WorldWideScience

Sample records for technology services division

  1. Rehabilitation technology services and employment outcomes among consumers using division of rehabilitation services.

    Science.gov (United States)

    Sprong, Matthew Evan; Dallas, Bryan; Paul, Erina; Xia, Michelle

    2018-05-03

    The primary goal of the study was to evaluate how the use of rehabilitation technology impacted closure status for consumers receiving services in fiscal year (FY) 2014. Rehabilitation Service Administration (RSA-911) Case Service Report FY 2014 archival dataset was obtained from the U.S. Department of Education (2014) and secondary analyses was performed for this study. RSA-911 archival data is updated on an annual basis and consists of all state-federal rehabilitation consumers who were served in the specific fiscal year. The dataset contains information related to each consumer's demographic information (e.g. age, gender, race) and other supplemental information (e.g. weekly earnings at closure, cause of disability, services provided). A multiple logistic regression analysis was utilized and revealed that white consumers receiving rehabilitation technology (RT) services have significantly higher closure rate than consumers of other races, RT services differ by the employment status at application, RT services differ by the type of disability, educational level at application for people receiving RT services did predict closure status (i.e. exiting with an employment outcome), IEP status did not predict closure status, weekly earnings at application did predict closure status and the interaction effect between IEP and RT services is statistically significant. The odds ratio (ORs) were presented at the 95% confidence interval (CI). Vocational rehabilitation counselors needs training to correctly identify appropriate RT services for consumers, so that the likelihood of exiting with an employment outcome is obtained. Implications for Rehabilitation RT services significantly improved their chances of successful employment compared to those who did not receive RT services. Education at closure would also have some significant impact on employment outcomes. Training in Assistive Technology (AT) for Vocational Rehabilitation counselors will assist in the proper

  2. 75 FR 60141 - International Business Machines (IBM), Global Technology Services Delivery Division, Including On...

    Science.gov (United States)

    2010-09-29

    ... 25, 2010, applicable to workers of International Business Machines (IBM), Global Technology Services... hereby issued as follows: All workers of International Business Machines (IBM), Global Technology... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,164] International Business...

  3. Division of Information Technology - Overview

    International Nuclear Information System (INIS)

    Szlachciak, J.

    2007-01-01

    I have a great pleasure to introduce the youngest division in our Institute, namely the Division of Information Technology. The division was created in 2005, but this is the first time when it reports its activities. The main purpose of creation was a better management of al IT activities in different departments, lowering IT costs and increase security over all computer systems used be the Institute. Although we have started with small human resources, we have received a big support from other departments. Special thanks go to the Department of Detectors and Nuclear Electronics. Our division handles many service-oriented activities. In daily work we answer many IT-related questions and deliver our help in order to solve hardware and software problems. The style of our work can be described as a result-oriented one. Here is the list of our biggest achievements: · construction of the server room; · implementation of two electronic bank systems; · development of the dynamic hardware and software inventory system; · development of the Scientific Activity Database. (author)

  4. Chemical Technology Division annual technical report 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division`s activities during 1997 are presented.

  5. Chemical Technology Division annual technical report 1997

    International Nuclear Information System (INIS)

    1998-06-01

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1997 are presented

  6. 1998 Chemical Technology Division Annual Technical Report.

    Energy Technology Data Exchange (ETDEWEB)

    Ackerman, J.P.; Einziger, R.E.; Gay, E.C.; Green, D.W.; Miller, J.F.

    1999-08-06

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented.

  7. Division of Information Technology - Overview

    International Nuclear Information System (INIS)

    Szlachciak, J.

    2008-01-01

    Full text: The Division of Information Technology continued its service-oriented activities in 2007. Our main duty was a day-to-day support to all units in the Institute in IT related matters. One of our tasks was the acquiring, configuration and delivery of new computer equipment to our users. We prepared technical specification for several biddings and we verified bids received from the point of view of correctness. Due to financial support from our government, we purchased about one-fourth of our existing computer equipment. This hardware has partially replaced the old units and partially supported our new staff. Implemented at the end of 2006 the Scientific Activity Database has continued its operation and has been extended by several useful reports and fields containing important information. We started preliminary activities related to implementation of video conferencing services in our Institute. Apart of taking part in seminars and consulting several companies, we have managed to transmit a few scientific seminars from Warsaw to our department in Lodz. (author)

  8. Chemical Technology Division annual technical report, 2001

    International Nuclear Information System (INIS)

    Lewis, D.; Gay, E. C.; Miller, J. C.; Boparai, A. S.

    2002-01-01

    The Chemical Technology Division (CMT) is one of eight engineering research divisions within Argonne National Laboratory, one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base by developing innovative technology and transferring it to industry. CMT is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced electrochemical power sources, and management of both high- and low-level nuclear wastes. Although this work is often indistinguishable from basic research, our efforts are directed toward the practical devices and processes that are covered by Argonne's mission. Additionally, the Division operates the Analytical Chemistry Laboratory and Environment, Safety, and Health Analytical Chemistry services, which provide a broad range of analytical services to Argonne and other organizations. The Division is multidisciplinary. Its people have formal training as ceramists; physicists; material scientists; electrical, mechanical, chemical, and nuclear engineers; and chemists. They have experience working in academia; urban planning; and the petroleum, aluminum, and automotive industries. Their skills include catalysis, ceramics, electrochemistry, metallurgy, nuclear magnetic resonance spectroscopy, and petroleum refining, as well as the development of nuclear waste forms, batteries, and high-temperature superconductors

  9. Chemical Technology Division Annual Report 2000

    International Nuclear Information System (INIS)

    Lewis, D.; Gay, E. C.; Miller, J. F.; Einziger, R. E.; Green, D. W.

    2001-01-01

    The Chemical Technology Division (CMT) is one of eight engineering research divisions within Argonne National Laboratory (ANL), one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base through developing industrial technology and transferring that technology to industry. The Chemical Technology Division is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced power sources, and management of both high- and low-level nuclear wastes. Although this work is often indistinguishable from basic research, our efforts are directed toward the practical devices and processes that are covered by ANL's mission. Additionally, the Division operates the Analytical Chemistry Laboratory, which provides a broad range of analytical services to ANL and other organizations. The Division is multi-disciplinary. Its people have formal training as ceramists; physicists; material scientists; electrical, mechanical, chemical, and nuclear engineers; and chemists. They have experience working in academia, urban planning, and the petroleum, aluminum, and automotive industries. Their skills include catalysis, ceramics, electrochemistry, metallurgy, nuclear magnetic resonance spectroscopy, and petroleum refining, as well as the development of nuclear waste forms, batteries, and high-temperature superconductors. In this annual report we present an overview of the technical programs together with representative highlights. The report is not intended to be comprehensive or encyclopedic, but to serve as an indication of the condition

  10. Division of Information Technology - Overview

    International Nuclear Information System (INIS)

    Szlachciak, J.

    2010-01-01

    Full text: The Division of Information Technology continued its service-oriented activities in 2009. Our main duty was day-to-day support to all units in the Institute in IT related matters. One of our tasks was the acquiring, configuration and delivery of new computer equipment to our users. We automated the standard software installation task and decreased the delivery time for new and fully reconfigured computers to end users. We prepared the technical specifications for several bid and we verified thai the received bids complied with the specification. In addition to regular purchasing of computer equipment we supported the special software -related needs of EU projects. We purchased new licenses for: Computer Simulation Technology Studio Suite, Pulsar Physics General Particle Tracerm. Altium Designer. Autodesk Inventor. Autodesk AutoCAD Electrical, Altera Quartus II. Lahey/Fujitsu Fortran Professional. Code Gear Delphi, Steema Software TeeChart Pro, ANSYS Academic Research, Math Works Matlab, Keil PK51 Professional Developer's Kit, Corel Corporation CorelDraw Graphics Suite, Abbyy FineReader Professional, Adobe Acrobat Professional. We also renewed and increased the number of licenses for Microsoft and GFI products. We implemented a full high definition video conferencing system based on equipment from Lifesize. One-video conferencing terminal is placed in Swierk. another, enabling 4-way conferences, is located in Warsaw. This equipment is mainly used for teleconferences between our Institute and our partners in DESY and CERN. By the implementation of such a system we significantly improved the exchange of information and saved on travel costs. In addition the rooms housing the video conferencing systems were equipped with professional data projectors. We continued the modernization of the Local Area Network infrastructure. The first main achievement was a full replacement of cables and active network devices in the building where the Departments of Plasma

  11. Chemical Technology Division, Annual technical report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  12. Chemical Technology Division annual technical report, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1994 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion; (3) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from waste streams, concentrating radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium for medical applications; (6) electrometallurgical treatment of the many different types of spent nuclear fuel in storage at Department of Energy sites; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, and impurities in scrap copper and steel; and the geochemical processes involved in mineral/fluid interfaces and water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  13. Chemical Technology Division annual technical report, 2001

    International Nuclear Information System (INIS)

    Lewis, D.; Gay, E. C.; Miller, J. C.; Boparai, A. S.

    2002-01-01

    The Chemical Technology Division (CMT) is one of eight engineering research divisions within Argonne National Laboratory, one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base by developing innovative technology and transferring it to industry. CMT is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced electrochemical power sources, and management of both high- and low-level nuclear wastes. Although this work is often indistinguishable from basic research, our efforts are directed toward the practical devices and processes that are covered by Argonne's mission. Additionally, the Division operates the Analytical Chemistry Laboratory and Environment, Safety, and Health Analytical Chemistry services, which provide a broad range of analytical services to Argonne and other organizations. The Division is multidisciplinary. Its people have formal training as ceramists; physicists; material scientists; electrical, mechanical, chemical, and nuclear engineers; and chemists. They have experience working in academia; urban planning; and the petroleum, aluminum, and automotive industries. Their skills include catalysis, ceramics, electrochemistry, metallurgy, nuclear magnetic resonance spectroscopy, and petroleum refining, as well as the development of nuclear waste forms, batteries, and high-temperature super-conductors. The Division's wide-ranging expertise finds ready application in solving energy and environmental problems. Division personnel are frequently called on by governmental and industrial

  14. Chemical Technology Division annual technical report, 1994

    International Nuclear Information System (INIS)

    1995-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1994 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion; (3) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from waste streams, concentrating radioactive waste streams with advanced evaporator technology, and producing 99 Mo from low-enriched uranium for medical applications; (6) electrometallurgical treatment of the many different types of spent nuclear fuel in storage at Department of Energy sites; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, and impurities in scrap copper and steel; and the geochemical processes involved in mineral/fluid interfaces and water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL)

  15. Chemical Technology Division, Annual technical report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  16. Chemical Technology Division, Annual technical report, 1991

    International Nuclear Information System (INIS)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL)

  17. CSIR Division of Mining Technology annual review 1993/94

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The Division of Mining Technology of the CSIR (Council for Scientific and Industrial Research) works in partnership with the mining industry to solve problems threatening the health, safety and well-being of the workforce, and the productivity of mining operations through the development and implementation of knowledge and technology. The annual review describes the Division's research projects in the following field: rock engineering (for gold, platinum and coal mining); mining environment; occupational hygiene; surface environment; and mining equipment and systems (systems and equipment, orebody information, coal mining and causes of accidents). Details are also given of the Division's publications, research and consultancy services and information centre.

  18. APDAS : Applied Physics Division analytical services

    International Nuclear Information System (INIS)

    1989-01-01

    Applied Physics Division Analytical Services (APDAS) is a new initiative within the Australian Nuclear Science and Technology Organization. Because of its background and achievements in high-tech research, APDAS can provide solutions to many of the problems that arise in Australian industries. One of the facilities available to APDAS is a positive ion particle accelerator. This enables any positive ion in a gaseous medium to be accelerated to energies ranging from a few hundred thousand to three million electron volts for single charge states. Ion beams can be stead-state or pulsed with pulse durations as low as three nanoseconds. Target preparation and fully automated data recording are also available. Accelerator-based services, presently available are outlined in 7 separate leaflets, briefly describing the techniques, particular applications, typical costs and availability. These include : surface analysis and depth profiling using ion beams; standard neutron irradiation facility (SNIF); soil-moisture determination; hydrogen analysis neutron radiography; adsorbed dose calibration standards; gas phase enrichment monitor; 18 O analysis. 26 figs

  19. Alaska Child Support Services Division

    Science.gov (United States)

    Payments Online! The CSSD Business Services Portal offers employers the convenience of paying child support ://my.Alaska.gov. Reporting online will save you time and money! If your business already has a myAlaska account Skip to content State of Alaska myAlaska My Government Resident Business in Alaska Visiting Alaska

  20. Energy Technology Division research summary 2004

    International Nuclear Information System (INIS)

    Poeppel, R. B.; Shack, W. J.

    2004-01-01

    The Energy Technology (ET) Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy (DOE). The Division's capabilities are generally applied to technical issues associated with energy systems, biomedical engineering, transportation, and homeland security. Research related to the operational safety of commercial light water nuclear reactors (LWRs) for the US Nuclear Regulatory Commission (NRC) remains another significant area of interest for the Division. The pie chart below summarizes the ET sources of funding for FY 2004

  1. Chemical Technology Division annual technical report, 1990

    International Nuclear Information System (INIS)

    1991-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1990 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for coal- fired magnetohydrodynamics and fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for a high-level waste repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, concentrating plutonium solids in pyrochemical residues by aqueous biphase extraction, and treating natural and process waters contaminated by volatile organic compounds; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the scientific and engineering programs at Argonne National Laboratory (ANL). 66 refs., 69 figs., 6 tabs

  2. Chemical Technology Division annual technical report, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1990 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for coal- fired magnetohydrodynamics and fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for a high-level waste repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, concentrating plutonium solids in pyrochemical residues by aqueous biphase extraction, and treating natural and process waters contaminated by volatile organic compounds; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the scientific and engineering programs at Argonne National Laboratory (ANL). 66 refs., 69 figs., 6 tabs.

  3. Energy Technology Division research summary 2001

    International Nuclear Information System (INIS)

    2001-01-01

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the U.S. Department of Energy. As shown on the preceding page, the Division is organized into eight sections, four with concentrations in the materials area and four in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officer, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. This Overview highlights some major ET research areas. Research related to the operational safety of commercial light water nuclear reactors (LWRs) for the U.S. Nuclear Regulatory Commission (NRC) remains a significant area of interest for the Division. We currently have programs on environmentally assisted cracking, steam generator integrity, and the integrity of high-burnup fuel during loss-of-coolant accidents. The bulk of the NRC research work is carried out by three ET sections: Corrosion and Mechanics of Materials; Irradiation Performance; and Sensors, Instrumentation, and Nondestructive Evaluation

  4. Energy Technology Division research summary - 1999.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-31

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization, or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book.

  5. 15 CFR 950.8 - Satellite Data Services Division (SDSD).

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Satellite Data Services Division (SDSD... THE ENVIRONMENTAL DATA SERVICE ENVIRONMENTAL DATA AND INFORMATION § 950.8 Satellite Data Services Division (SDSD). The Satellite Data Services Division of the EDIS National Climatic Center provides...

  6. Chemical Technology Division annual technical report, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1993-06-01

    In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous waste, mixed hazardous/radioactive waste, and municipal solid waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, treating water contaminated with volatile organics, and concentrating radioactive waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (EFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials (corium; Fe-U-Zr, tritium in LiAlO{sub 2} in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel` ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, and molecular sieve structures; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  7. Chemical Technology Division annual technical report, 1992

    International Nuclear Information System (INIS)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1993-06-01

    In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous waste, mixed hazardous/radioactive waste, and municipal solid waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, treating water contaminated with volatile organics, and concentrating radioactive waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (EFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials (corium; Fe-U-Zr, tritium in LiAlO 2 in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel' ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, and molecular sieve structures; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL)

  8. Chemical Technology Division annual technical report, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    CMT is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. It conducts R&D in 3 general areas: development of advanced power sources for stationary and transportation applications and for consumer electronics, management of high-level and low-level nuclear wastes and hazardous wastes, and electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, materials chemistry of electrified interfaces and molecular sieves, and the theory of materials properties. It also operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at ANL and other organizations. Technical highlights of the Division`s activities during 1996 are presented.

  9. Manager, Technology Services | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Manager, Technology Services (TS) manages IT operations and technical support. ... while ensuring high levels of customer service quality and availability. .... Represents the division and Centre during internal and external meetings, ...

  10. Energy Technology Division research summary 1997

    International Nuclear Information System (INIS)

    1997-01-01

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book. This Overview highlights some major trends. Research related to the operational safety of commercial light water nuclear

  11. Energy Technology Division research summary 1997.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-21

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book. This Overview highlights some major trends. Research related to the operational safety of commercial light water

  12. Chemical Technology Division. Annual technical report, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Laidler, J.J.; Myles, K.M.; Green, D.W.; McPheeters, C.C.

    1996-06-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1995 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (3) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (4) processes for separating and recovering selected elements from waste streams, concentrating low-level radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium; (5) electrometallurgical treatment of different types of spent nuclear fuel in storage at Department of Energy sites; and (6) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems.

  13. Chemical Technology Division annual technical report 1989

    International Nuclear Information System (INIS)

    1990-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1989 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including high-performance batteries (mainly lithium/iron sulfide and sodium/metal chloride), aqueous batteries (lead-acid and nickel/iron), and advanced fuel cells with molten carbonate and solid oxide electrolytes: (2) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing 99 Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor (the Integral Fast Reactor), and waste management; and (5) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be administratively responsible for and the major user of the Analytical Chemistry Laboratory at Argonne National Laboratory (ANL)

  14. Service activities of chemical analysis division

    International Nuclear Information System (INIS)

    Eom, Tae Yoon; Suh, Moo Yul; Park, Kyoung Kyun; Jung, Ki Suk; Joe, Kih Soo; Jee, Kwang Yong; Jung, Woo Sik; Sohn, Se Chul; Yeo, In Heong; Han, Sun Ho

    1988-12-01

    Progress of the Division during the year of 1988 was described on the service activities for various R and D projects carrying out in the Institute, for the fuel fabrication and conversion plant, and for the post-irradiation examination facility. Relevant analytical methodologies developed for the chemical analysis of an irradiated fuel, safeguards chemical analysis, and pool water monitoring were included such as chromatographic separation of lanthanides, polarographic determination of dissolved oxygen in water, and automation on potentiometric titration of uranium. Some of the laboratory manuals revised were also included in this progress report. (Author)

  15. Chemical Technology Division annual technical report, 1985

    International Nuclear Information System (INIS)

    1986-04-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1985 are presented. In this period, CMT conducted research and development in areas that include the following: (1) advanced batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) advanced fuel cells with molten carbonate or solid oxide electrolytes; (3) corrosion-protective coatings for high-strength steel; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methodologies for recovery of energy from municipal waste; (6) nuclear technology related to waste management, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and proof of breeding in a light water breeder reactor; and (7) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL

  16. Chemical Technology Division annual technical report, 1996

    International Nuclear Information System (INIS)

    1997-06-01

    CMT is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. It conducts R ampersand D in 3 general areas: development of advanced power sources for stationary and transportation applications and for consumer electronics, management of high-level and low-level nuclear wastes and hazardous wastes, and electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, materials chemistry of electrified interfaces and molecular sieves, and the theory of materials properties. It also operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at ANL and other organizations. Technical highlights of the Division's activities during 1996 are presented

  17. Chemical Technology Division annual technical report 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1989 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including high-performance batteries (mainly lithium/iron sulfide and sodium/metal chloride), aqueous batteries (lead-acid and nickel/iron), and advanced fuel cells with molten carbonate and solid oxide electrolytes: (2) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing {sup 99}Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor (the Integral Fast Reactor), and waste management; and (5) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be administratively responsible for and the major user of the Analytical Chemistry Laboratory at Argonne National Laboratory (ANL).

  18. Chemical technology division: Annual technical report 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1987 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries--mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for the electromagnetic continuous casting of steel sheet and for the purification of ferrous scrap; (6) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (7) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; the thermochemistry of various minerals; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 54 figs., 9 tabs.

  19. Chemical Technology Division annual technical report, 1986

    Energy Technology Data Exchange (ETDEWEB)

    1987-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1986 are presented. In this period, CMT conducted research and development in areas that include the following: (1) high-performance batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants, the technology for fluidized-bed combustion, and a novel concept for CO/sub 2/ recovery from fossil fuel combustion; (5) methods for recovery of energy from municipal waste; (6) methods for the electromagnetic continuous casting of steel sheet; (7) techniques for treatment of hazardous waste such as reactive metals and trichloroethylenes; (8) nuclear technology related to waste management, a process for separating and recovering transuranic elements from nuclear waste, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (9) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 127 refs., 71 figs., 8 tabs.

  20. Chemical technology division: Annual technical report 1987

    International Nuclear Information System (INIS)

    1988-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1987 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries--mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for the electromagnetic continuous casting of steel sheet and for the purification of ferrous scrap; (6) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (7) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; the thermochemistry of various minerals; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 54 figs., 9 tabs

  1. Chemical Technology Division annual technical report, 1988

    International Nuclear Information System (INIS)

    1989-05-01

    Highlights of the Chemical Technology (CMT) Divisions's activities during 1988 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries (mainly lithium-alloy/metal sulfide, sodium/metal chloride, and sodium/sulfur); (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for recovery of energy from municipal waste and techniques for treatment of hazardous chemical water; (6) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing /sup 99/Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (7) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 53 figs., 16 tabs

  2. Chemical Technology Division annual technical report, 1986

    International Nuclear Information System (INIS)

    1987-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1986 are presented. In this period, CMT conducted research and development in areas that include the following: (1) high-performance batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants, the technology for fluidized-bed combustion, and a novel concept for CO 2 recovery from fossil fuel combustion; (5) methods for recovery of energy from municipal waste; (6) methods for the electromagnetic continuous casting of steel sheet; (7) techniques for treatment of hazardous waste such as reactive metals and trichloroethylenes; (8) nuclear technology related to waste management, a process for separating and recovering transuranic elements from nuclear waste, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (9) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 127 refs., 71 figs., 8 tabs

  3. Chemical Technology Division. Annual technical report, 1995

    International Nuclear Information System (INIS)

    Laidler, J.J.; Myles, K.M.; Green, D.W.; McPheeters, C.C.

    1996-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1995 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (3) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (4) processes for separating and recovering selected elements from waste streams, concentrating low-level radioactive waste streams with advanced evaporator technology, and producing 99 Mo from low-enriched uranium; (5) electrometallurgical treatment of different types of spent nuclear fuel in storage at Department of Energy sites; and (6) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems

  4. Chemical Technology Division annual technical report, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1994-04-01

    Chemical Technology (CMT) Division this period, conducted research and development in the following areas: advanced batteries and fuel cells; fluidized-bed combustion and coal-fired magnetohydrodynamics; treatment of hazardous waste and mixed hazardous/radioactive waste; reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; separating and recovering transuranic elements, concentrating radioactive waste streams with advanced evaporators, and producing {sup 99}Mo from low-enriched uranium; recovering actinide from IFR core and blanket fuel in removing fission products from recycled fuel, and disposing removal of actinides in spent fuel from commercial water-cooled nuclear reactors; and physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, thin-film diamond surfaces, effluents from wood combustion, and molten silicates; and the geochemical processes involved in water-rock interactions. The Analytical Chemistry Laboratory in CMT also provides a broad range of analytical chemistry support.

  5. Chemical Technology Division annual technical report, 1993

    International Nuclear Information System (INIS)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1994-04-01

    Chemical Technology (CMT) Division this period, conducted research and development in the following areas: advanced batteries and fuel cells; fluidized-bed combustion and coal-fired magnetohydrodynamics; treatment of hazardous waste and mixed hazardous/radioactive waste; reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; separating and recovering transuranic elements, concentrating radioactive waste streams with advanced evaporators, and producing 99 Mo from low-enriched uranium; recovering actinide from IFR core and blanket fuel in removing fission products from recycled fuel, and disposing removal of actinides in spent fuel from commercial water-cooled nuclear reactors; and physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, thin-film diamond surfaces, effluents from wood combustion, and molten silicates; and the geochemical processes involved in water-rock interactions. The Analytical Chemistry Laboratory in CMT also provides a broad range of analytical chemistry support

  6. Chemical Technology Division annual technical report 1984

    International Nuclear Information System (INIS)

    1985-02-01

    In this period, CMT conducted research and development in the following areas: (1) advanced batteries - mainly lithium alloy/metal sulfide and sodium/sulfur for electric vehicles; (2) aqueous batteries - mainly improved lead-acid and nickel/iron for electric vehicles; (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamic plants and the technology for pressurized fluidized-bed combustors; (5) methodologies for recovery of energy from municipal waste; (6) solid and liquid desiccants that allow moisture to be removed with a minium of energy; (7) nuclear technology related to waste management, proof of breeding for a light water reactor, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (8) physical chemistry of selected materials in environments simulating those of fission, fusion, and other energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting abundant raw materials to desired products; materials chemistry of liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; atmospheric chemistry, most notably SO 2 oxidation mechanisms; and the thermochemistry of zeolites, related silicates, and inorganic compounds

  7. Radiation Protection Services Division: progress report for 1992-1993

    International Nuclear Information System (INIS)

    Massand, O.P.; Murthy, B.K.S.

    1994-01-01

    This report describes the work of the Radiation Protection Services Division during 1993, for implementation of radiation safety in all institutions in India using radiation sources in medical, industrial and research applications. It gives information about personnel monitoring using photographic film and TLD badges, neutron monitoring badges, advisory and licensing services, regulation, transport of radioactive materials and periodic protection survey. About 33 publications by the staff of the Division are also listed. (author). 4 tabs

  8. Laser and Plasma Technology Division, Annual Reports 1996 and 1997

    International Nuclear Information System (INIS)

    Venkatramani, N.

    1999-04-01

    This report describes the activity of the Laser and Plasma Technology Division of Bhabha Atomic Research Centre during the two year period 1996- 1997. This division is engaged in the research and development of high power beams mainly laser, plasma and electron beams. Laser and Plasma Technology Division has strived to establish indigenous capability to cater to the requirements of Department of Atomic Energy. This involves development and technology readiness study of laser, plasma and electron beam devices. In addition, studies are also carried out on related physical phenomenon with a view to gain better understanding of the devices. This report has been compiled from individual reports of various groups/sections working in the division. A list of publications by the several members of the division is also included. (author)

  9. Energy Technology Division research summary -- 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    Research funded primarily by the NRC is directed toward assessing the roles of cyclic fatigue, intergranular stress corrosion cracking, and irradiation-assisted stress corrosion cracking on failures in light water reactor (LWR) piping systems, pressure vessels, and various core components. In support of the fast reactor program, the Division has responsibility for fuel-performance modeling and irradiation testing. The Division has major responsibilities in several design areas of the proposed International Thermonuclear Experimental Reactor (ITER). The Division supports the DOE in ensuring safe shipment of nuclear materials by providing extensive review of the Safety Analysis Reports for Packaging (SARPs). Finally, in the nuclear area they are investigating the safe disposal of spent fuel and waste. In work funded by DOE`s Energy Efficiency and Renewable Energy, the high-temperature superconductivity program continues to be a major focal point for industrial interactions. Coatings and lubricants developed in the division`s Tribology Section are intended for use in transportation systems of the future. Continuous fiber ceramic composites are being developed for high-performance heat engines. Nondestructive testing techniques are being developed to evaluate fiber distribution and to detect flaws. A wide variety of coatings for corrosion protection of metal alloys are being studied. These can increase lifetimes significant in a wide variety of coal combustion and gasification environments.

  10. Division of Agro technology and Biosciences: Past, Present and Future

    International Nuclear Information System (INIS)

    Khairuddin Abdul Rahim

    2012-01-01

    In presenter speech, he outlined several topics regarding development of Agro technology and Biosciences Division from 31 years ago. This division started with Unit Sains Hidupan Liar under PUSPATI in 1981 and change their names to Program Isotop dan Sinaran dalam Biologi dan Pertanian under Nuclear Technology Unit (UTN) (1983). In 1990 their premise change to MINT-Tech Park. This program responsible for conducting research in agro technology using nuclear technology. Several achievements achieved by this division since established. They also succeed in mutating banana namely Novaria banana (1994), Tongkat Ali rice (1990), ground nut (2003), orchids, organic fertilizer and foliage in 2000. The vision of this division are to promote and enhance innovation and applications in nuclear technology to achieve security in food productivity, safety and quality and ecological awareness for economics competitiveness and vibrancy in agrobioindustry and community development. (author)

  11. Industry Service - Technology Centre

    DEFF Research Database (Denmark)

    Hollensen, Svend; Grünbaum, Niels Nolsøe

    2011-01-01

    The chapter describes and explains the development of an Industry Service Technology (IS-T) portal solution at Danfoss for testing of products, including booking system for standardised 'service packages' in order to reduce waiting time....

  12. 1998 Chemical Technology Division Annual Technical Report. Applying chemical innovation to environmental problems

    International Nuclear Information System (INIS)

    Ackerman, J.P.; Einziger, R.E.; Gay, E.C.; Green, D.W.; Miller, J.F.

    1999-01-01

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented

  13. Energy Technology Division research summary -- 1994

    International Nuclear Information System (INIS)

    1994-09-01

    Research funded primarily by the NRC is directed toward assessing the roles of cyclic fatigue, intergranular stress corrosion cracking, and irradiation-assisted stress corrosion cracking on failures in light water reactor (LWR) piping systems, pressure vessels, and various core components. In support of the fast reactor program, the Division has responsibility for fuel-performance modeling and irradiation testing. The Division has major responsibilities in several design areas of the proposed International Thermonuclear Experimental Reactor (ITER). The Division supports the DOE in ensuring safe shipment of nuclear materials by providing extensive review of the Safety Analysis Reports for Packaging (SARPs). Finally, in the nuclear area they are investigating the safe disposal of spent fuel and waste. In work funded by DOE's Energy Efficiency and Renewable Energy, the high-temperature superconductivity program continues to be a major focal point for industrial interactions. Coatings and lubricants developed in the division's Tribology Section are intended for use in transportation systems of the future. Continuous fiber ceramic composites are being developed for high-performance heat engines. Nondestructive testing techniques are being developed to evaluate fiber distribution and to detect flaws. A wide variety of coatings for corrosion protection of metal alloys are being studied. These can increase lifetimes significant in a wide variety of coal combustion and gasification environments

  14. On-chip mode division multiplexing technologies

    DEFF Research Database (Denmark)

    Ding, Yunhong; Frellsen, Louise Floor; Guan, Xiaowei

    2016-01-01

    Space division multiplexing (SDM) is currently widely investigated in order to provide enhanced capacity thanks to the utilization of space as a new degree of multiplexing freedom in both optical fiber communication and on-chip interconnects. Basic components allowing the processing of spatial...... photonic integrated circuit mode (de) multiplexer for few-mode fibers (FMFs)....

  15. Recent Progress in Space-Division Multiplexed Transmission Technologies

    DEFF Research Database (Denmark)

    Morioka, Toshio

    2013-01-01

    Recent development of transmission technologies based on space-division multiplexing is described with future perspectives including a recent achievement of one Pb/s transmission in a single strand of fiber....

  16. Evaluating technology service options.

    Science.gov (United States)

    Blumberg, D F

    1997-05-01

    Four service and support options are available to healthcare organizations for maintaining their growth arsenals of medical and information technology. These options include maintaining and servicing all equipment using a facility-based biomedical engineering and MIS service department; using a combination of facility-based service and subcontracted service; expanding facility-based biomedical and MIS service departments to provide service to other healthcare organizations to achieve economies of scale; and outsourcing all maintenance, repair, and technical support services. Independent service companies and original equipment manufacturers (OEMs) are offering healthcare organizations a wider array of service and support capabilities than ever before. However, some health systems have successfully developed their own independent service organizations to take care of their own--and other healthcare organizations'--service and support needs.

  17. Taylor revisited: Gender segregation and division of labour in the ICT - sector (information and communication technology)

    DEFF Research Database (Denmark)

    Nygaard, Else

    2001-01-01

    Information and communication technology, division of labour, gender segregation, working conditions......Information and communication technology, division of labour, gender segregation, working conditions...

  18. NWS Water Resource Services Branch Division

    Science.gov (United States)

    the NWS homepage NWS Water Resources Program OS Home News Organization Search Search Home About Us Water Resources Policy Flood Loss Data AHPS Program Office (OHD) AHPS Software Development Hydrology Lab AHPS Toolbox Flood Safety Service Hydrology Program Turn Around Don't Drown! High Water Mark Signs

  19. Administrative Services Division - Alaska Department of Law

    Science.gov (United States)

    accounting practices and procedures. JoAnn Pelayo Finance Officer Email: joann.pelayo@alaska.gov Tel: (907 @alaska.gov Tel: (907) 465-3674 Fiscal and Accounting Provide centralized fiscal and accounting functions for , inter-departmental payments for core services, payroll accounting adjustments and oversight, and grant

  20. Laser and Plasma Technology Division annual report 1995

    International Nuclear Information System (INIS)

    Venkatramani, N.

    1996-01-01

    This report describes the activity of the Laser and Plasma Technology Division of Bhabha Atomic Research Centre, Mumbai during the period 1995. This division is engaged in the research and development of high power beams namely lasers, plasma and electron beams which are characterized by high power density. This division has strived to establish indigenous capability to cater to the requirements of the Department of Atomic Energy. The broad program objectives of the division are (1) development and technology readiness studies of laser, plasma and electron beam devices; (2) studies on related physical phenomena with a view to gain better understanding of the devices and (3) improvements in technology and exploration of new areas. This report has been compiled from individual reports of various groups/sections with marginal editing. At the end of each section; a list of publications by the staff members in the field indicated by the title of the section is given. refs., figs., tabs

  1. 75 FR 39044 - Unisys Corporation, Technology Business Segment, Unisys Information Technology Division, Formerly...

    Science.gov (United States)

    2010-07-07

    ..., Technology Business Segment, Unisys Information Technology Division, Formerly Known as BETT, Including... Assistance on April 29, 2010, applicable to workers of Unisys Corporation, Technology Business Segment... employees under the control of the Plymouth, Michigan location of Unisys Corporation, Technology Business...

  2. Division of Environmental Control Technology program, 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    Environmental engineering programs are reviewed for the following technologies; coal; petroleum and gas; oil shale; solar; geothermal and energy conservation; nuclear energy; and decontamination and decommissioning. Separate abstracts were prepared for each technology. (MHR)

  3. International Technology Exchange Division: 1993 Annual report

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES`s goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM`s policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM`s training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  4. International Technology Exchange Division: 1993 Annual report

    International Nuclear Information System (INIS)

    1993-01-01

    The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES's goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM's policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM's training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

  5. Accelerator Technology Division annual report, FY 1989

    International Nuclear Information System (INIS)

    1990-06-01

    This paper discusses: accelerator physics and special projects; experiments and injectors; magnetic optics and beam diagnostics; accelerator design and engineering; radio-frequency technology; accelerator theory and simulation; free-electron laser technology; accelerator controls and automation; and high power microwave sources and effects

  6. Laser and Plasma Technology Division annual report 1993

    International Nuclear Information System (INIS)

    Venkatramani, N.; Verma, R.L.

    1994-01-01

    This report describes the activities of the Laser and Plasma Technology Division during the year 1993. This Division is engaged in the research and development of high power beams namely laser, plasma and electron beams, which are characterized by high power density, normally in excess of 1 kW/mm 2 . Laser and Plasma Technology Division has strived to establish indigenous capability to cater to the requirements of the Department of Atomic Energy. The broad programme objectives of the Division are : (1) Development and technology readiness studies of laser, plasma and electron beam devices, (2) Studies on related physical phenomena with a view to gain better understanding of the devices, and (3) Improvements in technology and exploration of new areas. This report covers the activities of the Division during 1993 and describes how successfully the objectives have been met. The activities described in the report are diverse in nature. The report has been compiled from individual reports of various groups/sections with marginal editing. (author). refs., tabs., figs

  7. Laser and Plasma Technology Division annual report 1993

    Energy Technology Data Exchange (ETDEWEB)

    Venkatramani, N; Verma, R L [eds.; Bhabha Atomic Research Centre, Bombay (India). Laser and Plasma Technology Div.

    1994-12-31

    This report describes the activities of the Laser and Plasma Technology Division during the year 1993. This Division is engaged in the research and development of high power beams namely laser, plasma and electron beams, which are characterized by high power density, normally in excess of 1 kW/mm{sup 2}. Laser and Plasma Technology Division has strived to establish indigenous capability to cater to the requirements of the Department of Atomic Energy. The broad programme objectives of the Division are : (1) Development and technology readiness studies of laser, plasma and electron beam devices, (2) Studies on related physical phenomena with a view to gain better understanding of the devices, and (3) Improvements in technology and exploration of new areas. This report covers the activities of the Division during 1993 and describes how successfully the objectives have been met. The activities described in the report are diverse in nature. The report has been compiled from individual reports of various groups/sections with marginal editing. (author). refs., tabs., figs.

  8. Information Technology Service

    International Nuclear Information System (INIS)

    Ageron, M.; Boninchi, V.; Chartoire, M.; Combroux, A.; Giraud, N.; Jacquet, G.; Lagrange, B.; Malleret, S.; Martin, C.; Mas, J.; Morgue, M.; Ollivier, T.

    1998-01-01

    The information technology service works out the choices concerning the information technology systems of general use in the laboratory: computers, network, peripherals, workstations, software. It intervenes at the same time in the definition of the procedures and equipment specific to the research groups. The entire data acquisition is centralized by the service. The personnel is sharing the following two large directions of activities: - management of information technology park (setup, configuration and maintenance of the materials and soft ensemble, training and assistance afforded to users); - participation in software projects either in elaboration of applications or in realization and maintenance of specific tools

  9. Accelerator Technology Division progress report, FY 1992

    International Nuclear Information System (INIS)

    Schriber, S.O.; Hardekopf, R.A.; Heighway, E.A.

    1993-07-01

    This report briefly discusses the following topics: The Ground Test Accelerator Program; Defense Free-Electron Lasers; AXY Programs; A Next Generation High-Power Neutron-Scattering Facility; JAERI OMEGA Project and Intense Neutron Sources for Materials Testing; Advanced Free-Electron Laser Initiative; Superconducting Supercollider; The High-Power Microwave (HPM) Program; Neutral Particle Beam (NPB) Power Systems Highlights; Industrial Partnering; Accelerator Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Accelerator Design and Engineering; Radio-Frequency Technology; Accelerator Theory and Free-Electron Laser Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operations

  10. Accelerator Technology Division annual report, FY 1991

    International Nuclear Information System (INIS)

    1992-04-01

    This report discusses the following programs: The Ground Test Accelerator Program; APLE Free-Electron Laser Program; Accelerator Transmutation of Waste; JAERI, OMEGA Project, and Intense Neutron Source for Materials Testing; Advanced Free-Electron Laser Initiative; Superconducting Super Collider; The High-Power Microwave Program; Φ Factory Collaboration; Neutral Particle Beam Power System Highlights; Accelerator Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Accelerator Design and Engineering; Radio-Frequency Technology; Free-Electron Laser Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operations

  11. Accelerator Technology Division progress report, FY 1992

    Energy Technology Data Exchange (ETDEWEB)

    Schriber, S.O.; Hardekopf, R.A.; Heighway, E.A.

    1993-07-01

    This report briefly discusses the following topics: The Ground Test Accelerator Program; Defense Free-Electron Lasers; AXY Programs; A Next Generation High-Power Neutron-Scattering Facility; JAERI OMEGA Project and Intense Neutron Sources for Materials Testing; Advanced Free-Electron Laser Initiative; Superconducting Supercollider; The High-Power Microwave (HPM) Program; Neutral Particle Beam (NPB) Power Systems Highlights; Industrial Partnering; Accelerator Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Accelerator Design and Engineering; Radio-Frequency Technology; Accelerator Theory and Free-Electron Laser Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operations.

  12. Accelerator Technology Division progress report, FY 1993

    International Nuclear Information System (INIS)

    Schriber, S.O.; Hardekopf, R.A.; Heighway, E.A.

    1993-01-01

    This report discusses the following topics: A Next-Generation Spallation-Neutron Source; Accelerator Performance Demonstration Facility; APEX Free-Electron Laser Project; The Ground Test Accelerator (GTA) Program; Intense Neutron Source for Materials Testing; Linac Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Radio-Frequency Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operation

  13. 76 FR 66327 - Iron Mountain Information Management, Inc., Corporate Service Group, Information Technology (IT...

    Science.gov (United States)

    2011-10-26

    ... Management, Inc., Corporate Service Group, Information Technology (IT) Division, Including On-Site Leased... Information Management, Inc., Corporate Service Group, Information Technology (IT) Division, including on-site... location of Iron Mountain Information Management, Inc., Corporate Service Group, Information Technology (IT...

  14. Materials and Components Technology Division research summary, 1992

    International Nuclear Information System (INIS)

    1992-11-01

    The Materials and Components Technology Division (MCT) provides a research and development capability for the design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs related to nuclear energy support the development of the Integral Fast Reactor (IFR): life extension and accident analyses for light water reactors (LWRs); fuels development for research and test reactors; fusion reactor first-wall and blanket technology; and safe shipment of hazardous materials. MCT Conservation and Renewables programs include major efforts in high-temperature superconductivity, tribology, nondestructive evaluation (NDE), and thermal sciences. Fossil Energy Programs in MCT include materials development, NDE technology, and Instrumentation design. The division also has a complementary instrumentation effort in support of Arms Control Technology. Individual abstracts have been prepared for the database

  15. 78 FR 48466 - Hewlett Packard Company, Printing & Personal System Americas Division, Marketing Services...

    Science.gov (United States)

    2013-08-08

    ..., Printing & Personal System Americas Division, Marketing Services, Houston, Texas; Notice of Investigation... Division, Marketing Services, Houston, Texas. On January 25, 2013, the Department issued a Notice of... & Personal System Americas Division, Marketing Services, Houston, Texas) to be filed. Because the later-filed...

  16. SERVICE HANDBOOK FOR THE DESKTOP SUPPORT CONTRACT WIH IT DIVISION

    CERN Multimedia

    2000-01-01

    A Desktop Support Contract has been running since January 1999 to offer help to all users at CERN with problems that occur with their desktop computers. The contract is run conjointly by the Swedish Company WM-data and the Swiss company DCS.The contract is comprised of the Computing Helpdesk, a General Service for all parts of CERN and also Local Service for those divisions and groups that want faster response times and additional help with their specific computer environment.In order to describe what services are being offered, and also to give a better understanding of the structure of the contract, a Service Handbook has been created. The intended audience for the Service Handbook is everyone that is using the contract, i.e. users, managers and also the service staff inside the contract. In the handbook you will find what help you can get from the contract, how to get in touch with the contract, and also what response times you can expect. Since the computer environment at CERN is a never-changing entity, ...

  17. Laser and Plasma Technology Division : annual report (1990-91)

    International Nuclear Information System (INIS)

    1991-01-01

    A brief account of the research and development (R and D) activities carried out by Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Bombay during the period 1990-91 is presented. The R and D activities are reported under the headings: 1) Laser Activities, 2) Thermal Plasma Activities, and 3) Electron Beam Activities. List of publications including journal articles, papers published in symposia, conferences etc. is given at the end. (original). figs

  18. Laser and Plasma Technology Division annual report 1994

    International Nuclear Information System (INIS)

    Venkatramani, N.; Verma, R.L.

    1995-01-01

    A brief account of the research and development (R and D) activities carried out by Laser and Plasma Technology Division of Bhabha Atomic Research Centre, Bombay during the period 1994 is presented. The activities are reported under the headings: 1) laser activities, 2) thermal plasma activities, 3) electron beam activity. At the end of each section, a list of publications by the staff members in the field indicated by the title of the section is given. (author). refs., tabs., figs

  19. Laser and Plasma Technology Division : annual report 1991

    International Nuclear Information System (INIS)

    1992-01-01

    A brief account of the research and development (R and D) activities carried out by Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Bombay during 1991 is presented. The R and D activities are reported under the headings (1) Laser Activities, (2) Thermal Plasma Activities, (3) Electron Beam Activities and (4) Divisional Workshop Activities. List of publications is given at the end of each activity heading

  20. American Chemical Society. Division of Nuclear Chemistry and Technology

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The meeting of the 201st American Chemical Society Division of Nuclear Chemistry and Technology was comprised from a variety of topics in this field including: nuclear chemistry, nuclear physics, and nuclear techniques for environmental studies. Particular emphasis was given to fundamental research concerning nuclear structure (seven of the nineteen symposia) and studies of airborne particle monitoring and transport (five symposia). 105 papers were presented

  1. Laser and Plasma Technology Division annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    Venkatramani, N; Verma, R L [eds.; Bhabha Atomic Research Centre, Bombay (India). Laser and Plasma Technology Div.

    1996-12-31

    A brief account of the research and development (R and D) activities carried out by Laser and Plasma Technology Division of Bhabha Atomic Research Centre, Bombay during the period 1994 is presented. The activities are reported under the headings: (1) laser activities, (2) thermal plasma activities, (3) electron beam activity. At the end of each section, a list of publications by the staff members in the field indicated by the title of the section is given. (author). refs., tabs., figs.

  2. Advances in nickel hydrogen technology at Yardney Battery Division

    Science.gov (United States)

    Bentley, J. G.; Hall, A. M.

    1987-01-01

    The current major activites in nickel hydrogen technology being addressed at Yardney Battery Division are outlined. Five basic topics are covered: an update on life cycle testing of ManTech 50 AH NiH2 cells in the LEO regime; an overview of the Air Force/industry briefing; nickel electrode process upgrading; 4.5 inch cell development; and bipolar NiH2 battery development.

  3. 76 FR 4733 - Atlantic Southeast Airlines, a Subsidiary of Skywest, Inc., Airport Customer Service Division...

    Science.gov (United States)

    2011-01-26

    ... Airlines, a Subsidiary of Skywest, Inc., Airport Customer Service Division, Fort Smith, AR; Notice of... Customer Service Division v. United States Secretary of Labor (Court No. 09- 00522). On September 28, 2009... 35. Workers at the subject firm (subject worker group) provided airline customer services. AR 4,8,14...

  4. 76 FR 78950 - FBI Criminal Justice Information Services Division; Revised User Fee Schedule

    Science.gov (United States)

    2011-12-20

    ... amounts for volunteers, as explained at 75 FR 18752, and Centralized Billing Service Providers (CBSPs), as... Information Services Division; Revised User Fee Schedule AGENCY: Federal Bureau of Investigation (FBI.... Enourato, Section Chief, Resources Management Section, Criminal Justice Information Services Division, FBI...

  5. A Survivable Wavelength Division Multiplexing Passive Optical Network with Both Point-to-Point Service and Broadcast Service Delivery

    Science.gov (United States)

    Ma, Xuejiao; Gan, Chaoqin; Deng, Shiqi; Huang, Yan

    2011-11-01

    A survivable wavelength division multiplexing passive optical network enabling both point-to-point service and broadcast service is presented and demonstrated. This architecture provides an automatic traffic recovery against feeder and distribution fiber link failure, respectively. In addition, it also simplifies the protection design for multiple services transmission in wavelength division multiplexing passive optical networks.

  6. Laser and Plasma Technology Division annual report 1992

    International Nuclear Information System (INIS)

    Venkatramani, N.; Verma, R.L.

    1993-01-01

    The report describes the research and development (R and D) activities of Laser and Plasma technology Division, Bhabha Atomic Research Centre, Bombay during 1992. The broad programme objectives of the Division are: (1) development and technology readiness studies of laser, plasma and electron beam devices, (2) studies on related physical phenomena with a view to gain better understanding of the devices, and (3) improvements in technology and exploration of new areas. The R and D activities are reported under the sections entitled: (1) Laser Activities, (2) Thermal Plasma Activities, and (3) Electron Beam Activities. At the end of each section, a list of publications by the staff members in the field indicated by the title of the section is given. Some of the highlights of R and D work during 1992 are:(1) fabrication of an electron beam sustained CO 2 laser, (2) commissioning of a 6.5 m high LMMHD (Liquid Metal Magneto-hydrodynamic) generator loaded with 1.5 tons of mercury, (3) fabrication of electron beam processing equipment, and (4) study of the magnetic properties of vanadium nitride films produced by reactive sputtering in an indigenously developed DC magnetron sputtering equipment. (author). 56 figs., 6 tabs

  7. Materials and Components Technology Division research summary, 1991

    International Nuclear Information System (INIS)

    1991-04-01

    This division has the purpose of providing a R and D capability for design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs are in support of the Integral Fast Reactor, life extension for light water reactors, fuels development for the new production reactor and research and test reactors, fusion reactor first-wall and blanket technology, safe shipment of hazardous materials, fluid mechanics/materials/instrumentation for fossile energy systems, and energy conservation and renewables (including tribology, high- temperature superconductivity). Separate abstracts have been prepared for the data base

  8. Materials and Components Technology Division research summary, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    This division has the purpose of providing a R and D capability for design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs are in support of the Integral Fast Reactor, life extension for light water reactors, fuels development for the new production reactor and research and test reactors, fusion reactor first-wall and blanket technology, safe shipment of hazardous materials, fluid mechanics/materials/instrumentation for fossile energy systems, and energy conservation and renewables (including tribology, high- temperature superconductivity). Separate abstracts have been prepared for the data base.

  9. Long life technology work at Rockwell International Space Division

    Science.gov (United States)

    Huzel, D. K.

    1974-01-01

    This paper presents highlights of long-life technology oriented work performed at the Space Division of Rockwell International Corporation under contract to NASA. This effort included evaluation of Saturn V launch vehicle mechanical and electromechanical components for potential extended life capabilities, endurance tests, and accelerated aging experiments. A major aspect was evaluation of the components at the subassembly level (i.e., at the interface between moving surfaces) through in-depth wear analyses and assessments. Although some of this work is still in progress, preliminary conclusions are drawn and presented, together with the rationale for each. The paper concludes with a summary of the effort still remaining.

  10. 20 CFR 230.5 - Exception concerning service to a local lodge or division.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Exception concerning service to a local lodge... to a local lodge or division. In determining whether an annuity is subject to the provisions of this... lodge or division of a railway-labor-organization employer if the compensation for such service is...

  11. 75 FR 65525 - Anthem Blue Cross Blue Shield, Claim Management Services, Inc. Operations, a Division of...

    Science.gov (United States)

    2010-10-25

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,327] Anthem Blue Cross Blue Shield, Claim Management Services, Inc. Operations, a Division of Wellpoint, Inc., Green Bay, WI; Notice... former workers of Anthem Blue Cross Blue Shield, Claim Management Services, Inc. Operations, a Division...

  12. 77 FR 48550 - Technicolor Creative Services, Post Production Feature Mastering Division Including On-Site...

    Science.gov (United States)

    2012-08-14

    ... Services, Post Production Feature Mastering Division Including On-Site Leased Workers From Ajilon... Services, Post Production Feature Mastering Division, Hollywood, California (subject firm). The worker... the workers meet the eligibility requirements of the Trade Act of 1974. Conclusion After careful...

  13. 76 FR 13662 - Hewlett Packard Company, Enterprise Business Division, Technical Services America, Global Parts...

    Science.gov (United States)

    2011-03-14

    ... Packard Company, Enterprise Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers From QFlex, North America Logistics, and UPS, Headquartered in Palo Alto, CA... Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers...

  14. 76 FR 10394 - Hewlett Packard Company, Enterprise Business Division, Technical Services America, Global Parts...

    Science.gov (United States)

    2011-02-24

    ... Packard Company, Enterprise Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers From Qflex, North America Logistics, and UPS, Headquartered in Palo Alto, CA... Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers...

  15. Division of tongue tie: review of practice through a tertiary paediatric otorhinolaryngology service.

    LENUS (Irish Health Repository)

    Glynn, R W

    2012-10-01

    Recent NICE guidance declared that evidence regarding surgical division of tongue tie was adequate to support the use of the procedure, provided that normal arrangements are in place for consent, audit and clinical governance. This work aimed to carry out a retrospective review of those patients who have previously undergone tongue tie division through a tertiary paediatric otorhinolaryngology service. We further aimed to identify the referral patterns, indications for, and outcomes following, division.

  16. Publications and services of the Cryogenics Division, National Bureau of Standards, 1953--1977. Technical note

    International Nuclear Information System (INIS)

    Frizen, D.J.; Mendenhall, J.R.

    1978-04-01

    This NBS Technical Note catalogs the publications of the Cryogenics Division, along with author and subject indexes, for the period 1953 through 1977. It also contains a listing of available thermodynamic properties charts, bibliographies, and miscellaneous reports of cryogenic interest. A resume of the activities of and services provided by the Cryogenics Division is also included

  17. 76 FR 14697 - Amdocs, Inc., Global Support Services, Advertising and Media AT&T Division, New Haven, CT; Notice...

    Science.gov (United States)

    2011-03-17

    ... Support Services, Advertising and Media AT&T Division, New Haven, CT; Notice of Revised Determination on... Amdocs, Inc., Global Support Services, Advertising and Media AT&T Division, New Haven, Connecticut to...: All workers of Amdocs, Inc., Global Support Services, Advertising and Media AT&T Division, New Haven...

  18. The ORNL Chemical Technology Division, 1950-1994

    Energy Technology Data Exchange (ETDEWEB)

    Jolley, R.L.; Genung, R.K.; McNeese, L.E.; Mrochek, J.E.

    1994-10-01

    This document attempts to reconstruct the role played by the Chemical Technology Division (Chem Tech) of the Oak Ridge National Laboratory (ORNL) in the atomic era since the 1940`s related to the development and production of nuclear weapons and power reactors. Chem Tech`s early contributions were landmark pioneering studies. Unknown and dimly perceived problems like chemical hazards, radioactivity, and criticality had to be dealt with. New chemical concepts and processes had to be developed to test the new theories being developed by physicists. New engineering concepts had to be developed and demonstrated in order to build facilities and equipment that had never before been attempted. Chem Tech`s role was chemical separations, especially uranium and plutonium, and nuclear fuel reprocessing. With diversification of national and ORNL missions, Chem Tech undertook R&D studies in many areas including biotechnology; clinical and environmental chemistry; nuclear reactors; safety regulations; effective and safe waste management and disposal; computer modeling and informational databases; isotope production; and environmental control. The changing mission of Chem Tech are encapsulated in the evolving activities.

  19. Islands of globalisation: offshore services and the changing spatial divisions of labour

    NARCIS (Netherlands)

    Kleibert, J.M.

    2015-01-01

    The changing international division of labour presents opportunities for developing countries to attract foreign investments and generate employment in the offshore service sector. This paper focuses on developments in the Philippines, which has become a large exporter of business process

  20. Internet technologies and information services

    CERN Document Server

    Miller, Joseph

    2014-01-01

    Internet Technologies and Information Services: Second Edition is a vital asset to students preparing for careers in library and information science and provides expanded coverage to important new developments while still covering Internet foundations. In addition to networking, the Internet, HTML, web design, web programming, XML, and web searching, this new edition covers additional topics such as cloud computing, content management systems, eBook technologies, mobile technologies and applications, relational database management systems (RDMS), open source software, and virtual priva

  1. Bendix Kansas City Division technological spinoff through 1978

    International Nuclear Information System (INIS)

    Barnes, H.T.

    1979-02-01

    The results of work of Bendix Kansas City Division are made available in the form of technical reports that are processed through the DOE Technical Information Center in Oak Ridge. The present report lists the documents released by the Division, along with author and subject indexes. Drawing sets released are also listed. Locations of report collections in the U.S., other countries, and international agencies are provided

  2. 76 FR 5831 - Amdocs, Inc., Global Support Services, Advertising And Media AT&T Division, New Haven...

    Science.gov (United States)

    2011-02-02

    ... Support Services, Advertising And Media AT&T Division, New Haven, Connecticut; Notice of Affirmative... workers and former workers of Amdocs, Inc., Global Support Services, Advertising and Media AT&T Division..., Advertising and Media AT&T Division. The investigation also revealed that the firm is not a Supplier or...

  3. 76 FR 24914 - Digital River Education Services, Inc., a Division of Digital River, Inc., Including Workers...

    Science.gov (United States)

    2011-05-03

    ... Digital River Education Services acquired Journey Education Marketing (JEM) in August 2010. Some workers... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,975] Digital River Education Services, Inc., a Division of Digital River, Inc., Including Workers Whose Unemployment Insurance (UI...

  4. Technology-enabled division of labour: the use of handhelds

    NARCIS (Netherlands)

    Benders, J.G.J.M.; Schouteten, R.L.J.; Ruijsscher, C. de

    2012-01-01

    Using the task pool model and data from 15 establishments in the Dutch hospitality industry, this study shows how and why applying handhelds affects the division of labour. These devices allow to split the waiters' jobs into separate tasks which tend to be combined into two separate "sub jobs": the

  5. Technology-enabled division of labour : The use of handhelds

    NARCIS (Netherlands)

    Benders, J.G.J.M.; Schouteten, R.; de Ruijsscher, C.

    2012-01-01

    Using the task pool model and data from 15 establishments in the Dutch hospitality industry, this study shows how and why applying handhelds affects the division of labour. These devices allow to split the waiters' jobs into separate tasks which tend to be combined into two separate "sub jobs": the

  6. The Chemical Technology Division at Argonne National Laboratory: Applying chemical innovation to environmental problems

    International Nuclear Information System (INIS)

    1995-01-01

    The Chemical Technology Division is one of the largest technical divisions at Argonne National Laboratory, a leading center for research and development related to energy and environmental issues. Since its inception in 1948, the Division has pioneered in developing separations processes for the nuclear industry. The current scope of activities includes R ampersand D on methods for disposing of radioactive and hazardous wastes and on energy conversion processes with improved efficiencies, lower costs, and reduced environmental impact. Many of the technologies developed by CMT can be applied to solve manufacturing as well as environmental problems of industry

  7. 20 CFR 204.7 - Employment relation-service to a local lodge or division of a railway labor organization.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Employment relation-service to a local lodge... relation—service to a local lodge or division of a railway labor organization. Service by an individual to a local lodge or division of a railway labor organization shall be creditable under the Railroad...

  8. 78 FR 28643 - Technicolor Creative Services, Post Production Feature Mastering Division, Hollywood, California...

    Science.gov (United States)

    2013-05-15

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-81,335] Technicolor Creative Services, Post Production Feature Mastering Division, Hollywood, California; Notice of Termination of Reconsideration Investigation Pursuant to Section 221 of the Trade Act of 1974, as amended, a reconsideration investigation was initiated in on August ...

  9. 78 FR 70579 - Deluxe Laboratories, Inc., a Division of Deluxe Entertainment Services Group, Inc. Hollywood...

    Science.gov (United States)

    2013-11-26

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-82,442] Deluxe Laboratories, Inc., a Division of Deluxe Entertainment Services Group, Inc. Hollywood, California; Notice of Revised Determination on Reconsideration On July 23, 2013, the Department of Labor (Department) issued a Notice of Affirmative Determination Regarding...

  10. 75 FR 64303 - Vermont Marble Power, Division of Omya Inc.; Central Vermont Public Service Corporation; Notice...

    Science.gov (United States)

    2010-10-19

    ...-029; 2445-023; 2558-029] Vermont Marble Power, Division of Omya Inc.; Central Vermont Public Service... Soliciting Comments and Motions To Intervene October 12, 2010. On August 31, 2010, Vermont Marble Power... relicensing. Applicant Contacts: For transferor: Todd Allard, Operations Engineer Omya, Inc., Vermont Marble...

  11. 78 FR 13662 - Kansas Gas Service, a Division of ONEOK, Inc.; Notice of Petition

    Science.gov (United States)

    2013-02-28

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR13-18-001] Kansas Gas Service, a Division of ONEOK, Inc.; Notice of Petition Take notice that on February 6, 2013, Kansas Gas... fully detailed in the petition. Any person desiring to participate in this rate filing must file in...

  12. Development of a Process to Internationalize Occupational Programs in the Consumer and Hospitality Services Division.

    Science.gov (United States)

    Advincula-Carpenter, Marietta M.

    The purpose of a practicum project was to develop a process to internationalize occupational programs in the consumer and hospitality services division (CHSD). Five procedures were used to complete the project. First, a review of literature was conducted on how other colleges had internalized their courses. It included some research and practices…

  13. Summary of beryllium electrorefining technology developed by KBI Division of Cabot Berylco Inc

    International Nuclear Information System (INIS)

    Pistole, C.O.

    1983-01-01

    Proprietary beryllium electrorefining technology has been purchased from the KBI Division of Cabot Berylco Inc. by Rockwell International, Rocky Flats Plant, as part of a DOE beryllium option study. This technology has been reviewed and is summarized. 12 figures, 7 tables

  14. Geospatial Technology Applications and Infrastructure in the Biological Resources Division.

    Science.gov (United States)

    1998-09-01

    Forestry/forest ecology Geography Geology GIS/mapping technologies GPS technology HTML/World Wide Web Information management/transfer JAVA Land...tech- nologies are being used to understand diet selection, habitat use, hibernation behavior, and social interactions of desert tortoises

  15. Technology Solutions for School Food Service.

    Science.gov (United States)

    Begalle, Mary

    2002-01-01

    Considers ways to include schools' food service departments in technology planning. Discusses school food service software applications, considerations and challenges of automating food service operations, and business-to-business Internet solutions. (EV)

  16. The Service Failure and Recovery in the Information Technology Services

    OpenAIRE

    Jun Luo; Weiguo Zhang.; Dabin Qin

    2010-01-01

    It is important to retain customer satisfaction in information technology services. When a service failure occurs, companies need to take service recovery action to recover their customer satisfaction. Although companies cannot avoid all problems and complaints, they should try to make up. Therefore, service failure and service recovery have become an important and challenging issue for companies. In this paper, the literature and the problems in the information technolog...

  17. Chemical Technology Division progress report for the period July 1, 1988 to September 30, 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    This progress report summarizes the research and development efforts conducted in the Chemical Technology Division (Chem Tech) during the period July 1, 1988, through September 30, 1989. The following major areas are covered: waste management and environmental programs, the Waste Management Technology Center, radiochemical and isotope programs, basic science and technology, Nuclear Regulatory Commission and Electric Power Research Institute severe accident research programs, the Office of Safety and Operational Readiness, and administrative resources and facilities.

  18. Delivering service adaptation with 3G technology

    NARCIS (Netherlands)

    Liotta, A.; Yew, A.; Bohoris, C.; Pavlou, G.; Feridun, M.; Kropf, P.G.; Babin, G.

    2002-01-01

    Now that 3G technologies have reached their maturity, newly advanced services can be delivered to the mobile user. These include context- aware services, adaptable services and Virtual Home Environment (VHE)-like services. Important research issues relate, however, to managing such services through

  19. The Association for Educational Communications and Technology: Division of School Media Specialists.

    Science.gov (United States)

    Miller, Mary Mock

    1993-01-01

    Reports on the Division of School Media Specialists of the Association for Educational Communications and Technology (AECT). Highlights include the mission statement; publications; board members and committee chairs; activities at the AECT conferences; and future concerns, including public relations and marketing plans for media specialists and…

  20. 78 FR 8587 - Thomson Reuters, Finance Operations & Technology Division, Including On-Site Leased Workers From...

    Science.gov (United States)

    2013-02-06

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-81,755] Thomson Reuters, Finance Operations & Technology Division, Including On-Site Leased Workers From Adecco; Eagan, MN; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of the Trade Act of 1974, as amended (`...

  1. RESEARCH AREA -- ARTIFICIAL INTELLIGENCE CONTROL (AIR POLLUTION TECHNOLOGY BRANCH, AIR POLLUTION PREVENTION AND CONTROL DIVISION, NRMRL)

    Science.gov (United States)

    The Air Pollution Technology Branch (APTB) of NRMRL's Air Pollution Prevention and Control Division in Research Triangle Park, NC, has conducted several research projects for evaluating the use of artificial intelligence (AI) to improve the control of pollution control systems an...

  2. Progress report for 1978-87 of the Food Technology and Enzyme Engineering Division

    International Nuclear Information System (INIS)

    Adhikari, H.R.; Ninjoor, V.; Satyanarayan, V.

    1988-01-01

    The salient features of the research and development (R and D) activities of the Food Technology and Enzyme Engineering Division of the Bhabha Atomic Research Centre, Bombay, during the decade 1978-1987 are summarized. The Division was a part of the erstwhile Biochemistry and Food Technology which was bifurcated in 1985. The main thrust of the Division's R and D work is directed towards the development of appropriate technologies for radiation preservation of agricultural produce in natural form for prolonged periods without any perceptible change in quality attributes. The suitable parameters have been evolved to apply radiation technology for: (1) arresting sprouting losses in turbers and bulbs, (2) controlling infestation of cereals, spices and ready to eat food items, by insects, microbial pests and pathogens and (3) controlling spoilage of sea foods, fruits and vegetables. It is remarkable to note that the data collected during wholesomeness and toxicological studies of various irradiated food products have been used by the Joint Expert Committee on Food Irradiation of WHO/IAEA/FAO to accord unconditional health and safety clearance to irradiation process using upto 10 KGy radiation doses. The products treated with gamma radiation within this limit do not require toxicological evaluation. The technique for poly-valent radio-vaccine infective diseases in farm animals have been standardized and a vaccine to prevent Salmonella infection in poultry is undergoing field trials in farms. The other activities of the Division are in the fields of enzyme technology, photosynthetic process, and toxicity and genotoxicity of food ingredients and additives. Lists of staff-members of the Division and their publications, their participation in various symposia, seminars, conferences etc. are appended. (M.G.B.)

  3. Designing Personalization in Technology-Based Services

    Science.gov (United States)

    Lee, Min Kyung

    2013-01-01

    Personalization technology has the potential to optimize service for each person's unique needs and characteristics. One way to optimize service is to allow people to customize the service themselves; another is to proactively tailor services based on information provided by people or inferred from their past behaviors. These approaches function…

  4. Employee retention within the Information Technology Division of a South African Bank

    Directory of Open Access Journals (Sweden)

    Joy Mohlala

    2012-05-01

    Research purpose: To understand the challenges faced by the bank’s information technology leadership team to retain employees. Motivation for the study: To understand the challenges faced in attracting and retaining information technology professionals, and how this can serve as input for reducing skills shortages in Information Technology Divisions. Research design, approach and method: An interpretive approach employing a case study strategy and qualitative methods was employed. Semi structured interviews were conducted with thirteen senior managers and four directors of the bank’s Information Technology Division, who were selected on a purposive basis. Data were subjected to Creswell’s four stage data analysis process. Main findings: Findings indicate that employee turnover is the main contributor of skills shortages within the studied division. The lack of a retention strategy is making it difficult for leadership to identify crucial skills that must be retained. Practical/managerial implications: Evidence suggests that this bank, although they would like to retain information technology professionals, is not creating an environment conducive to do this, as little attention is paid to the unique demands of this group of employees. Contribution/value-add: This study investigates a specific group of employees for which a unique retention strategy does not exist. In understanding the challenges that impact on attracting and retaining information technology professionals, this study can contribute to the development of a retention strategy for these employees.

  5. Service technologies as factor of service and tourism companies' competitiveness

    OpenAIRE

    Zhanna Gornostaeva; Vladimir Zhidkov

    2014-01-01

    The authors define the role of service technology in shaping the quality of service and tourism companies, the authors' method of measuring the quality of service and tourism businesses and developing a conceptual model of quality of service and the conceptual model of the internal quality of the service, and also carry out testing of the model on the example of the 'Intourist' Hotel in Volgograd, Russia.

  6. Technology Development, Evaluation, and Application (TDEA) FY 2001 Progress Report Environment, Safety, and Health (ESH) Division

    Energy Technology Data Exchange (ETDEWEB)

    L.G. Hoffman; K. Alvar; T. Buhl; E. Foltyn; W. Hansen; B. Erdal; P. Fresquez; D. Lee; B. Reinert

    2002-05-01

    This progress report presents the results of 11 projects funded ($500K) in FY01 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division (ESH). Five projects fit into the Health Physics discipline, 5 projects are environmental science and one is industrial hygiene/safety. As a result of their TDEA-funded projects, investigators have published sixteen papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplement funds and in-kind contributions, such as staff time, instrument use, and workspace, were also provided to TDEA-funded projects by organizations external to ESH Divisions.

  7. Technology Development, Evaluation, and Application (TDEA) FY 1999 Progress Report, Environment, Safety, and Health (ESH) Division

    Energy Technology Data Exchange (ETDEWEB)

    Larry G. Hoffman

    2000-12-01

    This progress report presents the results of 10 projects funded ($500K) in FY99 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division. Five are new projects for this year; seven projects have been completed in their third and final TDEA-funded year. As a result of their TDEA-funded projects, investigators have published thirty-four papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplemental funds and in-kind contributions, such as staff time, instrument use, and work space, were also provided to TDEA-funded projects by organizations external to ESH Division.

  8. Chemical Technology Division progress report, July 1, 1991--December 31, 1992

    International Nuclear Information System (INIS)

    Genung, R.K.; Hightower, J.R.; Bell, J.T.

    1993-05-01

    This progress report reviews the mission of the Chemical Technology Division (Chem Tech) and presents a summary of organizational structure, programmatic sponsors, and funding levels for the period July 1, 1991, through December 31, 1992. The report also summarizes the missions and activities of organizations within Chem Tech for the reporting period. Specific projects performed within Chem Tech's energy research programs, waste and environmental programs, and radiochemical processing programs are highlighted. Special programmatic activities conducted by the division are identified and described. Other information regarding publications, patents, awards, and conferences organized by Chem Tech staff is also included

  9. Technology Development, Evaluation, and Application (TDEA) FY 1999 Progress Report, Environment, Safety, and Health (ESH) Division

    International Nuclear Information System (INIS)

    Hoffman, Larry G.

    2000-01-01

    This progress report presents the results of 10 projects funded ($500K) in FY99 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division. Five are new projects for this year; seven projects have been completed in their third and final TDEA-funded year. As a result of their TDEA-funded projects, investigators have published thirty-four papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplemental funds and in-kind contributions, such as staff time, instrument use, and work space, were also provided to TDEA-funded projects by organizations external to ESH Division

  10. 76 FR 59170 - Hartford Financial Services, Inc., Corporate/EIT/CTO Database Management Division, Hartford, CT...

    Science.gov (United States)

    2011-09-23

    ... in activities related to the supply of financial services. Specifically, the workers provide information technology support for the firm's financial services such as insurance protection and investment... Department's findings that The Hartford Financial Services, Inc. does not produce an article within the...

  11. The sexual division of leadership in volunteer emergency medical service squads.

    Science.gov (United States)

    Thompson, A M

    1995-01-01

    This article reports on theoretical and empirical research that explored the hypothesis that there is a sexual division of leadership in volunteer emergency medical service (EMS) squads. This hypothesis was tested against survey data obtained from 216 current members of nine upstate New York volunteer EMS squads. Despite several mitigating characteristics of these organizations, and despite the lack of supporting statistical evidence at the aggregate level of officership, the research found statistically significant confirmation of sex bias in officer selection when leadership was disaggregated into line and staff officer positions. Medical qualifications and length of EMS squad membership were also included in the model as determinants of leadership experience. These results are discussed relative to the question of the sexual division of leadership in the overarching nonprofit and voluntary sector of the U.S. economy.

  12. Recent Developments in the Management of Cameco Corporation's Fuel Services Division Waste - 13144

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Thomas P. [Cameco Corporation, Port Hope, Ontario (Canada)

    2013-07-01

    Cameco Corporation is a world leader in uranium production. Headquartered in Saskatoon, Saskatchewan our operations provide 16% of the world uranium mine production and we have approximately 435 million pounds of proven and probable uranium reserves. Cameco mining operations are located in Saskatchewan, Wyoming, Nebraska and Kazakhstan. Cameco is also a major supplier of uranium processing services required to produce fuel for the generation of clean energy. These operations are based in Blind River, Cobourg and Port Hope, Ontario and are collectively referred to as the Fuel Services Division. The Fuel Services Division produces uranium trioxide from uranium ore concentrate at the Blind River Refinery. Cameco produces uranium hexafluoride and uranium dioxide at the Port Hope Conversion Facility. Cameco operates a fuel manufacturing facility in Port Hope, Ontario and a metal fabrication facility located in Cobourg, Ontario. The company manufactures fuel bundles utilized in the Candu reactors. Cameco's Fuel Services Division produces several types of low-level radioactively contaminated wastes. Internal processing capabilities at both the Blind River Refinery and Port Hope Conversion Facility are extensive and allow for the recycling of several types of waste. Notwithstanding these capabilities there are certain wastes that are not amenable to the internal processing capabilities and must be disposed of appropriately. Disposal options for low-level radioactively contaminated wastes in Canada are limited primarily due to cost considerations. In recent years, Cameco has started to ship marginally contaminated wastes (<500 ppm uranium) to the United States for disposal in an appropriate landfill. The landfill is owned by US Ecology Incorporated and is located near Grand View, Idaho 70 miles southeast of Boise in the Owyhee Desert. The facility treats and disposes hazardous waste, non-hazardous industrial waste and low-activity radioactive material. The site

  13. Recent Developments in the Management of Cameco Corporation's Fuel Services Division Waste - 13144

    International Nuclear Information System (INIS)

    Smith, Thomas P.

    2013-01-01

    Cameco Corporation is a world leader in uranium production. Headquartered in Saskatoon, Saskatchewan our operations provide 16% of the world uranium mine production and we have approximately 435 million pounds of proven and probable uranium reserves. Cameco mining operations are located in Saskatchewan, Wyoming, Nebraska and Kazakhstan. Cameco is also a major supplier of uranium processing services required to produce fuel for the generation of clean energy. These operations are based in Blind River, Cobourg and Port Hope, Ontario and are collectively referred to as the Fuel Services Division. The Fuel Services Division produces uranium trioxide from uranium ore concentrate at the Blind River Refinery. Cameco produces uranium hexafluoride and uranium dioxide at the Port Hope Conversion Facility. Cameco operates a fuel manufacturing facility in Port Hope, Ontario and a metal fabrication facility located in Cobourg, Ontario. The company manufactures fuel bundles utilized in the Candu reactors. Cameco's Fuel Services Division produces several types of low-level radioactively contaminated wastes. Internal processing capabilities at both the Blind River Refinery and Port Hope Conversion Facility are extensive and allow for the recycling of several types of waste. Notwithstanding these capabilities there are certain wastes that are not amenable to the internal processing capabilities and must be disposed of appropriately. Disposal options for low-level radioactively contaminated wastes in Canada are limited primarily due to cost considerations. In recent years, Cameco has started to ship marginally contaminated wastes (<500 ppm uranium) to the United States for disposal in an appropriate landfill. The landfill is owned by US Ecology Incorporated and is located near Grand View, Idaho 70 miles southeast of Boise in the Owyhee Desert. The facility treats and disposes hazardous waste, non-hazardous industrial waste and low-activity radioactive material. The site's arid

  14. 78 FR 53194 - Advisory Group to the Internal Revenue Service Tax Exempt and Government Entities Division (TE/GE...

    Science.gov (United States)

    2013-08-28

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Advisory Group to the Internal Revenue Service Tax Exempt and Government Entities Division (TE/GE); Meeting AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice. SUMMARY: The Advisory Committee on Tax Exempt and Government Entities (ACT) will...

  15. Advances in Robotic Servicing Technology Development

    Science.gov (United States)

    Gefke, Gardell G.; Janas, Alex; Pellegrino, Joseph; Sammons, Matthew; Reed, Benjamin

    2015-01-01

    NASA's Satellite Servicing Capabilities Office (SSCO) has matured robotic and automation technologies applicable to in-space robotic servicing and robotic exploration over the last six years. This paper presents the progress of technology development activities at the Goddard Space Flight Center Servicing Technology Center and on the ISS, with an emphasis on those occurring in the past year. Highlighted advancements are design reference mission analysis for servicing in low Earth orbit (LEO) and asteroid redirection; delivery of the engineering development unit of the NASA Servicing Arm; an update on International Space Station Robotic Refueling Mission; and status of a comprehensive ground-based space robot technology demonstration expanding in-space robotic servicing capabilities beginning fall 2015.

  16. Interface control document between Analytical Services and Solid Waste Disposal Division

    International Nuclear Information System (INIS)

    Venetz, T.J.

    1995-01-01

    This interface control document (ICD) between Analytical Services and Solid Waste Disposal (SWD) establishes a baseline description of the support needed and the wastes that will require management as part of the interface between the two divisions. It is important that each division has a clear understanding of the other division's expectations regarding levels and type of support needed. This ICD deals with the waste sampling support needed by SWD and the waste generated by the specified analytical laboratories. The baseline description of wastes includes waste volumes, characteristics and shipping schedules, which will be used to plan the proper support requirements. The laboratories included in this document are 222-S Laboratory Facility, the Waste Sampling and Characterization Facility (WSCF) and the Chemical Engineering Laboratory. These three facilities provide support to the entire site and are not associated with one major program/facility. The laboratories associated with major facilities or programs such as Engineering/Environmental Development Laboratory at K Basins Operation are not within the scope of this document

  17. Annotated bibliography of Accelerator Technology Division research and development, 1978-1985

    International Nuclear Information System (INIS)

    Jameson, R.A.; Nicol, C.S.; Cochran, M.A.

    1985-09-01

    A bibliography is presented of unclassified published and in-house technical material written by members of the Accelerator Technology Division, Los Alamos National Laboratory, since its inception in January, 1978. The author and subject concordances in this report provide cross-reference to detailed citations kept in a computer database and a microfilm file of the documents. The citations include an abstract and other notes, and can be searched for key words and phrases

  18. Advances in steam generator service technology

    International Nuclear Information System (INIS)

    Perez, Ric

    1998-01-01

    The most recent advances in pressurized water reactor steam generator service technology are discussed in this article. Focus is on new developments in robotics, including the Remotely Operated Service Arm (ROSA III); repair and maintenance services on the SG secondary side; and the newest advances in SG inspection. These products and services save utility costs, shorten outage durations, enhance plant performance and safety, and reduce radiation exposure. (author)

  19. Chemical Technology Division: Progress report, January 1, 1987--June 30, 1988

    Energy Technology Data Exchange (ETDEWEB)

    1989-02-01

    This progress report summarizes the research and development efforts conducted in the Chemical Technology Division (Chem Tech) during the period January 1, 1987, to June 30, 1988. The following major areas are covered: waste management and environmental programs, radiochemical and reactor engineering programs, basic science and technology, Nuclear Regulatory Commission programs, and administrative resources and facilities. The Administrative Summary, an appendix, presents a comprehensive listing of publications, oral presentations, awards and recognitions, and patents of Chem Tech staff members during this period. A staffing level and financial summary and lists of seminars and Chem Tech consultants for the period are also included.

  20. Chemical Technology Division: Progress report, January 1, 1987--June 30, 1988

    International Nuclear Information System (INIS)

    1989-02-01

    This progress report summarizes the research and development efforts conducted in the Chemical Technology Division (Chem Tech) during the period January 1, 1987, to June 30, 1988. The following major areas are covered: waste management and environmental programs, radiochemical and reactor engineering programs, basic science and technology, Nuclear Regulatory Commission programs, and administrative resources and facilities. The Administrative Summary, an appendix, presents a comprehensive listing of publications, oral presentations, awards and recognitions, and patents of Chem Tech staff members during this period. A staffing level and financial summary and lists of seminars and Chem Tech consultants for the period are also included

  1. Advanced location-based technologies and services

    CERN Document Server

    Karimi, Hassan A

    2013-01-01

    Due to the rapid increase in the number of mobile device users worldwide, location-based services (LBSs) have become pervasive, and the demand for them will continue to grow. Exploring recent changes in the technology and its uses, Advanced Location-Based Technologies and Services takes an in-depth look at new and existing technologies, techniques, applications, and opportunities. Under the editorial guidance of Hassan Karimi, with contributions from experts in the field, the book examines the breadth and depth of advanced LBS technologies and techniques. The book provides up-to-date informati

  2. Technology Development, Evaluation, and Application (TDEA) FY 1998 Progress Report Environment, Safety, and Health (ESH) Division

    Energy Technology Data Exchange (ETDEWEB)

    Larry G. Hoffman; Kenneth Alvar; Thomas Buhl; Bruce Erdal; Philip Fresquez; Elizabeth Foltyn; Wayne Hansen; Bruce Reinert

    1999-06-01

    This progress report presents the results of 10 projects funded ($504K) in FY98 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division. Nine projects are new for this year; two projects were completed in their third and final TDEA-funded year. As a result of their TDEA-funded projects, investigators have published 19 papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplemental funds and in-kind contributions, such as staff time, instrument use, and work space were also provided to the TDEA-funded projects by organizations external to ESH Division. Products generated from the projects funded in FY98 included a new extremity dosimeter that replaced the previously used finger-ring dosimeters, a light and easy-to-use detector to measure energy deposited by neutron interactions, and a device that will allow workers to determine the severity of a hazard.

  3. Self Service Technologies: A Cause of Unemployment

    Directory of Open Access Journals (Sweden)

    Otekhile Cathy-Austin

    2016-06-01

    Full Text Available The self-service technologies (SSTs are fast changing the conventional way of transacting business by business organisations. The rapid innovation of self-service technologies and its adoption and usages in all facets of human systems is acclaimed to be fast rendering low skilled workers jobless. The major sectors of the economy in advanced economies have reached their peaks and can no longer provide new employment due to an increase in the productivity growth rate as a result of technology advances. These SSTs have in no small measure brought about an increase in productivity growth rate, cost reduction and anincrease in the speed of service delivery to customers. This paper examines if self-service technologies truly are the cause of persistent unemployment through a study of the long term metamorphosis of the major economic sectors in advanced economies. This study revealed that the SSTs presents both risks and opportunities.

  4. Developing Pre-service Teachers' Technology Integration ...

    African Journals Online (AJOL)

    Developing Pre-service Teachers' Technology Integration Competencies in Science and Mathematics Teaching: Experiences from Tanzania and Uganda. ... This study investigated the ICT integration practices in pre-service teacher education in the School of Education at Makerere University (College of Education and ...

  5. Advances in steam generator service technology

    International Nuclear Information System (INIS)

    Nair, B. R.; Bastin, J. J.

    1997-01-01

    This paper will discuss the most recent and innovative advances in the areas of pressurized water reactor (PWR) steam generator service technology. The paper will include detail of new products such as the Remotely Operated Service Arm (ROSA-III), laser welded sleeving, and laser welded Direct Tube Repair (DTR) - products and services that save utility costs, shorten outage durations, enhance plant performance and safety, and reduce radiation exposure. (author)

  6. Emergency Medical Service (EMS): Rotorcraft Technology Workshop

    Science.gov (United States)

    Bauchspies, J. S.; Adams, R. J.

    1981-01-01

    A lead organization on the national level should be designated to establish concepts, locations, and the number of shock trauma air medical services. Medical specialists desire a vehicle which incorporates advances in medical technology trends in health care. Key technology needs for the emergency medical services helicopter of the future include the riding quality of fixed wing aircraft (reduced noise and vibration), no tail rotor, small rotor, small rotor diameter, improved visibility, crashworthy vehicle, IFR capability, more affordability high reliability, fuel efficient, and specialized cabins to hold medical/diagnostic and communications equipment. Approaches to a national emergency medical service are discussed.

  7. Chemical Technology Division progress report for the period April 1, 1985 to December 31, 1986

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    This progress report summarizes the research and development efforts conducted in the Chemical Technology Division (Chem Tech) during the period April 1, 1985, through December 31, 1986. The following major areas are covered in the discussion: nuclear and chemical waste management, environmental control technology, basic science and technology, biotechnology research, transuranium-element processing, Nuclear Regulatory Commission programs, radioactive materials production, computer/engineering applications, fission energy, environmental cleanup projects, and various other work activities. As an appendix, the Administrative Summary presents a comprehensive compilation of publications, oral presentations, awards and recognitions, and patents of Chem Tech staff members during this report period. An organization chart, a staffing level and financial summary, and lists of seminars and Chem Tech consultants for the period are also included to provide additional information. 78 figs., 40 tabs.

  8. Chemical Technology Division progress report for the period April 1, 1985 to December 31, 1986

    International Nuclear Information System (INIS)

    1987-08-01

    This progress report summarizes the research and development efforts conducted in the Chemical Technology Division (Chem Tech) during the period April 1, 1985, through December 31, 1986. The following major areas are covered in the discussion: nuclear and chemical waste management, environmental control technology, basic science and technology, biotechnology research, transuranium-element processing, Nuclear Regulatory Commission programs, radioactive materials production, computer/engineering applications, fission energy, environmental cleanup projects, and various other work activities. As an appendix, the Administrative Summary presents a comprehensive compilation of publications, oral presentations, awards and recognitions, and patents of Chem Tech staff members during this report period. An organization chart, a staffing level and financial summary, and lists of seminars and Chem Tech consultants for the period are also included to provide additional information. 78 figs., 40 tabs

  9. Chemical Technology Division progress report, October 1, 1989--June 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    This progress report reviews the mission of the Chemical Technology Division (Chem Tech) and presents a summary of organizational structure, programmatic sponsors, and funding levels for the period October 1, 1988, through June 30, 1991. The report also summarizes the missions and activities of organizations within Chem Tech for the reporting period. Specific projects performed within Chem Tech`s energy research programs, waste and environmental programs, and radiochemical processing programs are highlighted. Other information regarding publications, patents, awards, and conferences organized by Chem Tech staff is also included.

  10. Chemical Technology Division progress report, October 1, 1989--June 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    This progress report reviews the mission of the Chemical Technology Division (Chem Tech) and presents a summary of organizational structure, programmatic sponsors, and funding levels for the period October 1, 1988, through June 30, 1991. The report also summarizes the missions and activities of organizations within Chem Tech for the reporting period. Specific projects performed within Chem Tech's energy research programs, waste and environmental programs, and radiochemical processing programs are highlighted. Other information regarding publications, patents, awards, and conferences organized by Chem Tech staff is also included.

  11. The progress report of the Instrumentation and Technological Electronical Division, for 1987

    International Nuclear Information System (INIS)

    1988-05-01

    The 1987 activity report of the CEA Instrumentation and Technological Electronic Division (ITED), is presented. The ITED fields of interest include nuclear, space, health, defense and civil domains. The research development and perspectives are summarized. Concerning materials and components the following research programs are included: silicon integrated circuits, silicon on isolator, common experimental laboratory, mass memory, lasers, photodetection, flat screens, and sensors. In the field of instrumentations and systems, the retained research guidelines are focused on: medical and biological instrumentation, the environment, the nuclear domain. Moreover, the research fields of physics, artificial intelligence and software, production, robots, architecture and integration are also included [fr

  12. IFLA General Conference, 1986. Special Libraries Division. Section: Science and Technology Libraries. Papers.

    Science.gov (United States)

    International Federation of Library Associations and Institutions, The Hague (Netherlands).

    Papers on science and technology libraries which were presented at the 1986 International Federation of Library Associations (IFLA) conference include: (1) "Online Information Service of the Japan Information Center of Science and Technology" (Ryuko Igarashi, Japan); (2) "A View from the Chip--The Influence of Information…

  13. On the Efficient Broadcasting of Heterogeneous Services over Band-Limited Channels: Unequal Power Allocation for Wavelet Packet Division Multiplexing

    Directory of Open Access Journals (Sweden)

    Maurizio Murroni

    2008-01-01

    Full Text Available Multiple transmission of heterogeneous services is a central aspect of broadcasting technology. Often, in this framework, the design of efficient communication systems is complicated by stringent bandwidth constraint. In wavelet packet division multiplexing (WPDM, the message signals are waveform coded onto wavelet packet basis functions. The overlapping nature of such waveforms in both time and frequency allows improving the performance over the commonly used FDM and TDM schemes, while their orthogonality properties permit to extract the message signals by a simple correlator receiver. Furthermore, the scalable structure of WPDM makes it suitable for broadcasting heterogeneous services. This work investigates unequal error protection (UEP of data which exhibit different sensitivities to channel errors to improve the performance of WPDM for transmission over band-limited channels. To cope with bandwidth constraint, an appropriate distribution of power among waveforms is proposed which is driven by the channel error sensitivities of the carried message signals in case of Gaussian noise. We address this problem by means of the genetic algorithms (GAs, which allow flexible suboptimal solution with reduced complexity. The mean square error (MSE between the original and the decoded message, which has a strong correlation with subjective perception, is used as an optimization criterion.

  14. 76 FR 20045 - The Ubs Group, a Division Of Ubs Ag, Also Known as Ubs Financial Services, Inc. and/or Ubs-Glb...

    Science.gov (United States)

    2011-04-11

    ... Division Of Ubs Ag, Also Known as Ubs Financial Services, Inc. and/or Ubs-Glb (Americas), Inc., Formerly... UBS AG, also known as UBS Financial Services, Inc., and/or UBS-GLB (Americas), Inc., Corporate Center... The UBS Group, a division of UBS AG, also known as UBS Financial Services, Inc., and/or UBS-GLB...

  15. General service and child immunization-specific readiness assessment of healthcare facilities in two selected divisions in Bangladesh.

    Science.gov (United States)

    Shawon, Md Shajedur Rahman; Adhikary, Gourab; Ali, Md Wazed; Shamsuzzaman, Md; Ahmed, Shahabuddin; Alam, Nurul; Shackelford, Katya A; Woldeab, Alexander; Lim, Stephen S; Levine, Aubrey; Gakidou, Emmanuela; Uddin, Md Jasim

    2018-01-25

    Service readiness of health facilities is an integral part of providing comprehensive quality healthcare to the community. Comprehensive assessment of general and service-specific (i.e. child immunization) readiness will help to identify the bottlenecks in healthcare service delivery and gaps in equitable service provision. Assessing healthcare facilities readiness also helps in optimal policymaking and resource allocation. A health facility survey was conducted between March 2015 and December 2015 in two purposively selected divisions in Bangladesh; i.e. Rajshahi division (high performing) and Sylhet division (low performing). A total of 123 health facilities were randomly selected from different levels of service, both public and private, with variation in sizes and patient loads from the list of facilities. Data on various aspects of healthcare facility were collected by interviewing key personnel. General service and child immunization specific service readiness were assessed using the Service Availability and Readiness Assessment (SARA) manual developed by World Health Organization (WHO). The analyses were stratified by division and level of healthcare facilities. The general service readiness index for pharmacies, community clinics, primary care facilities and higher care facilities were 40.6%, 60.5%, 59.8% and 69.5%, respectively in Rajshahi division and 44.3%, 57.8%, 57.5% and 73.4%, respectively in Sylhet division. Facilities at all levels had the highest scores for basic equipment (ranged between 51.7% and 93.7%) and the lowest scores for diagnostic capacity (ranged between 0.0% and 53.7%). Though facilities with vaccine storage capacity had very high levels of service readiness for child immunization, facilities without vaccine storage capacity lacked availability of many tracer items. Regarding readiness for newly introduced pneumococcal conjugate vaccine (PCV) and inactivated polio vaccine (IPV), most of the surveyed facilities reported lack of

  16. Fraction Multiplication and Division Word Problems Posed by Different Years of Pre-Service Elementary Mathematics Teachers

    Directory of Open Access Journals (Sweden)

    Tuba Aydogdu Iskenderoglu

    2018-04-01

    Full Text Available It is important for pre-service teachers to know the conceptual difficulties they have experienced regarding the concepts of multiplication and division in fractions and problem posing is a way to learn these conceptual difficulties. Problem posing is a synthetic activity that fundamentally has multiple answers. The purpose of this study is to analyze the multiplication and division of fractions problems posed by pre-service elementary mathematics teachers and to investigate how the problems posed change according to the year of study the pre-service teachers are in. The study employed developmental research methods. A total of 213 pre-service teachers enrolled in different years of the Elementary Mathematics Teaching program at a state university in Turkey took part in the study. The “Problem Posing Test” was used as the data collecting tool. In this test, there are 3 multiplication and 3 division operations. The data were analyzed using qualitative descriptive analysis. The findings suggest that, regardless of the year, pre-service teachers had more conceptual difficulties in problem posing about the division of fractions than in problem posing about the multiplication of fractions.

  17. AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, G.; Bair, K.; Ross, J. [eds.

    1994-03-01

    The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listing of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.

  18. Distributed MIMO chaotic radar based on wavelength-division multiplexing technology.

    Science.gov (United States)

    Yao, Tingfeng; Zhu, Dan; Ben, De; Pan, Shilong

    2015-04-15

    A distributed multiple-input multiple-output chaotic radar based on wavelength-division multiplexing technology (WDM) is proposed and demonstrated. The wideband quasi-orthogonal chaotic signals generated by different optoelectronic oscillators (OEOs) are emitted by separated antennas to gain spatial diversity against the fluctuation of a target's radar cross section and enhance the detection capability. The received signals collected by the receive antennas and the reference signals from the OEOs are delivered to the central station for joint processing by exploiting WDM technology. The centralized signal processing avoids precise time synchronization of the distributed system and greatly simplifies the remote units, which improves the localization accuracy of the entire system. A proof-of-concept experiment for two-dimensional localization of a metal target is demonstrated. The maximum position error is less than 6.5 cm.

  19. Product with service, technology with business model

    DEFF Research Database (Denmark)

    Sakao, Tomohiko; McAloone, Tim C.

    2011-01-01

    Looking back over the last decade, the importance of an expanded understanding of engineering design has been shared within the engineering design community. Presented concepts and methods to support such expansion include Functional Product Development, Service Engineering, and Product/Service-S...... promising concept beyond PSS design; via an integrated development of technology and business model. This can be of particular interest for further research, especially due to its high freedom for designers....

  20. Social networking services: technologies and applications

    OpenAIRE

    Puzyrnyy, Oleksandr

    2011-01-01

    Puzyrnyy, Oleksandr. 2011. Social networking services: technologies and applications. Bachelor's Thesis. Kemi-Tornio University of Applied Sciences. Business and Culture. Pages 52. The aim of this thesis is to describe the concept of social networking, its technological base, business opportunities and future perspectives. The study discovers how social networks are made and which different purposes they might have. In addition, social networking is viewed as a part of business strategy o...

  1. Report of the Technology Service - Annex B

    International Nuclear Information System (INIS)

    Martinc, R.; Cupac, S.; Vukadin, Z.; Stosic, T.

    1987-01-01

    This report describes the organisational structure of the technology service and its activities and tasks: routine control of reactor parameters and cooperation with the reactor users; development of methodology of reactor control and its application; control of heavy water and gas system operation; dosimetry measurements of contamination in the reactor building; technical aspects of radiation protection; decontamination and accident analysis [sr

  2. 78 FR 32462 - Wyatt Virgin Islands (V.I.), Inc., a Division of Wyatt Field Service Company, Working On-Site at...

    Science.gov (United States)

    2013-05-30

    ... the subject worker group was established to exclusively work at the HOVENSA refinery plant in the U.S....), Inc., a Division of Wyatt Field Service Company, Working On-Site at Hovensa, LLC Oil Refinery... (V.I.), Inc., a division of Wyatt Field Service Company, working on-site at HOVENSA, LLC Oil Refinery...

  3. Analysis of e-commerce transaction system’s division of labor based on essential services quantity

    Directory of Open Access Journals (Sweden)

    Li Wang

    2017-09-01

    Full Text Available Purpose – The division of labor of e-commerce transaction system is an important research topic. However, there is a certain disparity between the current mainstream research model and the reality, which leads to a biased result. This paper aims to find the effects of transaction efficiency on the evolution of e-commerce transaction system’s division of labor and the relationships between the results and other parameters. Design/methodology/approach – This paper puts forward a definition of transaction efficiency based on transaction services and establishes a model of middleman’s specialized production decision of transaction services on this basis. Findings – The research results show that the transaction efficiency plays an important role on the change of middlemen’s division of labor level. The degree of economic specialization, price of commodities and transaction services and other associated factors also affect middlemen’s division of labor. Originality/value – This paper is of great significance for evaluating the development level and forecast the development direction of e-commerce.

  4. Progress report for 1975-1977 of the Biochemistry and Food Technology Division

    International Nuclear Information System (INIS)

    1978-01-01

    Research and development work carried out during the period 1975-77 in the Biochemistry and Food Technology Division of the Bhabha Atomic Research Centre, is reported. In addition to the studies on macromolecular aspects of structure and function of chemical components e.g. proteins and enzymes of living systems and food microbiology, major studies relate to: (1) safe storage of wheat irradiated for disinfestation, (2) compositional changes in wheat exposed to high dose of radiation, (3) sprout inhibition of irradiated potatoes during storage under tropical conditions, (4) induction of phenylalanine ammonium lyase in irradiated potatoes, (5) preservation of mangoes and bananas by heat-radiation combination, (6) extension of shelf-life of fish by radurization, (7) wholesomeness of irradiated fish and (8) genetic toxicological evaluation of irradiated foods. (M.G.B.)

  5. KNF's fuel service technologies and experiences

    International Nuclear Information System (INIS)

    Shin, Jung Cheol; Kwon, Jung Tack; Kim, Jaeik; Park, Jong Youl; Kim, Yong Chan

    2009-01-01

    In Korea, since 1978, the commercial nuclear power plant was operated. After 10 years, from 1988, the nuclear fuel was produced by KNF (Korea Nuclear Fuel). The Fuel Service Team was established at KNF in 1995. Through the technical self reliance periods in cooperate with advanced foreign companies for 5 years, KNF has started to carry out fuel service activities onsite in domestic nuclear power plants. By ceaseless improving and advancing our own methodologies, after that, KNF is able to provide the most safe and reliable fuel repair services and poolside examinations including the root cause analysis of failed fuels. Recently, KNF developed the fuel cleaning system using ultrasonic technique for crud removal, and the CANDU fuel sipping system to detect a failed fuel bundle in PHWR. In this paper, all of KNF's fuel service technologies are briefly described, and the gained experience in shown

  6. Technology Awareness and Farmers Perception in Adoption of Wheat Production Technologies: Case Study in Njoro and Rongai Divisions

    International Nuclear Information System (INIS)

    Ndiema, A.C.

    2002-01-01

    Wheat is the second most important cereal crop in Kenya but its production has not been able to meet high demand, since production is only fifty percent. The shortfall is supplemented by importation. The purpose of this study was to assess and describe farmers' perception on adoption of wheat production technologies in Njoro and Rongai divisions. One hundred and fifty (150) wheat farmers were randomly selected using stratified proportional random sampling technique. The data was analysed using descriptive and inferential statistics. farmers perception in wheat production is favourable with 80.2% agreeing that it access to credits by farmers. This was only possible to 7.3% of the farmers. above 90% of the farmers in the two divisions exist. Farmers' perception for small-scale 3.25% as higher than 2.75% for large-scale wheat farmers with t-test-2.21 at α=0.05 for pest and disease control.s Education level and farm size significantly affected adoption, while gender and age were not significant

  7. USE OF MOBILE TECHNOLOGY IN BANKING SERVICES

    Directory of Open Access Journals (Sweden)

    ALIN ISAC

    2013-12-01

    Full Text Available Technology and applications of mobile phones offer many opportunities for businesses, they also presenting a continuous development and new challenges. Although this service is currently viewed with reluctance by customers, banks need to overcome this drawback and understand how this service can be combined with other alternative channels such as social media, to create value for customers. In this paper I presented information about present and perspectives in mobile applications industry, what can a mobile application do in banking, banking mobile applications in Romania, mobile banking applications worldwide.

  8. Electric technology in the food service industry; Les technologies electriques dans les services alimentaires

    Energy Technology Data Exchange (ETDEWEB)

    Labonte, A. [Hydro-Quebec, Montreal, PQ (Canada)

    1997-04-01

    Many innovative technologies in the food service industry have been made through the use of electricity as a source of energy. Electricity made it possible to improve the productivity and profitability of the food industry. Some of these technologies include: (1) cooking by induction, which is based on the principle of magnetic fields, (2) combined convection ovens which accelerate thermal exchange, and (3) electric fryers. The advantages of each technology were described. The environmental advantage of using electricity as an energy source in the food service industry was also discussed.

  9. Progress Report for the Chemical and Energy Research Section of the Chemical Technology Division: July-December 1998

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R.T.

    1999-06-01

    This report summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during the period July-December 1998. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications.

  10. Quarterly Progress Report for the Chemical and Energy Research Section of the Chemical Technology Division: April-June 1998

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R.T.

    1999-04-01

    This report summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during th eperiod April-June 1998. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications.

  11. Assistive Technology: Use and Service Delivery

    Directory of Open Access Journals (Sweden)

    Roya Ghasemzadeh

    2010-04-01

    Full Text Available As individuals with long-term disabilities and other older adults face declines in health and function, there is a greater need for assistive technology (AT or assistive devices and environmental interventions (EI to help them maintain their independence and community participation. These aids can help older adults and individuals with disabilities function in work, home, recreational, and other community settings as they encounter age related or disability related changes. Assistive Technology refers to products, devices or equipment that are used to maintain, increase or improve the functional capabilities of people with disabilities. A thorough assessment of the individual’s preferences and needs must be conducted before an assistive device is obtained. If one type of device is inadequate to meet an individual’s needs, it should not be assumed that there are no viable alternatives. Individuals’ use of AT and the type of technology used may change over time or as they age. Low-tech aids, such as canes or walkers, or high-tech aids, such as manual or power wheelchairs or scooters, are used to help individuals achieve mobility. Assistive Technologies to aid in communication currently range from low-tech devices such as books to high-tech, augmentative communication devices, which are computers. Computer technology can help individuals become more independent and can enhance their ability to overcome a wide range of limitations. Accessibility can involve more than architectural structure. AT for use in the environment can also increase individuals’ ability to function within their environment. Advancements in AT will occur in the technology itself, the services associated with the technology, and in the government policies and programs relative to AT. There will more widespread use of universal design, with less special-purpose AT required.

  12. Chemical Technology Division Comprehensive Self-Assessment and Upgrade Program (CSAUP). Performance Objectives and Criteria

    International Nuclear Information System (INIS)

    1990-05-01

    The U.S. Department of Energy (DOE) has placed strong emphasis on a new way of doing business patterned on the lessons learned in the nuclear power industry after the accident at Three Mile Island Unit 2. The new way relies on strict adherence to policies and procedures, a greatly expanded training program, and much more rigor and formality in operations. Another key element is more visible oversight by upper management and auditability by DOR Although the Chemical Technology Division (Chem Tech) has functioned in a safe manner since its beginning, the policies and methods of the past are no longer appropriate. Therefore, in accordance with these directives, Chem Tech is improving its operational performance by making a transition to greater formality in the observance of policies and procedures and a more deliberate consideration of the interrelationships between organizations at ORNL. This transition to formality is vitally important because both our staff and our facilities are changing with time. For example, some of the inventors and developers of the processes and facilities in use are now ''passing the torch'' to the next generation of Chem Tech staff. Our faculties have also served us well for many years, but the newest of these are now over 20 years old. All have increasing needs of refurbishment and repair, and some of the older ones need to be replaced. The Comprehensive Self-Assessment and Upgrade Program (CSAUP) has been patterned on a similar activity performed at the High Flux Isotope Reactor. Using the Draft DOE Performance Objectives and Criteria for Technical Safety Appraisals (May 1987) as a starting point, it was determined that 14 functional areas for evaluation listed in the report were suitable for Chem Tech use. An additional 5 functional areas were added for completeness since Chem Tech has a broader set of missions than a reactor facility. The Performance Objectives and Criteria (POC) for each functional area in the DOE report were

  13. Source Taxation of Technological Services in Finnish Tax Treaties

    OpenAIRE

    Kiviranta, Tuomas

    2016-01-01

    In this study, I analyze the various means of source taxation of technological and other services permitted by Finnish double taxation conventions and the future of source taxation of technological and other services. I attempt to shed light on the various means of source taxation of technological services permitted by Finnish tax treaties and by tax treaties also more generally. I analyze 1) the taxation of technological services in the source country as the profits of a permanent establishm...

  14. Report of the Technology Service - Annex B

    International Nuclear Information System (INIS)

    Martinc, R.; Cupac, S.; Vukadin, Z.; Stosic, T.; Sotic, O.

    1986-01-01

    This report describes the organisational structure of the technology service and its activities and tasks: routine control of reactor parameters and cooperation with the reactor users; development of methodology of reactor control and its application; control of heavy water and gas system operation; dosimetry measurements of contamination in the reactor building; technical aspects of radiation protection; decontamination and accident analysis. Separate chapter describes building of the reactor experimental loop for irradiation of fuel elements and construction materials, which will be placed in the central experimental channel VK-5 [sr

  15. Comparison of Responses on the 1994 Biennial Student Survey by the Consumer and Hospitality Services Division and Overall Students of the Milwaukee Area Technical College.

    Science.gov (United States)

    Advincula-Carpenter, Marietta M.

    To gather curriculum planning information, the Research, Planning and Development Division of Milwaukee Area Technical College (MATC) conducts student surveys biennially. Responses of 579 MATC students enrolled in consumer and hospitality services division (CHSD) programs to the 1994 survey were compared with those of the 5,071 students…

  16. 48 CFR 39.104 - Information technology services.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Information technology... SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY General 39.104 Information technology services. When acquiring information technology services, solicitations must not describe any...

  17. Information Technology in Complex Health Services

    Science.gov (United States)

    Southon, Frank Charles Gray; Sauer, Chris; Dampney, Christopher Noel Grant (Kit)

    1997-01-01

    Abstract Objective: To identify impediments to the successful transfer and implementation of packaged information systems through large, divisionalized health services. Design: A case analysis of the failure of an implementation of a critical application in the Public Health System of the State of New South Wales, Australia, was carried out. This application had been proven in the United States environment. Measurements: Interviews involving over 60 staff at all levels of the service were undertaken by a team of three. The interviews were recorded and analyzed for key themes, and the results were shared and compared to enable a continuing critical assessment. Results: Two components of the transfer of the system were considered: the transfer from a different environment, and the diffusion throughout a large, divisionalized organization. The analyses were based on the Scott-Morton organizational fit framework. In relation to the first, it was found that there was a lack of fit in the business environments and strategies, organizational structures and strategy-structure pairing as well as the management process-roles pairing. The diffusion process experienced problems because of the lack of fit in the strategy-structure, strategy-structure-management processes, and strategy-structure-role relationships. Conclusion: The large-scale developments of integrated health services present great challenges to the efficient and reliable implementation of information technology, especially in large, divisionalized organizations. There is a need to take a more sophisticated approach to understanding the complexities of organizational factors than has traditionally been the case. PMID:9067877

  18. Does cadastral division of area-based ecosystem services obstruct comprehensive management?

    DEFF Research Database (Denmark)

    Vejre, H.; Vesterager, J. P.; Andersen, P. S.

    2015-01-01

    Management of ecological entities in agricultural landscapes is often challenged by a complex ownership structure governed by a cadastral system dictated by agricultural interests and historical land use practices. The cadastral division is suspected to obstruct the deliverance of ecosystem servi...

  19. Analytical capabilities and services of Lawrence Livermore Laboratory's General Chemistry Division

    International Nuclear Information System (INIS)

    Gutmacher, R.; Crawford, R.

    1978-01-01

    This comprehensive guide to the analytical capabilities of Lawrence Livermore Laboratory's General Chemistry Division describes each analytical method in terms of its principle, field of application, and qualitative and quantitative uses. Also described are the state and quantity of sample required for analysis, processing time, available instrumentation, and responsible personnel

  20. WIRELESS TECHNOLOGIES for LOCATION-BASED SERVICES

    Directory of Open Access Journals (Sweden)

    Dewi Wirastuti

    2012-06-01

    Full Text Available This paper presents an overview of wireless technologies that support location-based services (LBS. Satellite and cellular networks have exploited their communication infrastructure to offer LBS. The rapid deployment of mobile broadband wireless networks has offered another appealing application area. Key to the realisation of LBS is an efficient and accurate positioning technique with various methods and offering different performance levels. So far, Global Positioning System (GPS has offered the best accuracy at a low cost but it is challenged by poor indoor coverage. With the rapid deployment of broadband wireless access ubiquitously, Mobile WiMAX (Worldwide Interoperability for Microwave Access is seen as a potential positioning option for LBS. Some key features of WiMAX, i.e., broadband benefit, high speed and large coverage area; it will be exploited to provide LBS.

  1. OCETA: services for environmental companies an technology developers

    Energy Technology Data Exchange (ETDEWEB)

    Buckley, A.; Ozdemir, B. [Ontario Centre for Environmental Technology Advancement, Toronto, ON (Canada)

    1995-12-31

    Services provided by OCETA (Ontario Centre for Environmental Technology Advancement) to Ontario-based developers of environmental technologies, were described. While OCETA is not a granting agency, it is prepared to provide seed funding, in combination with private and government funding for client projects, and is committed to sharing risks and rewards for successful commercialization. The agency is also in a position to provide technology services at agreed discounts and to maximize in-kind contributions in order to extend project funding. Other services that the agency is equipped to provide, are described. These include information services, technology demonstration and assessment, business services, funding identification and sourcing, marketing, partnerships, and export market development.

  2. Quarterly Progress Report for the Chemical and Energy Research Section of the Chemical Technology Division: January-March 1998

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R.T.

    1999-03-01

    This report summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during the period January-March 1998. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy driven technologies and advanced chemical separations for nuclear and waste applications. The report describes the various tasks performed within nine major areas of research: Hot Cell Operations, Process Chemistry and Thermodynamics, Molten Salt Reactor Experiment (MSRE) Remediation Studies, Chemistry Research, Biotechnology, Separations and Materials Synthesis, Fluid Structure and Properties, Biotechnology Research, and Molecular Studies.

  3. National Collegiate Athletic Association Division I Certified Athletic Trainers' Perceptions of the Benefits of Sport Psychology Services

    Science.gov (United States)

    Zakrajsek, Rebecca A.; Martin, Scott B.; Wrisberg, Craig A.

    2016-01-01

    Context:  Certified athletic trainers (ATs) are responsible for integrating relevant professionals into the rehabilitation team to assist with the holistic care of injured athletes. Objective:  To explore National Collegiate Athletic Association Division I (DI) ATs' experience with sport psychology consultants (SPCs), willingness to encourage athletes to use SPCs for injury rehabilitation, and perceptions of the benefits of sport psychology services. Design:  Quantitative study. Setting:  A Web-based survey was administered to a national sample of DI ATs. Patients or Other Participants:  A total of 659 (341 men, 318 women) ATs completed the survey. Main Outcome Measure(s):  Athletic trainers' experience with SPCs, willingness to encourage athletes to seek sport psychology services, and perceptions of the benefits of those services in injury-rehabilitation settings were self-reported using a rating scale that ranged from 1 (never or not at all) to 5 (definitely or extremely). Results:  Logistic regression revealed that the availability of SPCs, previous encouragement to athletes to seek sport psychology services, and previous positive interactions with SPCs predicted the ATs' willingness to encourage athletes to use these services (P psychology services might call on SPCs to complement their work with injured athletes. PMID:27159188

  4. 76 FR 5834 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

    Science.gov (United States)

    2011-02-02

    ... Machines Corporation, Global Technology Services Business Unit, Integrated Technology Services, Cost and..., applicable to workers of International Business Machines Corporation, Global Technology Services Business... engaged in activities related to support for the Global Technology Services Business Unit. The company...

  5. Dr Hiroshi Ikukawa Director Planning and Evaluation Division Science and Technology Policy Bureau Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan and Mr Robert Aymar signed an accord for the CERN.

    CERN Multimedia

    Claudia Marcelloni

    2007-01-01

    Dr Hiroshi Ikukawa Director Planning and Evaluation Division Science and Technology Policy Bureau Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan and Mr Robert Aymar signed an accord for the CERN.

  6. Nuclear Technology Division annual progress report for period ending June 30, 1974

    International Nuclear Information System (INIS)

    1975-01-01

    Abstracts of research projects are presented concerning nuclear properties, general reactor development and support, test reactor operations support, LOFT support, PBF support, FEFPL support, TRSP support, techniques and instrumentation, non-nuclear energy sources, and related activities of division personnel. (U.S.)

  7. Adaptive technologies for library and information services for ...

    African Journals Online (AJOL)

    Adaptive technologies for library and information services for physically challenged in special education schools of Kaduna State. ... special education schools because; these are genuine demand from adaptive technology users of the library.

  8. Language and technology literacy barriers to accessing government services

    CSIR Research Space (South Africa)

    Barnard, E

    2003-01-01

    Full Text Available of field experiments are done to gain an improved understanding of the extent to which citizens’ exposure to technology and home language affect their ability to access electronic services. These experiments will influence technology development...

  9. National Collegiate Athletic Association Division I Certified Athletic Trainers' Perceptions of the Benefits of Sport Psychology Services.

    Science.gov (United States)

    Zakrajsek, Rebecca A; Martin, Scott B; Wrisberg, Craig A

    2016-05-01

    Certified athletic trainers (ATs) are responsible for integrating relevant professionals into the rehabilitation team to assist with the holistic care of injured athletes. To explore National Collegiate Athletic Association Division I (DI) ATs' experience with sport psychology consultants (SPCs), willingness to encourage athletes to use SPCs for injury rehabilitation, and perceptions of the benefits of sport psychology services. Quantitative study. A Web-based survey was administered to a national sample of DI ATs. A total of 659 (341 men, 318 women) ATs completed the survey. Athletic trainers' experience with SPCs, willingness to encourage athletes to seek sport psychology services, and perceptions of the benefits of those services in injury-rehabilitation settings were self-reported using a rating scale that ranged from 1 (never or not at all) to 5 (definitely or extremely). Logistic regression revealed that the availability of SPCs, previous encouragement to athletes to seek sport psychology services, and previous positive interactions with SPCs predicted the ATs' willingness to encourage athletes to use these services (P sport and building confidence). Chi-square analyses indicated that female ATs' ratings of perceived benefits were higher (P ≤ .001) than those of male ATs, and the ratings of ATs who were likely to encourage the use of SPCs were higher (P ≤ .001) than those who were unlikely to encourage SPC service use. Athletic trainers in our study who had previous positive SPC experiences were most likely to use SPCs and their services during the injury-rehabilitation process. Possible implications are offered for how ATs interested in sport psychology services might call on SPCs to complement their work with injured athletes.

  10. Disrupting Faculty Service: Using Technology to Increase Academic Service Productivity

    Science.gov (United States)

    Burnett, Perry; Shemroske, Kenneth; Khayum, Mohammed

    2014-01-01

    Scholarly attention regarding faculty involvement has primarily focused on faculty opinions of shared governance and faculty influence on institutional decision-making. There has been limited attention given to academic service productivity and the effectiveness of traditional approaches toward the accomplishment of faculty service requirements.…

  11. 78 FR 67218 - Senior Executive Service; Legal Division Performance Review Board

    Science.gov (United States)

    2013-11-08

    ..., Benefits Tax Counsel; Himamauli Das, Assistant General Counsel (International Affairs); Margaret Depue... Revenue Service; Lee Kelley, Deputy Benefits Tax Counsel; Robert Neis, Associate Benefits Tax Counsel; Danielle Rolfes, International Tax Counsel; Daniel P. Shaver, Chief Counsel, United States Mint; Brian...

  12. 75 FR 26768 - Office of Clinical and Preventive Services: Division of Behavioral Health Domestic Violence...

    Science.gov (United States)

    2010-05-12

    ... points) Describe the program's prior history of implementing successful domestic violence services and/or... activities. This applies whether the delinquency is attributable to the failure of the grantee organization...

  13. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - U.S. POSTAL INSPECTION SERVICE FORENSIC & TECHNICAL SERVICES DIVISION - NATIONAL FORENSIC LABORATORY, DULLES, VIRGINIA

    Science.gov (United States)

    The United States Postal Service (USPS) in cooperation with EPA's National Risk Management Research Laboratory (NRMRL) is engaged in an effort to integrate waste prevention and recycling activities into the waste management programs at Postal facilities. This report describes the...

  14. Education Technology Services at Indiana University: A Case Study.

    Science.gov (United States)

    Bichelmeyer, B. A.; Hara, Noriko; Yi, Jessi; Dennen, Vanessa; Avers, Dale; Tzeng, Jeng-Yi

    1998-01-01

    This paper, based on a qualitative research study, describes the technology resources available in the Indiana University School of Education, explains the range of services provided by Education Technology Services (ETS), documents the organizational structure of ETS, and describes the key processes and culture of ETS. (Author/AEF)

  15. Technology Integration Support Levels for In-Service Teachers

    Science.gov (United States)

    Williams, Mable Evans

    2017-01-01

    In-service teachers across the globe are expected to integrate technology in their respective instructional content area. The purpose of this qualitative study was to explore the perceptions of in-service teachers concerning building-level support for technology integration. Participants in the study were asked to participate in semi-structured…

  16. Technology Acceptance among Pre-Service Teachers: Does Gender Matter?

    Science.gov (United States)

    Teo, Timothy; Fan, Xitao; Du, Jianxia

    2015-01-01

    This study examined possible gender differences in pre-service teachers' perceived acceptance of technology in their professional work under the framework of the technology acceptance model (TAM). Based on a sample of pre-service teachers, a series of progressively more stringent measurement invariance tests (configural, metric, and scalar…

  17. Student research activities in the Technology Assessments Section of the Health and Safety Research Division, Summer 1980

    Energy Technology Data Exchange (ETDEWEB)

    Chester, R.O.; Roberts, D.A.

    1981-08-01

    Reports summarizing activities of students assigned to the Technology Assessments Section of the Health and Safety Research Division for the summer 1980 are presented. Unless indicated otherwise, each report was written by the student whose work is being described. For each student, the student's supervisor, the name of the program under which the student was brought to ORNL, the academic level of the student, and the name of the ORNL project to which the student was assigned are tabulated. The reports are presented in alphabetical order of the students' last names.

  18. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1985. Volume 4

    International Nuclear Information System (INIS)

    1986-03-01

    The compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research, concentrates on achievements in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators and for non-destructive examination of primary system components. This report, covering research conducted during Fiscal Year 1985, is the fourth volume of the series of NUREG-0975, Compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering Technology

  19. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1984. Volume 3

    International Nuclear Information System (INIS)

    1985-04-01

    This compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research, concentrates on achievments in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators and for non-destructive examination of primary system components. This report, covering research conducted during Fiscal Year 1984, is the third volume of the series of NUREG-0975, compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering Technology

  20. Student research activities in the Technology Assessments Section of the Health and Safety Research Division, Summer 1980

    International Nuclear Information System (INIS)

    Chester, R.O.; Roberts, D.A.

    1981-08-01

    Reports summarizing activities of students assigned to the Technology Assessments Section of the Health and Safety Research Division for the summer 1980 are presented. Unless indicated otherwise, each report was written by the student whose work is being described. For each student, the student's supervisor, the name of the program under which the student was brought to ORNL, the academic level of the student, and the name of the ORNL project to which the student was assigned are tabulated. The reports are presented in alphabetical order of the students' last names

  1. Learning services-based technological ecosystems

    OpenAIRE

    García-Peñalvo, Francisco J.; Hernández-García, Ángel; Conde, Miguel Á; Fidalgo-Blanco, Ángel; Sein-Echaluce, María L.; Alier, Marc; Llorens Largo, Faraón; Iglesias-Pradas, Santiago

    2015-01-01

    The gap between technology and learning methods has two important implications: on the one hand, we should not expect the integration of technological advances into teaching to be an easy task; and there is a danger that mature educational technologies and methods might not give an adequate answer to the demands and needs of society, underusing their transforming potential to improve learning processes. This study discusses the need for a new technological environment supporting learning serv...

  2. The Technological Growth in eHealth Services

    Directory of Open Access Journals (Sweden)

    Shilpa Srivastava

    2015-01-01

    Full Text Available The infusion of information communication technology (ICT into health services is emerging as an active area of research. It has several advantages but perhaps the most important one is providing medical benefits to one and all irrespective of geographic boundaries in a cost effective manner, providing global expertise and holistic services, in a time bound manner. This paper provides a systematic review of technological growth in eHealth services. The present study reviews and analyzes the role of four important technologies, namely, satellite, internet, mobile, and cloud for providing health services.

  3. The Technological Growth in eHealth Services.

    Science.gov (United States)

    Srivastava, Shilpa; Pant, Millie; Abraham, Ajith; Agrawal, Namrata

    2015-01-01

    The infusion of information communication technology (ICT) into health services is emerging as an active area of research. It has several advantages but perhaps the most important one is providing medical benefits to one and all irrespective of geographic boundaries in a cost effective manner, providing global expertise and holistic services, in a time bound manner. This paper provides a systematic review of technological growth in eHealth services. The present study reviews and analyzes the role of four important technologies, namely, satellite, internet, mobile, and cloud for providing health services.

  4. The Technological Growth in eHealth Services

    Science.gov (United States)

    Srivastava, Shilpa; Pant, Millie; Abraham, Ajith; Agrawal, Namrata

    2015-01-01

    The infusion of information communication technology (ICT) into health services is emerging as an active area of research. It has several advantages but perhaps the most important one is providing medical benefits to one and all irrespective of geographic boundaries in a cost effective manner, providing global expertise and holistic services, in a time bound manner. This paper provides a systematic review of technological growth in eHealth services. The present study reviews and analyzes the role of four important technologies, namely, satellite, internet, mobile, and cloud for providing health services. PMID:26146515

  5. The Impact of In-Service Technology Training Programmes on Technology Teachers

    Science.gov (United States)

    Gumbo, Mishack; Makgato, Moses; Muller, Helene

    2012-01-01

    The aim of this paper is to assess the impact the Advanced Certificate in Education (ACE) in-service technology training program has on technology teachers' knowledge and understanding of technology. The training of technology teachers is an initiative toward teachers' professional development within the mathematics, science, and technology sphere…

  6. 76 FR 40713 - Office of Special Education and Rehabilitative Services; Technology and Media Services for...

    Science.gov (United States)

    2011-07-11

    ... DEPARTMENT OF EDUCATION Office of Special Education and Rehabilitative Services; Technology and Media Services for Individuals With Disabilities Program AGENCY: Department of Education. ACTION..., authorized under the Individuals with Disabilities Education Act. Through this notice, we are adding a...

  7. 76 FR 40712 - Office of Special Education and Rehabilitative Services; Technology and Media Services for...

    Science.gov (United States)

    2011-07-11

    ... DEPARTMENT OF EDUCATION Office of Special Education and Rehabilitative Services; Technology and Media Services for Individuals With Disabilities Program AGENCY: Department of Education. ACTION... published by the Department. Dated: July 6, 2011. Alexa Posny, Assistant Secretary for Special Education and...

  8. Improving Educational Outcomes by Providing Educational Services through Mobile Technology

    OpenAIRE

    Hosam Farouk El-Sofany

    2013-01-01

    The use of Computers, Networks, and Internet has successfully enabled educational institutions to provide their students and instructors with various online educational services. With the recent developments in M-learning and mobile technology, further possibilities are emerging to provide such services through mobile devices such as mobile phones and PDAs. By providing the educational services using wireless and mobile technologies, the educational institutions can potentially bring great co...

  9. Pre-Service Science and Mathematics Teachers' Thoughts about Technology

    Science.gov (United States)

    Aran, Özge Can; Derman, Ipek; Yagci, Esed

    2016-01-01

    This study aims to investigate pre-service teachers' opinions about the technology. In this respect, the opinions of pre-service science and mathematics teachers were taken. The study was carried out at a university, located in the capital of Turkey. The data were collected from 20 pre-service teachers in the department of secondary school science…

  10. Marketing Social Service Programs Using Political Campaign Technology.

    Science.gov (United States)

    Bynum, Peter

    1991-01-01

    Discusses how human services agencies can use strategies and information technologies similar to those used in political campaigns to identify needs and attitudes for social services campaigns. Marketing for social services programs is described, and the use of computers for a political campaign and for a teenage pregnancy program is compared.…

  11. What Do Information Technology Support Services Really Cost?

    Science.gov (United States)

    Leach, Karen; Smallen, David

    1998-01-01

    A study examined the cost of information-technology support services in higher education institutions. The report describes the project's origins and work to date and reports initial results in three areas: network services, desktop repair services, and administrative information systems, looking in each case at economies of scale, outsourcing…

  12. Exploring technology acceptance for mobile services

    Directory of Open Access Journals (Sweden)

    Kenny Phan

    2011-07-01

    Full Text Available Purpose: Mobile phone industries are no longer relying on voice services. It is predicted that data services are expected to be a remediation for the declining of average revenue per user (ARPU in telecommunication market. The purpose of this paper is to find the factors that influence the acceptance/adoption of mobile services.Design/methodology/approach: This paper utilizes quantitative method. Questionnaire were distributed to collect the data. The questionnaires are designed specifically to address the factors related to mobile services. Later on, this paper uses Analytical Hierarchical Process (AHP and Cluster analysis to identify the factors that influence the adoption of mobile services.Findings: The results show that ease of use and usefulness are top two factors that influence the adoption of mobile services.Research limitations/implications: The sample for the study is relatively small. For future research, the sample should be increased. The data collection should also look into different devices and operating system of mobile phones to find if there is any significant difference in adopting mobile services.Practical implications: This framework is expected to be able to help the mobile services provider to design better mobile services that can attract users to adopt them. Originality/value: This is the follow on research on the previous study that employed different method. This study is to confirm and support the findings from previous study.

  13. In-service crosstalk monitoring for dense space division multiplexed multi-core fiber transmission systems

    DEFF Research Database (Denmark)

    Mizuno, T.; Isoda, A.; Shibahara, K.

    2017-01-01

    We present in-service inter-core crosstalk monitoring for MCF transmission systems. We transmit 54-WDM PDM-16QAM signals over 111.6-km 32-core DSDM transmission line incorporating cladding-pumped 32-core MC-EYDFA, and demonstrate -30 dB crosstalk monitoring without affecting transmission...

  14. Technology Development, Evaluation, and Application (TDEA) FY 1995 progress report - Environmental, Safety, and Health (ESH) division

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, L.L.

    1996-09-01

    This report covers six months of effort, including startup time. Five projects were supported by the division: Pilot Program for the Risk-Based Surveillance of Lung Cancer in Los Alamos National Laboratory Workers, Optimization of Placement of Workplace Continuous Air Monitoring Instrumentation, A Polymeric Barrier Monitor to Protect Workers, Evaluation of a Real-Time Beryllium Detection Instrument and the Implications of Its Use, and High-Energy Dosimetry. A project summary for each is provided. An appendix to the report includes the 1995 Request for Proposals, Committee Members, Priority Technical Areas of Interest for FY95, Relative Prioritization and Weighting Factors, Format for Proposals, and Charter.

  15. Technology Development, Evaluation, and Application (TDEA) FY 1995 progress report - Environmental, Safety, and Health (ESH) division

    International Nuclear Information System (INIS)

    Andrews, L.L.

    1996-09-01

    This report covers six months of effort, including startup time. Five projects were supported by the division: Pilot Program for the Risk-Based Surveillance of Lung Cancer in Los Alamos National Laboratory Workers, Optimization of Placement of Workplace Continuous Air Monitoring Instrumentation, A Polymeric Barrier Monitor to Protect Workers, Evaluation of a Real-Time Beryllium Detection Instrument and the Implications of Its Use, and High-Energy Dosimetry. A project summary for each is provided. An appendix to the report includes the 1995 Request for Proposals, Committee Members, Priority Technical Areas of Interest for FY95, Relative Prioritization and Weighting Factors, Format for Proposals, and Charter

  16. From telemedicine technology to telemedicine services

    NARCIS (Netherlands)

    Vollenbroek-Hutten, Miriam Marie Rosé; Tabak, Monique; Kosterink, Stephanie; van Weering, Marit

    2015-01-01

    The aim of this study was to design and pilot test ICT-supported rehabilitation services across twelve health care institutions and four different diagnosis groups (i.e. acute hip, arthritis, cancer and chronic obstructive pulmonary disease) starting from a multimodal service platform that offers

  17. Growing a Technology Equipment Service in an Academic Library

    Science.gov (United States)

    Anderson, Sean; Weatherbee, Sue

    2012-01-01

    The 21st-century student is highly technological. In order to encourage and enable the technologically advanced students, the authors wanted to develop a technology equipment service in the library at Texas A&M University-Commerce. They had an idea of what they wanted to accomplish but were unsure of how to get started. They started a small…

  18. Quarterly progress report for the Chemical and Energy Research Section of the Chemical Technology Division: July--September 1997

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R.T.

    1998-07-01

    This report summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during the period July--September 1997. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications. The report describes the various tasks performed within nine major areas of research: Hot Cell Operations, Process Chemistry and Thermodynamics, Molten Salt Reactor Experiment (MSRE) Remediation Studies, Chemistry Research, Biotechnology, Separations and Materials Synthesis, Fluid Structure and Properties, Biotechnology Research, and Molecular Studies. The name of a technical contact is included with each task described, and readers are encouraged to contact these individuals if they need additional information.

  19. After-sales service to manufactured goods on technological basis

    Directory of Open Access Journals (Sweden)

    Miriam Borchardt

    2008-07-01

    Full Text Available This theoretical and exploratory paper aims to build a critical analysis on after-sales services, mainly regarded to manufactured goods on technological basis. The purpose of the research is to achieve some better understanding about the essential elements that are to be taken into account in conceiving such a service, after different approaches. After-sales service is a member of the service package and it can influence customer satisfaction. The studied issues can integrate policies to guiding firms in designing after-sales services. They are: definition of the service itself; strategic issues; the facilities and premises; and the operation management. We aim this theoretical research to be a pre-requisite to launch further empirical researches, mainly in the field of inter-organizational relationships. Key-words: service management; after-sales service; service operations; goods associated to services; inter-organizational relationships.

  20. Building technology services that address student needs.

    Science.gov (United States)

    Le Ber, Jeanne M; Lombardo, Nancy T; Wimmer, Erin

    2015-01-01

    A 16-question technology use survey was conducted to assess incoming health sciences students' knowledge of and interest in current technologies, and to identify student device and tool preferences. Survey questions were developed by colleagues at a peer institution and then edited to match this library's student population. Two years of student responses have been compiled, compared, and reviewed as a means for informing library decisions related to technology and resource purchases. Instruction and event programming have been revised to meet student preferences. Based on the number of students using Apple products, librarians are addressing the need to become more proficient with this platform.

  1. Redefining Requirements of Ancillary Services for Technology Agnostic Sources

    DEFF Research Database (Denmark)

    Bondy, Daniel Esteban Morales; MacDonald, Jason; Kara, Emre Can

    2018-01-01

    New sources for ancillary services are needed, yet the requirements for service provision in most countries are explicitly formulated for traditional generators. This leads to waste of the potential for new technologies to deliver ancillary services. In order to harness this potential, we propose...... to parameterize the requirements of ancillary services so that reserves can be built by combining the advantageous properties of different technologies. The proposal is exemplified through a laboratory test where it shown that the system needs can be covered through cheaper and smaller reserves....

  2. Outsourcing information communication technology services in ...

    African Journals Online (AJOL)

    Outsourcing is a management strategy that is gradually proving its worth in library ... such as cost cutting, knowledge and skills acquisition and economies of scale. ... Keywords: Information Communication Technology, Information Systems, ...

  3. Employing optical code division multiple access technology in the all fiber loop vibration sensor system

    Science.gov (United States)

    Tseng, Shin-Pin; Yen, Chih-Ta; Syu, Rong-Shun; Cheng, Hsu-Chih

    2013-12-01

    This study proposes a spectral amplitude coding-optical code division multiple access (SAC-OCDMA) framework to access the vibration frequency of a test object on the all fiber loop vibration sensor (AFLVS). Each user possesses an individual SAC, and fiber Bragg grating (FBG) encoders/decoders using multiple FBG arrays were adopted, providing excellent orthogonal properties in the frequency domain. The system also mitigates multiple access interference (MAI) among users. When an optical fiber is bent to a point exceeding the critical radius, the fiber loop sensor becomes sensitive to external physical parameters (e.g., temperature, strain, and vibration). The AFLVS involves placing a fiber loop with a specific radius on a designed vibration platform.

  4. Employees Technology Usage Adaptation Impact on Companies’ Logistics Service Performance

    Directory of Open Access Journals (Sweden)

    A. Zafer ACAR

    2018-01-01

    Full Text Available The information technology (IT capability of companies is one of the determinants of their competitive power. However, IT outputs depend on employees intentions to use them. As a technological investment Port automation systems are widely used in container terminals. Therefore behavioral intention in the usage of various IT applications is one of the important factors that may affect logistics service performance. This study aims to explore the employees' technology usage adaptation impact on the logistics service performance of ports. In this context, the behavioral intentions of employees who use port automation systems are investigated using the Technological Acceptance Model.

  5. Chemical Technology Division progress report, April 1, 1983-March 31, 1985

    International Nuclear Information System (INIS)

    1985-10-01

    The status of the following programs is reported: fission energy; nuclear and chemical waste management; environmental control technology; basic science and technology; biotechnology programs; transuranium-element processing; Nuclear Regulatory Commission programs; Consolidated Edison Uranium Solidification Project; radioactive materials production; computer 1 engineering applications; and miscellanous programs

  6. Chemical Technology Division progress report, April 1, 1983-March 31, 1985

    Energy Technology Data Exchange (ETDEWEB)

    1985-10-01

    The status of the following programs is reported: fission energy; nuclear and chemical waste management; environmental control technology; basic science and technology; biotechnology programs; transuranium-element processing; Nuclear Regulatory Commission programs; Consolidated Edison Uranium Solidification Project; radioactive materials production; computer 1 engineering applications; and miscellanous programs.

  7. Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

    International Nuclear Information System (INIS)

    Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G.

    2008-11-01

    This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X

  8. Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G

    2008-11-15

    This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X.

  9. 75 FR 20388 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

    Science.gov (United States)

    2010-04-19

    ... Machines Corporation, Global Technology Services Business Unit, Integrated Technology Services, Cost and... Technology Services Business Unit, Integrated Technology Services, Cost and Expense Team working from various... Technology Services Business Unit. The company reports that workers leased from Datrose, Inc., were employed...

  10. STUDY REGARDING THE MANAGEMENT OF LOCAL POLICEMAN CAREER WITHIN THE REŞIŢA LOCAL POLICE DIVISION PUBLIC SERVICE

    Directory of Open Access Journals (Sweden)

    GHERGHINA LILIANA

    2016-10-01

    Full Text Available The paper entitled Study regarding the Management of Local Policemen Career within the Reşiţa Local Police Division Public Service aims at highlighting the need for this public service in the Reşiţa municipality community, the importance of the public office in this context, of the public service, of the public servant with special statute and, last but not least, of the managerial act in the administration of this type of human resources, and implicitly this type of career. Starting from the theoretic identifications and their translation into the practice of the field chosen for research we could conclude that in the development of the local policemen career, a special role is played by the human resources management, especially the management of the career of this value-bearing resource. Our investigation was based on the opinion poll-type inquiry, the main instrument being the questionnaire conceived, administered and then valorised and interpreted. The conclusions generated by this research highlighted step by step, along the activities of the analysed human resources management and implicitly their career management, the actual positive or negative aspects and the fact that the management of human resources and implicitly of their career which, we scrutinised – that of police officer or policeman in short – assures with priority: the observance of the legislation specific to the investigated field, support for the development of the local policemen’s career, their prompt availability in due time, the knowledge and fulfilment of the tasks according to the job and position requirements, all this assures the understanding of the employees’ expectations, of the change of employees’ roles within the organisation depending on their experience and solves the conflicts among the employees. Nevertheless, we identified, in a less significant percentage , some cases of discontent and dissatisfaction, cases that could generate ideas for

  11. Future Directions for Building Services Technologies in Denmark

    DEFF Research Database (Denmark)

    Marsh, Rob

    2008-01-01

    strategies for the effective integration of building services, and by developing new industrialised solutions for building services. The paper is based on the current Danish situation, and is based on linking research on building services, user needs, building design and new industrial processes.  ......  The hypothesis of this paper is that industrial transformation in the Danish construction sector needs in the future to focus on integrating building services technologies into the buildings. This can be illustrated by analysing historical developments in building services usage, exploring design...

  12. Sustainability of University Technology Transfer: Mediating Effect of Inventor’s Technology Service

    Directory of Open Access Journals (Sweden)

    Fang Li

    2018-06-01

    Full Text Available Based on the perspective of knowledge transfer and the technology acceptance model (TAM, this paper constructs a university technology transfer sustainable development model that considers the inventor’s technology service from the perspective of the long-term cooperation of enterprise, and analyzes the mediating effect of the inventor’s technology service on university technology transfer sustainability. By using 270 questionnaires as survey data, it is found that the availability of an inventor’s technology service has a significant positive impact on the attitude tendency and practice tendency of enterprise long-term technological cooperation; enterprise technology absorption capacity and trust between a university and an enterprise also have significant influence on an inventor’s technical service availability. Therefore, the inventor’s technology service acts as a mediator in the relationship between university technology transfer sustainability and influence factors. Universities ought to establish the technology transfer model, which focuses on the inventor’s tacit knowledge transfer service, and promotes the sustainable development of the university.

  13. Chemical Technology Division annual progress report for period ending March 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Ferguson, D.E.

    1978-08-01

    Separate abstracts were prepared for the various sections on fission energy, coal conversion and utilization, waste management, basic science and technology, biotechnology and environmental studies, special isotope production and separations, Nuclear Regulatory Commission programs, and miscellaneous programs.

  14. Chemical Technology Division progress report for the period April 1, 1981-March 31, 1983

    International Nuclear Information System (INIS)

    1983-09-01

    Separate abstracts were prepared for eight sections of the report: nuclear waste management; fossil energy; basic science and technology; biotechnology and environmental programs; transuranium-element processing; Nuclear Regulatory Commission programs; Three Mile Island support studies; and miscellaneous programs

  15. Mobile technology for expansion of service range medan public library

    Science.gov (United States)

    Siregar, A. R.; Dewiyana, H.

    2018-03-01

    The information society, especially library users, expects an easier and faster way to get information and share knowledge. The library also implements the best way to provide the best service and the easiest way to disseminate and share information with its users. One technology that allows libraries more closely with their users is mobile technology. This paper aims to determine the basic conditions of mobile technology services and mobile services most needed library users, as well as constraints faced by libraries and users in the application of mobile technology. This paper will help libraries to develop better M-Library services in expanding the reach of library services. Methods of data collection were conducted through surveys through questionnaires, interviews, and direct observation. The results of the use of mobile technology applications in libraries bring great advantages to provide better library services and to improve accessibility of library resources in the easiest way, but due to lack of funds, lack of skills and lack of staff, many libraries are unable to provide this service with very successful.

  16. Chemical Technology Division annual progress report for period ending March 31, 1976

    International Nuclear Information System (INIS)

    1976-09-01

    The status is reported for various research programs including waste management, transuranium-element processing, isotopic separations, preparation of 233 UO 2 , separations chemistry, biomedical technology, environmental studies, coal technology program, actinide oxides and nitrides and carbides, chemical engineering, controlled thermonuclear program, iodine studies, reactor safety, NRC programs, and diffusion of adsorbed species in porous media. Details of these programs are given in topical reports and journal articles

  17. Chemical Technology Division annual progress report for period ending March 31, 1976

    Energy Technology Data Exchange (ETDEWEB)

    1976-09-01

    The status is reported for various research programs including waste management, transuranium-element processing, isotopic separations, preparation of /sup 233/UO/sub 2/, separations chemistry, biomedical technology, environmental studies, coal technology program, actinide oxides and nitrides and carbides, chemical engineering, controlled thermonuclear program, iodine studies, reactor safety, NRC programs, and diffusion of adsorbed species in porous media. Details of these programs are given in topical reports and journal articles. (JSR)

  18. System aspects of management technology for scientific and educational services

    Directory of Open Access Journals (Sweden)

    A. A. Zatsarinnyy

    2017-01-01

    Full Text Available Research purpose: to develop the technology of operational-technical management of scientific and educational services. Methods: methods of patent research and analysis of critical technologies of information and control systems; methods of system approach to organize and manage IT services to meet business needs. Topicality. The state policy in the sphere of national security and socio-economic development of the Russian Federation, carried out in the face of new threats requires correcting structural imbalances in the economy. National interests should be implemented by means of strategic priorities in the various sectors of the economy, in the financial sphere - the timely implementation of government programs. In the Message of the President of the Russian Federation Vladimir Putin to the Federal Assembly on December 1, 2016 one of the priorities defined the creation of a national research infrastructure, representing the information and technology platform for the integration of the intellectual resources in the field of science, education and production with the aim of creating the conditions for qualitative changes in the field of science and technology. In this connection, scientific-methodical and systematic technical issues to systematize services of scientific and educational institutions of the country and creation of the united informational and analytical system of the management of such services seem to be topical. Within the framework of the whole complex of problems to design such a system, the development issues of technologies for the effective operational-technical management of scientific and educational services are of great interest. Results. The technology of operational-technical management of scientific and educational services was developed, which is a complex of technical solutions to provide information support for the activities of organizational systems – consumers and suppliers of scientific and educational

  19. Report of the Technology Service - Annex B

    International Nuclear Information System (INIS)

    Cupac, S.; Vukadin, Z.

    1994-01-01

    This annex covers: description of the organisational structure of the service, safeguard activities, increase of reactor operation capability, dosimetry and radiation protection tasks and an overview of the the activities of this Service. During 1992, there have been 12 safeguard IAEA inspections. Each time inspection covered fresh fuel, every third inspection included control of the spent fuel storage pool, and once during the fuel inventory control the reactor core was included. With the aim of increasing the operating capabilities besides improvement of experimental devices, construction of the experimental loop with separate cooling system was started. It is planned, as well to improve operating capabilities of horizontal experimental channels by purchasing neutron diffractometer, constructing three-crystal neutron spectrometer, application of three-crystal neutron spectrometer from Krakow, and using the time-of flight spectrometer constructed in the Institute. This Annex describes the possible activities for neutron radiography and isotope production, and includes radiation protection data [sr

  20. Assistive Technology Service Delivery in Rural School Districts

    Science.gov (United States)

    Ault, Melinda Jones; Bausch, Margaret E.; Mclaren, Elizabeth M.

    2013-01-01

    Little is known about the implementation of assistive technology (AT) services for students in rural areas. This study investigated the AT service delivery in 10 rural districts across six states. The results indicated that students use AT across functional areas, but considerably fewer number of devices than do those not living in rural areas. AT…

  1. In-Service Science Teachers' Attitude towards Information Communication Technology

    Science.gov (United States)

    Kibirige, I.

    2011-01-01

    The purpose of this study is to determine the attitude of in-service science teachers towards information communication technology (ICT) in education. The study explores the relationship between in-service teachers and four independent variables: their attitudes toward computers; their cultural perception of computers; their perceived computer…

  2. Efficency of mobile authentication service technology on phase 1 ...

    African Journals Online (AJOL)

    Conclusion: The findings of this study revealed that some brands antimalarial and antibacterial drugs available in the Nigeria drug market still do not have MAS technology inscribed on them and efficiency of Mobile Authentication Service is directly a function of the competence of the service providers authorized to manage ...

  3. Managing Technological Change in Libraries and Information Services.

    Science.gov (United States)

    Klobas, Jane E.

    1990-01-01

    Examines factors to be considered in the management of technological change in libraries and information services. The organizational climate for change is discussed, and factors to consider when developing a strategy for introducing a new product, service, or system are described, including leadership, goals, political processes, marketing, and…

  4. Division of Atomic Physics. Lund Institute of Technology. Progress Report 1993-1994

    International Nuclear Information System (INIS)

    Wahlstroem, C.G.

    1995-01-01

    The Division of Atomic Physics is responsible for basic physics teaching in all engineering disciplines and for specialized teaching in Optics, Atomic Physics, Spectroscopy, Laser Physics, and Non-Linear Optics. Research activities are mainly carried out in the fields of basic and applied spectroscopy, largely based on the use of lasers. Projects in the following areas are reported: Basic Atomic Physics - Atomic physics with high power laser radiation; Laser spectroscopic investigations of atomic and ionic excited states in the short-wavelength region; Laser spectroscopy in the visible; Theoretical Atomic Physics; Applied Optics and Quantum Electronics -High resolution spectroscopy; Photon echoes in Rare Earth Ion Doped Crystals; diode laser Spectroscopy; Environmental Remote Sensing -Tropospheric Ozone Lidar; Measurement of gases of geophysical origin; Industrial and Urban Pollution Measurements; Laser induced fluorescence of vegetation and water; Applications in Medicine and Biology - Tissue diagnostic using Laser-induced fluorescence; Photodynamic Therapy; Measurement of Optical Properties of Tissue with applications to Diagnostics; Two Photon Excited fluorescence Microscopy; Capillary Electrophoresis; New Techniques; Industrial Applications - Optical spectroscopy in Metallurgy; Physics of Electric Breakdown in Dielectric liquids; Optical Spectroscopy of Paper

  5. Division of Atomic Physics. Lund Institute of Technology. Progress Report 1993-1994

    Energy Technology Data Exchange (ETDEWEB)

    Wahlstroem, C.G. [ed.

    1995-12-31

    The Division of Atomic Physics is responsible for basic physics teaching in all engineering disciplines and for specialized teaching in Optics, Atomic Physics, Spectroscopy, Laser Physics, and Non-Linear Optics. Research activities are mainly carried out in the fields of basic and applied spectroscopy, largely based on the use of lasers. Projects in the following areas are reported: Basic Atomic Physics - Atomic physics with high power laser radiation; Laser spectroscopic investigations of atomic and ionic excited states in the short-wavelength region; Laser spectroscopy in the visible; Theoretical Atomic Physics; Applied Optics and Quantum Electronics -High resolution spectroscopy; Photon echoes in Rare Earth Ion Doped Crystals; diode laser Spectroscopy; Environmental Remote Sensing -Tropospheric Ozone Lidar; Measurement of gases of geophysical origin; Industrial and Urban Pollution Measurements; Laser induced fluorescence of vegetation and water; Applications in Medicine and Biology - Tissue diagnostic using Laser-induced fluorescence; Photodynamic Therapy; Measurement of Optical Properties of Tissue with applications to Diagnostics; Two Photon Excited fluorescence Microscopy; Capillary Electrophoresis; New Techniques; Industrial Applications - Optical spectroscopy in Metallurgy; Physics of Electric Breakdown in Dielectric liquids; Optical Spectroscopy of Paper.

  6. Division of Atomic Physics. Lund Institute of Technology. Progress Report 1993-1994

    Energy Technology Data Exchange (ETDEWEB)

    Wahlstroem, C G [ed.

    1996-12-31

    The Division of Atomic Physics is responsible for basic physics teaching in all engineering disciplines and for specialized teaching in Optics, Atomic Physics, Spectroscopy, Laser Physics, and Non-Linear Optics. Research activities are mainly carried out in the fields of basic and applied spectroscopy, largely based on the use of lasers. Projects in the following areas are reported: Basic Atomic Physics - Atomic physics with high power laser radiation; Laser spectroscopic investigations of atomic and ionic excited states in the short-wavelength region; Laser spectroscopy in the visible; Theoretical Atomic Physics; Applied Optics and Quantum Electronics -High resolution spectroscopy; Photon echoes in Rare Earth Ion Doped Crystals; diode laser Spectroscopy; Environmental Remote Sensing -Tropospheric Ozone Lidar; Measurement of gases of geophysical origin; Industrial and Urban Pollution Measurements; Laser induced fluorescence of vegetation and water; Applications in Medicine and Biology - Tissue diagnostic using Laser-induced fluorescence; Photodynamic Therapy; Measurement of Optical Properties of Tissue with applications to Diagnostics; Two Photon Excited fluorescence Microscopy; Capillary Electrophoresis; New Techniques; Industrial Applications - Optical spectroscopy in Metallurgy; Physics of Electric Breakdown in Dielectric liquids; Optical Spectroscopy of Paper.

  7. In-Service Preschool Teachers' Thoughts about Technology and Technology Use in Early Educational Settings

    Science.gov (United States)

    Kara, Nuri; Cagiltay, Kursat

    2017-01-01

    The purpose of this study is to understand in-service preschool teachers' thoughts about technology and technology use in early educational settings. Semi-structured interviews were conducted with 18 in-service preschool teachers. These teachers were selected from public and private preschools. Convenient sampling was applied because teachers who…

  8. 34 CFR 300.6 - Assistive technology service.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Assistive technology service. 300.6 Section 300.6 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION... selection, acquisition, or use of an assistive technology device. The term includes— (a) The evaluation of...

  9. REST services and APIs using blockchain technology

    OpenAIRE

    Balantič, Domen

    2017-01-01

    In the diploma thesis we described the basic concepts and principles of the blockchain technology, which enables a decentralized way of data storing. The advantage of decentralized data storage is in a high integrity of stored data since it is virtually impossible to change it after saving it into the blockchain. We described the features of the three most popular and well known platforms of the blockchain - the Bitcoin platform, the Ethereum platform, and the Hyperledger Fabric platform - an...

  10. Managing Database Services: An Approach Based in Information Technology Services Availabilty and Continuity Management

    Directory of Open Access Journals (Sweden)

    Leonardo Bastos Pontes

    2017-01-01

    Full Text Available This paper is held in the information technology services management environment, with a few ideas of information technology governance, and purposes to implement a hybrid model to manage the services of a database, based on the principles of information technology services management in a supplementary health operator. This approach utilizes fundamental nuances of services management guides, such as CMMI for Services, COBIT, ISO 20000, ITIL and MPS.BR for Services; it studies harmonically Availability and Continuity Management, as most part of the guides also do. This work has its importance because it keeps a good flow in the database and improves the agility of the systems in the accredited clinics in the health plan.

  11. Archival services and technologies for scientific data

    International Nuclear Information System (INIS)

    Meyer, Jörg; Hardt, Marcus; Streit, Achim; Wezel, Jos van

    2014-01-01

    After analysis and publication, there is no need to keep experimental data online on spinning disks. For reliability and costs inactive data is moved to tape and put into a data archive. The data archive must provide reliable access for at least ten years following a recommendation of the German Science Foundation (DFG), but many scientific communities wish to keep data available much longer. Data archival is on the one hand purely a bit preservation activity in order to ensure the bits read are the same as those written years before. On the other hand enough information must be archived to be able to use and interpret the content of the data. The latter is depending on many also community specific factors and remains an areas of much debate among archival specialists. The paper describes the current practice of archival and bit preservation in use for different science communities at KIT for which a combination of organizational services and technical tools are required. The special monitoring to detect tape related errors, the software infrastructure in use as well as the service certification are discussed. Plans and developments at KIT also in the context of the Large Scale Data Management and Analysis (LSDMA) project are presented. The technical advantages of the T10 SCSI Stream Commands (SSC-4) and the Linear Tape File System (LTFS) will have a profound impact on future long term archival of large data sets.

  12. Report of the Technology Service - Annex B

    International Nuclear Information System (INIS)

    Martinc, R.; Cupac, S.; Vukadin, Z.; Stosic, T.

    1990-01-01

    This annex covers: description of the organisational structure of the service, safeguard activities, increase of reactor operation capability, dosimetry and radiation protection tasks and an overview of the the activities of this Service. During 1990, there have been 12 safeguard IAEA inspections. Each time inspection covered fresh fuel inventory, once the inspection included control of the irradiated fuel from the reactor core was included. The inspection of fuel sample from the core were used for control of the deposition on the cladding surface, which was found to exist but considered to be insignificant. Due to high quantity of the fresh highly enriched fuel the frequency of inspections was increased compared to previous years and all the containers with the fresh fuel were sealed by the IAEA inspectors. This Annex includes the activity concerned with dosimetry and radiation protection, contamination of the working environment, decontamination, occupational exposure, radioactive waste. This Annex describes as well, the possible activities for neutron radiography and isotope production, and includes radiation protection data [sr

  13. Archival Services and Technologies for Scientific Data

    Science.gov (United States)

    Meyer, Jörg; Hardt, Marcus; Streit, Achim; van Wezel, Jos

    2014-06-01

    After analysis and publication, there is no need to keep experimental data online on spinning disks. For reliability and costs inactive data is moved to tape and put into a data archive. The data archive must provide reliable access for at least ten years following a recommendation of the German Science Foundation (DFG), but many scientific communities wish to keep data available much longer. Data archival is on the one hand purely a bit preservation activity in order to ensure the bits read are the same as those written years before. On the other hand enough information must be archived to be able to use and interpret the content of the data. The latter is depending on many also community specific factors and remains an areas of much debate among archival specialists. The paper describes the current practice of archival and bit preservation in use for different science communities at KIT for which a combination of organizational services and technical tools are required. The special monitoring to detect tape related errors, the software infrastructure in use as well as the service certification are discussed. Plans and developments at KIT also in the context of the Large Scale Data Management and Analysis (LSDMA) project are presented. The technical advantages of the T10 SCSI Stream Commands (SSC-4) and the Linear Tape File System (LTFS) will have a profound impact on future long term archival of large data sets.

  14. Report of the Technology Service - Annex B

    International Nuclear Information System (INIS)

    Martinc, R.; Cupac, S.; Vukadin, Z.; Stosic, T.

    1989-01-01

    This annex covers: description of the organisational structure of the service, safeguard activities, increase of reactor operation capability, dosimetry and radiation protection tasks and an overview of the the activities of this Service. During 1989, there have been 2 routine safeguard IAEA inspections. Each time inspection covered fresh fuel, spent fuel from the storage pool, and the fuel in the reactor core was included. The inspection of fuel sample from the core were used for control of the deposition on the cladding surface, which was found to exist but considered to be insignificant. Due to high quantity of the fresh highly enriched fuel it is expected that the frequency of inspections would be increased or sealing a number of the containers by the IAEA inspectors. This Annex includes the activity concerned with dosimetry and radiation protection, contamination of the working environment, decontamination, occupational exposure, radioactive waste. Three separate parts included in this Annex describe: the proposal of future action plan for reactor restart, safety aspects of Wigner energy accumulation in the graphite side reactor reflector, and reactor core calculation by a two-group neutron diffusion program in r-z geometry [sr

  15. 75 FR 73132 - Sypris Technologies, Sypris Solutions Division, Kenton, OH; Notice of Revised Determination on...

    Science.gov (United States)

    2010-11-29

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-70,910] Sypris Technologies..., 2010 (75 FR 65514). The initial investigation resulted in a negative determination that was based on..., and all workers in the group threatened with total or partial separation from employment on date of...

  16. Can Technology Improve Large Class Learning? The Case of an Upper-Division Business Core Class

    Science.gov (United States)

    Stanley, Denise

    2013-01-01

    Larger classes are often associated with lower student achievement. The author tested the hypothesis that the introduction of personal response systems significantly improves scores in a 250-seat classroom, through the channels of improved attendance and engagement. She focused on how continuous participation with the technology could change…

  17. IFLA General Conference, 1985. Division on Special Libraries. Section on Science and Technology Libraries. Papers.

    Science.gov (United States)

    International Federation of Library Associations, The Hague (Netherlands).

    Papers on science and technology libraries which were presented at the 1985 International Federation of Library Associations (IFLA) conference include: (1) "UAP (Universal Availability of Publications) and User Training for Categories of Grey Literature" (Dieter Schmidmaier, Mining Academy Freiberg, East Germany); (2) "Resource…

  18. Developing chiral technologies. Optical division by liquid chromatography; Hattensuru kiraru technology. Ekitai chromatography ni yoru kogaku bunkatsu

    Energy Technology Data Exchange (ETDEWEB)

    Onishi, a. [Daicel Chemical Industries, Ltd., Osaka (Japan)

    1998-05-01

    Optical division using chiral fixing phase for polysaccharide derivative based HPLC has been exhibiting superior capability as an analysis means. It now has transcended the framework of analysis as a result of the encounter with the SMB process, and is completing itself as an optically active body manufacturing means. This paper introduces the following examples of applying the chiral fixing phase for HPLC using polysaccharide derivatives as an unconformity identifier to the unconformity identifying mechanism and mass synthesis: 1) aromatic groups and carbamate groups as substitution groups are arranged regularly along a polysaccharide main chain having a regular and unconformable stereostructure, and a certain `unconformity identification field` is formed: 2) hydrogen bonding and dipole-to-dipole interactions take place between solutes in the ester groups and carbamate groups, and such an interaction act as stacking of aromatic rings among those having aromatic rings; and as a result, interactions in 2) occur in the `unconformity identification field` in 1), where the unconformity identification is executed. This paper describes the pseudo migration bed (SMB) process developed by UOP Corporation as a method for mass-synthesizing fillers for the polysaccharide derivative based HPLC. 6 refs., 3 figs.

  19. Technology Licensing Strategy for Network Product in a Service Industry

    Directory of Open Access Journals (Sweden)

    Xianpei Hong

    2015-01-01

    Full Text Available Technology licensing has gained significant attention in literature and practice as a rapid and effective way to improve firm’s capability of technology innovation. In this paper, we investigate a duopolistic service provider competition market, where service providers develop and sell a kind of network product. In this setting, we analyze the innovating service provider’s four licensing strategies: no licensing, fixed fee licensing, royalty licensing, and two-part tariff licensing. The literature suggests that when the network products can be completely substituted, two-part tariff licensing is the optimal strategy of the innovating service provider. We find that when the network products cannot be completely substituted, two-part tariff licensing is not always optimal. The degree of the product differentiation, the intensity of the network effects, and the R&D cost of the potential licensee play a key role in determining the innovating service provider’s optimal licensing strategies.

  20. Division of atomic physics

    International Nuclear Information System (INIS)

    Kroell, S.

    1994-01-01

    The Division of Atomic Physics, Lund Institute of Technology (LTH), is responsible for the basic physics teaching in all subjects at LTH and for specialized teaching in Optics, Atomic Physics, Atomic and Molecular Spectroscopy and Laser Physics. The Division has research activities in basic and applied optical spectroscopy, to a large extent based on lasers. It is also part of the Physics Department, Lund University, where it forms one of eight divisions. Since the beginning of 1980 the research activities of our division have been centred around the use of lasers. The activities during the period 1991-1992 is described in this progress reports

  1. THE USE OF INTERNET SERVICES IN TEACHING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    M. L. Gruzdeva

    2018-01-01

    Full Text Available Introduction: The article is devoted to the use of various means and technologies of the Internet on technology lessons. As the authors of the article show, recently a lot of sites, applicable for joint work, so-called Web 2.0 tools have been developed and put into operation. Many of them can facilitate the work of teachers, make the material more visible, more quickly monitor the performance of homework, etc. The authors are sure that such services as google-tables and google-presentations can reduce the organizational time in the lesson, which is so expensive for practical classes, will make it possible to disassemble more new material, increase the efficiency and speed of the practical work.Materials and methods: The article examines different methods of organizing a lesson using Internet services: when studying a new topic, when working on a project, with differentiated work in a lesson, etc.The results of the research: The article describes the Internet services that the technology teachers can use in their professional activities: a graphical service for creating the layout and interior of the house Planoplan, services that allow you to create schemes for embroidery and share the already created schemes with other embroiderers (igolki.net, x.fanreal.ru, crosti.ru and othersDiscussion and conclusion: The article discusses the complexity of the use of virtual services in the study of the subject of Technology, namely the fact that the student needs to learn the manual operations used for centuries that were not worked out on one generation of students with virtually no changes in the methodology. In addition, there are practically no services developed specifically for the method of teaching the subject of Technology. Internet technologies have firmly taken their positions in the life of modern society. Teachers should use all the tools that can attract the attention of a new generation to teach them their subject.

  2. CERN technology in the service of medicine

    CERN Multimedia

    2001-01-01

    The prototype of the first module of the LInac BOster (LIBO) has been constructed and tested at CERN. This new medical accelerator offers new perspectives in deep-seated tumour treatment.   Accelerator technology developed at CERN is set to bring about important advances in cancer therapy. The linac booster - LIBO - project aims to build a 3GHz proton linear accelerator to boost to 200 MeV the energy of the beam from 50-70 MeV cyclotrons, existing in several hospitals and laboratories. This will allow deep-seated tumours to be treated (see box). The prototype of the first LIBO module has just passed high power RF tests at CERN. Two members of the LIBO collaboration, Riccardo Zennaro and Paolo Berra, with the first LIBO module installed in the LIL tunnel. The LIBO idea goes back to 1993 when it was conceived by CERN's Ugo Amaldi, founder of Italy's TERA foundation. From the beginning, Mario Weiss, a former CERN staff member has led the project. A decisive step was taken in 1998 when a collaboration...

  3. Quarterly progress report for the Chemical and Energy Research Section of the Chemical Technology Division: October-December 1997

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R.T.

    1999-02-01

    This report summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during the period October--December 1997. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications. The report describes the various tasks performed within six major areas of research: Hot Cell Operations, Process Chemistry and Thermodynamics, Separations and Materials Synthesis, Fluid Structure and Properties, Biotechnology Research, and Molecular Studies. The name of a technical contact is included with each task described, and readers are encouraged to contact these individuals if they need additional information. Activities conducted within the area of Hot Cell Operations included efforts to optimize the processing conditions for Enhanced Sludge Washing of Hanford tank sludge, the testing of candidate absorbers and ion exchangers under continuous-flow conditions using actual supernatant from the Melton Valley Storage Tanks, and attempts to develop a cesium-specific spherical inorganic sorbent for the treatment of acidic high-salt waste solutions. Within the area of Process Chemistry and Thermodynamics, the problem of solids formation in process solutions from caustic treatment of Hanford sludge was addressed and experimental collaborative efforts with Russian scientists to determine the solidification conditions of yttrium barium, and copper oxides from their melts were completed.

  4. ONLINE-SERVICES AND INFORMATION TECHNOLOGIES IN DISTANCE LEARNING

    Directory of Open Access Journals (Sweden)

    U. A. Vishniakou

    2017-01-01

    Full Text Available The article deals with the analysis of distance learning (DL methods, approaches, technologies, tools, the use as known online services so and developing the new ones. The terminology in area of DL is discussed and differences between correspondence course and DL are done. The development tendencies of distance learning are analyzed. Their technical and organization components are done. The course programs for DL are realizing by software which functions are shown. The typical lines of DL, their advances and lacks are conceded. As DL advances are self activity, individuality, independence and so on. As DL lacks are insufficiently individual, psychological, practical aspects, writing forms of DL and so on.Technologies and organization of DL including IT are discussed. The tutor activity is divided on two stages: decision of methodological, organizational problems and realization of distance courses. The various kind of online services in DL such as chats, web, TV, video conferences multimedia, robot learning, web-services are shown. Such IT for DL as CD, net, TV, satellite, cloud are discussed.The models of integration decisions for DL development such as Remote Procedure Calls (RPS, Enterprise Application Integration (EAL, Web-Services (WS, Enterprise Service Bus (ESB are proposed. The content of e-learning online services including intellectual technologies and cloud computing are done. As new one integration method for DL is Semantic Web and Web-service (SWWS with knowledge representation support on ontology base and knowledge processing on agents support are representation.

  5. IMPROVING LOGISTICS SERVICES THROUGH THE TECHNOLOGY USED IN FLEET MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Mauro Vivaldini

    2012-12-01

    Full Text Available Outsourcing logistics has established itself in the area of the LSP (Logistics Service Provider, which offers a range of services to its customers. In this line, transportation is characterized as one of the most important services, and therefore efficient fleet management is essential for establishing a high level of customer service. With advances in technology and vehicle tracking systems, this approach of management has gained new possibilities for the improvement of logistics services. By studying the specific case of an LSP, this paper investigates the use of these technologies in the management of their business and services. The results indicate that the LSP seeks to increase its services and to streamline information in order to respond to customer needs in real time. It is also evident in this case under study that the combination of the technology available together with the fleet management system has become a distinguishing feature for this LSP, one which increases their skills and important information for both customers and business.

  6. Improving Educational Outcomes by Providing Educational Services through Mobile Technology

    Directory of Open Access Journals (Sweden)

    Hosam Farouk El-Sofany

    2013-01-01

    Full Text Available The use of Computers, Networks, and Internet has successfully enabled educational institutions to provide their students and instructors with various online educational services. With the recent developments in M-learning and mobile technology, further possibilities are emerging to provide such services through mobile devices such as mobile phones and PDAs. By providing the educational services using wireless and mobile technologies, the educational institutions can potentially bring great convenience to those off-campus students who do not always have time to find Internet enabled computers to get the important educational information from their academic institutions. With the mobile or M-educational services, both the students and the instructors can access the services anytime and anywhere they want. This paper discusses those M-educational services that can be moved to the mobile platform and then presents the system prototype and architecture that integrate these services into the mobile technology platform. The paper will conclude with a description of the formative evaluation of the system prototype.

  7. Technology Integration Division FY 1992 Public Participation Program Management and Implementation Plan

    International Nuclear Information System (INIS)

    1991-12-01

    The mission of the Office of Technology Development (OTD), to develop and apply existing and innovative environmental restoration and waste management technologies to the cleanup to Department of Energy (DOE) sites and facilities in accordance with applicable regulations, is to be carried out through the central mechanisms of the Integrated Demonstration (ID) and Integrated Program (IP). Regulations include provisions for public participation in DOE decision making regarding IDs. Beyond these requirements, DOE seeks to foster a more open culture in which public participation, based on two-way communication between DOE and the public, is not only welcomed, but actively encouraged. The public to which the Program is addressed actually consists of several distinct ''publics:'' state and local government officials; Indian tribes; citizen groups and individuals concerned about specific issues; citizen groups or individuals who are opinion leaders in their communities; other federal agencies; private industry; and academia involved in IDs. Participation of these publics in decision making means that their concerns, needs, objectives, and other input are identified by two-way communication between them and DOE, and that these factors are considered when decisions made about OTD activities. This plan outlines the TIPs Public Participation Program goals, objectives, and steps to be taken during Fiscal Year (FY) 1992 to move toward those goals and objectives, based on the challenges and opportunities currently recognized or assumed

  8. 2002 Chemical Engineering Division annual report

    International Nuclear Information System (INIS)

    Lewis, D.; Graziano, D.; Miller, J. F.

    2003-01-01

    The Chemical Engineering Division is one of eight engineering research divisions within Argonne National Laboratory, one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base by developing innovative technology and transferring it to industry. The Division is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced electrochemical power sources, and management of both high- and low-level nuclear wastes. Although this work is often indistinguishable from basic research, our efforts are directed toward the practical devices and processes that are covered by Argonne's mission. Additionally, the Division operates the Analytical Chemistry Laboratory; Environment, Safety, and Health Analytical Chemistry services; and Dosimetry and Radioprotection services, which provide a broad range of analytical services to Argonne and other organizations. The Division is multidisciplinary. Its people have formal training as ceramists; physicists; material scientists; electrical, mechanical, chemical, and nuclear engineers; and chemists. They have experience working in academia; urban planning; and the petroleum, aluminum, and automotive industries. Their skills include catalysis, ceramics, electrochemistry, metallurgy, nuclear magnetic resonance spectroscopy, and petroleum refining, as well as the development of nuclear waste forms, batteries, and high-temperature superconductors. Our wide-ranging expertise finds ready application in solving energy and environmental problems. Division personnel are frequently called on by

  9. Educational technology infrastructure and services in North American medical schools.

    Science.gov (United States)

    Kamin, Carol; Souza, Kevin H; Heestand, Diane; Moses, Anna; O'Sullivan, Patricia

    2006-07-01

    To describe the current educational technology infrastructure and services provided by North American allopathic medical schools that are members of the Association of American Medical Colleges (AAMC), to present information needed for institutional benchmarking. A Web-based survey instrument was developed and administered in the fall of 2004 by the authors, sent to representatives of 137 medical schools and completed by representatives of 88, a response rate of 64%. Schools were given scores for infrastructure and services provided. Data were analyzed with one-way analyses of variance, chi-square, and correlation coefficients. There was no difference in the number of infrastructure features or services offered based on region of the country, public versus private schools, or size of graduating class. Schools implemented 3.0 (SD = 1.5) of 6 infrastructure items and offered 11.6 (SD = 4.1) of 22 services. Over 90% of schools had wireless access (97%), used online course materials for undergraduate medical education (97%), course management system for graduate medical education (95%) and online teaching evaluations (90%). Use of services differed across the undergraduate, graduate, and continuing medical education continuum. Outside of e-portfolios for undergraduates, the least-offered services were for services to graduate and continuing medical education. The results of this survey provide a benchmark for the level of services and infrastructure currently supporting educational technology by AAMC-member allopathic medical schools.

  10. Tecnologie dell’informazione e della comunicazione, terziarizzazione e nuova divisione del lavoro digitale (Information and Communication Technologies, Tertiarization and the New Digital Division of Labour

    Directory of Open Access Journals (Sweden)

    Nicola De Liso

    2012-04-01

    Full Text Available The process of tertiarisation of our economies is taking place along with the ever-increasing pervasiveness of information and communication technologies (ICTs. ICTs, in turn, are becoming "convergent" as they share a common basis, namely digital technology. This common basis is becoming so important that it has engendered the need to add a new dimension to the original Smithian idea of the division of labour, i.e. we have to take into account the new forms of the digital division of labour. This work therefore considers the broad process of structural economic dynamics which is engendered by the processes of digitization of our economies, taking the 1960s as a starting point.     JEL Codes: O33, L86, L80Keywords: Technology, Technologies

  11. Introducing modern technology to promote transparency in health services.

    Science.gov (United States)

    Islam, Mohammad Shafiqul

    2015-01-01

    Quantitative indicators show that Bangladeshi maternal and child healthcare is progressing satisfactorily. However, healthcare quality is still inadequate. It is hypothesised that modern technology enhances healthcare quality. Therefore, the purpose of this paper is to investigate how modern technology such as electronic record keeping and the internet can contribute to enhancing Bangladeshi healthcare quality. This study also explores how socio-economic and political factors affect the healthcare quality. This paper is based on a qualitative case study involving 68 in-depth interviews with healthcare professionals, elected representatives, local informants and five focus group discussions with healthcare service users to understand technology's effect on health service quality. The study has been conducted in one rural and one urban service organisations to understand how various factors contribute differently to healthcare quality. The findings show that modern technology, such as the internet and electronic devices for record keeping, contribute significantly to enhancing health service transparency, which in turn leads to quality health and family planning services. The findings also show that information and communication technology (ICT) is an effective mechanism for reducing corruption and promoting transparency. However, resource constraints impact adversely on the introduction of technology, which leads to less transparent healthcare. Progress in education and general socio-economic conditions makes it suitable to enhance ICT usage, which could lead to healthcare transparency, but political and bureaucratic factors pose a major challenge to ensure transparency. This paper can be a useful guide for promoting governance and healthcare quality in developing countries including Bangladesh. It analyses the ICT challenges that healthcare staff face when promoting transparent healthcare. This paper provides a deeper understanding of transparency and healthcare

  12. HIGH SERVE - service for nuclear technology. Buyers' guide

    International Nuclear Information System (INIS)

    1986-01-01

    The Deutsches Atomforum e.V. (German Atomic Forum) has organised a specialist conference with the title 'HIGH SERVE - service for nuclear technology' for October 1986. In parallel with the conference, an exhibition will make it possible for interested firms to present their service and product ranges. The experience gained in the preparation of this exhibition has been used to produce the 'HIGH SERVE - buyers guide'. The intention is to make the market more comprehensible. (orig./HP) [de

  13. IPTV technology for the wireless Internet service provider (WISP

    Directory of Open Access Journals (Sweden)

    Mitchell Vásquez Bermúdez

    2018-02-01

    Full Text Available This article describes the implementation of the IPTV technology through an open source system for the wireless Internet service provider (WISP in the Cerecita site, located in the province of Guayas, Ecuador. The feasibility of implementing the IPTV technology is given through the use of the Emby Server application, in addition to the use of an operating system such as CentOS 7, which are open source and have the necessary requirements for the creation of this service. The analysis of data tra c generated on the WISP network, which will establish the advantages and disadvantages generated by the transmission of this technology, created to VOD multimedia content server that allows the video signal to be sent to users Finally, a feasibility study was carried out to analyze the advantages and disadvantages that exist in the implementation of this IPTV technology.

  14. The Influence of Table Top Technology in Full- service Restaurants

    OpenAIRE

    Susskind, Alex M.; Curry, Benjamin

    2016-01-01

    The use of tabletop technology continues to grow in the restaurant industry, and this study identifies the strengths and weakness of the technology, how it influences customers, and how it can improve the bottom line for managers and business owners. Results from two studies involving a full-service casual dining chain show that dining time was significantly reduced among patrons who used the tabletop hardware to order or pay for their meals, as was the time required for servers t...

  15. Framework for the Integration of Service and Technology Strategies

    OpenAIRE

    Jühling, E.; Torney, M.; Herrmann, C.; Dröder, K.

    2009-01-01

    Organised by: Cranfield University After sales service is a highly profitable business for manufacturers of technology-driven products. Due to this fact competitors want to share in high profit margins. At the same time after sales business has to deal with an increasing range of variants of products and technologies, shorter life cycles and changing customer demands. In spite of these manifold challenges, often neither after sales departments are involved in the early product ...

  16. Supporting the spread of health technology in community services.

    Science.gov (United States)

    Sitton-Kent, Lucy; Humphreys, Catriona; Miller, Phillip

    2018-03-02

    Health technology has been proposed as a route to financial savings and improved patient safety for many years within the NHS. Nurses have a key role to play in transforming care through such technology but, despite high-level endorsement, implementation of health technology has been uneven across NHS community services. This article looks at three promising applications of health technology in community nursing: mobile access to digital care records; digital imaging; and remote face-to-face consultations. Current evidence for these technologies gives some indication of what is required before health technologies can benefit patients. Rapidly changing health technologies make it difficult for community services to make fully informed decisions when implementing them. There are challenges in predicting the full financial and efficiency impacts, in making robust estimates of costs and workload implications and in anticipating the effects on patient care and staff experience. Despite these problems, there is mounting evidence of the benefits of technological innovations available to community nurses and their patients.

  17. Technology usage, quality management system, and service quality in Thailand.

    Science.gov (United States)

    Sivabrovornvatana, Nilubon; Siengthai, Sununta; Krairit, Donyaprueth; Paul, Himangshu

    2005-01-01

    This article aims to explore the relationship between technology and quality management for enhancing Thai hospital service quality. The paper presents the findings of an exploratory study that investigates service quality from the customer and service provider perception. In-depth interviews were conducted with respondents in Thai hospitals. The interviews explored service-related factors that patients and service providers perceive to be important for hospital services. The first interview group consisted of professionals as internal customers in direct contact with external customers, while the second group consisted of external customers of the same hospitals. The study's outcomes clearly suggest factors that make significant contribution to service quality. These factors can be categorized according to five SERVQUAL dimensions (reliability, responsiveness, assurance, empathy, and tangibility), although some factors required slightly different interpretation. The findings suggest that hospitals can develop an appropriate approach to their advantage, which can yield sustainable improvement in service quality as perceived by patients and professionals. Hospitals can make better quality decisions based on structured measurement and knowledge. It is recommended that managers apply this knowledge for successful implementation of activities related to service quality in their organizations.

  18. Application of Ethics for Providing Telemedicine Services and Information Technology.

    Science.gov (United States)

    Langarizadeh, Mostafa; Moghbeli, Fatemeh; Aliabadi, Ali

    2017-10-01

    Advanced technology has increased the use of telemedicine and Information Technology (IT) in treating or rehabilitating diseases. An increased use of technology increases the importance of the ethical issues involved. The need for keeping patients' information confidential and secure, controlling a number of therapists' inefficiency as well as raising the quality of healthcare services necessitates adequate heed to ethical issues in telemedicine provision. The goal of this review is gathering all articles that are published through 5 years until now (2012-2017) for detecting ethical issues for providing telemedicine services and Information technology. The reason of this time is improvement of telemedicine and technology through these years. This article is important for clinical practice and also to world, because of knowing ethical issues in telemedicine and technology are always important factors for physician and health providers. the required data in this research were derived from published electronic sources and credible academic articles published in such databases as PubMed, Scopus and Science Direct. The following key words were searched for in separation and combination: tele-health, telemedicine, ethical issues in telemedicine. A total of 503 articles were found. After excluding the duplicates (n= 93), the titles and abstracts of 410 articles were skimmed according to the inclusion criteria. Finally, 64 articles remained. They were reviewed in full text and 36 articles were excluded. At the end, 28 articles were chosen which met our eligibility criteria and were included in this study. Ethics has been of a great significance in IT and telemedicine especially the Internet since there are more chances provided for accessing information. It is, however, accompanied by a threat to patients' personal information. Therefore, suggestions are made to investigate ethics in technology, to offer standards and guidelines to therapists. Due to the advancement in

  19. Interdisciplinary technology assessment of service robots: the psychological/work science perspective.

    Science.gov (United States)

    Fischer, Martin

    2012-12-01

    The article sheds light on psychological and work science aspects of the design and utilization of service robots. An initial presentation of the characteristics of man-robot interaction is followed by a discussion of the principles of the division of functions between human beings and robots in service area work systems. The following aspects are to be considered: (1) the organisation of societal work (such as the different employment and professional profiles of service employees), (2) the work tasks to be performed by humans and robots (such as handling, monitoring or decision-making tasks), (3) the possibilities and the limitations of realizing such tasks by means of information technology (depending, for example, on the motoric capabilities, perception and cognition of the robot). Consideration of these three design perspectives gives rise to criteria of usability. Current debate focuses on the (work science) principles of man-machine communication, though in future these should be supplemented with robot-specific criteria such as "motoric capabilities" or "relationship quality." The article concludes by advocating the convergence and combination of work science criteria with ideas drawn from participative design approaches in the development and utilization of service robots.

  20. United States geothermal technology: Equipment and services for worldwide applications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    This document has two intended audiences. The first part, ``Geothermal Energy at a Glance,`` is intended for energy system decision makers and others who are interested in wide ranging aspects of geothermal energy resources and technology. The second part, ``Technology Specifics,`` is intended for engineers and scientists who work with such technology in more detailed ways. The glossary at the end of the document defines many of the specialized terms. A directory of US geothermal industry firms who provide goods and services for clients around the world is available on request.

  1. Performance Analyses in an Assistive Technology Service Delivery Process

    DEFF Research Database (Denmark)

    Petersen, Anne Karin

    Performance Analyses in an Assistive Technology Service Delivery Process.Keywords: process model, occupational performance, assistive technologiesThe Poster is about teaching students, using models and theory in education and practice. It is related to Occupational therapy process and professional...... af top-til-bund, klientcentreret og aktivitetsbaseret interventioner, ERGO/MunksgaardFisher, A. &, Griswold, L. A., 2014. Performance Skills. I: B.Schell red.2014 Occupational Therapy. Willard &Spackman’s occupational therapy. -12th ed., p.249-264Cook A.M., Polgar J.M. (2015) Assistive Technologies...

  2. The Adoption of Cloud Computing Technology for Library Services ...

    African Journals Online (AJOL)

    The study investigated the rationales for the adoption of cloud computing technology for library services in NOUN Library. Issues related to the existing computer network available in NOUN library such as LAN, WAN, rationales for the adoption of cloud computing in NOUN library such as the need to disclose their collections ...

  3. Case Study – Idling Reduction Technologies for Emergency Service Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

  4. The Deming Method: Systems Theory for Educational Technology Services.

    Science.gov (United States)

    Richie, Mark L.

    1993-01-01

    Discusses quality management principles as taught by W. Edwards Deming and describes their applications to educational technology services. Traditional organizational charts are explained; and benefits of using flow charts in Deming's systems are described, including better communications between departments, building teamwork, and opportunities…

  5. Evaluation of Public E-Services and Information Technology Accessibility in Different Social Groups

    Directory of Open Access Journals (Sweden)

    Ramutė Naujikienė

    2012-12-01

    Full Text Available The purpose of this study is to develop an approach based on the social quality evaluation square model for evaluation of information technology usage in different social groups. Componential view to the accessibility of e-services including IT means providing the possibility to research the influences of different life conditions to usage of the public e-services. The task of this empirical study is directed towards revealing the differences of e-inclusion and e-services accessibility for social groups of citizens of Lithuania, and to compare this accessibility data with other EU countries.Design/methodology/approach—the approach is based on the square model of social quality evaluation of information technology usage in different social groups. The social division square model includes an assessment of quality according to the evaluation of socioeconomic security, social inclusion, social cohesion, and empowerment. Empowerment can be defined as consisting of individual or collective decisions to act on one’s own life.Findings—the results are demonstrated by the accessibility of public e-services data, which are evaluated by the quality of social group development according to IT applications. The hypothesis was confirmed that the e-government activities can be realized by properly selecting and installing technologies, and using technology facilities. E-services influence the capabilities of state officials to apply modern technology and increase the availability of e-services for social groups. Results consist of individual or collective decisions to act on one’s own life, to implementation of effective information technologies in the e-government activities and using of e-services. An important indicator is the implementation of e-services in the activity of citizens. It is submitted as the index of e-participation in dealing with the activities of citizens and the possibilities of authorities directly related with providing services

  6. Evaluation of Public E-Services and Information Technology Accessibility in Different Social Groups

    Directory of Open Access Journals (Sweden)

    Ramutė Naujikienė

    2013-02-01

    Full Text Available The purpose of this study is to develop an approach based on the social quality evaluation square model for evaluation of information technology usage in different social groups. Componential view to the accessibility of e-services including IT means providing the possibility to research the influences of different life conditions to usage of the public e-services. The task of this empirical study is directed towards revealing the differences of e-inclusion and e-services accessibility for social groups of citizens of Lithuania, and to compare this accessibility data with other EU countries. Design/methodology/approach—the approach is based on the square model of social quality evaluation of information technology usage in different social groups. The social division square model includes an assessment of quality according to the evaluation of socioeconomic security, social inclusion, social cohesion, and empowerment. Empowerment can be defined as consisting of individual or collective decisions to act on one’s own life. Findings—the results are demonstrated by the accessibility of public e-services data, which are evaluated by the quality of social group development according to IT applications. The hypothesis was confirmed that the e-government activities can be realized by properly selecting and installing technologies, and using technology facilities. E-services influence the capabilities of state officials to apply modern technology and increase the availability of e-services for social groups. Results consist of individual or collective decisions to act on one’s own life, to implementation of effective information technologies in the e-government activities and using of e-services. An important indicator is the implementation of e-services in the activity of citizens. It is submitted as the index of e-participation in dealing with the activities of citizens and the possibilities of authorities directly related with providing

  7. Infrastructure Engineering and Deployment Division

    Data.gov (United States)

    Federal Laboratory Consortium — Volpe's Infrastructure Engineering and Deployment Division advances transportation innovation by being leaders in infrastructure technology, including vehicles and...

  8. 76 FR 34886 - General Services Administration Acquisition Regulation; Implementation of Information Technology...

    Science.gov (United States)

    2011-06-15

    ... Acquisition Regulation; Implementation of Information Technology Security Provision AGENCY: Office of... information technology (IT) supplies, services and systems with security requirements. DATES: Effective Date... effective date that include information technology (IT) supplies, services and systems with security...

  9. 77 FR 749 - General Services Administration Acquisition Regulation; Implementation of Information Technology...

    Science.gov (United States)

    2012-01-06

    ... Acquisition Regulation; Implementation of Information Technology Security Provision AGENCY: Office of... orders that include information technology (IT) supplies, services and systems. DATES: Effective Date... 6, 2012 that include information technology (IT) supplies, services and systems with security...

  10. 76 FR 2144 - Quest Diagnostics, Inc. Information Technology Help Desk Services Including On-Site Leased...

    Science.gov (United States)

    2011-01-12

    .... Information Technology Help Desk Services Including On-Site Leased Workers From Modis, West Norriton, PA..., applicable to workers of Quest Diagnostics, Inc., Information Technology Help Desk Services, West Norriton... Quest Diagnostics, Inc., Information Technology Help Desk [[Page 2145

  11. KNF's fuel service technologies and experiences

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jung Cheol; Kwon, Jung Tack; Kim, Jaeik; Park, Jong Youl; Kim, Yong Chan [KNF, Daejeon (Korea, Republic of)

    2009-04-15

    In Korea, since 1978, the commercial nuclear power plant was operated. After 10 years, from 1988, the nuclear fuel was produced by KNF (Korea Nuclear Fuel). The Fuel Service Team was established at KNF in 1995. Through the technical self reliance periods in cooperate with advanced foreign companies for 5 years, KNF has started to carry out fuel service activities onsite in domestic nuclear power plants. By ceaseless improving and advancing our own methodologies, after that, KNF is able to provide the most safe and reliable fuel repair services and poolside examinations including the root cause analysis of failed fuels. Recently, KNF developed the fuel cleaning system using ultrasonic technique for crud removal, and the CANDU fuel sipping system to detect a failed fuel bundle in PHWR. In this paper, all of KNF's fuel service technologies are briefly described, and the gained experience in shown.

  12. Technology Epiphany and an Integrated Product and Service

    Directory of Open Access Journals (Sweden)

    Satoru Goto

    2017-07-01

    Full Text Available This study aims at exploring how an integrated product and service contributes to achieving Innovation of Meaning (IoM or technology epiphany. Existing IoM studies have focused on intended meaning (as defined in new product development and ignored the received meaning that users reconstruct. The process by which a user assigns meaning to things can not only be static but also dynamic. This study focuses on integrated products and contexts offered by services and analyses the case of Japan’s largest manufacturer of ankle-foot orthoses. The results show that the service guides the users to reconstruct the meaning in dynamic cognitive processes and use the metaphors that contribute to the consistency between products and services.

  13. Service robotics: an emergent technology field at the interface between industry and services.

    Science.gov (United States)

    Ott, Ingrid

    2012-12-01

    The paper at hand analyzes the economic implications of service robots as expected important future technology. The considerations are embedded into global trends, focusing on the interdependencies between services and industry not only in the context of the provision of services but already starting at the level of the innovation process. It is argued that due to the various interdependencies combined with heterogenous application fields, the resulting implications need to be contextualized. Concerning the net labor market effects, it is reasonable to assume that the field of service robotics will generate overall job creation that goes along with increasing skill requirements demanded from involved employees. It is analyzed which challenges arise in evaluating and further developing the new technology field and some policy recommendations are given.

  14. An information technology framework for strengthening telehealthcare service delivery.

    Science.gov (United States)

    Chen, Li-Chin; Chen, Chi-Wen; Weng, Yung-Ching; Shang, Rung-Ji; Yu, Hui-Chu; Chung, Yufang; Lai, Feipei

    2012-10-01

    Telehealthcare has been used to provide healthcare service, and information technology infrastructure appears to be essential while providing telehealthcare service. Insufficiencies have been identified, such as lack of integration, need of accommodation of diverse biometric sensors, and accessing diverse networks as different houses have varying facilities, which challenge the promotion of telehealthcare. This study designs an information technology framework to strengthen telehealthcare delivery. The proposed framework consists of a system architecture design and a network transmission design. The aim of the framework is to integrate data from existing information systems, to adopt medical informatics standards, to integrate diverse biometric sensors, and to provide different data transmission networks to support a patient's house network despite the facilities. The proposed framework has been evaluated with a case study of two telehealthcare programs, with and without the adoption of the framework. The proposed framework facilitates the functionality of the program and enables steady patient enrollments. The overall patient participations are increased, and the patient outcomes appear positive. The attitudes toward the service and self-improvement also are positive. The findings of this study add up to the construction of a telehealthcare system. Implementing the proposed framework further assists the functionality of the service and enhances the availability of the service and patient acceptances.

  15. Constraints to connecting children with nature--Survey of U.S. Fish and Wildlife Service employees sponsored by the National Conservation Training Center, Division of Education Outreach

    Science.gov (United States)

    Ratz, Joan M.; Schuster, Rudy M.

    2011-01-01

    The U.S. Fish and Wildlife Service (FWS) names "connecting people with nature" as one of its top six priorities in the online Service Employee Pocket Guide. The National Conservation Training Center (NCTC) took the initiative to identify issues that impede greater progress in addressing constraints to connecting children with nature. The Division of Education Outreach at NCTC formed a working relation with the Policy Analysis and Science Assistance branch of the U.S. Geological Survey to conduct a study on these issues. To meet the objectives of the study, a survey of a sample of FWS employees was conducted. This report includes the description of how the survey was developed and administered, how the data were analyzed, and a discussion of the survey results. The survey was developed based on published literature and incorporated input from two working groups of professionals focused on the issue of connecting children with nature. Although the objective as stated by the FWS is to connect people with nature, the survey primarily focused on connecting children, rather than all people, with nature. The four primary concepts included on the survey were interpretation of how the FWS defined "connection" as part of its mission, perceived success with outreach, constraints to connecting children with nature, and importance of connecting children with nature. The survey was conducted online using KeySurvey© software. The survey was sent to 604 FWS employees. Responses were received from 320 employees. The respondents represented diversity in regions, tenure, wage/grade level, job series, supervisory status, and involvement with education and outreach activities. The key findings of the survey are as follows: * FWS employees believe they as individuals and the agency are successful now and will be more successful in the future in connecting children with nature. * FWS employees believe that there are many outcomes that are relevant to the FWS objective to connect people

  16. Valuation of Electric Power System Services and Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kintner-Meyer, Michael C. W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Homer, Juliet S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Balducci, Patrick J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Weimar, Mark R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-08-01

    Accurate valuation of existing and new technologies and grid services has been recognized to be important to stimulate investment in grid modernization. Clear, transparent, and accepted methods for estimating the total value (i.e., total benefits minus cost) of grid technologies and services are necessary for decision makers to make informed decisions. This applies to home owners interested in distributed energy technologies, as well as to service providers offering new demand response services, and utility executives evaluating best investment strategies to meet their service obligation. However, current valuation methods lack consistency, methodological rigor, and often the capabilities to identify and quantify multiple benefits of grid assets or new and innovative services. Distributed grid assets often have multiple benefits that are difficult to quantify because of the locational context in which they operate. The value is temporally, operationally, and spatially specific. It varies widely by distribution systems, transmission network topology, and the composition of the generation mix. The Electric Power Research Institute (EPRI) recently established a benefit-cost framework that proposes a process for estimating multiple benefits of distributed energy resources (DERs) and the associated cost. This document proposes an extension of this endeavor that offers a generalizable framework for valuation that quantifies the broad set of values for a wide range of technologies (including energy efficiency options, distributed resources, transmission, and generation) as well as policy options that affect all aspects of the entire generation and delivery system of the electricity infrastructure. The extension includes a comprehensive valuation framework of monetizable and non-monetizable benefits of new technologies and services beyond the traditional reliability objectives. The benefits are characterized into the following categories: sustainability, affordability, and

  17. An Annotated Bibliography of Hypobaric Decompression Sickness Research Conducted at the Crew Technology Division, USAF School of Aerospace Medicine, Brooks AFB, Texas from 1983 to 1988

    Science.gov (United States)

    1990-06-01

    AN ANNOTATED BIBLIOGRAPHY OF HYPOBARIC DECOMPRESSION SICKNESS RESEARCH CONDUCTED AT THE CREW TECHNOLOGY DIVISION, USAF SCHOOL OF AEROSPACE MEDICINE...190 man-flights to four selected altitudes (30000, 27500, 25000, and 22500 ft pressure equivalent) in a hypobaric chamber. The subjects’ ages ranged...conditions and two of these developed delayed sy~rtcms. Three of these five subjects underwent hyperbaric oxygen treatment. Conclusion. Female subjects

  18. Involvement of the ORNL Chemical Technology Division in contaminated air and water handling at the Three Mile Island Nuclear Power Station

    International Nuclear Information System (INIS)

    Brooksbank, R.E.; King, L.J.

    1979-08-01

    The President's Commission on the Accident at Three Mile Island requested that Oak Ridge National Laboratory (ORNL) generate documents concerning two areas in which ORNL personnel provided on-site assistance following the accident on March 28, 1979. These are: instrumentation diagnostics, and the treatment of radioactive wastes and liquid effluents stemming from the accident. This report describes the involvement of the ORNL Chemical Technology Division (CTD) in contaminated air and water handling at Three Mile Island

  19. Quarterly Progress Report for the Chemical and Energy Research Section of the Chemical Technology Division: July-September 1999

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R.T.

    2001-04-16

    This report summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during the period July-September 1999. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications. The report describes the various tasks performed within ten major areas of research: Hot Cell Operations, Process Chemistry, Molten Salt Reactor Experiment (MSRE) Remediation Studies, Chemistry Research, Physical Properties Research, Biochemical Engineering, Separations and Materials Synthesis, Fluid Structures and Properties, Biotechnology Research, and Molecular Studies. The name of a technical contact is included with each task described, and readers are encouraged to contact these individuals if they need additional information. Activities conducted within the area of the Cell Operations involved the testing of two continuously stirred tank reactors in series to evaluate the Savannah River-developed process of small-tank tetraphenylborate precipitation to remove cesium, strontium and transuranics from supernatant. Within the area of Process Chemistry, various topics related to solids formation in process solutions from caustic treatment of Hanford sludge were addressed. Saltcake dissolution efforts continued, including the development of a predictive algorithm. New initiatives for the section included modeling activities centered on detection of hydrogen in {sup 233}U storage wells and wax formation in petroleum mixtures, as well as support for the Spallation Neutron Source (investigation of transmutation products formed during operation). Other activities involved in situ grouting and evaluation of options for use (i.e., as castable shapes) of depleted uranium. In a continuation of activities of the preceding

  20. Cost effectiveness and efficiency in assistive technology service delivery.

    Science.gov (United States)

    Warren, C G

    1993-01-01

    In order to develop and maintain a viable service delivery program, the realities of cost effectiveness and cost efficiency in providing assistive technology must be addressed. Cost effectiveness relates to value of the outcome compared to the expenditures. Cost efficiency analyzes how a provider uses available resources to supply goods and services. This paper describes how basic business principles of benefit/cost analysis can be used to determine cost effectiveness. In addition, basic accounting principles are used to illustrate methods of evaluating a program's cost efficiency. Service providers are encouraged to measure their own program's effectiveness and efficiency (and potential viability) in light of current trends. This paper is meant to serve as a catalyst for continued dialogue on this topic.

  1. Organization structure. Main activities of the Division

    International Nuclear Information System (INIS)

    2008-01-01

    In this chapter the organization structure as well as main activities of the Division for radiation safety, NPP decommissioning and radioactive waste management are presented. This Division of the VUJE, a.s. consists of the following sections and departments: Section for economic and technical services; Section for radiation protection of employees; Department for management of emergency situations and risk assessment; Department for implementation of nuclear power facilities decommissioning and RAW management; Department for personnel and environmental dosimetry; Department for preparation of NPP decommissioning; Department for RAW treatment technologies; Department for chemical regimes and physico-chemical analyses; Department for management of nuclear power facilities decommissioning and RAW management. Main activities of this Division are presented.

  2. Analytical Chemistry Division : annual report (for) 1985

    International Nuclear Information System (INIS)

    Mahadevan, N.

    1986-01-01

    An account of the various activities of the Analytical Chemistry Division of the Bhabha Atomic Research Centre, Bombay, during 1985 is presented. The main function of the Division is to provide chemical analysis support to India's atomic energy programme. In addition, the Division also offers its analytical services, mostly for measurement of concentrations at trace levels to Indian industries and other research organization in the country. A list of these determinations is given. The report also describes the research and development (R and D) activities - both completed and in progress, in the form of individual summaries. During the year an ultra trace analytical laboratory for analysis of critical samples without contamination was set up using indigenous material and technology. Publications and training activities of the staff, training of the staff from other institution, guidance by the staff for post-graduate degree and invited talks by the staff are listed in the appendices at the end of the report. (M.G.B.)

  3. Blockchain technology and its impact on financial and shipping services

    Directory of Open Access Journals (Sweden)

    Viktor Diordiiev

    2018-03-01

    Full Text Available Introduction. Blockchain technology is becoming one of the main drivers of innovation in the global economy. Its adoption will have a huge impact on how businesses and governments operate and on the way people organize their everyday lives. Financial services industry is the one experiencing the biggest impact of the blockchain disruption so far, while financial institutions are among the first adopters of the technology. At the same time, being a relatively traditional industry, shipping has not yet seen many use cases with blockchain, but the technology is able to change this industry dramatically. Aim and tasks. As the industries of finance and shipping have huge potential in the blockchain space and often interact, determining how the blockchain technology adoption can influence the industries of finance and shipping in the future was the main purpose of this article. Research results. To fulfill this purpose, it was important to describe the origins of the blockchain technology, its main characteristics, functioning principles and consensus algorithms. Supported by the recent hype, cryptocurrencies are the biggest use case for blockchain so far, therefore, the article analyzes the largest of them, including Bitcoin, Ethereum and some others, as well as the cryptocurrency market as a whole. The level of worldwide adoption of blockchain and the overall market size are defined further in the article. Various applications in finance are also mentioned, paying particular attention to the insurance industry. Based on this information, the key areas in which blockchain can disrupt finance and insurance are identified. As the number of blockchain companies increases rapidly, the two main fundraising channels for such companies, venture capital and initial coin offering, are analyzed and compared. The ways in which blockchain may impact the shipping services industry are identified further. Conclusion. Afterwards, the article describes a number of

  4. Space assets, technology and services in support of energy policy

    Science.gov (United States)

    Vasko, C. A.; Adriaensen, M.; Bretel, A.; Duvaux-Bechon, I.; Giannopapa, C. G.

    2017-09-01

    Space can be used as a tool by decision and policy makers in developing, implementing and monitoring various policy areas including resource management, environment, transport, security and energy. This paper focuses on the role of space for the energy policy. Firstly, the paper summarizes the European Union's (EU) main objectives in energy policy enclosed in the Energy Strategy 2020-2030-2050 and demonstrates how space assets can contribute to achieving those objectives. Secondly, the paper addresses how the European Space Agency (ESA) has established multiple initiatives and programs that directly finance the development of space assets, technology and applications that deliver services in support of the EU energy policy and sector. These efforts should be continued and strengthened in order to overcome identified technological challenges. The use of space assets, technology and applications, can help achieve the energy policy objectives for the next decades.

  5. Technologies for HIV prevention and care: challenges for health services.

    Science.gov (United States)

    Maksud, Ivia; Fernandes, Nilo Martinez; Filgueiras, Sandra Lucia

    2015-09-01

    This article aims to consider some relevant challenges to the provision of "new prevention technologies" in health services in a scenario where the "advances" in the global response to AIDS control are visible. We take as material for analysis the information currently available on the HIV post-exposure prophylaxis (PEP) and pre-exposure prophylaxis (PrEP), treatment as prevention (TASP) and over the counter. The methodology consisted of the survey and analysis of the Biblioteca Virtual em Saúde (BVS: MEDLINE, LILACS, WHOLIS, PAHO, SciELO) articles that addressed the issue of HIV prevention and care in the context of so-called new prevention technologies. The results of the studies show that there is assistance on the ground of clinics for the treatment of disease responses, but there are several challenges related to the sphere of prevention. The articles list some challenges regarding to management, organization of services and the attention given by health professionals to users. The current context shows evidence of the effectiveness of antiretroviral therapy in reducing the risk of HIV transmission, but the challenges for the provision of preventive technologies in health services permeate health professionals and users in their individual dimensions and health services in organizational and structural dimension. Interventions should be made available in a context of community mobilization; there should be no pressure on people to make HIV testing, antiretroviral treatment or for prevention. In the management is responsible for the training of health professionals to inform, clarify and make available to users, partners and family information about the new antiretroviral use strategies.

  6. Global Budgets and Technology-Intensive Medical Services.

    Science.gov (United States)

    Song, Zirui; Fendrick, A Mark; Safran, Dana Gelb; Landon, Bruce; Chernew, Michael E

    2013-06-01

    In 2009-2010, Blue Cross Blue Shield of Massachusetts entered into global payment contracts (the Alternative Quality contract, AQC) with 11 provider organizations. We evaluated the impact of the AQC on spending and utilization of several categories of medical technologies, including one considered high value (colonoscopies) and three that include services that may be overused in some situations (cardiovascular, imaging, and orthopedic services). Approximately 420,000 unique enrollees in 2009 and 180,000 in 2010 were linked to primary care physicians whose organizations joined the AQC. Using three years of pre-intervention data and a large control group, we analyzed changes in utilization and spending associated with the AQC with a propensity-weighted difference-in-differences approach adjusting for enrollee demographics, health status, secular trends, and cost-sharing. In the 2009 AQC cohort, total volume of colonoscopies increased 5.2 percent (p=0.04) in the first two years of the contract relative to control. The contract was associated with varied changes in volume for cardiovascular and imaging services, but total spending on cardiovascular services in the first two years decreased by 7.4% (p=0.02) while total spending on imaging services decreased by 6.1% (pservices, these decreases were also attributable to shifting care to lower-priced providers. No effect was found in orthopedics. As one example of a large-scale global payment initiative, the AQC was associated with higher use of colonoscopies. Among several categories of services whose value may be controversial, the contract generally shifted volume to lower-priced facilities or services.

  7. ENTERPRISE SERVICES ARCHITECTURE IN THE WORLD OF INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Stefan IOVAN

    2012-05-01

    Full Text Available Enterprise Services Architecture (ESA is blueprint for now enterprise software should be constructed to provide maximum business value. The challenge facing most companies is not whether to adopt Service-Oriented Architecture (SOA, but when and how to do so. There is always a lag between technological vision and business feasibility. It also takes time to fully realize the potential of existing technologies, a process that does not stop the moment the new thing arrives. But when the value of a new approach such as ESA starts to make a difference and produces a competitive advantage, the motivation to change skyrockets. The time to change becomes now and the hunger for learning grows. The goal of this paper is to satisfy the hunger for information for those who suspect that ESA may be a gateway to transforming Information Technology (IT into a strategic weapon. This paper will explain – in more detail that ever before – what ESA is bringing the concept to life in all of its products as a platform supported by an ecosystem.

  8. Impact of bandwidth for various services in heterogeneous network and quality of service via communication technologies in Malaysian higher educational

    OpenAIRE

    Mohd Nazri ISMAIL; Abdullah Mohd ZIN

    2007-01-01

    This study focuses on heterogeneous services and communication technologies for retrieving and sending information between students and lecturers in Malaysian higher educational institutes. It intends to investigate pattern and significant level of various services implementation, convergence of communication technologies and bandwidth capacity for last mile users (students and lecturers). It is designed to determine which communication technologies, services, bandwidth capacity and QoS will ...

  9. Integrating medical, assistive, and universal design products and technologies: Assistive Technology Service Method (ATSM).

    Science.gov (United States)

    Elsaesser, Linda-Jeanne; Bauer, Stephen

    2012-07-01

    ISO26000 provides guidance on effective organizational performance that recognizes social responsibility (including rights of persons with disabilities (PWD)), engages stakeholders, and contributes to sustainable development [1]. Millennium Development Goals 2010 state: while progress has been made, insufficient dedication to sustainable development, and inequalities to the most vulnerable people require attention [2]. World Report on Disability 2011 recommendations includes improved data collection and removal of barriers to rehabilitation that empower PWD [3]. The Assistive Technology Service Method (ATSM), Assistive Technology Device Classification (ATDC) and Matching Person and Technology (MPT) provide an evidence-based, standardized, internationally comparable framework to improve rehabilitation interventions [4-6]. The ATSM and ATDC support universal design (UD) principles and provision of universal technology. The MPT assures interventions are effective and satisfactory to end-users [7]. The ICF conceptual framework and common language are used throughout [8]. Research findings on healthcare needs are translated. ATSM applications in support of these findings are presented. National initiatives demonstrate the need and value of the ATSM as an evidence-based, user-centric, interdisciplinary method to improve individual and organizational performance for rehabilitation [including AT] services. Two Disability & Rehabilitation: Assistive Technology articles demonstrate ATSM and ATDC use to strengthen rehabilitation services and integrate Universal Design principles for socially responsible behavior.

  10. Hydrocarbon technology - advanced technological services. 1. An investigation of possibilities for providing the oil industry with Danish advanced technological services

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    In the next 20 years there can be expected overwhelming developments in exploration and recovery of raw materials on the Danish territory. The present report surveys possibilities of advanced technology transfer from scientific institutions to the petroleum and gas industry. New marketing methods will be necessary for commercialization of the Danish knowhow in technology and management. Creation of a new petroleum industry institute is recommended.

  11. Elementary Education Pre-Service Teachers' Development of Mathematics Technology Integration Skills in a Technology Integration Course

    Science.gov (United States)

    Polly, Drew

    2015-01-01

    Preparing pre-service teachers to effectively integrate technology in the classroom requires rich experiences that deepen their knowledge of technology, pedagogy, and content and the intersection of these aspects. This study examined elementary education pre-service teachers' development of skills and knowledge in a technology integration course…

  12. Quarterly progress report for the Chemical and Energy Research Section of the Chemical Technology Division: January-March 1999

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R.T.

    1999-11-01

    This reports summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during the period January--March 1999. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications. The report describes the various tasks performed within eight major areas of research: Hot Cell Operations, Process Chemistry and Thermodynamics, Molten Salt Reactor Experiment (MSRE) Remediation Studies, Chemistry Research, Separations and Materials Synthesis, Fluid Structure and Properties, Biotechnology Research, and Molecular Studies. The name of a technical contact is included with each task described, and readers are encouraged to contact these individuals if they need additional information. Activities conducted within the area of Hot Cell Operations included column loading of cesium from Melton Valley Storage Tank supematants using an engineered form of crystalline silicotitanate. A second task was to design and construct a continuously stirred tank reactor system to test the Savannah River-developed process of small-tank tetraphenylborate precipitation to remove cesium, strontium, and transuranics from supematant. Within the area of Process Chemistry and Thermodynamics, the problem of solids formation in process solutions from caustic treatment of Hanford sludge was addressed, including issues such as pipeline plugging and viscosity measurements. Investigation of solution conditions required to dissolve Hanford saltcake was also continued. MSRE Remediation Studies focused on recovery of {sup 233}U and its transformation into a stable oxide and radiolysis experiments to permit remediation of MSRE fuel salt. In the area of Chemistry Research, activities included studies relative to molecular imprinting for

  13. 18 MArch 2008 - Director, Basic and Generic Research Division, Research Promotion Bureau, Japanese Ministry of Education, Culture, Sports, Science and Technology Prof.Ohtake visiting ATLAS cavern with Spokesperson P. Jenni.

    CERN Multimedia

    Maximilien Brice

    2008-01-01

    18 MArch 2008 - Director, Basic and Generic Research Division, Research Promotion Bureau, Japanese Ministry of Education, Culture, Sports, Science and Technology Prof.Ohtake visiting ATLAS cavern with Spokesperson P. Jenni.

  14. A new mechanism for energy conservation technology services

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Feng

    1996-12-31

    In the ninth-five year plan of China, the socialist market economy model will be developed. In the stage of transferring from planning economy to market economy, the energy conservation technology services industry in China has met new challenges. Over the past ten to fifteen years, there has developed a new mechanism for financing energy efficiency investments in market economies. The process is simple. After inspecting an enterprise or an entity for energy saving opportunities, an Energy Service Company (ESCO) which business aimed at making money will review the recommended energy conservation opportunities with the enterprise or the entity (user) and implement those measures acceptable to the user at no front end cost to the user. The ESCO then guarantees that the energy savings will cover the cost of the capital renovations using the Performance Contracting.

  15. Using Technology to Improve Access to Mental Health Services.

    Science.gov (United States)

    Cortelyou-Ward, Kendall; Rotarius, Timothy; Honrado, Jed C

    Mental ill-health is a public health threat that is prevalent throughout the United States. Tens of millions of Americans have been diagnosed along the continuum of mental ill-health, and many more millions of family members and friends are indirectly affected by the pervasiveness of mental ill-health. Issues such as access and the societal stigma related to mental health issues serve as deterrents to patients receiving their necessary care. However, technological advances have shown the potential to increase access to mental health services for many patients.

  16. 31 CFR 575.205 - Prohibited exportation and reexportation of goods, technology, or services to Iraq.

    Science.gov (United States)

    2010-07-01

    ... reexportation of goods, technology, or services to Iraq. 575.205 Section 575.205 Money and Finance: Treasury... goods, technology, or services to Iraq. Except as otherwise authorized, no goods, technology (including technical data or other information), or services may be exported from the United States, or, if subject to...

  17. 75 FR 43555 - Experian, Global Technology Services, a Subsidiary of Experian, Including a Leased Employee From...

    Science.gov (United States)

    2010-07-26

    ... Technology Services, a Subsidiary of Experian, Including a Leased Employee From Tapfin Working Off-Site in... Experian, Global Technology Services, a subsidiary of Experian, including on-site leased workers from... control of the Schaumburg, Illinois location of Experian, Global Technology Services, a subsidiary of...

  18. 31 CFR 560.206 - Prohibited trade-related transactions with Iran; goods, technology, or services.

    Science.gov (United States)

    2010-07-01

    ... with Iran; goods, technology, or services. 560.206 Section 560.206 Money and Finance: Treasury... Iran; goods, technology, or services. (a) Except as otherwise authorized pursuant to this part, and... services of Iranian origin or owned or controlled by the Government of Iran; or (2) Goods, technology, or...

  19. 47 CFR 51.230 - Presumption of acceptability for deployment of an advanced services loop technology.

    Science.gov (United States)

    2010-10-01

    ... an advanced services loop technology. 51.230 Section 51.230 Telecommunication FEDERAL COMMUNICATIONS... Carriers § 51.230 Presumption of acceptability for deployment of an advanced services loop technology. (a) An advanced services loop technology is presumed acceptable for deployment under any one of the...

  20. 16 CFR 1000.23 - Office of Information and Technology Services.

    Science.gov (United States)

    2010-01-01

    ... COMMISSION ORGANIZATION AND FUNCTIONS § 1000.23 Office of Information and Technology Services. The Office of Information and Technology Services houses the Commission's Secretariat, which facilitates the preparation of... agency's Chief Freedom of Information Act Officer. The Office of Information and Technology Services is...

  1. 42 CFR 412.87 - Additional payment for new medical services and technologies: General provisions.

    Science.gov (United States)

    2010-10-01

    ... payment for new medical services and technologies: General provisions. (a) Basis. Sections 412.87 and 412... establish a mechanism to recognize the costs of new medical services and technologies under the hospital... that are new medical services and technologies, if the following conditions are met: (1) A new medical...

  2. 47 CFR 22.409 - Developmental authorization for a new Public Mobile Service or technology.

    Science.gov (United States)

    2010-10-01

    ... Mobile Service or technology. 22.409 Section 22.409 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES PUBLIC MOBILE SERVICES Developmental Authorizations § 22.409 Developmental authorization for a new Public Mobile Service or technology. The FCC may grant applications for...

  3. 42 CFR 412.88 - Additional payment for new medical service or technology.

    Science.gov (United States)

    2010-10-01

    ... for new medical service or technology. (a) For discharges involving new medical services or... medical service or technology. [66 FR 46924, Sept. 7, 2001, as amended at 67 FR 50111, Aug. 1, 2002; 69 FR... 42 Public Health 2 2010-10-01 2010-10-01 false Additional payment for new medical service or...

  4. VPLS: an effective technology for building scalable transparent LAN services

    Science.gov (United States)

    Dong, Ximing; Yu, Shaohua

    2005-02-01

    Virtual Private LAN Service (VPLS) is generating considerable interest with enterprises and service providers as it offers multipoint transparent LAN service (TLS) over MPLS networks. This paper describes an effective technology - VPLS, which links virtual switch instances (VSIs) through MPLS to form an emulated Ethernet switch and build Scalable Transparent Lan Services. It first focuses on the architecture of VPLS with Ethernet bridging technique at the edge and MPLS at the core, then it tries to elucidate the data forwarding mechanism within VPLS domain, including learning and aging MAC addresses on a per LSP basis, flooding of unknown frames and replication for unknown, multicast, and broadcast frames. The loop-avoidance mechanism, known as split horizon forwarding, is also analyzed. Another important aspect of VPLS service is its basic operation, including autodiscovery and signaling, is discussed. From the perspective of efficiency and scalability the paper compares two important signaling mechanism, BGP and LDP, which are used to set up a PW between the PEs and bind the PWs to a particular VSI. With the extension of VPLS and the increase of full mesh of PWs between PE devices (n*(n-1)/2 PWs in all, a n2 complete problem), VPLS instance could have a large number of remote PE associations, resulting in an inefficient use of network bandwidth and system resources as the ingress PE has to replicate each frame and append MPLS labels for remote PE. So the latter part of this paper focuses on the scalability issue: the Hierarchical VPLS. Within the architecture of HVPLS, this paper addresses two ways to cope with a possibly large number of MAC addresses, which make VPLS operate more efficiently.

  5. The provision of assistive technology products and services for people with dementia in the United Kingdom.

    Science.gov (United States)

    Gibson, Grant; Newton, Lisa; Pritchard, Gary; Finch, Tracy; Brittain, Katie; Robinson, Louise

    2016-07-01

    In this review we explore the provision of assistive technology products and services currently available for people with dementia within the United Kingdom. A scoping review of assistive technology products and services currently available highlighted 171 products or product types and 331 services. In addition, we assimilated data on the amount and quality of information provided by assistive technology services alongside assistive technology costs. We identify a range of products available across three areas: assistive technology used 'by', 'with' and 'on' people with dementia. Assistive technology provision is dominated by 'telecare' provided by local authorities, with services being subject to major variations in pricing and information provision; few currently used available resources for assistive technology in dementia. We argue that greater attention should be paid to information provision about assistive technology services across an increasingly mixed economy of dementia care providers, including primary care, local authorities, private companies and local/national assistive technology resources. © The Author(s) 2014.

  6. Technology Integration Coursework and Finding Meaning in Pre-Service Teachers' Reflective Practice

    Science.gov (United States)

    Kimmons, Royce; Miller, Brant G.; Amador, Julie; Desjardins, Christopher David; Hall, Cassidy

    2015-01-01

    This study seeks to inform teacher preparation programs regarding technology integration by understanding (1) relationships between tasks with specific technologies and pre-service teachers' critical thinking about technology integration and (2) relationships between how pre-service teachers are critically thinking about technology integration and…

  7. Preparing Pre-Service Teachers to Integrate Technology into K-12 Instruction: Evaluation of a Technology-Infused Approach

    Science.gov (United States)

    Admiraal, Wilfried; van Vugt, Felix; Kranenburg, Frans; Koster, Bob; Smit, Ben; Weijers, Sanne; Lockhorst, Ditte

    2017-01-01

    The quality of how technology is addressed in teacher education programmes is conditional for how student teachers apply technology in secondary schools after their graduation. Two technology-infused courses of one teacher education programme were evaluated. In line with studies on the development of pre-service teachers' technological,…

  8. Report on the joint meeting of the Division of Development and Technology Plasma/Wall Interaction and High Heat Flux Materials and Components Task Groups

    International Nuclear Information System (INIS)

    Wilson, K.L.

    1985-10-01

    This report of the Joint Meeting of the Division of Development and Technology Plasma/Wall Interaction and High Heat Flux Materials and Components Task Groups contains contributing papers in the following areas: Plasma/Materials Interaction Program and Technical Assessment, High Heat Flux Materials and Components Program and Technical Assessment, Pumped Limiters, Ignition Devices, Program Planning Activities, Compact High Power Density Reactor Requirements, Steady State Tokamaks, and Tritium Plasma Experiments. All these areas involve the consideration of High Heat Flux on Materials and the Interaction of the Plasma with the First Wall. Many of the Test Facilities are described as well

  9. Division of Development and Technology Plasma/Materials Interaction and High Heat Flux Materials and Components Task Groups: Report on the joint meeting, July 9, 1986

    International Nuclear Information System (INIS)

    Watson, R.D.

    1986-09-01

    This paper contains a collection of viewgraphs from a joint meeting of the Division of Development and Technology Plasma/Materials Interaction and High Heat Flux Materials and Components Task Groups. A list of contributing topics is: PPPL update, ATF update, Los Alamos RFP program update, status of DIII-D, PMI graphite studies at ORNL, PMI studies for low atomic number materials, high heat flux materials issues, high heat flux testing program, particle confinement in tokamaks, helium self pumping, self-regenerating coatings technical planning activity and international collaboration update

  10. Augmenting Space Technology Program Management with Secure Cloud & Mobile Services

    Science.gov (United States)

    Hodson, Robert F.; Munk, Christopher; Helble, Adelle; Press, Martin T.; George, Cory; Johnson, David

    2017-01-01

    The National Aeronautics and Space Administration (NASA) Game Changing Development (GCD) program manages technology projects across all NASA centers and reports to NASA headquarters regularly on progress. Program stakeholders expect an up-to-date, accurate status and often have questions about the program's portfolio that requires a timely response. Historically, reporting, data collection, and analysis were done with manual processes that were inefficient and prone to error. To address these issues, GCD set out to develop a new business automation solution. In doing this, the program wanted to leverage the latest information technology platforms and decided to utilize traditional systems along with new cloud-based web services and gaming technology for a novel and interactive user environment. The team also set out to develop a mobile solution for anytime information access. This paper discusses a solution to these challenging goals and how the GCD team succeeded in developing and deploying such a system. The architecture and approach taken has proven to be effective and robust and can serve as a model for others looking to develop secure interactive mobile business solutions for government or enterprise business automation.

  11. Service quality and perceived value of technology-based service encounters: evaluation of clinical staff satisfaction in Taiwan.

    Science.gov (United States)

    Hung, Chung-Jye; Chang, Hsin Hsin; Eng, Cheng Joo; Wong, Kit Hong

    Previous research has evaluated technology-based service encounters (TBSEs) in the delivery of health care by assessing patient satisfaction. This study examined service quality and perceived value of TBSEs used in health organisations from the perspective of clinical staff, with staff technology readiness as a moderator. A quantitative survey was conducted in Taiwan, across private and public healthcare organisations. Results showed that TBSEs had a direct effect on service quality and perceived value, which in turn had a direct effect on staff satisfaction in using TBSEs. However, service quality had no effect on perceived value when moderated by technology readiness. Theoretical and managerial implications of these findings are discussed.

  12. Joint Small Arms Technology Development Strategy for Joint Service Small Arms Science and Technology Investments

    Science.gov (United States)

    2016-01-26

    reduction efforts that need to be led by the Joint Services include One Way Luminescence, where the improvement in hit goes up for the follow on shots...new technology would enable spectral segment defeat, ranging from ultraviolet ( UV ), visible, Infrared (IR), radar, and radio and any combinations...program of work as directed via the Land Armaments Management Plan ( LAMP ) and advise the NAAG on systems and equipment aspects of dismounted operations

  13. Definition of technology development missions for early space station satellite servicing, volume 2

    Science.gov (United States)

    1983-01-01

    The results of all aspects of the early space station satellite servicing study tasks are presented. These results include identification of servicing tasks (and locations), identification of servicing mission system and detailed objectives, functional/operational requirements analyses of multiple servicing scenarios, assessment of critical servicing technology capabilities and development of an evolutionary capability plan, design and validation of selected servicing technology development missions (TDMs), identification of space station satellite servicing accommodation needs, and the cost and schedule implications of acquiring both required technology capability development and conducting the selected TDMs.

  14. RANCANGAN INFORMATION TECHNOLOGY SERVICE MANAGEMENT MENGGUNAKAN INFORMATION TECHNOLOGY INFRASTRUCTURE LIBRARY (Studi Kasus: STMIK AMIKOM Purwokerto

    Directory of Open Access Journals (Sweden)

    Nurfaizah Nurfaizah

    2015-08-01

    Full Text Available STMIK AMIKOM Purwokerto merupakan salah satu perguruan tinggi swasta yang dalam proses pengelolaan dan  penyampaian informasi telah menerapan teknologi informasi. Proses pelayanan suatu perguruan tinggi dipandang sebagai suatu solusi yang nantinya dapat meningkatkan kemampuan perusahaan di dalam pelayanan. Hal ini menyebabkan pentingnya peningkatan peran teknologi informasi agar selaras dengan  investasi baik hardware dan software yang dikeluarkan, sehingga dibutuhkan perencanaan yang optimal.IT Service Management (ITSM digunakan sebagai upaya untuk meningkatkan efisiensi pelayanan teknologi informasi kepada pengguna yang terdapat dalam framework Information Technology Infrastructure Library.Diharapkan dengan penerapan ITSM pengelolaan layanan TI menjadi lebih baik serta mampu menyelesaikan beberapa permasalahan yang ada pada organisasiyang sedang berjalan dengan menggunakan COBIT 4.1. ITSM menghasilkan perancangan pada masing-masing prosesnya dari 2 domain pembangun ITSM yaitu domain service support dan service delivery. Kata Kunci: ITSM, ITIL V3, COBIT 4.1

  15. The Integration of Synchronous Communication Technology into Service Learning for Pre-Service Teachers' Online Tutoring of Middle School Students

    Science.gov (United States)

    Chen, Chao-Hsiu; Liao, Chen-Hung; Chen, Yi-Chieh; Lee, Chen-Feng

    2011-01-01

    To well prepare pre-service teachers for their future teaching, researchers and teacher-educators have been employing information and communication technology to improve pre-service teachers' learning of subject-matter knowledge, pedagogies, classroom-management skills, and so on. This study illustrates a service-learning project we conducted to…

  16. PNAUM: integrated approach to Pharmaceutical Services, Science, Technology and Innovation.

    Science.gov (United States)

    Gadelha, Carlos Augusto Grabois; Costa, Karen Sarmento; Nascimento, José Miguel do; Soeiro, Orlando Mário; Mengue, Sotero Serrate; Motta, Márcia Luz da; Carvalho, Antônio Carlos Campos de

    2016-12-01

    This paper describes the development process of the Pesquisa Nacional sobre Acesso, Utilização e Promoção do Uso Racional de Medicamentos (PNAUM - National Survey on Access, Use and Promotion of Rational Use of Medicines) based on an integrated approach to pharmaceutical services, science, technology and innovation. It starts by contextualizing health and development in Brazil and features elements of the National Policy for Science, Technology and Innovation in Health in Brazil and the National Policy for Pharmaceutical Services. On presenting pharmaceutical policy guidelines, it stresses the lack of nationwide data. This survey, commissioned by the Brazilian Ministry of Health, has two components: household survey and evaluation of pharmaceutical services in primary care. The findings point to perspectives that represent, besides the enhancement of public policy for pharmaceutical services and public health, results of government action aimed at developing the economic and industrial health care complex to improve the health conditions of the Brazilian population. RESUMO O artigo apresenta o processo de construção da Pesquisa Nacional sobre Acesso, Utilização e Promoção do Uso Racional de Medicamento a partir de uma concepção integradora da Assistência Farmacêutica, Ciência, Tecnologia e Inovação. Inicia-se contextualizando a saúde e o desenvolvimento no País e apresenta elementos da Política Nacional de Ciência Tecnologia e Inovação em Saúde no Brasil e da Política Nacional de Assistência Farmacêutica. Ao apresentar as diretrizes das Políticas Farmacêuticas, destaca-se a carência de dados de abrangência nacional. A presente pesquisa, encomendada pelo Ministério da Saúde, foi estruturada em dois componentes: inquérito domiciliar e avaliação dos serviços de assistência farmacêutica na atenção básica. As perspectivas dos resultados representam, além do incremento das políticas públicas farmacêuticas e de saúde p

  17. AREVA Technical Days (ATD) session 3: operations of the reactors and services division, technical and economic aspects

    International Nuclear Information System (INIS)

    2003-01-01

    These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This third session deals with the reactors technologies basics, the EPR and SWR 1000 issues and outlook, the nuclear systems of the future, the business opportunities and business models. (A.L.B.)

  18. Assessment of Patients’ Perception of Telemedicine Services Using the Service User Technology Acceptability Questionnaire

    Directory of Open Access Journals (Sweden)

    Claudio Dario

    2016-06-01

    Full Text Available Introduction: The purpose of this paper is to assess if similar telemedicine services integrated in the management of different chronic diseases are acceptable and well perceived by patients or if there are any negative perceptions. Theory and methods: Participants suffering from different chronic diseases were enrolled in Veneto Region and gathered into clusters. Each cluster received a similar telemedicine service equipped with different disease-specific measuring devices. Participants were patients with diabetes (n = 163, chronic obstructive pulmonary disease (n = 180, congestive heart failure (n = 140 and Cardiac Implantable Electronic Devices (n = 1635. The Service User Technology Acceptability Questionnaire (SUTAQ was initially translated, culturally adapted and pretested and subsequently used to assess patients’ perception of telemedicine. Data were collected after 3 months and after 12 months from the beginning of the intervention. Data for patients with implantable devices was collected only at 12 months. Results: Results at 12 months for all clusters are similar and assessed a positive perception of telemedicine. The SUTAQ results for clusters 2 (diabetes, 5 (COPD and 7 (CHF after 3 months of intervention were confirmed after 12 months. Conclusions: Telemedicine was perceived as a viable addition to usual care. A positive perception for telemedicine services isn’t a transitory effect, but extends over the course of time.

  19. Assessment of Patients' Perception of Telemedicine Services Using the Service User Technology Acceptability Questionnaire.

    Science.gov (United States)

    Dario, Claudio; Luisotto, Elena; Dal Pozzo, Enrico; Mancin, Silvia; Aletras, Vassilis; Newman, Stanton; Gubian, Lorenzo; Saccavini, Claudio

    2016-06-01

    The purpose of this paper is to assess if similar telemedicine services integrated in the management of different chronic diseases are acceptable and well perceived by patients or if there are any negative perceptions. Participants suffering from different chronic diseases were enrolled in Veneto Region and gathered into clusters. Each cluster received a similar telemedicine service equipped with different disease-specific measuring devices. Participants were patients with diabetes (n = 163), chronic obstructive pulmonary disease (n = 180), congestive heart failure (n = 140) and Cardiac Implantable Electronic Devices (n = 1635). The Service User Technology Acceptability Questionnaire (SUTAQ) was initially translated, culturally adapted and pretested and subsequently used to assess patients' perception of telemedicine. Data were collected after 3 months and after 12 months from the beginning of the intervention. Data for patients with implantable devices was collected only at 12 months. Results at 12 months for all clusters are similar and assessed a positive perception of telemedicine. The SUTAQ results for clusters 2 (diabetes), 5 (COPD) and 7 (CHF) after 3 months of intervention were confirmed after 12 months. Telemedicine was perceived as a viable addition to usual care. A positive perception for telemedicine services isn't a transitory effect, but extends over the course of time.

  20. The rise and fall of self-service in Amsterdam trams: User technology relations in a case of service innovation

    NARCIS (Netherlands)

    Nahuis, Roel

    2009-01-01

    The stabilisation of innovative technology depends on reconciling technological opportunities and user behaviour. This can be achieved by adjusting the technology to the users, by configuring the user, or by a combination thereof. This paper evaluates different strategies in a case of service

  1. Pre-service teachers' competencies for technology integration: Insights from a mathematics-specific instructional technology course

    NARCIS (Netherlands)

    Agyei, D.D.; Voogt, Joke; Resta, P.

    2012-01-01

    A combination of various measures (self-report, learning outcomes and written reports) was employed to investigate 104 pre-service teachers’ competencies in spreadsheet integration after enrolling in an Instructional Technology course. The pre-service teachers engaged in a “learning technology by

  2. Examining the Impact of Educational Technology Courses on Pre-Service Teachers' Development of Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Hsu, Pi-Sui

    2012-01-01

    The purpose of this qualitative study was to examine the impact of educational technology courses on pre-service teachers' development of knowledge of technology integration in a teacher preparation program in the USA. The present study was conducted with eight pre-service teachers enrolled in the elementary teacher education program at a large…

  3. Swiss and Turkish Pre-Service Science Teachers' Anxiety Levels for Educational Technology

    Science.gov (United States)

    Efe, Hulya Aslan; Efe, Rifat

    2016-01-01

    This study aims to culturally explain pre-service science teachers' instructional technology-related anxiety levels by analyzing the variables of their instructional technology using experiences, frequency of using instructional technologies, access to instructional technologies, instructional technology-related attitude and their instructional…

  4. 78 FR 37586 - TE Connectivity, CIS-Appliances Division, Including On-Site Leased Workers From Kelly Services...

    Science.gov (United States)

    2013-06-21

    ... supply of administrative support services (in support of production). The worker group includes on-site... components produced by the subject workers. Further, aggregate imports of articles like or directly... reconsideration, the worker supplied new information regarding a possible shift in the production of like or...

  5. Definition of technology development missions for early space station satellite servicing, volume 1

    Science.gov (United States)

    1983-01-01

    The testbed role of an early manned space station in the context of a satellite servicing evolutionary development and flight demonstration technology plan which results in a satellite servicing operational capability is defined. A satellite servicing technology development mission (a set of missions) to be performed on an early manned space station is conceptually defined.

  6. 31 CFR 539.201 - Prohibited importation of goods, technology, or services.

    Science.gov (United States)

    2010-07-01

    ..., technology, or services. 539.201 Section 539.201 Money and Finance: Treasury Regulations Relating to Money... date, directly or indirectly, of any goods, technology, or services produced or provided by a... DESTRUCTION TRADE CONTROL REGULATIONS Prohibitions § 539.201 Prohibited importation of goods, technology, or...

  7. 31 CFR 538.205 - Prohibited exportation and reexportation of goods, technology, or services to Sudan.

    Science.gov (United States)

    2010-07-01

    ... reexportation of goods, technology, or services to Sudan. 538.205 Section 538.205 Money and Finance: Treasury... goods, technology, or services to Sudan. Except as otherwise authorized, the exportation or reexportation, directly or indirectly, to Sudan of any goods, technology (including technical data, software, or...

  8. Teaching for Application: A Model for Assisting Pre-Service Teachers with Technology Integration

    Science.gov (United States)

    Hur, Jung Won; Cullen, Theresa; Brush, Thomas

    2010-01-01

    The purpose of this paper is to introduce a technology integration model designed to assist pre-service teachers to learn meaningful uses of technology in K-12 classrooms. Based on studies in teacher education, learning theory, and technology integration, the authors define five essential characteristics necessary for pre-service teacher…

  9. Identifying Ghanaian Pre-Service Teachers' Readiness for Computer Use: A Technology Acceptance Model Approach

    Science.gov (United States)

    Gyamfi, Stephen Adu

    2016-01-01

    This study extends the technology acceptance model to identify factors that influence technology acceptance among pre-service teachers in Ghana. Data from 380 usable questionnaires were tested against the research model. Utilising the extended technology acceptance model (TAM) as a research framework, the study found that: pre-service teachers'…

  10. Using assistive technology services at differing levels of care: healthy older couples' perceptions.

    Science.gov (United States)

    Harrefors, Christina; Axelsson, Karin; Sävenstedt, Stefan

    2010-07-01

    The aim of the study was to describe healthy older couples' perceptions of using assistive technology services when needing assistance with care. The use of information technology-based assistive technology services in elder care has increased as a result of an increase of care performed in private homes. The use of assistive technology services in care of older people at home has been evaluated as something positive by patients, relatives and nursing staff, while as resistance to their increased use has also been noted. Twelve healthy couples, aged over 70 years, from northern Sweden were interviewed in 2005 about their perceptions of using assistive technology services in the case of being in need of assistance with personal care. Open, individual semi-structured interviews supported by written vignettes describing three levels of caring needs were used and the data analysed with content analysis. The findings were interpreted as one main theme with three categories: Asset or threat depends on caring needs and abilities. Three categories were identified within the theme: Assistive technology services provide an opportunity; The consequences of using assistive technology services are hard to anticipate; and Fear of assistive technology services when completely dependent on care. Trust and security in the care of older people who are severely ill, dependent on care and living at home should be a hallmark in using assistive technology services. Human presence is an important dimension and must be considered when developing concepts for use of assistive technology services.

  11. Interactive Information Service Technology of Tea Industry Based on Demand-Driven

    OpenAIRE

    Shi , Xiaohui; Chen , Tian’en

    2013-01-01

    International audience; Information service technology is a bridge between user and information resource, also is the critical factor to weight the quality of information service. Focusing on the information service features of tea industry, the demand-driven and interaction of information service were emphasized in this paper. User and market as the major criterion for testing the quality of information service, the interactive information service mode based on the demand-driven was proposed...

  12. Impact of bandwidth for various services in heterogeneous network and quality of service via communication technologies in Malaysian higher educational

    Directory of Open Access Journals (Sweden)

    Mohd Nazri ISMAIL

    2007-12-01

    Full Text Available This study focuses on heterogeneous services and communication technologies for retrieving and sending information between students and lecturers in Malaysian higher educational institutes. It intends to investigate pattern and significant level of various services implementation, convergence of communication technologies and bandwidth capacity for last mile users (students and lecturers. It is designed to determine which communication technologies, services, bandwidth capacity and QoS will achieve the highest level acceptance in Malaysian higher educational institutes. Heterogeneous environment can also generate mobility approaches. A survey method is used to collect data from respondents (System Network Administrator in Malaysian higher educational institutes. Statistical Analysis using t-test shows that implementation of high speed bandwidth for Internet (WAN achieved significant level. Frequency test are used to analyze the various services implementation via convergence of communication technologies in heterogeneous environment for retrieving information. The most apparent finding of this study is that various services implementation in higher educational institutes can affect convergence of communication technologies usage in accessing information over heterogeneous network environment between students and lecturers. The study or analysis confirms that Malaysia higher educational institutes have not achieved a maximum level of various services implementation via convergence of communication technologies between students and lecturers in heterogeneous network environment. Therefore, low convergence of communication technologies can produce a low mobility and ubiquitous interaction between students and lectures in Malaysian higher educational institutes.

  13. Self-Service Charge Systems: Current Technological Applications and Their Implications for the Future Library.

    Science.gov (United States)

    Mardikian, Jackie

    1995-01-01

    Discusses a possible shift to self-service check-out systems for academic library patrons. Provides an annotated bibliography of 51 items that discuss the impact of self-service technology on the quality of service and customer satisfaction in libraries, service sectors, banking, and the vending industry. (LRW)

  14. Impact of information and communications technologies on residental customer energy services

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, C.; Kempton, W.; Eide, A.; Iyer, M. [and others

    1996-10-01

    This study analyzes the potential impact of information and communications technologies on utility delivery of residential customer energy services. Many utilities are conducting trials which test energy-related and non-energy services using advanced communications systems.

  15. Measuring patrons' technology habits: an evidence-based approach to tailoring library services.

    Science.gov (United States)

    Wu, Jin; Chatfield, Amy J; Hughes, Annie M; Kysh, Lynn; Rosenbloom, Megan Curran

    2014-04-01

    Librarians continually integrate new technologies into library services for health sciences students. Recently published data are lacking about student ownership of technological devices, awareness of new technologies, and interest in using devices and technologies to interact with the library. A survey was implemented at seven health sciences libraries to help answer these questions. Results show that librarian assumptions about awareness of technologies are not supported, and student interest in using new technologies to interact with the library varies widely. Collecting this evidence provides useful information for successfully integrating technologies into library services.

  16. Investigating the Information Technology Courses for Pre-service and In-service English Teachers in Hong Kong

    Directory of Open Access Journals (Sweden)

    Chi Cheung Ruby Yang

    2011-07-01

    Full Text Available This paper focuses on the views of twenty-six pre-service and eight in-service English teachers in Hong Kong concerning the information technology courses in their teacher education programmes. The findings of the study show that while both software applications and technological integration in teaching are highlighted in the course outline, the instructor focused more on the application aspect, with the technology integration being less emphasised. Another important finding is that PowerPoint was still the most commonly used application in teaching. Likewise, usually the involved pre-service and in-service teachers just simply used different computer applications as alternatives to traditional teaching resources. This may reflect the fact that the information technology courses are not adequate to prepare teachers to teach with it.

  17. Quality control and in-service inspection technology for hybrid-composite girder bridges.

    Science.gov (United States)

    2014-08-01

    This report describes efforts to develop quality control tools and in-service inspection technologies for the fabrication and construction of Hybrid Composite Beams (HCBs). HCBs are a new bridge technology currently being evaluated by the Missouri De...

  18. IFLA General Conference, 1989. Division of Libraries Serving the General Public. Section on Library Services to Multicultural Populations; Round Table--International Association of Metropolitan City Libraries; Round Table on Mobile Libraries. Booklet 31.

    Science.gov (United States)

    International Federation of Library Associations, The Hague (Netherlands).

    The seven papers in this collection continue the presentations from the Division of Libraries Serving the General Public: (1) "Multicultural Activities for Children and Young People at the Munich International Youth Library" (German and English versions; Lioba Betten); (2) "Multicultural Literature and Library Services for Children:…

  19. Technology review of commercial food service equipment - final report

    Energy Technology Data Exchange (ETDEWEB)

    Rahbar, S; Krsikapa, S [Canadian Gas Research Inst., Don Mills, ON (Canada); Fisher, D; Nickel, J; Ardley, S; Zabrowski, D [Fisher Consultants (Canada); Barker, R F [ed.

    1996-05-15

    Market and technical information on gas fired equipment used in the commercial food service sector in Canada and in each province or territory was presented. Results of a market study and technology review were integrated to establish energy consumption and energy saving potential in this sector. Eight categories of commercial cooking appliances were studied. They were: fryers, griddles, broilers, ranges, ovens, tilting skillets, steam kettles and steamers. Focus was on gas fired appliances, although electric appliances were also included. The total energy consumption of the appliances was estimated at 76,140.37 GBtu in 1994. Gas appliances accounted for 63 per cent of the total inventory and consumed 83 per cent of the total energy used. Cooking energy efficiencies for the gas fired commercial cooking equipment ranged from 10 per cent to 60 per cent. The electric appliances had cooking energy efficiencies ranging from 35 per cent to 95 per cent. A list of recommendations were made for the many opportunities to introduce higher efficiency commercial cooking appliances, essential to slow down or to stabilize the energy consumption of cooking appliances over the next decade. 66 refs., 14 tabs., 18 figs.

  20. Technology Development, Implementation, and Assessment: K-16 Pre-Service, In-Service, and Distance Learning Initiatives

    Science.gov (United States)

    Petersen, Richard

    1998-01-01

    This summer 22 kindergarten through 8th grade teachers attended a 3-week Teacher Enhancement Institute (TEI) at NASA Langley Research Center. TEI is funded by NASA Education Division and is a collaborative effort between NASA Langley's Office of Education and Christopher Newport University. Selected teacher teams were drawn from Langley's 5-state precollege service region, which includes Kentucky, North Carolina, South Carolina, Virginia, and West Virginia. The goal of TEI was for teachers to learn aeronautics and the broad application of science and technology through a problem-based learning (PBL) strategy. PBL is an instructional method using a real world problem, also known as an ill-structured problem, as the context for an in-depth investigation. Most real life problems are ill-structured, as are all the really important social, political and scientific problems. The teachers were immediately immersed in an ill-structured problem to design a communication strategy for the White House Commission on Aviation Safety and Security to educate and disseminate aviation information to the general public. Specifically, the communication strategy was to focus on aeronautics principles, technology and design associated with US general aviation revitalization and aviation safety programs. The presented problem addressed NASA's strategic outcome to widely communicate the content, relevancy and excitement of its missions and discoveries to the general population. Further, the PBL scenario addressed the technological challenges being taken up by NASA to revolutionize air travel and the way in which aircraft are designed, built, and operated. It also addressed getting people and freight safely and efficiently to any location in the world at a reasonable cost. With a "real" need-to-know problem facing them, the teachers set out to gather information and to better understand the problem using inquiry-based and scientific methods. The learning in this aeronautics scenario was

  1. Chemical Technology Division progress report for the period April 1, 1981-March 31, 1983. [Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1983-09-01

    Separate abstracts were prepared for eight sections of the report: nuclear waste management; fossil energy; basic science and technology; biotechnology and environmental programs; transuranium-element processing; Nuclear Regulatory Commission programs; Three Mile Island support studies; and miscellaneous programs.

  2. E-Division semiannual report. Progress report, July 1--December 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, P.A. (comp.)

    1979-01-01

    The status of the programs and projects of the Electronics Division for the period July through December 1978 is reported. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support Branch is to apply advanced technology to Laboratory and material problems. The primary goal of the Technical Services Branch is to provide a technical base and support for Laboratory programs. Most of the individual reports are quite short.

  3. E-Division semiannual report. Progress report, July 1--December 31, 1978

    International Nuclear Information System (INIS)

    Kelley, P.A.

    1979-01-01

    The status of the programs and projects of the Electronics Division for the period July through December 1978 is reported. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support Branch is to apply advanced technology to Laboratory and material problems. The primary goal of the Technical Services Branch is to provide a technical base and support for Laboratory programs. Most of the individual reports are quite short

  4. How displaced communities use technology to access financial services

    Directory of Open Access Journals (Sweden)

    Abdirashid Duale

    2011-08-01

    Full Text Available As drought forces hundreds of thousands of Somalis to flee, providing financial services might not seem an immediate priority. However these services are a lifeline for millions of people…

  5. Semantic Web Technologies for Mobile Context-Aware Services

    National Research Council Canada - National Science Library

    Sadeh, Norman M

    2006-01-01

    The emergence of Semantic Web Services and automated service discovery, access and composition functionality will enable higher levels of interoperability and automation across a broad range of contexts (e.g...

  6. 75 FR 11920 - Agilent Technologies, Eesof Division, Including On-Site Leased Workers From Volt and Managed...

    Science.gov (United States)

    2010-03-12

    ... workers of the subject firm. The workers are engaged in the production of electronic design automation software and related services including quality assurance and learning products, marketing, product development, marketing and administration. The company reports that on-site leased workers from Managed...

  7. Technological, political and economic changes and their implications for the evolution of broadcasting services

    DEFF Research Database (Denmark)

    Tadayoni, Reza

    2000-01-01

    The subject of this Ph.D. thesis is changes in the market for broadcasting services as a result of technological, political, and economic drivers. Broadcasting services can be categorised as a part of the ICT-based information and knowledge intensive services that have gone through radical changes...... and demand sites, scarcity of transmission resources, and the historical aspects that make the development of the broadcasting service market different from other information and knowledge intensive services....

  8. Servicom in the user services of federal univerisyt of technology ...

    African Journals Online (AJOL)

    ... using counting, tables and simple percentages. Finally, the conclusion and recommendations on how best to serve her users, for example by commending the automation and provision of Internet services and urging them to go on and automate all her services. Key words: SERVICOM, User, Services, Univeristy, Library ...

  9. Technology support to a telehealth in the home service: Qualitative observations.

    Science.gov (United States)

    Taylor, Alan; Wade, Victoria; Morris, Greg; Pech, Joanne; Rechter, Stuart; Kidd, Michael; Carati, Colin

    2016-07-01

    The Flinders University Telehealth in the Home (FTH) trial was an action research initiative that introduced and evaluated the impact of telehealth services on palliative care patients living in the community, home-based rehabilitation services for the elderly, and services to the elderly in residential aged care. The aim of this study was to understand the issues encountered during the provision of technology services that supported this trial. A mixed methods approach was undertaken to analyse the roles of information and communication technology (ICT) and clinical staff in design, technology management and training. The data sources were staff observations and documents including job logs, meetings, emails and technology descriptions. Use of consumer technology for telehealth required customisation of applications and services. Clinicians played a key role in definition of applications and the embedding of workflow into applications. Usability of applications was key to their subsequent use. Management of design creep and technology services, coupled with support and training for clinicians were important to maintenance of a telehealth service. In the setting described, an iterative approach to the development of telehealth services to the home using consumer technologies was needed. The efficient management of consumer devices in multiple settings will become critical as telehealth services grow in scale. Effective collaboration between clinical and technical stakeholders and further workforce education in telehealth can be key enablers for the transition of face-to-face care to a telehealth mode of delivery. © The Author(s) 2015.

  10. Learning How to Teach Chemistry with Technology: Pre-Service Teachers' Experiences with Integrating Technology into Their Learning and Teaching

    Science.gov (United States)

    Chittleborough, Gail

    2014-06-01

    The Australian Government initiative, Teaching Teachers for the Future (TTF), was a targeted response to improve the preparation of future teachers with integrating technology into their practice. This paper reports on TTF research involving 28 preservice teachers undertaking a chemistry curriculum studies unit that adopted a technological focus. For chemistry teaching the results showed that technological knowledge augmented the fundamental pedagogical knowledge necessary for teaching chemistry content. All the pre-service teachers demonstrated an understanding of the role of technology in teaching and learning and reported an increased skill level in a variety of technologies, many they had not used previously. Some students were sceptical about this learning when schools did not have technological resources available. This paper argues that teacher education courses should include technological skills that match those available in schools, as well as introduce new technologies to support a change in the culture of using technology in schools.

  11. Delivering Technological Literacy to a Class for Elementary School Pre-Service Teachers in South Korea

    Science.gov (United States)

    Kwon, Hyuksoo

    2017-01-01

    This study was conducted with the aim of creating a new introductory course emphasizing the development of technological literacy for elementary school pre-service teachers. This study also aimed to investigate elementary school pre-service teachers' attitudinal transition toward elementary school technology education (ESTE) and its…

  12. The Impact of Project-Based Learning on Pre-Service Teachers' Technology Attitudes and Skills

    Science.gov (United States)

    Alexander, Curby; Knezek, Gerald; Christensen, Rhonda; Tyler-Wood, Tandra; Bull, Glen

    2014-01-01

    Researchers in this study looked at the effect of content-specific, technology-rich project-based learning activities on EC-8 pre-service teachers' competencies and skills, as well as pre-service teacher's attitudes toward science, technology, engineering and mathematics (STEM). Researchers employed a quantitative design involving participants in…

  13. An Examination of Technology Training Experiences from Teacher Candidacy to In-Service Professional Development

    Science.gov (United States)

    Williams, Mable Evans

    2017-01-01

    The purpose of this qualitative study was to explore the perceptions of in-service teachers concerning the effectiveness of technology training from a teacher education preparation program to in-service professional development. The findings of the study revealed that inservice teachers have had varying degrees of technology experiences from their…

  14. Incorporating Service-Learning, Technology, and Research Supportive Teaching Techniques into the University Chemistry Classroom

    Science.gov (United States)

    Saitta, E. K. H.; Bowdon, M. A.; Geiger, C. L.

    2011-01-01

    Technology was integrated into service-learning activities to create an interactive teaching method for undergraduate students at a large research institution. Chemistry students at the University of Central Florida partnered with high school students at Crooms Academy of Information Technology in interactive service learning projects. The…

  15. 31 CFR 545.205 - Prohibited importation of goods, software, technology, or services.

    Science.gov (United States)

    2010-07-01

    ..., software, technology, or services. 545.205 Section 545.205 Money and Finance: Treasury Regulations Relating..., software, technology, or services owned or controlled by the Taliban or persons whose property or interests... (AFGHANISTAN) SANCTIONS REGULATIONS Prohibitions § 545.205 Prohibited importation of goods, software...

  16. 75 FR 30795 - Office of Special Education and Rehabilitative Services; Overview Information; Technology and...

    Science.gov (United States)

    2010-06-02

    ..., social and emotional needs, of children; (b) Implement procedures for monitoring the extent to which the... Information; Technology and Media Services for Individuals With Disabilities--Television Access; Notice.... Funding Opportunity Description Purpose of Program: The purposes of the Technology and Media Services for...

  17. The data and system Nikkei Telecom "Industry/Technology Information Service"

    Science.gov (United States)

    Kurata, Shizuya; Sueyoshi, Yukio

    Nihoh Keizai Shimbun started supplying "Industry/Technology Information Service" from July 1989 as a part of Nikkei Telecom Package, which is online information service using personal computers for its terminals. Previously Nikkei's database service mainly covered such areas as economy, corporations and markets. On the other hand, the new "Industry/Technology Information Service" (main data covers industry by industry information-semi macro) is attracting a good deal of attention as it is the first to supply science and technology related database which has not been touched before. Moreover it is attracting attention technically as it has an access by gateway system to JOIS which is the first class science technology file in Japan. This report introduces data and system of "Industry/Technology Information Service" briefly.

  18. CLOUD SERVICES IN THE EDUCATIONAL PROCESS OF TECHNOLOGICAL COLLEGES’ STUDENTS

    Directory of Open Access Journals (Sweden)

    Svitlana M. Konovalenko

    2017-04-01

    Full Text Available In the article the prospects for "cloud services" use in the educational process in higher educational institutions I-II levels of accreditation are considered. There are analyzed the literature relating to the concept of "cloud services" and their use in the educational process, as well as some advantages and disadvantages of using cloud services at distant data processing. The advantages and disadvantages of cloud service Google Cloud Platform are presented. On the basis of the research it is proposed G Suite for Education service as a Google cloud environment to work with all applications. There are considered new features of Google Docs in cloud services G Suite for Education and showed by the example the solution to problems using new features of Google Docs in Excel application.

  19. E-Division semiannual report, January 1--June 30, 1978

    International Nuclear Information System (INIS)

    Kelley, P.A.

    1978-10-01

    The status of the programs and projects of the Electronics Division is reported for the period of January through June 1978. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support branch is to apply advanced technology to Los Alamos Scientific Laboratory (LASL) and material problems. The primary goal of the Technical Services branch is to provide a technical base and support for LASL programs. Most of the individual reports are quite short; however, significant amounts of information are given in the area of detector research and development. 52 figures, 7 tables

  20. Interrelationships and consequential effects among technological innovation, service consistency, customer satisfaction and loyalty in banking

    OpenAIRE

    Asare Yaw Obeng; Mkhize L Peter

    2017-01-01

    The key to long-term success in banking is consistent improvement and delivering of quality product and or value-added service that conform to the expectations of customers. IT-innovative products/services and processes (technological innovation) facilitate these key elements of customer satisfaction and critical factors for retaining valued customers. The objective of this paper is to explore the effects of technological innovation on service consistency and the consequential effects on cust...

  1. Intelligence, integration & industrialisation for the building services technologies of the future

    DEFF Research Database (Denmark)

    Marsh, Rob

    2007-01-01

    The hypothesis of this paper is that the construction sector's industrial transformation needs to focus on integrating building services technologies in the buildings of the future. This can be achieved by analysing developments in intelligent building services, exploring design strategies...... for effectively integrating building services, and by developing new industrialised solutions for building services technologies. This paper is based on current Danish research and practice, and it is based on linking research knowledge on building services to knowledge on user needs, building design and new...

  2. Physics division annual report 2006.

    Energy Technology Data Exchange (ETDEWEB)

    Glover, J.; Physics

    2008-02-28

    This report highlights the activities of the Physics Division of Argonne National Laboratory in 2006. The Division's programs include the operation as a national user facility of ATLAS, the Argonne Tandem Linear Accelerator System, research in nuclear structure and reactions, nuclear astrophysics, nuclear theory, investigations in medium-energy nuclear physics as well as research and development in accelerator technology. The mission of nuclear physics is to understand the origin, evolution and structure of baryonic matter in the universe--the core of matter, the fuel of stars, and the basic constituent of life itself. The Division's research focuses on innovative new ways to address this mission.

  3. 76 FR 32227 - DST Systems, Inc., Including On-Site Leased Workers From Comsys Information Technology Services...

    Science.gov (United States)

    2011-06-03

    ..., Inc., Including On-Site Leased Workers From Comsys Information Technology Services, Megaforce, and Kelly Services Kansas City, MO; DST Technologies, a Wholly Owned Subsidiary of DST Systems, Inc., Boston... Information Technology Services, Megaforce, and Kelly Services, Kansas City, Missouri (subject firm). The...

  4. Distributed Workflow Service Composition Based on CTR Technology

    Science.gov (United States)

    Feng, Zhilin; Ye, Yanming

    Recently, WS-BPEL has gradually become the basis of a standard for web service description and composition. However, WS-BPEL cannot efficiently describe distributed workflow services for lacking of special expressive power and formal semantics. This paper presents a novel method for modeling distributed workflow service composition with Concurrent TRansaction logic (CTR). The syntactic structure of WS-BPEL and CTR are analyzed, and new rules of mapping WS-BPEL into CTR are given. A case study is put forward to show that the proposed method is appropriate for modeling workflow business services under distributed environments.

  5. Information technology adoption for service innovation practices and competitive advantage: the case of financial firms

    OpenAIRE

    J.S. Chen; H.T. Tsou

    2007-01-01

    Background. The importance of information technology to current business practices has long drawn the attention of practitioners and academicians. Aim. This paper aims to broaden understanding about service innovation as a critical organizational capability through which information technology adoption influences the competitive advantage of a firm. In the context of financial firms, this study examines how information technology is adopted and managed to enhance service innovation practices ...

  6. Marketing implications of self-service technologies amongst online banking customers

    OpenAIRE

    2012-01-01

    M. Comm. The overall goal of this short dissertation is the investigation of self-service technologies with reference to online banking. As the issue of security is one of the main factors to adoption of self-service technologies, it will be the main focus of the study. The focus of the investigation concerns the security perceptions of consumers with regard to selfservice technologies and online banking, and thus determine a framework that groups consumers based on these security percepti...

  7. 7 CFR 94.5 - Charges for laboratory service.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS... costs for analysis of mandatory egg product samples at Science and Technology Division laboratories...

  8. The 1988 Leti Division progress report

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    The 1988 progress report of the CEA's LETI Division (Division of Electronics, Technology and Instrumentation, France) is presented. The missions of LETI Division involve military and nuclear applications of electronics and fundamental research. The research programs developed in 1988 are the following: materials and components, non-volatile silicon memories, silicon-over-insulator, integrated circuits technologies, common experimental laboratory (opened to the European community), mass memories, photodetectors, micron sensors and flat screens [fr

  9. E-Division semiannual report. Progress report, June 1--December 31, 1977. [Electronics and Instrumentation Division, LASL

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, P.A. (comp.)

    1978-03-01

    The status of the programs and projects of the Electronics Division is reported for the period of June through December 1977. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support branch is to apply advanced technology to laboratory and material problems. The primary goal of the Technical Services branch is to provide a technical base and support for Laboratory programs. These goals are reflected in this report. Among the subject areas included are the following: radiation detectors, temperature monitoring, electromagnetic probing, Josephson junction switching devices, fiber optics, high-temperature electronics, HVAC systems, microprocessors, fuel cell-powered vehicles, laser fusion.

  10. Technology in Mental Health: Creating New Knowledge and Inventing the Future of Services.

    Science.gov (United States)

    Ben-Zeev, Dror

    2017-02-01

    The mental health services now in place are intrinsically linked with the technology that has been at our disposal for decades of research and practice. Advancements in Web, mobile, sensor, and informatics technology can do more than serve as tools to enhance existing models of care. Novel technologies can help us better understand the very nature of mental illness and revise our fundamental assumptions about the structure, boundaries, and modalities of mental health treatment. Recognizing the unprecedented opportunities new technology offers to improve the outcomes of people with mental illness, Psychiatric Services announces a new column on technology and mental health.

  11. Civil Service Human Resource Capacity and Information Technology

    African Journals Online (AJOL)

    Tesfaye

    2009-01-01

    Jan 1, 2009 ... civil service organizations to make them accountable and responsible for ... changing the structure of the civil service organisations. More generally .... method to measure productivity of IT based on before and after IT investment .... 2000, and the wealth value of office equipment4, of Federal. Offices as a ...

  12. India: a Case of Fragile Wireless Service and Technology Adoption?

    NARCIS (Netherlands)

    L-F. Pau (Louis-François); J. Motiwalla

    2007-01-01

    textabstractWireless penetration and the Indian economy have grown significantly over the past few years, but how robust and sustainable is the adoption of wireless services and products? Several papers have discussed India as a wireless service and product market, and sometimes tried to assess

  13. Preservice and In-Service Teachers' Perceptions toward Technology Benefits and Integration

    Science.gov (United States)

    Spaulding, Michael

    2013-01-01

    This study examined preservice teacher attitudes toward and expected technology integration practices as compared to in-service teachers' attitudes toward and actual (self-reported) practice of technology integration. The preservice teachers revealed a greater level of confidence in their ability to integrate technology and more positive beliefs…

  14. TPACK Competencies and Technology Integration Self-Efficacy Perceptions of Pre-Service Teachers

    Science.gov (United States)

    Keser, Hafize; Karaoglan Yilmaz, Fatma Gizem; Yilmaz, Ramazan

    2015-01-01

    This study compared the technological pedagogical content knowledge (TPACK) competency of pre-service teachers with their self-efficacy perception towards technology integration, based on various variables; and the correlation between their TPACK competencies and self-efficacy perceptions towards technology integration were examined. The study…

  15. Development of Pre-Service Chemistry Teachers' Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Cetin-Dindar, Ayla; Boz, Yezdan; Sonmez, Demet Yildiran; Celep, Nilgun Demirci

    2018-01-01

    In this study, a mixed-method design was employed to investigate pre-service chemistry teachers' Technological Pedagogical Content Knowledge (TPACK) development. For effective technology integration in instruction, knowledge about technology is not enough; teachers should have different knowledge types which are content, pedagogical, and…

  16. 2003 Chemical Engineering Division annual technical report

    International Nuclear Information System (INIS)

    Lewis, D.; Graziano, D.; Miller, J. F.; Vandegrift, G.

    2004-01-01

    The Chemical Engineering Division is one of six divisions within the Engineering Research Directorate at Argonne National Laboratory, one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, to promote national security, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base by developing innovative technology and transferring it to industry. The Division is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced electrochemical power sources, and management of both high- and low-level nuclear wastes. Additionally, the Division operates the Analytical Chemistry Laboratory, which provides a broad range of analytical services to Argonne and other organizations. The Division is multidisciplinary. Its people have formal training in chemistry; physics; materials science; and electrical, mechanical, chemical, and nuclear engineering. They are specialists in electrochemistry, ceramics, metallurgy, catalysis, materials characterization, nuclear magnetic resonance, repository science, and the nuclear fuel cycle. Our staff have experience working in and collaborating with university, industry and government research and development laboratories throughout the world. Our wide-ranging expertise finds ready application in solving energy, national security, and environmental problems. Division personnel are frequently called on by governmental and industrial organizations for advice and contributions to problem solving in areas that intersect present and past Division programs and activities. Currently, we are engaged in the development of several technologies of

  17. Future impact of Blockchain technologies on services, businesses and regulation

    OpenAIRE

    Di Matteo, Tiziana; Aste, Tomaso; Tasca, Paolo

    2017-01-01

    We introduce basic concepts about Blockchain and discuss the future, foreseeable impact of Blockchain technologies onto our industry and society. The paper briefly tracks the origins of this technology from the Bitcoin digital cash system and describes applications ad applicability in other domains highlighting potentials as well as weaknesses, limitations and risks.

  18. The Platform Architecture and Key Technology of Cloud Service that Support Wisdom City Management

    Directory of Open Access Journals (Sweden)

    Liang Xiao

    2013-05-01

    Full Text Available According to the new requirement of constructing “resource sharing and service on demand” wisdom city system, this paper put forward the platform architecture of cloud service for wisdom city management which support IaaS, PaaS and SaaS three types of service model on the basis of researching the operation mode of the wisdom city which under cloud computing environment and through the research of mass storing technology of cloud data, building technology of cloud resource pool, scheduling management methods and monitoring technology of cloud resource, security management and control technology of cloud platform and other key technologies. The platform supports wisdom city system to achieve business or resource scheduling management optimization and the unified and efficient management of large-scale hardware and software, which has the characteristics of cross-domain resource scheduling, cross-domain data sharing, cross-domain facilities integration and cross-domain service integration.

  19. Final priority; Rehabilitation Services Administration--Assistive Technology Alternative Financing Program. Final priority.

    Science.gov (United States)

    2014-08-14

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Assistive Technology Alternative Financing Program administered by the Rehabilitation Services Administration (RSA). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. This priority is designed to ensure that the Department funds high-quality assistive technology (AT) alternative financing programs (AFPs) that meet rigorous standards in order to enable individuals with disabilities to access and acquire assistive technology devices and services necessary to achieve education, community living, and employment goals.

  20. Joint power control based on service factor for code division multiple access system%TDD-CDMA系统中基于业务统计的联合功率控制算法

    Institute of Scientific and Technical Information of China (English)

    陈波; 戎蒙恬; 胡威

    2008-01-01

    An important feature of the traffic in mobile networks is burstiness. Drawbacks of conventional power control algorithms for time division duplex (TDD)-code division multiple access (CDMA) systems are analyzed. A joint power control algorithm based on service factor is presented to address the TDD-CDMA mobile services in the burst mode according to the Markov modulated Bernoulli process. The joint power control equation is derived. A function model is developed to verify the new algorithm and evaluate its performance. Simulation results show that the new power control algorithm can estimate interference strength more precisely, speed up convergence of power control, and enhance power efficiency and system capacity. It is shown that the proposed algorithm is more robust against rink gain changes, and outperforms the reference algorithms.

  1. Automated Service Discovery using Autonomous Control Technologies, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — With the advent of mobile commerce technologies, the realization of pervasive computing and the formation of ad-hoc networks can be leveraged to the benefit of the...

  2. Directory of Technology Support Services to Brownfields Localities

    Science.gov (United States)

    This directory provides information about EPA offices, nongovernment organizations funded by EPA, and other federal agencies, that may be able to provide expertise to assist in the selection of technologies to characterize and clean up brownfields.

  3. Notification: EPA Investments in Information Technology Products and Services

    Science.gov (United States)

    Project #OA-FY14-0307, June 10, 2014. The U.S. Environmental Protection Agency (EPA) Office oflnspector General (OIG) plans to begin preliminary research on the EPA's management of information technology (IT) investments.

  4. Establishing a support service for educational technology within a university

    Directory of Open Access Journals (Sweden)

    J. A. Longstaffe

    1996-12-01

    Full Text Available Over the past decade it has become increasingly apparent that computer technology is extremely effective in the support of teaching and learning. It has also become obvious that without proselytization and support, the adoption of this new method of teaching is patchy and frequently inappropriate. The raising of awareness, the training of staff and the provision of informed advice and support are necessary to facilitate the appropriate development of technology-supported learning within an institution.

  5. Definition of technology development missions for early Space Station satellite servicing. Volume 2: Technical

    Science.gov (United States)

    Cable, D. A.; Diewald, C. A.; Hills, T. C.; Parmentier, T. J.; Spencer, R. A.; Stone, G. E.

    1984-01-01

    Volume 2 contains the Technical Report of the approach and results of the Phase 2 study. The phase 2 servicing study was initiated in June 1983, and is being reported in this document. The scope of the contract was to: (1) define in detail five selected technology development missions (TDM); (2) conduct a design requirement analysis to refine definitions of satellite servicing requirements at the space station; and (3) develop a technology plan that would identify and schedule prerequisite precursor technology development, associated. STS flight experiments and space station experiments needed to provide onorbit validation of the evolving technology.

  6. On-call service of neurosurgeons in Germany: organization, use of communication services, and personal acceptance of modern technologies.

    Science.gov (United States)

    Brenke, Christopher; Lassel, Elke A; Terris, Darcey; Kurt, Aysel; Schmieder, Kirsten; Schoenberg, Stefan O; Weisser, Gerald

    2014-05-01

    A significant proportion of acute care neurosurgical patients present to hospital outside regular working hours. The objective of our study was to evaluate the structure of neurosurgical on-call services in Germany, the use of modern communication devices and teleradiology services, and the personal acceptance of modern technologies by neurosurgeons. A nationwide survey of all 141 neurosurgical departments in Germany was performed. The questionnaire consisted of two parts: one for neurosurgical departments and one for individual neurosurgeons. The questionnaire, available online and mailed in paper form, included 21 questions about on-call service structure; the availability and use of communication devices, teleradiology services, and other information services; and neurosurgeons' personal acceptance of modern technologies. The questionnaire return rate from departments was 63.1% (89/141), whereas 187 individual neurosurgeons responded. For 57.3% of departments, teleradiology services were available and were frequently used by 62.2% of neurosurgeons. A further 23.6% of departments described using smartphone screenshots of computed tomography (CT) images transmitted by multimedia messaging service (MMS), and 8.6% of images were described as sent by unencrypted email. Although 47.0% of neurosurgeons reported owning a smartphone, only 1.1% used their phone for on-call image communication. Teleradiology services were observed to be widely used by on-call neurosurgeons in Germany. Nevertheless, a significant number of departments appear to use outdated techniques or techniques that leave patient data unprotected. On-call neurosurgeons in Germany report a willingness to adopt more modern approaches, utilizing readily available smartphones or tablet technology. Georg Thieme Verlag KG Stuttgart · New York.

  7. An action research according to the division of labor alternately within the scope of “Science Technology and Laboratory practice II” lecture

    Directory of Open Access Journals (Sweden)

    Sibel Sadi Yılmaz

    2017-06-01

    Full Text Available The purpose of this study is to examine their views and suggestions about conducted lecture as work division alternately to be more productive the “Science Technology and Laboratory Practice II” lecture of primary school teacher candidates. This study was used the action research. Students has been divided into groups consisting of three or four students. The distribution of task related to the topic to group members has been done. These tasks was done by each of the group members. Participants of the study have been selected according to convenience sampling (available sampling. The participants of the study comprise the researcher’s own course students. The study was conducted with 65 students studying primary school teacher candidates 2nd class. It was taken as written form students' opinions and suggestions about the application form prepared researcher by at the end of the application. Most of the students expressed the course has contributed to the development of self-confidence in basic science lecture topics. Besides most of the students expressed is extant that they learned knowledge.

  8. Report on the joint meeting of the Division of Development and Technology Plasma Wall Interaction and High Heat Flux Materials and Components task groups

    International Nuclear Information System (INIS)

    Nygren, R.E.

    1992-04-01

    The Plasma/Wall Interaction and High Heat Flux Materials and Components Task Groups typically hold a joint meeting each year to provide a forum for discussion of technical issues of current interest as well as an opportunity for program reviews by the Department of Energy (DOE). At the meeting in September 1990, reported here, research programs in support of the International Thermonuclear Experimental Reactor (ITER) were highlighted. The first part of the meeting was devoted to research and development (R ampersand D) for ITER on plasma facing components plus introductory presentations on some current projects and design studies. The balance of the meeting was devoted to program reviews, which included presentations by most of the participants in the Small Business Innovative Research (SBIR) Programs with activities related to plasma wall interactions. The Task Groups on Plasma/Wall Interaction and on High Heat Flux Materials and Components were chartered as continuing working groups by the Division of Development and Technology in DOE's Magnetic Fusion Program. This report is an addition to the series of ''blue cover'' reports on the Joint Meetings of the Plasma/Wall Interaction and High Heat Flux Materials and Components Task Groups. Among several preceding meetings were those in October 1989 and January 1988

  9. New delivery technology for financial services and the changing role of financial intermediaries

    OpenAIRE

    Buhl, Hans Ulrich

    1998-01-01

    New delivery technology for financial services and the changing role of financial intermediaries / H. U. Buhl ; A. Will. - In: Business Information Systems ´98 / W. Abramowicz (ed.). - Poznan : Akad. Ekonomiczna w Poznaniu, 1998. - S. 203-215

  10. T-Check in Technologies for Interoperability: Business Process Management in a Web Services Context

    National Research Council Canada - National Science Library

    Hueppi, Fabian; Wrage, Lutz; Lewis, Grace A

    2008-01-01

    .... Composition languages are one type of BPM technology. Through the use of composition languages, business processes that are implemented through software and available as web services can be combined into new processes...

  11. DHIAP Phase I Technology Demonstration Report: Prototype for Remote Authentication Dail-In User Service (RADIUS)

    National Research Council Canada - National Science Library

    Crane, Lynn

    2000-01-01

    ... a region, is a system that meets the Remote Authentication Dial-In User Service (RADIUS) standard. This report describes the development and trials of the technology and provides an analysis of alternative.

  12. SITE Technology Capsule. Demonstration of Rocky Mountain Remediation Services Soil Amendment

    Science.gov (United States)

    This report briefly summarizes the Rocky Mountain Remediation Services treatment technology demonstration of a soil amendment process for lead contaminated soil at Roseville, OH. The evaluation included leaching, bioavailability, geotechnical, and geochemical methods.

  13. Strategic analysis of companies offering technology services to farmers for mobile applications media

    Directory of Open Access Journals (Sweden)

    Rodrigo da Silva Riquena

    2016-03-01

    Full Text Available The use of smart-phones and tablets is increasing the farming community before these fact companies that offer products and services to this sector are mobilizing to be active in this new reality. However, companies that operate in the rural market, not only have the aim of helping farmers in providing services through mobile technology applications, it was necessary to identify the strategic performance of these companies as a market opportunity in selling their products in the agricultural sector. Therefore, this article aimed to identify the strategic planning of technology companies to provide services through applications to farmers. The methodological approach used is a qualitative approach with the exploratory and descriptive aim of the use of content analysis of the websites of those companies studied. This study concluded that companies by offering technology services to farmers, use these services strategically to your advantage without the knowledge of the real needs of farmers.

  14. IP-Based TV Technologies, Services and Multidisciplinary Applications

    NARCIS (Netherlands)

    O.M. Bonastre; M.J. Montpetit; P.S. Cesar Garcia (Pablo Santiago)

    2013-01-01

    htmlabstractThe move to Internet Protocol (IP)-based content delivery services has challenged the television industry by allowing high-quality television content to be delivered using the Internet, wired and wireless, private and public. The new convergence paradigm is already playing out its

  15. User-Focused Strategic Services for Technological University Libraries.

    Science.gov (United States)

    Townley, Charles T.

    This paper describes the New Mexico State University (NMSU) Library's strategic plan to develop its services amid an atmosphere of change. A summary of the following components of the strategic plan is given: vision; mission; values; and goals. The revised organizational functions are then illustrated, as well as the role of the selector-liaison…

  16. Business Agility and Information Technology in Service Organizations

    NARCIS (Netherlands)

    M.P.A. van Oosterhout (Marcel)

    2010-01-01

    textabstractService organizations have to deal with highly uncertain events, both in the internal and external environment. In the academic literature and in practice there is not much knowledge about how to deal with this uncertainty. This PhD dissertation investigates the role and impact of

  17. Employing Semantic Technologies for the Orchestration of Government Services

    Science.gov (United States)

    Sabol, Tomáš; Furdík, Karol; Mach, Marián

    The main aim of the eGovernment is to provide efficient, secure, inclusive services for its citizens and businesses. The necessity to integrate services and information resources, to increase accessibility, to reduce the administrative burden on citizens and enterprises - these are only a few reasons why the paradigm of the eGovernment has been shifted from the supply-driven approach toward the connected governance, emphasizing the concept of interoperability (Archmann and Nielsen 2008). On the EU level, the interoperability is explicitly addressed as one of the four main challenges, including in the i2010 strategy (i2010 2005). The Commission's Communication (Interoperability for Pan-European eGovernment Services 2006) strongly emphasizes the necessity of interoperable eGovernment services, based on standards, open specifications, and open interfaces. The Pan-European interoperability initiatives, such as the European Interoperability Framework (2004) and IDABC, as well as many projects supported by the European Commission within the IST Program and the Competitiveness and Innovation Program (CIP), illustrate the importance of interoperability on the EU level.

  18. BNFL Springfields Fuel Division

    International Nuclear Information System (INIS)

    Tarkiainen, S.; Plit, H.

    1998-01-01

    The Fuel Division of British Nuclear Fuels Ltd (BNFL) manufactures nuclear fuel elements for British Magnox and AGR power plants as well as for LWR plants. The new fuel factory - Oxide Fuel Complex (OFC), located in Springfields, is equipped with modern technology and the automation level of the factory is very high. With their quality products, BNFL aims for the new business areas. A recent example of this expansion was shown, when BNFL signed a contract to design and license new VVER-440 fuel for Finnish Loviisa and Hungarian Paks power plants. (author)

  19. Pre-service Teachers’ Perceptions of Technology and Multiliteracy Within the Inclusive Classroom

    Directory of Open Access Journals (Sweden)

    Julie K. Corkett

    2015-05-01

    Full Text Available The increased use of technology in today’s schools has created new possibilities for pre-service teachers and their students. Rather than limiting the use of technology based on student ability, it is now possible for pre-service teachers to develop integrated multiliteracy lessons that integrate technology and enhance student learning. Technology in the form of apps for iPads, iPods, and desktop computers enable teachers to achieve this goal; however, pre-service teacher’s perceptions of technology and teacher self-efficacy in relation to technology may influence whether technology is integrated into their lessons. This paper examines 144 primary/junior pre-service teacher’s self-efficacy and perceptions of technology before and after developing an app based m ultiliteracy lesson plan. Findings suggest that new teachers were more comfortable with the idea of integrating technology into their lessons after researching and completing a lesson plan focusing on the use of apps within an inclusive classroom.

  20. 31 CFR 560.205 - Prohibited reexportation of goods, technology or services to Iran or the Government of Iran by...

    Science.gov (United States)

    2010-07-01

    ..., technology or services to Iran or the Government of Iran by persons other than United States persons... Prohibitions § 560.205 Prohibited reexportation of goods, technology or services to Iran or the Government of... than a United States person, of any goods, technology or services that have been exported from the...

  1. 31 CFR 560.204 - Prohibited exportation, reexportation, sale or supply of goods, technology, or services to Iran.

    Science.gov (United States)

    2010-07-01

    ..., sale or supply of goods, technology, or services to Iran. 560.204 Section 560.204 Money and Finance..., reexportation, sale or supply of goods, technology, or services to Iran. Except as otherwise authorized pursuant..., sale, or supply of any goods, technology, or services to a person in a third country undertaken with...

  2. 31 CFR 539.306 - Goods, technology, or services produced or provided by a designated foreign person.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Goods, technology, or services..., technology, or services produced or provided by a designated foreign person. With respect to the prohibitions in §§ 539.201 and 539.202, the term goods, technology, or services produced or provided by a...

  3. 78 FR 41954 - TA-W-82,634, Prudential Global Business Technology Solutions Central Security Services Dresher...

    Science.gov (United States)

    2013-07-12

    ... Business Technology Solutions Central Security Services Iselin, New Jersey; TA-W-82,634B, Prudential Global Business Technology Solutions Central Security Services Plymouth, Minnesota; TA- W-82,634C, Prudential Global Business Technology Solutions Central Security Services Scottsdale, Arizona; TA-W-82,634D...

  4. External Service Providers to the National Security Technology Incubator: Formalization of Relationships

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-04-30

    This report documents the formalization of relationships with external service providers in the development of the National Security Technology Incubator (NSTI). The technology incubator is being developed as part of the National Security Preparedness Project (NSPP), funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This report summarizes the process in developing and formalizing relationships with those service providers and includes a sample letter of cooperation executed with each provider.

  5. Reflection on the talent structure of knowledge-service oriented nuclear technology library

    International Nuclear Information System (INIS)

    Zhang Xue; Zhang Ruiping

    2010-01-01

    Nuclear technology library is the only authoritative organization in collection of nuclear technology literatures.It has exceptional advantage and a large number of customers with great requirement. With promotion of network and digitization of information resource, new situation is posed before nuclear technology library-transforming from traditional library to knowledge-service oriented library. In order to carry on knowledge service effectively and conveniently, a variety of talents are essential. So establishing a talent team with high quality and complete specialities is the fundamental guarantee. Based on a great deal research and discussion, requirements for establishment of a talent team are put forward in the paper and suggestion are present: 5 basic specialized talents are required in nuclear technology library, including organization and management talent, basic operation talent, search service talent, technology application talent, information development talent. (authors)

  6. Pre-Service Teacher Self-Efficacy in Digital Technology

    Science.gov (United States)

    Lemon, Narelle; Garvis, Susanne

    2016-01-01

    Self-efficacy is an important motivational construct for primary school teachers (teachers of children aged 5-12 years) within Australia. Teacher self-efficacy beliefs will determine the level of teacher confidence and competence to engage with a task. In this study, we explore engagement with digital technology and the associated learning and…

  7. Satellite Technologies and Services: Implications for International Distance Education.

    Science.gov (United States)

    Stahmer, Anna

    1987-01-01

    This examination of international distance education and open university applications of communication satellites at the postsecondary level notes activities in less developed countries (LDCs); presents potential models for cooperation; and describes technical systems for distance education, emphasizing satellite technology and possible problems…

  8. An Analysis of Personal Technology Use by Service Members and Military Behavioral Health Providers.

    Science.gov (United States)

    Edwards-Stewart, Amanda; Smolenski, Derek J; Reger, Greg M; Bush, Nigel; Workman, Don E

    2016-07-01

    Personal technology use is ubiquitous in the United States today and technology, in general, continues to change the face of health care. However, little is known about the personal technology use of military service members and the behavioral health care providers that treat them. This study reports the technology use of 1,101 active duty service members and 45 behavioral health care providers at a large military installation. Participants reported Internet usage; ownership of smartphones, tablets, and e-readers; usage of mobile applications (apps); and basic demographic information. Compared with providers, service members reported higher rates of smartphone ownership, were more likely to own Android smartphones than iPhones, and spent more time gaming. Both groups spent a comparable amount of time using social media. With the exception of gaming, however, differences between service members and providers were not statistically significant when demographics were matched and controlled. Among service members, younger respondents (18-34) were statistically more likely than older respondents (35-58) to own smartphones, spend time gaming, and engage in social media. Our findings can help inform provider's technology-based education and intervention of their patients and guide the development of new technologies to support the psychological health of service members. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

  9. Millennials, Technology and Perceived Relevance of Community Service Organizations: Is Social Media Replacing Community Service Activities?

    Science.gov (United States)

    Hoffman, August John

    2017-01-01

    This mixed-methods qualitative study examined the relationship between perceptions of the importance of social media (i.e., Facebook, Twitter) with community service projects and volunteerism. Participants (n = 80) were interviewed and surveyed regarding their experiences in participating in a variety of community service work (CSW) projects…

  10. Information service platform for science and technology innovation and entrepreneurship: New information service practice in the NSLC

    Institute of Scientific and Technical Information of China (English)

    Ping; JIA; Yajing; LIU; Xiwen; LIU; Yu; DENG; Yue; YOU; Su; WANG; Xiaohua; PENG

    2015-01-01

    Purpose: This study explores new content, forms, and fields of science and technology(S&T;) innovation and entrepreneurship information services of the National Science Library of the Chinese Academy of Sciences(NSLC).Design/methodology/approach: We cooperated with incubator enterprises and set up an "S&T; Innovation and Entrepreneurship Information Service Platform." We designed five series of activities, including industrial information release, project financing and roadshows, entrepreneurial sharing, entrepreneurial coaching sessions, and entrepreneurial salons. Based on the implementation of these activities, we designed new NSLC library services for S&T; innovation and entrepreneurship.Findings: Since the construction of the platform, these five series of activities have attracted more than 80 business projects, 90 investors, and 30 researchers. Furthermore, more than 20 media representatives and nearly 300 entrepreneurs have participated in the activities that the NSLC has organized in the past two years. Through these activities, we have defined an S&T; innovation and entrepreneurship knowledge service model for the NSLC.Research limitations: The service practice of the NSLC is still in the demonstration phase. Due to staffing limitations of our service teams, the expansion of our service activities has been greatly restricted.Practical implications: The innovation and entrepreneurship information services of the NSLC provide a lot of material for transformation of library services for domestic and foreign special libraries.Originality/value: It is useful to transform library and business services by embedding them into ways in which we serve innovation and entrepreneurial activities. This opens up a new field of library knowledge services in China.

  11. Developing Technological Pedagogical Content Knowledge in pre-service science teachers: Support from blended learning

    NARCIS (Netherlands)

    Alayyar, G.; Fisser, Petra; Voogt, Joke

    2012-01-01

    The Technological Pedagogical Content Knowledge (TPACK) framework has been used to prepare pre-service science teachers at the Public Authority of Applied Education and Training in Kuwait for ICT integration in education. Pre-service teachers worked in teams to design an ICT solution for an

  12. Developing Technological Pedagogical Content Knowledge in Pre-Service Science Teachers: Support from Blended Learning

    Science.gov (United States)

    Alayyar, Ghaida M.; Fisser, Petra; Voogt, Joke

    2012-01-01

    The "Technological Pedagogical Content Knowledge" (TPACK) framework has been used to prepare pre-service science teachers at the Public Authority of Applied Education and Training in Kuwait for ICT integration in education. Pre-service teachers worked in teams to design an ICT solution for an authentic problem they faced during in-school…

  13. Information Technologies Pre-Service Teachers' Acceptance of Tablet PCs as an Innovative Learning Tool

    Science.gov (United States)

    Cuhadar, Cem

    2014-01-01

    The current study is aimed to determine if Turkish IT pre-service teachers' acceptance of tablet PCs is within the framework of the Technology Acceptance Model. The research was patterned as a phenomenological study which is among the qualitative research methods. Participants were eight pre-service teachers studying in Trakya University, Faculty…

  14. Pre-Service Teachers' Self-Efficacy Beliefs towards Educational Technologies Integration in Tanzania

    Science.gov (United States)

    Raphael, Christina; Mtebe, Joel S.

    2017-01-01

    This study examines pre-service teachers' (N = 386) self-efficacy beliefs towards educational technologies integration in the classroom at the two colleges in Tanzania that prepare secondary education teachers. Using regression analysis, the study found out that the determinants of self-efficacy beliefs among pre-service teachers towards…

  15. Investigation of Pre-Service Teachers' Levels of Readiness to Technology Integration in Education

    Science.gov (United States)

    Cuhadar, Cem

    2018-01-01

    This study aims to expose the training and experience that pre-service teachers acquire in the course of their study at schools of education in regard to the use of information and communication technology (ICT). The study adopts the survey model and its sampling is comprised of 832 pre-service teachers who attend four different faculty of…

  16. 76 FR 40712 - Reopening, Applications for New Awards; Technology and Media Services for Individuals With...

    Science.gov (United States)

    2011-07-11

    ... DEPARTMENT OF EDUCATION [CFDA Number: 84.327U] Reopening, Applications for New Awards; Technology and Media Services for Individuals With Disabilities--Center on Online Learning and Students With Disabilities AGENCY: Office of Special Education and Rehabilitative Services, Department of Education. ACTION...

  17. Turkish Pre-Service Science Teachers' Views on Science-Technology-Society Issues

    Science.gov (United States)

    Yalvac, Bugrahan; Tekkaya, Ceren; Cakiroglu, Jale; Kahyaoglu, Elvan

    2007-01-01

    The international science education community recognises the role of pre-service science teachers' views about the interdependence of Science, Technology, and Society (STS) in achieving scientific literacy for all. To this end, pre-service science teachers' STS views signal the strengths and the weaknesses of science education reform movements.…

  18. How Prepared Are Our Pre-Service Teachers to Integrate Technology? A Pilot Study

    Science.gov (United States)

    Sweeney, Trudy; Drummond, Aaron

    2013-01-01

    This study examines pre-service teachers' technological, pedagogical and content knowledge and the relationships between the factors influencing the development of this knowledge. It concludes with a discussion about the major implications of these findings for the improvement of pre-service teacher education courses. The participants were…

  19. Intelligent Technologies in Library and Information Service Applications. ASIST Monograph Series.

    Science.gov (United States)

    Lancaster, F. W.; Warner, Amy

    The objective of this study was to gain enough familiarity with developments in artificial intelligence (AI) and related technologies to be able to advise the information service community on what can be applied today and what one might reasonably expect to be applicable to library and information services in the near future. The emphasis is on…

  20. Spanish Faculty Preferences and Usage of Library Services in the Field of Science and Technology

    Science.gov (United States)

    Pinto, Maria; Fernandez-Ramos, Andres

    2010-01-01

    The authors compare Spanish faculty use of library services and the interest they express in value-added services and improvement actions. The results are based on data from a survey of 546 faculty in the field of science and technology. The study differentiates between the areas of pure science, engineering and architecture, and life sciences.…

  1. Developing Technological Pedagogical Content Knowledge in pre-service science teachers : Support from blended learning

    NARCIS (Netherlands)

    Alayyar, G.; Fisser, Petra; Voogt, Joke

    2012-01-01

    The Technological Pedagogical Content Knowledge (TPACK) framework has been used to prepare pre-service science teachers at the Public Authority of Applied Education and Training in Kuwait for ICT integration in education. Pre-service teachers worked in teams to design an ICT solution for an

  2. Pre-Service Teachers' Perceptions and Beliefs of Technological Pedagogical Content Knowledge on Algebra

    Science.gov (United States)

    Lin, Cheng-Yao; Kuo, Yu-Chun; Ko, Yi-Yin

    2015-01-01

    The purpose of this study was to investigate elementary pre-service teachers' content knowledge in algebra (Linear Equation, Quadratic Equation, Functions, System Equations and Polynomials) as well as their technological pedagogical content knowledge (TPACK) in teaching algebra. Participants were 79 undergraduate pre-service teachers who were…

  3. How Pre-Service Teachers Learn Educational Technology with the Situated Learning Approach

    Science.gov (United States)

    Kucuk, Sevda

    2018-01-01

    This research investigated pre-service teachers' motivation, learning strategies, and engagement in a situated learning based educational technology course. In this study, correlational research design was used. The sample of this study was 65 second year science education pre-service teachers. The data were collected through two questionnaires.…

  4. Measuring and Supporting Pre-Service Teachers' Self-Efficacy towards Computers, Teaching, and Technology Integration

    Science.gov (United States)

    Killi, Carita; Kauppinen, Merja; Coiro, Julie; Utriainen, Jukka

    2016-01-01

    This paper reports on two studies designed to examine pre-service teachers' self-efficacy beliefs. Study I investigated the measurement properties of a self-efficacy beliefs questionnaire comprising scales for computer self-efficacy, teacher self-efficacy, and self-efficacy towards technology integration. In Study I, 200 pre-service teachers…

  5. Assessment of SDN technology for an easy-to-use VPN service

    NARCIS (Netherlands)

    Pol, R. van der; Gijsen, B.M.M.; Zuraniewski, P.; Romão, D.F.C.; Kaat, M.

    2016-01-01

    This paper describes how state-of-the-art SDN technology can be used to create and validate a user configurable, on-demand VPN service. In the Community Connection (CoCo) project an architecture for the VPN service was designed and a prototype was developed based on the OpenFlow protocol and the

  6. IP-Based TV Technologies, Services and Multidisciplinary Applications

    OpenAIRE

    Bonastre, O.M.; Montpetit, M.J.; Cesar Garcia, Pablo Santiago

    2013-01-01

    htmlabstractThe move to Internet Protocol (IP)-based content delivery services has challenged the television industry by allowing high-quality television content to be delivered using the Internet, wired and wireless, private and public. The new convergence paradigm is already playing out its disruptive role as television is now associated with both a personal and social experience using an ecosystem of devices. The unidirectional flow of content from an operator to a device has thus morphed ...

  7. Perceived Quality of Information Technology Services: The Role of Technostress and Individual Differences

    Directory of Open Access Journals (Sweden)

    Danilo Magno Marchiori

    2015-12-01

    Full Text Available The aim was to identify if the elements of the service encounter and technostress creators affect the perceived service quality provided by internal information technology department, through the realization of a theoretical and empirical research. Quantitative and descriptive in its approach, the study was conducted with 138 users of IT services who work at a federal organization operating in the state of Espírito Santo. This research tested the direct influence of the three elements of service encounter (i.e. service product, service delivery and service environment and four causal factors of technostress (techno-overload, techno-invasion, techno-complexity and techno-uncertainty. In addition, the research tested whether the individual characteristics of users (i.e. gender, age, education, current experience, previous experience and location of work produced statistically significant differences when compared to their perception of the overall quality of services. The results generated through multiple regression showed that the overall quality of services was explained by the service product, service environment, service delivery and techno-complexity variables. Upon comparison, the statistical averages inferred that employees who work in decentralized organizational units, specializing in public service, rated the overall quality of services more positively.

  8. Exploring the Adoption of Technology Driven Services in the Healthcare Industry

    OpenAIRE

    Umit Topacan; A. Nuri Basoglu; Tugrul U. Daim

    2010-01-01

    Recent developments in information and communication technologies have helped to accelerate the diffusion of electronic services in the medical industry. Health information services house, retrieve, and make use of medical information to improve service quality and reduce cost. Users—including medical staff, administrative staff, and patients—of these systems cannot fully benefit from them unless they can use them comfortably. User behavior is affected by various factors relating to techn...

  9. Effects of a Technology-Friendly Education Program on Pre-Service Teachers' Perceptions and Learning Styles

    Science.gov (United States)

    Kim, Dong-Joong; Choi, Sang-Ho

    2016-01-01

    A technology-friendly teacher education program can make pre-service teachers more comfortable with using technology from laggard to innovator and change their learning styles in which they prefer the use of technology in teaching. It is investigated how a technology-friendly mathematics education program, which provided 49 pre-service teachers an…

  10. Implementation of Technology in an Elementary Mathematics Lesson: The Experiences of Pre-Service Teachers at One University

    Science.gov (United States)

    Herron, Julie

    2010-01-01

    This study examined pre-service teachers' responses to implementing technology into elementary mathematics lessons. Instructional Architect (IA) was the web-base technology used by the pre-service teachers. Four themes emerged from the data: (a) insights into technology, (b) struggles with technology, (c) access to the mathematics and (d) learning…

  11. Investigation of Technological Pedagogy Content Knowledge of Pre-Service Science and Technology Teachers

    OpenAIRE

    Bayram AKARSU; Esra GÜVEN

    2014-01-01

    The purpose of this study is to investigate Technological Pedagogical Content Knowledge (TPACK) of 3rd and 4th year prospective science teachers, enrollment at the faculty of education, with respect to the technological knowledge (TK), pedagogical knowledge (PK), content knowledge (CK), technological pedagogical knowledge (TPC), pedagogical content knowledge (PCK), and information in the technological content (TPC). These knowledge types are intersection of the sub-dimensions to determine whe...

  12. The Role of Mobile Technologies in Pre-Service Foreign Language Teacher Education

    Science.gov (United States)

    Tolosa, Constanza

    2017-01-01

    Pre-service teacher education plays a pivotal role in ensuring that future teachers are prepared to integrate technology effectively to their teaching. One way of improving readiness in future teachers is integrating mobile technologies to discipline-specific teacher education courses. This article presents three case studies drawn from…

  13. 75 FR 47631 - Swets Information Services, Operations Department, Information Technology Group, Marketing Group...

    Science.gov (United States)

    2010-08-06

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,668] Swets Information Services, Operations Department, Information Technology Group, Marketing Group, Finance Group, Runnemede..., Information Technology (IT) Group, Marketing Group and the Finance Group into one entity instead of...

  14. Towards a Pre-Service Technology Teacher Education Resource for New Zealand

    Science.gov (United States)

    Forret, Michael; Fox-Turnbull, Wendy; Granshaw, Bruce; Harwood, Cliff; Miller, Angela; O'Sullivan, Gary; Patterson, Moira

    2013-01-01

    The Pre-service Technology Teacher Education Resource (PTTER) was developed as a cross-institutional resource to support the development of initial technology teacher education programmes in New Zealand. The PTTER was developed through collaboration involving representatives from each of the six New Zealand university teacher education providers,…

  15. Secondary Mathematics Pre-Service Teachers' Processes of Selection and Integration of Technology

    Science.gov (United States)

    Uzan, Erol

    2017-01-01

    This study investigated secondary mathematics pre-service teachers' (PSTs) knowledge of resources in terms of digital technologies, and explored the processes of both selection and integration of technology into their lesson plans. This study employed a case study design. Participants were six secondary mathematics PSTs who enrolled in a methods…

  16. Modelling the Intention to Use Technology for Teaching Mathematics among Pre-Service Teachers in Serbia

    Science.gov (United States)

    Teo, Timothy; Milutinovic, Verica

    2015-01-01

    This study aims to examine the variables that influence Serbian pre-service teachers' intention to use technology to teach mathematics. Using the technology acceptance model (TAM) as the framework, we developed a research model to include subjective norm, knowledge of mathematics, and facilitating conditions as external variables to the TAM. In…

  17. Jordanian Pre-Service Teachers' and Technology Integration: A Human Resource Development Approach

    Science.gov (United States)

    Al-Ruz, Jamal Abu; Khasawneh, Samer

    2011-01-01

    The purpose of this study was to test a model in which technology integration of pre-service teachers was predicted by a number of university-based and school-based factors. Initially, factors affecting technology integration were identified, and a research-based path model was developed to explain causal relationships between these factors. The…

  18. 77 FR 31600 - Applications for New Awards; Technology and Media Services for Individuals With Disabilities...

    Science.gov (United States)

    2012-05-29

    ... DEPARTMENT OF EDUCATION Applications for New Awards; Technology and Media Services for Individuals With Disabilities--Stepping-Up Technology Implementation Correction In notice document 2012-12278 appearing on pages 29989 through 29995 in the issue of Monday, May 21, 2012 make the following correction...

  19. Mapping Pre-Service Teachers' Evolving Information and Communication Technologies Pedagogy

    Science.gov (United States)

    Savage, Moira

    2016-01-01

    The research examined the nature and scope of e-portfolio reflective writing by primary pre-service teachers about their classroom implementation of information and communication technologies. Familiar and new technologies require a teacher to be able to confidently identify the pedagogical potential for effective learning and teaching. With the…

  20. Pre-Service Teachers' Attitude towards Information and Communication Technology Usage: A Ghanaian Survey

    Science.gov (United States)

    Gyamfi, Stephen Adu

    2017-01-01

    This study employed the Technology Acceptance Model (TAM) to empirically investigate factors that influence Ghanaian pre-service teachers' attitudes towards Information and Communication Technology (ICT) usage. To achieve this aim, the study extended the TAM framework by adding leadership support and job relevance as exogenous variables. Data were…

  1. Investigation of Pre-Service Physical Education Teachers' Attitudes Towards Computer Technologies (Case of Turkey)

    Science.gov (United States)

    Can, Suleyman

    2015-01-01

    Elicitation of pre-service physical education teachers' attitudes towards computer technologies seems to be of great importance to satisfy the conditions to be met for the conscious and effective use of the technologies required by the age to be used in educational settings. In this respect, the purpose of the present study is to investigate…

  2. Information Technology Adoption for Service Innovation Practices and Competitive Advantage: The Case of Financial Firms

    Science.gov (United States)

    Chen, J. S.; Tsou, H. T.

    2007-01-01

    Background: The importance of information technology to current business practices has long drawn the attention of practitioners and academicians. Aim: This paper aims to broaden understanding about service innovation as a critical organizational capability through which information technology adoption influences the competitive advantage of a…

  3. Transforming Pre-Service Teachers' Beliefs and Understandings about Design and Technologies

    Science.gov (United States)

    Best, Marnie

    2017-01-01

    Design and Technologies challenges students to think differently: to think critically and creatively. Yet, how, when and why students are exposed to Design and Technologies curriculum in school classrooms is at the prerogative of their teacher. For this reason, it is imperative that pre-service teachers are inspired by and engaged through…

  4. Providing Assistive Technology Applications as a Service Through Cloud Computing.

    Science.gov (United States)

    Mulfari, Davide; Celesti, Antonio; Villari, Massimo; Puliafito, Antonio

    2015-01-01

    Users with disabilities interact with Personal Computers (PCs) using Assistive Technology (AT) software solutions. Such applications run on a PC that a person with a disability commonly uses. However the configuration of AT applications is not trivial at all, especially whenever the user needs to work on a PC that does not allow him/her to rely on his / her AT tools (e.g., at work, at university, in an Internet point). In this paper, we discuss how cloud computing provides a valid technological solution to enhance such a scenario.With the emergence of cloud computing, many applications are executed on top of virtual machines (VMs). Virtualization allows us to achieve a software implementation of a real computer able to execute a standard operating system and any kind of application. In this paper we propose to build personalized VMs running AT programs and settings. By using the remote desktop technology, our solution enables users to control their customized virtual desktop environment by means of an HTML5-based web interface running on any computer equipped with a browser, whenever they are.

  5. Current programmes of Metallurgy Division (1991)

    International Nuclear Information System (INIS)

    1991-01-01

    Current research and development programmes of the Metallurgy Division are listed under the headings: 1)Thrust Areas, 2)High Temperature Materials Section, 3)Chemical Metallurgy Section, 4)Metallurgical Thermochemistry Section, 5)Physical Metallurgy Section, 6)Mechanical Metallurgy Section, 7)Corrosion Metallurgy Section, 8)Electrochemical Science and Technology Section, 9)Ceramics Section, and 10)Fabrication and Maintenance Group. A list of equipment in the Division and a list of sciientific personnel of the Division are also given. (M.G.B.)

  6. Longitudinal analysis of high-technology medical services and hospital financial performance.

    Science.gov (United States)

    Zengul, Ferhat D; Weech-Maldonado, Robert; Ozaydin, Bunyamin; Patrician, Patricia A; OʼConnor, Stephen J

    U.S. hospitals have been investing in high-technology medical services as a strategy to improve financial performance. Despite the interest in high-tech medical services, there is not much information available about the impact of high-tech services on financial performance. The aim of this study was to examine the impact of high-tech medical services on financial performance of U.S. hospitals by using the resource-based view of the firm as a conceptual framework. Fixed-effects regressions with 2 years lagged independent variables using a longitudinal panel sample of 3,268 hospitals (2005-2010). It was hypothesized that hospitals with rare or large numbers (breadth) of high-tech medical services will experience better financial performance. Fixed effects regression results supported the link between a larger breadth of high-tech services and total margin, but only among not-for-profit hospitals. Both breadth and rareness of high-tech services were associated with high total margin among not-for-profit hospitals. Neither breadth nor rareness of high-tech services was associated with operating margin. Although breadth and rareness of high-tech services resulted in lower expenses per inpatient day among not-for-profit hospitals, these lower costs were offset by lower revenues per inpatient day. Enhancing the breadth of high-tech services may be a legitimate organizational strategy to improve financial performance, especially among not-for-profit hospitals. Hospitals may experience increased productivity and efficiency, and therefore lower inpatient operating costs, as a result of newer technologies. However, the negative impact on operating revenue should caution hospital administrators about revenue reducing features of these technologies, which may be related to the payer mix that these technologies may attract. Therefore, managers should consider both the cost and revenue implications of these technologies.

  7. Access-technology agnostic delivery platform for ICT4D services

    CSIR Research Space (South Africa)

    Makitla, I

    2012-10-01

    Full Text Available .kashan.co.za] CONTEXT Capitalising on target resource-constrained rural communities? technological capabilities can be considered a critical consideration when delivering Information and Communication Technology for Development (ICT4D) content and services... to these communities. The core approach of this research project, which is informed by the concept of ?digital difference?[1], is to leverage the existing technological infrastructure and capacity (know-how) in a community to enable delivery of ICT4D content...

  8. A review of technology and trends in document delivery services

    Energy Technology Data Exchange (ETDEWEB)

    Bourne, C P [DIALOG Information Services, Inc., Palo Alto, CA (United States)

    1990-05-01

    This paper reviews the major lines of technical development being pursued to extend or replace traditional inter-library loan and photocopy service and to facilitate the delivery of source documents to individual end users. Examples of technical approaches discussed are: (1) the inclusion of full text and image data in central online systems; (2) image workstations such as the ADONIS and UMI systems; and (3) the use of electronic networks for document ordering and delivery. Some consideration is given to the policy implications for libraries and information systems. (author). 11 tabs.

  9. A review of technology and trends in document delivery services

    International Nuclear Information System (INIS)

    Bourne, C.P.

    1990-05-01

    This paper reviews the major lines of technical development being pursued to extend or replace traditional inter-library loan and photocopy service and to facilitate the delivery of source documents to individual end users. Examples of technical approaches discussed are: 1) the inclusion of full text and image data in central online systems; 2) image workstations such as the ADONIS and UMI systems; and 3) the use of electronic networks for document ordering and delivery. Some consideration is given to the policy implications for libraries and information systems. (author). 11 tabs

  10. Technology review of commercial food service equipment - final report

    Energy Technology Data Exchange (ETDEWEB)

    Rahbar, S; Krsikapa, S [Canadian Gas Research Inst., Don Mills, ON (Canada); Fisher, D; Nickel, J; Ardley, S; Zabrowski, D [Fisher Consultants (Canada); Barker, R F [ed.

    1996-05-15

    Technical information on commercial gas cooking appliances was presented. This second volume provided an appliance-by-appliance comprehensive assessment of the energy performance of commercial food service equipment. Energy assessments were made for the following categories of cooking equipment: fryers, griddles, broilers, ranges, Chinese ranges, ovens, steamers, steam kettles, and braising pans. Recommendations were made for improving the energy efficiency and overall performance of gas appliances to support of the Canadian gas utilities marketing and energy conservation initiatives. 71 refs., 37 tabs., 58 figs.

  11. On the new situation to descend a basic level technology library information service work

    International Nuclear Information System (INIS)

    Sun Haiyan

    2010-01-01

    With information technology fast developing. library can give readers modernization service. The results of information technology revolution can be used in library. Information materials can be supplied by acoustic image and researching in internet. In this document, we analysis the characteristics, present situations and developments of grass-roots libraries. Discuss the questions in grass-roots science-technology library in nuclear industry, improving the grass-roots equipments, developing various data library, and how to improve the quality of information service in grass-roots library. (author)

  12. [Ecosystem services evaluation based on geographic information system and remote sensing technology: a review].

    Science.gov (United States)

    Li, Wen-Jie; Zhang, Shi-Huang; Wang, Hui-Min

    2011-12-01

    Ecosystem services evaluation is a hot topic in current ecosystem management, and has a close link with human beings welfare. This paper summarized the research progress on the evaluation of ecosystem services based on geographic information system (GIS) and remote sensing (RS) technology, which could be reduced to the following three characters, i. e., ecological economics theory is widely applied as a key method in quantifying ecosystem services, GIS and RS technology play a key role in multi-source data acquisition, spatiotemporal analysis, and integrated platform, and ecosystem mechanism model becomes a powerful tool for understanding the relationships between natural phenomena and human activities. Aiming at the present research status and its inadequacies, this paper put forward an "Assembly Line" framework, which was a distributed one with scalable characteristics, and discussed the future development trend of the integration research on ecosystem services evaluation based on GIS and RS technologies.

  13. [Adoption of new technologies by health services: the challenge of analyzing relevant factors].

    Science.gov (United States)

    Trindade, Evelinda

    2008-05-01

    The exponential increase in the incorporation of health technologies has been considered a key factor in increased expenditures by the health sector. Such decisions involve multiple levels and stakeholders. Decentralization has multiplied the decision-making levels, with numerous difficult choices and limited resources. The interrelationship between stakeholders is complex, in creative systems with multiple determinants and confounders. The current review discusses the interaction between the factors influencing the decisions to incorporate technologies by health services, and proposes a structure for their analysis. The application and intensity of these factors in decision-making and the incorporation of products and programs by health services shapes the installed capacity of local and regional networks and modifies the health system. Empirical observation of decision-making and technology incorporation in Brazilian health services poses an important challenge. The structured recognition and measurement of these variables can assist proactive planning of health services.

  14. Do self-service technologies affect interfirm relationships? A B2B perspective

    Directory of Open Access Journals (Sweden)

    Raechel Johns

    2014-11-01

    Full Text Available While considerable literature examines business-to business (B2B relationships, the impact of technology on these relationships has lacked attention. IT has impacted the way businesses operate in a B2B context as well as influencing services by altering the way services are delivered. To understand the way in which Internet technology has impacted these B2B services, it is essential to examine its impact not only on business processes but on business relationships too. One technology, enabled by modern Internet technologies, which is changing the nature of business relationships is the increased use of self-service technologies (SSTs or technology-enabled services, however, there is a shortage of research in the area in a B2B context. The discussion in this paper provides an overview of the impact of IT on business relationships, using Relationship Marketing theory to provide a theoretical framework. A qualitative study in the Australian banking industry provides findings relating to the theory. The findings of this study provide evidence that while traditional Relationship Marketing theory is still applicable for some business customers, new theory is required for business customers who do not seek relationships. With both practical and theoretical implications, the research detailed in this paper makes a useful contribution to the literature and indicates the necessity for further research to be developed which explores business customers who prefer to remain transaction-oriented, rather than develop interpersonal relationships.

  15. Evaluating the enhancement and improvement of China's technology and financial services platform innovation strategy.

    Science.gov (United States)

    Wu, Ching-Sung; Hu, Kuang-Hua; Chen, Fu-Hsiang

    2016-01-01

    The development of high-tech industry has been prosperous around the world in past decades, while technology and finance have already become the most significant issues in the information era. While high-tech firms are a major force behind a country's economic development, it requires a lot of money for the development process, as well as the financing difficulties for its potential problems, thus, how to evaluate and establish appropriate technology and financial services platforms innovation strategy has become one of the most critical and difficult issues. Moreover, how the chosen intertwined financial environment can be optimized in order that high-tech firms financing problems can be decided has seldom been addressed. Thus, this research aims to establish a technology and financial services platform innovation strategy improvement model, as based on the hybrid MADM model, which addresses the main causal factors and amended priorities in order to strengthen ongoing planning. A DEMATEL technique, as based on Analytic Network Process, as well as modified VIKOR, will be proposed for selecting and re-configuring the aspired technology and financial services platform. An empirical study, as based on China's technology and financial services platform innovation strategy, will be provided for verifying the effectiveness of this proposed methodology. Based on expert interviews, technology and financial services platforms innovation strategy improvement should be made in the following order: credit guarantee platform ( C )_credit rating platform ( B )_investment and finance platform ( A ).

  16. The Research of China's Civil Aviation Passenger Multi-Channel Service Technology Platform

    Science.gov (United States)

    Zhibing, Xue; Xinming, Wang

    IATA is promoting Simplifying the Business. The traditional passenger services and business process, such as ticketing, airport counters, had a great influence. The airlines have the passenger service and convenience as the next product development requirements. With civil aviation industry and their company's products construction, the authors propose a solution of passenger multi-channel service product platform. The solution is to streamline the business as the breakthrough point, around the convenience of passengers travel services to travelers as the center, using the current mainstream and the latest IT technology to establish passenger service product platform. The solution will promote DCS e-ticketing business development and service channel diversity. In this paper, the research results have been applied in the product platform construction of the authors' company. The practice shows that through traditional business with the latest IT technologies, traditional passenger services into the emerging service model, passenger service product platform has strong advantages and characteristics. Based on the platform, various types of service products is growing rapidly.

  17. Definition of technology development missions for early Space Station satellite servicing. Volume 1: Executive summary

    Science.gov (United States)

    1984-01-01

    The Executive Summary volume 1, includes an overview of both phases of the Definition of Technology Development Missions for Early Space Station Satellite Servicing. The primary purpose of Phase 1 of the Marshall Space Flight Center (MSFC) Satellite Servicing Phase 1 study was to establish requirements for demonstrating the capability of performing satellite servicing activities on a permanently manned Space Station in the early 1990s. The scope of Phase 1 included TDM definition, outlining of servicing objectives, derivation of initial Space Station servicing support requirements, and generation of the associated programmatic schedules and cost. The purpose of phase 2 of the satellite servicing study was to expand and refine the overall understanding of how best to use the manned space station as a test bed for demonstration of satellite servicing capabilities.

  18. The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

    OpenAIRE

    Qin, Xiaochun; Shen, Yi; Shao, Shegang

    2015-01-01

    A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and...

  19. Nuclear Physics division progress report

    International Nuclear Information System (INIS)

    Lees, E.W.; Longworth, G.; Scofield, C.J.

    1981-07-01

    Work undertaken by the Nuclear Physics Division of AERE, Harwell during 1980 is presented under the headings: (1) Nuclear Data and Technology for Nuclear Power. (2) Nuclear Studies. (3) Applications of Nuclear and Associated Techniques. (4) Accelerator Operation, Maintenance and Development. Reports, publications and conference papers presented during the period are given and members of staff listed. (U.K.)

  20. Nuclear Physics Division progress report

    International Nuclear Information System (INIS)

    West, D.; Cookson, J.A.; Findlay, D.J.S.

    1984-06-01

    The 1983 progress report of the Nuclear Physics Division, UKAEA Harwell, is divided into four main topics. These are a) nuclear data and technology for nuclear power; b) nuclear studies; c) applications of nuclear and associated techniques, including ion beam techniques and moessbauer spectroscopy; and d) accelerator operation, maintenance and development. (U.K.)

  1. Role of oil service companies in developing human resources worldwide to implement new technology

    Energy Technology Data Exchange (ETDEWEB)

    Baird, D.E.; Bismuth, B.

    1983-01-01

    The role of specialized oil service companies in helping the oil industry develop the hydrocarbon resources of the world efficiently has increased over the last 20 yr. This trend is expected to continue as the complexity and variety of the techniques required increased. In order to provide a large range of services worldwide, the oil service industry has to be highly flexible and mobile. At the same time, successful implementation of these services requires a knowledge of and empathy with local conditions and cultures. The challenge will be to attract, train, and develop technical people from all corners of the globe to become part of the process of developing and implementing new technology. The involvement of the developing nations in the technical evolution of the oil service companies is perhaps the only long-lasting method of transferring these technologies.

  2. Agent paradigm and services technology for distributed Information Sources

    Directory of Open Access Journals (Sweden)

    Hakima Mellah

    2011-10-01

    Full Text Available The complexity of information is issued from interacting information sources (IS, and could be better exploited with respect to relevance of information. In distributed IS system, relevant information has a content that is in connection with other contents in information network, and is used for a certain purpose. The highlighting point of the proposed model is to contribute to information system agility according to a three-dimensional view involving the content, the use and the structure. This reflects the relevance of information complexity and effective methodologies through self organized principle to manage the complexity. This contribution is primarily focused on presenting some factors that lead and trigger for self organization in a Service Oriented Architecture (SOA and how it can be possible to integrate self organization mechanism in the same.

  3. Technology News; Distance Education Project: Extending Extension Programming via Telecommunications Technology; [and] Fax for Library Services.

    Science.gov (United States)

    Coyle, Larry; Spitzer, Kathleen L.

    1992-01-01

    Three articles discuss (1) the numbers of microcomputers installed in elementary and secondary schools; (2) a distance education project in the Minnesota Extension Service that used a satellite delivery system and integrated it with a computer information network; and (3) the use of facsimile machines for library services. (LRW)

  4. (ICT) to Technical Services in Libraries

    African Journals Online (AJOL)

    The term technical services is used in this paper to refer to the major operations that are common to all Technical Services Divisions in libraries – namely, cataloguing, classification, indexing and abstracting. These activities have many repetitive components which used to be done manually. But today the new technology ...

  5. The Use of Technology for STD Partner Services in the United States: A Structured Review.

    Science.gov (United States)

    Kachur, Rachel; Hall, Wendasha; Coor, Alexandra; Kinsey, Jennine; Collins, Dayne; Strona, F V

    2018-05-01

    Since the late 1990s, health departments and STD programs throughout the U.S. have used technologies, such as the internet and mobile phones, to provide services to persons with a sexually transmitted infection, including HIV, and their sex partners, also known as partner services. This study reviewed the published literature to assess and compare partner services outcomes as a result of using technology and to calculate cost savings through cases averted. We conducted a structured literature review of all U.S. studies that examined the use of technology to notify persons exposed to an STD (syphilis, chlamydia, gonorrhea), including HIV, by health care professionals in the U.S. from 2000 to 2017. Outcome measures, including the number of the number of partners notified, screened or tested; and new positives identified, were captured and cost savings were calculated, when data were available. Seven studies were identified. Methods used for partner services differed across studies, although email was the primary mode in 6 (83%) of the 7 studies. Only 2 of the 7 studies compared use of technology for partner services to traditional partner services. Between 10% and 97% of partners were successfully notified of their exposure through the use of technology and between 34% and 81% were screened or tested. Five studies reported on new infections identified, which ranged from 3-19. Use of technology for partner serves saved programs between $22,795 and $45,362 in direct and indirect medical costs. Use of technology for partner services increased the number of partners notified, screened or tested, and new infections found. Importantly, the use of technology allowed programs to reach partners who otherwise would not have been notified of their exposure to an STD or HIV. Improved response times and time to treatment were also seen as was re-engagement into care for previous HIV positive patients. Data and outcome measures across the studies were not standardized, making it

  6. Measuring Technology Acceptance Level of Turkish Pre-Service English Teachers by Using Technology Acceptance Model

    Science.gov (United States)

    Kirmizi, Özkan

    2014-01-01

    The aim of this study is to investigate technology acceptance of prospective English teachers by using Technology Acceptance Model (TAM) in Turkish context. The study is based on Structural Equation Model (SEM). The participants of the study from English Language Teaching Departments of Hacettepe, Gazi and Baskent Universities. The participants…

  7. The Impact Of Self-Service Technology On Customer Satisfaction Of Online Stores

    Directory of Open Access Journals (Sweden)

    Mohammad Sedighimanesh

    2017-07-01

    Full Text Available In todays business environment which unable to meet the needs of the customer without modern technology providing quality and efficient services plays a critical role in attracting and maintain the customers. One of these attractive technologies is self-service services. Therefore in this study Expectation-confirmation model in the context of IT has been employed to investigate the effect of self-service technology on customer satisfaction. This model is widely used in the field of online technology. This is a descriptive study and The data gathering tool is two technological questionnaires self-service and customer satisfaction that were distributed among 369 people of available customers of the online store of Tehran which have an electronic symbolafter confirming the validity and reliability. The analysis of research data was performed using spss21 and Amos 21 software and structural equation modeling indicated that all model assumptions have been confirmed Conceptual model in the considered population is verified and has comprehensiveness.

  8. Civil Remedies Division Administrative Law Judge Decisions

    Data.gov (United States)

    U.S. Department of Health & Human Services — Decisions issued by Administrative Law Judges of the Departmental Appeals Board's Civil Remedies Division concerning fraud and abuse determinations by the Office of...

  9. Application of Workflow Technology for Big Data Analysis Service

    Directory of Open Access Journals (Sweden)

    Bin Zhang

    2018-04-01

    Full Text Available This study presents a lightweight representational state transfer-based cloud workflow system to construct a big data intelligent software-as-a-service (SaaS platform. The system supports the dynamic construction and operation of an intelligent data analysis application, and realizes rapid development and flexible deployment of the business analysis process that can improve the interaction and response time of the process. The proposed system integrates offline-batch and online-streaming analysis models that allow users to conduct batch and streaming computing simultaneously. Users can rend cloud capabilities and customize a set of big data analysis applications in the form of workflow processes. This study elucidates the architecture and application modeling, customization, dynamic construction, and scheduling of a cloud workflow system. A chain workflow foundation mechanism is proposed to combine several analysis components into a chain component that can promote efficiency. Four practical application cases are provided to verify the analysis capability of the system. Experimental results show that the proposed system can support multiple users in accessing the system concurrently and effectively uses data analysis algorithms. The proposed SaaS workflow system has been used in network operators and has achieved good results.

  10. Mobile technology and academic libraries innovative services for research and learning

    CERN Document Server

    Canuel, Robin

    2017-01-01

    In seventeen chapters ranging from A Mobile-First Library Site Redesign to Mobile Technology Support for Field Research to Virtual Reality Library Environments, Mobile Technology and Academic Libraries explores how librarians around the world are working to adapt their spaces, collections, teaching, and services to the new possibilities presented by mobile technology. This is a detailed and thorough examination of technology that's emerging now and how to incorporate it into your library to help the students and researchers of both today and tomorrow.

  11. Personal technology use by U.S. military service members and veterans: an update.

    Science.gov (United States)

    Bush, Nigel E; Wheeler, William M

    2015-04-01

    Although personal electronic devices, such as mobile phones, computers, and tablets, increasingly are being leveraged as vehicles for health in the civilian world, almost nothing is known about personal technology use in the U.S. military. In 2012 we conducted a unique survey of personal technologies used by U.S. military service members. However, with the rapidly growing sophistication of personal technology and changes in consumer habits, that knowledge must be continuously updated to be useful. Accordingly, we recently surveyed new samples of active duty service members, National Guard and Reserve, and veterans. We collected data by online surveys in 2013 from 239 active, inactive, and former service members. Online surveys were completed in-person via laptop computers at a large military installation and remotely via Web-based surveys posted on the Army Knowledge Online Web site and on a Defense Center Facebook social media channel. We measured high rates of personal technology use by service members at home across popular electronic media. The most dramatic change since our earlier survey was the tremendous increase in mobile phone use at home for a wide variety of purposes. Participants also reported moderate non-work uses of computers and tablets while on recent deployment to Iraq and Afghanistan, but almost no mobile phone use, ostensibly because of military restrictions in the war zone. These latest results will enable researchers and technology developers target their efforts on the most promising and popular technologies for psychological health in the military.

  12. Mutations technology in the service of food security

    International Nuclear Information System (INIS)

    Sobeih, S.A.S.

    2013-01-01

    Nuclear techniques of various physical mutagens such as, X-rays, Gamma rays, Beta partials, Neutrons, Lasers, Electron beams, Ion beams irradiation and some chemical mutagens had significantly contributed in developing superior crop varieties of seeds and vegetatively propagated crops. Those released mutant cultivars in different groups had great economic impact on agriculture and food production and added billions of dollars in the economy of many countries. More than 3200 crops varieties of different crops have been officially released by mutation breeding technique. Almost half (48%) of all mutant crop varieties is recorded in cereals. Rice is the crop with the highest number of mutants and accounts for (53%) of the mutant cereals under cultivations followed by barley which makes up (20%) of all cereals mutant varieties globally. More than half (60%) of the mutants crop varieties have been released in Asia. China alone accounts for more than(25%) of all mutant varieties that have been officially released globally. Nuclear technology is an important way to reduce the gap of food between consumption and climate change and on the other hand to increase production. (author)

  13. Reactor Engineering Division annual report

    International Nuclear Information System (INIS)

    Hirota, Jitsuya; Asaoka, Takumi; Suzuki, Tomoo; Mitani, Hiroshi; Akino, Fujiyoshi

    1977-09-01

    Research activities in the Division of Reactor Engineering in fiscal 1976 are described. Works of the division concern mainly the development of multi-purpose Very High Temperature Gas Cooled Reactor, fusion reactor engineering, and the development of Liquid Metal Fast Breeder Reactor in Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, heat transfer and fluid dynamics, reactor and nuclear instrumentation, dynamics analysis and control method development, fusion reactor technology, and activities of the Committee on Reactor Physics. (auth.)

  14. Reactor Engineering Division annual report

    International Nuclear Information System (INIS)

    1980-09-01

    Research activities in the Division of Reactor Engineering in fiscal 1979 are described. The work of the Division is closely related to development of multi-purpose Very High Temperature Gas Cooled Reactor and fusion reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, and fusion reactor technology, and activities of the Committees on Reactor Physics and on Decomissioning of Nuclear Facilities. (author)

  15. Reactor Engineering Division annual report

    International Nuclear Information System (INIS)

    1978-10-01

    Research activities in the Division of Reactor Engineering in fiscal 1977 are described. Works of the Division are development of multi-purpose Very High Temperature Gas Cooled Reactor, fusion reactor engineering, and development of Liquid Metal Fast Breeder Reactor for Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, heat transfer and fluid dynamics, reactor and nuclear instrumentation, dynamics analysis and control method development, fusion reactor technology, and Committee on Reactor Physics. (Author)

  16. Reactor Engineering Division annual report

    International Nuclear Information System (INIS)

    1976-09-01

    Research activities conducted in Reactor Engineering Division in fiscal 1975 are summarized in this report. Works in the division are closely related to the development of multi-purpose High-temperature Gas Cooled Reactor, the development of Liquid Metal Fast Breeder Reactor by Power Reactor and Nuclear Fuel Development Corporation, and engineering research of thermonuclear fusion reactor. Many achievements are described concerning nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, heat transfer and fluid dynamics, reactor and nuclear instrumentation, dynamics analysis and control method development, fusion reactor technology and activities of the Committee on Reactor Physics. (auth.)

  17. Reactor Engineering Division annual report

    International Nuclear Information System (INIS)

    Matsuura, Shojiro; Nakahara, Yasuaki; Takano, Hideki

    1982-09-01

    Research and development activities in the Division of Reactor Engineering in fiscal 1981 are described. The work of the Division is closely related to development of multipurpose Very High Temperature Gas Cooled Reactor and fusion reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, and fusion reactor technology, and activities of the Committee on Reactor Physics. (author)

  18. Reactor Engineering Division annual report

    International Nuclear Information System (INIS)

    1975-11-01

    Research activities in fiscal 1974 in Reactor Engineering Division of eight laboratories and computing center are described. Works in the division are closely related with the development of a multi-purpose High-temperature Gas Cooled Reactor, the development of a Liquid Metal Fast Breeder Reactor in Power Reactor and Nuclear Fuel Development Corporation, and engineering of thermonuclear fusion reactors. They cover nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, heat transfer and fluid dynamics, reactor and nuclear instrumentation, dynamics analysis and control method development, fusion reactor technology and aspects of the computing center. (auth.)

  19. Information Technology Research Services: Powerful Tools to Keep Up with a Rapidly Moving Field

    Science.gov (United States)

    Hunter, Paul

    2010-01-01

    Marty firms offer Information Technology Research reports, analyst calls, conferences, seminars, tools, leadership development, etc. These entities include Gartner, Forrester Research, IDC, The Burton Group, Society for Information Management, 1nfoTech Research, The Corporate Executive Board, and so on. This talk will cover how a number of such services are being used at the Goddard Space Flight Center to improve our IT management practices, workforce skills, approach to innovation, and service delivery. These tools and services are used across the workforce, from the executive leadership to the IT worker. The presentation will cover the types of services each vendor provides and their primary engagement model. The use of these services at other NASA Centers and Headquarters will be included. In addition, I will explain how two of these services are available now to the entire NASA IT workforce through enterprise-wide subscriptions.

  20. 31 CFR 585.205 - Prohibited exportation and reexportation of goods, technology, or services to the FRY (S&M).

    Science.gov (United States)

    2010-07-01

    ... reexportation of goods, technology, or services to the FRY (S&M). 585.205 Section 585.205 Money and Finance... exportation and reexportation of goods, technology, or services to the FRY (S&M). Except as otherwise authorized, no goods, technology (including technical data or other information controlled for export...