contaminants Focus Area (SCFA), a DOE-HQ EM-50 organization, is hosted and managed at the Savannah River Site in Aiken, South Carolina. SCFA is an integrated program chartered to find technology and scientific solutions to address DOE subsurface environmental restoration problems throughout the DOE Weapons Complex. Since its inception in 1989, the SCFA program has resulted in a total of 269 deployments of 83 innovative technologies. Until recently, the primary thrust of the program has been to develop, demonstrate, and deploy those remediation technology alternatives that are solutions to technology needs identified by the DOE Sites. Over the last several years, the DOE Sites began to express a need not only for innovative technologies, but also for technical assistance. In response to this need, DOE-HQ EM-50, in collaboration with and in support of a Strategic Lab Council recommendation directed each of its Focus Areas to implement a Lead Laboratory Concept to enhance their technical capabilities. Because each Focus Area is unique as defined by the contrast in either the type of contaminants involved or the environments in which they are found, the Focus Areas were given latitude in how they set up and implemented the Lead Lab Concept. The configuration of choice for the SCFA was a Lead-Partner Lab arrangement. Savannah River Technology Center (SRTC) teamed with the SCFA as the Focus Area's Lead Laboratory. SRTC then partnered with the DOE National Laboratories to create a virtual consulting function within DOE. The National Laboratories were established to help solve the Nation's most difficult problems, drawing from a resource pool of the most talented and gifted scientists and engineers. Following that logic, SRTC, through the Lead-Partner Lab arrangement, has that same resource base to draw from to provide assistance to any SCFA DOE customer throughout the Complex. This paper briefly describes how this particular arrangement is organized and

  10. Inclusive Design for Assistive Technology

    DEFF Research Database (Denmark)

    Herriott, Richard

    2014-01-01

    Objectives/focus/background: Design for Assistive Technology (AT) requires a special focus on user-requirements during product development. Inclusive Design theory and methodology thus has been relevant to AT design processes. Research in AT design has both drawn from and added to the ID knowledge...... the question of whether AT design processes fit neatly into a model created for a different context . Semi-structured interviews were carried out with eight/nine designers of assistive technology. This provided raw data concerning the processes used by the designers in a range of products including...... a wheelchair for children, a washbasin system, a rollator and breathing apparatus for patients with chronic obstructive pulmonary disorder. The interviews conducted showed that there was required a different emphasis in the means by which users´ requirements were incorporated into the design process...

  11. Technical and economic assessment of energy conversion technologies for MSW

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, W.R.

    2002-07-01

    Thermal processes for municipal solid wastes (MSW) based on pyrolysis and/or gasification that have relevance to the emerging UK market are described in this report, and the results of the technical and economical assessment of these processes are presented. The Mitsui R21 Technology, the Thermoselect Process, the Nippon Steel Waste Melting Process, the Pyropleq Process, and the Compact Power Process are selected for detailed comparison on the basis of the overall technical concept, the energy balance and the requirements for consumables, environmental performance, and the technical and commercial status of the technology. Details are also given of a comparison of the novel thermal technologies with conventional mass burn incineration for MSW.

  12. Technical and economic assessment of energy conversion technologies for MSW

    International Nuclear Information System (INIS)

    Livingston, W.R.

    2002-01-01

    Thermal processes for municipal solid wastes (MSW) based on pyrolysis and/or gasification that have relevance to the emerging UK market are described in this report, and the results of the technical and economical assessment of these processes are presented. The Mitsui R21 Technology, the Thermoselect Process, the Nippon Steel Waste Melting Process, the Pyropleq Process, and the Compact Power Process are selected for detailed comparison on the basis of the overall technical concept, the energy balance and the requirements for consumables, environmental performance, and the technical and commercial status of the technology. Details are also given of a comparison of the novel thermal technologies with conventional mass burn incineration for MSW

  13. Systems thinking for assistive technology: a commentary on the GREAT summit.

    Science.gov (United States)

    MacLachlan, Malcolm; Scherer, Marcia

    2018-05-17

    The area of assistive technology has a long history of technological ingenuity and innovation. In order to ensure that the benefits of assistive technology are equitably distributed across the population and life course, it is necessary to adopt a systemic approach to the area. We describe examples of systems thinking and non-systems thinking across 10 Ps. These Ps are People (or users, as the primary beneficiaries of assistive technology), Policy, Products, Personnel, Provision (as key strategic drivers at systems level); and Procurement, Place, Pace, Promotion and Partnership (as key situational factors for systems). Together these Ps should constitute a framework for an "open" system that can evolve and adapt, that empowers users, inter-connects key components and locates these in the reality of differing contexts. The adoption of a stronger systems thinking perspective within the assistive technology field should allow for more equitable, more resilient and more sustainable assistive technology across high, middle- and low-income contexts and countries. Implications for Rehabilitation The progress of assistive technology provison has been hampered by disconnected initiatives and activities and this needs to be corrected. Systems thinking is a way of thinking about the connections between things and how these are influenced by contextual and other factors. By encouraging the providers and users of assitive technology to think more systemically we can provide a more cohesive and resilient systems. The user experience is the central component of systems thinking in assistive technologies.

  14. Thirty-five years of assisted reproductive technologies in Israel

    Directory of Open Access Journals (Sweden)

    Daphna Birenbaum-Carmeli

    2016-06-01

    Full Text Available Israel is known as a pronatalist country. Whether due to the Biblical commandment to ‘be fruitful and multiply’ or the traumas of the Holocaust and perennial wars, reproduction is a central life goal for most Israelis. Israeli women bear substantially more children than their counterparts in industrialized countries and view child-rearing as a key life accomplishment. These personal world-view and real-life individual quests take place in a context of equally pronatalist state policies and religious openness to assisted reproductive technologies. In this paper, I outline 35 years of assisted reproductive technologies in Israel by tracing a principal axis in the development of three major technologies of assisted reproduction: the proliferation of IVF-ICSI; the globalization of gamete donation; and the privatization of surrogacy. The paper is based on a policy analysis as well as various studies of assisted reproductive technologies, conducted in Israel over this period.

  15. Optimizing equine assisted reproductive technologies

    NARCIS (Netherlands)

    Onstein, W.K.

    2018-01-01

    Application of assisted reproductive technologies (ARTs) is more common in the horse breeding industries, but there is still room for improvement. Embryo recovery rate after embryo flushing, embryo production rate after ovum pick-up (OPU) and intracytoplasmic sperm injection (ICSI), cryopreservation

  16. Perspectives of Introduction of the Mobile-Assisted Language Learning (MALL) Technology

    Science.gov (United States)

    Wagner, Monica-Nataliia Laurensovna; Donskaya, Maryana Vladimirovna; Kupriyanova, Milana Evgenievna; Ovezova, Umeda Akparovna

    2016-01-01

    Present article addresses methodological and technical (instrumental) aspects of creation and implementation of mobile-assisted learning, which is oriented to the process of foreign languages learning. We provide the interpretation of the main definitions of mobile-assisted learning, as well as propose recommendations for using mobile devices in…

  17. NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

    Science.gov (United States)

    ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

    2005-01-01

    The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

  18. Using assistive technology services at differing levels of care: healthy older couples' perceptions.

    Science.gov (United States)

    Harrefors, Christina; Axelsson, Karin; Sävenstedt, Stefan

    2010-07-01

    The aim of the study was to describe healthy older couples' perceptions of using assistive technology services when needing assistance with care. The use of information technology-based assistive technology services in elder care has increased as a result of an increase of care performed in private homes. The use of assistive technology services in care of older people at home has been evaluated as something positive by patients, relatives and nursing staff, while as resistance to their increased use has also been noted. Twelve healthy couples, aged over 70 years, from northern Sweden were interviewed in 2005 about their perceptions of using assistive technology services in the case of being in need of assistance with personal care. Open, individual semi-structured interviews supported by written vignettes describing three levels of caring needs were used and the data analysed with content analysis. The findings were interpreted as one main theme with three categories: Asset or threat depends on caring needs and abilities. Three categories were identified within the theme: Assistive technology services provide an opportunity; The consequences of using assistive technology services are hard to anticipate; and Fear of assistive technology services when completely dependent on care. Trust and security in the care of older people who are severely ill, dependent on care and living at home should be a hallmark in using assistive technology services. Human presence is an important dimension and must be considered when developing concepts for use of assistive technology services.

  19. The technical support organization at BNL is twenty years old

    International Nuclear Information System (INIS)

    Indusi, J.P.

    1988-01-01

    The Technical Support Organization was established by the Atomic Energy Commission in January 1968 at Brookhaven National Laboratory (BNL). The original idea came from a small group of scientists at BNL. The group included Willy Higinbotham, Herb Kouts, Frank Miles, Richard Dodson, and Gerhardt Friedlander. The AEC endorsed the idea of a technical support group to provide technical assistance to AEC's Office of Safeguards and Materials Management and they sent requests for expressions of interest throughout the complex. For a number of reasons, to be discussed in the paper, the Technical Support Organization was established at BNL. An early project was the Conceptual Design for Safeguarding Nuclear Material which formed the first logical and systematic description of the integration of several elements into a safeguards system for protecting nuclear materials. Many other projects were undertaken over the years. TSO today provides technical assistance to the DOE Office of Safeguards and Secuirty, the Office of Classification and Technology Policy, and the Office of Security Evaluations. Technical support to the IAEA is provided under the Program of Technical Assistance to Agency Safeguards (POTAS). Recently, TSO began a program of technical assistance to the Air Force Weapons Laboratory in the area of nuclear systems security

  20. PROMOTING EQUALITY THROUGH ASSISTIVE TECHNOLOGIES, A SOCIOECONOMIC PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Ana-Maria NEAGU

    2015-04-01

    Full Text Available The aim of the proposed paper is to identify a possible cost benefit evaluation of assistive technologies in the context of promoting equal opportunities in life. Equal opportunities represent more than just ensuring an equitable framework for all individuals; equality represents recognition and respect for all individuals no matter the differences among us. The paper debates the issues of equality in the context of assistive technologies advance. The use of assistive technology was found to be predictive of enjoyment of human rights and increased capabilities for those with special needs. Because promoting equality among individuals necessitates more than doing nothing it is obvious that we should think of evaluating the costs and the benefits of such actions taking into consideration socio and economic aspects. The topic has a novelty and an applicability character mostly for our country.

  1. Development and Technical Validation of the Mobile Based Assistive Listening System: A Smartphone-Based Remote Microphone.

    Science.gov (United States)

    Lopez, Esteban Alejandro; Costa, Orozimbo Alves; Ferrari, Deborah Viviane

    2016-10-01

    The purpose of this research note is to describe the development and technical validation of the Mobile Based Assistive Listening System (MoBALS), a free-of-charge smartphone-based remote microphone application. MoBALS Version 1.0 was developed for Android (Version 2.1 or higher) and was coded with Java using Eclipse Indigo with the Android Software Development Kit. A Wi-Fi router with background traffic and 2 affordable smartphones were used for debugging and technical validation comprising, among other things, multicasting capability, data packet loss, and battery consumption. MoBALS requires at least 2 smartphones connected to the same Wi-Fi router for signal transmission and reception. Subscriber identity module cards or Internet connections are not needed. MoBALS can be used alone or connected to a hearing aid or cochlear implant via direct audio input. Maximum data packet loss was 99.28%, and minimum battery life was 5 hr. Other relevant design specifications and their implementation are described. MoBALS performed as a remote microphone with enhanced accessibility features and avoids overhead expenses by using already-available and affordable technology. The further development and technical revalidation of MoBALS will be followed by clinical evaluation with persons with hearing impairment.

  2. Training for Technical Assistants: Technical Assistance Program

    Science.gov (United States)

    1986-09-01

    shortage of technical ptfesson until such time as English , "speking instructors might be trained, There. would be An aumcation of committed on-calI...12 hours in classroom Instruction, students in English as a Second nel Research and Development Computer.taught students Language. The program Is...hbeels "p.-ogram. A Iot ’ atar boiler arn tank heats týe food enroute to its destination. 1.0. A new tor of dust ptectleon to protect machine .perators

  3. Exploring assistive technology and post-school outcomes for students with severe disabilities.

    Science.gov (United States)

    Bouck, Emily C; Flanagan, Sara M

    2016-11-01

    This study sought to understand the extent to which students with severe disabilities receive assistive technology in school and out-of-school, and the relationship between receipt of assistive technology in school and post-school outcomes for these students. This study was a secondary analysis of the National Longitudinal Transition Study-2 (NLTS2) from the USA. To analyze the data in this correlational study, researchers conducted frequency distributions, Chi Square Tests of Associations, significance tests and logistic regressions. The main results suggest (a) receipt of assistive technology in school varied greatly by disability identification; (b) receipt of assistive technology post-school also varied by disability identification, but receipt was generally lower; and (c) few statistically significant post-school outcome differences existed between students who received assistive technology and those who did not. An under-utilization of assistive technology exists in practice in the USA for students with severe disabilities. Implications for Rehabilitation An under-utilization of assistive technology for secondary students and adults with severe disabilities likely exists. A need exists for improved collaboration between professionals in rehabilitation and professionals in schools to ensure continuation of needed services or aids, such as assistive technology. Additional research is needed to better understand the adult life (or post-school) outcomes of individuals with severe disabilities, factors from PK-12 schooling or post-school services that positively and negative impact those outcomes.

  4. 15 CFR 1160.3 - Assistance to industrial technology partnerships.

    Science.gov (United States)

    2010-01-01

    ... Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Promotion of Private Sector Industrial Technology Partnerships § 1160.3 Assistance to industrial...

  5. Methodological approach to participatory formulation of agricultural technical assistance plans with territorial approach

    Directory of Open Access Journals (Sweden)

    Holmes Rodríguez Espinosa

    2015-10-01

    Full Text Available The collective identification of needs and shared decision-making in projects’ formulation for agricultural development is a process that requires the identification of participatory methodologies to promote active and reflective engagement of producers. The aim of this study was to evaluate a methodological approach for participatory formulation of technical assistance plan with territorial approach. Matrix analysis for the identification and prioritization of the most limiting technical assistance factors for milk production was performed and alternative solutions were defined, through participatory workshops with farmers. The results show the advantages of a collective reflection with stakeholders and quantitative tools reducing subjectivity in decision-making, improving participation in their own development and identifying acceptable alternatives to farmers and viable to the municipality in order to improve lack of pasture and forage management, implementation of good agricultural practices GAP and rational use of agrochemicals.

  6. A Review of Technology-Assisted Interventions for Diabetes Prevention.

    Science.gov (United States)

    Grock, Shira; Ku, Jeong-Hee; Kim, Julie; Moin, Tannaz

    2017-09-23

    The high prevalence of prediabetes and success of the diabetes prevention program (DPP) has led to increasing efforts to provide readily accessible, cost-effective DPP interventions to the general public. Technology-assisted DPP interventions are of particular interest since they may be easier to widely distribute and sustain as compared to traditional in-person DPP. The purpose of this article is to provide an overview of currently available technology-assisted DPP interventions. This review focuses on studies that have examined the use of mobile phone text messaging, smartphone/web-based apps, and telehealth programs to help prevent or delay the onset of incident type 2 diabetes. While there is variability in the results of studies focused on technology-assisted DPP and weight loss interventions, there is evidence to suggest that these programs have been associated with clinically meaningful weight loss and can be cost-effective. Patients who are at risk for diabetes can be offered technology-assisted DPP and weight loss interventions to lower their risk of incident diabetes. Further research should determine what specific combination of intervention features would be most successful.

  7. Bots mind the social-technical gap

    NARCIS (Netherlands)

    Lee, M.; Frank, L.E.; Beute, F.; de Kort, Y.A.W.; IJsselsteijn, W.A.

    2017-01-01

    Mobile workers experience the social-technical gap when moral dilemmas occur on communication platforms, and technology cannot adapt to social contexts on ethical matters. On messaging applications, bots are non-human team members and/or assistants that can aid mobile workers manage ethical

  8. 76 FR 35864 - Proposed Priority; Special Demonstration Programs-National Technical Assistance Projects To...

    Science.gov (United States)

    2011-06-20

    ... have national significance and improve the performance of State vocational rehabilitation (VR) agencies... Centers, the American Indian Vocational Rehabilitation Technical Assistance Center, and the Independent... of each priority as absolute, competitive preference, or invitational through a notice in the Federal...

  9. Assistive Technology for Persons with Physical Disabilities: Evaluation and Outcomes

    NARCIS (Netherlands)

    Rigby, P.J.

    2009-01-01

    This thesis presents a compilation of published studies that evaluated assistive technology interventions for children and adults with physical disabilities. The first chapter introduces the need for and the challenges involved in studying the outcomes of assistive technology interventions. The

  10. UMTRA technical assistance contractor quality assurance program plan

    International Nuclear Information System (INIS)

    1994-10-01

    This Quality Assurance Program Plan (QAPP) provides the primary requirements for the integration of quality functions into all Technical Assistance Contractor (TAC) Project organization activities. The QAPP is the written directive authorized by the TAc Program Manager to accomplish this task and to implement procedures that provide the controls and sound management practices needed to ensure TAC contractual obligations are met. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization functions are executed in a manner that will protect public health and safety, promote the success of the Project, and meet or exceed contract requirements

  11. Investigating the effectiveness of technologies applied to assist seniors: A systematic literature review.

    Science.gov (United States)

    Khosravi, Pouria; Ghapanchi, Amir Hossein

    2016-01-01

    Recently, a number of Information and Communication Technologies have emerged with the aim to provide innovative and efficient ways to help seniors in their daily life and to reduce the cost of healthcare. Studies have been conducted to introduce an assistive technology to support seniors and to investigate the acceptance of these assistive technologies; however, research illustrating the effectiveness of assistive technologies is scant. This study undertakes a systematic literature review of ScienceDirect, PubMed, ProQuest and IEEE Explore databases to investigate current empirical studies on the assistive technologies applied in aged care. Our systematic review of an initial set of 2035 studies published from 2000 to 2014 examines the role of assistive technologies in seniors' daily lives, from enhancements in their mobility to improvements in the social connectedness and decreases in readmission to hospitals. This study found eight key issues in aged care that have been targeted by researchers from different disciplines (e.g., ICT, health and social science), namely, dependent living, fall risk, chronic disease, dementia, social isolation, depression, poor well-being, and poor medication management. This paper also identified the assistive technologies that have been proposed to overcome those problems, and we categorised these assistive technologies into six clusters, namely, general ICT, robotics, telemedicine, sensor technology, medication management applications, and video games. In addition, we analyzed the effectiveness of the identified technologies and noted that some technologies can change and enhance seniors' daily lives and relieve their problems. Our analysis showed a significant growth in the number of publications in this area in the past few years. It also showed that most of the studies in this area have been conducted in North America. Assistive technologies are a reality and can be applied to improve quality of life, especially among older age

  12. Training and technical assistance for compliance with beverage and physical activity components of New York City's regulations for early child care centers.

    Science.gov (United States)

    Kakietek, Jakub; Dunn, Lillian; O'Dell, Sarah Abood; Jernigan, Jan; Kettel Khan, Laura

    2014-10-16

    In 2006, the New York City Department of Health and Mental Hygiene (DOHMH) passed regulations for child care centers that established standards for beverages provided to children and set a minimum amount of time for daily physical activity. DOHMH offered several types of training and technical assistance to support compliance with the regulations. This article analyzes the association between training and technical assistance provided and compliance with the regulations in a sample of 174 group child care centers. Compliance was measured by using a site inventory of beverages stored on premises and a survey of centers' teachers regarding the amount of physical activity provided. Training and technical assistance measures were based on the DOHMH records of training and technical assistance provided to the centers in the sample and on a survey of center directors. Ordinal logistic regression was used to assess the association between training and technical assistance measures and compliance with the regulations. Measures of training related to physical activity the center received: the number of staff members who participated in Sport, Play and Active Recreation for Kids (SPARK) and other training programs in which a center participated were associated with better compliance with the physical activity regulations. Neither training nor technical assistance were associated with compliance with the regulations related to beverages. Increased compliance with regulations pertaining to physical activity was not related to compliance with beverage regulations. Future trainings should be targeted to the specific regulation requirements to increase compliance.

  13. Final priority; Rehabilitation Services Administration--Assistive Technology Alternative Financing Program. Final priority.

    Science.gov (United States)

    2014-08-14

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Assistive Technology Alternative Financing Program administered by the Rehabilitation Services Administration (RSA). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. This priority is designed to ensure that the Department funds high-quality assistive technology (AT) alternative financing programs (AFPs) that meet rigorous standards in order to enable individuals with disabilities to access and acquire assistive technology devices and services necessary to achieve education, community living, and employment goals.

  14. Application of failure mode and effect analysis in an assisted reproduction technology laboratory.

    Science.gov (United States)

    Intra, Giulia; Alteri, Alessandra; Corti, Laura; Rabellotti, Elisa; Papaleo, Enrico; Restelli, Liliana; Biondo, Stefania; Garancini, Maria Paola; Candiani, Massimo; Viganò, Paola

    2016-08-01

    Assisted reproduction technology laboratories have a very high degree of complexity. Mismatches of gametes or embryos can occur, with catastrophic consequences for patients. To minimize the risk of error, a multi-institutional working group applied failure mode and effects analysis (FMEA) to each critical activity/step as a method of risk assessment. This analysis led to the identification of the potential failure modes, together with their causes and effects, using the risk priority number (RPN) scoring system. In total, 11 individual steps and 68 different potential failure modes were identified. The highest ranked failure modes, with an RPN score of 25, encompassed 17 failures and pertained to "patient mismatch" and "biological sample mismatch". The maximum reduction in risk, with RPN reduced from 25 to 5, was mostly related to the introduction of witnessing. The critical failure modes in sample processing were improved by 50% in the RPN by focusing on staff training. Three indicators of FMEA success, based on technical skill, competence and traceability, have been evaluated after FMEA implementation. Witnessing by a second human operator should be introduced in the laboratory to avoid sample mix-ups. These findings confirm that FMEA can effectively reduce errors in assisted reproduction technology laboratories. Copyright © 2016 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

  15. Chemical Technology Division annual technical report 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division`s activities during 1997 are presented.

  16. 1998 Chemical Technology Division Annual Technical Report.

    Energy Technology Data Exchange (ETDEWEB)

    Ackerman, J.P.; Einziger, R.E.; Gay, E.C.; Green, D.W.; Miller, J.F.

    1999-08-06

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented.

  17. Chemical Technology Division annual technical report 1997

    International Nuclear Information System (INIS)

    1998-06-01

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1997 are presented

  18. IAEA Safeguards and technical support programs: POTAS in the 1990s

    International Nuclear Information System (INIS)

    Kessler, C.J.

    1991-01-01

    The US Program of Technical Assistance to IAEA Safeguards (POTAS) has since 1978 provided technology and technical assistance to the IAEA to support its nuclear safeguards activities. The present level of support, $6.9 million per year, equals 10% of the Department of Safeguards annual budget. During the next decade, the International Atomic Energy Agency (IAEA) will face new technical challenges in carrying out its verification activities. To help the IAEA acquire the technology and other technical support that it will require in the 1990s, POTAS expects to continue its assistance, both in the areas established in the past and in additional areas dictated by newly identified IAEA safeguards requirements. This paper will look at the political and policy context within which the Department of Safeguards, and hence POTAS, operates, and how that context is expected to evolve over the next decade. The roles and functions of POTAS will be identified and discussed in terms of their historical evolution. Lastly, the paper will consider how POTAS is expected to change during the 1990s, both to maintain effectiveness in existing roles and functions, and to meet the challenge of the changing policy context. 5 refs

  19. Applied Welding Technology. Technical Committee Report.

    Science.gov (United States)

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in applied welding technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are…

  20. Drafting & Design Technology. Technical Committee Report.

    Science.gov (United States)

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in drafting and design technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…

  1. Designing Assistive Technologies for the ADHD Domain

    DEFF Research Database (Denmark)

    Sonne, Tobias; Grønbæk, Kaj

    (ADHD). In this paper, we identify a set of challenges that children with ADHD typically experience, which provides an empirical foundation for pervasive health researchers to address the ADHD domain. The work is grounded in extensive empirical studies and it is contextualized using literature on ADHD....... Based on these studies, we also present lessons learned that are relevant to consider when designing assistive technology to support children with ADHD. Finally, we provide an example (CASTT) of our own work to illustrate how the presented findings can frame research activities and be used to develop...... novel assistive technology to empower children with ADHD and improve their wellbeing....

  2. Sound-based assistive technology support to hearing, speaking and seeing

    CERN Document Server

    Ifukube, Tohru

    2017-01-01

    This book "Sound-based Assistive Technology" explains a technology to help speech-, hearing- and sight-impaired people. They might benefit in some way from an enhancement in their ability to recognize and produce speech or to detect sounds in their surroundings. Additionally, it is considered how sound-based assistive technology might be applied to the areas of speech recognition, speech synthesis, environmental recognition, virtual reality and robots. It is the primary focus of this book to provide an understanding of both the methodology and basic concepts of assistive technology rather than listing the variety of assistive devices developed in Japan or other countries. Although this book presents a number of different topics, they are sufficiently independent from one another that the reader may begin at any chapter without experiencing confusion. It should be acknowledged that much of the research quoted in this book was conducted in the author's laboratories both at Hokkaido University and the University...

  3. Assisted reproductive technology in Europe, 2009

    DEFF Research Database (Denmark)

    Ferraretti, A P; Goossens, V; Kupka, M

    2013-01-01

    The 13th European in vitro fertilization (IVF)-monitoring (EIM) report presents the results of treatments involving assisted reproductive technology (ART) initiated in Europe during 2009: are there any changes in the trends compared with previous years?...

  4. Organizational Structures and Processes to Support and Sustain Effective Technical Assistance in a State-Wide Multi-Tiered System of Support Initiative

    Science.gov (United States)

    Morrison, Julie Q.; Russell, Christine; Dyer, Stephanie; Metcalf, Terri; Rahschulte, Rebecca L.

    2014-01-01

    Despite the national proliferation of technical assistance as a driver for school reform and as a model for embedded and sustained professional development, very little is known about the organizational structures and processes needed to support technical assistance. The purpose of this paper is to describe a structured needs assessment process…

  5. Trust in technology a socio-technical perspective

    CERN Document Server

    Clarke, Karen; Rouncefield, Mark

    2006-01-01

    Encapsulates work done in the DIRC project (Interdisciplinary Research Collaboration in Dependability), bringing together a range of disciplinary approaches - computer science, sociology and software engineering - to produce a socio-technical systems perspective on the issues surrounding trust in technology in complex settings.

  6. Assisted reproductive technology has no association with autism spectrum disorders: The Taiwan Birth Cohort Study.

    Science.gov (United States)

    Lung, For-Wey; Chiang, Tung-Liang; Lin, Shio-Jean; Lee, Meng-Chih; Shu, Bih-Ching

    2018-04-01

    The use of assisted reproduction technology has increased over the last two decades. Autism spectrum disorders and assisted reproduction technology share many risk factors. However, previous studies on the association between autism spectrum disorders and assisted reproduction technology have shown inconsistent results. The purpose of this study was to investigate the association between assisted reproduction technology and autism spectrum disorder diagnosis in a national birth cohort database. Furthermore, the results from the assisted reproduction technology and autism spectrum disorder propensity score matching exact matched datasets were compared. For this study, the 6- and 66-month Taiwan Birth Cohort Study datasets were used (N = 20,095). In all, 744 families were propensity score matching exact matched and selected as the assisted reproduction technology sample (ratio of assisted reproduction technology to controls: 1:2) and 415 families as the autism spectrum disorder sample (ratio of autism spectrum disorder to controls: 1:4). Using a national birth cohort dataset, controlling for the confounding factors of assisted reproduction technology conception and autism spectrum disorder diagnosis, both assisted reproduction technology and autism spectrum disorder propensity score matching matched datasets showed the same results of no association between assisted reproduction technology and autism spectrum disorder. Further study on the detailed information regarding the processes and methods of assisted reproduction technology may provide us with more information on the association between assisted reproduction technology and autism spectrum disorder.

  7. New Technologies to Assist Training in Hospitality Sector

    Science.gov (United States)

    Balta, Sabah

    2007-01-01

    Hospitality sector needs new technological training tools, which can assist to improve sector employees' skills and services quality. The sector might be more interactive when these technological training tools used on the job-training program. This study addresses to issue of illumination of new technologic tools that enforce training in which…

  8. STDAC: Solar Thermal Design Assistance Center annual report fiscal year 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The Solar Thermal Design Assistance Center (STDAC) at Sandia is a resource provided by the DOE Solar Thermal Program. The STDAC`s major objective is to accelerate the use of solar thermal systems by providing direct technical assistance to users in industry, government, and foreign countries; cooperating with industry to test, evaluate, and develop renewable energy systems and components; and educating public and private professionals, administrators, and decision makers. This FY94 report highlights the activities and accomplishments of the STDAC. In 1994, the STDAC continued to provide significant direct technical assistance to domestic and international organizations in industry, government, and education, Applying solar thermal technology to solve energy problems is a vital element of direct technical assistance. The STDAC provides information on the status of new, existing, and developing solar technologies; helps users screen applications; predicts the performance of components and systems; and incorporates the experience of Sandia`s solar energy personnel and facilities to provide expert guidance. The STDAC directly enhances the US solar industry`s ability to successfully bring improved systems to the marketplace. By collaborating with Sandia`s Photovoltaic Design Assistance Center and the National Renewable Energy Laboratory the STDAC is able to offer each customer complete service in applying solar thermal technology. At the National Solar Thermal Test Facility the STDAC tests and evaluates new and innovative solar thermal technologies. Evaluations are conducted in dose cooperation with manufacturers, and the results are used to improve the product and/or quantify its performance characteristics. Manufacturers, in turn, benefit from the improved design, economic performance, and operation of their solar thermal technology. The STDAC provides cost sharing and in-kind service to manufacturers in the development and improvement of solar technology.

  9. Technical assistance contractor occurrence reporting and processing system

    International Nuclear Information System (INIS)

    1996-08-01

    Members of the Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance Contractor (TAC) are responsible to notify management of TAC occurrence reporting and processing system (ORPS) classified occurrences .An ORPS occurrence is an unexpected or unplanned event on DOE property which causes bodily harm, death, damage to government property, exposure to toxic or hazardous substances above acceptable limits to workers, the environment, or general public. Examples of potential reportable occurrences include, but not limited to, site personnel exposures to airborne contaminants, incidents which could expose the general public to high levels of radiation or other contaminants, a vehicle accident resulting in property damage or personnel injuries. Listed TAC manager/staff contacts, with the assistance of TAC ORPS Program Coordinators, will determine if the occurrence is reportable under Department of Energy (DOE) Order M 232.1-2. The reportable occurrences will be classified as emergency, unusual, or off-normal. If determined to be reportable, listed TAC manager/staff will verbally report the details of the occurrence to the DOE Duty Officer within 2 hours of initial notification, and provide a written report of the event by noon the following work day

  10. Process waste assessment approach, training and technical assistance for DOE contractors

    International Nuclear Information System (INIS)

    Pemberton, S.

    1994-03-01

    The Department of Energy (DOE) and its contractors are faced with a large waste management problem as are other industries. One of the tools used in a successful waste minimization pollution prevention (WMin/P2) program is a process waste assessment (PWA). The purpose of this project was to share the Kansas City Plant's (KCP's) PWA expertise with other DOE personnel and DOE contractors. This consisted of two major activities: (1) The KCP's PWA graded approach methodology was modified with the assistance of DOE/Defense Program's laboratories, and (2) PWA training and technical assistance were provided to interested DOE personnel and DOE contractors. This report documents the FY93 efforts, lesson learned, and future plans for both PWA-related activities

  11. Ambient Assistive Technologies (AAT: socio-technology as a powerful tool for facing the inevitable sociodemographic challenges?

    Directory of Open Access Journals (Sweden)

    Plischke Herbert

    2010-06-01

    Full Text Available Abstract Due to the socio-demographic change in most developed western countries, elderly populations have been continuously increasing. Therefore, preventive and assistive systems that allow elderly people to independently live in their own homes as long as possible will become an economical if not ethical necessity. These respective technologies are being developed under the term "Ambient Assistive Technologies" (AAT. The EU-funded AAT-project Ambient Lighting Assistance for an Ageing Population (ALADIN has established the long-term goal to create an adaptive system capable of improving the residential lighting conditions of single living elderly persons also aiming at supporting the preservation of their independence. Results of an earlier survey revealed that the elderly perceived their current lighting situation as satisfactory, whereas interviewers assessed in-house lighting as too dark and risk-laden. The overall results of ALADIN showed a significant increase in well-being from the baseline final testing with the new adaptive lighting system. Positive results for wellbeing and life quality suggest that the outcome effects may be attributed to the introduction of technology as well as to social contacts arising from participating in the study. The technological guidance of the study supervisors, in particular, may have produced a strong social reactivity effect that was first observed in the famous Hawthorne experiments in the 1930s. As older adults seem to benefit both from meaningful social contacts as well as assistive technologies, the question arises how assistive technology can be socially embedded to be able to maximize positive health effects. Therefore ethical guidelines for development and use of new assistive technologies for handicapped/older persons have to be developed and should be discussed with regard to their applicability in the context of AAT.

  12. [Assisted reproductive technologies and ethics].

    Science.gov (United States)

    Belaisch-Allart, Joëlle

    2014-01-01

    Since the first birth after in vitro fertilization more than 5 million of IVF babies are born in the world. Assisted reproductive technologies captivate the public, they allow maternity without ovary (oocyte donation), without uterus (surrogate mother), paternity without spermatozoids (sperm donation), parentality without limits of age, parentality after death and homoparentality. These technologies arise a lot of ethics questions, the problem is that the answers are not the same all-round the world, laws are based on morals, beliefs, faiths, and convictions. Theses variations arise themselves questions on the value of these non-universal answers.

  13. National Rehabilitation Hospital Assistive Technology Research Center

    Science.gov (United States)

    1995-10-01

    Shoulder-Arm Orthoses Several years ago, the Rehabilitation Engineering Research Center (RERC) on Rehabilitation Robotics in Delaware1 identified a... exoskeletal applications for persons with disabilities. 2. Create a center of expertise in rehabilitation technology transfer that benefits persons with...AD COOPERATIVE AGREEMENT NUMBER: DAMD17-94-V-4036 TITLE: National Rehabilitation Hospital Assistive Technology- Research Center PRINCIPAL

  14. Using assistive technology for schoolwork: the experience of children with physical disabilities.

    Science.gov (United States)

    Murchland, Sonya; Parkyn, Helen

    2010-01-01

    This study explored the experience of children with physical disabilities using assistive technology for participation with schoolwork to gain a greater understanding of their perspectives and subjective experiences. A qualitative study involving thematic analysis of in-depth interviews of the child with a parent or significant adult. Purposeful sampling from a larger study recruited five children aged between 10 and 14 years, with differing physical disabilities who attended mainstream schools. All children used computer-based assistive technology. All of the children recognised that assistive technology enabled them to participate and reduced the impact of their physical disability, allowing independent participation, and facilitated higher learning outcomes. Issues related to ease of use, social implications and assistive technology systems are discussed.

  15. UMTRA project technical assistance contractor quality assurance implementation plan

    International Nuclear Information System (INIS)

    1994-03-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance contractor (TAC) Quality Assurance Implementation Plan (QAIP) outlines the primary requirements for integrating quality functions for TAC technical activities applied to the surface and ground water phases of the UMTRA Project. The QAIP is subordinate to the latest issue of the UMTRA Project TAC Quality Assurance Program Plan (QAPP) (DOE, 1993a), which was developed using US Department of Energy (DOE) Order 5700.6C quality assurance (QA) criteria. The QAIP addresses technical aspects of the TAC UMTRA Project surface and ground water programs. All QA issues in the QAIP shall comply with requirements contained in the TAC QAPP (DOE, 1933a). Because industry standards for data acquisition and data control are not addressed in DOE Order 5700.6C, the QAIP has been formatted to the 14 US Environmental Protection Agency (EPA) Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) QA requirements. DOE Order 5700.6C criteria that are not contained in the CERCLA requirements are added to the QAIP as additional requirements in Sections 15.0 through 18.0. Project documents that contain CERCLA requirements and 5700.6 criteria shall be referenced in this document to avoid duplication. Referenced documents are not included in this QAIP but are available through the UMTRA Project Document Control Center

  16. Assistive technologies for brain-injured gamers

    OpenAIRE

    Colman, Jason; Gnanayutham, Paul

    2013-01-01

    This chapter surveys assistive technologies which make video games more accessible for people who have an acquired brain injury (ABI). As medical care improves, an increasing number of people survive ABI. Video games have been shown to provide therapeutic benefits in many medical contexts, and rehabilitation for ABI survivors has been shown to be facilitated by playing some types of video game. Therefore, technologies which improve the accessibility of games have the potential to bring a form...

  17. Assisted Reproductive Technology: MedlinePlus Health Topic

    Science.gov (United States)

    ... can be prevented or minimized by limiting the number of embryos that are put into the woman's body. Learn More Assisted Reproductive Technologies (American Society for Reproductive Medicine) - PDF Also ...

  18. Application of the Human Activity Assistive Technology model for occupational therapy research.

    Science.gov (United States)

    Giesbrecht, Ed

    2013-08-01

    Theoretical models provide a framework for describing practice and integrating evidence into systematic research. There are few models that relate specifically to the provision of assistive technology in occupational therapy practice. The Human Activity Assistive Technology model is an enduring example that has continued to develop by integrating a social model of disability, concepts from occupational therapy theory and principles of assistive technology adoption and abandonment. This study first describes the core concepts of the Human Activity Assistive Technology model and reviews its development over three successive published versions. A review of the research literature reflects application of the model to clinical practice, study design, outcome measure selection and interpretation of results, particularly among occupational therapists. An evaluative framework is used to critique the adequacy of the Human Activity Assistive Technology model for practice and research, exploring attributes of clarity, simplicity, generality, accessibility and importance. Finally, recommendations are proposed for continued development of the model and research applications. Most of the existing research literature employs the Human Activity Assistive Technology model for background and study design; there is emerging evidence to support the core concepts as predictive factors. Although the concepts are generally simple, clear and applicable to occupational therapy practice and research, evolving terminology and outcomes become more complex with the conflation of integrated theories. The development of the Human Activity Assistive Technology model offers enhanced access and application for occupational therapists, but poses challenges to clarity among concepts. Suggestions are made for further development and applications of the model. © 2013 Occupational Therapy Australia.

  19. Technical Assistance and Program Support: DoD Historical Black Colleges and Universities and Minority Institutions Program

    National Research Council Canada - National Science Library

    Andrews, Aaron

    2003-01-01

    ... (His), the United Negro College Fund Special Programs developed and implemented a comprehensive technical assistance and infrastructure program This program has provided HBCUs, HSIs, TCUs, and MIs...

  20. Technology-assisted rehabilitation interventions following pediatric brain injury.

    Science.gov (United States)

    Wade, Shari L; Narad, Megan E; Shultz, Emily L; Kurowski, Brad G; Miley, Aimee E; Aguilar, Jessica M; Adlam, Anna-Lynne R

    2018-04-01

    Following traumatic brain injury (TBI), children experience a variety of physical, motor, speech, and cognitive deficits that can have a long-term detrimental impact. The emergence and popularity of new technologies has led to research into the development of various apps, gaming systems, websites, and robotics that might be applied to rehabilitation. The objective of this narrative review was to describe the current literature regarding technologically-assisted interventions for the rehabilitation of motor, neurocognitive, behavioral, and family impairments following pediatric TBI. We conducted a series of searches for peer-reviewed manuscripts published between 2000 and 2017 that included a technology-assisted component in the domains of motor, language/communication, cognition, behavior, social competence/functioning, family, and academic/school-based functioning. Findings suggested several benefits of utilizing technology in TBI rehabilitation including facilitating engagement/adherence, increasing access to therapies, and improving generalizability across settings. There is fairly robust evidence regarding the efficacy of online family problem-solving therapy in improving behavior problems, executive functioning, and family functioning. There was less compelling, but still promising, evidence regarding the efficacy other technology for motor deficits, apps for social skills, and computerized programs for cognitive skills. Overall, many studies were limited in the rigor of their methodology due to small heterogeneous samples and lack of control groups. Technology-assisted interventions have the potential to enhance pediatric rehabilitation after TBI. Future research is needed to further support their efficacy with larger controlled trials and to identify characteristics of children who are most likely to benefit.

  1. The provision of assistive technology products and services for people with dementia in the United Kingdom.

    Science.gov (United States)

    Gibson, Grant; Newton, Lisa; Pritchard, Gary; Finch, Tracy; Brittain, Katie; Robinson, Louise

    2016-07-01

    In this review we explore the provision of assistive technology products and services currently available for people with dementia within the United Kingdom. A scoping review of assistive technology products and services currently available highlighted 171 products or product types and 331 services. In addition, we assimilated data on the amount and quality of information provided by assistive technology services alongside assistive technology costs. We identify a range of products available across three areas: assistive technology used 'by', 'with' and 'on' people with dementia. Assistive technology provision is dominated by 'telecare' provided by local authorities, with services being subject to major variations in pricing and information provision; few currently used available resources for assistive technology in dementia. We argue that greater attention should be paid to information provision about assistive technology services across an increasingly mixed economy of dementia care providers, including primary care, local authorities, private companies and local/national assistive technology resources. © The Author(s) 2014.

  2. A Multi-Agent Framework for Coordination of Intelligent Assistive Technologies

    DEFF Research Database (Denmark)

    Valente, Pedro Ricardo da Nova; Hossain, S.; Groenbaek, B.

    2010-01-01

    Intelligent care for the future is the IntelliCare project's main priority. This paper describes the design of a generic multi-agent framework for coordination of intelligent assistive technologies. The paper overviews technologies and software systems suitable for context awareness...... and housekeeping tasks, especially for performing a multi-robot cleaning-task activity. It also describes conducted work in the design of a multi-agent platform for coordination of intelligent assistive technologies. Instead of using traditional robot odometry estimation methods, we have tested an independent...

  3. Influences on selection of assistive technology for young children in South Africa: perspectives from rehabilitation professionals.

    Science.gov (United States)

    van Niekerk, Karin; Dada, Shakila; Tönsing, Kerstin

    2017-12-20

    Selection of assistive technology for young children is a complex process. Within a context with limited resources, such as South Africa, research is needed to determine the factors influencing the assistive technology selection process, as these could ultimately either facilitate or hinder the availability and accessibility of affordable, adaptable, acceptable, and high quality assistive technology for this age group. Two asynchronous online focus groups were conducted with 16 rehabilitation professionals to identify the factors they perceived to influence the selection and provision of assistive technology to young children within the South African context. A process of deductive thematic analysis was followed by inductive analysis of the data. Components of the Assistive Technology Device Selection Framework were used as themes to guide the deductive analysis, followed by inductive analysis to create subthemes. The important role of the professional was highlighted in negotiating all the factors to consider in the assistive technology selection and provision process. Adaptation of the Assistive Technology Device Selection Framework is suggested in order to facilitate application to low resourced contexts, such as South Africa. Implications for rehabilitation Assistive technology selection is a complex process with factors pertaining to the users (child and family) of the assistive technology, as well as the rehabilitation professional recommending the assistive technology influencing the process. Although it may be an important factor, the availability of financial resources to purchase assistive technology is not the only determining factor in providing appropriate assistive technology to young children in contexts with limited resources. Formalized support, such as reflective supervision or mentorship programs should be facilitated and utilized by recommending professionals. Home and school visits during assessment ensure a good match between assistive

  4. Technical assistance for an evaluation of international schemes to promote biomass sustainability. Final report

    International Nuclear Information System (INIS)

    Londo, M.

    2009-12-01

    In this technical assistance report to the title subject report is given of Task 1: Review of GREEN-X assumptions on biomass availability and costs; Task 2: Impacts of sustainability criteria on biomass availability and costs; Task 3: Applicability of existing certification schemes; Task 4: Identification of feasible verification options; and Task 5: summary, integration. The key objective of Task 1 is to validate the present and future availability (up to 2020) and costs of biomass energy in the EU 27. The GREEN-X model forecasts the deployment of renewable energy systems under various scenarios in terms of supporting policy instruments, the availability of resources and generation technologies and energy, technology and resource price developments. Objective of task 2 is to assess to what extent the sustainability criteria as specified in the Renewable Energy Directive (RED (EP/EC 2009)) affect availability and costs of biofuels. The objective of task 3 is to assess to what extent national and international certification schemes (existing and under development) would be applicable for safeguarding the sustainability criteria as mentioned in the Renewable Energy Sources (RES) directive. The objective of Task 4 is to identify and analyse feasible options to verify compliance with biomass sustainability criteria, in the case of forest biomass.

  5. Theoretic models for recommendation and implementation of assistive technology

    Directory of Open Access Journals (Sweden)

    Ana Cristina de Jesus Alves

    2016-07-01

    Full Text Available Introduction: The latest international researches seek to understand the factors affecting the successful use of assistive technology devices through studies regarding the assessments systematizing; abandonment of devices; or theoric models that consider the aspects of those devices implementation. In Brazil the researches are focused on developing new technologies and there are still not sufficient studies related to the successful use of devices and ways of assistive technology implementation. Objective: To identify conceptual models used for indication and implementation of assistive technology devices. Method: Literature review. The survey was conducted in six databases: CINAHAL, Eric, GALE, LILACS, MEDLINE e PsycInfo. A critical analysis described by Grant and Booth was used. Results: There are no records of a Brazilian survey and among 29 selected articles, 17 conceptual models used in the area of AT were found; of these, 14 were specific to AT. The results showed that the new conceptual models of TA are under development and the conceptual model “Matching Person and Technology – MPT” was the most mentioned. Conclusion: We can observe that the practices related to TA area in international context shows a correlation with conceptual models, thus, we hope this study might have the capacity to contribute for the propagation of this precepts at national level

  6. An ambient assisted living approach in designing domiciliary services combined with innovative technologies for patients with Alzheimer's disease: a case study.

    Science.gov (United States)

    Cavallo, Filippo; Aquilano, Michela; Arvati, Marco

    2015-02-01

    Alzheimer's disease (AD) is one of the most disabling diseases to affect large numbers of elderly people worldwide. Because of the characteristics of this disease, patients with AD require daily assistance from service providers both in nursing homes and at home. Domiciliary assistance has been demonstrated to be cost effective and efficient in the first phase of the disease, helping to slow down the course of the illness, improve the quality of life and care, and extend independence for patients and caregivers. In this context, the aim of this work is to demonstrate the technical effectiveness and acceptability of an innovative domiciliary smart sensor system for providing domiciliary assistance to patients with AD which has been developed with an Ambient Assisted Living (AAL) approach. The design, development, testing, and evaluation of the innovative technological solution were performed by a multidisciplinary team. In all, 15 sociomedical operators and 14 patients with AD were directly involved in defining the end-users' needs and requirements, identifying design principles with acceptability and usability features and evaluating the technological solutions before and after the real experimentation. A modular technological system was produced to help caregivers continuously monitor the health status, safety, and daily activities of patients with AD. During the experimentation, the acceptability, utility, usability, and efficacy of this system were evaluated as quite positive. The experience described in this article demonstrated that AAL technologies are feasible and effective nowadays and can be actively used in assisting patients with AD in their homes. The extensive involvement of caregivers in the experimentation allowed to assess that there is, through the use of the technological system, a proven improvement in care performance and efficiency of care provision by both formal and informal caregivers and consequently an increase in the quality of life of

  7. Tribal Colleges and Universities/American Indian Research and Education Initiatives Advanced Manufacturing Technical Assistance Project

    Energy Technology Data Exchange (ETDEWEB)

    Atcitty, Stanley [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-02-01

    The overall goal of this project is to establish a network of TCUs with essential advanced manufacturing (AM) facilities, associated training and education programs, and private sector and federal agency partnerships to both prepare an American Indian AM workforce and create economic and employment opportunities within Tribal communities through design, manufacturing, and marketing of high quality products. Some examples of high quality products involve next generation grid components such as mechanical energy storage, cabling for distribution of energy, and electrochemical energy storage enclosures. Sandia National Laboratories (Sandia) is tasked to provide technical advising, planning, and academic program development support for the TCU/American Indian Higher Education Consortium (AIHEC) Advanced Manufacturing Project. The TCUs include Bay Mills Community College (BMCC), Cankdeska Cikana Community College (CCCC), Navajo Technical University (NTU), Southwestern Indian Polytechnic Institute (SIPI), and Salish Kooteani College. AIHEC and Sandia, with collaboration from SIPI, will be establishing an 8-week summer institute on the SIPI campus during the summer of 2017. Up to 20 students from TCUs are anticipated to take part in the summer program. The goal of the program is to bring AM science, technology, engineering, and mathematics (STEM) awareness and opportunities for the American Indian students. Prior to the summer institute, Sandia will be providing reviews on curriculum plans at the each of the TCUs to ensure the content is consistent with current AM design and engineering practice. In addition, Sandia will provide technical assistance to each of the TCUs in regards to their current AM activities.

  8. Cloud-Based Speech Technology for Assistive Technology Applications (CloudCAST).

    Science.gov (United States)

    Cunningham, Stuart; Green, Phil; Christensen, Heidi; Atria, José Joaquín; Coy, André; Malavasi, Massimiliano; Desideri, Lorenzo; Rudzicz, Frank

    2017-01-01

    The CloudCAST platform provides a series of speech recognition services that can be integrated into assistive technology applications. The platform and the services provided by the public API are described. Several exemplar applications have been developed to demonstrate the platform to potential developers and users.

  9. Collision of Media Positions on Assisted Reproductive Technologies

    Science.gov (United States)

    Emelyanova, T. P.; Vopilova, I. E.

    2016-01-01

    An analysis of the discourse on assisted reproductive technologies (ART) indicates the predominance of conservative representations of the family. The appearance of new technologies does not change the image of a "normal" family, because concepts connected with surrogate mothers and egg donors are minimally present in the discourse. In…

  10. Transfer of radiation technology to developing countries

    Science.gov (United States)

    Markovic, Vitomir; Ridwan, Mohammad

    1993-10-01

    Transfer of technology is a complex process with many facets, options and constraints. While the concept is an important step in bringing industrialization process to agricultural based countries, it is clear, however, that a country will only benefit from a new technology if it addresses a real need, and if it can be absorbed and adapted to suit the existing cultural and technological base. International Atomic Energy Agency, as UN body, has a mandate to promote nuclear applicationsand assist Member States in transfer of technology for peaceful applications. This mandate has been pursued by many different mechanisms developed in the past years: technical assistance, coordinated research programmes, scientific and technical meetings, publications, etc. In all these activities the Agency is the organizer and initiator, but main contributions come from expert services from developed countries and, increasingly, from developing countries themselves. The technical cooperation among developing coutries more and more becomes part of different programmes. In particular, regional cooperation has been demonstrated as an effective instrument for transfer of technology from developed and among developing countries. Some examples of actual programmes are given.

  11. 76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

    Science.gov (United States)

    2011-06-17

    ...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

  12. Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy: Team Perspectives.

    Science.gov (United States)

    Gjeraa, Kirsten; Mundt, Anna S; Spanager, Lene; Hansen, Henrik J; Konge, Lars; Petersen, René H; Østergaard, Doris

    2017-07-01

    Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data analysis was deductive, and directed content analysis was used to code the text into the Oxford Non-Technical Skills system for evaluating operating teams' non-technical skills. The most important non-technical skills described by the VATS teams were planning and preparation, situation awareness, problem solving, leadership, risk assessment, and teamwork. These non-technical skills enabled the team to achieve shared mental models, which in turn facilitated their efforts to anticipate next steps. This was viewed as important by the participants as they saw VATS lobectomy as a high-risk procedure with complementary and overlapping scopes of practice between surgical and anesthesia subteams. This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important additions to the shared mental model construct: planning and preparation, risk assessment, and leadership. Shared mental models are crucial for patient safety because they enable VATS teams to anticipate problems through adaptive patterns of both implicit and explicit coordination. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  13. Independent technical review of Savannah River Site Defense Waste Processing Facility technical issues

    International Nuclear Information System (INIS)

    1992-07-01

    The Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) will vitrify high-level radioactive waste that is presently stored as liquid, salt-cake, and sludge in 51 waste-storage tanks. Construction of the DWPF began in 1984, and the Westinghouse Savannah Company (WSRC) considers the plant to be 100% turned over from construction and 91% complete. Cold-chemical runs are scheduled to begin in November 1992, and hot start up is projected for June 1994. It is estimated that the plant lifetime must exceed 15 years to complete the vitrification of the current, high-level tank waste. In a memo to the Assistant Secretary for Defense Programs (DP-1), the Assistant Secretary for Environmental Restoration and Waste management (EM-1) established the need for an Independent Technical Review (ITR), or the Red Team, to ''review process technology issues preventing start up of the DWPF.'' This report documents the findings of an Independent Technical Review (ITR) conducted by the Department of Energy (DOE), Office of Environmental Restoration and Waste Management (EM), at the request of the Assistant Secretary for Environmental Restoration and Waste Management, of specified aspects of Defense Waste Process Facility (DWPF) process technology. Information for the assessment was drawn from documents provided to the ITR Team by the Westinghouse Savannah River Company (WSRC), and presentations, discussions, interviews, and tours held at the Savannah River Site (SRS) during the weeks of February and March 9, 1992

  14. Preferences and Practices among Students Who Read Braille and Use Assistive Technology

    Science.gov (United States)

    D'Andrea, Frances Mary

    2012-01-01

    Introduction: Students who read braille use assistive technology to engage in literacy tasks and to access the general curriculum. There is little research on the ways in which technology has changed the reading and writing practices and preferences of students who use braille, nor is there much research on how assistive technology is learned by…

  15. Technical descriptions of ten irrigation technologies for conserving energy

    Energy Technology Data Exchange (ETDEWEB)

    Harrer, B.J.; Wilfert, G.L.

    1983-05-01

    Technical description of ten technologies which were researched to save energy in irrigated agriculture are presented. These technologies are: well design and development ground water supply system optimization, column and pump redesign, variable-speed pumping, pipe network optimization, reduced-pressure center-pivot systems, low-energy precision application, automated gated-pipe system, computerized irrigation scheduling, and instrumented irrigation scheduling. (MHR)

  16. Computer assisted radiology

    International Nuclear Information System (INIS)

    Lemke, H.U.; Jaffe, C.C.; Felix, R.

    1993-01-01

    The proceedings of the CAR'93 symposium present the 126 oral papers and the 58 posters contributed to the four Technical Sessions entitled: (1) Image Management, (2) Medical Workstations, (3) Digital Image Generation - DIG, and (4) Application Systems - AS. Topics discussed in Session (1) are: picture archiving and communication systems, teleradiology, hospital information systems and radiological information systems, technology assessment and implications, standards, and data bases. Session (2) deals with computer vision, computer graphics, design and application, man computer interaction. Session (3) goes into the details of the diagnostic examination methods such as digital radiography, MRI, CT, nuclear medicine, ultrasound, digital angiography, and multimodality imaging. Session (4) is devoted to computer-assisted techniques, as there are: computer assisted radiological diagnosis, knowledge based systems, computer assisted radiation therapy and computer assisted surgical planning. (UWA). 266 figs [de

  17. Enhancing public involvement in assistive technology design research.

    Science.gov (United States)

    Williamson, Tracey; Kenney, Laurence; Barker, Anthony T; Cooper, Glen; Good, Tim; Healey, Jamie; Heller, Ben; Howard, David; Matthews, Martin; Prenton, Sarah; Ryan, Julia; Smith, Christine

    2015-05-01

    To appraise the application of accepted good practice guidance on public involvement in assistive technology research and to identify its impact on the research team, the public, device and trial design. Critical reflection and within-project evaluation were undertaken in a case study of the development of a functional electrical stimulation device. Individual and group interviews were undertaken with lay members of a 10 strong study user advisory group and also research team members. Public involvement was seen positively by research team members, who reported a positive impact on device and study designs. The public identified positive impact on confidence, skills, self-esteem, enjoyment, contribution to improving the care of others and opportunities for further involvement in research. A negative impact concerned the challenge of engaging the public in dissemination after the study end. The public were able to impact significantly on the design of an assistive technology device which was made more fit for purpose. Research team attitudes to public involvement were more positive after having witnessed its potential first hand. Within-project evaluation underpins this case study which presents a much needed detailed account of public involvement in assistive technology design research to add to the existing weak evidence base. The evidence base for impact of public involvement in rehabilitation technology design is in need of development. Public involvement in co-design of rehabilitation devices can lead to technologies that are fit for purpose. Rehabilitation researchers need to consider the merits of active public involvement in research.

  18. The Office of Industrial Technologies technical reports

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The US Department of Energy's Office of Industrial Technologies (OIT) conducts R D activities which focus on the objectives of improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial energy conservation. The Office also conducts programs to reduce waste generation, increase recycling efforts, and improve the use of wastes as process feedstocks. An active program of technology transfer and education supports these activities and encourages adoption of new technologies. To accomplish these objectives OIT cooperates with the private sector to identify its technological needs and to share R D efforts. R D is conducted to the point that a new technology is shown to work and that it can be transferred to the private sector end-users. This bibliography contains information on all scientific and technical reports sponsored by the DOE Industrial Energy Conservation Program during the years 1988--1990.

  19. 77 FR 37390 - Notice Inviting Informal Public Comment on Training and Technical Assistance and Disability...

    Science.gov (United States)

    2012-06-21

    ... and Technical Assistance and Disability Inclusion Programming AGENCY: Corporation for National and... Disability Inclusion Programming; correction. SUMMARY: The Corporation for National and Community Service... Disability Inclusion Programming that appeared in the Federal Register of June 11, 2012 (75 FR 34354). That...

  20. [Cognitive remediation and cognitive assistive technologies in schizophrenia].

    Science.gov (United States)

    Sablier, J; Stip, E; Franck, N

    2009-04-01

    Cognitive impairments are a core feature in schizophrenia. They impact several cognitive abilities but most importantly attention, memory and executive functions, consequently leading to great difficulties in everyday life. Most schizophrenia patients need assurance and require assistance and help from care workers, family members and friends. Family members taking care of a patient have additional daily work burden, and suffer psychological anguish and anxiety. Therefore, improving cognitive functions in schizophrenia patients is essential for the well-being of patients and their relatives. Reducing these deficits may decrease the economic burden to the health care system through lower numbers of hospital admissions and shorter hospitalisation periods, for example. Cognitive rehabilitation was developed to address the limited benefits of conventional treatments on cognitive deficits through the use of assistive technology as a means of enhancing memory and executive skills in schizophrenia patients. To provide clinicians with comprehensive knowledge on cognitive trainings, programs of remediation, and cognitive assistive technologies. Literature review. A search in the electronic databases (PubMed, EMBASE, Index Medicus) for recent articles in the last 10 years related to cognitive remediation published in any language using the words: cognitive and remediation or rehabilitation and schizophrenia, and a search for chapters in psychiatry and rehabilitation textbooks. We found 392 articles and 112 review paper mainly in English. First, we identified cognitive remediation programs that were beneficial to schizophrenia patients. Programs available in French (IPT, RECOS, and RehaCom) and others (CET, NET, CRT, NEAR, APT and CAT) were identified. In addition, since memory and executive function impairments could be present in people without schizophrenia, we reviewed inventories of cognitive assistive technologies proven to enhance cognitive skills in other populations

  1. Using an artificial agent as a behavior model to promote assistive technology acceptance

    NARCIS (Netherlands)

    Fountoukidou, Sofia; Ham, Jaap; Matzat, Uwe; Midden, Cees

    2018-01-01

    Despite technological advancements in assistive technologies, studies show high rates of non-use. Because of the rising numbers of people with disabilities, it is important to develop strategies to increase assistive technology acceptance. The current research investigated the use of an artificial

  2. [Change management: An analysis of actors; perceptions about technical assistance in the Democratic Republic of Congo].

    Science.gov (United States)

    Ribesse, Nathalie; Iyeti, Alain; Macq, Jean

    2015-01-01

    Technical assistance (TA) is a common component of health system strengthening interventions. This type of intervention is too often designed and evaluated according to a logic that fails to take into account social complexity. Actors' perceptions are one element of this complexity. This article presents a study conducted in the Democratic Republic of Congo designed to identify perceptions concerning two types of technical support providers for health system strengthening: long-term technical assistants (agents of development agencies) and provincial technical advisors (agents of the Ministry of Health). Interviews were conducted with an innovative tool inspired by the principles of systems thinking. Interviewees were actors involved in a TA intervention in the province of Bandundu. Their expectations regarding TA providers were identified in terms of personal characteristics (knowledge, know-how and interpersonal skills), roles, and styles of interaction for capacity building ("interventionist/ prescriptive axes"). Interviewees emphasized the importance of mutual learning and the quality of interactions, which depends on TA provider's interpersonal skills and mutual willingness. Perceptions of TA provider's characteristics tend to be similar, but several differences were observed concerning the expectations about the roles of TAs, and the style that should be adopted for capacity building. Ignoring these differences in expectations may be a threat to the effectiveness of TA.

  3. The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status

    International Nuclear Information System (INIS)

    1979-03-01

    The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules.

  4. 75 FR 21349 - Solicitation for a Cooperative Agreement-Evaluation of Technical Assistance for Evidence-Based...

    Science.gov (United States)

    2010-04-23

    ... Criminal Justice Systems (the Framework), which is designed to advance constructive change in local level... analysis plan; Develop data collection instruments to include site visit protocols, structured or semi...--Evaluation of Technical Assistance for Evidence-Based Decisionmaking in Local Criminal Justice Systems AGENCY...

  5. Technology-assisted education in graduate medical education: a review of the literature

    OpenAIRE

    Jwayyed, Sharhabeel; Stiffler, Kirk A; Wilber, Scott T; Southern, Alison; Weigand, John; Bare, Rudd; Gerson, Lowell W

    2011-01-01

    Studies on computer-aided instruction and web-based learning have left many questions unanswered about the most effective use of technology-assisted education in graduate medical education. Objective We conducted a review of the current medical literature to report the techniques, methods, frequency and effectiveness of technology-assisted education in graduate medical education. Methods A structured review of MEDLINE articles dealing with "Computer-Assisted Instruction," "Internet or World W...

  6. "You Will": Technology, Magic, and the Cultural Contexts of Technical Communication.

    Science.gov (United States)

    Kitalong, Karla Saari

    2000-01-01

    Provides some background on the use of magical language in technical contexts, gives examples of magical discourse in technology advertisements and newsmagazine articles, and proposes a technical communication pedagogy of media analysis. Notes that the proposed pedagogy involves students conducting diagnostic critiques of media texts and affords…

  7. A brain-computer interface as input channel for a standard assistive technology software.

    Science.gov (United States)

    Zickler, Claudia; Riccio, Angela; Leotta, Francesco; Hillian-Tress, Sandra; Halder, Sebastian; Holz, Elisa; Staiger-Sälzer, Pit; Hoogerwerf, Evert-Jan; Desideri, Lorenzo; Mattia, Donatella; Kübler, Andrea

    2011-10-01

    Recently brain-computer interface (BCI) control was integrated into the commercial assistive technology product QualiWORLD (QualiLife Inc., Paradiso-Lugano, CH). Usability of the first prototype was evaluated in terms of effectiveness (accuracy), efficiency (information transfer rate and subjective workload/NASA Task Load Index) and user satisfaction (Quebec User Evaluation of Satisfaction with assistive Technology, QUEST 2.0) by four end-users with severe disabilities. Three assistive technology experts evaluated the device from a third person perspective. The results revealed high performance levels in communication and internet tasks. Users and assistive technology experts were quite satisfied with the device. However, none could imagine using the device in daily life without improvements. Main obstacles were the EEG-cap and low speed.

  8. Fix It with TAPE: Repurposing Technology to Be Assistive Technology for Students with High-Incidence Disabilities

    Science.gov (United States)

    Bouck, Emily C.; Shurr, Jordan C.; Tom, Kinsey; Jasper, Andrea D.; Bassette, Laura; Miller, Bridget; Flanagan, Sara M.

    2012-01-01

    This article discusses how practitioners can repurpose technology--common and socially desirable technology in particular--to be assistive technology for students with high-incidence disabilities. The authors provide a framework for practitioners to consider technology for repurposing: TAPE (Transportable, Available, Practical, Engaging) and…

  9. Emerging issues and current trends in assistive technology use 2007-2010: practising, assisting and enabling learning for all.

    Science.gov (United States)

    Abbott, Chris; Brown, David; Evett, Lindsay; Standen, Penny

    2014-11-01

    Following an earlier review in 2007, a further review of the academic literature relating to the uses of assistive technology (AT) by children and young people was completed, covering the period 2007-2011. As in the earlier review, a tripartite taxonomy: technology uses to train or practise, technology uses to assist learning and technology uses to enable learning, was used in order to structure the findings. The key markers for research in this field and during these three years were user involvement, AT on mobile mainstream devices, the visibility of AT, technology for interaction and collaboration, new and developing interfaces and inclusive design principles. The paper concludes by locating these developments within the broader framework of the Digital Divide.

  10. Study on the efficient export control for the Intangible Transfer of Technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Sung-ho; Choi, Sun-do; Lee, Chansuh; Kim, Jong-sook [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2015-10-15

    Technical Data may take forms such as document, drawing, description, report, manual and instruction. And, it can be written or recorded on storage medium such as disk, tape and read-only memories. Technical assistance may take forms such as instruction, skill, training, working knowledge and consulting services. Technical data or assistance can be transferred by intangible manners such as an electronic means (e.g. email, internet, telephone or fax) and through the oral (e.g. seminar, meeting or workshop). Currently, ROK's export control regulation is not classified between the transfer of listed items (or general technology) and intangible transfer of technology (ITT). It may make a loop hole or cause inefficient implementation of export control. The purpose of this study is to suggest the efficient control method for ITT independent from item control method. From the result of this study, several main feathers in regulations of developed countries are drawn. First, they define that technical assistance (or support) is the object of permission. And, they have a clear distinction between resident and non-resident. Second, The UK and Germany do not control the technical assistance related to construction and operation of nuclear facilities for peaceful use, as long as technology does not transfer to recipient that has a nuclear proliferation concerns such as the DPRK, Iran or Pakistan.

  11. Assisted Reproductive Technology Has No Association with Autism Spectrum Disorders: The Taiwan Birth Cohort Study

    Science.gov (United States)

    Lung, For-Wey; Chiang, Tung-Liang; Lin, Shio-Jean; Lee, Meng-Chih; Shu, Bih-Ching

    2018-01-01

    The use of assisted reproduction technology has increased over the last two decades. Autism spectrum disorders and assisted reproduction technology share many risk factors. However, previous studies on the association between autism spectrum disorders and assisted reproduction technology have shown inconsistent results. The purpose of this study…

  12. Stay in the Box! Embedded Assistive Technology Improves Access for Students with Disabilities

    Directory of Open Access Journals (Sweden)

    Katherine Koch

    2017-11-01

    Full Text Available Assistive technology is not only a required component of a student’s IEP; it can be an effective way to help students with (and without disabilities access their education and to provide them with required instructional accommodations. Teachers, however, are often not adequately prepared in their pre-service course work and ongoing professional development to address the technology needs of their special education students and have not had the opportunities to access technology due to limited availability and cost. While assistive technology can be purchased to augment an existing computer, it is often unnecessary to do that. Both Microsoft and Apple operating systems in “off-the-shelf” computers and handheld devices have embedded assistive technology that is easy to access and easy to use. This embedded technology can help teachers become familiar with technology and assist students with sensory, physical, learning, and attention disabilities, and it might have practical applications with Universal Design for Learning. This paper provides a discussion on how embedded technology can support students with disabilities in the school setting and provides examples for access and use.

  13. 78 FR 39260 - Applications for New Awards; Technical Assistance and Dissemination To Improve Services and...

    Science.gov (United States)

    2013-07-01

    ... collaborative network of State deaf-blind TA projects. Using advances in communication and social media, the... their academic and social outcomes; empower children who are deaf-blind to engage in self-advocacy so... Improve Services and Results for Children With Disabilities--State Technical Assistance Projects To...

  14. 77 FR 36501 - Applications for New Awards: Technical Assistance and Dissemination To Improve Services and...

    Science.gov (United States)

    2012-06-19

    ... consumers on the Center's Web site, as required under paragraph (a)(1)(i) in the Technical Assistance and... components needed to support the use and sustainability of effective services and evidence-based..., guidance, implementation tools, and other materials at no cost to the consumer on: (A) Current...

  15. The "Second Place" Problem: Assistive Technology in Sports and (Re) Constructing Normal.

    Science.gov (United States)

    Baker, D A

    2016-02-01

    Objections to the use of assistive technologies (such as prostheses) in elite sports are generally raised when the technology in question is perceived to afford the user a potentially "unfair advantage," when it is perceived as a threat to the purity of the sport, and/or when it is perceived as a precursor to a slippery slope toward undesirable changes in the sport. These objections rely on being able to quantify standards of "normal" within a sport so that changes attributed to the use of assistive technology can be judged as causing a significant deviation from some baseline standard. This holds athletes using assistive technologies accountable to standards that restrict their opportunities to achieve greatness, while athletes who do not use assistive technologies are able to push beyond the boundaries of these standards without moral scrutiny. This paper explores how constructions of fairness and "normality" impact athletes who use assistive technology to compete in a sporting venue traditionally populated with "able-bodied" competitors. It argues that the dynamic and obfuscated construction of "normal" standards in elite sports should move away from using body performance as the measuring stick of "normal," toward alternate forms of constructing norms such as defining, quantifying, and regulating the mechanical actions that constitute the critical components of a sport. Though framed within the context of elite sports, this paper can be interpreted more broadly to consider problems with defining "normal" bodies in a society in which technologies are constantly changing our abilities and expectations of what normal means.

  16. Geothermal direct-heat utilization assistance. Federal Assistance Program quarterly project progress report, April 1--June 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    This report summarizes geothermal technical assistance, R and D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the third quarter of FY98 (April--June, 1998). It describes 231 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with included requests for general information including material for high school and university students, and material on geothermal heat pumps, resource and well data, spacing heating and cooling, greenhouses, aquaculture, equipment, district heating, resorts and spas, industrial applications, snow melting and electric power. Research activities include work on model construction specifications for line shaft submersible pumps and plate heat exchangers, and a comprehensive aquaculture developers package. A brochure on Geothermal Energy in Klamath County was developed for state and local tourism use. Outreach activities include the publication of the Quarterly Bulletin (Vol. 19, No. 2) with articles on research at the Geo-Heat Center, sustainability of geothermal resources, injection well drilling in Boise, ID and a greenhouse project in the Azores. Other outreach activities include dissemination of information mainly through mailings of publications, tours of local geothermal uses, geothermal library acquisitions and use, participation in workshops, short courses and technical meetings by the staff, and progress monitor reports on geothermal activities.

  17. Three-Dimensional Path Planning Software-Assisted Transjugular Intrahepatic Portosystemic Shunt: A Technical Modification

    Energy Technology Data Exchange (ETDEWEB)

    Tsauo, Jiaywei, E-mail: 80732059@qq.com; Luo, Xuefeng, E-mail: luobo-913@126.com [West China Hospital of Sichuan University, Institute of Interventional Radiology (China); Ye, Linchao, E-mail: linchao.ye@siemens.com [Siemens Ltd, Healthcare Sector (China); Li, Xiao, E-mail: simonlixiao@gmail.com [West China Hospital of Sichuan University, Institute of Interventional Radiology (China)

    2015-06-15

    PurposeThis study was designed to report our results with a modified technique of three-dimensional (3D) path planning software assisted transjugular intrahepatic portosystemic shunt (TIPS).Methods3D path planning software was recently developed to facilitate TIPS creation by using two carbon dioxide portograms acquired at least 20° apart to generate a 3D path for overlay needle guidance. However, one shortcoming is that puncturing along the overlay would be technically impossible if the angle of the liver access set and the angle of the 3D path are not the same. To solve this problem, a prototype 3D path planning software was fitted with a utility to calculate the angle of the 3D path. Using this, we modified the angle of the liver access set accordingly during the procedure in ten patients.ResultsFailure for technical reasons occurred in three patients (unsuccessful wedged hepatic venography in two cases, software technical failure in one case). The procedure was successful in the remaining seven patients, and only one needle pass was required to obtain portal vein access in each case. The course of puncture was comparable to the 3D path in all patients. No procedure-related complication occurred following the procedures.ConclusionsAdjusting the angle of the liver access set to match the angle of the 3D path determined by the software appears to be a favorable modification to the technique of 3D path planning software assisted TIPS.

  18. Technical assistance to Department of Energy/Office of Operational Safety Assurance Program for remedial action

    International Nuclear Information System (INIS)

    Denham, D.H.; Cross, F.T.; Kennedy, W.E. Jr.; Marks, S.; Soldat, J.K.; Stenner, R.D.

    1986-01-01

    This project was initiated in FY 1984 to provide technical assistance to the Department of Energy (DOE), Office of Operational Safety (OOS) in developing and implementing its Assurance Program for Remedial Action (APRA), i.e., overview of the DOE remedial action programs. During this second year of the project,* the technical assistance included report and procedure reviews, and assistance with conducting the Uranium Mill Tailings Remedial Action Program (UMTRAP) Office (DOE/AL) appraisal. This included participation in preappraisal visits to UMTRAP sites in Canonsburg, Pennsylvania; Grand Junction, Colorado; and Salt Lake City, Utah. Pacific Northwest Laboratory (PNL) also transferred the PNL-developed document review software to the Oak Ridge Associated Universities (ORAU) staff in Grand Junction, Colorado, in anticipation of future document reviews by the ORAU staff. Other accomplishments have included publication of two formal documents and three project reports, preparation and presentation of five topical reports at national and international meetings, two foreign trip reports, and comments on proposed draft standards of the Environmental Protection Agency (40 CFR 193). The project manager has also participated on National Council on Radiation Protection and Measurements (NCRP) and American Society for Testing and Materials (ASTM) subcommittees developing decommissioning standards, as well as International Atomic Energy Agency (IAEA) advisory groups developing environmental monitoring guidelines

  19. UMTRA project technical assistance contractor quality assurance implementation plan for surface and ground water

    International Nuclear Information System (INIS)

    1994-09-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance Contractor (TAC) Quality Assurance Implementation Plan (QAIP) outlines the primary requirements for integrating quality functions for TAC technical activities applied to the surface and ground water phases of the UMTRA Project. The QAIP is subordinate to the latest issue of the UMTRA Project TAC Quality Assurance Program Plan (QAPP). The QAIP addresses technical aspects of the TAC UMTRA Project surface and ground water programs. The QAIP is authorized and approved by the TAC Project Manager and QA manager. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization activities are carried out in a manner that will protect public health and safety, promote the success of the UMTRA Project and meet or exceed contract requirements

  20. 25 CFR 30.111 - When should the tribal governing body or school board request technical assistance?

    Science.gov (United States)

    2010-04-01

    ... maximize the time the tribal governing body or school board has to develop an alternative definition of AYP... should request technical assistance before formally notifying the Secretary of its intention to waive the Secretary's definition of AYP. Approval of Alternative Definition ...

  1. IAEA Technical Cooperation and the NPT

    International Nuclear Information System (INIS)

    Barretto, Paulo M.C.; Cetto, Ana Maria

    2005-01-01

    The NPT rests on three interlinked pillars: cooperation in peaceful uses of nuclear energy, verified nuclear non-proliferation, and nuclear disarmament. This article looks specifically at the first pillar and its linkage with the second one. Non-nuclear weapon States are the vast majority of NPT Parties. The right of NPT Parties to have access to information, exchange of equipment and materials is explicitly recognized in Article IV of the Treaty. This Article stipulates that all Parties of the Treaty undertake to facilitate and have the right to participate in the fullest possible exchange of equipment, materials and scientific and technological information for the peaceful uses of nuclear energy. A successful campaign after the 1995 NPT Review Conference increased the NPT membership from 178 to near universality, and today 189 States are Parties to the Treaty. In the same period the IAEA's membership increased from 127 to 138. Today all IAEA Member States are participating in the Agency's Technical Cooperation Programme (TCP) in varying mixed capacities of donors or recipients. The IAEA, although not referred to in Article IV of the NPT, plays a major role in planning and implementing multilateral cooperation stipulated in the Treaty. It encourages and assists research, development and application of atomic energy; it provides technical advice, training, materials, services and equipment; fosters exchange of scientific and technical information; develops standards and guidelines for the appropriate utilization of nuclear technology and materials, and builds strategic partnerships to increase the leverage of the limited resources available. At all times, the Agency seeks to support the use of nuclear technology in a way that is safe for humans and the environment. All these activities are related to key statutory functions of the IAEA. Efforts to assist Member States are impressive. Since its inception in 1957, the Agency has provided direct assistance valued at

  2. High-Temperature Adhesives for Thermally Stable Aero-Assist Technologies

    Science.gov (United States)

    Eberts, Kenneth; Ou, Runqing

    2013-01-01

    Aero-assist technologies are used to control the velocity of exploration vehicles (EVs) when entering Earth or other planetary atmospheres. Since entry of EVs in planetary atmospheres results in significant heating, thermally stable aero-assist technologies are required to avoid the high heating rates while maintaining low mass. Polymer adhesives are used in aero-assist structures because of the need for high flexibility and good bonding between layers of polymer films or fabrics. However, current polymer adhesives cannot withstand temperatures above 400 C. This innovation utilizes nanotechnology capabilities to address this need, leading to the development of high-temperature adhesives that exhibit high thermal conductivity in addition to increased thermal decomposition temperature. Enhanced thermal conductivity will help to dissipate heat quickly and effectively to avoid temperature rising to harmful levels. This, together with increased thermal decomposition temperature, will enable the adhesives to sustain transient high-temperature conditions.

  3. Technical Education Outreach in Materials Science and Technology Based on NASA's Materials Research

    Science.gov (United States)

    Jacobs, James A.

    2003-01-01

    The grant NAG-1 -2125, Technical Education Outreach in Materials Science and Technology, based on NASA s Materials Research, involves collaborative effort among the National Aeronautics and Space Administration s Langley Research Center (NASA-LaRC), Norfolk State University (NSU), national research centers, private industry, technical societies, colleges and universities. The collaboration aims to strengthen math, science and technology education by providing outreach related to materials science and technology (MST). The goal of the project is to transfer new developments from LaRC s Center for Excellence for Structures and Materials and other NASA materials research into technical education across the nation to provide educational outreach and strengthen technical education. To achieve this goal we are employing two main strategies: 1) development of the gateway website and 2) using the National Educators Workshop: Update in Engineering Materials, Science and Technology (NEW:Updates). We have also participated in a number of national projects, presented talks at technical meetings and published articles aimed at improving k-12 technical education. Through the three years of this project the NSU team developed the successful MST-Online site and continued to upgrade and update it as our limited resources permitted. Three annual NEW:Updates conducted from 2000 though 2002 overcame the challenges presented first by the September 11,2001 terrorist attacks and the slow U.S. economy and still managed to conduct very effective workshops and expand our outreach efforts. Plans began on NEW:Update 2003 to be hosted by NASA Langley as a part of the celebration of the Centennial of Controlled Flight.

  4. [APPLICATION OF COMPUTER-ASSISTED TECHNOLOGY IN ANALYSIS OF REVISION REASON OF UNICOMPARTMENTAL KNEE ARTHROPLASTY].

    Science.gov (United States)

    Jia, Di; Li, Yanlin; Wang, Guoliang; Gao, Huanyu; Yu, Yang

    2016-01-01

    To conclude the revision reason of unicompartmental knee arthroplasty (UKA) using computer-assisted technology so as to provide reference for reducing the revision incidence and improving the level of surgical technique and rehabilitation. The relevant literature on analyzing revision reason of UKA using computer-assisted technology in recent years was extensively reviewed. The revision reasons by computer-assisted technology are fracture of the medial tibial plateau, progressive osteoarthritis of reserved compartment, dislocation of mobile bearing, prosthesis loosening, polyethylene wear, and unexplained persistent pain. Computer-assisted technology can be used to analyze the revision reason of UKA and guide the best operating method and rehabilitation scheme by simulating the operative process and knee joint activities.

  5. 8th Cambridge Workshop on Universal Access and Assistive Technology

    CERN Document Server

    Lazar, Jonathan; Heylighen, Ann; Dong, Hua

    2016-01-01

    This book presents the proceedings of the 8th Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT '14), incorporating the 11th Cambridge Workshop on Rehabilitation Robotics, held in Cambridge, England in March 2016. It presents novel and state-of-the-art research from an international group of leaders in the fields of universal access and assistive technology. It explores various issues including the reconciliation of usability, accessibility and inclusive design, the design of inclusive assistive and rehabilitation systems, measuring product demand and human capabilities, data mining and visualizing inclusion, legislation in inclusive design, and situational inclusive interfaces (automotive and aerospace). This book provides an invaluable resource to researchers, postgraduates, design practitioners, therapists and clinical practitioners, as well as design teachers.

  6. The Use of Technology in the Medical Assisting Classroom

    Science.gov (United States)

    Kozielski, Tracy L.

    2014-01-01

    The growing presence of technology in health care has infiltrated educational institutions. Numerous software and hardware technologies have been designed to improve student learning; however, their use in the classroom is unclear. The purpose of this qualitative case study was to examine the experiences of medical assisting faculty using…

  7. The Effects of Assistive Technology on Students with Disabilities

    Science.gov (United States)

    Sze, Susan

    2009-01-01

    The purpose of this article is to analyze assistive technology literature for students with disabilities. The literature search rendered N = 57 literature and n = 17 manuscripts were identified in the special education technology field studies. Each source was evaluated according to the following criteria: types of disability, learning objectives…

  8. Assistive technology evaluations: Remote-microphone technology for children with Autism Spectrum Disorder.

    Science.gov (United States)

    Schafer, Erin C; Wright, Suzanne; Anderson, Christine; Jones, Jessalyn; Pitts, Katie; Bryant, Danielle; Watson, Melissa; Box, Jerrica; Neve, Melissa; Mathews, Lauren; Reed, Mary Pat

    The goal of this study was to conduct assistive technology evaluations on 12 children diagnosed with Autism Spectrum Disorder (ASD) to evaluate the potential benefits of remote-microphone (RM) technology. A single group, within-subjects design was utilized to explore individual and group data from functional questionnaires and behavioral test measures administered, designed to assess school- and home-based listening abilities, once with and once without RM technology. Because some of the children were unable to complete the behavioral test measures, particular focus was given to the functional questionnaires completed by primary teachers, participants, and parents. Behavioral test measures with and without the RM technology included speech recognition in noise, auditory comprehension, and acceptable noise levels. The individual and group teacher (n=8-9), parent (n=8-9), and participant (n=9) questionnaire ratings revealed substantially less listening difficulty when RM technology was used compared to the no-device ratings. On the behavioral measures, individual data revealed varied findings, which will be discussed in detail in the results section. However, on average, the use of the RM technology resulted in improvements in speech recognition in noise (4.6dB improvement) in eight children, higher auditory working memory and comprehension scores (12-13 point improvement) in seven children, and acceptance of poorer signal-to-noise ratios (8.6dB improvement) in five children. The individual and group data from this study suggest that RM technology may improve auditory function in children with ASD in the classroom, at home, and in social situations. However, variability in the data and the inability of some children to complete the behavioral measures indicates that individualized assistive technology evaluations including functional questionnaires will be necessary to determine if the RM technology will be of benefit to a particular child who has ASD. Copyright

  9. Assessment of training and technical assistance needs of Colorectal Cancer Control Program Grantees in the U.S.

    Science.gov (United States)

    Escoffery, Cam; Hannon, Peggy; Maxwell, Annette E; Vu, Thuy; Leeman, Jennifer; Dwyer, Andrea; Mason, Caitlin; Sowles, Shaina; Rice, Ketra; Gressard, Lindsay

    2015-01-31

    Practitioners often require training and technical assistance to build their capacity to select, adapt, and implement evidence-based interventions (EBIs). The CDC Colorectal Cancer Control Program (CRCCP) aims to promote CRC screening to increase population-level screening. This study identified the training and technical assistance (TA) needs and preferences for training related to the implementation of EBIs among CRCCP grantees. Twenty-nine CRCCP grantees completed an online survey about their screening activities, training and technical assistance in 2012. They rated desire for training on various evidence-based strategies to increase cancer screening, evidence-based competencies, and program management topics. They also reported preferences for training formats and facilitators and barriers to trainings. Many CRCCP grantees expressed the need for training with regards to specific EBIs, especially system-level and provider-directed EBIs to promote CRC screening. Grantees rated these EBIs as more difficult to implement than client-oriented EBIs. Grantees also reported a moderate need for training regarding finding EBIs, assessing organizational capacity, implementing selected EBIs, and conducting process and outcome evaluations. Other desired training topics reported with higher frequency were partnership development and data collection/evaluation. Grantees preferred training formats that were interactive such as on-site trainings, webinars or expert consultants. Public health organizations need greater supports for adopting evidence-based interventions, working with organizational-level change, partnership development and data management. Future capacity building efforts for the adoption of EBIs should focus on systems or provider level interventions and key processes for health promotion and should be delivered in a variety of ways to assist local organizations in cancer prevention and control.

  10. 77 FR 43616 - Office of the Assistant Secretary for Office of Disability Employment Program, National Technical...

    Science.gov (United States)

    2012-07-25

    ... Center will utilize social media and other electronic tools to influence its target audience of youth as..., foster care, transportation, mental health, vocational rehabilitation and others on effective practices..., National Technical Assistance and Demonstration Center on Preparing Youth With Disabilities for Employment...

  11. Integrating research, legal technical assistance, and advocacy to inform shared use legislation in Mississippi.

    Science.gov (United States)

    Spengler, John O; Frost, Natasha R; Bryant, Katherine K

    2014-01-01

    The purpose of this article was to describe the process by which research findings informed the successful passage of legislation designed to increase opportunities for physical activity in Mississippi, and discuss implications and lessons learned from this process. The article is descriptive and conceptual, and addresses the collaborative process by which research, legal technical assistance, and advocacy informed and shaped shared use legislation in Mississippi. Collaborators informing this article were an Active Living Research grantee, a staff attorney with the Public Health Law Center, the American Heart Association Mississippi Government Relations Director, and community partners. The American Heart Association and Public Health Law Center developed policy guidance in the form of sample language for legislation as a starting point for states in determining policy needed to eliminate or reduce barriers to the shared use of school recreational facilities. The policy guidance was informed by evidence from Active Living Research-funded research studies. The American Heart Association, supporting a bill shaped by the policy guidance, led the effort to advocate for successful shared use legislation in Mississippi. Research should be policy relevant and properly translated and disseminated. Legal technical assistance should involve collaboration with both researchers and advocates so that policymakers have the information to make evidence-based decisions. Government relations directors should collaborate with legal technical staff to obtain and understand policy guidance relevant to their advocacy efforts. Effective collaborations, with an evidence-based approach, can lead to informed, successful policy change.

  12. Access to the Arts through Assistive Technology.

    Science.gov (United States)

    Frame, Charles

    Personnel in the rehabilitation field have come to recognize the possibilities and implications of computers as assistive technology for disabled persons. This manual provides information on how to adapt the Unicorn Board, Touch Talker/Light Talker overlays, the Adaptive Firmware Card setup disk, and Trace-Transparent Access Module (T-TAM) to…

  13. Appropriability, Technological Opportunity, Market Demand, and Technical Change - Empirical Evidence from Switzerland

    OpenAIRE

    Harabi, Najib

    1992-01-01

    The purpose of this paper is to analyze both theoretically and empirically those factors which underlay the - empirically observable - inter-industry differences in technical progress. At the theoretical level economists agree more and more that technical progress can be explained at the industry level by the following three factors: (1) the technological opportunities, (2) the appropriability conditions, meaning the ability to capture and protect the results of technical innovations and (3) ...

  14. Technology transfer of brain-computer interfaces as assistive technology: barriers and opportunities.

    Science.gov (United States)

    Nijboer, F

    2015-02-01

    This paper provides an analysis of perspectives from different stakeholders on the state-of-the-art of BCI. Three barriers for technology transfer of BCIs as access technologies are identified. First, BCIs are developed with a narrow focus on creating a reliable technology, while a broader focus on creating a usable technology is needed. Second, the potential target group, which could benefit from BCIs as access technologies is expected to be very small. Development costs are therefore high, while reimbursements are expected to be low, which challenges the commercial viability. Third, potential target users should be much more included in the design process of BCIs to ensure that the end-products meet technical, ethical, legal and social requirements. These three issues need to be urgently addressed so that target users may benefit from this promising technology. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  15. Commercialization of Plasma-Assisted Technologies: The Indian Experience

    Science.gov (United States)

    John, P. I.

    The paper describes an initiative by the Institute for Plasma Research (IPR), India in establishing links with the Indian industry for developing and commercialising advanced plasma-based industrial technologies. This has culminated in the creation of a self-financing technology development, incubation, demonstration and delivery facility. A business plan for converting the knowledge base to commercially viable technologies conceived technology as a product and the industry as the market and addressed issues like resistance to new technologies, the key role of entrepreneur, thrust areas and the necessity of technology incubation and delivery. Success of this strategy is discussed in a few case studies. We conclude by identifying the cost, environmental, strategic and techno-economic aspects, which would be the prime drivers for plasma-assisted manufacturing technology in India.

  16. Internet-Assisted Technologies for English Language Teaching in Turkish Universities

    Science.gov (United States)

    Celik, Serkan

    2013-01-01

    Although the enormous potential of the Internet has gained attention in Internet-assisted language teaching (IALT), a solid background of research is still lacking about/investigating English as a foreign language (EFL) teachers' use of Internet assistive technologies. This study set out to determine Turkish university level EFL instructors'…

  17. Energizing Government Decision-Makers with the Facts on Solar Technology, Policy, and Integration

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The Solar Technical Assistance Team (STAT) is a network of solar technology and implementation experts who provide timely, unbiased expertise to assist policymakers and regulators in making informed decisions about solar programs and policies. Government officials can submit requests directly to the STAT for technical assistance. STAT then partners with experts in solar policy, regulation, finance, technology, and other areas to deliver accurate, up-to-date information to state and local decision makers. The STAT responds to requests on a wide range of issues -- including, but not limited to, feed-in tariffs, renewable portfolio standards, rate design, program design, workforce and economic impacts of solar on jurisdictions, and project financing.

  18. New generation emerging technologies for neurorehabilitation and motor assistance.

    Science.gov (United States)

    Frisoli, Antonio; Solazzi, Massimiliano; Loconsole, Claudio; Barsotti, Michele

    2016-12-01

    This paper illustrates the application of emerging technologies and human-machine interfaces to the neurorehabilitation and motor assistance fields. The contribution focuses on wearable technologies and in particular on robotic exoskeleton as tools for increasing freedom to move and performing Activities of Daily Living (ADLs). This would result in a deep improvement in quality of life, also in terms of improved function of internal organs and general health status. Furthermore, the integration of these robotic systems with advanced bio-signal driven human-machine interface can increase the degree of participation of patient in robotic training allowing to recognize user's intention and assisting the patient in rehabilitation tasks, thus representing a fundamental aspect to elicit motor learning.

  19. Technical Status Report of the Regulatory Assistance Project: October 2001-February 2003

    Energy Technology Data Exchange (ETDEWEB)

    2003-08-01

    This report details the work undertaken from October 2001 to February 2003 by the Regulatory Assistance Project under subcontract to the National Renewable Energy Laboratory. The objectives of this work were to develop regulatory policy options that would reduce the institutional and infrastructure barriers to full-value deployment of distributed power systems. Specific tasks included leading technical workshops on removing or overcoming regulatory barriers to distributed resources for state utility regulators and developing a draft model rule on emission performance standards for distributed generation.

  20. Preschool teachers' perception and use of hearing assistive technology in educational settings.

    Science.gov (United States)

    Nelson, Lauri H; Poole, Bridget; Muñoz, Karen

    2013-07-01

    This study explored how often sound-field amplification and personal frequency-modulated (FM) systems are used in preschool classrooms, teacher perceptions of advantages and disadvantages of using hearing assistive technology, and teacher recommendations for hearing assistive technology use. The study used a cross-sectional survey design. Participants were professionals who provided services to preschool-age children who are deaf or hard of hearing in public or private schools. A total of 306 surveys were sent to 162 deaf education programs throughout the United States; 99 surveys were returned (32%). Simple statistics were used to describe the quantitative survey results; content analysis was completed on open-ended survey comments. Surveys were received from teachers working at listening and spoken language preschool programs (65%) and at bilingual-bicultural and total communication preschool programs (35%). Most respondents perceived that hearing assistive technology improved students' academic performance, speech and language development, behavior, and attention in the classroom. The majority of respondents also reported that they definitely would or probably would recommend a sound-field system (77%) or personal FM system (71%) to other educators. Hearing assistive technology is frequently used in preschool classrooms of children who are deaf or hard of hearing, with generally positive teacher perceptions of the benefits of using such technology.

  1. Final Technical Report Microwave Assisted Electrolyte Cell for Primary Aluminum Production

    Energy Technology Data Exchange (ETDEWEB)

    Xiaodi Huang; J.Y. Hwang

    2007-04-18

    This research addresses the high priority research need for developing inert anode and wetted cathode technology, as defined in the Aluminum Industry Technology Roadmap and Inert Anode Roadmap, with the performance targets: a) significantly reducing the energy intensity of aluminum production, b) ultimately eliminating anode-related CO2 emissions, and c) reducing aluminum production costs. This research intended to develop a new electrometallurgical extraction technology by introducing microwave irradiation into the current electrolytic cells for primary aluminum production. This technology aimed at accelerating the alumina electrolysis reduction rate and lowering the aluminum production temperature, coupled with the uses of nickel based superalloy inert anode, nickel based superalloy wetted cathode, and modified salt electrolyte. Michigan Technological University, collaborating with Cober Electronic and Century Aluminum, conducted bench-scale research for evaluation of this technology. This research included three sub-topics: a) fluoride microwave absorption; b) microwave assisted electrolytic cell design and fabrication; and c) aluminum electrowinning tests using the microwave assisted electrolytic cell. This research concludes that the typically used fluoride compound for aluminum electrowinning is not a good microwave absorbing material at room temperature. However, it becomes an excellent microwave absorbing material above 550°C. The electrowinning tests did not show benefit to introduce microwave irradiation into the electrolytic cell. The experiments revealed that the nickel-based superalloy is not suitable for use as a cathode material; although it wets with molten aluminum, it causes severe reaction with molten aluminum. In the anode experiments, the chosen superalloy did not meet corrosion resistance requirements. A nicked based alloy without iron content could be further investigated.

  2. Content analysis to locate assistive technology in Queensland's motor injury insurance rehabilitation legislation and guidelines.

    Science.gov (United States)

    Steel, Emily J

    2018-06-08

    Reforms to Australia's disability and rehabilitation sectors have espoused the potential of assistive technology as an enabler. As new insurance systems are being developed it is timely to examine the structure of existing systems. This exploratory study examined the policies guiding assistive technology provision in the motor accident insurance sector of one Australian state. Policy documents were analyzed iteratively with set of qualitative questions to understand the intent and interpretation of policies guiding assistive technology provision. Content analysis identified relevant sections and meaningful terminology, and context analysis explored the dominant perspectives informing policy. The concepts and language of assistive technology are not part of the policy frameworks guiding rehabilitation practice in Queensland's motor accident insurance sector. The definition of rehabilitation in the legislation is consistent contemporary international interpretations that focus on optimizing functioning in interaction with the environment. However, the supporting documents are focused on recovery from injuries where decisions are guided by clinical need and affordability. The policies frame rehabilitation in a medical model that assistive technology provision from the rehabilitation plan. The legislative framework provides opportunities to develop and improve assistive technology provision as part of an integrated approach to rehabilitation.

  3. Evaluating Instructor Technology Integration in Community and Technical Colleges: A Performance Evaluation Matrix

    Science.gov (United States)

    Del Favero, Marietta; Hinson, Janice M.

    2007-01-01

    The press for implementing technology based instructional delivery systems in community and technical colleges is well documented. Yet faculty face numerous challenges in integrating technology into instruction (AL-Bataineh & Brooks, 2003; Groves & Zemel, 2000; Khoury, 1997). Stimulating faculty ownership in technology, diffusion of technology use…

  4. Preschool Teachers' Perception and Use of Hearing Assistive Technology in Educational Settings

    Science.gov (United States)

    Nelson, Lauri H.; Poole, Bridget; Munoz, Karen

    2013-01-01

    Purpose: This study explored how often sound-field amplification and personal frequency-modulated (FM) systems are used in preschool classrooms, teacher perceptions of advantages and disadvantages of using hearing assistive technology, and teacher recommendations for hearing assistive technology use. Method: The study used a cross-sectional survey…

  5. Trends and correlates of good perinatal outcomes in assisted reproductive technology.

    Science.gov (United States)

    Joshi, Nikhil; Kissin, Dmitry; Anderson, John E; Session, Donna; Macaluso, Maurizio; Jamieson, Denise J

    2012-10-01

    To estimate trends in good perinatal outcomes (singleton live births at term with birthweight more than 2,500 g) among live births after assisted reproductive technology in the United States from 2000 to 2008, and associated factors among singletons in 2008. Using retrospective cohort data from the National Assisted Reproductive Technology Surveillance System from 2000 to 2008, we calculated relative change and χ tests for trend in the proportion of good perinatal outcomes among assisted reproductive technology live births (n=444,909) and liveborn singletons (n=222,500). We conducted univariable analyses followed by multiple logistic regression to estimate the effects of various characteristics on the outcome among singletons born in 2008 after fresh, nondonor assisted reproductive technology cycles (n=20,780). The proportion of good perinatal outcomes among all liveborn neonates increased from 38.6% in 2000 to 42.5% in 2008, whereas it declined marginally among singletons from 83.6% to 83.4%. One previous birth, transfer of fewer than three embryos, and the presence of fewer than three fetal hearts on 6-week ultrasound examination were associated with good perinatal outcome among singletons. Non-Hispanic black race, tubal factor infertility, uterine factor infertility, ovulatory disorder, and 5-day embryo culture were associated with reduced odds for a good outcome. The strongest association was the presence of one fetal heart compared with more than two (adjusted odds ratio 2.43, 95% confidence interval 1.73-3.42). From 2000 to 2008, good perinatal outcomes increased among assisted reproductive technology live births. Among singleton live births, odds for good outcome were greatest with the presence of a single fetal heart and lowest in women of non-Hispanic black race. II.

  6. The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status (Arabic Edition)

    International Nuclear Information System (INIS)

    1979-03-01

    The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules.

  7. The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status (Chinese Edition)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1979-03-15

    The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules.

  8. The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status (Spanish Edition)

    International Nuclear Information System (INIS)

    1979-03-01

    The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules. [es

  9. The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status (Russian Edition)

    International Nuclear Information System (INIS)

    1979-03-01

    The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules. [ru

  10. The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status (Chinese Edition)

    International Nuclear Information System (INIS)

    1979-03-01

    The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules.

  11. The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status (French Edition)

    International Nuclear Information System (INIS)

    1979-03-01

    The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules. [fr

  12. UMTRA project technical assistance contractor quality assurance implementation plan for surface and ground water, Revision 2

    International Nuclear Information System (INIS)

    1995-11-01

    This document contains the Technical Assistance Contractor (TAC) Quality Assurance Implementation Plan (QAIP) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. The QAIP outlines the primary requirements for integrating quality functions for TAC technical activities applied to the surface and ground water phases of the UMTRA Project. The QA program is designed to use monitoring, audit, and surveillance activities as management tools to ensure that UMTRA Project activities are carried out in amanner to protect public health and safety, promote the success of the UMTRA Project, and meet or exceed contract requirements

  13. Field Test of Advanced Duct-Sealing Technologies Within the Weatherization Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Ternes, MP

    2001-12-05

    A field test of an aerosol-spray duct-sealing technology and a conventional, best-practice approach was performed in 80 homes to determine the efficacy and programmatic needs of the duct-sealing technologies as applied in the U.S. Department of Energy Weatherization Assistance Program. The field test was performed in five states: Iowa, Virginia, Washington, West Virginia, and Wyoming. The study found that, compared with the best-practice approach, the aerosol-spray technology is 50% more effective at sealing duct leaks and can potentially reduce labor time and costs for duct sealing by 70%, or almost 4 crew-hours. Further study to encourage and promote use of the aerosol-spray technology within the Weatherization Assistance Program is recommended. A pilot test of full production weatherization programs using the aerosol-spray technology is recommended to develop approaches for integrating this technology with other energy conservation measures and minimizing impacts on weatherization agency logistics. In order to allow or improve adoption of the aerosol spray technology within the Weatherization Assistance Program, issues must be addressed concerning equipment costs, use of the technology under franchise arrangements with Aeroseal, Inc. (the holders of an exclusive license to use this technology), software used to control the equipment, safety, and training. Application testing of the aerosol-spray technology in mobile homes is also recommended.

  14. The VOICES/VOCES success story: effective strategies for training, technical assistance and community-based organization implementation.

    Science.gov (United States)

    Hamdallah, Myriam; Vargo, Sue; Herrera, Jennifer

    2006-08-01

    The Centers for Disease Control and Prevention's Diffusion of Effective Behavioral Interventions (DEBI) project successfully disseminated VOICES/VOCES, a brief video-based HIV risk reduction intervention targeting African American and Latino heterosexual men and women at risk for HIV infection. Elements of the dissemination strategy included a comprehensive and user-friendly intervention kit, comprising (a) an implementationmanual and othermaterials necessary for conducting the intervention (b) a Training of Facilitators (TOF) curriculum used to teach agency staff how to implement the EBI in their setting, (c) a network of expert trainers who attend a training institute to become adept at using the TOF curriculum to train facilitators, (d) a comprehensive training coordination center to plan and deliver TOF trainings, (e) proactive technical assistance to trainers, and (f) post-TOF technical assistance for local implementers. This article reports on those strategies and a local CBO's successful participation in DEBI, resulting implementation of VOICES/VOCES, with unique approaches to adaptation and tailoring.

  15. Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nati...

  16. Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nat...

  17. Current perspectives in robotic assisted surgery.

    Science.gov (United States)

    Binet, Aurélien; Ballouhey, Quentin; Chaussy, Yann; de Lambert, Guénolée; Braïk, Karim; Villemagne, Thierry; Becmeur, François; Fourcade, Laurent; Lardy, Hubert

    2018-02-23

    From classical surgery to Robotic Assisted Surgery, there is a long way allowed by Minimal Invasive Surgery' improvements. The last three decades have witnessed a prodigious development of minimally invasive surgery (MIS) and especially in the field of laparoscopic pediatric surgery but there are several limitations in the use of conventional laparoscopic surgery and Robotic Assisted Surgery was developed to relieve these drawbacks. This new technology enables today the performance of a wide variety of procedures in children with a minimally invasive approach. As for all new technologies, an objective evaluation is essential with the need to respond to several questions: Is the technology feasible? Is the technology safe? Is the technology efficient? Does it bring about benefits compared with current technology? What are the procedures derived from most benefits of robotic assistance? How to assume the transition from open surgery to Minimal Invasive access for RAS? In the first part of this article, the authors give details about technical concerns and then describe the implementation process with its organization, pitfalls, successes, and issues from human resources and financial standpoints. The learning curve is then described and a special focus on small children weighing less than 15 Kg is developed. Finally, the concept of evaluation of this emerging technology is evocated and financial concerns are developed.

  18. Emergency notification and assistance technical operations manual. Emergency preparedness and response. Date effective: 1 February 2007

    International Nuclear Information System (INIS)

    2007-01-01

    The Convention on Early Notification of a Nuclear Accident (the 'Early Notification Convention') and the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (the 'Assistance Convention') are the prime legal instruments that establish an international framework to facilitate the exchange of information and the prompt provision of assistance in the event of a nuclear or radiological emergency, with the aim of minimizing the consequences. The International Atomic Energy Agency has specific functions assigned to it under these Conventions, to which, in addition to a large number of States, the World Health Organization (WHO), the World Meteorological Organization (WMO) and the Food and Agriculture Organization of the United Nations (FAO) are full parties. The arrangements provided between the IAEA, States that are IAEA Member States and/or Parties to one or both Conventions, all other relevant international intergovernmental organizations, and other States for facilitating the implementation of these Conventions - specifically concerning those articles that are operational in nature - are documented in the Emergency Notification and Assistance Technical Operations Manual (ENATOM). ENATOM was first issued on 18 January 1989. Member States, Parties to the Early Notification and Assistance Conventions, relevant international organizations and other States have since then regularly received updates to the manual. In 2000, a complete revision of ENATOM was reissued as EPR-ENATOM (2000) to reflect technological developments, changes in operational concepts, views on standards in the area of emergency preparedness and response, and Member States' expectations. Since then ENATOM has been reviewed and reissued biennially in line with the review cycle of the Joint Radiation Emergency Management Plan of the International Organizations (the 'Joint Plan'). Since the last edition of ENATOM in 2004, several factors have warranted some modifications to

  19. From assistive to enhancing technology: should the treatment-enhancement distinction apply to future assistive and augmenting technologies?

    Science.gov (United States)

    Minerva, Francesca; Giubilini, Alberto

    2018-04-01

    The treatment-enhancement distinction is often used to delineate acceptable and unacceptable medical interventions. It is likely that future assistive and augmenting technologies will also soon develop to a level that they might be considered to provide users, in particular those with disabilities, with abilities that go beyond natural human limits, and become in effect an enhancing technology. In this paper, we describe how this process might take place, and discuss the moral implications of such developments. We argue that such developments are morally acceptable and indeed desirable. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  20. Assisted reproductive technology in Saudi Arabia.

    Science.gov (United States)

    Abduljabbar, Hassan S; Amin, Rubina

    2009-04-01

    This paper aims at presenting details of the application of assisted reproductive technology and the impact of the Islamic law (Sharia) on its practice in the Kingdom of Saudi Arabia (KSA). Analysis of the data sourced from manual searches of bibliographies from key articles showed that this technology in KSA is practiced in a strictly religious manner and certain aspects of the technology are completely forbidden. It further showed that lack of an official government in-vitro fertilization (IVF) registry to gather information on the activities of IVF clinics has limited the data available for international comparisons. Sharing information internationally could allow religiously concerned infertile couples to have access to the reproductive services in the Kingdom. It would further improve the quality of care, enhance certain techniques like in-vitro maturation and experimentation on embryos, by providing resources that are currently unavailable, keeping in view the religious beliefs and avoiding conflicts.

  1. Technical assistance for development of thermally conductive nitride filler for epoxy molding compounds

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Ho Jin; Song, Kee Chan; Jung, In Ha

    2005-07-15

    Technical assistance was carried out to develop nitride filler for thermally conductive epoxy molding compounds. Carbothermal reduction method was used to fabricate silicon nitride powder from mixtures of silica and graphite powders. Microstructure and crystal structure were observed by using scanning electron microscopy and x-ray diffraction technique. Thermal properties of epoxy molding compounds containing silicon nitride were measured by using laser flash method. Fabrication process of silicon nitride nanowire was developed and was applied to a patent.

  2. Geothermal direct-heat utilization assistance. Quarterly progress report, April--June 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    Progress is reported on the following R&D activities: evaluation of lineshaft turbine pump problems, geothermal district heating marketing strategy, and greenhouse peaking analysis. Other activities are reported on technical assistance, technology transfer, and the geothermal progress monitor.

  3. Feeding assistive robotics, socio-technological imaginaries and care

    DEFF Research Database (Denmark)

    Nickelsen, Niels Christian Mossfeldt

    The media and political/managerial levels focus on the opportunities to re-perform Denmark through digitization. Feeding assistive robotics is a welfare technology, relevant to citizens with low or no function in their arms. Despite national dissemination strategies, it proves difficult to recruit...

  4. Liver CT image processing: a short introduction of the technical elements.

    Science.gov (United States)

    Masutani, Y; Uozumi, K; Akahane, Masaaki; Ohtomo, Kuni

    2006-05-01

    In this paper, we describe the technical aspects of image analysis for liver diagnosis and treatment, including the state-of-the-art of liver image analysis and its applications. After discussion on modalities for liver image analysis, various technical elements for liver image analysis such as registration, segmentation, modeling, and computer-assisted detection are covered with examples performed with clinical data sets. Perspective in the imaging technologies is also reviewed and discussed.

  5. Liver CT image processing: A short introduction of the technical elements

    International Nuclear Information System (INIS)

    Masutani, Y.; Uozumi, K.; Akahane, Masaaki; Ohtomo, Kuni

    2006-01-01

    In this paper, we describe the technical aspects of image analysis for liver diagnosis and treatment, including the state-of-the-art of liver image analysis and its applications. After discussion on modalities for liver image analysis, various technical elements for liver image analysis such as registration, segmentation, modeling, and computer-assisted detection are covered with examples performed with clinical data sets. Perspective in the imaging technologies is also reviewed and discussed

  6. State-Targeted Funding and Technical Assistance to Increase Access to Medication Treatment for Opioid Use Disorder.

    Science.gov (United States)

    Abraham, Amanda J; Andrews, Christina M; Grogan, Colleen M; Pollack, Harold A; D'Aunno, Thomas; Humphreys, Keith; Friedmann, Peter D

    2018-04-01

    As the United States grapples with an opioid epidemic, expanding access to effective treatment for opioid use disorder is a major public health priority. Identifying effective policy tools that can be used to expand access to care is critically important. This article examines the relationship between state-targeted funding and technical assistance and adoption of three medications for treating opioid use disorder: oral naltrexone, injectable naltrexone, and buprenorphine. This study draws from the 2013-2014 wave of the National Drug Abuse Treatment System Survey, a nationally representative, longitudinal study of substance use disorder treatment programs. The sample includes data from 695 treatment programs (85.5% response rate) and representatives from single-state agencies in 49 states and Washington, D.C. (98% response rate). Logistic regression was used to examine the relationships of single-state agency targeted funding and technical assistance to availability of opioid use disorder medications among treatment programs. State-targeted funding was associated with increased program-level adoption of oral naltrexone (adjusted odds ratio [AOR]=3.14, 95% confidence interval [CI]=1.49-6.60, p=.004) and buprenorphine (AOR=2.47, 95% CI=1.31-4.67, p=.006). Buprenorphine adoption was also correlated with state technical assistance to support medication provision (AOR=1.18, 95% CI=1.00-1.39, p=.049). State-targeted funding for medications may be a viable policy lever for increasing access to opioid use disorder medications. Given the historically low rates of opioid use disorder medication adoption in treatment programs, single-state agency targeted funding is a potentially important tool to reduce mortality and morbidity associated with opioid disorders and misuse.

  7. The Agency's Technical Co-operation programme with Ethiopia, 1982-1992. Country programme summaries

    International Nuclear Information System (INIS)

    1992-01-01

    The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With some $2.5 million of Agency support received, Ethiopia ranks 54th among all recipients of technical assistance in the period 1958 through 1991. More than half of the assistance received during the past ten years has been provided in the form of equipment (55%), complemented by expert services (16%) and training (29%). The best part of the resources was provided by the Technical Assistance and Co-operation Fund (88%), the remainder was made available through assistance in kind (6%), UNDP and extrabudgetary contributions (3% each). During the past ten years, project disbursements went to four major areas: agriculture (45%), nuclear medicine (35%), nuclear safety (14%) and nuclear engineering and technology (6%)

  8. Continuing education for Physical Education teachers: Assistive Technology in inclusive education

    Directory of Open Access Journals (Sweden)

    Maria Luiza Salzani Fiorini

    2017-05-01

    Full Text Available This study aimed at describing the development of continuing education for physical education teachers towards the incorporation of Assistive Technology and the creation of favorable conditions to an inclusive school. The methodology employed was reflective and collaborative research. Two teachers who were facing difficulties to include a physically disabled student and one student with global developmental delay took part in the study. The continuing education plan comprised three steps: 1 reflecting on their own practice after watching a video and planning one lesson, together with the researcher, seeking to incorporate Assistive Technology and favor inclusion; 2 videoing the lesson; 3 evaluating and reflecting on what was planned and what was executed and planning a new lesson. Some factors were seen to be essential to the development of continuing education: considering the teacher’s demand, developing collaborative work, promoting reflection on the practices and having Assistive Technology as a support to the human element.

  9. Assistive Technologies for Aged Care: Supportive or Empowering?

    Directory of Open Access Journals (Sweden)

    Suchada Vichitvanichphong

    2014-11-01

    Full Text Available The main objective of this paper is to explore the potentials of assistive technologies to support seniors’ independent living. The work looks at two salient aspects of utilizing technologies for elderly, namely direct support and empowering technologies. The research undertakes a comprehensive analysis of attempts that have been made through investigation of the literature. For this purpose, a realist review of relevant papers published since 2000 has been conducted. The paper concludes that although much research in this area targets the direct support for older adults, the effective use of technologies to maintain seniors’ physical and cognitive abilities requires further investigations. This can provide avenues of opportunities that would empower seniors for their independent living.

  10. Technology transfer for development

    International Nuclear Information System (INIS)

    Abraham, D.

    1990-07-01

    The IAEA has developed a multifaceted approach to ensure that assistance to Member States results in assured technology transfer. Through advice and planning, the IAEA helps to assess the costs and benefits of a given technology, determine the basic requirements for its efficient use in conditions specific to the country, and prepare a plan for its introduction. This report describes in brief the Technical Co-operation Programmes

  11. Proceedings of symposium on technology in laboratories by department of engineering and technical services

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-06-01

    The Symposium on Technology in Laboratories was held on March 14 and 15 at Ceratopia Toki in Toki City, Gifu Prefecture, Japan. This symposium was hosted by National Institute for Fusion Science (NIFS). There were 407 participants from many Japanese universities, national laboratories, technical colleges and from some Japanese Industrial world. One hundred and thirty one papers were presented in the symposium. Technical experience and new techniques were reported and discussed being divided into five sessions; technology of fabrication, device technology, diagnostic and control system, cryogenics, computer and data processing. (author)

  12. Inclusive Design for Assistive Technology

    DEFF Research Database (Denmark)

    Herriott, Richard

    2014-01-01

    base. However, the conditions under which mainstream ID operates are not the same as those for AT. The scale of projects is smaller as tend to be the organisations that do such work. The models for ID design processes are designed for commercially-driven, medium-to-large scale concerns. This raises...... the question of whether AT design processes fit neatly into a model created for a different context . Semi-structured interviews were carried out with eight/nine designers of assistive technology. This provided raw data concerning the processes used by the designers in a range of products including...

  13. Emergency notification and assistance technical operations manual. Emergency preparedness and response. Date effective: 1 December 2000

    International Nuclear Information System (INIS)

    2000-11-01

    nuclear accident or radiological emergency even if there is no direct transboundary impact, primarily for the purposes of minimizing the consequences of the accident or emergency e.g. for trade and tourism and providing advice to their nationals living, working and travelling in the Accident State. The provision of such information would also help to avoid unnecessary international rumours and concerns. In order to be able to provide such information in an emergency, States need to be prepared in advance. Moreover, States are encouraged to provide warning messages and other relevant information within the ENATOM framework even in the event of a nuclear accident or radiological emergency that does not trigger the Early Notification Convention but is of international concern. Recent work on clarifying emergency classification schemes for nuclear facilities and on identifying the key information to be transmitted for technical assessment purposes, the development of emergency preparedness and response standards and improvements in communications technology (e-mail and Web servers) have been reflected in the arrangements described in this new edition of ENATOM. ENATOM addresses the issue of requesting and providing assistance in the event of a nuclear accident or radiological emergency. For the provision of assistance, the IAEA is establishing a global Emergency Response Network (ERNET) of teams suitably qualified to respond rapidly, on a regional basis, to nuclear accidents or radiological emergencies. ENATOM states the Secretariat's expectations rather than prescribing arrangements. Nevertheless, all States, including States which are neither Member States of the IAEA nor party to either Convention, and the relevant International Intergovernmental Organisations are invited to adopt the arrangements described in it for providing and receiving information about nuclear accidents and radiological emergencies. In the event of a nuclear accident or radiological emergency, the

  14. 77 FR 74862 - OneCPD Technical Assistance and Capacity Building Needs Assessment

    Science.gov (United States)

    2012-12-18

    ... and group learning activities to benefit CPD grantees and subrecipients. Members of the affected... forms of information technology, e.g., permitting electronic submission of responses. This notice also... across grantees and assist in prioritizing the development of tools, products and group learning...

  15. Validating a measure to assess factors that affect assistive technology use by students with disabilities in elementary and secondary education.

    Science.gov (United States)

    Zapf, Susan A; Scherer, Marcia J; Baxter, Mary F; H Rintala, Diana

    2016-01-01

    The purpose of this study was to measure the predictive validity, internal consistency and clinical utility of the Matching Assistive Technology to Child & Augmentative Communication Evaluation Simplified (MATCH-ACES) assessment. Twenty-three assistive technology team evaluators assessed 35 children using the MATCH-ACES assessment. This quasi-experimental study examined the internal consistency, predictive validity and clinical utility of the MATCH-ACES assessment. The MATCH-ACES assessment predisposition scales had good internal consistency across all three scales. A significant relationship was found between (a) high student perseverance and need for assistive technology and (b) high teacher comfort and interest in technology use (p = (0).002). Study results indicate that the MATCH-ACES assessment has good internal consistency and validity. Predisposition characteristics of student and teacher combined can influence the level of assistive technology use; therefore, assistive technology teams should assess predisposition factors of the user when recommending assistive technology. Implications for Rehabilitation Educational and medical professionals should be educated on evidence-based assistive technology assessments. Personal experience and psychosocial factors can influence the outcome use of assistive technology. Assistive technology assessments must include an intervention plan for assistive technology service delivery to measure effective outcome use.

  16. Nuclear engineering and manufacturing technology transfer coproduction with technical assistance

    International Nuclear Information System (INIS)

    Marillier, J.C.; Boury, C.

    1985-10-01

    This paper emphasizes in the specific areas of design, engineering, and component production. This paper presents what Framatome has to offer in these areas and its export oriented philosophy. Then, a typical example of successful implementation of this technology transfer philosophy is the collaboration with the South Korean firm, Korea Heavy Industries Corporation (KHIC) for the supply of KNU 9 and KNU 10 power stations

  17. Nuclear technology education at the new AKR-2 of the technical university Dresden

    International Nuclear Information System (INIS)

    Hansen, W.; Wolf, T.; Hurtado, A.

    2009-01-01

    The former research and training reactor AKR-1 was completely renewed, including the peripheral technical systems and the modernization of the reactor instrumentation with digital control technology. After licensing by the local authorities the technical University Dresden has Germany's latest training reactor. Basic experiments are performed for the following disciplines: nuclear energy technology, physics, teacher training, industrial engineering, nuclear medicine. Training courses cover nuclear medicine, nuclear physics, radiation protection and reactor physics. Further tasks include research program on neutron detectors, neutron physics, radiation spectroscopy, nuclear data bases.

  18. Innovation Implementation: The Role of Technology Diffusion Agencies

    Directory of Open Access Journals (Sweden)

    Jasmin Robertson

    2008-08-01

    Full Text Available A great deal of ‘innovation failure’ can be attributed to ineffective implementation, rather than failure of the innovation itself. External agencies such as technology diffusion agencies (TDAs have been created to assist organisations to implement innovation successfully, but there has been little empirical research investigating their roles. This paper presents a longitudinal case study of failed innovation implementation, and highlights in particular the role that technology diffusion agencies can play to prevent such failure in future cases. Results indicate the importance of changes in organisational factors such as training, climate, and management support during the implementation process in predicting outcomes, and imply a role for TDAs in assisting with both technical and non-technical aspects of innovation implementation.

  19. Transferring technologies for agricultural development in the Third World

    International Nuclear Information System (INIS)

    Richards, J.I.

    1992-01-01

    The Agriculture Laboratory of the IAEA's Seibersdorf Laboratories aims to assist developing countries to apply appropriate nuclear and related technologies to agricultural research. Research and development, training and technical support are all included in the Laboratory's programme. This article describes the procedures involved in providing technological assistance, from the definition of a problem requiring technological help to the provision of training and support services. Practical examples include application of controlled-release formulations of herbicides, studies of biological nitrogen fixation, and the sterile insect techniques

  20. Innovative assistive technology in Finnish public elderly-care services: a focus on productivity.

    Science.gov (United States)

    Melkas, Helinä

    2013-01-01

    The study investigates ways in which technology use may help municipalities improve productivity in elderly-care services. A case study of Finnish elderly-care services provides responses concerning impacts, decisions and options in technology use. The research data were collected during a 'smart home pilot' implemented in four housing service units. Over 60 assistive devices were introduced in the smart homes used during short-term housing periods. Both customers and care staff's experiences as well as processes related to the use of assistive devices were investigated on the basis of survey questionnaires, interviews and feedback. Assistive device-related operational processes were investigated with the help of concepts of 'resource focus', 'lost motion' and 'intermediate storage'. Four central operational processes were identified. Design and desirability as well as costs, such as opportunity costs of assistive devices were also a focus. Significant factors related to productivity were disclosed in this way. Technology use versus productivity needs to be 'circled' from the points of view of individual users, workplaces, service processes, and larger technology options. There must be long-term patience to introduce technology properly into use to produce positive impacts on productivity. Customers and care staff have an interlinked, vital role to play as decision-makers' informants.

  1. An assistive technology for hearing-impaired persons: analysis, requirements and architecture.

    Science.gov (United States)

    Mielke, Matthias; Grunewald, Armin; Bruck, Rainer

    2013-01-01

    In this contribution, a concept of an assistive technology for hearing-impaired and deaf persons is presented. The concept applies pattern recognition algorithms and makes use of modern communication technology to analyze the acoustic environment around a user, identify critical acoustic signatures and give an alert to the user when an event of interest happened. A detailed analysis of the needs of deaf and hearing-impaired people has been performed. Requirements for an adequate assisting device have been derived from the results of the analysis, and have been turned into an architecture for its implementation that will be presented in this article. The presented concept is the basis for an assistive system which is now under development at the Institute of Microsystem Engineering at the University of Siegen.

  2. The Agency's Technical Co-operation programme with Guatemala, 1982-1992. Country programme summaries

    International Nuclear Information System (INIS)

    1992-01-01

    The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $3 million of Agency support received, Guatemala ranks 46th among all recipients of technical assistance in the period 1958 - 1991. Almost three quarters of the assistance during the past ten years has been provided in the form of equipment (72%), followed by training (15%) and expert services (13%). Seventy-eight per cent of the resources were provided by the Technical Assistance and Co-operation Fund, the rest was made available through extrabudgetary contributions (21%) and assistance in kind (1%). With regard to project disbursement by sector, the largest areas have been nuclear physics and chemistry (37%), agriculture (28%), nuclear medicine (16%) and hydrology (8%). The remaining 11% were shared by general atomic energy development, nuclear raw materials, nuclear engineering and technology, and nuclear safety

  3. American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance for Geothermal Resource Evaluation Projects

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Breckenridge; Thomas R. Wood; Joel Renner

    2010-09-01

    The purpose of this document is to report on the evaluation of geothermal resource potential on and around three different United States (U. S.) Air Force Bases (AFBs): Nellis AFB and Air Force Range (AFR) in the State of Nevada (see maps 1 and 5), Holloman AFB in the State of New Mexico (see map 2), and Mountain Home AFB in the State of Idaho (see map 3). All three sites are located in semi-arid parts of the western U. S. The U. S. Air Force, through its Air Combat Command (ACC) located at Langley AFB in the State of Virginia, asked the Federal Energy Management Program (FEMP) for technical assistance to conduct technical and feasibility evaluations for the potential to identify viable geothermal resources on or around three different AFBs. Idaho National Laboratory (INL) is supporting FEMP in providing technical assistance to a number of different Federal Agencies. For this report, the three different AFBs are considered one project because they all deal with potential geothermal resource evaluations. The three AFBs will be evaluated primarily for their opportunity to develop a geothermal resource of high enough quality grade (i.e., temperature, productivity, depth, etc.) to consider the possibility for generation of electricity through a power plant. Secondarily, if the resource for the three AFBs is found to be not sufficient enough for electricity generation, then they will be described in enough detail to allow the base energy managers to evaluate if the resource is suitable for direct heating or cooling. Site visits and meetings by INL personnel with the staff at each AFB were held in late FY-2009 and FY-2010. This report provides a technical evaluation of the opportunities and challenges for developing geothermal resources on and around the AFBs. An extensive amount of literature and geographic information was evaluated as a part of this assessment. Resource potential maps were developed for each of the AFBs.

  4. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    International Nuclear Information System (INIS)

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described

  5. Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

    Science.gov (United States)

    ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

    2005-01-01

    The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

  6. Dental nursing education and the introduction of technology-assisted learning.

    Science.gov (United States)

    Sheridan, C; Gorman, T; Claffey, N

    2008-11-01

    The aim of this paper is to explore the profile of dental nursing students in the National Dental Nurse Training Programme of Ireland and their adjustment to a technology-assisted learning environment. Evaluation by students of the course and their reactions to the course were analysed. Dental nurses must possess the skills and knowledge to proficiently function in the modern day dental surgery. The implementation of a dental nurse programme that is heavily reliant on technology has started to create a group of dental nurses equipped with basic skills to access and retrieve information over a lifetime. However, the transition to a technology-assisted learning environment including online learning activities requires adaptation and expertise by educators and students alike. Careful evaluation and stakeholder feedback is imperative in the creation and maintaining of a quality programme. In conclusion, the students in this study responded well to the transition to a technology-based learning environment. Furthermore, the findings of this study suggest that the use of an online environment is an effective and stimulating learning environment for the students of a dental nurse programme; however, familiarity skills and knowledge of information technology is a prerequisite for success.

  7. Trends over time in congenital malformations in live-born children conceived after assisted reproductive technology.

    Science.gov (United States)

    Henningsen, Anna-Karina A; Bergh, Christina; Skjaerven, Rolv; Tiitinen, Aila; Wennerholm, Ulla-Britt; Romundstad, Liv B; Gissler, Mika; Opdahl, Signe; Nyboe Andersen, Anders; Lidegaard, Øjvind; Forman, Julie L; Pinborg, Anja

    2018-03-23

    Children born after assisted reproductive technology, particularly singletons, have been shown to have an increased risk of congenital malformations compared with children born after spontaneous conception. We wished to study whether there has been a change in the past 20 years in the risk of major congenital malformations in children conceived after assisted reproductive technology compared with children spontaneously conceived. Population-based cohort study including 90 201 assisted reproductive technology children and 482 552 children spontaneously conceived, born in Denmark, Finland, Norway and Sweden. Both singletons and twins born after in vitro fertilization, intracytoplasmatic sperm injection and frozen embryo transfer were included. Data on children was taken from when the national Nordic assisted reproductive technology registries were established until 2007. Multiple logistic regression analyses were used to estimate the risks and adjusted odds ratios for congenital malformations in four time periods: 1988-1992, 1993-1997, 1998-2002 and 2003-2007. Only major malformations were included. The absolute risk for singletons of being born with a major malformation was 3.4% among assisted reproductive technology children vs. 2.9% among children spontaneously conceived during the study period. The relative risk of being born with a major congenital malformation between all assisted reproductive technology children and children spontaneously conceived remained similar through all four time periods (p = 0.39). However, we found that over time the number of children diagnosed with a major malformation increased in both groups across all four time periods. When comparing children conceived after assisted reproductive technology and spontaneously conceived, the relative risk of being born with a major congenital malformation did not change during the study period. © 2018 Nordic Federation of Societies of Obstetrics and Gynecology.

  8. "Learning to Assess" and "Assessing to Learn": The Construction of Knowledge about Assistive Technology

    Science.gov (United States)

    Folkes, Clare; Carmichael, Patrick

    2006-01-01

    A key role in the development and deployment of Assistive Technology solutions is that of the "assessor-consultant". Assessor-consultants for the UK-based charity Abilitynet work with clients to develop customized computer-based assistive technology systems and draw on a range of shared knowledge from the assessor-consultant community.…

  9. Using Assistive Technology in Teaching Children with Learning Disabilities in the 21st Century

    Science.gov (United States)

    Adebisi, Rufus Olanrewaju; Liman, Nalado Abubakar; Longpoe, Patricia Kwalzoom

    2015-01-01

    This paper was written to expose the meaning, benefits, and answer why the use of assistive technology for children with learning disabilities. The paper discussed the various types of assistive technology devices that were designed and used to solve written language, reading, listening, memory and mathematic problems of children with learning…

  10. CDC-reported assisted reproductive technology live-birth rates may mislead the public.

    Science.gov (United States)

    Kushnir, Vitaly A; Choi, Jennifer; Darmon, Sarah K; Albertini, David F; Barad, David H; Gleicher, Norbert

    2017-08-01

    The Centre for Disease Control and Prevention (CDC) publicly reports assisted reproductive technology live-birth rates (LBR) for each US fertility clinic under legal mandate. The 2014 CDC report excluded 35,406 of 184,527 (19.2%) autologous assisted reproductive technology cycles that involved embryo or oocyte banking from LBR calculations. This study calculated 2014 total clinic LBR for all patients utilizing autologous oocytes two ways: including all initiated assisted reproductive technology cycles or excluding banking cycles, as done by the CDC. The main limitation of this analysis is the CDC report did not differentiate between cycles involving long-term banking of embryos or oocytes for fertility preservation from cycles involving short-term embryo banking. Twenty-seven of 458 (6%) clinics reported over 40% of autologous cycles involved banking, collectively performing 12% of all US assisted reproductive technology cycles. LBR in these outlier clinics calculated by the CDC method, was higher than the other 94% of clinics (33.1% versus 31.1%). However, recalculated LBR including banking cycles in the outlier clinics was lower than the other 94% of clinics (15.5% versus 26.6%). LBR calculated by the two methods increasingly diverged based on proportion of banking cycles performed by each clinic reaching 4.5-fold, thereby, potentially misleading the public. Copyright © 2017 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

  11. Weatherization Innovation Pilot Program (WIPP): Technical Assistance Summary

    Energy Technology Data Exchange (ETDEWEB)

    Hollander, A.

    2014-09-01

    The U.S. Department of Energy (DOE) Energy Efficiency and Renewable Energy (EERE) Weatherization and Intergovernmental Programs Office (WIPO) launched the Weatherization Innovation Pilot Program (WIPP) to accelerate innovations in whole-house weatherization and advance DOE's goal of increasing the energy efficiency and health and safety of low-income residences without the utilization of additional taxpayer funding. Sixteen WIPP grantees were awarded a total of $30 million in Weatherization Assistance Program (WAP) funds in September 2010. These projects focused on: including nontraditional partners in weatherization service delivery; leveraging significant non-federal funding; and improving the effectiveness of low-income weatherization through the use of new materials, technologies, behavior-change models, and processes.

  12. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  13. Annual meeting on nuclear technology '92. Technical session 'Nuclear energy discussion'

    International Nuclear Information System (INIS)

    1992-05-01

    The report contains the six special papers red at the 1992 annual conference on nuclear engineering at Karlsruhe, all of which are individually retrievable from the database. They deal with the following subjects: historical development of the basic trends of technology criticism; communication problems in connection with the conveying of technical facts; psycho-sociological patterns of technology anxiety-mental infection or risk consciousness; field of tension between technology and journalism; handling of insecurities; ethical justifiability of nuclear energy use. (HSCH) [de

  14. Problems of technical cooperation

    International Nuclear Information System (INIS)

    Noramli, M.

    1987-01-01

    The main principles of the IAEA technical co-operation program, which intends to answer the requirements of the member states as regards technical assistance, are presented. IAEA offers its assistance in the supervision and financial support of the projects, which promise direct and quick profit to the member states. Projects related to the satisfaction of the main demands of humanity, industrial use, energy generation, radiation protection and other fields, which can promote the contribution of nuclear power generation to the course of peace, protection of health and thriving of states, are among them. 35 million dollars (USA) was allocated for the IAEA technical assistance and realization of the co-operation program in 1987

  15. Examination of studies on technology-assisted collaborative learning published between 2010-2014

    Directory of Open Access Journals (Sweden)

    Ahmet Arnavut

    2016-09-01

    Full Text Available Abstract This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education. Therefore, in this study it was aimed to examine how integration of collaborative learning into technology would contribute to education or it would contribute to education or not. According to the results of the studies obtained from Science Direct database, there are many research related with technology-assisted collaborative learning. However, since all of the studies did not fulfill our search criteria for content analysis, a total number of 58 articles published between the years of 2010 and 2014 were used in this study.

  16. Playing on strengths : technical innovations keep Canadian industry on top

    International Nuclear Information System (INIS)

    Harvie, W.

    1997-01-01

    The Western Canada Sedimentary Basin is one of Canada's major petroleum regions. Some fields in the region have been in production for 80 years. Since most of the major discoveries have been made, the challenge today is to use new technologies to find smaller reservoirs and to extract as much oil as possible from the depleting reserves. The following technical innovations were developed by Canadian companies for enhanced oil recovery: (1) steam assisted gravity drainage for heavy oil, (2) horizontal drilling, (3) coiled tube drilling, (4) single well steam assisted gravity drainage, (5) hydrocyclone technology in which briny water is sent down the borehole for reinjection and in which centrifugal force sends the lighter oil to the middle of the hydrocyclone where it is collected, and (6) portable top drives aimed at newer versions of large land drilling rigs and offshore operations. Multi-lateral techniques have also been used to increase production on heavy oil properties. These and other technical innovations are recognized as the single best advantage that Canadians have to offer the global marketplace. 4 figs

  17. Unlocking investment in cities: ELENA-EIB technical assistance facility

    International Nuclear Information System (INIS)

    Cicmanova, Jana; Garabetian, Thomas

    2015-06-01

    Energy Cities prepared a review of projects undertaken in the cities of Paris, Malmoe (in association with Lund and Helsingborg), Barcelona, Bristol and Brussels-Capital that received support from the ELENA-EIB facility. The aim of this study is to identify the ways in which technical assistance programs such as ELENA-EIB can help unlock investment in cities. The projects we reviewed (developed by Energy Cities' members) cover a wide array of sectors, from public building refurbishment to public transport or renewable energy production. These five projects illustrate how cities can focus on developing capacity in a long-term perspective, looking at the expected benefits of an investment or a support mechanism beyond that of the project itself. Overall, we found that project development assistance mechanisms such as ELENA can be beneficial to trigger investment for climate action in cities. Cities maximise the benefits of such a program by looking at how their climate-protection actions can generate benefits for the citizens, or how to systematically integrate climate action in other investment projects. Project development assistance (PDA) affects cities by allowing them to develop a new vision of the way they prepare an investment program. The search of synergies and the override of silo mentalities were a core element in the projects we reviewed. Indeed, the support provided by the European Union through ELENA-EIB is used by the local authorities to develop a transversal approach to climate action. The grant provided for PDA and the requirements of the ELENA-EIB facility represent an opportunity for local authorities to set up a new strategy regarding energy efficiency and renewable energy actions. It can be the necessary push for cities and local authorities to change the way they plan their investments, and develop projects to achieve their climate objectives. Besides, the grant is used for building long-term capacity in the development of investment programs

  18. Improving Vocabulary Skills through Assistive Technology: Rick's Story

    Science.gov (United States)

    Lindsey-Glenn, Pam F.; Gentry, James E.

    2008-01-01

    This case study examines the use of two assistive technologies, the Franklin Language Master 6000b and Microsoft PowerPoint 2003, as visual support systems to aid in the vocabulary acquisition skills of a student with autism spectrum disorder (ASD). The intervention used children's literature and best practices in teaching vocabulary skills in…

  19. Plasma technology: a technical economical and political challenge

    International Nuclear Information System (INIS)

    Abreu, V.A. de; Vicente, L.C.; Bender, O.W.; Sanches Junior, O.

    1987-01-01

    To survey the State of the Art and Technic in Material, Process and Products by Plasma, it was needed to assemble economic, political and managerial variables that will affect the absortion and implantation of this technology in Brazil. Through a survey in industries, universities, research centers, energy agencies and financial and forster institutions it was possible to build a frame that gave us conditions to forecasting and suggest some mesures to Plasma sector. (author) [pt

  20. Accuracy of self-reported survey data on assisted reproductive technology treatment parameters and reproductive history.

    Science.gov (United States)

    Stern, Judy E; McLain, Alexander C; Buck Louis, Germaine M; Luke, Barbara; Yeung, Edwina H

    2016-08-01

    It is unknown whether data obtained from maternal self-report for assisted reproductive technology treatment parameters and reproductive history are accurate for use in research studies. We evaluated the accuracy of self-reported in assisted reproductive technology treatment and reproductive history from the Upstate KIDS study in comparison with clinical data reported to the Society for Assisted Reproductive Technology Clinic Outcome Reporting System. Upstate KIDS maternal questionnaire data from deliveries between 2008 and 2010 were linked to data reported to Society for Assisted Reproductive Technology Clinic Outcome Reporting System. The 617 index deliveries were compared as to treatment type (frozen embryo transfer and donor egg or sperm) and use of intracytoplasmic sperm injection and assisted hatching. Use of injectable medications, self-report for assisted reproductive technology, or frozen embryo transfer prior to the index deliveries were also compared. We report agreement in which both sources had yes or both no and sensitivity of maternal report using Society for Assisted Reproductive Technology Clinic Outcome Reporting System as the gold standard. Significance was determined using χ(2) at P < 0.05. Universal agreement was not reached on any parameter but was best for treatment type of frozen embryo transfer (agreement, 96%; sensitivity, 93%) and use of donor eggs (agreement, 97%; sensitivity, 82%) or sperm (agreement, 98%; sensitivity, 82%). Use of intracytoplasmic sperm injection (agreement, 78%: sensitivity, 78%) and assisted hatching (agreement, 57%; sensitivity, 38%) agreed less well with self-reported use (P < .0001). In vitro fertilization (agreement, 82%) and frozen embryo transfer (agreement, 90%) prior to the index delivery were more consistently reported than was use of injectable medication (agreement, 76%) (P < .0001). Women accurately report in vitro fertilization treatment but are less accurate about procedures handled in the

  1. Exploring the Capability of Evaluating Technical Solutions: A Collaborative Study into the Primary Technology Classroom

    Science.gov (United States)

    Björkholm, Eva

    2014-01-01

    Within the field of technology education, evaluating technical solutions is considered as an important topic. Research indicates that pupils have difficulties in evaluating technical solutions in terms of fitness for purpose, i.e. how effective a technical solution supports its intended function. By using the learning study, which is an iterative…

  2. I've got a mobile phone too! Hard and soft assistive technology customization and supportive call centres for people with disability.

    Science.gov (United States)

    Darcy, Simon; Green, Jenny; Maxwell, Hazel

    2017-05-01

    The purpose of this article is to examine the use of a mobile technology platform, software customization and technical support services by people with disability. The disability experience is framed through the participants' use of the technology, their social participation. A qualitative and interpretive research design was employed using a three-stage process of observation and semi-structured interviews of people with disability, a significant other and their service provider. Transcripts were analyzed to examine the research questions through the theoretical framework of PHAATE - Policy, Human, Activity, Assistance and Technology and Environment. The analysis revealed three emergent themes: 1. Engagement and activity; 2. Training, support and customization; and 3. Enablers, barriers and attitudes. The findings indicate that for the majority of users, the mobile technology increased the participants' communication and social participation. However, this was not true for all members of the pilot with variations due to disability type, support needs and availability of support services. Most participants, significant others and service providers identified improvements in confidence, security, safety and independence of those involved. Yet, the actions and attitudes of some of the significant others and service providers acted as a constraint to the adoption of the technology. Implications for Rehabilitation Customized mobile technology can operate as assistive technology providing a distinct benefit in terms of promoting disability citizenship. Mobile technology used in conjunction with a supportive call centre can lead to improvements in confidence, safety and independence for people experiencing disability. Training and support are critical in increasing independent use of mobile technology for people with disability. The enjoyment, development of skills and empowerment gained through the use of mobile technology facilitate the social inclusion of people with

  3. 14 CFR 399.91 - Air carrier participation in programs of technical assistance to airlines of less developed...

    Science.gov (United States)

    2010-01-01

    ... performance at reasonable cost and within a reasonable period of time consistent with the ability of the... interfere with the primary business of the subsidized carrier which is to provide air transportation in the... effectiveness in a technical assistance program would not only divert the attention of top management from...

  4. Technical requirement of experiments and facilities for fusion nuclear technology

    International Nuclear Information System (INIS)

    Abdou, M.; Tillak, M.; Gierszwski, P.; Grover, J.; Puigh, R.; Sze, D.K.; Berwald, D.

    1986-06-01

    The technical issues and requirements of experiments and facilities for fusion nuclear technology (FNT) have been investigated. The nuclear subsystems addressed are: a) blanket, b) radiation shield, c) tritium processing system, and d) plasma interactive components. Emphasis has been placed on the important and complex development problems of the blanket. A technical planning process for FNT has been developed and applied, including four major elements: 1) characterization of issues, 2) quantification of testing requirements, 3) evaluation of facilities, and 4) development of a test plan to identify the role, timing, characteristics and costs of major experiments and facilities

  5. Assistive Technology Service Delivery in Rural School Districts

    Science.gov (United States)

    Ault, Melinda Jones; Bausch, Margaret E.; Mclaren, Elizabeth M.

    2013-01-01

    Little is known about the implementation of assistive technology (AT) services for students in rural areas. This study investigated the AT service delivery in 10 rural districts across six states. The results indicated that students use AT across functional areas, but considerably fewer number of devices than do those not living in rural areas. AT…

  6. [The Engineering and Technical Services Directorate at the Glenn Research Center

    Science.gov (United States)

    Moon, James

    2004-01-01

    My name is James Moon and I am a senior at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time s o h a r e applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community. In the 7000 Directorate I work directly in the 7611 organization. This organization is known as the Aviation Environments Technical Branch. My mentor is Vincent Satterwhite who is also the Branch Chief of the Aviation Environments Technical Branch. In this branch, I serve as the Assistant program manager of the Engineering Technology Program. The Engineering Technology Program (ETP) is one of three components of the High School L.E.R.C.I.P. This is an Agency-sponsored, eight-week research-based apprenticeship program designed to attract traditionally underrepresented high school students that demonstrate an aptitude for and interest in mathematics, science, engineering, and technology.

  7. Congenital anomalies after assisted reproductive technology

    DEFF Research Database (Denmark)

    Pinborg, Anja; Henningsen, Anna-Karina Aaris; Malchau, Sara Sofie

    2013-01-01

    Worldwide, more than 5 million children have been born after assisted reproductive technology (ART), and in many developed countries ART infants represent more than 1% of the birth cohorts. It is well known that ART children are at increased risk of congenital malformations even after adjustment...... for known confounders such as maternal age. The proportion of ART children is not negligible, and knowledge about the causes of the higher risk of congenital malformations is crucial to develop prevention strategies to reduce the future risk in ART children. The aim of this review is to summarize...

  8. Chemical Technology Division annual technical report, 1994

    International Nuclear Information System (INIS)

    1995-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1994 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion; (3) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from waste streams, concentrating radioactive waste streams with advanced evaporator technology, and producing 99 Mo from low-enriched uranium for medical applications; (6) electrometallurgical treatment of the many different types of spent nuclear fuel in storage at Department of Energy sites; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, and impurities in scrap copper and steel; and the geochemical processes involved in mineral/fluid interfaces and water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL)

  9. Chemical Technology Division, Annual technical report, 1991

    International Nuclear Information System (INIS)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL)

  10. Chemical Technology Division, Annual technical report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  11. Chemical Technology Division, Annual technical report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  12. Locating assistive technology research in a clinical setting: an occupational perspective.

    Science.gov (United States)

    Fowler-Davis, Sally; Evans, Laura; Cudd, Peter

    2015-01-01

    Peer research was used to identify the experience and perceptions of assistive technology and telecare adoption in a UK healthcare context. A narrative account of participation and learning is intended to provoke further dialogue. There have been a range of policy and implementation initiatives that are within the direct experience of organisational actors over the last 15 years and this engagement allows for specific reflection on the service achievements and some of the barriers to implementation of technology changes in rehabilitation practice and service design. Insights are presented that suggest a reification of research priorities and a need to align technology, through patient and public engagement, to provider priorities. In addition, an improvement in adoption would be based on sustained capacity building within the Occupational Therapy workforce and a re-focus on specific knowledge sharing and learning about technology. Given the shared desire to promote the sustained adoption of appropriate technology for assistance and rehabilitation it is suggested the voice of practitioners is strengthened through research and knowledge exchange in the clinical setting.

  13. The Agency's Technical Co-operation programme with Mexico, 1982-1992. Country programme summaries

    International Nuclear Information System (INIS)

    1992-01-01

    The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With almost $7.7 million of Agency support received, Mexico ranks 21st among all recipients of technical assistance during the period 1958 through 1991. The largest share of the assistance received during the past ten years has been in the form of expert services (36%), followed by equipment and training (27% each) and sub-contracts (10%). Almost two-thirds of the funds available were provided by the Technical Assistance and Co-operation Fund (65%), the rest was made available through extrabudgetary contributions (21%) and assistance in kind (14%). With regard to project disbursements during the past ten years, by sector the five major areas have been nuclear safety (34%), nuclear engineering and technology (27%), agriculture (17%), nuclear physics and chemistry (9%), and nuclear techniques in industry and hydrology (9%)

  14. Socio-technological imaginaries, assistive robotics and transformation of care

    DEFF Research Database (Denmark)

    Nickelsen, Niels Christian Mossfeldt

    The media and political/managerial levels focus on the opportunities to re-perform Denmark through digitization. Feeding assistive robotics (FAR) is a welfare technology, relevant to citizens with no function in their arms. Despite national dissemination strategies, it proves difficult to recruit...

  15. Socio-technological imaginaries, assistive robotics and transformation of care

    DEFF Research Database (Denmark)

    Nickelsen, Niels Christian Mossfeldt; Simonsen Abildgaard, Johan

    2018-01-01

    The media and political/managerial levels focus on the opportunities to re-perform Denmark through digitization. Feeding assistive robotics (FAR) is a welfare technology, relevant to citizens with no function in their arms. Despite national dissemination strategies, it proves difficult to recruit...

  16. Federal assistance program. Quarterly project progress report, January 1998--March 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the second quarter of FY-98-98 (January-March, 1998). It describes 268 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include requests for general information including maps and material for high school debates, and material on geothermal heat pumps, resource and well data, spacing heating and cooling, greenhouses, aquaculture, equipment, district heating, resorts and spas, industrial applications, electric power and snow melting. Research activities include work on model construction specifications for line shaft submersible pumps and plate heat exchangers and a comprehensive aquaculture developer package. The revised Geothermal Direct Use Engineering and Design Guidebooks was completed, published and is available for distribution. Outreach activities include the publication of the Quarterly Bulletin (Vol. 19, No. 1) which was devoted entirely to geothermal equipment, dissemination of information mainly through mailings of publications, tours of local geothermal uses, geothermal library acquisitions and use, participation in workshops, short courses and technical meetings by the staff, and progress monitor reports on geothermal activities.

  17. Teachers' Initial and Sustained Use of an Instructional Assistive Technology Tool: Exploring the Mitigating Factors

    Science.gov (United States)

    Bouck, Emily C.; Flanagan, Sara; Heutsche, Anne; Okolo, Cynthia M.; Englert, Carol Sue

    2011-01-01

    This qualitative research project explored factors that mitigated teachers implementing an instructional assistive technology and factors that mitigated its sustained use. Specifically, it explored these issues in relation to a social studies based instructional assistive technology (Virtual History Museum [VHM]), which was originally implemented…

  18. Assistive technology and passengers with special assistance needs in air transport: contributions to cabin design

    Directory of Open Access Journals (Sweden)

    Carina Campese

    2016-06-01

    Full Text Available Abstract There has been significant growth in air transport worldwide, as well as in Brazil. However, studies have emphasized that disabled, obese, and elderly passengers face difficulties when using this means of transport. Among these difficulties, issues related to passengers’ own assistive devices, including damage, loss, or the impossibility of using during the entire flight, stand out. Therefore, the present study aims to understand the trends in assistive technology focusing on cabin design. This research is based upon literature review, interviews with manufacturers and research centers, visits to specialized trade fairs, and patent search. The results revealed a great diversity of assistive products, its trends, and an increase in their use, which affect aircraft cabin design, especially in terms of space, access, and stowage of these devices.

  19. Assistive technology use is associated with reduced capability poverty: a cross-sectional study in Bangladesh.

    Science.gov (United States)

    Borg, Johan; Ostergren, Per-Olof; Larsson, Stig; Rahman, Asm Atiqur; Bari, Nazmul; Khan, Ahm Noman

    2012-03-01

    About half of all people with disabilities in developing countries live in extreme poverty. Focusing on the ends rather than the economic means of human development, the capability approach offers an alternative view of poverty. The purpose of this study was to explore the relation between assistive technology use and capability poverty in a low-income country. Self-reported data on food intake, health care, education, politics, self-determination, self-respect, family relationships and friendships were collected in Bangladesh through interviews of people with hearing impairments using and not using hearings aids, and people with ambulatory impairments using and not using manual wheelchairs (N = 583). Differences in outcomes between users and non-users of assistive technology were analyzed using logistic regression. Assistive technology users were more likely than non-users to report enhanced capabilities, hearing aid users to a larger extent than wheelchair users. Synergistic effects between assistive technology use and education were found. The use of assistive technology is predictive of reduced capability poverty in Bangladesh. Lack of wheelchair accessibility and the nature of selected outcomes may explain the limited association in the ambulatory group. Enhancing the effects of the other, there is support for providing education in combination with hearing aids. [Box: see text].

  20. Assistive Technology in Special Education and the Universal Design for Learning

    Science.gov (United States)

    Alnahdi, Ghaleb

    2014-01-01

    Using technology can help students with disabilities to enhance and improve their independence in academic and employment tasks, their participation in classroom discussions, along with helping them to accomplish some difficult academic tasks. This paper discusses the role and benefits of using assistive technology in the Universal Design for…

  1. Stakeholder views addressing the development and uptake of powered wheelchair assistive technology.

    Science.gov (United States)

    Gillham, Michael; Pepper, Matthew; Kelly, Steve; Howells, Gareth

    2017-12-14

    The objective of this research is to identify stakeholder views with regard to the development of effective powered wheelchair assistive technologies more suited to the user and carer needs, whilst also meeting the requirements for other stakeholders, such that developers can be better guided towards producing solutions which have a better chance of getting to the market place and hence to the end user. A questionnaire was designed to collect the views of all stakeholders and circulated to a statistically representative number of them. The question rating data were then checked for correlation between groups, and within groups, to establish validity. The 74 stakeholders across the eight classes who responded had a good correlation between each other, with a cross class "Pearson's correlation" ranging between 0.7 and 0.95, and the "Fleiss's Kappa reliability of agreement" within each class ranging between 0.07 and 0.36. This research has identified that all stakeholders should be involved in the development of the technology and that some may benefit in 'role-reversal' to help understand user problems and stakeholder concerns more clearly. Cost was a significant barrier to the uptake of appropriate technology, and training of users and carers was a major issue. Furthermore, development should not increase user isolation and the impact on the user must be monitored for 'quality of life'. Technical support and training should be given to the user and their carers, and equipment must be adaptive to meet the changing needs of the user. Implications for Rehabilitation Improved acceptance and use of technology by the user and their carers. Reduced rejection of appropriate provision. Improved mobility and interaction with others. Improved quality of life for users and carers.

  2. Computer-Assisted Foreign Language Teaching and Learning: Technological Advances

    Science.gov (United States)

    Zou, Bin; Xing, Minjie; Wang, Yuping; Sun, Mingyu; Xiang, Catherine H.

    2013-01-01

    Computer-Assisted Foreign Language Teaching and Learning: Technological Advances highlights new research and an original framework that brings together foreign language teaching, experiments and testing practices that utilize the most recent and widely used e-learning resources. This comprehensive collection of research will offer linguistic…

  3. 7 CFR 610.4 - Technical assistance furnished.

    Science.gov (United States)

    2010-01-01

    ... consultants who provide services such as engineering, planning, environmental assessment, tax assessment, and... of program assistance, planning assistance, application of conservation practices, and assistance in...) County and other local government units such as park authorities, departments of public works, planning...

  4. Technical aspects of portal technology application for e-health systems.

    Science.gov (United States)

    Kosińska, Joanna; Słowikowski, Paweł

    2004-01-01

    E-health is an emerging field on the intersection of medical information technologies, public health and business, referring to health services and information delivered or enhanced through the Internet and related technologies. Portal technology, allowing services to be accessible over the Internet is a perfect tool for providing e-health services. The use of portal technologies has had deep influence on the architecture of the whole e-health system, both regarding new subsystems and older ones which we want to integrate with the portal. Portals provide new possibilities for creating novel types of e-health applications as well. In this paper we provide a brief overview of e-health systems and portal technologies, and present many technical aspects of portal technology application for e-health systems such as the architecture of portal-based e-health systems, graphical user interfaces, access to various e-health systems' resources, personalization, security and privacy.

  5. Report on the US Program of Technical Assistance to Safeguards of the International Atomic Energy Agency (POTAS)

    International Nuclear Information System (INIS)

    1981-01-01

    This document summarizes the work done under the US Program of Technical Assistance to IAEA Safeguards (POTAS), providing the US Government, IAEA, and others with a short review of the progress made in the program since its inception. Becaue of the size and complexity of the program, only major accomplishments are presented. These are grouped under the following categories: (1) equipment and standard which cover assay of irradiated and unirradiated nuclear materials, automatic data processing, and physical standards; (2) experts who are involved in technology transfer, training, system design, and safeguard information processing and analysis; (3) system studies which cover diversion hazard analysis, safeguards approaches and application, and inspection effort planning and forecasting; (4) techniques, procedures, and equipment evaluation; (5) training of IAEA inspectors and safeguards specialists from member states. The major achievement has been the provisions of safeguards equipment designed to be reliable, and tamper resistant, some of which have already been in use in the field by inspector or by IAEA staff members in Vienna. These are listed in a table

  6. A conservation ontology and knowledge base to support delivery of technical assistance to agricultural producers in the united states

    Science.gov (United States)

    Information systems supporting the delivery of conservation technical assistance by the United States Department of Agriculture (USDA) to agricultural producers on working lands have become increasingly complex over the past 25 years. They are constrained by inconsistent coordination of domain knowl...

  7. Examination of Studies on Technology-Assisted Collaborative Learning Published between 2010-2014

    Science.gov (United States)

    Arnavut, Ahmet; Özdamli, Fezile

    2016-01-01

    This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education.…

  8. Human monitoring, smart health and assisted living techniques and technologies

    CERN Document Server

    Longhi, Sauro; Freddi, Alessandro

    2017-01-01

    This book covers the three main scientific and technological areas critical for improving people's quality of life - namely human monitoring, smart health and assisted living - from both the research and development points of view.

  9. Technical issues associated with in situ vitrification of the INEL Subsurface Disposal Area

    International Nuclear Information System (INIS)

    Stoots, C.M.; Bates, S.O.; Callow, R.A.; Campbell, K.A.; Farnsworth, R.K.; Krisman, G.K.; McKellar, M.G.; Nickelson, D.F.; Slater, C.E.

    1992-07-01

    In situ vitrification (ISV) has been identified as an alternative technology for remediation of the acid pit and transuranic pits and trenches (TRU-PTs) at the Idaho National Engineering Laboratory (INEL) Subsurface Disposal Area (SDA). However, a number of technical issues must be resolved before ISV can be considered applicable to these waste sites. To assist in the ISV technology evaluation, an ISV Steering Committee was formed to identify, prioritize, and develop closure roadmaps for technical issues lated with ISV application at the SDA. The activities of the ISV Steering Committee are summarized in a three-volume report. Volume I identifies the systematic approach used to identify and prioritize the ISV technical issues and briefly discusses the methodology that will be employed to resolve these issues. Volumes 2 and 3 discuss each technical issue in greater detail and suggest specific closure roadmaps to be used in resolving technical issues associated with ISV at the SDA Acid Pit and TRU-PTS, respectively. The three-volume report is a working document that will be updated as necessary to reflect current evaluation strategy for the ISV technology. This is Volume 3

  10. Basic Technology Competencies, Attitude towards Computer Assisted Education and Usage of Technologies in Turkish Lesson: A Correlation

    Science.gov (United States)

    Özdemir, Serpil

    2017-01-01

    The present research was done to determine the basic technology competency of Turkish teachers, their attitude towards computer-assisted education, and their technology operation level in Turkish lessons, and to designate the relationship between them. 85 Turkish teachers studying in public schools in Bartin participated in the research. The…

  11. Outcomes Of Assisted Reproductive Technologies At The Nairobi In ...

    African Journals Online (AJOL)

    Background: Infertility is a common problem affecting up to ten per cent of married couples. A systematic evaluation of aetiologic factors forms the basis for choice of treatment and future fertility. On the global perspective, Assisted Reproductive Technologies (ART) has become internationally recognised treatment option for ...

  12. Polymer Solidification Technology - Technical Issues and Challenges

    International Nuclear Information System (INIS)

    Jensen, Charles; Kim, Juyoul

    2010-01-01

    Many factors come into play, most of which are discovered and resolved only during full-scale solidification testing of each of the media commonly used in nuclear power plants. Each waste stream is unique, and must be addressed accordingly. This testing process is so difficult that Diversified's Vinyl Ester Styrene and Advanced Polymer Solidification are the only two approved processes in the United States today. This paper summarizes a few of the key obstacles that must be overcome to achieve a reliable, repeatable process for producing an approved Stable Class B and C waste form. Before other solidification and encapsulation technologies can be considered compliant with the requirements of a Stable waste form, the tests, calculations and reporting discussed above must be conducted for both the waste form and solidification process used to produce the waste form. Diversified's VERI TM and APS TM processes have gained acceptance in the UK. These processes have also been approved and gained acceptance in the U. S. because we have consistently overcome technical hurdles to produce a complaint product. Diversified Technologies processes are protected intellectual property. In specific instances, we have patents pending on key parts of our process technology

  13. Technical issues associated with in situ vitrification of the INEL Subsurface Disposal Area

    International Nuclear Information System (INIS)

    Stoots, C.M.; Bates, S.O.; Callow, R.A.; Campbell, K.A.; Farnsworth, R.K.; Gratson, G.K.; McKellar, M.G.; Nickelson, D.F.; Slater, C.E.

    1991-12-01

    In situ vitrification (ISV) has been identified as an alternative technology for remediation of the Acid Pit and Transuranic Pits and Trenches (TRU-PTs) that are present at the Idaho National Engineering Laboratory (INEL) Subsurface Disposal Area (SDA). However, a number of technical issues exist that must be resolved before ISV can be considered applicable to these waste sites. To assist in the ISV technology evaluation, an ISV Steering Committee was formed to identify, prioritize, and develop closure roadmaps for technical issues associated with ISV application at the INEL SDA. The activities of the ISV Steering Committee are summarized in three volumes of this report. This document, Volume 1, identifies the systematic approach used to identify and prioritize the ISV technical issues, and briefly discusses the methodology that will be employed to resolve these issues

  14. Assisted reproductive technology (ART) treatment in women with schizophrenia or related psychotic disorder

    DEFF Research Database (Denmark)

    Ebdrup, Ninna H; Assens, Maria; Hougaard, Charlotte O

    2014-01-01

    To determine the prevalence rate of women with a diagnosis of schizophrenia or related psychotic disorder in assisted reproductive technology (ART) treatment and to study these women's fertility treatment outcome in comparison to women with no psychotic disorders.......To determine the prevalence rate of women with a diagnosis of schizophrenia or related psychotic disorder in assisted reproductive technology (ART) treatment and to study these women's fertility treatment outcome in comparison to women with no psychotic disorders....

  15. Atoms for peace: Extending the benefits of nuclear technologies

    International Nuclear Information System (INIS)

    Qian, J.; Rogov, A.

    1995-01-01

    The article focuses on the projects co-operatively undertaken through IAEA mechanisms to extend the reach of beneficial nuclear technologies in response to increasing demands for technical support and assistance from its Member States

  16. FFCAct Clearinghouse, directory of abstracts: Radioactive waste technical support program. Revision 2

    International Nuclear Information System (INIS)

    1994-10-01

    The Federal Facility Compliance Act (FFCAct) Clearinghouse is a card catalog of information about the FFCAct and its requirements for developing Site Treatment Plans (STP). The information available in the clearinghouse includes abstracts describing computer applications, technical reports, and a list of technical experts. This report contains 61 abstracts from the database relating to radioactive waste management. The clearinghouse includes information on characterization, retrieval, treatment, storage, and disposal elements of waste management as they relate to the FFCAct and the treatment of mixed wastes. Subject areas of information being compiled include: commercial treatment capabilities; listings of technical experts for assistance in selecting and evaluating treatment options and technologies; mixed waste data and treatability groups; guidance on STP development; life-cycle costs planning estimates for facilities; references to documentation on available technologies and technology development activities; Waste Acceptance Criteria (WAC) for treatment facilities; regulatory, health and safety issues associated with treatment facilities and technologies; and computer databases, applications, and models for identifying and evaluating treatment facilities and technologies. Access to the FFCAct clearinghouse is available to the DOE and its DOE contractors involved in STP development and other FFCAct activities

  17. Final Scientific and Technical Report State and Regional Biomass Partnerships

    Energy Technology Data Exchange (ETDEWEB)

    Handley, Rick; Stubbs, Anne D.

    2008-12-29

    The Northeast Regional Biomass Program successfully employed a three pronged approach to build the regional capacity, networks, and reliable information needed to advance biomass and bioenergy technologies and markets. The approach included support for state-based, multi-agency biomass working groups; direct technical assistance to states and private developers; and extensive networking and partnership-building activities to share objective information and best practices.

  18. Arranging for personal assistance services and assistive technology at work. A report of the rehabilitation research and training center on personal assistance services.

    Science.gov (United States)

    Stoddard, Susan; Kraus, Lewis

    2006-01-01

    For an employee with a disability, reasonable accommodation can make the difference in finding work, maintaining employment, and succeeding on the job. Today, employers and employees alike are more aware that appropriate accommodation, including workplace personal assistance services (PAS) as well as assistive technology, improves an employee's ability to succeed. While assistive technology is in widespread use as an accommodation, workplace personal assistance is less understood. The goal of the study was to learn more about how workplace PAS and AT are arranged for in the workplace, and the issues that arise. Structured phone interviews were conducted with 20 workplace PAS users, 21 employers familiar with workplace PAS, and 19 employment organizations. Interview transcripts are the basis for the qualitative analysis of findings. Requirements for personal assistance accommodations focus on task-related needs. Personal care needs at work are not included in the Americans with Disabilities act but may be needed by the employee. Employers and PAS users have developed many creative ways to address PAS need. Organizations can construct an approach that fits the needs, abilities, and constraints of each organization. The interview respondents have identified a number of practices that are succeeding, including establishment of policies for arranging for PAS; centralization of accommodation budgets to remove work unit disincentives; and providing a shared personal assistant for interpreting or for task-related and personal care tasks. A number of important research questions remain. What is the extent of the need for PAS in the workplace? Will an expanded PAS supply increase the employment opportunities for people with disabilities? Will better models of workplace PAS be adopted by employers?

  19. Geothermal direct-heat utilization assistance. Quarterly project progress report, October--December 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report summarizes geothermal technical assistance, R and D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the first quarter of FY-98 (October--December 1997). It describes 216 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include requests for general information including maps and material for high school debates, and material on geothermal heat pumps, resource and well data, space heating and cooling, greenhouses, aquaculture, equipment, district heating, resorts and spas, industrial applications, electric power and snow melting. Research activities include work on model construction specifications of lineshaft submersible pumps and plate heat exchangers, a comprehensive aquaculture developer package and revisions to the Geothermal Direct Use Engineering and Design Guidebook. Outreach activities include the publication of the Quarterly Bulletin (Vol. 18, No. 4) which was devoted entirely to geothermal activities in South Dakota, dissemination of information mainly through mailings of publications, tours of local geothermal uses, geothermal library acquisition and use, participation in workshops, short courses and technical meetings by the staff, and progress monitor reports on geothermal activities.

  20. An update to inplace testing of safety/relief valves utilizing lift assist technology

    International Nuclear Information System (INIS)

    Heorman, K.R.

    1992-01-01

    Inplace testing of safety and relief valves with lift-assist devices has received mixed reviews from nuclear power plant testing personnel. While many plants use the technology, most limit its use to testing main steam safety valves (even though both OM-1-1981 and PTC 25.3-1976 allow its use for several different service applications). Test coordinator concerns regarding the technology range from lift set point accuracy and repeatability to the quality of the test result output. In addition, OM-1-1981 and PTC 25.3-1976 differ in their approach to the technology. The reasons for the differences between PTC 25.3-1976 and OM-1-1981 are discussed along with additional considerations applicable to the use of the technology in testing liquid service valves. This paper shows that lift assist technology is capable of determining lift set points within the accuracy requirements of OM-1 and PTC 25.3. It also demonstrates that the technology should not be limited to compressible service systems. Also, improvements in test repeatability and output quality are discussed as a function of the assist device design used and valve characteristics. Lift assist testing is often preferred over inplace testing that uses direct system pressure. It is often more cost efficient than bench testing because it does not require removal of critical systems from service and transportation of components. Also, duplicating system temperatures and other environmental factors is not an issue during inplace testing. Valve testing that once required an outage and maintenance period can now be conducted prior to such periods. This approach minimizes the possibility of failures becoming critical path limiting items

  1. Effective Assistive Technology Consideration and Implications for Diverse Students

    Science.gov (United States)

    Jones, Vita L.; Hinesmon-Matthews, Lezlee J.

    2014-01-01

    Often the consideration of assistive technology devices and services during the individualized education program (IEP) process is overlooked. Because the Individuals with Disabilities Education Act (IDEA) authorized this consideration, IEP team members must be keenly aware of the importance they hold in providing this valuable input. Thus, IEP…

  2. Chemical Technology Division annual technical report, 1985

    International Nuclear Information System (INIS)

    1986-04-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1985 are presented. In this period, CMT conducted research and development in areas that include the following: (1) advanced batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) advanced fuel cells with molten carbonate or solid oxide electrolytes; (3) corrosion-protective coatings for high-strength steel; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methodologies for recovery of energy from municipal waste; (6) nuclear technology related to waste management, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and proof of breeding in a light water breeder reactor; and (7) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL

  3. Chemical Technology Division annual technical report, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1994 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion; (3) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from waste streams, concentrating radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium for medical applications; (6) electrometallurgical treatment of the many different types of spent nuclear fuel in storage at Department of Energy sites; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, and impurities in scrap copper and steel; and the geochemical processes involved in mineral/fluid interfaces and water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  4. General design of a technical assistance program to help DOE/prime contractor buyers in doing business with small disadvantaged businesses

    Energy Technology Data Exchange (ETDEWEB)

    Wood, M.T.; Radford, L.R.; Saari, L.M.; Wright, J.

    1986-04-01

    This report offers a design and recommendations for implementing a program of education to assist Department of Energy buyers and procurement officers in increasing the quality and quantity of small disadvantaged business (DB) participation in their contracted work. The recommendations are based on a previous companion report, ''Issues in Contracting with Small Minority Businesses,'' from which technical assistance and related needs were derived. The assistance program is based on buyer and disadvantaged-business needs, as determined from synthesizing the results of interviews with over two dozen minority business leaders and procurement officers.

  5. IAEA's technical co-operation programme and its role in assisting member states in the safe utilisation of nuclear power

    International Nuclear Information System (INIS)

    Reed, J.

    2000-01-01

    In this contribution the author deals with the technical co-operation projects of the IAEA. The Agency's technical co-operation programme is a most welcome mechanism for the transfer of nuclear technology, and to developing countries it is certainly the most attractive side of the Agency, since it is through this programme that the IAEA can contribute to the solution of their problems through the provision of know-how, technology and training. (authors)

  6. United States: Ukraine Technical Exchange II trip report

    International Nuclear Information System (INIS)

    Moak, D.J.; Wendling, M.A.

    1995-02-01

    May 15--21, 1994, the first technical conference was held at Hanford between Ukraine-Chornobyl, Westinghouse Hanford, and SAIC, to exchange technical information and experience gained in cleanup and stabilization of radioactive contamination at Hanford and Chornobyl. Protocol was signed for a second exchange and technology demonstration program in Kiev and near Chornobyl power plants. Technical Exchange No. 2 was held from August 28--September 9, 1994, with 3 focus areas: field demonstration of DOE-Hanford technologies and application to cleanup of contaminated lands resulting from 1986 Chornobyl accident; application of other US DOE-technologies; and observation/evaluation of Ukraine-developed technologies for potential application in USA. Three radiological mapping systems were demonstrated near Chornobyl: man-carried Ultrasonic Ranging and Data System, a mobile radiological data system, and NOMAD field gamma spectroscopy system. The Ukraine-Chornobyl team hosted technical presentations, discussions and field trips for 4.5 days, providing insight on the Chornobyl problem and allowing the US team to present overviews on DOE technologies that may be applicable to the Chornobyl situation. It is concluded that Ukrainian scientists have tremendous talent and expended considerable energy in attempting to tackle such a problem, but economic and cultural conditions with Ukraine have prevented them from acquiring the resources to implement basic aspects of characterization and remediation activities. Most of their publications are in Russian only. Their translation, plus resources to carry out proposals for bench scale and field demonstration projects, could benefit the DOE complex and other nuclear programs. The considerable cultural and economic change occurring in Ukraine, is providing opportunities for private industries to assist in the changes and for DOE, others to apply cleanup technologies, and it is essential that close institutional relations be established

  7. Next Generation Nuclear Plant Project Technology Development Roadmaps: The Technical Path Forward

    Energy Technology Data Exchange (ETDEWEB)

    John Collins

    2009-01-01

    This document presents the Next Generation Nuclear Plant (NGNP) Systems, Subsystems, and Components, establishes a baseline for the current technology readiness status, and provides a path forward to achieve increasing levels of technical maturity.

  8. Evaluating Assistive Technology in Early Childhood Education: The Use of a Concurrent Time Series Probe Approach

    Science.gov (United States)

    Parette, Howard P.; Blum, Craig; Boeckmann, Nichole M.

    2009-01-01

    As assistive technology applications are increasingly implemented in early childhood settings for children who are at risk or who have disabilities, it is critical that teachers utilize observational approaches to determine whether targeted assistive technology-supported interventions make a difference in children's learning. One structured…

  9. Risk of hypertensive disorders in pregnancies following assisted reproductive technology

    DEFF Research Database (Denmark)

    Opdahl, S; Henningsen, A A; Tiitinen, A

    2015-01-01

    STUDY QUESTION: Is the risk of hypertensive disorders in pregnancies conceived following specific assisted reproductive technology (ART) procedures different from the risk in spontaneously conceived (SC) pregnancies? SUMMARY ANSWER: ART pregnancies had a higher risk of hypertensive disorders, in ...

  10. Assisted reproductive technology treatment in women with severe eating disorders

    DEFF Research Database (Denmark)

    Assens, Maria; Ebdrup, Ninna H; Pinborg, Anja

    2015-01-01

    INTRODUCTION: This national retrospective cohort study investigates the prevalence of women with severe eating disorders in assisted reproductive technology (ART) treatment compared with an age-matched background population without ART treatment. It assesses the frequency distribution of the firs...

  11. 59 MDW/Science and Technology Poster

    Science.gov (United States)

    2017-04-28

    the Air Force, and Science and Engineering community Employ innov1tlve technologies ind lj)prOIChH to sustain health, performance ind revolutionize...Medics Through Patient.Centered Care Our Goals Provide technic1I expertise and resources, project management assistance, direction, ind...SGYU SUBJECT: Professional Presentation Approval • ’ ...... -""""’ ~ 18 APR 20 17 1. Your paper, entitled 59 MDW/ Science & Technology Poster

  12. Enduring politics: the culture of obstacles in legislating for assisted reproduction technologies in Ireland

    Directory of Open Access Journals (Sweden)

    Jill Allison

    2016-12-01

    Full Text Available Assisted reproductive technology has become a normalized part of reproductive medicine in many countries around the world. Access, however, is uneven and inconsistent, facilitated and restricted by such factors as affordability, social and moral acceptance or refusal and local cultures of medical practice. In Ireland, assisted reproductive technology has been available since 1987 but remains unregulated by legislation. This creates an uncertain and untenable legal circumstance given the contested issues related to constitutional protection of the right to life of the unborn and the indeterminate legal status of embryos in vitro. This paper examines the impact of an enduring political impasse. It explores how clinical assisted reproductive technology services in Ireland operate both inside and outside dominant institutional frameworks, meeting a pronatalist and pro-family social and political agenda, while sometimes contradicting the pro-life politics that has continued to shape women’s reproductive lives. The medical approaches to infertility thus intersect with the ongoing debates around abortion, the failure of the government to regulate, and notions of embodied motherhood and responsibility within changing meanings of family and kinship. At the same time women and their partners seek assisted reproductive technology treatment in other countries throughout the European Union where laws differ and availability of services varies. A decade has passed since the Commission on Assisted Human Reproduction in Ireland released its recommendations; the enduring legislative vacuum leaves women, families and practitioners in potential legal limbo.

  13. Research and Technology, 1994

    Science.gov (United States)

    1995-01-01

    This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for the fiscal year 1994. It comprises approximately 200 short articles submitted by the staff members of the technical directorates. The report is organized into six major sections: Aeronautics, Aerospace Technology, Space Flight Systems, Engineering and Computational Support, Lewis Research Academy, and Technology Transfer. A table of contents and author index have been developed to assist the reader in finding articles of special interest. This report is not intended to be a comprehensive summary of all research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff members and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible.

  14. Correct coding for laboratory procedures during assisted reproductive technology cycles.

    Science.gov (United States)

    2016-04-01

    This document provides updated coding information for services related to assisted reproductive technology procedures. This document replaces the 2012 ASRM document of the same name. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  15. Psychosocial Factors Associated with the Use of Technological Assistance.

    Science.gov (United States)

    Scherer, Marcia J.

    This follow-up study was conducted to assess changes in functioning and adjustment over time of individuals with spinal cord injuries who had participated in 1986 and 1988 studies. The original studies interviewed five adult males with quadriplegia about the use of their assistive technologies and about how easily, comfortably, and effectively…

  16. Assistive Technology for Young Children: Creating Inclusive Learning Environments

    Science.gov (United States)

    Sadao, Kathleen C.; Robinson, Nancy B.

    2010-01-01

    Assistive technology (AT) can help young children with disabilities fully participate in natural, inclusive learning environments--but many early childhood professionals don't get the training they need to harness the power of AT. Fill that gap with this unintimidating, reader-friendly resource, the go-to guide to recommended AT practice for…

  17. Assisted reproductive technologies in South Dakota: the first ten years.

    Science.gov (United States)

    Brannian, John; Hansen, Keith

    2006-07-01

    One in six couples experience infertility. New assisted reproductive technologies such as in vitro fertilization (IVF) have helped thousands of couples worldwide to have a family. IVF has been available in South Dakota for the past ten years. Improvements in the clinic and laboratory have led to better live birth rates and lower incidences of multiple pregnancies. Advances in technology will help even more people overcome fertility problems in the near future.

  18. Preferences for technology versus human assistance and control over technology in the performance of kitchen and personal care tasks in baby boomers and older adults.

    Science.gov (United States)

    Beach, Scott R; Schulz, Richard; Matthews, Judith T; Courtney, Karen; Dabbs, Annette DeVito

    2014-11-01

    Quality of Life technology (QoLT) stresses humans and technology as mutually dependent and aware, working together to improve task performance and quality of life. This study examines preferences for technology versus human assistance and control in the context of QoLT. Data are from a nationally representative, cross-sectional web-based sample of 416 US baby boomers (45-64) and 114 older adults (65+) on preferences for technology versus human assistance and control in the performance of kitchen and personal care tasks. Multinomial logistic regression and ordinary least squares regression were used to determine predictors of these preferences. Respondents were generally accepting of technology assistance but wanted to maintain control over its' operation. Baby boomers were more likely to prefer technology than older adults, and those with fewer QoLT privacy concerns and who thought they were more likely to need future help were more likely to prefer technology over human assistance and more willing to relinquish control to technology. Results suggest the need for design of person- and context-aware QoLT systems that are responsive to user desires for level of control over operation of the technology. The predictors of these preferences suggest potentially receptive markets for the targeting of QoLT systems.

  19. Robot-assisted pyeloplasty for pelvi-ureteric junction obstruction of lower moiety in partial duplex system: A technical challenge

    Directory of Open Access Journals (Sweden)

    Girdhar S Bora

    2016-01-01

    Full Text Available Management of pelvi-ureteric junction obstruction (PUJO in a duplex system is technically challenging as dissection at the pelvis may jeopardize the vascularity of the normal moiety ureter. Anastomosing the pelvis to the one single ureter will have a risk of future development of stricture which then will risk both the moieties. Robotic assistance enables appropriate tissue dissection; minimal handling of normal ureter and precision in suturing, overcoming the potential challenges involved in the minimally invasive management of such complex cases. We report the feasibility and efficacy of robot-assisted laparoscopic pyeloplasty in such case.

  20. UMTRA technical assistance contractor Quality Assurance Program Plan

    International Nuclear Information System (INIS)

    Pehrson, P.

    1993-01-01

    This Quality Assurance Program Plan (QAPP) provides the primary requirements for the integration of quality functions into all Technical Assistance Contractor (TAC) Project organization activities. The QAPP is the written directive authorized by the TAC Program Manager to accomplish this task and to implement procedures that provide the controls and sound management practices needed to ensure TAC contractual obligations are met. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization functions are executed in a manner that will protect public health and safety, promote the success of the Project, and meet or exceed contract requirements. The key to ensuring compliance with this directive is a two-step professional approach: utilize the quality system in all areas of activity, and generate a personal commitment from all personnel to provide quality service. The quality staff will be experienced, trained professionals capable of providing maximum flexibility to Project goal attainment. Such flexibility will enable the staff to be more cost effective and to further improve communication and coordination. To provide control details, this QAPP will be supplemented by approved standard operating procedures that provide requirements for performing the various TAC quality-related activities. These procedures shall describe applicable design input and document control activities and documentation

  1. Technical issues associated with in situ vitrification of the INEL Subsurface Disposal Area

    International Nuclear Information System (INIS)

    Stoots, C.M.; Bates, S.O.; Callow, R.A.; Campbell, K.A.; Farnsworth, R.K.; Gratson, G.K.; McKellar, M.G.; Nickelson, D.F.; Slater, C.E.

    1992-01-01

    In situ vitrification (ISV) has been identified as an alternative technology for remediation of the Acid Pit and Transuranic Pits and Trenches (TRU-PTs) that are present at the Idaho National Engineering Laboratory (INEL) Subsurface Disposal Area (SDA). However, a number of technical issues exist that must be resolved before ISV can be considered applicable to these waste sites. To assist in the ISV technology evaluation, an ISV Steering Committee was formed to identify, prioritize, and develop closure roadmaps for technical issues associated with ISV application at the INEL SDA. The activities of the ISV Steering Committee are summarized in three volumes of this report. Volume 1 identifies the systematic approach used to identify and prioritize the ISV technical issues, and briefly discusses the methodology that will be employed to resolve these issues. This document Volume 2 and Volume 3 discusses each technical issue in greater detail and suggest specific closure roadmaps to be used in resolving technical issues associated with ISV at the SDA Acid Pit and TRU-PTs, respectively

  2. Research & Technology 2005

    Science.gov (United States)

    2006-01-01

    This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2005. It comprises 126 short articles submitted by the staff scientists and engineers. The report is organized into three major sections: Programs and Projects, Research and Technology, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information, visit Glenn's Web site at http://www.nasa.gov/glenn/. This document is available online (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov).

  3. The Agency's Technical Co-operation programme with Madagascar, 1982-1992. Country programme summaries

    International Nuclear Information System (INIS)

    1992-01-01

    The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $3.5 million of Agency support received, Madagascar ranks 42nd among all recipients of technical assistance in the period 1958 through 1991. More than half of the assistance during the past ten years has been provided in the form of equipment (55%), followed by expert services (32%) and training (13%). With a share of 69%, the Technical Assistance and Co-operation Fund has provided more than two-thirds of the total resources available, while 29% were made available through UNDP and 2% through assistance in kind. Extrabudgetary contributions accounted for less than one per cent. With regard to project disbursements during the past ten years, by sector, by far the largest area has been nuclear raw materials (66%), followed by nuclear physics and chemistry (18%). Only small shares have gone to nuclear safety (7%), agriculture (5%) and nuclear engineering and technology (4%)

  4. The Agency's Technical Co-operation programme with Cuba, 1982-1992. Country programme summaries

    International Nuclear Information System (INIS)

    1992-01-01

    The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With almost $8.2 million of Agency support received, Cuba ranks 19th among all recipients of technical assistance in the period 1958 - 1991, whereby it ranked as high as 3rd in 1982 and 4th in 1984. Over three quarters of the assistance during the past ten years has been provided in the form of equipment (81%), followed by expert services (10%) and training (9%). Seventy-one per cent of the resources were made available through the Technical Assistance and Co-operation Fund, while 28% of the resources were provided by UNDP. The remaining 1% was made available through extrabudgetary and in-kind contributions. With regard to project disbursements by sector, the largest areas have been general atomic energy development (36%), agriculture (20%), nuclear physics and chemistry (10%) and nuclear safety (10%). Industry and hydrology, nuclear engineering and technology, and nuclear medicine have each received less than ten per cent of the assistance provided

  5. The Agency's Technical Co-operation programme with Ghana, 1982-1992. Country programme summaries

    International Nuclear Information System (INIS)

    1992-01-01

    The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $6.5 million of Agency support received, Ghana ranks 29th among all recipients of technical assistance in the period 1958 - 1991. More than half of the assistance during the past ten years has been provided in the form of equipment (53%), followed by training through fellowships and scientific visits (34%) and expert services (13%). Seventy-four per cent of the resources were provided by the Technical Assistance and Co-operation Fund, 13% through assistance in kind, 11% through extrabudgetary contributions, and 2% by UNDP. It should be noted that the share for extrabudgetary contributions includes an amount of $250,000 made available by the Ghanaian Government for the purchase of equipment by the Agency under a funds-in-trust arrangement. With regard to project disbursement by sector, the largest share has gone to agriculture (36%), followed by nuclear physics and chemistry (21%), nuclear medicine (16%), industry and hydrology (14%) and nuclear engineering and technology (9%)

  6. Research and Technology 2000

    Science.gov (United States)

    2001-01-01

    This report selectively summarizes the NASA Glenn Research Center's research and technology accomplishments for the fiscal year 2000. It comprises 138 short articles submitted by staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology, a table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that was reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at NASA Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/WWW/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.gre.nasa.gov/GLTRS).

  7. Research and Technology 2002

    Science.gov (United States)

    Kim, Walter S.

    2003-01-01

    This report selectively summarizes NASA Glenn Research Center s research and technology accomplishments for fiscal year 2002. It comprises 166 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/WWW/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov/GLTRS/).

  8. Research and Technology 2001

    Science.gov (United States)

    2002-01-01

    This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2001. It comprises 156 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and, where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/www/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov/GLTRS).

  9. 75 FR 81832 - Technical Service Provider Assistance

    Science.gov (United States)

    2010-12-29

    ... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service 7 CFR Part 652 Technical Service... as of Jan. 1, 2010, on page 565, in Sec. 652.2, the first definition for ``Technical service'' is removed. [FR Doc. 2010-32945 Filed 12-28-10; 8:45 am] BILLING CODE 1505-01-D ...

  10. Teaching for Application: A Model for Assisting Pre-Service Teachers with Technology Integration

    Science.gov (United States)

    Hur, Jung Won; Cullen, Theresa; Brush, Thomas

    2010-01-01

    The purpose of this paper is to introduce a technology integration model designed to assist pre-service teachers to learn meaningful uses of technology in K-12 classrooms. Based on studies in teacher education, learning theory, and technology integration, the authors define five essential characteristics necessary for pre-service teacher…

  11. Technology of perfection to technical tactical preparedness of skilled footballers in microcycles of competition period.

    Directory of Open Access Journals (Sweden)

    Doroshenko E.Y.

    2012-04-01

    Full Text Available Technology of perfection to technical tactical to preparedness of skilled footballers in the microcycles of preparation of competition process is considered. It is shown that for development of this technology key positions of general theory of preparation of sportsmen are used in Olympic and professional sport and technical tactical actions of players taking into account the internal and external parameters of the physical loading. Information of training process of footballers of youth composition of command «Metallurgist» (Zaporozhia is utillized in research. It is analysed and generalized information of complex scientific group. The program of perfection of technical and tactical preparedness is developed. It is set that the use of this program will allow to optimize individual, group and command technical tactical preparedness of skilled footballers on the basis of account of parameters of playing actions and factors, детерминирующих a physical capacity.

  12. The Role of Assistive Technology in Self-Perceived Participation

    Science.gov (United States)

    Ripat, Jacquie D.; Woodgate, Roberta L.

    2012-01-01

    The aim of this study was to develop an understanding of how assistive technology (AT) contributes to self-perceived participation for individuals with spinal cord injuries and to propose a revised definition of AT in light of the findings. A grounded theory study of 19 adults with spinal cord injuries was conducted. Participants engaged in…

  13. Feedback in Computer Assisted Pronunciation Training: When technology meets pedagogy

    NARCIS (Netherlands)

    Neri, A.; Cucchiarini, C.; Strik, H.

    2002-01-01

    Computer Assisted Language Learning (CALL) has now established itself as a prolific and fast growing area whose advantages are already well-known to educators. Yet, many authors lament the lack of a reliable integrated conceptual framework linking technology advances and second language acquisition

  14. Role of technical reports as a means of scientific information distribution in the field of nuclear science and technology

    International Nuclear Information System (INIS)

    Ishikawa, Masashi

    2013-06-01

    Japan Atomic Energy Agency (JAEA) has published more than twenty-thousand technical reports on the internet to provide detailed results of research and development activities. In JAEA technical reports, detailed results, experimental data, findings etc. are recorded. Technical report is effective for communication among scientists and engineers for research development in a big science like nuclear research. The number of downloads of JAEA technical reports is over 4.7 million per a year. Technical reports have many advantages for carrying research results of big projects than journal articles. It is also useful for knowledge management to transfer research results and achievements to the following generation. To improve JAEA technical reports to meet the needs of scientists and engineers and assisting the knowledge management is proposed. (author)

  15. Chemical Technology Division annual technical report, 1988

    International Nuclear Information System (INIS)

    1989-05-01

    Highlights of the Chemical Technology (CMT) Divisions's activities during 1988 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries (mainly lithium-alloy/metal sulfide, sodium/metal chloride, and sodium/sulfur); (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for recovery of energy from municipal waste and techniques for treatment of hazardous chemical water; (6) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing /sup 99/Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (7) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 53 figs., 16 tabs

  16. DESIGNING AND BUILDING EXERCISE MODEL OF TECHNICAL ENGLISH VOCABULARIES USING CALL (COMPUTER ASSISTED LANGUAGE LEARNING

    Directory of Open Access Journals (Sweden)

    Yogi Widiawati

    2017-11-01

    Full Text Available The research is aimed to assist and facilitate the students of Electrical and Electronics Department of Politeknik Negeri Jakarta (State Polytechnics of Jakarta, Indonesia, in learning technical English vocabulary. As technical students, they study ESP (English for Specific Purposes and they find some obstacles in memorizing technical vocabularies which are very important in order to read and understand manual books for laboratory and workshop. Some English technical vocabularies among others are “generate”, “pile”, “bench”, et cetera. The research outcome is software which will be beneficial for technical students, especially electrical and electronics students. This software can be used to practice their vocabulary skills, so they will be more skillful and knowledgeable. This software is designed by using the program of Rapid E-Learning Suite Version 5.2 and Flash CS3. The software practice contains some exercises on reading text and reading comprehension questions and presented with the multiple answers. This software is handy and flexible because students can bring it anywhere and be studied anytime. It is handy because this software is put and saved in CD (compact disc, so the students can take it with them anywhere and anytime they want to learn. In other words, they have flexibility to learn and practice English Technical Vocabularies. As a result, the students are found one of the ways to overcome their problems of memorizing vocabularies. The product is a kind of software which is easily used and portable so that the students can use the software anywhere and anytime. It consists of 3 (three sections of exercises. At the end of each exercise, the students are evaluated automatically by looking at the scoring system. These will encourage them to get good score by repeating it again and again. So the technical words are not problem for them. Furthermore, the students can practice technical English vocabulary both at home and

  17. Blurring the Lines: Leveraging Internet Technology for Successful Blending of Secondary/Post-Secondary Technical Education

    Science.gov (United States)

    Ryan, Kenneth; Kopischke, Kevin

    2008-01-01

    The Remote Automation Management Platform (RAMP) is a real-time, interactive teaching tool which leverages common off-the-shelf internet technologies to provide high school learners extraordinary access to advanced technical education opportunities. This outreach paradigm is applicable to a broad range of advanced technical skills from automation…

  18. Technology-assisted Interventions for Parents of Young Children: Emerging Practices, Current Research, and Future Directions.

    Science.gov (United States)

    Hall, Cristin M; Bierman, Karen L

    Technology can potentially expand the reach and cut the costs of providing effective, evidence-based interventions. This paper reviews existing publications that describe the application and evaluation of technology-assisted interventions for parents of young children. A broad review of the early childhood literature revealed 48 studies describing technology-assisted parent education and interventions. Across these studies, multiple forms of technology were used, including web-based platforms, discussion forums, mobile devices, and video conferencing. Results are described moving from feasibility and acceptability of technology-based delivery systems to more rigorous evaluations examining their impact on parent and child outcomes. Potential exists for technology to deliver interventions to parents. Limitations are discussed including differential acceptability and elevated attrition associated with internet-only intervention delivery.

  19. Technical, environmental, and economic assessment of deploying advanced coal power technologies in the Chinese context

    International Nuclear Information System (INIS)

    Zhao Lifeng; Xiao Yunhan; Gallagher, Kelly Sims; Wang Bo; Xu Xiang

    2008-01-01

    The goal of this study is to evaluate the technical, environmental, and economic dimensions of deploying advanced coal-fired power technologies in China. In particular, we estimate the differences in capital cost and overall cost of electricity (COE) for a variety of advanced coal-power technologies based on the technological and economic levels in 2006 in China. This paper explores the economic gaps between Integrated Gasification Combined Cycle (IGCC) and other advanced coal power technologies, and compares 12 different power plant configurations using advanced coal power technologies. Super critical (SC) and ultra super critical (USC) pulverized coal (PC) power generation technologies coupled with pollution control technologies can meet the emission requirements. These technologies are highly efficient, technically mature, and cost-effective. From the point of view of efficiency, SC and USC units are good choices for power industry. The net plant efficiency for IGCC has reached 45%, and it has the best environmental performance overall. The cost of IGCC is much higher, however, than that of other power generation technologies, so the development of IGCC is slow throughout the world. Incentive policies are needed if IGCC is to be deployed in China

  20. Provision of assistive technology services method (ATSM) according to evidence-based information and knowledge management.

    Science.gov (United States)

    Elsaesser, Linda-Jeanne; Bauer, Stephen M

    2011-01-01

    PURPOSE. This article develops a standardised method for assistive technology service (ATS) provision and a logical basis for research to improve health care quality. The method is 'interoperable' across disabilities, disciplines, assistive technology devices and ATSs. BACKGROUND. Absence of a standardised and interoperable method for ATS provision results in ineffective communication between providers, manufacturers, researchers, policy-makers and individuals with disabilities (IWD), a fragmented service delivery system, inefficient resource allocation and sub-optimal outcomes. OBJECTIVES. Synthesise a standardised, interoperable AT service method (ATSM) fully consistent with key guidelines, systems, models and Federal legislation. Express the ATSM using common and unambiguous language. RESULTS. Guidelines, systems, models and Federal legislation relevant to ATS provision are reviewed. These include the RESNA Guidelines for Knowledge and Skills for Provision of Assistive Technology Products and Services (RESNA Guidelines), IMPACT2 model, international classification of functioning, disability and health (ICF) and AT device classification (ATDC). Federal legislation includes the Assistive Technology Act of 2004, Americans with Disabilities Act of 2008 and Social Security Act. Based on these findings, the ATSM is synthesised and translated into common and accessible language. CONCLUSION. ATSM usage will improve communication between stakeholders, service delivery coherence, resource allocation and intervention outcomes.

  1. Cross-cultural adaptation of the assistive technology device - Predisposition assessment (ATD PA) for use in Brazil (ATD PA Br).

    Science.gov (United States)

    Alves, Ana Cristina de Jesus; Matsukura, Thelma Simões; Scherer, Marcia J

    2017-02-01

    The purpose of this study is to conduct a cross-cultural adaptation of the Assistive Technology Device Predisposition Assessment (ATD PA) for use in Brazil. The selection of the Assistive Technology Device Predisposition Assessment (ATD PA) was determined by previous literature reviews of articles published in 2014 and 2016 in six databases with the terms "assistive device" or "assistive technology" or "self-help device" combined with "evidence-based practice" or "framework" or "measurement scale" or "model and outcome assessment". This review indicated that the conceptual model of Assistive Technology (AT) most discussed in the literature was the Matching Person and Technology (MPT) model, and this finding determined the selection of ATD PA as an assessment within the MPT portfolio of measures. The procedures for cross-cultural adaptation were as follows: Equivalence of Concept, Semantic and Operational. Five experts were asked to translate 725 items and these translations were evaluated and a high level of agreement was demonstrated. The Portuguese version, Avaliação de Tecnologia Assistiva - Predisposição ao Uso - ATD PA Br, was derived from the original version in English (ATD PA). The ATD PA Br will support professionals and people with disabilities in Brazil to better select AT devices according to the clients' needs. Implications for rehabilitation Provides a systematic way of selecting assistive technology devices for the use of individuals with disabilities according to the Brazilian reality. A systematic way of selecting the assistive technology that can help decrease the abandonment of the assistive technology use. The use of the Matching Person and Technology theorical model and of the assessment ATD PA Br is essential to guide the researches and clinical practice in Brazil.

  2. Convergence of anatomy, technology, and therapeutics: a review of laser-assisted drug delivers.

    Science.gov (United States)

    Brauer, Jeremy A; Krakowski, Andrew C; Bloom, Bradley S; Nguyen, Tuyet A; Geronemus, Roy G

    2014-12-01

    This is a very exciting time in cutaneous laser surgery with an ever-expanding therapeutic armamentarium and an increased sophistication of available technology. These recent trends have allowed for both a rapid development of interest and exploration of laser-assisted drug delivery and its potential applications. We review the current literature on anatomy, technology, and therapeutics as it relates to laser-assisted drug delivery. The focus of our review is on two areas of interest that have received much attention to date - photodynamic therapy in the treatment of actinic keratoses and nonmelanoma skin cancers as well as the treatment of scarring. We will also discuss potential complications of existing modalities used independently and in laser-assisted drug delivery and conclude with future indications for this burgeoning therapeutic methodology.

  3. Assistive technologies along supply chains in health care and in the social services sector.

    Science.gov (United States)

    Mayer, Peter; Hauer, Katharina; Schloffer, Evelyn; Leyrer, Barbara

    2015-01-01

    Health care systems in Austria and Slovenia are currently facing challenges due to scarce resources and demographic change which can be seen especially along the supply chains. The main objective of this paper is to present an option to improve the use of assistive technologies. An extensive literature research for the theoretic part as well as a qualitative survey for the empiric part focusing on short-term care were carried out. Results show that there is a lack of information and training on assistive technologies. As a consequence, their full potential cannot be exploited. Therefore a guideline for nursing consultations was developed. To conclude, both the literature research and the qualitative survey show that assistive technologies have high potentials to improve the supply chains in the health care and social services sector, but there is a lot of information and training on them needed.

  4. National Institute of Justice Center Requirements Definition, Technical Assistance, Agile Test and Evaluation and Cyber Science Analysis

    National Research Council Canada - National Science Library

    Frantz, Frederick

    2003-01-01

    This task provided for assembly, definition, and completion of technical enhancements in coordination with the National Law Enforcement and Corrections Technology Center -Northeast Region (NLECTC-NE...

  5. Control and diagnostics of technical state of main electro technical and thermal equipment of NPP, TPS and HPS on the basis of thermovision technologies

    International Nuclear Information System (INIS)

    Banduryan, B.B.; Fedorenko, G.M.; Ostapchuk, L.B.; Saratov, V.O.

    2006-01-01

    The opportunity of using of thermovision technologies for detection of defects NPP, TPS and HPS electro technical and power equipment is shown. The results of thermovision monitoring of a turbine generator stator technical state are represented. The method for thermovision control of a technical state of a electrical machines and apparatus construction elements, for which the patent of Ukraine have been obtained, is described. he verification of the offered expedient thermovision control and diagnostics at 'Elektrovazhmash' factory was carried out

  6. Ethics of emergent information and communication technology applications in humanitarian medical assistance.

    Science.gov (United States)

    Hunt, Matthew; Pringle, John; Christen, Markus; Eckenwiler, Lisa; Schwartz, Lisa; Davé, Anushree

    2016-07-01

    New applications of information and communication technology (ICT) are shaping the way we understand and provide humanitarian medical assistance in situations of disaster, disease outbreak or conflict. Each new crisis appears to be accompanied by advancements in humanitarian technology, leading to significant improvements in the humanitarian aid sector. However, ICTs raise ethical questions that warrant attention. Focusing on the context of humanitarian medical assistance, we review key domains of ICT innovation. We then discuss ethical challenges and uncertainties associated with the development and application of new ICTs in humanitarian medical assistance, including avoiding harm, ensuring privacy and security, responding to inequalities, demonstrating respect, protecting relationships, and addressing expectations. In doing so, we emphasize the centrality of ethics in humanitarian ICT design, application and evaluation. © The Author 2016. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  7. Technical attributes, health attribute, consumer attributes and their roles in adoption intention of healthcare wearable technology.

    Science.gov (United States)

    Zhang, Min; Luo, Meifen; Nie, Rui; Zhang, Yan

    2017-12-01

    This paper aims to explore factors influencing the healthcare wearable technology adoption intention from perspectives of technical attributes (perceived convenience, perceived irreplaceability, perceived credibility and perceived usefulness), health attribute (health belief) and consumer attributes (consumer innovativeness, conspicuous consumption, informational reference group influence and gender difference). By integrating technology acceptance model, health belief model, snob effect and conformity and reference group theory, hypotheses and research model are proposed. The empirical investigation (N=436) collects research data through questionnaire. Results show that the adoption intention of healthcare wearable technology is influenced by technical attributes, health attribute and consumer attributes simultaneously. For technical attributes, perceived convenience and perceived credibility both positively affect perceived usefulness, and perceived usefulness influences adoption intention. The relation between perceived irreplaceability and perceived usefulness is only supported by males. For health attribute, health belief affects perceived usefulness for females. For consumer attributes, conspicuous consumption and informational reference group influence can significantly moderate the relation between perceived usefulness and adoption intention and the relation between consumer innovativeness and adoption intention respectively. What's more, consumer innovativeness significantly affects adoption intention for males. This paper aims to discuss technical attributes, health attribute and consumer attributes and their roles in the adoption intention of healthcare wearable technology. Findings may provide enlightenment to differentiate product developing and marketing strategies and provide some implications for clinical medicine. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Driver trust in five driver assistance technologies following real-world use in four production vehicles.

    Science.gov (United States)

    Kidd, David G; Cicchino, Jessica B; Reagan, Ian J; Kerfoot, Laura B

    2017-05-29

    Information about drivers' experiences with driver assistance technologies in real driving conditions is sparse. This study characterized driver interactions with forward collision warning, adaptive cruise control, active lane keeping, side-view assist, and lane departure warning systems following real-world use. Fifty-four Insurance Institute for Highway Safety employees participated and drove a 2016 Toyota Prius, 2016 Honda Civic, 2017 Audi Q7, or 2016 Infiniti QX60 for up to several weeks. Participants reported mileage and warnings from the technologies in an online daily-use survey. Participants reported their level of agreement with five statements regarding trust in an online post-use survey. Responses were averaged to create a composite measure of trust ranging from -2 (strongly disagree) to +2 (strongly agree) for each technology. Mixed-effect regression models were constructed to compare trust among technologies and separately among the study vehicles. Participants' free-response answers about what they liked least about each system were coded and examined. Participants reported driving 33,584 miles during 4 months of data collection. At least one forward collision warning was reported in 26% of the 354 daily reports. The proportion of daily reports indicating a forward collision warning was much larger for the Honda (70%) than for the Audi (18%), Infiniti (15%), and Toyota (10%). Trust was highest for side-view assist (0.98) and lowest for active lane keeping (0.20). Trust in side-view assist was significantly higher than trust in active lane keeping and lane departure warning (0.53). Trust in active lane keeping was significantly lower than trust in adaptive cruise control (0.67) and forward collision warning (0.71). Trust in adaptive cruise control was higher for the Audi (0.72) and Toyota (0.75) compared with the Honda (0.30), and significantly higher for the Infiniti (0.93). Trust in Infiniti's side-view assist (0.58) was significantly lower than

  9. Does assistive technology contribute to social inclusion for people with intellectual disability? A systematic review protocol.

    Science.gov (United States)

    Owuor, John; Larkan, Fiona; Kayabu, Bonnix; Fitzgerald, Geraldine; Sheaf, Greg; Dinsmore, John; McConkey, Roy; Clarke, Mike; MacLachlan, Malcolm

    2018-02-10

    The aim of this review is to answer the following question: Does assistive technology contribute to social inclusion for people with intellectual disability? Previous research on assistive technology has focused on socioeconomic impacts such as education, employment and access to healthcare by people with intellectual disability. There is a need to consolidate evidence on the interaction between intellectual disability, assistive technology, community living and social inclusion. The review will consider studies from all settings: geographical, socioeconomic and care (institutional and community care), published in English. Studies reported in other languages with abstracts in English will be included if they can be translated using Google Translate, otherwise such studies will be included in the appendix. The review will include both qualitative and quantitative studies. The intervention in this review refers to the use of assistive technology to promote community participation or interpersonal relationships (social inclusion) for people with intellectual disability. The outcomes will be behavioural and social benefits of using assistive technology by people with intellectual disability. Enhanced interpersonal relationships and community participation by people with intellectual disability. Data analysis will be in two phases. The first phase will involve analysis of individual study designs separately. The second phase will be narrative/thematic synthesis of all study groups. The review will not create any ethical or safety concerns. At least one peer-reviewed article in a leading journal such as the BMJ is planned. The findings will also be disseminated through a seminar session involving internal audience at Trinity College Dublin and within the Assistive Technologies for people with Intellectual Disability and Autism research programme. CRD42017065447; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article

  10. Handling the Misalignment of Interests in Assisted Reproductive Technology Practices

    OpenAIRE

    Pierson, Anne

    2010-01-01

    One of the major problems we see in the use of reproductive technology at this time is that there is very little regulation of embryo transfer practices that lead to multigestational pregnancies. While the FDA must approve assisted reproductive technology (ART) devices and drugs that stimulate ovulation, it has no jurisdiction over the practice of medicine, how these drugs and devices are used on the ground, often in off-label procedures. The only current regulation of these practices is at...

  11. Examining the Role of Transformational Leadership in Technology Adoption: Evidence from Bruneian Technical & Vocational Establishments (TVE)

    Science.gov (United States)

    Seyal, Afzaal H.

    2015-01-01

    This pioneering study discusses the thirty-five Bruneian technical & vocational institutions of top management (principals, deputy principals, senior masters, ICT coordinators and technical administrators) leadership style with the adoption of Information and Communication Technologies (ICT). The study uses a survey approach further to…

  12. Technical and Economic Assessment of Storage Technologies for Power-Supply Grids

    Directory of Open Access Journals (Sweden)

    H. Meiwes

    2009-01-01

    Full Text Available Fluctuating power generation from renewable energies such as wind and photovoltaic are a technical challenge for grid stability. Storage systems are an option to stabilise the grid and to maximise the utilisation factors of renewable power generators. This paper analyses the state of the art of storage technologies, including a detailed life cycle cost comparison. Beside this, benefits of using storage systems in electric vehicles are analysed and quantified. A comprehensive overview of storage technologies as well as possible applications and business cases for storage systems is presented. 

  13. Chemical technology division: Annual technical report 1987

    International Nuclear Information System (INIS)

    1988-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1987 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries--mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for the electromagnetic continuous casting of steel sheet and for the purification of ferrous scrap; (6) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (7) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; the thermochemistry of various minerals; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 54 figs., 9 tabs

  14. Chemical technology division: Annual technical report 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1987 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries--mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for the electromagnetic continuous casting of steel sheet and for the purification of ferrous scrap; (6) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (7) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; the thermochemistry of various minerals; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 54 figs., 9 tabs.

  15. Chemical Technology Division annual technical report, 1986

    International Nuclear Information System (INIS)

    1987-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1986 are presented. In this period, CMT conducted research and development in areas that include the following: (1) high-performance batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants, the technology for fluidized-bed combustion, and a novel concept for CO 2 recovery from fossil fuel combustion; (5) methods for recovery of energy from municipal waste; (6) methods for the electromagnetic continuous casting of steel sheet; (7) techniques for treatment of hazardous waste such as reactive metals and trichloroethylenes; (8) nuclear technology related to waste management, a process for separating and recovering transuranic elements from nuclear waste, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (9) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 127 refs., 71 figs., 8 tabs

  16. A Follow-up Study of a Successful Assistive Technology for Children with ADHD and Their Families

    DEFF Research Database (Denmark)

    Sonne, Tobias; Marshall, Paul; Müller, Jörg

    2016-01-01

    in the first phase of the study, continued even after the study period, when the technology was no longer available. We furthermore present insights into family practices in families of children with ADHD and how these could lead to unexpected challenges and implications related to the adoption, use......Little research on assistive technologies for families of children with attention deficit hyperactivity disorder (ADHD) has investigated the long-term impact, after the assistive technology is returned to the researchers. In this paper, we report the outcomes of a follow-up study, conducted four......-weeks after a field study of 13 children with ADHD and their families who used an assistive technology designed to help establish and change family practices. We show that some of the positive effects on parent frustration level and conflict level around morning and bedtime routines that we observed...

  17. Parents of Autistic Children and Their Experiences with Assistive Technology

    Science.gov (United States)

    Curran, David

    2017-01-01

    Assistive Technology (AT) has become an important tool used by special needs children for improving their quality of life by empowering their abilities, therefore improving their personal independence. The purpose of this Interpretative Phenomenological Analysis (IPA) study was to closely examine the experiences and meaning-making of parents, of…

  18. The future of the provision process for mobility assistive technology: a survey of providers.

    Science.gov (United States)

    Dicianno, Brad E; Joseph, James; Eckstein, Stacy; Zigler, Christina K; Quinby, Eleanor J; Schmeler, Mark R; Schein, Richard M; Pearlman, Jon; Cooper, Rory A

    2018-03-20

    The purpose of this study was to evaluate the opinions of providers of mobility assistive technologies to help inform a research agenda and set priorities. This survey study was anonymous and gathered opinions of individuals who participate in the process to provide wheelchairs and other assistive technologies to clients. Participants were asked to rank the importance of developing various technologies and rank items against each other in terms of order of importance. Participants were also asked to respond to several open-ended questions or statements. A total of 161 providers from 35 states within the USA consented to participation and completed the survey. This survey revealed themes of advanced wheelchair design, assistive robotics and intelligent systems, human machine interfaces and smart device applications. It also outlined priorities for researchers to provide continuing education to clients and providers. These themes will be used to develop research and development priorities. Implications for Rehabilitation • Research in advanced wheelchair design is needed to facilitate travel and environmental access with wheelchairs and to develop alternative power sources for wheelchairs.• New assistive robotics and intelligent systems are needed to help wheelchairs overcome obstacles or self-adjust, assist wheelchair navigation in the community, assist caregivers and transfers, and aid ambulation.• Innovations in human machine interfaces may help advance the control of mobility devices and robots with the brain, eye movements, facial gesture recognition or other systems.• Development of new smart devices is needed for better control of the environment, monitoring activity and promoting healthy behaviours.

  19. Aviation Trends Related to Atmospheric Environment Safety Technologies Project Technical Challenges

    Science.gov (United States)

    Reveley, Mary S.; Withrow, Colleen A.; Barr, Lawrence C.; Evans, Joni K.; Leone, Karen M.; Jones, Sharon M.

    2014-01-01

    Current and future aviation safety trends related to the National Aeronautics and Space Administration's Atmospheric Environment Safety Technologies Project's three technical challenges (engine icing characterization and simulation capability; airframe icing simulation and engineering tool capability; and atmospheric hazard sensing and mitigation technology capability) were assessed by examining the National Transportation Safety Board (NTSB) accident database (1989 to 2008), incidents from the Federal Aviation Administration (FAA) accident/incident database (1989 to 2006), and literature from various industry and government sources. The accident and incident data were examined for events involving fixed-wing airplanes operating under Federal Aviation Regulation (FAR) Parts 121, 135, and 91 for atmospheric conditions related to airframe icing, ice-crystal engine icing, turbulence, clear air turbulence, wake vortex, lightning, and low visibility (fog, low ceiling, clouds, precipitation, and low lighting). Five future aviation safety risk areas associated with the three AEST technical challenges were identified after an exhaustive survey of a variety of sources and include: approach and landing accident reduction, icing/ice detection, loss of control in flight, super density operations, and runway safety.

  20. ACOG Technology Assessment in Obstetrics and Gynecology No. 6: Robot-assisted surgery.

    Science.gov (United States)

    2009-11-01

    The field of robotic surgery is developing rapidly, but experience with this technology is currently limited. In response to increasing interest in robotics technology, the Committee on Gynecologic Practice's Technology Assessment was developed to describe the robotic surgical system,potential advantages and disadvantages, gynecologic applications, and the current state of the evidence. Randomized trials comparing robot-assisted surgery with traditional laparoscopic, vaginal, or abdominal surgery are needed to evaluate long-term clinical outcomes and cost-effectiveness, as well as to identify the best applications of this technology.

  1. Technology status in support of refined technical baseline for the Spent Nuclear Fuel project. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Puigh, R.J.; Toffer, H.; Heard, F.J.; Irvin, J.J.; Cooper, T.D.

    1995-10-20

    The Spent Nuclear Fuel Project (SNFP) has undertaken technology acquisition activities focused on supporting the technical basis for the removal of the N Reactor fuel from the K Basins to an interim storage facility. The purpose of these technology acquisition activities has been to identify technology issues impacting design or safety approval, to establish the strategy for obtaining the necessary information through either existing project activities, or the assignment of new work. A set of specific path options has been identified for each major action proposed for placing the N Reactor fuel into a ``stabilized`` form for interim storage as part of this refined technical basis. This report summarizes the status of technology information acquisition as it relates to key decisions impacting the selection of specific path options. The following specific categories were chosen to characterize and partition the technology information status: hydride issues and ignition, corrosion, hydrogen generation, drying and conditioning, thermal performance, criticality and materials accountability, canister/fuel particulate behavior, and MCO integrity. This report represents a preliminary assessment of the technology information supporting the SNFP. As our understanding of the N Reactor fuel performance develops the technology information supporting the SNFP will be updated and documented in later revisions to this report. Revision 1 represents the incorporation of peer review comments into the original document. The substantive evolution in our understanding of the technical status for the SNFP (except section 3) since July 1995 have not been incorporated into this revision.

  2. Technology status in support of refined technical baseline for the Spent Nuclear Fuel project. Revision 1

    International Nuclear Information System (INIS)

    Puigh, R.J.; Toffer, H.; Heard, F.J.; Irvin, J.J.; Cooper, T.D.

    1995-01-01

    The Spent Nuclear Fuel Project (SNFP) has undertaken technology acquisition activities focused on supporting the technical basis for the removal of the N Reactor fuel from the K Basins to an interim storage facility. The purpose of these technology acquisition activities has been to identify technology issues impacting design or safety approval, to establish the strategy for obtaining the necessary information through either existing project activities, or the assignment of new work. A set of specific path options has been identified for each major action proposed for placing the N Reactor fuel into a ''stabilized'' form for interim storage as part of this refined technical basis. This report summarizes the status of technology information acquisition as it relates to key decisions impacting the selection of specific path options. The following specific categories were chosen to characterize and partition the technology information status: hydride issues and ignition, corrosion, hydrogen generation, drying and conditioning, thermal performance, criticality and materials accountability, canister/fuel particulate behavior, and MCO integrity. This report represents a preliminary assessment of the technology information supporting the SNFP. As our understanding of the N Reactor fuel performance develops the technology information supporting the SNFP will be updated and documented in later revisions to this report. Revision 1 represents the incorporation of peer review comments into the original document. The substantive evolution in our understanding of the technical status for the SNFP (except section 3) since July 1995 have not been incorporated into this revision

  3. ERCIM technical reference digital library. Joint Ercim Action

    OpenAIRE

    Biagioni, Stefania

    1998-01-01

    New technologies, especially the Internet and WWW, are radically changing the roles of content providers and content consumers with respect to multimedia on-line services. For this reason, ERCIM has decided to set up an experimental system to link collections of technical reports and other types of grey literature of the ERCIM member research centres and labs on-line. The aim of this service is to assist ERCIM scientists to make their research results immediately available world-wide and prov...

  4. 1998 Chemical Technology Division Annual Technical Report. Applying chemical innovation to environmental problems

    International Nuclear Information System (INIS)

    Ackerman, J.P.; Einziger, R.E.; Gay, E.C.; Green, D.W.; Miller, J.F.

    1999-01-01

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented

  5. Counseling Issues for Gay Men and Lesbians Seeking Assisted Reproductive Technologies (ART)

    Science.gov (United States)

    ... for Reproductive Medicine Counseling issues to discuss with gay men and lesbians seeking assisted reproductive technology (ART) More lesbian, gay, bisexual, and transgender (LGBT) individuals and couples are ...

  6. Advanced Technology, a Broad Technical Bachelor Programme at the University of Twente

    NARCIS (Netherlands)

    Flokstra, Jaap; Boukamp, Bernard; Hemmes, Herman; Carvalho, Dinis; van Hattum-Janssen, Natascha; Lima, Rui M.

    2009-01-01

    Advanced Technology is a unique bachelor program at the University of Twente that has a strong multidisciplinary character. The technical component is dominant but is clearly linked to social sciences with emphasis on entrepreneurship. The courses like “Introduction to Engineering” have a leading

  7. Advances in heavy water reactor technology. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-11-01

    This IAEA meeting addressed both the status of national programmes and technical topics including advances in plant and system design and new plant features, development of pressure tube technologies, fuel and fuel cycle options, computer code development and verification, and safety and accident analysis

  8. Research and Technology, 1998

    Science.gov (United States)

    1999-01-01

    This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for the fiscal year 1998. It comprises 134 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to he a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. At the time of publication, NASA Lewis was undergoing a name change to the NASA John H. Glenn Research Center at Lewis Field.

  9. Evaluation of a Cooperative Extension Service Curriculum on Empowering Older Adults with Assistive Technology to Grocery Shop, Prepare Food, and Eat

    Science.gov (United States)

    Hermann, Janice R.; Johnston, Jan H.; Brosi, Whitney A.; Jaco, Linda

    2012-01-01

    The Empowering Older Adults with Assistive Technology to Shop, Cook and Eat curriculum was designed to provide education about concepts of empowerment and assistive technology for grocery shopping, preparing food, and eating. The curriculum included examples and hands-on demonstrations of assistive technology devices for grocery shopping, food…

  10. Text processing for technical reports (direct computer-assisted origination, editing, and output of text)

    Energy Technology Data Exchange (ETDEWEB)

    De Volpi, A.; Fenrick, M. R.; Stanford, G. S.; Fink, C. L.; Rhodes, E. A.

    1980-10-01

    Documentation often is a primary residual of research and development. Because of this important role and because of the large amount of time consumed in generating technical reports, particularly those containing formulas and graphics, an existing data-processing computer system has been adapted so as to provide text-processing of technical documents. Emphasis has been on accuracy, turnaround time, and time savings for staff and secretaries, for the types of reports normally produced in the reactor development program. The computer-assisted text-processing system, called TXT, has been implemented to benefit primarily the originator of technical reports. The system is of particular value to professional staff, such as scientists and engineers, who have responsibility for generating much correspondence or lengthy, complex reports or manuscripts - especially if prompt turnaround and high accuracy are required. It can produce text that contains special Greek or mathematical symbols. Written in FORTRAN and MACRO, the program TXT operates on a PDP-11 minicomputer under the RSX-11M multitask multiuser monitor. Peripheral hardware includes videoterminals, electrostatic printers, and magnetic disks. Either data- or word-processing tasks may be performed at the terminals. The repertoire of operations has been restricted so as to minimize user training and memory burden. Spectarial staff may be readily trained to make corrections from annotated copy. Some examples of camera-ready copy are provided.

  11. Research and Technology 1995

    Science.gov (United States)

    1996-01-01

    This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for fiscal year 1995. It comprises over 150 short articles submitted by the staff members of the technical directorates. The report is organized into six major sections: aeronautics, aerospace technology, space flight systems, engineering support, Lewis Research Academy, and technology transfer. A table of contents, an author index, and a list of NASA Headquarters program offices have been included to assist the reader in finding articles of special interest. This report is not intended to be a comprehensive summary of all research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff members and contractors (for abstracts of these Lewis-authored reports, visit the Lewis Technical Report Server (LETRS) on the World Wide Web-http://letrs.lerc.nasa.gov/LeTRS/). In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about Lewis' research, visit us on the World Wide web-http://www.lerc.nasa.gov.

  12. Research and Technology 2004

    Science.gov (United States)

    2005-01-01

    This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2004. It comprises 133 short articles submitted by the staff scientists and engineers. The report is organized into three major sections: Programs and Projects, Research and Technology, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information, visit Glenn's Web site at http://www.nasa.gov/glenn/. This document is available online (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov).

  13. Assessing acceptance of assistive social agent technology by older adults: the Almere model

    NARCIS (Netherlands)

    Heerink, M.; Kröse, B.; Evers, V.; Wielinga, B.

    2010-01-01

    This paper proposes a model of technology acceptance that is specifically developed to test the acceptance of assistive social agents by elderly users. The research in this paper develops and tests an adaptation and theoretical extension of the Unified Theory of Acceptance and Use of Technology

  14. The story of technical cooperation

    International Nuclear Information System (INIS)

    Park, Yang Taek

    1989-09-01

    This book gives descriptions of technical cooperation, which is about why does technology transfer?, process of technology transfer with model, decisive cause and cooperation of technology transfer, cost and effect of technology transfer, historical experience of technology transfer, cases of technology transfer by field such as rubber tire, medicine and computer industry and automobile industry, technology transfer process and present condition of technical cooperation, and strategy for rising of technical cooperation : selection of technology for object of cooperation and development of human resources.

  15. The Office of Technology Development technical reports. A bibliography

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The US Department of Energy`s Office of Technology Development (OTD) within the Office of Environmental Management was established in 1989 to conduct an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT&E) for innovative environmental cleanup solutions that are safer and more time- and cost-effective than those currently available. In many cases, the development of new technology presents the best hope for ensuring a substantive reduction in risk to the environment and improved worker/public safety within realistic financial constraints. Five major remediation and waste management problem areas have been identified to date within the DOE weapons complex; Contaminant Plume Containment and Remediation; Mixed Waste Characterization, Treatment, and Disposal; High-Level Waste Tank Remediation; Landfill Stabilization; and Facility Transitioning, Decommissioning, and Final Disposition. New technologies to address these problem areas are demonstrated to the point that they are proven to work and that they can be transferred to the private sector end-users. This bibliography contains information on scientific and technical reports sponsored by the Office of Environmental Management from its inception in 1989 through June 1994. Future issues contain reports from Technology Development activities and will be published biannually.

  16. The influence of assistive technology on occupational performance and satisfaction of leprosy patients with grade 2 disabilities

    Directory of Open Access Journals (Sweden)

    Lucas da Silva Muniz

    Full Text Available Abstract INTRODUCTION: We aimed to investigate the feasibility of assistive technology (AT devices to improve leprosy patients' occupational performances and satisfaction. METHODS: This is a pretest-posttest design study. The Canadian Occupational Performance Measure was used to assess the occupational performance and satisfaction of five leprosy participants with grade 2 disabilities before and after ten 45-minute interventions using assistive technology devices. RESULTS: The data showed a statistically significant 7-point average improvement (p<0.05 in participants' post-intervention performance and satisfaction scores. CONCLUSIONS: Assistive technology devices may be useful therapeutic tools to enhance autonomy/independence and satisfaction of leprosy patients with grade 2 disabilities.

  17. (Technical and engineering support for the Office of Industrial Programs)

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    As of April 19, 1991, technical, operational and analytic support and assistance to the offices and divisions of the Office of Renewable Energy, under contract DE-AC01-86CE30844 was completed. The overall work effort, initiated February 20, 1986, was characterized by timely, comprehensive, high quality, professional responsiveness to a broad range of renewable energy program operational support requirements. These are no instances of failure to respond, nor unacceptable response, during the five-year period. The technology program areas covered are Solar Buildings Technology, Wind Energy Technology, Photovoltaic Energy Technology, Geothermal Energy Technology, Biofuels and Municipal Waste Technology, Solar Thermal Technology, Hydropower Energy Technology, Ocean Energy Technology, and Electric Energy Systems and Energy Storage. The analytical and managerial support provided to the office and staff of the Deputy Assistant Secretary for Renewable Energy enabled a comprehensive evaluation of program and policy alternatives, and the selection and execution of appropriate courses of action from amongst those alternatives. Largely through these means the Office has been able to maintain continuity and a meaningful program thrust through the vacillations of policies and budgets that it has experienced over that it has experienced over the past five years. Appended are summaries of support activities within each of the individual technology program areas, as well as a complete listing of all project deliverables and due-dates for each submittal under the contract.

  18. [Technical and engineering support for the Office of Industrial Programs

    International Nuclear Information System (INIS)

    1991-01-01

    As of April 19, 1991, technical, operational and analytic support and assistance to the offices and divisions of the Office of Renewable Energy, under contract DE-AC01-86CE30844 was completed. The overall work effort, initiated February 20, 1986, was characterized by timely, comprehensive, high quality, professional responsiveness to a broad range of renewable energy program operational support requirements. These are no instances of failure to respond, nor unacceptable response, during the five-year period. The technology program areas covered are Solar Buildings Technology, Wind Energy Technology, Photovoltaic Energy Technology, Geothermal Energy Technology, Biofuels and Municipal Waste Technology, Solar Thermal Technology, Hydropower Energy Technology, Ocean Energy Technology, and Electric Energy Systems and Energy Storage. The analytical and managerial support provided to the office and staff of the Deputy Assistant Secretary for Renewable Energy enabled a comprehensive evaluation of program and policy alternatives, and the selection and execution of appropriate courses of action from amongst those alternatives. Largely through these means the Office has been able to maintain continuity and a meaningful program thrust through the vacillations of policies and budgets that it has experienced over that it has experienced over the past five years. Appended are summaries of support activities within each of the individual technology program areas, as well as a complete listing of all project deliverables and due-dates for each submittal under the contract

  19. Assistant director of intramural sports and technology recognized for innovative contributions

    OpenAIRE

    Kropff, Catherine L.

    2009-01-01

    Jennifer Rezac, assistant director of intramural sports and technology at Virginia Tech, was recognized at the National Intramural-Recreational Sports Association (NIRSA) Annual Conference in Charlotte, N.C., in April for her contributions to the Virginia Tech Recreational Sports department.

  20. Technology integration plan

    International Nuclear Information System (INIS)

    Henry, R.; Sumpter, K.C.

    1995-01-01

    In 1992, the Secretary of Energy directed the Assistant Secretary for Environmental Management (EM) to develop an integrated, long-term, spent nuclear fuel (SNF) management program. In response, EM created the Integrated SNF Program to assess the US Department of Energy (DOE) SNF and SNF storage facilities. As shown in Figure 1 the Integrated SNF Program is responsible for life-cycle management of DOE SNF; that is characterization, processing, interim storage and preparation for disposal. In order to implement the Program it was recognized that technology needs must be identified. A Technology Integration Program was formed to integrate the DOE complex-wide efforts for establishing timely, cost effective and consistent technical criteria for the development of technical solutions. The program is directed toward identification of: (a) what activities need to be done, (b) when they need to be completed, and (c) what priority should be assigned to the various activities

  1. The Agency's Technical Co-operation programme with Peru, 1982-1992. Country programme summaries

    International Nuclear Information System (INIS)

    1992-01-01

    The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $12.6 million of Agency support received, Peru ranks 4th among all recipients of technical assistance in the period 1958 - 1991, whereby it ranked as high as 2nd in each of the four years 1982 through 1985. More than half of the assistance during the past ten years has been provided in the form of equipment (59%), followed by expert services (29%) and training (12%). Forty-five per cent of the resources were provided by the Technical Assistance and Co-operation Fund, while 29% of the resources were made available through extrabudgetary contributions, and 21% by UNDP. The remaining 5% were provided in kind. With regard to project disbursement by sector, the largest areas have been agriculture (27%), general atomic energy development (17%), nuclear raw materials (14%), nuclear medicine (12%) and industry and hydrology (11%). Nuclear safety, nuclear engineering and technology, and nuclear physics and chemistry have each received less than ten per cent of the assistance provided

  2. The Agency's Technical Co-operation programme with Egypt, 1982-1992. Country programme summaries

    International Nuclear Information System (INIS)

    1992-01-01

    The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $22.2 million of Agency support received, Egypt ranks first among all recipients of technical assistance, not only for the period 1958 - 1991, but also held this rank in each of the five years 1982 through 1986 and in 1988. More than half of this assistance has been provided in the form of equipment (57%), followed by expert services (19%), training (17%) and sub-contracts (7%). With 42% and 43%, respectively, the Technical Assistance and Co-operation Fund and extrabudgetary contributions hold almost equal shares in the total resources available, while in-kind assistance accounts for 9% and UNDP for 6% of the resources. With regard to project disbursement during the past ten years, by sector, the two largest areas have been nuclear safety (34%) and agriculture (33%), followed by nuclear engineering and technology (11%). Smaller shares - from 4% to 7% each-- have gone to industry and hydrology, nuclear medicine, nuclear physics and chemistry, and general atomic energy development

  3. Developing Inclusive Technical Capital beyond the Disabled Students’ Allowance in England

    Directory of Open Access Journals (Sweden)

    Simon Hayhoe

    2015-12-01

    Full Text Available The Disabled Students Allowance (DSA is a government grant for students aged 18 years and over in English Higher Education. Amongst other things, this grant supports the provision of traditional assistive technologies. In April 2014, the UK’s Minister for Universities, Science and Cities proposed cuts to the DSA. Although a later announcement delayed these cuts until the academic year 2016−2017, a number of universities are already preparing alternative means to support disabled students. In this article, it is argued that cuts to the DSA will potentially reduce the cultural and technical capitals of students with disabilities and lessen social inclusion in Higher Education. In particular, less support will potentially lead to a reduction in the development of study skills. As a counter weight, this article proposes a new model of inclusive technical capital. This model originates in Bourdieu’s theory of cultural capital and habitus. The proposed model supports the use of native apps and settings in ubiquitous mainstream mobile technologies. It also espouses the use of m-learning for the passive inclusion of students with disabilities. This article also presents the early results of a project on the use of mobile technologies at the London School of Economics and Canterbury Christ Church University. This project found that students with disabilities and their lecturers already used mobile technologies alongside or instead of customized traditional assistive technologies. The project also found that students preferred not to attend, or found it difficult to attend, separate study skills courses using mobile technologies. However, they were more likely to access m-learning tutorial materials on Learning Management Systems. The study concludes that mobile technologies have the potential to develop a number of study skills that are at risk after cuts to the DSA. However, their use in this regard needs further research and support from

  4. A profile of technology-assisted children and young people in north west England.

    Science.gov (United States)

    Kirk, Susan

    2008-11-01

    To obtain a profile of children and young people in north west England who needed the ongoing support of medical technology. As part of a larger study, 28 community children's nursing teams in the north west of England were asked to profile the children and young people on their caseloads who needed the ongoing support of medical technology. Twenty-five teams returned data, from which a total of 591 children and young people were identified. The most prevalent technology used was gastrostomy/jejunostomy, which was used by more than two-thirds of the sample. Over a quarter of the children/young people were supported by more than one technology. The majority of the children/young people were seven years old or younger Although most had used the technology for five years or less (71 per cent), there were 164 children/ young people who had been technology-assisted for six or more years. Although there are limitations in this study, the data is nevertheless useful for planning future services and support, including identifying the numbers of young people who will be transferring to adult services. A more efficient means of collecting these data would be to systematically record long-term conditions and technology assistance in electronic health records.

  5. Marketing Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

    Science.gov (United States)

    Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

    This document presents the Ohio Integrated Technical and Academic Competency profile for marketing technology. The profile is to serve as the basis for curriculum development in Ohio's secondary, adult, and postsecondary programs. The profile includes a comprehensive listing of 580 specialty and foundation key indicators for evaluating mastery of…

  6. Physician attitudes regarding pregnancy, fertility care, and assisted reproductive technologies for HIV-infected individuals and couples.

    Science.gov (United States)

    Yudin, Mark H; Money, Deborah M; Cheung, Matthew C; Loutfy, Mona R

    2012-01-01

    Family and pregnancy planning are important for HIV-infected individuals and couples. There is a paucity of data regarding physician attitudes with respect to reproduction in this population, but some evidence suggests that attitudes can influence the information, advice, and services they will provide. To determine physician attitudes toward pregnancy, fertility care, and access to assisted reproductive technologies for HIV-infected individuals, and to determine whether attitudes differed based on specific physician characteristics. A survey was sent electronically to obstetrician/gynecologists and infectious disease specialists in Canada. Items were grouped into 5 key domains: physician demographics, physician attitudes toward pregnancy and adoption, physician attitudes toward fertility care, physician attitudes toward assisted reproductive technology, and challenges for an HIV-infected population. Attitudes were determined based on answers to individual questions and also for each domain. Univariate and logistic regression analyses were used to determine the influence of specific physician characteristics on attitudes. Completed surveys were received from 165 physicians. Most had positive attitudes regarding pregnancy or adoption (89%), fertility care (72%), and assisted reproductive technology (79%). In multivariate analyses, having cared for HIV-infected patients was significantly associated with having a positive attitude toward fertility care or assisted reproductive technology. In this national survey of Canadian physicians, most had positive attitudes toward pregnancy, adoption, fertility care, and use of assisted reproductive technology among HIV-infected persons. Physicians who had cared for HIV-infected individuals in the past were more likely to have positive attitudes than those who had not.

  7. Using assistive technology outcomes research to inform policy related to the employment of individuals with disabilities.

    Science.gov (United States)

    Mendelsohn, Steven; Edyburn, Dave L; Rust, Kathy L; Schwanke, Todd D; Smith, Roger O

    2008-01-01

    We know that work is recognized as a central component of life for individuals with and without disabilities. It yields many physical and psychological benefits to the individual while simultaneously contributing numerous benefits to society. Lawmakers have enacted a plethora of laws designed to prevent discrimination, provide incentives for employers to hire individuals with disabilities, and facilitate job training/career preparation. Assistive technology figures prominently in disability employment law as a critical strategy for gaining access and supporting employment and upward mobility in the workplace. However, little systematic effort has been devoted to examining assistive technology use and outcomes as they relate to the employment of individuals with disabilities. The purpose of this article is to articulate a series of issues that permeate assistive technology outcome measurement in employment settings and subsequently affect the use of research knowledge for federal and state policy makers. For each issue, the authors pose three questions for critical analysis: Does the law compel the provision of assistive technology? Does outcome data play any part in the operation of the law? When it does, what kind of data would be useful to collect and where could it be found? Finally, the authors provide a brief glimpse of the current and future research efforts concerning the RSA-911 database. The recent database summaries exemplify the importance of such a national data collection system for informing federal policy, particularly concerning the contributions of assistive technology device use and services on improving the employment of individuals with disabilities.

  8. Chemical Technology Division annual technical report, 1986

    Energy Technology Data Exchange (ETDEWEB)

    1987-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1986 are presented. In this period, CMT conducted research and development in areas that include the following: (1) high-performance batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants, the technology for fluidized-bed combustion, and a novel concept for CO/sub 2/ recovery from fossil fuel combustion; (5) methods for recovery of energy from municipal waste; (6) methods for the electromagnetic continuous casting of steel sheet; (7) techniques for treatment of hazardous waste such as reactive metals and trichloroethylenes; (8) nuclear technology related to waste management, a process for separating and recovering transuranic elements from nuclear waste, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (9) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 127 refs., 71 figs., 8 tabs.

  9. Matching technologies of home automation, robotics, assistance, geriatric telecare and telemedicine

    NARCIS (Netherlands)

    Franchimon, F.; Brink, M.

    2009-01-01

    The aging society could have a greater societal impact than the current financial crisis. The percentage of older adults has increased while the size of the health care workforce has remained constant. Home automation, robotics, assistive technology, geriatric telecare and telemedicine can support

  10. A Review of Warm Mix Asphalt Technology: Technical, Eco-nomical and Enviromental Aspects

    Directory of Open Access Journals (Sweden)

    Hugo Alexander Rondón

    2015-09-01

    Full Text Available In general terms, warm mix asphalt (WMA technology presents a wide potential for successful use in road works construction projects. However, concerns remain regarding the durability and behavior of WMA mixtures in the long term, which need to be addressed. This review focuses on the technical, economic and environmental advantages and disadvantages. The review concludes that the main advantage, at the moment, of this technology concerns the environment. At the end of this work, the authors include certain recommendations for future works to continue strengthening the development of WMA technology.

  11. Mobile Assisted Language Learning: Review of the Recent Applications of Emerging Mobile Technologies

    Science.gov (United States)

    Yang, Jaeseok

    2013-01-01

    As mobile computing technologies have been more powerful and inclusive in people's daily life, the issue of mobile assisted language learning (MALL) has also been widely explored in CALL research. Many researches on MALL consider the emerging mobile technologies have considerable potentials for the effective language learning. This review study…

  12. The Earth Resources Observation Systems data center's training technical assistance, and applications research activities

    Science.gov (United States)

    Sturdevant, J.A.

    1981-01-01

    The Earth Resources Observation Systems (EROS) Data Center (EDO, administered by the U.S. Geological Survey, U.S. Department of the Interior, provides remotely sensed data to the user community and offers a variety of professional services to further the understanding and use of remote sensing technology. EDC reproduces and sells photographic and electronic copies of satellite images of areas throughout the world. Other products include aerial photographs collected by 16 organizations, including the U.S. Geological Survey and the National Aeronautics and Space Administration. Primary users of the remotely sensed data are Federal, State, and municipal government agencies, universities, foreign nations, and private industries. The professional services available at EDC are primarily directed at integrating satellite and aircraft remote sensing technology into the programs of the Department of the Interior and its cooperators. This is accomplished through formal training workshops, user assistance, cooperative demonstration projects, and access to equipment and capabilities in an advanced data analysis laboratory. In addition, other Federal agencies, State and local governments, universities, and the general public can get assistance from the EDC Staff. Since 1973, EDC has contributed to the accelerating growth in development and operational use of remotely sensed data for land resource problems through its role as educator and by conducting basic and applied remote sensing applications research. As remote sensing technology continues to evolve, EDC will continue to respond to the increasing demand for timely information on remote sensing applications. Questions most often asked about EDC's research and training programs include: Who may attend an EDC remote sensing training course? Specifically, what is taught? Who may cooperate with EDC on remote sensing projects? Are interpretation services provided on a service basis? This report attempts to define the goals and

  13. NREL technical assistance to Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Lilienthal, P. [National Renewable Energy Lab., Golden, CO (United States)

    1997-12-01

    This paper describes assistance to Argentina from the National Renewable Energy Laboratory which has touched on four programs: tariff analysis for rural concessions programs; wind/diesel hybrid retrofits in Patagonia; small hybrid systems designs for rural schools; an assessment of wind resources. The paper expands briefly on the first two points.

  14. IRANIAN LEARNERS’ PERCEPTIONS OF THE IMPACT OF TECHNOLOGY-ASSISTED INSTRUCTION ON THEIR ENGLISH AURAL/ORAL SKILLS

    Directory of Open Access Journals (Sweden)

    Rozi Souzanzan

    2017-02-01

    Full Text Available The present study aimed to investigate the perceptions of Iranian English as Foreign Language (EFL learners regarding the impact of technology-assisted instruction through the utilization of Information and Communication Technologies (ICTs on their listening comprehension and speaking ability. To this end, eighty Iranian EFL learners whose age range was between twenty to thirty five took part in the study. They were randomly divided into four groups and were exposed to technology-assisted instruction on their course-related contents through different ICTs as their out-of-class activities for one hour per week during two and a half months. The ICTs which were the focus of this study included: Podcasts, YouTube, Skype, and Instagram. The analysis of the participants’ answers indicated that the majority of them (83.8% were positive toward technology-assisted instruction. In addition, 80% of them tended to use ICTs for their future language learning purposes.

  15. IAEA activities in gas-cooled reactor technology development

    International Nuclear Information System (INIS)

    Cleveland, J.; Kupitz, J.

    1992-01-01

    The International Atomic Energy Agency (IAEA) has the charter to ''foster the exchange of scientific and technical information'', and ''encourage and assist research on, and development and practical application of, atomic energy for peaceful uses throughout the world''. This paper describes the Agency's activities in Gas-cooled Reactor (GCR) technology development

  16. Potential of Exoskeleton Technology to Assist Older Adults with Daily Living

    NARCIS (Netherlands)

    Jung, Merel Madeleine; Ludden, Geke D.S.

    Mobility impairments can prevent older adults from performing their daily activities which highly impacts a person's quality of life. Exoskeleton technology can assist older adults by providing additional support to compensate for age-related decline in muscle strength. To date little is known about

  17. Effectiveness of Assistive Technologies for Low Vision Rehabilitation: A Systematic Review

    Science.gov (United States)

    Jutai, Jeffrey W.; Strong, J. Graham; Russell-Minda, Elizabeth

    2009-01-01

    "Low vision" describes any condition of diminished vision that is uncorrectable by standard eyeglasses, contact lenses, medication, or surgery that disrupts a person's ability to perform common age-appropriate visual tasks. Examples of assistive technologies for vision rehabilitation include handheld magnifiers; electronic vision-enhancement…

  18. Gaze-based assistive technology used in daily life by children with severe physical impairments - parents' experiences

    OpenAIRE

    Borgestig, Maria; Rytterstrom, Patrik; Hemmingsson, Helena

    2017-01-01

    Objective: To describe and explore parents' experiences when their children with severe physical impairments receive gaze-based assistive technology (gaze-based assistive technology (AT)) for use in daily life. Methods: Semi-structured interviews were conducted twice, with one year in between, with parents of eight children with cerebral palsy that used gaze-based AT in their daily activities. To understand the parents' experiences, hermeneutical interpretations were used during data analysis...

  19. The Agency's Technical Co-operation programme with Sudan, 1982-1992. Country programme summaries

    International Nuclear Information System (INIS)

    1992-01-01

    The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $5.7 million of Agency support received, Sudan ranks 31st among all recipients of technical assistance in the period 1958 through 1991. Over the past ten years, almost equal shares of this assistance were provided in the form of equipment (46%) and training (42%), and only a small percentage was provided in the form of expert services (12%). The best part of the resources was made available through the Technical Assistance and Co-operation Fund (77%), while in-kind and extrabudgetary contributions account for 13% and 10% of the resources, respectively. With regard to project disbursement during the past ten years, by sector, the two largest areas have been general atomic energy development (37%) and agriculture (21%), followed by nuclear medicine (14%). Smaller shares (6% each) have gone to nuclear physics and chemistry, nuclear engineering and technology, hydrology, and nuclear safety

  20. Instituto de Asuntos Nucleares: Science and technology for progress

    International Nuclear Information System (INIS)

    Ahumada, J.J.; Zuleta, S.; Lucero, E.; Guzman, O.; Zamora, H.; Briceno de M, C.

    1989-01-01

    On the thirtieth anniversary celebration of the ''Instituto de Asuntos Nucleares'', a historical review of its activities has been made, emphasizing on its politics of development, technological and scientific advances, including the goals and accomplishments attained for the uses and applications of nuclear technology in Colombia. This includes the technical assistance which is being provided by International Organizations. National and international influences are shown for each one of the technical areas: agricultural applications, industrial applications and metallurgy, biochemistry and radiopharmacy, development process, nuclear electronics, solar and non-conventional energies, gamma facility, nuclear physics, hydrology, raw materials, chemistry, health radiophysics, reactor, nuclear documentation and information center and administration

  1. Development of Technology Transfer Economic Growth Metrics

    Science.gov (United States)

    Mastrangelo, Christina M.

    1998-01-01

    The primary objective of this project is to determine the feasibility of producing technology transfer metrics that answer the question: Do NASA/MSFC technical assistance activities impact economic growth? The data for this project resides in a 7800-record database maintained by Tec-Masters, Incorporated. The technology assistance data results from survey responses from companies and individuals who have interacted with NASA via a Technology Transfer Agreement, or TTA. The goal of this project was to determine if the existing data could provide indications of increased wealth. This work demonstrates that there is evidence that companies that used NASA technology transfer have a higher job growth rate than the rest of the economy. It also shows that the jobs being supported are jobs in higher wage SIC codes, and this indicates improvements in personal wealth. Finally, this work suggests that with correct data, the wealth issue may be addressed.

  2. The use of assistive technology resources for disabled children in regular schooling: the teachers’ perception

    Directory of Open Access Journals (Sweden)

    2012-12-01

    Full Text Available The national School Census revealed that 702,603 disabled people were enrolled in regular educationin 2010. The use of assistive technology resources in the school context has been indicated to favor the executionof tasks and the access to educational content and school environments and, consequently, help disabledindividuals’ learning. However, there are few studies showing the impact of these resources in the educationprocess of children with physical disabilities. The aim of this study was to identify, from the teacher’s viewpoint,the contributions and difficulties in the use of technology resources with students with cerebral palsy, focusingon those with severe motor impairment, attending regular education. The study included five teachers of these students who were using assistive technology resources in the execution of writing and/or communicationassignments. Semi-structured interviews were conducted and data were analyzed following the CollectiveSubject Discourse (CSD technique. Results indicated that assistive technology resources are already includedin regular schools and that they have brought contributions to the education process of children with cerebralpalsy in regular class; nevertheless, they are being implemented without systematization, monitoring and/orpartnerships. The study pointed to the need to consider the opinions and requirements of the people involved inthe context where the use of technology is inserted.

  3. Role of varicocele treatment in assisted reproductive technologies

    Directory of Open Access Journals (Sweden)

    Mehmet G. Sönmez

    2018-03-01

    Full Text Available Objective: In this review, we investigate the advantage of varicocele repair prior to assisted reproductive technologies (ART for infertile couples and provide cost analysis information. Materials and methods: We searched the following electronic databases: PubMed, Medline, Excerpta Medica Database (Embase, Cumulative Index to Nursing and Allied Health Literature (CINAHL. The following search strategy was modified for the various databases and search engines: ‘varicocele’, ‘varicocelectomy’, ‘varicocele repair’, ‘ART’, ‘in vitro fertilisation (IVF’, ‘intracytoplasmic sperm injection (ICSI’. Results: A total of 49 articles, including six meta-analyses, 32 systematic reviews, and 11 original articles, were included in the analysis. Bypassing potentially reversible male subfertility factors using ART is currently common practice. However, varicocele may be present in 35% of men with primary infertility and 80% of men with secondary infertility. Varicocele repair has been shown to be an effective treatment for infertile men with clinical varicocele, thus should play an important role in the treatment of such patients due to the foetal/genetic risks and high costs that are associated with increased ART use. Conclusion: Varicocele repair is a cost-effective treatment method that can improve semen parameters, pregnancy rates, and live-birth rates in most infertile men with clinical varicocele. By improving semen parameters and sperm structure, varicocele repair can decrease or even eliminate ART requirement. Keywords: Assisted reproductive technology, In vitro fertilisation, Intracytoplasmic sperm injection, Varicocele, Varicocelectomy

  4. Technical and Technological Support of Agricultural Enterprises on the Basis of Association Interaction: a Methodical Approach

    Directory of Open Access Journals (Sweden)

    Pyvovar Petro V.

    2017-12-01

    Full Text Available The aim of the research is the development of a methodical approach to justifying directions of association interaction of agricultural enterprises for the most effective technical and technological support of their economic activities. It is substantiated that the decision-making regarding the directions of group interaction in the field of forming and using the machine and tractor fleet of agricultural enterprises should be based on results of a strategic analysis of the current level of and trends in the changes in indicators of their technical support. This includes several stages: 1 determining a scenario for the development of the technical base of the economic entity (matrix methods; 2 multifactor grouping taking into account the available equipment and resource potential; 3 identification of potential sources of financing and ways of attracting necessary funds, priority partners and types of equipment and technologies; 4 estimation of a current condition of the enterprise on financial, technical, economic and market criteria; 5 substantiation of directions of group interaction of the enterprise.

  5. The costs and consequences of assisted reproductive technology : an economic perspective

    NARCIS (Netherlands)

    Connolly, Mark P.; Hoorens, Stijn; Chambers, Georgina M.

    2010-01-01

    Despite the growing use of assisted reproductive technologies (ART) worldwide, there is only a limited understanding of the economics of ART to inform policy about effective, safe and equitable financing of ART treatment. A review was undertaken of key studies regarding the costs and consequences of

  6. Assistive technology use and human rights enjoyment: a cross-sectional study in Bangladesh.

    Science.gov (United States)

    Borg, Johan; Larsson, Stig; Ostergren, Per-Olof; Rahman, Asm Atiqur; Bari, Nazmul; Khan, Ahm Noman

    2012-09-19

    About half a billion people with disabilities in developing countries have limited access to assistive technology. The Convention on the Rights of persons with Disabilities requires governments to take measures to ensure provision of such technologies. To guide implementation of these measures there is a need for understanding health outcomes from a human rights perspective. The objective of this study was therefore to explore the relation between assistive technology use and enjoyment of human rights in a low-income country. Data was collected in eight districts of Bangladesh through interviews of people with hearing impairments using and not using hearings aids, and people with ambulatory impairments using and not using manual wheelchairs (N = 583). Using logistic regression, self-reported outcomes on standard of living, health, education, work, receiving information and movement were analyzed. The adjusted likelihood of reporting greater enjoyment of human rights was significantly higher among people using hearing aids compared to non-users for all outcomes except working status. Compared to non-users, users of wheelchairs reported a significantly higher adjusted likelihood of good ambulatory performance and a significantly lower adjusted likelihood of reporting a positive working status. Further analyses indicated that physical accessibility to working places and duration of wheelchair use had a statistically significant impact on the likelihood of reporting positive work outcomes. The findings support the notion that assistive technology use increases the likelihood of human rights enjoyment, particularly hearing aid use. Physical accessibility should always be addressed in wheelchair provision.

  7. Risk disparities in the globalisation of assisted reproductive technology: the case of Asia.

    Science.gov (United States)

    Ha, Jung-Ok

    2013-01-01

    This paper analyses the disparities in risks associated with biomedical technology focusing on the results of assisted reproductive technology (ART). ART among biomedical technologies transferred to Asia is a representative case that reveals in its clinical use and related scientific research the global politics of technology. This study notes the global politics at work in the recognition of and reaction to such risks. While many Asian countries aggressively pursue technological development, weak legislative and administrative regulations have created various problems and controversial cases. This study asserts that risks associated with technology are characterised as social facts not natural ones or mere 'side effects', since technological development and risk are closely intertwined.

  8. Remote technology related to the handling, storage and disposal of spent fuel. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    Reduced radiation exposure, greater reliability and cost savings are all potential benefits of the application of remote technologies to the handling of spent nuclear fuel. Remote equipment and technologies are used to some extent in all facilities handling fuel and high-level wastes whether they are for interim storage, processing/repacking, reprocessing or disposal. In view of the use and benefits of remote technologies, as well as recent technical and economic developments in the area, the IAEA organized the Technical Committee Meeting (TCM) on Remote Technology Related to the Handling, Storage and/or Disposal of Spent Fuel. Twenty-one papers were presented at the TCM, divided into five general areas: 1. Choice of technologies; 2. Use of remote technologies in fuel handling; 3. Use of remote technologies for fuel inspection and characterization; 4. Remote maintenance of facilities; and 5. Current and future developments. Refs, figs and tabs.

  9. Lowest Price, Technically Acceptable Evaluation Criteria Used in the November 2014 Request for Proposal for the Program Executive Office Soldier Systems Engineering and Technical Assistance (SETA) Contract

    Science.gov (United States)

    2017-09-01

    GS-0895-09 Industrial Engineering Technician 23.04 7.56 GS-0810-09 Civil Engineering Developmental (Programming) 23.04 7.56 GS-0810-11 Civil ... Engineering –Programming 27.88 9.14 GS-0810-12 Civil Engineering –Design 33.41 10.96 GS-2210-09 Info Tech Spec (Network Systems/Customer Support) 23.04...USED IN THE NOVEMBER 2014 REQUEST FOR PROPOSAL FOR THE PROGRAM EXECUTIVE OFFICE SOLDIER SYSTEMS ENGINEERING AND TECHNICAL ASSISTANCE (SETA) CONTRACT

  10. Renewable Energy Project Development Assistance (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2013-07-01

    This fact sheet provides information on the Tribes selected to receive assistance from the U.S. Department of Energy Office of Indian Energy 2013 Strategic Technical Assistance Response Team (START) Program, which provides technical expertise to support the development of next-generation energy projects on tribal lands.

  11. Research and Technology 1999

    Science.gov (United States)

    2000-01-01

    This report selectively summarizes the NASA Glenn Research Center's research and technology accomplishments for the fiscal year 1999. It comprises 130 short articles submitted by the staff scientists and engineers. The report is organized into four major sections: Aeronautics. Research and Technology, Space, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at NASA Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available on the World Wide Web (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (GLTRS) on the World Wide Web (http://gltrs.grc.nasa.gov/GLTRS/).

  12. International Committee for Monitoring Assisted Reproductive Technologies world report: Assisted Reproductive Technology 2008, 2009 and 2010.

    Science.gov (United States)

    Dyer, S; Chambers, G M; de Mouzon, J; Nygren, K G; Zegers-Hochschild, F; Mansour, R; Ishihara, O; Banker, M; Adamson, G D

    2016-07-01

    What were utilization, outcomes and practices in assisted reproductive technology (ART) globally in 2008, 2009 and 2010? Global utilization and effectiveness remained relatively constant despite marked variations among countries, while the rate of single and frozen embryo transfers (FETs) increased with a concomitant slight reduction in multiple birth rates. ART is widely practised in all regions of the world. Monitoring utilization, an approximation of availability and access, as well as effectiveness and safety is an important component of universal access to reproductive health. This is a retrospective, cross-sectional survey on utilization, effectiveness and safety of ART procedures performed globally from 2008 to 2010. Between 58 and 61 countries submitted data from a total of nearly 2500 ART clinics each year. Aggregate country data were processed and analyzed based on forms and methods developed by the International Committee for Monitoring Assisted Reproductive Technologies (ICMART). Results are presented at country, regional and global level. For the years 2008, 2009 and 2010, >4 461 309 ART cycles were initiated, resulting in an estimated 1 144 858 babies born. The number of aspirations increased by 6.4% between 2008 and 2010, while FET cycles increased by 27.6%. Globally, ART utilization remained relatively constant at 436 cycles/million in 2008 and 474 cycles/million population in 2010, but with a wide country range of 8-4775 cycles/million population. ICSI remained constant at around 66% of non-donor aspiration cycles. The IVF/ICSI combined delivery rate (DR) per fresh aspiration was 19.8% in 2008; 19.7% in 2009 and 20.0% in 2010, with corresponding DRs for FET of 18.8, 19.7 and 20.7%. In fresh non-donor cycles, single embryo transfer increased from 25.7% in 2008 to 30.0% in 2010, while the average number of embryos transferred fell from 2.1 to 1.9, again with wide regional variation. The rates of twin deliveries following fresh non-donor transfers

  13. Renewable energy partnerships in development cooperation: Towards a relational understanding of technical assistance

    International Nuclear Information System (INIS)

    Kruckenberg, Lena J.

    2015-01-01

    Recent decades have witnessed a surge in international programmes established to assist the adoption of renewable energy technologies (RETs) in low and lower-middle income countries. So far, such programmes have yielded mixed success. While partnerships between international, national and local organisations have become the pre-eminent model for RET programmes, we know relatively little about their contribution. This article traces the role of renewable energy partnerships in development cooperation, shifting the analytical emphasis from barriers and drivers to key actors and their relationships. It presents a relational approach for the analysis of development assistance for renewable energy, drawing on theories concerning the role of strong and weak ties in inter-organisational networks. Through an analysis of seven empirical cases from Central America, the article provides insights into how different forms of inter-organisational relationships can facilitate implementation of RET programmes but do not necessarily enhance the capacities of local organisations in a way to support a more sustainable adoption of RETs. On the basis of this analysis, theoretical and policy implications are given concerning the potential of relational approaches for researching technology diffusion processes, and the role of strong and weak ties for the success – or failure – of renewable energy partnerships. - Highlights: • Study of renewable energy partnerships in development cooperation. • Relational framework for analysis of inter-organisational technology diffusion. • Empirical cases of renewable energy partnerships in Central America. • Different types of network relationships enable/inhibit sustainable adoption. • Three policy recommendations for programme development

  14. 7 CFR 3430.55 - Technical reporting.

    Science.gov (United States)

    2010-01-01

    ... required to submit other technical reports or submit the CRIS reports more frequently than annually... 7 Agriculture 15 2010-01-01 2010-01-01 false Technical reporting. 3430.55 Section 3430.55... ASSISTANCE PROGRAMS-GENERAL AWARD ADMINISTRATIVE PROVISIONS Post-Award and Closeout § 3430.55 Technical...

  15. TECHNOLOGICAL TOOLS: FROM TECHNICAL AFFORDANCES TO EDUCATIONAL AFFORDANCES

    Directory of Open Access Journals (Sweden)

    Nicos Valanides

    2018-04-01

    Full Text Available The integration of these tools in education and in authentic and effective learning/teaching environments has become an issue of great concern among educators, researchers and other related audiences. All emphasize the need to design and develop technology-enhanced curricula and teaching/learning environments (formal, non-formal and informal that are developmentally appropriate for young and/or older learners. The vision is to integrate the tools and their associated technical affordance in teaching/learning environments in such a way, so that all learners, irrespective of their cognitive differences and abilities, could increase their learning gains, and develop the abilities and skills that are needed for citizens of the 21st century.

  16. Emergency notification and assistance technical operations manual. Emergency preparedness and response. Date effective: 1 December 2002

    International Nuclear Information System (INIS)

    2002-11-01

    The Convention on Early Notification of a Nuclear Accident (the 'Early Notification Convention') and the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (the 'Assistance Convention') are the prime legal instruments that establish an international framework to facilitate the exchange of information and the prompt provision of assistance in the event of a nuclear accident or radiological emergency, with the aim of minimizing their consequences. The International Atomic Energy Agency (IAEA) has specific functions assigned to it under these Conventions, to which, in addition to a large number of States (Section 1.7), the World Health Organization (WHO), the World Meteorological Organization (WMO) and the Food and Agriculture Organization of the United Nations (FAO) are full parties. The arrangements between the IAEA, States that are IAEA Member States and/or Parties to one or both Conventions, all other relevant international intergovernmental organizations, and other States for facilitating the implementation of these Conventions specifically concerning those articles that are operational in nature - are documented in the Emergency Notification and Assistance Technical Operations Manual (ENATOM). In 2000, a complete revision of ENATOM, with all relevant sections updated, withdrawn or replaced with new material, was reissued as EPR-ENATOM (2000) to reflect new technological developments, operational concepts, views on standards in the area of emergency preparedness and response, and Member States' expectations. A separate publication, EPR-JPLAN (2000), the Joint Radiation Emergency Management Plan of the International Organizations (Joint Plan'), described a common understanding of how each of six co-sponsoring international organizations will act during a response and in making preparedness arrangements. It is intended that the ENATOM is reviewed and reissued biennially in line with the review cycle of the Joint Plan. Since the

  17. Assistive Technology for Students with Disabilities: A Legal Analysis of Issues

    Science.gov (United States)

    Etscheidt, Susan Larson

    2016-01-01

    Individualized Education Program (IEP) teams are required by the Individuals with Disabilities Education Act (IDEA) to consider a student's need for assistive technology (AT). Despite this legal requirement, AT supports are often not available to students with disabilities. Many students with disabilities and their families have addressed the…

  18. The Effects of Computer-Assisted Feedback Strategies in Technology Education: A Comparison of Learning Outcomes

    Science.gov (United States)

    Adams, Ruifang Hope; Strickland, Jane

    2012-01-01

    This study investigated the effects of computer-assisted feedback strategies that have been utilized by university students in a technology education curriculum. Specifically, the study examined the effectiveness of the computer-assisted feedback strategy "Knowledge of Response feedback" (KOR), and the "Knowledge of Correct Responses feedback"…

  19. Definition of technology development missions for early Space Station satellite servicing. Volume 2: Technical

    Science.gov (United States)

    Cable, D. A.; Diewald, C. A.; Hills, T. C.; Parmentier, T. J.; Spencer, R. A.; Stone, G. E.

    1984-01-01

    Volume 2 contains the Technical Report of the approach and results of the Phase 2 study. The phase 2 servicing study was initiated in June 1983, and is being reported in this document. The scope of the contract was to: (1) define in detail five selected technology development missions (TDM); (2) conduct a design requirement analysis to refine definitions of satellite servicing requirements at the space station; and (3) develop a technology plan that would identify and schedule prerequisite precursor technology development, associated. STS flight experiments and space station experiments needed to provide onorbit validation of the evolving technology.

  20. Radiation technology in the Philippines

    International Nuclear Information System (INIS)

    Cabalfin, E.G.

    1994-01-01

    This report was presented during the Second National Coordinators Meeting for radiation technology, held in Vietnam, 21-25 November 1994. The report was about the research and development work in the field of radiation technology at the Philippine Nuclear Research Institute. Transfer of technology in the Philippines can be very difficult without the technical assistance of the IAEA. A multipurpose irradiation facility was set up that encouraged the interest of local industry in radiation sterilization and food irradiation. Also research and development on radiation vulcanization of natural rubber latex has been initiated and the interest in wood plastic combinations has been revived. 1 tab