WorldWideScience

Sample records for technology surveillance-united states

  1. Malaria Surveillance - United States, 2014.

    Science.gov (United States)

    Mace, Kimberly E; Arguin, Paul M

    2017-05-26

    Malaria in humans is caused by intraerythrocytic protozoa of the genus Plasmodium. These parasites are transmitted by the bite of an infective female Anopheles mosquito. The majority of malaria infections in the United States occur among persons who have traveled to regions with ongoing malaria transmission. However, malaria is occasionally acquired by persons who have not traveled out of the country through exposure to infected blood products, congenital transmission, laboratory exposure, or local mosquitoborne transmission. Malaria surveillance in the United States is conducted to identify episodes of local transmission and to guide prevention recommendations for travelers. This report summarizes cases in persons with onset of illness in 2014 and trends during previous years. Malaria cases diagnosed by blood film, polymerase chain reaction, or rapid diagnostic tests are reported to local and state health departments by health care providers or laboratory staff. Case investigations are conducted by local and state health departments, and reports are transmitted to CDC through the National Malaria Surveillance System, National Notifiable Diseases Surveillance System, or direct CDC consultations. CDC conducts antimalarial drug resistance marker testing on blood samples submitted by health care providers or local or state health departments. Data from these reporting systems serve as the basis for this report. CDC received reports of 1,724 confirmed malaria cases, including one congenital case and two cryptic cases, with onset of symptoms in 2014 among persons in the United States. The number of confirmed cases in 2014 is consistent with the number of confirmed cases reported in 2013 (n = 1,741; this number has been updated from a previous publication to account for delayed reporting for persons with symptom onset occurring in late 2013). Plasmodium falciparum, P. vivax, P. ovale, and P. malariae were identified in 66.1%, 13.3%, 5.2%, and 2.7% of cases, respectively

  2. Abortion Surveillance - United States, 2013.

    Science.gov (United States)

    Jatlaoui, Tara C; Ewing, Alexander; Mandel, Michele G; Simmons, Katharine B; Suchdev, Danielle B; Jamieson, Denise J; Pazol, Karen

    2016-11-25

    Since 1969, CDC has conducted abortion surveillance to document the number and characteristics of women obtaining legal induced abortions in the United States. 2013. Each year, CDC requests abortion data from the central health agencies of 52 reporting areas (the 50 states, the District of Columbia, and New York City). The reporting areas provide this information voluntarily. For 2013, data were received from 49 reporting areas. For trend analysis, abortion data were evaluated from 47 areas that reported data every year during 2004-2013. Census and natality data, respectively, were used to calculate abortion rates (number of abortions per 1,000 women) and ratios (number of abortions per 1,000 live births). A total of 664,435 abortions were reported to CDC for 2013. Of these abortions, 98.2% were from the 47 reporting areas that provided data every year during 2004-2013. Among these 47 reporting areas, the abortion rate for 2013 was 12.5 abortions per 1,000 women aged 15-44 years, and the abortion ratio was 200 abortions per 1,000 live births. From 2012 to 2013, the total number, rate, and ratio of reported abortions decreased 5%. From 2004 to 2013, the total number, rate, and ratio of reported abortions decreased 20%, 21%, and 17%, respectively. In 2013, all three measures reached their lowest level for the entire period of analysis (2004-2013). In 2013 and throughout the period of analysis, women in their 20s accounted for the majority of abortions and had the highest abortion rates; women in their 30s and older accounted for a much smaller percentage of abortions and had lower abortion rates. In 2013, women aged 20-24 and 25-29 years accounted for 32.7% and 25.9% of all abortions, respectively, and had abortion rates of 21.8 and 18.2 abortions per 1,000 women aged 20-24 and 25-29 years, respectively. In contrast, women aged 30-34, 35-39, and ≥40 years accounted for 16.8%, 9.2%, and 3.6% of all abortions, respectively, and had abortion rates of 11.8, 7.0, and 2

  3. Abortion Surveillance - United States, 2012.

    Science.gov (United States)

    Pazol, Karen; Creanga, Andreea A; Jamieson, Denise J

    2015-11-27

    Since 1969, CDC has conducted abortion surveillance to document the number and characteristics of women obtaining legal induced abortions in the United States. 2012. Each year, CDC requests abortion data from the central health agencies of 52 reporting areas (the 50 states, the District of Columbia, and New York City). The reporting areas provide this information voluntarily. For 2012, data were received from 49 reporting areas. For trend analysis, abortion data were evaluated from 47 areas that reported data every year during 2003-2012. Census and natality data, respectively, were used to calculate abortion rates (number of abortions per 1,000 women) and ratios (number of abortions per 1,000 live births). A total of 699,202 abortions were reported to CDC for 2012. Of these abortions, 98.4% were from the 47 reporting areas that provided data every year during 2003-2012. Among these same 47 reporting areas, the abortion rate for 2012 was 13.2 abortions per 1,000 women aged 15-44 years, and the abortion ratio was 210 abortions per 1,000 live births. From 2011 to 2012, the total number and ratio of reported abortions decreased 4% and the abortion rate decreased 5%. From 2003 to 2012, the total number, rate, and ratio of reported abortions decreased 17%, 18%, and 14%, respectively, and reached their lowest level in 2012 for the entire period of analysis (2003-2012). In 2012 and throughout the period of analysis, women in their 20s accounted for the majority of abortions and had the highest abortion rates; women in their 30s and older accounted for a much smaller percentage of abortions and had lower abortion rates. In 2012, women aged 20-24 and 25-29 years accounted for 32.8% and 25.4% of all abortions, respectively, and had abortion rates of 23.3 and 18.9 abortions per 1,000 women aged 20-24 and 25-29 years, respectively. In contrast, women aged 30-34, 35-39, and ≥40 years accounted for 16.4%, 9.1%, and 3.7% of all abortions, respectively, and had abortion rates of

  4. Abortion surveillance--United States, 2009.

    Science.gov (United States)

    Pazol, Karen; Creanga, Andreea A; Zane, Suzanne B; Burley, Kim D; Jamieson, Denise J

    2012-11-23

    Since 1969, CDC has conducted abortion surveillance to document the number and characteristics of women obtaining legal induced abortions in the United States. 2009. Each year, CDC requests abortion data from the central health agencies of 52 reporting areas (the 50 states, the District of Columbia, and New York City). The reporting areas provide this information voluntarily. For 2009, data were received from 48 reporting areas. For the purpose of trend analysis, abortion data were evaluated from the 45 areas that reported data every year during 2000-2009. Census and natality data, respectively, were used to calculated abortion rates (number of abortions per 1,000 women) and ratios (number of abortions per 1,000 live births). A total of 784,507 abortions were reported to CDC for 2009. Of these abortions, 772,630 (98.5%) were from the 45 reporting areas that provided data every year during 2000-2009. Among these same 45 reporting areas, the abortion rate for 2009 was 15.1 abortions per 1,000 women aged 15-44 years, and the abortion ratio was 227 abortions per 1,000 live births. Compared with 2008, the total number and rate of reported abortions for 2009 decreased 5%, representing the largest single year decrease for the entire period of analysis. The abortion ratio decreased 2%. From 2000 to 2009, the total number, rate, and ratio of reported abortions decreased 6%, 7%, and 8%, respectively, to the lowest levels for 2000-2009. In 2009 and throughout the period of analysis, women in their 20s accounted for the majority of abortions and had the highest abortion rates, whereas women aged ≥30 years accounted for a much smaller percentage of abortions and had lower abortion rates. In 2009, women aged 20-24 and 25-29 years accounted for 32.7% and 24.4% of all abortions, respectively, and had an abortion rate of 27.4 abortions per 1,000 women aged 20-24 years and 20.4 abortions per 1,000 women aged 25-29 years. In contrast, women aged 30-34, 35-39, and ≥40 years

  5. Youth Risk Behavior Surveillance--United States, 2005

    Science.gov (United States)

    Eaton, Danice K.; Kann, Laura; Kinchen, Steve; Ross, James; Hawkins, Joseph; Harris, William A.; Lowry, Richard; McManus, Tim; Chyen, David; Shanklin, Shari; Lim, Connie; Grunbaum, Jo Anne; Wechsler, Howell

    2006-01-01

    In the United States, 71% of all deaths among persons aged 10-24 years result from 4 causes: motor vehicle crashes, other unintentional injuries, homicide, and suicide. Results from the 2005 national Youth Risk Behavior Survey (YRBS) indicated that during the 30 days preceding the survey, many high school students engaged in behaviors that…

  6. International Disease Surveillance: United States Government Goals and Paths Forward

    Science.gov (United States)

    2010-06-01

    mil $68.3 mil $55.0 mil $186.3 mil DoD Total $234.7 mil $201.6 mil $239.7 mil $676.0 mil State/ USAID Biosecurity Engagement Program ( BEP )5 $27.0...Engagement Program ( BEP ) aims to develop cooperative international programs that promote the secure, safe, and responsible use of biological materials that

  7. Youth Risk Behavior Surveillance--United States, 2013. Morbidity and Mortality Weekly Report (MMWR). Surveillance Summaries. Volume 63, Number SS-4

    Science.gov (United States)

    Kann, Laura; Kinchen, Steve; Shanklin, Shari L.; Flint, Katherine H.; Hawkins, Joseph; Harris, William A.; Lowry, Richard; Olsen, Emily O'Malley; McManus, Tim; Chyen, David; Whittle, Lisa; Taylor, Eboni; Demissie, Zewditu; Brener, Nancy; Thornton, Jemekia; Moore, John; Zaza, Stephanie

    2014-01-01

    Problem: Priority health-risk behaviors contribute to the leading causes of morbidity and mortality among youth and adults. Population-based data on these behaviors at the national, state, and local levels can help monitor the effectiveness of public health interventions designed to protect and promote the health of youth nationwide. Reporting…

  8. State Technologies Advancement Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    David S. Terry

    2012-01-30

    The U. S. Department of Energy (DOE), National Association of State Energy Officials (NASEO), and Association of State Energy Research and Technology Transfer Institutions (ASERTTI) signed an intergovernmental agreement on November 14, 2002, that allowed states and territories and the Federal Government to better collaborate on energy research, development, demonstration and deployment (RDD&D) projects. The agreement established the State Technologies Advancement Collaborative (STAC) which allowed the states and DOE to move RDD&D forward using an innovative competitive project selection and funding process. A cooperative agreement between DOE and NASEO served as the contracting instrument for this innovative federal-state partnership obligating funds from DOE's Office of Energy Efficiency and Renewable Energy and Office of Fossil Energy to plan, fund, and implement RDD&D projects that were consistent with the common priorities of the states and DOE. DOE's Golden Field Office provided Federal oversight and guidance for the STAC cooperative agreement. The STAC program was built on the foundation of prior Federal-State efforts to collaborate on and engage in joint planning for RDD&D. Although STAC builds on existing, successful programs, it is important to note that it was not intended to replace other successful joint DOE/State initiatives such as the State Energy Program or EERE Special Projects. Overall the STAC process was used to fund, through three competitive solicitations, 35 successful multi-state research, development, deployment, and demonstration projects with an overall average non-federal cost share of 43%. Twenty-two states were awarded at least one prime contract, and organizations in all 50 states and some territories were involved as subcontractors in at least one STAC project. Projects were funded in seven program areas: (1) Building Technologies, (2) Industrial Technologies, (3) Transportation Technologies, (4) Distributed Energy

  9. Beyond counting cases: Public health impacts of national Paediatric Surveillance Units

    NARCIS (Netherlands)

    Grenier, D.; Elliott, E.J.; Zurynski, Y.; Rodrigues Pereira, R.; Preece, M.; Lynn, R.; Kries, R. von; Zimmermann, H.; Dickson, N.P.; Virella, D.

    2007-01-01

    Paediatric Surveillance Units (PSUs) have been established in 14 countries and facilitate national, prospective, active surveillance for a range of conditions, with monthly reporting by child health specialists. The International Network of Paediatric Surveillance Units (INoPSU) was established in 1

  10. State perspectives on clean coal technology deployment

    Energy Technology Data Exchange (ETDEWEB)

    Moreland, T. [State of Illinois Washington Office, Washington, DC (United States)

    1997-12-31

    State governments have been funding partners in the Clean Coal Technology program since its beginnings. Today, regulatory and market uncertainties and tight budgets have reduced state investment in energy R and D, but states have developed program initiatives in support of deployment. State officials think that the federal government must continue to support these technologies in the deployment phase. Discussions of national energy policy must include attention to the Clean Coal Technology program and its accomplishments.

  11. Design of a radiation surveillance unit for an unmanned aerial vehicle.

    Science.gov (United States)

    Kurvinen, K; Smolander, P; Pöllänen, R; Kuukankorpi, S; Kettunen, M; Lyytinen, J

    2005-01-01

    This paper describes a prototype of a compact environmental radiation surveillance instrument designed for a Ranger unmanned aerial vehicle. The instrument, which can be used for tracking a radioactive plume, mapping fallout and searching for point sources, consists of three different detector types (GM, NaI(Tl) and CZT) and an air sampling unit. In addition to the standard electronics for data acquisition, the system contains an onboard computer, a GPS receiver and environmental sensors, all enclosed in a single housing manufactured of fiberglass-reinforced composite material. The data collected during the flight is transmitted in real-time to the ground station via a TETRA radio network. The radiation surveillance unit is an independent module and as such can be used in, for example, airplanes, helicopters and cars.

  12. TECHNOLOGIES IN IMO STATE, NIGERIA

    African Journals Online (AJOL)

    adoption of improved cassava production technologies, while age was ... But the adoption of innovation ... and agronomic benefits from adoption (Asiabaka, 1994;. Nweke .... towards agricultural innovations encourages the adoption of farm ...

  13. Mobile surveillance units (MSU) for border protection of the enlarged economic union

    Science.gov (United States)

    Crandon, Christopher

    2004-12-01

    During the last 12 years the European Union (EU) has financed the new member applicant countries of Central and Eastern Europe in their preparation for joining the EU. Based on this enlargement of the EU, funding for Cross Border Protection has been made available from the overall infrastructure improvement budget. Border protection was required in areas where border conflicts had taken place and to limit Illegal Immigration (II) and smuggling. After 9/11/2001, defence against terrorist activities will no doubt be added to the requirement. This paper describes the approach taken in the design of the latest "containerised" police and para military Mobile Surveillance Units (MSUs). This approach may also be considered for Homeland Security initiatives. These MSU's utilise standard road vehicles, and off-road variants, converted to use high performance military thermal imagers, such as SiGMA. In future the current, in service, MSUs will require increased sensor integration and networking to cover land and coastal borders. The underlying key is affordability for the police and para-military markets whilst retaining the highest performance derived from the latest SFPA military standard thermal imagers.

  14. Solid-state lighting technology perspective.

    Energy Technology Data Exchange (ETDEWEB)

    Tsao, Jeffrey Yeenien; Coltrin, Michael Elliott

    2006-08-01

    Solid-State Lighting (SSL) uses inorganic light-emitting diodes (LEDs) and organic light-emitting diodes (OLEDs) to convert electricity into light for illumination. SSL has the potential for enormous energy savings and accompanying environmental benefits if its promise of 50% (or greater) energy efficiencies can be achieved. This report provides a broad summary of the technologies that underlie SSL. The applications for SSL and potential impact on U.S. and world-wide energy consumption, and impact on the human visual experience are discussed. The properties of visible light and different technical metrics to characterize its properties are summarized. The many factors contributing to the capital and operating costs for SSL and traditional lighting sources (incandescent, fluorescent, and high-intensity discharge lamps) are discussed, with extrapolations for future SSL goals. The technologies underlying LEDs and OLEDs are also described, including current and possible alternative future technologies and some of the present limitations.

  15. INTERSUBJECTIVE TECHNOLOGIES OF THE STATE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    M. R. Arpentieva

    2016-01-01

    Full Text Available This paper analyzes the features of intersubjective technology governance. Intersubjective technologies of the state management usually refers to a particular perception of the aims and means management. Discusses the distinctive features and advantages of intersubjective technology governance, formulated on the basis evergetical model of governance. It is noted that polylogical or multi-factorial, a fully decentralized network management and training, other spheres of human life are superior in speed and quality of decisions monologue: the involvement of citizens including civil society to control state can not only reduce tensions between classes and groups, guiding and monolith citizens, but also with time to abandon the usual forms of government in favor of intersubjective control. Evergetics comes from the «superposition» of subject and object management, the «heterogeneity» of the communities and actors, and as researchers and as subjects involved in the decision-making entity and creates, and knows the world: the actor is «inside» the object (society and communicates with other actors in General for their bad life situations. Submission evergetics on productivity on multi-agent and multi-actor management technologies can serve as the basis for building typology and the development of common intersubjective scheme of government.

  16. Development of Solid State Laser Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Byung Heon; Kwon, Seong Ok; Kim, Yong Ki (and others)

    2007-04-15

    Recently, diode-pumped solid state lasers(DPSSL) have been developed to have a diffraction limited beam quality and high average output powers beyond kW. The lifetime extends to have several thousand hours. Due to such merits, the DPSSLs are now replacing previous application fields of CO{sub 2} laser, lamp-pumped solid-state lasers, Excimer laser, etc. The DPSSLs have broad application fields, such as laser spectroscopy and analysis, laser micromachining, precision measurement, laser range findings, laser pump sources, medical lasers, etc. In this project, various DPSSLs are developed for use in laser isotope production. Many new laser modules are designed and used to develop high power pulsed IR lasers and green lasers. In addition, a quasi CW driven compact DPSSL is developed to have high pulse energy DPSSL technologies.

  17. DoD Current State for Software Technology Readiness Assessments

    Science.gov (United States)

    2010-04-01

    DoD Current State for Software Technology Readiness Assessments Systems & Software Technology Conference April 2010 Cynthia Dion-Schwarz, Ph.D...DoD Current State for Software Technology Readiness Assessments 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d...public release; distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the 22nd Systems and Software Technology Conference (SSTC), 26-29 April

  18. Youth Risk Behavior Surveillance--United States, 2009. Morbidity and Mortality Weekly Report. Surveillance Summaries. Volume 59, Number SS-5

    Science.gov (United States)

    Eaton, Danice K.; Kann, Laura; Kinchen, Steve; Shanklin, Shari; Ross, James; Hawkins, Joseph; Harris, William A.; Lowry, Richard; McManus, Tim; Chyen, David; Lim, Connie; Whittle, Lisa; Brener, Nancy D.; Wechsler, Howell

    2010-01-01

    Problem: Priority health-risk behaviors, which are behaviors that contribute to the leading causes of morbidity and mortality among youth and adults, often are established during childhood and adolescence, extend into adulthood, and are interrelated and preventable. Reporting Period Covered: September 2008-December 2009. Description of the…

  19. Youth Risk Behavior Surveillance--United States, 2007. Morbidity and Mortality Weekly Report. Surveillance Summaries. Volume 57, Number SS-4

    Science.gov (United States)

    Eaton, Danice K.; Kann, Laura; Kinchen, Steve; Shanklin, Shari; Ross, James; Hawkins, Joseph; Harris, William A.; Lowry, Richard; McManus, Tim; Chyen, David; Lim, Connie; Brener, Nancy D.; Wechsler, Howell

    2008-01-01

    Problem: Priority health-risk behaviors, which are behaviors that contribute to the leading causes of morbidity and mortality among youth and adults, often are established during childhood and adolescence, extend into adulthood, are interrelated, and are preventable. Reporting Period Covered: January-December 2007. Description of the System: The…

  20. Youth Risk Behavior Surveillance--United States, 2011. Morbidity and Mortality Weekly Report. Surveillance Summaries. Volume 61, Number 4

    Science.gov (United States)

    Eaton, Danice K.; Kann, Laura; Kinchen, Steve; Shanklin, Shari; Flint, Katherine H.; Hawkins, Joseph; Harris, William A.; Lowry, Richard; McManus, Tim; Chyen, David; Whittle, Lisa; Lim, Connie; Wechsler, Howell

    2012-01-01

    Problem: Priority health-risk behaviors, which are behaviors that contribute to the leading causes of morbidity and mortality among youth and adults, often are established during childhood and adolescence, extend into adulthood, and are interrelated and preventable. Reporting Period Covered: September 2010-December 2011. Description of the…

  1. Youth Risk Behavior Surveillance--United States, 2005. Morbidity and Mortality Weekly Report. Surveillance Summaries. Volume 55, Number SS-5

    Science.gov (United States)

    Eaton, Danice K.; Kann, Laura; Kinchen, Steve; Ross, James; Hawkins, Joseph; Harris, William A.; Lowry, Richard; McManus, Tim; Chyen, David; Shanklin, Shari; Lim, Connie; Grunbaum, Jo Anne; Wechsler, Howell

    2006-01-01

    Problem: Priority health-risk behaviors, which contribute to the leading causes of morbidity and mortality among youth and adults, often are established during childhood and adolescence, extend into adulthood, are interrelated, and are preventable. Reporting Period Covered: October 2004-January 2006. Description of the System: The Youth Risk…

  2. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  3. STEM: Science Technology Engineering Mathematics. State-Level Analysis

    Science.gov (United States)

    Carnevale, Anthony P.; Smith, Nicole; Melton, Michelle

    2011-01-01

    The science, technology, engineering, and mathematics (STEM) state-level analysis provides policymakers, educators, state government officials, and others with details on the projections of STEM jobs through 2018. This report delivers a state-by-state snapshot of the demand for STEM jobs, including: (1) The number of forecast net new and…

  4. 1:1 Technology and Computerized State Assessments

    Science.gov (United States)

    Medlin, Shane A.

    2016-01-01

    American students in the 21st century are growing up with Internet accessible technology available at their fingertips. Considering this and the continued pressure to compete in a global society, The United States' Department of Education's National Education Technology Plan (NETP) (2010) calls for educators to leverage technology in order to…

  5. Teacher Technology Use and State Accountability Scores: A Correlational Study

    Science.gov (United States)

    Borjes, Robert L.

    2012-01-01

    This was an exploratory study that sought to find a positive correlation between teachers' perceived use of technology and successful test scores as measured by state indicators. As more districts purchase expensive technology to assist teachers in reaching the lofty goals set by the state, it is important for administrators and local school board…

  6. The State Prize for 1991 Science and Technology Advance

    Institute of Scientific and Technical Information of China (English)

    LINantion; FENGYilun

    1992-01-01

    According to the report in Science and Technology Daily on 10 July 1991, prize winners for the State Prize for 1991 Science and Technology Advance in China have been selected by the Evaluation Committee of the State Prize for 1991 Science and Technology Advance. Among the prizes, eight programs were concerned with rice research: Pathogenetic Types of Rice Bacterial Leaf Blight in China and the Application in Disease-resistant Breeding, by FANG Zhongda,

  7. Comparison of State-Funded Technology Maturation Programs.

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Elizabeth James Kistin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Warren, Drake [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hess, Marguerite Evelyn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-12-01

    This study examines the structure and impact of state-funded technology maturation programs that leverage research institutions for economic development throughout the United States. The lessons learned and practices identified from previous experiences will inform Sandia National Laboratories' Government Relations and Technology Partnerships teams as they participate in near-term discussions about the proposed Technology Readiness Gross Receipts Tax Credit and Program, and continue to shape longer-term program and partnership opportunities. This Page Intentionally Left Blank

  8. Adult Education Technology in the Golden State.

    Science.gov (United States)

    Fleischman, John; Kilbert, Gerald H.

    1993-01-01

    Educational technology applications in California include (1) OTAN's Online Communication System--electronic mail and an information database; (2) Educard, a computer chip card for storing and retrieving student information; and (3) staff development via satellite in Los Angeles County Schools' Educational Telecommunications Network. (SK)

  9. Biomanufacturing : a state of the technology review.

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, Sarah Anne (East Texas Baptist University, Marshall, TX); Colon, Silverio C. (Arizona State University, Tempe, AZ); Myers, Ramona Lynn; Emerson, John Allen; Ruffner, Judith Alison

    2003-09-01

    Biomanufacturing has the potential to be one of the defining technologies in the upcoming century. Research, development, and applications in the fields of biotechnology, bioengineering, biodetection, biomaterials, biocomputation and bioenergy will have dramatic impact on both the products we are able to create, and the ways in which we create them. In this report, we examine current research trends in biotechnology, identify key areas where biomanufacturing will likely be a major contributing field, and report on recent developments and barriers to progress in key areas.

  10. Economics of alternative palm oil processing technologies in Imo State

    African Journals Online (AJOL)

    Economics of alternative palm oil processing technologies in Imo State. ... This study was designed to analyse the costs and returns of alternative palm oil processing ... Output of Palm oil and consequently net returns would increase if palm oil ...

  11. The Status of Basic Technology in Cross River State Junior ...

    African Journals Online (AJOL)

    info

    Copyright © IAARR, 2007-2016: www.afrrevjo.net. Indexed African ... instructional materials for teaching basic technology in junior secondary school in. Cross River State and .... resource utilization. Conference paper, Nigeria Audio – visual.

  12. RUSSIAN FEDERATION STATE PRIZE IN SCIENCE AND TECHNOLOGY FOR 2009

    OpenAIRE

    2010-01-01

    The Russian Federation State Prize in the field of Science and Technology for 2009 for "A Set of Scientific Works on the Development of Laser and Information Technologies in Medicine" (Presidential Decree N° 678, dated June 6th, 2010) was awarded jointly to Doctor of Physical and Mathematical Sciences, Academician of the Russian Academy of Sciences, Director of the Institute of Laser and Information Technologies, Russian Academy of Sciences, V. Ya. Panchenko; to Doctor of Medical Sciences, Ac...

  13. The State of Information and Communication Technology in Iran

    Directory of Open Access Journals (Sweden)

    Mohsen Gerami

    2010-03-01

    Full Text Available The development of information and communicationtechnologies depend on several factors like government policythat encourage investors to spend their money in building ITinfrastructure and force business or particular institution toadopt the new technologies to bring the price down and manyothers. This paper investigates the state of Information andCommunication Technology in Iran.

  14. Sensors and Technologies in Spain: State-of-the-Art

    Directory of Open Access Journals (Sweden)

    Gonzalo Pajares

    2014-08-01

    Full Text Available The aim of this special issue was to provide a comprehensive view on the state-of-the-art sensor technology in Spain. Different problems cause the appearance and development of new sensor technologies and vice versa, the emergence of new sensors facilitates the solution of existing real problems. [...

  15. Federal/State Jurisdictional Split: Implications for Emerging Electricity Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, Jeffery S. [Akin Gump Strauss Hauer & Feld LLP, Washington, DC (United States); Kelly, Suedeen G. [Akin Gump Strauss Hauer & Feld LLP, Washington, DC (United States); Nordhaus, Robert R. [Van Ness Feldman, LLP, Washington, DC (United States); Smith, Douglas W. [Van Ness Feldman, LLP, Washington, DC (United States)

    2016-12-01

    The first Administration-wide Quadrennial Energy Review (QER), released in April 2015, found that the “interacting and overlapping” division of authority between “federal, regional and state institutions and regulatory structures” for the electricity sector could “impede development of the grid of the future [and] . . . the development of markets that efficiently integrate” new and emerging technologies.1 While “technology is indifferent to state-Federal boundaries and jurisdictions,” the QER explained, “technology users cannot be.”2 The report concluded that “[b]oth Federal and state governments need to play constructive and collaborative roles in the future to ensure that consumers and industry are able to maximize the value of new technologies.”3 The QER recommended that the Department of Energy (“DOE”) facilitate such collaboration by playing a “convening role” to bring together state and federal regulators and other stakeholders to consider these issues.4 This paper provides background and analysis on these jurisdictional issues and the impact they may have on adoption of emerging energy technologies and coordination of markets for those technologies, in support of future dialogs on these subjects. In particular, this paper reviews the structure of the Federal Power Act (“FPA”),5 and compares the division of authority between the federal and state governments adopted there with other federal energy and energy-related statutes.

  16. Applications and Technologies of All-Solid State Blue Laser

    Institute of Scientific and Technical Information of China (English)

    JING Zhuo; XUE Jun-wen; JIA Fu-qiang; ZHENG Quan; YE Zi-qing

    2006-01-01

    @@ 1 Introduction Along with the matureness of laser diode (LD) manufacturing technology, the performance of LD has been improved greatly since 1980s, so various kinds of laser devices based on LD have been developed rapidly, especially the all-solid state lasers. After early experiments and researches, the all-solid state lasers have been commercialized successfully.

  17. Proposal for a state health technology assessment program.

    Science.gov (United States)

    Colmenares, Phil

    2012-08-01

    Evidence suggests that a significant number of medical technologies are of little or no benefit to patients. Under current budgetary pressures, state health care programs cannot afford continued spending on unnecessary medical care without further cuts in enrollment. Limiting coverage of high-tech care only to indications supported by good clinical evidence would help save state health care dollars. However, there is currently no public process to formally evaluate new medical interventions in Wisconsin. In fact, new therapies often are introduced into clinical practice, and covered by state health insurance programs, even when there is weak or questionable evidence of clinical effectiveness. This article proposes the creation of a state Health Technology Assessment program in Wisconsin to systematically evaluate new tests or treatments, and to promote evidence-based coverage decisions. Such a program would help limit wasteful spending on unnecessary technologies, reinforce good clinical practice, and protect patients from the risks of interventions that have not been proven effective.

  18. The United States Department of Energy Office of Industrial Technology`s Technology Benefits Recording System

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, K.R.; Moore, N.L.

    1994-09-01

    The U.S. Department of Energy (DOE) Office of Industrial Technology`s (OIT`s) Technology Benefits Recording System (TBRS) was developed by Pacific Northwest Laboratory (PNL). The TBRS is used to organize and maintain records of the benefits accrued from the use of technologies developed with the assistance of OIT. OIT has had a sustained emphasis on technology deployment. While individual program managers have specific technology deployment goals for each of their ongoing programs, the Office has also established a separate Technology Deployment Division whose mission is to assist program managers and research and development partners commercialize technologies. As part of this effort, the Technology Deployment Division developed an energy-tracking task which has been performed by PNL since 1977. The goal of the energy-tracking task is to accurately assess the energy savings impact of OIT-developed technologies. In previous years, information on OIT-sponsored technologies existed in a variety of forms--first as a hardcopy, then electronically in several spreadsheet formats that existed in multiple software programs. The TBRS was created in 1993 for OIT and was based on information collected in all previous years from numerous industrial contacts, vendors, and plants that have installed OIT-sponsored technologies. The TBRS contains information on technologies commercialized between 1977 and the present, as well as information on emerging technologies in the late development/early commercialization stage of the technology life cycle. For each technology, details on the number of units sold and the energy saved are available on a year-by-year basis. Information regarding environmental benefits, productivity and competitiveness benefits, or impact that the technology may have had on employment is also available.

  19. Solid-State Nanopore-Based DNA Sequencing Technology

    Directory of Open Access Journals (Sweden)

    Zewen Liu

    2016-01-01

    Full Text Available The solid-state nanopore-based DNA sequencing technology is becoming more and more attractive for its brand new future in gene detection field. The challenges that need to be addressed are diverse: the effective methods to detect base-specific signatures, the control of the nanopore’s size and surface properties, and the modulation of translocation velocity and behavior of the DNA molecules. Among these challenges, the realization of the high-quality nanopores with the help of modern micro/nanofabrication technologies is a crucial one. In this paper, typical technologies applied in the field of solid-state nanopore-based DNA sequencing have been reviewed.

  20. The solid state detector technology for picosecond laser ranging

    Science.gov (United States)

    Prochazka, Ivan

    1993-01-01

    We developed an all solid state laser ranging detector technology, which makes the goal of millimeter accuracy achievable. Our design and construction philosophy is to combine the techniques of single photon ranging, ultrashort laser pulses, and fast fixed threshold discrimination while avoiding any analog signal processing within the laser ranging chain. The all solid state laser ranging detector package consists of the START detector and the STOP solid state photon counting module. Both the detectors are working in an optically triggered avalanche switching regime. The optical signal is triggering an avalanche current buildup which results in the generation of a uniform, fast risetime output pulse.

  1. Technology in precision viticulture: a state of the art review

    Directory of Open Access Journals (Sweden)

    Matese A

    2015-05-01

    Full Text Available Alessandro Matese,1 Salvatore Filippo Di Gennaro1,2 1Institute of Biometeorology, National Research Council (IBIMET-CNR, Florence, Italy; 2Department of Agricultural, Food and Environmental Sciences, University of Perugia, Perugia, Italy Abstract: Precision viticulture aims to maximize the oenological potential of vineyards. This is especially true in regions where the high quality standards of wine production justify the adoption of site-specific management practices to simultaneously increase both quality and yield. The introduction of new technologies for supporting vineyard management allows the efficiency and quality of production to be improved and, at the same time, reduces the environmental impact. The rapid evolution of information communication technologies and geographical science offers enormous potential for the development of optimized solutions for distributed information for precision viticulture. Recent technological developments have allowed useful tools to be elaborated that help in the monitoring and control of many aspects of vine growth. Precision viticulture thus seeks to exploit the widest range of available observations to describe the vineyard spatial variability with high resolution, and provide recommendations to improve management efficiency in terms of quality, production, and sustainability. This review presents a brief outline of state of the art of technologies in precision viticulture. It is divided in two sections, the first focusing on monitoring technologies such as geolocating and remote and proximal sensing; the second focuses on variable-rate technologies and the new agricultural robots. Keywords: remote sensing, proximal sensing, variable-rate technology, robot 

  2. Solar sail technology-A state of the art review

    Science.gov (United States)

    Fu, Bo; Sperber, Evan; Eke, Fidelis

    2016-10-01

    In this paper, the current state of the art of solar sail technology is reviewed. Solar sail research is quite broad and multi-disciplinary; this paper focuses mainly on areas such as solar sail dynamics, attitude control, design and deployment, and mission and trajectory analysis. Special attention is given to solar radiation pressure force modeling and attitude dynamics. Some basics of solar sailing which would be very useful for a new investigator in the area are also presented. Technological difficulties and current challenges in solar sail system design are identified, and possible ideas for future research in the field are also discussed.

  3. Modelling and simulation SSM: latest state of the art technology

    CSIR Research Space (South Africa)

    Jahajeeah, N

    2005-10-01

    Full Text Available during filling stage Supporting the Manufacturing and Materials Industry in its quest for global competitiveness ? Shear rate history important factor in design and casting processes ? Viscosity decreases over time after applied shear rate ? Ideally... and Materials Industry in its quest for global competitiveness Modelling and Simulation SSM Latest state of the art technology N Jahajeeah Supporting the Manufacturing and Materials Industry in its quest for global competitiveness BEHAVIOUR OF THIXOTROPIC...

  4. SYRUPS: COMPOSITION, TECHNOLOGY, CURRENT STATE OF RESEARCH (REVIEW

    Directory of Open Access Journals (Sweden)

    M. E. Kim

    2014-01-01

    Full Text Available The overview data for the syrups formulation, including syrups for children, with synthetic substances were represented: assortment, composition, technological approach. The advantages and disadvantages of this dosage form were described. Details considered flavoring agents and other auxiliaries (stabilizers, preservatives, thickeners comprising syrups were closely examined. The issues of current research state of syrups for children were described.

  5. 34 CFR 403.1 - What is the State Vocational and Applied Technology Education Program?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What is the State Vocational and Applied Technology... TECHNOLOGY EDUCATION PROGRAM General § 403.1 What is the State Vocational and Applied Technology Education Program? (a) Under the State Vocational and Applied Technology Education Program, the Secretary...

  6. #2) Sensor Technology-State of the Science | Science ...

    Science.gov (United States)

    Establish market surveys of commercially-available air quality sensorsConduct an extensive literature survey describing the state of sensor technologiesInvestigate emerging technologies and their potential to meet future air quality monitoring needs for the Agency as well as other partners/stakeholders Develop sensor user guidesEducate sensor developers/sensors users on the state of low cost censorsFacilitate knowledge transfer to Federal/Regional/State air quality associatesWork directly with sensor developers to dramatically speed up the development of next generation air monitoring Support ORD’s Sensor Roadmap by focusing on areas of highest priority (NAAQS, Air Toxics, Citizen Science)Establish highly integrated research efforts across ORD and its partners (internal/external) to ensure consistent The National Exposure Research Laboratory (NERL) Human Exposure and Atmospheric Sciences Division (HEASD) conducts research in support of EPA mission to protect human health and the environment. HEASD research program supports Goal 1 (Clean Air) and Goal 4 (Healthy People) of EPA strategic plan. More specifically, our division conducts research to characterize the movement of pollutants from the source to contact with humans. Our multidisciplinary research program produces Methods, Measurements, and Models to identify relationships between and characterize processes that link source emissions, environmental concentrations, human exposures, and target-tissue dose.

  7. Introduction to the Special Issue on "State-of-the-Art Sensor Technology in Japan 2015".

    Science.gov (United States)

    Tokumitsu, Masahiro; Ishida, Yoshiteru

    2016-08-23

    This Special Issue, "State-of-the-Art Sensor Technology in Japan 2015", collected papers on different kinds of sensing technology: fundamental technology for intelligent sensors, information processing for monitoring humans, and information processing for adaptive and survivable sensor systems.[...].

  8. Wireless Power Transmission Technology State-Of-The-Art

    Science.gov (United States)

    Dickinson, R. M. T.

    2002-01-01

    This first Bill Brown SSP La Crescenta, CA 91214 technology , including microwave and laser systems for the transfer of electric , as related to eventually developing Space Solar Power (SSP) systems. Current and past technology accomplishments in ground based and air and space applied energy conversion devices, systems and modeling performance and cost information is presented, where such data are known to the author. The purpose of the presentation is to discuss and present data to encourage documenting and breaking the current technology records, so as to advance the SOA in WPT for SSP . For example, regarding DC to RF and laser converters, 83% efficient 2.45 GHz cooker-tube magnetrons with 800W CW output have been jointly developed by Russia and US. Over 50% wa11-plug efficient 1.5 kW/cm2 CW, water cooled, multibeam, solid state laser diode bar-arrays have been developed by LLNL at 808 nm wavelength. The Gennans have developed a 36% efficient, kW level, sing1e coherent beam, lateral pumped semiconductor laser. The record for end-to-end DC input to DC output power overall WPT link conversion efficiency is 54% during the Raytheon-JPL experiments in 1975 for 495.6 W recovered at 1.7-mrange at 2.4469 GAz. The record for usefully recovered electric power output ( as contrasted with thennally induced power in structures) is 34 kW OC output at a range of 1.55 km, using 2.388 GHz microwaves, during the JPL- Raytheon experiments by Bill Brown and the author at Goldstone, CA in 1975. The GaAs-diode rectenna array had an average collection-conversion efficiency of 82.5%. A single rectenna element operating a 6W RF input, developed by Bill Brown demonstrated 91.4% efficiency. The comparable record for laser light to OC output power conversion efficiency of photovoltaics is 590/0. for AlGaAs at 1.7 Wand 826nm wavelength. Russian cyclotron-wave converters have demonstrated 80% rectification efficiency at S-band. Concerning WPT technology equipment costs, magnetron conversion

  9. Analyses of Technology for Solid State Coherent Lidar

    Science.gov (United States)

    Amzajerdian, Farzin

    1997-01-01

    Over past few years, considerable advances have been made in the areas of the diode-pumped, eye-safe, solid state lasers and room temperature, wide bandwidth, semiconductor detectors operating in the near-infrared region. These advances have created new possibilities for the development of reliable and compact coherent lidar systems for a wide range of applications. This research effort is aimed at further developing solid state coherent lidar technology for remote sensing of atmospheric processes such as wind, turbulence and aerosol concentration. The work performed by the UAH personnel under this Delivery Order concentrated on design and analyses of laboratory experiments and measurements, and development of advanced lidar optical subsystems in support of solid state laser radar remote sensing systems which are to be designed, deployed, and used to measure atmospheric processes and constituents. Under this delivery order, a lidar breadboard system was designed and analyzed by considering the major aircraft and space operational requirements. The lidar optical system was analyzed in detail using SYNOPSIS and Code V optical design packages. The lidar optical system include a wedge scanner and the compact telescope designed by the UAH personnel. The other major optical components included in the design and analyses were: polarizing beam splitter, routing mirrors, wave plates, signal beam derotator, and lag angle compensator. This lidar system is to be used for demonstrating all the critical technologies for the development of a reliable and low-cost space-based instrument capable of measuring global wind fields. A number of laboratory experiments and measurements were performed at the NASA/MSFC Detector Characterization Facility, previously developed by the UAH personnel. These laboratory measurements include the characterization of a 2-micron InGaAs detectors suitable for use in coherent lidars and characterization of Holographic Optical Element Scanners. UAH

  10. Standardized Testing Program for Solid-State Hydrogen Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Michael A. [Southwest Research Institute; Page, Richard A. [Southwest Research Institute

    2012-07-30

    In the US and abroad, major research and development initiatives toward establishing a hydrogen-based transportation infrastructure have been undertaken, encompassing key technological challenges in hydrogen production and delivery, fuel cells, and hydrogen storage. However, the principal obstacle to the implementation of a safe, low-pressure hydrogen fueling system for fuel-cell powered vehicles remains storage under conditions of near-ambient temperature and moderate pressure. The choices for viable hydrogen storage systems at the present time are limited to compressed gas storage tanks, cryogenic liquid hydrogen storage tanks, chemical hydrogen storage, and hydrogen absorbed or adsorbed in a solid-state material (a.k.a. solid-state storage). Solid-state hydrogen storage may offer overriding benefits in terms of storage capacity, kinetics and, most importantly, safety.The fervor among the research community to develop novel storage materials had, in many instances, the unfortunate consequence of making erroneous, if not wild, claims on the reported storage capacities achievable in such materials, to the extent that the potential viability of emerging materials was difficult to assess. This problem led to a widespread need to establish a capability to accurately and independently assess the storage behavior of a wide array of different classes of solid-state storage materials, employing qualified methods, thus allowing development efforts to focus on those materials that showed the most promise. However, standard guidelines, dedicated facilities, or certification programs specifically aimed at testing and assessing the performance, safety, and life cycle of these emergent materials had not been established. To address the stated need, the Testing Laboratory for Solid-State Hydrogen Storage Technologies was commissioned as a national-level focal point for evaluating new materials emerging from the designated Materials Centers of Excellence (MCoE) according to

  11. Science and technology disclosure in the state of Queretaro: Science and Technology for Children program

    Science.gov (United States)

    Contreras Flores, Rubén; Villeda Muñoz, Gabriel

    2007-03-01

    Science and technology disclosure is an integral part of our scientific work as researches; it is an induction process for children, young people and teachers of primary and secondary schools in the state of Queretaro. Education must be offered in a clear and objective way, it allows to the students apply the acquired knowledge to understand the world and improve his quality of life. Nowadays, the Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada of the Instituto Politecnico Nacional Unidad Queretaro (CICATA-IPN Queretaro) together with the Consejo de Ciencia y Tecnologia del Estado de Queretaro (CONCYTEQ) have implemented the "Science and Technology for Children" program (Ciencia y Tecnologia para Ninos - CTN), it allows to the educative sector obtain information through the CONCYTEQ web page. The fist stage of the program was the development of two subjects: the brochure titled "Petroleum, Nonrenewable Natural Resource that Moves the World" and the manual "Experiments of Physics". At the moment we are working with the second stage of the program, it is about the energy generation using renewable sources such as: geothermal, aeolian, solar and biomass. The CTN program allows to students and teachers to create conscience about the importance of the development of the science of technology in our country.

  12. 34 CFR 403.63 - How does a State carry out the State Vocational and Applied Technology Education Program?

    Science.gov (United States)

    2010-07-01

    ... Applied Technology Education Program? 403.63 Section 403.63 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the Secretary Assist Under... Technology Education Program? (a) Unless otherwise indicated in the regulations in this part, a State...

  13. An Appraisal of Educational Technology Usage in Secondary Schools in Ondo State (Nigeria)

    OpenAIRE

    Olufemi Victor ADEOLUWA; Olukayode Solomon ABODERIN; Oladele Dennis OMODARA

    2013-01-01

    This study examined and appraised the use of Educational Technology in secondary schools in Ondo State South West, Nigeria. The study investigated the level of availability of Educational Technology facilities in schools, attitude of teachers toward educational technology, the perceived benefits of using Educational Technology, the problems facing the use of Educational Technology in secondary schools and Application of Educational Technology in schools by teachers. The descriptive survey des...

  14. National Educational Technology Trends: 2012. State Leadership Empowers Educators, Transforms Teaching and Learning

    Science.gov (United States)

    Duffey, Delia, R.; Fox, Christine

    2012-01-01

    The State Educational Technology Directors Association (SETDA) is the principal association representing the technology leadership in all fifty states, the District of Columbia, the U.S. Virgin Islands, and the Bureau of Indian Affairs. This is SETDA's ninth annual report on select educational technology activities. This year's report includes…

  15. Technology innovation and entrepreneurial state: the development of China's high-speed rail industry

    NARCIS (Netherlands)

    Z. Sun

    2015-01-01

    China proactively promotes indigenous technology innovation towards developing an innovation-based economy. This contradicts the developmental state literature that puts emphasis on technology imitation. Drawn from the strategic entrepreneurship perspective, this article explores the role of the gov

  16. Technology innovation and entrepreneurial state: the development of China's high-speed rail industry

    NARCIS (Netherlands)

    Sun, Z.

    2015-01-01

    China proactively promotes indigenous technology innovation towards developing an innovation-based economy. This contradicts the developmental state literature that puts emphasis on technology imitation. Drawn from the strategic entrepreneurship perspective, this article explores the role of the

  17. Solid State Electrolyte for Li Battery Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration —  The fabrication technology developed in this project will aid GRC in advancing  Lithium Ion Batteries (LIB) technology by developing new electrode and SSE...

  18. ANPD technology survey: The state of NPD practice.

    Science.gov (United States)

    Harper, Mary G; Durkin, Gregory; Orthoefer, Donna Kilcoyne; Powers, Rebekah; Tassinari, Rita M

    2014-01-01

    In 2012, the Association for Nursing Professional Development (ANPD) Educational Technologies Committee surveyed ANPD membership to determine technology usage and education-related needs. Results from over 1,300 members indicated that, overall, technology is not used to its full capacity. Nursing professional development specialists are challenged to develop individual competence in educational technologies, whereas organizations are tasked with demonstrating cost-effective, results-oriented education.

  19. Current State and Development Strategy of CNPC Engineering Technology Service

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Challenges to CNPC engineering technology service Internal contraction and problems (1) Pricing mechanism for technology service. CNPC engineering technology companies have been under deficit for many years after restructuring, and eight subordinate companies lost 239 million RMB in 2008 and even 770 million RMB in 2009.

  20. Diffusion and utilization of scientific and technological knowledge within state and local governments

    Science.gov (United States)

    Feller, I.; Flanary, P. E.

    1979-01-01

    The state-of-the-art is reviewed concerning current knowledge of processes by which technological innovation and scientific information are disseminated among state and local governments. The effectiveness of various mechanisms, strategies, and approaches by which federal agencies have sought to transfer technology to state, regional, and city governments are assessed. It is concluded that the existing relationships between the state and local governments, and the scientific communities are not adequate.

  1. STEM and Technology Education: International State-of-the-Art

    Science.gov (United States)

    Ritz, John M.; Fan, Szu-Chun

    2015-01-01

    This paper reports the perceptions of 20 international technology education scholars on their country's involvement in science, technology, engineering, and mathematics (STEM) education. Survey research was used to obtain data. It was found that the concept of STEM education is being discussed differently by nations. Some consider STEM education…

  2. Current state of OLED technology relative to military avionics requirements

    Science.gov (United States)

    Tchon, Joseph L.; Barnidge, Tracy J.; Hufnagel, Bruce D.; Bahadur, Birendra

    2014-06-01

    The paper will review optical and environmental performance thresholds required for OLED technology to be used on various military platforms. Life study results will be summarized to highlight trends while identifying remaining performance gaps to make this technology viable for future military avionics platforms.

  3. Solid-state microwave switches: Circuitry, manufacturing technologies and development trends. Review (Part 2)

    OpenAIRE

    Berezniak, Anatolii; Korotkov, Alexander S.

    2013-01-01

    This paper presents an overview of the process and design capabilities of state-of-the-art in the field of microwave solid state switches. The paper describes types of solid state switches, switch specifications, a review of technological advances in this area. The overview results indicate that AlGaN/GaN MMICs including solid state switches are realizable.

  4. Solid-state microwave switches: circuitry, manufacturing technologies and development trends. Review (Part 1)

    OpenAIRE

    Berezniak, Anatolii; Korotkov, Alexander S.

    2013-01-01

    This paper presents an overview of the process and design capabilities of state-of-the-art in the field of microwave solid state switches. The paper describes types of solid state switches, switch specifications, a review of technological advances in this area. The overview results indicate that AlGaN/GaN MMICs including solid state switches are realizable.

  5. A New Technology Transfer Paradigm: How State Universities Can Collaborate with Industry in the USA

    Science.gov (United States)

    Renault, Catherine S.; Cope, Jeff; Dix, Molly; Hersey, Karen

    2008-01-01

    In some US states, policy makers, pressed by local and regional industrial interests, are debating how to "reform" technology transfer at public universities. "Reform" in this context is generally understood to mean redirecting university technology transfer activities to increase the benefits of state-funded research to local industries.…

  6. Motivating Factors of Florida Community and State College Information Technology Faculty

    Science.gov (United States)

    Payne, Wendy Louise

    2013-01-01

    In this study the core job characteristics that contribute to the internal motivational factors and job satisfaction of information technology faculty members working at a community or state college in Florida were investigated. Fifty-four information technology faculty members working at a community or state college in Florida completed the Job…

  7. Adoption of Aquaculture Technology by Fish Farmers in Imo State of Nigeria

    Science.gov (United States)

    Ike, Nwachukwu; Roseline, Onuegbu

    2007-01-01

    This paper evaluated the level of adoption of aquaculture technology extended to farmers in Imo State, Nigeria. To improve aquaculture practice in Nigeria, a technology package was developed and disseminated to farmers in the state. This package included ten practices that the farmers were supposed to adopt. Eighty-two respondents were randomly…

  8. A New Technology Transfer Paradigm: How State Universities Can Collaborate with Industry in the USA

    Science.gov (United States)

    Renault, Catherine S.; Cope, Jeff; Dix, Molly; Hersey, Karen

    2008-01-01

    In some US states, policy makers, pressed by local and regional industrial interests, are debating how to "reform" technology transfer at public universities. "Reform" in this context is generally understood to mean redirecting university technology transfer activities to increase the benefits of state-funded research to local industries.…

  9. Collaborative Technology Initiatives for Serving Persons with Disabilities in New York State. Occasional Paper #1.

    Science.gov (United States)

    Stoll, Peter F.

    This paper describes the programs undertaken by the New York State Center for Learning Technologies in cooperation both with other state agencies and with private agencies to ensure that learning technologies are integrated into educational training programs for the disabled, the handicapped, and other special needs populations. Programs described…

  10. United States geothermal technology: Equipment and services for worldwide applications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    This document has two intended audiences. The first part, ``Geothermal Energy at a Glance,`` is intended for energy system decision makers and others who are interested in wide ranging aspects of geothermal energy resources and technology. The second part, ``Technology Specifics,`` is intended for engineers and scientists who work with such technology in more detailed ways. The glossary at the end of the document defines many of the specialized terms. A directory of US geothermal industry firms who provide goods and services for clients around the world is available on request.

  11. US EPA's UV Disinfection Technologies Demonstration Study - States Briefing

    Science.gov (United States)

    EPA report and anticipated Journal articles will provide recommendations & guidance based on lessons learned for subsequent UV technology testing and monitoring/control applications of virus inactivation in drinking water.

  12. special issue: Technology transfer in United States universities

    OpenAIRE

    Ann-Charlotte Fridh; Bo Carlsson

    2002-01-01

    This paper examines the role of offices of technology transfer (OTT) in 12 U.S. universities in 1998 in commercializing research results in the form of patents, licenses, and start-ups of new companies. We study the organization and place of OTTs within the university structure, the process of technology transfer, and the staffing and funding of the office. Data were collected through a mail questionnaire followed up through telephone interviews. We also conducted a statistical analysis of da...

  13. State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies

    DEFF Research Database (Denmark)

    Hofstätter, Thomas; Pedersen, David Bue; Tosello, Guido

    2017-01-01

    Additive manufacturing technologies have received a lot of attention in recent years for their use in multiple materials such as metals, ceramics, and polymers. The aim of this review article is to analyze the technology of fiber-reinforced polymers and its implementation with additive...... manufacturing. This article reviews recent developments, ideas, and state-of-the-art technologies in this field. Moreover, it gives an overview of the materials currently available for fiber-reinforced material technology....

  14. Introduction to the Special Issue on “State-of-the-Art Sensor Technology in Japan”

    Directory of Open Access Journals (Sweden)

    Yoshiteru Ishida

    2010-05-01

    Full Text Available The combination of sensing technology with information and communication technology (ICT could serve both as global eyes that monitor the environment for environmental issues, and as local eyes that monitor humans for aging society issues. System technology is also required to form such global and local eyes. This special issue, “State-of-the-Art Sensor Technology in Japan”, contains articles and reviews related to the monitoring of humans and the environment, and the integration of sensor systems. [...

  15. A State-of-the-Art Report on Cutting Technologies for Decommissioning Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Kyun; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

    2007-10-15

    This report provides the status of the cryogenic cutting technology as a new dismantling technology for dismantling radioactive nuclear facilities and also presents the direction of study to apply it to a radioactive nuclear facility research aim of its nuclear. This report consists of four chapter : - 1. Background and objectives of dismantling technology for dismantling a radioactive nuclear facility. - 2. Analysis of the status of conventional cutting technologies - 3. Analysis of the status of cryogenic cutting technology - 4. Discussion, conclusion, and future work on state-of-the-art technology of dismantling for nuclear facilities.

  16. Information Technology and Art: Concepts and State of the Practice

    Science.gov (United States)

    Ahmed, Salah Uddin; Camerano, Cristoforo; Fortuna, Luigi; Frasca, Mattia; Jaccheri, Letizia

    The interaction between information technology (IT) and art is an increasing trend. Science, art and technology have been connected since the 60's, when scientists, artists, and inventors started to cooperate and use electronic instruments to create art. In 1960 Marshall McLuhan predicted the idea that the era of "machine-age" technology was next to close, and the electronic media were creating a new way to perform art [1]. The literature is full with examples of artists applying mathematics, robotic technology, and computing to the creation of art. The work in [2] is a good introduction to the merge of IT and art and introduces genetic art, algorithmic art, applications of complex systems and artificial intelligence. The intersection is drawing attention of people from diverse background and it is growing in size and scope. For these reasons, it is beneficiary for people interested in art and technology to know each other's background and interests well. In a multidisciplinary collaboration, the success depends on how well the different actors in the project collaborate and understand each other. See [3] for an introduction about multidisciplinary issues. Meyer and others in [4] explains the collaboration process between artists and technologists.

  17. Managing medical technology: lessons for the United States from Quebec and France.

    Science.gov (United States)

    Rosenau, P V

    2000-01-01

    Important modifications to technology assessment, diffusion, adoption, and utilization must take place if the United States is to better employ medical technology and save resources so as to assure access for the uninsured and underinsured. The United States can learn from other health systems that are more successful in achieving these goals. The author selects for comparison the health systems of France and Quebec. The discussion focuses on the differences between the three systems in the management of medical technology on a range of policy-relevant dimensions, including health system structure, attitudes about planning versus market competition, government regulation, the balance between decentralization and centralization, the needs of the individual and those of the society, linkages between technology assessment and policy-making, and the importance of medical technology assessment for medical practice. Seven specific recommendations are made for better managing medical technology in the United States, drawing on what can be observed from the experiences of Quebec and France.

  18. Solid state device technology for Solar Power Satellite

    Science.gov (United States)

    Weir, D. G.

    1980-01-01

    The feasibility of using solid state elements in the solar power satellite transmitter system is addressed. Recommendations are given concerning device types, the antenna modules, and the overall antenna system. The development of a solid state amplifier based on GaAs field effect transistor devices is also described.

  19. Solid state technology: A compilation. [on semiconductor devices

    Science.gov (United States)

    1973-01-01

    A compilation, covering selected solid state devices developed and integrated into systems by NASA to improve performance, is presented. Data are also given on device shielding in hostile radiation environments.

  20. Silver nanoparticle ink technology: state of the art

    Directory of Open Access Journals (Sweden)

    Rajan K

    2016-01-01

    Full Text Available Krishna Rajan, Ignazio Roppolo, Annalisa Chiappone, Sergio Bocchini, Denis Perrone, Alessandro Chiolerio Center for Space Human Robotics, Italian Institute of Technology, Turin, Italy Abstract: Printed electronics will bring to the consumer level great breakthroughs and unique products in the near future, shifting the usual paradigm of electronic devices and circuit boards from hard boxes and rigid sheets into flexible thin layers and bringing disposable electronics, smart tags, and so on. The most promising tool to achieve the target depends upon the availability of nanotechnology-based functional inks. A certain delay in the innovation-transfer process to the market is now being observed. Nevertheless, the most widely diffused product, settled technology, and the highest sales volumes are related to the silver nanoparticle-based ink market, representing the best example of commercial nanotechnology today. This is a compact review on synthesis routes, main properties, and practical applications. Keywords: silver nanoparticles, surface plasmon resonance, nanocomposites, inks, printed electronics

  1. Laser cutting, State of the art and technological trends

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    1999-01-01

    In this paper a short review of the development trends in laser cutting will be given. The technoloty which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal as it will expand in heavy industry and in cutting of......-dimensional shapes. The CO2 laser will also in the near futre be the domination laser source in the market, although the new developments in ND-YAG-lasers opens for new possibilities for this laser type.......In this paper a short review of the development trends in laser cutting will be given. The technoloty which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal as it will expand in heavy industry and in cutting of 3...

  2. Silver nanoparticle ink technology: state of the art

    OpenAIRE

    Rajan K; Roppolo I; Chiappone A; Bocchini S; Perrone D; Chiolerio A

    2016-01-01

    Krishna Rajan, Ignazio Roppolo, Annalisa Chiappone, Sergio Bocchini, Denis Perrone, Alessandro Chiolerio Center for Space Human Robotics, Italian Institute of Technology, Turin, Italy Abstract: Printed electronics will bring to the consumer level great breakthroughs and unique products in the near future, shifting the usual paradigm of electronic devices and circuit boards from hard boxes and rigid sheets into flexible thin layers and bringing disposable electronics, smart tags, and so on. T...

  3. The current state of FPGA technology in the nuclear domain

    Energy Technology Data Exchange (ETDEWEB)

    Ranta, J.

    2012-07-01

    Field programmable gate arrays are a form of programmable electronic device used in various applications including automation systems. In recent years, there has been a growing interest in the use of FPGA-based systems also for safety automation of nuclear power plants. The interest is driven by the need for reliable new alternatives to replace, on one hand, the aging technology currently in use and, on the other hand, microprocessor and software-based systems, which are seen as overly complex from the safety evaluation point of view. This report presents an overview of FPGA technology, including hardware aspects, the application development process, risks and advantages of the technology, and introduces some of the current systems. FPGAs contain an interesting combination of features from software-based and fully hardware-based systems. Application development has a great deal in common with software development, but the final product is a hardware component without the operating system and other platform functions on which software would execute. Currently the number of FPGA-based applications used for safety functions of nuclear power plants is rather limited, but it is growing. So far there is little experience or common solid understanding between different parties on how FPGAs should be evaluated and handled in the licensing process. (orig.)

  4. Technological Dynamics and Social Capability: Comparing U.S. States and European Nations

    OpenAIRE

    Fagerberg, J; Feldman, M; Srholec, M. (Martin)

    2011-01-01

    This paper analyzes factors that shape the technological capabilities of individual U.S. states and European countries, which are arguably comparable policy units. The analysis demonstrates convergence in technological capabilities from 2000 to 2007. The results indicate that social capabilities, such as a highly educated labor force, an egalitarian distribution of income, a participatory democracy and prevalence of public safety, condition the growth of technological capability. The analys...

  5. Application of Smart Solid State Sensor Technology in Aerospace Applications

    Science.gov (United States)

    Hunter, Gary W.; Xu, Jennifer C.; Dungan, L.K.; Makel, D.; Ward, B.; Androjna, D.

    2008-01-01

    Aerospace applications require a range of chemical sensing technologies to monitor conditions in both space vehicles and aircraft operations. One example is the monitoring of oxygen. For example, monitoring of ambient oxygen (O2) levels is critical to ensuring the health, safety, and performance of humans living and working in space. Oxygen sensors can also be incorporated in detection systems to determine if hazardous leaks are occurring in space propulsion systems and storage facilities. In aeronautic applications, O2 detection has been investigated for fuel tank monitoring. However, as noted elsewhere, O2 is not the only species of interest in aerospace applications with a wide range of species of interest being relevant to understand an environmental or vehicle condition. These include combustion products such as CO, HF, HCN, and HCl, which are related to both the presence of a fire and monitoring of post-fire clean-up operations. This paper discusses the development of an electrochemical cell platform based on a polymer electrolyte, NAFION, and a three-electrode configuration. The approach has been to mature this basic platform for a range of applications and to test this system, combined with "Lick and Stick" electronics, for its viability to monitor an environment related to astronaut crew health and safety applications with an understanding that a broad range of applications can be addressed with a core technology.

  6. 42 CFR 495.332 - State Medicaid health information technology (HIT) plan requirements.

    Science.gov (United States)

    2010-10-01

    ..., individuals in long-term care settings and the aged, blind, and disabled. This description must address the... 42 Public Health 5 2010-10-01 2010-10-01 false State Medicaid health information technology (HIT... HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.332...

  7. Communications Technology in the Future of Higher Education in the United States.

    Science.gov (United States)

    Morgan, Robert P.

    An examination is made of the potential role of communications media and technology in the future of higher education in the United States (U.S.). The status of U.S. higher education is reviewed, important trends are identified, and the rationale for increased technological utilization is discussed. This is followed by a description of selected…

  8. The Supply and Demand of Technology and Engineering Teachers in the United States: Who Knows?

    Science.gov (United States)

    Moye, Johnny J.

    2017-01-01

    The purpose of this study was to determine the supply and demand of technology and engineering teachers in the United States. Once gathered, the resulting data (that was available) was compared to previous studies to determine trends. The researcher reviewed the 2010-11 through 2015-16 Technology & Engineering Teacher Education Directories. To…

  9. Numerical simulation of the stress – strain state of technological tools for fine drawing

    OpenAIRE

    Порубов, А. В.; Мельникова, Т. Е.

    2014-01-01

    An urgent task is to ensure the long life of the technological tool, namely the expensive diamond dies, which can significantly improve the efficiency of the production of wire. Strength Evaluation of technological tools, numerical simulation of the stress – strain state of the diamond drawing tool in the finite – element package ANSYS. Calculation of strain and stress state of the diamond drawing tool for drawing copper and nickel – plated wire with the operating pressure and the pressing fo...

  10. Information technology issues in an era of greater state responsibilities: policy concerns for seniors.

    Science.gov (United States)

    Shrewsbury, Carolyn M

    2002-01-01

    Five areas of state information technology policy are of special concern to seniors and senior service providers: obtaining access; closing the digital divide; developing information management systems; creating portals; and maintaining privacy. Increasing their activities in each of these areas, states continue to vary considerably in their responsiveness to meeting the challenge of including older adults, especially those living in rural areas, with the benefits of information technology.

  11. Energy and Technology Review, July 1984: state of the Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    Each year, Director Roger Batzel addresses the LLNL staff on the state of the Laboratory and the achievements of the past year. On May 17, 1984, Dr. Batzel reported on the estimated budget for fiscal year 1985, which includes an 8.5% increase in operating funds, and on recent progress in our major programs. In this issue, we summarize Dr. Batzel's address and present a sampling of Laboratory achievements.

  12. Solid-state radiation detectors technology and applications

    CERN Document Server

    2015-01-01

    The book discusses the current solid state material used in advance detectors manufacturing and their pros and cons and how one can tailor them using different techniques, to get the maximum performance. The book is application oriented to radiation detectors for medical, X and gamma rays application, and good reference with in-depth discussion of detector's physics as it relates to medical application tailored for engineers and scientists.

  13. State-of-art of modern technologies for metals production

    Energy Technology Data Exchange (ETDEWEB)

    Holappa, L. [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Metallurgy

    1995-12-31

    The future raw materials are becoming lower in metal content and more complex, multimetal concentrates will be utilized. This will give challenges for metallurgists to develop new, efficient and energy saving processes. The main impacts for current and future production technologies come from energy need and environmental issues of the production processes themselves as well as the inevitable energy production for the metal making. Metals production consumes huge amount of energy, roughly 10 pct of the global energy consumption is caused by metallurgists. That is the necessity but it also means energy saving is one of the metallurgical industry have been enormous when looking back to the history. Since the 1960`s the efforts of the industry together with the strict legislation in the industrialized countries have conducted to greatly decreased emissions and improved pollution control. Breakthrough of new processes like copper flash smelting has aided this positive progress

  14. Silver nanoparticle ink technology: state of the art.

    Science.gov (United States)

    Rajan, Krishna; Roppolo, Ignazio; Chiappone, Annalisa; Bocchini, Sergio; Perrone, Denis; Chiolerio, Alessandro

    2016-01-01

    Printed electronics will bring to the consumer level great breakthroughs and unique products in the near future, shifting the usual paradigm of electronic devices and circuit boards from hard boxes and rigid sheets into flexible thin layers and bringing disposable electronics, smart tags, and so on. The most promising tool to achieve the target depends upon the availability of nanotechnology-based functional inks. A certain delay in the innovation-transfer process to the market is now being observed. Nevertheless, the most widely diffused product, settled technology, and the highest sales volumes are related to the silver nanoparticle-based ink market, representing the best example of commercial nanotechnology today. This is a compact review on synthesis routes, main properties, and practical applications.

  15. Analysis of Technology for Solid State Coherent Lidar

    Science.gov (United States)

    Amzajerdian, Farzin

    1997-01-01

    Over the past few years, considerable advances have been made in the areas of the diode-pumped, eye-safe, solid state lasers, wide bandwidth, semiconductor detectors operating in the near-infrared region. These advances have created new possibilities for the development of low-cost, reliable, and compact coherent lidar systems for measurements of atmospheric winds and aerosol backscattering from a space-based platform. The work performed by the UAH personnel concentrated on design and analyses of solid state pulsed coherent lidar systems capable of measuring atmospheric winds from space, and design and perform laboratory experiments and measurements in support of solid state laser radar remote sensing systems which are to be designed, deployed, and used by NASA to measure atmospheric processes and constituents. A lidar testbed system was designed and analyzed by considering the major space operational and environmental requirements, and its associated physical constraints. The lidar optical system includes a wedge scanner and the compact telescope designed by the UAH personnel. The other major optical components included in the design and analyses were: polarizing beam splitter, routing mirrors, wave plates, signal beam derotator, and lag angle compensator. The testbed lidar optical train was designed and analyzed, and different design options for mounting and packaging the lidar subsystems and components and support structure were investigated. All the optical components are to be mounted in a stress-free and stable manner to allow easy integration and alignment, and long term stability. This lidar system is also intended to be used for evaluating the performance of various lidar subsystems and components that are to be integrated into a flight unit and for demonstrating the integrity of the signal processing algorithms by performing actual atmospheric measurements from a ground station.

  16. Pressure-Tolerant Device Technology State of the Art

    Science.gov (United States)

    1975-05-01

    Base Cutoff Characteristics of a Decapped Germanium-Type 2N1412 ( PNP ) Power Transistor in Pure and Sodium Chloride Saturated Silicone Oils at 48.61’ C...Steady-State Collector-Base Cutoff Characteristics of a Decapped Germanium-Type 2N1412 ( PNP ) Power Transistor in Pure and Hydrochloric Acid Saturated...Cutoff Characteristics of Decapped Silicon Types 2N3740 ( PNP ) and 2N4913 (NPN) Power Transistors in Pure and Contaminated Silicone Oils at 48.36’ C It

  17. CTS United States experiments - A progress report. [Communications Technology Satellite for high power broadcasting

    Science.gov (United States)

    Robbins, W. H.; Donoughe, P. L.

    1976-01-01

    The Communications Technology Satellite (CTS) is a high-power broadcast satellite launched by NASA on January 17, 1976. CTS is the first satellite to operate at a frequency of 12 gigahertz and incorporates technology making possible new satellite telecommunications services. CTS is a cooperative program of the United States and Canada. This paper presents the results of the United States experimental activity to date. Wide segments of the population are involved in the Experiments Program, including the scientific community, other government agencies, industry, and the education and health entities. The experiments are associated with both technological objectives and the demonstration of new community and social services via satellite.

  18. Effectiveness of Information Technology Infrastructure Library Process Implementations by Information Technology Departments within United States Organizations

    Science.gov (United States)

    Persinger, Jon F.

    2010-01-01

    This research study examined whether the overall effectiveness of the Information Technology Infrastructure Library (ITIL) could be predicted by measuring multiple independent variables. The primary variables studied included the number of ITIL process modules adopted and the overall ITIL "maturity level." An online survey was used to…

  19. Technology audit: the state of human language technologies (HLT) R&D in South Africa

    CSIR Research Space (South Africa)

    Grover, AS

    2011-07-01

    Full Text Available South Africa (SA) epitomises diversity, with the nation boasting eleven official languages. The field of human language technology (HLT) can play a vital role in bridging the digital divide and thus has been recognised as a priority area...

  20. Effectiveness of Information Technology Infrastructure Library Process Implementations by Information Technology Departments within United States Organizations

    Science.gov (United States)

    Persinger, Jon F.

    2010-01-01

    This research study examined whether the overall effectiveness of the Information Technology Infrastructure Library (ITIL) could be predicted by measuring multiple independent variables. The primary variables studied included the number of ITIL process modules adopted and the overall ITIL "maturity level." An online survey was used to…

  1. Contemporary experimental aesthetics: State of the art technology.

    Science.gov (United States)

    Locher, Paul

    2011-01-01

    The purpose of this essay is to provide the reader with a brief overview of several recent person-artifact-context relational models that explain the complex interaction of the processes that underlie an ongoing aesthetic experience with visual art forms. Recent progress towards a comprehensive understanding of these processes has been made possible in large part by experimental approaches that take advantage of recent advances in computer technology and electronic sophistication. To illustrate this point, three experimental techniques at the forefront of the field of experimental aesthetics are highlighted here. They include the investigation of viewers- body postural adjustments to depicted pictorial depth and movement in paintings; the use of hand-held computers known as personal data assistants to record audience members- on-going emotional reactions to live performances of dance; and the contribution of audio tour information to museum visitors- interaction with and aesthetic evaluation of sculptures and paintings. Finally, the eMotion: Mapping Museum Experience project, which has the potential to make a tremendous contribution to the understanding of the complex interaction of factors that contribute to a museum visitor's experience, is described.

  2. Technologies Use with ESL Learners in New York State: Preliminary Report.

    Science.gov (United States)

    Meskill, Carla; Mossop, Jonathan

    2000-01-01

    Presents preliminary research concerning learners whose native language is not English and who attend public school in New York State. Research focused on how English as a Second Language (ESL) teachers in the state view and use technologies to help develop their students' literacy skills. Discusses data from a statewide survey and from initial…

  3. A State of the Art Survey of Fraud Detection Technology

    Science.gov (United States)

    Flegel, Ulrich; Vayssière, Julien; Bitz, Gunter

    With the introduction of IT to conductbusiness we accepted the loss of a human control step.For this reason, the introductionof newIT systemswas accompanied by the development of the authorization concept. But since, in reality, there is no such thing as 100 per cent security; auditors are commissioned to examine all transactions for misconduct. Since the data exists in digital form already, it makes sense to use computer-based processes to analyse it. Such processes allow the auditor to carry out extensive checks within an acceptable timeframe and with reasonable effort. Once the algorithm has been defined, it only takes sufficient computing power to evaluate larger quantities of data. This contribution presents the state of the art for IT-based data analysis processes that can be used to identify fraudulent activities.

  4. Ocean Bottom Seismometers technology: current state and future outlook

    Science.gov (United States)

    Ilinskiy, Dmitry; Ganzha, Oleg

    2016-04-01

    The beginning of 2000s was marked by a significant progress in the development and use of self-pop-up sea-bottom seismic recorders (Ocean Bottom Seismometers). In Russia it was a novel solution developed by the Russian Academy of Sciences Experimental Design Bureau of Oceanological Engineering. This recorder and its clones have been widely used not only for the Earth crust studies, but also for investigations of sub-basalt structures and gas hydrate exploration. And what has happened over the last 10 years? Let us look closely at the second generation of ocean bottom stations developed by Geonodal Solutions (GNS) as an illustration of the next step forward in the sea-bottom acquisition technology. First of all, hardware components have changed dramatically. The electronic components became much smaller, accordingly, the power consumption and electronic self-noise were dropped down significantly. This enabled development of compact station 330 mm in diameter instead of previous 450mm. The weight fell by half, while the autonomy increased up to 90 days due to both decreased energy consumption and increased capacity of the batteries. The dynamic range of recorded seismic data has expended as a result of decreased set noise and the application of 24-bit A/D converters. The instruments dimensions have been reduced, power consumption decreased, clock accuracy was significantly improved. At the same time, development of advanced time reference algorithms enabled to retain instrument accuracy around 1 ms during all the autonomous recording period. The high-speed wireless data transfer technology offered a chance to develop "maintenance-free" station throughout its operation time. The station can be re-used at the different sea bottom locations without unsealing of the deep-water container for data download, battery re-charge, clock synchronization. This noticeably reduces the labor efforts of the personnel working with the stations. This is critically important in field

  5. Discovery Mondays "State-of-the-art technologies for precision"

    CERN Multimedia

    2007-01-01

    Ceramic plate drilled with high precision in CERN’s workshop. The diameter of each hole is only 0.02 millimetres, comparable to the diameter of a hair.Scientists have to be infinitely precise to study the infinitely small. Thus, even though the LHC is the world’s largest accelerator, it has to be aligned to within a tenth of a millimetre. The detectors weigh several thousand tonnes but are capable of detecting the tiniest vibration of the Earth. Join us at the next Discovery Monday to find out about CERN’s state-of-the-art tools for achieving the degrees of resolution required in the field of particle physics. Don’t miss this opportunity to discover the world of precision! The event will be conducted in FrenchCome along to the Microcosm (Reception Building 33, Meyrin site) on Monday 5 November from 7.30 p.m. to 9.00 p.m. Entrance Free http://www.cern.ch/LundisDecouverte/

  6. Computed tomography: acquisition process, technology and current state

    Directory of Open Access Journals (Sweden)

    Óscar Javier Espitia Mendoza

    2016-02-01

    Full Text Available Computed tomography is a noninvasive scan technique widely applied in areas such as medicine, industry, and geology. This technique allows the three-dimensional reconstruction of the internal structure of an object which is lighted with an X-rays source. The reconstruction is formed with two-dimensional cross-sectional images of the object. Each cross-sectional is obtained from measurements of physical phenomena, such as attenuation, dispersion, and diffraction of X-rays, as result of their interaction with the object. In general, measurements acquisition is performed with methods based on any of these phenomena and according to various architectures classified in generations. Furthermore, in response to the need to simulate acquisition systems for CT, software dedicated to this task has been developed. The objective of this research is to determine the current state of CT techniques, for this, a review of methods, different architectures used for the acquisition and some of its applications is presented. Additionally, results of simulations are presented. The main contributions of this work are the detailed description of acquisition methods and the presentation of the possible trends of the technique.

  7. Progress in LED technology for solid-state lighting

    Science.gov (United States)

    Bhardwaj, Jy; Guth, Greg; Cesaratto, John M.; Shchekin, Oleg B.; Soer, Wouter A.; Götz, Werner; Bonné, Ron; Song, Zhihua F.; den Breejen, Jeroen

    2017-02-01

    As solid-state lighting adoption moves from bulb socket replacement to lighting system engineering, luminaire manufacturers are beginning to actualize far greater cost savings through luminaire optimization rather than the simplistic process of component cost pareto management. Indeed, there are an increasing number of applications in which we see major shifts in the value chain in terms of increasing the L1 (LED) and L2 (LED array on PCB) value. The L1 value increase stems from a number of factors ranging from simply higher performing LEDs reducing the LED count, to L1 innovation such as high voltage LEDs, optimizing driver efficiency or to the use of high luminance LEDs enabling compact optics, allowing not only more design freedom but also cost reduction through space and weight savings. The L2 value increase is realized predominantly through increasing L2 performance with the use of algorithms that optimize L1 selection and placement and/or through L2 integration of drivers, control electronics, sensors, secondary lens and/or environmental protection, which is also initiating level collapse in the value chain. In this paper we will present the L1 and L2 innovations that are enabling this disruption as well as provide examples of fixture/luminaire level benefits.

  8. Solid State Ionics Advanced Materials for Emerging Technologies

    Science.gov (United States)

    Chowdari, B. V. R.; Careem, M. A.; Dissanayake, M. A. K. L.; Rajapakse, R. M. G.; Seneviratne, V. A.

    2006-06-01

    Keynote lecture. Challenges and opportunities of solid state ionic devices / W. Weppner -- pt. I. Ionically conducting inorganic solids. Invited papers. Multinuclear NMR studies of mass transport of phosphoric acid in water / J. R. P. Jayakody ... [et al.]. Crystalline glassy and polymeric electrolytes: similarities and differences in ionic transport mechanisms / J.-L. Souquet. 30 years of NMR/NQR experiments in solid electrolytes / D. Brinkmann. Analysis of conductivity and NMR measurements in Li[symbol]La[symbol]TiO[symbol] fast Li[symbol] ionic conductor: evidence for correlated Li[symbol] motion / O. Bohnké ... [et al.]. Transport pathways for ions in disordered solids from bond valence mismatch landscapes / S. Adams. Proton conductivity in condensed phases of water: implications on linear and ball lightning / K. Tennakone -- Contributed papers. Proton transport in nanocrystalline bioceramic materials: an investigative study of synthetic bone with that of natural bone / H. Jena, B. Rambabu. Synthesis and properties of the nanostructured fast ionic conductor Li[symbol]La[symbol]TiO[symbol] / Q. N. Pham ... [et al.]. Hydrogen production: ceramic materials for high temperature water electrolysis / A. Hammou. Influence of the sintering temperature on pH sensor ability of Li[symbol]La[symbol]TiO[symbol]. Relationship between potentiometric and impedance spectroscopy measurements / Q. N. Pham ... [et al.]. Microstructure chracterization and ionic conductivity of nano-sized CeO[symbol]-Sm[symbol]O[symbol] system (x=0.05 - 0.2) prepared by combustion route / K. Singh, S. A. Acharya, S. S. Bhoga. Red soil in Northern Sri Lanka is a natural magnetic ceramic / K. Ahilan ... [et al.]. Neutron scattering of LiNiO[symbol] / K. Basar ... [et al.]. Preparation and properties of LiFePO[symbol] nanorods / L. Q. Mai ... [et al.]. Structural and electrochemical properties of monoclinic and othorhombic MoO[symbol] phases / O. M. Hussain ... [et al.]. Preparation of Zircon (Zr

  9. New York State Technology Education: History, the Current State of Affairs, and the Future

    Science.gov (United States)

    Dettelis, Phil

    2011-01-01

    Since the early 1980s, technology education has undergone several changes, incorporating new philosophies, new courses, and even a new name. This discipline, which is historically rooted in industrial arts, has endeavored to carve out a niche based on preparing students for careers, hands-on applications of mathematics and science, critical…

  10. The diffusion of two diagnostic technologies among hospitals in New York state.

    Science.gov (United States)

    Haddock, C C; Begun, J W

    1988-01-01

    Using combined data from an independent survey by the American Hospital Association and the State of New York, the diffusion of two diagnostic technologies--the automated chemistry analyzer and the computed tomography (CT) scanner--among hospitals in New York State was analyzed. A linearized form of the logistic function was estimated using cumulative diffusion data for each. Diffusion patterns of both technologies fit the logistic curve well, with the coefficient of diffusion for the CT scanner being greater than that for the automated analyzer. Further analysis examined characteristics of early adopters of each technology. Similar hospital characteristics (e.g., high volume of admissions and medical school affiliation) were important in explaining early adoption of both technologies.

  11. An overview of remote sensing technology transfer in Canada and the United States

    Science.gov (United States)

    Strome, W. M.; Lauer, D. T.

    1977-01-01

    To realize the maximum potential benefits of remote sensing, the technology must be applied by personnel responsible for the management of natural resources and the environment. In Canada and the United States, these managers are often in local offices and are not those responsible for the development of systems to acquire, preprocess, and disseminate remotely sensed data, nor those leading the research and development of techniques for analysis of the data. However, the latter organizations have recognized that the technology they develop must be transferred to the management agencies if the technology is to be useful to society. Problems of motivation and communication associated with the technology transfer process, and some of the methods employed by Federal, State, Provincial, and local agencies, academic institutions, and private organizations to overcome these problems are explored.

  12. 31 CFR 560.418 - Release of technology or software in the United States or a third country.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Release of technology or software in... IRANIAN TRANSACTIONS REGULATIONS Interpretations § 560.418 Release of technology or software in the United States or a third country. The release of technology or software in the United States, or by a United...

  13. [Adoption of information and communication technologies in the dialysis clinics of Bahia State].

    Science.gov (United States)

    Mota, Fábio Batista; Ferreira Júnior, Hamilton de Moura

    2010-06-01

    The aim of this article is to investigate the adoption and use of information and communication technologies within private dialysis clinics in Bahia State. A case study was developed with companies by applying, to clinics' managerial teams, a research questionnaire adapted from RedeSist and from PINTEC. The sample included 20 companies, listed by CNES of the Ministry of Health, and obtained a positive usage rate data of 60%. The collected quantitative information was analyzed by interviewees' answer frequency distribution. Conclusion indicates that the adoption of information and communication technologies by the clinics is not directly related to their access to these technologies but to the under usage of their economical potential.

  14. Joystick control for powered mobility: current state of technology and future directions.

    Science.gov (United States)

    Dicianno, Brad E; Cooper, Rory A; Coltellaro, John

    2010-02-01

    Recent advancements in control interface technology have made the use of end devices such as power wheelchairs easier for individuals with disabilities, especially persons with movement disorders. In this article, we discuss the current state of control interface technology and the devices available clinically for power wheelchair control. We also discuss our research on novel hardware and software approaches that are revolutionizing joystick interface technology and allowing more customizability for individual users with special needs and abilities. Finally, we discuss the future of control interfaces and what research gaps remain.

  15. Information Technology of Study of the State Foreign Debt in Developing Countries

    Directory of Open Access Journals (Sweden)

    Matvieieva Iuliia M.

    2014-03-01

    Full Text Available Due to expansion of international relations, growth of interest of states in attraction of foreign capital, appearance of excessive debts and problems connected with them, urgency of the issue of the state foreign debt significantly increased. The problem of state foreign debt is especially sharp in developing countries. Taking into account specific features of functioning of economies of these states, it is necessary to develop information approaches with the aim of studying macro-economic processes, which could assist in creation of improved mechanisms of functioning of the debt policy. The goal of the article is building an information technology of study of the state foreign debt, which would allow conduct of a complex analysis of the studied problem. The article offers a three-stage information technology of study of the state foreign debt, which gives a possibility to analyse and assess the study problem. This article also reveals properties, functions and tasks, which are solve by the information technology. It gives a detailed description of each stage and its notional elements. It forms the structured database for a possibility to carry out an experiment. On the basis of the first stage the article builds econometric models, which reflect interrelations between macro-economic factors, which gives an opportunity to forecast, analyse and assess the state foreign debt.

  16. Investigation on Satellite-borne High-power Solid-state Power Amplifier Technology and Experiment

    OpenAIRE

    Wu Xiao-po; Zhao Hai-yang; Xi Song-tao

    2014-01-01

    Based on the research and development efforts of satellite-borne lumped solid-state transmitters, the design of a satellite-borne high-power microwave amplifier module is introduced. Focusing on satellite-borne applications, aspects of the high-power density thermal design, multipactor proof design, EMC design and so on, which are critical technologies for a solid-state power amplifier, are discussed. Subsequently, experiments are used to verify the concept.

  17. Investigation on Satellite-borne High-power Solid-state Power Amplifier Technology and Experiment

    Directory of Open Access Journals (Sweden)

    Wu Xiao-po

    2014-06-01

    Full Text Available Based on the research and development efforts of satellite-borne lumped solid-state transmitters, the design of a satellite-borne high-power microwave amplifier module is introduced. Focusing on satellite-borne applications, aspects of the high-power density thermal design, multipactor proof design, EMC design and so on, which are critical technologies for a solid-state power amplifier, are discussed. Subsequently, experiments are used to verify the concept.

  18. Technology Transfer in the EU: Exporting Strategically Important ICT Solutions to Other EU Member States

    Directory of Open Access Journals (Sweden)

    Säär Anni

    2015-10-01

    Full Text Available The fast development of ICTs pose new challenges to the European Union and its Member States. Every EU country has its own policies regarding technology transfer, ownership of state e-services, and the possibilities how the state-owned or licensed e-service could be exported. Taking into account the free movement of goods, the EU has created a platform to cooperate and export IT solutions. However, the lack of preparedness of infrastructures, legislation and stakeholders for cross-border exchanges poses a threat to IT transfer and should be taken into consideration in the EU as well. In the coming decades the number of outsourced ICT solutions, strategically important ICT solutions, public services and critically important information exchange platforms developed on behalf of the states, will grow exponentially. Still, digital development is uneven across the EU, they grow at different speeds and the performance is quite splintered. There are legal provisions which are outdated and therefore impede technological cooperation and export of IT solutions. A Member State may restrict the ICT licensing based on national security and policy reasons and the ownership of intellectual property might pose a threat to technology transfer or further development of the IT solution. There are examples of strategically important export of ICT solutions, the experience at which can be expanded to cover other EU Member States. Strong collaboration would enable mutual learning from past experiences along with the opportunities for better use of technology. Parallels can be drawn with military technology transfers, as the policies and legal framework was first developed and mostly used with them.

  19. Combining Brain-Computer Interfaces and Assistive Technologies: State-of-the-Art and Challenges

    Directory of Open Access Journals (Sweden)

    José del R. Millán

    2010-09-01

    Full Text Available In recent years, new research has brought the field of EEG-based Brain-Computer Interfacing (BCI out of its infancy and into a phase of relative maturity through many demonstrated prototypes such as brain-controlled wheelchairs, keyboards, and computer games. With this proof-of-concept phase in the past, the time is now ripe to focus on the development of practical BCI technologies that can be brought out of the lab and into real-world applications. In particular, we focus on the prospect of improving the lives of countless disabled individuals through a combination of BCI technology with existing assistive technologies (AT. In pursuit of more practical BCIs for use outside of the lab, in this paper, we identify four application areas where disabled individuals could greatly benefit from advancements in BCI technology, namely,“Communication & Control”, “Motor Substitution”, “Entertainment”, and “Motor Recovery”. We review the current state of the art and possible future developments, while discussing the main research issues in these four areas. In particular, we expect the most progress in the development of technologies such as hybrid BCI architectures, user-machine adaptation algorithms, the exploitation of users’ mental states for BCI reliability and confidence measures, the incorporation of principles in human-computer interaction (HCI to improve BCI usability, and the development of novel BCI technology including better EEG devices.

  20. Combining Brain-Computer Interfaces and Assistive Technologies: State-of-the-Art and Challenges.

    Science.gov (United States)

    Millán, J D R; Rupp, R; Müller-Putz, G R; Murray-Smith, R; Giugliemma, C; Tangermann, M; Vidaurre, C; Cincotti, F; Kübler, A; Leeb, R; Neuper, C; Müller, K-R; Mattia, D

    2010-01-01

    In recent years, new research has brought the field of electroencephalogram (EEG)-based brain-computer interfacing (BCI) out of its infancy and into a phase of relative maturity through many demonstrated prototypes such as brain-controlled wheelchairs, keyboards, and computer games. With this proof-of-concept phase in the past, the time is now ripe to focus on the development of practical BCI technologies that can be brought out of the lab and into real-world applications. In particular, we focus on the prospect of improving the lives of countless disabled individuals through a combination of BCI technology with existing assistive technologies (AT). In pursuit of more practical BCIs for use outside of the lab, in this paper, we identify four application areas where disabled individuals could greatly benefit from advancements in BCI technology, namely, "Communication and Control", "Motor Substitution", "Entertainment", and "Motor Recovery". We review the current state of the art and possible future developments, while discussing the main research issues in these four areas. In particular, we expect the most progress in the development of technologies such as hybrid BCI architectures, user-machine adaptation algorithms, the exploitation of users' mental states for BCI reliability and confidence measures, the incorporation of principles in human-computer interaction (HCI) to improve BCI usability, and the development of novel BCI technology including better EEG devices.

  1. Guiding Opinions of the State Council on Promoting Technological Transformation of Enterprises Released

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Recently, the State Council released the Guiding Opinions on Promoting Technological Transformation of Enterprises (Guo Fa [2012] No. 44). The Guiding Opinions includes three parts, i.e. overall requirements, key tasks and supporting measures, which requires all regions and all depart- ments to further unify the idea, deeply understand the importance and urgency of promoting techno- logical transformation of enterprises,

  2. Related Variety, Unrelated Variety and Technological Breakthroughs: An analysis of US State-Level Patenting

    NARCIS (Netherlands)

    Castaldi, C.; Frenken, K.; Los, B.

    2015-01-01

    Castaldi C., Frenken K. and Los B. Related variety, unrelated variety and technological breakthroughs: an analysis of US state-level patenting, Regional Studies. This paper investigates how variety affects the innovation output of a region. Borrowing arguments from theories of recombinant innovation

  3. Academic Staff Utilization of Information and Communication Technology and Knowledge Creation in Cross River State Universities

    Science.gov (United States)

    Ekpoh, Uduak Imo; Etor, Comfort Robert

    2012-01-01

    This study examined academic staff utilization of Information and Communication Technology (ICT) in knowledge creation in universities in Cross River State. The study was guided by two research questions and one hypothesis. A questionnaire was developed, validated and used for data collection from a sample of 300 academic staff. Descriptive…

  4. Available Motherhood: Legal Technologies, "State of Exception" and the Dekinning of "War-Babies" in Bangladesh

    Science.gov (United States)

    Mookherjee, Nayanika

    2007-01-01

    This article takes an ethnographical approach to explore the "state of exception" through which legal technologies of abortion and adoption of "war-babies" (children born as a result of wartime rapes) in the Bangladesh war enabled the dekinning and elimination of certain childhoods while the raped women were rekinned within…

  5. Teacher Perspectives on the Current State of Computer Technology Integration into the Public School Classroom

    Science.gov (United States)

    Zuniga, Ramiro

    2009-01-01

    Since the introduction of computers into the public school arena over forty years ago, educators have been convinced that the integration of computer technology into the public school classroom will transform education. Joining educators are state and federal governments. Public schools and others involved in the process of computer technology…

  6. Building Software Development Capacity to Advance the State of Educational Technology

    Science.gov (United States)

    Luterbach, Kenneth J.

    2013-01-01

    Educational technologists may advance the state of the field by increasing capacity to develop software tools and instructional applications. Presently, few academic programs in educational technology require even a single computer programming course. Further, the educational technologists who develop software generally work independently or in…

  7. Educational Technology as a Key to Educational Innovation: State of the Art Report from Germany.

    Science.gov (United States)

    Issing, Ludwig, J.; Schaumburg, Heike

    2001-01-01

    Reports current governmental initiatives and projects on the elementary/secondary school and university level to provide a brief overview on the state of educational technology in Germany. Discusses conferences and exhibitions concerning the use of media in education, and uses of the Internet and distance education. (AEF)

  8. Identifying Disruptive Technologies Facing the United States in the Next 20 Years

    Science.gov (United States)

    2009-12-11

    believes that anandamine is the chemical ―most likely responsible for flow states.‖23 The article also talks of endorphins and the current theory is that...anandamine is the chemical that helps endorphins move in the brain.24 This technology has been studied for at least 30 years and the prediction on a

  9. Farmers' Adoption of Soil Conservation Technologies: A Case Study from Osun State, Nigeria

    Science.gov (United States)

    Junge, B.; Deji, O.; Abaidoo, R.; Chikoye, D.; Stahr, K.

    2009-01-01

    The main objective of this study was to determine the attitude of farmers towards erosion and the adoption of appropriate soil conservation technologies (SCTs). For the survey, farmers were selected from the communities Esa Oke, Elwure and Owode-Ede and Akoda in Osun State in Nigeria. In the first three communities farmers did receive training on…

  10. Information and Communication Technologies in Enhancing Learning Ability in Secondary Schools in Edo State, Nigeria

    Science.gov (United States)

    Osagie, Roseline O.

    2012-01-01

    The dismal results of 2011, 2010, 2009, and previous years WAEC and NECO Senior School Certificate Examinations (SSCE) show the pitiable state of education in secondary schools in Nigeria. The youths of today live in a digital age. Web technologies and sites have become an integral part of the youth culture. Today's youths use the web tools to…

  11. Building Software Development Capacity to Advance the State of Educational Technology

    Science.gov (United States)

    Luterbach, Kenneth J.

    2013-01-01

    Educational technologists may advance the state of the field by increasing capacity to develop software tools and instructional applications. Presently, few academic programs in educational technology require even a single computer programming course. Further, the educational technologists who develop software generally work independently or in…

  12. Information technology and emergency management: preparedness and planning in US states.

    Science.gov (United States)

    Reddick, Christopher

    2011-01-01

    The purpose of this paper is to examine the impact of information technology (IT) on emergency preparedness and planning by analysing a survey of US state government departments of emergency management. The research results show that there has been a significant impact of IT on emergency planning. IT has proven to be effective for all phases of emergency management, but especially for the response phase. There are numerous technologies used in emergency management, ranging from the internet, Geographic Information Systems and wireless technologies to more advanced hazard analysis models. All were generally viewed as being effective. Lack of financial resources and support from elected officials is a perennial problem in public administration, and was found to be prevalent in this study of IT and emergency management. There was evidence that state governments rating high on a performance index were more likely to use IT for emergency management.

  13. The Status of Technology and Engineering Education in the United States: A Fourth Report of the Findings from the States (2011-12)

    Science.gov (United States)

    Moye, Johnny J.; Dugger, William E., Jr.; Starkweather, Kendall N.

    2012-01-01

    Technology and engineering education continues to evolve as it becomes more apparent that students need this information to become more successful in college and careers. The International Technology and Engineering Educators Association (ITEEA ) has tracked the status of technology education in the United States in three separate studies over the…

  14. The state of information and communication technology and health informatics in ghana.

    Science.gov (United States)

    Achampong, Emmanuel Kusi

    2012-01-01

    Information and Communication Technology (ICT) has become a major tool in delivery of health services and has had an innovative impact on quality of life. ICT is affecting the way healthcare is delivered to clients. In this paper, we discuss the state of ICT and health informatics in Ghana. We also discuss the state of various relevant infrastructures for the successful implementation of ehealth projects. We analyse the past and present state of health informatics in Ghana, in comparison to other African countries. We also review the challenges facing successful implementation of health informatics projects in Ghana and suggest possible solutions.

  15. Oil and gas technology transfer activities and potential in eight major producing states. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    In 1990, the Interstate Oil and Gas Compact Commission (the Compact) performed a study that identified the structure and deficiencies of the system by which oil and gas producers receive information about the potential of new technologies and communicate their problems and technology needs back to the research community. The conclusions of that work were that major integrated companies have significantly more and better sources of technology information than independent producers. The majors also have significantly better mechanisms for communicating problems to the research and development (R&D) community. As a consequence, the Compact recommended analyzing potential mechanisms to improve technology transfer channels for independents and to accelerate independents acceptance and use of existing and emerging technologies. Building on this work, the Compact, with a grant from the US Department Energy, has reviewed specific technology transfer organizations in each of eight major oil producing states to identify specific R&D and technology transfer organizations, characterize their existing activities, and identify potential future activities that could be performed to enhance technology transfer to oil and gas producers. The profiles were developed based on information received from organizations,follow-up interviews, site visit and conversations, and participation in their sponsored technology transfer activities. The results of this effort are reported in this volume. In addition, the Compact has also developed a framework for the development of evaluation methodologies to determine the effectiveness of technology transfer programs in performing their intended functions and in achieving desired impacts impacts in the producing community. The results of that work are provided in a separate volume.

  16. Fostering renewable energy in small developing island states through knowledge and technology transfer: the - DIREKT Project

    Energy Technology Data Exchange (ETDEWEB)

    Leal, Walter; Schulte, Veronika; Gottwald, Julia

    2010-07-01

    Full text: It is widely acknowledged that the use of renewable energy may assist developing countries as a whole and Small Island States in particular, in addressing their energy needs and at the same time reducing their dependence on fossil fuels. In order to support these efforts, the project Small Developing Island Renewable Energy Knowledge and Technology Transfer Network (DIREKT) is being undertaken. DIREKT is a cooperation scheme involving universities from Germany, Fiji, Mauritius and Trinidad et Tobago with the aim of strengthening their science and technology capacity in the field of renewable energy, by means of technology transfer, information exchange and networking. Developing countries are especially vulnerable to problems associated with climate change and much can be gained by raising their capacity in the field of renewable energy, which is a key area. This paper introduces the project DIREKT, its aims and the partnership. It will also show how sustainable cooperation between the science and technology communities of ACP and EU institutions in the key area of Renewable Energy may be achieved, which is of great relevance for the socio-economic development of small island developing states. One of features of the project, namely the establishment of Research and Technology Transfer Centres within each of the partner countries, will be presented. (Author)

  17. Analysis of Pilot Feedback Regarding the Use of State Awareness Technologies During Complex Situations

    Science.gov (United States)

    Evans, Emory; Young, Steven D.; Daniels, Taumi; Santiago-Espada, Yamira; Etherington, Tim

    2016-01-01

    A flight simulation study was conducted at NASA Langley Research Center to evaluate flight deck systems that (1) predict aircraft energy state and/or autoflight configuration, (2) present the current state and expected future state of automated systems, and/or (3) show the state of flight-critical data systems in use by automated systems and primary flight instruments. Four new technology concepts were evaluated vis-à-vis current state-of-the-art flight deck systems and indicators. This human-in-the-loop study was conducted using commercial airline crews. Scenarios spanned a range of complex conditions and several emulated causal factors and complexity in recent accidents involving loss of state awareness by pilots (e.g. energy state, automation state, and/or system state). Data were collected via questionnaires administered after each flight, audio/video recordings, physiological data, head and eye tracking data, pilot control inputs, and researcher observations. This paper strictly focuses on findings derived from the questionnaire responses. It includes analysis of pilot subjective measures of complexity, decision making, workload, situation awareness, usability, and acceptability.

  18. The technology and science of steady-state operation in magnetically confined plasmas

    Science.gov (United States)

    Bécoulet, A.; Hoang, G. T.

    2008-12-01

    The steady-state operation of magnetically confined fusion plasmas is considered as one of the 'grand challenges' of future decades, if not the ultimate goal of the research and development activities towards a new source of energy. Reaching such a goal requires the high-level integration of both science and technology aspects of magnetic fusion into self-consistent plasma regimes in fusion-grade devices. On the physics side, the first constraint addresses the magnetic confinement itself which must be made persistent. This means to either rely on intrinsically steady-state configurations, like the stellarator one, or turn the inductively driven tokamak configuration into a fully non-inductive one, through a mix of additional current sources. The low efficiency of the external current drive methods and the necessity to minimize the re-circulating power claim for a current mix strongly weighted by the internal 'pressure driven' bootstrap current, itself strongly sensitive to the heat and particle transport properties of the plasma. A virtuous circle may form as the heat and particle transport properties are themselves sensitive to the current profile conditions. Note that several other factors, e.g. plasma rotation profile, magneto-hydro-dynamics activity, also influence the equilibrium state. In the present tokamak devices, several examples of such 'advanced tokamak' physics research demonstrate the feasibility of steady-state regimes, though with a number of open questions still under investigation. The modelling activity also progresses quite fast in this domain and supports understanding and extrapolation. This high level of physics sophistication of the plasma scenario however needs to be combined with steady-state technological constraints. The technology constraints for steady-state operation are basically twofold: the specific technologies required to reach the steady-state plasma conditions and the generic technologies linked to the long pulse operation of a

  19. [Flat-panel detector technology -State-of-the-art and future prospects-].

    Science.gov (United States)

    Yamazaki, Tatsuya

    2002-01-01

    A flat-panel detector (FPD) is a long-awaited technology to implement the digital X-ray imaging technology into the radiological department. This paper describes the state-of-the-art technology and future prospects on the FPD technology. State-of-the-art technology was reviewed taking the CXDI series as an example. Several FPD-based systems have been introduced into the Japanese market since CXDI-11 opened it in November 1998. Accompanying CXDI-C2 for control, CXDI-22 for table position and CXDI-31 for portable, the CXDI series fulfills the requirement of the radiography room being a fully digitalized room. The FPD on the CXDI series is comprised of a scintillator (Gd(2)O(2)S:Tb(3+)) as a primary sensor in which the X-ray is captured and an amorphous silicon detector (LANMIT) as a secondary sensor in which the fluorescent light is detected. Since the scintillator is identical to that of the screen-film systems, it can be said as proven, durable and chemically stable and it is expected to produce the same image quality as the screen-film systems. CXDI-31, a portable FPD-based system, was developed targeting thinner dimensions, lightweight, durability and high spatial resolution. Thoroughly re-designing the mechanical structure and reducing the power consumption at the readout IC realized thinner dimensions. Introducing the portable note PC technologies successfully combined lightweight with durability. Improving the sensor process and re-designing the layout made the sensor high resolution without compromising the signal-to-noise ratio. Future prospects were overviewed in the aspect of technology and applications. Sensitivity, spatial resolution, frame rate and portability were described as the upcoming technology. Increasing gain and reducing noise will realize higher sensitivity, especially by adopting the PbI(2), HgI(2) or such photoconductor materials as the primary sensor. Pixelized amplifier will also achieve higher sensitivity. Layered sensor designed such

  20. Assessment of the Adoption Rate of Technologies among Fadama III Farmers in Adamawa State, Nigeria

    Directory of Open Access Journals (Sweden)

    Umar, AdamuMadu

    2013-09-01

    Full Text Available The study was conducted in Adamawa State, Nigeria. The major thrust of this study is to assess the adoption rate of technology in Fadama III. In its four years of operation, Fadama III project has realized significant impact on household access to new and proven technologies. Adoption rate of technologies among beneficiaries has increased from 43.75% before the inception of the project to 96.255% after the project intervention. This indicates 50% increase against only 20% increase among the non-beneficiaries. Adoption rate of off-farm technologies (agricultural marketing and financial management was also large. The adoption rate for the all the technologies was significant at p = 0.05, except for fish feed formulation, Cold storage, marketing and fish smoking. Yields among respondents have increased significantly due to adoption of proven technologies. The increase was higher among crop farmers (59.38% followed by livestock farmers (48.75%. The increase in yields across all the enterprises has exceeded the set target of 20% increase except for fish production (11.25% and Agro-forestry (6.88%. The increase was more among the beneficiaries compared to non-beneficiaries. It can be concluded that project did not only influence the beneficiaries to adopt technologies for the purpose of improving their socio-economic status but it has also influenced the non-beneficiaries living in Fadama III communities to adopt technologies. Fadama III needs to harmonize existing approaches and need to use complementary systems rather than conflicting ones.

  1. Novel in silico technology in combination with microarrays: a state-of-the-art technology for allergy diagnosis and management?

    Science.gov (United States)

    Melioli, Giovanni; Passalacqua, Giovanni; Canonica, Giorgio W

    2014-12-01

    'Allergen microarrays, in poly-sensitized allergic patients, represent a real value added in the accurate IgE profiling and in the identification of allergen(s) to administer for an effective allergen immunotherapy.' Allergen microarrays (AMA) were developed in the early 2000s to improve the diagnostic pathway of patients with allergic reactions. Nowadays, AMA are constituted by more than 100 different components (either purified or recombinant), representing genuine and cross-reacting molecules from plants and animals. The cost of the procedure had suggested its use as third-level diagnostics (following in vivo- and in vitro-specific IgE tests) in poly-sensitized patients. The complexity of the interpretation had inspired the development of in silico technologies to help clinicians in their work. Both machine learning techniques and expert systems are now available. In particular, an expert system that has been recently developed not only identifies positive and negative components but also lists dangerous components and classifies patients based on their potential responsiveness to allergen immunotherapy, on the basis of published algorithms. For these characteristics, AMA represents the state-of-the-art technology for allergy diagnosis in poly-sensitized patients.

  2. State of Art in the Science and Technology of Electrical Discharge Light Sources

    Science.gov (United States)

    Zissis, Georges; Rouffet, Jean-Baptiste

    Light is vital for life: Light sources play an indispensable role to daily life of any Human being. Our World cannot be conceived without light. Quality of life, health and, somehow, urban security related with traffic and crime prevention measures depend on light and on its quality. The lighting industry is an important economic factor in Europe, USA and many Asiatic Countries. All in all, lighting is an important socio-economic factor and lighting system development should be an integral part of any Sustainable Development and of any program of improvement of Quality of Life. This presentation provides an overview of the present state of research in the science and technology of light sources. Existing technologies and future challenges for the lighting industry will be presented. To better understanding the light source technology an part of this presentation will be devoted to the physics of light sources.

  3. ['State of the nation's healthcare 2008' annual report: technology is useful, but training comes first].

    Science.gov (United States)

    de Mol, B A J M

    2008-11-22

    The Netherlands Health Care Inspectorate's annual report on the state of the nation's healthcare in 2008 is dedicated to the use of medical technology. The subtitle of the report is 'Risks of medical technology underestimated'. Lack of education and training expose patients to an unacceptable risk of injury within both the care and the cure setting. The Inspectorate urgently recommends applying a certification system to physicians to guarantee safe and appropriate use of devices and equipment. The administration of an institution has the primary responsibility for the visible implementation of risk and safety management. Also, the medical professional must become familiar with the principles of engineering and be trained in applying a systematic approach to safety and reliability within medical technology. This annual report provides recommendations on how to incorporate biomedical engineering into medical education.

  4. Assessment of coal technology options and implications for the State of Hawaii

    Energy Technology Data Exchange (ETDEWEB)

    Carlson, J.L.; Elcock, D.; Elliott, T.J. [and others

    1993-12-01

    The mandate of this research report was to provide the state of Hawaii with an assessment of the potential opportunities and drawbacks of relying on coal-fired generating technologies to diversify its fuel mix and satisfy future electric power requirements. This assessment was to include a review of existing and emerging coal-based power technologies-including their associated costs, environmental impacts, land use, and infrastructure requirements-to determine the range of impacts likely to occur if such systems were deployed in Hawaii. Coupled with this review, the report was also to (1) address siting and safety issues as they relate to technology choice and coal transport, (2) consider how environmental costs associated with coal usage are included in the integrated resource planning (ERP) process, and (3) develop an analytical tool from which the Department of Business, Economic Development & Tourism of the State of Hawaii could conduct first-order comparisons of power plant selection and siting. The prepared report addresses each element identified above. However, available resources and data limitations limited the extent to which particular characteristics of coal use could be assessed. For example, the technology profiles are current but not as complete regarding future developments and cost/emissions data as possible, and the assessment of coal technology deployment issues in Hawaii was conducted on an aggregate (not site-specific) basis. Nonetheless, the information and findings contained in this report do provide an accurate depiction of the opportunities for and issues associated with coal utilization in the state of Hawaii.

  5. Explaining technological change of wind power in China and the United States: Roles of energy policies, technological learning, and collaboration

    Science.gov (United States)

    Tang, Tian

    The following dissertation explains how technological change of wind power, in terms of cost reduction and performance improvement, is achieved in China and the US through energy policies, technological learning, and collaboration. The objective of this dissertation is to understand how energy policies affect key actors in the power sector to promote renewable energy and achieve cost reductions for climate change mitigation in different institutional arrangements. The dissertation consists of three essays. The first essay examines the learning processes and technological change of wind power in China. I integrate collaboration and technological learning theories to model how wind technologies are acquired and diffused among various wind project participants in China through the Clean Development Mechanism (CDM)--an international carbon trade program, and empirically test whether different learning channels lead to cost reduction of wind power. Using pooled cross-sectional data of Chinese CDM wind projects and spatial econometric models, I find that a wind project developer's previous experience (learning-by-doing) and industrywide wind project experience (spillover effect) significantly reduce the costs of wind power. The spillover effect provides justification for subsidizing users of wind technologies so as to offset wind farm investors' incentive to free-ride on knowledge spillovers from other wind energy investors. The CDM has played such a role in China. Most importantly, this essay provides the first empirical evidence of "learning-by-interacting": CDM also drives wind power cost reduction and performance improvement by facilitating technology transfer through collaboration between foreign turbine manufacturers and local wind farm developers. The second essay extends this learning framework to the US wind power sector, where I examine how state energy policies, restructuring of the electricity market, and learning among actors in wind industry lead to

  6. Imagining Nanotechnology: Cultural Support for technological Innovation in Europe and the United States

    OpenAIRE

    2005-01-01

    Abstract This paper compares public perceptions of technologies in the United States and Europe. Asked whether nanotechnology will improve our way of life, 50 percent of the US sample say ?yes? and 35 percent say ?don?t know.? The European figures are almost the mirror image, 29 percent saying ?yes? and 53 percent saying ?don?t know.? People in the US are also more opti...

  7. Impacts of reproductive technologies on beef production in the United States.

    Science.gov (United States)

    Dahlen, Carl; Larson, Jamie; Lamb, G Cliff

    2014-01-01

    Estimations of world population growth indicate that by the year 2050 we will reach nine billion habitants on earth. These estimates impose a tremendous challenge in the current agricultural systems as food supply will need to increase by 100 % in the next 40 years (Food and Agriculture Organization of the United Nations 2009). Beef will be a primary protein source that will assist in meeting the requirements for a portion of the protein in diets of this expanding global populace. Beef is a high-quality protein that contains all essential amino acids for the human body and also contains additional essential nutrients such as iron, zinc, B vitamins, riboflavin, selenium, choline, and conjugated linoleic acid (CLA). Adopting reproductive technologies at greater rates than currently used is a viable method to dramatically enhance production efficiency of beef cattle enterprises.Artificial insemination (AI), estrous synchronization and fixed-time AI (TAI), semen and embryo cryopreservation, multiple ovulation and embryo transfer (MOET), in vitro fertilization, sex determination of sperm or embryos, and nuclear transfer are technologies that are used to enhance the production efficiency of beef operations. In many cases, the development of these technologies is responsible for significant changes to traditional livestock production practices. However, adoption of these technologies appears to has not grown at the same rate in the United States as other formidable beef producing nations. For example, sales of beef semen for AI increased from 3.3 to 11.9 million units between 1993 and 2011 in Brazil, whereas that in the United States has increased from 2.9 to 3.8 million units during the same period. The significant increases in adoption of reproductive technologies in developing countries is likely as a result of the development of practical estrous synchronization and TAI systems that have allowed beef producers the opportunity to eliminate detection of estrus in their

  8. A state of the art on the chemical gel decontamination technology

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Chong Hun; Moon, J. K.; Won, H. J.; Lee, K. W.; Kim, C. K. [KAERI, Daejeon (Korea, Republic of)

    2010-12-15

    Overseas, highly radioactive hot cell facilities has been aging and was contaminated with radioactivity inside through reprocessing research activities. These facilities enhance the safety regulations and the need for change in any other purposes or complete demolition of these facilities, is growing. As the increase of the operation age of the domestic high radiation facilities such as IMEF, PIEF and DFDF, the necessity of decontamination and refurbishment of hot cells in these facilities is also increased. Since the hot cell facilities has the limited space of the highly radioactive, high removal efficiency(a high DF, rapid decontamination), the remote control, and minimization of the 2nd waste is essential as an effective decontamination technology. Chemical gel decontamination technology that has the characteristics of rapid removal from large contaminated area and no waste arising, has been developed as one of main decontamination technologies. In this study, chemical contamination and decontamination chemistry with respect to chemical gel decontamination are examined, and the gel manufacturing precursors and control factors of the gel viscosity is described. In the high radiation hot cell facilities of the United States, France and other countries overseas, demonstration and application cases on site, and R and D status of the chemical gel decontamination technology have been investigated. This requires the current level of technology and related research topics were derived

  9. Adoption of Improved Agroforestry Technologies among Contact Farmers in Imo State, Nigeria

    Directory of Open Access Journals (Sweden)

    Agomuo Florence Ozioma

    2012-03-01

    Full Text Available The study examined the adoption of improved agroforestry technologies among farmers in Imo State. To achieve the study objectives, structured questionnaire were designed and administered to ninety farmers who were selected using a multistage random sampling technique. Data collected were analysed using descriptive statistics regression analysis and Pearson product moment correlation (PPMC. Findings shows that the farmers were mainly small scale middle aged married men with secondary education and no access to credit. The average house hold size, farming experience and annual income of the farmers were 6 person, 15.5 years and N 148, 255.6 respectively with two contacts with extension agents on monthly basis. The results indicated that the farmers were largely aware of Gnetum Africana and have adopted plantain/banana technology. The mean adoption rate of agroforestry technologies was 33.81%. The main determinants of the adoption were farmers’ age, educational level, farm size, income, access to credit and extension contact as this variables were all significant. Apart from age of the farmers which was negatively related to adoption of agroforestry technologies all other variables mentioned affected the adoption rate of agroforestry technologies positively. Based on the findings, it was strongly recommended that farmers be provided with loans at concessionary interest rates to solve their financial problem of adopting innovations.

  10. Adoption of Improved Agroforestry Technologies among Contact Farmers in Imo State, Nigeria

    Directory of Open Access Journals (Sweden)

    Orisakwe Lambert

    2012-06-01

    Full Text Available The study examined the adoption of improved agroforestry technologies among farmers in Imo State. To achieve the study objectives, structured questionnaire were designed and administered to ninety farmers who were selected using a multistage random sampling technique. Data collected were analysed using descriptive statistics regression analysis and Pearson product moment correlation (PPMC. Findings shows that the farmers were mainly small scale middle aged married men with secondary education and no access to credit. The average house hold size, farming experience and annual income of the farmers were 6 person, 15.5 years and N 148,255.6 respectively with two contacts with extension agents on monthly basis. The results indicated that the farmers were largely aware of Gnetum Africana and have adopted plantain/banana technology. The mean adoption rate of agroforestry technologies was 33.81%. The main determinants of the adoption were farmers’ age, educational level, farm size, income, access to credit and extension contact as this variables were all significant. Apart from age of the farmers which was negatively related to adoption of agroforestry technologies all other variables mentioned affected the adoption rate of agroforestry technologies positively. Based on the findings, it was strongly recommended that farmers be provided with loans at concessionary interest rates to solve their financial problem of adopting innovations.

  11. States Monitoring Assisted Reproductive Technology (SMART) Collaborative: data collection, linkage, dissemination, and use.

    Science.gov (United States)

    Mneimneh, Allison S; Boulet, Sheree L; Sunderam, Saswati; Zhang, Yujia; Jamieson, Denise J; Crawford, Sara; McKane, Patricia; Copeland, Glenn; Mersol-Barg, Michael; Grigorescu, Violanda; Cohen, Bruce; Steele, JoAnn; Sappenfield, William; Diop, Hafsatou; Kirby, Russell S; Kissin, Dmitry M

    2013-07-01

    Assisted reproductive technology (ART) refers to fertility treatments in which both eggs and sperm are handled outside the body. The Centers for Disease Control and Prevention (CDC) oversees the National ART Surveillance System (NASS), which collects data on all ART procedures performed in the United States. The NASS, while a comprehensive source of data on ART patient demographics and clinical procedures, includes limited information on outcomes related to women's and children's health. To examine ART-related health outcomes, CDC and three states (Massachusetts, Florida, and Michigan) established the States Monitoring ART (SMART) Collaborative to evaluate maternal and perinatal outcomes of ART and improve state-based ART surveillance. To date, NASS data have been linked with states' vital records, disease registries, and hospital discharge data with a linkage rate of 90.2%. The probabilistic linkage methodology used in the SMART Collaborative has been validated and found to be both accurate and efficient. A wide breadth of applied research within the Collaborative is planned or ongoing, including examinations of the impact of insurance mandates on ART use as well as the relationships between ART and birth defects and cancer, among others. The SMART Collaborative is working to improve state-based ART surveillance by developing state surveillance plans, establishing partnerships, and conducting data analyses. The SMART Collaborative has been instrumental in creating linked datasets and strengthening epidemiologic and research capacity for improving maternal and infant health programs and evaluating the public health impact of ART.

  12. Technology and place: A geography of waste-to-energy in the United States

    Science.gov (United States)

    Howell, Jordan Patterson

    The adoption of technologies differs across space, for reasons attributed to economics, politics, and culture, but also due to limitations imposed by both the physical environment and the technology itself. This dissertation considers the case of waste-to-energy (WTE) incinerators in the United States, and asks why this technology is used in some places but rejected in others. The answer to this simple question is remarkably complex, as understandings and arguments about technology and the environment are mobilized differently by various actors to champion, oppose, or in some cases remain ambivalent about the installation and operation of WTE facilities. In this dissertation I explore the geography of WTE incineration in the United States since the 19th century. Informed by the insights of actor-network theory and the social construction of technology school, I employ the tools of discourse analysis to examine published and unpublished statements, papers, project studies, policy briefs, and archival materials generated alongside the development of WTE facilities in the United States, considering the specific case studies discussed below but also WTE technology in general. I look at federal, state, and local environmental agency documents as well as the papers of consulting firms, environmental and industry advocacy groups, and private companies. I also devote significant attention to the analysis of news media outlets in communities where WTE facilities are located or have been considered. In addition to these literal texts, I examine non-written and visual materials associated with WTE facilities, including films, websites, signage and logos, advertising campaigns, facility architecture, and artwork, as well as more abstract `texts' such as industry conferences, trade-show handouts, promotional materials, and academic and industry research programs. I build on this textual analysis with observations of WTE facilities in action. After an introductory chapter, I

  13. Industrial property for science’s management, technology and innovation in Cuban State companies

    Directory of Open Access Journals (Sweden)

    Dulce María Contreras Villavicencio

    2017-08-01

    Full Text Available The paper synthesizes some research on industrial property aspects from the socio-legal perspective and financial accounting. Its focus to the socialist state enterprise adaptation in his economic fact, social and environmental responsibility as a fundamental Cuban model reach, competitiveness and high performance in socialist state enterprise. It outlines criteria on the ordering and implementation of industrial property through the management of science and technology, protection and dissemination of knowledge results as alternatives of regulation in chain of value to full cycle of innovation, dynamics of intangible heritage and relationships, exchange with marketing as business philosophy of business application. Strategies are proposed regarding the rights of this institution in the economic-organization management state.

  14. Characterization of oil and gas reservoirs and recovery technology deployment on Texas State Lands

    Energy Technology Data Exchange (ETDEWEB)

    Tyler, R.; Major, R.P.; Holtz, M.H. [Univ. of Texas, Austin, TX (United States)] [and others

    1997-08-01

    Texas State Lands oil and gas resources are estimated at 1.6 BSTB of remaining mobile oil, 2.1 BSTB, or residual oil, and nearly 10 Tcf of remaining gas. An integrated, detailed geologic and engineering characterization of Texas State Lands has created quantitative descriptions of the oil and gas reservoirs, resulting in delineation of untapped, bypassed compartments and zones of remaining oil and gas. On Texas State Lands, the knowledge gained from such interpretative, quantitative reservoir descriptions has been the basis for designing optimized recovery strategies, including well deepening, recompletions, workovers, targeted infill drilling, injection profile modification, and waterflood optimization. The State of Texas Advanced Resource Recovery program is currently evaluating oil and gas fields along the Gulf Coast (South Copano Bay and Umbrella Point fields) and in the Permian Basin (Keystone East, Ozona, Geraldine Ford and Ford West fields). The program is grounded in advanced reservoir characterization techniques that define the residence of unrecovered oil and gas remaining in select State Land reservoirs. Integral to the program is collaboration with operators in order to deploy advanced reservoir exploitation and management plans. These plans are made on the basis of a thorough understanding of internal reservoir architecture and its controls on remaining oil and gas distribution. Continued accurate, detailed Texas State Lands reservoir description and characterization will ensure deployment of the most current and economically viable recovery technologies and strategies available.

  15. Current State of Technology of Fuel Cell Power Systems for Autonomous Underwater Vehicles

    Directory of Open Access Journals (Sweden)

    Alejandro Mendez

    2014-07-01

    Full Text Available Autonomous Underwater Vehicles (AUVs are vehicles that are primarily used to accomplish oceanographic research data collection and auxiliary offshore tasks. At the present time, they are usually powered by lithium-ion secondary batteries, which have insufficient specific energies. In order for this technology to achieve a mature state, increased endurance is required. Fuel cell power systems have been identified as an effective means to achieve this endurance but no implementation in a commercial device has yet been realized. This paper summarizes the current state of development of the technology in this field of research. First, the most adequate type of fuel cell for this application is discussed. The prototypes and design concepts of AUVs powered by fuel cells which have been developed in the last few years are described. Possible commercial and experimental fuel cell stack options are analyzed, examining solutions adopted in the analogous aerial vehicle applications, as well as the underwater ones, to see if integration in an AUV is feasible. Current solutions in oxygen and hydrogen storage systems are overviewed and energy density is objectively compared between battery power systems and fuel cell power systems for AUVs. A couple of system configuration solutions are described including the necessary lithium-ion battery hybrid system. Finally, some closing remarks on the future of this technology are given.

  16. Technology-based innovation for independent living: policy and innovation in the United Kingdom, Scandinavia, and the United States.

    Science.gov (United States)

    Berridge, Clara; Furseth, Peder Inge; Cuthbertson, Richard; Demello, Steven

    2014-01-01

    Interest in utilizing technology to help older adults remain living at home is growing; however, uptake remains low. We present a conceptual framework for understanding independent living technology innovation within health and social services. Public policy and innovation in the United States, the United Kingdom, and Scandinavia are profiled as case studies. In all profiled countries, independent living technology is more rapidly advancing than associated state policy, regulation, and payment systems. The findings from this comparative analysis reveal areas for further exploration, including policy subsystem environments in which technologies and services are regulated, as well as trends and desires of older adults and their caregivers within particular cultural contexts.

  17. Gender analysis of technology utilisation among small scale oil palm fruits processors in Ondo State, Nigeria

    Directory of Open Access Journals (Sweden)

    Koledoye Gbenga F.

    2015-01-01

    Full Text Available The study identified the types of improved technologies utilised, tracked gender involvement at the various stages of oil palm fruits processing activities with a view to highlighting differences in the utilisation of these technologies among male and female processors. Multistage sampling technique was used to select 240 (120 males and 120 females oil palm fruits processors using structured interview schedule. Focus Group Discussion (FGD and Gender Mapping (GM were used to elicit qualitative data. Data collected were summarised with the aid of descriptive statistics while t-test was used to test the hypothesis. Results showed that sterilizer, digester and hydraulic hand press were utilised by both male and female processors. Results of t-test revealed that at P ≤ 0.01, significant differences were found between male and female processors level of utilisation of oil palm processing technologies with male having a higher mean score than the female. The study concluded that gender differences exited in the level of utilisation of oil palm processing technologies among male and female processors in Ondo State, Nigeria.

  18. THE ECONOMIC IMPACT OF IMPROVED AGRICULTURAL TECHNOLOGY ON CASSAVA PRODUCTIVITY IN KOGI STATE OF NIGERIA

    Directory of Open Access Journals (Sweden)

    Ilemona Adofu

    2013-07-01

    Full Text Available This paper assessed the economic impact of improved agricultural technologies on cassava productivity in Kogi State, Nigeria. The results are drawn from a household survey covering the agricultural season of 2009/2010. The data obtained from interview schedule was subjected to descriptive and inferential statistical analysis. Descriptive statistics for this study include frequency, percentages and means. The hypothesis was tested using chisquare. The result shows that 79.33% of the respondents adopt the use of improved variety within the period under study. The analysis done on the revenue of the respondents before and after the adoption of the improved agricultural technology shows that revenue of farmers after the adoption of innovations are better off than revenue generated before adoption by N27,750 on the average per farmer. This result shows that the impact of improved agricultural technologies on cassava productivity is positive. Additionally, the results attest to the importance of increasing agricultural productivity in tandem with improvements on the adoption and use of improved agricultural technologies and its availability to the reach of farmers with the farmers’ ability to store food. This findings is consistence with Idachaba and Ayoola, (1995 who observed that improved agricultural helped in increasing agricultural productivity.

  19. TECHNOLOGY MANAGEMENT: AN EXPLORATION ON THE USE OF SOCIAL NETWORKS BY THE STATE GOVERNMENTS IN MEXICO

    Directory of Open Access Journals (Sweden)

    Rodrigo Sansovál-Almazán

    2012-12-01

    Full Text Available The influence of technology in public administration has marked a new stage for the governments of the World. The strategy, known as e-Government, has to varying degrees impacted the way public offices are organized, the relationship with the citizens and the structure of public administration at its different levels. However, this impact has not been sufficiently measured and there is little evidence in this regard. One of the most innovative elements in this government transformation is social networking. The impact of these platforms –such as Twitter and Facebook– in communication and government operations has shifted the way in which information and communication technologies have changed the citizen-government relationship. The aim of this paper is to understand to what extent both these platforms are used in the 32 Mexican state portals and see how this use has evolved between 2010 and 2011.

  20. Efficient thermal desalination technologies with renewable energy systems: A state-of-the-art review

    Energy Technology Data Exchange (ETDEWEB)

    Esfahani, Iman Janghorban; Rashidi, Jouan; Ifaei, Pouya; Yoo, ChangKyoo [Center for Environmental Studies, Kyung Hee University, Yongin (Korea, Republic of)

    2016-02-15

    Due to the current fossil fuel crisis and associated adverse environmental impacts, renewable energy sources (RES) have drawn interest as alternatives to fossil fuels for powering water desalination systems. Over the last few decades the utility of renewable energy sources such as solar, geothermal, and wind to run desalination processes has been explored. However, the expansion of these technologies to larger scales is hampered by techno-economic and thermo-economic challenges. This paper reviews the state-of-the-art in the field of renewable energy-powered thermal desalination systems (RE-PTD) to compare their productivity and efficiency through thermodynamic, economic, and environmental analyses. We performed a comparative study using published data to classify RE-PTD systems technologies on the basis of the energy collection systems that they use. Among RE-PTD systems, solar energy powered-thermal desalination systems demonstrate high thermo-environ-economic efficiency to produce fresh water to meet various scales of demand.

  1. Ceramic dental biomaterials and CAD/CAM technology: state of the art.

    Science.gov (United States)

    Li, Raymond Wai Kim; Chow, Tak Wah; Matinlinna, Jukka Pekka

    2014-10-01

    Ceramics are widely used as indirect restorative materials in dentistry because of their high biocompatibility and pleasing aesthetics. The objective is to review the state of the arts of CAD/CAM all-ceramic biomaterials. CAD/CAM all-ceramic biomaterials are highlighted and a subsequent literature search was conducted for the relevant subjects using PubMed followed by manual search. Developments in CAD/CAM technology have catalyzed researches in all-ceramic biomaterials and their applications. Feldspathic glass ceramic and glass infiltrated ceramic can be fabricated by traditional laboratory methods or CAD/CAM. The advent of polycrystalline ceramics is a direct result of CAD/CAM technology without which the fabrication would not have been possible. The clinical uses of these ceramics have met with variable clinical success. Multiple options are now available to the clinicians for the fabrication of aesthetic all ceramic restorations. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  2. Technology Integration around the Geographic Information: A State of the Art

    CERN Document Server

    Ponce-Medellin, Rafael; Vargas, Rocio; Ruiz, Lirio

    2009-01-01

    One of the elements that have popularized and facilitated the use of geographical information on a variety of computational applications has been the use of Web maps; this has opened new research challenges on different subjects, from locating places and people, the study of social behavior or the analyzing of the hidden structures of the terms used in a natural language query used for locating a place. However, the use of geographic information under technological features is not new, instead it has been part of a development and technological integration process. This paper presents a state of the art review about the application of geographic information under different approaches: its use on location based services, the collaborative user participation on it, its contextual-awareness, its use in the Semantic Web and the challenges of its use in natural languge queries. Finally, a prototype that integrates most of these areas is presented.

  3. Technology Integration around the Geographic Information: A State of the Art

    Directory of Open Access Journals (Sweden)

    Rocio Vargas

    2009-10-01

    Full Text Available One of the elements that have popularized and facilitated the use of geographical information on a variety of computational applications has been the use of Web maps; this has opened new research challenges on different subjects, from locating places and people, the study of social behavior or the analyzing of the hidden structures of the terms used in a natural language query used for locating a place. However, the use of geographic information under technological features is not new, instead it has been part of a development and technological integration process. This paper presents a state of the art review about the application of geographic information under different approaches: its use on location based services, the collaborative user participation on it, its contextual-awareness, its use in the Semantic Web and the challenges of its use in natural language queries. Finally, a prototype that integrates most of these areas is presented.

  4. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-19

    This volume of the 4-volume ISTUM documentation gives information on the individual technology specifications. The first chapter presents a general overview of the ISTUM technology data bases. It includes an explanation of the data-base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters document the specific-technology-cost specifications. Boiler technologies (conventional coal steam, conventional natural gas and oil in the steam-service sector, black liquor and wood boilers, and space-heat service sector) and non-boiler conventional technologies (natural gas non-boiler, oil-fired non-boiler, coal-fired non-boiler technologies and non-boiler primary system costs) are covered in Chapter II. Chapter III, Fossil Energy Technologies, covers atmospheric fluidized-bed combustion, low-Btu gasification of coal, and medium-Btu gasification. Chapter IV, Cogeneration and Self-Generation Technologies, covers the steam service sector, machine-drive service sector, and electrolytic service sector. Solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies) are covered in Chapter V, while Chapter VI covers conservation technologies. (MCW)

  5. Report to the United States Congress clean coal technology export markets and financing mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    This report responds to a Congressional Conference Report that requests that $625,000 in funding provided will be used by the Department to identify potential markets for clean coal technologies in developing countries and countries with economies in transition from nonmarket economies and to identify existing, or new, financial mechanisms or financial support to be provided by the Federal government that will enhance the ability of US industry to participate in these markets. The Energy Information Administration (EIA) expects world coal consumption to increase by 30 percent between 1990 and 2010, from 5.1 to 6.5 billion short tons. Five regions stand out as major foreign markets for the export of US clean coal technologies: China; The Pacific Rim (other than China); South Asia (primarily India); Transitional Economies (Central Europe and the Newly Independent States); and Other Markets (the Americas and Southern Africa). Nearly two-thirds of the expected worldwide growth in coal utilization will occur in China, one quarter in the United States. EIA forecasts nearly a billion tons per year of additional coal consumption in China between 1990 and 2010, a virtual doubling of that country`s coal consumption. A 30-percent increase in coal consumption is projected in other developing countries over that same period. This increase in coal consumption will be accompanied by an increase in demand for technologies for burning coal cost-effectively, efficiently and cleanly. In the Pacific Rim and South Asia, rapid economic growth coupled with substantial indigenous coal supplies combine to create a large potential market for CCTS. In Central Europe and the Newly Independent States, the challenge will be to correct the damage of decades of environmental neglect without adding to already-considerable economic disruption. Though the situation varies, all these countries share the basic need to use indigenous low-quality coal cleanly and efficiently.

  6. Competing with the Soviets science, technology, and the state in Cold War America

    CERN Document Server

    Wolfe, Audra J

    2013-01-01

    For most of the second half of the twentieth century, the United States and its allies competed with a hostile Soviet Union in almost every way imaginable except open military engagement. The Cold War placed two opposite conceptions of the good society before the uncommitted world and history itself, and science figured prominently in the picture. Competing with the Soviets offers a short, accessible introduction to the special role that science and technology played in maintaining state power during the Cold War, from the atomic bomb to the Human Genome Project. The high-tech machinery of nuclear physics and the space race are at the center of this story, but Audra J. Wolfe also examines the surrogate battlefield of scientific achievement in such diverse fields as urban planning, biology, and economics; explains how defense-driven federal investments created vast laboratories and research programs; and shows how unfamiliar worries about national security and corrosive questions of loyalty crept into the sup...

  7. Argonne National Laboratory study of the transfer of federal computational technology to manufacturing industry in the State of Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, C.J.

    1991-11-01

    This report describes a pilot study to develop, initiate the implementation, and document a process to identify computational technology capabilities resident within Argonne National Laboratory to small and medium-sized businesses in the State of Michigan. It is a derivative of a program entitled ``Technology Applications Development Process for the State of Michigan`` undertaken by the Industrial Technology Institute and MERRA under funding from the National Institute of Standards and Technology. The overall objective of the latter program is to develop procedures which can facilitate the discovery and commercialization of new technologies for the benefit of small and medium-size manufacturing firms. Federal laboratories such as Argonne, along with universities, have been identified by the Industrial Technology Institute as key sources of technology which can be profitably commercialized by the target firms. The scope of this study limited the investigation of technology areas for technology transfer to that of computational science and engineering featuring high performance computing. This area was chosen as the broad technological capability within Argonne to investigate for technology transfer to Michigan firms for several reasons. First, and most importantly, as a multidisciplinary laboratory, Argonne has the full range of scientific and engineering skills needed to utilize leading-edge computing capabilities in many areas of manufacturing.

  8. Argonne National Laboratory study of the transfer of federal computational technology to manufacturing industry in the State of Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, C.J.

    1991-11-01

    This report describes a pilot study to develop, initiate the implementation, and document a process to identify computational technology capabilities resident within Argonne National Laboratory to small and medium-sized businesses in the State of Michigan. It is a derivative of a program entitled Technology Applications Development Process for the State of Michigan'' undertaken by the Industrial Technology Institute and MERRA under funding from the National Institute of Standards and Technology. The overall objective of the latter program is to develop procedures which can facilitate the discovery and commercialization of new technologies for the benefit of small and medium-size manufacturing firms. Federal laboratories such as Argonne, along with universities, have been identified by the Industrial Technology Institute as key sources of technology which can be profitably commercialized by the target firms. The scope of this study limited the investigation of technology areas for technology transfer to that of computational science and engineering featuring high performance computing. This area was chosen as the broad technological capability within Argonne to investigate for technology transfer to Michigan firms for several reasons. First, and most importantly, as a multidisciplinary laboratory, Argonne has the full range of scientific and engineering skills needed to utilize leading-edge computing capabilities in many areas of manufacturing.

  9. High-Efficiency, Ka-band Solid-State Power Amplifier Utilizing GaN Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — QuinStar Technology proposes to develop an efficient, solid-state power amplifier (SSPA), operating at Ka-band frequencies, for high data rate, long range space...

  10. An Examination of Information Technology and Its Perceived Quality Issues in Single System Hospitals in the United States

    Science.gov (United States)

    Byrd, Linda W.

    2009-01-01

    The safety and quality of healthcare is of great concern in the United States. The positive effects of information technology reported in past research, especially case studies, has encouraged expectations that information technology may increase the quality of healthcare while reducing costs of healthcare. The goals of this study was to examine…

  11. Emerging and Disruptive Technologies for Education: An Analysis of Planning, Implementation, and Diffusion in Florida's Eleven State University System Institutions

    Science.gov (United States)

    Bradford, Deborah J.

    2010-01-01

    The purpose of the study was to understand and appreciate the methodologies and procedures used in determining the extent to which an information technology (IT) organization within the eleven member State University Systems (SUS) of Florida planned, implemented, and diffused emerging educational technologies. Key findings found how critical it…

  12. Symbol RFID Technology to be Deployed at United States Defense Logistics Agency’s Distribution Centers Worldwide

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Symbol Technologies, Inc., The Enterprise Mobility Company, today announced that it had been selected by ODIN technologies, the leader in the physics of RFID testing, software and deployment, to support its recent contract win with the United States Defense Logistics Agency (DLA), the United States Department of Defense’s (DoD) logistics combat support agency that provides supplies and services to America’s military forces worldwide.

  13. Design of defect spins in piezoelectric aluminum nitride for solid-state hybrid quantum technologies

    Science.gov (United States)

    Seo, Hosung; Govoni, Marco; Galli, Giulia

    2016-02-01

    Spin defects in wide-band gap semiconductors are promising systems for the realization of quantum bits, or qubits, in solid-state environments. To date, defect qubits have only been realized in materials with strong covalent bonds. Here, we introduce a strain-driven scheme to rationally design defect spins in functional ionic crystals, which may operate as potential qubits. In particular, using a combination of state-of-the-art ab-initio calculations based on hybrid density functional and many-body perturbation theory, we predicted that the negatively charged nitrogen vacancy center in piezoelectric aluminum nitride exhibits spin-triplet ground states under realistic uni- and bi-axial strain conditions; such states may be harnessed for the realization of qubits. The strain-driven strategy adopted here can be readily extended to a wide range of point defects in other wide-band gap semiconductors, paving the way to controlling the spin properties of defects in ionic systems for potential spintronic technologies.

  14. Design of defect spins in piezoelectric aluminum nitride for solid-state hybrid quantum technologies.

    Science.gov (United States)

    Seo, Hosung; Govoni, Marco; Galli, Giulia

    2016-02-15

    Spin defects in wide-band gap semiconductors are promising systems for the realization of quantum bits, or qubits, in solid-state environments. To date, defect qubits have only been realized in materials with strong covalent bonds. Here, we introduce a strain-driven scheme to rationally design defect spins in functional ionic crystals, which may operate as potential qubits. In particular, using a combination of state-of-the-art ab-initio calculations based on hybrid density functional and many-body perturbation theory, we predicted that the negatively charged nitrogen vacancy center in piezoelectric aluminum nitride exhibits spin-triplet ground states under realistic uni- and bi-axial strain conditions; such states may be harnessed for the realization of qubits. The strain-driven strategy adopted here can be readily extended to a wide range of point defects in other wide-band gap semiconductors, paving the way to controlling the spin properties of defects in ionic systems for potential spintronic technologies.

  15. UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT TECHNOLOGY DEVELOPMENT REPORT FISCAL YEAR 2010

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S.

    2010-10-22

    The mission of the Department of Energy's (DOE's) Office of Environmental Management (EM) is to clean up the environmental legacy of nuclear weapons research and production during the Cold War. That mission includes cleaning up nuclear waste, contaminated groundwater and soil, nuclear materials, and contaminated facilities covering two million acres of land in thirty-five states. EM's principal program goals include timely completion of tank waste treatment facilities, reduction of the life-cycle costs and acceleration of the cleanup of the Cold War legacy, and reduction of the EM footprint. The mission of the EM Technology Innovation and Development program is to transform science and innovation into practical solutions to achieve the EM mission. During fiscal year 2010 (October 2009-September 2010), EM focused upon accelerating environmental cleanup by expeditiously filling identified gaps in available knowledge and technology in the EM program areas. This report describes some of the approaches and transformational technologies in tank waste processing, groundwater and soil remediation, nuclear materials disposition, and facility deactivation and decommissioning developed during fiscal year 2010 that will enable EM to meet its most pressing program goals.

  16. Joining technologies for the 1990s: Welding, brazing, soldering, mechanical, explosive, solid-state, adhesive

    Energy Technology Data Exchange (ETDEWEB)

    Buckley, J.D.; Stein, B.A.

    1986-01-01

    This book presents recent advances in joining technologies for the 1990s-welding, brazing, soldering, mechanical fastening, explosive welding, solid-state bonding, and adhesive bonding. A major consideration in the fabrication of any commercial, military, or space product is attachment systems which are safe and reliable. The subject matter covered includes technology developed in current research programs relevant to welding, bonding, and fastening of structural materials, for fabricating structures and mechanical systems use in the aerospace, automotive, and related industries. Specific topics include equipment, hardware and materials used when welding, brazing, and soldering; mechanical fastening; explosive welding; use of unique selected joining techniques; adhesive bonding; and nondestructive evaluation. ''The Factory of the Future'' is presented, followed by advanced welding techniques, automated equipment for welding, welding in a cryogenic atmosphere, blind fastening, stress corrosion resistant fasteners, fastening equipment, explosive welding of different configurations and materials, solid-state bonding, electron beam welding, new adhesives, effects of cryogenics on adhesives, and new techniques and equipment for adhesive bonding.

  17. Challenges and the state of the technology for printed sensor arrays for structural monitoring

    Science.gov (United States)

    Joshi, Shiv; Bland, Scott; DeMott, Robert; Anderson, Nickolas; Jursich, Gregory

    2017-04-01

    Printed sensor arrays are attractive for reliable, low-cost, and large-area mapping of structural systems. These sensor arrays can be printed on flexible substrates or directly on monitored structural parts. This technology is sought for continuous or on-demand real-time diagnosis and prognosis of complex structural components. In the past decade, many innovative technologies and functional materials have been explored to develop printed electronics and sensors. For example, an all-printed strain sensor array is a recent example of a low-cost, flexible and light-weight system that provides a reliable method for monitoring the state of aircraft structural parts. Among all-printing techniques, screen and inkjet printing methods are well suited for smaller-scale prototyping and have drawn much interest due to maturity of printing procedures and availability of compatible inks and substrates. Screen printing relies on a mask (screen) to transfer a pattern onto a substrate. Screen printing is widely used because of the high printing speed, large selection of ink/substrate materials, and capability of making complex multilayer devices. The complexity of collecting signals from a large number of sensors over a large area necessitates signal multiplexing electronics that need to be printed on flexible substrate or structure. As a result, these components are subjected to same deformation, temperature and other parameters for which sensor arrays are designed. The characteristics of these electronic components, such as transistors, are affected by deformation and other environmental parameters which can lead to erroneous sensed parameters. The manufacturing and functional challenges of the technology of printed sensor array systems for structural state monitoring are the focus of this presentation. Specific examples of strain sensor arrays will be presented to highlight the technical challenges.

  18. STATE OF THE ART AND FUTURE DEVELOPMENTS IN NATURAL GAS ENGINE TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, M

    2003-08-24

    Current, state of the art natural gas engines provide the lowest emission commercial technology for use in medium heavy duty vehicles. NOx emission levels are 25 to 50% lower than state of the art diesel engines and PM levels are 90% lower than non-filter equipped diesels. Yet, in common with diesel engines, natural gas engines are challenged to become even cleaner and more efficient to meet environmental and end-user demands. Cummins Westport is developing two streams of technologies to achieve these goals for medium-heavy and heavy-heavy duty applications. For medium-heavy duty applications, lowest possible emissions are sought on SI engines without significant increase in complexity and with improvements in efficiency and BMEP. The selected path builds on the capabilities of the CWI Plus technology and recent diesel engine advances in NOx controls, providing potential to reduce emissions to 2010 values in an accelerated manner and without the use of Selective Catalytic Reduction or NOx Storage and Reduction technology. For heavy-heavy duty applications where high torque and fuel economy are of prime concern, the Westport-Cycle{trademark} technology is in field trial. This technology incorporates High Pressure Direct Injection (HPDI{trademark}) of natural gas with a diesel pilot ignition source. Both fuels are delivered through a single, dual common rail injector. The operating cycle is entirely unthrottled and maintains the high compression ratio of a diesel engine. As a result of burning 95% natural gas rather than diesel fuel, NOx emissions are halved and PM is reduced by around 70%. High levels of EGR can be applied while maintaining high combustion efficiency, resulting in extremely low NOx potential. Some recent studies have indicated that DPF-equipped diesels emit less nanoparticles than some natural gas vehicles [1]. It must be understood that the ultrafine particles emitted from SI natural gas engines are generally accepted to consist predominantly of

  19. Research on evaluation model of technology innovation ability of state-owned enterprises in northeast industry base

    Institute of Scientific and Technical Information of China (English)

    CHEN Hongguang; QI Guoyou; ZHANG Ning

    2007-01-01

    The paper viewed the current problem that state-owned enterprises in northeast industry base hadn't technologies of their own intellectual property right, whose sources mainly depended on imitation and introduction from abroad. Operational evaluation method and index criteria system of enterprises technology innovation ability were put forward in this paper, different enterprises may revise the model according to their actual situations to evaluate the enterprise technological innovation ability scientifically and quickly. The findings will be helpful to correlative departments to formulate the related policies and also has important theoretical and practical value in technological innovation project of enterprise.

  20. Application of ICT (Information and Communication Technology) in the Management of Universities in the North-Central State of Nigeria

    Science.gov (United States)

    Oboegbulem, Angie Ijeoma; Godwin, Ochai

    2013-01-01

    This study investigated the application of ICT (information and communication technology) in the management of universities in the north-central Nigeria. The study was a descriptive survey. The population of the study comprised 1,294 respondents in federal and state universities (763 in federal and 531 in state universities). The sample size…

  1. Technology assessment of vertical and horizontal air drilling potential in the United States. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Carden, R.S.

    1993-08-18

    The objective of the research was to assess the potential for vertical, directional and horizontal air drilling in the United States and to evaluate the current technology used in air drilling. To accomplish the task, the continental United States was divided into drilling regions and provinces. The map in Appendix A shows the divisions. Air drilling data were accumulated for as many provinces as possible. The data were used to define the potential problems associated with air drilling, to determine the limitations of air drilling and to analyze the relative economics of drilling with air versus drilling mud. While gathering the drilling data, operators, drilling contractors, air drilling contractors, and service companies were contacted. Their opinion as to the advantages and limitations of air drilling were discussed. Each was specifically asked if they thought air drilling could be expanded within the continental United States and where that expansion could take place. The well data were collected and placed in a data base. Over 165 records were collected. Once in the data base, the information was analyzed to determine the economics of air drilling and to determine the limiting factors associated with air drilling.

  2. Benefits to the United States of Increasing Global Uptake of Clean Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kline, D.

    2010-07-01

    A previous report describes an opportunity for the United States to take leadership in efforts to transform the global energy system toward clean energy technologies (CET). An accompanying analysis to that report provides estimates of the economic benefits to the United States of such a global transformation on the order of several hundred billion dollars per year by 2050. This report describes the methods and assumptions used in developing those benefit estimates. It begins with a summary of the results of the analysis based on an updated and refined model completed since the publication of the previous report. The framework described can be used to estimate the economic benefits to the U.S. of coordinated global action to increase the uptake of CETs worldwide. Together with a Monte Carlo simulation engine, the framework can be used to develop plausible ranges for benefits, taking into account the large uncertainty in the driving variables and economic parameters. The resulting estimates illustrate that larger global clean energy markets offer significant opportunities to the United States economy.

  3. Trends in Energy Management Technology - Part 3: State of Practiceof Energy Management, Control, and Information Systems

    Energy Technology Data Exchange (ETDEWEB)

    Yee, Gaymond; Webster, Tom

    2004-02-01

    In this report, the third in a series, we provide an evaluation of several products that exemplify the current state of practice of Energy Management, Control, and Information Systems (EMCIS). The available features for these products are summarized and analyzed with regard to emerging trends in EMCIS and potential benefits to the federal sector. The first report [1] covered enabling technologies for emerging energy management systems. The second report [2] serves as a basic reference for building control system (BCS) networking fundamentals and includes an assessment of current approaches to open communications. Part 4 of this series will discuss applications software from a user's perspective. It is important for energy managers in the Federal sector to have a high level of knowledge and understanding of these complex energy management systems. This series of reports provides energy practitioners with some basic informational and educational tools to help make decisions relative to energy management systems design, specification, procurement, and energy savings potential.

  4. State-of-the-art technology in modern computer-aided drug design.

    Science.gov (United States)

    Dalkas, Georgios A; Vlachakis, Dimitrios; Tsagkrasoulis, Dimosthenis; Kastania, Anastasia; Kossida, Sophia

    2013-11-01

    The quest for small drug-like compounds that selectively inhibit the function of biological targets has always been a major focus in the pharmaceutical industry and in academia as well. High-throughput screening of compound libraries requires time, cost and resources. Therefore, the use of alternative methods is necessary for facilitating lead discovery. Computational techniques that dock small molecules into macromolecular targets and predict the affinity and activity of the small molecule are widely used in drug design and discovery, and have become an integral part of the industrial and academic research. In this review, we present an overview of some state-of-the-art technologies in modern drug design that have been developed for expediting the search for novel drug candidates.

  5. Aeroelastic Tailoring of Transport Aircraft Wings: State-of-the-Art and Potential Enabling Technologies

    Science.gov (United States)

    Jutte, Christine; Stanford, Bret K.

    2014-01-01

    This paper provides a brief overview of the state-of-the-art for aeroelastic tailoring of subsonic transport aircraft and offers additional resources on related research efforts. Emphasis is placed on aircraft having straight or aft swept wings. The literature covers computational synthesis tools developed for aeroelastic tailoring and numerous design studies focused on discovering new methods for passive aeroelastic control. Several new structural and material technologies are presented as potential enablers of aeroelastic tailoring, including selectively reinforced materials, functionally graded materials, fiber tow steered composite laminates, and various nonconventional structural designs. In addition, smart materials and structures whose properties or configurations change in response to external stimuli are presented as potential active approaches to aeroelastic tailoring.

  6. Isolated Solid-State Packaging Technology of High-Temperature Pressure Sensor

    Institute of Scientific and Technical Information of China (English)

    张生才; 金鹏; 姚素英; 赵毅强; 曲宏伟

    2003-01-01

    The principle of miniature isolated solid-state encapsulation technology of high-temperature pressure sensor and the structure of packaging are discussed, including static electricity bonding, stainless steel diaphragm selection and rippled design, laser welding, silicon oil infilling, isolation and other techniques used in sensor packaging, which can affect the performance of the sensor. By adopting stainless steel diaphragm and high-temperature silicon oil as isolation materials, not only the encapsulation of the sensor is as small as 15 mm in diameter and under 1 mA drive, its full range output is 72 mV and zero stability is 0.48% F.S/mon, but also the reliability of the sensor is improved and its application is widely broadened.

  7. Research on the gear operating state detection based on the fiber Bragg grating sensing technology

    Science.gov (United States)

    Liu, Yijun; Zhang, Wenying; Jin, Zhouyi; Liu, Jiapei; Li, Mingyue; Li, Xin; Geng, Biao; Dong, Bo

    2017-09-01

    With the development of people’s production and the accelerated growth of industrial demand, industrial manufacturers continue to improve the level of real-time detection of gear requirements. In order to improve the safety of mechanical equipment and to reduce the gear failure of the economic losses, the real-time monitoring of gear running technology is of a positive meaning. Based on the existing research results of gear dynamic detection, this paper proposes a fiber-optic grating sense of the gear operating state detection system. Stress tests were performed by varying the different load torques. The experimental results show that at the load of 10Nm and the rotating speed of 70r/min, the dedendum stress reached 130.4MPa. Compared with the theoretical value, the test error was 6.66%.

  8. The state-of-the-art laser bio-cladding technology

    Science.gov (United States)

    Liu, Jichang; Fuh, J. Y. H.; Lü, L.

    2010-11-01

    The current state and future trend of laser bio-cladding technology are discussed. Laser bio-cladding is used in implants including fabrication of metal scaffolds and bio-coating on the scaffolds. Scaffolds have been fabricated from stainless steel, Co-based alloy or Ti alloy using laser cladding, and new laser-deposited Ti alloys have been developed. Calcium phosphate bioceramic coatings have been deposited on scaffolds with laser to improve the wear resistence and corrosion resistence of implants and to induce bone regeneration. The types of biomaterial devices currently available in the market include replacement heart valve prosthesis, dental implants, hip/knee implants, catheters, pacemakers, oxygenators and vascular grafts. Laser bio-cladding process is attracting more and more attentions of people.

  9. Applying Interactive Planning on Science and Technology Policy in State Personnel Agency

    Directory of Open Access Journals (Sweden)

    Himsar Silaban

    2016-10-01

    Full Text Available People’s stereotypes on the implementation of public services, especially in personnel services in general, particularly in Indonesia, mostly concern with bureaucratic hassle, since it is considered incapable of providing sufficient information, lack of transparency, and slow. The efforts to fix the stereotypes are incessantly conducted by the government through Good Governance in the field of information technology. Today, the role of information technology management must be more strategic in building the personnel data management system. The Government of Indonesia develops an online-based Personnel Service Application System (SAPK that makes it a center for personnel needs management, career development, retirement, and personnel data update. SAPK is a new opportunity to create intellectual capital and provide a way for employees to contribute to the organization. In this paper, to determine the appropriate action of decision making, the interactive planning method is used as a draft of future design, based on current real conditions. The use of interactive planning method is believed to be the appropriate way to see the possibility of program or activity implementation. The results of this study demonstrate the technological use of Personnel Service Application System (SAPK makes the personnel management a unified whole and centralized, easily researched and managed. Employees are also encouraged to be more active and independent in self- and knowledge- development. SAPK has the potential to make the time of document processing efficient and to improve the accuracy of data; and to make personnel skill improvement effective and to make decisions making timelier. By using interactive planning, the picture of future planning design is more visible, based on current real issues of State Personnel Agency (BKN.

  10. Application of space technologies for the purpose of education at the Belarusian state university

    Science.gov (United States)

    Liashkevich, Siarhey

    Application of space technologies for the purpose of education at the Aerospace Educational Center of Belarusian state university is discussed. The aim of the work is to prepare launch of small satellite. Students are expected to participate in the design of control station, systems of communication, earth observation, navigation, and positioning. Benefit of such project-based learning from economical perspective is discussed. At present our training system at the base of EyasSat classroom satellite is used for management of satellite orientation and stabilization system. Principles of video processing, communication technologies and informational security for small spacecraft are developed at the base of Wi9M-2443 developer kit. More recent equipment allows obtaining the skills in digital signal processing at the base of FPGA. Development of ground station includes setup of 2.6 meter diameter dish for L-band, and spiral rotational antennas for UHF and VHF bands. Receiver equipment from National Instruments is used for digital signal processing and signal management.

  11. State of Technological Development of Crop Production by Rural Territorial Economic Systems

    Directory of Open Access Journals (Sweden)

    Usenko Lyudmila N.

    2014-01-01

    Full Text Available Low level of distribution of innovations and technological development in the Russian agriculture exerts a negative influence upon the basic branch of the economy of rural territories – crop production, which, by production factors, possesses the highest potential in the world. Moreover, Russia’s joining WTO has an effect on the strategy of the branch development and disposes to another, innovative way of formation of the competitive agrarian sector of economy. The article uses retrospective analysis of main factors of production and many-sided indicators of financial and economic activity of agriculture in order to assess the state of technological development and innovation potential of the crop industry in Russia. The article draws conclusions about influence of these factors and indicators upon formation and development of the innovative basis of the agro-industrial complex of Russia and identifies potential of its further growth. The article also focuses on interdependence of groups of indicators that form the current picture of the study. The article reveals weaknesses and negative factors that interfere with establishment of the innovative agrarian sector of Russian economy.

  12. The effects of improved maize technology on household welfare in Buruku, Benue State, Nigeria

    Directory of Open Access Journals (Sweden)

    Victoria I. Audu

    2014-12-01

    Full Text Available This study was carried out to determine the welfare effects of improved maize technology in Buruku Local Government Area of Benue State, Nigeria. The study also examined the determinants of the adoption of improved maize technology. Structured questionnaires were used in collecting the primary data for the study. A multi-stage random technique was used in selecting 125 farm households for the study. The Logit and ordinary least square (OLS models were used in analyzing the data. The OLS results show that adoption of improved maize varieties is positively and significantly related to household welfare and thus has contributed to moving farm households out of poverty. Other variables found to be statistically significant in explaining household welfare are education, household size, and landholding. The Logit results show that age, household size, off-farm income, and education were found to be significant in influencing farmers’ adoption decisions. Some robustness checks were performed with different specifications of the Logit and OLS models as well as re-estimation with propensity matching score approach. Overall, the results are robust to different specifications.

  13. Environmental impacts and benefits of state-of-the-art technologies for E-waste management.

    Science.gov (United States)

    Ikhlayel, Mahdi

    2017-10-01

    This study aims to evaluate the environmental impacts and benefits of state-of-the-art technologies for proper e-waste handling using Jordan as a case study. Life Cycle Assessment (LCA) was employed to evaluate five advanced management systems represent state-of-the-art treatment technologies, including sanitary landfilling; proper recycling of metals, materials, and precious metals (PMs); and incineration of plastic and the hazardous portion of printed circuit boards (PCBs). Six e-waste products that contribute the most to the e-waste in Jordan were included in the assessment of each scenario, which resulted in 30 total cases of e-waste management. The findings indicated that landfills for the entire components of the e-waste stream are the worst option and should be avoided. The most promising e-waste management scenario features integrated e-waste processes based on the concept of Integrated Waste Management (IWM), including recycling materials such as non-PMs and PMs, incinerating plastic and the hazardous content of PCBs using the energy recovered from incineration, and using sanitary landfills of residues. For this scenario, the best environmental performance was obtained for the treatment of mobile phones. Incineration of the portion of hazardous waste using energy recovery is an option that deserves attention. Because scenario implementation depends on more than just the environmental benefits (e.g., economic cost and technical aspects), the study proposes a systematic approach founded on the IWM concept for e-waste management scenario selection. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. The State of the Art Report on the Development and Manufacturing Technology of Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. S.; Jeong, Y. H.; Park, S. Y.; Lee, M. H.; Choi, B. K.; Baek, J. H.; Park, J. Y.; Kim, J. H.; Kim, H. G.; Kim, K. H

    2006-07-15

    The main objective of the present R and D on breeder blanket is the development of test blanket modules (TBMs) to be installed and tested in International Thermonuclear Experimental Reactor (ITER). In the program of the blanket development, a blanket module test in the ITER is scheduled from the beginning of the ITER operation, and the performance test of TBM in ITER is the most important milestone for the development of the DEMO blanket. The fabrication of TBMs has been required to test the basic performance of the DEMO blanket, i.e., tritium production/recovery, high-grade heat generation and radiation shielding. Therefore, the integration of the TBM systems into ITER has been investigated with the aim to check the safety, reliability and compatibility under nuclear fusion state. For this reason, in the Test Blanket Working Group (TBWG) as an activity of the International Energy Association (IEA), a variety of ITER TBMs have been proposed and investigated by each party: helium-cooled ceramic (WSG-1), helium-cooled LiPb (WSG-2), water-cooled ceramic (WSG-3), self-cooled lithium (WSG-4) and self-cooled molten salt (WSG-5) blanket systems. Because we are still deficient in investigation of TBM development, the need of development became pressing. In this report, for the development of TBM sub-module and mock-up, it is necessary to analyze and examine the state of the art on the development of manufacturing technology of TBM in other countries. And we will be applied as basic data to establish a manufacturing technology.

  15. An State-of-Art Report on Remote Fabrication Technology Development for EBR-II Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Song, K. C.; Lee, J. W.; Kim, S. S.; Park, J. J.; Cho, K. H.; Lee, D. Y.; Ryu, H. J.; Lee, C. B

    2008-05-15

    The Generation-IV nuclear system program, aiming to continue the sustainable development of nuclear power utilization, was internationally started from 2000. In order to develop the sodium cooled fast reactor (SFR) that is expected to be commercialized firstly among Gen-IV candidate nuclear systems, it would be essential that construction of hot-cell facility for SFR fuel fabrication will be important. SFR fuel contains minor actinide elements recycled from spent fuel and R and D program on a fabrication technology development of TRU metal fuel is currently conducted. Therefore, SFR fuel fabrication technology in hot cell will be future urgent issue. This report is an state-of art report related to remote fabrication technologies of metal fuel for the development of EBR-II fuel cycle at ANL. The focus in this report is the summary on the development of EBR-II fuel fabrication processes and its equipment, operation experience in each process which covers melt refining process of spent metal fuel, fuel pin and element fabrication processes and subassembly fabrication process, waste management. Argonne National Laboratory (ANL) (retitled to INL) designed and constructed the EBR(Experimental fast neutron Breeder Reactor)-II and were into operation using enriched uranium alloy fuel in July 1964. Over 700 irradiated reactor subassemblies were processed in the FCF (Fuel Cycle Facility) and returned to EBR-II reactor through April 1969. The comprehensive remote fabrication technology in hot cell for metallic fuel has been established according to EBR-II fuel cycle program. In FCF, the spent uranium alloy fuel from reactor was promptly recovered for reuse on site by low-decontamination, pyrometallurgical partial purification process called melt refining process. About 2.4 metric tons of irradiated fuel were processed by melt refining process. From the recovered fuel and additional new alloy, about 34,500 fully acceptable fuel elements were fabricated remotely in hot cell

  16. The state of the art on the radioactive metal waste recycling technologies

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Jin; Moon, Jei Kwon; Jung, Chong Hun; Park, Sang Yoon

    1997-09-01

    As the best strategy to manage the radioactive metal wastes which are generated during operation and decommissioning of nuclear facilities, the following recycling technologies are investigated. 1. decontamination technologies for radioactive metal waste recycling 2. decontamination waste treatment technologies. 3. residual radioactivity evaluation technologies. (author). 260 refs., 26 tabs., 31 figs

  17. Utilizing GIS to Examine the Relationship Between State Renewable Portfolio Standards and the Adoption of Renewable Energy Technologies

    Directory of Open Access Journals (Sweden)

    Chelsea Schelly

    2013-12-01

    Full Text Available In the United States, there is no comprehensive energy policy at the federal level. To address issues as diverse as climate change, energy security, and economic development, individual states have increasingly implemented Renewable Portfolio Standards (RPSs, which mandate that utility providers include a specified amount of electricity from renewable energy sources in their total energy portfolios. Some states have included incentives for individual energy technologies in their RPS, such as solar electric (also called photovoltaic or PV technology. Here, we use GIS to visualize adoption of RPSs and electricity generation from renewable energy sources in the US and examine changes in renewable electricity and solar electric generation over time with the goal of informing future policies aimed at promoting the adoption of renewable energy technologies.

  18. A review of current research in light-based technologies for treatment of podiatric infectious disease states.

    Science.gov (United States)

    Bornstein, Eric

    2009-01-01

    Recently, there has been a resurgence of interest in potential phototherapy technologies for the local treatment of bacterial and fungal infection. Currently, onychomycosis is the principle disease that is the target of these phototherapies in podiatric medicine. Some of these technologies are currently undergoing in vitro and in vivo trials approved by institutional review boards. The three light-based technologies are ultraviolet light therapy, near infrared photo-inactivation therapy, and photothermal ablative antisepsis. Each of these technologies have markedly dissimilar mechanisms of action. In this review, each technology will be discussed from the perspectives of history, photobiology, individual mechanism of action, safety, and potential clinical efficacy, with data presented from published material. This review is intended to give podiatric physicians detailed information on state-of-the-art infectious disease phototherapy.

  19. Policy based network management : state of the industry and desired functionality for the enterprise network: security policy / testing technology evaluation.

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, Christine A.; Ernest, Martha J.; Tolendino, Lawrence F.; Klaus, Edward J.; MacAlpine, Timothy L.; Rios, Michael A.; Keliiaa, Curtis M.; Taylor, Jeffrey L.

    2005-02-01

    Policy-based network management (PBNM) uses policy-driven automation to manage complex enterprise and service provider networks. Such management is strongly supported by industry standards, state of the art technologies and vendor product offerings. We present a case for the use of PBNM and related technologies for end-to-end service delivery. We provide a definition of PBNM terms, a discussion of how such management should function and the current state of the industry. We include recommendations for continued work that would allow for PBNM to be put in place over the next five years in the unclassified environment.

  20. Assessing the level of healthcare information technology adoption in the United States: a snapshot

    Directory of Open Access Journals (Sweden)

    Middleton Blackford

    2006-01-01

    Full Text Available Abstract Background Comprehensive knowledge about the level of healthcare information technology (HIT adoption in the United States remains limited. We therefore performed a baseline assessment to address this knowledge gap. Methods We segmented HIT into eight major stakeholder groups and identified major functionalities that should ideally exist for each, focusing on applications most likely to improve patient safety, quality of care and organizational efficiency. We then conducted a multi-site qualitative study in Boston and Denver by interviewing key informants from each stakeholder group. Interview transcripts were analyzed to assess the level of adoption and to document the major barriers to further adoption. Findings for Boston and Denver were then presented to an expert panel, which was then asked to estimate the national level of adoption using the modified Delphi approach. We measured adoption level in Boston and Denver was graded on Rogers' technology adoption curve by co-investigators. National estimates from our expert panel were expressed as percentages. Results Adoption of functionalities with financial benefits far exceeds adoption of those with safety and quality benefits. Despite growing interest to adopt HIT to improve safety and quality, adoption remains limited, especially in the area of ambulatory electronic health records and physician-patient communication. Organizations, particularly physicians' practices, face enormous financial challenges in adopting HIT, and concerns remain about its impact on productivity. Conclusion Adoption of HIT is limited and will likely remain slow unless significant financial resources are made available. Policy changes, such as financial incentivesto clinicians to use HIT or pay-for-performance reimbursement, may help health care providers defray upfront investment costs and initial productivity loss.

  1. Oil atlas: National Petroleum Technology Office activities across the United States

    Energy Technology Data Exchange (ETDEWEB)

    Tiedemann, H.A.

    1998-03-01

    Petroleum imports account for the largest share of the US trade deficit. Over one-third of the 1996 merchandise trade deficit is attributed to imported oil. The good news is that substantial domestic oil resources, both existing and yet-to-be-discovered, can be recovered using advanced petroleum technologies. The Energy Information Agency estimates that advanced technologies can yield 10 billion additional barrels, equal to $240 billion in import offsets. The US Department of Energy`s National Petroleum Technology Office works with industry to develop advanced petroleum technologies and to transfer successful technologies to domestic oil producers. This publication shows the locations of these important technology development efforts and lists DOE`s partners in this critical venture. The National Petroleum Technology Office has 369 active technology development projects grouped into six product lines: Advanced Diagnostics and Imaging Systems; Advanced Drilling, Completion, and Stimulation; Reservoir Life Extension and Management; Emerging Processing Technology Applications; Effective Environmental Protection; and Crosscutting Program Areas.

  2. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  3. Cutting edge technology to enhance nursing classroom instruction at Coppin State University.

    Science.gov (United States)

    Black, Crystal Day; Watties-Daniels, A Denyce

    2006-01-01

    Educational technologies have changed the paradigm of the teacher-student relationship in nursing education. Nursing students expect to use and to learn from cutting edge technology during their academic careers. Varied technology, from specified software programs (Tegrity and Blackboard) to the use of the Internet as a research medium, can enhance student learning. The authors provide an overview of current cutting edge technologies in nursing classroom instruction and its impact on future nursing practice.

  4. Joining technologies for the 1990s: welding, brazing, soldering, mechanical, explosive, solid-state, adhesive

    Energy Technology Data Exchange (ETDEWEB)

    Buckley, J.D.; Stein, B.A.

    1986-01-01

    A compilation of papers presented in a joint NASA, American Society for Metals, The George Washington University, American Welding Society, and Society of Manufacturing Engineers Conference on Welding, Bonding, and Fastening at Langley Research Center, Hampton, VA, on October 23 to 25, 1984 is given. Papers were presented on technology developed in current research programs relevant to welding, bonding, and fastening of structural materials required in fabricating structures and mechanical systems used in the aerospace, hydrospace, and automotive industries. Topics covered in the conference included equipment, hardware and materials used when welding, brazing, and soldering, mechanical fastening, explosive welding, use of unique selected joining techniques, adhesives bonding, and nondestructive evaluation. A concept of the factory of the future was presented, followed by advanced welding techniques, automated equipment for welding, welding in a cryogenic atmosphere, blind fastening, stress corrosion resistant fasteners, fastening equipment, explosive welding of different configurations and materials, solid-state bonding, electron beam welding, new adhesives, effects of cryogenics on adhesives, and new techniques and equipment for adhesive bonding. For individual titles see N86-11228 through N86-11255.

  5. PEOPLE RETRIEVAL BY MEANS OF COMPOSITE PICTURES: PROBLEM STATE-OF-THE-ART AND TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Georgy A. Kukharev

    2014-11-01

    Full Text Available We discuss the problem of people retrieval by means of composite pictures constructed according to descriptive portrait. An overview of the problem state-of-the-art is provided beginning from the basic concepts and terminology to a modern technology for composite picture creation, real-world scenarios and search results. The development history of systems for forming composite portraits (photo robots and sketches and the ideas implemented in these systems are provided. The problem of automatic comparison of composite pictures with the original ones is discussed, and the reasons for unattainability of stable retrieval of originals by a composite picture in real-world scenarios are revealed. Requirements to composite pictures databases in addition to the existing benchmark databases of facial images and also methods for implementation of such databases are formulated. Approaches for generation of sketches population from an initial one that increase effectiveness of identikit-based photo image retrieval systems are proposed. The method of similarity index increasing in the couple identikit-photograph based on computation of an average identikit from the created population is provided. It is shown that such composite pictures are more similar to original portraits and their use in the discussed search problem can lead to good results. Thus the created identikits meet the requirements of the truthful scenario as take into account the possibility of incomplete information in descriptions. Results of experiments on CUHK Face Sketch and CUHK Face Sketch FERET databases and also open access identikits and corresponding photos are discussed.

  6. Selected Application of Electron Beams in Solid State Materials and Devies Technology

    Directory of Open Access Journals (Sweden)

    S. C. Jain

    1980-04-01

    Full Text Available Experimental work on electron beam annealing of implanted or diffused semiconductor layers is reviewed. In the pulsed beam annealing technique, the top layer of the semiconductor melts and regrows epitaxially. All dopant atoms are frozen in electrically active state during this process. The point defects and clusters caused by radiation damage are completely annealed out. The bulk of the material remains unaffected as its temperature does not rise by more than a few degrees. In the CW electron beam annealing, the layer does not melt but due to sharp temperature gradient and high temperature of the layer, the growth of solid phase epitaxial layer is induced. However, a part of the dopant atoms may remain electrically inactive in this process of annealing. The pulsed beam annealing has also been used for growing high quality single crystal layers of germanium on silicon substrate. Recently, a new technology has been developed to grow silicon single crystal layers on amorphous substrates. Recent advances in the method of determination of lifetime using electron beams are also discussed.

  7. Joining technologies for the 1990s: Welding, brazing, soldering, mechanical, explosive, solid-state, adhesive

    Science.gov (United States)

    Buckley, John D. (Editor); Stein, Bland A. (Editor)

    1986-01-01

    A compilation of papers presented in a joint NASA, American Society for Metals, The George Washington University, American Welding Society, and Society of Manufacturing Engineers Conference on Welding, Bonding, and Fastening at Langley Research Center, Hampton, VA, on October 23 to 25, 1984 is given. Papers were presented on technology developed in current research programs relevant to welding, bonding, and fastening of structural materials required in fabricating structures and mechanical systems used in the aerospace, hydrospace, and automotive industries. Topics covered in the conference included equipment, hardware and materials used when welding, brazing, and soldering, mechanical fastening, explosive welding, use of unique selected joining techniques, adhesives bonding, and nondestructive evaluation. A concept of the factory of the future was presented, followed by advanced welding techniques, automated equipment for welding, welding in a cryogenic atmosphere, blind fastening, stress corrosion resistant fasteners, fastening equipment, explosive welding of different configurations and materials, solid-state bonding, electron beam welding, new adhesives, effects of cryogenics on adhesives, and new techniques and equipment for adhesive bonding.

  8. The Chinese Politics of Communication Technology: Utility, State Building and Control

    Science.gov (United States)

    Su, Dan

    2012-01-01

    This study provides an examination into the formulation and construction of information and communication technology policy in China. It traces the rise of information technology and the "informatization" drive in China's political rhetoric, and identifies the changes and trajectory of information and communication technology in China's…

  9. A Phenomenological Approach to Experiences with Technology: Current State, Promise, and Future Directions for Research

    Science.gov (United States)

    Cilesiz, Sebnem

    2011-01-01

    In this paper I conceptualize experiences with technology as an object of study for educational technology research and propose phenomenology as a highly suitable method for studying this construct. I begin by reviewing existing research focusing on the construct of experiences with technology and the approaches utilized for its study. To augment…

  10. A State-of-the-Art Report on Technologies of a Safety Assessment and a Radioactivity Exposure Assessment for the Decommissioning Process of Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwan Seong; Kang, Young Ae; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

    2007-09-15

    This report is to provide the reference contents of research and development for technologies of radioactivity exposure and safety assessment for development of the decommissioning technology for nuclear facilities. This report consists of as follows: - Analyzing and discussing on state-of-the-art technologies of a radioactivity exposure assessment of a decommissioning for nuclear facilities - Analyzing and discussing on state-of-the-art technologies of a safety assessment of a decommissioning for nuclear facilities.

  11. Thomas Edison State College and Colorado State University: Using Cutting-Edge Technology to Enhance CE Unit Success

    Science.gov (United States)

    van Zyl, Henry; Powell, Albert, Jr.

    2012-01-01

    Thomas Edison State College (TESC) and Colorado State University (CSU) offer significant contrasts in institutional culture, student demographics, faculty and institutional priorities and approaches to distance education course development and delivery. This article offers case studies showing that widely disparate program design and delivery…

  12. Persuasive technology for health and wellness: State-of-the-art and emerging trends.

    Science.gov (United States)

    Orji, Rita; Moffatt, Karyn

    2016-05-31

    The evolving field of persuasive and behavior change technology is increasingly targeted at influencing behavior in the area of health and wellness. This paper provides an empirical review of 16 years (85 papers) of literature on persuasive technology for health and wellness to: (1.) answer important questions regarding the effectiveness of persuasive technology for health and wellness, (2.) summarize and highlight trends in the technology design, research methods, motivational strategies, theories, and health behaviors targeted by research to date, (3.) uncover pitfalls of existing persuasive technological interventions for health and wellness, and (4.) suggest directions for future research. © The Author(s) 2016.

  13. Adoption of renewable energy technologies in oil-rich countries: Explaining policy variation in the Gulf Cooperation Council states

    NARCIS (Netherlands)

    Atalay, Yasemin; Biermann, Frank; Kalfagianni, Agni

    2016-01-01

    While the member states of the Gulf Cooperation Council have economically and politically been dominated by the exploitation of fossil fuels, recent years have seen an increasing adoption of renewable energy technologies, the reasons of which are not yet sufficiently understood. This paper argues th

  14. Techniques Use by Science, Technology and Mathematics (STM) Teachers for Controlling Undesirable Classroom Behaviours in Anambra State Secondary Schools

    Science.gov (United States)

    Chinelo, Okigbo Ebele; Nwanneka, Okoli Josephine

    2016-01-01

    This study investigated the techniques used by secondary school Science Technology and Mathematics (STM) teachers in controlling undesirable behaviours in their classrooms. It adopted descriptive survey design in which 178 Anambra State teachers teaching STM subjects in senior secondary were involved in the research. Two sections of questionnaire…

  15. Information and Communication Technologies (ICT) and Their Relation to Academic Results Indicators in State Public Universities in Mexico

    Science.gov (United States)

    Arcos-Vega, José L.; Ramiro Marentes, Fabiola; Algravez Uranga, Juan J.

    2017-01-01

    We present an analysis regarding Information and Communication Technologies (ICT) and their relation with indicators of academic results in bachelor's degree programs offered in state public universities in Mexico. This work is non experimental, cross-sectional, and correlational. The goal is to determine significant relations between variables:…

  16. A Stakeholder View of Organizational Adaptation to Technological Change: The Case of U. S. State Universities, 2003-2012

    Science.gov (United States)

    Gould, Robert W.

    2013-01-01

    This study addressed technological change in the core processes of teaching and learning in U. S. state universities in the decade from 2003-2012. Institutions of higher education in the U. S. have faced dramatically complex and rapidly changing operating environments. In response to these conditions, institutions of higher education have…

  17. Factors Affecting Gender Equity in the Choice of Science and Technology Careers among Secondary School Students in Edo State, Nigeria

    Science.gov (United States)

    Osagie, Roseline O.; Alutu, Azuka N.

    2016-01-01

    The study investigated the factors affecting gender equity in science and technology among senior secondary school students. The study was carried out at the University of Benin Demonstration Secondary School in Benin City, Edo State, Nigeria. One hundred and fifty students of average age 15 years in their penultimate year were administered the…

  18. Systems to support health technology assessment (HTA) in Member States of the European Union with limited institutionalization of HTA

    NARCIS (Netherlands)

    Moharra, Montse; Espallargues, Mireia; Kubesch, Nadine; Estrada, Maria-Delors; Parada, Antoni; Vondeling, Hindrik; Lo Scalzo, Alessandra; Christofides, Stelios; Turk, Eva; Raab, Martin

    2009-01-01

    Objectives: The aim of this study was to support health technology assessment (HTA) capacity building in Member States of the European Union with limited experience or without institutionalized HTA. The main output is a Handbook on HTA Capacity Building. - Methods: The methods used were worldwide

  19. Internet Technology-Based Projects in Learning and Teaching English as a Foreign Language at Yakutsk State University

    Science.gov (United States)

    Zamorshchikova, Lena; Egorova, Olga; Popova, Marina

    2011-01-01

    This paper discusses recent uses of information and communication technologies (ICTs) in fostering Internet-based projects for learning English as a Foreign Language (EFL) at the Faculty of Foreign Languages in Yakutsk State University, Russia. It covers the authors' experiences integrating distance education and creating educational resources…

  20. An overview of the state of the art technologies for multi-MW scale offshore wind turbines and beyond

    DEFF Research Database (Denmark)

    Natarajan, Anand

    2014-01-01

    systems that ensure performance and the design of offshore support structures to minimize cost of energy. Light weight carbon fiber blades, aeroelastic tailoring using bend–twist coupling are discussed in coordination with a multitude of aerodynamic technologies for optimal power capture such as high...... mechanisms such as individual blade pitch control offer promising advances. The lack of reliability of the gearbox has resulted in drive train technologies to move toward direct drives, whose benefits and liabilities are assessed in combination with generator concepts. The support structures are discussed......An overview of technological trends in the design of multi-mega Watt wind turbines focused on the offshore sector is presented. The state of the art technologies for wind turbine design are multidisciplinary ranging from blade aeroelasticity, power transmission to the generator, to advanced control...

  1. Numerical calculation of the stress-strain state of non-rigid pavements, renovated by cold recycling technology

    Directory of Open Access Journals (Sweden)

    Світлана Михайлівна Талах

    2017-01-01

    Full Text Available The problem of improving the scientific basis to determine the stress-strain state of non-rigid pavements, renovated by cold recycling technology, is considered. The results of numerical calculation of stress-strain state of non-rigid pavements in the section of road Kyv-Kovel (297 + 700 km - 302 + 400 km are given using automated calculation software complex of thin-walled spatial structures (KARTPK. The real state of the road section through 8.5 years after the renovation is analyzed

  2. Bauman Moscow State Technical University Youth Space Centre: Student's Way in Space Technologies

    Science.gov (United States)

    Mayorova, Victoria; Zelentsov, Victor

    2002-01-01

    The Youth Space Center (YSC) was established in Bauman Moscow State Technical University (BMSTU) in 1989 to provide primary aerospace education for young people, stimulate youth creative research thinking, promote space science and technology achievements and develop cooperation with other youth organizations in the international aerospace community. The center is staffed by the Dr. Victoria Mayorova, BMSTU Associate Professor, the YSC director, Dr. Boris Kovalev, BMSTU Associate Professor, the YSC scientific director, 5 student consultants and many volunteers. Informally YSC is a community of space enthusiasts, an open club for BMSTU students interested in space science and technology and faculty teaching in this field. YSC educational activities are based on the concept of uninterrupted aerospace education, developed and implemented by the center. The concept includes working with young space interested people both in school and university and then assisting them in getting interesting job in Russian Space Industry. The school level educational activities of the center has got different forms, such as lecturing, summer scientific camps and even Classes from Space given by Mir space station flight crew in Mission Control Center - Moscow and done in cooperation with All- Russian Aerospace Society Soyuz (VAKO Soyuz). This helps to stimulate the young people interest to the fundamental sciences ( physics, mathematics, computer science, etc.) exploiting and developing their interest to space and thus increase the overall educational level in the country. YSC hosts annual Cosmonautics conference for high school students that provides the University with capability to select well-prepared and motivated students for its' rocket and space related departments. For the conference participants it's a good opportunity to be enrolled to the University without entrance examinations. BMSTU students can participate in such YSC activities as annual international workshop for space

  3. Science and technology of farm animal cloning: state of the art.

    Science.gov (United States)

    Vajta, Gábor; Gjerris, Mickey

    2006-05-01

    Details of the first mammal born after nuclear transfer cloning were published by Steen Malte Willadsen in 1986. In spite of its enormous scientific significance, this discovery failed to trigger much public concern, possibly because the donor cells were derived from pre-implantation stage embryos. The major breakthrough in terms of public recognition has happened when Ian Wilmut et al. [Wilmut, I., Schnieke, A.E., McWhir, J., Kind, A.J., Campbell, K.H., 1997. Viable offspring derived from fetal és adult mammalian cells. Nature 385, 810-813] described the successful application of almost exactly the same method, but using the nuclei of somatic cells from an adult mammal, to create Dolly the sheep. It has become theoretically possible to produce an unlimited number of genetic replicates from an adult animal or a post-implantation foetus. Since 1997 a number of different species including pigs, goats, horses, cats, etc. have been cloned with the somatic cell nuclear transfer technique. Although the technology still has relatively low success rates and there seems to be substantial problems with the welfare of some of the cloned animals, cloning is used both within basic research and the biomedical sector. The next step seems to be to implement cloning in the agricultural production system and several animals have been developed in this direction. This article reviews the current state of the art of farm animal cloning from a scientific and technological perspective, describes the animal welfare problems and critically assess different applications of farm animal cloning. The scope is confined to animal biotechnologies in which the use of cell nuclear transfer is an essential part and extends to both biomedical and agricultural applications of farm animal cloning. These applications include the production of genetically identical animals for research purposes, and also the creation of genetically modified animals. In the agricultural sector, cloning can be used as a

  4. Survey of Technology with Possible Applications to United States Coast Guard Buoy Tenders. Volume 1. Technology Assessment.

    Science.gov (United States)

    1987-09-01

    performance. Zig - zag tests show SWATH ships have half the overshoot of conventional ships. At slow speeds, the widely separated propulsion units aid...Ii S2 2-13 C, Lb 0 00 2-14 ’rkpl I% -W N~ louw W ME ’ K’.MM w~~b Af’- w~t W pw -.J 1 W ’W SS U. C ’U . 2-15 Mill ll WRII9PqWWmWIK"-wPFll7TW W.F K...Evaluation of a Compound Cycle Engine for Shipboard Gensets," Report No. DTNSRDC-PASD-CR-1886. 6.19 Mills , R.G., "Innovative Technology on Steam

  5. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  6. A state of the Art report on Manufacturing technology of high burn-up fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyeong Ho; Nam, Cheol; Baek, Jong Hyuk; Choi, Byung Kwon; Park, Sang Yoon; Lee, Myung Ho; Jeong, Yong Hwan

    1999-09-01

    In order to manufacturing the prototype fuel cladding, overall manufacturing processes and technologies should be thoroughly understood on the manufacturing processes and technologies of foreign cladding tubes. Generally, the important technology related to fuel cladding tube manufacturing processes for PWRs/PHWRs is divided into three stages. The first stage is to produce the zirconium sponge from zirconium sand, the second stage is to produce the zircaloy shell or TREX from zirconium sponge ingot and finally, cladding is produced from TREX or zircaloy shell. Therefore, the manufacturing processes including the first and second stages are described in brief in this technology report in order to understand the whole fuel cladding manufacturing processes. (author)

  7. A state of the Art report on Manufacturing technology of high burn-up fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyeong Ho; Nam, Cheol; Baek, Jong Hyuk; Choi, Byung Kwon; Park, Sang Yoon; Lee, Myung Ho; Jeong, Yong Hwan

    1999-09-01

    In order to manufacturing the prototype fuel cladding, overall manufacturing processes and technologies should be thoroughly understood on the manufacturing processes and technologies of foreign cladding tubes. Generally, the important technology related to fuel cladding tube manufacturing processes for PWRs/PHWRs is divided into three stages. The first stage is to produce the zirconium sponge from zirconium sand, the second stage is to produce the zircaloy shell or TREX from zirconium sponge ingot and finally, cladding is produced from TREX or zircaloy shell. Therefore, the manufacturing processes including the first and second stages are described in brief in this technology report in order to understand the whole fuel cladding manufacturing processes. (author)

  8. A Review of Wireless Sensor Technologies and Applications in Agriculture and Food Industry: State of the Art and Current Trends

    Directory of Open Access Journals (Sweden)

    Ignacio Robla

    2009-06-01

    Full Text Available The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri-Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks and RFID (Radio Frequency Identification, presenting the different systems available, recent developments and examples of applications, including ZigBee based WSN and passive, semi-passive and active RFID. Future trends of wireless communications in agriculture and food industry are also discussed.

  9. Internet Technology-Based Projects in Learning and Teaching English as a Foreign Language at Yakutsk State University

    Directory of Open Access Journals (Sweden)

    Lena Zamorshchikova

    2011-05-01

    Full Text Available This paper discusses recent uses of information and communication technologies (ICTs in fostering Internet-based projects for learning English as a Foreign Language (EFL at the Faculty of Foreign Languages in Yakutsk State University, Russia. It covers the authors’ experiences integrating distance education and creating educational resources within the Moodle LMS and wiki projects based on Web 2.0 social networking technologies. Also it discusses our international project, Net-based Course Development: English through Digital Storyline, in cooperation with the University of Tromsø, Norway.

  10. The Content of Educational Technology Curricula: A Cross-Curricular State of the Art

    Science.gov (United States)

    Aesaert, Koen; Vanderlinde, Ruben; Tondeur, Jo; van Braak, Johan

    2013-01-01

    The purpose of this study is to analyze the content features of educational technology curricula for primary education developed by national governments. A qualitative cross-case document analysis of the national educational technology curriculum of Norway, Flanders and England was conducted. The analysis focuses on the underlying visions,…

  11. Current state of information technology use in a US primary care practice-based research network

    Directory of Open Access Journals (Sweden)

    James Andrews

    2004-02-01

    Conclusion While interest in enabling information technologies was high in KAN, adoption was variable, with use of several key technologies reported as low.The results suggest that research in this network that would be dependent on or enhanced by IT might be impeded and, generally, greater attention should be given to enhancing the IT infrastructure in primary care.

  12. State of the art of using virtual reality technologies in built environment education

    NARCIS (Netherlands)

    Keenaghan, G.; Horvath, I.

    2014-01-01

    This paper reports on our major findings concerning the application of virtual reality technologies in built environment education (BEE). In addition to an analysis of the current trends and developments in current virtual reality technologies and systems, it also evaluates their educational usabili

  13. Juvenile technologies as a system of organisation of social partnership of the state and society

    Directory of Open Access Journals (Sweden)

    Portnyagina E.V.

    2016-01-01

    Full Text Available The article presents the analysis of different approaches to the definition of "juvenile technologies", presented both in scientific publications and in the activities of institutions engaged in the work with minors, including those who have found themselves in difficult situations and/or in conflict with the law. The analysis of the organization of interdepartmental cooperation between governmental bodies of Omsk Region and social institutions, as well as educational organizations on the implementation of juvenile technologies in Omsk region has been conducted. The study allowed posing the problem of inconsistencies in the understanding of juvenile technologies, which does not allow establishing an effective juvenile system. The authors propose an alternative vision of the concepts. It is proposed to increase the efficiency of the use of juvenile technologies at the expense of the organization of continuous monitoring of the implementation of juvenile technologies in the region, where pedagogical, psychological, legal, financial valuation criteria would be presented.

  14. UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2008

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S.

    2009-11-05

    The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

  15. Comparison of Technological Options for Distributed Generation-Combined Heat and Power in Rajasthan State of India

    Directory of Open Access Journals (Sweden)

    Ram Kumar Agrawal

    2013-01-01

    Full Text Available Distributed generation (DG of electricity is expected to become more important in the future electricity generation system. This paper reviews the different technological options available for DG. DG offers a number of potential benefits. The ability to use the waste heat from fuel-operated DG, known as combined heat and power (CHP, offers both reduced costs and significant reductions of CO2 emissions. The overall efficiency of DG-CHP system can approach 90 percent, a significant improvement over the 30 to 35 percent electric grid efficiency and 50 to 90 percent industrial boiler efficiency when separate production is used. The costs of generation of electricity from six key DG-CHP technologies; gas engines, diesel engines, biodiesel CI engines, microturbines, gas turbines, and fuel cells, are calculated. The cost of generation is dependent on the load factor and the discount rate. It is found that annualized life cycle cost (ALCC of the DG-CHP technologies is approximately half that of the DG technologies without CHP. Considering the ALCC of different DG-CHP technologies, the gas I.C. engine CHP is the most effective for most of the cases but biodiesel CI engine CHP seems to be a promising DG-CHP technology in near future for Rajasthan state due to renewable nature of the fuel.

  16. A preliminary assessment of the state of harvest and collection technology for forest residues

    Energy Technology Data Exchange (ETDEWEB)

    Webb, Erin [ORNL; Perlack, Robert D [ORNL; Blackwelder, D. Brad [Idaho National Laboratory (INL); Muth, David J. [Idaho National Laboratory (INL); Hess, J. Richard [Idaho National Laboratory (INL)

    2008-08-01

    To meet the 'Twenty in Ten Initiative' goals set in the 2007 State of the Union address, forest resources will be needed as feedstocks for lignocellulosic ethanol production. It has been estimated that 368 million dry tons can be produced annually in the U.S. from logging residues and fuel treatment thinnings. Currently, very little of this woody biomass is used for energy production due to the costs and difficulty in collecting and transporting this material. However, minimizing biomass costs (including harvest, handling, transport, storage, and processing costs) delivered to the refinery is necessary to develop a sustainable cellulosic ethanol industry. Achieving this goal requires a fresh look at conventional timber harvesting operations to identify ways of efficiently integrating energy wood collection and developing cost-effective technologies to harvest small-diameter trees. In conventional whole-tree logging operations, entire trees are felled and skidded from the stump to the landing. The residues (also called slash), consisting of tops and limbs, accumulate at the landing when trees are delimbed. This slash can be ground at the landing with a mobile grinder or transported to another central location with a stationary grinder. The ground material is transported via chip vans, or possibly large roll on/off containers, to the user facility. Cut-to-length harvesting systems are gaining popularity in some locations. In these operations, specialized harvesters that can fall, delimb, and cut logs to length are used. The small diameter tops and limbs accumulate along the machine's track. It can be left in the forest to dry or removed soon after harvest while logs are extracted. Removing slash during the same operation as the wood has been shown to be more efficient. However, leaving residue in the forest to dry reduces moisture content, which improves grinder performance, reduces dry matter loss during storage, and inhibits colonization of fungi

  17. Implications of Technology for Teaching and Learning. Annual Professional Education Seminar of Central States Colleges and Universities (3rd, November, 1967).

    Science.gov (United States)

    Woodruff, Asahel; Froyen, Len

    This report of the proceedings of the 3rd Annual Professional Education Seminar of the Central States Colleges and Universities centers upon the implications of technology for teaching and learning and contains addresses delivered, including "Some Concerns Related to Technology in Education," by Len Froyen; and "Implications of Technology for…

  18. Development of technology for coal thermal power generation. Present state and future forecast

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimura, Uichiro

    1987-01-01

    Summary of the 1987 coal technology development projects supported by the Agency of Natural Resources and Energy, and the related data such as positioning of coal thermal power plants, application technoloy system, etc. are presented. The coal power generation technology system projects scheduled for 1980 - 1990 were introduced. For the environmental protection, air polution constitutes a big problem, and technologies of desulfurization, denitration, etc. have been developed. In the field of application technology, liquefaction of coal, utilization of low-grade coals, coal gasification, application to combined cycle power generation, etc. can be quoted. The agency is supporting development of various application technologies as the 1987 projects, among them are: Development of entrained bed coal gasification power plant, Verification experiments of technologies for dry desulfurization for coal thermal power plant, Verification tests for operational improvement of coal thermal power plant, Study on the possibility of introducing large scale fluidized bed boiler to coal thermal power generation, Investigation of new power generation systems, Development of high performance coal thermal power technology, and Development of optimum control system for large scale fluidized bed boiler. (2 tabs, 4 photos)

  19. USE OF SPACE TECHNOLOGY IN FEDERALLY FUNDED LAND PROCESSES RESEARCH IN THE UNITED STATES.

    Science.gov (United States)

    Thorley, G.A.; McArdle, R.

    1986-01-01

    A review of the use of space technology in federally funded earth science research in the US was carried out in 1985 by the President's Office of Science and Technology Policy. Five departments and three independent agencies, representing the primary earth science research agencies in the Federal government, participated in the review. The review by the subcommittee indicated that, while there is considerable overlap in the legislated missions of the earth science agencies, most of the space-related land processes research is complementary. Summaries are provided of the current and projected uses of space technology in land processes activities within the eight Federal organizations.

  20. COAL DRY BENEFICIATION TECHNOLOGY IN CHINA: THE STATE-OF-THE-ART

    Institute of Scientific and Technical Information of China (English)

    Qingru Chen; Lubin Wei

    2003-01-01

    In China, coal is the major source of energy and its leading role in energy consumption would not change in the next 50 years. Coal preparation is the essential component of Clean Coal Technology. In China more than two-thirds of available coal reserves are in arid areas, which results in the unfeasibility with conventional wet processing for coal preparation. The uniqueness of dry coal beneficiation technology with air-dense medium fluidized bed is discussed in this paper and a detailed survey of the current status of theoretical study, commercial application and development of the new technology is given in this paper.

  1. Technology Reconciliation in the Remote Sensing ERA of United States Civilian Weather Forecasting: 1957 -1987.

    Science.gov (United States)

    Courain, Margaret Eileen

    This dissertation seeks to advance an understanding of the management of a major technological change in meteorology. The study examines the connection between changes in production and real-time use of data products derived from remote -sensing data collection and the evolution of U.S. civilian weather forecasting 1957-1987. The role of data collection in weather forecasting throughout history is examined, giving most attention to the 1957-1987 period. Critical to the real-time use of remote-sensing data was technology reconciliation. As defined by the author, it is the function or process by which data products and information derived from a new technology are made consistent or congruent with the existing data representations of a science in order to be used effectively. No model had been developed for a technology reconciliation process, or definition of the major role technology reconciliators played in the 30-year evolution of the science of weather forecasting. In order to assess the new remote-sensing data resource and its use in U.S. civilian weather forecasting, a Data Accountability and Review Technique (DART) was developed by the author in 1989. This technique was used to identify 16 of the technology reconciliators who developed and reconciled 25 new remote-sensing data products with the weather charts, maps and computer models of the National Weather Service. In five separate program teams, they were responsible for 15 improvements in the products--forecasts--and 18 improvement in the process of weather forecasting. A model of the technology reconciliation is proposed which can be applied to understanding the contemporary history of other sciences. The model, as well as the methods developed by the author to recognize the process of technology reconciliation has a much more general applicability beyond the sciences. Any field implementing new technology that promises to improve its whole way of working will be faced with the task of technology

  2. Knowledge management aiming to technology transfer: the challenges face by the tic of the state university of Santa Cruz

    Directory of Open Access Journals (Sweden)

    Luan Carlos Santos Silva

    2013-05-01

    Full Text Available The present article discusses the concept of organizational knowledge, and theory models for the creation and management of organizational knowledge that, in many approaches, do not take into account the specificity of each organization and the relationship. The paper analyses the innovation dynamics and the technology transfer from Technological Innovation Centers (TIC to the productive sector. The methodology employed was qualitative and of descriptive nature. The method used in the research was a case study in a TIC well-structured in respect to the constitution of the TICs from the perspective of the Federal Innovation Law nº 10.973 of the Innovation Law of the Bahia State nº 11.174. Barriers for knowledge creation and management that guarantee the effective technology transfer were identified.

  3. Critical Technologies Plan for the Committees on Armed Services, United States Congress. Revision

    Science.gov (United States)

    1989-05-05

    denitrifying biotech propellants & explosives aliphatic nitro- products compounds BIOMATERIALS " Fibers Cloned synthesis fibers - Solid state synthesis - High... solid state synthesis " Elastomers • Producers identified * Production optimization * Gaskets, coatings ° Polymer characterization * Material...optimization " Cloned synthesis - Solid state synthesis • Adhesives * Cloned variants - Cloned synthesis * General use adhesive Product variants -Variants

  4. The Impact of Population Ageing on Technological Progress and TFP Growth, with Application to United States: 1950-2050

    OpenAIRE

    Izmirlioglu, Yusuf

    2008-01-01

    I examine the effect of age-distribution of the society on economic growth through technological progress. I build a multisector economy model that involves population pyramid. I characterize the steady-state of the model for low and high population growth rate. Higher population growth rate yields faster TFP and output growth in the long-run. I analyze dynamic behavior of the economy. I calibrate the model for United States, 1950-2000 and using the estimated parameters I make predictions abo...

  5. Internet and technology transfer in acute care hospitals in the United States: survey-2000.

    Science.gov (United States)

    Hatcher, M

    2001-12-01

    This paper provides the results of the survey-2000 measuring technology transfer and, specifically, Internet usage. The purpose of the survey was to measure the levels of Internet and Intranet existence and usage in acute care hospitals. The depth of the survey includes e-commerce for both business-to-business and customers. These results are compared with responses to the same questions in survey-1997. Changes in response are noted and discussed. This information will provide benchmarks for hospitals to plan their network technology position and to set goals. This is the third of three articles based upon the results of the survey-2000. Readers are referred to prior articles by the author, which discuss the survey design and provide a tutorial on technology transfer in acute care hospitals. (1) Thefirst article based upon the survey results discusses technology transfer, system design approaches, user involvement, and decision-making purposes. (2)

  6. The flexible developmental state: globalization, information technology and the "Celtic Tiger"

    OpenAIRE

    O Riain, Prof. Sean

    2000-01-01

    In the late 20th century Ireland underwent a dramatic economic transformation based on the growing strength of its information technology indutries. This article discusses Ireland's development strategies, in particular focussing on the Irish software industry.

  7. High Speed and Rapid State Switching ESI- TOF- MS Technology and Its Applications

    Institute of Scientific and Technical Information of China (English)

    Shi- da Shen; Bruce Andrien; Craig Whitehouse; Staffan Renlund; Henrik Wadensten; Jun-lin Mao

    2001-01-01

    @@ Due to new emerging fast separation technology and the great demand of high sample throughput in discovery, large number of samples now needed to be analyzed by mass spectrometer with high conformation accuracy.

  8. The improvement of all-solid-state electrochromic devices fabricated with the reactive sputter and cathodic arc technology

    Directory of Open Access Journals (Sweden)

    Min-Chuan Wang

    2016-11-01

    Full Text Available The all-solid-state electrochromic device (ECD with the one substrate structure fabricated by the reactive dc magnetron sputtering (DCMS and cathodic vacuum arc plasma (CVAP technology has been developed for smart electrochromic (EC glass application. The EC layer and ion conductor layer were deposited by reactive DCMS and CVAP technology, respectively. The ion conductor layer Ta2O5 deposited by the CVAP technology has provided the better porous material structure for ion transportation and showed 1.76 times ion conductivity than devices with all sputtering process. At the same time, the EC layer WO3 and NiO deposited by the reactive DCMS have also provided the high quality and uniform characteristic to overcome the surface roughness effect of the CVAP ion conductor layer in multilayer device structure. The all-solid-state ECD with the CVAP ion conductor layer has demonstrated a maximum transmittance variation (ΔT of 55% at 550nm and a faster-switching speed. Furthermore, the lower equipment cost and higher deposition rate could be achieved by the application of CVAP technology.

  9. The improvement of all-solid-state electrochromic devices fabricated with the reactive sputter and cathodic arc technology

    Science.gov (United States)

    Wang, Min-Chuan; Chen, Yung-Chih; Hsieh, Ming-Hao; Li, Yu-Chen; Wang, Jen-Yuan; Wu, Jin-Yu; Tsai, Wen-Fa; Jan, Der-Jun

    2016-11-01

    The all-solid-state electrochromic device (ECD) with the one substrate structure fabricated by the reactive dc magnetron sputtering (DCMS) and cathodic vacuum arc plasma (CVAP) technology has been developed for smart electrochromic (EC) glass application. The EC layer and ion conductor layer were deposited by reactive DCMS and CVAP technology, respectively. The ion conductor layer Ta2O5 deposited by the CVAP technology has provided the better porous material structure for ion transportation and showed 1.76 times ion conductivity than devices with all sputtering process. At the same time, the EC layer WO3 and NiO deposited by the reactive DCMS have also provided the high quality and uniform characteristic to overcome the surface roughness effect of the CVAP ion conductor layer in multilayer device structure. The all-solid-state ECD with the CVAP ion conductor layer has demonstrated a maximum transmittance variation (Δ T ) of 55% at 550nm and a faster-switching speed. Furthermore, the lower equipment cost and higher deposition rate could be achieved by the application of CVAP technology.

  10. The Construct of State-Level Suspicion A Model and Research Agenda for Automated and Information Technology (IT) Contexts

    Science.gov (United States)

    2013-08-01

    develop a heuristic model of state-level suspicion in technologically enhanced environments. A framework of relevant factors, research propositions...Suspicion In the application of trust to IT, Gefen, Benbasat, and Pavlou (2008) have noted a need for a conceptual framework to guide research...moderators such as gender and culture). Indeed, one of the primary dimensions of globally-based culture is labeled “uncertainty avoidance” ( Hofstede & Bond

  11. Technological innovation and its effect on public health in the United States

    Directory of Open Access Journals (Sweden)

    Gill PS

    2013-01-01

    Full Text Available Preetinder Singh GillCollege of Technology, Eastern Michigan University, Ypsilanti, MI, USABackground: Good public health ensures an efficient work force. Organizations can ensure a prominent position on the global stage by staying on the leading edge of technological development. Public health and technological innovation are vital elements of prosperous economies. It is important to understand how these elements affect each other. This research study explored and described the relationship between these two critical elements/constructs.Methods: Indicators representing technological innovation and public health were identified. Indicator data from 2000 to 2009 were collected from various US federal government sources, for the four US Census regions. The four US Census regions were then compared in terms of these indicators. Canonical correlation equations were formulated to identify combinations of the indicators that are strongly related to each other. Additionally, the cause–effect relationship between public health and technological innovation was described using the structural equation modeling technique.Results: The four US Census regions ranked differently in terms of both type of indicators in a statistically significant manner. The canonical correlation analysis showed that the first set of canonical variables had a fairly strong relationship, with a magnitude > 0.65 at the 95% confidence interval, for all census regions. Structural equation modeling analysis provided β < −0.69 and Student’s t statistic > 12.98, for all census regions. The threshold Student’s t statistic was 1.98. Hence, it was found that the β values were significant at the 95% confidence interval, for all census regions.Discussion: The results of the study showed that better technological innovation indicator scores were associated with better public health indicator scores. Furthermore, the study provided preliminary evidence that technological innovation

  12. Technology Strategy and Industrial Relations: Case Studies of Japanese Multinationals in the United States

    OpenAIRE

    1983-01-01

    Eight case studies of U.S. manufacturing subsidiaries of Japanese multinationals are analyzed in terms of variations in competitive strategies and industrial relations practices. Based on data collected in 1980 on-site visits, each firm is reviewed in light of the technology contributions coming from the Japanese parent and is categorized as having product-, process-, and/or management-centered technology strategies. The industrial relations practices are also grouped according to similaritie...

  13. Energy and technology review, January--February 1995. State of the laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Bookless, W.A.; Stull, S.; Cassady, C.; Kaiper, G.; Ledbetter, G.; McElroy, L.; Parker, A. [eds.

    1995-02-01

    This issue of Energy and Technology Review highlights the Laboratory`s 1994 accomplishments in their mission areas and core programs--economic competitiveness, national security, lasers, energy, the environment, biology and biotechnology, engineering, physics and space science, chemistry and materials science, computations, and science and math education. LLNL is a major national resource of science and technology expertise, and they are committed to applying this expertise to meet vital national needs.

  14. Zero emissions trucks. An overview of state-of-the-art technologies and their potential

    Energy Technology Data Exchange (ETDEWEB)

    Den Boer, E.; Aarnink, S. [CE Delft, Delft (Netherlands); Kleiner, F.; Pagenkopf, J. [German Aerospace Center DLR, Cologne (Germany)

    2013-07-15

    The study by CE Delft and the German Aerospace Center (DLR), commissioned by the International Council on Clean Transportation (ICCT), surveys the technology potential for zero-emission road freight transport in the EU. For short distance transport, battery electric technology is feasible, as distribution trucks have lower range requirements and recharging can occur at scheduled downtimes (e.g. overnight). For long haul applications, battery electric vehicles coupled with overhead wires (catenary) or in-road charging (dynamic) infrastructure are possible, as well as fuel cell drivelines. The cost differential between conventional and zero emission HDVs will diminish over the next 10-15 years, as fuel savings offset other costs. If zero-emission technologies are introduced on a large scale in the onroad freight transport sector beginning in 2020, the total end-user costs will not significantly increase. The total cost of ownership within this study do not consider required infrastructure investments. All zero emission technologies require major infrastructure investments, whether hydrogen refuelling stations, in-road inductive charging, or other systems. Broad policy support is needed to encourage the development and evaluation of various technology options. Over time, the policy focus must shift from stimulating innovation and technology adoption to regulation, if it is to spur a successful transformation of the truck market.

  15. Current State of Development of Electricity-Generating Technologies: A Literature Review

    Directory of Open Access Journals (Sweden)

    Manfred Lenzen

    2010-03-01

    Full Text Available Electricity is perhaps the most versatile energy carrier in modern economies, and it is therefore fundamentally linked to human and economic development. Electricity growth has outpaced that of any other fuel, leading to ever-increasing shares in the overall mix. This trend is expected to continue throughout the following decades, as large—especially rural—segments of the world population in developing countries start to climb the “energy ladder” and become connected to power grids. Electricity therefore deserves particular attention with regard to its contribution to global greenhouse gas emissions, which is reflected in the ongoing development of low-carbon technologies for power generation. The focus of this updated review of electricity-generating technologies is twofold: (a to provide more technical information than is usually found in global assessments on critical technical aspects, such as variability of wind power, and (b to capture the most recent findings from the international literature. This report covers eight technologies. Seven of these are generating technologies: hydro-, nuclear, wind, photovoltaic, concentrating solar, geothermal and biomass power. The remaining technology is carbon capture and storage. This selection is fairly representative for technologies that are important in terms of their potential capacity to contribute to a low-carbon world economy.

  16. Analysis of adoption of improved rice production technologies in Jeer local government area of Borno state, Nigeria

    Directory of Open Access Journals (Sweden)

    Mustapha, S.B.

    2013-12-01

    Full Text Available The study analysed adoption of improved rice production technologies in Jere Local Government Area of Borno State, Nigeria. Descriptive statistics such as frequencies and percentages were used to analyse the data. The study revealed that 98.12% of the respondents were male, 57.5% were within 41-50 years and most (33.12% of the respondents had adult education. The study revealed that majority (56.25% of the respondents was aware of the rice production technologies in the study area. Majority of the respondents tried rice production technologies with respect to high yielding varieties (77.50%, early maturing varieties (69.37%, use of weedicides (93.75%, broadcasting method (55.00%, manual harvesting (75.00% and bagging (63.75%. The study revealed that unavailability of fertilizer was the major (96.25% constraint affecting the adoption of rice production technologies by respondents. The study recommends that extension services should be strengthened with necessary inputs for improved adoption of rice production technologies by respondents.

  17. User-Computer Interface Technology: An Assessment of the Current State of the Art

    Science.gov (United States)

    1988-06-01

    a model of the current state of the world. A similar effort is underway at the Computing Research Laboratory at New Mexico S-’ State University. One...process by validating or modifying requirements. Rapid prototyping techniques * such as storyboarding offer relatively low cost approaches to bringing the...Research Laboratory, New Mexico State University. Bannon, Liam J. (1986). Issues in design: some notes. In D. A. Norman and S. W. Draper (Eds.), User

  18. State of the art and review on the treatment technologies of water reverse osmosis concentrates.

    Science.gov (United States)

    Pérez-González, A; Urtiaga, A M; Ibáñez, R; Ortiz, I

    2012-02-01

    The growing demand for fresh water is partially satisfied by desalination plants that increasingly use membrane technologies and among them reverse osmosis to produce purified water. Operating with water recoveries from 35% to 85% RO plants generate huge volumes of concentrates containing all the retained compounds that are commonly discharged to water bodies and constitute a potentially serious threat to marine ecosystems; therefore there is an urgent need for environmentally friendly management options of RO brines. This paper gives an overview on the potential treatments to overcome the environmental problems associated to the direct discharge of RO concentrates. The treatment options have been classified according to the source of RO concentrates and the maturity of the technologies. For the sake of clarity three different sources of RO concentrates are differentiated i) desalination plants, ii) tertiary processes in WWTP, and iii) mining industries. Starting with traditional treatments such as evaporation and crystallization other technologies that have emerged in last years to reduce the volume of the concentrate before disposal and with the objective of achieving zero liquid discharge and recovery of valuable compounds from these effluents are also reviewed. Most of these emerging technologies have been developed at laboratory or pilot plant scale (see Table 1). With regard to RO concentrates from WWTP, the manuscript addresses recent studies that are mainly focused on reducing the organic pollutant load through the application of innovative advanced oxidation technologies. Finally, works that report the treatment of RO concentrates from industrial sources are analyzed as well.

  19. Current state-of-the-art and future perspectives of robotic technology in neurosurgery.

    Science.gov (United States)

    Mattei, Tobias A; Rodriguez, Abraham Hafiz; Sambhara, Deepak; Mendel, Ehud

    2014-07-01

    Neurosurgery is one of the most demanding surgical specialties in terms of precision requirements and surgical field limitations. Recent advancements in robotic technology have generated the possibility of incorporating advanced technological tools to the neurosurgical operating room. Although previous studies have addressed the specific details of new robotic systems, there is very little literature on the strengths and drawbacks of past attempts, currently available platforms and prototypes in development. In this review, the authors present a critical historical analysis of the development of robotic technology in neurosurgery as well as a comprehensive summary of the currently available systems that can be expected to be incorporated to the neurosurgical armamentarium in the near future. Finally, the authors present a critical analysis of the main technical challenges in robotic technology development at the present time (such as the design of improved systems for haptic feedback and the necessity of incorporating intraoperative imaging data) as well as the benefits which robotic technology is expected to bring to specific neurosurgical subspecialties in the near future.

  20. Distribution of male infertility specialists in relation to the male population and assisted reproductive technology centers in the United States.

    Science.gov (United States)

    Nangia, Ajay K; Likosky, Donald S; Wang, Dongmei

    2010-07-01

    To describe the spatial distribution of assisted reproductive technology (ART) centers and male infertility specialists by location, driving distance from ART center, and potential male population in need of these resources. Cross-sectional study. Male population in the reproductive years (20-49 years old) based on U.S. Census Bureau data in 2000. Urology male infertility specialists as defined by 2005 specialty society membership directories. ART centers registered with the Society for Assisted Reproductive Technology in 2005. Male population and male infertility specialists within the service area served by in-state and neighboring-state ART centers, as defined by a 60-minute travel time. One hundred ninety-seven male infertility specialists and 390 ART centers were identified. On a state level, the highest male population in the reproductive years was seen in California, Texas, and Florida. The highest male populations per male specialist were found in Oregon, Tennessee, and Oklahoma. The highest number of ART centers per male specialist was found in Tennessee. The highest proximities of male specialists within the 60-minute driving service area of different ART centers were found in the North East and Southern California. The Midwest to Northwest had the least. A disparity of urology male infertility specialists exists in the United States, with large areas of the country being underserved and overserved based on the location of ART centers. Copyright 2010 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  1. Use of Technology for HIV Prevention Among Adolescent and Adult Women in the United States.

    Science.gov (United States)

    Blackstock, Oni J; Patel, Viraj V; Cunningham, Chinazo O

    2015-12-01

    Although the proportion of new HIV infections in the USA among women has decreased over the last few years, still, approximately 20 % of new infections occur annually among adolescent and adult women. The development of effective evidence-based prevention interventions remains an important approach to further decreasing these numbers. Technology-delivered prevention interventions hold tremendous potential due, in part, to their ability to reach beyond the walls of brick-and-mortar intervention sites to engage individuals where they are. While most technology-delivered interventions have focused on adolescents and men who have sex with men, much fewer have specifically targeted adolescent or adult women despite evidence showing that interventions tailored to specific target populations are most effective. We summarize the recently published literature on technology-delivered HIV prevention interventions for US adolescent and adult women and provide suggestions for next steps in this nascent but emergent area of prevention research.

  2. Review, Analyses and Recommendations Related to Modern International Use of Nuclear Space Technologies with Focus on United States and Russia

    Science.gov (United States)

    Smith, T.

    The current Administration under President Barack Obama has given NASA a new directive in manned spaceflight. Instead of building a fleet of Ares rockets with various load specifications to deliver astronauts to the International Space Station (ISS) and return them to the Moon, the 2011 NASA Strategic Plan [1] states that NASA will develop ``integrated architecture and capabilities for safe crewed and cargo missions beyond Low Earth Orbit.'' The technologies developed within this architecture will take astronauts beyond the Moon, to destinations such as Mars or asteroids and will most likely require the use of Nuclear Space Technologies (NSTs).While there are other proposals for novel power generation and propulsion, such as fusion technology, these technologies are immature and it may be decades before they have demonstrated feasibility; in contrast NSTs are readily available, proven to work in space, and flight qualified. However, NSTs such as nuclear thermal propulsion (NTP) may or may not reach completion - especially with the lack of a mission in which they may be developed. Prospects and progress in current NST projects, ranging from power sources to propulsion units, are explored within this study, mainly in the United States, with an overview of projects occurring in other countries. At the end of the study, recommendations are made in order to address budget and political realities, aerospace export control and nuclear non-proliferation programs, and international issues and potentials as related to NSTs. While this report is not fully comprehensive, the selection of chosen projects illustrates a range of issues for NSTs. Secondly, the reader would be keen to make a distinction between technologies that have flown in the past, projects that have been tested and developed yet not flown, and concepts that have not yet reached the bench for testing.

  3. FACTORS INFLUENCING PERFORMANCE IN BASIC TECHNOLOGY AMONG SECONDARY SCHOOL STUDENTS Of DELTA SOUTH SENATORIAL DISTRICT IN DELTA STATE, NIGERIA

    Directory of Open Access Journals (Sweden)

    Serumu Igberadja

    2015-12-01

    Full Text Available Similar to other science subjects, basic technology recorded poor secondary school students’ performance both in national and international examination. Furthermore, there are large variations in performances of Nigerian students that raise concerns. These differences in performance may be caused by multiple factors that need to be identified. The aim of this study is to identify the factors that influence students’ performance in basic technology. Four research questions guided the study and four hypotheses were tested at the .05 level of significance. The study used the survey research design method with 218 principals of secondary schools in Delta South Senatorial District in Delta State of Nigeria as the target population. The stratified random sampling technique was used to select 65 principals (32 from public and 33 from private secondary schools as sample of the study. The instrument for data collection was a questionnaire which was content and face validated by three lecturers. The test-retest method was used to ascertain the reliability based on 20 principals who were not part of the population under study. The estimated reliability r= 0.73. Data was collected personally by the researcher and was analysed using ANOVA (Analysis of variance. The result revealed that multiple factors; schools’, students’, government, and parents’ factors influenced students’ performance in basic technology with lack of resources underlying these factors.  Hence, it was recommended among others that Delta State Ministry of Basic Education should adequately provide the required resources for the teaching and learning of basic technology in secondary schools in Delta State.

  4. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    Volume IV of the ISTUM documentation gives information on the individual technology specifications, but relates closely with Chapter II of Volume I. The emphasis in that chapter is on providing an overview of where each technology fits into the general-model logic. Volume IV presents the actual cost structure and specification of every technology modeled in ISTUM. The first chapter presents a general overview of the ISTUM technology data base. It includes an explanation of the data base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters are devoted to documenting the specific-technology cost specifications. Technologies included are: conventional technologies (boiler and non-boiler conventional technologies); fossil-energy technologies (atmospheric fluidized bed combustion, low Btu coal and medium Btu coal gasification); cogeneration (steam, machine drive, and electrolytic service sectors); and solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies), and conservation technologies.

  5. A strategy for nontimber forest products research and technology transfer for southern United States

    Science.gov (United States)

    James L. Chamberlain

    2003-01-01

    In mid-2001, the Southern Research Station (SRS) and the Southern Regional Office (R8) of the U.S. Forest Service worked through a 3-day facilitated discussion to develop a strategy to guide research and technology transfer on non-timber forest products (NTFPs). In all, more than 14 specialists took part in developing the strategy, representing the Forest Service...

  6. CA-storage : technology, application and research. State of the art in the Netherlands

    NARCIS (Netherlands)

    Schaik, van A.C.R.; Verschoor, J.A.

    2003-01-01

    CA-technology in the Netherlands is used mostly for storage of apples and pears; main varieties for apples are Elstar and Jonagold. The main pear variety Conference is stored in CA after a specific delay time to prevent the pears from getting internal defects. For a wide range of produce (e.g. flowe

  7. Between Technological Endorsement and Resistance: The State of Online Writing Centers

    Science.gov (United States)

    Neaderhiser, Stephen; Wolfe, Joanna

    2009-01-01

    Over the past two decades, writing centers have steadily been expanding services and materials they offer online. The way students write and communicate about their writing continues to change, and the writing center has increasingly been looked upon as a site through which technology and writing have the ability to converge in the form of…

  8. United States Offshoring of Information Technology: An Empirical Investigation of Factors Inhibiting Sub-Saharan Africa

    Science.gov (United States)

    Omoregie, Harry O.

    2012-01-01

    In the last decade, the global information technology offshoring (ITO) and business process outsourcing (BPO) services have grown significantly, especially in Asia. The increased demand for offshore services in Asia has presented a difficult problem for U.S. organizations because countries such as India are now experiencing saturation of labor…

  9. An Implementation Study of the Science and Technology Entry Program (STEP) in New York State

    Science.gov (United States)

    Perkins, Susan C.

    2013-01-01

    As global demands for workers in the science, technology, engineering and math (STEM) fields persist, there are increased opportunities for historically underrepresented African-American and Latino youth to fill STEM career pipelines. African-American and Latino youth have long faced disproportionately high unemployment rates. Joblessness has been…

  10. Evaluation of state of the art technologies, GLOBEMEN Deliverable D411

    DEFF Research Database (Denmark)

    van den Berg, Roel; Hannus, Matti; Pedersen, Jens Dahl

    2000-01-01

    The report gives an overview of the current practice of inter-enterprise business processes and information and communication technology (ICT) support at a functional and technical level. ICT is seen as the enabler for current and future virtual enterprise concepts and functionality. It includes ...

  11. The State of Public Opinion Research on Attitudes and Understanding of Science and Technology

    Science.gov (United States)

    Besley, John C.

    2013-01-01

    This article provides a critical and global overview of current research into public opinion about science and technology (S&T). Although several sets of high-quality data exist, there remains a lack of international coordination and irregular release of new data in forms that can be widely used. The article highlights a range of key…

  12. 2-in-1 shampoo technology: state-of-the-art shampoo and conditioner in one.

    Science.gov (United States)

    Rushton, H; Gummer, C L; Flasch, H

    1994-01-01

    Consumers have expressed a need for cleaning and conditioning in one step. Conventional shampoo technology using anionic surfactants and cationic conditioners results in charge interaction and complexing of the ingredients. Neither shampoo nor conditioners achieves the desired result. The successful solution was to incorporate charge neutral dimethicone conditioning ingredients, suspended as microfine droplets within complex crystal lattices, into anionic surfactant shampoo technology. The same solution has also been applied to amphoteric surfactant systems. This provides complete cleaning, and hair conditioning fully equal to separate conditioners without the problems of sebum interactions and conditioner build-up. This was achieved by keeping the dimethicone in suspension throughout the shampoo process. During rinsing, excess water breaks the crystalline lattice and allows deposition of the dimethicone droplets onto the hair. Full cleaning and conditioning are, therefore, achieved in one application. Dimethicone build-up is not encountered as subsequent washes first remove soil and previously deposited dimethicone. Neither do neutral dimethicones show any reactions with sebum. The development of effective 2-in-1 technology has had a major impact on shampoo technology and consumer habits and practices. This has significantly changed the way consumers care for their hair.

  13. Condition Assessment of Ferrous Water Transmission and Distribution Systems State of Technology Review Report

    Science.gov (United States)

    This White Paper was developed to serve as the basis for discussion at a Technology Forum on Condition Assessment of Water Transmission and Distribution Systems that was held on September 9 and 10, 2008, at Edison, NJ. It was distributed to the Forum participants for review in a...

  14. Testing Predictive Models of Technology Integration in Mexico and the United States

    Science.gov (United States)

    Velazquez, Cesareo Morales

    2008-01-01

    Data from Mexico City, Mexico (N = 978) and from Texas, USA (N = 932) were used to test the predictive validity of the teacher professional development component of the Will, Skill, Tool Model of Technology Integration in a cross-cultural context. Structural equation modeling (SEM) was used to test the model. Analyses of these data yielded…

  15. State-of-the-Art of Virtual Reality Technologies for Children on the Autism Spectrum

    Science.gov (United States)

    Parsons, Sarah; Cobb, Sue

    2011-01-01

    In the past decade there has been a rapid advance in the use of virtual reality (VR) technologies for leisure, training and education. VR is argued to offer particular benefits for children on the autism spectrum, chiefly because it can offer simulations of authentic real-world situations in a carefully controlled and safe environment. Given the…

  16. State of the art HOT performances for Sofradir II-VI extrinsic technologies

    Science.gov (United States)

    Rubaldo, Laurent; Brunner, Alexandre; Guinedor, Pierre; Taalat, Rachid; Sam-giao, Diane; Kerlain, Alexandre; Dargent, Loïc.; Nicolas, Péré-Laprene; Chaffraix, Vincent; Bourqui, Marie-Lise; Loquet, Yannick; Coussement, Jerome

    2016-05-01

    SOFRADIR is the worldwide leader on the cooled IR detector market for high-performance space, military and security applications thanks to a well mastered Mercury Cadmium Telluride (MCT) technology, and recently thanks to the acquisition of III-V technology: InSb, InGaAs, and QWIP quantum detectors. Strong and continuous development efforts are deployed to deliver cutting edge products with improved performances in terms of spatial and thermal resolution, low excess noise and high operability. The actual trend in quantum IR detector development is the design of very small pixel, with high operating temperature. To maintain the detector performances and operability at high temperature, the number of pixels exhibiting extra noise like 1/f and RTS noise must be limited. This paper presents the recent developments achieved in Sofradir in terms of HOT MCT extrinsic p on n technology, blue MW band (cut-off wavelength of 4.2μm at 150K) and extended MW band (cut-off wavelength of 5.3μm at 130K). Comparison between optimized and non-optimized technology will be presented in terms of NETD temperature dependency, MTF, 1/f noise and the corresponding impact on RFPN (Residual Fixe Pattern Noise) and its stability up to 170K will be shown.

  17. Evaluation of state of the art technologies, GLOBEMEN Deliverable D411

    DEFF Research Database (Denmark)

    van den Berg, Roel; Hannus, Matti; Pedersen, Jens Dahl

    2000-01-01

    The report gives an overview of the current practice of inter-enterprise business processes and information and communication technology (ICT) support at a functional and technical level. ICT is seen as the enabler for current and future virtual enterprise concepts and functionality. It includes ...

  18. Developing Health Information Technology (HIT) Programs and HIT Curriculum: The Southern Polytechnic State University Experience

    Science.gov (United States)

    Zhang, Chi; Reichgelt, Han; Rutherfoord, Rebecca H.; Wang, Andy Ju An

    2014-01-01

    Health Information Technology (HIT) professionals are in increasing demand as healthcare providers need help in the adoption and meaningful use of Electronic Health Record (EHR) systems while the HIT industry needs workforce skilled in HIT and EHR development. To respond to this increasing demand, the School of Computing and Software Engineering…

  19. Condition Assessment of Ferrous Water Transmission and Distribution Systems State of Technology Review Report

    Science.gov (United States)

    This White Paper was developed to serve as the basis for discussion at a Technology Forum on Condition Assessment of Water Transmission and Distribution Systems that was held on September 9 and 10, 2008, at Edison, NJ. It was distributed to the Forum participants for review in a...

  20. Testing Predictive Models of Technology Integration in Mexico and the United States

    Science.gov (United States)

    Velazquez, Cesareo Morales

    2008-01-01

    Data from Mexico City, Mexico (N = 978) and from Texas, USA (N = 932) were used to test the predictive validity of the teacher professional development component of the Will, Skill, Tool Model of Technology Integration in a cross-cultural context. Structural equation modeling (SEM) was used to test the model. Analyses of these data yielded…

  1. Technology-aided programs for post-coma patients emerged from or in a minimally conscious state

    Directory of Open Access Journals (Sweden)

    Giulio E. Lancioni

    2014-12-01

    Full Text Available Post-coma persons in a minimally conscious state (MCS or emerged/emerging from such state (E-MCS, who are affected by extensive motor impairment and lack of speech, may develop an active role and interact with their environment with the help of technology-aided intervention programs. Although a number of studies have been conducted in this area during the last few years, new evidence about the efficacy of those programs is warranted. These three studies were an effort in that direction. Study I assessed a technology-aided program to enable six MCS participants to access preferred environmental stimulation independently. Studies II and III assessed technology-aided programs to enable six E-MCS participants to make choices. In Study II, three of those participants were led to choose among leisure and social stimuli, and caregiver interventions automatically presented to them. In Study III, the remaining three participants were led to choose (a among general stimulus/intervention options (e.g., songs, video-recordings of family members, and caregiver interventions and then (b among variants of those options. The results of all three studies were largely positive with substantial increases of independent stimulation access for the participants of Study I and independent choice behavior for the participants of Studies II and III. The results were analyzed in relation to previous data and in terms of their implications for daily contexts working with MCS and E-MCS persons affected by multiple disabilities.

  2. Short rotation woody crops: Using agroforestry technology for energy in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Wright, L L; Ranney, J W

    1991-01-01

    Agroforestry in the United States is being primarily defined as the process of using trees in agricultural systems for conservation purposes and multiple products. The type of agroforestry most commonly practiced in many parts of the world, that is the planting of tree crops in combination with food crops or pasture, is the type least commonly practiced in the United States. One type of agroforestry technique, which is beginning now and anticipated to expand to several million acres in the United States, is the planting of short-rotation woody crops (SRWCs) primarily to provide fiber and fuel. Research on SRWC's and environmental concerns are described.

  3. Least mean square fourth based microgrid state estimation algorithm using the internet of things technology.

    Science.gov (United States)

    Rana, Md Masud

    2017-01-01

    This paper proposes an innovative internet of things (IoT) based communication framework for monitoring microgrid under the condition of packet dropouts in measurements. First of all, the microgrid incorporating the renewable distributed energy resources is represented by a state-space model. The IoT embedded wireless sensor network is adopted to sense the system states. Afterwards, the information is transmitted to the energy management system using the communication network. Finally, the least mean square fourth algorithm is explored for estimating the system states. The effectiveness of the developed approach is verified through numerical simulations.

  4. Updating United States Advanced Battery Consortium and Department of Energy battery technology targets for battery electric vehicles

    Science.gov (United States)

    Neubauer, Jeremy; Pesaran, Ahmad; Bae, Chulheung; Elder, Ron; Cunningham, Brian

    2014-12-01

    Battery electric vehicles (BEVs) offer significant potential to reduce the nation's consumption of petroleum based products and the production of greenhouse gases however, their widespread adoption is limited largely by the cost and performance limitations of modern batteries. With recent growth in efforts to accelerate BEV adoption (e.g. the Department of Energy's (DOE) EV Everywhere Grand Challenge) and the age of existing BEV battery technology targets, there is sufficient motivation to re-evaluate the industry's technology targets for battery performance and cost. Herein we document the analysis process that supported the selection of the United States Advanced Battery Consortium's (USABC) updated BEV battery technology targets. Our technology agnostic approach identifies the necessary battery performance characteristics that will enable the vehicle level performance required for a commercially successful, mass market full BEV, as guided by the workgroup's OEM members. The result is an aggressive target, implying that batteries need to advance considerably before BEVs can be both cost and performance competitive with existing petroleum powered vehicles.

  5. Microencapsulation by solvent extraction/evaporation: reviewing the state of the art of microsphere preparation process technology.

    Science.gov (United States)

    Freitas, Sergio; Merkle, Hans P; Gander, Bruno

    2005-02-02

    The therapeutic benefit of microencapsulated drugs and vaccines brought forth the need to prepare such particles in larger quantities and in sufficient quality suitable for clinical trials and commercialisation. Very commonly, microencapsulation processes are based on the principle of so-called "solvent extraction/evaporation". While initial lab-scale experiments are frequently performed in simple beaker/stirrer setups, clinical trials and market introduction require more sophisticated technologies, allowing for economic, robust, well-controllable and aseptic production of microspheres. To this aim, various technologies have been examined for microsphere preparation, among them are static mixing, extrusion through needles, membranes and microfabricated microchannel devices, dripping using electrostatic forces and ultrasonic jet excitation. This article reviews the current state of the art in solvent extraction/evaporation-based microencapsulation technologies. Its focus is on process-related aspects, as described in the scientific and patent literature. Our findings will be outlined according to the four major substeps of microsphere preparation by solvent extraction/evaporation, namely, (i) incorporation of the bioactive compound, (ii) formation of the microdroplets, (iii) solvent removal and (iv) harvesting and drying the particles. Both, well-established and more advanced technologies will be reviewed.

  6. Are Physicians Likely to Adopt Emerging Mobile Technologies? Attitudes and Innovation Factors Affecting Smartphone Use in the Southeastern United States

    Science.gov (United States)

    Putzer, Gavin J; Park, Yangil

    2012-01-01

    The smartphone has emerged as an important technological device to assist physicians with medical decision making, clinical tasks, and other computing functions. A smartphone is a device that combines mobile telecommunication with Internet accessibility as well as word processing. Moreover, smartphones have additional features such as applications pertinent to clinical medicine and practice management. The purpose of this study was to investigate the innovation factors that affect a physician's decision to adopt an emerging mobile technological device such as a smartphone. The study sample consisted of 103 physicians from community hospitals and academic medical centers in the southeastern United States. Innovation factors are elements that affect an individual's attitude toward using and adopting an emerging technology. In our model, the innovation characteristics of compatibility, job relevance, the internal environment, observability, personal experience, and the external environment were all significant predictors of attitude toward using a smartphone. These influential innovation factors presumably are salient predictors of a physician's attitude toward using a smartphone to assist with clinical tasks. Health information technology devices such as smartphones offer promise as a means to improve clinical efficiency, medical quality, and care coordination and possibly reduce healthcare costs. PMID:22737094

  7. Are physicians likely to adopt emerging mobile technologies? Attitudes and innovation factors affecting smartphone use in the Southeastern United States.

    Science.gov (United States)

    Putzer, Gavin J; Park, Yangil

    2012-01-01

    The smartphone has emerged as an important technological device to assist physicians with medical decision making, clinical tasks, and other computing functions. A smartphone is a device that combines mobile telecommunication with Internet accessibility as well as word processing. Moreover, smartphones have additional features such as applications pertinent to clinical medicine and practice management. The purpose of this study was to investigate the innovation factors that affect a physician's decision to adopt an emerging mobile technological device such as a smartphone. The study sample consisted of 103 physicians from community hospitals and academic medical centers in the southeastern United States. Innovation factors are elements that affect an individual's attitude toward using and adopting an emerging technology. In our model, the innovation characteristics of compatibility, job relevance, the internal environment, observability, personal experience, and the external environment were all significant predictors of attitude toward using a smartphone. These influential innovation factors presumably are salient predictors of a physician's attitude toward using a smartphone to assist with clinical tasks. Health information technology devices such as smartphones offer promise as a means to improve clinical efficiency, medical quality, and care coordination and possibly reduce healthcare costs.

  8. UNITED STATES DEPARTMENT OF ENERGY WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2007

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S

    2008-08-12

    The Office of Environmental Management's (EM) Roadmap, U.S. Department of Energy--Office of Environmental Management Engineering & Technology Roadmap (Roadmap), defines the Department's intent to reduce the technical risk and uncertainty in its cleanup programs. The unique nature of many of the remaining facilities will require a strong and responsive engineering and technology program to improve worker and public safety, and reduce costs and environmental impacts while completing the cleanup program. The technical risks and uncertainties associated with cleanup program were identified through: (1) project risk assessments, (2) programmatic external technical reviews and technology readiness assessments, and (3) direct site input. In order to address these needs, the technical risks and uncertainties were compiled and divided into the program areas of: Waste Processing, Groundwater and Soil Remediation, and Deactivation and Decommissioning (D&D). Strategic initiatives were then developed within each program area to address the technical risks and uncertainties in that program area. These strategic initiatives were subsequently incorporated into the Roadmap, where they form the strategic framework of the EM Engineering & Technology Program. The EM-21 Multi-Year Program Plan (MYPP) supports the goals and objectives of the Roadmap by providing direction for technology enhancement, development, and demonstrations that will lead to a reduction of technical uncertainties in EM waste processing activities. The current MYPP summarizes the strategic initiatives and the scope of the activities within each initiative that are proposed for the next five years (FY2008-2012) to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. As a result of the importance of reducing technical risk and uncertainty in the EM Waste

  9. The politics of technology and site location: impact of state interventionism on an Indian public sector firm

    Directory of Open Access Journals (Sweden)

    Dilip Subramanian

    2013-11-01

    Full Text Available Can an industrial organisation simultaneously fulfil economic and social functions, that is to say successfully reconcile its own priorities of optimal resource utilisation and productive efficiency with the larger objectives of social justice defined for it by public authorities? This is the central question this paper whose compass is restricted to the 1980s asks, and seeks to answer on the basis of a study of locational and technology choices at a big public sector manufacturing firm, Indian Telephone Industries. It will show how decisions pertaining both to the implantation of new state-owned factories and the sourcing of technology were shaped not by an economic rationale but a political one where employment generation took precedence over all other considerations. This was a consequence, on the one hand, of the paradigm of state-initiated industrial development embraced by India after Independence in 1947 and which held out the promise of future prosperity for the population at large; on the other, of the mode of governance prevailing in public enterprises where state interventionism rhymed with the complete loss of autonomy for managements. The paper concludes by pointing out that however justified the redistributive goals allocated to public enterprises from the standpoint of improving living standards, they proved highly detrimental to their efficient working as well as onerous for the exchequer.

  10. A state-of-the-art report on the off-gas treatment technology generated from the nuclear facilities

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Lee, Hoo Geun; Park, Geun Il; Choi, Byung Seon; Lee, Kee Won; Cho, Il Hoon; Kim, Jung Kook; Park, Hyun Soo

    1997-10-01

    This state-of-the-art report describes various technologies for offgas treatment. It provides comprehensive treatment technologies of the extensive subject such as particulates, radioactive iodine, carbon dioxide, Kr/Xe and Cs/Ru. This report also incorporates the wastes generation and its characteristics as well as the historical and current management practices. A number of review articles by experts in various area of concern and some of the removal systems that have been designed for power plants and, particularly, for spent fuel reusing plants are also involved. As a result, it can be drawn that the drying processes for offgas treatment have much benefits in standpoints of simplicity, economy, disposal safety and resource reuse rather than the wet processes. (author). 226 refs., 38 tabs., 44 figs

  11. A state of the art report on the decontamination technology for dry ice blasting

    Energy Technology Data Exchange (ETDEWEB)

    Shin, J. M.; Kim, K. H.; Park, J. J.; Lee, H. H.; Yang, M. S.; Nam, S. H.; Kim, M. J

    2000-05-01

    DUPIC fuel fabrication process is a dry processing technology to manufacture CANDU compatible fuel through a direct reprocessing fabrication process from spent PWR fuel. DUPIC fuel fabrication process consists of the slitting of the spent PWR fuel rods, OREOX processing, homogeneous mixing, pelletizing and sintering. All these processes should be conducted by remote means in a M6 hot cell at IMEF. Since DUPIC fuel fabrication process includes powder handling process of highly radioactive spent fuel, decontamination of highly radioactive particulates from all types of surfaces such as DUPIC fuel manufacturing equipment, hot cell floor, tools is very important to improve the safety of hot cell and reduce the dose exposure to operator, This report describes various technologies for dry ice blasting. It provides the fundamentals of dry ice blasting decontamination and technical review of dry ice blasting on the radioactive decontamination.

  12. State of the art of nanocrystals technology for delivery of poorly soluble drugs

    Science.gov (United States)

    Zhou, Yuqi; Du, Juan; Wang, Lulu; Wang, Yancai

    2016-09-01

    Formulation of nanocrystals is a distinctive approach which can effectively improve the delivery of poorly water-soluble drugs, thus enticing the development of the nanocrystals technology. The characteristics of nanocrystals resulted in an exceptional drug delivery conductance, including saturation solubility, dissolution velocity, adhesiveness, and affinity. Nanocrystals were treated as versatile pharmaceuticals that could be delivered through almost all routes of administration. In the current review, oral, pulmonary, and intravenous routes of administration were presented. Also, the targeting of drug nanocrystals, as well as issues of efficacy and safety, were also discussed. Several methods were applied for nanocrystals production including top-down production strategy (media milling, high-pressure homogenization), bottom-up production strategy (antisolvent precipitation, supercritical fluid process, and precipitation by removal of solvent), and the combination approaches. Moreover, this review also described the evaluation and characterization of the drug nanocrystals and summarized the current commercial pharmaceutical products utilizing nanocrystals technology.

  13. Computer-generated slides: outdated technology or state-of-the-art presentation style?

    Science.gov (United States)

    Hinds, K F

    1998-01-01

    With the explosion of computerization, it appears that the business community is switching to computer-based presentations, projecting onto a screen directly from a computer, instead of the old standard of presenting with slides. However, the dental profession has been slow to follow. Although some speakers have switched to computer-based presentations, slides are still the standard in 1998. With the advent of numerous new computer software programs, clinicians are now able to generate highly sophisticated slides, that can be an equally powerful medium to communicate with the audience. Unfortunately, many clinicians are not taking advantage of the benefits of this technology. This article explains the simplicity of generating professional, high quality slides, reviews the major programs and equipment available to accomplish this task, and previews the multitude of applications this technology offers to practitioners as well as educators.

  14. Key technologies in whole lifecycle of electromechanical products: state of art

    Institute of Scientific and Technical Information of China (English)

    DUAN Guang-hong; XIANG Dong; MOU Peng

    2005-01-01

    Nowadays, issues on population, environment and resource have become the world's attentive focus. Sustainable development has been widely accepted around the world. As one of the biggest waste generator and resources consumer, manufacturing industry is facing more challenges as well as opportunities. In order to reduce both resource consuming and waste discharging effectively, traditionally manufacturing mode should be improved. Newly emerged creative technologies and strategies, including green design, green manufacturing and cleaner production,are regarded as the radical resolvent for current environment and resource issues and they will be the only way in the future that manufacturing will evolve. In this paper, a serial of research on green design/manufacturing and cleaner product theoretically and practically was presented. These creative technology and strategy will give strong support to‘green’the whole electromechanical designing and manufacturing processes.

  15. Past, present, and future activities in space power technology in the United States of America

    Science.gov (United States)

    Ambrus, Judith H.

    1987-01-01

    Space power technology research in the U.S. is examined. The objectives for advanced power systems are long life, safety, flexibility, modularity, growth capability, and autonomy. Research in the areas of photovoltaic arrays, electrical energy storage, and the development of solar dynamic power systems and radio thermal generators is described. The applications of advances in power generation, energy storage, and power management and distribution to the Space Station are discussed.

  16. State-of-the-Art Review of Low-Cost Collector Technologies

    Science.gov (United States)

    1981-06-01

    1I SERI Heliostat redirect the sun’s energy to a receiver mounted in a central area. In the receiver, the energy is absorbed into a circulating ( heat ...Mobility Low-Cost Parabolic Trough Survivability Light-Weight Thin-Film Reliability Heliostats Polymers Military 20. ABSTRACT (Contine an revers. deo It... heliostats and parabolic dish collectors. In addition several criteria were evaluated with respect to low-cost collector technologies These included

  17. A state of the art on coastal environmental protection using radioisotope tracer technology

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Sung Hee; Jin, Joon Ha; Kim, Jong Bum; Choi, Byung Jong

    2002-04-01

    Construction of artificial structures has caused a sediment process change due to the variation of hydraulic condition in Korea. Subsequently we have a serious problem of shoaling for shoreline deformation, siltation of the harbor and shipping channel. To protect those abnormal environmental changes, a large estimate has been spent for additional construction such as outer wall facilities, littoral nourishment and dredging. Systematic long-term studies should be carried out to understand the causes of environmental change. In addition, comprehensive plan is required for its monitoring and prevention. The radioisotope application studies for coastal environmental protection have not been actively performed only in the developed countries like France, Canada, and Australia etc., but also in many developing countries like Poland, India. Since KAERI has performed two experiments in costal area of Korea in 1960s, no more study has been reported. Recently the studies of radiotracer application technology is getting more interested in terms of on-line data acquisition and analysis for the validation of the numerical simulation models. The experiment using radiotracer becomes an important part of the method to solve the problems happening in coastal environment, as it supplies data with high confidence in the field. On the basis of the experience obtained from the researches for industrial application of radiotracer technology, KAERI is going to make its first step to the development of the radiotracer technology for costal environmental studies.

  18. Survey of state-of-the-art technology in remote concealed weapon detection

    Science.gov (United States)

    Currie, Nicholas C.; Demma, Fred J.; Ferris, David D., Jr.; McMillan, Robert W.; Vannicola, Vincent C.; Wicks, Michael C.

    1995-09-01

    Recent advances in millimeter-wave (MMV), microwave, and infrared (IR) technologies provide the means to detect concealed weapons remotely through clothing and is some cases through walls. Since the developemnt of forward-looking infrared instruments, work has been ongoing in attempting to use these devices for concealed weapon detection based on temperatrue differences between metallic weapons and in the infrared has led to the development of techniques based on lower frequencies. Focal plane arrays operating MMW frequencies are becoming available which eliminate the need for a costly and slow mechanical scanner for generating images. These radiometric sensors also detect temperature differences between weapons and the human body background. Holographic imaging systems operating at both microwave and MMW frequencies have been developed which generate images of near photographic quality through clothing and through thin, nonmetallic walls. Finally, a real- aperture radar is useful for observing people and detecting weapons through walls and in the field under reduced visibility conditions. This paper will review all of these technologies and give examples of images generated by each type of sensor. An assessment of the future of this technology with regard to law enforcement applications will also be given.

  19. State of the Art in Electronic Assistive Technologies for People with Dementia

    Science.gov (United States)

    Lou, Ricardo Castellot; Giuliano, Angele; Mulvenna, Maurice D.

    It is estimated by 2050 that one-third of Europe's population will be over 60. Life expectancy has on average already risen by 2.5 years per decade and the number of old people aged 80+ is expected to grow by 180%. Nowadays, there are 5.5 million cases of Alzheimer-afflicted people in Europe and more new cases being added every year. In fact Alzheimer's disease has been called the "plague of the twenty-first century". There is currently no cure for this disease; however, prevention and early diagnosis may play a huge role in delaying the onset of the worst effects of this severe disease. Modern technologies could have an important role to satisfy main needs of people with dementia. Nonetheless, despite recent advancements in information and communication technologies and growing sales numbers, industry has been rather reluctant to standardise access technologies and to implement them in a "Design for All approach". Because of this, in last years, there have been launched in Europe a great number of initiatives, both public and private, which try to improve the situation of those persons who suffer this ailment and that will be detailed in this chapter.

  20. Clarification technologies for monoclonal antibody manufacturing processes: Current state and future perspectives.

    Science.gov (United States)

    Singh, Nripen; Arunkumar, Abhiram; Chollangi, Srinivas; Tan, Zhijun George; Borys, Michael; Li, Zheng Jian

    2016-04-01

    Considerable progress has been made increasing productivity of cell cultures to meet the rapidly growing demand for antibody biopharmaceuticals through increased cell densities and longer culture times. This in turn has dramatically increased the burden of process and product related impurities on the purification processes. In addition, current trends in the biopharmaceutical industry point toward both increased productivity and targeting smaller patient populations for new indications. Taken together, these developments are driving the industry to explore alternative separation technologies as a future manufacturing strategy. Clarification technologies well established in other industries, such as flocculation and precipitation are increasingly considered as a viable solution to address this bottleneck in antibody processes. However, several technical issues need to be fully addressed including suitability as a platform application, robustness, process cost, toxicity, and clearance. This review will focus on recent efforts to incorporate new generation clarification technologies for mammalian cell cultures producing monoclonal antibodies as well as challenges to their implementation supported by a case study. © 2015 Wiley Periodicals, Inc.

  1. State-of-the-art human gene therapy: part I. Gene delivery technologies.

    Science.gov (United States)

    Wang, Dan; Gao, Guangping

    2014-01-01

    Safe and effective gene delivery is a prerequisite for successful gene therapy. In the early age of human gene therapy, setbacks due to problematic gene delivery vehicles plagued the exciting therapeutic outcome. However, gene delivery technologies rapidly evolved ever since. With the advancement of gene delivery techniques, gene therapy clinical trials surged during the past decade. As the first gene therapy product (Glybera) has obtained regulatory approval and reached clinic, human gene therapy finally realized the promise that genes can be medicines. The diverse gene delivery techniques available today have laid the foundation for gene therapy applications in treating a wide range of human diseases. Some of the most urgent unmet medical needs, such as cancer and pandemic infectious diseases, have been tackled by gene therapy strategies with promising results. Furthermore, combining gene transfer with other breakthroughs in biomedical research and novel biotechnologies opened new avenues for gene therapy. Such innovative therapeutic strategies are unthinkable until now, and are expected to be revolutionary. In part I of this review, we introduced recent development of non-viral and viral gene delivery technology platforms. As cell-based gene therapy blossomed, we also summarized the diverse types of cells and vectors employed in ex vivo gene transfer. Finally, challenges in current gene delivery technologies for human use were discussed.

  2. A Robust WLS Power System State Estimation Method Integrating a Wide-Area Measurement System and SCADA Technology

    Directory of Open Access Journals (Sweden)

    Tao Jin

    2015-04-01

    Full Text Available With the development of modern society, the scale of the power system is rapidly increased accordingly, and the framework and mode of running of power systems are trending towards more complexity. It is nowadays much more important for the dispatchers to know exactly the state parameters of the power network through state estimation. This paper proposes a robust power system WLS state estimation method integrating a wide-area measurement system (WAMS and SCADA technology, incorporating phasor measurements and the results of the traditional state estimator in a post-processing estimator, which greatly reduces the scale of the non-linear estimation problem as well as the number of iterations and the processing time per iteration. This paper firstly analyzes the wide-area state estimation model in detail, then according to the issue that least squares does not account for bad data and outliers, the paper proposes a robust weighted least squares (WLS method that combines a robust estimation principle with least squares by equivalent weight. The performance assessment is discussed through setting up mathematical models of the distribution network. The effectiveness of the proposed method was proved to be accurate and reliable by simulations and experiments.

  3. Gasification of biomass for energy production. State of technology in Finland and global market perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Wilen, C.; Kurkela, E. [VTT Energy, Espoo (Finland). Energy Production Technologies

    1997-12-31

    This report reviews the development of the biomass gasification technology in Finland over the last two decades. Information on Finnish biomass resources and use, energy economy and national research policy is provided as background. Global biomass resources and potential energy from biomass markets are also assessed based on available literature, to put the development of the gasification technology into a wider perspective of global biomass utilization for energy production. The increasing use of biomass and other indigenous forms of energy has been part and parcel of the Finnish energy policy for some twenty years. Biomass and peat account for almost 20% of the production of primary energy in Finland. As the consumption of biofuels is significantly lower than the annual growth or renewal, the use of bioenergy is considered to be an important measure of reducing carbon dioxide emissions. Research and development on thermal gasification of solid fuels was initiated in the late 1970s in Finland. The principal aim was to decrease the dependence of Finnish energy economy on imported oil by increasing the utilization potential of indigenous fuels. Development in the early 1980s focused on simple atmospheric-pressure fuel gas applications including a gasification heating plant. Eight Bioneer updraft gasifiers (abt 5 MW{sub th}) were constructed in 1982-1986, and a new Bioneer gasifier was commissioned in eastern Finland in 1996. A Pyroflow circulating fluidised-bed gasifies was also commercialized in the mid-1980s; four gasifiers (15-35 MW{sub th}) were commissioned. In the late 1980s the interest in integrated gasification combined-cycle (IGCC) power plants, based on pressurised air gasification of biomass and hot gas cleanup, increased in Finland and in many other countries. The utilization potential for indigenous fuels is mainly in medium-scale combined heat and electricity production (20-150 MW,). Foster Wheeler Energia Oy, Carbona Inc. and Imatran Voima Oy are

  4. 3D time-of-flight distance measurement with custom solid-state image sensors in CMOS/CCD-technology

    OpenAIRE

    Lange, Robert de

    2006-01-01

    Three-D time-of-flight distance measurement with custom solid-state image sensors in CMOS/CCD-technology Da wir in einer dreidimensionalen Welt leben, erfordert eine geeignete Beschreibung unserer Umwelt für viele Anwendungen Kenntnis über die relative Position und Bewegung der verschiedenen Objekte innerhalb einer Szene. Die daraus resultierende Anforderung räumlicher Wahrnehmung ist in der Natur dadurch gelöst, daß die meisten Tiere mindestens zwei Augen haben. Diese Fähigkeit des Stere...

  5. A Study of Sustainable Development of China's State-Level Economic and Technological Development Zones

    Institute of Scientific and Technical Information of China (English)

    XinzhiHu

    2005-01-01

    State-level economic and technological development zones (ETDZs) are products of China's reform and opening-up policies and a new engine of growth for the Chinese economy. They have made tremendous contributions to the development of the Chinese economy. However,some problems have emerged in the course of this progress and new challenges are still lying ahead. Sustainable development is possible only when the strategy and objectives of development are adjusted, when the integrated investment environment is optimized, when industries are upgraded, when technical innovations are made, when independent innovation capabilities are lifted, when the mode of economic growth is changed, and when innovations are made in government management.

  6. Solid state NMR: The essential technology for helical membrane protein structural characterization.

    Science.gov (United States)

    Cross, Timothy A; Ekanayake, Vindana; Paulino, Joana; Wright, Anna

    2014-02-01

    NMR spectroscopy of helical membrane proteins has been very challenging on multiple fronts. The expression and purification of these proteins while maintaining functionality has consumed countless graduate student hours. Sample preparations have depended on whether solution or solid-state NMR spectroscopy was to be performed - neither have been easy. In recent years it has become increasingly apparent that membrane mimic environments influence the structural result. Indeed, in these recent years we have rediscovered that Nobel laureate, Christian Anfinsen, did not say that protein structure was exclusively dictated by the amino acid sequence, but rather by the sequence in a given environment (Anfinsen, 1973) [106]. The environment matters, molecular interactions with the membrane environment are significant and many examples of distorted, non-native membrane protein structures have recently been documented in the literature. However, solid-state NMR structures of helical membrane proteins in proteoliposomes and bilayers are proving to be native structures that permit a high resolution characterization of their functional states. Indeed, solid-state NMR is uniquely able to characterize helical membrane protein structures in lipid environments without detergents. Recent progress in expression, purification, reconstitution, sample preparation and in the solid-state NMR spectroscopy of both oriented samples and magic angle spinning samples has demonstrated that helical membrane protein structures can be achieved in a timely fashion. Indeed, this is a spectacular opportunity for the NMR community to have a major impact on biomedical research through the solid-state NMR spectroscopy of these proteins. Copyright © 2013 Elsevier Inc. All rights reserved.

  7. State of the Science in Technology Transfer: At the Confluence of Academic Research and Business Development--Merging Technology Transfer with Knowledge Translation to Deliver Value

    Science.gov (United States)

    Lane, Joseph P.

    2010-01-01

    The practice of technology transfer continues to evolve into a discipline. Efforts continue in the field of assistive technology (AT) to move technology-related prototypes, resulting from development in the academic sector, to product commercialization within the business sector. The article describes how technology transfer can be linked to…

  8. Technologies for sorting, assaying, classifying, and certifying transuranic waste within the United States

    Energy Technology Data Exchange (ETDEWEB)

    Pound, D.G. (Idaho National Engineering Lab., Idaho Falls, ID (USA))

    1990-01-01

    At the Idaho National Engineering Laboratory (INEL), the Stored Waste Examination Pilot Plant (SWEPP) was developed to provide nondestructive examination and assay techniques for examining and certifying TRU wastes without opening the waste container. This technology was developed, primarily for stored TRU waste, to evaluate waste package compliance with Waste Disposal Acceptance Criteria and Transportation requirements prior to shipment. These techniques include real-time x-ray radiography, passive and active neutron assay, and ultrasonic container integrity examination. These techniques provide the necessary information to ensure safe transportation, handling, and disposal of the waste at the Waste Isolation Pilot Plant (WIPP). 1 ref., 3 figs.

  9. Technologies for sorting, assaying, classifying, and certifying transuranic waste within the United States

    Energy Technology Data Exchange (ETDEWEB)

    Pound, D.G. (Idaho National Engineering Lab., Idaho Falls (USA))

    1990-01-01

    At the Idaho National Engineering Laboratory (INEL), the Stored Waste Examination Pilot Plant (SWEPP) was developed to provide nondestructive examination and assay techniques for examining and certifying TRU wastes without opening the waste container. This technology was developed, primarily for stored TRU waste, to evaluate waste package compliance with Waste Disposal Acceptance Criteria and Transportation requirements prior to shipment. These techniques include real-time x-ray radiography, passive and active neutron assay, and ultrasonic container integrity examination. These techniques provide the necessary information to ensure safe transportation, handling, and disposal of the waste at the Waste Isolation Pilot Plant (WIPP). (orig.).

  10. CTS /Hermes/ - United States experiments and operations summary. [Communications Technology Satellite

    Science.gov (United States)

    Donoughe, P. L.; Hunczak, H. R.

    1977-01-01

    The U.S. experiments conducted with the Communications Technology Satellite, a joint Canadian-U.S. venture launched in 1976, are discussed. The 14/12 GHz frequencies employed by the 200-W transmitter on board the satellite provide two-way television and voice communications. Applications of the satellite in the categories of health care, community services and education are considered; experiments have also made use of the special properties of the super-high frequency band (e.g. link characterization and digital communications). Time-sharing of the 14/12 GHz communication between the U.S. and Canada has functioned well.

  11. Biomass gasification cogeneration – A review of state of the art technology and near future perspectives

    DEFF Research Database (Denmark)

    Ahrenfeldt, Jesper; Thomsen, Tobias; Henriksen, Ulrik Birk

    2013-01-01

    in future energy systems. Thermal gasification of biomass is proved throughout this article to be both highly flexible and efficient if used optimally. Cogeneration processes with production of heat-and-power, heat-power-and-fuel or heat-power-and-fertilizer are described and compared. The following......Biomass is a renewable resource from which a broad variety of commodities can be produced. However, the resource is scarce and must be used with care to avoid depleting future stock possibilities. Flexibility and efficiency in production are key characteristics for biomass conversion technologies...

  12. Manufacturing Technology Development of Advanced Components for High Power Solid State Lasers

    Science.gov (United States)

    2010-07-19

    interferometer (VeriFire) for optical path distance measurement and the AFB technology for YAG sample preparation. The ONYX OPTICS, INC. OMV »i|’>J.i Final...linear fit to data by using Eq. (3). ONYX OPTICS, INC. 10 OMV » •«..!• Final Report for Contract # W911NF-07-2-0048 3. Thermal properties of AFB...direction. ONYX OPTICS, INC. 18 OMV *>;’«v.K. Final Report for Contract # W911NF-07-2-0048 z(mm) (a) (b) ,33 7GPa 1.4 ^ 29 MPa 1.4 •/ ’ r

  13. 78 FR 22302 - United States v. United Technologies Corporation and Goodrich Corporation; Public Comments and...

    Science.gov (United States)

    2013-04-15

    ... is confidential, possibly including information relating to the acquired company's customers.\\2... company. Mr. Oak has retired, and the United States does not believe it would be reasonable to require UTC... proposed remedies, its perception of the market structure, and its views of the nature of the case). \\5\\ Cf...

  14. Electronic States near Dislocations in Transition Metals : An Application of Quantum Chemistry in Technology

    NARCIS (Netherlands)

    Hosson, J.Th.M. De

    1980-01-01

    This paper outlines a model for calculating the localized states of a <100> edge dislocation in α-Fe. The model used for the calculations is based on the multiple-scattering model (SCF-Xα-SW). The purpose of this research is twofold: (1) To determine changes in electronic structure of the lattice ne

  15. Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007 - 2012; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Hand, Maureen

    2015-06-15

    This presentation provides a summary of IEA Wind Task 26 report on Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007-2012

  16. Robotics in neurosurgery: state of the art and future technological challenges.

    Science.gov (United States)

    Zamorano, L; Li, Q; Jain, S; Kaur, G

    2004-06-01

    The use of robotic technologies to assist surgeons was conceptually described almost thirty years ago but has only recently become feasible. In Neurosurgery, medical robots have been applied to neurosurgery for over 19 years. Nevertheless this field remains unknown to most neurosurgeons. The intrinsic characteristics of robots, such as high precision, repeatability and endurance make them ideal surgeon's assistants. Unfortunately, limitations in the current available systems make its use limited to very few centers in the world. During the last decade, important efforts have been made between academic and industry partnerships to develop robots suitable for use in the operating room environment. Although some applications have been successful in areas of laparoscopic surgery and orthopaedics, Neurosurgery has presented a major challenge due to the eloquence of the surrounding anatomy. This review focuses on the application of medical robotics in neurosurgery. The paper begins with an overview of the development of the medical robotics, followed by the current clinical applications in neurosurgery and an analysis of current limitations. We discuss robotic applications based in our own experience in the field. Next, we discuss the technological challenges and research areas to overcome those limitations, including some of our current research approaches for future progress in the field.

  17. State of the art of bioenergy technologies and primary applications in the Maritime provinces

    Energy Technology Data Exchange (ETDEWEB)

    Preto, F. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Energy Technology Centre

    2005-07-01

    This paper discussed both opportunities and resources in the bioenergy industry in the Maritimes. Agricultural residues were listed by province, including urban and forestry residues. Bioenergy utilization was discussed, with reference to the limited quantities of biomass and current technologies. Issues concerning biomass burning were examined, along with power generation issues. The benefits and challenges of the Williams Lake Generating Station were described with reference to co-firing and and distributed generation approaches. Potential co-firing sites were identified and planning issues were reviewed. Distributed generation issues were also discussed, with reference to combustion-based systems and gasification and pyrolysis based systems. Indirect fired gas turbines were also reviewed, with reference to the limitations imposed by high temperature heat exchangers. Various biomass-fired units were reviewed along with the current status of gasification. Pyrolysis issues were discussed, including flash pyrolysis and its imminent commercialization and pilot plants. The limited uses of and experience with pyrolysis oils were reviewed. It was concluded that coal-fired generating capacity to co-fire biomass was the most cost-effective path to near-term use of renewable biomass feedstock. Detailed site analyses were necessary for successful co-firing applications. Utilization technologies for pyrolysis oils required further development. It was also suggested that gas clean-up issues need to be resolved for the utilization of biomass-derived syngas. tabs, figs.

  18. State of the art and future of robot technology; Robot gijutsu no genjo to shorai

    Energy Technology Data Exchange (ETDEWEB)

    Hashimoto, A. [Kinki University, Osaka (Japan). Faculty of Biology Oriented Science and Technology

    1995-12-31

    This paper outlines mainly the mechanism and control of robots among various robot technologies. Robot is a mechanical equipment satisfying a part or all of three following conditions: (1) three elements equivalent to brain, hand and foot, (2) external sensors for remote detection and contact detection, and (3) internal sensors for balance sense and proprioceptive sense. Motion functions with the degree of freedom equivalent at least to a part of manipulation actions of human arm and hand are required for the robot which is expected to be an intelligent machine substituted for human beings dislike simple repetitive works. This paper also explains some current examples of robot`s joint drive mechanism and motion control system. On control technology, the autonomous attitude control of plasma spray guns using ultrasonic sensor was studied experimentally, and the reliability and accuracy of location and attitude control were confirmed. On medical and welfare robot, the friendly rehabilitation equipment for finger joint troubles was developed on the basis of a multi-joint robot. 4 refs., 17 figs., 2 tabs.

  19. Review of the state-of-the-art of exhaust particulate filter technology in internal combustion engines.

    Science.gov (United States)

    Guan, Bin; Zhan, Reggie; Lin, He; Huang, Zhen

    2015-05-01

    The increasingly stringent emission regulations, such as US 2010, Tier 2 Bin 5 and beyond, off-road Tier 4 final, and Euro V/5 for particulate matter (PM) reduction applications, will mandate the use of the diesel particulate filters (DPFs) technology, which is proven to be the only way that can effectively control the particulate emissions. This paper covers a comprehensive overview of the state-of-the-art DPF technologies, including the advanced filter substrate materials, the novel catalyst formulations, the highly sophisticated regeneration control strategies, the DPF uncontrolled regenerations and their control methodologies, the DPF soot loading prediction, and the soot sensor for the PM on-board diagnostics (OBD) legislations. Furthermore, the progress of the highly optimized hybrid approaches, which involves the integration of diesel oxidation catalyst (DOC) + (DPF, NOx reduction catalyst), the selective catalytic reduction (SCR) catalyst coated on DPF, as well as DPF in the high-pressure exhaust gas recirculation (EGR) loop systems, is well discussed. Besides, the impacts of the quality of fuel and lubricant on the DPF performance and the maintenance and retrofit of DPF are fully elaborated. Meanwhile, the high efficiency gasoline particulate filter (GPF) technology is being required to effectively reduce the PM and particulate number (PN) emissions from the gasoline direct injection (GDI) engines to comply with the future increasingly stricter emissions regulations.

  20. Computer technology-based interventions in HIV prevention: state of the evidence and future directions for research

    Science.gov (United States)

    Noar, Seth M.

    2015-01-01

    Computer technology-based interventions (CBIs) represent a promising area for HIV prevention behavioral intervention research. Such programs are a compelling prevention option given their potential for broad reach, customized content, and low cost delivery. The purpose of the current article is to provide a review of the state of the literature on CBIs. First, we define CBIs in HIV prevention and highlight the many advantages of such interventions. Next, we provide an overview of what is currently known regarding the efficacy of CBIs in HIV prevention, focusing on two recent meta-analyses of this literature. Finally, we propose an agenda for future directions for research in the area of CBIs, using the RE-AIM model as an organizing guide. We conclude that with the continued growth of computer technologies, opportunities to apply such technologies in HIV prevention will continue to blossom. Further research is greatly needed to advance an understanding of not only how and under what circumstances CBIs can be efficacious, but also how the reach, adoption, implementation, and maintenance of such programs in clinical and community settings can be achieved. PMID:21287420

  1. The role of technology in minimally invasive surgery: state of the art, recent developments and future directions.

    Science.gov (United States)

    Tonutti, Michele; Elson, Daniel S; Yang, Guang-Zhong; Darzi, Ara W; Sodergren, Mikael H

    2017-03-01

    The diffusion of minimally invasive surgery has thrived in recent years, providing substantial benefits over traditional techniques for a number of surgical interventions. This rapid growth has been possible due to significant advancements in medical technology, which partly solved some of the technical and clinical challenges associated with minimally invasive techniques. The issues that still limit its widespread adoption for some applications include the limited field of view; reduced manoeuvrability of the tools; lack of haptic feedback; loss of depth perception; extended learning curve; prolonged operative times and higher financial costs. The present review discusses some of the main recent technological advancements that fuelled the uptake of minimally invasive surgery, focussing especially on the areas of imaging, instrumentation, cameras and robotics. The current limitations of state-of-the-art technology are identified and addressed, proposing future research directions necessary to overcome them. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  2. Assistive technology-based programs to promote communication and leisure activities by three children emerged from a minimal conscious state.

    Science.gov (United States)

    Stasolla, Fabrizio; Caffò, Alessandro O; Damiani, Rita; Perilli, Viviana; Di Leone, Antonia; Albano, Vincenza

    2015-02-01

    This study proposed the use of assistive technology (AT) to promote communication and leisure opportunities by three children with traumatic brain injury (TBI). Furthermore, it assessed the effects of such technology on the indices of positive participation and provided a social validation procedure. Three children emerged from a minimal conscious state and presenting extensive motor disabilities were involved. The intervention program allowed the participants to request and to choice preferred items independently and to perform literacy through a keyboard emulator. A multiple probe design across behaviors with post-intervention check was employed. Outcome measures were correct requests, understandable words, intervals with positive participation, and scores of social validation assessment. Request and choice behaviors and literacy improved significantly during intervention phases. During post-intervention check, all participants consolidated their performance. Moreover, indices of positive participation increased during intervention phases. Scores of social validation assessment showed that the combination of both behaviors was preferable to the same considered separately. AT program showed to be suitable for promoting constructive engagement and literacy behaviors by children with TBI. Future research is needed to generalize this data to a larger sample and to develop new technology for people with different levels of disabilities due to TBI.

  3. Location Study of Solar Thermal Power Plant in the State of Pernambuco Using Geoprocessing Technologies and Multiple-Criteria Analysis

    Directory of Open Access Journals (Sweden)

    Verônica Wilma B. Azevêdo

    2017-07-01

    Full Text Available Solar Thermal Technology for the generation of electricity in large scale has been a reality in the world since the 1980s, when the first large-sized solar plants in the United States were introduced. Brazil presents great potential for the development of large-scale projects, although it is noted that the main barriers for the insertion of this technology in Brazilian market are the lack of incentives and goals and associated costs. In a way to contribute to the insertion of solar thermal technology in Brazil, this paper presents a macro-spatial approach, based on the use of Multiple-Criteria Decision Analysis and Geoprocessing, for the location of solar thermal power plants. The applied methodology for Pernambuco, located in the Northeast Region of Brazil, considered the implantation of parabolic trough solar power plant of 80 MW, operating only in solar mode, without heat storage. Based on performed analysis, it was confirmed that Pernambuco presents great potential for the installation of solar power plants, especially in the backlands of Pernambuco. Performed validations in the model demonstrate that the methodology attended the objective once the consistence between the assigned weights to the thematic layers, individually, and the final Map of site suitability were evidenced.

  4. Establishment of database and network for research of stream generator and state of the art technology review

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun [Sungkyunkwan Univ., Seoul (Korea, Republic of)

    2004-02-15

    A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology.

  5. Job Performance Aids: Research and Technology State-of-the-Art

    Science.gov (United States)

    1978-07-01

    recommend design choices to the extent of page size and typography . The environmental constraints noted are generally human engineering considera...oiatureI Medium and Characteristco| Space Illumination Dirt Temeraurn Hotion Noise Time NasardISafety Hard-copy PrivA Page Size X X Typography X X...performance aids was developed at North Carolina State University (Smillie, Edsall, Ayoub, & Muller, 1976). That approach combines features of

  6. State of the art in surgical robotics: clinical applications and technology challenges.

    Science.gov (United States)

    Cleary, K; Nguyen, C

    2001-01-01

    Although it has been over 15 years since the first recorded use of a robot for a surgical procedure, the field of medical robotics is still an emerging one that has not yet reached a critical mass. Although robots have the potential to improve the precision and capabilities of physicians, the number of robots in clinical use is still very small. In this review article, we begin with a short historical review of medical robotics, followed by an overview of clinical applications where robots have been applied. The clinical applications are then discussed; they include neurosurgery, orthopedics, urology, maxillofacial surgery, radiosurgery, ophthalmology, and cardiac surgery. We conclude with a listing of technology challenges and research areas, including system architecture, software design, mechanical design, imaging compatible systems, user interface, and safety issues.

  7. Impact of the FY 2009 Building Technologies Program on United States Employment and Earned Income

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, Olga V.; Scott, Michael J.; Hostick, Donna J.; Dirks, James A.; Cort, Katherine A.

    2008-06-17

    The Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) is interested in assessing the potential economic impacts of its portfolio of subprograms on national employment and income. A special purpose input-output model called ImSET is used in this study of 14 Building Technologies Program subprograms in the EERE final FY 2009 budget request to the Office of Management and Budget in February 2008. Energy savings, investments, and impacts on U.S. national employment and earned income are reported by subprogram for selected years to the year 2025. Energy savings and investments from these subprograms have the potential of creating a total of 258,000 jobs and about $3.7 billion in earned income (2007$) by the year 2025.

  8. State of the art of diagnostic technology for early-stage melanoma.

    Science.gov (United States)

    Guitera, Pascale; Menzies, Scott W

    2011-05-01

    In the past few decades, rapid improvements in noninvasive optical technologies have revolutionized the diagnosis of early-stage melanoma. Current knowledge and limitations of these tools will be reviewed in this article. Dermoscopy has been recognized as the 'gold standard' in the screening phase. Digital dermoscopy monitoring and total-body photography are used to identify so-called 'featureless' melanoma only on the criteria of change over time. Automated instruments, as well as optical and nonmorphological methods, are still under development, and offer many opportunities to improve the speed and accuracy of the diagnosis of melanoma and/or to reduce the need for expertise. Despite a penetration depth limited to the upper dermis, the quasi-histological imaging achieved by in vivo reflectance confocal microscopy has been demonstrated to significantly aid diagnostic accuracy for selected melanocytic lesions. Future perspectives on diagnostic instrumentation will also be explored.

  9. United States Supports Distributed Wind Technology Improvements; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Sinclair, Karin

    2015-06-15

    This presentation provides information on the activities conducted through the Competitiveness Improvement Project (CIP), initiated in 2012 by the U.S. Department of Energy (DOE) and executed through the National Renewable Energy Laboratory (NREL) to support the distributed wind industry. The CIP provides research and development funding and technical support to improve distributed wind turbine technology and increase the competitiveness of U.S. small and midsize wind turbine manufacturers. Through this project, DOE/NREL assists U.S. manufacturers to lower the levelized cost of energy of wind turbines through component improvements, manufacturing process upgrades, and turbine testing. Ultimately, this support is expected to lead to turbine certification through testing to industry-recognized wind turbine performance and safety standards.

  10. A state of the art on coastal environmental protection using radioisotope tracer technology

    CERN Document Server

    Jung, S H; Jin, J H; Kim, J B

    2002-01-01

    Construction of artificial structures has caused a sediment process change due to the variation of hydraulic condition in Korea. Subsequently we have a serious problem of shoaling for shoreline deformation, siltation of the harbor and shipping channel. To protect those abnormal environmental changes, a large estimate has been spent for additional construction such as outer wall facilities, littoral nourishment and dredging. Systematic long-term studies should be carried out to understand the causes of environmental change. In addition, comprehensive plan is required for its monitoring and prevention. The radioisotope application studies for coastal environmental protection have not been actively performed only in the developed countries like France, Canada, and Australia etc., but also in many developing countries like Poland, India. Since KAERI has performed two experiments in costal area of Korea in 1960s, no more study has been reported. Recently the studies of radiotracer application technology is getting...

  11. [High-intensity focused ultrasound and prostate cancer: technology, state of the art and future].

    Science.gov (United States)

    Vespasiani, G; Asimakopoulos, A D; Finazzi Agrò, E; Virgili, G

    2008-01-01

    BACKGROUND. The potential applications of the high-intensity focused ultrasound (HIFU) as a minimally invasive therapy of the localized prostate cancer explain the growing interest of the urologic community towards this technique. HIFU has been assessed for its role in the treatment of localized prostate cancer in patients who otherwise would not have benefited from surgery, and in local recurrences after radiation failure. Methods. Relevant information on HIFU treatment was identified through a literature search of published studies. RESULTS. High biochemical efficacy, excellent tumor local control and favorable mid- and long-term oncological data with a low morbidity rate have been shown in many series of patients. CONCLUSIONS. Although HIFU is a recent and emerging technology, it has been well studied and developed to a point that HIFU will undoubtedly be an effective alternative to radiation therapy.

  12. A State of the Art on the Technology for Recycling and Reuse of the Decommissioning Concrete Wastes

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Chung Hun; Choi, Wang Kyu; Min, Byung Youn; Oh, Won Zin; Lee, Kun Woo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2008-02-15

    This report describes the reduction and recycling technology of decommissioning concrete waste. Decontamination and decommissioning (D and D) becomes one of the most important nuclear markets especially in the developed countries including USA, UK and France where lots of the retired nuclear facilities have been waiting for decommissioning. In our country the KAERI has been carrying out the decommissioning of the retired TRIGA MARK II and III research reactors and an uranium conversion plant as the first national decommissioning project since 1998. One of the most important areas of the decommissioning is a management of a huge amount of a decommissioning waste the cost of which is more than half of the total decommissioning cost. Therefore reduction in decommissioning waste by a reuse or a recycle is an important subject of decommissioning technology development in the world. Recently much countries pay attention to recycle the large amount of concrete dismantling waste resulted from both a nuclear and a non nuclear industries. In our country, much attention was taken in a recycle of concrete dismantling waste as a concrete aggregate, but a little success has been resulted due to the disadvantages such as a weakness of hardness and surface mortar contamination. A recycle in nuclear industry and a self disposal of the radioactively contaminated concrete wastes are main directions of concrete wastes resulted from a nuclear facility decommissioning. In this report it was reviewed the state of art of the related technologies for a reduction and a recycle of concrete wastes from a nuclear decommissioning in the country and abroad. Prior to recycle and reuse in the nuclear sector, however, the regulatory criteria for the recycle and reuse of concrete waste should be established in parallel with the development of the recycling technology.

  13. Alabama's Education Coalition Focuses on Supporting the State's Math, Science and Technology Initiative and on Building Distance Learning Programs

    Science.gov (United States)

    Denson, R. L.

    2003-12-01

    The Alabama Math Science Technology Educational Coalition (AMSTEC) was formed as a non-profit after a 1998 NASA Linking Leaders program brought in education and corporate leaders to address systemic education reform in Alabama public schools. AMSTEC was instrumental in the creation of the Alabama Math Science Technology Initiative (AMSTI), a K-12 program designed using data from national and international research and local teacher survey. In the face of dwindling government support in a state ranked last in education funding, AMSTEC believes that its best hope for improved STEM education lies in strengthening its community/industry partnerships and building upon the Department of Education's newly created AMSTI program. NASA's GLOBE program is the primary earth science education component being integrated into AMSTI. AMSTI is structured to provide teachers with (1) the materials, equipment, technology and supplies necessary to deliver high quality, inquiry-based instruction; (2) professional development linked directly to the educational resources with the intent of strengthening content knowledge, instructional strategies, and use of assessment tools; and (3) on-site support and mentoring throughout the year in the interest of achieving these goals. Roles for community partners to support these objectives far exceed that of mere funding - especially in the area of mentoring and professional development. Currently, AMSTEC consists of 100+ members including classroom teachers and district officers, education department representatives from higher educational institutions, policy makers and administrators, and government and industry representatives. AMSTEC remains partially tied to NASA fiscally and is administratively housed by the National Space Science and Technology Center's Earth System Science Center. AMSTEC's partnership emphasis is focused on increasing corporate and industry participation to support the implementation of AMSTI and its hub

  14. Solid-State Lighting 2017 Suggested Research Topics Supplement: Technology and Market Context

    Energy Technology Data Exchange (ETDEWEB)

    None

    2017-09-29

    A 2017 update to the Solid-State Lighting R&D Plan that is divided into two documents. The first document describes a list of suggested SSL priority research topics and the second document provides context and background, including information drawn from technical, market, and economic studies. Widely referenced by industry and government both here and abroad, these documents reflect SSL stakeholder inputs on key R&D topics that will improve efficacy, reduce cost, remove barriers to adoption, and add value for LED and OLED lighting solutions over the next three to five years, and discuss those applications that drive and prioritize the specific R&D.

  15. Comparison of Advanced Residential Water Heating Technologies in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Maguire, Jeff [National Renewable Energy Lab. (NREL), Golden, CO (United States); Fang, Xia [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wilson, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-05-01

    In this study, gas storage, gas tankless, condensing, electric storage, heat pump, and solar water heaters were simulated in several different climates across the United States, installed in both conditioned and unconditioned space and subjected to several different draw profiles. While many pre-existing models were used, new models of condensing and heat pump water heaters were created specifically for this work. In each case modeled, the whole house was simulated along with the water heater to capture any interactions between the water heater and the space conditioning equipment.

  16. Risk of Ectopic Pregnancy Associated With Assisted Reproductive Technology in the United States, 2001–2011

    Science.gov (United States)

    Perkins, Kiran M.; Boulet, Sheree L.; Kissin, Dmitry M.; Jamieson, Denise J.

    2015-01-01

    OBJECTIVE To assess national trends in ectopic pregnancy incidence among assisted reproductive technology users and identify risk factors associated with ectopic pregnancy. METHODS We identified 553,577 pregnancies reported to the National ART Surveillance System between 2001 and 2011. Of those, 9,480 were ectopic, of which 485 were heterotopic. As a result of small numbers, ectopic and heterotopic pregnancies were combined for analysis. We assessed temporal trends in annual ectopic pregnancy rates using Poisson regression. We used log-binomial regression models with generalized estimating equations for correlated outcomes within clinics to calculate unadjusted and adjusted risk ratios for the association between ectopic pregnancy and selected patient characteristics and treatment factors. RESULTS The rate of ectopic pregnancy declined from 2.0% (n5735, 95% confidence interval [CI] 1.9–2.2) in 2001 to 1.6% (n=968, 95% CI 1.5–1.7) in 2011 (P for trend ,.001). The ectopic pregnancy rate ranged from 2.0% (n=7,469, 95% CI 1.9–2.0) for fresh, nondonor cycles to 1.0% (n=641, 95% CI 0.9–1.1) for fresh, donor cycles. Among fresh, nondonor cycles, the rate of ectopic pregnancy was 1.6% (95% CI 1.4–1.7) when one embryo was transferred compared with 1.7% (95% CI 1.7–1.8), 2.2% (95% CI 2.1–2.3), and 2.5% (95% CI 2.4–2.6) when two, three, or four or more embryos were transferred, respectively (adjusted risk ratios 1.11, 95% CI 0.94–0.30; 1.33, 95% CI 1.12–1.56; and 1.49, 95% CI 1.25–1.78). CONCLUSION Ectopic pregnancy incidence after assisted reproductive technology has decreased over time, but factors such as multiple embryo transfer increase the risk of ectopic pregnancy. PMID:25560107

  17. Progress of information technology in healthcare, current state, outlook toward future

    Directory of Open Access Journals (Sweden)

    Miroslav Dvořák

    2013-07-01

    Full Text Available Brief summary of reasons for development of Hospital Information Systems (HIS is described. We mention different concepts of HIS development. Primary negative attitude of physicians to the invasion of information technology to hospitals has been slowly changed. Extended teaching of fundamentals of computer science at medical universities is very important for a new generation of physicians. Modern methods of e‑learning allow using websites and medical atlases including presentations of surgical interventions in different branches of surgical medicine, physiotherapeutic methods, etc. Medical staff in hospitals may also profit from electronic tools used for education in medical informatics or for obligatory postgraduate courses. Software producing companies are obliged to teach potential users how to use implemented information systems effectively. E-learning is a good method how to teach new employees who need to start using the system. Telematics in health service and use of Internet data storages may be a trend in future development of information systems. Large amount of patient data in current databases is a big encouragement for expanded use of data mining and application of artificial intelligence methods in medical expert systems.

  18. Frame and edge seal technology: A state of the art survey

    Science.gov (United States)

    Thyholt, Marit; Andresen, Inger; Hugdal, Berit; Aschehoug, Oeyvind

    1994-04-01

    In windows, the glazing is traditionally mounted in an operable or fixed frame, made of wood, metal (steel or aluminum), or PVC. The glazing component in solar collectors and solar walls is also typically mounted in a frame. The purpose of the frame is to protect the vulnerable edge of the glazing and give structural stability, which is especially important in operable windows. Sealed multipane glazings are almost exclusively fabricated with a metal (aluminum or galvanized steel) spacer bar along the edges. New advanced glazings will require new types of frame and edge seal products. As the insulation properties of the glazing itself reach a performance close to that of well-insulated opaque walls, the thermal bridging caused by the spacer bars and the frames will be unacceptable, even for wooden windows. The new glazings will also integrate other functions, which again will influence the design of the frames. There are already quite a few new technological developments in this field. New materials and products for the edge seal and the frame are being developed, and computer calculations gradually take over the manual analysis and laboratory testing of new products. The objective of this IEA Task 18 Case Study is to investigate the influence of the frame and glazing edge seal on the total U-value of a glazing system, to develop improved test and calculation methods, and to design, construct, and test low thermal loss frames for use in advanced glazing applications.

  19. Biomass energy: State of the technology present obstacles and future potential

    Energy Technology Data Exchange (ETDEWEB)

    Dobson, L.

    1993-06-23

    The prevailing image of wood and waste burning as dirty and environmentally harmful is no longer valid. The use of biomass combustion for energy can solve many of our nation`s problems. Wood and other biomass residues that are now causing expensive disposal problems can be burned as cleanly and efficiently as natural gas, and at a fraction of the cost. New breakthroughs in integrated waste-to-energy systems, from fuel handling, combustion technology and control systems to heat transfer and power generation, have dramatically improved system costs, efficiencies, cleanliness of emissions, maintenance-free operation, and end-use applications. Increasing costs for fossil fuels and for waste disposal strict environmental regulations and changing political priorities have changed the economics and rules of the energy game. This report will describe the new rules, new playing fields and key players, in the hope that those who make our nation`s energy policy and those who play in the energy field will take biomass seriously and promote its use.

  20. Copper-containing ceramic precursor synthesis: Solid-state transformations and materials technology

    Science.gov (United States)

    Hepp, Aloysius F.; Eckles, William E.; Duraj, Stan A.; Andras, Maria T.; Fanwick, Phillip E.; Richman, Robert M.; Sabat, Michael L.; Power, Michael B.; Gordon, Edward M.; Barron, Andrew

    1994-01-01

    Three copper systems with relevance to materials technology are discussed. In the first, a CuS precursor, Cu4S1O (4-methylpyridine)(sub 4)- (4-MePy), was prepared by three routes: reaction of Cu2S, reaction of CuBr-SMe2, and oxidation of copper powder with excess sulfur in 4-methylpyridine by sulfur. In the second, copper powder was found to react with excess thiourea (H2NC(S)NH2) in 4-methylpyridine to produce thiocyanate (NCS(-)) complexes. Three isolated and characterized compounds are: Cu(NCS)(4-MePy)(sub 2), a polymer, (4-MePy-H)(Cu(NCS)(sub 3)(4-MePy)(sub 2)), a salt, and t-Cu(NCS)(sub 2)(4-MePy)(sub 4). Finally, an attempt to produce a mixed-metal sulfide precursor of Cu and Ga in N-methylimidazole (N-MeIm) resulted in the synthesis of a Cu-containing polymer, Cu(SO4)(N-MeIm). The structures are presented; the chemistry will be briefly discussed in the context of preparation and processing of copper-containing materials for aerospace applications.

  1. [State of the art and future trends in technology for computed tomography dose reduction].

    Science.gov (United States)

    Calzado Cantera, A; Hernández-Girón, I; Salvadó Artells, M; Rodríguez González, R

    2013-12-01

    The introduction of helical and multislice acquisitions in CT scanners together with decreased image reconstruction times has had a tremendous impact on radiological practice. Technological developments in the last 10 to 12 years have enabled very high quality images to be obtained in a very short time. Improved image quality has led to an increase in the number of indications for CT. In parallel to this development, radiation exposure in patients has increased considerably. Concern about the potential health risks posed by CT imaging, reflected in diverse initiatives and actions by official organs and scientific societies, has prompted the search for ways to reduce radiation exposure in patients without compromising diagnostic efficacy. To this end, good practice guidelines have been established, special applications have been developed for scanners, and research has been undertaken to optimize the clinical use of CT. Noteworthy technical developments incorporated in scanners include the different modes of X-ray tube current modulation, automatic selection of voltage settings, selective organ protection, adaptive collimation, and iterative reconstruction. The appropriate use of these tools to reduce radiation doses requires thorough knowledge of how they work. Copyright © 2013 SERAM. Published by Elsevier Espana. All rights reserved.

  2. Humanitarian Demining: Reality and the Challenge of Technology - The State of the Arts

    Directory of Open Access Journals (Sweden)

    Maki K. Habib

    2008-11-01

    Full Text Available In the context of humanitarian demining it is essential to have a reliable and accurate sensor or an integration of heterogeneous/homogeneous sensors with efficient and reliable data fusion and processing techniques. In addition, it is necessary to overcome the constrain on the resources to speed up the demining process in terms of time, cost, and safety enhancement of personnel and operation. A portable handheld mine detection approach to sensor movement is slow and hazardous for individual deminers. Armored vehicles may not thoroughly protect the occupants and may be of only limited usefulness in off-road operations. Robotized solutions with effective sensing capabilities properly sized with suitable modularized mechanized structure and well adapted to local conditions of minefields can greatly improve the safety of personnel as well as work efficiency and flexibility. Such intelligent and flexible machines can speed the clearance and perform verifying processes when used in combination with handheld mine detection tools. Furthermore, the use of many robots working and coordinating their movement will improve the productivity of the overall mine detection process through the use of team cooperation and coordination. This paper evaluates the available mine clearance technologies and disscusses their development efforts and limitations to automate tasks related to demining process.In addition, it introduces technical features and design capabilities of a mobile platform needed to accelerate the demining process and achieve safety with cost effective measures.

  3. Recent trend and future of mashy-state/semi-solid metal processing technology. Hanyoyuter dot hangyoko kako gijutsu no genjo to shorai

    Energy Technology Data Exchange (ETDEWEB)

    Kiuchi, M. (The Univ. Of Tokyo, Tokyo (Japan). Inst. of Industrial Science)

    1990-06-01

    The recent trend and the future forecast of the research and development concerning the processing technology of mashy-state / semi-solid metal are explained. This technology is classified into three kinds of fundamental technology, namely the manufacturing, storage / transfer, and forming. As for the manufacturing technology, the research in homogeneous heating, heating and stirring, and rheocasting method et al. is being carried out. As for the forming technology, the development of mashy-state rolling, forging, extruding, and die-casting is being carried out. The application to manufacturing of composite material is also being tried. The mashy-state / semi-solid processing technology is expected with hopeful feasibility to manufacture some metallic material having new functions which can not be obtained by the usual processing, and also from viewpoints of high-quality, energy-saving et al. In order to make these technologies practicable, however, many kinds of research and development are required, such as quickiy heating and cooling, liquid / solid fluid controlling, heat resistant tool material et al. as well as the element technologies needed individually. 3 refs., 17 figs.

  4. Technology Policy Survey: A Study of State Policies Supporting the Use of Calculators and Computers in the Study of Precollege Mathematics.

    Science.gov (United States)

    Kansky, Bob

    The Technology Advisory Committee of the National Council of Teachers of Mathematics recently conducted a survey to assess the status of state-level policies affecting the use of calculators and computers in the teaching of mathematics in grades K-12. The committee determined that state-level actions related to the increased availability of…

  5. Digital equity in education: A Multilevel examination of differences in and relationships between computer access, computer use and state-level technology policies.

    Directory of Open Access Journals (Sweden)

    Jonathan D. Becker

    2007-02-01

    Full Text Available Using data from the National Assessment of Educational Progress (NAEP state assessment and a survey of state-level technology policies, this study examined digital equity in education as a multilevel organizational phenomenon with data from 70,382 students in 3,479 schools and 40 states. Students in rural schools or schools with higher percentages of African American students were likely to have less access to computers. With respect to computer use, girls and students eligible for free or reduced-price lunch were more likely to use computers more frequently when computers are available in the classroom. With respect to relationships between computer access and computer use, having computers available in a lab increases the likelihood of higher levels of computer use. The results suggested that no more than 5% of the variance in computer access can be attributed to state factors, and less than 1% of the variance in computer use was between states. The findings suggested that where student technology standards are integrated into subject-area standards, computer use was likely lower than in other states. In states where pre-service teachers must meet technology-related requirements to receive their teaching credential and states where funds earmarked for technology are distributed as competitive grants, computer use was likely to be higher.

  6. Governing new technology: A comparative analysis of government support for nanotechnology in the Netherlands and the United States

    Science.gov (United States)

    Eijmberts, Johannes

    This study examines this variance in national government support for nanotechnology---its shape, size, and policy priorities---by comparing the United States and the Netherlands. Our operating hypothesis is that national government support for nanotechnology development is driven not by the intrinsic nature of the technology but by longstanding structural and institutional arrangements. That is, in the U.S., pluralist political traditions and reliance on classical liberal market economics would suggest a detached national government approach, leaving any initiative to market actors. At the same time, legacies of corporatism in the Dutch political system and a tradition of greater direct government involvement in the national economy would suggest a government-led policy on nanotechnology development. The findings show otherwise. Early on, the U.S. government established the National Nanotechnology Initiative, an overarching federal mechanism to promote and coordinate nanotechnology development. Yet, despite its appearance of central direction and coordination, the NNI reflected pluralist arrangements by leaving ample autonomy for participating federal departments and agencies. The creation of the NNI was driven particularly by concerns of about foreign challenges to American global leadership in science and technology. In the Netherlands, by contrast, the path taken shows the legacy of Dutch corporatist practice---slow, incremental, and embedded in pre-existing institutional arrangements. The Dutch government initially took no directive role, relying instead on established links among universities, public research funding organizations, and industries to advance nanotechnology development in the Netherlands. However, over time, Dutch government involvement in nanotechnology grew to be more supportive, sizeable, comprehensive, and directive---particulary by requiring substantial investments in risk-related research as a condition for public funding and, notably, by

  7. Particle beam technology for control of atomic-bonding state in materials

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, Junzo [Kyoto Univ. (Japan). Faculty of Engineering

    1997-03-01

    The atomic-bonding state in materials can be controlled through `kinetic bonding` process by energetic particle beams which have a sufficient atomic kinetic energy. In order to clarify the `kinetic bonding` process the negative-ion beam deposition is considered as an ideal method because the negative ion has no additional active energies. Sputter type heavy negative-ion sources can be used for this purpose. Carbon films prepared by carbon negative-ion beam deposition have a strong dependency of the film properties on ion beam kinetic energy and have a quite high thermal conductivity which is comparable to that of the IIb diamond at a kinetic energy of 50-100 eV/atom. It suggests that new or metastable materials could be formed through the `kinetic bonding` process. Negative-ion beams can also be used for ion implantation, in which charging problems are perfectly reduced. (author)

  8. State of the Art of HVAC Technology in Europe and America

    DEFF Research Database (Denmark)

    Olesen, Bjarne W.; Kazanci, Ongun Berk

    2015-01-01

    for increasing the energy efficiency of HVAC (heating, ventilation and air-conditioning) systems and for increasing the amount of renewable energy used. Especially these types of systems are getting increasing attention in Europe and North-America. In the present study, operation characteristics, possibilities...... mechanisms and media to emit and remove heat or moisture from indoor spaces (e.g. hydronic radiant heating and cooling systems, fan-coil units, and active beams). The main differences between HVAC systems in Europe, North America and other parts of the world are often the indoor terminal units. Type...... of energy sources and energy generators are very much similar. This paper will present state-of the art-off energy efficient systems that will provide a good indoor environmental quality at a decreased energy use. Low Temperature Heating and High Temperature Cooling systems are an important requirement...

  9. Q-band 4-state phase shifter in planar technology: Circuit design and performance analysis

    Science.gov (United States)

    Villa, E.; Cagigas, J.; Aja, B.; de la Fuente, L.; Artal, E.

    2016-09-01

    A 30% bandwidth phase shifter with four phase states is designed to be integrated in a radio astronomy receiver. The circuit has two 90° out-of-phase microwave phase-shifting branches which are combined by Wilkinson power dividers. Each branch is composed of a 180° phase shifter and a band-pass filter. The 180° phase shifter is made of cascaded hybrid rings with microwave PIN diodes as switching devices. The 90° phase shift is achieved with the two band-pass filters. Experimental characterization has shown significant results, with average phase shift values of -90.7°, -181.7°, and 88.5° within the operation band, 35-47 GHz, and mean insertion loss of 7.4 dB. The performance of its integration in a polarimetric receiver for radio astronomy is analyzed, which validates the use of the presented phase shifter in such type of receiver.

  10. SCHEME LINKING OF TECHNOLOGY UNIVERSITIES OF THE STATE OF PUEBLA IN THE TRAINING OF STUDENTS

    Directory of Open Access Journals (Sweden)

    Claudia Esther López-Parada

    2014-01-01

    Full Text Available This article aims to analyze the relationship that is developed in Universidad Tecnológica de Huejotzingo (UTH in the state of Puebla with the social and productive sectors, in the training of professionals in the areas of administration and evaluation of productive projects. The work was conducted through a literature review, interviews with the directors of university extension area and participant observation. The results indicate that Universidad Tecnológica de Huejotzingo has programs in connection with the social and productive sectors, such as processing enterprises which has allowed the participation of students in these spaces for performing professional stay in business these spaces have improved their academic knowledge and practice their skills.

  11. Solid anaerobic digestion: State-of-art, scientific and technological hurdles.

    Science.gov (United States)

    André, Laura; Pauss, André; Ribeiro, Thierry

    2017-09-05

    In this paper, a state-of-art about solid anaerobic digestion (AD), focused on recent progress and trends of research is proposed. Solid anaerobic digestion should be the most appropriate process for degradation of by-products with high total solid (TS) content, especially lignocellulosic materials like agricultural waste (straw, manure), household waste and food waste. Solid AD is already widely used in waste water treatment plant for treating plant for sewage sludge but could be more developed for lignocellulosic materials with high TS content. Many research works were carried out in Europe on solid AD, focused on current hurdles (BMP, codigestion, inhibition, microbial population, rheology, water transfers, inoculum, etc.) in order to optimize the solid AD process. In conclusion, hurdles of solid AD process should and must be solved in order to propose better productivity and profitability of such system operating with high TS content (>15%), favouring reliable industrial processes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Effects of Instructional Performance of National Open University Undergraduates in Educational Technology in Kwara State, Nigeria

    Directory of Open Access Journals (Sweden)

    A.I. Gambari

    2017-06-01

    Full Text Available Screencast is a digital video and audio recording of what occurs on a presenter's computer screen which gives learners the chance to control the pace at which they learn; thereby influencing their academic performance positively. Despite these benefits of screencast in enhancing teaching and learning in distance learning programmes, they are being adopted in Nigerian higher institutions. The research adopted the mix-method approach, using quantitative and qualitative data analyses with 50 undergraduates forming the sample for the study. Two research instruments were used to gather data in the study, namely Educational Technology Achievement Test and Screencast Attitude Questionnaire. The former was tested using split-half reliability statistics and yielded a value of 0.727, while the latter was subjected to Cronbach’s Alpha reliability statistics and yielded a value of 0.662. The research questions were answered using mean while research hypotheses 1-3 were tested using AN-COVA. Findings of this study showed that: (i there was significant difference in the performance of the experimental and the control group in favor of the experimental group; (ii there was no significant difference in the mean score performance of male and female undergraduates exposed to screencast; (iii the undergraduates that were exposed to screencast had positive attitudes toward the use of podcast; (iv there was significant difference in the retention-test performance of the experimental and the control group in favour of the exper-imental group. Based on the findings, it was recommended that courseware developers should develop and utilize screencast to supplement course materi-als.

  13. Technology diffusion of anesthesia information management systems into academic anesthesia departments in the United States.

    Science.gov (United States)

    Stol, Ilana S; Ehrenfeld, Jesse M; Epstein, Richard H

    2014-03-01

    Anesthesia information management systems (AIMS) are electronic health records that automatically import vital signs from patient monitors and allow for computer-assisted creation of the anesthesia record. When most recently surveyed in 2007, it was estimated that at least 16% of U.S. academic hospitals (i.e., with an anesthesia residency program) had installed an AIMS. At least an additional 28% reported that they were in the process of implementing, or searching for an AIMS. In this study, we updated the adoption figures as of May 2013 and examined the historical trend of AIMS deployment in U.S. anesthesia residency programs from the perspective of the theory of diffusion of technologic innovations. Questionnaires were sent by e-mail to program directors or their identified contact individuals at the 130 U.S. anesthesiology residency programs accredited as of June 30, 2012 by the Accreditation Council for Graduate Medical Education. The questionnaires asked whether the department had an AIMS, the year of installation, and, if not present, whether there were plans to install an AIMS within the next 12 months. Follow-up e-mails and phone calls were made until responses were obtained from all programs. Results were collected between February and May 2013. Implementation percentages were determined using the number of accredited anesthesia residency programs at the start of each academic year between 1987 and 2013 and were fit to a logistic regression curve using data through 2012. Responses were received from all 130 programs. Eighty-seven (67%) reported that they currently are using an AIMS. Ten programs without a current AIMS responded that they would be installing an AIMS within 12 months of the survey. The rate of AIMS adoption by year was well fit by a logistic regression curve (P = 0.90). By the end of 2014, approximately 75% of U.S. academic anesthesiology departments will be using an AIMS, with 84% adoption expected between 2018 and 2020. Historical adoption

  14. An Analysis of Information Technology Adoption by IRBs of Large Academic Medical Centers in the United States.

    Science.gov (United States)

    He, Shan; Botkin, Jeffrey R; Hurdle, John F

    2015-02-01

    The clinical research landscape has changed dramatically in recent years in terms of both volume and complexity. This poses new challenges for Institutional Review Boards' (IRBs) review efficiency and quality, especially at large academic medical centers. This article discusses the technical facets of IRB modernization. We analyzed the information technology used by IRBs in large academic institutions across the United States. We found that large academic medical centers have a high electronic IRB adoption rate; however, the capabilities of electronic IRB systems vary greatly. We discuss potential use-cases of a fully exploited electronic IRB system that promise to streamline the clinical research work flow. The key to that approach utilizes a structured and standardized information model for the IRB application.

  15. Methane Post-Processor Development to Increase Oxygen Recovery beyond State-of-the-Art Carbon Dioxide Reduction Technology

    Science.gov (United States)

    Abney, Morgan B.; Greenwood, Zachary; Miller, Lee A.; Alvarez, Giraldo; Iannantuono, Michelle; Jones, Kenny

    2013-01-01

    State-of-the-art life support carbon dioxide (CO2) reduction technology, based on the Sabatier reaction, is theoretically capable of 50% recovery of oxygen from metabolic CO2. This recovery is constrained by the limited availability of reactant hydrogen. Post-processing of the methane byproduct from the Sabatier reactor results in hydrogen recycle and a subsequent increase in oxygen recovery. For this purpose, a Methane Post-Processor Assembly containing three sub-systems has been developed and tested. The assembly includes a Methane Purification Assembly (MePA) to remove residual CO2 and water vapor from the Sabatier product stream, a Plasma Pyrolysis Assembly (PPA) to partially pyrolyze methane into hydrogen and acetylene, and an Acetylene Separation Assembly (ASepA) to purify the hydrogen product for recycle. The results of partially integrated testing of the sub-systems are reported

  16. Analysis on the revision of the United States authorizing procedure for the transfer of unclassified nuclear technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Sung-ho; Seo, Hana; Lee, Chansuh; Kim, Jong-sook [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2015-10-15

    The DOE (Department Of Energy) has not comprehensively update 10CFR810 since 1986. Since then, the global civil nuclear market has expanded, particularly in China, the Middle East, and Eastern Europe, with vendors from France, Japan, the Republic of Korea, Russia, and Canada. In result, DOE issued revised 810 in respond to comments received from the public and commercial nuclear market changes. This regulation revision improves the efficiency of authorization process to promote national nuclear industry while maintaining nonproliferation control. Even though ROK has initiated a legal basis for Intangible technology transfer (ITT) for nuclear export control, working implementation system is not set up. This research proposes recommendable ITT implementation of the ROK according to the analysis result of the US regulation. In this revision, of 124 countries had been classified as general authorization under 10CFR810, 80 countries reclassified into the specific authorization. By remaining 'fast track' for specific authorization, in particular, time frames for internal DOE and interagency reviews are reduced. This means the US government actively copes with commercial nuclear market expands to promote their industry. Meanwhile, by remaining some of nuclear-weapon states (China, Russia, India) as specific authorization maintaining that the determinations are consistent with current US national security, diplomatic, and trade policy. By benchmarking the US regulation, Korea can improve the efficiency of the technology transfer authorization process easing the regulatory burden by reducing uncertainty and timelines while maintaining the highest level of nonproliferation control.

  17. The Integration of Technology and Management in the Competitiveness of the United States Short Staple Yarn Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Suvalee T. Tangboonritruthai

    2014-01-01

    Full Text Available The purpose of this research was to investigate whether a balance of technology and management could be used in order to sustain a viable United States (US short staple yarn production industry. The methodology used in this study consisted of primary research comprising two phases. The first phase consisted of interviews with industry executives in order to find out what US yarn manufacturers think are the important factors in maintaining a competitive yarn industry. The second phase was an online survey with industry customers in order to find out why weavers and knitters buy from US manufacturers. Results reveal that US manufacturers have competitive advantages over other countries because of skill level of workforce, variety of products offered, customer relationships, innovation and technology, and product quality. In order to keep these competitive advantages, “technology” and “management” strategies should be implemented. Results also reveal the areas in which the US yarn manufacturers should focus their resources in order to stay competitive or indeed survive.

  18. Comparative Analysis of the Consumer Protection, Considering the Globalisation and Technological Changes, within Member States of the European Union

    Directory of Open Access Journals (Sweden)

    Iulian Viorel Braşoveanu

    2014-05-01

    Full Text Available Recent globalization and technological changes have produced significant changes in consumption patterns, shopping online becoming increasingly more important. Under these conditions, in this article we analyze the most important issues relating to the level and quality of consumer protection in the European Union countries for the period 2008-2012 . In this article we aimed to analyze the most important issues related to the level and quality of consumer protection in European Union 27 countries in the period 2008-2012. For this scope, we have chosen the most important five consumer indicators, which are the components of the Consumer Conditions Index, which provide information on both the level and the quality of consumer protection: the protection perceived by consumers (feeling protected as a consumer, illicit commercial practices, the product safety, the consumer complaints, and the redress measures. Initial data were collected from the European Commission for each Member State of the European Union 27, for the last five years, from 2008 to 2012. We have used statistical and econometric methods. For the year 2012, using the selected indicators, we have presented the descriptive statistics in order to observe their caracteristics, we have analysed the correlation matrix and we have determined the structure of four clusters, which reveals common features of countries in each cluster. In order to capture the impact of the variables illegal commercial practices and redress measures on the dependent variable protection perceived by the consumers, we have realized panel regressions with cross-section fixed effects, using data for the period 2008-2012. Also for this period, comparative statistical analyzes were performed (average, minimum, maximum, trend between Member States. The results reflect the correlations between the analyzed indicators during the period 2008-2012, and a comprehensive scan of how these indicators developed in territorial

  19. Lecture capture: enhancing learning through technology at the Kent State University College of Podiatric Medicine.

    Science.gov (United States)

    DiBacco, Priscilla M; Hetherington, Vincent J; Putman, David

    2012-01-01

    The intent of this research was to evaluate the Mediasite lecture capture system at the Kent State University College of Podiatric Medicine (formerly the Ohio College of Podiatric Medicine) to determine the acceptance, use and benefits to both students and faculty and to identify any concerns, limitations, and suggestions for expansion. There is extreme debate on the effect of lecture capture on student attendance included in the research. Two surveys were compiled, one each for students and faculty. These were distributed by email to the entire student body and all full-time and part-time faculty. Responses were voluntary. The questions sought to identify the priorities of the participant, reasons for viewing lectures compiled by course, to assess any effect on class attendance and to evaluate the ease and use of the technical function. There was also a section for subjective responses and suggestions. The tabulations proved a very high use of the program with the most important reason being to prepare for exams. The question of class attendance is still open to interpretation. Technically, the Mediasite system was ranked easy to use by both groups. The results of this survey confirm the concept of lecture capture as an integral segment of advanced education. Though this system should not replace class attendance, it is a vital supplement to course work and study. By reviewing all of the components of the survey those who may have concerns on its effectiveness are also aware of the advantages. The results of this study met all the objectives to evaluate use and obtain viewpoints to improve and expand the program.

  20. Barriers to the diffusion of renewable energy technologies - A case study of the state of Maharashtra, India

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, B.S. [Indira Gandhi Inst. of Development Research, Mumbai (India)

    2001-07-01

    India's expanding economy and the strong growth expected in the next few decades (at around 10% per annum), will require additional energy. The use of fossil fuels is likely to dominate the strategy for meeting these needs in the near and medium term. However, India's own reserves are finite and will only be available for a limited period and the use of fossil fuels is not sustainable and is directly linked to environmental problems, particularly CO{sub 2} emissions and climate change. The importance of the increasing use of renewable energy sources was recognized in India in the early 1970s. During the past quarter century, a significant effort has gone into the development, trial and induction of a variety of technologies for use in different sectors. Today, India has one of the world's largest programs for renewable energy. The activities cower all the major renewable energy sources, including biogas, biomass, solar, wind and small-hydro power and other emerging technologies. By the end of 20th century nearly three million family-sized biogas plants (second in number in the world and next only to China's) and 30 million improved wood stoves have been established. These technologies could save about 15 million tons of fuel wood every year. Several other renewable energy technologies and products are now commercially available, and are economically viable in comparison to fossil fuels for some applications. However, there are many barriers to achieve the full potential of the renewable energy technologies. In order to study the potential and evaluate different RETs, we carried out a study of barriers to RETs in the state of Maharashtra, which accounts for about 16% of the Gross Domestic Product and 17% of the electricity supply in India. The study has been carried out in two parts. In the first part analysis was done on two technologies, viz., solar and wind. For doing this, information was collected from various secondary sources such as

  1. Barriers to the diffusion of renewable energy technologies - A case study of the state of Maharashtra, India

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, B.S. [Indira Gandhi Inst. of Development Research, Mumbai (India)

    2001-07-01

    India's expanding economy and the strong growth expected in the next few decades (at around 10% per annum), will require additional energy. The use of fossil fuels is likely to dominate the strategy for meeting these needs in the near and medium term. However, India's own reserves are finite and will only be available for a limited period and the use of fossil fuels is not sustainable and is directly linked to environmental problems, particularly CO{sub 2} emissions and climate change. The importance of the increasing use of renewable energy sources was recognized in India in the early 1970s. During the past quarter century, a significant effort has gone into the development, trial and induction of a variety of technologies for use in different sectors. Today, India has one of the world's largest programs for renewable energy. The activities cower all the major renewable energy sources, including biogas, biomass, solar, wind and small-hydro power and other emerging technologies. By the end of 20th century nearly three million family-sized biogas plants (second in number in the world and next only to China's) and 30 million improved wood stoves have been established. These technologies could save about 15 million tons of fuel wood every year. Several other renewable energy technologies and products are now commercially available, and are economically viable in comparison to fossil fuels for some applications. However, there are many barriers to achieve the full potential of the renewable energy technologies. In order to study the potential and evaluate different RETs, we carried out a study of barriers to RETs in the state of Maharashtra, which accounts for about 16% of the Gross Domestic Product and 17% of the electricity supply in India. The study has been carried out in two parts. In the first part analysis was done on two technologies, viz., solar and wind. For doing this, information was collected from various secondary sources such as

  2. Study of the technological production at the State University of Londrina (UEL: mapping the area of Agricultural Sciences by Platform Lattes

    Directory of Open Access Journals (Sweden)

    Natan Tiago Batista Serzedello

    2011-06-01

    Full Text Available Introduction: Technological products and processes employed to solve society’s practical problems comprise technological production, which is the essential means to measure the technological development of the environment in which the institution is inserted. This research aimed to verify the State University of Londrina’s (UEL technological production in the field of Agro-Sciences. Method: The methodological approach was to identify and analyze technological production through the curricula of the 51 professors granted with scholarships by UEL’s  Scientific Initiation Program (PROIC available at the Lattes Platform. The data collected for analysis was charted and categorized according to technological production typology. Results: Of the 65 registered items in the researchers´curricula lattes refer to the technological production. Those items were mapped in order to describe the types identified. It was observed that the most innovative specialties are Agronomy, Forestry and Forest Engineering, Agricultural Engineering, Animal Science, Veterinary Medicine, Fisheries Resources and Fishing Engineering, Science and Food Technology. Conclusions: The production  resulting from research activities of technological development, has spread through the production literature, primarily journal articles. Researchers build partnerships in the same Department, or with others within and outside the University, interacting and sharing experiences, knowledge and equipment. This practice improves a technological production that is more likely to be successful. A considerable percentage of articles are published in Open Archives Initiative(OAI journals, allowing free access and encourages the dissemination of research results.

  3. Chaos control of the micro-electro-mechanical resonator by using adaptive dynamic surface technology with extended state observer

    Directory of Open Access Journals (Sweden)

    Shaohua Luo

    2016-04-01

    Full Text Available This paper addresses chaos control of the micro-electro- mechanical resonator by using adaptive dynamic surface technology with extended state observer. To reveal the mechanism of the micro- electro-mechanical resonator, the phase diagrams and corresponding time histories are given to research the nonlinear dynamics and chaotic behavior, and Homoclinic and heteroclinic chaos which relate closely with the appearance of chaos are presented based on the potential function. To eliminate the effect of chaos, an adaptive dynamic surface control scheme with extended state observer is designed to convert random motion into regular motion without precise system model parameters and measured variables. Putting tracking differentiator into chaos controller solves the ‘explosion of complexity’ of backstepping and poor precision of the first-order filters. Meanwhile, to obtain high performance, a neural network with adaptive law is employed to approximate unknown nonlinear function in the process of controller design. The boundedness of all the signals of the closed-loop system is proved in theoretical analysis. Finally, numerical simulations are executed and extensive results illustrate effectiveness and robustness of the proposed scheme.

  4. Chaos control of the micro-electro-mechanical resonator by using adaptive dynamic surface technology with extended state observer

    Science.gov (United States)

    Luo, Shaohua; Sun, Quanping; Cheng, Wei

    2016-04-01

    This paper addresses chaos control of the micro-electro- mechanical resonator by using adaptive dynamic surface technology with extended state observer. To reveal the mechanism of the micro- electro-mechanical resonator, the phase diagrams and corresponding time histories are given to research the nonlinear dynamics and chaotic behavior, and Homoclinic and heteroclinic chaos which relate closely with the appearance of chaos are presented based on the potential function. To eliminate the effect of chaos, an adaptive dynamic surface control scheme with extended state observer is designed to convert random motion into regular motion without precise system model parameters and measured variables. Putting tracking differentiator into chaos controller solves the `explosion of complexity' of backstepping and poor precision of the first-order filters. Meanwhile, to obtain high performance, a neural network with adaptive law is employed to approximate unknown nonlinear function in the process of controller design. The boundedness of all the signals of the closed-loop system is proved in theoretical analysis. Finally, numerical simulations are executed and extensive results illustrate effectiveness and robustness of the proposed scheme.

  5. Critical factors for bioenergy technology implementation. Five case studies of bioenergy markets in the United States, Sweden and Austria

    Energy Technology Data Exchange (ETDEWEB)

    Roos, Anders [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Forest-Industry-Market Studies

    1998-07-01

    This report analyses the driving forces of, and barriers to, biomass energy technology implementation with the objective of defining the most important factors behind the growth of bioenergy markets and suggesting strategies for policy makers and investors. The approach is to describe the important factors for the development of real bioenergy markets at two levels: (1) Institutional, primarily policy, and (2) market structure. Concepts from economic theory, primarily transaction cost theory and industrial organisation, are used in a qualitative way. The report is based on literature studies and field studies of bioenergy markets in three countries: the United States of America, Austria, and Sweden. It is divided into five sections. After the introduction in section one, literature with relevance for this study is reviewed in section two. In section three the energy policy and energy sectors of each country are described. The descriptions include an overview of the biomass energy sectors. Five cases of developed bioenergy markets in the three countries are presented in section four. The cases are residential heating with wood pellets in New Hampshire, United States, biomass power production in Maine, residential heating with pellets in Sweden, biomass district heating in Sweden, and biomass district heating in Austria. All markets are described in terms of the historical development, technical issues, economics, market structure and local policy influences. In the discussion in section five a number of key factors behind the success or failure of bioenergy are presented. Six factors are most important: (1) Complementaries between the bioenergy operations and another activity (for instance when the bioenergy production uses biomass waste products from another industry); (2) economics of scale within the bioenergy business through larger production series, standards, specialization etc.; (3) a competitive bioenergy market (Many sellers and buyers operate in the

  6. DOE/SOUTF/KEURP Kansas State University, Pushing technology to satisfy real world applications. First quarter report, July 1--September 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Hague, J.R.

    1993-10-01

    K-State has concluded the first quarter of the third year, demonstrating and evaluating electric vehicle technology. The G-Van has failed to operate during this period. Although plans are being made to install new batteries in the G-Van, the vehicle has little to prove or demonstrate in the way of advanced technologies. As such, there was an agreement by the Site Operator Users Task Force that no additional federal funding would be spent to maintain or operate the G-Vans. The DSEP van, received from DOE during the latter part of January remains idle. The DSEP vehicle may never be refurbished and used in the Site Operator Program as an operational vehicle. It may be used as a lab vehicle or in a special projects capacity. The cost of operating or maintaining this one-of-a-kind vehicle is high and the value of the vehicle to the program is questionable. Kansas State University is using and pleased with its first Soleq`s EVcort. The vehicle has been used on a routine basis around campus, at the Nebraska State Fair, the Kansas State Fair, and other specific functions. The vehicle continues to operate in an efficient manner, is well received by the public, and clearly demonstrates what is possible in EV technology. Professor Hague continued to serve as the Chairman of the Site Operator Users Task Force. As such, K-State is involved at all levels in promoting electric vehicle legislation and technology. The electric vehicle technology continues to be debated and discussed at all levels of government. The next year should bring incremental improvements for funding. The SOUTF has established an effort to ``push`` the EV technology forward with the development of a common specification to be used in the purchase of electric vehicles during the next year.

  7. DEVELOPMENT OF THEORY AND METHODS OF USE OF INFORMATION AND COMMUNICATION TECHNOLOGIES IN TEACHING MATHEMATICS OF ENGINEERING SPECIALITIES STUDENTS IN THE UNITED STATES

    OpenAIRE

    Nataliia M. Kiianovska; Natalia V. Rashevska; Serhii O. Semerikov

    2014-01-01

    The article deals with the problems of information and communication technologies (ICT) development in teaching mathematics of engineering specialities students in the United States. In the article the nature of trends of convergence of information system in higher technical education and other tendencies in the USA are сharacterized. The main historical stages of development of the theory and methods of ICT use in teaching mathematics of engineering specialities students in the United States...

  8. Biomass gasification with CHP production: A review of state of the art technology and near future perspectives

    Directory of Open Access Journals (Sweden)

    Jankes Goran G.

    2012-01-01

    Full Text Available This paper is a review of the state of the art of biomass gasification and the future of using biomass in Serbia and it presents researches within the project “The Development of a CHP Plant with Biomass Gasification”. The concept of downdraft demonstration unit coupled with gas engine is adopted. Downdraft fixed-bed gasification is generally favored for CHP, owing to the simple and reliable gasifiers and low content of tar and dust in produced gas. The composition and quantity of gas and the amount of air are defined by modeling biomass residues gasification process. The gas (290-400m3/h for 0.5- 0.7MW biomass input obtained by gasification at 800oC with air at atmospheric pressure contains 14% H2, 27% CO, 9% CO2, 2% CH4, and 48% N2, and its net heating value is 4.8-6 MJ/Nm3. The expected gasifier efficiency is up to 80%. The review of the work on biomass gasification has shown that the development of technology has reached the mature stage. There are CHP plants with biomass gasification operating as demonstration plants and several gasification demonstration units are successfully oriented to biofuel production. No attempt has been made here to address the economic feasibility of the system. Economics will be the part of a later work as firmer data are acquired.

  9. Assistive Technology Needs, Functional Difficulties, and Services Utilization and Coordination of Children with Developmental Disabilities in the United States.

    Science.gov (United States)

    Lin, Sue C; Gold, Robert S

    2017-01-31

    Assistive technology (AT) enhances the ability of individuals with disabilities to be fully engaged in activities at home, at school, and within their communities-especially for children with developmental disabilities (DD) with physical, sensory, learning, and/or communication impairments. The prevalence of children with DD in the United States has risen from 12.84% in 1997 to 15.04% in 2008. Thus, it is important to monitor the status of their AT needs, functional difficulties, services utilization, and coordination. Using data from the 2009-2010 National Survey on Children with Special Health Care Needs (NS-CSHCN), we conducted bivariate and multivariate statistical analysis, which found that 90% or more of parents of both children with DD and other CSHCN reported that their child's AT needs were met for vision, hearing, mobility, communication, and durable medical equipment; furthermore, children with DD had lower odds of AT needs met for vision and hearing and increased odds for meeting AT needs in mobility and communication. Our findings outline the current AT needs of children with DD nationally. Fulfilling these needs has the potential to engender positive lifelong effects on the child's disabilities, sense of independence, self-confidence, and productivity.

  10. Drive-train dynamics technology - State-of-the-art and design of a test facility for advanced development

    Science.gov (United States)

    Badgley, R. H.; Fleming, D. P.; Smalley, A. J.

    1975-01-01

    A program for the development and verification of drive-train dynamic technology is described along with its basis and the results expected from it. A central feature of this program is a drive-train test facility designed for the testing and development of advanced drive-train components, including shaft systems, dampers, and couplings. Previous efforts in designing flexible dynamic drive-train systems are reviewed, and the present state of the art is briefly summarized. The design of the test facility is discussed with major attention given to the formulation of the test-rig concept, dynamic scaling of model shafts, and the specification of design parameters. Specific efforts envisioned for the test facility are briefly noted, including evaluations of supercritical test shafts, stability thresholds for various sources and types of instabilities that can exist in shaft systems, effects of structural flexibility on the dynamic performance of dampers, and methods for vibration control in two-level and three-level flexible shaft systems.

  11. Capturing Nanotechnology's Current State of Development via Analysis of Patents. OECD Science, Technology and Industry Working Papers, 2007/4

    Science.gov (United States)

    Igami, Masatsura; Okazaki, Teruo

    2007-01-01

    This analysis aims at capturing current inventive activities in nanotechnologies based on the analysis of patent applications to the European Patent Office (EPO). Reported findings include: (1) Nanotechnology is a multifaceted technology, currently consisting of a set of technologies on the nanometre scale rather than a single technological field;…

  12. Technology-Aided Leisure and Communication Opportunities for Two Post-Coma Persons Emerged from a Minimally Conscious State and Affected by Multiple Disabilities

    Science.gov (United States)

    Lancioni, Giulio E.; O'Reilly, Mark F.; Singh, Nirbhay N.; Sigafoos, Jeff; Buonocunto, Francesca; Sacco, Valentina; Navarro, Jorge; Lanzilotti, Crocifissa; De Tommaso, Marina; Megna, Marisa; Oliva, Doretta

    2013-01-01

    This study assessed technology-aided programs for helping two post-coma persons, who had emerged from a minimally conscious state and were affected by multiple disabilities, to (a) engage with leisure stimuli and request caregiver's procedures, (b) send out and listen to text messages for communication with distant partners, and (c) combine…

  13. A Technology-Assisted Learning Setup as Assessment Supplement for Three Persons with a Diagnosis of Post-Coma Vegetative State and Pervasive Motor Impairment

    Science.gov (United States)

    Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Buonocunto, Francesca; Sacco, Valentina; Colonna, Fabio; Navarro, Jorge; Lanzilotti, Crocifissa; Bosco, Andrea; Megna, Gianfranco; De Tommaso, Marina

    2009-01-01

    Post-coma persons in an apparent condition of vegetative state and pervasive motor impairment pose serious problems in terms of assessment and intervention options. A technology-based learning assessment procedure might serve for them as a diagnostic supplement with possible implications for rehabilitation intervention. The learning assessment…

  14. Teaching students on the specialty “Technology of Perfume-Cosmetic Preparations” in Zaporizhzhya State Medical University the legal aspects of pharmacist-cosmetologists professional activities

    Directory of Open Access Journals (Sweden)

    I. M. Alekseeva

    2012-12-01

    Full Text Available The article refl ects the experience of teaching the legal aspects of professional activities of pharmacists-cosmetologists to the students of Pharmaceutical Faculty, specialty «Technology of perfumery and cosmetics» in Zaporozhye State Medical University.

  15. MSaTERs: Mathematics, Science, and Technology Educators and Researchers of The Ohio State University. Proceedings of the Annual Spring Conference (2nd, May 16, 1998, Columbus, OH).

    Science.gov (United States)

    Reed, Michelle K., Ed.; Costner, Kelly M., Ed.

    The Mathematics, Science, and Technology Educators and Researchers of The Ohio State University (MSaTERS-OSU) is a newly formed student organization. Papers from the conference include: (1) "Was the Geometry Course, The Nature of Proof, Taught by Harold Pascoe Fawcett the Best Course Ever Taught in Secondary School?" (Frederick Flener); (2) "A…

  16. The Marriage of Rigorous Academics and Technical Instruction with State-of-the-Art Technology: A Success Story of the William T. McFatter Technical High School

    Science.gov (United States)

    Blasik, Katherine; Williams, Richard G.; Johnson, Jeanette; Boegli, D. Robert

    2004-01-01

    The search for high school reform leads to William T. McFatter Technical High School in Broward County Public Schools, Florida. The purpose of this article is to highlight key information about the school and to demonstrate the success of its rigorous academic and technical instruction with state-of-the-art technology. By sharing this…

  17. Emerging Radio and Manet Technology Study: Research Support for a Survey of State-of-the-art Commercial and Military Hardware/Software for Mobile Ad Hoc Networks

    Science.gov (United States)

    2014-10-01

    Emerging Radio and MANET Technology Study Research Support for a Survey of State-of-the-art Commercial and Military Hardware/Software...control (SA+C2) device that could be used by tactical units. This device would connect individual unit members through a mobile ad-hoc network ( MANET ...

  18. Converging micro-nano-bio technologies towards integrated biomedical systems: state of the art and future perspectives under the EU-information & communication technologies program.

    Science.gov (United States)

    Lymberis, A

    2008-01-01

    Research and development at the convergence of microelectronics, nano-materials, biochemistry, measurement technology and information technology is leading to a new class of biomedical systems and applications e.g. molecular imaging, point of care testing, gene therapy and bionics (including on and inside the body sensors and other miniaturised smart systems) which are expected to revolutionise the healthcare provision and quality of life. In particular they are expected to identify diseases at the earliest possible stage, intervene before symptomatic disease becomes apparent and monitor both the progress of the diseases and the effect of intervention and therapeutic procedures. The group of EC-funded projects on Micro-Nano-Bio Convergence Systems, "so-called" MNBS, is made by projects developing systems that use a vast array of technologies to integrate across traditional boundaries between the micro-nano-bio, and info worlds, enabling a wide range of applications from health care to food quality monitoring. It includes mainly two sub-groups, one dealing with systems for in vitro molecular diagnosis and biological/biochemical analysis and the other is dealing with systems for in vivo interaction with the human body. Current status of development and future challenges, technological and socioeconomic, are briefly presented in this paper as background introductory information to the mini-symposium on MNBS. Relevant examples of R&D within the group will be presented in the mini-symposium.

  19. Trends in OMI NO2 observations over the United States: effects of emission control technology and the economic recession

    Science.gov (United States)

    Russell, A. R.; Valin, L. C.; Cohen, R. C.

    2012-12-01

    Observations of tropospheric NO2 vertical column densities over the United States (US) for 2005-2011 are evaluated using the OMI Berkeley High Resolution (BEHR) retrieval algorithm. We assess changes in NO2 on day-of-week and interannual timescales to assess the impact of changes in emissions from mobile and non-mobile sources on the observed trends. We observe consistent decreases in cities across the US, with an average total reduction of 32 ± 7% across the 7 yr. Changes for large power plants have been more variable (-26 ± 12%) due to regionally-specific regulation policies. An increasing trend of 10-20% in background NO2 columns in the northwestern US is observed. We examine the impact of the economic recession on emissions and find that decreases in NO2 column densities over cities were moderate prior to the recession (-6 ± 5% yr-1), larger during the recession (-8 ± 5% yr-1), and then smaller after the recession (-3 ± 4% yr-1). Differences in the trends observed on weekdays and weekends indicate that prior to the economic recession, NO2 reductions were dominated by technological improvements to the light-duty vehicle fleet but that a decrease in diesel truck activity has contributed to emission reductions since the recession. We use the satellite observations to estimate a 34% decrease in NO2 from mobile sources in cities for 2005-2011 and use that value to infer changes in non-mobile sources. We find that reductions in NO2 from non-mobile sources in cities have been both more modest and more variable than NO2 reductions from mobile sources (-10 ± 13%).

  20. Technology-enabled services for older people living at home independently: lessons for public long-term care authorities in the EU Member States

    OpenAIRE

    CARRETERO GOMEZ STEPHANIE

    2015-01-01

    This report collects six policy lessons to support public authorities at all levels of the EU Member States for the adequate implementation and use of new technologies in the field of long-term care service provision for older people. These policy lessons have been obtained through the ICT-AGE research project carried out by the JRC-IPTS and funded by DG EMPL, based on the cross-analysis of good practices of technology-enabled services to help older people live independently at home. These le...

  1. Adoption and impacts of of microirrigation technologies: Empirical results from selected localities of Maharashtra and Gujarat states of India

    OpenAIRE

    Namara, R.E.; Upadhyay, B.; Nagar, R. K.

    2005-01-01

    Metadata only record This report analyzes the economics of alternative microirrigation technologies ranging from low-cost drip and sprinkler systems to the capital-intensive systems, the determinants of adoption of microirrigation technology, the poverty outreach of the different microirrigation systems, and the sustainability implications of microirrigation adoption.

  2. A systematic assessment of the state of hazardous waste clean-up technologies. Quarterly technical progress report, April 1--June 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Berg, M.T.; Reed, B.E.; Gabr, M.

    1993-07-01

    West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Report for Year 1 of the Agreement. This report reflects the progress and/or efforts performed on the following nine technical projects encompassed by the Year 1 Agreement for the period of April 1 through June 30, 1993: Systematic assessment of the state of hazardous waste clean-up technologies; site remediation technologies -- drain-enhanced soil flushing (DESF) for organic contaminants removal; site remediation technologies -- in situ bioremediation of organic contaminants; excavation systems for hazardous waste sites; chemical destruction of polychlorinated biphenyls; development of organic sensors -- monolayer and multilayer self-assembled films for chemical sensors; Winfield lock and dam remediation; Assessments of Technologies for hazardous waste site remediation -- non-treatment technologies and pilot scale test facility implementation; and remediation of hazardous sites with stream reforming.

  3. Solid state laser technology for inertial confinement fusion: A collection of articles from ''Energy and Technology Review''

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This paper contains reprinted articles that record several milestones in laser research at LLNL. ''Neodymium-Glass Laser Research and Development at LLNL'' recounts the history of the Laser Program and our work on neodymium-glass lasers. ''Nova Laser Technology'' describes the capabilities of the Nova laser and some of its uses. ''Building Nova: Industry Relations and Technology Transfer'' illustrates the Laboratory's commitment to work with US industry in technology development. ''Managing the Nova Laser Project'' details the organization and close monitoring of costs and schedules during the construction of the Nova laser facility. The article ''Optical Coatings by the Sol-Gel Process,'' describes our chemical process for making the damage-resistant, antireflective silica coatings used on the Nova laser glass. The technical challenges in designing and fabricating the KDP crystal arrays used to convert the light wave frequency of the Nova lasers are reported in ''Frequency Conversion of the Nova Laser.'' Two articles, ''Eliminating Platinum Inclusions in Laser Glass'' and ''Detecting Microscopic Inclusions in Optical Glass,'' describe how we dealt with the problem of damaging metal inclusions in the Nova laser glass. The last article reprinted here, ''Auxilliary Target Chamber for Nova,'' discusses the diversion of two of Nova's ten beamlines into a secondary chamber for the purpose of increasing our capacity for experimentation.

  4. Multi-state Beef Reproduction Task Force provides science-based recommendations for the application of reproductive technologies.

    Science.gov (United States)

    Johnson, S K; Funston, R N; Hall, J B; Kesler, D J; Lamb, G C; Lauderdale, J W; Patterson, D J; Perry, G A; Strohbehn, D R

    2011-09-01

    Since its formation, the Beef Reproduction Task Force (BRTF) has worked to enhance productivity and profitability of US beef herds by integrating research and extension efforts with the intent of more effectively transferring the use of reproductive technologies to the field. A key early step was to coordinate efforts in identifying effective breeding management protocols for beef cattle and to clarify their associated acronyms. A short list of recommended protocols and their acronyms for synchronization of estrus and ovulation in beef cattle was developed based on results from peer-reviewed, published research and a comprehensive review of data collected from the field. The list of recommended protocols was developed by the BRTF in cooperation with veterinarians and cattle AI industries. These protocols and their acronyms are presented uniformly in all of the major AI sire directories and are available online at http://www.beefrepro.info. Protocol updates are made annually to incorporate the most recent research findings related to estrous cycle control in beef cattle. The Estrus Synchronization Planner, a software program developed in cooperation with the Iowa Beef Center, now reflects these same recommendations. Beginning in 2002, the BRTF hosted and presented 11 educational workshops to more than 1,900 attendees in key cow-calf states. These Applied Reproductive Strategies in Beef Cattle workshops targeted beef producers, AI industry personnel, veterinarians, allied industry representatives, and academicians. A national media sponsor provided online coverage of the last 3 workshops at http://www.appliedreprostrategies.com. A postmeeting evaluation, developed to assess application of information from 2 recent workshops, was returned by 55% of those contacted (n = 150). Attendees averaged 16 (± 13.4 SD) yr of AI experience, and 80% of respondents represented more than 100 cows. Respondents were asked to estimate the value of AI-sired calves compared with natural

  5. Village lighting in Sri Lanka : socio-economic impact evaluation of LUTW solid state lighting (SSL) technology

    Energy Technology Data Exchange (ETDEWEB)

    Leon, S. [Calgary Univ., AB (Canada). Dept. of Electrical and Computer Engineering, Light Up the World Foundation; Graham, S. [SGA Energy Ltd., Ottawa, ON (Canada)

    2005-05-15

    This paper evaluated the post-installation impacts of Light Up the World's (LUTW) solid state lighting (SSL) project in 5 off-grid farming villages in Sri Lanka, where more than half the population does not have access to electricity. The LUTW Foundation is a humanitarian organization founded in 1997 to bring affordable, safe, healthy, reliable, and environmentally sound home lighting to developing countries. It brings SSL technologies to improve the quality of life for people living in villages with little realistic prospect for affordable electrification. In July 2002, LUTW provided SSL to the villages in Sri Lanka and has since installed lighting in nearly 400 homes located off-grid. The SSL systems used in the homes in the Sri Lankan projects consists of two 1-watt white light emitting diodes (WLED) lamps, one 12 volt 7 amp-hour sealed lead-acid battery and the required wiring and switches. Batteries are charged at village charging stations equipped with a 75 watt solar panel powering a car battery which recharges 12 small homeowner batteries. Each lamp costs about $20 USD. This report presents the results of a social and economic survey of the installations. The villagers were interviewed in order to evaluate the technical, social and economic impacts of LUTW's products on off-grid areas. The objective was to determine where improvements could be made to LUTW's capacity to deliver products with meaningful development impacts. The most quantitative benefit identified by the survey was a savings in kerosene fuel and money. In general, the LED light replaced 1 kerosene lantern except for high income groups who reduced their kerosene lamp use even more. Qualitatively, the LED provided other advantages over kerosene lighting, such as better quality of light; increased safety; increased academic performance for children; and, improved crop yields when used to ward off elephant ravage. The survey showed that not much importance was place on a more

  6. The present-day state and outlooks of using plasma-energy technologies in heat power industry

    Energy Technology Data Exchange (ETDEWEB)

    Karpenko, E.; Messerle, V.; Buyantuev, S. [J.S. Co. `Gusinoozyorsk SDPS`, Gusinoozyorsk (Russian Federation)

    1997-12-31

    The urgency of using plasma-energy technologies in the power industry is outlined with the aim of increasing economical efficiency, decreasing of energy consumption and decreasing environmental pollution. Scientific and technical bases for plasma-energy technologies of fuel utilization, are presented, with results of theoretical, experimental and rig investigations of processes of plasma ignition, gasification, thermochemical preparation for burning and combined processing of coals. Results of realization of plasma technologies of residual-oil-free (mazout) pulverized coal boiler kindling, lighting of torch and stabilization of fluid slagging in furnaces with removal of fluid slag, are described. 6 refs.,1 fig., 2 tabs.

  7. CHARACTERIZING COSTS, SAVINGS AND BENEFITS OF A SELECTION OF ENERGY EFFICIENT EMERGING TECHNOLOGIES IN THE UNITED STATES

    Energy Technology Data Exchange (ETDEWEB)

    Xu, T.; Slaa, J.W.; Sathaye, J.

    2010-12-15

    Implementation and adoption of efficient end-use technologies have proven to be one of the key measures for reducing greenhouse gas (GHG) emissions throughout the industries. In many cases, implementing energy efficiency measures is among one of the most cost effective investments that the industry could make in improving efficiency and productivity while reducing CO2 emissions. Over the years, there have been incentives to use resources and energy in a cleaner and more efficient way to create industries that are sustainable and more productive. With the working of energy programs and policies on GHG inventory and regulation, understanding and managing the costs associated with mitigation measures for GHG reductions is very important for the industry and policy makers around the world. Successful implementation of emerging technologies not only can help advance productivities and competitiveness but also can play a significant role in mitigation efforts by saving energy. Providing evaluation and estimation of the costs and energy savings potential of emerging technologies is the focus of our work in this project. The overall goal of the project is to identify and select emerging and under-utilized energy-efficient technologies and practices as they are important to reduce energy consumption in industry while maintaining economic growth. This report contains the results from performing Task 2"Technology evaluation" for the project titled"Research Opportunities in Emerging and Under-Utilized Energy-Efficient Industrial Technologies," which was sponsored by California Energy Commission and managed by CIEE. The project purpose is to analyze market status, market potential, and economic viability of selected technologies applicable to the U.S. In this report, LBNL first performed re-assessments of all of the 33 emerging energy-efficient industrial technologies, including re-evaluation of the 26 technologies that were previously identified by Martin et al. (2000) and

  8. The push to increase the use of EHR technology by hospitals and physicians in the United States through the HITECH Act and the Medicare incentive program.

    Science.gov (United States)

    Pipersburgh, Jessica

    2011-01-01

    This article reviews key health care spending and electronic health records (EHR) statistics in the United States (Section II); highlights positive and negative aspects of EHR technology (Sections III and IV); briefly reviews the passage of the Health Information Technology for Economic and Clinical Health Act (HITECH) (Section V); discusses the rule passed by the Office of the National Coordinator for Health Information Technology (ONCHIT) and to implement the goals of HITECH (Section VI); discusses the rule passed by the Centers for Medicare & Medicaid Services (CMS) to implement the goals of HITECH and focuses on significant requirements of the Medicare incentive program rule as it applies to hospitals and physicians (Section VII); and finally, concludes by highlighting certain issues that have been raised regarding the goals of HITECH (Section VIII).

  9. Rehabilitation Engineering & Assistive Technology Society (RESNA) position on the application of wheelchair standing devices: 2013 current state of the literature.

    Science.gov (United States)

    Dicianno, Brad E; Morgan, Amy; Lieberman, Jenny; Rosen, Lauren

    2016-01-01

    This article, approved by the Rehabilitation Engineering & Assistive Technology Society of North America Board of Directors on December 23, 2013, shares typical clinical applications and provides evidence from the literature supporting the use of wheelchair standers.

  10. Using state-of-the-art technology to evaluate saltwater intrusion in the Biscayne aquifer of Miami-Dade County, Florida

    Science.gov (United States)

    Prinos, Scott T.

    2014-01-01

    The fresh groundwater supplies of many communities have been adversely affected or limited by saltwater intrusion. An insufficient understanding of the origin of intruded saltwater may lead to inefficient or ineffective water-resource management. A 2008–2012 cooperative U.S. Geological Survey (USGS) and Miami-Dade County study of saltwater intrusion describes state-of-the art technology used to evaluate the origin and distribution of this saltwater.

  11. ADOPTION OF RENEWABLE ENERGY TECHNOLOGIES (RET) IN TOURISM INDUSTRY- (A CASE OF OSOGBO AND OLORUNDA LOCAL GOVERNMENT AREAS IN OSUN STATE, NIGERIA)

    OpenAIRE

    Sonubi, O.K.; Ogunjimi, A. A.; Adeyemo, A. I.

    2017-01-01

    Hotel accommodation in Nigeria is comparatively more expensive than its neighbours in the sub region of West Africa. It is one of the most expensive globally. This is attributable to its operating environment. Any sustainable means of reducing running costs would be most welcome. A study on adoption of renewable energy technologies (RET) was conducted in Osogbo and Olorunda Local Government Areas of Osun State, Nigeria. Data were obtained from registered hotels in the two local government are...

  12. S. 473: A Bill to promote the industrial competitiveness and economic growth of the United States by strengthening the linkages between the laboratories of the Department of Energy and the private sector and by supporting the development and application of technologies critical to the economic, scientific and technological competitiveness of the United States, and for other purposes. Introduced in the House of Representatives, One Hundred Third Congress, First Session, March 2, 1993 and June 24, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The report S. 473 is a bill to promote the industrial competitiveness and economic growth of the United States by strengthening linkages between the laboratories of the Department of Energy (DOE) and the private sector and by supporting the development and application of technologies critical to the economic, scientific and technological competitiveness of the United States. The proposed legislative text is included.

  13. A Joint Workshop on Promoting the Development and Deployment of IGCC/Co-Production/CCS Technologies in China and the United States. Workshop report

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Lifeng; Ziao, Yunhan; Gallagher, Kelly Sims

    2009-06-03

    With both China and the United States relying heavily on coal for electricity, senior government officials from both countries have urged immediate action to push forward technology that would reduce carbon dioxide emissions from coal-fired plants. They discussed possible actions at a high-level workshop in April 2009 at the Harvard Kennedy School jointly sponsored by the Belfer Center's Energy Technology Innovation Policy (ETIP) research group, China's Ministry of Science and Technology, and the Chinese Academy of Sciences. The workshop examined issues surrounding Integrated Gasification Combined Cycle (IGCC) coal plants, which turn coal into gas and remove impurities before the coal is combusted, and the related carbon capture and sequestration, in which the carbon dioxide emissions are captured and stored underground to avoid releasing carbon dioxide into the atmosphere. Though promising, advanced coal technologies face steep financial and legal hurdles, and almost certainly will need sustained support from governments to develop the technology and move it to a point where its costs are low enough for widespread use.

  14. Report to the President on the Use of Technology to Strengthen K-12 Education in the United States: Findings Related to Research and Evaluation

    Science.gov (United States)

    Shaw, David E.; Becker, Henry J.; Bransford, John D.; Davidson, Jan; Hawkins, Jan; Malcom, Shirley; Molina, Mario; Ride, Sally K.; Sharp, Phillip; Tinker, Robert F.; Vest, Charles; Young, John; Allen, Richard; Bakia, Marianne; Bryson, Rebecca; Chen, C. Samantha; Costello, Caroline M.; Deckel, Garrett M.; Dial, Marjorie R.; Kealey, Edith M.; Lehoczky, Sandor

    1998-06-01

    The Panel on Educational Technology was organized in April 1995 under the auspices of the President's Committee of Advisers on Science and Technology (PCAST) to provide advice to the President on matters related to the application of information technologies to K-12 education in the United States. Its findings and recommendations were set forth in March 1997 in the Report to the President on the Use of Technology to Strengthen K-12 Education in the United States. This report was based on a review of the research literature and on written submissions and oral briefings from a number of academic and industrial researchers, practicing educators, software developers, governmental agencies, and professional and industry organizations involved in various ways with the application of technology to education. Its most important finding is that a large-scale program of rigorous, systematic research on education in general and educational technology in particular will ultimately prove necessary to ensure both the efficacy and cost-effectiveness of technology use within our nation's K-12 schools. Finding that less than 0.1 percent of our nation's expenditures for elementary and secondary education are currently invested to determine which educational techniques actually work, and to find ways to improve them—an extremely low level relative to comparable ratios within the private sector—the Panel recommended that this figure be increased over a period of several years to at least 0.5 percent, and sustained at that level on an ongoing basis. Further, because no one state, municipality, or private firm could hope to capture more than a small fraction of the benefits associated with a significant advance in our understanding of how best to educate K-12 students, the Panel concluded that such funding will have to be provided largely at the federal level in order to avoid a systematic underinvestment (attributable to a classical form of economic externality) relative to the

  15. The role of government in the development and diffusion of renewable energy technologies: Wind power in the United States, California, Denmark and Germany, 1970--2000

    Science.gov (United States)

    Sawin, Janet Laughlin

    2001-07-01

    This dissertation seeks to determine the role of government policy in advancing the development and diffusion of renewable energy technologies, and to determine if specific policies or policy types are more effective than others in achieving these ends. This study analyzes legislation, regulations, research and development (R&D) programs and their impacts on wind energy in California, the rest of the United States, Denmark and Germany, from 1970 through 2000. These countries (and state) were chosen because each has followed a very different path and has adopted wind energy at different rates. Demand for energy, particularly electricity, is rising rapidly worldwide. Renewable energy technologies could meet much of the world's future demand for electricity without the national security, environmental and social costs of conventional technologies. But renewables now play only a minor role in the electric generation systems of most countries. According to conventional economic theory, renewable energy will achieve greater market penetration once it is cost-competitive with conventional generation. This dissertation concludes, however, that government policy is the most significant causal variable in determining the development and diffusion of wind energy technology. Policy is more important for bringing wind energy to maturity than a nation's wind resource potential, wealth, relative differences in electricity prices, or existing infrastructure. Further, policy is essential for enabling a technology to succeed in the marketplace once it is cost-competitive. Policies can affect a technology's perceived, or real, costs; they can reduce risks or increase the availability and affordability of capital; appropriate and consistent policies can eliminate barriers to wind technology. To be adopted on a large scale, renewables require effective, appropriate and, above all, consistent policies that are legislated with a long-term view toward advancing a technology and an

  16. Technology transfer with system analysis, design, decision making, and impact (Survey-2000) in acute care hospitals in the United States.

    Science.gov (United States)

    Hatcher, M

    2001-10-01

    This paper provides the results of the Survey-2000 measuring technology transfer for management information systems in health care. The relationships with systems approaches, user involvement, usersatisfaction, and decision-making were measured and are presented. The survey also measured the levels Internet and Intranet presents in acute care hospitals, which will be discussed in future articles. The depth of the survey includes e-commerce for both business to business and customers. These results are compared, where appropriate, with results from survey 1997 and changes are discussed. This information will provide benchmarks for hospitals to plan their network technology position and to set goals. This is the first of three articles based upon the results of the Srvey-2000. Readers are referred to a prior article by the author that discusses the survey design and provides a tutorial on technology transfer in acute care hospitals.

  17. THE CURRENT STATE OF THE PROBLEM OF CHILDREN HEALTH BORN IN RESULT OF THE ASSISTED REPRODUCTIVE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    V.O. Mansimova

    2011-01-01

    Full Text Available A brief historical background of development of the assisted reproductive technologies (ART is presented. The works of russian and foreign authors about the neonatal period, the health of babies born in result of different methods of ART (in vitro fertilization using ICSI were analyzed. After discussion there were indicated new approaches for prevention of perinatal morbidity and ensuring harmonious development and quality of life for these children. The necessity of a national multicenter study of the status of children born in result of induced pregnancy was proved.Key words: assisted reproductive technologies, IVF, ICSI technique, newborns, health.

  18. The State-of-the-Art of Materials Technology Used for Fossil and Nuclear Power Plants in China

    Science.gov (United States)

    Weng, Yuqing

    Combined with the development of energy in China during the past 30 years, this paper clarified that high steam parameters ultra-supercritical (USC) coal-fired power plants and 1000MW nuclear power plants are the most important method to optimize energy structure and achieve national goals of energy saving and CO2 emission in China. Additionally, requirement of materials technology in high steam parameters USC coal-fired power plants and 1000MW nuclear power plants, current research and major development of relevant materials technology in China were briefly described in this paper.

  19. Single-chamber solid oxide fuel cell technology - From its origins to today's state of the art

    Energy Technology Data Exchange (ETDEWEB)

    Khun, M. [Department of Mechanical Engineering, Ecole Polytechnique de Montreal, Montreal, Quebec, H3T 1J4 (Canada); Napporn, T. W. [Equipe Electrocatalyse, Laboratoire de Catalyse en Chimie Organique, UMR CNRS 6503, Universite de Poitiers, Poitiers (France)

    2010-07-01

    In single-chamber solid oxide fuel cells (SC-SOFCs), both anode and cathode are situated in a common gas chamber and are exposed to a mixture of fuel and oxidant. The working principle is based on the difference in catalytic activity of the electrodes for the respective anodic and cathodic reactions. The resulting difference in oxygen partial pressure between the electrodes leads to the generation of an open circuit voltage. Progress in SC-SOFC technology has enabled the generation of power outputs comparable to those of conventional SOFCs. This paper provides a detailed review of the development of SC-SOFC technology. (author)

  20. Disbursement of $65 million to the State of Texas for construction of a Regional Medical Technology Center at the former Superconducting Super Collider Site, Waxahachie, Texas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    As part of a settlement agreement between the US DOE and the State of Texas, DOE proposes to transfer $65 million of federal funds to the Texas National Research Laboratory Commission (TNLRC) for construction of the Regional Medical Technology Center (RMTC) to be located in Ellis County, Texas. The RMTC would be a state-of-the-art medical facility for proton cancer therapy, operated by the State of Texas in conjunction with the University of Texas Southwestern Medical Center. The RMTC would use the linear accelerator assets of the recently terminated DOE Superconducting Super Collider Project to accelerate protons to high energies for the treatment of cancer patients. The current design provides for treatment areas, examination rooms, support laboratories, diagnostic imaging equipment, and office space as well as the accelerators (linac and synchrotron) and beam steering and shaping components. The potential environmental consequences of the proposed action are expected to be minor.

  1. S. 473: A Bill to promote the industrial competitiveness and economic growth of the United States by strengthening the linkages between the laboratories of the Department of Energy and the private sector and by supporting the development and application of technologies critical to the economic, scientific and technological competitiveness of the United States, and for other purposes. Introduced in the Senate of the United States, One Hundred Third Congress, First Session, March 2, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The report S. 473 is a bill to promote the industrial competitiveness and economic growth of the United States (U.S.) by strengthening the linkages between the laboratories of the Department of Energy and the private sector and by supporting the development and application of technologies critical to the economic, scientific and technological competitiveness of the U.S. The proposed legislative text is included.

  2. State-of-the-Art Model Driven Game Development: A Survey of Technological Solutions for Game-Based Learning

    Science.gov (United States)

    Tang, Stephen; Hanneghan, Martin

    2011-01-01

    Game-based learning harnesses the advantages of computer games technology to create a fun, motivating and interactive virtual learning environment that promotes problem-based experiential learning. Such an approach is advocated by many commentators to provide an enhanced learning experience than those based on traditional didactic methods.…

  3. The Current State of Music Education in Ghana: A call for integration of Information and Communication Technology (ICT.

    Directory of Open Access Journals (Sweden)

    Anthony Yaw Nyamful

    2016-04-01

    Full Text Available The essence of this paper is to identify the current situation of music education in Ghana at the basic, secondary and tertiary level of education and the extent to which Information and Communication Technology has been integrated to the demands of the modern music student in Ghana. After studying the programmes of tertiary music institutions and syllabuses of examinations for basic and secondary schools it was revealed that there has been little emphasis as regards Information and communication technology. Furthermore, an interview conducted among a sample of music students, music teachers and professional musicians which was made out of a population across the southern section of Ghana, revealed limited knowledge pertaining to Music Technology as part of teaching and learning of music. Considering the importance of the study of music, the author of this paper therefore seeks to postulate that, as a means of upgrading teaching and learning of music, the Ministry of Education should organize workshops and conferences for music teachers in the area of Information and Communication Technology and how it could be applied to enhance the teaching and learning of music.

  4. The Roaring Thirties. Productivity Growth and Technological Change in Great Britain and the United States During the Early Twentieth Century

    NARCIS (Netherlands)

    Woltjer, P.J.

    2013-01-01

    A recent study in American economic history has shown that the 1930s, though scarred by relentless unemployment, mass migration and profound social and cultural change, were far from gloomy in terms of technological and business innovation. In light of these dynamic productivity developments and

  5. Measuring Effectiveness of Information, Communication and Technology (ICT) Tools in Teaching School Children: A Case Study from Chattisgarh State, India

    Science.gov (United States)

    Rao, J. Durga Prasad; Singh, Raksha

    2011-01-01

    The study was conducted to determine the effectiveness of Information Communication and Technology tools viz DLP (Distance Learning Projector) and Computer/Laptop in comparison with selected instructional media for teaching primary and secondary school pupils. It examined the effect of grade on the performance of the pupils taught with four…

  6. State-of-the-Art Model Driven Game Development: A Survey of Technological Solutions for Game-Based Learning

    Science.gov (United States)

    Tang, Stephen; Hanneghan, Martin

    2011-01-01

    Game-based learning harnesses the advantages of computer games technology to create a fun, motivating and interactive virtual learning environment that promotes problem-based experiential learning. Such an approach is advocated by many commentators to provide an enhanced learning experience than those based on traditional didactic methods.…

  7. Work Addiction and 21st Century Information Technologies in Traditional and Virtual Work Spaces in the United States

    Science.gov (United States)

    Hunka, Patricia L.

    2014-01-01

    This study was completed to understand whether or not work addiction or work addiction intensity could be predicted from mobile technology use. The study further investigated whether or not gender, workspace, income, or education level would moderate the relationship. The sample used was drawn from service industry employees who are not in the…

  8. State-of-The-Art Technologies Used in Training Delivery and Administration at the Institute of Public Administration: Case Study

    Science.gov (United States)

    Ewain, Saleh A. S.

    2005-01-01

    The Institute of Public Administration (IPA), in Saudi Arabia, is a well renowned training institution designated for training civil servants in the Kingdom of Saudi Arabia. This paper mainly discusses the uses of technologies in the administrative aspects of the IPA. The author also points out the obstacles faced and lessons learned from the…

  9. Using stated preference methods to design cost-effective subsidy programs to induce technology adoption: an application to a stove program in southern Chile.

    Science.gov (United States)

    Gómez, Walter; Salgado, Hugo; Vásquez, Felipe; Chávez, Carlos

    2014-01-01

    We study the design of an economic incentive based program - a subsidy - to induce adoption of more efficient technology in a pollution reduction program in southern Chile. Stated preferences methods, contingent valuation (CV), and choice experiment (CE) are used to estimate the probability of adoption and the willingness to share the cost of a new technology by a household. The cost-effectiveness property of different subsidy schemes is explored numerically for different regulatory objectives. Our results suggest that households are willing to participate in voluntary programs and to contribute by paying a share of the cost of adopting more efficient technologies. We find that attributes of the existing and the new technology, beyond the price, are relevant determinant factors of the participation decision and payment. Limited access to credit markets for low income families can be a major barrier for an effective implementation of these types of programs. Variations in the design of the subsidy and on the regulator's objective and constraints can have significant impact on the level and the cost of reduction of aggregate emissions achieved.

  10. The Y Generation Myth: Evidences Based on the Causality Relations Among Age, Diffusion and Adoption of Technology of College Students of São Paulo State

    Directory of Open Access Journals (Sweden)

    Marcelo Gabriel

    2014-06-01

    Full Text Available The objective of this research was to assess whether college students, classified as Digital Natives and Digital Immigrants, show different behavioral styles and adoption profiles in relation to technology. To do so three measurement scales (Technological Origin - OTE, Adoption Profile - PAD and Innovator Behavioral Style - ECI were used and to identify the causal relationships among concepts, attitudes and processes of technology adoption among students. The data analysis choice was based on structural equation model (SEM variance based approach or partial least squares (PLS-SEM using the SmartPLS 2.0 software. The general model was tested, comprised by the constructs of the three scales and then a variable which characterizes the respondent’s generation was introduced as moderator. As a result it is possible to state that for the concepts of Digital Native and Digital Immigrant are lacking empirical foundations, simply serving as a rhetorical figure, of easy acceptance and assimilation, but unable to substantiate the existence of a phenomenon or generations effect on the process of diffusion and technology adoption, unlike what is commonly proposed in the literature. 

  11. STATE-OF-THE-ART AND EMERGING TRUCK ENGINE TECHNOLOGIES FOR OPTIMIZED PERFORMANCE, EMISSIONS AND LIFE CYCLE COSTS

    Energy Technology Data Exchange (ETDEWEB)

    Schittler, M

    2003-08-24

    The challenge for truck engine product engineering is not only to fulfill increasingly stringent emission requirements, but also to improve the engine's economical viability in its role as the backbone of our global economy. While societal impact and therefore emission limit values are to be reduced in big steps, continuous improvement is not enough but technological quantum leaps are necessary. The introduction and refinement of electronic control of all major engine systems has already been a quantum leap forward. Maximizing the benefits of these technologies to customers and society requires full use of parameter optimization and other enabling technologies. The next big step forward will be widespread use of exhaust aftertreatment on all transportation related diesel engines. While exhaust gas aftertreatment has been successfully established on gasoline (Otto cycle) engines, the introduction of exhaust aftertreatment especially for heavy-duty diesel engines will be much mo re demanding. Implementing exhaust gas aftertreatment into commercial vehicle applications is a challenging task but the emission requirements to be met starting in Europe, the USA and Japan in the 2005-2007 timeframe require this step. The engine industry will be able to implement the new technology if all stakeholders support the necessary decisions. One decision has already been taken: the reduction of sulfur in diesel fuel being comparable with the elimination of lead in gasoline as a prerequisite for the three-way catalyst. Now we have the chance to optimize ecology and economy of the Diesel engine simultaneously by taking the decision to provide an additional infrastructure for a NOx reduction agent needed for the introduction of the Selective Catalytic Reduction (SCR) technology that is already implemented in the electric power generation industry. This requires some effort, but the resulting societal benefits, fuel economy and vehicle life cycle costs are significantly better

  12. THE ROLE OF MEDIA IN SCIENCE AND TECHNOLOGY EDUCATION, DEVELOPMENT AND REHABILITATION OF WOMEN AFFECTED BY THE 2004 TSUNAMI IN THE OF THE STATE OF TAMILNADU

    Directory of Open Access Journals (Sweden)

    P. Sri Jothi

    2011-01-01

    Full Text Available The great Sumatra earthquake of 26 December 2004 generated a destructive tsunami which devastated coastal communities bordering the Indian Ocean, killing thousands of people in Indonesia, Sri Lanka, India, Thailand, Somalia, Myanmar, the Maldives, Malaysia, Tanzania, Seychelles, Bangladesh, South Africa, Yemen and Kenya. It was one of the deadliest natural disasters in modern history. In India, the death toll and damages were severe, particularly along the southern and eastern coastal regions. Subsequently, central and state government authorities in the state of Tamilnadu - one of the most severely stricken regions - took immediate measures for tsunami preparedness and rehabilitation. The media played a major role in this effort by communicating to the public information related to the science and technology facts of tsunami hazards and to ways of mitigating their impact with better understanding and preparedness. Through its superior ability to communicate effectively information, the media became the role model in helping people make decisions for their own welfare. The present study was undertaken for the purpose of determining the media’s role in the post-rehabilitation efforts and particularly in improving the status of affected women of the north Chennai region, who were forced to migrate from Ernavour and Ennore, in Chennai district, in the India state of Tamilnadu, by providing them science and technology communication.

  13. Incipient Gearbox Fault Diagnosis Based on the Reverse State Transformation of the Chaotic Duffing Oscillator and Sampling Integral Technology

    Directory of Open Access Journals (Sweden)

    Li Jie

    2015-01-01

    Full Text Available Incipient fault for a gearbox diagnosis is difficult because the signals with low signal-to-noise ratio (SNR are corrupted with background noise. A method based on chaos theory and sampling integral technology will be presented to detect the incipient fault of gearbox according to the characters of the gearbox vibration signals. Sampling integral technology was used to improve the tracking ability of fault signals with lower SNR. The small changes in the sidebands of meshing frequency can be detected by the transformation of chaotic phase diagram and its Hu moment invariants, and on this basis the incipient faults can be diagnosed. The results based on gearboxes experiment justify the effectiveness of the method.

  14. Availability of advanced foreign energy conversion and conservation technology for use in the United States. Biennial report

    Energy Technology Data Exchange (ETDEWEB)

    Straus, R W; Thurman, R S; Carsey, J N; Fujishima, C; Hammel, J; Dietrich, P; Pfeil, R; Bottomley, K

    1978-12-01

    The assignment by DOE requested Galaxy to, Review and evaluate all field data and to define areas where foreign work is ready to be implemented by US; areas where US work might be dropped since foreign R and D is more advanced; areas where foreign R and D indicate sufficient promise for the US to initiate work in; areas where cooperative R and D ventures or licensing agreements might prove beneficial, etc. The specific technologies to be investigated by Galaxy were set forth in Tasks I and V of the contract as follows: Task I: (A) waste heat utilization, (B) advanced cycles, (C) component reliability and efficiency, (D) heat transfer, and (E) combustion and materials; Task V: (A) controls and process efficiency; (B) materials and fabrication; (C) components and heat engines; (D) thermodynamics and heat transfer; (E) fuel cells; (F) combustion and alternate fuels; and (G) heat utilization, planning and analysis. The foreign technology is briefly identified within the areas set forth. (WHK)

  15. State of the Art for Deep Brain Stimulation Therapy in Movement Disorders: A Clinical and Technological Perspective.

    Science.gov (United States)

    Wagle Shukla, Aparna; Okun, Michael S

    2016-01-01

    Deep brain stimulation (DBS) therapy is a widely used brain surgery that can be applied for many neurological and psychiatric disorders. DBS is American Food and Drug Administration approved for medication refractory Parkinson's disease, essential tremor and dystonia. Although DBS has shown consistent success in many clinical trials, the therapy has limitations and there are well-recognized complications. Thus, only carefully selected patients are ideal candidates for this surgery. Over the last two decades, there have been significant advances in clinical knowledge on DBS. In addition, the surgical techniques and technology related to DBS has been rapidly evolving. The goal of this review is to describe the current status of DBS in the context of movement disorders, outline the mechanisms of action for DBS in brief, discuss the standard surgical and imaging techniques, discuss the patient selection and clinical outcomes in each of the movement disorders, and finally, introduce the recent advancements from a clinical and technological perspective.

  16. Advances in Remote Sensing for Oil Spill Disaster Management: State-of-the-Art Sensors Technology for Oil Spill Surveillance

    OpenAIRE

    Yang Gao; Jason Levy; Maya Nand Jha

    2008-01-01

    Reducing the risk of oil spill disasters is essential for protecting the environment and reducing economic losses. Oil spill surveillance constitutes an important component of oil spill disaster management. Advances in remote sensing technologies can help to identify parties potentially responsible for pollution and to identify minor spills before they cause widespread damage. Due to the large number of sensors currently available for oil spill surveillance, there is a need for a comprehensiv...

  17. Exploring the Eastern United States Continental Shelf with the NOAA Cooperative Institute for Ocean Exploration, Research, and Technology

    Science.gov (United States)

    Glickson, D.; Pomponi, S.

    2015-12-01

    The Cooperative Institute for Ocean Exploration, Research, and Technology (CIOERT) serves NOAA priorities in three theme areas: exploring the eastern U.S. continental shelf, improving the understanding of coral and sponge ecosystems, and developing advanced underwater technologies. CIOERT focuses on the exploration and research of ecosystems and habitats along frontier regions of the eastern U.S. continental shelf that are of economic, scientific, or cultural importance or of natural hazards concern. One particular focus is supporting ocean exploration and research through the use of advanced underwater technologies and techniques in order to improve the understanding of vulnerable deep and shallow coral and sponge ecosystems. CIOERT expands the scope and efficiency of exploration and research by developing, testing, and applying new and/or innovative uses of existing technologies to ocean exploration and research activities. In addition, CIOERT is dedicated to expanding ocean literacy and building NOAA's technical and scientific workforce through hands-on, at-sea experiences. A recent CIOERT cruise characterized Gulf of Mexico mesophotic and deepwater reef ecosystems off the west Florida shelf, targeting northern Pulley Ridge. This project created and ground-truthed new sonar maps made with an autonomous underwater vehicle; conducted video and photographic transects of benthic habitat and fish using a remotely operated vehicle; and examined the connectivity of fauna from shallow to deep reef ecosystems. CIOERT was established in 2009 by FAU-Harbor Branch Oceanographic Institute, with University of North Carolina, Wilmington, SRI International, and the University of Miami. The primary NOAA partner is the Office of Oceanic and Atmospheric Research's Office of Ocean Exploration and Research.

  18. Current state of micro-robots/devices as substitutes for screening colonoscopy: assessment based on technology readiness levels.

    Science.gov (United States)

    Tapia-Siles, Silvia C; Coleman, Stuart; Cuschieri, Alfred

    2016-02-01

    Previous reports have described several candidates, which have the potential to replace colonoscopy, but to date, there is still no device capable of fully replacing flexible colonoscopy in the management of colonic disorders and for mass adult population screening for asymptomatic colorectal cancer. NASA developed the TRL methodology to describe and define the stages of development before use and marketing of any device. The definitions of the TRLS used in the present review are those formulated by "The US Department of Defense Technology Readiness Assessment Guidance" but adapted to micro-robots for colonoscopy. All the devices included are reported in scientific literature. They were identified by a systematic search in Web of Science, PubMed and IEEE Xplore amongst other sources. Devices that clearly lack the potential for full replacement of flexible colonoscopy were excluded. The technological salient features of all the devices included for assessment are described briefly, with particular focus on device propulsion. The devices are classified according to the TRL criteria based on the reported information. An analysis is next undertaken of the characteristics and salient features of the devices included in the review: wireless/tethered devices, data storage-transmission and navigation, additional functionality, residual technology challenges and clinical and socio-economical needs. Few devices currently possess the required functionality and performance to replace the conventional colonoscopy. The requirements, including functionalities which favour the development of a micro-robot platform to replace colonoscopy, are highlighted.

  19. PUBLIC E-PROCUREMENT AND THE DUALITY OF TECHNOLOGY: A COMPARATIVE STUDY IN THE CONTEXT OF BRAZIL AND OF THE STATE OF PARAÍBA

    Directory of Open Access Journals (Sweden)

    Flávio Perazzo Barbosa Mota

    2011-08-01

    Full Text Available In this study, an attempt was made to understand the e-procurement theme from the perspective of the duality of technology, understanding it both as a product and as a means for human actions, which, interacting with institutional properties, produces and reproduces the current organizational practices. From the multiple interpretative case studies conducted, it was evidenced that e-procurement is a subjective element, sometimes understood inconsistently by human agents in the different organizational contexts studied (Brazil and the State of Paraíba. Users appropriate the rules, knowledge, and assumptions incorporated into the implemented system to perform tasks, contributing to a reaffirmation of the status quo.

  20. IEA Wind Task 26. Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007–2012

    Energy Technology Data Exchange (ETDEWEB)

    Vitina, Aisma [Ea Energy Analyses, Copenhagen (Denmark); Lüers, Silke [Deutsche WindGuard, Varel (Germany); Wallasch, Anna-Kathrin [Deutsche WindGuard, Varel (Germany); Berkhout, Volker [Fraunhofer IWES, Kassel (Germany); Duffy, Aidan [Dublin Inst. of Technology and Dublin Energy Lab. (Ireland); Cleary, Brendan [Dublin Inst. of Technology and Dublin Energy Lab. (Ireland); Husabø, Lief I. [Norwegian Water Resources and Energy Directorate (NVE), Oslo (Norway); Weir, David E. [Norwegian Water Resources and Energy Directorate (NVE), Oslo (Norway); Lacal-Arántegui, Roberto [European Commission, Ispra (Italy). Joint Research Centre; Hand, Maureen [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lantz, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Belyeu, Kathy [Belyeu Consulting, Takoma Park, MD (United States); Wiser, Ryan H [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bolinger, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hoen, Ben [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-06-01

    The International Energy Agency Implementing Agreement for cooperation in Research, Development, and Deployment of Wind Energy Systems (IEA Wind) Task 26—The Cost of Wind Energy represents an international collaboration dedicated to exploring past, present and future cost of wind energy. This report provides an overview of recent trends in wind plant technology, cost, and performance in those countries that are currently represented by participating organizations in IEA Wind Task 26: Denmark, Germany, Ireland, Norway, and the United States as well as the European Union.

  1. Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup, and Oxygen Separation Equipment; Task 9: Mixed Alcohols From Syngas -- State of Technology

    Energy Technology Data Exchange (ETDEWEB)

    Nexant Inc.

    2006-05-01

    This deliverable is for Task 9, Mixed Alcohols from Syngas: State of Technology, as part of National Renewable Energy Laboratory (NREL) Award ACO-5-44027, ''Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup and Oxygen Separation Equipment''. Task 9 supplements the work previously done by NREL in the mixed alcohols section of the 2003 technical report Preliminary Screening--Technical and Economic Assessment of Synthesis Gas to Fuels and Chemicals with Emphasis on the Potential for Biomass-Derived Syngas.

  2. DEVELOPMENT OF THEORY AND METHODS OF USE OF INFORMATION AND COMMUNICATION TECHNOLOGIES IN TEACHING MATHEMATICS OF ENGINEERING SPECIALITIES STUDENTS IN THE UNITED STATES

    Directory of Open Access Journals (Sweden)

    Nataliia M. Kiianovska

    2014-10-01

    Full Text Available The article deals with the problems of information and communication technologies (ICT development in teaching mathematics of engineering specialities students in the United States. In the article the nature of trends of convergence of information system in higher technical education and other tendencies in the USA are сharacterized. The main historical stages of development of the theory and methods of ICT use in teaching mathematics of engineering specialities students in the United States are defined. The study of historical sources has been allowed to emphasize six stages, at each stage it is analyzed the use of ICT for teaching mathematics, it is shown the contradictions and the main features of the use of ICT in teaching mathematics of engineering specialities students.

  3. State-of-the-Art Sensor Technology in Spain: Invasive and Non-Invasive Techniques for Monitoring Respiratory Variables

    Directory of Open Access Journals (Sweden)

    Christian Domingo

    2010-05-01

    Full Text Available The interest in measuring physiological parameters (especially arterial blood gases has grown progressively in parallel to the development of new technologies. Physiological parameters were first measured invasively and at discrete time points; however, it was clearly desirable to measure them continuously and non-invasively. The development of intensive care units promoted the use of ventilators via oral intubation ventilators via oral intubation and mechanical respiratory variables were progressively studied. Later, the knowledge gained in the hospital was applied to out-of-hospital management. In the present paper we review the invasive and non-invasive techniques for monitoring respiratory variables.

  4. Analytical challenges of determining composition and structure in small volumes with applications to semiconductor technology, nanostructures and solid state science

    Science.gov (United States)

    Ma, Zhiyong; Kuhn, Markus; Johnson, David C.

    2017-03-01

    Determining the structure and composition of small volumes is vital to the ability to understand and control nanoscale properties and critical for advancing both fundamental science and applications, such as semiconductor device manufacturing. While metrology of nanoscale materials (nanoparticles, nanocomposites) and nanoscale semiconductor structures is challenging, both basic research and cutting edge technology benefit from new and enhanced analytical techniques. This focus issue contains articles describing approaches to overcome the challenges in obtaining statistically significant atomic-scale quantification of structure and composition in a variety of materials and devices using electron microscopy and atom probe tomography.

  5. 94 GHz power amplifier MMIC development in state of the art MHEMT and AlGaN/GaN technology

    NARCIS (Netherlands)

    Heijningen, M. van; Bent, G. van der; Rodenburg, M.; Vliet, F.E. van; Quay, R.; Brückner, P.; Schwantuschke, D.; Jukkala, P.; Narhi, T.

    2012-01-01

    Solid-state power amplifiers at W-band (75 - 110 GHz) are attractive for the generation of local-oscillator (LO) power for super-heterodyne receivers operating at sub-millimetre wave frequencies, as needed for example in future space instruments for Earth observation. Apart from space applications

  6. State of the Art of Language Learning Design Using Mobile Technology: Sample Apps and Some Critical Reflection

    Science.gov (United States)

    Bárcena, Elena; Read, Timothy; Underwood, Joshua; Obari, Hiroyuki; Cojocnean, Diana; Koyama, Toshiko; Pareja-Lora, Antonio; Calle, Cristina; Pomposo, Lourdes; Talaván, Noa; Ávila-Cabrera, José; Ibañez, Ana; Vermeulen, Anna; Jordano, María; Arús-Hita, Jorge; Rodríguez, Pilar; Castrillo, María Dolores; Kétyi, Andras; Selwood, Jaime; Gaved, Mark; Kukulska-Hulme, Agnes

    2015-01-01

    In this paper, experiences from different research groups illustrate the state-of-the-art of Mobile Assisted Language Learning (henceforth, MALL) in formal and non-formal education. These research samples represent recent and on-going progress made in the field of MALL at an international level and offer encouragement for practitioners who are…

  7. 94 GHz power amplifier MMIC development in state of the art MHEMT and AlGaN/GaN technology

    NARCIS (Netherlands)

    Heijningen, M. van; Bent, G. van der; Rodenburg, M.; Vliet, F.E. van; Quay, R.; Brückner, P.; Schwantuschke, D.; Jukkala, P.; Narhi, T.

    2012-01-01

    Solid-state power amplifiers at W-band (75 - 110 GHz) are attractive for the generation of local-oscillator (LO) power for super-heterodyne receivers operating at sub-millimetre wave frequencies, as needed for example in future space instruments for Earth observation. Apart from space applications t

  8. 94 GHz power amplifier MMIC development in state of the art MHEMT and AlGaN/GaN technology

    NARCIS (Netherlands)

    Heijningen, M. van; Bent, G. van der; Rodenburg, M.; Vliet, F.E. van; Quay, R.; Brückner, P.; Schwantuschke, D.; Jukkala, P.; Narhi, T.

    2012-01-01

    Solid-state power amplifiers at W-band (75 - 110 GHz) are attractive for the generation of local-oscillator (LO) power for super-heterodyne receivers operating at sub-millimetre wave frequencies, as needed for example in future space instruments for Earth observation. Apart from space applications t

  9. CURRENT STATE OF AUTOMOTIVE LIGHTING EQUIPMENT WITH NON-REPLACEABLE LIGHT SOURCES ON BASIS OF LIGHT-EMITTING DIODE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    S. Sernov

    2012-01-01

    Full Text Available The paper contains information on the current state of automotive lighting equipment. Different designs of automotive lighting devices, their merits and demerits are described in the paper. The paper includes a substantiation of expediency of developing light-emitting diode lighting and proposes recommendations about optimization of their design.

  10. Dr Kathryn Beers, Assistant Director Physical Sciences and Engineering, Office of Science and Technology Policy Executive Office of the President United States of America visit the CMS experiment at point 5.

    CERN Multimedia

    Maximilien Brice

    2007-01-01

    Dr Kathryn Beers, Assistant Director Physical Sciences and Engineering, Office of Science and Technology Policy Executive Office of the President United States of America visit the CMS experiment at point 5.

  11. CARACTERIZAÇÃO TECNOLÓGICA EM AMOSTRAS MINERALIZADAS A ESTANHO DO ESTADO DE RONDÔNIA/TECHNOLOGICAL CHARACTERIZATION OF TIN ORE SAMPLES FROM RONDÔNIA STATE, BRAZIL

    National Research Council Canada - National Science Library

    A B Braz; H Kahn; R Contessotto; C Ulsen; M M M L Tassinari

    2014-01-01

    .... This article shows the results of mineralogical and technological characterization carried out in two samples of tin ores from RondOnia state, Brazil, aiming the to quantify the cassiterite and other...

  12. 4 April 2013 - Spanish State Secretary of Science, Development and Innovation C. Vela Olmo in the LHC tunnel with Technology Department Head F. Bordry and signing the guest book with CERN Director-General R. Heuer.

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    4 April 2013 - Spanish State Secretary of Science, Development and Innovation C. Vela Olmo in the LHC tunnel with Technology Department Head F. Bordry and signing the guest book with CERN Director-General R. Heuer.

  13. 25 November 2008 - State Councilor in charge of Science, Technology and Education Y. Liu, People's Repblic of China, visiting AMS experiment with CERN Director-General R. Aymar and AMS Collaborator Y. Yang.

    CERN Multimedia

    Maximilien Brice

    2008-01-01

    25 November 2008 - State Councilor in charge of Science, Technology and Education Y. Liu, People's Repblic of China, visiting AMS experiment with CERN Director-General R. Aymar and AMS Collaborator Y. Yang.

  14. 我国全固态激光技术研发情况及发展趋势%New Progress on All Solid State Laser Technology in China

    Institute of Scientific and Technical Information of China (English)

    姚建铨

    2007-01-01

    @@ 1 Significance of All Solid State Laser (DPL)Technology in Field of Laser Because of the advantages of high conversion efficiency, good beam quality, small size and light weight, DPL becomes the hotspot and priority of development of laser technology. It may be the main body of laser in the future and replace gas laser and liquid laser. It is a great revolution of laser technology.

  15. IMPLEMENTATION OF INFORMATION AND COMMUNICATION TECHNOLOGIES AS A FACTOR OF COMPETITIVENESS GROWTH BY THE SMALL ENTERPRISES IN CIS STATES

    Directory of Open Access Journals (Sweden)

    O. Kuzioma

    2013-10-01

    Full Text Available The article shows that the international network of electronic communication helps the various economic agents in finding new partners, responding to the changing conditions quicker, facilitates the greater interaction of the economic partners and establishment of the trusting and long-term relationships, reduces the transaction costs and the distance between the partners, while simultaneously increasing the economic benefits of their relationship. It justifies the fact that the widespread implementation of information and communication technologies in the CIS countries might contribute to increasing the number of small businesses and private business organizations, as well as strengthen their competitive positions in the domestic and foreign markets. This article proves that the use of ICTs can enhance the effectiveness of the production and companies’ management system by increasing their access to the information, knowledge, financial services and other resources. As explained in this work, due to the use of ICTs new opportunities are created for the small private enterprises to develop the existing and discover the new types and directions of activity, which will contribute to the improvement of the population well-being. It also rationalizes that the expansion of the ICTs’ use by the government and other public bodies may support the increase of the business environment transparency and simplify procedures for starting and running a business. It determines why the spread of information technology, especially in the CIS countries, requires governmental support primarily in the development of information infrastructure and adaptation of the legislation to the conditions of the information economy.

  16. Supercritical fluid chromatography and steady-state recycling: phase appropriate technologies for the resolutions of pharmaceutical intermediates in the early drug development stage.

    Science.gov (United States)

    Yan, Tony Q; Orihuela, Carlos; Preston, Jay P; Xia, Fang

    2010-11-01

    The use of phase appropriate technologies is critical for efficiently moving drug candidates forward in the early stages of drug discovery and development. Phase appropriate purification technology develops the analytical method and subsequently scales up the method and turns the sample around quickly (Kennedy et al., J Chromatogr A 2004; 1046:55). In this article, separation results and conditions from supercritical fluid chromatography (SFC), high-performance liquid chromatography (HPLC), and steady-state recycling (SSR) for the resolutions of three pharmaceutical intermediates in the early stage of the drug development are discussed. The first study used SFC and SSR to separate an impurity for a Good Manufacturing Practice (GMP) campaign. The analytical method development and scale-up conditions are discussed. Productivity, solvent usage, and sample solubility under SFC and SSR conditions are also compared. The second study compared SFC to batch HPLC in separating a diastereomer. Due to higher separation efficiency, SFC was able to resolute multiple peaks. The third study involved the addition of dichloromethane as a co-solvent in SFC purification--improving sample selectivity and solubility. From the separation results of these purifications, SFC and SSR are clearly phase appropriate technologies in the early drug development stage.

  17. The use of radionuclide DNA probe technology for epidemiological studies of tegumentary leishmaniasis in Mato Grosso state, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Antero Silva Ribeiro de [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN), Belo Horizonte, MG (Brazil); Fernandes, Octavio [Fundacao Oswaldo Cruz (FIOCRUZ), Rio de Janeiro, RJ (Brazil). Dept. de Medicina Tropical; Heub, Marcia; Fontes, Cor Jesus [Universidade Federal do Mato Grosso, Cuiaba, MT (Brazil). Hospital Universitario Julio Muller; Carvalho, Maria de Lourdes Ribeiro; Melo, Maria Norma de [Universidade Federal de Minas Gerais, Belo Horizonte, MG (Brazil). Dept. de Parasitologia

    2005-10-15

    DNA hybridisation, using probes labelled with 32 P, was used to type Leishmania samples isolated from patients living in endemic areas of Mato Grosso State (Brazil), and clinically diagnosed as having tegumentary leishmaniasis. k DNA cloned mini-circle probes specific for the Leishmania mexicana and Leishmania braziliensis complexes were used. The results showed that L. braziliensis is the predominant group infecting human patients in the state. Sixty-eight samples were typed, 64 samples (94.1%) belonging to the L. braziliensis complex and only four (5.9%) belonging to the L. mexicana complex. Accurate identification of the Leishmania permits better orientation of the medical follow-up, since clinical manifestations may vary depending on the complex to which the parasite belongs. The epidemiological information furnished by the identification of the Leishmania in given endemic area is also essential for the design of appropriate control measures. (author)

  18. Multimodality imaging and state-of-art GPU technology in discriminating benign from malignant breast lesions on real time decision support system

    Science.gov (United States)

    Kostopoulos, S.; Sidiropoulos, K.; Glotsos, D.; Dimitropoulos, N.; Kalatzis, I.; Asvestas, P.; Cavouras, D.

    2014-03-01

    The aim of this study was to design a pattern recognition system for assisting the diagnosis of breast lesions, using image information from Ultrasound (US) and Digital Mammography (DM) imaging modalities. State-of-art computer technology was employed based on commercial Graphics Processing Unit (GPU) cards and parallel programming. An experienced radiologist outlined breast lesions on both US and DM images from 59 patients employing a custom designed computer software application. Textural features were extracted from each lesion and were used to design the pattern recognition system. Several classifiers were tested for highest performance in discriminating benign from malignant lesions. Classifiers were also combined into ensemble schemes for further improvement of the system's classification accuracy. Following the pattern recognition system optimization, the final system was designed employing the Probabilistic Neural Network classifier (PNN) on the GPU card (GeForce 580GTX) using CUDA programming framework and C++ programming language. The use of such state-of-art technology renders the system capable of redesigning itself on site once additional verified US and DM data are collected. Mixture of US and DM features optimized performance with over 90% accuracy in correctly classifying the lesions.

  19. Jackson State University (JSU)’s Center of Excellence in Science, Technology, Engineering, and Mathematics Education (CESTEME)

    Science.gov (United States)

    2016-01-08

    SCHOOL COLLEGE/ UNIVERSITY ATTENDING MAJOR/ Career Choice Barksdale, Marcus Lanier HS Jackson State University Civil Engineering Bennett...enhance the STEM academic infrastructure, and 2) mentor students to pursue careers and advanced degrees in STEM disciplines of relevance to the DoD...ORGANIZATION REPORT NUMBER 19a. NAME OF RESPONSIBLE PERSON 19b. TELEPHONE NUMBER Paul Tchounwou Paul B. Tchounwou, Theresa Hamilton, Lorene Essex 206022 c

  20. Batteries for Plug-in Hybrid Electric Vehicles (PHEVs): Goals and the State of Technology circa 2008

    OpenAIRE

    Axsen, Jonn; Burke, Andy; Kurani, Kenneth S

    2008-01-01

    This report discusses the development of advanced batteries for plug-in hybrid electric vehicle (PHEV) applications. We discuss the basic design concepts of PHEVs, compare three sets of influential technical goals, and explain the inherent trade-offs in PHEV battery design. We then discuss the current state of several battery chemistries, including nickel-metal hydride (NiMH) and lithium-ion (Li-Ion), comparing their abilities to meet PHEV goals, and potential trajectories for further improve...

  1. Targeted assistance by the state as a factor of stimulation of the development of high technology production in Ukraine

    OpenAIRE

    O. Salihova

    2011-01-01

    The author interprets the basic concepts of high-tech industrial production sphere, presents the tools to assess it. The dynamics of production and export of Ukrainian high-tech goods are analyzed. The main criteria for the identification of high-tech enterprises are defined. The author demonstrates the relevance of the targeted state regulation and stimulation of national manufacture of high-tech products.

  2. Biomass polygeneration - technology state-of-the-art, systems and policy instruments; Bioenergikombinat - tekniktrender, system och styrmedel

    Energy Technology Data Exchange (ETDEWEB)

    Gode, Jenny; Hagberg, Linus; Holmgren, Kristina; Stripple, Haakan

    2007-09-15

    The development status of biofuel technologies and pellets has been reviewed, with focus on the possibilities for polygeneration with combined heat and power (CHP). Policy instruments important for the development of polygeneration plants have been analysed and interviews with potential stakeholders have been carried out. Fermentation of biomass for ethanol production, gasification and conversion to synthesis gas, biodiesel production from vegetable and animal oils, as well as anaerobic digestion for biogas production are examples of common biofuel technologies. Some of these are commercially available whereas others require further development. Substantial research and development is also spent to develop new technologies for biofuel production. Biofuel production can often benefit from integration with CHP resulting in increased efficiency and energy balances. The potentials for integration vary between different biofuels, but the most common options are integration with respect to the raw material, heat demand, waste heat and waste products. The integration potential for pellets is mainly associated with the raw material and the heat demand for drying of the raw material. Integration of biofuel and/or pellets production with CHP might increase the potential for power production since a new heat customer is provided the whole year around. The heat demand for some biofuels and for pellets can be covered by district heating, whereas some biofuels require steam. Policy instruments can strongly influence the development of biofuels and thereby has a potential to affect the incentives for investments in polygeneration. From a climate point of view, it can be argued that biomass is better used for emission reductions in other sectors where higher reduction of greenhouse gases can be achieved to a lower cost. However, there are other driving forces that motivate increased use of biofuels, such as security of supply, need of revised agriculture policy and reduction of

  3. The state of rhizospheric science in the era of multi-omics: A practical guide to omics technologies

    Energy Technology Data Exchange (ETDEWEB)

    White, Richard Allen; Rivas-Ubach, Albert; Borkum, Mark I.; Köberl, Martina; Bilbao, Aivett; Colby, Sean M.; Hoyt, David W.; Bingol, Kerem; Kim, Young-Mo; Wendler, Jason P.; Hixson, Kim K.; Jansson, Christer

    2017-06-01

    Over the past century, the significance of the rhizosphere as a complex, biological system, comprised of vast, interconnected networks of microbial organisms that interact directly with their plant hosts (e.g., archæa, bacteria, fungi, eukaryotes, and viruses) has been increasingly recognized by the scientific community. Providing a nutritional base to the terrestrial biosphere, the rhizosphere is integral to plant growth, crop production and ecosystem health. Lack of mechanistic understanding of the rhizosphere constitutes a critical knowledge gap, inhibiting our ability to predict and control the terrestrial ecosystem in order to achieve desirable outcomes (e.g., bioenergy production, crop yield maximization, and soilbased carbon sequestration). Application of multi-omics has the potential to significantly advance our knowledge of rhizospheric science. This review covers: cutting- and bleeding-edge, multi-omic techniques and technologies; methods and protocols for specific rhizospheric science questions; and, challenges to be addressed during this century of rhizospheric science.

  4. The WEST project: Testing ITER divertor high heat flux component technology in a steady state tokamak environment

    Energy Technology Data Exchange (ETDEWEB)

    Bucalossi, J., E-mail: jerome.bucalossi@cea.fr; Missirlian, M.; Moreau, P.; Samaille, F.; Tsitrone, E.; Houtte, D. van; Batal, T.; Bourdelle, C.; Chantant, M.; Corre, Y.; Courtois, X.; Delpech, L.; Doceul, L.; Douai, D.; Dougnac, H.; Faïsse, F.; Fenzi, C.; Ferlay, F.; Firdaouss, M.; Gargiulo, L.; and others

    2014-10-15

    The WEST project recently launched at Cadarache consists in transforming Tore Supra in an X-point divertor configuration while extending its long pulse capability, in order to test the ITER divertor technology. The implementation of a full tungsten actively cooled divertor with plasma facing unit representative of ITER divertor targets will allow addressing risks both in terms of industrial-scale manufacturing and operation of such components. Relevant plasma scenarios are foreseen for extensive testing under high heat load in the 10–20 MW/m{sup 2} range and ITER-like fluences (1000 s pulses). Plasma facing unit monitoring and development of protection strategies will be key elements of the WEST program. WEST is scheduled to enter into operation in 2016, and will provide a key facility to prepare and be prepared for ITER.

  5. Actual principles of the simulation of state-of-the-art technologies of laser processing of materials

    Science.gov (United States)

    Kovalev, Oleg B.

    2011-02-01

    Here we present the results of mathematical, numerical, and experimental simulation of the processes of interaction between the laser radiation and metals in the technologies of gas-laser cutting of thick-sheet materials and laser gas-powder cladding at the production of coatings and 3D objects by the DMD (Direct Material Deposition) method. The peculiarities of jet 3D flows of the working gases in narrow channels, geometrically identical to keyholes, are studied. It is demonstrated that during the stainless steel cutting, supersonic gas flows form local regions of separation flows which in turn result in the worse carry-away of the metal by the gas flow; these factors increase the roughness (striation) and worsen the surface quality. A vortex flow was found inside the cut at the subsonic jet flows typical for the oxygen gas-laser cutting of low-carbon steel; this flow causes slagging of the cut bottom edge. The processes running inside the laser cut at the fusible metals cutting with the low-power radiation were visualized under the laboratory conditions. Some new concepts of the processes running inside the keyhole have been gained; we also propose the explanations of the mechanisms of striation and other surface defects formation during the cutting of thick-sheet standard metals on the automate laser technological complex. A mathematical model of the volumetric laser-powder cladding is proposed. The submitted results concern the numerical simulation of multi-layer flows of shaping and carrier gases with the gas-jet transportation of powder particles into the laser spot on the substrate.

  6. Technology collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Jacob [Halliburton (Brazil)

    2011-07-01

    The aim of this paper is to present Halliburton's Brazilian technology center. Halliburton has technology centers in the United States, Saudi Arabia, India, Singapore and Brazil, all of which aim at delivering accelerated innovation in the oil sector. The technology centers engage in research and development activities with the help of various universities and in collaboration with the customer or supplier. The Halliburton Brazil technology center provides its customers with timely research and development solutions for enhancing recovery and mitigating reservoir uncertainty; they are specialized in finding solutions for pre- and post-salt carbonate drilling and in the enhancement of production from mature fields. This presentation showcased the work carried out by the Halliburton Brazil technology center to help customers develop their deepwater field activities.

  7. Office of Electricity Delivery and Energy Reliability (OE) National Energy Technology Laboratory (NETL) American Recovery and Reinvestment Act 2009 United States Department of Energy

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Mohit [Seeo, Incorporated, Hayward, CA (United States); Grape, Ulrik [Seeo, Incorporated, Hayward, CA (United States)

    2014-07-29

    The purpose of this project was for Seeo to deliver the first ever large-scale or grid-scale prototype of a new class of advanced lithium-ion rechargeable batteries. The technology combines unprecedented energy density, lifetime, safety, and cost. The goal was to demonstrate Seeo’s entirely new class of lithium-based batteries based on Seeo’s proprietary nanostructured polymer electrolyte. This technology can enable the widespread deployment in Smart Grid applications and was demonstrated through the development and testing of a 10 kilowatt-hour (kWh) prototype battery system. This development effort, supported by the United States Department of Energy (DOE) enabled Seeo to pursue and validate the transformational performance advantages of its technology for use in grid-tied energy storage applications. The focus of this project and Seeo’s goal as demonstrated through the efforts made under this project is to address the utility market needs for energy storage systems applications, especially for residential and commercial customers tied to solar photovoltaic installations. In addition to grid energy storage opportunities Seeo’s technology has been tested with automotive drive cycles and is seen as equally applicable for battery packs for electric vehicles. The goals of the project were outlined and achieved through a series of specific tasks, which encompassed materials development, scaling up of cells, demonstrating the performance of the cells, designing, building and demonstrating a pack prototype, and providing an economic and environmental assessment. Nearly all of the tasks were achieved over the duration of the program, with only the full demonstration of the battery system and a complete economic and environmental analysis not able to be fully completed. A timeline over the duration of the program is shown in figure 1.

  8. State and local government liability for failing to use reasonably available information and technology in emergency management

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, A.M.

    1985-01-01

    A range of interlocking liability issues has arisen in recent years in connection with state and local governmental handling of crisis situations. As such authorities strive to anticipate and cope with impending disaster, when advance action is an option, the result of their decisions often directly affects the safety of the citizenry and the degree to which property is protected. In particular, the question of government liability for failing to use available information in fulfillment of its disaster-related responsibilities is explored. 45 references.

  9. State of the art of technologies thermosolar to concentration; Estado del arte de las tecnologias termosolares a concentracion

    Energy Technology Data Exchange (ETDEWEB)

    Ramos Berume, Carlos; Huacuz Villamar, Jorge M; Medrano Vaca, M. Consolacion [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    2000-07-01

    Nowadays Research and Development activities on Solar Thermal Power Generating Systems are supported by some countries around the world. Because of their thermal nature each of these plants can be operated only with solar energy or can be hybridized (solar/fossil fuel) and also with thermal storage systems. These types of solar thermal power plants are: Central Receiver, a circular field of tracking mirrors called helisotats reflects the solar energy onto receiver mounted on top of a central tower. Parabolic Trough, use linear parabolic concentrators to reflect sunlight to a receiver along the focal line (metallic pipe). Inside the pipe solar energy is absorbed in a working fluid with temperatures up to 390 Celsius degrees, which is then piped to a central location to power a conventional steam turbine and Parabolic Dish uses a parabolic dish concentrator to focus solar energy to a receiver and a heat engine/generator, located at the focus of the dish, to generate electrical power. In this document, we present the current status of technologies. A description of market opportunities, cost and technological perspectives are also included. [Spanish] Actualmente la Investigacion and Desarrollo para la generacion de potencia electrica mediante el aprovechamiento de la energia solar por la ruta termodinamica esta siendo apoyada por varios paises. Debido a su naturaleza termica estas pueden operar bajo esquemas de operacion solo con energia solar o en forma de plantas hibridas (solar-combustible fosil) y en algunos casos adaptadas con sistemas de almacenamiento termico. Los tipos de plantas solares de generacion electrica son: Receptor Central (RC), utilizan un campo colector con dispositivos llamados heliostatos arreglados en un campo circular y reflejando la radiacion solar sobre un receptor montado en la parte mas alta de una torre. Canal Parabolica (CP), estas plantas utilizan espejos curvados en forma de una parabola que redirigen los rayos del sol sobre su linea

  10. A state-of-the-art report on design technology of communication network in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Hoon; Seong, Seung Hwan; Jang, Gwi Sook; Koo, In Soo; Lee, Soon Sung

    1996-06-01

    This report describe the technical status of commercial communication network (CCN) and application in NPPs. Communication network (CN) is required for effective information exchanges, enhancement of flexibility, and etc. CCN is developing to the trend of high-reliability, high-speed, standardization and integration. Each design element should be analyzed and evaluated as a portion of integrated design. CN in NPP applications is limited to the information processing and monitoring systems. Communication methods used in safety-related systems is the point-to-point link because of conservative approach to the requirements and verification problems. Chapter 1 discusses the purpose of CN, in chapter 2,the technology of CNN such as topology, protocol, media, inter-networking device, performance, standardization and equipment is described. In chapter 3, the status of application in NPP is analyzed and described regarding to structure and characteristics of CN. In chapter 4, as a conclusion, summary of status and prospect for CN is described. (author). 34 refs., 31 tabs., 6 figs

  11. Modern technologies and methodologies concerning permanent monitoring of position changes and entity state in space and time

    Directory of Open Access Journals (Sweden)

    Zoran Sušić

    2014-06-01

    Full Text Available The topic of the paper is the description of the modern sensor solutions used in the permanent-monitoring projects for deformations of entities in space and time, as well as of many other parameters necessary to a detailed analysis of spatial processes at the sites of large civil-engineering objects. The possibility of applying the monitoring with an alarm system, with a special comment concerning the LeicaGeoMos software, is also mentioned. Using an example of integrated multisensor system (GPS, inclinometers, accelerometers, robotised TS concerning the general solution for observing deformations of the Žeželj bridge (test examination and permanent observation during exploitation in Novi Sad the possibilities of new technologies will be presented and the place, role and importance of a specialist in geodesy in such projects will be indicated. The topic of the paper is an automated system of integrated sensors for measuring meteorological parameters and those of dynamical motions of water at the location of the future marina in the Kotor Bay at Kumbor. On the basis of the presented results of sensor application to the registration of quantities and their spatial and temporal variations new possibilities of geodesy in extension and participation in new services in multidisciplinary projects of other sciences are indicated.

  12. Students’ Perception of the Availability and Utilization of Information and Communication Technology (ICT in the Teaching and Learning of Science Subjects in Secondary Schools in Ekiti State, Nigeria

    Directory of Open Access Journals (Sweden)

    Jegede Samuel Akingbade

    2013-07-01

    Full Text Available The study investigated students’ perception of the availability and utilization of Information and Communication Technology (ICT in the teaching and learning of science subjects in secondary schools in Ekiti State, Nigeria. The population of the study was made up of all secondary school students in public and private secondary schools in Ekiti State, Nigeria. The sample was 400 students selected from both public and private secondary schools in the state using the multi-stage sampling. The only instrument used in collecting relevant data for the study was a questionnaire consisting of two sections A and B. Section A consisted of personal biodata of the respondents, while section B consisted of 22 items which elicited information on the application of ICT in schools for learning science. Four research questions were raised and two hypotheses tested. Data collected were analysed using frequency counts and percentages as well as inferential statistics of t-test. The results showed that apart from the computer, which is available in most schools, the other identified ICT equipment were not available. The findings also showed that there is no significant difference in the availability of ICT facilities in public and private secondary schools, and that students in private schools are more exposed to ICT than their counterparts in public schools.

  13. Ringing in the new physics: The politics and technology of electron colliders in the United States, 1956--1972

    Science.gov (United States)

    Paris, Elizabeth

    The ``November Revolution'' of 1974 and the experiments that followed consolidated the place of the Standard Model in modern particle physics. Much of the evidence on which these conclusions depended was generated by a new type of tool: colliding beam storage rings, which had been considered physically unfeasible twenty years earlier. In 1956 a young experimentalist named Gerry O'Neill dedicated himself to demonstrating that such an apparatus could do useful physics. The storage ring movement encountered numerous obstacles before generating one of the standard machines for high energy research. In fact, it wasn't until 1970 that the U.S. finally broke ground on its first electron-positron collider. Drawing extensively on archival sources and supplementing them with the personal accounts of many of the individuals who took part, Ringing in the New Physics examines this instance of post-World War II techno-science and the new social, political and scientific tensions that characterize it. The motivations are twofold: first, that the chronicle of storage rings may take its place beside mathematical group theory, computer simulations, magnetic spark chambers, and the like as an important contributor to a view of matter and energy which has been the dominant model for the last twenty-five years. In addition, the account provides a case study for the integration of the personal, professional, institutional, and material worlds when examining an episode in the history or sociology of twentieth century science. The story behind the technological development of storage rings holds fascinating insights into the relationship between theory and experiment, collaboration and competition in the physics community, the way scientists obtain funding and their responsibilities to it, and the very nature of what constitutes ``successful'' science in the post- World War II era.

  14. Research of liquid-state polycondensation technology for polyester industrial yarn%涤纶工业丝液相增黏技术的研发

    Institute of Scientific and Technical Information of China (English)

    陈文兴; 马建平; 王建辉; 胡智暄; 高琳

    2013-01-01

    通过比较卧式和立式增黏反应器对聚酯液相增黏反应的影响,自主设计研制了生产能力为29t/d的立式液相增黏反应器;将聚酯切片螺杆加热熔融后的熔体进行增黏反应,探讨了液相增黏工艺条件,并对比分析了液相增黏与固相缩聚后纺制的涤纶工业丝的性能.结果表明:聚酯液相增黏后的熔体特性黏数达1.05 dL/g,6值小于3,端羧基浓度约25 mol/t;增黏后的熔体进行直接纺丝,生产的涤纶工业丝的各项性能指标均能达到固相缩聚熔融纺丝工艺的同等水平,断裂强度为8.33 cN/dtex,断裂伸长率为15.4%;液相增黏技术具有设备投资省、能耗和运行成本低等特点.%The effects of horizontal and vertical polycondensation reactors on polyester liquid-state polycondensation were investigated.A vertical liquid-state polycondensation reactor with the production capacity of 29 t/d was designed and developed,which was used for the polycondensation reaction of polyester chip melt after screw heating and melting.The liquid-state polycon-densation process conditions were discussed.And the properties of polyester industrial yarns were contrasted and analyzed after liquid-state or solid-state polycondensation reaction.The results showed that the melt after liquid-state polycondensation had the intrinsic viscosity up to 1.05 dL/g,b value below 3 and carboxyl end group concentration of 25 mol/t or so; the melt after liquidstate polycondensation was directly spun into polyester industrial yarn with the physical index equal to the yarn prepared by solidstate polycondensation among which the breaking strength was 8.33 cN/dtex and elongation at break 15.4% ; the liquid-state polycondensation technology had the characteristics of low equipment investment,energy consumption and production cost.

  15. The use of radionuclide DNA probe technology for epidemiological studies of tegumentary leishmaniasis in Mato Grosso state

    Directory of Open Access Journals (Sweden)

    Antero Silva Ribeiro de Andrade

    2005-10-01

    Full Text Available DNA hybridisation, using probes labelled with 32P, was used to type Leishmania samples isolated from patients living in endemic areas of Mato Grosso State (Brazil, and clinically diagnosed as having tegumentary leishmaniasis. kDNA cloned mini-circle probes specific for the Leishmania mexicana and Leishmania braziliensis complexes were used. The results showed that L. braziliensis is the predominant group infecting human patients in the state. Sixty-eight samples were typed, 64 samples (94.1% belonging to the L. braziliensis complex and only four (5.9% belonging to the L. mexicana complex. Accurate identification of the Leishmania permits better orientation of the medical follow-up, since clinical manifestations may vary depending on the complex to which the parasite belongs. The epidemiological information furnished by the identification of the Leishmania in given endemic area is also essential for the design of appropriate control measuresHibridização, utilizando sondas de DNA marcadas com 32P, foi utilizada para a tipagem de amostras de Leishmania isoladas de pacientes do estado do Mato Grosso (Brasil, diagnosticados clinicamente como portadores de leishmaniose tegumentar. Sondas de minicírculos clonados de kDNA, específicas para os complexos Leishmania mexicana e Leishmania braziliensis, foram utilizadas. Os resultados demonstraram que o complexo L. brasiliensis é o grupo predominante infectando pacientes humanos no estado do Mato Grosso. Foram tipadas 68 amostras: 64 (94,1% foram identificadas como pertencentes ao complexo L. brasiliensis e somente 4 (5,9% como pertencentes ao complexo L. mexicana. A tipagem de Leishmania é importante para um melhor acompanhamento médico, uma vez que as manifestações clínicas podem variar em função do complexo ao qual o parasita pertence. A informação fornecida pela identificação também é essencial para a definição das medidas de controle mais adequadas e compreensão da epidemiologia da

  16. The Use of Geographic Information Technologies in Environmental Decision-Making in the State of Michoacan, Mexico

    Science.gov (United States)

    Teodoro, Silva García José; Gustavo, Cruz Cárdenas; Salvador, Ochoa Estrada; Franciso, Estrada Godoy; Fabian, Villalpando Barragán

    2008-05-01

    One of the most urgent issues facing the human environment, a result of current human evolution is the increase in the production of Urban Solid Waste (USW). The State of Michoacán is no exception; the presence of waste facilities in the area is a very big problem and one with a strong geographical content (Mena et al., 2006). SIGs are one tool for addressing this kind of need. A model which has been commonly used for selecting areas for the final deposit of USW, and which has obtained good results, is so-called multicriterion decision-making. It has been applied in the context of integral USW management, and has generated both a methodology for the determination of safe places for final waste deposit and an Environmental Risk Index (ERI), which fulfills the requirements indicated by the Official Mexican Norm (NOM-083-SEMARNAT-2003). The methodology consists of a quadrant analysis of 25 ha of five factors. A rank was assigned to each of the factors, and this rank was standardized according to a scale from 0 to 10 and subsequently multiplied by a weight (W) which numerically represents the degree of importance and influence of each factor in the environment. Five represented the largest impact, and two represented the smallest impact. The ERI is the sum of the five factors considered and it is represented by means of the following equation: ERI = VVw+UsUsw+FrFrw+ln lnw+Zi Ziw, where ERI is the Environmental Risk Index, V Vw is the aquifer vulnerability, Us Usw represents the use of the soil, Fr Frw refers to the fracturing density, ln lnw represents the domain of the urban and industrial infrastructure, and Zi Ziw refers to flood zones. This was shown to be successful in different regions of Michoacán State, such as the Bajío area, the Paísde la Mariposa Monarca and Tierra Caliente. Another example is its application in the hydrogeologic context, which generated the Aquifer Veda index (a restriction diagram for the opening of new exploitations), and which is

  17. Endoscopic ultrasound for the characterization and staging of rectal cancer. Current state of the method. Technological advances and perspectives.

    Science.gov (United States)

    Gersak, Mariana M; Badea, Radu; Graur, Florin; Hajja, Nadim Al; Furcea, Luminita; Dudea, Sorin M

    2015-06-01

    Endoscopic ultrasound is the most accurate type of examination for the assessment of rectal tumors. Over the years, the method has advanced from gray-scale examination to intravenous contrast media administration and to different types of elastography. The multimodal approach of tumors (transrectal, transvaginal) is adapted to each case. 3D ultrasound is useful for spatial representation and precise measurement of tumor formations, using CT/MR image reconstruction; color elastography is useful for tumor characterization and staging; endoscopic ultrasound using intravenous contrast agents can help study the amount of contrast agent targeted at the level of the tumor formations and contrast wash-in/wash-out time, based on the curves displayed on the device. The transvaginal approach often allows better visualization of the tumor than the transrectal approach. Performing the procedure with the rectal ampulla distended with contrast agent may be seen as an optimization of the examination methodology. All these aspects are additional methods for gray-scale endoscopic ultrasound, capable of increasing diagnostic accuracy. This paper aims at reviewing the progress of transrectal and transvaginal ultrasound, generically called endoscopic ultrasound, for rectal tumor diagnosis and staging, with emphasis on the current state of the method and its development trends.

  18. [Quality of life, work management, and career planning as a primary care technology in the Unified National Health System in São Paulo State, Brazil].

    Science.gov (United States)

    Lacaz, Francisco Antonio de Castro; Vieira, Nelson Passagem; Cortizo, Carlos Tato; Junqueira, Virgínia; dos Santos, Ana Paula Lopes; Santos, Fabio Souza

    2010-02-01

    This article discusses the concept of quality of life in and at work, linked to health work management based on the evaluation of a work management instrument: the Career, Job, and Wage Plan. The aim was to analyze the plan as a work management technology in primary care in the Unified National Health System (SUS). The article discusses the plan in three municipalities in São Paulo State, Brazil: São Paulo, Guarulhos, and Campinas, in compliance with guidelines issued by the National Health Council in 2006, and using a qualitative survey conducted in 2007-2008. The study presents the findings from research in eight municipalities, based on interviews with managers, users (represented by Health Councils), and health workers and health sector trade unionists. The article concludes that this is still an incipient public management policy issue, with limited command by users, trade unionists, and health workers in the target municipalities, heavily populated 'hub cities' in the health regions.

  19. IEA Wind Task 26. Wind Technology, Cost and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States. 2007 - 2012

    Energy Technology Data Exchange (ETDEWEB)

    Vitina, Aisma [Ea Energy Analyses, Copenhagen (Denmark); Luers, Silke [Deutsche WindGuard, Varel (Germany); Wallasch, Anna-Kathrin [Deutsche WindGuard, Varel (Germany); Berkhout, Volker [Fraunhofer IWES (Germany); Duffy, Aidan [Dublin Inst. of Technology and Dublin Energy Lab (Ireland); Cleary, Brendan [Dublin Inst. of Technology and Dublin Energy Lab (Ireland); Husabo, Leif I. [Norwegian Water Resources and Energy Directorate (NVE), Oslo (Norway); Weir, David E. [Norwegian Water Resources and Energy Directorate (NVE), Oslo (Norway); Lacal-Arantegui, Roberto [European Commission, Ispra (Italy). Joint Research Centre; Hand, M. Maureen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lantz, Eric [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Belyeu, Kathy [Belyeu Consulting, Tacoma Park, MD (United States); Wiser, Ryan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bolinger, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hoen, Ben [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-06-12

    This report builds from a similar previous analysis (Schwabe et al., 2011) exploring the differences in cost of wind energy in 2008 among countries participating in IEA Wind Task 26 at that time. The levelized cost of energy (LCOE) is a widely recognized metric for understanding how technology, capital investment, operations, and financing impact the life-cycle cost of building and operating a wind plant. Schwabe et al. (2011) apply a spreadsheet-based cash flow model developed by the Energy Research Centre of the Netherlands (ECN) to estimate LCOE. This model is a detailed, discounted cash flow model used to represent the various cost structures in each of the participating countries from the perspective of a financial investor in a domestic wind energy project. This model is used for the present analysis as well, and comparisons are made for those countries who contributed to both reports, Denmark, Germany, and the United States.

  20. Giving Voice to Emotion: Voice Analysis Technology Uncovering Mental States is Playing a Growing Role in Medicine, Business, and Law Enforcement.

    Science.gov (United States)

    Allen, Summer

    2016-01-01

    It's tough to imagine anything more frustrating than interacting with a call center. Generally, people don't reach out to call centers when they?re happy-they're usually trying to get help with a problem or gearing up to do battle over a billing error. Add in an automatic phone tree, and you have a recipe for annoyance. But what if that robotic voice offering you a smorgasbord of numbered choices could tell that you were frustrated and then funnel you to an actual human being? This type of voice analysis technology exists, and it's just one example of the many ways that computers can use your voice to extract information about your mental and emotional state-including information you may not think of as being accessible through your voice alone.

  1. Evaluation of low-cadmium ZnCdSeS alloyed quantum dots for remote phosphor solid-state lighting technology.

    Science.gov (United States)

    Siffalovic, Peter; Badanova, Dominika; Vojtko, Andrej; Jergel, Matej; Hodas, Martin; Pelletta, Marco; Sabol, Dusan; Macha, Marek; Majkova, Eva

    2015-08-10

    We report on the possibility to enhance color rendering of commercially available remote phosphor light-emitting diode modules by using low-cadmium content ZnCdSeS alloyed quantum dots. The employed numerical simulations showed that the color-rendering index of 90+ at the color-correlated temperature of 3200 K can be achieved by application of a single layer of quantum dots onto a neutral-white remote phosphor substrate. The experimental results fully support the numerical calculations, thus revealing the only limiting factor in achieving a higher photometric performance: the self-absorption effect in quantum dots. The presented low-cadmium content quantum dots allow a price-effective upgrade of already existing remote phosphor solid-state lighting technology toward a higher color-rendering capability.

  2. 电气设备状态检修技术探讨%Investigation of the Technology in Electrical State Maintenance

    Institute of Scientific and Technical Information of China (English)

    刘齐贵; 任正清

    2012-01-01

    指出了电气设备检修是保证电力系统正常安全运行的必要手段,结合多年的探索和运行实践,对变电站状态检修进行了研究分析,探讨了变电站状态检修的应用。%This paper introduces that the electrical equipment maintenance is a necessary m the years of exean to ensure that the electric power system be well done. Based onploration and practical experience, this article analyses the technology of the electrical state maintenance, describes the application in the maintenance of transformer substation.

  3. 美国、加拿大与澳大利亚的卫生技术评估%Health Technology Assessment in United States, Canada and Australia

    Institute of Scientific and Technical Information of China (English)

    徐文煜; 薛迪

    2011-01-01

    以美国、加拿大和澳大利亚为例,回顾了卫生技术评估发展历史、体系结构、参与各方以及对于卫生政策的影响.其对我国卫生技术评估的发展提供了可借鉴的经验.%The United States is historically the first to conduct health technology assessment ( HTA ), and Canada and Australia is the one who performs outstanding HTA in the world. The paper presented the histories of HTA in three countries and their system structures, interest parties and impacts on health policy, which provided inspirations to HTA development in China.

  4. Management strategies on the industrialization road of state-of-the-art technologies for e-waste recycling: the case study of electrostatic separation--a review.

    Science.gov (United States)

    Xue, Mianqiang; Li, Jia; Xu, Zhenming

    2013-02-01

    Electronic waste (e-waste) management is pressing as global production has increased significantly in the past few years and is rising continuously at a fast rate. Many countries are facing hazardous e-waste mountains, most of which are disposed of by backyard recyclers, creating serious threats to public health and ecosystems. Industrialization of state-of-the-art recycling technologies is imperative to enhance the comprehensive utilization of resources and to protect the environment. This article aims to provide an overview of management strategies solving the crucial problems during the process of industrialization. A typical case study of electrostatic separation for recycling waste printed circuit boards was discussed in terms of parameters optimization, materials flow control, noise assessment, risk assessment, economic evaluation and social benefits analysis. The comprehensive view provided by the review could be helpful to the progress of the e-waste recycling industry.

  5. Technology-aided leisure and communication opportunities for two post-coma persons emerged from a minimally conscious state and affected by multiple disabilities.

    Science.gov (United States)

    Lancioni, Giulio E; O'Reilly, Mark F; Singh, Nirbhay N; Sigafoos, Jeff; Buonocunto, Francesca; Sacco, Valentina; Navarro, Jorge; Lanzilotti, Crocifissa; De Tommaso, Marina; Megna, Marisa; Oliva, Doretta

    2013-02-01

    This study assessed technology-aided programs for helping two post-coma persons, who had emerged from a minimally conscious state and were affected by multiple disabilities, to (a) engage with leisure stimuli and request caregiver's procedures, (b) send out and listen to text messages for communication with distant partners, and (c) combine leisure engagement and procedure requests with text messaging within the same sessions. The program for leisure engagement and procedure requests relied on the use of a portable computer with commercial software, and a microswitch for the participants' response. The program for text messaging communication involved the use of a portable computer, a GSM modem, a microswitch for the participants' response, and specifically developed software. Results indicated that the participants were successful at each of the three stages of the study, thus providing relevant evidence concerning performance achievements only minimally documented. The implications of the findings in terms of technology and practical opportunities for post-coma persons with multiple disabilities are discussed.

  6. The United States of America and the People`s Republic of China experts report on integrated gasification combined-cycle technology (IGCC)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    A report written by the leading US and Chinese experts in Integrated Gasification Combined Cycle (IGCC) power plants, intended for high level decision makers, may greatly accelerate the development of an IGCC demonstration project in the People`s Republic of China (PRC). The potential market for IGCC systems in China and the competitiveness of IGCC technology with other clean coal options for China have been analyzed in the report. Such information will be useful not only to the Chinese government but also to US vendors and companies. The goal of this report is to analyze the energy supply structure of China, China`s energy and environmental protection demand, and the potential market in China in order to make a justified and reasonable assessment on feasibility of the transfer of US Clean Coal Technologies to China. The Expert Report was developed and written by the joint US/PRC IGCC experts and will be presented to the State Planning Commission (SPC) by the President of the CAS to ensure consideration of the importance of IGCC for future PRC power production.

  7. Restricting Access to ART on the Basis of Criminal Record : An Ethical Analysis of a State-Enforced "Presumption Against Treatment" With Regard to Assisted Reproductive Technologies.

    Science.gov (United States)

    Thompson, Kara; McDougall, Rosalind

    2015-09-01

    As assisted reproductive technologies (ART) become increasingly popular, debate has intensified over the ethical justification for restricting access to ART based on various medical and non-medical factors. In 2010, the Australian state of Victoria enacted world-first legislation that denies access to ART for all patients with certain criminal or child protection histories. Patients and their partners are identified via a compulsory police and child protection check prior to commencing ART and, if found to have a previous relevant conviction or child protection order, are given a "presumption against treatment." This article reviews the legislation and identifies arguments that may be used to justify restricting access to ART for various reasons. The arguments reviewed include limitations of reproductive rights, inheriting undesirable genetic traits, distributive justice, and the welfare of the future child. We show that none of these arguments justifies restricting access to ART in the context of past criminal history. We show that a "presumption against treatment" is an unjustified infringement on reproductive freedom and that it creates various inconsistencies in current social, medical, and legal policy. We argue that a state-enforced policy of restricting access to ART based on the non-medical factor of past criminal history is an example of unjust discrimination and cannot be ethically justified, with one important exception: in cases where ART treatment may be considered futile on the basis that the parents are not expected to raise the resulting child.

  8. Riparian States

    African Journals Online (AJOL)

    Kenya, the rest of the Nile River riparian countries fall in the category of least developed ... state econo-political and socio-cultural utilisation remains a major challenge. .... Nyukuri, African Centre for Technology Studies (ACTS), Kenya.

  9. Visit of Dr Stahl, Secretary of State, Federal Ministry for Education Science, Research and Technology, Germany, accompanied by MinDirig Dr Eschelbacher and MinR Dr Freytag

    CERN Document Server

    Laurent Guiraud

    1998-01-01

    Visiting CERN on 19 January was Helmut Stahl, Secretary of State of the German Federal Ministry of Science, Education, Research and Technology (centre) seen here admiring prototype magnets for CERN's LHC proton collider with new President of CERN Council Hans Eschelbacher (right) and German delegate to CERN Council Arno Freytag. In the background is Dietrich Gusewell, Head of CERN's EST (Engineering Support and Technologies) Division.

  10. Final report on grand challenge LDRD project : a revolution in lighting : building the science and technology base for ultra-efficient solid-state lighting.

    Energy Technology Data Exchange (ETDEWEB)

    Copeland, Robert Guild; Mitchell, Christine Charlotte; Follstaedt, David Martin; Lee, Stephen Roger; Shul, Randy John; Fischer, Arthur Joseph; Chow, Weng Wah Dr.; Myers, Samuel Maxwell, Jr.; Thoma, Steven George; Gee, James Martin; Coltrin, Michael Elliott; Burdick, Brent A.; Salamone, Angelo, L., Jr.; Hadley, G. Ronald; Elliott, Russell D.; Campbell, Jonathan M.; Abrams, Billie Lynn; Wendt, Joel Robert; Pawlowski, Roger Patrick; Simpson, Regina Lynn; Kurtz, Steven Ross; Cole, Phillip James; Fullmer, Kristine Wanta; Seager, Carleton Hoover; Bogart, Katherine Huderle Andersen; Biefeld, Robert Malcolm; Kerley, Thomas M.; Norman, Adam K.; Tallant, David Robert; Woessner, Stephen Matthew; Figiel, Jeffrey James; Moffat, Harry K.; Provencio, Paula Polyak; Emerson, John Allen; Kaplar, Robert James; Wilcoxon, Jess Patrick; Waldrip, Karen Elizabeth; Rohwer, Lauren Elizabeth Shea; Cross, Karen Charlene; Wright, Alan Francis; Gonzales, Rene Marie; Salinger, Andrew Gerhard; Crawford, Mary Hagerott; Garcia, Marie L.; Allen, Mark S.; Southwell, Edwin T. (Perspectives, Sedona, AZ); Bauer, Tom M.; Monson, Mary Ann; Tsao, Jeffrey Yeenien; Creighton, James Randall; Allerman, Andrew Alan; Simmons, Jerry A.; Boyack, Kevin W.; Jones, Eric Daniel; Moran, Michael P.; Pinzon, Marcia J. (Perspectives, Sedona, AZ); Pinson, Ariane O. (Perspectives, Sedona, AZ); Miksovic, Ann E. (Perspectives, Sedona, AZ); Wang, George T.; Ashby, Carol Iris Hill; Missert, Nancy A.; Koleske, Daniel David; Rahal, Nabeel M.

    2004-06-01

    This SAND report is the final report on Sandia's Grand Challenge LDRD Project 27328, 'A Revolution in Lighting -- Building the Science and Technology Base for Ultra-Efficient Solid-state Lighting.' This project, which for brevity we refer to as the SSL GCLDRD, is considered one of Sandia's most successful GCLDRDs. As a result, this report reviews not only technical highlights, but also the genesis of the idea for Solid-state Lighting (SSL), the initiation of the SSL GCLDRD, and the goals, scope, success metrics, and evolution of the SSL GCLDRD over the course of its life. One way in which the SSL GCLDRD was different from other GCLDRDs was that it coincided with a larger effort by the SSL community - primarily industrial companies investing in SSL, but also universities, trade organizations, and other Department of Energy (DOE) national laboratories - to support a national initiative in SSL R&D. Sandia was a major player in publicizing the tremendous energy savings potential of SSL, and in helping to develop, unify and support community consensus for such an initiative. Hence, our activities in this area, discussed in Chapter 6, were substantial: white papers; SSL technology workshops and roadmaps; support for the Optoelectronics Industry Development Association (OIDA), DOE and Senator Bingaman's office; extensive public relations and media activities; and a worldwide SSL community website. Many science and technology advances and breakthroughs were also enabled under this GCLDRD, resulting in: 55 publications; 124 presentations; 10 book chapters and reports; 5 U.S. patent applications including 1 already issued; and 14 patent disclosures not yet applied for. Twenty-six invited talks were given, at prestigious venues such as the American Physical Society Meeting, the Materials Research Society Meeting, the AVS International Symposium, and the Electrochemical Society Meeting. This report contains a summary of these science and technology

  11. H.R. 2875: A Bill to promote the industrial competitiveness and economic growth of the United States by strengthening the linkages between the laboratories of the Department of Energy and the private sector and by supporting the development and application of technologies critical to the economic, scientific and technological competitiveness of the United States, and for other purposes. Introduced in the House of Representatives, One Hundred Third Congress, First Session, August 4, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The report H.R. 2875 is a bill to promote the industrial competitiveness and economic growth of the United States (U.S.) by strengthening the linkages between the laboratories of the Department of Energy and the private sector and by supporting the development and application of technologies critical to the economic, scientific and technological competitiveness of the U.S. The proposed legislative text is included.

  12. State-of-art of the wireless charging technologies for electric vehicles%电动汽车无线充电技术的研究进展

    Institute of Scientific and Technical Information of China (English)

    高大威; 王硕; 杨福源

    2015-01-01

    As one of contactless electric power transfer technologies for electric-vehicle (EV) charging, the Wireless Charging Technology (WCT) has the highlights of high safety, inteligent operation, lfexible conifgurations, etc. This paper reviewed the technical architecture, categories and features for EV WCT. The state-of-art of several hot issues were summarized, including power electronic topologies, coupler structures, power transfer levels, modeling approaches, biosafety, etc., and practical achievements of the relative automotive enterprises and laboratories were also concluded. The future technical developing trends for this technology include the innovation and optimization of power electronics topologies and control algorithms, the biosafety and the utilization of new materials, etc., and the applicative trends cover the on-line wireless charging, assistant driving, V2X((Vehicle-to-Grid, V2G), (Vehicle-to-Home, V2H), etc.) bidirectional power transfer, etc.%电动汽车无线充电技术(WCT)是一种应用于电动汽车充电的非直接接触式电能传输技术,具有运行安全﹑充电智能﹑配置灵活等优点。本文对电动汽车无线充电技术体系﹑类别与技术特点进行了综述。其研究热点包括:电力电子拓扑结构﹑磁耦合元件结构﹑能量传输水平﹑建模思路﹑生物安全等,对上述热点问题研究进展进行了汇总。概述了相关汽车企业与实验室的实用化成果。该技术未来发展趋势包括:电力电子拓扑结构与控制算法的创新与优化﹑生物安全以及新材料应用等,而应用趋势则包括:行进状态充电﹑辅助驾驶和V2X(车辆到电网(Vehicle-to-Grid, V2G)﹑车辆到住宅(Vehicle-to-Home, V2H)等)双向电能传输等。

  13. Fabrication Technology

    Energy Technology Data Exchange (ETDEWEB)

    Blaedel, K.L.

    1993-03-01

    The mission of the Fabrication Technology thrust area is to have an adequate base of manufacturing technology, not necessarily resident at Lawrence Livermore National Laboratory (LLNL), to conduct the future business of LLNL. The specific goals continue to be to (1) develop an understanding of fundamental fabrication processes; (2) construct general purpose process models that will have wide applicability; (3) document findings and models in journals; (4) transfer technology to LLNL programs, industry, and colleagues; and (5) develop continuing relationships with the industrial and academic communities to advance the collective understanding of fabrication processes. The strategy to ensure success is changing. For technologies in which they are expert and which will continue to be of future importance to LLNL, they can often attract outside resources both to maintain their expertise by applying it to a specific problem and to help fund further development. A popular vehicle to fund such work is the Cooperative Research and Development Agreement with industry. For technologies needing development because of their future critical importance and in which they are not expert, they use internal funding sources. These latter are the topics of the thrust area. Three FY-92 funded projects are discussed in this section. Each project clearly moves the Fabrication Technology thrust area towards the goals outlined above. They have also continued their membership in the North Carolina State University Precision Engineering Center, a multidisciplinary research and graduate program established to provide the new technologies needed by high-technology institutions in the US. As members, they have access to and use of the results of their research projects, many of which parallel the precision engineering efforts at LLNL.

  14. Fabrication Technology

    Energy Technology Data Exchange (ETDEWEB)

    Blaedel, K.L.

    1993-03-01

    The mission of the Fabrication Technology thrust area is to have an adequate base of manufacturing technology, not necessarily resident at Lawrence Livermore National Laboratory (LLNL), to conduct the future business of LLNL. The specific goals continue to be to (1) develop an understanding of fundamental fabrication processes; (2) construct general purpose process models that will have wide applicability; (3) document findings and models in journals; (4) transfer technology to LLNL programs, industry, and colleagues; and (5) develop continuing relationships with the industrial and academic communities to advance the collective understanding of fabrication processes. The strategy to ensure success is changing. For technologies in which they are expert and which will continue to be of future importance to LLNL, they can often attract outside resources both to maintain their expertise by applying it to a specific problem and to help fund further development. A popular vehicle to fund such work is the Cooperative Research and Development Agreement with industry. For technologies needing development because of their future critical importance and in which they are not expert, they use internal funding sources. These latter are the topics of the thrust area. Three FY-92 funded projects are discussed in this section. Each project clearly moves the Fabrication Technology thrust area towards the goals outlined above. They have also continued their membership in the North Carolina State University Precision Engineering Center, a multidisciplinary research and graduate program established to provide the new technologies needed by high-technology institutions in the US. As members, they have access to and use of the results of their research projects, many of which parallel the precision engineering efforts at LLNL.

  15. Micro-hybrid electric vehicle application of valve-regulated lead-acid batteries in absorbent glass mat technology: Testing a partial-state-of-charge operation strategy

    Science.gov (United States)

    Schaeck, S.; Stoermer, A. O.; Hockgeiger, E.

    The BMW Group has launched two micro-hybrid functions in high volume models in order to contribute to reduction of fuel consumption in modern passenger cars. Both the brake energy regeneration (BER) and the auto-start-stop function (ASSF) are based on the conventional 14 V vehicle electrical system and current series components with only little modifications. An intelligent control algorithm of the alternator enables recuperative charging in braking and coasting phases, known as BER. By switching off the internal combustion engine at a vehicle standstill the idling fuel consumption is effectively reduced by ASSF. By reason of economy and package a lead-acid battery is used as electrochemical energy storage device. The BMW Group assembles valve-regulated lead-acid (VRLA) batteries in absorbent glass mat (AGM) technology in the micro-hybrid electrical power system since special challenges arise for the batteries. By field data analysis a lower average state-of-charge (SOC) due to partial state-of-charge (PSOC) operation and a higher cycling rate due to BER and ASSF are confirmed in this article. Similar to a design of experiment (DOE) like method we present a long-term lab investigation. Two types of 90 Ah VRLA AGM batteries are operated with a test bench profile that simulates the micro-hybrid vehicle electrical system under varying conditions. The main attention of this lab testing is focused on capacity loss and charge acceptance over cycle life. These effects are put into context with periodically refresh charging the batteries in order to prevent accelerated battery aging due to hard sulfation. We demonstrate the positive effect of refresh chargings concerning preservation of battery charge acceptance. Furthermore, we observe moderate capacity loss over 90 full cycles both at 25 °C and at 3 °C battery temperature.

  16. The relationship of document and quantitative literacy with learning styles and selected personal variables for aerospace technology students at Indiana State University

    Science.gov (United States)

    Martin, Royce Ann

    The purpose of this study was to determine the extent that student scores on a researcher-constructed quantitative and document literacy test, the Aviation Documents Delineator (ADD), were associated with (a) learning styles (imaginative, analytic, common sense, dynamic, and undetermined), as identified by the Learning Type Measure, (b) program curriculum (aerospace administration, professional pilot, both aerospace administration and professional pilot, other, or undeclared), (c) overall cumulative grade point average at Indiana State University, and (d) year in school (freshman, sophomore, junior, or senior). The Aviation Documents Delineator (ADD) was a three-part, 35 question survey that required students to interpret graphs, tables, and maps. Tasks assessed in the ADD included (a) locating, interpreting, and describing specific data displayed in the document, (b) determining data for a specified point on the table through interpolation, (c) comparing data for a string of variables representing one aspect of aircraft performance to another string of variables representing a different aspect of aircraft performance, (d) interpreting the documents to make decisions regarding emergency situations, and (e) performing single and/or sequential mathematical operations on a specified set of data. The Learning Type Measure (LTM) was a 15 item self-report survey developed by Bernice McCarthy (1995) to profile an individual's processing and perception tendencies in order to reveal different individual approaches to learning. The sample used in this study included 143 students enrolled in Aerospace Technology Department courses at Indiana State University in the fall of 1996. The ADD and the LTM were administered to each subject. Data collected in this investigation were analyzed using a stepwise multiple regression analysis technique. Results of the study revealed that the variables, year in school and GPA, were significant predictors of the criterion variables, document

  17. An Online Student Research Institute Designed to Engage Students in Original Scientific Research Using State of the Art Technologies to Increase Participation in STEM Fields

    Science.gov (United States)

    Freed, R.

    2015-12-01

    Affordable and accessible technology has advanced tremendously in the last decade allowing educational paradigms to change dramatically to more student-centered, experiential and project-based models. Additionally, as the need to increase the number of students entering STEM fields in the United States becomes more critical it is imperative to understand the factors that determine student career pathways and to provide opportunities for students to experience, understand and pursue scientific endeavors. The Institute for Student Astronomical Research was founded in order to provide a means for high school and early undergraduate students to engage in meaningful and relevant scientific research. A major goal is to give students the experience of true-to-life scientific investigation from the planning and proposal stages to the data collection and analysis, writing up and presenting of scientific findings and finally to the publication of results. Furthermore, the Institute is designed to collect data on how involvement in the Science Research Seminars influences educational and career choices for students in longitudinal studies following participants for several years. In the first year of the online course of the Institute 10 student teams conducted original research and published their findings in peer-reviewed journals. Lessons learned from the pilot year are being applied to the Institute as efforts to scale up the program are underway.

  18. Integration of NASA Research into Undergraduate Education in Math, Science, Engineering and Technology at North Carolina A&T State University

    Science.gov (United States)

    Monroe, Joseph; Kelkar, Ajit

    2003-01-01

    The NASA PAIR program incorporated the NASA-Sponsored research into the undergraduate environment at North Carolina Agricultural and Technical State University. This program is designed to significantly improve undergraduate education in the areas of mathematics, science, engineering, and technology (MSET) by directly benefiting from the experiences of NASA field centers, affiliated industrial partners and academic institutions. The three basic goals of the program were enhancing core courses in MSET curriculum, upgrading core-engineering laboratories to compliment upgraded MSET curriculum, and conduct research training for undergraduates in MSET disciplines through a sophomore shadow program and through Research Experience for Undergraduates (REU) programs. Since the inception of the program nine courses have been modified to include NASA related topics and research. These courses have impacted over 900 students in the first three years of the program. The Electrical Engineering circuit's lab is completely re-equipped to include Computer controlled and data acquisition equipment. The Physics lab is upgraded to implement better sensory data acquisition to enhance students understanding of course concepts. In addition a new instrumentation laboratory in the department of Mechanical Engineering is developed. Research training for A&T students was conducted through four different programs: Apprentice program, Developers program, Sophomore Shadow program and Independent Research program. These programs provided opportunities for an average of forty students per semester.

  19. ORGANIZATIONAL CHANGE AND COMMUNICATION IN QUALITY SERVICE IMPROVEMENT FOR USERS OF THE INFORMATION TECHNOLOGY AT THE STATE SECRETARIAT OF FINANCE OF PERNAMBUCO

    Directory of Open Access Journals (Sweden)

    Clara Emilie Boeckmann

    2007-01-01

    Full Text Available The State Secretariat of Finance of Pernambuco (SEFAZ, has developed since 1997 an extensive program of modernization, mainly concerning Information Technology (IT, encompassing in its Management Model, the organizational changes that place serious challenges to the management of IT inside SEFAZ, especially regarding the users support. This work has had as main objectives, to identify and to evaluate the existing difficulties concerning IT at SEFAZ, concentrating attention on the users support, focusing the problems in the context of the organizational change and organizational communication. A questionnaire was applied to 120 employees. The results indicated positive scenes of the relation between the users and the IT structure, the satisfaction related to the majority of the evaluated items, including positive pointers of 100%. However, although 92% recognize that IT is very important in the accomplishment of their activities, 68% do not know about the modernization of the change processes, making the process of IT adaptation a difficult task. A plan of management to the users support must be elaborated, including resources that promote a new culture of internal communication and strategies of the organizational change.

  20. State of the art and taxonomy of prognostics approaches, trends of prognostics applications and open issues towards maturity at different technology readiness levels

    Science.gov (United States)

    Javed, Kamran; Gouriveau, Rafael; Zerhouni, Noureddine

    2017-09-01

    Integrating prognostics to a real application requires a certain maturity level and for this reason there is a lack of success stories about development of a complete Prognostics and Health Management system. In fact, the maturity of prognostics is closely linked to data and domain specific entities like modeling. Basically, prognostics task aims at predicting the degradation of engineering assets. However, practically it is not possible to precisely predict the impending failure, which requires a thorough understanding to encounter different sources of uncertainty that affect prognostics. Therefore, different aspects crucial to the prognostics framework, i.e., from monitoring data to remaining useful life of equipment need to be addressed. To this aim, the paper contributes to state of the art and taxonomy of prognostics approaches and their application perspectives. In addition, factors for prognostics approach selection are identified, and new case studies from component-system level are discussed. Moreover, open challenges toward maturity of the prognostics under uncertainty are highlighted and scheme for an efficient prognostics approach is presented. Finally, the existing challenges for verification and validation of prognostics at different technology readiness levels are discussed with respect to open challenges.

  1. State-of-the-art of non-destructive testing methods and technologies for application to nuclear power plant safety-related concrete structures

    Energy Technology Data Exchange (ETDEWEB)

    Wiggenhauser, Herbert [BAM - Federal Institute for Materials Research and Testing, Berlin, D (Germany); Naus, Dan J. [Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    2014-02-18

    The inspection of nuclear power plant concrete structures presents challenges different from conventional civil engineering structures. Wall thicknesses can be in excess of one meter and the structures often have increased steel reinforcement density with more complex detailing. The accessibility for any testing method may be limited due to the presence of liners and other components and there can be a number of penetrations or cast-in-place items present. The objective of the report is to present the state-of-the art of non-destructive testing methods and technologies for the inspection of thick, heavily-reinforced nuclear power plant concrete cross-sections with particular respect to: •locating steel reinforcement and identification of its cover depth •locating tendon ducts and identification of the condition of the grout materials •detection of cracking, voids, delamination, and honeycombing in concrete structures •detection of inclusions of different materials or voids adjacent to the concrete side of the containment liner •methods capable of identification of corrosion occurrence on the concrete side of the containment liner.

  2. State-of-the-Art of Non-Destructive Testing Methods and Technologies for Application to Nuclear Power Plant Safety-Related Concrete Structures

    Energy Technology Data Exchange (ETDEWEB)

    Wiggenhauser, Dr. Herbert [Federal Institute for Materials Research and Testing (BAM); Naus, Dan J [ORNL

    2014-01-01

    The inspection of nuclear power plant concrete structures presents challenges different from conventional civil engineering structures. Wall thicknesses can be in excess of one meter and the structures often have increased steel reinforcement density with more complex detailing. The accessibility for any testing method may be limited due to the presence of liners and other components and there can be a number of penetrations or cast-in-place items present. The objective of the report is to present the state-of-the art of non-destructive testing methods and technologies for the inspection of thick, heavily-reinforced nuclear power plant concrete cross-sections with particular respect to: locating steel reinforcement and identification of its cover depth locating tendon ducts and identification of the condition of the grout materials detection of cracking, voids, delamination, and honeycombing in concrete structures detection of inclusions of different materials or voids adjacent to the concrete side of the containment liner methods capable of identification of corrosion occurrence on the concrete side of the containment liner

  3. THE ESTIMATION OF SOME CHANGES OF SOIL PHYSICAL STATE UNDER THE EFFECT OF LAND RECLAMATION TECHNOLOGIES, IN THE CONDITION OF SUBSURFACE DRAINAGE IN BAIA-MOLDOVA DEPPRESSION

    Directory of Open Access Journals (Sweden)

    V. Moca

    2006-10-01

    Full Text Available In the pedo-climatic conditions of Suceava County that extends on a total surface of 855 300 ha, the balance of agricultural land affected by humidity excess with temporar or permanent character is differenciated from south to north and from east to west, between 30 % till 40%, which means almost 100 000 ha. On these soils with underground water or pluvial excess hydro ameliorative drainage systems have been installed, associated to a complex agroameliorative works. For long effect estimation of the underground drainage asociated with the agropedoameliorative works upon the some physical and hydrophysical characteristics, there were analyzed the soil and the environment conditions from Baia field. For this reason, we analyzed the agrophysical conditions for luvisol albic pseudogleic (SRCS-1980, respectively luvosol albic stagnic-glosic (SRTS-2003 albic luvosoil drained and cultivated, after a period of 28 years (1978-2006 use. The obtained data regarding to te water balance and the evolution of the major physical properties of soil, under the influence of drainage and amelioration works, put into evidence in the first stage (1978-1986 a general improvement of the aerohidrycal state and physical-chemical conditioning. In the next two experimental cycles of 10 years each, have been noticed a increased of compaction degree of soil drained and cultivated on 0-30 cm depth, from weak loose to moderately compaction depending on the remanence of the reclamation technologies.

  4. Introduction of the hybcell-based compact sequencing technology and comparison to state-of-the-art methodologies for KRAS mutation detection.

    Science.gov (United States)

    Zopf, Agnes; Raim, Roman; Danzer, Martin; Niklas, Norbert; Spilka, Rita; Pröll, Johannes; Gabriel, Christian; Nechansky, Andreas; Roucka, Markus

    2015-03-01

    The detection of KRAS mutations in codons 12 and 13 is critical for anti-EGFR therapy strategies; however, only those methodologies with high sensitivity, specificity, and accuracy as well as the best cost and turnaround balance are suitable for routine daily testing. Here we compared the performance of compact sequencing using the novel hybcell technology with 454 next-generation sequencing (454-NGS), Sanger sequencing, and pyrosequencing, using an evaluation panel of 35 specimens. A total of 32 mutations and 10 wild-type cases were reported using 454-NGS as the reference method. Specificity ranged from 100% for Sanger sequencing to 80% for pyrosequencing. Sanger sequencing and hybcell-based compact sequencing achieved a sensitivity of 96%, whereas pyrosequencing had a sensitivity of 88%. Accuracy was 97% for Sanger sequencing, 85% for pyrosequencing, and 94% for hybcell-based compact sequencing. Quantitative results were obtained for 454-NGS and hybcell-based compact sequencing data, resulting in a significant correlation (r = 0.914). Whereas pyrosequencing and Sanger sequencing were not able to detect multiple mutated cell clones within one tumor specimen, 454-NGS and the hybcell-based compact sequencing detected multiple mutations in two specimens. Our comparison shows that the hybcell-based compact sequencing is a valuable alternative to state-of-the-art methodologies used for detection of clinically relevant point mutations.

  5. Factors Influencing the Use of Information and Communication Technology (ICT) in Teaching and Learning Computer Studies in Ohaukwu Local Government Area of Ebonyi State-Nigeria

    Science.gov (United States)

    Agbo, Igwe Sylvester

    2015-01-01

    Research studies in the past years show that Information and Communication Technology is an effective means for boasting educational opportunities, but most teachers neither use this technology as an instructional delivery system nor integrate technology into their curriculum. Studies reveal a number of factors influencing teachers' decisions to…

  6. Learning from our global competitors: A comparative analysis of science, technology, engineering and mathematics (STEM) education pipelines in the United States, Mainland China and Taiwan

    Science.gov (United States)

    Chow, Christina M.

    Maintaining a competitive edge within the 21st century is dependent on the cultivation of human capital, producing qualified and innovative employees capable of competing within the new global marketplace. Technological advancements in communications technology as well as large scale, infrastructure development has led to a leveled playing field where students in the U.S. will ultimately be competing for jobs with not only local, but also international, peers. Thus, the ability to understand and learn from our global competitors, starting with the examination of innovative education systems and best practice strategies, is tantamount to the economic development, and ultimate survival, of the U.S. as a whole. The purpose of this study was to investigate the current state of science, technology, engineering and mathematics (STEM) education and workforce pipelines in the U.S., China, and Taiwan. Two broad research questions examined STEM workforce production in terms of a) structural differences in primary and secondary school systems, including analysis of minimum high school graduation requirements and assessments as well as b) organizational differences in tertiary education and trends in STEM undergraduate and graduate degrees awarded in each region of interest. While each of the systems studied had their relative strengths and weaknesses, each of the Asian economies studied had valuable insights that can be categorized broadly in terms of STEM capacity, STEM interest and a greater understanding of global prospects that led to heightened STEM awareness. In China and Taiwan, STEM capacity was built via both traditional and vocational school systems. Focused and structured curriculum during the primary and early secondary school years built solid mathematics and science skills that translated into higher performance on international assessments and competitions. Differentiated secondary school options, including vocational high school and technical colleges and

  7. Applied Semantic Web Technologies

    CERN Document Server

    Sugumaran, Vijayan

    2011-01-01

    The rapid advancement of semantic web technologies, along with the fact that they are at various levels of maturity, has left many practitioners confused about the current state of these technologies. Focusing on the most mature technologies, Applied Semantic Web Technologies integrates theory with case studies to illustrate the history, current state, and future direction of the semantic web. It maintains an emphasis on real-world applications and examines the technical and practical issues related to the use of semantic technologies in intelligent information management. The book starts with

  8. 民营科技企业技术创新能力评价模型与实证研究——基于模糊理论的视角%Evaluation Model on Non-state-owned Science & Technology Enterprise's Technology Innovation Capability and its Empirical Study——Based on Fuzzy Theory

    Institute of Scientific and Technical Information of China (English)

    周霞; 何健文

    2011-01-01

    According to the characters of non - state - owned science & technology enterprise and technology innovation, and based on the six factors: innovation environment、 resource input 、 innovation research & development、 innovation outcome , marketing and innovation management, the paper constructs an index system on non - state - owned science & technology enterprise' s technology innovation capability. Then by using a fuzzy integrated analytic hierarchy process method, it designs an evaluation model, which is a good way to help improve non - state - owned science & technology enterprise' s technology innovation capability. Finally, the paper applies the model to an empirical analysis in order to show its feasibility.%针对民营科技企业的特点与技术创新的内涵,以创新环境、资源投入、创新研发、创新产出、市场营销以及创新管理六个维度为基础,构建民营科技企业技术创新能力指标体系,并通过模糊综合层次分析法建立相关评价模型,为民营科技企业技术创新能力的评价和提升提供了新的决策方法.最后,通过实证分析检验了该模型的可行性.

  9. Finding Biomedical Information. A Learning Module for Medical Technology Students on the Basics of the Use of Medical Literature in the Shiffman Medical Library, Wayne State University, Detroit, Michigan.

    Science.gov (United States)

    Bryant, Barton B.; Rizzo, Joseph F.

    This self-instructional library workbook was used in a series of workshops--sponsored by the Medical Technology Department in Wayne State University's College of Pharmacy and Allied Health Professions--in order to reduce attrition by increasing the probability of success for academically high-risk students in the professional medical technology…

  10. Technology licensing in China

    DEFF Research Database (Denmark)

    Wang, Yuandi; Li-Ying, Jason; Chen, Jin

    2015-01-01

    We explore the landscape of technology licensing among Chinese entities in the period 2000–12, using a unique database on technological licensing from the State Intellectual Property Office of China. We find that: first, among Chinese licensee organizations, firms have dominated in terms...... of the number of licensed technologies; second, the geographical distribution of licensed technologies among the provinces has gradually reached a new quantitative balance; third, utility models are the most popular technologies to be licensed and the majority of technology licensing in China has been between...... Chinese entities, and most transactions have been local within provinces; and finally, Chinese firms have gradually in-licensed newer and newer technologies, but the technologies in-licensed from foreign sources are by no means state-of-the-art. We make several suggestions for innovation policy...

  11. Using Real-Time Social Media Technologies to Monitor Levels of Perceived Stress and Emotional State in College Students: A Web-Based Questionnaire Study.

    Science.gov (United States)

    Liu, Sam; Zhu, Miaoqi; Yu, Dong Jin; Rasin, Alexander; Young, Sean D

    2017-01-10

    College can be stressful for many freshmen as they cope with a variety of stressors. Excess stress can negatively affect both psychological and physical health. Thus, there is a need to find innovative and cost-effective strategies to help identify students experiencing high levels of stress to receive appropriate treatment. Social media use has been rapidly growing, and recent studies have reported that data from these technologies can be used for public health surveillance. Currently, no studies have examined whether Twitter data can be used to monitor stress level and emotional state among college students. The primary objective of our study was to investigate whether students' perceived levels of stress were associated with the sentiment and emotions of their tweets. The secondary objective was to explore whether students' emotional state was associated with the sentiment and emotions of their tweets. We recruited 181 first-year freshman students aged 18-20 years at University of California, Los Angeles. All participants were asked to complete a questionnaire that assessed their demographic characteristics, levels of stress, and emotional state for the last 7 days. All questionnaires were completed within a 48-hour period. All tweets posted by the participants from that week (November 2 to 8, 2015) were mined and manually categorized based on their sentiment (positive, negative, neutral) and emotion (anger, fear, love, happiness) expressed. Ordinal regressions were used to assess whether weekly levels of stress and emotional states were associated with the percentage of positive, neutral, negative, anger, fear, love, or happiness tweets. A total of 121 participants completed the survey and were included in our analysis. A total of 1879 tweets were analyzed. A higher level of weekly stress was significantly associated with a greater percentage of negative sentiment tweets (beta=1.7, SE 0.7; P=.02) and tweets containing emotions of fear (beta=2.4, SE 0.9; P=.01

  12. FINAL SCIENTIFIC REPORT Southwest United States of America – Distributed Technology Training Consortia (SWUSA-DTTC) Contract Number: DE-EE0006339

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, Kodie [Electricore, Inc., Santa Clarita, CA (United States)

    2014-12-29

    The Southwest United States of America – Distributed Technology Training Consortia (SWUSA-DTTC) leveraged the highest concentration of renewable resources in the U.S. as well as operation of the leading independent microgrid installations and other distributed technologies to collect and analyze real-time data streams, advance power system simulations and analysis, identify educational and training gaps and develop solutions-focused curricula. The SWUSA-DTTC consortium posed a unique collaboration between universities and utilities to ensure that classes were focused on subjects and topics of interest to the utilities and ones that had practical benefit related to the preparedness for accommodating high penetration of solar and other distributed energy technologies. This approach to have a close collaboration and shared effort to develop the course content and curriculum is unique and a significant departure from conventional course development. This coursework and training was intended to endure over a long time horizon (10-20 year time frame), and include professionals over the entire Southwest region and the rest of the US, and even outreach into foreign countries. Project Objectives In order to support the increase in power systems research, development, and analytical capacity, the SWUSA-DTTC brought together respected professors in Power Systems education, student/professor research and development, and valuable industry and utility experience. Through this program, the partnered universities created and/or modified existing curricula available to students and professionals in the form of university courses, short courses, videos, consortia-led training, and online materials. During this time, the supporting vendors and utilities provided the SWUSA-DTTC with technical advisory roles as well as providing input and feedback in terms of utility and related energy industry needs. The goals were to create power and energy systems training, curricula, and

  13. Study on Technological Conditions of Grape Vinegar Production in the Liquid - state Fermentation%葡萄果醋液态法生产工艺的研究

    Institute of Scientific and Technical Information of China (English)

    黄静; 武运; 雷用东

    2011-01-01

    以新疆特色的马奶子葡萄为原料,采用液态发酵法生产葡萄果醋。试验研究了葡萄果醋的生产工艺,同时分析了温度、起始酒精浓度、醋酸茵接种量对醋酸发酵的影响。结果表明:在酒精发酵阶段,糖度与酒度的变化呈负相关,即糖度降低酒度升高;总酸度变化不大,稍有上升,这是由于在酒精发酵阶段基本不产酸。在醋酸发酵阶段,其发酵的最佳组合温度为30°c、醋酸添加量为lO%、酒度为9%。%Using raisins grape as a raw material, the grape vinegar was produced by liquid - state fermentation. And this paper studied the processing technology of grape vinegar, analyzed the effects of temperature, alcohol content, amount of aeration. in the process of acetic acid fermentation, there also existed a close negative relationship between alcohol degree and aectic acid degree. Namely reduce wine degrees Brix elevatory; Total acid have not changed much, this is due to a slight rise in alcohol fermentation stage basic not produce acid. and the optimal combination was : 30°C temperature, 10% acetic acid additives. 9% (v/v) alcohol content.

  14. Quantitative analysis of an enlarged area Solid State X-ray Image Intensifier (SSXII) detector based on Electron Multiplying Charge Coupled Device (EMCCD) technology.

    Science.gov (United States)

    Swetadri, Vasan S N; Sharma, P; Singh, V; Jain, A; Ionita, Ciprian N; Titus, A H; Cartwright, A N; Bednarek, D R; Rudin, S

    2013-03-06

    Present day treatment for neurovascular pathological conditions involves the use of devices with very small features such as stents, coils, and balloons; hence, these interventional procedures demand high resolution x-ray imaging under fluoroscopic conditions to provide the capability to guide the deployment of these fine endovascular devices. To address this issue, a high resolution x-ray detector based on EMCCD technology is being developed. The EMCCD field-of-view is enlarged using a fiber-optic taper so that the detector features an effective pixel size of 37 µm giving it a Nyquist frequency of 13.5 lp/mm, which is significantly higher than that of the state of the art Flat Panel Detectors (FPD). Quantitative analysis of the detector, including gain calibration, instrumentation noise equivalent exposure (INEE) and modulation transfer function (MTF) determination, are presented in this work. The gain of the detector is a function of the detector temperature; with the detector cooled to 5° C, the highest relative gain that could be achieved was calculated to be 116 times. At this gain setting, the lowest INEE was measured to be 0.6 µR/frame. The MTF, measured using the edge method, was over 2% up to 7 cycles/ mm. To evaluate the performance of the detector under clinical conditions, an aneurysm model was placed over an anthropomorphic head phantom and a coil was guided into the aneurysm under fluoroscopic guidance using the detector. Image sequences from the procedure are presented demonstrating the high resolution of this SSXII.

  15. Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Indirect Liquefaction, Fast Pyrolysis, and Hydrothermal Liquefaction: Update of the 2016 State-of-Technology Cases and Design Cases

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Hao [Argonne National Lab. (ANL), Argonne, IL (United States; Dunn, Jennifer [Argonne National Lab. (ANL), Argonne, IL (United States; Pegallapati, Ambica [Argonne National Lab. (ANL), Argonne, IL (United States; Li, Qianfeng [Argonne National Lab. (ANL), Argonne, IL (United States; Canter, Christina [Argonne National Lab. (ANL), Argonne, IL (United States; Tan, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Biddy, Mary [National Renewable Energy Lab. (NREL), Golden, CO (United States); Davis, Ryan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Markham, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Talmadge, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hartley, Damon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thompson, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meyer, Pimphan A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhu, Yunhua [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Snowden-Swan, Lesley [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, Susanne [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-02-01

    The Department of Energy’s (DOE) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts and biopower through public and private partnerships (DOE, 2016). BETO and its national laboratory teams conduct in-depth technoeconomic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels, and life-cycle analysis of overall system sustainability.

  16. The state of the art on the dry decontamination technologies applicable to highly radioactive contaminants and their needs for the national nuclear fuel cycle developent

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Lee, K.W.; Won, H.J.; Jung, C.H.; Chol, W.K.; Kim, G.N.; Moon, J.K

    2000-12-01

    This report is intended to establish their needs to support the dry decontamination activities applicable to highly radioactive contaminants based on the requirement of technologies development suggested from the national nuclear fuel cycle projects, such as DUPIC, advanced spent fuel management and long-lived radionuclides conversion. The technology needs associated with decontamination addressed the requirements associated with the efficiency of decontamination technology, the reduction of secondary wastes, applicabilities and the remote operation. And also, Characterization and decontamination technologies for various contaminants are reviewed and analysed. Based on the assessment, Unit dry decontamination processes are selected and the schematic flow diagram for decontamination of highly radioactive contaminants.

  17. Information Sharing between the U.S. Department State and the U.S. Army: Using Knowledge Management Technology and Tools to Bridge the Gap

    Science.gov (United States)

    2015-06-12

    States Army Training and Doctrine Command U.S. United States USAID United States Agency for International Development WHA Bureau of Western...Bureau to Hawaii, and the WHA Bureau to Miami causing those bureaus to be disconnected from the rest of State in Washington, DC. Because the GCC lines

  18. SHARED TECHNOLOGY TRANSFER PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    GRIFFIN, JOHN M. HAUT, RICHARD C.

    2008-03-07

    The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

  19. Investigando portais de governo eletrônico de estados no Brasil: muita tecnologia, pouca democracia Investigating e-gov portals in brazilian states: much technology, little democracy

    Directory of Open Access Journals (Sweden)

    José Antonio Gomes de Pinho

    2008-06-01

    Full Text Available Este artigo investiga portais de governos estaduais no Brasil, para detectar os movimentos do governo eletrônico que pretendem aprofundar a democracia por meio de processos digitais. Procedeu-se à investigação de nove portais dos estados considerados mais desenvolvidos do país e do Distrito Federal. O modelo de análise contempla, por um lado, os aspectos mais tecnológicos dos portais e como estes disponibilizam informações para os cidadãos, de maneira a criar facilidades para as suas vidas. Por outro - e este é o aspecto mais importante -, os referentes a accountability e a participação popular, no sentido de verificar como os portais (e os governos considerados têm se constituído em um experimento de aprofundamento da democracia no Brasil e de realização de um novo tipo de sociedade: a digital. O quadro teórico enfatiza as categorias de governo eletrônico, accountability e participação popular. Os resultados não são animadores, convergindo com a experiência internacional, e são atribuídos à trajetória conservadora e autoritária do Estado no Brasil. Pondera-se, também, que todos esses processos, tanto do ponto de vista da absorção dos parâmetros da sociedade digital quanto do desenvolvimento da democracia, ainda estão em construção na sociedade brasileira.This article investigates portals of state governments in Brazil in order to find out the steps taken by the e-gov to improve democracy through digital processes. The article is focused on portals in nine of the more economically developed states, plus the country's capital, Brasilia. The analytical model looks at, in one sense, the more technologically advanced features of the portals and how these websites make available information to citizens in a way to make their lives easier. In the other, and this is the most important point, the article deals with the features concerning accountability and popular participation in order to verify how the portals (and

  20. Learning from Our Global Competitors: A Comparative Analysis of Science, Technology, Engineering and Mathematics (STEM) Education Pipelines in the United States, Mainland China and Taiwan

    Science.gov (United States)

    Chow, Christina M.

    2011-01-01

    Maintaining a competitive edge within the 21st century is dependent on the cultivation of human capital, producing qualified and innovative employees capable of competing within the new global marketplace. Technological advancements in communications technology as well as large scale, infrastructure development has led to a leveled playing field…