WorldWideScience

Sample records for technology support center

  1. Center for Global Health announces grants to support portable technologies

    Science.gov (United States)

    NCI's Center for Global Health announced grants that will support the development and validation of low-cost, portable technologies. These technologies have the potential to improve early detection, diagnosis, and non-invasive or minimally invasive treatm

  2. Supporting learner-centered technology integration through situated mentoring

    Science.gov (United States)

    Rosenberg, Marian Goode

    Situated mentoring was used as a professional development method to help 11 high school science teachers integrate learner-centered technology. The teachers' learner-centered technology beliefs and practices as well as their perception of barriers to learner-centered technology integration were explored before and after participating in the mentoring program. In addition, the participants' thoughts about the effectiveness of various components of the mentoring program were analyzed along with the mentor's observations of their practices. Situated mentoring can be effective for supporting learner-centered technology integration, in particular decreasing the barriers teachers experience. Goal setting, collaborative planning, reflection, and onsite just-in-time support were thought to be the most valuable components of the mentoring program.

  3. Digital Technologies Supporting Person-Centered Integrated Care - A Perspective.

    Science.gov (United States)

    Øvretveit, John

    2017-09-25

    Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning "digitalisation" of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

  4. PTC test bed upgrades to provide ACSES testing support capabilities at transportation technology center.

    Science.gov (United States)

    2015-06-01

    FRA Task Order 314 upgraded the Positive Train Control (PTC) Test Bed at the Transportation Technology Center to support : testing of PTC systems, components, and related equipment associated with the Advanced Civil Speed Enforcement System : (ACSES)...

  5. Work-Centered Support System Technology: A New Interface Client Technology for the Battlespace Infosphere

    National Research Council Canada - National Science Library

    Eggleston, Robert G; Young, Michael J; Whitaker, Randell D

    2000-01-01

    .... Although the infosphere's core web and agent technologies are clearly able to provide a heterogeneous infosphere, improved interface technologies are also needed to address problems of information...

  6. Digital Technologies Supporting Person-Centered Integrated Care – A Perspective

    Directory of Open Access Journals (Sweden)

    John Øvretveit

    2017-09-01

    Full Text Available Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning “digitalisation” of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

  7. A proposal for improving data center management through strategic implementation of Server virtualization technology to support Malaysian Nuclear Agency's activities

    International Nuclear Information System (INIS)

    Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Raja Murzaferi Raja Moktar; Saaidi Ismail

    2010-01-01

    Management of servers in Nuclear Malaysia's data center poses a big challenge to IT Center as well as to the general management. Traditional server management techniques have been used to provide reliable and continuous support for the ever increasing services and applications demanded by researchers and the other staffs of Nuclear Malaysia. Data centers are cost centers which need logistical support such as electricity, air conditioning, room space, manpower and other resources. To save cost and comply with Green Technology while maintaining or improving the level of services, a new concept called server virtualization is proposed and a feasibility study of this technology has been initiated to explore its potential to accommodate IT centers ever demanding services while reducing the need for such logistical supports, hence adhering to the Green IT concept. Server virtualization is a new technology where a single high performance physical server can host multiple high processing services, and different types operating systems with different hardware and software requirements which are traditionally performed by multiple server machines. This paper briefly explains server virtualization concepts, tools and techniques and proposes an implementation strategy of the technology for Nuclear Malaysia's data center. (author)

  8. "Infotonics Technology Center"

    Energy Technology Data Exchange (ETDEWEB)

    Fritzemeier, L. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Boysel, M. B. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Smith, D. R. [Infotonics Technology Center Inc., Canandaigua, NY (United States)

    2004-09-30

    During this grant period July 15, 2002 thru September 30, 2004, the Infotonics Technology Center developed the critical infrastructure and technical expertise necessary to accelerate the development of sensors, alternative lighting and power sources, and other specific subtopics of interest to Department of Energy. Infotonics fosters collaboration among industry, universities and government and operates as a national center of excellence to drive photonics and microsystems development and commercialization. A main goal of the Center is to establish a unique, world-class research and development facility. A state-of-the-art microsystems prototype and pilot fabrication facility was established to enable rapid commercialization of new products of particular interest to DOE. The Center has three primary areas of photonics and microsystems competency: device research and engineering, packaging and assembly, and prototype and pilot-scale fabrication. Center activities focused on next generation optical communication networks, advanced imaging and information sensors and systems, micro-fluidic systems, assembly and packaging technologies, and biochemical sensors. With targeted research programs guided by the wealth of expertise of Infotonics business and scientific staff, the fabrication and packaging facility supports and accelerates innovative technology development of special interest to DOE in support of its mission and strategic defense, energy, and science goals.

  9. Clean Air Technology Center

    Science.gov (United States)

    The Clean Air Technology Center provides resources for emerging and existing air pollution prevention and control technologies and provides public access to data and information on their use, effectiveness and cost.

  10. Practical Education Support to Foster Engineers at Manufacturing and Engineering Design Center in Muroran Institute of Technology

    Science.gov (United States)

    Kazama, Toshiharu; Hanajima, Naohiko; Shimizu, Kazumichi; Satoh, Kohki

    To foster engineers with creative power, Muroran Institute of Technology established Manufacturing and Engineering Design Center (MEDeC) that concentrates on Monozukuri. MEDeC consists of three project groups : i) Education Support Group provides educational support for practical training classes on and off campus and PDCA (plan-do-check-action) -conscious engineering design education related to Monozukuri ; ii) Fundamental Manufacturing Research Group carries out nurture research into fundamental and innovative technology of machining and manufacturing, and iii) Regional Cooperation Group coordinates the activities in cooperation with bureau, schools and industries in and around Muroran City. MEDeC has a fully integrated collection of machine tools and hand tools for manufacturing, an atelier, a tatara workplace, implements for measurement and related equipment designed for practically teaching state-of-the-practice manufacturing methods.

  11. Solar Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, Bob

    2011-04-27

    The Department of Energy, Golden Field Office, awarded a grant to the UNLV Research Foundation (UNLVRF) on August 1, 2005 to develop a solar and renewable energy information center. The Solar Technology Center (STC) is to be developed in two phases, with Phase I consisting of all activities necessary to determine feasibility of the project, including design and engineering, identification of land access issues and permitting necessary to determine project viability without permanently disturbing the project site, and completion of a National Environmental Policy Act (NEPA) Environmental Assessment. Phase II is the installation of infrastructure and related structures, which leads to commencement of operations of the STC. The STC is located in the Boulder City designated 3,000-acre Eldorado Valley Energy Zone, approximately 15 miles southwest of downtown Boulder City and fronting on Eldorado Valley Drive. The 33-acre vacant parcel has been leased to the Nevada Test Site Development Corporation (NTSDC) by Boulder City to accommodate a planned facility that will be synergistic with present and planned energy projects in the Zone. The parcel will be developed by the UNLVRF. The NTSDC is the economic development arm of the UNLVRF. UNLVRF will be the entity responsible for overseeing the lease and the development project to assure compliance with the lease stipulations established by Boulder City. The STC will be operated and maintained by University of Nevada, Las Vegas (UNLV) and its Center for Energy Research (UNLV-CER). Land parcels in the Eldorado Valley Energy Zone near the 33-acre lease are committed to the construction and operation of an electrical grid connected solar energy production facility. Other projects supporting renewable and solar technologies have been developed within the energy zone, with several more developments in the horizon.

  12. Antenna Technology and other Radio Frequency (RF) Communications Activities at the Glenn Research Center in Support of NASA's Exploration Vision

    Science.gov (United States)

    Miranda, Felix A.

    2007-01-01

    NASA s Vision for Space Exploration outlines a very ambitious program for the next several decades of the Space Agency endeavors. Ahead is the completion of the International Space Station (ISS); safely flight the shuttle (STS) until 2010; develop and fly the Crew Exploration Vehicle (Orion) by no later than 2014; return to the moon by no later than 2020; extend human presence across the solar system and beyond; implement a sustainable and affordable human and robotic program; develop supporting innovative technologies, knowledge and infrastructure; and promote international and commercial participation in exploration. To achieve these goals, a series of enabling technologies must be developed or matured in a timely manner. Some of these technologies are: spacecraft RF technology (e.g., high power sources and large antennas which using surface receive arrays can get up to 1 Gbps from Mars), uplink arraying (reduce reliance on large ground-based antennas and high operation costs; single point of failure; enable greater data-rates or greater effective distance; scalable, evolvable, flexible scheduling), software define radio (i.e., reconfigurable, flexible interoperability allows for in flight updates open architecture; reduces mass, power, volume), and optical communications (high capacity communications with low mass/power required; significantly increases data rates for deep space). This presentation will discuss some of the work being performed at the NASA Glenn Research Center, Cleveland, Ohio, in antenna technology as well as other on-going RF communications efforts.

  13. Nuclear Information Center: 25 years of CNEN in the support of science and technology

    International Nuclear Information System (INIS)

    Sayao, Luiz Fernando; Monteiro de Barros, Anna Christina T.

    1995-01-01

    The 25 years of the Nuclear Information Centre of the Brazilian Nuclear Energy Commission - CIN/CNEN, and the role played in the context of Brazilian scientific and technological development is analyzed under two points of view: as database producer and information services provider as well as generator of knowledge and technology in the field of Information Science. The pioneer role of the Centre, not only in developing software for bibliographic information handling and in building a marketing model to information services but also contributing for the growth of database usage culture in Brazil is described. Cooperation, decentralization and sharing of resources are emphasized as the main characteristics of the work developed by the CIN/CNEN staff. Finally, the international background of CIN/CNEN coordinating Latin-American Projects as well as an active member of INIS - International Nuclear Information System, IAEA and more recently as the Brazilian representative to ETDE - Energy Technology Data Exchange is shown. IEA energy database is also discussed. (author)

  14. Research and Development in Support of the Navy Technology Center for Safety and Survivability

    Science.gov (United States)

    1990-10-26

    reflects primarily the loss of water from the sample. GAS CHROMATOGRAPHY (GC) AND/OR MASS SPECTOMETRY (GC/MS): The atmospheric species adsorbed on the...REPORT TYPE AND DATES COVERED 26 October 1990 FINAL JULY 1986 - SEPT 1990 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS Research and Development in Support...public availability or limitations. Cite any Block 2. Report Date . Full publication date availability to the public. Enter additional Including day

  15. Air Risk Information Support Center

    Energy Technology Data Exchange (ETDEWEB)

    Shoaf, C.R.; Guth, D.J. [Environmental Protection Agency, Washington, DC (United States)

    1990-12-31

    The Air Risk Information Support Center (Air RISC) was initiated in early 1988 by the US Environmental Protection Agency`s (EPA) Office of Health and Environmental Assessment (OHEA) and the Office of Air Quality Planning and Standards (OAQPS) as a technology transfer effort that would focus on providing information to state and local environmental agencies and to EPA Regional Offices in the areas of health, risk, and exposure assessment for toxic air pollutants. Technical information is fostered and disseminated by Air RISCs three primary activities: (1) a {open_quotes}hotline{close_quotes}, (2) quick turn-around technical assistance projects, and (3) general technical guidance projects. 1 ref., 2 figs.

  16. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  17. Establishing a Center for Instructional Technologies.

    Science.gov (United States)

    Culp, George H.

    1999-01-01

    Reviews how the University of Texas at Austin (UT-Austin) established a center to support its faculty. Addresses key questions related to the development of instructional technology (IT) centers through examples from UT-Austin. Discusses funding, fees, types of services and support, staffing, facilities provided, and training philosophy.…

  18. Clean Air Technology Center Products

    Science.gov (United States)

    The Clean Air Technology Center provides resources for emerging and existing air pollution prevention and control technologies and provides public access to data and information on their use, effectiveness and cost.

  19. Recent Efforts in Communications Research and Technology at the Glenn Research Center in Support of NASA's Mission

    Science.gov (United States)

    Miranda, Felix A.

    2015-01-01

    As it has done in the past, NASA is currently engaged in furthering the frontiers of space and planetary exploration. The effectiveness in gathering the desired science data in the amount and quality required to perform this pioneering work relies heavily on the communications capabilities of the spacecraft and space platforms being considered to enable future missions. Accordingly, the continuous improvement and development of radiofrequency and optical communications systems are fundamental to prevent communications to become the limiting factor for space explorations. This presentation will discuss some of the research and technology development efforts currently underway at the NASA Glenn Research Center in the radio frequency (RF) and Optical Communications. Examples of work conducted in-house and also in collaboration with academia, industry, and other government agencies (OGA) in areas such as antenna technology, power amplifiers, radio frequency (RF) wave propagation through Earths atmosphere, ultra-sensitive receivers, thin films ferroelectric-based tunable components, among others, will be presented. In addition, the role of these and other related RF technologies in enabling the NASA next generation space communications architecture will be also discussed.

  20. Center for Advanced Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, Rick

    2013-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, CAST is now a five-university consortium – Virginia Tech, West Virginia University, University of Kentucky, University of Utah and Montana Tech, - that is supported through U.S. DOE Cooperative Agreement No. DE-FE0000699, Center for Advanced Separation Technology. Much of the research to be conducted with Cooperative Agreement funds will be longer term, high-risk, basic research and will be carried out in two broad areas: Advanced Pre-Combustion Clean Coal Technologies and Gas-Gas Separations. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the five member universities. These were reviewed and the selected proposals were forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed below by category, along with abstracts from their final reports.

  1. Technologies for Learner-Centered Feedback

    Science.gov (United States)

    Costello, Jane; Crane, Daph

    2013-01-01

    As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes.…

  2. Technology to Support Motivational Interviewing.

    Science.gov (United States)

    Gance-Cleveland, Bonnie; Ford, Loretta C; Aldrich, Heather; Oetzel, Keri Bolton; Cook, Paul; Schmiege, Sarah; Wold, Mary

    This paper reports the findings of motivational interviewing (MI) training with and without technology support on school-based health center (SBHC) providers' satisfaction with MI training, providers' self-report of behavioral counseling related to childhood overweight/obesity, and parents' perception of care after training. The effects of training and technology on MI is part of a larger comparative effectiveness, cluster randomized trial. Twenty-four SBHCs in six states received virtual training on MI. Half the sites received HeartSmartKids™, a bilingual (English/Spanish), decision-support technology. The technology generated tailored patient education materials. Standard growth charts were plotted and health risks were highlighted to support MI counseling. The results of the MI training included provider satisfaction with MI training and parent assessment of the components of MI in their child's care. Providers and parents were surveyed at baseline, after training, and six months after training. Providers were satisfied with training and reported improvements in counseling proficiency (ptechnology group reported significant improvement in provider support for healthy eating (p=0.04). Virtual training has the potential of preparing providers to use MI to address childhood obesity. Technology improved parent support for healthy eating. Future research should evaluate the impact of technology to support MI on patient outcomes. Childhood obesity guidelines emphasize that MI should be used to promote healthy weight in children. Training providers on MI may help more providers incorporate obesity guidelines in their practice. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. CAD/BIM Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — Supporting Better Decisions in Facility, Infrastructure, and Environment ManagementAccess to technology tools to model structures before they are built can provide...

  4. Using Videoconferencing Technology to Provide Breastfeeding Support to Low-Income Women: Connecting Hospital-Based Lactation Consultants with Clients Receiving Care at a Community Health Center.

    Science.gov (United States)

    Friesen, Carol A; Hormuth, Laura J; Petersen, Devan; Babbitt, Tina

    2015-11-01

    The Tele-Lactation Pilot Project (TLPP), 1 of 13 community-based breastfeeding projects implemented in Indiana in 2013 using Centers for Disease Control and Prevention grant funds, explored the feasibility of using videoconferencing technology to provide breastfeeding education and support to low-income women by a centrally located International Board Certified Lactation Consultant (IBCLC). The IBCLC was housed at the Breastfeeding Center at the hospital where the women would deliver; the women receiving the education and support were located at an inner-city community health center (CHC) where they received their primary care. The videoconferencing sessions were juxtaposed with the women's regularly scheduled prenatal and postnatal visits at the CHC. After delivery, the lactation consultant visited the mother and infant in person at the hospital to offer additional support. Overall, 35 mothers were served by the TLPP during the 9-month project period. A total of 134 visits (30-45 minutes each) were conducted (3.8 sessions per woman). At the conclusion of the project, interviews with key participants indicated that the tele-lactation videoconferencing sessions were easy to implement, allowed the IBCLC to reach a wider client base, and allowed the women to receive expert support that they might not have otherwise received. Comments indicated that, in addition to providing education and increasing the women's confidence, the tele-lactation sessions appeared to have decreased the mothers' anxiety about the birthing process and the hospital experience. The TLPP demonstrated that incorporating videoconferencing technology into routine care can help foster collaboration among health care providers and provide mothers with continuous, easily accessible breastfeeding education and support. © The Author(s) 2015.

  5. Deployable Network Operations Center (DNOC): A Collaborative Technology Infostructure Designed to Support Tactical Sensor-Decision Maker Network Operations

    National Research Council Canada - National Science Library

    Johnson, Shawn E

    2005-01-01

    .... The increasing use of expeditionary and special operations forces operating in ad hoc, dynamic, and tactical environments poses a need for an adaptable, flexible, and responsive Deployable Network Operations Center (DNOC...

  6. Morgantown Energy Technology Center, technology summary

    International Nuclear Information System (INIS)

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. METC's R ampersand D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities

  7. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-10-31

    The Deactivation and Decommissioning (D&D) Technology Assessment Program (TAP) was developed to provide detailed, comparable data for environmental technologies and to disseminate this data to D&D professionals in a manner that will facilitate the review and selection of technologies to perform decontamination and decommissioning. The objectives for this project include the following: Determine technology needs through review of the Site Technology Coordination Group (STCG) information and other applicable websites and needs databases; Perform a detailed review of industries that perform similar activities as those required in D&D operations to identify additional technologies; Define the technology assessment program for characterization and waste management problem sets; Define the data management program for characterization, dismantlement, and waste management problem sets; Evaluate baseline and innovative technologies under standard test conditions at Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) and other locations and collect data in the areas of performance, cost, health and safety, operations and maintenance, and primary and secondary waste generation; Continue to locate, verify, and incorporate technology performance data from other sources into the multimedia information system; and Develop the conceptual design for a dismantlement technology decision analysis tool for dismantlement technologies.

  8. The 10th Anniversary Of Daejeon Environmental Technology Development Center

    International Nuclear Information System (INIS)

    2010-12-01

    This book describes the Daejeon Environment Technology Development Center with pictures for ten years. It also introduces the purpose of the foundation and background of center, structure of the center, main project and role of the center, center logo, current situation of cost of project, research business for 10 years, business supporting the environmental corporate, environment education, public relations activity and vision and prospect of the Daejeon Environmental Technology Development Center.

  9. Technologies for learner-centered feedback

    Directory of Open Access Journals (Sweden)

    Jane Costello

    2013-09-01

    Full Text Available As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes. Feedback, types of feedback, guidelines for effective learner-centered feedback, and feedback’s relationship to assessment are presented. Methods of providing feedback, for example, automated, audio scribe pens, digital audio, etc., and the related technologies are described. Technologies that allow instructors to make informed decisions about the use of various methods for feedback are discussed.

  10. NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute’s Technology Transfer Center (TTC) facilitates partnerships between the NIH research laboratories and external partners. With specialized teams, TTC guides the interactions of our partners from the point of discovery to patenting, from invention development to licensing. We play a key role in helping to accelerate development of cutting-edge research by connecting our partners to NIH’s world-class researchers, facilities, and knowledge.

  11. TTI Phase 2 Institutional Support: Center for Study of Science ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    TTI Phase 2 Institutional Support: Center for Study of Science, Technology and Policy. This funding will enhance the Center for Study of Science, Technology and Policy's (CSTEP) role as a credible public policy institution in India by strengthening its ability to provide high-quality, influential, and policy-relevant research.

  12. Johnson Space Center Research and Technology Report

    Science.gov (United States)

    Pido, Kelle; Davis, Henry L. (Technical Monitor)

    1999-01-01

    As the principle center for NASA's Human Exploration and Development of Space (HEDS) Enterprise, the Johnson Space Center (JSC) leads NASA's development of human spacecraft, human support systems, and human spacecraft operations. To implement this mission, JSC has focused on developing the infrastructure and partnerships that enable the technology development for future NASA programs. In our efforts to develop key technologies, we have found that collaborative relationships with private industry and academia strengthen our capabilities, infuse innovative ideas, and provide alternative applications for our development projects. The American public has entrusted NASA with the responsibility for space--technology development, and JSC is committed to the transfer of the technologies that we develop to the private sector for further development and application. It is our belief that commercialization of NASA technologies benefits both American industry and NASA through technology innovation and continued partnering. To this end, we present the 1998-1999 JSC Research and Technology Report. As your guide to the current JSC technologies, this report showcases the projects in work at JSC that may be of interest to U.S. industry, academia, and other government agencies (federal, state, and local). For each project, potential alternative uses and commercial applications are described.

  13. Staffing Up for Technology Support.

    Science.gov (United States)

    Carter, Kim

    2000-01-01

    Examines current technology staffing in school districts and compares technology-related roles with a similar study conducted in 1997. Discusses job titles; responsibilities; career paths; lack of technology support in schools; district-level support; teacher training; peer assistance; student roles; collaboration with library media specialists;…

  14. Mission & Role | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The NCI TTC serves as the focal point for implementing the Federal Technology Transfer Act to utilize patents as incentive for commercial development of technologies and to establish research collaborations and licensing among academia, federal laboratories, non-profit organizations, and industry. The TTC supports technology development activities for the National Cancer Institute and nine other NIH Institutes and Centers. TTC staff negotiate co-development agreements and licenses with universities, non-profit organizations, and pharmaceutical and biotechnology companies to ensure compliance with Federal statutes, regulations and the policies of the National Institutes of Health. TTC also reviews employee invention reports and makes recommendations concerning filing of domestic and foreign patent applications. | [google6f4cd5334ac394ab.html

  15. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  16. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-09-30

    Co., Inc. was evaluated. A summary of the demonstration will be included in the October monthly report. A Kool-Vest from MicroClimate Systems, Inc. was evaluated during assessment at Beaver, WV from 8/16/99 to 8/17/99. The evaluation was performed in the same manner as the MTR Chemical Protective Suit described above. A summary of the demonstration will be included in the October monthly report. A brochure announcing the new Gateway to Environmental Technology (GET) website was produced by FIU-HCET and is being distributed to the D&D community by FETC-DDFA. The website provides links to the TIS and other decision support systems developed at FIU-HCET.

  17. Information and communication technologies to support chronic disease self-management: Preconditions for enhancing the partnership in person-centered care

    NARCIS (Netherlands)

    Wildevuur, S.E.; Thomese, Fleur; Ferguson, J.E.; Klink, A.

    2017-01-01

    Objective: In order to alleviate the pressure on health care systems exerted by the growing prevalence of chronic diseases, information and communication technologies (ICT) are being introduced to enable self-management of chronic diseases by supporting partnerships between patients and health care

  18. Building Technologies Research and Integration Center (BTRIC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

  19. Technology support for participatory budgeting

    DEFF Research Database (Denmark)

    Rose, Jeremy; Rios, Jesus; Lippa, Barbara

    2010-01-01

    Participatory budgeting is a reasonably well-established governance practice, particularly in South America. It is information and communication rich - making it well suited for modern technology support; in addition, the widespread participation of many citizens is difficult to achieve without...... this support. Participatory budgeting is associated with eParticipation, where much is already known about the kinds of technologies supporting citizen participation and how they are used. This paper identifies (from the existing literature) basic processes which are common to most participatory budgeting......, is integrated with a purpose-built internet platform; here we use the analysis to understand how the internet-based technologies are used to support the various participatory budgeting processes. We identify a range of these technologies which are currently used to support different eParticipation activities...

  20. About the Clean Air Technology Center

    Science.gov (United States)

    The Clean Air Technology Center provides resources for emerging and existing air pollution prevention and control technologies and provides public access to data and information on their use, effectiveness and cost.

  1. License Agreements | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    NCI Technology Transfer Center (TTC) licenses the discoveries of NCI and nine other NIH Institutes so new technologies can be developed and commercialized, to convert them into public health benefits.

  2. CENTER FOR ADVANCED SEPARATION TECHNOLOGY (CAST) PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan; Hull, Christopher

    2014-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations.

  3. Search Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  4. Available Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  5. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-04-30

    The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

  6. A collaborative innovation experience of person-centered technology: emotional detection and possible contributions to the support of people with intellectual and developmental disabilitie

    Directory of Open Access Journals (Sweden)

    Pako Mendizabal Agirre

    2013-12-01

    Full Text Available The present article aims to raise awareness about the interesting results that stem from collaboration between organisations that develop social technology and those providing support to people who suffer from severe intellectual and developmental disabilities. This type of joint effort facilitates the development of innovative user centred technology that satisfies their actual needs in a natural environment. In our case, Tecnalia and Uliazpi have been working together for a number of years to identify the needs of Uliazpi’s users and the most adequate technological solutions to meet those needs. In this context, the article outlines a project that has emerged from this alliance. It consists of an emotion detection system that can help professional carers to recognise and control situations that promote or reduce the wellbeing of people who are not capable of communicating by their own means.

  7. MSFC Technical Support Team in the Huntsville Support Operations Center

    Science.gov (United States)

    1990-01-01

    NASA and Hubble Space Telescope (HST) contractor employees monitor their data screens in the Huntsville Support Operations Center during a recent HST mission simulation at the Marshall Space Flight Center (MSFC) in Huntsville, Alabama. The Center will have a major role in the launch, deployment, and checkout of the HST in April 1990. The technicians will monitor telescope telemetry, tracking several thousand engineering measurements to determine the ongoing status of the HST and to confirm whether the telescope has responded properly to ground commands sent from the control center at the Goddard Space Flight Center (GSFC). With the information they receive, they can identify problems if they arise. Also, they will use their in-depth knowledge of the telescope and its systems to analyze problems and recommend ways to resolve them. Thirdly, they will evaluate HST performance to determine its true capabilities and project its future performance. Huntsville Support Operations Center will p

  8. 2017 Technology Showcase | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The 2017 Technology Showcase is an inaugural, half-day event showcased technologies developed by the National Cancer Institute's Center for Cancer Research (CCR) and the Frederick National Laboratory for Cancer Research (FNLCR).

  9. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-01-31

    FIU-HCET participated in an ICT meeting at Mound during the second week of December and presented a brief videotape of the testing of the Robotic Climber technology. During this meeting, FIU-HCET proposed the TechXtract technology for possible testing at Mound and agreed to develop a five-page proposal for review by team members. FIU-HCET provided assistance to Bartlett Inc. and General Lasertronics Corporation in developing a proposal for a Program Opportunity Notice (PON). The proposal was submitted by these companies on January 5, 1999. The search for new equipment dismantlement technologies is continuing. The following vendors have responded to requests for demonstration: LUMONICS, Laser Solutions technology; CRYO-BEAM, Cryogenic cutting technology; Waterjet Technology Association, Waterjet Cutting technology; and DIAJET, Waterjet Cutting technology. Based on the tasks done in FY98, FIU-HCET is working closely with Numatec Hanford Corporation (NHC) and Pacific Northwest National Laboratory (PNNL) to revise the plan and scope of work of the pipeline plugging project in FY99, which involves activities of lab-scale flow loop experiments and a large-scale demonstration test bed.

  10. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  11. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Hull

    2009-10-31

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

  12. International Center for Gas Technology Information

    International Nuclear Information System (INIS)

    Gad, L.H.

    1993-01-01

    Based on an acknowledgement of the growing importance of natural gas, a number of European countries, USA, Japan and the Russian Federation have worked together in order to establish a common center of information on natural gas technology under the auspices of the International Energy Agency. Centers were to be established in Washington and in Denmark. The centers will concern themselves with establishing an international information center for gas technology, effecting natural gas technology transfer between global regions, carrying out analytical studies on the energy market and the development of technology within the field of natural gas. The structure of the decision-making processes that will be employed is explained in addition to the organization and economy. The centers should build up a global information network between the relevant countries, their gas companies, institutions etc. (AB)

  13. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-03-30

    A vendor was selected for the diamond wire technology demonstration scheduled for this summer at Princeton Plasma Physics Laboratory (PPPL). A team consisting of personnel from FIU-HCET, PPPL, and AEA Technology reviewed the submitted bids. FIU-HCET will contract this vendor. At the SRS Ninth ICT teleconference, the ICT team discussed the status of the following demonstrations: LRAD; x-ray, K-edge; Strippable Coatings; Thermal Spray Vitrification; Cutting/Shearing/Dismantlement/Size Reduction; and Electrets. The LRAD demo is complete, and the x-ray/K-edge, Strippable Coatings, and Electrets demos are ongoing. The Asbestos and Thermal Spray Vitrification demos require more laboratory testing. The Cutting/Shearing/Dismantlement/Size Reduction demo is undergoing procurement. Five FIU-HCET staff members took the 1S0 14000 environmental auditor training course February 22-26, 1999, given by ASC. The test plan for the Facility Dismantlement Technology Assessment is finished and ready for internal review.

  14. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A.Ebadian

    1999-02-28

    Search for decontamination technologies to be assessed at FIU-HCET continues. Bartlett Nuclear Inc. returned to FIU-HCET on February 15-19, 1999, to complete the demonstration of coating removal from concrete ceiling and aggressive contamination removal on uncoated concrete wall using their Robotic Climber. The design of test beds for large-scale technology demonstration of blockage locating and pipe unplugging has undergone major revision. The lab-scale test loop is also under modification. A new sampling system using isokinetic principles and consisting of thermistors, flow controller, and Wheatstone bridge will be installed on the flow loop. FIU-HCET International Coordinator attended the VII Steering Committee meeting in Lima, Peru, on February 11-12, 1999, and successfully introduced the Interactive Communication Website. Additional agenda items on the Website were proposed by the Steering Committee for upcoming committee meetings and working groups.

  15. NASA(Field Center Based) Technology Commercialization Centers

    Science.gov (United States)

    1995-01-01

    Under the direction of the IC(sup 2) Institute, the Johnson Technology Commercialization Center has met or exceeded all planned milestones and metrics during the first two and a half years of the NTCC program. The Center has established itself as an agent for technology transfer and economic development in- the Clear Lake community, and is positioned to continue as a stand-alone operation. This report presents data on the experimental JTCC program, including all objective measures tracked over its duration. While the metrics are all positive, the data indicates a shortage of NASA technologies with strong commercial potential, barriers to the identification and transfer of technologies which may have potential, and small financial return to NASA via royalty-bearing licenses. The Center has not yet reached the goal of self-sufficiency based on rental income, and remains dependent on NASA funding. The most important issues raised by the report are the need for broader and deeper community participation in the Center, technology sourcing beyond JSC, and the form of future funding which will be appropriate.

  16. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    2000-01-31

    The Online Measurement of Decontamination project team received a commitment for a demonstration in May from the Sacramento (California) Municipal Utility District (SMUD) Rancho Seco site. Since this site is a member of the DOE Commercial Utilities Consortium, the demonstration will fulfill the DOE and commercial technology demonstration requirements. Discussion on deployment of the Integrated Vertical and Overhead Decontamination (IVOD) System at Rancho Seco was conducted; date for deployment tentatively scheduled for early spring. Based upon fictional requirements from SRS for a shiny monitor in a high-level waste tank, FIU-HCET developed and delivered a draft slurry monitor design and draft test plan. Experiments measuring slurry settling time for SRS slurry simulant at 10 wt% have been completed on FIU-HCET'S flow loop with SRS dip. The completed design package of the test mockup for evaluating Non-Intrusive Location of Buried Items Technologies was sent to Fluor Fernald and the Operating Engineers National Hazmat Program for review. Comments are due at the end of January. Preliminary experiments to determine size distribution of aerosols generated during metal cutting were performed. A 1/4-inch-thick iron plate was cut using a plasma arc torch, and the size distribution of airborne particles was measured using a multistage impactor. Per request of DOE-Ohio, FIU-HCET participated in a weeklong value engineering study for the characterization, decontamination, and dismantlement of their critical path facility.

  17. Detailed workplan for innovative technology demonstrations to support existing treatment operations at the Installation Logistics Center, DSERTS Site FTLE-33, Fort Lewis, Washington

    Energy Technology Data Exchange (ETDEWEB)

    Liikala, T.L.

    1998-07-01

    This workplan is an assemblage of documents for use by Pacific Northwest National Laboratory (PNNL) to direct and control project activities at Fort Lewis, Washington. Fort Lewis is a FORSCOM installation, whose Logistics Center (DSERTS Site FTLE-33) was placed on the National priorities List (NPL) in December 1989, as a result of trichloroethene (TCE) contamination in groundwater beneath the site. Site background information and brief descriptions of the Fort Lewis project and the main supporting documents, which will be used to direct and control the project activities, are provided. These are followed by a summary of the Work Breakdown Structure (WBS) elements, a general project schedule, a list of major deliverables, and a budget synopsis. Test plans for specific elements (Bench-Scale Testing) will be developed separately as those elements are initiated. If additional activities not specifically addressed in the Project Management Plan (Attachment 1) are added to the work scope, addendums to this workplan will be prepared to cover those activities.

  18. Engineering Technical Support Center Annual Report Fiscal ...

    Science.gov (United States)

    The United States Environmental Protection Agency (EPA or Agency) Office of Research and Development (ORD) created the Engineering Technical Support Center (ETSC) in 1987, one of several technical support centers created as part of the Technical Support Project (TSP). ETSC provides engineering expertise to Agency program and regional offices and remediation teams working at contaminated sites across the country. The ETSC is operated within ORD’s Land Remediation and Pollution Control Division (LRPCD) of the National Risk Management Research Laboratory (NRMRL) in Cincinnati, Ohio. The ETSC’s mission is to provide site-specific scientific and engineering technical support to Remedial Project Managers, On-Scene Coordinators, and other remediation personnel at contaminated sites. This allows local, regional, or national authorities to work more quickly, efficiently, and cost effectively, while also increasing the technical experience of the remediation team. Since its inception, the ETSC has supported countless projects across all EPA Regions in almost all states and territories. This report highlights significant projects the ETSC supported in fiscal year 2015 (FY15). These projects addressed an array of environmental scenarios, such as remote mining contamination, expansive landfill waste, cumulative impacts from multiple contamination sources, and persistent threats from abandoned industrial sites. Constructing and testing new and innovative treatment technol

  19. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-05-15

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  20. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  1. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-11-04

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  2. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  3. Center for Coastline Security Technology, Year 3

    Science.gov (United States)

    2008-05-01

    Figure 2.6.8: Close-Up Photograph of RPUUV Tail Section. Figure 2.6.9: Force and moments applied on a hydrofoil . Figure 2.6.10: The NACA 21016... hydrofoil profile. Florida Atlantic University 4/28/08 Page 10 Center for Coastline Security Technology Year Three-Final Report Figure...as a 3D wing with a NACA 21016 hydrofoil profile (Figure 2.6.10) held by 3 cylinders (Figure 2.6.8). Center for Coastline Security Technology Year

  4. Planning and Management of Technology Deployment Center

    International Nuclear Information System (INIS)

    Park, Jae Won; Joo, Po Kook; Kim, Jun Yeon and others

    2005-08-01

    The R and D contents are summarized as follows ; Models were set-up for transferring the developed technologies to the industry and managing technology deployment center to vitalize the commercialization and then the set-up model was tried to apply for transferring technologies for commercialization and to define interfaces between the R and D and industrial applications In this project, new products and processes were developed for promoting the commercialization. Infra-structures were firmly set-up for the venture company promotion and technology deployment developed during executing the proton Engineering frontier Project. Commercialization methodology connection with industrial companies were studied by outside specializing institute. Development of gem-stone coloring and new photo catalyst producing techniques are very high value-adding technologies, therefore, experimental and theoretical R and D were transacted simultaneously to obtain the originality of the technology. The theoretical R and D was committed to a specialist outside

  5. CSPMS supported by information technology

    Science.gov (United States)

    Zhang, Hudan; Wu, Heng

    This paper will propose a whole new viewpoint about building a CSPMS(Coal-mine Safety Production Management System) by means of information technology. This system whose core part is a four-grade automatic triggered warning system achieves the goal that information transmission will be smooth, nondestructive and in time. At the same time, the system provides a comprehensive and collective technology platform for various Public Management Organizations and coal-mine production units to deal with safety management, advance warning, unexpected incidents, preplan implementation, and resource deployment at different levels. The database of this system will support national related industry's resource control, plan, statistics, tax and the construction of laws and regulations effectively.

  6. SAVANNAH RIVER TECHNOLOGY CENTER MONTHLY REPORT AUGUST 1992

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, J.M.

    1999-06-21

    'This monthly report summarizes Programs and Accomplishments of the Savannah River Technology Center in support of activities at the Savannah River Site. The following categories are addressed: Reactor, Tritium, Separations, Environmental, Waste Management, General, and Items of Interest.'

  7. St. Luke's Medical Center: technologizing health care

    International Nuclear Information System (INIS)

    Tumanguil, S.S.

    1994-01-01

    The computerization of the St. Luke's Medical Center improved the hospital administration and management, particularly in nuclear medicine department. The use of computer-aided X-ray simulator machine and computerized linear accelerator machine in diagnosing and treating cancer are the most recent medical technological breakthroughs that benefited thousands of Filipino cancer patients. 4 photos

  8. Advanced Life Support Project: Crop Experiments at Kennedy Space Center

    Science.gov (United States)

    Sager, John C.; Stutte, Gary W.; Wheeler, Raymond M.; Yorio, Neil

    2004-01-01

    Crop production systems provide bioregenerative technologies to complement human crew life support requirements on long duration space missions. Kennedy Space Center has lead NASA's research on crop production systems that produce high value fresh foods, provide atmospheric regeneration, and perform water processing. As the emphasis on early missions to Mars has developed, our research focused on modular, scalable systems for transit missions, which can be developed into larger autonomous, bioregenerative systems for subsequent surface missions. Components of these scalable systems will include development of efficient light generating or collecting technologies, low mass plant growth chambers, and capability to operate in the high energy background radiation and reduced atmospheric pressures of space. These systems will be integrated with air, water, and thermal subsystems in an operational system. Extensive crop testing has been done for both staple and salad crops, but limited data is available on specific cultivar selection and breadboard testing to meet nominal Mars mission profiles of a 500-600 day surface mission. The recent research emphasis at Kennedy Space Center has shifted from staple crops, such as wheat, soybean and rice, toward short cycle salad crops such as lettuce, onion, radish, tomato, pepper, and strawberry. This paper will review the results of crop experiments to support the Exploration Initiative and the ongoing development of supporting technologies, and give an overview of capabilities of the newly opened Space Life Science (SLS) Lab at Kennedy Space Center. The 9662 square m (104,000 square ft) SLS Lab was built by the State of Florida and supports all NASA research that had been performed in Hanger-L. In addition to NASA research, the SLS Lab houses the Florida Space Research Institute (FSRI), responsible for co-managing the facility, and the University of Florida (UF) has established the Space Agriculture and Biotechnology Research and

  9. Manufacturing Technology Information Analysis Center: Knowledge Is Strength

    Science.gov (United States)

    Safar, Michal

    1992-01-01

    The Center's primary function is to facilitate technology transfer within DoD, other government agencies and industry. The DoD has recognized the importance of technology transfer, not only to support specific weapon system manufacture, but to strengthen the industrial base that sustains DoD. MTIAC uses an experienced technical staff of engineers and information specialists to acquire, analyze, and disseminate technical information. Besides ManTech project data, MTIAC collects manufacturing technology from other government agencies, commercial publications, proceedings, and various international sources. MTIAC has various means of disseminating this information. Much of the technical data is on user accessible data bases. The Center researches and writes a number of technical reports each year and publishes a newsletter monthly. Customized research is performed in response to specific inquiries from government and industry. MTIAC serves as a link between Government and Industry to strengthen the manufacturing technology base through the dissemination of advanced manufacturing information.

  10. Information and consulting center in plasma technologies

    International Nuclear Information System (INIS)

    Vizireanu, S.; Aldea, E.; Mitu, B.; Dinescu, G.

    2001-01-01

    Plasma technologies are clean, non-expensive, and easy to adapt to small-scale production. They are largely used in various modern sectors of research, industry, medicine, biology and environmental protection. At the present time a pressure to transfer the knowledge from education and research sectors toward the industrial ones was established by the financing policies at national and European levels. Nevertheless, mainly in the last decade, an informational gap sets up in Romania between the suppliers of know-how in the plasma technologies and their beneficiaries. The newly appearing companies have little knowledge about the possibilities of our research and education. In turn, the research and education sectors do not know what companies are using nowadays plasma technologies, what kinds of technologies are needed and what aspects should be stressed in educational activity. The Information and Consulting Center in Plasma Technologies is an infrastructure project aiming at gathering information and expertise in plasma technologies with emphasizing on the Romanian capabilities. The information is accessible via Internet at the address http://www.alpha2.infim.ro. By accessing the center web page one enters into the main menu or it is possible to navigate by choosing key words, as for instance: objectives, plasma diagnostics, plasma technologies, which are listed in a dedicated search box. The information is organized in databases. In the database frame there are three main categories, which lead to detailed information about: - Users of plasma technologies, the technology type, the address; - Suppliers of plasma technologies, including the main research institutes with links to the relating Internet sites; - Education and training centers including the universities and their departments dedicated to plasma physics. The expertise is organized in three categories. They are instrumentation and equipment, plasma diagnostics and plasma technologies. In the

  11. The Center for Environmental Technology Innovative Technology Screening Process

    International Nuclear Information System (INIS)

    Bertrand, C.M.

    1995-02-01

    The Center for Environmental Technology's (CET) mission is to provide a fully integrated system for accelerated evaluation, development, commercialization, and public acceptance of creative environmental solutions which match the foremost demands in today's environmentally sensitive world. In short, CET will create a means to provide quick, effective solutions for environmental needs. To meet this mission objective, CET has created a unique and innovative approach to eliminating the usual barriers in developing and testing environmental technologies. The approach paves the way for these emerging, cutting-edge technologies by coordinating environmental restoration and waste management activities of industry, universities, and the government to: efficiently and effectively transfer technology to these users, provide market-driven, cost-effective technology programs to the public and DOE, and aid in developing innovative ideas by initiating efforts between DOE facilities and private industry. The central part to this mission is selecting and evaluating specific innovative technologies for demonstration and application at United States Department of Energy (DOE) installations. The methodology and criteria used for this selection, which is called the CET Innovative Technology Screening Process, is the subject of this paper. The selection criteria used for the screening process were modeled after other DOE technology transfer programs and were further developed by CET's Technology Screening and Evaluation Board (TSEB). The process benefits both CET and the proposing vendors by providing objective selection procedures based on predefined criteria. The selection process ensures a rapid response to proposing vendors, all technologies will have the opportunity to enter the selection process, and all technologies are evaluated on the same scale and with identical criteria

  12. User-centered Technologies For Blind Children

    Directory of Open Access Journals (Sweden)

    Jaime Sánchez

    2008-01-01

    Full Text Available The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathematical skills, navigation and orientation, and problem solving of blind children. Findings indicate significant improvements in learning and cognition from using audio-based tools specially tailored for the blind. That is, technologies for blind children, carefully tailored through user-centered design approaches, can make a significant contribution to cognitive development of these children. This paper contributes new insight into the design and implementation of audio-based virtual environments to facilitate learning and cognition in blind children.

  13. Integrated Support Center for Nuclear Nonproliferation and Security

    International Nuclear Information System (INIS)

    Kimura, Naohito; Naoi, Yosuke

    2010-01-01

    In April 2010, at the Nuclear Security Summit, Japan demonstrated its commitment to the strengthening of nuclear non-proliferation and nuclear security and announced the establishment of the Integrated Comprehensive Support Center for Nuclear Non-proliferation and Nuclear Security in the Japan Atomic Energy Agency (JAEA), under the guidance and authority of the Ministry of Education, Culture, Sports and Science and Technology (MEXT), and in cooperation with other ministries. The goal of the Center is to strengthen nuclear non-proliferation and security in emerging nuclear power countries by sharing Japan's accumulated experiences in its peaceful use of nuclear energy. To achieve its goal, the Center serves three functions: (1) human resource and capacity building, (2) infrastructure development and technical assistance and (3) international coordination and cooperation. The Center will offer three types of training courses to strengthen human resources and capacity building in emerging nuclear power countries. In the Training Course on Nuclear Security, the participants will learn the design and evaluation process for physical protection and detection of and response to illegal or unauthorized acts related to nuclear materials. They will learn these issues not only through lectures and training but also using mockup facilities and virtual reality systems. Second, in the Training Course on Safeguards and State System of Accounting for and Control of Nuclear Material (SSAC), the Center will teach the experience of advanced safeguards activities in Japan for its full-scale nuclear fuel cycle facilities as a non-nuclear weapon state. The participants will learn the IAEA and national safeguards systems, the material accounting system and inspector activities. Third, in the Training on the International Nuclear Nonproliferation Framework, the participants will learn the international framework of nuclear non-proliferation including the IAEA safeguards system and

  14. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; hide

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  15. The Stanford University US-Japan Technology Management Center

    National Research Council Canada - National Science Library

    Dasher, Richard

    2002-01-01

    This grant established the U.S.-Japan Technology Management Center, Stanford University School of Engineering, as an ongoing center of excellence for the study of emerging trends and interrelationships between technology...

  16. Hybrid Life Support System Technology Demonstrations

    Science.gov (United States)

    Morrow, R. C.; Wetzel, J. P.; Richter, R. C.

    2018-02-01

    Demonstration of plant-based hybrid life support technologies in deep space will validate the function of these technologies for long duration missions, such as Mars transit, while providing dietary variety to improve habitability.

  17. IAEA and International Science and Technology Center sign cooperative agreement

    International Nuclear Information System (INIS)

    2008-01-01

    Full text: The IAEA and the International Science and Technology Center (ISTC) today signed an agreement that calls for an increase in cooperation between the two organizations. The memorandum of understanding seeks to amplify their collaboration in the research and development of applications and technology that could contribute to the IAEA's activities in the fields of verification and nuclear security, including training and capacity building. IAEA Safeguards Director of Technical Support Nikolay Khlebnikov and ISTC Executive Director Adriaan van der Meer signed the Agreement at IAEA headquarters in Vienna on 22 October 2008. (IAEA)

  18. NASA Glenn Research Center Support of the ASRG Project

    Science.gov (United States)

    Wilson, Scott D.; Wong, Wayne A.

    2014-01-01

    A high efficiency radioisotope power system is being developed for long-duration NASA space science missions. The U.S. Department of Energy (DOE) managed a flight contract with Lockheed Martin Space Systems Company (LMSSC) to build Advanced Stirling Radioisotope Generators (ASRGs), with support from NASA Glenn Research Center (GRC). Sunpower Inc. held two parallel contracts to produce Advanced Stirling Convertors (ASCs), one with DOELockheed Martin to produce ASC-F flight units, and one with GRC for the production of ASC-E3 engineering unit pathfinders that are built to the flight design. In support of those contracts, GRC provided testing, materials expertise, government furnished equipment, inspections, and related data products to DOELockheed Martin and Sunpower. The technical support includes material evaluations, component tests, convertor characterization, and technology transfer. Material evaluations and component tests have been performed on various ASC components in order to assess potential life-limiting mechanisms and provide data for reliability models. Convertor level tests have been used to characterize performance under operating conditions that are representative of various mission conditions. Technology transfers enhanced contractor capabilities for specialized production processes and tests. Despite termination of flight ASRG contract, NASA continues to develop the high efficiency ASC conversion technology under the ASC-E3 contract. This paper describes key government furnished services performed for ASRG and future tests used to provide data for ongoing reliability assessments.

  19. Tiger Team Assessment, Energy Technology Engineering Center

    International Nuclear Information System (INIS)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies

  20. Tiger Team Assessment, Energy Technology Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

  1. 76 FR 39811 - International Center for Technology Assessment and the Center for Food Safety; Noxious Weed...

    Science.gov (United States)

    2011-07-07

    ... dated July 18, 2002, the International Center for Technology Assessment and the Center for Food Safety... Inspection Service [Docket No. APHIS-2011-0081] International Center for Technology Assessment and the Center for Food Safety; Noxious Weed Status of Kentucky Bluegrass Genetically Engineered for Herbicide...

  2. Scientific Data Management Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Vouk, Mladen A.

    2013-01-15

    Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Fortunately, the data management problems encountered by most scientific domains are common enough to be addressed through shared technology solutions. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation, analysis, or visualization engine. These processes are complicated by the fact that scientific data are structured differently for specific application domains, and are stored in specialized file formats. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Specialized feature discovery and statistical analysis techniques are needed before the data can be understood or visualized. Furthermore, interactive analysis requires techniques for efficiently selecting subsets of the data. Finally, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration. The SDM center was established under the SciDAC program to address these issues. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced

  3. Designing Corporate Databases to Support Technology Innovation

    Science.gov (United States)

    Gultz, Michael Jarett

    2012-01-01

    Based on a review of the existing literature on database design, this study proposed a unified database model to support corporate technology innovation. This study assessed potential support for the model based on the opinions of 200 technology industry executives, including Chief Information Officers, Chief Knowledge Officers and Chief Learning…

  4. iHealth: supporting health by technology

    NARCIS (Netherlands)

    Ossebaard, Hans Cornelis

    2012-01-01

    This thesis is about how people support their health through the use of technology. It focuses on web-based information and communication technology (ICT). Many factors play a role in the interaction between people, technology and context. In five studies we have investigated a few of them. The

  5. Engineering Technical Support Center Annual Report Fiscal Year 2015

    Science.gov (United States)

    The United States Environmental Protection Agency (EPA or Agency) Office of Research and Development (ORD) created the Engineering Technical Support Center (ETSC) in 1987, one of several technical support centers created as part of the Technical Support Project (TSP). ETSC provid...

  6. Logistics Operations Management Center: Maintenance Support Baseline (LOMC-MSB)

    Science.gov (United States)

    Kurrus, R.; Stump, F.

    1995-01-01

    The Logistics Operations Management Center Maintenance Support Baseline is defined. A historical record of systems, applied to and deleted from, designs in support of future management and/or technical analysis is provided. All Flight elements, Ground Support Equipment, Facility Systems and Equipment and Test Support Equipment for which LOMC has responsibilities at Kennedy Space Center and other locations are listed. International Space Station Alpha Program documentation is supplemented. The responsibility of the Space Station Launch Site Support Office is established.

  7. Technologies to support industrial processes

    International Nuclear Information System (INIS)

    Palazzi, G.; Savelli, D.

    1989-05-01

    Control and measuring techniques applied to industry have the common aim of increasing safety, reliability and plant availability. The industrial monitoring system needs a lot of sensors, whose signals, elaborated and interpreted, allow one to define the best working condition; moreover control instruments perform a diagnosis related to damages and breakages. The Experimental Engineering Division of ENEA's Thermal Reactor Department has developed sensors and measuring apparatus and has acquired advanced control techniques. All these systems, containing an original software, have been applied to industrial process problems and/or to experimental facilities both to increase reliability and to understand better process physics. Division activities are grouped in four sectors: non-destructive examinations (ultrasonic, eddy current, thermography, holographic interpherometry, penetrant liquids and magnetoscopy); innovative sensors (heated thermocouples, optical fiber sensors); advanced measuring systems (laser technology for fluidodynamic measures, nuclear radiation techniques, infrared measuring, mass spectrometer, hot-film anemometer, chromatographic apparatus); advanced technologies for diagnosis and signal analysis (digital image processing, statistical analysis). (author)

  8. User-Centered Design and Interactive Health Technologies for Patients

    Science.gov (United States)

    De Vito Dabbs, Annette; Myers, Brad A.; Mc Curry, Kenneth R.; Dunbar-Jacob, Jacqueline; Hawkins, Robert P.; Begey, Alex; Dew, Mary Amanda

    2010-01-01

    Despite recommendations that patients be involved in the design and testing of health technologies, few reports describe how to involve patients in systematic and meaningful ways to ensure that applications are customized to meet their needs. User-centered design (UCD) is an approach that involves end-users throughout the development process so that technology support tasks, are easy to operate, and are of value to users. In this paper we provide an overview of UCD and use the development of Pocket Personal Assistant for Tracking Health (Pocket PATH), to illustrate how these principles and techniques were applied to involve patients in the development of this interactive health technology. Involving patient-users in the design and testing ensured functionality and usability, therefore increasing the likelihood of promoting the intended health outcomes. PMID:19411947

  9. A dedicated fund supports technological innovation

    CERN Multimedia

    Katarina Anthony

    2010-01-01

    The Knowledge and Technology Transfer (KTT) Group is calling on CERN Departments to take their technology out of the confines of the laboratory and make it ready for dissemination. For the first time, projects can apply for financial support from the newly established KTT Fund.   Scientific inquiry can lead to unexpected developments for society when researchers apply their expertise for public use. CERN actively encourages this transfer of knowledge and technology and, for the first time, has created a dedicated fund to provide financial support to projects aiming at disseminating their technologies to external audiences. CERN’s technology transfer schemes were formalised in the recent Policy on the Management of Intellectual Property in Technology Transfer, approved in March. Revenues generated by commercial exploitation will be distributed between the members of the team that developed the technology, their Department, and the KTT Fund for reinvestment in further KTT projects. &qu...

  10. Center for BioBased Binders and Pollution Reduction Technology

    Energy Technology Data Exchange (ETDEWEB)

    Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)

    2013-07-01

    Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.

  11. Program strategy document for the Nuclear Materials Transportation Technology Center

    International Nuclear Information System (INIS)

    Jefferson, R.M.

    1979-07-01

    A multiyear program plan is presented which describes the program of the Nuclear Materials Transportation Technology Center (TIC) at Sandia Laboratories. The work element plans, along with their corresponding work breakdown structures, are presented for TTC activities in the areas of Technology and Information Center, Systems Development, Technology, and Institutional Issues for the years from 1979 to 1985

  12. SDM center technologies for accelerating scientific discoveries

    International Nuclear Information System (INIS)

    Shoshani, Arie; Altintas, Ilkay; Choudhary, Alok; Critchlow, Terence; Kamath, Chandrika; Ludaescher, Bertram; Nieplocha, Jarek; Parker, Steve; Ross, Rob; Samatova, Nagiza; Vouk, Mladen

    2007-01-01

    With the increasing volume and complexity of data produced by ultra-scale simulations and high-throughput experiments, understanding the science is largely hampered by the lack of comprehensive, end-to-end data management solutions ranging from initial data acquisition to final analysis and visualization. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced data management technologies to DOE application scientists in astrophysics, climate, fusion, and biology. Equally important, it established collaborations with these scientists to better understand their science as well as their forthcoming data management and data analytics challenges. Our future focus is on improving the SDM framework to address the needs of ultra-scale science during SciDAC-2. Specifically, we are enhancing and extending our existing tools to allow for more interactivity and fault tolerance when managing scientists' workflows, for better parallelism and feature extraction capabilities in their data analytics operations, and for greater efficiency and functionality in users' interactions with local parallel file systems, active storage, and access to remote storage. These improvements are necessary for the scalability and complexity challenges presented by hardware and applications at ultra scale, and are complemented by continued efforts to work with application scientists in various domains

  13. International technology identification, transfer, and program support

    International Nuclear Information System (INIS)

    Kitchen, B.

    1993-01-01

    Savannah River Site (SRS) activities primarily address vitrification technologies being investigated with Japan and the former Soviet Union (FSU). They also support the overall management of EM's international activities

  14. Armstrong Flight Research Center Research Technology and Engineering Report 2015

    Science.gov (United States)

    Voracek, David F.

    2016-01-01

    I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

  15. How You Can Partner with NIH | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    NCI Technology Transfer Center (TTC) provides an array of agreements to support the National Cancer Institute's partnering. Deciding which type of agreement to use can be a challenge: CRADA, MTA, collaboration, agreement, CTA, Materials-CRADA

  16. Modern Data Center Services Supporting Science

    Science.gov (United States)

    Varner, J. D.; Cartwright, J.; McLean, S. J.; Boucher, J.; Neufeld, D.; LaRocque, J.; Fischman, D.; McQuinn, E.; Fugett, C.

    2011-12-01

    The National Oceanic and Atmospheric Administration's National Geophysical Data Center (NGDC) World Data Center for Geophysics and Marine Geology provides scientific stewardship, products and services for geophysical data, including bathymetry, gravity, magnetics, seismic reflection, data derived from sediment and rock samples, as well as historical natural hazards data (tsunamis, earthquakes, and volcanoes). Although NGDC has long made many of its datasets available through map and other web services, it has now developed a second generation of services to improve the discovery and access to data. These new services use off-the-shelf commercial and open source software, and take advantage of modern JavaScript and web application frameworks. Services are accessible using both RESTful and SOAP queries as well as Open Geospatial Consortium (OGC) standard protocols such as WMS, WFS, WCS, and KML. These new map services (implemented using ESRI ArcGIS Server) are finer-grained than their predecessors, feature improved cartography, and offer dramatic speed improvements through the use of map caches. Using standards-based interfaces allows customers to incorporate the services without having to coordinate with the provider. Providing fine-grained services increases flexibility for customers building custom applications. The Integrated Ocean and Coastal Mapping program and Coastal and Marine Spatial Planning program are two examples of national initiatives that require common data inventories from multiple sources and benefit from these modern data services. NGDC is also consuming its own services, providing a set of new browser-based mapping applications which allow the user to quickly visualize and search for data. One example is a new interactive mapping application to search and display information about historical natural hazards. NGDC continues to increase the amount of its data holdings that are accessible and is augmenting the capabilities with modern web

  17. Exploration Life Support Technology Development for Lunar Missions

    Science.gov (United States)

    Ewert, Michael K.; Barta, Daniel J.; McQuillan, Jeffrey

    2009-01-01

    Exploration Life Support (ELS) is one of NASA's Exploration Technology Development Projects. ELS plans, coordinates and implements the development of new life support technologies for human exploration missions as outlined in NASA's Vision for Space Exploration. ELS technology development currently supports three major projects of the Constellation Program - the Orion Crew Exploration Vehicle (CEV), the Altair Lunar Lander and Lunar Surface Systems. ELS content includes Air Revitalization Systems (ARS), Water Recovery Systems (WRS), Waste Management Systems (WMS), Habitation Engineering, Systems Integration, Modeling and Analysis (SIMA), and Validation and Testing. The primary goal of the ELS project is to provide different technology options to Constellation which fill gaps or provide substantial improvements over the state-of-the-art in life support systems. Since the Constellation missions are so challenging, mass, power, and volume must be reduced from Space Shuttle and Space Station technologies. Systems engineering analysis also optimizes the overall architecture by considering all interfaces with the life support system and potential for reduction or reuse of resources. For long duration missions, technologies which aid in closure of air and water loops with increased reliability are essential as well as techniques to minimize or deal with waste. The ELS project utilizes in-house efforts at five NASA centers, aerospace industry contracts, Small Business Innovative Research contracts and other means to develop advanced life support technologies. Testing, analysis and reduced gravity flight experiments are also conducted at the NASA field centers. This paper gives a current status of technologies under development by ELS and relates them to the Constellation customers who will eventually use them.

  18. Decision support software technology demonstration plan

    Energy Technology Data Exchange (ETDEWEB)

    SULLIVAN,T.; ARMSTRONG,A.

    1998-09-01

    The performance evaluation of innovative and alternative environmental technologies is an integral part of the US Environmental Protection Agency's (EPA) mission. Early efforts focused on evaluating technologies that supported the implementation of the Clean Air and Clean Water Acts. In 1986 the Agency began to demonstrate and evaluate the cost and performance of remediation and monitoring technologies under the Superfund Innovative Technology Evaluation (SITE) program (in response to the mandate in the Superfund Amendments and Reauthorization Act of 1986 (SARA)). In 1990, the US Technology Policy was announced. This policy placed a renewed emphasis on making the best use of technology in achieving the national goals of improved quality of life for all Americans, continued economic growth, and national security. In the spirit of the technology policy, the Agency began to direct a portion of its resources toward the promotion, recognition, acceptance, and use of US-developed innovative environmental technologies both domestically and abroad. Decision Support Software (DSS) packages integrate environmental data and simulation models into a framework for making site characterization, monitoring, and cleanup decisions. To limit the scope which will be addressed in this demonstration, three endpoints have been selected for evaluation: Visualization; Sample Optimization; and Cost/Benefit Analysis. Five topics are covered in this report: the objectives of the demonstration; the elements of the demonstration plan; an overview of the Site Characterization and Monitoring Technology Pilot; an overview of the technology verification process; and the purpose of this demonstration plan.

  19. Sensor technology more than a support.

    Science.gov (United States)

    Olsson, Anna; Persson, Ann-Christine; Bartfai, Aniko; Boman, Inga-Lill

    2018-03-01

    This interview study is a part of a project that evaluated sensor technology as a support in everyday activities for patients with memory impairment. To explore patients with memory impairment and their partners' experiences of using sensor technology in their homes. Five patients with memory impairment after stroke and three partners were interviewed. Individual semi-structured interviews were analyzed with qualitative content analysis. Installing sensor technology with individually prerecorded voice reminders as memory support in the home had a broad impact on patients' and their families' lives. These effects were both positive and negative. The sensor technology not only supported activities but also influenced the patients by changing behavior, providing a sense of security, independence and increased self-confidence. For the partners, the sensor technology eased daily life, but also gave increased responsibility for maintenance. Technical problems led to frustration and stress for the patients. The results indicate that sensor technology has potential to increase opportunities for persons with memory impairment to perform and participate in activities and to unburden their partners. The results may promote an understanding of how sensor technology can be used to support persons with memory impairment in their homes.

  20. Applied technology center business plan and market survey

    Science.gov (United States)

    Hodgin, Robert F.; Marchesini, Roberto

    1990-01-01

    Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

  1. Technological products to support the Venezuelan heavy oil development

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, J.; Negrin, Z.; Duran, M.; Vilera, M.; Santamaria, F. [PDVSA INTEVEP (Venezuela)

    2011-07-01

    In Venezuela, important reserves of heavy oil crude are located at the Orinoco oil belt and the challenge is to develop these fields in a safe and environmentally friendly way. To address this challenge, PDVSA Intevep has been developing cutting edge technologies for more than 30 years. The aim of this paper is to present the principal inventions of PDVSA Intevep and their application in the Venezuelan traditional areas. PDVSA Intevep is the technological development and research center of the Venezuelan national oil industry; they own 773 patents, 103 trademarks, 48 copyrights, 13 trade secrets and 35 products used in different technological areas. The technologies presented will be used in the Orinoco oil belt in support of Venezuelan technological sovereignty. PDVSA Intevep has developed and adapted many technologies aimed at putting oil resources at the service of the whole population and ending social inequalities.

  2. Two new research melters at the Savannah River Technology Center

    International Nuclear Information System (INIS)

    Gordon, J.R.; Coughlin, J.T.; Minichan, R.L.; Zamecnik, J.R.

    2000-01-01

    The Savannah River Technology Center (SRTC) is a US Department of Energy (DOE) complex leader in the development of vitrification technology. To maintain and expand this SRTC core technology, two new melter systems are currently under construction in SRTC. This paper discusses the development of these two new systems, which will be used to support current as well as future vitrification programs in the DOE complex. The first of these is the new minimelter, which is a joule-heated glass melter intended for experimental melting studies with nonradioactive glass waste forms. Testing will include surrogates of Defense Waste processing Facility (DWPF) high-level wastes. To support the DWPF testing, the new minimelter was scaled to the DWPF melter based on melt surface area. This new minimelter will replace an existing system and provide a platform for the research and development necessary to support the SRTC vitrification core technology mission. The second new melter is the British Nuclear Fuels, Inc., research melter system (BNFL melter), which is a scaled version of the BNFL low-activity-waste (LAW) melter proposed for vitrification of LAW at Hanford. It is designed to process a relatively large amount of actual radiative Hanford tank waste and to gather data on the composition of off-gases that will be generated by the LAW melter. Both the minimelter and BNFL melter systems consist of five primary subsystems: melter vessel, off-gas treatment, feed, power supply, and instrumentation and controls. The configuration and design of these subsystems are tailored to match the current system requirements and provide the flexibility to support future DOE vitrification programs. This paper presents a detailed discussion of the unique design challenges represented by these two new melter systems

  3. Information and Library Programs at the Technology Application Center (TAC).

    Science.gov (United States)

    Burch, Eugene

    The Technology Application Center (TAC) at the University of New Mexico is one of six National Aeronautics and Space Administration (NASA) regional dissemination centers originally established to disseminate NASA technology to private industry on a regional basis. A fee is charged for TAC's services so it has been market oriented and has sought to…

  4. The Center for Interactive Learning: An Incubator for Hatching Technology.

    Science.gov (United States)

    Coburn, Janet

    1999-01-01

    Describes a state-of-the-art community college facility (Center for Interactive Learning) that helps professors integrate technology and instruction to provide students with unique technology-enhanced learning experiences. The center's planning, distinctive features, and amenities are detailed. (GR)

  5. Leveraging Information Technology. Track IV: Support Services.

    Science.gov (United States)

    CAUSE, Boulder, CO.

    Seven papers from the 1987 CAUSE conference's Track IV, Support Services, are presented. They include: "Application Development Center" (John F. Leydon); "College Information Management System: The Design and Implementation of a Completely Integrated Office Automation and Student Information System" (Karen L. Miselis);…

  6. Library Technology Centers and Community Building: Yale University Library Electronic Text Center.

    Science.gov (United States)

    Goldenberg-Hart, Diane Y.

    1998-01-01

    Discusses various communities that have contributed to the development of the Yale University Library Electronic Text Center (ETC) and describes the evolution of the ETC from a center for the support of electronic texts in the humanities to an electronic resource center providing support in the creation of World Wide Web resources. (LRW)

  7. About TTC | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The TTC facilitates licensing and co-development partnerships between biomedical industry, academia, and government agencies and the research laboratories of the NCI and nine other institutes and centers of NIH.

  8. Using technology to support science inquiry learning

    Directory of Open Access Journals (Sweden)

    P John Williams

    2017-03-01

    Full Text Available This paper presents a case study of a teacher’s experience in implementing an inquiry approach to his teaching over a period of two years with two different classes. His focus was on using a range of information technologies to support student inquiry learning. The study demonstrates the need to consider the characteristics of students when implementing an inquiry approach, and also the influence of the teachers level of understanding and related confidence in such an approach. The case also indicated that a range of technologies can be effective in supporting student inquiry learning.

  9. Partnering Events | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  10. National Wind Technology Center sitewide, Golden, CO: Environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

  11. National Wind Technology Center sitewide, Golden, CO: Environmental assessment

    International Nuclear Information System (INIS)

    1996-11-01

    The National Renewable Energy Laboratory (NREL), the nation's primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate

  12. National Rehabilitation Hospital Assistive Technology Research Center

    National Research Council Canada - National Science Library

    Materson, RIchard

    1999-01-01

    .... The common theme in all the projects is application of technologies and methods developed or heavily used by the military to enhancement of medical rehabilitation and independent living for people with disabilities...

  13. National Rehabilitation Hospital Assistive Technology Research Center

    National Research Council Canada - National Science Library

    Toerge, John

    1998-01-01

    .... The common theme" in all the projects is application of technologies and methods developed or heavily used by the military to enhancement of medical rehabilitation and independent living for people with disabilities...

  14. Toward a Technology of "Nonaversive" Behavioral Support

    Science.gov (United States)

    Horner, Robert H.; Dunlap, Glen; Koegel, Robert L.; Carr, Edward G.; Sailor, Wayne; Anderson, Jacki; Albin, Richard W.; O'Neill, Robert E.

    2005-01-01

    Nonaversive behavior management is an approach to supporting people with undesirable behaviors that integrates technology and values. Although this approach has attracted numerous proponents, more adequate definition and empirical documentation are still needed. This article presents an introduction to the nonaversive approach. Important…

  15. Telescience and payload control support technologies

    Science.gov (United States)

    Donzelli, P.; Macavero, E.

    1988-10-01

    Technological options and their utilization scenarios for telescience implementation in manned space stations are outlined. On board and ground based data acquisition systems (SIMD and MIMD architecture, digital signal processing); and real time knowledge based systems to support principal investigators and payload specialists are discussed.

  16. Supporting women's leadership in science, technology, and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    A cutting-edge CA$15 million fellowships program, jointly funded by the Swedish International Development Cooperation Agency and IDRC, will support 140 doctoral and 60 early career women scientists in low and middle-income countries (LMICs) in the fields of science, technology, engineering, and mathematics.

  17. Technology development activities supporting tank waste remediation

    International Nuclear Information System (INIS)

    Bonner, W.F.; Beeman, G.H.

    1994-06-01

    This document summarizes work being conducted under the U.S. Department of Energy's Office of Technology Development (EM-50) in support of the Tank Waste Remediation System (TWRS) Program. The specific work activities are organized by the following categories: safety, characterization, retrieval, barriers, pretreatment, low-level waste, and high-level waste. In most cases, the activities presented here were identified as supporting tank remediation by EM-50 integrated program or integrated demonstration lead staff and the selections were further refined by contractor staff. Data sheets were prepared from DOE-HQ guidance to the field issued in September 1993. Activities were included if a significant portion of the work described provides technology potentially needed by TWRS; consequently, not all parts of each description necessarily support tank remediation

  18. User-centered Technologies For Blind Children

    OpenAIRE

    Jaime Sánchez

    2008-01-01

    The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathe...

  19. Technology Integration Initiative In Support of Outage Management

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Weatherby; David Gertman

    2012-07-01

    Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Often, command and control during outages is maintained in the outage control center where many of the underlying technologies supporting outage control are the same as those used in the 1980’s. This research reports on the use of advanced integrating software technologies and hand held mobile devices as a means by which to reduce cycle time, improve accuracy, and enhance transparency among outage team members. This paper reports on the first phase of research supported by the DOE Light Water Reactor Sustainability (LWRS) Program that is performed in close collaboration with industry to examine the introduction of newly available technology allowing for safe and efficient outage performance. It is thought that this research will result in: improved resource management among various plant stakeholder groups, reduced paper work, and enhanced overall situation awareness for the outage control center management team. A description of field data collection methods, including personnel interview data, success factors, end-user evaluation and integration of hand held devices in achieving an integrated design are also evaluated. Finally, the necessity of obtaining operations cooperation support in field studies and technology evaluation is acknowledged.

  20. Center of Excellence in Wireless Technology Objectives

    Indian Academy of Sciences (India)

    align their pre-competitive R&D efforts. Feed Indian requirements and specifications in International wireless Standards bodies. Develop IPR suitable for inclusion in 4G standards. Focus on Indian requirements (high system capacity). Involve all IITs/IISc in the IPR-driven research effort. Early technology trials of Indian-made ...

  1. Computational Support for Technology- Investment Decisions

    Science.gov (United States)

    Adumitroaie, Virgil; Hua, Hook; Lincoln, William; Block, Gary; Mrozinski, Joseph; Shelton, Kacie; Weisbin, Charles; Elfes, Alberto; Smith, Jeffrey

    2007-01-01

    Strategic Assessment of Risk and Technology (START) is a user-friendly computer program that assists human managers in making decisions regarding research-and-development investment portfolios in the presence of uncertainties and of non-technological constraints that include budgetary and time limits, restrictions related to infrastructure, and programmatic and institutional priorities. START facilitates quantitative analysis of technologies, capabilities, missions, scenarios and programs, and thereby enables the selection and scheduling of value-optimal development efforts. START incorporates features that, variously, perform or support a unique combination of functions, most of which are not systematically performed or supported by prior decision- support software. These functions include the following: Optimal portfolio selection using an expected-utility-based assessment of capabilities and technologies; Temporal investment recommendations; Distinctions between enhancing and enabling capabilities; Analysis of partial funding for enhancing capabilities; and Sensitivity and uncertainty analysis. START can run on almost any computing hardware, within Linux and related operating systems that include Mac OS X versions 10.3 and later, and can run in Windows under the Cygwin environment. START can be distributed in binary code form. START calls, as external libraries, several open-source software packages. Output is in Excel (.xls) file format.

  2. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...

  3. Bessines: Rebirth of a technological excellence center

    International Nuclear Information System (INIS)

    2014-06-01

    Areva's mining activity is rooted in the Limousin region of central France. For over 65 years, Bessines-sur-Gartempe has been closely involved with global energy and industrial issues. Geologists came here first as explorers, followed by miners and chemical engineers. This is the heritage on which Areva is drawing to help satisfy the steadily growing demand for energy. The SEPA's (Service d'etudes, de Procedes et Analyses) role is to develop new ways to process and use mineral ores. A world renowned R and D center, modernizing its research facilities is a key part of the program to revitalize the Bessines site. Between 1947 and 2001, close to 250 mining sites were exploited in France producing 76,000 tons of uranium. The Areva group (through the CEA and COGEMA) operated 55 % of these sites, all of which have been reclaimed today. UREKA is an educational center created by Areva to inform the public about uranium mining and French know-how in this field. This museum is unique in the world of mining. Depleted uranium is a byproduct of the uranium enrichment process. It harbors real energy potential that Areva intends to tap in the future. The effectiveness of lead-212 in targeting and destroying cancer cells was demonstrated several years ago. The Geosciences Center in made of four entities spread over 4,000 m 2 , regrouping the whole of Areva's mining knowledge and history. The wealth of mineralogical, petrographic and documentary data found there has been accumulated over more than 60 years of exploration and mining

  4. Spallation sources in support of technology

    Energy Technology Data Exchange (ETDEWEB)

    Pynn, R. [Los Alamos National Lab., NM (United States)

    1996-05-01

    In this contribution I summarize a number of recent experiments at the Los Alamos Neutron Science Center (LANSCE) that have contributed to strategic and applied research. A number of new tools have been developed to address these problems, including software that allows materials texture to be obtained during Rietveld refinement, Bragg-edge diffraction, resonant-neutron and proton radiography. These tools have the potential to impact basic as well as applied research. It is clear that a new, more powerful neutron source such as the planned Japanese Hadron Project will be able to use these and other techniques to contribute in a direct way to important industrial technologies. (author)

  5. Spallation sources in support of technology

    International Nuclear Information System (INIS)

    Pynn, R.

    1996-01-01

    In this contribution the author summarise a number of recent experiments at the Los Alamos Neutron Science Center (LANSCE) that have contributed to strategic and applied research. A number of new tools have been developed to address these problems, including software that allows materials texture to be obtained during Rietveld refinement, Bragg-edge diffraction, resonant-neutron and proton radiography. These tools have the potential to impact basic as well as applied research. It is clear that a new, more powerful neutron source such as the planned Japanese Hadron Project will be able to use these and other techniques to contribute in a direct way to important industrial technologies

  6. Texas Manufacturing Technology Center feasibility study for the Inland Regional Industrial Technology Institute

    International Nuclear Information System (INIS)

    1994-01-01

    This document presents the Texas Manufacturing Technology Center (TMTC) Business Plan to convert the Central Facility of the Superconducting Super Collider project to alternate uses. The plan is divided into six sections: (1) Executive Summary, (2) Market and Benefit Analysis, (3) Marketing Strategy, (4) Services, (5) Organization and Operations Overview, and (6) Financial Plan. Each area is supported by separate documents that address individual opportunities and challenges associated with transitioning the facility, and its asset base to new uses for benefit of the locality, state, region and nation

  7. Child Care Centers' Role in Support of Breastfeeding Families.

    Science.gov (United States)

    Garth, Emily; Messer, Abigail L; Spatz, Diane L

    2016-01-01

    The purpose of this study was to investigate individual child care centers' attitudes and policies related to breastfeeding in two distinct areas in Philadelphia. Little is known about individual centers' approach to breastfeeding despite returning to work being cited as a major barrier to continued breastfeeding. Data were collected by compiling a list of child care centers in the areas of study and conducting telephone surveys of the 166 centers that met inclusion criteria. Surveys were administered using an adapted tool from the New York State Department of Health. Data were analyzed using descriptive statistics. A total of 47 of the 166 (28%) of centers completed the survey. Results indicate there is room for improvement in education and training of staff on benefits of breastfeeding and human milk. The majority of centers (95%) surveyed indicated they would not feed an infant anything besides human milk unless specifically stated in a feeding plan. However, only 40% of centers had staff trained about benefits of breastfeeding and how to prepare and store human milk. Results varied between West Philadelphia and Center City. Widespread education of healthcare providers and child care center staff is necessary to ensure adherence to breastfeeding support guidelines and dissemination of accurate information to breastfeeding families. Nurses and other healthcare providers need to be aware of child care as a barrier to breastfeeding and the importance of providing comprehensive education and referral to community resources.

  8. 2017 Technology Showcase Presentations | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Presentations from the 2017 Technology Showcase by NIH Intramural Research Program scientists held at Frederick National Laboratories for Cancer Research on June 7, 2017. | [google6f4cd5334ac394ab.html

  9. Design and operation of the emergency support center, CAE

    International Nuclear Information System (INIS)

    Caro, R. J.; Lopez Trillo, E.

    2016-01-01

    The enhancements developed in Spain in the area of Emergency Management, as consequence of the accident at the Fukushima Dai-Ichi NPP in 2011, included the definition of new emergency response centers; Alternative Center for Emergency Management (CAGE) on each NPP and the Emergency Support Center (CAE), shared by all NPPs. This article summarizes the main features and operation activities undertaken since the establishment of the new CAE, centralized, external to the NPPs shared by all Spanish plants and managed by Tecnatom. (Author)

  10. Student Technology Use in a Self-Access Center

    Science.gov (United States)

    Castellano, Joachim; Mynard, Jo; Rubesch, Troy

    2011-01-01

    Technology has played an increasingly vital role in self-access learning over the past twenty years or so, yet little research has been conducted into learners' actual use of the technology both for self-directed learning and as part of everyday life. This paper describes an ongoing action research project at a self-access learning center (SALC)…

  11. SciDAC Visualization and Analytics Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Joy, Kenneth I. [Univ. of California, Davis, CA (United States)

    2014-09-14

    This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an "information big bang," which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies.

  12. Assistive technology for memory support in dementia.

    Science.gov (United States)

    Van der Roest, Henriëtte G; Wenborn, Jennifer; Pastink, Channah; Dröes, Rose-Marie; Orrell, Martin

    2017-06-11

    The sustained interest in electronic assistive technology in dementia care has been fuelled by the urgent need to develop useful approaches to help support people with dementia at home. Also the low costs and wide availability of electronic devices make it more feasible to use electronic devices for the benefit of disabled persons. Information Communication Technology (ICT) devices designed to support people with dementia are usually referred to as Assistive Technology (AT) or Electronic Assistive Technology (EAT). By using AT in this review we refer to electronic assistive devices. A range of AT devices has been developed to support people with dementia and their carers to manage their daily activities and to enhance safety, for example electronic pill boxes, picture phones, or mobile tracking devices. Many are commercially available. However, the usefulness and user-friendliness of these devices are often poorly evaluated. Although reviews of (electronic) memory aids do exist, a systematic review of studies focusing on the efficacy of AT for memory support in people with dementia is lacking. Such a review would guide people with dementia and their informal and professional carers in selecting appropriate AT devices. Primary objectiveTo assess the efficacy of AT for memory support in people with dementia in terms of daily performance of personal and instrumental activities of daily living (ADL), level of dependency, and admission to long-term care. Secondary objectiveTo assess the impact of AT on: users (autonomy, usefulness and user-friendliness, adoption of AT); cognitive function and neuropsychiatric symptoms; need for informal and formal care; perceived quality of life; informal carer burden, self-esteem and feelings of competence; formal carer work satisfaction, workload and feelings of competence; and adverse events. We searched ALOIS, the Specialised Register of the Cochrane Dementia and Cognitive Improvement Group (CDCIG), on 10 November 2016. ALOIS is

  13. Health information technology adoption in California community health centers.

    Science.gov (United States)

    Kim, Katherine K; Rudin, Robert S; Wilson, Machelle D

    2015-12-01

    National and state initiatives to spur adoption of electronic health records (EHRs) and health information exchange (HIE) among providers in rural and underserved communities have been in place for 15 years. Our goal was to systematically assess the impact of these initiatives by quantifying the level of adoption and key factors associated with adoption among community health centers in California. Cross-sectional statewide survey. We conducted a telephone survey of all California primary care community health centers (CHCs) from August to September 2013. Multiple logistic regressions were fit to test for associations between various practice characteristics and adoption of EHRs, meaningful use-certified EHRs, and HIE. For the multivariable model, we included those variables which were significant at the P = .10 level in the univariate tests. We received responses from 194 CHCs (73.5% response rate). Adoption of any EHRs (80.3%) and meaningful use-certified EHRs (94.6% of those with an EHR) was very high. Adoption of HIE is substantial (48.7%) and took place within a few years (mean = 2.61 years; SD = 2.01). More than half (54.7%) of CHCs are able to receive data into the EHR indicating some level of interoperability. Patient engagement capacity is moderate, with 21.6% offering a PHR, and 55.2% electronic visit summaries. Rural location and belonging to a multi-site clinic organization both increase the odds of adoption of EHRs, HIE, and electronic visit summary, with the odds ratio ranging from 0.63 to 3.28 (all P values adoption of health information technology (IT) in rural areas may be the result of both federal and state investments. As CHCs lack access to capital for investments, continued support of technology infrastructure may be needed for them to further leverage health IT to improve healthcare.

  14. Technology Transfer Center to Assume Patenting and Licensing Responsibilities | Poster

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) is undergoing a reorganization that will bring patenting and licensing responsibilities to the Shady Grove and Frederick offices by October 2015. The reorganization is a result of an effort begun in 2014 by NIH to improve the organizational structure of technology transfer at NIH to meet the rapid rate of change within science, technology, and industry, and to better align the science and laboratory goals with the licensing and patenting process.

  15. [Effectiveness of support for asbestos health consultation in health centers].

    Science.gov (United States)

    Nagamatsu, Yasuko

    2011-09-01

    In this research, we aimed to evaluate the support for asbestos health consultation in health centers. In this exploratory descriptive study, a self-administered original questionnaire was developed and used. Among all 517 health centers, valid responses were returned from 323 (62.5%) consenting centers. Consultations in the previous year ranged from 0-108 cases, with a facility median of 3.0 cases. Among staff members, 86.4% did not receive training and 35.4% had never used the manual. Workplaces that use asbestos within their jurisdiction were recognized by 39.2% of staff members, and 16.7% of these members always supported consultants psychologically. The staff members were not confident about asbestos health consultation: 71.2% for general questions, 76.2% for questions about asbestos-related diseases, and 76.4% for questions about risk of asbestos-related diseases; 51.4% were not confident about the Asbestos-Related Health Damage Relief System. Health center staff members who were significantly more confident were those who had more staff to work with; dealt with many consultations in the previous year; recognized the workplaces using asbestos within their jurisdiction; often used the manual and often psychologically supported consultants. According to the covariance structure analysis model, the 'use of support systems' consisting of 'the use of manual', 'training attendance' and 'recognition of workplaces that use asbestos' positively affected the frequency of psychological support (peffective in building the confidence of health center staff in relation to asbestos health consultation, although the use of these support systems was low.

  16. Cancer Detection, Diagnosis, and Treatment Technologies for Global Health: Supporting the developmen

    Science.gov (United States)

    NCI, Center for Global Health supports the development and validation of low-cost, portable technologies that can improve cancer detection, diagnosis, and treatment in low-and middle-income countries.

  17. Aerospace Communications Technologies in Support of NASA Mission

    Science.gov (United States)

    Miranda, Felix A.

    2016-01-01

    NASA is endeavoring in expanding communications capabilities to enable and enhance robotic and human exploration of space and to advance aero communications here on Earth. This presentation will discuss some of the research and technology development work being performed at the NASA Glenn Research Center in aerospace communications in support of NASAs mission. An overview of the work conducted in-house and in collaboration with academia, industry, and other government agencies (OGA) to advance radio frequency (RF) and optical communications technologies in the areas of antennas, ultra-sensitive receivers, power amplifiers, among others, will be presented. In addition, the role of these and other related RF and optical communications technologies in enabling the NASA next generation aerospace communications architecture will be also discussed.

  18. Center for Renewable Energy Science and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Billo, Richard; Rajeshwar, Krishnan

    2013-01-15

    The CREST research team conducted research that optimized catalysts used for the conversion of southwestern lignite into synthetic crude oil that can be shipped to nearby Texas refineries and power plants for development of transportation fuels and power generation. Research was also undertaken to convert any potential by-products of this process such as CO2 to useful chemicals and gases which could be recycled and used as feedstock to the synthetic fuel process. These CO2 conversion processes used light energy to drive the endogonic reduction reactions involved. The project was divided into two tasks: A CO2 Conversion Task, and a Catalyst Optimization Task. The CO2 Conversion task was aimed at developing molecular and solid state catalysts for the thermal, electro- and photocatalytic reduction of CO2 to reduced products such as simple feedstock compounds (e.g. CO, H2, CHOOH, CH2O, CH3OH and CH4). For example, the research team recycled CO that was developed from this Task and used it as a feedstock for the production of synthetic crude in the Catalyst Optimization Task. In the Catalyst Optimization Task, the research team conducted bench-scale experiments with the goal of reducing overall catalyst cost in support of several synthetic crude processes that had earlier been developed. This was accomplished by increasing the catalyst reactivity thus reducing required concentrations or by using less expensive metals. In this task the team performed parametric experiments in small scale batch reactors in an effort to improve catalyst reactivity and to lower cost. They also investigated catalyst robustness by testing lignite feedstocks that vary in moisture, h, and volatile content.

  19. TechPort Featured at Glenn Research Center's Technology Day

    Science.gov (United States)

    Owens, Jeannette P.; Diem, Priscilla S.

    2016-01-01

    The NASA Technology Portfolio (TechPort) System was featured at NASA Glenn Research Center's Technology Day on May 24, 2016. This event, which coincided with GRC's 75th Anniversary celebration, drew nearly 250 registered guests including aerospace and technology representatives, local business leaders, state and local government officials, and members of academia. GRC's Director of the Office of Technology Incubation and Innovation and Center Chief Technologist, John Sankovic, presented the opening remarks. Several technical and business-focused panel sessions were convened. NASA's Associate Administrator for the Space Technology Mission Directorate, Steve Jurczyk, GRC's Director of Space Flight Systems, Bryan Smith, and NASA astronaut and U.S. Navy Captain, Sunita Williams, were engaged as a panel for a discussion about "NASA's Journey to Mars: Science Fiction Meets Reality." Another panel moderated by the Executive Director of the Cleveland Water Alliance, Bryan Stubbs, involved a discussion with four GRC technologists on the subject of global water scarcity and water treatment concerns. The GRC panelists shared information on the development of snow-sensing, hyperspectral imaging, and non-equilibrium plasma technologies. Technology Day attendees received overviews of GRC's technologies and partnership objectives, and were introduced to areas for potential collaboration. They were also informed about opportunities to license technologies and how to do business with NASA.

  20. Technologies in support of CANDU development

    International Nuclear Information System (INIS)

    Turner, C.; Tapping, B.

    2005-01-01

    Atomic Energy of Canada, Ltd. (AECL) has significant research and development (R and D) programs designed to meet the needs of both existing CANDU reactors and new and evolving CANDU plant designs. These R and D programs cover a wide range of technology, from chemistry and materials support through to inspection and life management tools. Emphasis is placed on effective technology development programs for fuel channels, feeders and steam generators to ensure their operation through design life, and beyond. This paper specifically addresses how the R and D has been applied in the production of longer-lived pressure tubes for the most recent CANDU 6 reactors, and how this technology forms the basis for the pressure tubes of the Advanced CANDU Reactor (ACR). Similarly, AECL has developed solutions for other critical components such as calandria tubes, feeder pipe and steam generators. The paper also discusses how the R and D knowledge has been integrated into aging management databases and health monitoring tools. Since 1997, AECL has been working with CANDU utilities on comprehensive and integrated CANDU Plant Life Management (PLiM) programs for successful and reliable plant operation through design life and beyond. AECL has developed and implemented an advanced chemistry monitoring and diagnostic system, called ChemAND which allows on-line access by the operators to current and past chemistry conditions enabling appropriate responses and facilitating planning of shutdown maintenance actions. An equivalent tool for monitoring, trending and diagnosing thermal and mechanical data has also been developed; this tool is called ThermAND. AECL is developing the Maintenance Information, Monitoring, and Control (MIMC) system, which provide information to the user for condition-based decision-making in maintenance. To enable more effective inspections, surveillance and data collection, AECL has developed unique one-off tooling to carry out unanticipated inspection and repair

  1. Overview of Stirling Technology Research at NASA Glenn Research Center

    Science.gov (United States)

    Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

    2016-01-01

    Stirling Radioisotope Power Systems (RPSs) are under development to provide power on future space science missions where robotic spacecraft will orbit, fly by, land, or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. NASA Glenn Research Center's newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability and system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

  2. Canadian ATLAS data center to support CERN's LHC

    CERN Multimedia

    2006-01-01

    "The biggest science experiment in history is currently underway at the world-famous CERN labs in Switzerland, and Canada is poised to play a critical role in its success. Thanks to a $10.5 million investment announced by the Canada Foundation for Innovation (CFI), an ultra-sophisticated computing facility -- the ATLAS Data Center -- will be created to support the ATLAS project at CERN's Large Hadron Collider (LHC)." (1 page)

  3. Co-Development Agreements | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's TTC uses three different co-development agreements to help industry and academia interact and partner with National Institutes of Health laboratories and scientists to support technology development activities.

  4. INNOVATIVE TECHNOLOGIES OF LOGISTICAL SUPPORT OF TROOPS

    Directory of Open Access Journals (Sweden)

    S. V. Myamlin

    2017-12-01

    Full Text Available Purpose. Comprehensive and uninterrupted logistical support of troops is considered one of the main factors of successful conduct of hostilities by any state. The logistics support system, created in peacetime, is intended for use in the course of a military company. It is the link between the front and the economy of the country, and at the same time, it is one of the important factors affecting the combat operation. According to experts, changes in the geopolitical and military-strategic situation in Europe resulted also changes in the armed forces of states, including their logistical support, which is undergoing changes and is developing under the direct influence of the military strategy, the achievement of whose goals it is intended to provide. All this necessitates the search for new, more effective ways of solving logistical problems in modern combat. This is true today, including for the Armed Forces of Ukraine. Therefore, the purpose of the work is to consider and implement in practice the logistic support of the state power structures of innovations in the form of a new, improved product - the creation of modular complexes, including various block containers (kitchen-dining room, shower room, laundry, post-office, dispensary and others. They will dramatically change in the future the quality of resolving the issues of everyday life of servicemen during the performance of combat missions in emergency zones and with participation in armed conflicts. Methodology. The methodology is based on the main measures to improve the logistic support system in the near future, including the reorganization of the existing logistic support system and the creation of modular structures of forces and means that are easily adapted and subsequently targeted for specific tasks. Findings. A set of design documentation for the block - container for laundry and shower in the field is offered. Technological modules for combat (block-post, rear (kitchen

  5. Semantic technologies in a decision support system

    Science.gov (United States)

    Wasielewska, K.; Ganzha, M.; Paprzycki, M.; Bǎdicǎ, C.; Ivanovic, M.; Lirkov, I.

    2015-10-01

    The aim of our work is to design a decision support system based on ontological representation of domain(s) and semantic technologies. Specifically, we consider the case when Grid / Cloud user describes his/her requirements regarding a "resource" as a class expression from an ontology, while the instances of (the same) ontology represent available resources. The goal is to help the user to find the best option with respect to his/her requirements, while remembering that user's knowledge may be "limited." In this context, we discuss multiple approaches based on semantic data processing, which involve different "forms" of user interaction with the system. Specifically, we consider: (a) ontological matchmaking based on SPARQL queries and class expression, (b) graph-based semantic closeness of instances representing user requirements (constructed from the class expression) and available resources, and (c) multicriterial analysis based on the AHP method, which utilizes expert domain knowledge (also ontologically represented).

  6. Risk Management for Human Support Technology Development

    Science.gov (United States)

    jones, Harry

    2005-01-01

    NASA requires continuous risk management for all programs and projects. The risk management process identifies risks, analyzes their impact, prioritizes them, develops and carries out plans to mitigate or accept them, tracks risks and mitigation plans, and communicates and documents risk information. Project risk management is driven by the project goal and is performed by the entire team. Risk management begins early in the formulation phase with initial risk identification and development of a risk management plan and continues throughout the project life cycle. This paper describes the risk management approach that is suggested for use in NASA's Human Support Technology Development. The first step in risk management is to identify the detailed technical and programmatic risks specific to a project. Each individual risk should be described in detail. The identified risks are summarized in a complete risk list. Risk analysis provides estimates of the likelihood and the qualitative impact of a risk. The likelihood and impact of the risk are used to define its priority location in the risk matrix. The approaches for responding to risk are either to mitigate it by eliminating or reducing the effect or likelihood of a risk, to accept it with a documented rationale and contingency plan, or to research or monitor the risk, The Human Support Technology Development program includes many projects with independently achievable goals. Each project must do independent risk management, considering all its risks together and trading them against performance, budget, and schedule. Since the program can succeed even if some projects fail, the program risk has a complex dependence on the individual project risks.

  7. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  8. Centers for manufacturing technology: Industrial Advisory Committee Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  9. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    International Nuclear Information System (INIS)

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described

  10. The Role of Community Technology Centers in Promoting Youth Development

    Science.gov (United States)

    London, Rebecca A.; Pastor, Manuel, Jr.; Servon, Lisa J.; Rosner, Rachel; Wallace, Antwuan

    2010-01-01

    Recent data suggest that the digital divide between White and minority youth persists, particularly in terms of home access to computers and the Internet. Community technology centers (CTCs) are an important alternative access point, especially for low-income youth of color. Such institutions, however, do much more, providing not just access, but…

  11. Cleaner Technology in Denmark - support measures and regulatory efforts

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik

    2005-01-01

    Danish cleaner technology support policies have been successful in fostering innovations that reduce the invironmental impact of products and production. But the lack of enforcement support for cleaner technology in environmental permits has limited the overall impact.......Danish cleaner technology support policies have been successful in fostering innovations that reduce the invironmental impact of products and production. But the lack of enforcement support for cleaner technology in environmental permits has limited the overall impact....

  12. The Fermi Science Support Center Data Servers and Archive

    Science.gov (United States)

    Reustle, Alexander; Fermi Science Support Center

    2018-01-01

    The Fermi Science Support Center (FSSC) provides the scientific community with access to Fermi data and other products. The Gamma-Ray Burst Monitor (GBM) data is stored at NASA's High Energy Astrophysics Science Archive Research Center (HEASARC) and is accessible through their searchable Browse web interface. The Large Area Telescope (LAT) data is distributed through a custom FSSC interface where users can request all photons detected from a region on the sky over a specified time and energy range. Through its website the FSSC also provides planning and scheduling products, such as long and short term observing timelines, spacecraft position and attitude histories, and exposure maps. We present an overview of the different data products provided by the FSSC, how they can be accessed, and statistics on the archive usage since launch.

  13. INFORMATION TECHNOLOGIES IN INSURANCE SALES SUPPORT

    Directory of Open Access Journals (Sweden)

    Stofor Ovidiu-Ilie

    2012-07-01

    Full Text Available Insurance system in Romania is carried out with a constant natural activity, evolving quite honorably these times. This is largely due to the difficulty with which insurance is sold in normal economic conditions when it comes to prosperity. Although psychologists, led by Maslow believes that the protection needs are basic needs, along with the physiological one, on the priority list regarding procurement, insurance needs are for some Romanians, of minimum or no importance, so that they are either pushed to the bottom of the list, or even, as it most often happens, they are non existent. Current economic conditions and climate, urges caution on most fields, especially in terms of individual properties, including, how somewhat forced, life and physical integrity which are still considered property, if this aspect is not debated in terms of Christian or other religious dogma. In other words, many Romanians see insurance as a product that “is not up their alley” including it in the luxury category. Furthermore, the media shows, sometimes amplify certain cases of doubt in relations between insurance company - customer. Appropriate marketing, allied with the information technology can improve the complete relationship between the two entities - the offeror and the consumer. Through this study we aim to identify important issues that facilitate the sale of insurance, using information technology, given that the sales of these financial products through the "ancestral" methods are effective but not very efficient. We will follow, byanchoring to the current reality, the insurance utility and how to use information technologies in support of marketing (sales. The study itself was done by observing the results in practical work, from an insurance agency, but also related to what the literature offers. Because this study is currently underway, there are certainly some limitations of accuracy of results, which are adjusted "on the fly". Realizing

  14. Thirty Years Supporting Portable Arrays: The IRIS Passcal Instrument Center

    Science.gov (United States)

    Beaudoin, B. C.; Anderson, K. R.; Bilek, S. L.; Woodward, R.

    2014-12-01

    Thirty years have passed since establishment of the IRIS Program for the Array Seismic Studies of the Continental Lithosphere (PASSCAL). PASSCAL was part of a coordinated plan proposed to the National Science Foundation (NSF) defining the instrumentation, data collection and management structure to support a wide range of research in seismology. The PASSCAL program has surpassed the early goal of 6000 data acquisition channels with a current inventory of instrumentation capable of imaging from the near surface to the inner core. Here we present the evolution of the PASSCAL program from instrument depot to full service community resource. PASSCAL has supported close to 1100 PI driven seismic experiments since its inception. Instruments from PASSCAL have covered the globe and have contributed over 7400 SEED stations and 242 assembled data sets to the IRIS Data Management Center in Seattle. Since the combination in 1998 of the Stanford and Lamont instrument centers into the single PASSCAL Instrument Center (PIC) at New Mexico Tech, the facility has grown in scope by adding the EarthScope Array Operations Facility in 2005, the incorporation of the EarthScope Flexible Array, and a Polar support group in 2006. The polar support group enhances portable seismic experiments in extremely harsh polar environments and also extends to special projects such as the Greenland Ice Sheet Monitoring Network (GLISN) and the recent development effort for Geophysical Earth Observatory for Ice Covered Environments (GEOICE). Through these support efforts the PIC has established itself as a resource for field practices, engineered solutions for autonomous seismic stations, and a pioneer in successful seismic recording in polar environments. We are on the cusp of a new generation of instrumentation driven in part by the academic community's desire to record unaliased wavefields in multiple frequency bands and industry's interest in utilizing lower frequency data. As part of the recently

  15. The roles and functions of a lunar base Nuclear Technology Center

    Science.gov (United States)

    Buden, D.; Angelo, J. A., Jr.

    This paper describes the roles and functions of a special Nuclear Technology Center which is developed as an integral part of a permanent lunar base. Numerous contemporary studies clearly point out that nuclear energy technology will play a major role in any successful lunar/Mars initiative program and in the overall establishment of humanity's solar system civilization. The key role of nuclear energy in the providing power has been recognized. A Nuclear Technology Center developed as part of a permanent lunar base can also help bring about many other nuclear technology applications, such as producing radioisotopes for self-illumination, food preservation, waste sterilization, and medical treatment; providing thermal energy for mining, materials processing and agricultural; and as a source of emergency habitat power. Designing such a center will involve the deployment, operation, servicing and waste product management and disposal of megawatt class reactor power plants. This challenge must be met with a minimum of direct human support at the facility. Furthermore, to support the timely, efficient integration of this Nuclear Technology Center in the evolving lunar base infrastructure, an analog of such a facility will be needed here on Earth.

  16. The roles and functions of a lunar base Nuclear Technology Center

    International Nuclear Information System (INIS)

    Buden, D.; Angelo, J.A. Jr.

    1991-01-01

    This paper describes the roles and functions of a special Nuclear Technology Center which is developed as an integral part of a permanent lunar base. Numerous contemporary studies clearly point out that nuclear energy technology will play a major role in any successful lunar/Mars initiative program and in the overall establishment of humanity's solar system civilization. The key role of nuclear energy in the providing power has been recognized. A Nuclear Technology Center developed as part of of a permanent lunar base can also help bring about many other nuclear technology applications, such as producing radioisotopes for self-illumination, food preservation, waste sterilization, and medical treatment; providing thermal energy for mining, materials processing and agricultural; and as a source of emergency habitat power. Designing such a center will involve the deployment, operation, servicing and waste product management and disposal of megawatt class reactor power plants. This challenge must be met with a minimum of direct human support at the facility. Furthermore, to support the timely, efficient integration of this Nuclear Technology Center in the evolving lunar base infrastructure, an analog of such a facility will be needed here on Earth. 12 refs., 4 figs., 1 tab

  17. Analysis of suffering at work in Family Health Support Centers.

    Science.gov (United States)

    Nascimento, Débora Dupas Gonçalves do; Oliveira, Maria Amélia de Campos

    2016-01-01

    Analyzing the work process in the Family Health Support Center. An exploratory, descriptive case study using a qualitative approach. Focus groups were conducted with 20 workers of a Family Health Support Center, and the empirical material was subjected to content analysis technique and analyzed in light of Work Psychodynamics. The category of suffering is presented herein as arising from the dialectical contradiction between actual work and prescribed work, from resistance to the Family Health Support Center's proposal and a lack of understanding of their role; due to an immediatist and curative culture of the users and the Family Health Strategy; of the profile, overload and identification with work. The dialectical contradiction between expectations from Family Health Strategy teams and the work in the Family Health Support Center compromises its execution and creates suffering for workers. Analisar o processo de trabalho no Núcleo de Apoio à Saúde da Família. Estudo de caso exploratório, descritivo e de abordagem qualitativa. Grupos focais foram realizados com 20 trabalhadores do Núcleo de Apoio à Saúde da Família, o material empírico foi submetido à técnica de análise de conteúdo e analisado à luz da Psicodinâmica do Trabalho. Apresenta-se aqui a categoria sofrimento que neste estudo decorre da contradição dialética entre o trabalho real e o trabalho prescrito, da resistência à proposta do Núcleo de Apoio à Saúde da Família e da falta de compreensão de seu papel; da cultura imediatista e curativa do usuário e da Estratégia Saúde da Família; do perfil, sobrecarga e identificação com o trabalho. A contradição dialética entre expectativas das equipes da Estratégia Saúde da Família e o trabalho no Núcleo de Apoio à Saúde da Família compromete sua efetivação e gera sofrimento aos trabalhadores.

  18. Supporting Human Activities - Exploring Activity-Centered Computing

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Bardram, Jakob

    2002-01-01

    In this paper we explore an activity-centered computing paradigm that is aimed at supporting work processes that are radically different from the ones known from office work. Our main inspiration is healthcare work that is characterized by an extreme degree of mobility, many interruptions, ad......-hoc collaboration based on shared material, and organized in terms of well-defined, recurring, work activities. We propose that this kind of work can be supported by a pervasive computing infrastructure together with domain-specific services, both designed from a perspective where work activities are first class...... objects. We also present an exploratory prototype design and first implementation and present some initial results from evaluations in a healthcare environment....

  19. 75 FR 14128 - Center for Nanoscale Science and Technology Postdoctoral Researcher and Visiting Fellow...

    Science.gov (United States)

    2010-03-24

    ... (NIST) Center for Nanoscale Science and Technology (CNST) is establishing a financial assistance program... DEPARTMENT OF COMMERCE National Institute of Standards and Technology [Docket Number: 100311136-0140-01] Center for Nanoscale Science and Technology Postdoctoral Researcher and Visiting Fellow...

  20. She's supporting them; who's supporting her? Preschool center-level social-emotional supports and teacher well-being.

    Science.gov (United States)

    Zinsser, Katherine M; Christensen, Claire G; Torres, Luz

    2016-12-01

    Preschool teachers across the country have been charged to prepare children socially and emotionally for kindergarten. Teachers working in preschool centers are supporting children's social and emotional learning (SEL) within a rich ecology of emotion and social relationships and the present study considers how the supports implemented for children's SEL at the center-level are associated with teachers' psychological health and workplace experiences. Hierarchical linear models were constructed using data from the Head Start Family and Child Experiences Survey 2009 cohort. Results indicate that although teachers work in individual classrooms, they share common perceptions at the center-level of their workplace climate, access to support, and, although to a lesser extent, experience commonalities in psychological health and job satisfaction. Furthermore, in centers that had implemented more supports for children's SEL (including access to mental health consultants, classroom curriculum, and training and resources for teachers) teachers were less depressed, more satisfied with their jobs, felt more supported in managing challenging behavior, and viewed the workplace climate of their center as more positive. Findings are discussed in light of the national efforts to increase and retain a high-quality early childhood workforce. Copyright © 2016 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

  1. Accelerated Adoption of Advanced Health Information Technology in Beacon Community Health Centers.

    Science.gov (United States)

    Jones, Emily; Wittie, Michael

    2015-01-01

    To complement national and state-level HITECH Act programs, 17 Beacon communities were funded to fuel community-wide use of health information technology to improve quality. Health centers in Beacon communities received supplemental funding. This article explores the association between participation in the Beacon program and the adoption of electronic health records. Using the 2010-2012 Uniform Data System, trends in health information technology adoption among health centers located within and outside of Beacon communities were explored using differences in mean t tests and multivariate logistic regression. Electronic health record adoption was widespread and rapidly growing in all health centers, especially quality improvement functionalities: structured data capture, order and results management, and clinical decision support. Adoption lagged for functionalities supporting patient engagement, performance measurement, care coordination, and public health. The use of advanced functionalities such as care coordination grew faster in Beacon health centers, and Beacon health centers had 1.7 times higher odds of adopting health records with basic safety and quality functionalities in 2010-2012. Three factors likely underlie these findings: technical assistance, community-wide activation supporting health information exchange, and the layering of financial incentives. Additional technical assistance and community-wide activation is needed to support the use of functionalities that are currently lagging. © Copyright 2015 by the American Board of Family Medicine.

  2. Institutional Support : Centre for Research and Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    year-old science and technology research centre at Maseno University in western Kenya. The Centre focuses on science and technology research to influence both national policies and development practices at the community level. Currently ...

  3. Supporting teachers' technology integration in lesson plans

    NARCIS (Netherlands)

    Janssen, Noortje

    2017-01-01

    Lesson planning offers rich opportunities for teachers to consider and implement technology in the classroom. This dissertation investigated the design and effectiveness of supplementary information to assist pre-service teachers during the lesson planning process. Based on the Technological,

  4. Planning nuclear energy centers under technological and demand uncertainty

    International Nuclear Information System (INIS)

    Meier, P.M.; Palmedo, P.F.

    1976-01-01

    The question considered is whether new nuclear power plants should be located in nuclear energy centers, or ''power parks'' with co-located fabrication and reprocessing facilities. That issue has been addressed in a recent study by the Nuclear Regulatory Commission and remains under investigation at Brookhaven and elsewhere. So far, however, the advisability of this policy has been analyzed primarily within the framework of a single view of the future. Suggestions of the types of questions that should be asked regarding this policy if it is properly to be viewed as an example of decision making under uncertainty are made. It is concluded that ''A consideration of the various uncertainties involved in the question of dispersed vs. remote siting of energy facilities introduces a number of new elements into the analysis. On balance those considerations provide somewhat greater support for the clustered concept. The NEC approach seems to provide somewhat greater flexibility in accomodating possible future electricity generating technologies. Increased regulatory and construction efficiencies possible in an NEC reduces the impact of demand uncertainty as does the lower costs associated with construction acceleration or deceleration.'' It is also noted that, in the final analysis, ''it is the public's perception of the relative costs and benefits of a measure that determine the acceptability or unacceptability of a particular innovation,'' not the engineer's cost/benefit analysis. It is further noted that if the analysis can identify limits on analytical methods and models, it will not make the job of energy decision-making any easier, but it may make the process more responsive to its impact on society

  5. Technologies and experimental approaches in the NIH Botanical Research Centers

    Science.gov (United States)

    Barnes, Stephen; Birt, Diane F; Cassileth, Barrie R; Cefalu, William T; Chilton, Floyd H; Farnsworth, Norman R; Raskin, Ilya; van Breemen, Richard B; Weaver, Connie M

    2009-01-01

    There are many similarities between research on combinatorial chemistry and natural products and research on dietary supplements and botanicals in the NIH Botanical Research Centers. The technologies in the centers are similar to those used by other NIH-sponsored investigators. All centers rigorously examine the authenticity of botanical dietary supplements and determine the composition and concentrations of the phytochemicals therein, most often by liquid chromatography–mass spectrometry. Several of the centers specialize in fractionation and high-throughput evaluation to identify the individual bioactive agent or a combination of agents. Some centers are using DNA microarray analyses to determine the effects of botanicals on gene transcription with the goal of uncovering the important biochemical pathways they regulate. Other centers focus on bioavailability and uptake, distribution, metabolism, and excretion of the phytochemicals as for all xenobiotics. Because phytochemicals are often complex molecules, synthesis of isotopically labeled forms is carried out by plant cells in culture, followed by careful fractionation. These labeled phytochemicals allow the use of accelerator mass spectrometry to trace the tissue distribution of 14C-labeled proanthocyanidins in animal models of disease. State-of-the-art proteomics and mass spectrometry are also used to identify proteins in selected tissues whose expression and posttranslational modification are influenced by botanicals and dietary supplements. In summary, the skills needed to carry out botanical centers’ research are extensive and may exceed those practiced by most NIH investigators. PMID:18258642

  6. Advertising Technology and Visual Attraction of Cities Centers

    Directory of Open Access Journals (Sweden)

    Inaam Albazzaz

    2017-09-01

    Full Text Available Advertising technology represents a component of elements of the visual attraction in the urban scape, made its way transmission process of messages between the ends of the source ofinformation (sender and the Destination information (receiver of the final recipient of themessage, It serves as a social marked and a means of cultural expression, It is part of the inalienable in creating identity and determine the spatial relationships and also is a reflection ofurban culture to the community. This technology has become an increasing feature of the present era, characterized as the era of the three revolutions: (the information revolution, the technologyrevolution, and the media revolution, Where it became an integral part of the visual system surrounding of urban our environment in which we live,, And it worked to change the contemporary urban experience through the attraction and love to stay and stimulating social interactions within a decade and urban spaces that contain the contemporary urban forms, and this is what it will focus the research. The research’s problem is determined by :there is no clear perception about the definition of advertisement technology and its impact on the urban scape of the city centers according the concept of visual attraction. And clarify the goal of research in : Definition advertising technology and determine the most important aspects and indicators according the concept of visual attraction of the city centers. To achieve this goal was adopted the following approach: building a conceptual framework for technology advertising through definition of the basic concepts of research and review the historical development of it within the framework of the urban scape, and then a study of the most important intellectual concepts associated represented by (communication theory and built in investigating this technology (communication channel aims to deliver a message or information from the sender to the receiver

  7. Providing Co-Curricular Support: A Multi-Case Study of Engineering Student Support Centers

    Science.gov (United States)

    Lee, Walter C., Jr.

    2015-01-01

    In response to the student retention and diversity issues that have been persistent in undergraduate engineering education, many colleges have developed Engineering Student Support Centers (ESSCs) such as Minority Engineering Programs (MEPs) and Women in Engineering Programs (WEPs). ESSCs provide underrepresented students with co-curricular…

  8. Supporting Multiple Programs and Projects at NASA's Kennedy Space Center

    Science.gov (United States)

    Stewart, Camiren L.

    2014-01-01

    With the conclusion of the shuttle program in 2011, the National Aeronautics and Space Administration (NASA) had found itself at a crossroads for finding transportation of United States astronauts and experiments to space. The agency would eventually hand off the taxiing of American astronauts to the International Space Station (ISS) that orbits in Low Earth Orbit (LEO) about 210 miles above the earth under the requirements of the Commercial Crew Program (CCP). By privatizing the round trip journey from Earth to the ISS, the space agency has been given the additional time to focus funding and resources to projects that operate beyond LEO; however, adding even more stress to the agency, the premature cancellation of the program that would succeed the Shuttle Program - The Constellation Program (CxP) -it would inevitably delay the goal to travel beyond LEO for a number of years. Enter the Space Launch System (SLS) and the Orion Multipurpose Crew Vehicle (MPCV). Currently, the SLS is under development at NASA's Marshall Spaceflight Center in Huntsville, Alabama, while the Orion Capsule, built by government contractor Lockheed Martin Corporation, has been assembled and is currently under testing at the Kennedy Space Center (KSC) in Florida. In its current vision, SLS will take Orion and its crew to an asteroid that had been captured in an earlier mission in lunar orbit. Additionally, this vehicle and its configuration is NASA's transportation to Mars. Engineers at the Kennedy Space Center are currently working to test the ground systems that will facilitate the launch of Orion and the SLS within its Ground Services Development and Operations (GSDO) Program. Firing Room 1 in the Launch Control Center (LCC) has been refurbished and outfitted to support the SLS Program. In addition, the Spaceport Command and Control System (SCCS) is the underlying control system for monitoring and launching manned launch vehicles. As NASA finds itself at a junction, so does all of its

  9. The project of Esfahan Nuclear Technology Center (ENTEC) and the transfer of nuclear tecnology in Iran

    International Nuclear Information System (INIS)

    Khazaneh, Reza

    1977-01-01

    In 1974, the Atomic Energy Organization of Iran (AEOI) decided to set up a Nuclear Technology Center on Esfahan (ENTEC) in collaboration with France's Technicatome Company and the CEA. This center is scheduled to go into operation during 1976-1980. The purposes for setting up ENTEC are threefold: a. to give scientific and technical support to the operation of nuclear power plants and nuclear industries in Iran. b. to carry out research and development in the area of nuclear technology on an industrial level. c. to give supplementary education and training to the manpower needs for the AEOI. To carry out the program of technology transfer, temporary laboratories have been set up in Tehran for engineers, technicians and training programs have been organized primarily in France. The ENTEC project will also include a school for education of junior scientists and engineers in the field of nuclear technology

  10. Organizational Support of Technology Integration in One School in Lebanon

    Science.gov (United States)

    Zgheib, Rosine S.

    2013-01-01

    Technology has been at the center of heated debates in educational settings driving schools to compete for the best technological equipments. However, in Lebanon there is a lag in technology integration matching twenty first century advances. Several barriers related to teacher attitudes, lack of technical skills and organizational constraints to…

  11. Spatial Information Technology Center at Fulton-Montgomery Community College

    Science.gov (United States)

    Flinton, Michael E.

    2004-01-01

    The Spatial Information Technology Center (SITC) at Fulton-Montgomery Community College (FMCC) continued to fulfill its mission and charter by successfully completing its third year of operations under Congressional funding and NASA sponsorship. Third year operations (01 Oct 02 - 30 Sep 03) have been funded and conducted utilizing two authorized Research Grants NAG 13-00043 (via a one-year no-cost extension expiring Sep 03) and NAG 13-02053 (one-year no-cost extension expiring Sep 04). Drawdowns and reporting of fiscal activities for SlTC operations continues to pass through the Institute for the Application of Geo-spatial Technology (IAGT) at Cayuga Community College in Auburn, New York. Fiscal activity of the Center is reported quarterly via SF 272 to IAGT, thus this report contains only a budgetary overview and forecast of future expenditures for the remaining funds of NAG 13 - 02053. Funds from NAG 13 - 00043 were exhausted during the fourth quarter of fiscal year FY02 - 03, which necessitated initial draw down of NAG 13 - 02053. The IAGT receives no compensation for administrative costs as authorized and approved by NASA in each award budget. This report also includes the necessary addendums for each NAG award, as required by federal guidelines, though no reportable activities took place within this report period. Attached are the signed Report of New Technology/lnventions and a Final Property Report identifying qualifying equipment purchased by the Center. As an academic, economic and workforce development oriented program, the Center has made significant strides in bringing the technology, knowledge and applications of the spatial information technology field to the region it serves. Through the mission of the Center, the region's educational, economic development and work force communities have become increasingly educated to the benefits of spatial (Geospatial) technology, particularly in the region's K-12 arena. SlTC continues to positively affect the

  12. Establishment of the Center for Biomedical Technology Innovation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-12-15

    The report discussed the following topics: (1) Orthopedic Devices; (2) Hybrid Vector and Method Resulting in Protein Overproduction by Eukaryotic Cells; (3) Surgical Simulator; (4) CBTI (Center for Biomedical Technology Innovation) as an Incubator for Start-up Companies; (5) Voice-activated, computer-assisted surgical robotics; (6) Through transmission ultrasonic 3-D holography for diagnostic imaging; (7) CBTI's Scibermed{trademark} Virtual Institute (SVI); and (8) Laser Oxygenation Tomography.

  13. Establishment of the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Final Technical Report covers the eight sub-projects awarded in the first year and the five projects awarded in the second year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  14. ESTABLISHMENT OF THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2003-07-01

    Technical Progress Report describes progress made on the eight sub-projects awarded in the first year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of activity only.

  15. A Lunar Surface System Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.

    2011-01-01

    This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set

  16. How X-37 Technology Demonstration Supports Reusable Launch Vehicles

    Science.gov (United States)

    Manley, David J.; Cervisi, Richard T.; Staszak, Paul R.

    2000-01-01

    This presentation discusses, in viewgraph form, how X-37 Technology Demonstration Supports Reusable Launch Vehicles. The topics include: 1) X-37 Program Objectives; 2) X-37 Description; 3) X-37 Vehicle Characteristics; 4) X-37 Expands the Testbed Envelope to Orbital Capability; 5) Overview of X-37 Flight Test Program; 6) Thirty-Nine Technologies and Experiments are Being Demonstrated on the X-37; 7) X-37 Airframe/Structures Technologies; 8) X-37 Mechanical, Propulsion, and Thermal System Technologies and Experiments; 9) X-37 GN&C Technologies; 10) X-37 Avionics, Power, and Software Technologies and Experiments; and 11) X-37 Technologies and Experiments Support Reusable Launch Vehicle Needs.

  17. Development of Beam Utilization Technologies and Support for Users

    International Nuclear Information System (INIS)

    Kim, Kyeryung; Jung, Myunghwan; Noh, Yongoh; Lee, Sooyeon; Kim, Hyukwook; Kil, Jaekeun; Lee, Nayoung; Ra, Sekin; Lee, Miejeen; Kim, Sora

    2013-02-01

    The Final goals are to achieve the 2nd goals of the Proton Engineering Frontier Project, development of proton beam utilization technologies, to incubate the potential users, and to develop fundamental technologies. Based on these achievements, we are going to enhance the accelerator utilization and maximize contribution to the local society after accelerator construction completion. For the these goals, we were operating user program reflecting the results of 3rd step planning. We support 38 small projects during 2 years. As results of activation of beam utilization, we acquired 768 users at the end of 2012. We survey proton beam technology proposals, individuals and institutions participation letter of intent through the research of 'Planning of a support program for both basic research by using accelerator and manpower cultivation'. And inaugurated KOPUA (Korea Proton Accelerator User Association) on March 28, 2012 with 152 members. We secured experimental conditions at TR23 and TR103 and reflected in the target room design and operation scenarios via investigate the requirements. Through these requirements, we make a remote sample transfer system, beam regulating system, hot cell and sample transport container. Moreover, we develop proton beam technologies such as in-vivo proton beam irradiation system, comparison of the biological effects for pulse beam and continuous beam, basic experiments for the metal nanopaticle synthesis, research for radioactivatied samples and devices, conceptual design and calculation for neutron source target and calculation of the isotope production yield. Proton accelerator can be utilized in a variety of field, including NT, BT, IT, ST, ET, Nuclear, medical, and some of the user facilities required were constructed through this project, Experience for the construction and operation of these facilities can be reflected to the construction of the rest 8 target room of proton accelerator center

  18. Publications in academic medical centers: technology-facilitated culture clash.

    Science.gov (United States)

    Berner, Eta S

    2014-05-01

    Academic culture has a set of norms, expectations, and values that are sometimes tacit and sometimes very explicit. In medical school and other health professions educational settings, probably the most common norm includes placing a high value on peer-reviewed research publications, which are seen as the major evidence of scholarly productivity. Other features of academic culture include encouraging junior faculty and graduate students to share their research results at professional conferences and lecturing with slides as a major way to convey information. Major values that faculty share with journal editors include responsible conduct of research and proper attribution of others' words and ideas. Medical school faculty also value technology and are often quick to embrace technological advances that can assist them in their teaching and research. This article addresses the effects of technology on three aspects of academic culture: education, presentations at professional meetings, and research publications.The technologies discussed include online instruction, dissemination of conference proceedings on the Internet, plagiarism-detection software, and new technologies deployed by the National Center for Biotechnology Information, the home of PubMed. The author describes how the ease of deploying new technologies without faculty changing their norms and behavior in the areas of teaching and research can lead to conflicts of values among key stakeholders in the academic medical community, including faculty, journal editors, and professional associations. The implications of these conflicts and strategies for managing them are discussed.

  19. Water Reclamation Technology Development at Johnson Space Center

    Science.gov (United States)

    Callahan, Michael R.; Pickering, Karen

    2014-01-01

    Who We Are: A staff of approximately 14 BS, MS, and PhD-Level Engineers and Scientists with experience in Aerospace, Civil, Environmental, and Mechanical Engineering, Chemistry, Physical Science and Water Pollution Microbiology. Our Primary Objective: To develop the next generation water recovery system technologies that will support NASA's long duration missions beyond low-earth orbit.

  20. Future networks and technologies supporting innovative communications

    DEFF Research Database (Denmark)

    Prasad, Ramjee

    2012-01-01

    and applications. This paper focuses on the technological aspects of ubiquitous networking and communication technologies, including challenges related to green communications, and security, privacy and trust. The paper proposes a novel concept for a Wireless Innovative System for Dynamically Operating Mega...

  1. Brain-Based Learning With Technological Support

    Science.gov (United States)

    Miller, Anita

    2004-01-01

    Utilization of technology in secondary schools is varied and depends on the training and interest of the individual instructors. Even though technology has advanced way beyond its utilitarian roots of being viewed solely by educators as a useful machine for teachers to key exams and worksheets on, there are still many secondary educators who still…

  2. Available decontamination and decommissioning capabilities at the Savannah River Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Polizzi, L.M.; Norkus, J.K.; Paik, I.K.; Wooten, L.A.

    1992-08-19

    The Safety Analysis and Engineering Services Group has performed a survey of the Savannah River Technology Center (SRTC) technical capabilities, skills, and experience in Decontamination and Decommissioning (D&D) activities. The goal of this survey is to enhance the integration of the SRTC capabilities with the technical needs of the Environmental Restoration Department D&D program and the DOE Office of Technology Development through the Integrated Demonstration Program. This survey has identified technical capabilities, skills, and experience in the following D&D areas: Characterization, Decontamination, Dismantlement, Material Disposal, Remote Systems, and support on Safety Technology for D&D. This review demonstrates the depth and wealth of technical capability resident in the SRTC in relation to these activities, and the unique qualifications of the SRTC to supply technical support in the area of DOE facility D&D. Additional details on specific technologies and applications to D&D will be made available on request.

  3. Available decontamination and decommissioning capabilities at the Savannah River Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Polizzi, L.M.; Norkus, J.K.; Paik, I.K.; Wooten, L.A.

    1992-08-19

    The Safety Analysis and Engineering Services Group has performed a survey of the Savannah River Technology Center (SRTC) technical capabilities, skills, and experience in Decontamination and Decommissioning (D D) activities. The goal of this survey is to enhance the integration of the SRTC capabilities with the technical needs of the Environmental Restoration Department D D program and the DOE Office of Technology Development through the Integrated Demonstration Program. This survey has identified technical capabilities, skills, and experience in the following D D areas: Characterization, Decontamination, Dismantlement, Material Disposal, Remote Systems, and support on Safety Technology for D D. This review demonstrates the depth and wealth of technical capability resident in the SRTC in relation to these activities, and the unique qualifications of the SRTC to supply technical support in the area of DOE facility D D. Additional details on specific technologies and applications to D D will be made available on request.

  4. Available decontamination and decommissioning capabilities at the Savannah River Technology Center

    International Nuclear Information System (INIS)

    Polizzi, L.M.; Norkus, J.K.; Paik, I.K.; Wooten, L.A.

    1992-01-01

    The Safety Analysis and Engineering Services Group has performed a survey of the Savannah River Technology Center (SRTC) technical capabilities, skills, and experience in Decontamination and Decommissioning (D ampersand D) activities. The goal of this survey is to enhance the integration of the SRTC capabilities with the technical needs of the Environmental Restoration Department D ampersand D program and the DOE Office of Technology Development through the Integrated Demonstration Program. This survey has identified technical capabilities, skills, and experience in the following D ampersand D areas: Characterization, Decontamination, Dismantlement, Material Disposal, Remote Systems, and support on Safety Technology for D ampersand D. This review demonstrates the depth and wealth of technical capability resident in the SRTC in relation to these activities, and the unique qualifications of the SRTC to supply technical support in the area of DOE facility D ampersand D. Additional details on specific technologies and applications to D ampersand D will be made available on request

  5. Optimal Design of a Center Support Quadruple Mass Gyroscope (CSQMG

    Directory of Open Access Journals (Sweden)

    Tian Zhang

    2016-04-01

    Full Text Available This paper reports a more complete description of the design process of the Center Support Quadruple Mass Gyroscope (CSQMG, a gyro expected to provide breakthrough performance for flat structures. The operation of the CSQMG is based on four lumped masses in a circumferential symmetric distribution, oscillating in anti-phase motion, and providing differential signal extraction. With its 4-fold symmetrical axes pattern, the CSQMG achieves a similar operation mode to Hemispherical Resonant Gyroscopes (HRGs. Compared to the conventional flat design, four Y-shaped coupling beams are used in this new pattern in order to adjust mode distribution and enhance the synchronization mechanism of operation modes. For the purpose of obtaining the optimal design of the CSQMG, a kind of applicative optimization flow is developed with a comprehensive derivation of the operation mode coordination, the pseudo mode inhibition, and the lumped mass twisting motion elimination. The experimental characterization of the CSQMG was performed at room temperature, and the center operation frequency is 6.8 kHz after tuning. Experiments show an Allan variance stability 0.12°/h (@100 s and a white noise level about 0.72°/h/√Hz, which means that the CSQMG possesses great potential to achieve navigation grade performance.

  6. VIRTUAL COGNITIVE CENTERS AS INTELLIGENT SYSTEMS FOR MANAGEMENT INFORMATION SUPPORT OF REGIONAL SECURITY

    Directory of Open Access Journals (Sweden)

    A. V. Masloboev

    2014-03-01

    Full Text Available The paper deals with engineering problems and application perspectives of virtual cognitive centers as intelligent systems for information support of interagency activities in the field of complex security management of regional development. A research prototype of virtual cognitive center for regional security management in crisis situations, implemented as hybrid cloud service based on IaaS architectural framework with the usage of multi-agent and web-service technologies has been developed. Virtual cognitive center is a training simulator software system and is intended for solving on the basis of distributed simulation such problems as: strategic planning and forecasting of risk-sustainable development of regional socioeconomic systems, agents of management interaction specification synthesis for regional components security in different crisis situations within the planning stage of joint anti-crisis actions.

  7. Environmental products from EPRI`s Environmental Control Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Andes, G.M.; Maybach, G.B. [Electric Power Research Inst., Barker, NY (United States). Environmental Control Technology Center

    1994-12-31

    Since 1987, developments from the research at EPRI`s Environmental Control Technology Center (ECTC) have been applied to coal-fired utility power plants to maximize emissions control systems, decrease capital and operating costs, and increase system reliability. The ECTC has made several significant advancements in both wet and dry FGD technologies over the years and is currently being utilized to investigate many future environmental issues, such as the measurement and control of toxic compounds and SOx/NOx emissions. This paper discusses the equipment capabilities of the ECTC, the scope of ongoing research, and the industry benefits resulting from the EPRI products generated from the Center. Two specific case studies of environmental products from the Center are profiled to describe the development of products at the ECTC, and the transition of research products to commercial prototypes. One such product, the On-Line Chemistry Monitor, allows for real-time monitoring of critical FGD chemistry parameters, while the other, the Automatic Limestone Grind Control system, provides for precise control of reagent grind to maximize performance, cost, and utilization.

  8. Supporting the industrialisation of aerospace technologies

    CSIR Research Space (South Africa)

    Botha, M

    2015-10-01

    Full Text Available Globally, the aerospace industry is recognised as one of the most significant multipliers for economic development. Aerospace requires a technology injection to enhance industrialisation. An example is the Rooivalk development programme, which...

  9. A Technology Investigation Supporting Software Architecture and Analysis for Evolution

    National Research Council Canada - National Science Library

    Garlan, David

    2001-01-01

    In this report we summarize the approaches and result of the project "A Technology Investigation Supporting Software Architecture and Analysis for Evolution," carried out at Carnegie Mellon University...

  10. NASA Johnson Space Center SBIR STTR Program Technology Innovations

    Science.gov (United States)

    Krishen, Kumar

    2007-01-01

    The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

  11. 76 FR 11498 - Submission for OMB Review; Comment Request; Generic Submission of Technology Transfer Center (TTC...

    Science.gov (United States)

    2011-03-02

    ...; Comment Request; Generic Submission of Technology Transfer Center (TTC) External Customer Satisfaction... technology transfer customers and stakeholders have never been assessed systematically. Input from these... and instruments, contact John D. Hewes, Ph.D., Technology Transfer Specialist, Technology Transfer...

  12. Centered Differential Waveform Inversion with Minimum Support Regularization

    KAUST Repository

    Kazei, Vladimir

    2017-05-26

    Time-lapse full-waveform inversion has two major challenges. The first one is the reconstruction of a reference model (baseline model for most of approaches). The second is inversion for the time-lapse changes in the parameters. Common model approach is utilizing the information contained in all available data sets to build a better reference model for time lapse inversion. Differential (Double-difference) waveform inversion allows to reduce the artifacts introduced into estimates of time-lapse parameter changes by imperfect inversion for the baseline-reference model. We propose centered differential waveform inversion (CDWI) which combines these two approaches in order to benefit from both of their features. We apply minimum support regularization commonly used with electromagnetic methods of geophysical exploration. We test the CDWI method on synthetic dataset with random noise and show that, with Minimum support regularization, it provides better resolution of velocity changes than with total variation and Tikhonov regularizations in time-lapse full-waveform inversion.

  13. Future Directions in Rotorcraft Technology at Ames Research Center

    Science.gov (United States)

    Aiken, Edwin W.; Ormiston, Robert A; Young, Larry A.

    2000-01-01

    Members of the NASA and Army rotorcraft research community at Ames Research Center have developed a vision for 'Vertical Flight 2025'. This paper describes the development of that vision and the steps being taken to implement it. In an effort to realize the vision, consistent with both NASA and Army Aviation strategic plans, two specific technology development projects have been identified: (1) one focused on a personal transportation system capable of vertical flight (the 'Roto-Mobile') and (2) the other on small autonomous rotorcraft (which is inclusive of vehicles which range in grams of gross weight for 'MicroRotorcraft' to thousands of kilograms for rotorcraft uninhabited aerial vehicles). The paper provides a status report on these projects as well as a summary of other revolutionary research thrusts being planned and executed at Ames Research Center.

  14. Family-centered developmentally supportive care: the Swedish example.

    Science.gov (United States)

    Westrup, B

    2015-10-01

    The prematurely born infant is probably the most vulnerable patient in our hospitals due to the immaturity of all organ systems including the brain. Over recent years, the importance of neurodevelopmentally supportive care has been clarified. In addition, to provide the best possible treatment and environmental conditions for the vital functions of the infant to properly develop, we also must support the psychological processes of bonding and attachment between parents and their newborn infant, which is so crucial for long-term health and development. By integrating scientific findings from natural and behavioral science in multidisciplinary developmentally supportive intervention programs, recommendations for redesigning nurseries and integrating families have developed to meet these challenges. It not only is "baby- and family-friendly" but also has economic benefits and improves the long-term development of the child. The basis of family-centered developmentally supportive care interventions is the recognition that the newborn infant is a human being in his or her own right, and letting the caregivers be guided by the current needs of the individual infant and family. In this context, the Newborn Individualized Developmental Care and Assessment Program (NIDCAP) is unique since it is the only program designed to be implemented from the moment the infant is born. Different strategies can be used to support the nursing and medical teams to help the family become the primary caregivers of their own infants. Sweden has a long tradition of engaging parents in the actual care and of around-the-clock visiting hours. Nurseries have, or are remodeling to have, the facilities enabling parents to live in the units throughout the entire hospital stay. Skin-to-skin contact is widely implemented. In order to ensure that these strategies are in tune with the individual needs of the infant and the families, all major nurseries have trained NIDCAP professionals. Care and

  15. Establishing a support service for educational technology within a university

    Directory of Open Access Journals (Sweden)

    J. A. Longstaffe

    1996-12-01

    Full Text Available Over the past decade it has become increasingly apparent that computer technology is extremely effective in the support of teaching and learning. It has also become obvious that without proselytization and support, the adoption of this new method of teaching is patchy and frequently inappropriate. The raising of awareness, the training of staff and the provision of informed advice and support are necessary to facilitate the appropriate development of technology-supported learning within an institution.

  16. Application of Telemedicine Technologies to Long Term Spaceflight Support

    Science.gov (United States)

    Orlov, O. I.; Grigoriev, A. I.

    projects on space biology and medicine at the modern high level. In spite of the ISS international cooperation transparency space research programs require to follow the biomedicine ethics and provide confidentiality of the special medical information exchange. That can be achieved in the telemedicine support system built on the network principle. Presently we have all technical facilities needed to create such a system. In Russia activities on space telemedicicine support improvement are carried out by the State Scientific Center of the Russian Federation - Institute for Biomedical Problems of the Russian Academy of Sciences, Mission Control Center of the Russian Aviation and Space Agency, Space Biomedical Center for Training and Research and Yu. Gagarin Cosmonaut Training Center. Communications development and next generation Internet systems creation almost eliminate differences in the types of information technologies implementation both in the earth-based and near-earth space conditions. In prospect of the information community creation the telecommunication system of the near-earth space objects and its telemedicine element will become a natural part of the Earth unified information field that will open unlimited perspectives for flight support system improvement and space biomedical research conducting. Russia has unique data of numerous investigations on simulation of long, up to a year, effects of space flight factors on the human body. The sphere of situations studied by space medicine specialists embraced orbit manned space flights of the escalating duration (438 days in 1995). However a number of biomedical problems related to space flights didn't face optimal solutions. It's evident that during a space flight to Mars biomedical problems will be much more difficult in comparison with those of the orbit flights of the same duration. The summed up factors of such flights specify a level of the total medical risk that require assessment and application of

  17. Are health centers in Thailand ready for health information technology? : a national survey.

    Science.gov (United States)

    Kijsanayotin, Boonchai; Speedie, Stuart

    2006-01-01

    The Thailand universal health care coverage scheme was instituted in 2001 and The Thailand Ministry of Public Health (MOPH) is restructuring its information systems to support this reform. The MOPH anticipates developing computerized health information systems which can provide information for administration tasks and can improve both healthcare delivery and public health services. To achieve these target goals, knowledge about users and organizations is vital. The knowledge of how health center workers currently use information technology (IT), their knowledge of IT, and acceptance of IT are not only beneficial to policy makers but also to system designers and implementers. The primary objective of this study is to learn how health centers in Thailand use IT, the level of basic IT knowledge among their workers, and their acceptance of health IT. We surveyed a random cross sectional sample of 1,607 health centers representing the total of 9,806 in Thailand in 2005. With an 82% response rate, the preliminary results indicate that information technology usage is pervasive in health centers. The respondents showed a moderately high degree of health information technology acceptance with a modest level of basic IT knowledge. There were no differences in degrees of acceptance among the four geographic regions. The mean score of "intention to use IT" was 5.6 on a scale of 7 and the average basic IT knowledge score was 13 out of 20. These results suggests the possibility of project success if the national health center information system projects are developed and implemented.

  18. Supporting Teachers' Technology Integration: A Descriptive Analysis of Social and Teaching Presence in Technical Support Sessions

    Science.gov (United States)

    Albert, Jennifer L.; Blanchard, Margaret R.; Kier, Meredith W.; Carrier, Sarah J.; Gardner, Grant E.

    2014-01-01

    Given the importance of technology in today's society, many teacher professional development (TPD) efforts incorporate instructional technologies. Following TPD, little is known about how to adequately support teachers in the use of these instructional technologies. Supporting teachers in geographically distant schools is particularly challenging.…

  19. Integration of element technology and system supporting thermonuclear fusion

    International Nuclear Information System (INIS)

    2003-01-01

    A special committee for integrated system technology survey on thermonuclear fusion (TNF) was begun on June, 1999, under an aim to generally summarize whole of shapes on technology to realize TNF reactor to summarize present state of every technologies and their positioning in whole of their TNF technology. On a base of survey of these recent informations, this report is comprehensively summarized for an integrated system technology on TNF. It has outlines on magnetic field enclosing method, outlines on inertia enclosing method, element technology supporting TNF, new power generation techniques, and ripple effects on TNF technology. (G.K.)

  20. Support and Technology Transfer: Results and Accomplishments

    Science.gov (United States)

    2009-07-01

    Advanced Food Technology School of Enviromental and Biological Sciences New Brunswick, NJ 08903 FTR 213 Defense Logistics Agency 8725 John J. Kingsman Rd...Partners in and beyond the CORANET II Program, and maintain a high level of cooperation and rapport. The following modifications were issued :  0002

  1. Supporting indigenous women in science, technology, engineering ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    These programs, partly funded by Mexico's Consejo Nacional de Ciencia y Tecnologia (CONACYT) (National council of science and technology), have considerably improved the participation of indigenous people in the country's education system. However, there continue to be important challenges in advancement ...

  2. Getting Your Counselor to Support Technology Education

    Science.gov (United States)

    Preble, Brian C.

    2016-01-01

    Is there a disconnect between counselors and educators in technology and vocational education? What is counseling, and what is a school counselor's role in a secondary school setting? How can one work with his or her guidance staff to ensure that students better understand your course offerings? The development of relationships, knowledge, and…

  3. 75 FR 80830 - Proposed Collection; Comment Request; Technology Transfer Center External Customer Satisfaction...

    Science.gov (United States)

    2010-12-23

    ... Request; Technology Transfer Center External Customer Satisfaction Survey (NCI) SUMMARY: In compliance...: Technology Transfer Center External Customer Satisfaction Survey (NCI). Type of Information Collection...: Obtain information on the satisfaction of TTC's external customers with TTC customer services; collect...

  4. Risk analysis and technology assessment in support of technology development

    NARCIS (Netherlands)

    Wezel, van Annemarie P.; Lente, van Harro; Sandt, van de Johannes J.M.; Bouwmeester, Hans; Vandeberg, Rens L.J.; Sips, Adrienne J.A.M.

    2018-01-01

    Governments invest in “key enabling technologies,” such as nanotechnology, to solve societal challenges and boost the economy. At the same time, governmental agencies demand risk reduction to prohibit any often unknown adverse effects, and industrial parties demand smart approaches to reduce

  5. Scientific and educational center "space systems and technology"

    Science.gov (United States)

    Kovalev, I. V.; Loginov, Y. Y.; Zelenkov, P. V.

    2015-10-01

    The issues of engineers training in the aerospace university on the base of Scientific and Educational Center "Space Systems and Technology" are discussed. In order to improve the quality of education in the Siberian State Aerospace University the research work of students, as well as the practice- oriented training of engineers are introduced in the educational process. It was made possible as a result of joint efforts of university with research institutes of the Russian Academy of Science and industrial enterprises. The university experience in this area promotes the development of a new methods and forms of educational activities, including the project-oriented learning technologies, identifying promising areas of specialization and training of highly skilled engineers for aerospace industry and other institutions. It also allows you to coordinate the work of departments and other units of the university to provide the educational process in workshops and departments of the industrial enterprises in accordance with the needs of the target training. Within the framework of scientific and education center the students perform researches, diploma works and master's theses; the postgraduates are trained in advanced scientific and technical areas of enterprise development.

  6. Institutional overviews. Overview of the JAEA and the Nuclear Nonproliferation Science and Technology Center

    International Nuclear Information System (INIS)

    Senzaki, Masao

    2006-01-01

    The Nuclear Nonproliferation Science and Technology Center (NPSTC) was formed within the new Japan Atomic Energy Agency (JAEA) to carry out safeguards and material control duties for the JAEA. Development of technologies and procedures for safeguards is an important duty. In addition, the new NPSTC will assume a 'think tank' role in support of the nonproliferation regime, help train nonproliferation experts, and cooperate with academic, government and non-governmental organizations on nonproliferation issues. This report briefly summarizes the formation of the JAEA and describes the duties and structure of the NPSTC in detail. (author)

  7. The International Science and Technology Center (ISTC) and ISTC projects related to nuclear safety. Information review

    International Nuclear Information System (INIS)

    Tocheny, Lev V.

    2003-01-01

    The ISTC is an intergovernmental organization created ten years ago by Russia, USA, EU and Japan in Moscow. The Center supports numerous science and technology projects in different areas, from biotechnologies and environmental problems to all aspects of nuclear studies, including those focused on the development of effective innovative concepts and technologies in the nuclear field, in general, and for improvement of nuclear safety, in particular. The presentation addresses some technical results of the ISTC projects as well as methods and approaches employed by the ISTC to foster close international collaboration and manage projects towards fruitful results. (author)

  8. Technology-Supported Learning Environments in Science Classrooms in India

    Science.gov (United States)

    Gupta, Adit; Fisher, Darrell

    2012-01-01

    The adoption of technology has created a major impact in the field of education at all levels. Technology-supported classroom learning environments, involving modern information and communication technologies, are also entering the Indian educational system in general and the schools in Jammu region (Jammu & Kashmir State, India) in…

  9. Lifelong Learning and its support with new technologies

    NARCIS (Netherlands)

    Kalz, Marco

    2014-01-01

    This chapter provides an overview about the use of new technologies for lifelong learning. While in the past learning technologies were mostly provided by educational institutions to support a specific lifetime or shorter learning episodes nowadays more personal technologies are used for lifelong

  10. Teaching Practice Supported by Technology Use

    DEFF Research Database (Denmark)

    Jensen, Helle Bækkelund

    2006-01-01

    and the design and use of web sites is viewed as corresponding. It is the hypothesis of the research underlying this article that the design and use of a web site reflects the intentions and beliefs of the university teacher. As a result of this relation it should be possible to explore and analyse conceptions...... a range of beliefs and intentions about teaching and a corresponding use of technology....

  11. All Source Solution Decision Support Products Created for Stennis Space Center in Response to Hurricane Katrina

    Science.gov (United States)

    Ross, Kenton W.; Graham, William D.

    2007-01-01

    In the aftermath of Hurricane Katrina and in response to the needs of SSC (Stennis Space Center), NASA required the generation of decision support products with a broad range of geospatial inputs. Applying a systems engineering approach, the NASA ARTPO (Applied Research and Technology Project Office) at SSC evaluated the Center's requirements and source data quality. ARTPO identified data and information products that had the potential to meet decision-making requirements; included were remotely sensed data ranging from high-spatial-resolution aerial images through high-temporal-resolution MODIS (Moderate Resolution Imaging Spectroradiometer) products. Geospatial products, such as FEMA's (Federal Emergency Management Agency's) Advisory Base Flood Elevations, were also relevant. Where possible, ARTPO applied SSC calibration/validation expertise to both clarify the quality of various data source options and to validate that the inputs that were finally chosen met SSC requirements. ARTPO integrated various information sources into multiple decision support products, including two maps: Hurricane Katrina Inundation Effects at Stennis Space Center (highlighting surge risk posture) and Vegetation Change In and Around Stennis Space Center: Katrina and Beyond (highlighting fire risk posture).

  12. Crop Production for Advanced Life Support Systems - Observations From the Kennedy Space Center Breadboard Project

    Science.gov (United States)

    Wheeler, R. M.; Sager, J. C.; Prince, R. P.; Knott, W. M.; Mackowiak, C. L.; Stutte, G. W.; Yorio, N. C.; Ruffe, L. M.; Peterson, B. V.; Goins, G. D.

    2003-01-01

    The use of plants for bioregenerative life support for space missions was first studied by the US Air Force in the 1950s and 1960s. Extensive testing was also conducted from the 1960s through the 1980s by Russian researchers located at the Institute of Biophysics in Krasnoyarsk, Siberia, and the Institute for Biomedical Problems in Moscow. NASA initiated bioregenerative research in the 1960s (e.g., Hydrogenomonas) but this research did not include testing with plants until about 1980, with the start of the Controlled Ecological Life Support System (CELSS) Program. The NASA CELSS research was carried out at universities, private corporations, and NASA field centers, including Kennedy Space Center (KSC). The project at KSC began in 1985 and was called the CELSS Breadboard Project to indicate the capability for plugging in and testing various life support technologies; this name has since been dropped but bioregenerative testing at KSC has continued to the present under the NASA s Advanced Life Support (ALS) Program. A primary objective of the KSC testing was to conduct pre-integration tests with plants (crops) in a large, atmospherically closed test chamber called the Biomass Production Chamber (BPC). Test protocols for the BPC were based on observations and growing procedures developed by university investigators, as well as procedures developed in plant growth chamber studies at KSC. Growth chamber studies to support BPC testing focused on plant responses to different carbon dioxide (CO2) concentrations, different spectral qualities from various electric lamps, and nutrient film hydroponic culture techniques.

  13. Experiences with Lab-on-a-chip Technology in Support of NASA Supported Research

    Science.gov (United States)

    Monaco, Lisa

    2003-01-01

    Under the auspices of the Microgravity Sciences and Application Department at Marshall Space Flight Center, we have custom designed and fabricated a lab-on-a-chip (LOC) device, along with Caliper Technologies, for macromolecular crystal growth. The chip has been designed to deliver specified proportions of up-to five various constituents to one of two growth wells (on-chip) for crystal growth. To date, we have grown crystals of thaumatin, glucose isomerase and appoferitin on the chip. The LOC approach offered many advantages that rendered it highly suitable for space based hardware to perform crystal growth on the International Space Station. The same hardware that was utilized for the crystal growth investigations, has also been used by researchers at Glenn Research Center to investigate aspects of microfluidic phenomenon associated with two-phase flow. Additionally, our LOCAD (Lab-on-a-chip Application Development) team has lent its support to Johnson Space Center s Modular Assay for Solar System Exploration project. At present, the LOCAD team is working on the design and build of a unique lab-on-a-chip breadboard control unit whose function is not commercially available. The breadboard can be used as a test bed for the development of chip size labs for environmental monitoring, crew health monitoring assays, extended flight pharmacological preparations, and many more areas. This unique control unit will be configured for local use and/or remote operation, via the Internet, by other NASA centers. The lab-on-a-chip control unit is being developed with the primary goal of meeting Agency level strategic goals.

  14. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    activities. The second is to direct student use of ICT in terms of making systems available and teaching academic computing. The third challenge is to supervise and conduct project work online and in blended learning environments. Finally, one must find a way to exploit the potentials of ICT in problem...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...

  15. A Review of User-Centered Design for Diabetes-Related Consumer Health Informatics Technologies

    Science.gov (United States)

    LeRouge, Cynthia; Wickramasinghe, Nilmini

    2013-01-01

    User-centered design (UCD) is well recognized as an effective human factor engineering strategy for designing ease of use in the total customer experience with products and information technology that has been applied specifically to health care information technology systems. We conducted a literature review to analyze the current research regarding the use of UCD methods and principles to support the development or evaluation of diabetes-related consumer health informatics technology (CHIT) initiatives. Findings indicate that (1) UCD activities have been applied across the technology development life cycle stages, (2) there are benefits to incorporating UCD to better inform CHIT development in this area, and (3) the degree of adoption of the UCD process is quite uneven across diabetes CHIT studies. In addition, few to no studies report on methods used across all phases of the life cycle with process detail. To address that void, the Appendix provides an illustrative case study example of UCD techniques across development stages. PMID:23911188

  16. Intelligent decision technology support in practice

    CERN Document Server

    Neves-Silva, Rui; Jain, Lakhmi; Phillips-Wren, Gloria; Watada, Junzo; Howlett, Robert

    2016-01-01

    This book contains a collection of innovative chapters emanating from topics raised during the 5th KES International Conference on Intelligent Decision Technologies (IDT), held during 2013 at Sesimbra, Portugal. The authors were invited to expand their original papers into a plethora of innovative chapters espousing IDT methodologies and applications. This book documents leading-edge contributions, representing advances in Knowledge-Based and Intelligent Information and Engineering System. It acknowledges that researchers recognize that society is familiar with modern Advanced Information Processing and increasingly expect richer IDT systems. Each chapter concentrates on the theory, design, development, implementation, testing or evaluation of IDT techniques or applications.  Anyone that wants to work with IDT or simply process knowledge should consider reading one or more chapters and focus on their technique of choice. Most readers will benefit from reading additional chapters to access alternative techniq...

  17. Supporting Postsecondary English Language Learners' Writing Proficiency Using Technological Tools

    Science.gov (United States)

    Moore, Kathleen A.; Rutherford, Camille; Crawford, Keith A.

    2016-01-01

    Postsecondary international students who are also English language learners face a number of challenges when studying abroad and often are provided with services to support their learning. Though some research examines how institutions can support this population of students, few studies explore how technology is used to support language…

  18. Models Support Energy-Saving Microwave Technologies

    Science.gov (United States)

    2012-01-01

    During the Apollo Program, astronauts on the Moon encountered a small menace that created big problems: lunar dust. Similar to how tiny bits of Styrofoam behave on Earth adhering to anything they touch lunar dust sticks to spacesuits, spacecraft, tools, and equipment, and is extremely difficult to remove. The clingy nature of the substance is partly due to its electrostatic charge but is also due to its physical characteristics: The sharp, irregularly shaped grains have edges like burrs and feel like abrasive talcum powder to the touch. Not only a nuisance, Moon dust is also a potential health and safety risk. Because it is often laden with ultraviolet radiation and high iron content, it can be detrimental if it gets into the eyes or lungs. In fact, some of the particles are so small that the human body does not even detect them in order to expel them. On the Apollo missions, equipment covered with the dark-colored Moon dust suffered from the absorption of sunlight and tended to overheat. NASA has investigated tools and techniques to manage the sticky stuff, including magnets, vacuums, and shields. In 2009, Kennedy Space Center collaborated with a small business to investigate a method to harden the Moon's surface in a sense, to pave the surface so astronauts and robots could land, drive, and work without disrupting and scattering the material.

  19. Center for Technology for Advanced Scientific Component Software (TASCS)

    Energy Technology Data Exchange (ETDEWEB)

    Damevski, Kostadin [Virginia State Univ., Petersburg, VA (United States)

    2009-03-30

    A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

  20. Access to information: assessment of the use of automated interaction technologies in call centers

    Directory of Open Access Journals (Sweden)

    Fernando de Souza Meirelles

    2011-01-01

    Full Text Available With the purpose of at lowering costs and reendering the demanded information available to users with no access to the internet, service companies have adopted automated interaction technologies in their call centers, which may or may not meet the expectations of users. Based on different areas of knowledge (man-machine interaction, consumer behavior and use of IT 13 propositions are raised and a research is carried out in three parts: focus group, field study with users and interviews with experts. Eleven automated service characteristics which support the explanation for user satisfaction are listed, a preferences model is proposed and evidence in favor or against each of the 13 propositions is brought in. With balance scorecard concepts, a managerial assessment model is proposed for the use of automated call center technology. In future works, the propositions may become verifiable hypotheses through conclusive empirical research.

  1. Calcine Waste Storage at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    Staiger, Merle Daniel; M. C. Swenson

    2005-01-01

    This report documents an inventory of calcined waste produced at the Idaho Nuclear Technology and Engineering Center during the period from December 1963 to May 2000. The report was prepared based on calciner runs, operation of the calcined solids storage facilities, and miscellaneous operational information that establishes the range of chemical compositions of calcined waste stored at Idaho Nuclear Technology and Engineering Center. The report will be used to support obtaining permits for the calcined solids storage facilities, possible treatment of the calcined waste at the Idaho National Engineering and Environmental Laboratory, and to ship the waste to an off-site facility including a geologic repository. The information in this report was compiled from calciner operating data, waste solution analyses and volumes calcined, calciner operating schedules, calcine temperature monitoring records, and facility design of the calcined solids storage facilities. A compact disk copy of this report is provided to facilitate future data manipulations and analysis.

  2. Assessing the Academic Medical Center as a Supportive Learning Community

    Science.gov (United States)

    Gannon, Sam C.

    2011-01-01

    Academic medical centers are well-known for their emphasis on teaching, research and public service; however, like most large, bureaucratic organizations, they oftentimes suffer from an inability to learn as an organization. The role of the research administrator in the academic medical center has grown over time as the profession itself has…

  3. Combined Neutron Center for European Research and Technology

    International Nuclear Information System (INIS)

    Lagniel, Jean-Michel

    2002-01-01

    High-power proton linacs are needed as driver for several applications, namely transmutation of nuclear waste using Accelerator Driven Systems (ADS), spallation neutron sources (ESS in Europe) and other fields of basic and applied research (next generation of radioactive ion beam facilities, neutrino factories, muon colliders, irradiation facilities for material testing...). The possible synergies among these projects will be pointed out and the feasibility study of high-power proton linac used as driver of a multi-user facility (CONCERT) will be presented. There was excellent scientific, technical and economic reasons to study a Combined Neutron Center for European Research and Technology (CONCERT) based on a high-power proton accelerator. Such an installation would serve condensed matter studies by spallation neutron scattering, a technological irradiation tool and R and D facility for an hybrid reactor demonstrator, a radioactive ion beam facility for nuclear physics, R and D developments for a muon/neutrino facility. The installation could therefore constitute a European center of excellence in the field of neutronics where a large number of scientific and technical executives could be trained. The CONCERT Project Team has performed the feasibility study of such a multi-user facility with: - a review of the beam needs for the different applications, - an analyze of their compatibility, - the definition of the scope of a site-independent project, - a selection of the most appropriate options regarding scientific, technical, financial, organizational and administrative aspects, - an estimation of the costs for construction, operation and the needs in manpower. The conceptual design report [17] is sufficiently detailed to minimize contingencies on those parts of the project having a large potential impact in terms of performances, costs or delays. (author)

  4. Integrated plant information technology design support functionality

    International Nuclear Information System (INIS)

    Kim, Yeon Seung; Kim, Dae Jin; Barber, P. W.; Goland, D.

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author)

  5. Integrated plant information technology design support functionality

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P. W.; Goland, D. [Atomic Energy Canada Ltd., (Canada)

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

  6. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-08-01

    This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies Program in the Office of Energy Efficiency and Renewable Energy.

  7. Business of Nuclear Safety Analysis Office, Nuclear Technology Test Center

    International Nuclear Information System (INIS)

    Hayakawa, Masahiko

    1981-01-01

    The Nuclear Technology Test Center established the Nuclear Safety Analysis Office to execute newly the works concerning nuclear safety analysis in addition to the works related to the proving tests of nuclear machinery and equipments. The regulations for the Nuclear Safety Analysis Office concerning its organization, business and others were specially decided, and it started the business formally in August, 1980. It is a most important subject to secure the safety of nuclear facilities in nuclear fuel cycle as the premise of developing atomic energy. In Japan, the strict regulation of safety is executed by the government at each stage of the installation, construction, operation and maintenance of nuclear facilities, based on the responsibility for the security of installers themselves. The Nuclear Safety Analysis Office was established as the special organ to help the safety examination related to the installation of nuclear power stations and others by the government. It improves and puts in order the safety analysis codes required for the cross checking in the safety examination, and carries out safety analysis calculation. It is operated by the cooperation of the Science and Technology Agency and the Agency of Natural Resources and Energy. The purpose of establishment, the operation and the business of the Nuclear Safety Analysis Office, the plan of improving and putting in order of analysis codes, and the state of the similar organs in foreign countries are described. (Kako, I.)

  8. NASA Glenn Research Center Support of the Advanced Stirling Radioisotope Generator Project

    Science.gov (United States)

    Wilson, Scott D.; Wong, Wayne A.

    2015-01-01

    A high-efficiency radioisotope power system was being developed for long-duration NASA space science missions. The U.S. Department of Energy (DOE) managed a flight contract with Lockheed Martin Space Systems Company to build Advanced Stirling Radioisotope Generators (ASRGs), with support from NASA Glenn Research Center. DOE initiated termination of that contract in late 2013, primarily due to budget constraints. Sunpower, Inc., held two parallel contracts to produce Advanced Stirling Convertors (ASCs), one with Lockheed Martin to produce ASC-F flight units, and one with Glenn for the production of ASC-E3 engineering unit "pathfinders" that are built to the flight design. In support of those contracts, Glenn provided testing, materials expertise, Government-furnished equipment, inspection capabilities, and related data products to Lockheed Martin and Sunpower. The technical support included material evaluations, component tests, convertor characterization, and technology transfer. Material evaluations and component tests were performed on various ASC components in order to assess potential life-limiting mechanisms and provide data for reliability models. Convertor level tests were conducted to characterize performance under operating conditions that are representative of various mission conditions. Despite termination of the ASRG flight development contract, NASA continues to recognize the importance of high-efficiency ASC power conversion for Radioisotope Power Systems (RPS) and continues investment in the technology, including the continuation of the ASC-E3 contract. This paper describes key Government support for the ASRG project and future tests to be used to provide data for ongoing reliability assessments.

  9. The National Space Science and Technology Center's Education and Public Outreach Program

    Science.gov (United States)

    Cox, G. N.; Denson, R. L.

    2004-12-01

    The objective of the National Space Science and Technology Center's (NSSTC) Education and Public Outreach program (EPO) is to support K-20 education by coalescing academic, government, and business constituents awareness, implementing best business/education practices, and providing stewardship over funds and programs that promote a symbiotic relationship among these entities, specifically in the area of K-20 Science, Technology, Engineering, and Mathematics (STEM) education. NSSTC EPO Program's long-term objective is to showcase its effective community-based integrated stakeholder model in support of STEM education and to expand its influence across the Southeast region for scaling ultimately across the United States. The Education and Public Outreach program (EPO) is coordinated by a supporting arm of the NSSTC Administrative Council called the EPO Council (EPOC). The EPOC is funded through federal, state, and private grants, donations, and in-kind contributions. It is comprised of representatives of NSSTC Research Centers, both educators and scientists from the Alabama Space Science and Technology Alliance (SSTA) member institutions, the Alabama Space Grant Consortium and the NASA Marshall Space Flight Center's (MSFC) Education Office. Through its affiliation with MSFC and the SSTA - a consortium of Alabama's research universities that comprise the NSSTC, EPO fosters the education and development of the next generation of Alabama scientists and engineers by coordinating activities at the K-20 level in cooperation with the Alabama Department of Education, the Alabama Commission on Higher Education, and Alabama's businesses and industries. The EPO program's primary objective is to be Alabama's premiere organization in uniting academia, government, and private industry by way of providing its support to the State and Federal Departments of Education involved in systemic STEM education reform, workforce development, and innovative uses of technology. The NSSTC EPO

  10. Center for Center for Technology for Advanced Scientific Component Software (TASCS)

    Energy Technology Data Exchange (ETDEWEB)

    Kostadin, Damevski [Virginia State Univ., Petersburg, VA (United States)

    2015-01-25

    A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS)1 tackles these these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.

  11. Update and Expansion of the Center of Automotive Technology Excellence Under the Graduate Automotive Technology Education (GATE) Program at the University of Tennessee, Knoxville

    Energy Technology Data Exchange (ETDEWEB)

    Irick, David

    2012-08-30

    The Graduate Automotive Technology Education (GATE) Center at the University of Tennessee, Knoxville has completed its seventh year of operation under this agreement, its thirteenth year in total. During this period the Center has involved eleven GATE Fellows and three GATE Research Assistants in preparing them to contribute to advanced automotive technologies in the center’s focus area: Advanced Hybrid Propulsion and Control Systems. In addition to the impact that the Center has had on the students and faculty involved, the presence of the center has led to the acquisition of resources that probably would not have been obtained if the GATE Center had not existed. Significant industry interaction such as equipment donations, and support for GATE students has been realized. The value of the total resources brought to the university (including related research contracts) exceeds $2,000,000.

  12. Technology Integration Support Levels for In-Service Teachers

    Science.gov (United States)

    Williams, Mable Evans

    2017-01-01

    In-service teachers across the globe are expected to integrate technology in their respective instructional content area. The purpose of this qualitative study was to explore the perceptions of in-service teachers concerning building-level support for technology integration. Participants in the study were asked to participate in semi-structured…

  13. Technology Support for Self-Organized Learners (Guest Editorial)

    NARCIS (Netherlands)

    Kalz, Marco; Koper, Rob; Hornung-Prähauser, Veronika

    2010-01-01

    Kalz, M., Koper, R., & Hornung-Prähauser, V. (2009). Technology Support for Self-Organized Learners (Guest Editorial) [Special issue]. In M. Kalz, R. Koper & V. Hornung-Prähauser (Eds.), Journal of Educational Technology & Society, 12(3), 1-3.

  14. Installation of a technological center for highly efficient optical gratings at Helmholtz-Zentrum Berlin (HZB)

    International Nuclear Information System (INIS)

    Loechel, B; Erko, A; Lemke, St; Senf, F; Nelles, B; Schmidt, M

    2013-01-01

    In 2009 Carl Zeiss stopped the manufacture of precision gratings. All users of their gratings were very concerned about this decision, since they all need precision gratings for their experiments. One of the institutes of the HZB, the Institute for Nanometer Optics and Technology (INT), has extensive experience in micro fabrication (technology group). In spring 2010, HZB decided to take over the old C. Zeiss grating fabrication and build up its own technology center for grating fabrication. In March 2010, the INT applied to the Senate of Berlin for funding for our project from the European Regional Development Fund (ERDF). In October 2010, HZB received an approval of its application from the Senate of Berlin (contract No 20072013 2/43). Using this governmental support, HZB will install all necessary equipment and processes to fulfill these demands until end of 2013.

  15. KBTAC: EPRI's center to assist the nuclear industry to apply the knowledge-based technology

    International Nuclear Information System (INIS)

    Lin, Chinglu; Naser, J.A.; Sun, B.K.H.

    1993-01-01

    The nuclear utility industry's complex engineering and procedure systems offer many opportunities for use of the knowledge-based technology such as expert systems and neural networks. The ability of expert systems to enhance human experts makes them an important tool in the areas of engineering, operations and maintenance. However, many current industry applications are research projects or turnkey systems supplied by vendors. These often do not impart to utility technical staff a clear understanding of the capabilities of knowledge-based systems (KBS). More importantly, simply using completed applications does not meet utilities' need to acquire the capabilities to build their own knowledge-based systems. Thus, EPRI is supporting its member utilities utilization of knowledge-based technology for power plant engineering, operations, and maintenance applications through the establishment of the Knowledge-Based Technology Application Center (KBTAC)

  16. Johnson Space Center Research and Technology Annual Report 1998-1999

    Science.gov (United States)

    Abbey, George W. S.

    2004-01-01

    As the principle center for NASA's Human Exploration and Development of Space (HEDS) Enterprise, the Johnson Space Center (JSC) leads NASA development of human spacecraft, human support systems, and human spacecraft operations. An important element in implementing this mission, JSC has focused on developing the infrastructure and partnerships that enable the technology development for future NASA programs. In our efforts to develop key technologies, we have found that collaborative relationships with private industry and academia strengthen our capabilities, infuse innovative ideas, and provide alternative applications for our development projects. The American public has entrusted NASA with the responsibility for space technology development, and JSC is committed to the transfer of the technologies that we develop to the private sector for further development and application. It is our belief that commercialization of NASA technologies benefits both American industry and NASA through technology innovation and continued partnering. To this end, we present the 1998-1999 JSC Research and Technology Report. As your guide to the current JSC technologies, this report showcases the projects in work at JSC that may be of interest to U.S. industry, academia, and other government agencies (federal, state, and local). For each project, potential alternative uses and commercial applications are described. To aid in your search, projects are arranged according to the Major Product Groups used by CorpTech to classify and index types of industry. Some projects fall into multiple categories and are placed under the predominant category, for example, an artificial intelligence project is listed under the Computer Software category, while its function is to automate a process (Automation category).

  17. Activities of JAXA's Innovative Technology Center on Space Debris Observation

    Science.gov (United States)

    Yanagisawa, T.; Kurosaki, H.; Nakajima, A.

    The innovative technology research center of JAXA is developing observational technologies for GEO objects in order to cope with the space debris problem. The center had constructed the optical observational facility for space debris at Mt. Nyukasa, Nagano in 2006. As observational equipments such as CCD cameras and telescopes were set up, the normal observation started. In this paper, the detail of the facilities and its activities are introduced. The observational facility contains two telescopes and two CCD cameras. The apertures of the telescopes are 35cm and 25 cm, respectively. One CCD camera in which 2K2K chip is installed can observe a sky region of 1.3 times 1.3-degree using the 35cm telescope. The other CCD camera that contains two 4K2K chips has an ability to observe 2.6 times 2.6-degree's region with the 25cm telescope. One of our main objectives is to detect faint GEO objects that are not catalogued. Generally, the detection limit of GEO object is determined by the aperture of the telescope. However, by improving image processing techniques, the limit may become low. We are developing some image processing methods that use many CCD frames to detect faint objects. We are trying to use FPGA (Field Programmable Gate Array) system to reduce analyzing time. By applying these methods to the data taken by a large telescope, the detection limit will be significantly lowered. The orbital determination of detected GEO debris is one of the important things to do. Especially, the narrow field view of an optical telescope hinders us from re-detection of the GEO debris for the orbital determination. Long observation time is required for one GEO object for the orbital determination that is inefficient. An effective observation strategy should be considered. We are testing one observation method invented by Umehara that observes one inertia position in the space. By observing one inertia position for two nights, a GEO object that passed through the position in the

  18. FEATURES OF USING AUGMENTED REALITY TECHNOLOGY TO SUPPORT EDUCATIONAL PROCESSES

    Directory of Open Access Journals (Sweden)

    Yury A. Kravchenko

    2014-01-01

    Full Text Available The paper discusses the concept and technology of augmented reality, the rationale given the relevance and timeliness of its use to support educational processes. Paper is a survey and study of the possibility of using augmented reality technology in education. Architecture is proposed and constructed algorithms of the software system management QR-codes media objects. An overview of the features and uses of augmented reality technology to support educational processes is displayed, as an option of a new form of visual demonstration of complex objects, models and processes. 

  19. 78 FR 77662 - Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center...

    Science.gov (United States)

    2013-12-24

    ... (NOA) for General Purpose Warehouse and Information Technology Center Construction (GPW/IT)--Tracy Site.... ACTION: Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center... FR 65300) announcing the publication of the General Purpose Warehouse and Information Technology...

  20. Assistive Technologies for Aged Care: Supportive or Empowering?

    Directory of Open Access Journals (Sweden)

    Suchada Vichitvanichphong

    2014-11-01

    Full Text Available The main objective of this paper is to explore the potentials of assistive technologies to support seniors’ independent living. The work looks at two salient aspects of utilizing technologies for elderly, namely direct support and empowering technologies. The research undertakes a comprehensive analysis of attempts that have been made through investigation of the literature. For this purpose, a realist review of relevant papers published since 2000 has been conducted. The paper concludes that although much research in this area targets the direct support for older adults, the effective use of technologies to maintain seniors’ physical and cognitive abilities requires further investigations. This can provide avenues of opportunities that would empower seniors for their independent living.

  1. Atoms in industry: Radiation technology supports development [Foreword

    International Nuclear Information System (INIS)

    Amano, Yukiya

    2015-01-01

    Cutting-edge industrial technologies underpin the success of strong economies, in developed and developing countries alike. Nuclear science and technology, in particular, can make a major contribution to economic growth and competitiveness, and have an important role to play in support of sustainable development. The IAEA helps to make nuclear science and technology available to enable countries to pursue wider development objectives in areas including human health, agriculture, natural resource management and environmental protection. This edition of the IAEA Bulletin highlights some of the ways in which the technology is being put to effective use in industry.

  2. Pediatric Oncology Branch - Support Services | Center for Cancer Research

    Science.gov (United States)

    Support Services As part of the comprehensive care provided at the NCI Pediatric Oncology Branch, we provide a wide range of services to address the social, psychological, emotional, and practical facets of pediatric cancer and to support patients and families while they are enrolled in clinical research protocols.

  3. Turbine Inflow Characterization at the National Wind Technology Center: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, A.; Schreck, S.; Scott, G.; Kelley, N.; Lundquist, J.

    2012-01-01

    Utility-scale wind turbines operate in dynamic flows that can vary significantly over timescales from less than a second to several years. To better understand the inflow to utility-scale turbines, two inflow towers were installed and commissioned at the National Renewable Energy Laboratory's (NREL) National Wind Technology Center near Boulder, Colorado, in 2011. These towers are 135 m tall and instrumented with a combination of sonic anemometers, cup anemometers, wind vanes, and temperature measurements to characterize the inflow wind speed and direction, turbulence, stability and thermal stratification to two utility-scale turbines. Herein, we present variations in mean and turbulent wind parameters with height, atmospheric stability, and as a function of wind direction that could be important for turbine operation as well as persistence of turbine wakes. Wind speed, turbulence intensity, and dissipation are all factors that affect turbine performance. Our results shown that these all vary with height across the rotor disk, demonstrating the importance of measuring atmospheric conditions that influence wind turbine performance at multiple heights in the rotor disk, rather than relying on extrapolation from lower levels.

  4. External radiation levels in installations of nuclear technology center

    International Nuclear Information System (INIS)

    Maletta, Paulo Guilherme M.; Filipetto, Joao; Wakabayashi, Tetsuaki; Silva, Teogenes A. da

    2005-01-01

    The radiological protection is a basic activity of nuclear technology center so that can carry through its activities with security, having to be planned and executed with total effectiveness. One of the basic tools of the radiological protection is the adoption of monitoring programs, that have as objective generality to evaluate the radiological conditions of the workstation and to assure that these conditions are acceptable safe for the displayed individuals, either workers or members of the public, as established in the basic norms of radiological protection. The Centro de Desenvolvimento da Tecnologia Nuclear - CDTN, first institution in Brazil, created in 1952 to entirely dedicate the related works to the nuclear area, to own 39 building, of which they are kept the Triga Reactor, Irradiation Gamma Laboratory, Reject Laboratory, Calibration Dosemeters Laboratory and others. In such installations, radioactive materials are produced, handled, processed and stored, being necessary the levels of external radiation ambient monitoring. As part of the radioprotection plan, monitoring 63 points on strategically located in the external areas to the building of CDTN, using characterized and calibrated thermoluminescence dosemeters. This work describes the dose distribution of the points, the doses evaluation procedure and the 4 results carried through between 2001 and 2004. The data demonstrate the attendance to the level of security established in the basic norm, what it contributed for the operation licensing of to the IBAMA. (author)

  5. Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

  6. Technology Transfer from University-Based Research Centers: The University of New Mexico Experience.

    Science.gov (United States)

    Rogers, Everett M.; Hall, Brad; Hashimoto, Michio; Steffensen, Morten; Speakman, Kristen L.; Timko, Molly K.

    1999-01-01

    A study of 55 research centers at the University of New Mexico investigated the nature of the typical center, why funding has risen during the 1990s, reasons for founding the centers, the director's role, how university-based research centers transfer technology to private companies and other organizations, and what determines program…

  7. The Assimilation of Assistive Technology in Residential Care Centers for People with Intellectual Disabilities

    Directory of Open Access Journals (Sweden)

    Eli Carmeli

    2004-01-01

    Full Text Available People with intellectual disability (ID require special support in order to achieve independence in their daily life. Persons with ID are less exposed to assistive technology, although studies have shown that the availability of aids afford an opportunity to reach independence and cooperation. The aim of this study was to examine the nature of the relationship between involvement of the physiotherapy (PT team and the degree to which assistive technology was used. A questionnaire was sent to all PTs employed at all 54 residential care centers for persons with ID of the Division for Mental Retardation at the Ministry of Social Affairs in Israel. A significantly positive correlation was found between the degree of involvement of the PT and the utilization of assistive technology. The study results may be summarized by stating that PTs demonstrated a great deal of involvement, particularly in relation to the extent of their work in the residential care centers. PT's awareness of the importance was indicated as the major reason to use assistive technology.

  8. Toward patient-centered, personalized and personal decision support and knowledge management: a survey.

    Science.gov (United States)

    Leong, T-Y

    2012-01-01

    This paper summarizes the recent trends and highlights the challenges and opportunities in decision support and knowledge management for patient-centered, personalized, and personal health care. The discussions are based on a broad survey of related references, focusing on the most recent publications. Major advances are examined in the areas of i) shared decision making paradigms, ii) continuity of care infrastructures and architectures, iii) human factors and system design approaches, iv) knowledge management innovations, and v) practical deployment and change considerations. Many important initiatives, projects, and plans with promising results have been identified. The common themes focus on supporting the individual patients who are playing an increasing central role in their own care decision processes. New collaborative decision making paradigms and information infrastructures are required to ensure effective continuity of care. Human factors and usability are crucial for the successful development and deployment of the relevant systems, tools, and aids. Advances in personalized medicine can be achieved through integrating genomic, phenotypic and other biological, individual, and population level information, and gaining useful insights from building and analyzing biological and other models at multiple levels of abstraction. Therefore, new Information and Communication Technologies and evaluation approaches are needed to effectively manage the scale and complexity of biomedical and health information, and adapt to the changing nature of clinical decision support. Recent research in decision support and knowledge management combines heterogeneous information and personal data to provide cost-effective, calibrated, personalized support in shared decision making at the point of care. Current and emerging efforts concentrate on developing or extending conventional paradigms, techniques, systems, and architectures for the new predictive, preemptive, and

  9. Engineering Technical Support Center Annual Report Fiscal Year 2016

    Science.gov (United States)

    This report highlights significant projects that the ETSC supported in fiscal year 2016. These projects have addressed an array of environmental scenarios, including, but not limited to remote mining contamination, expansive landfill waste, cumulative impacts from multiple contam...

  10. VHA Support Service Center Primary Care Management Module (PCMM)

    Data.gov (United States)

    Department of Veterans Affairs — The Primary Care Management Module (PCMM) was developed to assist VA facilities in implementing Primary Care. PCMM supports both Primary Care and non-Primary Care...

  11. Defense Energy Support Center Fact Book FY 2007

    Science.gov (United States)

    2008-03-21

    Safety Is Priority #1 Product Cylinders/Drums Bulk Helium 1641 121 Argon 788 Hydrazine 219 50 JP-10/PF-1 70 30 Dinitrogen Tetroxide (N204) 29 3 RP-1...US, Belgium, Netherlands, Luxembourg , France, and Germany . The second tier recognizes that a portion of the CEPS supports the delivery of...petroleum products supporting non-NATO activities located in the five CEPS host nations (Belgium, Netherlands, Luxembourg , France and Germany

  12. Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2012-04-01

    The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

  13. Buildings R&D Breakthroughs. Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-04-01

    This report identifies and characterizes commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects sponsored by BTP’s Emerging Technologies subprogram from 2005-2009.

  14. Factors That Contribute to Community Members' Support of Local Nature Centers

    Science.gov (United States)

    Browning, Matthew H. E. M.; Stern, Marc J.; Ardoin, Nicole M.; Heimlich, Joe E.

    2018-01-01

    Nature centers can serve as valuable community institutions if they are seen as providing important services to the community. Through survey research in communities surrounding 16 nature centers in the United States, we examine the attitudes, behaviors, and beliefs that drive hypothetical support for nature centers from local residents.…

  15. Integrated Multi-Team Decision Making Processes and Effectiveness and the Connecticut Center for Advanced Technology

    National Research Council Canada - National Science Library

    Mathieu, John

    2004-01-01

    .... This program established a three part implementation path: First, the Advanced Technology Center will focus on key issues in propulsion and advanced power systems as well as take a leadership role in Next Generation Manufacturing technology...

  16. Program strategy document for the nuclear materials. Transportation Technology Center (FY 80)

    International Nuclear Information System (INIS)

    Jefferson, R.M.

    1980-04-01

    The TTC's program is divided into four principal areas, Technology and Information Center, Systems Development, Technology, and Institutional Issues. These areas are broken into activities, elements, and subelements which are delineated in this document

  17. 75 FR 11936 - Hewlett Packard; Technical Support Call Center; Boise, ID; Notice of Termination of Investigation

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Hewlett Packard; Technical Support Call Center; Boise, ID; Notice of... Packard, Technical Support Call Center, Boise, Idaho. The petitioner has requested that the petition be...

  18. TTI Phase 2 Institutional Support: Center for Study of Science ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    For CSTEP, this project will help enhance its research quality, organizational performance, and policy engagement. Building a strong think tank for India Through this support over the ... -raise the bar for excellence in policy engagement tools and approaches -build a robust system of decision-making structures, systems, ...

  19. Site Characterization and Monitoring Technical Support Center FY16 Report

    Science.gov (United States)

    SCMTSC’s primary goal is to provide technical assistance to regional programs on complex hazardous waste site characterization issues. This annual report illustrates the range and extent of projects that SCMTSC supported in FY 2016. Our principal audiences are site project manage...

  20. Space Life Support Technology Applications to Terrestrial Environmental Problems

    Science.gov (United States)

    Schwartzkopf, Steven H.; Sleeper, Howard L.

    1993-01-01

    Many of the problems now facing the human race on Earth are, in fact, life support issues. Decline of air Quality as a result of industrial and automotive emissions, pollution of ground water by organic pesticides or solvents, and the disposal of solid wastes are all examples of environmental problems that we must solve to sustain human life. The technologies currently under development to solve the problems of supporting human life for advanced space missions are extraordinarily synergistic with these environmental problems. The development of these technologies (including both physicochemical and bioregenerative types) is increasingly focused on closing the life support loop by removing and recycling contaminants and wastes to produce the materials necessary to sustain human life. By so doing, this technology development effort also focuses automatically on reducing resupply logistics requirements and increasing crew safety through increased self-sufficiency. This paper describes several technologies that have been developed to support human life in space and illustrates the applicability of the technologies to environmental problems including environmental remediation and pollution prevention.

  1. Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

    Science.gov (United States)

    Quick, Jason

    2009-01-01

    The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the

  2. Report on Advanced Life Support Activities at Kennedy Space Center

    Science.gov (United States)

    Wheeler, Raymond M.

    2004-01-01

    Plant studies at Kennedy Space Center last year focused on selecting cultivars of lettuce, tomato, and pepper for further testing as crops for near-term space flight applications. Other testing continued with lettuce, onion, and radish plants grown at different combinations of light (PPF), temperature, and CO2 concentration. In addition, comparisons of mixed versus mono culture approaches for vegetable production were studied. Water processing testing focused on the development and testing of a rotating membrane bioreactor to increase oxygen diffusion levels for reducing total organic carbon levels and promoting nitrification. Other testing continued to study composting testing for food wastes (NRA grant) and the use of supplemental green light with red/blue LED lighting systems for plant production (NRC fellowship).

  3. Strategies to facilitate stakeholder and regulator support for technology deployment

    International Nuclear Information System (INIS)

    Burford, T.D.

    1997-01-01

    Implementation and deployment of new and innovative environmental technologies is impossible without regulator, enduser and stakeholder support. Technologies being developed for different needs require different strategies to facilitate this endorsement. Areas addressed will include technologies developed to meet site specific cleanup needs and those developed for multiple site applications. A third area deals with using site specific technologies at previously unidentified locations. In order to expand the application of these technologies to other sites a plan to include potential site regulators and stakeholders early in the development process should be considered. The Subsurface Contaminant Focus Area has developed a Stakeholder Communication Plan. This plan, in addition to lessons learned from current technology development projects that have successfully obtained this type of support, will provide the basis for the information provided in this paper. The object of this paper is to suggest strategies that could facilitate the implementation and deployment of technologies at environmental sites by involving regulators and stakeholders at the proper time for various applications

  4. Education, Technology, and Media: A Peak into My Summer Internship at NASA Glenn Research Center in Cleveland, Ohio

    Science.gov (United States)

    Moon, James

    2004-01-01

    My name is James Moon and I am a senor at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time sohare applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community.

  5. Neighborhood Youth Centers and Families as Supportive Environments for Youth in High Risk Urban Settings

    Directory of Open Access Journals (Sweden)

    Ronald M. Sabatelli

    2009-09-01

    Full Text Available Highlights of a study which examined the relationship between contextual assets within the lives of urban, poor, minority youth, and youth adjustment are discussed in this article. The assets studied were family support and supportive involvement in neighborhood youth centers. The results indicated that higher levels of family support and youth center involvement were associated with better youth outcomes. An absence of significant interaction effects indicated that strong involvement and support in one setting did not compensate for a low level of support or involvement in the other setting. Family support was found to be the most significant predictor of youth adjustment.

  6. Critical Success in E-learning: An Examination of Technological and Institutional Support Factors

    Directory of Open Access Journals (Sweden)

    Maslin Masrom

    2008-12-01

    Full Text Available In recent years, information technology (IT becomes prominent to support teaching and learning activities. IT tools allow us to create, collect, store and use the information and knowledge. E-learning was one of IT tools introduced at College of Science and Technology (CST, University Technology Malaysia (UTM Kuala Lumpur since 2001. It has enabled a paradigm shift from institutio n-centered instruction to anywhere, anytime and anybody learning models. In CST the e-learning technology was used for accessing the syllabus and course content, submitting assignments, and taking class quizzes. This paper focuses on issues relating to the e-learning critical success factors (CSFs from university students’ perspective. In this study, two main factors related to the e-learning CSFs within a university environment included technological and institutional support factors were examined. Confirmatory factor modeling approach was used to assess the criticality of the measures included in each factor. The results indicated that the most critical measures for technological factor in terms of ease of access and infrastructure are the browser efficiency, course website ease of use and computer network reliability. Meanwhile, for institutional support factor, the most critical measure is the availability of technical support or help desk.

  7. 76 FR 2147 - UAW-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW...

    Science.gov (United States)

    2011-01-12

    ...-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW-Chrysler Technical Training Center Technology Training Joint Programs Staff, Warren, MI; Notice of Revised... investigation, the Department confirmed that the proportion of Technology Training Joint Programs Staff...

  8. Validating Fall Prevention Icons to Support Patient-Centered Education.

    Science.gov (United States)

    Leung, Wai Yin; Adelman, Jason; Bates, David W; Businger, Alexandra; Dykes, John S; Ergai, Awatef; Hurley, Ann; Katsulis, Zachary; Khorasani, Sarah; Scanlan, Maureen; Schenkel, Laura; Rai, Amisha; Dykes, Patricia C

    2017-02-22

    Falls with injury are the most prevalent hospital adverse event. The objective of this project was to refine fall risk and prevention icons for a patient-centric bedside toolkit to promote patient and nurse engagement in accurately assessing fall risks and developing a tailored fall prevention plan. Eighty-eight patients and 60 nurses from 2 academic medical centers participated in 4 iterations of testing to refine 6 fall risk and 10 fall prevention icons. During individual interviews, participants rated their satisfaction with the degree to which that icon represented the concept on a 4-point Likert scale, enabling computation of a Content Validity Index (CVI), and provided comments and suggestions for improvement. After reviewing CVI scores and feedback, the research team consulted with the illustrator to revise the icons. Content Validity Index scores improved after icon modifications. Icons that depicted multiple concepts required further iterations to be acceptable. Using icons to depict an accurate and easy-to-interpret fall risk assessment and intervention plan for all care team members including patients and family to follow should lead to improved adherence with that plan and decreased falls. All 16 icons were refined and used to form the basis for a bedside fall prevention toolkit.

  9. Development of Life Support System Technologies for Human Lunar Missions

    Science.gov (United States)

    Barta, Daniel J.; Ewert, Michael K.

    2009-01-01

    With the Preliminary Design Review (PDR) for the Orion Crew Exploration Vehicle planned to be completed in 2009, Exploration Life Support (ELS), a technology development project under the National Aeronautics and Space Administration s (NASA) Exploration Technology Development Program, is focusing its efforts on needs for human lunar missions. The ELS Project s goal is to develop and mature a suite of Environmental Control and Life Support System (ECLSS) technologies for potential use on human spacecraft under development in support of U.S. Space Exploration Policy. ELS technology development is directed at three major vehicle projects within NASA s Constellation Program (CxP): the Orion Crew Exploration Vehicle (CEV), the Altair Lunar Lander and Lunar Surface Systems, including habitats and pressurized rovers. The ELS Project includes four technical elements: Atmosphere Revitalization Systems, Water Recovery Systems, Waste Management Systems and Habitation Engineering, and two cross cutting elements, Systems Integration, Modeling and Analysis, and Validation and Testing. This paper will provide an overview of the ELS Project, connectivity with its customers and an update to content within its technology development portfolio with focus on human lunar missions.

  10. Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

    Science.gov (United States)

    O'Neil, Dara

    2002-01-01

    Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

  11. 76 FR 8371 - Notice Correction; Generic Submission of Technology Transfer Center (TTC) External Customer...

    Science.gov (United States)

    2011-02-14

    ... Submission of Technology Transfer Center (TTC) External Customer Satisfaction Surveys (NCI) The Federal... project titled, ``Technology Transfer Center (TTC) External Customer Satisfaction Survey (NCI)'' was... will include multiple customer satisfaction surveys over the course of three years. At this time, only...

  12. 78 FR 65300 - Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center...

    Science.gov (United States)

    2013-10-31

    ... (NOA) for General Purpose Warehouse and Information Technology Center Construction (GPW/IT)--Tracy Site... proposed action to construct a General Purpose Warehouse and Information Technology Center at Defense..., Suite 02G09, Alexandria, VA 22350- 3100. FOR FURTHER INFORMATION CONTACT: Ann Engelberger at (703) 767...

  13. Internationalization at home : Technology-supported multicultural learning in Peru

    NARCIS (Netherlands)

    Olivos Rossini, L.M.

    2016-01-01

    This research contributes to the disciplines of information systems, management science in particular the field of management education and cross-cultural studies. It further proposes a model to understand technology-supported multicultural learning in Peru. In addition, the model examines

  14. Testimony on Federal Financial Support for Fuels and Energy Technologies

    OpenAIRE

    Terry M. Dinan

    2013-01-01

    Energy-related tax preferences—estimated to total $16.4 billion in 2013—provide much of the support for the development and production of fuels and energy technologies. The Energy Department spends a much smaller amount for such purposes.

  15. Professional learning design framework: supporting technology integration in Alberta

    Directory of Open Access Journals (Sweden)

    Lydia van Thiel

    2018-02-01

    Full Text Available Researchers around the world are interested in knowing how to support teachers in developing both their technology skills and their understanding of how educational technologies can provide opportunity to engage all learners at their skill and interest level in learning activities that were not possible without technology. The solution involves the design and development of teacher professional learning (PL. This study examines a snapshot of one school district, which has experienced a growth in available digital student technology occurring at the same time when teachers experienced a loss of traditional pen and paper resources. Qualitative and quantitative data were gathered and analysed to determine what features of PL would best support teachers in this district. These findings were then considered within the scope of government suggested policy, frameworks and reports. The final suggested framework is for a PL that is collaborative, grade and subject relevant; offers hands-on opportunities; is supported by coaching; is based on research; and is supported by leadership which provides both time and a collaboratively developed vision.

  16. Technology to Support Sign Language for Students with Disabilities

    Science.gov (United States)

    Donne, Vicki

    2013-01-01

    This systematic review of the literature provides a synthesis of research on the use of technology to support sign language. Background research on the use of sign language with students who are deaf/hard of hearing and students with low incidence disabilities, such as autism, intellectual disability, or communication disorders is provided. The…

  17. Peer production & peer support at the Free Technology Academy

    NARCIS (Netherlands)

    Potters, Hanneke; Berlanga, Adriana; Bijlsma, Lex

    2012-01-01

    Potters, H., Berlanga, A. J., & Lex, B. (2011). Peer Production & Peer Support at the Free Technology Academy. In G. van de Veer, P. B. Sloep, & M. van Eekelen (Eds.), Proceedings Computer Science Education Research Conference (CSERC '11) (pp. 49-58). April, 7-8, 2011, Heerlen, The Netherlands: ACM.

  18. Toward Understanding Non-Centralized Technology Support in Higher Education

    Science.gov (United States)

    Jackson, Robert Jonathan

    2009-01-01

    The focus of this research is an examination of service quality provided by non-centralized technology personnel, Local Technical Support Providers (LSPs), at a southern research university. The SERVQUAL instrument was selected to measure service quality of LSPs within the Academic Affairs Division. The rationale for selecting and testing SERVQUAL…

  19. Patient-centered Medical Home Capability and Clinical Performance in HRSA-supported Health Centers

    Science.gov (United States)

    Shi, Leiyu; Lock, Diana C.; Lee, De-Chih; Lebrun-Harris, Lydie A.; Chin, Marshall H.; Chidambaran, Preeta; Nocon, Robert S.; Zhu, Jinsheng; Sripipatana, Alek

    2015-01-01

    Objectives To evaluate the relationship between Patient-centered Medical Home (PCMH) model adoption in health centers (HCs) and clinical performance measures and to determine if adoption of PCMH characteristics is associated with better clinical performance. Research Design Data came from the Health Resources and Services Administration’s 2009 Uniform Data System and the 2009 Commonwealth Fund National Survey of Federally Qualified Health Centers. Clinical performance measures included 2 process measures (childhood immunization and cervical cancer screening) and 2 outcome measures (hypertension control and diabetes control). Total and subscale PCMH scores were regressed on the clinical performance measures, adjusting for patient, provider, financial, and institutional characteristics. Results The findings showed different directional relationships, with some PCMH domains (care management, test/referral tracking, quality improvement, and external coordination) showing little or no effect on outcome measures of interest, 1 domain (access/communication) associated with improved outcomes, and 1 domain (patient tracking/registry) associated with worse outcomes. Conclusions This study is among the first to examine the association between PCMH transformation and clinical performance in HCs, providing an understanding of the impact of PCMH adoption within safety-net settings. The mixed results highlight the importance of examining relationships between specific PCMH domains and specific clinical quality measures, in addition to analyzing overall PCMH scores which could yield distorted findings. PMID:25793267

  20. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program - 2012

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-09-01

    This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  1. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2015

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-01-08

    This FY 2015 report updates the results of an effort to identify and document the commercial and emerging (projected to be commercialized within the next 3 to 5 years) hydrogen and fuel cell technologies and products that resulted from U.S. Department of Energy support through the Fuel Cell Technologies Office in the Office of Energy Efficiency and Renewable Energy.

  2. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2014

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-02-01

    This FY 2014 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  3. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2013

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-04-30

    This FY 2013 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  4. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-09-01

    This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  5. Natick Soldier Systems Center Science and Technology Board (9th)

    Science.gov (United States)

    2012-05-29

    Theresa A. Baus is currently Head of the Technology Partnerships Office ( TPO ) and Head, Office of Research And Technology Applications (ORTA) at the Naval... TPO encompasses all aspects of partnering activities with industry, academia, state and local governments and other federal laboratories. The TPO is...was the Northeast Regional Coordinator for the FLC from 2006 to 2009. Previous to her appointment as Head, TPO , Dr. Baus was the Technology

  6. Engineering, Analysis and Technology FY 1995 Site Support Program Plan

    International Nuclear Information System (INIS)

    Suyama, R.M.

    1994-09-01

    The vision of the Engineering, Analysis and Technology organization is to be recognized as the cost-effective supplier of specialized, integrated, multi-disciplined engineering teams to support Hanford missions. The mission of the Engineering, Analysis and Technology organization is to provide centralized engineering services. These services are focused on supplying technical design, analytical engineering and related support services that support Hanford's environmental restoration mission. These services include engineering analysis, design and development of systems and engineered equipment, supplying multi-disciplined engineering teams to all Hanford programs and project organizations, engineering document release, and site-wide leadership in the development and implementation of engineering standards, engineering practices, and configuration management processes

  7. Supporting sustainable electricity technologies in Greece using MCDM

    Energy Technology Data Exchange (ETDEWEB)

    Doukas, H.; Patlitzianas, K.D.; Psarras, J. [National Technical Univ., Athens (Greece). School of Electrical and Computer Engineering

    2006-06-15

    The penetration of sustainable technologies in electricity generation is low until now in Greece. However, the recent adoption of legislative rules towards the effective operation of liberalized markets, as well as the increased impact of climate change on the electricity sector towards the period 2008-2012, bring out these technologies as key means for establishing conditions of security, stability and environmental protection. The objective of this paper is to put on the map the sustainable technologies for electricity generation in Greece through the formulation of a collective interactive supportive framework, using an existing multi-criteria decision-making (MCDM) method to elaborate more realistic and transparent outcomes. The approach was implemented under the umbrella of the national Foresight Programme, to assist policy making for sustainable electricity generation technologies. [Author].

  8. Scanning diamond NV center probes compatible with conventional AFM technology

    Science.gov (United States)

    Zhou, Tony X.; Stöhr, Rainer J.; Yacoby, Amir

    2017-10-01

    Scanning probe microscopy using nitrogen vacancy (NV) centers in diamond has become a versatile tool with applications in physics, chemistry, life sciences, and earth and planetary sciences. However, the fabrication of diamond scanning probes with high photon collection efficiency, NV centers with long coherence times, and integrated radio frequency (RF) remains challenging due to the small physical dimensions of the probes and the complexity of the fabrication techniques. In this work, we present a simple and robust method to reliably fabricate probes that can be integrated with conventional quartz tuning fork based sensors as well as commercial silicon AFM cantilevers. An integrated RF micro-antenna for NV center spin manipulation is directly fabricated onto the probe making the design versatile and compatible with virtually all AFM instruments. This integration marks a complete sensor package for NV center-based magnetometry and opens up this scanning probe technique to the broader scientific community.

  9. CRADA Payment Options | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    NCI TTC CRADA PAYMENT OPTIONS: Electronic Payments by Wire Transfer via Fedwire, Mail a check to the Institute or Center, or Automated Clearing House (ACH)/Electronic Funds Transfer (ETF) payments via Pay.gov (NCI ONLY).

  10. Impact of configuration management system of computer center on support of scientific projects throughout their lifecycle

    Science.gov (United States)

    Bogdanov, A. V.; Iuzhanin, N. V.; Zolotarev, V. I.; Ezhakova, T. R.

    2017-12-01

    In this article the problem of scientific projects support throughout their lifecycle in the computer center is considered in every aspect of support. Configuration Management system plays a connecting role in processes related to the provision and support of services of a computer center. In view of strong integration of IT infrastructure components with the use of virtualization, control of infrastructure becomes even more critical to the support of research projects, which means higher requirements for the Configuration Management system. For every aspect of research projects support, the influence of the Configuration Management system is being reviewed and development of the corresponding elements of the system is being described in the present paper.

  11. Impact of configuration management system of computer center on support of scientific projects throughout their lifecycle

    International Nuclear Information System (INIS)

    Bogdanov, A.V.; Yuzhanin, N.V.; Zolotarev, V.I.; Ezhakova, T.R.

    2017-01-01

    In this article the problem of scientific projects support throughout their lifecycle in the computer center is considered in every aspect of support. Configuration Management system plays a connecting role in processes related to the provision and support of services of a computer center. In view of strong integration of IT infrastructure components with the use of virtualization, control of infrastructure becomes even more critical to the support of research projects, which means higher requirements for the Configuration Management system. For every aspect of research projects support, the influence of the Configuration Management system is reviewed and development of the corresponding elements of the system is described in the present paper.

  12. A Virtual Geophysical Network: Using Industry Standard Technology to Link Geographically Distributed Sensors and Data Centers

    Science.gov (United States)

    Ahern, T. K.; Benson, R. B.; Crotwell, H. P.

    2003-12-01

    The IRIS Data Management System has long supported distributed data centers as a method of providing scientific researchers access to data from seismological networks around the world. For nearly a decade, the NetDC system used email as the method through which users could access data centers located around the globe in a seamless fashion. More recently the IRIS DMC has partnered with the University of South Carolina to develop a new method through which a virtual data center can be created. The Common Object Request Broker Architecture (CORBA) technology is an industry standard distributed computing architecture. Traditionally used by major corporations, IRIS has developed a Data Handling Interface (DHI) system that is capable of connecting services at participating data centers (servers) to applications running on end-users computing platforms (clients). For seismology we have identified three services. 1) A network service that provides information about geophysical observatories around the world such as where the sensors exist, what types of information are recorded on the sensors, and calibration information that allows proper use of the data, 2) an event service that allows applications to access information about earthquakes and seismological events and 3) waveform services that allow users to gain access to seismograms or time series data from other geophysical sensors. Seismological Data Centers operate the servers thereby allowing a variety of client applications to directly access the information at these data centers. Currently IRIS, the U. of South Carolina, UC Berkeley, and a European Data Center (ORFEUS) have been involved in the DHI project. This talk will highlight some of the DHI enabled clients that allow geophysical information to be directly transferred to the clients. Since the data center servers appear with the same interface specification (Interface Definition Language) a client that can talk to one DHI server can talk to any DHI enabled

  13. The Relationship between Selected Educational Technologies and Student-Centered versus Teacher-Centered Instruction

    Science.gov (United States)

    Kollmer, Michael J.

    2013-01-01

    Not all teachers and students have equal access to technology. This inequality of access creates an uneven instructional practice that may result in varied student learning. By and large, students have limited access to technology within the confines of the classroom. New educational technologies provide schools with an opportunity to broaden and…

  14. Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies

    Energy Technology Data Exchange (ETDEWEB)

    David Holloway

    2005-09-30

    Beginning the fall semester of 1999, The University of Maryland, Departments of Mechanical and Electrical Engineering and the Institute for Systems Research served as a U.S. Department of Energy (USDOE) Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies. A key goal was to produce a graduate level education program that educated and prepared students to address the technical challenges of designing and developing hybrid electric vehicles, as they progressed into the workforce. A second goal was to produce research that fostered the advancement of hybrid electric vehicles, their controls, and other related automotive technologies. Participation ended at the University of Maryland after the 2004 fall semester. Four graduate courses were developed and taught during the course of this time, two of which evolved into annually-taught undergraduate courses, namely Vehicle Dynamics and Control Systems Laboratory. Five faculty members from Mechanical Engineering, Electrical Engineering, and the Institute for Systems Research participated. Four Ph.D. degrees (two directly supported and two indirectly supported) and seven Master's degrees in Mechanical Engineering resulted from the research conducted. Research topics included thermoelectric waste heat recovery, fuel cell modeling, pre- and post-transmission hybrid powertrain control and integration, hybrid transmission design, H{sub 2}-doped combustion, and vehicle dynamics. Many of the participating students accepted positions in the automotive industry or government laboratories involved in automotive technology work after graduation. This report discusses the participating faculty, the courses developed and taught, research conducted, the students directly and indirectly supported, and the publication list. Based on this collection of information, the University of Maryland firmly believes that the key goal of the program was met and that the majority of the

  15. Biomedical foundation supports technology aimed at destroying cancer cells

    OpenAIRE

    Nystrom, Lynn A.

    2008-01-01

    A new technology, using electric pulses to destroy cancer tissue and named by NASA Tech Briefs as one of seven key technological breakthroughs of 2007, is receiving additional support aimed at moving the procedure to the marketplace. One of its lead developers, Rafael V. Davalos, a faculty member of the Virginia Tech-Wake Forest University School of Biomedical Engineering and Sciences (SBES), received a $240,000 grant from the Wallace H. Coulter Foundation and $25,000 from the Wake Forest Com...

  16. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    This paper describes a survey of technologies and to what extent they support virtual project based learning. The paper argues that a survey of learning technologies should be related to concrete learning tasks and processes. Problem oriented project pedagogy (POPP) is discussed, and a framework...... for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...... for e-learning. The paper concludes that virtual project based learning may benefit from facilities of all these systems....

  17. A survey of child care centers about breastfeeding support in Adelaide, South Australia.

    Science.gov (United States)

    Javanparast, Sara; Sweet, Linda; Newman, Lareen; McIntyre, Ellen

    2013-05-01

    Australia has high rates of breastfeeding initiation, with a consistent decline over the first year. Furthermore, there is a growing trend of maternal employment and rising numbers of children enrolled in different types of child care services, both of which can have a negative impact on breastfeeding. To provide evidence to better inform implementation of breastfeeding-friendly strategies in child care settings, this study examined breastfeeding policy and practice in child care centers in metropolitan Adelaide. The paper reports on a survey sent to 292 child care centers in metropolitan Adelaide in 2010. The survey collected information on center location and type, number of enrolled children under age 2, and number of breastfed babies. The survey also included questions about breastfeeding facilities and support, breastfeeding policies, staff training, and barriers to and recommendations to enhance breastfeeding support in child care centers. Of the 62 completed returned surveys (21% response rate), 43 centers (69.4%) reported that they currently have children who receive breast milk at the center; however, in most centers, the total number of breastfed children was reported to be between 1 and 4; 76% reported that the center was supportive of exclusive breastfeeding for 6 months; and 80.6% had statements on breastfeeding as part of their food and nutrition policies or guidelines. Furthermore, 64.5% reported there was no formal or informal training for staff on breastfeeding support, but 50% reported that staff members do provide breastfeeding advice to mothers of children in their center. Despite some strategies in place to support breastfeeding, there are no standards on breastfeeding policies, practices, and training in child care settings. Therefore, the extent and scope of such support depend on parental request and the perceptions and attitudes of child care center staff toward breastfeeding.

  18. 7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts

    International Nuclear Information System (INIS)

    2012-01-01

    This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques

  19. Supporting Clinical Cognition: A Human-Centered Approach to a Novel ICU Information Visualization Dashboard.

    Science.gov (United States)

    Faiola, Anthony; Srinivas, Preethi; Duke, Jon

    2015-01-01

    Advances in intensive care unit bedside displays/interfaces and electronic medical record (EMR) technology have not adequately addressed the topic of visual clarity of patient data/information to further reduce cognitive load during clinical decision-making. We responded to these challenges with a human-centered approach to designing and testing a decision-support tool: MIVA 2.0 (Medical Information Visualization Assistant, v.2). Envisioned as an EMR visualization dashboard to support rapid analysis of real-time clinical data-trends, our primary goal originated from a clinical requirement to reduce cognitive overload. In the study, a convenience sample of 12 participants were recruited, in which quantitative and qualitative measures were used to compare MIVA 2.0 with ICU paper medical-charts, using time-on-task, post-test questionnaires, and interviews. Findings demonstrated a significant difference in speed and accuracy with the use of MIVA 2.0. Qualitative outcomes concurred, with participants acknowledging the potential impact of MIVA 2.0 for reducing cognitive load and enabling more accurate and quicker decision-making.

  20. Research Tools and Materials | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Research Tools can be found in TTC's Available Technologies and in scientific publications. They are freely available to non-profits and universities through a Material Transfer Agreement (or other appropriate mechanism), and available via licensing to companies.

  1. Renal Cancer Biomarkers | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's Laboratory of Proteomics and Analytical Technologies is seeking statements of capability or interest from parties interested in collaborative research to further develop, evaluate, or commercialize diagnostic, therapeutic and prognostic cancer biomarkers from clinical specimens.

  2. Information and psychomotor skills knowledge acquisition: A student-customer-centered and computer-supported approach.

    Science.gov (United States)

    Nicholson, Anita; Tobin, Mary

    2006-01-01

    This presentation will discuss coupling commercial and customized computer-supported teaching aids to provide BSN nursing students with a friendly customer-centered self-study approach to psychomotor skill acquisition.

  3. Research and technology programmes supporting waste management in BNFL

    International Nuclear Information System (INIS)

    Fairhall, G.A.; Horner, A.M.

    2000-01-01

    Waste Management is a major activity of BNFL in the UK and at various locations internationally. To support these activities extensive programmes of Research and Technology have been undertaken for many years. This involves practical studies involving active and non-active work at laboratory and pilot plant scale. Extensive use is also made of theoretical and modelling techniques. Current work is aimed at underpinning and improving current operations supporting the design and safety cases of new plant and addressing waste management activities of the future including decommissioning. (authors)

  4. Long span cable supported bridges - present technology and trends

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1998-01-01

    The activity within the field of long-span cable supported bridges has never been larger than at the end of the 20th century. The technology is well advanced to cope with the present challenges but it is also approaching its limits so if the trend towards ever increasing spans continues into the ...... into the next century, further developments are required to ensure that the bridges will be stable, durable and constructible.......The activity within the field of long-span cable supported bridges has never been larger than at the end of the 20th century. The technology is well advanced to cope with the present challenges but it is also approaching its limits so if the trend towards ever increasing spans continues...

  5. KBTAC [Knowledge-Based Technology Application Center] - The EPRI [Electric Power Research Institute]-sponsored knowledge-based technology application center

    International Nuclear Information System (INIS)

    Meyer, W.; Wood, R.M.; Scherer, J.

    1990-01-01

    The Electric Power Research Institute (EPRI) has announced the establishment of the Knowledge-Based Technology Application Center (KBTAC), whose goal is to assist member utilities with expert system technology and applications. The center, established November 7, 1989, is located on the campus of Syracuse University, Syracuse, New York, and will be operated jointly by Kaman Sciences Corporation and the university. The mission of the KBTAC is to assist EPRI member utilities to develop, test, and transfer expert systems into nuclear power plant operations, maintenance, and administration

  6. Knowledge Management Technology for Decision Support: an empirical examination

    Directory of Open Access Journals (Sweden)

    Meliha Handzic

    2001-11-01

    Full Text Available This paper reports the results of an empirical examination of the effectiveness of one type of knowledge management technology, namely 'contextual knowledge repository', for supporting individual decision makers in a predictive judgement task context. 31 volunteer subjects participated in the study. The results indicate that a given technology was fairly useful, but insufficient to maximally enhance individual decision making. On one hand, subjects were found to extract more knowledge and make significantly smaller decision errors than their notional naive counterparts. On the other hand, subjects tended to extract less knowledge and make significantly larger decision errors compared to notional optimal counterparts. These findings suggest that individuals could potentially benefit from those knowledge management technologies that would provide additional explicit analytical and procedural knowledge, or those that would facilitate sharing of tacit knowledge through interaction with others. Future research is necessary to address these issues.

  7. Annual report of nuclear technology and education center. April 1, 2002 - March 31, 2003

    International Nuclear Information System (INIS)

    2003-10-01

    This report summarizes the activities of Nuclear Technology and Education Center (NuTEC) in Japan Atomic Energy Research Institute in FY 2002. It includes the domestic educational activities in Tokyo Education Center in Komagome Tokyo for RI and radiation engineers and Tokai Education Center in Tokai for nuclear engineers, and the international training activities for Asia-Pacific region which were planned and administrated by International Technology Transfer Division. The new course so called 'Introductory Course for the Use and the Experiment of Neutron' was started with good appreciation by the participants. All scheduled course plan in Tokyo Education Center and Tokai Education Center was accomplished and the total number of the trainee of both Center was 1,297. The courses for RI and radiation engineers implemented in Tokyo Education Center were closed in this FY and transferred to Tokai Establishment in next FY where the course will be integrated with the ones at Tokai Education Center. The land of Tokyo Education Center will be returned to land-owner by the end of FY 2003 after dismantlement of the facilities. The equipments and instruments used in Tokyo Education Center were transferred to Tokai Education Center after finishing all courses in Tokyo in this FY. The improvement and re-arrangement of the facilities in Tokyo Education Center were proceeded to prepare the courses from Tokyo Education Center. (author)

  8. Appropriate technology of infrastructure like support at the production agricultural of the peasant

    International Nuclear Information System (INIS)

    Salamanca Vargas, L.A.

    2001-01-01

    It refers to the Center of Appropriate Technology - CENTA, like an alternative for the improvement of the conditions of life and the production of the rural families. Since 1972 is described up to 1987, beginning as infrastructure section, routine of reparation of the rural housing and finally CENTA, with the purpose of to generate and to transfer technology of low cost in reparation of the housing. It discusses the reparation concept and the environmental conditions that affect the rural family supported in surveys made by the Planning National Department DNP. The characterization of the environmental reparation is indicated for the formulation of reparation programs. The methodology is carried out for the execution of routine of reparation of the rural housing through demonstrative centers. The results of the participation of the ICA are mentioned in the routine of reparation of the rural housing. It is analyzed the concept of appropriate technology and the principles that govern their development and their adoption. The Projects of the Section Center of appropriate Technology and the main realizations are enunciated carried out until 1987

  9. Earth System Grid Center for Enabling Technologies: Building a Global Infrastructure for Climate Change Research

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ahrens, J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ananthakrishnan, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Bell, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bharathi, S. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Brown, D. [National Center for Atmospheric Reserch, Boulder, CO (United States); Chen, M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chervenak, A. L. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Cinquini, L. [National Aeronautics and Space Administration, Pasadena, CA (United States); Drach, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Foster, I. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Fox, P. [Rensselaer Polytechnic Inst., Troy, NY (United States); Hankin, S. [National Oceanic and Atmospheric Administration (PMEL), Seattle, WA (United States); Harper, D. [National Center for Atmospheric Reserch, Boulder, CO (United States); Hook, N. [National Center for Atmospheric Reserch, Boulder, CO (United States); Jones, P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Middleton, D. E. [National Center for Atmospheric Reserch, Boulder, CO (United States); Miller, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nienhouse, E. [National Center for Atmospheric Reserch, Boulder, CO (United States); Schweitzer, R. [National Oceanic and Atmospheric Administration (PMEL), Seattle, WA (United States); Schuler, R. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Shipman, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shoshani, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Siebenlist, F. [Argonne National Lab. (ANL), Argonne, IL (United States); Sim, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Strand, W. G. [National Center for Atmospheric Reserch, Boulder, CO (United States); Wang, F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilcox, H. [National Center for Atmospheric Reserch, Boulder, CO (United States); Wilhelmi, N. [National Center for Atmospheric Reserch, Boulder, CO (United States)

    2010-08-16

    Established within DOE’s Scientific Discovery through Advanced Computing (SciDAC-) 2 program, with support from ASCR and BER, the Earth System Grid Center for Enabling Technologies (ESG-CET) is a consortium of seven laboratories (Argonne National Laboratory [ANL], Los Alamos National Laboratory [LANL], Lawrence Berkeley National Laboratory [LBNL], Lawrence Livermore National Laboratory [LLNL], National Center for Atmospheric Research [NCAR], Oak Ridge National Laboratory [ORNL], and Pacific Marine Environmental Laboratory [PMEL]), and two institutes (Rensselaer Polytechnic Institute [RPI] and the University of Southern California, Information Sciences Institute [USC/ISI]). The consortium’s mission is to provide climate researchers worldwide with a science gateway to access data, information, models, analysis tools, and computational capabilities required to evaluate extreme-scale data sets. Its stated goals are to (1) make data more useful to climate researchers by developing collaborative technology that enhances data usability; (2) meet the specific needs that national and international climate projects have for distributed databases, data access, and data movement; (3) provide a universal and secure web-based data access portal for broad-based multi-model data collections; and (4) provide a wide range of climate data-analysis tools and diagnostic methods to international climate centers and U.S. government agencies. To this end, the ESG-CET is working to integrate all highly publicized climate data sets—from climate simulations to observations—using distributed storage management, remote high-performance units, high-bandwidth wide-area networks, and user desktop platforms in a collaborative problem-solving environment.

  10. Risk reduction methodologies and technologies for the Earth Observing System (EOS) Operations Center (EOC)

    Science.gov (United States)

    Hudson, Richard K.; Pingitore, Nelson V.

    1994-01-01

    This paper will discuss proposed Flight Operations methodologies and technologies for the Earth Observing System (EOS) Operations Center (EOC), to reduce risks associated with the operation of complex multi-instrument spacecraft in a multi-spacecraft environment. The EOC goals are to obtain 100 percent science data capture and maintain 100 percent spacecraft health, for each EOS spacecraft. Operations risks to the spacecraft and data loss due to operator command error, mission degradation due to mis-identification of an anomalous trend in component performance or mis-management of resources, and total mission loss due to improper subsystem configuration or mis-identification of an anomalous condition. This paper discusses automation of routine Flight Operations Team (FOT) responsibilities, Expert systems for real-time non-nominal condition decision support, and Telemetry analysis systems for in-depth playback data analysis and trending.

  11. A home-centered ICT architecture for health-enabling technologies.

    Science.gov (United States)

    Song, Bianying; Marschollek, Michael; Wolf, Klaus-Hendrik; Gietzelt, Matthias; Franken, Thomas; Haux, Reinhold

    2010-01-01

    Population ageing needs health-enabling technologies for delivering pervasive health care. Home care plays an import role in pervasive health care. In this paper, we aim to construct a home-centered health information system architecture which can efficiently manage multi sensors, actuators and decision support systems. Open Services Gateway initiative (OSGI) was used for constructing the service oriented architecture. HL 7 Arden Syntax for medical logic module (MLM) was used to describe the medical knowledge; An Arden compiler was used to interpret the MLMs. The Arden compiler was packed in an OSGI bundle. All of the knowledge bases can share the compiler within the OSGI platform. System within the OSGI-based architecture can change their behaviors during runtime. The proposed prototype architecture was deployed in a case study.

  12. Technology requirements to be addressed by the NASA Lewis Research Center Cryogenic Fluid Management Facility program

    Science.gov (United States)

    Aydelott, J. C.; Rudland, R. S.

    1985-01-01

    The NASA Lewis Research Center is responsible for the planning and execution of a scientific program which will provide advance in space cryogenic fluid management technology. A number of future space missions were identified that require or could benefit from this technology. These fluid management technology needs were prioritized and a shuttle attached reuseable test bed, the cryogenic fluid management facility (CFMF), is being designed to provide the experimental data necessary for the technology development effort.

  13. Integrating Technology into Classroom: The Learner-Centered Instructional Design

    Science.gov (United States)

    Sezer, Baris; Karaoglan Yilmaz, Fatma Gizem; Yilmaz, Ramazan

    2013-01-01

    In this study, to present an instructional model by considering the existing models of instructional design (ARCS, ADDIE, ASSURE, Dick and Carey, Seels and Glasgow, Smith and Ragan etc.) with the nature of technology-based education and to reveal analysis, design, development, implementation, evaluation, and to revise levels with lower levels of…

  14. Hypermedia Laboratory, Defense Applied Information Technology Center; Review for 1988

    Science.gov (United States)

    1988-12-01

    technology and the CCL system to produce an Artificial Inteligence driven Hypermedia environment to access heterogenous database systems. The development...8, December 1988 a minicomputer * HYPERTEXT * multiuser dgis artificial inteligence hypermedi Hypermedia for ASCII Hyperext on the VAX is an ASCII...CODES 18. SUBJECT TERMS (Continue on reverse if necessary and identify by block number) FIELD GROUP SUB-GROUP Hypermedia, Artificial Intelligence

  15. NIH Employee Invention Report (EIR) | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    NIH researchers must immediately contact their Laboratory or Branch Chief and inform him or her of a possible invention, and then consult with your NCI TTC Technology Transfer Manager about submitting an Employee Invention Report (EIR) Form. | [google6f4cd5334ac394ab.html

  16. TEC Center: Linking Technology, Education and Cultural Diversity

    Science.gov (United States)

    Hoter, Elaine; Shonfeld, Miri; Asmaa, N. Ganayem

    2012-01-01

    To many people, "Israel" is perceived as a "high-tech" nation, but in the same breath, as a "nation in conflict." So why not apply Israel's technological advantage to battle the multicultural conflict within? In this article, we will review the multicultural segregation in Israel, the traditional attempts to bring…

  17. Mouse Xenograft Model for Mesothelioma | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute is seeking parties interested in collaborative research to co-develop, evaluate, or commercialize a new mouse model for monoclonal antibodies and immunoconjugates that target malignant mesotheliomas. Applications of the technology include models for screening compounds as potential therapeutics for mesothelioma and for studying the pathology of mesothelioma.

  18. Reliability Impacts in Life Support Architecture and Technology Selection

    Science.gov (United States)

    Lange Kevin E.; Anderson, Molly S.

    2012-01-01

    Quantitative assessments of system reliability and equivalent system mass (ESM) were made for different life support architectures based primarily on International Space Station technologies. The analysis was applied to a one-year deep-space mission. System reliability was increased by adding redundancy and spares, which added to the ESM. Results were thus obtained allowing a comparison of the ESM for each architecture at equivalent levels of reliability. Although the analysis contains numerous simplifications and uncertainties, the results suggest that achieving necessary reliabilities for deep-space missions will add substantially to the life support ESM and could influence the optimal degree of life support closure. Approaches for reducing reliability impacts were investigated and are discussed.

  19. The Virtual Learning Commons: Supporting Science Education with Emerging Technologies

    Science.gov (United States)

    Pennington, D. D.; Gandara, A.; Gris, I.

    2012-12-01

    The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of Semantic Web, mash up, and social networking tools that supports knowledge sharing and innovation across scientific disciplines in research and education communities and networks. The explosion of scientific resources (data, models, algorithms, tools, and cyberinfrastructure) challenges the ability of educators to be aware of resources that might be relevant to their classes. Even when aware, it can be difficult to understand enough about those resources to develop classroom materials. Often emerging data and technologies have little documentation, especially about their application. The VLC tackles this challenge by providing mechanisms for individuals and groups of educators to organize Web resources into virtual collections, and engage each other around those collections in order to a) learn about potentially relevant resources that are available; b) design classes that leverage those resources; and c) develop course syllabi. The VLC integrates Semantic Web functionality for structuring distributed information, mash up functionality for retrieving and displaying information, and social media for discussing/rating information. We are working to provide three views of information that support educators in different ways: 1. Innovation Marketplace: supports users as they find others teaching similar courses, where they are located, and who they collaborate with; 2. Conceptual Mapper: supports educators as they organize their thinking about the content of their class and related classes taught by others; 3. Curriculum Designer: supports educators as they generate a syllabus and find Web resources that are relevant. This presentation will discuss the innovation and learning theories that have informed design of the VLC, hypotheses about the use of emerging technologies to support innovation in classrooms, and will include a

  20. Supporting Worldwide Missions with DESC Energy Around the Globe. Defense Energy Support Center Fact Book, Fiscal Year 2005, Twenty-Eighth Edition

    Science.gov (United States)

    2005-01-01

    Lighting Technology Transpired Solar Collectors Solar Swimming Pools Grid Connected Photovoltaics 53 UTILITY PRIVATIZATION SUPPORT Ongoing Actions Contracts Awarded FY 2005 – (Total Value - $266.2M) Fort Eustis, VA – Water/Wastewater Fort Story, VA – Water/Wastewater Fort Monroe, VA – Water/Wastewater Fort Lee, VA – Wastewater Fort Leavenworth, KS – Electrical Natick Army Soldier Systems Center, MA – Electrical Andrews AFB, MD, Water/Wastewater FY 2004 – (Total Value - $488.1M) Fort Knox, KY – Wastewater/Stormwater Fort Monroe, VA -

  1. Concerning Information Support of the Russian Federation Technological Development

    Directory of Open Access Journals (Sweden)

    M. F. Mizintseva

    2017-01-01

    Full Text Available Purpose: the main of the article is to clarify the theoretical and methodological concept of the need for high-quality operational information support for technological development in the Russian Federation on the basis of scientific infocommunications. Methods: the methodical basis of this article is the economic and statistical methods of analysis, regulatory and legal documents in the field of information support of technological development in the Russian Federation, as well as open analytical materials on key aspects of the topic under study. Results: the article substantiates that a scientific journal is the main means of scientific infocommunications. On the example of the "innovation" direction, a comparative analysis of the publication activity of Russian authors (an information search in the VINITI database of the RAS and foreign authors (information search in the Scopus Database was carried out. Conclusions and Relevance: at present, there is an exponential growth in the number of new peer-reviewed scientific journals, which indicates the rapid formation of scientific communities. It is noted that with increasing scales of scientific research and their complication, the role of the scientific information system is growing.  At the same time, information support requires significant development, modernization and development of the foundations for the formation of a barrier-free environment on the basis of scientific infocommunications. To implement the strategy of technological development in the Russian Federation, an actual information support system should be an integral element, the connecting elements of which are scientific infocommunications.  

  2. Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

    Science.gov (United States)

    1999-01-01

    Center Director Roy Bridges (standing, center) poses with members of the Disability Awareness and Action Working Group (DAAWG), which is holding the 1999 Technology Fair Oct. 20-21 at Kennedy Space Center. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

  3. Semi-annual report of Nuclear Technology and Development Center (CDTN) - July to December 1988

    International Nuclear Information System (INIS)

    1989-01-01

    The main activities developed by the several divisions of Nuclear Technology Development Center (CDTN) are described, including areas of reactor tecnologies, fuel cycle, materials and component, nuclear safety and tecnical substructure. (C.G.C.) [pt

  4. National Fuel Cell Technology Evaluation Center (NFCTEC); (NREL) National Renewable Energy Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Jennifer; Sprik, Sam

    2014-03-11

    This presentation gives an overview of the National Fuel Cell Technology Evaluation Center (NFCTEC), describes how NFCTEC benefits the hydrogen and fuel cell community, and introduces a new fuel cell cost/price aggregation project.

  5. The JET technology program in support of ITER

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, P., E-mail: paola.batistoni@jet.efda.org [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Associazione EURATOM ENEA sulla Fusione, Via E. Fermi 45, I-00044 Frascati (Rome) (Italy); Likonen, J. [Association EURATOM-TEKES, VTT, PO Box 1000, 02044 VTT Espoo (Finland); Bekris, N. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Brezinsek, S. [Association EURATOM-Forschungszentrum Jülich, IPP, D-52425 Jülich (Germany); Coad, P. [EURATOM CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Horton, L. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Matthews, G. [EURATOM CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Rubel, M. [Royal Institute of Technology, Association EURATOM-VR, 100 44 Stockholm (Sweden); Sips, G. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Syme, B.; Widdowson, A. [EURATOM CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom)

    2014-10-15

    This paper presents an overview of the current and planned technological activities at JET in support of ITER operation and safety. The scope is very broad and it ranges from analysis of components from the ITER-like Wall (ILW) to determine material erosion and deposition, dust generation and fuel retention to neutronics measurements and analyses. Preliminary results are given of the post-mortem analyses of samples exposed to JET plasmas during the first JET-ILW operation in 2011–2012, and retrieved during the following in-vessel intervention. JET is the only fusion machine capable of producing significant neutron yields, up to nearly 10{sup 19} n/s (14.1 MeV) in DT operations. Recently, the technological potential of a new DT campaign at JET in support of ITER has been explored and the outcome of this assessment is presented. The expected 14 MeV neutron yield, the use of tritium, the preparation and implementation of safety measures will provide a unique occasion to gain experience in several ITER relevant technological areas. A number of projects and experiments to be conducted in conjunction with the DT operation have been identified and they are described in this paper.

  6. CD-ROM technology at the EROS data center

    Science.gov (United States)

    Madigan, Michael E.; Weinheimer, Mary C.

    1993-01-01

    The vast amount of digital spatial data often required by a single user has created a demand for media alternatives to 1/2" magnetic tape. One such medium that has been recently adopted at the U.S. Geological Survey's EROS Data Center is the compact disc (CD). CD's are a versatile, dynamic, and low-cost method for providing a variety of data on a single media device and are compatible with various computer platforms. CD drives are available for personal computers, UNIX workstations, and mainframe systems, either directly connected, or through a network. This medium furnishes a quick method of reproducing and distributing large amounts of data on a single CD. Several data sets are already available on CD's, including collections of historical Landsat multispectral scanner data and biweekly composites of Advanced Very High Resolution Radiometer data for the conterminous United States. The EROS Data Center intends to provide even more data sets on CD's. Plans include specific data sets on a customized disc to fulfill individual requests, and mass production of unique data sets for large-scale distribution. Requests for a single compact disc-read only memory (CD-ROM) containing a large volume of data either for archiving or for one-time distribution can be addressed with a CD-write once (CD-WO) unit. Mass production and large-scale distribution will require CD-ROM replication and mastering.

  7. Scaling Impacts in Life Support Architecture and Technology Selection

    Science.gov (United States)

    Lange, Kevin

    2016-01-01

    For long-duration space missions outside of Earth orbit, reliability considerations will drive higher levels of redundancy and/or on-board spares for life support equipment. Component scaling will be a critical element in minimizing overall launch mass while maintaining an acceptable level of system reliability. Building on an earlier reliability study (AIAA 2012-3491), this paper considers the impact of alternative scaling approaches, including the design of technology assemblies and their individual components to maximum, nominal, survival, or other fractional requirements. The optimal level of life support system closure is evaluated for deep-space missions of varying duration using equivalent system mass (ESM) as the comparative basis. Reliability impacts are included in ESM by estimating the number of component spares required to meet a target system reliability. Common cause failures are included in the analysis. ISS and ISS-derived life support technologies are considered along with selected alternatives. This study focusses on minimizing launch mass, which may be enabling for deep-space missions.

  8. Personalized Integrated Educational System: Technology Functions for the Learner- Centered Paradigm of Education

    Science.gov (United States)

    Reigeluth, Charles M.; Aslan, Sinem; Chen, Zengguan; Dutta, Pratima; Huh, Yeol; Lee, Dabae; Lin, Chun-Yi; Lu, Ya-Huei; Min, Mina; Tan, Verily; Watson, Sunnie Lee; Watson, William R.

    2015-01-01

    The learner-centered paradigm of instruction differs in such fundamental ways from the teacher-centered paradigm that it requires technology to serve very different functions. In 2006, a research team at Indiana University began to work on identifying those functions and published their results in 2008. Subsequently, the team elaborated and…

  9. Technology-Based Biliteracy Centers for the 21st Century Learner

    Science.gov (United States)

    Mercuri, Sandra; Ramos, Laura

    2014-01-01

    The purpose of this reflective article is to present an alternative that incorporates the four language skills in all content areas through technology-based dual-language centers for emergent bilinguals at the elementary level. The authors propose a matrix to plan the centers and include three examples to facilitate language transfer in English…

  10. TUTOR SUPPORT OF TEACHING MATHEMATICS WITH INFORMATION AND COMMUNICATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Kateryna P. Osadcha

    2017-10-01

    Full Text Available The paper describes the tutor activity in the process of mathematics teaching support on the basis of the use of information and communication technologies (ICT. The author has analysed the available Internet resources and mobile applications in mathematics, which are classified according to their functional purposes into groups: systems of mass open courses, platforms for adaptive learning, video channels, mathematical online simulators, online tasks, mathematical games, mathematical portals, online platforms, mathematical sites, mathematical online platforms, mathematical services, mobile applications in mathematics (simulators, games, generators of example, assistant programs, training complexes, calculators. In accordance with the student age categories mathematical information and communication technologies are divided into three groups: for elementary school students, secondary school students and high school students. The basic ICT tools for teaching mathematics are outlined. The algorithm for constructing tutorial classes with their application is presented.

  11. Teaching the originator to make whoopie. [ORNL Engineering Technology Division Word Processing Center

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    A small Word Processing (Whoopie) Center was established in March 1979, as part of the Engineering Technology Division (ETD), Oak Ridge National Laboratory. Reports preparation information revealed many training items for editors and word processors but none for informing the author. The ETD Word Processing Center has begun a series of sessions with each section in ETD to help originators become more familiar with the Center and its equipment. 5 figures.

  12. Waste management of the Nuclear Technology Development Center - CDTN

    International Nuclear Information System (INIS)

    Miaw, S.T.W.; Oliveira Lopes, M.J. de; Tello, C.C.O. de; Silva, E.M.P. da; Guzella, M.F.R.; Reis, L.C.A.; Menezes Cussiol, N.A. de

    1993-01-01

    Liquid and solid wastes of low radiation level are produced at the Nuclear Technology Development Centre (CDTN). Trying to minimise the waste volume and to give proper treatment, the wastes, are segregated at their origin according their radiological, chemistry and physical characteristics. The Radioactive Waste Program was established in 1983 based on CNEN resolution 6/73 and more recently modernized following CNEN Norm NE-6.05. This paper describes all activities involved in CDTN's Program. (B.C.A.). 6 refs, 02 tabs, 01 fig

  13. A User Centered Approach to Developing Emergent Technology Products

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo; McAloone, Timothy Charles; Schlegel, Tanja

    2008-01-01

    Current participatory design methods do not allow designers to gain the insight required to develop products with emerging technologies, that is, products that do not have any precedents in the users’ knowledge base and experience. This poses challenges to the designers, as input from users cannot...... was to identify the main form factor drivers for the design of such a phone. Five possible usage scenarios were identified and five form factors were derived from testing these scenarios, which were subsequently evaluated by potential users, through highly focused feedback sessions. The paper also discusses some...

  14. Vaccines for HIV | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The development of an effective HIV vaccine has been an ongoing area of research. The high variability in HIV-1 virus strains has represented a major challenge in successful development. Ideally, an effective candidate vaccine would provide protection against the majority of clades of HIV. Two major hurdles to overcome are immunodominance and sequence diversity. This vaccine utilizes a strategy for overcoming these two issues by identifying the conserved regions of the virus and exploiting them for use in a targeted therapy. NCI seeks licensees and/or research collaborators to commercialize this technology, which has been validated in macaque models.

  15. User-centered design to improve clinical decision support in primary care.

    Science.gov (United States)

    Brunner, Julian; Chuang, Emmeline; Goldzweig, Caroline; Cain, Cindy L; Sugar, Catherine; Yano, Elizabeth M

    2017-08-01

    A growing literature has demonstrated the ability of user-centered design to make clinical decision support systems more effective and easier to use. However, studies of user-centered design have rarely examined more than a handful of sites at a time, and have frequently neglected the implementation climate and organizational resources that influence clinical decision support. The inclusion of such factors was identified by a systematic review as "the most important improvement that can be made in health IT evaluations." (1) Identify the prevalence of four user-centered design practices at United States Veterans Affairs (VA) primary care clinics and assess the perceived utility of clinical decision support at those clinics; (2) Evaluate the association between those user-centered design practices and the perceived utility of clinical decision support. We analyzed clinic-level survey data collected in 2006-2007 from 170 VA primary care clinics. We examined four user-centered design practices: 1) pilot testing, 2) provider satisfaction assessment, 3) formal usability assessment, and 4) analysis of impact on performance improvement. We used a regression model to evaluate the association between user-centered design practices and the perceived utility of clinical decision support, while accounting for other important factors at those clinics, including implementation climate, available resources, and structural characteristics. We also examined associations separately at community-based clinics and at hospital-based clinics. User-centered design practices for clinical decision support varied across clinics: 74% conducted pilot testing, 62% conducted provider satisfaction assessment, 36% conducted a formal usability assessment, and 79% conducted an analysis of impact on performance improvement. Overall perceived utility of clinical decision support was high, with a mean rating of 4.17 (±.67) out of 5 on a composite measure. "Analysis of impact on performance

  16. Development of a National Center for Hydrogen Technology

    Energy Technology Data Exchange (ETDEWEB)

    Jay C. Almlie; Bruce Wood; Rich Schlupp

    2007-03-01

    In November 2005, the Energy & Environmental Research Center (EERC), ePowerSynergies, Inc. (ePSI), and Resurfice Corporation teamed to develop, produce, and demonstrate the world's first and only fuel cell-powered ice resurfacer. The goals of this project were: {sm_bullet} To educate the public on the readiness, practicality, and safety of fuel cells powered by hydrogen fuel and {sm_bullet} To establish a commercialization pathway in an early-adopter, niche market. The vehicle was developed and produced in a short 3-month span. The vehicle made its world debut at U.S. Senator Byron Dorgan's (D-ND) 2005 Hydrogen Energy Action Summit. Subsequently, the vehicle toured North America appearing at numerous public events and conferences, receiving much attention from international media outlets.

  17. Developing Effluent Analysis Technologies to Support Nonproliferation Initiatives, Arms Control and Nonproliferation Technologies, Third quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, S A; Staehle, G; Alonzo, G M [eds.

    1995-01-01

    This issue provides an overview of the Effluent Research Program of the DOE Office of Research and Development, highlighting a number of representative projects within this program in support of nonproliferation initiatives. Technologies reported include portable instruments for on-site inspections, standoff detectors, fieldable, real-time instruments, field collection techniques, and ultrasensitive laboratory techniques.

  18. Department of Nuclear Equipment 'High Technology Center - HITEC' - Overview

    International Nuclear Information System (INIS)

    Kopec, J.

    2009-01-01

    Full text: The main activities of the Department for Nuclear Equipment High Technology Centre in 2008 were focused on the development of specialized systems using linear accelerators for medical applications, realized within the frame of the Innovative Economy Operational Program: · Calculations, simulations and design of accelerator structures and beam shaping devices · Design of a model of carrying structures · Building stands for carrying out critical component examinations and tests A new evolutionary algorithm has been implemented in a three-dimensional treatment planning system for intensity modulated radiotherapy (IMRT) planning optimization. A design for a multi leaf collimator, second model, was worked out. The Department received an Award for the Polkam TBI therapeutic table in the first edition of the '' Teraz-Polska '' national contest for the best Polish innovative product. Equipment manufactured by the High Technology Centre and especially for total body irradiation techniques was presented for the first time during the Biennial Meeting of the European Society for Therapeutic Radiology and Oncology in Goeteborg, Sweden. The second edition of the School of Medical Accelerator Physics organized in October 2008 was well received by medical physicists and physicians. (author)

  19. The Schwartz Center Rounds: evaluation of an interdisciplinary approach to enhancing patient-centered communication, teamwork, and provider support.

    Science.gov (United States)

    Lown, Beth A; Manning, Colleen F

    2010-06-01

    To assess the impact of Schwartz Center Rounds, an interdisciplinary forum where attendees discuss psychosocial and emotional aspects of patient care. The authors investigated changes in attendees' self-reported behaviors and beliefs about patient care, sense of teamwork, stress, and personal support. In 2006-2007, researchers conducted retrospective surveys of attendees at six sites offering Schwartz Center Rounds ("the Rounds") for > or =3 years and prospective surveys of attendees at 10 new Rounds sites that have held > or =7 Rounds. Most of the retrospective survey respondents indicated that attending Rounds enhanced their likelihood of attending to psychosocial and emotional aspects of care and enhanced their beliefs about the importance of empathy. Respondents reported better teamwork, including heightened appreciation of the roles and contributions of colleagues. There were significant decreases in perceived stress (P teamwork (both: P teamwork, and provider support. The impact on measured outcomes increased with the number of Rounds attended. The Rounds represent an effective strategy for providing support to health care professionals and for enhancing relationships among them and with their patients.

  20. Technology-Supported Art as a "Way to Participation"

    Directory of Open Access Journals (Sweden)

    Molly Bathje MS, OTR/L

    2014-04-01

    Full Text Available Brianna Vitale provided the painting featured on the cover of the Spring 2014 issue of The Open Journal of Occupational Therapy. Brianna completed the painting, titled “Flamingo,” using a mouth joystick (joust to draw the image on her computer and an assistive device to translate her computer artwork into the watercolor painting. At 12 years old, Brianna has been living for the past 9 years with tetraplegia, the result of a spinal cord injury (SCI. Through technology and with the support of family, friends, and health care professionals, Brianna energetically engages in a variety of creative, social, and philanthropic activities.

  1. Prioritization of engineering support requests and advanced technology projects using decision support and industrial engineering models

    Science.gov (United States)

    Tavana, Madjid

    1995-01-01

    The evaluation and prioritization of Engineering Support Requests (ESR's) is a particularly difficult task at the Kennedy Space Center (KSC) -- Shuttle Project Engineering Office. This difficulty is due to the complexities inherent in the evaluation process and the lack of structured information. The evaluation process must consider a multitude of relevant pieces of information concerning Safety, Supportability, O&M Cost Savings, Process Enhancement, Reliability, and Implementation. Various analytical and normative models developed over the past have helped decision makers at KSC utilize large volumes of information in the evaluation of ESR's. The purpose of this project is to build on the existing methodologies and develop a multiple criteria decision support system that captures the decision maker's beliefs through a series of sequential, rational, and analytical processes. The model utilizes the Analytic Hierarchy Process (AHP), subjective probabilities, the entropy concept, and Maximize Agreement Heuristic (MAH) to enhance the decision maker's intuition in evaluating a set of ESR's.

  2. Advanced intelligent computational technologies and decision support systems

    CERN Document Server

    Kountchev, Roumen

    2014-01-01

    This book offers a state of the art collection covering themes related to Advanced Intelligent Computational Technologies and Decision Support Systems which can be applied to fields like healthcare assisting the humans in solving problems. The book brings forward a wealth of ideas, algorithms and case studies in themes like: intelligent predictive diagnosis; intelligent analyzing of medical images; new format for coding of single and sequences of medical images; Medical Decision Support Systems; diagnosis of Down’s syndrome; computational perspectives for electronic fetal monitoring; efficient compression of CT Images; adaptive interpolation and halftoning for medical images; applications of artificial neural networks for real-life problems solving; present and perspectives for Electronic Healthcare Record Systems; adaptive approaches for noise reduction in sequences of CT images etc.

  3. TECHNOLOGY SUPPORTED LEARNING PLATFORM: Moodle Integrated Academic Course

    Directory of Open Access Journals (Sweden)

    Saziye YAMAN

    2010-04-01

    Full Text Available It is substantially accepted that constructivism proposes knowledge as “not a fixed object”; constructed by an individual through her own experiences. As a learning theory, constructivism in education emphasizes collaborative learning, such as authentic challenging projects involving in students, teachers and experts in the learning community. Its goal is to create learning communities that are more closely related to the collaborative practice of the real world as strongly reflected in social constructivist idea. The technologies used in the filed of education will support learning through collaborative practices, using learners’ experiences for “meaning making”. The challenge now is to extend the educational networks so that it offers access to learning resources, online storage and tools for communication and management not just within the limitation of school and time. Through learning platforms, such as Moodle, teachers and administrators may bring hardware, software and supporting services together to enable more effective conditions among teachers and students. In this study, Moodle was used to support the 4th grade pre-service language teachers’ (student teachers one of the academic courses, named as “Field Experience”. The student teachers were expected to prepare graduation theses in the field of English language teaching. Moodle was integrated as a technological learning aid and used as online support throughout a semester course. So, we will discuss how Moodle was integrated as a learning platform, while discussing, the use of Moodle as a “course supporter” process, steps and the sample activities will be presented as well.

  4. Supporting Learner-Centered ICT Integration: The Influence of Collaborative and Needs-Based Professional Development

    Science.gov (United States)

    MacDonald, Ronald

    2009-01-01

    A mixed-method study was carried out to investigate how teacher attitude and professional development influence learner-centered Information Communication Technology (ICT) integration. A questionnaire, interviews and observations were used to gather data in a school district in Nova Scotia, Canada. Teacher data were categorized by grade level,…

  5. Test facilities for radioactive materials transport packages (Transportation Technology Center Inc., Pueblo, Colorado, USA)

    International Nuclear Information System (INIS)

    Conlon, P.C.L.

    2001-01-01

    Transportation Technology Center, Inc. is capable of conducting tests on rail vehicle systems designed for transporting radioactive materials including low level waste debris, transuranic waste, and spent nuclear fuel and high level waste. Services include rail vehicle dynamics modelling, on-track performance testing, full scale structural fatigue testing, rail vehicle impact tests, engineering design and technology consulting, and emergency response training. (author)

  6. Episode-Centered Guidelines for Teacher Belief Change toward Technology Integration

    Science.gov (United States)

    Er, Erkan; Kim, ChanMin

    2017-01-01

    Teachers' episodic memories influence their beliefs. The investigation of episodic memories can help identify the teacher beliefs that limit technology-integration. We propose the Episode-Centered Belief Change (ECBC) model that utilizes teachers' episodic memories for changing beliefs impeding effective technology integration. We also propose…

  7. What's new with nurseries and reforestation projects at the Missoula Technology and Development Center?

    Science.gov (United States)

    Bob Simonson

    2011-01-01

    The USDA Forest Service Missoula Technology and Development Center (MTDC) offers technical expertise, technology transfer, and new equipment development to federal, state, and private forest nurseries. Current and recently completed projects at MTDC include a front and mid-mount tractor evaluation, ATV-pulled mechanical tree planter, greenhouse snow remover, freeze...

  8. What's New With Nurseries and Reforestation Projects at the Missoula Technology and Development Center

    Science.gov (United States)

    Brian Vachowski

    2006-01-01

    The USDA Forest Service Missoula Technology and Development Center (MTDC) offers technical expertise, technology transfer, and new equipment development to Federal, State, and private forest nurseries. Current and recently completed projects at MTDC include a nursery soil moisture meter, remote data collection systems, low cost weather stations, electronic soil...

  9. Crossing the Great Divide: Adoption of New Technologies, Therapeutics and Diagnostics at Academic Medical Centers

    Science.gov (United States)

    DeMonaco, Harold J.; Koski, Greg

    2007-01-01

    The role of new technology in healthcare continues to expand from both the clinical and financial perspectives. Despite the importance of innovation, most academic medical centers do not have a clearly defined process for technology assessment. Recognizing the importance of new drugs, diagnostics and procedures in the care of patients and in the…

  10. Spatial interpretation of NASA's Marshall Space Flight Center Payload Operations Control Center using virtual reality technology

    Science.gov (United States)

    Lindsey, Patricia F.

    1993-01-01

    In its search for higher level computer interfaces and more realistic electronic simulations for measurement and spatial analysis in human factors design, NASA at MSFC is evaluating the functionality of virtual reality (VR) technology. Virtual reality simulation generates a three dimensional environment in which the participant appears to be enveloped. It is a type of interactive simulation in which humans are not only involved, but included. Virtual reality technology is still in the experimental phase, but it appears to be the next logical step after computer aided three-dimensional animation in transferring the viewer from a passive to an active role in experiencing and evaluating an environment. There is great potential for using this new technology when designing environments for more successful interaction, both with the environment and with another participant in a remote location. At the University of North Carolina, a VR simulation of a the planned Sitterson Hall, revealed a flaw in the building's design that had not been observed during examination of the more traditional building plan simulation methods on paper and on computer aided design (CAD) work station. The virtual environment enables multiple participants in remote locations to come together and interact with one another and with the environment. Each participant is capable of seeing herself and the other participants and of interacting with them within the simulated environment.

  11. VACET: Proposed SciDAC2 Visualization and Analytics Center for Enabling Technologies

    International Nuclear Information System (INIS)

    Bethel, W; Johnson, C; Hansen, C; Parker, S; Sanderson, A; Silva, C; Tricoche, X; Pascucci, V; Childs, H; Cohen, J; Duchaineau, M; Laney, D; Lindstrom, P; Ahern, S; Meredith, J; Ostrouchov, G; Joy, K; Hamann, B

    2006-01-01

    This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang',' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies

  12. A Measurement Management Technology for Improving Energy Efficiency in Data Centers and Telecommunication Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Hendrik Hamann, Levente Klein

    2012-06-28

    Data center (DC) electricity use is increasing at an annual rate of over 20% and presents a concern for the Information Technology (IT) industry, governments, and the society. A large fraction of the energy use is consumed by the compressor cooling to maintain the recommended operating conditions for IT equipment. The most common way to improve the DC efficiency is achieved by optimally provisioning the cooling power to match the global heat dissipation in the DC. However, at a more granular level, the large range of heat densities of today's IT equipment makes the task of provisioning cooling power optimized to the level of individual computer room air conditioning (CRAC) units much more challenging. Distributed sensing within a DC enables the development of new strategies to improve energy efficiency, such as hot spot elimination through targeted cooling, matching power consumption at rack level with workload schedule, and minimizing power losses. The scope of Measurement and Management Technologies (MMT) is to develop a software tool and the underlying sensing technology to provide critical decision support and control for DC and telecommunication facilities (TF) operations. A key aspect of MMT technology is integration of modeling tools to understand how changes in one operational parameter affect the overall DC response. It is demonstrated that reduced ordered models for DC can generate, in less than 2 seconds computational time, a three dimensional thermal model in a 50 kft{sup 2} DC. This rapid modeling enables real time visualization of the DC conditions and enables 'what if' scenarios simulations to characterize response to 'disturbances'. One such example is thermal zone modeling that matches the cooling power to the heat generated at a local level by identifying DC zones cooled by a specific CRAC. Turning off a CRAC unit can be simulated to understand how the other CRAC utilization changes and how server temperature responds

  13. Using information technology to support knowledge conversion processes

    Directory of Open Access Journals (Sweden)

    2001-01-01

    Full Text Available One of the main roles of Information Technology in Knowledge Management programs is to accelerate the speed of knowledge transfer and creation. The Knowledge Management tools intend to help the processes of collecting and organizing the knowledge of groups of individuals in order to make this knowledge available in a shared base. Due to the largeness of the concept of knowledge, the software market for Knowledge Management seems to be quite confusing. Technology vendors are developing different implementations of the Knowledge Management concepts in their software products. Because of the variety and quantity of Knowledge Management tools available on the market, a typology may be a valuable aid to organizations that are looking for answers to specific needs. The objective of this article is to present guidelines that help to design such a typology. Knowledge Management solutions such as intranet systems, Electronic Document Management (EDM, groupware, workflow, artificial intelligence-based systems, Business Intelligence (BI, knowledge map systems, innovation support, competitive intelligence tools and knowledge portals are discussed in terms of their potential contributions to the processes of creating, registering and sharing knowledge. A number of Knowledge Management tools (Lotus Notes, Microsoft Exchange, Business Objects, Aris Toolset, File Net, Gingo, Vigipro, Sopheon have been checked. The potential of each category of solutions to support the transfer of tacit and/or explicit knowledge and to facilitate the knowledge conversion spiral in the sense of Nonaka and Takeuchi (1995 is discussed.

  14. Impelementation of Information Technology Service Management at Data And Information System Center of XYZ University

    Directory of Open Access Journals (Sweden)

    Kornelius Irfandhi

    2016-03-01

    Full Text Available Information Technology (IT is increasingly progressing. Nowadays, the success of a business of the organization/company is highly dependent on the IT infrastructure used. Therefore, organizations/companies have to manage their IT service to be optimal to their customers. Looking at this matter and the increasing dynamics of XYZ University, then Data and Information System Center (Pusdatin - an IT provider of XYZ University began implementing IT Service Management (ITSM from 2013 using the latest version of Information Technology Infrastructure Library (ITIL, namely ITIL v3 as a framework for implementing ITSM in its business processes. However, along the way, there are still some problems happen in Pusdatin in order that ITSM can actually support and align with the objectives of XYZ University. Through this paper, the authors want to explain how the implementation of ITSM at Pusdatin, identify the problems related to the implementation of ITSM, and provide the solutions for each problem. The methods used are direct observation to Pusdatin, conductan interview with the Head of Pusdatin and Staff of Pusdatin, and also perform a literature review of books and papers that discuss about ITIL. The result of this research is that ITSM process of Pusdatin generally works quite well but there are still some shortcomings because ITSM is not 100% implemented in all areas.

  15. LIDAR technology developments in support of ESA Earth observation missions

    Science.gov (United States)

    Durand, Yannig; Caron, Jérôme; Hélière, Arnaud; Bézy, Jean-Loup; Meynart, Roland

    2017-11-01

    Critical lidar technology developments have been ongoing at the European Space Agency (ESA) in support of EarthCARE (Earth Clouds, Aerosols, and Radiation Explorer), the 6th Earth Explorer mission, and A-SCOPE (Advanced Space Carbon and Climate Observation of Planet Earth), one of the candidates for the 7th Earth Explorer mission. EarthCARE is embarking an Atmospheric backscatter Lidar (ATLID) while A-SCOPE is based on a Total Column Differential Absorption Lidar. As EarthCARE phase B has just started, the pre-development activities, aiming at validating the technologies used in the flight design and at verifying the overall instrument performance, are almost completed. On the other hand, A-SCOPE pre-phase A has just finished. Therefore technology developments are in progress, addressing critical subsystems or components with the lowest TRL, selected in the proposed instrument concepts. The activities described in this paper span over a broad range, addressing all critical elements of a lidar from the transmitter to the receiver.

  16. Improving coordination of care centers for the elderly through IT support

    DEFF Research Database (Denmark)

    Johansen, Andreas Kaas; Lauridsen, Frederik Vahr Bjarnø; Manea, Vlad

    2015-01-01

    In Denmark, care of elderly people involves numerous and relatively autonomous care providers, including care centers, activity centers, physiotherapists, doctors, and other specialists. However, due to a poor coordination of activities, many elderly experience a lack of continuity of care, missed...... appointments, and general discomfort. In this poster we report on preliminary findings from a project aimed at creating improved IT support for coordination of care for the elderly in a Danish municipality. We propose that in order to successfully support heterogeneous collaboration, our system must address...

  17. NASA Earth Science Mission Control Center Enterprise Emerging Technology Study Study (MCC Technology Study)

    Science.gov (United States)

    Smith, Dan; Horan, Stephen; Royer, Don; Sullivan, Don; Moe, Karen

    2015-01-01

    This paper reports on the results of the study to identify technologies that could have a significant impact on Earth Science mission operations when looking out at the 5-15 year horizon (through 2025). The potential benefits of the new technologies will be discussed, as well as recommendations for early research and development, prototyping, or analysis for these technologies.

  18. Location-based technologies for supporting elderly pedestrian in "getting lost" events.

    Science.gov (United States)

    Pulido Herrera, Edith

    2017-05-01

    Localization-based technologies promise to keep older adults with dementia safe and support them and their caregivers during getting lost events. This paper summarizes mainly technological contributions to support the target group in these events. Moreover, important aspects of the getting lost phenomenon such as its concept and ethical issues are also briefly addressed. Papers were selected from scientific databases and gray literature. Since the topic is still in its infancy, other terms were used to find contributions associated with getting lost e.g. wandering. Trends of applying localization systems were identified as personal locators, perimeter systems and assistance systems. The first system barely considered the older adult's opinion, while assistance systems may involve context awareness to improve the support for both the elderly and the caregiver. Since few studies report multidisciplinary work with a special focus on getting lost, there is not a strong evidence of the real efficiency of localization systems or guidelines to design systems for the target group. Further research about getting lost is required to obtain insights for developing customizable systems. Moreover, considering conditions of the older adult might increase the impact of developments that combine localization technologies and artificial intelligence techniques. Implications for Rehabilitation Whilst there is no cure for dementia such as Alzheimer's, it is feasible to take advantage of technological developments to somewhat diminish its negative impact. For instance, location-based systems may provide information to early diagnose the Alzheimer's disease by assessing navigational impairments of older adults. Assessing the latest supportive technologies and methodologies may provide insights to adopt strategies to properly manage getting lost events. More user-centered designs will provide appropriate assistance to older adults. Namely, customizable systems could assist older adults

  19. Smart home technologies for health and social care support.

    Science.gov (United States)

    Martin, Suzanne; Kelly, Greg; Kernohan, W George; McCreight, Bernadette; Nugent, Christopher

    2008-10-08

    The integration of smart home technology to support health and social care is acquiring an increasing global significance. Provision is framed within the context of a rapidly changing population profile, which is impacting on the number of people requiring health and social care, workforce availability and the funding of healthcare systems. To explore the effectiveness of smart home technologies as an intervention for people with physical disability, cognitive impairment or learning disability, who are living at home, and to consider the impact on the individual's health status and on the financial resources of health care. We searched the following databases for primary studies: (a) the Cochrane Effective Practice and Organisation of Care (EPOC) Group Register, (b) the Cochrane Central Register of Controlled Trials (CENTRAL), (The Cochrane Library, issue 1, 2007), and (c) bibliographic databases, including MEDLINE (1966 to March 2007), EMBASE (1980 to March 2007) and CINAHL (1982 to March 2007). We also searched the Database of Abstracts of Reviews of Effectiveness (DARE). We searched the electronic databases using a strategy developed by the EPOC Trials Search Co-ordinator. We included randomised controlled trials (RCTs), quasi-experimental studies, controlled before and after studies (CBAs) and interrupted time series analyses (ITS). Participants included adults over the age of 18, living in their home in a community setting. Participants with a physical disability, dementia or a learning disability were included. The included interventions were social alarms, electronic assistive devices, telecare social alert platforms, environmental control systems, automated home environments and 'ubiquitous homes'. Outcome measures included any objective measure that records an impact on a participant's quality of life, healthcare professional workload, economic outcomes, costs to healthcare provider or costs to participant. We included measures of service satisfaction

  20. Effects of perceived educational support on usage of an internet nursing reference center.

    Science.gov (United States)

    Marshall, Brenda L; Sabbagh, Lia

    2015-04-01

    The need for evidence-based practice in nursing is well established; however, the efficacy of providing online research resources to nurses delivering care at the bedside has yet to undergo empirical testing. This study evaluated the impact of minimal educational support by a nurse researcher on nurses' usage of a hospital-based online nursing reference center. This randomized, comparison group design feasibility study was conducted at a suburban medical center. Real-time RN usage of an online nursing reference center was collected over 10 months (August to May), with the comparative intervention occurring for seven of the 10 months (September to March). Independent samples t tests and analysis of variance demonstrated that nurses receiving weekly or biweekly visits from an educator had significantly higher usage of the reference center. Nurses who received minimal educational support through weekly and biweekly brief, verbally supportive visits from a nurse researcher were significantly higher users of the online nurse reference center than those receiving in-services only. Copyright 2015, SLACK Incorporated.

  1. Role of Theories in the Design of Web-Based Person-Centered Support: A Critical Analysis

    Directory of Open Access Journals (Sweden)

    Agneta Ranerup

    2014-01-01

    Full Text Available Objective. The aim of this study was to provide a critical understanding of the role of theories and their compatibility with a person-centered approach in the design and evaluation of web-based support for the management of chronic illness. Methods. Exploration of web-based support research projects focusing on four cases: (1 preschool children aged 4–6 with bladder dysfunction and urogenital malformation; (2 young adults aged 16–25 living with mental illness; (3 women with type 1 diabetes who are pregnant or in early motherhood; and (4 women who have undergone surgery for breast cancer. Data comprised interviews with research leaders and documented plans. Analysis was performed by means of a cross-case methodology. Results. The used theories concerned design, learning, health and well-being, or transition. All web support products had been developed using a participatory design (PD. Fundamental to the technology design and evaluation of outcomes were theories focusing on learning and on health and well-being. All theories were compatible with a person-centered approach. However, a notable exception was the relatively collective character of PD and Communities of Practice. Conclusion. Our results illustrate multifaceted ways for theories to be used in the design and evaluation of web-based support.

  2. Supported liquid membranes technologies in metals removal from liquid effluents

    Directory of Open Access Journals (Sweden)

    de Agreda, D.

    2011-04-01

    Full Text Available The generation of liquid effluents containing organic and inorganic residues from industries present a potential hazardousness for environment and human health, being mandatory the elimination of these pollutants from the respective solutions containing them. In order to achieve this goal, several techniques are being used and among them, supported liquid membranes technologies are showing their potential for their application in the removal of metals contained in liquid effluents. Supported liquid membranes are a combination between conventional polymeric membranes and solvent extraction. Several configurations are used: flat-sheet supported liquid membranes, spiral wounds and hollow fiber modules. In order to improve their effectiveness, smart operations have been developed: non-dispersive solvent extraction, non-dispersive solvent extraction with strip phase dispersion and hollow fiber renewal liquid membrane. This paper overviewed some of these supported liquid membranes technologies and their applications to the treatment of metal-bearing liquid effluents.

    La generación, por parte de las industrias, de efluentes líquidos conteniendo sustancias orgánicas e inorgánicas, es un peligro potencial tanto para los humanos como para el medio ambiente, siendo necesaria la eliminación de estos elementos tóxicos de las disoluciones que los contienen. Para conseguir este fin, se están aplicando diversas técnicas y entre ellas las tecnologías de membranas líquidas soportadas, están demostrando sus aptitudes para la eliminación de metales contenidos en efluentes líquidos. Las membranas líquidas soportadas, resultan de la unión de las membranas poliméricas y de la tecnología de extracción líquido-líquido. Este tipo de membranas se pueden utilizar en diversas configuraciones: plana, módulo en fibra hueca y módulo en espiral y para aumentar su efectividad se están desarrollando las llamadas operaciones avanzadas: extracción no

  3. Supporting global health goals with information and communications technology

    Science.gov (United States)

    Boman, Magnus; Kruse, Erik

    2017-01-01

    ABSTRACT The objective of this study is to critically assess the possible roles of information and communications technology (ICT) in supporting global health goals. This is done by considering privilege and connectibility. In short, ICT can contribute by providing health information via four different kinds of access, each with its own history and prospective future. All four are analyzed here, in two perspectives: business-as-usual and disruptive. Health data analytics is difficult since the digital representation of past, current, and future health information is lacking. The flow of analytics that may prove beneficial to the individual and not just meet abstract population-level goals or ambitions is analyzed in detail. Sensemaking is also needed, to meet the minimum requirement of making prospective future services understandable to policymakers. Drivers as well as barriers for areas in which policy decisions have the potential to drive positive developments for meeting the Sustainable Development Goals are identified. PMID:28838300

  4. An Information Technology Tool to Support Negotiating Teams

    Directory of Open Access Journals (Sweden)

    Jose Montanana

    1995-05-01

    Full Text Available This paper discusses computer-supported large-scale negotiation, in particular, negotiation with advisers. It is claimed that better communication within negotiating teams should lead to longer, more productive sessions than the current ones. To this end, an information technology environment should be provided for the negotiation. The paper introduces SHINE, a collaborative software system developed at the University of Chile. This software has many features to allow rich interactions among advisers belonging to the same team, among negotiators and also between a negotiator and his advisers. Emphasis is placed on the design features to enable and ease these interactions. The facilities include WYSIWIS windows, enhanced electronic mail to send and receive text or video messages with several urgency levels, an evaluation procedure and various ways to state comments and ideas. SHINE has been implemented as a prototype on Sun Sparc workstations.

  5. Design of a consumer health record for supporting the patient-centered management of chronic diseases.

    NARCIS (Netherlands)

    de Clerq, P.A.; Hasman, A.; Wolffenbuttel, B.H.R.

    2001-01-01

    : Medinfo 2001;10(Pt 2):1445-9 Related Articles, Books, LinkOut Design of a consumer health record for supporting the patient-centered management of chronic diseases. de Clercq PA, Hasman A, Wolffenbuttel BH. Department of Medical Informatics, University of Maastricht, Maastricht, The Netherlands.

  6. 38 CFR 61.80 - General operation requirements for supportive housing and service centers.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false General operation requirements for supportive housing and service centers. 61.80 Section 61.80 Pensions, Bonuses, and Veterans... assuring safety from fire; (10) All food preparation areas must contain suitable space and equipment to...

  7. Using the Multicultural Family Support Centers and Adjustment among Interethnic and Interracial Families in South Korea

    Science.gov (United States)

    Chung, Grace H.; Yoo, Joan P.

    2013-01-01

    The present study proposes a model of using the Multicultural Family Support Centers and adjustment among foreign brides and their interethnic and interracial families in South Korea based on the narratives of 10 foreign brides married to Korean men and 11 service providers who directly interact with these women and their families. The results…

  8. A Project in Support of Nuclear Technology Cooperation

    International Nuclear Information System (INIS)

    Ko, Young Cheol; Kim, Kyoung Pyo; Yi, Ji Ho

    2007-12-01

    The results and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy information and computer software developed in the advanced countries

  9. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Young Cheol; Kim, Kyoung Pyo; Yi, Ji Ho (and others)

    2007-12-15

    The results and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy information and computer software developed in the advanced countries.

  10. ANALYSIS AND COMPARISON OF EXISTING DECISION SUPPORT TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    V. A. Rybak

    2016-01-01

    Full Text Available The article presents the results of an analytical review and comparison of the most common managerial decision support technologies: the analytic hierarchy method, neural networks, fuzzy set theory, genetic algorithms and neural-fuzzy modeling. The advantages and disadvantages of these approaches are shown. Determine the scope of their application. It is shown that the hierarchy analysis method works well with the full initial information, but due to the need for expert comparison of alternatives and the selection of evaluation criteria has a high proportion of subjectivity. For problems in the conditions of risk and uncertainty prediction seems reasonable use of the theory of fuzzy sets and neural networks. It is also considered technology collective decision applied both in the general election, and the group of experts. It reduces the time for conciliation meetings to reach a consensus by the preliminary analysis of all views submitted for the plane in the form of points. At the same time the consistency of opinion is determined by the distance between them.

  11. Providing Open-Access Know How for Directors of Quantitative and Mathematics Support Centers

    Directory of Open Access Journals (Sweden)

    Michael Schuckers

    2017-01-01

    Full Text Available The purpose of this editorial is to introduce the quantitative literacy community to the newly published A Handbook for Directors of Quantitative and Mathematics Centers. QMaSCs (pronounced “Q-masks” can be broadly defined as centers that have supporting students in quantitative fields of study as part of their mission. Some focus only on calculus or mathematics; others concentrate on numeracy or quantitative literacy, and some do all of that. A QMaSC may be embedded in a mathematics department, or part of a learning commons, or a stand-alone center. There are hundreds of these centers in the U.S. The new handbook, which is the outgrowth of a 2013 NSF-sponsored, national workshop attended by 23 QMaSC directors from all quarters of the U.S., is available open access on the USF Scholar Commons and in hard copy from Amazon.com. This editorial by the handbook’s editors provides background and overview of the 20 detailed chapters on center leadership and management; community interactions; staffing, hiring and training; center assessment; and starting a center; and then a collection of ten case studies from research universities, four-year state colleges, liberal arts colleges, and a community college. The editorial ends by pointing out the need and potential benefits of a professional organization for QMaSC directors.

  12. 75 FR 57520 - NASA Advisory Council; Planetary Science Subcommittee; Supporting Research and Technology Working...

    Science.gov (United States)

    2010-09-21

    ... Science Subcommittee; Supporting Research and Technology Working Group; Meeting AGENCY: National... announces a meeting of the Supporting Research and Technology Working Group of the Planetary Science... INFORMATION CONTACT: Dr. Michael New, Planetary Science Division, National Aeronautics and Space...

  13. A Decision Support System for Managing a Diverse Portfolio of Technology Resources

    Science.gov (United States)

    Smith, J.

    2000-01-01

    This paper describes an automated decision support system designed to facilitate the management of a continuously changing portfolio of technologies as new technologies are deployed and older technologies are decommissioned.

  14. A clinical decision support system for integrating tuberculosis and HIV care in Kenya: a human-centered design approach.

    Science.gov (United States)

    Catalani, Caricia; Green, Eric; Owiti, Philip; Keny, Aggrey; Diero, Lameck; Yeung, Ada; Israelski, Dennis; Biondich, Paul

    2014-01-01

    With the aim of integrating HIV and tuberculosis care in rural Kenya, a team of researchers, clinicians, and technologists used the human-centered design approach to facilitate design, development, and deployment processes of new patient-specific TB clinical decision support system for medical providers. In Kenya, approximately 1.6 million people are living with HIV and have a 20-times higher risk of dying of tuberculosis. Although tuberculosis prevention and treatment medication is widely available, proven to save lives, and prioritized by the World Health Organization, ensuring that it reaches the most vulnerable communities remains challenging. Human-centered design, used in the fields of industrial design and information technology for decades, is an approach to improving the effectiveness and impact of innovations that has been scarcely used in the health field. Using this approach, our team followed a 3-step process, involving mixed methods assessment to (1) understand the situation through the collection and analysis of site observation sessions and key informant interviews; (2) develop a new clinical decision support system through iterative prototyping, end-user engagement, and usability testing; and, (3) implement and evaluate the system across 24 clinics in rural West Kenya. Through the application of this approach, we found that human-centered design facilitated the process of digital innovation in a complex and resource-constrained context.

  15. A clinical decision support system for integrating tuberculosis and HIV care in Kenya: a human-centered design approach.

    Directory of Open Access Journals (Sweden)

    Caricia Catalani

    Full Text Available With the aim of integrating HIV and tuberculosis care in rural Kenya, a team of researchers, clinicians, and technologists used the human-centered design approach to facilitate design, development, and deployment processes of new patient-specific TB clinical decision support system for medical providers. In Kenya, approximately 1.6 million people are living with HIV and have a 20-times higher risk of dying of tuberculosis. Although tuberculosis prevention and treatment medication is widely available, proven to save lives, and prioritized by the World Health Organization, ensuring that it reaches the most vulnerable communities remains challenging. Human-centered design, used in the fields of industrial design and information technology for decades, is an approach to improving the effectiveness and impact of innovations that has been scarcely used in the health field. Using this approach, our team followed a 3-step process, involving mixed methods assessment to (1 understand the situation through the collection and analysis of site observation sessions and key informant interviews; (2 develop a new clinical decision support system through iterative prototyping, end-user engagement, and usability testing; and, (3 implement and evaluate the system across 24 clinics in rural West Kenya. Through the application of this approach, we found that human-centered design facilitated the process of digital innovation in a complex and resource-constrained context.

  16. Communities of practice: pedagogy and internet-based technologies to support educator's continuing technology professional development in higher education

    NARCIS (Netherlands)

    Maurice Schols

    2011-01-01

    Advances in information and communication technologies (ICTs) as well as modern pedagogical perspectives have created new possibilities to facilitate and support learning in higher education (HE). Emerging technologies bring opportunities to reconsider teaching and learning. New ideas and concepts

  17. Application of NASA's Advanced Life Support Technologies in Polar Regions

    Science.gov (United States)

    Bubenheim, David L.

    1997-01-01

    The problems of obtaining adequate pure drinking water and disposing of liquid and solid waste in the U.S Arctic, a region where virtually all water is frozen solid for much of the year, has led to unsanitary solutions. Sanitation and a safe water supply are particularly problems in rural villages. These villages are without running water and use plastic buckets for toilets. The outbreak of diseases is believed to be partially attributable to exposure to human waste and lack of sanitation. Villages with the most frequent outbreaks of disease are those in which running water is difficult to obtain. Waste is emptied into open lagoons, rivers, or onto the sea coast. It does not degrade rapidly and in addition to affecting human health, can be harmful to the fragile ecology of the Arctic and the indigenous wildlife and fish populations. Current practices for waste management and sanitation pose serious human hazards as well as threaten the environment. NASA's unique knowledge of water/wastewater treatment systems for extreme environments, identified in the Congressional Office of Technology Assessment report entitled An Alaskan Challenge: Native Villagt Sanitation, may offer practical solutions addressing the issues of safe drinking water and effective sanitation practices in rural villages. NASA's advanced life support technologies are being combined with Arctic science and engineering knowledge to address the unique needs of the remote communities of Alaska through the Advanced Life Systems for Extreme Environments (ALSEE) project. ALSEE is a collaborative effort involving the NASA, the State of Alaska, the University of Alaska, the North Slope Borough of Alaska, Ilisagvik College in Barrow and the National Science Foundation (NSF). The focus is a major issue in the State of Alaska and other areas of the Circumpolar North; the health and welfare of its people, their lives and the subsistence lifestyle in remote communities, economic opportunity, and care for the

  18. A Project in Support of Nuclear Technology Cooperation

    International Nuclear Information System (INIS)

    Lee, Kyu Jung; Choi, Pyong Hoon; Yi, Ji Ho and others

    2004-12-01

    The result and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-Rom DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Effective management of computer codes for nuclear application and establishment of information exchange mechanism for rapid technical support. - acquisition of nuclear computer codes from NEA Data Bank an registration of new software developed by domestic organization

  19. Development of NPP Monitoring and Operation Support Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Park, Jae Chang; Lee, Yong Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)] (and others)

    2008-04-15

    During the first stage (2001.7.1-2004.6.30), we developed general human factors design guidelines VDU-based workstations, PMAS alarm display design guidelines, PMAS SPADES display design guidelines, and the revision of KHNP HFE guidelines (HF-010), which have been applied to domestic NPP designs. We also supported other KNICS projects by performing RPS COM design reviews, development of RPS COM Style Guide, and a review of CEDMCS cabinet operator module display design. We developed the ADIOS prototype, NPP performance analysis systems for YGN No.1, 2 plants and Kori No. 2 plant, alarm cause tracking systems for Kori No. 2 plant and OPR1000, and signal fault detection and diagnosis methods for deaerators and steam generators. During the second stage(2004.7.1-2008.4.30), we supported other KNICS projects by reviewing RPS COM display designs three times, developing ESF-CCS COM style guides and reviewing ESF-CCS COM display design, reviewing CRCS LOM and PCS MTP display designs, and developing requirements for DCS GUI components. We also developed integrated style guide for I and C cabinet operator module display designs. In cooperative research with KOPEC-AE, we developed basic technologies for advanced HSI design including task analysis methods, an information and control requirements database, display design criteria, a HSI prototype with its evaluation, and methods for human factors engineering verification and validation.

  20. Development of NPP Monitoring and Operation Support Technology

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Park, Jae Chang; Lee, Yong Hee

    2008-04-01

    During the first stage (2001.7.1-2004.6.30), we developed general human factors design guidelines VDU-based workstations, PMAS alarm display design guidelines, PMAS SPADES display design guidelines, and the revision of KHNP HFE guidelines (HF-010), which have been applied to domestic NPP designs. We also supported other KNICS projects by performing RPS COM design reviews, development of RPS COM Style Guide, and a review of CEDMCS cabinet operator module display design. We developed the ADIOS prototype, NPP performance analysis systems for YGN No.1, 2 plants and Kori No. 2 plant, alarm cause tracking systems for Kori No. 2 plant and OPR1000, and signal fault detection and diagnosis methods for deaerators and steam generators. During the second stage(2004.7.1-2008.4.30), we supported other KNICS projects by reviewing RPS COM display designs three times, developing ESF-CCS COM style guides and reviewing ESF-CCS COM display design, reviewing CRCS LOM and PCS MTP display designs, and developing requirements for DCS GUI components. We also developed integrated style guide for I and C cabinet operator module display designs. In cooperative research with KOPEC-AE, we developed basic technologies for advanced HSI design including task analysis methods, an information and control requirements database, display design criteria, a HSI prototype with its evaluation, and methods for human factors engineering verification and validation

  1. The development and technology transfer of software engineering technology at NASA. Johnson Space Center

    Science.gov (United States)

    Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

    1992-01-01

    The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

  2. Role and interest of new technologies in data processing for space control centers

    Science.gov (United States)

    Denier, Jean-Paul; Caspar, Raoul; Borillo, Mario; Soubie, Jean-Luc

    1990-10-01

    The ways in which a multidisplinary approach will improve space control centers is discussed. Electronic documentation, ergonomics of human computer interfaces, natural language, intelligent tutoring systems and artificial intelligence systems are considered and applied in the study of the Hermes flight control center. It is concluded that such technologies are best integrated into a classical operational environment rather than taking a revolutionary approach which would involve a global modification of the system.

  3. A regional technology transfer program. [North Carolina Industrial Applications Center for the Southeast

    Science.gov (United States)

    1979-01-01

    The proliferation of online searching capabilities among its industrial clients, changes in marketing staff and direction, use of Dun and Bradstreet marketing service files, growth of the Annual Service Package program, and services delivered to clients at the NASA funded North Carolina Science and Technology Research Center are described. The library search service was reactivated and enlarged, and a survey was conducted on the NC/STRC Technical Bulletin's effectiveness. Several quotations from clients assess the overall value of the Center's services.

  4. Role of national centers of research and development in nuclear technology transfer

    International Nuclear Information System (INIS)

    Graf, J.-J.; Millies, Pierre.

    1977-01-01

    National Research Centers are shown to play a leading role in nuclear technology transfer, whatever may be the directing scheme of nuclear development in the country envisaged. The first act of the Center consists in training specialists in the various nuclear fields. It must ensure the transfer of technological knowledge towards industry (in metallurgy, mechanics, electronics) and other nuclear auxiliary techniques, together with the transfer towards administration (laws). A simplified scheme of nuclear development strategy based on the French scheme (the French Atomic Energy Commission (CEA) with its subsidiary Companies) is presented that is usable for developing countries [fr

  5. Preferance of computer technology for analytical support of large database of medical information systems

    Directory of Open Access Journals (Sweden)

    Biryukov А.P.

    2013-12-01

    Full Text Available Aim: to study the use of intelligent technologies for analytical support of large databases of medical information systems. Material and methods. We used the techniques of object-oriented software design and database design. Results. Based on expert review of models and algorithms for analysis of clinical and epidemiological data and principles of knowledge representation in large-scale health information systems, data mining schema were implemented in the software package of the register of Research Center n.a. A. I. Burnazyan of Russia. Identified areas for effective implementation of abstract data model of EAV and procedures Data Maning for the design of database of biomedical registers. Conclusions. Using intelligent software platform that supports different sets of APIs and object models for different operations in different software environments, allows you to build and maintain an information system through the procedures of data biomedical processing.

  6. THE INFLUENCE OF TECHNOLOGY ON THE PERFORMANCE OF BRAZILIAN CALL CENTERS

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Gião

    2010-08-01

    Full Text Available Call centers (CCs show an evolution over the course of time. There is an intensive use of technology in CCs, although not always a positive side. The article is based on a survey carried out among the 103 Brazilian companies that have come (falta algum complemento, não conseguimos entender a frase and call center services and seeks to verify the contribution of technology in four distinct dimensions: cost reduction, customer relations, communication channels and monitoring of employees. The theoretical framework is eclectic based on strategic considerations, details of the technical areas of telecommunications and information technology, marketing. It focus particularly in the area of customer relations and especially of various national and international studies that have been developed regarding service and customer satisfaction. The results show that heavy use of technology does not mean a general improvement in performance in all dimensions assessed and some dimensions choices to be made over others

  7. 75 FR 41522 - Hewlett Packard, Technical Support Call Center, Including On-Site Leased Workers From Manpower...

    Science.gov (United States)

    2010-07-16

    ... Employment and Training Administration Hewlett Packard, Technical Support Call Center, Including On-Site... workers of Hewlett Packard, Technical Support Call Center, including on-site leased workers from Manpower... subject firm. The workers are engaged in activities related to technical support services. The company...

  8. Language-based communication strategies that support person-centered communication with persons with dementia.

    Science.gov (United States)

    Savundranayagam, Marie Y; Moore-Nielsen, Kelsey

    2015-10-01

    There are many recommended language-based strategies for effective communication with persons with dementia. What is unknown is whether effective language-based strategies are also person centered. Accordingly, the objective of this study was to examine whether language-based strategies for effective communication with persons with dementia overlapped with the following indicators of person-centered communication: recognition, negotiation, facilitation, and validation. Conversations (N = 46) between staff-resident dyads were audio-recorded during routine care tasks over 12 weeks. Staff utterances were coded twice, using language-based and person-centered categories. There were 21 language-based categories and 4 person-centered categories. There were 5,800 utterances transcribed: 2,409 without indicators, 1,699 coded as language or person centered, and 1,692 overlapping utterances. For recognition, 26% of utterances were greetings, 21% were affirmations, 13% were questions (yes/no and open-ended), and 15% involved rephrasing. Questions (yes/no, choice, and open-ended) comprised 74% of utterances that were coded as negotiation. A similar pattern was observed for utterances coded as facilitation where 51% of utterances coded as facilitation were yes/no questions, open-ended questions, and choice questions. However, 21% of facilitative utterances were affirmations and 13% involved rephrasing. Finally, 89% of utterances coded as validation were affirmations. The findings identify specific language-based strategies that support person-centered communication. However, between 1 and 4, out of a possible 21 language-based strategies, overlapped with at least 10% of utterances coded as each person-centered indicator. This finding suggests that staff need training to use more diverse language strategies that support personhood of residents with dementia.

  9. Solid and liquid radioactive waste management of the Nuclear Technology Development Center (CDTN) - NUCLEBRAS

    International Nuclear Information System (INIS)

    Guzella, M.F.R.; Miaw, S.T.W.; Mourao, R.P.; Prado, M.A.S. do; Reis, L.C.A.; Santos, P.O.; Silva, E.M.P.

    1986-01-01

    Low level liquid and solid wastes are produced in several laboratories of the NUCLEAR TECHNOLOGY DEVELOPMENT CENTER (CDTN)-NUCLEBRAS. In the last years, the intensification of technical activities at the Center has increased the radioactive waste volumes. Therefore, the implementation of a Radioactive Waste Management Program has begun. This Program includes the systematic of activities from the waste collection to the transportation for the final disposal. The liquid and solid waste are collected separately in proper containers and stored for later treatment according to the processes available or under development at the Center. (Author) [pt

  10. Solid and liquid radioactive waste management of the Nuclear Technology Development Center (CDTN)- Nuclebras

    International Nuclear Information System (INIS)

    Guzella, M.F.R.; Mourao, R.P.; Reis, L.C.A.; Silva, E.M.P.; Miaw, S.T.W.; Prado, M.A.S.; Santos, P.O.

    1986-01-01

    Low level liquid and solid wastes are produced in several laboratories of the NUCLEAR TECHNOLOGY DEVELOPMENT CENTER (CDTN) - NUCLEBRAS. In the last years, the intensification of technical activities at the Center has increased the radioactive waste volumes. Therefore, the implementation of a Radioactive Waste Management Program has begun. This Program includes the systematic of activities from the waste collection to the transportation for the final disposal. The liquid and solid waste are collected separately in proper containers and stored for later treatment according to the processes available or under development at the Center. (Author) [pt

  11. Implementation and evaluation of carousel dispensing technology in a university medical center pharmacy.

    Science.gov (United States)

    Temple, Jack; Ludwig, Brad

    2010-05-15

    The implementation of carousel dispensing technology (CDT) at a university medical center pharmacy and the associated changes in drug distribution are described. An evaluation of CDT was conducted in three phases: before implementation, during implementation, and after implementation. The preimplementation phase consisted of data collection and facility planning leading up to the physical installation. The implementation phase included the physical installation, carousel medication assignment, and user training. The postimplementation phase included data collection and analysis. The data collected were used to compare preimplementation and postimplementation time studies, labor requirements, inventory turns, and accuracy rates. The estimated labor savings comparing the preimplementation and postimplementation time studies for automated dispensing cabinet (ADC) refills, first-dose requests, supplemental cart fill, and medication procurement totaled 2.6 full-time equivalents (FTEs). After departmental reorganization, a net reduction of 2.0 technician FTEs was achieved. The average turnaround time for stat medication requests using CDT was 7.19 minutes, and the percentage of doses filled in less than 20 minutes was 95.1%. After implementing CDT, the average accuracy rate for all dispense requests increased from 99.02% to 99.48%. The inventory carrying cost was reduced by $25,059. CDT improved the overall efficiency and accuracy of medication dispensing in a university medical center pharmacy. Workflow efficiencies achieved in ADC refill, first-dose dispensing, supplemental cart fill, and the medication procurement process allowed the department to reduce the amount of technician labor required to support the medication distribution process, as well as reallocate technician labor to other areas in need.

  12. Final Report for "Center for Technology for Advanced Scientific Component Software"

    Energy Technology Data Exchange (ETDEWEB)

    Svetlana Shasharina

    2010-12-01

    The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

  13. Final Report for 'Center for Technology for Advanced Scientific Component Software'

    International Nuclear Information System (INIS)

    Shasharina, Svetlana

    2010-01-01

    The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

  14. Technical Data Management Center: a focal point for meteorological and other environmental transport computing technology

    International Nuclear Information System (INIS)

    McGill, B.; Maskewitz, B.F.; Trubey, D.K.

    1981-01-01

    The Technical Data Management Center, collecting, packaging, analyzing, and distributing information, computer technology and data which includes meteorological and other environmental transport work is located at the Oak Ridge National Laboratory, within the Engineering Physics Division. Major activities include maintaining a collection of computing technology and associated literature citations to provide capabilities for meteorological and environmental work. Details of the activities on behalf of TDMC's sponsoring agency, the US Nuclear Regulatory Commission, are described

  15. Development of a National Center for Hydrogen Technology. A Summary Report of Activities Completed at the National Center for Hydrogen Technology - Year 6

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Michael [Univ. of North Dakota, Grand Forks, ND (United States)

    2012-08-01

    The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology (NCHT) since 2005 under a Cooperative Agreement with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research on hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding for hydrogen-related projects ($24 million for projects in the NCHT, which includes federal and corporate partner development funds) involving more than 85 partners (27 with the NCHT). The NCHT Program's nine activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan that refers to realistic testing of technologies at adequate scale, process intensification, and contaminant control. A number of projects have been completed that range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in Year 6 of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

  16. Application of modern technology for fieldwork support in network operations

    International Nuclear Information System (INIS)

    Eggen, Arnt Ove; Langdal, Bjoern Inge

    2006-04-01

    Demands for rational and efficient operation and management in several business sectors such as power-, oil- and gas industry, telecommunication, water and multi-utility has lead to big changes for personnel in charge of managing the infrastructure and for the field-workers. Contractors providing services for the large power network companies do not have the local knowledge about construction projects, and there are increased demands on efficiency related to completion, documentation and reporting. This implies a need for transmission of knowledge and experiences between office and the field, and support for fieldwork in the form of applications using various technological possibilities. Field solutions that have well-developed technical and organisational properties will make administration of the infrastructure more efficient, and raise the quality of the work. The choice of mobile service will always be a compromise between several different wishes and needs. The properties of hardware, software and communication options will often influence possible choices in the respective fields. As an important step in testing of hardware, software and communication, some prototypes have been developed for Pocket Pc. The prototypes 'Befaring' and 'HelikopterBefaring' have been chosen because they contain many of the elements that are important in a mobile solution. In addition a prototype for internet applications has been developed ('HelikopterBefaringMottak') and a Windows application ('HelikopterBefaringPresentasjon') in order to visualise the received and managed information sent from the mobile units. The technological development both in software, hardware, GPS and mobile telephones is extremely rapid, and the first mobile solutions with Pocket Pc, mobile telephone and GPS in one integrated unit is already on the market (ml)

  17. Status of teaching elementary science for English learners in science, mathematics and technology centered magnet schools

    Science.gov (United States)

    Han, Alyson Kim

    According to the California Commission on Teacher Credentialing (2001), one in three students speaks a language other than English. Additionally, the Commission stated that a student is considered to be an English learner if the second language acquisition is English. In California more than 1.4 million English learners enter school speaking a variety of languages, and this number continues to rise. There is an imminent need to promote instructional strategies that support this group of diverse learners. Although this was not a California study, the results derived from the nationwide participants' responses provided a congruent assessment of the basic need to provide effective science teaching strategies to all English learners. The purpose of this study was to examine the status of elementary science teaching practices used with English learners in kindergarten through fifth grade in public mathematics, science, and technology-centered elementary magnet schools throughout the country. This descriptive research was designed to provide current information and to identify trends in the areas of curriculum and instruction for English learners in science themed magnet schools. This report described the status of elementary (grades K-5) school science instruction for English learners based on the responses of 116 elementary school teachers: 59 grade K-2, and 57 grade 3-5 teachers. Current research-based approaches support incorporating self-directed learning strategy, expository teaching strategy, active listening strategies, questioning strategies, wait time strategy, small group strategy, peer tutoring strategy, large group learning strategy, demonstrations strategy, formal debates strategy, review sessions strategy, mediated conversation strategy, cooperative learning strategy, and theme-based instruction into the curriculum to assist English learners in science education. Science Technology Society (STS) strategy, problem-based learning strategy, discovery learning

  18. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.

    2012-09-28

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify patents related to hydrogen and fuel cells that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents’ current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs that are related to hydrogen and fuel cells.

  19. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.; Brown, Scott A.

    2011-09-29

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). To do this, Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify hydrogen- and fuel-cell-related patents that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of hydrogen- and fuel-cell-related grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs, and within the FCT portfolio.

  20. Supporting Technology at GRC to Mitigate Risk as Stirling Power Conversion Transitions to Flight

    Science.gov (United States)

    Schreiber, Jeffrey G.; Thieme, Lanny G.; Wong, Wayne A.

    2009-01-01

    Stirling power conversion technology has been reaching more advanced levels of maturity during its development for space power applications. The current effort is in support of the Advanced Stirling Radioisotope Generator (ASRG), which is being developed by the U.S. Department of Energy (DOE), Lockheed Martin Space Systems Company (LMSSC), Sunpower Inc., and the NASA Glenn Research Center (GRC). This generator would use two high-efficiency Advanced Stirling Convertors (ASCs) to convert thermal energy from a radioisotope heat source into electricity. Of paramount importance is the reliability of the power system and as a part of this, the Stirling power convertors. GRC has established a supporting technology effort with tasks in the areas of reliability, convertor testing, high-temperature materials, structures, advanced analysis, organics, and permanent magnets. The project utilizes the matrix system at GRC to make use of resident experts in each of the aforementioned fields. Each task is intended to reduce risk and enhance reliability of the convertor as this technology transitions toward flight status. This paper will provide an overview of each task, outline the recent efforts and accomplishments, and show how they mitigate risk and impact the reliability of the ASC s and ultimately, the ASRG.

  1. Supporting clinical practice at the bedside using wireless technology.

    Science.gov (United States)

    Bullard, Michael J; Meurer, David P; Colman, Ian; Holroyd, Brian R; Rowe, Brian H

    2004-11-01

    Despite studies that show improvements in both standards of care and outcomes with the judicious application of clinical practice guidelines (CPGs), their clinical utilization remains low. This randomized controlled trial examined the use of a wirelessly networked mobile computer (MC) by physicians at the bedside with access to an emergency department information system, decision support tools (DSTs), and other software options. Each of ten volunteer emergency physicians was randomized using a matched-pair design to work five shifts in standard fashion (desktop computer [DC] access) and five shifts with a wirelessly networked MC. Work pattern issues and electronic CPG/DST use were compared using end-of-shift satisfaction questionnaires and review of a CPG/DST database. Repeated-measures analysis of variance was used to examine between-shift differences. A total of 100 eight-hour shifts were evaluated; 99% compliance with postshift questionnaires was achieved. Using a seven-point Likert scale (MC values first), MCs were rated as being as fast (5.04 vs. 4.54; p=0.13) and convenient (5.08 vs. 4.14; p=0.07) as DCs. Overall, physicians rated MCs to be less efficient (3.18 vs. 4.30; p=0.02) but encouraged more frequent use of DSTs (4.10 vs. 3.47; p=0.03) without impacting doctor-patient communication (2.78 vs. 2.96; p=0.51). During the study period, physician use of an intranet Web application (eCPG) was more frequent during shifts assigned to the MC when compared with the DC (eCPG uses/shift, 3.6 vs. 2.0; p=0.033). The MC technology permitted physicians to access information at the bedside and increased the use of CPG/DST tools. According to physicians, patients appeared to accept their use of information technology to assist in decision making. Development of improved computer technology may address the major limitation of MC portability.

  2. TTI Phase 2 Institutional Support: Center for the Study of the ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    CSEA plans to establish an independent research agenda in the areas of public financial management, climate change, oil revenue management, governance, international studies, and science and technology. It receives its funding from the Think Tank Initiative (TTI). Support to research institutions. TTI is a multi-funder ...

  3. Perceived Social Support and Stress among Pregnant Women at Health Centers of Iran- Tabriz

    Science.gov (United States)

    Iranzad, Ilnaz; Bani, Soheila; Hasanpour, Shirin; Mohammadalizadeh, Sakineh; Mirghafourvand, Mozhgan

    2014-01-01

    Introduction: Social support is considered the interaction between the person and environment, which reduces stressors, covers the effects of stress and consequently protects individuals from the harmful effects of stressful situations. This study aimed to determine social support in pregnant women and its relationship with the rate of pregnant women's perceived stress at health centers of Tabriz in 2012-13. Methods: This cross-sectional study was carried out on 450 pregnant women selected through cluster sampling. Data collection tools consisted of a demographic questionnaire, interpersonal support evaluation list (ISEL) and perceived stress questionnaire (PSS) that were completed in an interview. The range of obtainable score for social support and perceived stress was 0-90 and 0-30, respectively. Descriptive and analytical statistics including Pearson and Independent t-test were used for analyzing the data. Results: The mean score of social support and perceived stress in pregnant women was 96.6 (14.6), and 11.5 (5.5), respectively .The women with favorable social support had significantly less stress than the women with unfavorable social support. Conclusion: The study finding showed that the rate of social support in highly stressful women is significantly less than low-stress mothers. Therefore, considering adverse effects of the stress on pregnancy outcomes, some strategies should be designed and implemented in order to strengthen and improve the social support for pregnant women so that it can reduce the rate of pregnant women's stress. PMID:25709981

  4. Intelligence and High Intensity Drug Trafficking Areas (HIDTA's): A Critical Evaluation of the HIDTA Investigative Support Center (ISC)

    National Research Council Canada - National Science Library

    Gutierrez, Michael

    2004-01-01

    ...) Investigative Support Center (ISC). Prior to 9/11, the national intelligence apparatus was littered with flaws, including lack of information sharing, interagency conflict, and autonomous operations...

  5. Technological problem in development of an advanced support system for nuclear data evaluation

    International Nuclear Information System (INIS)

    Iwasaki, S.; Sugiyama, K.

    1990-01-01

    We have discussed the important issues of the technologies which are essential to develop the upgraded (high level) support system for the neutron nuclear data evaluation. However, if we focus to systematized knowledge of the evaluators, which is shallow or deep, and intend to build a cooperative problem solving system between user and machine, the system would be in the extension of the presently developed technologies. An experimental system which can be practically used for the evaluation process would be developed within several years. In order to make the system work efficiently, several data bases and management systems should be prepared; the cross section request data base, the data base for experimental cross sections from the EXFOR file, nuclear model/method/code data bases, and model parameter data base. Development of knowledge acquisition mechanism and natural language interface are very interesting themes in the application of the knowledge engineering technology to the data evaluation, but may be future problems. It is expected that present discussion would provide a useful guidance on the project for the practical system using artificial intelligence technology at JAERI nuclear data center. (author)

  6. Emergent mechanical support in the community: improvement with early transplant center referral.

    Science.gov (United States)

    Morris, Rohinton J; Pochettino, Alberto; O'Hara, Marylou; Gardner, Timothy J; Acker, Michael A

    2005-06-01

    Emergent mechanical support for the failing ventricle, with eventual transfer for definitive care, is often required at non-transplant centers. Transfer for definitive care, in terms of bridge to transplant, may require ventricular assist device (VAD) placement at the primary institution or at the transplant center. Review of consecutive single transplant center referrals was conducted to decipher optimal management. From January 1997 to December 2000, 104 patients were transferred to the University of Pennsylvania Heart Failure/Transplant Service. Most were transferred from active cardiac surgical programs, with 56 patients having post-cardiotomy failure at the primary site. A VAD was placed in procedures done at the outside hospital (OSH) in 28 patients, most commonly (60%) an Abiomed device. Of the 76 patients that received a VAD at the transplant center (TxpC), 86% received a TCI or Thoratec device. Biventricular support was required in 34 patients. Overall survival was 57%, with 54 patients bridged to transplantation and 5 patients undergoing recovery. Patients having a VAD placed at the OSH had a 32% (9 of 28) survival, whereas at the TxpC survival was 65% (45 of 76) (p 1-year post-transplant. The most common cause of death was multi-system organ failure (19 of 45), followed by major neurologic event (15 of 45). Infection was the cause of death in only 6 patients. Left ventricular failure can be treated by emergent VAD placement. Overall survival is substantial if these patients are referred to a transplant center with multiple options. In contrast to previous reports, survival rates may be improved by earlier referral, before VAD placement at non-transplant centers and use of a VAD with longer-term capability.

  7. A project in support of nuclear technology cooperation

    International Nuclear Information System (INIS)

    Jung, Ki Jung; Choi, Pyong Hoon; Lee, Ji Ho

    2003-12-01

    Establish strategies of international cooperation in an effort to promote our nation's leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. Based on the construction of INIS database sent by memeber states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing

  8. Technology support in nursing education: clickers in the classroom.

    Science.gov (United States)

    Berry, Janice

    2009-01-01

    Research has shown that the present generation of students has a preference for digital literacy, experiential learning, interactivity, and immediacy; therefore, greater use of technology is being brought into university courses to aid in student involvement. Student Response Systems, called clickers, were incorporated as a teaching methodology to enhance student interaction and learning in a didactic pediatric nursing course. This course was taught over Interactive Television (ITV) with students at a distant site as well as face to face, creating the challenge of whole-class engagement. Clickers were used to actively engage students at both sites simultaneously and give immediate feedback to students regarding understanding of lecture material. Clickers also allowed small-group problem solving of questions. Exam grades and level of participation in case studies were monitored and exam scores and final scores were compared to those of a previous class. Student t-tests demonstrated that one of three course exams and final course grades were significantly higher for the students who used clickers in the classroom. Satisfaction feedback also supported the use of clickers as a tool to engage students and enhance learning outcomes.

  9. The Research Results of Radioactive Waste Management Technology Center Year 1997/1998

    International Nuclear Information System (INIS)

    1998-12-01

    The research results of Radioactive Waste Management Technology Center, National Atomic Energy Agency of Indonesia year 1997/1998 contain paper as form of research results on radioactive waste management related fields. There were included many aspects such as radioactive waste processing, storage, decontamination, decommissioning, safety and environmental aspects. There are 26 papers indexed individually (ID)

  10. Technology Can Help Young Children Succeed. PACER Center ACTion Information Sheets: PHP-c70

    Science.gov (United States)

    PACER Center, 2014

    2014-01-01

    Parents of young children with disabilities are discovering that carefully selected computer software and mobile apps can provide many benefits such as improved self-esteem, a longer attention span, and inclusion among family and other children that help their children succeed at home and in school. PACER's Simon Technology Center (STC) can help…

  11. Calcined Waste Storage at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    M. D. Staiger

    2007-06-01

    This report provides a quantitative inventory and composition (chemical and radioactivity) of calcined waste stored at the Idaho Nuclear Technology and Engineering Center. From December 1963 through May 2000, liquid radioactive wastes generated by spent nuclear fuel reprocessing were converted into a solid, granular form called calcine. This report also contains a description of the calcine storage bins.

  12. The Research Results of Radioactive Waste Management Technology Center Year 1996/1997

    International Nuclear Information System (INIS)

    Budiman, P.; Martono, H.; Las, T.; Lubis, E.; Mulyanto; Wisnubroto, D. S.; Sucipta

    1997-12-01

    The research results of Radioactive Waste Management Technology Center, National Atomic Energy Agency of Indonesia year 1996/1997 contain paper as form of research results on radioactive waste management related fields. There were included many aspects such as radioactive waste processing, storage, decontamination, decommissioning, safety and environmental aspects. There are 24 papers and 12 short communications indexed individually(ID)

  13. The Clean Energy Manufacturing Analysis Center (CEMAC): Providing Analysis and Insights on Clean Technology Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Nicholi S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-28

    The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

  14. Phase Change Permeation Technology for Environmental Control & Life Support Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is evaluating Dutyion™, a phase change permeation membrane technology developed by Design Technology and Irrigation (DTI), for use in future advanced life...

  15. MIT Lincoln Laboratory: Technology in Support of National Security

    Science.gov (United States)

    2011-01-01

    Carter, Cathy Ho, Ngaire Underhill, Sara James, Jessica Olszta, Jessica Brooks, Melissa May, and Rodolfo Cuevas. Because Lincoln Laboratory is at the...Corporation Applicon Arcon Corporation Ascension Technology Atlantic Aerospace Electronics Axsun Technologies Broadcloud Communications Carl Blake

  16. Development of a national center for hydrogen technology. A summary report of activities completed at the national center hydrogen technology from 2005 to 2010

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Michael J. [Univ. of North Dakota, Grand Forks, ND (United States)

    2011-06-01

    The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology® (NCHT®) since 2005 under a Cooperative Agreement with the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research of hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding of hydrogen-related projects ($20 million for the NCHT project which includes federal and corporate development partner funds) involving more than 85 partners (27 with the NCHT). The NCHT project's 19 activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan. A number of projects have been completed which range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified to transportation-grade quality in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in the first 5 years of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

  17. Implementation of Personnel Support Centers in the United States Coast Guard.

    Science.gov (United States)

    1983-06-01

    Development, Goodyear Publishing Co. 1980. Also attributed to David 3. Gleicher in Richard Beckhard and Reuben Harris, Organizational Transitions... Richard D. Irwin, Inc., 1980. 3eckhard, R., Organization Development: Strategies and Models, Addison-Lesley, 19o9. Beckhard , R. and Harris, R.T...MPLEMENTATION OF PERSONNEL SUPPORT CENTERS IN THE UNITED STATES COAST GUARD oy ’hilip Edward Sherer June 1983 Thesis Advisor: Richard A. McGcnigal

  18. National Energy Research Scientific Computing Center (NERSC): Advancing the frontiers of computational science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Hules, J. [ed.

    1996-11-01

    National Energy Research Scientific Computing Center (NERSC) provides researchers with high-performance computing tools to tackle science`s biggest and most challenging problems. Founded in 1974 by DOE/ER, the Controlled Thermonuclear Research Computer Center was the first unclassified supercomputer center and was the model for those that followed. Over the years the center`s name was changed to the National Magnetic Fusion Energy Computer Center and then to NERSC; it was relocated to LBNL. NERSC, one of the largest unclassified scientific computing resources in the world, is the principal provider of general-purpose computing services to DOE/ER programs: Magnetic Fusion Energy, High Energy and Nuclear Physics, Basic Energy Sciences, Health and Environmental Research, and the Office of Computational and Technology Research. NERSC users are a diverse community located throughout US and in several foreign countries. This brochure describes: the NERSC advantage, its computational resources and services, future technologies, scientific resources, and computational science of scale (interdisciplinary research over a decade or longer; examples: combustion in engines, waste management chemistry, global climate change modeling).

  19. Are Key Principles for improved health technology assessment supported and used by health technology assessment organizations?

    Science.gov (United States)

    Neumann, Peter J; Drummond, Michael F; Jönsson, Bengt; Luce, Bryan R; Schwartz, J Sanford; Siebert, Uwe; Sullivan, Sean D

    2010-01-01

    Previously, our group-the International Working Group for HTA Advancement-proposed a set of fifteen Key Principles that could be applied to health technology assessment (HTA) programs in different jurisdictions and across a range of organizations and perspectives. In this commentary, we investigate the extent to which these principles are supported and used by fourteen selected HTA organizations worldwide. We find that some principles are broadly supported: examples include being explicit about HTA goals and scope; considering a wide range of evidence and outcomes; and being unbiased and transparent. Other principles receive less widespread support: examples are addressing issues of generalizability and transferability; being transparent on the link between HTA findings and decision-making processes; considering a full societal perspective; and monitoring the implementation of HTA findings. The analysis also suggests a lack of consensus in the field about some principles--for example, considering a societal perspective. Our study highlights differences in the uptake of key principles for HTA and indicates considerable room for improvement for HTA organizations to adopt principles identified to reflect good HTA practices. Most HTA organizations espouse certain general concepts of good practice--for example, assessments should be unbiased and transparent. However, principles that require more intensive follow-up--for example, monitoring the implementation of HTA findings--have received little support and execution.

  20. The International Experience of the State Support for Creating the Transport and Logistics Centers

    Directory of Open Access Journals (Sweden)

    Zharska Iryna O.

    2017-02-01

    Full Text Available The article is aimed at analysis and synthesis of the international experience as to the State support for creating the transport and logistics centers (TLCs. The causes for emergence of the first TLCs in Europe (60-80-ies of XX century were considered. Values of the LPI index for the countries occupying the first 40 positions of the ranking as of 2014 and of 2016 have been provided, and the major changes during this time have been analyzed. The ranking position of Ukraine is displayed separately. Features of the logistics infrastructure of nine countries with a high value of the LPI index have been considered, degree of the State involvement in the formation of the TLC network has been analyzed. It has been substantiated that creation of the transport and logistics centers allows to reduce the logistics costs of individual producers and contributes to enhancing the efficiency of operation of the national economy in general by attracting investments in the infrastructure development, increasing the number of jobs and tax revenues. The basic motifs that determine the interest of the State authorities in providing support for creating the transportation and logistics centers have been defined. Prospect for further research in this direction will be determining the efficiency of using the different models of the State support for creation and development of TLCs

  1. Proposal of an Observatory of Trends for Nanotechnology in the Context of Technology Management in an Oil and Gas R&D Center – Case: Nanotechnology

    Directory of Open Access Journals (Sweden)

    Viviane Masseran Antunes Parreiras

    2013-12-01

    Full Text Available The paper presents basic concepts on nanotechnology and the use of this in an oil and gas research and development (R&D center, the Research and Development Center Leopoldo Américo Miguez de Mello of Petrobras (CENPES. The aim of this paper is to present a proposal of an observatory of trends in the area of nanotechnology at CENPES, to generate information, such as the state of the art technologies, technological trajectories, movements of competitors and partners, and aspects relating to regulations and incentives for decision making in the technology management process. The model consists of five steps that should occur in a continuous cycle: literature review, expert consultation, analysis of opportunities and threats, timelines or roadmaps, and monitoring. In conclusion, the proposed observatory includes a set of topics (variables, sources, techniques of competitive technical intelligence and technological foresight, systematized in order to support decision making in technology management.

  2. World Calibration Center for SF6 - supporting the quality system of the global atmosphere observation

    Science.gov (United States)

    Lee, J.; Moon, D.; Min, D.; Yun, W.

    2012-10-01

    According to the World Meteorological Organization (WMO) Global Atmosphere Watch (GAW) Strategic Plan: 2008-2015 (WMO, 2009a) WMO/GAW pays attention to systematical improvement of the quality of observations at global or regional monitoring sites. To ensure the comparability and compatibility of the measurements worldwide it is essential to maintain a traceability chain to the primary standard in the different laboratories around the world as well as to establish a quality control system. Sulfur hexafluoride (SF6), is reported to be very rare in the atmosphere at the global averaged annual mole fraction of about 7 ppt, it is one of the greenhouse gases regulated by Kyoto protocol and is increasing at a rate of 0.22 ppt yr-1. Development of a working (or transfer) standard with very low concentration of SF6 requires expert technologies and several knowhow of gas metrology. In order to meet the Data Quality Objective (DQO), the KMA has cooperated with the Korea Research Institute of Standards and Science (KRISS), which is the National Metrology Institute in South Korea. So long as the Central Calibration Laboratory (CCL) for SF6 was established, the Korea Meteorological Administration (KMA) is now trying to take another step forward to systematically support GAW stations in improving their traceability and quality system for SF6, thereby making a contribution to the WMO/GAW. Through hosting the World Calibration Center for SF6, which is one of GAW facilities, KMA will contribute to harmonization of the global SF6 observations in the long run. This work performed to demonstrate some measurement results on SF6 which complies with the DQOs and is traceable to the WMO mole fraction scale for SF6. In order to produce a working standard which is traceable to the WMO scale, we developed highly precise method of a Gas Chromatography/Electron Capture Detector (GC/ECD) calibrated against the five cylinders (from NOAA, 2011) of the WMO scale. For all analysis the measurement

  3. Evaluation of a Dedicated Tobacco Cessation Support Service for Thoracic Cancer Center Patients.

    Science.gov (United States)

    Amato, Katharine A; Reid, Mary E; Ochs-Balcom, Heather M; Giovino, Gary A; Bansal-Travers, Maansi; Warren, Graham W; Mahoney, Martin C; Hyland, Andrew J

    2017-12-22

    Cancer patients' continued tobacco use results in poorer therapeutic outcomes including decreased quality of life and survival. To assess reach and impact of a free, opt-out, telephone-based tobacco cessation program for thoracic cancer center patients. Observational study. Comprehensive Cancer Center in Western New York. Current or recent (within past 30 days) tobacco-using thoracic cancer center patients referred to a tobacco cessation support service between October 2010 and October 2012 at a Comprehensive Cancer Center (n = 942/1313 referrals were eligible for cessation support). A free, opt-out, telephone-based cessation service that was implemented as standard of care. Cessation specialists had patient-guided conversations that assessed readiness to quit; methods used in the past provided cessation strategies and worked to set up a quit date. There was an average of 35.9 days between referral and first contact. Program reach (referral and participation rates) and impact (as self-reported cessation outcomes measured twice after referral). Of 942 patients, 730 (77.5%) referred to and called by a tobacco cessation service participated in at least 1 cessation support call, of which 440 of 730 (60.3%) were called for follow-up and 89.5% (394/440) participated. In total, 20.2% (69/342) of current smokers at referral reported at least 7-day abstinence at follow-up. Among current smokers at referral and first contact, being married (odds ratio [OR] = 2.05; 95% confidence interval [CI], 1.01-4.18) and having a lower Eastern Cooperative Oncology Group (ECOG) performance score (OR = 4.05; 95% CI, 1.58-10.39) were associated with quitting at follow-up, after controlling for demographic, clinical, and health behavior characteristics. Our results demonstrate that 78% of thoracic cancer center patients, if contacted, participated at least once in this cessation support service; for current smokers at referral and first contact, being married and having a lower ECOG

  4. Ford/BASF/UM Activities in Support of the Hydrogen Storage Engineering Center of Excellence

    Energy Technology Data Exchange (ETDEWEB)

    Veenstra, Mike [Ford Motor Company, Dearborn, MI (United States); Purewal, Justin [Ford Motor Company, Dearborn, MI (United States); Xu, Chunchuan [Ford Motor Company, Dearborn, MI (United States); Yang, Jun [Ford Motor Company, Dearborn, MI (United States); Blaser, Rachel [Ford Motor Company, Dearborn, MI (United States); Sudik, Andrea [Ford Motor Company, Dearborn, MI (United States); Siegel, Don [Univ. of Michigan, Ann Arbor, MI (United States); Ming, Yang [Univ. of Michigan, Ann Arbor, MI (United States); Liu, Dong' an [Univ. of Michigan, Ann Arbor, MI (United States); Chi, Hang [Univ. of Michigan, Ann Arbor, MI (United States); Gaab, Manuela [BASF SE, Ludwigshafen (Germany); Arnold, Lena [BASF SE, Ludwigshafen (Germany); Muller, Ulrich [BASF SE, Ludwigshafen (Germany)

    2015-06-30

    Widespread adoption of hydrogen as a vehicular fuel depends critically on the development of low-cost, on-board hydrogen storage technologies capable of achieving high energy densities and fast kinetics for hydrogen uptake and release. As present-day technologies -- which rely on physical storage methods such as compressed hydrogen -- are incapable of attaining established Department of Energy (DOE) targets, development of materials-based approaches for storing hydrogen have garnered increasing attention. Material-based storage technologies have potential to store hydrogen beyond twice the density of liquid hydrogen. To hasten development of these ‘hydride’ materials, the DOE previously established three centers of excellence for materials storage R&D associated with the key classes of materials: metal hydrides, chemical hydrogen, and adsorbents. While these centers made progress in identifying new storage materials, the challenges associated with the engineering of the system around a candidate storage material are in need of further advancement. In 2009 the DOE established the Hydrogen Storage Engineering Center of Excellence with the objective of developing innovative engineering concepts for materials-based hydrogen storage systems. As a partner in the Hydrogen Storage Engineering Center of Excellence, the Ford-UM-BASF team conducted a multi-faceted research program that addresses key engineering challenges associated with the development of materials-based hydrogen storage systems. First, we developed a novel framework that allowed for a material-based hydrogen storage system to be modeled and operated within a virtual fuel cell vehicle. This effort resulted in the ability to assess dynamic operating parameters and interactions between the storage system and fuel cell power plant, including the evaluation of performance throughout various drive cycles. Second, we engaged in cost modeling of various incarnations of the storage systems. This analysis

  5. Unlocking the black box: supporting practices to become patient-centered medical homes.

    Science.gov (United States)

    Coleman, Katie; Phillips, Kathryn E; Van Borkulo, Nicole; Daniel, Donna M; Johnson, Karin E; Wagner, Edward H; Sugarman, Jonathan R

    2014-11-01

    Despite widespread interest in supporting primary care transformation, few evidence-based strategies for technical assistance exist. The Safety Net Medical Home Initiative (SNMHI) sought to develop a replicable and sustainable model for Patient-centered Medical Home practice transformation. This paper describes the multimodal technical assistance approach used by the SNMHI and the participating practices' assessment of its value and helpfulness in supporting their transformation. Components of the technical assistance framework included: (1) individual site-level coaching provided by local medical home facilitators and supplemented by expert consultation; (2) regional and national learning communities of participating practices that included in-person meetings and field trips; (3) data monitoring and feedback including longitudinal feedback on medical home implementation as measured by the Patient-centered Medical Home-A; (4) written implementation guides, tools, and webinars relating to each of the 8 Change Concepts for Practice Transformation; and (5) small grant funds to support infrastructure and staff development. Overall, practices found the technical assistance helpful and most valued in-person, peer-to-peer-learning opportunities. Practices receiving technical assistance from membership organizations with which they belonged before the SNMHI scored higher on measures of medical home implementation than practices working with organizations with whom they had no prior relationship. There is an important role for both local and national organizations to provide nonduplicative, mutually reinforcing support for primary care transformation. How (in-person, between-peers) and by whom technical assistance is provided may be important to consider.

  6. Impact of Information Technology, Clinical Resource Constraints, and Patient-Centered Practice Characteristics on Quality of Care

    Directory of Open Access Journals (Sweden)

    JongDeuk Baek

    2015-02-01

    Full Text Available Objective: Factors in the practice environment, such as health information technology (IT infrastructure, availability of other clinical resources, and financial incentives, may influence whether practices are able to successfully implement the patient-centered medical home (PCMH model and realize its benefits. This study investigates the impacts of those PCMH-related elements on primary care physicians’ perception of quality of care. Methods: A multiple logistic regression model was estimated using the 2004 to 2005 CTS Physician Survey, a national sample of salaried primary care physicians (n = 1733. Results: The patient-centered practice environment and availability of clinical resources increased physicians’ perceived quality of care. Although IT use for clinical information access did enhance physicians’ ability to provide high quality of care, a similar positive impact of IT use was not found for e-prescribing or the exchange of clinical patient information. Lack of resources was negatively associated with physician perception of quality of care. Conclusion: Since health IT is an important foundation of PCMH, patient-centered practices are more likely to have health IT in place to support care delivery. However, despite its potential to enhance delivery of primary care, simply making health IT available does not necessarily translate into physicians’ perceptions that it enhances the quality of care they provide. It is critical for health-care managers and policy makers to ensure that primary care physicians fully recognize and embrace the use of new technology to improve both the quality of care provided and the patient outcomes.

  7. Impact of Information Technology, Clinical Resource Constraints, and Patient-Centered Practice Characteristics on Quality of Care.

    Science.gov (United States)

    Baek, JongDeuk; Seidman, Robert L

    2015-01-01

    Factors in the practice environment, such as health information technology (IT) infrastructure, availability of other clinical resources, and financial incentives, may influence whether practices are able to successfully implement the patient-centered medical home (PCMH) model and realize its benefits. This study investigates the impacts of those PCMH-related elements on primary care physicians' perception of quality of care. A multiple logistic regression model was estimated using the 2004 to 2005 CTS Physician Survey, a national sample of salaried primary care physicians (n = 1733). The patient-centered practice environment and availability of clinical resources increased physicians' perceived quality of care. Although IT use for clinical information access did enhance physicians' ability to provide high quality of care, a similar positive impact of IT use was not found for e-prescribing or the exchange of clinical patient information. Lack of resources was negatively associated with physician perception of quality of care. Since health IT is an important foundation of PCMH, patient-centered practices are more likely to have health IT in place to support care delivery. However, despite its potential to enhance delivery of primary care, simply making health IT available does not necessarily translate into physicians' perceptions that it enhances the quality of care they provide. It is critical for health-care managers and policy makers to ensure that primary care physicians fully recognize and embrace the use of new technology to improve both the quality of care provided and the patient outcomes.

  8. [Continuing education and matrix support: training, experience, and practices of health professionals in the Centers for the Support of Family Health and the supported teams].

    Science.gov (United States)

    Bispo, José Patrício; Moreira, Diane Costa

    2017-09-28

    : This study aimed to understand and analyze how processes of continuing education are experienced by professionals in the Centers for the Support of Family Health (NASF) and family health teams. The aim was also to understand how matrix support as a strategy for continuing education was incorporated into the work of these professionals. This was a multiple case study with a qualitative approach in six municipalities in southeast Bahia State, Brazil, which had type-I NASF. Semi-structured interviews were held with 43 NASF professionals and 40 with physicians and nurses from the supported teams. The interviews were categorized and analyzed using thematic content analysis. The results showed that the activities in continuing education are insufficient and inadequate, with a supply of sporadic training developed with a traditional teaching methodology. Continuing education had not been institutionally consolidated in the six municipalities. Training in matrix support and the work process in the NASF proved weak for both groups, which interfered in the support function and management of care. The study revealed the limited action of NASF as promotors of continuing education for the supported teams.

  9. Patient-Centered Decision Support: Formative Usability Evaluation of Integrated Clinical Decision Support With a Patient Decision Aid for Minor Head Injury in the Emergency Department.

    Science.gov (United States)

    Melnick, Edward R; Hess, Erik P; Guo, George; Breslin, Maggie; Lopez, Kevin; Pavlo, Anthony J; Abujarad, Fuad; Powsner, Seth M; Post, Lori A

    2017-05-19

    The Canadian Computed Tomography (CT) Head Rule, a clinical decision rule designed to safely reduce imaging in minor head injury, has been rigorously validated and implemented, and yet expected decreases in CT were unsuccessful. Recent work has identified empathic care as a key component in decreasing CT overuse. Health information technology can hinder the clinician-patient relationship. Patient-centered decision tools to support the clinician-patient relationship are needed to promote evidence-based decisions. Our objective is to formatively evaluate an electronic tool that not only helps clinicians at the bedside to determine the need for CT use based on the Canadian CT Head Rule but also promotes evidence-based conversations between patients and clinicians regarding patient-specific risk and patients' specific concerns. User-centered design with practice-based and participatory decision aid development was used to design, develop, and evaluate patient-centered decision support regarding CT use in minor head injury in the emergency department. User experience and user interface (UX/UI) development involved successive iterations with incremental refinement in 4 phases: (1) initial prototype development, (2) usability assessment, (3) field testing, and (4) beta testing. This qualitative approach involved input from patients, emergency care clinicians, health services researchers, designers, and clinical informaticists at every stage. The Concussion or Brain Bleed app is the product of 16 successive iterative revisions in accordance with UX/UI industry design standards. This useful and usable final product integrates clinical decision support with a patient decision aid. It promotes shared use by emergency clinicians and patients at the point of care within the emergency department context. This tablet computer app facilitates evidence-based conversations regarding CT in minor head injury. It is adaptable to individual clinician practice styles. The resultant tool

  10. Accelerator laboratories: development centers for experimental physics and technology in Mexico

    International Nuclear Information System (INIS)

    Mazari, M.

    1989-01-01

    Three years ago in this Nuclear Center the author and Professor Graef expounded the inception and development of experimental physics and new techniques centered about laboratories and equipped in our country with positive ion accelerators. Extracted here is the information on the laboratories that have allowed professional training as well as the furtherance of scientific productivity in each group. An additional proposal as to how the technical groups knowledgeable in advanced technology might contribute significantly to adequate preparation of youth at the intermediate level able to generate innocuous micro industries in their own neighbourhood. (Author). 5 refs, 2 figs, 2 tabs

  11. Development and evaluation of a dismantling planning support system based on augmented reality technology

    International Nuclear Information System (INIS)

    Ishii, Hirotake; Oshita, Satoshi; Yan Weida; Shimoda, Hiroshi; Izumi, Masanori

    2011-01-01

    For this study, a Dismantling Planning Support System (DPSS) based on Augmented Reality technology was developed. Its effectiveness and applicability to a real working field were evaluated using a subjective experiment. The DPSS operators can simulate how to locate scaffolding and temporary enclosures (greenhouses) in a real dismantling field in order to decide their layout and to predict the amounts of necessary parts. An interview and questionnaire survey were conducted with Fugen Decommissioning Engineering Center (DEC) staff and a human interface expert, who used DPSS along with a scenario in which scaffolding and greenhouses were located in a turbine cooling water room of Fugen DEC. The experimental results show that the operation for locating the virtual scaffolding and greenhouses using marker boards is intuitive and comprehensive. However, additional research needs to be undertaken in order to improve the DPSS, particularly with respect to its graphical user interface. (author)

  12. Association between psychological status with perceived social support in pregnant women referring to Tabriz health centers.

    Science.gov (United States)

    Shafaie, Fahimeh Sehhatie; Mirghafourvand, Mojgan; Rahmati, Mahbubeh; Nouri, Parviz; Bagherinia, Marzieh

    2018-06-01

    The aim of this study was to determine the relationship between the psychological status of pregnant women with perceived social support. In this cross-sectional study, 372 Iranian women were selected randomly via a two-stage cluster sampling method at the third trimester of pregnancy in healthcare centers of Tabriz-Iran. Data were collected using the socio-demographic characteristics questionnaire, perceived social support (PRQ-85) and the short form of depression, anxiety, and stress (DASS-21). The statistical tests including Spearman's correlation, Mann-Whitney, Kruskal Wallis, and linear regression model were used for data. The mean (SD) score of perceived social support 131.5 (18.9) with a range of 25-175 was achieved. In terms of the scale of mental health, median (25-75 percentile) of the score of anxiety 4.0 (3.0-7.0), depression 1.0 (0.0-6.0), and stress 8.0 (0.6-10.0) was achieved. There was a significant negative correlation between perceived social support with anxiety (r = -.355, p < .001), depression (r = -.541, p < .001), and stress in women (r = -.302, p < .001). The results of this study showed that social support affects the mental state of women in the third trimester of pregnancy and the levels of anxiety, depression, and stress decrease in pregnant women with increasing of social support.

  13. WLAN Positioning Methods and Supporting Learning Technologies for Mobile Platforms

    Science.gov (United States)

    Melkonyan, Arsen

    2013-01-01

    Location technologies constitute an essential component of systems design for autonomous operations and control. The Global Positioning System (GPS) works well in outdoor areas, but the satellite signals are not strong enough to penetrate inside most indoor environments. As a result, a new strain of indoor positioning technologies that make use of…

  14. Supporting Friendly Atmosphere in a Classroom by Technology Implementation

    Science.gov (United States)

    Lukaš, Mirko

    2014-01-01

    Extremely rapid development of information technology and the lack of monopoly in the technological market have resulted in a sudden price reduction of the informatic equipment and gadgets enabling them to be used in all segments of a human life, hence the education as well. In the modern, digital era it is almost impossible to make any…

  15. The Use of DOE Technologies at The World Trade Center Incident: Lessons Learned

    International Nuclear Information System (INIS)

    McCabe, B.; Kovach, J.; Carpenter, C.; Blair, D.

    2003-01-01

    In response to the attack of the World Trade Center (WTC) on September 11, 2001, the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) assembled and deployed a HAZMAT Emergency Management Team (Team) to the disaster site (Site). The response team consisted of a Certified Industrial Hygienist and a rotating team of industrial hygienists, safety professionals, and certified HAZMAT instructors. Through research funded by the Department of Energy (DOE) Office of Environmental Management (EM) and managed by the National Energy Technology Laboratory (NETL), the IUOE conducted human factors assessments on baseline and innovative technologies during real-world conditions and served as an advocate at the WTC disaster site to identify opportunities for the use and evaluation of DOE technologies. From this work, it is clear that opportunities exist for more DOE technologies to be made readily available for use in future emergencies

  16. The Use of DOE Technologies at The World Trade Center Incident: Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    McCabe, B.; Kovach, J.; Carpenter, C.; Blair, D.

    2003-02-25

    In response to the attack of the World Trade Center (WTC) on September 11, 2001, the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) assembled and deployed a HAZMAT Emergency Management Team (Team) to the disaster site (Site). The response team consisted of a Certified Industrial Hygienist and a rotating team of industrial hygienists, safety professionals, and certified HAZMAT instructors. Through research funded by the Department of Energy (DOE) Office of Environmental Management (EM) and managed by the National Energy Technology Laboratory (NETL), the IUOE conducted human factors assessments on baseline and innovative technologies during real-world conditions and served as an advocate at the WTC disaster site to identify opportunities for the use and evaluation of DOE technologies. From this work, it is clear that opportunities exist for more DOE technologies to be made readily available for use in future emergencies.

  17. Technologies as Support Tools for Persons with Autistic Spectrum Disorder: A Systematic Review

    Science.gov (United States)

    Aresti-Bartolome, Nuria; Garcia-Zapirain, Begonya

    2014-01-01

    This study analyzes the technologies most widely used to work on areas affected by the Autistic Spectrum Disorder (ASD). Technologies can focus on the strengths and weaknesses of this disorder as they make it possible to create controlled environments, reducing the anxiety produced by real social situations. Extensive research has proven the efficiency of technologies as support tools for therapy and their acceptation by ASD sufferers and the people who are with them on a daily basis. This article is organized by the types of systems developed: virtual reality applications, telehealth systems, social robots and dedicated applications, all of which are classified by the areas they center on: communication, social learning and imitation skills and other ASD-associated conditions. 40.5% of the research conducted is found to be focused on communication as opposed to 37.8% focused on learning and social imitation skills and 21.6% which underlines problems associated with this disorder. Although most of the studies reveal how useful these tools are in therapy, they are generic tools for ASD sufferers in general, which means there is a lack of personalised tools to meet each person’s needs. PMID:25093654

  18. Technologies as Support Tools for Persons with Autistic Spectrum Disorder: A Systematic Review

    Directory of Open Access Journals (Sweden)

    Nuria Aresti-Bartolome

    2014-08-01

    Full Text Available This study analyzes the technologies most widely used to work on areas affected by the Autistic Spectrum Disorder (ASD. Technologies can focus on the strengths and weaknesses of this disorder as they make it possible to create controlled environments, reducing the anxiety produced by real social situations. Extensive research has proven the efficiency of technologies as support tools for therapy and their acceptation by ASD sufferers and the people who are with them on a daily basis. This article is organized by the types of systems developed: virtual reality applications, telehealth systems, social robots and dedicated applications, all of which are classified by the areas they center on: communication, social learning and imitation skills and other ASD-associated conditions. 40.5% of the research conducted is found to be focused on communication as opposed to 37.8% focused on learning and social imitation skills and 21.6% which underlines problems associated with this disorder. Although most of the studies reveal how useful these tools are in therapy, they are generic tools for ASD sufferers in general, which means there is a lack of personalised tools to meet each person’s needs.

  19. Nuclear technology: katulong sa pag-unlad ng masa [support for the progress of the masses

    International Nuclear Information System (INIS)

    1999-01-01

    The topics discussed during the convention is the usefulness of nuclear science and technology in national development and to promote the beneficial uses of nuclear science and technology to support for the progress of the masses

  20. Seven Affordances of Computer-Supported Collaborative Learning: How to Support Collaborative Learning? How Can Technologies Help?

    Science.gov (United States)

    Jeong, Heisawn; Hmelo-Silver, Cindy E.

    2016-01-01

    This article proposes 7 core affordances of technology for collaborative learning based on theories of collaborative learning and CSCL (Computer-Supported Collaborative Learning) practices. Technology affords learner opportunities to (1) engage in a joint task, (2) communicate, (3) share resources, (4) engage in productive collaborative learning…

  1. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Waste Disposal Facility

    Energy Technology Data Exchange (ETDEWEB)

    Ansley, Shannon Leigh

    2002-02-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.

  2. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility; TOPICAL

    International Nuclear Information System (INIS)

    Ansley, Shannon L.

    2002-01-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist

  3. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility

    International Nuclear Information System (INIS)

    Ansley, Shannon L.

    2002-01-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist

  4. Technological drivers in data centers and telecom systems: Multiscale thermal, electrical, and energy management

    International Nuclear Information System (INIS)

    Garimella, Suresh V.; Persoons, Tim; Weibel, Justin; Yeh, Lian-Tuu

    2013-01-01

    Highlights: ► Thermal management approaches reviewed against energy usage of IT industry. ► Challenges of energy efficiency in large-scale electronic systems highlighted. ► Underlying drivers for progress at the business and technology levels identified. ► Thermal, electrical and energy management challenges discussed as drivers. ► Views of IT system operators, manufacturers and integrators represented. - Abstract: We identify technological drivers for tomorrow’s data centers and telecommunications systems, including thermal, electrical and energy management challenges, based on discussions at the 2nd Workshop on Thermal Management in Telecommunication Systems and Data Centers in Santa Clara, California, on April 25–26, 2012. The relevance of thermal management in electronic systems is reviewed against the background of the energy usage of the information technology (IT) industry, encompassing perspectives of different sectors of the industry. The underlying drivers for progress at the business and technology levels are identified. The technological challenges are reviewed in two main categories – immediate needs and future needs. Enabling cooling techniques that are currently under development are also discussed

  5. Clinical support role for a pharmacy technician within a primary care resource center.

    Science.gov (United States)

    Fera, Toni; Kanel, Keith T; Bolinger, Meghan L; Fink, Amber E; Iheasirim, Serah

    2018-02-01

    The creation of a clinical support role for a pharmacy technician within a primary care resource center is described. In the Primary Care Resource Center (PCRC) Project, hospital-based care transition coordination hubs staffed by nurses and pharmacist teams were created in 6 independent community hospitals. At the largest site, patient volume for targeted diseases challenged the ability of the PCRC pharmacist to provide expected elements of care to targeted patients. Creation of a new pharmacy technician clinical support role was implemented as a cost-effective option to increase the pharmacist's efficiency. The pharmacist's work processes were reviewed and technical functions identified that could be assigned to a specially trained pharmacy technician under the direction of the PCRC pharmacist. Daily tasks performed by the pharmacy technician included maintenance of the patient roster and pending discharges, retrieval and documentation of pertinent laboratory and diagnostic test information from the patient's medical record, assembly of patient medication education materials, and identification of discrepancies between disparate systems' medication records. In the 6 months after establishing the PCRC pharmacy technician role, the pharmacist's completion of comprehensive medication reviews (CMRs) for target patients increased by 40.5% ( p = 0.0223), driven largely by a 42.4% ( p team extended the reach of the pharmacist and allowed more time for the pharmacist to engage patients. Technician support enabled the pharmacist to complete more CMRs and reduced the time required for chart reviews. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  6. Technology test bed and hydrogen cold flow facilities at the Marshall Space Flight Center

    Science.gov (United States)

    Lightfoot, Robert; Gautney, Tim

    1993-01-01

    The Technology Test Bed and Hydrogen Cold Flow facilities at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama provide unique testing capabilities for the aerospace community. Located at the Advanced Engine Test Facility (AETF), these facilities are operated and maintained by MSFC Propulsion Laboratory personnel. They provide a systems and components level testing platform for validating new technology concepts and advanced systems design and for gaining a better understanding of the test article internal environments. A discussion follows of the particular capabilities of each facility to provide a range of testing options for specific test articles.

  7. Interdisciplinarity and Ubiquitous Internet Technologies in Support of Automation

    Directory of Open Access Journals (Sweden)

    Eduard Babulak Prof., Ph.D., P.Eng., Eur.Ing., C.Eng.,

    2006-02-01

    Full Text Available The Telecommunications and Internet Technologies have evolved dramatically during the last decade, laying solid foundation for the future generation of the Ubiquitous Internet access, omnipresent web technologies and ultimate automated information cyberspace. Recent technological advancements in the areas of global mobility, wireless technologies and miniaturization are driven by the economic and social prosperity. The current state of the art in Differentiated Networks, Health Informatics, Advanced Television, Sensor Networks, MIMO Systems, and recent experiments conducted in the Quantum and Bio Computing open a new horizon for the Future Technologies. As a result, the current efforts in the research and development in the areas of Next Generation of Internet and Telecommunications Technologies promotes formation of inter-disciplinary international teams of experts, scientists, researchers and engineers to create a new generation of applications and technologies that will facilitate the fully-automated information cyberspace systems, such as Future House 2015. The speed and omnipresent accessibility to Internet providing any information at any time from anywhere will create global very complex communications infrastructures. The increased number of Internet sites worldwide will ultimately generate large number of performance bottlenecks and technical faults that may put in danger essential resources for societies world-wide such as energy supplies, national security, financial integrity, transportation logistics and ultimately human safety. The author discusses the current state of the art in the world of Telecommunications and Internet Technologies, new technological trends directions in the Internet and Automation Industries, as well as the concept of the Fully-automated Future House 2015. The paper presents a survey of current developments and future directions in Telecommunications Industry and Automation while promoting research and

  8. An analysis of collaborative technological advancements achieved through the Center for Network Innovation and Experimentation

    OpenAIRE

    Quarles, Eric L.

    2008-01-01

    The primary focus of this thesis is to produce an analysis of collaborative technology advancements experienced through the experimental cycles which the members of the Naval Postgraduate School Center for Network Innovation and Experimentation (CENETIX) participate. These experiments, which include Maritime Interdiction Operations (MIO) and Tactical Network Topology (TNT) scenarios, have advanced a great deal since their inception and there is a need for a detailed study into which c...

  9. Tiger Team Assessment of the Pittsburgh Energy Technology Center, [August 19--September 13, 1991

    International Nuclear Information System (INIS)

    1991-09-01

    This report documents the results of the Department of Energy (DOE) Tiger Team Assessment conducted at Pittsburgh Energy Technology Center (PETC) near Pittsburgh, Pennsylvania, between August 19 and September 13, 1991. A team comprised of professionals from the Department, its contractors, and consultants conducted the assessment. The purpose of the assessment was to provide the Secretary of Energy the status of environment, safety, and health (ES ampersand H) programs at PETC. A management assessment was performed

  10. Biofloc technology application in aquaculture to support sustainable development goals.

    Science.gov (United States)

    Bossier, Peter; Ekasari, Julie

    2017-09-01

    Biofloc technology (BFT) application offers benefits in improving aquaculture production that could contribute to the achievement of sustainable development goals. This technology could result in higher productivity with less impact to the environment. Furthermore, biofloc systems may be developed and performed in integration with other food production, thus promoting productive integrated systems, aiming at producing more food and feed from the same area of land with fewer input. The biofloc technology is still in its infant stage. A lot more research is needed to optimise the system (in relation to operational parameters) e.g. in relation to nutrient recycling, MAMP production, immunological effects. In addition research findings will need to be communicated to farmers as the implementation of biofloc technology will require upgrading their skills. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

  11. Technology Advancements Enhance Aircraft Support of Experiment Campaigns

    Science.gov (United States)

    Vachon, Jacques J.

    2009-01-01

    For over 30 years, the NASA Airborne Science Program has provided airborne platforms for space bound instrument development, for calibrating new and existing satellite systems, and for making in situ and remote sensing measurements that can only be made from aircraft. New technologies have expanded the capabilities of aircraft that are operated for these missions. Over the last several years a new technology investment portfolio has yielded improvements that produce better measurements for the airborne science communities. These new technologies include unmanned vehicles, precision trajectory control and advanced telecommunications capabilities. We will discuss some of the benefits of these new technologies and systems which aim to provide users with more precision, lower operational costs, quicker access to data, and better management of multi aircraft and multi sensor campaigns.

  12. Decision support for selecting SLM technologies with stakeholders

    NARCIS (Netherlands)

    Schwilch, G.; Bachmann, F.; Graaff, de J.

    2012-01-01

    Sustainable Land Management (SLM) is a classic multi-stakeholder issue, concerning individual and community land users, agricultural advisors, natural resource managers, government authorities, civil society, and researchers alike. Selecting appropriate SLM technologies for implementation requires

  13. Can New Digital Technologies Support Parasitology Teaching and Learning?

    Science.gov (United States)

    Jabbar, Abdul; Gasser, Robin B; Lodge, Jason

    2016-07-01

    Traditionally, parasitology courses have mostly been taught face-to-face on campus, but now digital technologies offer opportunities for teaching and learning. Here, we give a perspective on how new technologies might be used through student-centred teaching approaches. First, a snapshot of recent trends in the higher education is provided; then, a brief account is given of how digital technologies [e.g., massive open online courses (MOOCs), flipped classroom (FC), games, quizzes, dedicated Facebook, and digital badges] might promote parasitology teaching and learning in digital learning environments. In our opinion, some of these digital technologies might be useful for competency-based, self-regulated, learner-centred teaching and learning in an online or blended teaching environment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Readiness for meaningful use of health information technology and patient centered medical home recognition survey results.

    Science.gov (United States)

    Shin, Peter; Sharac, Jessica

    2013-01-01

    Determine the factors that impact HIT use and MU readiness for community health centers (CHCs). The HITECH Act allocates funds to Medicaid and Medicare providers to encourage the adoption of electronic health records (EHR), in an effort to improve health care quality and patient outcomes, and to reduce health care costs. We surveyed CHCs on their Readiness for Meaningful Use (MU) of Health Information Technology (HIT) and Patient Centered Medical Home (PCMH) Recognition, then we combined responses with 2009 Uniform Data System data to determine which factors impact use of HIT and MU readiness. Nearly 70% of CHCs had full or partial EHR adoption at the time of survey. Results are presented for centers with EHR adoption, by the length of time that their EHR systems have been in operation.

  15. A project in support of Nuclear Technology Cooperation

    International Nuclear Information System (INIS)

    Jung, Ki Jung; Choi, Pyong Hoon; Yi, Ji Ho

    2005-12-01

    Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy informations and computer software developed in the advanced countries. - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate

  16. Biofloc technology application in aquaculture to support sustainable development goals

    OpenAIRE

    Bossier, Peter; Ekasari, Julie

    2017-01-01

    Summary Biofloc technology (BFT) application offers benefits in improving aquaculture production that could contribute to the achievement of sustainable development goals. This technology could result in higher productivity with less impact to the environment. Furthermore, biofloc systems may be developed and performed in integration with other food production, thus promoting productive integrated systems, aiming at producing more food and feed from the same area of land with fewer input. The...

  17. Biofloc technology application in aquaculture to support sustainable development goals

    OpenAIRE

    Bossier, P.; Ekasari, J.

    2017-01-01

    Biofloc technology (BFT) application offers benefits in improving aquaculture production that could contribute to the achievement of sustainable development goals. This technology could result in higher productivity with less impact to the environment. Furthermore, biofloc systems may be developed and performed in integration with other food production, thus promoting productive integrated systems, aiming at producing more food and feed from the same area of land with fewer input. The biofloc...

  18. Patient-centered applications: use of information technology to promote disease management and wellness. A white paper by the AMIA knowledge in motion working group.

    Science.gov (United States)

    Demiris, George; Afrin, Lawrence B; Speedie, Stuart; Courtney, Karen L; Sondhi, Manu; Vimarlund, Vivian; Lovis, Christian; Goossen, William; Lynch, Cecil

    2008-01-01

    Advances in information technology (IT) enable a fundamental redesign of health care processes based on the use and integration of electronic communication at all levels. New communication technologies can support a transition from institution centric to patient-centric applications. This white paper defines key principles and challenges for designers, policy makers, and evaluators of patient-centered technologies for disease management and prevention. It reviews current and emerging trends; highlights challenges related to design, evaluation, reimbursement and usability; and reaches conclusions for next steps that will advance the domain.

  19. Manpower development and international cooperation in Nuclear Technology and Education Center, JAERI

    International Nuclear Information System (INIS)

    Shiba, Koreyuki; Tojo, Takao; Takada, Kazuo; Nomura, Masayuki

    1996-01-01

    Nuclear Technology and Education Center was founded in 1958 and now has two branches, Tokyo Education Center at Bunkyo-ku, Tokyo and Tokai Education Center at Tokai, Ibaraki-ken. The objective was to educate and train nuclear engineers and scientists for implementing the nation's program of atomic energy research, development and utilization. A variety of training courses have been prepared and carried out to meet the requirements of the nuclear community. In recent years, activities of getting the public acceptance have become important for nuclear energy deployment in Japan. Many short courses have been implemented at JAERI sites and cities for providing the public including high school teachers with basic knowledge on nuclear energy. International training programs of the center were started with the cooperation of the Japan International Cooperation Agency (JICA) in 1985 and of the International Atomic Energy Agency (IAEA) in 1987. International seminars were implemented for improving nuclear safety by inviting participants from the former Soviet Union, central/east European countries and the neighboring countries of Japan under the direction of the Science and Technology Agency (STA) in 1992. STA and JAERI are starting new programs of helping Asian and Pacific countries to develop nuclear manpower. (author)

  20. Stakeholder Focus Groups to Inform a Technology-Based Strategy of Preceptor Support

    Directory of Open Access Journals (Sweden)

    Cynthia A. Blum

    2012-01-01

    Full Text Available While preceptors are a vital link in student nurse practice education, ongoing support beyond an initial orientation is often lacking. It has been reported in the literature that preceptors experience stress related to difficulties in handling preceptee situations. They are frustrated by negative experiences centered on preceptor-identified hallmarks of unsafe practice including the inability to demonstrate knowledge and skills; attitude problems; unprofessional behavior; and poor communication skills. Their unrealized expectations for novices threaten their commitment to their preceptor role. As part of a larger study testing the effectiveness of podcasts as an ongoing method of preceptor support, this paper addresses the developmental stage of the podcasts. A team of academic and acute care nurse educators developed scripts for eventual filming of four podcasts focusing on unsafe practice issues, designed to provide continual support through web-based availability. The use of podcast technology is consistent with the learning styles of digital natives and is a demonstrated and valuable educational resource to review, reinforce, and clarify difficult concepts. These podcasts were informed through preceptor focus groups to address situational and environmental realism for student behaviors and preceptor responses.

  1. Technology Support for Discussion Based Learning: From Computer Supported Collaborative Learning to the Future of Massive Open Online Courses

    Science.gov (United States)

    Rosé, Carolyn Penstein; Ferschke, Oliver

    2016-01-01

    This article offers a vision for technology supported collaborative and discussion-based learning at scale. It begins with historical work in the area of tutorial dialogue systems. It traces the history of that area of the field of Artificial Intelligence in Education as it has made an impact on the field of Computer-Supported Collaborative…

  2. Strategic need for a multi-purpose thermal hydraulic loop for support of advanced reactor technologies

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, James E. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States); Yoon, Su -Jong [Idaho National Lab. (INL), Idaho Falls, ID (United States); Housley, Gregory K. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    This report presents a conceptual design for a new high-temperature multi fluid, multi loop test facility for the INL to support thermal hydraulic, materials, and thermal energy storage research for nuclear and nuclear-hybrid applications. In its initial configuration, the facility will include a high-temperature helium loop, a liquid salt loop, and a hot water/steam loop. The three loops will be thermally coupled through an intermediate heat exchanger (IHX) and a secondary heat exchanger (SHX). Research topics to be addressed with this facility include the characterization and performance evaluation of candidate compact heat exchangers such as printed circuit heat exchangers (PCHEs) at prototypical operating conditions, flow and heat transfer issues related to core thermal hydraulics in advanced helium-cooled and salt-cooled reactors, and evaluation of corrosion behavior of new cladding materials and accident-tolerant fuels for LWRs at prototypical conditions. Based on its relevance to advanced reactor systems, the new facility has been named the Advanced Reactor Technology Integral System Test (ARTIST) facility. Research performed in this facility will advance the state of the art and technology readiness level of high temperature intermediate heat exchangers (IHXs) for nuclear applications while establishing the INL as a center of excellence for the development and certification of this technology. The thermal energy storage capability will support research and demonstration activities related to process heat delivery for a variety of hybrid energy systems and grid stabilization strategies. Experimental results obtained from this research will assist in development of reliable predictive models for thermal hydraulic design and safety codes over the range of expected advanced reactor operating conditions. Proposed/existing IHX heat transfer and friction correlations and criteria will be assessed with information on materials compatibility and instrumentation

  3. Cloud Computing Applications in Support of Earth Science Activities at Marshall Space Flight Center

    Science.gov (United States)

    Molthan, Andrew L.; Limaye, Ashutosh S.; Srikishen, Jayanthi

    2011-01-01

    Currently, the NASA Nebula Cloud Computing Platform is available to Agency personnel in a pre-release status as the system undergoes a formal operational readiness review. Over the past year, two projects within the Earth Science Office at NASA Marshall Space Flight Center have been investigating the performance and value of Nebula s "Infrastructure as a Service", or "IaaS" concept and applying cloud computing concepts to advance their respective mission goals. The Short-term Prediction Research and Transition (SPoRT) Center focuses on the transition of unique NASA satellite observations and weather forecasting capabilities for use within the operational forecasting community through partnerships with NOAA s National Weather Service (NWS). SPoRT has evaluated the performance of the Weather Research and Forecasting (WRF) model on virtual machines deployed within Nebula and used Nebula instances to simulate local forecasts in support of regional forecast studies of interest to select NWS forecast offices. In addition to weather forecasting applications, rapidly deployable Nebula virtual machines have supported the processing of high resolution NASA satellite imagery to support disaster assessment following the historic severe weather and tornado outbreak of April 27, 2011. Other modeling and satellite analysis activities are underway in support of NASA s SERVIR program, which integrates satellite observations, ground-based data and forecast models to monitor environmental change and improve disaster response in Central America, the Caribbean, Africa, and the Himalayas. Leveraging SPoRT s experience, SERVIR is working to establish a real-time weather forecasting model for Central America. Other modeling efforts include hydrologic forecasts for Kenya, driven by NASA satellite observations and reanalysis data sets provided by the broader meteorological community. Forecast modeling efforts are supplemented by short-term forecasts of convective initiation, determined by

  4. Communication Technologies Support to Railway Infrastructure and Operations

    DEFF Research Database (Denmark)

    Sniady, Aleksander

    technology. In the research work presented in this thesis, GSM-R technology is analysed and its main shortcomings are identified, namely: lack of capacity, limited data transmission capabilities, and inefficiency in radio resource usage. Due to these significant disadvantages, alternative mobile technologies...... important railway applications: European Train Control System (ETCS) signalling and railway-specific voice communication. Therefore, LTE is technically capable of replacing GSM-R as the communication network for the European Rail Traffic Management System (ERTMS). Moreover, the simulation results show...... availability and reduction of inter-cell handover rate for running trains. It also enables railways to use new high-frequency radio bands, which is not a feasible option in the classical railway radio deployments. Simulation results indicate that the macro/micro architecture offers huge capacity increase...

  5. A project in support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Ki Jung; Choi, Pyong Hoon; Yi, Ji Ho (and others)

    2005-12-15

    Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy informations and computer software developed in the advanced countries. - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate.

  6. Pathways to Commercial Success: Technologies and Products Supported by the Hydrogen, Fuel Cells and Infrastructure Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-08-01

    This report documents the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Hydrogen, Fuel Cells and Infrastructure Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  7. [Information technology as a support in the area of education].

    Science.gov (United States)

    Sabanović, Z

    1999-01-01

    Decision Support Systems (DSS) are more and more used and developed, mainly within the management area. It is used at strategic level for global planning and managing the organization; at tactical level for short-term planning, process realization and control. Although many authors state that DSS are used only at global and tactical level, some of them--through practical applications--show that specific DSS can be created in order to support decision in other areas than classical management. Paper describes computer application that efficiently supports organisation of exams at The Department for Medical Informatics of Medical Faculty in Tuzla.

  8. The World Wide Web and Technology Transfer at NASA Langley Research Center

    Science.gov (United States)

    Nelson, Michael L.; Bianco, David J.

    1994-01-01

    NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a Center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of the WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology Opportunities Showcase (TOPS), an industrial partnering showcase that exists on the Web long after the actual 3-day event ended. During its first year on the Web, LaRC also developed several WWW-based information repositories. The Langley Technical Report Server (LTRS), a technical paper delivery system with integrated searching and retrieval, has proved to be quite popular. The NASA Technical Report Server (NTRS), an outgrowth of LTRS, provides uniform access to many logically similar, yet physically distributed NASA report servers. WWW is also the foundation of the Langley Software Server (LSS), an experimental software distribution system which will distribute LaRC-developed software with the possible phase-out of NASA's COSMIC program. In addition to the more formal technology distribution projects, WWW has been successful in connecting people with technologies and people with other people. With the completion of the LaRC reorganization, the Technology Applications Group, charged with interfacing with non-aerospace companies, opened for business with a popular home page.

  9. Surface based factory for the production of life support and technology support products

    Science.gov (United States)

    1987-01-01

    The presence of a manned space colony on Mars may be expected to involve three phases in the utilization of planetary resources: (1) survival phase in which air, water, and food are produced, (2) self sufficiency phase in which chemicals, fuels, pharmaceuticals, polymers, and metals are produced, and (3) export to earth of materials and technology 1 phase in which the unique advantage of the extraterrestrial environment is fully exploited. The Advanced Design Project is administered as an interdisciplinary effort involving students and faculty throughout the College of Engineering. Senior students from Chemical, Civil, Electrical, and Mechanical Engineering are participating as a team. Multi discipline interfacing and coordination are stressed throughout the project. An interdisciplinary senior design course was developed and offered in the Spring of 1987. The first task of the survival phase is that of providing a supply of water and air adequate to support a ten person colony. The project has been divided into three subgroups: (1) design of a manufacturing and storage facility for air, (2) search and drill for water or water-bearing materials, and (3) retrieve, purify, and store potable water. The conceptual design phase has been completed and the project is being documented. The second task of the survival phase is that of providing a replenish able food supply. This task has two requirements: producing a supply of protein and providing an environment for growing plants for food. For the first requirement, we considered the design of a bioreactor system capable of growing beef cells for protein production. For the second, a design must be developed for a manufacturing system to produce materials needed to build a greenhouse farm.

  10. Immigrant Workers Centers in Eastern Massachusetts, USA: Fostering Services, Support, Advocacy, and Community Organizing

    Directory of Open Access Journals (Sweden)

    Humberto Reynoso-Vallejo

    2013-01-01

    Full Text Available Immigrant Workers Centers (IWCs are community-based organizations that have been developed in the United States to promote and protect workers’ rights through support, services, advocacy, and organizing initiatives. The purpose of this research study was to examine how IWCs in the Eastern part of the state of Massachusetts are structured along twelve dimensions of organizational development and community organizing. Qualitative research methods were used to identify shared themes within the six IWCs and three immigrant support organizations, as well as their organizational responses to the current anti-immigrant environment. IWCs constituted a convenience sample which enabled the researchers to gather data utilizing a case study methodology. In-depth semi-structured interviews were conducted between the months of July and September of 2009 to answer the following research questions: 1What are the shared themes for the development of Immigrant Workers Centers?, and 2 How do Immigrant Workers Centers respond to current anti-immigrant sentiment, intolerant immigration policies, and increased exploitation in this troubled economy? Shared themes among the IWCs include prioritizing community organizing for workers’ rights and collective empowerment. Sub-modalities such as education, training and leadership development area common feature. While some individual support is provided, and in some cases, programming, it always is offered within a context that emphasizes the need for collective action to overcome injustice. Issues addressed include health/safety, sexual harassment, discrimination, and various problems associated with wages (underpayment, missed payments, collecting back wages, and lack of overtime pay. IWCs respond to antiimmigrant policies and practices by supporting larger efforts for immigration reformat the municipal, state, and federal levels. Coalitions of IWCS and their allies attempt to make state wide and federal policy changes

  11. Using Mobile Technology to Support Literacy Coaching Practices

    Science.gov (United States)

    Bates, C. C.; Martin, Aqueasha

    2013-01-01

    This article examines literacy coaches' (n = 7) digital note-taking practices using mobile technology and their influence on reflective practice. The study, which employed a design-based approach, investigated the coaches' transition from note-taking by paper and pencil to the note-taking application Evernote. Data included interviews with the…

  12. Supporting Student Research with Semantic Technologies and Digital Archives

    Science.gov (United States)

    Martinez-Garcia, Agustina; Corti, Louise

    2012-01-01

    This article discusses how the idea of higher education students as producers of knowledge rather than consumers can be operationalised by means of student research projects, in which processes of research archiving and analysis are enabled through the use of semantic technologies. It discusses how existing digital repository frameworks can be…

  13. Formal Abstraction in Engineering Education--Challenges and Technology Support

    Science.gov (United States)

    Neuper, Walther A.

    2017-01-01

    This is a position paper in the field of Engineering Education, which is at the very beginning in Europe. It relates challenges in the new field to the emerging technology of (Computer) Theorem Proving (TP). Experience shows, that "teaching" abstract models, for instance the wave equation in mechanical engineering and in electrical…

  14. Increasing Students' Involvement in Technology-Supported Mathematics Lesson Sequences

    Science.gov (United States)

    Prodromou, Theodosia; Lavicza, Zsolt; Koren, Balazs

    2015-01-01

    This article aims to report on a pilot or proof of concept study with experienced Hungarian teachers who introduced mathematical concepts through a sequence of lessons utilising a pedagogical framework (Lavicza, Hohenwarter, Jones, Lu and Dawes, 2009a and Lavicza, Hohenwarter and Lu 2009b) for general technology integration. Our aim was to examine…

  15. Radiation protection and safety: for nuclear technology development support

    International Nuclear Information System (INIS)

    San Pedro, A.; Hermida, J.; Fraga, H.

    1996-01-01

    A study about ICRP 60 changes as well as legal aspects and radiation protection activities in Uruguay was reported in this article. Special attention in the personnel dosimetry, radioactive sources control and their national inventory, SSDL, radioactive wastes management and SAMARI system can found among main activities developed in the Radiation Protection and Nuclear Safety Sector in National Nuclear Technology Direction

  16. Technology Applications for Children with ADHD: Assessing the Empirical Support.

    Science.gov (United States)

    Xu, Chunzhen; Reid, Robert; Steckelberg, Allen

    2002-01-01

    This article reviews technology research (n=20) with students with attention deficit hyperactivity disorder (ADHD) in five categories: computer-assisted instruction, computer-based cognitive training, biofeedback training, assessment, and behavior modification. Analysis of available research suggests there is little well controlled experimental…

  17. OLAP TECHNOLOGY AS DECISION-MAKING SUPPORT TOOL

    Directory of Open Access Journals (Sweden)

    D. V. Akushko

    2017-01-01

    Full Text Available The present article discloses the basic principles of work with OLAP technologies, shows key features in comparison with traditional systems of the reporting. The simplified structure of an OLAP cube for the analysis of cost of products of the steelsmelting shop is considered.

  18. TTI Phase 2 Institutional Support: Science, Technology and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    STIPRO's mission is to improve human capacity in science, technology and innovation (STI) policy research. It also aims to raise awareness among government officials and parliamentarians of the critical role of this research for evidence-based STI policies. Its research program focuses on linking food security, agricultural ...

  19. Supporting medical technology development with the analytic hierarchy process

    NARCIS (Netherlands)

    Hummel, J. Marjan

    2001-01-01

    This thesis aims to develop an adequate method of CTA to influence decision making about the development and clinical application of a medical technology. The adequacy of this method is related to the timing of its application, the information used in the assessment, the consensus formation about,

  20. Supporting Striving Readers through Technology-Based Instruction

    Science.gov (United States)

    Laverick, DeAnna M.

    2014-01-01

    The purpose of this research was to determine if reading specialist candidates improve the reading proficiency of their students through the use of digital, technology-based teaching techniques and materials. The candidates were certified teachers who provided individualized and small-group instruction to K-6 children while the candidates were…

  1. Guidelines for supporting placement learning via video communications technologies

    OpenAIRE

    Taylor, Teri

    2014-01-01

    Purpose – Current drivers in higher education have led to the questioning of traditional placement support methods. Within many programmes, students undertaking practice-based learning experience structured, one-to-one support from an academic in the placement location. With the financial and environmental implications of this practice, the potential for using video-based communications as a replacement for face-to-face dialogue was explored. The paper aims to discuss the above issues. \\ud \\u...

  2. Space Technology Demonstrations Using Low Cost, Short-Schedule Airborne and Range Facilities at the Dryden Flight Research Center

    Science.gov (United States)

    Carter, John; Kelly, John; Jones, Dan; Lee, James

    2013-01-01

    There is a national effort to expedite advanced space technologies on new space systems for both government and commercial applications. In order to lower risk, these technologies should be demonstrated in a relevant environment before being installed in new space systems. This presentation introduces several low cost, short schedule space technology demonstrations using airborne and range facilities available at the Dryden Flight Research Center.

  3. Using communication technology to support professional development in teaching science

    Science.gov (United States)

    Sundberg, Cheryl White

    The impact of collaboration via communication technology on follow-up to on-site professional development was the central focus of this hypothesis-generating study. The study used a combination of quantitative methodology and qualitative methodology. A convenient sample of 18 teachers was drawn from 208 teachers in an existing professional development program in science in a southeastern state. The statewide professional development program focused on energy education with a strong emphasis on using technology to enhance learning. Data sources included E-mail messages, lesson plans, photographs, workshop evaluations, surveys, and the report of an external reviewer. The study focused on two on-site workshops, February and June 2000 that were designed to model constructivist pedagogy and instruct teachers in effective utilization of computer-based laboratories in science classrooms. Follow-up to the on-site workshops was facilitated with several communication technologies (Internet, E-mail, telephone, and mail). The research found E-mail was the preferred mode for follow-up to on-site workshops because of the convenience of the medium. Barriers to effective distance professional development were time constraints, equipment failure, and lack of consistent Internet access to teachers in rural and under-served areas. Teacher characteristics of the sample, teacher efficacy, technical skill, experience, and constructivist pedagogy did not appear to impact the use of communication technologies as a means of follow-up to on-site professional development workshops. However, teacher efficacy might have negatively impacted effective implementation of calculator-based laboratory technology in the classroom. The study found E-mail was the most convenient and efficient way to facilitate follow-up to on-site professional development. Teacher characteristics (efficacy, technical skill, experience, and constructivist pedagogy) did not appear to impact the use of E-mail to facilitate

  4. THE RETRIEVAL KNOWLEDGE CENTER EVALUATION OF LOW TANK LEVEL MIXING TECHNOLOGIES FOR DOE HIGH LEVEL WASTE TANK RETRIEVAL 10516

    Energy Technology Data Exchange (ETDEWEB)

    Fellinger, A.

    2009-12-08

    The Department of Energy (DOE) Complex has over two-hundred underground storage tanks containing over 80-million gallons of legacy waste from the production of nuclear weapons. The majority of the waste is located at four major sites across the nation and is planned for treatment over a period of almost forty years. The DOE Office of Technology Innovation & Development within the Office of Environmental Management (DOE-EM) sponsors technology research and development programs to support processing advancements and technology maturation designed to improve the costs and schedule for disposal of the waste and closure of the tanks. Within the waste processing focus area are numerous technical initiatives which included the development of a suite of waste removal technologies to address the need for proven equipment and techniques to remove high level radioactive wastes from the waste tanks that are now over fifty years old. In an effort to enhance the efficiency of waste retrieval operations, the DOE-EM Office of Technology Innovation & Development funded an effort to improve communications and information sharing between the DOE's major waste tank locations as it relates to retrieval. The task, dubbed the Retrieval Knowledge Center (RKC) was co-lead by the Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL) with core team members representing the Oak Ridge and Idaho sites, as well as, site contractors responsible for waste tank operations. One of the greatest challenges to the processing and closure of many of the tanks is complete removal of all tank contents. Sizeable challenges exist for retrieving waste from High Level Waste (HLW) tanks; with complications that are not normally found with tank retrieval in commercial applications. Technologies currently in use for waste retrieval are generally adequate for bulk removal; however, removal of tank heels, the materials settled in the bottom of the tank, using the same

  5. Technologies and decision support systems to aid solid-waste management: a systematic review.

    Science.gov (United States)

    Vitorino de Souza Melaré, Angelina; Montenegro González, Sahudy; Faceli, Katti; Casadei, Vitor

    2017-01-01

    Population growth associated with population migration to urban areas and industrial development have led to a consumption relation that results in environmental, social, and economic problems. With respect to the environment, a critical concern is the lack of control and the inadequate management of the solid waste generated in urban centers. Among the challenges are proper waste-collection management, treatment, and disposal, with an emphasis on sustainable management. This paper presents a systematic review on scientific publications concerning decision support systems applied to Solid Waste Management (SWM) using ICTs and OR in the period of 2010-2013. A statistical analysis of the eighty-seven most relevant publications is presented, encompassing the ICTs and OR methods adopted in SWM, the processes of solid-waste management where they were adopted, and which countries are investigating solutions for the management of solid waste. A detailed discussion on how the ICTs and OR methods have been combined in the solutions was also presented. The analysis and discussion provided aims to help researchers and managers to gather insights on technologies/methods suitable the SWM challenges they have at hand, and on gaps that can be explored regarding technologies/methods that could be useful as well as the processes in SWM that currently do not benefit from using ICTs and OR methods. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Hemocompatibility of Axial Versus Centrifugal Pump Technology in Mechanical Circulatory Support Devices.

    Science.gov (United States)

    Schibilsky, David; Lenglinger, Matthias; Avci-Adali, Meltem; Haller, Christoph; Walker, Tobias; Wendel, Hans Peter; Schlensak, Christian

    2015-08-01

    The hemocompatible properties of rotary blood pumps commonly used in mechanical circulatory support (MCS) are widely unknown regarding specific biocompatibility profiles of different pump technologies. Therefore, we analyzed the hemocompatibility indicating markers of an axial flow and a magnetically levitated centrifugal device within an in vitro mock loop. The HeartMate II (HM II; n = 3) device and a CentriMag (CM; n = 3) adult pump were investigated in a human whole blood mock loop for 360 min using the MCS devices as a driving component. Blood samples were analyzed by enzyme-linked immunosorbent assay for markers of coagulation, complement system, and inflammatory response. There was a time-dependent activation of the coagulation (thrombin-antithrombin complexes [TAT]), complement (SC5b-9), and inflammation system (polymorphonuclear [PMN] elastase) in both groups. The mean value of TAT (CM: 4.0 μg/L vs. 29.4 μg/L, P centrifugal CM device showed significantly lower activation of coagulation and inflammation than that of the HM II axial flow pump. Both HM II and CM have demonstrated an acceptable hemocompatibility profile in patients. However, there is a great opportunity to gain a clinical benefit by developing techniques to lower the blood surface interaction within both pump technologies and a magnetically levitated centrifugal pump design might be superior. Copyright © 2015 International Center for Artificial Organs and Transplantation and Wiley Periodicals Inc.

  7. An Examination of the Determinants of Top Management Support of Information Technology Projects

    Science.gov (United States)

    Mahoney, Michael L.

    2011-01-01

    Despite compelling evidence that top management support promotes information technology project success, existing research fails to offer insight into the antecedents of top management support of such projects. This gap in the literature is significant since the exploitation of information technology offers organizations unique opportunities for…

  8. The behavioral outcomes of a technology-supported leisure activity in people with dementia

    NARCIS (Netherlands)

    J.E.W.C. Gemert-Pijnen; N. Nijhof; Joost van Hoof; H. van Rijn

    2013-01-01

    BACKGROUND: This paper presents the results of an evaluation of a technology-supported leisure game for people with dementia in relation to the stimulation of social behavior. OBJECTIVE: In this study we explore the additional impact of technology-supported leisure activities on behavioral outcomes

  9. A Meta-Analysis of Effectiveness Studies on Computer Technology-Supported Language Learning

    Science.gov (United States)

    Grgurovic, Maja; Chapelle, Carol A.; Shelley, Mack C.

    2013-01-01

    With the aim of summarizing years of research comparing pedagogies for second/foreign language teaching supported with computer technology and pedagogy not-supported by computer technology, a meta-analysis was conducted of empirical research investigating language outcomes. Thirty-seven studies yielding 52 effect sizes were included, following a…

  10. Socio-Pedagogical Complex as a Pedagogical Support Technology of Students' Social Adaptation

    Science.gov (United States)

    Sadovaya, Victoriya V.; Simonova, Galina I.

    2016-01-01

    The relevance of the problem stated in the article is determined by the need of developing technological approaches to pedagogical support of students' social adaptation. The purpose of this paper is to position the technological sequence of pedagogical support of students' social adaptation in the activities of the socio-pedagogical complex. The…

  11. A CONCEPT OF SOFTWARE SUPPORT OF LEARNING PROGRAMMING LANGUAGE AND TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    V. Kruglyk

    2013-03-01

    Full Text Available A concept of software support of learning programming language and technologies is regarded in the article. Present systems of independent study of subjects, related to programming, are examined. Necessary components of a system of support learning programming languages and technologies, which is oriented on independent study, are considered.

  12. Geospatial Technology Support in Small Academic Libraries: Time to Jump on Board?

    Science.gov (United States)

    Macfarlane, Carrie M.; Rodgers, Christopher M.

    2008-01-01

    Many librarians at small academic institutions have been wondering if they can, or even should, support the use of geospatial technology on their campuses. At the Middlebury College Libraries, we have developed a model of support for geospatial technology which we think might be versatile and transferable enough to try elsewhere.

  13. DJINNI: A novel technology supported exposure therapy paradigm for SAD combining virtual reality and augmented reality

    NARCIS (Netherlands)

    Ben-Moussa, M.; Rubo, M.; Debracque, C.; Lange, W.G.

    2017-01-01

    The present paper explores the benefits and the capabilities of various emerging state-of-the-art interactive 3D and Internet of Things (IoT) technologies and investigates how these technologies can be exploited to develop a more effective technology supported exposure therapy solution for Social

  14. Joint Coordinating Committee on environmental restoration and waste management (JCCEM) support, technology transfer, and special projects

    International Nuclear Information System (INIS)

    Edgar, D.E.

    1993-01-01

    Argonne National Laboratory (ANL) assisted in identifying and evaluating foreign technologies to meet EM needs; supported the evaluation, removal, and/or revision of barriers to international technology and information transfer/exchange; facilitated the integration and coordination of U.S. government international environmental restoration and waste management activities; and enhanced U.S. industry's competitiveness in the international environmental technology market

  15. How Undergraduate Students Use Social Media Technologies to Support Group Project Work

    Science.gov (United States)

    McAliney, Peter J.

    2013-01-01

    Technology continues to evolve and become accessible to students in higher education. Concurrently, teamwork has become an important skill in academia and the workplace and students have adopted established technologies to support their learning in both individual and team project work. Given the emergence of social media technologies, I examined…

  16. Technology Staff-Development and Support Programs: Applying Abraham Maslow's Hierarchy of Needs.

    Science.gov (United States)

    Bailey, Gerald D.; Pownell, David

    1998-01-01

    Presents Abraham Maslow's hierarchy of needs (physiological, safety, belonging, esteem, self-actualization) as a model for developing technology training and support for teachers, identifies basic technology-related needs that must be met before higher levels of technology integration can be achieved, and offers seven implications to help…

  17. integrated aerospace technologies in support of precision agriculture

    International Nuclear Information System (INIS)

    Borfecchia, Flavio; De Cecco, Luigi; Martini, Sandro

    2015-01-01

    In a scenario where agriculture plays a role increasingly important and strategic, dissemination, in this field, these space technologies and advanced robotic, more and more accessible, responds We need to base decisions on information integrated, not only to increase the production, but also to ensure quality food to the people World, minimizing environmental impacts and climate, and enhancing biodiversity. In this context, applications based on these technologies are proving increasingly central role in tackling the challenges of productivity increase in agriculture required by the global market, with a view Environmental sustainability also focused on diffusion of green economy and circular, in which refer some of the experimental applications and on April conducted in ENEA. [it

  18. Separations technology development to support accelerator-driven transmutation concepts

    International Nuclear Information System (INIS)

    Venneri, F.; Arthur, E.; Bowman, C.

    1996-01-01

    This is the final report of a one-year Laboratory-Directed Research and Development (LDRD) Project at the Los Alamos National Laboratory (LANL). This project investigated separations technology development needed for accelerator-driven transmutation technology (ADTT) concepts, particularly those associated with plutonium disposition (accelerator-based conversion, ABC) and high-level radioactive waste transmutation (accelerator transmutation of waste, ATW). Specific focus areas included separations needed for preparation of feeds to ABC and ATW systems, for example from spent reactor fuel sources, those required within an ABC/ATW system for material recycle and recovery of key long-lived radionuclides for further transmutation, and those required for reuse and cleanup of molten fluoride salts. The project also featured beginning experimental development in areas associated with a small molten-salt test loop and exploratory centrifugal separations systems

  19. Access, Use, and Preferences for Technology-Based Perinatal and Breastfeeding Support Among Childbearing Women.

    Science.gov (United States)

    Demirci, Jill Radtke; Cohen, Susan M; Parker, Maris; Holmes, Ashleigh; Bogen, Debra L

    2016-01-01

    We surveyed 146 postpartum women who birthed at 34-37 6/7 weeks of gestation and intended to breastfeed about their use of and preferences regarding technology to obtain perinatal and breastfeeding support. Most participants owned smartphones and used technology during pregnancy to track pregnancy data, follow fetal development, address pregnancy concerns, and obtain breastfeeding information. Internet, e-mail, apps, and multiplatform resources were the most popular technologies used and preferred. Demographic differences existed in mobile technology access and preferences for different technologies. In terms of technology-based breastfeeding support, women wanted encouragement, anticipatory guidance, and information about milk production. A nuanced understanding of the technology childbearing women use and desire has the potential to impact clinical care and inform perinatal support interventions.

  20. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Deok Ku; Kim, Kyoung Pyo; Ko, Young Chel (and others)

    2006-12-15

    Establish strategies of international cooperation in an effect to promote our nation's leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. Using the INIS output data, it has provided domestic users with searching. Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing.