A Case Study of Technology Choices by High School Students

Science.gov (United States)

Owens-Hartman, Amy R.

2015-01-01

The purpose of this case study was to examine student technology choices when given the freedom to choose technology devices to complete a project-based learning activity in a content area of study. The study also analyzed factors affecting technology choice as well as how technology proficiency scores aligned to technology choices. Patterns and…

Propulsion Study for Small Transport Aircraft Technology (STAT)

Science.gov (United States)

Gill, J. C.; Earle, R. V.; Staton, D. V.; Stolp, P. C.; Huelster, D. S.; Zolezzi, B. A.

1980-01-01

Propulsion requirements were determined for 0.5 and 0.7 Mach aircraft. Sensitivity studies were conducted on both these aircraft to determine parametrically the influence of propulsion characteristics on aircraft size and direct operating cost (DOC). Candidate technology elements and design features were identified and parametric studies conducted to select the STAT advanced engine cycle. Trade off studies were conducted to determine those advanced technologies and design features that would offer a reduction in DOC for operation of the STAT engines. These features were incorporated in the two STAT engines. A benefit assessment was conducted comparing the STAT engines to current technology engines of the same power and to 1985 derivatives of the current technology engines. Research and development programs were recommended as part of an overall technology development plan to ensure that full commercial development of the STAT engines could be initiated in 1988.

A study on the nuclear technology policy

International Nuclear Information System (INIS)

Yang, M. H.; Kim, H. J.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, Ik

2002-01-01

This study was carried out as a part of institutional activities of KAERI. This study suggested the effective and systematic alternatives for the development of domestic industry through nuclear long-term R and D program while timely responding to the environmental change in local and global sense. First of all, this study investigated the current status and prospect of nuclear power supply, the global technological change of nuclear fuel cycle, the nuclear policy changes of major countries and the role of nuclear energy in East Asian countries. Second, some policy alternatives are suggested in association with the role of national R and D in enhancing industrial competitiveness, the effective management of nuclear long-term R and D program to facilitate technological innovation and the way to enlarge the utilization of nuclear R and D results and radiation technology

Tokamak Engineering Technology Facility scoping study

Energy Technology Data Exchange (ETDEWEB)

Stacey, W.M. Jr.; Abdou, M.A.; Bolta, C.C.

1976-03-01

A scoping study for a Tokamak Engineering Technology Facility (TETF) is presented. The TETF is a tokamak with R = 3 m and I/sub p/ = 1.4 MA based on the counterstreaming-ion torus mode of operation. The primary purpose of TETF is to demonstrate fusion technologies for the Experimental Power Reactor (EPR), but it will also serve as an engineering and radiation test facility. TETF has several technological systems (e.g., superconducting toroidal-field coil, tritium fuel cycle, impurity control, first wall) that are prototypical of EPR.

Tokamak Engineering Technology Facility scoping study

International Nuclear Information System (INIS)

Stacey, W.M. Jr.; Abdou, M.A.; Bolta, C.C.

1976-03-01

A scoping study for a Tokamak Engineering Technology Facility (TETF) is presented. The TETF is a tokamak with R = 3 m and I/sub p/ = 1.4 MA based on the counterstreaming-ion torus mode of operation. The primary purpose of TETF is to demonstrate fusion technologies for the Experimental Power Reactor (EPR), but it will also serve as an engineering and radiation test facility. TETF has several technological systems (e.g., superconducting toroidal-field coil, tritium fuel cycle, impurity control, first wall) that are prototypical of EPR

Technology-Enhanced Mathematics Education for Creative Engineering Studies

DEFF Research Database (Denmark)

Triantafyllou, Eva; Timcenko, Olga

2014-01-01

This project explores the opportunities and challenges of integrating digital technologies in mathematics education in creative engineering studies. Students in such studies lack motivation and do not perceive the mathematics the same way as mathematics students do. Digital technologies offer new...... are conceptualized. Then, we are going to apply this field data in designing learning technologies, which will be introduced in university classrooms. The effect of this introduction will be evaluated through educational design experiments....

Mapping Translation Technology Research in Translation Studies

DEFF Research Database (Denmark)

Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

2017-01-01

/Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...... section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation...... technology research as a subdiscipline of TS, and we define and discuss some basic concepts and models of the field that we use in the rest of the paper. Based on a small-scale study of papers published in TS journals between 2006 and 2016, Section 3 attempts to map relevant developments of translation...

Technology geography: studying the relationships between technology, location and productivity

NARCIS (Netherlands)

Steenhuis, H.J.; de Bruijn, E.J.

2006-01-01

Operations management, international management, public policy and economic geography are scientific areas which come together in the study of international technology transfer. This study shows how each of these areas has its own central issues but also has specific parts that are relevant for

Study of Membrane Reflector Technology

Science.gov (United States)

Knapp, K.; Hedgepeth, J.

1979-01-01

Very large reflective surfaces are required by future spacecraft for such purposes as solar energy collection, antenna surfaces, thermal control, attitude and orbit control with solar pressure, and solar sailing. The performance benefits in large membrane reflector systems, which may be derived from an advancement of this film and related structures technology, are identified and qualified. The results of the study are reported and summarized. Detailed technical discussions of various aspects of the study are included in several separate technical notes which are referenced.

Advanced Technology Subsonic Transport Study: N+3 Technologies and Design Concepts

Science.gov (United States)

Raymer, Daniel P.; Wilson, Jack; Perkins, H. Douglas; Rizzi, Arthur; Zhang, Mengmeng; RamirezPuentes, Alfredo

2011-01-01

Conceptual Research Corporation, the Science of the Possible, has completed a two-year study of concepts and technologies for future airliners in the 180-passenger class. This NASA-funded contract was primarily focused on the ambitious goal of a 70 percent reduction in fuel consumption versus the market-dominating Boeing 737-800. The study is related to the N+3 contracts awarded in 2008 by NASA s Aeronautics Research Mission Directorate to teams led by Boeing, GE Aviation, MIT, and Northrop Grumman, but with more modest goals and funding. CRC s contract featured a predominant emphasis on propulsion and fuel consumption, but since fuel consumption depends upon air vehicle design as much as on propulsion technology, the study included notional vehicle design, analysis, and parametric studies. Other NASA goals including NOx and noise reduction are of long-standing interest but were not highlighted in this study, other than their inclusion in the propulsion system provided to CRC by NASA. The B-737-800 was used as a benchmark, parametric tool, and design point of departure. It was modeled in the RDS-Professional aircraft design software then subjected to extensive parametric variations of parasitic drag, drag-due-to-lift, specific fuel consumption, and unsized empty weight. These studies indicated that the goal of a 70 percent reduction in fuel consumption could be attained with roughly a 30 percent improvement in all four parameters. The results were then fit to a Response Surface and coded for ease of use in subsequent trade studies. Potential technologies to obtain such savings were identified and discussed. More than 16 advanced concept designs were then prepared, attempting to investigate almost every possible emerging concept for application to this class airliner. A preliminary assessment of these concepts was done based on their total wetted area after design normalization of trimmed maximum lift. This assessment points towards a Tailless Airliner concept which

Educational Potential of Case-Study Technology

OpenAIRE

Fedorinova, Zoya; Vorobeva, Victoria; Malyanova, Marina

2015-01-01

This article presents the results of phenomenological and typological analysis of case-study technology educational potential. The definition “educational potential of case-study technology” is given, the main characteristics of which are changed in communication and collaborative activity quality, appearance of educational initiatives, change of participants’ position in learning process, formation of “collective subject” in collaborative activity, increase of learning (subject) results. Dep...

Egyptian Children's Use of Technology: A Phenomenological Study

Science.gov (United States)

Morgan, Hani; Lee, Guang-Lea

2017-01-01

Although the use of technology can be very important for children younger than age 12 years, not all countries possess the financial resources to make digital resources widely available to students. Children can also use technology inappropriately. This study explores the consequences of exposure to different forms of technology on children. It…

Study habits and technology use in Italian university students.

Science.gov (United States)

Poscia, Andrea; Frisicale, Emanuela Maria; Parente, Paolo; de Waure, Chiara; La Milia, Daniele Ignazio; Di Pietro, Maria Luisa

2015-01-01

Students' ability of learning is influenced by study habits. Among these, the use of technologies has assumed a controversial role. The aim of this paper is to analyse studying approach, the use of technologies and how they affect study habits in a population of university students addressed by the "Sportello Salute Giovani" ("Youth Health Information Desk") questionnaire. 16 questions referred to the approach to studying and the use of technologies (number 77-93) were analyzed. Absolute and relative frequencies were calculated. Stratification for sex, age and socio-economic status were performed and Chi square test was used to test the difference between sex, age class and socio-economic groups. 99.7% of students declared to have at least one mobile phone and 68.7% to use smartphones, i-phones and i-pads. Males (20.9% vs 14.9% female, p students (31.7% among 25-30 years old students vs 21.3% among 18-21 years old, p students with the highest socio-economic level (87.8% vs 54.2% of the lowest) seem more likely to use digital technologies/Internet for educational purposes. Our survey revealed that most college students still prefer approach the study using books instead of digital tools, but this attitude is conflicting with how many hours they use computers and surf Internet per weeks. Therefore, further studies are needed to understand better technology influence on study habits and its implication on health.

Technology spin-offs generation – a multicase study

Directory of Open Access Journals (Sweden)

Jonas Mendes Constante

2014-05-01

Full Text Available The objective of this study is to understand how small businesses can innovate through the generation of technological spin-offs, identifying motivations, influences and barriers to achieving this phenomenon. Through a qualitative and exploratory study, we analyzed four cases of technological spin-offs in Santa Catarina State. We collected data through field observations, historical data and semi-structured interviews. The main reasons found for spin-offs creation were: diversification and to complement the value chain of the parent company and to ensure greater focus for a specific technology. The main barrier was lack of capital. Government initiatives to support the creation of new businesses, coupled with the organizational culture open to entrepreneurship and investment in R&D, contributed to the development of spin-offs analyzed. This work contributes to the understanding that small and medium-sized technology-based companies are a source of technological spin-offs and can benefit from the occurrence of this process.

Technology and the study of wildfire: Middle school students study the impacts of wildfire

Science.gov (United States)

Fox-Gliessman, D.; Kerski, J.J.

2005-01-01

Various technologies that can assist students in exploring the human and environmental impacts of wildfire and in communicating their findings are discussed. Wildfires occur in many parts of the world, and provide an excellent opportunity for students to study local and global interdisciplinary issues using technology. Prior to the beginning of the field study, students take instructions in both their math and science classes about the distinction and appropriate uses of quantitative and qualitative data. Use of computer programs such as Excel spreadsheets which can contain data, and interaction of research and technology group with students, can help them collect best of the information and in making an accurate report.

Cost effectiveness studies of environmental technologies: Volume 1

International Nuclear Information System (INIS)

Silva, E.M.; Booth, S.R.

1994-02-01

This paper examines cost effectiveness studies of environmental technologies including the following: (1) In Situ Air Stripping, (2) Surface Towed Ordinance Locator System, (3) Ditch Witch Horizontal Boring Technology, (4) Direct Sampling Ion Trap Mass Spectrometer, (5) In Situ Vitrification, (6) Site Characterization and Analysis Penetrometer System, (7) In Situ Bioremediation, and (8) SEAMIST Membrane System Technology

Networking and Information Technology Workforce Study: Final Report

Data.gov (United States)

Networking and Information Technology Research and Development, Executive Office of the President — This report presents the results of a study of the global Networking and Information Technology NIT workforce undertaken for the Networking and Information...

New information technologies in social studies: postnonclassical paradigm

Directory of Open Access Journals (Sweden)

Galina Ya. Menshikova

2015-09-01

Full Text Available The paper discusses topical issues of virtual reality technologies in social research, particularly when studying the processes of ethnic cultural identity, development of ethnic and racial attitudes using «virtual avatars» for managing ethnic conflicts, development of communication skills in representatives of different cultures using virtual collaboration and video conferencing. One of the key issues of the paper to discuss the necessity of post-non-classical paradigm as a conceptual framework for social research. Contemporary social studies require developing new methods, technologies and techniques at all levels of the research: from task setting to the development of new methods and result analysis. One of the most promising methods rapidly developed in recent years is virtual reality technology. The paper presents the analysis of more than 40 experimental studies performed using CAVE and HMD virtual reality systems. Their application is considered hereunder for the studies of verbal and nonverbal cues in communication, social skills training, treatment of social anxiety disorders and the development of new methods of cognitive behavioural therapy. Studies on interpersonal communication with virtual partners (i.e. «avatars» are considered. Factors affecting the communication quality of avatars, its visual and behavioural realism, problems of seeing virtual human as real partners for social interaction are discussed. Special attention is paid to the studies of racial and ethnic attitudes performed using virtual reality systems. The possibilities of practical applications of the VR technologies for shaping positive attitudes and development of communication skills in a sociocultural context are emphasized.

Study habits and technology use in Italian university students

Directory of Open Access Journals (Sweden)

Andrea Poscia

2015-06-01

Full Text Available BACKGROUND: Students' ability of learning is influenced by study habits. Among these, the use of technologies has assumed a controversial role. The aim of this paper is to analyse studying approach, the use of technologies and how they affect study habits in a population of university students addressed by the "Sportello Salute Giovani" ("Youth Health Information Desk" questionnaire. METHODS: 16 questions referred to the approach to studying and the use of technologies (number 77-93 were analyzed. Absolute and relative frequencies were calculated. Stratification for sex, age and socio-economic status were performed and Chi square test was used to test the difference between sex, age class and socio-economic groups. RESULTS: 99.7% of students declared to have at least one mobile phone and 68.7% to use smartphones, i-phones and i-pads. Males (20.9% vs 14.9% female, p < 0.05, older students (31.7% among 25-30 years old students vs 21.3% among 18-21 years old, p < 0.05 and students with the highest socio-economic level (87.8% vs 54.2% of the lowest seem more likely to use digital technologies/Internet for educational purposes. CONCLUSION: Our survey revealed that most college students still prefer approach the study using books instead of digital tools, but this attitude is conflicting with how many hours they use computers and surf Internet per weeks. Therefore, further studies are needed to understand better technology influence on study habits and its implication on health.

Mapping Translation Technology Research in Translation Studies

DEFF Research Database (Denmark)

Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

2017-01-01

section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation......Due to the growing uptake of translation technology in the language industry and its documented impact on the translation profession, translation students and scholars need in-depth and empirically founded knowledge of the nature and influences of translation technology (e.g. Christensen....../Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...

Application study of nuclear technologies for integration chemical, biological and radiological technology

Energy Technology Data Exchange (ETDEWEB)

Shin, Jae Kon; Han, M. H.; Kim, Y. H.; Yang, J. E.; Jung, K. S.; Cha, H. K.; Moon, J.; La, K. H

2001-02-01

The projects are suggested the method to maximize the technology and research results which are being carried out by KAERI on the nuclear field. The study presents 1)the technology to rapidly and accurately determine and the nature of contamination, 2) the technology to predict the spread of contaminant and the magnitude of damage, and 3) the expert-aided decision making technology to identify the optimum counter-measures. And the solutions are also suggested the application to military technology in Chemical, Biological and Radiation field. In addition, I hope this kind of cooperation model come to be the good case of military civilian research harmony to improve the national competition capability.

Study on commercial FBR concepts by combining innovative technologies

International Nuclear Information System (INIS)

Miura, M.; Inagaki, T.; Kuroha, M.; Hida, T.

1992-01-01

A study was conducted on future prospects of FBR commercialization. Targets of further improving safety and economy were set to make commercial power plants that would be superior to future LWRs. Promising innovative technologies studied domestically and overseas were extracted by evaluating prospects for commercialization, effect, and plant applicability. Several commercial plants were conceptualized by introducing such technology to large-scale and oxide-fuel reactors. Estimates of construction cost, etc., proved that the targets could be achieved. A concept of long-term technological development was synthesized. (author)

Selling Technology in Technical Advertisements: A Case Study.

Science.gov (United States)

Guthrie, James R.

1995-01-01

Argues that, as the category of "technical products" has expanded and the public's enthusiasm for such products has lessened, marketing writers have begun to reconsider their approaches to technology in ads. Studies two technical ads in detail, and compares the ways in which they portray technology. (SR)

Technological innovation in neurosurgery: a quantitative study.

Science.gov (United States)

Marcus, Hani J; Hughes-Hallett, Archie; Kwasnicki, Richard M; Darzi, Ara; Yang, Guang-Zhong; Nandi, Dipankar

2015-07-01

Technological innovation within health care may be defined as the introduction of a new technology that initiates a change in clinical practice. Neurosurgery is a particularly technology-intensive surgical discipline, and new technologies have preceded many of the major advances in operative neurosurgical techniques. The aim of the present study was to quantitatively evaluate technological innovation in neurosurgery using patents and peer-reviewed publications as metrics of technology development and clinical translation, respectively. The authors searched a patent database for articles published between 1960 and 2010 using the Boolean search term "neurosurgeon OR neurosurgical OR neurosurgery." The top 50 performing patent codes were then grouped into technology clusters. Patent and publication growth curves were then generated for these technology clusters. A top-performing technology cluster was then selected as an exemplar for a more detailed analysis of individual patents. In all, 11,672 patents and 208,203 publications related to neurosurgery were identified. The top-performing technology clusters during these 50 years were image-guidance devices, clinical neurophysiology devices, neuromodulation devices, operating microscopes, and endoscopes. In relation to image-guidance and neuromodulation devices, the authors found a highly correlated rapid rise in the numbers of patents and publications, which suggests that these are areas of technology expansion. An in-depth analysis of neuromodulation-device patents revealed that the majority of well-performing patents were related to deep brain stimulation. Patent and publication data may be used to quantitatively evaluate technological innovation in neurosurgery.

Foresight Study on Advanced Conversion Technologies of Fossil Fuels

International Nuclear Information System (INIS)

Claver, A.; Cabrera, J. A.

2000-01-01

The Observatorio de Prospectiva Tecnologica Industrial (OPTI) is a Foundation supported by the Ministry of Industry and Energy, (MINER) and has as main objective to provide a basic information and knowledge on technology evolution. This information will be accessible to the Administration and to the Companies and can be taking into account in planning and decision making of technology policies. Ciemat is member of OPTI and is the organism in charge of the actions in the Energy sector. CIEMAT has the responsibility on the realisation of the sector studies to get in three years (1998 to 2001) a foresight vision of the critical technology topics. The OPTI integrated strategic plan undertake the analysis of other seven technology sectors, with the same criteria on methodological aspects. Delphi method was used for the realization of the studies. It consisted of a survey conducted in two rounds using a questionnaire to check the experts opinion. The time frame of the studies was defined from 1999 to 2015. The study presented in this document has been performed by CIEMAT in the second stage of the OPTI activities. The main goal behind this study is to identify the advanced clean and efficient technologies for the conversion of fossil fuels to promote in our country. The questionnaire was addressed to 250 experts and the response rate was about the 37%, ratifying the final results. The spanish position and the barriers for the development of each technology has been determined and also the recommended measures to facilitate their performance in the future. This basic information is consider of main interest, taking in account the actual energetic situation with a foreseeable demand increase and fossil fuels dependence. (Author) 17 refs

Effectiveness of Subsidies in Technology Adoption: A Case Study Involving Reverse Osmosis (RO Membrane Technology

Directory of Open Access Journals (Sweden)

Nur Laili

2016-12-01

Full Text Available Adoption of new technologies is a process that involves technological learning and penetration of new products into the market. Within the process of new technologies adoption, government usually intervened by providing incentives, in order to support the technology adoption to be succeed. This paper examines the effectiveness of incentives for the sustainability of reverse osmosis (RO membrane technology adoption. The study conducted through single case study on SWRO installation in Mandangin Island, East Java, Indonesia. Results of case study indentify the existence of government incentive in the form of direct subsidies to decrease the price of clean water. Although successful in reducing the price of water, but effectiveness of the subsidy on the sustainability of SWRO is still low, which is operates only 30% in a year. Further analysis shows that these subsidies actually be counter-productive to the sustainability of SWRO installation.

DOE technology information management system database study report

Energy Technology Data Exchange (ETDEWEB)

Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

1994-11-01

To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

Information Technology Diffusion: A Comparative Case Study of Intranet Adoption

OpenAIRE

Zolla, George A., Jr.

1999-01-01

This exploratory study identifies factors that influence the adoption and diffusion of intranet technology. A comparative case study of bipolar organizations is used to identify crucial implementation factors and create an innovation adoption model. A strategic approach for the adoption and diffusion of intranet technology is then presented.

Proteomic Technologies for the Study of Osteosarcoma

Directory of Open Access Journals (Sweden)

Stephanie D. Byrum

2012-01-01

Full Text Available Osteosarcoma is the most common primary bone cancer of children and is established during stages of rapid bone growth. The disease is a consequence of immature osteoblast differentiation, which gives way to a rapidly synthesized incompletely mineralized and disorganized bone matrix. The mechanism of osteosarcoma tumorogenesis is poorly understood, and few proteomic studies have been used to interrogate the disease thus far. Accordingly, these studies have identified proteins that have been known to be associated with other malignancies, rather than being osteosarcoma specific. In this paper, we focus on the growing list of available state-of-the-art proteomic technologies and their specific application to the discovery of novel osteosarcoma diagnostic and therapeutic targets. The current signaling markers/pathways associated with primary and metastatic osteosarcoma that have been identified by early-stage proteomic technologies thus far are also described.

Technology Integration in Science Education: A Study of How Teachers Use Modern Learning Technologies in Biology Classrooms

Science.gov (United States)

Gnanakkan, Dionysius Joseph

2017-01-01

This multiple case-study investigated how high school biology teachers used modern learning technologies (probes, interactive simulations and animations, animated videos) in their classrooms and why they used the learning technologies. Another objective of the study was to assess whether the use of learning technologies alleviated misconceptions…

Dimension of Liberal Education in the Studies at a Technological University

Directory of Open Access Journals (Sweden)

Jolita Horbačauskienė

2012-06-01

Full Text Available The paper discusses the dimension of liberal education in the studies at a technological university emphasizing two aspects: socializing of studies of technical sciences and education of a professional – generalist. Liberal education in the studies at a technological university is regarded as a possibility to educate a professional with such abilities as communication skills, critical thinking, understanding of social context, professional ethics, scientific interest in professional development and motivation for further education. On the basis of the analysis of scientific literature, the paper presents theoretical model of liberal education in the studies at a technological university.

Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

Directory of Open Access Journals (Sweden)

Abdullah Konak

2016-12-01

Findings\tThe findings of the study supported that collaborative work could improve non-technology students’ acceptance of RVCLs. However, no significant effect of collaborative work on technology acceptance was observed in the case of technology students. Recommendations for Practitioners\tEducators should consider the benefits of collaborative work while introducing a new technology to students who may not have background in the technology introduced. Recommendation for Researchers In this study, student technological background was found to be a significant factor for technology acceptance; hence, it is recommended that technological background is included in TAM studies as an external factor. Future Research\tRepeating similar studies with multiple exercises with varying degrees of challenge is required for a better understanding of how collaborative work and student technological background affect technology acceptance.

Longitudinal Study: Efficacy of Online Technology Tools for Instructional Use

Science.gov (United States)

Uenking, Michael D.

2011-01-01

Studies show that the student population (secondary and post secondary) is becoming increasingly more technologically savvy. Use of the internet, computers, MP3 players, and other technologies along with online gaming has increased tremendously amongst this population such that it is creating an apparent paradigm shift in the learning modalities of these students. Instructors and facilitators of learning can no longer rely solely on traditional lecture-based lesson formals. In order to achieve student academic success and satisfaction and to increase student retention, instructors must embrace various technology tools that are available and employ them in their lessons. A longitudinal study (January 2009-June 2010) has been performed that encompasses the use of several technology tools in an instructional setting. The study provides further evidence that students not only like the tools that are being used, but prefer that these tools be used to help supplement and enhance instruction.

Institutional Support : African Technology Policy Studies - Tanzania ...

International Development Research Centre (IDRC) Digital Library (Canada)

African Technology Policy Studies - Tanzania (ATPS-Tanzania) was registered as a national nongovernmental organization in 2001. ... While resource flows to ATPS-Tanzania from ATPS headquarters in Nairobi were reliable, the organization produced a larger volume of research outputs than most other ATPS national ...

Key Health Information Technologies and Related Issues for Iran: A Qualitative Study.

Science.gov (United States)

Hemmat, Morteza; Ayatollahi, Haleh; Maleki, Mohammadreza; Saghafi, Fatemeh

2018-01-01

Planning for the future of Health Information Technology (HIT) requires applying a systematic approach when conducting foresight studies. The aim of this study was to identify key health information technologies and related issues for Iran until 2025. This was a qualitative study and the participants included experts and policy makers in the field of health information technology. In-depth semi-structured interviews were conducted and data were analyzed by using framework analysis and MAXQDA software. The findings revealed that the development of national health information network, electronic health records, patient health records, a cloud-based service center, interoperability standards, patient monitoring technologies, telehealth, mhealth, clinical decision support systems, health information technology and mhealth infrastructure were found to be the key technologies for the future. These technologies could influence the economic, organizational and individual levels. To achieve them, the economic and organizational obstacles need to be overcome. In this study, a number of key technologies and related issues were identified. This approach can help to focus on the most important technologies in the future and to priorities these technologies for better resource allocation and policy making.

AFCI Safeguards Enhancement Study: Technology Development Roadmap

Energy Technology Data Exchange (ETDEWEB)

Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

2008-12-31

The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

Examination of studies on technology-assisted collaborative learning published between 2010-2014

Directory of Open Access Journals (Sweden)

Ahmet Arnavut

2016-09-01

Full Text Available Abstract This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education. Therefore, in this study it was aimed to examine how integration of collaborative learning into technology would contribute to education or it would contribute to education or not. According to the results of the studies obtained from Science Direct database, there are many research related with technology-assisted collaborative learning. However, since all of the studies did not fulfill our search criteria for content analysis, a total number of 58 articles published between the years of 2010 and 2014 were used in this study.

Miniaturized Power Processing Unit Study: A Cubesat Electric Propulsion Technology Enabler Project

Science.gov (United States)

Ghassemieh, Shakib M.

2014-01-01

This study evaluates High Voltage Power Processing Unit (PPU) technology and driving requirements necessary to enable the Microfluidic Electric Propulsion technology research and development by NASA and university partners. This study provides an overview of the state of the art PPU technology with recommendations for technology demonstration projects and missions for NASA to pursue.

Developing technology pushed breakthroughs: an empirical study

Directory of Open Access Journals (Sweden)

Jari Sarja

2017-12-01

Full Text Available Developing a technology push product that brings real novelty to the market is difficult, risky and costly. This case study analyzes success factors defined by the literature. True industrial cases, representing Finnish ICT firms in their early phase after a successful market entry, were researched for the success factor analysis. The whole set of the previously introduced success factors were variably supported, and three new factors arose. Because the technology pushed development processes are risky with high failure rates, the validated success factors are valuable knowledge for the developments intensive firm’s management.

The study of technological prevention method of road accident ...

African Journals Online (AJOL)

The study of technological prevention method of road accident related to driver and vehicle. ... road accident prevention method based on the factors studied. The study of this paper can provide forceful data analysis support for the road traffic safety related research. Keywords: road accident; accident prevention; road safety.

Education Technology Services at Indiana University: A Case Study.

Science.gov (United States)

Bichelmeyer, B. A.; Hara, Noriko; Yi, Jessi; Dennen, Vanessa; Avers, Dale; Tzeng, Jeng-Yi

1998-01-01

This paper, based on a qualitative research study, describes the technology resources available in the Indiana University School of Education, explains the range of services provided by Education Technology Services (ETS), documents the organizational structure of ETS, and describes the key processes and culture of ETS. (Author/AEF)

A study on nuclear technology policy

International Nuclear Information System (INIS)

Yang, M. H.; Kim, H. J.; Chung, W. S.; Yun, S. W.; Kim, H. S.

2001-01-01

This study was carried out as a part of institutional activities of KAERI. Major research area are as follows; Future directions and effects for national nuclear R and D to be resulted from restructuring of electricity industry are studied. Comparative study was carried out between nuclear energy and other energy sources from the point of views of environmental effects by introducing life cycle assessment(LCA) method. Japanese trends of reestablishment of nuclear policy such as restructuring of nuclear administration system and long-term plan of development and use of nuclear energy are also investigated, and Russian nuclear development program and Germany trends for phase-out of nuclear electricity generation are also investigated. And trends of the demand and supply of energy in eastern asian countries in from the point of view of energy security and tension in the south china sea are analyzed and investigation of policy trends of Vietnam and Egypt for the development and use of nuclear energy for the promotion of nuclear cooperation with these countries are also carried out. Due to the lack of energy resources and high dependence of imported energy, higher priority should be placed on the use of localized energy supply technology such as nuclear power. In this connection, technological development should be strengthened positively in order to improve economy and safety of nuclear energy and proliferation resistance of nuclear fuel cycle and wide ranged use of radiation and radioisotopes and should be reflected in re-establishment of national comprehensive promotion plan of nuclear energy in progress

A study on nuclear technology policy

Energy Technology Data Exchange (ETDEWEB)

Yang, M H; Kim, H J; Chung, W S; Yun, S W; Kim, H S

2001-01-01

This study was carried out as a part of institutional activities of KAERI. Major research area are as follows; Future directions and effects for national nuclear R and D to be resulted from restructuring of electricity industry are studied. Comparative study was carried out between nuclear energy and other energy sources from the point of views of environmental effects by introducing life cycle assessment(LCA) method. Japanese trends of reestablishment of nuclear policy such as restructuring of nuclear administration system and long-term plan of development and use of nuclear energy are also investigated, and Russian nuclear development program and Germany trends for phase-out of nuclear electricity generation are also investigated. And trends of the demand and supply of energy in eastern asian countries in from the point of view of energy security and tension in the south china sea are analyzed and investigation of policy trends of Vietnam and Egypt for the development and use of nuclear energy for the promotion of nuclear cooperation with these countries are also carried out. Due to the lack of energy resources and high dependence of imported energy, higher priority should be placed on the use of localized energy supply technology such as nuclear power. In this connection, technological development should be strengthened positively in order to improve economy and safety of nuclear energy and proliferation resistance of nuclear fuel cycle and wide ranged use of radiation and radioisotopes and should be reflected in re-establishment of national comprehensive promotion plan of nuclear energy in progress.

Institutional dynamics and technology legitimacy - A framework and a case study on biogas technology

NARCIS (Netherlands)

Markard, Jochen; Wirth, Steffen; Truffer, Bernhard

2016-01-01

Legitimacy is central for both novel and established technologies to mobilize the resources necessary for growth and survival. A loss of legitimacy, in turn, can have detrimental effects for an industry. In this paper, we study the rise and fall of technology legitimacy of agricultural biogas in

Experimental study on ceramic membrane technology for onboard oxygen generation

OpenAIRE

Jiang Dongsheng; Bu Xueqin; Sun Bing; Lin Guiping; Zhao Hongtao; Cai Yan; Fang Ling

2016-01-01

The ceramic membrane oxygen generation technology has advantages of high concentration of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT) and pressure d...

Constructivism as a Theoretical Foundation for the Use of Technology in Social Studies

Science.gov (United States)

Doolittle, Peter E.; Hicks, David

2003-01-01

The National Council for the Social Studies has explicitly advocated technology integration into the social studies classroom to transform the teaching and learning of key social studies content and skills. While the call for technology integration into the social studies classroom is clear, the application of technology within the realm of social…

Technologies for the Study of Speech: Review and an Application

Science.gov (United States)

Babatsouli, Elena

2015-01-01

Technologies used for the study of speech are classified here into non-intrusive and intrusive. The paper informs on current non-intrusive technologies that are used for linguistic investigations of the speech signal, both phonological and phonetic. Providing a point of reference, the review covers existing technological advances in language…

Simulation studies for the evaluation of health information technologies

DEFF Research Database (Denmark)

Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

2012-01-01

It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... system on the appropriateness of prescriptions and drugrelated activities, including laboratory test ordering or medication changes. This article presents the results of a controlled simulation study with 50 simulation runs, including ten doctors and five simulation patients, and discusses experiences...

Elementary Teachers' Experiences with Technology Professional Development and Using Technology in the Classroom: A Case Study

Science.gov (United States)

Grizzle, Pamela Lavon

2016-01-01

In order for educators to prepare students for technology-enhanced learning educators must first be prepared. The digital divide and technology professional development are two factors impacting the depth at which technology is integrated into the classroom. The local problem addressed in this study was that the impact of technology professional…

Using interactive video technology in nursing education: a pilot study.

Science.gov (United States)

Zerr, Daria M; Pulcher, Karen L

2008-02-01

A pilot study was conducted to analyze the benefits of using interactive technology with external assessors and graduating senior nursing students during Senior Nurse Leadership Assessment Day at the University of Central Missouri. The primary aim was to determine whether videoconferencing technology would promote recruitment and retention of professional nurse external assessors without compromising student learning. Among the issues discussed are the advantages and disadvantages of using interactive videoconferencing technology in education and the influence of external assessors in nursing education. The study results indicate that interactive videoconferencing is an effective, accepted format for educational opportunities such as Senior Nurse Leadership Assessment Day, based on the lived experiences of the study participants. In addition, the results demonstrate that interactive videoconferencing does not compromise student learning or assessment by external assessors.

Study and application of construction technology of shielding concrete

International Nuclear Information System (INIS)

Wu Chongming; Ding Dexin; Chen Liangzhu; Zhao Jingfa; Li Shilong

2008-01-01

Process and techniques such as mixing,transportation and pouring have been studied. The construction technology for the shielding concrete with different densities has been summarized. The technology for the common concrete is quite different from that of shielding concrete, especially when its density is more than 4000 kg/m3. Application and practices have shown that different construction technologies shall be used for shielding concretes with different densities, and thus to ensure its uniformity and construction quality. (authors)

Innovation in concentrating solar power technologies: A study drawing on patent data

OpenAIRE

Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

2010-01-01

Better understanding the innovative process of renewable energy technologies is important for tackling climate change. Though concentrating solar power is receiving growing interest, innovation studies so far have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and solar thermal technologies. This study relies on patent data to examine international innovative activity in concentrating solar power technologies. Our uniqu...

Study of Faculty and Information Technology, 2014

Science.gov (United States)

Dahlstrom, Eden; Brooks, D. Christopher

2014-01-01

In this inaugural year of the faculty technology study, EDUCAUSE Center for Analysis and Research (ECAR) partnered with 151 college/university sites yielding responses from 17,451 faculty respondents across 13 countries. The findings are exploratory in nature, as they cover new ground to help us tell a more comprehensive story about technology…

Adoption Study Of Seed Priming Technology In Upland Rice ...

African Journals Online (AJOL)

Adoption study was carried out during 2003 cropping season on randomly selected 83 farmers out of the 300 that participated in the upland rice seed priming technology transfer between year 2000 – 2002 to determine the impact of the technology on upland rice production in five States of Nigeria, through the use of ...

A Comparative Study on Emerging Electric Vehicle Technology Assessments

Energy Technology Data Exchange (ETDEWEB)

Ford, Jonathan [Sentech, Inc.; Khowailed, Gannate [Sentech, Inc.; Blackburn, Julia [Sentech, Inc.; Sikes, Karen [Sentech, Inc.

2011-03-01

Numerous organizations have published reports in recent years that investigate the ever changing world of electric vehicle (EV) technologies and their potential effects on society. Specifically, projections have been made on greenhouse gas (GHG) emissions associated with these vehicles and how they compare to conventional vehicles or hybrid electric vehicles (HEVs). Similar projections have been made on the volumes of oil that these vehicles can displace by consuming large amounts of grid electricity instead of petroleum-based fuels. Finally, the projected rate that these new vehicle fleets will enter the market varies significantly among organizations. New ideas, technologies, and possibilities are introduced often, and projected values are likely to be refined as industry announcements continue to be made. As a result, over time, a multitude of projections for GHG emissions, oil displacement, and market penetration associated with various EV technologies has resulted in a wide range of possible future outcomes. This leaves the reader with two key questions: (1) Why does such a collective range in projected values exist in these reports? (2) What assumptions have the greatest impact on the outcomes presented in these reports? Since it is impractical for an average reader to review and interpret all the various vehicle technology reports published to date, Sentech Inc. and the Oak Ridge National Laboratory have conducted a comparative study to make these interpretations. The primary objective of this comparative study is to present a snapshot of all major projections made on GHG emissions, oil displacement, or market penetration rates of EV technologies. From the extensive data found in relevant publications, the key assumptions that drive each report's analysis are identified and 'apples-to-apples' comparisons between all major report conclusions are attempted. The general approach that was taken in this comparative study is comprised of six primary

Soutien institutionnel à African Technology Policy Studies ...

International Development Research Centre (IDRC) Digital Library (Canada)

Au départ la division tanzanienne du Réseau d'études sur la politique technologique en Afrique (African Technology Policy Studies Network), et ce, depuis 1984, ATPS-Tanzania est devenu autonome à titre d'organisation non gouvernementale en 2001. Lorsque ATPS-Tanzania recevait un financement stable du siège de ...

Study on construction technology for repository

International Nuclear Information System (INIS)

Tanai, Kenji; Iwasa, Kengo; Hasegawa, Hiroshi; Miura, Kazuhiko; Okutsu, Kazuo; Kobayashi, Masaaki

1999-11-01

For the construction of underground facilities comprising access tunnels, connecting tunnels, main tunnels and disposal tunnels, a large number of tunnels will be excavated in deep rock formations. These excavations will extend hundreds kilometers in total length. Therefore, special attention must be paid, to transporting large volume of debris, ventilation, emergency escape routes in case of accident, and other factors. In addition, special attention must also paid to potential accidents which might in underground excavations, including unstable facing phenomena (such as collapse and swelling of facing at weak layer sections), spring water flow resulting collapse of rock, gas eruption, and rock burst. While considering these factors to be emphasized during the construction of geological disposal facilities, the investigation reviewed the existing working methods on individual construction technologies of access tunnels, main tunnels, connecting tunnels, disposal tunnels, and disposal pit, based on the recognition that the present state deals with a wide range of geological environments, and conducted investigation about the construction methods for each tunnel on the basis current technologies, and described the outline of these methods. Furthermore, for the items to be particularly emphasized on site characterization and siting data such as ground pressure and spring water, the investigation reviewed the current countermeasure works, and made survey on the phenomena appeared during actual tunnel construction works and their countermeasures, and carried out a study on effectiveness of these countermeasures. This constructing of disposal site in deep geological formations is basically possible by applying, or confirming, current excavation technologies for tunnels and underground facilities. A systematic construction system combines separate technologies relating to construction, (excavation technology, tunnel support work method, etc.). Such systems can be

University-to-industry advanced technology transfer. A case study

Energy Technology Data Exchange (ETDEWEB)

Goldhor, R S; Lung, R T

1983-06-01

This case study examines the events in the transfer of an advanced technology (a text-to-speech reading machine) from the university group that developed the technology to an industrial firm seeking to exploit the innovation. After a brief history of the six-year project, the paper discusses the roles of the participants, markets, and time and cost considerations. A model of technology transfer is presented and policy implications derived from the case are discussed. Emphasis is placed on the need for matching technical competence between donor and recipient, and on the function of a transfer agent in facilitating the social process of technology transfer. 42 references, 6 figures, 4 tables.

A Study of KHNP Nuclear Power Plant Technology Level Evaluation

International Nuclear Information System (INIS)

Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han

2016-01-01

KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning

A Study of KHNP Nuclear Power Plant Technology Level Evaluation

Energy Technology Data Exchange (ETDEWEB)

Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han [KHNP, Daejeon (Korea, Republic of)

2016-05-15

KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning.

Integrating Educational Technologies into Teacher Education: A Case Study

Science.gov (United States)

Rawlins, Peter; Kehrwald, Benjamin

2014-01-01

This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

Energy and cost saving results for advanced technology systems from the Cogeneration Technology Alternatives Study (CTAS)

Science.gov (United States)

Sagerman, G. D.; Barna, G. J.; Burns, R. K.

1979-01-01

An overview of the organization and methodology of the Cogeneration Technology Alternatives Study is presented. The objectives of the study were to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the future and to assess the advantages of advanced technology systems compared to those systems commercially available today. Advanced systems studied include steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics. Steam turbines, open cycle gas turbines, combined cycles, and diesel engines were also analyzed in versions typical of today's commercially available technology to provide a base against which to measure the advanced systems. Cogeneration applications in the major energy consuming manufacturing industries were considered. Results of the study in terms of plant level energy savings, annual energy cost savings and economic attractiveness are presented for the various energy conversion systems considered.

Study on modeling technology in digital reactor system

International Nuclear Information System (INIS)

Liu Xiaoping; Luo Yuetong; Tong Lili

2004-01-01

Modeling is the kernel part of a digital reactor system. As an extensible platform for reactor conceptual design, it is very important to study modeling technology and develop some kind of tools to speed up preparation of all classical computing models. This paper introduces the background of the project and basic conception of digital reactor. MCAM is taken as an example for modeling and its related technologies used are given. It is an interface program for MCNP geometry model developed by FDS team (ASIPP and HUT), and designed to run on windows system. MCAM aims at utilizing CAD technology to facilitate creation of MCNP geometry model. There have been two ways for MCAM to utilize CAD technology: (1) Making use of user interface technology in aid of generation of MCNP geometry model; (2) Making use of existing 3D CAD model to accelerate creation of MCNP geometry model. This paper gives an overview of MCAM's major function. At last, several examples are given to demonstrate MCAM's various capabilities. (authors)

A study of advanced training technology: Emerging answers to tough questions

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

This study reports the result of an extensive nationwide review of military, private sector, and other federal agencies and organizations that are implementing a wide variety of advanced training technologies. This report classifies the general categories of advanced training technologies found and provides an overview of each, including specific types and examples. In addition, the research findings present an organizational model for training development linking overall organizational maturity to readiness to implement specific kinds of advanced training technologies. It also presents proposed methods for selecting media, describes the organizations and the data gathered, and provides a summary of implementation success at each organization. This study is organized as a set of five topics. Each topic raises a number of important questions and provides complete or emerging answers. For organizations who have made advanced training selections, this study is a resource to benchmark their success with other organizations who have made similar selections. For new or developing training organizations, this study will help plan their future technology selections by comparing their level of organizational maturity to the documented experiences of similar organizations.

International energy technology collaboration and climate change mitigation. Case study 1. Concentrating Solar Power Technologies

Energy Technology Data Exchange (ETDEWEB)

Philibert, C. [Energy and Environment Division, International Energy Agency IEA, Paris (France)

2004-07-01

international collaboration by describing the globalisation of the economy and current efforts of technology collaboration and transfer. Finally, it considers various ways to strengthen international energy technology collaboration. This paper is one of six case-studies designed in an effort to provide practical insights on the role international technology collaboration could play to achieve the objectives of the UNFCCC. They will all consider the past achievements of international technology collaboration, and the role it could play in helping to develop and disseminate new technologies in the future: what worked, what did not work and why, and what lessons might be drawn from past experiences. Most case studies consider energy technologies that could help mitigate greenhouse gas emissions. A few others consider areas not directly related to greenhouse gas emissions but where international technology collaboration has proven particularly successful in the past. This case study reviews past and current experience in international collaboration in the field of concentrating solar technologies in order to identify lessons that may be relevant for more general climate-friendly technology collaboration. It presents concentrating solar technologies in their current status, recent achievements and development prospects. It analyses the present successes and failures of different forms of international collaboration in this field, and draws lessons for further elaboration of international technology collaboration in addressing climate change.

The diffusion of medical technology, local conditions, and technology re-invention: a comparative case study on coronary stenting.

Science.gov (United States)

Hashimoto, Hideki; Noguchi, Haruko; Heidenreich, Paul; Saynina, Olga; Moreland, Abigail; Miyazaki, Shunichi; Ikeda, Shunya; Kaneko, Yoshihiro; Ikegami, Naoki

2006-12-01

Innovation of medical technology is a major driving force behind the increase in medical expenditures in developed countries. Previous studies identified that the diffusion of medical technology varied across countries according to the characteristics of regulatory policy and payment systems. Based on Roger's diffusion of innovation theory, this study purported to see how local practice norms, the evolving nature of diffusing technology, and local clinical needs in addition to differences in politico-economic systems would affect the process of innovation diffusion. Taking a case of coronary stenting, an innovative therapeutic technology in early 1990s, we provided a case study of hospital-based data between two teaching high-tech hospitals in Japan and the US for discussion. Stenting began to be widely used in both countries when complementary new technology modified its clinical efficacy, but the diffusion process still differed between the two hospitals due to (1) distinctive payment systems for hospitals and physicians, (2) practice norms in favor of percutaneous intervention rather than bypass surgery that was shaped by payment incentives and cultural attitudes, and (3) local patient's clinical characteristics that the technology had to be tailored for. The case study described the diffusion of stent technology as a dynamic process between patients, physicians, hospitals, health care systems, and technology under global and local conditions.

International technology-determined competitiveness and research and technology policy. A comparative study. Internationale technologiebestimmte Wettbewerbsfaehigkeit und Forschungs- und Technologiepolitik. Eine komparative Studie

Energy Technology Data Exchange (ETDEWEB)

Busch, R

1987-01-01

The study answers the following questions: What is international technological competition. How are the framework requirements, regarding innovation of chosen countries in Europe, Japan and the USA made available. To what extent and with which instruments are the countries under investigation prepared to engage in technological competition. Point of departure was the supposition that the international competitiveness of a country depends increasingly on the innovation capacity of its industries. Technological innovations then become a specific means of competition. It was ascertained that the technical complexity of the systems and products, the cost accumulation and the availability of qualified personnel are amongst the greatest problems of the industry of a country and, at the same time, offer starting points for a state-run research and technology policies. (orig./HSCH).

Teaching through mobile technology : a reflection from high school studies in South Africa

OpenAIRE

Jantjies, Mmaki; Joy, Mike

2017-01-01

The use of mobile technology to support teaching and learning in schools, has extended technology learning tools in schools across different socio economic divides. There have been various studies throughout the world which reflect the improvement of such technology in schools. In this chapter we reflect on a series of studies conducted in developing countries with focus on Jantjies and Joy (2012,2013,2014,2015) studies. The studies were conducted in schools with the objective of providing te...

Cogeneration technology alternatives study. Volume 1: Summary report

Science.gov (United States)

1980-01-01

Data and information in the area of advanced energy conversion systems for industrial congeneration applications in the 1985-2000 time period was studied. Six current and thirty-one advanced energy conversion systems were defined and combined with appropriate balance-of-plant equipment. Twenty-six industrial processes were selected from among the high energy consuming industries to serve as a framework for the study. Each conversion system was analyzed as a cogenerator with each industrial plant. Fuel consumption, costs, and environmental intrusion were evaluated and compared to corresponding traditional values. Various cogeneration strategies were analyzed and both topping and bottoming (using industrial by-product heat) applications were included. The advanced energy conversion technologies indicated reduced fuel consumption, costs, and emissions. Typically fuel energy savings of 10 to 25 percent were predicted compared to traditional on-site furnaces and utility electricity. With the variety of industrial requirements, each advanced technology had attractive applications. Overall, fuel cells indicated the greatest fuel energy savings and emission reductions. Gas turbines and combined cycles indicated high overall annual cost savings. Steam turbines and gas turbines produced high estimated returns. In some applications, diesels were most efficient. The advanced technologies used coal-derived fuels, or coal with advanced fluid bed combustion or on-site gasification systems.

Assimilation of enterprise technology upgrades: a factor-based study

Science.gov (United States)

Claybaugh, Craig C.; Ramamurthy, Keshavamurthy; Haseman, William D.

2017-02-01

The purpose of this study is to gain a better understanding of the differences in the propensity of firms to initiate and commit to the assimilation of an enterprise technology upgrade. A research model is proposed that examines the influences that four technological and four organisational factors have on predicting assimilation of a technology upgrade. Results show that firms with a greater propensity to assimilate the new enterprise resource planning (ERP) version have a higher assessment of relative advantage, IS technical competence, and the strategic role of IS relative to those firms with a lower propensity to assimilate a new ERP version.

US country studies program: Support for climate change studies, national plans, and technology assessments

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

This paper describes the objectives of the next phase of the U.S. Country Studies Program which was launched in support of the Framework Convention on Climate Change (FCCC). The next phases of this program aim to: assist countries in preparing Climate Change Action plans; support technology assessments and development of technology initiatives; enhance exchange of information and expertise in support of FCCC. The program offers support for these processes in the form of handbooks which have been published to aid in preparing action plans, and to provide information on methane, forestry, and energy technologies. In addition an array of training workshops have been and are scheduled to offer hands on instruction to participants, expert advice is available from trained personnel, and modeling tools are available to aid in development of action plans.

Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

Science.gov (United States)

Agnew, Donald L.; Jones, Peter A.

1989-01-01

A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

A mixed methods study of foreign language teachers implementing technology-enhanced multimedia instructio

Directory of Open Access Journals (Sweden)

Olha Ketsman

2014-08-01

Full Text Available Technology-enhanced multimedia instruction offers benefits for foreign language learners. Despite having much potential, technology itself is neither effective or nor effective, but teachers play a key role in determining its effectiveness because they are in charge of making instructional decisions and choose whether and how to use technology. This article fills a gap in the literature by reporting findings of a mixed methods study of technology- enhanced multimedia instruction in middle and high school foreign language classrooms. Convergent parallel mixed methods design was applied in this study and data was collected through quantitative survey and qualitative semi-structured interviews with teachers. Results from the study indicated a significant positive correlation between variables that contribute to the use of technology-enhanced multimedia instruction in foreign language classrooms and described effective technology-enhanced multimedia practices. The findings of the study have implications for teachers, administrators and faculty of teacher preparation programs as well as state teacher education policy makers.

Radiation processing technology for cosmetics: a report on a Canadian study

International Nuclear Information System (INIS)

Reid, B.D.; Wilson, B.K.

1993-01-01

For several years some cosmetic raw materials and finished products have been successfully treated with irradiation to control microbial growth. Basic studies have been initiated to test the successful application of irradiation to a raw material or finished product in the cosmetics industry. Acceptance of this technology by industry and by regulatory agencies, is dependent upon the correct application of the technology and documenting the results of carefully controlled studies. A short list of raw materials was selected on which the immediate test work was undertaken. It includes talc, starch, gelatin and bentonite. This will increase confidence and expertise in this technology. (author)

Technology Integration in Science Education: A Study of How Teachers Use Modern Learning Technologies in Biology Classrooms

Science.gov (United States)

Gnanakkan, Dionysius Joseph

This multiple case-study investigated how high school biology teachers used modern learning technologies (probes, interactive simulations and animations, animated videos) in their classrooms and why they used the learning technologies. Another objective of the study was to assess whether the use of learning technologies alleviated misconceptions in Biology documented by American Association for the Advancement of Science. The sample consisted of eight teachers: four rural public school teachers, two public selective enrollment school teachers, and two private school teachers. Each teacher was followed for two Units of instruction. Data collected included classroom observations, field notes, student assignments and tests, teacher interviews, and pre-and post-misconception assessments. Paired t-tests were done to analyze the pre-post test data at a significance level of 0.05 and the qualitative data was analyzed using the constant comparative method. Each case study was characterized and then a cross-case analyses was done to find common themes across the different cases. Teachers were found to use the learning technologies as a tool to supplement instruction to visualize abstract processes, collect data, and explore abstract concepts and processes. Teachers were found to situate learning, use scaffolding and questioning and make students work in collaborative groups. The genetics, photosynthesis, and evolution misconceptions were better alleviated than cellular respiration. Student work that was collected demonstrated a superficial understanding of the concepts under discussion even when they had misconceptions. The teachers used the learning technologies in their classrooms for a variety of reasons: visual illustrations, time-saving measure to collect data, best way to collect data, engaging and fun for students and the interactive nature of the visualization tools and models. The study's findings had many implications for research, professional development

Single-cell technologies to study the immune system.

Science.gov (United States)

Proserpio, Valentina; Mahata, Bidesh

2016-02-01

The immune system is composed of a variety of cells that act in a coordinated fashion to protect the organism against a multitude of different pathogens. The great variability of existing pathogens corresponds to a similar high heterogeneity of the immune cells. The study of individual immune cells, the fundamental unit of immunity, has recently transformed from a qualitative microscopic imaging to a nearly complete quantitative transcriptomic analysis. This shift has been driven by the rapid development of multiple single-cell technologies. These new advances are expected to boost the detection of less frequent cell types and transient or intermediate cell states. They will highlight the individuality of each single cell and greatly expand the resolution of current available classifications and differentiation trajectories. In this review we discuss the recent advancement and application of single-cell technologies, their limitations and future applications to study the immune system. © 2015 The Authors. Immunology Published by John Wiley & Sons Ltd.

Using the Case Study Technology in Developing the Students’ Environmental Competence

Directory of Open Access Journals (Sweden)

S. B. Ignatov

2012-01-01

Full Text Available The case study technology is considered to be an effective tool for developing the students’ environmental competence. Numerous modern interactive techniques, facilitating the competence approach, can be fitted into its framework. The essence of the case-study is defined as the teaching method of problem-solving. The technology in question makes it possible to use the so called triad of «training – education – development», and provides such teaching opportunities as streaming the students according to their interests, skills, abilities and psychological peculiarities; and, therefore, assigning the relevant and motivating individual tasks.The paper traces the history of the case-study, as well as some theoretical and methodological aspects of its implementation in teaching process; the pedagogic goals fulfilled by means of the given technology are listed along with its advantages compared to other methods. The «case-study» term, its structure and working algorithms are defined. The application examples relating to environmental education at different levels are given. 

A Study of Thermal Performance of Contemporary Technology-Rich Educational Spaces

Directory of Open Access Journals (Sweden)

Sarah Elmasry

2013-08-01

Full Text Available One of the most dominant features of a classroom space is its high occupancy, which results in high internal heat gain (approximately 5 KW. Furthermore, installation of educational technologies, such as smart boards, projectors and computers in the spaces increases potential internal heat gain. Previous studies on office buildings indicate that with the introduction of IT equipment in spaces during the last decade, cooling load demands are increasing with an associated increase in summer electrical demand. Due to the fact that educational technologies in specific correspond to pedagogical practices within the space, a lot of variations due to occupancy patterns occur. Also, thermal loads caused by educational technologies are expected to be dependent on spatial configuration, for example, position with respect to the external walls, lighting equipment, mobility of devices. This study explores the thermal impact of educational technologies in 2 typical educational spaces in a facility of higher education; the classroom and the computer lab. The results indicate that a heat gain ranging between 0.06 and 0.095 KWh/m2 is generated in the rooms when educational technologies are in use. The second phase of this study is ongoing, and investigates thermal zones within the rooms due to distribution of educational technologies. Through simulation of thermal performance of the rooms, alternative room configurations are thus recommended in response to the observed thermal zones.

Technological Studies at Thomas Edison Middle School. Grades 6-7-8.

Science.gov (United States)

Foster, Patrick N.

This technology studies curriculum for grades 6-8 is a plan for each middle school student to experience technology education for approximately 60 days (1 trimester of a 180-day school year) in each grade. Section A provides definitions; structure or content for grade-level programs with science and technology unifiers (unifying curricular…

Role of surface studies in science and technology

Energy Technology Data Exchange (ETDEWEB)

Karkhanavala, M D [Bhabha Atomic Research Centre, Bombay (India). Chemistry Div.

1977-01-01

Reactivity of solids is influenced by the surface properties such as structure, dislocations and composition. Corrosion and erosion are essentially surface phenomena. Surface studies, therefore, assume importance in prevention and minimization of corrosion and erosion. Discussion is illustrated with examples drawn from the field of nuclear power reactor technology.

Global Positioning Systems (GPS) Technology to Study Vector-Pathogen-Host Interactions

Science.gov (United States)

2016-12-01

Award Number: W81XWH-11-2-0175 TITLE: Global Positioning Systems (GPS) Technology to Study Vector-Pathogen-Host Interactions PRINCIPAL...Positioning Systems (GPS) Technology to Study Vector-Pathogen-Host Interactions 5b. GRANT NUMBER W81XWH-11-2-0175 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...genetic diversity in the population, in hospitalized children with severe dengue illness and cluster investigation of their neighborhoods, and by using

Study on Integration Treatment Technology of Waste Emulsion from Machining Processing

OpenAIRE

Xin-dong Li; Wan-fu Huang

2013-01-01

The study studied the treatment technology of high concentration emulsion wastewater in metal machining plant. By analyzing the properties of emulsion wastewater, the author used the combination process of membrane technology + Fe-C micro-electrolysis + membrane bioreactor to treat the wastewater. Through the ceramic membrane, the removal rate of CODCr can reach 95%. Fe-C micro-electrolysis treatment can improve the biodegradability of wastewater, lastly through the membrane bioreactor treatm...

Demonstrating and implementing innovative technologies: Case studies from the USDOE Office of Technology Development

International Nuclear Information System (INIS)

Brouns, T.M.; Koegler, K.J.; Mamiya, L.S.

1995-02-01

This paper describes elements of success for demonstration, evaluation, and transfer for deployment of innovative technologies for environmental restoration. They have been compiled from lessons learned through the US Department of Energy (DOE) Office of Technology Development's Volatile Organic Compounds in Arid Soil Integrated Demonstration (VOC-Arid ID). The success of the VOC-Arid ID program was determined by the rapid development demonstration, and transfer for deployment of technologies to operational sites that improve on safety, cost, and/or schedule of performance over baseline technologies. The VOC-Arid ID successfully fielded more than 25 innovative technology field demonstrations; several of the technologies demonstrated have been successfully transferred for deployment Field demonstration is a critical element in the successful transfer of innovative technologies into environmental restoration operations. The measures of success for technology demonstrations include conducting the demonstration in a safe and controlled environment and generating the appropriate information by which to evaluate the technology. However, field demonstrations alone do not guarantee successful transfer for deployment There are many key elements throughout the development and demonstration process that have a significant impact on the success of a technology. This paper presents key elements for a successful technology demonstration and transfer for deployment identified through the experiences of the VOC-Arid ID. Also, several case studies are provided as examples

Basic research for nuclear energy. y Study on the nuclear materials technology

Energy Technology Data Exchange (ETDEWEB)

Kuk, I H; Lee, H S; Jeong, Y H; Sung, K W; Han, J H; Lee, J T; Lee, H K; Kim, S J; Kang, H S; An, D H; Kim, K R; Park, S D; Han, C H; Jung, M K; Oh, Y J; Kim, K H; Kim, S H; Back, J H; Kim, C H; Lim, K S; Kim, Y Y; Na, J W; Ku, J H; Lee, D H

1996-12-01

A study on the nuclear materials technologies which are necessary to establish the base for alloy development was performed. - The feasibility study on the application of Zircaloy scrap waste for hydrogen storage - The development of metal hydride battery for energy storage system - The establishment of transmission electron microscopy database for nuclear materials - The basic technology for the development of cladding materials for high burnup - The water chemistry technology for secondary system pH control and the photocatalysis technology for decomposition and removal of organics. - Improvement of primary component integrity of PWR by Zinc injection. (author). 175 refs., 58 tabs., 262 figs.

Basic research for nuclear energy. y Study on the nuclear materials technology

International Nuclear Information System (INIS)

Kuk, I. H.; Lee, H. S.; Jeong, Y. H.; Sung, K. W.; Han, J. H.; Lee, J. T.; Lee, H. K.; Kim, S. J.; Kang, H. S.; An, D. H.; Kim, K. R.; Park, S. D.; Han, C. H.; Jung, M. K.; Oh, Y. J.; Kim, K. H.; Kim, S. H.; Back, J. H.; Kim, C. H.; Lim, K. S.; Kim, Y. Y.; Na, J. W.; Ku, J. H.; Lee, D. H.

1996-12-01

A study on the nuclear materials technologies which are necessary to establish the base for alloy development was performed. - The feasibility study on the application of Zircaloy scrap waste for hydrogen storage - The development of metal hydride battery for energy storage system - The establishment of transmission electron microscopy database for nuclear materials - The basic technology for the development of cladding materials for high burnup - The water chemistry technology for secondary system pH control and the photocatalysis technology for decomposition and removal of organics. - Improvement of primary component integrity of PWR by Zinc injection. (author). 175 refs., 58 tabs., 262 figs

Second Information Technology in Education Study: SITES 2006 Technical Report

Science.gov (United States)

Carstens, Ralph, Ed.; Pelgrum, Willem J., Ed.

2009-01-01

The International Association for the Evaluation of Educational Achievement (IEA) has been conducting comparative studies for 50 years. SITES 2006 is the fifth wave of surveys related to information and communication technology (ICT), a wave that IEA started with its Computers in Education Study (two studies with data collection in 1989 and 1992),…

Technology integration box beam failure study

Science.gov (United States)

Shuart, M. J.; Ambur, Damodar R.; Davis, D. D., Jr.; Davis, R. C.; Farley, G. L.; Lotts, C. G.; Wang, J. T.

1993-01-01

Composite structures have the potential to be cost-effective, structurally efficient primary aircraft structures. The Advanced Composites Technology (ACT) Program has the goal to develop the technology to exploit this potential for heavily loaded aircraft structures. As part of the ACT Program, Lockheed Aeronautical Systems Company completed the design and fabrication of the Technology Integration Box Beam (TIBB). The TIBB is an advanced composite prototype structure for the center wing section of the C-130 aircraft. Lockheed subjected the TIBB to downbending, upbending, torsion and combined upbending and torsion load conditions to verify the design. The TIBB failed at 83 percent of design ultimate load for the combined upbending and torsion load condition. The objective of this paper is to describe the mechanisms that led to the failure of the TIBB. The results of a comprehensive analytical and experimental study are presented. Analytical results include strain and deflection results from both a global analysis of the TIBB and a local analysis of the failure region. These analytical results are validated by experimental results from the TIBB tests. The analytical and experimental results from the TIBB tests are used to determine a sequence of events that resulted in failure of the TIBB. A potential cause of failure is high stresses in a stiffener runout region. Analytical and experimental results are also presented for a stiffener runout specimen that was used to simulate the TIBB failure mechanisms.

Feasibility study on the development of advanced LWR fuel technology

International Nuclear Information System (INIS)

Jung, Youn Ho; Sohn, D. S.; Jeong, Y. H.; Song, K. W.; Song, K. N.; Chun, T. H.; Bang, J. G.; Bae, K. K.; Kim, D. H. and others.

1997-07-01

Worldwide R and D trends related to core technology of LWR fuels and status of patents have been surveyed for the feasibility study. In addition, various fuel cycle schemes have been studied to establish the target performance parameters. For the development of cladding material, establishment of long-term research plan for alloy development and optimization of melting process and manufacturing technology were conducted. A work which could characterize the effect of sintering additives on the microstructure of UO 2 pellet has been experimentally undertaken, and major sintering variables and their ranges have been found in the sintering process of UO 2 -Gd 2 O 3 burnable absorber pellet. The analysis of state of the art technology related to flow mixing device for spacer grid and debris filtering device for bottom nozzle and the investigation of the physical phenomena related to CHF enhancement and the establishment of the data base for thermal-hydraulic performance tests has been done in this study. In addition, survey on the documents of the up-to-date PWR fuel assemblies developed by foreign vendors have been carried out to understand their R and D trends and establish the direction of R and D for these structural components. And, to set the performance target of the new fuel, to be developed, fuel burnup and economy under the extended fuel cycle length scheme were estimated. A preliminary study on the failure mechanism of CANDU fuel, key technology and advanced coating has been performed. (author). 190 refs., 31 tabs., 129 figs

Feasibility study on the development of advanced LWR fuel technology

Energy Technology Data Exchange (ETDEWEB)

Jung, Youn Ho; Sohn, D. S.; Jeong, Y. H.; Song, K. W.; Song, K. N.; Chun, T. H.; Bang, J. G.; Bae, K. K.; Kim, D. H. and others

1997-07-01

Worldwide R and D trends related to core technology of LWR fuels and status of patents have been surveyed for the feasibility study. In addition, various fuel cycle schemes have been studied to establish the target performance parameters. For the development of cladding material, establishment of long-term research plan for alloy development and optimization of melting process and manufacturing technology were conducted. A work which could characterize the effect of sintering additives on the microstructure of UO{sub 2} pellet has been experimentally undertaken, and major sintering variables and their ranges have been found in the sintering process of UO{sub 2}-Gd{sub 2}O{sub 3} burnable absorber pellet. The analysis of state of the art technology related to flow mixing device for spacer grid and debris filtering device for bottom nozzle and the investigation of the physical phenomena related to CHF enhancement and the establishment of the data base for thermal-hydraulic performance tests has been done in this study. In addition, survey on the documents of the up-to-date PWR fuel assemblies developed by foreign vendors have been carried out to understand their R and D trends and establish the direction of R and D for these structural components. And, to set the performance target of the new fuel, to be developed, fuel burnup and economy under the extended fuel cycle length scheme were estimated. A preliminary study on the failure mechanism of CANDU fuel, key technology and advanced coating has been performed. (author). 190 refs., 31 tabs., 129 figs.

Studying the Technology of Creating Cortical Electrode Instruments using the Rapid Prototyping Technology

Directory of Open Access Journals (Sweden)

Ablyaz T. R.

2017-06-01

Full Text Available This paper shows the results of studying the technology of manufacturing cortical electrode-instruments (EI with the use of indirect methods of the Rapid Prototyping technology. Functional EI prototypes were made by layered synthesis of the photopolymer material with the use of the stereolithography technology (SLA - Stereo Lithography Apparatus. The article is focused on two methods of indirect EI manufacturing. One of the EI prototypes was used for making a molded wax model for hot investment casting, followed by applying copper coating. The second prototype was used for applying copper plating to a prepared current-conductive layer. As a result of EDMing a steel workpiece, both EIs reached the desired depth, which is 1 mm. The copper plating applied to the EI preserves its integrity. Through the use of the casting technology, there is a possibility to cut the economic costs by 35%. Using a prototype with preliminarily applied conductive coating makes it possible to make geometrically-complex EIs.

STUDY OF THE USE OF EDIBLE POWDERS TOMATO SAUCE TECHNOLOGIES

Directory of Open Access Journals (Sweden)

O. Benderska

2018-04-01

Full Text Available Considered the technology for the production of edible powders from vegetable raw materials. The technology for producing powders from berries is developed to produce a high-quality product in which all ingredients of raw materials are stored in a concentrated form.The current trend in nutrition is related to the expansion of the range of functional products whose daily use contributes to the prevention of hypovitaminoses and metabolic disorders, and ultimately to the rehabilitation of the population. New, non-traditional sources of local raw materials, including plant based products, need to be explored and exploited in order to address the issue of instantiate new generation of healthy foods, and the development of technologies for obtaining functionalities. The use of fruit crops, the most source of biologically active substances, is very promising in this direction.The Department of Preservation Technology of the National University Food Technology has conducted a study to enable the use of fruit and berries for food powders. To this end, powder has been obtained from the blueberry berries of ordinary, with the establishment of its physico-chemical properties.The patterns of the influence of the blueberry powder on the functional properties of the foodstuffs were investigated in the example of tomato sauces.Analysis of the results of the studies has shown that a blueberry berry powder can be used in the production of canned and other products not only to enrich their functional ingredients but also to provide them with new technological properties. The food powders received do not contain harmful impurities, have high food value, are easily absorbed by the body, compact and long periods of time. Studies have shown that the blueberry powder is a rich source of vitamins (c acid, β-carotene, tocopherol and can be used successfully in the manufacture of tomato sauces with functional properties.

Past speculations of future health technologies: a description of technologies predicted in 15 forecasting studies published between 1986 and 2010.

Science.gov (United States)

Doos, Lucy; Packer, Claire; Ward, Derek; Simpson, Sue; Stevens, Andrew

2017-07-31

To describe and classify health technologies predicted in forecasting studies. A portrait describing health technologies predicted in 15 forecasting studies published between 1986 and 2010 that were identified in a previous systematic review. Health technologies are classified according to their type, purpose and clinical use; relating these to the original purpose and timing of the forecasting studies. All health-related technologies predicted in 15 forecasting studies identified in a previously published systematic review. Outcomes related to (1) each forecasting study including country, year, intention and forecasting methods used and (2) the predicted technologies including technology type, purpose, targeted clinical area and forecast timeframe. Of the 896 identified health-related technologies, 685 (76.5%) were health technologies with an explicit or implied health application and included in our study. Of these, 19.1% were diagnostic or imaging tests, 14.3% devices or biomaterials, 12.6% information technology systems, eHealth or mHealth and 12% drugs. The majority of the technologies were intended to treat or manage disease (38.1%) or diagnose or monitor disease (26.1%). The most frequent targeted clinical areas were infectious diseases followed by cancer, circulatory and nervous system disorders. The most frequent technology types were for: infectious diseases-prophylactic vaccines (45.8%), cancer-drugs (40%), circulatory disease-devices and biomaterials (26.3%), and diseases of the nervous system-equally devices and biomaterials (25%) and regenerative medicine (25%). The mean timeframe for forecasting was 11.6 years (range 0-33 years, median=10, SD=6.6). The forecasting timeframe significantly differed by technology type (p=0.002), the intent of the forecasting group (p<0.001) and the methods used (p<001). While description and classification of predicted health-related technologies is crucial in preparing healthcare systems for adopting new innovations

Information data systems for a global change technology initiative architecture trade study

Science.gov (United States)

Murray, Nicholas D.

1991-01-01

The Global Change Technology Initiative (GCTI) was established to develop technology which will enable use of satellite systems of Earth observations on a global scale, enable use of the observations to predictively model Earth's changes, and provide scientists, government, business, and industry with quick access to the resulting information. At LaRC, a GCTI Architecture Trade Study was undertaken to develop and evaluate the architectural implications to meet the requirements of the global change studies and the eventual implementation of a global change system. The output of the trade study are recommended technologies for the GCTI. That portion of the study concerned with the information data system is documented. The information data system for an earth global change modeling system can be very extensive and beyond affordability in terms of today's costs. Therefore, an incremental approach to gaining a system is most likely. An options approach to levels of capability versus needed technologies was developed. The primary drivers of the requirements for the information data system evaluation were the needed science products, the science measurements, the spacecraft orbits, the instruments configurations, and the spacecraft configurations and their attendant architectures. The science products requirements were not studied here; however, some consideration of the product needs were included in the evaluation results. The information data system technology items were identified from the viewpoint of the desirable overall information system characteristics.

Organizational Influences in Technology Adoption Decisions: A Case Study of Digital Libraries

Science.gov (United States)

Oguz, Fatih

2016-01-01

The purpose of this study was to understand the organizational level decision factors in technology adoption in the context of digital libraries. A qualitative case study approach was used to investigate the adoption of a specific technology, XML-based Web services, in digital libraries. Rogers' diffusion of innovations and Wenger's communities of…

Reliability studies in a developing technology

International Nuclear Information System (INIS)

Mitchell, L.A.; Osgood, C.; Radcliffe, S.J.

1975-01-01

The standard methods of reliability analysis can only be applied if valid failure statistics are available. In a developing technology the statistics which have been accumulated, over many years of conventional experience, are often rendered useless by environmental effects. Thus new data, which take account of the new environment, are required. This paper discusses the problem of optimizing the acquisition of these data when time-scales and resources are limited. It is concluded that the most fruitful strategy in assessing the reliability of mechanisms is to study the failures of individual joints whilst developing, where necessary, analytical tools to facilitate the use of these data. The approach is illustrated by examples from the field of tribology. Failures of rolling element bearings in moist, high-pressure carbon dioxide illustrate the important effects of apparently minor changes in the environment. New analytical techniques are developed from a study of friction failures in sliding joints. (author)

A Case Study of the Application of SAMR and TPACK for Reflection on Technology Integration into Two Social Studies Classrooms

Science.gov (United States)

Hilton, Jason Theodore

2016-01-01

As emerging technology continues to enter the social studies classroom, teachers need to approach integration of such technology in a systematic manner to ensure that such technology enhances the learning of their students. Currently, scholars of technology integration advocate for the use of one of two different models, either SAMR or TPACK. This…

Gas power plant with CO2 handling. A study of alternative technologies

International Nuclear Information System (INIS)

Bolland, Olav; Hagen, Roger I.; Maurstad, Ola; Tangen, Grethe; Juliussen, Olav; Svendsen, Hallvard

2002-01-01

The report documents a study which compares 12 different technologies for gas power plants with CO 2 handling. The additional costs in removing the CO 2 in connection with electricity production is calculated to at least 18-19 oere /kWh compared to conventional gas power production without CO 2 capture. The calculated extra costs are somewhat higher than previously published figures. The difference is mainly due to that the estimated costs for pipelines and injection system for CO 2 are higher than in other studies. The removal of CO 2 in connection with gas power production implies increased use of natural gas. The most developed technologies would lead to a procentual increase in the gas consumption per kWh electricity of 18-25%. Gas power plants based on the present technologies would have efficiencies in the size of 46-49%. The efficiency of power plants without CO 2 handling is supposed to be 58%. There is no foundation for pointing out a ''winner's' among the compared technologies in the study. The present available technologies excepted, there are no technology which stands out as better than the others from an economic viewpoint. Gas turbine with membrane based separation of oxygen from air (AZEP) has a potential for lower costs but implies challenging technological development and thence considerable technological risks. Two technologies, capture of carbon from natural gas previous to combustion and exhaust gas purification based on absorption, may be employed in 3 - 4 years. The other technologies require more development and maturing. Three of the technologies may be particularly interesting because hydrogen may be produced as a byproduct. Demonstration plant and choice of technology: 1) There is a limited need for demonstration plants with respect to technology development. 2) It is important for the technology development to be able to test various technologies in a laboratory or in a flexible pilot plant. 3) Many technologies and components may be

Young Adults, Technology, and Weight Loss: A Focus Group Study

OpenAIRE

Stephens, Janna; Moscou-Jackson, Gyasi; Allen, Jerilyn K.

2015-01-01

Overweight and obesity are a major concern in young adults. Technology has been integrated into many weight loss interventions; however little is known about the use of this technology in young adults. The purpose of this study was to explore through focus group sessions the opinions of young adults on the use of technology for weight loss. A total of 17 young adults, between 18 and 25 years of age, participated in three focus group sessions. Major results indicated that young adults have ver...

Technology Integration in the Schools of Guyana: A Case Study

Science.gov (United States)

MacKinnon, Gregory; MacKinnon, Paula

2010-01-01

The following study examines the implementation of learning technologies in Guyana, South America. Specifically, the study addresses the impact of using interactive radio instruction for teaching mathematics and SuccessMaker software for enhancing literacy skills. The research results were based on surveys, interviews, classroom observations, and…

Providing Appropriate Technology for Emerging Markets: Case Study on China’s Solar Thermal Industry

Directory of Open Access Journals (Sweden)

Jianghua Zhou

2017-01-01

Full Text Available Building on a case study of five Chinese solar thermal companies and one association, our study aims to understand how the innovator’s choices regarding the use of technology and organizational practices for new product development enable companies to design and diffuse appropriate technology in emerging markets. The study uncovers two critical factors that enhance the appropriateness of technology: redefining the identity of technology and building a local supply system. Our analysis shows that synergic innovation in both architecture and component leads to the appropriate functionalities desired by emerging markets. Moreover, modular design and the building of a local supply system enhance the process appropriateness of technology. Our study provides an empirical basis for advocating going beyond minor adaptations of existing products to creating appropriate technology for emerging markets, and extends our understandings of the upstream process of designing appropriate technology. Moreover, the emphasis on the local supply system reflects a holistic framework for shaping and delivering appropriate technology, expanding the existing research focus on the perspective of the technology itself. Our research also has managerial implications that may help firms tap into emerging markets.

Reactive membrane technology: Two case studies

DEFF Research Database (Denmark)

Zeuner, Birgitte; Luo, Jianquan; Pinelo, Manuel

2014-01-01

investigated the effect of applied pressure, enzyme concentration, pH, and membrane properties on fouling-induced enzyme immobilization. In another study, the production of the human milk oligosaccharide 3’-sialyllactose by an engineered sialidase from Trypanosoma rangeli (Tr6) was significantly improved......Enzymatic processes are generally sustainable processes that use mild conditions and natural substrates. Membrane technology can be employed for enzyme immobilization as well as for recycling free enzymes. Using alcohol dehydrogenase (ADH) as part of a process to recycle CO2 to methanol, we...... in an enzymatic membrane reactor. The entire process can be improved by employing a series of ultra- and nanofiltrations....

Creating Educational Technology Curricula for Advanced Studies in Learning Technology

Directory of Open Access Journals (Sweden)

Minoru Nakayama

2016-08-01

Full Text Available Curriculum design and content are key factors in the area of human resource development. To examine the possibility of using a collaboration of Human Computer Interaction (HCI and Educational Technology (ET to develop innovative improvements to the education system, the curricula of these two areas of study were lexically analyzed and compared. As a further example, the curriculum of a joint course in HCI and ET was also lexically analyzed and the contents were examined. These analyses can be used as references in the development of human resources for use in advanced learning environments.

Politicizing science: conceptions of politics in science and technology studies.

Science.gov (United States)

Brown, Mark B

2015-02-01

This essay examines five ideal-typical conceptions of politics in science and technology studies. Rather than evaluating these conceptions with reference to a single standard, the essay shows how different conceptions of politics serve distinct purposes: normative critique, two approaches to empirical description, and two views of democracy. I discuss each conception of politics with respect to how well it fulfills its apparent primary purpose, as well as its implications for the purpose of studying a key issue in contemporary democratic societies: the politicization of science. In this respect, the essay goes beyond classifying different conceptions of politics and also recommends the fifth conception as especially conducive to understanding and shaping the processes whereby science becomes a site or object of political activity. The essay also employs several analytical distinctions to help clarify the differences among conceptions of politics: between science as 'political' (adjective) and science as a site of 'politics' (noun), between spatial-conceptions and activity-conceptions of politics, between latent conflicts and actual conflicts, and between politics and power. The essay also makes the methodological argument that the politics of science and technology is best studied with concepts and methods that facilitate dialogue between actors and analysts. The main goal, however, is not to defend a particular view of politics, but to promote conversation on the conceptions of politics that animate research in social studies of science and technology.

EDUCATIONAL TECHNOLOGY IN PRACTICE Research and Practical Case Studies from the Field

Directory of Open Access Journals (Sweden)

Reviewed by Ozden SAHIN-IZMIRLI

2010-10-01

Full Text Available The book starts with an explanation of the reason why the terms found in the book are sometimes used in place of each other. The editors stated that when technological tools are used to establish an effective and productive study process in education, the concept of learning technology is used instead of educational technology. The editors of the book considers the field as complex and vague in terms of the fact that the meanings of the concepts are close to each other in the field of educational technology and that the field provides an opportunity for inter-disciplinary studies. However, according to the editors, this vagueness and complexity shows the superiority of the field. This superiority is explained with the fact that the field of educational technology requires upper-level skills of problem solving and critical thinking and that it presents a multi-dimensional and inter-disciplinary study field. The book was edited by Wanjira Kinuthia and Steward Marshall. Wanjira Kinuthia, an assistant professor at Georgia State University, works in the Department of Middle-Secondary Education and Instructional Technology. Steward Marshall, a professor at the University of the West Indies, is the director of the Distance Education Centre. The book includes five sections and 21 chapters. These sections are “Materials, Methods, and Modalities”, “Technology Implementation and Integration Issues”, “Student Engagement and Learning”, “Building Capacity”, “Using Technology for Performance Improvement and Productivity Enhancement”.

A Study on Strategy Establishment for Foreign Market Penetrating of Nuclear Technology Venture Business

Energy Technology Data Exchange (ETDEWEB)

Song, Ki Dong; Kim, S. S.; Choi, Y. D.; Park, C. S.; Bae, C. I.; Chung, J. M.; Roe, S. P

2007-05-15

The objective of this study is to suggest feasible strategy for foreign market penetration of nuclear venture technology business. Especially, this study focuses on the technology and product export to the Frankfurt-Hoechst Industrial Park in Germany. This study analyzed the operating system of German Industrial Park, especially the Frankfurt-Hoechst Industrial Park. This study also analyzed the current status of Industrial Science Parks in Northern European countries such as Finland, Sweden, and England. Then, this study suggested the strategy for nuclear technology venture business to penetrate German export market effectively.

A Study on Strategy Establishment for Foreign Market Penetrating of Nuclear Technology Venture Business

International Nuclear Information System (INIS)

Song, Ki Dong; Kim, S. S.; Choi, Y. D.; Park, C. S.; Bae, C. I.; Chung, J. M.; Roe, S. P.

2007-05-01

The objective of this study is to suggest feasible strategy for foreign market penetration of nuclear venture technology business. Especially, this study focuses on the technology and product export to the Frankfurt-Hoechst Industrial Park in Germany. This study analyzed the operating system of German Industrial Park, especially the Frankfurt-Hoechst Industrial Park. This study also analyzed the current status of Industrial Science Parks in Northern European countries such as Finland, Sweden, and England. Then, this study suggested the strategy for nuclear technology venture business to penetrate German export market effectively

The BERG faculty students readiness for information technologies study

Directory of Open Access Journals (Sweden)

Horovèák Pavel

2002-12-01

Full Text Available The contribution deals with the reconnaissance of our students’ readiness to study information technologies, its interpretation, comparison with some published data as well as with a completion and evaluation of the reconnaissance. It specifies methods and processes of evaluation, structure, sections and questions of the reconnaissance. The reconnaissance was oriented particularly to the evaluation of knowledge in the information technologies area acquired at secondary schools. It was completed in a classical paper form as a preparation for the realization and utilization of questionnaire in the electronic form. The following is constructed using modern internet and database technologies and presents extensive possibilities of evaluation answers respondents. The results of the reconnaissance are presented in the form distribution (sex, domicile, secondary school, secondary school influence, work with a computer, operating and exploitation of internet technologies, familiarity with operating systems and typical applications software and programming languages as well as the interest in information technologies of respondents. The results are compared with some other published data and future perspectives of completion and its evaluation of completion are outlined.

Smart homes, private homes? An empirical study of technology researchers? perceptions of ethical issues in developing smart-home health technologies

OpenAIRE

Birchley, Giles; Huxtable, Richard; Murtagh, Madeleine; ter Meulen, Ruud; Flach, Peter; Gooberman-Hill, Rachael

2017-01-01

Background Smart-home technologies, comprising environmental sensors, wearables and video are attracting interest in home healthcare delivery. Development of such technology is usually justified on the basis of the technology?s potential to increase the autonomy of people living with long-term conditions. Studies of the ethics of smart-homes raise concerns about privacy, consent, social isolation and equity of access. Few studies have investigated the ethical perspectives of smart-home engine...

School District Information Technology Disaster Recovery Planning: An Explanatory Case Study

Science.gov (United States)

Gray, Shaun L.

2017-01-01

Despite research and practitioner articles outlining the importance information technology disaster plans (ITDRPs) to organizational success, barriers have impeded the process of disaster preparation for Burlington County New Jersey school districts. The purpose of this explanatory qualitative case study was to understand how technology leader…

A longitudinal study on boys' and girls' career aspirations and interest in technology

Science.gov (United States)

Ardies, Jan; De Maeyer, Sven; Gijbels, David

2015-09-01

Background: More young people, boys and girls, are needed in technical studies and professions, as the relative number of students in technology-related studies has been decreasing in most industrialised countries. To overcome this decrease several countries implemented mandatory technology classes in the curriculum of secondary education. Purpose: This study has two goals: exploring the evolution of pupils' interest during the year(s) they attend the mandatory technology classes and exploring determining characteristics for differences in boys' and girls' attitude change over time. Sample: This study focuses on data gathered in the first and second grade of the first cycle in general secondary education in the North region of Belgium, Flanders. In a first stage we selected a good representation of geographically spread schools (n = 20), from which over 1300 students participated. Design and methods: A longitudinal study with eight measurement occasions spread over the course of two years is presented in order to capture the evolution of students' attitudes, making use of a multilevel growth model analysis. Results: The results show that students' interest in technology decreases over time, although at the end of each grade interest is increasing again. Boys' and girls' interest in technology also evolves a little different in the first cycle of secondary education. For career aspirations we didn't see any significant difference between boys and girls. Boys' and girls' aspirations decrease over time with a little increase by the end of the second grade. Students with a more technological curriculum also have more career aspirations in the field of technology than their peers with other curricula. Although students' perceptions about technology as a subject for boys and girls are largely stable. Conclusions: The evolution of students' attitude is far from linear, this strengthens us in the choice for a more complex analysis model and the choice for more measuring

Scoping Study of Airlift Circulation Technologies for Supplemental Mixing in Pulse Jet Mixed Vessels

Energy Technology Data Exchange (ETDEWEB)

Schonewill, Philip P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Berglin, Eric J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Boeringa, Gregory K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Buchmiller, William C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burns, Carolyn A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Minette, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-04-07

At the request of the U.S. Department of Energy Office of River Protection, Pacific Northwest National Laboratory (PNNL) conducted a scoping study to investigate supplemental technologies for supplying vertical fluid motion and enhanced mixing in Waste Treatment and Immobilization Plant (WTP) vessels designed for high solids processing. The study assumed that the pulse jet mixers adequately mix and shear the bottom portion of a vessel. Given that, the primary function of a supplemental technology should be to provide mixing and shearing in the upper region of a vessel. The objective of the study was to recommend a mixing technology and configuration that could be implemented in the 8-ft test vessel located at Mid-Columbia Engineering (MCE). Several mixing technologies, primarily airlift circulator (ALC) systems, were evaluated in the study. This technical report contains a review of ALC technologies, a description of the PNNL testing and accompanying results, and recommended features of an ALC system for further study.

Renewable energy technology portfolio planning with scenario analysis: A case study for Taiwan

International Nuclear Information System (INIS)

Chen, T.-Y.; Yu, Oliver S.; Hsu, George Jyh-yih; Hsu, Fang-Ming; Sung, W.-N.

2009-01-01

This paper presents the results of a case study of applying a systematic and proven process of technology portfolio planning with the use of scenario analysis to renewable energy developments in Taiwan. The planning process starts with decision values of technology development based on a survey of society leaders. It then generates, based on expert opinions and literature search, a set of major technology alternatives, which in this study include: wind energy, photovoltaic, bio-energy, solar thermal power, ocean energy, and geothermal energy. Through a committee of technical experts with diversified professional backgrounds, the process in this study next constructs three scenarios ('Season in the Sun', 'More Desire than Energy', and 'Castle in the Air') to encompass future uncertainties in the relationships between the technology alternatives and the decision values. Finally, through a second committee of professionals, the process assesses the importance and risks of these alternative technologies and develops a general strategic plan for the renewable energy technology portfolio that is responsive and robust for the future scenarios. The most important contributions of this paper are the clear description of the systematic process of technology portfolio planning and scenario analysis, the detailed demonstration of their application through a case study on the renewable energy development in Taiwan, and the valuable results and insights gained from the application.

Humans, Intelligent Technology, and Their Interface: A Study of Brown’s Point

Science.gov (United States)

2017-12-01

INTELLIGENT TECHNOLOGY , AND THEIR INTERFACE: A STUDY OF BROWN’S POINT by Jackie L. J. White December 2017 Thesis Advisor: Carolyn Halladay...REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE HUMANS, INTELLIGENT TECHNOLOGY , AND THEIR INTERFACE: A STUDY OF BROWN’S POINT...with the technology before and during the accident. I combined the findings from the accident investigation with various heuristics regarding the human

Planetary Science Technology Infusion Study: Findings and Recommendations Status

Science.gov (United States)

Anderson, David J.; Sandifer, Carl E., II; Sarver-Verhey, Timothy R.; Vento, Daniel M.; Zakrajsek, June F.

2014-01-01

The Planetary Science Division (PSD) within the National Aeronautics and Space Administrations (NASA) Science Mission Directorate (SMD) at NASA Headquarters sought to understand how to better realize a scientific return on spacecraft system technology investments currently being funded. In order to achieve this objective, a team at NASA Glenn Research Center was tasked with surveying the science and mission communities to collect their insight on technology infusion and additionally sought inputs from industry, universities, and other organizations involved with proposing for future PSD missions. This survey was undertaken by issuing a Request for Information (RFI) activity that requested input from the proposing community on present technology infusion efforts. The Technology Infusion Study was initiated in March 2013 with the release of the RFI request. The evaluation team compiled and assessed this input in order to provide PSD with recommendations on how to effectively infuse new spacecraft systems technologies that it develops into future competed missions enabling increased scientific discoveries, lower mission cost, or both. This team is comprised of personnel from the Radioisotope Power Systems (RPS) Program and the In-Space Propulsion Technology (ISPT) Program staff.The RFI survey covered two aspects of technology infusion: 1) General Insight, including: their assessment of barriers to technology infusion as related to infusion approach; technology readiness; information and documentation products; communication; integration considerations; interaction with technology development areas; cost-capped mission areas; risk considerations; system level impacts and implementation; and mission pull. 2) Specific technologies from the most recent PSD Announcements of Opportunities (AOs): The Advanced Stirling Radioisotope Generator (ASRG), aerocapture and aeroshell hardware technologies, the NASA Evolutionary Xenon Thruster (NEXT) ion propulsion system, and the

Developing the 21st-Century Social Studies Skills through Technology Integration

Science.gov (United States)

Farisi, Mohammad Imam

2016-01-01

Recently, technology has become an educational necessity in global-digital era. Facing these phenomena, social studies (SS) should make innovations related to changes of 21st-century skills and learning paradigm, which is characterized by the principles of disclosure of information, computing, automation, and communication. Technology integration…

Technology roadmap study on carbon capture, utilization and storage in China

International Nuclear Information System (INIS)

Zhang, Xian; Fan, Jing-Li; Wei, Yi-Ming

2013-01-01

Carbon capture, utilization and storage (CCUS) technology will likely become an important approach to reduce carbon dioxide (CO 2 ) emissions and optimize the structure of energy consumption in China in the future. In order to provide guidance and recommendations for CCUS Research, Development and Demonstration in China, a high level stakeholder workshop was held in Chongqing in June 2011 to develop a technology roadmap for the development of CCUS technology. This roadmap outlines the overall vision to provide technically viable and economically affordable technological options to combat climate change and facilitate socio-economic development in China. Based on this vision, milestone goals from 2010 to 2030 are set out in accordance with the technology development environment and current status in China. This study identifies the critical technologies in capture, transport, utilization and storage of CO 2 and proposes technical priorities in the different stages of each technical aspect by evaluating indices such as the objective contribution rate and technical maturity, and gives recommendations on deployment of full-chain CCUS demonstration projects. Policies which would support CCUS are also suggested in this study. - Highlights: • A technology roadmap for CCUS development in China from 2010 to 2030 is presented. • Sound data and analysis in combination with expert workshops are used. • Critical technologies in CCUS are identified. • Priority actions of all stages are identified and proposed. • Guidance and recommendations for CCUS RD and D are provided

Interorganizational transfer of technology - A study of adoption of NASA innovations

Science.gov (United States)

Chakrabarti, A. K.; Rubenstein, A. H.

1976-01-01

The paper describes a study on the effects of top management support, various techno-economic factors, organizational climate, and decision-making modes on the adoption of NASA innovations. Field research consisted of interviews and questionnaires directed to sixty-five organizations. Forty-five test cases where different decisions for adoption of ideas for new products or processes were made on NASA Tech Briefs were studied in relation to the effects of various factors on the degree of success of adoption, including: (1) the degree of general connection of the technology to the firm's existing operation, (2) the specificity of the relationship between the technology and some existing and recognized problem, (3) the degree of urgency of the problem to which the technology was related, (4) maturity of technology available to implement the technology, (5) availability of personnel and financial resources to implement the technology, (6) degree of top management interest, (7) the use of confrontation in joint-decision, (8) the use of smoothing in decision-making, and (9) the use of forcing in decision-making. It was found that top managements interest was important in the product cases only, and that the success of process innovations was dependent on the quality of information and the specificity of the relationship between the technology and some recognized existing problem.

Cost decreases in environmental technology. Evidence from four case studies

Energy Technology Data Exchange (ETDEWEB)

Oosterhuis, F. [Instituut for Environmental Studies, Vrije Universiteit VU, Amsterdam (Netherlands)

2007-07-15

The cost of a new technology tends to decrease as its uptake grows, and environmental technology is no exception to this general rule. Factors that can bring about such cost reductions include economies of scale, 'learning-by-doing', incremental technological improvements, and growing competition. In preparing environmental policies, the potential for future cost reductions is often disregarded. The present study aims to provide some additional empirical evidence on the cost decreases in environmental technology and the factors that lie behind them. To this end, four exemplary case studies have been selected. The first case (NOx emission abatement by Selective Catalytic Reduction (SCR)), shows a wide variety in cost estimates, without a clear trend. This is even true for the costs of a fairly homogeneous type of investment (SCR in coal fired power plants). Nevertheless, it is clear that an important cost decrease has been achieved by prolonging the lifetime of the catalyst, which is one of the main cost components in SCR. In the second case (NH3 emission abatement by chemical air scrubbers in pig farming) there is not yet sufficient experience with the technology to draw conclusions on the development of costs. However, it is already clear that economizing on the capacity of the system can contribute to important cost savings. Three-way catalytic converters in cars have shown significant price decreases following their large scale introduction on the European market in the early 1990s. Probably economies of scale have played an important role in this case, as the size of the market made mass production possible. To some extent, cost reductions may also be attributed to improvements such as the need for less materials (e.g. platinum). Furthermore, the performance of catalytic converters has improved, implying that the cost per unit of emission reduction has decreased even more than the cost of the device itself. Market prices of Compact Fluorescent Lamps

Study of Smart Campus Development Using Internet of Things Technology

Science.gov (United States)

Widya Sari, Marti; Wahyu Ciptadi, Prahenusa; Hafid Hardyanto, R.

2017-04-01

This paper describes the development of smart campus using Internet of Things (IoT) technology. Through smart campus, it is possible that a campus is connected via online by the outside entity, so that the teaching approach based on technology can be conducted in real time. This research was conducted in smart education, smart parking and smart room. Observation and literature studies were applied as the research method with the related theme for the sake of system design of smart campus. The result of this research is the design of smart campus system that includes smart education development, smart parking and smart room with the sake of Universitas PGRI Yogyakarta as the case study.

Experimental study on ceramic membrane technology for onboard oxygen generation

Directory of Open Access Journals (Sweden)

Jiang Dongsheng

2016-08-01

Full Text Available The ceramic membrane oxygen generation technology has advantages of high concentration of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT and pressure driven ceramic membrane separation oxygen generation technology (PDCMSOGT. Experiments were conducted under different temperatures, pressures of feed air and produced oxygen flow rates. On the basis of these experiments, the flow rate of feed air, electric power provided, oxygen recovery rate and concentration of produced oxygen are compared under each working condition. It is concluded that the EDCMSOGT is the oxygen generation means more suitable for onboard conditions.

Young adults, technology, and weight loss: a focus group study.

Science.gov (United States)

Stephens, Janna; Moscou-Jackson, Gyasi; Allen, Jerilyn K

2015-01-01

Overweight and obesity are a major concern in young adults. Technology has been integrated into many weight loss interventions; however little is known about the use of this technology in young adults. The purpose of this study was to explore through focus group sessions the opinions of young adults on the use of technology for weight loss. A total of 17 young adults, between 18 and 25 years of age, participated in three focus group sessions. Major results indicated that young adults have very little knowledge on the use of Smartphone technology for weight loss but would like to use this type of technology to help them lose weight. Results also indicated that young adults struggle to make healthy food choices and have priorities that outweigh exercise and they need support and guidance to make better decisions. In conclusion, young adults would be open to using Smartphone technology for weight loss but also need feedback and guidance to help make healthy decisions.

A feasibility study for a manufacturing technology deployment center

Energy Technology Data Exchange (ETDEWEB)

1994-10-31

The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

Technological aspects of hospital communication challenges: an observational study.

Science.gov (United States)

Popovici, Ilinca; Morita, Plinio P; Doran, Diane; Lapinsky, Stephen; Morra, Dante; Shier, Ashleigh; Wu, Robert; Cafazzo, Joseph A

2015-06-01

To gain insights into how technological communication tools impact effective communication among clinicians, which is critical for patient safety. This multi-site observational study analyzes inter-clinician communication and interaction with information technology, with a focus on the critical process of patient transfer from the Emergency Department to General Internal Medicine. Mount Sinai Hospital, Sunnybrook Health Sciences Centre and Toronto General Hospital. At least five ED and general internal medicine nurses and physicians directly involved in patient transfers were observed on separate occasions at each institution. N/A. N/A. The study provides insight into clinician workflow, evaluates current hospital communication systems and identifies key issues affecting communication: interruptions, issues with numeric pagers, lack of integrated communication tools, lack of awareness of consultation status, inefficiencies related to the paper chart, unintuitive user interfaces, mixed use of electronic and paper systems and lack of up-to-date contact information. It also identifies design trade-offs to be negotiated: synchronous communication vs. reducing interruptions, notification of patient status vs. reducing interruptions and speed vs. quality of handovers. The issues listed should be considered in the design of new technology for hospital communications. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Electrification Futures Study: End-Use Electric Technology Cost and Performance Projections through 2050

Energy Technology Data Exchange (ETDEWEB)

Vimmerstedt, Laura J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jadun, Paige [National Renewable Energy Lab. (NREL), Golden, CO (United States); McMillan, Colin A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Steinberg, Daniel C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Muratori, Matteo [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mai, Trieu T. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2018-01-02

This report provides projected cost and performance assumptions for electric technologies considered in the Electrification Futures Study, a detailed and comprehensive analysis of the effects of widespread electrification of end-use service demands in all major economic sectors - transportation, residential and commercial buildings, and industry - for the contiguous United States through 2050. Using extensive literature searches and expert assessment, the authors identify slow, moderate, and rapid technology advancement sensitivities on technology cost and performance, and they offer a comparative analysis of levelized cost metrics as a reference indicator of total costs. The identification and characterization of these end-use service demand technologies is fundamental to the Electrification Futures Study. This report, the larger Electrification Futures Study, and the associated data and methodologies may be useful to planners and analysts in evaluating the potential role of electrification in an uncertain future. The report could be broadly applicable for other analysts and researchers who wish to assess electrification and electric technologies.

Examination of Studies on Technology-Assisted Collaborative Learning Published between 2010-2014

Science.gov (United States)

Arnavut, Ahmet; Özdamli, Fezile

2016-01-01

This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education.…

Assisted reproductive technology has no association with autism spectrum disorders: The Taiwan Birth Cohort Study.

Science.gov (United States)

Lung, For-Wey; Chiang, Tung-Liang; Lin, Shio-Jean; Lee, Meng-Chih; Shu, Bih-Ching

2018-04-01

The use of assisted reproduction technology has increased over the last two decades. Autism spectrum disorders and assisted reproduction technology share many risk factors. However, previous studies on the association between autism spectrum disorders and assisted reproduction technology have shown inconsistent results. The purpose of this study was to investigate the association between assisted reproduction technology and autism spectrum disorder diagnosis in a national birth cohort database. Furthermore, the results from the assisted reproduction technology and autism spectrum disorder propensity score matching exact matched datasets were compared. For this study, the 6- and 66-month Taiwan Birth Cohort Study datasets were used (N = 20,095). In all, 744 families were propensity score matching exact matched and selected as the assisted reproduction technology sample (ratio of assisted reproduction technology to controls: 1:2) and 415 families as the autism spectrum disorder sample (ratio of autism spectrum disorder to controls: 1:4). Using a national birth cohort dataset, controlling for the confounding factors of assisted reproduction technology conception and autism spectrum disorder diagnosis, both assisted reproduction technology and autism spectrum disorder propensity score matching matched datasets showed the same results of no association between assisted reproduction technology and autism spectrum disorder. Further study on the detailed information regarding the processes and methods of assisted reproduction technology may provide us with more information on the association between assisted reproduction technology and autism spectrum disorder.

A cultural study of a science classroom and graphing calculator-based technology

Science.gov (United States)

Casey, Dennis Alan

Social, political, and technological events of the past two decades have had considerable bearing on science education. While sociological studies of scientists at work have seriously questioned traditional histories of science, national and state educational systemic reform initiatives have been enacted, stressing standards and accountability. Recently, powerful instructional technologies have become part of the landscape of the classroom. One example, graphing calculator-based technology, has found its way from commercial and domestic applications into the pedagogy of science and math education. The purpose of this study was to investigate the culture of an "alternative" science classroom and how it functions with graphing calculator-based technology. Using ethnographic methods, a case study of one secondary, team-taught, Environmental/Physical Science (EPS) classroom was conducted. Nearly half of the 23 students were identified as students with special education needs. Over a four-month period, field data was gathered from written observations, videotaped interactions, audio taped interviews, and document analyses to determine how technology was used and what meaning it had for the participants. Analysis indicated that the technology helped to keep students from getting frustrated with handling data and graphs. In a relatively short period of time, students were able to gather data, produce graphs, and to use inscriptions in meaningful classroom discussions. In addition, teachers used the technology as a means to involve and motivate students to want to learn science. By employing pedagogical skills and by utilizing a technology that might not otherwise be readily available to these students, an environment of appreciation, trust, and respect was fostered. Further, the use of technology by these teachers served to expand students' social capital---the benefits that come from an individual's social contacts, social skills, and social resources.

Study for improvement of light water reactor technology, (3)

International Nuclear Information System (INIS)

Suzuki, Hideaki; Morita, Terumichi; Igarashi, Hiroshi; Tabata, Hiroaki

1991-01-01

The Japan Atomic Power Company has performed some studies, which are referred to as 'some feasibility studies of LWR technology', in order to help improve and up-grade the light water reactor technology. We would like to show the key results of the above studies in an orderly fashion in this document. As the third issue, this paper describes the study of the feasibility of applying a suppression pool system in a 4-loop PWR plant in order to reduce containment volume and evaluates the merits of such a system. The results confirmed the feasibility of such a plant consisting of a 4-loop plant with a suppression pool system. The expected merits of a suppression pool type PWR are as follows: (1) The volume within the containment boundary is half of that for the conventional plant. This reduces the material quantity substantially. (2) A wider layout space is obtained since the operating floor is located outside the containment are. And this improves the maneuverability of plant outage. (3) Low center of gravity of the plant contributes to improving the ability to withstand seismic activity. Although there are some open items left that should be confirmed, we consider that PWR with small CV is an appealing plant in the light of further sales points such as relaxing siting conditions, extending the use of robotics and so on. (author)

"Disruptive Technologies", "Pedagogical Innovation": What's New? Findings from an In-Depth Study of Students' Use and Perception of Technology

Science.gov (United States)

Conole, Grainne; de Laat, Maarten; Dillon, Teresa; Darby, Jonathan

2008-01-01

The paper describes the findings from a study of students' use and experience of technologies. A series of in-depth case studies were carried out across four subject disciplines, with data collected via survey, audio logs and interviews. The findings suggest that students are immersed in a rich, technology-enhanced learning environment and that…

Technology teachers as researchers : philosophical and empirical technology education studies in the Swedish TUFF Research School

NARCIS (Netherlands)

Skogh, I.B.; Vries, de M.J.

2013-01-01

This book presents the scientific output of the TUFF research school in Sweden. In this school, a group of active teachers worked together on a series of educational research studies. All of those studies were related to the teaching about technology and engineering. The research program consisted

Development and Validation of Information Technology Mentor Teacher Attitude Scale: A Pilot Study

Science.gov (United States)

Saltan, Fatih

2015-01-01

The aim of this study development and validation of a teacher attitude scale toward Information Technology Mentor Teachers (ITMT). ITMTs give technological support to other teachers for integration of technology in their lessons. In the literature, many instruments have been developed to measure teachers' attitudes towards the technological tools…

Initial Technology Assessment for the Large UV-Optical-Infrared (LUVOIR) Mission Concept Study

Science.gov (United States)

Bolcar, Matthew R.; Feinberg, Lee D.; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

2016-01-01

The NASA Astrophysics Divisions 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet-optical-infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for bio-signatures via direct-imaging and spectroscopic characterization of habitable exo-planets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV-Optical Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

Study on underwater plasma arc cutting technology

International Nuclear Information System (INIS)

Yada, Toshio; Nakamura, Uhachiro; Tomidokoro, Sakae; Fukuzawa, Mitsuo

1980-01-01

The zirconium alloy tube of the impile creep test facility had been subjected to inner pressure in the Japan Material Testing Reactor (JMTR) environment. In the near future, it will be necessary to dismantle the facility and to take out the tube for such examinations as irradiation effects on material properties. In order to establish the dismantling technology for the radioactive facility, a study on underwater plasma arc cutting has been carried out since 1977. Primarily, optimum underwater cutting sequence and conditions were studied in details for developing the remote control handling and the cutting system. Further, the amounts of particles suspended in water as well as those contained in bubbled gas were quantitatively analyzed for developing a safe removal system for contaminants which were produced by cutting the radioactive material. As a result of this study, it has been concluded that the underwater plasma arc cutting method is generally suitable and effective for dismantling such radioactive material as the impile creep test facility of the JMTR. (author)

Study on tamper-indicating technology in electronic seals system

International Nuclear Information System (INIS)

Xu Xiong; Han Feng; Zuo Guangxia; Zhao Xin; Zhang Quanhu; Di Yuming

2009-01-01

To strengthen our national arms control verification technical storage and deepen electronic seals' research, this paper mainly introduces seals' characteristics, functions and work principle, studies on tamper-indicating technology which is a key technology in electronic seals, designs some hardware circuit such as optical transceiver, temperature detection circuit, move detection circuit, re-prized circuit and so on, also designs a software program which is used for recording the destroying or tampering events' information. Experimental results show that electronic seals system can record the destroying or tampering events' information accurately and quickly, and give corresponding tamper-indication. (authors)

Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches

Science.gov (United States)

Garcia-Penalvo, Francicso Jose

2013-01-01

Our differences in language, cultures, and history around the world play a vital role in the way we learn. As technology-based education continues to be used worldwide, there is an ever growing interest in how multiculturalism comes into effect. Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches explores the…

Studies of cell biomechanics with surface micro-/nano-technology

International Nuclear Information System (INIS)

Wang Dong; Zhang Wei; Jiang Xingyu

2011-01-01

We report the recent progress in our studies of cell biology using micro-/nano-technology. Cells have a size of several to tens of microns, which makes them easily manipulated by micro-/nano-technology. The shape of the cell influences the alignment of the actin cytoskeleton, which bears the main forces of the cell, maintains the shape,and mediates a series of biochemical reactions. We invented a stretching device and studied the real-time actin filament dynamics under stretch. We found that one stretch cycle shortened the actin filaments and promoted their reassemble process. Cell migration is a complex mechanical process. We found that cell geometry determines the cell polarity and migration direction. We fabricated three-dimensional surfaces to mimic the topography in vivo, and further built a cell culture model by integrating the three-dimensional surface, microfluidics, cell patterning,and coculturing of multiple cell types. We also investigated the neuronal guidance by surface patterning. (authors)

Aero-Propulsion Technology (APT) Task V Low Noise ADP Engine Definition Study

Science.gov (United States)

Holcombe, V.

2003-01-01

A study was conducted to identify and evaluate noise reduction technologies for advanced ducted prop propulsion systems that would allow increased capacity operation and result in an economically competitive commercial transport. The study investigated the aero/acoustic/structural advancements in fan and nacelle technology required to match or exceed the fuel burned and economic benefits of a constrained diameter large Advanced Ducted Propeller (ADP) compared to an unconstrained ADP propulsion system with a noise goal of 5 to 10 EPNDB reduction relative to FAR 36 Stage 3 at each of the three measuring stations namely, takeoff (cutback), approach and sideline. A second generation ADP was selected to operate within the maximum nacelle diameter constrain of 160 deg to allow installation under the wing. The impact of fan and nacelle technologies of the second generation ADP on fuel burn and direct operating costs for a typical 3000 nm mission was evaluated through use of a large, twin engine commercial airplane simulation model. The major emphasis of this study focused on fan blade aero/acoustic and structural technology evaluations and advanced nacelle designs. Results of this study have identified the testing required to verify the interactive performance of these components, along with noise characteristics, by wind tunnel testing utilizing and advanced interaction rig.

Current Highlights on ESA's Planetary Technology Reference Studies

Science.gov (United States)

Falkner, P.

The concept of Technology Reference Studies has been introduced already at EGU05, where the Venus Entry Probe (VEP), the Jupiter Minisat Explorer (JME), the Deimos Sample Return (DSR) and the Interstellar Heliopause Probe (IHP) have been presented in detail. At the EGU06 the new studies in reaction to the Cosmic Vision exercise have been introduced. The formulation of themes and mapping into potential future missions has been taken as basis in the planning of additional new and adaptation of existing TRS's to cover areas, which have not yet been addressed by any TRS. These new ongoing studies are progressing well and current highlights will be presented in the paper in further detail as well as an overview on supporting technology studies and Concurrent Design Facility (CDF) sessions. The Jupiter System Explorer (JSE) study investigates mission concepts with up to two Magnetospheric Orbiters placed in a highly elliptical Jovian orbit and the possibility to deploy a Jovian Entry Probe. The mission profile is based on a solar powered concept launched on a Soyuz-Fregat launcher. Mission analysis and the application of a new Jovian radiation model are supporting the study activities. The Near-Earth Asteroid Sample Return (NEA-SR) concept explores the possibilities of sample return or in-situ mission profiles with visits to up to two NEA targets. Due to the assumed low cost cap a trade between a sample return and remote/in-situ exploration concept has a high attention in the study. The Cross Scale TRS (CS-TRS) is intended to simultaneously investigate magnetospheric and plasma processes in three spatial scales with a formation flight of up to 12 spacecraft, orbiting on deep elliptical orbits around Earth. One of the major challenges is the launch of that number of spacecraft on a single launcher and the collisionless deployment of the formation at the target orbit. The scope if the GeoSail TRS is to demonstrate deployment, attitude control and navigation concepts for a

A study of the impact of technology in early education

OpenAIRE

Wajszczyk, Rafal

2014-01-01

The purpose of this study is to analyse the current state of the use of Information and communication technology (ICT) and its impact on pupils in their early stages of education. The aim is to find out how, when and in what context ICT is used in the work with students. The overall objective is to study teachers views on ICT and their opinion on how ICT does affects pupils - positively or negatively. The results of this study are based on both a literature review and a qualitative study. The...

Debating the future of genetically modified plants - bridging knowledge dimensions. A technology foresight study

DEFF Research Database (Denmark)

Borch, Kristian; Rasmussen, Birgitte

2003-01-01

Rapid developments in, and the controversial nature of, biotechnology call for communication, networks, partnerships, and collaboration in research, not just among researchers but also between researchers and research “users” in industry, government, andelsewhere. Technological foresight appears...... to offer a coordinating method for developing and strengthening those linkages. To test this, a technological foresight study was performed on genetically modified (GM) crop technology in the Danish context. Thebackground to the study was the conflict and intense debate in Denmark over applications of gene...... public audience finds it hard to comprehend this type of debate. The study pursues the notion thatpublic dialogue can act as a driver of future applications in the technological domain, specifically GM crops. The study concluded with a stakeholder workshop that revealed three key issues that might...

Integrating Information Technology's Competencies into Academic Nursing Education--An Action Study

Science.gov (United States)

Gonen, Ayala; Sharon, Dganit; Lev-Ari, Lilac

2016-01-01

Today, in the digital age, we are committed to prepare the future nurse for the information technology-rich workplace, and to help them reducing the "shock reality" upon arriving at the clinical setting. The main aim of the study is to promote the knowledge of Information Competencies Technology among nurses' educators and student. The…

Technology transfer for Ukrainian milk treatment: A case study

International Nuclear Information System (INIS)

Dunn, M.J.; Walker, J.S.

1994-01-01

As a result of the Chernobyl Nuclear Power Plant accident, radioactive fission products have contaminated the food chain in the Ukraine. The highest doses to humans are a result of cesium contamination in milk. The milk produced in the Ukraine contains radioactive cesium at levels up to 10 times the acceptance standards. Bradtec has developed and demonstrated technology for the US Department of Energy for the treatment of groundwater and effluent water. This technology has also been tested and demonstrated for the Ukrainian government for the purpose of treating contaminated milk. Bradtec, a small business offering specialized technologies in the field of environmental remediation and waste management, has successfully worked with a consortium of businesses, National Laboratories and DOE Headquarters staff to develop and implement a technology demonstration strategy which has led to the implementation of a series collaboration agreements with Ukrainian officials. This paper describes, in a case study approach, the path followed by Bradtec and its collaboration partners in successfully implementing a technology transfer strategy. Also presented is an update on new programs that can provide benefit to private sector companies as DOE seeks to assist the private sector in joint venture/technology transfer relationships with the NIS (New Independent States). This paper should be of interest to all businesses seeking to participate in business opportunities in the NIS

A Study on Persuasive Technologies: The Relationship between User Emotions, Trust and Persuasion

Directory of Open Access Journals (Sweden)

Wan Nooraishya Wan Ahmad

2018-06-01

Full Text Available A successful persuasive technology is able to persuade people to change from one state to a more well known state. Therefore, to allow for a change, persuasive technology must be able to affect users’ emotion and make the user trust the technology so that they will adopt the persuasive technology into their daily life routine, as well as continue to use the technology for long period. This paper is aimed to study the relation between users’ emotion with trust and persuasion and how they may contribute to the success of changing a person attitude or behavior towards a certain context or issue. Twenty five participants have completed the study in 6 weeks by using two types of persuasive technology that were assessed at three different interaction stages: pre, during and post. Result shows that emotions have a significant effect on trust, whereas the effect of emotions on persuasion using the persuasive technology was mediated by trust.

Effective Information Technology Governance Mechanisms: An Australian Study

Directory of Open Access Journals (Sweden)

Syaiful Ali

2006-01-01

Full Text Available Growing importance of information technology (IT, as a strategic factor for organizations in achieving their objectives, have raised the concern of organizations in establishing and implementing effective IT governance. This study seeks to empirically examine the individual IT governance mechanisms that influence the overall effectiveness of IT governance. The data were obtained by using web based survey from 176 members of ISACA (Information Systems and Audit Control Association Australia. This study examines the influences of six proposed IT governance mechanisms on the overall effectiveness of IT governance. Using Factor Analysis and Multiple Regression techniques, the current study finds significant positive relationships between the overall level of effective IT governance and the following four IT governance mechanisms: the existence of ethics/ culture of compliance in IT, corporate communication systems, an IT strategy committee, and the involvement of senior management in IT.

Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

Directory of Open Access Journals (Sweden)

Roisin P. Corcoran

2014-12-01

Full Text Available This paper describes the use of technology to provide virtual professional development (VPD for teachers and to conduct classroom observations in a study of English Language Learner (ELL instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral language/literacy, reading, and science across 63 randomly assigned urban, suburban, and rural schools (first year of implementation. ELLA-V also examines the impact of bimonthly VPD for treatment teachers compared to comparison group teachers on pedagogical skills, measured by sound observation instruments, and on student achievement, measured by state/national English language/literacy/reading tests and a national science test. This study features extensive technology use via virtual observations, bimonthly VPD, and randomly assigned treatment and control schools with students served in English as second language (ESL instructional time. The study design and methodology are discussed relativeto the specialized uses of technology and issues involving the evaluation of technology’s contribution to the intervention of interest and of the efficient, cost-effective execution of the study.

Project-Based Learning in Electronic Technology: A Case Study

Science.gov (United States)

Li, Li

2015-01-01

A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

Small transport aircraft technology propeller study

Science.gov (United States)

Black, B. M.; Magliozzi, B.; Rohrbach, C.

1983-01-01

A study to define potential benefits of advanced technology propeller for 1985-1990 STAT commuter airplanes was completed. Two baselines, a Convair, 30 passenger, 0.47 Mach number airplane and a Lockheed, 50 passenger, 0.70 Mach number airplane, were selected from NASA-Ames sponsored airframe contracts. Parametric performance, noise level, weight and cost trends for propellers with varying number of blades, activity factor, camber and diameter incorporating blade sweep, tip proplets, advanced composite materials, advanced airfoils, advanced prevision synchrophasing and counter-rotation are presented. The resulting DOC, fuel burned, empty weight and acquisition cost benefits are presented for resizings of the two baseline airplanes. Six-bladed propeller having advanced composite blades, advanced airfoils, tip proplets and advanced prevision synchrophasers provided the maximum DOC improvements for both airplanes. DOC and fuel burned were reduced by 8.3% and 17.0% respectively for the Convair airplane and by 24.9% and 41.2% respectively for the Lockheed airplane. The larger reductions arose from a baseline definition with very heavy fuselage acoustic treatment. An alternate baseline, with a cabin noise 13dB in excess of the objective, was also studied.

Crucial design issues for special access technology; a Delphi study.

Science.gov (United States)

O'Rourke, Pearl; Ekins, Ray; Timmins, Bernard; Timmins, Fiona; Long, Siobhan; Coyle, Eugene

2014-01-01

To develop and demonstrate a method to involve professional users of assistive technology (AT) in the development process of customisable products. Employing the ideas of user participation and mass customisation, this research addresses the need for reduced product costs and optimised product flexibility. An adaptable six-question Delphi study was developed to establish consensus among AT professionals on design issues relating to a specified AT domain requiring innovation. The study is demonstrated for the special access technology (SAT) domain. A modified morphological matrix structures the application of the study results to the product design process. Fourteen professionals from the Republic of Ireland and the UK participated. Consensus was reached on prevalent parts of SAT that malfunction, primary reasons for SAT malfunction, characteristics of clients associated with SAT selection, client needs regarding SAT use and training, desirable traits of SAT and clinicians' frustrations with SAT. The study revealed a range of problems related to SAT, highlighting the complexities of successful SAT adoption. The questions led to differentiated insights and enabled design solution conceptualisation from various perspectives. The approach was found to help facilitate efficient generation and application of professional users' knowledge during the design process of customisable AT.

An Evaluative Case Study on Professional Competency of Preservice Information Technology Teachers

Science.gov (United States)

Kabakci Yurdakul, Isil

2011-01-01

The purpose of this study is to evaluate preservice Information Technology (IT) teachers' professional competency in the teaching process. The study was designed on the basis of evaluative case study. The participants of the study consisted of seven preservice IT teachers attending the department of Computer Education and Instructional…

Implementation of Health Information Technology in Routine Care for Fibromyalgia: Pilot Study.

Science.gov (United States)

Sparks, Toni; Kawi, Jennifer; Menzel, Nancy Nivison; Hartley, Kendall

2016-02-01

Fibromyalgia management remains complicated and challenging. Health information technology is an evidence-based, nonpharmacological self and symptom management strategy, but few studies have evaluated its feasibility for managing fibromyalgia patients in clinical practice. FibroGuide is an example of an evidence-based, interactive, and computer-based program comprised of 10 educational modules on fibromyalgia. Study aims were to: (1) develop a process for implementing FibroGuide into the routine care of patients with fibromyalgia, (2) evaluate the overall impact on fibromyalgia before and after a 12-week implementation, and (3) assess patient perspectives on using FibroGuide health information technology to assist in self-management. In this pilot study, 35 participants with fibromyalgia were recruited from an Advanced Practice Registered Nurse's outpatient clinic. Using a descriptive design, quantitative data analysis was employed to address study aims. Based on data collection pre- and post-intervention using paired samples testing, a statistically significant change (p = .017) was observed in overall fibromyalgia impact (improved symptom severity, activity, and function). Majority felt that FibroGuide was helpful as part of their routine care, and nearly half reported that it assisted in their self-management. Although 65% noted that technology was an effective and efficient way to receive education for fibromyalgia management, 57% preferred talking to healthcare providers. Larger longitudinal studies are needed on the use of health information technology in fibromyalgia, evaluating both statistical and clinical significance, while decreasing barriers to participant use for this promising adjunct to clinical management. Providers need to be well educated on supporting self-management strategies and health information technology. Copyright © 2016 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

The current status of usability studies of information technologies in China: a systematic study.

Science.gov (United States)

Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

2014-01-01

To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Six hundred forty-seven publications were selected for analysis. We found that in China the literature on usability in the field of information technology began in 1994 and increased thereafter. The usability definitions from ISO 9241-11:1998 and Nielsen (1993) have been widely recognized and cited. Authors who have published several publications are rare. Fourteen journals have a publishing rate over 1%. Only nine publications about HIT were identified. China's usability research started relatively late. There is a lack of organized research teams and dedicated usability journals. High-impact theoretical studies are scarce. On the application side, no original and systematic research frameworks have been developed. The understanding and definition of usability is not well synchronized with international norms. Besides, usability research in HIT is rare. More human and material resources need to be invested in China's usability research, particularly in HIT.

INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

International Nuclear Information System (INIS)

Banford, Anthony; Edwards, Jeremy; Demmer, Rick; Rankin, Richard; Hastings, Jeremy

2013-01-01

International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

Energy Technology Data Exchange (ETDEWEB)

Banford, Anthony; Edwards, Jeremy [National Nuclear Laboratory, 5th Floor Chadwick House, Birchwood Park, Warrington WA3 6AE(United Kingdom); Demmer, Rick; Rankin, Richard [Idaho National Laboratory, Idaho Falls, ID 83401(United States); Hastings, Jeremy [National Nuclear Laboratory, Central Laboratory Sellafield, Seascale, Cumbria CA20 1PG (United Kingdom)

2013-07-01

International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

A Phenomenological Study: Experiences of Chinese Students Using Educational Technology in American Universities

Science.gov (United States)

Jiang, Ying

2017-01-01

This phenomenological study explores the educational technology experiences of ten Chinese international students at American universities. It describes their technology experiences and the influence on their technology self-efficacy and acculturation to the university culture in America. Seidman's (1998) three-interview approach was employed to…

A Cultural Study of a Science Classroom and Graphing Calculator-based Technology

OpenAIRE

Casey, Dennis Alan

2001-01-01

Social, political, and technological events of the past two decades have had considerable bearing on science education. While sociological studies of scientists at work have seriously questioned traditional histories of science, national and state educational systemic reform initiatives have been enacted, stressing standards and accountability. Recently, powerful instructional technologies have become part of the landscape of the classroom. One example, graphing calculator-based technology...

Modern needs in health technology assessment: a study of comparative effectiveness

Directory of Open Access Journals (Sweden)

A. V. Pavlysh

2013-01-01

Full Text Available Health technology assessment is a key component of healthcare decision making in most of the developed countries. Comparative effectiveness research as one of the elements of such assessment is becoming increasingly important in recent years. It is based on the effectiveness analysis of health technologies in real clinical practice setting. The authors have analyzed publications dedicated to these issues and showed the main methods of such study, its peculiarities, advantages and disadvantages. It has been revealed that the most frequently used designs of expert analysis are observational and pragmatic randomized studies. The main recommendations on analyzing comparative effectiveness are given in view of the literary data.

Technology Leadership of Education Administrators and Innovative Technologies in Education: A Case Study of Çorum City

Science.gov (United States)

Kör, Hakan; Erbay, Hasan; Engin, Melih

2016-01-01

In this global world in which educational technologies have developed at such a great pace, it is possible to say that administrators in the education sector are obliged with serious roles with regard to keeping up with the evolving technology and the management of education in this virtual environment. In the present study utilizing screening…

Remote monitoring technologies for the prevention of metabolic syndrome: the Diabetes and Technology for Increased Activity (DaTA) study.

Science.gov (United States)

Stuckey, Melanie; Fulkerson, Robyn; Read, Emily; Russell-Minda, Elizabeth; Munoz, Claudio; Kleinstiver, Peter; Petrella, Robert

2011-07-01

Remote monitoring technologies are ideally suited for rural communities with limited access to health care. In an 8-week pilot study, we examined the feasibility of implementing and conducting a technology-intensive intervention in an underserviced rural setting. Our goal was to test the utility of self-monitoring technologies, physical activity, and education as tools to manage health indicators for the development of the cardiovascular complications (CVCs) of type 2 diabetes. The Diabetes and Technology for Increased Activity study was an open single-center study conducted in a community-based research setting. All 24 participants were provided with a Blackberry™ Smartphone, blood pressure monitor, glucometer, and pedometer. Smartphones transmitted measurements and survey results to the database, interfaced participants with the clinical team, and allowed for self-monitoring. Outcomes were improved body composition, improved markers of CVC risk factors, increased daily exercise, and interest in or awareness of lifestyle changes that impact health outcomes. Participants had excellent compliance for measurements, as self-monitoring provided a sense of security that improved from week 4 to week 8. Our team gained substantial insight into the operational requirements of technology-facilitated health care, including redefined hours of service; data reporting, management, and access protocols; and the utility of real-time clinical measures by remote monitoring. We developed an understanding of knowledge translation strategies as well as successful motivational and educational tools. Importantly, remote monitoring technology was found to be feasible and accepted in a rural setting. © 2011 Diabetes Technology Society.

Integrating Science and Technology: Using Technological Pedagogical Content Knowledge as a Framework to Study the Practices of Science Teachers

Science.gov (United States)

Pringle, Rose M.; Dawson, Kara; Ritzhaupt, Albert D.

2015-01-01

In this study, we examined how teachers involved in a yearlong technology integration initiative planned to enact technological, pedagogical, and content practices in science lessons. These science teachers, engaged in an initiative to integrate educational technology in inquiry-based science lessons, provided a total of 525 lesson plans for this…

Signature Pedagogy: A Literature Review of Social Studies and Technology Research

Science.gov (United States)

Beck, Dennis; Eno, Jenni

2012-01-01

A literature review of 121 peer-reviewed articles, books, and conference proceedings was conducted to determine the signature pedagogies of social studies education and technology integration. The authors found that the signature social studies pedagogy is based on two primary instructional models: direct-instruction and inquiry-based,…

Technology study of Gunite tank sludge mobilization at Oak Ridge National Laboratory, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

DeVore, J.R.; Herrick, T.J.; Lott, K.E.

1994-12-01

The Oak Ridge National Laboratory (ORNL) Gunite Tank Sludge Mobilization Technology Study was initiated to support the Gunite Tank Treatability Study effort. The technology study surveyed the methods and technologies available for tank cleaning and sludge mobilization in a radioactive environment. Technologies were identified and considered for applicability to the Gunite and Associated Tanks (GAAT) problems. These were then either accepted for further study or rejected as not applicable. Technologies deemed applicable to the GAAT sludge removal project were grouped for evaluation according to (1) deployment method, (2) types of remotely operated end effector equipment applicable to removal of sludge, (3) methods for removing wastes from the tanks, and (4) methods for concrete removal. There were three major groups of deployment technologies: ``past practice`` technologies, mechanical arm-based technologies, and vehicle-based technologies. The different technologies were then combined into logical sequences of deployment platform, problem, end effector, conveyance, post-removal treatment required (if any), and disposition of the waste. Many waste removal options are available, but the best technology in one set of circumstances at one site might not be the best type to use at a different site. No single technology is capable of treating the entire spectrum of wastes that will be encountered in GAAT. None of the systems used in other industries appears to be suitable, primarily because of the nature of the sludges in the GAAT Operable Unit (OU), their radiation levels, and tank geometries. Other commercial technologies were investigated but rejected because the authors did not believe them to be applicable.

Technology study of Gunite tank sludge mobilization at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

DeVore, J.R.; Herrick, T.J.; Lott, K.E.

1994-12-01

The Oak Ridge National Laboratory (ORNL) Gunite Tank Sludge Mobilization Technology Study was initiated to support the Gunite Tank Treatability Study effort. The technology study surveyed the methods and technologies available for tank cleaning and sludge mobilization in a radioactive environment. Technologies were identified and considered for applicability to the Gunite and Associated Tanks (GAAT) problems. These were then either accepted for further study or rejected as not applicable. Technologies deemed applicable to the GAAT sludge removal project were grouped for evaluation according to (1) deployment method, (2) types of remotely operated end effector equipment applicable to removal of sludge, (3) methods for removing wastes from the tanks, and (4) methods for concrete removal. There were three major groups of deployment technologies: ''past practice'' technologies, mechanical arm-based technologies, and vehicle-based technologies. The different technologies were then combined into logical sequences of deployment platform, problem, end effector, conveyance, post-removal treatment required (if any), and disposition of the waste. Many waste removal options are available, but the best technology in one set of circumstances at one site might not be the best type to use at a different site. No single technology is capable of treating the entire spectrum of wastes that will be encountered in GAAT. None of the systems used in other industries appears to be suitable, primarily because of the nature of the sludges in the GAAT Operable Unit (OU), their radiation levels, and tank geometries. Other commercial technologies were investigated but rejected because the authors did not believe them to be applicable

Hurdling barriers through market uncertainty: Case studies ininnovative technology adoption

Energy Technology Data Exchange (ETDEWEB)

Payne, Christopher T.; Radspieler Jr., Anthony; Payne, Jack

2002-08-18

The crisis atmosphere surrounding electricity availability in California during the summer of 2001 produced two distinct phenomena in commercial energy consumption decision-making: desires to guarantee energy availability while blackouts were still widely anticipated, and desires to avoid or mitigate significant price increases when higher commercial electricity tariffs took effect. The climate of increased consideration of these factors seems to have led, in some cases, to greater willingness on the part of business decision-makers to consider highly innovative technologies. This paper examines three case studies of innovative technology adoption: retrofit of time-and-temperature signs on an office building; installation of fuel cells to supply power, heating, and cooling to the same building; and installation of a gas-fired heat pump at a microbrewery. We examine the decision process that led to adoption of these technologies. In each case, specific constraints had made more conventional energy-efficient technologies inapplicable. We examine how these barriers to technology adoption developed over time, how the California energy decision-making climate combined with the characteristics of these innovative technologies to overcome the barriers, and what the implications of hurdling these barriers are for future energy decisions within the firms.

Enterprise Model for Vendor Development: A Study at Selected Technology Park

Directory of Open Access Journals (Sweden)

Abdul Aziz Ab. Latif

2012-01-01

Full Text Available The study addresses the issues of skills enhancement that need be implemented in three distinct phases of enterprise development. Phase I is the developmental phase where potential entrepreneurs are provided with skills needed for venture take-off or start-up. Phase II is the enterprise creation phase while Phase III is the market development phase. This paper also discusses the multiple roles of the Techno Center during each of these distinct phases. Based on the analysis, the study found that there are gaps across industrial sub-sectors in term of various skills needed to create sustainable enterprise and entrepreneur development. Those gaps are cognitive, interpersonal, technical, creativity, computation, communication, intrapersonal, conceptual, managerial, analytical, technological, acoustic, design, self-management, innovative, basic managerial, supervisory, and marketing. The Techno Centre Enterprise Development Model highlights the central and multiple roles required of The Techno Centre in order to effectively provide support and services during various phases of enterprise development. The services include skill development, networking and linkages services; technology transfer and consultancy services; advisory services; and after-care services have different contents at different stages of the enterprise development.Key words: technology park, sustainable enterprise, technology transfer

ECLSS Integration Analysis: Advanced ECLSS Subsystem and Instrumentation Technology Study for the Space Exploration Initiative

Science.gov (United States)

1990-01-01

In his July 1989 space policy speech, President Bush proposed a long range continuing commitment to space exploration and development. Included in his goals were the establishment of permanent lunar and Mars habitats and the development of extended duration space transportation. In both cases, a major issue is the availability of qualified sensor technologies for use in real-time monitoring and control of integrated physical/chemical/biological (p/c/b) Environmental Control and Life Support Systems (ECLSS). The purpose of this study is to determine the most promising instrumentation technologies for future ECLSS applications. The study approach is as follows: 1. Precursor ECLSS Subsystem Technology Trade Study - A database of existing and advanced Atmosphere Revitalization (AR) and Water Recovery and Management (WRM) ECLSS subsystem technologies was created. A trade study was performed to recommend AR and WRM subsystem technologies for future lunar and Mars mission scenarios. The purpose of this trade study was to begin defining future ECLSS instrumentation requirements as a precursor to determining the instrumentation technologies that will be applicable to future ECLS systems. 2. Instrumentation Survey - An instrumentation database of Chemical, Microbial, Conductivity, Humidity, Flowrate, Pressure, and Temperature sensors was created. Each page of the sensor database report contains information for one type of sensor, including a description of the operating principles, specifications, and the reference(s) from which the information was obtained. This section includes a cursory look at the history of instrumentation on U.S. spacecraft. 3. Results and Recommendations - Instrumentation technologies were recommended for further research and optimization based on a consideration of both of the above sections. A sensor or monitor technology was recommended based on its applicability to future ECLS systems, as defined by the ECLSS Trade Study (1), and on whether its

Elementary Principals' Strategies for Managing the Educational Technology Refresh Process: A Case Study

Science.gov (United States)

Denton, Edward A.

2011-01-01

Increased uses of educational technology by students and teachers in recent years have compelled elementary principals to expand educational technology resources and replace educational technology resources at the end of it's service life. The purpose of this study was to investigate strategies and practices employed by elementary principals…

Managing knowledge: a technology transfer case study in IEN

International Nuclear Information System (INIS)

Pereira, Ana Gabriella Amorim Abreu

2009-01-01

Knowledge management is paramount nowadays. In order to enable the members of an organization to deal with their current situations effectively it is mandatory to know and enhance its intellectual capital. Managing the organization knowledge is important to the extent that it allows and reinforce its mission (what we are trying to accomplish?), and performance (how do we deliver the results?). As a result of a knowledge management effort, the organization can create value for itself and for society as a whole. In this paper, we argue that a technology developed at a research institute and transferred to an industry is knowledge to be managed in order to create value, both for the society and for the Institute. In order to manage such knowledge, it is proposed an approach to enhance the value creation potential of a technology transfer. This paper propose an investigation to expand the understanding on how a public research institute and a private firm could introduce their value creation wishes into a technology transfer agreement in a way to reflect and provide the realization of those wishes. It is proposed that, from the identification of the organizations expectations it is possible to infer which agreement attributes will contribute to that value creation and to establish satisfactory agreement configurations. These configurations have the potential to generate those consequences, given that, through the transfer, each organization seeks to increase potential benefits and to reduce potential sacrifices. Supported by exchange flow and value creation models, by the knowledge management and the means-end theory, an approach to increase the value creation potential of a technology transfer is proposed. Evidences from a case study sustain the proposed approach. The case study unity is the Instituto de Engenharia Nuclear, a public research institute. (author)

DEVELOPING THE 21ST-CENTURY SOCIAL STUDIES SKILLS THROUGH TECHNOLOGY INTEGRATION

Directory of Open Access Journals (Sweden)

Mohammad Imam FARISI

2016-01-01

Full Text Available Recently, technology has become an educational necessity in global-digital era. Facing these phenomena, social studies (SS should make innovations related to changes of 21st-century skills and learning paradigm, which is characterized by the principles of disclosure of information, computing, automation, and communication. Technology integration into SS learning is one of the learning innovations in the global-digital era, and powerfully supports the National Council for Social Studies (NCSS as stated in their visions: meaningful, powerful, value-based, challenging, and active. It also strongly supports the development of three core skills of the 21st-century, including learning and innovation skills; information, media and technology skills; life and career skills that developed in partnership with the Partnership Forum for 21st-Century Skills (P21. This paper examines and describes academics evolution toward a commitment and further developments in research; 21stcentury skills map for the SS; and the implications for developing teachers’ competences and teachers’ education curriculum.

Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

Directory of Open Access Journals (Sweden)

Issham Ismail

2013-01-01

Full Text Available The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach Information and Technology (IT subject from different primary schools in Penang, Malaysia during a program on Teachers’ Development. Data revealed that the level of technology acceptance among respondents in terms of awareness and motivation, training and courses, training design and supports and facilities was generally high. Despite this positive acceptance of technology, teachers’ readiness for the use of mobile phone in teaching and learning was found to be at a considerably low level. However, the study identified a significant correlation between respondents’ awareness and motivation towards technology with their readiness for the pedagogical usage of mobile phone. It was also found that gender is a possible factor influencing the respondents’ readiness. As implication, this paper probes the influence of technology acceptance on teachers’ readiness for the pedagogical usage of mobile phone and the possible implications this influence affords.

Evaluating interactive technology for an evolving case study on learning and satisfaction of graduate nursing students.

Science.gov (United States)

Vogt, Marjorie A; Schaffner, Barbara H

2016-07-01

Nursing education is challenged to prepare students for complex healthcare needs through the integration of teamwork and informatics. Technology has become an important teaching tool in the blended classroom to enhance group based learning experiences. Faculty evaluation of classroom technologies is imperative prior to adoption. Few studies have directly compared various technologies and their impact on student satisfaction and learning. The purpose of this study was to evaluate technology enhanced teaching methods on the learning and satisfaction of graduate students in an advanced pharmacology class using an unfolding case study. After IRB approval, students were randomly assigned to one of three groups: blogging group, wiki group or webinar group. Students completed the evolving case study using the assigned interactive technology. Student names were removed from the case studies. Faculty evaluated the case study using a rubric, while blinded to the assigned technology method used. No significant difference was found on case study grades, the range of grades on the assignment demonstrated little differences between the methods used. Students indicated an overall positive impact related to networking and collaboration on a satisfaction survey. Impact of technology methods needs to be explored in other areas of graduate nursing education. Copyright © 2016 Elsevier Ltd. All rights reserved.

Embodied Experiences of Place: A Study of History Learning with Mobile Technologies

Science.gov (United States)

Price, S.; Jewitt, C.; Sakr, M.

2016-01-01

This paper reports an empirical study that takes a multimodal analytical approach to examine how mobile technologies shape students' exploration and experience of place during a history learning activity in situ. In history education, mobile technologies provide opportunities for authentic experiential learning activities that have the potential…

Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

OpenAIRE

Issham Ismail; Siti F Bokhare; Siti N Azizan; Nizuwan Azman

2013-01-01

The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach I...

A Study on the Role of Web Technology in Enhancing Research Pursuance among University Academia

Science.gov (United States)

Hussain, Irshad; Durrani, Muhammad Ismail

2012-01-01

The purpose of this study was to evaluate the role of web technologies in promoting research pursuance among university teachers, examine the use of web technologies by university teachers in conducting research and identify the problems of university academia in using web technologies for research. The study was delimited to academia of social…

Study on international publicity and export strategy establishment of nuclear technology

Energy Technology Data Exchange (ETDEWEB)

Lee, Ji Bok; Choi, C.O.; Park, K. B.; Chang, M. H.; Kim, K. K.; Yang, M. S.; Jung, I. H.; Kim, K. P.; Wu, J. S.; Jang, C. I.; Han, B. O.; Sim, J. H.; Chung, M.; Chung, J.K

1999-05-01

The objective of this study is to devise a proper measure for international publicity and technology export strategy. Analysed and summaries in detail are other countries nuclear policy trend and the current technology development status of Korea Standard Nuclear Plant that we developed on our own technology, design and construction technology for research reactor, System-integrated Modular Advanced Reactor of which design is in progress, Direct use of Spent PWR Fuel in CANDU Reactors, and Radioisotopes. Based on that, the measures are proposed for the export industrialization of nuclear technology and establishment of the export basis. Also the international nuclear cooperation and publicity strategy are suggested to support the technology export basis. By surveying the world nuclear status, the direction for the international cooperation and publicity is settled and the specific publicity strategy is proposed for the cooperation with IAEA and multi-countries and the establishment of the nuclear technology export basis. As part of this project, the panel on major technologies such as Korea Standard Nuclear Plant, HANARO, and System-integrated Modular Advanced Reactor was displayed successfully at the IAEA meeting, which contribute much to the publicity of our nuclear technology to the international nuclear society. (author)

Studies on engineering technologies in the Mizunami Underground Research Laboratory. FY 2007 (Contract research)

International Nuclear Information System (INIS)

Noda, Masaru; Suyama, Yasuhiro; Nobuto, Jun; Ijiri, Yuji; Mikake, Shinichiro; Matsui, Hiroya

2009-07-01

The Mizunami Underground Research Laboratory (MIU) of the Japan Atomic Energy Agency is a major site for geoscientific research to advance the scientific and technological basis for geological disposal of high-level radioactive waste in crystalline rock. Studies on relevant engineering technologies in the MIU consist of a) research on design and construction technology for very deep underground applications, and b) research on engineering technology as a basis of geological disposal. In the Second Phase of the MIU project (the construction phase), engineering studies have focused on research into design and construction technologies for deep underground. The main subjects in the study of very deep underground structures consist of the following: 'Demonstration of the design methodology', 'Demonstration of existing and supplementary excavation methods', 'Demonstration of countermeasures during excavation' and 'Demonstration of safe construction'. In the FY 2007 studies, identification and evaluation of the subjects for study of engineering technologies in the construction phase were carried out to optimize future research work. Specific studies included: validation of the existing design methodology based on data obtained during construction; validation of existing and supplementary rock excavation methods for very deep shafts; estimation of rock stability under high differential water pressures, methodology on long-term maintenance of underground excavations and risk management systems for construction of underground structures have been performed. Based on these studies, future research focused on the four subject areas, which are 'Demonstration of the design methodology', 'Demonstration of existing and supplementary excavation methods', 'Demonstration of countermeasures during excavation' and 'Demonstration of safe construction', has been identified. The design methodology in the first phase of the MIU Project (surface-based investigation phase) was verified to

An Exploratory Study of the Implementation of Computer Technology in an American Islamic Private School

Science.gov (United States)

Saleem, Mohammed M.

2009-01-01

This exploratory study of the implementation of computer technology in an American Islamic private school leveraged the case study methodology and ethnographic methods informed by symbolic interactionism and the framework of the Muslim Diaspora. The study focused on describing the implementation of computer technology and identifying the…

Studies on Development of Space Kimchi Using Radiation Fusion Technology with Food Technology

International Nuclear Information System (INIS)

Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Seok; Park, Jin Kyu; Park, Jae Nam

2007-04-01

Kimchi is Korean traditional fermented vegetable, it was known to one of health food through the world 5 sorts and to one of culture bequest of 100 kinds. In this study, it was conducted to development of Korean space food. Object of the study is development of food processed technology for long term storage and stability of supply at severe environment such as space, desert, deep sea. Irradiation technology is cold sterilization method, and it is able to fusion with the other food manufacturing and additives using method. Therefore, this study can offer to basic information for development of Korean space food. Side by side, it was expected that preceding results were able to wide utilization extension such as export of cured fermentation food. This study was conducted to evaluate the combined effects of additives (A), N2-packaging (N 2 ), mild heating at 60 .deg. C (HT) and gamma irradiation of 25 kGy (IR) at frozen state (F) on the shelf stability and quality of Kimchi during storage at 35 .deg. C for 30 days. Briefly, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of Kimchi. However, sensory quality was decreased. After all, irradiation was conducted at Kimchi samples for quality maintenance after gas exchange packaging method such as N 2 -packaging, quick freezing(-70 .deg. C). Therefore, the combination treatment was effected to insurance of shelf-life and satisfaction of quality. But other methods needed for inhibition deterioration of texture. Calcium lactate and vitamin C were added at Kimchi for prevention of softening, oleoresin paprika and artificial Kimchi flavor were added for improvement of sensory quality decreased by severe sterilization

Studies on Development of Space Kimchi Using Radiation Fusion Technology with Food Technology

Energy Technology Data Exchange (ETDEWEB)

Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Seok; Park, Jin Kyu; Park, Jae Nam

2007-04-15

Kimchi is Korean traditional fermented vegetable, it was known to one of health food through the world 5 sorts and to one of culture bequest of 100 kinds. In this study, it was conducted to development of Korean space food. Object of the study is development of food processed technology for long term storage and stability of supply at severe environment such as space, desert, deep sea. Irradiation technology is cold sterilization method, and it is able to fusion with the other food manufacturing and additives using method. Therefore, this study can offer to basic information for development of Korean space food. Side by side, it was expected that preceding results were able to wide utilization extension such as export of cured fermentation food. This study was conducted to evaluate the combined effects of additives (A), N2-packaging (N{sub 2}), mild heating at 60 .deg. C (HT) and gamma irradiation of 25 kGy (IR) at frozen state (F) on the shelf stability and quality of Kimchi during storage at 35 .deg. C for 30 days. Briefly, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of Kimchi. However, sensory quality was decreased. After all, irradiation was conducted at Kimchi samples for quality maintenance after gas exchange packaging method such as N{sub 2}-packaging, quick freezing(-70 .deg. C). Therefore, the combination treatment was effected to insurance of shelf-life and satisfaction of quality. But other methods needed for inhibition deterioration of texture. Calcium lactate and vitamin C were added at Kimchi for prevention of softening, oleoresin paprika and artificial Kimchi flavor were added for improvement of sensory quality decreased by severe sterilization.

Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

OpenAIRE

Roisin P. Corcoran; Steven M. Ross; Beverly J. Irby; Fuhui Tong; Rafael Lara-Alecio; Cindy Guerrero

2014-01-01

This paper describes the use of technology to provide virtual professional development (VPD) for teachers and to conduct classroom observations in a study of English Language Learner (ELL) instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT) design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral l...

Summer Students in Virtual Reality: A Pilot Study on Educational Applications of Virtual Reality Technology.

Science.gov (United States)

Bricken, Meredith; Byrne, Chris M.

The goal of this study was to take a first step in evaluating the potential of virtual reality (VR) as a learning environment. The context of the study was The Technology Academy, a technology-oriented summer day camp for students ages 5-18, where student activities center around hands-on exploration of new technology (e.g., robotics, MIDI digital…

Introducing technology into medical education: two pilot studies.

Science.gov (United States)

George, Paul; Dumenco, Luba; Dollase, Richard; Taylor, Julie Scott; Wald, Hedy S; Reis, Shmuel P

2013-12-01

Educators are integrating new technology into medical curriculum. The impact of newer technology on educational outcomes remains unclear. We aimed to determine if two pilot interventions, (1) introducing iPads into problem-based learning (PBL) sessions and (2) online tutoring would improve the educational experience of our learners. We voluntarily assigned 26 second-year medical students to iPad-based PBL sessions. Five students were assigned to Skype for exam remediation. We performed a mixed-method evaluation to determine efficacy. Pilot 1: Seventeen students completed a survey following their use of an iPad during the second-year PBL curriculum. Students noted the iPad allows for researching information in real time, annotating lecture notes, and viewing sharper images. Data indicate that iPads have value in medical education and are a positive addition to the curriculum. Pilot 2: Students agreed that online tutoring is at least or more effective than in-person tutoring. In our pilot studies, students experienced that iPads and Skype are beneficial in medical education and can be successfully employed in areas such as PBL and remediation. Educators should continue to further examine innovative opportunities for introducing technology into medical education. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Initial Technology Assessment for the Large-Aperture UV-Optical-Infrared (LUVOIR) Mission Concept Study

Science.gov (United States)

Bolcar, Matthew R.; Feinberg, Lee; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

2016-01-01

The NASA Astrophysics Division's 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet/optical/infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for biosignatures via direct-imaging and spectroscopic characterization of habitable exoplanets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV/Optical/Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

Teaching via Mobile Phone: A Case Study on Malaysian Teachers' Technology Acceptance and Readiness

Science.gov (United States)

Ismail, Issham; Bokhare, Siti F.; Azizan, Siti N.; Azman, Nizuwan

2013-01-01

The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers' acceptance of technology could influence their readiness for the pedagogical use…

In the Shadow of Schumpeter: W. Rupert Maclaurin and the Study of Technological Innovation

Science.gov (United States)

Godin, Benoit

2008-01-01

J. Schumpeter is a key figure, even a seminal one, on technological innovation. Most economists who study technological innovation refer to Schumpeter and his pioneering role in introducing innovation into economic studies. However, despite having brought forth the concept of innovation in economic theory, Schumpeter provided few if any analyses…

Technology Readiness of School Teachers: An Empirical Study of Measurement and Segmentation

Science.gov (United States)

Badri, Masood; Al Rashedi, Asma; Yang, Guang; Mohaidat, Jihad; Al Hammadi, Arif

2014-01-01

The Technology Readiness Index (TRI) developed by Parasuraman (2000) was adapted to measure the technology readiness of public school teachers in Abu Dhabi, United Arab Emirates. The study aims at better understanding the factors (mostly demographics) that affect such readiness levels. In addition, Abu Dhabi teachers are segmented into five main…

Information Technology of Study of the State Foreign Debt in Developing Countries

Directory of Open Access Journals (Sweden)

Matvieieva Iuliia M.

2014-03-01

Full Text Available Due to expansion of international relations, growth of interest of states in attraction of foreign capital, appearance of excessive debts and problems connected with them, urgency of the issue of the state foreign debt significantly increased. The problem of state foreign debt is especially sharp in developing countries. Taking into account specific features of functioning of economies of these states, it is necessary to develop information approaches with the aim of studying macro-economic processes, which could assist in creation of improved mechanisms of functioning of the debt policy. The goal of the article is building an information technology of study of the state foreign debt, which would allow conduct of a complex analysis of the studied problem. The article offers a three-stage information technology of study of the state foreign debt, which gives a possibility to analyse and assess the study problem. This article also reveals properties, functions and tasks, which are solve by the information technology. It gives a detailed description of each stage and its notional elements. It forms the structured database for a possibility to carry out an experiment. On the basis of the first stage the article builds econometric models, which reflect interrelations between macro-economic factors, which gives an opportunity to forecast, analyse and assess the state foreign debt.

Different Traditions in the Study of Disciplinarity in Science--Science and Technology Studies, Library and Information Science and Scientometrics

Science.gov (United States)

Milojevic, Staša

2013-01-01

Introduction: Disciplinarity and other forms of differentiation in science have long been studied in the fields of science and technology studies, information science and scientometrics. However, it is not obvious whether these fields are building on each other's findings. Methods: An analysis is made of 609 articles on disciplinarity…

Transition Management: Case Study of an Energy Efficiency Technology Roadmap in Turkey

Directory of Open Access Journals (Sweden)

Şiir Kilkiş

2014-12-01

Full Text Available This paper integrates several streams of literature in transition management and proposes a holistic framework for its application in policy-making. Separate fields of study, such as motors of change and strategic intelligence tools, are unified in a single analytical process. The process involves five steps that may be repeated until a desired policy objective is achieved. The pilot, integrated technology roadmap process that has been launched in Turkey is analyzed as a case study. The Energy Efficiency Technology Roadmap has been completed with the participation of over 160 experts in 5 different stages. It involved the collection of over 349 Delfi statements, their consolidation for a Delfi survey with 16 statements, the analysis of the results, a focal group meeting to develop roadmaps for the 7 selected goals, and the consultation of the roadmaps to the sector. The paper concludes that an integrated technology roadmap process, as described in the pilot case study, provides an advanced version of transition management, which is needed to mobilize research, development, and innovation for sustainable development.

A Delphi Study on Technology Enhanced Learning (TEL) Applied on Computer Science (CS) Skills

Science.gov (United States)

Porta, Marcela; Mas-Machuca, Marta; Martinez-Costa, Carme; Maillet, Katherine

2012-01-01

Technology Enhanced Learning (TEL) is a new pedagogical domain aiming to study the usage of information and communication technologies to support teaching and learning. The following study investigated how this domain is used to increase technical skills in Computer Science (CS). A Delphi method was applied, using three-rounds of online survey…

Technological Monitoring Study Based on Invention Patents of Omeprazoleand Derivatives with Pharmaceutical Applications

Directory of Open Access Journals (Sweden)

Leandra Guimarães de Oliveira

2010-11-01

Full Text Available The current study intends to present the relevance of omeprazole, esomeprazole, rabeprazole, pantoprazole and lansoprazole by means of the technological foresight study, through invention patent documents from Brazilian applicants as indicators of innovation. The European database of patents (Espacenet, Word Patent Index (DERWENT and the Brazilian Patent Base of INPI were used, combining keywords and International Patent Classifications. The major applicants, countries of publication and claims categories were mapped. The 212 patent requests collected are mainly distributed in Chemistry, Pharmacy and Pharmacology areas. The results obtained revealed that the US was the main country with studies directed to this technological area (59 patent applications and the major applicant was the company Astrazeneca AB. Therefore, we can understand that this is a promising technology that may reflect in an increase of R&D activities and patent applications in this area.

Exploring changes in nursing students' attitudes towards the use of technology: A four-wave longitudinal panel study.

Science.gov (United States)

Tubaishat, Ahmad; Aljezawi, Ma'en; Al-Rawajfah, Omar M; Habiballah, Laila; Akhu-Zaheya, Laila M

2016-03-01

It is essential for nursing students to be equipped with the necessary technology skills throughout and after their study period. Their acceptance of this technology depends largely on their attitudes towards technology. To explore the evolution in nursing students' attitudes towards technology, and to determine whether there was a change in participants' formal education in technology over their four years of study. A longitudinal panel study was conducted in a single school of nursing in Jordan. A total of 140 students were followed over their four years of undergraduate study. They completed the same tool (the Technology Attitude Scale) each year, to capture any changes in their attitudes towards technology across the years. In all four waves of data collection, students showed positive attitudes towards technology, with the highest attitude scores being in their final year (M=6.19, SD=0.72). As the students spent more time on their nursing education, they were found to have a more positive attitude. Thus, a strong positive relationship existed between this formal education in technology and attitudes: as the students' education in technology increased, their attitudes were more positive. A remarkable development in students' attitudes towards technology is reported in this study. The positive attitudes displayed by the students should be enhanced by providing technology-related subjects during their studies in nursing schools at a very early stage. Copyright © 2015 Elsevier Ltd. All rights reserved.

Artist concept of Mercury program study of medical effects and technology

Science.gov (United States)

1964-01-01

Artist concept of Mercury program study of medical effects and technology development. Drawing depicts cut-away view of Mercury capsule orbiting the Earth, showing the astronaut and his capsule's hardware.

Why don't girls choose technological studies? Adolescents' stereotypes and attitudes towards studies related to medicine or engineering.

Science.gov (United States)

López-Sáez, Mercedes; Puertas, Susana; Sáinz, Milagros

2011-05-01

Gender differences in choice of studies emerge already in adolescence. Two studies with adolescents are presented, the goal of which is to explore the influence of gender by assessing males and females who choose studies related to Medicine or Engineering. Study 1, correlational (N = 330, mean age 15.9, 56.7% girls), shows that girls who choose technology are more poorly appraised than girls who choose other studies. Study 2 (N = 130; mean age 16.77, 56.2% girls), experimental, measures implicit attitudes (using the IAT) towards males and females from Medicine and Engineering. Implicit attitudes are more favorable towards women if they are studying Medicine and towards men if they study Engineering. The results are analyzed with relation to the percentages of boys and girls in the different fields of study.

The Application of KINECT Motion Sensing Technology in Game-Oriented Study

Directory of Open Access Journals (Sweden)

Hui Yu Yang

2014-03-01

Full Text Available The learning environment based on the KINECT Motion Sensing technology is able to fully mobilize the learners' multi-sensory organs, closely combine study with sports and enhance human-computer interactions, which can be conducive to the learners' health, greatly increase the relishes of learning and promote effective learning in the game, and finally compensate for the shortage of human-computer interactions in the traditional mouse and keyboard mode. The article elaborates on the KINECT Motion Sensing Technology and its educational applications status by analyzing its effective supports for game-oriented studying environment, based on which the article establishes a game-oriented learning environment. Eventually the article reveals an applicable case of game-oriented teaching and learning as a reference for related researches.

Digital Libraries with Embedded Values: Combining Insights from LIS and Science and Technology Studies

Science.gov (United States)

Fleischmann, Kenneth R.

2007-01-01

In the digital age, libraries are increasingly being augmented or even replaced by information technology (IT), which is often accompanied by implicit assumptions of objectivity and neutrality, yet the field of science and technology studies (STS) has a long history of studying what values are embedded in IT and how they are embedded. This article…

Science, Technology and Social Change Course's Effects on Technological Literacy Levels of Social Studies Pre-Service Teachers

Science.gov (United States)

Yigit, E. Ozlem

2013-01-01

Social studies curricula are required in order to prepare to educate children who continue to learn after their formal training, and it is vital that teachers receive an education properly. In Social Studies Education Departments of Education Faculties Science, Technology and Social Change course is convenient to this aim and it contributes to…

Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) concept definition study

Science.gov (United States)

Hughes, C. W.

1983-01-01

Studies were conducted by Hughes Helicopters, Inc. (HHI) for the Applied Technology Laboratory and Aeromechanics Laboratory, U.S. Army Research and Technology Laboratories (AVRADCOM) and the Ames Research Center, National Aeronautics and Space Administration (NASA). Results of predesign studies of advanced main rotor hubs, including bearingless designs, are presented in this report. In addition, the Government's rotor design goals and specifications were reviewed and evaluated. Hub concepts were designed and qualitatively evaluated in order to select the two most promising concepts for further development. Various flexure designs, control systems, and pitchcase designs were investigated during the initial phases of this study. The two designs selected for additional development were designated the V-strap and flat-strap cruciform hubs. These hubs were designed for a four bladed rotor and were sized for 18,400 pounds gross weight with the same diameter (62 feet) and solidity (23 inch chord) as the existing rotor on the Rotor Systems Research Aircraft (RSRA).

An Ethnographic Study of Chinese Heritage Language Education and Technological Innovations

Directory of Open Access Journals (Sweden)

Minjuan Wang

2004-01-01

Full Text Available Research has increasingly uncovered the cognitive, cultural, and economic advantages of bilingualism and the positive impact of heritage language on children's second language acquisition (M:cLaughlin, 1995. As one type of heritage language education organizations, Chinese language schools have been in existence for decades in the U.S., but their practices have remained informal and not readily accessible to people from other cultures. In order to bridge this gap, this ethnographic study illustrates family and community involvement in promoting language proficiency in heritage language populations and explores language education methods practiced in Chinese community language schools in an urban Southern California area. The study examines the intricate issues affecting heritage language learning and explores the potential uses of technology in assisting young learners in acquiring their heritage language (Chinese. In addition, the study generates guidelines for adapting existing technology-assisted language programs (e.g., the Chinese Cultural Crystals for instructional uses.

Study On Technology Based Home Vision Screening And Creating Awareness On Eye Health

Directory of Open Access Journals (Sweden)

Nirav Mehta

2015-08-01

Full Text Available Introduction Technology is one of most important factor in todays life. IPAD is leading as people can make use of technology by just pressing buttons. Networking technology and education makes communication easier and helps people in easy education and awareness. Aim amp objectives The main aim of the study is to educate and aware among people regarding eye health and the check the visual function of their eye by using Apple I pad. Material and Methodology The following study is a home based vision screening program using IPAD which uses the basic tests like visual acuity color vision contrast sensitivity and amsler tests for checking the basic functions of the eye. The study was performed in many societies moving from one place to another using IPAD as a tool. Reliability of ipad was checked a pilot study on 25 subjects visual acuity colour vision and contrast sensitivity was taken on both ipad and Original chart like snellen ishihara and pellirobson and compared in which the results and the accuracy were same. The study also contains questionnaire on the awareness and education about eye health. The subjects included in the study were an age group of 10 to 70. Subjects like infants and blind were not included in the study. Results During the study it was observed that there is no significant difference in testing of visual acuity between ipad and Snellen standard chart. The subjects responded actively towards screening and that home vision screening can be possible. During the study it was found that 40 subjects out of 100 needed further detailed check-up and were referred in Rotary eye hospital hospital but only 3 out of 40 came for it. This shows that they are less aware and education about their eye health. Software used in IPAD were visual acuity color vision contrast sensitivity and amsler tests A questionnaire was also asked which indicated less awareness among the common people. Conclusion We examined with just an ipad and not an

Teachers as Participatory Designers: Two Case Studies with Technology-Enhanced Learning Environments

Science.gov (United States)

Cober, Rebecca; Tan, Esther; Slotta, Jim; So, Hyo-Jeong; Könings, Karen D.

2015-01-01

Teachers are not typically involved as participatory designers in the design of technology-enhanced learning environments. As they have unique and valuable perspectives on the role of technology in education, it is of utmost importance to engage them in a participatory design process. Adopting a case study methodology, we aim to reveal in what…

Science and Technology for the Future Force. FY2006 Summer Study

National Research Council Canada - National Science Library

Adler, E. A; Herrera, Gilbert V; Otstott, Charles

2007-01-01

.... The ASB approach to the study looked at five specific areas of Army response to S&T challenges: Strategic Outreach, Cross-Cutting Initiatives, Gap Analysis Process, Technology Transition, and Strategic Management...

Indicators of creativity in a technology class: a case study

African Journals Online (AJOL)

study we investigated how learners demonstrate creativity whilst en- gaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data collection. From this data, indicators of creativity emerged. Schools must encourage learners to be creative ...

Modern standardization case studies at the crossroads of technology, economics, and politics

CERN Document Server

Schneiderman, R

2015-01-01

Modern Standardization -- Case Studies at the Crossroads of Technology, Economics, and Politics covers the development of new technical standards, how these standards are typically triggered, and how they are submitted to standards development organizations (SDOs) for review and evaluation. It fills the gap in the shortage of reference material in the development of real-world standards. The increasing pace of innovation in technology has accelerated the competitive nature of standardization, particularly in emerging markets. Modern Standardization addresses these and other issues through a series of case studies in a format designed for academics and their engineering, business, and law school students.

Coal use and coal technology study (KIS)

International Nuclear Information System (INIS)

Kram, T.; Okken, P.A.; Gerbers, D.; Lako, P.; Rouw, M.; Tiemersma, D.N.

1991-11-01

The title study aims to assess the possible role for coal in the Netherlands energy system in the first decades of the next century and the part new coal conversion technologies will play under various conditions. The conditions considered relate to (sectoral) energy demand derived from national scenarios in an international context, to energy prices, to environmental constraints (acidification, solid waste management and disposal) and to the future role for nuclear power production. Targets for reduction of greenhouse gas emissions are not explicitly included, but resulting CO 2 emissions are calculated for each variant case. The part that coal can play in the Dutch energy supply is calculated and analyzed by means

Cost studies of thermally enhanced in situ soil remediation technologies

International Nuclear Information System (INIS)

Bremser, J.; Booth, S.R.

1996-05-01

This report describes five thermally enhanced technologies that may be used to remediate contaminated soil and water resources. The standard methods of treating these contaminated areas are Soil Vapor Extraction (SVE), Excavate ampersand Treat (E ampersand T), and Pump ampersand Treat (P ampersand T). Depending on the conditions at a given site, one or more of these conventional alternatives may be employed; however, several new thermally enhanced technologies for soil decontamination are emerging. These technologies are still in demonstration programs which generally are showing great success at achieving the expected remediation results. The cost savings reported in this work assume that the technologies will ultimately perform as anticipated by their developers in a normal environmental restoration work environment. The five technologies analyzed in this report are Low Frequency Heating (LF or Ohmic, both 3 and 6 phase AC), Dynamic Underground Stripping (DUS), Radio Frequency Heating (RF), Radio Frequency Heating using Dipole Antennae (RFD), and Thermally Enhanced Vapor Extraction System (TEVES). In all of these technologies the introduction of heat to the formation raises vapor pressures accelerating contaminant evaporation rates and increases soil permeability raising diffusion rates of contaminants. The physical process enhancements resulting from temperature elevations permit a greater percentage of volatile organic compound (VOC) or semi- volatile organic compound (SVOC) contaminants to be driven out of the soils for treatment or capture in a much shorter time period. This report presents the results of cost-comparative studies between these new thermally enhanced technologies and the conventional technologies, as applied to five specific scenarios

Economic Feasibility Study for Using Irradiation Technology in Preservation of Animalism Foods

International Nuclear Information System (INIS)

El Gameel, E.A.

2011-01-01

The present study discus the economic feasibility for the preservation animalism foods by using irradiation technology. This study has included the technical data, regression foretelling for the throughput, determination of irradiators types and radiation sources activity. This study comprises the financial analysis for the establishment animalism foods irradiation facilities (types: tote box, pallet conveyor) and the national return

Technology Evaluation Report 17. Videoconferencing in Theatre and Performance Studies

Directory of Open Access Journals (Sweden)

Mark Childs

2003-04-01

Full Text Available Previous reports in this series have indicated the growing acceptance of video-conferencing in education delivery. The current report compares a series of video-conferencing methods in an activity requiring precision of expression and communication: theatre and performance studies. The Accessing and Networking with National and International Expertise (ANNIE project is a two-year project undertaken jointly by the University of Warwick and the University of Kent at Canterbury, running from March 2001 to March 2003. The project's aim is to enhance students' learning experience in theatre studies by enabling access to research-based teaching and to workshops led by practitioners of national and international standing. Various technologies have been used, particularly ISDN video-conferencing, computer-mediated conferencing, and the Internet. This report concludes that video-conferencing methods will gain acceptance in education, as academic schools themselves are able to operate commonly available technology the assistance of specialised service units.

The study of the HTGR technology and its industry applications

International Nuclear Information System (INIS)

Lu Yingzhong; Wang Dazhong; Zhong Daxin

1987-01-01

This paper summarizes the progress and main results of R and D on High Temperature Reactor technology in INET of Tsinghua University. Several HTR design studies have been carried out and briefly introduced in this paper. While the primary study of the modular HTR process steam application in heavy oil recovery is discussed. A lot of experiments and developmental work, e.g., some HTR component experiments, fuel and material developments have been done, and the major progresses are briefed. (author)

A study of factors affecting the adoption of server virtualization technology

Science.gov (United States)

Lu, Hsin-Ke; Lin, Peng-Chun; Chiang, Chang-Heng; Cho, Chien-An

2018-04-01

It has become a trend that worldwide enterprises and organizations apply new technologies to improve their operations; besides, it has higher cost and less flexibility to construct and manage traditional servers, therefore the current mainstream is to use server virtualization technology. However, from these new technology organizations will not necessarily get the expected benefits because each one has its own level of organizational complexity and abilities to accept changes. The researcher investigated key factors affecting the adoption of virtualization technology through two phases. In phase I, the researcher reviewed literature and then applied the dimensions of "Information Systems Success Model" (ISSM) to generalize the factors affecting the adoption of virtualization technology to be the preliminary theoretical framework and develop a questionnaire; in phase II, a three-round Delphi Method was used to integrate the opinions of experts from related fields which were then gradually converged in order to obtain a stable and objective questionnaire of key factors so that these results were expected to provide references for organizations' adoption of server virtualization technology and future studies.

Comparison Study of Three Common Technologies for Freezing-Thawing Measurement

Directory of Open Access Journals (Sweden)

Xinbao Yu

2010-01-01

Full Text Available This paper describes a comparison study on three different technologies (i.e., thermocouple, electrical resistivity probe and Time Domain Reflectometry (TDR that are commonly used for frost measurement. Specially, the paper developed an analyses procedure to estimate the freezing-thawing status based on the dielectric properties of freezing soil. Experiments were conducted where the data of temperature, electrical resistivity, and dielectric constant were simultaneously monitored during the freezing/thawing process. The comparison uncovered the advantages and limitations of these technologies for frost measurement. The experimental results indicated that TDR measured soil dielectric constant clearly indicates the different stages of the freezing/thawing process. Analyses method was developed to determine not only the onset of freezing or thawing, but also the extent of their development. This is a major advantage of TDR over other technologies.

A framework for reporting on human factor/usability studies of health information technologies

NARCIS (Netherlands)

Peute, Linda W.; Driest, Keiko F.; Marcilly, Romaric; Bras Da Costa, Sabrina; Beuscart-Zephir, Marie-Catherine; Jaspers, Monique W. M.

2013-01-01

Increasingly, studies are being published on the potential negative effect of introducing poor designed Health Information Technology (HIT) into clinical settings, relating to technology-induced errors and adverse events. Academic research on HIT design and evaluation is an extremely important

Indicators of creativity in a technology class: a case study ...

African Journals Online (AJOL)

Teachers seem to lack the skills and knowledge needed to recognise when creativity is taking place. In this study we investigated how learners demonstrate creativity whilst engaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data ...

Media business transformation based on information technology : A pilot study of three Swedish newspapers

OpenAIRE

Sadat Alavioon, Samin

2017-01-01

The newspaper industry has been transformed after the emergence of information technology. According to the transformation of media businesses by technology advancement this study realizes the importance of opportunities and threats brought by new information technology in the newspaper industry. Therefore, to develop an understanding of how the newspaper industry can transform due to technology advancement three research questions were answered; RQ 1. How can information technologies transfo...

A Study Of The Internet Of Things And Rfid Technology: Big Data In Navy Medicine

Science.gov (United States)

2017-12-01

technology on electrical power poses a threat to hospitals as well. In the event a power failure either from natural or nefarious purposes, the...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT A STUDY OF THE INTERNET OF THINGS AND RFID TECHNOLOGY ...December 2017 3. REPORT TYPE AND DATES COVERED MBA professional report 4. TITLE AND SUBTITLE A STUDY OF THE INTERNET OF THINGS AND RFID TECHNOLOGY : BIG

Thermal treatment technology study and data base for Department of Energy mixed waste

International Nuclear Information System (INIS)

Gillins, R.L.; Steverson, E.M.; Balo, K.A.

1991-01-01

The Department of Energy (DOE) has a wide variety of waste streams that must be treated to meet various regulations before final disposal. One category of technologies for treating many of these waste streams is thermal treatment. A study of known thermal treatment technologies was conducted to aid DOE in the development of strategies to meet its waste management needs. The study was specifically addressed to mixed waste, but it is also applicable to hazardous and radioactive wastes. The data collected in the study, along with other waste management data, are being included in a comprehensive data base that DOE is developing. 3 refs., 1 fig

Foresight Study on the Risk Governance of New Technologies: The Case of Nanotechnology.

Science.gov (United States)

Read, Sheona A K; Kass, Gary S; Sutcliffe, Hilary R; Hankin, Steven M

2016-05-01

Technology-led innovation represents an important driver of European economic and industrial competitiveness and offers solutions to societal challenges. In order to facilitate responsible innovation and public acceptance, a need exists to identify and implement oversight approaches focused on the effective risk governance of emerging technologies. This article describes a foresight study on the governance of new technologies, using nanotechnology as a case example. Following a mapping of the governance landscape, four plausible foresight scenarios were developed, capturing critical uncertainties for nanotechnology governance. Key governance elements were then stress tested within these scenarios to see how well they might perform in a range of possible futures and to inform identification of the strengths, weaknesses, opportunities, and threats for nanotechnology governance in Europe. Based on the study outcomes, recommendations are proposed regarding the development of governance associated with the responsible development of new technologies. © 2015 Society for Risk Analysis.

Explaining experience curves for new energy technologies. A case study of liquefied natural gas

International Nuclear Information System (INIS)

Greaker, Mads; Lund Sagen, Eirik

2008-01-01

Many new energy technologies seem to experience a fall in unit price as they mature. In this paper we study the unit price of liquefying natural gas in order to make it transportable by ship to gas power installations all over the world. Our point of departure is the experience curve approach, however unlike many other studies of new energy technologies, we also seek to account for autonomous technological change, scale effects and the effects of upstream competition among technology suppliers. To our surprise we find that upstream competition is by far the most important factor contributing to the fall in unit price. With respect to the natural gas business, this may have implications for the future development in prices as the effect of increased upstream competition is temporary and likely to weaken a lot sooner than effects from learning and technological change. Another more general policy implication, is that while promoting new energy technologies, governments must not forget to pay attention to competition policy. (author)

Influence of Transformational Leadership Style on Decision-Making Style and Technology Readiness: A Correlation Study

Science.gov (United States)

Mueller, Crystal A.

2009-01-01

The research addressed the problem of technology initiatives failing to meet organizational objectives. The purpose of the quantitative correlation study was to determine the relationship between transformational leadership styles, decision-making styles, and technology readiness. The findings of the study answered research questions in three…

Accessing best practice resources using mobile technology in an undergraduate nursing program: a feasibility study.

Science.gov (United States)

Mann, Elizabeth G; Medves, Jennifer; Vandenkerkhof, Elizabeth G

2015-03-01

Mobile technology presents new opportunities for nursing education and ultimately the provision of nursing care. The aim of this study was to explore the utility of mobile technology in undergraduate nursing education. In this evaluation study, undergraduate nursing students were provided with iPod Touch devices containing best practice guidelines. Computer self-efficacy was assessed, and the Theory of Planned Behavior was used to identify potential predictors of the use of mobile technology. Questionnaires were completed at baseline (n = 33) and postimplementation (n = 23). Feedback on feasibility issues was recorded throughout the study period. Students generally found the devices useful, and few technical problems were identified; however, lack of skill in using the devices and lack of support from staff in the clinical setting were commonly identified issues. Self-efficacy scores were high throughout the study. Attitudes, perceptions of the desirability of use, perceived personal control over use, and intentions of using the device were lower postimplementation than at baseline. Attitude toward the technology predicted intention to use the device after graduation. Mobile technology may promote evidence-informed practice; however, supporting students' acquisition of related skills may optimize use. Successful integration of mobile technology into practice requires attention to factors that affect student attitudes.

Power Factor Study Reduces Energy Costs at Aluminum Extrusion Plant: Office of Industrial Technologies (OIT) BestPractices Aluminum Technical Case Study

International Nuclear Information System (INIS)

2001-01-01

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects

How to Create Business Value through Information Technology (A Case Study on Automotive Production

Directory of Open Access Journals (Sweden)

Kamran Feizi

2018-03-01

Full Text Available This study aimed at designing information technology business value model in order to explain the value of information technology in business and evaluate information technology contribution in organization function. For the purpose of a comprehensive analysis of the subject using qualitative data, the research method was set to be mixed method focusing on qualitative sequential design. The first stage of the research strategy was an exploratory single case study and for the second phase, the researchers used focus groups design. Saipa Corporation, one of the most famous firms in Iranian automotive industry, was selected as the case. The varied qualitative date were gathered through interview, document review and observation methods and were analyzed afterwards. Ultimately, the findings of the study highlighted the items and dimensions of information technology business value. This model is composed of the relationship between different dimensions of the theoretical models regarding and the share of information technology in building a business. In order to ensure research generalizability, the results of the research were compared with those in the literature review and the theoretic adequacy of the proposed framework was confirmed.

Water Desalination Studies Using Forward Osmosis Technology, A Review

International Nuclear Information System (INIS)

Abou El-Nour, F.H.

2016-01-01

Fresh water and energy shortage represent a great challenge facing the whole world now. To cover the global water demand, an energy-efficient approach is required to be applied in the suitable technology to achieve the shortage in the fresh water demand. Different techniques are used to solve this problem. A mong the different methods applied to desalinate seawater is the osmosis technologies . Although reversible osmosis (RO) is the most familiar method used for this purpose, forward osmosis (FO) represents a more suitable technique due to several arguments including low energy cost. The present study represents the use of FO technique for water desalination with adsorption regeneration. In this respect, a self-prepared granular active carbon produced from dates is to be used as an adsorbent agent. The physical characteristics of the active carbon are studied such as BET specific surface area, pore size, particle size and the structure using scanning electron microscope (SEM). Different advanced apparatus are used for such measurements. In addition, the adsorption is otherms (Langmuier and Freundlich) are established to explain the adsorption mechanism of the process. Accordingly, the review includes essential information and sufficient backgrounds in the field of desalination using FO or simply direct osmosis, which overcome the different difficulties present in reversible RO

Study on mineral processing technology for abrasive minerals

Energy Technology Data Exchange (ETDEWEB)

Hong, Seong Woong; Yang, Jung Il; Hwang, Seon Kook; Choi, Yeon Ho; Cho, Ken Joon; Shin, Hee Young [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

1995-12-01

Buyeo Materials in Buyeogun, Choongnam province is a company producing feldspar concentrate, but does not yet utilize the garnet as abrasive material and other useful heavy minerals wasted out from the process of feldspar ore. The purpose of this study is to develop technology and process for the recovery of garnet concentrate. As results, the garnet is defined as ferro manganese garnet. The optimum process for recovery of garnet concentrate is to primarily concentrate heavy minerals from tailings of feldspar processing. And secondly the heavy minerals concentrated is dried and separated garnet concentrate from other heavy minerals. At this time, the garnet concentrate is yield by 0.176%wt from 0.31%wt of heavy minerals in head ore. The garnet concentrate contains 33.35% SiO{sub 2}, 12.20% Al{sub 2}O{sub 3}, 28.47% Fe{sub 2}O{sub 3}, 11.96% MnO. As for utilization of abrasive materials, a fundamental data was established on technology of grinding and classification. (author). 13 refs., 47 figs., 24 tabs.

The role of nuclear data for fusion technology studies

International Nuclear Information System (INIS)

Forrest, Robin A.

2011-01-01

Highlights: → Nuclear data are of fundamental importance in studies of nuclear technology. → Data libraries cover: experiments (EXFOR), theory (RIPL) and evaluations (ENDF). → Libraries are general purpose or special purpose (decay, dosimetry and activation). → Activation files contain many reactions, only a fraction needs to be known precisely. → Covariance data are important, but details of formatting are being worked out. - Abstract: Nuclear data are of fundamental importance in studies of nuclear technology. In these studies, experiments to measure cross sections and decay properties and simulations of the design of fission power plants, fusion devices and accelerators are included. The large amount of data required is stored in computer readable formats in data libraries and the most common of these are the general purpose files used for neutronics or transport calculations. These files also contain the standards against which most measurements are made. The other class of libraries are the special purpose ones containing decay data, fission yields and cross section data for dosimetry and activation. This paper gives examples of what data are available and describes their use for various fusion applications. The focus will be on neutron-induced activation data with examples of how the reactions of particular importance can be identified. All data should be accompanied by estimates of the uncertainty. This is best achieved by including covariance data; however, this is extremely challenging and only a subset of the available data has such uncertainty data. The general principles of how covariance matrices are used are outlined.

Technology as a Time Challenge: Study, Concept and Types of Technology

Directory of Open Access Journals (Sweden)

Vadim M. Rozin

2017-09-01

Full Text Available In the article divorce the concepts of engineering and technology. Designated four stages of technological development: the fi rst phase — “pilot technique”, it is characterized by magical conceptualization, the second — engineering (rational conceptualization, third design, fourth technology. For technical equipment is characterized by four features: technology is the artifacts, the technique can be considered as a “social body” of a person or society, technology is a useful way to use the forces of nature, and fi nally, the mediation in the form of tools, machines, and material environment that allows you to implement the ideas of man. It is argued that the conceptualization of technology is the essential characteristic of the concept. If you write, for example, about the technology of the Neolithic age or era of construction of the Egyptian pyramids, then we are talking about retrospective interpretation, from the point of view of modern understanding of technology. It’s not useless, for example, to determine preconditions of formation technology, but in terms of thinking creates problems and contradictions. The author argues that technology develops in the second half of the eighteenth century as a new reality, which describes the industrial activities in language operations and their conditions of division of labor and management. At the same time, technology is being characterized by the installation of quality, savings, standardization, and rational description of the production processes, their optimization for the training of new technologists. Discusses three stages of development of the technology and features of the main types of technology: production technology, engineering, large techno-social projects, global technology. Considering the author and the conditions of the development of new technologies. These include “technological zone of proximal development”, as well as two situation — relevant issues and

Practice Theory and Pragmatism in Science & Technology Studies

DEFF Research Database (Denmark)

Buch, Anders

2015-01-01

begin by an introduction to some of the proponents of practice theory and of pragmatism. Regarding the latter, I primarily present work by Dewey because this is what I am most familiar with. Although I recognize that practice theory and pragmatism differ on fundamental philosophical issues in relation...... to the normative evaluation of action, I show that the two intellectual traditions have much in common when it comes to what they do to STS studies. After this introduction to practice theory, my paper will proceed in the following steps. Firstly, I will briefly survey practice theoretical and pragmatist......Science & Technology Studies (STS) and social science has made a turn, a ‘practice turn’, and the notion ‘practice theory’ has made its way into the field of STS. But it is notable that proponents of this turn and theory rarely mention American pragmatism as a source of inspiration or refer...

Human Capital Efficiency and Firm Performance: An Empirical Study on Malaysian Technology Industry

Directory of Open Access Journals (Sweden)

Rahim Azlina

2017-01-01

Full Text Available This study examined the relationship between human capital efficiency and firm’s performance in Malaysian technology industry. Using accounting data, this study reviewed annual reports of all technology companies listed under Main Market and Ace Market of Bursa Malaysia in year 2009. The study applied Value Added Intellectual Coefficient (VAICTM methodology developed by Ante Pulic to measure human capital efficiency. The results showed that there was not much difference in terms of human capital efficiency between the Main Market and Ace Market. Results from correlation analysis indicate that human capital efficiency has significant and positive relation with firm’s performance. Findings from this study may be useful to companies’ managers to make better decision pertaining to the proper deployment of their strategic asset, namely human capital.

Study of the Accelerator Technology Development for Cancer Radiotherapy

International Nuclear Information System (INIS)

Sudjatmoko; Triyono; E-Supriyatni

2000-01-01

The hadronic particle beams including both protons, neutrons and charged particles have been studied for cancer therapy by a number of research centers in several countries during the past two decades. In this paper is briefly discussed concerning the accelerator type and its applications. The future trends are seen in the new technological developments like the use of proton gantries, beam scanning techniques, improved patient handling system and in the increasing precision of treatment. (author)

Towards a Differentiated and Domain-Specific View of Educational Technology: An Exploratory Study of History Teachers' Technology Use

Science.gov (United States)

Voet, Michiel; De Wever, Bram

2017-01-01

Adopting a differentiated and domain-specific view of educational technology, the present study focuses on the case of school history. It argues that, in this particular context, one of technology's main assets is its ability to support inquiry-based learning activities, during which students interpret the past through historical reasoning. As…

A study on the assessment of treatment technologies for efficient remediation of radioactively-contaminated soil

Energy Technology Data Exchange (ETDEWEB)

Song, Jong Soon; Shin, Seung Su; KIm, Sun Il [Chosun University, Gwangju (Korea, Republic of)

2016-09-15

Soil can be contaminated by radioactive materials due to nuclide leakage following unexpected situations during the decommissioning of a nuclear power plant. Soil decontamination is necessary if contaminated land is to be reused for housing or industry. The present study classifies various soil remediation technologies into biological, physics/chemical and thermal treatment and analyzes their principles and treatment materials. Among these methods, this study selects technologies and categorizes the economics, applicability and technical characteristics of each technology into three levels of high, medium and low by weighting the various factors. Based on this analysis, the most applicable soil decontamination technology was identified.

Expanding the classroom with educational technology: A case study of a Cuban polytechnic high school

Directory of Open Access Journals (Sweden)

Anne Leftwich

2014-12-01

Full Text Available Polytechnic instruction has a common place in the Cuban education system (Gasperini, 2000. In polytechnic institutions, teachers leverage technological tools to prepare students for labor market competences. This case study examined a polytechnic institution in Cuba to consider how teachers defined educational technology. Based on teacher questionnaire responses, site-based teacher interviews, and field observations, technology was primarily viewed as a method for student preparation. In other words, teachers used technology to prepare students for their future careers and the technology they will need to be successful in that career. The study found that teachers highly valued their technical pedagogical training, believed that the growing spaces were an integral part of their technology based instruction, and claimed that the limited resources was their greatest barrier to integrating ICT in the classroom.

A Study on Test Technology to Diagnose the Power Apparatus

Energy Technology Data Exchange (ETDEWEB)

Kim, K H; Kang, Y S; Jeon, Y K; Lee, W Y; Kang, D S; Kyu, H S; Sun, J H; Jo, K H [Korea Electrotechnology Research Institute (Korea, Republic of); Jung, J S; Mun, Y T; Lee, K H; Jung, E H; Kim, J H [Korea Water Resources Corporation (Korea, Republic of)

1997-02-01

In this study, we have educated KOWACO(Korea Water Resources Corporation) specialists about the insulation diagnostic technology and trained them the insulation diagnostic test and estimation method of power apparatus. The main results of this study are as follows; A. Education of basic high-voltage engineering. B. Research of insulation characteristic and deterioration mechanism in power apparatus C. Discussion on high-voltage test standard specifications. D. Study on insulation deterioration diagnostics in power apparatus. E. Field testing of insulation diagnosis in power apparatus. F. Engineering of insulation diagnostic testing apparatus to diagnose power apparatus. KOWACO specialists are able to diagnose insulation diagnostic test of power apparatus through this study. As they have instruments to diagnose power apparatus, they can do the test and estimation of the power apparatus insulation diagnosis. (author). refs., figs., tabs.

Case Study – Idling Reduction Technologies for Emergency Service Vehicles

Energy Technology Data Exchange (ETDEWEB)

Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-01-01

This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

Educational Technology Adopters: A Case Study in University of Botswana

Science.gov (United States)

Dintoe, Seitebaleng Susan

2018-01-01

Although University of Botswana implemented national ICT policies and trained the lecturers to use educational technology, there was low-level use of eLearning in teaching and learning. In this regard, qualitative case study approach was used to explore and specifically focus on one aspect of the phenomenon; that is, the University of Botswana as…

Determining student teachers' perceptions on using technology via Likert scale, visual association test and metaphors: A mixed study

Directory of Open Access Journals (Sweden)

Mevhibe Kobak

2013-04-01

Full Text Available The aim of this study is to determine senior student teachers’ perceptions on using technology by approaching various points of view. In this study, researchers collected data through Technology Perceptions Scale, Visual Association Activity and Technology Metaphors. The participants of the study were 104 senior student teachers who were enrolled in Balıkesir University Necatibey Faculty of Education. In this descriptive study, researchers interpreted qualitative data in conjunction with quantitative data. Based on the data obtained, even though student teachers’ perceptions on using technology were found positive in the light of Likert scale, there was no significant relation in terms of gender and enrolled undergraduate program. According to the results of visual association test, student teachers ranked smartboard, Internet and computer in the first three, and portable media player, mobile phone and video/camera in the last three. Besides, researchers analyzed and classified student teachers’ metaphors about technology under 9 categories: 1developing-changing technology, 2rapidly progressing technology, 3 limitless-endless technology, 4beneficial technology, 5harmful technology, 6both beneficial and harmful technology, 7indispensible technology, 8technology as a necessity, 9 all-inclusive technology. At the end of the study, those nine categories which were acquired using the content analysis technique are presented in a table which shows the interaction between categories in a holistic view.

Study and practice of flipped classroom in optoelectronic technology curriculum

Science.gov (United States)

Shi, Jianhua; Lei, Bing; Liu, Wei; Yao, Tianfu; Jiang, Wenjie

2017-08-01

"Flipped Classroom" is one of the most popular teaching models, and has been applied in more and more curriculums. It is totally different from the traditional teaching model. In the "Flipped Classroom" model, the students should watch the teaching video afterschool, and in the classroom only the discussion is proceeded to improve the students' comprehension. In this presentation, "Flipped Classroom" was studied and practiced in opto-electronic technology curriculum; its effect was analyzed by comparing it with the traditional teaching model. Based on extensive and deep investigation, the phylogeny, the characters and the important processes of "Flipped Classroom" are studied. The differences between the "Flipped Classroom" and the traditional teaching model are demonstrated. Then "Flipped Classroom" was practiced in opto-electronic technology curriculum. In order to obtain high effectiveness, a lot of teaching resources were prepared, such as the high-quality teaching video, the animations and the virtual experiments, the questions that the students should finish before and discussed in the class, etc. At last, the teaching effect was evaluated through analyzing the result of the examination and the students' surveys.

Impact of wearable technology on psychosocial factors of osteoarthritis management: a qualitative study.

Science.gov (United States)

Belsi, Athina; Papi, Enrica; McGregor, Alison H

2016-02-03

To identify the impact the use of wearable technology could have in patients with osteoarthritis in terms of communication with healthcare providers and patients' empowerment to manage their condition. Qualitative study using focus groups with patients with osteoarthritis; data from patients' responses were analysed using Framework Methodology. 21 patients with knee osteoarthritis from the London area (age range 45-65 years) participated in a total of four focus groups. Recruitment continued until data saturation. The study was conducted in a university setting. Patients' responses suggested a positive attitude on the impact wearable technology could have on the management of osteoarthritis. It was perceived that the use of wearable devices would benefit patients in terms of feeling in control of their condition, providing them with awareness of their progress, empowering in terms of self-management and improving communication with their clinician. This paper suggests positive patient perspectives on the perceived benefits wearable technology could have on the management of osteoarthritis. The data that could be collected with the use of wearable technology could be beneficial both to patients and clinicians. The information obtained from this study suggests that introducing wearable technology into patient-centred care could enhance patient experience in the field of osteoarthritis and beyond. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Technological feasibility studies on combination treatments for subtropical fruits

International Nuclear Information System (INIS)

Brodrick, H.T.; Linde, H.J. van der

1981-01-01

Research with subtropical fruits such as papayas and mangoes had advanced beyond the experimental stage in South Africa. This may be attributed to the potential economic benefits likely to be obtained from the combination of heat and irradiation treatments. The outcome of recent marketing trials, however, revealed several problem areas which need further investigation. Some of these problems were studied in greater detail and are reported in this presentation. The effect of time delays between hot-water and irradiation treatments on the efficacy in disease control in the fruit, has received particular attention in the investigations. Efforts have also been made to correlate these results with those obtained in fungal studies in the laboratory. These and other factors relating to the technological feasibility in the use of combined treatments for the preservation of mangoes and papayas are discussed and recommendations or guidelines for future studies are given in this paper. (author)

What Teachers Want: A Differentiated Technology Integration Coaching Model Examined through a Self-Study Framework

Science.gov (United States)

Hatten, Stephanie Hinshaw

2014-01-01

The purpose of this a narrative self-study is to explore the actions taken by a Technology Instructional Specialist to determine which actions are most beneficial for teachers integrating technology in the elementary classroom. The study uses interviews, observations, and journaling of events occurring with six teachers at three different…

Study of technological features of tubular compressed concrete members in concreting

Directory of Open Access Journals (Sweden)

Voskobiinyk Olena

2017-01-01

Full Text Available The technological features of core concreting were analyzed as the main factor in ensuring of strength and reliability of compressed concrete-filled steel tubular (CFST members. We have conducted the analysis of existing concreting methods of CFST members. In this respect, the most dangerous types of possible technological defects of concrete core of CFST members are inhomogeneity along the height, voids, caverns, and concrete “weak spots”. The authors considered the influence of such technological factors of concreting: placeability, time, concrete mixture compaction method, concreting height on the concrete core strength of CFST members. Based on the experimental studies conducted we suggested the regression correlations for determining the concrete strength of CFST members of different length depending on the movability of concrete mixture and a time for its compaction. The authors performed the correlation analysis of technological factors of concreting on the strength of the concrete core. We carried out the comparison of data on the concrete core strength of CFST members, that were determined by non-destructive methods (sclerometer test results, ultrasonic method and direct compression strength tests. We experimentally proved that using movable mixtures with the slump of about 4 – 9 cm the overall variation coefficient of concrete core strength of CFST members along the height reaches nearly 13%. Based on the experimental studies conducted we suggested the guidelines on optimal regimes of concrete compaction during manufacturing CFST members at a construction site environment.

Personality and Persuasive Technology: An Exploratory Study on Health-Promoting Mobile Applications

Science.gov (United States)

Halko, Sajanee; Kientz, Julie A.

Though a variety of persuasive health applications have been designed with a preventive standpoint toward diseases in mind, many have been designed largely for a general audience. Designers of these technologies may achieve more success if applications consider an individual's personality type. Our goal for this research was to explore the relationship between personality and persuasive technologies in the context of health-promoting mobile applications. We conducted an online survey with 240 participants using storyboards depicting eight different persuasive strategies, the Big Five Inventory for personality domains, and questions on perceptions of the persuasive technologies. Our results and analysis revealed a number of significant relationships between personality and the persuasive technologies we evaluated. The findings from this study can guide the development of persuasive technologies that can cater to individual personalities to improve the likelihood of their success.

Adopting new medical technologies in Russian hospitals: what causes inefficiency? (qualitative study).

Science.gov (United States)

Shishkin, Sergey; Zasimova, Liudmila

2018-01-01

The adoption of new medical technologies often generates losses in efficiency associated with the excess or insufficient acquisition of new equipment, an inappropriate choice (in terms of economic and clinical parameters) of medical equipment, and its poor use. Russia is a good example for exploring the problem of the ineffective adoption of new medical technologies due to the massive public investment in new equipment for medical institutions in 2006-2013. This study examines the procurement of new technologies in Russian hospitals to find the main causes of inefficiency. The research strategy was based on in-depth semistructured interviews with representatives of prominent actors (regional health care authorities, hospital executives, senior physicians). The main result is that inefficiencies arise from the contradiction between hospitals' and authorities' motivation for acquiring new technologies: hospitals tend to adopt technologies which bring benefits to their department heads and physicians and minimize maintenance and servicing costs, while the authorities' main concern is the initial cost of the technology.

Implementation of renewable energy technology - Opportunities and barriers. Summary of country studies

Energy Technology Data Exchange (ETDEWEB)

Painuly, J.P.; Fenhann, J.V.

2002-07-01

The project was launched to identify barriers to the implementation of renewable energy technologies (RETs) and explore measures to overcome the identified barriers. National institutions in Egypt, Ghana and Zimbabwe carried out the country studies based on the basic methodological framework provided by the UNEP Centre. The objectives of the project included strengthening institutional capacity for analysis and implementation of RET projects in the participating countries and bring out experiences on RETs barriers and removal measures for dissemination so that others can benefit from the knowledge so gained. An important highlight of the studies was involvement of stake holders in the process of identification of barriers and measures to remove them. A preliminary identification of relevant RETs for their countries was done by the country teams in the initial stage of the project. After that, national workshops involving various stake holders were held between July and September 1999 to discuss the RETs and barriers to their implementation. Based on the discussions, a few important RETs were identified for more detailed study. PV systems for rural electrification, solar water heating systems and large-scale biogas system were identified and analysed for barriers in the Egypt country study. Economic, information and policy barriers were identified as major barriers for these technologies. Solar water pumps, biogas and small hydro were the focus of study in Ghana. In this case also, economic, information and policy barriers were found to be the important barriers for the selected technologies. In the case of Zimbabwe, focus was on identification of primary and secondary barriers to RETs dissemination. The primary barriers included lack of capacity to develop proposals, lack of information for policy making and framework for information dissemination. The study concluded that the secondary barriers as seen and experienced by the stake holders are due to primary

Can a tablet device alter undergraduate science students' study behavior and use of technology?

Science.gov (United States)

Morris, Neil P; Ramsay, Luke; Chauhan, Vikesh

2012-06-01

This article reports findings from a study investigating undergraduate biological sciences students' use of technology and computer devices for learning and the effect of providing students with a tablet device. A controlled study was conducted to collect quantitative and qualitative data on the impact of a tablet device on students' use of devices and technology for learning. Overall, we found that students made extensive use of the tablet device for learning, using it in preference to laptop computers to retrieve information, record lectures, and access learning resources. In line with other studies, we found that undergraduate students only use familiar Web 2.0 technologies and that the tablet device did not alter this behavior for the majority of tools. We conclude that undergraduate science students can make extensive use of a tablet device to enhance their learning opportunities without institutions changing their teaching methods or computer systems, but that institutional intervention may be needed to drive changes in student behavior toward the use of novel Web 2.0 technologies.

Baseline Study Methodology for Future Phases of Research on Nuclear Power Plant Control Room Technologies

Energy Technology Data Exchange (ETDEWEB)

Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bower, Gordon Ross [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Rachael Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary Alexander [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-07-01

In order to provide a basis for industry adoption of advanced technologies, the Control Room Upgrades Benefits Research Project will investigate the benefits of including advanced technologies as part of control room modernization This report describes the background, methodology, and research plan for the first in a series of full-scale studies to test the effects of advanced technology in NPP control rooms. This study will test the effect of Advanced Overview Displays in the partner Utility’s control room simulator

An Exploratory Study of the Factors Associated with Literacy Teachers' Integration of Technology: A Study of Lebanese Schools

Science.gov (United States)

Chaaban, Youmen; Moloney, Robyn

2016-01-01

The purpose of this study is to explore Lebanese teachers' perceptions of the factors determining their integration of technology into literacy classrooms. A quantitative survey examining literacy teachers' individual characteristics and their perceptions of contextual factors was conducted at Lebanese schools. The survey collected data on the…

Managers and Information Technology: A Case Study of Organizational Change in County Government.

Science.gov (United States)

Rosenbaum, Howard

1992-01-01

Discussion of the interrelationship of information technology, managers, and users, and the structure of public sector organizations focuses on a case study that examined the organizational changes in the information services department of a large, urban county government as a result of the use of sophisticated information technologies. (11…

The Impact of Technological Change; The American Experience. Studies in Employment and Unemployment.

Science.gov (United States)

Haber, William; And Others

Technological change is a complex term involving many more factors than "changes in machinery or automation." Six changes which affect jobs and influence skills in our industrial systems that could logically be called technological change have been identified: (1) scientific management, or time and motion studies, (2) mergers and consolidations,…

Technological Health Intervention in Population Aging to Assist People to Work Smarter not Harder: Qualitative Study

Science.gov (United States)

2018-01-01

Background Technology-based health care has been promoted as an effective tool to enable clinicians to work smarter. However, some health stakeholders believe technology will compel users to work harder by creating extra work. Objective The objective of this study was to investigate how and why electronic health (eHealth) has been applied in Taiwan and to suggest implications that may inspire other countries facing similar challenges. Methods A qualitative methodology was adopted to obtain insightful inputs from deeper probing. Taiwan was selected as a typical case study, given its aging population, advanced technology, and comprehensive health care system. This study investigated 38 stakeholders in the health care ecosystem through in-depth interviews and focus groups, which provides an open, flexible, and enlightening way to study complex, dynamic, and interactive situations through informal conversation or a more structured, directed discussion. Results First, respondents indicated that the use of technology can enable seamless patient care and clinical benefits such as flexibility in time management. Second, the results suggested that a leader’s vision, authority, and management skills might influence success in health care innovation. Finally, the results implied that both internal and external organizational governance are highly relevant for implementing technology-based innovation in health care. Conclusions This study provided Taiwanese perspectives on how to intelligently use technology to benefit health care and debated the perception that technology prevents human interaction between clinicians and patients. PMID:29301736

Nuclear Criticality Technology and Safety Project parameter study database

International Nuclear Information System (INIS)

Toffer, H.; Erickson, D.G.; Samuel, T.J.; Pearson, J.S.

1993-03-01

A computerized, knowledge-screened, comprehensive database of the nuclear criticality safety documentation has been assembled as part of the Nuclear Criticality Technology and Safety (NCTS) Project. The database is focused on nuclear criticality parameter studies. The database has been computerized using dBASE III Plus and can be used on a personal computer or a workstation. More than 1300 documents have been reviewed by nuclear criticality specialists over the last 5 years to produce over 800 database entries. Nuclear criticality specialists will be able to access the database and retrieve information about topical parameter studies, authors, and chronology. The database places the accumulated knowledge in the nuclear criticality area over the last 50 years at the fingertips of a criticality analyst

A Case Study of Policies and Procedures to Address Cyberbullying at a Technology-Based Middle School

Science.gov (United States)

Tate, Bettina Polite

2017-01-01

This qualitative case study explored the policies and procedures used to effectively address cyberbullying at a technology-based middle school. The purpose of the study was to gain an in-depth understanding of policies and procedures used to address cyberbullying at a technology-based middle school in the southern United States. The study sought…

International survey on attitudes toward ethics in health technology assessment: An exploratory study

NARCIS (Netherlands)

Arellano, L.E.; Willett, J.M.; Borry, P.

2011-01-01

Objectives: The objective of this exploratory study was to survey international health technology assessment (HTA) professionals to determine attitudes toward ethics in HTA. Methods: An exploratory, quantitative, cross-sectional study design was developed. The sample population (n = 636) was

Barriers and benefits to using mobile health technology after operation: A qualitative study.

Science.gov (United States)

Abelson, Jonathan S; Kaufman, Elinore; Symer, Matthew; Peters, Alexander; Charlson, Mary; Yeo, Heather

2017-09-01

Recently, mobile health technology has emerged as a promising avenue for improving physician-patient communication and patient outcomes. The objective of our study was to determine the public's perception of barriers and benefits to using mobile health technology technologies to enhance recovery after operation. We used the Empire State Poll to ask 2 open-ended questions to 800 participants assessing their perceptions of benefits and barriers to use mobile health technology after operation. All responses were coded independently, and any discrepancies were resolved by consensus. We used grounded theory to allow themes to arise from the codes. Interrater reliability was calculated using Cohen's Kappa. Participants identified a range of possible barriers to using mobile health technology apps after operation including: protecting personal health information, technology effectiveness and failure, preference for face-to-face interaction with their surgeon, level of effort required, and ability of the older adults to navigate mobile health technology. Participants identified multiple possible benefits including: better monitoring, improved communication with their surgeon, minimizing follow-up visits, improved convenience, and increased patient knowledge. In the study, 15% of all respondents stated there were no barriers whereas 6% stated there were no benefits. Participants were receptive to the many potential benefits of this technology to enhance not only their relationships with providers and the convenience of access, but also their health outcomes. We must address participants concerns about data security and their fears of losing a personal relationship with their doctor. Copyright © 2017 Elsevier Inc. All rights reserved.

Teacher design of technology for emergent literacy: An explorative feasibility study

NARCIS (Netherlands)

McKenney, Susan; Voogt, Joke

2012-01-01

The active participation of teachers in designing classroom learning experiences contributes to teacher abilities to facilitate learning. This paper reports on a case study of one Dutch teacher designing a technology-rich learning environment for emergent literacy. Data was collected to explore the

Instructional Technologies in the Workforce: Case Studies from the Nuclear Industry.

Science.gov (United States)

Widen, William C.; Roth, Gene L.

1992-01-01

Describes six types of instructional technology used in the nuclear industry: Study Pacs, computerized test banks, computer-based training, interactive videodisc, artificial intelligence, and full-scope simulation. Each description presents the need, training device, outcomes, and limitations or constraints on use. (SK)

A Follow-up Study of a Successful Assistive Technology for Children with ADHD and Their Families

DEFF Research Database (Denmark)

Sonne, Tobias; Marshall, Paul; Müller, Jörg

2016-01-01

in the first phase of the study, continued even after the study period, when the technology was no longer available. We furthermore present insights into family practices in families of children with ADHD and how these could lead to unexpected challenges and implications related to the adoption, use......Little research on assistive technologies for families of children with attention deficit hyperactivity disorder (ADHD) has investigated the long-term impact, after the assistive technology is returned to the researchers. In this paper, we report the outcomes of a follow-up study, conducted four......-weeks after a field study of 13 children with ADHD and their families who used an assistive technology designed to help establish and change family practices. We show that some of the positive effects on parent frustration level and conflict level around morning and bedtime routines that we observed...

Evaluating Teleworkers' Acceptance of Mobile Technology: A Study Based on the Utaut Model

Science.gov (United States)

Mills, Jamia Sharie

2016-01-01

Mobile technology has provided flexible methods for employees to complete work-related tasks without being tied to an office. Research has predicted the level of training on mobile technology may impact a user's ability to complete work responsibilities accurately. This study intended to examine what behavior factors from the unified theory of…

Nuclear technology and chronic diseases: an exploratory study evolving the clinical physician perception

International Nuclear Information System (INIS)

Sato, Renato Cesar

2010-01-01

This research is an exploratory cross-sectional study about the relationship of chronic disease and the use of nuclear technology. There is a concern over the increase of the prevalence of chronic disease in developing countries and it should hence be carefully evaluated in the context of societies, organizations and individuals. The technological advances experienced in the last decades especially in the nuclear technology area have created expectations to deal more efficiently with the challenge of chronic diseases. However little has been explored in this area under the point-of-view of medical doctors as agents who make this system of relations between disease and technology. The necessity for public and private planning to deal with this set of problems can benefit through an initial evaluation about the forthcoming theme, but should incorporate the agenda of health and technology planning for the following years. Using mixed methodology, made up of qualitative and quantitative approach, this research sought to reveal and configure important dimensions around the theme of this study. The field research was made up of interviews analyzed using techniques of fundamental theory and also of questionnaires sent by web analyzed statistically using exploratory factor analysis. These ventures allowed dimensions to be revealed that make up the perception of chronic disease and the use of nuclear technology. These dimensions presented in a form of a theoretical construct that were then discussed under the point of view of social theory and technological innovation. (author)

The Modified Technology Acceptance Model for Private Clinical Physicians: A Case Study in Malaysia, Penang

OpenAIRE

Annie Ng Cheng San; Choy Johnn Yee

2013-01-01

Malaysia’s private clinic is wealth creator. To enhance its sustainable future, healthcare Information Technology (IT) change is inevitable. However, its’ IT acceptance is limited. The past literatures showed physicians have different technology acceptance decision as compare to common users. Hence, understanding the physicians’ technology acceptance is critical for technology management success. This study aims to gauge the factors influence technology acceptance decision among the physician...

An Exploratory Study on K-12 Teachers' Use of Technology and Multimedia in the Classroom

Science.gov (United States)

Martin, Florence; Carr, Marsha L.

2015-01-01

21st century has seen new technology and multimedia made available for integration in K-12 classrooms. This exploratory study examines K-12 teachers' use of technology and multimedia in the classroom in two southern counties in the Southeastern United States. The purpose of the study was to answer the following five research questions: 1) What…

Studying Innovation Technologies in Modern Education

Science.gov (United States)

Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

2016-01-01

In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

Big Data technology in traffic: A case study of automatic counters

Directory of Open Access Journals (Sweden)

Janković Slađana R.

2016-01-01

Full Text Available Modern information and communication technologies together with intelligent devices provide a continuous inflow of large amounts of data that are used by traffic and transport systems. Collecting traffic data does not represent a challenge nowadays, but the issues remains in relation to storing and processing increasing amounts of data. In this paper we have investigated the possibilities of using Big Data technology to store and process data in the transport domain. The term Big Data refers to a large volume of information resource, its velocity and variety, far beyond the capabilities of commonly used software for storing, processing and data management. In our case study, Apache™ Hadoop® Big Data was used for processing data collected from 10 automatic traffic counters set up in Novi Sad and its surroundings. Indicators of traffic load which were calculated using the Big Data platforms were presented using tables and graphs in Microsoft Office Excel tool. The visualization and geolocation of the obtained indicators were performed using the Microsoft Business Intelligence (BI tools such as: Excel Power View and Excel Power Map. This case study showed that Big Data technologies combined with the BI tools can be used as a reliable support in monitoring of the traffic management systems.

A Firm Level Study of Information Technology Productivity in Europe Using Financial and Market Based Measures

Directory of Open Access Journals (Sweden)

Alan Peslak

2004-05-01

Full Text Available For many years, business has invested significant resources in information technology, hardware, software, and manpower. The Productivity Paradox is the seeming lack of productivity gains despite the increased investment in IT. For many years the existence of a Productivity Paradox has been the subject of research interest. Conflicting results have been obtained from a variety of data sets. Until this time however there has been no study that has investigated European companies’ use of information technology and its impact on productivity. The objective of this study was to investigate information technology productivity with a new data set from a European published source, and measuring productivity using both market and financial based measures. Results of the study indicated that information technology did have a consistent positive impact on firm level productivity in Europe for the years 1996, 1997, and 1998. Both market and financial based productivity measures provided consistent positive significant returns with regard to IT productivity. The major contribution of the study is that it provides an analysis of the impact of European information technology on firm and economic productivity.

The use of QR Code as a learning technology: an exploratory study

Directory of Open Access Journals (Sweden)

Stefano Besana

2010-12-01

Full Text Available This paper discusses a pilot study on the potential benefits of QR (Quick Response Codes as a tool for facilitating and enhancing learning processes. An analysis is given of the strengths and added value of QR technologies applied to museum visits, with precautions regarding the design of learning environments like the one presented. Some possible future scenarios are identified for implementing these technologies in contexts more strictly related to teaching and education.

Study on the high-precision laser welding technology of nuclear fuel elements processing

Energy Technology Data Exchange (ETDEWEB)

Kim, Soo Sung; Yang, M. S.; Kim, W. K.; Lee, D. Y

2001-01-01

The proper welding method for appendage of bearing pads and spacers of PHWR nuclear fuel elements is considered important in respect to the soundness of weldments and the improvement of the performance of nuclear fuels during the operation in reactor. The probability of welding defects of the appendage parts is mostly apt to occur and it is connected directly with the safty and life prediction of the nuclear reactor in operation. Recently there has been studied all over the world to develope welding technology by laser in nuclear fuel processing, and the appendage of bearing pads and spacers of PHWR nuclear fuel elements. Therefore, the purpose of this study is to investigate the characteristics of the laser welded specimens and make some samples for the appendage of bearing pads of PHWR nuclear fuel elements. This study will be also provide the basic data for the fabrications of the appendage of bearing pads and spacers. Especially the laser welding is supposed to be used in the practical application such as precise materials manufacturing fields. In this respect this technology is not only a basic advanced technology with wide applications but also likely to be used for the development of directly applicable technologies for industries, with high potential benefits derived in the view point of economy and industry.

Study on the high-precision laser welding technology of nuclear fuel elements processing

International Nuclear Information System (INIS)

Kim, Soo Sung; Yang, M. S.; Kim, W. K.; Lee, D. Y.

2001-01-01

The proper welding method for appendage of bearing pads and spacers of PHWR nuclear fuel elements is considered important in respect to the soundness of weldments and the improvement of the performance of nuclear fuels during the operation in reactor. The probability of welding defects of the appendage parts is mostly apt to occur and it is connected directly with the safty and life prediction of the nuclear reactor in operation. Recently there has been studied all over the world to develope welding technology by laser in nuclear fuel processing, and the appendage of bearing pads and spacers of PHWR nuclear fuel elements. Therefore, the purpose of this study is to investigate the characteristics of the laser welded specimens and make some samples for the appendage of bearing pads of PHWR nuclear fuel elements. This study will be also provide the basic data for the fabrications of the appendage of bearing pads and spacers. Especially the laser welding is supposed to be used in the practical application such as precise materials manufacturing fields. In this respect this technology is not only a basic advanced technology with wide applications but also likely to be used for the development of directly applicable technologies for industries, with high potential benefits derived in the view point of economy and industry

Technological Health Intervention in Population Aging to Assist People to Work Smarter not Harder: Qualitative Study.

Science.gov (United States)

Chen, Sonia Chien-I

2018-01-04

Technology-based health care has been promoted as an effective tool to enable clinicians to work smarter. However, some health stakeholders believe technology will compel users to work harder by creating extra work. The objective of this study was to investigate how and why electronic health (eHealth) has been applied in Taiwan and to suggest implications that may inspire other countries facing similar challenges. A qualitative methodology was adopted to obtain insightful inputs from deeper probing. Taiwan was selected as a typical case study, given its aging population, advanced technology, and comprehensive health care system. This study investigated 38 stakeholders in the health care ecosystem through in-depth interviews and focus groups, which provides an open, flexible, and enlightening way to study complex, dynamic, and interactive situations through informal conversation or a more structured, directed discussion. First, respondents indicated that the use of technology can enable seamless patient care and clinical benefits such as flexibility in time management. Second, the results suggested that a leader's vision, authority, and management skills might influence success in health care innovation. Finally, the results implied that both internal and external organizational governance are highly relevant for implementing technology-based innovation in health care. This study provided Taiwanese perspectives on how to intelligently use technology to benefit health care and debated the perception that technology prevents human interaction between clinicians and patients. ©Sonia Chien-I Chen. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 04.01.2018.

Vacuum Technology in the study of Graphene

International Nuclear Information System (INIS)

Ghoshal, A K; Banerjee, S N; Chakraborty, D

2012-01-01

Graphene, an allotrope of carbon is a two-dimensional sheet of covalently bonded carbon atoms that has been attracting great attention in the field of electronics. In a recent review graphene is defined as a flat monolayer of carbon atoms tightly packed into a 2-D honeycomb lattice. A survey has been made of the production processes and instrumentation for characterization of graphene. In the production of graphene, the methods mainly used are Epitaxial growth, oxide reduction, growth from metal-carbon melts, growth from sugar. In the characterization of graphene, the instruments that are mainly used to study the atomic properties, electronic properties, optical properties, spin properties are Scanning Electron Microscopy, Transmission Electron Microscopy, Raman Spectroscopy. In all these instruments high or ultra-high vacuum is required. This paper attempts to correlate vacuum technology in the production and characterization of graphene.

Methodological principles outline discipline "Organization studies-tourism activity" using information technologies.

Directory of Open Access Journals (Sweden)

Kozina Zh.L.

2011-08-01

Full Text Available The basic methodological principles of the disciplines of tourism and local history with information technology. 15 analyzed the literature and experience of leading experts in the field of sports and health tourism, and orienteering. Identified principles of academic disciplines of tourism and local history: the shift in emphasis from sports tourism to the cognitive, health tourism, the development of spiritual qualities, acquisition of life skills in nature, discovery and development of pedagogical and psychological abilities, character traits through the study of native land, the development of cognitive-research abilities, physical abilities, motor skills, application of modern information technology.

Information technology companies with focus on sustainable economy: a case study

Directory of Open Access Journals (Sweden)

Robson da Silva Teixeira

2016-01-01

Full Text Available This article discusses how knowledge is used in sustainable economic development. The survey was drawn from the mapping of four companies that work with information technology, in order to qualitatively analyze the relevance of these enterprises in the economic scenario of the country and how they deal with the "product knowledge." The results showed the investment by all firms studied in the qualification of its workforce and managing the quality of their products and services. Finally, it is concluded that there is much room for information technology grow in Brazil, just invest in innovation.

The acceptance of green technology: A case study in Sabah Development Corridor

Science.gov (United States)

Jainudin, Noor Azland; Jugah, Ivy; Ali, Awang Nasrizal Awang; Tawie, Rudy

2017-08-01

Green technology is the development and application of products, equipment and systems used to conserve the environment which minimizes the negative impact from human activities. The technology can be in the form of green buildings or renewable energy such as hydro, solar and biogas. Development in SDC is still at the early stage, hence there is a prospect to plan for proper green concept implementation. With the increasing number of construction projects particularly in the rapid developing city of Kota Kinabalu, green technology as a whole is becoming more significant as it helps to develop effective solutions to encounter global environmental issues. Although there has been lengthy discussion on the green technology, the visibility of the implementation is still yet to be seen widely in Kota Kinabalu. The implementation of green technology in construction will support dynamic growth of economic development activities, while improving the environment. Hence, it is important to develop a strategic plan to promote the use of green technology while the areas are still developing. The focus of this correlative-based approach study is to investigate the perception and implementation of green technology in Kota Kinabalu from the industrial perspectives.

Assisted Reproductive Technology Has No Association with Autism Spectrum Disorders: The Taiwan Birth Cohort Study

Science.gov (United States)

Lung, For-Wey; Chiang, Tung-Liang; Lin, Shio-Jean; Lee, Meng-Chih; Shu, Bih-Ching

2018-01-01

The use of assisted reproduction technology has increased over the last two decades. Autism spectrum disorders and assisted reproduction technology share many risk factors. However, previous studies on the association between autism spectrum disorders and assisted reproduction technology have shown inconsistent results. The purpose of this study…

Characterizing the technology firm : An exploratory study

NARCIS (Netherlands)

Grinstein, A.; Goldman, Arieh

Technology firms occupy a central position in modern economies. They drive economic growth, productivity gains and have created new industries and innovative products. Many will agree that technology firms are distinguished from others in their emphasis on technological activities. Since this

Study on the knowledge management of strategic alliances in high technology enterprises

Institute of Scientific and Technical Information of China (English)

TANG Yu; WANG Hong-qi; WANG Shan-shan

2005-01-01

With the development of knowledge economy, the competition between high technology enterprises has gradually evolved into the competition of core competence based on knowledge, because high technology enterprises are typical knowledge-based enterprises. Few enterprises, especially for high technology firms, have all of the knowledge they need to compete effectively in the marketplace both at home and abroad, so more and more high technology companies are taking the advantage of strategic alliances to get their complementary knowledge. Since knowledge is the source of an enterprise' s competitiveness, knowledge management has become the most important means for enterprises to gain competitive advantage. There has been an increased growth in the literature on strategic alliances in recent decades. But what is less discussed in the existing literature on strategic alliances is the issue of knowledge management of strategic alliances in high technology enterprises. Based on the characteristics of strategic alliances in high technology enterprises, and in line with the implication and the goal of knowledge management, this study tries to delve into this issue. The paper analyzes the key factors relevant to the knowledge management of strategic alliances in high technology enterprises and proposes guide lines on the process and measures that should be taken in the knowledge management of strategic alliances in high technology enterprises.

Instructors' use of technology in post-secondary undergraduate mathematics teaching: a local study

Science.gov (United States)

Jesso, A. T.; Kondratieva, M. F.

2016-02-01

In this study, instructors of undergraduate mathematics from post-secondary institutions in Newfoundland were surveyed (N = 13) and interviewed (N = 8) about their use of, experiences with, and views on, technologically assisted teaching. It was found that the majority of them regularly use technologies for organizational and communication purposes. However, the use of math-specific technology such as computer algebra systems, or dynamic geometry software for instructional, exploratory, and creative activities with students takes place mostly on an individual basis, only occasionally, and is very much topic specific. This was even the case for those instructors who use technology proficiently in their research. The data also suggested that familiarity with and discussions of examples of technology implementation in teaching at regular and field-oriented professional development seminars within mathematics departments could potentially increase the use of math-specific technology by instructors.

Examining Social Studies and Science and Technology Preservice Teachers' Epistemological Beliefs Regarding Different Variables

Science.gov (United States)

Topkaya, Yavuz

2015-01-01

The purpose of this study is to determine epistemological beliefs of pre-service teachers who attend social studies and science and technology teaching programs; and to investigate how these beliefs varies regarding grade level, gender and departments. The sample of the study is composed of 300 social studies, 260 science and technology…

A study on affective work skills needs of engineering and technology ...

African Journals Online (AJOL)

The study is designed to investigate the affective work skills needs of Engineering and Technology Education students of universities in North Central States of Nigeria. A 18 items questionnaire was developed and used to collect data from 60 Engineers, 100 technicians and 150 lecturers. Purposive sampling techniques ...

Why Integrating Technology Has Been Unsuccessful in Kuwait? An Exploratory Study

Science.gov (United States)

Alfelaij, Bader

2016-01-01

In Kuwait, unsuccessful attempts to use and integrate technology into classrooms and lecture halls are currently being witnessed in schools and higher education institutions. Such failure is believed to be the consequence of various challenges, such as cultural, technical and contextual challenges. In this exploratory study, the researcher has…

Promoting community socio-ecological sustainability through technology: A case study from Chile

Science.gov (United States)

Aguayo, Claudio; Eames, Chris

2017-12-01

The importance of community learning in effecting social change towards ecological sustainability has been recognised for some time. More recently, the use of Information and Communication Technology (ICT) tools to promote socio-ecological sustainability has been shown to have potential in community education for sustainable development (ESD). The effective design and use of technology for community learning implies an understanding of a range of cross-dimensional factors including: socio-cultural characteristics and needs of the target audience; considerations of available and culturally responsive types of technology; and non-formal pedagogical ESD strategies for community empowerment. In addition, both technology itself and social communities are dynamically evolving and complex entities. This article presents a case study which evaluated the potential of ICT for promoting ecological literacy and action competence amongst community members in southern Chile. The case study addressed the ecological deterioration of a lake, which is having deep social, economic, recreational and cultural implications locally. The authors' research involved developing a theoretical framework for the design, implementation and use of ICT for community learning for sustainability. The framework was based on key ideas from ESD, ICT and community education, and was underpinned by a systems thinking approach to account for the dynamism and complexity of such settings. Activity theory provided a frame to address overarching socio-cultural elements when using technology as a mediating tool for community learning. The authors' findings suggest that the use of an ICT tool, such as a website, can enhance ecological literacy in relation to a local socio-ecological issue.

STUDYING TECHNOLOGIES FOR CREATING ELECTRONIC TERMINOLOGICAL BASES IN THE PROCESS OF PROFESSIONAL TRAINING OF TRANSLATORS

Directory of Open Access Journals (Sweden)

Svitlana M. Amelina

2017-09-01

Full Text Available The article deals with the peculiarities of studying the technologies of creating electronic terminology databases at different stages of professional training of future translators in accordance with the level of their information competence. The issues of studying terminology management in foreign universities are considered. It is clarified that the ability to create and to use terminology databases is included in the curricula of disciplines on translation practice and translation technologies. There are various ways of creating terminological databases depending on their structure and technology. It is accentuated on mastering the technology of forming terminology databases by extracting terms from specialized texts. It is noted that the accumulation of own terminological resources makes it possible to use them in high-tech translation systems.

Small Engine Technology (SET) Task 24 Business and Regional Aircraft System Studies

Science.gov (United States)

Lieber, Lysbeth

2003-01-01

This final report has been prepared by Honeywell Engines & Systems, Phoenix, Arizona, a unit of Honeywell International Inc., documenting work performed during the period June 1999 through December 1999 for the National Aeronautics and Space Administration (NASA) Glenn Research Center, Cleveland, Ohio, under the Small Engine Technology (SET) Program, Contract No. NAS3-27483, Task Order 24, Business and Regional Aircraft System Studies. The work performed under SET Task 24 consisted of evaluating the noise reduction benefits compared to the baseline noise levels of representative 1992 technology aircraft, obtained by applying different combinations of noise reduction technologies to five business and regional aircraft configurations. This report focuses on the selection of the aircraft configurations and noise reduction technologies, the prediction of noise levels for those aircraft, and the comparison of the noise levels with those of the baseline aircraft.

A Qualitative Study of Technology-Based Training in Organizations that Hire Agriculture and Life Sciences Students

Science.gov (United States)

Bedgood, Leslie; Murphrey, Theresa Pesl; Dooley, Kim E.

2008-01-01

Technological advances have created unlimited opportunities in education. Training and technology have merged to create new methods referred to as technology-based training. The purpose of this study was to identify organizations that hire agriculture and life sciences students for positions involving technology-based training and identify…

Factors related to the implementation and diffusion of new technologies: a pilot study

Energy Technology Data Exchange (ETDEWEB)

1979-06-01

In order to develop an understanding of how government intervention affects the processes of implementation and diffusion of new technologies, case studies of 14 technologies were carried out: automobiles; broadcast radio; frozen foods; black and white TV; color TV; polio vaccine; supersonic transport; fluoridation of water supplies; computer-aided instruction; basic oxygen process for steel; numerical control in manufacturing; digital computers; lasers; and integrated circuit. The key factors, their motivations for implementing/adopting the technology (or not doing so), the interactions among the key factors, and how these affected implementation/adoption are examined.

Integrating technology readiness into the expectation-confirmation model: an empirical study of mobile services.

Science.gov (United States)

Chen, Shih-Chih; Liu, Ming-Ling; Lin, Chieh-Peng

2013-08-01

The aim of this study was to integrate technology readiness into the expectation-confirmation model (ECM) for explaining individuals' continuance of mobile data service usage. After reviewing the ECM and technology readiness, an integrated model was demonstrated via empirical data. Compared with the original ECM, the findings of this study show that the integrated model may offer an ameliorated way to clarify what factors and how they influence the continuous intention toward mobile services. Finally, the major findings are summarized, and future research directions are suggested.

Tablet Technology in Teacher Preparation: A Case Study--The Nook Initiative

Science.gov (United States)

Jordan, Hope; Hunter, Elizabeth; Douglas, Maegan; Wighting, Mervyn

2015-01-01

Regent University's Special Education and Reading Specialist Programs introduced the Nook Initiative fall 2013. This paper discusses the implementation, the need for integrated tablet technology in teacher preparation, initial outcomes of the study, and offers suggestions for practice. A second tablet pilot program introducing the iPad mini in the…

Fit by Bits: An Explorative Study of Sports Physiotherapists' Perception of Quantified Self Technologies.

Science.gov (United States)

Allouch, Somaya Ben; van Velsen, Lex

2018-01-01

Our aim was to determine sport physiotherapists' attitudes towards Quantified Self technology usage and adoption and to analyze factors that may influence this attitude. A survey was used to study a sample in the Netherlands. Assessment was made of attitudes of towards Quantified Self technology usage by clients of therapists, by therapists themselves and intention to adopt Quantified Self technology. Results show that the uptake of Quantified Self technology by sports physiotherapists is rather low but that the intention to adopt Quantified Self technology by sports physiotherapists is quite high. These results can provide a foundation to provide an infrastructure for sports physiotherapists to fulfill their wishes with regard to Quantified Self technology.

Study on the Contribution of Nuclear and RI Technology to the National Economy

International Nuclear Information System (INIS)

Lee, Man Ki; Moon, K. H.; Kim, S. S.

2004-12-01

This study evaluated the economic value addition of nuclear power generation technology and radio-isotope(RI) technology quantitatively by using modified Input-Output table. For the nuclear power generation technology, the economic effect of both power plant construction and operation was evaluated. On the other hand, the economic effect of the RI utilization on the national economy was evaluated for RI technology. Firstly, the total economic value addition from nuclear power generation(both construction and operation) was estimated as 1.4% of Gross Domestic Product(GDP) in 2000. Among them, 1.2% was from nuclear power plant operation and the rest was from construction. On the other hand, the economic value addition from RI technology has continuously increased. Its share of GDP increased from 0.30% in 1980 to 0.58 in 2000

A Qualitative Study of African American Women in Engineering Technology Programs in Community Colleges

Science.gov (United States)

Blakley, Jacquelyn

2016-01-01

This study examined the experiences of African American women in engineering technology programs in community colleges. There is a lack of representation of African American women in engineering technology programs throughout higher education, especially in community/technical colleges. There is also lack of representation of African American…

Advanced supersonic propulsion study, phase 2. [propulsion system performance, design analysis and technology assessment

Science.gov (United States)

Howlett, R. A.

1975-01-01

A continuation of the NASA/P and WA study to evaluate various types of propulsion systems for advanced commercial supersonic transports has resulted in the identification of two very promising engine concepts. They are the Variable Stream Control Engine which provides independent temperature and velocity control for two coannular exhaust streams, and a derivative of this engine, a Variable Cycle Engine that employs a rear flow-inverter valve to vary the bypass ratio of the cycle. Both concepts are based on advanced engine technology and have the potential for significant improvements in jet noise, exhaust emissions and economic characteristics relative to current technology supersonic engines. Extensive research and technology programs are required in several critical areas that are unique to these supersonic Variable Cycle Engines to realize these potential improvements. Parametric cycle and integration studies of conventional and Variable Cycle Engines are reviewed, features of the two most promising engine concepts are described, and critical technology requirements and required programs are summarized.

Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

Science.gov (United States)

Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

2018-01-05

Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

Soft Skills for Information Technology Professionals in Recruitment Advertisements: A Follow-up Study

Science.gov (United States)

McMahon, Cynthia J. Moore

2013-01-01

The purpose of this research is to determine if the use of soft skills requirements in job posting advertisements for information technology professional positions has increased since the dissertation study by G. K. Tannnahill in 2007, titled "Study of Soft Skills for IT Workers in Recruitment Advertising," to support prior research…

Virtual Teaming and Collaboration Technology: A Study of Influences on Virtual Project Outcomes

Science.gov (United States)

Broils, Gary C.

2014-01-01

The purpose of this quantitative correlational study was to explore the relationships between the independent variables, contextual factors for virtual teams and collaboration technology, and the dependent variable, virtual project outcomes. The problem leading to the need for the study is a lower success rate for virtual projects compared to…

Introduction to the study of solar technology

Energy Technology Data Exchange (ETDEWEB)

Touchais, M

1979-01-01

The conversion of solar energy to meet the world's energy requirements by means of solar technology is discussed as preface to an introductory course in solar technology. The significance of the energy crisis of 1973 to the development of alternative sources of energy, primarily solar, is considered, and the amount of recoverable solar energy incident on the earth is estimated to be able to supply the world's energy demand. The various means of solar energy conversion, including thermal, chemical in the form of hydrogen or methane, and direct or thermal electrical, are examined, and areas of these technologies requiring further experimental investigation are indicated. Solar technology is presented as the science of the artificial applications of solar energy, with mention of its associated disciplines, and the deficiencies of the solar technology developed prior to the energy crisis are exposed. Goals for contemporary instruction in solar technology are then derived, the introductory course is outlined, and bibliographic references are presented. Differences between the sources of solar and traditional energies are also discussed.

Using Technologies in Nursing Research Education: A Mixed Methods Case Study.

Science.gov (United States)

Luo, Shuhong; Yang, Harrison Hao

2018-02-28

To better prepare nurses for the new and expanding roles required in healthcare, faculty are expected to integrate emerging technology into educational processes. Using a mixed methods research design, this study aimed to examine nursing student reactions and learning based on their participation in an online research course through two technology-enhanced assignments: (1) annotation of the structure of a research article and (2) reflection on the content of a research article. Quantitative analysis examined students' questionnaire responses, and qualitative analysis explored students' reflective learning journals and the instructor's notes. These two separate strands of data were then integrated using a joint display. The discussion was guided by two components of the New World Kirkpatrick model, reaction and learning. Our findings suggest that the use of technology in the design of assignments is a way to engage students in learning and can be used to enhance nursing students' research learning online.

Technology Integration in EFL Classrooms: A Study of Qatari Independent Schools

Science.gov (United States)

Chaaban, Youmen; Ellili-Cherif, Maha

2017-01-01

The purpose of this study was to examine the impact of teachers' individual characteristics and perceptions of environmental factors on the extent of technology integration into EFL (English as a Foreign Language) classrooms. To this end, a national survey examining EFL teachers' perceptions was conducted at Qatari Independent Schools. A total of…

Theoretical-Experimental study on the electroslag remelting technology of high quality steels

International Nuclear Information System (INIS)

Robles P, E.F.

1993-01-01

This is a theoretical-experimental laboratory study on the Electroslag Remelting Technology (ESRT) of high quality steels. The objective of this study was to analyze the problems that this technology entails and thus facilitate its industrial application in Mexico. The study was carried out using a 1 Kg. capacity furnace, the behavior of different fluxes on the remelting of 1018 AISI carbon steel was established and a slag 70F/15/15 was selected for the remelting of H-13 AISI hot work tool steel. From the experimental results it was possible to establish a flux manufacture route, the electrode conditioning necessary for the experiments, and the critical points of the process. It was demonstrated that the crucible and electrode advance system are the more critical points in the furnace manufacture, that the start up is fundamental for the remelting continuity and that the CaF 2 base slags are more recommendable for special steels refining. It has been proven that it is possible to experiment with little laboratory electroslag furnaces. (Author)

A selective study of Information technologies to improve operations efficiency in construction

Directory of Open Access Journals (Sweden)

Konikov Alexandr

2018-01-01

Full Text Available Today, information technologies (IT are used in almost every production industry. While the aspects of IT are well studied and discussed in relevant monographs, articles, web sources, etc., this paper reviews the performance improvement options in the construction industry by leveraging IT. From a wide range of information technologies the author has picked the most relevant solutions, from his point of view, based on several considerations, the most important one being the lack of adequate attention to these technologies specifically in the construction industry. The paper covers the following technologies: Big Data (a smart technology for high-speed processing of huge and diverse data arrays; situation centers (SC for construction and operations projects (SCs are successfully used in other industries for operating control of sophisticated facilities; data warehouses (DW for the construction industry (DWs are viewed as a standalone project rather than a supplement to Data Mining or Big Data; operational and dispatch radio communication service (radio communication can ensure instant connectivity between several subscribers; VSAT (a satellite technology for prompt connection of a distant construction site with the 'outer world' when no alternatives are available. The paper briefly presents the essence of each technology, describes the pre-requisites for its use in construction, outlines the key advantages, limits and shortcomings, and lists construction projects where it shall be worthwhile to use a specific technology projects.

A Study on Teaching Quality of Taiwan Government Training Civil Servants with Educational Technology

Science.gov (United States)

Hsiao, Luke H. C.

2012-01-01

When economic globalization, informatization, and marketization are rapidly developing, the world is reaching the globally industrial society based on information technology. In such a fierce competition, human resource is gradually placed on the critical role. This study aims to: (1) understand the present situation of Educational Technology and…

Transfer of technology in the French-Iranian study for a nuclear research center in Iran

International Nuclear Information System (INIS)

Teillac, J.

1977-01-01

Economic wealth is the result of the three factors: natural resources, human work and technological know-how; the last being essential to make full use of the first two. The transfer of technology is not only a matter of training engineers or technicians but of creating a real network of knowledge and abilities so that the technologies can be fully assimilated and used according to the specific goals of the country, so a basic nuclear education is absolutely necessary, so the operation of a raining and research centre is essential. For this reason the CEA and its subsidary Technicatome have undertaken the study and construction of the Esfahan Nuclear Technology Centre (ENTEC). The main objectives of this centre are: the nuclear reactors, the study of nuclear fuels and industrial applications

Holding a candle to innovation in concentrating solar power technologies: A study drawing on patent data

International Nuclear Information System (INIS)

Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

2011-01-01

Improved understanding of the innovative pathways of renewable energy technologies is vital if we are to make the transition to a low carbon economy. This study presents new evidence on innovation and industry dynamics in concentrating solar power (CSP) technologies. Though CSP is undergoing a renaissance, existing innovation studies have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and CSP technologies. This study, based on patent data, examines the level and dynamics of innovative activity in CSP between 1978 and 2004. Our unique contribution, based on engineering expertise and detailed datawork, is a classification system mapping CSP technologies to the International Patent Classification (IPC) system. The innovation performance of CSP is found to be surprisingly weak compared to the patent boom in other green technologies. Performance was strong around 1980 before falling dramatically, and has only recently begun to show signs of recovery. Innovation and R and D are concentrated in high-tech countries; the US, Germany and Japan, which do not necessarily have high domestic CSP potential. Large CSP potential is, therefore, not a sufficient condition for innovation. Innovators must possess economic and scientific capabilities. - Research highlights: → We develop a new classification system which allows us to map innovation in CSP technologies to the International Patent Classification System. → Evidence of innovation patterns in concentrating solar power technologies is presented. → Innovation performance in CSP is surprisingly weak compared to patenting in other green technologies, despite its strong potential as a low carbon power generation technology.

New tools and technology for the study of human performance in simulator experiments

International Nuclear Information System (INIS)

Droeivoldsmo, Asgeir

2004-04-01

The Halden Virtual Reality Centre has for the last four years reported a number of experiments in the area of real world application of virtual and augmented reality technology. The insights from these studies have been reviewed and reported as part of a PhD-thesis submitted at the Norwegian University of Science and Technology. This report is based on the thesis and contains a theoretical discussion of how the virtual and augmented reality technology could be used to extend human operator performance in control rooms to include co-operation with plant floor personnel and interaction with not already built equipment. This thesis suggests that new tools and technology can be used for production of relevant data and insights from the study of human performance in simulator and field experiments. It examines some of the theoretical perspectives behind data collection and human performance assessment, and argues for a high resemblance of the real world and use of subject matter expertise in simulator studies. A model is proposed, suggesting that human performance measurement should be tightly coupled to the topic of study and have a close connection to the time line. This coupling requires new techniques for continuous data collection, and eye movement tracking has been identified as a promising basis for this type of measures. One way of improving realism is to create virtual environments allowing for controlling more of the environment surrounding the test subjects. New application areas for virtual environments are discussed for use in control room and field studies. The combination of wearable computing, virtual and augmented (the use of computers to overlay virtual information onto the real world) reality provides many new possibilities to present information to operators. In two experiments, virtual and augmented reality techniques were used to visualise radiation fields for operators in a contaminated nuclear environment. This way the operators could train for

Can CDM bring technology transfer to China?-An empirical study of technology transfer in China's CDM projects

International Nuclear Information System (INIS)

Wang Bo

2010-01-01

China has undertaken the greatest number of projects and reported the largest emission reductions on the global clean development mechanism (CDM) market. As technology transfer (TT) was designed to play a key role for Annex II countries in achieving greenhouse gas emission reductions, this study examines various factors that have affected CDM and TT in China. The proportion of total income derived from the certified emissions reductions (CER) plays a key role in the project owners' decision to adopt foreign technology. Incompatibility of CDM procedures with Chinese domestic procedures, technology diffusion (TD) effects, Chinese government policy and the role of carbon traders and CDM project consultants all contribute to the different degrees and forms of TT. International carbon traders and CDM consultants could play a larger role in TT in China's CDM projects as investors and brokers in the future.

Perceptions of Teachers about Information and Communication Technologies (ICT): A Study of Metaphor Analysis

Science.gov (United States)

Bas, Gokhan

2017-01-01

This study aimed to examine metaphorical conceptions of high school teachers (n = 224) in Turkey about information and communication technologies (ICT). Phenomenological research design was adopted to examine teachers' perceptions about ICT in the current study. The results of the study showed that teachers produced a total of 46 valid metaphors…

Learning and Teaching Technology in English Teacher Education: Findings from a National Study

Science.gov (United States)

Pasternak, Donna L.; Hallman, Heidi L.; Caughlan, Samantha; Renzi, Laura; Rush, Leslie S.; Meineke, Hannah

2016-01-01

This paper reports on one aspect of a large-scale nationwide study that surveyed English teacher educators about English teacher preparation programs throughout the United States. One aspect of the study focused on how technology is integrated within the context of English teacher education programs, asking the question, "As an area of…

Technology-based functional assessment in early childhood intervention: a pilot study.

Science.gov (United States)

Khetani, Mary A; McManus, Beth M; Arestad, Kristen; Richardson, Zachary; Charlifue-Smith, Renee; Rosenberg, Cordelia; Rigau, Briana

2018-01-01

Electronic patient-reported outcomes (e-PROs) may provide valid and feasible options for obtaining family input on their child's functioning for care planning and outcome monitoring, but they have not been adopted into early intervention (EI). The purpose of this pilot study was to evaluate the feasibility of implementing technology-based functional assessment into EI practice and to examine child, family, service, and environmental correlates of caregiver-reported child functioning in the home. In a cross-sectional design, eight individual EI providers participated in a 90-min technology-based functional assessment training to recruit participants and a 60-min semi-structured focus group post data collection. Participants completed the Young Children's Participation and Environment Measure (YC-PEM) home section online and Pediatric Evaluation of Disability Inventory Computer Adaptive Test (PEDI-CAT) via iPad. Participants' EI service use data were obtained from administrative records. A total of 37 caregivers of children between 6 and 35 months old (mean age = 19.4, SD = 7.7) enrolled, a rate of 44% (37/84) in 2.5 months. Providers suggested expanding staff training, gathering data during scheduled evaluations, and providing caregivers and providers with access to assessment summaries. Caregivers wanted their child's participation to change in 56% of home activities. Lower caregiver education and higher EI intensity were related to less child involvement in home activities. Implementing technology-based functional assessment is feasible with modifications, and these data can be useful for highlighting child, family, and EI service correlates of caregiver-reported child functioning that merit further study. Feasibility results informed protocol modifications related to EI provider training, timing of data collection, and management of EI service use data extraction, as preparation for a subsequent scale-up study that is underway.

Modern Wildlife Monitoring Technologies: Conservationists versus Communities? A Case Study: The Terai-Arc Landscape, Nepal

Directory of Open Access Journals (Sweden)

Yashaswi Shrestha

2018-01-01

Full Text Available The use of new and advanced wildlife monitoring technologies is shifting the paradigm of wildlife conservation and management. These digital technologies are helping wildlife conservationists and researchers around the world to monitor and manage wildlife with more precision and efficiency. However, this research study highlights some of the key drawbacks of using such modern technologies for wildlife conservation and management especially in developing countries, where the digital divide often clearly separates well-endowed conservation organisations and rural communities. It provides an insight into how the extensive use of such digital wildlife monitoring technologies can often marginalise the role of local and indigenous communities in wildlife management. Our case study, which was conducted in the Terai Arc Landscape (TAL in southern Nepal, includes interviews with several wildlife experts, biologists, and members of local and indigenous communities. Findings indicate that the increasing militarisation and centralisation of protected area management, and the lack of universal access to the information gathered using modern monitoring technologies, have notably led to the marginalisation of local and indigenous communities in the region. These developments not only undermine the benefits of using such technologies but have also caused a rift between conservation organisations and local communities. As a result, this research study recommends that conservation organisations who advocate for the use of such technologies need to hold consultations and dialogues between conservationists and local and indigenous community members in order to be more inclusive and allow for a cross cultural and an interdisciplinary understanding of the best practices for the conservation and management of wildlife.

Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents

OpenAIRE

Misje, René

2013-01-01

Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents. This qualitative study explores the usefulness of music technology in music therapeutic practice with youth and adolescents. Four music therapist`s reflections on their use of music technologies and on the possibilities, potential and problems of this use are explored through semi-structured intervi...

Study on the Evolvement of Technology Development and Energy Efficiency—A Case Study of the Past 30 Years of Development in Shanghai

Directory of Open Access Journals (Sweden)

William X. Wei

2016-05-01

Full Text Available Previous research in regional energy efficiency by using macro statistical data has demonstrated that technology development could improve regional energy efficiency. Since the start of reform and opening up in 1978, China has mainly adopted energy import and foreign direct investment to promote economic growth. At the same time, the country has also increased the input of technology and R&D to prompt technological reformation and imported technology absorption. However, there is limited research on the relationship between technology development and energy efficiency. Using the grounded theory method, the authors of this paper study the relationship between technology input-output and energy utilization efficiency in Shanghai over the past 30 years. They conclude that although the tactics of technology import and foreign direct investment can improve energy efficiency in the initial stages of modern industrialization, they cannot improve it continuously. In the more advanced stages of modern industrialization, the improvement of energy efficiency relies not only on increased R&D investment but also on R&D investment structure optimization and independent technological innovation.

STUDY OF HORIZONTAL SCREEN STRENGTH CREATED BY INJECTION TECHNOLOGY CEMENT BINDER BASED

Directory of Open Access Journals (Sweden)

BORISOV A. A.

2016-09-01

Full Text Available Annotation. Formulation of the problem. An important indicator in the planning of injection works is a particle size distribution of the soil and the very composition of injection. The ideal case is to comply with the injection optimum ratio between the size of particles in solution and injectable medium. This ratio corresponds to complete impregnation of the environment. Today in the field of building technologies known classical methods of grouting with the injection process [9]. This may be a cementation or silicification with different chemical compositions. Due to the fact that we have proposed an innovative technology of impervious curtain device, special attention should be paid to the performance and physical and mechanical properties of the resulting soil-injection. This is due to the fact that the proposed technology provides for lesser known technical solutions, the use of which should ultimately result in impervious screens with desired properties. Goal. The aim of this study is to investigate the properties of the resulting soil-concrete impervious screen. Such structures should have defined a number of physical and mechanical properties. In this paper, it was of interest to study the compressive strength of the resulting soil-concrete structure. Conclusion. As a result of experimentation and implementation of complex obtained experimentally-statistical models that describe the main soil-quality indicators. Based on these data is possible optimal selection of formulation and technological structure for sandy soils with different modules size of its particles.

Hired Hands: Casualised Technology and Labour in the Teaching of Cultural Studies

Directory of Open Access Journals (Sweden)

Kieryn McKay

2011-09-01

Full Text Available This article examines the uptake and application of podcasting in a particular higher education context, drawing on the the authors' experience in late 2008 when both were employed as casual tutors on large-scale first-year communications and cultural studies courses at the University of Western Sydney. The article maps out the limits of technological innovation within the teaching of cultural studies, as well as its limits in promoting the radical potential of a cultural studies approach. It also charts some of the effects and affects of an over-reliance on casualised labour, which we argue can have a profoundly destabilising and atomising impact on academic practice and student engagement. We argue there is a parallel between the appropriation of popular media technologies into the university and the current system of casual academic employment in Australia, in that both the podcast and the casual academic represent ‘new’ interfaces of outsourced academic labour. Stipulated from our positions as casual teachers in cultural studies, this article is written from an embedded perspective which conceptualises both the podcast and the casual academic in line with the most prevalent mode of their employment in the academy: as ‘hired hands’, appendages to traditional models of pedagogy.

Teaching science to 8th graders by engaging them in a design and technology activity: A case study

Science.gov (United States)

Sidawi, Mai M.

This study described how students can apply science concepts to a Design and Technology task. It also examined whether the students could transfer their scientific knowledge to their design of technology. The study was conducted at an urban school in Philadelphia where a sample of 36 eighth grade students were taught a science unit, Energy, Machines, and Motion, and engaged in a technology design task that was chosen based on the scientific content of the unit. Two approaches of relating teaching science to technological design were observed and described. Through the first approach, the students were given technology lessons in addition to their science lessons. This was to provide them with the technological knowledge that they needed in designing technology such as learning about the design process, selection of appropriate materials, and selection of appropriate tools and how to use them. Also, the students were taught the social skills that will enable them to develop an effective collaborative relationship with their peers such as conflict-management and brainstorming. Through the second approach, the students were taught the science unit and then at the end of the unit the students were given the design task as an assessment of their scientific knowledge. The students' experience of designing technology for each approach was described. The study was conducted using multiple tools and instruments such as observation, videotaping, interviews, and testing. The students were also given the survey PATT-USA to measure their attitude toward technology. The study showed that the students' learning of science was impacted by their weak prerequisite knowledge in science, their poor verbal and written communication skills and their style as dependent learners. Also, the study showed the great impact of the school and classroom cultures on the participation of the students in a Design and Technology activity. The students in this study showed great resistant to

Technological Diversity: A Case Study into Language Learners' Mobile Technology Use Inside and Outside the Classroom

Science.gov (United States)

Brick, Billy; Cervi-Wilson, Tiziana

2015-01-01

The speed of technological advance in the mobile phone, netbook and tablet markets has meant that learners increasingly have access to digital devices capable of enhancing their learning experience. This case study reports on how language learners, taking Italian as an option on the Institution Wide Languages Programme (IWLP) at Coventry…

A Study of Trial and Error Learning in Technology, Engineering, and Design Education

Science.gov (United States)

Franzen, Marissa Marie Sloan

2016-01-01

The purpose of this research study was to determine if trial and error learning was an effective, practical, and efficient learning method for Technology, Engineering, and Design Education students at the post-secondary level. A mixed methods explanatory research design was used to measure the viability of the learning source. The study sample was…

Study on Dynamic Alignment Technology of COIL Resonator

International Nuclear Information System (INIS)

Xiong, M D; Zou, X J; Guo, J H; Jia, S N; Zhang, Z B

2006-01-01

The performance of great power chemical oxygen-iodine laser (COIL) beam is decided mostly by resonator mirror maladjustment and environment vibration. To improve the performance of light beam, an auto-alignment device is used in COIL resonator, the device can keep COIL resonator collimating by adjusting the optical components of resonator. So the coupling model of COIL resonator is present. The multivariable self study fuzzy uncoupling arithmetic and six-dimensional micro drive technology are used to design a six-input-three-output uncoupling controller, resulting in the realization of the high precision dynamic alignment. The experiments indicate that the collimating range of this system is 8 mrad, precision is 5 urad and frequency response is 20Hz, which meet the demand of resonator alignment system

A Study of Future Communications Concepts and Technologies for the National Airspace System - Part II

Science.gov (United States)

Ponchak, Denise S.; Apaza, Rafael D.; Haynes, Brian; Wichgers, Joel M.; Roy, Aloke

2014-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is investigating current and anticipated wireless communications concepts and technologies that the National Airspace System (NAS) may need in the next 50 years. NASA has awarded three NASA Research Announcements (NAR) studies with the objective to determine the most promising candidate technologies for air-to-air and air-to-ground data exchange and analyze their suitability in a post-NextGen NAS environment. This paper will present progress made in the studies and describe the communications challenges and opportunities that have been identified during the studies' first year.

A strategy study on the technology development for key nuclear structural materials

International Nuclear Information System (INIS)

Hong, Jun Hwa; Jeong, Youg Hwan; Kim, Tae Kyu

2012-01-01

In order to realize the advanced long-life PWRs and new Generation-IV nuclear systems, it is pre-requisite to establish or ensure the several key materials technology. In this study, we proposed the several key needs and directions for the key materials issues. Each issue is envisioned and described below. 1) Development of innovative nuclear structural materials with extreme environment-resistance for advanced G-IV systems 2) Improvement/development of key reactor materials for advanced and long -life PWRs. 3) Development of technologies against nuclear materials aging degradation

The Combination Design of Enabling Technologies in Group Learning: New Study Support Service for Visually Impaired University Students

Science.gov (United States)

Tangsri, Chatcai; Na-Takuatoong, Onjaree; Sophatsathit, Peraphon

2013-01-01

This article aims to show how the process of new service technology-based development improves the current study support service for visually impaired university students. Numerous studies have contributed to improving assisted aid technology such as screen readers, the development and the use of audiobooks, and technology that supports individual…

Jordanian Social Studies Teachers' Perceptions of Competency Needed for Implementing Technology in the Classroom

Science.gov (United States)

Al Bataineh, Mohammad; Anderson, Sharon

2015-01-01

This study used a cross-sectional, ten-point Likert-type scale survey design, to examine the perception of Jordanian seventh to twelfth-grade social studies teachers of the competency needed for technology implementation in their classrooms. The instrument for this study was a modified version of a survey developed by Kelly (2003) called the…

A Study on the Linkage between Nano Fusion Technology and Nuclear Technology

International Nuclear Information System (INIS)

Jeong, Ik; Lim, Chae Young; Lee, Jong Hee

2009-02-01

1) A survey of national energy policy trends in major nation - to secure renewal energy in the level of making a plan to supply national energy in the future - Tendency of energy policy based on Europe 2) A survey of the nano technology development - Status of major nano technology development - Developmental direction of nano technology related to nuclear energy 3) the nano technology development related with nuclear - high-temperature nuclear reactor by applying nano science and technology under quick development - materials required to high-level radioactive wastes treatment facility - develop materials of nuclear fusion facility in the long-term view 4) Innovation system of nano technology - Energy source -> conversion to energy -> distribution of energy -> energy storage -> energy use

Technology and the Social Studies--Where We Were; Where We Are, Where We Are Going...

Science.gov (United States)

Mead-Mezzetta, Shirley

1986-01-01

Reviews the goals of the California State Department of Education's Technology in Curriculum (TIC) projects. Provides several examples of technology use and identifies several pieces of software which are being successfully used in high school social studies classes. (JDH)

Instrument for assessing mobile technology acceptability in diabetes self-management: a validation and reliability study.

Science.gov (United States)

Frandes, Mirela; Deiac, Anca V; Timar, Bogdan; Lungeanu, Diana

2017-01-01

Nowadays, mobile technologies are part of everyday life, but the lack of instruments to assess their acceptability for the management of chronic diseases makes their actual adoption for this purpose slow. The objective of this study was to develop a survey instrument for assessing patients' attitude toward and intention to use mobile technology for diabetes mellitus (DM) self-management, as well as to identify sociodemographic characteristics and quality of life factors that affect them. We first conducted the documentation and instrument design phases, which were subsequently followed by the pilot study and instrument validation. Afterward, the instrument was administered 103 patients (median age: 37 years; range: 18-65 years) diagnosed with type 1 or type 2 DM, who accepted to participate in the study. The reliability and construct validity were assessed by computing Cronbach's alpha and using factor analysis, respectively. The instrument included statements about the actual use of electronic devices for DM management, interaction between patient and physician, attitude toward using mobile technology, and quality of life evaluation. Cronbach's alpha was 0.9 for attitude toward using mobile technology and 0.97 for attitude toward using mobile device applications for DM self-management. Younger patients (Spearman's ρ =-0.429; P higher education level (Kendall's τ =0.51; P mobile assistive applications for DM control. Moreover, patients with a higher quality of life presented a significantly more positive attitude toward using modern technology (Spearman's ρ =0.466; P mobile technology for DM self-management. Additionally, we found that even if most of the patients showed positive attitude toward mobile applications, only a moderate level of intention to indeed use them was observed. Moreover, the study indicated that barriers were truthfulness and easiness to use.

Revolutionizing The Run: A Wearable Technology Study

OpenAIRE

Lindamood Jr, Stephen Douglas

2014-01-01

Recent advances in technology are reshaping and enhancing the role of the industrial designer. While industrial designers are already trained to be experts in process and possess a wide range of skills, there must be a higher level of fusion between design, science, and technology than ever before. This paradigm presents an opportunity in the emerging field of wearable technology; industrial design, engineering and computer science would be an optimal collaboration for the inevitable increase...

Plasma Science Committee (PLSC) and study on new opportunities in plasma science and technology

International Nuclear Information System (INIS)

1992-01-01

The Plasma Science Committee (PLSC) of the National Research Council (NRC) is charged with monitoring the health of the field of plasma science in the United States. Accordingly, the Committee identifies and examines both broad and specific issues affecting the field. Regular meetings, teleconferences, briefings from agencies and the scientific community, the formation of study panels to prepare reports, and special symposia are among the mechanisms used by the PLSC to meet its charge. This progress report presents a review of PLSC activities from July 15, 1991 to May 31, 1992. The details of prior activities are discussed in earlier reports. This report also includes the status of activities associated with the PLSC study on opportunities in plasma science and technology. During the above period, the PLSC has continued to track and participate in, when requested, discussions on the health of the field. Much of the perspective of the PLSC has been presented in the recently-published report Research Briefing on Contemporary Problems in Plasma Science. That report has served as the basis for briefings to representatives of the federal government as well as the community-at-large. In keeping with its charge to identify and highlight specific areas for scientific and technological opportunities, the PLSC completed publication of the report Plasma Processing of Materials: Scientific and Technological Opportunities and launched a study on new opportunities in plasma science and technology

DEVELOPMENT OF INFORMATION TECHNOLOGY STRATEGIC PLANNING FOR MANUFACTURING INDUSTRY (CASE STUDY: PT MCM

Directory of Open Access Journals (Sweden)

Leonardus Hardjo

2013-10-01

Full Text Available IT Department in PT MCM has to carry out the duties and functions of developing solution to support the business unit in their operation and gain some benefits which should be obtained by using IT in manufacturing such as increasing efficiency, improving the effectivity in making decision and helping to promote the products. This study aims to design information technology strategic planning in accordance with the strategic plan. The research method is using the IT Strategic Planning framework of Alex Cullen and Marc Cecere. This study uses SWOT and IT Balanced Scorecard to analyze the needs of IT at PT MCM. The results of this study are recommended strategic steps to optimize the implementation of IT in the company to improve the performance from IT division to obtain the benefits by implementing IT in manufacturing and to form IT Blueprint, which is part of the information technology strategic plan in PT MCM.

Value engineering study for seletion of verticle barrier technology at a Superfund site

International Nuclear Information System (INIS)

Bryan, E.E.; Guglielmetti, J.L.; Butler, P.B.; Brill, M.P.

1997-01-01

A value engineering (VE) study was conducted to identify and evaluate vertical barrier technologies and alignments for a Superfund project in New Castle County, Delaware. The objective was to select and recommend the most appropriate vertical barrier(s) for two separate landfills and a portion of the manufacturing plant on the site. A VE team was assembled to identify and evaluate site specific issues related to effectiveness, constructability and cost for numerous vertical barrier technologies. Several cost-effective alternatives were identified that met project objectives. The VE study concluded that a composite vertical barrier system consisting of a soil-bentonite slurry trench and steel sheet piles would provide effective containment of the North Landfill. Additionally, the geologic confining unit specified in the Record of Decision (ROD) was found to be unsuitable as a vertical barrier key and a more suitable, shallow confining unit was discovered. This paper describes the value engineering process and results of the VE study for one of the landfills

Meeting Extension Programming Needs with Technology: A Case Study of Agritourism Webinars

Science.gov (United States)

Rich, Samantha Rozier; Komar, Stephen; Schilling, Brian; Tomas, Stacy R.; Carleo, Jenny; Colucci, Susan J.

2011-01-01

As clientele needs diversify, Extension educators are examining new technologies, including online tools, to deliver educational programming and resources. Using agritourism as the educational topic, the study reported here sought to evaluate participants' acceptance of online educational programming (webinars) and the effectiveness of the…

Characterization and assessment of novel bulk storage technologies : a study for the DOE Energy Storage Systems program.

Energy Technology Data Exchange (ETDEWEB)

Huff, Georgianne; Tong, Nellie (KEMA Consulting, Fairfax, VA); Fioravanti, Richard (KEMA Consulting, Fairfax, VA); Gordon, Paul (Sentech/SRA International, Bethesda, MD); Markel, Larry (Sentech/SRA International, Bethesda, MD); Agrawal, Poonum (Sentech/SRA International, Bethesda, MD); Nourai, Ali (KEMA Consulting, Fairfax, VA)

2011-04-01

This paper reports the results of a high-level study to assess the technological readiness and technical and economic feasibility of 17 novel bulk energy storage technologies. The novel technologies assessed were variations of either pumped storage hydropower (PSH) or compressed air energy storage (CAES). The report also identifies major technological gaps and barriers to the commercialization of each technology. Recommendations as to where future R&D efforts for the various technologies are also provided based on each technology's technological readiness and the expected time to commercialization (short, medium, or long term). The U.S. Department of Energy (DOE) commissioned this assessment of novel concepts in large-scale energy storage to aid in future program planning of its Energy Storage Program. The intent of the study is to determine if any new but still unproven bulk energy storage concepts merit government support to investigate their technical and economic feasibility or to speed their commercialization. The study focuses on compressed air energy storage (CAES) and pumped storage hydropower (PSH). It identifies relevant applications for bulk storage, defines the associated technical requirements, characterizes and assesses the feasibility of the proposed new concepts to address these requirements, identifies gaps and barriers, and recommends the type of government support and research and development (R&D) needed to accelerate the commercialization of these technologies.

A Study on the Planning of Technology Development and Research for Generation IV Nuclear Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

2005-08-15

This study aimed at the planning the domestic technology development of the Gen IV and the formulating the international collaborative project contents and executive plan for 'A Validity Assessment and Policies of the R and D of Generation IV Nuclear Energy Systems'. The results of the study include follows; - Survey of the technology state in the fields of the Gen IV system specific technologies and the common technologies, and the plans of the international collaborative research - Drawing up the executive research and development plan by the experts of the relevant technology field for the systems which Korean will participate in. - Formulating the effective conduction plan of the program reflecting the view of the experts from the industry, the university and the research institute. - Establishing the plan for estimation of the research fund and the manpower for the efficient utilization of the domestic available resources. This study can be useful material for evaluating the appropriateness of the Korea's participation in the international collaborative development of the Gen IV, and can be valuably utilized to establish the strategy for the effective conduction of the program. The executive plan of the research and development which was produced in this study will be used to the basic materials for the establishing the guiding direction and the strategic conduction of the program when the research and development is launched in the future.

Knowledge flows : analyzing the core literature of innovation, entrepreneurship and science and technology studies

NARCIS (Netherlands)

Bhupatiraju, S.; Nomaler, Z.O.; Triulzi, G.; Verspagen, B.

2012-01-01

This paper applies network analysis to a citation database that combines the key references in the fields of Entrepreneurship (ENT), Innovation Studies (INN) and Science and Technology Studies (STS). We find that citations between the three fields are relatively scarce, as compared to citations

Examining the Teaching of Science, and Technology and Engineering Content and Practices: An Instrument Modification Study

Science.gov (United States)

Love, Tyler S.; Wells, John G.; Parkes, Kelly A.

2017-01-01

A modified Reformed Teaching Observation Protocol (RTOP) (Piburn & Sawada, 2000) instrument was used to separately examine eight technology and engineering (T&E) educators' teaching of science, and T&E content and practices, as called for by the "Standards for Technological Literacy: Content for the Study of Technology"…

A comparison of dental ultrasonic technologies on subgingival calculus removal: a pilot study.

Science.gov (United States)

Silva, Lidia Brión; Hodges, Kathleen O; Calley, Kristin Hamman; Seikel, John A

2012-01-01

This pilot study compared the clinical endpoints of the magnetostrictive and piezoelectric ultrasonic instruments on calculus removal. The null hypothesis stated that there is no statistically significant difference in calculus removal between the 2 instruments. A quasi-experimental pre- and post-test design was used. Eighteen participants were included. The magnetostrictive and piezoelectric ultrasonic instruments were used in 2 assigned contra-lateral quadrants on each participant. A data collector, blind to treatment assignment, assessed the calculus on 6 predetermined tooth sites before and after ultrasonic instrumentation. Calculus size was evaluated using ordinal measurements on a 4 point scale (0, 1, 2, 3). Subjects were required to have size 2 or 3 calculus deposit on the 6 predetermined sites. One clinician instrumented the pre-assigned quadrants. A maximum time of 20 minutes of instrumentation was allowed with each technology. Immediately after instrumentation, the data collector then conducted the post-test calculus evaluation. The repeated analysis of variance (ANOVA) was used to analyze the pre- and post-test calculus data (p≤0.05). The null hypothesis was accepted indicating that there is no statistically significant difference in calculus removal when comparing technologies (p≤0.05). Therefore, under similar conditions, both technologies removed the same amount of calculus. This research design could be used as a foundation for continued research in this field. Future studies include implementing this study design with a larger sample size and/or modifying the study design to include multiple clinicians who are data collectors. Also, deposit removal with periodontal maintenance patients could be explored.

A study of the historical role of African Americans in science, engineering and technology

Science.gov (United States)

Jones, Keith Wayne

2000-11-01

The purpose of this study was to determine if there is adequate documentation of an historical role of African and African American involvement in science, engineering, and technology. Through the use of history of science and technology research methodology, along with an examination of the sociological and economic impacts of adequately accredited innovations and inventions contributed by Africans and African Americans, the researcher investigated their contributions to the following areas of science and technology: life science, physical sciences and chemistry, engineering, and science education. In regard to the timeframe for this study, the researcher specifically investigated African and African American involvement in science and technology that includes periods prior to black enslavement, scientific racism and colonialism, as well as during and after those periods. This research study reveals that there are adequate historical data regarding African and African American contributions to science, engineering, and technology. The data reveals that for many millennia African peoples have been continually involved in science and world science histories. The data further show that the numbers of African Americans acquiring BS, MS, Ph.D., Doctor of Science and Doctor of Engineering degrees in science and engineering disciplines are increasing. That these increases are not happening at a rate representative of the present or future African American percentages of the population. Consequently, because of future changes in our nation's demographics, increasing the numbers of people from under-represented groups who pursue scientific and engineering professions has become a matter of national security at the highest levels of government. Moreover, African Americans, Hispanics, and Native Americans are not pursuing careers or taking courses in science and engineering at a rate high enough to fulfill the prospective needs for the United States' industries, government

Renewable energy technology feasibility study for a new hotel building in Amsterdam

NARCIS (Netherlands)

Bischoff, J.M.A.; Hensen, J.L.M.; Hassan Mohamed, Mohamed; Philips, C.

2016-01-01

This article discusses the economic and environmental feasibility of applying renewable energy technology (RET) to a new hotel building in Amsterdam using the simulation software HOMER. The study shows that applying PV including a surface up to 750m² can be both economical and environmentally

Acceptance of a new technology for management of obstetric hemorrhage: a qualitative study from rural Mexico.

Science.gov (United States)

Berdichevsky, Karla; Tucker, Christine; Martínez, Alberto; Miller, Suellen

2010-05-01

We conducted a qualitative study to explore responses to a low-technology first-aid device for management of life-threatening obstetric hemorrhage in rural health facilities in Mexico. This entailed in-depth, semistructured interviews with clinical and administrative staff (n = 70) involved in pilot studies of the nonpneumatic antishock garment (NASG) at primary health care facilities and rural hospitals. We found that staffs' response fell into four categories: owning, doubting, resisting, and rejecting. Overall, there were positive reactions to the garment as a relevant technology for saving women's lives. Findings will be used for future implementation of the garment and other new technologies.

Allocation of Tutors and Study Centers in Distance Learning Using Geospatial Technologies

Directory of Open Access Journals (Sweden)

Shahid Nawaz Khan

2018-05-01

Full Text Available Allama Iqbal Open University (AIOU is Pakistan’s largest distance learning institute, providing education to 1.4 million students. This is a fairly large setup across a country where students are highly geographically distributed. Currently, the system works using a manual approach, which is not efficient. Allocation of tutors and study centers to students plays a key role in creating a better learning environment for distance learning. Assigning tutors and study centers to distance learning students is a challenging task when there is a huge geographic spread. Using geospatial technologies in open and distance learning can fix allocation problems. This research analyzes real data from the twin cities Islamabad and Rawalpindi. The results show that geospatial technologies can be used for efficient and proper resource utilization and allocation, which in turn can save time and money. The overall idea fits into an improved distance learning framework and related analytics.

Cogeneration Technology Alternatives Study (CTAS). Volume 3: Energy conversion system characteristics

Science.gov (United States)

1980-01-01

Six current and thirty-six advanced energy conversion systems were defined and combined with appropriate balance of plant equipment. Twenty-six industrial processes were selected from among the high energy consuming industries to serve as a frame work for the study. Each conversion system was analyzed as a cogenerator with each industrial plant. Fuel consumption, costs, and environmental intrusion were evaluated and compared to corresponding traditional values. The advanced energy conversion technologies indicated reduced fuel consumption, costs, and emissions. Fuel energy savings of 10 to 25 percent were predicted compared to traditional on site furnaces and utility electricity. With the variety of industrial requirements, each advanced technology had attractive applications. Fuel cells indicated the greatest fuel energy savings and emission reductions. Gas turbines and combined cycles indicated high overall annual savings. Steam turbines and gas turbines produced high estimated returns. In some applications, diesels were most efficient. The advanced technologies used coal derived fuels, or coal with advanced fluid bed combustion or on site gasifications. Data and information for both current and advanced energy conversion technology are presented. Schematic and physical descriptions, performance data, equipment cost estimates, and predicted emissions are included. Technical developments which are needed to achieve commercialization in the 1985-2000 period are identified.

Modeling methods for systems study of geomechanical and mining technological objects

Energy Technology Data Exchange (ETDEWEB)

Glazov, D D

1983-01-01

Of the basic classes of problems solved during the accepted systems examination of the results of full scale, laboratory and analytical studies, the following are noted: the problems of detecting patterns in the limited empirical base and isolating new physical content in the phenomena which have not received effective explanation within the exhaustive use of the arsenal of traditional methods and techniques; problems for describing the subject field of complex natural systems through isolating their system models in the chaos of contradictory information as the bases for building automated systems for decision making; terminological questions; problems in determining the systems parameters and building structural models of new technologies which provide for dividing the physical effect by levels of geomechanical systems. Thus, at the present time studies of multilevel accepted models of organization of geomechanical systems are interpreted in new methods of structuring by an explosion of roofs difficult to collapse based on its screen creating and multiscreen grinding effect, introduced jointly by the DonUGI at the mines of the Donbass, and new methods for building technological systems for passage by complexes of geological disruptions introduced jointly with the IGD im. Skochinskiy in the Kuzbass and in the Mosbass.

Technological Capability Upgrading and Entrepreneurship: Case Study of Selected Indonesian Fish Processing Companies

Directory of Open Access Journals (Sweden)

Erman Aminullah

2016-07-01

Full Text Available This study analyzes the technological capability upgrading and entrepreneurship in the Indonesian fish processing industry. The analysis viewed from the Sectoral Innovation System (SIS focuses on two aspects: the enabling factors for innovation, and the role of entrepreneur in technological capability upgrading. The study finds that Indonesian fish processing companies: (i are less interactive with local universities or other STI (science, technology and innovation centers, and innovation was mostly done through learning by DUI (doing, using and interacting; (ii are characterized as low-tech industries with a high standard for food safety and product differentiation; (iii apply adaptive innovation, modified from existing technology or knowledge, except for the leading companies who apply innovation for new products in the market; (iv actors, technology, market trends, and networks are the main enabling factors for innovation; and (v the role of entrepreneurs – especially in building entrepreneurial networks – were dominant in the leading companies. The entrepreneurial networks exist and work in global distribution chains that are widely adopted by companies to export their products through buyer–producer relationships. The pathways toward export markets are: global born directly, fastly learned global, and delay learned global companies. These categories have enriched the Mets category (2012. The policy implications of the findings for government should: (i facilitate companies’ interaction with local universities or other STI centers; and (ii encourage domestic companies to improve their competitiveness by shifting to higher added value products through various innovations and trading policy schemes.

A study on organizational culture, structure and information technology as three KM enablers: A case study in five Iranian medical and healthcare research centers

Directory of Open Access Journals (Sweden)

Mahdi Iran-nejad-parizi

2013-01-01

Full Text Available This study investigates organizational structure, culture, and information technology as knowledge management (KM infrastructural capabilities, and compares their significance and status quo in five medical research centers in Tehran, Iran. Objectives of this research were pursued by employing two statistical methods, regression analysis and Friedman test. Included in the study were 135 people (researchers and support staff from five medical and healthcare research centers of Tehran. A survey questionnaire including 23 questions was utilized to examine organizational structure, culture and information technology indicators. And another 12 questions examined KM effectiveness. The Friedman test indicated that in terms of their status quo, the three studied KM enablers are at different conditions, with organizational culture having the best (mean rank=1.79 and IT the worst (mean rank=2.14 status. Moreover, it was revealed by regression analysis that organizational structure is believed to have the most significant impact (Beta= 0.397 on the effectiveness of knowledge management initiatives, while information technology gained the least perceived impact (Beta= 0.176.

Perspectives of Family Members on Using Technology in Youth Mental Health Care: A Qualitative Study.

Science.gov (United States)

Lal, Shalini; Daniel, Winnie; Rivard, Lysanne

2017-06-23

Information and communication technologies (ICTs) are increasingly recognized as having an important role in the delivery of mental health services for youth. Recent studies have evaluated young people's access and use of technology, as well as their perspectives on using technology to receive mental health information, services, and support; however, limited attention has been given to the perspectives of family members in this regard. The aim of this study was to explore the perspectives of family members on the use of ICTs to deliver mental health services to youth within the context of specialized early intervention for a first-episode psychosis (FEP). Six focus groups were conducted with family members recruited from an early intervention program for psychosis. Twelve family members participated in the study (target sample was 12-18, and recruitment efforts took place over the duration of 1 year). A 12-item semistructured focus group guide was developed to explore past experiences of technology and recommendations for the use of technology in youth mental health service delivery. A qualitative thematic analysis guided the identification and organization of common themes and patterns identified across the dataset. Findings were organized by the following themes: access and use of technology, potential negative impacts of technology on youth in recovery, potential benefits of using technology to deliver mental health services to youth, and recommendations to use technology for (1) providing quality information in a manner that is accessible to individuals of diverse socioeconomic backgrounds, (2) facilitating communication with health care professionals and services, and (3) increasing access to peer support. To our knowledge, this is among the first (or the first) to explore the perspectives of family members of youth being treated for FEP on the use of technology for mental health care. Our results highlight the importance of considering diverse experiences

ALTERNATIVE REMEDIATION TECHNOLOGY STUDY FOR GROUNDWATER TREATMENT AT 200-PO-1 OPERABLE UNIT AT HANFORD SITE

Energy Technology Data Exchange (ETDEWEB)

DADO MA

2008-07-31

This study focuses on the remediation methods and technologies applicable for use at 200-PO-I Groundwater Operable Unit (OU) at the Hanford Site. The 200-PO-I Groundwater au requires groundwater remediation because of the existence of contaminants of potential concern (COPC). A screening was conducted on alternative technologies and methods of remediation to determine which show the most potential for remediation of groundwater contaminants. The possible technologies were screened to determine which would be suggested for further study and which were not applicable for groundwater remediation. COPCs determined by the Hanford Site groundwater monitoring were grouped into categories based on properties linking them by remediation methods applicable to each COPC group. The screening considered the following criteria. (1) Determine if the suggested method or technology can be used for the specific contaminants found in groundwater and if the technology can be applied at the 200-PO-I Groundwater au, based on physical characteristics such as geology and depth to groundwater. (2) Evaluate screened technologies based on testing and development stages, effectiveness, implementability, cost, and time. This report documents the results of an intern research project conducted by Mathew Dado for Central Plateau Remediation in the Soil and Groundwater Remediation Project. The study was conducted under the technical supervision of Gloria Cummins and management supervision of Theresa Bergman and Becky Austin.

Infusing Technology Driven Design Thinking in Industrial Design Education: A Case Study

Science.gov (United States)

Mubin, Omar; Novoa, Mauricio; Al Mahmud, Abdullah

2017-01-01

Purpose: This paper narrates a case study on design thinking-based education work in an industrial design honours program. Student projects were developed in a multi-disciplinary setting across a Computing and Engineering faculty that allowed promoting technologically and user-driven innovation strategies. Design/methodology/approach: A renewed…

Concepts and contexts in engineering and technology education : An international and interdisciplinary Delphi study

NARCIS (Netherlands)

Rossouw, A.; Hacker, M.; De Vries, M.J.

2010-01-01

Inspired by a similar study by Osborne et al. we have conducted a Delphi study among experts to identify key concepts to be taught in engineering and technology education and relevant and meaningful contexts through which these concepts can be taught and learnt. By submitting the outcomes of the

A Phenomenographic Study of Lecturers' Conceptions of Using Learning Technology in a Pakistani Context

Science.gov (United States)

Hodgson, Vivien; Shah, Uzair

2017-01-01

While there are many studies exploring the phenomenon of lecturers' use of learning technology within teaching practices in western higher education contexts, currently we know little about this phenomenon within less developed countries. In the paper, we discuss the findings from a phenomenographic study of lecturers' conceptions of using…

When a mature technology company pivots: A case study of Logitech

OpenAIRE

Anderson Darrell; Daniel Johnson

2016-01-01

Life cycle theory has been shown to be an important explanation of the relationship between sales and stock prices. This study explores how the technology company Logitech attempted a transition from a mature life-cycle company in computer peripherals to a growth company in the music, tablet, and gaming industries. We show that stock price correlates with accounting performance differently across the company’s life cycle.

Factors affecting the educational achievement of mature Māori information technology students: A case study

Directory of Open Access Journals (Sweden)

Blain Harre Rakena

Full Text Available This paper reports on the results of an investigation into the experiences of academically successful adult Māori students undertaking the Bachelor of Information Technology (BIT programme at the Waikato Institute of Technology (Wintec. This research looked at the participants\\' motivation for attending Wintec, the barriers (such as financial, social and family hardships they encountered as they made the transition back to full time study, and their experiences at Wintec. The paper considers the reasons why the participants have achieved well, identifies the support systems they called on, and explores the challenges that they experienced while studying in a tertiary learning environment. Its significance lies in the focus on factors that affect Māori academic success, specifically in information technology, so that teaching approaches and support systems, particularly in the institute of technology and polytechnic (ITP sector, can enhance the success of Māori in the field of IT.

Cooperation, Technology, and Performance: A Case Study.

Science.gov (United States)

Cavanagh, Thomas; Dickenson, Sabrina; Brandt, Suzanne

1999-01-01

Describes the CTP (Cooperation, Technology, and Performance) model and explains how it is used by the Department of Veterans Affairs-Veteran's Benefit Administration (VBA) for training. Discusses task analysis; computer-based training; cooperative-based learning environments; technology-based learning; performance-assessment methods; courseware…

Survey and studies on the roles of nuclear power development in economy and technology

International Nuclear Information System (INIS)

1985-01-01

The development and utilization of nuclear energy is principally for security of energy supplies but, on the other hand, is contributing largely to the economic activities and technology developments in Japan. In order to clarify the economic and the technological roles played by the nuclear energy development and utilization, Atomic Energy Commission has made survey and studies on the present state of nuclear power industry and of nuclear power technology and the respective effects in other areas. The nuclear power industry, through its high growth, is now a substantial portion, and so has significant influence, in Japan's whole economic activities. Then, the nuclear power technology, started with its introduction, is now on the world's leading level. Its effects in other areas include quality control, system technology, etc. (Mori, K.)

Studies on fundamental technologies for producing tokamak-plasma

International Nuclear Information System (INIS)

Matsuzaki, Yoshimi

1987-10-01

The report describes studies on fundamental technologies to produce tokamak-plasma of the JFT-2 and JFT-2M tokamaks. (1) In order to measure the particle number of residual gases, calibration methods of vacuum gauges have been developed. (2) Devices for a Taylor-type discharge cleaning (TDC), a glow discharge cleaning (GDC) and ECR discharge cleaning (ECR-DC) have been made and the cleaning effects have been investigated. In TDC the most effective plasma for cleaning is obtained in the plasma with 5 eV of electron temperature. GDC is effective in removing carbon impurities, but is less effective for removing oxygen impurities. ECR-DC has nearly the similar effect as TDC. The cleaning effect of these three types were studied by comparing the properties of resulting tokamak plasmas in the JFT-2M tokamak. (3) Experimental studies of pre-ionization showed as following results; A simple pre-ionization equipment as a hot-electron-gun and a J x B gun was effective in reducing breakdown voltage. An ordinary mode wave of the electron cyclotron frequency was very effective for pre-ionization. The RF power whose density is 3.6 x 10 -2 W/cm 3 produced plasma of an electron density of 5 x 10 11 cm -3 . In this case, it is possible to start up with negligible consumption of the magnetic flux caused by the plasma resistance. (4) Concerning to studies on plasma control, the following results were obtained; In order to obtain constant plasma current, a pulse forming network was constructed and sufficient constant plasma current was achieved. In applying an iso-flux method for measuring the plasma position, it is no problem practically to use only one loop-coil and one magnetic probe. (author)

Different methods for ethical analysis in health technology assessment: an empirical study.

Science.gov (United States)

Saarni, Samuli I; Braunack-Mayer, Annette; Hofmann, Bjørn; van der Wilt, Gert Jan

2011-10-01

Ethical analysis can highlight important ethical issues related to implementing a technology, values inherent in the technology itself, and value-decisions underlying the health technology assessment (HTA) process. Ethical analysis is a well-acknowledged part of HTA, yet seldom included in practice. One reason for this is lack of knowledge about the properties and differences between the methods available. This study compares different methods for ethical analysis within HTA. Ethical issues related to bariatric (obesity) surgery were independently evaluated using axiological, casuist, principlist, and EUnetHTA models for ethical analysis within HTA. The methods and results are presented and compared. Despite varying theoretical underpinnings and practical approaches, the four methods identified similar themes: personal responsibility, self-infliction, discrimination, justice, public funding, and stakeholder involvement. The axiological and EUnetHTA models identified a wider range of arguments, whereas casuistry and principlism concentrated more on analyzing a narrower set of arguments deemed more important. Different methods can be successfully used for conducting ethical analysis within HTA. Although our study does not show that different methods in ethics always produce similar results, it supports the view that different methods of ethics can yield relevantly similar results. This suggests that the key conclusions of ethical analyses within HTA can be transferable between methods and countries. The systematic and transparent use of some method of ethics appears more important than the choice of the exact method.

Study on the efficient export control for the Intangible Transfer of Technology

Energy Technology Data Exchange (ETDEWEB)

Yoon, Sung-ho; Choi, Sun-do; Lee, Chansuh; Kim, Jong-sook [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2015-10-15

Technical Data may take forms such as document, drawing, description, report, manual and instruction. And, it can be written or recorded on storage medium such as disk, tape and read-only memories. Technical assistance may take forms such as instruction, skill, training, working knowledge and consulting services. Technical data or assistance can be transferred by intangible manners such as an electronic means (e.g. email, internet, telephone or fax) and through the oral (e.g. seminar, meeting or workshop). Currently, ROK's export control regulation is not classified between the transfer of listed items (or general technology) and intangible transfer of technology (ITT). It may make a loop hole or cause inefficient implementation of export control. The purpose of this study is to suggest the efficient control method for ITT independent from item control method. From the result of this study, several main feathers in regulations of developed countries are drawn. First, they define that technical assistance (or support) is the object of permission. And, they have a clear distinction between resident and non-resident. Second, The UK and Germany do not control the technical assistance related to construction and operation of nuclear facilities for peaceful use, as long as technology does not transfer to recipient that has a nuclear proliferation concerns such as the DPRK, Iran or Pakistan.

Field study of wastes from fluidized-bed combustion technologies

International Nuclear Information System (INIS)

Weinberg, A.; Holcombe, L.; Butler, R.

1991-01-01

The Department of Energy (DOE) has undertaken a research project to monitor advanced coal process wastes placed in natural geologic settings. The overall objective of the study is to gather field data on the engineering and environmental performance of disposed solid waste from various advanced coal processes. The coal ash from a fluidized-bed combustion unit is being studied as part of the DOE program. The unit is a 110-MW circulating fluidized bed (CFB) at Colorado Ute Electric Association's Nucla Steam Electric Station, which is being demonstrated with the support of the DOE Clean Coal Technology Program. The Electric Power Research Institute is cofunding the study. In June of 1989, a test cell approximately 100 feet square and 8 feet deep was constructed and filled with ash from the Colorado Ute CFB unit. The cell was instrumented with lysimeters and neutron probe access tubes to monitor water flow and leachate chemistry in the ash; groundwater wells and runoff collection devices were installed to determine the effects on groundwater and surface water quality, and a meteorological station was installed to determine the water balance. Additionally, tests are being performed to evaluate the chemical, physical, and mineralogical properties of the solid waste and geologic materials. Results from the first year of monitoring are presented

Pediatric eMental healthcare technologies: a systematic review of implementation foci in research studies, and government and organizational documents.

Science.gov (United States)

Gehring, Nicole D; McGrath, Patrick; Wozney, Lori; Soleimani, Amir; Bennett, Kathryn; Hartling, Lisa; Huguet, Anna; Dyson, Michele P; Newton, Amanda S

2017-06-21

Researchers, healthcare planners, and policymakers convey a sense of urgency in using eMental healthcare technologies to improve pediatric mental healthcare availability and access. Yet, different stakeholders may focus on different aspects of implementation. We conducted a systematic review to identify implementation foci in research studies and government/organizational documents for eMental healthcare technologies for pediatric mental healthcare. A search of eleven electronic databases and grey literature was conducted. We included research studies and documents from organization and government websites if the focus included eMental healthcare technology for children/adolescents (0-18 years), and implementation was studied and reported (research studies) or goals/recommendations regarding implementation were made (documents). We assessed study quality using the Mixed Methods Appraisal Tool and document quality using the Appraisal of Guidelines for Research & Evaluation II. Implementation information was grouped according to Proctor and colleagues' implementation outcomes-acceptability, adoption, appropriateness, cost, feasibility, fidelity, penetration, and sustainability-and grouped separately for studies and documents. Twenty research studies and nine government/organizational documents met eligibility criteria. These articles represented implementation of eMental healthcare technologies in the USA (14 studies), United Kingdom (2 documents, 3 studies), Canada (2 documents, 1 study), Australia (4 documents, 1 study), New Zealand (1 study), and the Netherlands (1 document). The quality of research studies was excellent (n = 11), good (n = 6), and poor (n = 1). These eMental health studies focused on the acceptability (70%, n = 14) and appropriateness (50%, n = 10) of eMental healthcare technologies to users and mental healthcare professionals. The quality of government and organizational documents was high (n = 2), medium (n = 6

Technologies for physical activity self-monitoring: a study of differences between users and non-users

Directory of Open Access Journals (Sweden)

Åkerberg A

2017-02-01

Full Text Available Anna Åkerberg,1,2 Anne Söderlund,2 Maria Lindén1 1School of Innovation, Design and Engineering, 2School of Health, Care and Social Welfare, Mälardalen University, Västerås, Sweden Background: Different kinds of physical activity (PA self-monitoring technologies are used today to monitor and motivate PA behavior change. The user focus is essential in the development process of this technology, including potential future users such as representatives from the group of non-users. There is also a need to study whether there are differences between the groups of users and non-users. The aims of this study were to investigate possible differences between users and non-users regarding their opinions about PA self-monitoring technologies and to investigate differences in demographic variables between the groups. Materials and methods: Participants were randomly selected from seven municipalities in central Sweden. In total, 107 adults responded to the Physical Activity Products Questionnaire, which consisted of 22 questions. Results: Significant differences between the users and non-users were shown for six of the 20 measurement-related items: measures accurately (p=0.007, measures with high precision (p=0.024, measures distance (p=0.020, measures speed (p=0.003, shows minutes of activity (p=0.004, and shows geographical position (p=0.000. Significant differences between the users and non-users were also found for two of the 29 encouragement items: measures accurately (p=0.001 and has long-term memory (p=0.019. Significant differences between the groups were also shown for level of education (p=0.030 and level of physical exercise (p=0.037. Conclusion: With a few exceptions, the users and the non-users in this study had similar opinions about PA self-monitoring technologies. Because this study showed significant differences regarding level of education and level of physical exercise, these demographic variables seemed more relevant to investigate

Interim report deliverable 3.2 : focus group management process of the restricted use technology study

Science.gov (United States)

2005-09-30

The Altarum Institute, under contract to the Michigan Department of Transportation (MDOT), currently is engaged in a project called the Altarum Restricted Use Technology Study. This study, an 18-month effort, seeks to apply restricted use techn...

Making sense of a new technology in clinical practice: a qualitative study of patient and physician perspectives.

Science.gov (United States)

Pals, Regitze A S; Hansen, Ulla M; Johansen, Clea B; Hansen, Christian S; Jørgensen, Marit E; Fleischer, Jesper; Willaing, Ingrid

2015-09-22

The number of new technologies for risk assessment available in health care is increasing. These technologies are intended to contribute to both improved care practices and improved patient outcomes. To do so however, there is a need to study how new technologies are understood and interpreted by users in clinical practice. The objective of this study was to explore patient and physician perspectives on the usefulness of a new technology to detect Cardiovascular Autonomic Neuropathy (CAN) in a specialist diabetes clinic. The technology is a handheld device that measures resting heart rate and conducts three cardiac autonomic reflex tests to evaluate heart rate variability. The study relied on three sources of data: observations of medical consultations where results of the CAN test were reported (n = 8); interviews with patients who had received the CAN test (n = 19); and interviews with physicians who reported results of the CAN test (n = 9). Data were collected at the specialist diabetes clinic between November 2013 and January 2014. Data were analysed using the concept of technological frames which is used to assess how physicians and patients understand and interpret the new technology. Physicians generally found it difficult to communicate test results to patients in terms that patients could understand and to translate results into meaningful implications for the treatment of patients. Results of the study indicate that patients did not recall having done the CAN test nor recall receiving the results. Furthermore, patients were generally unsure about the purpose of the CAN test and the implications of the results. Involving patients and physicians is essential when a new technology is introduced in clinical practice. This particularly includes the interpretation and communication processes related to its use. The integration of a new risk assessment technology into clinical practice can be accompanied by several challenges. It is suggested that

A Study of the Relationship between Information Technology and Changes in Culture and Social Relationships

Directory of Open Access Journals (Sweden)

Hosein Ebrahimabadi

2014-03-01

Full Text Available Information technology and its consequent virtual space are opening up a new sphere in psychological, sociological and cultural studies associated with the mutual effect of technology, culture and human beings in general, and the interaction of cyberspace and culture, identity and human relationships. Recent studies in this field should be examined at least to realize whether the psychological and social outcomes and the pathology of virtual spaces are the result of the overflow of problems and issues of society and the real space into virtual space, and to decide if the challenges and the social problems in question are due to the development and growth of electronic media and virtual space? While describing and explaining  the effect of culture, society and their consequent traditions on virtual spaces, relationships and their content, and examining the effect of virtual space on culture, social actions, identity, attitudes and individual and collective behavior, the present article stresses that considering the short history and the little experience of the interaction between human and information technology and virtual space, it seems too soon to speak decisively about the outcomes of information technology and virtual spaces. Therefore, two principles are suggested to be established in cultural and social research on cyberspace. First, in the study of virtual space, priorities should be identified correctly and one should not merely focus on the problems resulting from information and communication technology instead of dealing with fundamental issues. Second, both in the theoretical and the methodological aspects of studies on virtual space, in different social and cultural spheres, one cannot rely merely on traditional theories and method, and new methods, in terms of theory, methodology and tools, should be applied.

Reservoir Maintenance and Development Task Report for the DOE Geothermal Technologies Office GeoVision Study.

Energy Technology Data Exchange (ETDEWEB)

Lowry, Thomas Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Finger, John T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Carrigan, Charles R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Foris, Adam [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kennedy, Mack B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Corbet, Thomas F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Doughty, Christine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Pye, Steven [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sonnenthal, Eric L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-09-01

This report documents the key findings from the Reservoir Maintenance and Development (RM&D) Task of the U.S. Department of Energy's (DOE), Geothermal Technologies Office (GTO) Geothermal Vision Study (GeoVision Study). The GeoVision Study had the objective of conducting analyses of future geothermal growth based on sets of current and future geothermal technology developments. The RM&D Task is one of seven tasks within the GeoVision Study with the others being, Exploration and Confirmation, Potential to Penetration, Institutional Market Barriers, Environmental and Social Impacts, Thermal Applications, and Hybrid Systems. The full set of findings and the details of the GeoVision Study can be found in the final GeoVision Study report on the DOE-GTO website. As applied here, RM&D refers to the activities associated with developing, exploiting, and maintaining a known geothermal resource. It assumes that the site has already been vetted and that the resource has been evaluated to be of sufficient quality to move towards full-scale development. It also assumes that the resource is to be developed for power generation, as opposed to low-temperature or direct use applications. This document presents the key factors influencing RM&D from both a technological and operational standpoint and provides a baseline of its current state. It also looks forward to describe areas of research and development that must be pursued if the development geothermal energy is to reach its full potential.

A study on international nuclear cooperation and technology self-reliance strategies for nuclear development in other countries

International Nuclear Information System (INIS)

Choi, Young Myung; Han, Pil Soon; Park, Yun Sik; Song, Ki Dong; Yang, Mang Ho; Oh, Keun Bae; Jang, Hong Lae; Lee, Dong Jin; Lee, Kang Suk; Kim, Sung Ki; Ko, Han Suk

1993-12-01

This study deals with international nuclear cooperation and technology self-reliance for nuclear development in other countries. This study also analyses the international and domestic nuclear environment such as NPT, nuclear export control, gloval environmental issues, and public acceptance. Finally, a suggestion is made for the future direction of strategy for nuclear technology self-reliance in Korea. (Author)

A Study on the Impact of Teacher Attitude/Efficacy on the Use of Classroom Technology

Science.gov (United States)

Ott, Jeran Louis

2017-01-01

Increased access to technology has changed the current educational landscape and, will dramatically affect the future of education. These shifts are redefining the roles of educators and require that teachers have the attributes necessary to legitimately incorporate technology into the classroom. The purpose of this study is to examine existing…

Can a Tablet Device Alter Undergraduate Science Students' Study Behavior and Use of Technology?

Science.gov (United States)

Morris, Neil P.; Ramsay, Luke; Chauhan, Vikesh

2012-01-01

This article reports findings from a study investigating undergraduate biological sciences students' use of technology and computer devices for learning and the effect of providing students with a tablet device. A controlled study was conducted to collect quantitative and qualitative data on the impact of a tablet device on students' use of…

Technology Transition and Adoption: A Study in Search of Metrics for Evaluating Transition

Science.gov (United States)

2010-12-01

develops a technology on time, within budget, and performs as advertised meets all conventional standards for success. However, if the technology gets...Model-Based Integration of Embedded Software ( MoBIES ) 0 USAF 1 0 0 0 0 76 Project Mobius: A Study on the Feasibility of Learning by Reading 0 0 0 1 0...Engine Generator (MSEG) Program 50 1 0 1,203 0 0 1 75 Model-Based Integration of Embedded Software ( MoBIES ) 45 1 0 1,659 0 0 1 76 Project Mobius: A

Glogsters and Other Motivating Technology: A Multiple Case Study of English Learners

Science.gov (United States)

Martinez-Alba, Gilda; Cruzado-Guerrero, Judith; Pitcher, Sharon

2014-01-01

The purpose of this study was to investigate how undergraduate Latino English learner (EL) students were motivated to read using technology by their teachers throughout their education. To examine this, they were interviewed, asked to perform a task that involved reading online, required to make a Glogster (an online interactive poster) about…

Examining Current Beliefs, Practices and Barriers about Technology Integration: A Case Study

Science.gov (United States)

Hsu, Pi-Sui

2016-01-01

The purpose of this mixed-methods study was to examine the current beliefs, practices and barriers concerning technology integration of Kindergarten through Grade Six teachers in the midwestern United States. The three data collection methods were online surveys with 152 teachers as well as interviews and observations with 8 teachers. The findings…

Integration of Study Abroad with Social Media Technologies and Decision-Making Applications

Science.gov (United States)

Deans, P. Candace

2012-01-01

This article describes the design and delivery of a program, "Global Business in a Digital World." The program integrates the use of social media technologies and business applications in a series of courses that include short-term study abroad components that focus on emerging markets. The objectives are to: (1) provide additional…

Case Study on the Impact of Technology on Incivility in Higher Education

Science.gov (United States)

Bartlett, Michelle E.; Bartlett, James E.

2016-01-01

A qualitative case study research design provided an in-depth perspective of the participants in relation to understanding the holistic impact technology has on the incivility of student-to-student and student-to-faculty interactions in higher education. The conceptual framework by Twale and Deluca (2008), based upon Salin's (2003) proposed model…

Northern gas fields and NGH technology. A feasibility study to develop natural gas hydrate technology for the international gas markets; Nordlige gassfelt and NGH-teknologi. En studie av muligheter for utvikling av naturgasshydratteknologi for det internasjonale gassmarked

Energy Technology Data Exchange (ETDEWEB)

Ramsland, Trond Ragnvald; Loy, Erik F.; Doesen, Sturle

1997-12-31

Two natural gas fields have been studied for three different technological solutions using two different economic theories. The aim was to examine whether a new technology for transporting natural gas, Natural Gas Hydrates (NGH), can compete with the existing technologies pipeline and Liquefied Natural Gas (LNG). Natural gas can rarely be used immediately after production and the supply systems can be divided into four interrelated parts: 1) Exploration. 2) Development and production. 3) Transportation. 4) Distribution. The emphasis in the study is on production costs and transportation. Exploration is assumed carried out and thus viewed sunk cost. Distribution from landing point to consumers is not part of the study. Production can take place either onshore or offshore, the natural gas can be transported to the market either by pipeline or ship and the costs are becoming more important as the distance from the fields to the markets increase. Natural gas projects have long lead times and large capital requirements. New supplies will materialise then if there is confidence that demand for the gas exists at a profitable price. Therefore natural gas is generally sold on long term contracts. The conclusions are that economies of scale exist and that pipeline is the superior technology for high volumes but cannot compete for smaller volumes where the LNG technology has been the best alternative. However, the report concludes that the NGH can compete fully. The distance to the market where the natural gas is to be transported is crucial for choice of transportation mode. The shipping modes are superior for long transportation distances. NGH is superior to LNG also with regards to distance. Despite that the two economic models used for the evaluation have provided very different absolute project values, they have provided the same conclusions about the ranking of the different technologies. It is clear then that if NGH technology is developed further into a reliable and

Enhancing international technology cooperation for climate change mitigation. Lessons from an electromobility case study

Energy Technology Data Exchange (ETDEWEB)

Bhasin, Shikha

2014-07-01

As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).

Enhancing international technology cooperation for climate change mitigation. Lessons from an electromobility case study

International Nuclear Information System (INIS)

Bhasin, Shikha

2014-01-01

As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).

ICT Use: Educational Technology and Library and Information Science Students' Perspectives--An Exploratory Study

Science.gov (United States)

Aharony, Noa; Shonfeld, Miri

2015-01-01

This study seeks to explore what factors influence students' ICT use and web technology competence. The objectives of this study are the following: (a) To what extent do certain elements of Rogers' (2003) Diffusion of Innovations Theory (DOI) explain students' ICT use, (b) To what extent do personality characteristics derived from the Big Five…

Study and Proposal of the Nuclear Power Plant Technology for the Ninh Thuan 2 Project

International Nuclear Information System (INIS)

Tran Chi Thanh; Le Van Hong; Hoang Sy Than; Nguyen Van De; Mai Dinh Trung; Nguyen Nhi Dien; Nguyen Minh Tuan; Pham Van Lam; Phan Ngoc Tuyen; Do Chi Dung; Hoang Minh Giang; Le Dai Dien

2015-01-01

The Ninh Thuan 1&2 Nuclear Power Plant Projects were approved on November 25th, 2009. At present, the task of NPP technology selection of these projects is an important and complex task. This report will show the acceptable method to create a set of criterion for selecting technology for Ninh Thuan 2 NPP project. The result of evaluation of three NPP technologies, such as ATMEA1, AP1000 and MPWR+ introduced in the Feasibility Study Reports of this project, will be discussed. In conclusion, the AP1000 technology is the first candidate for the Ninh Thuan 2 NPP Project. (author)

Follow-Up Study of 1983 Legal Technology Graduates. Volume 12, No. 14.

Science.gov (United States)

Hildebrandt, Sharrie; Lucas, John A.

A follow-up study was conducted at William Rainey Harper College (WRHC) to determine the employment and educational status of graduates of the Legal Technology (LTE) program 6 months after receiving their degree. Attempts were made to contact all 59 1983 LTE graduates for telephone interviews and compare their responses to findings from previous…

DWI-based neural fingerprinting technology: a preliminary study on stroke analysis.

Science.gov (United States)

Ye, Chenfei; Ma, Heather Ting; Wu, Jun; Yang, Pengfei; Chen, Xuhui; Yang, Zhengyi; Ma, Jingbo

2014-01-01

Stroke is a common neural disorder in neurology clinics. Magnetic resonance imaging (MRI) has become an important tool to assess the neural physiological changes under stroke, such as diffusion weighted imaging (DWI) and diffusion tensor imaging (DTI). Quantitative analysis of MRI images would help medical doctors to localize the stroke area in the diagnosis in terms of structural information and physiological characterization. However, current quantitative approaches can only provide localization of the disorder rather than measure physiological variation of subtypes of ischemic stroke. In the current study, we hypothesize that each kind of neural disorder would have its unique physiological characteristics, which could be reflected by DWI images on different gradients. Based on this hypothesis, a DWI-based neural fingerprinting technology was proposed to classify subtypes of ischemic stroke. The neural fingerprint was constructed by the signal intensity of the region of interest (ROI) on the DWI images under different gradients. The fingerprint derived from the manually drawn ROI could classify the subtypes with accuracy 100%. However, the classification accuracy was worse when using semiautomatic and automatic method in ROI segmentation. The preliminary results showed promising potential of DWI-based neural fingerprinting technology in stroke subtype classification. Further studies will be carried out for enhancing the fingerprinting accuracy and its application in other clinical practices.

A study on manufacturing and quality control technology of DUPIC fuel

Energy Technology Data Exchange (ETDEWEB)

Yang, Myung Seung; Park, H. S.; Lee, Y. W. [and others

1997-09-01

A series of experiments are performed to verify the manufacturability of DUPIC fuel and its performance by use of HANARO test reactor. Major works performed during this research period are : analysis of manufacturing process of DUPIC fuel, fabrication technology development such as development of disassembly and decladding method of spent PWR fuel, study on the OREOX process using simulated high burnup fuel, weldability of end cap weld, and development of fabrication equipment including the conceptual and detailed design of DUPIC equipment mainly for the powder preparation, pelletization and fuel element fabrication. A study on the material properties of DUPIC fuel and performance analysis method using irradiation of test fuel was also performed. (author). 91 refs., 274 tabs., 254 figs.

A study on manufacturing and quality control technology of DUPIC fuel

International Nuclear Information System (INIS)

Yang, Myung Seung; Park, H. S.; Lee, Y. W.

1997-09-01

A series of experiments are performed to verify the manufacturability of DUPIC fuel and its performance by use of HANARO test reactor. Major works performed during this research period are : analysis of manufacturing process of DUPIC fuel, fabrication technology development such as development of disassembly and decladding method of spent PWR fuel, study on the OREOX process using simulated high burnup fuel, weldability of end cap weld, and development of fabrication equipment including the conceptual and detailed design of DUPIC equipment mainly for the powder preparation, pelletization and fuel element fabrication. A study on the material properties of DUPIC fuel and performance analysis method using irradiation of test fuel was also performed. (author). 91 refs., 274 tabs., 254 figs

Perception by French Students of the Gendered Nature of Material Artifacts Studied in Technology Education

Science.gov (United States)

Colette, Andreucci; Marjolaine, Chatoney

2017-01-01

Many studies have shown the importance of the socio-cultural factors that lead girls to desert scientific and technological courses. Over a long period, the contents of the French technology education (TE) college curricula may well have contributed to strengthening the feeling among girls that this discipline was better suited to boys. The choice…

A Study of Future Communications Concepts and Technologies for the National Airspace System - Part IV

Science.gov (United States)

Ponchak, Denise S.; Apaza, Rafael D.; Wichgers, Joel M.; Haynes, Brian; Roy, Aloke

2015-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is investigating current and anticipated wireless communications concepts and technologies that the National Airspace System (NAS) may need in the next 50 years. NASA has awarded three NASA Research Announcements (NAR) studies with the objective to determine the most promising candidate technologies for air-to-air and air-to-ground data exchange and analyze their suitability in a post-NextGen NAS environment. This paper will present the final results describing the communications challenges and opportunities that have been identified as part of the study.

Has Technology Become a Need? A Qualitative Study Exploring Three Generational Cohorts' Perception of Technology in Regards to Maslow's Hierarchy of Needs

Science.gov (United States)

Dunmore, Denisia

2013-01-01

For the first time in the history of America, there are four different generations living, working and learning together in a society that is more technologically advanced than ever before. However, could it be that technology has become a need? The primary purpose of this qualitative case study was to utilize Maslow's hierarchy of needs as the…

Telecommuting Technology Implementations: A Within- And Between-Subjects Longitudinal Field Study

OpenAIRE

Venkatesh, Viswanath; Johnson, Philip

2002-01-01

This research examines the impact of technology design on the acceptance and long-term use of telecommuting systems. Specifically, we compare employee acceptance and sustained use of a traditional system designed based on the common "desktop metaphor," with a virtual-reality system designed to enhance social richness and tele-presence. This 1-year study incorporated a within- and between-subjects examination of 527 employees across 3 locations of a large organization. Results showed much high...

The Application of KINECT Motion Sensing Technology in Game-Oriented Study

OpenAIRE

Hui Yu Yang; Hao Zhang; Wei Xu; Ping Jian Zhang; Liang Ming Xu

2014-01-01

The learning environment based on the KINECT Motion Sensing technology is able to fully mobilize the learners' multi-sensory organs, closely combine study with sports and enhance human-computer interactions, which can be conducive to the learners' health, greatly increase the relishes of learning and promote effective learning in the game, and finally compensate for the shortage of human-computer interactions in the traditional mouse and keyboard mode. The article elaborates on the KINECT Mot...

The History of Technology in Education. A Comparative Study and Forecast

OpenAIRE

del Campo, Jose María; Negro, Vicente; Núñez, Miguel

2012-01-01

Area, launched in 1999 with the Bologna Declaration, has bestowed such a magnitude and unprecedented agility to the transformation process undertaken by European universities. However, the change has been more profound and drastic with regards to the use of new technologies both inside and outside the classroom. This article focuses on the study and analysis of the technology’s history within the university education and its impact on teachers, students and teaching methods. A...

Comparative study of linkage between environmental policy instruments and technological innovation: Case study on end-of-life vehicles technologies in Japan and EU.

Science.gov (United States)

Singh, Rajeev Kumar; Yabar, Helmut; Nozaki, Noriko; Niraula, Baburam; Mizunoya, Takeshi

2017-08-01

A growing population and urbanization is a challenge for finite natural resources. Without strict regulation to recycle, recover and reuse resources, waste is discarded with no value. Every year throughout the world, more than twenty-five million vehicles turn into end-of-life vehicles (ELV) and most of their valuable resources end up in landfill sites. This research analyses the effect of regulation on ELV innovation for additional recovery of resources in Japan and EU nations using patent data as a proxy. The analysis determines the statistical difference in patent activity before and after regulations were enacted in the case studies. The relevant data on ELV technologies was gathered for the period 1985-2013. The study suggests that in general environmental regulation in Japan drove innovation and reveals that environmental policy in Japan was more effective in enabling innovation compared to EU nations. Specifically, the results from these developed countries can be used by the rapidly growing developing countries in automobile manufacturing like China for amendment of their ELV regulation accordingly. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Study on planning of the international collaboration foundation for the Advanced Nuclear Technology Development Project

Energy Technology Data Exchange (ETDEWEB)

Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

2005-03-15

Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U.S. have cooperated in the INERI. This study aimed mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; Investigation and analysis of international and domestic trends related to advanced nuclear technologies, Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities, Support for the activities related to I-NERI between Korea and U.S. and conducting the international cooperation, International cooperation activities for the INPRO. This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Futhermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems.

A Study on planning of the international collaboration foundation for the Advanced Nuclear Technology Development Project

International Nuclear Information System (INIS)

Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

2005-03-01

Korea has participated in the international collaboration programs for the development of future nuclear energy systems driven by the countries holding advanced nuclear technology and Korea and U.S. have cooperated in the INERI. This study aimed mainly at developing the plan for participation in the collaborative development of the Gen IV, searching the participation strategy for INERI and the INPRO, and the international cooperation in these programs. Contents and scope of the study for successful achievement are as follows; Investigation and analysis of international and domestic trends related to advanced nuclear technologies, Development of the plan for collaborative development of the Gen IV and conducting the international cooperation activities, Support for the activities related to I-NERI between Korea and U.S. and conducting the international cooperation, International cooperation activities for the INPRO. This study can be useful for planning the research plan and setting up of the strategy of integrating the results of the international collaboration and the domestic R and D results by combining the Gen IV and the domestic R and D in the field of future nuclear technology. Futhermore, this study can contribute to establishing the effective foundation and broadening the cooperation activities not only with the advanced countries for acquisition of the advanced technologies but also with the developing countries for the export of the domestic nuclear energy systems

Adolescents' Depressive Symptoms and Subsequent Technology-Based Interpersonal Behaviors: A Multi-Wave Study.

Science.gov (United States)

Nesi, Jacqueline; Miller, Adam B; Prinstein, Mitchell J

2017-07-01

This study examined the longitudinal effects of adolescents' depressive symptoms on engagement in technology-based social comparison and feedback seeking (SCFS) behaviors. A total of 816 adolescents (54.7% girls; M age =14.1 at Time 1) participated at three times points, each one year apart. Adolescents reported technology-based SCFS, depressive symptoms, and frequencies of technology use (cell phones, Facebook, and Instagram). Multiple group (by gender) latent growth curve models examined concurrent and lagged effects of depressive symptoms on SCFS, controlling for adolescent's underlying trajectories of SCFS and overall frequencies of technology use. Results indicated that higher levels of depressive symptoms were concurrently associated with greater SCFS after accounting for adolescents' typical patterns of SCFS. For boys only, higher depressive symptoms were prospectively associated with later increases in SCFS. Results highlight the importance of social media as a unique context in which depressed adolescents may be at risk for maladaptive interpersonal behavior.

A path analysis study of retention of healthcare professionals in urban India using health information technology.

Science.gov (United States)

Bhattacharya, Indrajit; Ramachandran, Anandhi

2015-07-31

Healthcare information technology (HIT) applications are being ubiquitously adopted globally and have been indicated to have effects on certain dimensions of recruitment and retention of healthcare professionals. Retention of healthcare professionals is affected by their job satisfaction (JS), commitment to the organization and intention to stay (ITS) that are interlinked with each other and influenced by many factors related to job, personal, organization, etc. The objectives of the current study were to determine if HIT was one among the factors and, if so, propose a probable retention model that incorporates implementation and use of HIT as a strategy. This was a cross-sectional survey study covering 20 hospitals from urban areas of India. The sample (n = 586) consisted of doctors, nurses, paramedics and hospital administrators. Data was collected through a structured questionnaire. Factors affecting job satisfaction were determined. Technology acceptance by the healthcare professionals was also determined. Interactions between the factors were predicted using a path analysis model. The overall satisfaction rate of the respondents was 51 %. Based on factor analysis method, 10 factors were identified for JS and 9 factors for ITS. Availability and use of information technology was one factor that affected JS. The need for implementing technology influenced ITS through work environment and career growth. Also, the study indicated that nearly 70 % of the respondents had awareness of HIT, but only 40 % used them. The importance of providing training for HIT applications was stressed by many respondents. The results are in agreement with literature studies exploring job satisfaction and retention among healthcare professionals. Our study documented a relatively medium level of job satisfaction among the healthcare professionals in the urban area. Information technology was found to be one among the factors that can plausibly influence their job satisfaction and

Searching for a Path: A Bibliometric study on Innovation and Technological Capabilities

Directory of Open Access Journals (Sweden)

João Heitor De Avila Santos

2015-11-01

Full Text Available Innovation is recognize as a matter of survival and success to firms and technological capabilities can lead to an innovative behavior by using technological resources and competences. The literature about technological capability and innovation is vast, counting on several approaches and a large number of researchers involved within. Based on this, our aim is to use a bibliometrics approach to map out the authors, institutions, journals and the evolution of the publication as well, to provide the path needed to build a theoretical framework about the theme. We held this research on the Scopus database using a standard search protocol to perform the selection of the sample. Our results indicates an emerging field of study and a large number papers and citations concentrated in few journals. Most cited authors are related to seminal works on the subject and most cited papers are ones from late 90’s and early 2000. 

Analyzing the Discourse of Chais Conferences for the Study of Innovation and Learning Technologies via a Data-Driven Approach

Directory of Open Access Journals (Sweden)

Vered Silber-Varod

2016-12-01

Full Text Available The current rapid technological changes confront researchers of learning technologies with the challenge of evaluating them, predicting trends, and improving their adoption and diffusion. This study utilizes a data-driven discourse analysis approach, namely culturomics, to investigate changes over time in the research of learning technologies. The patterns and changes were examined on a corpus of articles published over the past decade (2006-2014 in the proceedings of Chais Conference for the Study of Innovation and Learning Technologies – the leading research conference on learning technologies in Israel. The interesting findings of the exhaustive process of analyzing all the words in the corpus were that the most commonly used terms (e.g., pupil, teacher, student and the most commonly used phrases (e.g., face-to-face in the field of learning technologies reflect a pedagogical rather than a technological aspect of learning technologies. The study also demonstrates two cases of change over time in prominent themes, such as “Facebook” and “the National Information and Communication Technology (ICT program”. Methodologically, this research demonstrates the effectiveness of a data-driven approach for identifying discourse trends over time.

A Cross-Cultural Comparative Study of Uses and Perceptions of Technology in Education among Turkish and US Undergraduates

Science.gov (United States)

Tekinarslan, Erkan; Kennedy, Eugene; Nicolle, Pamela S.

2015-01-01

The purpose of this study was to investigate differences and similarities among United States (US) and Turkish university students in technology ownership, uses of technology for academic purposes, perceived importance of technology, and preferences for technology in education. The EDUCAUSE Center for Analytics and Research (ECAR) undergraduate…

A study on the manufacturing and processing technologies of DUPIC fuel

International Nuclear Information System (INIS)

Yang, Myung Seung; Park, J.J.; Lee, J.W.; Kim, S.S.; Yim, S.P.; Kim, J.H.; Kim, K.H.; Na, S.H.; Kim, W.K.; Kang, K.H.; Shin, J.M.; Lee, D.Y.; Cho, K.H.; Lee, Y.S.; Sohn, J.S.; Kim, M.J.

1999-06-01

In this study, DUPIC fuel fabrication technologies are developed, characteristics of fuel materials are studied, and characterization experiments for DUPIC powder and pellets are performed at PIEF. SIMFUEL powder and pellets are made of UO 2 mixed with the simulated fission products of spent fuel. Both characteristics of SIMFUEL powder and micro-structure of pellets are analyzed. End cap of DUPIC fuel rod is sealed with laser welding technique. Optimum welding condition is analyzed with results of Micro-hardness, mechanical and metallographic tests. Micro-focus x-ray inspection technique is studied to fine fine defects. DUPIC processes are improved by making OREOX process be multi-functional and by adopting rol compacting process. At PIEF, characterization experiments for DUPIC powder and pellet are performed. The equipment for experiments have been installed at PIEF no. 9405 hot cell, and its process parameters are established. (author). 7 refs., 7 tabs., 37 figs

Application study of nuclear technologies for dual use

Energy Technology Data Exchange (ETDEWEB)

Shin, Jae Gon; Chung, W. S.; Park, W. S.; Lee, K. W.; Cha, H. K.; Han, M. H.; Yoon, J. S.; Honh, D. H.; Park, J. Y.; Lee, C. H.; Yeo, J. W.; Jung, M.; Ra, G. H

2000-02-01

The projects for the joint development of technology common to the civilian and military sectors are being carried out at national level to maximize the utilization of limited resources. The technologies have been identified through a process which considered whether they are duplicates of the present military technology, whether they are necessary, and whether their realization is feasible. In addition, the problems surfaced during the identification process have been analyzed and suggestions to vitalize the military application of civilian nuclear technology are presented in the contexts of personal channel, institutional networking, R and D information exchange, and budgetary support. (author)

Enabling frameworks for low-carbon technology transfer to small emerging economies: Analysis of ten case studies in Chile

International Nuclear Information System (INIS)

Pueyo, Ana

2013-01-01

Technology transfer is crucial to reduce the carbon intensity of developing countries. Enabling frameworks need to be in place to allow foreign technologies to flow, to be absorbed and to bring about technological change in the recipient country. This paper contributes to identifying these enabling factors by analysing 10 case studies of low-carbon technology transfer processes based in Chile. Our findings show the importance of strong economic and institutional fundamentals, a sound knowledge base, a sizable and stable demand and a functioning local industry. Policy recommendations are derived to improve the penetration of foreign low-carbon technologies in developing countries, focusing on the particularities of small and medium emerging economies. - Highlights: ► We analyse 10 case studies of low carbon technology transfer to Chile. ► We identify enablers of technology transfer to developing countries. ► We provide policy recommendations focusing on small and medium economies.

[Study on extraction and purification technology of Hubei ophiopogon saponins].

Science.gov (United States)

Lin, Yun-Han; Li, Chong-Ming; Li, Xiao-Dong; Xiang, Yang; Zhang, Ya-Qin; Zhang, Xiao-Cun; Liu, Xia

2013-05-01

To explore the extraction and purification technology of total saponins from the effective parts of Liriope spicata. Orthogonal design was used. Macroporous resin was selected to separate and purify total saponin from the effective parts of Liriope spicata. The process validation was conducted. The total saponins was determined by Ultraviolet Spectrophotometry. The optimal extraction conditions were as follows: 10 times the amount of ethanol (70%) for each occasion and hot reflux (3 x 2 h). Total saponins was purified by D101 macroporous resin. The concentration of eluting ethanol was 50% - 70%. Ethanol (70%) was selected as the best eluent. The result of process validation was consistent with the study. The process is simple and stable enough to significantly improve the extraction rate of the effective parts. The study can provide reference for the research and production of effective parts of traditional Chinese medicine such as Liriope spicata.

Developing Public Policies for New Welfare Technologies – A Case Study of Telemedicine and Telehomecare

DEFF Research Database (Denmark)

Tambo, Torben

2012-01-01

and communication-based technologies (ICT) for homecare and monitoring (telemedicine, telehomecare). Despite major investments and national commitment, public policies have not yet found a general approach to move from technological and clinical opportunity and into large-scale regular use of the technology...... (normalisation). This article provides two case studies from Denmark; one case with hypertension monitoring at a local level and another case on national policy implementation through funding of selected demonstration projects. Among the findings are that policy-making processes certainly face major challenges...... in capturing research and development for the transition of technologies into working practice. Furthermore, policy approaches of supporting experimentation and demonstration are found inadequate in promoting technology into a level of normalisation in highly cross-organisational operational environments...

Role of liability preferences in societal technology choices: results of a pilot study

International Nuclear Information System (INIS)

Cantor, R.; Rayner, S.; Braid, B.

1985-01-01

At the 1984 Annual Meeting of the Society for Risk Analysis, Steve Rayner presented a paper that challenged the conventional wisdom of risk management research. In that paper, he argued that resolving the question, ''How safe is safe enough.'' is less important in making societal technology choices than ''How fair is safe enough.'' Adopting the fairness question as the concern of risk management would imply that the process of technology choice explicitly recognize the preferred principles different parties hold with respect to obtaining consent from those affected by the risks, distributing the liabilities, and justifying trust in the relevant institutions. This paper discusses a recent empirical pilot study which explored the fairness hypothesis in the context of nuclear power. Individual interviews and focus groups were conducted to examine whether or not preferred principles for liability distributions were consistent with those suggested by the cultural characteristics of the constituency. The results suggest that for this type of societal technology choice, violation of these preferred principles may be a major source of the conflict between different constituencies. Additionally, the study contributes towards the development of a new approach in risk management that combines the cultural model of risk perceptions with the decision-theoretic approaches found in economics and psychology

A Study on the Evolution of Carbon Capture and Storage Technology Based on Knowledge Mapping

Directory of Open Access Journals (Sweden)

Hong-Hua Qiu

2018-05-01

Full Text Available As a useful technical measure to deal with the problem of carbon dioxide (CO2 emissions, carbon capture and storage (CCS technology has been highly regarded in both theory and practice under the promotion of the Intergovernmental Panel on Climate Change (IPCC. Knowledge mapping is helpful for understanding the evolution in terms of research topics and emerging trends in a specific domain. In this work knowledge mapping of CCS technology was investigated using CiteSpace. Several aspects of the outputs of publications in the CCS research area were analyzed, such as annual trends, countries, and institutions. The research topics in this particular technology area were analyzed based on their co-occurring keyword networks and co-citation literature networks, while, the emerging trends and research frontiers were studied through the analysis of burst keywords and citation bursts. The results indicated that the annual number of publications in the research field of CCS technology increased rapidly after 2005. There are more CCS studies published in countries from Asia, North America, and Europe, especially in the United States and China. The Chinese Academy of Sciences not only has the largest number of publications, but also has a greater impact on the research area of CCS technology, however, there are more productive institutions located in developed countries. In the research area of CCS technology, the main research topics include carbon emissions and environmental protection, research and development activities, and social practical issues, meanwhile, the main emerging trends include emerging techniques and processes, emerging materials, evaluation of technological performance, and socioeconomic analysis.

AN ACTIVITY THEORY APPROACH TO STUDY BARRIERS OF FACULTY REGARDING TECHNOLOGY INTEGRATION IN HIGHER EDUCATION

DEFF Research Database (Denmark)

Castro Guzman, Willy

2016-01-01

technology. Ertmer’s approach establishes first-order and second-orders barriers as hinderers for teacher’s adoption of technology. The study intends to answer what are the barriers existing in the socalled enthusiastic faculty teachers regarding technology integration in Education? Findings call...... dichotomies between enthusiastic-resistant teachers, the intrinsic-extrinsic barriers, and claims for passing from an individual to a collective approach to ICT integration in education......Information and communication technologies are instruments for supporting new ways of teaching and learning. Nevertheless, its impact concerning scope has not reached the expected level. This strain between benefits and impact has been inquired from the perspective of barriers of teachers to use...

Study on manufacturing technology of fuel guide tube using HANA alloys

International Nuclear Information System (INIS)

Kim, Hyungil; Jung, Yangil; Park, Dongjun; Park, Jeongyong; Kim, Ilhyun; Choi, Byungkwon; Jeong, Yonghwan; Park, Sangyoon

2013-04-01

This research was focused on the study for the manufacturing technology of HANA alloys to crease the corrosion resistance of 30% as well as the to improve the strength of 10% when compared to the commercial zirconium alloys. The new manufacturing concept having higher corrosion resistance and strength than commercial alloy performance can be obtained in this research. This result was transferred to the KNF and, that will be commercialized. This research result can be summarized like this; Ο Parameter study to increase formability of HANA alloy tube - Study on alloy element and heat-treatment effect - Study on texture development mechanism - Study on final annealing effect Ο Out-of-pile performance evaluation of HANA alloy tube - Corrosion performance evaluation of HANA alloy manufactured at KNF - Mechanical performance evaluation of HANA alloy manufactured at KNF - Recrystallization behavior evaluation of HANA alloy manufactured at KNF - Texture characterization of HANA alloy manufactured at KNF - Microstructure characterization of HANA alloy manufactured at KNF Ο Manufacturing guideline setup to increase formability of HANA alloy tube - Manufacturing guideline setup to decrease surface defect - Manufacturing guideline setup to increase strength and corrosion resistance - Manufacturing guideline setup to control texture

Autistic Spectrum Disorder and Assistive Technology: Action Research Case Study of Reading Supports

Science.gov (United States)

Lindsey, Pam

2012-01-01

This descriptive action research experience with case study procedures examined the use of best practices paired with assistive technologies as interventions to individualize fiction reading instruction for a high-functioning elementary student, JB (pseudonym), diagnosed with autistic spectrum disorder. JB's instructional, reading goals were to…

The transition from strategic technology alliances to mergers and acquisitions: an exploratory study

NARCIS (Netherlands)

Hagedoorn, J.; Sadowski, B.M.

1999-01-01

This paper studies a number of research topics derived from the basic question: do interfirm alliances change into mergers and acquisitions as companies that were previously co-operating become integrated? The analysis is limited to the group of strategic technology alliances, i.e. those interfirm