WorldWideScience

Sample records for technology selection problem

  1. Analysis of an Interactive Technology Supported Problem-Based Learning STEM Project Using Selected Learning Sciences Interest Areas (SLSIA)

    Science.gov (United States)

    Kumar, David Devraj

    2017-01-01

    This paper reports an analysis of an interactive technology-supported, problem-based learning (PBL) project in science, technology, engineering and mathematics (STEM) from a Learning Sciences perspective using the Selected Learning Sciences Interest Areas (SLSIA). The SLSIA was adapted from the "What kinds of topics do ISLS [International…

  2. GREECE--SELECTED PROBLEMS.

    Science.gov (United States)

    MARTONFFY, ANDREA PONTECORVO; AND OTHERS

    A CURRICULUM GUIDE IS PRESENTED FOR A 10-WEEK STUDY OF ANCIENT GREEK CIVILIZATION AT THE 10TH-GRADE LEVEL. TEACHING MATERIALS FOR THE UNIT INCLUDE (1) PRIMARY AND SECONDARY SOURCES DEALING WITH THE PERIOD FROM THE BRONZE AGE THROUGH THE HELLENISTIC PERIOD, (2) GEOGRAPHY PROBLEMS, AND (3) CULTURAL MODEL PROBLEM EXERCISES. THOSE CONCEPTS WITH WHICH…

  3. New technologies - new corrosion problems

    International Nuclear Information System (INIS)

    Heitz, E.

    1994-01-01

    Adequate resistance of materials to corrosion is equally important for classical and for new technologies. This article considers the economic consequences of corrosion damage and, in addition to the long-known GNP orientation, presents a new approach to the estimation of the costs of corrosion and corrosion protection via maintenance and especially corrosion-related maintenance. The significance of ''high-tech'', ''medium-tech'' and ''low-tech'' material and corrosion problems is assessed. Selected examples taken from new technologies in the areas of power engineering, environmental engineering, chemical engineering, and biotechnology demonstrate the great significance of the problems. It is concluded that corrosion research and corrosion prevention technology will never come to an end but will constantly face new problems. Two technologies are of particular interest since they focus attention on new methods of investigation: microelectronics and final disposal of radioactive wastes. The article closes by considering the importance of the transfer of experience and technology. Since the manufacturs and operators of machines and plant do not generally have access to the very latest knowledge, they should be kept informed through advisory services, experimental studies, databases, and further education. (orig.) [de

  4. Selective Reproductive Technologies

    DEFF Research Database (Denmark)

    Gammeltoft, Tine; Wahlberg, Ayo

    2014-01-01

    From a historical perspective, selective reproduction is nothing new. Infanticide, abandonment, and selective neglect of children have a long history, and the widespread deployment of sterilization and forced abortion in the twentieth century has been well documented. Yet in recent decades select......, discussing how selective reproduction engages with issues of long-standing theoretical concern in anthropology, such as politics, kinship, gender, religion, globalization, and inequality....... (ARTs), what we term selective reproductive technologies (SRTs) are of a more specific nature: Rather than aiming to overcome infertility, they are used to prevent or allow the birth of certain kinds of children. This review highlights anthropological research into SRTs in different parts of the world...

  5. Selecting Security Technology Providers

    Science.gov (United States)

    Schneider, Tod

    2009-01-01

    The world of security technology holds great promise, but it is fraught with opportunities for expensive missteps and misapplications. The quality of the security technology consultants and system integrators one uses will have a direct bearing on how well his school masters this complex subject. Security technology consultants help determine…

  6. Security Problems of Mobile Technologies

    Directory of Open Access Journals (Sweden)

    A. G. Beltov

    2012-09-01

    Full Text Available The article provides an overview of security problems which exist in the mobile devices. The main technologies aimed to protect the phones from various types of attacks are considered. The authors justify the necessity of developing new improved tools and methods to ensure the safety of such devices.

  7. Research mathematicians’ practices in selecting mathematical problems

    DEFF Research Database (Denmark)

    Misfeldt, Morten; Johansen, Mikkel Willum

    2015-01-01

    mathematicians select and pose problems and discuss to what extent our results can be used to inform, criticize, and develop educational practice at various levels. Selecting and posing problems is far from simple. In fact, it is considered hard, complex, and of crucial importance. A number of criteria...

  8. Research Mathematicians' Practices in Selecting Mathematical Problems

    Science.gov (United States)

    Misfeldt, Morten; Johansen, Mikkel Willum

    2015-01-01

    Developing abilities to create, inquire into, qualify, and choose among mathematical problems is an important educational goal. In this paper, we elucidate how mathematicians work with mathematical problems in order to understand this mathematical process. More specifically, we investigate how mathematicians select and pose problems and discuss to…

  9. Automatic Algorithm Selection for Complex Simulation Problems

    CERN Document Server

    Ewald, Roland

    2012-01-01

    To select the most suitable simulation algorithm for a given task is often difficult. This is due to intricate interactions between model features, implementation details, and runtime environment, which may strongly affect the overall performance. An automated selection of simulation algorithms supports users in setting up simulation experiments without demanding expert knowledge on simulation. Roland Ewald analyzes and discusses existing approaches to solve the algorithm selection problem in the context of simulation. He introduces a framework for automatic simulation algorithm selection and

  10. Problems in the communication of technological risks

    International Nuclear Information System (INIS)

    Wiedemann, P.M.; Hennen, L.

    1989-01-01

    The authors discuss the problems in the communication of technological risks. They show that - contrary to a current popular belief - acceptance problems are not attributable to information deficits: such problems are caused rather by the fact that risks are perceived differently by the various groups in science, industry, politics and the larger public. Nevertheless, improved information about technology may help to find acceptable compromises and, thus, to prevent social conflicts to erupt over technology and to geopardize the basic political consensus. (orig.) [de

  11. Some problems on selections for hyperspace topologies

    Directory of Open Access Journals (Sweden)

    Valentin Gutev

    2004-04-01

    Full Text Available The theory of hyperspaces has attracted the attention of many mathematicians who have found a large variety of its applications during the last decades. The theory has taken also its natural course and has yielded lots of problems which, besides their independent inner beauty, provide ties with numerous classical fields of mathematics. In the present note we are concerned with some open problems about selections for hyperspace topologies which have been in the scope of our recent research interests.

  12. The Quadratic Selective Travelling Salesman Problem

    DEFF Research Database (Denmark)

    Thomadsen, Tommy; Stidsen, Thomas K.

    2003-01-01

    A well-known extension of the Travelling Salesman Problem (TSP) is the Selective TSP (STSP): Each node has an associated profit and instead of visiting all nodes, the most profitable set of nodes, taking into account the tour cost, is visited. The Quadratic STSP (QSTSP) adds the additional...

  13. Problems associated with domestic LWR technology development

    International Nuclear Information System (INIS)

    Watamori, Tikara

    1975-01-01

    To cope with the future energy problem in Japan, the enhancement of her own technology is continuing in the nuclear power field. Developments in the past, current state, and problems for the future are described regarding LWR power plants. The technology introduced from overseas countries cannot be used as it is. The domestic technology thus consists of the conversion of nuclear power technology so as to meet Japan's own condition and the domestic manufacture of machinery. In the former category, there are the aspects of aseismatic design, waste disposal, software, etc. In the latter, there are the productions of reactor vessels, steam generators, large valves, piping, etc. As the problems for the future, there are reliability and safety and the associated standardization. (Mori, K.)

  14. Optimization methods for activities selection problems

    Science.gov (United States)

    Mahad, Nor Faradilah; Alias, Suriana; Yaakop, Siti Zulaika; Arshad, Norul Amanina Mohd; Mazni, Elis Sofia

    2017-08-01

    Co-curriculum activities must be joined by every student in Malaysia and these activities bring a lot of benefits to the students. By joining these activities, the students can learn about the time management and they can developing many useful skills. This project focuses on the selection of co-curriculum activities in secondary school using the optimization methods which are the Analytic Hierarchy Process (AHP) and Zero-One Goal Programming (ZOGP). A secondary school in Negeri Sembilan, Malaysia was chosen as a case study. A set of questionnaires were distributed randomly to calculate the weighted for each activity based on the 3 chosen criteria which are soft skills, interesting activities and performances. The weighted was calculated by using AHP and the results showed that the most important criteria is soft skills. Then, the ZOGP model will be analyzed by using LINGO Software version 15.0. There are two priorities to be considered. The first priority which is to minimize the budget for the activities is achieved since the total budget can be reduced by RM233.00. Therefore, the total budget to implement the selected activities is RM11,195.00. The second priority which is to select the co-curriculum activities is also achieved. The results showed that 9 out of 15 activities were selected. Thus, it can concluded that AHP and ZOGP approach can be used as the optimization methods for activities selection problem.

  15. Selection problems and objectives in mutation breeding

    International Nuclear Information System (INIS)

    Mac Key, J.

    1984-01-01

    In plant breeding, major genes are preferably handled by inbreeding, back-crosses and selection through the family/pedigree method. Polygenic systems need gene accumulation, i.e. handling in bulk allowing natural/recurrent selection to operate. The two types of genetic control normally occur together irrespective of whether the variation is created by crossing or by mutagenesis. Cross-breeding can conveniently work with both types of variation and offers a range of genetic backgrounds. Problems are the often enormous recombination potential risking the break-down of already accomplished genic constellations or undesirable linkages. Mutation induction implies a scattered mono- to oligo-factorial variation mostly functioning as a negative load. As a result, it will be difficult and unrealistic to try to explore micromutations, as defined by Gaul, in vegetatively propagated and autogamous crop plants. Quantitative analyses have not been able to give guidance since the induced variation includes disturbed vitality and main or side-effects of events that are possible to define as macro-mutations. The possibility of better exhausting the variation induced will mainly depend on the precision in selection techniques, i.e. by dividing complex traits into their components, by improving environmental conditions for selection, and/or by sharpening the screening technique. Contrary to recombination breeding, mutation-induced variation does not fit a plan encompassing overall agronomic traits simultaneously. The progress has to go step by step. Thus, even more than in cross-breeding, it is important that accurately outlined objectives be set. Some characters, such as flower colour, can easily be defined while others, such as yield, may be more interdependent, calling for compromises difficult to foresee. The complexity of the latter category of traits is illustrated by the interaction pattern in relation to grain yield in cereals where both shoot and root are considered

  16. Technology trends in selected areas

    International Nuclear Information System (INIS)

    Mason, R.

    1990-01-01

    Besides the issues of international consequences of science and technology developments (including information technology, biotechnology, materials technology, nuclear technology, space technology) the following topics were touched only briefly: energy and uses of nuclear power, environmental issues, and matters such as the comprehensive test-ban treaty and the way ahead -more perhaps a phased approach than a single step. The limited time available did not allow considering the role of the United Nations and any other institutional forms in these matters. There is conviction that there was enough historical evidence to suggest that there will be a need for a plurality of institutions, with different geographical, and maybe even political, imperatives. In summary, a conference such as this one at Sendai can offer the United Nations advice on the dynamics of change in sectors of science and technology, of the impact of such changes on matters related to international security - military, economic and the environment. There is belief in the maximum diffusion of science and technology with the minimum discrimination but at the same time dissemination consistent with international security. The value of co-operative efforts in research and development, in the removal of asymmetries in the international system. The removal of such asymmetries would constitute a significant step on the way ahead, to a more just and lasting equilibrium between States

  17. Legal problems brought about by technological progress

    International Nuclear Information System (INIS)

    1986-01-01

    In almost all sectors of public or private life, advances in the natural sciences and the progress of technology provoke changes that have to be managed by society. Our legal system is far from being left untouched by such changes, and frequently has to cope with new and complex legal problems in all fields of law. The book in hand collects eleven lectures presented within the framework of the Studium Generale at Heidelberg University, dealing with significant developments and their effects on the law, as e.g.: Risk acceptance in the wake of new technologies, in vitro fertilisation, early diagnosis of embryonic malformation, protection of animals in the context of medical research, information technologies and data protection, accidents in space and liability problems, transfrontier air pollution, protection of the environment. The legal aspects and the social aspects are discussed in detail by the lectures. Three of the contributions have been separately analysed for the database. (orig./HSCH) [de

  18. Privacy problems in the small sample selection

    Directory of Open Access Journals (Sweden)

    Loredana Cerbara

    2013-05-01

    Full Text Available The side of social research that uses small samples for the production of micro data, today finds some operating difficulties due to the privacy law. The privacy code is a really important and necessary law because it guarantees the Italian citizen’s rights, as already happens in other Countries of the world. However it does not seem appropriate to limit once more the possibilities of the data production of the national centres of research. That possibilities are already moreover compromised due to insufficient founds is a common problem becoming more and more frequent in the research field. It would be necessary, therefore, to include in the law the possibility to use telephonic lists to select samples useful for activities directly of interest and importance to the citizen, such as the collection of the data carried out on the basis of opinion polls by the centres of research of the Italian CNR and some universities.

  19. Characterizing the combinatorial beam angle selection problem

    Science.gov (United States)

    Bangert, Mark; Ziegenhein, Peter; Oelfke, Uwe

    2012-10-01

    The beam angle selection (BAS) problem in intensity-modulated radiation therapy is often interpreted as a combinatorial optimization problem, i.e. finding the best combination of η beams in a discrete set of candidate beams. It is well established that the combinatorial BAS problem may be solved efficiently with metaheuristics such as simulated annealing or genetic algorithms. However, the underlying parameters of the optimization process, such as the inclusion of non-coplanar candidate beams, the angular resolution in the space of candidate beams, and the number of evaluated beam ensembles as well as the relative performance of different metaheuristics have not yet been systematically investigated. We study these open questions in a meta-analysis of four strategies for combinatorial optimization in order to provide a reference for future research related to the BAS problem in intensity-modulated radiation therapy treatment planning. We introduce a high-performance inverse planning engine for BAS. It performs a full fluence optimization for ≈3600 treatment plans per hour while handling up to 50 GB of dose influence data (≈1400 candidate beams). For three head and neck patients, we compare the relative performance of a genetic, a cross-entropy, a simulated annealing and a naive iterative algorithm. The selection of ensembles with 5, 7, 9 and 11 beams considering either only coplanar or all feasible candidate beams is studied for an angular resolution of 5°, 10°, 15° and 20° in the space of candidate beams. The impact of different convergence criteria is investigated in comparison to a fixed termination after the evaluation of 10 000 beam ensembles. In total, our simulations comprise a full fluence optimization for about 3000 000 treatment plans. All four combinatorial BAS strategies yield significant improvements of the objective function value and of the corresponding dose distributions compared to standard beam configurations with equi

  20. Characterizing the combinatorial beam angle selection problem

    International Nuclear Information System (INIS)

    Bangert, Mark; Ziegenhein, Peter; Oelfke, Uwe

    2012-01-01

    The beam angle selection (BAS) problem in intensity-modulated radiation therapy is often interpreted as a combinatorial optimization problem, i.e. finding the best combination of η beams in a discrete set of candidate beams. It is well established that the combinatorial BAS problem may be solved efficiently with metaheuristics such as simulated annealing or genetic algorithms. However, the underlying parameters of the optimization process, such as the inclusion of non-coplanar candidate beams, the angular resolution in the space of candidate beams, and the number of evaluated beam ensembles as well as the relative performance of different metaheuristics have not yet been systematically investigated. We study these open questions in a meta-analysis of four strategies for combinatorial optimization in order to provide a reference for future research related to the BAS problem in intensity-modulated radiation therapy treatment planning. We introduce a high-performance inverse planning engine for BAS. It performs a full fluence optimization for ≈3600 treatment plans per hour while handling up to 50 GB of dose influence data (≈1400 candidate beams). For three head and neck patients, we compare the relative performance of a genetic, a cross-entropy, a simulated annealing and a naive iterative algorithm. The selection of ensembles with 5, 7, 9 and 11 beams considering either only coplanar or all feasible candidate beams is studied for an angular resolution of 5°, 10°, 15° and 20° in the space of candidate beams. The impact of different convergence criteria is investigated in comparison to a fixed termination after the evaluation of 10 000 beam ensembles. In total, our simulations comprise a full fluence optimization for about 3000 000 treatment plans. All four combinatorial BAS strategies yield significant improvements of the objective function value and of the corresponding dose distributions compared to standard beam configurations with equi

  1. Landmine research: technology solutions looking for problems

    Science.gov (United States)

    Trevelyan, James P.

    2004-09-01

    The global landmine problem came to the attention of researchers in the mid 1990's and by 1997 several advanced and expensive sensor research programs had started. Yet, by the end of 2003, there is little sign of a major advance in the technology available to humanitarian demining programs. Given the motivation and dedication of researchers, public goodwill to support such programs, and substantial research resources devoted to the problem, it is worth asking why these programs do not seem to have had an impact on demining costs or casualty rates. Perhaps there are factors that have been overlooked. This paper reviews several research programs to gain a deeper understanding of the problem. A possible explanation is that researchers have accepted mistaken ideas on the nature of the landmine problems that need to be solved. The paper provides several examples where the realities of minefield conditions are quite different to what researchers have been led to believe. Another explanation may lie in the political and economic realities that drive the worldwide effort to eliminate landmines. Most of the resources devoted to landmine clearance programs come from humanitarian aid budgets: landmine affected countries often contribute only a small proportion because they have different priorities based on realistic risk-based assessment of needs and political views of local people. Some aid projects have been driven by the need to find a market for demining technologies rather than by user needs. Finally, there is a common misperception that costs in less developed countries are intrinsically low, reflecting low rates paid for almost all classes of skilled labour. When actual productivity is taken into account, real costs can be higher than industrialized countries. The costs of implementing technological solutions (even using simple technologies) are often significantly under-estimated. Some political decisions may have discouraged thorough investigation of cost

  2. The problem of valuing new energy technologies

    International Nuclear Information System (INIS)

    Awerbuch, Shimon.

    1996-01-01

    A brief editorial outlines the concepts and challenges facing the valuation of modular, renewable energy technologies which are covered in a special issue of ''Energy Policy''. The main problem is the narrowness of the traditional discounted cash flow analysis for valuing such projects when some of the benefits (e.g. flexibility, financial risk, reduction in overhead and indirect costs) are not fully recognized at the outset. (UK)

  3. New Technologies, New Problems, New Laws.

    Science.gov (United States)

    Recupero, Patricia R

    2016-09-01

    Forensic psychiatrists in the 21st century can expect to encounter technology-related social problems for which existing legal remedies are limited. In addition to the inadequate protection of adolescents using social media as outlined by Costello et al., current laws are often poorly suited to remedy problems such as cyberharassment, sexting among minors, and the publication of threatening or harmful communications online. Throughout history, technological developments have often preceded the introduction of new laws or the careful revision of existing laws. This pattern is evident in many of the newer social problems that involve technology, including cyberbullying, online impersonation, and revenge porn. As specialists working at the intersection of human behavior and the law, forensic psychiatrists are uniquely situated to help legal professionals and others understand the impact of internet-related problematic behaviors on victims and, perhaps, to assist in the development of new legal remedies that are better tailored to our increasingly digital society. © 2016 American Academy of Psychiatry and the Law.

  4. The Goodness of Covariance Selection Problem from AUC Bounds

    OpenAIRE

    Khajavi, Navid Tafaghodi; Kuh, Anthony

    2016-01-01

    We conduct a study of graphical models and discuss the quality of model selection approximation by formulating the problem as a detection problem and examining the area under the curve (AUC). We are specifically looking at the model selection problem for jointly Gaussian random vectors. For Gaussian random vectors, this problem simplifies to the covariance selection problem which is widely discussed in literature by Dempster [1]. In this paper, we give the definition for the correlation appro...

  5. Problems of method of technology assessment

    International Nuclear Information System (INIS)

    Zimmermann, V.

    1993-03-01

    The study undertakes to analyse the theoretical and methodological structure of Technology Assessment (TA). It is based on a survey of TA studies which provided an important condition for theoreticall sound statements on methodological aspects of TA. It was established that the main basic theoretical problems of TA are in the field of dealing with complexity. This is also apparent in the constitution of problems, the most elementary and central approach of TA. Scientifically founded constitution of problems and the corresponding construction of models call for interdisciplinary scientific work. Interdisciplinarity in the TA research process is achieved at the level of virtual networks, these networks being composed of individuals suited to teamwork. The emerging network structures have an objective-organizational and an ideational basis. The objective-organizational basis is mainly the result of team composition and the external affiliations of the team members. The ideational basis of the virtual network is represented by the team members' mode of thinking, which is individually located at a multidisciplinary level. The theoretical 'skeleton' of the TA knowledge system, which is represented by process knowledge based linkage structures, can be generated and also processed in connection with the knowledge on types of problems, areas of analysis and procedures to deal with complexity. Within this process, disciplinary knowledge is a necessary but not a sufficient condition. Metatheoretical and metadisciplinary knowledge and the correspondingly processes complexity of models are the basis for the necessary methodological awareness, that allows TA to become designable as a research procedure. (orig./HP) [de

  6. Evaluation Problem versus Selection Problem in Organizational Structures

    NARCIS (Netherlands)

    S.S. Ficco (Stefano); V.A. Karamychev (Vladimir)

    2005-01-01

    textabstractWe consider a hierarchical organization with two fully rational agents. The goal of the organization is that of selecting the best alternative out of several available, and agents are heterogenous in the accuracy with which they screen the alternatives. We show that, if internal

  7. Technological development and natural bases of reproduction. Necessity and problems of a selective innovation policy in the interest of conservation of the natural basis for reproduction, illustrated by the example of energy-saving technologies. Technologische Entwicklung und natuerliche Reproduktionsgrundlagen. Notwendigkeit und Probleme einer selektiven Innovationspolitik im Interesse der Erhaltung der natuerlichen Reproduktionsgrundlagen am Beispiel energiesparender Technologien

    Energy Technology Data Exchange (ETDEWEB)

    Meixner, H

    1980-01-01

    The study is divided into two complementary parts: In Part I, the attempt is made to design a strategy theoretically founded and appropriate for the structure of the problem within the framework of a critical discussion of existing approaches to an economic analysis of the dangers for the natural bases of reproduction. Special importance is attached to the technological development, since a conception of growth adequate in view of environmental restrictions and dwindling resources requires a certain type of innovative change. In Part II of the paper, the discussion is related to the energy sector, which holds a key position as regards the problems of natural bases of reproduction. The basis for Part II of the study is provided by detailed engineering studies on the possibilities of saving energy by using alternative technologies in the Federal Republic of Germany, which have been carried out on behalf of the Federal Minister for Research and Technology.

  8. Supplier selection problem: A fuzzy multicriteria approach

    African Journals Online (AJOL)

    kirstam

    simultaneously: maximising the total value of purchases, minimising ... Keywords: Supplier selection, multi-criteria decision-making, fuzzy logic, satisfaction ... includes both qualitative and quantitative factors, and it is necessary to make a.

  9. Selection of Technology in Global Manufacturing Industries

    DEFF Research Database (Denmark)

    Bruun, Peter

    1997-01-01

    not work well. The host country's business and cultural environment must be taken into account in designing a production system which requires attention to the management elements of technology transfer. This paper presents a model for transfer of manufacturing technology to a foreign site based......Transferring a manufacturing system to another country has proven to be problematic for most multinational firms. Selection of the appropriate production process and technology is a critical decision as transplantation of an existing system from another country without adaptation usually does...... on a sociotechnical system approach. It views the decisions for selecting and implementing a production system as a five stage process. The first step is determining the strategic goals of the foreign plant followed by selection of the production process and manufacturing system types. The last stages involve...

  10. Planar dynamical systems selected classical problems

    CERN Document Server

    Liu, Yirong; Huang, Wentao

    2014-01-01

    This book presents in an elementary way the recent significant developments in the qualitative theory of planar dynamical systems. The subjects are covered as follows: the studies of center and isochronous center problems, multiple Hopf bifurcations and local and global bifurcations of the equivariant planar vector fields which concern with Hilbert's 16th problem. This book is intended for graduate students, post-doctors and researchers in the area of theories and applications of dynamical systems. For all engineers who are interested the theory of dynamical systems, it is also a reasona

  11. Innovative Approach for IBS Vendor Selection Problem

    Directory of Open Access Journals (Sweden)

    Omar Mohd Faizal

    2016-01-01

    Full Text Available Supply chain management in Industrialised Building System (IBS construction management has significantly determined the successful of company and project performance. Due to the wide variety of criteria and vendor available, the vendor selection process for a specific project needs is becoming more difficult. The need of decision aid for vendor selection in other areas is widely discussed in previous research. However, study on vendor selection for IBS project is largely neglected. Decision Support System (DSS is proposed for this purpose. Yet, most of the DSS models are impractical since they are complicated and difficult for a layman such as project managers to use. Research indicates that the rapid development of ICT has highly potential towards simple and effective DSS. Thus, this paper highlights the importance and research approach for vendor selection in IBS project management. The study is based on Design Science Research Methodology with combination of case studies. It is anticipates that this study will yield an effective value-for-money decision making platform to manage vendor selection process.

  12. Polyhedral combinatorics of the cardinality constrained quadratic knapsack problem and the quadratic selective travelling salesman problem

    DEFF Research Database (Denmark)

    Mak, Vicky; Thomadsen, Tommy

    2006-01-01

    This paper considers the cardinality constrained quadratic knapsack problem (QKP) and the quadratic selective travelling salesman problem (QSTSP). The QKP is a generalization of the knapsack problem and the QSTSP is a generalization of the travelling salesman problem. Thus, both problems are NP...

  13. Technology transfer—A growing problem

    Science.gov (United States)

    Bell, Peter M.

    A joint National Academy of Sciences (NAS)-Department of Defense (DOD) panel on the subject of technology transfer, which usually means giving away valuable industrial and perhaps unclassified military designs and information, set national guidelines in its recent report (Eos, October 5, p. 801). The results could affect the freedom of publication and public presentation of geophysical research.An aspect of the problem surfaced in mid-August of this year, when, at the 26th annual technical symposium of the Society of Photooptical Instrumentation Engineers (SPIE) DOD suddenly censored from presentation at the meeting something close to 100 papers, many of which were on applications of infrared technology and its transmission in the atmosphere. A number of the papers had apparent potential to the military, but none of the research was classified. Generally, research contracts with university professors contain nothing about obtaining clearance before presenting the results at professional meetings, but there are rules that apply, to wit the International Traffic in Arms Regulations (ITAR). Also, the Department of Commerce has export control regulations that could be invoked. The censorship at the San Diego meeting has caused considerable clamor within the scientific community, starting with a report about the SPIE events that was published in Science News (Sept. 4, 1982) as ‘Remote Censoring: DOD Blocks Symposium Papers.’

  14. CFC environmental problems and cooling technology

    International Nuclear Information System (INIS)

    Hornung, M.O.

    1991-08-01

    The aim of the report is to provide a broad survey of the technological problems imposed on the production of cooling systems by the demands for reduction in the use of chlorofluorocarbons as refrigerants. With regard to industrial research in this area the present situation is clarified and possible future developments are discussed. The influence of CFC gasses on the global environment and international and national legislation within this field are explained. Alternative refrigerants and cooling processes, and ways of reducing refrigerant leakage, are described. It is concluded that currently the use of alternative refrigerants is the policy which is generally accepted, and intensive research is being carried out in this field. R134a should substitute R12 in the cases of household refrigerators and air conditioning, and will soon be commercially available. The use of R22 and ammonia will be extended. This is a practical policy to follow up commercially, whereas the policy of alternative processes presents more problems because they are not so developed and there is less available know-how in this area. The possibilities for hermetic sealing of cooling systems are unrealistic and should anyway be regarded only as a supplement to alternative refrigerants. Within the European Community it is intended to provide standards and regulations in relation to air pollution from refrigerants. (AB) (58 refs.)

  15. Problems of Technical Electrodynamics (Selected Articles),

    Science.gov (United States)

    1984-04-11

    copy available. ii DC 83143001 PAGE 1 PROBLEMS OF TECHNICAL ELECTRODYNAMICS. DOC - 83143001 PAGE 2 In the collector /collection are connected the...composite/ compound reliable in mechanical sense forgings of rotors with a weight of 250 t and it is more and rotor binding bands. These K forgings must be...go - calculated coefficient, which considers the character of temperature field. With a linear change in temperature .=1, with parabolic =3

  16. Technology meets research 60 years of CERN technology : selected highlights

    CERN Document Server

    Taylor, Thomas; Treille, Daniel; Wenninger, Horst

    2017-01-01

    "Big" science and advanced technology are known to cross-fertilize. This book emphasizes the interplay between particle physics and technology at CERN that has led to breakthroughs in both research and technology over the laboratory's first 60 years. The innovations, often the work of individuals or by small teams, are illustrated with highlights describing selected technologies from the domains of accelerators and detectors. The book also presents the framework and conditions prevailing at CERN that enabled spectacular advances in technology and contributed to propel the European organization into the league of leading research laboratories in the world. While the book is specifically aimed at providing information for the technically interested general public, more expert readers may also appreciate the broad variety of subjects presented. Ample references are given for those who wish to further explore a given topic.

  17. Selected problems in experimental intermediate energy physics

    International Nuclear Information System (INIS)

    Mayes, B.W.; Hungerford, E.V.; Pinsky, L.S.

    1990-09-01

    The objectives of this research program are to: investigate forefront problems in experimental intermediate energy physics; educate students in this field of research; and, develop the instrumentation necessary to undertake this experimental program. Generally, the research is designed to search for physical processes which cannot be explained by conventional models of elementary interactions. This includes the use of nuclear targets where the nucleus provides a many body environment of strongly perturbation of a known interaction by this environment. Unfortunately, such effects may be masked by the complexity of the many body problem and may be difficult to observe. Therefore, experiments must be carefully chosen and analyzed for deviations from the more conventional models. There were three major thrusts of the program; strange particle physics, where a strange quark is embedded in the nuclear medium; muon electro-weak decay, which involves a search for a violation of the standard model of the electro-weak interaction; and measurement of the spin dependent structure function of the neutron

  18. Selected Problems in Nonlinear Dynamics and Sociophysics

    Science.gov (United States)

    Westley, Alexandra Renee

    This Ph.D. dissertation focuses on a collection of problems on the dynamical behavior of nonlinear many-body systems, drawn from two substantially different areas. First, the dynamical behavior seen in strongly nonlinear lattices such as in the Fermi-Pasta-Ulam-Tsingou (FPUT) system (part I) and second, time evolution behavior of interacting living objects which can be broadly considered as sociophysics systems (part II). The studies on FPUT-like systems will comprise of five chapters, dedicated to the properties of solitary and anti-solitary waves in the system, how localized nonlinear excitations decay and spread throughout these lattices, how two colliding solitary waves can precipitate highly localized and stable excitations, a possible alternative way to view these localized excitations through Duffing oscillators, and finally an exploration of parametric resonance in an FPUT-like lattice. Part II consists of two problems in the context of sociophysics. I use molecular dynamics inspired simulations to study the size and the stability of social groups of chimpanzees (such as those seen in central Africa) and compare the results with existing observations on the stability of chimpanzee societies. Secondly, I use an agent-based model to simulate land battles between an intelligent army and an insurgency when both have access to equally powerful weaponry. The study considers genetic algorithm based adaptive strategies to infer the strategies needed for the intelligent army to win the battles.

  19. Goldbach’s problem selected topics

    CERN Document Server

    Rassias, Michael Th

    2017-01-01

    Important results surrounding the proof of Goldbach's ternary conjecture are presented in this book. Beginning with an historical perspective along with an overview of essential lemmas and theorems, this monograph moves on to a detailed proof of Vinogradov's theorem. The principles of the Hardy-Littlewood circle method are outlined and applied to Goldbach's ternary conjecture. New results due to H. Maier and the author on Vinogradov's theorem are proved under the assumption of the Riemann hypothesis. The final chapter discusses an approach to Goldbach's conjecture through theorems by L. G. Schnirelmann. This book concludes with an Appendix featuring a sketch of H. Helfgott's proof of Goldbach's ternary conjecture. The Appendix also presents some biographical remarks of mathematicians whose research has played a seminal role on the Goldbach ternary problem. The author's step-by-step approach makes this book accessible to those that have mastered classical number theory and fundamental notions of mathematical a...

  20. The Problem of Shot Selection in Basketball

    Science.gov (United States)

    Skinner, Brian

    2012-01-01

    In basketball, every time the offense produces a shot opportunity the player with the ball must decide whether the shot is worth taking. In this article, I explore the question of when a team should shoot and when they should pass up the shot by considering a simple theoretical model of the shot selection process, in which the quality of shot opportunities generated by the offense is assumed to fall randomly within a uniform distribution. Within this model I derive an answer to the question “how likely must the shot be to go in before the player should take it?” and I show that this lower cutoff for shot quality depends crucially on the number of shot opportunities remaining (say, before the shot clock expires), with larger demanding that only higher-quality shots should be taken. The function is also derived in the presence of a finite turnover rate and used to predict the shooting rate of an optimal-shooting team as a function of time. The theoretical prediction for the optimal shooting rate is compared to data from the National Basketball Association (NBA). The comparison highlights some limitations of the theoretical model, while also suggesting that NBA teams may be overly reluctant to shoot the ball early in the shot clock. PMID:22295109

  1. The problem of shot selection in basketball.

    Directory of Open Access Journals (Sweden)

    Brian Skinner

    Full Text Available In basketball, every time the offense produces a shot opportunity the player with the ball must decide whether the shot is worth taking. In this article, I explore the question of when a team should shoot and when they should pass up the shot by considering a simple theoretical model of the shot selection process, in which the quality of shot opportunities generated by the offense is assumed to fall randomly within a uniform distribution. Within this model I derive an answer to the question "how likely must the shot be to go in before the player should take it?" and I show that this lower cutoff for shot quality f depends crucially on the number n of shot opportunities remaining (say, before the shot clock expires, with larger n demanding that only higher-quality shots should be taken. The function f(n is also derived in the presence of a finite turnover rate and used to predict the shooting rate of an optimal-shooting team as a function of time. The theoretical prediction for the optimal shooting rate is compared to data from the National Basketball Association (NBA. The comparison highlights some limitations of the theoretical model, while also suggesting that NBA teams may be overly reluctant to shoot the ball early in the shot clock.

  2. The problem of shot selection in basketball.

    Science.gov (United States)

    Skinner, Brian

    2012-01-01

    In basketball, every time the offense produces a shot opportunity the player with the ball must decide whether the shot is worth taking. In this article, I explore the question of when a team should shoot and when they should pass up the shot by considering a simple theoretical model of the shot selection process, in which the quality of shot opportunities generated by the offense is assumed to fall randomly within a uniform distribution. Within this model I derive an answer to the question "how likely must the shot be to go in before the player should take it?" and I show that this lower cutoff for shot quality f depends crucially on the number n of shot opportunities remaining (say, before the shot clock expires), with larger n demanding that only higher-quality shots should be taken. The function f(n) is also derived in the presence of a finite turnover rate and used to predict the shooting rate of an optimal-shooting team as a function of time. The theoretical prediction for the optimal shooting rate is compared to data from the National Basketball Association (NBA). The comparison highlights some limitations of the theoretical model, while also suggesting that NBA teams may be overly reluctant to shoot the ball early in the shot clock.

  3. Selection of technologies for municipal wastewater treatment

    Directory of Open Access Journals (Sweden)

    Juan Pablo Rodríguez Miranda

    2015-11-01

    Full Text Available In water environmental planning in watersheds should contain aspects for the decontamination of receiving water body, therefore the selection of the treatment plants municipal wastewater in developing countries, you should consider aspects of the typical composition raw wastewater pollutant removal efficiency by technology, performance indicators for technology, environmental aspects of localization and spatial localization strategy. This methodology is built on the basis of technical, economic and environmental attributes, such as a tool for decision making future investments in treatment plants municipal wastewater with multidisciplinary elements.

  4. Problem Solving in Technology Education: A Taoist Perspective.

    Science.gov (United States)

    Flowers, Jim

    1998-01-01

    Offers a new approach to teaching problem solving in technology education that encourages students to apply problem-solving skills to improving the human condition. Suggests that technology teachers incorporate elements of a Taoist approach in teaching by viewing technology as a tool with a goal of living a harmonious life. (JOW)

  5. Selecting appropriate technology for hydrogen production

    International Nuclear Information System (INIS)

    Tamhankar, S.S.

    2004-01-01

    'Full text:' Technologies for the production of synthesis gas (H2 + CO), a precursor to hydrogen, from a variety of fossil fuels are well known in industrial applications at relatively large scale. These include Steam Reforming (SR), Auto-Thermal Reforming (ATR) and Partial Oxidation (POX). A particular technology is selected based on the feed type and the desired products. Steam reforming is a mature technology, and is most prevalent for hydrogen production because of its high efficiency. However, at the smaller scale, the capital cost becomes a more significant factor, and a substantial reduction in this cost is necessary to meet the overall H2 gas cost targets, such as that stated by DOE ($1.50/kg). In developing small-scale H2 technologies, often, incremental improvements are incorporated. While useful, these are not adequate for the desired cost reduction. Also, for effective cost reduction, the whole system, including production, purification and associated equipment needs to be evaluated; cost reduction in just one of the units is not sufficient. This paper provides a critical assessment of the existing as well as novel technology options, specifically targeted at small scale H2 production. The technology options are evaluated to clearly point out which may or may not work and why. (author)

  6. Aviation safety and operation problems research and technology

    Science.gov (United States)

    Enders, J. H.; Strickle, J. W.

    1977-01-01

    Aircraft operating problems are described for aviation safety. It is shown that as aircraft technology improves, the knowledge and understanding of operating problems must also improve for economics, reliability and safety.

  7. Two-Stage Fuzzy Portfolio Selection Problem with Transaction Costs

    OpenAIRE

    Chen, Yanju; Wang, Ye

    2015-01-01

    This paper studies a two-period portfolio selection problem. The problem is formulated as a two-stage fuzzy portfolio selection model with transaction costs, in which the future returns of risky security are characterized by possibility distributions. The objective of the proposed model is to achieve the maximum utility in terms of the expected value and variance of the final wealth. Given the first-stage decision vector and a realization of fuzzy return, the optimal value expression of the s...

  8. Materials problems associated with fusion reactor technology

    International Nuclear Information System (INIS)

    Dutton, R.

    This paper outlines the principles of design and operation of conceptual fusion reactors, indicates the level of research funding and activity being proposed at major centres and reviews the major materials problems which have been identified, together with an outline of the experimental techniques which have been suggested for investigating these problems. (author)

  9. Accounting outsourcing and some problems of selected software for accounting

    OpenAIRE

    Turková, Lenka

    2009-01-01

    Diploma thesis on Accounting outsourcing and key problems of selected software for accounting deals with the accounting outsourcing. Work focuses here on the question of the proper selection of an accounting firm and on the conditions of cooperation with it. In this work the reader is also acquainted with some software for accounting and with their advantages and disadvantages.

  10. Mapping Students Use of Technologies in Problem Based Learning Environments

    DEFF Research Database (Denmark)

    Rongbutsri, Nikorn; Khalid, Md. Saifuddin; Ryberg, Thomas

    2011-01-01

    This paper aims to understand how students use technology to enhance their learning in problem-based learning environments. The research methodology is based on both qualitative and quantitative studies. The results are based on students’ interviews, a survey and students’ reflections in course......-related blog posts; they show that students have positive perceptions toward using technologies in problem-based learning environments....

  11. practical common weight maximin approach for technology selection

    African Journals Online (AJOL)

    2014-06-30

    Jun 30, 2014 ... Keywords: Technology selection, Robot selection, Maximin .... manufacturers have consequently oriented the researchers to ..... value judgements in data envelopment analysis: Evolution, development and future directions',.

  12. JUPITER PROJECT - MERGING INVERSE PROBLEM FORMULATION TECHNOLOGIES

    Science.gov (United States)

    The JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) project seeks to enhance and build on the technology and momentum behind two of the most popular sensitivity analysis, data assessment, calibration, and uncertainty analysis programs used in envi...

  13. Electromagnetic waves in complex systems selected theoretical and applied problems

    CERN Document Server

    Velychko, Lyudmyla

    2016-01-01

    This book gives guidance to solve problems in electromagnetics, providing both examples of solving serious research problems as well as the original results to encourage further investigations. The book contains seven chapters on various aspects of resonant wave scattering, each solving one original problem. All of them are unified by the authors’ desire to show advantages of rigorous approaches at all stages, from the formulation of a problem and the selection of a method to the interpretation of results. The book reveals a range of problems associated with wave propagation and scattering in natural and artificial environments or with the design of antennas elements. The authors invoke both theoretical (analytical and numerical) and experimental techniques for handling the problems. Attention is given to mathematical simulations, computational efficiency, and physical interpretation of the experimental results. The book is written for students, graduate students and young researchers. .

  14. An intutionistic fuzzy optimization approach to vendor selection problem

    Directory of Open Access Journals (Sweden)

    Prabjot Kaur

    2016-09-01

    Full Text Available Selecting the right vendor is an important business decision made by any organization. The decision involves multiple criteria and if the objectives vary in preference and scope, then nature of decision becomes multiobjective. In this paper, a vendor selection problem has been formulated as an intutionistic fuzzy multiobjective optimization where appropriate number of vendors is to be selected and order allocated to them. The multiobjective problem includes three objectives: minimizing the net price, maximizing the quality, and maximizing the on time deliveries subject to supplier's constraints. The objection function and the demand are treated as intutionistic fuzzy sets. An intutionistic fuzzy set has its ability to handle uncertainty with additional degrees of freedom. The Intutionistic fuzzy optimization (IFO problem is converted into a crisp linear form and solved using optimization software Tora. The advantage of IFO is that they give better results than fuzzy/crisp optimization. The proposed approach is explained by a numerical example.

  15. Modeling and Solving the Liner Shipping Service Selection Problem

    DEFF Research Database (Denmark)

    Karsten, Christian Vad; Balakrishnan, Anant

    We address a tactical planning problem, the Liner Shipping Service Selection Problem (LSSSP), facing container shipping companies. Given estimated demand between various ports, the LSSSP entails selecting the best subset of non-simple cyclic sailing routes from a given pool of candidate routes...... to accurately model transshipment costs and incorporate routing policies such as maximum transit time, maritime cabotage rules, and operational alliances. Our hop-indexed arc flow model is smaller and easier to solve than path flow models. We outline a preprocessing procedure that exploits both the routing...... requirements and the hop limits to reduce problem size, and describe techniques to accelerate the solution procedure. We present computational results for realistic problem instances from the benchmark suite LINER-LIB....

  16. Facets for the Cardinality Constrained Quadratic Knapsack Problem and the Quadratic Selective Travelling Salesman Problem

    DEFF Research Database (Denmark)

    Mak, Vicky; Thomadsen, Tommy

    2004-01-01

    A well-known extension of the Travelling Salesman Problem (TSP) is the Selective (or Prize-collecting) TSP: In addition to the edge-costs, each node has an associated reward (denoted the node-reward) and instead of visiting all nodes, only profitable nodes are visited. The Quadratic Selective TSP...

  17. Technology and manufacturing process selection the product life cycle perspective

    CERN Document Server

    Pecas, Paulo; Silva, Arlindo

    2014-01-01

    This book provides specific topics intending to contribute to an improved knowledge on Technology Evaluation and Selection in a Life Cycle Perspectives. Although each chapter will present possible approaches and solutions, there are no recipes for success. Each reader will find his/her balance in applying the different topics to his/her own specific situation. Case studies presented throughout will help in deciding what fits best to each situation, but most of all any ultimate success will come out of the interplay between the available solutions and the specific problem or opportunity the reader is faced with.

  18. Teachers' selection and enactment of mathematical problems from textbooks

    Science.gov (United States)

    Son, Ji-Won; Kim, Ok-Kyeong

    2015-12-01

    In order to investigate how teachers' use of textbooks creates different kinds of opportunities for student learning, this study focused on teachers' selection and enactment of problems and tasks from the textbooks and their influence on the cognitive demand placed on students. By drawing on data from three elementary teachers in the USA, two of which used a reform-oriented textbook— Math Trailblazers and one a commercially developed textbook—this study examined kinds of problems the teachers chose and ways in which they enacted those problems in relation to the cognitive demand of the problems. In particular, we attended to the kinds of questions the teachers asked in enacting the problems and ways in which those questions influenced the cognitive demand of the textbook problems. This study also identified critical issues involved in teacher decision-making on task selection and enactment, such as the match between teachers' goals and those of the textbooks, and teachers' perception of textbook problems. Based on the results of the study, we discuss implications for teacher education and professional development.

  19. Sleeping with technology: cognitive, affective, and technology usage predictors of sleep problems among college students.

    Science.gov (United States)

    Rosen, Larry; Carrier, Louis M; Miller, Aimee; Rokkum, Jeffrey; Ruiz, Abraham

    2016-03-01

    Sleep problems related to technology affect college students through several potential mechanisms including displacement of sleep due to technology use, executive functioning abilities, and the impact of emotional states related to stress and anxiety about technology availability. In the present study, cognitive and affective factors that influence technology usage were examined for their impact upon sleep problems. More than 700 US college students completed an online questionnaire addressing technology usage, anxiety/dependence, executive functioning, nighttime phone usage, bedtime phone location, and sleep problems. A path model controlling for background variables was tested using the data. The results showed that executive dysfunction directly predicted sleep problems as well as affected sleep problems through nighttime awakenings. In addition, anxiety/dependence increased daily smartphone usage and also increased nighttime awakenings, which, in turn, affected sleep problems. Thus, both the affective and cognitive factors that influence technology usage affected sleep problems. Copyright © 2016 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

  20. Selection of Nuclear Desalination Technology in East Kalimantan Province

    International Nuclear Information System (INIS)

    Siti Alimah; Sudi Ariyanto; Erlan Dewita; Budiarto; Geni R Sunaryo

    2009-01-01

    Nowadays, electricity demand in East Kalimantan increases with a rate of 12% per annum. Since the electricity supply produced by PT PLN increases 8,5% per annum, then it can consequently an occurrence of electricity shortage in the region. NPP may be regarded as one viable option to overcome the problem. In case of fresh water availability, the supply is also less than the demand. Therefore, a serious effort is necessary. Nuclear desalination, which is a process of separating dissolved salts of seawater or brackish water, can be coupled to the NPP to produce fresh water. There are some desalination technology commonly used in the world i.e. MSF (Multi-Stage Flash Distillation), MED (Multi-Effect Distillation) and RO (Reverse Osmosis). This paper shows the study result of selection for desalination technology to obtain the optimum solution. The selection is done based on the thirteen important parameters, which are estimated to affect on determine technology option on the nuclear desalination with a weighing factor with ranges from 1 to 4. The most favourable technology is that with the highest point. The result show that MED has highest weighing factor that is 39, followed 36 for RO and 33 for MSF. Since the water quality requirement to supply NPP is about 1 ppm and to supply public demand is below 1000 ppm, so a hybrid system of MED-RO is optimum option to produce fresh water. (author)

  1. A survey of drug abuse problems among students of selected ...

    African Journals Online (AJOL)

    The purpose of the study was to survey drug abuse problems among students of selected secondary schools in Ile-Ife in Osun State. Specifically, the study was to find out the reasons for drug abuse among students. The major instrument used to collect needed information was the questionnaire which was distributed to ...

  2. Optimal portfolio selection for general provisioning and terminal wealth problems

    NARCIS (Netherlands)

    van Weert, K.; Dhaene, J.; Goovaerts, M.

    2010-01-01

    In Dhaene et al. (2005), multiperiod portfolio selection problems are discussed, using an analytical approach to find optimal constant mix investment strategies in a provisioning or a savings context. In this paper we extend some of these results, investigating some specific, real-life situations.

  3. Optimal portfolio selection for general provisioning and terminal wealth problems

    NARCIS (Netherlands)

    van Weert, K.; Dhaene, J.; Goovaerts, M.

    2009-01-01

    In Dhaene et al. (2005), multiperiod portfolio selection problems are discussed, using an analytical approach to find optimal constant mix investment strategies in a provisioning or savings context. In this paper we extend some of these results, investigating some specific, real-life situations. The

  4. Supplier selection problem: A fuzzy multicriteria approach | Allouche ...

    African Journals Online (AJOL)

    The purpose of this paper is to suggest a fuzzy multi-criteria approach to solve the supplier selection problem, an approach based on the fuzzy analytic hierarchy process and imprecise goal programming. To deal with decision-maker (DM) preferences, the concept of satisfaction function is introduced. The proposed ...

  5. Competing land use in the reserve site selection problem

    NARCIS (Netherlands)

    Langevelde, van F.; Schotman, A.; Claassen, G.D.H.; Sparenburg, G.A.

    2000-01-01

    The objective of this paper is to present an approach that addresses competing land uses in the reserve site selection problem. This approach is implemented in a spatial optimization model for conservation planning in human-dominated landscapes: MENTOR. This model allocates new sites as stepping

  6. Assessing security technology's impact: old tools for new problems.

    Science.gov (United States)

    Kreissl, Reinhard

    2014-09-01

    The general idea developed in this paper from a sociological perspective is that some of the foundational categories on which the debate about privacy, security and technology rests are blurring. This process is a consequence of a blurring of physical and digital worlds. In order to define limits for legitimate use of intrusive digital technologies, one has to refer to binary distinctions such as private versus public, human versus technical, security versus insecurity to draw differences determining limits for the use of surveillance technologies. These distinctions developed in the physical world and are rooted in a cultural understanding of pre-digital culture. Attempts to capture the problems emerging with the implementation of security technologies using legal reasoning encounter a number of problems since law is by definition oriented backwards, adapting new developments to existing traditions, whereas the intrusion of new technologies in the physical world produces changes and creates fundamentally new problems.

  7. Proposal for Land Consolidation Project Solutions for Selected Problem Areas

    Science.gov (United States)

    Wojcik-Len, Justyna; Strek, Zanna

    2017-12-01

    One of the economic tools for supporting agricultural policy are the activities implemented under the Rural Development Program (RDP). By encouraging agricultural activities and creating equal opportunities for development of farms, among others in areas with unfavourable environmental conditions characterized by low productivity of soils exposed to degradation, decision makers can contribute to improving the spatial structure of rural areas. In Poland, one of the major concerns are agricultural problem areas (regions). In view of this situation, the aim of this article was to characterize the problem areas in question and propose land consolidation project solutions for selected fragments of those areas. This paper presents the results of a review of literature and an analysis of geodetic and cartographic data regarding the problem areas. The process of land consolidation, which is one of the technical and legal instruments supporting the development of rural areas, was characterized. The study allowed the present authors to establish criteria for selecting agricultural problem areas for land consolidation. To develop a proposal for rational management of the problem areas, key general criteria (location, topography, soil quality and usefulness) and specific criteria were defined and assigned weights. A conception of alternative development of the agricultural problem areas was created as part of a land consolidation project. The results were used to create a methodology for the development of agricultural problem areas to be employed during land consolidation in rural areas. Every agricultural space includes areas with unfavourable environmental and soil conditions determined by natural or anthropogenic factors. Development of agricultural problem areas through land consolidation should take into account the specific functions assigned to these areas in land use plans, as well as to comply with legal regulations.

  8. THE EXT RACORPOREAL FERTILIZATION TECHNOLOGIES AND THE SINGULARITY PROBLEMS

    Directory of Open Access Journals (Sweden)

    S. V. Denysenko

    2013-05-01

    Full Text Available The peculiarities of modern medicine development connected with the technological and informative singularity are analyzed. The risks of realization of extracorporeal fertilization are examined from positions of development of informative singularity. The warning problems of origin of singularity are discussed on t h e base of t h e newest technologies development.

  9. A fuzzy logic based PROMETHEE method for material selection problems

    Directory of Open Access Journals (Sweden)

    Muhammet Gul

    2018-03-01

    Full Text Available Material selection is a complex problem in the design and development of products for diverse engineering applications. This paper presents a fuzzy PROMETHEE (Preference Ranking Organization Method for Enrichment Evaluation method based on trapezoidal fuzzy interval numbers that can be applied to the selection of materials for an automotive instrument panel. Also, it presents uniqueness in making a significant contribution to the literature in terms of the application of fuzzy decision-making approach to material selection problems. The method is illustrated, validated, and compared against three different fuzzy MCDM methods (fuzzy VIKOR, fuzzy TOPSIS, and fuzzy ELECTRE in terms of its ranking performance. Also, the relationships between the compared methods and the proposed scenarios for fuzzy PROMETHEE are evaluated via the Spearman’s correlation coefficient. Styrene Maleic Anhydride and Polypropylene are determined optionally as suitable materials for the automotive instrument panel case. We propose a generic fuzzy MCDM methodology that can be practically implemented to material selection problem. The main advantages of the methodology are consideration of the vagueness, uncertainty, and fuzziness to decision making environment.

  10. Solving the Selective Multi-Category Parallel-Servicing Problem

    DEFF Research Database (Denmark)

    Range, Troels Martin; Lusby, Richard Martin; Larsen, Jesper

    In this paper we present a new scheduling problem and describe a shortest path based heuristic as well as a dynamic programming based exact optimization algorithm to solve it. The Selective Multi-Category Parallel-Servicing Problem (SMCPSP) arises when a set of jobs has to be scheduled on a server...... (machine) with limited capacity. Each job requests service in a prespecified time window and belongs to a certain category. Jobs may be serviced partially, incurring a penalty; however, only jobs of the same category can be processed simultaneously. One must identify the best subset of jobs to process...

  11. Solving the selective multi-category parallel-servicing problem

    DEFF Research Database (Denmark)

    Range, Troels Martin; Lusby, Richard Martin; Larsen, Jesper

    2015-01-01

    In this paper, we present a new scheduling problem and describe a shortest path-based heuristic as well as a dynamic programming-based exact optimization algorithm to solve it. The selective multi-category parallel-servicing problem arises when a set of jobs has to be scheduled on a server (machine......) with limited capacity. Each job requests service in a prespecified time window and belongs to a certain category. Jobs may be serviced partially, incurring a penalty; however, only jobs of the same category can be processed simultaneously. One must identify the best subset of jobs to process in each time...

  12. Psychological perspectives on gifted education – selected problems

    Directory of Open Access Journals (Sweden)

    Sękowski Andrzej

    2015-12-01

    Full Text Available The present article reviews the psychological literature on selected problems of gifted education. It discusses issues which are particularly important from the point of view of the skills and tools used by psychologists, educational specialists, teachers and tutors in their daily work with gifted children and adolescents. The problems described include diagnosis of giftedness in education, types of educational support provided to the gifted, and the requirements placed on teachers of gifted students. A particular emphasis is put on the contemporary research-related and practical challenges faced by gifted support specialists in schools.

  13. Partner Selection in Technological Licensing Agreements

    DEFF Research Database (Denmark)

    Laursen, Keld; Trombini, Giulia

    This paper investigates the matching of seller and buyer firms in the market for technology licensing. By combining organizational learning theory with the industrial organization approach, we propose a matching model in which technological similarities in terms of relatedness and familiarity work...... that is technologically unrelated, ex ante familiarity with the licensors’ technology is required. We contend also that there is interdependence between technological learning and market competition: if partners are in the same product markets, the likelihood of technology license contractual partnerships decreases...

  14. Technologies of Selective Energy Supply at Evaporation of Food Solutes

    Directory of Open Access Journals (Sweden)

    Burdo O.G.

    2017-04-01

    Full Text Available The aim of the research is to create innovative evaporating equipment that can produce concentrates with a high content of solids, with a low level of thermal effects on raw materials. The significance of the solution of technological problems of the key process of food technologies - concentration of liquid solutions (juices, extracts, etc. is shown. Problems and scientific contradictions are formulated and the hypothesis on using of electromagnetic energy sources for direct energy transfer to solution’s moisture has been offered. The prospects of such an energy effect are proved by the energy management methods. The schemes of fuel energy conversion for the conventional thermal concentration technology and the innovative plant based on the electromagnetic energy generators are presented. By means of the similarity theory the obtained model is transformed to the criterial one depicted kinetic of evaporation process at the electromagnetic field action. The dimensionless capacity of the plant is expressed by the dependence between the Energetic effect number and relative moisture content. The scheme of automated experimental system for study of the evaporation process in the microwave field is shown. The experimental results of juice evaporation are presented. It has been demonstrated that the technologies of selective energy supply represent an effective tool for improvement of juice concentration evaporative plants. The main result of the research is design of the evaporator that allows reaching juice concentrates with °brix 95 at the temperature as low as 35 °С, i.e. 2…3 times superior than traditional technologies.

  15. Fuzzy Portfolio Selection Problem with Different Borrowing and Lending Rates

    OpenAIRE

    Chen, Wei; Yang, Yiping; Ma, Hui

    2011-01-01

    As we know, borrowing and lending risk-free assets arise extensively in the theory and practice of finance. However, little study has ever investigated them in fuzzy portfolio problem. In this paper, the returns of each assets are assumed to be fuzzy variables, then following the mean-variance approach, a new possibilistic portfolio selection model with different interest rates for borrowing and lending is proposed, in which the possibilistic semiabsolute deviation of the return is used to...

  16. Darwinian algorithms and the Wason selection task: a factorial analysis of social contract selection task problems.

    Science.gov (United States)

    Platt, R D; Griggs, R A

    1993-08-01

    In four experiments with 760 subjects, the present study examined Cosmides' Darwinian algorithm theory of reasoning: specifically, its explanation of facilitation on the Wason selection task. The first experiment replicated Cosmides' finding of facilitation for social contract versions of the selection task, using both her multiple-problem format and a single-problem format. Experiment 2 examined performance on Cosmides' three main social contract problems while manipulating the perspective of the subject and the presence and absence of cost-benefit information. The presence of cost-benefit information improved performance in two of the three problems while the perspective manipulation had no effect. In Experiment 3, the cost-benefit effect was replicated; and performance on one of the three problems was enhanced by the presence of explicit negatives on the NOT-P and NOT-Q cards. Experiment 4 examined the role of the deontic term "must" in the facilitation observed for two of the social contract problems. The presence of "must" led to a significant improvement in performance. The results of these experiments are strongly supportive of social contract theory in that cost-benefit information is necessary for substantial facilitation to be observed in Cosmides' problems. These findings also suggest the presence of other cues that can help guide subjects to a deontic social contract interpretation when the social contract nature of the problem is not clear.

  17. Two-Stage Fuzzy Portfolio Selection Problem with Transaction Costs

    Directory of Open Access Journals (Sweden)

    Yanju Chen

    2015-01-01

    Full Text Available This paper studies a two-period portfolio selection problem. The problem is formulated as a two-stage fuzzy portfolio selection model with transaction costs, in which the future returns of risky security are characterized by possibility distributions. The objective of the proposed model is to achieve the maximum utility in terms of the expected value and variance of the final wealth. Given the first-stage decision vector and a realization of fuzzy return, the optimal value expression of the second-stage programming problem is derived. As a result, the proposed two-stage model is equivalent to a single-stage model, and the analytical optimal solution of the two-stage model is obtained, which helps us to discuss the properties of the optimal solution. Finally, some numerical experiments are performed to demonstrate the new modeling idea and the effectiveness. The computational results provided by the proposed model show that the more risk-averse investor will invest more wealth in the risk-free security. They also show that the optimal invested amount in risky security increases as the risk-free return decreases and the optimal utility increases as the risk-free return increases, whereas the optimal utility increases as the transaction costs decrease. In most instances the utilities provided by the proposed two-stage model are larger than those provided by the single-stage model.

  18. Supplier selection problem: A state-of-the-art review

    Directory of Open Access Journals (Sweden)

    Nilesh R. Ware

    2012-08-01

    Full Text Available In the global competitiveness and growing market environment, “Actual competition is not between firms against firm, than supplier against supplier”. Globally in the fastest market development world gets closer and closer. Consumers prefer fast delivery, economical product, excellent service and high quality product with desired service level. For successful management of this supply chain, supplier considered as the base source for all processes. Therefore, an efficient supplier selection and evaluation process needs to be incorporate. The main purpose of this paper is to provide an extensive state-of-the-art literature review and critique of the studies related to various aspects of supplier selection problem over the past two decades. Research papers appearing in the reputed and leading international journals from 1991 to 2011 are gathered and analyzed. Primary focus is given on more than 200 published and unpublished works. It has been referred extensively to carry out state-of-the-art review for supplier selection problem. Finally, paper provides future perspective based on current research trends available in the published literature.

  19. [Adolescents and new technologies: Behaviours pointing a possible addiction problem].

    Science.gov (United States)

    Labrador Encinas, Francisco Javier; Villadangos González, Silvia María

    2010-05-01

    The aim of this work is to evaluate adolescents' subjective risk perception derived from the use of the New Technologies (NT), and to identify behaviours or warning symptoms of possible addiction problems. A sample of 1,710 underage students of Madrid responded to the DENA questionnaire. Firstly, we found a positive correlation between the time of NT use and the perception of addiction problems. Also, age was positively correlated to these perception problems. Secondly, the results indicated that television is the technology that generates a major perception problem in underage students. Lastly, the NTs have produced behaviours that are similar to those produced by other established addictions. Among them are notable the relaxation caused by their use or discomfort if they cannot be used. In addition, the frequent presence of other behaviours exclusive to these instruments has been identified, such as constantly checking one's mobile phone screen. It is necessary to continue studying possible addictive behaviours specific to the NT.

  20. A new DEA-GAHP method for supplier selection problem

    Directory of Open Access Journals (Sweden)

    Behrooz Ahadian

    2012-10-01

    Full Text Available Supplier selection is one of the most important decisions made in supply chain management. Supplier evaluation problem has been in the center of supply chain researcher’s attention in these years. Managers regard some of these studies and methods inappropriate due to simple, weight scoring methods that generally are based on subjective opinions and judgments of decision maker units involved in the supplier evaluation process yielding imprecise and even unreliable results. This paper seeks to propose a methodology to integrate data envelopment analysis (DEA and group analytical hierarchy process (GAHP for evaluating and selecting the most efficient supplier. We develop a methodology, which consists of 6 steps, one by one has been introduced in lecture and finally applicability of proposed method is indicated by assessing 12 suppliers in a numerical example.

  1. Fuzzy Portfolio Selection Problem with Different Borrowing and Lending Rates

    Directory of Open Access Journals (Sweden)

    Wei Chen

    2011-01-01

    the returns of each assets are assumed to be fuzzy variables, then following the mean-variance approach, a new possibilistic portfolio selection model with different interest rates for borrowing and lending is proposed, in which the possibilistic semiabsolute deviation of the return is used to measure investment risk. The conventional probabilistic mean variance model can be transformed to a linear programming problem under possibility distributions. Finally, a numerical example is given to illustrate the modeling idea and the impact of borrowing and lending on optimal decision making.

  2. Risk calculations in the manufacturing technology selection process

    DEFF Research Database (Denmark)

    Farooq, S.; O'Brien, C.

    2010-01-01

    Purpose - The purpose of this paper is to present result obtained from a developed technology selection framework and provide a detailed insight into the risk calculations and their implications in manufacturing technology selection process. Design/methodology/approach - The results illustrated...... in the paper are the outcome of an action research study that was conducted in an aerospace company. Findings - The paper highlights the role of risk calculations in manufacturing technology selection process by elaborating the contribution of risk associated with manufacturing technology alternatives...... in the shape of opportunities and threats in different decision-making environments. Practical implications - The research quantifies the risk associated with different available manufacturing technology alternatives. This quantification of risk crystallises the process of technology selection decision making...

  3. Contributions to thermal and fluid dynamic problems in nuclear technology

    International Nuclear Information System (INIS)

    Mueller, U.; Krebs, L.; Rust, K.

    1984-02-01

    The majority of contributions compiled in this report deals with thermal and fluid dynamic problems in nuclear engineering. Especially problems of heat transfer and cooling are represented which may arise during and afer a loss-of-coolant accident both in light water reactors and in liquid metal cooled fast breeder reactors. Papers on the mass transfer in pressurized water, tribological problems in sodium cooled reactors, the fluid dynamics of pulsed column, and fundamental investigations of convective flows supplement these contributions on problems connected with accidents. Furthermore, a keynote paper presents the individual activities relating to the reliability of reactor components, a field recently included in our research program. Technical solutions to special problems are closely connected to the investigations based on experiments. Therefore, several contributions deal with new developments in technology and measuring techniques. (orig.) [de

  4. Designing Teaching Materials for Learning Problem Solving in Technology Education

    NARCIS (Netherlands)

    Doornekamp, B.G.

    In the process of designing teaching materials for learning problem solving in technology education, domain-specific design specifications are considered important elements to raise learning outcomes with these materials. Two domain-specific design specifications were drawn up using a four-step

  5. SUSTAINABILITY LOGISTICS BASING SCIENCE AND TECHNOLOGY OBJECTIVE DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT

    Science.gov (United States)

    2018-03-22

    BASING SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT by Gregg J. Gildea Paul D. Carpenter Benjamin J...Campbell William F. Harris* Michael A. McCluskey** and José A. Miletti*** *General Dynamics Information Technology Fairfax, VA 22030 **Maneuver...SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

  6. Digital literacy and problem solving in technology-rich environments

    Directory of Open Access Journals (Sweden)

    Vesna Dolničar

    2015-07-01

    Full Text Available Rapid development and progress, as well as the growing presence of information and communications technologies dictate the need for more highly developed digital skills in individuals. The paper focuses on the concepts of digital skills and problem solving in technology-rich environments. It examines these on the basis of empirical data obtained in the international study PIAAC. The introductory part presents an overview of the literature and the results of previous research in the field of measurement of digital skills, and data on the use of information society services among the EU Member States. The second part of the article refers to the results obtained in the study PIAAC. The results, confirmed by the results of other studies, showed the impact of age and education level on the problem solving in technology-rich environments. Article concludes with suggestions for improving the current state of integration of all population groups in training programs in the field of digital skills.

  7. Assessment of selected furnace technologies for RWMC waste

    International Nuclear Information System (INIS)

    Batdorf, J.; Gillins, R.; Anderson, G.L.

    1992-03-01

    This report provides a description and initial evaluation of five selected thermal treatment (furnace) technologies, in support of earlier thermal technologies scoping work for application to the Idaho National Engineering Laboratory Radioactive Waste Management Complex (RWMC) buried wastes. The cyclone furnace, molten salt processor, microwave melter, ausmelt (fuel fired lance) furnace, and molten metal processor technologies are evaluated. A system description and brief development history are provided. The state of development of each technology is assessed, relative to treatment of RWMC buried waste

  8. Enabling Problem Based Learning through Web 2.0 Technologies

    DEFF Research Database (Denmark)

    Tambouris, Efthimios; Panopoulou, Eleni; Tarabanis, Konstantinos

    2012-01-01

    of modern educational systems. Established pedagogical strategies, such as Problem Based Learning (PBL), are being adapted for online use in conjunction with modern Web 2.0 technologies and tools. However, even though Web 2.0 and progressive social-networking technologies are automatically associated......Advances in Information and Communications Technology (ICT), particularly the so-called Web 2.0, are affecting all aspects of our life: how we communicate, how we shop, how we socialise, and how we learn. Facilitating learning through the use of ICT, also known as eLearning, is a vital part...... with ideals such as collaboration, sharing, and active learning, it is also possible to use them in a very conservative, teacher-centred way limiting thus their impact. In this paper, we present a PBL 2.0 framework, i.e., a framework combining PBL practices with Web 2.0 technologies. More specifically, we (a...

  9. Reactor technology assessment and selection utilizing systems engineering approach

    Science.gov (United States)

    Zolkaffly, Muhammed Zulfakar; Han, Ki-In

    2014-02-01

    The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

  10. Wicked problems in space technology development at NASA

    Science.gov (United States)

    Balint, Tibor S.; Stevens, John

    2016-01-01

    Technological innovation is key to enable future space exploration missions at NASA. Technology development, however, is not only driven by performance and resource considerations, but also by a broad range of directly or loosely interconnected factors. These include, among others, strategy, policy and politics at various levels, tactics and programmatics, interactions between stakeholders, resource requirements, performance goals from component to system level, mission infusion targets, portfolio execution and tracking, and technology push or mission pull. Furthermore, at NASA, these influences occur on varying timescales and at diverse geographic locations. Such a complex and interconnected system could impede space technology innovation in this examined segment of the government environment. Hence, understanding the process through NASA's Planning, Programming, Budget and Execution cycle could benefit strategic thinking, planning and execution. Insights could be gained through suitable models, for example assessing the key drivers against the framework of Wicked Problems. This paper discusses NASA specific space technology innovation and innovation barriers in the government environment through the characteristics of Wicked Problems; that is, they do not have right or wrong solutions, only improved outcomes that can be reached through authoritative, competitive, or collaborative means. We will also augment the Wicked Problems model to account for the temporally and spatially coupled, and cyclical nature of this NASA specific case, and propose how appropriate models could improve understanding of the key influencing factors. In turn, such understanding may subsequently lead to reducing innovation barriers, and stimulating technology innovation at NASA. Furthermore, our approach can be adopted for other government-directed environments to gain insights into their structures, hierarchies, operational flow, and interconnections to facilitate circular dialogs towards

  11. Performance-Based Technology Selection Filter description report

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL)

  12. Performance-Based Technology Selection Filter description report

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

  13. Building Science and Technology Solutions for National Problems

    International Nuclear Information System (INIS)

    Bishop, Alan R.

    2012-01-01

    The nation's investment in Los Alamos has fostered scientific capabilities for national security missions. As the premier national security science laboratory, Los Alamos tackles: (1) Multidisciplinary science, technology, and engineering challenges; (2) Problems demanding unique experimental and computational facilities; and (3) Highly complex national security issues requiring fundamental breakthroughs. Our mission as a DOE national security science laboratory is to develop and apply science, technology, and engineering solutions that: (1) ensure the safety, security, and reliability of the US nuclear deterrent; (2) protect against the nuclear threat; and (3) solve national security challenges.

  14. Vulnerabilities in GSM technology and feasibility of selected attacks

    Science.gov (United States)

    Voznak, M.; Prokes, M.; Sevcik, L.; Frnda, J.; Toral-Cruz, Homer; Jakovlev, Sergej; Fazio, Peppino; Mehic, M.; Mikulec, M.

    2015-05-01

    Global System for Mobile communication (GSM) is the most widespread technology for mobile communications in the world and serving over 7 billion users. Since first publication of system documentation there has been notified a potential safety problem's occurrence. Selected types of attacks, based on the analysis of the technical feasibility and the degree of risk of these weaknesses, were implemented and demonstrated in laboratory of the VSB-Technical University of Ostrava, Czech Republic. These vulnerabilities were analyzed and afterwards possible attacks were described. These attacks were implemented using open-source tools, software programmable radio USRP (Universal Software RadioPeripheral) and DVB-T (Digital Video Broadcasting - Terrestrial) receiver. GSM security architecture is being scrutinized since first public releases of its specification mainly pointing out weaknesses in authentication and ciphering mechanisms. This contribution also summarizes practically proofed and used scenarios that are performed using opensource software tools and variety of scripts mostly written in Python. Main goal of this paper is in analyzing security issues in GSM network and practical demonstration of selected attacks.

  15. Preimage Selective Trapdoor Function: How to Repair an Easy Problem

    Directory of Open Access Journals (Sweden)

    Baocang Wang

    2014-01-01

    Full Text Available Public key cryptosystems are constructed by embedding a trapdoor into a one-way function. So, the one-wayness and the trapdoorness are vital to public key cryptography. In this paper, we propose a novel public key cryptographic primitive called preimage selective trapdoor function. This scenario allows to use exponentially many preimage to hide a plaintext even if the underlying function is not one-way. The compact knapsack problem is used to construct a probabilistic public key cryptosystem, the underlying encryption function of which is proven to be preimage selective trapdoor one-way functions under some linearization attack models. The constructive method can guarantee the noninjectivity of the underlying encryption function and the unique decipherability for ciphertexts simultaneously. It is heuristically argued that the security of the proposal cannot be compromised by a polynomial-time adversary even if the compact knapsack is easy to solve. We failed to provide any provable security results about the proposal; however, heuristic illustrations show that the proposal is secure against some known attacks including brute force attacks, linearization attacks, and key-recovery attacks. The proposal turns out to have acceptable key sizes and performs efficiently and hence is practical.

  16. [Evaluation and selection of VOCs treatment technologies in packaging and printing industry].

    Science.gov (United States)

    Wang, Hai-Lin; Wang, Jun-Hui; Zhu, Chun-Lei; Nie, Lei; Hao, Zheng-Ping

    2014-07-01

    Volatile organic compounds (VOCs) play an important role in urban air pollution. Activities of industries including the packaging and printing industries are regarded as the major sources. How to select the suitable treating techniques is the major problem for emission control. In this article, based on the VOCs emission characteristics of the packaging and printing industry and the existing treatment technologies, using the analytic hierarchy process (AHP) model, an evaluation system for VOCs selection was established and all the technologies used for treatment were assessed. It showed that the priority selection was in the following order: Carbon Fiber Adsorption-Desorption > Granular Carbon Adsorption-Desorption > Thermal Combustion > Regenerative Combustion > Catalytic combustion > Rotary adsorption-concentration and combustion > Granular Carbon adsorption-concentration and combustion. Carbon Fiber Adsorption-Desorption was selected as the best available technology due to its highest weight among those technologies.

  17. How and why actions are selected: action selection and the dark room problem

    Directory of Open Access Journals (Sweden)

    Venter Elmarie

    2016-04-01

    Full Text Available In this paper, I examine an evolutionary approach to the action selection problem and illustrate how it helps raise an objection to the predictive processing account. Clark examines the predictive processing account as a theory of brain function that aims to unify perception, action, and cognition, but - despite this aim - fails to consider action selection overtly. He off ers an account of action control with the implication that minimizing prediction error is an imperative of living organisms because, according to the predictive processing account, action is employed to fulfill expectations and reduce prediction error. One way in which this can be achieved is by seeking out the least stimulating environment and staying there (Friston et al. 2012: 2. Bayesian, neuroscientific, and machine learning approaches into a single framework whose overarching principle is the minimization of surprise (or, equivalently, the maximization of expectation. But, most living organisms do not find, and stay in, surprise free environments. This paper explores this objection, also called the “dark room problem”, and examines Clark’s response to the problem. Finally, I recommend that if supplemented with an account of action selection, Clark’s account will avoid the dark room problem.

  18. Selecting Advanced Software Technology in Two Small Manufacturing Enterprises

    National Research Council Canada - National Science Library

    Anderson, Bill; Estrin, Len; Buhman, Charles

    2004-01-01

    .... These challenges may include the lack of awareness of the specific technologies and commercial products available, the lack of ability to select the appropriate product, and the lack of skill sets...

  19. SELECTION OF SUSTAINABLE TECHNOLOGIES FOR COMBUSTION OF BOSNIAN COALS

    Directory of Open Access Journals (Sweden)

    Anes Kazagić

    2010-01-01

    Full Text Available This paper deals with optimization of coal combustion conditions to support selection a sustainable combustion technology and an optimal furnace and boiler design. A methodology for optimization of coal combustion conditions is proposed and demonstrated on the example of Bosnian coals. The properties of Bosnian coals vary widely from one coal basin to the next, even between coal mines within the same basin. Very high percentage of ash (particularly in Bosnian brown coal makes clear certain differences between Bosnian coal types and other world coal types, providing a strong argument for investigating specific problems related to the combustion of Bosnian coals, as well as ways to improve their combustion behaviour. In this work, options of the referent energy system (boiler with different process temperatures, corresponding to the different combustion technologies; pulverised fuel combustion (slag tap or dry bottom furnace and fluidized bed combustion, are under consideration for the coals tested. Sustainability assessment, based on calculation economic and environment indicators, in combination with common low cost planning method, is used for the optimization. The total costs in the lifetime are presented by General index of total costs, calculated on the base of agglomeration of basic economic indicators and the economic indicators derived from environmental indicators. So, proposed methodology is based on identification of those combustion technologies and combustion conditions for coals tested for which the total costs in lifetime of the system under consideration are lowest, provided that all environmental issues of the energy system is fulfilled during the lifetime. Inputs for calculation of the sustainability indicators are provided by the measurements on an experimental furnace with possibility of infinite variation of process temperature, supported by good praxis from the power plants which use the fuels tested and by thermal

  20. Enzyme technology: Key to selective biorefining

    DEFF Research Database (Denmark)

    Meyer, Anne S.

    2014-01-01

    to the reaction is a unique trait of enzyme catalysis. Since enzyme selectivity means that a specific reaction is catalysed between particular species to produce definite products, enzymes are particularly fit for converting specific compounds in mixed biomass streams. Since enzymes are protein molecules...... their rational use in biorefinery processes requires an understanding of the basic features of enzymes and reaction traits with respect to specificity, kinetics, reaction optima, stability and structure-function relations – we are now at a stage where it is possible to use nature’s enzyme structures as starting...... point and then improve the functional traits by targeted mutation of the protein. The talk will display some of our recent hypotheses related to enzyme action, recently obtained results within knowledge-based enzyme improvements as well as cast light on research methods used in optimizing enzyme...

  1. Benchmark Problems of the Geothermal Technologies Office Code Comparison Study

    Energy Technology Data Exchange (ETDEWEB)

    White, Mark D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Podgorney, Robert [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kelkar, Sharad M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McClure, Mark W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Danko, George [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ghassemi, Ahmad [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fu, Pengcheng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bahrami, Davood [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barbier, Charlotte [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cheng, Qinglu [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chiu, Kit-Kwan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Detournay, Christine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elsworth, Derek [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fang, Yi [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Furtney, Jason K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gan, Quan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gao, Qian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guo, Bin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hao, Yue [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horne, Roland N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huang, Kai [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Im, Kyungjae [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Norbeck, Jack [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rutqvist, Jonny [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Safari, M. R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sesetty, Varahanaresh [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sonnenthal, Eric [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tao, Qingfeng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); White, Signe K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wong, Yang [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xia, Yidong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-12-02

    A diverse suite of numerical simulators is currently being applied to predict or understand the performance of enhanced geothermal systems (EGS). To build confidence and identify critical development needs for these analytical tools, the United States Department of Energy, Geothermal Technologies Office has sponsored a Code Comparison Study (GTO-CCS), with participants from universities, industry, and national laboratories. A principal objective for the study was to create a community forum for improvement and verification of numerical simulators for EGS modeling. Teams participating in the study were those representing U.S. national laboratories, universities, and industries, and each team brought unique numerical simulation capabilities to bear on the problems. Two classes of problems were developed during the study, benchmark problems and challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. Study participants submitted solutions to problems for which their simulation tools were deemed capable or nearly capable. Some participating codes were originally developed for EGS applications whereas some others were designed for different applications but can simulate processes similar to those in EGS. Solution submissions from both were encouraged. In some cases, participants made small incremental changes to their numerical simulation codes to address specific elements of the problem, and in other cases participants submitted solutions with existing simulation tools, acknowledging the limitations of the code. The challenge problems were based on the enhanced geothermal systems research conducted at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995. The problems

  2. Problems of use of preliminary information technology in maritime passes

    Directory of Open Access Journals (Sweden)

    Elena I. Antonova

    2017-12-01

    Full Text Available The technology of preliminary informing is the priority direction of development of information technologies in the customs authorities. Russian model prior information on Maritime transport contains a number of features that distinguish it from world practice. The studied is the possibility of creating a unified information system of state regulatory bodies in the Maritime checkpoints. The article considers one of directions of automation of information interaction between Maritime stakeholders in the conduct of customs and other types of state control with the use of a single information space, based on the then-experimental solutions. Analysis of experience of implementation and operation of the software complex "Portal port" in the region of the Vladivostok customs have helped to identify problems in the application of the technology of preliminary information on Maritime transport. The proposed solutions to these problems provide an opportunity to work on improvement of this technology and to introduce mandatory preliminary notification in all sea checkpoints on the territory of the Russian Federation, will allow to optimize the performance of customs and other state Supervisory authorities at the seaport, us-blame the turnover and will contribute to the development of the far Eastern region as a whole.

  3. Evaluation of selected sewage sludge gasification technological parameters

    Science.gov (United States)

    Gałko, Grzegorz; Król, Danuta

    2018-02-01

    Evaluation of selected sewage sludge gasification technological parameters was shown in this paper. Degree of carbon conducted in combustible substance and syngas efficiency (technological readiness coefficient) in accordance with equations were calculated. Enthalpy of individual compounds formation and energy balance were calculated in accordance with rule of Hess.

  4. Institutional Distance and Partner Selection in International Technological Alliances

    NARCIS (Netherlands)

    Krammer, Marius

    2013-01-01

    This study posits that institutional distance has a negative influence on partner selection in international technological alliances. Empirical results based on a dataset of firms in the global tire industry confirm that firms prefer technological partners from closer cognitive, normative and

  5. The process of selecting technology development projects: a practical framework

    NARCIS (Netherlands)

    Herps, Joost M.J.; van Mal, Herman H.; Halman, Johannes I.M.; Martens, Jack H.M.; Borsboom, Ron H.M.

    2003-01-01

    In this article a practical framework is proposed, that can be used to organise the activities related to the selection-process of technology development projects. The framework is based upon recent literature and application at DAF Trucks Company. A technology development project has a long way to

  6. The process of selecting technology development projects : a practical framework

    NARCIS (Netherlands)

    Herps, J.M.J.; Mal, van H.H.; Halman, J.I.M.; Martens, J.H.M.; Borsboom, R.H.M.

    2003-01-01

    In this article a practical framework is proposed, that can be used to organise the activities related to the selection-process of technology development projects. The framework is based upon recent literature and application at DAF Trucks Company. A technology development project has a long way to

  7. Age differences in everyday problem-solving effectiveness: older adults select more effective strategies for interpersonal problems.

    Science.gov (United States)

    Blanchard-Fields, Fredda; Mienaltowski, Andrew; Seay, Renee Baldi

    2007-01-01

    Using the Everyday Problem Solving Inventory of Cornelius and Caspi, we examined differences in problem-solving strategy endorsement and effectiveness in two domains of everyday functioning (instrumental or interpersonal, and a mixture of the two domains) and for four strategies (avoidance-denial, passive dependence, planful problem solving, and cognitive analysis). Consistent with past research, our research showed that older adults were more problem focused than young adults in their approach to solving instrumental problems, whereas older adults selected more avoidant-denial strategies than young adults when solving interpersonal problems. Overall, older adults were also more effective than young adults when solving everyday problems, in particular for interpersonal problems.

  8. A Network Analysis Model for Selecting Sustainable Technology

    Directory of Open Access Journals (Sweden)

    Sangsung Park

    2015-09-01

    Full Text Available Most companies develop technologies to improve their competitiveness in the marketplace. Typically, they then patent these technologies around the world in order to protect their intellectual property. Other companies may use patented technologies to develop new products, but must pay royalties to the patent holders or owners. Should they fail to do so, this can result in legal disputes in the form of patent infringement actions between companies. To avoid such situations, companies attempt to research and develop necessary technologies before their competitors do so. An important part of this process is analyzing existing patent documents in order to identify emerging technologies. In such analyses, extracting sustainable technology from patent data is important, because sustainable technology drives technological competition among companies and, thus, the development of new technologies. In addition, selecting sustainable technologies makes it possible to plan their R&D (research and development efficiently. In this study, we propose a network model that can be used to select the sustainable technology from patent documents, based on the centrality and degree of a social network analysis. To verify the performance of the proposed model, we carry out a case study using actual patent data from patent databases.

  9. Evaluating the sustainable mining contractor selection problems: An imprecise last aggregation preference selection index method

    Directory of Open Access Journals (Sweden)

    Mohammad Panahi Borujeni

    2017-01-01

    Full Text Available The increasing complexity surrounding decision-making situations has made it inevitable for practitioners to apply ideas from a group of experts or decision makers (DMs instead of individuals. In a large proportion of recent studies, not enough attention has been paid to considering uncertainty in practical ways. In this paper, a hesitant fuzzy preference selection index (HFPSI method is proposed based on a new soft computing approach with risk preferences of DMs to deal with imprecise multi-criteria decision-making problems. Meanwhile, qualitative assessing criteria are considered in the process of the proposed method to help the DMs by providing suitable expressions of membership degrees for an element under a set. Moreover, the best alternative is selected based on considering the concepts of preference relation and hesitant fuzzy sets, simultaneously. Therefore, DMs' weights are determined according to the proposed hesitant fuzzy compromise solution technique to prevent judgment errors. Moreover, the proposed method has been extended based on the last aggregation method by aggregating the DMs' opinions during the last stage to avoid data loss. In this respect, a real case study about the mining contractor selection problem is provided to represent the effectiveness and efficiency of the proposed HFPSI method in practice. Then, a comparative analysis is performed to show the feasibility of the presented approach. Finally, sensitivity analysis is carried out to show the effect of considering the DMs' weights and last aggregation approach in a dispersion of the alternatives’ ranking values.

  10. Decision Analysis System for Selection of Appropriate Decontamination Technologies

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Boudreaux, J.F.; Chinta, S.; Zanakis, S.H.

    1998-01-01

    The principal objective for designing Decision Analysis System for Decontamination (DASD) is to support DOE-EM's endeavor to employ the most efficient and effective technologies for treating radiologically contaminated surfaces while minimizing personnel and environmental risks. DASD will provide a tool for environmental decision makers to improve the quality, consistency, and efficacy of their technology selection decisions. The system will facilitate methodical comparisons between innovative and baseline decontamination technologies and aid in identifying the most suitable technologies for performing surface decontamination at DOE environmental restoration sites

  11. Legitimation problems of participatory processes in technology assessment and technology policy.

    Science.gov (United States)

    Saretzki, Thomas

    2012-11-01

    Since James Carroll (1971) made a strong case for "participatory technology", scientists, engineers, policy-makers and the public at large have seen quite a number of different approaches to design and implement participatory processes in technology assessment and technology policy. As these participatory experiments and practices spread over the last two decades, one could easily get the impression that participation turned from a theoretical normative claim to a working practice that goes without saying. Looking beyond the well-known forerunners and considering the ambivalent experiences that have been made under different conditions in various places, however, the "if" and "how" of participation are still contested issues when questions of technology are on the agenda. Legitimation problems indicate that attempts to justify participation in a given case have not been entirely successful in the eyes of relevant groups among the sponsors, participants, organizers or observers. Legitimation problems of participatory processes in technology assessment and technology policy vary considerably, and they do so not only with the two domains and the ways of their interrelation or the specific features of the participatory processes. If we ask whether or not participation is seen as problematic in technology assessment and technology policy-making and in what sense it is being evaluated as problematic, then we find that the answer depends also on the approaches and criteria that have been used to legitimize or delegitimize the call for a specific design of participation.

  12. Deciphering Selectivity in Organic Reactions: A Multifaceted Problem.

    Science.gov (United States)

    Balcells, David; Clot, Eric; Eisenstein, Odile; Nova, Ainara; Perrin, Lionel

    2016-05-17

    Computational chemistry has made a sustained contribution to the understanding of chemical reactions. In earlier times, half a century ago, the goal was to distinguish allowed from forbidden reactions (e.g., Woodward-Hoffmann rules), that is, reactions with low or high to very high activation barriers. A great achievement of computational chemistry was also to contribute to the determination of structures with the bonus of proposing a rationalization (e.g., anomeric effect, isolobal analogy, Gillespie valence shell pair electron repulsion rules and counter examples, Wade-Mingos rules for molecular clusters). With the development of new methods and the constant increase in computing power, computational chemists move to more challenging problems, close to the daily concerns of the experimental chemists, in determining the factors that make a reaction both efficient and selective: a key issue in organic synthesis. For this purpose, experimental chemists use advanced synthetic and analytical techniques to which computational chemists added other ways of determining reaction pathways. The transition states and intermediates contributing to the transformation of reactants into the desired and undesired products can now be determined, including their geometries, energies, charges, spin densities, spectroscopy properties, etc. Such studies remain challenging due to the large number of chemical species commonly present in the reactive media whose role may have to be determined. Calculating chemical systems as they are in the experiment is not always possible, bringing its own share of complexity through the large number of atoms and the associated large number of conformers to consider. Modeling the chemical species with smaller systems is an alternative that historically led to artifacts. Another important topic is the choice of the computational method. While DFT is widely used, the vast diversity of functionals available is both an opportunity and a challenge. Though

  13. Stimulating technological innovation : problem identification and intervention formulation with the technological innovation systems framework

    OpenAIRE

    Kieft, A.C.

    2017-01-01

    The technological innovation systems (TIS) framework provides a theory to understand under what conditions technological innovations are successfully developed and implemented. The objective of this dissertation is to further strengthen this TIS intervention framework, which is the part of the TIS theoretical framework that facilitates the identification of inhibiting problems and the formulation of interventions. Theoretical adaptations and extensions are proposed and their merits subsequent...

  14. Solutions to selected exercise problems in quantum chemistry and spectroscopy

    DEFF Research Database (Denmark)

    Spanget-Larsen, Jens

    2016-01-01

    Suggested solutions to a number of problems from the collection "Exercise Problems in Quantum Chemistry and Spectroscopy", previously published on ResearchGate (DOI: 10.13140/RG.2.1.4024.8162).......Suggested solutions to a number of problems from the collection "Exercise Problems in Quantum Chemistry and Spectroscopy", previously published on ResearchGate (DOI: 10.13140/RG.2.1.4024.8162)....

  15. GREY STATISTICS METHOD OF TECHNOLOGY SELECTION FOR ADVANCED PUBLIC TRANSPORTATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Chien Hung WEI

    2003-01-01

    Full Text Available Taiwan is involved in intelligent transportation systems planning, and is now selecting its prior focus areas for investment and development. The high social and economic impact associated with which intelligent transportation systems technology are chosen explains the efforts of various electronics and transportation corporations for developing intelligent transportation systems technology to expand their business opportunities. However, there has been no detailed research conducted with regard to selecting technology for advanced public transportation systems in Taiwan. Thus, the present paper demonstrates a grey statistics method integrated with a scenario method for solving the problem of selecting advanced public transportation systems technology for Taiwan. A comprehensive questionnaire survey was conducted to demonstrate the effectiveness of the grey statistics method. The proposed approach indicated that contactless smart card technology is the appropriate technology for Taiwan to develop in the near future. The significance of our research results implies that the grey statistics method is an effective method for selecting advanced public transportation systems technologies. We feel our information will be beneficial to the private sector for developing an appropriate intelligent transportation systems technology strategy.

  16. Selected problems in power applications of high Tc superconductors

    DEFF Research Database (Denmark)

    Tønnesen, Ole; Pedersen, Niels Falsig

    2001-01-01

    Two important problems connected with power applications of BSCCO tapes are discussed: (i) the problem of developing prototypes when the tape properties are changing, and (ii) the problem of flux pinning in intrinsic BSCCO. An overview of the different projects on superconducting power cables is ...

  17. Educational Technologies in Problem-Based Learning in Health Sciences Education: A Systematic Review

    Science.gov (United States)

    Jin, Jun

    2014-01-01

    Background As a modern pedagogical philosophy, problem-based learning (PBL) is increasingly being recognized as a major research area in student learning and pedagogical innovation in health sciences education. A new area of research interest has been the role of emerging educational technologies in PBL. Although this field is growing, no systematic reviews of studies of the usage and effects of educational technologies in PBL in health sciences education have been conducted to date. Objective The aim of this paper is to review new and emerging educational technologies in problem-based curricula, with a specific focus on 3 cognate clinical disciplines: medicine, dentistry, and speech and hearing sciences. Analysis of the studies reviewed focused on the effects of educational technologies in PBL contexts while addressing the particular issue of scaffolding of student learning. Methods A comprehensive computerized database search of full-text articles published in English from 1996 to 2014 was carried out using 3 databases: ProQuest, Scopus, and EBSCOhost. Eligibility criteria for selection of studies for review were also determined in light of the population, intervention, comparison, and outcomes (PICO) guidelines. The population was limited to postsecondary education, specifically in dentistry, medicine, and speech and hearing sciences, in which PBL was the key educational pedagogy and curriculum design. Three types of educational technologies were identified as interventions used to support student inquiry: learning software and digital learning objects; interactive whiteboards (IWBs) and plasma screens; and learning management systems (LMSs). Results Of 470 studies, 28 were selected for analysis. Most studies examined the effects of learning software and digital learning objects (n=20) with integration of IWB (n=5) and LMS (n=3) for PBL receiving relatively less attention. The educational technologies examined in these studies were seen as potentially fit for

  18. Educational technologies in problem-based learning in health sciences education: a systematic review.

    Science.gov (United States)

    Jin, Jun; Bridges, Susan M

    2014-12-10

    As a modern pedagogical philosophy, problem-based learning (PBL) is increasingly being recognized as a major research area in student learning and pedagogical innovation in health sciences education. A new area of research interest has been the role of emerging educational technologies in PBL. Although this field is growing, no systematic reviews of studies of the usage and effects of educational technologies in PBL in health sciences education have been conducted to date. The aim of this paper is to review new and emerging educational technologies in problem-based curricula, with a specific focus on 3 cognate clinical disciplines: medicine, dentistry, and speech and hearing sciences. Analysis of the studies reviewed focused on the effects of educational technologies in PBL contexts while addressing the particular issue of scaffolding of student learning. A comprehensive computerized database search of full-text articles published in English from 1996 to 2014 was carried out using 3 databases: ProQuest, Scopus, and EBSCOhost. Eligibility criteria for selection of studies for review were also determined in light of the population, intervention, comparison, and outcomes (PICO) guidelines. The population was limited to postsecondary education, specifically in dentistry, medicine, and speech and hearing sciences, in which PBL was the key educational pedagogy and curriculum design. Three types of educational technologies were identified as interventions used to support student inquiry: learning software and digital learning objects; interactive whiteboards (IWBs) and plasma screens; and learning management systems (LMSs). Of 470 studies, 28 were selected for analysis. Most studies examined the effects of learning software and digital learning objects (n=20) with integration of IWB (n=5) and LMS (n=3) for PBL receiving relatively less attention. The educational technologies examined in these studies were seen as potentially fit for problem-based health sciences education

  19. SELECTING WORKING TEAMS FOR INFORMATION TECHNOLOGY OUTSOURCING PROJECTS THROUGH A COMBINATION OF METHODOLOGIES

    Directory of Open Access Journals (Sweden)

    María Alejandra Castellini

    Full Text Available ABSTRACT This paper deals with a problem that Information Technology outsourcing suppliers generally face when selecting a working team technically capable for specific roles in software development projects. A combination of methodologies, interactively integrated, is proposed. They are Soft System Methodology to structure the problem, Repertory Grid for individual interviews and elicitation of the selection criteria, DRV Processes to assess the candidates and to generate knowledge and consensus on the selection process and Linear Programming to assign people to each position. This multimethodology allowed finding a more comprehensive solution than that initially requested by the company, since it helped to establish the necessary transformations for the selection model to operate in the right way, set the competencies to be considered as selection criteria, develop a consensus estimate of the weighted criteria, and award global values to candidates, optimizing the assignment of roles in the group for the project.

  20. Developing a framework for energy technology portfolio selection

    Science.gov (United States)

    Davoudpour, Hamid; Ashrafi, Maryam

    2012-11-01

    Today, the increased consumption of energy in world, in addition to the risk of quick exhaustion of fossil resources, has forced industrial firms and organizations to utilize energy technology portfolio management tools viewed both as a process of diversification of energy sources and optimal use of available energy sources. Furthermore, the rapid development of technologies, their increasing complexity and variety, and market dynamics have made the task of technology portfolio selection difficult. Considering high level of competitiveness, organizations need to strategically allocate their limited resources to the best subset of possible candidates. This paper presents the results of developing a mathematical model for energy technology portfolio selection at a R&D center maximizing support of the organization's strategy and values. The model balances the cost and benefit of the entire portfolio.

  1. Problems forming innovative-technological image of russian regions

    Directory of Open Access Journals (Sweden)

    Irina Markovna Golova

    2012-06-01

    Full Text Available In this paper, actual problems of innovative-technological image as a key element of the mechanism of the healing sources of socioeconomic development of the Russian regionsare considered. The author gives an assessment of the level of differentiation of subjects of the Russian Federation on the potential for innovative development. Trends in spatial transformations of thescientific and technical and innovation capacities of the country are analyzedand reasons of low innovational activity of Russian enterprises are disclosed. Basic conditions for the success of actions to create an attractive image of innovative-technological territory are formulated. Special attention is paid to the position of regions as participants in the innovational processes, creating preconditions for creativity, harmonization of spatial priorities of innovation, technological and socio-economic development, support for the development of new high-tech industries, improvement of inter-budgetary relations. There are proved priority areas of state policy to reduce barriers to the realization of an innovative paradigm for development of Russian society and effective inclusion of local communities in the implementation of innovative changes.

  2. Selected Childrearing Tasks and Problems of Mothers and Fathers

    Science.gov (United States)

    Bartz, Karen W.

    1978-01-01

    Interviews with parents at two stages of the family life cycle provide comparable data on some tasks and problems of parenting. Differences in involvement and perception of problems are identified between mothers and fathers and parents in school-age and teen-age stages. Implications are drawn for parent education programs. (Author)

  3. Sustainable school infrastructure through effective innovative building technology selection

    CSIR Research Space (South Africa)

    Mphahlele, C

    2014-10-01

    Full Text Available The aim of the paper is to provide an overview of a model proposed for the selection Innovative Building Technologies (IBTs) and procurement of services supporting the erection of the IBTs that will ensure the construction of a sustainable school...

  4. Mapping of health technology assessment in selected countries

    NARCIS (Netherlands)

    Oortwijn, W.; Broos, P.; Vondeling, Hindrik; Banta, D.; Todorova, L.

    2013-01-01

    Objectives: The aim of this study was to develop and apply an instrument to map the level of health technology assessment (HTA) development at country level in selected countries. We examined middle-income countries (Argentina, Brazil, India, Indonesia, Malaysia, Mexico, and Russia) and countries

  5. Economics of selected water control technologies and their ...

    African Journals Online (AJOL)

    Using a production function, marginal productivity of farm inputs and benefit-cost analysis, we explore the economics of selected water control technologies. From the production function, all farm inputs, including irrigation water is found to have a significant and positive effect on yield. Marginal value products of farm inputs ...

  6. Biogas technology research in selected sub-Saharan African countries

    African Journals Online (AJOL)

    This reviews aims to provide an insight and update of the state of biogas technology research in some selected sub-Saharan African countries in peer reviewed literature. This paper also aims to highlight the sub-Saharan countries' strengths and weaknesses in biogas research and development capacity. An attempt is ...

  7. A software tool for soil clean-up technology selection

    International Nuclear Information System (INIS)

    Vranes, S.; Gonzalez-Valencia, E.; Lodolo, A.; Miertus, S.

    2002-01-01

    Soil remediation is a difficult, time-consuming and expensive operation. A variety of mature and emerging soil remediation technologies is available and future trends in remediation will include continued competition among environmental service companies and technology developers, which will definitely result in further increase in the clean-up options. Consequently, the demand has enhanced developing decision support tools that could help the decision makers to select the most appropriate technology for the specific contaminated site, before the costly remedial actions are taken. Therefore, a software tool for soil clean-up technology selection is currently being developed with the aim of closely working with human decision makers (site owners, local community representatives, environmentalists, regulators, etc.) to assess the available technologies and preliminarily select the preferred remedial options. The analysis for the identification of the best remedial options is based on technical, financial, environmental, and social criteria. These criteria are ranked by all involved parties to determine their relative importance for a particular project. (author)

  8. Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

    Science.gov (United States)

    Ancel, Ersin; Shih, Ann T.

    2014-01-01

    NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

  9. Using Technology and Assessment to Personalize Instruction: Preventing Reading Problems.

    Science.gov (United States)

    Connor, Carol McDonald

    2017-09-15

    Children who fail to learn to read proficiently are at serious risk of referral to special education, grade retention, dropping out of high school, and entering the juvenile justice system. Accumulating research suggests that instruction regimes that rely on assessment to inform instruction are effective in improving the implementation of personalized instruction and, in turn, student learning. However, teachers find it difficult to interpret assessment results in a way that optimizes learning opportunities for all of the students in their classrooms. This article focuses on the use of language, decoding, and comprehension assessments to develop personalized plans of literacy instruction for students from kindergarten through third grade, and A2i technology designed to support teachers' use of assessment to guide instruction. Results of seven randomized controlled trials demonstrate that personalized literacy instruction is more effective than traditional instruction, and that sustained implementation of personalized literacy instruction first through third grade may prevent the development of serious reading problems. We found effect sizes from .2 to .4 per school year, which translates into about a 2-month advantage. These effects accumulated from first through third grade with a large effect size (d = .7) equivalent to a full grade-equivalent advantage on standardize tests of literacy. These results demonstrate the efficacy of technology-supported personalized data-driven literacy instruction to prevent serious reading difficulties. Implications for translational prevention research in education and healthcare are discussed.

  10. Oil spill problems and sustainable response strategies through new technologies.

    Science.gov (United States)

    Ivshina, Irena B; Kuyukina, Maria S; Krivoruchko, Anastasiya V; Elkin, Andrey A; Makarov, Sergey O; Cunningham, Colin J; Peshkur, Tatyana A; Atlas, Ronald M; Philp, James C

    2015-07-01

    Crude oil and petroleum products are widespread water and soil pollutants resulting from marine and terrestrial spillages. International statistics of oil spill sizes for all incidents indicate that the majority of oil spills are small (less than 7 tonnes). The major accidents that happen in the oil industry contribute only a small fraction of the total oil which enters the environment. However, the nature of accidental releases is that they highly pollute small areas and have the potential to devastate the biota locally. There are several routes by which oil can get back to humans from accidental spills, e.g. through accumulation in fish and shellfish, through consumption of contaminated groundwater. Although advances have been made in the prevention of accidents, this does not apply in all countries, and by the random nature of oil spill events, total prevention is not feasible. Therefore, considerable world-wide effort has gone into strategies for minimising accidental spills and the design of new remedial technologies. This paper summarizes new knowledge as well as research and technology gaps essential for developing appropriate decision-making tools in actual spill scenarios. Since oil exploration is being driven into deeper waters and more remote, fragile environments, the risk of future accidents becomes much higher. The innovative safety and accident prevention approaches summarized in this paper are currently important for a range of stakeholders, including the oil industry, the scientific community and the public. Ultimately an integrated approach to prevention and remediation that accelerates an early warning protocol in the event of a spill would get the most appropriate technology selected and implemented as early as possible - the first few hours after a spill are crucial to the outcome of the remedial effort. A particular focus is made on bioremediation as environmentally harmless, cost-effective and relatively inexpensive technology. Greater

  11. Precious Metals in Automotive Technology: An Unsolvable Depletion Problem?

    Directory of Open Access Journals (Sweden)

    Ugo Bardi

    2014-04-01

    Full Text Available Since the second half of the 20th century, various devices have been developed in order to reduce the emissions of harmful substances at the exhaust pipe of combustion engines. In the automotive field, the most diffuse and best known device of this kind is the “three way” catalytic converter for engines using the Otto cycle designed to abate the emissions of carbon monoxide, nitrogen oxides and unburnt hydrocarbons. These catalytic converters can function only by means of precious metals (mainly platinum, rhodium and palladium which exist in a limited supply in economically exploitable ores. The recent increase in prices of all mineral commodities is already making these converters significantly expensive and it is not impossible that the progressive depletion of precious metals will make them too expensive for the market of private cars. The present paper examines how this potential scarcity could affect the technology of road transportation worldwide. We argue that the supply of precious metals for automotive converters is not at risk in the short term, but that in the future it will not be possible to continue using this technology as a result of increasing prices generated by progressive depletion. Mitigation methods such as reducing the amounts of precious metals in catalysts, or recycling them can help but cannot be considered as a definitive solution. We argue that precious metal scarcity is a critical factor that may determine the future development of road transportation in the world. As the problem is basically unsolvable in the long run, we must explore new technologies for road transportation and we conclude that it is likely that the clean engine of the future will be electric and powered by batteries.

  12. On the numerical treatment of selected oscillatory evolutionary problems

    Science.gov (United States)

    Cardone, Angelamaria; Conte, Dajana; D'Ambrosio, Raffaele; Paternoster, Beatrice

    2017-07-01

    We focus on evolutionary problems whose qualitative behaviour is known a-priori and exploited in order to provide efficient and accurate numerical schemes. For classical numerical methods, depending on constant coefficients, the required computational effort could be quite heavy, due to the necessary employ of very small stepsizes needed to accurately reproduce the qualitative behaviour of the solution. In these situations, it may be convenient to use special purpose formulae, i.e. non-polynomially fitted formulae on basis functions adapted to the problem (see [16, 17] and references therein). We show examples of special purpose strategies to solve two families of evolutionary problems exhibiting periodic solutions, i.e. partial differential equations and Volterra integral equations.

  13. System driven technology selection for future European launch systems

    Science.gov (United States)

    Baiocco, P.; Ramusat, G.; Sirbi, A.; Bouilly, Th.; Lavelle, F.; Cardone, T.; Fischer, H.; Appel, S.

    2015-02-01

    In the framework of the next generation launcher activity at ESA, a top-down approach and a bottom-up approach have been performed for the identification of promising technologies and alternative conception of future European launch vehicles. The top-down approach consists in looking for system-driven design solutions and the bottom-up approach features design solutions leading to substantial advantages for the system. The main investigations have been focused on the future launch vehicle technologies. Preliminary specifications have been used in order to permit sub-system design to find the major benefit for the overall launch system. The development cost, non-recurring and recurring cost, industrialization and operational aspects have been considered as competitiveness factors for the identification and down-selection of the most interesting technologies. The recurring cost per unit payload mass has been evaluated. The TRL/IRL has been assessed and a preliminary development plan has been traced for the most promising technologies. The potentially applicable launch systems are Ariane and VEGA evolution. The main FLPP technologies aim at reducing overall structural mass, increasing structural margins for robustness, metallic and composite containment of cryogenic hydrogen and oxygen propellants, propellant management subsystems, elements significantly reducing fabrication and operational costs, avionics, pyrotechnics, etc. to derive performing upper and booster stages. Application of the system driven approach allows creating performing technology demonstrators in terms of need, demonstration objective, size and cost. This paper outlines the process of technology down selection using a system driven approach, the accomplishments already achieved in the various technology fields up to now, as well as the potential associated benefit in terms of competitiveness factors.

  14. Selecting The Best Initial Method For A Transportation Problem ...

    African Journals Online (AJOL)

    This paper is concerned with determining the best initial method for a transportation problem. Seven initial methods are considered and compared. One is a new method that has not been reported in the literature. Comparison is done on the basis of the number of iterations required to reach the final solution if the concerned ...

  15. China's Environmental Problems: Selected Issues and Solutions in Context

    OpenAIRE

    Tisdell, Clem

    1996-01-01

    China has experienced outstanding economic growth in recent decades, but not without environmental problems and costs. Environmental costs have included increased air and water pollution, loss of natural vegetation cover and deforestation, soil erosion and a decline in the fertility of the soil and biodiversity loss. Consequently, some writers have questioned whether China’s rate of growth is environmentally sustainable and doubt if China will attain middle-income status in the next century b...

  16. Selected problems of protecting and managing historical ruins in Poland

    Directory of Open Access Journals (Sweden)

    Anna Fortuna-Marek

    2017-12-01

    Full Text Available Historical ruins have long been the object of interest for the research –workers of various disciplines as well as the conservators of historical monuments. The main problem is the form of protection. The standard of protecting ruins in the so-called permanent ruin form was elaborated two centuries ago, however, it is still the subject of numerous discussions, conferences, scientific-research works. The main source of doubts as to the permanent ruin is its incompleteness,(deficiency illegibility and the highly restricted possibilities of making any use of it, whereas the contemporary protection of monuments assumes their accessibility and the widest possible use for contemporary functions. That is why the main issue in contemporary maintenance of historical ruins is to ensure them a proper management system. The problem of protecting historical ruins has universal character. In Poland it concerns the resources of about 200 historical ruins, first and foremost of the mediaeval castles. That is why the Polish conservator circles have intensified the works aiming at the solution of the problem through the organization of programs, projects and conferences. A highly estimated result of those efforts is a programmatic document entitled “The Protection Charter of Historical Ruins”. It comprises a set of rules that determine the form of maintenance of historical ruins. However, the issues of management, development and use of the historical ruins still await a solution.

  17. Problems of selectivity in liquid-phase oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Emanuel, N M

    1978-07-01

    Based on a kinetic analysis of a generalized scheme for radical-chain process and on published experimental results, factors determining the selectivities of various liquid-phase oxidations of organic compounds are examined, including the kinetic chain length, molecular and chain decomposition of products, and competing routes in the initiated oxidation or autoxidation of hydrocarbons to peroxides. Also discussed are selective inhibition of undesirable routes in chain reactions, e.g., styrene and acetaldehyde co-oxidation; activation of molecular oxygen by variable-valence metal compounds used as homogeneous catalysts; modeling of fermentative processes by oxidation of hydrocarbons in complex catalytic systems, e.g., hydroxylation of alkanes, epoxidation or carbonylation of olefins, or oxidation of alcohols and ketones to acids; and the mechanisms of heterogeneous catalysis in liquid-phase reactions, e.g., oxidation of alkylaromatic hydrocarbons to peroxides and co-oxidation of propylene and acetaldehyde.

  18. Process for Selecting System Level Assessments for Human System Technologies

    Science.gov (United States)

    Watts, James; Park, John

    2006-01-01

    The integration of many life support systems necessary to construct a stable habitat is difficult. The correct identification of the appropriate technologies and corresponding interfaces is an exhaustive process. Once technologies are selected secondary issues such as mechanical and electrical interfaces must be addressed. The required analytical and testing work must be approached in a piecewise fashion to achieve timely results. A repeatable process has been developed to identify and prioritize system level assessments and testing needs. This Assessment Selection Process has been defined to assess cross cutting integration issues on topics at the system or component levels. Assessments are used to identify risks, encourage future actions to mitigate risks, or spur further studies.

  19. Technology selection for remediation of lead and hydrocarbon contaminated soil

    International Nuclear Information System (INIS)

    Richardson, K.E.; Sparks, G.M.

    1993-01-01

    This paper presents a methodology for selection of a technology for remediation of 70,000 tons of lead and hydrocarbon impacted soil resulting from an excavation at the Mobil Torrance Refinery. This methodology resulted from over two years of extensive research and technology evaluation. Twelve technologies and combination of technologies were evaluated, which often included bench scale testing, to determine the most cost effective and technically feasible remediation option. The results of the studies for each technology are discussed and presented in tabular form. The technologies investigated include: fixation/stabilization, soil washing, solvent washing, heap leach extraction, froth flotation, bioremediation, thermal desorption, electrokinetic extraction, asphalt incorporation, vitrification, off-site treatment, and off-site disposal. The associated costs and technical feasibility of each of the remediation options evaluated are presented. Laboratory analyses of the excavated soil indicate hydrocarbons range from non-detect to 11,000 ppm with an average of 2,600 ppm, soluble lead (CA test-not TCLP) range from 1.4 ppm to 100 ppm with an average of 29 ppm, and low levels of organic lead are present. Average grain size of the soil ranges from number-sign 200 to number-sign 120 mesh, and permeability averages 10--4 cm/sec. Significant odors, likely caused by hydrogen sulfide and thiophenes, were detected when the soil was excavated and control of odors during the remediation phase is a critical concern

  20. A Science-Technology-Society Paradigm and Cross River State Secondary School Students' Scientific Literacy: Problem Solving and Decision Making

    Science.gov (United States)

    Umoren, Grace

    2007-01-01

    The aim of this study was to investigate the effect of Science-Technology-Society (STS) curriculum on students' scientific literacy, problem solving and decision making. Four hundred and eighty (480) Senior Secondary two science and non-science students were randomly selected from intact classes in six secondary schools in Calabar Municipality of…

  1. Health information technology vendor selection strategies and total factor productivity.

    Science.gov (United States)

    Ford, Eric W; Huerta, Timothy R; Menachemi, Nir; Thompson, Mark A; Yu, Feliciano

    2013-01-01

    The aim of this study was to compare health information technology (HIT) adoption strategies' relative performance on hospital-level productivity measures. The American Hospital Association's Annual Survey and Healthcare Information and Management Systems Society Analytics for fiscal years 2002 through 2007 were used for this study. A two-stage approach is employed. First, a Malmquist model is specified to calculate hospital-level productivity measures. A logistic regression model is then estimated to compare the three HIT adoption strategies' relative performance on the newly constructed productivity measures. The HIT vendor selection strategy impacts the amount of technological change required of an organization but does not appear to have either a positive or adverse impact on technical efficiency or total factor productivity. The higher levels in technological change experienced by hospitals using the best of breed and best of suite HIT vendor selection strategies may have a more direct impact on the organization early on in the process. However, these gains did not appear to translate into either increased technical efficiency or total factor productivity during the period studied. Over a longer period, one HIT vendor selection strategy may yet prove to be more effective at improving efficiency and productivity.

  2. Diagrammatics lectures on selected problems in condensed matter theory

    CERN Document Server

    Sadovskii, Michael V

    2006-01-01

    The introduction of quantum field theory methods has led to a kind of "revolution" in condensed matter theory. This resulted in the increased importance of Feynman diagrams or diagram technique. It has now become imperative for professionals in condensed matter theory to have a thorough knowledge of this method.There are many good books that cover the general aspects of diagrammatic methods. At the same time, there has been a rising need for books that describe calculations and methodical "know how" of specific problems for beginners in graduate and postgraduate courses. This unique collection

  3. Physics and astrophysics a selection of key problems

    CERN Document Server

    Ginzburg, Vitalii Lazarevich

    2013-01-01

    Physics and Astrophysics discusses some major problems concerned with macrophysics. Such topics as the controlled thermonuclear fusion, high- temperature superconductivity, and metallic exciton liquid in semiconductors are covered. The definition and elements related to microphysics are discussed. This section focuses on mass spectrum, quarks and gluons, and the interaction of particles at high and super high energies. The book gives a brief overview of the general theory of relativity. The production and origin of gravitational waves are discussed in detail. Cosmology is the study of space an

  4. Regularization theory for ill-posed problems selected topics

    CERN Document Server

    Lu, Shuai

    2013-01-01

    Thismonograph is a valuable contribution to thehighly topical and extremly productive field ofregularisationmethods for inverse and ill-posed problems. The author is an internationally outstanding and acceptedmathematicianin this field. In his book he offers a well-balanced mixtureof basic and innovative aspects.He demonstrates new,differentiatedviewpoints, and important examples for applications. The bookdemontrates thecurrent developments inthe field of regularization theory,such as multiparameter regularization and regularization in learning theory. The book is written for graduate and PhDs

  5. New energy technology cope with global environmental problems

    International Nuclear Information System (INIS)

    Tsuchimoto, Tatsuya

    1991-01-01

    At present, the national and private storage of oil is the quantity for about 140 days in total, and it can cope with the temporary fear of oil supply, but if the Gulf War was prolonged, the large effect should be exerted to the energy supply. The reduction of the degree of oil dependence and the increase of the dependence on nonfossil fuel are taken up as the basic idea of the long term energy demand and supply in Japan. Also in the action plan for preventing global warming, the further promotion of energy conservation and the adoption of clean energy were decided to be carried out for decreasing carbon dioxide. In this report, among clean energies, the technology of electric power generation by sun beam, wind force and geotherm is described. The power generation by sun beam has many features, but the energy density is low, and the area for installation becomes large. The cost of power generation is relatively high. The power generation by wind force is superior in its environmental characteristics, and has been already put in practical use in USA and Europe. The problem is the reliability of the system. The geothermal power generation is available also in Japan, and is important for the energy security. The plants of about 270 MW are installed in Japan. (K.I.)

  6. Health-Care Waste Treatment Technology Selection Using the Interval 2-Tuple Induced TOPSIS Method

    Directory of Open Access Journals (Sweden)

    Chao Lu

    2016-06-01

    Full Text Available Health-care waste (HCW management is a major challenge for municipalities, particularly in the cities of developing nations. Selecting the best treatment technology for HCW can be regarded as a complex multi-criteria decision making (MCDM issue involving a number of alternatives and multiple evaluation criteria. In addition, decision makers tend to express their personal assessments via multi-granularity linguistic term sets because of different backgrounds and knowledge, some of which may be imprecise, uncertain and incomplete. Therefore, the main objective of this study is to propose a new hybrid decision making approach combining interval 2-tuple induced distance operators with the technique for order preference by similarity to an ideal solution (TOPSIS for tackling HCW treatment technology selection problems with linguistic information. The proposed interval 2-tuple induced TOPSIS (ITI-TOPSIS can not only model the uncertainty and diversity of the assessment information given by decision makers, but also reflect the complex attitudinal characters of decision makers and provide much more complete information for the selection of the optimum disposal alternative. Finally, an empirical example in Shanghai, China is provided to illustrate the proposed decision making method, and results show that the ITI-TOPSIS proposed in this paper can solve the problem of HCW treatment technology selection effectively.

  7. Parameter Subset Selection Techniques for Problems in Mathematical Biology

    DEFF Research Database (Denmark)

    Olsen, Christian; Smith, Ralph; Tran, Hien

    2015-01-01

    Patient-specific models for diagnostics and treatment planning require reliable parameter estimation and model predictions. Mathematical models of physiological systems are often formulated as systems of nonlinear ODEs with many parameters and few options for measuring all state variables....... Consequently, it can be difficult to determine which parameters can reliably be estimated from the available data. This investigation highlights some pitfalls associated with parameters that are unidentifiable in the sense that they are not uniquely determined by responses, and presents methods for recognizing...... and addressing identifiability problems. These methods quantify the magnitude of parameter influence through sensitivity analysis, and parameter interactions that might complicate unambiguous parameter estimation. The methods will be demonstrated using five examples of increasing complexity, as well...

  8. Decision Support Model for Selection Technologies in Processing of Palm Oil Industrial Liquid Waste

    Science.gov (United States)

    Ishak, Aulia; Ali, Amir Yazid bin

    2017-12-01

    The palm oil industry continues to grow from year to year. Processing of the palm oil industry into crude palm oil (CPO) and palm kernel oil (PKO). The ratio of the amount of oil produced by both products is 30% of the raw material. This means that 70% is palm oil waste. The amount of palm oil waste will increase in line with the development of the palm oil industry. The amount of waste generated by the palm oil industry if it is not handled properly and effectively will contribute significantly to environmental damage. Industrial activities ranging from raw materials to produce products will disrupt the lives of people around the factory. There are many alternative technologies available to process other industries, but problems that often occur are difficult to implement the most appropriate technology. The purpose of this research is to develop a database of waste processing technology, looking for qualitative and quantitative criteria to select technology and develop Decision Support System (DSS) that can help make decisions. The method used to achieve the objective of this research is to develop a questionnaire to identify waste processing technology and develop the questionnaire to find appropriate database technology. Methods of data analysis performed on the system by using Analytic Hierarchy Process (AHP) and to build the model by using the MySQL Software that can be used as a tool in the evaluation and selection of palm oil mill processing technology.

  9. Factors affecting the selection of a soil water sensing technology

    International Nuclear Information System (INIS)

    Hignett, C.T.

    2000-01-01

    Reviews of soil moisture measurement technologies are counterproductive in attempting to identify the single approach that has the best overall performance for a range of soil, crop and landscape conditions. Not only does such an approach preclude the addition of new technologies, but it also obscures the fact that we have available today sensors and technologies that cover most field conditions, are well understood in terms of technical capability and are mechanically and electronically reliable. This review defines decision-making processes for assessing the characteristics, good and bad, of technology in relation to project objectives. Two processes are needed. The first links soil texture and scale of variability with the nature of the project, single-plant to catchment scale, to the needs for soil water measurement. The second lists the capabilities of some devices and shows how they can be selected to accommodate necessary criteria. It is concluded that the 'best technology' is a function of the project and soil conditions. (author)

  10. Volvo and Infiniti drivers' experiences with select crash avoidance technologies.

    Science.gov (United States)

    Braitman, Keli A; McCartt, Anne T; Zuby, David S; Singer, Jeremiah

    2010-06-01

    Vehicle-based crash avoidance systems can potentially reduce crashes, but success depends on driver acceptance and understanding. This study gauged driver use, experience, and acceptance among early adopters of select technologies. Telephone interviews were conducted in early 2009 with 380 owners of Volvo vehicles equipped with forward collision warning with autobrake, lane departure warning, side-view assist, and/or active bi-xenon headlights and 485 owners of Infiniti vehicles with lane departure warning/prevention. Most owners kept systems turned on most of the time, especially forward collision warning with autobrake and side-view assist. The exception was lane departure prevention; many owners were unaware they had it, and the system must be activated each time the vehicle is started. Most owners reported being safer with the technologies and would want them again on their next vehicles. Perceived false or unnecessary warnings were fairly common, particularly with side-view assist. Some systems were annoying, especially lane departure warning. Many owners reported safer driving behaviors such as greater use of turn signals (lane departure warning), increased following distance (forward collision warning), and checking side mirrors more frequently (side-view assist), but some reported driving faster at night (active headlights). Despite some unnecessary or annoying warnings, most Volvo and Infiniti owners use crash avoidance systems most of the time. Among early adopters, the first requirement of effective warning systems (that owners use the technology) seems largely met. Systems requiring activation by drivers for each trip are used less often. Owner experience with the latest technologies from other automobile manufacturers should be studied, as well as for vehicles on which technologies are standard (versus optional) equipment. The effectiveness of technologies in preventing and mitigating crashes and injuries, and user acceptance of interfaces, should be

  11. Application of the maximal covering location problem to habitat reserve site selection: a review

    Science.gov (United States)

    Stephanie A. Snyder; Robert G. Haight

    2016-01-01

    The Maximal Covering Location Problem (MCLP) is a classic model from the location science literature which has found wide application. One important application is to a fundamental problem in conservation biology, the Maximum Covering Species Problem (MCSP), which identifies land parcels to protect to maximize the number of species represented in the selected sites. We...

  12. Route Selection Problem Based on Hopfield Neural Network

    Directory of Open Access Journals (Sweden)

    N. Kojic

    2013-12-01

    Full Text Available Transport network is a key factor of economic, social and every other form of development in the region and the state itself. One of the main conditions for transport network development is the construction of new routes. Often, the construction of regional roads is dominant, since the design and construction in urban areas is quite limited. The process of analysis and planning the new roads is a complex process that depends on many factors (the physical characteristics of the terrain, the economic situation, political decisions, environmental impact, etc. and can take several months. These factors directly or indirectly affect the final solution, and in combination with project limitations and requirements, sometimes can be mutually opposed. In this paper, we present one software solution that aims to find Pareto optimal path for preliminary design of the new roadway. The proposed algorithm is based on many different factors (physical and social with the ability of their increase. This solution is implemented using Hopfield's neural network, as a kind of artificial intelligence, which has shown very good results for solving complex optimization problems.

  13. Deconstructing Technological Literacy: Opening a Window to Problem Solving

    Science.gov (United States)

    Ward, Brandt

    2015-01-01

    In an environment of rapid and unpredictable change determined and directed by technologies that are constantly changing, the assumption that being technologically literate is the key to being a sustained, contributing life-long learner is well founded. However, technological literacy is seldom referred to or considered in academic arguments as a…

  14. Applying Digital Sensor Technology: A Problem-Solving Approach

    Science.gov (United States)

    Seedhouse, Paul; Knight, Dawn

    2016-01-01

    There is currently an explosion in the number and range of new devices coming onto the technology market that use digital sensor technology to track aspects of human behaviour. In this article, we present and exemplify a three-stage model for the application of digital sensor technology in applied linguistics that we have developed, namely,…

  15. Addressing selected problems of the modelling of digital control systems

    International Nuclear Information System (INIS)

    Sedlak, J.

    2004-12-01

    The introduction of digital systems to practical activities at nuclear power plants brings about new requirements for their modelling for the purposes of reliability analyses required for plant licensing as well as for inclusion into PSA studies and subsequent use in applications for the assessment of events, limits and conditions, and risk monitoring. It is very important to assess, both qualitatively and quantitatively, the effect of this change on operational safety. The report describes selected specific features of reliability analysis of digital system and recommends methodological procedures. The chapters of the report are as follows: (1) Flexibility and multifunctionality of the system. (2) General framework of reliability analyses (Understanding the system; Qualitative analysis; Quantitative analysis; Assessment of results, comparison against criteria; Documenting system reliability analyses; Asking for comments and their evaluation); and (3) Suitable reliability models (Reliability models of basic events; Monitored components with repair immediately following defect or failure; Periodically tested components; Constant unavailability (probability of failure to demand); Application of reliability models for electronic components; Example of failure rate decomposition; Example modified for diagnosis successfulness; Transfer of reliability analyses to PSA; Common cause failures - CCF; Software backup and CCF type failures, software versus hardware). (P.A.)

  16. Problem Based Learning: Application to Technology Education in Three Countries

    Science.gov (United States)

    Williams, P. John; Iglesias, Juan; Barak, Moshe

    2008-01-01

    An increasing variety of professional educational and training disciplines are now problem based (e.g., medicine, nursing, engineering, community health), and they may have a corresponding variety of educational objectives. However, they all have in common the use of problems in the instructional sequence. The problems may be as diverse as a…

  17. Low-level radioactive waste technology: a selected, annotated bibliography

    International Nuclear Information System (INIS)

    Fore, C.S.; Vaughan, N.D.; Hyder, L.K.

    1980-10-01

    This annotated bibliography of 447 references contains scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on environmental transport, disposal site, and waste treatment studies. The publication covers both domestic and foreign literature for the period 1952 to 1979. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology and Site Resources; Regulatory and Economic Aspects; Transportation Technology; Waste Production; and Waste Treatment. Specialized data fields have been incorporated into the data file to improve the ease and accuracy of locating pertinent references. Specific radionuclides for which data are presented are listed in the Measured Radionuclides field, and specific parameters which affect the migration of these radionuclides are presented in the Measured Parameters field. In addition, each document referenced in this bibliography has been assigned a relevance number to facilitate sorting the documents according to their pertinence to low-level radioactive waste technology. The documents are rated 1, 2, 3, or 4, with 1 indicating direct applicability to low-level radioactive waste technology and 4 indicating that a considerable amount of interpretation is required for the information presented to be applied. The references within each chapter are arranged alphabetically by leading author, corporate affiliation, or title of the document. Indexes are provide for (1) author(s), (2) keywords, (3) subject category, (4) title, (5) geographic location, (6) measured parameters, (7) measured radionuclides, and (8) publication description

  18. Low-level radioactive waste technology: a selected, annotated bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Fore, C.S.; Vaughan, N.D.; Hyder, L.K.

    1980-10-01

    This annotated bibliography of 447 references contains scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on environmental transport, disposal site, and waste treatment studies. The publication covers both domestic and foreign literature for the period 1952 to 1979. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology and Site Resources; Regulatory and Economic Aspects; Transportation Technology; Waste Production; and Waste Treatment. Specialized data fields have been incorporated into the data file to improve the ease and accuracy of locating pertinent references. Specific radionuclides for which data are presented are listed in the Measured Radionuclides field, and specific parameters which affect the migration of these radionuclides are presented in the Measured Parameters field. In addition, each document referenced in this bibliography has been assigned a relevance number to facilitate sorting the documents according to their pertinence to low-level radioactive waste technology. The documents are rated 1, 2, 3, or 4, with 1 indicating direct applicability to low-level radioactive waste technology and 4 indicating that a considerable amount of interpretation is required for the information presented to be applied. The references within each chapter are arranged alphabetically by leading author, corporate affiliation, or title of the document. Indexes are provide for (1) author(s), (2) keywords, (3) subject category, (4) title, (5) geographic location, (6) measured parameters, (7) measured radionuclides, and (8) publication description.

  19. Selection criteria for wastewater treatment technologies to protect drinking water.

    Science.gov (United States)

    von Sperling, M

    2000-01-01

    The protection of water bodies used as sources for drinking water is intimately linked to the adoption of adequate technologies for the treatment of the wastewater generated in the catchment area. The paper presents a general overview of the main technologies used for the treatment of domestic sewage, with a special emphasis on developing countries, and focussing on the main parameters of interest, such as BOD, coliforms and nutrients. A series of tables, figures and charts that can be used for the preliminary selection of treatment technologies is presented. The systems analysed are: stabilisation ponds, activated sludge, trickling filters, anaerobic systems and land disposal. Within each system, the main process variants are covered. Two summary tables are presented, one for quantitative analysis, including easily usable information based on per capita values (US$/cap, Watts/cap, m2 area/cap, m3 sludge/cap), and another for a qualitative comparison among the technologies, based on a one-to-five-star scoring system. The recent trend in tropical countries in the use of UASB (Upflow Anaerobic Sludge Blanket) reactors is also discussed.

  20. Low-level radioactive waste technology: a selected, annotated bibliography

    International Nuclear Information System (INIS)

    Fore, C.S.; Carrier, R.F.; Brewster, R.H.; Hyder, L.K.; Barnes, K.A.

    1981-10-01

    This annotated bibliography of 416 references represents the third in a series to be published by the Hazardous Materials Information Center containing scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on disposal site, environmental transport, and waste treatment studies as well as general reviews on the subject. The publication covers both domestic and foreign literature for the period 1951 to 1981. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology, and Site Resources; Regulatory and Economic Aspects; Social Aspects; Transportation Technology; Waste Production; and Waste Treatment. Entries in each of the chapters are further classified as a field study, laboratory study, theoretical study, or general overview involving one or more of these research areas

  1. Multi-criteria approach for selecting the best solid waste management technologies

    International Nuclear Information System (INIS)

    Latifah, A.M.; Hassan Basri; Noor Ezlin Ahmad Basri

    2010-01-01

    The growth in urbanization and industrial activities has caused solid waste management problems. As a solution the integrated approach has been chosen to manage the solid waste. Developing and implementing integrated solid waste management involve combined technologies and alternatives which are suitable with local laws condition. This research showed that Analytical Hierarchy Process (AHP) has the potential as a decision making tool that can be used in selecting process of solid waste management technology. Three levels hierarchy was developed with the goal at the top level, followed by criteria and alternatives. By using this technique, the priority of each considered technology will be determined where technology with the highest priority is more suitable to be developed. Sensitivity analysis was carried out to test the sensitivity of final decision towards inconsistency of judgement. Application of AHP to determine priority in selecting solid waste management technology was explained in this research based on a case study in the Port Dickson Municipal Council. Analysis of result showed that the combination of recycling technology and composting are suitable to be applied in the Port Dickson district. (author)

  2. Education and working life: VET adults' problem-solving skills in technology-rich environments

    OpenAIRE

    Hämäläinen, Raija; Wever, Bram De; Malin, Antero; Cincinnato, Sebastiano

    2015-01-01

    The rapidly-advancing technological landscape in the European workplace is challenging adults’ problem-solving skills. Workers with vocational education and training need flexible abilities to solve problems in technology-rich work settings. This study builds on Finnish PIAAC data to understand adults’ (N=4503) skills for solving problems in technology-rich environments. The results indicate the critical issue that more than two thirds of adults with vocational education and train...

  3. Evaluation of new energy technologies and the selection in Japan

    International Nuclear Information System (INIS)

    Oshima, Keiichi

    1977-01-01

    Since the oil shock in 1973, advanced countries pondered over the countermeasures regarding security, the circulation of foreign currency accumulating in oil-producing countries, and the lowering of the dependence on petroleum. Moreover, the problem of primary products, the aid to development, finance and debt were discussed with developing countries. The problem of energy is not that of short term, but the structural weakness and the contradiction of the energy problem were exposed in the form of the oil crisis. As for the general outlook during 10 years from now, the development of atomic energy slows down, the import of oil expands largely, and the production of coal is small, thus the prospect of using substitute energy is not so optimistic as before. The developments of breeder reactors, the utilization of solar energy and geothermal energy, and the technical development of using coal are discussed especially as the problems in Japan. Regarding environmental pollution, coal is highly problematic, and atomic energy is clean next to LNG. The dependence of atomic energy on foreign countries is low in view of the investment in foreign countries. As the selection feasible for Japan to fill the gap of energy demand and supply from 1985 to 2000, coal or atomic energy is to be used. The use of atomic energy in Japan is important for worldwide economy. (Kako, I.)

  4. The selection problem for discounted Hamilton–Jacobi equations: some non-convex cases

    KAUST Repository

    Gomes, Diogo A.; Mitake, Hiroyoshi; Tran, Hung V.

    2018-01-01

    Here, we study the selection problem for the vanishing discount approximation of non-convex, first-order Hamilton–Jacobi equations. While the selection problem is well understood for convex Hamiltonians, the selection problem for non-convex Hamiltonians has thus far not been studied. We begin our study by examining a generalized discounted Hamilton–Jacobi equation. Next, using an exponential transformation, we apply our methods to strictly quasi-convex and to some non-convex Hamilton–Jacobi equations. Finally, we examine a non-convex Hamiltonian with flat parts to which our results do not directly apply. In this case, we establish the convergence by a direct approach.

  5. The selection problem for discounted Hamilton–Jacobi equations: some non-convex cases

    KAUST Repository

    Gomes, Diogo A.

    2018-01-26

    Here, we study the selection problem for the vanishing discount approximation of non-convex, first-order Hamilton–Jacobi equations. While the selection problem is well understood for convex Hamiltonians, the selection problem for non-convex Hamiltonians has thus far not been studied. We begin our study by examining a generalized discounted Hamilton–Jacobi equation. Next, using an exponential transformation, we apply our methods to strictly quasi-convex and to some non-convex Hamilton–Jacobi equations. Finally, we examine a non-convex Hamiltonian with flat parts to which our results do not directly apply. In this case, we establish the convergence by a direct approach.

  6. A robust optimisation approach to the problem of supplier selection and allocation in outsourcing

    Science.gov (United States)

    Fu, Yelin; Keung Lai, Kin; Liang, Liang

    2016-03-01

    We formulate the supplier selection and allocation problem in outsourcing under an uncertain environment as a stochastic programming problem. Both the decision-maker's attitude towards risk and the penalty parameters for demand deviation are considered in the objective function. A service level agreement, upper bound for each selected supplier's allocation and the number of selected suppliers are considered as constraints. A novel robust optimisation approach is employed to solve this problem under different economic situations. Illustrative examples are presented with managerial implications highlighted to support decision-making.

  7. Mixed Waste Integrated Program -- Problem-oriented technology development

    International Nuclear Information System (INIS)

    Hart, P.W.; Wolf, S.W.; Berry, J.B.

    1994-01-01

    The Mixed Waste Integrated Program (MWIP) is responding to the need for DOE mixed waste treatment technologies that meet these dual regulatory requirements. MWIP is developing emerging and innovative treatment technologies to determine process feasibility. Technology demonstrations will be used to determine whether processes are superior to existing technologies in reducing risk, minimizing life-cycle cost, and improving process performance. Technology development is ongoing in technical areas required to process mixed waste: materials handling, chemical/physical treatment, waste destruction, off-gas treatment, final forms, and process monitoring/control. MWIP is currently developing a suite of technologies to process heterogeneous waste. One robust process is the fixed-hearth plasma-arc process that is being developed to treat a wide variety of contaminated materials with minimal characterization. Additional processes encompass steam reforming, including treatment of waste under the debris rule. Advanced off-gas systems are also being developed. Vitrification technologies are being demonstrated for the treatment of homogeneous wastes such as incinerator ash and sludge. An alternative to conventional evaporation for liquid removal--freeze crystallization--is being investigated. Since mercury is present in numerous waste streams, mercury removal technologies are being developed

  8. Solving Real-Life Problems: Future Mobile Technology Sophistication

    Directory of Open Access Journals (Sweden)

    FARHAN SHAFIQ

    2016-07-01

    Full Text Available Almost all the human being real life concerned domains are taking advantage of latest technologies for enhancing their process, procedures and operations. This integration of technological innovations provides ease of access, flexibility, transparency, reliability and speed for the concerned process and procedures. Rapid growth of ICT (Information and Communication Technology and MT (Mobile Technology provides opportunity to redesign and reengineered the human routines? life activities process and procedures. Technology integration and adoption in routine life activities may serves compensatory mechanism to assist the population in different manner such as monitoring older adults and children at homes, provides security assistance, monitoring and recording patients vital signs automatically, controlling and monitoring equipments and devices, providing assistance in shopping, banking and education as well. Disasters happened suddenly, destroy everything indiscriminately. Adoption and integration of latest technologies including ICT and MT can enhance the current disaster management process, procedures and operations. This research study focuses the impacts of latest and emerging technology trends in routine life activities and surrounds their potential strength to improve and enhance disaster management activities. MT is providing a promising platform for facilitating people to enhance their routine life activities. This research argue that integration and adoption of mobile computing in disaster management domain can enhance disaster management activities with promising minimizing error, quick information assembling, quick response based on technology manipulation and prioritizing action.

  9. Possibilities and problems in the development of home care technology

    NARCIS (Netherlands)

    Beekum, T. van; Banta, H.D.

    1989-01-01

    Limited resources for health care and increasing health care costs have led to proposals to expand home care services. Presently, home care technology is rather primitive. Its development and use have been largely unplanned. Nonetheless, home care technology is growing in response to obvious needs,

  10. Solving real-life problems: future mobile technology sophistication

    International Nuclear Information System (INIS)

    Shafiq, F.; Ahsan, K.; Nadeem, A.

    2016-01-01

    Almost all the human being real life concerned domains are taking advantage of latest technologies for enhancing their process, procedures and operations. This integration of technological innovations provides ease of access, flexibility, transparency, reliability and speed for the concerned process and procedures. Rapid growth of ICT (Information and Communication Technology) and MT (Mobile Technology) provides opportunity to redesign and re-engineered the human routines life activities process and procedures. Technology integration and adoption in routine life activities may serves compensatory mechanism to assist the population in different manner such as monitoring older adults and children at homes, provides security assistance, monitoring and recording patients vital signs automatically, controlling and monitoring equipments and devices, providing assistance in shopping, banking and education as well. Disasters happened suddenly, destroy everything indiscriminately. Adoption and integration of latest technologies including ICT and MT can enhance the current disaster management process, procedures and operations. This research study focuses the impacts of latest and emerging technology trends in routine life activities and surrounds their potential strength to improve and enhance disaster management activities. MT is providing a promising platform for facilitating people to enhance their routine life activities. This research argue that integration and adoption of mobile computing in disaster management domain can enhance disaster management activities with promising minimizing error, quick information assembling, quick response based on technology manipulation and prioritizing action. (author)

  11. Problems and Instruments of Product and Technological Diversification of Manufacturing

    Directory of Open Access Journals (Sweden)

    Kuzmin Oleg Ye.

    2015-03-01

    Full Text Available The purpose of the article involves identification of objectives and development of instruments for product and technological diversification aimed at updating the range of products and introducing innovative technologies, which will ensure a high level of competitiveness and create preconditions for steady development of the enterprise. As a result of studying the literary sources the objectives and instruments for development of enterprises by means of product and technological diversification have been defined. The article suggests effective instruments of product and technological diversification of manufacturing, namely: the model of expansion of the product range, multi-criteria model of optimization of the product range, a modified model of Kantorovich-Koopmans for implementing new production technologies with set limits on the product output. Further research relate to formation of instruments for manufacturing diversification by means of introducing new types of production.

  12. CONVERGENT (NBIC TECHNOLOGIES: PROBLEMS OF DEVELOPMENT AND TRANSFORMATIONAL POTENTIAL

    Directory of Open Access Journals (Sweden)

    И В Данилин

    2017-12-01

    Full Text Available Modern innovation policy is formed under strong influence of disruptive technologies con-cepts, which help mobilize support for Science and Technology (S&T policy, structure international S&T cooperation and system, etc. They are also important for the global processes, promising changes in leading powers cohort. This is why disruptive technology concepts are accented by the emerging economics, especially by BRIC nations. A concept of converging (or nano-bio-info-cognitive, also known as NBIC technologies is very illustrative. Being originally a part of the USA nanotechnology policy and transhumanistic discourse, it gradually evolved globally with focus on “Grand Challenges”. But, despite successes of technology convergence since 2000s, concept itself proved to be not fully operational, being mostly a metaphor for rising interdisciplinarity and discipline convergence. Nonetheless its revolutionary potential was meaningful, but linked not to technological, but institu-tional and socio-cultural dimensions. Among them were human capital development, changing logic of S&T organization, reforming S&T policies, formation of new culture and ethics of research and development, systemic development of national innovation systems. These ideas, implicitly present in the NBIC concept, were of a special importance for the emerging economies as key factors for their enforced growth and rising quality of development processes. But these issues were surprisingly weak articulated in NBIC concept. Partly that was the influence of transhumanist discourse with its escape from solving societal challenges by technological change of human self. Not less important was that NBIC were seen by elites as a mean to bypass deep reforms and buildup of innovation institutions. I.e., concepts of disruptive technologies represent a psychological sub-stitute for a really intense development. Uniqueness of NBIC is that it makes this contradiction very visible. As shown in

  13. The admissible portfolio selection problem with transaction costs and an improved PSO algorithm

    Science.gov (United States)

    Chen, Wei; Zhang, Wei-Guo

    2010-05-01

    In this paper, we discuss the portfolio selection problem with transaction costs under the assumption that there exist admissible errors on expected returns and risks of assets. We propose a new admissible efficient portfolio selection model and design an improved particle swarm optimization (PSO) algorithm because traditional optimization algorithms fail to work efficiently for our proposed problem. Finally, we offer a numerical example to illustrate the proposed effective approaches and compare the admissible portfolio efficient frontiers under different constraints.

  14. SOCP relaxation bounds for the optimal subset selection problem applied to robust linear regression

    OpenAIRE

    Flores, Salvador

    2015-01-01

    This paper deals with the problem of finding the globally optimal subset of h elements from a larger set of n elements in d space dimensions so as to minimize a quadratic criterion, with an special emphasis on applications to computing the Least Trimmed Squares Estimator (LTSE) for robust regression. The computation of the LTSE is a challenging subset selection problem involving a nonlinear program with continuous and binary variables, linked in a highly nonlinear fashion. The selection of a ...

  15. A Multiagent Evolutionary Algorithm for the Resource-Constrained Project Portfolio Selection and Scheduling Problem

    Directory of Open Access Journals (Sweden)

    Yongyi Shou

    2014-01-01

    Full Text Available A multiagent evolutionary algorithm is proposed to solve the resource-constrained project portfolio selection and scheduling problem. The proposed algorithm has a dual level structure. In the upper level a set of agents make decisions to select appropriate project portfolios. Each agent selects its project portfolio independently. The neighborhood competition operator and self-learning operator are designed to improve the agent’s energy, that is, the portfolio profit. In the lower level the selected projects are scheduled simultaneously and completion times are computed to estimate the expected portfolio profit. A priority rule-based heuristic is used by each agent to solve the multiproject scheduling problem. A set of instances were generated systematically from the widely used Patterson set. Computational experiments confirmed that the proposed evolutionary algorithm is effective for the resource-constrained project portfolio selection and scheduling problem.

  16. Comonotonic approximations for a generalized provisioning problem with application to optimal portfolio selection

    NARCIS (Netherlands)

    van Weert, K.; Dhaene, J.; Goovaerts, M.

    2011-01-01

    In this paper we discuss multiperiod portfolio selection problems related to a specific provisioning problem. Our results are an extension of Dhaene et al. (2005) [14], where optimal constant mix investment strategies are obtained in a provisioning and savings context, using an analytical approach

  17. Problems of method of technology assessment. A methodological analysis; Methodenprobleme des Technology Assessment; Eine methodologische Analyse

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, V

    1993-03-01

    The study undertakes to analyse the theoretical and methodological structure of Technology Assessment (TA). It is based on a survey of TA studies which provided an important condition for theoreticall sound statements on methodological aspects of TA. It was established that the main basic theoretical problems of TA are in the field of dealing with complexity. This is also apparent in the constitution of problems, the most elementary and central approach of TA. Scientifically founded constitution of problems and the corresponding construction of models call for interdisciplinary scientific work. Interdisciplinarity in the TA research process is achieved at the level of virtual networks, these networks being composed of individuals suited to teamwork. The emerging network structures have an objective-organizational and an ideational basis. The objective-organizational basis is mainly the result of team composition and the external affiliations of the team members. The ideational basis of the virtual network is represented by the team members` mode of thinking, which is individually located at a multidisciplinary level. The theoretical `skeleton` of the TA knowledge system, which is represented by process knowledge based linkage structures, can be generated and also processed in connection with the knowledge on types of problems, areas of analysis and procedures to deal with complexity. Within this process, disciplinary knowledge is a necessary but not a sufficient condition. Metatheoretical and metadisciplinary knowledge and the correspondingly processes complexity of models are the basis for the necessary methodological awareness, that allows TA to become designable as a research procedure. (orig./HP) [Deutsch] Die Studie stellt sich die Aufgabe, die theoretische und methodische Struktur des Technology Assessment (TA) zu analysieren. Sie fusst auf Erhebungen, die bei Technology-Assessment-Studien vorgenommen wurden und die wesentliche Voraussetzungen fuer

  18. Excavation Technology for Hard Rock - Problems and Prospects

    International Nuclear Information System (INIS)

    Gillani, S.T.A.; Butt, N.

    2009-01-01

    Civil engineering projects have greatly benefited from the mechanical excavation of hard rock technology. Mining industry, on the other hand, is still searching for major breakthroughs to mechanize and then automate the winning of ore and drivage of access tunnels in its metalliferous sector. The aim of this study is to extend the scope of drag bits for road headers in hard rock cutting. Various factors that can impose limitations on the potential applications of drag bits in hard rock mining are investigated and discussed along with alternative technology options. (author)

  19. Answers to selected problems in multivariable calculus with linear algebra and series

    CERN Document Server

    Trench, William F

    1972-01-01

    Answers to Selected Problems in Multivariable Calculus with Linear Algebra and Series contains the answers to selected problems in linear algebra, the calculus of several variables, and series. Topics covered range from vectors and vector spaces to linear matrices and analytic geometry, as well as differential calculus of real-valued functions. Theorems and definitions are included, most of which are followed by worked-out illustrative examples.The problems and corresponding solutions deal with linear equations and matrices, including determinants; vector spaces and linear transformations; eig

  20. QUANTITY DISCOUNTS IN SUPPLIER SELECTION PROBLEM BY USE OF FUZZY MULTI-CRITERIA PROGRAMMING

    Directory of Open Access Journals (Sweden)

    Tunjo Perić

    2011-02-01

    Full Text Available Supplier selection in supply chain is a multi-criteria problem that involves a number of quantitative and qualitative factors. This paper deals with a concrete problem of flour purchase by a company that manufactures bakery products and the purchasing price of flour depends on the quantity ordered. The criteria for supplier selection and quantities supplied by individual suppliers are: purchase costs, product quality and reliability of suppliers. The problem is solved using a model that combines revised weighting method and fuzzy multi-criteria linear programming (FMCLP. The paper highlights the efficiency of the proposed methodology in conditions when purchasing prices depend on order quantities.

  1. Religious Education and Information Technology: Challenges and Problems

    Science.gov (United States)

    Sajjadi, Seyed Mahdi

    2008-01-01

    With advances in information technology, the velocity of information production on the global level has expanded as well. This acceleration has led to the delegitimizing of knowledge, the equating of information with knowledge, and the giving of predominance to information rather than knowledge. This advance has created epistemological challenges…

  2. The problem of mystery in science and technology: a philosophical ...

    African Journals Online (AJOL)

    But now the contemporary man because of science and technology thinks he/she knows everything which leads to pride and arrogance - the ills of our society. Our method is textual analysis; it is a critical look at the works written on mysteries in order to learn from the mysteries, since we cannot understand it all through ...

  3. Technological risk: A problem of growing concern to government

    International Nuclear Information System (INIS)

    Jaeckel, H.

    1980-01-01

    The enumeration of rudimentary technological risks alone shows that the governments of the European states must provide both diagnosis and therapy if the continent is not to degenerate into something between a fully automated chamber of horrors and a sordid refuse dump. Each of the European countries has introduced a great deal of valuable legislation. These laws are clearly inadequate. (DG)

  4. Technology selection for offshore underwater small modular reactors

    International Nuclear Information System (INIS)

    Shivan, Koroush; Ballinger, Ronald; Buongiorno, Jacopo; Forsberg, Charles; Kazimi, Mujid; Todreas, Neil

    2016-01-01

    This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030-2040 time frame. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR) designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1) a lead-bismuth fast reactor based on the Russian SVBR-100; (2) a novel organic cooled reactor; (3) an innovative superheated water reactor; (4) a boiling water reactor based on Toshiba's LSBWR; and (5) an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical CO 2 cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50-80%) with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options

  5. Technology selection for offshore underwater small modular reactors

    Energy Technology Data Exchange (ETDEWEB)

    Shivan, Koroush; Ballinger, Ronald; Buongiorno, Jacopo; Forsberg, Charles; Kazimi, Mujid; Todreas, Neil [Dept. of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge (United States)

    2016-12-15

    This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030-2040 time frame. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR) designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1) a lead-bismuth fast reactor based on the Russian SVBR-100; (2) a novel organic cooled reactor; (3) an innovative superheated water reactor; (4) a boiling water reactor based on Toshiba's LSBWR; and (5) an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical CO{sub 2} cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50-80%) with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options.

  6. Technology Selection for Offshore Underwater Small Modular Reactors

    Directory of Open Access Journals (Sweden)

    Koroush Shirvan

    2016-12-01

    Full Text Available This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030–2040 timeframe. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1 a lead–bismuth fast reactor based on the Russian SVBR-100; (2 a novel organic cooled reactor; (3 an innovative superheated water reactor; (4 a boiling water reactor based on Toshiba's LSBWR; and (5 an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical CO2 cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50–80% with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options.

  7. Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

    Science.gov (United States)

    Rosmait, Russell L.

    1996-01-01

    The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

  8. Making Artificial Heart Components – Selected Aspects Of Casting Technology

    Directory of Open Access Journals (Sweden)

    Sobczak J.J.

    2015-09-01

    Full Text Available This study shown possibilities of Rapid Prototyping techniques (RP and metal casting simulation software (MCSS, including non inertial reference systems. RP and MCSS have been used in order to design and produce essential elements for artificial heart. Additionally it has been shown possibilities of Fused Deposition Modeling (FDM technique and DodJet technology using prototyped elements of rotodynamic pump. MAGMASOFT® software allowed to verify the cast kit heart valves model. Optical scanner Atos III enabled size verification of experimental elements supplied by rapid prototyping together with metal casting elements. Due to the selection of ceramic materials and assessment of molten metal – ceramic reactivity at high temperatures together with pattern materials selection model it was possible to design, manufacture a ceramic mould for titanium based alloys. The casting structure modification has been carried out by means of high isostatic pressure technique (HIP. The quality assessment of the casting materials has been performed using X-ray fluorescence (XRF, ARL 4460 Optical Emission Spectrometer, metallographic techniques and X-ray computed tomography.

  9. Prediction of shipboard electromagnetic interference (EMI) problems using artificial intelligence (AI) technology

    Science.gov (United States)

    Swanson, David J.

    1990-08-01

    The electromagnetic interference prediction problem is characteristically ill-defined and complicated. Severe EMI problems are prevalent throughout the U.S. Navy, causing both expected and unexpected impacts on the operational performance of electronic combat systems onboard ships. This paper focuses on applying artificial intelligence (AI) technology to the prediction of ship related electromagnetic interference (EMI) problems.

  10. The Factors Affecting Definition of Research Problems in Educational Technology Researches

    Science.gov (United States)

    Bahçekapili, Ekrem; Bahçekapili, Tugba; Fis Erümit, Semra; Göktas, Yüksel; Sözbilir, Mustafa

    2013-01-01

    Research problems in a scientific research are formed after a certain process. This process starts with defining a research topic and transforms into a specific research problem or hypothesis. The aim of this study was to examine the way educational technology researchers identify their research problems. To this end, sources that educational…

  11. Dysprosium, the balance problem, and wind power technology

    International Nuclear Information System (INIS)

    Elshkaki, Ayman; Graedel, T.E.

    2014-01-01

    Highlights: • We investigate the impacts of the increasing market share of wind power on the demand and supply of REE. • The analysis is carried out using a dynamic material flow and stock model and three scenarios for Dy supply. • The supply of Dy from all deposits will likely lead to an oversupply of the total REEs, Nd, La, Ce and Y. • The supply of Dy from critical REE or Dy rich deposits will likely lead to an oversupply of Ce and Y only. • Large quantities of thorium will be co-produced as a result of Dy demand that needs to be managed carefully. - Abstract: Wind power technology is one of the cleanest electricity generation technologies that are expected to have a substantial share in the future electricity mix. Nonetheless, the expected increase in the market share of wind technology has led to an increasing concern of the availability, production capacity and geographical concentration of the metals required for the technology, especially the rear earth elements (REE) neodymium (Nd) and the far less abundant dysprosium (Dy), and the impacts associated with their production. Moreover, Nd and Dy are coproduced with other rare earth metals mainly from iron, titanium, zirconium, and thorium deposits. Consequently, an increase in the demand for Nd and Dy in wind power technology and in their traditional applications may lead to an increase in the production of the host metals and other companion REE, with possible implications on their supply and demand. In this regard, we have used a dynamic material flow and stock model to study the impacts of the increasing demand for Nd and Dy on the supply and demand of the host metals and other companion REE. In one scenario, when the supply of Dy is covered by all current and expected producing deposits, the increase in the demand for Dy leads to an oversupply of 255 Gg of total REE and an oversupply of the coproduced REE Nd, La, Ce and Y. In the second and third scenarios, however, when the supply of Dy is

  12. A Proposed Model for Selecting Measurement Procedures for the Assessment and Treatment of Problem Behavior.

    Science.gov (United States)

    LeBlanc, Linda A; Raetz, Paige B; Sellers, Tyra P; Carr, James E

    2016-03-01

    Practicing behavior analysts frequently assess and treat problem behavior as part of their ongoing job responsibilities. Effective measurement of problem behavior is critical to success in these activities because some measures of problem behavior provide more accurate and complete information about the behavior than others. However, not every measurement procedure is appropriate for every problem behavior and therapeutic circumstance. We summarize the most commonly used measurement procedures, describe the contexts for which they are most appropriate, and propose a clinical decision-making model for selecting measurement produces given certain features of the behavior and constraints of the therapeutic environment.

  13. Problems of training in connection with the transfer of technology

    International Nuclear Information System (INIS)

    Ferry, M.; Hervet, J.

    1980-01-01

    The authors, who belong to the Training Department of the Technicatome Export Division, discuss the problems encountered in training foreign technicians and engineers and the way in which they can be overcome. The paper first lists the various phases in a training programme, which are a grounding in French (the effectiveness of which conditions everything that follows), adaptation of the basic knowledge of the trainees to nuclear problems and the acquisition of the relevant technical vocabulary, and a practical course at the laboratories of the CEA nuclear research centres and the various stages into which it is divided. The paper then discusses the specific difficulties involved in this form of training, such as problems of communication and difference in working practices. Lastly, emphasis is given to some of the more important points governing the success of the training, such as: the development of close collaboration between the requesting organization and the officials responsible for the training: choice of activities in the CEA laboratories (which requires thorough study); formulation of a training programme that enjoys the support of the trainee and stipulates standards by which to judge progress made; creation of an atmosphere of mutual trust between the trainee, his supervisor and the Training Department officials; and, lastly, keeping check on the implementation of the training. (author)

  14. A Review on influencing criteria for selecting supplier of information technology services in the hospital.

    Science.gov (United States)

    Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

    2014-01-01

    Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals.

  15. A Review on influencing criteria for selecting supplier of information technology services in the hospital

    Science.gov (United States)

    Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

    2014-01-01

    Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals. PMID:25540781

  16. solving the cell formation problem in group technology

    Directory of Open Access Journals (Sweden)

    Prafulla Joglekar

    2001-01-01

    Full Text Available Over the last three decades, numerous algorithms have been proposed to solve the work-cell formation problem. For practicing manufacturing managers it would be nice to know as to which algorithm would be most effective and efficient for their specific situation. While several studies have attempted to fulfill this need, most have not resulted in any definitive recommendations and a better methodology of evaluation of cell formation algorithms is urgently needed. Prima facie, the methodology underlying Miltenburg and Zhang's (M&Z (1991 evaluation of nine well-known cell formation algorithms seems very promising. The primary performance measure proposed by M&Z effectively captures the objectives of a good solution to a cell formation problem and is worthy of use in future studies. Unfortunately, a critical review of M&Z's methodology also reveals certain important flaws in M&Z's methodology. For example, M&Z may not have duplicated each algorithm precisely as the developer(s of that algorithm intended. Second, M&Z's misrepresent Chandrasekharan and Rajagopalan's [C&R's] (1986 grouping efficiency measure. Third, M&Z's secondary performance measures lead them to unnecessarily ambivalent results. Fourth, several of M&Z's empirical conclusions can be theoretically deduced. It is hoped that future evaluations of cell formation algorithms will benefit from both the strengths and weaknesses of M&Z's work.

  17. A Novel Hybrid Approach for Technology Selection in the Information Technology Industry

    Directory of Open Access Journals (Sweden)

    Nima Garoosi Mokhtarzadeh

    2018-03-01

    Full Text Available High-tech companies are rapidly growing in the world. Research and development (hereafter R&D department strength is the main asset that allows a firm to achieve a competitive advantage in high-tech businesses. The allocated budget to this sector is finite; thus, integration, human resource, risk and budget limitations should be considered to choose the most valuable project in the best portion of time. This paper investigates a case study from a high-tech company in Iran to prioritize the most attractive technologies for the R&D department. The case consists of twenty three technology options and the goal is to find the most attractive projects to sort them out for implementation in the R&D department. In this research, scholars proposed the best–worst method (henceforth BWM to find the weight of the criteria of the attractive technologies in first step and utilize the newly developed method total area based on orthogonal vectors (henceforward TAOV to sort the selected technologies based upon the identified criteria. Project integration is one of the least-noticed subjects in scientific papers; therefore, the researchers presented a zero or one linear programming (ZOLP model to optimize and schedule the implementation procedure on the project risk, budget and time limitation simultaneously. The results indicate that starting few but attractive projects in the first years and postponing the rest to the future, helps a firm to manage funds and gain profit with the least amount of risk.

  18. Reliable Portfolio Selection Problem in Fuzzy Environment: An mλ Measure Based Approach

    Directory of Open Access Journals (Sweden)

    Yuan Feng

    2017-04-01

    Full Text Available This paper investigates a fuzzy portfolio selection problem with guaranteed reliability, in which the fuzzy variables are used to capture the uncertain returns of different securities. To effectively handle the fuzziness in a mathematical way, a new expected value operator and variance of fuzzy variables are defined based on the m λ measure that is a linear combination of the possibility measure and necessity measure to balance the pessimism and optimism in the decision-making process. To formulate the reliable portfolio selection problem, we particularly adopt the expected total return and standard variance of the total return to evaluate the reliability of the investment strategies, producing three risk-guaranteed reliable portfolio selection models. To solve the proposed models, an effective genetic algorithm is designed to generate the approximate optimal solution to the considered problem. Finally, the numerical examples are given to show the performance of the proposed models and algorithm.

  19. DECISION SUPPORT CONCEPT TO MANAGEMENT OF CONSTRUCTION PROJECTS - PROBLEM OF CONSTRUCTION SITE SELECTION

    Directory of Open Access Journals (Sweden)

    Nikša Jajac

    2013-02-01

    Full Text Available The aim of this paper is to present Decision Support Concept (DSC for management of construction projects. Focus of our research is in application of multicritera methods (MCM to decision making in planning phase of construction projects (related to the problem of construction sites selection. The problem is identified as a significant one from many different aspects such as economic aspect, civil engineering aspect, etc. what indicates the necessity for evaluation of multiple sites by several different criteria. Therefore, DSC for construction site selection based on PROMETHEE method is designed. In order to define the appropriate criteria, their weights and preference functions for the concept, three groups of stakeholders are involved (investors, construction experts and experts for real estate market in its design. AHP method has been used for determination of criteria weights. The model has been tested on the problem of site selection for construction of residential-commercial building in four largest cities in Croatia.

  20. Ecology of Problem Individuals and the Efficacy of Selective Wildlife Management.

    Science.gov (United States)

    Swan, George J F; Redpath, Steve M; Bearhop, Stuart; McDonald, Robbie A

    2017-07-01

    As a result of ecological and social drivers, the management of problems caused by wildlife is becoming more selective, often targeting specific animals. Narrowing the sights of management relies upon the ecology of certain 'problem individuals' and their disproportionate contribution to impacts upon human interests. We assess the ecological evidence for problem individuals and confirm that some individuals or classes can be both disproportionately responsible and more likely to reoffend. The benefits of management can sometimes be short-lived, and selective management can affect tolerance of wildlife for better or worse, but, when effectively targeted, selective management can bring benefits by mitigating impact and conflict, often in a more socially acceptable way. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Science and technology related global problems: An international survey of science educators

    Science.gov (United States)

    Bybee, Rodger W.; Mau, Teri

    This survey evaluated one aspect of the Science-Technology-Society theme, namely, the teaching of global problems related to science and technology. The survey was conducted during spring 1984. Two hundred sixty-two science educators representing 41 countries completed the survey. Response was 80%. Findings included a ranking of twelve global problems (the top six were: World Hunger and Food Resources, Population Growth, Air Quality and Atmosphere, Water Resources, War Technology, and Human Health and Disease). Science educators generally indicated the following: the science and technology related global problems would be worse by the year 2000; they were slightly or moderately knowledgeable about the problems; print, audio-visual media, and personal experiences were their primary sources of information; it is important to study global problems in schools; emphasis on global problems should increase with age/grade level; an integrated approach should be used to teach about global problems; courses including global problems should be required of all students; most countries are in the early stages of developing programs including global problems; there is a clear trend toward S-T-S; there is public support for including global problems; and, the most significant limitations to implementation of the S-T-S theme (in order of significance) are political, personnel, social, psychological, economic, pedagogical, and physical. Implications for research and development in science education are discussed.

  2. Technology in the postindustrial society - a communication problem

    International Nuclear Information System (INIS)

    Kohtes, P.J.

    1990-01-01

    The author presents a summarizing view of the things we are letting ourselves in for on our way from the postindustrial to the postinformative and finally the postmaterial society: - Internationalization, 'stronger decentralization' and a 'multi-optional society' e.g. (pseudo)-individual wishes will be considered even more - awareness of the interlinkages in the world and the fact that all things are interdependent will grow - working life will be a combination of performance and pleasure - globally speaking it is much harder to prognosticate the economic development than the social one because it is not unreasonable to expect a severe crash of the world economy in the not too distant future. We all live in times which are a-changing. Let us be confident that these changes will bring about a better world - even through we see problems and imperfections whenever we take a closer look at things. (orig./HSCH) [de

  3. AN APPLICATION OF FUZZY PROMETHEE METHOD FOR SELECTING OPTIMAL CAR PROBLEM

    Directory of Open Access Journals (Sweden)

    SERKAN BALLI

    2013-06-01

    Full Text Available Most of the economical, industrial, financial or political decision problems are multi-criteria. In these multi criteria problems, optimal selection of alternatives is hard and complex process. Recently, some kinds of methods are improved to solve these problems. Promethee is one of most efficient and easiest method and solves problems that consist quantitative criteria.  However, in daily life, there are criteria which are explained as linguistic and cannot modeled numerical. Hence, Promethee method is incomplete for linguistic criteria which are imprecise. To satisfy this deficiency, fuzzy set approximation can be used. Promethee method, which is extended with using fuzzy inputs, is applied to car selection for seven different cars in same class by using criteria: price, fuel, performance and security. The obtained results are appropriate and consistent.

  4. Network models for solving the problem of multicriterial adaptive optimization of investment projects control with several acceptable technologies

    Science.gov (United States)

    Shorikov, A. F.; Butsenko, E. V.

    2017-10-01

    This paper discusses the problem of multicriterial adaptive optimization the control of investment projects in the presence of several technologies. On the basis of network modeling proposed a new economic and mathematical model and a method for solving the problem of multicriterial adaptive optimization the control of investment projects in the presence of several technologies. Network economic and mathematical modeling allows you to determine the optimal time and calendar schedule for the implementation of the investment project and serves as an instrument to increase the economic potential and competitiveness of the enterprise. On a meaningful practical example, the processes of forming network models are shown, including the definition of the sequence of actions of a particular investment projecting process, the network-based work schedules are constructed. The calculation of the parameters of network models is carried out. Optimal (critical) paths have been formed and the optimal time for implementing the chosen technologies of the investment project has been calculated. It also shows the selection of the optimal technology from a set of possible technologies for project implementation, taking into account the time and cost of the work. The proposed model and method for solving the problem of managing investment projects can serve as a basis for the development, creation and application of appropriate computer information systems to support the adoption of managerial decisions by business people.

  5. The Mixed Waste Management Facility: Technology selection and implementation plan, Part 2, Support processes

    International Nuclear Information System (INIS)

    Streit, R.D.; Couture, S.A.

    1995-03-01

    The purpose of this document is to establish the foundation for the selection and implementation of technologies to be demonstrated in the Mixed Waste Management Facility, and to select the technologies for initial pilot-scale demonstration. Criteria are defined for judging demonstration technologies, and the framework for future technology selection is established. On the basis of these criteria, an initial suite of technologies was chosen, and the demonstration implementation scheme was developed. Part 1, previously released, addresses the selection of the primary processes. Part II addresses process support systems that are considered ''demonstration technologies.'' Other support technologies, e.g., facility off-gas, receiving and shipping, and water treatment, while part of the integrated demonstration, use best available commercial equipment and are not selected against the demonstration technology criteria

  6. Physics Problems Based on Up-to-Date Science and Technology.

    Science.gov (United States)

    Folan, Lorcan M.; Tsifrinovich, Vladimir I.

    2007-03-01

    We observe a huge chasm between up-to-date science and undergraduate education. The result of this chasm is that current student interest in undergraduate science is low. Consequently, students who are graduating from college are often unable to take advantage of the many opportunities offered by science and technology. Cutting edge science and technology frequently use the methods learned in undergraduate courses, but up-to-date applications are not normally used as examples or for problems in undergraduate courses. There are many physics problems which contain information about the latest achievements in science and technology. But typically, the level of these problems is too advanced for undergraduates. We created physics problems for undergraduate science and engineering students, which are based on the latest achievements in science and technology. These problems have been successfully used in our courses at the Polytechnic University in New York. We believe that university faculty may suggest such problems in order to provide information about the frontiers of science and technological, demonstrate the importance of undergraduate physics in solving contemporary problems and raise the interest of talented students in science. From the other side, our approach may be considered an indirect way for advertising advanced technologies, which undergraduate students and, even more important, future college graduates could use in their working lives.

  7. The M-OLAP Cube Selection Problem: A Hyper-polymorphic Algorithm Approach

    Science.gov (United States)

    Loureiro, Jorge; Belo, Orlando

    OLAP systems depend heavily on the materialization of multidimensional structures to speed-up queries, whose appropriate selection constitutes the cube selection problem. However, the recently proposed distribution of OLAP structures emerges to answer new globalization's requirements, capturing the known advantages of distributed databases. But this hardens the search for solutions, especially due to the inherent heterogeneity, imposing an extra characteristic of the algorithm that must be used: adaptability. Here the emerging concept known as hyper-heuristic can be a solution. In fact, having an algorithm where several (meta-)heuristics may be selected under the control of a heuristic has an intrinsic adaptive behavior. This paper presents a hyper-heuristic polymorphic algorithm used to solve the extended cube selection and allocation problem generated in M-OLAP architectures.

  8. Dynamic supplier selection problem considering full truck load in probabilistic environment

    Science.gov (United States)

    Sutrisno, Wicaksono, Purnawan Adi

    2017-11-01

    In this paper, we propose a mathematical model in a probabilistic dynamic optimization to solve a dynamic supplier selection problem considering full truck load in probabilistic environment where some parameters are uncertain. We determine the optimal strategy for this problem by using stochastic dynamic programming. We give some numerical experiments to evaluate and analyze the model. From the results, the optimal supplier and the optimal product volume from the optimal supplier were determined for each time period.

  9. A Combined group EA-PROMETHEE method for a supplier selection problem

    Directory of Open Access Journals (Sweden)

    Hamid Reza Rezaee Kelidbari

    2016-07-01

    Full Text Available One of the important decisions which impacts all firms’ activities is the supplier selection problem. Since the 1950s, several works have addressed this problem by treating different aspects and instances. In this paper, a combined multiple criteria decision making (MCDM technique (EA-PROMETHEE has been applied to implement a proper decision making. To this aim, after reviewing the theoretical background regarding to supplier selection, the extension analysis (EA is used to determine the importance of criteria and PROMETHEE for appraisal of suppliers based on the criteria. An empirical example illustrated the proposed approach.

  10. Aircraft Loss of Control: Problem Analysis for the Development and Validation of Technology Solutions

    Science.gov (United States)

    Belcastro, Christine M.; Newman, Richard L.; Crider, Dennis A.; Klyde, David H.; Foster, John V.; Groff, Loren

    2016-01-01

    Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes. LOC can result from a wide spectrum of precursors (or hazards), often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and the validation process must provide a means of assessing system effectiveness and coverage of these hazards. This paper provides a detailed description of a methodology for analyzing LOC as a dynamics and control problem for the purpose of developing effective technology solutions. The paper includes a definition of LOC based on several recent publications, a detailed description of a refined LOC accident analysis process that is illustrated via selected example cases, and a description of planned follow-on activities for identifying future potential LOC risks and the development of LOC test scenarios. Some preliminary considerations for LOC of Unmanned Aircraft Systems (UAS) and for their safe integration into the National Airspace System (NAS) are also discussed.

  11. Stocking the genetic supermarket: reproductive genetic technologies and collective action problems.

    Science.gov (United States)

    Gyngell, Chris; Douglas, Thomas

    2015-05-01

    Reproductive genetic technologies (RGTs) allow parents to decide whether their future children will have or lack certain genetic predispositions. A popular model that has been proposed for regulating access to RGTs is the 'genetic supermarket'. In the genetic supermarket, parents are free to make decisions about which genes to select for their children with little state interference. One possible consequence of the genetic supermarket is that collective action problems will arise: if rational individuals use the genetic supermarket in isolation from one another, this may have a negative effect on society as a whole, including future generations. In this article we argue that RGTs targeting height, innate immunity, and certain cognitive traits could lead to collective action problems. We then discuss whether this risk could in principle justify state intervention in the genetic supermarket. We argue that there is a plausible prima facie case for the view that such state intervention would be justified and respond to a number of arguments that might be adduced against that view. © 2014 The Authors. Bioethics published by John Wiley & Sons Ltd.

  12. Integration of problem-based learning and innovative technology into a self-care course.

    Science.gov (United States)

    McFalls, Marsha

    2013-08-12

    To assess the integration of problem-based learning and technology into a self-care course. Problem-based learning (PBL) activities were developed and implemented in place of lectures in a self-care course. Students used technology, such as computer-generated virtual patients and iPads, during the PBL sessions. Students' scores on post-case quizzes were higher than on pre-case quizzes used to assess baseline knowledge. Student satisfaction with problem-based learning and the use of technology in the course remained consistent throughout the semester. Integrating problem-based learning and technology into a self-care course enabled students to become active learners.

  13. [Methodological problems in the use of information technologies in physical education].

    Science.gov (United States)

    Martirosov, E G; Zaĭtseva, G A

    2000-01-01

    The paper considers methodological problems in the use of computer technologies in physical education by applying diagnostic and consulting systems, educational and educational-and-training process automation systems, and control and self-control programmes for athletes and others.

  14. GeoMel Technologies. Providing technology solutions to environmental hazardous waste problems

    International Nuclear Information System (INIS)

    2003-01-01

    ,000 metric tons of contaminated materials on three continents. AMEC, under an exclusive agreement, is further developing the technologies and marketing and implementing them globally. GeoMelt offers significant advantages for site remediation and waste treatment: - Commercially proven at large scale; - Can treat mixed organic, inorganic and radioactive contaminants simultaneously; - Extremely high waste loadings; - Mobile for on-site or off-site use and can be performed in-situ or in a batch plant; - High tolerance for debris such as concrete, scrap metal, wood and plastic; - Treated mass is highly resistant to leaching and weathering; - Permitted by the U.S. EPA for the treatment of PCBs nation wide; - Selected in Australia as an alternative to incineration; - High degree of public and regulatory acceptance; - Treatment rates of up to 100 tons per day. In addition to GeoMelt, AMEC offers a complete range of other environmental and geotechnical services in North America and abroad from 90 Earth and Environmental offices. Globally, AMEC operates in 40 countries and is a leading provider of services and engineering solutions to the world's infrastructure, manufacturing and process industries. AMEC has been ranked as the leading international design firm by Engineering News- Record magazine. Learn more about GeoMelt at www.geomelt.com. For a list of office locations, company contacts and other services refer to: www.amec.com

  15. INVESTIGATING AND COMMUNICATING TECHNOLOGY MATHEMATICS PROBLEM SOLVING EXPERIENCE OF TWO PRESERVICE TEACHERS

    Directory of Open Access Journals (Sweden)

    Ana Kuzle

    2012-04-01

    Full Text Available In this paper, I report on preservice teachers’ reflections and perceptions on theirproblem-solving process in a technological context. The purpose of the study was to to investigatehow preservice teachers experience working individually in a dynamic geometry environment andhow these experiences affect their own mathematical activity when integrating content (nonroutineproblems and context (technology environment. Careful analysis of participants’ perceptionsregarding their thinking while engaged in problem solving, provided an opportunity to explorehow they explain the emergence of problem solving when working in a dynamic geometryenvironment. The two participants communicated their experience both through the lenses ofthemselves as problem solvers and as future mathematics educators. Moreover, the results of thestudy indicated that problem solving in a technology environment does not necessarily allow focuson decision-making, reflection, and problem solving processes as reported by previous research.

  16. PROBLEMS OF THE DEVELOPMENT OF ADVANCED TECHNOLOGIES: ROBOTICSL

    Directory of Open Access Journals (Sweden)

    A. E. Varshavsky

    2017-01-01

    Full Text Available Purpose: the purpose of the work is to consider the problems of development and the market of industrial and service robots.Methods: the methodology of the work is based on an analysis of application areas, new trends in the development of industrial and service robots, as well as development programs for robotics in the most developed countries, including the development of robotics in Russia.Results: the results of the work include the analysis of market indicators (global costs, data on the industrial robot market, including the forecast indicators of the markets for the main types of industrial robots, robot components, and on the market for service robots, a brief analysis of the program and directions for the development of robotics in leading countries, as well as data on the use and production of robots abroad and in Russia.Conclusions and relevance: the conclusion is reduced to the need for government bodies to provide effective coordination and necessary funding for research and development, which are of great importance for the country's economy as a whole and for the development of robotics, the implementation of a new structural policy based on long-term development priorities; accelerated recovery of leading manufacturing industries (machine-tool construction, radio-electronic industry, etc.; renewal of fixed capital, etc. The system of state priorities should be multi-level, covering industries andproductionat all levels of the hierarchy. It should also be taken into account that the robotics market is characterized by long, labor-intensive and capital-intensive stages of R&D and prototype development, so the orientation toward start-ups and the activity of certain groups of enthusiastic robot developers can not yield any tangible results for the Russian economy, that is it is necessary to develop and implement a very well elaborated state strategy.

  17. A modified genetic algorithm with fuzzy roulette wheel selection for job-shop scheduling problems

    Science.gov (United States)

    Thammano, Arit; Teekeng, Wannaporn

    2015-05-01

    The job-shop scheduling problem is one of the most difficult production planning problems. Since it is in the NP-hard class, a recent trend in solving the job-shop scheduling problem is shifting towards the use of heuristic and metaheuristic algorithms. This paper proposes a novel metaheuristic algorithm, which is a modification of the genetic algorithm. This proposed algorithm introduces two new concepts to the standard genetic algorithm: (1) fuzzy roulette wheel selection and (2) the mutation operation with tabu list. The proposed algorithm has been evaluated and compared with several state-of-the-art algorithms in the literature. The experimental results on 53 JSSPs show that the proposed algorithm is very effective in solving the combinatorial optimization problems. It outperforms all state-of-the-art algorithms on all benchmark problems in terms of the ability to achieve the optimal solution and the computational time.

  18. An Efficient Cost-Sensitive Feature Selection Using Chaos Genetic Algorithm for Class Imbalance Problem

    Directory of Open Access Journals (Sweden)

    Jing Bian

    2016-01-01

    Full Text Available In the era of big data, feature selection is an essential process in machine learning. Although the class imbalance problem has recently attracted a great deal of attention, little effort has been undertaken to develop feature selection techniques. In addition, most applications involving feature selection focus on classification accuracy but not cost, although costs are important. To cope with imbalance problems, we developed a cost-sensitive feature selection algorithm that adds the cost-based evaluation function of a filter feature selection using a chaos genetic algorithm, referred to as CSFSG. The evaluation function considers both feature-acquiring costs (test costs and misclassification costs in the field of network security, thereby weakening the influence of many instances from the majority of classes in large-scale datasets. The CSFSG algorithm reduces the total cost of feature selection and trades off both factors. The behavior of the CSFSG algorithm is tested on a large-scale dataset of network security, using two kinds of classifiers: C4.5 and k-nearest neighbor (KNN. The results of the experimental research show that the approach is efficient and able to effectively improve classification accuracy and to decrease classification time. In addition, the results of our method are more promising than the results of other cost-sensitive feature selection algorithms.

  19. Evaluation and selection of energy technologies using an integrated graph theory and analytic hierarchy process methods

    Directory of Open Access Journals (Sweden)

    P. B. Lanjewar

    2016-06-01

    Full Text Available The evaluation and selection of energy technologies involve a large number of attributes whose selection and weighting is decided in accordance with the social, environmental, technical and economic framework. In the present work an integrated multiple attribute decision making methodology is developed by combining graph theory and analytic hierarchy process methods to deal with the evaluation and selection of energy technologies. The energy technology selection attributes digraph enables a quick visual appraisal of the energy technology selection attributes and their interrelationships. The preference index provides a total objective score for comparison of energy technologies alternatives. Application of matrix permanent offers a better appreciation of the considered attributes and helps to analyze the different alternatives from combinatorial viewpoint. The AHP is used to assign relative weights to the attributes. Four examples of evaluation and selection of energy technologies are considered in order to demonstrate and validate the proposed method.

  20. Fuzzy Random λ-Mean SAD Portfolio Selection Problem: An Ant Colony Optimization Approach

    Science.gov (United States)

    Thakur, Gour Sundar Mitra; Bhattacharyya, Rupak; Mitra, Swapan Kumar

    2010-10-01

    To reach the investment goal, one has to select a combination of securities among different portfolios containing large number of securities. Only the past records of each security do not guarantee the future return. As there are many uncertain factors which directly or indirectly influence the stock market and there are also some newer stock markets which do not have enough historical data, experts' expectation and experience must be combined with the past records to generate an effective portfolio selection model. In this paper the return of security is assumed to be Fuzzy Random Variable Set (FRVS), where returns are set of random numbers which are in turn fuzzy numbers. A new λ-Mean Semi Absolute Deviation (λ-MSAD) portfolio selection model is developed. The subjective opinions of the investors to the rate of returns of each security are taken into consideration by introducing a pessimistic-optimistic parameter vector λ. λ-Mean Semi Absolute Deviation (λ-MSAD) model is preferred as it follows absolute deviation of the rate of returns of a portfolio instead of the variance as the measure of the risk. As this model can be reduced to Linear Programming Problem (LPP) it can be solved much faster than quadratic programming problems. Ant Colony Optimization (ACO) is used for solving the portfolio selection problem. ACO is a paradigm for designing meta-heuristic algorithms for combinatorial optimization problem. Data from BSE is used for illustration.

  1. Selection and Penalty Strategies for Genetic Algorithms Designed to Solve Spatial Forest Planning Problems

    International Nuclear Information System (INIS)

    Thompson, M.P.; Sessions, J.; Hamann, J.D.

    2009-01-01

    Genetic algorithms (GAs) have demonstrated success in solving spatial forest planning problems. We present an adaptive GA that incorporates population-level statistics to dynamically update penalty functions, a process analogous to strategic oscillation from the tabu search literature. We also explore performance of various selection strategies. The GA identified feasible solutions within 96%, 98%, and 93% of a non spatial relaxed upper bound calculated for landscapes of 100, 500, and 1000 units, respectively. The problem solved includes forest structure constraints limiting harvest opening sizes and requiring minimally sized patches of mature forest. Results suggest that the dynamic penalty strategy is superior to the more standard static penalty implementation. Results also suggest that tournament selection can be superior to the more standard implementation of proportional selection for smaller problems, but becomes susceptible to premature convergence as problem size increases. It is therefore important to balance selection pressure with appropriate disruption. We conclude that integrating intelligent search strategies into the context of genetic algorithms can yield improvements and should be investigated for future use in spatial planning with ecological goals.

  2. Examination of a Social Problem-Solving Intervention to Treat Selective Mutism

    NARCIS (Netherlands)

    O'Reilly, M.F.; McNally, D.; Sigafoos, J.; Lancioni, G.E.; Green, V.A.; Edrisinha, C.; Machalicek, W.A.; Sorrells, A.; Didden, H.C.M.

    2008-01-01

    The authors examined the use of a social problem-solving intervention to treat selective mutism with 2 sisters in an elementary school setting. Both girls were taught to answer teacher questions in front of their classroom peers during regular classroom instruction. Each girl received individualized

  3. Examination of a Social Problem-Solving Intervention to Treat Selective Mutism

    Science.gov (United States)

    O'Reilly, Mark; McNally, Deirdre; Sigafoos, Jeff; Lancioni, Giulio E.; Green, Vanessa; Edrisinha, Chaturi; Machalicek, Wendy; Sorrells, Audrey; Lang, Russell; Didden, Robert

    2008-01-01

    The authors examined the use of a social problem-solving intervention to treat selective mutism with 2 sisters in an elementary school setting. Both girls were taught to answer teacher questions in front of their classroom peers during regular classroom instruction. Each girl received individualized instruction from a therapist and was taught to…

  4. Population SAMC vs SAMC: Convergence and Applications to Gene Selection Problems

    KAUST Repository

    Faming Liang, Mingqi Wu

    2013-01-01

    The Bayesian model selection approach has been adopted by more and more people when analyzing a large data. However, it is known that the reversible jump MCMC (RJMCMC) algorithm, which is perhaps the most popular MCMC algorithm for Bayesian model selection, is prone to get trapped into local modes when the model space is complex. The stochastic approximation Monte Carlo (SAMC) algorithm essentially overcomes the local trap problem suffered by conventional MCMC algorithms by introducing a self-adjusting mechanism based on the past samples. In this paper, we propose a population SAMC (Pop-SAMC) algorithm, which works on a population of SAMC chains and can make use of crossover operators from genetic algorithms to further improve its efficiency. Under mild conditions, we show the convergence of this algorithm. Comparing to the single chain SAMC algorithm, Pop-SAMC provides a more efficient self-adjusting mechanism and thus can converge faster. The effectiveness of Pop-SAMC for Bayesian model selection problems is examined through a change-point identification problem and a gene selection problem. The numerical results indicate that Pop-SAMC significantly outperforms both the single chain SAMC and RJMCMC.

  5. Listening Diary in the Digital Age: Students' Material Selection, Listening Problems, and Perceived Usefulness

    Science.gov (United States)

    Chen, Cheryl Wei-yu

    2016-01-01

    The current study reports on a group of Taiwanese college students' first-person diary accounts of their private, transactional listening activities outside the classroom. Issues related to students' material selection, listening problems, and perceived usefulness of keeping a listening diary were explored. It was found that most students chose…

  6. Metacognition for strategy selection during arithmetic problem-solving in young and older adults.

    Science.gov (United States)

    Geurten, Marie; Lemaire, Patrick

    2018-04-19

    We examined participants' strategy choices and metacognitive judgments during arithmetic problem-solving. Metacognitive judgments were collected either prospectively or retrospectively. We tested whether metacognitive judgments are related to strategy choices on the current problems and on the immediately following problems, and age-related differences in relations between metacognition and strategy choices. Data showed that both young and older adults were able to make accurate retrospective, but not prospective, judgments. Moreover, the accuracy of retrospective judgments was comparable in young and older adults when participants had to select and execute the better strategy. Metacognitive accuracy was even higher in older adults when participants had to only select the better strategy. Finally, low-confidence judgments on current items were more frequently followed by better strategy selection on immediately succeeding items than high-confidence judgments in both young and older adults. Implications of these findings to further our understanding of age-related differences and similarities in adults' metacognitive monitoring and metacognitive regulation for strategy selection in the context of arithmetic problem solving are discussed.

  7. Varying Interpretations of Technology as a Problem in Markets for Customised High-Tech Products

    DEFF Research Database (Denmark)

    Vendelø, Morten Thanning; Constantiou, Ioanna

    2012-01-01

    satisfaction and create problems in the efficiency of technology use within the firm. This study investigates the potential of the inquiring dialogue approach for improving information sharing about technology interpretations held by the different parties. An empirical case study of a customised high...

  8. Effects of Online Problem-Based Learning on Teachers' Technology Perceptions and Planning

    Science.gov (United States)

    Nelson, Erik T.

    2007-01-01

    The purpose of this qualitative study was to examine the ways in which the experience of learning through an online problem-based learning (PBL) model affect teachers' perceptions of integrating technology. Participant reflections were collected and analyzed to identify the pros, cons, and challenges of learning technology integration through this…

  9. Meeting International Society for Technology in Education Competencies with a Problem-Based Learning Video Framework

    Science.gov (United States)

    Skoretz, Yvonne M.; Cottle, Amy E.

    2011-01-01

    Meeting International Society for Technology in Education competencies creates a challenge for teachers. The authors provide a problem-based video framework that guides teachers in enhancing 21st century skills to meet those competencies. To keep the focus on the content, the authors suggest teaching the technology skills only at the point the…

  10. Summer Teacher Enhancement Institute for Science, Mathematics, and Technology Using the Problem-Based Learning Model

    Science.gov (United States)

    Petersen, Richard H.

    1997-01-01

    The objectives of the Institute were: (a) increase participants' content knowledge about aeronautics, science, mathematics, and technology, (b) model and promote the use of scientific inquiry through problem-based learning, (c) investigate the use of instructional technologies and their applications to curricula, and (d) encourage the dissemination of TEI experiences to colleagues, students, and parents.

  11. Education Technologies in Addressing the Problem of Forming the Socially Active Individual

    Science.gov (United States)

    Popova, Irina N.

    2016-01-01

    The article is devoted to the analysis of technological support of the educational process in solving the problem of forming the socially active individual. The authors studied the value of the category "social activity" and analyzed educational technologies that have an impact on its formation. The obtained results gave the possibility…

  12. Problem structuring in Health Technology Assessment. An argumentative approach to increase its usefulness.

    NARCIS (Netherlands)

    Moret-Hartman, M.

    2008-01-01

    This thesis addresses the problem of the limited impact of Health Technology Assessment (HTA) research on health policy and clinical practice. HTA is a type of policy research that aims to provide information concerning medical technologies in order to support health care decision making. Although,

  13. Technological problems connected with execution of the protection sheets for nuclear power sets WWER-1000

    International Nuclear Information System (INIS)

    Hajutin, J.G.; Kriczewskij, A.Z.

    1977-01-01

    The choice of the structure and the prestressing system of the R.C. protection sheet for nuclear power sets WWER-1000 is motivated. The technological problems arised during the execution stage, as well as the technological line producing the tendons to prestress the structure by up winding are presented. (author)

  14. Technology Confidence, Competence and Problem Solving Strategies: Differences within Online and Face-to-Face Formats

    Science.gov (United States)

    Peterson, Sharon L.; Palmer, Louann Bierlein

    2011-01-01

    This study identified the problem solving strategies used by students within a university course designed to teach pre-service teachers educational technology, and whether those strategies were influenced by the format of the course (i.e., face-to-face computer lab vs. online). It also examined to what extent the type of problem solving strategies…

  15. Sino-US cooperation in water saving technologies: essential international problems

    Science.gov (United States)

    The United States and China share many agricultural problems, but one of great importance is the need to produce more crop yield in the face of water scarcity. Common recognition of this problem led to the development of a joint Sino-US Water Saving Technologies Flagship project within the larger US...

  16. Behavior Problems in Relation to Sustained Selective Attention Skills of Moderately Preterm Children.

    Science.gov (United States)

    Bul, Kim C M; van Baar, Anneloes L

    2012-04-01

    Attention skills may form an important developmental mechanism. A mediation model was examined in which behavioral problems of moderately preterm and term children at school age are explained by attention performance. Parents and teachers completed behavioral assessments of 348 moderately preterm children and 182 term children at 8 years of age. Children were administered a test of sustained selective attention. Preterm birth was associated with more behavioral and attention difficulties. Gestational age, prenatal maternal smoking, and gender were associated with mothers', fathers', and teachers' reports of children's problem behavior. Sustained selective attention partially mediated the relationship between birth status and problem behavior. Development of attention skills should be an important focus for future research in moderately preterm children.

  17. Risk-Controlled Multiobjective Portfolio Selection Problem Using a Principle of Compromise

    Directory of Open Access Journals (Sweden)

    Takashi Hasuike

    2014-01-01

    Full Text Available This paper proposes a multiobjective portfolio selection problem with most probable random distribution derived from current market data and other random distributions of boom and recession under the risk-controlled parameters determined by an investor. The current market data and information include not only historical data but also interpretations of economists’ oral and linguistic information, and hence, the boom and recession are often caused by these nonnumeric data. Therefore, investors need to consider several situations from most probable condition to boom and recession and to avoid the risk less than the target return in each situation. Furthermore, it is generally difficult to set random distributions of these cases exactly. Therefore, a robust-based approach for portfolio selection problems using the only mean values and variances of securities is proposed as a multiobjective programming problem. In addition, an exact algorithm is developed to obtain an explicit optimal portfolio using a principle of compromise.

  18. VET workers problem-solving skills in technology-rich environments: European approach

    OpenAIRE

    Hämäläinen, Raija

    2014-01-01

    The European workplace is challenging VET adults problem-solving skills in technology-rich environments (TREs). So far, no international large-scale assessment data has been available for VET. The PIAAC data comprise the most comprehensive source of information on adults skills to date. The present study (N=50 369) focuses on gaining insight into the problem-solving skills in TREs of adults with a VET background. When examining the similarities and differences in VET adults problem-solving sk...

  19. VET workers’ problem-solving skills in technology-rich environments: European approach

    OpenAIRE

    Hämäläinen, Raija; Cincinnato, Sebastiano; Malin, Antero; De Wever, Bram

    2014-01-01

    The European workplace is challenging VET adults’ problem-solving skills in technology-rich environments (TREs). So far, no international large-scale assessment data has been available for VET. The PIAAC data comprise the most comprehensive source of information on adults’ skills to date. The present study (N=50 369) focuses on gaining insight into the problem-solving skills in TREs of adults with a VET background. When examining the similarities and differences in VET adults’ problem-solving...

  20. TECHNOLOGICAL AND ENVIRONMENTAL PROBLEMS CONNECTED WITH THERMAL CONVERSION OF SEWAGE SLUDGE

    Directory of Open Access Journals (Sweden)

    Alina Żogała

    2016-02-01

    Full Text Available Overview of the most common technological and environmental problems connected with thermal conversion of sewage sludge was presented in the article. Such issues as the influence of content of moisture and mineral matter on fuel properties of sludge, problem of emission of pollutants, problem of management of solid residue, risk of corrosion, were described. Besides, consolidated characteristic of the most important methods of thermal conversion of sewage sludge, with their advantages and disadvantages, was presented in the paper.

  1. Stimulating technological innovation : problem identification and intervention formulation with the technological innovation systems framework

    NARCIS (Netherlands)

    Kieft, A.C.

    2017-01-01

    The technological innovation systems (TIS) framework provides a theory to understand under what conditions technological innovations are successfully developed and implemented. The objective of this dissertation is to further strengthen this TIS intervention framework, which is the part of the TIS

  2. Technology-Enhanced Problem-Based Learning Methodology in Geographically Dispersed Learners of Tshwane University of Technology

    Directory of Open Access Journals (Sweden)

    Sibitse M. Tlhapane

    2010-03-01

    Full Text Available Improving teaching and learning methodologies is not just a wish but rather strife for most educational institutions globally. To attain this, the Adelaide Tambo School of Nursing Science implemented a Technology-enhanced Problem-Based Learning methodology in the programme B Tech Occupational Nursing, in 2006. This is a two-year post-basic nursing program. The students are geographically dispersed and the curriculum design is the typically student-centred outcomes-based education. The research question posed by this paper is: How does technology-enhanced problem-based learning enhance student-centred learning, thinking skills, social skills and social space for learners? To answer the above question, a case study with both qualitative and quantitative data was utilised. The participants consisted of all students registered for the subject Occupational Health level 4. The sample group was chosen from willing participants from the Pretoria, eMalahleni and Polokwane learning sites, using the snowball method. This method was seen as appropriate due to the timing of the study. Data was collected using a questionnaire with both open and closed-ended questions. An analyses of the students‟ end of year examination was also done, including a comparison of performances by students on technology enhanced problem-based learning and those on problem-based learning only. The findings revealed that with Technology-enhanced Problem Based Learning (PBL, students‟ critical thinking, problem solving, and social skills improved and that social space was enhanced. This was supported by improved grades in students‟ on Technology-enhanced PBL as compared to those on PBL only.

  3. Employee problems and their consequences in the technology industry: evidence from surveys and counseling records.

    Science.gov (United States)

    Wang, Ching-Wen; Lin, Po-Chang; Sha, Chyuan

    2014-06-01

    To support employees' work and health, organizations should help employees cope with common problems. Previous studies have focused primarily on work-related problems across multiple industries rather than on evaluating industry-specific issues. Here, two approaches identified common work and non-work employee problems in the technology industry with the strongest correlations with psychosomatic health and life satisfaction. Study 1 used questionnaires to identify the problems that were perceived as the most frequent by lower-level employees (N = 355) working in the technology industry. Study 2 evaluated employees' coping behaviors by analyzing (with permission) counseling records collected from an employee assistance service company (N = 276). Employees reported a variety of problems; work problems were the only problems (of the top 5 problems) reported in both studies. Several problems emerged in the counseling records (e.g., legal issues, career development, family and marriage problems, and emotional problems) but not in the surveys. Future research should apply these observations to develop scales for measuring employee stressors.

  4. The Portrayal of Indonesian Image in 2007 Kompas Selected Short Stories: Social Problems, Criticisms and Hopes

    Directory of Open Access Journals (Sweden)

    Akun Akun

    2010-11-01

    Full Text Available Article aimed at exploring social problems reflected in 15 selected short stories printed in Kompas during 2007 both explicitly and implicitly. Specifically, this research is focused on the mapping of dominant social problems raised by the short stories, the social criticisms strongly voiced by the authors and the hopes of a better situation implicitly reflected in these interesting short stories. This study applies the Defamiliarization Effect promoted by Bertolt Brecht and Negative Dialectics or Negative Knowledge by Theodor Adorno, specifically in analyzing the literary works as a criticism tool. The result of the research shows that phenomena of social problems current lately in Indonesian context like identity, poverty, corruption, religious tensions, moral degradation, politics dirtiness, minority group problems, social security, natural disasters and the like are clearly seen and teased in these writings.

  5. Brownfields Technology Primer: Selecting and Using Phytoremediation for Site Cleanup

    Science.gov (United States)

    This primer explains the phytoremediation process, discusses the potential advantages and considerations in selecting phytoremediation to clean up brownfields sites, and provides information on additional resources about phytoremediation.

  6. Pedagogy and/or technology: Making difference in improving students' problem solving skills

    Science.gov (United States)

    Hrepic, Zdeslav; Lodder, Katherine; Shaw, Kimberly A.

    2013-01-01

    Pen input computers combined with interactive software may have substantial potential for promoting active instructional methodologies and for facilitating students' problem solving ability. An excellent example is a study in which introductory physics students improved retention, conceptual understanding and problem solving abilities when one of three weekly lectures was replaced with group problem solving sessions facilitated with Tablet PCs and DyKnow software [1,2]. The research goal of the present study was to isolate the effect of the methodology itself (using additional time to teach problem solving) from that of the involved technology. In Fall 2011 we compared the performance of students taking the same introductory physics lecture course while enrolled in two separate problem-solving sections. One section used pen-based computing to facilitate group problem solving while the other section used low-tech methods for one third of the semester (covering Kinematics), and then traded technologies for the middle third of the term (covering Dynamics). Analysis of quiz, exam and standardized pre-post test results indicated no significant difference in scores of the two groups. Combining this result with those of previous studies implies primacy of pedagogy (collaborative problem solving itself) over technology for student learning in problem solving recitations.

  7. APPLICATION OF THE PERFORMANCE SELECTION INDEX METHOD FOR SOLVING MACHINING MCDM PROBLEMS

    Directory of Open Access Journals (Sweden)

    Dušan Petković

    2017-04-01

    Full Text Available Complex nature of machining processes requires the use of different methods and techniques for process optimization. Over the past few years a number of different optimization methods have been proposed for solving continuous machining optimization problems. In manufacturing environment, engineers are also facing a number of discrete machining optimization problems. In order to help decision makers in solving this type of optimization problems a number of multi criteria decision making (MCDM methods have been proposed. This paper introduces the use of an almost unexplored MCDM method, i.e. performance selection index (PSI method for solving machining MCDM problems. The main motivation for using the PSI method is that it is not necessary to determine criteria weights as in other MCDM methods. Applicability and effectiveness of the PSI method have been demonstrated while solving two case studies dealing with machinability of materials and selection of the most suitable cutting fluid for the given machining application. The obtained rankings have good correlation with those derived by the past researchers using other MCDM methods which validate the usefulness of this method for solving machining MCDM problems.

  8. Influences on selection of assistive technology for young children in South Africa: perspectives from rehabilitation professionals.

    Science.gov (United States)

    van Niekerk, Karin; Dada, Shakila; Tönsing, Kerstin

    2017-12-20

    Selection of assistive technology for young children is a complex process. Within a context with limited resources, such as South Africa, research is needed to determine the factors influencing the assistive technology selection process, as these could ultimately either facilitate or hinder the availability and accessibility of affordable, adaptable, acceptable, and high quality assistive technology for this age group. Two asynchronous online focus groups were conducted with 16 rehabilitation professionals to identify the factors they perceived to influence the selection and provision of assistive technology to young children within the South African context. A process of deductive thematic analysis was followed by inductive analysis of the data. Components of the Assistive Technology Device Selection Framework were used as themes to guide the deductive analysis, followed by inductive analysis to create subthemes. The important role of the professional was highlighted in negotiating all the factors to consider in the assistive technology selection and provision process. Adaptation of the Assistive Technology Device Selection Framework is suggested in order to facilitate application to low resourced contexts, such as South Africa. Implications for rehabilitation Assistive technology selection is a complex process with factors pertaining to the users (child and family) of the assistive technology, as well as the rehabilitation professional recommending the assistive technology influencing the process. Although it may be an important factor, the availability of financial resources to purchase assistive technology is not the only determining factor in providing appropriate assistive technology to young children in contexts with limited resources. Formalized support, such as reflective supervision or mentorship programs should be facilitated and utilized by recommending professionals. Home and school visits during assessment ensure a good match between assistive

  9. A hybrid method for information technology selection combining multi-criteria decision making (MCDM) with technology roadmapping

    OpenAIRE

    García Mejía, Jaime Andrés

    2013-01-01

    Abstract: Strategic information technology (IT) management has been recognized as vital for achieving competitive advantage. IT selection, the process of choosing the best technology alternative from a number of available options, is an important part of IT management. The IT selection is a multi-criteria decision making process, where relative importance of each criterion is determined and the degree of satisfaction of every criterion from each alternative is evaluated. Decision makers (DMs)...

  10. A Hybrid Neutrosophic Group ANP-TOPSIS Framework for Supplier Selection Problems

    Directory of Open Access Journals (Sweden)

    Mohamed Abdel-Basset

    2018-06-01

    Full Text Available One of the most significant competitive strategies for organizations is sustainable supply chain management (SSCM. The vital part in the administration of a sustainable supply chain is the sustainable supplier selection, which is a multi-criteria decision-making issue, including many conflicting criteria. The valuation and selection of sustainable suppliers are difficult problems due to vague, inconsistent and imprecise knowledge of decision makers. In the literature on supply chain management for measuring green performance, the requirement for methodological analysis of how sustainable variables affect each other, and how to consider vague, imprecise and inconsistent knowledge, is still unresolved. This research provides an incorporated multi-criteria decision-making procedure for sustainable supplier selection problems (SSSPs. An integrated framework is presented via interval-valued neutrosophic sets to deal with vague, imprecise and inconsistent information that exists usually in real world. The analytic network process (ANP is employed to calculate weights of selected criteria by considering their interdependencies. For ranking alternatives and avoiding additional comparisons of analytic network processes, the technique for order preference by similarity to ideal solution (TOPSIS is used. The proposed framework is turned to account for analyzing and selecting the optimal supplier. An actual case study of a dairy company in Egypt is examined within the proposed framework. Comparison with other existing methods is implemented to confirm the effectiveness and efficiency of the proposed approach.

  11. Technology-enabled employee selection: Tweaking the system for better person-environment fit

    DEFF Research Database (Denmark)

    Holm, Anna B.

    Organizations increasingly use information and communication technologies to facilitate their employee selection process. The practice is commonly referred to as e-selection. Recent research has shown that e-selection can significantly improve the efficiency of assessment and selection. However......, organizations also strive to hire the best possible candidates and seek to improve effectiveness of their selection process and achieve better person–environment (PE) fit. The presented research reviews existing literature on PE fit and e-selection and puts forward a heuristic model of technology...

  12. Problems of reliability and economy work of thermal power plants water treatment based on baromembrane technologies

    Science.gov (United States)

    Chichirova, N. D.; Chichirov, A. A.; Saitov, S. R.

    2017-11-01

    The introduction of baromembrane water treatment technologies for water desalination at Russian thermal power plants was beganed more than 25 years ago. These technologies have demonstrated their definite advantage over the traditional technologies of additional water treatment for steam boilers. However, there are problems associated with the reliability and economy of their work. The first problem is a large volume of waste water (up to 60% of the initial water). The second problem a expensive and unique chemical reagents complex (biocides, antiscalants, washing compositions) is required for units stable and troublefree operation. Each manufacturer develops his own chemical composition for a certain membrane type. This leads to a significant increase in reagents cost, as well as creates dependence of the technology consumer on the certain supplier. The third problem is that the reliability of the baromembrane units depends directly on the water preliminary treatment. The popular pre-cleaning technology with coagulation of aluminum oxychloride proves to be unacceptable during seasonal changes in the quality of the source water at a number of stations. As a result, pollution, poisoning and lesion of the membrane structure or deterioration of their mechanical properties are observed. The report presents ways to solve these problems.

  13. Analysis of Pending Problems for a Technology Demand of Domestic Operational Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Dae Seo; Park, Won Seok; Wi, Myung Hwan; Ha, Jae Joo

    2008-01-15

    Eleven technology fields were chosen, which have a relation with the solution of the pending problems of domestic operational nuclear power plants to manage an efficient operation and safe regulation for domestic nuclear power plants. The progressive background, requirements, and performance on the pending problems, 34, of an operation and regulation for domestic nuclear power plants were analyzed with regard to a risk information application, severe accident, PSR of structural materials, underwater monitoring, operation inspection and a fire protection, an instrument aging, metal integrity and steam generator, human technology and a digital I and C, quality assurance, secondary system and a user reliance and mass communications. KAERI's role is to provide a solution to these pending problems of domestic nuclear power plants. KAERI's technology is to be applicable to the pending problems for domestic nuclear power plants to raise an operational efficiency and an application frequency of nuclear power plants. In the future, a technology treaty between KAERI and KHNP is to be established to solve the pending problems for domestic nuclear power plants. Operation rate of nuclear power plants will also be raised and contribute to the supply of national energy due to this technology treaty.

  14. Portfolio selection problem with liquidity constraints under non-extensive statistical mechanics

    International Nuclear Information System (INIS)

    Zhao, Pan; Xiao, Qingxian

    2016-01-01

    In this study, we consider the optimal portfolio selection problem with liquidity limits. A portfolio selection model is proposed in which the risky asset price is driven by the process based on non-extensive statistical mechanics instead of the classic Wiener process. Using dynamic programming and Lagrange multiplier methods, we obtain the optimal policy and value function. Moreover, the numerical results indicate that this model is considerably different from the model based on the classic Wiener process, the optimal strategy is affected by the non-extensive parameter q, the increase in the investment in the risky asset is faster at a larger parameter q and the increase in wealth is similar.

  15. Technology Use for Diabetes Problem Solving in Adolescents with Type 1 Diabetes: Relationship to Glycemic Control.

    Science.gov (United States)

    Kumah-Crystal, Yaa A; Hood, Korey K; Ho, Yu-Xian; Lybarger, Cindy K; O'Connor, Brendan H; Rothman, Russell L; Mulvaney, Shelagh A

    2015-07-01

    This study examines technology use for problem solving in diabetes and its relationship to hemoglobin A1C (A1C). A sample of 112 adolescents with type 1 diabetes completed measures assessing use of technologies for diabetes problem solving, including mobile applications, social technologies, and glucose software. Hierarchical regression was performed to identify the contribution of a new nine-item Technology Use for Problem Solving in Type 1 Diabetes (TUPS) scale to A1C, considering known clinical contributors to A1C. Mean age for the sample was 14.5 (SD 1.7) years, mean A1C was 8.9% (SD 1.8%), 50% were female, and diabetes duration was 5.5 (SD 3.5) years. Cronbach's α reliability for TUPS was 0.78. In regression analyses, variables significantly associated with A1C were the socioeconomic status (β = -0.26, P Problem Solving Questionnaire (β = -0.26, P = 0.01), and TUPS (β = 0.26, P = 0.01). Aside from the Diabetes Self-Care Inventory--Revised, each block added significantly to the model R(2). The final model R(2) was 0.22 for modeling A1C (P problem solving and higher A1C. Adolescents with poorer glycemic control may use technology in a reactive, as opposed to preventive, manner. Better understanding of the nature of technology use for self-management over time is needed to guide the development of technology-mediated problem solving tools for youth with type 1 diabetes.

  16. PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

    International Nuclear Information System (INIS)

    CONRAD EA

    2008-01-01

    This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel

  17. Application of mathematical methods of analysis in selection of competing information technologies

    Science.gov (United States)

    Semenov, V. L.; Kadyshev, E. N.; Zakharova, A. N.; Patianova, A. O.; Dulina, G. S.

    2018-05-01

    The article discusses the use of qualimetry methods using the apparatus of mathematical analysis in the formation of the integral index that allows one to select the best option among competing information technology. The authors propose the use of affine space in the evaluation and selection of competing information technologies.

  18. Unveiling Research Agendas: a study of the influences on research problem selection among academic researchers

    Energy Technology Data Exchange (ETDEWEB)

    Bianco, M.; Sutz, J.

    2016-07-01

    Research problem selection is central to the dynamics of scientific knowledge production. Research agendas result from the selection of research problems and the formulation of individual and/or collective academic strategies to address them. But, why researchers study what they study? This paper presents incipient research focused on the way different factors influence the construction of academic research agendas. It takes a researcher-oriented approach relying on opinions and perspectives of a wide range of researchers in all fields of knowledge. The empirical work is carried out in Uruguay, a country in the periphery of mainstream science, whose academic community struggles in search of a balance between the requirements of the world community of scholars and the demands from different national stakeholders. The methodology and research results from this study may be relevant to other countries, at different peripheries. Further, understanding the interplay of influences that shape research agendas is an important tool for policy analysis and planning everywhere. (Author)

  19. Mixed integer linear programming model for dynamic supplier selection problem considering discounts

    Directory of Open Access Journals (Sweden)

    Adi Wicaksono Purnawan

    2018-01-01

    Full Text Available Supplier selection is one of the most important elements in supply chain management. This function involves evaluation of many factors such as, material costs, transportation costs, quality, delays, supplier capacity, storage capacity and others. Each of these factors varies with time, therefore, supplier identified for one period is not necessarily be same for the next period to supply the same product. So, mixed integer linear programming (MILP was developed to overcome the dynamic supplier selection problem (DSSP. In this paper, a mixed integer linear programming model is built to solve the lot-sizing problem with multiple suppliers, multiple periods, multiple products and quantity discounts. The buyer has to make a decision for some products which will be supplied by some suppliers for some periods cosidering by discount. To validate the MILP model with randomly generated data. The model is solved by Lingo 16.

  20. Implications of using clean technologies to power selected ASEAN countries

    International Nuclear Information System (INIS)

    Das, Anjana; Ahlgren, Erik O.

    2010-01-01

    This paper focuses on energy system development of the three largest Association of South East Asian Nations (ASEAN) countries: Indonesia, Philippines and Vietnam. The energy infrastructures in these counties are in the process of rapid development and, therefore, technology choices are critical. Applying the energy system model MARKAL and scenario analysis, this paper examines and quantifies the role of clean and advanced energy technologies for efficient local resource exploitation and improving energy security and environmental conditions. The main focus is on the power sector and the paper also addresses the potential ASEAN markets for European energy technologies. The paper concludes that there is a large potential market for clean and advanced energy technologies in the studied countries. If adopted, these technologies will bring several benefits like reduction in primary energy requirement, reduced investments requirement in the power sector and other parts of the energy infrastructure, reduced import of primary energy, reduced CO 2 emissions and local pollution, reduced energy system costs and marginal cost of electricity supply. Finally, barriers for transfer and diffusion of advanced energy technologies are discussed.

  1. Behavior Problems in Relation to Sustained Selective Attention Skills of Moderately Preterm Children

    OpenAIRE

    Bul, Kim C. M.; van Baar, Anneloes L.

    2011-01-01

    Attention skills may form an important developmental mechanism. A mediation model was examined in which behavioral problems of moderately preterm and term children at school age are explained by attention performance. Parents and teachers completed behavioral assessments of 348 moderately preterm children and 182 term children at 8 years of age. Children were administered a test of sustained selective attention. Preterm birth was associated with more behavioral and attention difficulties. Ges...

  2. A behavioural approach to financial portfolio selection problem: an empirical study using heuristics

    OpenAIRE

    Grishina, Nina

    2014-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University The behaviourally based portfolio selection problem with investor's loss aversion and risk aversion biases in portfolio choice under uncertainty are studied. The main results of this work are developed heuristic approaches for the prospect theory and cumulative prospect theory models proposed by Kahneman and Tversky in 1979 and 1992 as well as an empirical comparative analysis of these models ...

  3. The Problem of Neutralization of Reactionary Masses in the Russian Technologies of CWD

    International Nuclear Information System (INIS)

    Petrov, V.

    2007-01-01

    11, 2006 at Conference of OPCW terms of destruction of the chemical weapon for Russia and USA were prolonged to 5 years, till April, 29, 2012. At all intentions to achieve these terms in the Russian technologies are available a number of technical problems which can complicate works on the CWD. One of them concerns the problems connected to neutralization of reactionary masses of the CWD. In the Russian Federation it is not constructed yet any enterprise for destruction with a full cycle. The question of neutralization of reactionary masses yet does not find the full decision. In this connection there is a threat of that the problem of reactionary masses can appear outside of works on destruction is direct of CW and beyond the framework of 2012. The technical analysis of possible technologies and directions of neutralization of reactionary masses of destruction of lewisite and POS in the Russian technologies of the CWD is carried out. (author)

  4. The Problem of Neutralization of Reactionary Masses in the Russian Technologies of CWD

    Energy Technology Data Exchange (ETDEWEB)

    Petrov, V [Institute of Applied Mechanics UrB of the Russian Academy of Science, Izhevsk (Russian Federation)

    2007-07-01

    11, 2006 at Conference of OPCW terms of destruction of the chemical weapon for Russia and USA were prolonged to 5 years, till April, 29, 2012. At all intentions to achieve these terms in the Russian technologies are available a number of technical problems which can complicate works on the CWD. One of them concerns the problems connected to neutralization of reactionary masses of the CWD. In the Russian Federation it is not constructed yet any enterprise for destruction with a full cycle. The question of neutralization of reactionary masses yet does not find the full decision. In this connection there is a threat of that the problem of reactionary masses can appear outside of works on destruction is direct of CW and beyond the framework of 2012. The technical analysis of possible technologies and directions of neutralization of reactionary masses of destruction of lewisite and POS in the Russian technologies of the CWD is carried out. (author)

  5. Use of reproductive technology for sex selection for nonmedical reasons.

    Science.gov (United States)

    2015-06-01

    Because these practices are ethically controversial, clinics are encouraged to develop and make available their policies on the provision of nonmedical sex selection, and to accommodate their employees' decisions about whether or not to participate in such treatment. Practitioners offering assisted reproductive services are under no ethical obligation to provide or refuse to provide nonmedically indicated methods of sex selection. This document replaces two documents previously published by the ASRM Ethics Committee, titled, "Sex selection and preimplantation genetic diagnosis" (Fertil Steril 2004;82:S245-8) and "Preconception gender selection for nonmedical reasons" (Fertil Steril 2004;82:S232-5). Copyright © 2015 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  6. An efficient heuristic method for dynamic portfolio selection problem under transaction costs and uncertain conditions

    Science.gov (United States)

    Najafi, Amir Abbas; Pourahmadi, Zahra

    2016-04-01

    Selecting the optimal combination of assets in a portfolio is one of the most important decisions in investment management. As investment is a long term concept, looking into a portfolio optimization problem just in a single period may cause loss of some opportunities that could be exploited in a long term view. Hence, it is tried to extend the problem from single to multi-period model. We include trading costs and uncertain conditions to this model which made it more realistic and complex. Hence, we propose an efficient heuristic method to tackle this problem. The efficiency of the method is examined and compared with the results of the rolling single-period optimization and the buy and hold method which shows the superiority of the proposed method.

  7. GRASP with path-relinking for the selective pickup and delivery problem

    DEFF Research Database (Denmark)

    Ho, Sin C.; Szeto, W. Y.

    2016-01-01

    Bike sharing systems are very popular nowadays. One of the characteristics is that bikes are picked up from some surplus bike stations and transported to all deficit bike stations by a repositioning vehicle with limited capacity to satisfy the demand of deficit bike stations. Motivated by this real...... world bicycle repositioning problem, we study the selective pickup and delivery problem, where demand at every delivery node has to be satisfied by the supply collected from a subset of pickup nodes. The objective is to minimize the total travel cost incurred from visiting the nodes. We present a GRASP...... with path-relinking for solving the described problem. Experimental results show that this simple heuristic improves the existing results in the literature with an average improvement of 5.72% using small computing times. The proposed heuristic can contribute to the development of effective and efficient...

  8. Some problems in mechanics of growing solids with applications to AM technologies

    Science.gov (United States)

    Manzhirov, A. V.

    2018-04-01

    Additive Manufacturing (AM) technologies are an exciting area of the modern industrial revolution and have applications in engineering, medicine, electronics, aerospace industry, etc. AM enables cost-effective production of customized geometry and parts by direct fabrication from 3D data and mathematical models. Despite much progress in AM technologies, problems of mechanical analysis for AM fabricated parts yet remain to be solved. This paper deals with three main mechanical problems: the onset of residual stresses, which occur in the AM process and can lead to failure of the parts, the distortion of the final shape of AM fabricated parts, and the development of technological solutions aimed at improving existing AM technologies and creating new ones. An approach proposed deals with the construction of adequate analytical model and effective methods for the simulation of AM processes for fabricated solid parts.

  9. Hybrid nested sampling algorithm for Bayesian model selection applied to inverse subsurface flow problems

    International Nuclear Information System (INIS)

    Elsheikh, Ahmed H.; Wheeler, Mary F.; Hoteit, Ibrahim

    2014-01-01

    A Hybrid Nested Sampling (HNS) algorithm is proposed for efficient Bayesian model calibration and prior model selection. The proposed algorithm combines, Nested Sampling (NS) algorithm, Hybrid Monte Carlo (HMC) sampling and gradient estimation using Stochastic Ensemble Method (SEM). NS is an efficient sampling algorithm that can be used for Bayesian calibration and estimating the Bayesian evidence for prior model selection. Nested sampling has the advantage of computational feasibility. Within the nested sampling algorithm, a constrained sampling step is performed. For this step, we utilize HMC to reduce the correlation between successive sampled states. HMC relies on the gradient of the logarithm of the posterior distribution, which we estimate using a stochastic ensemble method based on an ensemble of directional derivatives. SEM only requires forward model runs and the simulator is then used as a black box and no adjoint code is needed. The developed HNS algorithm is successfully applied for Bayesian calibration and prior model selection of several nonlinear subsurface flow problems

  10. Hybrid nested sampling algorithm for Bayesian model selection applied to inverse subsurface flow problems

    Energy Technology Data Exchange (ETDEWEB)

    Elsheikh, Ahmed H., E-mail: aelsheikh@ices.utexas.edu [Institute for Computational Engineering and Sciences (ICES), University of Texas at Austin, TX (United States); Institute of Petroleum Engineering, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom); Wheeler, Mary F. [Institute for Computational Engineering and Sciences (ICES), University of Texas at Austin, TX (United States); Hoteit, Ibrahim [Department of Earth Sciences and Engineering, King Abdullah University of Science and Technology (KAUST), Thuwal (Saudi Arabia)

    2014-02-01

    A Hybrid Nested Sampling (HNS) algorithm is proposed for efficient Bayesian model calibration and prior model selection. The proposed algorithm combines, Nested Sampling (NS) algorithm, Hybrid Monte Carlo (HMC) sampling and gradient estimation using Stochastic Ensemble Method (SEM). NS is an efficient sampling algorithm that can be used for Bayesian calibration and estimating the Bayesian evidence for prior model selection. Nested sampling has the advantage of computational feasibility. Within the nested sampling algorithm, a constrained sampling step is performed. For this step, we utilize HMC to reduce the correlation between successive sampled states. HMC relies on the gradient of the logarithm of the posterior distribution, which we estimate using a stochastic ensemble method based on an ensemble of directional derivatives. SEM only requires forward model runs and the simulator is then used as a black box and no adjoint code is needed. The developed HNS algorithm is successfully applied for Bayesian calibration and prior model selection of several nonlinear subsurface flow problems.

  11. Telemetry Measurement of Selected Biological Signal Using Bluetooth Technology

    Directory of Open Access Journals (Sweden)

    Martin Cerny

    2005-01-01

    Full Text Available This work treats of using the Bluetooth technology in biomedical engineering. The Bluetooth is used for transmission of measured data from pulse oximeter, ECG and monitor of blood pressure. OEM modules realize the devices for pulse oximetry and ECG. Both these realized devices can communicate with computer by Bluetooth technology and standard serial link too. The realized system of measuring devices is very flexible and mobile, because the Bluetooth technology is used and accumulators can supply the realized devices. It is possible to measure other physical values converted to voltage, because the used OEM module for pulse oximetry include A/D converter. The part of this work is software visualisation of measured values to.

  12. Incorporating technology-based learning tools into teaching and learning of optimization problems

    Science.gov (United States)

    Yang, Irene

    2014-07-01

    The traditional approach of teaching optimization problems in calculus emphasizes more on teaching the students using analytical approach through a series of procedural steps. However, optimization normally involves problem solving in real life problems and most students fail to translate the problems into mathematic models and have difficulties to visualize the concept underlying. As an educator, it is essential to embed technology in suitable content areas to engage students in construction of meaningful learning by creating a technology-based learning environment. This paper presents the applications of technology-based learning tool in designing optimization learning activities with illustrative examples, as well as to address the challenges in the implementation of using technology in teaching and learning optimization. The suggestion activities in this paper allow flexibility for educator to modify their teaching strategy and apply technology to accommodate different level of studies for the topic of optimization. Hence, this provides great potential for a wide range of learners to enhance their understanding of the concept of optimization.

  13. Selected reading on introduction to pressure tube technology

    International Nuclear Information System (INIS)

    Causey, A.R.; Coleman, C.E.; Ells, C.E.

    1981-10-01

    Four lectures on pressure tube technology were presented at Sheridan Park, Ontario, on 1981 June 1. The titles were 'Pressure Tubes and Their Operational Environment', 'Fabrication, Inspection and Properties of Current Production Pressure Tubes', 'In-Reactor Deformation of Fuel Channels', and 'Potential Failure Modes in Pressure Tubes'. This report lists the references used in preparing the lectures. It is intended to provide a starting point in reading for people who need to become familiar with pressure tube technology but have little prior knowledge of the topic

  14. Actual problems of physics and technology. III International youth scientific school-conference. Book of abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    The third International youth scientific school-conference took place 10-13 April 2014 year in Moscow on the basis National Research Nuclear University MEPhI and RAS Lebedev P.N. Physical Institute. The actual scientific problems of current fundamental and applied physics as well as nuclear and physical technologies were discussed. This book of abstracts contains many interesting items devoted problems of theoretical physics and astrophysics, nuclear physics, nanotecnology, laser physics and plasma physics [ru

  15. Can Pollution Problems Be Effectively Solved by Environmental Science and Technology? An Analysis of Critical Limitations

    Energy Technology Data Exchange (ETDEWEB)

    Huesemann, Michael H.(BATTELLE (PACIFIC NW LAB))

    2000-12-01

    It is currently believed that science and technology can provide effective solutions to most, if not all, environmental problems facing western industrial societies. The validity of this optimistic assumption is highly questionable for at least three reasons: First, current mechanistic, reductionist science is inherently incapable of providing the complete and accurate information which is required to successfully address environmental problems. Second, both the conservation of mass principle and the second law of thermodynamics dictate that most remediation technologies - while successful in solving specific pollution problems - cause unavoidable negative environmental impacts elsewhere or in the future. Third, it is intrinsically impossible to design industrial processes that have no negative environmental impacts. This follows not only from the entropy law but also from the fact that any generation of energy is impossible without negative environmental consequences. It can therefore be concluded that science and technology have only very limited potential in solving current and future environmental problems. Consequently, it will be necessary to address the root cause of environmental deterioration, namely the prevailing materialistic values that are the main driving force for both overpopulation and overconsumption. The long-term protection of the environment is therefore not primarily a technical problem but rather a social and moral problem that can only be solved by drastically reducing the strong influence of materialistic values.

  16. PECVD silicon carbide surface micromachining technology and selected MEMS applications

    NARCIS (Netherlands)

    Rajaraman, V.; Pakula, L.S.; Yang, H.; French, P.J.; Sarro, P.M.

    2011-01-01

    Attractive material properties of plasma enhanced chemical vapour deposited (PECVD) silicon carbide (SiC) when combined with CMOS-compatible low thermal budget processing provides an ideal technology platform for developing various microelectromechanical systems (MEMS) devices and merging them with

  17. Selection Processes and Appropriability in Art, Science and Technology

    NARCIS (Netherlands)

    Wijnberg, N.M.

    1995-01-01

    Recently, there has been a mutually beneficial interchange of models and ideas between the sociology of science and the economics of technological innovation. Concepts such as the "paradigm" and the "network" seem to lend themselves to useful application in both fields. To these is added the concept

  18. Use of information technology by academics in selected universities ...

    African Journals Online (AJOL)

    There was negligible use of networking and Internet. Major obstacles to effective use of information technology include lack of access to IT, inadequate skills in use of computers, and incessant power supply. The study concludes that, use of IT is a recent development in these universities, and recommends provision of ...

  19. Injection moulding and selective metallisation technologies for polymer Microsystems

    DEFF Research Database (Denmark)

    Tenchine, L.; Gout, S.; Dessors, S.

    2016-01-01

    The present paper describes how developing and optimizing high-throughput integrated technologies for theproduction of miniaturised multi-material and multi-functional components at industrial scale. Based on 2 industrialdemonstrators (a band diplexer and a micro aeraulic device), the paper shows...

  20. Innovative Technologies for the Solution of Environmental Problems in the World Community

    Directory of Open Access Journals (Sweden)

    T. K. Usmanova

    2017-01-01

    Full Text Available Purpose: the purpose of the article is the disclosure of environmental problems and prospects commercialization of intellectual property within development of innovative information technologies in the conditions of integration of economies into the world economy, identification of opportunities of forming, organization, financing, management, ownership, commercialization and protection of innovative technologies and intellectual property. Relevance of the chosen subject is caused by the current state of ecology and problems of commercialization of intellectual property in development of innovative information technologies within the conditions of integration of economies into the world economy. The existing changes of the current legislation and tendencies of development of the industry of innovative information technologies in field of ecology in the Russian Federation require cardinal review because of its low competitiveness. Ensuring sustainable development of the country directly depends on implementation of innovative information technologies, not only within the sphere of ecology, but also in all industries of the national economy of Russia. Especially important direction of development of innovations is the field of information technologies with its further implementation in innovative productions and provision of services with a focus on protection of ecology and healthcare. Methods: the methodology of the solution of objectives is based on usage of a method of dialectic research, methods of the economic analysis, forecasting, the situational and systemic analysis, expert evaluations and the analysis of empirical data. Results: in the process of researching the direction of solving environmental problems, the author studied foreign and Russian programs based on innovative technologies in this field and identified current proposals regarding the practical implementation of partnerships in the form of Public Private Partnerships PPPs

  1. Selected psychiatric problems among college students in two Arab countries: comparison with the USA.

    Science.gov (United States)

    Kronfol, Ziad; Khalifa, Batoul; Khoury, Brigitte; Omar, Omar; Daouk, Sariah; deWitt, J P; ElAzab, Nourehan; Eisenberg, Daniel

    2018-05-24

    Psychiatric problems among college students on USA campuses are common. Little is known about similar problems in developing countries, particularly the Arab region. The goal of this study was to assess the frequency of selected psychiatric problems among college students in two Arab countries: Qatar and Lebanon, and to compare them to the USA. The Healthy Minds Study, an online confidential survey of common psychiatric symptoms designed for college campuses was used. We used the Patient Health Questionnaire-9 (PHQ-9) to screen for major depression, the Generalized Anxiety Disorder-7 (GAD-7) to screen for generalized anxiety and the SCOFF questionnaire to screen for eating disorders. Comparisons were made using ANOVA, Chi-Square tests and logistic regressions. A total of 1841 students participated in the study. The rates of depression (PHQ-9 ≥ 12), generalized anxiety (GAD-7 ≥ 10) and eating disorders (SCOFF≥3) at the combined Arab universities were 34.6, 36.1 and 20.4% respectively. The corresponding rates in the USA were: 12.8, 15.9 and 6.8% (p problems on functioning in general and academic performance in particular was more severe in the Arab countries compared to the USA (p problems in general included location, female gender, financial difficulties and poor grades. Being religious had a protective association with mental health. The rates of depression, anxiety and eating disorders were significantly higher among college students in Qatar and Lebanon compared to the USA. Additional research is needed to determine whether these results reflect methodological limitations or true differences in psychopathology across these populations. If replicated, the results indicate that the psychiatric problems on college campuses in the USA are a microcosm of a global problem that needs global solutions.

  2. practical common weight maximin approach for technology selection

    African Journals Online (AJOL)

    2014-06-30

    Jun 30, 2014 ... proposes a multi-objective decision tool for industrial robot selection, which does not require subjective assessments ... Over the past several decades, manufacturers who have been faced with intense competition ... three groups: economic analysis techniques, analytical methods and strategic approaches.

  3. Using Web 2.0 Technology to Enhance, Scaffold and Assess Problem-Based Learning

    Directory of Open Access Journals (Sweden)

    Catherine Hack

    2013-08-01

    Full Text Available Web 2.0 technologies, such as social networks, wikis, blogs, and virtual worlds provide a platform for collaborative working, facilitating sharing of resources and joint document production. They can act as a stimulus to promote active learning and provide an engaging and interactive environment for students, and as such align with the philosophy of Problem-based Learning. Furthermore, Web 2.0 technologies can provide the tutor or facilitator with an opportunity to scaffold and asses the PBL process. However, whilst it is recognised that technology has an important role in enhancing each step of a PBL exercise, academic staff can be reluctant to use it. This paper provides some illustrative examples of the technologies that have been used to enhance, scaffold and assess PBL and their evaluation by distance learning and on-campus students at the University of Ulster. The benefits and limitations of using technology for both staff and students to support PBL are discussed.

  4. Food Selectivity, Mealtime Behavior Problems, Spousal Stress, and Family Food Choices in Children with and without Autism Spectrum Disorder

    Science.gov (United States)

    Curtin, C.; Hubbard, K.; Anderson, S. E.; Mick, E.; Must, A.; Bandini, L. G.

    2015-01-01

    Mealtime behavior problems and family stress occur frequently among families of children with autism spectrum disorder (ASD). However, it is unknown whether food selectivity is an associated factor. The associations of high food selectivity with mealtime behavior problems, spousal stress, and influence on family members were assessed among 53…

  5. A hybrid agent-based computational economics and optimization approach for supplier selection problem

    Directory of Open Access Journals (Sweden)

    Zahra Pourabdollahi

    2017-12-01

    Full Text Available Supplier evaluation and selection problem is among the most important of logistics decisions that have been addressed extensively in supply chain management. The same logistics decision is also important in freight transportation since it identifies trade relationships between business establishments and determines commodity flows between production and consumption points. The commodity flows are then used as input to freight transportation models to determine cargo movements and their characteristics including mode choice and shipment size. Various approaches have been proposed to explore this latter problem in previous studies. Traditionally, potential suppliers are evaluated and selected using only price/cost as the influential criteria and the state-of-practice methods. This paper introduces a hybrid agent-based computational economics and optimization approach for supplier selection. The proposed model combines an agent-based multi-criteria supplier evaluation approach with a multi-objective optimization model to capture both behavioral and economical aspects of the supplier selection process. The model uses a system of ordered response models to determine importance weights of the different criteria in supplier evaluation from a buyers’ point of view. The estimated weights are then used to calculate a utility for each potential supplier in the market and rank them. The calculated utilities are then entered into a mathematical programming model in which best suppliers are selected by maximizing the total accrued utility for all buyers and minimizing total shipping costs while balancing the capacity of potential suppliers to ensure market clearing mechanisms. The proposed model, herein, was implemented under an operational agent-based supply chain and freight transportation framework for the Chicago Metropolitan Area.

  6. Selected Test Results from the Encell Technology Nickel Iron Battery

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Summer Kamal Rhodes [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Advanced Power Sources R& D; Baca, Wes Edmund [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Advanced Power Sources R& D; Avedikian, Kristan [Encell Technology, Alachua, FL (United States)

    2014-09-01

    The performance of the Encell Nickel Iron (NiFe) battery was measured. Tests included capacity, capacity as a function of rate, capacity as a function of temperature, charge retention (28-day), efficiency, accelerated life projection, and water refill evaluation. The goal of this work was to evaluate the general performance of the Encell NiFe battery technology for stationary applications and demonstrate the chemistry's capabilities in extreme conditions. Test results have indicated that the Encell NiFe battery technology can provide power levels up to the 6C discharge rate, ampere-hour efficiency above 70%. In summary, the Encell batteries have met performance metrics established by the manufacturer. Long-term cycle tests are not included in this report. A cycle test at elevated temperature was run, funded by the manufacturer, which Encell uses to predict long-term cycling performance, and which passed their prescribed metrics.

  7. Solving portfolio selection problems with minimum transaction lots based on conditional-value-at-risk

    Science.gov (United States)

    Setiawan, E. P.; Rosadi, D.

    2017-01-01

    Portfolio selection problems conventionally means ‘minimizing the risk, given the certain level of returns’ from some financial assets. This problem is frequently solved with quadratic or linear programming methods, depending on the risk measure that used in the objective function. However, the solutions obtained by these method are in real numbers, which may give some problem in real application because each asset usually has its minimum transaction lots. In the classical approach considering minimum transaction lots were developed based on linear Mean Absolute Deviation (MAD), variance (like Markowitz’s model), and semi-variance as risk measure. In this paper we investigated the portfolio selection methods with minimum transaction lots with conditional value at risk (CVaR) as risk measure. The mean-CVaR methodology only involves the part of the tail of the distribution that contributed to high losses. This approach looks better when we work with non-symmetric return probability distribution. Solution of this method can be found with Genetic Algorithm (GA) methods. We provide real examples using stocks from Indonesia stocks market.

  8. Constructing abortion as a social problem: "Sex selection" and the British abortion debate.

    Science.gov (United States)

    Lee, Ellie

    2017-02-01

    Between February 2012 and March 2015, the claim that sex selection abortion was taking place in Britain and that action needed to be taken to stop it dominated debate in Britain about abortion. Situating an analysis in sociological and social psychological approaches to the construction of social problems, particularly those considering "feminised" re-framings of anti-abortion arguments, this paper presents an account of this debate. Based on analysis of media coverage, Parliamentary debate and official documents, we focus on claims about grounds (evidence) made to sustain the case that sex selection abortion is a British social problem and highlight how abortion was problematised in new ways. Perhaps most notable, we argue, was the level of largely unchallenged vilification of abortion doctors and providers, on the grounds that they are both law violators and participants in acts of discrimination and violence against women, especially those of Asian heritage. We draw attention to the role of claims made by feminists in the media and in Parliament about "gendercide" as part of this process and argue that those supportive of access to abortion need to critically assess both this aspect of the events and also consider arguments about the problems of "medical power" in the light of what took place.

  9. Selecting e-Purse Smart Card Technology via Fuzzy AHP and ANP

    Directory of Open Access Journals (Sweden)

    Nurgül Demirtaş

    2014-01-01

    Full Text Available Developments in the information technologies provide important advantages to consumers and companies. Nowadays, smart card technology starts to use e-purse applications. The aim of this paper is to identify the most important decision criteria to select the best card technology. In this study, at first smart card and multiple selection techniques were explained. Then the best card technology was selected for an e-purse application. The three types of card technologies were examined and the most important criteria were taken into account by the software developer while they develop card software. Fuzzy analytic hierarchy process (FAHP and analytical network process (ANP techniques were used to compare smart card technologies.

  10. Students’ Views about the Problem Based Collaborative Learning Environment Supported By Dynamic Web Technologies

    Directory of Open Access Journals (Sweden)

    Erhan ÜNAL

    2017-04-01

    Full Text Available The purpose of this study is to design a problem based collaborative learning environment supported by dynamic web technologies and examine students’ views about this learning environment. The study was designed as a qualitative research. 36 students who took Object Oriented Programming I-II course from a public university at the department of computer programming participated in the study. During the research process, the Object Oriented Programming I-II course was designed with incorporating different dynamic web technologies (Edmodo, Google Services, and Mind42 and Nelson (1999’s collaborative problem solving method. At the end of the course, there were focus group interviews in regards to the students’ views on a learning environment supported by dynamic web technologies and collaborative problem solving method. At the end of the focus group interviews, 4 themes were obtained from the students’ views, including positive aspects of the learning environment, difficulties faced in the learning environment, advantages of the learning environment, and skills gained as a result of the project. The results suggest that problem based collaborative learning methods and dynamic web technologies can be used in learning environments in community colleges.

  11. Problems of technology and corrosion in sodium coolant and cover gas

    International Nuclear Information System (INIS)

    Kuenstler, K.; Ullmann, H.

    1977-07-01

    The meeting encloses the following themes: (i) Reactions in the system sodium-steel-cover gas (ii) Corrosion behaviour of structural and cladding materials (iii) Determination of impurities in sodium and cover gas (iv) Technology of sodium and cover gas (v) Testing equipments (vi) Safety problems

  12. Students' Views about the Problem Based Collaborative Learning Environment Supported by Dynamic Web Technologies

    Science.gov (United States)

    Ünal, Erhan; Çakir, Hasan

    2017-01-01

    The purpose of this study was to design a problem based collaborative learning environment supported by dynamic web technologies and to examine students' views about this learning environment. The study was designed as a qualitative research. Some 36 students who took an Object Oriented Programming I-II course at the department of computer…

  13. Teaching Mathematical Problem Solving to Middle School Students in Math, Technology Education, and Special Education Classrooms

    Science.gov (United States)

    Bottge, Brian A.; Heinrichs, Mary; Mehta, Zara Dee; Rueda, Enrique; Hung, Ya-Hui; Danneker, Jeanne

    2004-01-01

    This study compared two approaches for teaching sixth-grade middle school students to solve math problems in math, technology education, and special education classrooms. A total of 17 students with disabilities and 76 students without disabilities were taught using either enhanced anchored instruction (EAI) or text-based instruction coupled with…

  14. VET Workers' Problem-Solving Skills in Technology-Rich Environments: European Approach

    Science.gov (United States)

    Hämäläinen, Raija; Cincinnato, Sebastiano; Malin, Antero; De Wever, Bram

    2014-01-01

    The European workplace is challenging VET adults' problem-solving skills in technology-rich environments (TREs). So far, no international large-scale assessment data has been available for VET. The PIAAC data comprise the most comprehensive source of information on adults' skills to date. The present study (N = 50 369) focuses on gaining insight…

  15. Using Text Mining to Uncover Students' Technology-Related Problems in Live Video Streaming

    Science.gov (United States)

    Abdous, M'hammed; He, Wu

    2011-01-01

    Because of their capacity to sift through large amounts of data, text mining and data mining are enabling higher education institutions to reveal valuable patterns in students' learning behaviours without having to resort to traditional survey methods. In an effort to uncover live video streaming (LVS) students' technology related-problems and to…

  16. Problem Solving and the Use of Digital Technologies within the Mathematical Working Space Framework

    Science.gov (United States)

    Santos-Trigo, Manuel; Moreno-Armella, Luis; Camacho-Machín, Matías

    2016-01-01

    The aim of this study is to analyze and document the extent to which high school teachers rely on a set of technology affordances to articulate epistemological and cognitive actions in problem solving approaches. Participants were encouraged to construct dynamic representations of tasks and always to look for different ways to identify and support…

  17. Managerial Problems in the Use of Educational Technology in Primary Education Schools

    Science.gov (United States)

    Hosgorur, Vural

    2013-01-01

    Rapid progress in science and technology also changes understanding, wishes and expectations, processes, operations and organisational structures. Such developments positively affect the structure of educational systems as well as learning-teaching activities in instructional environments. The problem of this research is to define managerial…

  18. The Systemic Approach to Technological Education: Effects of Transferred Learning in Resolving a Physics Problem

    Science.gov (United States)

    Andreucci, Colette; Chatoney, Marjolaine; Ginestie, Jacques

    2012-01-01

    The purpose of this study is to verify whether pupils (15-16 years old) who have received technology education on a systemic approach of industrial systems, are better than other pupils (of the same age but from other academic domains such as literary ones or ones that are economics-based) at solving physical science problems which involve…

  19. Smartphone technologies and Bayesian networks to assess shorebird habitat selection

    Science.gov (United States)

    Zeigler, Sara; Thieler, E. Robert; Gutierrez, Ben; Plant, Nathaniel G.; Hines, Megan K.; Fraser, James D.; Catlin, Daniel H.; Karpanty, Sarah M.

    2017-01-01

    Understanding patterns of habitat selection across a species’ geographic distribution can be critical for adequately managing populations and planning for habitat loss and related threats. However, studies of habitat selection can be time consuming and expensive over broad spatial scales, and a lack of standardized monitoring targets or methods can impede the generalization of site-based studies. Our objective was to collaborate with natural resource managers to define available nesting habitat for piping plovers (Charadrius melodus) throughout their U.S. Atlantic coast distribution from Maine to North Carolina, with a goal of providing science that could inform habitat management in response to sea-level rise. We characterized a data collection and analysis approach as being effective if it provided low-cost collection of standardized habitat-selection data across the species’ breeding range within 1–2 nesting seasons and accurate nesting location predictions. In the method developed, >30 managers and conservation practitioners from government agencies and private organizations used a smartphone application, “iPlover,” to collect data on landcover characteristics at piping plover nest locations and random points on 83 beaches and barrier islands in 2014 and 2015. We analyzed these data with a Bayesian network that predicted the probability a specific combination of landcover variables would be associated with a nesting site. Although we focused on a shorebird, our approach can be modified for other taxa. Results showed that the Bayesian network performed well in predicting habitat availability and confirmed predicted habitat preferences across the Atlantic coast breeding range of the piping plover. We used the Bayesian network to map areas with a high probability of containing nesting habitat on the Rockaway Peninsula in New York, USA, as an example application. Our approach facilitated the collation of evidence-based information on habitat selection

  20. Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents

    OpenAIRE

    Misje, René

    2013-01-01

    Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents. This qualitative study explores the usefulness of music technology in music therapeutic practice with youth and adolescents. Four music therapist`s reflections on their use of music technologies and on the possibilities, potential and problems of this use are explored through semi-structured intervi...

  1. Application of interval 2-tuple linguistic MULTIMOORA method for health-care waste treatment technology evaluation and selection.

    Science.gov (United States)

    Liu, Hu-Chen; You, Jian-Xin; Lu, Chao; Shan, Meng-Meng

    2014-11-01

    The management of health-care waste (HCW) is a major challenge for municipalities, particularly in the cities of developing countries. Selection of the best treatment technology for HCW can be viewed as a complicated multi-criteria decision making (MCDM) problem which requires consideration of a number of alternatives and conflicting evaluation criteria. Additionally, decision makers often use different linguistic term sets to express their assessments because of their different backgrounds and preferences, some of which may be imprecise, uncertain and incomplete. In response, this paper proposes a modified MULTIMOORA method based on interval 2-tuple linguistic variables (named ITL-MULTIMOORA) for evaluating and selecting HCW treatment technologies. In particular, both subjective and objective importance coefficients of criteria are taken into consideration in the developed approach in order to conduct a more effective analysis. Finally, an empirical case study in Shanghai, the most crowded metropolis of China, is presented to demonstrate the proposed method, and results show that the proposed ITL-MULTIMOORA can solve the HCW treatment technology selection problem effectively under uncertain and incomplete information environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Performance-Based Technology Selection Filter description report. INEL Buried Waste Integrated Demonstration System Analysis project

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

  3. Technology of solving multi-objective problems of control of systems with distributed parameters

    Science.gov (United States)

    Rapoport, E. Ya.; Pleshivtseva, Yu. E.

    2017-07-01

    A constructive technology of multi-objective optimization of control of distributed parameter plants is proposed. The technology is based on a single-criterion version in the form of the minimax convolution of normalized performance criteria. The approach under development is based on the transition to an equivalent form of the variational problem with constraints, with the problem solution being a priori Pareto-effective. Further procedures of preliminary parameterization of control actions and subsequent reduction to a special problem of semi-infinite programming make it possible to find the sought extremals with the use of their Chebyshev properties and fundamental laws of the subject domain. An example of multi-objective optimization of operation modes of an engineering thermophysics object is presented, which is of independent interest.

  4. A Genetic Algorithm for Selection of Fixed-Size Subsets with Application to Design Problems

    Directory of Open Access Journals (Sweden)

    Mark A. Wolters

    2015-11-01

    Full Text Available The R function kofnGA conducts a genetic algorithm search for the best subset of k items from a set of n alternatives, given an objective function that measures the quality of a subset. The function fills a gap in the presently available subset selection software, which typically searches over a range of subset sizes, restricts the types of objective functions considered, or does not include freely available code. The new function is demonstrated on two types of problem where a fixed-size subset search is desirable: design of environmental monitoring networks, and D-optimal design of experiments. Additionally, the performance is evaluated on a class of constructed test problems with a novel design that is interesting in its own right.

  5. Therapists' causal attributions of clients' problems and selection of intervention strategies.

    Science.gov (United States)

    Royce, W S; Muehlke, C V

    1991-04-01

    Therapists' choices of intervention strategies are influenced by many factors, including judgments about the bases of clients' problems. To assess the relationships between such causal attributions and the selection of intervention strategies, 196 counselors, psychologists, and social workers responded to the written transcript of a client's interview by answering two questionnaires, a 1982 scale (Causal Dimension Scale by Russell) which measured causal attribution of the client's problem, and another which measured preference for emotional, rational, and active intervention strategies in dealing with the client, based on the 1979 E-R-A taxonomy of Frey and Raming. A significant relationship was found between the two sets of variables, with internal attributions linked to rational intervention strategies and stable attributions linked to active strategies. The results support Halleck's 1978 hypothesis that theories of psychotherapy tie interventions to etiological considerations.

  6. Time-Consistent Strategies for a Multiperiod Mean-Variance Portfolio Selection Problem

    Directory of Open Access Journals (Sweden)

    Huiling Wu

    2013-01-01

    Full Text Available It remained prevalent in the past years to obtain the precommitment strategies for Markowitz's mean-variance portfolio optimization problems, but not much is known about their time-consistent strategies. This paper takes a step to investigate the time-consistent Nash equilibrium strategies for a multiperiod mean-variance portfolio selection problem. Under the assumption that the risk aversion is, respectively, a constant and a function of current wealth level, we obtain the explicit expressions for the time-consistent Nash equilibrium strategy and the equilibrium value function. Many interesting properties of the time-consistent results are identified through numerical sensitivity analysis and by comparing them with the classical pre-commitment solutions.

  7. Parental adjustment, parenting attitudes and emotional and behavioral problems in children with selective mutism.

    Science.gov (United States)

    Alyanak, Behiye; Kılınçaslan, Ayşe; Harmancı, Halime Sözen; Demirkaya, Sevcan Karakoç; Yurtbay, Tülin; Vehid, Hayriye Ertem

    2013-01-01

    The present study investigated emotional and behavioral problems in children with selective mutism (SM) along with the psychological adjustment and parenting attitudes of their mothers and fathers. Participants included 26 children with SM (mean age = 8.11 ± 2.11 years), 32 healthy controls (mean age = 8.18 ± 2.55 years) and the parents of all children. Children with SM displayed higher problem scores than controls in a variety of emotional and behavioral parameters. They predominantly displayed internalizing problems, whereas aggressive and delinquent behavior was described among a subsample of the children. Significant differences existed between the SM and control groups only in paternal psychopathology, which included anxiety and depression. They did not differ with respect to maternal psychological distress or mother or father reported parental attitudes. Another important result of the present study was that the severity of emotional and behavioral problems of children with SM was correlated with maternal psychopathology but not paternal psychopathology. Copyright © 2012 Elsevier Ltd. All rights reserved.

  8. Risk-aware multi-armed bandit problem with application to portfolio selection.

    Science.gov (United States)

    Huo, Xiaoguang; Fu, Feng

    2017-11-01

    Sequential portfolio selection has attracted increasing interest in the machine learning and quantitative finance communities in recent years. As a mathematical framework for reinforcement learning policies, the stochastic multi-armed bandit problem addresses the primary difficulty in sequential decision-making under uncertainty, namely the exploration versus exploitation dilemma, and therefore provides a natural connection to portfolio selection. In this paper, we incorporate risk awareness into the classic multi-armed bandit setting and introduce an algorithm to construct portfolio. Through filtering assets based on the topological structure of the financial market and combining the optimal multi-armed bandit policy with the minimization of a coherent risk measure, we achieve a balance between risk and return.

  9. On the Computation of the Efficient Frontier of the Portfolio Selection Problem

    Directory of Open Access Journals (Sweden)

    Clara Calvo

    2012-01-01

    Full Text Available An easy-to-use procedure is presented for improving the ε-constraint method for computing the efficient frontier of the portfolio selection problem endowed with additional cardinality and semicontinuous variable constraints. The proposed method provides not only a numerical plotting of the frontier but also an analytical description of it, including the explicit equations of the arcs of parabola it comprises and the change points between them. This information is useful for performing a sensitivity analysis as well as for providing additional criteria to the investor in order to select an efficient portfolio. Computational results are provided to test the efficiency of the algorithm and to illustrate its applications. The procedure has been implemented in Mathematica.

  10. A hybrid intelligent algorithm for portfolio selection problem with fuzzy returns

    Science.gov (United States)

    Li, Xiang; Zhang, Yang; Wong, Hau-San; Qin, Zhongfeng

    2009-11-01

    Portfolio selection theory with fuzzy returns has been well developed and widely applied. Within the framework of credibility theory, several fuzzy portfolio selection models have been proposed such as mean-variance model, entropy optimization model, chance constrained programming model and so on. In order to solve these nonlinear optimization models, a hybrid intelligent algorithm is designed by integrating simulated annealing algorithm, neural network and fuzzy simulation techniques, where the neural network is used to approximate the expected value and variance for fuzzy returns and the fuzzy simulation is used to generate the training data for neural network. Since these models are used to be solved by genetic algorithm, some comparisons between the hybrid intelligent algorithm and genetic algorithm are given in terms of numerical examples, which imply that the hybrid intelligent algorithm is robust and more effective. In particular, it reduces the running time significantly for large size problems.

  11. A Generalized Measure for the Optimal Portfolio Selection Problem and its Explicit Solution

    Directory of Open Access Journals (Sweden)

    Zinoviy Landsman

    2018-03-01

    Full Text Available In this paper, we offer a novel class of utility functions applied to optimal portfolio selection. This class incorporates as special cases important measures such as the mean-variance, Sharpe ratio, mean-standard deviation and others. We provide an explicit solution to the problem of optimal portfolio selection based on this class. Furthermore, we show that each measure in this class generally reduces to the efficient frontier that coincides or belongs to the classical mean-variance efficient frontier. In addition, a condition is provided for the existence of the a one-to-one correspondence between the parameter of this class of utility functions and the trade-off parameter λ in the mean-variance utility function. This correspondence essentially provides insight into the choice of this parameter. We illustrate our results by taking a portfolio of stocks from National Association of Securities Dealers Automated Quotation (NASDAQ.

  12. Instruction texts and problems for the training and examination of selected personnel at research nuclear facilities

    International Nuclear Information System (INIS)

    Matejka, K.; Fleischhans, J.; Hejzlar, R.

    1994-01-01

    The publication comprises 6 separate brochures: (1) Selected chapters in reactor theory; (2) Experimental education methods; (3) Research and experimental reactors; (4.1) Technical description of the LVR-15 reactor; (4.2) Technical description of the LR-0 reactor; (4.3) Technical description of the VR-1 reactor; (5) Research reactor safety and operation; and (6) Database of problems for qualification examinations. Brochure No. 4 consists of 3 separate parts. The publication is intended for the training and examination of the following research reactor staff: reactor operator, shift engineer, control physicist, and start-up group head. (J.B.)

  13. Adaptation Problems of the Post Industrial Heritage on the Example of Selected Objects of Bydgoszcz

    Science.gov (United States)

    Pszczółkowski, Michał

    2016-09-01

    Post-industrial architecture was until recently regarded as devoid of value and importance due to obsolescence, but this awareness has been a clear change in recent years. The old factories become full-fledged cultural heritage, as evidenced by the inclusion of buildings and complexes of this type in the register of monuments and protected by their conservator. More and more often, therefore, one undertakes revitalization of degraded brownfield sites, and within these treatments - conversion works. Specific issues and problems related to the adaptation of industrial facilities are discussed in the article on the basis of selected examples, completed in recent years in Bydgoszcz.

  14. Selected problems associated with the treatment and care for patients with colostomy – part 2

    Science.gov (United States)

    Kachaniuk, Hanna; Szadowska-Szlachetka, Zdzisława; Charzyńska-Gula, Marianna; Kocka, Katarzyna; Bartoszek, Agnieszka; Celej-Szuster, Jolanta

    2013-01-01

    Generally, ostomy is a purposeful connection of the lumen of the intestine with abdominal integuments by surgery. The study presents practical solutions related to care for the colostomy patient, i.e. an ostomy on the large intestine. The following issues will be discussed: regulating the defecation cycle, risk connected with improper selection of ostomy equipment, instruction on colostomy irrigation with practical advice and irrigation equipment supply. The knowledge of these rules and mastering them in practice is to provide ostomy patients not only with highest-standard care and help but also to prepare them for dealing with problems independently, i.e. for self-care. PMID:24596509

  15. Selected problems associated with the treatment and care for patients with colostomy - part 2.

    Science.gov (United States)

    Muzyczka, Katarzyna; Kachaniuk, Hanna; Szadowska-Szlachetka, Zdzisława; Charzyńska-Gula, Marianna; Kocka, Katarzyna; Bartoszek, Agnieszka; Celej-Szuster, Jolanta

    2013-01-01

    Generally, ostomy is a purposeful connection of the lumen of the intestine with abdominal integuments by surgery. The study presents practical solutions related to care for the colostomy patient, i.e. an ostomy on the large intestine. The following issues will be discussed: regulating the defecation cycle, risk connected with improper selection of ostomy equipment, instruction on colostomy irrigation with practical advice and irrigation equipment supply. The knowledge of these rules and mastering them in practice is to provide ostomy patients not only with highest-standard care and help but also to prepare them for dealing with problems independently, i.e. for self-care.

  16. Fuzzy Multicriteria Model for Selection of Vibration Technology

    Directory of Open Access Journals (Sweden)

    María Carmen Carnero

    2016-01-01

    Full Text Available The benefits of applying the vibration analysis program are well known and have been so for decades. A large number of contributions have been produced discussing new diagnostic, signal treatment, technical parameter analysis, and prognosis techniques. However, to obtain the expected benefits from a vibration analysis program, it is necessary to choose the instrumentation which guarantees the best results. Despite its importance, in the literature, there are no models to assist in taking this decision. This research describes an objective model using Fuzzy Analytic Hierarchy Process (FAHP to make a choice of the most suitable technology among portable vibration analysers. The aim is to create an easy-to-use model for processing, manufacturing, services, and research organizations, to guarantee adequate decision-making in the choice of vibration analysis technology. The model described recognises that judgements are often based on ambiguous, imprecise, or inadequate information that cannot provide precise values. The model incorporates judgements from several decision-makers who are experts in the field of vibration analysis, maintenance, and electronic devices. The model has been applied to a Health Care Organization.

  17. Study on the partner selecting method of strategic alliance in high and new technology enterprises

    Institute of Scientific and Technical Information of China (English)

    王宏起; 唐宇; 迟运领

    2004-01-01

    A successful and effective strategic alliance involves many factors, of which selecting a proper partner is the most important factor to achieve the success of the alliance. In view of the characteristics of strategic alliance in high and new technology enterprises and according to the analysis on the standards of partner selecting and the factors of the success of alliance, this paper does some deeper research on the partner selecting and the alliance evaluation process from the perspective of different strategic levels by using a fuzzy comprehensive evaluating method, thus providing a method to select the alliance partner for high and new technology enterprises in China.

  18. Proliferating problems: US management of strategic technology after the Cold War

    International Nuclear Information System (INIS)

    Long, W.J.

    1992-01-01

    The end of the Cold War, political revolutions in Central and Eastern Europe, the globalization of commercial markets, and the proliferation of dangerous technologies to many unstable regions present new challenges for the management of strategic technology. Technology controls designed to enhance national security must address the economic costs of such restrictions. In relations with former Cold War adversaries, technology transfer policy must find innovative ways to encourage cooperative problem solving and pluralistic, democratic, and market-oriented reforms. Also, policy must respond to new threats posed by proliferation in a way that recognizes the limits of technology controls and the need to balance US control interests with demands for technologies with legitimate commercial purposes. Recently, US strategic technology policy has reduced barriers that have traditionally impeded the ability of US exporters to do business in the global marketplace, and US policy is evolving to play a cautious but constructive role in East-West relations. To address more effectively the challenge of proliferation, however, policy makers must better coordinate technology controls with US arms, aid, and diplomatic initiatives toward nations and regions of concern. The first steps toward more effective policy will involve breaking down inter-agency barriers domestically and strengthening emerging multilateral institutions. 23 refs

  19. Technological problems and counter-measures on equipment materials for reprocessing of high burnup fuels

    International Nuclear Information System (INIS)

    Kiuchi, K.; Kato, T.; Motooka, H.; Hamada, S.

    2002-01-01

    The reliability of structural materials is considered as one of the most important technological issues on the commercial reprocessing of high burnup fuels. The durability prediction study of equipment materials used in commercial purex process has been conducted in the JAERI. From the experimental results obtained by scaled mock-up tests and laboratory tests, the stress corrosion cracking (SCC) for a dissolvor made of zirconium and the trans-passive corrosion of heat transfer tubes for evaporators made of austenitic stainless steels have been clarified as critical issues on the reliability. The susceptibility to these failures increases with the amount of TRU and FP elements included in spent fuels, because Np, Pu, Ru, Pd act as strong oxidizers. As counter-measures against these problems, the development of the modified alloys is going on in the JAERI. It has been found that the intergranular corrosion resistance of stainless steels is possible to be completely improved by purifying the electron beam melting process and by modifying the metallographic structure. The other counter measure is to inhibit the trans-passive corrosion by addition of oxide film former elements such as W and Si. It has also been found that the susceptibility to SCC of Zr can be improved by addition of titanium. However, the addition of titanium decreases the corrosion resistance of Zr. We selected niobium alloys as alternative materials to zirconium. By addition of tungsten to the niobium, the corrosion resistance and the mechanical strength have been improved. This niobium alloy can be used in heavily corrosive nitric acid contaminated with fluorine. It is considered that the difference between corrosion resistance of Zr and Nb-alloys is attributed to the chemical stability of the oxide films (MO 2 on Zr and M 2 O 5 on Nb). (author)

  20. Effect of problem solving support and cognitive style on idea generation: Implications for Technology-Enhanced-Learning

    NARCIS (Netherlands)

    Stoyanov, Slavi; Kirschner, Paul A.

    2008-01-01

    Stoyanov, S., & Kirschner, P. (2007). Effect of problem solving support and cognitive style on idea generation: Implications for Technology-Enhanced-Learning. Journal of Research on Technology in Education, 40(1), 49-63.

  1. Decision analysis for the selection of tank waste retrieval technology

    International Nuclear Information System (INIS)

    DAVIS, FREDDIE J.; DEWEESE, GREGORY C.; PICKETT, WILLIAM W.

    2000-01-01

    The objective of this report is to supplement the C-104 Alternatives Generation and Analysis (AGA) by providing a decision analysis for the alternative technologies described therein. The decision analysis used the Multi-Attribute Utility Analysis (MUA) technique. To the extent possible information will come from the AGA. Where data are not available, elicitation of expert opinion or engineering judgment is used and reviewed by the authors of the AGA. A key element of this particular analysis is the consideration of varying perspectives of parties interested in or affected by the decision. The six alternatives discussed are: sluicing; sluicing with vehicle mounted transfer pump; borehole mining; vehicle with attached sluicing nozzle and pump; articulated arm with attached sluicing nozzle; and mechanical dry retrieval. These are evaluated using four attributes, namely: schedule, cost, environmental impact, and safety

  2. Coping with Atmospheric Turbulence in the Selection of Laser Hardening Technology for FCS Targeting Systems

    National Research Council Canada - National Science Library

    Pritchett, Timothy M

    2004-01-01

    ... by frequency-agile battlefield lasers at both long and short range. Evidently, the selection of sensor protection technologies for incorporation into the final targeting system will be based on their optical limiting performance under field conditions...

  3. Development of binary technologies of radiotherapy of malignant neoplasms: condition and problems

    Directory of Open Access Journals (Sweden)

    Igor N. Sheino

    2017-01-01

    Full Text Available The review is devoted to the problems of the development of binary technologies of radiation therapy - neutron and photon-capture therapy of malignant neoplasms. These technologies are based on the principle of “biological” targeting: irradiation of a tumor with pre-delivered special preparations increasing energy release and the relative biological efficiency of primary radiation. The basis of methods, characteristics of sources of external irradiation and used preparations, and stages of development of technologies are described. The development and implementation of binary technologies attract a great number of researchers but are restrained by the shortage of operating sources of epithermal neutrons (reactors, neutron generators based on accelerators and the lack of accurate radiation dosimetry planning systems that takes into account the dynamics and accumulation of drugs in tumors.

  4. Decision-making and problem-solving methods in automation technology

    Science.gov (United States)

    Hankins, W. W.; Pennington, J. E.; Barker, L. K.

    1983-01-01

    The state of the art in the automation of decision making and problem solving is reviewed. The information upon which the report is based was derived from literature searches, visits to university and government laboratories performing basic research in the area, and a 1980 Langley Research Center sponsored conferences on the subject. It is the contention of the authors that the technology in this area is being generated by research primarily in the three disciplines of Artificial Intelligence, Control Theory, and Operations Research. Under the assumption that the state of the art in decision making and problem solving is reflected in the problems being solved, specific problems and methods of their solution are often discussed to elucidate particular aspects of the subject. Synopses of the following major topic areas comprise most of the report: (1) detection and recognition; (2) planning; and scheduling; (3) learning; (4) theorem proving; (5) distributed systems; (6) knowledge bases; (7) search; (8) heuristics; and (9) evolutionary programming.

  5. A Technology Selection Framework for Integrating Manufacturing within a Supply Chain

    DEFF Research Database (Denmark)

    Farooq, Sami; O' Brien, Chris

    2012-01-01

    This paper describes a structured analytical approach for selecting a manufacturing technology. A framework consisting of six integrated steps is proposed by considering the growing importance of supply chains in manufacturing organisations. The framework makes use of Analytical Hierarchy (AHP......) approach combined with Strategic Assessment Model (SAM) to evaluate and select the technologies appropriate for providing overall competitive advantage. The framework is intended to assist industrial managers in promoting manufacturing and supply chain collaboration and coordination by including intra...

  6. Portfolio selection problem: a comparison of fuzzy goal programming and linear physical programming

    Directory of Open Access Journals (Sweden)

    Fusun Kucukbay

    2016-04-01

    Full Text Available Investors have limited budget and they try to maximize their return with minimum risk. Therefore this study aims to deal with the portfolio selection problem. In the study two criteria are considered which are expected return, and risk. In this respect, linear physical programming (LPP technique is applied on Bist 100 stocks to be able to find out the optimum portfolio. The analysis covers the period April 2009- March 2015. This period is divided into two; April 2009-March 2014 and April 2014 – March 2015. April 2009-March 2014 period is used as data to find an optimal solution. April 2014-March 2015 period is used to test the real performance of portfolios. The performance of the obtained portfolio is compared with that obtained from fuzzy goal programming (FGP. Then the performances of both method, LPP and FGP are compared with BIST 100 in terms of their Sharpe Indexes. The findings reveal that LPP for portfolio selection problem is a good alternative to FGP.

  7. The "Second Place" Problem: Assistive Technology in Sports and (Re) Constructing Normal.

    Science.gov (United States)

    Baker, D A

    2016-02-01

    Objections to the use of assistive technologies (such as prostheses) in elite sports are generally raised when the technology in question is perceived to afford the user a potentially "unfair advantage," when it is perceived as a threat to the purity of the sport, and/or when it is perceived as a precursor to a slippery slope toward undesirable changes in the sport. These objections rely on being able to quantify standards of "normal" within a sport so that changes attributed to the use of assistive technology can be judged as causing a significant deviation from some baseline standard. This holds athletes using assistive technologies accountable to standards that restrict their opportunities to achieve greatness, while athletes who do not use assistive technologies are able to push beyond the boundaries of these standards without moral scrutiny. This paper explores how constructions of fairness and "normality" impact athletes who use assistive technology to compete in a sporting venue traditionally populated with "able-bodied" competitors. It argues that the dynamic and obfuscated construction of "normal" standards in elite sports should move away from using body performance as the measuring stick of "normal," toward alternate forms of constructing norms such as defining, quantifying, and regulating the mechanical actions that constitute the critical components of a sport. Though framed within the context of elite sports, this paper can be interpreted more broadly to consider problems with defining "normal" bodies in a society in which technologies are constantly changing our abilities and expectations of what normal means.

  8. Some problems on domestic technology development from a point of fabricator of nuclear power plant. [Japan

    Energy Technology Data Exchange (ETDEWEB)

    Watamori, T [Hitachi Ltd., Tokyo (Japan)

    1976-06-01

    During past 20 years, the nuclear power industry in Japan has introduced foreign technology, digested it in a short period, and continued to research and develop domestic technology. Now, 95% of the machinery and equipments for nuclear power generation with light water reactors can be produced domestically, and some technologies are going to be exported. However, the nuclear power industry is still in a severe environment. The progress of the development of nuclear power plants passed the periods of organizational preparation, the construction of research reactors, the import of foreign technologies and reactors for practical use, and the construction of domestically produced reactors for practical use. The supplying capacity of the nuclear power industry in Japan reached 6 units of 1,000 MW yearly, but in order to meet the long term plan of nuclear power generation, this capacity must be further enhanced. The problems in the promotion of domestic production are the establishment of independent technologies, the promotion of standardization, the strengthening of business basis, the upbringing of relating enterprises, and the acceleration of national projects. Since the energy crisis, the trend of filling up energy demand with nuclear power generation became conspicuous, but for the expansion of export, the problems of safety guarantee, nuclear fuel cycle, and financial measures must be solved with government aid.

  9. Some problems on domestic technology development from a point of fabricator of nuclear power plant

    International Nuclear Information System (INIS)

    Watamori, Tsutomu

    1976-01-01

    During past 20 years, the nuclear power industry in Japan has introduced foreign technology, digested them in short period, and continued to research and develop domestic technology. Now, 95% of the machinery and equipments for nuclear power generation with light water reactors can be produced domestically, and some technologies are going to be exported. However, the nuclear power industry is still in severe environment. The progress of the development of nuclear power plants passed the periods of organizational preparation, the construction of research reactors, the import of foreign technologies and reactors for practical use, and the construction of domestically produced reactors for practical use. The supplying capacity of the nuclear power industry in Japan reached 6 units of 1,000 MW yearly, but in order to meet the long term plan of nuclear power generation, this capacity must be further enhanced. The problems in the promotion of domestic production are the establishment of independent technologies, the promotion of standardization, the strengthening of business basis, the upbringing of relating enterprises, and the acceleration of national projects. Since the energy crisis, the trend of filling up energy demand with nuclear power generation became conspicuous, but for the expansion of export, the problems of safety guarantee, nuclear fuel cycle, and financial measures must be solved with government aid. (Kako, I.)

  10. Enhanced Sampling and Analysis, Selection of Technology for Testing

    Energy Technology Data Exchange (ETDEWEB)

    Svoboda, John; Meikrantz, David

    2010-02-01

    The focus of this study includes the investigation of sampling technologies used in industry and their potential application to nuclear fuel processing. The goal is to identify innovative sampling methods using state of the art techniques that could evolve into the next generation sampling and analysis system for metallic elements. This report details the progress made in the first half of FY 2010 and includes a further consideration of the research focus and goals for this year. Our sampling options and focus for the next generation sampling method are presented along with the criteria used for choosing our path forward. We have decided to pursue the option of evaluating the feasibility of microcapillary based chips to remotely collect, transfer, track and supply microliters of sample solutions to analytical equipment in support of aqueous processes for used nuclear fuel cycles. Microchip vendors have been screened and a choice made for the development of a suitable microchip design followed by production of samples for evaluation by ANL, LANL, and INL on an independent basis.

  11. Technology selection for hydrogen production using nuclear energy

    International Nuclear Information System (INIS)

    Siti Alimah; Erlan Dewita

    2008-01-01

    The NPP can either be used to produce electricity, or as heat source for non-electric applications (cogeneration). High Temperature Reactor (HTR) with high outlet coolant temperature around 900~1000 o C, is a reactor type potential for cogeneration purposes such as hydrogen production and other chemical industry processes that need high heat. Considering the national energy policy that a balanced arrangement of renewable and unrenewable natural resources has to be made to keep environmental conservation for the sake of society prosperity in the future, hydrogen gas production using nuclear heat is an appropriate choice. Hydrogen gas is a new energy which is environmentally friendly that it is a prospecting alternative energy source in the future. Within the study, a comparison of three processes of hydrogen gas production covering electrolysis, steam reforming and sulfur-iodine cycle, have been conducted. The parameters that considered are the production cost, capital cost and energy cost, technological status, the independence of fossil fuel, the environmental friendly aspect, as well as the efficiency and the independence of corrosion-resistance material. The study result showed that hydrogen gas production by steam reforming is a better process compared to electrolysis and sulfur-iodine process. Therefore, steam reforming process can be a good choice for hydrogen gas production using nuclear energy in Indonesia. (author)

  12. CO2 Selective Potentiometric Sensor in Thick-film Technology

    Directory of Open Access Journals (Sweden)

    Ralf Moos

    2008-08-01

    Full Text Available A potentiometric sensor device based on screen-printed Nasicon films was investigated. In order to transfer the promising sensor concept of an open sodium titanate reference to thick film technology, “sodium-rich” and “sodium-poor” formulations were compared. While the “sodium-rich” composition was found to react with the ion conducting Nasicon during thermal treatment, the “sodium-poor” reference mixture was identified as an appropriate reference composition. Screen-printed sensor devices were prepared and tested with respect to CO2 response, reproducibility, and cross-interference of oxygen. Excellent agreement with the theory was observed. With the integration of a screen-printed heater, sensor elements were operated actively heated in a cold gas stream.

  13. Optimization Techniques for Design Problems in Selected Areas in WSNs: A Tutorial.

    Science.gov (United States)

    Ibrahim, Ahmed; Alfa, Attahiru

    2017-08-01

    This paper is intended to serve as an overview of, and mostly a tutorial to illustrate, the optimization techniques used in several different key design aspects that have been considered in the literature of wireless sensor networks (WSNs). It targets the researchers who are new to the mathematical optimization tool, and wish to apply it to WSN design problems. We hence divide the paper into two main parts. One part is dedicated to introduce optimization theory and an overview on some of its techniques that could be helpful in design problem in WSNs. In the second part, we present a number of design aspects that we came across in the WSN literature in which mathematical optimization methods have been used in the design. For each design aspect, a key paper is selected, and for each we explain the formulation techniques and the solution methods implemented. We also provide in-depth analyses and assessments of the problem formulations, the corresponding solution techniques and experimental procedures in some of these papers. The analyses and assessments, which are provided in the form of comments, are meant to reflect the points that we believe should be taken into account when using optimization as a tool for design purposes.

  14. How Important Are Student-Selected versus Instructor-Selected Literature Resources for Students' Learning and Motivation in Problem-Based Learning?

    Science.gov (United States)

    Wijnia, Lisette; Loyens, Sofie M.; Derous, Eva; Schmidt, Henk G.

    2015-01-01

    In problem-based learning students are responsible for their own learning process, which becomes evident when they must act independently, for example, when selecting literature resources for individual study. It is a matter of debate whether it is better to have students select their own literature resources or to present them with a list of…

  15. Software Technologies - 8th International Joint Conference, ICSOFT 2013 : Revised Selected Papers

    NARCIS (Netherlands)

    Cordeiro, José; van Sinderen, Marten J.

    2014-01-01

    The present book includes extended and revised versions of a set of selected papers from the 8th International Joint Conference on Software Technologies (ICSOFT 2013), which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information,

  16. Secondary Mathematics Pre-Service Teachers' Processes of Selection and Integration of Technology

    Science.gov (United States)

    Uzan, Erol

    2017-01-01

    This study investigated secondary mathematics pre-service teachers' (PSTs) knowledge of resources in terms of digital technologies, and explored the processes of both selection and integration of technology into their lesson plans. This study employed a case study design. Participants were six secondary mathematics PSTs who enrolled in a methods…

  17. Exploring the Use of Information Communication Technologies by Selected Caribbean Extension Officers

    Science.gov (United States)

    Strong, Robert; Ganpat, Wayne; Harder, Amy; Irby, Travis L.; Lindner, James R.

    2014-01-01

    Purpose: The purpose of this study was to describe selected Caribbean extension officers' technology preferences and examine factors that may affect their technology preferences. Design/methodology/approach: The sample consisted of extension officers (N = 119) participating in professional development training sessions in Grenada, Belize and Saint…

  18. Mobilizing science and technology to address the problems of the world's poor

    International Nuclear Information System (INIS)

    Sachs, J.

    2001-01-01

    Full text: Writing in The Economist of 15 February this year, Prof. Sachs raised several points that are relevant to any discussion of technical co-operation for sustainable development. He urges a stronger emphasis on the transfer of appropriate technology, and supports expanded roles for United Nations organizations in helping to solve the problems of the world's poorest countries. Here are some excerpts: 'A(n)...important challenge, as yet mainly unrecognised, is that of mobilising global science and technology to address the crises of public health, agricultural productivity, environmental degradation and demographic stress confronting these countries (i.e., the 42 so-called Highly Indebted Poor Countries - HIPCs, ed.) In part this will require that the wealthy governments enable the grossly underfinanced and underempowered United Nations institutions to become vibrant and active partners of human development.' The conditions in many HIPCs are worsening dramatically, even as global science and technology create new surges of wealth and well-being in richer countries. The problem is that, for myriad reasons, the technological gains in wealthy countries do not readily diffuse to the poorest ones....Research and development of new technologies are overwhelmingly directed at rich-country problems. To the extent that the poor face distinctive challenges, science and technology must be directed purposefully towards them (emphasis added). In today's global set-up, that rarely happens....Currently, the international system fails to meet the technological needs of the world's poorest.' Prof. Sachs has been one of the few development economists to consistently remind us that most of the world's poor live under vastly different environmental conditions - mainly tropical climates with their often unique disease agents and agricultural factors - than most of the rich. He points out that sustainable development is not possible unless the underlying ecological constraints are

  19. The Chemical Technology Division at Argonne National Laboratory: Applying chemical innovation to environmental problems

    International Nuclear Information System (INIS)

    1995-01-01

    The Chemical Technology Division is one of the largest technical divisions at Argonne National Laboratory, a leading center for research and development related to energy and environmental issues. Since its inception in 1948, the Division has pioneered in developing separations processes for the nuclear industry. The current scope of activities includes R ampersand D on methods for disposing of radioactive and hazardous wastes and on energy conversion processes with improved efficiencies, lower costs, and reduced environmental impact. Many of the technologies developed by CMT can be applied to solve manufacturing as well as environmental problems of industry

  20. Hybrid nested sampling algorithm for Bayesian model selection applied to inverse subsurface flow problems

    KAUST Repository

    Elsheikh, Ahmed H.

    2014-02-01

    A Hybrid Nested Sampling (HNS) algorithm is proposed for efficient Bayesian model calibration and prior model selection. The proposed algorithm combines, Nested Sampling (NS) algorithm, Hybrid Monte Carlo (HMC) sampling and gradient estimation using Stochastic Ensemble Method (SEM). NS is an efficient sampling algorithm that can be used for Bayesian calibration and estimating the Bayesian evidence for prior model selection. Nested sampling has the advantage of computational feasibility. Within the nested sampling algorithm, a constrained sampling step is performed. For this step, we utilize HMC to reduce the correlation between successive sampled states. HMC relies on the gradient of the logarithm of the posterior distribution, which we estimate using a stochastic ensemble method based on an ensemble of directional derivatives. SEM only requires forward model runs and the simulator is then used as a black box and no adjoint code is needed. The developed HNS algorithm is successfully applied for Bayesian calibration and prior model selection of several nonlinear subsurface flow problems. © 2013 Elsevier Inc.

  1. Technological Solutions to Social and Citizen Problems. The Case of Civic and Public Challenges in Mexico

    Directory of Open Access Journals (Sweden)

    Martin Adalberto TENA-ESPINOZA-DE-LOS-MONTEROS

    2017-04-01

    Full Text Available This paper describes the process of civic innovation that, based on technological solutions and open initiatives, the civic society’s organization Codeando México suggests for the attention and solution of social and civic problems in Mexico. The Retos Cívicos (Civic Challenges and Retos Públicos (Public Challenges initiatives are addressed and described as experiences of innovation in the implementation of technological strategies for the solution of social and civic problems. A reflection is made on the civic appropriation of the ICTs and its irruption in the processes of innovation, as well as on the impact that the ICTs have in the conformation of a new civic ecosystem. Last, the strategies of Hacking cívico (Civic Hacking and Comunidades Cívicas (Civic Communities that the Codeando México organization promotes as a model for the linkage and civic participation within the frame of civic innovation, are mentioned.

  2. Selection and evaluation of technologies for oil rim preparation of Zapolyarnoye oilfield

    Science.gov (United States)

    Vazhenina, L. V.

    2017-10-01

    The article deals with various technologies for the oil rims preparation of Zapolyarnoye oil and gas condensate field. The following circuits were considered for the selection of the technology of preparation of extracted fluid: low-temperature separation (STC); low-temperature condensation (LTC); a low-temperature rectification (NTR); low-temperature absorption (LTA); membrane technology (Mt). Diagrams of these processes were collected and tested in the system HYSYS process simulation. Efficiency analysis of hydrocarbon raw materials preparation on the basis of functions, selection of components and narrow fractions.

  3. Present status and problems of remote systems technology in nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    1989-02-01

    This reports the activities of Special Committee on Remote Systems Technology, Atomic Energy Society of Japan, during the period from Oct. 1984 to Sep. 1988. The Committee studied and reviewed the present status and problems of remote operation and maintenance in various fields of nuclear industry. Reported items are; reactor operation, reprocessing, nuclear fusion and decommissioning. It also reviews robotics and remote systems tehcnology applied to space and marine development.

  4. Present status and problems of remote systems technology in nuclear industry

    International Nuclear Information System (INIS)

    1989-01-01

    This reports the activities of Special Committee on Remote Systems Technology, Atomic Energy Society of Japan, during the period from Oct. 1984 to Sep. 1988. The Committee studied and reviewed the present status and problems of remote operation and maintenance in various fields of nuclear industry. Reported items are; reactor operation, reprocessing, nuclear fusion and decommissioning. It also reviews robotics and remote systems tehcnology applied to space and marine development. (author)

  5. Technological and economical problems in exploitation of coal stripe mines in Bulgaria

    International Nuclear Information System (INIS)

    Khristov, Stoyan; Borisov, Bogomil

    1997-01-01

    Taking into consideration the restructure of the mining-energetic industry into the new economic conditions, financial, technical and technological problems are analysed, as well as their influence on the economic effects of the coal production in Bulgaria. Ecological standards for environmental policy are noticed. Perspectives for development of the coal production industry are pointed out, especially in the mining/power complex Maritsa East, one of the most important region for power generation in Bulgaria

  6. Problems and criteria of quality improvement in end face mechanical seal rings through technological methods

    Science.gov (United States)

    Tarelnik, V.; Belous, A.; Antoszewski, B.; Zukov, A.

    2017-08-01

    In this paper are presented the recommendations for material’s selections of the mechanical seals rings and basic productive and operating requirements. The system of a directional selection of technology that ensures the required quality of working surfaces of the mechanical seals rings covers their entire life cycle. The mathematical frictional model is proposed as an instrument for calculating a linear and weighing abrasion of the mechanical seals rings and helps to improve selection’s criteria and the most rational method of strengthening.

  7. A methodology for the valuation and selection of adaptable technology portfolios and its application to small and medium airports

    Science.gov (United States)

    Pinon, Olivia J.

    -step process developed in this research leverages the benefits yielded by impact assessment techniques, system dynamics modeling, and real options analysis to 1) provide the decision maker with a rigorous, structured, and traceable process for technology selection, 2) assess the combined impact of interrelated technologies, 3) support the translation of technology impact factors into airport performance indicators, and help identify the factors that drive the need for capacity expansion, and finally 4) enable the quantitative assessment of the strategic value of embedding flexibility in the formulation of technology portfolios and investment options. In particular, the development of this methodology highlights the successful implementation of relevance tree analysis, morphological analysis, filters and dependency tables to support the aforementioned process for technology selection. Further, it illustrates the limited capability of Cross Impact Analysis to identify technology relationships for the problem at hand. Finally, this methodology demonstrates, through a change in demand at the airport modeled, the importance of being able to weigh both the technological and strategic performance of the technology portfolios considered. In particular, it illustrates the impact that the level of traffic, the presence of congestion, the timing and sequence of investments, and the number of technologies included, have on the strategic value of a portfolio. Hence, by capturing the time dimension and technology causality impacts in technology portfolio selection, this work helps identify key technologies or technology groupings, and assess their performance on airport metrics. By embedding flexibility in the formulation of investment scenarios, it provides the decision maker with a more accurate picture of the options available to him, as well as the time and sequence under which these should be exercised.

  8. Supporting Problem Solving with Case-Stories Learning Scenario and Video-based Collaborative Learning Technology

    Directory of Open Access Journals (Sweden)

    Chun Hu

    2004-04-01

    Full Text Available In this paper, we suggest that case-based resources, which are used for assisting cognition during problem solving, can be structured around the work of narratives in social cultural psychology. Theories and other research methods have proposed structures within narratives and stories which may be useful to the design of case-based resources. Moreover, embedded within cases are stories which are contextually rich, supporting the epistemological groundings of situated cognition. Therefore the purposes of this paper are to discuss possible frameworks of case-stories; derive design principles as to “what” constitutes a good case story or narrative; and suggest how technology can support story-based learning. We adopt video-based Computer-Supported Collaborative Learning (CSCL technology to support problem solving with case-stories learning scenarios. Our hypothesis in this paper is that well-designed case-based resources are able to aid in the cognitive processes undergirding problem solving and meaning making. We also suggest the use of an emerging video-based collaborative learning technology to support such an instructional strategy.

  9. Problems of teaching students to use the featured technologies in the area of semantic web

    Science.gov (United States)

    Klimov, V. V.; Chernyshov, A. A.; Balandina, A. I.; Kostkina, A. D.

    2017-01-01

    The following paper contains the description of up-to-date technologies in the area of web-services development, service-oriented architecture and the Semantic Web. The paper contains the analysis of the most popular and widespread technologies and methods in the semantic web area which are used in the developed educational course. In the paper, we also describe the problem of teaching students to use these technologies and specify conditions for the creation of the learning and development course. We also describe the main exercise for personal work and skills, which all the students learning this course have to gain. Moreover, in the paper we specify the problem with software which students are going to use while learning this course. In order to solve this problem, we introduce the developing system which will be used to support the laboratory works. For this moment this system supports only the fourth work execution, but our following plans contain the expansion of the system in order to support the leftover works.

  10. Design evaluation in technology assessment: Illustrated by auditory impedance and sound distribution problems

    Science.gov (United States)

    Halldane, J. F.

    1972-01-01

    Technology is considered as a culture for changing a physical world and technology assessment questions the inherent cultural capability to modify power and material in support of living organisms. A comprehensive goal-parameter-synthesis-criterion specification is presented as a basis for a rational assessment of technology. The thesis queries the purpose of the assessed problems, the factors considered, the relationships between factors, and the values assigned those factors to accomplish the appropriate purpose. Stationary and sequential evaluation of enviro-organismic systems are delegated to the responsible personalities involved in design; from promoter/designer through contractor to occupant. Discussion includes design goals derived from organismic factors, definitions of human responses which establish viable criteria and relevant correlation models, linking stimulus parameters, and parallel problem-discipline centered design organization. A consistent concept of impedance, as a degradation in the performance of a specified parameter, is introduced to overcome the arbitrary inoperative connotations of terms like noise, discomfort, and glare. Applications of the evaluative specification are illustrated through design problems related to auditory impedance and sound distribution.

  11. Composite risers for deep-water offshore technology: Problems and prospects. 1. Metal-composite riser

    Science.gov (United States)

    Beyle, A. I.; Gustafson, C. G.; Kulakov, V. L.; Tarnopol'skii, Yu. M.

    1997-09-01

    Prospects for the application of advanced composites in the offshore technology of oil production are considered. The use of composites in vertical pipelines-risers seems to be the most efficient. The operating loads are studied and the attendant problems are formulated. A comparative analysis of the characteristics of metal, composite, and metal-composite deep-water risers is presented. A technique is developed for designing multilayered risers, taking into account the action of internal and external pressures, gravity, and the axial tensile force created by tensioners, as well as the residual technological stresses due to the difference in coefficients of thermal expansion, physical-chemical shrinkage, and force winding. Numerical estimations are given for a two-layered riser with an inner metal layer of steel, titanium, or aluminum alloys and a composite layer of glass- or carbon-fiber plastics formed by circumferential winding. It is shown that the technological stresses substantially affect the characteristics of the riser.

  12. The Description of Problems Relating to Analogies Used in Science and Technology Textbooks

    Directory of Open Access Journals (Sweden)

    Rahmi YAĞBASAN

    2008-01-01

    Full Text Available The aim of this study was to determine the problems concerning the use of analogies ingeneral and analogies used in primary school science and technology lessons inparticular. In this study, descriptive method was used. 4th, 5th, and 8th classes Scienceand Technology course books; 7 th, 8 th classes Science Books were used as a source.Analogies in the course books were classified according to the literature and theproblems found related to the analogies are pointed out in the study. In this study itwas seen that eighty-nine analogies were used in Science and Technology and inScience course books. These analogies were used in descending order as 8, 4, 6, 7, 5class groups. Also it was seen that these analogies were generally at simple andpictorial analogies.

  13. Selected problems in experimental intermediate energy physics. Final technical report, February 1, 1991--January 31, 1994

    International Nuclear Information System (INIS)

    Mayes, B.W.; Hungerford, E.V.; Pinsky, L.S.

    1997-01-01

    A complete description of the research program of the intermediate energy group at the University of Houston may be found in previous progress reports, renewal proposals, and proposals to various accelerator advisory committees. The summaries of activities are presented in the next section. The objectives of the research program are to: (1) investigate selected, forefront problems in experimental intermediate energy physics; (2) educate students in this field of research; and (3) develop the instrumentation necessary to undertake this experimental program. There were three major thrusts of the program: (1) strange particle physics, where a strange quark is embedded in the nuclear medium; (2) muon electro-weak decay, which involves a search for a violation of the standard model of the electro-weak interaction; and (3) measurement of the spin dependent structure function of the neutron and proton

  14. Proposed Project Selection Method for Human Support Research and Technology Development (HSR&TD)

    Science.gov (United States)

    Jones, Harry

    2005-01-01

    The purpose of HSR&TD is to deliver human support technologies to the Exploration Systems Mission Directorate (ESMD) that will be selected for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are acceptable. HSR&TD must select an may of technology development projects, guide them, and either terminate or continue them, so as to maximize the resulting number of usable advanced human support technologies. This paper proposes an effective project scoring methodology to support managing the HSR&TD project portfolio. Researchers strongly disagree as to what are the best technology project selection methods, or even if there are any proven ones. Technology development is risky and outstanding achievements are rare and unpredictable. There is no simple formula for success. Organizations that are satisfied with their project selection approach typically use a mix of financial, strategic, and scoring methods in an open, established, explicit, formal process. This approach helps to build consensus and develop management insight. It encourages better project proposals by clarifying the desired project attributes. We propose a project scoring technique based on a method previously used in a federal laboratory and supported by recent research. Projects are ranked by their perceived relevance, risk, and return - a new 3 R's. Relevance is the degree to which the project objective supports the HSR&TD goal of developing usable advanced human support technologies. Risk is the estimated probability that the project will achieve its specific objective. Return is the reduction in mission life cycle cost obtained if the project is successful. If the project objective technology performs a new function with no current cost, its return is the estimated cash value of performing the new function. The proposed project selection scoring method includes definitions of the criteria, a project evaluation

  15. Bio-technology drawing attention for solution of environmental problems. Kankyo mondai kaiketsu demo chumokusareru bio technology

    Energy Technology Data Exchange (ETDEWEB)

    Shimazaki, A [Bank of Tokyo, Tokyo (Japan)

    1991-06-01

    Explanations are given on the recent movements in the bio-technology applications. In the United States, gene therapy has been applied to patients having damaged immune system, while in Japan the first outdoor experiment is about to begin this year on gene recombined tomatoes. In the area of the marine bio-technology, researches carried out by the industrial, governmental, and academic sectors combined, led by the Ministry of International Trade and Industry have begun, which include such an attractive subject as finding out new kinds of algae living on carbon dioxide as their special favorite diet to use them to prevent the earth warming-up. On the other hand, the difficulty of bio-business is represented by the fact that venture business groups are absorbed into larger chemical companies. In Japan, the bio-business established in individual regions related to soy bean paste and Shoyu sauce industry is a distinct feature. Deregulations and review on the patent system are in progress in the United States and Germany aiming at strengthening the business competitiveness. Expectation is placed on the bio-technology that it will contribute largely in the future to solving such a critical environmental problem as experienced in the Persian Gulf war. 1 tab.

  16. The Problem of Multiple Criteria Selection of the Surface Mining Haul Trucks

    Science.gov (United States)

    Bodziony, Przemysław; Kasztelewicz, Zbigniew; Sawicki, Piotr

    2016-06-01

    Vehicle transport is a dominant type of technological processes in rock mines, and its profit ability is strictly dependent on overall cost of its exploitation, especially on diesel oil consumption. Thus, a rational design of transportation system based on haul trucks should result from thorough analysis of technical and economic issues, including both cost of purchase and its further exploitation, having a crucial impact on the cost of minerals extraction. Moreover, off-highway trucks should be selected with respect to all specific exploitation conditions and even the user's preferences and experience. In this paper a development of universal family of evaluation criteria as well as application of evaluation method for haul truck selection process for a specific exploitation conditions in surface mining have been carried out. The methodology presented in the paper is based on the principles of multiple criteria decision aiding (MCDA) using one of the ranking method, i.e. ELECTRE III. The applied methodology has been allowed for ranking of alternative solution (variants), on the considered set of haul trucks. The result of the research is a universal methodology, and it consequently may be applied in other surface mines with similar exploitation parametres.

  17. Iterated Local Search Algorithm with Strategic Oscillation for School Bus Routing Problem with Bus Stop Selection

    Directory of Open Access Journals (Sweden)

    Mohammad Saied Fallah Niasar

    2017-02-01

    Full Text Available he school bus routing problem (SBRP represents a variant of the well-known vehicle routing problem. The main goal of this study is to pick up students allocated to some bus stops and generate routes, including the selected stops, in order to carry students to school. In this paper, we have proposed a simple but effective metaheuristic approach that employs two features: first, it utilizes large neighborhood structures for a deeper exploration of the search space; second, the proposed heuristic executes an efficient transition between the feasible and infeasible portions of the search space. Exploration of the infeasible area is controlled by a dynamic penalty function to convert the unfeasible solution into a feasible one. Two metaheuristics, called N-ILS (a variant of the Nearest Neighbourhood with Iterated Local Search algorithm and I-ILS (a variant of Insertion with Iterated Local Search algorithm are proposed to solve SBRP. Our experimental procedure is based on the two data sets. The results show that N-ILS is able to obtain better solutions in shorter computing times. Additionally, N-ILS appears to be very competitive in comparison with the best existing metaheuristics suggested for SBRP

  18. The effectiveness of self help technologies for emotional problems in adolescents: a systematic review

    Directory of Open Access Journals (Sweden)

    Bower Peter

    2008-07-01

    Full Text Available Abstract Background Adolescence is a transition period that involves physiological, psychological, and social changes. Emotional problems such as symptoms of anxiety and depression may develop due to these changes. Although many of these problems may not meet diagnostic thresholds, they may develop into more severe disorders and may impact on functioning. However, there are barriers that may make it difficult for adolescents to receive help from health professionals for such problems, one of which is the limited availability of formal psychological therapy. One way of increasing access to help for such problems is through self help technology (i.e. delivery of psychological help through information technology or paper based formats. Although there is a significant evidence base concerning self help in adults, the evidence base is much weaker in adolescents. This study aims to examine the effectiveness of self help technology for the treatment of emotional problems in adolescents by conducting a systematic review of randomized and quasi-experimental evidence. Methods Five major electronic databases were searched: Medline, PsycInfo, Embase, Cochrane Controlled Trials Register and CINAHL. In addition, nine journals were handsearched and the reference lists of all studies were examined for any additional studies. Fourteen studies were identified. Effect sizes were calculated across 3 outcome measures: attitude towards self (e.g. self esteem; social cognition (e.g. self efficacy; and emotional symptoms (i.e. depression and anxiety symptoms. Results Meta analysis showed small, non-significant effect size for attitude towards self (ES = -0.14, 95% CI = -0.72 to 0.43, a medium, non-significant effect size for social cognition (ES = -0.49, 95% CI = -1.23 to 0.25 and a medium, non-significant effect size for emotional symptoms (ES = -0.47, 95% CI = -1.00 to 0.07. However, these findings must be considered preliminary, because of the small number of

  19. Multi-Criteria Knapsack Problem for Disease Selection in an Observation Ward

    International Nuclear Information System (INIS)

    Lurkittikul, N; Kittithreerapronchai, O

    2014-01-01

    The aging population and the introduction of Thailand universal healthcare have increased inpatients and outpatients to public hospitals, particularly to a hospital that provides special and comprehensive health services. Many inpatient wards have experienced large influx of inpatients as the hospitals have to admit all patients regardless their conditions. These overcrowding wards cause stress to medical staffs, block access between medical departments, hospital-acquired infections, and ineffective uses of resources. One way to manage such inundated inpatient is to select some patients whose conditions require less clinical attention or whose lengths of stay are predictable and short and, then, place them at an observation ward. This intermediate ward increases turnover of beds and reduces unnecessary paperwork as patients are considered to be outpatients. In this article, we studied inpatient data of a tertiary care hospital in which an observation ward was considered to alleviate the overcrowding problem at Internal Medicine Department. The analysis of data showed that the hospital can balance inpatient flow by managing a group of patients who is admitted because of treatments ordered by its special clinics. Having explored several alternatives, we suggested patient selection criteria and proposed a layout at an observation ward. The hospital should increase medical beds in a new building ward because the current observation ward can handle 27.3% of total short stay patients, while the observation ward is projected to handle 80% of total short stay patients

  20. Multi-Criteria Knapsack Problem for Disease Selection in an Observation Ward

    Science.gov (United States)

    Lurkittikul, N.; Kittithreerapronchai, O.

    2014-06-01

    The aging population and the introduction of Thailand universal healthcare have increased inpatients and outpatients to public hospitals, particularly to a hospital that provides special and comprehensive health services. Many inpatient wards have experienced large influx of inpatients as the hospitals have to admit all patients regardless their conditions. These overcrowding wards cause stress to medical staffs, block access between medical departments, hospital-acquired infections, and ineffective uses of resources. One way to manage such inundated inpatient is to select some patients whose conditions require less clinical attention or whose lengths of stay are predictable and short and, then, place them at an observation ward. This intermediate ward increases turnover of beds and reduces unnecessary paperwork as patients are considered to be outpatients. In this article, we studied inpatient data of a tertiary care hospital in which an observation ward was considered to alleviate the overcrowding problem at Internal Medicine Department. The analysis of data showed that the hospital can balance inpatient flow by managing a group of patients who is admitted because of treatments ordered by its special clinics. Having explored several alternatives, we suggested patient selection criteria and proposed a layout at an observation ward. The hospital should increase medical beds in a new building ward because the current observation ward can handle 27.3% of total short stay patients, while the observation ward is projected to handle 80% of total short stay patients.

  1. Modeling Multilevel Supplier Selection Problem Based on Weighted-Directed Network and Its Solution

    Directory of Open Access Journals (Sweden)

    Chia-Te Wei

    2017-01-01

    Full Text Available With the rapid development of economy, the supplier network is becoming more and more complicated. It is important to choose the right suppliers for improving the efficiency of the supply chain, so how to choose the right ones is one of the important research directions of supply chain management. This paper studies the partner selection problem from the perspective of supplier network global optimization. Firstly, this paper discusses and forms the evaluation system to estimate the supplier from the two indicators of risk and greenness and then applies the value as the weight of the network between two nodes to build a weighted-directed supplier network; secondly, the study establishes the optimal combination model of supplier selection based on the global network perspective and solves the model by the dynamic programming-tabu search algorithm and the improved ant colony algorithm, respectively; finally, different scale simulation examples are given to testify the efficiency of the two algorithms. The results show that the ant colony algorithm is superior to the tabu search one as a whole, but the latter is slightly better than the former when network scale is small.

  2. Professional Problems Experienced by Information Technology Teachers and Suggested Solutions: Longitudinal Survey

    Directory of Open Access Journals (Sweden)

    Hafize Keser

    2013-02-01

    Full Text Available The study aimed to determine the opinions of teacher candidates in the fourth year of Computer Education & Instructional Technologies department (CEIT on the Problems Experienced by Information Technology (IT Teachers and Suggested Solutions and it has been designed in case study routine taking place within qualitative research tradition and in a longitudinal survey model. The final year IT teacher candidates receiving education in Ankara University Educational Sciences Faculty CEIT department in academic years 2011-2012 and 2012-2013 have formed the study group of the research (N=123. The data obtained in the research by open-end questionnaire have been analysed and interpreted by inductive encoding technique, freuency analysis and descriptive content analysis. At the end of the study carried out, it has been determined that the IT teacher candidates have handled in two sub-dimensions the problems experienced by the IT teachers, these being, problems towards the courses the IT teachers attend and problems regarding the professional lives of IT teachers and suggested solutions in line with these. The leading problems towards the courses the IT teachers attend are that the courses are optional, the courses are grade-free, the course hours are few, the significance of IT not being comprehended very well by the executives, teachers, parents and students, inadequacy of physical means of IT classes and references of the course. And, the main problems regarding professional lives of IT course teachers are the duty, power and responsibility of IT teachers not made clear enough, difficulties in formative teacher practice, course hours which have to be completed by IT teachers not being able to be completed and problem of permanent staff, the courses that must be attended by IT teachers being taugth by teachers from other branches, lack of executives and experts trained from a field to supervise IT and formative teachers. And, the suggested leading

  3. Dynamic problem selection in air traffic control training : A comparison between performance, mental effort and mental efficiency

    NARCIS (Netherlands)

    Camp, Gino; Paas, Fred; Rikers, Remy; van Merrienboer, Jeroen

    2001-01-01

    The differential effects on training and training outcome of four methods of problem selection were investigated in a computer-based training for air traffic control. In one method, training problems were given to the participants in a fixed predetermined sequence, from simple to complex. In the

  4. Decision Analysis Science Modeling for Application and Fielding Selection Applied to Concrete Decontamination Technologies

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Ross, T.L.

    1998-01-01

    Concrete surfaces contaminated with radionuclides present a significant challenge during the decontamination and decommissioning (D and D) process. As structures undergo D and D, coating layers and/or surface layers of the concrete containing the contaminants must be removed for disposal in such a way as to present little to no risk to human health or the environment. The selection of a concrete decontamination technology that is safe, efficient, and cost-effective is critical to the successful D and D of contaminated sites. To support U.S. Department of Energy (DOE) Environmental Management objectives and to assist DOE site managers in the selection of the best-suited concrete floor decontamination technology(s) for a given site, two innovative and three baseline technologies have been assessed under standard, non-nuclear conditions at the Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU). The innovative technologies assessed include the Pegasus Coating Removal System and Textron's Electro-Hydraulic Scabbling System. The three baseline technologies assessed include: the Wheelabrator Blastrac model 1-15D, the NELCO Porta Shot Blast trademark model GPx-1O-18 HO Rider, and the NELCO Porta Shot Blasttrademark model EC-7-2. These decontamination technology assessments provide directly comparable performance data that have previously been available for only a limited number of technologies under restrictive site-specific constraints. Some of the performance data collected during these technology assessments include: removal capability, production rate, removal gap, primary and secondary waste volumes, and operation and maintenance requirements. The performance data generated by this project is intended to assist DOE site managers in the selection of the safest, most efficient, and cost-effective decontamination technologies to accomplish their remediation objectives

  5. Technology Addiction among Treatment Seekers for Psychological Problems: Implication for Screening in Mental Health Setting.

    Science.gov (United States)

    Das, Aswathy; Sharma, Manoj Kumar; Thamilselvan, P; Marimuthu, P

    2017-01-01

    Technology usage has seen an increase among users. The usage varies from social, personal, and psychological reasons. Users are frequently using to overcome mood states as well as to manage the other psychological states. This work is going to explore the information technology use among subjects with a psychiatric disorder. A total of 75 subjects were assessed using background data sheet, internet addiction impairment index, video game use pattern, pornography addiction screening tool and screening for mobile phone use, from in-patient and out-patient setting of tertiary mental health setting. It showed the presence of addiction to mobile, internet, video game, and pornography. Age was found to be negatively correlated with this addiction. Average usage time had been associated with management of mood states. The addiction to information technology had been associated with a delay in initiation of sleep. This work has implication for screening technology addiction among subjects seeking treatment for psychological problems and motivate them to develop the healthy use of technology.

  6. Decision support for selecting exportable nuclear technology using the analytic hierarchy process: A Korean case

    International Nuclear Information System (INIS)

    Lee, Deok Joo; Hwang, Jooho

    2010-01-01

    The Korean government plans to increase strategically focused R and D investment in some promising nuclear technology areas to create export opportunities of technology in a global nuclear market. The purpose of this paper is to present a decision support process for selecting promising nuclear technology with the perspective of exportability by using the AHP based on extensive data gathered from nuclear experts in Korea. In this study, the decision criteria for evaluating the export competitiveness of nuclear technologies were determined, and a hierarchical structure for the decision-making process was systematically developed. Subsequently relative weights of decision criteria were derived using AHP methodology and the export competitiveness of nuclear technology alternatives was quantified to prioritize them. We discuss the implications of our results with a viewpoint toward national nuclear technology policy.

  7. Integration of advanced technologies to enhance problem-based learning over distance: Project TOUCH.

    Science.gov (United States)

    Jacobs, Joshua; Caudell, Thomas; Wilks, David; Keep, Marcus F; Mitchell, Steven; Buchanan, Holly; Saland, Linda; Rosenheimer, Julie; Lozanoff, Beth K; Lozanoff, Scott; Saiki, Stanley; Alverson, Dale

    2003-01-01

    Distance education delivery has increased dramatically in recent years as a result of the rapid advancement of communication technology. The National Computational Science Alliance's Access Grid represents a significant advancement in communication technology with potential for distance medical education. The purpose of this study is to provide an overview of the TOUCH project (Telehealth Outreach for Unified Community Health; http://hsc.unm.edu/touch) with special emphasis on the process of problem-based learning case development for distribution over the Access Grid. The objective of the TOUCH project is to use emerging Internet-based technology to overcome geographic barriers for delivery of tutorial sessions to medical students pursuing rotations at remote sites. The TOUCH project also is aimed at developing a patient simulation engine and an immersive virtual reality environment to achieve a realistic health care scenario enhancing the learning experience. A traumatic head injury case is developed and distributed over the Access Grid as a demonstration of the TOUCH system. Project TOUCH serves as an example of a computer-based learning system for developing and implementing problem-based learning cases within the medical curriculum, but this system should be easily applied to other educational environments and disciplines involving functional and clinical anatomy. Future phases will explore PC versions of the TOUCH cases for increased distribution. Copyright 2003 Wiley-Liss, Inc.

  8. The multi-objective decision making methods based on MULTIMOORA and MOOSRA for the laptop selection problem

    Science.gov (United States)

    Aytaç Adalı, Esra; Tuş Işık, Ayşegül

    2017-06-01

    A decision making process requires the values of conflicting objectives for alternatives and the selection of the best alternative according to the needs of decision makers. Multi-objective optimization methods may provide solution for this selection. In this paper it is aimed to present the laptop selection problem based on MOORA plus full multiplicative form (MULTIMOORA) and multi-objective optimization on the basis of simple ratio analysis (MOOSRA) which are relatively new multi-objective optimization methods. The novelty of this paper is solving this problem with the MULTIMOORA and MOOSRA methods for the first time.

  9. Reduced-Size Integer Linear Programming Models for String Selection Problems: Application to the Farthest String Problem.

    Science.gov (United States)

    Zörnig, Peter

    2015-08-01

    We present integer programming models for some variants of the farthest string problem. The number of variables and constraints is substantially less than that of the integer linear programming models known in the literature. Moreover, the solution of the linear programming-relaxation contains only a small proportion of noninteger values, which considerably simplifies the rounding process. Numerical tests have shown excellent results, especially when a small set of long sequences is given.

  10. Applications of density functional theory calculations to selected problems in hydrocarbon processing

    Science.gov (United States)

    Nabar, Rahul

    Recent advances in theoretical techniques and computational hardware have made it possible to apply Density Functional Theory (DFT) methods to realistic problems in heterogeneous catalysis. Hydrocarbon processing is economically, and strategically, a very important industrial sector in today's world. In this thesis, we employ DFT methods to examine several important problems in hydrocarbon processing. Fischer Tropsch Synthesis (FTS) is a mature technology to convert synthesis gas derived from coal, natural-gas or biomass into liquid fuels, specifically diesel. Iron is an active FTS catalyst, but the absence of detailed reaction mechanisms make it difficult to maximize activity and optimize product distribution. We evaluate thermochemistry, kinetics and Rate Determining Steps (RDS) for Fischer Tropsch Synthesis on several models of Fe catalysts: Fe(110), Fe(211) and Pt promoted Fe(110). Our studies indicated that CO-dissociation is likely to be the RDS under most reaction conditions, but the DFT-calculated activation energy ( Ea) for direct CO dissociation was too large to explain the observed catalyst activity. Consequently we demonstrate that H-assisted CO-dissociation pathways are competitive with direct CO dissociation on both Co and Fe catalysts and could be responsible for a major fraction of the reaction flux (especially at high CO coverages). We then extend this alternative mechanistic model to closed-packed facets of nine transition metal catalysts (Fe, Co, Ni, Ru, Rh, Pd, Os, Ir and Pt). H-assisted CO dissociation offers a kinetically easier route on each of the metals studied. DFT methods are also applied to another problem from the petroleum industry: discovery of poison-resistant, bimetallic, alloy catalysts (poisons: C, S, CI, P). Our systematic screening studies identify several Near Surface Alloys (NSAs) that are expected to be highly poison-resistant yet stable and avoiding adsorbate induced reconstruction. Adsorption trends are also correlated with

  11. Chemical Composition of Selected Beetroot Juices in Relation to Beetroot Production System and Processing Technology

    OpenAIRE

    Renata KAZIMIERCZAK; Agata SIŁAKIEWICZ; Ewelina HALLMANN; Dominika ŚREDNICKA-TOBER; Ewa REMBIAŁKOWSKA

    2016-01-01

    Market offer of vegetable juices in Europe is growing, and the vegetable species and processing technologies used become more diversified resulting in a large range of juice types. At the same time consumers look for natural and safe products with pro-health properties. The aim of this study was to evaluate the nutritional composition of selected juices based on beetroots coming from different agricultural systems and processed according to different technologies. Research material consisted ...

  12. Measuring process performance within healthcare logistics - a decision tool for selecting measuring technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Performance measurement can support the organization in improving the efficiency and effectiveness of logistical healthcare processes. Selecting the most suitable technologies is important to ensure data validity. A case study of the hospital cleaning process at a public Danish hospital...... was conducted. Monitoring tasks and ascertaining quality of work is difficult in such a process. Based on principal-agent theory, a set of decision indicator has been developed, and a decision framework for assessing technologies to enable performance measurement has been proposed....

  13. Reflections on Students’ Projects with Motion Sensor Technologies in a Problem-Based Learning Environment

    DEFF Research Database (Denmark)

    Triantafyllou, Eva; Timcenko, Olga; Triantafyllidis, George

    2014-01-01

    Game-based learning (GBL) has been applied in many fields to enhance learning motivations. In recent years, motion sensor technologies have been also introduced in GBL with the aim of using active, physical modalities to facilitate the learning process, while fostering social development...... and collaboration (when these activities involve more than one student at a time). The approaches described in literature, which used motion sensors in GBL, cover a broad spectrum of educational fields. These approaches investigated the effect of learning games using motion sensors on the development of specific...... skills or on the learning experience. This paper presents our experiences on the educational use of motion sensor technologies. Our research was conducted at the department of Medialogy in Aalborg University Copenhagen. Aalborg University applies a problem-based, project-organized model of teaching...

  14. Problems of Technology of Energy-Saving Buildings and Their Impact on Energy Efficiency in Buildings

    Science.gov (United States)

    Kwasnowski, Pawel; Fedorczak-Cisak, Malgorzata; Knap, Katarzyna

    2017-10-01

    Introduction of EPBD in legislation of the EU member states caused that buildings must meet very stringent requirements of thermal protection and energy efficiency. On the basis of EPBD provisions, EU Member States introduce standard of NZEB (Nearly Zero-Energy Buildings). Such activities cause a need for new, innovative materials and technologies, and new approaches to design, construction and retrofitting of buildings. Indispensable is the precise coordination of the design of structure and technical installations of building, which may be provided in an integrated design process in the system BIM. Good coordination and cooperation of all contractors during the construction phase is also necessary. The article presents the problems and the new methodology for the design, construction and use of energy efficient buildings in terms of energy saving technologies, including discussion of the significant impact of the automation of technical installations on the building energy efficiency.

  15. Demonstration of robust micromachined jet technology and its application to realistic flow control problems

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Sung Pil [Inha University, Incheon (Korea, Republic of)

    2006-04-15

    This paper describes the demonstration of successful fabrication and initial characterization of micromachined pressure sensors and micromachined jets (microjets) fabricated for use in macro flow control and other applications. In this work, the microfabrication technology was investigated to create a micromachined fluidic control system with a goal of application in practical fluids problems, such as UAV (Unmanned Aerial Vehicle)-scale aerodynamic control. Approaches of this work include : (1) the development of suitable micromachined synthetic jets (microjets) as actuators, which obviate the need to physically extend micromachined structures into an external flow ; and (2) a non-silicon alternative micromachining fabrication technology based on metallic substrates and lamination (in addition to traditional MEMS technologies) which will allow the realization of larger scale, more robust structures and larger array active areas for fluidic systems. As an initial study, an array of MEMS pressure sensors and an array of MEMS modulators for orifice-based control of microjets have been fabricated, and characterized. Both pressure sensors and modulators have been built using stainless steel as a substrate and a combination of lamination and traditional micromachining processes as fabrication technologies.

  16. Demonstration of robust micromachined jet technology and its application to realistic flow control problems

    International Nuclear Information System (INIS)

    Chang, Sung Pil

    2006-01-01

    This paper describes the demonstration of successful fabrication and initial characterization of micromachined pressure sensors and micromachined jets (microjets) fabricated for use in macro flow control and other applications. In this work, the microfabrication technology was investigated to create a micromachined fluidic control system with a goal of application in practical fluids problems, such as UAV (Unmanned Aerial Vehicle)-scale aerodynamic control. Approaches of this work include : (1) the development of suitable micromachined synthetic jets (microjets) as actuators, which obviate the need to physically extend micromachined structures into an external flow ; and (2) a non-silicon alternative micromachining fabrication technology based on metallic substrates and lamination (in addition to traditional MEMS technologies) which will allow the realization of larger scale, more robust structures and larger array active areas for fluidic systems. As an initial study, an array of MEMS pressure sensors and an array of MEMS modulators for orifice-based control of microjets have been fabricated, and characterized. Both pressure sensors and modulators have been built using stainless steel as a substrate and a combination of lamination and traditional micromachining processes as fabrication technologies

  17. SUPPLIER SELECTION STRATEGY AND MANUFACTURING FLEXIBILITY: IMPACT OF QUALITY AND TECHNOLOGY ROADMAPS

    Directory of Open Access Journals (Sweden)

    Muhamad Jantan

    2006-01-01

    Full Text Available The study evaluates the relationship between technology, quality, cost and delivery performance-based, supplier selection strategies, and manufacturing flexibilities namely, product flexibility, launch flexibility, and volume flexibility. Moreover, the moderating impact of supplier management strategies, namely quality roadmap and technology roadmap on the above relationships were also explored. The data for the study was drawn from a sample of companies listed in the factory directory published by the Penang Development Corporation (PDC. A postal survey of 120 manufacturers provided a return of 92 usable responses. The results reveal that the selection of suppliers based on technological and quality performance positively affects all the three dimensions of manufacturing flexibility, with complementary effects of good technology and quality roadmaps. Technology and quality roadmaps act as predictors for product and volume flexibilities. However, when launch flexibility is the focus, both technology and quality roadmaps moderate the impact of supplier selection strategies. Details of the findings, theoretical and practical implications, and the research limitation are discussed.

  18. Problematic Technology Use in a clinical sample of children and adolescents. Personality and behavioral problems associated.

    Science.gov (United States)

    Alonso, Cristina; Romero, Estrella

    2017-03-01

    In parallel to the rapid growth of access to new technologies (NT) there has been an increase in the problematic use of the same, especially among children and adolescents. Although research in this field is increasing, the studies have mainly been developed in the community, and the characteristics associated with the problematic use of NT are unknown in samples that require clinical care. Therefore, the aim of this study is to analyze the relationship between problematic use of video games (UPV) and Internet (UPI) and personality traits and behavior problems in a clinical sample of children and adolescents. The sample consists of 88 patients who were examined in the clinical psychology consultation in the Mental Health Unit for Children and Adolescents of the University Hospital of Santiago de Compostela. Data were obtained from self-reports and rating scales filled out by parents. 31.8% of the participants present UPI and 18.2%, UPV. The children and adolescents with UPNT have lower levels of Openness to experience, Conscientiousness and Agreeableness and higher levels of Emotional instability, global Impulsivity and Externalizing behavior problems, as well as Attention and Thought problems. UPNT is a problem that emerges as an important issue in clinical care for children and adolescents, so its study in child and youth care units is needed. Understanding the psychopathological profile of children and adolescents with UPNT will allow for the development of differential and more specific interventions.

  19. PEOPLE RETRIEVAL BY MEANS OF COMPOSITE PICTURES: PROBLEM STATE-OF-THE-ART AND TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Georgy A. Kukharev

    2014-11-01

    Full Text Available We discuss the problem of people retrieval by means of composite pictures constructed according to descriptive portrait. An overview of the problem state-of-the-art is provided beginning from the basic concepts and terminology to a modern technology for composite picture creation, real-world scenarios and search results. The development history of systems for forming composite portraits (photo robots and sketches and the ideas implemented in these systems are provided. The problem of automatic comparison of composite pictures with the original ones is discussed, and the reasons for unattainability of stable retrieval of originals by a composite picture in real-world scenarios are revealed. Requirements to composite pictures databases in addition to the existing benchmark databases of facial images and also methods for implementation of such databases are formulated. Approaches for generation of sketches population from an initial one that increase effectiveness of identikit-based photo image retrieval systems are proposed. The method of similarity index increasing in the couple identikit-photograph based on computation of an average identikit from the created population is provided. It is shown that such composite pictures are more similar to original portraits and their use in the discussed search problem can lead to good results. Thus the created identikits meet the requirements of the truthful scenario as take into account the possibility of incomplete information in descriptions. Results of experiments on CUHK Face Sketch and CUHK Face Sketch FERET databases and also open access identikits and corresponding photos are discussed.

  20. Source selection problem of competitive power plants under government intervention: a game theory approach

    Science.gov (United States)

    Mahmoudi, Reza; Hafezalkotob, Ashkan; Makui, Ahmad

    2014-06-01

    Pollution and environmental protection in the present century are extremely significant global problems. Power plants as the largest pollution emitting industry have been the cause of a great deal of scientific researches. The fuel or source type used to generate electricity by the power plants plays an important role in the amount of pollution produced. Governments should take visible actions to promote green fuel. These actions are often called the governmental financial interventions that include legislations such as green subsidiaries and taxes. In this paper, by considering the government role in the competition of two power plants, we propose a game theoretical model that will help the government to determine the optimal taxes and subsidies. The numerical examples demonstrate how government could intervene in a competitive market of electricity to achieve the environmental objectives and how power plants maximize their utilities in each energy source. The results also reveal that the government's taxes and subsidiaries effectively influence the selected fuel types of power plants in the competitive market.

  1. A Selection Approach for Optimized Problem-Solving Process by Grey Relational Utility Model and Multicriteria Decision Analysis

    Directory of Open Access Journals (Sweden)

    Chih-Kun Ke

    2012-01-01

    Full Text Available In business enterprises, especially the manufacturing industry, various problem situations may occur during the production process. A situation denotes an evaluation point to determine the status of a production process. A problem may occur if there is a discrepancy between the actual situation and the desired one. Thus, a problem-solving process is often initiated to achieve the desired situation. In the process, how to determine an action need to be taken to resolve the situation becomes an important issue. Therefore, this work uses a selection approach for optimized problem-solving process to assist workers in taking a reasonable action. A grey relational utility model and a multicriteria decision analysis are used to determine the optimal selection order of candidate actions. The selection order is presented to the worker as an adaptive recommended solution. The worker chooses a reasonable problem-solving action based on the selection order. This work uses a high-tech company’s knowledge base log as the analysis data. Experimental results demonstrate that the proposed selection approach is effective.

  2. SELECTION OF KURAU FISHING TECHNOLOGY UNITS Eleutheronema tetradactylum WHICH COMPETITIVE AND SUSTAINABLE

    Directory of Open Access Journals (Sweden)

    Muhammad Natsir Kholis

    2018-01-01

    Full Text Available Environmentally friendly fishing technology unit is needed in sustainable fisheries management. The purpose of this study was to determine the fishing technology unit of kurau competitive and sustainable. Data collection was carried out from July to September 2016 in the Coastal Pambang of Bengkalis District of Riau Province, by using the survey method. The analytical data method used is scoring the biological, technical and socioeconomic aspects the fishing technology unit of kurau. Results of research show that combined analysis of biological, technical and socioeconomic aspects have the value of the VA fishing line function (2.48 is higher than the other three fishing gear. Thus, the fishing line is a selected fishing technology unit of kurau competitive and sustainable in the Coastal Pambang Bengkalis District. Keywords: competitive,coastal pambang, fishing technology, kurau fish,sustainable fishing

  3. Automation and adaptation: Nurses’ problem-solving behavior following the implementation of bar coded medication administration technology

    Science.gov (United States)

    Holden, Richard J.; Rivera-Rodriguez, A. Joy; Faye, Héléne; Scanlon, Matthew C.; Karsh, Ben-Tzion

    2012-01-01

    The most common change facing nurses today is new technology, particularly bar coded medication administration technology (BCMA). However, there is a dearth of knowledge on how BCMA alters nursing work. This study investigated how BCMA technology affected nursing work, particularly nurses’ operational problem-solving behavior. Cognitive systems engineering observations and interviews were conducted after the implementation of BCMA in three nursing units of a freestanding pediatric hospital. Problem-solving behavior, associated problems, and goals, were specifically defined and extracted from observed episodes of care. Three broad themes regarding BCMA’s impact on problem solving were identified. First, BCMA allowed nurses to invent new problem-solving behavior to deal with pre-existing problems. Second, BCMA made it difficult or impossible to apply some problem-solving behaviors that were commonly used pre-BCMA, often requiring nurses to use potentially risky workarounds to achieve their goals. Third, BCMA created new problems that nurses were either able to solve using familiar or novel problem-solving behaviors, or unable to solve effectively. Results from this study shed light on hidden hazards and suggest three critical design needs: (1) ecologically valid design; (2) anticipatory control; and (3) basic usability. Principled studies of the actual nature of clinicians’ work, including problem solving, are necessary to uncover hidden hazards and to inform health information technology design and redesign. PMID:24443642

  4. Selection of innovative technologies for the remediation of soils contaminated with radioactive and mixed wastes

    International Nuclear Information System (INIS)

    Steude, J.; Tucker, B.

    1991-01-01

    The remediation of sites containing radioactive and mixed wastes is in a period of rapid growth. The state of the art of remediation is progressing to handle the shortcomings of conventional pump and treat or disposal technologies. The objective of this paper is to review the status of selected innovative technologies which treat soils contaminated with radioactive and mixed waste. Technologies are generally classified as innovative if they are fully developed, but lack sufficient cost or performance data for comparison with conventional technologies. The Environmental Protection Agency recommends inclusion of innovative technologies in the RI/FS screening process if there is reason to believe that they would offer advantages in performance, implementability, cost, etc. This paper serves as a compilation of the pertinent information necessary to gain an overview of the selected innovative technologies to aid in the RI/F'S screening process. The innovative technologies selected for evaluation are listed below. Bioremediation, although innovative, was not included due to the combination of the vast amount of literature on this subject and the limited scope of this project. 1. Soil washing and flushing; 2. Low temperature thermal treatment; 3. Electrokinetics; 4. Infrared incineration; 5. Ultrasound; 6. In situ vitrification; 7. Soil vapor extraction; 8. Plasma torch slagging; 9. In situ hot air/steam extraction; 10. Cyclone reactor treatment; 11. In situ radio frequency; 12. Vegetative radionuclide uptake; and 13. In situ soil heating. The information provided on each technology includes a technical description, status, summary of results including types of contaminants and soils treated, technical effectiveness, feasibility and estimated cost

  5. Beyond Science and Technology: The need to incorporate Environmental Ethics to solve Environmental Problems

    Directory of Open Access Journals (Sweden)

    Fesseha Mulu

    2018-01-01

    Full Text Available The emergence and development of science and technology has been critical in improving the lives of mankind. It helps mankind to cope with a number of manmade and natural challenges and disasters. Science cannot totally diminish the level of human dependency on nature; but, with the existing availability of natural resources, science has increased our productivity. However, science and technology can also have its own negative impacts on the natural environment. For the purpose of increasing productivity and satisfying human needs, humans have been egoistically exploiting nature but disregarding the effects of their activities on nature. Science has also been trying its level best to mitigate the negative effects that results from mankind’s exploitation of nature. However, science alone is incapable of solving all environmental problems. This desk research employs secondary sources of data, and argues that environmental ethics should come to the fore in order to address the gap left by science with regard to resolving environmental problems that mankind faces today.

  6. Quo vadis radiotherapy? Technological advances and the rising problems in cancer management.

    Science.gov (United States)

    Allen, Barry J; Bezak, Eva; Marcu, Loredana G

    2013-01-01

    Despite the latest technological advances in radiotherapy, cancer control is still challenging for several tumour sites. The survival rates for the most deadly cancers, such as ovarian and pancreatic, have not changed over the last decades. The solution to the problem lies in the change of focus: from local treatment to systemic therapy. The aim of this paper is to present the current status as well as the gaps in radiotherapy and, at the same time, to look into potential solutions to improve cancer control and survival. The currently available advanced radiotherapy treatment techniques have been analysed and their cost-effectiveness discussed. The problem of systemic disease management was specifically targeted. Clinical studies show limited benefit in cancer control from hadron therapy. However, targeted therapies together with molecular imaging could improve treatment outcome for several tumour sites while controlling the systemic disease. The advances in photon therapy continue to be competitive with the much more expensive hadron therapy. To justify the cost effectiveness of proton/heavy ion therapy, there is a need for phase III randomised clinical trials. Furthermore, the success of systemic disease management lies in the fusion between radiation oncology technology and microbiology.

  7. Selection of Server-Side Technologies for an E-Business Curriculum

    Science.gov (United States)

    Sandvig, J. Christopher

    2007-01-01

    The rapid growth of e-business and e-commerce has made server-side programming an increasingly important topic in information systems (IS) and computer science (CS) curricula. This article presents an overview of the major features of several popular server-side programming technologies and discusses the factors that influence the selection of…

  8. Evaluation and selection of aqueous-based technology for partitioning radionuclides from ICPP calcine

    International Nuclear Information System (INIS)

    Olson, A.L.; Schulz, W.W.; Burchfield, L.A.; Carlson, C.D.; Swanson, J.L.; Thompson, M.C.

    1993-02-01

    Early in 1993 Westinghouse Idaho Nuclear Company (WINCO) chartered a Panel of Nuclear Separations Experts. The purpose of this Panel was to assist WINCO scientists and engineers in selecting, evaluating, and ranking candidate aqueous-based processes and technologies for potential use in partitioning selected radionuclides from nitric acid solutions of retrieved Idaho Chemical Processing Plant (ICPP) calcine. Radionuclides of interest are all transuranium elements, 90 Sr, 99 Tc, 129 I, and 137 Cs. The six man Panel met for 4 days (February 16--19, 1993) on the campus of the Idaho State University in Pocatello, Idaho. Principal topics addressed included: Available radionuclide removal technology; applicability of separations technology and processes to ICPP calcine; and potential integrated radionuclide partitioning schemes. This report, prepared from contributions from all Panel members, presents a comprehensive account of the proceedings and significant findings of the February, 1993 meeting in Pocatello

  9. [Problems of cardiovascular toxicity of coxibs and non-selective NSA].

    Science.gov (United States)

    Forejtová, S

    2006-01-01

    Non-steroidal antirheumatics (NSA) belong to the most often prescribed drugs. Certain observation studies indicate that they are used by 20 to 30% of population of developed countries. The most common NSA's adverse effects are gastrointestinal complications. Coxibs have been developed as an alternative to conventional non-selective NSA; with similar efficacy, they should reduce the risk of development of gastrointestinal complications. In the few last years, possible toxicity of coxibs and other non-steroidal antirheumatics has been widely discussed. The VIGOR study, which was performed 6 years ago, showed five times higher incidence of nonfatal myocardial infarction in patients with rofecoxib therapy as compared with naproxen. Afterwards, there was much debate about rofecoxib, and coxibs in general, whose cardiotoxicity was supported and confuted at the same time. Possible cardioprotective effect of naproxen was discussed too. Later on, results of the APPROVE study (Adenoma Polyp Prevention on Vioxx) made Merck & Co., Inc. withdraw rofecoxib from all markets voluntarily. In the end of 2004, three controversial studies on celecoxib were published. Although the first study (Adenoma Prevention with Celecoxib study, APC) showed higher cardiovascular risk of celecoxib, the second study (Prevention of Adenomatosus Polyps, PreSAP) did not verify these results. Surprisingly, the third study (Alzheimer Disease and Prevention Trial, ADAPT) proved 50% increase of the risk of cardiovascular (CV) toxicity of naproxen. In the last year, researchers have tried to decide whether CV toxicity is a class effect of coxib group or a class effect of all NSA. Many observation studies proved higher CV risk both of coxibs (particularly rofecoxib) and non-selective NSA including naproxen. These new findings moved the American FDA (Food and Drug Administration) to publish guidance concerning higher CV risk of all coxibs and NSA. For the time being, the EMEA (European Agency for Evaluation

  10. Comparative analyses for selected clean coal technologies in the international marketplace

    Energy Technology Data Exchange (ETDEWEB)

    Szpunar, C.B.; Gillette, J.L.

    1990-07-01

    Clean coal technologies (CCTs) are being demonstrated in research and development programs under public and private sponsorship. Many of these technologies could be marketed internationally. To explore the scope of these international opportunities and to match particular technologies with markets appearing to have high potential, a study was undertaken that focused on seven representative countries: Italy, Japan, Morocco, Turkey, Pakistan, the Peoples' Republic of China, and Poland. The results suggest that there are international markets for CCTs and that these technologies can be cost competitive with more conventional alternatives. The identified markets include construction of new plants and refurbishment of existing ones, especially when decision makers want to decrease dependence on imported oil. This report describes potential international market niches for U.S. CCTs and discusses the status and implications of ongoing CCT demonstration activities. Twelve technologies were selected as representative of technologies under development for use in new or refurbished industrial or electric utility applications. Included are the following: Two generic precombustion technologies: two-stage froth-flotation coal beneficiation and coal-water mixtures (CWMs); Four combustion technologies: slagging combustors, integrated-gasification combined-cycle (IGCC) systems, atmospheric fluidized-bed combustors (AFBCs), and pressurized fluidized-bed combustors (PFBCs); and Six postcombustion technologies: limestone-injection multistage burner (LIMB) systems, gas-reburning sorbent-injection (GRSI) systems, dual-alkali flue-gas desulfurization (FGD), spray-dryer FGD, the NOXSO process, and selective catalytic reduction (SCR) systems. Major chapters of this report have been processed separately for inclusion on the data base.

  11. VET workers’ problem-solving skills in technology-rich environments: European approach

    Directory of Open Access Journals (Sweden)

    Raija Hämäläinen

    2014-08-01

    Full Text Available The European workplace is challenging VET adults’ problem-solving skills in technology-rich environments (TREs. So far, no international large-scale assessment data has been available for VET. The PIAAC data comprise the most comprehensive source of information on adults’ skills to date. The present study (N=50 369 focuses on gaining insight into the problem-solving skills in TREs of adults with a VET background. When examining the similarities and differences in VET adults’ problem-solving skills in TREs across 11 European countries, two main trends can be observed. First, our results show that only a minority of VET adults perform at a high level. Second, there seems to be substantial variation between countries with respect to the proportion of VET adults that can be identified as “at-risk” or “weak” performers. For the future, our findings indicate the variations that can be used as a starting point to identify beneficial VET approaches.

  12. Instructional Designers' Media Selection Practices for Distributed Problem-Based Learning Environments

    Science.gov (United States)

    Fells, Stephanie

    2012-01-01

    The design of online or distributed problem-based learning (dPBL) is a nascent, complex design problem. Instructional designers are challenged to effectively unite the constructivist principles of problem-based learning (PBL) with appropriate media in order to create quality dPBL environments. While computer-mediated communication (CMC) tools and…

  13. The impact of feedstock cost on technology selection and optimum size

    International Nuclear Information System (INIS)

    Cameron, Jay B.; Kumar, Amit; Flynn, Peter C.

    2007-01-01

    Development of biomass projects at optimum size and technology enhances the role that biomass can make in mitigating greenhouse gas. Optimum sized plants can be built when biomass resources are sufficient to meet feedstock demand; examples include wood and forest harvest residues from extensive forests, and grain straw and corn stover from large agricultural regions. The impact of feedstock cost on technology selection is evaluated by comparing the cost of power from the gasification and direct combustion of boreal forest wood chips. Optimum size is a function of plant cost and the distance variable cost (DVC, $ dry tonne -1 km -1 ) of the biomass fuel; distance fixed costs (DFC, $ dry tonne -1 ) such as acquisition, harvesting, loading and unloading do not impact optimum size. At low values of DVC and DFC, as occur with wood chips sourced from the boreal forest, direct combustion has a lower power cost than gasification. At higher values of DVC and DFC, gasification has a lower power cost than direct combustion. This crossover in most economic technology will always arise when a more efficient technology with a higher capital cost per unit of output is compared to a less efficient technology with a lower capital cost per unit of output. In such cases technology selection cannot be separated from an analysis of feedstock cost

  14. Technical and economic evaluation of selected technologies of the Landfill Characterization System

    Energy Technology Data Exchange (ETDEWEB)

    Floran, R.J.

    1993-12-31

    In 1992 and 1993, numerous innovative and emerging technologies for characterizing metal and mixed waste contaminants and their migration beneath landfills in and environments were field tested at Sandia`s Chemical Waste Landfill. Many of these technologies are being evaluated as part of the Landfill Characterization System (LCS). The LCS emphasizes minimally intrusive technologies and downhole sensors that strive to be cheaper, better, safer and faster than conventional methods. Major aims of the LCS are to demonstrate, test and evaluate these technologies, and determine whether substantial cost saving over traditional baseline methods can be realized. To achieve these goals, the LCS uses an integrated systems approach that stresses the application of complementary and compatible technologies. Successful field demonstrations combined with favorable economics, will greatly assist the commercialization of these technologies to the private sector and to Environmental Restoration groups throughout the DOE Complex. In this paper, a technical and economic evaluation of selected technologies that comprise the LCS is presented. Because sampling and analysis is the most costly part of a characterization effort, the economic evaluation presented here focuses specifically on these activities. LCS technologies discussed include the ``Smart Sampling Methodology`` and two field screening analytical methods, stripping voltammetry and x-ray fluorescence.

  15. Project selection problem under uncertainty: An application of utility theory and chance constrained programming to a real case

    Directory of Open Access Journals (Sweden)

    Reza Hosnavi Atashgah

    2013-06-01

    Full Text Available Selecting from a pool of interdependent projects under certainty, when faced with resource constraints, has been studied well in the literature of project selection problem. After briefly reviewing and discussing popular modeling approaches for dealing with uncertainty, this paper proposes an approach based on chance constrained programming and utility theory for a certain range of problems and under some practical assumptions. Expected Utility Programming, as the proposed modeling approach, will be compared with other well-known methods and its meaningfulness and usefulness will be illustrated via two numerical examples and one real case.

  16. Pilot study risk assessment for selected problems at the Nevada Test Site (NTS)

    International Nuclear Information System (INIS)

    Daniels, J.I.; Andricevic, R.; Jacobson, R.L.

    1993-06-01

    The Nevada Test Site (NTS) is located in southwestern Nevada, about 105 km (65 mi) northwest of the city of Las Vegas. A series of tests was conducted in the late 1950s and early 1960s at or near the NTS to study issues involving plutonium-bearing devices. These tests resulted in the dispersal of about 5 TBq of 239,24O Pu on the surficial soils at the test locations. Additionally, underground tests of nuclear weapons devices have been conducted at the NTS since late 1962; ground water beneath the NTS has been contaminated with radionuclides produced by these tests. These two important problems have been selected for assessment. Regarding the plutonium contamination, because the residual 239 Pu decays slowly (half-life of 24,110 y), these sites could represent a long-term hazard if they are not remediated and if institutional controls are lost. To investigate the magnitude of the potential health risks for this no-remediation case, three basic exposure scenarios were defined that could bring individuals in contact with 239,24O Pu at the sites: (1) a resident living in a subdivision, (2) a resident farmer, and (3) a worker at a commercial facility -- all located at a test site. The predicted cancer risks for the resident farmer were more than a factor of three times higher than the suburban resident at the median risk level, and about a factor of ten greater than the reference worker at a commercial facility. At 100 y from the present, the 5, 50, and 95th percentile risks for the resident farmer at the most contaminated site were 4 x 10 -6 , 6 x 10 -5 , and 5 x 10 -4 , respectively. For the assessment of Pu in surface soil, the principal sources of uncertainty in the estimated risks were population mobility, the relationship between indoor and outdoor contaminant levels, and the dose and risk factors for bone, liver, and lung

  17. Selected Problems of Determining the Course of Railway Routes by Use of GPS Network Solution

    Science.gov (United States)

    Koc, Władysław; Specht, Cezary

    2011-09-01

    The main problem related to railroad surveying design and its maintenance is the necessity to operate in local geodetic reference systems caused by the long rail sections with straight lines and curvatures of the running edge. Due to that reason the geodetic railroad classical surveying methods requires to divide all track for a short measurement section and that caused additional errors. Development of the Global Navigational Satellite Systems (GNSS) positioning methods operating in the standardized World Geodetic System (WGS-84) allowed verification of capability of utilization GPS measurements for railroad surveying. It can be stated that implemented satellite measurement techniques opens a whole new perspective on applied research and enables very precise determination of data for railway line determining, modernization and design. The research works focused on implementation GNSS multi-receivers measurement positioning platform for projecting and stock-taking working based on polish active geodesic network ASG-EUPOS, as a reference frame. In order to eliminate the influence of random measurement errors and to obtain the coordinates representing the actual shape of the track few campaigns were realized in 2009 and 2010. Leica GPS Total station system 1200 SmartRover (with ATX1230 GG antennas) receivers were located in the diameter of the measurement platform. Polish Active Geodetic Network ASG-EUPOS was used as a reference network transmitted Real Time Kinematic Positioning Service according to RTCM 3.1 standard. Optimum time period were selected for GNSS campaign and testing area was chosen without large obstructions. The article presents some surveying results of the measurement campaigns and also discusses the accuracy of the course determination. Analyzes and implementation of results in railroad design process are also discussed.

  18. The impacts of the St. Patrick's Day superstorm on selected technologies

    Science.gov (United States)

    Carter, B. A.; Yizengaw, E.; Lin, C. S.; Pradipta, R.; Norman, R.; Tseng, T.; Bennett, J.; Bishop, R. L.; Weygand, J. M.; Francis, M.; Terkildsen, M. B.; Groves, K. M.; Caton, R. G.; Tripathi, N.; Zhang, K.

    2015-12-01

    In the past, significant research efforts have been directed towards understanding how severe geomagnetic storms affect the near-Earth space environment. From this research, we have learned that many technologies are affected by these severe space weather events. The 2015 St. Patrick's Day geomagnetic storm has provided a great opportunity to analyze three selected space weather phenomena that adversely impact modern technologies; (1) Geomagnetically Induced Currents (GICs), (2) increased thermospheric mass density, and (3) the occurrence of Equatorial Plasma Bubbles (EPBs). The serious effects of GICs on power grids in the high-latitude regions is well known. Recent research has indicated that the equatorial region is also susceptible to increased GIC activity due to the equatorial electrojet. Thus, an examination of the equatorial magnetometer data during the St. Patrick's Day storm will be presented. It is also well understood that during geomagnetic storms, the thermospheric mass density at a given altitude increases due to the increase in Joule heating in the high-latitude regions. As a consequence of this, low-Earth orbiting satellites and space debris experience increased atmospheric drag. Changes in atmospheric drag causes orbits to be perturbed, resulting in less accurate orbit predictions. An investigation of the orbits of several low-Earth orbiting satellites will be presented and discussed in the context of collision avoidance, as part of the ongoing space debris problem. Finally, Equatorial Plasma Bubbles (EPBs) are a common phenomenon in the nighttime low-latitude ionosphere. EPBs are known to cause random fluctuations (i.e., scintillations) in the amplitude and phase of trans-ionospheric radio signals. While EPBs have been reported during both geomagnetically quiet and disturbed periods, research clearly indicates that the occurrence of EPBs is dependent on the geomagnetic activity level. The occurrence of EPBs around the world will be presented

  19. Older adults' motivated choice for technological innovation: evidence for benefit-driven selectivity.

    Science.gov (United States)

    Melenhorst, Anne-Sophie; Rogers, Wendy A; Bouwhuis, Don G

    2006-03-01

    This study examined older adults' motivation to adopt technological innovation. Sixty-eight older e-mail users and nonusers discussed the use of e-mail and of traditional communication methods in 18 focus groups. The results show older adults' benefit-driven approach to new communication technology. Regardless of whether their decision about the new technology was positive or negative and irrespective of their e-mail experience, participants focused on benefits rather than costs. For traditional media, both costs and benefits were important. Results contradict the common belief that barriers such as usability problems determine whether older people use new technology and indicate the decisive role of perceived benefits for successful innovation. ((c) 2006 APA, all rights reserved).

  20. On the selection of financing instruments to push the development of new technologies: Application to clean energy technologies

    International Nuclear Information System (INIS)

    Olmos, Luis; Ruester, Sophia; Liong, Siok-Jen

    2012-01-01

    Achieving climate policy goals requires mobilizing public funds to bring still immature clean technologies to competitiveness and create new technological options. The format of direct public support must be tailored to the characteristics of technologies addressed. Based on the experience accumulated with innovation programs, we have identified those features of innovation that should directly condition the choice of direct support instruments. These include the funding gap between the cost of innovation activities and the amount of private funds leveraged; the ability of technologies targeted to compete for public funds in the market; the probability that these technologies fail to reach the market; and the type of entity best suited to conduct these activities. Clean innovation features are matched to those of direct support instruments to provide recommendations on the use to be made of each type of instrument. Given the large financing gap of most clean energy innovation projects, public grants and contracts should finance a large part of clean pre-deployment innovation. However, public loans, equity investments, prizes and tax credits or rebates can successfully support certain innovation processes at a lower public cost. Principles derived are applied to identify the instrument best suited to a case example. - Highlights: ► Public financing instruments must be tailored to the features of supported innovation. ► Instruments should trigger desired innovation at the lowest public cost possible. ► They should strike the right balance between technology selection and competition. ► Public funds mobilized through them should reach the innovating entity. ► Public loans, equity investments, prizes, and rebates should be used in specific cases.

  1. Including Children with Selective Mutism in Mainstream Schools and Kindergartens: Problems and Possibilities

    Science.gov (United States)

    Omdal, Heidi

    2008-01-01

    There is little research on inclusion of children with selective mutism in school/kindergarten. Moreover, few studies have tried to understand selectively mute children's interactions in the natural surroundings of their home and school/kindergarten. Five children meeting the DSM-IV criteria for selective mutism were video-observed in social…

  2. Overview of selected surrogate technologies for high-temporal resolution suspended-sediment monitoring

    Science.gov (United States)

    Gray, John R.; Gartner, Jeffrey W.

    2010-01-01

    Traditional methods for characterizing selected properties of suspended sediments in rivers are being augmented and in some cases replaced by cost-effective surrogate instruments and methods that produce a temporally dense time series of quantifiably accurate data for use primarily in sediment-flux computations. Turbidity is the most common such surrogate technology, and the first to be sanctioned by the U.S. Geological Survey for use in producing data used in concert with water-discharge data to compute sediment concentrations and fluxes for storage in the National Water Information System. Other technologies, including laser-diffraction, digital photo-optic, acoustic-attenuation and backscatter, and pressure-difference techniques are being evaluated for producing reliable sediment concentration and, in some cases, particle-size distribution data. Each technology addresses a niche for sediment monitoring. Their performances range from compelling to disappointing. Some of these technologies have the potential to revolutionize fluvial-sediment data collection, analysis, and availability.

  3. An Analysis of the Network Selection Problem for Heterogeneous Environments with User-Operator Joint Satisfaction and Multi-RAT Transmission

    Directory of Open Access Journals (Sweden)

    J. J. Escudero-Garzás

    2017-01-01

    Full Text Available The trend in wireless networks is that several wireless radio access technologies (RATs coexist in the same area, forming heterogeneous networks in which the users may connect to any of the available RATs. The problem of associating a user to the most suitable RAT, known as network selection problem (NSP, is of capital importance for the satisfaction of the users in these emerging environments. However, also the satisfaction of the operator is important in this scenario. In this work, we propose that a connection may be served by more than one RAT by using multi-RAT terminals. We formulate the NSP with multiple RAT association based on utility functions that take into consideration both user’s satisfaction and provider’s satisfaction. As users are characterized according to their expected quality of service, our results exhaustively analyze the influence of the user’s profile, along with the network topology and the type of applications served.

  4. Discovery of Potent and Selective Inhibitors for ADAMTS-4 through DNA-Encoded Library Technology (ELT).

    Science.gov (United States)

    Ding, Yun; O'Keefe, Heather; DeLorey, Jennifer L; Israel, David I; Messer, Jeffrey A; Chiu, Cynthia H; Skinner, Steven R; Matico, Rosalie E; Murray-Thompson, Monique F; Li, Fan; Clark, Matthew A; Cuozzo, John W; Arico-Muendel, Christopher; Morgan, Barry A

    2015-08-13

    The aggrecan degrading metalloprotease ADAMTS-4 has been identified as a novel therapeutic target for osteoarthritis. Here, we use DNA-encoded Library Technology (ELT) to identify novel ADAMTS-4 inhibitors from a DNA-encoded triazine library by affinity selection. Structure-activity relationship studies based on the selection information led to the identification of potent and highly selective inhibitors. For example, 4-(((4-(6,7-dimethoxy-3,4-dihydroisoquinolin-2(1H)-yl)-6-(((4-methylpiperazin-1-yl)methyl)amino)-1,3,5-triazin-2-yl)amino)methyl)-N-ethyl-N-(m-tolyl)benzamide has IC50 of 10 nM against ADAMTS-4, with >1000-fold selectivity over ADAMT-5, MMP-13, TACE, and ADAMTS-13. These inhibitors have no obvious zinc ligand functionality.

  5. The transition of new technology to solve today`s problems

    Energy Technology Data Exchange (ETDEWEB)

    Kamin, R.A. [Naval Air Warfare Center, Trenton, NJ (United States); Martin, C.J.; Turner, L.M. [Defense Fuel Supply Center, Alexandria, VA (United States)

    1995-05-01

    Extensive research has been conducted in the development of methods to predict the degradation of F-44 in storage. The Low Pressure Reactor (LPR) has greatly enhanced the stability prediction capabilities necessary to make informed decisions concerning aviation fuel in storage. This technique has in the past been primarily used for research purposes. The Naval Air Warfare Center, Aircraft Division, Trenton, NJ, has used this technique successfully to assist the Defense Fuel Supply Center, Cameron Station, Alexandria, VA, in stability assessments of F-44. The High Performance Liquid Chromatography/Electrochemical Detector (HPLC/EC) antioxidant determination technique has also aided in making stability predictions by establishing the amount of inhibitor currently in the product. This paper will address two case studies in which the above new technology was used to insure the rapid detection and diagnosis of today`s field and logistic problems.

  6. Selection of Sustainable Technology for VOC Abatement in an Industry: An Integrated AHP-QFD Approach

    Science.gov (United States)

    Gupta, Alok Kumar; Modi, Bharat A.

    2018-04-01

    Volatile organic compounds (VOCs) are universally present in global atmospheric pollutants. These VOCs are responsible for photo chemical reaction in atmosphere leading to serious harmful effects on human health and environment. VOCs are produced from both natural and man-made sources and may have good commercial value if it can be utilized as alternate fuel. As per data from US EPA, 15% of total VOC emissions are generated from surface coating industry but VOC concentration and exhaust air volume varies to a great extent and is dependent on processes used by industry. Various technologies are available for abatement of VOCs. Physical, Chemical and Biological technologies are available to remove VOCs by either recovery or destruction with many advantages and limitations. With growing environmental awareness and considering the resource limitations of medium and small scale industries, requirement of a tool for selecting appropriate techno economically viable solution for removal of VOCs from industrial process exhaust is envisaged. The aim of the present study is to provide management a tool to determine the overall effect of implementation of VOC abatement technology on business performance and VOC emissions. The primary purpose of this work is to outline a methodology to rate various VOC abatement technologies with respect to the constraint of meeting current and foreseeable future regulatory requirements, operational flexibility and Over All Economics Parameters considering conservation of energy. In this paper an integrated approach has been proposed to select most appropriate abatement technology strategically. Analytical hierarchy process and Quality function deployment have been integrated for Techno-commercial evaluation. A case study on selection of VOC abatement technology for a leading aluminium foil surface coating, lamination and printing facility using this methodology is presented in this study.

  7. Miniaturized, Planar Ion-selective Electrodes Fabricated by Means of Thick-film Technology

    Directory of Open Access Journals (Sweden)

    Robert Koncki

    2006-04-01

    Full Text Available Various planar technologies are employed for developing solid-state sensorshaving low cost, small size and high reproducibility; thin- and thick-film technologies aremost suitable for such productions. Screen-printing is especially suitable due to itssimplicity, low-cost, high reproducibility and efficiency in large-scale production. Thistechnology enables the deposition of a thick layer and allows precise pattern control.Moreover, this is a highly economic technology, saving large amounts of the used inks. Inthe course of repetitions of the film-deposition procedure there is no waste of material dueto additivity of this thick-film technology. Finally, the thick films can be easily and quicklydeposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodesbased on ionophores as well as crystalline ion-selective materials dedicated forpotentiometric measurements are demonstrated. Analytical parameters of these sensors arecomparable with those reported for conventional potentiometric electrodes. All mentionedthick-film strip electrodes have been totally fabricated in only one, fully automated thick-film technology, without any additional manual, chemical or electrochemical steps. In allcases simple, inexpensive, commercially available materials, i.e. flexible, plastic substratesand easily cured polymer-based pastes were used.

  8. Clothing industry: development problems, regional dislocation and modern management technologies for small enterprises

    Directory of Open Access Journals (Sweden)

    I. Hristoforova

    2015-01-01

    Full Text Available This article discusses issues related to the problems of development of light industry in the territory of the former Soviet Union, systematize industry regions and analyzes modern management technologies used by small businesses garment industry. The aim of the article is the analysis of the organizational and economic aspects of light industry on the example of clothing companies. The objectives of the article: to sistematize the major regions of the dislocation of light industry: textile, footwear, clothing; to characterize the current state of the apparel industry enterprises; to show the value of small clothing companies; to study the need for the introduction of flexible manufacturing systems (FMS on small sewing factories; to analyze the range of the scientific development of national universities in the study of flexible manufacturing systems and give them a brief description.Methodology. The methodological basis of the paper is the following scientific methods: deduction, comparative and group analysis, desk research. The Results. The result of the study is to identify the main issues and trends in the development of light industry, ordering the placement of the industry in the territory of the former Soviet Union, the definition of the most popular management techniques used in small businesses garment industry.Conclusions / significance. The above article analyzes the development of light industry has allowed to identify the main trends and formulate problems for the enterprises. New conditions require the development of small enterprises and the introduction of modern technologies in production processes and management.

  9. Criteria and indicators of the effective application of problem-based learning technologies in teaching at college

    Directory of Open Access Journals (Sweden)

    Shikhova A.T.

    2017-01-01

    Full Text Available this article deals with «the efficiency of the educational process» and «criterion» concepts and the term «indicators». The author designated the requirements for evaluating the criteria of the effectiveness of developed problem-based learning technology at college and showed the most important options of evaluating the effectiveness of problem-based learning technologies implementation in teaching at college, from his point of view. The list of indicated parameters can serve as a mean of evaluation the effectiveness of educational technology in general, and of a specific training session on the subject.

  10. Simulation technologies in networking and communications selecting the best tool for the test

    CERN Document Server

    Pathan, Al-Sakib Khan; Khan, Shafiullah

    2014-01-01

    Simulation is a widely used mechanism for validating the theoretical models of networking and communication systems. Although the claims made based on simulations are considered to be reliable, how reliable they really are is best determined with real-world implementation trials.Simulation Technologies in Networking and Communications: Selecting the Best Tool for the Test addresses the spectrum of issues regarding the different mechanisms related to simulation technologies in networking and communications fields. Focusing on the practice of simulation testing instead of the theory, it presents

  11. The influence of mechatronic learning systems on creative problem solving of pupils participating in technology class A pilot study

    Directory of Open Access Journals (Sweden)

    Kai-Christian Tönnsen

    2017-12-01

    Full Text Available Without being creative and finding solutions for various problems of life mankind wouldn’t be what it is today. Problem solving always has been a key ability for development, in the past, the present and it will also be a key for the future. Creative problem solving is one of the most important ways of technical thinking and acting. Therefore, the ability of finding solutions for problems and realizing them is a primary goal for technological education, especially if it is part of a comprehensive school education. It can be assumed that the available resources affect the possibilities and the result of problem solving processes. In terms of technology classes there are numerous resources that aim for the development of pupils’ creative problem solving skills like for instance mechatronic educational environments (MEEs. Unfortunately there is currently no test instrument for rating the influence of these MEEs on the outcome in terms of creative technical problem solving processes. Therefore, we designed a trial for such purpose and tested it in a pilot study: 33 students (9th grade, average age of 15.24 years of comprehensive schools were given a problem, which had to be solved using three different MEEs. Solutions found by the students have been documented and analyzed to identify system characteristics which enhance or inhibit the creative outcome.Key words: Creative problem solving, technology education, mechatronic educational environments, Festo MecLab, Fischertechnik RoboTX, Lego Mindstorms EV3

  12. Pilot study risk assessment for selected problems at the Nevada Test Site (NTS)

    Energy Technology Data Exchange (ETDEWEB)

    Daniels, J.I. [ed.; Anspaugh, L.R.; Bogen, K.T.; Daniels, J.I.; Layton, D.W.; Straume, T. [Lawrence Livermore National Lab., CA (United States); Andricevic, R.; Jacobson, R.L. [Nevada Univ., Las Vegas, NV (United States). Water Resources Center; Meinhold, A.F.; Holtzman, S.; Morris, S.C.; Hamilton, L.D. [Brookhaven National Lab., Upton, NY (United States)

    1993-06-01

    The Nevada Test Site (NTS) is located in southwestern Nevada, about 105 km (65 mi) northwest of the city of Las Vegas. A series of tests was conducted in the late 1950s and early 1960s at or near the NTS to study issues involving plutonium-bearing devices. These tests resulted in the dispersal of about 5 TBq of {sup 239,24O}Pu on the surficial soils at the test locations. Additionally, underground tests of nuclear weapons devices have been conducted at the NTS since late 1962; ground water beneath the NTS has been contaminated with radionuclides produced by these tests. These two important problems have been selected for assessment. Regarding the plutonium contamination, because the residual {sup 239}Pu decays slowly (half-life of 24,110 y), these sites could represent a long-term hazard if they are not remediated and if institutional controls are lost. To investigate the magnitude of the potential health risks for this no-remediation case, three basic exposure scenarios were defined that could bring individuals in contact with {sup 239,24O}Pu at the sites: (1) a resident living in a subdivision, (2) a resident farmer, and (3) a worker at a commercial facility -- all located at a test site. The predicted cancer risks for the resident farmer were more than a factor of three times higher than the suburban resident at the median risk level, and about a factor of ten greater than the reference worker at a commercial facility. At 100 y from the present, the 5, 50, and 95th percentile risks for the resident farmer at the most contaminated site were 4 x 10{sup {minus}6}, 6 x 10{sup {minus}5}, and 5 x 10{sup {minus}4}, respectively. For the assessment of Pu in surface soil, the principal sources of uncertainty in the estimated risks were population mobility, the relationship between indoor and outdoor contaminant levels, and the dose and risk factors for bone, liver, and lung.

  13. Pilot study risk assessment for selected problems at the Nevada Test Site (NTS)

    Energy Technology Data Exchange (ETDEWEB)

    Daniels, J.I. (ed.)

    1993-06-01

    The Nevada Test Site (NTS) is located in southwestern Nevada, about 105 km (65 mi) northwest of the city of Las Vegas. A series of tests was conducted in the late 1950s and early 1960s at or near the NTS to study issues involving plutonium-bearing devices. These tests resulted in the dispersal of about 5 TBq of [sup 239,24O]Pu on the surficial soils at the test locations. Additionally, underground tests of nuclear weapons devices have been conducted at the NTS since late 1962; ground water beneath the NTS has been contaminated with radionuclides produced by these tests. These two important problems have been selected for assessment. Regarding the plutonium contamination, because the residual [sup 239]Pu decays slowly (half-life of 24,110 y), these sites could represent a long-term hazard if they are not remediated and if institutional controls are lost. To investigate the magnitude of the potential health risks for this no-remediation case, three basic exposure scenarios were defined that could bring individuals in contact with [sup 239,24O]Pu at the sites: (1) a resident living in a subdivision, (2) a resident farmer, and (3) a worker at a commercial facility -- all located at a test site. The predicted cancer risks for the resident farmer were more than a factor of three times higher than the suburban resident at the median risk level, and about a factor of ten greater than the reference worker at a commercial facility. At 100 y from the present, the 5, 50, and 95th percentile risks for the resident farmer at the most contaminated site were 4 x 10[sup [minus]6], 6 x 10[sup [minus]5], and 5 x 10[sup [minus]4], respectively. For the assessment of Pu in surface soil, the principal sources of uncertainty in the estimated risks were population mobility, the relationship between indoor and outdoor contaminant levels, and the dose and risk factors for bone, liver, and lung.

  14. Transmutation technologies to solve the problem of long-term spent nuclear fuel storage

    International Nuclear Information System (INIS)

    Hosnedl, P.; Valenta, V.; Blahut, O.

    2000-01-01

    The paper gives a brief description of the transmutation process for actinides and long-lived fission products which are present in spent nuclear fuel. Transmutation technologies can solve the problem of long-term spent nuclear fuel storage and reduce the requirements for storage time and conditions. The basic data and requirements for the detailed design of the transmutor are summarized, and the views upon how to address the fuel purification and dry reprocessing issues are discussed. The results of activities of SKODA JS are highlighted; these include, for instance, the fluoride salt-resistant material MONICR, test loops, and electrowinners. The preliminary design of the transmutor is also outlined. Brief information regarding activities in the field of transmutation technologies in the Czech Republic and worldwide is also presented. The research and design activities to be developed for the whole design of the demonstration and basic units are summarized. It is emphasized that SKODA JS can join in international cooperation without constraints. The Attachment presents a simple assessment of how the radioactivity balance can be reduced, based on the actinide and long-lived fission product transmutation half-lives, is presented in the Attachment. (author)

  15. Problems, policies and politics: making the case for better assistive technology provision in Australia.

    Science.gov (United States)

    Layton, Natasha

    2015-05-01

    Substantial evidence supports assistive technology and environmental adaptations as key enablers to participation. In order to realise the potential of these interventions, they need to be both recognised in policy, and resourced in practice. This paper uses political theory to understand the complexities of assistive technology (AT) policy reform in Australia. AT research will not be influential in improving AT policy without consideration of political drivers. Theories of policy formation are considered, with Kingdon's (2003) theory of multiple streams identified as a useful lens through which to understand government actions. This theory is applied to the case of current AT policy reformulation in Australia. The convergence model of problem identification, policy formulation and political will is found to be an applicable construct with which to evaluate contemporary policy changes. This paper illustrates the cogency of this theory for the field of AT, in the case of Australia's recent disability and aged care reforms. Political theory provides a way of conceptualising the difficulties of consumers and AT practitioners experience in getting therapeutically valid solutions into public policy, and then getting policies prioritised and funded. It is suggested that AT practitioners must comprehend and consider political factors in working towards effective policies to support their practice. AT practitioners generally lack political awareness or an understanding of the drivers of policy. The effectiveness of AT practitioners at a systemic level will remain limited without consideration of policy drivers. AT practitioners must comprehend and consider political factors in working towards effective policies to support their practice.

  16. The application of nuclear science technology to understanding and solving environmental problems

    International Nuclear Information System (INIS)

    Zuk, W.M.

    1997-01-01

    The Australian Nuclear Science and Technology Organisation (ANSTO) has for many years been involved in applying nuclear science-based and related technologies to the understanding of environmental processes and to the development and implementation of practical and effective solutions to site specific problems, for a broad spectrum of industry, government regulatory agencies, and other organisations in Australia, Europe, North and South America and South East Asia. ANSTO's environmental science program arose out of the need for research to predict, measure, evaluate and monitor the environmental impacts associated with : uranium mining and processing in Australia; the operation of the research reactor at Lucas Heights; and the safe treatment and disposal of radioactive and conventional wastes associated with these activities. The expertise developed in these activities, has found application to a much broader range of environmental concerns. This paper will present an overview of ANSTO's application of nuclear science-based techniques to, inter alia: coastal and marine studies; minesite rehabilitation; transport and geochemical modelling of radionuclides, heavy metals and organic chemicals in the geosphere; the application of naturally-occurring radionuclides and radioactive tracers to corrosion and sedimentation studies in the coastal environment; dating sediments, fish corals and archaeological samples; the understanding of the kinetics and the physiological responses of aquatic organisms to radionuclides and metals in the environment: and the use of aquatic organism as archival and 'realtime' monitors of pollutants

  17. Technological significances to reduce the material problems. Feasibility of heat flux reduction

    International Nuclear Information System (INIS)

    Yamazaki, Seiichiro; Shimada, Michiya.

    1994-01-01

    For a divertor plate in a fusion power reactor, a high temperature coolant must be used for heat removal to keep thermal efficiency high. It makes the temperature and thermal stress of wall materials higher than the design limits. Issues of the coolant itself, e.g. burnout of high temperature water, will also become a serious problem. Sputtering erosion of the surface material will be a great concern of its lifetime. Therefore, it is necessary to reduce the heat and particle loads to the divertor plate technologically. The feasibility of some technological methods of heat reduction, such as separatrix sweeping, is discussed. As one of the most promising ideas, the methods of radiative cooling of the divertor plasma are summarized based on the recent results of large tokamaks. The feasibility of remote radiative cooling and gas divertor is discussed. The ideas are considered in recent design studies of tokamak power reactors and experimental reactors. By way of example, conceptual designs of divertor plate for the steady state tokamak power reactor are described. (author)

  18. Problems of calibrating measuring instruments for selective gamma-gamma logging

    International Nuclear Information System (INIS)

    Daniel, J.; Smolarova, H.

    1977-01-01

    Quantitative determination of copper content in the Novoveska Huta chalcopyrite deposit is described using selective gamma-gamma logging. Factors influencing the calibration quality are discussed. (author)

  19. Assessing consumer benefits of selected gas appliance technology center tasks. Topical report, April-December 1992

    International Nuclear Information System (INIS)

    Smith, T.R.; Bournakis, A.D.; Worek, W.M.; Kalensky, D.C.; Dombrowski, L.P.

    1992-12-01

    The Gas Appliance Technology Center (GATC) was created in 1983 to assist the gas industry in bringing about a new generation of reasonably priced, advanced gas appliances. The objective of the report is to evaluate consumer benefits of sixteen selected GATC tasks for the time period between 1983 and 1990. Tasks were selected for review based upon their degree of industry impact and how well they represented activities in the four targeted research areas of Space Conditioning, Commercial Appliances, Residential Appliances, and Codes and Standards

  20. Technology needs for selecting and evaluating high-level waste repository sites in crystalline rock

    International Nuclear Information System (INIS)

    1988-12-01

    This report describes properties and processes that govern the performance of the geological barrier in a nuclear waste isolation system in crystalline rock and the state-of-the-art in the understanding of these properties and processes. Areas and topics that require further research and development as well as technology needs for investigating and selecting repository sites are presented. Experiences from the Swedish site selection program are discussed, and a general investigation strategy is presented for an area characterization phase of an exploratory program in crystalline rocks. 255 refs., 65 figs., 10 tabs

  1. The Creativity of Reflective and Impulsive Selected Students in Solving Geometric Problems

    Science.gov (United States)

    Shoimah, R. N.; Lukito, A.; Siswono, T. Y. E.

    2018-01-01

    This research purposed to describe the elementary students’ creativity with reflective and impulsive cognitive style in solving geometric problems. This research used qualitative research methods. The data was collected by written tests and task-based interviews. The subjects consisted of two 5th grade students that were measured by MFFT (Matching Familiar Figures Test). The data were analyzed based on the three main components of creativity; that is fluency, flexibility, and novelty. This results showed that subject with reflective cognitive style in solving geometric problems met all components of creativity (fluency; subject generated more than three different right-ideas in solving problems, flexibility; subject generated more than two different ways to get problem solved, and novelty; subject generated new ideas and new ways that original and has never been used before). While subject with impulsive cognitive style in solving geometric problems met two components of creativity (fluency; subject generated more than three different right-ideas in solving problems, flexibility; subject generated two different ways to get problem solved). Thus, it could be concluded that reflective students are more creative in solving geometric problems. The results of this research can also be used as a guideline in the future assessment of creativity based on cognitive style.

  2. A Comparative Analysis of Word Problems in Selected United States and Russian First Grade Textbooks

    Science.gov (United States)

    Grishchenko, Svetlana

    2009-01-01

    The purpose of this study was to explore word problems as a subject matter in mathematics textbook curricula. The motivation for the study derived from the following evidence: (a) American students find some word problems are more difficult than others (Garcia, Jimenez, & Hess, 2006; Riley & Green, 1988; Stern, 2001), and (b) one of the…

  3. Technological problems concerning the complex recovery of uranium and accompanying elements from sedimentary ores

    International Nuclear Information System (INIS)

    Pinkas, K.

    1977-01-01

    In Poland a deposit of carbonaceous clay shales has been discovered, it contains 1600ppmV, 100ppmu and 180ppm Mo. On the basis of the experiments carried out on the laboratory scale, it has been shown, that the leaching of the shales by means of the diluted solutions of sulphuric acid or sodium carbonates does not assure the high recovery of vanadium and uranium because of their occurrence in shales in refractory forms. The treatment of the shales by using of the concentrated sulphuric acid /250g/1kg shales/, according to the ''acid cure'' method and baking them in the temperature of 250 0 C, has permitted the recovery of 70% vanadium and 65% uranium. From the acid leaching residue, or from the shales directly, 70% of molybdenum can be gained, employing an alkaline pretreatment. The solutions after acid leaching contain great quantities of Al and Fe, which before the separation of U and V by solvent extraction must be to some extent removed. The performed tests have confirmed this, and by using a crystallization process, as by-products the aluminum- and iron sulphates have been obtained. From the solutions, after crystallization by amine solvent extraction, the uranium and vanadium concentrates have been recovered. The currently recognized technological method has been estimated as difficult and expensive. In order to utilize, more economically, this low grade and very refractory for pretreatment shales it is necessary to continue intensive technological research on the improvement of the recognized method and explore new ways, which could contribute to successful solution of this complicated technological problem

  4. New technologies in Islamic countries. Power engineering, transport, oil industry, machinery construction, building construction and information technologies problems

    International Nuclear Information System (INIS)

    Sharipova, N.S.

    1999-01-01

    The published proceedings contain brief presentations concerning new technologies in power engineering, transport, oil industry, machinery construction, building construction and information technologies presented to the International scientific and technical conference: New technologies in Islamic countries, which was organized within frame work of 6 General Assembly of Federation of engineering Institutes of Islamic countries (FEIIC). (author)

  5. New technologies in Islamic countries. Power engineering, transport, oil industry, machinery construction, building construction and information technologies problems

    International Nuclear Information System (INIS)

    Sharipova, N.S.

    1999-01-01

    This issue contains papers, which reflect the most important achievements of new technologies in power engineering, transport, oil industry, machinery construction, building construction and information technologies presented to the International Scientific and Technical Conference: New technologies in Islamic countries, which was organized within frame work of 6 General Assembly of Federation of Engineering Institutes of Islamic Countries (FEIIC). (author)

  6. Africa's search for communication technologies for education: a reflection on problems and prospects.

    Science.gov (United States)

    Ofori-ansa, K

    1983-09-01

    In postindependence Africa new and more efficient strategies were required to support educational expansion. Political independence was accompanied by an increased demand for education to meet the growing labor force needs of the emerging countries in Africa. It was considered that education, as a means for human resource development, was a viable capital investment necessary to support both social and economic development, yet in many African nations, the educational systems and the traditional teaching methods inherited from colonial rule were not adequate to satisfy the increased demand for trained personnel. In response to the need for educational reforms and expansion, governments of many African countries invested heavily in the development of their education systems. During the 1970s it is estimated that Africa spent between 15-20% of the national budget on education. That high level of expenditure was justified by the increased demand for education. The educational expansion efforts also increased shortages of qualified and competent teachers, shortages of adequate equipment, and physical facilities. New strategies and resources with required to solve these increasing problems. Many African countries began to experiment with the use of mass communication technologies to support their educational reform efforts. There was generally consensus that the mass media, particularly radio and television, had certain qualities that could be exploited either to replace or improve conventional methods of teaching. By the late 1960s at least 16 African countries were using educational broadcasting of 1 form or another. International aid agencies, govermental donor agencies, and private foundations in the industrially advanced countries provided the support base for many African countries in their efforts to use radio and television for educational improvement. Most of these efforts failed to make any significant impact on educational development in Africa. Educational

  7. Decision support tool for used oil regeneration technologies assessment and selection.

    Science.gov (United States)

    Khelifi, Olfa; Dalla Giovanna, Fabio; Vranes, Sanja; Lodolo, Andrea; Miertus, Stanislav

    2006-09-01

    Regeneration is the most efficient way of managing used oil. It saves money by preventing costly cleanups and liabilities that are associated with mismanagement of used oil, it helps to protect the environment and it produces a technically renewable resource by enabling an indefinite recycling potential. There are a variety of processes and licensors currently offering ways to deal with used oils. Selecting a regeneration technology for used oil involves "cross-matching" key criteria. Therefore, the first prototype of spent oil regeneration (SPORE), a decision support tool, has been developed to help decision-makers to assess the available technologies and select the preferred used oil regeneration options. The analysis is based on technical, economical and environmental criteria. These criteria are ranked to determine their relative importance for a particular used oil regeneration project. The multi-criteria decision analysis (MCDA) is the core of the SPORE using the PROMETHEE II algorithm.

  8. The regional electricity generation mix in Scotland: A portfolio selection approach incorporating marine technologies

    International Nuclear Information System (INIS)

    Allan, Grant; Eromenko, Igor; McGregor, Peter; Swales, Kim

    2011-01-01

    Standalone levelised cost assessments of electricity supply options miss an important contribution that renewable and non-fossil fuel technologies can make to the electricity portfolio: that of reducing the variability of electricity costs, and their potentially damaging impact upon economic activity. Portfolio theory applications to the electricity generation mix have shown that renewable technologies, their costs being largely uncorrelated with non-renewable technologies, can offer such benefits. We look at the existing Scottish generation mix and examine drivers of changes out to 2020. We assess recent scenarios for the Scottish generation mix in 2020 against mean-variance efficient portfolios of electricity-generating technologies. Each of the scenarios studied implies a portfolio cost of electricity that is between 22% and 38% higher than the portfolio cost of electricity in 2007. These scenarios prove to be mean-variance 'inefficient' in the sense that, for example, lower variance portfolios can be obtained without increasing portfolio costs, typically by expanding the share of renewables. As part of extensive sensitivity analysis, we find that Wave and Tidal technologies can contribute to lower risk electricity portfolios, while not increasing portfolio cost. - Research Highlights: → Portfolio analysis of scenarios for Scotland's electricity generating mix in 2020. → Reveals potential inefficiencies of selecting mixes based on levelised cost alone. → Portfolio risk-reducing contribution of Wave and Tidal technologies assessed.

  9. Recycling and social technologies for sustainability: The Brazilian experience of wastepickers' inclusion in selective collection programs.

    Science.gov (United States)

    Lima, Francisco de Paula Antunes; de Oliveira, Fabiana Goulart

    2017-01-01

    Alternatives are being developed for waste treatment all over the world. Solidary selective collection is a recognized social technology for taking millions of people out of absolute poverty. However, this technology raises crucial questions regarding its nature and development perspective. What can be said of the legitimacy of a social technology that is born from misery and maintains wastepickers in precarious work conditions? This article approaches issues based on the analysis of the wastepickers' work process, highlighting the difficulties and interpersonal conflicts, the strong social bonds and creativity that reveal the potential of efficiency and solidarity of this social technology. The analyses are founded on empirical descriptions of work situations and organizational arrangements that the wastepickers themselves have developed. The observations were made during the work, followed by interviews focused on significant events and behaviors. The contradiction between efficiency and solidarity, which excludes workers from the formal labor market, finds in the associations a solution for people with different capacities. This social technology offers much more than simple survival or exoticism. The wastepickers create a sustainable mode of production, putting together economic, social and environmental criteria in an innovative and fair production technology.

  10. The regional electricity generation mix in Scotland: A portfolio selection approach incorporating marine technologies

    Energy Technology Data Exchange (ETDEWEB)

    Allan, Grant, E-mail: grant.j.allan@strath.ac.u [Fraser of Allander Institute, Department of Economics, University of Strathclyde, Sir William Duncan Building, 130 Rottenrow, Glasgow G4 0GE (United Kingdom); Eromenko, Igor; McGregor, Peter [Fraser of Allander Institute, Department of Economics, University of Strathclyde, Sir William Duncan Building, 130 Rottenrow, Glasgow G4 0GE (United Kingdom); Swales, Kim [Department of Economics, University of Strathclyde, Sir William Duncan Building, 130 Rottenrow, Glasgow G4 0GE (United Kingdom)

    2011-01-15

    Standalone levelised cost assessments of electricity supply options miss an important contribution that renewable and non-fossil fuel technologies can make to the electricity portfolio: that of reducing the variability of electricity costs, and their potentially damaging impact upon economic activity. Portfolio theory applications to the electricity generation mix have shown that renewable technologies, their costs being largely uncorrelated with non-renewable technologies, can offer such benefits. We look at the existing Scottish generation mix and examine drivers of changes out to 2020. We assess recent scenarios for the Scottish generation mix in 2020 against mean-variance efficient portfolios of electricity-generating technologies. Each of the scenarios studied implies a portfolio cost of electricity that is between 22% and 38% higher than the portfolio cost of electricity in 2007. These scenarios prove to be mean-variance 'inefficient' in the sense that, for example, lower variance portfolios can be obtained without increasing portfolio costs, typically by expanding the share of renewables. As part of extensive sensitivity analysis, we find that Wave and Tidal technologies can contribute to lower risk electricity portfolios, while not increasing portfolio cost. - Research Highlights: {yields} Portfolio analysis of scenarios for Scotland's electricity generating mix in 2020. {yields} Reveals potential inefficiencies of selecting mixes based on levelised cost alone. {yields} Portfolio risk-reducing contribution of Wave and Tidal technologies assessed.

  11. Human Subjects Protection and Technology in Prevention Science: Selected Opportunities and Challenges

    OpenAIRE

    Pisani, Anthony R.; Wyman, Peter A.; Mohr, David C.; Perrino, Tatiana; Gallo, Carlos; Villamar, Juan; Kendziora, Kimberly; Howe, George W.; Sloboda, Zili; Brown, C. Hendricks

    2016-01-01

    Internet-connected devices are changing the way people live, work, and relate to one another. For prevention scientists, technological advances create opportunities to promote the welfare of human subjects and society. The challenge is to obtain the benefits while minimizing risks. In this article, we use the guiding principles for ethical human subjects research and proposed changes to the Common Rule regulations, as a basis for discussing selected opportunities and challenges that new techn...

  12. Chemical-technological approach to the selection of ceramic materials with predetermined thermistor properties

    Energy Technology Data Exchange (ETDEWEB)

    Plewa, J.; Altenburg, H. [Fachhochschule Muenster, Steinfurt (Germany). SIMa and Supraleiter-Keramik-Kristalle; Brunner, M. [Fachhochschule Koeln (Germany). Elektronische Bauelemente; Shpotyuk, O.; Vakiv, M. [Scientific Research Co. ' ' Carat' ' , Lviv Scientific Research Inst. of Materials, Lviv (Ukraine)

    2002-07-01

    The selection possibilities of quaternary Cu-Ni-Co-Mn oxide system restricted by cubic spinels (CuMn{sub 2}O{sub 4}, MnCo{sub 2}O{sub 4} and NiMn{sub 2}O{sub 4}) for NTC thermistors application were discussed. Phase compositions, microstructural features and electrical properties of the investigated spinel-structured ceramics were studied in tight connection with technological regimes of their sintering. (orig.)

  13. Technical investigation in solid waste to energy facilities and selection of suitable incineration technology for Tehran

    International Nuclear Information System (INIS)

    Mokarizdeh, V.; Lari, H.R.

    2001-01-01

    Incineration is another way for producing electrical energy. There are various methods for incineration as Stoker Fired, Suspension Fired, Rotary Kiln, Cyclone and Fluidized Bed; that each one has it's own advantages and disadvantages. Selecting suitable one for establishment in Tehran depends on many parameters like technical, economical and environmental factors. Comparing the various technologies due to the mentioned parameters by Multi Criteria Decision Making method shows that stoker-fired incinerator is the best one for the Capital City

  14. Selective attention to emotional pictures as a function of gambling motives in problem and nonproblem gamblers.

    Science.gov (United States)

    Hudson, Amanda; Jacques, Sophie; Stewart, Sherry H

    2013-12-01

    Problem gambling may reflect a maladaptive means of fulfilling specific affect-regulation motives, such as enhancing positive affect or coping with negative affect. Research with clinical populations indicates that disorders with prominent affective symptoms are characterized by attentional biases for symptom-congruent information. Thus, we assessed whether problem gamblers with enhancement motives for gambling would demonstrate attentional biases for positive emotional information, relative to other types of emotional information, and problem gamblers with coping motives for gambling would demonstrate attentional biases for negative emotional information, compared with other types of emotional information. In addition, we expected motive-congruent biases to be stronger in problem gamblers than nonproblem gamblers. To test these hypotheses, problem and nonproblem gamblers received an emotional orienting task in which neutral, negative, and positive pictorial cues appeared to one side of the computer screen, followed by target words in cued or uncued locations. In a look-away condition, participants had to shift attention away from pictures to respond to predominantly uncued targets, whereas in a look-toward condition, they had to orient to pictures to categorize predominantly cued targets. The results revealed motive-congruent orienting biases and disengagement lags for emotional pictures in problem gamblers. The link between motives and affective biases was less apparent in nonproblem gamblers. Results suggest that attentional measures may provide a useful complement to the subjective methodologies that are typically employed in studying problem gamblers. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  15. Evaluation and Selection of Renewable Energy Technologies for Highway Maintenance Facilities

    Science.gov (United States)

    Andrews, Taylor

    The interest in renewable energy has been increasing in recent years as attempts to reduce energy costs as well the consumption of fossil fuels are becoming more common. Companies and organizations are recognizing the increasing reliance on limited fossil fuels' resources, and as competition and costs for these resources grow, alternative solutions are becoming more appealing. Many federally run buildings and associations also have the added pressure of meeting the mandates of federal energy policies that dictate specific savings or reductions. Federal highway maintenance facilities run by the Department of Transportation fall into this category. To help meet energy saving goals, an investigation into potential renewable energy technologies was completed for the Ohio Department of Transportation. This research examined several types of renewable energy technologies and the major factors that affect their performance and evaluated their potential for implementation at highway maintenance facilities. Facilities energy usage data were provided, and a facility survey and site visits were completed to enhance the evaluation of technologies and the suitability for specific projects. Findings and technology recommendations were presented in the form of selection matrices, which were designed to help make selections in future projects. The benefits of utilization of other tools such as analysis software and life cycle assessments were also highlighted. These selection tools were designed to be helpful guides when beginning the pursuit of a renewable energy technology for highway maintenance facilities, and can be applied to other similar building types and projects. This document further discusses the research strategies and findings as well as the recommendations that were made to the personnel overseeing Ohio's highway maintenance facilities.

  16. Selected Problems of Applying the Law in Adaptation and Modernization of Buildings in Poland

    Science.gov (United States)

    Korbel, Wojciech

    2016-06-01

    Chosen problems of law implementation in the contemporary process of building's modernization in Poland. One of the major problems in the contemporary process of building's modernization in Poland is the pluralism of different interpretations of chosen legal terms, existing in the contemporary building code. Incorrect interpretation, results in the incorrect application to the authorities for the proper building permit and as the effect, it causes the lost of time and money. The article tries to identify some of these problems and seeks the solution to solve them, through the evolutionary method of building law creation.

  17. DEVELOPMENT OF METHODS OF ESTIMATION, ANALYSIS, SUBSTANTIATION AND SELECTION OF ORGANIZATIONAL AND TECHNOLOGICAL DECISIONS FOR RECONSTRUCTION OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    SIEDIN V. L.

    2017-02-01

    Full Text Available Raising of problem. Over the past decade, changes in the economy have led to the decline of many industrial enterprises, which in turn led to the emergence of abandoned buildings and degraded areas that create a social and environmental hazard. Accordingly, the buildings and structures of such enterprises do not function and need reconstruction. Purpose of the aricle. Study of the development of methods for assessing, analyzing, substantiating and selecting rational organizational and technological decisions for the reconstruction of industrial enterprises. Conclusion. With the aim of transforming degraded and disordered territories into modern centers of vital activity, it is necessary to identify in each populated area the areas of priority renovation and reconstruction, and also to concentrate budgetary funds and private investments for the implementation of such projects. In the implementation of the above measures, the settlements will be systematically updated in accordance with european standards.

  18. Lactic Acid Bacteria Selection for Biopreservation as a Part of Hurdle Technology Approach Applied on Seafood

    Directory of Open Access Journals (Sweden)

    Norman Wiernasz

    2017-05-01

    Full Text Available As fragile food commodities, microbial, and organoleptic qualities of fishery and seafood can quickly deteriorate. In this context, microbial quality and security improvement during the whole food processing chain (from catch to plate, using hurdle technology, a combination of mild preserving technologies such as biopreservation, modified atmosphere packaging, and superchilling, are of great interest. As natural flora and antimicrobial metabolites producers, lactic acid bacteria (LAB are commonly studied for food biopreservation. Thirty-five LAB known to possess interesting antimicrobial activity were selected for their potential application as bioprotective agents as a part of hurdle technology applied to fishery products. The selection approach was based on seven criteria including antimicrobial activity, alteration potential, tolerance to chitosan coating, and superchilling process, cross inhibition, biogenic amines production (histamine, tyramine, and antibiotics resistance. Antimicrobial activity was assessed against six common spoiling bacteria in fishery products (Shewanella baltica, Photobacterium phosphoreum, Brochothrix thermosphacta, Lactobacillus sakei, Hafnia alvei, Serratia proteamaculans and one pathogenic bacterium (Listeria monocytogenes in co-culture inhibitory assays miniaturized in 96-well microtiter plates. Antimicrobial activity and spoilage evaluation, both performed in cod and salmon juice, highlighted the existence of sensory signatures and inhibition profiles, which seem to be species related. Finally, six LAB with no unusual antibiotics resistance profile nor histamine production ability were selected as bioprotective agents for further in situ inhibitory assays in cod and salmon based products, alone or in combination with other hurdles (chitosan, modified atmosphere packing, and superchilling.

  19. Process cost and facility considerations in the selection of primary cell culture clarification technology.

    Science.gov (United States)

    Felo, Michael; Christensen, Brandon; Higgins, John

    2013-01-01

    The bioreactor volume delineating the selection of primary clarification technology is not always easily defined. Development of a commercial scale process for the manufacture of therapeutic proteins requires scale-up from a few liters to thousands of liters. While the separation techniques used for protein purification are largely conserved across scales, the separation techniques for primary cell culture clarification vary with scale. Process models were developed to compare monoclonal antibody production costs using two cell culture clarification technologies. One process model was created for cell culture clarification by disc stack centrifugation with depth filtration. A second process model was created for clarification by multi-stage depth filtration. Analyses were performed to examine the influence of bioreactor volume, product titer, depth filter capacity, and facility utilization on overall operating costs. At bioreactor volumes 5,000 L, clarification using centrifugation followed by depth filtration offers significant cost savings. For bioreactor volumes of ∼ 2,000 L, clarification costs are similar between depth filtration and centrifugation. At this scale, factors including facility utilization, available capital, ease of process development, implementation timelines, and process performance characterization play an important role in clarification technology selection. In the case study presented, a multi-product facility selected multi-stage depth filtration for cell culture clarification at the 500 and 2,000 L scales of operation. Facility implementation timelines, process development activities, equipment commissioning and validation, scale-up effects, and process robustness are examined. © 2013 American Institute of Chemical Engineers.

  20. Measuring process performance within healthcare logistics - a decision tool for selecting track and trace technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    quality of work. Data validity is essential for enabling performance measurement, and selecting the right technologies is important to achieve this. A case study of the hospital cleaning process was conducted at a public Danish hospital to develop a framework for assessing technologies in healthcare......Monitoring tasks and ascertaining quality of work is difficult in a logistical healthcare process due to cleaning personnel being dispersed throughout the hospital. Performance measurement can support the organization in improving the efficiency and effectiveness of processes and in ensuring...... logistics. A set of decision indicators was identified in the case study to assess technologies based on expected process performance. Two aspects of performance measurement were investigated for the hospital cleaning process: what to measure and how to measure it....

  1. Geoengineering Responses to Climate Change Selected Entries from the Encyclopedia of Sustainability Science and Technology

    CERN Document Server

    Vaughan, Naomi

    2013-01-01

    Failure by the international community to make substantive progress in reducing CO2 emissions, coupled with recent evidence of accelerating climate change, has brought increasing urgency to the search for additional remediation approaches.  This book presents a selection of state-of-the-art geoengineering methods for deliberately reducing the effects of anthropogenic climate change, either by actively removing greenhouse gases from the atmosphere or by decreasing the amount of sunlight absorbed at the Earth’s surface.  These methods contrast with more conventional mitigation approaches which focus on reducing emissions of greenhouse gases, especially carbon dioxide. Geoengineering technologies could become a key tool to be used in conjunction with emissions reduction to limit the magnitude of climate change.  Featuring authoritative, peer-reviewed entries from the Encyclopedia of Sustainability Science and Technology, this book presents a wide range of climate change remediation technologies. Examines th...

  2. Comparison of curricula in radiation technology in the field of radiotherapy in selected European Union countries

    International Nuclear Information System (INIS)

    Janaszczyk, A.; Bogusz-Czerniewicz, M.

    2011-01-01

    Background: Radiation technology is a discipline of medical science which deals with diagnostics, imaging and radiotherapy, that is treatment by ionizing radiation. Aim: To present and compare the existing curricula of radiation technology in selected EU countries. Materials and methods: The research work done for the purpose of the comparative analysis was based on the methods of diagnostic test and document analysis. Results: The comparison of curricula in selected countries, namely Austria, France, the Netherlands and Poland, showed that admission criteria to radiation technology courses are varied and depend on regulations of respective Ministries of Health. The most restrictive conditions, including written tests in biology, chemistry and physics, and psychometric test, are those in France. Contents of basic and specialist subject groups are very similar in all the countries. The difference is in the number of ECT points assigned to particular subjects and the number of course hours offered. The longest practical training is provided in the Netherlands and the shortest one in Poland. The duration of studies in the Netherlands is 4 years, while in Poland it is 3 years. Austria is the only country to offer extra practical training in quality management. Conclusion: Graduates in the compared EU countries have similar level of qualifications in the fields of operation of radiological equipment, radiotherapy, nuclear medicine, foreign language and specialist terminology in the field of medical and physical sciences, general knowledge of medical and physical sciences, and detailed knowledge of radiation technology. (authors)

  3. Optimal Selection Method of Process Patents for Technology Transfer Using Fuzzy Linguistic Computing

    Directory of Open Access Journals (Sweden)

    Gangfeng Wang

    2014-01-01

    Full Text Available Under the open innovation paradigm, technology transfer of process patents is one of the most important mechanisms for manufacturing companies to implement process innovation and enhance the competitive edge. To achieve promising technology transfers, we need to evaluate the feasibility of process patents and optimally select the most appropriate patent according to the actual manufacturing situation. Hence, this paper proposes an optimal selection method of process patents using multiple criteria decision-making and 2-tuple fuzzy linguistic computing to avoid information loss during the processes of evaluation integration. An evaluation index system for technology transfer feasibility of process patents is designed initially. Then, fuzzy linguistic computing approach is applied to aggregate the evaluations of criteria weights for each criterion and corresponding subcriteria. Furthermore, performance ratings for subcriteria and fuzzy aggregated ratings of criteria are calculated. Thus, we obtain the overall technology transfer feasibility of patent alternatives. Finally, a case study of aeroengine turbine manufacturing is presented to demonstrate the applicability of the proposed method.

  4. LEAGUE OF LEGENDS GAME CHARACTERS SELECTION PROBLEMS OF THE MULTICRITERIA DECISION MAKING METHOD AND SOLUTION

    OpenAIRE

    ERCAN, Merve; YILDIRIM, Meral; OTURAK, Çiğdem; EREN, Tamer

    2018-01-01

    Strategy games occupy a very important place in gaming industry. In this study, characterselection is made according to the rival team which is created by developing scenarios for Summoner's Rift inLeague of Legends (LOL) strategy game and Howling Abyss modes. In order to solve the problem, AnalyticalHierarchy Process (AHP), TOPSIS and PROMETHEE methods are utilized from multicriteria decision makingmethods in Summoner's Rift and Howling Abyss mode. For the problem, five alternative...

  5. A selection of problems related to safe working conditions in nuclear power plants

    International Nuclear Information System (INIS)

    Brunner, K.H.

    1984-01-01

    Two representative examples were chosen to demonstrate that the problems related to safe working conditions can be solved with work being prepared extensively and in detail taking into consideration radiation protection and conventional job safety measures and with qualified staff. Most of the job safety problems in nuclear power plants are pretty much the same as in conventional plants. Despite successful implementation of employment and radiation protection in nuclear power plants, improvements in detail are possible and make sense. (orig.) [de

  6. Solving a More Flexible Home Health Care Scheduling and Routing Problem with Joint Patient and Nursing Staff Selection

    Directory of Open Access Journals (Sweden)

    Jamal Abdul Nasir

    2018-01-01

    Full Text Available Development of an efficient and effective home health care (HHC service system is a quite recent and challenging task for the HHC firms. This paper aims to develop an HHC service system in the perspective of long-term economic sustainability as well as operational efficiency. A more flexible mixed-integer linear programming (MILP model is formulated by incorporating the dynamic arrival and departure of patients along with the selection of new patients and nursing staff. An integrated model is proposed that jointly addresses: (i patient selection; (ii nurse hiring; (iii nurse to patient assignment; and (iv scheduling and routing decisions in a daily HHC planning problem. The proposed model extends the HHC problem from conventional scheduling and routing issues to demand and capacity management aspects. It enables an HHC firm to solve the daily scheduling and routing problem considering existing patients and nursing staff in combination with the simultaneous selection of new patients and nurses, and optimizing the existing routes by including new patients and nurses. The model considers planning issues related to compatibility, time restrictions, contract durations, idle time and workload balance. Two heuristic methods are proposed to solve the model by exploiting the variable neighborhood search (VNS approach. Results obtained from the heuristic methods are compared with a CPLEX based solution. Numerical experiments performed on different data sets, show the efficiency and effectiveness of the solution methods to handle the considered problem.

  7. Population SAMC vs SAMC: Convergence and Applications to Gene Selection Problems

    KAUST Repository

    Faming Liang, Mingqi Wu

    2013-01-01

    The Bayesian model selection approach has been adopted by more and more people when analyzing a large data. However, it is known that the reversible jump MCMC (RJMCMC) algorithm, which is perhaps the most popular MCMC algorithm for Bayesian model

  8. Public and private health insurance in Germany: the ignored risk selection problem.

    Science.gov (United States)

    Grunow, Martina; Nuscheler, Robert

    2014-06-01

    We investigate risk selection between public and private health insurance in Germany. With risk-rated premiums in the private system and community-rated premiums in the public system, advantageous selection in favor of private insurers is expected. Using 2000 to 2007 data from the German Socio-Economic Panel Study (SOEP), we find such selection. While private insurers are unable to select the healthy upon enrollment, they profit from an increase in the probability to switch from private to public health insurance of those individuals who have experienced a negative health shock. To avoid distorted competition between the two branches of health care financing, risk-adjusted transfers from private to public insurers should be instituted. Copyright © 2013 John Wiley & Sons, Ltd.

  9. Reliable Path Selection Problem in Uncertain Traffic Network after Natural Disaster

    Directory of Open Access Journals (Sweden)

    Jing Wang

    2013-01-01

    Full Text Available After natural disaster, especially for large-scale disasters and affected areas, vast relief materials are often needed. In the meantime, the traffic networks are always of uncertainty because of the disaster. In this paper, we assume that the edges in the network are either connected or blocked, and the connection probability of each edge is known. In order to ensure the arrival of these supplies at the affected areas, it is important to select a reliable path. A reliable path selection model is formulated, and two algorithms for solving this model are presented. Then, adjustable reliable path selection model is proposed when the edge of the selected reliable path is broken. And the corresponding algorithms are shown to be efficient both theoretically and numerically.

  10. Hybrid nested sampling algorithm for Bayesian model selection applied to inverse subsurface flow problems

    KAUST Repository

    Elsheikh, Ahmed H.; Wheeler, Mary Fanett; Hoteit, Ibrahim

    2014-01-01

    A Hybrid Nested Sampling (HNS) algorithm is proposed for efficient Bayesian model calibration and prior model selection. The proposed algorithm combines, Nested Sampling (NS) algorithm, Hybrid Monte Carlo (HMC) sampling and gradient estimation using

  11. Potential Science and Technology Game Changers for the Ground Warfare of 2050: Selected Projections Made in 2017

    Science.gov (United States)

    2018-02-01

    ARL-TR-8283 ● FEB 2018 US Army Research Laboratory Potential Science and Technology Game Changers for the Ground Warfare of 2050...Science and Technology Game Changers for the Ground Warfare of 2050: Selected Projections Made in 2017 by Alexander Kott Office of the Director...Brian Sadler Vehicle Technology Directorate, ARL Ananthram Swami Computational and Information Sciences Directorate, ARL Approved for

  12. Measuring Teaching Quality in Higher Education : Assessing the Problem of Selection Bias in Course Evaluations

    OpenAIRE

    Salomons, Anna; Goos, Maarten

    2014-01-01

    Student evaluations of teaching are widely used to measure teaching quality and compare it across different courses, teachers, departments and institutions: as such, they are of increasing importance for teacher promotion decisions as well as student course selection. However, the response on course evaluations is rarely perfect, rendering such uses unwarranted if students who participate in the evaluation are not randomly selected: this paper is the first to investigate this issue. We quanti...

  13. Potential of organic Rankine cycle technology in India: Working fluid selection and feasibility study

    International Nuclear Information System (INIS)

    Sarkar, Jahar; Bhattacharyya, Souvik

    2015-01-01

    India has great potential to employ the ORC (organic Rankine cycle) technology for conversion of low temperature waste heat and renewable energy. In this study, available waste heat and relevant renewable heat sources in India are reviewed and suitable working fluids for ORC have been selected based on operational, environmental and safety criteria. A feasibility study and comparison of selected fluids for ORC is also presented for Indian climates along with discussions on component, operation and cost related aspects. A comprehensive review on available heat sources and sinks shows that India has plenty of waste heat and renewable energy sources for electricity generation by means of ORC; however, condenser operation may be challenging due to wide ambient temperature variation. Appropriate performance comparison among selected working fluids shows that ammonia is the best fluid in terms of net power generation and compactness of turbo-machineries, whereas n-Pentane is the best fluid in terms of thermal efficiency and heat exchanger compactness. Both are recommended as working fluids for ORC installations in India. The study reveals that there is a great opportunity to employ this technology in India provided we have to overcome some challenges related to component selection, finance and maintenance. - Highlights: • Available waste heat and renewable heat energies, and sinks in India are reviewed. • Suitable working fluids are selected by operational, environmental and safety criteria. • A feasibility study and comparison of selected fluids are presented for Indian climates. • Ammonia and n-Pentane are recommended for ORC installation in India. • Challenges related to plant component, operation and cost are discussed.

  14. A Structured Approach to Teaching Applied Problem Solving through Technology Assessment.

    Science.gov (United States)

    Fischbach, Fritz A.; Sell, Nancy J.

    1986-01-01

    Describes an approach to problem solving based on real-world problems. Discusses problem analysis and definitions, preparation of briefing documents, solution finding techniques (brainstorming and synectics), solution evaluation and judgment, and implementation. (JM)

  15. Expected value based fuzzy programming approach to solve integrated supplier selection and inventory control problem with fuzzy demand

    Science.gov (United States)

    Sutrisno; Widowati; Sunarsih; Kartono

    2018-01-01

    In this paper, a mathematical model in quadratic programming with fuzzy parameter is proposed to determine the optimal strategy for integrated inventory control and supplier selection problem with fuzzy demand. To solve the corresponding optimization problem, we use the expected value based fuzzy programming. Numerical examples are performed to evaluate the model. From the results, the optimal amount of each product that have to be purchased from each supplier for each time period and the optimal amount of each product that have to be stored in the inventory for each time period were determined with minimum total cost and the inventory level was sufficiently closed to the reference level.

  16. Data Movement Dominates: Advanced Memory Technology to Address the Real Exascale Power Problem

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, Keren

    2014-08-28

    Energy is the fundamental barrier to Exascale supercomputing and is dominated by the cost of moving data from one point to another, not computation. Similarly, performance is dominated by data movement, not computation. The solution to this problem requires three critical technologies: 3D integration, optical chip-to-chip communication, and a new communication model. The central goal of the Sandia led "Data Movement Dominates" project aimed to develop memory systems and new architectures based on these technologies that have the potential to lower the cost of local memory accesses by orders of magnitude and provide substantially more bandwidth. Only through these transformational advances can future systems reach the goals of Exascale computing with a manageable power budgets. The Sandia led team included co-PIs from Columbia University, Lawrence Berkeley Lab, and the University of Maryland. The Columbia effort of Data Movement Dominates focused on developing a physically accurate simulation environment and experimental verification for optically-connected memory (OCM) systems that can enable continued performance scaling through high-bandwidth capacity, energy-efficient bit-rate transparency, and time-of-flight latency. With OCM, memory device parallelism and total capacity can scale to match future high-performance computing requirements without sacrificing data-movement efficiency. When we consider systems with integrated photonics, links to memory can be seamlessly integrated with the interconnection network-in a sense, memory becomes a primary aspect of the interconnection network. At the core of the Columbia effort, toward expanding our understanding of OCM enabled computing we have created an integrated modeling and simulation environment that uniquely integrates the physical behavior of the optical layer. The PhoenxSim suite of design and software tools developed under this effort has enabled the co-design of and performance evaluation photonics-enabled OCM

  17. DECISION ANALYSIS SCIENCE MODELING FOR APPLICATION AND FIELDING SELECTION APPLIED TO EQUIPMENT DISMANTLEMENT TECHNOLOGIES

    International Nuclear Information System (INIS)

    Ebadian, M.A.

    1999-01-01

    The dismantlement of radioactively contaminated process equipment is a major concern during the D and D process. There are an estimated 1,200 buildings in the DOE-EM complex that will require the dismantlement of equipment and various metal structures. As buildings undergo the D and D process, this metallic equipment contaminated with radionuclides such as uranium and plutonium must be size-reduced before final disposal. A single information source comparing dismantlement technologies in the areas of safety, cost, and performance is needed by DOE managers and is not currently available. The selection of the appropriate technologies to meet the dismantlement objectives for a given site is a difficult process in the absence of comprehensive and comparable data. Choosing the wrong technology could result in increased exposure of personnel to contaminants and an increase in D and D project costs. The purpose of this investigation was to evaluate commercially available and innovative technologies for equipment dismantlement and provide a comprehensive source of information to the D and D community in the areas of technology performance, cost, and health and safety

  18. Review of tri-generation technologies: Design evaluation, optimization, decision-making, and selection approach

    International Nuclear Information System (INIS)

    Al Moussawi, Houssein; Fardoun, Farouk; Louahlia-Gualous, Hasna

    2016-01-01

    Highlights: • Trigeneration technologies classified and reviewed according to prime movers. • Relevant heat recovery equipment discussed with thermal energy storage. • Trigeneration evaluated based on energy, exergy, economy, environment criteria. • Design, optimization, and decision-making methods classified and presented. • System selection suggested according to user preferences. - Abstract: Electricity, heating, and cooling are the three main components constituting the tripod of energy consumption in residential, commercial, and public buildings all around the world. Their separate generation causes higher fuel consumption, at a time where energy demands and fuel costs are continuously rising. Combined cooling, heating, and power (CCHP) or trigeneration could be a solution for such challenge yielding an efficient, reliable, flexible, competitive, and less pollutant alternative. A variety of trigeneration technologies are available and their proper choice is influenced by the employed energy system conditions and preferences. In this paper, different types of trigeneration systems are classified according to the prime mover, size and energy sequence usage. A leveled selection procedure is subsequently listed in the consecutive sections. The first level contains the applied prime mover technologies which are considered to be the heart of any CCHP system. The second level comprises the heat recovery equipment (heating and cooling) of which suitable selection should be compatible with the used prime mover. The third level includes the thermal energy storage system and heat transfer fluid to be employed. For each section of the paper, a survey of conducted studies with CHP/CCHP implementation is presented. A comprehensive table of evaluation criteria for such systems based on energy, exergy, economy, and environment measures is performed, along with a survey of the methods used in their design, optimization, and decision-making. Moreover, a classification

  19. A Case Study of Controlling Crossover in a Selection Hyper-heuristic Framework Using the Multidimensional Knapsack Problem.

    Science.gov (United States)

    Drake, John H; Özcan, Ender; Burke, Edmund K

    2016-01-01

    Hyper-heuristics are high-level methodologies for solving complex problems that operate on a search space of heuristics. In a selection hyper-heuristic framework, a heuristic is chosen from an existing set of low-level heuristics and applied to the current solution to produce a new solution at each point in the search. The use of crossover low-level heuristics is possible in an increasing number of general-purpose hyper-heuristic tools such as HyFlex and Hyperion. However, little work has been undertaken to assess how best to utilise it. Since a single-point search hyper-heuristic operates on a single candidate solution, and two candidate solutions are required for crossover, a mechanism is required to control the choice of the other solution. The frameworks we propose maintain a list of potential solutions for use in crossover. We investigate the use of such lists at two conceptual levels. First, crossover is controlled at the hyper-heuristic level where no problem-specific information is required. Second, it is controlled at the problem domain level where problem-specific information is used to produce good-quality solutions to use in crossover. A number of selection hyper-heuristics are compared using these frameworks over three benchmark libraries with varying properties for an NP-hard optimisation problem: the multidimensional 0-1 knapsack problem. It is shown that allowing crossover to be managed at the domain level outperforms managing crossover at the hyper-heuristic level in this problem domain.

  20. Selected Problems of Sensitivity and Reliability of a Jack-Up Platform

    Directory of Open Access Journals (Sweden)

    Rozmarynowski Bogdan

    2018-03-01

    Full Text Available The paper deals with sensitivity and reliability applications to numerical studies of an off-shore platform model. Structural parameters and sea conditions are referred to the Baltic jack-up drilling platform. The sudy aims at the influence of particular basic variables on static and dynamic response as well as the probability of failure due to water waves and wind loads. The paper presents the sensitivity approach to a generalized eigenvalue problem and evaluation of the performace functions. The first order time-invariant problems of structural reliability analysis are under concern.

  1. Organic Ferroelectric-Based 1T1T Random Access Memory Cell Employing a Common Dielectric Layer Overcoming the Half-Selection Problem.

    Science.gov (United States)

    Zhao, Qiang; Wang, Hanlin; Ni, Zhenjie; Liu, Jie; Zhen, Yonggang; Zhang, Xiaotao; Jiang, Lang; Li, Rongjin; Dong, Huanli; Hu, Wenping

    2017-09-01

    Organic electronics based on poly(vinylidenefluoride/trifluoroethylene) (P(VDF-TrFE)) dielectric is facing great challenges in flexible circuits. As one indispensable part of integrated circuits, there is an urgent demand for low-cost and easy-fabrication nonvolatile memory devices. A breakthrough is made on a novel ferroelectric random access memory cell (1T1T FeRAM cell) consisting of one selection transistor and one ferroelectric memory transistor in order to overcome the half-selection problem. Unlike complicated manufacturing using multiple dielectrics, this system simplifies 1T1T FeRAM cell fabrication using one common dielectric. To achieve this goal, a strategy for semiconductor/insulator (S/I) interface modulation is put forward and applied to nonhysteretic selection transistors with high performances for driving or addressing purposes. As a result, high hole mobility of 3.81 cm 2 V -1 s -1 (average) for 2,6-diphenylanthracene (DPA) and electron mobility of 0.124 cm 2 V -1 s -1 (average) for N,N'-1H,1H-perfluorobutyl dicyanoperylenecarboxydiimide (PDI-FCN 2 ) are obtained in selection transistors. In this work, we demonstrate this technology's potential for organic ferroelectric-based pixelated memory module fabrication. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. The new framework for resolving the energy problem and its application to the utilization of nuclear technology

    International Nuclear Information System (INIS)

    Kurata, Kenji

    2002-01-01

    Until recently, the energy problem in Japan had been the problem of how enough energy could be supplied to various sectors in society under Japan's conditions of only a few energy resources existing within its territory. However, recently new environmental and social conditions are arising. These new conditions strongly affect not only concrete measures for solving the energy problem but also the characteristics of the energy problem itself. Nowadays, it seems to be impossible to resolve the energy problem without taking these conditions into consideration. For this reason, a new framework, which enables various social values to be reflected in concrete measures, is urgently needed to resolve the energy problem. This thesis uses the ISO14001 framework to consider a possible solution over the energy problem. In the first part of this thesis, an examination shows that the ISO14001 framework should be generalized beyond the original objective of dealing with environmental problems to accommodate any kind of problems caused by newly arising social values. This generalized framework is defined as a 'Social measure' and expected to enhance the resolution of the problem in socially appropriate manner. In the second part, this paper uses the idea of the Social measure to consider a possible solution to recover public trust on the utilization of nuclear technology, which is regarded as a typical energy problem under the social condition. (author)

  3. From Socialisation to Internalisation: Cultivating Technological Pedagogical Content Knowledge through Problem-Based Learning

    Science.gov (United States)

    Tee, Meng Yew; Lee, Shuh Shing

    2011-01-01

    Recent studies on technology have shifted from the emphasis on technology skills alone to integrating pedagogy and content with technology--what Mishra and Koehler (2005) call technological pedagogical content knowledge (TPACK). Deeper understanding on how TPACK can be cultivated is needed. This design-based research explored how an improvised,…

  4. PROGRAMMED LEARNING--THEORY AND RESEARCH, AN ENDURING PROBLEM IN PSYCHOLOGY. SELECTED READINGS.

    Science.gov (United States)

    MOORE, J. WILLIAM, ED.; SMITH, WENDELL I., ED.

    THIS IS A COMPILATION OF ARTICLES DEALING WITH PROGRAMED INSTRUCTION AND AUTO-INSTRUCTIONAL DEVICES (TEACHING-MACHINES). THE LITERATURE IS REVIEWED AND AN OVERVIEW OF THE FIELD IS PRESENTED. THE APPLICATION OF INSTRUCTIONAL TECHNOLOGY AND LEARNING THEORY TO TEACHING MACHINES IS DISCUSSED, AND THE PROCEDURE AND RULES OF PROGRAMING METHOD. SAMPLES…

  5. Selecting information technology for physicians' practices: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Eden Karen

    2002-04-01

    Full Text Available Abstract Background Many physicians are transitioning from paper to electronic formats for billing, scheduling, medical charts, communications, etc. The primary objective of this research was to identify the relationship (if any between the software selection process and the office staff's perceptions of the software's impact on practice activities. Methods A telephone survey was conducted with office representatives of 407 physician practices in Oregon who had purchased information technology. The respondents, usually office managers, answered scripted questions about their selection process and their perceptions of the software after implementation. Results Multiple logistic regression revealed that software type, selection steps, and certain factors influencing the purchase were related to whether the respondents felt the software improved the scheduling and financial analysis practice activities. Specifically, practices that selected electronic medical record or practice management software, that made software comparisons, or that considered prior user testimony as important were more likely to have perceived improvements in the scheduling process than were other practices. Practices that considered value important, that did not consider compatibility important, that selected managed care software, that spent less than $10,000, or that provided learning time (most dramatic increase in odds ratio, 8.2 during implementation were more likely to perceive that the software had improved the financial analysis process than were other practices. Conclusion Perhaps one of the most important predictors of improvement was providing learning time during implementation, particularly when the software involves several practice activities. Despite this importance, less than half of the practices reported performing this step.

  6. Introducing a technology-enabled problem-based learning approach into a health informatics curriculum.

    Science.gov (United States)

    Green, Carolyn J; van Gyn, Geraldine H; Moehr, Jochen R; Lau, Francis Y; Coward, Patricia M

    2004-03-18

    To investigate the effect on learner satisfaction of introducing a technology-enabled problem-based learning (PBL) approach into a health informatics curriculum. Course redesign was undertaken to prepare students for three 4-month work terms and a rapidly changing professional environment upon graduation. Twenty-six Canadian undergraduate students of a redesigned course in biomedical fundamentals completed a midterm questionnaire in 2002. Eight of these students participated in a focus group. Students agreed that seven of nine functions provided by the web-based online course management system enhanced their learning: private email (92.3%), calendaring (88.5%), course notes (88.5%), discussion forums (84.5%), online grades (84.5%) assignment descriptions (80.8%) and online quizzes (80.8%). Although students agreed that two PBL activities enhanced learning (learning to present information) (84.5%) and learning to identify information needed (73.1%), the majority of students (69.2%) expressed a preference for the traditional lecture approach over the PBL approach. Students reported feeling uncertain of what was required of them and related anxiety accounted for most of the negative feedback. These findings give us clear goals for improvement in the course beginning with a comprehensive, carefully guided introduction to the processes of PBL. The positive trends are encouraging for the use of web-enabled courseware and for the further development of the PBL approach.

  7. Problem Solving Strategies of Selected Pre-Service Secondary School Mathematics Teachers in Malaysia

    Science.gov (United States)

    Yew, Wun Theam; Zamri, Sharifah Norul Akmar Syed

    2016-01-01

    Problem solving strategies of eight pre-service secondary school mathematics teachers (PSSMTs) were examined in this study. A case study research design was employed and clinical interview technique was used to collect the data. Materials collected for analysis consisted of audiotapes and videotapes of clinical interviews, subjects' notes and…

  8. Authentic Education by Providing a Situation for Student-Selected Problem-Based Learning

    Science.gov (United States)

    Strimel, Greg

    2014-01-01

    Students are seldom given an authentic experience within school that allows them the opportunity to solve real-life complex engineering design problems that have meaning to their lives and/ or the greater society. They are often confined to learning environments that are limited by the restrictions set by course content for assessment purposes and…

  9. PROBLEMS OF APPLYING FIXED FORMULAE TO SAFETY CRITERIA AND SITE SELECTION

    Energy Technology Data Exchange (ETDEWEB)

    Davis, W. K.

    1963-10-15

    The problem of developing a formula or calculation procedure for that could more-or-less automatically indicate whether or not a nuclear plant would be considered safe at a particular location is discussed. The difficulties and impossibilities of any sach formula for making decisions on siting and safety involving large amounts of money and public safety are considered. (P.C.H.)

  10. Study of selected problems of reliability of the supply chain in the trading company

    Directory of Open Access Journals (Sweden)

    2010-06-01

    Full Text Available The paper presents the problems of the reliability of the supply chain as a whole in the dependence on the reliability of its elements. Different variants of reserving of canals (prime and reserve ones and issues connected with their switching are discussed.

  11. Criteria and indicators of the effective application of problem-based learning technologies in teaching at college

    OpenAIRE

    Shikhova A.T.

    2017-01-01

    this article deals with «the efficiency of the educational process» and «criterion» concepts and the term «indicators». The author designated the requirements for evaluating the criteria of the effectiveness of developed problem-based learning technology at college and showed the most important options of evaluating the effectiveness of problem-based learning technologies implementation in teaching at college, from his point of view. The list of indicated parameters can serve as a mean of eva...

  12. Selecting appropriate wastewater treatment technologies using a choosing-by-advantages approach.

    Science.gov (United States)

    Arroyo, Paz; Molinos-Senante, María

    2018-06-01

    Selecting the most sustainable wastewater treatment (WWT) technology among possible alternatives is a very complex task because the choice must integrate economic, environmental, and social criteria. Traditionally, several multi-criteria decision-making approaches have been applied, with the most often used being the analytical hierarchical process (AHP). However, AHP allows users to offset poor environmental and/or social performance with low cost. To overcome this limitation, our study examines a choosing-by-advantages (CBA) approach to rank seven WWT technologies for secondary WWT. CBA results were compared with results obtained by using the AHP approach. The rankings of WWT alternatives differed, depending on whether the CBA or AHP approach was used, which highlights the importance of the method used to support decision-making processes, particularly ones that rely on subjective interpretations by experts. This paper uses a holistic perspective to demonstrate the benefits of using the CBA approach to support a decision-making process when a group of experts must come to a consensus in selecting the most suitable WWT technology among several available. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Risk-Informed Decision Making: Application to Technology Development Alternative Selection

    Science.gov (United States)

    Dezfuli, Homayoon; Maggio, Gaspare; Everett, Christopher

    2010-01-01

    NASA NPR 8000.4A, Agency Risk Management Procedural Requirements, defines risk management in terms of two complementary processes: Risk-informed Decision Making (RIDM) and Continuous Risk Management (CRM). The RIDM process is used to inform decision making by emphasizing proper use of risk analysis to make decisions that impact all mission execution domains (e.g., safety, technical, cost, and schedule) for program/projects and mission support organizations. The RIDM process supports the selection of an alternative prior to program commitment. The CRM process is used to manage risk associated with the implementation of the selected alternative. The two processes work together to foster proactive risk management at NASA. The Office of Safety and Mission Assurance at NASA Headquarters has developed a technical handbook to provide guidance for implementing the RIDM process in the context of NASA risk management and systems engineering. This paper summarizes the key concepts and procedures of the RIDM process as presented in the handbook, and also illustrates how the RIDM process can be applied to the selection of technology investments as NASA's new technology development programs are initiated.

  14. Measuring Teaching Quality in Higher Education : Assessing the Problem of Selection Bias in Course Evaluations

    NARCIS (Netherlands)

    Salomons, Anna; Goos, Maarten

    2014-01-01

    Student evaluations of teaching are widely used to measure teaching quality and compare it across different courses, teachers, departments and institutions: as such, they are of increasing importance for teacher promotion decisions as well as student course selection. However, the response on course

  15. A Bayesian way to solve the pdf selection problem an application in geotechnical analysis

    NARCIS (Netherlands)

    Kerstens, J.G.M.

    2007-01-01

    Single probability density functions (pdf) are often selected based on a best-fit approach or the minimum description length (MDL) theorem that finds its description by the theory of complexity by Kolmogorov. However, it often occurs that random data cannot be accurately described by any of the

  16. Principal Stratification in sample selection problems with non normal error terms

    DEFF Research Database (Denmark)

    Rocci, Roberto; Mellace, Giovanni

    The aim of the paper is to relax distributional assumptions on the error terms, often imposed in parametric sample selection models to estimate causal effects, when plausible exclusion restrictions are not available. Within the principal stratification framework, we approximate the true distribut...... an application to the Job Corps training program....

  17. Self-Regulatory Strategies in Daily Life: Selection, Optimization, and Compensation and Everyday Memory Problems

    Science.gov (United States)

    Robinson, Stephanie A.; Rickenbach, Elizabeth H.; Lachman, Margie E.

    2016-01-01

    The effective use of self-regulatory strategies, such as selection, optimization, and compensation (SOC) requires resources. However, it is theorized that SOC use is most advantageous for those experiencing losses and diminishing resources. The present study explored this seeming paradox within the context of limitations or constraints due to…

  18. A Hybrid Heuristic Approach to Provider Selection and Task Allocation Problem in Telecommunications with Varying QoS Levels

    Directory of Open Access Journals (Sweden)

    Nihat Kasap

    2017-01-01

    Full Text Available In this research, we study a cost minimization problem for a firm that acquires capacity from providers to accomplish daily operations on telecommunication networks. We model the related optimization problem considering quality of service and capacity requirements and offer a solution approach based on genetic algorithm (GA. Our model reckons the tradeoff between the network capacity acquisition cost and opportunity cost arise when data transmission quality for real-time tasks manifested at undesired levels. To better represent the related features and complexities, we model both capacity and loss probability requirements explicitly, and then, formulate delay and jitter requirements as level matching constraints. Using an experimental framework, we analyze how optimal behavior of the firm is affected by different price schemes, transmission quality and task distributions. We also compare three GA based heuristic solution approaches and comment on the suitability of them on resource selection and task allocation problems.

  19. The 3rd ATLAS Domestic Standard Problem for Improvement of Safety Analysis Technology

    International Nuclear Information System (INIS)

    Choi, Ki-Yong; Kang, Kyoung-Ho; Park, Yusun; Kim, Jongrok; Bae, Byoung-Uhn; Choi, Nam-Hyun

    2014-01-01

    The third ATLAS DSP (domestic standard problem exercise) was launched at the end of 2012 in response to the strong need for continuation of the ATLAS DSP. A guillotine break of a main steam line without LOOP at a zero power condition was selected as a target scenario, and it was successfully completed in the beginning of 2014. In the 3 rd ATLAS DSP, comprehensive utilization of the integral effect test data was made by dividing analysis with three topics; 1. scale-up where extrapolation of ATLAS IET data was investigated 2. 3D analysis where how much improvement can be obtained by 3D modeling was studied 3. 1D sensitivity analysis where the key phenomena affecting the SLB simulation were identified and the best modeling guideline was achieved. Through such DSP exercises, it has been possible to effectively utilize high-quality ATLAS experimental data of to enhance thermal-hydraulic understanding and to validate the safety analysis codes. A strong human network and technical expertise sharing among the various nuclear experts are also important outcomes from this program

  20. An investigation into electromagnetic force models: differences in global and local effects demonstrated by selected problems

    Science.gov (United States)

    Reich, Felix A.; Rickert, Wilhelm; Müller, Wolfgang H.

    2018-03-01

    This study investigates the implications of various electromagnetic force models in macroscopic situations. There is an ongoing academic discussion which model is "correct," i.e., generally applicable. Often, gedankenexperiments with light waves or photons are used in order to motivate certain models. In this work, three problems with bodies at the macroscopic scale are used for computing theoretical model-dependent predictions. Two aspects are considered, total forces between bodies and local deformations. By comparing with experimental data, insight is gained regarding the applicability of the models. First, the total force between two cylindrical magnets is computed. Then a spherical magnetostriction problem is considered to show different deformation predictions. As a third example focusing on local deformations, a droplet of silicone oil in castor oil is considered, placed in a homogeneous electric field. By using experimental data, some conclusions are drawn and further work is motivated.

  1. General Disinfection in Medical and Dental Hospitals, Selection of Disinfectant Type and Problems Encountered

    OpenAIRE

    Akça, Gülin

    2015-01-01

    Hospitals are the places where, either the patients or other health workers can encounter with dangerous problem of several bacterial, fungal, viral, parasitic infectious agents, especially the emerging and life threatening ones such as, methicillin-resistant Staphylococcus aureus (MRSA), vancomycin resistant Enterococcus faecalis (VRE), Stenotrophomonas sp., and multi drug resistant Acinetobacter sp., Pseudomonas sp.. The reasons of these resistant microorganisms that can threaten the life o...

  2. Wavelet and Spectral Analysis of Some Selected Problems in Reactor Diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Sunde, Carl

    2004-12-01

    Both spectral and wavelet analysis were successfully used in various diagnostic problems involving non-stationary core processes in nuclear power reactors. Three different problems were treated: two-phase flow identification, detector tube impacting and core-barrel vibrations. The first two problems are of non-stationary nature, whereas the last one is not. In the first problem, neutron radiographic and visible light images of four different vertical two-phase flow regimes, bubbly, slug, chum and annular flow, were analysed and classified with a neuro-wavelet algorithm. The algorithm consists of a wavelet part, using the 2-D discrete wavelet transform and of an artificial neural network. It classifies the different flow regimes with up to 99% efficiency. Detector tubes in a Boiling Water Reactor may execute vibrations and may also impact on nearby fuel-assemblies. Signals from in-core neutron detectors in Ringhals-1 were analysed, for detection of impacting, with both a classical spectral method and wavelet-based methods. The wavelet methods include both the discrete and the continuous 1-D wavelet transform. It was found that there is agreement between the different methods as well as with visual inspections made during the outage at the plant. However, the wavelet technique has the advantage that it does not require expert judgement for the interpretation of the analysis. In the last part two analytical calculations of the neutron noise, induced by shell-mode core-barrel vibrations, were carried out. The results are in good agreement with calculations from a numerical simulator. An out-of-phase behaviour between in-core and ex-core positions was found, which is in agreement with earlier measurements from the Pressurised Water Reactor Ringhals-3. The results from these calculations are planned to be used when diagnosing the shell-mode core-barrel vibrations in an operating plant.

  3. Wavelet and Spectral Analysis of Some Selected Problems in Reactor Diagnostics

    International Nuclear Information System (INIS)

    Sunde, Carl

    2004-12-01

    Both spectral and wavelet analysis were successfully used in various diagnostic problems involving non-stationary core processes in nuclear power reactors. Three different problems were treated: two-phase flow identification, detector tube impacting and core-barrel vibrations. The first two problems are of non-stationary nature, whereas the last one is not. In the first problem, neutron radiographic and visible light images of four different vertical two-phase flow regimes, bubbly, slug, chum and annular flow, were analysed and classified with a neuro-wavelet algorithm. The algorithm consists of a wavelet part, using the 2-D discrete wavelet transform and of an artificial neural network. It classifies the different flow regimes with up to 99% efficiency. Detector tubes in a Boiling Water Reactor may execute vibrations and may also impact on nearby fuel-assemblies. Signals from in-core neutron detectors in Ringhals-1 were analysed, for detection of impacting, with both a classical spectral method and wavelet-based methods. The wavelet methods include both the discrete and the continuous 1-D wavelet transform. It was found that there is agreement between the different methods as well as with visual inspections made during the outage at the plant. However, the wavelet technique has the advantage that it does not require expert judgement for the interpretation of the analysis. In the last part two analytical calculations of the neutron noise, induced by shell-mode core-barrel vibrations, were carried out. The results are in good agreement with calculations from a numerical simulator. An out-of-phase behaviour between in-core and ex-core positions was found, which is in agreement with earlier measurements from the Pressurised Water Reactor Ringhals-3. The results from these calculations are planned to be used when diagnosing the shell-mode core-barrel vibrations in an operating plant

  4. Decision making tools for selecting sustainable wastewater treatment technologies in Thailand

    Science.gov (United States)

    Wongburi, Praewa; Park, Jae K.

    2018-05-01

    Wastewater consists of valuable resources that could be recovered or reused. Still it is under threat because of ineffective wastewater management and systems. In Thailand, less than 25% of wastewater generated may be treated while then rest is inadequately treated and sent back directly into waterbodies or the environment. Furthermore, the technologies that have been applied may be inefficient and unsustainable. Efficiency, sustainability, and simplicity are important concepts when designing an appropriate wastewater treatment system in developing countries. The objectives of this study were to review and evaluate wastewater treatment technologies and propose a method to improve or select an appropriate technology. An expert system in Excel® program was developed to determine the best solution. Sensitivity analysis was applied to compare and assess uncertainty factors. Due to the different conditions of each area, the key factor of interest was varied. Furthermore, Robust Decision Making tool was applied to determine the best way to improve existing wastewater treatment facility and to choose the most appropriate wastewater treatment technology.

  5. Review of the factors affecting the selection and implementation of waste management technologies

    International Nuclear Information System (INIS)

    1999-08-01

    The objective of this publication is to identify and critically review the factors affecting the selection of waste management strategies and technologies; summarize and discuss the options available, and offer a systematic approach for considering these factors to design, install and operate appropriate technologies for waste streams generated. The scope of this publication includes the management of radioactive waste from all orientations including low and intermediate level waste arising from the production of radionuclides and their application in industry, agriculture, medicine, education and research; waste generated from research reactors, power reactors and from nuclear fuel cycle activities including reprocessing high level waste. Although waste from decommissioning is not specifically addressed, the management of this waste is not significantly different from other types of waste in the same category

  6. Review of the factors affecting the selection and implementation of waste management technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    The objective of this publication is to identify and critically review the factors affecting the selection of waste management strategies and technologies; summarize and discuss the options available, and offer a systematic approach for considering these factors to design, install and operate appropriate technologies for waste streams generated. The scope of this publication includes the management of radioactive waste from all orientations including low and intermediate level waste arising from the production of radionuclides and their application in industry, agriculture, medicine, education and research; waste generated from research reactors, power reactors and from nuclear fuel cycle activities including reprocessing high level waste. Although waste from decommissioning is not specifically addressed, the management of this waste is not significantly different from other types of waste in the same category 32 refs, 11 figs, 12 tabs

  7. Low-level radioactive waste technology: a selected, annotated bibliography. [416 references

    Energy Technology Data Exchange (ETDEWEB)

    Fore, C.S.; Carrier, R.F.; Brewster, R.H.; Hyder, L.K.; Barnes, K.A.

    1981-10-01

    This annotated bibliography of 416 references represents the third in a series to be published by the Hazardous Materials Information Center containing scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on disposal site, environmental transport, and waste treatment studies as well as general reviews on the subject. The publication covers both domestic and foreign literature for the period 1951 to 1981. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology, and Site Resources; Regulatory and Economic Aspects; Social Aspects; Transportation Technology; Waste Production; and Waste Treatment. Entries in each of the chapters are further classified as a field study, laboratory study, theoretical study, or general overview involving one or more of these research areas.

  8. THE PROSPECT OF MODERN TECHNOLOGY IN PHYSICAL EDUCATION PROGRAM: THE WAY TO OVERCOME OVERWEIGHT PROBLEMS IN IRAQ

    OpenAIRE

    Fathil Bakir Allami; Mohdsofian Omar-Fauzee; Ishak Sin

    2016-01-01

    The overweight problem in Iraq has been a great issue that needs to be solved by government to ensure a better well-being. The purpose of this paper is to explore the need of the modern technology in physical education in order to overcome the issues of overweight in Iraq. The methodology used in this paper is through library research which focuses on issues of overweight and modern technology application in physical education programs. It can be concluded that the use of modern technology in...

  9. An Improved SPEA2 Algorithm with Adaptive Selection of Evolutionary Operators Scheme for Multiobjective Optimization Problems

    Directory of Open Access Journals (Sweden)

    Fuqing Zhao

    2016-01-01

    Full Text Available A fixed evolutionary mechanism is usually adopted in the multiobjective evolutionary algorithms and their operators are static during the evolutionary process, which causes the algorithm not to fully exploit the search space and is easy to trap in local optima. In this paper, a SPEA2 algorithm which is based on adaptive selection evolution operators (AOSPEA is proposed. The proposed algorithm can adaptively select simulated binary crossover, polynomial mutation, and differential evolution operator during the evolutionary process according to their contribution to the external archive. Meanwhile, the convergence performance of the proposed algorithm is analyzed with Markov chain. Simulation results on the standard benchmark functions reveal that the performance of the proposed algorithm outperforms the other classical multiobjective evolutionary algorithms.

  10. Effect of Integrated Yoga Module on Selected Psychological Variables among Women with Anxiety Problem.

    Science.gov (United States)

    Parthasarathy, S; Jaiganesh, K; Duraisamy

    2014-01-01

    The implementation of yogic practices has proven benefits in both organic and psychological diseases. Forty-five women with anxiety selected by a random sampling method were divided into three groups. Experimental group I was subjected to asanas, relaxation and pranayama while Experimental group II was subjected to an integrated yoga module. The control group did not receive any intervention. Anxiety was measured by Taylor's Manifest Anxiety Scale before and after treatment. Frustration was measured through Reaction to Frustration Scale. All data were spread in an Excel sheet to be analysed with SPSS 16 software using analysis of covariance (ANCOVA). Selected yoga and asanas decreased anxiety and frustration scores but treatment with an integrated yoga module resulted in significant reduction of anxiety and frustration. To conclude, the practice of asanas and yoga decreased anxiety in women, and yoga as an integrated module significantly improved anxiety scores in young women with proven anxiety without any ill effects.

  11. Selection and Evaluation of Priority Domains in Global Energy Internet Standard Development Based on Technology Foresight

    Science.gov (United States)

    Jin, Yang; Ciwei, Gao; Jing, Zhang; Min, Sun; Jie, Yu

    2017-05-01

    The selection and evaluation of priority domains in Global Energy Internet standard development will help to break through limits of national investment, thus priority will be given to standardizing technical areas with highest urgency and feasibility. Therefore, in this paper, the process of Delphi survey based on technology foresight is put forward, the evaluation index system of priority domains is established, and the index calculation method is determined. Afterwards, statistical method is used to evaluate the alternative domains. Finally the top four priority domains are determined as follows: Interconnected Network Planning and Simulation Analysis, Interconnected Network Safety Control and Protection, Intelligent Power Transmission and Transformation, and Internet of Things.

  12. Selected problems associated with the treatment and care for patients with colostomy – part 2

    OpenAIRE

    Muzyczka, Katarzyna; Kachaniuk, Hanna; Szadowska-Szlachetka, Zdzisława; Charzyńska-Gula, Marianna; Kocka, Katarzyna; Bartoszek, Agnieszka; Celej-Szuster, Jolanta

    2013-01-01

    Generally, ostomy is a purposeful connection of the lumen of the intestine with abdominal integuments by surgery. The study presents practical solutions related to care for the colostomy patient, i.e. an ostomy on the large intestine. The following issues will be discussed: regulating the defecation cycle, risk connected with improper selection of ostomy equipment, instruction on colostomy irrigation with practical advice and irrigation equipment supply. The knowledge of these rules and maste...

  13. The role of scenario, deontic conditionals and problem content in Wason´s selection task

    OpenAIRE

    Martín, Montserrat; Valiña, María Dolores; Evans, Jonathan St. B. T.

    2014-01-01

    This paper was presented at "The European Conference on Cognitive Science. Siena, Italy, October 1999" This experiment explores the influence of thematic content, the presence or absence of a scenario and the use of deontic or indicative framing of conditional rules on performance on Wason’s selection task. Logical performance was affected by the content used (permission rules were the best, neutral the worst and obligation rules intermediate) and by the use of scenario...

  14. Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology.

    Science.gov (United States)

    Chen, Jianyu; Zhang, Zhiguang; Chen, Xianshuai; Zhang, Chunyu; Zhang, Gong; Xu, Zhewu

    2014-11-01

    Recently a new therapeutic concept of patient-specific implant dentistry has been advanced based on computer-aided design/computer-aided manufacturing technology. However, a comprehensive study of the design and 3-dimensional (3D) printing of the customized implants, their mechanical properties, and their biomechanical behavior is lacking. The purpose of this study was to evaluate the mechanical and biomechanical performance of a novel custom-made dental implant fabricated by the selective laser melting technique with simulation and in vitro experimental studies. Two types of customized implants were designed by using reverse engineering: a root-analog implant and a root-analog threaded implant. The titanium implants were printed layer by layer with the selective laser melting technique. The relative density, surface roughness, tensile properties, bend strength, and dimensional accuracy of the specimens were evaluated. Nonlinear and linear finite element analysis and experimental studies were used to investigate the stress distribution, micromotion, and primary stability of the implants. Selective laser melting 3D printing technology was able to reproduce the customized implant designs and produce high density and strength and adequate dimensional accuracy. Better stress distribution and lower maximum micromotions were observed for the root-analog threaded implant model than for the root-analog implant model. In the experimental tests, the implant stability quotient and pull-out strength of the 2 types of implants indicated that better primary stability can be obtained with a root-analog threaded implant design. Selective laser melting proved to be an efficient means of printing fully dense customized implants with high strength and sufficient dimensional accuracy. Adding the threaded characteristic to the customized root-analog threaded implant design maintained the approximate geometry of the natural root and exhibited better stress distribution and

  15. Research and technology strategy to help overcome the environmental problems in relation to transport

    International Nuclear Information System (INIS)

    Martin, D.J.; Michaelis, L.A.

    1992-03-01

    This report considers global pollution issues, i.e. emissions which are of significance to global warming and stratospheric ozone depletion, and the following technology clusters: alternative fuels, engine technology and vehicle design

  16. Sensitive Wavelengths Selection in Identification of Ophiopogon japonicus Based on Near-Infrared Hyperspectral Imaging Technology

    Directory of Open Access Journals (Sweden)

    Zhengyan Xia

    2017-01-01

    Full Text Available Hyperspectral imaging (HSI technology has increasingly been applied as an analytical tool in fields of agricultural, food, and Traditional Chinese Medicine over the past few years. The HSI spectrum of a sample is typically achieved by a spectroradiometer at hundreds of wavelengths. In recent years, considerable effort has been made towards identifying wavelengths (variables that contribute useful information. Wavelengths selection is a critical step in data analysis for Raman, NIRS, or HSI spectroscopy. In this study, the performances of 10 different wavelength selection methods for the discrimination of Ophiopogon japonicus of different origin were compared. The wavelength selection algorithms tested include successive projections algorithm (SPA, loading weights (LW, regression coefficients (RC, uninformative variable elimination (UVE, UVE-SPA, competitive adaptive reweighted sampling (CARS, interval partial least squares regression (iPLS, backward iPLS (BiPLS, forward iPLS (FiPLS, and genetic algorithms (GA-PLS. One linear technique (partial least squares-discriminant analysis was established for the evaluation of identification. And a nonlinear calibration model, support vector machine (SVM, was also provided for comparison. The results indicate that wavelengths selection methods are tools to identify more concise and effective spectral data and play important roles in the multivariate analysis, which can be used for subsequent modeling analysis.

  17. Identification of ligand-selective peptidic ActRIIB-antagonists using phage display technology

    Directory of Open Access Journals (Sweden)

    Kotaro Sakamoto

    2017-09-01

    Full Text Available ActRIIB (activin receptor type-2B is an activin receptor subtype constitutively expressed in the whole body, playing a role in cellular proliferation, differentiation, and metabolism. For its various physiological activities, ActRIIB interacts with activin and multiple other ligands including myostatin (MSTN, growth differentiation factor 11 (GDF11, and bone morphogenetic protein 9 (BMP9. Notably, the protein-protein interaction (PPI between ActRIIB and MSTN negatively controls muscular development. Therefore, this PPI has been targeted for effective treatment of muscle degenerative diseases such as muscular dystrophy and sarcopenia. Here, we report the identification of ligand-selective peptidic ActRIIB-antagonists by phage display technology. Our peptides bound to the extracellular domain of ActRIIB, inhibited PPIs between ActRIIB expressed on the cell surface and its ligands, and subsequently suppressed activation of Smad that serves as the downstream signal of the ActRIIB pathway. Interestingly, these peptidic antagonists displayed different ligand selectivities; the AR2mini peptide inhibited multiple ligands (activin A, MSTN, GDF11, and BMP9, AR9 inhibited MSTN and GDF11, while AR8 selectively inhibited MSTN. This is the first report of artificial peptidic ActRIIB-antagonists possessing ligand-selectivity.

  18. MODERN PROBLEMS OF THE INFLUENCE OF SCIENTIFIC AND TECHNOLOGICAL PROGRESS ON EMPLOYMENT

    Directory of Open Access Journals (Sweden)

    David Powell

    2015-01-01

    Full Text Available This article addresses concerns about the impact of technological development on employment. Over recent centuries, innovation has been a driver of technological development and automation, giving rise to fears of an economic disaster where machines increasingly replace workers and there is high unemployment. Despite claims that the idea of permanently high unemployment caused by technological development, "technological unemployment", is discredited, there is good reason to believe that recent trends make Luddite concerns today more valid.

  19. Transition from Realistic to Real World Problems with the Use of Technology in Elementary Mathematical Education

    Science.gov (United States)

    Budinski, Natalija; Milinkovic, Dragica

    2017-01-01

    The availability of technology has a big impact on education, and that is the main reason for discussing the use of technologies in mathematical education in our paper. The availability of technology influences how mathematical contents could be presented to students. We present the benefits of learning mathematical concepts through real life…

  20. Selected problems relating to the dynamics of block-type foundations for machines

    Directory of Open Access Journals (Sweden)

    Marek Zombroń

    2014-07-01

    Full Text Available Atypical but real practical problems relating to the dynamics of block-type foundations for machines are considered using the deterministic approach and assuming that the determined parameters are random variables. A foundation model in the form of an undeformable solid on which another undeformable solid modelling a machine is mounted via viscoelastic constraints was adopted. The dynamic load was defined by a harmonically varying signal and by a series of short duration signals. The vibration of the system was investigated for the case when stratified ground (groundwater occurred within the side backfill was present. Calculation results illustrating the theoretical analyses are presented.