WorldWideScience

Sample records for technology standards 2000-essentials

  1. Radiologic Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the radiologic technology program in Georgia. The standards are divided into 12 categories; Foundations (philosophy, purpose, goals, program objectives, availability, evaluation); Admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); Program…

  2. Respiratory Therapy Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the respiratory therapy technology program in Georgia. The standards are divided into 12 categories: Foundations (philosophy, purpose, goals, program objectives, availability, evaluation; Admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning);…

  3. Avionics Maintenance Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the avionics maintenance technology program in Georgia. The standards are divided into the following categories: foundations, diploma/degree (philosophy, purpose, goals, program objectives, availability, evaluation); admissions, diploma/degree (admission requirements, provisional admission…

  4. Fulfilling a Promise: Standards for Technological Literacy.

    Science.gov (United States)

    Bybee, Rodger W.

    2003-01-01

    Discusses the place of standards in U.S. education, the development of the Standards for Technological Literacy, and the recent publication of "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards." (Contains 21 references.) (SK)

  5. Chinese Bedding Technology Standard under Drafting

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    National Home Textile Standardization Technology Committee(NHTSTC)set up its Bedding Branch Committee. This will promote the work of Chinese bedding technology standardization and a symbol that China step up to meet the

  6. Biofuels: policies, standards and technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-09-15

    Skyrocketing prices of crude oil in the middle of the first decade of the 21st century accompanied by rising prices for food focused political and public attention on the role of biofuels. On the one hand, biofuels were considered as a potential automotive fuel with a bright future, on the other hand, biofuels were accused of competing with food production for land. The truth must lie somewhere in-between and is strongly dependent on the individual circumstance in different countries and regions. As food and energy are closely interconnected and often compete with each other for other resources, such as water, the World Energy Council - following numerous requests of its Member Committees - decided to undertake an independent assessment of biofuels policies, technologies and standards.

  7. China's High-technology Standards Development

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    There are several major technology standards, including audio video coding (AVS), automotive electronics, third generation (3G) mobile phones, mobile television, wireless networks and digital terrestrial television broadcasting, that have been released or are currently under development in China. This article offers a detailed analysis of each standard and studies their impact on China's high-technology industry.

  8. Acquiring Evolving Technologies: Web Services Standards

    Science.gov (United States)

    2016-06-30

    2006 Carnegie Mellon University Acquiring Evolving Technologies: Web Services Standards Harry L. Levinson Software Engineering Institute Carnegie...Acquiring Evolving Technologies: Web Services Standards 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...NUMBER OF PAGES 22 19a. NAME OF RESPONSIBLE PERSON a. REPORT unclassified b. ABSTRACT unclassified c. THIS PAGE unclassified Standard Form

  9. LTE-Advanced Relay Technology and Standardization

    CERN Document Server

    Yuan, Yifei

    2013-01-01

    LTE-Advanced Relay Technology and Standardization provides a timely reference work for relay technology with the finalizing of LTE Release 10 specifications. LTE-Advanced is quickly becoming the global standard for 4G cellular communications. The relay technology, as one of the key features in LTE-Advanced, helps not only to improve the system coverage and capacity, but also to save the costs of laying wireline backhaul. As a leading researcher in the field of LTE-Advanced standards, the author provides an in-depth description of LTE-A relay technology, and explains in detail the standard specification and design principles.     Readers from both academic and industrial fields can find sections of interest to them: Sections 2 & 4 could benefit researchers in academia and those who are engaged in exploratory work, while Sections 3 & 4 are more useful to engineers. Dr. Yifei Yuan is the Technical Director at the Standards Department of ZTE Inc.

  10. Vacuum Technology and Standardization-An Update

    Science.gov (United States)

    Akram, H. M.; Rashid, H.

    2011-06-01

    Vacuum technology has been vital for the progress in almost every field of modern industrial & scientific research and technological developments. Research in this field is therefore important for the rapid progress in other sophisticated technologies. The modern society require precise know-how of vacuum metrology for its complex and sophisticated manufacturing processes and research activities. Accuracy in vacuum measurements is therefore an essential need for every application. The required accuracy is achieved with the help of well-calibrated vacuum gauges and this is possible only, if there exist proper vacuum standards of required range and accuracy. In this paper, a brief review of recently developed different vacuum standards, namely Standard Mercury Manometer, Standard Volume Expansion System and Standard Orifice Flow System will be presented, employed for the calibration of low, medium and high vacuum gauges respectively. Our recently developed standards are simple in design, least in vibration & degassing rate with desired accuracy, ease of operation and cost effective.

  11. Relations between the technological standards and technological appropriation

    Directory of Open Access Journals (Sweden)

    Carlos Alberto PRADO GUERRERO

    2010-06-01

    Full Text Available The objective of this study is to analyze the educational practices of using Blackboard in blended learning environments with students of higher education to understand the relationship between technological appropriation and standards of educational technology. To achieve that goal, the following research question was raised: ¿To what extent are the standards of education technology with the appropriation of technology in blended learning environments in higher educa­tion related? The contextual framework of this work includes the following topics: the institution, teaching, teachers and students. The design methodology that was used is of a correlation type. Correlations were carried out to determine the frequency and level in the technological standards as well as the appropriation of technology. In the comparison of the results obtained by the students, the teachers and the platform; we found that students in the school study showed a high degree of technology ownership and this was the same for the performance shown on the technological standards. It was established that teachers play a key role in developing the techno­logical appropriation of students and performance in technology standards.

  12. TESOL Technology Standards: Description, Implementation, Integration

    Science.gov (United States)

    Teachers of English to Speakers of Other Languages, Inc. (TESOL), 2011

    2011-01-01

    The "TESOL Technology Standards" are applicable in a wide range of contexts: foreign language, second language, child, teen, adult, higher education, vocational education, language for specific purposes, and fully online programs; and in settings with low, medium, or high resources and access to communication technologies. Students, teachers,…

  13. Standard cost elements for technology programs

    Science.gov (United States)

    Christensen, Carisa B.; Wagenfuehrer, Carl

    1992-01-01

    The suitable structure for an effective and accurate cost estimate for general purposes is discussed in the context of a NASA technology program. Cost elements are defined for research, management, and facility-construction portions of technology programs. Attention is given to the mechanisms for insuring the viability of spending programs, and the need for program managers is established for effecting timely fund disbursement. Formal, structures, and intuitive techniques are discussed for cost-estimate development, and cost-estimate defensibility can be improved with increased documentation. NASA policies for cash management are examined to demonstrate the importance of the ability to obligate funds and the ability to cost contracted funds. The NASA approach to consistent cost justification is set forth with a list of standard cost-element definitions. The cost elements reflect the three primary concerns of cost estimates: the identification of major assumptions, the specification of secondary analytic assumptions, and the status of program factors.

  14. Standards And Their Impact On Technology

    Science.gov (United States)

    Endelman, Lincoln L.

    1990-01-01

    The needs for standards and the processes to provide them are very complex. Standardization is dependent upon voluntary and nonvoluntary agreement among individuals, companies, various organizations, and countries around the world. The agreements on standards, which sometimes take five to ten years, are hindered by monetary considerations, relinquishment of patent rights, disagreement among nations on dimensions in metric or the English system, and professional jealousy among some individuals. Standards, Standards, Standards - what a boring and uninteresting topic. Why did I ever agree to speak to you about something that most people take for granted and don't even bother to pay much attention to until they encounter a situation where a nonstandard item creates a problem. Have any of you ever bought a roll of 35mm film for your foreign made camera and found out that it needs 32mm film? That could have happened to you in the late nineteenth or early twentieth century. Yes, we know that, you say, but that's not a problem anymore. Well, how about when you try to put a Beta cassette into your VCR that uses VHS cassettes? Have you tried to fit a Minolta lens onto a Nikon camera? But enough, you all have the idea. Standards were developed to make interchangeable components compatible with other equipment, no matter who made it or where it was made. Some companies and countries deliberately made things different to protect their inventions and profit by their uniqueness. More and more attempts are being made to reduce the international differences in technology and establish a common ground for trade and commerce. The European Common Market is in the process of eliminating many of the barriers to free exchange of goods, services, and even moving to a universal currency. This all sounds good for Europe, but what about the USA and the rest of the world. The United States has fought the change to the metric system for almost two hundred years. Our electrical system and the

  15. 75 FR 79354 - Assessment Technology Standards Request for Information (RFI)

    Science.gov (United States)

    2010-12-20

    ..., virtual worlds, mobile devices, and simulations. 3.2.28 Accessibility. How do technology standards ensure... Assessment Technology Standards Request for Information (RFI) AGENCY: Office of Innovation and Improvement, U... pertaining to assessment technology standards. SUMMARY: The purpose of this RFI is to collect...

  16. Web Modules: Integrating Curricula and Technology Standards

    Science.gov (United States)

    Dawson, Carol

    2008-01-01

    The purposes of this article are to provide the sequence of learning events about the integration of curricula and technology using modules prepared by the Southeast Teachers Are Revitalizing Teaching Through Technology (START) Technology Team and to describe the impact these technology modules had on university faculty and candidates at Alabama…

  17. Smart grid standards specifications, requirements, and technologies

    CERN Document Server

    Sato, Takuro; Duan, Bin; Macuha, Martin; Zhou, Zhenyu; Wu, Jun; Tariq, Muhammad; Asfaw, Solomon A

    2015-01-01

    With numerous existing Smart Grid standards, it is clear that governments and industrial organizations world-wide have understood and acknowledged the critical role they play. This timely book is a useful guide for Smart Grid professionals in easily classifying fundamental Smart Grid standards, and to quickly find the building blocks they need to analyse and implement a Smart Grid system. The standards are organized in a systematic manner that aids identification, according to grid requirements. It also covers broader Smart Grid areas including, but not limited to, the following: A fully c

  18. Standardization in technology adoption: A comparison of broadcast TV cases

    OpenAIRE

    Kim, Heejung

    2012-01-01

    Based on developments in the U.S. television, this study illustrates the choice of technical standards by the government. Broadcasting in the U.S. has been largely affected by the adoption of new technology. Technology adoptions have impacted economy, society, industry, and government policies of the U.S. broadcasting. The purpose of this study is to examine standard-setting development and policies for major technology adoptions in broadcasting: color TV adoption and digital TV adoption.

  19. Outdoor Lighting Networks: Market, Technologies and Standards

    NARCIS (Netherlands)

    Cavalcanti, D.; Wang, J.; Chen, R.; Jiang , D.; Yang, Y.

    2012-01-01

    Providing the right amount of light where and when it is needed is an opportunity to transform today’s cities into smart and livable urban spaces. New technologies are being introduced, such are adaptivecontrols and outdoor lighting networks, which can deliver energy andcost savings through adaptive

  20. Implementing the Standards: The Role of Technology in Teaching Mathematics.

    Science.gov (United States)

    Demana, Franklin; Waits, Bert K.

    1990-01-01

    Discussed are assumptions about technology and classroom equipment, teaching methods, getting started, pitfalls, and the role of algebra and calculus. Suggestions are given for implementing the spirit and vision of the standards. (YP)

  1. Dual technology: making incompatible radio interface standards coexist

    Science.gov (United States)

    Fiore, Dennis J.

    1996-01-01

    Existing cellular networks handle voice traffic by using narrowband, single-technology equipment. More recently-developed radio interface standards such as TDMA and CDMA use different technology and equipment and are incompatible with the existing cellular infrastructure. The needs of wireless customers are also changing dramatically. Typical users will soon expect to be able to transmit data as well as voice. In the immediate future, users will demand advanced features such as one phone number, called ID, location ID, all of which require new technology and radio standards. To meet the need for transporting data, cellular network providers are adding equipment to transport data over existing cellular networks via CDPD. With the advent of dual technology, network providers will be able to satisfy customers' needs and increase their revenue--without installing additional data equipment. Dual technology will provide simultaneous support for incompatible standards and also supply a migration path to the advanced features of future digital phones.

  2. Standard Systems Group (SSG) Technology Adoption Planning Workshop

    Science.gov (United States)

    2004-04-01

    Internet Routed Protocol Network (SIPRNET) architecture • Replace the current 5-year old enterprise network backup system • Improve of current IPTV ...Standard Systems Group (SSG) Technology Adoption Planning Workshop Suzanne Garcia Lorraine Nemeth-Adams Jan Vargas April 2004...Standard Systems Group(SSG) Technology Adoption Planning Workshop 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d

  3. Information Technology & Goals of Standards-Based Instruction

    Directory of Open Access Journals (Sweden)

    Douglas A. Archbald

    2001-11-01

    Full Text Available This article examines goals of standards-based reform in education and ways in which developments in information technology have facilitated those goals. Since standards-based reform is a rather general concept, I begin by developing a more specific formulation which I refer to as the “standards-based instruction and assessment” model. Developments in information technology over the last fifteen years have contributed in important ways to the goals of standards-based reform at the policy level, but difficult organizational and technical challenges still have to be overcome to realize more fully the goal of standards-based instruction and assessment in instructional management and practice within schools and classrooms.

  4. The radioactive standard and the development of remote calibration technology

    CERN Document Server

    Sato, Y

    2003-01-01

    The situation of the radioactive standard and traceability are explained. Application of remote calibration technology based on internet technology is ascribed. In order to support the radioactive standard, a group of measurement instruments are working. It consists of 4 pi beta-gamma simultaneous measurement instrument, 4 pi gamma pressurized ionization chamber with standard source, gamma-ray spectrometer, liquid scintillation counter and charge particle measurement instrument. Their features are explained. The traceability system of radioactive standard in Japan is stated. New e-trace project proposed by the National Metrology Institute of Japan is explained. It was proved that the ionization system made possible the radioactive standard by e-trace. (S.Y.)

  5. Patterns in Standards and Technologies for Economic Information Systems Interoperability

    Directory of Open Access Journals (Sweden)

    Vasile Irimia

    2012-06-01

    Full Text Available This paper presets results from a review of the current standards used for collaboration between economic information systems, including web services and service oriented architecture, EDI, ebXML framework, RosettaNet framework, cXML, xCBL UBL, BPMN, BPEL, WS-CDL, ASN.1, and others. Standards have a key role in promoting economic information system interoperability, and thus enable collaboration. Analyzing the current standards, technologies and applications used for economic information systems interoperability has revealed a common pattern that runs through all of them. From this pattern we construct a basic model of interoperability around which we relate and judge all standards, technologies and applications for economic information systems interoperability.

  6. Temperature measurements at the National Institute of Standards and Technology

    Science.gov (United States)

    Mangum, B. W.

    The high-precision and high-accuracy measurements involved in the calibrations of various types of thermometers at the National Institute of Standards and Technology (NIST) are described. The responsibilities of the NIST Thermometry Group include not only calibration of the standard instruments of the scales but also the calibration of base-metal and noble-metal thermocouples, industrial platinum resistance thermometers, liquid in-glass thermometers, thermistor thermometers, and digital thermometers. General laboratory thermometer calibrations are described. Also, a Measurement Assurance Program is described which provides a direct assessment of a customer's technological competence in thermometry.

  7. Standardized UXO Technology Demonstration Site, Scoring Record No. 943

    Science.gov (United States)

    2014-08-01

    TEST AND EVALUATION COMMAND ABERDEEN PROVING GROUND, MD 21005-5001 DISTRIBUTION UNLIMITED, AUGUST 2014. STANDARDIZED UXO TECHNOLOGY...DEMONSTRATION SITE SCORING RECORD NO. 943 SITE LOCATION: ABERDEEN PROVING GROUND DEMONSTRATOR: BATTELLE 100A DONNER DRIVE OAK RIDGE, TN 37830...TECHNOLOGY TYPE/PLATFORM: TEM-8G TOWED ARRAY AREAS COVERED: SMALL MUNITIONS TEST SITE PREPARED BY: U.S. ARMY ABERDEEN TEST CENTER ABERDEEN

  8. [Standards in information technology-assisted tumor documentation].

    Science.gov (United States)

    Altmann, U; Wächter, W; Dudeck, J

    2000-01-01

    Data standards are a irrevocable pre-condition for a variety of applications in information technology, e.g. documentation, communication, and analysis. For this purpose, contents as well as rules for the representation of contents have to be defined. Tumour documentation has a long standing tradition. This contribution shows, which standards exist, how they are related to each other, what they are used for, and which tools exist.

  9. Standards, building codes, and certification programs for solar technology applicatons

    Energy Technology Data Exchange (ETDEWEB)

    Riley, J. D.; Odland, R.; Barker, H.

    1979-07-01

    This report is a primer on solar standards development. It explains the development of standards, building code provisions, and certification programs and their relationship to the emerging solar technologies. These areas are important in the commercialization of solar technology because they lead to the attainment of two goals: the development of an industry infrastructure and consumer confidence. Standards activities in the four phases of the commercialization process (applied research, development, introduction, and diffusion) are discussed in relation to institutional issues. Federal policies have been in operation for a number of years to accelerate the development process for solar technology. These policies are discussed in light of the Office of Management and Budget (OMB) Circular on federal interaction with the voluntary consensus system, and in light of current activities of DOE, HUD, and other interested federal agencies. The appendices cover areas of specific interest to different audiences: activities on the state and local level; and standards, building codes, and certification programs for specific technologies. In addition, a contract for the development of a model solar document let by DOE to a model consortium is excerpted in the Appendix.

  10. 75 FR 8099 - Public Workshop on Marine Technology and Standards

    Science.gov (United States)

    2010-02-23

    ... Composite Pressure Vessels Coating Selection Risk/Hazard Mitigation Transporting CNG as Cargo Shipboard Fire..., electrical & mechanical systems, lifesaving and fire safety equipment, and related equipment approval and..., including: Green Ship Technology Hydrogen Fuel Cell Propulsion Standards for H 2 Storage and...

  11. 77 FR 55482 - Public Workshop on Marine Technology and Standards

    Science.gov (United States)

    2012-09-10

    ... Arlington, VA. This public workshop will provide a unique opportunity for classification societies, industry... technological impacts on the marine industry, corresponding coverage in related codes and standards, and... register for the workshop. ADDRESSES: The workshop will be held at The Double Tree by Hilton Hotel, in...

  12. WIAMan Technology Demonstrator Sensor Codes Conforming to International Organization for Standardization/Technical Standard (ISO/TS) 13499

    Science.gov (United States)

    2016-03-01

    Standardization/Technical Standard ( ISO /TS) 13499 by Michael Tegtmeyer Approved for public release; distribution is unlimited. NOTICES Disclaimers The findings...International Organization for Standardization/Technical Standard ( ISO /TS) 13499 by Michael TegtmeyerWIAMan Engineering Office, ARL Approved for public...WIAMan Technology Demonstrator Sensor Codes Conforming to International Organization for Standardization/Technical Standard ( ISO /TS) 13499 Michael

  13. Machine-to-machine communications architectures, technology, standards, and applications

    CERN Document Server

    Misic, Vojislav B

    2014-01-01

    With the number of machine-to-machine (M2M)-enabled devices projected to reach 20 to 50 billion by 2020, there is a critical need to understand the demands imposed by such systems. Machine-to-Machine Communications: Architectures, Technology, Standards, and Applications offers rigorous treatment of the many facets of M2M communication, including its integration with current technology.Presenting the work of a different group of international experts in each chapter, the book begins by supplying an overview of M2M technology. It considers proposed standards, cutting-edge applications, architectures, and traffic modeling and includes case studies that highlight the differences between traditional and M2M communications technology.Details a practical scheme for the forward error correction code designInvestigates the effectiveness of the IEEE 802.15.4 low data rate wireless personal area network standard for use in M2M communicationsIdentifies algorithms that will ensure functionality, performance, reliability, ...

  14. Key Technologies in Mobile Visual Search and MPEG Standardization Activities

    Institute of Scientific and Technical Information of China (English)

    Ling- Yu Duan; Jie Chen; Chunyu Wang; Rongrong Ji; Tiejun Huang; Wen Gao

    2012-01-01

    Visual search has been a long-standing problem in applications such as location recognition and product search. Much research has been done on image representation, matching, indexing, and retrieval. Key component technologies for visual search have been developed, and numerous real-world applications are emerging. To ensure application interoperability, the Moving Picture Experts Group (MPEG) has begun standardizing visuaJ search technologies and is developing the compact descriptors for visua) search (CDVS) standard. MPEG seeks to develop a collaborative platform for evaluating existing visual search technologies. Peking University has participated in this standardization since the 94th MPEG meeting, and significant progress has been made with the various proposals. A test model (TM) has been selected to determine the basic pipeline and key components of visual search. However, the first-version TM has high computational complexity and imperfect retrieval and matching. Core experiments have therefore been set up to improve TM. In this article, we summarize key technologies for visual search and report the progress of MPEG CDVS. We discuss Peking University' s efforts in CDVS and also discuss unresolved issues.

  15. Open Standards and Technologies in the S2S Framework

    Science.gov (United States)

    Maffei, A. R.; Rozell, E. A.; West, P.; Zednik, S.; Fox, P. A.

    2011-12-01

    The S2S Search Interface Framework provides tools and services to build customized user interfaces. It also serves as a focal point for repository managers to develop science data services and reusable components for search interfaces. The framework has been used to design a faceted browsing platform for web services, including OpenSearch and SAWSDL. This exemplar faceted browsing platform has been applied in our development of search interfaces for 1) an international open government dataset catalog and 2) a metadata catalog for biological and chemical oceanography. S2S was designed from the ground up using open standards and technologies. The framework was initially created to develop "data dashboard" interfaces on top of OpenSearch services, but has been generalized to support web services and standards with semantic annotation capabilities. We apply OWL, a W3C standard for ontologies on the Web, to create a vocabulary for the description of framework metadata. Our faceted browsing platform is heavily focused on the use of jQuery; we have created reusable user interface "widgets" that leverage OpenLayers and MapServer technology in geospatial selection and visualization, which can be used in this and future platforms. The use of open standards and technologies has enabled rapid iterations over software development lifecycles, and has kept the framework agile as new use cases and ideas have emerged.

  16. Spatial Information Processing: Standards-Based Open Source Visualization Technology

    Science.gov (United States)

    Hogan, P.

    2009-12-01

    . Spatial information intelligence is a global issue that will increasingly affect our ability to survive as a species. Collectively we must better appreciate the complex relationships that make life on Earth possible. Providing spatial information in its native context can accelerate our ability to process that information. To maximize this ability to process information, three basic elements are required: data delivery (server technology), data access (client technology), and data processing (information intelligence). NASA World Wind provides open source client and server technologies based on open standards. The possibilities for data processing and data sharing are enhanced by this inclusive infrastructure for geographic information. It is interesting that this open source and open standards approach, unfettered by proprietary constraints, simultaneously provides for entirely proprietary use of this same technology. 1. WHY WORLD WIND? NASA World Wind began as a single program with specific functionality, to deliver NASA content. But as the possibilities for virtual globe technology became more apparent, we found that while enabling a new class of information technology, we were also getting in the way. Researchers, developers and even users expressed their desire for World Wind functionality in ways that would service their specific needs. They want it in their web pages. They want to add their own features. They want to manage their own data. They told us that only with this kind of flexibility, could their objectives and the potential for this technology be truly realized. World Wind client technology is a set of development tools, a software development kit (SDK) that allows a software engineer to create applications requiring geographic visualization technology. 2. MODULAR COMPONENTRY Accelerated evolution of a technology requires that the essential elements of that technology be modular components such that each can advance independent of the other

  17. Standardized UXO Technology Demonstration Site Scoring Record No. 946

    Science.gov (United States)

    2017-07-01

    SHEPPARD.TRACY.V.1200534219 DN: c=US, o=U.S. Government , ou=DoD, ou=PKI, ou=USA, cn=SHEPPARD.TRACY.V.1200534219 Date: 2017.08.02 12:35:39 -04󈧄...Program, Standardized UXO Technology Demonstration Site, small munitions test site, blind grid, open field, indirect fire, towed array...4 2.1.3 Data Processing Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.4 Data Submission

  18. 76 FR 3877 - Effectiveness of Federal Agency Participation in Standardization in Select Technology Sectors for...

    Science.gov (United States)

    2011-01-21

    ... Standardization in Select Technology Sectors for National Science and Technology Council's Sub-Committee on Standardization; Extension of Comment Period AGENCY: National Institute of Standards and Technology, U.S..._RFI@nist.gov with the subject line ``Standardization feedback for Sub-Committee on Standards.''...

  19. Standardization of green building technologies for environment design

    Directory of Open Access Journals (Sweden)

    Benuzh Andrey

    2016-01-01

    Full Text Available The article describes the structure and field of standardization ISO / TC 205 “Building environment design”, provides examples of green building technologies. The main purpose of the article is to show the interaction between international ISO / TC 205 “Building environment design” and created in Russia in 2016 the Technical Committee of Standardization № 366 “Green technology of the build environment and green innovative products”. Both of these technical committees promote green building technologies for environment design, thereby deal with the negative impact on the environment and the reasons of global warming. Instead of buildings that attempt to suppress and overcome nature, why not design buildings that integrate with the environment, on every possible level? The international standardization work which ISO/TC 205 “Building environment design” performs seeks, in addition to lowering trade barriers for engineering design, to promote and facilitate the design of high performance buildings: higher performing as economic assets for their owners, higher performing as buildings that provide amenable indoor environment for their occupants, and higher performing with respect to resource utilization and environmental impact.

  20. Towards the Gigantic: Entification and Standardization as Technologies of Control

    Directory of Open Access Journals (Sweden)

    Petter G. Almklov

    2012-12-01

    Full Text Available This paper is based on studies of how standardized entities work as elements in a regime to control risk and hazardous work. Drawing on empirical examples from the petroleum industry and infrastructure sectors, we illustrate not only the mech-anisms by which particular modes of entification are involved in regimes of con-trol but also their shortcomings and seductive powers as representations. We show how the world is semantically captured and organized to consist of controllable standardized entities by the organizational regimes in the industries we have stud-ied. This mode of entification is particularly effective in providing transcontextual mobility, as the registered entities can enter the ever-expanding information infra-structures of modernity. Although information infrastructures comprise the stand-ards regulating communication, they commonly materialize in information and communication technologies (ICT that provide an increasing number of effective and ubiquitous pathways through which standardized semantic signs can move and have effects. This is a core concern in the increasing focus on management by detailed regimes of accountability, measurement and standardization seen in most modern organizations. These developments, combined with the representational shortcomings of the standardized entifications, lead to a movement towards the gigantic. An ever-increasing number of signs with increasingly higher granularity are produced in order to control an ever-elusive non-entified world.

  1. Remote laboratories: new technology and standard based architecture

    CERN Document Server

    Benmohamed, Hcene; Prévot, Patrick

    2004-01-01

    E-Laboratories are important components of e- learning environments, especially in scientific and technical disciplines. First widespread E-Labs consisted in proposing simulations of real systems (virtual labs), as building remote labs (remote control of real systems) was difficult by lack of industrial standards and common protocols. Nowadays, robotics and automation technologies make easier the interfacing of systems with computers. In this frame, many researchers (such as those mentioned in [1]) focus on how to set up such a remote control. But, only a few of them deal with the educational point of view of the problem. This paper outlines our current research and reflection about remote laboratory modelling.

  2. Standardized UXO Technology Demonstration Site Scoring Record Number 930b

    Science.gov (United States)

    2010-11-01

    01-07-2010 4. TITLE AND SUBTITLE Standardized USO Technology Demonstration Site Scoring Record No. 930b 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...orthogonal transmitters and ten pairs of differenced receivers. Each vertical face of the cube has three induction coils, and two horizontal faces have...critically damped 5-inch coils with a self-resonant frequency of 75 kHz. The data acquisition board has 12 high-speed ADC channels for output. Ten of

  3. The Economics of Standards and Standardization in Information and Communication Technologies

    DEFF Research Database (Denmark)

    Pedersen, Mogens Kuhn; Fomin, Vladislav V.

    2006-01-01

    Standards have proven themselves indispensable to the industrial revolution. How are standards developed today? What does the economics of standards tell about the impact of standards upon economic growth and productivity? Do standards influence industry innovation? How are the standardization...

  4. Standardized cell samples for midIR technology development

    Science.gov (United States)

    Kastl, Lena; Rommel, Christina E.; Kemper, Björn; Schnekenburger, Jürgen

    2015-03-01

    The application of midIR spectroscopy towards human cell and tissue samples is impaired by the need for technical solutions and lacking sample standards for technology development. We here present the standardization of stable test samples for the continuous development and testing of novel optical system components. We have selected cell lines representing the major cellular skin constituents keratinocytes and fibroblasts (NIH-3T3, HaCaT). In addition, two skin cancer cell types (A-375 and SK-MEL-28 cells) were analyzed. Cells were seeded on CaF2 substrates and measured dried and under aqueous medium as well as fixated and unfixated. Several independent cell preparations were analyzed with an FTIR spectrometer in the wave number range from 1000 - 4000 cm-1. The obtained data demonstrate that fixed and dehydrated cells on CaF2 can be stored in pure ethanol for several weeks without significant losses in quality of the spectral properties. The established protocol of cell seeding on CaF2 substrates, chemical fixation, dehydration, storage under ethanol and air-drying is suitable for the production of reliable midIR standards. The retrieved spectra demonstrate that fixed cells on CaF2 can be prepared reproducibly; with stable midIR spectral properties over several weeks and properties mimicking reliable unfixed cells. Moreover, the fixated samples on CaF2 show clear differences in the cell type specific spectra that can be identified by principle component analysis. In summary, the standardized cell culture samples on CaF2 substrates are suitable for the development of a midIR device and the optimization of the specific midIR spectra.

  5. Low power RF circuit design in standard CMOS technology

    CERN Document Server

    Alvarado, Unai; Adín, Iñigo

    2012-01-01

    Low Power Consumption is one of the critical issues in the performance of small battery-powered handheld devices. Mobile terminals feature an ever increasing number of wireless communication alternatives including GPS, Bluetooth, GSM, 3G, WiFi or DVB-H. Considering that the total power available for each terminal is limited by the relatively slow increase in battery performance expected in the near future, the need for efficient circuits is now critical. This book presents the basic techniques available to design low power RF CMOS analogue circuits. It gives circuit designers a complete guide of alternatives to optimize power consumption and explains the application of these rules in the most common RF building blocks: LNA, mixers and PLLs. It is set out using practical examples and offers a unique perspective as it targets designers working within the standard CMOS process and all the limitations inherent in these technologies.

  6. 78 FR 76627 - Health Information Technology Standards Committee Advisory Meeting: Notice of Meeting

    Science.gov (United States)

    2013-12-18

    ... HUMAN SERVICES Health Information Technology Standards Committee Advisory Meeting: Notice of Meeting AGENCY: Office of the National Coordinator for Health Information Technology, HHS. ACTION: Notice of... National Coordinator for Health Information Technology (ONC). These meeting will be open to the...

  7. MAPPING INFORMATION TECHNOLOGY INFRASTRUCTURE LIBRARY WITH OTHER INFORMATION TECHNOLOGY STANDARDS AND BEST PRACTICES

    Directory of Open Access Journals (Sweden)

    Syed Mubashir Ali

    2013-01-01

    Full Text Available Information Technology (IT has become an important strategic resource that any organization has to manage. It has been recognized that IT services are crucial and strategic organizational assets, therefore, organizations are investing considerable amount of resources into the support and delivery of IT services and the systems that underpins them. Various IT standards and IT best practices are being implemented by the enterprises to support their business and IT services. A number of these standards are different from others but they contain some similarities. This study discusses these IT standards and best practices and maps their processes to ITIL. CobiT, ISO/IEC 27002-2005, Six Sigma, TOGAF, eTOM, CMMI, PCI DSS and Common Security Framework (CSF processes will be mapped to ITIL processes. This study will show the similarities between several IT standards and ITIL that helps in adopting these standards concurrently with ITIL. ITIL and other standards have many similarities that will benefit enterprises in implementing these standards concurrently.

  8. Keeping up with Our Students: The Evolution of Technology and Standards in Art Education

    Science.gov (United States)

    Patton, Ryan M.; Buffington, Melanie L.

    2016-01-01

    This article addresses the standards of technology in the visual arts, arguing the standards function as de facto policy, the guidelines that shape what teachers teach. In this study, we investigate how art education standards approach technology as a teaching tool and artmaking medium, analyzing the current National Visual Arts Standards, the…

  9. The Economics of Standards and Standardization in Information and Communication Technologies

    DEFF Research Database (Denmark)

    Pedersen, Mogens Kuhn; Fomin, Vladislav V.

    2006-01-01

    Standards have proven themselves indispensable to the industrial revolution. How are standards developed today? What does the economics of standards tell about the impact of standards upon economic growth and productivity? Do standards influence industry innovation? How are the standardization pr...

  10. Standardized Testing Program for Solid-State Hydrogen Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Michael A. [Southwest Research Institute; Page, Richard A. [Southwest Research Institute

    2012-07-30

    In the US and abroad, major research and development initiatives toward establishing a hydrogen-based transportation infrastructure have been undertaken, encompassing key technological challenges in hydrogen production and delivery, fuel cells, and hydrogen storage. However, the principal obstacle to the implementation of a safe, low-pressure hydrogen fueling system for fuel-cell powered vehicles remains storage under conditions of near-ambient temperature and moderate pressure. The choices for viable hydrogen storage systems at the present time are limited to compressed gas storage tanks, cryogenic liquid hydrogen storage tanks, chemical hydrogen storage, and hydrogen absorbed or adsorbed in a solid-state material (a.k.a. solid-state storage). Solid-state hydrogen storage may offer overriding benefits in terms of storage capacity, kinetics and, most importantly, safety.The fervor among the research community to develop novel storage materials had, in many instances, the unfortunate consequence of making erroneous, if not wild, claims on the reported storage capacities achievable in such materials, to the extent that the potential viability of emerging materials was difficult to assess. This problem led to a widespread need to establish a capability to accurately and independently assess the storage behavior of a wide array of different classes of solid-state storage materials, employing qualified methods, thus allowing development efforts to focus on those materials that showed the most promise. However, standard guidelines, dedicated facilities, or certification programs specifically aimed at testing and assessing the performance, safety, and life cycle of these emergent materials had not been established. To address the stated need, the Testing Laboratory for Solid-State Hydrogen Storage Technologies was commissioned as a national-level focal point for evaluating new materials emerging from the designated Materials Centers of Excellence (MCoE) according to

  11. Economy and Technology of China Analysis and Evaluation of the Industrial Technological Standards of China (Selected Pages).

    Science.gov (United States)

    1980-07-18

    viewpoint of the technological gap between China and advanced nations (Japan, the USA and Europe). China is trying to fill the gap by "self-reliance"t...development is considered to be much greater than that of Japanese government. Thirdly, the technological gap could be defined in terms of technological...payment of relative values. Taking the three forms of technological gap mentioned above, industripl technological standards of China will be anslyzed and

  12. 45 CFR 170.210 - Standards for health information technology to protect electronic health information created...

    Science.gov (United States)

    2010-10-01

    ... information—(1) General. Any encryption algorithm identified by the National Institute of Standards and Technology (NIST) as an approved security function in Annex A of the Federal Information Processing Standards... 45 Public Welfare 1 2010-10-01 2010-10-01 false Standards for health information technology...

  13. Adoption subsidy versus technology standards under asymmetric information

    NARCIS (Netherlands)

    I.V. Ossokina (Ioulia); O.H. Swank (Otto)

    2008-01-01

    textabstractMarket-based instruments are believed to create more efficient incentives for firms to adopt new technologies than command-and-control policies. We compare the effects of a direct technology regulation and of an adoption subsidy under asymmetric information about the costs of technologic

  14. Modern standardization case studies at the crossroads of technology, economics, and politics

    CERN Document Server

    Schneiderman, R

    2015-01-01

    Modern Standardization -- Case Studies at the Crossroads of Technology, Economics, and Politics covers the development of new technical standards, how these standards are typically triggered, and how they are submitted to standards development organizations (SDOs) for review and evaluation. It fills the gap in the shortage of reference material in the development of real-world standards. The increasing pace of innovation in technology has accelerated the competitive nature of standardization, particularly in emerging markets. Modern Standardization addresses these and other issues through a series of case studies in a format designed for academics and their engineering, business, and law school students.

  15. Open standard building in South Africa: new concepts, strategies and technologies

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2008-03-01

    Full Text Available ” of the structures prohibited adaptation over time. This paper constructs a framework for developing, validating, and applying Open Standard Building in South Africa. The paper finds that Open Standard Building concepts, strategies and technologies can deliver...

  16. Trends for International Standards of the High Speed Powerline Communication Technologies

    Science.gov (United States)

    Aramaki, Michimasa; Koga, Hisao; Atsuta, Akira

    The high speed powerline communication (PLC) technology is useful for a variety of applications especially for Smart Grid. Although the standardization of this technology has been desired for a long time, recently IEEE P1901 and ITU-T SG15 made significant progress and both of the Standards are expected to be completed by the end of 2010. The frame work of the coexistence mechanism among the different types of PLC technologies is also going to be resolved with the collaborative work between IEEE and ITU-T. In this paper, the authors introduce the summary of the International Standardizations of this technology, and also the future prospects of the Standards.

  17. Supporting Best Practices and Standards for Information Technology Infrastructure Library

    Directory of Open Access Journals (Sweden)

    Mihyar Hesson

    2012-01-01

    Full Text Available Problem statement: There are several IT best practices and IT standards, which are independently supporting enterprises. Some of them have similarities and other differ from each other. This study discusses these best practices and standards in contrast with ITIL. Approach: CMMI, CobiT, eTOM, ISO 9000, ISO/IEC 17799, Malcolm Baldrige and Six Sigma will be introduces along with ITIL. Results: This study will prove that all these IT based practices and IT standards are useful and helpful when concurrently adopted with ITIL. Conclusion: By adopting the best IT practices and IT standards ITIL will be benefited in IT Service Support and IT Service Delivery areas.

  18. DOD Information Technology Standard Guidance (ITSG) Version 3.1

    Science.gov (United States)

    1997-04-07

    data and metadata and can be applied to them. d. NIST FIPS 183: IDEFO e. NIST FIPS 184: IDEFIX f. Data element standards in the datz dictionary BSA...183: IDEFO e. NIST FIPS 184: IDEFIX f. Data element standards in the data dictionary BSA, above. 3.9.3.3.6 Recommendations. IRDS, FIPS 156, is

  19. 21 CFR 1311.05 - Standards for technologies for electronic transmission of orders.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Standards for technologies for electronic... JUSTICE REQUIREMENTS FOR ELECTRONIC ORDERS AND PRESCRIPTIONS (Eff. 6-1-10) General § 1311.05 Standards for technologies for electronic transmission of orders. (a) A registrant or a person with power of attorney to...

  20. Standardization as Emerging Content in Technology Education at All Levels of Education

    Science.gov (United States)

    Choi, Dong Geun; de Vries, Henk J.

    2011-01-01

    Integration of standardization into different levels of technology education has surfaced as a critical issue for educational practitioners and policy makers at national and regional (APEC, EU) level. In this paper, we describe and analyze empirical data collected from 118 educational experiences and practices about technology standards and…

  1. Industrial diffusion models and technological standardization; Patrones industriales de diversificacion y estandarizacion tecnologica

    Energy Technology Data Exchange (ETDEWEB)

    Carrillo-Hermosilla, J.

    2007-07-01

    Conventional models of technology diffusion have typically focused on the question of the rate of diffusion at which one new technology is fully adopted. The model described here provides a broader approach, from the perspective the extension of the diffusion of multiple technologies, and the related phenomenon of standardization. Moreover, most conventional research has characterized the diffusion process in terms of technology attributes or adopting firms attributes. Alternatively, we propose here a wide-ranging and consistent taxonomy of the relationships between the circumstances of an industry and the attributes of the technology standardization processes taking place within it. (Author) 100 refs.

  2. Activities of NIST (National Inst. of Standards and Technology)

    Science.gov (United States)

    1992-01-01

    The Radiometric Physics Division of the NIST is responsible for the national standards in radiation thermometry, spectroradiometry, photometry, and spectrophotometry; dissemination of these standards by providing measurement services to customers requiring calibrations of the highest accuracy; and conducting fundamental and applied research to develop the scientific basis for future measurement services. Its relevance to EOS/TIR calibration includes calibrating unknown blackbody for radiance using a well-characterized NIST blackbody source by matching the radiant fluxes with an IR radiometer. The TIR Round Robin is used to verify the calibration of the sources that are used for the absolute radiometric calibration of the individual EOS sensors.

  3. Technology standards and increasing returns: Microsoft versus nokia and linux

    NARCIS (Netherlands)

    Millar, C.C.J.M.; Millar, P.H.; Choi, C.J.

    2010-01-01

    The purpose of this article is to advance theory on the concept of increasing returns by reviewing different strands of literature (Arthur, 1994; Liebowitz and Margolis, 1990; 1994; David, 1990) and to develop the concept of a 'critical mass' strategy which incorporates both technological effects an

  4. Filling the Gap with Technology Innovations: Standards, Curriculum, Collaboration, Success!

    Science.gov (United States)

    Williams, Mia Kim; Foulger, Teresa S.

    2007-01-01

    Filling the Gap with Innovations is a study of a higher education professional development model used to infuse a teacher education program with technology innovations in order to address curriculum gaps. Professional educators at the university level are not traditionally collaborative. Yet, when an assessment of program alignment to state…

  5. Cosmetology Studies. Guide to Standards and Implementation. Career & Technology Studies.

    Science.gov (United States)

    Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

    This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in cosmetology, use technology in the cosmetology field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs in the field. The first section provides a program rationale and…

  6. Technology Demonstration of General Black box Standard for Automobiles (GBSA

    Directory of Open Access Journals (Sweden)

    Kishor R

    2014-05-01

    Full Text Available GBSA is an upcoming proposal towards Automobile industry and to the federal governing bodies around the world. Here we are intent to create a disciplinary system to save city sons from accident death and to abolish insurance piracy. The proposal is actually developed from the loss of mankind in society but pulled by technology and humanity facts..

  7. Technology standards and increasing returns: Microsoft versus Nokia and Linux

    NARCIS (Netherlands)

    Millar-Schijf, Carla C.J.M.; Millar, P.H.; Choi, C.J.

    2010-01-01

    The purpose of this article is to advance theory on the concept of increasing returns by reviewing different strands of literature (Arthur, 1994; Liebowitz and Margolis, 1990; 1994; David, 1990) and to develop the concept of a 'critical mass' strategy which incorporates both technological effects

  8. 78 FR 23574 - Public Workshop on Marine Technology and Standards

    Science.gov (United States)

    2013-04-19

    .... The workshop will provide a unique opportunity for classification societies, industry groups... on the marine industry, corresponding coverage in related codes and standards, and government... workshop will be held at The Double Tree by Hilton Hotel, in the Crystal City neighborhood of Arlington...

  9. Acceptance Factors Influencing Adoption of National Institute of Standards and Technology Information Security Standards: A Quantitative Study

    Science.gov (United States)

    Kiriakou, Charles M.

    2012-01-01

    Adoption of a comprehensive information security governance model and security controls is the best option organizations may have to protect their information assets and comply with regulatory requirements. Understanding acceptance factors of the National Institute of Standards and Technology (NIST) Risk Management Framework (RMF) comprehensive…

  10. Acceptance Factors Influencing Adoption of National Institute of Standards and Technology Information Security Standards: A Quantitative Study

    Science.gov (United States)

    Kiriakou, Charles M.

    2012-01-01

    Adoption of a comprehensive information security governance model and security controls is the best option organizations may have to protect their information assets and comply with regulatory requirements. Understanding acceptance factors of the National Institute of Standards and Technology (NIST) Risk Management Framework (RMF) comprehensive…

  11. Medical Device Plug-and-Play Interoperability Standards & Technology Leadership

    Science.gov (United States)

    2011-10-01

    DoD SBIR projects to develop a first-responder ICE Supervisor. TATRC BAA support has been instrumental in providing “program glue” to effectively...FDA has specifically asked AAMI (Association for the Advancement of Medical Instrumentation ) to pursue the development of interoperability...advances in mind. We also recognize that, as in all technological advances, interoperability poses safety and medico -legal challenges as well. The

  12. Standards for health information technology to ensure adolescent privacy.

    Science.gov (United States)

    Blythe, Margaret J; Del Beccaro, Mark A

    2012-11-01

    Privacy and security of health information is a basic expectation of patients. Despite the existence of federal and state laws safeguarding the privacy of health information, health information systems currently lack the capability to allow for protection of this information for minors. This policy statement reviews the challenges to privacy for adolescents posed by commercial health information technology systems and recommends basic principles for ideal electronic health record systems. This policy statement has been endorsed by the Society for Adolescent Health and Medicine.

  13. Standardized and Repeatable Technology Evaluation for Cybersecurity Acquisition

    Science.gov (United States)

    2017-02-01

    the Computer Network Defense- Cyber Security Division (Code 58200), SSC Pacific, San Diego, CA. The SSC Pacific Naval Innovative Science and...adopted requirements. Once a cyber solution is identified as needed by information security personnel (even if funding is available) the procurement...incorporating new technology to address new cyber threats . While contracts are being worked out, the organization is effectively limited in its capability to

  14. Standardized UXO Technology Demonstration Site, Scoring Record No. 942

    Science.gov (United States)

    2014-09-01

    DEMONSTRATION SITE SCORING RECORD NO. 942 SITE LOCATION: ABERDEEN PROVING GROUND DEMONSTRATOR: BATTELLE 100A DONNER DRIVE OAK RIDGE, TN 37830...TECHNOLOGY TYPE/PLATFORM: TEM-8G TOWED ARRAY AREAS COVERED: BLIND GRID PREPARED BY: U.S. ARMY ABERDEEN TEST CENTER ABERDEEN PROVING GROUND...MD 21005-5059 SEPTEMBER 2014 Prepared for: SERDP/ESTCP MUNITIONS MANAGEMENT ARLINGTON, VA 22203 U.S. ARMY TEST AND

  15. The Mobile Commerce technologies: Generations, Standards and Protocols

    OpenAIRE

    Tiwari, Rajnish; Buse, Stephan; Herstatt, Cornelius

    2006-01-01

    Mobile Commerce has staged a remarkable come-back. Driven by the technological innovations in the field of telecommunications, it is showing signs of a healthy recovery. The collapse of the dot-com boom in 2001/2002 had dealt a severe blow not only to Electronic Commerce but also to Mobile Commerce, which was just about developing at that time. In addition to a general lack of customer demand for mobile, location-based, services, it suffered heavily under the technical deficiencies of end-dev...

  16. Discussion about the standard system on urban domestic water saving technology in China

    Institute of Scientific and Technical Information of China (English)

    YANG Shujun; REN Xiaoli; GAO Benhu

    2007-01-01

    Standard is the technical foundation of national economic and social development, and it is the basic rule of establishing social regulation.Researching and constituting the standard system of urban domestic water saving technology is to offer important science basis for revising standard plan and standardize research plan. This paper introduces the present situation of our urban domestic water saving technical standard system, problem and the development direction in the future, as well as project planning of constructing urban domestic water saving technical standard system.

  17. Technological characteristics of digital video broadcasting: Handheld standard DVB-H

    Directory of Open Access Journals (Sweden)

    Andreja B. Samčović

    2011-07-01

    Full Text Available This paper gives an overview of the Digital Video Broadcasting - Handheld standard DVB-H, as a part of the DVB Project. This standard is based on the previous standard DVB-T, which was developed for the terrestrial digital television. The ways of DVB-H signal transmission are also described. Development of advanced technology enabled the digital video broadcasting over wireless portable terminals. This paper discusses the key technological features of the DVB-H standard, such as: time slicing, forward error correction, 4K mode and in-depth interleavers.

  18. Technology and Technique Standards for Camera-Acquired Digital Dermatologic Images: A Systematic Review.

    Science.gov (United States)

    Quigley, Elizabeth A; Tokay, Barbara A; Jewell, Sarah T; Marchetti, Michael A; Halpern, Allan C

    2015-08-01

    Photographs are invaluable dermatologic diagnostic, management, research, teaching, and documentation tools. Digital Imaging and Communications in Medicine (DICOM) standards exist for many types of digital medical images, but there are no DICOM standards for camera-acquired dermatologic images to date. To identify and describe existing or proposed technology and technique standards for camera-acquired dermatologic images in the scientific literature. Systematic searches of the PubMed, EMBASE, and Cochrane databases were performed in January 2013 using photography and digital imaging, standardization, and medical specialty and medical illustration search terms and augmented by a gray literature search of 14 websites using Google. Two reviewers independently screened titles of 7371 unique publications, followed by 3 sequential full-text reviews, leading to the selection of 49 publications with the most recent (1985-2013) or detailed description of technology or technique standards related to the acquisition or use of images of skin disease (or related conditions). No universally accepted existing technology or technique standards for camera-based digital images in dermatology were identified. Recommendations are summarized for technology imaging standards, including spatial resolution, color resolution, reproduction (magnification) ratios, postacquisition image processing, color calibration, compression, output, archiving and storage, and security during storage and transmission. Recommendations are also summarized for technique imaging standards, including environmental conditions (lighting, background, and camera position), patient pose and standard view sets, and patient consent, privacy, and confidentiality. Proposed standards for specific-use cases in total body photography, teledermatology, and dermoscopy are described. The literature is replete with descriptions of obtaining photographs of skin disease, but universal imaging standards have not been developed

  19. Internet of Things: Applications and Challenges in Technology and Standardization

    CERN Document Server

    Bandyopadhyay, Debasis

    2011-01-01

    The phrase Internet of Things (IoT) heralds a vision of the future Internet where connecting physical things, from banknotes to bicycles, through a network will let them take an active part in the Internet, exchanging information about themselves and their surroundings. This will give immediate access to information about the physical world and the objects in it leading to innovative services and increase in efficiency and productivity. This paper studies the state-of-the-art of IoT and presents the key technological drivers,potential applications, challenges and future research areas in the domain of IoT. IoT definitions from different perspective in academic and industry communities are also discussed and compared. Finally some major issues of future research in IoT are identified and discussed briefly.

  20. Exemplary Design Envelope Specification for Standard Modular Hydropower Technology

    Energy Technology Data Exchange (ETDEWEB)

    Witt, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, Brennan T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tsakiris, Achilleas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Papanicolaou, Thanos [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Pries, Jason L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Burress, Timothy A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stewart, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lee, Kyutae [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); DeNeale, Scott T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bevelhimer, Mark S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pracheil, Brenda M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McManamay, Ryan A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ekici, Kivanc [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Kutz, Benjamin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Curd, Shelaine L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bishop, Norm [Knight Piesold, Denver, CO (United States); Welch, Tim [U.S. Department of Energy (DOE), Washington, DC (United States). Office of Energy Efficiency and Renewable Energy (EERE); Rabon, Daniel [U.S. Department of Energy (DOE), Washington, DC (United States). Office of Energy Efficiency and Renewable Energy (EERE); Fernandez, Alisha [McKeown and Associates, Moberly, MO (United States)

    2017-02-01

    Hydropower is an established, affordable renewable energy generation technology supplying nearly 18% of the electricity consumed globally. A hydropower facility interacts continuously with the surrounding water resource environment, causing alterations of varying magnitude in the natural flow of water, energy, fish, sediment, and recreation upstream and downstream. A universal challenge in facility design is balancing the extraction of useful energy and power system services from a stream with the need to maintain ecosystem processes and natural environmental function. On one hand, hydroelectric power is a carbon-free, renewable, and flexible asset to the power system. On the other, the disruption of longitudinal connectivity and the artificial barrier to aquatic movement created by hydraulic structures can produce negative impacts that stress fresh water environments. The growing need for carbon-free, reliable, efficient distributed energy sources suggests there is significant potential for hydropower projects that can deploy with low installed costs, enhanced ecosystem service offerings, and minimal disruptions of the stream environment.

  1. Codes and Standards Requirements for Deployment of Emerging Fuel Cell Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Burgess, R.; Buttner, W.; Riykin, C.

    2011-12-01

    The objective of this NREL report is to provide information on codes and standards (of two emerging hydrogen power fuel cell technology markets; forklift trucks and backup power units), that would ease the implementation of emerging fuel cell technologies. This information should help project developers, project engineers, code officials and other interested parties in developing and reviewing permit applications for regulatory compliance.

  2. Standard and innovation, factors of success in technology management; Standard und Innovation - Erfolgsfaktoren im Technikmanagement

    Energy Technology Data Exchange (ETDEWEB)

    Beimdieck, J. [DSK Anthrazit Ibbenbueren GmbH, Ibbenbueren (Germany)

    2003-08-01

    At Ibbenbueren mine, all roadways are constructed by drilling and shotfiring. The 'System Ibbenbueren' concept comprises parallel working processes and vast options for optimization. It is applied with consequent and meets the requirements of efficient, low-cost driving combined with a high degree of standardization. [German] Auf dem Bergwerk Ibbenbueren werden alle Strecken durch Bohr- und Sprengarbeit aufgefahren. Das seit Jahren verwendete, komplexe Auffahrungssystem Sprengvortrieb mit Kombiausbau 'System Ibbenbueren' mit seinen parallel gestalteten Arbeitsablaeufen bietet eine Fuelle von Optimierungsmoeglichkeiten. Bei konsequenter Nutzung erfuellt es die Forderung nach leistungsfaehigen und gleichzeitig kostenguenstigen Streckenvortrieben in Kombination mit einem hohen Standardisierungsgrad. (orig.)

  3. Agribusiness Standards: A Comparison of the Choices of Utah Agriscience and Technology Teachers and Agribusiness Representatives.

    Science.gov (United States)

    Joerger, Richard M.; Andreasen, Randall

    2000-01-01

    Secondary agriscience teachers (n=13) and agribusiness leaders (n=12) validated standards and objectives for agribusiness education in Utah, recommending a core of 12 standards. Written and oral communication skills and technologies for agricultural management and quality control were most important. (Contains 20 references.) (SK)

  4. [The practice and proposals for standardized management of neonatal insulation technology].

    Science.gov (United States)

    Wang, Xi; Xiong, Ying; Hu, Yanling; Zhang, Xuelong

    2012-05-01

    In clinical practice, incubators can contribute to better diagnosis and treatment of diseases. Currently, insulation medical equipment used for the newborn are mainly warm-boxes. With the use popularity of warm-boxes in the country, medical accidents caused by improper use are on the increase. According to neonatal insulation technology and standardized management of practice, this article puts forward technical requirements of infant incubators with constant temperature and humidity, operation regulations and management specifications to better regulate the use of such devices. Meanwhile, it also suggests national related departments to formulate "incubator technology management norms" and "warm-box technology and practice", intending to standardize industry behaviors and ensure medical safety.

  5. A Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Brennan T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Welch, Tim [U.S. Department of Energy (DOE), Washington, DC (United States).Office of Energy Efficiency and Renewable Energy (EERE); Witt, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stewart, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lee, Kyutae [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); DeNeale, Scott T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bevelhimer, Mark S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Burress, Timothy A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pracheil, Brenda M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pries, Jason L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); O' Connor, Patrick W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Curd, Shelaine L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ekici, Kivanc [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Papanicolaou, Thanos [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Tsakiris, Achilleas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Kutz, Benjamin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Bishop, Norm [Knight Piesold, Denver, CO (United States); McKeown, Alisha [McKeown and Associates, Moberly, MO (United States); Rabon, Daniel [U.S. Department of Energy (DOE), Washington, DC (United States).Office of Energy Efficiency and Renewable Energy (EERE); Zimmerman, Gregory P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Uria Martinez, Rocio [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McManamay, Ryan A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-02-01

    The Multi-Year Plan for Research, Development, and Prototype Testing of Standard Modular Hydropower Technology (MYRP) presents a strategy for specifying, designing, testing, and demonstrating the efficacy of standard modular hydropower (SMH) as an environmentally compatible and cost-optimized renewable electricity generation technology. The MYRP provides the context, background, and vision for testing the SMH hypothesis: if standardization, modularity, and preservation of stream functionality become essential and fully realized features of hydropower technology, project design, and regulatory processes, they will enable previously unrealized levels of new project development with increased acceptance, reduced costs, increased predictability of outcomes, and increased value to stakeholders. To achieve success in this effort, the MYRP outlines a framework of stakeholder-validated criteria, models, design tools, testing facilities, and assessment protocols that will facilitate the development of next-generation hydropower technologies.

  6. Technical standardization of oil well abandonment: a review of current standards and technologies

    Energy Technology Data Exchange (ETDEWEB)

    Suzart, J. Walter P.; Pessoa, Laudemar; Paiva, Maria [Halliburton Energy Services (HES), Duncan, OK (United States)

    2008-07-01

    The objective of this study is to provide a new methodology for well abandonment. This practice is becoming more and more important because of the increasing number of production fields being abandoned. We strongly recommend a study of cement slurries properties for specific use in temporary and permanent abandonment plugs based on the estimation of the cement slurry hardened when placed in the well. By using specific additives, it is possible to achieve very stable slurries. For example, when permeability is reduced, formation fluid migration can be blocked and chemical reactions between the fluid and the slurry may be inhibited. With this objective, we present a laboratory investigation model and an example of slurry testing recommendation. During the abandonment operation, all records of the well characteristics should be maintained to include the reason for the abandonment, and location of fresh water, brine, and hydrocarbon zones that may exist. This documentation will also allow the analysis of solutions for the problems that originally caused the abandonment of the well. This data could be important for future use by environmental protection commissions to reopen or to drill an adjacent well. Given the high price of oil, it may now be economically feasible to reopen the well, if the reason for abandonment was low productivity. This way, a critical analysis of the current conditions of well and field abandonment in the country is presented. Based on this information, a review of the current standards is suggested. (author)

  7. Standardization of quantum technologies and QKD activities within ETSI (Conference Presentation)

    Science.gov (United States)

    Lenhart, Gaby

    2016-04-01

    In order to establish new ICT technologies successfully on the market it is essential to build trust within any potential users. This is especially true for technologies which are based upon paradigms that are not yet familiar to these users, such as quantum technologies. Technical standards are an excellent means to offer a certain degree of legal reliability and technical interoperability that is required by industry for commercial take up. While such standards on the one hand must be clear enough to provide strict rules for implementers, on the other hand they also must remain flexible enough to not restrict progress in further research and development on the standardized technology. Hence such standards have to be produced by a wide variety of stakeholders taking into account all their different needs. The paper will provide some insight into the general mechanisms of standardization and their relation to quantum technologies. Alongside with the relevance of standardization as an enabler for certification of quantum based technologies it will explain its potential for securing intellectual property. In its first part paper will concentrate on the advantages of standardization and discuss fears some of the stakeholders share, in detail. The second part will focus on the technical work going on in ETSI in relation to quantum technologies. In 2008 ETSI created a standards work group on Quantum Key Distribution, the ETSI ISG QKD and more recently a group on Quantum-Safe Cryptography, the ETSI ISG QSC. A significant part of the technical work of these groups has already been published and will be introduced in the following. However a big share of work is still ongoing and lot more is planned for the future, as are continuous revisions and updates of the published specifications. This standardization work covers several levels: It starts of by problem statements in the form of use cases, from which technical requirements can be derived. These requirements then form

  8. "Collaboration technology": a case study of innovation in order set and clinical care standardization.

    Science.gov (United States)

    Yount, Brian; McNamara, Timothy

    2008-11-06

    Effective standardization of clinical processes, which is a growing priority for healthcare provider organizations and networks, requires effective teamwork among clinicians and staff from multidisciplinary backgrounds--often from geographically dispersed facilities--to reach consensus on care practices. Yet, most healthcare provider organizations have no precedence or tools for managing large-scale, sustained, collaborative activities. This presentation explores the human and social implications of technology. It specifically addresses healthcare collaboration and describes how innovative collaboration management technologies can be used in the healthcare industry to accelerate care standardization, order set standardization and other initiatives necessary for successful computerized provider order entry and electronic health record deployments. These topics are explored through presentation of a survey of healthcare executives and a case study of an advanced collaboration application that was adapted and deployed in a partnership between a large healthcare provider organization and a commercial developer of document management and collaboration management technologies.

  9. From the primordial soup to self-driving cars: standards and their role in natural and technological innovation.

    Science.gov (United States)

    Wagner, Andreas; Ortman, Scott; Maxfield, Robert

    2016-02-01

    Standards are specifications to which the elements of a technology must conform. Here, we apply this notion to the biochemical 'technologies' of nature, where objects like DNA and proteins, as well as processes like the regulation of gene activity are highly standardized. We introduce the concept of standards with multiple examples, ranging from the ancient genetic material RNA, to Palaeolithic stone axes, and digital electronics, and we discuss common ways in which standards emerge in nature and technology. We then focus on the question of how standards can facilitate technological and biological innovation. Innovation-enhancing standards include those of proteins and digital electronics. They share common features, such as that few standardized building blocks can be combined through standard interfaces to create myriad useful objects or processes. We argue that such features will also characterize the most innovation-enhancing standards of future technologies.

  10. Silica optical fiber technology for devices and components design, fabrication, and international standards

    CERN Document Server

    Oh, Kyunghwan

    2012-01-01

    From basic physics to new products, Silica Optical Fiber Technology for Device and Components examines all aspects of specialty optical fibers. Moreover, the inclusion of the latest international standards governing optical fibers enables you to move from research to fabrication to commercialization. Reviews all the latest specialty optical fiber technologies, including those developed for high capacity WDM applications; broadband fiber amplifiers; fiber filleters based on periodic coupling; fiber branching devices; and fiber terminations Discusses key differences among sing

  11. NextGen Technologies on the FAA's Standard Terminal Automation Replacement System

    Science.gov (United States)

    Witzberger, Kevin; Swenson, Harry; Martin, Lynne; Lin, Melody; Cheng, Jinn-Hwei

    2014-01-01

    This paper describes the integration, evaluation, and results from a high-fidelity human-in-the-loop (HITL) simulation of key NASA Air Traffic Management Technology Demonstration - 1 (ATD- 1) technologies implemented in an enhanced version of the FAA's Standard Terminal Automation Replacement System (STARS) platform. These ATD-1 technologies include: (1) a NASA enhanced version of the FAA's Time-Based Flow Management, (2) a NASA ground-based automation technology known as controller-managed spacing (CMS), and (3) a NASA advanced avionics airborne technology known as flight-deck interval management (FIM). These ATD-1 technologies have been extensively tested in large-scale HITL simulations using general-purpose workstations to study air transportation technologies. These general purpose workstations perform multiple functions and are collectively referred to as the Multi-Aircraft Control System (MACS). Researchers at NASA Ames Research Center and Raytheon collaborated to augment the STARS platform by including CMS and FIM advisory tools to validate the feasibility of integrating these automation enhancements into the current FAA automation infrastructure. NASA Ames acquired three STARS terminal controller workstations, and then integrated the ATD-1 technologies. HITL simulations were conducted to evaluate the ATD-1 technologies when using the STARS platform. These results were compared with the results obtained when the ATD-1 technologies were tested in the MACS environment. Results collected from the numerical data show acceptably minor differences, and, together with the subjective controller questionnaires showing a trend towards preferring STARS, validate the ATD-1/STARS integration.

  12. Technological, economic, and political feasibility in OSHA's Air Contaminants Standard

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, J.C.; Paxman, D.G. (Univ. of California, Berkeley (USA))

    In 1989, after almost two decades of substance-by-substance standard setting, the Occupational Safety and Health Administration (OSHA) promulgated its Air Contaminants Standard, imposing new exposure limits for 376 toxic substances encountered in U.S. industry. In marked contrast to earlier regulations, the Air Contaminants Standard has generated relatively little industry opposition. This paper analyzes the standard in the context of the twenty-year debate over the appropriate role for technological feasibility and economic compliance costs in occupational health policy. The political feasibility of the new standard is traced to OSHA's abandonment of technology forcing in favor of reliance on off-the-shelf technologies already in use in major firms. While important as an embodiment of OSHA's new generic approach to regulation, the Air Contaminants Standard cannot serve as a model for future occupational health policy, due to its reliance on informal, closed-door mechanisms for establishing regulatory priorities and permissible exposure limits. 20 refs.

  13. Integrated Photodiodes in Standard CMOS Technology for CD and DVD Applications

    NARCIS (Netherlands)

    Radovanovic, S.; Annema, Anne J.; Nauta, Bram

    2004-01-01

    The influence of two different geometries (layouts) and two structures of high-speed photodiodes in fully standard 0.18 μm CMOS technology on their intrinsic (physical) and electrical bandwidths is analyzed. In addition, a possible application of the integrated photodiodes for the CD and DVD optical

  14. Analysis of the high-speed polysilicon photodetector in fully standard CMOS technology

    NARCIS (Netherlands)

    Radovanović, S.; Annema, A.J.; Nauta, B.

    2003-01-01

    A high-performance lateral polysilicon photodiode was designed in standard 0.18 um CMOS technology. The device has a frequency bandwidth far in the GHz range: the measured bandwidth of the poly photodiode was 6 GHz, which gure was limited by the measurement equipment. The high intrinsic (physical) b

  15. Analysis of the IEEE 802.20 norm as the standard for developing new wireless technologies

    Directory of Open Access Journals (Sweden)

    Danilo A López Sarmiento

    2015-10-01

    Full Text Available This paper aims to compile existing information on the IEEE 802.20 standard and unify it in a document that will serve as support for parties interested in conducting research and / or projects related to wireless technologies.

  16. Hybrid tooling technologies and standardization for the manufacturing of inserts for micro injection molding

    DEFF Research Database (Denmark)

    Tosello, Guido; Fillon, Bertrand; Azcarate, Sabino

    2007-01-01

    . A metrological approach was applied to standardize the employed tooling processes (micro milling, µEDM, laser micromachining, electrochemical µ-milling). The micro tools were then tested with different polymers (PP, PP + nano fillers, PC, COC). The paper provides a comparison of these technologies concerning...

  17. Technology Leadership and Its Relationship with School-Malaysia Standard of Education Quality (School-MSEQ)

    Science.gov (United States)

    Hamzah, Mohd Izham Mohd; Juraime, Faridah; Hamid, Aida Hanim A.; Nordin, Norazah; Attan, Noraini

    2014-01-01

    This study examined the level of technology leadership practice among administrators in High Performing Schools (HPS) and its relationship with School-Malaysia Standard of Education Quality (School-MSEQ). A set of questionnaires was administered to 96 administrators in 12 HPS of secondary schools category. The data were analysed and interpreted…

  18. Integrated Photodiodes in Standard CMOS Technology for CD and DVD Applications

    NARCIS (Netherlands)

    Radovanovic, S.; Annema, Anne J.; Nauta, Bram

    The influence of two different geometries (layouts) and two structures of high-speed photodiodes in fully standard 0.18 μm CMOS technology on their intrinsic (physical) and electrical bandwidths is analyzed. In addition, a possible application of the integrated photodiodes for the CD and DVD optical

  19. Standardization as emerging content in technology education at all levels of education

    NARCIS (Netherlands)

    D.G. Choi (Dong Geun); H.J. de Vries (Henk)

    2011-01-01

    textabstractIntegration of standardization into different levels of technology education has surfaced as a critical issue for educational practitioners and policy makers at national and regional (APEC, EU) level. In this paper, we describe and analyze empirical data collected from 118 educational

  20. Standardization as emerging content in technology education at all levels of education

    NARCIS (Netherlands)

    D.G. Choi (Dong Geun); H.J. de Vries (Henk)

    2011-01-01

    textabstractIntegration of standardization into different levels of technology education has surfaced as a critical issue for educational practitioners and policy makers at national and regional (APEC, EU) level. In this paper, we describe and analyze empirical data collected from 118 educational ex

  1. Characterization of Single-Photon Avalanche Diodes in Standard 140-nm SOI CMOS Technology

    NARCIS (Netherlands)

    Lee, M.J.; Sun, P.; Charbon, E.

    2015-01-01

    We report on the characterization of single-photon avalanche diodes (SPADs) fabricated in standard 140-nm silicon on insulator (SOI) complementary metal-oxide-semiconductor (CMOS) technology. As a methodology for SPAD optimization, a test structure array, called SPAD farm, was realized with several

  2. Hybrid tooling technologies and standardization for the manufacturing of inserts for micro injection molding

    DEFF Research Database (Denmark)

    Tosello, Guido; Fillon, Bertrand; Azcarate, Sabino;

    2007-01-01

    . A metrological approach was applied to standardize the employed tooling processes (micro milling, µEDM, laser micromachining, electrochemical µ-milling). The micro tools were then tested with different polymers (PP, PP + nano fillers, PC, COC). The paper provides a comparison of these technologies concerning...

  3. Standardized Low-Power Wireless Communication Technologies for Distributed Sensing Applications

    Directory of Open Access Journals (Sweden)

    Xavier Vilajosana

    2014-02-01

    Full Text Available Recent standardization efforts on low-power wireless communication technologies, including time-slotted channel hopping (TSCH and DASH7 Alliance Mode (D7AM, are starting to change industrial sensing applications, enabling networks to scale up to thousands of nodes whilst achieving high reliability. Past technologies, such as ZigBee, rooted in IEEE 802.15.4, and ISO 18000-7, rooted in frame-slotted ALOHA (FSA, are based on contention medium access control (MAC layers and have very poor performance in dense networks, thus preventing the Internet of Things (IoT paradigm from really taking off. Industrial sensing applications, such as those being deployed in oil refineries, have stringent requirements on data reliability and are being built using new standards. Despite the benefits of these new technologies, industrial shifts are not happening due to the enormous technology development and adoption costs and the fact that new standards are not well-known and completely understood. In this article, we provide a deep analysis of TSCH and D7AM, outlining operational and implementation details with the aim of facilitating the adoption of these technologies to sensor application developers.

  4. Standardized low-power wireless communication technologies for distributed sensing applications.

    Science.gov (United States)

    Vilajosana, Xavier; Tuset-Peiro, Pere; Vazquez-Gallego, Francisco; Alonso-Zarate, Jesus; Alonso, Luis

    2014-02-10

    Recent standardization efforts on low-power wireless communication technologies, including time-slotted channel hopping (TSCH) and DASH7 Alliance Mode (D7AM), are starting to change industrial sensing applications, enabling networks to scale up to thousands of nodes whilst achieving high reliability. Past technologies, such as ZigBee, rooted in IEEE 802.15.4, and ISO 18000-7, rooted in frame-slotted ALOHA (FSA), are based on contention medium access control (MAC) layers and have very poor performance in dense networks, thus preventing the Internet of Things (IoT) paradigm from really taking off. Industrial sensing applications, such as those being deployed in oil refineries, have stringent requirements on data reliability and are being built using new standards. Despite the benefits of these new technologies, industrial shifts are not happening due to the enormous technology development and adoption costs and the fact that new standards are not well-known and completely understood. In this article, we provide a deep analysis of TSCH and D7AM, outlining operational and implementation details with the aim of facilitating the adoption of these technologies to sensor application developers.

  5. ADEpedia: a scalable and standardized knowledge base of Adverse Drug Events using semantic web technology.

    Science.gov (United States)

    Jiang, Guoqian; Solbrig, Harold R; Chute, Christopher G

    2011-01-01

    A source of semantically coded Adverse Drug Event (ADE) data can be useful for identifying common phenotypes related to ADEs. We proposed a comprehensive framework for building a standardized ADE knowledge base (called ADEpedia) through combining ontology-based approach with semantic web technology. The framework comprises four primary modules: 1) an XML2RDF transformation module; 2) a data normalization module based on NCBO Open Biomedical Annotator; 3) a RDF store based persistence module; and 4) a front-end module based on a Semantic Wiki for the review and curation. A prototype is successfully implemented to demonstrate the capability of the system to integrate multiple drug data and ontology resources and open web services for the ADE data standardization. A preliminary evaluation is performed to demonstrate the usefulness of the system, including the performance of the NCBO annotator. In conclusion, the semantic web technology provides a highly scalable framework for ADE data source integration and standard query service.

  6. Leveraging electronic healthcare record standards and semantic web technologies for the identification of patient cohorts.

    Science.gov (United States)

    Fernández-Breis, Jesualdo Tomás; Maldonado, José Alberto; Marcos, Mar; Legaz-García, María del Carmen; Moner, David; Torres-Sospedra, Joaquín; Esteban-Gil, Angel; Martínez-Salvador, Begoña; Robles, Montserrat

    2013-12-01

    The secondary use of electronic healthcare records (EHRs) often requires the identification of patient cohorts. In this context, an important problem is the heterogeneity of clinical data sources, which can be overcome with the combined use of standardized information models, virtual health records, and semantic technologies, since each of them contributes to solving aspects related to the semantic interoperability of EHR data. To develop methods allowing for a direct use of EHR data for the identification of patient cohorts leveraging current EHR standards and semantic web technologies. We propose to take advantage of the best features of working with EHR standards and ontologies. Our proposal is based on our previous results and experience working with both technological infrastructures. Our main principle is to perform each activity at the abstraction level with the most appropriate technology available. This means that part of the processing will be performed using archetypes (ie, data level) and the rest using ontologies (ie, knowledge level). Our approach will start working with EHR data in proprietary format, which will be first normalized and elaborated using EHR standards and then transformed into a semantic representation, which will be exploited by automated reasoning. We have applied our approach to protocols for colorectal cancer screening. The results comprise the archetypes, ontologies, and datasets developed for the standardization and semantic analysis of EHR data. Anonymized real data have been used and the patients have been successfully classified by the risk of developing colorectal cancer. This work provides new insights in how archetypes and ontologies can be effectively combined for EHR-driven phenotyping. The methodological approach can be applied to other problems provided that suitable archetypes, ontologies, and classification rules can be designed.

  7. Improving pest risk assessment and management through the aid of geospatial information technology standards

    Directory of Open Access Journals (Sweden)

    Trond Rafoss

    2013-09-01

    Full Text Available Delivery of geospatial information over the Internet for the management of risks from invasive alien species is an increasingly important service. The evolution of information technology standards for geospatial data is a key factor to simplify network publishing and exchange of maps and data. The World Wide Web Consortium (W3C-geolocation specification is a recent addition that may prove useful for pest risk management. In this article we implement the W3C-geolocation specification and Open Geospatial Consortium (OGC mapping standards in a Web browser application for smartphones and tablet computers to improve field surveys for alien invasive species. We report our first season field experiences using this tool for online mapping of plant disease outbreaks and host plant occurrence. It is expected that the improved field data collection tools will result in increased data availability and thereby new opportunities for risk assessment, because data-needs and availability are crucial for species distribution modelling and model-based forecasts of pest establishment potential. Finally, we close with a comment on the future potential of geospatial information standards to enhance the translation from data to decisions regarding pest risks, which should enable earlier detection of emerging risks as well as more robust projections of pest risks in novel areas. The forthcoming standard for processing of geospatial information, the Web Processing Standard (WPS, should open new technological capabilities both for automatic initiation and updating of risk assessment models based on new incoming data, and subsequent early warning.

  8. Recommendation of standardized health learning contents using archetypes and semantic web technologies.

    Science.gov (United States)

    Legaz-García, María del Carmen; Martínez-Costa, Catalina; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás

    2012-01-01

    Linking Electronic Healthcare Records (EHR) content to educational materials has been considered a key international recommendation to enable clinical engagement and to promote patient safety. This would suggest citizens to access reliable information available on the web and to guide them properly. In this paper, we describe an approach in that direction, based on the use of dual model EHR standards and standardized educational contents. The recommendation method will be based on the semantic coverage of the learning content repository for a particular archetype, which will be calculated by applying semantic web technologies like ontologies and semantic annotations.

  9. Selection and Evaluation of Priority Domains in Global Energy Internet Standard Development Based on Technology Foresight

    Science.gov (United States)

    Jin, Yang; Ciwei, Gao; Jing, Zhang; Min, Sun; Jie, Yu

    2017-05-01

    The selection and evaluation of priority domains in Global Energy Internet standard development will help to break through limits of national investment, thus priority will be given to standardizing technical areas with highest urgency and feasibility. Therefore, in this paper, the process of Delphi survey based on technology foresight is put forward, the evaluation index system of priority domains is established, and the index calculation method is determined. Afterwards, statistical method is used to evaluate the alternative domains. Finally the top four priority domains are determined as follows: Interconnected Network Planning and Simulation Analysis, Interconnected Network Safety Control and Protection, Intelligent Power Transmission and Transformation, and Internet of Things.

  10. Models and standards for production systems integration: Technological process and documents

    Directory of Open Access Journals (Sweden)

    Lečić Danica

    2005-01-01

    Full Text Available Electronic business demands from production companies to collaborate with customers, suppliers and end users and start electronic manufacturing. To achieve this goal companies have to integrate their subsystems (Application to Application-A2A and they have to collaborate with their business partners (Business to Business - B2B. For this purpose models and unique standards for integration are necessary. In this paper, ebXML and OAGI specifications have been used to present metamodel process by UML class diagram and standardized model of document Working Order for technological process in the form of OAGI BOD XML document. Based on it, from an example, model of technological process is presented by activity diagram (DA in XML form and an appearance of document Working Order. Just as well, rules of transformation DA to XML are presented.

  11. Are teacher candidates able to use educational technologies effectively? A case study in terms of standards

    Directory of Open Access Journals (Sweden)

    Ahmet Naci Çoklar

    2010-07-01

    Full Text Available The present study aims at investigating the educational technology use of teacher candidates attending education faculties in Turkey in terms of NETS*T standards. The study employed 2.566 senior teacher candidates from 7 different universities in Turkey. As a result of the study, it was revealed that the teacher candidates considered themselves to have a high level of self-efficacy with respect to educational technology standards as a whole. Considering the factors, teacher candidates reported the highest level of self-efficacy for the factor of productivity and professional practices and the lowest level of f-self-efficacy for the factor of social, ethical, legal and human issues. Gender caused differences for certain factors. In addition, the department being attended was another variable that resulted in difference when the departments of the teacher candidates were taken into consideration. 

  12. Are teacher candidates able to use educational technologies effectively? A case study in terms of standards

    Directory of Open Access Journals (Sweden)

    Ahmet Naci Çoklar

    2010-07-01

    Full Text Available The present study aims at investigating the educational technology use of teacher candidates attending education faculties in Turkey in terms of NETS*T standards. The study employed 2.566 senior teacher candidates from 7 different universities in Turkey. As a result of the study, it was revealed that the teacher candidates considered themselves to have a high level of self-efficacy with respect to educational technology standards as a whole. Considering the factors, teacher candidates reported the highest level of self-efficacy for the factor of productivity and professional practices and the lowest level of f-self-efficacy for the factor of social, ethical, legal and human issues. Gender caused differences for certain factors. In addition, the department being attended was another variable that resulted in difference when the departments of the teacher candidates were taken into consideration.

  13. Critical parameters affecting the design of high frequency transmission lines in standard CMOS technology

    KAUST Repository

    Al-Attar, Talal

    2017-05-13

    Different structures of transmission lines were designed and fabricated in standard CMOS technology to estimate some critical parameters including the RMS value of the surface roughness and the loss tangent. The input impedances for frequencies up to 50 GHz were modeled and compared with measurements. The results demonstrated a strong correlation between the used model with the proposed coefficients and the measured results, attesting the robustness of the model and the reliability of the incorporated coefficients values.

  14. California Diploma Project Technical Report II: Alignment Study--Alignment Study of the Health Sciences and Medical Technology Draft Standards and California's Exit Level Common Core State Standards

    Science.gov (United States)

    McGaughy, Charis; de Gonzalez, Alicia

    2012-01-01

    The California Department of Education is in the process of revising the Career and Technical Education (CTE) Model Curriculum Standards. The Educational Policy Improvement Center (EPIC) conducted an investigation of the draft version of the Health Sciences and Medical Technology Standards (Health Science). The purpose of the study is to…

  15. Embedded Web Technology: Applying World Wide Web Standards to Embedded Systems

    Science.gov (United States)

    Ponyik, Joseph G.; York, David W.

    2002-01-01

    Embedded Systems have traditionally been developed in a highly customized manner. The user interface hardware and software along with the interface to the embedded system are typically unique to the system for which they are built, resulting in extra cost to the system in terms of development time and maintenance effort. World Wide Web standards have been developed in the passed ten years with the goal of allowing servers and clients to intemperate seamlessly. The client and server systems can consist of differing hardware and software platforms but the World Wide Web standards allow them to interface without knowing about the details of system at the other end of the interface. Embedded Web Technology is the merging of Embedded Systems with the World Wide Web. Embedded Web Technology decreases the cost of developing and maintaining the user interface by allowing the user to interface to the embedded system through a web browser running on a standard personal computer. Embedded Web Technology can also be used to simplify an Embedded System's internal network.

  16. Digital health technology and trauma: development of an app to standardize care.

    Science.gov (United States)

    Hsu, Jeremy M

    2015-04-01

    Standardized practice results in less variation, therefore reducing errors and improving outcome. Optimal trauma care is achieved through standardization, as is evidenced by the widespread adoption of the Advanced Trauma Life Support approach. The challenge for an individual institution is how does one educate and promulgate these standardized processes widely and efficiently? In today's world, digital health technology must be considered in the process. The aim of this study was to describe the process of developing an app, which includes standardized trauma algorithms. The objective of the app was to allow easy, real-time access to trauma algorithms, and therefore reduce omissions/errors. A set of trauma algorithms, relevant to the local setting, was derived from the best available evidence. After obtaining grant funding, a collaborative endeavour was undertaken with an external specialist app developing company. The process required 6 months to translate the existing trauma algorithms into an app. The app contains 32 separate trauma algorithms, formatted as a single-page flow diagram. It utilizes specific smartphone features such as 'pinch to zoom', jump-words and pop-ups to allow rapid access to the desired information. Improvements in trauma care outcomes result from reducing variation. By incorporating digital health technology, a trauma app has been developed, allowing easy and intuitive access to evidenced-based algorithms. © 2015 Royal Australasian College of Surgeons.

  17. Improved Access to Scientific Data Through Technology, Standards, and Best Practices

    Science.gov (United States)

    Narock, T. W.; Arko, R. A.; Chandler, C. L.; Rozell, E. A.

    2013-12-01

    The increasing volume, complexity, and heterogeneity of scientific data are posing challenges to public access to data. These challenges also affect the assessment of impact and accountability. Yet, we are beginning to see that a confluence of standards and best practices can lead to improved accessibility and increased sustainability. We present examples of how Linked Open Data, standards, and best practices are being used to automate the linking of heterogeneous datasets as well as link data to publication. Specifically, we highlight our work in making data from the oceanographic community, the National Science Foundation, and professional societies, including the AGU and the Earth Science Information Partnership, more connected and more easily accessible and usable. We highlight the benefits of emerging semantic technologies, which enable automated reasoning and we show examples from the oceanographic research community. We discuss how technologies, standards, and best practices are leading to improvements in finding, accessing, and using data and publications. Finally, we demonstrate how these techniques and standards are being used to promote sustainable and scalable data repositories.

  18. Standards

    Directory of Open Access Journals (Sweden)

    Gabriel Jacobs

    1993-12-01

    Full Text Available One of the aims of ALT is to promote good practice in the use of learning technology within higher education. Few would not subscribe to this aim, but proclaiming it without a full awareness of the problems it entails is of the same order as proclaiming one's commitment to Peace without further comment. Except for the absolute pacifist, being against war does not mean being against it at any price, but rather being committed to ensuring circumstances in which war will not occur. So it is with good practice in educational technology, which can be achieved only if circumstances are propitious. Such circumstances include sufficient funds, and a willingness in both teacher and learner to accept in whole or in part a technological route – good practice is unlikely to be achieved if technology has been incorporated into the curriculum merely in order to ensure that funds already spent do not appear to have been wasted. Above all, in my view, good practice assumes that users of learning technology are able to concentrate on learning without (necessarily thinking about the technology, since if the technology cannot be made to work transparently, actual practice will at best lag behind ideal practice, and at worst be abandoned altogether. Impatience is a barrier to learning, and particularly if it is the result of struggling with the learning tools themselves. If the teacher or learner is constantly having to tweak the technology, or ending up with a half-baked implementation because the setting-up process has proven too difficult, the learning tool may well be left to gather dust.

  19. Industry Standards for Technological Design and Construction Drawing Design of Rubber Factories Carried Out on August 1

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    On May 18, Ministry of Industry and Information Technology approved 2 industry standards of Rules of Technological Design Technology of Rubber Factories(HG/T 21558-2011) and Rules of Rubber Factories Construction Drawing Design Document Content and Depth (HG/T 21511-2011), which are to be carried out on August 1.

  20. PROFESSIONAL STANDARDS, INFORMATION AND COMMUNICATION TECHNOLOGIES AND MANAGEMENT IN AEROSPACE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Orlov A. I.

    2016-04-01

    Full Text Available We should have trained staff to implement innovative strategies. Therefore, it is natural, that a lot of attention is paid to the staffing of the management processes of innovative activity at the enterprises of the rocket and space industry (RCP. Training and human resources management in accordance with current legislation should be based on professional standards. The content of professional standards should reflect the results of forecasting scientific and technical progress in the field, for example, in the RCP. It is necessary to forecast trends in the use of information and communication technologies in solving management problems in the socio-economic sphere in order to reflect these developments in professional standards. The approach to solving this problem is the subject of this article. What should the professional standard be like in the RCP? The main problem lies in the fact that although the standard is to be enacted in the near future, its actual impact on the industry will start in 5 - 10 years and will continue for at least another 10 years, ie, until the 2030s. Professional standards should come from "Education through Science" concept, ie, knowledge, skills, competences, provided by a professional standard, should be based on modern scientific achievements. For example, mathematical methods of research should be based on a new paradigm in the area of knowledge and statistical data analysis methods must meet high statistical techniques. For the development of professional standards in the field of the RCP it is necessary to predict the characteristics of the qualification (level of knowledge, skills and experience required the employee to carry out professional activities in the RCP in 2020 - 2030. Modern information and communication technologies are creating a fundamentally new situation in the organization of the economy. We have an ability to manage the work of organizational units, scattered throughout the world, from a

  1. Gap analysis survey: an aid in transitioning to standardized curricula for nuclear medicine technology.

    Science.gov (United States)

    Bires, Angela Macci; Mason, Donna L; Gilmore, David; Pietrzyk, Carly

    2012-09-01

    This article discusses the process by which the Society of Nuclear Medicine Technology Section (SNMTS) is assisting educators as they transition to comply with the fourth edition of the Curriculum Guide for Educational Programs in Nuclear Medicine Technology. An electronic survey was sent to a list of nuclear medicine technology programs compiled by the educational division of the SNMTS. The collected data included committee member demographics, goals and objectives, conference call minutes, consultation discussions, transition examples, 4- and 2-y program curricula, and certificate program curricula. There were 56 responses to the survey. All respondents were program directors, with 3 respondents having more than one type of program, for a total of 59 programs. Of these, 19 (33.93%) were baccalaureate, 19 (28.57%) associate, and 21 (37.5%) certificate. Forty-eight respondents (85.71%) had accreditation through the Joint Review Commission on Educational Programs in Nuclear Medicine Technology, 6 (10.71%) had regional accreditation, and 2 (3.57%) were accredited through other entities. Thirteen categories of required general education courses were identified, and the existing program curricula of 9 (69.2%) courses were more than 50% compliant with the fourth edition Curriculum Guide. The fact that no measurable gap could be found within the didactic professional content across programs was due to the lack of a degree requirement and content standardization within the profession. The data indicated that the participating programs offer a minimum of 1-15 contact hours in emerging technology modalities. The required clinical hours ranged from 765 to 1,920 for degree or certificate completion. The average number of clinical hours required for all programs was 1,331.69. Standardization of the number and types of courses is needed both for current baccalaureate programs and for clinical education. This standardization will guide programs in transitioning from a

  2. Technology standard-setting under the lens of global administrative law : Accountability, participation and transparency of standard-setting organizations

    NARCIS (Netherlands)

    Kanevskaia, Olia

    2016-01-01

    The role of transnational non-governmental bodies in international standardization has often been in the limelight of recent academic discussions. While standards developed by Standard-Setting Organizations (SSOs) are typically non-binding, they can nevertheless acquire an obligatory character, eith

  3. Evaluation of condition and technological performance of hybrid bester reared in standard and aquaponic system

    Directory of Open Access Journals (Sweden)

    Lorena Dediu

    2011-10-01

    Full Text Available Bester sturgeon is considered a hybrid (cross between beluga Huso huso (Linnaeus, 1758female and sterlet Acipenser ruthenus Linnaeus, 1758 male with great potential for intensiveaquaculture technology due to its quality caviar and meat production. Apart from Russia, firstpromising experiments on sturgeon culture have been carried out in several European countries(Germany, Hungary, France and Japan as well as the U.S.A. Yet, in the field of bester sturgeonnutrition many authors consider that further investigation is desirable. In this context, the presentexperiment has as main goal the evaluation of bester capability for nutrients utilization and feedconversion under different feeding rates and environmental conditions. The trails were conducted in anexperimental recirculating system and an aquaponic system in different development stages. For bothexperiments “Troco supreme” fodder with 46% protein content was used. The feeding efficiency wasassessed through technological indicators. The fish condition (allometric factor and growthperformance was assessed for both rearing systems: standard RAS and aquaponic RAS.

  4. Standard Lunar Regolith Simulants for Space Resource Utilization Technologies Development: Effects of Materials Choices

    Science.gov (United States)

    Sibille, Laurent; Carpenter, Paul K.

    2006-01-01

    As NASA turns its exploration ambitions towards the Moon once again, the research and development of new technologies for lunar operations face the challenge of meeting the milestones of a fastpace schedule, reminiscent of the 1960's Apollo program. While the lunar samples returned by the Apollo and Luna missions have revealed much about the Moon, these priceless materials exist in too scarce quantities to be used for technology development and testing. The need for mineral materials chosen to simulate the characteristics of lunar regoliths is a pressing issue that is being addressed today through the collaboration of scientists, engineers and NASA program managers. The issue of reproducing the properties of lunar regolith for research and technology development purposes was addressed by the recently held 2005 Workshop on Lunar Regolith Simulant Materials at Marshall Space Flight Center. The recommendation of the workshop of establishing standard simulant materials to be used in lunar technology development and testing will be discussed here with an emphasis on space resource utilization. The variety of techniques and the complexity of functional interfaces make these simulant choices critical in space resource utilization.

  5. Discussion on Standardization and Technology of Integrated Disaster Decrease for Agrometeorological Disaster

    Institute of Scientific and Technical Information of China (English)

    Huo Zhiguo

    2011-01-01

    China is a large agricultural country,the losses due to agrometeorological disasters account for 70% to 80% of the total losses caused by agricultural natural disasters.Every year,a variety of meteorological disasters hit 5,000 hectares of crops and affect 400 million persons,with the economic losses over 200 billion Yuan.In recent years,under the influence of global climatic changes,the agrometeorological disasters have become increasingly serious;the affected area,the disaster rate and the economic loss are tending to increase.Therefore,strengthening the agricultural disasters prevention and mitigation,establishing standardization system of monitoring,early warning,evaluation and prevention and control technology for agricultural meteorology,and achieving the standardization of disaster monitoring,early warning and evaluation business are of great significance for prevention and mitigation of agricultural disasters in China.

  6. Second-order sigma-delta modulator in standard cmos technology

    Directory of Open Access Journals (Sweden)

    Milovanović Dragiša

    2004-01-01

    Full Text Available As a part of wider project sigma-delta modulator was designed. It represents an A/D part of a power meter IC. Requirements imposed were: SNDR and dynamic range > 50 dB for maximum input swing of 250 mV differential at 50 Hz. Over sampling ratio is 128 with clock frequency of 524288 Hz which gives bandwidth of 2048 Hz. Circuit is designed in 3.3 V supply standard CMOS 0.35 µm technology.

  7. Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards

    Energy Technology Data Exchange (ETDEWEB)

    Still, Dean K [Aprovecho Research Center, Cottage Grove, OR (United States); Hatfield, Micheal S [Aprovecho Research Center, Cottage Grove, OR (United States)

    2015-12-15

    Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards. Protecting public health has become a major motivation for investigating how improved cook stoves might function as a viable intervention. Currently, the great majority of cookstoves for sale in the developing world were not designed for this purpose but instead success was based on criteria such as reduced fuel use, affordability, and ease of use. With DOE funding Aprovecho Research Center spent three years creating stoves using an iterative development and modeling approach resulting in four stoves that in lab tests met the World Health Organization (2014) intermediate rate vented targets for PM2.5 and for CO.

  8. Nanotechnology Laboratory Continues Partnership with FDA and National Institute of Standards and Technology | Poster

    Science.gov (United States)

    The NCI-funded Nanotechnology Characterization Laboratory (NCL)—a leader in evaluating promising nanomedicines to fight cancer—recently renewed its collaboration with the U.S. Food and Drug Administration (FDA) and the National Institute of Standards and Technology (NIST) to continue its groundbreaking work on characterizing nanomedicines and moving them toward the clinic. In partnership with NIST and the FDA, NCL has laid a solid, scientific foundation for using the power of nanotechnology to increase the potency and target the delivery

  9. Use of Open Standards and Technologies at the Lunar Mapping and Modeling Project

    Science.gov (United States)

    Law, E.; Malhotra, S.; Bui, B.; Chang, G.; Goodale, C. E.; Ramirez, P.; Kim, R. M.; Sadaqathulla, S.; Rodriguez, L.

    2011-12-01

    The Lunar Mapping and Modeling Project (LMMP), led by the Marshall Space Flight center (MSFC), is tasked by NASA. The project is responsible for the development of an information system to support lunar exploration activities. It provides lunar explorers a set of tools and lunar map and model products that are predominantly derived from present lunar missions (e.g., the Lunar Reconnaissance Orbiter (LRO)) and from historical missions (e.g., Apollo). At Jet Propulsion Laboratory (JPL), we have built the LMMP interoperable geospatial information system's underlying infrastructure and a single point of entry - the LMMP Portal by employing a number of open standards and technologies. The Portal exposes a set of services to users to allow search, visualization, subset, and download of lunar data managed by the system. Users also have access to a set of tools that visualize, analyze and annotate the data. The infrastructure and Portal are based on web service oriented architecture. We designed the system to support solar system bodies in general including asteroids, earth and planets. We employed a combination of custom software, commercial and open-source components, off-the-shelf hardware and pay-by-use cloud computing services. The use of open standards and web service interfaces facilitate platform and application independent access to the services and data, offering for instances, iPad and Android mobile applications and large screen multi-touch with 3-D terrain viewing functions, for a rich browsing and analysis experience from a variety of platforms. The web services made use of open standards including: Representational State Transfer (REST); and Open Geospatial Consortium (OGC)'s Web Map Service (WMS), Web Coverage Service (WCS), Web Feature Service (WFS). Its data management services have been built on top of a set of open technologies including: Object Oriented Data Technology (OODT) - open source data catalog, archive, file management, data grid framework

  10. Assessing the quality of decision support technologies using the International Patient Decision Aid Standards instrument (IPDASi.

    Directory of Open Access Journals (Sweden)

    Glyn Elwyn

    Full Text Available OBJECTIVES: To describe the development, validation and inter-rater reliability of an instrument to measure the quality of patient decision support technologies (decision aids. DESIGN: Scale development study, involving construct, item and scale development, validation and reliability testing. SETTING: There has been increasing use of decision support technologies--adjuncts to the discussions clinicians have with patients about difficult decisions. A global interest in developing these interventions exists among both for-profit and not-for-profit organisations. It is therefore essential to have internationally accepted standards to assess the quality of their development, process, content, potential bias and method of field testing and evaluation. METHODS: Scale development study, involving construct, item and scale development, validation and reliability testing. PARTICIPANTS: Twenty-five researcher-members of the International Patient Decision Aid Standards Collaboration worked together to develop the instrument (IPDASi. In the fourth Stage (reliability study, eight raters assessed thirty randomly selected decision support technologies. RESULTS: IPDASi measures quality in 10 dimensions, using 47 items, and provides an overall quality score (scaled from 0 to 100 for each intervention. Overall IPDASi scores ranged from 33 to 82 across the decision support technologies sampled (n = 30, enabling discrimination. The inter-rater intraclass correlation for the overall quality score was 0.80. Correlations of dimension scores with the overall score were all positive (0.31 to 0.68. Cronbach's alpha values for the 8 raters ranged from 0.72 to 0.93. Cronbach's alphas based on the dimension means ranged from 0.50 to 0.81, indicating that the dimensions, although well correlated, measure different aspects of decision support technology quality. A short version (19 items was also developed that had very similar mean scores to IPDASi and high correlation

  11. DEVELOPMENT OF TECHNOLOGY OF PRODUCTION OF COLD-SHAPED REINFORCING STEEL ACCORDING TO THE AUSTRIAN STANDARD ONORM В 4200

    Directory of Open Access Journals (Sweden)

    S. N. Kolos

    2008-01-01

    Full Text Available It is shown that the developed technology of melting, pouring, rolling allowed to receive cold-shaped reinforcing steel, corresponding to the requirements of Austrian standard ONORM В 4200. 

  12. Supporting daily activities and indoor travel of persons with moderate Alzheimer's disease through standard technology resources.

    Science.gov (United States)

    Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; Renna, Caterina; Ventrella, Marilisa; Pinto, Katia; Minervini, Mauro G; Oliva, Doretta; Groeneweg, Jop

    2013-08-01

    These two studies were aimed at evaluating standard technology resources for supporting activity and travel among patients with moderate Alzheimer's disease. Specifically, Study I assessed a pictorial instruction program relying on the use of a portable computer and a commercially available and inexpensive video editing software for supporting the performance of daily activities with three patients. Study II assessed the indoor travel performance of four patients (i.e., the three involved in Study I and a fourth patient with no previous research exposure) using a commercially available, basic doorbell system with sound and light cues. The percentages of correct activity steps obtained with the instruction program used in Study I were relatively high and largely similar to the percentages reported in previous studies using more sophisticated technology. During Study II, the percentages of correct travels of two patients matched the data of the most successful patients involved in previous studies with more sophisticated technology. The percentages of the other two patients tended to be lower than those obtained previously, but were still practically relevant. The implications of the results of the two studies and a number of issues for new research are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. The strategic use of standardized information exchange technology in a university health system.

    Science.gov (United States)

    Cheng, Po-Hsun; Chen, Heng-Shuen; Lai, Feipei; Lai, Jin-Shin

    2010-04-01

    This article illustrates a Web-based health information system that is comprised of specific information exchange standards related to health information for healthcare services in National Taiwan University Health System. Through multidisciplinary teamwork, medical and informatics experts collaborated and studied on system scope definition, standard selection challenges, system implementation barriers, system management outcomes, and further expandability of other systems. After user requirement analysis and prototyping, from 2005 to 2008, an online clinical decision support system with multiple functions of reminding and information push was implemented. It was to replace its original legacy systems and serve among the main hospital and three branches of 180-200 clinics and 7,500-8,000 patient visits per day. To evaluate the effectiveness of this system, user surveys were performed, which revealed that the average score of user satisfaction increased from 2.80 to 3.18 on a 4-point scale. Among the items, especially e-learning for training service, courtesy communications for system requests, and courtesy communications for system operations showed statistically significant improvement. From this study, the authors concluded that standardized information exchange technologies can be used to create a brand new enterprise value and steadily obtain more competitive advantages for a prestige healthcare system.

  14. Multifunctional silicon-based light emitting device in standard complementary metal-oxide-semiconductor technology

    Institute of Scientific and Technical Information of China (English)

    Wang Wei; Huang Bei-Ju; Dong Zan; Chen Hong-Da

    2011-01-01

    A three-terminal silicon-based light emitting device is proposed and fabricated in standard 0.35μm complementary metal-oxide-semiconductor technology. This device is capable of versatile working modes: it can emit visible to near infra-red (NIR) light (the spectrum ranges from 500 nm to 1000 nm) in reverse bias avalanche breakdown mode with working voltage between 8.35 V-12 V and emit NIR light (the spectrum ranges from 900 nm to 1300 nm) in the forward injection mode with working voltage below 2 V. An apparent modulation effect on the light intensity from the polysilicon gate is observed in the forward injection mode. Furthermore, when the gate oxide is broken down, NIR light is emitted from the polysilicon/oxide/silicon structure. Optoelectronic characteristics of the device working in different modes are measured and compared. The mechanisms behind these different emissions are explored.

  15. A low-power cryogenic analog to digital converter in standard CMOS technology

    Science.gov (United States)

    Zhao, Hongliang; Liu, Xinghui

    2013-05-01

    This paper presents a cryogenic successive approximation register (SAR) based analog to digital converter (ADC) in standard 0.35 μm complementary metal oxide semiconductor (CMOS) technology that functions from 300 K (room temperature) down to 20 K. It has been designed to operate in low temperature mid- and far-infrared imaging systems. In order to ensure the circuit performance at the extreme temperatures, a dedicated integral-based comparator architecture is employed. SPICE models have been developed for circuit simulation at 20 K. At 20 K, the experimental results exhibit that the ADC achieves 1.6 LSB maximum differential nonlinearity (DNL), 1.7 LSB maximum integral nonlinearity (INL), and 10.4 effective number of bits (ENOB) at 100 kS/s sampling rate with a current consumption of 75 μA from a 3.3 V supply.

  16. Considerations on Configurable Multi-Standard Antennas for Mobile Terminals Realized in LTCC Technology

    Directory of Open Access Journals (Sweden)

    M. Arnold

    2009-12-01

    Full Text Available This paper is an extended version of a paper presented at the EuCAP 2009 conference [1]. We present part of a long term research project that aims on designing a (re-configurable multi-standard antenna element for 4G (4th Generation mobile terminals based on LTCC (Low Temperature Co-fired Ceramic technology. The antenna itself is a coupling element [2] that efficiently excites the chassis of the mobile terminal to radiate as an entire antenna. Coupling is optimized by a reactive tuning circuit. Several of these tuning circuits are realized in a single LTCC component and can be multiplexed to the antenna by a SPnT (Single Pole n Thru antenna switch integrated into the LTCC component. The coils and capacitor in the LTCC component are configurable on the top-layer of the component. Thus, the component is configurable according to different mobile terminal chassis configurations and multiple bands.

  17. Surveying Wearable Human Assistive Technology for Life and Safety Critical Applications: Standards, Challenges and Opportunities

    Directory of Open Access Journals (Sweden)

    Muhammad Mahtab Alam

    2014-05-01

    Full Text Available In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people’s safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

  18. Surveying wearable human assistive technology for life and safety critical applications: standards, challenges and opportunities.

    Science.gov (United States)

    Alam, Muhammad Mahtab; Ben Hamida, Elyes

    2014-05-23

    In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

  19. Technology and Curriculum Standards: How Well Do Internet-Based Learning Games Support Common Core Standards for Mathematics?

    Science.gov (United States)

    Bingham, Teri; Ray, Jan

    2013-01-01

    In an effort to keep up with the new generation of digital learners, educators are integrating multiple forms of technology into their teaching, including online learning game applications. The purpose of this study was to determine the degree to which internet-based learning game applications selected by preservice teachers were aligned with the…

  20. Technology standards battles and networks during the technology life cycle: The battle between HD DVD and Blu-ray

    NARCIS (Netherlands)

    Den Hartigh, E.; Ortt, R.; Van de Kaa, G.; Stolwijk, C.

    2009-01-01

    In this article we explore the changes in the structure and composition of networks supporting technologies during the phases of the technology life cycle. We conceptualize the technology life cycle phases by integrating two existing frameworks of Ortt and Schoormans (2004) and Suarez (2004). Based

  1. Leveraging Open Standards and Technologies to Enhance Community Access to Earth Science Lidar Data

    Science.gov (United States)

    Crosby, C. J.; Nandigam, V.; Krishnan, S.; Cowart, C.; Baru, C.; Arrowsmith, R.

    2011-12-01

    Lidar (Light Detection and Ranging) data, collected from space, airborne and terrestrial platforms, have emerged as an invaluable tool for a variety of Earth science applications ranging from ice sheet monitoring to modeling of earth surface processes. However, lidar present a unique suite of challenges from the perspective of building cyberinfrastructure systems that enable the scientific community to access these valuable research datasets. Lidar data are typically characterized by millions to billions of individual measurements of x,y,z position plus attributes; these "raw" data are also often accompanied by derived raster products and are frequently terabytes in size. As a relatively new and rapidly evolving data collection technology, relevant open data standards and software projects are immature compared to those for other remote sensing platforms. The NSF-funded OpenTopography Facility project has developed an online lidar data access and processing system that co-locates data with on-demand processing tools to enable users to access both raw point cloud data as well as custom derived products and visualizations. OpenTopography is built on a Service Oriented Architecture (SOA) in which applications and data resources are deployed as standards compliant (XML and SOAP) Web services with the open source Opal Toolkit. To develop the underlying applications for data access, filtering and conversion, and various processing tasks, OpenTopography has heavily leveraged existing open source software efforts for both lidar and raster data. Operating on the de facto LAS binary point cloud format (maintained by ASPRS), open source libLAS and LASlib libraries provide OpenTopography data ingestion, query and translation capabilities. Similarly, raster data manipulation is performed through a suite of services built on the Geospatial Data Abstraction Library (GDAL). OpenTopography has also developed our own algorithm for high-performance gridding of lidar point cloud data

  2. A new approach to standardize multicenter studies: mobile lab technology for the German Environmental Specimen Bank.

    Science.gov (United States)

    Lermen, Dominik; Schmitt, Daniel; Bartel-Steinbach, Martina; Schröter-Kermani, Christa; Kolossa-Gehring, Marike; von Briesen, Hagen; Zimmermann, Heiko

    2014-01-01

    Technical progress has simplified tasks in lab diagnosis and improved quality of test results. Errors occurring during the pre-analytical phase have more negative impact on the quality of test results than errors encountered during the total analytical process. Different infrastructures of sampling sites can highly influence the quality of samples and therewith of analytical results. Annually the German Environmental Specimen Bank (ESB) collects, characterizes, and stores blood, plasma, and urine samples of 120-150 volunteers each on four different sampling sites in Germany. Overarching goal is to investigate the exposure to environmental pollutants of non-occupational exposed young adults combining human biomonitoring with questionnaire data. We investigated the requirements of the study and the possibility to realize a highly standardized sampling procedure on a mobile platform in order to increase the required quality of the pre-analytical phase. The results lead to the development of a mobile epidemiologic laboratory (epiLab) in the project "Labor der Zukunft" (future's lab technology). This laboratory includes a 14.7 m(2) reception area to record medical history and exposure-relevant behavior, a 21.1 m(2) examination room to record dental fillings and for blood withdrawal, a 15.5 m(2) biological safety level 2 laboratory to process and analyze samples on site including a 2.8 m(2) personnel lock and a 3.6 m2 cryofacility to immediately freeze samples. Frozen samples can be transferred to their final destination within the vehicle without breaking the cold chain. To our knowledge, we herewith describe for the first time the implementation of a biological safety laboratory (BSL) 2 lab and an epidemiologic unit on a single mobile platform. Since 2013 we have been collecting up to 15.000 individual human samples annually under highly standardized conditions using the mobile laboratory. Characterized and free of alterations they are kept ready for retrospective

  3. A new approach to standardize multicenter studies: mobile lab technology for the German Environmental Specimen Bank.

    Directory of Open Access Journals (Sweden)

    Dominik Lermen

    Full Text Available Technical progress has simplified tasks in lab diagnosis and improved quality of test results. Errors occurring during the pre-analytical phase have more negative impact on the quality of test results than errors encountered during the total analytical process. Different infrastructures of sampling sites can highly influence the quality of samples and therewith of analytical results. Annually the German Environmental Specimen Bank (ESB collects, characterizes, and stores blood, plasma, and urine samples of 120-150 volunteers each on four different sampling sites in Germany. Overarching goal is to investigate the exposure to environmental pollutants of non-occupational exposed young adults combining human biomonitoring with questionnaire data. We investigated the requirements of the study and the possibility to realize a highly standardized sampling procedure on a mobile platform in order to increase the required quality of the pre-analytical phase. The results lead to the development of a mobile epidemiologic laboratory (epiLab in the project "Labor der Zukunft" (future's lab technology. This laboratory includes a 14.7 m(2 reception area to record medical history and exposure-relevant behavior, a 21.1 m(2 examination room to record dental fillings and for blood withdrawal, a 15.5 m(2 biological safety level 2 laboratory to process and analyze samples on site including a 2.8 m(2 personnel lock and a 3.6 m2 cryofacility to immediately freeze samples. Frozen samples can be transferred to their final destination within the vehicle without breaking the cold chain. To our knowledge, we herewith describe for the first time the implementation of a biological safety laboratory (BSL 2 lab and an epidemiologic unit on a single mobile platform. Since 2013 we have been collecting up to 15.000 individual human samples annually under highly standardized conditions using the mobile laboratory. Characterized and free of alterations they are kept ready for

  4. Science and Math Lesson Plans to Meet the Ohio Revised Science Standards and the Next Generation of Standards for Today; Technology (Excel

    Directory of Open Access Journals (Sweden)

    Suzanne Lunsford

    2015-02-01

    Full Text Available Pre-service teachers (K-12 developed and taught lesson plans that met the state and national science and technology standards by integrating Excel and PowerPoint into their lesson. A sample of 74 pre-service teachers in our science education program were required to integrate technology (Excel as they developed science and math lesson plans with graphing as a requirement. These students took pre-test and post-test (n=74 to determine their understanding of Excel in relation to the need of current technology for todays' science classroom. The test results showed that students obtained content gains in Excel graphing in all the inquiry-based lab experiments. They also gained experience in developing math skills, inquiry-based science lesson plans, and communication and presentation skills.

  5. TDT in Argentine and Chile: dynamics of power in the process of adoption of the technological standard ISDB-TB

    Directory of Open Access Journals (Sweden)

    Carla RODRÍGUEZ MIRANDA

    2012-02-01

    Full Text Available The article analyses the media policymaking process about the adoption of the technological standard for the digital terrestrial television in Argentine and Chile. The explorative and descriptive study inquires about the tensions, articulations and dynamics of the national and supranational parties (State, broadcasters, lobbies of technical standards and civil society that played in the politic process from the late 90s when the issue of digital television inserted into public agenda until August/September on 2009 when both countries adopted the Japanese- Brazilian technology system.

  6. Seventy Three SGCC Standards on 1000 kV UHV AC Transmission Technology

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Name of Project:73 Standards including Q/GDW 319-2009 1000kV AC Transmission System Overvoltage and Insulation Coordination Guidelines Main Participant Units:State Grid Corporation of China,China Electric Power Research Institute,State Grid Electric Power Research Institute,China Power Engineering Consulting Group Corporation,Communication and Construction Branch of State Grid Corporation,Grid Operation Branch of State Grid Corporation Main Contributors:Liu Zhenya,Shu Yinbiao,Zheng Baosen,Sun Xin,Chen Weijiang,Yu Yongqing,Wang Jianping,Sun Zhusen,Liang Xuming,Guo Jianbo Award Grade:First PrizeBackground Ultra-High Voltage (UHV) transmission is featured by long distance,large capacity,low line loss,and land conservation.Compared with 500 kV EHV transmission system,UHV transmission power can be 4-5 times for the same transmission distance,UHV transmission distance and corridor capacity can be 3 times,but loss of transmission lines can be only one third for the same transmission power.At the end of 2004,State Grid Corporation of China (SGCC) made a proposal to develop the UHV technology and build a strong power grid.

  7. 78 FR 67121 - Request for Nominations for Members To Serve on National Institute of Standards and Technology...

    Science.gov (United States)

    2013-11-08

    ... and Cyber-Physical Systems Program Office, National Institute of Standards and Technology, 100 Bureau.../committee.cfm . For Further Information Contact: Mr. Cuong Nguyen, Smart Grid and Cyber-Physical Systems....sokol@nist.gov . Committee Information The ISPAB was originally chartered as the Computer System...

  8. A first single-photon avalanche diode fabricated in standard SOI CMOS technology with a full characterization of the device

    NARCIS (Netherlands)

    Lee, M.J.; Sun, P.; Charbon, E.

    2015-01-01

    This paper reports on the first implementation of a single-photon avalanche diode (SPAD) in standard silicon on insulator (SOI) complementary metal-oxide-semiconductor (CMOS) technology. The SPAD is realized in a circular shape, and it is based on a P+/N-well junction along with a P-well guard-ring

  9. E-learning as a technological tool to meet the requirements of occupational standards in training of it specialists

    Science.gov (United States)

    Tokareva, N. A.; Tyatyushkina, O. Y.; Cheremisina, E. N.

    2016-09-01

    We discuss issues of updating educational programs to meet requirements of the labor market and occupational standards of IT industry. We suggest the technology of e-learning that utilizes an open educational resource to provide the employers' participation in the development of educational content and the intensification of practical training.

  10. The Making of a History Standards Wiki: "Covering", "Uncovering", and "Discovering" Curriculum Frameworks Using a Highly Interactive Technology

    Science.gov (United States)

    Maloy, Robert W.; Poirier, Michelle; Smith, Hilary K.; Edwards, Sharon A.

    2010-01-01

    This article explores using a wiki, one of the newest forms of interactive computer-based technology, as a resource for teaching the Massachusetts K-12 History and Social Science Curriculum Framework, a set of state-mandated learning standards. Wikis are web pages that can be easily edited by multiple authors. They invite active involvement by…

  11. China will speed up the establishment of the standard system on information industry technology

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ The supporting function of standards and intellectual property becomes more and more prominent to the development of information industry. To back up the development of autonomous standards, China will speed up the construction of technical standards system based on technical innovation.

  12. 25 CFR 542.16 - What are the minimum internal control standards for information technology?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for... INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.16 What are the minimum internal control... to adhere to tribal internal control standards applicable to the goods and services the vendor...

  13. Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI transport layer standards; Amendment 1: NCMS Management; Technical Corrigendum 1

    CERN Document Server

    International Organization for Standardization. Geneva

    1994-01-01

    Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI transport layer standards; Amendment 1: NCMS Management; Technical Corrigendum 1

  14. Existing and Past Methods of Test and Rating Standards Related to Integrated Heat Pump Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Reedy, Wayne R. [Sentech, Inc.

    2010-07-01

    This report evaluates existing and past US methods of test and rating standards related to electrically operated air, water, and ground source air conditioners and heat pumps, 65,000 Btu/hr and under in capacity, that potentiality incorporate a potable water heating function. Two AHRI (formerly ARI) standards and three DOE waivers were identified as directly related. Six other AHRI standards related to the test and rating of base units were identified as of interest, as they would form the basis of any new comprehensive test procedure. Numerous other AHRI and ASHRAE component test standards were also identified as perhaps being of help in developing a comprehensive test procedure.

  15. 3D Technology Selection for a Virtual Learning Environment by Blending ISO 9126 Standard and AHP

    Science.gov (United States)

    Cetin, Aydin; Guler, Inan

    2011-01-01

    Web3D presents many opportunities for learners in a virtual world or virtual environment over the web. This is a great opportunity for open-distance education institutions to benefit from web3d technologies to create courses with interactive 3d materials. There are many open source and commercial products offering 3d technologies over the web…

  16. National Technology Standards for K-12 Schools: A Case Study of Unresolved Issues in Public Relations

    Science.gov (United States)

    Mullen, Carol A.; Kealy, William A.; Sullivan, Ashley

    2004-01-01

    This article addresses an important need--the dissemination of information relating to technology as a public relations tool--and the associated exigency for administrator and teacher technology training. Specifically, we identify the increased expectations for the performance of school leaders and teachers, as well as unresolved issues in public…

  17. 3D Technology Selection for a Virtual Learning Environment by Blending ISO 9126 Standard and AHP

    Science.gov (United States)

    Cetin, Aydin; Guler, Inan

    2011-01-01

    Web3D presents many opportunities for learners in a virtual world or virtual environment over the web. This is a great opportunity for open-distance education institutions to benefit from web3d technologies to create courses with interactive 3d materials. There are many open source and commercial products offering 3d technologies over the web…

  18. A new single-photon avalanche diode in 90nm standard CMOS technology

    NARCIS (Netherlands)

    Karami, M.A.; Gersbach, M.; Charbon, E.

    2010-01-01

    A single-photon avalanche diode (SPAD) fabricated in a 90nm standard CMOS process is reported. The detector comprises an octagonal multiplication region and a guard ring to prevent premature edge breakdown using exclusively standard layers. The proposed structure is the result of a systematic study

  19. Fundamentals of automotive and engine technology standard drives, hybrid drives, brakes, safety systems

    CERN Document Server

    2014-01-01

    Hybrid drives and the operation of hybrid vehicles are characteristic of contemporary automotive technology. Together with the electronic driver assistant systems, hybrid technology is of the greatest importance and both cannot be ignored by today’s car drivers. This technical reference book provides the reader with a firsthand comprehensive description of significant components of automotive technology. All texts are complemented by numerous detailed illustrations. Contents History of the automobile.- History of the Diesel engine.- Areas of use for Diesel engines.- Basic principles of the Diesel engine.- Basic principles of Diesel fuel-injection.- Basic principles of the gasoline engine.- Inductive ignition system.- Transmissions for motor vehicles.- Motor vehicle safety.- Basic principles of vehicle dynamics.- Car braking systems.- Vehicle electrical systems.- Overview of electrical and electronic systems in the vehicle.- Control of gasoline engines.- Control of Diesel engines.- Lighting technology.- Elec...

  20. A brain-computer interface as input channel for a standard assistive technology software.

    Science.gov (United States)

    Zickler, Claudia; Riccio, Angela; Leotta, Francesco; Hillian-Tress, Sandra; Halder, Sebastian; Holz, Elisa; Staiger-Sälzer, Pit; Hoogerwerf, Evert-Jan; Desideri, Lorenzo; Mattia, Donatella; Kübler, Andrea

    2011-10-01

    Recently brain-computer interface (BCI) control was integrated into the commercial assistive technology product QualiWORLD (QualiLife Inc., Paradiso-Lugano, CH). Usability of the first prototype was evaluated in terms of effectiveness (accuracy), efficiency (information transfer rate and subjective workload/NASA Task Load Index) and user satisfaction (Quebec User Evaluation of Satisfaction with assistive Technology, QUEST 2.0) by four end-users with severe disabilities. Three assistive technology experts evaluated the device from a third person perspective. The results revealed high performance levels in communication and internet tasks. Users and assistive technology experts were quite satisfied with the device. However, none could imagine using the device in daily life without improvements. Main obstacles were the EEG-cap and low speed.

  1. Assessing the quality of decision support technologies using the International Patient Decision Aid Standards instrument (IPDASi).

    NARCIS (Netherlands)

    Elwyn, G.; O'Connor, A.M.; Bennett, C.; Newcombe, R.G.; Politi, M.; Durand, M.A.; Drake, E.; Joseph-Williams, N.; Khangura, S.; Saarimaki, A.; Sivell, S.; Stiel, M.; Bernstein, S.J.; Col, N.; Coulter, A.; Eden, K.; Harter, M.; Rovner, M.H.; Moumjid, N.; Stacey, D.; Thomson, R.; Whelan, T.; Weijden, G.D.E.M. van der; Edwards, A.

    2009-01-01

    OBJECTIVES: To describe the development, validation and inter-rater reliability of an instrument to measure the quality of patient decision support technologies (decision aids). DESIGN: Scale development study, involving construct, item and scale development, validation and reliability testing. SETT

  2. In vitro comparison of a novel facilitated ultrasound targeting technology vs standard technique for percutaneous renal biopsy.

    Science.gov (United States)

    Menhadji, Ashleigh; Nguyen, Vien; Cho, Jane; Chu, Ringo; Osann, Kathyrn; Bucur, Philip; Patel, Puja; Lusch, Achim; McDougall, Elspeth; Landman, Jaime

    2013-09-01

    To improve the understanding of the epidemiology of renal cortical neoplasms through pretreatment biopsy, we evaluated a facilitated ultrasound targeting (FUT) technology. The technology allows a needle to be passed through the transducer probe and guided along a virtual dotted line on the monitor. We compared the FUT with standard percutaneous biopsy (PB) technique. Forty-eight participants with various levels of training were recruited. Participants performed ultrasound-guided biopsies on phantom models using FUT and the standard biopsy technique in a randomized sequence. The phantom models consisted of pimento olives embedded in an opaque mold of Metamucil and Knox gelatin. Patients were given up to 10 attempts to achieve 3 complete specimens from the olives. Patients rated each biopsy technique. Results were stratified by level of experience. The mean time to obtain 3 complete biopsy specimens was significantly faster for FUT compared with the standard technique (140 seconds vs 246 seconds, P = .0001). The mean number of attempts needed to obtain 3 specimens was significantly less with FUT compared with the standard technique (4.3 vs 5.6 attempts, P = .0007). Patients reported that FUT was significantly easier to use compared with the standard technique (P = .0005). No significant order effect was observed. In this in vitro comparison, FUT increased the efficiency and efficacy of PB for users of all experience levels. FUT may allow urologists with limited PB experience to perform the procedure reliably and easily. Clinical evaluation of this technology is actively in progress. Copyright © 2013 Elsevier Inc. All rights reserved.

  3. 75 FR 76397 - Effectiveness of Federal Agency Participation in Standardization in Select Technology Sectors for...

    Science.gov (United States)

    2010-12-08

    ... comments that parties may submit. Comments containing references, studies, research, and other empirical...-setting processes managed and coordinated? Is there a strategic plan that identifies the standards needs...

  4. Utilizing GIS to Examine the Relationship Between State Renewable Portfolio Standards and the Adoption of Renewable Energy Technologies

    Directory of Open Access Journals (Sweden)

    Chelsea Schelly

    2013-12-01

    Full Text Available In the United States, there is no comprehensive energy policy at the federal level. To address issues as diverse as climate change, energy security, and economic development, individual states have increasingly implemented Renewable Portfolio Standards (RPSs, which mandate that utility providers include a specified amount of electricity from renewable energy sources in their total energy portfolios. Some states have included incentives for individual energy technologies in their RPS, such as solar electric (also called photovoltaic or PV technology. Here, we use GIS to visualize adoption of RPSs and electricity generation from renewable energy sources in the US and examine changes in renewable electricity and solar electric generation over time with the goal of informing future policies aimed at promoting the adoption of renewable energy technologies.

  5. Technical Standards for Command and Control Information Systems (CCISs) and Information Technology

    Science.gov (United States)

    1994-02-01

    Nijssen Information Analysis Method (NIAM) into Integrated Computer-Aided Manufacturing (ICAM) Definition Language Type I Extended ( IDEFIX ). [Ref. SC21...of US Air Force studies in the late 1970s. The data modelling language IDEFIX , developed by Hughes Aircraft and the D. Appleton Company, provides an...for the basis of future data standardization. IDEFIX has been adopted as the standard for presenting data models. IDEFIX was used to develop the Army

  6. Towards the development of consistent and unambiguous financial accounting standards using ontology technologies

    CSIR Research Space (South Africa)

    Gerber, MC

    2011-11-01

    Full Text Available frame, interpret this data and then to report the results to the different users of the financial statements (Edwards 1989; IFRS 2011). Information provided in financial statements is compiled using an interpretation of accounting data gathered... using the financial statements (Camfferman & Zeff 2009; IFRS 2011). The unenviable task of setting financial accounting standards rests on the shoulders of standard setters. Across all continents and in most countries, financial accounting...

  7. Does it help teaching? Instructors’ perceptions of a technology enhanced standards-based educational program

    Directory of Open Access Journals (Sweden)

    Hasan Çakır, Barbara A. Bichelmeyer, Thomas Duffy, Alan Dennis, JoAnne Bunnage

    2009-01-01

    Full Text Available Recent accountability movements in the education world gave rise to standards-based curriculum, which provides a teaching and learning environment with high quality instructional materials. An example to such learning environment is Cisco Certified Network Associate (CCNA program. This study investigates high school teachers’ perceptions and experiences of CCNA program in their classrooms. 357 high school teachers in the United States who teach in the CCNA program completed an online survey measuring their perceptions about standards-based curriculum and testing. The results show that teachers generally accept standards-based curriculum and testing as a teaching tool, spend less time on student feedback and would like to see some features of the curriculum applied to other regular high school subjects such as mathematics and science.

  8. Does it help teaching? Instructors’ perceptions of a technology enhanced standards-based educational program

    Directory of Open Access Journals (Sweden)

    Hasan Çakır

    2009-12-01

    Full Text Available Recent accountability movements in the education world gave rise to standards-based curriculum, which provides a teaching and learning environment with high quality instructional materials. An example to such learning environment is Cisco Certified Network Associate (CCNA program. This study investigates high school teachers’ perceptions and experiences of CCNA program in their classrooms. 357 high school teachers in the United States who teach in the CCNA program completed an online survey measuring their perceptions about standards-based curriculum and testing. The results show that teachers generally accept standards-based curriculum and testing as a teaching tool, spend less time on student feedback and would like to see some features of the curriculum applied to other regular high school subjects such as mathematics and science.

  9. Radiation-based quantitative bioimaging at the national institute of standards and technology

    Directory of Open Access Journals (Sweden)

    Karam Lisa

    2009-01-01

    Full Text Available Building on a long history of providing physical measurements and standards for medical x rays and nuclear medicine radionuclides, the laboratory has expanded its focus to better support the extensive use of medical physics in the United States today, providing confidence in key results needed for drug and device development and marketing, therapy planning and efficacy and disease screening. In particular, to support more quantitative medical imaging, this laboratory has implemented a program to provide key measurement infrastructure to support radiation-based imaging through developing standard, benchmark phantoms, which contain radioactive sources calibrated to national measurement standards, to allow more quantitative imaging through traceable instrument calibration for clinical trials or patient management. Working closely with colleagues at the National Institutes of Health, Rensselaer Polytechnic Institute, the Food and Drug Administration and Cornell University, this laboratory has taken the initial steps in developing phantoms, and the protocols to use them, for more accurate calibration of positron emission tomography (PET or single-photon emission computed tomography (SPECT cameras, including recently standardizing 68 Ge. X-ray measurements of the laboratory′s recently developed small, resilient and inexpensive length standard phantom have shown the potential usefulness of such a "pocket" phantom for patient-based calibration of computed tomography (alone or with PET systems. The ability to calibrate diagnostic imaging tools in a way that is traceable to national standards will lead to a more quantitative approach; both physician and patient benefit from increased accuracy in treatment planning, as well as increased safety for the patient.

  10. 75 FR 44589 - Health Information Technology: Initial Set of Standards, Implementation Specifications, and...

    Science.gov (United States)

    2010-07-28

    ... Representational state transfer RFA Regulatory Flexibility Act SNOMED-CT Systematized Nomenclature of Medicine... Accountability Act of 1996 (HIPAA) Privacy Rule Accounting of Disclosures Regulation under the HITECH Act... adopted ICD-9 or SNOMED- CT to provide that structure. As a result, Certified EHR Technology must...

  11. Producing Television Commercials in High School Technology Education: An Authentic Standards-Based Project

    Science.gov (United States)

    Loveland, Thomas; Harrison, Henry L., III

    2008-01-01

    As more school administrators learn ways of promoting their schools to the public, the push for developing television production courses will likely increase. This article introduces the reader to the curricular and pedagogical foundations of television production technology. The authors discuss how to make informed decisions when creating…

  12. [Planning of working conditions and tasks in creating optimal standards of technology in coal mines].

    Science.gov (United States)

    Meniaĭlo, N I; Tyshlek, E G

    1989-01-01

    During the next 20 years normalization of occupational factors at Donbas mines should be ensured by technical reconstruction of mines on the basis of the development of new technological circuits, automatization and mechanization means, the means of collective protection, physiologic labour rationalization.

  13. Russia Develops Educational Standards for Higher Vocational Training in the Technology and Entrepreneurship Specialty

    Science.gov (United States)

    Karatchev, A. A.; Lavrov, N. N.

    2004-01-01

    This article offers insight into what Russian educators are facing on a daily basis as they try and find and pursue the best course of action as they attempt to create a curriculum that will address the major needs of Russian society now and in the immediate future. It presents issues related to training teachers of technology and entrepreneurship…

  14. Specifics of the technical and technological ergonomy in the course of labour training (normative standards)

    OpenAIRE

    Klinkov, Georgi

    2014-01-01

    Ergonomy is defined as “a complex science which studies the human being and his/her labour by exploring the technical aspects of the connection between the workers, the material environment and the interaction between them on an informational and technical level”. The main functions are related to the design, technology of crafting, application and the development.

  15. Producing Television Commercials in High School Technology Education: An Authentic Standards-Based Project

    Science.gov (United States)

    Loveland, Thomas; Harrison, Henry L., III

    2008-01-01

    As more school administrators learn ways of promoting their schools to the public, the push for developing television production courses will likely increase. This article introduces the reader to the curricular and pedagogical foundations of television production technology. The authors discuss how to make informed decisions when creating…

  16. DARPA Antibody Technology Program Standardized Test Bed for Antibody Characterization: Characterization of an MS2 Human IgG Antibody Produced by AnaptysBio, Inc.

    Science.gov (United States)

    2016-02-01

    ECBC-TR-1339 DARPA ANTIBODY TECHNOLOGY PROGRAM STANDARDIZED TEST BED FOR ANTIBODY...CHARACTERIZATION: CHARACTERIZATION OF AN MS2 HUMAN IGG ANTIBODY PRODUCED BY ANAPTYSBIO, INC. DARPA ATP Standardized Test Bed for Antibody...Characterization: Characterization of an MS2 human IgG antibody produced by AnaptysBio DARPA ATP Standardized Test Bed for Antibody

  17. 數位學習標準與SCORM的發展 | Learning Technology Standards and SCORM

    Directory of Open Access Journals (Sweden)

    徐文杰、林沛傑 Wen-Jye Hsu、Pe-Chieh Lin

    2003-04-01

    然值得我們觀察。

    Common standards in learning technology will have a profound impact on the relationships among educators, learners, institutions, venders and publishers. Standards help to ensure ReusabilityAccessibilityDurabilityInteroperabilityAdaptabilityAffordability and Manageability will protect e-Learning investment.  The SCORM of ADL ( Advanced Distributed Learning provides a foundational reference model upon which anyone can develop models of

  18. Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

    Science.gov (United States)

    2013-10-01

    of data and creation of vital signs alarms by the ICE supervisor apps; and (4) Sedation during Endoscopy , demonstrating safety and effectiveness...standards development organizations, and regulatory agencies) resulted in industry consensus on the ICE approach as desirable for the Pre-IDE submission

  19. Methodology and Technology for Developing Multi-Component Chinese Medicine-Standardization and Resourcing

    Institute of Scientific and Technical Information of China (English)

    LIANG XinMiao; ZHANG XiuLi; XUE XingYa; FENG JiaTao

    2009-01-01

    @@ Presently,Traditional Chinese Medicine (TCM) is an important resource to treat many diseases,which has a long history in China,and is very complicated in chemical composition and pharmacology.Therefore,modernization of TCM is very necessary,including standardization,resourcing,quality control and research on chemical composition and pharmacology.

  20. 60-GHz array antenna with standard CMOS technology on Schott Borofloat

    Science.gov (United States)

    Jun, Luo; Yan, Wang; Ruifeng, Yue

    2013-11-01

    This design is presented of a 2 × 2 planar array, with a half-wave dipole antenna to be its element, on a new substrate material, Schott Borofloat, with CMOS technology in the 60 GHz band. In the proposed structure, all the designs are based on the CMOS technology and similar performance could be achieved with the same size in contrast to the design on low-temperature co-fired ceramic (LTCC). This could lead to the improving of the compatibility with the CMOS IC process, the design cost and the design precision which is restricted in the LTCC process. The simulated -10 dB bandwidth of the array is from 58 to 64 GHz. A peak gain of 9.4 dBi is achieved. Good agreement on return loss is achieved between simulations and measurements.

  1. OneGeology Web Services and Portal as a global geological SDI - latest standards and technology

    Science.gov (United States)

    Duffy, Tim; Tellez-Arenas, Agnes

    2014-05-01

    The global coverage of OneGeology Web Services (www.onegeology.org and portal.onegeology.org) achieved since 2007 from the 120 participating geological surveys will be reviewed and issues arising discussed. Recent enhancements to the OneGeology Web Services capabilities will be covered including new up to 5 star service accreditation scheme utilising the ISO/OGC Web Mapping Service standard version 1.3, core ISO 19115 metadata additions and Version 2.0 Web Feature Services (WFS) serving the new IUGS-CGI GeoSciML V3.2 geological web data exchange language standard (http://www.geosciml.org/) with its associated 30+ IUGS-CGI available vocabularies (http://resource.geosciml.org/ and http://srvgeosciml.brgm.fr/eXist2010/brgm/client.html). Use of the CGI simpelithology and timescale dictionaries now allow those who wish to do so to offer data harmonisation to query their GeoSciML 3.2 based Web Feature Services and their GeoSciML_Portrayal V2.0.1 (http://www.geosciml.org/) Web Map Services in the OneGeology portal (http://portal.onegeology.org). Contributing to OneGeology involves offering to serve ideally 1:1000,000 scale geological data (in practice any scale now is warmly welcomed) as an OGC (Open Geospatial Consortium) standard based WMS (Web Mapping Service) service from an available WWW server. This may either be hosted within the Geological Survey or a neighbouring, regional or elsewhere institution that offers to serve that data for them i.e. offers to help technically by providing the web serving IT infrastructure as a 'buddy'. OneGeology is a standards focussed Spatial Data Infrastructure (SDI) and works to ensure that these standards work together and it is now possible for European Geological Surveys to register their INSPIRE web services within the OneGeology SDI (e.g. see http://www.geosciml.org/geosciml/3.2/documentation/cookbook/INSPIRE_GeoSciML_Cookbook%20_1.0.pdf). The Onegeology portal (http://portal.onegeology.org) is the first port of call for anyone

  2. Standardized UXO Technology Demonstration Site, Blind Grid Scoring Record No. 671

    Science.gov (United States)

    2005-09-01

    Overbay, Larry; Robitaille, George The Standardized UXO Tecnology Demonstration Site Scoring Committee 7. PERFORM ING ORGANIZATION NAM E(S) AND ADDRESS(ES...98) Prescribed by AN SI Std. Z39.18 The public report ing burden for this collect ion of information is est imated to average 1 hour per response...revi ewing the collect ion of informat ion. Send comments regarding this burden est imate or any other aspect of this collect ion of information

  3. Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

    Science.gov (United States)

    2016-10-01

    Data Logger standard. In support of this project, we set up a web-based project site (see Figure 1) and Dr. Goldman chaired virtual meetings...Gaithersburg, MD  November 14-17 2015 – AMIA Conference, San Francisco, CA; Nursing Informatics HIT Maker Faire featured OpenICE  December 1 2015...Patient Safety: Making Medical Device ‘Plug-and-Play’ Interoperability a Reality ,” Patient Safety & Quality Healthcare 7:1, 26-30, Jan-Feb 2010. 25

  4. Restructuring an EHR system and the Medical Markup Language (MML) standard to improve interoperability by archetype technology.

    Science.gov (United States)

    Kobayashi, Shinji; Kume, Naoto; Yoshihara, Hiroyuki

    2015-01-01

    In 2001, we developed an EHR system for regional healthcare information inter-exchange and to provide individual patient data to patients. This system was adopted in three regions in Japan. We also developed a Medical Markup Language (MML) standard for inter- and intra-hospital communications. The system was built on a legacy platform, however, and had not been appropriately maintained or updated to meet clinical requirements. To improve future maintenance costs, we reconstructed the EHR system using archetype technology on the Ruby on Rails platform, and generated MML equivalent forms from archetypes. The system was deployed as a cloud-based system for preliminary use as a regional EHR. The system now has the capability to catch up with new requirements, maintaining semantic interoperability with archetype technology. It is also more flexible than the legacy EHR system.

  5. Active High Power Conversion Efficiency Rectifier With Built-In Dual-Mode Back Telemetry in Standard CMOS Technology.

    Science.gov (United States)

    Bawa, G; Ghovanloo, M

    2008-09-01

    In this paper, we present an active rectifier with high power conversion efficiency (PCE) implemented in a 0.5- mum 5 V standard CMOS technology with two modes of built-in back telemetry; short- and open-circuit. As a rectifier, it ensures a PCE > 80%, taking advantage of active synchronous rectification technique in the frequency range of 0.125-1 MHz. The built-in complementary back telemetry feature can be utilized in implantable microelectronic devices (IMD), wireless sensors, and radio frequency identification (RFID) applications to reduce the silicon area, increase the data rate, and improve the reading range and robustness in load shift keying (LSK).

  6. A review of performance standards to monitor, evaluate and assess the impact of technology transfer offices

    Directory of Open Access Journals (Sweden)

    Sibongile Gumbi

    2010-07-01

    Full Text Available The conversion of scientific discoveries to new products and processes and their launch onto the market can be a lengthy process. Similarly, it takes many years before the impact of scientific research on society and the economy is realised and a further length of time before its performance can be measured. Higher education and research institutions, and their governments, often make significant investments into intellectual property management and technology transfer activities through legislative and policy development, human resource development, financial allocation and infrastructure improvement. Since returns on such investments are not immediately apparent, it is important to establish a means by which the impact of their efforts can be determined. In this paper, I examined the measures and indicators that could be developed by institutions and their stakeholders in order to monitor, evaluate and determine the impact of research output and outcomes on the market.

  7. Evolution of the NOAA National Weather Service Satellite Broadcast Network (SBN) to Europe's DVB-S satellite communications technology standard

    Science.gov (United States)

    Cragg, Phil; Brockman, William E.

    2006-08-01

    The National Oceanic and Atmospheric Administration's (NOAA) National Weather Service (NWS) uses a commercial Satellite Broadcast Network (SBN) to distribute weather data to the NWS AWIPS workstations and National Centers and to NWS Family of Service Users. Advances in science and technology from NOAA's observing systems, such as remote sensing satellites and NEXRAD radars, and advances in Numeric Weather Prediction have greatly increased the volume of data to be transmitted via the SBN. The NOAA-NWS SBN Evolution Program did a trade study resulting in the selection of Europe's DVB-S communication protocol as the basis for enabling a significant increase in the SBN capacity. The Digital Video Broadcast (DVB) group, started to develop digital TV for Europe through satellite broadcasting, has become the current standard for defining technology for satellite broadcasting of digital data for much of the world. NOAA-NWS implemented the DVB-S with inexpensive, Commercial Off The Shelf receiving equipment. The modernized NOAA-NWS SBN meets current performance goals and provides the basis for continued future expansion with no increase in current communication costs. This paper discusses aspects of the NOAA-NWS decision and the migration to the DVB-S standard for its commercial satellite broadcasts of observations and Numerical Weather Prediction data.

  8. Oil heat venting technology and NFPA standard 31 revision year 2000

    Energy Technology Data Exchange (ETDEWEB)

    Krajewski, R.F. [Brookhaven National Labs., Upton, NY (United States)

    1997-09-01

    The revision of National Fire Protection Association (NFPA) Standard 31 for the year 2000 offers an opportunity to update the Appendix which currently offers recommendations for basic metal relining of masonry chimneys up to and including 25 feet. The paper discusses the proposed update of the existing recommendations to include flexible (rough) metal liners. In addition, the discussion addresses the inclusion of additional information for unlined (non-conforming), lined (conforming to NFPA 211) masonary chimneys, insulated metal chimneys, chimney heights beyond what are now published, as well as power venting both forced and induced draft. Included in the paper is a discussion of the existing Oil Heat Vent Analysis Program (OHVAP Version 3.0) and issues that need resolution to make it a better vent system model.

  9. [Research and implementation of the TLS network transport security technology based on DICOM standard].

    Science.gov (United States)

    Lu, Xiaoqi; Wang, Lei; Zhao, Jianfeng

    2012-02-01

    With the development of medical information, Picture Archiving and Communications System (PACS), Hospital Information System/Radiology Information System(HIS/RIS) and other medical information management system become popular and developed, and interoperability between these systems becomes more frequent. So, these enclosed systems will be open and regionalized by means of network, and this is inevitable. If the trend becomes true, the security of information transmission may be the first problem to be solved. Based on the need for network security, we investigated the Digital Imaging and Communications in Medicine (DICOM) Standard and Transport Layer Security (TLS) Protocol, and implemented the TLS transmission of the DICOM medical information with OpenSSL toolkit and DCMTK toolkit.

  10. Standardization and Digital Enclosure: The Privatization of Standards, Knowledge, and Policy in the Age of Global Information Technology. Part of the Advances in IT Standards and Standardization Research (AISSR) Book Series

    Science.gov (United States)

    Schoechle, Timothy, Ed.

    2009-01-01

    Recent trends have shown increasing privatization of standardization activities under various corporations, trade associations, and consortia, raising significant public policy issues about how the public interest may be represented. This book establishes a framework of analysis for public policy discussion and debate. Discussing topics such as…

  11. Minimal residual disease diagnostics in acute lymphoblastic leukemia: need for sensitive, fast, and standardized technologies.

    Science.gov (United States)

    van Dongen, Jacques J M; van der Velden, Vincent H J; Brüggemann, Monika; Orfao, Alberto

    2015-06-25

    Monitoring of minimal residual disease (MRD) has become routine clinical practice in frontline treatment of virtually all childhood acute lymphoblastic leukemia (ALL) and in many adult ALL patients. MRD diagnostics has proven to be the strongest prognostic factor, allowing for risk group assignment into different treatment arms, ranging from significant treatment reduction to mild or strong intensification. Also in relapsed ALL patients and patients undergoing stem cell transplantation, MRD diagnostics is guiding treatment decisions. This is also why the efficacy of innovative drugs, such as antibodies and small molecules, are currently being evaluated with MRD diagnostics within clinical trials. In fact, MRD measurements might well be used as a surrogate end point, thereby significantly shortening the follow-up. The MRD techniques need to be sensitive (≤10(-4)), broadly applicable, accurate, reliable, fast, and affordable. Thus far, flow cytometry and polymerase chain reaction (PCR) analysis of rearranged immunoglobulin and T-cell receptor genes (allele-specific oligonucleotide [ASO]-PCR) are claimed to meet these criteria, but classical flow cytometry does not reach a solid 10(-4), whereas classical ASO-PCR is time-consuming and labor intensive. Therefore, 2 high-throughput technologies are being explored, ie, high-throughput sequencing and next-generation (multidimensional) flow cytometry, both evaluating millions of sequences or cells, respectively. Each of them has specific advantages and disadvantages.

  12. Using Semantic Web technologies for the generation of domain-specific templates to support clinical study metadata standards.

    Science.gov (United States)

    Jiang, Guoqian; Evans, Julie; Endle, Cory M; Solbrig, Harold R; Chute, Christopher G

    2016-01-01

    The Biomedical Research Integrated Domain Group (BRIDG) model is a formal domain analysis model for protocol-driven biomedical research, and serves as a semantic foundation for application and message development in the standards developing organizations (SDOs). The increasing sophistication and complexity of the BRIDG model requires new approaches to the management and utilization of the underlying semantics to harmonize domain-specific standards. The objective of this study is to develop and evaluate a Semantic Web-based approach that integrates the BRIDG model with ISO 21090 data types to generate domain-specific templates to support clinical study metadata standards development. We developed a template generation and visualization system based on an open source Resource Description Framework (RDF) store backend, a SmartGWT-based web user interface, and a "mind map" based tool for the visualization of generated domain-specific templates. We also developed a RESTful Web Service informed by the Clinical Information Modeling Initiative (CIMI) reference model for access to the generated domain-specific templates. A preliminary usability study is performed and all reviewers (n = 3) had very positive responses for the evaluation questions in terms of the usability and the capability of meeting the system requirements (with the average score of 4.6). Semantic Web technologies provide a scalable infrastructure and have great potential to enable computable semantic interoperability of models in the intersection of health care and clinical research.

  13. Technology development for evaluation of operational quantities and measurement standard in radiation protection

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Si Young; Lee, T. Y.; Kim, J. L.; Kim, B. H.; Chung, K. K.; Lee, J. I.; Park, T. S.; Ha, S. H.; Oh, P. J.; Jun, K. J

    1999-03-01

    A study on the fabrication of a new personal thermo-luminescence dosimeter, which can evaluate the personal dose equivalent H{sub p}(d), has been performed. Optimum conditions for fabrications of a LiF:Mg, Cu, Na, Si TL phosphor powder has been determined and a disc type TL pellet has been fabricated from this TL powder. Another type of CaSO{sub 4}:Dy, Mo TL material has been also fabricated. These two TL materials have shown greater TL sensitivity than the foreign-made commercial TL materials. Mono-energetic florescence X-rays from 8.6 response have been constructed and evaluated for the performance of the purity, air kerma, beam uniformity and distribution,and scattered fraction of X-rays.A free-air ionization chamber for the absolute measurement of air kerma in medium X-ray has been designed and constructed. Experimental results showed that the homemade chamber leaves nothing to be desired, compared with the national standard chambers in other advanced countries. Gas proportional counting system has been designed and constructed for absolute activity measurements of gaseous radionuclides. Unattached fractions of radon progeny were evaluated in the characteristic study on the detection of radon progeny.

  14. 技术标准锁定、创新惰性和技术创新%Technical Standard Lock-in and Innovation Inertia and Technology Innovation

    Institute of Scientific and Technical Information of China (English)

    陶爱萍; 张丹丹

    2013-01-01

    Technical standard lock-in and innovation inertia will hinder technology innovation. Studying the relationship among the three is advantageous to break through technical standard lock-in, overcome innovation inertia, and promote technological innovation. Based on the analysis of the forming mechanism of technology standard lock-in, this article studies the relation between technical standard lock-in and innovation inertia, and between technical standard lock-in and technology innovation. Then this article analyzes the technology innovation dilemma under the two resultant forces of technical standard lock-in and innovation inertia, and the importance of revolutionary innovation at breaking technology standard lock-in and overcoming innovation inertia. Finally the paper gives suggestions on how to break technology standard lock-in based on the case study of Nokia company.%技术标准锁定、创新惰性都会对技术创新产生阻碍作用,研究三者之间的关系有利于突破技术标准锁定、克服创新惰性、促进技术创新.文章在分析技术标准锁定形成机制的基础上,研究技术标准锁定和创新惰性、技术标准锁定和技术创新之间的关系,剖析技术标准锁定、创新惰性两者合力作用下技术创新的困境以及革命式创新对于突破技术标准锁定、克服创新惰性的重要性,最后结合诺基亚公司的案例探索突破技术标准锁定的对策建议.

  15. Golden Ratio-Based and Tapered Diptera Inspired Wings: Their Design and Fabrication Using Standard MEMS Technology

    Institute of Scientific and Technical Information of China (English)

    X. Q. Bao; E. Cattan

    2011-01-01

    This work presents our understanding of insect wings, and the design and micromachining of artificial wings with golden ratio-based and tapered veins. The geometric anisotropy of Leading Edge Veins (LEVs) selected by Diptera has a function able to evade impact. As a Diptera example, the elliptic hollow LEVs of cranefly wings are mechanically and aerodynamically significant. In this paper, an artificial wing was designed to be a fractal structure by mimicking cranefly wings and incorporating cross-veins and discal cell. Standard technologies of Microelectromechanical Systems (MEMS) were employed to materialize the design using the selected material. One SU-8 wing sample, light and stiff enough to be comparable to fresh cranefly wings,was presented. The as-prepared SU-8 wings are faithful to real wings not only in weight and vein pattern, but also in flexural stiffness and mass distribution. Thus our method renders possible mimicking with good fidelity of natural wings with complex geometry and morphology.

  16. On Practical English Teaching in Universities of Technology under the New National Standards for English Major Teaching Quality

    Institute of Scientific and Technical Information of China (English)

    张媛

    2015-01-01

    As an inheritance and a result of development of the English Teaching Syllabus for English Majors, the New National Standards for English Majors Teaching Quality lays a solid foundation for establishing a more effective English major teaching mode since it puts emphasis on cultivation of students' practical ability, comprehensive quality and individual development.Taking into account the current situation and problems of Practical English Teaching in Universities of Science and Technology, this paper attempts to put forward that to clarify the concept of “practical teaching”, to seek for corresponding solutions in the aspects of extracurricular teaching activity, multilevel practical activity, thesis writing and academic research may jointly be an effective way to improve practical English teaching.

  17. Estimating the Value of Utility-Scale Solar Technologies in California Under a 40% Renewable Portfolio Standard (Report Summary) (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Jorgenson, J.; Denholm, P.; Mehos, M.

    2014-06-01

    Concentrating solar power with thermal energy storage (CSP-TES) is a unique source of solar energy in that its output can be shifted over time. The ability of CSP-TES to be a flexible source of generation may be particularly valuable in regions with high overall penetration of solar energy, such as the state of California. California's Renewable Portfolio Standard (RPS) requires the state to increase generation from eligible renewable energy resources to reach 33% of retail electricity sales by 2020. Beyond 2020, California targets a further reduction in greenhouse gas emissions. To help reach this goal, current California governor Jerry Brown has stated that a higher 40% RPS might be reachable in the near term. The levelized cost of energy is generally emphasized when assessing the economic viability of renewable energy systems implemented to achieve the RPS. However, the operational and capacity benefits of such systems are often ignored, which can lead to incorrect economic comparisons between CSP-TES and variable renewable generation technologies such as solar photovoltaics (PV). Here we evaluate a 40% RPS scenario in a California grid model with PV or CSP-TES providing the last 1% of RPS energy. We compare the technical and economic implications of integrating either solar technology under several sensitivities, finding that the ability to displace new conventional thermal generation capacity may be the largest source of value of CSP-TES compared to PV at high solar penetrations.

  18. Estimating the Value of Utility-Scale Solar Technologies in California Under a 40% Renewable Portfolio Standard

    Energy Technology Data Exchange (ETDEWEB)

    Jorgenson, J.; Denholm, P.; Mehos, M.

    2014-05-01

    Concentrating solar power with thermal energy storage (CSP-TES) is a unique source of solar energy in that its output can be shifted over time. The ability of CSP-TES to be a flexible source of generation may be particularly valuable in regions with high overall penetration of solar energy, such as the state of California. California's Renewable Portfolio Standard (RPS) requires the state to increase generation from eligible renewable energy resources to reach 33% of retail electricity sales by 2020. Beyond 2020, California targets a further reduction in greenhouse gas emissions. To help reach this goal, current California governor Jerry Brown has stated that a higher 40% RPS might be reachable in the near term. The levelized cost of energy is generally emphasized when assessing the economic viability of renewable energy systems implemented to achieve the RPS. However, the operational and capacity benefits of such systems are often ignored, which can lead to incorrect economic comparisons between CSP-TES and variable renewable generation technologies such as solar photovoltaics (PV). Here we evaluate a 40% RPS scenario in a California grid model with PV or CSP-TES providing the last 1% of RPS energy. We compare the technical and economic implications of integrating either solar technology under several sensitivities, finding that the ability to displace new conventional thermal generation capacity may be the largest source of value of CSP-TES compared to PV at high solar penetrations.

  19. Are the current attempts at standardization of antiphospholipid antibodies still useful? Emerging technologies signal a shift in direction.

    Science.gov (United States)

    Andreoli, Laura; Rizzini, Silvia; Allegri, Flavio; Meroni, Pierluigi; Tincani, Angela

    2008-06-01

    The pathogenic role of antiphospholipid antibodies (aPL) has been widely established over past years in several experimental models and clinical studies. Accordingly, the detection of aPL by immunoassays (anticardiolipin antibodies; anti-beta2 glycoprotein I antibodies) has become a routine practice in the clinical workup of patients with systemic autoimmune diseases. aPL are mostly assayed using commercial ELISA kits, whose performance has not been found to be sufficiently concordant among the different manufacturers. In the past years, collaborative groups have spent considerable effort to reach some form of standardization but this process is still ongoing. Such lack of standardization has recently become even more crucial, as manufacturers have had to face an increasing demand for fully automated tests for aPL, like those test systems that have been developed for other autoantibodies (e.g., antinuclear antibodies, anti-ENA antibodies). We therefore report our recent experience with two newly developed automated methods for anticardiolipin antibodies testing. In particular, we discuss the results obtained using routine samples, as we believe that these better reflect the "real-life" situation in which those automated methods will operate. We also mention other emerging technologies in the field of aPL detection.

  20. Editorial: Advanced Learning Technologies, Performance Technologies, Open Contents, and Standards - Some Papers from the Best Papers of the Conference ICCE C3 2009

    Directory of Open Access Journals (Sweden)

    Fanny Klett (IEEE Fellow

    2010-09-01

    Full Text Available This special issue deals with several cutting edge research outcomes from recent advancement of learning technologies. Advanced learning technologies are the composition of various related technologies and concepts such as i internet technologies and mobile technologies, ii human and organizational performance/knowledge management, and iii underlying trends toward open technology, open content and open education. This editorial note describes the overview of these topics related to the advanced learning technologies to provide the common framework for the accepted papers in this special issue.

  1. Capsicum--production, technology, chemistry, and quality--Part II. Processed products, standards, world production and trade.

    Science.gov (United States)

    Govindarajan, V S

    1986-01-01

    Capsicums, as a spice, have been known since the beginning of civilization and historically associated with the discovery of the New World. The genus Capsicum (Fam. Solanaceae) provides many varieties and adds color, pungency, and aroma to the cuisines of most of the world. From the pungent chilli, of interest also to pharmaceuticals, to the colorful paprika and the bell capsicums with its remarkable aroma, the genus has been of great interest for its chemistry and physiological action. Pungency as a sensory attribute, its evaluation, structure-activity relationship, and its increasing acceptance and preference by diverse populations of the world are of great interest to many research disciplines. In a comprehensive review of all aspects in four sequential parts, Part I deals with History, Botany, Cultivation, and Primary Processing (CRC Critical Review, Food Science and Nutrition). The Capsicums among the spices are second only to black pepper in trades both in volume and value. The production of the different forms of this spice as ground, specialty seasonings, and as the concentrated oleoresins through technologically advanced processes, proposed newer products, the standard to control quality of the different products, world production, trade, and prospects are reviewed in detail in this, Part II.

  2. Standardization of seismic tomographic models and earthquake focal mechanisms data sets based on web technologies, visualization with keyhole markup language

    Science.gov (United States)

    Postpischl, Luca; Danecek, Peter; Morelli, Andrea; Pondrelli, Silvia

    2011-01-01

    We present two projects in seismology that have been ported to web technologies, which provide results in Keyhole Markup Language (KML) visualization layers. These use the Google Earth geo-browser as the flexible platform that can substitute specialized graphical tools to perform qualitative visual data analyses and comparisons. The Network of Research Infrastructures for European Seismology (NERIES) Tomographic Earth Model Repository contains data sets from over 20 models from the literature. A hierarchical structure of folders that represent the sets of depths for each model is implemented in KML, and this immediately results into an intuitive interface for users to navigate freely and to compare tomographic plots. The KML layer for the European-Mediterranean Regional Centroid-Moment Tensor Catalog displays the focal mechanism solutions or moderate-magnitude Earthquakes from 1997 to the present. Our aim in both projects was to also propose standard representations of scientific data sets. Here, the general semantic approach of an XML framework has an important impact that must be further explored, although we find the KML syntax to more emphasis on aspects of detailed visualization. We have thus used, and propose the use of, Javascript Object Notation (JSON), another semantic notation that stems from the web-development community that provides a compact, general-purpose, data-exchange format.

  3. National Institute of Standards and Technology measurement service of the optical properties of biomedical phantoms: current status

    Science.gov (United States)

    Lemaillet, Paul; Cooksey, Catherine C.; Levine, Zachary H.; Pintar, Adam L.; Hwang, Jeeseong; Allen, David W.

    2016-03-01

    The National Institute of Standards and Technology (NIST) has maintained scales for reflectance and transmittance over several decades. The scales are primarily intended for regular transmittance, mirrors, and solid surface scattering diffusers. The rapidly growing area of optical medical imaging needs a scale for volume scattering of diffuse materials that are used to mimic the optical properties of tissue. Such materials are used as phantoms to evaluate and validate instruments under development intended for clinical use. To address this need, a double-integrating sphere based instrument has been installed to measure the optical properties of tissue-mimicking phantoms. The basic system and methods have been described in previous papers. An important attribute in establishing a viable calibration service is the estimation of measurement uncertainties. The use of custom models and comparisons with other established scales enabled uncertainty measurements. Here, we describe the continuation of those efforts to advance the understanding of the uncertainties through two independent measurements: the bidirectional reflectance distribution function and the bidirectional transmittance distribution function of a commercially available solid biomedical phantom. A Monte Carlo-based model is used and the resulting optical properties are compared to the values provided by the phantom manufacturer.

  4. Competency Standards for Bachelor of Industrial Technology Graduates for the Construction Industry in Region IV-A: Inputs For Curriculum Enhancement

    Directory of Open Access Journals (Sweden)

    George P. Compasivo

    2015-12-01

    Full Text Available The main objective of this study was to develop competency standards for Industrial Technology graduates for employment in the construction industry in Region IV-A, Philippines. It specifically identified the basic and core competency standards for industrial technology and determined the degree of importance of competencies needed in the construction industry sector. The study identified 28 common competencies for three areas of specializations in industrial technology namely: electrical, civil and drafting technology. There were 39 core competencies for electrical, 31 for drafting and 38 items for civil technology. A total of 50 panel of experts were carefully selected using the purposive sampling as respondents in the study. Experts are selected based on their technical know-how or proficiency and currently practicing their line of profession in the construction industry. The study used the descriptive-developmental method of research. The Delphi technique was applied to determine if the competency under investigation reached the general agreement of opinions by the panel of experts involved. The findings implied that the newly developed competency standards were good input for curriculum enhancement in the area of civil, drafting and electrical technology. The study recommended the newly developed competencies may be followed by the faculty in the course they teach and the new competency items suggested by the panel of experts for inclusion in the curriculum for the three areas of specializations may be considered during the curriculum revision.

  5. Comparison of Standard Automated Perimetry, Short-Wavelength Automated Perimetry, and Frequency-Doubling Technology Perimetry to Monitor Glaucoma Progression.

    Science.gov (United States)

    Hu, Rongrong; Wang, Chenkun; Gu, Yangshun; Racette, Lyne

    2016-02-01

    Detection of progression is paramount to the clinical management of glaucoma. Our goal is to compare the performance of standard automated perimetry (SAP), short-wavelength automated perimetry (SWAP), and frequency-doubling technology (FDT) perimetry in monitoring glaucoma progression.Longitudinal data of paired SAP, SWAP, and FDT from 113 eyes with primary open-angle glaucoma enrolled in the Diagnostic Innovations in Glaucoma Study or the African Descent and Glaucoma Evaluation Study were included. Data from all tests were expressed in comparable units by converting the sensitivity from decibels to unitless contrast sensitivity and by expressing sensitivity values in percent of mean normal based on an independent dataset of 207 healthy eyes with aging deterioration taken into consideration. Pointwise linear regression analysis was performed and 3 criteria (conservative, moderate, and liberal) were used to define progression and improvement. Global mean sensitivity (MS) was fitted with linear mixed models.No statistically significant difference in the proportion of progressing and improving eyes was observed across tests using the conservative criterion. Fewer eyes showed improvement on SAP compared to SWAP and FDT using the moderate criterion; and FDT detected less progressing eyes than SAP and SWAP using the liberal criterion. The agreement between these test types was poor. The linear mixed model showed a progressing trend of global MS overtime for SAP and SWAP, but not for FDT. The baseline estimate of SWAP MS was significantly lower than SAP MS by 21.59% of mean normal. FDT showed comparable estimation of baseline MS with SAP.SWAP and FDT do not appear to have significant benefits over SAP in monitoring glaucoma progression. SAP, SWAP, and FDT may, however, detect progression in different glaucoma eyes.

  6. Tower-based greenhouse gas measurement network design—The National Institute of Standards and Technology North East Corridor Testbed

    Science.gov (United States)

    Lopez-Coto, Israel; Ghosh, Subhomoy; Prasad, Kuldeep; Whetstone, James

    2017-09-01

    The North-East Corridor (NEC) Testbed project is the 3rd of three NIST (National Institute of Standards and Technology) greenhouse gas emissions testbeds designed to advance greenhouse gas measurements capabilities. A design approach for a dense observing network combined with atmospheric inversion methodologies is described. The Advanced Research Weather Research and Forecasting Model with the Stochastic Time-Inverted Lagrangian Transport model were used to derive the sensitivity of hypothetical observations to surface greenhouse gas emissions (footprints). Unlike other network design algorithms, an iterative selection algorithm, based on a k-means clustering method, was applied to minimize the similarities between the temporal response of each site and maximize sensitivity to the urban emissions contribution. Once a network was selected, a synthetic inversion Bayesian Kalman filter was used to evaluate observing system performance. We present the performances of various measurement network configurations consisting of differing numbers of towers and tower locations. Results show that an overly spatially compact network has decreased spatial coverage, as the spatial information added per site is then suboptimal as to cover the largest possible area, whilst networks dispersed too broadly lose capabilities of constraining flux uncertainties. In addition, we explore the possibility of using a very high density network of lower cost and performance sensors characterized by larger uncertainties and temporal drift. Analysis convergence is faster with a large number of observing locations, reducing the response time of the filter. Larger uncertainties in the observations implies lower values of uncertainty reduction. On the other hand, the drift is a bias in nature, which is added to the observations and, therefore, biasing the retrieved fluxes.

  7. A Brief Discussion on Standardization System of Exhibits in Science and Technology Museums%浅谈科技馆展品的评价标准

    Institute of Scientific and Technical Information of China (English)

    王洪鹏

    2011-01-01

    The science and technology museums exert a positive effect on promoting the technological development,which assume a position to disseminate science and enhance the scientific quality of public.Based on the analysis of specific exhibits,this paper proposes the composition of standardization system for exhibitsin science and technology museums,describes the major contents of the standard.%科技馆是普及科学知识、提高公众科学素质的重要场所,对推动科技进步具有重要作用。结合具体展品,本文提出了科技馆展品标准化体系的构成,论述了标准化体系所涵盖标准的主要内容。

  8. Research and Solutions for Issues of Marine Standards Technology Examination%海洋标准技术审查问题研究与对策建议

    Institute of Scientific and Technical Information of China (English)

    汤海荣; 粟义; 叶盛林; 张文娜

    2013-01-01

    Citing the marine environment protection standards, this paper presents the main issues of the marine standards technology examination, analyses the cause, and puts forward the corresponding solutions to search for method to enhance efifciency of standard technology examination.%本文以海洋环境保护标准为例,阐述了海洋标准技术审查工作中存在的主要问题,分析了问题产生的原因,并在此基础上提出了相应的对策建议,以寻求提高标准技术审查工作效率的方法和途径。

  9. Research on Standardization for Service of Science & Technology Entrepreneurship Competition%科技创业赛事服务标准化研究

    Institute of Scientific and Technical Information of China (English)

    仇松杏

    2016-01-01

    In the era of encouraging people to do business creatively and drive innovation, science & technology entrepreneurship competition has become an important platform for creating good ecological environment of entrepreneurship and innovation. On the other wide, establishing and optimizing the event service standards in order to improve the quality of service must be done in the way of developing science & technology entrepreneurship competition, the competition itself provides a unique platform for the practice of standardization theory research and application service. In this paper, the concept of science&technology entrepreneurship competition and the service of science & technology entrepreneurship competition are described. The significance of the standardization of science &technology entrepreneurship competition, the construction of standard system, and the documentation of service standards are also studied. And propose the problems that need to be solved in the construction of standardization, and it is proved that the service standardization of science&technology entrepreneurship competition is a road of construction.%在大众创业、万众创新的时代,科技创业赛事已成为打造良好的创业创新生态环境的重要平台,而建立并优化赛事服务标准以提高服务质量是科技创业赛事发展的必经之路,科技创业赛事本身也为标准化理论研究与应用服务提供了难得的实践平台。本文阐述了科技创业赛事及科技创业赛事服务的概念,对科技创业赛事标准化的意义、赛事服务标准体系建设、科技创业赛事服务标准编制等做了研究。并进一步提出标准化建设中出现及需要解决的问题,印证科技创业赛事服务标准化是一条建设之路。

  10. Tapping Technology's Potential: Shrinking Budgets, Looming Standards, and a Dizzying Array of Innovations Are Changing the Professional Learning Landscape

    Science.gov (United States)

    Killion, Joellen

    2013-01-01

    As the call for professional learning that incorporates ongoing feedback and support increases and resources to address that need decline, more states, districts, schools, and individuals are turning to technology. Technology creates significant opportunities for more focused professional learning, especially when it is effectively integrated into…

  11. California Diploma Project Technical Report III: Validity Study--Validity Study of the Health Sciences and Medical Technology Standards

    Science.gov (United States)

    McGaughy, Charis; Bryck, Rick; de Gonzalez, Alicia

    2012-01-01

    This study is a validity study of the recently revised version of the Health Science Standards. The purpose of this study is to understand how the Health Science Standards relate to college and career readiness, as represented by survey ratings submitted by entry-level college instructors of health science courses and industry representatives. For…

  12. Standardized Cultivation Technology Regulation of Anqiu Peach%安丘蜜桃标准化栽培技术规程

    Institute of Scientific and Technical Information of China (English)

    肖永成

    2015-01-01

    本文简述了安丘蜜桃的标准化栽培技术,对建园技术、土肥水管理、整形修剪以及病虫害防治等技术,进行了科学的、系统的阐述,以期通过标准化栽培技术的推广达到高产、稳产、优质、高效的目的。%In this paper, the standard cultivation techniques of Anqiu peach orchard was introduced. Many technologies including construction technology of orchard, fertilizer and water management, pruning, pest prevention, and disaster prevention were described scientifically, systematically, in order to promote the standardization of cultivation techniques and to achieve high and stable yield of good quality and high efficiency.

  13. 77 FR 40332 - Request for Nominations for Members To Serve on National Institute of Standards and Technology...

    Science.gov (United States)

    2012-07-09

    ... consist of approximately eleven members selected on a clear, standardized basis, in accordance with... participation at meetings, it is desired that members be able to devote the equivalent of seven days between...

  14. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  15. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 7: Industrial Maintenance Technology, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    Science.gov (United States)

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  16. Secondary calibration laboratory for ionizing radiation laboratory accreitation program National Institute of Standards and Technology National Voluntary Laboratory Accreditation Program

    Energy Technology Data Exchange (ETDEWEB)

    Martin, P.R.

    1993-12-31

    This paper presents an overview of the procedures and requirements for accreditation under the Secondary Calibration Laboratory for Ionizing Radiation Program (SCLIR LAP). The requirements for a quality system, proficiency testing and the onsite assessment are discussed. The purpose of the accreditation program is to establish a network of secondary calibration laboratories that can provide calibrations traceable to the primary national standards.

  17. Technology Solution and Standards Development for Mobile Payment%移动支付技术方案与标准进展

    Institute of Scientific and Technical Information of China (English)

    袁琦

    2012-01-01

    With the rapid development of mobile Internet, mobile payment as an important means for purchasing digital products and goods on the Internet, has gradually become one of the most important services of mobile Internet. This paper mainly studies the technology solution and standards development for near field payment, including the technology architecture, mobile terminal, card solution, trusted service management platform solution and standards development for mobile payment. It has very important significance for mobile payment technology and industrial development.%随着移动互联网快速发展,移动支付作为网上购买数字产品和实物的重要手段,逐步成为移动互联网的重要业务之一。文章主要研究移动近场支付技术方案及标准进展,主要包括移动支付技术架构、移动支付终端和卡技术方案、可信服务管理平台技术方案以及移动支付标准进展,对移动支付技术和产业的发展具有重要的指导意义。

  18. Smart facility location planning using GIS technology & facility provision standards for pro-active planning of social facilities

    CSIR Research Space (South Africa)

    Green, Cheri

    2016-08-01

    Full Text Available and Industrial Research SOUTH AFRICA 2 © CSIR 2016 www.csir.co.za Structure of presentation • Key informants & objectives • Linking Accessibility planning; Planning Support Systems and the Smart City concept • Approach & provision... of life, with a wise management of natural resources, through participatory governance” Caragllui 2011 Planning Support Systems (PSS) can be defined as geo-information technology...

  19. Postures of pediatric dentists toward endodontic standards and acceptance of novel technology in Udaipur city: A questionnaire survey

    Directory of Open Access Journals (Sweden)

    Chirag M Raiyani

    2015-01-01

    Full Text Available Background: To ascertain the current clinical practice of pediatric dentists involves utilization of a variety of materials and recent technological advances. Materials and Methods: A total of 218 pediatric dentists (118 males and 100 females were selected for the study those are registered in IDA Udaipur and surveyed using a self-administered questionnaire. Participants were divided into three groups according to their year of experience in the clinical practice. A total of 11 structured questions presented through a pilot study done among the 10% of the total participant′s related to endodontic procedure were used for the study. Frequency and percentage distribution were calculated. Results: The results showed that glass bead sterilization (41.3% was the most commonly used method for sterilization. Isolation during the pulpectomy procedure performed using cotton rolls and suction tip (40.4%. Most of them used hand instruments (58.3% among those; K-file (42.7% was widely used. Radiographic method (53.7% was most common procedure for determination of working length. Single sitting pulpectomy was not commonly preferred. Conclusion:The results of this study indicated that endodontic technology and materials for pulpectomy procedures are slowly being adapted in clinical practice in India. Therefore, pediatric dentist should update their knowledge and practice with current technology.

  20. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  1. 日本对数字化学习技术标准的推动%E-Learning technology standard promotion activities in Japan

    Institute of Scientific and Technical Information of China (English)

    仲林清

    2012-01-01

    Open technology and open standards play important roles in the progress of e-Learning.Japanese e-Learning industry,being aware of this importance,has paid a lot of attention and made various efforts to disseminate open technology and open standards in e-Learning.Among these efforts,e-Learning Consortium Japan,a group of Japanese e-Learning providers and user institutes,has implemented and operated several programs to facilitate e-Learning technology standards promotion in terms of technical resource development and engineers' skill development.This paper describes such programs including development of software modules for SCORM implementation and SCORM engineer certification program.%日本数字化学习行业认识到开放技术和开放标准的重要性,因此一直在努力推广它们;由供应商和用户机构联合成立的“日本数字化学习联盟”(e-Learning Consortium Japan)已经实施了一些项目,以推动数字化学习技术与开发的标准化工作.本文主要介绍,该联盟为实现“内容共享对象参考模型”(Sharable Content Object Reference Model,SCORM)标准方案而开展的软件模块开发项目和SCORM工程师认证项目.

  2. Determination of the Planck constant using a watt balance with a superconducting magnet system at the National Institute of Standards and Technology

    CERN Document Server

    Schlamminger, Stephan; Seifert, Frank; Chao, Leon S; Newell, David B; Liu, Ruimin; Steiner, Richard L; Pratt, Jon R

    2014-01-01

    For the past two years, measurements have been performed with a watt balance at the National Institute of Standards and Technology (NIST) to determine the Planck constant. A detailed analysis of these measurements and their uncertainties has led to the value $h=6.626\\,069\\,79(30)\\times 10^{-34}\\,$J$\\,$s. The relative standard uncertainty is $ 45\\times 10^{-9}$. This result is $141\\times 10^{-9}$ fractionally higher than $h_{90}$. Here $h_{90}$ is the conventional value of the Planck constant given by $h_{90}\\equiv 4 /( K_{\\mathrm{J-90}}^2R_{\\mathrm{K-90}})$, where $K_{\\mathrm{J-90}}$ and $R_{\\mathrm{K-90}}$ denote the conventional values of the Josephson and von Klitzing constants, respectively.

  3. Transferability of ASTM/NIST alanine-polyethylene recipe at ISS. American Society for Testing and Materials/National Institute for Standards and Technology. Istituto Superiore de Sanita

    Science.gov (United States)

    De Angelis C; Fattibene; Onori; Petetti; Bartolotta; Sansone Santamaria A

    2000-05-01

    Alanine-polyethylene solid state dosimeters were prepared at Istituto Superiore di Sanita (ISS) following the recipe proposed by National Institute of Standards and Technology (NIST) with the goal of testing its transferability. Dosimeters were prepared using 95% alanine and 5% polyethylene, by weight. They are rugged and of increased sensitivity, repeatability and reproducibility as respect to the ISS alanine-paraffin pellets. Reproducibility of about 1% was obtained at 10 Gy and at 3 Gy if one single pellet or a stack of five dosimeters were used, respectively.

  4. Analytical capabilities of the new thermal neutron prompt gamma-ray activation analysis instrument at the National Institute of Standards and Technology Center for Neutron Research

    Energy Technology Data Exchange (ETDEWEB)

    Mackey, E.A. [National Institute of Standards and Technology, Analytical Chemistry Division, Gaithersburg, MD (United States); Anderson, D.L. [US Food and Drug Administration, Elemental Research Branch, College Park, MD (United States)

    2004-07-01

    A new thermal neutron prompt gamma-ray activation analysis (PGAA) instrument was designed and built to replace the original PGAA system at the National Institute of Standards and Technology's Center for Neutron Research. The new PGAA instrument was constructed to achieve a reduction of the fast neutron beam component, a reduction of background gamma-radiation (including gamma-ray lines that directly interfere with element analyses, low-energy scattered gamma rays, and Compton scattered gamma rays), improvement in element sensitivities and limits of detection (LODs), and a simplified instrument set-up procedure. (orig.)

  5. Evolutionary Game Analysis Underlying the Strategic Choice of Technology Progress Based on Technology Standard%基于技术标准的技术进步策略选择——一个进化博弈分析

    Institute of Scientific and Technical Information of China (English)

    曹群; 刘任重

    2012-01-01

    生产方式的巨大变革使得国家之间的竞争转变为对行业主导权的争夺和市场利益的分割。技术标准因其具有的网络效应和巨大的外部性,使得其成为国家之间竞争的焦点。但是,在技术标准主导权的争夺中,技术后发国家因为其存在的各种瓶颈资源的限制,使得其在技术标准领域始终处于被动的技术引进位置。多代际的技术标准使得技术后发国家要付出巨额的专利使用费。技术后发国家能否通过技术标准的自主创新摆脱被动地位,尽快完成技术追赶,论证其合理性和必然性是本文研究的核心命题。本文系统总结和梳理国内外文献,在经济主体有限理性的前提下,将博弈群体分为技术早发国家和技术后发国家,通过构建进化博弈模型,以及技术早发国家和技术后发国家之间的博弈支付矩阵,运用复制动态方程分析和雅可比矩阵判断法,分析这两类群体技术进步策略选择的动态趋势,并求出两类博弈群体均以一定概率选择技术标准的自主创新策略为该模型的进化稳定策略,并论证其合理性。再根据成本收益分析,证明在集中高技术专利的技术标准的竞争中,技术后发国家选择技术标准的自主创新策略以避免路径依赖必然性。%Tech-standards are the technical criteria designed for the proceedings which needs unified coordination in technical activities, and a unified definition for the repetitive technical proceedings. In the industrial society, the decrease in transaction costs, improvement in economies of scale and resulting material increase in production efficiency can be attributable to the public good property and exchangeable standardized parts and components based on tech-standards. With the advent of knowledge-oriented era and rapid development of science and technology, production technology is becoming immensely complicated and

  6. Comparison of visual field test results obtained through Humphrey matrix frequency doubling technology perimetry versus standard automated perimetry in healthy children

    Directory of Open Access Journals (Sweden)

    Sibel Kocabeyoglu

    2013-01-01

    Full Text Available Aims : The aim of this study was to compare the visual field test results in healthy children obtained via the Humphrey matrix 24-2 threshold program and standard automated perimetry (SAP using the Swedish interactive threshold algorithm (SITA-Standard 24-2 test. Materials and Methods: This prospective study included 55 healthy children without ocular or systemic disorders who underwent both SAP and frequency doubling technology (FDT perimetry visual field testing. Visual field test reliability indices, test duration, global indices (mean deviation [MD], and pattern standard deviation [PSD] were compared between the 2 tests using the Wilcoxon signed-rank test and paired t-test. The performance of the Humphrey field analyzer (HFA 24-2 SITA-standard and frequency-doubling technology Matrix 24-2 tests between genders were compared with Mann-Whitney U-test. Results: Fifty-five healthy children with a mean age of 12.2 ± 1.9 years (range from 8 years to 16 years were included in this prospective study. The test durations of SAP and FDT were similar (5.2 ± 0.5 and 5.1 ± 0.2 min, respectively, P = 0.651. MD and the PSD values obtained via FDT Matrix were significantly higher than those obtained via SAP (P < 0.001, and fixation losses and false negative errors were significantly less with SAP (P < 0.05. A weak positive correlation between the two tests in terms of MD (r = 0.352, P = 0.008 and PSD (r = 0.329, P = 0.014 was observed. Conclusion: Children were able to complete both the visual test algorithms successfully within 6 min. However, SAP testing appears to be associated with less depression of the visual field indices of healthy children. FDT Matrix and SAP should not be used interchangeably in the follow-up of children.

  7. Radiation tolerant VLSI circuits in standard deep submicron CMOS technologies for the LHC experiments practical design aspects

    CERN Document Server

    Anelli, G; Delmastro, M; Faccio, F; Floria, S; Giraldo, A; Heijne, Erik H M; Jarron, Pierre; Kloukinas, Kostas C; Marchioro, A; Moreira, P; Snoeys, W

    1999-01-01

    We discuss design issues related to the extensive use of Enclosed Layout Transistors (ELT's) and guard rings in deep submicron CMOS technologies in order to improve radiation tolerance of ASIC's designed for the LHC experiments (the Large Hadron Collider at present under construction at CERN). We present novel aspects related to the use of ELT's: noise measured before and after irradiation up to 100 Mrad (SiO/sub 2/), a model to calculate the W/L ratio and matching properties of these devices. Some conclusions concerning the density and the speed of IC's conceived with this design approach are finally drawn. (16 refs).

  8. Report from AmSECT’s International Consortium for Evidence-Based Perfusion: American Society of ExtraCorporeal Technology Standards and Guidelines for Perfusion Practice: 2013

    Science.gov (United States)

    Baker, Robert A.; Bronson, Shahna L.; Dickinson, Timothy A.; Fitzgerald, David C.; Likosky, Donald S.; Mellas, Nicholas B.; Shann, Kenneth G.

    2013-01-01

    Abstract: One of the roles of a professional society is to develop standards and guidelines of practice as an instrument to guide safe and effective patient care. The American Society of Extracorporeal Technology (AmSECT) first published its Essentials for Perfusion Practice, Clinical Function: Conduct of Extracorporeal Circulation in 1993. The International Consortium for Evidence-Based Perfusion (ICEBP), a committee within AmSECT, was tasked with updating this document in 2010. The aim of this report is to describe the method of development and content of AmSECT’s new professional standards and guidelines. The ICEBP committee independently evaluated and provided input regarding the current “Essentials and Guidelines.” Structural changes were made to the entire document, and a draft document was developed, presented, and circulated to the AmSECT Board of Directors and broader membership for comment. Informed by these reviews, a revised document was then presented to the Society for a membership vote. The final document consists of 15 areas of practice covered by 50 Standards and 38 Guidelines (see Appendix 1) with the first standard focusing on the development of institutional protocols to support their implementation and use. A majority of the membership voted to accept the document (81.2% of the voting membership accepting, 18.8% rejecting). After an audit of the balloting process by AmSECT’s Ethics Committee, the results were reported to the membership and the document was officially adopted on July 24, 2013. The Standards and Guidelines will serve as a useful guide for cardiac surgical teams that wish to develop institution-specific standards and guidelines to improve the reliability, safety, and effectiveness of adult cardiopulmonary bypass. The ICEBP recognizes that the development of a Standards and Guidelines statement alone will not change care. Safe, reliable, and effective care will be best served through the development and implementation of

  9. A pilot study to evaluate the application of a generic protein standard panel for quality control of biomarker detection technologies

    Directory of Open Access Journals (Sweden)

    Valdivia Hernan J

    2011-08-01

    Full Text Available Abstract Background Protein biomarker studies are currently hampered by a lack of measurement standards to demonstrate quality, reliability and comparability across multiple assay platforms. This is especially pertinent for immunoassays where multiple formats for detecting target analytes are commonly used. Findings In this pilot study a generic panel of six non-human protein standards (50 - 10^7 pg/mL of varying abundance was prepared as a quality control (QC material. Simulated "normal" and "diseased" panels of proteins were prepared in pooled human plasma and incorporated into immunoassays using the Meso Scale Discovery® (MSD® platform to illustrate reliable detection of the component proteins. The protein panel was also evaluated as a spike-in material for a model immunoassay involving detection of ovarian cancer biomarkers within individual human plasma samples. Our selected platform could discriminate between two panels of the proteins exhibiting small differences in abundance. Across distinct experiments, all component proteins exhibited reproducible signal outputs in pooled human plasma. When individual donor samples were used, half the proteins produced signals independent of matrix effects. These proteins may serve as a generic indicator of platform reliability. Each of the remaining proteins exhibit differential signals across the distinct samples, indicative of sample matrix effects, with the three proteins following the same trend. This subset of proteins may be useful for characterising the degree of matrix effects associated with the sample which may impact on the reliability of quantifying target diagnostic biomarkers. Conclusions We have demonstrated the potential utility of this panel of standards to act as a generic QC tool for evaluating the reproducibility of the platform for protein biomarker detection independent of serum matrix effects.

  10. Digital standard cells and operational amplifiers for operation up to 250 degrees C using low-cost CMOS technology

    Science.gov (United States)

    Stemmer, Jens; Ackermann, Joerg; Uffmann, Dirk; Aderhold, Jochen

    1996-09-01

    There is an increasing demand from automotive, aircraft and space industry for reliable high temperature resistant electronics. Circuits with reliable functionality up to temperatures of 250 degree(s)C would be sufficient for most of these applications. Digital standard cells and operational amplifiers are the basic building blocks of these circuits. Commercially available digital standard cell libraries and operational amplifiers are normally specified for operation up to a maximum temperature of 125 degree(s)C. Hence, the purpose of this work was the design and characterization of digital standard cells and operational amplifiers for operation up to 250 degree(s)C using a low-cost 1.0 micrometers epi-CMOS process. Several design measures were applied to the cells in order to further improve latch-up resistivity and to limit leakage currents, respectively. The transfer curves of all digital cells for all input signal combinations have been recorded in the temperature range from 30 to 250 degree(s)C. Significant results are very low temperature shifts of the noise margins and of the switching point, respectively. Furthermore, the low (0 V) and high (5 V) levels are reached exactly over the entire temperature range. Outstanding characteristics of the operational amplifier comprise low open-loop gain temperature drift as well as low offset and offset temperature drift, respectively. The open-loop gain was greater than 83 dB at room temperature with a drift of less than 0.02 dB/ degree(s)C. The offset voltage amounted to -1 mV at room temperature and 1 mV at 250 degree(s)C, respectively. The long-term behavior of these cells is currently under investigation.

  11. Journal of Research of the National Institute of Standards and Technology, March - April 1991, volume 96, number 2

    Science.gov (United States)

    The following subject areas are covered: linearity of a silicon photodiode at 30 MHz and its effect on heterodyne measurements; use of the electrostatic classification method to size 0.1 micrometer SRM particles - a feasibility study; a multiple variable-angle light scattering detector for gel permeation chromatography; proposed new electrolytic conductivity primary standards for KCl solutions; digital image analysis assisted microradiography - measurement of mineral content of caries lesions in teeth; bidirectional scattering distribution function - a systematized bibliography; and a limited international intercomparison of responsivity scales at fiber optic wavelength.

  12. New technologies for x-ray standards and applications. A study for the NMS quantum metrology programme

    CERN Document Server

    Flowers, J

    2003-01-01

    Very rapid progress has been made over the last decade in x-ray technology. The brightness and coherence of available sources has increased remarkably. This report is concerned particularly with. the development of so-called 'table-top' x-ray laser sources, the generation of high order harmonics of intense ultrashort optical pulses and advances in soft x-ray optics. These technologies combined open up new areas of metrology and research, they also provide the dramatic scaling down of experiments that once required accelerator-sized sources and hence make this work more widely accessible to industry and small-scale science. This may well lead to much wider adoption of x-ray techniques particularly those using coherent x-rays. More speculatively, the potential of interactions with nuclear energy levels is discussed. Moessbauer levels have high energies and very high quality factors, and hence are potentially useful as x-ray frequency references: the realisation of this will require further dramatic advances in ...

  13. A Phase Change Memory Chip Based on TiSbTe Alloy in 40-nm Standard CMOS Technology

    Institute of Scientific and Technical Information of China (English)

    Zhitang Song; YiPeng Zhan; Daolin Cai; Bo Liu; Yifeng Chen; Jiadong Ren

    2015-01-01

    In this letter, a phase change random access memory (PCRAM) chip based on Ti0.4Sb2Te3 alloy material was fabricated in a 40-nm 4-metal level complementary metal-oxide semiconductor (CMOS) technology. The phase change resistor was then integrated after CMOS logic fabrication. The PCRAM was successfully embedded without changing any logic device and process, in which 1.1 V negative-channel metal-oxide semiconductor device was used as the memory cell selector. The currents and the time of SET and RESET operations were found to be 0.2 and 0.5 mA, 100 and 10 ns, respectively. The high speed performance of this chip may highlight the design advantages in many embedded applications.

  14. Modeling Technology for Automatic Test System Software Based on Automatic Test Markup Language Standard%基于ATML标准的ATS软件建模技术

    Institute of Scientific and Technical Information of China (English)

    杨占才; 王红; 范利花; 张桂英; 杨小辉

    2013-01-01

      论述了国外ATML标准体系结构和构成ATML标准所有子模型的描述方法,提出了在现有ATS软件平台基础上,实现兼容ATML标准所需的建模流程设计、模型识别及模型运行流程设计等技术途径,为实现ATS软件平台的通用性、开放性及武器装备各种维护级别的测试资源的共享奠定了技术基础。%  all the model definition method, system architecture and the expression manner for ATML standard are discussed. Several major technology problems for the existing automatic test system software platform compatible with ATML standard are presented, such as the design for modeling flow, model identification and model running flow. All the Technology Foundation is supplied for resolving the general and open issues of the automatic test system software platform, and the testing resources share for all the maintenance level.

  15. Glaucoma progression detection with frequency doubling technology (FDT) compared to standard automated perimetry (SAP) in the Groningen Longitudinal Glaucoma Study.

    Science.gov (United States)

    Wesselink, Christiaan; Jansonius, Nomdo M

    2017-09-01

    To determine the usefulness of frequency doubling perimetry (FDT) for progression detection in glaucoma, compared to standard automated perimetry (SAP). Data were used from 150 eyes of 150 glaucoma patients from the Groningen Longitudinal Glaucoma Study. After baseline, SAP was performed approximately yearly; FDT every other year. First and last visit had to contain both tests. Using linear regression, progression velocities were calculated for SAP (Humphrey Field Analyzer) mean deviation (MD) and FDT MD and the number of test locations with a total deviation probability below p SAP and FDT classifications were made using a Mantel Haenszel chi-square test. Longitudinal signal-to-noise ratios (LSNRs) were calculated, per patient and per technique, defined as progression velocity divided by the standard deviation of the residuals. Mean (SD) follow-up was 6.4 (1.7) years; median (interquartile range [IQR]) baseline SAP MD -6.6 (-14.2 to -3.6) dB. On average 8.2 and 4.5 tests were performed for SAP and FDT, respectively. Median (IQR) MD slope was -0.16 (-0.46 to +0.02) dB/year for SAP and -0.05 (-0.39 to +0.17) dB/year for FDT. Mantel Haenszel chi-squares of SAP MD vs FDT MD and TD were 12.5 (p SAP MD (median -0.17 yr(-1) ) were better than those for FDT MD (-0.04 yr(-1) ; p = 0.010). FDT may be a useful technique for monitoring glaucoma progression in patients who cannot perform SAP reliably. © 2017 The Authors Ophthalmic & Physiological Optics © 2017 The College of Optometrists.

  16. First-ever test and characterization of the AMS standard bulk 0.35 μm CMOS technology at sub-kelvin temperatures

    Science.gov (United States)

    Rhouni, A.; Gevin, O.; de la Broïse, X.; Sauvageot, JL; Revéret, V.; Rodriguez, L.

    2017-05-01

    From medical imaging to particle physics passing, among others, by space applications, integrated readout electronics (ICs) in CMOS technologies are often adopted. When a high sensitivity and a low noise level are required, cooling of detectors and readout electronics is the recommended solution. To maintain a constant cooling temperature, they very often operate at nitrogen and helium-4 liquids temperatures, respectively 77 K and 4.2 K. At these temperatures, Spice parameters of MOSFET transistors may be found in the literature. However, their performances at sub-kelvin temperatures remain unknown because of a lack in scientific publications thereupon. CEA Astrophysics division’s focal plane arrays-based bolometers are cooled at 0.1 K. The front-end electronics also. However, a CMOS technology was characterized for the first time at sub-kelvin temperatures. It is shown by measured n and p channel transistors’ I-V that the AMS 0.35 μm standard bulk CMOS technology, is still performing at 0.1 K. Despite some specific effects on silicon behaviour at cryogenic temperatures, performances are very satisfactory.

  17. Stereotactic body radiation therapy for prostate cancer: is the technology ready to be the standard of care?

    Science.gov (United States)

    Zaorsky, Nicholas G; Studenski, Matthew T; Dicker, Adam P; Gomella, Leonard; Den, Robert B

    2013-05-01

    Prostate cancer is the second most prevalent solid tumor diagnosed in men in the United States and Western Europe. Stereotactic body radiation therapy (SBRT) is touted as a superior type of external beam radiation therapy (EBRT) for the treatment of various tumors. SBRT developed from the theory that high doses of radiation from brachytherapy implant seeds could be recapitulated from advanced technology of radiation treatment planning and delivery. Moreover, SBRT has been theorized to be advantageous compared to other RT techniques because it has a treatment course shorter than that of conventionally fractionated EBRT (a single session, five days per week, for about two weeks vs. eight weeks), is non-invasive, is more effective at killing tumor cells, and is less likely to cause damage to normal tissue. In areas of the US and Europe where there is limited access to RT centers, SBRT is frequently being used to treat prostate cancer, even though long-term data about its efficacy and safety are not well established. We review the impetus behind SBRT and the current clinical evidence supporting its use for prostate cancer, thus providing oncologists and primary care physicians with an understanding of the continually evolving field of prostate radiation therapy. Studies of SBRT provide encouraging results of biochemical control and late toxicity. However, they are limited by a number of factors, including short follow-up, exclusion of intermediate- and high-risk patients, and relatively small number of patients treated. Currently, SBRT regimens should only be used in the context of clinical trials.

  18. Catalytic Functions of Standards

    NARCIS (Netherlands)

    K. Blind (Knut)

    2009-01-01

    textabstractThe three different areas and the examples have illustrated several catalytic functions of standards for innovation. First, the standardisation process reduces the time to market of inventions, research results and innovative technologies. Second, standards themselves promote the diffusi

  19. Catalytic Functions of Standards

    NARCIS (Netherlands)

    K. Blind (Knut)

    2009-01-01

    textabstractThe three different areas and the examples have illustrated several catalytic functions of standards for innovation. First, the standardisation process reduces the time to market of inventions, research results and innovative technologies. Second, standards themselves promote the

  20. Improved efficiency of extraction of polycyclic aromatic hydrocarbons (PAHs) from the National Institute of Standards and Technology (NIST) Standard Reference Material Diesel Particulate Matter (SRM 2975) using accelerated solvent extraction.

    Science.gov (United States)

    Masala, Silvia; Ahmed, Trifa; Bergvall, Christoffer; Westerholm, Roger

    2011-12-01

    The efficiency of extraction of polycyclic aromatic hydrocarbons (PAHs) with molecular masses of 252, 276, 278, 300, and 302 Da from standard reference material diesel particulate matter (SRM 2975) has been investigated using accelerated solvent extraction (ASE) with dichloromethane, toluene, methanol, and mixtures of toluene and methanol. Extraction of SRM 2975 using toluene/methanol (9:1, v/v) at maximum instrumental settings (200 °C, 20.7 MPa, and five extraction cycles) with 30-min extraction times resulted in the following elevations of the measured concentration when compared with the certified and reference concentrations reported by the National Institute of Standards and Technology (NIST): benzo[b]fluoranthene, 46%; benzo[k]fluoranthene, 137%; benzo[e]pyrene, 103%; benzo[a]pyrene, 1,570%; perylene, 37%; indeno[1,2,3-cd]pyrene, 41%; benzo[ghi]perylene, 163%; and coronene, 361%. The concentrations of the following PAHs were comparable to the reference values assigned by NIST: indeno[1,2,3-cd]fluoranthene, dibenz[a,h]anthracene, and picene. The measured concentration of dibenzo[a,e]-pyrene was lower than the information value reported by the NIST. The measured concentrations of other highly carcinogenic PAHs (dibenzo[a,l]pyrene, dibenzo[a,i]pyrene, and dibenzo[a,h]pyrene) in SRM 2975 are also reported. Comparison of measurements using the optimized ASE method and using similar conditions to those applied by the NIST for the assignment of PAH concentrations in SRM 2975 indicated that the higher values obtained in the present study were associated with more complete extraction of PAHs from the diesel particulate material. Re-extraction of the particulate samples demonstrated that the deuterated internal standards were more readily recovered than the native PAHs, which may explain the lower values reported by the NIST. The analytical results obtained in the study demonstrated that the efficient extraction of PAHs from SRM 2975 is a critical requirement for the

  1. Application of open source standards and technologies in the http://climate4impact.eu/ portal

    Science.gov (United States)

    Plieger, Maarten; Som de Cerff, Wim; Pagé, Christian; Tatarinova, Natalia

    2015-04-01

    automatically generates a graphical user interface on WPS endpoints. The WPS calculates climate indices and subset data using OpenClimateGIS/ICCLIM on data stored in ESGF data nodes. Data is then transmitted from ESGF nodes over secured OpenDAP and becomes available in a new, per user, secured OpenDAP server. The results can then be visualized again using ADAGUC WMS. Dedicated wizards for processing of climate indices will be developed in close collaboration with users. The second one is to expose climate4impact services, so as to offer standardized services which can be used by other portals. This has the advantage to add interoperability between several portals, as well as to enable the design of specific portals aimed at different impact communities, either thematic or national, for example.

  2. The Construction Technology of Fast and Standardized Formwork%快速、标准化支模架施工技术

    Institute of Scientific and Technical Information of China (English)

    金学胜; 宋千军; 黎争

    2014-01-01

    支模架施工技术的标准化构件可以动态调节楼板标高,保证施工质量。另外,其承擦式连接又节省了大量的钢管、扣件,减少了材料的损耗,节约了人工及工期。%The standardized component of formwork constr-uction technology can dynamicaly adjust the floor elevation and ensure the quality of construction. And the eraser type connection saves a lot of steel tube and fastener, reduces the material consumption and saves the manpower and time.

  3. 浅议海洋科技专著中地图的规范化%Map Standardization in Marine Technology Monograph

    Institute of Scientific and Technical Information of China (English)

    白燕; 彭珺

    2014-01-01

    The existing problems of maps are discussed and analyzed. It is believed that maps should meet the requirements of self -evident, abstract and simplistic. As for the map name, line graphs, and image maps, the suggestions of map standardization are proposed to improve maps' information transfer functions and visual effects in marine technology monographs.%讨论分析了目前海洋科技专著中地图所存在的问题,提出了地图应符合自明性、抽象性和简明性的要求,并针对图名、线划图和影像图提出地图制作的规范化建议,以便增强地图在海洋科技专著中的信息传递功能和视觉效果。

  4. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 1: Executive Summary, of a 15-Volume Set of Skills Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    Science.gov (United States)

    Texas State Technical Coll., Waco.

    The Machine Tool Advanced Skills Technology (MAST) consortium was formed to address the shortage of skilled workers for the machine tools and metals-related industries. Featuring six of the nation's leading advanced technology centers, the MAST consortium developed, tested, and disseminated industry-specific skill standards and model curricula for…

  5. Information and communication technologies for operating of smart distribution grids based on the German standardization roadmap; Informations- und Kommunikationstechnologien zur Betriebsfuehrung smarter Verteilungsnetze auf Basis der Deutschen Normungsroadmap

    Energy Technology Data Exchange (ETDEWEB)

    Brunner, Christoph [IT4Power, Zug (Switzerland); Buchholz, Bernd Michael [NTB Technoservice, Pyrbaum (Germany); Hampel, Herman [iAD GmbH, Grosshabersdorf (Germany); Naumann, A. [Magdeburg Univ. (Germany)

    2012-07-01

    The current challenges of the distribution networks are caused by a growing volume of distributed energy in-feed and new types of load. They require the introduction of information and communication technologies (ICT) down to the low voltage level. Innovative monitoring and control tasks are developed in the framework of the European lighthouse project ''Web2Energy'' (W2E) and performed in the practice of the 20/0.4 kV network of the HSE AG in Darmstadt. The overview of the realized functions is given and the related information exchange between the control centre and the distributed plants is considered. The project applies the standards IEC 61850 for data communication and IEC 61968/70 for the data management (CIM - Common Information Model) in the control center (CC). The client - server architecture of the developed communication system is considered in detail. The project related W2E CC serves the aspects of smart distribution also in the context with market activities. Data acquisition and control of the 20/0.4 kV terminals and the various power plants are executed by a mini remote terminal unit. The W2E RTU offers a 100 MBd Ethernet interface providing the IEC 61850 protocol for the access to the communication system. The required application specific extensions of the standards are discussed and the first experiences for application in the practice are demonstrated. (orig.)

  6. Education on standardization as an input to research on standardization : a success story

    NARCIS (Netherlands)

    Van de Kaa, G.

    2012-01-01

    At the faculty of Technology, Policy and Management, Delft University of Technology, The Netherlands, education about standardization focuses on market based standardization and particularly onfactors for standards battles. We have developed a general (award winning) course on technology and strateg

  7. Collaborative guarded-hot-plate tests between the Laboratoire national de métrologie et d’essais and the National Institute of Standards and Technology

    Science.gov (United States)

    Zarr, Robert R.; Guthrie, William F.; Hay, Bruno; Koenen, Alain

    2017-02-01

    A collaborative study to compare the long-term measurement performance between guarded-hot-plate facilities at the Laboratoire national de métrologie et d’essais (LNE) in France and the National Institute of Standards and Technology (NIST) in the United States is presented. Thermal conductivity data were compiled from three international comparisons organized from 1997 to 2014. Measurements were conducted in accordance with standardized test methods (ISO 8302 or ASTM C 177) over a temperature range from 280 K to 320 K. Nine thermal insulating materials (either mineral fiber or expanded polystyrene) were examined covering broad ranges of bulk densities (13 kg · m-3-200 kg · m-3) and thicknesses (13 mm-70 mm). A different set of specimens was utilized for each comparison. Results of this study indicate that, over a 17 year interval, the majority of test data from LNE and NIST agreed to within  ±1.0%, or less, for mineral fiber materials and to within  ±0.5%, or less, for expanded polystyrene. The long-term variability limit of 1% between the two laboratories is in good agreement with their current measurement uncertainties. Regression coefficients and their standard uncertainties for a straight-line model relating thermal conductivity to temperature from 280 K to 320 K were computed by material and laboratory. Graphical analysis of the data and corresponding fits exhibit consistent behavior by material type between the two laboratories. Sources of measurement variability are addressed.

  8. The Research on Definition and Classification Standard of Technology-Based Small and Medium Enterprises in China%我国科技型中小企业定义及划型标准的研究

    Institute of Scientific and Technical Information of China (English)

    陈志军; 温洲; 李享

    2016-01-01

    Through analyzing and comparing the classification standards of technology-based companies, hi-tech companies, and small and medium enterprises, this paper proposes the definition of technology-based small and medium enterprises (hereinafter shortened as SMEs). Three key factors of the technology-based SMEs are identified and examined: the personnel engaged in science and technology activities, input into science and technology activities and the science and technology output. Finally, the paper goes on to propose the classification standards of technology-based SMEs in China, based on the threshold evaluation methodology. Furthermore, the classification standards of technology-based SMEs are differentiated between national level and provincial level, according to actual conditions respectively.%本文通过对科技型企业、高新技术企业和中小企业的界定指标进行研究分析,提出科技型中小企业的定义,重点分析了科技型中小企业的三大核心要素(科技人员、科技投入和科技产出)。在此基础上,研究提出基于划线评价法的我国科技型中小企业划型标准,并明确细分为国家级和省级科技型中小企业划型标准。

  9. 橡胶标准化生产管理技术探讨%Discussion of Standardized Production Management Technology of Rubber

    Institute of Scientific and Technical Information of China (English)

    莫纯正; 李学进; 陈江明

    2011-01-01

    根据科学发展观的要求和农垦总局的指示精神,结合农场的实际,总结“十一五”标准化生产管理实施的成果与经验,按照总体布局、重抓主业、以点带面、形成网络、分步推进、务实协作的原则,不断开创科技创新新局面,提高科技成果转化能力。积极迎合“十二五”规划的新要求,改变生产发展模式,加快传统生产体系的科技创新与改革等.均对广东省阳江市阳东县红五月农场橡胶标准化生产的进一步完善、加快实现现代化农业生产进程有重要的现实意义。%According to the requirements of the scientific outlook on development and the spirit of the instructions of the general reclamation, along with the experience in farms, and summing up the "the eleventh five-year plan" standardized production management implementation results and experience, in accordance with the overall layout, grasping the main, fanning out from point to area, forming a network, step-by-step advancing pragmatic cooperation, the principle of innovation of science and technology, we should constantly create a new situation, raise achievement of science and technology transformation ability. Actively to meet the "12th Five-Year Plan" requirement, change the production mode of development, speed up the traditional production system of science and technology innovation and reform is of practically significance the standardization production perfection further and acceleration of implementation modernization of agricultural production process.

  10. The Role and Status of Standardization Document Service Organizations in Promoting Enterprises Technological Innovation%试论标准化文献服务机构在企业技术创新中的作用和地位

    Institute of Scientific and Technical Information of China (English)

    潘薇; 胡雄伟

    2011-01-01

    The standardization is an important driving force and significant part of enterprises technological innovation. It is necessary to make some in depth research on the relationship between standardization and enterprises technological innovation. Through introduction of the practice and development of foreign standardization activities and the situation of China's innovation policy system, the paper emphasizes the role and status of standardization document service organizations in promoting enterprises technological innovation. By fully exerting the activity of standard document services, and deep mining, accessing and using the standardization information resources, the process of China's enterprises standardization will be greatly promoted.%文章中重点指出标准化是企业技术创新的重要推动力和重要组成部分,深入探讨标准化与企业技术创新的相互关系具有重要的意义.通过介绍国外标准化的实践与发展,以及我国的创新政策体系现状,着重强调了标准化文献服务机构在推动企业技术创新中的作用和地位,充分发挥标准文献服务的作用,深度挖掘和利用标准文献资源,将极大地推进我国企业标准化进程.

  11. Crowdsourcing, citizen sensing and Sensor Web technologies for public and environmental health surveillance and crisis management: trends, OGC standards and application examples

    LENUS (Irish Health Repository)

    Kamel Boulos, Maged N

    2011-12-21

    Abstract \\'Wikification of GIS by the masses\\' is a phrase-term first coined by Kamel Boulos in 2005, two years earlier than Goodchild\\'s term \\'Volunteered Geographic Information\\'. Six years later (2005-2011), OpenStreetMap and Google Earth (GE) are now full-fledged, crowdsourced \\'Wikipedias of the Earth\\' par excellence, with millions of users contributing their own layers to GE, attaching photos, videos, notes and even 3-D (three dimensional) models to locations in GE. From using Twitter in participatory sensing and bicycle-mounted sensors in pervasive environmental sensing, to creating a 100,000-sensor geo-mashup using Semantic Web technology, to the 3-D visualisation of indoor and outdoor surveillance data in real-time and the development of next-generation, collaborative natural user interfaces that will power the spatially-enabled public health and emergency situation rooms of the future, where sensor data and citizen reports can be triaged and acted upon in real-time by distributed teams of professionals, this paper offers a comprehensive state-of-the-art review of the overlapping domains of the Sensor Web, citizen sensing and \\'human-in-the-loop sensing\\' in the era of the Mobile and Social Web, and the roles these domains can play in environmental and public health surveillance and crisis\\/disaster informatics. We provide an in-depth review of the key issues and trends in these areas, the challenges faced when reasoning and making decisions with real-time crowdsourced data (such as issues of information overload, "noise", misinformation, bias and trust), the core technologies and Open Geospatial Consortium (OGC) standards involved (Sensor Web Enablement and Open GeoSMS), as well as a few outstanding project implementation examples from around the world.

  12. Crowdsourcing, citizen sensing and sensor web technologies for public and environmental health surveillance and crisis management: trends, OGC standards and application examples

    Directory of Open Access Journals (Sweden)

    Kamel Boulos Maged N

    2011-12-01

    Full Text Available Abstract 'Wikification of GIS by the masses' is a phrase-term first coined by Kamel Boulos in 2005, two years earlier than Goodchild's term 'Volunteered Geographic Information'. Six years later (2005-2011, OpenStreetMap and Google Earth (GE are now full-fledged, crowdsourced 'Wikipedias of the Earth' par excellence, with millions of users contributing their own layers to GE, attaching photos, videos, notes and even 3-D (three dimensional models to locations in GE. From using Twitter in participatory sensing and bicycle-mounted sensors in pervasive environmental sensing, to creating a 100,000-sensor geo-mashup using Semantic Web technology, to the 3-D visualisation of indoor and outdoor surveillance data in real-time and the development of next-generation, collaborative natural user interfaces that will power the spatially-enabled public health and emergency situation rooms of the future, where sensor data and citizen reports can be triaged and acted upon in real-time by distributed teams of professionals, this paper offers a comprehensive state-of-the-art review of the overlapping domains of the Sensor Web, citizen sensing and 'human-in-the-loop sensing' in the era of the Mobile and Social Web, and the roles these domains can play in environmental and public health surveillance and crisis/disaster informatics. We provide an in-depth review of the key issues and trends in these areas, the challenges faced when reasoning and making decisions with real-time crowdsourced data (such as issues of information overload, "noise", misinformation, bias and trust, the core technologies and Open Geospatial Consortium (OGC standards involved (Sensor Web Enablement and Open GeoSMS, as well as a few outstanding project implementation examples from around the world.

  13. Fuel-cell technology for vehicular applications; L`introduzione delle pile a combustibile nel settore dei trasporti: proposte, standard e normative per sistemi di bordo ed impianti

    Energy Technology Data Exchange (ETDEWEB)

    Ciancia, A.; Pede, G.; Marmigi, R. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dip. Energia

    1998-12-31

    The fuel-cell technology applied to engines for vehicular applications grants broad margins of convenience over any known alternative engine for what concerns the compliance with any present and foreseeable environmental and energy saving regulations. On the other hand, the use of hydrogen produced on board from fuels or stored as a liquid or a gas, raises new problems from the point of view of safety regulations and standards both in the design and use of vehicles and in the fuel production and distribution. The present work is aimed at pointing out the above main safety problems, describes the technical-choices together with their technical grounds, in the framework of the italian and U E standards and regulations. The report is then made up of three parts. The initial section where the on board storage of the fuel from technical-economical point of view is discussed. with particular reference to the compressed hydrogen, the second describing the regulations and standards holding in the field of on board pressure equipment and reporting the ongoing ENEA`s activities in the field. The final part is devoted to the distribution and supply of the fuels to the fuel cell powered electric vehicles. [Italiano] La tecnologia delle celle a combustibile, impiegata nella realizzazione dei propulsori dei veicoli elettrici, conferisce ad essi ampi margini di vantaggio su ogni altro tipo di motorizzazione per quanto riguarda le attuali e prevedibili future normative ambientali e di risparmio energetico. Il presente rapporto si propone di evidenziare alcuni tra questi problemi ed esporre e motivare le soluzioni tecniche previste nell`ambito degli specifici programmi dell`ENEA, in un contesto normativo di riferimento nazionale e comunitario. Il rapporto si compone pertanto di tre parti: una parte iniziale dove e` affrontato dal punto di vista tecnico-economico il problema del trasporto del combustibile a bordo con particolare riferimento all`idrogeno compresso, una seconda in cui

  14. Research on the methods and standard of 3 d technology design for sheet metal parts%钣金件三维工艺设计方法及标准研究

    Institute of Scientific and Technical Information of China (English)

    程五四; 曾祥宇

    2015-01-01

    At present, sheet metal technology information expression by MBD( Model Based Definition) is the hot issue, but the standard is still in the blank .In view of the key technology of 3d technology design for sheet metal parts, it introduces the draft standard for electronic industry , expounds the main technical contents of the 3 d standard in detail .The application of standard can ensure the sheet metal technology information expression , and realize the effectively protect and the rapid development of 3d technology design for sheet metal parts .%根据钣金件三维工艺设计关键技术,总结提炼出3项电子行业标准草案,并详细阐述了标准的主要技术内容. 通过标准的应用,实现在三维模型上的电子装备钣金工艺信息的表达,确保基于模型定义的钣金工艺信息表达的规范性、通用性,有效保障和促进基于模型定义的三维钣金工艺设计技术的快速发展.

  15. 科技论文参考文献规范综述*%Review of Standardization of References in Scientific and Technological Papers

    Institute of Scientific and Technical Information of China (English)

    袁军鹏; 宿洁

    2013-01-01

      文章针对一些科技期刊论文在参考文献方面存在的问题,论述了参考文献的意义和作用、参考文献的内在质量和引用原则,并对参考文献的文内标注和文后著录规范进行了梳理和概括,对某些具体细则作了必要的改进,为论文作者和科技期刊编辑进一步做好参考文献工作提供有益的帮助。%There exist several problems in the references of the scientific and technological papers, such as omission of some items, too many contents in extractions, and wrong extractions. This paper discusses the significance and role of the reference, the intrinsic quality of the reference and the principle of reference. The article sorts and summarizes the standardization of in-text citations and bibliographic references, and improves some specific details, in order to provide useful help for authors and journal editors to do a bet er job.

  16. 基于指纹识别技术的标准化考试系统研究%The Standardized Test System Based on Fingerprint Identification Technology

    Institute of Scientific and Technical Information of China (English)

    吴桂玲; 张耀军

    2014-01-01

    把指纹识别技术应用到标准化考试系统中,利用考生的指纹特征来判定考生的真实身份。通过指纹终端设备获取考生的指纹信息,与系统指纹库中的信息进行比对,来识别考生身份的真实性、有效性,实现考生的身份认证。从而可以在技术上杜绝考试中的替考现象,提升考试的公平性。%The fingerprint recognition technology is applied to the standardized test system , using the fingerprint features to determine the examinee's true identity.The fingerprint of examinee is obtained using the fingerprint terminal equipment and then is compared with the information of the fingerprint database to determine the authenticity and validity of the examinee identification .This system can put an end to so many ghostwriters in the exam , and enhance the fairness of examination .

  17. Crowdsourcing, citizen sensing and Sensor Web technologies for public and environmental health surveillance and crisis management: trends, OGC standards and application examples

    Energy Technology Data Exchange (ETDEWEB)

    Kamel Boulos, Maged; Resch, Bernd; Crowley, David N.; Breslin, John G.; Sohn, Gunho; Burtner, Edwin R.; Pike, William A.; Jeziersk, Eduardo; Slayer Chuang, Kuo Yu

    2011-12-21

    The PIE Activity Awareness Environment is designed to be an adaptive data triage and decision support tool that allows role and activity based situation awareness through a dynamic, trainable filtering system. This paper discusses the process and methodology involved in the application as well as some of its capabilities. 'Wikification of GIS by the masses' is a phrase-term first coined by Kamel Boulos in 2005, two years earlier than Goodchild's term 'Volunteered Geographic Information'. Six years later (2005-2011), OpenStreetMap and Google Earth (GE) are now full-fledged, crowdsourced 'Wikipedias of the Earth' par excellence, with millions of users contributing their own layers to GE, attaching photos, videos, notes and even 3-D (three dimensional) models to locations in GE. From using Twitter in participatory sensing and bicycle-mounted sensors in pervasive environmental sensing, to creating a 100,000-sensor geo-mashup using Semantic Web technology, to the 3-D visualisation of indoor and outdoor surveillance data in real-time and the development of next-generation, collaborative natural user interfaces that will power the spatially-enabled public health and emergency situation rooms of the future, where sensor data and citizen reports can be triaged and acted upon in real-time by distributed teams of professionals, this paper offers a comprehensive state-of-the-art review of the overlapping domains of the Sensor Web, citizen sensing and 'human-in-the-loop sensing' in the era of the Mobile and Social Web, and the roles these domains can play in environmental and public health surveillance and crisis/disaster informatics. We provide an in-depth review of the key issues and trends in these areas, the challenges faced when reasoning and making decisions with real-time crowdsourced data (such as issues of information overload, 'noise', misinformation, bias and trust), the core technologies and Open Geospatial

  18. Evaluation of the Skills of K-12 Students Regarding the National Educational Technology Standards for Students (NETS*S) in Turkey

    Science.gov (United States)

    Kurt, Adile Askim; Çoklar, Ahmet Naci; Kiliçer, Kerem; Yildirim, Yusuf

    2008-01-01

    The goal of teaching technology used in every field of daily life as well as in every stage of education, is to have individuals acquire the necessary skills in technology use. In this era, these skills are among the essentials for individuals to discover the world with the help of technology. This study was carried out on students who completed…

  19. Standardization Promotes Midea Industrial Upgrading

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    1.Midea Achievenents in standardization For a long time,Midea attaches high importance to the implementation of standardization.After four decades development,Midea has accumulated advantages in manufacturing,technology,market and personnel to some extent,which form Midea's strategic foundation of enterprise standardization.In 2006,the Group set up the Science & Technology Management Department,enhanced the standardization management function to the Group and made standardization management the more specialized and systemized.

  20. Standard NIM instrumentation system

    CERN Document Server

    1990-01-01

    NIM is a standard modular instrumentation system that is in wide use throughout the world. As the NIM system developed and accommodations were made to a dynamic instrumentation field and a rapidly advancing technology, additions, revisions and clarifications were made. These were incorporated into the standard in the form of addenda and errata. This standard is a revision of the NIM document, AEC Report TID- 20893 (Rev 4) dated July 1974. It includes all the addenda and errata items that were previously issued as well as numerous additional items to make the standard current with modern technology and manufacturing practice.

  1. International standards in metallurgy

    Institute of Scientific and Technical Information of China (English)

    Fomina; O.; N.

    2005-01-01

    The existence of incompatible standards in many technical fields represents a technical barrier to international cooperation between enterprises in different countries in the manufacture of high technology products.……

  2. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 11: Computer-Aided Manufacturing & Advanced CNC, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    Science.gov (United States)

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  3. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 13: Laser Machining, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    Science.gov (United States)

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  4. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 14: Automated Equipment Technician (CIM), of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    Science.gov (United States)

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  5. Live Working Technology Research and Standards Formulation%带电作业技术研究与标准制定

    Institute of Scientific and Technical Information of China (English)

    胡毅; 刘凯; 刘庭; 肖宾

    2012-01-01

    随着我国电网的快速发展和供电可靠性要求的不断提高,与之相适应的带电作业技术的研究及标准制定工作有了新的发展和突破。针对超/特高压输电线路电压高、尺寸大等特点,在过电压水平分析、真型塔典型工况试验的基础上通过危险率计算确定了带电作业安全间距值,分析了带电作业电场分布的特点和直流线路电晕区对导体表面场强的抑制作用,确定了各电压等级专用屏蔽服的要求和其他防护措施。论述了配电带电作业尤其是不停电作业的相关情况,介绍了不停电作业的基本原理和主要设备及其要求,讨论了旁路电流分流、旁路变压器参数匹配、旁路设备投切时的暂态过电压等不停电作业关键问题。介绍了IEC带电作业标准化工作情况和我国带电作业标准的制定情况及新要求。根据目前情况,结合我国实际,提出了今后应进一步深入研究的问题。%According to the rapid development of power grid and the increasing requirements for power supply reliability in China,significant development has been made to the live working technology and standards formulation.In this paper,considering the higher voltage,the relatively large size and other characteristics of the EHV and UHV transmission lines,the minimum approach distances(MAD)for live working were obtained by risk rate calculation,which is based on the analysis of over-voltage level of live working and the experiment of typical working positions.The distribution characteristics of the electric field and the inhibition of electric field by the DC line corona were also discussed.Then the requirements of the screen clothes and other protective measures were proposed.After discussing the live working on distribution lines and especially under operating situation,the basic principles and main equipments and their requirements for bypass work were described.Then some key issues in live working on

  6. Essential Patents and Coordination Mechanisms : The effects of patent pools and industry consortia on the interplay between patents and technological standards

    OpenAIRE

    Baron, Justus; Pohlmann, Tim

    2010-01-01

    CERNA WORKING PAPER SERIES 2010-13; This article investigates the interplay between formal standards, essential patents and informal industry alliances such as consortia and patent pools. Building upon more than 6.200 declarations of essential patents to major international Standard Development Organizations (SDO), we investigate how informal standardization consortia and patent pools influence the number and timing of patent declarations to formal SDOs. This is the first thorough empirical i...

  7. 4G Standards

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ China plans to submit homegrown fourth-generation (4G) mobile technology standards to the International Telecommunications Union (ITU) between 2008 and 2009, according to Wen Ku, director of the Department of Science and Technology at the Ministry of Information Industry.

  8. Standardization in Beijing Opera

    Institute of Scientific and Technical Information of China (English)

    Liu Zhiyang

    2012-01-01

    Beijing Opera is the treasure of Chinese traditional dramatic arts.More than 200 years of artistic practice is the process that makes it mature and standardized.Although it is not described by standardized academic terminologies,all the performances of 'Chang (Singing)','Nian(Speaking)','Zuo (Acting)' and 'Da (Fighting)' have been following standardization requirement which is called "Chengshi (pattem)" in professional language or "Fan'er" in jargou,literally meaning a standard pattern.The pattern is the an technology format which is refined and summarized in accordance with the beautify principles from natural forms of things in life and then standardized to be the commonly adhered.

  9. Workflow automation architecture standard

    Energy Technology Data Exchange (ETDEWEB)

    Moshofsky, R.P.; Rohen, W.T. [Boeing Computer Services Co., Richland, WA (United States)

    1994-11-14

    This document presents an architectural standard for application of workflow automation technology. The standard includes a functional architecture, process for developing an automated workflow system for a work group, functional and collateral specifications for workflow automation, and results of a proof of concept prototype.

  10. Experience in the use of production-oriented training technology in the specialist preparation in the field of "Standardization and Metrology"

    Directory of Open Access Journals (Sweden)

    Loganina Valentina

    2016-03-01

    Full Text Available This article provides information about the experience of the use of production-oriented technology when training specialists and the benefits of its use in the educational process. The procedure of educational technology implementation, its advantages and features of the application is described in detail.

  11. Using Postman and de Bono as Guiding Principles in an Interdisciplinary Standards Based Approach to Technology Analysis for Secondary School Students.

    Science.gov (United States)

    Jervis, Charles K.

    This paper describes a technology assessment curriculum developed at Auburn High School (Virginia). The program was used in Honors Biology and General Chemistry classes and is based on Neil Postman's ten principles of interaction between technology and society and Edward de Bono's "Six Thinking Hats," a system of approaching a problem…

  12. 76 FR 7817 - Announcing Draft Federal Information Processing Standard 180-4, Secure Hash Standard, and Request...

    Science.gov (United States)

    2011-02-11

    ... National Institute of Standards and Technology Announcing Draft Federal Information Processing Standard 180... Draft Federal Information Processing Standard (FIPS) 180-4, Secure Hash Standard (SHS), for public... sent to: Chief, Computer Security Division, Information Technology Laboratory, Attention: Comments...

  13. Design of an adaptive LNA for hand‐held devices in a 1‐V 90‐nm standard RF CMOS technology: From circuit analysis to layout

    Directory of Open Access Journals (Sweden)

    Edwin Becerra‐Álvarez

    2009-04-01

    Full Text Available This paper deals the design of a reconfigurable Low‐Noise Amplifier (LNA for the next generation of wireless hand‐held devicesby using a lumped circuit approach based on physical laws. The purpose is not only to present simulation results showing thefulfillment of different standard specifications, but also to demonstrate that each design step has a physical meaning such thatthe mathematical design flow is simple as well as suitable for hand‐work in both laboratory and classroom. The circuit underanalysis, which is designed according to technological design rules of a 90nm CMOS technology, is a two‐stage topologyincluding inductive‐source degeneration, MOS‐varactor based tuning networks, and programmable bias currents. This proposal,with reduced number of inductors and minimum power dissipation, adapts its performance to different standard specifications;the LNA is designed to cope with the requirements of GSM (PCS1900, WCDMA, Bluetooth and WLAN (IEEE 802.11b‐g. In orderto evaluate the effect of technology parasitics on the LNA performance, simulation results demonstrate that the LNA featuresNF16dB, S11‐3.3 dBm over the 1.85‐2.48 GHz band. For all the standards understudy the adaptive power consumption varies from 25.3 mW to 53.3mW at a power supply of 1‐V. The layout of thereconfigurable LNA occupies an area of 1.8mm2.

  14. Padrões tecnológicos e processo de inovação de produtos: o caso da Itautec-Philco S.A. Technology standards and product innovation process: the case of itautec-philco

    Directory of Open Access Journals (Sweden)

    Dionisio dos Santos Júnior

    2000-08-01

    Full Text Available O objetivo deste trabalho é apresentar e discutir a influência dos padrões tecnológicos no processo de inovação de produtos da indústria de computadores, focalizando o caso em que se tem de lidar com padrões já estabelecidos. Com este fim foi estudado o processo de definição de produtos da linha de microcomputadores fabricados pela Itautec-Philco S.A. O trabalho mostra que os padrões tecnológicos da indústria devem ser cuidadosamente considerados nas análises das decisões de projeto da empresa, pois condicionam as direções e os ritmos das estratégias tecnológicas e das mudanças técnicas implementadas.This article seeks to illustrate the influence of technology standards in the process of product innovation. An analysis of the situation in which firms have to deal with industry standards already established was carried out as well as the analysis of the product definition process of the microcomputer line developed by Itautec-Philco S.A, a Brazilian computer company. This article shows that computer technology standards are a core element to consider in the analysis of the project decisions, because they condition directions and rates of technology strategies and technical changes implemented.

  15. Report on achievements in fiscal 1999 on the project for research and development of an intellectual base creating and utilizing technology. Research and development of standard substances related to internal secretion disturbing chemical substances (researches on preservation stability and the valuing methods related to pure substance standard substances, mixed standard substances and composition type standard substances); 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu seika hokokusho. Naibunpi kakuran kagaku busshitsu kanren hyojun busshitsu no kenkyu kaihatsu (junbusshitsu hyojun, kongo hyojun oyobi soseigata hyojun busshitsu ni kakawaru hozon anteisei, nezuke hoho nado ni tsuite no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on researching and developing standard substances related to internal secretion disturbing chemical substances. Environmental contamination due to environmental hormones has a large number of scientifically unclear points. These points are related to the basic conditions for the existence of living organisms, whereas serious impacts transcending the generations are feared. In addition, the environmental hormones have been observed in water quality, water bottom quality, and living environments for aquatic animals. Standardization in technologies to measure them, and arrangement of standard substances are demanded strongly. Based on these circumstances, evaluations were given on the following matters: determination of purity of the reference substances with regard to the standard solutions of di-2-ethyl hexyl phthalate, di-n-butyl phthalate, and diethyl phthalate among the standard substances required for the measurement, establishment of methods for measuring impurities and preparing the standard solutions, establishment of the methods to measure concentrations of the standard solutions, and the preservation stability of the standard solutions. As a result, standard solutions with accurate concentrations and excellent stability were developed. In addition, development was performed on the composition type standard substance for which a certified value was given to PCB in soil. (NEDO)

  16. [COMPUTER TECHNOLOGY FOR ACCOUNTING OF CONFOUNDERS IN THE RISK ASSESSMENT IN COMPARATIVE STUDIES ON THE BASE OF THE METHOD OF STANDARDIZATION].

    Science.gov (United States)

    Shalaumova, Yu V; Varaksin, A N; Panov, V G

    2016-01-01

    There was performed an analysis of the accounting of the impact of concomitant variables (confounders), introducing a systematic error in the assessment of the impact of risk factors on the resulting variable. The analysis showed that standardization is an effective method for the reduction of the shift of risk assessment. In the work there is suggested an algorithm implementing the method of standardization based on stratification, providing for the minimization of the difference of distributions of confounders in groups on risk factors. To automate the standardization procedures there was developed a software available on the website of the Institute of Industrial Ecology, UB RAS. With the help of the developed software by numerically modeling there were determined conditions of the applicability of the method of standardization on the basis of stratification for the case of the normal distribution on the response and confounder and linear relationship between them. Comparison ofresults obtained with the help of the standardization with statistical methods (logistic regression and analysis of covariance) in solving the problem of human ecology, has shown that obtaining close results is possible if there will be met exactly conditions for the applicability of statistical methods. Standardization is less sensitive to violations of conditions of applicability.

  17. The Publication and Distribution of Chinese Standards and Other Standards-related Products

    Institute of Scientific and Technical Information of China (English)

    Bai Demei

    2005-01-01

    @@ Standards Press of China (SPC), founded in October 1963, is the only publication center in China licensed to publish national standards, trade standards, and books concerned with standardization, quality, and other science and technology. The main publications are as following:

  18. Development and application of the informational and communication technologies in quality standards of health care management for patients with arterial hypertension.

    Science.gov (United States)

    Smііanov, V; Smiianova, O; Tarasenko, S

    2014-01-01

    Mobile health technologies improve the quality of health care service. The information and communication technology is developed and applied to remind patients with arterial hypertension to follow medical recommendations. The feedback system from general practitioners was developed (the reminder system for patients sending the feedbacks). It helped to supervise follow-up patients online. Suggested system provides for forming the database for summarized analysis of online survey of the patients, who receive medical care at health care institution, to take managerial decisions concerning the improvements of medical services quality. Evaluation of efficiency of the applied technology assured that the number of patients, who checked regularly his/her arterial pressure, increased by 31.00%. The number of patients, who visited doctors for preventive purpose two or more times during given year, rose by 18.24%. The number of patients with target pressure grew by 24.51% and composed 38.55±4.26%.

  19. Standardization Practices of Gree

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    1.The great importance attached by the company's executives is a strong guarantee for leap-forward development of standardization.To give play to the strategic role of standards in supporting the long-term and sustainable development of the enterprise,the company's management has attached great importance to the standardization work and provided strong capital support and guarantee of resources in standardization.Continuously improve the requirements of corporate technical standards and reliability quality control means,develop core technologies with independent intellectual property rights,continuously achieve major breakthroughs in key technologies and successfully apply to the company's products to help the enterprises maintain rapid and steady development in the market of household electrical appliances with extremely intense competition,achieve remarkable economic and social benefits for the company,and provide strong support for leap-forward development of standardization work.The company has successively and independently developed a series of highend products and technologies which are intemationally advanced.So far,the company has 10 innovations included in the national science and technology programs.

  20. JB/T4730.11射线数字成像标准制定的关键技术探讨%The Key Technology Discussing of JB/T 4730. 11 Digital Radiography Standard Setting

    Institute of Scientific and Technical Information of China (English)

    梁丽红

    2011-01-01

    In order to popularize application of digital radiography technology in the special equipment field, and promote the special inspecting level in nondestructive testing industry, improve the efficiency of special equipment inspecting, and reduce the inspecting complexity for staff, and decrease environmental pollution. The advanced technology of digital radiography should be masted and the relevant testing standards should be established. Some key technologies of standards setting include: ① The components of digital radiography system in standards. ② The differences of image quality evaluation between digital radiography and film radiography. ③ The consistency and equivalence between digital radiography and film radiography. ④other technologies should be concerned in digital radiography.%为在特种设备行业推广和应用射线数字成像检测技术。提高特种设备检测效率、降低检测人员的工作强度、减少环境污染,提升特检行业的无损检测水平,必须掌握先进的数字成像检测技术,制定相关的检测标准。以下是标准制定的几个关键问题:①标准包含的射线数字成像检测系统及其内容。②数字成像与胶片照相像质评价指标的区别。③数字成像与胶片照相像质的等效问题。④数字成像技术应用应关注的其它问题。

  1. 我国体育用品产业技术标准战略问题研究%Research on the Technological Standard Strategy of the Sports Goods Industry

    Institute of Scientific and Technical Information of China (English)

    刘富生; 钟丽

    2012-01-01

    目前,体育用品产业的技术标准战略已上升到国家竞争的层面。但长期以来,标准少、水平低、标龄长等问题直接制约着我国体育用品总体质量水平的提高,影响着"中国制造"体育用品品牌的国际竞争力,尽快规范、完善我国体育用品的标准化体系,加快与国际标准接轨的步伐已经成为体育产业迫在眉睫的大事。通过分析技术标准的基本内涵、功能及作用,以及我国体育用品产业技术标准的现状及存在的主要问题,针对性地提出了我国实施体育用品技术标准战略的策略及建议。%At present,the technological standard strategy of the sports goods industry is in the national competitive level.While for a long period of time,the quality improvement of the sports goods is restricted by few standards,low-level,aged-mark and etc.,which affects the competitive ability of the made-in-China sport goods in the world.It is extremely urgent to standardize and improve the standardization system of the sports goods,and hasten integration with the international standard.This article analyzes the basic connotation,function of the technological standard,as well as the present situation and the major problems of technological standard of the sports good industry, putting forward with a clear aim the strategy and advice.

  2. The Introduction of Innovative Educational Technologies in the Personnel Training Process for Sport and Tourism Industries through the Application of Professional Standards

    Science.gov (United States)

    Zaitseva, Natalia A.; ?ndryushchenko, Lilia ?.

    2016-01-01

    The relevance of the research stems from the importance of modernization of the system of training for sport and tourism, without which the intensive development of this kind of professional activity is not possible. The aim of the study was the generalization of the experience of introduction of the innovative educational technologies in the…

  3. 肤纹研究中的技术标准和项目标准%Technological and Item Standards in Dermatoglyphics Research

    Institute of Scientific and Technical Information of China (English)

    张海国

    2012-01-01

    The Chinese Dermatoglyphics Association uses American Dermatoglyphics Association ADA standards,CDA edition and CDA standards,for method and project specification analysis. This CDA edition and CDA standards are inherited from the ADA standards system and its complements. According to the CDA,fingerprint analysis follows three systems of law,ridge-line tracking and other criteria,including sample model swatchs,,and ink print sample requirements.%中国肤纹学研究协作组规定的《ADA标准-CDA版本》和《CDA标准》,对肤纹研究做了分析技术和项目的规范.“CDA版本”和《CDA标准》是了继承《ADA标准》系统,并对其做了补充和完善.本文的指纹三个系统的分析法、嵴线追踪等内容,是谓“CDA版本”.“CDA版本”和“ADA标准”融合,形成《ADA标准-CDA版》,贯穿在我国民族肤纹研究过程之中.对《CDA标准》中的模式样本的概念,采样规定,3级模式样本的具体项目,都做了明确的表述.

  4. 76 FR 59659 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2011-09-27

    ... National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee), National Institute of Standards...

  5. 76 FR 29195 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2011-05-20

    ... National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of Public Meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee), National Institute of Standards...

  6. 77 FR 59592 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2012-09-28

    ... National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. ] SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee), National Institute of Standards...

  7. 78 FR 57839 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2013-09-20

    ... National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee), National Institute of Standards...

  8. 75 FR 60082 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2010-09-29

    ... National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of Public Meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT), National Institute of Standards and...

  9. 78 FR 29704 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2013-05-21

    ... National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of Public Meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or Committee), National Institute of Standards...

  10. 76 FR 2662 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2011-01-14

    ... National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of partially closed meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT), National Institute of Standards...

  11. 75 FR 28785 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2010-05-24

    ... National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of Partially Closed Meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT), National Institute of Standards...

  12. ['Gold standard', not 'golden standard'

    NARCIS (Netherlands)

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same w

  13. ['Gold standard', not 'golden standard'

    NARCIS (Netherlands)

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same

  14. 新生儿保温技术规范化管理的实践和建议%The Practice and Proposals for Standardized Management of Neonatal Insulation Technology

    Institute of Scientific and Technical Information of China (English)

    王溪; 熊英; 胡艳玲; 张学龙

    2012-01-01

    新生儿保温设备使用不当会造成的医疗事故.为了更好地规范该类设备的使用行为,根据新生儿保温技术和暖箱规范化管理的工作实践,提出了婴儿暖箱恒温恒湿技术要求、操作规范要求和管理规范要求,同时建议国家相关部门拟订"新生儿保温技术管理规范"及"暖箱技术和操作规范",目的是规范行业行为,保障医疗安全.%In clinical practice, incubators can contribute to better diagnosis and treatment of diseases. Currently, insulation medical equipments used for the newborn are mainly warm-boxes. With the use popularity of warm-boxes in the country, medical accidents caused by improper use are on the increase. According to neonatal insulation technology and standardized management of practice, this article puts forward technical requirements of infant incubators with constant temperature and humidity, operation regulations and management specifications to better regulate the use of such devices. Meanwhile, it also suggests national related departments to formulate " incubator technology management norms' and"warm-box technology and practice", intending to standardize industry behaviors and ensure medical safety.

  15. 3G Standards

    DEFF Research Database (Denmark)

    Saugstrup, Dan; Henten, Anders

    2006-01-01

    angles – technology, markets and economy, policy and regulation, and other social aspects. Findings – The paper concludes that WCDMA will dominate the markets, but that there will be a co-existence of different solutions – also inside individual countries where more than one solution is implemented......Purpose – The main purpose of this paper is to analyze which standard/technology will win the 3G mobile markets. In addition, two sub topics are examined. First, which kind of victory will it be – will one technological solution be all-dominating or is co-existence more likely? Second, which...... are the most decisive factors in the battle between the different standards – which roles do respectively technology path-dependence, network effects and strategic concerns play? Design/methodology/approach – The approach taken in the paper is to examine the different kinds of stakeholders – in this field...

  16. Point of care technology or standard laboratory service in an emergency department: is there a difference in time to action? A randomised trial

    DEFF Research Database (Denmark)

    Backer Mogensen, Christian; Borch, Anders; Brandslund, Ivan

    2011-01-01

    Emergency Departments (ED) have a high flow of patients and time is often crucial. New technologies for laboratory analysis have been developed, including Point of Care Technologies (POCT), which can reduce the transport time and time of analysis significantly compared with central laboratory...... services. However, the question is if the time to clinical action is also reduced if a decisive laboratory answer is available during the first contact between the patient and doctor. The present study addresses this question: Does a laboratory answer, provided by POCT to the doctor who first attends...... the patient on admission, change the time to clinical decision in commonly occurring diseases in an ED compared with the traditional service from a central laboratory?...

  17. Fiber optics standard dictionary

    CERN Document Server

    Weik, Martin H

    1997-01-01

    Fiber Optics Vocabulary Development In 1979, the National Communications System published Technical InfonnationBulle­ tin TB 79-1, Vocabulary for Fiber Optics and Lightwave Communications, written by this author. Based on a draft prepared by this author, the National Communications System published Federal Standard FED-STD-1037, Glossary of Telecommunications Terms, in 1980 with no fiber optics tenns. In 1981, the first edition of this dictionary was published under the title Fiber Optics and Lightwave Communications Standard Dictionary. In 1982, the then National Bureau of Standards, now the National Institute of Standards and Technology, published NBS Handbook 140, Optical Waveguide Communications Glossary, which was also published by the General Services Admin­ istration as PB82-166257 under the same title. Also in 1982, Dynamic Systems, Inc. , Fiberoptic Sensor Technology Handbook, co-authored and edited by published the this author, with an extensive Fiberoptic Sensors Glossary. In 1989, the handbook w...

  18. Quantitative and theoretical analysis of the joint Department of Energy-National Institute of Standards and Technology Energy-Related Inventions Program from 1975 to 1995: Implications for development of public policy toward innovation

    Science.gov (United States)

    Pevenstein, Jack Edward

    This dissertation presents 18 alternative models for computing the social rate of return (SRR) of the joint Department of Energy (DOE)-National Institute of Standards and Technology (NIST) Energy-Related Inventions Program (ERIP) from 1975 to 1995. The models differ on the on the choice of societal benefit, adjustments made to the benefits, accounting for initial investments in ERIP and annual program appropriations. Alternative quantitative measures of societal benefit include annual gross market sales of successfully commercialized ERIP-supported inventions, annual energy savings resulting from the use of such inventions, pollution-remediation cost reductions due to decreased carbon emissions from greenhouse gases associated with more efficient energy generation. SRR computation employs the net present value (NPV) model with the SRR being the discount rate that reduces the NPV of a stream of societal benefits to zero over a period of n years given an initial investment and annual program appropriations. The SRR is the total rate of return to the nation from public investment in ERIP. The data used for computation were assembled by Dr. Marilyn A. Brown and her staff at Oak Ridge National Laboratory under contract to DOE since 1985. Other data on energy use and carbon emission from greenhouse gas production come from official publications of DOE's Energy Information Administration. Mean ERIP SRR = 412.7% with standard deviation = +/-426.5%. The population of the SRR sample is accepted as normally distributed at an alpha = 0.05, using the Kolmogorov-Smirnov test. These SRR's, which appear reasonable in comparison with those computed by Professor Edwin Mansfield, (Wharton School) for inventions and by Dr. Gregory Tassey (NIST Chief Economist) for NIST programs supporting innovations in measurement technology, show a significant underinvestment in public service technology innovation evaluation programs for independent inventors and small technology

  19. Standardization Bossts SGGCC Fast Development

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    OverviewDuring the development of State Grid Corporation of China (SGCC),standardization work is always highlighted,adhering to standardization planning as a focus in standardization work,centered on technology R&D,grid construction,production & operation,industrial development,etc.,SGCC set up a technology standards system with production process as a main line and featured by "Vertical in the end,lateral to the edge",and launched STATE GRID Corporation of China of Technical Standards System.

  20. 物联网标准体系构建与技术实现策略的探究%Investigation of Standard System Construction and Technology Realization Strategy for the Internet of Things

    Institute of Scientific and Technical Information of China (English)

    黄玉兰

    2012-01-01

    物联网标准体系构建与技术实现策略应该既参考泛在网络总体框架的研究成果,又借鉴EPC系统的成功模式.本文辨析了物联网概念的内涵,分析了EPC系统的基本组成、标准体系和技术架构,通过EPC系统与传感网、泛在传感器网络的对比与分析,探讨了物联网标准体系构建和技术实现策略,提出了研究与发展建议.物联网需要从战略发展与具体应用的角度进行探讨,为中国物联网标准与技术体系的研究与构建提供参考.%Standard system construction and technology realization strategy for the Internet of Things (IOT) should refer to the ubiquitous network framework, but also should draw on the successful pattern of EPC system. The concept of IOT is discriminated, the basic components, standard system and technology framework of EPC system is analyzed. By comparison and analysis of EPC system, sensor networks and ubiquitous sensor network (USN), the standard and technology system of IOT is investigated, the suggestion of research and development are proposed. IOT should be investigated from the strategy and application point of view, the research contributes to the implementation of China IOT.

  1. Accounting standards

    NARCIS (Netherlands)

    Stellinga, B.; Mügge, D.

    2014-01-01

    The European and global regulation of accounting standards have witnessed remarkable changes over the past twenty years. In the early 1990s, EU accounting practices were fragmented along national lines and US accounting standards were the de facto global standards. Since 2005, all EU listed companie

  2. On Setting Skill Assessment Standard for Students of Electronic Measurement Technology in Higher Vocational Colleges%高职电子测量技术专业技能水平测评标准设计思考

    Institute of Scientific and Technical Information of China (English)

    杨少春

    2012-01-01

    In this paper, a standard is planned to set for assessing the skills of the students of electronic measure- ment technology after referring to the national vocational qualification standards. The skills assessment standard is in- tended to set collaboratively by colleges and related enterprises and in accordance with the vocational-education plan. The index of the standard covers three levels of skills -general skills, basic professional skills and professional skills. The detailed scheme of the standard contains the key points of content and requirement, module, project and assessment method. It is hoped that the scheme can have a certain reference value on comprehensive, scientific and standardized evaluation of the higher vocational students' comprehensive skills level.%参照国家职业资格标准、依据人才培养方案、按照校企合作共同制定评价标准的原则,拟设计高职电子测量技术专业技能水平测评标准。该测评标准的评价指标包括三大块:基础技能、专业基础技能、专业技能,以此为基础,从内容、要求、关键点、模块与项目、测评方式等五个方面拟定具体设计方案,以供其他高职院校同类专业参考借鉴。

  3. 76 FR 18166 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-04-01

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program Advisory Board, National Institute of Standards and Technology.... Cesaro's e-mail address is rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology...

  4. 75 FR 22553 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2010-04-29

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program Advisory Board, National Institute of Standards and Technology... Technology Innovation Program (TIP) Advisory Board is composed of ten members appointed by the Director...

  5. The Patent License Payoffs with Technology Standards in Communication Industry%通信产业技术标准中专利许可的收益研究

    Institute of Scientific and Technical Information of China (English)

    徐明

    2012-01-01

    通信产业技术标准中专利许可包含标准化组织、专利许可人、专利被许可人三个核心主体。短期中,在技术标准下进行专利许可总能够提高专利许可人的收益,而被许可人是否采用技术标准受到专利许可费的直接影响,但整个产业的总收益总是增加的。长期中,专利许可费递减能够降低各公司的成本,延长各公司收益的时间,提高技术标准的稳定性。因此,通信公司应当积极实施“专利标准化”战略,而标准化组织在制定技术标准时应当设定合理的专利许可费用。%There are three main parts in the topic, which are standard organization, patent licenser and patent li- censee. In short term, the patent licenser will always benefit from the patent license under technology standard. The patent licensee's payoff depends on the royalties. The payoff of the whole industry will always be increased. In long term, the decrease of royalties will lower the costs of every company, which will extend the period of benefit. Therefore, communication companies should participate in the technology standards with their patents. The standard organization should set reasonable royalties.

  6. Development and Application of Testing Technologies and Standards at Home and Abroad for Functional Home Textiles%国内外功能性家用纺织品测试技术及标准的发展与应用

    Institute of Scientific and Technical Information of China (English)

    党敏; 陆雅芳; 王建平

    2014-01-01

    近年来,随着人们消费水平的提高和消费需求的多样化,功能性家纺产品发展迅速。然而,从其功能评价的角度来看,相关的检测技术和标准化的发展相对滞后。本文从市场对家纺产品的主要功能性需求,如防螨、抗菌、防蚊虫、抗皱、防水、防油、易去污、抗紫外线、抗静电和远红外等方面,介绍了国内外功能性家纺产品的检测技术和标准的发展现状,并对相关的方法进行了比较,指出了在功能性家纺产品测试方法标准发展中的不足之处,并提出相关建议。%In recent years, with the raise of people’s consumption level and diversification of consumer demand, functional home textiles have got rapid development. However, from the view of evaluating their functions, developments of related testing technologies and standards are hysteretic relatively. This article introduced developing status of functional home textiles in testing technologies and standards at home and abroad based on market demand on main functions of home textiles, such as anti-mite, anti-bacteria, anti-mosquitoes, anti-crease, water repellency, oil repellency, soil release, resistance to ultraviolet, antistatic and far-infrared radiation properties. Shortages in developing testing method and standards of functional home textiles were pointed out by comparing related standards and some suggestions were threw out.

  7. DARPA Antibody Technology Program Standardized Test Bed for Antibody Characterization: Characterization of an MS2 sdAb Produced by U.S. Naval Research Laboratory

    Science.gov (United States)

    2016-10-01

    of each sample to prevent sample evaporation. The plate was then placed into a DynaPro temperature-controlled plate reader (Wyatt Technology). Each...Differential Scanning Calorimetry (DSC) DSC was used to obtain a quantitative melting temperature (Tm) for each of the NRL MS2 sdAb proteins. The...tubes. One aliquot was kept on ice for the duration of the experiment and was marked “time 0”. The remaining four aliquots were heated to 70 °C on a

  8. Intraoperative neuromonitoring of the external branch of the superior laryngeal nerve during thyroidectomy: the need for evidence-based data and perioperative technical/technological standardization.

    Science.gov (United States)

    Mangano, Alberto; Lianos, Georgios D; Boni, Luigi; Kim, Hoon Yub; Roukos, Dimitrios H; Dionigi, Gianlorenzo

    2014-01-01

    The external branch of the superior laryngeal nerve (EBSLN) is surgically relevant since its close anatomical proximity to the superior thyroid vessels. There is heterogeneity in the EBSLN anatomy and EBSLN damage produces changes in voice that are very heterogenous and difficult to diagnose. The reported prevalence of EBSLN injury widely ranges. EBSLN iatrogenic injury is considered the most commonly underestimated complication in endocrine surgery because vocal assessment underestimates such event and laryngoscopic postsurgical evaluation does not show standardized findings. In order to decrease the risk for EBSLN injury, multiple surgical approaches have been described so far. IONM provides multiple advantages in the EBSLN surgical approach. In this review, we discuss the current state of the art of the monitored approach to the EBSLN. In particular, we summarize, providing our additional remarks, the most relevant aspects of the standardized technique brilliantly described by the INMSG (International Neuromonitoring Study Group). In conclusion, in our opinion, there is currently the need for more prospective randomized trials investigating the electrophysiological and pathological aspects of the EBSLN for a better understanding of the role of IONM in the EBSLN surgery.

  9. Intraoperative Neuromonitoring of the External Branch of the Superior Laryngeal Nerve during Thyroidectomy: The Need for Evidence-Based Data and Perioperative Technical/Technological Standardization

    Directory of Open Access Journals (Sweden)

    Alberto Mangano

    2014-01-01

    Full Text Available The external branch of the superior laryngeal nerve (EBSLN is surgically relevant since its close anatomical proximity to the superior thyroid vessels. There is heterogeneity in the EBSLN anatomy and EBSLN damage produces changes in voice that are very heterogenous and difficult to diagnose. The reported prevalence of EBSLN injury widely ranges. EBSLN iatrogenic injury is considered the most commonly underestimated complication in endocrine surgery because vocal assessment underestimates such event and laryngoscopic postsurgical evaluation does not show standardized findings. In order to decrease the risk for EBSLN injury, multiple surgical approaches have been described so far. IONM provides multiple advantages in the EBSLN surgical approach. In this review, we discuss the current state of the art of the monitored approach to the EBSLN. In particular, we summarize, providing our additional remarks, the most relevant aspects of the standardized technique brilliantly described by the INMSG (International Neuromonitoring Study Group. In conclusion, in our opinion, there is currently the need for more prospective randomized trials investigating the electrophysiological and pathological aspects of the EBSLN for a better understanding of the role of IONM in the EBSLN surgery.

  10. Travel to France as Chief US Delegate at a meeting of International Standards Organization ISO/TC-85, ``Nuclear Technology``. Foreign trip report, March 17--March 26, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Westfall, R.M.

    1994-04-11

    As overall US Advisor for ISO/TC-85, SC-5, Dr. Westfall met with (1) Work Group 1, ``Measurement Techniques for the Chemical and Physical Characterization of UF{sub 6}, UO{sub 2}, and Mixed Oxide,`` on Monday, March 21, (2) Work Group 5, ``Standardization of Measurement Methods for the Characterization of Solid and Solidified Waste Forms, and for the Corrosion of their Primary Containers,`` on Tuesday, March 22; and (3) the full Subcommittee-5 on Wednesday, March 23. The status of work by all seven work groups in SC-5 was reported. Those having to do with nuclear fuel transportation (WG-4: UF, Containers, WG-9: Cask Trunnions, and WG-10: Cask Confinement) either have approved standards or drafts at an advanced stage of development. These work group convenors were asked to maintain their membership and establish new work areas in the field of nuclear fuel packaging. Definition of scope for new work is to be done in coordination with the interested staff members of the International Atomic Energy Agency, Vienna, Austria. On Thursday, March 24, the Cogema-Marcoule Plant staff hosted the SC-5 members to technical tours of their nuclear fuel reprocessing and waste vitrification and storage facilities.

  11. Waste incineration plant Brno. Engineering and reconstruction to a modern technology standard; Muellverbrennungsanlage Bruenn. Planung und Umbau auf einen modernen Anlagenstandard

    Energy Technology Data Exchange (ETDEWEB)

    Quicker, P.; Boerner, R.; Metschke, J.; Eggenstein, U.; Dolezal, V.; Faulstich, M. [ATZ Entwicklungszentrum, Sulzbach-Rosenberg (Germany)

    2008-11-15

    The waste incineration plant in Brno, Czech Republic will be reconstructed in main parts according to the reference documents of best available technology (BAT). The site has a tradition of more than one hundred years in the field of thermal waste treatment. But the status of the incineration plant does not comply with current requirements. Therefore, it is planned to re-install two complete boiler lines (each with a nominal waste capacity of 14 t/h), including peripheral devices for pre-treatment and waste feed, flue gas cleaning and energy utilization. The challenge lies in the terms of the project. Existing buildings and installations will be in use during the project and continuous operation of the plant is required as far as possible. The ATZ Entwicklungszentrum has been involved in developing the call for tenders, the negotiation process with tenderers and the selection of tenders. Technical focus of the support laid on furnace and boiler with special emphasis in corrosion protection as well as on flue gas cleaning. ATZ has developed the following proposals for the technological design and configuration of these process components in accordance with the BAT document on waste incineration: For optimized corrosion protection in the boiler and combustion chamber, the side walls of the combustion chamber and the ignition ceiling should be lined with back-casting SiC-panels. In the burnout-zone, an Al{sub 2}O{sub 3} ramming material must be applied. Above the combustion chamber, in the temperature zone up to approximately 850 C, air ventilated SiC-panels are the best solution. The rest of the first draught, the boiler ceiling and the first half of the second draught should be weld-cladded with Inconel 625. Same treatment should be applied to membrane walls and those pipes of the first superheater bundle, which are particularly exposed to flue gas. A technological and economical comparison of different options for flue gas treatment showed that dry and semi

  12. A Standard of Support.

    Science.gov (United States)

    Wheat, Dave; Cramer, James E.; Cramer, Mary Kay

    2000-01-01

    Principals can support teachers' pursuit of National Board of Professional Teaching Standards certification by learning about the NBPTS's certification process, putting candidates in contact with NBPTS support programs, facilitating access to technology, providing building access on weekends, volunteering to photocopy or obtain needed materials,…

  13. 智能加载激光洛氏硬度标准装置%A Standard Rockwell Hardness Device with Intelligent Force-loading and Laser Measuring Technology

    Institute of Scientific and Technical Information of China (English)

    石伟; 陶继增; 王丽; 李金颖; 徐明

    2015-01-01

    介绍了一种新型的智能加载激光洛氏硬度标准装置,装置采用电动结合砝码的加载方式,实现了力值加载的智能化过程控制;采用外差激光干涉测量技术,实现了压痕深度的无接触、高精度测量。试验表明:该装置稳定、可靠、准确度高,技术指标达到了国际洛氏硬度新定义的要求,具有很高的实用价值。%A new standard Rockwell Hardness device with intelligent force-loading and laser measuring technology was presented in this pa-per. It adopted servo-motor and dead weights to carry out intelligent force loading, and used the technology of laser heterodyne interferometer to realize no-contact and high-precision measurement of indentation depth. The test results prove that this standard device is stable and reliable. The technical specifications meet the requirements of the new definition of the international Rockwell Hardness draft criterion. It has high practical val-ue.

  14. A communication standard between Dimensional Measurement Equipments and its implementation technology%尺寸检测设备的通讯标准DMIS及其实现技术

    Institute of Scientific and Technical Information of China (English)

    崔长彩; 车仁生; 罗小川; 王东; 李兵

    2001-01-01

    讨论了机械工业自动化测试与控制领域的一个重要问题:尺寸检测设备的通讯标准及其实现技术。介绍了尺寸测量接口标准(DMIS)的产生背景、用途、语法结构及其功能的扩展完善。文章最后简要介绍了最近几年出现的DMIS对象技术(DOT)和虚拟DMIS(Virtual-DMIS)。这对我国未来尺寸测试设备的发展和系统集成具有重要意义。%This paper proposes an important problem about automated measurement and control in the field of industry metrology: the communication standard between automated dimensional measurement equipment and its implementation technology, introduces the background, purpose, grammar structure and its expanded functionality of the Dimensional Measurement Interface Standard(DMIS), and then presents the latest DMIS Object Technology(DOT) and Virtual-DMIS. It is quite significant for developing dimensional measurement equipment and integrating automated systems in the future.

  15. Radiation safety assessment and development of environmental radiation monitoring technology; standardization of input parameters for the calculation of annual dose from routine releases from commercial reactor effluents

    Energy Technology Data Exchange (ETDEWEB)

    Rhee, I. H.; Cho, D.; Youn, S. H.; Kim, H. S.; Lee, S. J.; Ahn, H. K. [Soonchunhyang University, Ahsan (Korea)

    2002-04-01

    This research is to develop a standard methodology for determining the input parameters that impose a substantial impact on radiation doses of residential individuals in the vicinity of four nuclear power plants in Korea. We have selected critical nuclei, pathways and organs related to the human exposure via simulated estimation with K-DOSE 60 based on the updated ICRP-60 and sensitivity analyses. From the results, we found that 1) the critical nuclides were found to be {sup 3}H, {sup 133}Xe, {sup 60}Co for Kori plants and {sup 14}C, {sup 41}Ar for Wolsong plants. The most critical pathway was 'vegetable intake' for adults and 'milk intake' for infants. However, there was no preference in the effective organs, and 2) sensitivity analyses showed that the chemical composition in a nuclide much more influenced upon the radiation dose than any other input parameters such as food intake, radiation discharge, and transfer/concentration coefficients by more than 102 factor. The effect of transfer/concentration coefficients on the radiation dose was negligible. All input parameters showed highly estimated correlation with the radiation dose, approximated to 1.0, except for food intake in Wolsong power plant (partial correlation coefficient (PCC)=0.877). Consequently, we suggest that a prediction model or scenarios for food intake reflecting the current living trend and a formal publications including details of chemical components in the critical nuclei from each plant are needed. Also, standardized domestic values of the parameters used in the calculation must replace the values of the existed or default-set imported factors via properly designed experiments and/or modelling such as transport of liquid discharge in waters nearby the plants, exposure tests on corps and plants so on. 4 figs., 576 tabs. (Author)

  16. Fiscal 1997 survey report. Subtask 2 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study for the promotion of international cooperation; survey/study on the standardization for hydrogen energy technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 2 kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In relation to the basic study of the standardization for hydrogen energy technology and ISO/TC197, the results of the fiscal 1997 survey were summarized. From fiscal 1994 through 1996, in the wide-range field related to hydrogen energy technology, the survey of the present situation of the related standards/laws was made and the needs/subjects of standardization to be studied in the future were extracted. At the present stage, however, it is still early to enter into the stage of discussing the standardization. Therefore, in this fiscal year, only in the field of the storage/transportation/handling of liquid hydrogen, standards/laws abroad and in Japan were comparatively investigated for the basic study toward the standardization. Further, concerning ISO/TC197, studies were proceeded with of the liquid hydrogen land vehicle fueling system interface/fuel tanks/transportation containers/hydrogen fuel product specifications/airport hydrogen fueling facilities. Some are at the stage of drafting the international standard. Three drafts for the new standard were added such as gaseous hydrogen/hydrogen blend vehicular fuel systems, gaseous hydrogen fuel tanks, and basic requirements for safety of hydrogen systems. The standardization is indispensable to introducing the developed technology to the commercialization. 9 refs., 5 figs., 13 tabs.

  17. Communications standards

    CERN Document Server

    Stokes, A V

    1986-01-01

    Communications Standards deals with the standardization of computer communication networks. This book examines the types of local area networks (LANs) that have been developed and looks at some of the relevant protocols in more detail. The work of Project 802 is briefly discussed, along with a protocol which has developed from one of the LAN standards and is now a de facto standard in one particular area, namely the Manufacturing Automation Protocol (MAP). Factors that affect the usage of networks, such as network management and security, are also considered. This book is divided into three se

  18. Application of Siemens NX Template File Technology in National Standard Drawing Templates%Siemens NX模板文件技术在国标制图模板中的应用

    Institute of Scientific and Technical Information of China (English)

    陈祥

    2014-01-01

    Siemens NX applications in computer-aided design has a very wide, modeling specification and modeling standards have become the key to implementation of three-dimensional CAD software. By Siemens NX template file technology, designing drawing template files which comply with national standards will help solve the issues of normalization and standardization when the software encounteres in three dimensional model to two-dimensional engineering drawings. It has a strong value in practical application.%在计算机辅助设计中Siemens NX的应用已十分广泛,建模规范及建模标准已成为企业实施三维CAD软件的关键。通过Siemens NX模板文件技术,设计符合国标的制图模板文件将有利于解决该软件在三维模型转换为二维工程图时遇到的规范化与标准化问题,具有较高的应用价值。

  19. Achieving Standardization

    DEFF Research Database (Denmark)

    Henningsson, Stefan

    2014-01-01

    competitive, national customs and regional economic organizations are seeking to establish a standardized solution for digital reporting of customs data. However, standardization has proven hard to achieve in the socio-technical e-Customs solution. In this chapter, the authors identify and describe what has...

  20. Achieving Standardization

    DEFF Research Database (Denmark)

    Henningsson, Stefan

    2016-01-01

    competitive, national customs and regional economic organizations are seeking to establish a standardized solution for digital reporting of customs data. However, standardization has proven hard to achieve in the socio-technical e-Customs solution. In this chapter, the authors identify and describe what has...

  1. Mobile intelligent terminal security technology requirements standard interpretation%移动智能终端安全能力技术要求标准解读

    Institute of Scientific and Technical Information of China (English)

    谢利涛

    2013-01-01

    主要介绍了YD/T2407-2013《移动智能终端安全能力技术要求》标准的范围、安全能力框架及目标、主要技术要求、功能限制要求、安全能力分级和贯彻实施的相关建议。重点针对硬件安全能力、操作系统安全能力、外围接口安全能力、应用层安全要求和用户数据保护安全能力等方面进行了说明。%Mainly introduces YD/T2407-2013“intelligent mobile terminal security technical requirements”standard range,security framework and target,main technical requirements,functional limitations,safety re-quirements Ability Classification and implementation suggestions.Focusing on ability,hardware security op-erating system security capacity,peripheral interface security ability,application layer security require-ments and user data safety protection ability and other aspects are described.

  2. An Empirical Study on the Formation Mechanism of Technology Standards%技术标准形成机理实证研究

    Institute of Scientific and Technical Information of China (English)

    高俊光; 单伟

    2011-01-01

    Through qualitative research to explore innovative private capital participation in the incubator industry issues, we should face private capital into innovation incubators of social discrimination, respect the law of private capital allocation of resources develop and optimize bussiness model of operation. The article analyzes the drawbacks of the traditional model of innovation incubator's barriers to entry of private capital, sum based on private capital into the barriers, proposes private capital to participate in innovation incubator of real options-based, service unit type, embedded type and stage of the overall business model embedded in, gives its dimensions and to consider the law of evolution. Research through appropriate design of business model innovation incubator, seeks to achieve regional economic growth, technological progress, benefiting private capital, innovation and enterprise development, win-win situation.%技术标准的作用已远远超越技术问题本身,已经成为决定竞争规则的关键性因素.针对技术标准的形成机理展开研究,旨在为提高我国的技术标准整体水平,进而为提升我国的自主创新能力提供理论参考和借鉴.技术标准的形成以技术为基础,以经济为动力,同时受到规制主体的影响,技术标准正是在这三方面因素的综合作用下建立、发展和替代的.在此基础上,以TD-SCDMA标准的形成为例,实证研究了技术—经济—规制路径对该标准建立的影响.

  3. Carrots and Sticks: A Comprehensive Business Model for the Successful Achievement of Energy Efficiency Resource Standards Environmental Energy Technologies DivisionMarch 2011

    Energy Technology Data Exchange (ETDEWEB)

    Satchwell, Andrew; Cappers, Peter; Goldman, Charles

    2011-03-22

    Energy efficiency resource standards (EERS) are a prominent strategy to potentially achieve rapid and aggressive energy savings goals in the U.S. As of December 2010, twenty-six U.S. states had some form of an EERS with savings goals applicable to energy efficiency (EE) programs paid for by utility customers. The European Union has initiated a similar type of savings goal, the Energy End-use Efficiency and Energy Services Directive, where it is being implemented in some countries through direct partnership with regulated electric utilities. U.S. utilities face significant financial disincentives under traditional regulation which affects the interest of shareholders and managers in aggressively pursuing cost-effective energy efficiency. Regulators are considering some combination of mandated goals ('sticks') and alternative utility business model components ('carrots' such as performance incentives) to align the utility's business and financial interests with state and federal energy efficiency public policy goals. European countries that have directed their utilities to administer EE programs have generally relied on non-binding mandates and targets; in the U.S., most state regulators have increasingly viewed 'carrots' as a necessary condition for successful achievement of energy efficiency goals and targets. In this paper, we analyze the financial impacts of an EERS on a large electric utility in the State of Arizona using a pro-forma utility financial model, including impacts on utility earnings, customer bills and rates. We demonstrate how a viable business model can be designed to improve the business case while retaining sizable ratepayer benefits. Quantifying these concerns and identifying ways they can be addressed are crucial steps in gaining the support of major stakeholder groups - lessons that can apply to other countries looking to significantly increase savings targets that can be achieved from their own utility

  4. On Internationalization of Accounting Standards

    Institute of Scientific and Technical Information of China (English)

    Liu Shuyun; Yuncheng

    2007-01-01

    @@ World economy globalization highlighted with deregulation of trade, capital movement and financing has been the dominant trend under the push of rapid growing of modern information technology,creating a urgent demand for internationalized accounting standards.

  5. Evaluation Method and Standard Exploration for Gas Field Sand Control Technology%气田防砂效果评价方法与标准探索

    Institute of Scientific and Technical Information of China (English)

    熊友明; 徐家年; 冯胜利; 张启汉; 刘理明

    2011-01-01

    There is no uniform standard about gas sand control evaluation. According to the actual situation of the production of Sebei gas field,combined with the characteristics of gas production and sand control,sand control evaluation method was proposed in this paper. This evaluation method took into account the aspects of gas well production, sand retention effect, sand control efficient and sand control validity. The effects of three main sand control techniques in Sebei gas field were systematically evaluated with the application of gas sand control evaluation method. Evaluation results showed that the three main sand control techniques had good effects. Among the three sand control techniques, fiber-complex sand control technique was tested to be the best. The results of sand control evaluation were matched with field production understanding,which further suggested that the sand evaluation method can be applied to Sebei gas field.%当前,国内针对气井防砂效果的评价尚无统一标准.根据涩北气田生产实际情况,结合气井生产、防砂特点,提出了气井防砂效果评价方法.该方法综合考虑了气井防砂前后生产情况、防砂工艺挡砂效果、防砂工艺有效率及防砂工艺有效期.应用气井防砂效果评价方法,对涩北气田3种主导防砂工艺的防砂效果进行了系统评价.评价结果表明,涩北气田主导防砂工艺防砂效果较好,3种主导防砂工艺中,纤维复合防砂工艺效果最好,其次为高压一次充填防砂工艺和端部脱砂压裂防砂工艺.防砂效果评价结果与气田生产实际认识符合,进一步说明了该气井防砂效果评价方法适用于涩北气田.

  6. (Terminology standardization)

    Energy Technology Data Exchange (ETDEWEB)

    Strehlow, R.A.

    1990-10-19

    Terminological requirements in information management was but one of the principal themes of the 2nd Congress on Terminology and Knowledge Engineering. The traveler represented the American Society for Testing and Materials' Committee on Terminology, of which he is the Chair. The traveler's invited workshop emphasized terminology standardization requirements in databases of material properties as well as practical terminology standardizing methods. The congress included six workshops in addition to approximately 82 lectures and papers from terminologists, artificial intelligence practitioners, and subject specialists from 18 countries. There were approximately 292 registrants from 33 countries who participated in the congress. The congress topics were broad. Examples were the increasing use of International Standards Organization (ISO) Standards in legislated systems such as the USSR Automated Data Bank of Standardized Terminology, the enhanced Physics Training Program based on terminology standardization in Physics in the Chinese province of Inner Mongolia, and the technical concept dictionary being developed at the Japan Electronic Dictionary Research Institute, which is considered to be the key to advanced artificial intelligence applications. The more usual roles of terminology work in the areas of machine translation. indexing protocols, knowledge theory, and data transfer in several subject specialties were also addressed, along with numerous special language terminology areas.

  7. Study on Preparation Technology and Quality Standard of Xuanshen Dropping Pills%玄参滴丸制备工艺及质量标准研究

    Institute of Scientific and Technical Information of China (English)

    黄真; 李兆翌; 钟晓明; 盛振华

    2011-01-01

    OBJECTIVE To establish an optimum preparation technology and the method for quality control of Xuanshen dripping pills. METHODS Orthogonal test was applied to optimize the preparation with the choice of substrate, its proportion of substrate to drug, the drug and refrigerant temperature, dropping speed and distance to make dissolution time, appearance and weight variation up to grade. Using TLC to identify the dripping pills, harpagoside in dripping pills was determined by UPLC. Using ACQUITY UPLC BEH C18 column (2.1 mm× 100 mm, 5 urn), the mobile phase was acetonitrile-1% ethylic acid (31 : 69), the column temperature was 35 ℃, the flow rate was 0.2 mL·min-1 and the detection wavelength was 278 nm. RESULTS The optimum pills preparation was the ratio of PEG4000 to PEG6000 (4 : 1) and drug to substrate (1 : 3). Drug temperature was 90 ℃. The mixed liquid of dimethicone and liquid paraffin was refrigerant. Drug was dropped into the refrigerant of 0 °C by (20+2) dropping per minute (freeze-pillar height 3 cm). The herbs could be identified by TLC. For harpagoside, the linear range was 0.010-0.040 μg(r=0.999 9), and the average recovery was 99.2%, RSD was 0.87%. CONCLUSION The good quality pills can be produced through this process with the simple and reliable method. The determination method is simple, specific,reproducible and accurate, and can be applied to the quality control for the Xuanshen dripping pills.%目的 确定玄参滴丸最佳制备工艺并制定其质量标准.方法 以滴丸的溶散时限、外观及丸重变异系数作为综合评定指标,对玄参提取物与基质的比例、基质配比(PEG4000∶PEG6000)、药液温度及滴制过程中滴速、滴距、冷凝液温度进行正交试验设计,优选出滴丸最佳成型工艺及滴制工艺.采用TLC对玄参滴丸进行定性鉴别,超高效液相色谱法(UPLC)测定玄参滴丸中哈巴俄苷的含量.色谱柱:ACQUITY UPLC BEH C18柱(2.1 mm× 100 mm,5μm);流动相:乙腈-1

  8. Standardization Historical Overview

    Institute of Scientific and Technical Information of China (English)

    Wang Ping

    2008-01-01

    @@ 1. Indroduction Standardization germinated in ancient times, and began to develop from the beginning of the in-dustrial revolution, and took off in the later years of the 19th Century. It has been closely connected with the development of science and technology, as well as industry and trade throughout human histo-ry. Standardization now plays an important role in nearly every aspect of human life, in different sec-tors of industry and society. It has had a great im-pact on our lives.

  9. The IFC standard - a review of history, development, and standardization

    OpenAIRE

    Laakso, Mikael; Kiviniemi, Arto

    2012-01-01

    IFC (Industry Foundation Classes) is an open and standardized data model intended to enable interoperability between building information modeling software applications in the AEC/FM industry. IFC has been in development by an industry consortium since 1994, and since the start of the effort, the evolving industry context, standardization organization, resource availability, and technology development have exposed the standardization process to a dynamic environment. While the overarching mis...

  10. Impact of equine assisted reproductive technologies (standard embryo transfer or intracytoplasmic sperm injection (ICSI) with in vitro culture and embryo transfer) on placenta and foal morphometry and placental gene expression.

    Science.gov (United States)

    Valenzuela, Orlando A; Couturier-Tarrade, Anne; Choi, Young-Ho; Aubrière, Marie-Christine; Ritthaler, Justin; Chavatte-Palmer, Pascale; Hinrichs, Katrin

    2017-07-24

    Assisted reproductive technologies (ARTs) such as intracytoplasmic sperm injection (ICSI), in vitro embryo culture and embryo transfer (ET) may be associated with alterations in fetal and placental development. In horses, ET has been used for decades. More recently, in vitro embryo production by ICSI and in vitro culture, followed by embryo transfer (ICSI-C) has become an accepted method for clinical foal production. However, no information is available on the effects of ICSI-C or even of standard ET itself on placental and neonatal parameters in horses. We therefore evaluated placental and neonatal morphology and placental gene expression in reining- and cutting-type American Quarter Horse foals produced using different technologies. Thirty foals and placentas (naturally conceived (NC), ET and ICSI-C; 10 in each group) were examined morphometrically. The only parameter that differed significantly between groups was the length of the foal upper hindlimb, which was longer in ET and ICSI-C than in NC foals. Evaluation of placental mRNA expression for 17 genes related to growth and vascularisation showed no difference in gene expression between groups. These data indicate that within this population, use of ARTs was not associated with meaningful changes in foal or placental morphometry or in expression of the placental genes evaluated.

  11. 依据标准探讨机床电气回路保护技术及其运用%Protection Technology of Machine Electrical Circuit and Its Practical Applications Based on the Relevant In-dustry Standards

    Institute of Scientific and Technical Information of China (English)

    孙伟; 马永青

    2015-01-01

    Machine tools' electrical design , installation and usage are related to the electrical circuit choosing , the specifications specify-ing of cables and circuit breaker and the technical conditions of electri-cal components etc . When the machine appears electrically abnormal or operating failure , the main work is speculating the failure through ana-lyzing the protection technology of electrical circuit . This paper is to explore the protection technology of machine tools' electrical circuit and its practical applications based on the relevant national and corporate industry standards .%机床的电气设计、安装与使用一定会涉及到电气回路的选择、电缆及断路器的规格指定、电气元器件的技术条件等等.而当机床出现电气装置异常或运转失效时,也会以分析电气回路的保护技术为主来推测故障.本文依据相关的国家及企业行业标准来探讨机床电气回路的保护技术和应用.

  12. Standardization of Mobile Satellite Service Technology in ITU-R:Driving Force of Integrated Mobile Services%ITU-R卫星移动通信标准--整合移动业务的动力

    Institute of Scientific and Technical Information of China (English)

    金秀英

    2015-01-01

    认为国际电信联盟无线电通信部门(ITU-R)关于卫星移动通信的标准化新进展将在全球移动通信设备和系统无缝连接的实现过程中起到重要作用,卫星和地面的集成/混合的天地一体化系统将充分发挥原系统各自的优势,未来多数的卫星移动业务(MSS)都将基于这种天地一体化系统。指出IMT-Advanced系统的卫星部分和ITU-R标准化无线接口是集成MSS系统的关键技术,将成为激活MSS产业的新的驱动力。%Wel-developed standards wil play an important role in facilitating seamless interworking of equipment and systems global y. Most future MSS services wil use integrated and/or hybrid satel ite-terrestrial networks that leverage both satel ite and terrestrial networks. Satel ite components of IMT-Advanced systems and ITU-R standardized radio interfaces provide key technology in integrated satel ite and terrestrial networks, and this wil be a new driving force behind MSS industries.

  13. 第四十六讲工业物联网技术及标准体系%Chapter 46:The Technology and Standard System of Industrial IoT

    Institute of Scientific and Technical Information of China (English)

    刘阳; 张天石; 佟星; 曾鹏

    2014-01-01

    针对当前工业物联网系统中存在的异构性和互操作性问题,本文介绍了一种工业物联网技术及标准体系,该标准体系中包括了工业物联网身份标识、工业物联网应用属性协议、工业物联网服务协议以及工业物联网互操作协议四项标准。该系列标准的制定将有利于提高工业物联网的运行效率和互操作性,为工业物联网发展提供支持。%The industrial Internet of Things (IoT) systems exist more heterogeneity and interoperability issues. For these reasons, a series of technologis and standards for the industry are proposed in this paper, which include the identiifer for industrial IoT , the application attribute protocol for industrial IoT, the service protocol for industrial IoT and the interoperability for industrial IoT. The development of industrial IoT standards will not only improve the efifciency of industrial IoT and the capability of interoperability, but also support for the development of industrial IoT.

  14. Evolution of Standard and Key Technologies of Commercial Vehicle Electronic Stability Control System%商用车电子稳定性控制系统的标准发展及关键技术

    Institute of Scientific and Technical Information of China (English)

    罗文发; 吴光强; 郑松林

    2012-01-01

    介绍了商用车电子稳定性控制系统(ESC)的基本原理及其技术背景,阐述了系统标准的发展现状,并从系统功能定义、系统评价、系统的试验方法及仿真方法等方面,分析了标准的核心内容.简述了系统控制策略、车辆状态估计、执行器设计开发、系统评价体系、底盘综合控制等关键技术.%This article describes the commercial vehicle electronic stability control (ESC) system principles, technical background and development status of system standard, analyzes the core content of the standards in system function definition, system evaluation, system test method and simulation method. And system control strategy, vehicle status estimate, design and development of actuator, system appraisal system, key technologies, i.e. chassis control, are briefly introduced in the paper.

  15. 77 FR 25143 - Announcement of Meeting on “Developing Standard Requirements for Fatigue Performance of...

    Science.gov (United States)

    2012-04-27

    ... used in industry and developing standard requirements. Consortium planning and standard development... Institute of Standards and Technology (NIST) invites interested parties to attend a pre-consortium meeting... National Institute of Standards and Technology Announcement of Meeting on ``Developing...

  16. Treatment Technology Research of Outside Discharge on Compliance Standard of Dense Oil and Extra-dense Oil Sewage%稠油及超稠油污水达标外排处理工艺研究

    Institute of Scientific and Technical Information of China (English)

    乔明

    2014-01-01

    稠油及超稠油污水具有黏度大、油水密度差小、乳化严重、水温高、水质水量变化大、成分复杂等特点,该废水的B/C小于0.3,属于难生物降解污水。通过试验表明,采用预处理工艺先除油、除悬浮物,再进行生物处理工艺去除可生化降解COD,最后经过深度处理工艺去除残余的难生化降解COD,可保证处理后水质全面达标。%Dense oil and extra-dense oil sewage bear a lot of characteristics such as high paste, little grease density, heavy emulsiifcation, high water temperature, great change of water quality and water quantity, component complexity etc. The B/C of wastewater is less than 0.3, belonging to hard bio-degradation sewage. The test shows that by adopting the pre-treatment technology and removing oil and suspended matters, and then conducting bio-treatment technology, the biological and chemi-cal degradation of COD can be removed. Final y, the remnants of the hard biological and chemical degradation of COD can be removed through the depth treatment technology, so as to meet the compliance standard of water quality after treatment.

  17. Research on the Relationship between Technology Innovation,Technology Standardization and Creative Economic Growth of China%科技创新、人力资本对创意经济的影响研究

    Institute of Scientific and Technical Information of China (English)

    田超杰

    2013-01-01

    Creative industry is considered to be one of the future leading industry and will play an important role in the process of improving industry structure. In this paper, we use the Stochastic Frontier Production Function( SFA) index method to research TFP of our country creative economy, and then compare the contribution of factors inputs of human capital and technology innova-tion to creative economy growth by econometric model. The analysis shows that human capital is the key power to promote creative economic growth in our country, and the contribution of utility model patents to creative economic growth is lower, design patent has a positive strong effect to creative economic growth, invention patent to creative economic growth have the opposite effect. To make our country creative sustained economic growth, the government need relevant policy support and promote.%  创意经济被认为是未来经济发展的主要形式,对结束我国依靠投资和外贸驱动的粗放式经济增长具有重要意义。运用随机前沿函数SFA方法,对我国创意经济全要素生产率的增长和变动状况进行分析,并运用相关计量经济学模型比较分析人力资本、技术进步对创意经济增长和发展的贡献。通过分析发现,人力资本是推动创意经济增长的主要动力。实用型创新对创意经济具有正向影响作用,但水平较低。外观创新对创意经济增长具有较强的拉动作用。发明创新对创意经济增长有一定的反向作用。要使我国创意经济持续增长,还需相关政策支持和推动。

  18. Information Technology Initiative (Videorecording),

    Science.gov (United States)

    Physical description: 1 VHS video; col.; sd.; mono.; standard playback sp.; 35:40 mins.; 1/2 in. In this video, Dr. Kurt Fisher, Deputy Director for Information Technology , introduces the Corporate Information Management (CIM) program and explains the following major technical initiatives: reuse/repositories; I-case; data administration; information technology architecture; software process improvement; standards.

  19. On the Nature of Standards and Patents

    Institute of Scientific and Technical Information of China (English)

    Bing WANG; Xu LI; Lanxi XIONG

    2008-01-01

    @@ Introduction 'Standard' and 'patent' are the buzz words in China's information and communication technology (ICT) industry. While the government has expressed its intention to promote standardization and patent protec-tion, what direction should enterprises especially domestic ICT companies take?

  20. 76 FR 70970 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-11-16

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program (TIP) Advisory Board will hold a meeting via teleconference on... Innovation Program Acting Deputy Director, National Institute of Standards and Technology, 100 Bureau...

  1. 基于H.264的E1标准下的视频传输技术改进研究%Improvement Research of Video Transmission Technology Based on H.264 under E1 Standard

    Institute of Scientific and Technical Information of China (English)

    徐宁; 孟凡荣; 孙洋

    2012-01-01

    目前,无线视频传输大多在E1标准下进行,但由于采用了较早的H.261编解码标准,一直存在误码率较高,图像较模糊等问题,影响了指挥机关对现场态势的判断。文章基于先进的H.264编解码标准,采用以TMS320DM6467T高清视频双核媒体处理器作为CPU的SEED-VPM6467独立开发平台,在卫星通信系统中,对无线视频传输技术进行了改进性研究,由过去的CIF(352×288)格式,提升到D1(4CIF)视频格式的传输,对无线视频传输系统,提供了技术依据。%By now,wireless video transmission carried out under E1 standard,but because of the earlier H.263 code and encode standard,there has always been some problems,such as high bit-error rates,pattern blurring,which have affeced the judgement by the military commands according to the situation.This paper puts forward an improvement research of video transmission technology based on advanced H.264 standard,using SEED-VPM6467 as platform,under satelite communications,which could increase the video format from CIF to D1(4CIF).This research provides technical support for wireless video transmission systerm.

  2. 78 FR 43145 - Announcing Approval of Federal Information Processing Standard 186-4, Digital Signature Standard

    Science.gov (United States)

    2013-07-19

    ... Standard 186-4, Digital Signature Standard AGENCY: National Institute of Standards and Technology (NIST... of Federal Information Processing Standard (FIPS) 186-4, Digital Signature Standard (DSS). FIPS 186-4 specifies three techniques for the generation and verification of digital signatures that can be used for...

  3. Experimental Standards in Sustainability Transitions

    DEFF Research Database (Denmark)

    Hale, Lara Anne

    of technological standards for sustainable building. Launching from a critical realist social ontology, I collected ethnographic data on the Active House Alliance, its cofounder VELUX, and three of their demonstration building projects in Austria, Germany, and Belgium over the course of three years from 2013...... to 2016. In light of the literature on standards and global experimental governance (GXG), I explicate how experiments unfold processually and how standards makers adjust the standard’s development to learnings and social insights from these experiments....

  4. Frequency standards

    CERN Document Server

    Riehle, Fritz

    2006-01-01

    Of all measurement units, frequency is the one that may be determined with the highest degree of accuracy. It equally allows precise measurements of other physical and technical quantities, whenever they can be measured in terms of frequency.This volume covers the central methods and techniques relevant for frequency standards developed in physics, electronics, quantum electronics, and statistics. After a review of the basic principles, the book looks at the realisation of commonly used components. It then continues with the description and characterisation of important frequency standards

  5. Integrated Standardization and Systems Engineering Management

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Integrated standardization is one of the fundamenta l forms of modern standardization. It is the combination of system science and the content of standardization. The development of system science has provided theo retic foundation and precondition for integrated standardization. The relevant r esearch on integrated standardization and system engineering illustrate that int egrated standardization is a advanced method which presented with the developmen t of modern science and technology . Integrated st...

  6. Forestry Standardization & Forestry Insurance

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Forestry insurance of our country has developed slowly,of which the main difficulty lies in predicting and determining forestry risk,confirming the sum insured,raising the premiums, indemnity for property loss,coordinating forestry insurance and forestry protection,and lack of insurance legal system etc.With the implementation of forestry's standardized project,and overcoming effectively the technological obstacle existing in forestry's insurance,the development speed of forestry's insurance will be accelerated too.

  7. Standard Power

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    The call for China to push forward its own standardsto facilitate the development of core technologies hasnever been stronger. This month, CIB takes a look atfour of China's more high-profile domestic ITstandards: WLAN, EVD, IPv6 and TD-SCDMA

  8. Innovation and de facto standardization

    DEFF Research Database (Denmark)

    Brem, Alexander; Nylund, Petra; Schuster, Gerd

    2016-01-01

    Setting technology standards is the route to market growth and to potentially influencing the performance of a whole industry. When a market accepts a particular technology as one that defines the specifications for products in the entire industry, a dominant design is set. In this article, we...... of the increasing speed of technological development and standardization. Additionally, results from a sensitivity analysis for different threshold values of dominant design call for adjusting a binary definition of dominant design with different threshold values depending on the effects under study....

  9. Science education standards

    Energy Technology Data Exchange (ETDEWEB)

    Alberts, B.

    1994-12-31

    This paper describes the National Science Education Standards that are being developed at the National Research Council. The Standards are being developed for the following areas: content, teaching, assessment, program, and system. The national science standards will call for the kind of science that provides both an understanding of the basic concepts needed for success in our high technology society, and the acquisition of process skills, or the ability to proceed step by step to solve a practical problem. Science should become a core subject like reading, writing and math in grades K-12. At all levels, the material taught should be interesting, both to students and to teachers. The profession of science teaching must become an attractive one, which is possible to do well without superhuman effort. The scientific community must accept responsibility for achieving these goals.

  10. Islam, Standards, and Technoscience

    DEFF Research Database (Denmark)

    Fischer, Johan

    Halal (literally, "permissible" or "lawful") production, trade, and standards have become essential to state-regulated Islam and to companies in contemporary Malaysia and Singapore, giving these two countries a special position in the rapidly expanding global market for halal products......, this book provides an exploration of the role of halal production, trade, and standards. Fischer explains how the global markets for halal comprise divergent zones in which Islam, markets, regulatory institutions, and technoscience interact and diverge. Focusing on the "bigger institutional picture......" that frames everyday halal consumption, Fischer provides a multisited ethnography of the overlapping technologies and techniques of production, trade, and standards that together warrant a product as "halal," and thereby help to format the market. Exploring global halal in networks, training, laboratories...

  11. Sharing Science and Technology.

    Science.gov (United States)

    Morgan, Robert P.

    1983-01-01

    Defining development as some combination of improving the standard of living and quality of life, meeting basic needs, and increasing per capita gross national product, this article discusses the role science and technology can play in developing countries. Considers technology transfer, appropriate technology, and other issues. (JN)

  12. Trade Spat on Technology Standards Heating up

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In the past few months technical barriers,often called non-tariff or hidden barriers,have increased sharply,even more than traditional instruments of protectionsim such as anti-dumping investigations and border tariffs.

  13. Software asset management and its implementation based on Chinese information technology services standard%软件资产管理及其基于ITSS原理的实施

    Institute of Scientific and Technical Information of China (English)

    杜兴盛

    2013-01-01

    This paper aimed to improve the percentage of organizational software's legalization,to enhance compliance of organizational software,reduce legal risks,and solve the problem relating to the rationalization of software investment.This research aimed at scientific methods to improve lifecycle management capabilities of organizational software,and was based on domestic practice of Software Asset Management (SAM) and International Organization for Standardization/International Electrotechnical Commission 19770 (ISO /IEC 19770),combined relevant research of Chinese Information Technology Services Standard (ITSS) aiming at Chinese Information Technology (IT) industry to analyze ITSS core principles,the contents SAM stakeholders concerning about,and to clarify SAM's concept,purpose and characteristics.This paper gave the main method of SAM implementation and the maturity model of evaluation,which not only meet the consistency of organization's asset management,but also meet the unique nature of the financial management,material management and available state management.The organization was promoted through SAM,and the organizational compliance was improved and legal risks and costs were reduced.%针对如何提高组织软件正版化率、提升组织的软件合规、降低法律风险、合理化的软件投入的问题,研究旨在提高组织软件全生命周期管理能力的科学方法,基于软件资产管理(SAM)国内实践以及ISO/IEC 19770的相关标准,结合中国信息技术服务标准体系(ITSS)对中国信息技术产业现状进行的相关研究,分析ITSS核心原理、SAM相关方关注内容,明确SAM的概念、目的以及特点,给出了实施SAM的主要方法以及评价的成熟度模型,实现SAM既要满足组织资产管理的一致性,又有贯穿财务管理、实物管理及对其可用状态的管理的独特性,并能够真正让组织从中获得提升,解决提高组织合规、降低法律风险和费用的问题.

  14. Standard deviations

    CERN Document Server

    Smith, Gary

    2015-01-01

    Did you know that having a messy room will make you racist? Or that human beings possess the ability to postpone death until after important ceremonial occasions? Or that people live three to five years longer if they have positive initials, like ACE? All of these ‘facts' have been argued with a straight face by researchers and backed up with reams of data and convincing statistics.As Nobel Prize-winning economist Ronald Coase once cynically observed, ‘If you torture data long enough, it will confess.' Lying with statistics is a time-honoured con. In Standard Deviations, ec

  15. Recommendations for the standardization and interpretation of the electrocardiogram: part I: the electrocardiogram and its technology a scientific statement from the American Heart Association Electrocardiography and Arrhythmias Committee, Council on Clinical Cardiology; the American College of Cardiology Foundation; and the Heart Rhythm Society endorsed by the International Society for Computerized Electrocardiology.

    Science.gov (United States)

    Kligfield, Paul; Gettes, Leonard S; Bailey, James J; Childers, Rory; Deal, Barbara J; Hancock, E William; van Herpen, Gerard; Kors, Jan A; Macfarlane, Peter; Mirvis, David M; Pahlm, Olle; Rautaharju, Pentti; Wagner, Galen S; Josephson, Mark; Mason, Jay W; Okin, Peter; Surawicz, Borys; Wellens, Hein

    2007-03-13

    This statement examines the relation of the resting ECG to its technology. Its purpose is to foster understanding of how the modern ECG is derived and displayed and to establish standards that will improve the accuracy and usefulness of the ECG in practice. Derivation of representative waveforms and measurements based on global intervals are described. Special emphasis is placed on digital signal acquisition and computer-based signal processing, which provide automated measurements that lead to computer-generated diagnostic statements. Lead placement, recording methods, and waveform presentation are reviewed. Throughout the statement, recommendations for ECG standards are placed in context of the clinical implications of evolving ECG technology.

  16. Recommendations for the standardization and interpretation of the electrocardiogram: part I: The electrocardiogram and its technology: a scientific statement from the American Heart Association Electrocardiography and Arrhythmias Committee, Council on Clinical Cardiology; the American College of Cardiology Foundation; and the Heart Rhythm Society: endorsed by the International Society for Computerized Electrocardiology.

    Science.gov (United States)

    Kligfield, Paul; Gettes, Leonard S; Bailey, James J; Childers, Rory; Deal, Barbara J; Hancock, E William; van Herpen, Gerard; Kors, Jan A; Macfarlane, Peter; Mirvis, David M; Pahlm, Olle; Rautaharju, Pentti; Wagner, Galen S; Josephson, Mark; Mason, Jay W; Okin, Peter; Surawicz, Borys; Wellens, Hein

    2007-03-13

    This statement examines the relation of the resting ECG to its technology. Its purpose is to foster understanding of how the modern ECG is derived and displayed and to establish standards that will improve the accuracy and usefulness of the ECG in practice. Derivation of representative waveforms and measurements based on global intervals are described. Special emphasis is placed on digital signal acquisition and computer-based signal processing, which provide automated measurements that lead to computer-generated diagnostic statements. Lead placement, recording methods, and waveform presentation are reviewed. Throughout the statement, recommendations for ECG standards are placed in context of the clinical implications of evolving ECG technology.

  17. Technology Reference Model (TRM) Reports: Technology/Standards Decisions Report

    Data.gov (United States)

    Department of Veterans Affairs — The One VA Enterprise Architecture (OneVA EA) is a comprehensive picture of the Department of Veterans Affairs' (VA) operations, capabilities and services and the...

  18. Technology Reference Model (TRM): Technology/Standard List

    Data.gov (United States)

    Department of Veterans Affairs — The One VA Enterprise Architecture (OneVA EA) is a comprehensive picture of the Department of Veterans Affairs' (VA) operations, capabilities and services and the...

  19. 新一代产品几何技术规范(GPS)标准体系及关键技术探讨%Research on the Improved GPS Standard System and Its Key Technologies

    Institute of Scientific and Technical Information of China (English)

    马利民; 王淑珍; 蒋向前; 李柱; 徐振高

    2004-01-01

    产品几何技术规范(GPS)是一套有关工件几何学的规范,它覆盖了尺寸、尺度、几何公差和表面几何性能的标准.新一代GPS系统是一套新的产品开发与制造工程工具.该文阐述了新一代GPS标准体系的结构、特点及关键技术,并介绍了新一代GPS标准的研究现状.%Dimensional and Geometrical Product Specification and Verification (GPS) is a specification of the product geometry, which covers the standards of the size, dimension, geometrical tolerancing and surface texture of geometrical product. The new GPS system is an improved engineering tool for product development and manufacturing. This paper presents the matrix model of the improved GPS stgandards, and its characteristics and key technologies. In the last, the new researching contents of GPS in the future is introduced.

  20. 标准联盟主导企业标准创新对成员企业的影响--研发投入强度、技术距离与超常收益%The Influence of Dominant Firm’s Standard Innovation on Member Firms in a Standard Alliance:R & D Intensity,Technological Distance and Abnormal Return

    Institute of Scientific and Technical Information of China (English)

    王硕; 杨蕙馨; 王军

    2015-01-01

    建立标准联盟是企业参与标准竞争的重要战略手段。本文以“开放手机联盟”为研究对象,通过事件研究法和多元回归法研究手机操作系统主导企业谷歌公司2010—2012年安卓(Android)系统重大技术升级对联盟成员企业产生的异质性影响,重点从成员企业角度探讨成员企业研发投入强度和技术距离在此过程中的作用。研究表明,联盟内不同类型的企业在主导企业对技术标准进行创新的过程中受到不一致的影响,成员企业研发投入强度与超常收益之间存在显著负向关系;技术距离以 U 型方式调节投入强度对超常收益的负向影响强度。%Establishing standards alliance is an important strategy for the enterprises to participate standards competition.The sample of this paper consists of panel data for the member companies of “open handset alliance”(OHA) from 2010 to 2012.Using event study and MLR,the paper observes the heterogeneous influence of Android system’s major updates launched by the dominant company of OHA—Google inc.—during these three years on other members,and especially explores the function of both R&D intensity and technological distances between the members and the dominant companies in the process.The results show that the respective R&D intensity has a negative effect on abnormal return. Moreover,technological distance moderates the effect of the R&D intensity on abnormal return in a U-curvilinear way.

  1. Factors of Engagement: Professional Standards and the Library Science Internship

    Science.gov (United States)

    Dotson, Kaye B.; Dotson-Blake, Kylie P.

    2015-01-01

    In today's technological world, school librarians planning to be leaders should be ready to keep up with advances in standards significant to the profession. The professional standards, specifically American Association of School Librarians (AASL) Standards and International Society for Technology in Education (ISTE) Standards for Coaches offer…

  2. Technology development and technology gap among Latin American countries

    OpenAIRE

    Serrano Moya, Edgar David

    2014-01-01

    Objective: to study the source of the technology gaps amongst some Latin American countries and to identify whether a regional system of technological progress may be strengthened. ethodology: technology development within some Latin America countries was researched based on the technology frontier concept. In order to do that, the technological advancement of such countries was compared using standard variables and institutional systems. The concept and scope of the technology frontier, whic...

  3. SITE TECHNOLOGY CAPSULE: IITRI RADIO FREQUENCY HEATING TECHNOLOGY

    Science.gov (United States)

    Radio frequency heating (RFH) technologies use electromagnetic energy in the radio frequency (RF) band to heat soil in situ, thereby potentially enhancing the performance of standard soil vapor extraction (SVE) technologies. Contaminants are removed from in situ soils and transfe...

  4. Standards for bullets and casings

    Directory of Open Access Journals (Sweden)

    J.F Song

    2002-11-01

    The Office of Law Enforcement Standards (OLES at the National Institute of Standards and Technology (NIST manages research in many different disciplines of forensic science. One of these projects supports the National Integrated Ballistics Information Network (NIBIN. NIST digitized six bullet signatures from samples provided by the Bureau of Alcohol, Tobacco, and Firearms (ATF and the Federal Bureau of Investigation (FBI. Using these signatures as a virtual standard, NIST’s Instrument Shop manufactured 20 reference materials (RM 8240 standard bullets using a numerically-controlled diamond turning machine. Test results show high reproducibility of the bullet signatures on standard bullets. NIST has also developed a new parameter for bullet signature comparisons, using autocorrelation functions, and proposed a diagram for tracing local ballistics measurements to the National Laboratory Center of the ATF and to the FBI. Using an electro-forming process, NIST has manufactured prototype standard casings and test results show high reproducibility for the casing signatures.

  5. On the Development of Teacher Competence Standards of Electronic Technology Majors in Secondary Vocation Schools---A Research Based on the Development Mode of IBSTPI Teacher Competency Standards%论中职电子技术类专业教师能力标准的开发--一项基于IBSTPI教师能力标准开发模式的研究

    Institute of Scientific and Technical Information of China (English)

    计宏炜

    2015-01-01

    The electronic technology is one of key development directions of vocational schools in recent years .So, the development of professional teacher competency standards and its logical thinking is very important .By a theo-retical analysis of teacher competency standards , the author believes that the competence structure of this major should be a competence system based on the improvement of universal and academic competence of students and taking vocational competence as its core .The paper combines with the development mode of abroad IBSTPI teacher competency standards ,constructs the framework of teaching competency standards for Electronic Technology majors .%电子技术是近些年来中职学校发展的重点方向之一,制定该专业教师能力标准和开发的逻辑思路显得尤为重要。通过对教师能力标准开发进行理论分析认为,该专业的能力结构应当是以提高学生普适性能力和学科能力为基础、职业能力为核心的能力体系。结合国外IBSTPI教师能力标准开发模式,构建了电子技术类专业的教师教学能力标准框架。

  6. Codes and Standards Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The Hydrogen Codes and Standards Tech Team (CSTT) mission is to enable and facilitate the appropriate research, development, & demonstration (RD&D) for the development of safe, performance-based defensible technical codes and standards that support the technology readiness and are appropriate for widespread consumer use of fuel cells and hydrogen-based technologies with commercialization by 2020. Therefore, it is important that the necessary codes and standards be in place no later than 2015.

  7. Mathematics Teacher TPACK Standards and Development Model

    Science.gov (United States)

    Niess, Margaret L.; Ronau, Robert N.; Shafer, Kathryn G.; Driskell, Shannon O.; Harper, Suzanne R.; Johnston, Christopher; Browning, Christine; Ozgun-Koca, S. Asli; Kersaint, Gladis

    2009-01-01

    What knowledge is needed to teach mathematics with digital technologies? The overarching construct, called technology, pedagogy, and content knowledge (TPACK), has been proposed as the interconnection and intersection of technology, pedagogy, and content knowledge. Mathematics Teacher TPACK Standards offer guidelines for thinking about this…

  8. The Genomic Standards Consortium.

    Directory of Open Access Journals (Sweden)

    Dawn Field

    2011-06-01

    Full Text Available A vast and rich body of information has grown up as a result of the world's enthusiasm for 'omics technologies. Finding ways to describe and make available this information that maximise its usefulness has become a major effort across the 'omics world. At the heart of this effort is the Genomic Standards Consortium (GSC, an open-membership organization that drives community-based standardization activities, Here we provide a short history of the GSC, provide an overview of its range of current activities, and make a call for the scientific community to join forces to improve the quality and quantity of contextual information about our public collections of genomes, metagenomes, and marker gene sequences.

  9. Hazard Communication Standard

    Energy Technology Data Exchange (ETDEWEB)

    Sichak, S.

    1991-01-01

    The current rate of technological advances has brought with it an overwhelming increase in the usage of chemicals in the workplace and in the home. Coupled to this increase has been a heightened awareness in the potential for acute and chronic injuries attributable to chemical insults. The Hazard Communication Standard has been introduced with the desired goal of reducing workplace exposures to hazardous substances and thereby achieving a corresponding reduction in adverse health effects. It was created and proclaimed by the US Department of Labor and regulated by the Occupational Safety and Health Administration. 1 tab.

  10. Non-standard antennas

    CERN Document Server

    Le Chevalier, Francois; Staraj, Robert

    2013-01-01

    This book aims at describing the wide variety of new technologies and concepts of non-standard antenna systems - reconfigurable, integrated, terahertz, deformable, ultra-wideband, using metamaterials, or MEMS,  etc, and how they open the way to a wide range of applications, from personal security and communications to multifunction radars and towed sonars, or satellite navigation systems, with space-time diversity on transmit and receive. A reference book for designers  in this lively scientific community linking antenna experts and signal processing engineers.

  11. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 2. Research study on promotion of international cooperation (standardization of hydrogen energy technology); Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 2. Kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This paper describes the basic study on standardization of hydrogen energy technology, and the research study on ISO/TC197 in fiscal 1996. As a part of the WE-NET project, the subtask 2 aims at preparation of standards necessary for practical use and promotion. Developmental states in every field of hydrogen energy technologies, current states of domestic/overseas related standards and laws, and needs and issues of standardization were surveyed. In particular, the needs and issues were clarified in relation to existing standards and laws from the viewpoint of specific hydrogen property. ISO/TC197 was established in 1989 for standardization of the systems and equipment for production, storage, transport, measurement and utilization of hydrogen energy. Four working groups are in action for the supply system and tank of liquid hydrogen fuel for automobiles, the container and ship for complex transport of liquid hydrogen, the specifications of hydrogen products for energy, and the hydrogen supply facility for airports. The draft international standards were proposed to the international conference in 1996. 16 refs., 21 figs., 41 tabs.

  12. Let's talk On Household Appliances Standardization

    Institute of Scientific and Technical Information of China (English)

    Liu Rongfu; Koch; Zhu Yongding; Wan Xiu; Huang Hui; Ye Jianrong; Zeng Zhanhui; Han Run; Cai Caide; Deng Yiwei

    2011-01-01

    As the em of standards arrived,the developed countries have moved from the era of technology to the era of standards and are implementing standards strategy instead of technology strategy.As a leader in water processing in China,Qinyuan,will pay more attention to the development ofintemational standards and policy coordination,taking advantage of the globalization to develop more standards that are favorable to our country's economy and safety so as to take over the commanding height in international water processing market.

  13. Towards an international address standard

    CSIR Research Space (South Africa)

    Coetzee, S

    2008-02-01

    Full Text Available Initiative in Section 5, with a focus on the South African National Accessibility Portal component (referred to as NAP) which forms the basis of our research. We present a NAP presentation technology analysis in Section 6. Section 7... in a better user experience. Standards compliance allows for the separation of concerns: HTML for content, Cascading Style Sheets (CSS) for presentation and JavaScript for dynamic behaviour. Standards compliant documents are also...

  14. Development of standards of main oil products and progress of production technologies%炼油主要产品标准的发展历程与生产技术进步

    Institute of Scientific and Technical Information of China (English)

    华炜; 宋以常; 王治春

    2013-01-01

    series of new process and technologies such as mild hydrocracking process (RMC) for production of high quality diesel and hydrocracking tail oil,gasoline isomerization desulfurization process (RIDOS),RICH process for improvement of cetane number of low-quality diesel,MIP-CGP process for reduction of olefins in FCC gasoline,S-Zorb process for absorption desulfurization of FCC gasoline,RTS process for diesel ultra-deep hydrodesulfurization,etc.The motor gasoline and diesel were upgraded from Euro-Ⅰ standard to Euro-Ⅴ standard in 12 years from 2000 to 2012.SINOPEC Beijing Yanshan Company,which is an experiment base of gasoline and diesel of SINOPEC has verified the above-mentioned state-of-the-art processes and technologies,which provide good conditions for gasoline and diesel upgrading of petroleum refineries in China.

  15. The Copyright Issue on Chinese Standards

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ 1. Introduction Standardization is an important fundamental technical work for national economic and social development.With the economic globalization and fast development of science and technology, standards have gone deep into many fields of the economy and social life, the importance of standards is becoming more and more prominent.

  16. 1996 DOE technical standards program workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  17. 1996 DOE technical standards program workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  18. New technologies incorporated to the standards of secondary voltage electric power distribution: pad-mounted transformers, condominium underground network and electronic measurements; Novas tecnologias incorporadas aos padroes de fornecimento de energia eletrica em tensao secundaria de distribuicao: transformadores pedestal, redes subterraneas em condominios e medicao eletronica

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Edilson L.; Silva, Francisco L.; Oliveira, Joao J.S.; Aguillera, Marco A. [ELETROPAULO, Sao Paulo, SP (Brazil). E-mail: joaosantos@eletropaulo.com.br

    1999-07-01

    This paper presents a general view on the new technologies, available in the electric power industry, incorporated to the standards of electric power supplying for secondary voltage distribution, and also the utilization of electronic meters, EURIDIS protocol and bus-way type bars.

  19. Desenvolvimento tecnológico, padronização de comportamentos no trabalho e exclusão social Technological development, behavior standardization at work and social exclusion

    Directory of Open Access Journals (Sweden)

    Denise Alves Guimarães

    2008-12-01

    , there is an intensification of the social exclusion at work and by work, as the employees become part of a category "strangers" or "foreigners" as of the classification "unemployed" or "disqualified", or even "not adjusted". The present article aims at bringing some reflections on the process of social exclusion at and by work, considering its relation with the technological development process. Discussions will be conducted as theoretical essays from texts by Benjamin and Simmel, who deal with the "foreigner" and with the ideas developed by Mumford and Marcuse about the technological development. Additionally we tried to establish an analysis on how psychologists working in organizations can be seen in a productive system: developing ways of social control or promoting health in the working environment, keeping themselves away from the practice of excessive standardization and leveling of behavior.

  20. Application of video surveillance technology in the online inspection system of university standard exam center%视频监控技术在标准化考点网上巡查系统中的应用

    Institute of Scientific and Technical Information of China (English)

    秦道祥

    2014-01-01

    高校标准化考点网上巡查系统是基于 IP 网络智能视频监控技术上建立起来的综合性教育考试管理业务应用系统。该系统由前端、传输、存储、显示/控制四个部分组成。建成后的网上巡查系统可以通过监控管理平台,对考场内的音视频图像进行采集、传输、存储、实时监控及对历史音视频数据进行检索、回放、下载等操作,可以做到考试全过程监控,起到事前监督、事中控制、事后取证的作用。%The online inspection system of university standard exam center is based on IP networks intelligent video surveillance technology to build up a comprehensive Educational testing management application. The system consists of front-end, transmission, storage, display/control of four parts. After the completion of the inspection system can be monitored online management platform for audio and video within the examination room for the collection, transmission, storage, real-time monitoring and historical audio and video data retrieval, playback, downloads and other operations. The system can monitor the entire process of examination, with early supervision, intermediate control, after forensics role.

  1. 77 FR 21538 - Announcing DRAFT Revisions to Federal Information Processing Standard (FIPS) 186-3, Digital...

    Science.gov (United States)

    2012-04-10

    ... National Institute of Standards and Technology Announcing DRAFT Revisions to Federal Information Processing... approve Federal Information Processing Standards (FIPS). NIST activities to develop computer security... National Institute of Standards and Technology (NIST) requests comments on revisions to Federal...

  2. Handbook of vacuum technology

    CERN Document Server

    2016-01-01

    This comprehensive, standard work has been updated to remain an important resource for all those needing detailed knowledge of the theory and applications of vacuum technology. With many numerical examples and illustrations to visualize the theoretical issues.

  3. Journal standards.

    Science.gov (United States)

    Jackson, R

    2003-08-01

    Despite its many imperfections, the peer review process is a firmly established quality control system for scientific literature. It gives readers some assurance that the work and views that are reported meet standards that are acceptable to a journal. Maureen Revington's editorial in a recent issue of the Australian Veterinary Journal (Revington2002) gives a good concise warts and all overview of the process and is well worth reading. I have some concerns about several articles in the December 2002 issue of the New Zealand Veterinary Journal (Volume 50, Number 6), devoted to the health and welfare of farmed deer, that relate to extensive citing of non-peer reviewed papers. I can understand the need for information to flow from researchers to the wider community but that need is already satisfied by publications such as the proceedings of the Deer Branch of the New Zealand Veterinary Association and Proceedings of the New Zealand Society of Animal Production. Non-peer reviewed papers have been cited in the Journal in the past but never to the extent displayed in this particular issue. It degrades the peer-review process and creates an added burden for reviewers who are forced to grapple with the uncertainties of the science in non-peer reviewed citations. One of my fears is that this process allows science from non peer reviewed articles to be legitimised by its inclusion in a peer reviewed journal and perhaps go on to be accepted as dogma. This is a real danger given the difficulties associated with tracing back to original citations and the increasing volume of scientific literature. It also affords opportunities for agencies to pick up questionable and doubtful science and tout it as support for their products or particular points of view. If deer researchers choose to publish most of their work in proceedings then so be it. However this approach, which seems to becoming increasingly prevalent in the deer sector, is questionable from an established science point

  4. Challenges to 5G standardization

    DEFF Research Database (Denmark)

    Mihovska, Albena D.; Prasad, Ramjee

    2013-01-01

    Interoperable, ubiquitous and dynamic are key objectives for fifth-generation (5G) communication systems and applications. These characteristics are also at the core of the main challenges that researchers, manufacturers, regulators and standardization bodies face when designing targeted strategies...... for the successful deployment of 5G enabling technologies....

  5. Open Source and Open Standards

    NARCIS (Netherlands)

    Koper, Rob

    2006-01-01

    Publication reference: Koper, R. (2008). Open Source and Open Standards. In J. M. Spector, M. Merrill, J. van Merriënboer & M. P. Driscol (Eds.), Handbook of Research on Educational Communications and Technology (3rd ed., pp. 355-368). New York: Routledge.

  6. Challenges to 5G standardization

    DEFF Research Database (Denmark)

    Mihovska, Albena D.; Prasad, Ramjee

    2013-01-01

    Interoperable, ubiquitous and dynamic are key objectives for fifth-generation (5G) communication systems and applications. These characteristics are also at the core of the main challenges that researchers, manufacturers, regulators and standardization bodies face when designing targeted strategies...... for the successful deployment of 5G enabling technologies....

  7. Castles, Kings...and Standards.

    Science.gov (United States)

    Drake, Susan M.

    2001-01-01

    Standards can help integrate a curriculum, as a fourth-grade teacher discovered when implementing a unit on the Middle Ages. Students created a medieval fair that demonstrated their learning in medieval history (social studies), pulleys and gears (science and technology), story telling (language arts), and costume and dance (fine arts). (MLH)

  8. Study on the Standard on Cold Chain Quality Safety in Central Kitchen Standard and Application of Traceability Information Technology%中央厨房冷链质量安全标准及可追溯信息技术应用

    Institute of Scientific and Technical Information of China (English)

    赵帅; 李学工

    2016-01-01

    从食品冷链现代化和食品安全出发,建立中央厨房冷链物流质量管理的理论框架,把质量管理的领域拓展到产品整个生命周期.依据冷链物流质量安全管理理论,建立明确的质量安全标准,并通过可追溯信息化技术的应用,协助中央厨房获取冷链质量安全管理需求,并以更有效的方式快速地响应需求,支持中央厨房通过实现产品创新、管理创新、服务创新来提高顾客的满意度,从而保持并扩大企业产品的市场份额,提高企业的综合竞争力.%Starting from the modernization of food cold chain and food safety, this paper tries to establish the theoretical framework for quality management of central kitchen cold-chain logistics, expanses the scope of quality management across the whole product life cycle. According to the theory, quality safety standards shall be developed through the application of traceability information technology, helping to obtain cold chain quality safety management requirements, and in a more efficient way to quickly response to the demand, support the central kitchen to improve customer satisfaction by implementing product innovation, management innovation, service innovation , so as to maintain and enlarge the market share of enterprise products and improve the comprehensive competitiveness of enterprise.

  9. Japanese National Safety Standards for Electrical Equipment

    Institute of Scientific and Technical Information of China (English)

    Junkichi Sumiya

    2006-01-01

    @@ I am working in Japan electrical safety & environment technology laboratory, which is called JET for short. In JET, we are carrying out the safety test of electrical equipment according to Japanese domestic standards or IEC standards. And in my section, our stuff is drafting some national safety standards harmonized with IEC in cooperation with the government. The standards are applied for the mandatory regulation and other schemes.

  10. Setting Standards: Three Tales and a Proposition

    DEFF Research Database (Denmark)

    Knudsen, Mette Præst; Nielsen, Jørgen Ulff-Møller; Pedersen, Kurt

    2001-01-01

    - and the standards. The background may be industry policy in combination with the nature of the technology and the products. The battle thus may turn into a battle between the market and the administrators. This paper presents three industry cases, one representing the pure market solution, and two presenting......Technological development has a tendency to be reflected in standards. In some cases, the market is the vehicle for defining standards that will be the outcome of a competitive battle between (groups of) firms. In other cases authorities will attempt to influence the technology process...

  11. Implementing PAT with Standards

    Science.gov (United States)

    Chandramohan, Laakshmana Sabari; Doolla, Suryanarayana; Khaparde, S. A.

    2016-02-01

    Perform Achieve Trade (PAT) is a market-based incentive mechanism to promote energy efficiency. The purpose of this work is to address the challenges inherent to inconsistent representation of business processes, and interoperability issues in PAT like cap-and-trade mechanisms especially when scaled. Studies by various agencies have highlighted that as the mechanism evolves including more industrial sectors and industries in its ambit, implementation will become more challenging. This paper analyses the major needs of PAT (namely tracking, monitoring, auditing & verifying energy-saving reports, and providing technical support & guidance to stakeholders); and how the aforesaid reasons affect them. Though current technologies can handle these challenges to an extent, standardization activities for implementation have been scanty for PAT and this work attempts to evolve them. The inconsistent modification of business processes, rules, and procedures across stakeholders, and interoperability among heterogeneous systems are addressed. This paper proposes the adoption of specifically two standards into PAT, namely Business Process Model and Notation for maintaining consistency in business process modelling, and Common Information Model (IEC 61970, 61968, 62325 combined) for information exchange. Detailed architecture and organization of these adoptions are reported. The work can be used by PAT implementing agencies, stakeholders, and standardization bodies.

  12. Standard biological parts knowledgebase.

    Science.gov (United States)

    Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M; Gennari, John H

    2011-02-24

    We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

  13. Standard biological parts knowledgebase.

    Directory of Open Access Journals (Sweden)

    Michal Galdzicki

    Full Text Available We have created the Knowledgebase of Standard Biological Parts (SBPkb as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org. The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org. SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL, a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

  14. Insulin pump risks and benefits: a clinical appraisal of pump safety standards, adverse event reporting, and research needs: a joint statement of the European Association for the Study of Diabetes and the American Diabetes Association Diabetes Technology Working Group.

    Science.gov (United States)

    Heinemann, Lutz; Fleming, G Alexander; Petrie, John R; Holl, Reinhard W; Bergenstal, Richard M; Peters, Anne L

    2015-04-01

    -world setting; such data could provide vital information to help health care teams to educate and support users and thereby prevent AEs. As well as requiring more from the manufacturing companies, we call for public funding of more research addressing clinically important questions in relation to pump therapy: both observational studies and clinical trials. At present, there are significant differences in the regulatory systems between the US and European Union at both pre- and postmarketing stages; improvements in the European system are more urgently required. This statement concludes with a series of recommended specific actions for "meknovigilance" (i.e., a standardized safety approach to technology) that could be implemented to address the shortcomings we highlight.

  15. Standard for Bamboo and its International Trend

    Institute of Scientific and Technical Information of China (English)

    WANGZhaohui; JIANGZehui; SUNQixiang

    2004-01-01

    The discussion on the present status of standards for bamboo is made. The main group has 15 standards related to bamboo-based panel, bamboo-based panel for form and container with bamboo-based panel. The main technological parameters and making of main types of bamboo-based panels in standards have been analyzed for readers to understand the related standards more easily. Analysis of influence of new national standards of indoor decorating and refurbishing materials on standards for bamboo-based panels in China has been done. The paper compares Chinese standard on methods of tests for bamboo with the respective Indian standard. It is tested that speed' s influence on result of bamboo properties by the experimental data. It is possible to reunite some standards on bamboo in China and India into the uniform international standards on the basis of absorption of the reasonable parts. All the standards for bamboo will be changed with the development of bamboo products and technological process. The paper analyzes the insufficient aspects of the standards and proposes the trend toward international standards. A good standard not only promotes bamboo to well recycling utilization but also mitigates the press of protection of natural forest to realize sustainable development forest.

  16. Technology Education Professional Enhancement Project

    Science.gov (United States)

    Hughes, Thomas A., Jr.

    1996-01-01

    The two goals of this project are: the use of integrative field of aerospace technology to enhance the content and instruction delivered by math, science, and technology teachers through the development of a new publication entitled NASA Technology Today, and to develop a rationale and structure for the study of technology, which establishes the foundation for developing technology education standards and programs of the future.

  17. A Comparison of Cross-Sector Cyber Security Standards

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2005-09-01

    This report presents a review and comparison (commonality and differences) of three cross-sector cyber security standards and an internationally recognized information technology standard. The comparison identifies the security areas covered by each standard and reveals where the standards differ in emphasis. By identifying differences in the standards, the user can evaluate which standard best meets their needs. For this report, only cross-sector standards were reviewed.

  18. Current Status and Future Prospects of Hydroelectricity Standardization

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Technical standardization is very essential to electricity industry, which plays an active role in many aspects including technology standardization, secure and economic operation of power systems, environment protection, technological progress, and improvement of enterprises' management. This paper introduces the current status of hydroelectricity standardization, summarizes the progress and achievements, and then points out the development direction and working target in the future.

  19. Current Status and Future Prospects of Hydroelectricity Standardization

    Institute of Scientific and Technical Information of China (English)

    Liu Yongdong

    2010-01-01

    @@ Technical standardization is very essential to electricity industry, which plays an active role in many aspects including technology standardization, secure and economic operation of power systems, environment protection, technological progress, and improvement of enterprises' management. This paper introduces the current status of hydroelectricity standardization, summarizes the progress and achievements, and then points out the development direction and working target in the future.

  20. 76 FR 22673 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-04-22

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY... notice in the Federal Register announcing an open meeting for the Technology Innovation Program Advisory... rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology Innovation Program (TIP)...

  1. Emergent technologies: 25 years

    Science.gov (United States)

    Rising, Hawley K.

    2013-03-01

    This paper will talk about the technologies that have been emerging over the 25 years since the Human Vision and Electronic Imaging conference began that the conference has been a part of, and that have been a part of the conference, and will look at those technologies that are emerging today, such as social networks, haptic technologies, and still emerging imaging technologies, and what we might look at for the future.Twenty-five years is a long time, and it is not without difficulty that we remember what was emerging in the late 1980s. Yet to be developed: The first commercial digital still camera was not yet on the market, although there were hand held electronic cameras. Personal computers were not displaying standardized images, and image quality was not something that could be talked about in a standardized fashion, if only because image compression algorithms were not standardized yet for several years hence. Even further away were any standards for movie compression standards, there was no personal computer even on the horizon which could display them. What became an emergent technology and filled many sessions later, image comparison and search, was not possible, nor the current emerging technology of social networks- the world wide web was still several years away. Printer technology was still devising dithers and image size manipulations which would consume many years, as would scanning technology, and image quality for both was a major issue for dithers and Fourier noise.From these humble beginnings to the current moves that are changing computing and the meaning of both electronic devices and human interaction with them, we will see a course through the changing technology that holds some features constant for many years, while others come and go.

  2. 1998 federal technical standards workshop: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  3. The Future of Geospatial Standards

    Science.gov (United States)

    Bermudez, L. E.; Simonis, I.

    2016-12-01

    The OGC is an international not-for-profit standards development organization (SDO) committed to making quality standards for the geospatial community. A community of more than 500 member organizations with more than 6,000 people registered at the OGC communication platform drives the development of standards that are freely available for anyone to use and to improve sharing of the world's geospatial data. OGC standards are applied in a variety of application domains including Environment, Defense and Intelligence, Smart Cities, Aviation, Disaster Management, Agriculture, Business Development and Decision Support, and Meteorology. Profiles help to apply information models to different communities, thus adapting to particular needs of that community while ensuring interoperability by using common base models and appropriate support services. Other standards address orthogonal aspects such as handling of Big Data, Crowd-sourced information, Geosemantics, or container for offline data usage. Like most SDOs, the OGC develops and maintains standards through a formal consensus process under the OGC Standards Program (OGC-SP) wherein requirements and use cases are discussed in forums generally open to the public (Domain Working Groups, or DWGs), and Standards Working Groups (SWGs) are established to create standards. However, OGC is unique among SDOs in that it also operates the OGC Interoperability Program (OGC-IP) to provide real-world testing of existing and proposed standards. The OGC-IP is considered the experimental playground, where new technologies are researched and developed in a user-driven process. Its goal is to prototype, test, demonstrate, and promote OGC Standards in a structured environment. Results from the OGC-IP often become requirements for new OGC standards or identify deficiencies in existing OGC standards that can be addressed. This presentation will provide an analysis of the work advanced in the OGC consortium including standards and testbeds

  4. CNPC's Ten Major Technological Events in 2004

    Institute of Scientific and Technical Information of China (English)

    Technological Development Department of CNPC

    2005-01-01

    @@ Editor's note: To make a timely introduction of the latest technologies developed by CNPC, Technological Development Department of CNPC entrusted Petroleum Economic & Technological Research Center of CNPC to appraise the oil company 's major technological developments. Based on three rounds of voting by nearly 100 oil experts, ten major technological events in 2004 are finally selected from more than 1 00 technological projects of CNPC according to the measurement standards of innovation, technological maturity, function and scientific value.

  5. The Emergence of De-facto Standards

    NARCIS (Netherlands)

    S. den Uijl (Simon)

    2015-01-01

    markdownabstractIncreasingly, companies compete on platform technologies that bring together groups of users in two-sided networks. Examples include smartphones and on-line search engines. In industries governed by platform technologies, it is common to see one emerging as the de-facto standard beca

  6. Technology Transfer and Technology Transfer Intermediaries

    Science.gov (United States)

    Bauer, Stephen M.; Flagg, Jennifer L.

    2010-01-01

    A standard and comprehensive model is needed to evaluate and compare technology transfer systems and the stakeholders within these systems. The principle systems considered include federal laboratories, U.S. universities, the rehabilitation engineering research centers (RERCs), and large small business innovation research programs. An earlier…

  7. National Agenda for Hydrogen Codes and Standards

    Energy Technology Data Exchange (ETDEWEB)

    Blake, C.

    2010-05-01

    This paper provides an overview of hydrogen codes and standards with an emphasis on the national effort supported and managed by the U.S. Department of Energy (DOE). With the help and cooperation of standards and model code development organizations, industry, and other interested parties, DOE has established a coordinated national agenda for hydrogen and fuel cell codes and standards. With the adoption of the Research, Development, and Demonstration Roadmap and with its implementation through the Codes and Standards Technical Team, DOE helps strengthen the scientific basis for requirements incorporated in codes and standards that, in turn, will facilitate international market receptivity for hydrogen and fuel cell technologies.

  8. Fiscal 1998 research report on International Clean Energy Network using Hydrogen Conversion (WE-NET). Subtask 2. Research on promotion of international cooperation (research on standardization of hydrogen energy technologies); 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET) sub task. 2. Kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on the basic research on standardization of hydrogen energy technologies, and ISO/TC197. As for the standardization, in relation to the hydrogen station in the WE-NET second phase research, the laws related to handling of gaseous hydrogen, and the basic issues on facility and safe handling were studied. As for ISO/TC197, the following draft standards were examined: Fuel supply system interface for liquid hydrogen vehicles, fuel tank for liquid hydrogen vehicles, container for liquid hydrogen transport, specification of hydrogen fuel, hydrogen fuel supply facility for air ports, gaseous hydrogen and hydrogen mixture fuel system for vehicles, gaseous hydrogen fuel connector for vehicles, gaseous hydrogen fuel tank for vehicles, and basic items for hydrogen system safety. Final examination of the fuel supply system interface for liquid hydrogen vehicles, and the specification of hydrogen fuel was finished, and these are scheduled to be registered for ISO. (NEDO)

  9. China's High Performance Computer Standard Commission Established

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ China's High Performance Computer Standard Commission was established on March 28, 2007, under the guidance of the Science and Technology Bureau of the Ministry of Information Industry. It will prepare relevant professional standards on high performance computers to break through the monopoly in the field by foreign manufacturers and vendors.

  10. Standards for K-12 Engineering Education?

    Science.gov (United States)

    National Academies Press, 2010

    2010-01-01

    The goal of this study was to assess the value and feasibility of developing and implementing content standards for engineering education at the K-12 level. Content standards have been developed for three disciplines in STEM education--science, technology, and mathematic--but not for engineering. To date, a small but growing number of K-12…

  11. Polyfluorinated substances in abiotic standard reference materials

    NARCIS (Netherlands)

    Reiner, J.L.; Blaine, A.C.; Higgins, C.P.; Kwadijk, C.J.A.F.

    2015-01-01

    The National Institute of Standards and Technology (NIST) has a wide range of Standard Reference Materials (SRMs) which have values assigned for legacy organic pollutants and toxic elements. Existing SRMs serve as homogenous materials that can be used for method development, method validation, and m

  12. Mobile communications and standards dynamics1

    NARCIS (Netherlands)

    Iversen, E.J.; Tee, R.

    2005-01-01

    This paper addresses the changing role that standards play in achieving interoperability and stability. It starts with a discussion of what standards dynamics means in this context which it explores in terms of a drive towards dominant design in technology markets. Here, the paper distinguishes two

  13. Incineration technologies

    CERN Document Server

    Buekens, Alfons

    2013-01-01

    Waste incineration is the art of completely combusting waste, while maintaining or reducing emission levels below current emission standards. Where possible, objectives include the recovering of energy as well as the  combustion residues.  Successful waste incineration makes it possible to achieve a deep reduction in waste volume, obtain a compact and sterile residue, and eliminate a wide array of pollutants. This book places waste incineration within the wider context of waste management, and demonstrates that, in contrast to landfills and composting, waste incineration can eliminate objectionable and hazardous properties such as flammability and toxicity, result in a significant reduction in volume, and destroy gaseous and liquid waste streams leaving little or no residues beyond those linked to flue gas neutralization and treatment. Moreover, waste incineration sterilizes and destroys putrescible matter, and produces usable heat.  Incineration Technologies first appeared as a peer-reviewed contribution ...

  14. The JPEG 2000 family of standards

    Science.gov (United States)

    Schelkens, Peter; Bruylants, Tim; Temmermans, Frederik; Barbarien, Joeri; Dooms, Ann; Munteanu, Adrian

    2009-02-01

    The Joint Photographic Experts Group (JPEG) committee is a joint working group of the International Standardization Organization (ISO) and the International Electrotechnical Commission (IEC). The word "Joint" in JPEG however does not refer to the joint efforts of ISO and IEC, but to the fact that the JPEG activities are the result of an additional collaboration with the International Telecommunication Union (ITU). Inspired by technology and market evolutions, i.e. the advent of wavelet technology and need for additional functionality such as scalability, the JPEG committee launched in 1997 a new standardization process that would result in 2000 in a new standard: JPEG 2000. JPEG 2000 is a collection of standard parts, which together shape the complete toolset. Currently, the JPEG 2000 standard is composed out of 13 parts. In this paper, we review these parts and additionally address recent standardization initiatives within the JPEG committee such as JPSearch, JPEG-XR and AIC.

  15. Construction of Fiber Standardization Demonstration Area to Be Started

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The China Fiber Inspection Bureau has announced that in 2007 it will reinforce the implementation of science, technologies, and standardization, and begin a project of constructing a fiber standardization demonstration area.

  16. Standards for Standardized Logistic Regression Coefficients

    Science.gov (United States)

    Menard, Scott

    2011-01-01

    Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…

  17. Instant standard concept for data standards development

    NARCIS (Netherlands)

    Folmer, E.; Kulcsar, I.Z.; Roes, J.

    2013-01-01

    This paper presents the current results of an ongoing research about a new data standards development concept. The concept is called Instant Standard referring to the pressure that is generated by shrinking the length of the standardization process. Based on this concept it is estimated that the dev

  18. Standards for Standardized Logistic Regression Coefficients

    Science.gov (United States)

    Menard, Scott

    2011-01-01

    Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…

  19. Electric Vehicle based on standard industrial components

    OpenAIRE

    Fernández Ramos, José; Aghili Kathir, Foroohar

    2013-01-01

    The aim of this paper is to presents the complete design of an electric vehicle by using standard industrial components as VRLA batteries, AC induction motors and standard frequency converters. In comparison with dedicated components, the use of standard components has the following advantages: higher reliability, low price, broad range of products and suppliers, and high availability and technological independence. Besides this, we show that these components allow to ...

  20. Research in Antenna Technology, Radar Technology and Electromagnetic Scattering Phenomena

    Science.gov (United States)

    2015-04-06

    AFRL-OSR-VA-TR-2015-0081 Research in Antenna Technology John Schindler ARCON CORP Final Report 04/06/2015 DISTRIBUTION A: Distribution approved for...a group of six researchers in the fields of electromagnetics, radar and antenna technology. Research was conducted during this reporting period in...Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 Research in Antenna technology, Radar Technology and Electromagnetic Scattering Phenomena

  1. The Critical Technology Difference between NFPA 326-2010 and Domestic Standards%NFPA 326-2010与国内标准关键性技术差异

    Institute of Scientific and Technical Information of China (English)

    李星星; 周彬

    2013-01-01

    It is difficult to eliminate tanks incident absolutely, because of more emphasis on incident course and reasons for tanks incident study. China tank cleaning standards are assessed, with prompting the idea of adopting foreign standards to improve domestic standards.NFPA 326-2010《Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair》is introduced, with the important technical difference between foreign and domestic standards. The advancement of NFPA 326-2010 lying in the safe inspection before tank cleaning operation, and tank medium isolation measurement, and tank gas inspection conditions, and tank allowable operation level marking. Finally, the adopting suggestion for NFPA 326-2010 to perfect domestic tank cleaning standards is made.%以往储罐事故研究侧重事件经过和原因,难以从根源上消除储罐事故。评价了储罐清洗国内标准现状,提出了借鉴国外标准先进条款改进国内标准的方法。介绍了美国消防协会标准NFPA 326-2010,列出了该标准与国内标准的关键性技术差异。该标准的先进性体现在储罐清洗前安全检查、储罐介质隔离措施、储罐气体检测和储罐允许作业级别标识等方面。最后提出了借鉴NFPA 326-2010完善储罐清洗国内标准的建议。

  2. 中美澳乳品蛋白质检测标准的比对研究%Study on comparison of the technology of protein content determination in dairy among China-US-AUS standards

    Institute of Scientific and Technical Information of China (English)

    李佳; 杨扬; 叶兴乾

    2011-01-01

    Proteins are the main components of dairy products and milk. Mainly methods specificed in available standards of the detection protein in dairy products are as follows: Kjeldahl method, near-infrared spectroscopy,UV absorption method and so on. To lay a strong standard basis to the formulation of standard of rational and effective detection of the protein content of dairy products in China,this article found out the standard of detection of the protein content of dairy products in China,the United States and Australia,translate the available standards of three countries above,and then make comparison of China-US-AUS standards on the determination of protein contents of dairy products.%蛋白质是乳品中的主要成分.各国现行标准中检测乳品中蛋白质的主要方法有:凯氏定氮法、近红外光谱分析、紫外吸收法等.本文通过检索中国、美国、澳大利亚三国对乳品蛋白质检测做出规定的现行标准,对查阅到的美国和澳大利亚标准进行翻译,并对上述三国关于乳品中蛋白质的检测标准进行技术比对,力求为制定合理有效的中国乳品蛋白质含量检测标准莫定有力的基础.

  3. Standardization in optical coating characterisation

    Institute of Scientific and Technical Information of China (English)

    D.Ristau

    2005-01-01

    In the rapid development course of laser technology and modern optics, optical metrology continuously gains importance for the quality management in the industrial production environment and also for research in optical coatings. Besides absorption and scatter losses, the spectral characteristics and laser induced damage thresholds are considered as common quality factors for coated optical components and often define the optimization targets for new products and applications. Also, these quality parameters are the basis for the comparison of commercial optics and can be found in the product catalogues of most manufacturers of optical components. As a consequence, standardization of characterisation procedures for these fundamental properties evolved to a crucial point for the optics industry. During the last decade, adapted standard measurement techniques have been elaborated and discussed by representatives from many industrial companies and research institutes within working groups of the International Organisation for Standardization (ISO). In this contribution, the current state of standardized characterisation techniques for optical coatings is summarised. Selected standards for the measurement of absorption (ISO 11551), scattering (ISO 13696) and laser induced damage thresholds (ISO 11254, Parts 1 and 2) will be described and discussed in view of their applicability and reproducibility. The report will be concluded by an outlook on the current projects and future tasks of standardization in optics characterisation.

  4. Research report for fiscal 1998 on the analysis of spread effect of technologies approved as international standards. Value web analysis and research; 1998 nendo kokusai hyojun ni ninteisareta gijutsu no hakyu koka bunseki chosa hokokusho. Value wave bunseki chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For contributing to the formulation of technology development programs, an analysis is conducted based on the concept of value web into which the economic spread effect is incorporated. As information technology plays an important role in the fields of automobiles and chemical materials, there are various fields the research and development efforts exerted in which are common to many others. As to what additional values are created when such separately developed technologies cross each other, a discussion is conducted using techniques of industry-oriented analyses. Findings obtained are mentioned below. When the numbers of essays relative to the respective industries are compared, it is found that 63% of the total number of biotechnological essays fall on agriculture, the drug industry, and the food industry. On the other hand, when it comes to the produce, related industries larger in marketing scale is more strongly influenced by the spread effect. The spread effect of biotechnology is distinguished in the drug industry, and that of information/communication technology in the information industry, electric and electronic industries, and in the semiconductor industry. (NEDO)

  5. [To accelerate pace of studying standard pieces of Chinese medicine as standard material].

    Science.gov (United States)

    Xiao, Yong-Qing; Li, Li; Liu, Ying

    2014-07-01

    To elucidate the necessary and research of accelerating basic research of Chinese standard pieces as standard materials. According to over 10 years accumulated experience and be keenly aware of the author, the evaluation method of standardized processing technology and Chinese pieces quality, aimed at consummated the standard material of the quality evaluation of Chinese herbal pieces at the current situation, and inaccordance with the need of improving quality standard system of Chinese herbal pieces, illustrate the necessity of accelerating basic research of Chinese standard pieces as standard materials; from the technical specification for collecting and processing of raw materials, and the technical specification, homogenized sample, packaging, storage and etc., for processing of candidate standard pieces, determine the methods and steps of technical specifications for standard pieces as the standard substance, determine the methods and steps of technical specifications for standard pieces as the standard substance. To speed up the basic research of standard of Chinese medicine pieces as of standard material is very necessary. The research objective is to specificate the processing technical for a number of standard pieces, to identify technical specifications and to ascertain the guiding principle and technical specification of decoction pieces as standard substance. This research will provide basic scientific data relevant national departments to apply for the accreditation of the standard substance.

  6. Standards help enterprises

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Standardization in modern times began from the Industrial Revolution. Various industrial sectors, for which about 300 standardization technical commissions have been established, make up the key fields of China's standardization.

  7. 75 FR 76185 - Federal Motor Vehicle Safety Standard, Rearview Mirrors; Federal Motor Vehicle Safety Standard...

    Science.gov (United States)

    2010-12-07

    ... Rearview Video Systems viii. Development of a Performance-Based or Technology-Neutral Standard ix. Other... scene and vehicle, as well as interviews of the involved parties when possible. When an on-site...

  8. Standard Reference Tables -

    Data.gov (United States)

    Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

  9. CHP Technologies

    Science.gov (United States)

    Learn about CHP technologies, including reciprocating engines, combustion turbines, steam turbines, microturbines, fuel cells, and waste heat to power. Access the Catalog of CHP Technologies and the Biomass CHP Catalog of Technologies.

  10. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  11. Standards for Tunnel and Road LED Lighting Application Technologies%上海市隧道、道路LED照明应用技术标准研究综述

    Institute of Scientific and Technical Information of China (English)

    杨方勤

    2014-01-01

    The paper summarizes the research on the development of standards for tunnels and roads LED lighting application in Shanghai, analyzes the existing problems on LED road lamps and lighting design, introduces the experiments and testing results, and summarizes current problems of LED street lighting, proposing that LED lighting energy conservation should be “systematic energy saving” throughout the full life cycle based on the integration of products and applications.

  12. The comparison of automatic sprinkler technologies in domestic and foreign standards%国内外规范中自动喷水灭火技术的对比分析

    Institute of Scientific and Technical Information of China (English)

    杨丙杰

    2012-01-01

    结合国内外标准规范的规定,从建筑类别方面对比分析了自动喷水灭火系统的设置场所和设置要求,分析了自动喷水灭火系统和火灾自动报警系统的协调关系.国外规范对于自动喷水灭火系统的规定较为详细,并依据人员活动能力将人员密集场所进行分级.提出我国规范修订时应考虑在居住建筑、老年人建筑和幼儿园建筑等场所增设自动喷水灭火系统或自动喷水局部应用系统.%Combined with domestic and foreign standards, the setting spaces and requirements of the automatic sprinkler system from the building category were compared. The coordinating relationship between automatic sprinkler system and automatic fire alarm system was analyzed. The foreign standards are detailed in automatic sprinkler system and assembly occupancies are classified according to the personnel activity ability. Suggestion is that setting up additional automatic sprinkler system in the residential buildings, buildings lived older people and kindergarten buildings should be considered in standard revision.

  13. The Landscape of Pervasive Computing Standards

    CERN Document Server

    Helal, Sumi

    2010-01-01

    This lecture presents a first compendium of established and emerging standards in pervasive computing systems. The lecture explains the role of each of the covered standards and explains the relationship and interplay among them. Hopefully, the lecture will help piece together the various standards into a sensible and clear landscape. The lecture is a digest, reorganization, and a compilation of several short articles that have been published in the "Standards and Emerging Technologies" department of the IEEE Pervasive Computing magazine. The articles have been edited and shortened o

  14. European standards and regulation - CEN/CENELEC

    Energy Technology Data Exchange (ETDEWEB)

    Caballero, J. [AENOR, Madrid (Spain)

    1997-02-27

    An overview is given of the European Standards structure, as well as the general Directives and Regulations related to the Heating, Ventilation and Air Conditioning Sector. The importance of standardisation, both on quality and as a strategic tool for manufacturers, is stressed. Participation in the elaboration of standards makes it possible to reflect a manufacturer`s technology in the standards. Voluntary standardisation can be used as a differentiating element. European standards for the HVAC sector are being elaborated by the European Standardisation Committee (CEN), the European Electrotechnical Standardisation Committee (CENELEC) and by the European Telecommunication Institute (ETSI)

  15. International Standardization of Bed Rest Standard Measures

    Science.gov (United States)

    Cromwell, Ronita L.

    2010-01-01

    This slide presentation gives an overview of the standardization of bed rest measures. The International Countermeasures Working Group attempted to define and agree internationally on standard measurements for spaceflight based bed rest studies. The group identified the experts amongst several stakeholder agencys. It included information on exercise, muscle, neurological, psychological, bone and cardiovascular measures.

  16. Achieving Technological Literacy: A National Imperative.

    Science.gov (United States)

    Bybee, Rodger W.

    2000-01-01

    Discusses the importance of technological literacy for the 21st century. Points out that, of the top 100 headlines of the 20th century, over 40 percent were related to technology, yet many people have an outdated notion of what technology really is. Discusses the need for standards of technological literacy. (JOW)

  17. Nuclear Data Verification and Standardization

    Energy Technology Data Exchange (ETDEWEB)

    Karam, Lisa R.; Arif, Muhammad; Thompson, Alan K.

    2011-10-01

    The objective of this interagency program is to provide accurate neutron interaction verification and standardization data for the U.S. Department of Energy Division of Nuclear Physics programs which include astrophysics, radioactive beam studies, and heavy-ion reactions. The measurements made in this program are also useful to other programs that indirectly use the unique properties of the neutron for diagnostic and analytical purposes. These include homeland security, personnel health and safety, nuclear waste disposal, treaty verification, national defense, and nuclear based energy production. The work includes the verification of reference standard cross sections and related neutron data employing the unique facilities and capabilities at NIST and other laboratories as required; leadership and participation in international intercomparisons and collaborations; and the preservation of standard reference deposits. An essential element of the program is critical evaluation of neutron interaction data standards including international coordinations. Data testing of critical data for important applications is included. The program is jointly supported by the Department of Energy and the National Institute of Standards and Technology.

  18. Jones' instrument technology

    CERN Document Server

    Jones, Ernest Beachcroft; Kingham, Edward G; Radnai, Rudolf

    1985-01-01

    Jones' Instrument Technology, Volume 5: Automatic Instruments and Measuring Systems deals with general trends in automatic instruments and measuring systems. Specific examples are provided to illustrate the principles of such devices. A brief review of a considerable number of standards is undertaken, with emphasis on the IEC625 Interface System. Other relevant standards are reviewed, including the interface and backplane bus standards. This volume is comprised of seven chapters and begins with a short introduction to the principles of automatic measurements, classification of measuring system

  19. Standards and standpoints

    DEFF Research Database (Denmark)

    Nissen, Morten

    2016-01-01

    This article argues that critique is a necessary component in any study of standards, just as it is implied in the concept of standard itself. From this follows the relevance of reflexively situating our research in relation to the cultural-historical development of standards and standardization...

  20. Arizona Academic Standards: Kindergarten

    Science.gov (United States)

    Arizona Department of Education, 2009

    2009-01-01

    This publication contains Arizona public schools' academic standards for kindergarten. The contents of this document include the following: (1) The Arts Standard 2006--Kindergarten; (2) Comprehensive Health Education/Physical Activity Standards 1997--Readiness (Kindergarten); (3) Foreign and Native Language Standards 1997--Readiness…

  1. Creating standards: Creating illusions?

    DEFF Research Database (Denmark)

    Linneberg, Mai Skjøtt

    written standards may open up for the creation of illusions. These are created when written standards' content is not in accordance with the perception standard adopters and standard users have of the specific practice phenomenon's content. This general theoretical argument is exemplified by the specific...

  2. The Dynamics of Standardization

    DEFF Research Database (Denmark)

    Brunsson, Nils; Rasche, Andreas; Seidl, David

    2012-01-01

    This paper suggests that when the phenomenon of standards and standardization is examined from the perspective of organization studies, three aspects stand out: the standardization of organizations, standardization by organizations and standardization as (a form of) organization. Following......, and show that, while standards and standardization are typically associated with stability and sameness, they are essentially a dynamic phenomenon. The paper highlights the contributions of this special issue to the topic of standards as a dynamic phenomenon in organization studies and makes suggestions...... a comprehensive overview of existing research in these three areas, we argue that the dynamic aspects of standardization are under-represented in the scholarly discourse. Furthermore, we identify the main types of tension associated with standardization and the dynamics they generate in each of those three areas...

  3. Health care technology assessment

    Science.gov (United States)

    Goodman, Clifford

    1994-12-01

    The role of technology in the cost of health care is a primary issue in current debates concerning national health care reform. The broad scope of studies for understanding technological impacts is known as technology assessment. Technology policy makers can improve their decision making by becoming more aware, and taking greater advantage, of key trends in health care technology assessment (HCTA). HCTA is the systematic evaluation of the properties, impacts, and other attributes of health care technologies, including: technical performance; clinical safety and efficacy/effectiveness; cost-effectiveness and other economic attributes; appropriate circumstances/indications for use; and social, legal, ethical, and political impacts. The main purpose of HCTA is to inform technology-related policy making in health care. Among the important trends in HCTA are: (1) proliferation of HCTA groups in the public and private sectors; (2) higher standards for scientific evidence concerning technologies; (3) methodological development in cost analyses, health-related quality of life measurement, and consolidation of available scientific evidence (e.g., meta-analysis); (4) emphasis on improved data on how well technologies work in routine practice and for traditionally under-represented patient groups; (5) development of priority-setting methods; (6) greater reliance on medical informatics to support and disseminate HCTA findings.

  4. Attributes and Dynamic Development Phases of ICT Standards Consortia

    OpenAIRE

    Pohlmann, Tim

    2010-01-01

    Standards consortia are private industry alliances that serve a certain purpose and gather likeminded companies that share the same interest to sponsor and develop technologies for standardization. Compared to formal standard setting, participation in consortia is less bureaucratic, more efficient in reacting to market needs and allows, in respect to the tiered membership structures, a strategic influence of standard setting outcomes. Formal standardization is in contrast an often protracted ...

  5. PV system testing and standards

    Science.gov (United States)

    DeBlasio, Richard

    1999-03-01

    The U.S. Department of Energy (DOE) PV Program System Performance and Engineering Project is being conducted by The National Renewable Energy Laboratory (NREL), Sandia National Laboratories (SNL), Southwest Technology Development Institute (SWTDI), and Florida Solar Energy Center (FSEC). It provides PV system, subsystem, and component-level technology-performance characterization testing; test-method development and validation; national and international consensus standards and codes development, test-facility product certification, and laboratory-accreditation program implementation; and information exchange and technical assistance to the PV community. Emphasis is placed on reducing technical and infrastructural barriers to system acceptance, reducing life-cycle cost of systems, providing systems-engineering best practices and guidelines, and leading the national effort in performance and reliability testing, and consensus standards, codes, and certification program development and implementation—thereby ensuring that PV systems meet customers' needs and expectations. A summary of project activities, accomplishments, and future plans is provided and highlighted by an overview of PV system test-procedure and standards development.

  6. Based on IEEE P1901 Standard for Next-.generation EoC Technology%基于IEEE P1901标准的下一代EoC技术

    Institute of Scientific and Technical Information of China (English)

    王洪新

    2011-01-01

    In this paper, Compare Intellons INT6400 Homeplug AV solutions with standards P1901 AR74XX chip, to illustrate the next generation based on P1901 EoC advantages.%以Intellon的HomePlug AV的解决方案INT6400和基于IEEE P1901标准的AR74XX芯片做对比,来说明基于IEEE P1901标准的下一代EoC技术的优点。

  7. Radiologic Technology Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a radiologic technology program. The guide contains four major sections. The General Information section contains an introduction giving an overview and defining purpose and objectives; a program description,…

  8. Low Noise Amplifier for 2.45 GHz Frequency Band at 0.18 μm CMOS Technology for IEEE Standard 802.11 b/g WLAN

    Directory of Open Access Journals (Sweden)

    Viranjay M. Srivastava

    2012-08-01

    Full Text Available This paper presents the design of low noise amplifier (LNA at 2.45 GHz and integrated at 0.18 µm RF CMOS process technology. This type of LNA at 2.45 GHz is use in the Bluetooth receiver. The proposed method is useful to optimize noise performance and power gain while maintaining good input and output matching. The amplifier is designed to be used as first stage of a receiver for wireless communication. The main aim of designer is to achieve low noise figure with improved gain with the help of CMOS technology by using single stage n-MOS amplifier. The simulation results show a forward gain of 14.0 dB, a noise-figure of 0.5 dB and stability factor is approximate unity, in which the circuit operates at 14.2 mA drain current with supply voltage of 3.5 V and biasing voltage of 1.5 V.

  9. 77 FR 13294 - Announcing Approval of Federal Information Processing Standard (FIPS) Publication 180-4, Secure...

    Science.gov (United States)

    2012-03-06

    ... National Institute of Standards and Technology Announcing Approval of Federal Information Processing... announces the Secretary of Commerce's approval of Federal Information Processing Standard (FIPS) Publication... announces the Secretary of Commerce's approval of Federal Information Processing Standard (FIPS)...

  10. IEEE 1393 Spaceborne Fiber Optic Data Bus: A Standard Approach to On-Board Payload Data Handling Networks for the AIAA Space Technology Conference and Exposition "Partnering in the 21th Century"

    Science.gov (United States)

    Andrucyk, Dennis J.; Orlando, Fred J.; Chalfant, Charles H.

    1999-01-01

    The Spaceborne Fiber Optic Data Bus (SFODB) is the next generation in on-board data handling networks. It will do for high speed payloads what SAE 1773 has done for on-board command and telemetry systems. That is, it will significantly reduce the cost of payload development, integration and test through interface standardization. As defined in IEEE 1393, SFODB is a 1 Gb/s, fiber optic network specifically designed to support the real-time, on-board data handling requirements of remote sensing spacecraft. The network is highly reliable, fault tolerant, and capable of withstanding the rigors of launch and the harsh space environment. SFODB achieves this operational and environmental performance while maintaining the small size, light weight, and low power necessary for spaceborne applications. SFODB was developed jointly by DoD and NASA GSFC to meet the on-board data handling needs of Remote Sensing satellites. This jointly funded project produced a complete set of flight transmitters, receivers and protocol ASICS; a complete Development & Evaluation System; and, the IEEE 1393 standard.

  11. 75 FR 62369 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2010-10-08

    ... Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board... address is rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology Innovation Program...

  12. CMM Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Robert C.

    2008-10-20

    This project addressed coordinate measuring machine (CMM) technology and model-based engineering. CMM data analysis and delivery were enhanced through the addition of several machine types to the inspection summary program. CMM hardware and software improvements were made with the purchases of calibration and setup equipment and new model-based software for the creation of inspection programs. Kansas City Plant (KCP) personnel contributed to and influenced the development of dimensional metrology standards. Model-based engineering capabilities were expanded through the development of software for the tolerance analysis of piece parts and for the creation of model-based CMM inspection programs and inspection plans and through the purchase of off-the-shelf software for the tolerance analysis of mechanical assemblies. An obsolete database application used to track jobs in Precision Measurement was replaced by a web-based application with improved query and reporting capabilities. A potential project to address the transformation of the dimensional metrology enterprise at the Kansas City Plant was identified.

  13. 77 FR 3232 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2012-01-23

    ... No: 2012-1184] DEPARTMENT OF COMMERCE National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT...

  14. 78 FR 292 - Visiting Committee on Advanced Technology

    Science.gov (United States)

    2013-01-03

    ...: 2012-31597] DEPARTMENT OF COMMERCE National Institute of Standards and Technology Visiting Committee on Advanced Technology AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of Public Meeting. SUMMARY: The Visiting Committee on Advanced Technology (VCAT or...

  15. Standardization as an Arena for Open Innovation

    Science.gov (United States)

    Grøtnes, Endre

    This paper argues that anticipatory standardization can be viewed as an arena for open innovation and shows this through two cases from mobile telecommunication standardization. One case is the Android initiative by Google and the Open Handset Alliance, while the second case is the general standardization work of the Open Mobile Alliance. The paper shows how anticipatory standardization intentionally uses inbound and outbound streams of research and intellectual property to create new innovations. This is at the heart of the open innovation model. The standardization activities use both pooling of R&D and the distribution of freely available toolkits to create products and architectures that can be utilized by the participants and third parties to leverage their innovation. The paper shows that the technology being standardized needs to have a systemic nature to be part of an open innovation process.

  16. TDT in Argentine and Chile: dynamics of power in the process of adoption of the technological standard ISDB-TB TDT en Argentina y Chile: las dinámicas de poder en el proceso de selección del estándar tecnológico ISDB-TB

    Directory of Open Access Journals (Sweden)

    Carla RODRÍGUEZ MIRANDA

    2012-02-01

    Full Text Available The article analyses the media policymaking process about the adoption of the technological standard for the digital terrestrial television in Argentine and Chile. The explorative and descriptive study inquires about the tensions, articulations and dynamics of the national and supranational parties (State, broadcasters, lobbies of technical standards and civil society that played in the politic process from the late 90s when the issue of digital television inserted into public agenda until August/September on 2009 when both countries adopted the Japanese- Brazilian technology system.El artículo analiza la formación de las políticas públicas de comunicación sobre la selección del estándar técnico para la televisión digital terrestre en Argentina y Chile. El estudio de carácter exploratorio y descriptivo indaga sobre las tensiones, articulaciones y dinámicas de los actores nacionales y supranacionales (Estado, radiodifusores, consorcios de las normas técnicas y sociedad civil que participaron en el proceso a partir de fines de la década de 1990, con la incorporación del tema de la televisión digital terrestre a la agenda pública, hasta agosto/septiembre de 2009 con la adopción del sistema japonés-brasileño

  17. Cloud Standardization: Consistent Business Processes and Information

    Directory of Open Access Journals (Sweden)

    Razvan Daniel ZOTA

    2013-01-01

    Full Text Available Cloud computing represents one of the latest emerging trends in distributed computing that enables the existence of hardware infrastructure and software applications as services. The present paper offers a general approach to the cloud computing standardization as a mean of improving the speed of adoption for the cloud technologies. Moreover, this study tries to show out how organizations may achieve more consistent business processes while operating with cloud computing technologies.

  18. Residential ventilation standards scoping study

    Energy Technology Data Exchange (ETDEWEB)

    McKone, Thomas E.; Sherman, Max H.

    2003-10-01

    The goals of this scoping study are to identify research needed to develop improved ventilation standards for California's Title 24 Building Energy Efficiency Standards. The 2008 Title 24 Standards are the primary target for the outcome of this research, but this scoping study is not limited to that timeframe. We prepared this scoping study to provide the California Energy Commission with broad and flexible options for developing a research plan to advance the standards. This document presents the findings of a scoping study commissioned by the Public Interest Energy Research (PIER) program of the California Energy Commission to determine what research is necessary to develop new residential ventilation requirements for California. This study is one of three companion efforts needed to complete the job of determining the ventilation needs of California residences, determining the bases for setting residential ventilation requirements, and determining appropriate ventilation technologies to meet these needs and requirements in an energy efficient manner. Rather than providing research results, this scoping study identifies important research questions along with the level of effort necessary to address these questions and the costs, risks, and benefits of pursuing alternative research questions. In approaching these questions and corresponding levels of effort, feasibility and timing were important considerations. The Commission has specified Summer 2005 as the latest date for completing this research in time to update the 2008 version of California's Energy Code (Title 24).

  19. Water Quality Standards Handbook

    Science.gov (United States)

    The Water Quality Standards Handbook is a compilation of the EPA's water quality standards (WQS) program guidance including recommendations for states, authorized tribes, and territories in reviewing, revising, and implementing WQS.

  20. Agent Standards Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation of the work herein proposed is the development of standards for software autonomous agents. These standards are essential to achieve software...

  1. Standards and standpoints

    DEFF Research Database (Denmark)

    Nissen, Morten

    2016-01-01

    This article argues that critique is a necessary component in any study of standards, just as it is implied in the concept of standard itself. From this follows the relevance of reflexively situating our research in relation to the cultural-historical development of standards and standardization....... The argument takes off from two different conceptualizations of standards in the literature. On the one hand, standards as immanent to practices (the “Neo-Aristotelian” approach), and on the other hand, standards as imposed to regulate practices (the “neo-pragmatist” and “governmentality” approaches......). It is suggested that this opposition can be superseded by articulating the former alternative, not as an essentialism of “practice,” but as the reflexive assumption of standpoint. Some intricacies of the articulation of standpoint are then discussed, concluding in a proposed dialectics of standard and standpoint....

  2. Policy,standard,regulation

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>Automobile Standardization Committee secretariat collects comments on the phase III fuel consumption level limit The Committee intends to formulate the standard based on a comprehensive evaluation of the previous two phases.

  3. Technology Maturity is Technology Superiority

    Science.gov (United States)

    2008-09-09

    Dominant Air Power: Design For Tomorrow…Deliver Today 2 TECHNOLOGY MATURITY CONFERENCE • ONE DEFINITION OF MATURITY – GOOD JUDGEMENT COMES FROM...EXPERIENCE—EXPERIENCE COMES FROM BAD JUDGEMENT Dominant Air Power: Design For Tomorrow…Deliver Today 3 TECHNOLOGY MATURITY CONFERENCE • THIS WILL BE A...2008 TECHNOLOGY MATURITY CONFERENCE “ TECHNOLOGY MATURITY IS TECHNOLOGY SUPERIORITY” Aeronautical Systems Center Dr. Tom Christian ASC/EN, WPAFB OH

  4. Radiologic Technology Occupations. Curriculum Guide.

    Science.gov (United States)

    Reneau, Fred; And Others

    This guide delineates the tasks and performance standards for radiologic technology occupations. It includes job seeking skills, work attitudes, energy conservation practices, and safety. The guide is centered around the three domains of learning: psychomotor, cognitive, and affective. For each duty, the following are provided: task, standard of…

  5. Using Digital Video Production to Meet the Common Core Standards

    Science.gov (United States)

    Nichols, Maura

    2012-01-01

    The implementation of the Common Core Standards has just begun and these standards will impact a generation that communicates with technology more than anything else. Texting, cell phones, Facebook, YouTube, Skype, etc. are the ways they speak with their friends and the world. The Common Core Standards recognize this. According to the Common Core…

  6. Collaboration Between Multistakeholder Standards

    DEFF Research Database (Denmark)

    Rasche, Andreas; Maclean, Camilla

    responsibility is unlikely to support a great variety of partly competing and overlapping standards. Increased collaboration between these standards would enhance both their impact and their adoption by firms. This report examines the nature, benefits, and shortcomings of existing multistakeholder standards...

  7. Questioning the Standard

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Dairy quality standards trigger further controversy China’s dairy industry is once again being scrutinized as suspicions abound that major dairy enterprises played a hand in manipulating and lowering quality standards to save costs.The new standards released in March 2010 set the maximum safety limit for bacteria in raw milk at 2 million cells per milliliter, four times

  8. Evidence Standards and Litigation

    DEFF Research Database (Denmark)

    Guerra, Alice; Luppi, Barbara; Parisi, Francesco

    aspect of the legal system: the evidence standard. We recast the conventional rent-seeking model to consider how alternative evidence standards affect litigation choices. We analyze the interrelation between different evidence standards, the effectiveness of the parties’ efforts, and the merits...

  9. Technology commercialization in road infrastructure: how government affects the variation and appropriability of technology

    NARCIS (Netherlands)

    Caerteling, Jasper; Halman, Johannes I.M.; Doree, Andries G.

    2008-01-01

    Successful technology commercialization is important for business profitability, and government policies can help or hinder firms' success. As a regulator, government affects standard setting and the nature and scope of property rights. As a sponsor, government can empower technology

  10. Technology commercialization in road infrastructure: how government affects the variation and appropriability of technology

    NARCIS (Netherlands)

    Caerteling, Jasper; Halman, Johannes I.M.; Doree, Andries G.

    2008-01-01

    Successful technology commercialization is important for business profitability, and government policies can help or hinder firms' success. As a regulator, government affects standard setting and the nature and scope of property rights. As a sponsor, government can empower technology commercializati

  11. Technology Commercialization in Road Infrastructure: How Government Affects the Variation and Appropriability of Technology

    NARCIS (Netherlands)

    Caerteling, Jasper S.; Halman, Johannes I.M.; Dorée, André G.

    2008-01-01

    Successful technology commercialization is important for business profitability, and government policies can help or hinder firms' success. As a regulator, government affects standard setting and the nature and scope of property rights. As a sponsor, government can empower technology commercializati

  12. Information Security Standards

    Directory of Open Access Journals (Sweden)

    Dan Constantin Tofan

    2011-09-01

    Full Text Available The use of standards is unanimously accepted and gives the possibility of comparing a personal security system with a given frame of reference adopted at an international level. A good example is the ISO 9000 set of standards regarding the quality management system, which is a common reference regardless of the industry in which a certain company activates. Just like quality control standards for other industrial processes such as manufacturing and customer service, information security standards demonstrate in a methodical and certifiable manner that an organization conforms to industry best practices and procedures. This article offers a review of the world’s most used information security standards.

  13. Business Standardization & Market Economy

    Institute of Scientific and Technical Information of China (English)

    Li Shiyuan

    2007-01-01

    The introduction of the market economy in China requires a renewed understanding of the theory and practice of business standardization. Built on the basic principles of standardization and the market economics, this paper seeks to define the role and status of standardization in the market economy, its aims and priorities. It then describes the deployment of standardization in market competition. Lastly, it explores into the possible transformations of concepts, functions and associated personnel of enterprise standardization in order to keep abreast of the evolving market economy.

  14. The control technology research device of a large torque standard%超大扭矩标准装置及其力偶控制技术研究

    Institute of Scientific and Technical Information of China (English)

    倪守忠; 蒋晓波; 尚贤平; 王鹏; 李海根

    2015-01-01

    This paper describes a large torque standard equipment, which by the servo motor, gear pump, and a swinging oil cylinder and the auxiliary balance cylinder torque drive, the measuring lever and four groups of special measuring force module precision torque measurement, the realization of the rapid precision torque control, and effectively reduce the bearing support reaction force caused by the measurement uncertainty.%本文介绍了一种超大扭矩标准装置, 该装置由伺服电机、 齿轮泵、 摆动油缸及辅助平衡油缸进行力矩驱动, 由测量杠杆及四组专用测力模块进行扭矩精密测量, 实现了扭矩快速精密控制, 并有效减小轴承支反力引起的测量不确定度.

  15. 咸酥花生加工原料与种子生产技术标准%Standard of the Processing Material and the Seed Production Technology of Salty Crisp Peanut

    Institute of Scientific and Technical Information of China (English)

    卢春生

    2014-01-01

    In order to promote the high-quality, efficient and sustainable development of salty crisp peanut industry, and to further enlarge and strengthen the regional advantaged industry, we studied the restriction factors of salty crisp peanut industry development and proposed the standard of processing varieties of salty crisp peanut, seed production technique, planting natural conditions and cultivation techniques, as to ensure the quality of the salty crisp peanut products and expand its market.%为促进咸酥花生产业向优质、高效、可持续发展,进一步做大做强区域优势产业,在分析咸酥花生产业发展制约因素的基础上,提出了咸酥花生加工型品种标准、种子生产技术、种植的自然条件和配套栽培技术,以保证咸酥花生产品质量,拓展市场。

  16. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels...

  17. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  18. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  19. Emerging Technologies

    OpenAIRE

    Salgar, S. M.

    2004-01-01

    Phenomenal advancements have taken place in the field of Information and communication technologies in the last decade. Spectacular and innovative changes are expected to take place in these fields in coming decade. Networking technologies are going through a sea change. This paper enumerates the likely networking technologies which are emerging, particularly WLANs. Most of the personal communication in the country will be through cellular/ mobile technologies, which are also covered in the p...

  20. Soulful Technologies

    DEFF Research Database (Denmark)

    Fausing, Bent

    2010-01-01

    or anthropomorphism is important for the branding of new technology. Technology is seen as creating a techno-transcendence towards a more qualified humanity which is in contact with fundamental human values like intuition, vision, and sensing; all the qualities that technology, industrialization, and rationalization...

  1. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  2. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  3. Assistive Technologies

    Science.gov (United States)

    Auat Cheein, Fernando A., Ed.

    2012-01-01

    This book offers the reader new achievements within the Assistive Technology field made by worldwide experts, covering aspects such as assistive technology focused on teaching and education, mobility, communication and social interactivity, among others. Each chapter included in this book covers one particular aspect of Assistive Technology that…

  4. Cases on Technology Integration in Mathematics Education

    Science.gov (United States)

    Polly, Drew, Ed.

    2015-01-01

    Common Core education standards establish a clear set of specific ideas and skills that all students should be able to comprehend at each grade level. In an effort to meet these standards, educators are turning to technology for improved learning outcomes. "Cases on Technology Integration in Mathematics Education" provides a compilation…

  5. 117 Standards Admitted in Civil Administration Standardization Plan

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The Ministry of Civil Administration has finalized its Standardization Plan 2007. According to this plan, the Ministry will see that 117 standards, including 8 compulsory national standards, 83 recommended national standards, and 26 professional standards, are prepared by June 2008.

  6. A Study on Requirements of BIM Technological Standards ——Focused on the Analysis of Finland BIM Guidelines%BIM技术标准研究——以BIM芬兰标准为例

    Institute of Scientific and Technical Information of China (English)

    杜书波

    2012-01-01

    为了实现设计平稳过渡到BIM的三维模型,首先要建立通用的标准化BIM环境.因此,许多使用BIM的国家已开始制定相关标准.新的BIM研究方法将在减少可能出现的误差和BIM造型分析错误表现上发挥重要的作用,鼓励BIM的广泛使用.从这个角度来看,本文的目的就是分析芬兰的BIM标准,明确适用的BIM模型,通过分析得出基于BIM模型的设计标准.%To make a smooth transition to the BIM-based 3D design, the guidelines for such matters should be established first and the BIM environment needs to be standardized as well. Accordingly, those countries; that plan to adopt BIM have been developing the related guidelines for that. Those pre-active approaches to BIM would play an important role in reducing the possible errors and the wrongful performance in BIM modeling as well as encouraging the broad usage of BIM. From this point of view, the purpose of this paper is to analyze the overseas trend focused on the Finland BIM guidelines, define the requirements applicable to BIM modeling and through these results figure out the aim of the BIM-based design.

  7. Comparative cost-effectiveness of robot-assisted and standard laparoscopic prostatectomy as alternatives to open radical prostatectomy for treatment of men with localised prostate cancer: a health technology assessment from the perspective of the UK National Health Service.

    Science.gov (United States)

    Close, Andrew; Robertson, Clare; Rushton, Stephen; Shirley, Mark; Vale, Luke; Ramsay, Craig; Pickard, Robert

    2013-09-01

    Robot-assisted laparoscopic prostatectomy is increasingly used compared with a standard laparoscopic technique, but it remains uncertain whether potential benefits offset higher costs. To determine the cost-effectiveness of robotic prostatectomy. We conducted a care pathway description and model-based cost-utility analysis. We studied men with localised prostate cancer able to undergo either robotic or laparoscopic prostatectomy for cure. We used data from a meta-analysis, other published literature, and costs from the UK National Health Service and commercial sources. Care received by men for 10 yr following radical prostatectomy was modelled. Clinical events, their effect on quality of life, and associated costs were synthesised assuming 200 procedures were performed annually. Over 10 yr, robotic prostatectomy was on average (95% confidence interval [CI]) £1412 (€1595) (£1304 [€1473] to £1516 [€1713]) more costly than laparoscopic prostatectomy but more effective with mean (95% CI) gain in quality-adjusted life-years (QALYs) of 0.08 (0.01-0.15). The incremental cost-effectiveness ratio (ICER) was £18 329 (€20 708) with an 80% probability that robotic prostatectomy was cost effective at a threshold of £30 000 (€33 894)/QALY. The ICER was sensitive to the throughput of cases and the relative positive margin rate favouring robotic prostatectomy. Higher costs of robotic prostatectomy may be offset by modest health gain resulting from lower risk of early harms and positive margin, provided >150 cases are performed each year. Considerable uncertainty persists in the absence of directly comparative randomised data. Copyright © 2013 European Association of Urology. Published by Elsevier B.V. All rights reserved.

  8. Study on the Technical Standard Order of Urban Green Service Resources Inventory Technology%《城市园林绿化资源调查技术规程》的研制

    Institute of Scientific and Technical Information of China (English)

    秦飞; 杨学民; 何树川; 刘景元; 关庆伟; 葛之葳; 高阔叶; 宦英姿

    2011-01-01

    The research of Urban Green Service Resources is not only a basic work of Urban Green Service industry management, but also an important complementarity and perfection of present urban construction statistics system. This procedure builds the concept of urban green service resources, stipulates the content and organizing measure of researching, definition of inquiry factors, standard of classification and researching measure, inquiry picture marks, prophase preparation work, outwork investigation, statistical calculation,investigate quality management, report of investigation result and so on. This procedure applied in the research of Urban Green Service Resources in Xuzhou in 2010 and got standout result.%城市园林绿化资源调查是城市园林绿化行业管理的一项基础工作,是对现行城建统计制度的重要补充和完善.文章通过研制规程,建立了城市园林绿化资源的概念,规定了调查的内容、组织方法,调查因子的定义、分类标准与调查方法,调查图斑区划,前期准备工作,外业调查,统计计算,调查质量管理,调查成果报告等技术要求,并应用于2010年开展的徐州市城市园林绿化资源调查中,取得了较好的成果.

  9. Scoring and Standard Setting with Standardized Patients.

    Science.gov (United States)

    Norcini, John J.; And Others

    1993-01-01

    The continuous method of scoring a performance test composed of standardized patients was compared with a derivative method that assigned each of the 131 examinees (medical residents) a dichotomous score, and use of Angoff's method with these scoring methods was studied. Both methods produce reasonable means and distributions of scores. (SLD)

  10. Interoperability of Standards for Robotics in CIME

    DEFF Research Database (Denmark)

    Kroszynski, Uri; Sørensen, Torben; Ludwig, Arnold

    1997-01-01

    Esprit Project 6457 "Interoperability of Standards for Robotics in CIME (InterRob)" belongs to the Subprogramme "Integration in Manufacturing" of Esprit, the European Specific Programme for Research and Development in Information Technology supported by the European Commision.The first main goal...... of InterRob was to close the information chain between product design, simulation, programming, and robot control by developing standardized interfaces and their software implementation for standards STEP (International Standard for the Exchange of Product model data, ISO 10303) and IRL (Industrial Robot...... Language, DIN 66312). This is a continuation of the previous Esprit projects CAD*I and NIRO, which developed substantial basics of STEP.The InterRob approach is based on standardized models for product geometry, kinematics, robotics, dynamics and control, hence on a coherent neutral information model...

  11. Interoperability of Standards for Robotics in CIME

    DEFF Research Database (Denmark)

    Kroszynski, Uri; Sørensen, Torben; Ludwig, Arnold

    1997-01-01

    Esprit Project 6457 "Interoperability of Standards for Robotics in CIME (InterRob)" belongs to the Subprogramme "Integration in Manufacturing" of Esprit, the European Specific Programme for Research and Development in Information Technology supported by the European Commision.The first main goal...... of InterRob was to close the information chain between product design, simulation, programming, and robot control by developing standardized interfaces and their software implementation for standards STEP (International Standard for the Exchange of Product model data, ISO 10303) and IRL (Industrial Robot...... Language, DIN 66312). This is a continuation of the previous Esprit projects CAD*I and NIRO, which developed substantial basics of STEP.The InterRob approach is based on standardized models for product geometry, kinematics, robotics, dynamics and control, hence on a coherent neutral information model...

  12. Insulin pump risks and benefits: a clinical appraisal of pump safety standards, adverse event reporting and research needs. A joint statement of the European Association for the Study of Diabetes and the American Diabetes Association Diabetes Technology Working Group.

    Science.gov (United States)

    Heinemann, Lutz; Fleming, G Alexander; Petrie, John R; Holl, Reinhard W; Bergenstal, Richard M; Peters, Anne L

    2015-05-01

    -world setting; such data could provide vital information to help healthcare teams to educate and support users, and thereby prevent AEs. As well as requiring more from the manufacturing companies, we call for public funding of more research addressing clinically important questions in relation to pump therapy: both observational studies and clinical trials. At present there are significant differences in the regulatory systems between the USA and European Union at both pre- and post-marketing stages; improvements in the European system are more urgently required. This statement concludes with a series of recommended specific actions for 'meknovigilance' (i.e. a standardised safety approach to technology) which could be implemented to address the shortcomings we highlight.

  13. Section 508 Standards

    Science.gov (United States)

    Guidelines, design tips, and tools for ensuring that all Information and Communications Technology; including websites, software, hardware, multimedia, and telecommunication; is accessible to disabled users.

  14. ICT Competency Standards for Teachers: Policy Framework

    Science.gov (United States)

    United Nations Educational, Scientific and Cultural Organization (UNESCO), 2008

    2008-01-01

    The Untied Nations Educational, Scientific, and Cultural Organization (UNESCO) Information and Communication Technology (ICT) Competency Standards for Teachers (ICT-CST) project aims to improve teachers' practice in all areas of their work, combining ICT skills with innovations in pedagogy, curriculum, and school organization. It is also aimed at…

  15. Science and technology

    CERN Document Server

    Chorafas, Dimitris N

    2014-01-01

    The aim of this book is to explore science and technology from the viewpoint of creating new knowledge, as opposed to the reinterpretation of existing knowledge in ever greater but uncertain detail. Scientists and technologists make progress by distinguishing between what they regard as meaningful and what they consider as secondary or unimportant. The meaningful is dynamic; typically, the less important is static. Science and technology have made a major contribution to the culture and to the standard of living of our society. From antiquity to the present day, the most distinguished scientis

  16. Sensemaking technologies

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research scope: The scope of the project is to study technological implementation processes by using Weick's sensemaking concept (Weick, 1995). The purpose of using a social constructivist approach to investigate technological implementation processes is to find out how new technologies transform......, Orlikowski 2000). Viewing the use of technology as a process of enactment opens up for investigating the social processes of interpreting new technology into the organisation (Orlikowski 2000). The scope of the PhD project will therefore be to gain a deeper understanding of how the enactment of new...... & Brass, 1990; Kling 1991; Orlikowski 2000). It also demonstrates that technology is a flexible variable adapted to the organisation's needs, culture, climate and management philosophy, thus leading to different uses and outcomes of the same technology in different organisations (Barley 1986; 1990...

  17. Technology in the Foreign Language Classroom

    Directory of Open Access Journals (Sweden)

    Karen Wolz Verkler

    2004-06-01

    Full Text Available Although national standards such as the Standards for Foreign Language Learning in the 21st Century (National Standards in Foreign Language Education Project, 1999and the National Educational Technology Standards (ISTE, 2000 advocate the need for enhanced curricular integration of technology, the reality is that colleges of education nationally are inconsistent in the technology requirements demanded of its preservice teachers. In addition, current foreign language pedagogy supports the use of technology to increase the opportunities for communicative practice in three contexts: interpersonal, interpretive, and presentational modes. To prepare its majors for the increasingly technologically complex demands of the field of education, the foreign language education program at a large, metropolitan Central Florida university developed and implemented a technology course that uniquely addressed concerns of foreign language educators. In this article, the author details the course objectives, content, activities, and assignments.

  18. Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

    Science.gov (United States)

    Conroy, Mike; Gill, Paul; Hill, Bradley; Ibach, Brandon; Jones, Corey; Ungar, David; Barch, Jeffrey; Ingalls, John; Jacoby, Joseph; Manning, Josh; Bengtsson, Kjell; Falls, Mark; Kent, Peter; Heath, Shaun; Kennedy, Steven

    2014-01-01

    The TDI project (TDI) investigates trending technical data standards for applicability to NASA vehicles, space stations, payloads, facilities, and equipment. TDI tested COTS software compatible with a certain suite of related industry standards for capabilities of individual benefits and interoperability. These standards not only esnable Information Technology (IT) efficiencies, but also address efficient structures and standard content for business processes. We used source data from generic industry samples as well as NASA and European Space Agency (ESA) data from space systems.

  19. Appropriate Technology as Indian Technology.

    Science.gov (United States)

    Barry, Tom

    1979-01-01

    Describes the mounting enthusiasm of Indian communities for appropriate technology as an inexpensive means of providing much needed energy and job opportunities. Describes the development of several appropriate technology projects, and the goals and activities of groups involved in utilizing low scale solar technology for economic development on…

  20. International hearing protector standardization

    DEFF Research Database (Denmark)

    Poulsen, Torben

    2002-01-01

    Hearing protectors shall fulfill some minimum requirements to their performance. As hearing protector manufacturers sell the products all over the world, the testing and certification of hearing protectors has become an international issue. The ISO working group WG17 under the headlines Acoustics......, Noise, produce hearing protector standards to be used at an international level. The presentation will cover the ongoing work in WG17, including the revision of existing standards (ISO 4869-1, ISO 4869-3), upcoming new standards (ISO 4869-7) and the plans and status for future standards (performance...... in impulse noise, protectors with active noise reduction). Furthermore, an overview of the present European standards (CEN) and the relation to American and Australian/New Zealand standards will be discussed....