WorldWideScience

Sample records for technology selected articles

  1. Laser technology (selected articles)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-09

    This paper presents high-energy CW HF/DF chemical lasers developed under the U.S. Navy Sealite program and the Alpha program of the DARPA Triad program, and a brief account of Soviet chemical lasers. Continuous wave HF/DF chemical lasers were developed starting in the late sixties as high-power lasers of consistent interest to military circles. These are lasers that have the most matured technology among present-day high-energy lasers. It is hoped that in the near future CW HF/DF chemical lasers can be developed into a space laser weapon to deal with ICBMs. CW HF/DF chemical lasers are an integration of technologies in gas dynamics, chemistry, fluid chemistry, optics, and lasers. By using the branching chain reaction of heat liberation, inversion of the population ratio is generated to obtain lasers.

  2. STOMATOLOGICAL JOURNAL (SELECTED ARTICLES).

    Science.gov (United States)

    This article discusses the clinical symptoms of lithiasis of the parotid salivary gland, examination methods that allow detection of sialoliths... lithiasis treated at the Dental Surgery Clinic at Zabrze are summarized: 88% of all salivary gland lithiasis is submaxillary; it appears most frequently

  3. International Aviation (Selected Articles)

    Science.gov (United States)

    1991-04-25

    guests and thC-q f IDUSInESS! r-r and toUri *LtS 4.I GENERAL DESCRIPTIO0I17 The CFTRC currently enploys about 2000 engineeis and technii:, includinr...development of a modified version. The first stage of flight testing for this plane has already been completed. The flight testing, in both flight...completed many .LLiht Szting a.-eth’ds nd easurernent technology, as well a full serie-s of flyinoc test planes and surface simulation Eq:, .. en t , a

  4. Polyseme selection, lemma selection and article selection

    DEFF Research Database (Denmark)

    Bergenholtz, Henning; Gouws, Rufus

    2017-01-01

    , in the case of dictionaries for text reception, should abolish the traditional distinction between homonyms as well as the presentation of the different senses of a polysemous word in a single article. Each meaning, whether the only meaning of a lexical item or one of any number of different senses, should...... be the only item giving the meaning in an article....

  5. The Adlerian Approach: Selected Articles.

    Science.gov (United States)

    Bullard, Maurice L.; And Others

    Several articles are concerned entirely with explicating some of the core Adlerian principles which center, ultimately, on the purposiveness of all human behavior. Among the theoretical topics included are: (1) a conflict solving strategy; (2) the characteristics of the family constellation; and (3) the implications of misbehavior viewed as having…

  6. Acta Genetica Sinica (Selected Articles),

    Science.gov (United States)

    1986-04-04

    0879-8SF/ /3 N IT 0󈧬 112. MIRCK L~~Nj~ %. *- - - - - - - - -I.. * .. - II , I FTD-ID(RS)T-0879-85 oM FOREIGN TECHNOLOGY DIVISION ACTA GENETICA SINICA...34 ’ ° ° ° !4 :A.. it.i FTD- ID(RS)T-0879-85 HUMAN TRANSLATION FTD-ID(RS)T-0879-85 4 April 1986 MICROFICHE NR: FTD-86-C-001691 ACTA GENETICA SINICA...merged into this translation were extracted from the best quality copy available. •i 12 (2): 93-101, 1985 Yichuan Xuebao (Acta Genetica Sinica) Genetic

  7. RESEARCH ARTICLE Biodiversity and selection for scrapie ...

    Indian Academy of Sciences (India)

    RESEARCH ARTICLE. Biodiversity and selection for scrapie ... Chiappini Barbara. Department of Food Safety, Nutrition and Veterinary Public Health, Istituto Superiore di Sanità,. 00161 Rome .... 90" at 72°C for 35 cycles, 4' 72°C ). Primers and dNTPs were removed enzymatically, incubating 15µl of PCR product with 1.7µl.

  8. Selective Reproductive Technologies

    DEFF Research Database (Denmark)

    Gammeltoft, Tine; Wahlberg, Ayo

    2014-01-01

    selective reproduction has been placed under the aegis of science and expertise in novel ways. New laboratory and clinical techniques allow for the selective fertilization of gametes, implantation of embryos, or abortion of fetuses. Although they will often overlap with assisted reproductive technologies......From a historical perspective, selective reproduction is nothing new. Infanticide, abandonment, and selective neglect of children have a long history, and the widespread deployment of sterilization and forced abortion in the twentieth century has been well documented. Yet in recent decades...... (ARTs), what we term selective reproductive technologies (SRTs) are of a more specific nature: Rather than aiming to overcome infertility, they are used to prevent or allow the birth of certain kinds of children. This review highlights anthropological research into SRTs in different parts of the world...

  9. Identifying emerging trends for implementing learning technology in special education: a state-of-the-art review of selected articles published in 2008-2012.

    Science.gov (United States)

    Liu, Gi-Zen; Wu, No-Wei; Chen, Yi-Wen

    2013-10-01

    As electronic learning (e-learning) becomes increasingly popular in education worldwide, learning technology (LT) has been applied in various learning environments and activities to promote meaningful, efficient, and effective learning. LT has also been adopted by researchers and teacher-practitioners in the field of special education, but as yet little review-based research has been published. This review research thus carefully examined the trends of LT implementations in special education, providing a comprehensive analysis of 26 studies published in indexed journals in the past five years (2008-2012). Two research questions were addressed: (a) What are the major research aims, methodologies, and outcomes in these studies of implementing LT in the field of special education? and (b) What types of LT are mainly used with special education students, and for what kinds of students? Major findings include that examining the learning effectiveness of LT using was the most common research purpose (75%); researchers primarily relied on experimental studies (46%, 12 studies), followed by interviews and questionnaires (19%, 5 studies). Moreover, the most common use of LT was computer-assisted technology (such as web-based mentoring, educational computer games, laptop computers) in special education; studies investigating the use of LT with mentally disabled students were more than those with physically disabled ones. It is expected that the findings of this work and their implications will serve as valuable references with regard to the use of LT with special education students. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Nanjing University General Information (Selected Articles).

    Science.gov (United States)

    1982-12-10

    7 AD-A123.941 NANJING UNIVERSIT GENERAL INFORMATION (SELECTED ARICLESH U) FORESN T CHNOLO0Y 0IV RIOHT-PATTERSON AR OH , 0 EC .2 0 DDRS)T-0ROR-2...Astronomy. .. ........................ 5 Department of Mathematics. .. .................. ..... 8 Department of Computer Science. .. .................... 11... computer science, physics, chemistry, biology, geology, geography and meteorology. In addition, it also accommodates two research and teaching offices

  11. PREPARATION OF A POLYMER ARTICLE FOR SELECTIVE METALLIZATION

    DEFF Research Database (Denmark)

    2008-01-01

    The present invention relates to the field of selective metallization, and in particular to preparing a polymer article for selective metallization by submerging the article in a first liquid, and while submergedirradiate the article by a laser beam the area of the article on which the metal...... is to be deposited. An activation step, prior to the selective metallization, comprises submerging the article in an activation liquid for depositing seedparticles in the selected area. The irradiation of the selected area is proportionate so as to cause a temporary meltingof the polymer in the surface...... of the selected area of the polymer article. The invention is advantageous in that the preparation may be performed with a relatively high scan rate across the polymer article, and in that a quite limited use of toxic chemicals....

  12. Selected Soccer and Speedball Articles. Sports Articles Reprint Series. Third Edition.

    Science.gov (United States)

    Boyce, Roberta, Ed.; Lowe, Billye J., Ed.

    Presented is a collection of articles by outstanding authorities on soccer and speedball for girls and women. The articles were selected from 1958-72 "Division for Girls and Women's Sports Guides." Articles are organized under a) Lead-up and Modified Games, b) Teaching and Coaching Techniques, and c) Evaluation and Officiating. (Author/JB)

  13. Selecting Security Technology Providers

    Science.gov (United States)

    Schneider, Tod

    2009-01-01

    The world of security technology holds great promise, but it is fraught with opportunities for expensive missteps and misapplications. The quality of the security technology consultants and system integrators one uses will have a direct bearing on how well his school masters this complex subject. Security technology consultants help determine…

  14. Article

    African Journals Online (AJOL)

    Nelson Edewor

    Abstract. The changing nature of library services and the advent of social media network technology have created emphasis on its usage in academic institutions. Librarians are using the latest social media technology in marketing their information products and services to the library patrons. The aim of this study is ...

  15. HOW TO SELECT APPROPRIATE STATISTICAL TEST IN SCIENTIFIC ARTICLES

    Directory of Open Access Journals (Sweden)

    Vladimir TRAJKOVSKI

    2016-09-01

    Full Text Available Statistics is mathematical science dealing with the collection, analysis, interpretation, and presentation of masses of numerical data in order to draw relevant conclusions. Statistics is a form of mathematical analysis that uses quantified models, representations and synopses for a given set of experimental data or real-life studies. The students and young researchers in biomedical sciences and in special education and rehabilitation often declare that they have chosen to enroll that study program because they have lack of knowledge or interest in mathematics. This is a sad statement, but there is much truth in it. The aim of this editorial is to help young researchers to select statistics or statistical techniques and statistical software appropriate for the purposes and conditions of a particular analysis. The most important statistical tests are reviewed in the article. Knowing how to choose right statistical test is an important asset and decision in the research data processing and in the writing of scientific papers. Young researchers and authors should know how to choose and how to use statistical methods. The competent researcher will need knowledge in statistical procedures. That might include an introductory statistics course, and it most certainly includes using a good statistics textbook. For this purpose, there is need to return of Statistics mandatory subject in the curriculum of the Institute of Special Education and Rehabilitation at Faculty of Philosophy in Skopje. Young researchers have a need of additional courses in statistics. They need to train themselves to use statistical software on appropriate way.

  16. Article

    African Journals Online (AJOL)

    - formed consent from study participants.8. More than 500 journals around the world have responded and adopted the requirements of the ICMJE.9 As a result the number of articles reporting informed consent in clinical trials increased from.

  17. ARTICLES

    African Journals Online (AJOL)

    ARTICLES. NEONATAL VITAMIN A. SUPPLEMENTATION. Jean Humphrey. Vitamin A deficiency is a major public health problem throughout the developing world, affecting an estimated 124 million young children and accounting for more than 1 million child deaths each year.' A meta-analysis of eight controlled.

  18. ARTICLES

    African Journals Online (AJOL)

    ARTICLES. ,i. INTRAVASCULAR CATHETER. SEPSIS. Mervyn Mer. Intravascular devices are an integral component of modern-day medical practice. They are used to administer intravenous fluids, medications, blood products and parenteral nutrition. In addition, they serve as a valuable monitor of the haemo- dynamic ...

  19. Article

    African Journals Online (AJOL)

    I also thank Professor Julia Sloth-Nielsen of the Faculty of Law, UWC, and Mr Lukas Muntingh of CSPRI for their valuable comments on the. 2007 version of this article. OSF-SA and Ford Foundation's funding to. CSPRI and CLC is acknowledged. The usual caveats apply. References. 1. For example, there was much interest ...

  20. Article

    African Journals Online (AJOL)

    FUTLIB12

    E-resources have enhanced the learning process to students by providing relevant information for their academic activities. Use of Electronic Information Resources by Postgraduate. Students of Universities in North Central Nigeria. Article https://dx.doi.org/10.4314/iijikm.v8i3.6. Information Impact: Journal of Information and.

  1. articles

    African Journals Online (AJOL)

    2011-12-04

    Dec 4, 2011 ... Google Scholar, African Journals Online (AJOL), and archives of the Nigerian Journal of Psychiatry. Six articles included content relating to age of the child at first presentation to orthodox clinical practice and symptoms at presentation related to expressive language ability and therefore fulfilled the inclusion.

  2. Article

    African Journals Online (AJOL)

    FDB

    Institutional repository (IR), therefore, is any digital repository that is set up to capture, manage, preserve and distribute the intellectual ... Nigerian Universities. Article https://dx.doi.org/10.4314/iijikm.v8i3.8. Information Impact: Journal of Information and. Knowledge Management. 2017, Vol. 8 (3) Pg 83 - 102. ISSN: 2141 ...

  3. Article

    African Journals Online (AJOL)

    Easy trade

    Keyword: academic library, ICT, learning, students, utilization, private university. Introduction. Information and communication technology (ICT) includes all internet-enabled infrastructures that are widely used .... utilization for achievement of goals because lack of ICT skills by users is part of the causes of negative attitude ...

  4. Article

    African Journals Online (AJOL)

    Nelson Edewor

    media enabled students to access local and web contents of information needs globally. The findings revealed that ... (2013) opined that web 2.0 technology and its associated social networks have brought tremendous effects to ..... :Facet publishing. Mcloughlin, Dawn and Benn, Jill (2014) Reference 2.0: evolution of virtual.

  5. Article

    African Journals Online (AJOL)

    Easy trade

    learning, video conferencing, etc (Otubelu, 2010). ICT is an essential ... as in work places will enhance social development. It is very important ... effective ICT use. This is indeed a pronounced problem in academic libraries, (Otubelu, 2010. Availability and Utilization of Information Communication Technology. Facilities in a ...

  6. Article

    African Journals Online (AJOL)

    Roland

    adopted a descriptive survey research design and used the stratified and simple random sampling techniques to ... advent of information technologies has led ... retrieve and evaluate information has. Information literacy skills as correlates of library user satisfaction among undergraduates in Nigeria. Information Impact:.

  7. Article

    African Journals Online (AJOL)

    user

    ICT deployments for a whole lot of its activities including that of libraries. Enormous. Influence of Users' ... in the educational administration, business education and higher education programs. Paraskeva, ... prior experience in the use of technology as an aid to teaching tended to use it in the classroom. Users‟ perceptions ...

  8. Article

    African Journals Online (AJOL)

    User

    library patrons on how to behave while in the library so as to minimize noise, and on how to use the library facilities so as to prolong the lifespan of ... and Sciences (TITS) and Panipat Institute of. Engineering and Technology (PIET) ..... own and know how to operate smartphones they find it easy and convenient to use the.

  9. Article

    African Journals Online (AJOL)

    Windows User

    intention for mobile learning on 3G mobile Internet technology in South-West part of. Nigeria. World Journal of Engineering and Pure and Applied Sciences, 1(2), 19-28. Relative Contributions of Individual, Institutional and System factors to Utilisation of Research4Life Databases in National Agricultural Research Institutes in ...

  10. Article

    African Journals Online (AJOL)

    USER

    The study investigated the need for professional assistance to users of information retrieval tools at the National Library of Nigeria, Enugu branch. A total of 38 (thirty-eight) users of the library were randomly selected and used for the study. It was found that most of the respondents. 18(47.3%) consulted the card catalogue ...

  11. Article

    African Journals Online (AJOL)

    wallow

    Scope of the study. This study covered universities in South-west, Nigeria and six cadres of the lecturers. (from professor to assistant lecturers) in the selected universities. Seven IP: copyrights, performers' right, trademarks, patents, geographic indications, industrial design and trade secrets were the main focus of the study.

  12. articles

    African Journals Online (AJOL)

    2011-09-03

    Sep 3, 2011 ... to assess perceived social support,20 as used by Simbayi et al.21 The items were selected to reflect perceived tangible and emotional support. The Cronbach α-reliability coefficient of this 3-item scale was 0.92 in this sample. Internalised AIDS stigma. We used the 6-item internalised AIDS-related stigma ...

  13. IIE Bulletin: selected articles from 1988 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  14. IIE Bulletin: selected articles from 1994 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  15. IIE Bulletin: selected articles from 1987 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  16. IIE Bulletin: selected articles from 1985 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  17. IIE Bulletin: selected articles from 1993 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  18. IIE Bulletin: selected articles from 1990 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  19. IIE Bulletin: selected articles from 1995 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  20. IIE Bulletin: selected articles from 1997 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  1. IIE Bulletin: selected articles from 1989 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  2. IIE Bulletin: selected articles from 1991 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  3. IIE Bulletin: selected articles from 1992 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  4. IIE Bulletin: selected articles from 1986 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  5. IIE Bulletin: selected articles from 1996 issues of ``boletin iie``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

  6. Special Issue: Selected Articles from the 1994 NORCHIP Seminar

    DEFF Research Database (Denmark)

    1996-01-01

    This Special Issue of Analog Integrated Circuits and Signal Processing presents extended versions of selected papers from the 12th NORCHIP Seminar which was held November 8-9, 1994, in Gothenburg, Sweden....

  7. Special Issue: Selected Articles from the 1996 NORCHIP Seminar

    DEFF Research Database (Denmark)

    1998-01-01

    This Special Issue of Analog Integrated Circuits and Signal Processing presents extended versions of selected papers from the 14th NORCHIP Conference which was held November 4-5, in Helsinki, Finland...

  8. Technology trends in selected areas

    International Nuclear Information System (INIS)

    Mason, R.

    1990-01-01

    Besides the issues of international consequences of science and technology developments (including information technology, biotechnology, materials technology, nuclear technology, space technology) the following topics were touched only briefly: energy and uses of nuclear power, environmental issues, and matters such as the comprehensive test-ban treaty and the way ahead -more perhaps a phased approach than a single step. The limited time available did not allow considering the role of the United Nations and any other institutional forms in these matters. There is conviction that there was enough historical evidence to suggest that there will be a need for a plurality of institutions, with different geographical, and maybe even political, imperatives. In summary, a conference such as this one at Sendai can offer the United Nations advice on the dynamics of change in sectors of science and technology, of the impact of such changes on matters related to international security - military, economic and the environment. There is belief in the maximum diffusion of science and technology with the minimum discrimination but at the same time dissemination consistent with international security. The value of co-operative efforts in research and development, in the removal of asymmetries in the international system. The removal of such asymmetries would constitute a significant step on the way ahead, to a more just and lasting equilibrium between States

  9. Special Article Personal Wearable Technologies in Education: Value or Villain?

    Science.gov (United States)

    Borthwick, Arlene C.; Anderson, Cindy L.; Finsness, Elizabeth S.; Foulger, Teresa S.

    2015-01-01

    Wearable personal learning technologies can gather data from the person wearing the device or from the surrounding environment and enable that data to be transferred to another device or shared via the cloud. Wearable technologies can serve as a valuable asset in the classroom enhancing differentiation of instruction and student engagement. They…

  10. Unveiling Environmental Sociology Approaches: a Review of Selected Articles

    Directory of Open Access Journals (Sweden)

    Fabio Bacchiegga

    2013-12-01

    Full Text Available The environmental issue has become the object of wide discussion in recent decades, delimiting and building a solid presence, especially in the academic field. This issue has emerged during the 1960s, within a very specific historical context – counterculture and criticisms of the current The environmental issue has become the object of wide discussion in recent decades, delimiting and building a solid presence, especially in the academic field. This issue has emerged during the 1960s, within a very specific historical context – counterculture and criticisms of the current predatory model of development. It has arrived in Brazil in the 1970s, assuming a singular face. Nowadays, it expresses the criticism of the end of the “Economic Miracle” and the environmental impacts resulting from this development option. Knowing the process of institutionalization is important to understand how Environmental Sociology leaves the status of subfield areas of Sociology, such as Rural Sociology, and achieves a specific field. In this paper, we present a discussion about the “making” of the Brazilian Environmental Sociology, arguing it as an established field of study and it needs to reflect about its theoretical construction. Therefore, we aim to analyze the articles on the theme “Environment and Society” published in major journals related to the Humanities area of Brazil, 1980 to 2007, from the method “Content Analysis”, and thus contribute to the understanding of Environmental Sociology process of (remaking as a specific area of sociological thought.

  11. The Role of Mobile Technology in Tourism: Patents, Articles, News, and Mobile Tour App Reviews

    Directory of Open Access Journals (Sweden)

    Dongwook Kim

    2017-11-01

    Full Text Available The purpose of this research is to identify the status and role of mobile technology in achieving sustainable and smart tourism, and to suggest future research and strategy directions for academia and managers in practice. This research utilized multiple sources, such as patents, academic articles, and news, and selected methodologies optimized for the purpose of each study. Study 1 used Netminer, a social network analysis program, to analyze the relationships between patent’s International Patent Classification (IPC codes. Study 2 used the T-LAB program for content analysis to analyze the texts of patents, journal articles, and news. Study 3 used the Leximancer program, which utilizes relative frequency to analyze mobile app consumer reviews. In study 1, we identified various forms of data related technologies and mobile technologies for smart city systems and maps. In study 2, we found the environment, sustainability, business, and market themes to be related to mobile technology. In study 3, we explored consumers’ attitudes and preferences for mobile travel app using their reviews. Advances in mobile technology are expected to create innovative experiences for consumers, foster a sustainable competitive advantage for tourism destinations and tourism-related suppliers, and create sustainable competencies for smart tourism.

  12. special article ethics and electronic health information technology

    African Journals Online (AJOL)

    David Ofori-Adjei

    Electronic Health Information Technology, (EHIT) has become an integral part of the national health care delivery system. Reliance on EHIT seems poised to grow in the years to come due to the myriad of advantages derived from the capture, storage, retrieval and analysis of large volumes of protected health data, and from ...

  13. Review Article: Current Knowledge on Microarray Technology - An ...

    African Journals Online (AJOL)

    The completion of whole genome sequencing projects has led to a rapid increase in the availability of genetic information. In the field of transcriptomics, the emergence of microarray-based technologies and the design of DNA biochips allow high-throughput studies of RNA expression in cell and tissue at a given moment.

  14. Special Article Ethics and Electronic Health Information Technology ...

    African Journals Online (AJOL)

    Objectives: The National Health Insurance Scheme (NHIS), and the National Identification Authority (NIA), pose ethical challenges to the physician-patient relationship due to interoperability. This paper explores (1) the national legislation on Electronic Health Information Technology (EHIT), (2) the ethics of information ...

  15. Fabrication of a First Article Lightweight Composite Technology Demonstrator - Exospine

    Science.gov (United States)

    2014-01-01

    Technology DC2500 (Gerber) (Tolland, CT) cutting table. AutoCAD * drawings were provided by Dr. John J. Tierney, scientist at UD-CCM. These... AutoCad is a registered trademark of Autodesk, Inc., San Rafael, CA. † Duratec is a registered

  16. Journal of Nanjing Institute of Technology (Selected Articles),

    Science.gov (United States)

    1982-12-09

    electrodes and used the sealing-in technique of first-order transition DWQ glass. Experimental research was carried out on a CuCI laser with a 1.2...Long Life Laser The sealed-off self-heated CuCI laser with repetitive pulses is a device which uses fast speed pulsed excitation with repetition

  17. Advances in copper laser technology: kinetic enhancement [review article

    Science.gov (United States)

    Withford, Michael J.; Brown, Daniel J. W.; Mildren, Richard P.; Carman, Robert J.; Marshall, Graham D.; Piper, James A.

    Since their invention in 1966 copper vapour lasers (CVLs) have developed into a mature technology with applications including high-speed imaging, micro-machining, non-linear frequency conversion to the ultraviolet, and pumping of solid-state laser materials. However, the performance characteristics of conventional CVLs are fundamentally limited by kinetic processes at play within the gain medium and hence, these devices largely failed to keep pace with advances in visible solid state lasers during the late 1980s and early 1990s. In 1996 a new subclass of CVL, termed a kinetically enhanced or KE-CVL, was developed that used a ternary gas mixture (HCl-H 2-Ne) to tailor the kinetic processes that limit laser performance. These devices offer dramatic improvements in power (both average and high beam quality) and repetition rate scalability. Indeed, 100 W of visible, high beam quality power is now readily available from relatively small copper laser systems. In this paper the underlying principles and performance characteristics of KE-CVLs will be reviewed.

  18. ELT Research in Turkey: A Content Analysis of Selected Features of Published Articles

    Science.gov (United States)

    Yagiz, Oktay; Aydin, Burcu; Akdemir, Ahmet Selçuk

    2016-01-01

    This study reviews a selected sample of 274 research articles on ELT, published between 2005 and 2015 in Turkish contexts. In the study, 15 journals in ULAKBIM database and articles from national and international journals accessed according to convenience sampling method were surveyed and relevant articles were obtained. A content analysis was…

  19. Technology meets research 60 years of CERN technology : selected highlights

    CERN Document Server

    Taylor, Thomas; Treille, Daniel; Wenninger, Horst

    2017-01-01

    "Big" science and advanced technology are known to cross-fertilize. This book emphasizes the interplay between particle physics and technology at CERN that has led to breakthroughs in both research and technology over the laboratory's first 60 years. The innovations, often the work of individuals or by small teams, are illustrated with highlights describing selected technologies from the domains of accelerators and detectors. The book also presents the framework and conditions prevailing at CERN that enabled spectacular advances in technology and contributed to propel the European organization into the league of leading research laboratories in the world. While the book is specifically aimed at providing information for the technically interested general public, more expert readers may also appreciate the broad variety of subjects presented. Ample references are given for those who wish to further explore a given topic.

  20. Selection of Technology in Global Manufacturing Industries

    DEFF Research Database (Denmark)

    Bruun, Peter

    1997-01-01

    Transferring a manufacturing system to another country has proven to be problematic for most multinational firms. Selection of the appropriate production process and technology is a critical decision as transplantation of an existing system from another country without adaptation usually does not...... choosing the key operational methods and human resource policies....

  1. A study on retrieval of article and making database in radio technology with personal computer

    International Nuclear Information System (INIS)

    Kim, Sung Hwan

    1997-01-01

    Although many useful articles appear in journals published in Korea, they are not always cited by researchers mainly due to absence of efficient searching system. The author made a program with 4 predefined filtering forms to detect published articles rapidly and accurately. The program was coded using database management system CA-Clipper VER 5.2. I used 486DX-II(8 Mbyte Ram, VGA, 560 Mbyte Hard Disk), desk-jet printer(HP-560k), and MS-DOS VER 5.0. I inputed twenty articles in the journal of Korean Society Radio technological Technology, And this program test for retrieve article and made database

  2. Selection of technologies for municipal wastewater treatment

    Directory of Open Access Journals (Sweden)

    Juan Pablo Rodríguez Miranda

    2015-11-01

    Full Text Available In water environmental planning in watersheds should contain aspects for the decontamination of receiving water body, therefore the selection of the treatment plants municipal wastewater in developing countries, you should consider aspects of the typical composition raw wastewater pollutant removal efficiency by technology, performance indicators for technology, environmental aspects of localization and spatial localization strategy. This methodology is built on the basis of technical, economic and environmental attributes, such as a tool for decision making future investments in treatment plants municipal wastewater with multidisciplinary elements.

  3. The selection criteria for Slovenian bibliography: with special emphasis on the articles

    Directory of Open Access Journals (Sweden)

    Marjeta Šušteričič

    2010-01-01

    Full Text Available Selection principles are an important stage in the creation of a national bibliography.The article outlines the selection of the national output to be included in Slovenian bibliography. It also presents theoretical basis for selection in general, with the emphasis on international guidelines and on the development of national principles and professional outlines. Statistical data and examples give more detailed analysis of selection criteria of articles regarding different types of serial publications. Results of the study show that selection criteria for Slovenian bibliography are to be constantly verified due to the dynamics of the national publishing industry. Nevertheless, the main features of selection criteria remain unchanged: lasting value of subject matter with the emphasis on scientific research and expert knowledge.

  4. Selecting appropriate technology for hydrogen production

    International Nuclear Information System (INIS)

    Tamhankar, S.S.

    2004-01-01

    'Full text:' Technologies for the production of synthesis gas (H2 + CO), a precursor to hydrogen, from a variety of fossil fuels are well known in industrial applications at relatively large scale. These include Steam Reforming (SR), Auto-Thermal Reforming (ATR) and Partial Oxidation (POX). A particular technology is selected based on the feed type and the desired products. Steam reforming is a mature technology, and is most prevalent for hydrogen production because of its high efficiency. However, at the smaller scale, the capital cost becomes a more significant factor, and a substantial reduction in this cost is necessary to meet the overall H2 gas cost targets, such as that stated by DOE ($1.50/kg). In developing small-scale H2 technologies, often, incremental improvements are incorporated. While useful, these are not adequate for the desired cost reduction. Also, for effective cost reduction, the whole system, including production, purification and associated equipment needs to be evaluated; cost reduction in just one of the units is not sufficient. This paper provides a critical assessment of the existing as well as novel technology options, specifically targeted at small scale H2 production. The technology options are evaluated to clearly point out which may or may not work and why. (author)

  5. New technology in personnel selection: How recruiter characteristics affect the adoption of new selection technology

    NARCIS (Netherlands)

    Oostrom, J.K.; Van der Linden, D.; Born, M.Ph.; Van der Molen, H.T.

    2013-01-01

    The aim of the present field study is to expand the understanding of how characteristics of recruiters relate to their adoption of new selection technology. In two studies, among 198 recruiters, we used the Technology Acceptance Model (TAM), together with two measures of personality (i.e., openness

  6. Article Article

    African Journals Online (AJOL)

    2010-08-09

    Aug 9, 2010 ... Article. Over the past two decades, all eight South African medical schools (see. Map (Fig. 1) and Table I) have undertaken renewal of their MB ChB educational ... and Training of Doctors in South Africa document, the five-star doctor ..... perceived lack of rewards for teaching and sense of the importance.

  7. Improving Classification of Protein Interaction Articles Using Context Similarity-Based Feature Selection

    Directory of Open Access Journals (Sweden)

    Yifei Chen

    2015-01-01

    Full Text Available Protein interaction article classification is a text classification task in the biological domain to determine which articles describe protein-protein interactions. Since the feature space in text classification is high-dimensional, feature selection is widely used for reducing the dimensionality of features to speed up computation without sacrificing classification performance. Many existing feature selection methods are based on the statistical measure of document frequency and term frequency. One potential drawback of these methods is that they treat features separately. Hence, first we design a similarity measure between the context information to take word cooccurrences and phrase chunks around the features into account. Then we introduce the similarity of context information to the importance measure of the features to substitute the document and term frequency. Hence we propose new context similarity-based feature selection methods. Their performance is evaluated on two protein interaction article collections and compared against the frequency-based methods. The experimental results reveal that the context similarity-based methods perform better in terms of the F1 measure and the dimension reduction rate. Benefiting from the context information surrounding the features, the proposed methods can select distinctive features effectively for protein interaction article classification.

  8. Improving Classification of Protein Interaction Articles Using Context Similarity-Based Feature Selection.

    Science.gov (United States)

    Chen, Yifei; Sun, Yuxing; Han, Bing-Qing

    2015-01-01

    Protein interaction article classification is a text classification task in the biological domain to determine which articles describe protein-protein interactions. Since the feature space in text classification is high-dimensional, feature selection is widely used for reducing the dimensionality of features to speed up computation without sacrificing classification performance. Many existing feature selection methods are based on the statistical measure of document frequency and term frequency. One potential drawback of these methods is that they treat features separately. Hence, first we design a similarity measure between the context information to take word cooccurrences and phrase chunks around the features into account. Then we introduce the similarity of context information to the importance measure of the features to substitute the document and term frequency. Hence we propose new context similarity-based feature selection methods. Their performance is evaluated on two protein interaction article collections and compared against the frequency-based methods. The experimental results reveal that the context similarity-based methods perform better in terms of the F1 measure and the dimension reduction rate. Benefiting from the context information surrounding the features, the proposed methods can select distinctive features effectively for protein interaction article classification.

  9. Solid state laser technology for inertial confinement fusion: A collection of articles from ''Energy and Technology Review''

    International Nuclear Information System (INIS)

    1988-06-01

    This paper contains reprinted articles that record several milestones in laser research at LLNL. ''Neodymium-Glass Laser Research and Development at LLNL'' recounts the history of the Laser Program and our work on neodymium-glass lasers. ''Nova Laser Technology'' describes the capabilities of the Nova laser and some of its uses. ''Building Nova: Industry Relations and Technology Transfer'' illustrates the Laboratory's commitment to work with US industry in technology development. ''Managing the Nova Laser Project'' details the organization and close monitoring of costs and schedules during the construction of the Nova laser facility. The article ''Optical Coatings by the Sol-Gel Process,'' describes our chemical process for making the damage-resistant, antireflective silica coatings used on the Nova laser glass. The technical challenges in designing and fabricating the KDP crystal arrays used to convert the light wave frequency of the Nova lasers are reported in ''Frequency Conversion of the Nova Laser.'' Two articles, ''Eliminating Platinum Inclusions in Laser Glass'' and ''Detecting Microscopic Inclusions in Optical Glass,'' describe how we dealt with the problem of damaging metal inclusions in the Nova laser glass. The last article reprinted here, ''Auxilliary Target Chamber for Nova,'' discusses the diversion of two of Nova's ten beamlines into a secondary chamber for the purpose of increasing our capacity for experimentation

  10. Partner Selection in Technological Licensing Agreements

    DEFF Research Database (Denmark)

    Laursen, Keld; Trombini, Giulia

    This paper investigates the matching of seller and buyer firms in the market for technology licensing. By combining organizational learning theory with the industrial organization approach, we propose a matching model in which technological similarities in terms of relatedness and familiarity wor...... with partners’ technological relatedness. We use data on the formation of license partnerships in the global biopharmaceutical industry over the period 1994-2004 and find that, on the whole, there is empirical support for our theoretical predictions....... that is technologically unrelated, ex ante familiarity with the licensors’ technology is required. We contend also that there is interdependence between technological learning and market competition: if partners are in the same product markets, the likelihood of technology license contractual partnerships decreases...

  11. Partner Selection in Technological Licensing Agreements

    DEFF Research Database (Denmark)

    Laursen, Keld; Trombini, Giulia

    This paper investigates the matching of seller and buyer firms in the market for technology licensing. By combining organizational learning theory with the industrial organization approach, we propose a matching model in which technological similarities in terms of relatedness and familiarity work...... as attractors, and market competition and potential involuntary spillovers act as repellants. Firms seek potential licensing partners by trying to maximize technological synergies while attempting to minimize the competitive downsides. We hypothesize that when licensees engage in matches involving a partner...... that is technologically unrelated, ex ante familiarity with the licensors’ technology is required. We contend also that there is interdependence between technological learning and market competition: if partners are in the same product markets, the likelihood of technology license contractual partnerships decreases...

  12. Writing for Publication: An Analysis of 591 Articles in Five Journals Dealing with Information Technology in Education

    Science.gov (United States)

    Axtell, Kulwadee; Chaffin, Amy J.; Aberasturi, Suzanne; Paone, Tina; Maddux, Cleborne

    2007-01-01

    This article presents information about all articles published over three years in five different journals dealing with information technology in education. The researchers collected all 591 articles from these well-known journals. All articles were analyzed using a researcher-made matrix. Information gathered included descriptive information…

  13. Risk calculations in the manufacturing technology selection process

    DEFF Research Database (Denmark)

    Farooq, S.; O'Brien, C.

    2010-01-01

    and supports an industrial manager in achieving objective and comprehensive decisions regarding selection of a manufacturing technology. Originality/value - The paper explains the process of risk calculation in manufacturing technology selection by dividing the decision-making environment into manufacturing...... in the shape of opportunities and threats in different decision-making environments. Practical implications - The research quantifies the risk associated with different available manufacturing technology alternatives. This quantification of risk crystallises the process of technology selection decision making......Purpose - The purpose of this paper is to present result obtained from a developed technology selection framework and provide a detailed insight into the risk calculations and their implications in manufacturing technology selection process. Design/methodology/approach - The results illustrated...

  14. Selected technology for the gas industry

    Science.gov (United States)

    1975-01-01

    A number of papers were presented at a conference concerned with the application of technical topics from aerospace activities for the gas industry. The following subjects were covered: general future of fossil fuels in America, exploration for fossil and nuclear fuels from orbital altitudes, technology for liquefied gas, safety considerations relative to fires, explosions, and detonations, gas turbomachinery technology, fluid properties, fluid flow, and heat transfer, NASA information and documentation systems, instrumentation and measurement, materials and life prediction, reliability and quality assurance, and advanced energy systems (including synthetic fuels, energy storage, solar energy, and wind energy).

  15. Selection of the surface water treatment technology - a full-scale technological investigation.

    Science.gov (United States)

    Pruss, Alina

    2015-01-01

    A technological investigation was carried out over a period of 2 years to evaluate surface water treatment technology. The study was performed in Poland, in three stages. From November 2011 to July 2012, for the first stage, flow tests with a capacity of 0.1-1.5 m³/h were performed simultaneously in three types of technical installations differing by coagulation modules. The outcome of the first stage was the choice of the technology for further investigation. The second stage was performed between September 2012 and March 2013 on a full-scale water treatment plant. Three large technical installations, operated in parallel, were analysed: coagulation with sludge flotation, micro-sand ballasted coagulation with sedimentation, coagulation with sedimentation and sludge recirculation. The capacity of the installations ranged from 10 to 40 m³/h. The third stage was also performed in a full-scale water treatment plant and was aimed at optimising the selected technology. This article presents the results of the second stage of the full-scale investigation. The critical treatment process, for the analysed water, was the coagulation in an acidic environment (6.5 < pH < 7.0) carried out in a system with rapid mixing, a flocculation chamber, preliminary separation of coagulation products, and removal of residual suspended solids through filtration.

  16. Selection and evaluation of technologies for oil rim preparation of Zapolyarnoye oilfield

    Science.gov (United States)

    Vazhenina, L. V.

    2017-10-01

    The article deals with various technologies for the oil rims preparation of Zapolyarnoye oil and gas condensate field. The following circuits were considered for the selection of the technology of preparation of extracted fluid: low-temperature separation (STC); low-temperature condensation (LTC); a low-temperature rectification (NTR); low-temperature absorption (LTA); membrane technology (Mt). Diagrams of these processes were collected and tested in the system HYSYS process simulation. Efficiency analysis of hydrocarbon raw materials preparation on the basis of functions, selection of components and narrow fractions.

  17. [Evaluation and selection of VOCs treatment technologies in packaging and printing industry].

    Science.gov (United States)

    Wang, Hai-Lin; Wang, Jun-Hui; Zhu, Chun-Lei; Nie, Lei; Hao, Zheng-Ping

    2014-07-01

    Volatile organic compounds (VOCs) play an important role in urban air pollution. Activities of industries including the packaging and printing industries are regarded as the major sources. How to select the suitable treating techniques is the major problem for emission control. In this article, based on the VOCs emission characteristics of the packaging and printing industry and the existing treatment technologies, using the analytic hierarchy process (AHP) model, an evaluation system for VOCs selection was established and all the technologies used for treatment were assessed. It showed that the priority selection was in the following order: Carbon Fiber Adsorption-Desorption > Granular Carbon Adsorption-Desorption > Thermal Combustion > Regenerative Combustion > Catalytic combustion > Rotary adsorption-concentration and combustion > Granular Carbon adsorption-concentration and combustion. Carbon Fiber Adsorption-Desorption was selected as the best available technology due to its highest weight among those technologies.

  18. Performance-Based Technology Selection Filter description report

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL)

  19. Performance-Based Technology Selection Filter description report

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

  20. Acceptance of Health Information Technologies, Acceptance of Mobile Health: A Review Article

    Directory of Open Access Journals (Sweden)

    Garavand A.

    2017-12-01

    Full Text Available Background: Mobile health is one of the new technologies for the utilization of health information. For its successful implementation as well as any other system, we must primarily measure the adoption and use of its factors. The purpose of this study was to systematically investigate published articles about the factors affecting the adoption of mobile health and categorizing the factors affecting the adoption of this system. Methods: This study is a comprehensive review done by searching major databases such as Google Scholar, Emerald, Science Direct, Iran Medex, SID, Magiran, Pub med, etc. In addition, we use Mobile, mobile Health + adoption, mobile Health + TAM, Health + TAM keywords in the range of 2004 to 2015. Results: Among the studies that use information technology theories to survey the factors affecting the adoption of mobile health, TAM model was used more than other models. Factors such as perceived ease of use, perceived usefulness and facilitating condition form TUATU are the most effective in the adoption of mobile health. Conclusion: Results showed that by considering factors such as perceived ease of use, perceived usefulness and facilitating condition can increase the adoption of mobile health system. Consequently, these factors are recommended to be considered in planning to run systems.

  1. Acceptance of Health Information Technologies, Acceptance of Mobile Health: A Review Article.

    Science.gov (United States)

    Garavand, A; Samadbeik, M; Kafashi, M; Abhari, Sh

    2017-12-01

    Mobile health is one of the new technologies for the utilization of health information. For its successful implementation as well as any other system, we must primarily measure the adoption and use of its factors. The purpose of this study was to systematically investigate published articles about the factors affecting the adoption of mobile health and categorizing the factors affecting the adoption of this system. This study is a comprehensive review done by searching major databases such as Google Scholar, Emerald, Science Direct, Iran Medex, SID, Magiran, Pub med, etc. In addition, we use Mobile, mobile Health + adoption, mobile Health + TAM, Health + TAM keywords in the range of 2004 to 2015. Among the studies that use information technology theories to survey the factors affecting the adoption of mobile health, TAM model was used more than other models. Factors such as perceived ease of use, perceived usefulness and facilitating condition form TUATU are the most effective in the adoption of mobile health. Results showed that by considering factors such as perceived ease of use, perceived usefulness and facilitating condition can increase the adoption of mobile health system. Consequently, these factors are recommended to be considered in planning to run systems.

  2. Technology Selections for Cylindrical Compact Fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey A. Phillips

    2010-10-01

    A variety of process approaches are available and have been used historically for manufacture of cylindrical fuel compacts. The jet milling, fluid bed overcoating, and hot press compacting approach being adopted in the U.S. AGR Fuel Development Program for scale-up of the compacting process involves significant paradigm shifts from historical approaches. New methods are being pursued because of distinct advantages in simplicity, yield, and elimination of process mixed waste. Recent advances in jet milling technology allow simplified dry matrix powder preparation. The matrix preparation method is well matched with patented fluid bed powder overcoating technology recently developed for the pharmaceutical industry and directly usable for high density fuel particle matrix overcoating. High density overcoating places fuel particles as close as possible to their final position in the compact and is matched with hot press compacting which fully fluidizes matrix resin to achieve die fill at low compacting pressures and without matrix end caps. Overall the revised methodology provides a simpler process that should provide very high yields, improve homogeneity, further reduce defect fractions, eliminate intermediate grading and QC steps, and allow further increases in fuel packing fractions.

  3. Selection of a Brine Processor Technology for NASA Manned Missions

    Science.gov (United States)

    Carter, Donald L.; Gleich, Andrew F.

    2016-01-01

    The current ISS Water Recovery System (WRS) reclaims water from crew urine, humidity condensate, and Sabatier product water. Urine is initially processed by the Urine Processor Assembly (UPA) which recovers 75% of the urine as distillate. The remainder of the water is present in the waste brine which is currently disposed of as trash on ISS. For future missions this additional water must be reclaimed due to the significant resupply penalty for missions beyond Low Earth Orbit (LEO). NASA has pursued various technology development programs for a brine processor in the past several years. This effort has culminated in a technology down-select to identify the optimum technology for future manned missions. The technology selection is based on various criteria, including mass, power, reliability, maintainability, and safety. Beginning in 2016 the selected technology will be transitioned to a flight hardware program for demonstration on ISS. This paper summarizes the technology selection process, the competing technologies, and the rationale for the technology selected for future manned missions.

  4. A System for Understanding and Selecting English-Language Articles for Advanced ESL Writers

    Science.gov (United States)

    Robinson, Heather M.

    2010-01-01

    The use of definite and indefinite articles in English is well known to be a major point of difficulty for many nonnative English speakers. These difficulties prevail even when the speakers are fluent in most other aspects of English grammar and style. This article investigates the pedagogical and linguistic reasons why article use is such a…

  5. Decision support for selecting SLM technologies with stakeholders

    NARCIS (Netherlands)

    Schwilch, G.; Bachmann, F.; Graaff, de J.

    2012-01-01

    Sustainable Land Management (SLM) is a classic multi-stakeholder issue, concerning individual and community land users, agricultural advisors, natural resource managers, government authorities, civil society, and researchers alike. Selecting appropriate SLM technologies for implementation requires

  6. Selection of Server-Side Technologies for an E-Business Curriculum

    Science.gov (United States)

    Sandvig, J. Christopher

    2007-01-01

    The rapid growth of e-business and e-commerce has made server-side programming an increasingly important topic in information systems (IS) and computer science (CS) curricula. This article presents an overview of the major features of several popular server-side programming technologies and discusses the factors that influence the selection of…

  7. Enzyme technology: Key to selective biorefining

    DEFF Research Database (Denmark)

    Meyer, Anne S.

    2014-01-01

    to the reaction is a unique trait of enzyme catalysis. Since enzyme selectivity means that a specific reaction is catalysed between particular species to produce definite products, enzymes are particularly fit for converting specific compounds in mixed biomass streams. Since enzymes are protein molecules...... their rational use in biorefinery processes requires an understanding of the basic features of enzymes and reaction traits with respect to specificity, kinetics, reaction optima, stability and structure-function relations – we are now at a stage where it is possible to use nature’s enzyme structures as starting...... point and then improve the functional traits by targeted mutation of the protein. The talk will display some of our recent hypotheses related to enzyme action, recently obtained results within knowledge-based enzyme improvements as well as cast light on research methods used in optimizing enzyme...

  8. Institutional Distance and Partner Selection in International Technological Alliances

    NARCIS (Netherlands)

    Krammer, Marius

    2013-01-01

    This study posits that institutional distance has a negative influence on partner selection in international technological alliances. Empirical results based on a dataset of firms in the global tire industry confirm that firms prefer technological partners from closer cognitive, normative and

  9. Evaluation of selected sewage sludge gasification technological parameters

    Science.gov (United States)

    Gałko, Grzegorz; Król, Danuta

    2018-02-01

    Evaluation of selected sewage sludge gasification technological parameters was shown in this paper. Degree of carbon conducted in combustible substance and syngas efficiency (technological readiness coefficient) in accordance with equations were calculated. Enthalpy of individual compounds formation and energy balance were calculated in accordance with rule of Hess.

  10. A Network Analysis Model for Selecting Sustainable Technology

    Directory of Open Access Journals (Sweden)

    Sangsung Park

    2015-09-01

    Full Text Available Most companies develop technologies to improve their competitiveness in the marketplace. Typically, they then patent these technologies around the world in order to protect their intellectual property. Other companies may use patented technologies to develop new products, but must pay royalties to the patent holders or owners. Should they fail to do so, this can result in legal disputes in the form of patent infringement actions between companies. To avoid such situations, companies attempt to research and develop necessary technologies before their competitors do so. An important part of this process is analyzing existing patent documents in order to identify emerging technologies. In such analyses, extracting sustainable technology from patent data is important, because sustainable technology drives technological competition among companies and, thus, the development of new technologies. In addition, selecting sustainable technologies makes it possible to plan their R&D (research and development efficiently. In this study, we propose a network model that can be used to select the sustainable technology from patent documents, based on the centrality and degree of a social network analysis. To verify the performance of the proposed model, we carry out a case study using actual patent data from patent databases.

  11. Selected articles translated from Jadernye Konstanty (Nuclear Constants) volumes 3-4, 1994

    International Nuclear Information System (INIS)

    1997-06-01

    This report contains translated articles on cross sections of (n,2n) and (p,n) reactions. An article on Testing of Neutron Cross-Section Files from the BROND-2 and ENDF/B-6 Libraries in Benchmark Experiments is also included. The last one deals with fission Cross-Sections at Incident Proton Energies above 70 Mev. cf. Refs, figs, tabs

  12. Son preference, sex selection, and the "new" new reproductive technologies.

    Science.gov (United States)

    van Balen, Frank; Inhorn, Marcia C

    2003-01-01

    Throughout recorded history, humans have tried to influence the sex of their offspring, through pregnancy injunctions, infanticide, and infant/child neglect. Reproductive technologies developed in the late 20th century allow determination of the sex of the offspring during pregnancy, making "sex selection" through abortion possible. Especially in parts of East and South Asia, sex selection against female fetuses has had dramatic consequences for male/female sex ratios. However, "newer" new reproductive technologies, such as prenatal genetic diagnosis and DNA-weighted semen selection, can now be applied for sex selection; eventually, the latter technology may become easily accessible as a noninvasive method. The prospects of these new technologies for sex selection must be considered in the light of cultural values surrounding son preference / daughter discrimination in many parts of the world, most notably Asia, as well as preferences for a "gender-balanced" family in much of the West. The ethical issues surrounding these technologies, such as the right to life and the equal treatment of female children, are potentially profound, but legislating the appropriate use of these "newest" new reproductive technologies will be difficult.

  13. A Study on Radio Access Technology Selection Algorithms

    CERN Document Server

    Wu, Leijia

    2012-01-01

    This book discusses the basic idea of Common Radio Resource Management (CRRM), especially on the Radio Access Technologies selection part of CRRM. It introduces two interaction functions (information reporting function and RRM decision support function) and four interaction degrees (from low to very high) of CRRM. Four possible CRRM topologies (CRRM server, integrated CRRM, Hierarchical CRRM, and CRRM in user terminals) are described. The book presents different Radio Access Technologies selection algorithms, including single criterion and multiple criteria based algorithms are presented and compares them. Finally, the book analyses the advantages and disadvantages of the different selection algorithms.

  14. Decision Analysis System for Selection of Appropriate Decontamination Technologies

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Boudreaux, J.F.; Chinta, S.; Zanakis, S.H.

    1998-01-01

    The principal objective for designing Decision Analysis System for Decontamination (DASD) is to support DOE-EM's endeavor to employ the most efficient and effective technologies for treating radiologically contaminated surfaces while minimizing personnel and environmental risks. DASD will provide a tool for environmental decision makers to improve the quality, consistency, and efficacy of their technology selection decisions. The system will facilitate methodical comparisons between innovative and baseline decontamination technologies and aid in identifying the most suitable technologies for performing surface decontamination at DOE environmental restoration sites

  15. Decision Analysis System for Selection of Appropriate Decontamination Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Ebadian, M.A.; Boudreaux, J.F.; Chinta, S.; Zanakis, S.H.

    1998-01-01

    The principal objective for designing Decision Analysis System for Decontamination (DASD) is to support DOE-EM's endeavor to employ the most efficient and effective technologies for treating radiologically contaminated surfaces while minimizing personnel and environmental risks. DASD will provide a tool for environmental decision makers to improve the quality, consistency, and efficacy of their technology selection decisions. The system will facilitate methodical comparisons between innovative and baseline decontamination technologies and aid in identifying the most suitable technologies for performing surface decontamination at DOE environmental restoration sites.

  16. ORIGINAL ARTICLE ORI ORI Is selection for a registrar post in ...

    African Journals Online (AJOL)

    registrars in Radiology to determine whether selection for a registrar post in South Africa is defined by a ... experience are key criteria for the selection of registrars in South Africa. Gender equality is achieved in ... approximately 5 available positions (comparable to the trend in South. Africa). However, the South African ...

  17. PERSPECTIVE TECHNOLOGIES OF THERMAL HARDENING OF LARGE-SIZE ARTICLES OF TWO-PHASE TITANIUM ALLOYS

    Directory of Open Access Journals (Sweden)

    V. N. Fedulov

    2005-01-01

    Full Text Available The article is dedicated to the development and industrial assimilation of the fundamentally new methods of thermal strengthening of large articles out of hardenable titanic alloys.

  18. The Impact of Density: The Importance of Nonlinearlity and Selection on Flight and Fight Responses: A Review Article

    Directory of Open Access Journals (Sweden)

    George H. Conklin

    2004-10-01

    Full Text Available The article "The Impact of Density" by Wendy C. Regoeczi is reviewed as part of Sociation Today's effort to place focus on important articles relating to core social science concepts. The effects of density on human behavior may have been underreported in the past due to the non-linear relationship between density and crowding and the fact that people self select out of dense situations.

  19. Developing a framework for energy technology portfolio selection

    Science.gov (United States)

    Davoudpour, Hamid; Ashrafi, Maryam

    2012-11-01

    Today, the increased consumption of energy in world, in addition to the risk of quick exhaustion of fossil resources, has forced industrial firms and organizations to utilize energy technology portfolio management tools viewed both as a process of diversification of energy sources and optimal use of available energy sources. Furthermore, the rapid development of technologies, their increasing complexity and variety, and market dynamics have made the task of technology portfolio selection difficult. Considering high level of competitiveness, organizations need to strategically allocate their limited resources to the best subset of possible candidates. This paper presents the results of developing a mathematical model for energy technology portfolio selection at a R&D center maximizing support of the organization's strategy and values. The model balances the cost and benefit of the entire portfolio.

  20. Technology Selection for Offshore Underwater Small Modular Reactors

    OpenAIRE

    Shirvan, Koroush; Ballinger, Ronald; Buongiorno, Jacopo; Forsberg, Charles; Kazimi, Mujid; Todreas, Neil

    2016-01-01

    This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030–2040 timeframe. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR) designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the ...

  1. Student Reviews of Selected Current Articles in Adolescent Psychology: Academics, Developmental Issues, Psychopathology, Sexual Behavior, Substance Abuse, and Suicide.

    Science.gov (United States)

    Gillis, H. Lee, Ed.; Sirmans, Amanda, Ed.

    Critical annotations of articles written in 1988 or 1989 and selected from "PSYCHSCAN: Clinical Psychology" are presented in this document. The annotations were written by college students in an undergraduate adolescent psychology class. The annotations are clustered under the following topics: (1) academics, including learning disabilities, sleep…

  2. IIE Bulletin: selected articles from 1998 issues of `Boletin iie`; Articulos selecccionados del Boletin iie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    Boletin IIE, produced by the Instituto de Investigaciones Electricas in Mexico, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the ETDE Energy database. [Espanol] El Boletin IIE es producido en Mexico por el Instituto de Investigaciones Electricas. Este se publica 6 veces al ano. Se han preparado citas y resumenes para articulos individuales dentro del alcance de la base de datos Energy del ETDE.

  3. Feature article. Current state and problems of modeling and simulation technologies in the area of light water reactor

    International Nuclear Information System (INIS)

    Koshizuka, Seiichi; Okamoto, Koji; Tanaka, Shunichi; Morii, Tadashi; Nakamura, Takashi; Yamamoto, Akio; Okajima, Narimitsu

    2011-01-01

    This special feature article consisted of seven reports summarizing discussions at the workshop on 'modeling and simulation technologies' held in early March 2011. These technologies were one of the most important strategic technologies among nuclear basic researches. Simulation technologies and Verification and Validation (V and V), problems of US software used in Japan and light water reactor simulation technology in regulating agency were overviewed. Experts in the area of thermo hydraulics and safety analysis, particle transport analysis and reactor physics and core analysis detailed current state and problems of simulation technologies. Standardization of V and V, development of original computer code and establishment of experimental database with assured accuracy for V and V should be conducted in Japan. (T. Tanaka)

  4. Comparison of statistical methods, type of articles and study design used in selected Pakistani medical journals in 1998 and 2007.

    Science.gov (United States)

    Rao, Masood Hussain; Khan, Nazeer

    2010-09-01

    To compare the statistical methods, types of article and design of studies used in 1998 and 2007 articles of leading indexed and non-indexed medical journals of Pakistan. Six leading medical journals of Pakistan: (1) JCPSP, (2) JPMA, (3) JAMC, (4) PJMS, (5) PJMR and (6) PAFMJ, were selected for this study. Articles reviewed were 1057 to achieve the above mentioned objective. The articles reviewed for 1998 and 2007 were 366 and 691, respectively. Original articles contributed the maximum percentage of 65.6%, followed by case reports with 24.8%. The contribution of case reports in 1998 was 20.5% which increased to 27.1% in 2007. There was no statistically significant difference between 'indexed' and 'non-indexed' journals for different type of statistical methods in 1998 or 2007. In total, 749 articles were categorized as 'original articles' or 'short communication'. Among them, 51% articles mentioned study design and 67.3% of them were correct for the respective methodology. In 1998, 202 (74%) articles did not use any statistics or indicated only descriptive statistics, while in 2007, 239 (50.2%) articles did the same. The reader who was familiar with t-test and contingency tables in 1998 could have understood 97.4% of the scientific articles. However, this percentage dropped to 83.0% in 2007. Quality of elaborating methods and usage of biostatistics in 6 leading Pakistani medical journals improved from 1998 to 2007, but has still to come up as compared to other western medical journals.

  5. Biogas technology research in selected sub-Saharan African countries

    African Journals Online (AJOL)

    This reviews aims to provide an insight and update of the state of biogas technology research in some selected sub-Saharan African countries in peer reviewed literature. This paper also aims to highlight the sub-Saharan countries' strengths and weaknesses in biogas research and development capacity. An attempt is ...

  6. Economics of selected water control technologies and their ...

    African Journals Online (AJOL)

    Using a production function, marginal productivity of farm inputs and benefit-cost analysis, we explore the economics of selected water control technologies. From the production function, all farm inputs, including irrigation water is found to have a significant and positive effect on yield. Marginal value products of farm inputs ...

  7. Sustainable school infrastructure through effective innovative building technology selection

    CSIR Research Space (South Africa)

    Mphahlele, C

    2014-10-01

    Full Text Available The aim of the paper is to provide an overview of a model proposed for the selection Innovative Building Technologies (IBTs) and procurement of services supporting the erection of the IBTs that will ensure the construction of a sustainable school...

  8. A software tool for soil clean-up technology selection

    International Nuclear Information System (INIS)

    Vranes, S.; Gonzalez-Valencia, E.; Lodolo, A.; Miertus, S.

    2002-01-01

    Soil remediation is a difficult, time-consuming and expensive operation. A variety of mature and emerging soil remediation technologies is available and future trends in remediation will include continued competition among environmental service companies and technology developers, which will definitely result in further increase in the clean-up options. Consequently, the demand has enhanced developing decision support tools that could help the decision makers to select the most appropriate technology for the specific contaminated site, before the costly remedial actions are taken. Therefore, a software tool for soil clean-up technology selection is currently being developed with the aim of closely working with human decision makers (site owners, local community representatives, environmentalists, regulators, etc.) to assess the available technologies and preliminarily select the preferred remedial options. The analysis for the identification of the best remedial options is based on technical, financial, environmental, and social criteria. These criteria are ranked by all involved parties to determine their relative importance for a particular project. (author)

  9. Author-based journal selection system that helps authors save time in article submission.

    Science.gov (United States)

    Ozturk, Onur; Ileri, Fatih

    2018-01-01

    Submission to journals takes a lot of time and format related submission requirements vary greatly from one journal to another. Lack of time and motivation in academia reduces scientific outputs and demotivates researchers. Author-based journal selection system (ABJSS) is a platform for pooling manuscripts conceived to minimize the time spent for manuscript submission and to increase scientific output. The system will provide two types of account: "Author" and "Journal Administrator". Each account type will have its own abilities and permissions. The ABJJS system is an ongoing project that will be designed in cooperation with IT experts and academicians and it will be presented to the scientific world as soon as it secures sufficient support.

  10. Selective Exposure to Health Information: The Role of Headline Features in the Choice of Health Newsletter Articles.

    Science.gov (United States)

    Kim, Hyun Suk; Forquer, Heather; Rusko, Joseph; Hornik, Robert C; Cappella, Joseph N

    2016-01-01

    This study investigated how content and context features of headlines drive selective exposure when choosing between headlines of a monthly e-mail health newsletter in a naturalistic setting over a period of nine months. Study participants received a monthly e-mail newsletter and could freely open it and click any headline to read the accompanying article. In each e-mail newsletter, nine headlines competed with each other for selection. Textual and visual information of the headlines was content-analyzed, and clickstream data on the headlines were collected automatically. The results showed that headlines invited more frequent audience selections when they provided efficacy-signaling information in an imperative voice, when they used a moderate number of negative emotion words, when they presented negative thumbnail images while mentioning cancer or other diseases, and when they were placed higher in position.

  11. Health information technology vendor selection strategies and total factor productivity.

    Science.gov (United States)

    Ford, Eric W; Huerta, Timothy R; Menachemi, Nir; Thompson, Mark A; Yu, Feliciano

    2013-01-01

    The aim of this study was to compare health information technology (HIT) adoption strategies' relative performance on hospital-level productivity measures. The American Hospital Association's Annual Survey and Healthcare Information and Management Systems Society Analytics for fiscal years 2002 through 2007 were used for this study. A two-stage approach is employed. First, a Malmquist model is specified to calculate hospital-level productivity measures. A logistic regression model is then estimated to compare the three HIT adoption strategies' relative performance on the newly constructed productivity measures. The HIT vendor selection strategy impacts the amount of technological change required of an organization but does not appear to have either a positive or adverse impact on technical efficiency or total factor productivity. The higher levels in technological change experienced by hospitals using the best of breed and best of suite HIT vendor selection strategies may have a more direct impact on the organization early on in the process. However, these gains did not appear to translate into either increased technical efficiency or total factor productivity during the period studied. Over a longer period, one HIT vendor selection strategy may yet prove to be more effective at improving efficiency and productivity.

  12. Building social capital among rural, older Australians through information and communication technologies: a review article.

    Science.gov (United States)

    Warburton, Jeni; Cowan, Sue; Bathgate, Tenzin

    2013-03-01

    This paper undertakes a comprehensive review of the growing international literature on the adoption and use of information and communication technologies (ICTs) among older people. Issues associated with access and adoption of ICTs among older people living in rural communities will be explored, drawing on social capital as a theoretical lens through which to identify how these new technologies can build healthy ageing. ICTs as bridging social capital can address some of the challenges of service provision in rural Australia and provide access to more extensive information and resources. ICTs can also contribute to bonding social capital through access to other forms of communication to build on local connectedness. However, rural, older people face particular challenges of access, which may exacerbate the cycle of rural social exclusion. In the context of the Australian National Broadband rollout, it is timely to consider how some of these disparities can be addressed. © 2012 The Authors. Australasian Journal on Ageing © 2012 ACOTA.

  13. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-08-08

    Aug 8, 2017 ... to select the analogues of materials for the manufacture of products with special properties. The technical ... The aim of this article is to investigate the technological and mechanical properties of GH304. T14992-1994 (the ... The tests were carried out with the automated compilation of protocols. The test ...

  14. Selection of Nuclear Desalination Technology in East Kalimantan Province

    International Nuclear Information System (INIS)

    Siti Alimah; Sudi Ariyanto; Erlan Dewita; Budiarto; Geni R Sunaryo

    2009-01-01

    Nowadays, electricity demand in East Kalimantan increases with a rate of 12% per annum. Since the electricity supply produced by PT PLN increases 8,5% per annum, then it can consequently an occurrence of electricity shortage in the region. NPP may be regarded as one viable option to overcome the problem. In case of fresh water availability, the supply is also less than the demand. Therefore, a serious effort is necessary. Nuclear desalination, which is a process of separating dissolved salts of seawater or brackish water, can be coupled to the NPP to produce fresh water. There are some desalination technology commonly used in the world i.e. MSF (Multi-Stage Flash Distillation), MED (Multi-Effect Distillation) and RO (Reverse Osmosis). This paper shows the study result of selection for desalination technology to obtain the optimum solution. The selection is done based on the thirteen important parameters, which are estimated to affect on determine technology option on the nuclear desalination with a weighing factor with ranges from 1 to 4. The most favourable technology is that with the highest point. The result show that MED has highest weighing factor that is 39, followed 36 for RO and 33 for MSF. Since the water quality requirement to supply NPP is about 1 ppm and to supply public demand is below 1000 ppm, so a hybrid system of MED-RO is optimum option to produce fresh water. (author)

  15. How to Select Publisher for Open Access Book and Article ? Problem of Choice or What Author Must Know

    Directory of Open Access Journals (Sweden)

    Dr. Sergey Y. YURISH

    2016-06-01

    Full Text Available Open access (OA is entering steady into engineering sciences, and is now considered as an alternative to the traditional way of publishing monographs, proceedings, handbooks, textbooks, theses and articles. With the ever increasing number of open access publishers it is important to choose the right one. From one hand, a technical simplicity of creating books in pdf format and wide availability of Internet technologies caused many small, so-called “garage-based” publishers. From other hand, almost all established, well known traditional publishers report that it is increasingly difficult to find academic experts willing to review manuscripts, with informal methods such as web searches having to be used to find those to approach. This article is focused on the main requirements, such as quality, connection with learned, professional societies and subject associations, dissemination, print copies, etc. A check list for publisher estimation and example are given. This article will be useful for prospective authors as well as established citation indexes, lists, databases, catalogs, collectors and policemakers to help them to determinea reputated publishers for OA books and articles.

  16. A proposal for a process of selection, bibliometrics and sistemic review of articles on the supply chain performance evaluation

    Directory of Open Access Journals (Sweden)

    Emílio Della Bruna Junior

    2012-11-01

    Full Text Available Supply Chain Management has been widely studied through scientific researches and publications, presenting well grounded concepts in both academic and business areas. Meanwhile, the topic of Performance Evaluation is newer and its concepts are still under consolidation. In this context, the paper aims to propose a process for selection and analysis of a portfolio of scientific articles on Supply Chain Performance Evaluation. To do this, it illustrates a process for searching and selecting articles from scientific databases and analyzes them through Bibliometrics and Systemic Review. As a result, a portfolio of 18 papers aligned to the research subject was obtained and the journals, authors and articles with higher academic relevance were identified. The Systemic Review, in turn, has highlighted the knowledge gaps of the evaluated papers and, from these, developed a research question and objective aiming to answer them. These latter will guide the continuity of this research. Finally, it is expected that the proposed process can be useful for researchers wishing to apply it to their research topics.

  17. Volvo and Infiniti drivers' experiences with select crash avoidance technologies.

    Science.gov (United States)

    Braitman, Keli A; McCartt, Anne T; Zuby, David S; Singer, Jeremiah

    2010-06-01

    Vehicle-based crash avoidance systems can potentially reduce crashes, but success depends on driver acceptance and understanding. This study gauged driver use, experience, and acceptance among early adopters of select technologies. Telephone interviews were conducted in early 2009 with 380 owners of Volvo vehicles equipped with forward collision warning with autobrake, lane departure warning, side-view assist, and/or active bi-xenon headlights and 485 owners of Infiniti vehicles with lane departure warning/prevention. Most owners kept systems turned on most of the time, especially forward collision warning with autobrake and side-view assist. The exception was lane departure prevention; many owners were unaware they had it, and the system must be activated each time the vehicle is started. Most owners reported being safer with the technologies and would want them again on their next vehicles. Perceived false or unnecessary warnings were fairly common, particularly with side-view assist. Some systems were annoying, especially lane departure warning. Many owners reported safer driving behaviors such as greater use of turn signals (lane departure warning), increased following distance (forward collision warning), and checking side mirrors more frequently (side-view assist), but some reported driving faster at night (active headlights). Despite some unnecessary or annoying warnings, most Volvo and Infiniti owners use crash avoidance systems most of the time. Among early adopters, the first requirement of effective warning systems (that owners use the technology) seems largely met. Systems requiring activation by drivers for each trip are used less often. Owner experience with the latest technologies from other automobile manufacturers should be studied, as well as for vehicles on which technologies are standard (versus optional) equipment. The effectiveness of technologies in preventing and mitigating crashes and injuries, and user acceptance of interfaces, should be

  18. What's the message? A content analysis of newspaper articles about assisted reproductive technology from 2005 to 2011.

    Science.gov (United States)

    King, L; Tulandi, T; Whitley, R; Constantinescu, T; Ells, C; Zelkowitz, P

    2014-06-01

    Infertility and its treatment is the subject of considerable media coverage. In order to evaluate the representation of assisted reproductive technology (ART) in the popular media, we conducted a content analysis of North American newspaper articles. We also explored whether different themes emerged in relation to the implementation of public funding for ART in Quebec, Canada. Print and online newspaper articles from 2005 to 2011 were retrieved using the terms "in-vitro fertilization", "infertility treatment", "assisted reproductive technology", and "IVF treatment". Totally, 719 newspaper articles met inclusion criteria and were coded according to predetermined categories. Risks (63%) and ethical issues (61%) related to ART were most commonly featured. Quebec-based articles were mostly concerned with the politics and financial issues governing ART, and were less likely to report the risks and emotional impact of ART than other North American press. Newspapers tended to emphasize extreme scenarios as well as controversial cases that may not represent the everyday realities of ART. Changes in public policy may also engender shifts in the tone and content of media reports. It is important to establish resources that can inform the public as well as prospective infertility patients about their condition and potential treatment options.

  19. Nature Journal (Selected Articles),

    Science.gov (United States)

    1981-01-26

    in the basic disciplines of modern biology, physics and biophysics. 3. There will be ample scope for this special function in the field of bionics . It...is very suitable for measuring the temperature in locomotives and vessels. Shanghai No. 2 Automatic Instruments Factory Factoryaddress: 788 Hejian Road...philosophy, biology, bionics , biophysics, medicine and the theories of main and collateral channels in traditional Chinese medicine. Naturally, at present

  20. Antenna (Selected Articles),

    Science.gov (United States)

    1981-11-04

    random layout of the antenna (i.e. ’I=O). It is apparent from the figure that in the region of optimal N, the quantities AN and a2 change slowly. With a...introducing phase distribution of the field along the antenna equal to Z2W we can, in the limits of small angles in the region 0o O0 at distance R0 (focal...Shifrin, Ya. S. "Question of the Effect of Fluctuations on the Diffraction Image of a Focusing System," Trudy ARTA No. 46, 1960. 4. Tatarskiy, V. I. Teoria

  1. Antenna (Selected Articles),

    Science.gov (United States)

    1981-10-16

    to the edge of any corrector. For this either the beam guide must be sufficient to short ones, so that ray/beam does not manage still it will...express appreciation to professcr Ya. S. Shifrin for the management /manual of this work and V. I. Zamyatina for the participation in her discussion...branching of energy from the fundamantal circuit in the lateral (with the decoupling of arms on the order of 40 dB) is retained in the brcadband (+-20o/o

  2. Aeronautical Materials (Selected Articles),

    Science.gov (United States)

    1984-03-13

    Ouyang Hui et-al [3] studied the influence of frequency on the da/dN of 30CrMnSiNi2A steel. The employed frequencies were 20cpm (0.33Hz), 800cpm...3] Ouyang Hui et al, The Influence of Frequency on the Crack Propagation Rate of 30CrMnSiNi2A Steel, Internal Materials, Beijing Institute of...1 572326 1 -16623 X 10-- 15-6.0391 8123 64606 14006J 4 2 YH -401N**.j4 1/10 0U468X 10-’ 5.85880 1.914 t.OBxo& 110.40641 00060 67768 1307101 -3.83 YB

  3. International Aviation (Selected Articles),

    Science.gov (United States)

    1981-06-29

    The Thermo- electrical Reaction with Cu in Millivolts/C ° , 8. Tensile 2 2 Strength in kg/cm 2 , 9. Microhardness in kg/cm , 10. Modulus of 2 Elasticity...the structural strenght , elasticity and useful life of instru- ment componets. With gold-based alloys it is possible to manu- facture extremely fine...cobalt to make it easier to magnetize. Of course, the components of this type of metallic glass are not the same as those of ordinary steel . The amount of

  4. Laser Journal (Selected Articles),

    Science.gov (United States)

    1982-09-10

    chronic -33- "ś 7, laryngitis, vocal chord nodule etc, and obtained good results. TREATMENT OF CHRONIC LARYNGITIS WITH HeNe LASER OPTICAL FIBRE Lu Junan...decrease, and excessive menstruation. OBSERVATION ON THE EFFECT OF YAG LASER OPTICAL NEEDLE UPON CANINE VOCAL CHORD AND TONGUE TISSUE Laser Medicine...Research Laboratory, Shanghai Medical School Number 1 Irradiation of canine vocal chord and tongue tissue with a 1.06 micron YAG laser through an optical

  5. Low-level radioactive waste technology: a selected, annotated bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Fore, C.S.; Vaughan, N.D.; Hyder, L.K.

    1980-10-01

    This annotated bibliography of 447 references contains scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on environmental transport, disposal site, and waste treatment studies. The publication covers both domestic and foreign literature for the period 1952 to 1979. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology and Site Resources; Regulatory and Economic Aspects; Transportation Technology; Waste Production; and Waste Treatment. Specialized data fields have been incorporated into the data file to improve the ease and accuracy of locating pertinent references. Specific radionuclides for which data are presented are listed in the Measured Radionuclides field, and specific parameters which affect the migration of these radionuclides are presented in the Measured Parameters field. In addition, each document referenced in this bibliography has been assigned a relevance number to facilitate sorting the documents according to their pertinence to low-level radioactive waste technology. The documents are rated 1, 2, 3, or 4, with 1 indicating direct applicability to low-level radioactive waste technology and 4 indicating that a considerable amount of interpretation is required for the information presented to be applied. The references within each chapter are arranged alphabetically by leading author, corporate affiliation, or title of the document. Indexes are provide for (1) author(s), (2) keywords, (3) subject category, (4) title, (5) geographic location, (6) measured parameters, (7) measured radionuclides, and (8) publication description.

  6. Low-level radioactive waste technology: a selected, annotated bibliography

    International Nuclear Information System (INIS)

    Fore, C.S.; Vaughan, N.D.; Hyder, L.K.

    1980-10-01

    This annotated bibliography of 447 references contains scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on environmental transport, disposal site, and waste treatment studies. The publication covers both domestic and foreign literature for the period 1952 to 1979. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology and Site Resources; Regulatory and Economic Aspects; Transportation Technology; Waste Production; and Waste Treatment. Specialized data fields have been incorporated into the data file to improve the ease and accuracy of locating pertinent references. Specific radionuclides for which data are presented are listed in the Measured Radionuclides field, and specific parameters which affect the migration of these radionuclides are presented in the Measured Parameters field. In addition, each document referenced in this bibliography has been assigned a relevance number to facilitate sorting the documents according to their pertinence to low-level radioactive waste technology. The documents are rated 1, 2, 3, or 4, with 1 indicating direct applicability to low-level radioactive waste technology and 4 indicating that a considerable amount of interpretation is required for the information presented to be applied. The references within each chapter are arranged alphabetically by leading author, corporate affiliation, or title of the document. Indexes are provide for (1) author(s), (2) keywords, (3) subject category, (4) title, (5) geographic location, (6) measured parameters, (7) measured radionuclides, and (8) publication description

  7. Low-level radioactive waste technology: a selected, annotated bibliography

    International Nuclear Information System (INIS)

    Fore, C.S.; Carrier, R.F.; Brewster, R.H.; Hyder, L.K.; Barnes, K.A.

    1981-10-01

    This annotated bibliography of 416 references represents the third in a series to be published by the Hazardous Materials Information Center containing scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on disposal site, environmental transport, and waste treatment studies as well as general reviews on the subject. The publication covers both domestic and foreign literature for the period 1951 to 1981. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology, and Site Resources; Regulatory and Economic Aspects; Social Aspects; Transportation Technology; Waste Production; and Waste Treatment. Entries in each of the chapters are further classified as a field study, laboratory study, theoretical study, or general overview involving one or more of these research areas

  8. Diffusion Patterns in Convergence among High-Technology Industries: A Co-Occurrence-Based Analysis of Newspaper Article Data

    Directory of Open Access Journals (Sweden)

    Hyeokseong Lee

    2016-10-01

    Full Text Available Firms in high-technology industries have faced great technological and market uncertainty and volatility in the past few decades. In order to be competitive and sustainable in this environment, firms have been pursuing technological innovation, product differentiation, vertical integration, and alliances, which eventually drive industry convergence, defined as the process of blurring boundaries between previously distinct industries. Although industry convergence has greatly affected industrial structure and the economy, little research has investigated this phenomenon, especially its diffusion patterns; thus, it is still unclear which industries are converging more rapidly or have a higher potential for convergence. This paper explores these issues by investigating industry convergence in U.S. high-technology industries, using a large set of newspaper articles from 1987 to 2012. We perform a co-occurrence-based analysis to obtain information on industry convergence and estimate its diffusion patterns using an internal-influence logistic model. We find heterogeneous diffusion patterns, depending on convergent-industry pairs and their wide dispersion. In addition, we find that the potential degree of industry convergence is significantly negatively associated with its growth rate, which indicates that a great deal of time will be required for industry convergence between high-technology industries with this high potential to achieve a high degree of convergence.

  9. Attitudes about Sex Selection and Sex Preference in Iranian Couples Referred for Sex Selection Technology

    Science.gov (United States)

    Ahmadi, Seyedeh Fatemeh; Shirzad, Mahdi; Kamali, Koorosh; Ranjbar, Fahimeh; Behjati-Ardakani, Zohreh; Akhondi, Mohammad Mehdi

    2015-01-01

    Background Gender preference is prevalent in some communities and using medical techniques to choose the baby's sex may cause the gender discrimination and gender imbalance in communities. Therefore, evaluating the gender preferences and attitudes towards using sex selection technologies seems to be necessary. Methods This cross-sectional study was conducted in Avicenna Fertility Center. Participants were 100 women with one child who were referred for sex selection. Data were collected through self-developed questionnaires. The questions were designed by the researchers at the experts’ panel. To determine the validity of the questionnaire, the viewpoints of professors specialized in these issues were obtained. The statistical analysis of the data was performed using SPSS software (Version 11.5), and p < 0.05 was considered significant. Results Tendency toward the male was more than female sex (55.5% male, 15.5% female and 28.5% no tendency). Majority of participants agreed with sex selection with medical reason and sex selection in order to balance the family. Women's level of education had positive effect on agreements to fetal sex selection with medical and non-medical reasons (p < 0.001). Conclusion Although gender preferences were toward the male sex but this preference was not very strong. Most participants agreed with non-medical sex selection for balancing the sex composition of their children. It doesn't seem that non-medical sex selection for family balancing causes severe sex imbalance in Iran. PMID:25717434

  10. Technologies of Selective Energy Supply at Evaporation of Food Solutes

    Directory of Open Access Journals (Sweden)

    Burdo O.G.

    2017-04-01

    Full Text Available The aim of the research is to create innovative evaporating equipment that can produce concentrates with a high content of solids, with a low level of thermal effects on raw materials. The significance of the solution of technological problems of the key process of food technologies - concentration of liquid solutions (juices, extracts, etc. is shown. Problems and scientific contradictions are formulated and the hypothesis on using of electromagnetic energy sources for direct energy transfer to solution’s moisture has been offered. The prospects of such an energy effect are proved by the energy management methods. The schemes of fuel energy conversion for the conventional thermal concentration technology and the innovative plant based on the electromagnetic energy generators are presented. By means of the similarity theory the obtained model is transformed to the criterial one depicted kinetic of evaporation process at the electromagnetic field action. The dimensionless capacity of the plant is expressed by the dependence between the Energetic effect number and relative moisture content. The scheme of automated experimental system for study of the evaporation process in the microwave field is shown. The experimental results of juice evaporation are presented. It has been demonstrated that the technologies of selective energy supply represent an effective tool for improvement of juice concentration evaporative plants. The main result of the research is design of the evaporator that allows reaching juice concentrates with °brix 95 at the temperature as low as 35 °С, i.e. 2…3 times superior than traditional technologies.

  11. Recycling and social technologies for sustainability: The Brazilian experience of wastepickers' inclusion in selective collection programs.

    Science.gov (United States)

    Lima, Francisco de Paula Antunes; de Oliveira, Fabiana Goulart

    2017-01-01

    Alternatives are being developed for waste treatment all over the world. Solidary selective collection is a recognized social technology for taking millions of people out of absolute poverty. However, this technology raises crucial questions regarding its nature and development perspective. What can be said of the legitimacy of a social technology that is born from misery and maintains wastepickers in precarious work conditions? This article approaches issues based on the analysis of the wastepickers' work process, highlighting the difficulties and interpersonal conflicts, the strong social bonds and creativity that reveal the potential of efficiency and solidarity of this social technology. The analyses are founded on empirical descriptions of work situations and organizational arrangements that the wastepickers themselves have developed. The observations were made during the work, followed by interviews focused on significant events and behaviors. The contradiction between efficiency and solidarity, which excludes workers from the formal labor market, finds in the associations a solution for people with different capacities. This social technology offers much more than simple survival or exoticism. The wastepickers create a sustainable mode of production, putting together economic, social and environmental criteria in an innovative and fair production technology.

  12. Solid state laser technology for inertial confinement fusion: A collection of articles from ''Energy and Technology Review''

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This paper contains reprinted articles that record several milestones in laser research at LLNL. ''Neodymium-Glass Laser Research and Development at LLNL'' recounts the history of the Laser Program and our work on neodymium-glass lasers. ''Nova Laser Technology'' describes the capabilities of the Nova laser and some of its uses. ''Building Nova: Industry Relations and Technology Transfer'' illustrates the Laboratory's commitment to work with US industry in technology development. ''Managing the Nova Laser Project'' details the organization and close monitoring of costs and schedules during the construction of the Nova laser facility. The article ''Optical Coatings by the Sol-Gel Process,'' describes our chemical process for making the damage-resistant, antireflective silica coatings used on the Nova laser glass. The technical challenges in designing and fabricating the KDP crystal arrays used to convert the light wave frequency of the Nova lasers are reported in ''Frequency Conversion of the Nova Laser.'' Two articles, ''Eliminating Platinum Inclusions in Laser Glass'' and ''Detecting Microscopic Inclusions in Optical Glass,'' describe how we dealt with the problem of damaging metal inclusions in the Nova laser glass. The last article reprinted here, ''Auxilliary Target Chamber for Nova,'' discusses the diversion of two of Nova's ten beamlines into a secondary chamber for the purpose of increasing our capacity for experimentation.

  13. Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

    Science.gov (United States)

    Rosmait, Russell L.

    1996-01-01

    The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

  14. Scaling Impacts in Life Support Architecture and Technology Selection

    Science.gov (United States)

    Lange, Kevin

    2016-01-01

    For long-duration space missions outside of Earth orbit, reliability considerations will drive higher levels of redundancy and/or on-board spares for life support equipment. Component scaling will be a critical element in minimizing overall launch mass while maintaining an acceptable level of system reliability. Building on an earlier reliability study (AIAA 2012-3491), this paper considers the impact of alternative scaling approaches, including the design of technology assemblies and their individual components to maximum, nominal, survival, or other fractional requirements. The optimal level of life support system closure is evaluated for deep-space missions of varying duration using equivalent system mass (ESM) as the comparative basis. Reliability impacts are included in ESM by estimating the number of component spares required to meet a target system reliability. Common cause failures are included in the analysis. ISS and ISS-derived life support technologies are considered along with selected alternatives. This study focusses on minimizing launch mass, which may be enabling for deep-space missions.

  15. Technology selection for offshore underwater small modular reactors

    International Nuclear Information System (INIS)

    Shivan, Koroush; Ballinger, Ronald; Buongiorno, Jacopo; Forsberg, Charles; Kazimi, Mujid; Todreas, Neil

    2016-01-01

    This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030-2040 time frame. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR) designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1) a lead-bismuth fast reactor based on the Russian SVBR-100; (2) a novel organic cooled reactor; (3) an innovative superheated water reactor; (4) a boiling water reactor based on Toshiba's LSBWR; and (5) an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical CO 2 cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50-80%) with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options

  16. Technology selection for offshore underwater small modular reactors

    Energy Technology Data Exchange (ETDEWEB)

    Shivan, Koroush; Ballinger, Ronald; Buongiorno, Jacopo; Forsberg, Charles; Kazimi, Mujid; Todreas, Neil [Dept. of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge (United States)

    2016-12-15

    This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030-2040 time frame. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR) designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1) a lead-bismuth fast reactor based on the Russian SVBR-100; (2) a novel organic cooled reactor; (3) an innovative superheated water reactor; (4) a boiling water reactor based on Toshiba's LSBWR; and (5) an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical CO{sub 2} cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50-80%) with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options.

  17. Technology Selection for Offshore Underwater Small Modular Reactors

    Directory of Open Access Journals (Sweden)

    Koroush Shirvan

    2016-12-01

    Full Text Available This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030–2040 timeframe. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1 a lead–bismuth fast reactor based on the Russian SVBR-100; (2 a novel organic cooled reactor; (3 an innovative superheated water reactor; (4 a boiling water reactor based on Toshiba's LSBWR; and (5 an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical CO2 cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50–80% with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options.

  18. SELECTION OF SUSTAINABLE TECHNOLOGIES FOR COMBUSTION OF BOSNIAN COALS

    Directory of Open Access Journals (Sweden)

    Anes Kazagić

    2010-01-01

    Full Text Available This paper deals with optimization of coal combustion conditions to support selection a sustainable combustion technology and an optimal furnace and boiler design. A methodology for optimization of coal combustion conditions is proposed and demonstrated on the example of Bosnian coals. The properties of Bosnian coals vary widely from one coal basin to the next, even between coal mines within the same basin. Very high percentage of ash (particularly in Bosnian brown coal makes clear certain differences between Bosnian coal types and other world coal types, providing a strong argument for investigating specific problems related to the combustion of Bosnian coals, as well as ways to improve their combustion behaviour. In this work, options of the referent energy system (boiler with different process temperatures, corresponding to the different combustion technologies; pulverised fuel combustion (slag tap or dry bottom furnace and fluidized bed combustion, are under consideration for the coals tested. Sustainability assessment, based on calculation economic and environment indicators, in combination with common low cost planning method, is used for the optimization. The total costs in the lifetime are presented by General index of total costs, calculated on the base of agglomeration of basic economic indicators and the economic indicators derived from environmental indicators. So, proposed methodology is based on identification of those combustion technologies and combustion conditions for coals tested for which the total costs in lifetime of the system under consideration are lowest, provided that all environmental issues of the energy system is fulfilled during the lifetime. Inputs for calculation of the sustainability indicators are provided by the measurements on an experimental furnace with possibility of infinite variation of process temperature, supported by good praxis from the power plants which use the fuels tested and by thermal

  19. Making Artificial Heart Components – Selected Aspects Of Casting Technology

    Directory of Open Access Journals (Sweden)

    Sobczak J.J.

    2015-09-01

    Full Text Available This study shown possibilities of Rapid Prototyping techniques (RP and metal casting simulation software (MCSS, including non inertial reference systems. RP and MCSS have been used in order to design and produce essential elements for artificial heart. Additionally it has been shown possibilities of Fused Deposition Modeling (FDM technique and DodJet technology using prototyped elements of rotodynamic pump. MAGMASOFT® software allowed to verify the cast kit heart valves model. Optical scanner Atos III enabled size verification of experimental elements supplied by rapid prototyping together with metal casting elements. Due to the selection of ceramic materials and assessment of molten metal – ceramic reactivity at high temperatures together with pattern materials selection model it was possible to design, manufacture a ceramic mould for titanium based alloys. The casting structure modification has been carried out by means of high isostatic pressure technique (HIP. The quality assessment of the casting materials has been performed using X-ray fluorescence (XRF, ARL 4460 Optical Emission Spectrometer, metallographic techniques and X-ray computed tomography.

  20. Vulnerabilities in GSM technology and feasibility of selected attacks

    Science.gov (United States)

    Voznak, M.; Prokes, M.; Sevcik, L.; Frnda, J.; Toral-Cruz, Homer; Jakovlev, Sergej; Fazio, Peppino; Mehic, M.; Mikulec, M.

    2015-05-01

    Global System for Mobile communication (GSM) is the most widespread technology for mobile communications in the world and serving over 7 billion users. Since first publication of system documentation there has been notified a potential safety problem's occurrence. Selected types of attacks, based on the analysis of the technical feasibility and the degree of risk of these weaknesses, were implemented and demonstrated in laboratory of the VSB-Technical University of Ostrava, Czech Republic. These vulnerabilities were analyzed and afterwards possible attacks were described. These attacks were implemented using open-source tools, software programmable radio USRP (Universal Software RadioPeripheral) and DVB-T (Digital Video Broadcasting - Terrestrial) receiver. GSM security architecture is being scrutinized since first public releases of its specification mainly pointing out weaknesses in authentication and ciphering mechanisms. This contribution also summarizes practically proofed and used scenarios that are performed using opensource software tools and variety of scripts mostly written in Python. Main goal of this paper is in analyzing security issues in GSM network and practical demonstration of selected attacks.

  1. A Review on influencing criteria for selecting supplier of information technology services in the hospital.

    Science.gov (United States)

    Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

    2014-01-01

    Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals.

  2. A Review on influencing criteria for selecting supplier of information technology services in the hospital

    Science.gov (United States)

    Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

    2014-01-01

    Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals. PMID:25540781

  3. Attitudes about Sex Selection and Sex Preference in Iranian Couples Referred for Sex Selection Technology.

    Science.gov (United States)

    Ahmadi, Seyedeh Fatemeh; Shirzad, Mahdi; Kamali, Koorosh; Ranjbar, Fahimeh; Behjati-Ardakani, Zohreh; Akhondi, Mohammad Mehdi

    2015-01-01

    Gender preference is prevalent in some communities and using medical techniques to choose the baby's sex may cause the gender discrimination and gender imbalance in communities. Therefore, evaluating the gender preferences and attitudes towards using sex selection technologies seems to be necessary. This cross-sectional study was conducted in Avicenna Fertility Center. Participants were 100 women with one child who were referred for sex selection. Data were collected through self-developed questionnaires. The questions were designed by the researchers at the experts' panel. To determine the validity of the questionnaire, the viewpoints of professors specialized in these issues were obtained. The statistical analysis of the data was performed using SPSS software (Version 11.5), and p gender preferences were toward the male sex but this preference was not very strong. Most participants agreed with non-medical sex selection for balancing the sex composition of their children. It doesn't seem that non-medical sex selection for family balancing causes severe sex imbalance in Iran.

  4. 76 FR 3877 - Effectiveness of Federal Agency Participation in Standardization in Select Technology Sectors for...

    Science.gov (United States)

    2011-01-21

    ... following technologies: 1. Smart Grid. 2. Health Information Technology. 3. Cyber Security. 4. Emergency... National Institute of Standards and Technology Effectiveness of Federal Agency Participation in Standardization in Select Technology Sectors for National Science and Technology Council's Sub-Committee on...

  5. SERIES ARTICLES

    Indian Academy of Sciences (India)

    IAS Admin

    Inside Back Cover. Flowering Trees. (Credit: K Sankara Rao, IISc) ifference using CROs by Lissajous Method. Article-in-a-Box. John Dalton. S Natarajan. 2. Classroom. The Importance of. Selecting Suitable Com- ponents and Apparatus in Physics Laboratories. Vijay H Raybagkar. 76. Classics. On the Constitution of Bodies.

  6. A Novel Hybrid Approach for Technology Selection in the Information Technology Industry

    Directory of Open Access Journals (Sweden)

    Nima Garoosi Mokhtarzadeh

    2018-03-01

    Full Text Available High-tech companies are rapidly growing in the world. Research and development (hereafter R&D department strength is the main asset that allows a firm to achieve a competitive advantage in high-tech businesses. The allocated budget to this sector is finite; thus, integration, human resource, risk and budget limitations should be considered to choose the most valuable project in the best portion of time. This paper investigates a case study from a high-tech company in Iran to prioritize the most attractive technologies for the R&D department. The case consists of twenty three technology options and the goal is to find the most attractive projects to sort them out for implementation in the R&D department. In this research, scholars proposed the best–worst method (henceforth BWM to find the weight of the criteria of the attractive technologies in first step and utilize the newly developed method total area based on orthogonal vectors (henceforward TAOV to sort the selected technologies based upon the identified criteria. Project integration is one of the least-noticed subjects in scientific papers; therefore, the researchers presented a zero or one linear programming (ZOLP model to optimize and schedule the implementation procedure on the project risk, budget and time limitation simultaneously. The results indicate that starting few but attractive projects in the first years and postponing the rest to the future, helps a firm to manage funds and gain profit with the least amount of risk.

  7. The Importance of Knowledge Management in Terms of Increasing Social Capital in Selected Slovene Technology Parks

    Directory of Open Access Journals (Sweden)

    Riko Novak

    2013-12-01

    Full Text Available This article investigates the importance of knowledge management (KM and how it is influencing social capital (SC in selected organisations that are members of Slovene technology parks. The purpose of this article is to point out statistical important characteristics between the dependant variable and several independent variables on the basis of preliminary studied empirical data based on a population of 667 organisations chosen from the subjects of the innovative environment database maintained by the Public Agency of the Republic of Slovenia for Entrepreneurship and Foreign Investments (JAPTI. On the basis of a multivariate regression analysis we wanted to present empirical findings, namely, whether communication technologies and the capability (ability of the employed to access information sources influences KM. With this article we want to present the final findings which define the development of a conceptual framework for understanding the influence of KM in small and medium sized companies on the development of social capital. We came to the conclusion that in an organisation the importance of intellectual and social capital, intangible capital assets and their continuous measurement has to be emphasised in order to increase the importance (awareness of KM.

  8. Forthcoming Articles

    Indian Academy of Sciences (India)

    NPadmaja

    2018-03-07

    Mar 7, 2018 ... NiFe2O4 nanoparticles decorated activated carbon nanocomposite based electrochemical sensor for selective detection of dopamine in presence of uric acid and ascorbic acid. Sivasubramanian. R rss@psgias.ac.in. PSG College of. Technology,. Coimbatore. 10 - Dec. 4. 2. 8. February. Published. Online.

  9. Research Article

    African Journals Online (AJOL)

    2016-06-13

    Jun 13, 2016 ... various aspects of social, economic, technological, etc., today, with the increasing development of knowledge ... the long history of its use in human life has not much experience in academia environments as an .... environment in different ways throughout the entire life cycle stages include selection of raw.

  10. Near minimum-time maneuvers of the advanced space structures technology research experiment (ASTREX) test article: Theory and experiments

    Science.gov (United States)

    Vadali, Srinivas R.; Carter, Michael T.

    1994-01-01

    The Phillips Laboratory at the Edwards Air Force Base has developed the Advanced Space Structures Technology Research Experiment (ASTREX) facility to serve as a testbed for demonstrating the applicability of proven theories to the challenges of spacecraft maneuvers and structural control. This report describes the work performed on the ASTREX test article by Texas A&M University under contract NAS119373 as a part of the Control-Structure Interaction (CSI) Guest Investigator Program. The focus of this work is on maneuvering the ASTREX test article with compressed air thrusters that can be throttled, while attenuating structural excitation. The theoretical foundation for designing the near minimum-time thrust commands is based on the generation of smooth, parameterized optimal open-loop control profiles, and the determination of control laws for final position regulation and tracking using Lyapunov stability theory. Details of the theory, mathematical modeling, model updating, and compensation for the presence of 'real world' effects are described and the experimental results are presented. The results show an excellent match between theory and experiments.

  11. The distribution of P-values in medical research articles suggested selective reporting associated with statistical significance.

    Science.gov (United States)

    Perneger, Thomas V; Combescure, Christophe

    2017-07-01

    Published P-values provide a window into the global enterprise of medical research. The aim of this study was to use the distribution of published P-values to estimate the relative frequencies of null and alternative hypotheses and to seek irregularities suggestive of publication bias. This cross-sectional study included P-values published in 120 medical research articles in 2016 (30 each from the BMJ, JAMA, Lancet, and New England Journal of Medicine). The observed distribution of P-values was compared with expected distributions under the null hypothesis (i.e., uniform between 0 and 1) and the alternative hypothesis (strictly decreasing from 0 to 1). P-values were categorized according to conventional levels of statistical significance and in one-percent intervals. Among 4,158 recorded P-values, 26.1% were highly significant (P journals are not a random sample of null and alternative hypotheses but that selective reporting is prevalent. In particular, significant results are about twice as likely to be reported as nonsignificant results. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. A Machine Learning Approach to Reducing the Work of Experts in Article Selection from Database: A Case Study for Regulatory Relations of S. cerevisiae Genes in MEDLINE.

    Science.gov (United States)

    Usuzaka; Sim; Tanaka; Matsuno; Miyano

    1998-01-01

    We consider the problem of selecting the articles of experts' interest from a literature database with the assistance of a machine learning system. For this purpose, we propose the rough reading strategy which combines the experts' knowledge with the machine learning system. For the articles converted through the rough reading strategy, we employ the learning system BONSAI and apply it for discovering rules which may reduce the work of experts in selecting the articles. Furthermore, we devise an algorithm which iterates the above procedure until almost all records of experts' interest are selected. Experimental results by using the articles from Cell show that almost all records of experts' interest are selected while reducing the works of experts drastically.

  13. The Mixed Waste Management Facility: Technology selection and implementation plan, Part 2, Support processes

    International Nuclear Information System (INIS)

    Streit, R.D.; Couture, S.A.

    1995-03-01

    The purpose of this document is to establish the foundation for the selection and implementation of technologies to be demonstrated in the Mixed Waste Management Facility, and to select the technologies for initial pilot-scale demonstration. Criteria are defined for judging demonstration technologies, and the framework for future technology selection is established. On the basis of these criteria, an initial suite of technologies was chosen, and the demonstration implementation scheme was developed. Part 1, previously released, addresses the selection of the primary processes. Part II addresses process support systems that are considered ''demonstration technologies.'' Other support technologies, e.g., facility off-gas, receiving and shipping, and water treatment, while part of the integrated demonstration, use best available commercial equipment and are not selected against the demonstration technology criteria

  14. Survey of the situation of technology succession. Databases of articles including in industrial technology museums; Gijutsu keisho jokyo chosa. Sangyo gijutsu hakubutsukan shuzohin D.B. hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To promote the succession of history of and the creative use of industrial science technologies, the paper made lists and databases of the articles of industrial technology museums and material halls in Japan. Record/preservation and collection/systematization of history of the industrial technology is useful for forming bases necessary for promotion of future research/development and international contribution. Museums and material halls are the fields for making comprehensive and practical activities. The data were made as one of the basic databases as the first step for promoting activities for examining the technical succession situation in a long term range continuously and systematically. In the classification of the data, the energy relation was divided into electric power, nuclear power, oil, coal, gas and energy in general. Others were classified into metal/mine, electricity/electronics/communication, chemistry/food, ship building/heavy machinery, printing/precision instrument, and textile/spinning. Moreover, the traffic relation was classified into railroad, automobiles/two-wheeled vehicles, airline/space, and ships. Items were also set of life relation, civil engineering/architecture, and general. The total number of the museums for the survey reached 208.

  15. [Acupoints selection rules analysis of ancient acupuncture for urinary incontinence based on data mining technology].

    Science.gov (United States)

    Zhang, Wei; Tan, Zhigao; Cao, Juanshu; Gong, Houwu; Qin, Zuoai; Zhong, Feng; Cao, Yue; Wei, Yanrong

    2015-12-01

    Based on ancient literature of acupuncture in Canon of Chinese Medicine (4th edition), the articles regarding acupuncture for urinary incontinence were retrieved and collected to establish a database. By Weka data mining software, the multi-level association rules analysis method was applied to analyze the acupoints selection characteristics and rules of ancient acupuncture for treatment of urinary incontinence. Totally 356 articles of acupuncture for urinary incontinence were collected, involving 41 acupoints with a total frequency of 364. As a result, (1) the acupoints in the yin-meridian of hand and foot were highly valued, as the frequency of acupoints in yin-meridians was 2.6 times than that in yang-meridians, and the frequency of acupoints selected was the most in the liver meridian of foot-jueyin; (2) the acupoints in bladder meridian of foot-taiyang were also highly valued, and among three yang-meridians of foot, the frequency of acupoints in the bladder meridian of foot-taiyang was 54, accounting for 65.85% (54/82); (3) more acupoints selected were located in the lower limbs and abdomen; (4) specific acupoints in above meridians were mostly selected, presenting 73.2% (30/41) to the ratio of number and 79.4% (289/364) to the frequency, respectively; (5) Zhongji (CV 3), the front-mu point of bladder meridian, was seldom selected in the ancient acupuncture literature, which was different from modern literature reports. The results show that urinary incontinence belongs to external genitalia diseases, which should be treated from yin, indicating more yin-meridians be used and special acupoints be focused on. It is essential to focus inheritance and innovation in TCM clinical treatment, and applying data mining technology to ancient literature of acupuncture could provide classic theory basis for TCM clinical treatment.

  16. Analysis of scientific production in information technology: A panoramic study of articles published by librarianship professors from the UnB

    Directory of Open Access Journals (Sweden)

    Bruna Guedes Martins da Silva

    2015-07-01

    Full Text Available Objective. Research that objective to analyze the scientific production in information technology by professors of biblioteconomy, Faculty of Information Science, University of Brasilia (Brazil, through the Curriculum Lattes Platform of teachers cited. Method. Adopts inductive method, bibliographical research and technical, quantitative research and data collection approach and document analysis from Lattes (Lattes Platform of the selected teachers. Results. Presents that the areas databases, libraries and digital repositories as that have the greatest production, metadata and library automation system areas as those with lack of jobs published, the most used types of records are the proceedings of congress, course conclusion papers and journal articles, as well the thesis and extended abstracts are little used, besides identifying other areas not listed in the original scope of work such as electronic document management, digital preservation, information security, information architecture, hypertext and applied technologies. Conclusions. The analysis of scientific production helps in decision-making, idealizes an overview of professors' research, and helps understand how certain area behaves and its main composition of subjects.

  17. Technology-enabled employee selection: Tweaking the system for better person-environment fit

    DEFF Research Database (Denmark)

    Holm, Anna B.

    Organizations increasingly use information and communication technologies to facilitate their employee selection process. The practice is commonly referred to as e-selection. Recent research has shown that e-selection can significantly improve the efficiency of assessment and selection. However......, organizations also strive to hire the best possible candidates and seek to improve effectiveness of their selection process and achieve better person–environment (PE) fit. The presented research reviews existing literature on PE fit and e-selection and puts forward a heuristic model of technology......-facilitated selection process that seeks to maximize the PE fit from the organization’s perspective....

  18. Injection moulding and selective metallisation technologies for polymer Microsystems

    DEFF Research Database (Denmark)

    Tenchine, L.; Gout, S.; Dessors, S.

    2016-01-01

    The present paper describes how developing and optimizing high-throughput integrated technologies for theproduction of miniaturised multi-material and multi-functional components at industrial scale. Based on 2 industrialdemonstrators (a band diplexer and a micro aeraulic device), the paper shows...... that many technologies have to becombined to succeed: injection moulding process, copper plating, laser ablation, laser welding, glue welding...

  19. Biogas technology research in selected sub-Saharan African countries

    African Journals Online (AJOL)

    STORAGESEVER

    2009-01-19

    Saharan Africa. INTRODUCTION. In Africa, water pollution and access to energy resources present challenges to human health, ..... Industries and Trade through its Centre for Agriculture. Mechanisation and Rural Technology ...

  20. Examination of Assessment Practices for Engineering Design Projects in Secondary Technology Education (Second Article in 3-Part Series)

    Science.gov (United States)

    Kelley, Todd R.; Wicklein, Robert C.

    2009-01-01

    Based on the efforts to infuse engineering practices within the technology education curriculum it is appropriate to now investigate how technology education teachers are assessing engineering design activities within their classrooms. This descriptive study drew a full sample of high school technology teachers from the current International…

  1. PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

    Energy Technology Data Exchange (ETDEWEB)

    CONRAD EA

    2008-08-12

    This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel.

  2. PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

    International Nuclear Information System (INIS)

    CONRAD EA

    2008-01-01

    This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel

  3. Implications of using clean technologies to power selected ASEAN countries

    International Nuclear Information System (INIS)

    Das, Anjana; Ahlgren, Erik O.

    2010-01-01

    This paper focuses on energy system development of the three largest Association of South East Asian Nations (ASEAN) countries: Indonesia, Philippines and Vietnam. The energy infrastructures in these counties are in the process of rapid development and, therefore, technology choices are critical. Applying the energy system model MARKAL and scenario analysis, this paper examines and quantifies the role of clean and advanced energy technologies for efficient local resource exploitation and improving energy security and environmental conditions. The main focus is on the power sector and the paper also addresses the potential ASEAN markets for European energy technologies. The paper concludes that there is a large potential market for clean and advanced energy technologies in the studied countries. If adopted, these technologies will bring several benefits like reduction in primary energy requirement, reduced investments requirement in the power sector and other parts of the energy infrastructure, reduced import of primary energy, reduced CO 2 emissions and local pollution, reduced energy system costs and marginal cost of electricity supply. Finally, barriers for transfer and diffusion of advanced energy technologies are discussed.

  4. Use of reproductive technology for sex selection for nonmedical reasons.

    Science.gov (United States)

    2015-06-01

    Because these practices are ethically controversial, clinics are encouraged to develop and make available their policies on the provision of nonmedical sex selection, and to accommodate their employees' decisions about whether or not to participate in such treatment. Practitioners offering assisted reproductive services are under no ethical obligation to provide or refuse to provide nonmedically indicated methods of sex selection. This document replaces two documents previously published by the ASRM Ethics Committee, titled, "Sex selection and preimplantation genetic diagnosis" (Fertil Steril 2004;82:S245-8) and "Preconception gender selection for nonmedical reasons" (Fertil Steril 2004;82:S232-5). Copyright © 2015 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  5. Telemetry Measurement of Selected Biological Signal Using Bluetooth Technology

    Directory of Open Access Journals (Sweden)

    Martin Cerny

    2005-01-01

    Full Text Available This work treats of using the Bluetooth technology in biomedical engineering. The Bluetooth is used for transmission of measured data from pulse oximeter, ECG and monitor of blood pressure. OEM modules realize the devices for pulse oximetry and ECG. Both these realized devices can communicate with computer by Bluetooth technology and standard serial link too. The realized system of measuring devices is very flexible and mobile, because the Bluetooth technology is used and accumulators can supply the realized devices. It is possible to measure other physical values converted to voltage, because the used OEM module for pulse oximetry include A/D converter. The part of this work is software visualisation of measured values to.

  6. Selective anodising technologies for obtaining translucent micro structures

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Møller, Per; Jarnov, Christian

    2006-01-01

    Anodising of aluminium is a well-known technology usually applied to surface treatment. With this technology a transparent layer of oxide is established on the surface of a workpiece. For the establishment of components in aluminium with certain light transmitting areas anodising was investigated....... A process sequence involving application of photoresist, lithography using UV light, development of photoresist and subsequent anodising was established and investigated. The effect of various process parameters, material composition as well as pattern layout on the final component quality was investigated....... It was found that with this technology it is possible to create light transmitting areas on aluminium workpieces consisting of either dot-like structures or continuous patterns....

  7. Selected reading on introduction to pressure tube technology

    International Nuclear Information System (INIS)

    Causey, A.R.; Coleman, C.E.; Ells, C.E.

    1981-10-01

    Four lectures on pressure tube technology were presented at Sheridan Park, Ontario, on 1981 June 1. The titles were 'Pressure Tubes and Their Operational Environment', 'Fabrication, Inspection and Properties of Current Production Pressure Tubes', 'In-Reactor Deformation of Fuel Channels', and 'Potential Failure Modes in Pressure Tubes'. This report lists the references used in preparing the lectures. It is intended to provide a starting point in reading for people who need to become familiar with pressure tube technology but have little prior knowledge of the topic

  8. PECVD silicon carbide surface micromachining technology and selected MEMS applications

    NARCIS (Netherlands)

    Rajaraman, V.; Pakula, L.S.; Yang, H.; French, P.J.; Sarro, P.M.

    2011-01-01

    Attractive material properties of plasma enhanced chemical vapour deposited (PECVD) silicon carbide (SiC) when combined with CMOS-compatible low thermal budget processing provides an ideal technology platform for developing various microelectromechanical systems (MEMS) devices and merging them with

  9. Selection Processes and Appropriability in Art, Science and Technology

    NARCIS (Netherlands)

    Wijnberg, N.M.

    1995-01-01

    Recently, there has been a mutually beneficial interchange of models and ideas between the sociology of science and the economics of technological innovation. Concepts such as the "paradigm" and the "network" seem to lend themselves to useful application in both fields. To these is added the concept

  10. LEARNING MATERIALS SELECTION FOR DIFFERENTIATED INSTRUCTION OF ENGLISH FOR SPECIFIC PURPOSES OF FUTURE PROFESSIONALS IN THE FIELD OF INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Oksana Synekop

    2017-09-01

    Full Text Available In conditions of differentiation the learning materials selection will optimize the training English for Specific Purposes of the future professionals in the field of information technology at university level. The purpose of the article is to define the basic unit of learning material, the factors of influence on the learning material selection, principles, criteria and the procedure of learning material selection in this paper. Reviewing the scientific achievements in the learning material selection in teaching English has become a basis for defining the factors of influence, principles and criteria in the research. The basic unit of learning material (learning English text for professional purposes is outlined. The factors of influence and principles (correspondence of learning materials to professional interests and needs of information technology students; necessary ability and accessibility; regarding the linguistic and stylistic necessity and sufficiency; availability of Internet sources information of the learning material selection are defined. Also, the qualitative criteria (authenticity; professional significance, relevance and informativeness; conformity of foreign language level and intellectual development of students; variety of genres and forms of speech, their sufficient filling by linguistic material; coherence, integrity, consistency, semantic completeness; topic conformity; situation conformity; unlimited access, reliability and exemplarity of Internet sources and the quantitative criteria (the amount of material of the learning material selection are highlighted. The process of English for Specific Purposes material selection (defining the disciplines of different cycles; defining spheres and related topics; outlining situations, communicative roles and intentions of professional communication; specifying the sources of selection; evaluating the texts; analysis of the knowledge, skills and sub-skills required for the

  11. Selected Test Results from the Encell Technology Nickel Iron Battery

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Summer Kamal Rhodes [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Advanced Power Sources R& D; Baca, Wes Edmund [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Advanced Power Sources R& D; Avedikian, Kristan [Encell Technology, Alachua, FL (United States)

    2014-09-01

    The performance of the Encell Nickel Iron (NiFe) battery was measured. Tests included capacity, capacity as a function of rate, capacity as a function of temperature, charge retention (28-day), efficiency, accelerated life projection, and water refill evaluation. The goal of this work was to evaluate the general performance of the Encell NiFe battery technology for stationary applications and demonstrate the chemistry's capabilities in extreme conditions. Test results have indicated that the Encell NiFe battery technology can provide power levels up to the 6C discharge rate, ampere-hour efficiency above 70%. In summary, the Encell batteries have met performance metrics established by the manufacturer. Long-term cycle tests are not included in this report. A cycle test at elevated temperature was run, funded by the manufacturer, which Encell uses to predict long-term cycling performance, and which passed their prescribed metrics.

  12. Selecting e-Purse Smart Card Technology via Fuzzy AHP and ANP

    Directory of Open Access Journals (Sweden)

    Nurgül Demirtaş

    2014-01-01

    Full Text Available Developments in the information technologies provide important advantages to consumers and companies. Nowadays, smart card technology starts to use e-purse applications. The aim of this paper is to identify the most important decision criteria to select the best card technology. In this study, at first smart card and multiple selection techniques were explained. Then the best card technology was selected for an e-purse application. The three types of card technologies were examined and the most important criteria were taken into account by the software developer while they develop card software. Fuzzy analytic hierarchy process (FAHP and analytical network process (ANP techniques were used to compare smart card technologies.

  13. Toward a technology of derived stimulus relations: an analysis of articles published in the journal of applied behavior analysis, 1992-2009.

    Science.gov (United States)

    Rehfeldt, Ruth Anne

    2011-01-01

    Every article on stimulus equivalence or derived stimulus relations published in the Journal of Applied Behavior Analysis was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure (automated vs. tabletop), stimuli, and stimulus sensory modality; types of relations targeted and emergent skills demonstrated by participants; and presence versus absence of evaluation of generalization and maintenance. In most respects, published reports suggested the possibility of applied technologies but left the difficult work of technology development to future investigations, suggestions for which are provided.

  14. Smartphone technologies and Bayesian networks to assess shorebird habitat selection

    Science.gov (United States)

    Zeigler, Sara; Thieler, E. Robert; Gutierrez, Ben; Plant, Nathaniel G.; Hines, Megan K.; Fraser, James D.; Catlin, Daniel H.; Karpanty, Sarah M.

    2017-01-01

    Understanding patterns of habitat selection across a species’ geographic distribution can be critical for adequately managing populations and planning for habitat loss and related threats. However, studies of habitat selection can be time consuming and expensive over broad spatial scales, and a lack of standardized monitoring targets or methods can impede the generalization of site-based studies. Our objective was to collaborate with natural resource managers to define available nesting habitat for piping plovers (Charadrius melodus) throughout their U.S. Atlantic coast distribution from Maine to North Carolina, with a goal of providing science that could inform habitat management in response to sea-level rise. We characterized a data collection and analysis approach as being effective if it provided low-cost collection of standardized habitat-selection data across the species’ breeding range within 1–2 nesting seasons and accurate nesting location predictions. In the method developed, >30 managers and conservation practitioners from government agencies and private organizations used a smartphone application, “iPlover,” to collect data on landcover characteristics at piping plover nest locations and random points on 83 beaches and barrier islands in 2014 and 2015. We analyzed these data with a Bayesian network that predicted the probability a specific combination of landcover variables would be associated with a nesting site. Although we focused on a shorebird, our approach can be modified for other taxa. Results showed that the Bayesian network performed well in predicting habitat availability and confirmed predicted habitat preferences across the Atlantic coast breeding range of the piping plover. We used the Bayesian network to map areas with a high probability of containing nesting habitat on the Rockaway Peninsula in New York, USA, as an example application. Our approach facilitated the collation of evidence-based information on habitat selection

  15. Status of clean gene (selection marker-free) technology

    African Journals Online (AJOL)

    SERVER

    2007-12-28

    Dec 28, 2007 ... (MAT) with positive selection. Ebinuma et al. 1997. Does not require sexual crossing. (MAT vector pNI2106 with Ac/Ds system). A. Rice. I-RS/dAc-IRS- Ds-. aphIV- Ds. RS / Ds system. Excision frequency 0-70%. Frequency of transposition event was 44% and 38% in two cases. Transposition was 20% (10 of ...

  16. Performance-Based Technology Selection Filter description report. INEL Buried Waste Integrated Demonstration System Analysis project

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

  17. Selected aspects of cogeneration technology in distributed energy applications

    Science.gov (United States)

    Zuchora, Konrad

    2017-08-01

    The paper presents an opinion on the use of distributed cogeneration technologies in the power industry. It offers worked out experiences and views on the idea of using renewable energy sources in the conventional power industry. The effects of the work done are analysed arguments concerning the use of cogeneration and renewable energy sources in the micropower industry, and developed ways of the functioning of the distributed energy generation system. The publication presents conclusions and simulation results of the criterial work of a micropower system containing in its structure renewable energy sources and a cogeneration unit.

  18. Toward a Technology of Derived Stimulus Relations: An Analysis of Articles Published in the "Journal of Applied Behavior Analysis," 1992-2009

    Science.gov (United States)

    Rehfeldt, Ruth Anne

    2011-01-01

    Every article on stimulus equivalence or derived stimulus relations published in the "Journal of Applied Behavior Analysis" was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure automated vs. tabletop), stimuli, and stimulus sensory modality; types of…

  19. Fuzzy Multicriteria Model for Selection of Vibration Technology

    Directory of Open Access Journals (Sweden)

    María Carmen Carnero

    2016-01-01

    Full Text Available The benefits of applying the vibration analysis program are well known and have been so for decades. A large number of contributions have been produced discussing new diagnostic, signal treatment, technical parameter analysis, and prognosis techniques. However, to obtain the expected benefits from a vibration analysis program, it is necessary to choose the instrumentation which guarantees the best results. Despite its importance, in the literature, there are no models to assist in taking this decision. This research describes an objective model using Fuzzy Analytic Hierarchy Process (FAHP to make a choice of the most suitable technology among portable vibration analysers. The aim is to create an easy-to-use model for processing, manufacturing, services, and research organizations, to guarantee adequate decision-making in the choice of vibration analysis technology. The model described recognises that judgements are often based on ambiguous, imprecise, or inadequate information that cannot provide precise values. The model incorporates judgements from several decision-makers who are experts in the field of vibration analysis, maintenance, and electronic devices. The model has been applied to a Health Care Organization.

  20. Decision analysis for the selection of tank waste retrieval technology

    International Nuclear Information System (INIS)

    DAVIS, FREDDIE J.; DEWEESE, GREGORY C.; PICKETT, WILLIAM W.

    2000-01-01

    The objective of this report is to supplement the C-104 Alternatives Generation and Analysis (AGA) by providing a decision analysis for the alternative technologies described therein. The decision analysis used the Multi-Attribute Utility Analysis (MUA) technique. To the extent possible information will come from the AGA. Where data are not available, elicitation of expert opinion or engineering judgment is used and reviewed by the authors of the AGA. A key element of this particular analysis is the consideration of varying perspectives of parties interested in or affected by the decision. The six alternatives discussed are: sluicing; sluicing with vehicle mounted transfer pump; borehole mining; vehicle with attached sluicing nozzle and pump; articulated arm with attached sluicing nozzle; and mechanical dry retrieval. These are evaluated using four attributes, namely: schedule, cost, environmental impact, and safety

  1. Effects on inlet technology on cruise speed selection

    Science.gov (United States)

    Bangert, L. H.; Santman, D. M.; Horie, G.; Miller, L. D.

    1980-01-01

    The impact of cruise speed on technology level for certain aircraft components is examined. External-compression inlets were compared with mixed compression, self starting inlets at cruise Mach numbers of 2.0 and 2.3. Inlet engine combinations that provided the greatest aircraft range were identified. Results show that increased transonic to cruise corrected air flow ratio gives decreased range for missions dominated by supersonic cruise. It is also found important that inlets be designed to minimize spillage drag at subsonic cruise, because of the need for efficient performance for overland operations. The external compression inlet emerged as the probable first choice at Mach 2.0, while the self starting inlet was the probable first choice at Mach 2.3. Airframe propulsion system interference effects were significant, and further study is needed to assess the existing design methods and to develop improvements.

  2. Reliability Impacts in Life Support Architecture and Technology Selection

    Science.gov (United States)

    Lange Kevin E.; Anderson, Molly S.

    2012-01-01

    Quantitative assessments of system reliability and equivalent system mass (ESM) were made for different life support architectures based primarily on International Space Station technologies. The analysis was applied to a one-year deep-space mission. System reliability was increased by adding redundancy and spares, which added to the ESM. Results were thus obtained allowing a comparison of the ESM for each architecture at equivalent levels of reliability. Although the analysis contains numerous simplifications and uncertainties, the results suggest that achieving necessary reliabilities for deep-space missions will add substantially to the life support ESM and could influence the optimal degree of life support closure. Approaches for reducing reliability impacts were investigated and are discussed.

  3. Decision analysis for the selection of tank waste retrieval technology

    Energy Technology Data Exchange (ETDEWEB)

    DAVIS,FREDDIE J.; DEWEESE,GREGORY C.; PICKETT,WILLIAM W.

    2000-03-01

    The objective of this report is to supplement the C-104 Alternatives Generation and Analysis (AGA) by providing a decision analysis for the alternative technologies described therein. The decision analysis used the Multi-Attribute Utility Analysis (MUA) technique. To the extent possible information will come from the AGA. Where data are not available, elicitation of expert opinion or engineering judgment is used and reviewed by the authors of the AGA. A key element of this particular analysis is the consideration of varying perspectives of parties interested in or affected by the decision. The six alternatives discussed are: sluicing; sluicing with vehicle mounted transfer pump; borehole mining; vehicle with attached sluicing nozzle and pump; articulated arm with attached sluicing nozzle; and mechanical dry retrieval. These are evaluated using four attributes, namely: schedule, cost, environmental impact, and safety.

  4. Evaluation and Selection of Technology Concepts for a Hypersonic High Speed Standoff Missile

    National Research Council Canada - National Science Library

    Roth, Bryce

    1999-01-01

    This paper describes the application of a method for technology concept selection to the design of a hypersonic high-speed standoff missile capable of achieving pin-point strike of long-range targets...

  5. A Technology Selection Framework for Integrating Manufacturing within a Supply Chain

    DEFF Research Database (Denmark)

    Farooq, Sami; O' Brien, Chris

    2012-01-01

    ) approach combined with Strategic Assessment Model (SAM) to evaluate and select the technologies appropriate for providing overall competitive advantage. The framework is intended to assist industrial managers in promoting manufacturing and supply chain collaboration and coordination by including intra......This paper describes a structured analytical approach for selecting a manufacturing technology. A framework consisting of six integrated steps is proposed by considering the growing importance of supply chains in manufacturing organisations. The framework makes use of Analytical Hierarchy (AHP...

  6. Trends in Educational Technology through the Lens of the Highly Cited Articles Published in the Journal of Educational Technology and Society

    Science.gov (United States)

    Kinshuk; Huang, Hui-Wen; Sampson, Demetrios; Chen, Nian-Shing

    2013-01-01

    The advent of the Internet, World-Wide Web and more recently, advanced technologies such as mobile, sensor and location technologies have changed the way people interact with each other, their lifestyle and almost every other aspect of life. Educational sector is not immune from such effects even if the rate of change is far slower than many other…

  7. Use of RFID and Web 2.0 technologies to improve inventory management in South African enterprises [Journal article

    CSIR Research Space (South Africa)

    Mathaba, S

    2011-01-01

    Full Text Available . On the other hand Web 2.0 tools promote the communication of people through their phones or desktop computers. The collaboration of these two technologies could improve inventory management. A comprehensive literature survey is conducted on inventory management...

  8. Software Technologies - 8th International Joint Conference, ICSOFT 2013 : Revised Selected Papers

    NARCIS (Netherlands)

    Cordeiro, José; van Sinderen, Marten J.

    2014-01-01

    The present book includes extended and revised versions of a set of selected papers from the 8th International Joint Conference on Software Technologies (ICSOFT 2013), which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information,

  9. GREY STATISTICS METHOD OF TECHNOLOGY SELECTION FOR ADVANCED PUBLIC TRANSPORTATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Chien Hung WEI

    2003-01-01

    Full Text Available Taiwan is involved in intelligent transportation systems planning, and is now selecting its prior focus areas for investment and development. The high social and economic impact associated with which intelligent transportation systems technology are chosen explains the efforts of various electronics and transportation corporations for developing intelligent transportation systems technology to expand their business opportunities. However, there has been no detailed research conducted with regard to selecting technology for advanced public transportation systems in Taiwan. Thus, the present paper demonstrates a grey statistics method integrated with a scenario method for solving the problem of selecting advanced public transportation systems technology for Taiwan. A comprehensive questionnaire survey was conducted to demonstrate the effectiveness of the grey statistics method. The proposed approach indicated that contactless smart card technology is the appropriate technology for Taiwan to develop in the near future. The significance of our research results implies that the grey statistics method is an effective method for selecting advanced public transportation systems technologies. We feel our information will be beneficial to the private sector for developing an appropriate intelligent transportation systems technology strategy.

  10. Exploring the Use of Information Communication Technologies by Selected Caribbean Extension Officers

    Science.gov (United States)

    Strong, Robert; Ganpat, Wayne; Harder, Amy; Irby, Travis L.; Lindner, James R.

    2014-01-01

    Purpose: The purpose of this study was to describe selected Caribbean extension officers' technology preferences and examine factors that may affect their technology preferences. Design/methodology/approach: The sample consisted of extension officers (N = 119) participating in professional development training sessions in Grenada, Belize and Saint…

  11. An Advanced Technology Selection Model using Neuro Fuzzy Algorithm for Electronic Toll Collection System

    OpenAIRE

    D.R.Kalbande; Priyank Singhal; Nilesh Deotale; Sumiran Shah; G.T.Thampi

    2011-01-01

    Selecting an optimum advanced technology system for an organization is one of the most crucial issues in any industry. Any technology system which makes business process more efficient and business management more simplified is one of the important Information System (IS) to the organization. The comprehensive framework is a three-phase approach which introduces two main ideas, one is the adopting of the McCall software quality model which is extracted from technology management essentials, a...

  12. Forthcoming Articles

    Indian Academy of Sciences (India)

    Since January 2016, the Journal of Astrophysics and Astronomy has moved to Continuous Article Publishing (CAP) mode. This means that each accepted article is being published immediately online with DOI and article citation ID with starting page number 1. Articles are also visible in Web of Science immediately.

  13. Selecting a process paradigm for an emergent disruptive technology: Evidence from the emerging microsystems technology base

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.H. [Sandia National Labs., Albuquerque, NM (United States). Intelligent Micromachine Dept.; Walsh, S.T. [New Jersey Inst. of Tech., Newark, NJ (United States). School of Industrial Management

    1998-08-01

    Emergent technologies often suffer from a lack of an installed manufacturing base and an obvious dominant manufacturing technique. Firms which base their search for competitive advantage on emergent disruptive technologies must make hard production choices and endure major manufacturing discontinuities. The authors as well as many other firms, are now facing these challenges with the embrace of microsystems technologies. They add to the literature by providing a set of criteria for firms investing in emergent disruptive technologies. Sandia has long been associated as a pioneer in the development of new manufacturing techniques. Microsystems is just the current in a long line of manufacturing technologies that have been considered for mission critical system applications. The authors as well as others, have had to make the hard choice of investing in specific microsystems manufacturing techniques. Important considerations in the technique choice include: the existing internal manufacturing bases, commonality with existing commercial manufacturing infrastructure, current and projected critical performance characteristics, learning curves, the promise to add new but un-thought-of functionally to existing systems, and the anticipated ability to qualify devices built from the technique for mission critical applications.

  14. Decision Analysis Science Modeling for Application and Fielding Selection Applied to Concrete Decontamination Technologies

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Ross, T.L.

    1998-01-01

    Concrete surfaces contaminated with radionuclides present a significant challenge during the decontamination and decommissioning (D and D) process. As structures undergo D and D, coating layers and/or surface layers of the concrete containing the contaminants must be removed for disposal in such a way as to present little to no risk to human health or the environment. The selection of a concrete decontamination technology that is safe, efficient, and cost-effective is critical to the successful D and D of contaminated sites. To support U.S. Department of Energy (DOE) Environmental Management objectives and to assist DOE site managers in the selection of the best-suited concrete floor decontamination technology(s) for a given site, two innovative and three baseline technologies have been assessed under standard, non-nuclear conditions at the Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU). The innovative technologies assessed include the Pegasus Coating Removal System and Textron's Electro-Hydraulic Scabbling System. The three baseline technologies assessed include: the Wheelabrator Blastrac model 1-15D, the NELCO Porta Shot Blast trademark model GPx-1O-18 HO Rider, and the NELCO Porta Shot Blasttrademark model EC-7-2. These decontamination technology assessments provide directly comparable performance data that have previously been available for only a limited number of technologies under restrictive site-specific constraints. Some of the performance data collected during these technology assessments include: removal capability, production rate, removal gap, primary and secondary waste volumes, and operation and maintenance requirements. The performance data generated by this project is intended to assist DOE site managers in the selection of the safest, most efficient, and cost-effective decontamination technologies to accomplish their remediation objectives

  15. Exploring off-set pricing models and article deposit terms at King Abdullah University of Science & Technology (KAUST)

    KAUST Repository

    Buck, Stephen

    2018-04-09

    In the ‘normal’ world of retail and commerce you pay for an item and receive the item. In the world of academic journals you prepay for the item and you might receive the item and you might get some money back depending on what journals you did or didn’t receive. In the world of offset pricing you prepay, then you pay again, you sometimes use vouchers, you might get a discount (the following year) then you might get money back, or you might not. Are publishers knowingly placing barriers to off-set models, and not transparently offsetting the APCs to the subscription cost, in order to raise more income? Whether by design or accident it is a complex world which needs a time commitment, which not all librarians can give, to understand fully. The new model of scholarly communication, which leading universities (including KAUST) want to introduce, is based on shifting the subscription costs to publishing costs, not to double the payment channels to the publishers. Can we get to a mutually beneficial position where the author can deposit the accepted version of the article into the Institutional Repository without any embargo period as the institute is agreeing to pay the subscription fee on an ongoing basis? The required model does not adversely affect the vendors’ revenue. This presentation, based on KAUST’’s experience to date, will attempt to explain the different models of offset pricing while outlining KAUST’s dual approach, redirecting subscription money to publishing money and embedding open access terms in understandable language in our license agreements, to the problem. Why we have accepted IoP’s offset offer and not Springer’s, though we were considered among the first timers and important Institutions? Why is this important? Resolving the inherent complexities in offsetting models will save libraries money and also time wasted on tedious and unnecessary administration work. Researchers do not want to know about offsetting agreements nor

  16. Decision support for selecting exportable nuclear technology using the analytic hierarchy process. A Korean case

    International Nuclear Information System (INIS)

    Lee, Deok Joo; Hwang, Jooho

    2010-01-01

    The Korean government plans to increase strategically focused R and D investment in some promising nuclear technology areas to create export opportunities of technology in a global nuclear market. The purpose of this paper is to present a decision support process for selecting promising nuclear technology with the perspective of exportability by using the AHP based on extensive data gathered from nuclear experts in Korea. In this study, the decision criteria for evaluating the export competitiveness of nuclear technologies were determined, and a hierarchical structure for the decision-making process was systematically developed. Subsequently relative weights of decision criteria were derived using AHP methodology and the export competitiveness of nuclear technology alternatives was quantified to prioritize them. We discuss the implications of our results with a viewpoint toward national nuclear technology policy. (author)

  17. Survey of Mechanics (Selected Articles),

    Science.gov (United States)

    1983-04-11

    ith High Degree of Glass Beinforzement], Polimez-y, No. 11, 1978. 8. Zawistowki, H. and Frenkler, D. "Wybrane wlasnosci tworg~rw termo -plastycz... design ) is limited to thermosetting plastics epox-y, polyester resins) and does not allow one to utilize fine structural thermoplastics, for example

  18. Geodesy and Mapping (Selected Articles),

    Science.gov (United States)

    1979-08-16

    38.0 23.6 155 5.7 Gre* (- ) 3 19650309 393 23.8 38 5.7 Morz EFpjskie (5) 4 03 31 38.4 22.3 45 6.3 Grecia (’) 5 0409 35.1 24.3 39 5.9 Krgta () 6 0706...38.4 22.4 1 5.8 Grecjo C) 7 9660205 39.1 21.7 16 5.6 Grecia C) a 1029 38.9 21.1 1 5.8 Grecia (N) 9 196701209 39.9 20.3 1 S.6 AlbaniA C?) 10 0304 39.2...4) 1 9 0917 󈧪.4 20.3 33 5.6 Grecia (4’) 20 0913 38.0 22.4 75 5.8 Grecis ( 4j 11.04 38.9 20.5 13 5.6 Grecja e4) 22 11 29 35.2 23.1 37 5.6 Kreta C

  19. SUSTAINABILITY LOGISTICS BASING SCIENCE AND TECHNOLOGY OBJECTIVE DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT

    Science.gov (United States)

    2018-03-22

    64  3.4.2 Battalion  Waste ‐to‐ Energy  Converter (WEC...65  Figure 61: Battalion Waste -to- Energy Converter...Technology Corp  NSRDEC  Waste  Reduction  EE‐0940  Battalion  Waste ‐to‐ Energy  Converter  NSRDEC  Waste  Reduction  EE‐0980  Wastewater Treatment

  20. The manufacturing of TiAl6V4 implants using selective laser melting technology

    Science.gov (United States)

    Lykov, P. A.; Baitimerov, R. M.; Panfilov, A. V.; Guz, A. O.

    2017-10-01

    In this article we study the technique for creating medical implants using additive technologies. A plastic skull model was made. The affected part of the skull was identified and removed. An implant was made of titanium alloy. The implant was installed in the model skull.

  1. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    User

    Bacterial contamination of street vending food in Kumasi, Ghana. 1Department of Clinical Microbiology, School of Medical Sciences, Kwame Nkrumah University of Science and Technology, Kumasi,. Ghana; 2Department of Medical Laboratory Technology, Kwame Nkrumah University of Science and Technology, Kumasi, ...

  2. SUPPLIER SELECTION STRATEGY AND MANUFACTURING FLEXIBILITY: IMPACT OF QUALITY AND TECHNOLOGY ROADMAPS

    Directory of Open Access Journals (Sweden)

    Muhamad Jantan

    2006-01-01

    Full Text Available The study evaluates the relationship between technology, quality, cost and delivery performance-based, supplier selection strategies, and manufacturing flexibilities namely, product flexibility, launch flexibility, and volume flexibility. Moreover, the moderating impact of supplier management strategies, namely quality roadmap and technology roadmap on the above relationships were also explored. The data for the study was drawn from a sample of companies listed in the factory directory published by the Penang Development Corporation (PDC. A postal survey of 120 manufacturers provided a return of 92 usable responses. The results reveal that the selection of suppliers based on technological and quality performance positively affects all the three dimensions of manufacturing flexibility, with complementary effects of good technology and quality roadmaps. Technology and quality roadmaps act as predictors for product and volume flexibilities. However, when launch flexibility is the focus, both technology and quality roadmaps moderate the impact of supplier selection strategies. Details of the findings, theoretical and practical implications, and the research limitation are discussed.

  3. Decision Support Model for Selection Technologies in Processing of Palm Oil Industrial Liquid Waste

    Science.gov (United States)

    Ishak, Aulia; Ali, Amir Yazid bin

    2017-12-01

    The palm oil industry continues to grow from year to year. Processing of the palm oil industry into crude palm oil (CPO) and palm kernel oil (PKO). The ratio of the amount of oil produced by both products is 30% of the raw material. This means that 70% is palm oil waste. The amount of palm oil waste will increase in line with the development of the palm oil industry. The amount of waste generated by the palm oil industry if it is not handled properly and effectively will contribute significantly to environmental damage. Industrial activities ranging from raw materials to produce products will disrupt the lives of people around the factory. There are many alternative technologies available to process other industries, but problems that often occur are difficult to implement the most appropriate technology. The purpose of this research is to develop a database of waste processing technology, looking for qualitative and quantitative criteria to select technology and develop Decision Support System (DSS) that can help make decisions. The method used to achieve the objective of this research is to develop a questionnaire to identify waste processing technology and develop the questionnaire to find appropriate database technology. Methods of data analysis performed on the system by using Analytic Hierarchy Process (AHP) and to build the model by using the MySQL Software that can be used as a tool in the evaluation and selection of palm oil mill processing technology.

  4. Selected Legal Challenges Relating to the Military use of Outer Space, with Specific Reference to Article IV of the Outer Space Treaty

    Directory of Open Access Journals (Sweden)

    Anél Ferreira-Snyman

    2015-12-01

    Full Text Available Since the end of the Second World War the potential use of outer space for military purposes persisted to be intrinsically linked to the development of space technology and space flight. The launch of the first artificial satellite, Sputnik 1, by the USSR in 1957 made Western states realise that a surprise attack from space was a real possibility, resulting in the so-called "space-race" between the USA and the USSR. During the Cold War space activities were intrinsically linked to the political objectives, priorities and national security concerns of the USA and the Soviet Union. After the Cold War the political relevance and benefits of space continued to be recognised by states. In view of the recent emergence of new major space powers such as China, the focus has again shifted to the military use of outer space and the potential that a state with advanced space technology may use it for military purposes in order to dominate other states. Article IV of the Outer Space Treaty prohibits the installation of nuclear weapons and weapons of mass destruction in outer space and determines that the moon and other celestial bodies shall be used for peaceful purposes only. Due to the dual-use character of many space assets, the distinction between military and non-military uses of outer space is becoming increasingly blurred. This article discusses a number of legal challenges presented by article IV of the Outer Space Treaty, relating specifically to the term peaceful, the distinction between the terms militarisation and weaponisation and the nature of a space weapon. It is concluded that article IV is in many respects outdated and that it cannot address the current legal issues relating to the military use of outer space. The legal vacuum in this area may have grave consequences not only for maintaining peace and security in outer space, but also on earth. Consequently, an international dialogue on the military uses of outer space should be

  5. Selection of innovative technologies for the remediation of soils contaminated with radioactive and mixed wastes

    International Nuclear Information System (INIS)

    Steude, J.; Tucker, B.

    1991-01-01

    The remediation of sites containing radioactive and mixed wastes is in a period of rapid growth. The state of the art of remediation is progressing to handle the shortcomings of conventional pump and treat or disposal technologies. The objective of this paper is to review the status of selected innovative technologies which treat soils contaminated with radioactive and mixed waste. Technologies are generally classified as innovative if they are fully developed, but lack sufficient cost or performance data for comparison with conventional technologies. The Environmental Protection Agency recommends inclusion of innovative technologies in the RI/FS screening process if there is reason to believe that they would offer advantages in performance, implementability, cost, etc. This paper serves as a compilation of the pertinent information necessary to gain an overview of the selected innovative technologies to aid in the RI/F'S screening process. The innovative technologies selected for evaluation are listed below. Bioremediation, although innovative, was not included due to the combination of the vast amount of literature on this subject and the limited scope of this project. 1. Soil washing and flushing; 2. Low temperature thermal treatment; 3. Electrokinetics; 4. Infrared incineration; 5. Ultrasound; 6. In situ vitrification; 7. Soil vapor extraction; 8. Plasma torch slagging; 9. In situ hot air/steam extraction; 10. Cyclone reactor treatment; 11. In situ radio frequency; 12. Vegetative radionuclide uptake; and 13. In situ soil heating. The information provided on each technology includes a technical description, status, summary of results including types of contaminants and soils treated, technical effectiveness, feasibility and estimated cost

  6. Selected aspects of the technological processes of the aircraft engine washing

    Directory of Open Access Journals (Sweden)

    Rudawska Anna

    2017-01-01

    Full Text Available In production, treatment or operation of selected components it is not possible to avoid dirtiness. Given the fact that impurities significantly affect the quality, functionality and service life of a part, the surface preparation of such an element is a key aspect in the regeneration process. The choice of contaminant removal method will depend on the type of impurity. This operation is often treated as a separate technological process, during which the type and properties of the removed dirt are determined, along with assessing the degree of purity required to ensure the correctness of subsequent operation or operations. Rising expectations regarding specific effects of purification have led to massive improvement of traditional methods, and development of new processes that require the use of complex technologies. The present research was to prepare the technological process of washing selected parts of the aircraft turbine engine. The preliminary assumption was to use the LUA-1000 automatic washing processing line, which selecting and modifying particular parameters of the process in order to comply with the technological assumptions. The elaborated process includes the following stages: preparing the selected parts for washing, washing the engine parts and the quality control of washing. The primary objective of the study was to achieve the most beneficial parameters possible and, at the same time, to minimise the costs of the machine’s work, as well as to preserve high quality and to comply with environmental standards.

  7. A technology selection framework for supporting delivery of patient-oriented health interventions in developing countries.

    Science.gov (United States)

    Chan, Connie V; Kaufman, David R

    2010-04-01

    Health information technologies (HIT) have great potential to advance health care globally. In particular, HIT can provide innovative approaches and methodologies to overcome the range of access and resource barriers specific to developing countries. However, there is a paucity of models and empirical evidence informing the technology selection process in these settings. We propose a framework for selecting patient-oriented technologies in developing countries. The selection guidance process is structured by a set of filters that impose particular constraints and serve to narrow the space of possible decisions. The framework consists of three levels of factors: (1) situational factors, (2) the technology and its relationship with health interventions and with target patients, and (3) empirical evidence. We demonstrate the utility of the framework in the context of mobile phones for behavioral health interventions to reduce risk factors for cardiovascular disease. This framework can be applied to health interventions across health domains to explore how and whether available technologies can support delivery of the associated types of interventions and with the target populations. Published by Elsevier Inc.

  8. Research Article

    African Journals Online (AJOL)

    Department of Physics, Science and Research Branch, Islamic Azad University, Iran. Published online: 05 June 2016. ABSTRACT. YBCO specimens along with different amounts of ... should trigger a great technological revolution. To enable the emerging new technologies, the superconducting materials with a superior ...

  9. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    This paper looks at technology and health care in terms of processes (here defined as goal-related, autonomous and self- regulated arrangement of actions) and their interactions. Using this approach, technology is considered to be the quality of the processes we are trying to achieve. However, health care and the life ...

  10. Measuring process performance within healthcare logistics - a decision tool for selecting measuring technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Performance measurement can support the organization in improving the efficiency and effectiveness of logistical healthcare processes. Selecting the most suitable technologies is important to ensure data validity. A case study of the hospital cleaning process at a public Danish hospital was condu......Performance measurement can support the organization in improving the efficiency and effectiveness of logistical healthcare processes. Selecting the most suitable technologies is important to ensure data validity. A case study of the hospital cleaning process at a public Danish hospital...... was conducted. Monitoring tasks and ascertaining quality of work is difficult in such a process. Based on principal-agent theory, a set of decision indicator has been developed, and a decision framework for assessing technologies to enable performance measurement has been proposed....

  11. On the selection of financing instruments to push the development of new technologies: Application to clean energy technologies

    International Nuclear Information System (INIS)

    Olmos, Luis; Ruester, Sophia; Liong, Siok-Jen

    2012-01-01

    Achieving climate policy goals requires mobilizing public funds to bring still immature clean technologies to competitiveness and create new technological options. The format of direct public support must be tailored to the characteristics of technologies addressed. Based on the experience accumulated with innovation programs, we have identified those features of innovation that should directly condition the choice of direct support instruments. These include the funding gap between the cost of innovation activities and the amount of private funds leveraged; the ability of technologies targeted to compete for public funds in the market; the probability that these technologies fail to reach the market; and the type of entity best suited to conduct these activities. Clean innovation features are matched to those of direct support instruments to provide recommendations on the use to be made of each type of instrument. Given the large financing gap of most clean energy innovation projects, public grants and contracts should finance a large part of clean pre-deployment innovation. However, public loans, equity investments, prizes and tax credits or rebates can successfully support certain innovation processes at a lower public cost. Principles derived are applied to identify the instrument best suited to a case example. - Highlights: ► Public financing instruments must be tailored to the features of supported innovation. ► Instruments should trigger desired innovation at the lowest public cost possible. ► They should strike the right balance between technology selection and competition. ► Public funds mobilized through them should reach the innovating entity. ► Public loans, equity investments, prizes, and rebates should be used in specific cases.

  12. Comparative analyses for selected clean coal technologies in the international marketplace

    Energy Technology Data Exchange (ETDEWEB)

    Szpunar, C.B.; Gillette, J.L.

    1990-07-01

    Clean coal technologies (CCTs) are being demonstrated in research and development programs under public and private sponsorship. Many of these technologies could be marketed internationally. To explore the scope of these international opportunities and to match particular technologies with markets appearing to have high potential, a study was undertaken that focused on seven representative countries: Italy, Japan, Morocco, Turkey, Pakistan, the Peoples' Republic of China, and Poland. The results suggest that there are international markets for CCTs and that these technologies can be cost competitive with more conventional alternatives. The identified markets include construction of new plants and refurbishment of existing ones, especially when decision makers want to decrease dependence on imported oil. This report describes potential international market niches for U.S. CCTs and discusses the status and implications of ongoing CCT demonstration activities. Twelve technologies were selected as representative of technologies under development for use in new or refurbished industrial or electric utility applications. Included are the following: Two generic precombustion technologies: two-stage froth-flotation coal beneficiation and coal-water mixtures (CWMs); Four combustion technologies: slagging combustors, integrated-gasification combined-cycle (IGCC) systems, atmospheric fluidized-bed combustors (AFBCs), and pressurized fluidized-bed combustors (PFBCs); and Six postcombustion technologies: limestone-injection multistage burner (LIMB) systems, gas-reburning sorbent-injection (GRSI) systems, dual-alkali flue-gas desulfurization (FGD), spray-dryer FGD, the NOXSO process, and selective catalytic reduction (SCR) systems. Major chapters of this report have been processed separately for inclusion on the data base.

  13. Multi-criteria approach for selecting the best solid waste management technologies

    International Nuclear Information System (INIS)

    Latifah, A.M.; Hassan Basri; Noor Ezlin Ahmad Basri

    2010-01-01

    The growth in urbanization and industrial activities has caused solid waste management problems. As a solution the integrated approach has been chosen to manage the solid waste. Developing and implementing integrated solid waste management involve combined technologies and alternatives which are suitable with local laws condition. This research showed that Analytical Hierarchy Process (AHP) has the potential as a decision making tool that can be used in selecting process of solid waste management technology. Three levels hierarchy was developed with the goal at the top level, followed by criteria and alternatives. By using this technique, the priority of each considered technology will be determined where technology with the highest priority is more suitable to be developed. Sensitivity analysis was carried out to test the sensitivity of final decision towards inconsistency of judgement. Application of AHP to determine priority in selecting solid waste management technology was explained in this research based on a case study in the Port Dickson Municipal Council. Analysis of result showed that the combination of recycling technology and composting are suitable to be applied in the Port Dickson district. (author)

  14. Energy and Raw Materials in the Selection of Technologies for Iron and Steel

    Science.gov (United States)

    Fortini, Otavio Macedo

    2016-09-01

    This paper discusses the selection of metal extraction technologies according to the regional availability of energy resources. The most important energy sources in iron and steel production are determined from a review of current technologies to inform possible future scenarios of capacity replacement or expansion according to geography. Alternative technologies are not discussed, considering that actual investment in capacity is most often dominated by high degrees of risk aversion. As such, only technologies proven at a reasonable scale are included in the selection matrix. Scenarios of capacity choice are defined in terms of actions from external agents, those which are not directly involved in the industry but have the capacity to regulate actions by metal producing players. Two extreme scenarios corresponding to closed and open economies are used to set bounds for future expectations. Among steelmaking processes under fully open trade conditions, it is found that EAF steelmaking with charge pre-heat should be the technology of choice in all regions of the world except for South America and Europe, where Integrated Steel Mills have a cost advantage. In fully closed exchange scenarios, Integrated Steel Mills would be the prevalent technology in South America, Sub-Saharan Africa, India, and the former USSR, EAF with scrap pre-heating prevailing in all other regions. On the other hand, HYL-ZR would be the iron making technology of choice in all regions under full exchange scenarios. Under fully closed exchange conditions, Mini-Blast Furnaces, COREX, and HYL-ZR would find regional applications. Increases in raw materials and energy costs of 38 pct in steelmaking and 63 pct in ironmaking are found in going from fully open to fully closed exchange regimes. It is also found that Southeast Asia is the most suitable region for deploying new steelmaking capacity, while Australia and Russia are the best selection for new iron making capacity.

  15. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. PREVALENCE OF ANDROGENIC-. ANABOLIC STEROID USE IN. ADOLESCENTS IN TWO REGIONS. OF SOUTH AFRICA. Michael I lambert, Steven D Titlestad, Martin P Schwellnus. Objective. To determine the prevalence of androgenic- anabolic steroid (AAS) use among schoolchildren in two.

  16. SERIES ARTICLES

    Indian Academy of Sciences (India)

    ensis fruit. 4. SERIES ARTICLES. Evolution of the Atmosphere and Oceans: Evidence from Geological Records. Evolution of the Early Atmosphere. P V Sukumaran. 11 Electrostatics in Chemistry. Electrostatic Models for Weak Molecular ...

  17. SERIES ARTICLES

    Indian Academy of Sciences (India)

    IAS Admin

    347 Impact of Theoretical Chemistry on Chemical and. Biological Sciences. Chemistry Nobel Prize – 2013. Saraswathi Vishveshwara. SERIES ARTICLES. 368 Ecology: From Individuals to Collectives. A Physicist's Perspective on Ecology. Vishwesha Guttal. 310. 368 ...

  18. Use in selection of black currants of genofond of Kokino base station of All-Russian selection and Technological Institute of Horticulture and breeing Nursery

    OpenAIRE

    Sazonov, F.; Danshina, O.

    2013-01-01

    The genetic sources of the most valuable qualities for selective usage including good crop capacity, high stability against pathogenesis, winter stableness, big fruitfulness, the quality of fruit and other special directions of selection have been determined from the collection of black currants of the Kokino Base station of All-Russian Selection and Technological Institute of Horticulture and Breeding Nursery.

  19. Overview of selected surrogate technologies for high-temporal resolution suspended-sediment monitoring

    Science.gov (United States)

    Gray, John R.; Gartner, Jeffrey W.

    2010-01-01

    Traditional methods for characterizing selected properties of suspended sediments in rivers are being augmented and in some cases replaced by cost-effective surrogate instruments and methods that produce a temporally dense time series of quantifiably accurate data for use primarily in sediment-flux computations. Turbidity is the most common such surrogate technology, and the first to be sanctioned by the U.S. Geological Survey for use in producing data used in concert with water-discharge data to compute sediment concentrations and fluxes for storage in the National Water Information System. Other technologies, including laser-diffraction, digital photo-optic, acoustic-attenuation and backscatter, and pressure-difference techniques are being evaluated for producing reliable sediment concentration and, in some cases, particle-size distribution data. Each technology addresses a niche for sediment monitoring. Their performances range from compelling to disappointing. Some of these technologies have the potential to revolutionize fluvial-sediment data collection, analysis, and availability.

  20. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    Objective. To determine blood lead levels among children attending schools in selected Cape Peninsula suburbs, and to assess the impact of a reduction in the lead content of petrol. Design. A cross-sectional analytical study of children's blood lead levels and associated risk factors. Setting. Selected inner city, suburban, ...

  1. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    User

    Annonaceae), on lipopolysaccharide-induced fever in rats. Department of Pharmacognosy, 1Department of Pharmacology, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana. Fever is a complex physiological response triggered ...

  2. Research Article

    African Journals Online (AJOL)

    , Iran,. University of Science and technology. Published online: 05 June 2016. ABSTRACT. Unfortunately, with the development of cities and arrival of modernism, the past function of spaces like urban squares has changed and lost its real ...

  3. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    User

    Department of Molecular Medicine, School of Medical Sciences, College of Health Sciences, Kwame Nkrumah University of Science and. Technology, Kumasi, Ghana; 1Department of Medical Laboratory Science, School of Medicine and Health Sciences, University for Devel- opment Studies, Tamale, Ghana.

  4. Development of an indirect stereolithography technology for scaffold fabrication with a wide range of biomaterial selectivity.

    Science.gov (United States)

    Kang, Hyun-Wook; Cho, Dong-Woo

    2012-09-01

    Tissue engineering, which is the study of generating biological substitutes to restore or replace tissues or organs, has the potential to meet current needs for organ transplantation and medical interventions. Various approaches have been attempted to apply three-dimensional (3D) solid freeform fabrication technologies to tissue engineering for scaffold fabrication. Among these, the stereolithography (SL) technology not only has the highest resolution, but also offers quick fabrication. However, a lack of suitable biomaterials is a barrier to applying the SL technology to tissue engineering. In this study, an indirect SL method that combines the SL technology and a sacrificial molding process was developed to address this challenge. A sacrificial mold with an inverse porous shape was fabricated from an alkali-soluble photopolymer by the SL technology. A sacrificial molding process was then developed for scaffold construction using a variety of biomaterials. The results indicated a wide range of biomaterial selectivity and a high resolution. Achievable minimum pore and strut sizes were as large as 50 and 65 μm, respectively. This technology can also be used to fabricate three-dimensional organ shapes, and combined with traditional fabrication methods to construct a new type of scaffold with a dual-pore size. Cytotoxicity tests, as well as nuclear magnetic resonance and gel permeation chromatography analyses, showed that this technology has great potential for tissue engineering applications.

  5. Health-Care Waste Treatment Technology Selection Using the Interval 2-Tuple Induced TOPSIS Method.

    Science.gov (United States)

    Lu, Chao; You, Jian-Xin; Liu, Hu-Chen; Li, Ping

    2016-06-04

    Health-care waste (HCW) management is a major challenge for municipalities, particularly in the cities of developing nations. Selecting the best treatment technology for HCW can be regarded as a complex multi-criteria decision making (MCDM) issue involving a number of alternatives and multiple evaluation criteria. In addition, decision makers tend to express their personal assessments via multi-granularity linguistic term sets because of different backgrounds and knowledge, some of which may be imprecise, uncertain and incomplete. Therefore, the main objective of this study is to propose a new hybrid decision making approach combining interval 2-tuple induced distance operators with the technique for order preference by similarity to an ideal solution (TOPSIS) for tackling HCW treatment technology selection problems with linguistic information. The proposed interval 2-tuple induced TOPSIS (ITI-TOPSIS) can not only model the uncertainty and diversity of the assessment information given by decision makers, but also reflect the complex attitudinal characters of decision makers and provide much more complete information for the selection of the optimum disposal alternative. Finally, an empirical example in Shanghai, China is provided to illustrate the proposed decision making method, and results show that the ITI-TOPSIS proposed in this paper can solve the problem of HCW treatment technology selection effectively.

  6. Miniaturized, Planar Ion-selective Electrodes Fabricated by Means of Thick-film Technology

    Directory of Open Access Journals (Sweden)

    Robert Koncki

    2006-04-01

    Full Text Available Various planar technologies are employed for developing solid-state sensorshaving low cost, small size and high reproducibility; thin- and thick-film technologies aremost suitable for such productions. Screen-printing is especially suitable due to itssimplicity, low-cost, high reproducibility and efficiency in large-scale production. Thistechnology enables the deposition of a thick layer and allows precise pattern control.Moreover, this is a highly economic technology, saving large amounts of the used inks. Inthe course of repetitions of the film-deposition procedure there is no waste of material dueto additivity of this thick-film technology. Finally, the thick films can be easily and quicklydeposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodesbased on ionophores as well as crystalline ion-selective materials dedicated forpotentiometric measurements are demonstrated. Analytical parameters of these sensors arecomparable with those reported for conventional potentiometric electrodes. All mentionedthick-film strip electrodes have been totally fabricated in only one, fully automated thick-film technology, without any additional manual, chemical or electrochemical steps. In allcases simple, inexpensive, commercially available materials, i.e. flexible, plastic substratesand easily cured polymer-based pastes were used.

  7. Research Article Special Issue

    African Journals Online (AJOL)

    2016-05-15

    May 15, 2016 ... "The facts show that the use of new technologies in the 21st century will have a profound impact on human social life and education and education is certainly not exempt from these changes. Research in education, states the article that information technology has been mainly used in regular education ...

  8. Discovery of Potent and Selective Inhibitors for ADAMTS-4 through DNA-Encoded Library Technology (ELT).

    Science.gov (United States)

    Ding, Yun; O'Keefe, Heather; DeLorey, Jennifer L; Israel, David I; Messer, Jeffrey A; Chiu, Cynthia H; Skinner, Steven R; Matico, Rosalie E; Murray-Thompson, Monique F; Li, Fan; Clark, Matthew A; Cuozzo, John W; Arico-Muendel, Christopher; Morgan, Barry A

    2015-08-13

    The aggrecan degrading metalloprotease ADAMTS-4 has been identified as a novel therapeutic target for osteoarthritis. Here, we use DNA-encoded Library Technology (ELT) to identify novel ADAMTS-4 inhibitors from a DNA-encoded triazine library by affinity selection. Structure-activity relationship studies based on the selection information led to the identification of potent and highly selective inhibitors. For example, 4-(((4-(6,7-dimethoxy-3,4-dihydroisoquinolin-2(1H)-yl)-6-(((4-methylpiperazin-1-yl)methyl)amino)-1,3,5-triazin-2-yl)amino)methyl)-N-ethyl-N-(m-tolyl)benzamide has IC50 of 10 nM against ADAMTS-4, with >1000-fold selectivity over ADAMT-5, MMP-13, TACE, and ADAMTS-13. These inhibitors have no obvious zinc ligand functionality.

  9. Laminate article

    Science.gov (United States)

    Williams, Robert K.; Paranthaman, Mariappan; Chirayil, Thomas G.; Lee, Dominic F.; Goyal, Amit; Feenstra, Roeland

    2002-01-01

    A laminate article comprises a substrate and a biaxially textured (RE.sub.x A.sub.(1-x)).sub.2 O.sub.2-(x/2) buffer layer over the substrate, wherein 0article can include a layer of YBCO over the (RE.sub.x A.sub.(1-x)).sub.2 O.sub.2-(x/2) buffer layer. A layer of CeO.sub.2 between the YBCO layer and the (RE.sub.x A.sub.(1-x)).sub.2 O.sub.2-(x/2) buffer layer can also be include. Further included can be a layer of YSZ between the CeO.sub.2 layer and the (RE.sub.x A.sub.(1-x)).sub.2 O.sub.2-(x/2) buffer layer. The substrate can be a biaxially textured metal, such as nickel. A method of forming the laminate article is also disclosed.

  10. Measuring process performance within healthcare logistics - a decision tool for selecting track and trace technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Monitoring tasks and ascertaining quality of work is difficult in a logistical healthcare process due to cleaning personnel being dispersed throughout the hospital. Performance measurement can support the organization in improving the efficiency and effectiveness of processes and in ensuring...... quality of work. Data validity is essential for enabling performance measurement, and selecting the right technologies is important to achieve this. A case study of the hospital cleaning process was conducted at a public Danish hospital to develop a framework for assessing technologies in healthcare...

  11. Simulation technologies in networking and communications selecting the best tool for the test

    CERN Document Server

    Pathan, Al-Sakib Khan; Khan, Shafiullah

    2014-01-01

    Simulation is a widely used mechanism for validating the theoretical models of networking and communication systems. Although the claims made based on simulations are considered to be reliable, how reliable they really are is best determined with real-world implementation trials.Simulation Technologies in Networking and Communications: Selecting the Best Tool for the Test addresses the spectrum of issues regarding the different mechanisms related to simulation technologies in networking and communications fields. Focusing on the practice of simulation testing instead of the theory, it presents

  12. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    User

    HIV/AIDS) were not selected. ... 400 Precision, Memmert, Germany). Identification and Counting of Bacterial Iso- lates. Bacterial ..... policy implications for home management strate- gies. Acta Trop 90, 211-214. Musa-Aisien A., Ibadin M., Ukoh G.

  13. Review article

    DEFF Research Database (Denmark)

    Karsdal, Morten Asser; Krarup, H; Sand, J M B

    2014-01-01

    and to facilitate improved drug development. The aim of this article was to review the serological biomarkers that may assist in early diagnosis of patients, separate fast from slow- or nonprogressors, and possibly assist in drug development for fibroproliferative diseases, exemplified by liver fibrosis. The lack...... of success of biochemical markers and the possible reasons for this is discussed in the context of other fields with biomarker success. METHOD: This is a personal opinion review article. RESULTS: Biochemical markers, originating from the fibrotic structure, may have increased specificity and sensitivity...

  14. Assessing consumer benefits of selected gas appliance technology center tasks. Topical report, April-December 1992

    International Nuclear Information System (INIS)

    Smith, T.R.; Bournakis, A.D.; Worek, W.M.; Kalensky, D.C.; Dombrowski, L.P.

    1992-12-01

    The Gas Appliance Technology Center (GATC) was created in 1983 to assist the gas industry in bringing about a new generation of reasonably priced, advanced gas appliances. The objective of the report is to evaluate consumer benefits of sixteen selected GATC tasks for the time period between 1983 and 1990. Tasks were selected for review based upon their degree of industry impact and how well they represented activities in the four targeted research areas of Space Conditioning, Commercial Appliances, Residential Appliances, and Codes and Standards

  15. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. FIREARM-RELATED INJURIES AND. DEATHS AMONG CHILDREN AND. ADOLESCENTS IN CAPE TOWN -. 1992 -1996. Alyssa Wigton. Objective. To determ.i.lle the epidemiological profile of fireann- related injuries among children and adolescents in Cape. Town during recent years in order to ...

  16. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. References. 1. UNAIDS. Report on the Global HTV/AIDS Epidemic. Geneva: June 2000. 2. Connor E..\\1, Sperling RS, Gelber R. et al. Reduction of maternal-infant transmission of human immunodeficiency virus type 1 with zidovu dine treatment. N Eng! J Med 1994; 331:1173-1180. 3. Undegren ML ...

  17. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. PEAK RATES OF DIURESIS IN. HEALTHY HUMANS DURING ORAL. FLUID OVERLOAD. Timothy D Noakes, Gary Wilson, David A Gray,. Michael I Lambert, Steven C Dennis. Objective. To determine whether rates of intestinal fluid absorption and renal diuresis can match high rates of fluid ingestion ...

  18. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. CRITICAL CARE FOCUS. AETIOLOGY AND OUTCOME OF. SEVERE COMMUNITY-ACQUIRED. PNEUMONIA IN CHILDREN. ADMITTED TO A PAEDIATRIC. INTENSIVE CARE UNIT. S D Delport, T Brisley. Objective. To determine the aetiological agents and outcome of severe community-acquired ...

  19. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. UNPAID COMMUNITY. VOLUNTEERS - EFFECTIVE. PROVIDERS OF DIRECTLY. OBSERVED THERAPY (DOT) IN. RURAL SOUTH AFRICA. R D Barker, F J C Millard, M E Nthangeni. Objective. To il).ustrate successes and difficulties for the South. African National Tuberculosis Progranune in a ...

  20. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. Dual protection in sexually active women. Immo Kleinschmidt, Baker Ndugga Maggwa, Jennifer Smit,Mags E Beksinska, Helen Rees. Objective. To determine the prevalence and co-factors associated with the practice of dual protection against sexually transmitted infections (STis) and unwanted.

  1. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. EARLY DIAGNOSIS OF PROSTATE. CANCER IN THE WESTERN CAPE. C F Heyns, AM Naude, A J Visser, D C Marais,. H B Stopforth, J K Nyarko, G A Stellmacher. Background. Early stage prostate cancer does not cause symptoms, and even metastatic disease may exist for years without causing ...

  2. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. Nutritional variation and cardiovascular risk factors in. Tanzania - rural-urban difference. Marina Njelekela, Toshiaki Sato, Yasuo Nara, Tomohiro Miki, Sachiko Kuga, Takanori Noguchi, Torno Kanda, Masashi Yamori,. Josiah Ntogwisangu, Zablon Masesa, Yohana Mashalla, Jacob Mtabaji, Yukio ...

  3. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. Formative assessment promotes learning in undergraduate clinical clerkships. V C Burch, J L Seggie, N E Gary. Introduction. Clinical clerkships, typically situated in environments lacking educational structure, form the backbone of undergraduate medical training. The imperative to develop strategies ...

  4. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES c(~rvical spine injury outcome- a review of 101 cases treated in a tertiary referral unit. K Friielingsdorf, R N Dunn. Cervical spinal cord injury (SCI) is a devastating event for the patient and family. It has a huge impact on society because of the intensive resources required to manage the patient in both.

  5. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. OCCUPATIONAL EXPOSURE OF. INTERNS TO BLOOD IN AN AREA. OF HIGH HIV SEROPREVALENCE. A S Karstaedt, L Pantanowitz. Objective. To determine the epidemiology of work-related exposure to blood among interns. Design. Interns were invited to complete anonymously a questionnaire ...

  6. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. HISTORY OF MEDICINE. ELIM HOSPITAL - THE FIRST 100. YEARS. Part 2. C F van der Merwe. THE JAQUES ERA. The year 1957 saw the arrival of another giant in the history of. Elim Hospital. During this year Dr Pierre Jaques returned from postgraduate work in the UK. This son of the North was.

  7. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. References. 1. Raftery J. Mental health services in transition: the United States and the United Kingdom. Br. J Psychiatry 1992; 161: 589-593. 2. Sainsbury Centre for Mental Health. The Mental Health Services Workforce: Present and Future. A Report for the NHS Executive. London: The Sainsbury ...

  8. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. NUTRITIONAL STATUS AND. DENTAL CARIES IN A LARGE. SAMPLE OF 4- AND 5-YEAR-OLD. SOUTH AFRICAN CHILDREN. Peter Cleaton-Jones, Barbara D Richardson, Lars Granath,. L raul Fatti, Ruth SinweU, Alexander R Walker, Mirriam. Mogotsi. Background. Evidence from studies involving ...

  9. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. WHAT IS THE INFANT MORTALITY. RATE IN SOUTH AFRICA? THE NEED FOR IMPROVED DATA. Nadine Nannan, Debbie Bradshaw, Robert Mazur, Sim.phiwe. Maphumulo. Objectives. To review recent infant mortality and birth registration data in South Africa and to investigate geographical ...

  10. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    1997-06-17

    Jun 17, 1997 ... Steve Reid and Janet Giddy are two family physicians who worked from 1986 to 1995 at Bethesda Hospital in Ubombo,. Northern KwaZulu-Nata!. This article, which has been adapted from their submission to the Truth and Reconciliation. Commission (TRC) Health Sector Hearings on 17 June 1997,.

  11. Research Article

    African Journals Online (AJOL)

    2017-01-01

    Jan 1, 2017 ... the atomic level and to the experimental data. The purpose of this article is to fill this gap and to provide a more detailed and well-grounded substantial model of the photon. We will do it based on the theory of infinite nesting of matter and the substantial model of the electron [9]. We will start with considering ...

  12. Research Article

    African Journals Online (AJOL)

    2016-06-11

    Jun 11, 2016 ... n this article we try to explain the usage of tie-and-strut method a g this method in design of ... economical usage and ability to using them repeatedly (formwork system), the possibility of using the larger .... connecting regions have sufficient plastic deformation capacity, understanding of its behaviour will be ...

  13. Review Article

    African Journals Online (AJOL)

    Evert

    Vast hiatuses therefore exist in the South African historiography surrounding the First World. War and the role played by Union troops in it.4 This article reports on a review of the military archival holdings of the Documentation Centre in the light of these hiatuses. Deneys Reitz (1882–1944), third son of a former president of ...

  14. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    boaz

    ORIGINAL ARTICLE. AFRICAN JOURNAL OF CLINICAL AND EXPERIMENTAL MICROBIOLOGY MAY 2017 ISBN 1595-689X VOL18 No. 2 ... aquaculture in particular is of great concern to environmental and public health. In Nigeria, regulation ..... Occupational and Environmental Hygiene, 7 (2): 66-71. 29. Adebowale O.O ...

  15. Original Article

    African Journals Online (AJOL)

    Administratör

    Stroke in Palestine www.ljm.org.ly. Libyan J Med, AOP: 080920. Page 39. Original Article. Characterization of Hospitalized Ischemic Stroke Patients in. Palestine. Sawalha AF ... Key words: Ischemic stroke, Risk factors, In-hospital mortality, Palestine. ABSTRACT .... stroke in young patients seems to vary between different ...

  16. Research Article

    African Journals Online (AJOL)

    2016-06-25

    Jun 25, 2016 ... This article aims at evaluating the fun oftware which are employed for approximate solution in optimization been produced least squares by usual methods for linear and non enetic algorithm in this research. t Squares, Genetic Algorithm, Linear Model, Nonlinear Model, S dence, e-mail: c.author@mail.com.

  17. SERIES ARTICLES

    Indian Academy of Sciences (India)

    T Padmanabhan. GENERAL ARTICLES. 441 Bernoulli Runs Using 'Book Cricket' to Evaluate. Cricketers. Anand Ramalingam. 454 Wilhelm Ostwald, the Father of Physical Chemistry. Deepika Janakiraman. 468 How Many Equivalent Resistances? Sameen Ahmed Khan. 476 Multiplication: From Thales to Lie. P H Keskar.

  18. SERIES ARTICLES

    Indian Academy of Sciences (India)

    IAS Admin

    Tanya Kaushal Srivastava. 1086 Stochastic Approximation. Vivek S Borkar. 1095 False Discovery Rates and Multiple Testing. Soumen Dey and Mohan Delampady. SERIES ARTICLES. 1110 Challenges in the Quest for Clean Energies. Other Renewable Resources and Conclusion. Sheela K Ramasesha. 1095. 1110.

  19. SERIES ARTICLES

    Indian Academy of Sciences (India)

    304 Dawn of Science. The Copernican Revolution. T Padmanabhan. GENERAL ARTICLES. 310 Mach's Principle. J V Narlikar. 322 Robert Dicke and Atomic Physics. Vasant Natarajan. 333 Decoding Non-Coding DNA: Trash or Treasure? Namrata Iyer. 341 Weierstrass's Theorem – Leaving no 'Stone' Unturned. B Sury.

  20. SERIES ARTICLES

    Indian Academy of Sciences (India)

    This is the recent image of the microwave background and a 'shadow' (in bright colours) cast by a nearby galaxy cluster, as predicted in. 1969 by Zeldovich and his student Sunyaev. (refer to the article on p.428). Image courtesy: European Space Agency. Ya B Zeldovich. (1914–1987). ( Illustration: Subhankar Biswas ).

  1. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES failure, breath-holding spells and even strokeY The decreased attention span and learning associated with iron deficiency may have adverse effects on cognitive and psychomotor development.'-' Furthermore, appropriate treatment of iron deficiency is effective and safe, It would therefore seem worth.

  2. REVIEW ARTICLE

    African Journals Online (AJOL)

    User

    To conduct this review, we searched for relevant articles indexed in certain databases such as PubMed, Scopus, Islamic ... disorder characterized by disproportionate amount of urine excreted while asleep (Farhat et al., 2000). ... reported to be the causes of this disorder (Behrman. E.R, 2007). Nocturnal enuresis in children ...

  3. SERIES ARTICLES

    Indian Academy of Sciences (India)

    RESONANCE | June 2011. Resonance journal of science education. June 2011 Volume 16 Number 6. GENERAL ARTICLES. 504 D D Kosambi: The Scholar ... 551 Early Indian History and the Legacy of D D Kosambi. Romila Thapar. Source: http://www.arvindguptatoys. com/arvindgupta/ddknumis- matics.pdf. Punch Mark.

  4. Research Article

    African Journals Online (AJOL)

    2016-06-18

    Jun 18, 2016 ... Research Article. Journal of Fundamental and Applied Sciences is licensed under a Creative Commons Attribution-NonCommercial 4.0. International ... and breakthrough for human not only in some location and for some year rather for the ... they are used for the new source for building a new structure.

  5. SERIES ARTICLES

    Indian Academy of Sciences (India)

    From Euclid to Soccer if is ... A R Rao. Chemical Research of Sir Prafulla Chandra Ray. Sreebrata Goswami and Samaresh Bhattacharya. Acharya Prafulla Chandra at the College of Science. Gurunath Mukherjee. FEATURE ARTICLES. 54 Nature Watch. Engimatic Bamboos. C K John and Rajani 5 Nadgauda.

  6. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    remarkable history. The aim of this article is to share with the reader some of the events that led to the establishment of this institution and to recount the achievements of its staff through more than 100 years of history. ... The remarkable story of their arrival in .... longer seen as role models and they had to change their policy,.

  7. Research Article

    African Journals Online (AJOL)

    2016-06-13

    Jun 13, 2016 ... emerging drug-resistant pathogens in research programme around the world. This article reviews the .... classes are as follows: a) ß-Lactams (Penicillins, Cephalosporins, Monobactams and Carbapenems) .... Vancomycin Resistant Enterococci (VRE), Pseudomonas aeruginosa and Candida albicans, etc.

  8. REVIEW ARTICLE

    Indian Academy of Sciences (India)

    The article is aimed to review the impact of endogenous and exogenous factors on a mechanistic pathway of organophosphate pesticide biotransformation and various risk associated with it among the human population. Understanding the genetic polymorphism of genes involved in pesticide metabolism and highlighting ...

  9. Review Article

    African Journals Online (AJOL)

    2012-09-15

    Sep 15, 2012 ... Effects of Cheating on Accurate Assessment. Deepika Nelson, Julia Devardhi and Abdulaziz Dino. School of Foreign Language Studies, Main Campus, Post Box No: 53, Haramaya University, Ethiopia. Abstract. Article Information. In the view of Boud and Falchikov (2006) assessment has the clear purpose ...

  10. Download article

    African Journals Online (AJOL)

    user

    tions made in this article about outer texts in an electronic sign language dictionary serve as part of a complete concept model suggested specifically for the De la Bat School for the Deaf in Worcester,. South Africa (Fourie 2013). The purpose of the proposed dictionary is to give the learners of the De la Bat School electronic ...

  11. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    ORIGINAL ARTICLES. Paediatric immunity. The immaturity of the infant immune system is demonstrated by the increased susceptibility of children to infections by both viral and bacterial pathogens. The humoral arm of the immune system is underdeveloped and differs greatly from that of adults. Infants only develop the ...

  12. RESEARCH ARTICLE

    Indian Academy of Sciences (India)

    USER

    RESEARCH ARTICLE. Loss of smooth muscle myosin heavy chain results in the bladder and stomach developing lesion during mouse fetal development in mice. Running title. Bladder and stomach lesion without SM-MHC. MEIJUAN LI, SHILI LI, YU RAO, SHENG CUI, KEMIAN GOU*. State Key Laboratory of ...

  13. RESEARCH ARTICLE

    Indian Academy of Sciences (India)

    Navya

    RESEARCH ARTICLE. Expression analysis of Argonaute, Dicer-like and .... provided a foundation for future functional genomics studies of transcriptional silencing-associated gene families in ..... developmental and stress responses, antiviral immune responses and chromatin structure. These genes can affect the growth, ...

  14. Research Article

    African Journals Online (AJOL)

    SAMSUNG

    2016-06-05

    Jun 5, 2016 ... for civil engineers (in terms of gravity and lateral load) in developed countries. Despite the relatively significant growth of LSF structures during the last decade in our country, the studies in this field have been still done neither in our country nor in abroad. In this article, we try to study LSF structures from the ...

  15. Review Article

    African Journals Online (AJOL)

    2007-12-02

    Dec 2, 2007 ... Introduction. What prompted this review article is because of the wrong notion that the only standard abdominal incision is the midline incision. Cases have been seen in which an abdominal incision extends from the xyphoid process to the symphysis pubis just to remove a perforated appendix! The reason ...

  16. Original Article

    African Journals Online (AJOL)

    2010 May;3(2):25-9. Original Article. AJNT. Abstract. Introduction: Several reports described an association between type 2 diabetes mellitus (DM) and chronic hepatitis C virus (HCV) infection. Chronic HCV infection is prevalent in Egypt. The present work aimed to evaluate the prevalence of proteinuria and neuropathy.

  17. The regional electricity generation mix in Scotland: A portfolio selection approach incorporating marine technologies

    International Nuclear Information System (INIS)

    Allan, Grant; Eromenko, Igor; McGregor, Peter; Swales, Kim

    2011-01-01

    Standalone levelised cost assessments of electricity supply options miss an important contribution that renewable and non-fossil fuel technologies can make to the electricity portfolio: that of reducing the variability of electricity costs, and their potentially damaging impact upon economic activity. Portfolio theory applications to the electricity generation mix have shown that renewable technologies, their costs being largely uncorrelated with non-renewable technologies, can offer such benefits. We look at the existing Scottish generation mix and examine drivers of changes out to 2020. We assess recent scenarios for the Scottish generation mix in 2020 against mean-variance efficient portfolios of electricity-generating technologies. Each of the scenarios studied implies a portfolio cost of electricity that is between 22% and 38% higher than the portfolio cost of electricity in 2007. These scenarios prove to be mean-variance 'inefficient' in the sense that, for example, lower variance portfolios can be obtained without increasing portfolio costs, typically by expanding the share of renewables. As part of extensive sensitivity analysis, we find that Wave and Tidal technologies can contribute to lower risk electricity portfolios, while not increasing portfolio cost. - Research Highlights: → Portfolio analysis of scenarios for Scotland's electricity generating mix in 2020. → Reveals potential inefficiencies of selecting mixes based on levelised cost alone. → Portfolio risk-reducing contribution of Wave and Tidal technologies assessed.

  18. Review Article

    African Journals Online (AJOL)

    2012-06-24

    Jun 24, 2012 ... Science, Technology and Arts Research Journal. April-June 2012, 1(2):59-64 www.starjournal.org. Copyright©2012 STAR. All Rights Reserved. Amalgamation of Personal Software Process in Software ... The philosophy behind the PSP is that an organization's ability to build large-scale software systems ...

  19. Article 5

    African Journals Online (AJOL)

    in the country. This paper explores some of the key factors influencing TTP in. BOT projects through extensive literature review, survey with clients, developers, and lenders. The aim is to contribute to the understanding and development of technology transfer through BOT projects development. Questionnaire was used to ...

  20. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    User

    ment of Clinical Microbiology, 3Department of Molecular Medicine, School of Medical Sciences, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana; 4Septic Ward, Department of Surgery, Tamale Teaching Hospital, Tamale, Ghana. In sub-Sahara African countries, both malaria and intestinal helminth ...

  1. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    User

    Department of Pharmacognosy, Faculty of Pharmacy & Pharmaceutical Sciences, College of Health Sciences, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana. Secamone afzelii is used traditionally in Ghana mainly as a wound healing agent. This study re- ports the anti-inflammatory and antioxidant ...

  2. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    1996-11-15

    Nov 15, 1996 ... Culture, Science and Technology's Innovation Fund for Crime. Prevention. .... areas were accommodated in a number of hotels for the night preceding the ... 0.53. < 1~. Table V. Multivariate analysis of association between foods consumed and case definition A (acute nausea or vomiting) and B (diarrhoea).

  3. Research Article

    African Journals Online (AJOL)

    2017-01-01

    Jan 1, 2017 ... nduction machines (IM) is large importance and are being widely u l system device regarding for their robustness, reliability, and simple ped technologies. This work presents a reliable method for diagnos broken bars faults in induction machine. The detection faults are ba current signal. Also the calculation ...

  4. Research Article

    African Journals Online (AJOL)

    2016-06-18

    Jun 18, 2016 ... ABSTRACT. Supercritical fluid (SCF) technology has become an important tool of materials processing in the last two decades. Supercritical CO2 and H2O are extensively being used in the preparation of a great variety of nanomaterials. The interest in the preparation and application of nanometer size ...

  5. ORIGINAL ARTICLES

    African Journals Online (AJOL)

    2007-08-05

    Aug 5, 2007 ... Rosana Norman, Eugene Cairncross, Jongikhaya Witi, Debbie Bradshaw and the South African Comparative Risk Assessment. Collaborating ... Department of Chemical Engineering, Cape Peninsula University of Technology. Eugene ... A legacy of apartheid-era town planning was the location of industry ...

  6. SERIES ARTICLES

    Indian Academy of Sciences (India)

    41 The Secret Sex Lives of Rotifers. Sex, Asex and Cannibalism. T Ramakrishna Rao. 48 Ludwig Prandtl and Boundary Layers in Fluid Flow. How a Small Viscosity can Cause Large Effects. Jaywant H Arakeri and P N Shankar. 64 Techniques of Wastewater Treatment. Future Technologies. Amol A Kulkarni, Mugdha ...

  7. Review Article

    African Journals Online (AJOL)

    telecommunications networks capable of interactive high-speed data transfers may emerge in the near future. Although broadband technologies are being widely adopted by consumers, and heavily promoted by governments, it is observed that their impacts to date are subtle, rather than spectacular. The paper focuses on ...

  8. Article 6

    African Journals Online (AJOL)

    despite continual improvement in technology and education. (Ashworth ... capability reviews, and process improvement projects. ... services. 2,998,700. 5. 103,500. Design/personnel Design=3. Personnel=2. 7. Mechanical services. 5,097,840. 7. 99,450. Design/personnel Design=6. Personnel=1. 8. Roof. 18,042,350. 2.

  9. Review Article

    African Journals Online (AJOL)

    2012-12-29

    Dec 29, 2012 ... which uses single grain silicon crystals to fabricate Single Grain Thin Film. Transistors (SG-TFTs) at plastic compatible temperatures. SG-TFTs and other similar technologies can potentially enable fabricating electronics directly on arbitrary substrates. This would further enable integration of embedded.

  10. Research Article

    African Journals Online (AJOL)

    2016-06-11

    Jun 11, 2016 ... Department of Food Science and Technology, Sabzevar Branch, Islamic Azad University, Sabzevar,Iran. 3. Faculty of Basic Sciences, Ferdowsi University of .... on the magnetic stirrer at a speed of 250 revolutions per minute for 24 hours at ambient temperature and then was smoothed by No.1 Whatman ...

  11. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    a smartphone and approximately 38% of physicians have admitted to using medically-related Apps on a daily basis.1,6,7 ... Background: Mobile phone applications (Apps) have become a vital assistant to medical personnel in today's technologically advanced era. The utility of Apps with case logbook capabilities has not ...

  12. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    User

    13. Prevalence and determinants of proteinuria among type 2 diabetics in Kumasi, Ghana. 1Department of Clinical Microbiology, 3Department of Molecular Medicine, 4Department of Medicine, School of Medical Sciences, College of Health Sciences, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana; ...

  13. ARTICLES / SAGGI

    African Journals Online (AJOL)

    User

    evaluating the impact on Italian literary traditions of a new generation of young writers. Since their debut in the ... stereotype, the hero of a TV serial which endlessly reproduces in various permutations the vicissitudes of his ... and the world endlessly promised by digital technology which has become our collective memory.

  14. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    dell

    Besides, 70.6%(417) suggested that the presentation was not supported by the technological facility that could be used by the TV like animation, colorful, glittering etc. Besides, 32% (189) could not see the written material on the screen from every corner of the class (Table-3). Quality of TV presenting mathematical formulas ...

  15. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    User

    Sciences, Kwame Nkrumah University of Science and Technology, Kumasi, 2 Laboratory Department, malaria Research Centre, Agogo. Presbyterian Hospital, Asante Akim, 3School of Veterinary Medicine, University of Ghana, Accra, 4Department of Biomedical Laborato- ry Science, School of Allied Health Sciences, ...

  16. Article 3

    African Journals Online (AJOL)

    lower than most biomass fuels. (Bharadwaj et al., 2004) presents peculiar difficulties to ash by thermal process. ... The fuel is fed from apertures located some distance above the bed. The mixing caused by fluidization ... indicate that country of origin, incineration technology and conditions of rice husk effect composition of ...

  17. Article 7

    African Journals Online (AJOL)

    sustainability; and that hoteliers need to ensure that the qualities of these hotel attributes are maintained at an acceptable level by constantly reviewing customers' feedback. Keywords: Hedonic pricing, Hotels, Lagos Island, Pricing, Users demand. ATBU Journal of Environmental Technology 6, 1, December 2013. 77 ...

  18. SERIES ARTICLES

    Indian Academy of Sciences (India)

    64 Techniques of Wastewater Treatment. Future Technologies. Amol A Kulkarni, Mugdha Deshpande and A B Pandit. BOOK REVIEWS. 76 Linear Algebra and Linear Models. Kalyan Das. REFLECTIONS. 77 Science and the Human Condition. N Mukunda. Front Cover. Back Cover. A computer generated drawing of the ...

  19. Evaluation and Selection of Renewable Energy Technologies for Highway Maintenance Facilities

    Science.gov (United States)

    Andrews, Taylor

    The interest in renewable energy has been increasing in recent years as attempts to reduce energy costs as well the consumption of fossil fuels are becoming more common. Companies and organizations are recognizing the increasing reliance on limited fossil fuels' resources, and as competition and costs for these resources grow, alternative solutions are becoming more appealing. Many federally run buildings and associations also have the added pressure of meeting the mandates of federal energy policies that dictate specific savings or reductions. Federal highway maintenance facilities run by the Department of Transportation fall into this category. To help meet energy saving goals, an investigation into potential renewable energy technologies was completed for the Ohio Department of Transportation. This research examined several types of renewable energy technologies and the major factors that affect their performance and evaluated their potential for implementation at highway maintenance facilities. Facilities energy usage data were provided, and a facility survey and site visits were completed to enhance the evaluation of technologies and the suitability for specific projects. Findings and technology recommendations were presented in the form of selection matrices, which were designed to help make selections in future projects. The benefits of utilization of other tools such as analysis software and life cycle assessments were also highlighted. These selection tools were designed to be helpful guides when beginning the pursuit of a renewable energy technology for highway maintenance facilities, and can be applied to other similar building types and projects. This document further discusses the research strategies and findings as well as the recommendations that were made to the personnel overseeing Ohio's highway maintenance facilities.

  20. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-11-10

    Nov 10, 2017 ... There are numerous articles composed by researchers on the selection of a model from a repository of models in machine learning techniques. The majority of the articles have distinctive experimental strategies and a diverse range of study from others. The main measures utilized for accuracy evaluation, ...

  1. Geoengineering Responses to Climate Change Selected Entries from the Encyclopedia of Sustainability Science and Technology

    CERN Document Server

    Vaughan, Naomi

    2013-01-01

    Failure by the international community to make substantive progress in reducing CO2 emissions, coupled with recent evidence of accelerating climate change, has brought increasing urgency to the search for additional remediation approaches.  This book presents a selection of state-of-the-art geoengineering methods for deliberately reducing the effects of anthropogenic climate change, either by actively removing greenhouse gases from the atmosphere or by decreasing the amount of sunlight absorbed at the Earth’s surface.  These methods contrast with more conventional mitigation approaches which focus on reducing emissions of greenhouse gases, especially carbon dioxide. Geoengineering technologies could become a key tool to be used in conjunction with emissions reduction to limit the magnitude of climate change.  Featuring authoritative, peer-reviewed entries from the Encyclopedia of Sustainability Science and Technology, this book presents a wide range of climate change remediation technologies. Examines th...

  2. Lactic Acid Bacteria Selection for Biopreservation as a Part of Hurdle Technology Approach Applied on Seafood

    Directory of Open Access Journals (Sweden)

    Norman Wiernasz

    2017-05-01

    Full Text Available As fragile food commodities, microbial, and organoleptic qualities of fishery and seafood can quickly deteriorate. In this context, microbial quality and security improvement during the whole food processing chain (from catch to plate, using hurdle technology, a combination of mild preserving technologies such as biopreservation, modified atmosphere packaging, and superchilling, are of great interest. As natural flora and antimicrobial metabolites producers, lactic acid bacteria (LAB are commonly studied for food biopreservation. Thirty-five LAB known to possess interesting antimicrobial activity were selected for their potential application as bioprotective agents as a part of hurdle technology applied to fishery products. The selection approach was based on seven criteria including antimicrobial activity, alteration potential, tolerance to chitosan coating, and superchilling process, cross inhibition, biogenic amines production (histamine, tyramine, and antibiotics resistance. Antimicrobial activity was assessed against six common spoiling bacteria in fishery products (Shewanella baltica, Photobacterium phosphoreum, Brochothrix thermosphacta, Lactobacillus sakei, Hafnia alvei, Serratia proteamaculans and one pathogenic bacterium (Listeria monocytogenes in co-culture inhibitory assays miniaturized in 96-well microtiter plates. Antimicrobial activity and spoilage evaluation, both performed in cod and salmon juice, highlighted the existence of sensory signatures and inhibition profiles, which seem to be species related. Finally, six LAB with no unusual antibiotics resistance profile nor histamine production ability were selected as bioprotective agents for further in situ inhibitory assays in cod and salmon based products, alone or in combination with other hurdles (chitosan, modified atmosphere packing, and superchilling.

  3. Technology Evaluation and Selection of 3DIC Integration Using a Three-Stage Fuzzy MCDM

    Directory of Open Access Journals (Sweden)

    Yen-Chun Lee

    2016-01-01

    Full Text Available For the purpose of the sustainable development in the global semiconductor industry, emerging three-dimensional integrated circuit (3DIC integration technologies have demonstrated their importance as potential candidates for extending the lifespan of Moore’s Law. This study aimed to explore a technology selection process involving a three-stage fuzzy multicriteria decision-making (MCDM approach to facilitate the effective assessment of emerging 3DIC integration technologies. The fuzzy Delphi method was first used to determine the important criteria. The fuzzy analytic hierarchy process (fuzzy AHP was then adopted to derive the weights of the criteria. The fuzzy technique for order of preference by similarity to ideal solution (fuzzy TOPSIS was finally deployed to rate the alternatives. Empirical results indicate that market potential, time-to-market, and heterogeneous integration are the top three decision criteria for the selection of 3DIC integration technologies. Furthermore, 2.5D through-silicon interposer (TSI is of primary interest to the Taiwanese semiconductor industry, followed by 3DIC through-silicon via (TSV, 3D packaging, and 3D silicon TSV (Si TSV. The proposed three-stage fuzzy decision model may potentially assist industry practitioners and government policy-makers in directing research and development investments and allocating resources more strategically.

  4. Current status of selected oral peptide technologies in advanced preclinical development and in clinical trials.

    Science.gov (United States)

    Aguirre, T A S; Teijeiro-Osorio, D; Rosa, M; Coulter, I S; Alonso, M J; Brayden, D J

    2016-11-15

    The development of oral dosage forms that allows absorption of therapeutic peptides to the systemic circulation is one of the greatest challenges for the pharmaceutical industry. Currently, a number of technologies including either mixtures of penetration enhancers or protease inhibitors and/or nanotechnology-based products are under clinical development. Typically, these formulations are presented in the form of enteric-coated tablets or capsules. Systems undergoing preclinical investigation include further advances in nanotechnology, including intestinal microneedle patches, as well as their combination with regional delivery to the colon. This review critically examines four selected promising oral peptide technologies at preclinical stage and the twelve that have progressed to clinical trials, as indicated in www.clinicaltrials.gov. We examined these technologies under the criteria of peptide selection, formulation design, system components and excipients, intestinal mechanism of action, efficacy in man, and safety issues. The conclusion is that most of the technologies in clinical trials are incremental rather than paradigm-shifting and that even the more clinically advanced oral peptide drugs examples of oral bioavailability appear to yield oral bioavailability values of only 1-2% and are, therefore, only currently suitable for a limited range of peptides. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Comparison of curricula in radiation technology in the field of radiotherapy in selected European Union countries.

    Science.gov (United States)

    Janaszczyk, Agnieszka; Bogusz-Czerniewicz, Marta

    2011-01-01

    Radiation technology is a discipline of medical science which deals with diagnostics, imaging and radiotherapy, that is treatment by ionizing radiation. To present and compare the existing curricula of radiation technology in selected EU countries. The research work done for the purpose of the comparative analysis was based on the methods of diagnostic test and document analysis. The comparison of curricula in selected countries, namely Austria, France, the Netherlands and Poland, showed that admission criteria to radiation technology courses are varied and depend on regulations of respective Ministries of Health. The most restrictive conditions, including written tests in biology, chemistry and physics, and psychometric test, are those in France. Contents of basic and specialist subject groups are very similar in all the countries. The difference is in the number of ECT points assigned to particular subjects and the number of course hours offered. The longest practical training is provided in the Netherlands and the shortest one in Poland. The duration of studies in the Netherlands is 4 years, while in Poland it is 3 years. Austria is the only country to offer extra practical training in quality management. Graduates in the compared EU countries have similar level of qualifications in the fields of operation of radiological equipment, radiotherapy, nuclear medicine, foreign language and specialist terminology in the field of medical and physical sciences, general knowledge of medical and physical sciences, and detailed knowledge of radiation technology.

  6. Optimal Selection Method of Process Patents for Technology Transfer Using Fuzzy Linguistic Computing

    Directory of Open Access Journals (Sweden)

    Gangfeng Wang

    2014-01-01

    Full Text Available Under the open innovation paradigm, technology transfer of process patents is one of the most important mechanisms for manufacturing companies to implement process innovation and enhance the competitive edge. To achieve promising technology transfers, we need to evaluate the feasibility of process patents and optimally select the most appropriate patent according to the actual manufacturing situation. Hence, this paper proposes an optimal selection method of process patents using multiple criteria decision-making and 2-tuple fuzzy linguistic computing to avoid information loss during the processes of evaluation integration. An evaluation index system for technology transfer feasibility of process patents is designed initially. Then, fuzzy linguistic computing approach is applied to aggregate the evaluations of criteria weights for each criterion and corresponding subcriteria. Furthermore, performance ratings for subcriteria and fuzzy aggregated ratings of criteria are calculated. Thus, we obtain the overall technology transfer feasibility of patent alternatives. Finally, a case study of aeroengine turbine manufacturing is presented to demonstrate the applicability of the proposed method.

  7. Protective articles

    International Nuclear Information System (INIS)

    Wardley, R.B.

    1983-01-01

    This patent specification describes an article affording protection against radiation, and especially against X-rays comprising at least one flexible layer of lead filled material in an envelope of, or sandwiched between two layers of a knitted, woven or non-woven fabric preferably of synthetic fibrous material, carrying on its outer surface a coating of flexible polyurethane. The outer fabric provides a resilient, extremely tough and cut resistant covering for the relatively soft lead filled material. (author)

  8. Experimental Comparison of the Tribological Properties of Selected Surfaces Created by Thermal Spraying Technology

    Directory of Open Access Journals (Sweden)

    František Tóth

    2016-01-01

    Full Text Available The scientific article titled “Experimental comparison of the tribological properties of selected surfaces created by thermal spraying technology” deals with the surface condition of selected pairs working within the mixed friction before and after experimental tests. Based on the chosen methodology, the experimental tests were performed on the Tribotestor M’06 testing machine. The ecological oil MOGUL HEES 46 (manufactured by Paramo was used as a lubricant. The tests were performed on selected material pairs. The first friction element was a shaft of steel 14 220. The second friction element was a steel plate of steel 11 373 with a friction surface created by two materials, i.e. CuSn10 and NP 40. The results are statistically elaborated and illustrated in figures and tables.

  9. Research Article

    African Journals Online (AJOL)

    2017-01-01

    Jan 1, 2017 ... minimize a cost function defined as the quadratic sum of the differences between the capacitors voltages and their reference values [29]. Thanks to an appropriate selection of the redundant vectors this function can be minimized to zero and the capacitors voltages will be kept at their reference values [29].

  10. Review article

    DEFF Research Database (Denmark)

    Perner, A; Rask-Madsen, J

    1999-01-01

    of experi mental colitis in 'knock-out' mice deficient in iNOS. Selective inhibitors of iNOS activity, as well as topical L-arginine, may therefore prove beneficial in inflammatory bowel disease by reducing the production of superoxide by iNOS, while only the former option may be expected to reduce...

  11. Original Article

    African Journals Online (AJOL)

    Sarra

    Methods: This is a retrospective study of 300 CKD patients in stages 2Y4, that were randomly selected from patients who were on regular follow up in Sheffield. Kidney Institute (SKI), Sheffield, UK, up to June 2007. Patients whose estimated glomerular filtration rate (GFR) declined by more than 1 ml/min/year according to the.

  12. Research Article

    African Journals Online (AJOL)

    2016-06-17

    Jun 17, 2016 ... Undoubtedly, doctors must select the appropriate imaging method by taking all this into account (Wieners & Detert,. 2007). Due to the fact that the scientific community has paid a particular attention to explore new ways to reduce the imaging time and increase the quality of magnetic resonance imaging in.

  13. Research Article

    African Journals Online (AJOL)

    2017-05-01

    May 1, 2017 ... selection of the model depends on the watershed and the objective of the hydrological forecast in the watershed. ..... establish the IDF curves based on extreme value, in order to evaluate the watershed reaction ..... [28] USGS, Estimating Basin Lagtime and Hydrograph-Timing Indexes Used to Characterize.

  14. Research Article

    African Journals Online (AJOL)

    2016-06-18

    Jun 18, 2016 ... recognition works, multilayer neural network has been used for events classification. The. STFT and Discrete Wavelet Transform are used for feature extraction. Acquired features of this step are decreased using advance algorithm of feature selection. Then these extracted features were given to the neural ...

  15. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    number of MTB strain is less than 39,062,500 and. 4,444,444,444 with selective effect to INH and RIF ..... random generated cycles was used as the empirical data to further assess the simulated results of the ... Basically, the process is a form of pseudo sampling from the original dataset to determine the variability.

  16. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    1Department of Molecular Medicine, School of Medical Science, 2Department of Medical Laboratory Technology, Faculty of Allied Health. Sciences ..... Fast food intake everyday. 11 (30.6). 62 (29.4). 19 (39.6). 2 (40.0). 0.5542. Once a week. 17 (47.2). 90 (42.7). 17 (35.4). 1 (20.0). 0.5166 once a month. 6 (16.7). 44 (20.9).

  17. Potential of organic Rankine cycle technology in India: Working fluid selection and feasibility study

    International Nuclear Information System (INIS)

    Sarkar, Jahar; Bhattacharyya, Souvik

    2015-01-01

    India has great potential to employ the ORC (organic Rankine cycle) technology for conversion of low temperature waste heat and renewable energy. In this study, available waste heat and relevant renewable heat sources in India are reviewed and suitable working fluids for ORC have been selected based on operational, environmental and safety criteria. A feasibility study and comparison of selected fluids for ORC is also presented for Indian climates along with discussions on component, operation and cost related aspects. A comprehensive review on available heat sources and sinks shows that India has plenty of waste heat and renewable energy sources for electricity generation by means of ORC; however, condenser operation may be challenging due to wide ambient temperature variation. Appropriate performance comparison among selected working fluids shows that ammonia is the best fluid in terms of net power generation and compactness of turbo-machineries, whereas n-Pentane is the best fluid in terms of thermal efficiency and heat exchanger compactness. Both are recommended as working fluids for ORC installations in India. The study reveals that there is a great opportunity to employ this technology in India provided we have to overcome some challenges related to component selection, finance and maintenance. - Highlights: • Available waste heat and renewable heat energies, and sinks in India are reviewed. • Suitable working fluids are selected by operational, environmental and safety criteria. • A feasibility study and comparison of selected fluids are presented for Indian climates. • Ammonia and n-Pentane are recommended for ORC installation in India. • Challenges related to plant component, operation and cost are discussed.

  18. DECISION ANALYSIS SCIENCE MODELING FOR APPLICATION AND FIELDING SELECTION APPLIED TO EQUIPMENT DISMANTLEMENT TECHNOLOGIES

    International Nuclear Information System (INIS)

    Ebadian, M.A.

    1999-01-01

    The dismantlement of radioactively contaminated process equipment is a major concern during the D and D process. There are an estimated 1,200 buildings in the DOE-EM complex that will require the dismantlement of equipment and various metal structures. As buildings undergo the D and D process, this metallic equipment contaminated with radionuclides such as uranium and plutonium must be size-reduced before final disposal. A single information source comparing dismantlement technologies in the areas of safety, cost, and performance is needed by DOE managers and is not currently available. The selection of the appropriate technologies to meet the dismantlement objectives for a given site is a difficult process in the absence of comprehensive and comparable data. Choosing the wrong technology could result in increased exposure of personnel to contaminants and an increase in D and D project costs. The purpose of this investigation was to evaluate commercially available and innovative technologies for equipment dismantlement and provide a comprehensive source of information to the D and D community in the areas of technology performance, cost, and health and safety

  19. Decision Analysis Science Modeling for Application and Fielding Selection Applied to Equipment Dismantlement Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Ebadian, M.A.; Lagos, L.E.

    1998-01-01

    The dismantlement of radioactively contaminated process equipment is a major concern during the D and D process. As buildings undergo the D and D process, metallic equipment contaminated with radionuclides such as uranium and plutonium must be dismantled before final disposal.The primary objective for equipment dismantlement is to reduce the potential for personnel and environmental exposure to contaminants during the decommissioning of the nuclear facility. The selection of the appropriate technologies to meet the dismantlement objectives for a given site is a difficult process in the absence of comprehensive and comparable data. Choosing the wrong technology could result in increased exposure of personnel to contaminants and an increase in D and D project costs. Innovative technologies are being developed with the goal of providing safer and more cost-effective alternatives that generate less secondary waste, thereby decreasing the operating costs for dismantlement. During the development and implementation process, performance indicators for the success of these technologies must be reviewed to ensure that these aims are being met. This project provides a mechanism for the assessment of innovative and commercially available nuclear and non-nuclear technologies for equipment dismantlement.

  20. DECISION ANALYSIS SCIENCE MODELING FOR APPLICATION AND FIELDING SELECTION APPLIED TO EQUIPMENT DISMANTLEMENT TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian, Ph.D.

    1999-01-01

    The dismantlement of radioactively contaminated process equipment is a major concern during the D&D process. There are an estimated 1,200 buildings in the DOE-EM complex that will require the dismantlement of equipment and various metal structures. As buildings undergo the D&D process, this metallic equipment contaminated with radionuclides such as uranium and plutonium must be size-reduced before final disposal. A single information source comparing dismantlement technologies in the areas of safety, cost, and performance is needed by DOE managers and is not currently available. The selection of the appropriate technologies to meet the dismantlement objectives for a given site is a difficult process in the absence of comprehensive and comparable data. Choosing the wrong technology could result in increased exposure of personnel to contaminants and an increase in D&D project costs. The purpose of this investigation was to evaluate commercially available and innovative technologies for equipment dismantlement and provide a comprehensive source of information to the D&D community in the areas of technology performance, cost, and health and safety.

  1. ORIGINAL ARTICLE

    African Journals Online (AJOL)

    poor tuberculosis treatment outcomes ... expression levels of six select efflux pumps associated with drug tolerance in Mycobacterium tuberculosis and its ..... 1mg/L EtBr + Buffer (Control). Treatment failures (non-MDR). Treatment successes. 0. 10. 20. 30. 40. 0.6. 0.7. 0.8. 0.9. 1.0. Time / minutes. R e la ti v e. F lu o re s c e n.

  2. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-10-05

    Oct 5, 2017 ... hidden neurons and input delays were selected based on optimization of NARX training and validation ... A quantitative observation for hidden neuron number selection based on number of delay 1 using NARX .... assessment. International Journal of Food Science and Technology, 2017, 52(1):214-221.

  3. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-11-24

    Nov 24, 2017 ... affect the quality of the developed control system of the unit as a whole, allowing to improve the quality of the ball ... technological process and to select such management actions, which will ensure better value .... input channels with the greatest impact on the output parameter of the object were selected.

  4. Technology of repair of selected equipment in the power plant type VVER 440

    Energy Technology Data Exchange (ETDEWEB)

    Barborka, J.; Magula, V. [Welding Research Inst. (WRI), Bratislava (Slovakia)

    1998-11-01

    This article is divided in two parts: The first part is studying the effect of individual parameters by the usual and pulsed welding of 15CH2MFA steel. It can be concluded that by use of mechanized or automatic TIG process in PC position with addition of a cold wire with high nickel content the desired quality of repair welded joints of a pressure vessel of VVER 440 reactor can be achieved. Based on the results of the second laboratory study of the renovation technology applied for the rotary surfaces of pressure-tight cover and spindle of the main closing armature type DN 500 it can be concluded, that the developed technology for surfacing the sealing surfaces by TIG process with addition of a high-nickel cold wire the functional capability of the mentioned parts can be fully restored.

  5. Selecting information technology for physicians' practices: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Eden Karen

    2002-04-01

    Full Text Available Abstract Background Many physicians are transitioning from paper to electronic formats for billing, scheduling, medical charts, communications, etc. The primary objective of this research was to identify the relationship (if any between the software selection process and the office staff's perceptions of the software's impact on practice activities. Methods A telephone survey was conducted with office representatives of 407 physician practices in Oregon who had purchased information technology. The respondents, usually office managers, answered scripted questions about their selection process and their perceptions of the software after implementation. Results Multiple logistic regression revealed that software type, selection steps, and certain factors influencing the purchase were related to whether the respondents felt the software improved the scheduling and financial analysis practice activities. Specifically, practices that selected electronic medical record or practice management software, that made software comparisons, or that considered prior user testimony as important were more likely to have perceived improvements in the scheduling process than were other practices. Practices that considered value important, that did not consider compatibility important, that selected managed care software, that spent less than $10,000, or that provided learning time (most dramatic increase in odds ratio, 8.2 during implementation were more likely to perceive that the software had improved the financial analysis process than were other practices. Conclusion Perhaps one of the most important predictors of improvement was providing learning time during implementation, particularly when the software involves several practice activities. Despite this importance, less than half of the practices reported performing this step.

  6. Waste processing: new near infrared technologies for material identification and selection

    Science.gov (United States)

    Cesetti, M.; Nicolosi, P.

    2016-09-01

    The awareness of environmental issues on a global scale increases the opportunities for waste handling companies. Recovery is set to become all the more important in areas such as waste selection, minerals processing, electronic scrap, metal and plastic recycling, refuse and the food industry. Effective recycling relies on effective sorting. Sorting is a fundamental step of the waste disposal/recovery process. The big players in the sorting market are pushing for the development of new technologies to cope with literally any type of waste. The purpose of this tutorial is to gain an understanding of waste management, frameworks, strategies, and components that are current and emerging in the field. A particular focus is given to spectroscopic techniques that pertains the material selection process with a greater emphasis placed on the NIR technology for material identification. Three different studies that make use of NIR technology are shown, they are an example of some of the possible applications and the excellent results that can be achieved with this technique.

  7. Communications article

    KAUST Repository

    Fariborzi, Hossein

    2017-07-20

    Seamless, covert communications using a communications system integrated or incorporated within an article of clothing is described. In one embodiment, the communications system is integrated or incorporated into a shoe insole and includes a haptic feedback mechanism, a communications module, a flexible pressure sensor, and a battery. The communications module includes a wireless communications module for wireless communications, a wired interface for wired communications, a microcontroller, and a battery charge controller. The flexible pressure sensor can be actuated by an individual\\'s toe, for example, and communication between two communications nodes can be achieved using coded signals sent by individuals using a combination of long and short presses on the pressure sensor. In response to the presses, wireless communications modules can transmit and receive coded signals based on the presses.

  8. Risk-Informed Decision Making: Application to Technology Development Alternative Selection

    Science.gov (United States)

    Dezfuli, Homayoon; Maggio, Gaspare; Everett, Christopher

    2010-01-01

    NASA NPR 8000.4A, Agency Risk Management Procedural Requirements, defines risk management in terms of two complementary processes: Risk-informed Decision Making (RIDM) and Continuous Risk Management (CRM). The RIDM process is used to inform decision making by emphasizing proper use of risk analysis to make decisions that impact all mission execution domains (e.g., safety, technical, cost, and schedule) for program/projects and mission support organizations. The RIDM process supports the selection of an alternative prior to program commitment. The CRM process is used to manage risk associated with the implementation of the selected alternative. The two processes work together to foster proactive risk management at NASA. The Office of Safety and Mission Assurance at NASA Headquarters has developed a technical handbook to provide guidance for implementing the RIDM process in the context of NASA risk management and systems engineering. This paper summarizes the key concepts and procedures of the RIDM process as presented in the handbook, and also illustrates how the RIDM process can be applied to the selection of technology investments as NASA's new technology development programs are initiated.

  9. Review of the factors affecting the selection and implementation of waste management technologies

    International Nuclear Information System (INIS)

    1999-08-01

    The objective of this publication is to identify and critically review the factors affecting the selection of waste management strategies and technologies; summarize and discuss the options available, and offer a systematic approach for considering these factors to design, install and operate appropriate technologies for waste streams generated. The scope of this publication includes the management of radioactive waste from all orientations including low and intermediate level waste arising from the production of radionuclides and their application in industry, agriculture, medicine, education and research; waste generated from research reactors, power reactors and from nuclear fuel cycle activities including reprocessing high level waste. Although waste from decommissioning is not specifically addressed, the management of this waste is not significantly different from other types of waste in the same category

  10. Low-level radioactive waste technology: a selected, annotated bibliography. [416 references

    Energy Technology Data Exchange (ETDEWEB)

    Fore, C.S.; Carrier, R.F.; Brewster, R.H.; Hyder, L.K.; Barnes, K.A.

    1981-10-01

    This annotated bibliography of 416 references represents the third in a series to be published by the Hazardous Materials Information Center containing scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on disposal site, environmental transport, and waste treatment studies as well as general reviews on the subject. The publication covers both domestic and foreign literature for the period 1951 to 1981. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology, and Site Resources; Regulatory and Economic Aspects; Social Aspects; Transportation Technology; Waste Production; and Waste Treatment. Entries in each of the chapters are further classified as a field study, laboratory study, theoretical study, or general overview involving one or more of these research areas.

  11. Genetic diversity and selection of common bean lines based on technological quality and biofortification.

    Science.gov (United States)

    Steckling, S de M; Ribeiro, N D; Arns, F D; Mezzomo, H C; Possobom, M T D F

    2017-03-22

    The development of common bean cultivars with high technological quality that are biofortified with minerals, is required to meet the demand for food with health benefits. The objectives of this study were to evaluate whether common bean genotypes differ in terms of technological and mineral biofortification traits, to study the correlations between these characters, to analyze the genetic dissimilarity of common bean genotypes, and to select superior lines for these traits. For this, 14 common bean genotypes were evaluated in experiments conducted in three growing seasons in the Rio Grande do Sul State, Brazil. A significant genotype x environment interaction was observed for technological quality (mass of 100 grains and cooking time) and biofortification traits (concentration of potassium, phosphorus, calcium, iron, zinc, and copper). Positive correlation estimates were obtained between phosphorus and potassium (r = 0.575), iron and zinc (r = 0.641), copper and iron (r = 0.729), and copper and phosphorus (r = 0.533). In the main component cluster analysis, four groups of genotypes were formed. The following lines are recommended for selection: LP 11-363 for fast-cooking, CNFC 11 948 for high iron concentration, and LEC 03-14 for high potassium, phosphorus, and calcium concentrations in grains. Common bean lines with high phosphorus and iron concentrations in grains can be indirectly selected based on higher potassium, copper, and zinc concentrations. Controlled crossings between LP 11-363 x CNFC 11 948 and LP 11-363 x LEC 03-14 are recommended to obtain segregating lines that are fast-cooking and biofortified with minerals.

  12. An Ion-selective Electrode for Anion Perchlorate in Thick-film Technology

    Directory of Open Access Journals (Sweden)

    Luís Gil

    2006-04-01

    Full Text Available The ionophore 1,4,7,10,13-penta(n-octyl-1,4,7,10,13-pentaazacyclopentadecane(L1 was used for the development of miniaturised perchlorate-selective electrodes in thick-film technology. Different PVC membranes containing L1 and the plasticizers o-nitrophenyloctyl ether (NPOE, dibutyl phthalate (DBP, bis(2-ethylhexylsebacate (DOS and dibutylsebacate (DBS were prepared and placed on a graphite working electrode manufactured byusing thick film serigraphic technology. The perchlorate selective electrode containing DBSas plasticizer showed a potentiometric Nernstian response of -57 mV per decade in a rangeof perchlorate concentration from 1 x 10-4 to 1 x 10-1 M with a detection limit of 5 x 10-5 M.The ion selective electrodes containing DBP and NPOE as plasticizers exhibit a workingrange from 6.3 x 10-5 to 1 x 10-1 M and 7.4 x 10-5 to 1 x 10-1 M for perchlorate, respectively,with a detection limit of ca. 2.2 x 10-5 M. For all three electrodes a response time of ca. 5 s was found. The prepared electrodes do not show appreciable decay of the slope for at least 25 days. Potentiometric selectivity coefficients (log KpotClO4-,X- with respect to the primaryanion perchlorate were evaluated using the fixed interference method. These coefficients areof the order of 10-1.7 or smaller, indicating the relatively poor interference of the differentanions studied.

  13. Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology.

    Science.gov (United States)

    Chen, Jianyu; Zhang, Zhiguang; Chen, Xianshuai; Zhang, Chunyu; Zhang, Gong; Xu, Zhewu

    2014-11-01

    Recently a new therapeutic concept of patient-specific implant dentistry has been advanced based on computer-aided design/computer-aided manufacturing technology. However, a comprehensive study of the design and 3-dimensional (3D) printing of the customized implants, their mechanical properties, and their biomechanical behavior is lacking. The purpose of this study was to evaluate the mechanical and biomechanical performance of a novel custom-made dental implant fabricated by the selective laser melting technique with simulation and in vitro experimental studies. Two types of customized implants were designed by using reverse engineering: a root-analog implant and a root-analog threaded implant. The titanium implants were printed layer by layer with the selective laser melting technique. The relative density, surface roughness, tensile properties, bend strength, and dimensional accuracy of the specimens were evaluated. Nonlinear and linear finite element analysis and experimental studies were used to investigate the stress distribution, micromotion, and primary stability of the implants. Selective laser melting 3D printing technology was able to reproduce the customized implant designs and produce high density and strength and adequate dimensional accuracy. Better stress distribution and lower maximum micromotions were observed for the root-analog threaded implant model than for the root-analog implant model. In the experimental tests, the implant stability quotient and pull-out strength of the 2 types of implants indicated that better primary stability can be obtained with a root-analog threaded implant design. Selective laser melting proved to be an efficient means of printing fully dense customized implants with high strength and sufficient dimensional accuracy. Adding the threaded characteristic to the customized root-analog threaded implant design maintained the approximate geometry of the natural root and exhibited better stress distribution and

  14. Sensitive Wavelengths Selection in Identification of Ophiopogon japonicus Based on Near-Infrared Hyperspectral Imaging Technology

    Directory of Open Access Journals (Sweden)

    Zhengyan Xia

    2017-01-01

    Full Text Available Hyperspectral imaging (HSI technology has increasingly been applied as an analytical tool in fields of agricultural, food, and Traditional Chinese Medicine over the past few years. The HSI spectrum of a sample is typically achieved by a spectroradiometer at hundreds of wavelengths. In recent years, considerable effort has been made towards identifying wavelengths (variables that contribute useful information. Wavelengths selection is a critical step in data analysis for Raman, NIRS, or HSI spectroscopy. In this study, the performances of 10 different wavelength selection methods for the discrimination of Ophiopogon japonicus of different origin were compared. The wavelength selection algorithms tested include successive projections algorithm (SPA, loading weights (LW, regression coefficients (RC, uninformative variable elimination (UVE, UVE-SPA, competitive adaptive reweighted sampling (CARS, interval partial least squares regression (iPLS, backward iPLS (BiPLS, forward iPLS (FiPLS, and genetic algorithms (GA-PLS. One linear technique (partial least squares-discriminant analysis was established for the evaluation of identification. And a nonlinear calibration model, support vector machine (SVM, was also provided for comparison. The results indicate that wavelengths selection methods are tools to identify more concise and effective spectral data and play important roles in the multivariate analysis, which can be used for subsequent modeling analysis.

  15. Identification of ligand-selective peptidic ActRIIB-antagonists using phage display technology

    Directory of Open Access Journals (Sweden)

    Kotaro Sakamoto

    2017-09-01

    Full Text Available ActRIIB (activin receptor type-2B is an activin receptor subtype constitutively expressed in the whole body, playing a role in cellular proliferation, differentiation, and metabolism. For its various physiological activities, ActRIIB interacts with activin and multiple other ligands including myostatin (MSTN, growth differentiation factor 11 (GDF11, and bone morphogenetic protein 9 (BMP9. Notably, the protein-protein interaction (PPI between ActRIIB and MSTN negatively controls muscular development. Therefore, this PPI has been targeted for effective treatment of muscle degenerative diseases such as muscular dystrophy and sarcopenia. Here, we report the identification of ligand-selective peptidic ActRIIB-antagonists by phage display technology. Our peptides bound to the extracellular domain of ActRIIB, inhibited PPIs between ActRIIB expressed on the cell surface and its ligands, and subsequently suppressed activation of Smad that serves as the downstream signal of the ActRIIB pathway. Interestingly, these peptidic antagonists displayed different ligand selectivities; the AR2mini peptide inhibited multiple ligands (activin A, MSTN, GDF11, and BMP9, AR9 inhibited MSTN and GDF11, while AR8 selectively inhibited MSTN. This is the first report of artificial peptidic ActRIIB-antagonists possessing ligand-selectivity.

  16. LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    King, W

    2007-11-30

    This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA

  17. LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING

    International Nuclear Information System (INIS)

    King, W.

    2007-01-01

    This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA

  18. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-10-17

    Oct 17, 2017 ... Electronic Commerce Research and Applications, 2012, 11(1):75-84. [16] Yue W S, Zin N A M. usabilty evaluation for history educational games. In 2nd. International Conference on Interaction Sciences: Information Technology, Culture and. Human, 2012,pp. 1019-1025. How to cite this article: Ramli R.Z ...

  19. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    Published online: 24 November 2017. ABSTRACT. The control problems for technological objects with distributed state variables and large dead times are discussed in the present article. The creation of control systems using the object model in the control loop is considered. It is shown that the most effective approach for ...

  20. Research Article Special Issue

    African Journals Online (AJOL)

    2017-10-17

    Oct 17, 2017 ... via brain waves study by using electroencephalogram (EEG). International Journal on. Advanced Science, Engineering and Information Technology, 2016, 6(6):1005-1011. How to cite this article: Anoor M M, Khairul AnwarK H, Megat Ali M S A and Jahidin A H. Classification of students' IQ level using ...

  1. Investigation of Sawmill Management and Technology on Waste Reduction at Selected Sawmills in Moratuwa, Sri Lanka

    Directory of Open Access Journals (Sweden)

    H.T.S. Caldera

    2015-09-01

    Full Text Available The demand for sawn timber and wood-based products is rising steadily with new developments and the growing domestic consumption in Sri Lanka. Therefore, it is important to strike a balance between the increasing demand and consumption of forest resources. Thus, the key objective of this study was to investigate the effects of sawmill management and technological parameters on loss in conversion from logs to sawn timber and to compare the sawmill efficiency in private sawmills with the state timber corporation sawmill.Sawmill management and technological parameters were studied in 21 private sawmills and State Timber Corporation sawmill in Kaldemulla to evaluate the effects on loss in conversion. The selected sawmills represent all types available in Sri Lanka, i.e., frame saw, circular saw and band saw mills. Based on the results, mean percentage loss in conversion of teak and mahogany timber for all sawmills (private and State Timber Corporation in Moratuwa found to be 53.10%. Significant differences were observed in loss in conversion values between the three categories of private sawmills as well as within sawmills of the same category. It was shown that loss in conversion values also varied with sawmill management and technological parameters such as type of machinery employed, sharpening frequency and sawyer’s experience, saw setting, availability of log alignment equipment and saw guards, oversizing and sawn timber sizes.

  2. Development Algorithm of the Technological Process of Manufacturing Gas Turbine Parts by Selective Laser Melting

    Science.gov (United States)

    Sotov, A. V.; Agapovichev, A. V.; Smelov, V. G.; Kyarimov, R. R.

    2018-01-01

    The technology of the selective laser melting (SLM) allows making products from powders of aluminum, titanium, heat-resistant alloys and stainless steels. Today the use of SLM technology develops at manufacture of the functional parts. This in turn requires development of a methodology projection of technological processes (TP) for manufacturing parts including databases of standard TP. Use of a technique will allow to exclude influence of technologist’s qualification on made products quality, and also to reduce labor input and energy consumption by development of TP due to use of the databases of standard TP integrated into a methodology. As approbation of the developed methodology the research of influence of the modes of a laser emission on a roughness of a surface of synthesized material was presented. It is established that the best values of a roughness of exemplars in the longitudinal and transversal directions make 1.98 μm and 3.59 μm respectively. These values of a roughness were received at specific density of energy 6.25 J/mm2 that corresponds to power and the speed of scanning of 200 W and 400 mm/s, respectively, and a hatch distance of 0.08 mm.

  3. Integrated technology selection for energy conservation and PAHs control in iron and steel industry: Methodology and case study

    International Nuclear Information System (INIS)

    Li, Li; Lu, Yonglong; Shi, Yajuan; Wang, Tieyu; Luo, Wei; Gosens, Jorrit; Chen, Peng; Li, Haiqian

    2013-01-01

    Energy conservation and PAHs (polycyclic aromatic hydrocarbon) control are two challenges for the iron and steel industry, especially where the industry has developed at high speed. How to select appropriate technologies to improve energy efficiency and control pollution from PAHs simultaneously is encountered by both the researchers and the decision makers. This study sets up a framework on technology selection and combination which integrates technology assessment, multiple objective programming and scenario analysis. It can predict proper technology combination for different emission controls, energy conservation targets and desired levels of production. An iron and steel factory in Southwestern China is cited as a case. It is shown that stricter PAHs control will drive the transformation from process control technology to alternative smelting technology. In low PAHs limit, 25% energy reduction is a threshold. Before inclusion of a restraint on energy consumption at 25% reduction, PAHs emission is the key limiting factor for the technology selection; while after inclusion of this restraint, energy consumption becomes the key limiting factor. The desired level of production will also influence the technology selection. This study can help decision makers to select appropriate technologies to meet the PAHs control objectives and energy conservation strategies in energy-intensive industries. - Highlights: ► We predict technical strategy for energy and PAHs reduction in iron and steel mill. ► With low PAHs control objectives, process control technologies are preferable. ► With medium and high PAHs control goals, alternative smelting technology is dominate. ► In low PAHs control objective, 25% energy reduction is a threshold

  4. Analysis of an Interactive Technology Supported Problem-Based Learning STEM Project Using Selected Learning Sciences Interest Areas (SLSIA)

    Science.gov (United States)

    Kumar, David Devraj

    2017-01-01

    This paper reports an analysis of an interactive technology-supported, problem-based learning (PBL) project in science, technology, engineering and mathematics (STEM) from a Learning Sciences perspective using the Selected Learning Sciences Interest Areas (SLSIA). The SLSIA was adapted from the "What kinds of topics do ISLS [International…

  5. Selected works of basic research on the physics and technology of accelerator driven clean nuclear power system

    International Nuclear Information System (INIS)

    Zhao Zhixiang

    2002-01-01

    38 theses are presented in this selected works of basic research on the physics and technology of accelerator driven clean nuclear power system. It includes reactor physics and experiment, accelerators physics and technology, nuclear physics, material research and partitioning. 13 abstracts, which has been presented on magazines home and abroad, are collected in the appendix

  6. Design and Development of a Technology Platform for DNA-Encoded Library Production and Affinity Selection.

    Science.gov (United States)

    Castañón, Jesús; Román, José Pablo; Jessop, Theodore C; de Blas, Jesús; Haro, Rubén

    2018-01-01

    DNA-encoded libraries (DELs) have emerged as an efficient and cost-effective drug discovery tool for the exploration and screening of very large chemical space using small-molecule collections of unprecedented size. Herein, we report an integrated automation and informatics system designed to enhance the quality, efficiency, and throughput of the production and affinity selection of these libraries. The platform is governed by software developed according to a database-centric architecture to ensure data consistency, integrity, and availability. Through its versatile protocol management functionalities, this application captures the wide diversity of experimental processes involved with DEL technology, keeps track of working protocols in the database, and uses them to command robotic liquid handlers for the synthesis of libraries. This approach provides full traceability of building-blocks and DNA tags in each split-and-pool cycle. Affinity selection experiments and high-throughput sequencing reads are also captured in the database, and the results are automatically deconvoluted and visualized in customizable representations. Researchers can compare results of different experiments and use machine learning methods to discover patterns in data. As of this writing, the platform has been validated through the generation and affinity selection of various libraries, and it has become the cornerstone of the DEL production effort at Lilly.

  7. The Combination of Computational and Biosensing Technologies for Selecting Aptamer against Prostate Specific Antigen

    Directory of Open Access Journals (Sweden)

    Pi-Chou Hsieh

    2017-01-01

    Full Text Available Herein, we report a method of combining bioinformatics and biosensing technologies to select aptamers against prostate specific antigen (PSA. The main objective of this study is to select DNA aptamers with higher binding affinity for PSA by using the proposed method. Based on the five known sequences of PSA-binding aptamers, we adopted the functions of reproduction and crossover in the genetic algorithm to produce next-generation sequences for the computational and experimental analysis. RNAfold web server was utilized to analyze the secondary structures, and the 3-dimensional molecular models of aptamer sequences were generated by using RNAComposer web server. ZRANK scoring function was used to rerank the docking predictions from ZDOCK. The biosensors, the quartz crystal microbalance (QCM and a surface plasmon resonance (SPR instrument, were used to verify the binding ability of selected aptamer for PSA. By carrying out the simulations and experiments after two generations, we obtain one aptamer that can have the highest binding affinity with PSA, which generates almost 2-fold and 3-fold greater measured signals than the responses produced by the best known DNA sequence in the QCM and SPR experiments, respectively.

  8. THE ISSUES OF SELECTING PRIORITIES FOR SCIENTIFIC-TECHNOLOGICAL DEVELOPMENT IN CIRCUMSTANCES OF LIMITED FINANCIAL RESOURCES

    Directory of Open Access Journals (Sweden)

    N. G. Kurakova

    2015-01-01

    Full Text Available The article offers a calculation which demonstrates that the Russian share for research and development (R&D in actual 2016 prices will equal not more than 0,8% from the global budget. With such indicators, Russia will descend from the 9th position, which she took in 2014, to 18th in the world ranking. With that, the number of staff working in the Russian R&D sector equals 10% from the global number of participants in R&D. Using international comparisons there has been given a quantifiable evaluation of US scientific-technological priorities. It is demonstrated, for instance, that every manager responsible for the state reserves expenditure on R&D in USA has an annual budget estimated in several billions of dollars which allows them to identify 3–4 priority projects with a budgets of 100–500 million dollars per year.A suggestion is made that the incomparability of Russia’s internal expenses on development of the citizen’s sciences sector with those of other economically developed countries allows the identification of not more than 2–3 research areas for the country’s scientific-technological development priorities.

  9. A framework for selecting suitable control technologies for nuclear power plant systems

    International Nuclear Information System (INIS)

    Kisner, R.A.

    1992-01-01

    New concepts continue to emerge for controlling systems, subsystems, and components and for monitoring parameters, characteristics, and vital signs in nuclear power plants. The steady stream of new control theories and the evolving state of control software exacerbates the difficulty of selecting the most appropriate control technology for nuclear power plant systems. As plant control room operators increase their reliance on computerized systems, the integration of monitoring, diagnostic, and control functions into a uniform and understandable environment becomes imperative. A systematic framework for comparing and evaluating the overall usefulness of control techniques is needed. This paper describes nine factors that may be used to evaluate alternative control concepts. These factors relate to a control system's potential effectiveness within the context of the overall environment, including both human and machine components. Although not an in-depth study, this paper serves to outline an evaluation framework based on several measures of utility. 32 refs

  10. Bioactive treatment promotes osteoblast differentiation on titanium materials fabricated by selective laser melting technology.

    Science.gov (United States)

    Tsukanaka, Masako; Fujibayashi, Shunsuke; Takemoto, Mitsuru; Matsushita, Tomiharu; Kokubo, Tadashi; Nakamura, Takashi; Sasaki, Kiyoyuki; Matsuda, Shuichi

    2016-01-01

    Selective laser melting (SLM) technology is useful for the fabrication of porous titanium implants with complex shapes and structures. The materials fabricated by SLM characteristically have a very rough surface (average surface roughness, Ra=24.58 µm). In this study, we evaluated morphologically and biochemically the specific effects of this very rough surface and the additional effects of a bioactive treatment on osteoblast proliferation and differentiation. Flat-rolled titanium materials (Ra=1.02 µm) were used as the controls. On the treated materials fabricated by SLM, we observed enhanced osteoblast differentiation compared with the flat-rolled materials and the untreated materials fabricated by SLM. No significant differences were observed between the flat-rolled materials and the untreated materials fabricated by SLM in their effects on osteoblast differentiation. We concluded that the very rough surface fabricated by SLM had to undergo a bioactive treatment to obtain a positive effect on osteoblast differentiation.

  11. Research on the mechanical behaviour of an airplane component made by selective laser melting technology

    Directory of Open Access Journals (Sweden)

    Păcurar Răzvan

    2017-01-01

    Full Text Available The main objective of the presented research consists in the redesign of an airplane component to decrease its weight, without affecting the mechanical behaviour of the component, at the end. Femap NX Nastran and ANSYS FEA programs were used for the shape optimization and for the estimation of the mechanical behaviour of a fixing clamp that was used to sustain the hydraulic pipes that are passing through an airplane fuselage, taking into consideration two types of raw materials – Ti6Al4V and AlSi12 powder from which this component could be manufactured by using the selective laser melting (SLM technology. Based on the obtained results, the airplane component was finally manufactured from titanium alloy using the SLM 250 HL equipment that is available at SLM Solutions GmbH company from Luebeck, in Germany.

  12. Research Article Special Issue

    African Journals Online (AJOL)

    2017-08-08

    Aug 8, 2017 ... The analysis of the known scientific and technological approaches, aimed at the telecommunications network productivity increase, showed that time interval between packet sending by a source node (interpacket gap) plays an important role in the protocols of a transport layer. By selecting this parameter ...

  13. The role of health technology assessment on pharmaceutical reimbursement in selected middle-income countries.

    Science.gov (United States)

    Oortwijn, Wija; Mathijssen, Judith; Banta, David

    2010-05-01

    Middle-income countries are often referred to as developing or emerging economies and face multiple challenges of severe financial stresses in their health care sectors, and high disease burden. The objective of this study is to provide an overview of how health technology assessment (HTA) is used and organized in selected middle-income countries and its role in the process of pharmaceutical coverage. We selected middle-income countries where HTA activities are evident: Argentina, Brazil, China, Colombia, Israel, Mexico, Philippines, Korea, Taiwan, Thailand, and Turkey. We collected and reviewed relevant information to describe the health care and reimbursement systems and how HTA relates to coverage decision-making of pharmaceuticals. This was supplemented by information from a structured survey among professionals working in public and private health insurance, industry, regulatory authorities, ministries of health, academic units or HTA. All countries require market authorization for pharmaceuticals to be sold and most countries have a national plan defining which pharmaceuticals can be reimbursed. However, the use of HTA in reimbursement decisions is still in its early stages with varying levels of HTA guidance implementation. The study provides evidence of the development of HTA in coverage decision-making in middle-income countries. Increased health care spending and the resulting access to modern technology give a strong impetus to HTA. However, HTA is developing with uneven speed in middle-income countries and many countries are building on the organisational and methodological experience from established HTA agencies. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

  14. The Cascading Impacts of Technology Selection: Incorporating Ruby on Rails into ECHO

    Science.gov (United States)

    Pilone, D.; Cechini, M.

    2010-12-01

    NASA’s Earth Observing System (EOS) ClearingHOuse (ECHO) is a SOA based Earth Science Data search and order system implemented in Java with one significant exception: the web client used by 98% of our users is written in Perl. After several decades of maintenance the Perl based application had reached the end of its serviceable life and ECHO was tasked with implementing a replacement. Despite a broad investment in Java, the ECHO team conducted a survey of modern development technologies including Flex, Python/Django, JSF2/Spring and Ruby on Rails. The team ultimately chose Ruby on Rails (RoR) with Cucumber for testing due to its perceived applicability to web application development and corresponding development efficiency gains. Both positive and negative impacts on the entire ECHO team, including our stakeholders, were immediate and sometimes subtle. The technology selection caused shifts in our architecture and design, development and deployment procedures, requirement definition approach, testing approach, and, somewhat surprisingly, our project team structure and software process. This presentation discusses our experiences, including technical, process, and psychological, using RoR on a production system. During this session we will discuss: - Real impacts of introducing a dynamic language to a Java team - Real and perceived efficiency advantages - Impediments to adoption and effectiveness - Impacts of transition from Test Driven Development to Behavior Driven Development - Leveraging Cucumber to provide fully executable requirement documents - Impacts on team structure and roles

  15. Selection of odour removal technologies in wastewater treatment plants: a guideline based on Life Cycle Assessment.

    Science.gov (United States)

    Alfonsín, Carolina; Lebrero, Raquel; Estrada, José M; Muñoz, Raúl; Kraakman, N J R Bart; Feijoo, Gumersindo; Moreira, M Teresa

    2015-02-01

    This paper aims at analysing the environmental benefits and impacts associated with the treatment of malodorous emissions from wastewater treatment plants (WWTPs). The life cycle assessment (LCA) methodology was applied to two biological treatments, namely biofilter (BF) and biotrickling filter (BTF), two physical/chemical alternatives, namely activated carbon tower (AC) and chemical scrubber (CS), and a hybrid combination of BTF + AC. The assessment provided consistent guidelines for technology selection, not only based on removal efficiencies, but also on the environmental impact associated with the treatment of emissions. The results showed that biological alternatives entailed the lowest impacts. On the contrary, the use of chemicals led to the highest impacts for CS. Energy use was the main contributor to the impact related to BF and BTF, whereas the production of glass fibre used as infrastructure material played an important role in BTF impact. Production of NaClO entailed the highest burdens among the chemicals used in CS, representing ∼ 90% of the impact associated to chemicals. The frequent replacement of packing material in AC was responsible for the highest environmental impacts, granular activated carbon (GAC) production and its final disposal representing more than 50% of the impact in most categories. Finally, the assessment of BTF + AC showed that the hybrid technology is less recommendable than BF and BTF, but friendlier to the environment than physical/chemical treatments. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Robotic-Assisted Percutaneous Coronary Intervention: Rationale, Implementation, Case Selection and Limitations of Current Technology

    Directory of Open Access Journals (Sweden)

    Michael Ragosta

    2018-01-01

    Full Text Available Interventional cardiologists have witnessed an explosive growth in the field. A wide array of percutaneous procedures allow us to treat numerous cardiac conditions less invasively. However, the way we work has changed very little over the past decades. We continue to stand at the tableside for prolonged periods of time, exposing ourselves to the very real risks of radiation exposure as well as to the associated orthopedic injuries from radiation protection. The precision of our procedures is limited by the distance from the fluoroscopic images and, furthermore, patients are potentially at risk from operator fatigue caused by a physician standing at the table for prolonged periods while wearing cumbersome radiation protection gear. Robotic-assisted coronary intervention removes the operator from the radiation field and has been shown to markedly reduce operator exposure as well as allow for more precise positioning of balloons and stents. This technology holds great promise for making interventional procedures safer and more comfortable for the operators as well as reducing fatigue, potentially improving patient outcomes. Currently, we are in an ‘early adopter’ phase of this technology and this paper reviews the rationale, methodology, optimal case selection, and limitations of robotic-assisted coronary intervention.

  17. Toxicity and biofilm-based selection for methyl tert-butyl ether bioremediation technology.

    Science.gov (United States)

    Guisado, I M; Purswani, J; Catón-Alcubierre, L; González-López, J; Pozo, C

    2016-12-01

    Extractive membrane biofilm reactor (EMBFR) technology offers productive solutions for volatile and semi-volatile compound removal from water bodies. In this study, the bacterial strains Paenibacillus etheri SH7 T (CECT 8558), Agrobacterium sp. MS2 (CECT 8557) and Rhodococcus ruber strains A5 (CECT 8556), EE6 (CECT 8612) and EE1 (CECT 8555), previously isolated from fuel-contaminated sites, were tested for adherence on tubular semipermeable membranes in laboratory-scale systems designed for methyl tert-butyl ether (MTBE) bioremediation. Biofilm formation on the membrane surface was evaluated through observation by field-emission scanning electron microscope (FESEM) as well as the acute toxicity (as EC 50 ) of the bacterial growth media. Moreover, extracellular polymeric substance (EPS) production for each strain under different MTBE concentrations was measured. Strains A5 and MS2 were biofilm producers and their adherence increased when the MTBE flowed through the inner tubular semipermeable membrane. No biofilm was formed by Paenibacillus etheri SH7 T , nevertheless, the latter and strain MS2 exhibited the lowest toxicity after growth on the EMBFR. The results obtained from FESEM and toxicity analysis demonstrate that bacterial strains R. ruber EE6, A5, P. etheri SH7 T and Agrobacterium sp. MS2 could be excellent candidates to be used as selective inocula in EMBFR technology for MTBE bioremediation.

  18. [Design and fabrication of the custom-made titanium condyle by selective laser melting technology].

    Science.gov (United States)

    Chen, Jianyu; Luo, Chongdai; Zhang, Chunyu; Zhang, Gong; Qiu, Weiqian; Zhang, Zhiguang

    2014-10-01

    To design and fabricate the custom-made titanium mandibular condyle by the reverse engineering technology combined with selective laser melting (SLM) technology and to explore the mechanical properties of the SLM-processed samples and the application of the custom-made condyle in the temporomandibular joint (TMJ) reconstruction. The three-dimensional model of the mandibular condyle was obtained from a series of CT databases. The custom-made condyle model was designed by the reverse engineering software. The mandibular condyle was made of titanium powder with a particle size of 20-65 µm as the basic material and the processing was carried out in an argon atmosphere by the SLM machine. The yield strength, ultimate strength, bending strength, hardness, surface morphology and roughness were tested and analyzed. The finite element analysis (FEA) was used to analyze the stress distribution. The complex geometry and the surface of the custom-made condyle can be reproduced precisely by the SLM. The mechanical results showed that the yield strength, ultimate strength, bending strength and hardness were (559±14) MPa, (659±32) MPa, (1 067±42) MPa, and (212±4)HV, respectively. The surface roughness was reduced by sandblast treatment. The custom-made titanium condyle can be fabricated by SLM technology which is time-saving and highly digitized. The mechanical properties of the SLM sample can meet the requirements of surgical implant material in the clinic. The possibility of fabricating custom-made titanium mandibular condyle combined with the FEA opens new interesting perspectives for TMJ reconstruction.

  19. Software development for the evaluation of the ergonomic compatibility on the selection of advanced manufacturing technology.

    Science.gov (United States)

    Maldonado-Macías, A; Reyes, R; Guillen, L; García, J

    2012-01-01

    Advanced Manufacturing Technology (AMT) is one of the most relevant resources that companies have to achieve competitiveness and best performance. The selection of AMT is a complex problem which involves significant amount of information and uncertainty when multiple aspects must be taken into consideration. Actual models for the selection of AMT are found scarce of the Human Factors and Ergonomics perspective which can lead to a more complete and reliable decision. This paper presents the development of software that enhances the application of an Ergonomic Compatibility Evaluation Model that supports decision making processes taking into consideration ergonomic attributes of designs. Ergonomic Compatibility is a construct used in this model and it is mainly based in the concept of human-artifact compatibility on human compatible systems. Also, an Axiomatic Design approach by the use of the Information Axiom was evolved under a fuzzy environment to obtain the Ergonomic Incompatibility Content. The extension of this axiom for the evaluation of ergonomic compatibility requirements was the theoretical framework of this research. An incremental methodology of four stages was used to design and develop the software that enables to compare AMT alternatives by the evaluation of Ergonomic Compatibility Attributes.

  20. Application of Radiation Chemistry to Some Selected Technological Issues Related to the Development of Nuclear Energy.

    Science.gov (United States)

    Bobrowski, Krzysztof; Skotnicki, Konrad; Szreder, Tomasz

    2016-10-01

    The most important contributions of radiation chemistry to some selected technological issues related to water-cooled reactors, reprocessing of spent nuclear fuel and high-level radioactive wastes, and fuel evolution during final radioactive waste disposal are highlighted. Chemical reactions occurring at the operating temperatures and pressures of reactors and involving primary transients and stable products from water radiolysis are presented and discussed in terms of the kinetic parameters and radiation chemical yields. The knowledge of these parameters is essential since they serve as input data to the models of water radiolysis in the primary loop of light water reactors and super critical water reactors. Selected features of water radiolysis in heterogeneous systems, such as aqueous nanoparticle suspensions and slurries, ceramic oxides surfaces, nanoporous, and cement-based materials, are discussed. They are of particular concern in the primary cooling loops in nuclear reactors and long-term storage of nuclear waste in geological repositories. This also includes radiation-induced processes related to corrosion of cladding materials and copper-coated iron canisters, dissolution of spent nuclear fuel, and changes of bentonite clays properties. Radiation-induced processes affecting stability of solvents and solvent extraction ligands as well oxidation states of actinide metal ions during recycling of the spent nuclear fuel are also briefly summarized.

  1. JPRS Report (Erratum), Science & Technology, Japan, Selections from MITI White Paper on Industrial Technology Trends and Issues

    Science.gov (United States)

    1989-08-30

    microbiology 2. Biomembrane utilization technology EA: Structure, function elucidation 3. Development of biorelated analysis and evaluation systems EA...Max Planck Laboratory AT1T Boll Laboratorio « Source for B: Source for C: Paittur (Persona) inttitut« OECD Science and Technology Indicators

  2. Genetic analysis of a divergent selection for resistance to Rous sarcomas in chickens†. This article is dedicated to the memory of Pierrick Thoraval (1960–2000.

    Directory of Open Access Journals (Sweden)

    Dambrine Ginette

    2004-01-01

    Full Text Available Abstract Selection for disease resistance related traits is a tool of choice for evidencing and exploring genetic variability and studying underlying resistance mechanisms. In this framework, chickens originating from a base population, homozygote for the B19 major histocompatibility complex (MHC were divergently selected for either progression or regression of tumors induced at 4 weeks of age by a SR-D strain of Rous sarcoma virus (RSV. The first generation of selection was based on a progeny test and subsequent selections were performed on full-sibs. Data of 18 generations including a total of 2010 birds measured were analyzed for the tumor profile index (TPI, a synthetic criterion of resistance derived from recording the volume of the tumors and mortality. Response to selection and heritability of TPI were estimated using a restricted maximum likelihood method with an animal model. Significant progress was shown in both directions: the lines differing significantly for TPI and mortality becoming null in the "regressor" line. Heritability of TPI was estimated as 0.49 ± 0.05 and 0.53 ± 0.06 within the progressor and regressor lines respectively, and 0.46 ± 0.03 when estimated over lines. Preliminary results showed within the progressor line a possible association between one Rfp-Y type and the growth of tumors.

  3. Short- and long-term effects of selective dorsal rhizotomy on gross motor function in ambulatory children with spastic diplegia Clinical article

    NARCIS (Netherlands)

    van Schie, P.E.M.; Schothorst, M.; Dallmeijer, A.J.; Vermeulen, R.J.; van Ouwerkerk, W.J.R.; Strijers, R.L.M.; Becher, J.G.

    2011-01-01

    Object. The primary aim of this prospective cohort study was to evaluate the short-term (1 year) and long-term (mean 6 years) effects of selective dorsal rhizotomy (SDR) on gross motor function and spasticity in ambulatory children with spastic diplegia. Secondary aims were to investigate side

  4. Milestone Report:3.2.2.26 Appliances, HVAC & Water Heating R&D-Select Sorption Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ally, Moonis Raza [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-12-01

    The purpose of this report is to select a sorption technology based on recent work completed on characterizing working pairs for both absorption and adsorption technologies based on Global Warming Potential (GWP) of less than 100 (relative to carbon dioxide, 100-year atmospheric life span) and zero Ozone Depletion Potential (ODP). From a total of eighty-three potential working pairs (absorption technology), there were only two candidate working pairs for the absorption technology, and 8 potential working pairs for adsorption technology. After screening these ten potential candidates on the basis of sizes of the desorber, absorber/adsorber, evaporator, condenser, and rectifier (where applicable), the ORNL-Georgia Tech study concluded that best working pairs are NH3-H2O for the most compact system in terms of heat transfer equipment surface area, and NH3-LiNO3 and MeOH-[mmin][DMP] where efficiency is most important. Based on a single-stage absorption and adsorption modeling using the Engineering Equation Solver (EES), the performance of both sorption systems was evaluated from known heat transfer correlations, and thermos-physical properties. Based on these results, the technology chosen is absorption technology. The selected technology is absorption for the reasons cited in Section 4.

  5. The Atomic Papers: A citizen's guide to selected books and articles on the bomb, the arms race, nuclear power, the peace movement, and related issues

    International Nuclear Information System (INIS)

    Burns, G.

    1984-01-01

    The Atomic Papers annotates over 800 books published since 1945 and approximately 300 periodical articles since 1980 on every facet of the nuclear dilemma: the development and effects of the bomb, the arms race, nuclear proliferation, and the peace movement. Work on both sides of the nuclear power controversy also receives substantial attention. All references are to English-language material, and nearly half are to work published since 1980. The concluding chapter, ''The Art of Fission,'' describes over one hundred novels and stories with nuclear themes published since 1945--and, in a few cases, before that date

  6. Selection of sustainable sanitation technologies for urban slums--a case of Bwaise III in Kampala, Uganda.

    Science.gov (United States)

    Katukiza, A Y; Ronteltap, M; Oleja, A; Niwagaba, C B; Kansiime, F; Lens, P N L

    2010-12-01

    Provision of sanitation solutions in the world's urban slums is extremely challenging due to lack of money, space, access and sense of ownership. This paper presents a technology selection method that was used for the selection of appropriate sanitation solutions for urban slums. The method used in this paper takes into account sustainability criteria, including social acceptance, technological and physical applicability, economical and institutional aspects, and the need to protect and promote human health and the environment. The study was carried out in Bwaise III; a slum area in Kampala (Uganda). This was through administering of questionnaires and focus group discussions to obtain baseline data, developing a database to compare different sanitation options using technology selection criteria and then performing a multi-criteria analysis of the technology options. It was found that 15% of the population uses a public pit latrine; 75% uses a shared toilet; and 10% has private, non-shared sanitation facilities. Using the selection method, technologies such as Urine Diversion Dry Toilet (UDDT) and biogas latrines were identified to be potentially feasible sanitation solutions for Bwaise III. Sanitation challenges for further research are also presented. Copyright © 2010 Elsevier B.V. All rights reserved.

  7. THE IMPACT OF SELECTED TECHNOLOGICAL AND MATERIAL PARAMETERS ON THE STRENGTH OF ADHESIVE STEEL SHEETS JOINTS

    Directory of Open Access Journals (Sweden)

    Anna Rudawska

    2017-06-01

    Full Text Available The following paper analyses selected problems regarding the impact of technological parameters and type of adherend material on the strength of adhesive-bonded steel sheet joints. The subject of the test was a single-lap adhesive joint of S235JR steel sheet. Joints were formed on two types of substrates: with or without corrosion products on the surface. The surface of steel sheet adherends was pre-treated with three cleaning solutions: acetone, Wiko industrial degreasing agent and Cortanin F anti-corrosion agent, depend-ing on the state of the surface. Adhesive joints were formed with Epidian 53/ET/100:15 epoxy adhesive. The formed joints were subjected to one of three ageing variants: 14 days, two months and 3 months, which were followed by destructive testing to determine the shear strength of joints. The analysis of results ob-tained in tests indicates that the strength performance of adhesive joints of corrosion-free adherends was characterised by higher values than in corroded steel sheets, regardless of ageing time.

  8. TOUCH INTERACTION WITH 3D GEOGRAPHICAL VISUALIZATION ON WEB: SELECTED TECHNOLOGICAL AND USER ISSUES

    Directory of Open Access Journals (Sweden)

    L. Herman

    2016-10-01

    Full Text Available The use of both 3D visualization and devices with touch displays is increasing. In this paper, we focused on the Web technologies for 3D visualization of spatial data and its interaction via touch screen gestures. At the first stage, we compared the support of touch interaction in selected JavaScript libraries on different hardware (desktop PCs with touch screens, tablets, and smartphones and software platforms. Afterward, we realized simple empiric test (within-subject design, 6 participants, 2 simple tasks, LCD touch monitor Acer and digital terrain models as stimuli focusing on the ability of users to solve simple spatial tasks via touch screens. An in-house testing web tool was developed and used based on JavaScript, PHP, and X3DOM languages and Hammer.js libraries. The correctness of answers, speed of users’ performances, used gestures, and a simple gesture metric was recorded and analysed. Preliminary results revealed that the pan gesture is most frequently used by test participants and it is also supported by the majority of 3D libraries. Possible gesture metrics and future developments including the interpersonal differences are discussed in the conclusion.

  9. GEOMETRIC COMPLEXITY ANALYSIS IN AN INTEGRATIVE TECHNOLOGY EVALUATION MODEL (ITEM FOR SELECTIVE LASER MELTING (SLM#

    Directory of Open Access Journals (Sweden)

    S. Merkt

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Selective laser melting (SLM is becoming an economically viable choice for manufacturing complex serial parts. This paper focuses on a geometric complexity analysis as part of the integrative technology evaluation model (ITEM presented here. In contrast to conventional evaluation methodologies, the ITEM considers interactions between product and process innovations generated by SLM. The evaluation of manufacturing processes that compete with SLM is the main goal of ITEM. The paper includes a complexity analysis of a test part from Festo AG. The paper closes with a discussion of how the expanded design freedom of SLM can be used to improve company operations, and how the complexity analysis presented here can be seen as a starting point for feature-based complexity analysis..

    AFRIKAANSE OPSOMMING: Selektiewe lasersmelting word geleidelik ’n gangbare ekonomiese keuse vir die vervaar-diging van opeenvolgende komplekse onderdele. Die navorsing is toegespits op die ontleding van meetkundige kompleksiteit as ’n gedeelte van ’n integrerende tegnologiese evalueringsmodel. Gemeet teen konvensionele evalueringsmodelle behandel die genoemde metode interaksies tussen produkte- en prosesinnovasies wat gegenereer word. Die navorsing behandel ’n kompleksiteitsontleding van ’n toetsonderdeel van die firma FESTO AG. Die resultaat toon hoe kompleksiteits-analise gebruik kan word as die vertrekpunt vir eienskapsgebaseerde analise.

  10. Decision Analysis For Renewable Energy Technology Selection Delta State Of Nigeria As A Case Study

    Directory of Open Access Journals (Sweden)

    Oseweuba Valentine Okoro

    2015-07-01

    Full Text Available Abstract Recent concerns over global warming as well as other well documented environmental impacts which arise from the utilisation of fossil fuels has led to intensified investigations to identify possible energy alternatives. These investigations sought to establish the feasibility of alternative energy sources to meet not only the increasing demand requirement but ultimately facilitate the realisation of the hypothetical Zero net Carbon pollution target. However while energy and environment enthusiasts consistently insist on the viability of Renewable Energy Technologies RETs as a conduit for meeting energy demand without compromising the need for sustainability deciding which RET or indeed combination of RETs will be most appropriate based on the existing economic legal as well as environmental framework remains a realistic challenge. This investigation therefore attempted to present a decision making process that will consider the four criteria inputs widely recognised as requirements for sustainable development. The RETs where subsequently evaluated via the consideration of these criteria as the only requirement for RET selection assuming the region under consideration was independent of the grid or a fossil fuel generator. The approach employed therefore presented a valid method for an initial and basic appraisal of RETs in the development of sustainable energy systems with the defining assumption being that the technical indicator incorporated the ability of the RET to meet the primary load. A preferential ranking was finally achieved via the utilisation of simple matrix models thus facilitating the development of a theoretical basis for the practical implementation of the most appropriate RET.

  11. Climate Change Modeling Methodology Selected Entries from the Encyclopedia of Sustainability Science and Technology

    CERN Document Server

    2012-01-01

    The Earth's average temperature has risen by 1.4°F over the past century, and computer models project that it will rise much more over the next hundred years, with significant impacts on weather, climate, and human society. Many climate scientists attribute these increases to the buildup of greenhouse gases produced by the burning of fossil fuels and to the anthropogenic production of short-lived climate pollutants. Climate Change Modeling Methodologies: Selected Entries from the Encyclopedia of Sustainability Science and Technology provides readers with an introduction to the tools and analysis techniques used by climate change scientists to interpret the role of these forcing agents on climate.  Readers will also gain a deeper understanding of the strengths and weaknesses of these models and how to test and assess them.  The contributions include a glossary of key terms and a concise definition of the subject for each topic, as well as recommendations for sources of more detailed information. Features au...

  12. Decision support tools for evaluation and selection of technologies for soil remediation and disposal of halogenated waste

    Energy Technology Data Exchange (ETDEWEB)

    Khelifi, O.; Zinovyev, S.; Lodolo, A.; Vranes, S.; Miertus, S. [ICS-UNIDO, Trieste (Italy)

    2004-09-15

    One of the most justified demands in abating the pollution created by polychlorinated substances is the remediation of contaminated sites, mainly soil remediation, which is also the most complex technical task in removing pollution because of the necessity to process huge quantities of matrix and to account for numerous side factors. The commercial technologies are usually based on rather direct and simplified but also secure processes, which often approach remediation in a general way, where different types of pollutants can be decontaminated at the same time by each technology. A number of different soil remediation technologies are nowadays available and the continuous competition among environmental service companies and technology developers generates a further increase in the clean-up options. The demand for decision support tools that could help decision makers in selecting the most appropriate technology for the specific contaminated site has consequently increased. These decision support tools (DST) are designed to help decision makers (site owners, local community representatives, environmentalists, regulators, etc.) to assess available technologies and preliminarily select the preferred remedial options. The analysis for the identification of the most suitable options in the DST is based on technical, economic, environmental, and social criteria. These criteria are ranked by all parties involved in the decision process to determine their relative importance for a particular remediation project. The aim of the present paper is to present the new approach for building decision support tool to evaluate different technologies for remediation and disposal of halogenated waste.

  13. Experimental Design for Evaluating Selected Nondestructive Measurement Technologies - Advanced Reactor Technology Milestone: M3AT-16PN2301043

    Energy Technology Data Exchange (ETDEWEB)

    Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, Evelyn H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pitman, Stan G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dib, Gerges [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Roy, Surajit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Good, Morris S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Walker, Cody M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-07-16

    The harsh environments in advanced reactors (AdvRx) increase the possibility of degradation of safety-critical passive components, and therefore pose a particular challenge for deployment and extended operation of these concepts. Nondestructive evaluation technologies are an essential element for obtaining information on passive component condition in AdvRx, with the development of sensor technologies for nondestructively inspecting AdvRx passive components identified as a key need. Given the challenges posed by AdvRx environments and the potential needs for reducing the burden posed by periodic in-service inspection of hard-to-access and hard-to-replace components, a viable solution may be provided by online condition monitoring of components. This report identifies the key challenges that will need to be overcome for sensor development in this context, and documents an experimental plan for sensor development, test, and evaluation. The focus of initial research and development is on sodium fast reactors, with the eventual goal of the research being developing the necessary sensor technology, quantifying sensor survivability and long-term measurement reliability for nondestructively inspecting critical components. Materials for sensor development that are likely to withstand the harsh environments are described, along with a status on the fabrication of reference specimens, and the planned approach for design and evaluation of the sensor and measurement technology.

  14. The Relationship between Selected Educational Technologies and Student-Centered versus Teacher-Centered Instruction

    Science.gov (United States)

    Kollmer, Michael J.

    2013-01-01

    Not all teachers and students have equal access to technology. This inequality of access creates an uneven instructional practice that may result in varied student learning. By and large, students have limited access to technology within the confines of the classroom. New educational technologies provide schools with an opportunity to broaden and…

  15. Technology Expenditures: A Policy Analysis in a Selected School and Return on Investment

    Science.gov (United States)

    Ferguson, Timothy Brian

    2012-01-01

    The process of retooling schools to prepare students for the Twenty-First Century requires that schools invest in technology resources and ongoing professional development for teachers to support the transformation of teaching and learning practices through technology integration. Technology resources are still considered to be educational…

  16. The impacts of the St. Patrick's Day superstorm on selected technologies

    Science.gov (United States)

    Carter, B. A.; Yizengaw, E.; Lin, C. S.; Pradipta, R.; Norman, R.; Tseng, T.; Bennett, J.; Bishop, R. L.; Weygand, J. M.; Francis, M.; Terkildsen, M. B.; Groves, K. M.; Caton, R. G.; Tripathi, N.; Zhang, K.

    2015-12-01

    In the past, significant research efforts have been directed towards understanding how severe geomagnetic storms affect the near-Earth space environment. From this research, we have learned that many technologies are affected by these severe space weather events. The 2015 St. Patrick's Day geomagnetic storm has provided a great opportunity to analyze three selected space weather phenomena that adversely impact modern technologies; (1) Geomagnetically Induced Currents (GICs), (2) increased thermospheric mass density, and (3) the occurrence of Equatorial Plasma Bubbles (EPBs). The serious effects of GICs on power grids in the high-latitude regions is well known. Recent research has indicated that the equatorial region is also susceptible to increased GIC activity due to the equatorial electrojet. Thus, an examination of the equatorial magnetometer data during the St. Patrick's Day storm will be presented. It is also well understood that during geomagnetic storms, the thermospheric mass density at a given altitude increases due to the increase in Joule heating in the high-latitude regions. As a consequence of this, low-Earth orbiting satellites and space debris experience increased atmospheric drag. Changes in atmospheric drag causes orbits to be perturbed, resulting in less accurate orbit predictions. An investigation of the orbits of several low-Earth orbiting satellites will be presented and discussed in the context of collision avoidance, as part of the ongoing space debris problem. Finally, Equatorial Plasma Bubbles (EPBs) are a common phenomenon in the nighttime low-latitude ionosphere. EPBs are known to cause random fluctuations (i.e., scintillations) in the amplitude and phase of trans-ionospheric radio signals. While EPBs have been reported during both geomagnetically quiet and disturbed periods, research clearly indicates that the occurrence of EPBs is dependent on the geomagnetic activity level. The occurrence of EPBs around the world will be presented

  17. Does Personality Matter? Applying Holland's Typology to Analyze Students' Self-Selection into Science, Technology, Engineering, and Mathematics Majors

    Science.gov (United States)

    Chen, P. Daniel; Simpson, Patricia A.

    2015-01-01

    This study utilized John Holland's personality typology and the Social Cognitive Career Theory (SCCT) to examine the factors that may affect students' self-selection into science, technology, engineering, and mathematics (STEM) majors. Results indicated that gender, race/ethnicity, high school achievement, and personality type were statistically…

  18. A methodology for the valuation and selection of adaptable technology portfolios and its application to small and medium airports

    Science.gov (United States)

    Pinon, Olivia J.

    The increase in the types of airspace users (large aircraft, small and regional jets, very light jets, unmanned aerial vehicles, etc.), as well as the very limited number of future new airport development projects are some of the factors that will characterize the next decades in air transportation. These factors, associated with a persistent growth in air traffic will worsen the current gridlock situation experienced at some major airports. As airports are becoming the major capacity bottleneck to continued growth in air traffic, it is therefore primordial to make the most efficient use of the current, and very often, underutilized airport infrastructure. This research thus proposes to address the increase in air traffic demand and resulting capacity issues by considering the implementation of operational concepts and technologies at underutilized airports. However, there are many challenges associated with sustaining the development of this type of airports. First, the need to synchronize evolving technologies with airports’ needs and investment capabilities is paramount. Additionally, it was observed that the evolution of secondary airports, and their needs, is tightly linked to the environment in which they operate. In particular, sensitivity of airports to changes in the dynamics of their environment is important, therefore requiring that the factors that drive the need for technology acquisition be identified and characterized. Finally, the difficulty to evaluate risk and make financially viable decisions, particularly when investing in new technologies, cannot be ignored. This research provides a methodology that addresses these challenges and ensures the sustainability of airport capacity-enhancement investments in a continuously changing environment. In particular, it is articulated around the need to provide decision makers with the capability to valuate and select adaptable technology portfolios to ensure airport financial viability. Hence, the four

  19. CHARACTERIZING COSTS, SAVINGS AND BENEFITS OF A SELECTION OF ENERGY EFFICIENT EMERGING TECHNOLOGIES IN THE UNITED STATES

    Energy Technology Data Exchange (ETDEWEB)

    Xu, T.; Slaa, J.W.; Sathaye, J.

    2010-12-15

    Implementation and adoption of efficient end-use technologies have proven to be one of the key measures for reducing greenhouse gas (GHG) emissions throughout the industries. In many cases, implementing energy efficiency measures is among one of the most cost effective investments that the industry could make in improving efficiency and productivity while reducing CO2 emissions. Over the years, there have been incentives to use resources and energy in a cleaner and more efficient way to create industries that are sustainable and more productive. With the working of energy programs and policies on GHG inventory and regulation, understanding and managing the costs associated with mitigation measures for GHG reductions is very important for the industry and policy makers around the world. Successful implementation of emerging technologies not only can help advance productivities and competitiveness but also can play a significant role in mitigation efforts by saving energy. Providing evaluation and estimation of the costs and energy savings potential of emerging technologies is the focus of our work in this project. The overall goal of the project is to identify and select emerging and under-utilized energy-efficient technologies and practices as they are important to reduce energy consumption in industry while maintaining economic growth. This report contains the results from performing Task 2"Technology evaluation" for the project titled"Research Opportunities in Emerging and Under-Utilized Energy-Efficient Industrial Technologies," which was sponsored by California Energy Commission and managed by CIEE. The project purpose is to analyze market status, market potential, and economic viability of selected technologies applicable to the U.S. In this report, LBNL first performed re-assessments of all of the 33 emerging energy-efficient industrial technologies, including re-evaluation of the 26 technologies that were previously identified by Martin et al. (2000) and

  20. Factors Influencing the Selection of the Systems Integration Organizational Model Type for Planning and Implementing Government High-Technology Programs

    Science.gov (United States)

    Thomas, Leann; Utley, Dawn

    2006-01-01

    While there has been extensive research in defining project organizational structures for traditional projects, little research exists to support high technology government project s organizational structure definition. High-Technology Government projects differ from traditional projects in that they are non-profit, span across Government-Industry organizations, typically require significant integration effort, and are strongly susceptible to a volatile external environment. Systems Integration implementation has been identified as a major contributor to both project success and failure. The literature research bridges program management organizational planning, systems integration, organizational theory, and independent project reports, in order to assess Systems Integration (SI) organizational structure selection for improving the high-technology government project s probability of success. This paper will describe the methodology used to 1) Identify and assess SI organizational structures and their success rate, and 2) Identify key factors to be used in the selection of these SI organizational structures during the acquisition strategy process.

  1. Optimal Location, Sizing, and Appropriate Technology Selection of Distributed Generators for Minimizing Power Loss Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    T. R. Ayodele

    2015-01-01

    Full Text Available Genetic algorithm (GA is utilized to select most suitable Distributed Generator (DG technology for optimal operation of power system as well as determine the optimal location and size of the DG to minimize power loss on the network. Three classes of DG technologies, synchronous generators, asynchronous generators, and induction generators, are considered and included as part of the variables for the optimization problem. IEEE 14-bus network is used to test the applicability of the algorithm. The result reveals that the developed algorithm is able to successfully select the most suitable DG technology and optimally size and place the DGs to minimize power loss in the network. Furthermore, optimum multiple placement of DG is considered to see the possible impact on power loss in the network. The result reveals that multiple placements can further reduce the power loss in the network.

  2. Impact of genetically improved fish species and technology on selected hatchery and fish production in Bangladesh

    Directory of Open Access Journals (Sweden)

    MS Islam

    2017-06-01

    Full Text Available The study was carried out in IAPP commanding areas from July to September 2015. A total of 8 hatchery and 240 farmers were selected for this study from Rangpur and Barisal region. About 153% Tilapia production increased which was from 34 to 86 lakh, which was 148% in Rangpur district. Thai koi production was increased about 320% in Rangpur and it was 152% in Barisal. It was observed that, per hatchery Tilapia profit was Tk. 17.35 lakh and Tk. 17.18 lakh in Rangpur and Barisal, respectively. While, total profit was 3.9 times more for Thai koi in Rangpur and it was about 1.7 times more in Barisal after IAPP-BFRI project implementation. Impact of improved germplasm on grow out system was estimated. Finding shows that before IAPP-BFRI project the average harvesting weight of tilapia fish was 122g but after using IAPP-BFRI germplasm, it increased to 194g in Rangpur district. In case of Thai Koi, the harvesting weight gain was 26% in Rangpur district and it was statistically significant at 1% level. Survey results also show that per acre profit was only Tk.86671 for Tilapia farming before IAPP whereas it was increased to Tk. 234853 after IAPP-BFRI intervention. At the same time, profit from Thai Koi was increased about 189% after IAPPBFRI activities. Similarly, profit was increased about 86% in case of Pangus farming and this positive impact was statistically significant at 1% level. Therefore, it may conclude that, farmers can significantly increase Tilapia, Thai Koi and Pangus production as well as can maximize profit using IAPP technology.

  3. GENERIC VERIFICATION PROTOCOL FOR DETERMINATION OF EMISSIONS REDUCTIONS FROM SELECTIVE CATALYTIC REDUCTIONS CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

    Science.gov (United States)

    The protocol describes the Environmental Technology Verification (ETV) Program's considerations and requirements for verification of emissions reduction provided by selective catalytic reduction (SCR) technologies. The basis of the ETV will be comparison of the emissions and perf...

  4. EDITORIAL: Selected articles from `The 8th Edoardo Amaldi Conference on Gravitational Waves (Amaldi 8)', Columbia University, New York, 22-26 June 2009 Selected articles from `The 8th Edoardo Amaldi Conference on Gravitational Waves (Amaldi 8)', Columbia University, New York, 22-26 June 2009

    Science.gov (United States)

    Marka, Zsuzsa; Marka, Szabolcs

    2010-04-01

    received special attention at the meeting. For the first time in the history of Amaldi conferences, plenary and contributed sessions were held to transfer ideas and experience gained with gravitational-wave science inspired education and outreach projects. Additionally, Columbia University faculties working in frontier fields, which currently may not have a direct connection to the field of gravitational-wave science, gave enthralling presentations in the form of a `wake-up' lecture series. The meeting also facilitated the exchange of scientific results and new ideas among all members of gravitational-wave experiment collaborations and the gravitational-wave theory community. Additionally, future directions in gravitational-wave detection were discussed in a special session dedicated to the Gravitational Wave International Committee Roadmap. A highly entertaining and inspiring public talk entitled `Songs from space: black holes and the Big Bang in audio' was given by Janna Levin and it attracted over 300 young and old science enthusiasts from and around New York City. This special issue of Classical and Quantum Gravity (Volume 27, Number 8, 2010) is published as the proceedings of Amaldi8. It contains the overview articles by invited plenary speakers, and some of the highlights of the conference as selected by session chairs and organizers. Other Amaldi8 talks and posters appear in the refereed issue of the electronic Journal of Physics: Conference Series. This issue of Classical and Quantum Gravity and the Journal of Physics: Conference Series issue will be electronically linked. The conference organizers gratefully acknowledge the financial support of Columbia University in the City of New York, the International Union of Pure and Applied Physics and the United States National Science Foundation. We would like to thank the Gravitational Wave International Committee for their scientific oversight, the Local Organizing Committee for program selection, and the session

  5. Selection of human capital in metallurgical companies using information technology (IT

    Directory of Open Access Journals (Sweden)

    I. Iancu

    2013-10-01

    Full Text Available Personnel selection is a process that takes place in a company in order to have better business performance and competitive advantage. Nowadays, companies have realized the importance of human capital as a necessity for survival in today’s competitive market. There are several methods for selecting staff, but this paper seeks to demonstrate that this selection can be done with the help of an expert system. Metallurgical companies face even greater challenges for managing personnel selection. This research will discover and test the key elements of management personnel selection and implementation of an expert system.

  6. Decision Analysis Science Modeling for Application and Fielding Selection Applied to Metal Decontamination Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lagos, L.E.; Ebadian, M.A.

    1998-01-01

    During the decontamination and decommissioning (D and D) activities being conducted by the U.S. Department of Energy (DOE), approximately 550,000 metric tons of contaminated metal will be generated by the disposition of contaminated buildings. The majority of the structural steel is considered to be radiologically contaminated. The D and D activities require the treatment of the structural steel to reduce occupational and environmental radiological exposures during dismantlement. Treatment technologies may also be required for possible recycling. Many proven commercial treatment technologies are available. These treatment processes vary in aggressiveness, safety requirements, secondary waste generation, necessary capital, and operation and maintenance costs. Choosing the appropriate technology to meet the decontamination objectives for structural steel is a difficult process. A single information source comparing innovative and nuclear and non-nuclear technologies in the areas of safety, cost and effectiveness is not currently commercially available to perform a detailed analysis. This study presents comparable data related to operation and maintenance, cost, and health and safely aspects of three readily available technologies and one innovative technology for nuclear decontamination. The technologies include Advance Recyclable Media System (ARMS{trademark}), NELCO Porta Shot Blast{trademark} (JHJ-2000), Pegasus Coating Removal System 7 (PCRS-7) and the innovative laser ablation technology called the Yag Eraser{trademark}.

  7. 3D Technology Selection for a Virtual Learning Environment by Blending ISO 9126 Standard and AHP

    Science.gov (United States)

    Cetin, Aydin; Guler, Inan

    2011-01-01

    Web3D presents many opportunities for learners in a virtual world or virtual environment over the web. This is a great opportunity for open-distance education institutions to benefit from web3d technologies to create courses with interactive 3d materials. There are many open source and commercial products offering 3d technologies over the web…

  8. Transfer of aerospace technology to selected public sector areas of concern

    Science.gov (United States)

    Berke, J. G.

    1972-01-01

    The activities of the NASA Technology Applications Team at Stanford Research Institute, California are discussed. The specific activities in the fields of criminalistics and transportation are reported. The overall objectives of the program are stated on the basis of successful technology transfer and providing appropriate visibility for program activities.

  9. APPLICATION OF THE MODEL CERNE FOR THE ESTABLISHMENT OF CRITERIA INCUBATION SELECTION IN TECHNOLOGY BASED BUSINESSES : A STUDY IN INCUBATORS OF TECHNOLOGICAL BASE OF THE COUNTRY

    Directory of Open Access Journals (Sweden)

    Clobert Jefferson Passoni

    2017-03-01

    Full Text Available Business incubators are a great source of encouragement for innovative projects, enabling the development of new technologies, providing infrastructure, advice and support, which are key elements for the success of new business. The technology-based firm incubators (TBFs, which are 154 in Brazil. Each one of them has its own mechanism for the selection of the incubation companies. Because of the different forms of management of incubators, the business model CERNE - Reference Center for Support for New Projects - was created by Anprotec and Sebrae, in order to standardize procedures and promote the increase of chances for success in the incubations. The objective of this study is to propose selection criteria for the incubation, considering CERNE’s five dimensions and aiming to help on the decision-making in the assessment of candidate companies in a TBF incubator. The research was conducted from the public notices of 20 TBF incubators, where 38 selection criteria were identified and classified. Managers of TBF incubators validated 26 criteria by its importance via online questionnaires. As a result, favorable ratings were obtained to 25 of them. Only one criterion differed from the others, with a unfavorable rating.

  10. [The equivalence and interchangeability of medical articles].

    Science.gov (United States)

    Antonov, V S

    2013-11-01

    The information concerning the interchangeability of medical articles is highly valuable because it makes it possible to correlate most precisely medical articles with medical technologies and medical care standards and to optimize budget costs under public purchasing. The proposed procedure of determination of interchangeability is based on criteria of equivalence of prescriptions, functional technical and technological characteristics and effectiveness of functioning of medical articles.

  11. Impact for the 80's: Proceedings of a Conference on Selected Technology for Business and Industry

    Science.gov (United States)

    1980-01-01

    Various aspects of advanced energy technology are discussed. Specific emphasis is given to: aircraft propulsion; wind power commercialization; materials and structures, lubrication and bearings; Stirling and gas turbine engines; and electric and hybrid vehicles.

  12. Effect of Economic Growth, Trade Openness, Urbanization, and Technology on Environment of Selected Asian Countries

    OpenAIRE

    Ameer, Ayesha; Munir, Kashif

    2016-01-01

    The aim of this study is to examine the impact of trade openness, urban population, technology and economic growth on environment of Asian economies i.e. Bangladesh, Hong Kong, India, Indonesia, Iran, Malaysia, Pakistan, Philippines, Singapore, Sri Lanka, and Thailand. The specific objectives of this study are tend to evaluate the effect of trade openness, technology, urbanization and economic growth on surroundings and environment (CO2 and SO2 emission). This study measures environmental eff...

  13. An Investigation of the Linkage between Technology-Based Activities and STEM Major Selection in 4-Year Postsecondary Institutions in the United States: Multilevel Structural Equation Modelling

    Science.gov (United States)

    Lee, Ahlam

    2015-01-01

    Among the disciplines of science, technology, engineering, and math (STEM), much attention has been paid to the influences of math- and science-related learning contexts on students' STEM major selection. However, the technology and engineering learning contexts that are linked to STEM major selection have been overlooked. In response, a…

  14. Minutes of evidence taken before the Select Committee on Science and Technology (Sub-Committee II). Thursday 15 November 1990. AEA Technology and Department of Energy

    International Nuclear Information System (INIS)

    1990-01-01

    The evidence presented to the select committee is set out and explained. This evidence covers international scientific programmes carried out by AEA Technology. The evidence is in two main blocks; one covering AEA Fusion and the other AEA programmes of international collaborative research and development. AEA Fusion includes JET, the other programmes cover fast reactors, safeguards, safety and reliability, thermal reactors, petroleum services, environment and energy, decommissioning and waste. The advantages and disadvantages of international collaboration are considered, as is the funding arrangement for each programme. Three representatives from AEA Technology were then questioned and the debate reported verbatim. A memorandum from the Department of Energy sets out its involvement with international scientific programmes - the advantages, disadvantages and funding. Two witnesses from the Department of Energy were then examined and the questions and answers are reported verbatim. (UK)

  15. RESEARCH ARTICLE Analysis of polymorphisms and selective ...

    Indian Academy of Sciences (India)

    2017-01-27

    Jan 27, 2017 ... collected in Keningau, haplotypes K2, K9, K10, K11, K12, K13 and K14 were exclusively from Kudat while haplotypes K6 and K8 were found only from Kota Kinabalu. Haplotypes K4, K5 and K7 consisted of samples from all the three regions, indicating similar patterns of polymorphism from the different.

  16. RESEARCH ARTICLE Biodiversity and selection for scrapie ...

    Indian Academy of Sciences (India)

    Baylis M., Houston F., Kao R.R., McLean A.R., Hunter N. and Gravenor M.B. 2002b BSE – a wolf in sheep's clothing?. Trends. Microbiol. 10, 563–570. Billinis C., Psychas V., Leontides L., Spyrou V., Argyroudis S., Vlemmas I. et al. 2004 Prion protein gene polymorphisms in healthy and scrapie-affected sheep in Greece.

  17. ORIGINAL ARTICLES Selective cerebral hypothermia for post ...

    African Journals Online (AJOL)

    scalp temperature variation was reduced from 22°C to l2°C using this method. Nasopharyngeal .... morphine 0.03 mg/kg was given as a slow intravenous bolus. Apart from the cooling and additional sedation and .... limits by day 4 after treatment with intravenous vitamin K. No infant acquired infection during or after the.

  18. ORIGINAL ARTICLE Shade Tree Selection and Management ...

    African Journals Online (AJOL)

    wonde

    . Beer J. Muschler R. Kass D. and. Somarriba E. 1998. Shade management in coffee and cacao plantations. Agroforestry Systems. 38:139–164. Cheng S. Hiwatashi Y. Imai H. Naito M. and Numata, T. 1998. Deforestation and degradation of.

  19. High-Molecular Compounds (Selected Articles).

    Science.gov (United States)

    1987-09-03

    oxidative polycondensation in pyridine with catalytic quantities CuCi degree of polycondensation n XV was equal to 5, during application of threefold...15 Table 1. Dependence of molecular weight of oligomer XV on I quantity of pyridine . FOOTNOTE k. Quantity of diacetylene X - 500, CuCi - 50 mg

  20. Selected Current Acquisitions and Articles from Periodicals

    Science.gov (United States)

    1994-06-01

    Oxford University Press, 1994. KD540 .G73 1994 LAW--SOCIAL ASPECTS--UNITED STATES. Kennedy, Duncan. Sexy dressing, etc. Cambridge, Mass. i Harvard...Interest No.35:3- 17 Spring 󈨢. Regan, Patrick M. War Toys, War Movies , and the Militarization of the United States, 1900-85. Journal of Peace Resear’h 31

  1. Application of interval 2-tuple linguistic MULTIMOORA method for health-care waste treatment technology evaluation and selection.

    Science.gov (United States)

    Liu, Hu-Chen; You, Jian-Xin; Lu, Chao; Shan, Meng-Meng

    2014-11-01

    The management of health-care waste (HCW) is a major challenge for municipalities, particularly in the cities of developing countries. Selection of the best treatment technology for HCW can be viewed as a complicated multi-criteria decision making (MCDM) problem which requires consideration of a number of alternatives and conflicting evaluation criteria. Additionally, decision makers often use different linguistic term sets to express their assessments because of their different backgrounds and preferences, some of which may be imprecise, uncertain and incomplete. In response, this paper proposes a modified MULTIMOORA method based on interval 2-tuple linguistic variables (named ITL-MULTIMOORA) for evaluating and selecting HCW treatment technologies. In particular, both subjective and objective importance coefficients of criteria are taken into consideration in the developed approach in order to conduct a more effective analysis. Finally, an empirical case study in Shanghai, the most crowded metropolis of China, is presented to demonstrate the proposed method, and results show that the proposed ITL-MULTIMOORA can solve the HCW treatment technology selection problem effectively under uncertain and incomplete information environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Influence of existing secondary forest road network on the selection of timber extraction technologies at the tactical level of planning

    Directory of Open Access Journals (Sweden)

    Lepoglavec Kruno

    2015-01-01

    Full Text Available Planning is an intellectually demanding process that requires a conscious determination of actions and decisions based on related purpose, knowledge and right decisions. During planning timber harvesting it is very important to choose the best possible technology for timber extraction. The use of multi-criteria-decision-making models is a very good way of dealing with various forestry issues especially in terms of choosing the best applicable technology for timber extraction. Modern forest management in the Republic of Croatia in terms of timber harvesting mostly relies on ground based wheeled systems. The goal of this research is to show how the current way of planning timber harvesting (timber extraction and accordingly the construction of secondary forest road network affects future planning and introduction of »new« technologies for timber extraction i.e. forest cableway. Analysis of suitable forest stands for different timber extraction technologies s was carried out in the management unit Garjevica-Čazma with an area of 4380.20 ha. The paper presents multi-criteria-decision-making model for defining terrain suitable for ground based wheeled systems (skidder with a winch and forwarder and forest cableway on the base of raster maps (grid of 20×20 m i.e. 0.04 ha. The criteria used to select different technologies for timber extraction were: terrain slope, distance from the forest road, distance from the skid road and harvesting density. Analysis using GIS tools in ArcGIS and Idrisi applications goes in two directions, first the analysis of suitability of using selected technologies for timber extraction using four criteria, and comparison with results of the analysis where the criterion »distance from the skid road« has been excluded.

  3. Review of state of the art technologies of selective catalytic reduction of NOx from diesel engine exhaust

    International Nuclear Information System (INIS)

    Guan, Bin; Zhan, Reggie; Lin, He; Huang, Zhen

    2014-01-01

    Increasingly stringent emission legislations, such as US 2010 and Euro VI, for NO x in mobile applications will require the use of intensification of NO x reduction aftertreatment technologies, such as the selective catalytic reduction (SCR). Due to the required higher deNO x efficiency, a lot of efforts have recently been concentrated on the optimization of the SCR systems for broadening the active deNO x temperature window as widely as possible, especially at low temperatures, enhancing the catalysts durability, and reducing the cost of the deNO x system. This paper provides a comprehensive overview of the state-of-the-art SCR technologies, including the alternative ammonia generation from the solid reductants, Vanadium-based, Cu-zeolite (CuZ) and Fe-zeolite (FeZ) based, and the novel chabazite zeolite with small pore size SCR catalysts. Furthermore, the progresses of the highly optimized hybrid approaches, involving combined CuZ and FeZ SCR, passive SCR, integration of DOC + (DPF, SCR), as well as SCR catalyst coated on DPF (referred as SCRF hereinafter) systems are well discussed. Even though SCR technology is considered as the leading NO x aftertreatment technology, attentions have been paid to the adverse by-products, such as NH 3 and N 2 O. Relevant regulations have been established to address the issues. - Highlights: •The review of state of the art technologies of selective catalytic reduction of NO x . •The mainstream V-based, Cu- and Fe-zeolite, and chabazite catalysts are illustrated. •The development of highly optimized hybrid integration SCR systems are analyzed. •The by-products of SCR systems and the corresponding regulations are discussed. •The future perspectives of the advanced SCR technologies are described

  4. Clinical marginal and internal fit of metal ceramic crowns fabricated with a selective laser melting technology.

    Science.gov (United States)

    Huang, Zhuoli; Zhang, Lu; Zhu, Jingwei; Zhang, Xiuyin

    2015-06-01

    Selective laser melting (SLM) technology has been introduced to fabricate dental restorations. However, the fit of these restorations still needs further study. The purpose of this in vivo investigation was to compare the marginal and internal fit of SLM metal ceramic crowns with 2 lost-wax cast metal ceramic crowns and to evaluate the influence of tooth type on the marginal and internal fit of these crowns. A total of 330 metal ceramic crowns were evaluated. The metal copings were fabricated with SLM Co-Cr, cast Au-Pt, and cast Co-Cr alloy (n=110). The marginal and internal gaps of crowns were recorded by using a replica technique. The anterior and premolar replicas were sectioned 2 times, and molar replicas were sectioned 4 times. The marginal and internal gap width of each cross section was examined by stereomicroscope at ×30 magnification. Two-way analysis of variance was performed to identify the statistical difference among the groups. The marginal fit of the SLM Co-Cr group (75.6 ±32.6 μm) was not different from the cast Au-Pt group (76.8 ±32.1 μm) (P>.05) but was better than the cast Co-Cr group (91.0 ±36.3 μm) (P.05). The mean occlusal gap width of the SLM Co-Cr group (309.8 ±106.6 μm) was significantly higher than that of the cast Au-Pt group (254.6 ±109.6 μm) and the cast Co-Cr group (249.6 ±110.4 μm) (P.05). Also, no significant difference was found in the axial fit among the anterior group (138.3 ±52.5 μm), the premolar group (132.9 ±50.4 μm), and the molar group (134.4 ±52.5 μm) (P>.05). The anterior group (267.6 ±110.2 μm) did not differ from the premolar group (270.2 ±112.8 μm) and the molar group (268.6 ±110.5 μm) in occlusal fit (P>.05). The marginal fit of SLM Co-Cr metal ceramic crowns was similar to that of the cast Au-Pt metal ceramic crowns and was better than that of the cast Co-Cr metal ceramic crowns. The SLM Co-Cr metal ceramic crowns were not significantly different from the 2 cast metal ceramic crowns in axial

  5. Student-Led Engagement of Journal Article Authors in the Classroom Using Web-Based Videoconferencing

    Science.gov (United States)

    Stockman, Brian J.

    2015-01-01

    The learning environment described here uses Web-based videoconferencing technology to merge the traditional classroom journal article discussion with student-led interviews of journal article authors. Papers that describe recent applications of a given technique are selected, with the author engagement occurring at the end of a three or four week…

  6. Media debates and 'ethical publicity' on social sex selection through preimplantation genetic diagnosis (PGD) technology in Australia.

    Science.gov (United States)

    Whittaker, Andrea

    2015-01-01

    This paper offers a critical discourse analysis of media debate over social sex selection in the Australian media from 2008 to 2014. This period coincides with a review of the National Health and Medical Research Council's Ethical Guidelines on the Use of Assisted Reproductive Technology in Clinical Practice and Research (2007), which underlie the regulation of assisted reproductive clinics and practice in Australia. I examine the discussion of the ethics of pre-implatation genetic diagnosis (PGD) within the media as 'ethical publicity' to the lay public. Sex selection through PGD is both exemplary of and interconnected with a range of debates in Australia about the legitimacy of certain reproductive choices and the extent to which procreative liberties should be restricted. Major themes emerging from media reports on PGD sex selection in Australia are described. These include: the spectre of science out of control; ramifications for the contestation over the public funding of abortion in Australia; private choices versus public authorities regulating reproduction; and the ethics of travelling overseas for the technology. It is concluded that within Australia, the issue of PGD sex selection is framed in terms of questions of individual freedom against the principle of sex discrimination - a principle enshrined in legislation - and a commitment to publically-funded medical care.

  7. Technological Capability Upgrading and Entrepreneurship: Case Study of Selected Indonesian Fish Processing Companies

    Directory of Open Access Journals (Sweden)

    Erman Aminullah

    2016-07-01

    Full Text Available This study analyzes the technological capability upgrading and entrepreneurship in the Indonesian fish processing industry. The analysis viewed from the Sectoral Innovation System (SIS focuses on two aspects: the enabling factors for innovation, and the role of entrepreneur in technological capability upgrading. The study finds that Indonesian fish processing companies: (i are less interactive with local universities or other STI (science, technology and innovation centers, and innovation was mostly done through learning by DUI (doing, using and interacting; (ii are characterized as low-tech industries with a high standard for food safety and product differentiation; (iii apply adaptive innovation, modified from existing technology or knowledge, except for the leading companies who apply innovation for new products in the market; (iv actors, technology, market trends, and networks are the main enabling factors for innovation; and (v the role of entrepreneurs – especially in building entrepreneurial networks – were dominant in the leading companies. The entrepreneurial networks exist and work in global distribution chains that are widely adopted by companies to export their products through buyer–producer relationships. The pathways toward export markets are: global born directly, fastly learned global, and delay learned global companies. These categories have enriched the Mets category (2012. The policy implications of the findings for government should: (i facilitate companies’ interaction with local universities or other STI centers; and (ii encourage domestic companies to improve their competitiveness by shifting to higher added value products through various innovations and trading policy schemes.

  8. Technological innovation of induced breeding of space and selection of new variety on pepper

    International Nuclear Information System (INIS)

    Guo Yahua; Xie Libo; Wang Xue; Deng Liping

    2004-01-01

    New pepper variety Yujiao No.1 and new pepper lines with different horticultural characters are obtained by new breeding technique: combination of space inducement and regular breeding, field selection and inherited marker

  9. Selected bibliography: cost and energy savings of conservation and renewable energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-05-01

    This bibliography is a compilation of reports on the cost and energy savings of conservation and renewable energy applications throughout the United States. It is part of an overall effort to inform utilities of technological developments in conservation and renewable energy technologies and so aid utilities in their planning process to determine the most effective and economic combination of capital investments to meet customer needs. Department of Energy assessments of the applications, current costs and cost goals for the various technologies included in this bibliography are presented. These assessments are based on analyses performed by or for the respective DOE Program Offices. The results are sensitive to a number of variables and assumptions; however, the estimates presented are considered representative. These assessments are presented, followed by some conclusions regarding the potential role of the conservation and renewable energy alternative. The approach used to classify the bibliographic citations and abstracts is outlined.

  10. Decision Analysis Science Modeling for Application and Fielding Selection Applied to Equipment Dismantlement Technologies. Topical Report January 1998

    International Nuclear Information System (INIS)

    Ebadian, M.A.

    1998-01-01

    The dismantlement of radioactively contaminated process equipment is a major concern during the D and D process. As buildings undergo the D and D process, metallic equipment contaminated with radionuclides such as uranium and plutonium must be dismantled before final disposal.The primary objective for equipment dismantlement is to reduce the potential for personnel and environmental exposure to contaminants during the decommissioning of the nuclear facility. The selection of the appropriate technologies to meet the dismantlement objectives for a given site is a difficult process in the absence of comprehensive and comparable data. Choosing the wrong technology could result in increased exposure of personnel to contaminants and an increase in D and D project costs. Innovative technologies are being developed with the goal of providing safer and more cost-effective alternatives that generate less secondary waste, thereby decreasing the operating costs for dismantlement. During the development and implementation process, performance indicators for the success of these technologies must be reviewed to ensure that these aims are being met. This project provides a mechanism for the assessment of innovative and commercially available nuclear and non-nuclear technologies for equipment dismantlement

  11. Article and process for producing an article

    Science.gov (United States)

    Lacy, Benjamin Paul; Jacala, Ariel Caesar Prepena; Kottilingam, Srikanth Chandrudu; Schick, David Edward

    2017-10-24

    An article and a process of producing an article are provided. The article includes a base material, a cooling feature arrangement positioned on the base material, the cooling feature arrangement including an additive-structured material, and a cover material. The cooling feature arrangement is between the base material and the cover material. The process of producing the article includes manufacturing a cooling feature arrangement by an additive manufacturing technique, and then positioning the cooling feature arrangement between a base material and a cover material.

  12. 75 FR 76397 - Effectiveness of Federal Agency Participation in Standardization in Select Technology Sectors for...

    Science.gov (United States)

    2010-12-08

    ..., understood and implemented for continuous process improvement. Such improvements can help ensure that Federal... constraints impact the successful completion of the standards efforts? Process Review and Improvement Metrics... Technology Transfer and Advancement Act of 1995 \\1\\ and the Office of Management and Budget Circular A-119.\\2...

  13. Investigation of greenhouse gas reduction potential and change in technological selection in Indian power sector

    International Nuclear Information System (INIS)

    Mathur, Jyotirmay; Bansal, Narendra Kumar; Wagner, H.-J.

    2003-01-01

    Due to the growing energy needs along with increasing concerns towards control of greenhouse gas emissions, most developing countries are under pressure to find alternative methods for energy conversion and policies to make these technologies economically viable. One of the instruments that have been adopted by many industrial countries is that of the carbon tax. The rate of introducing carbon taxes however, depends upon the local economic conditions and market forces. The case of Indian power sector has been examined by using MARKAL model for introduction of carbon taxes at four different trajectories. Their implications on the power generation choices have been investigated for a time span of 25 years from the year 2000. In general large hydropower plants have emerged as the first choice followed by wind energy systems. However, cheaper availability of coal in India keeps scope of use of coal based technologies for which pressurised fluidised bed combustion technology has been found to be the balanced choice among fossil technologies. There exists a potential of reduction of greenhouse gas emissions by about 25% as compared to the 'business-as-usual' case in presence of high carbon tax rates

  14. Integrating environmental impact assessment into new product development and processing-technology selection

    NARCIS (Netherlands)

    Depping, Verena; Grunow, Martin; Middelaar, van Corina; Dumpler, Joseph

    2017-01-01

    Environmental-impact reduction potential is great early in new product development. To exploit this potential, this study evaluates novel combinations of existent processing technologies. Process engineering is combined with an environmental product assessment along the supply chain. In the dairy

  15. Energy and environmentally appropriate technologies: a selectively annotated bibliography. Council of Planning Librarians exchange bibliography 1126

    Energy Technology Data Exchange (ETDEWEB)

    Piasetzki, J.P.

    1976-09-01

    The bibliography contains readings to provide assistance to those interested in environmentally appropriate technologies, with specific emphasis on energy producing equipment. A general listing with approximately 225 citations, a listing of 9 periodicals, a list of 6 information sources, and a list of 3 information publications are included. (MCW)

  16. A technical selection of suitable agricultural products for the application of radurisation technology

    International Nuclear Information System (INIS)

    Hill, N.D.

    1989-01-01

    The commercial utilization of radurization technology has not reached the levels expected due, predominantly, to two contributing factors. Over and above the suspicions held by the consumer towards food radurization, a dearth of information exists regarding the costs of applying this technology. It appears, therefore, that if the question of consumer acceptance is surmounted, an indication of benefit costs would be crucial to convincing potential radurization users whether or not this technology can provide any economic benefit. The range of food and agricultural products consumed in South Africa is very diverse. To determine the radurization benefit cost of each food product consumed in South Africa would, therefore, be a monumental task. As a result an investigation was commissioned by the Study Group for the Techno-Economic Aspects of the Steering Committee for the Marketing of Radurized Food Products. This investigation was aimed, in the first instance, at identifying those food and agricultural products best suited for the application of this technology, thereby creating a short list on which detailed benefit cost analyses could be performed

  17. Selecting, Managing, and Marketing Technologies. The Practicing Administrator's Leadership Series. Roadmaps to Success.

    Science.gov (United States)

    Mckenzie, Jamieson A.

    This book argues for a comprehensive approach to planning for and managing the use of technology in schools. In the first four chapters, emphasis is placed on the importance of: (1) anticipating the future; (2) creating stakeholders' planning committees; (3) providing staff development and training for teachers and administrators; (4) winning…

  18. Enterprise Model for Vendor Development: A Study at Selected Technology Park

    Directory of Open Access Journals (Sweden)

    Abdul Aziz Ab. Latif

    2012-01-01

    Full Text Available The study addresses the issues of skills enhancement that need be implemented in three distinct phases of enterprise development. Phase I is the developmental phase where potential entrepreneurs are provided with skills needed for venture take-off or start-up. Phase II is the enterprise creation phase while Phase III is the market development phase. This paper also discusses the multiple roles of the Techno Center during each of these distinct phases. Based on the analysis, the study found that there are gaps across industrial sub-sectors in term of various skills needed to create sustainable enterprise and entrepreneur development. Those gaps are cognitive, interpersonal, technical, creativity, computation, communication, intrapersonal, conceptual, managerial, analytical, technological, acoustic, design, self-management, innovative, basic managerial, supervisory, and marketing. The Techno Centre Enterprise Development Model highlights the central and multiple roles required of The Techno Centre in order to effectively provide support and services during various phases of enterprise development. The services include skill development, networking and linkages services; technology transfer and consultancy services; advisory services; and after-care services have different contents at different stages of the enterprise development.Key words: technology park, sustainable enterprise, technology transfer

  19. Article and method of forming an article

    Science.gov (United States)

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Dutta, Sandip; Schick, David Edward

    2017-12-26

    Provided are an article and a method of forming an article. The method includes providing a metallic powder, heating the metallic powder to a temperature sufficient to joint at least a portion of the metallic powder to form an initial layer, sequentially forming additional layers in a build direction by providing a distributed layer of the metallic powder over the initial layer and heating the distributed layer of the metallic powder, repeating the steps of sequentially forming the additional layers in the build direction to form a portion of the article having a hollow space formed in the build direction, and forming an overhang feature extending into the hollow space. The article includes an article formed by the method described herein.

  20. Cost/benefit analysis for selected waste minimization technologies at TA-55

    International Nuclear Information System (INIS)

    Boerigter, S.T.

    1996-01-01

    The TA-55 plutonium facility at LANL is one of the remaining plutonium-handling facilities in the United States with significant operational capability. In recent years a great deal of attention has been focused on the waste streams generated by this facility. Costs of properly treating these streams have risen significantly. This paper discusses the characterization of several proposed radioactive waste minimization technologies as a function of Return on Investment (ROI). In particular, the DOE Environmental Management program has identified a specific funding channel for such technology development activities, but this funding channel requires a restrictive definition of ROI. Here, a simple extension to the required ROI equation is used to capture the lifecycle ROI due to offsets in future capital charges resulting from present spending

  1. Effect of selected method of meat technological treatment on selenium content in mutton

    International Nuclear Information System (INIS)

    Nowosad, R.; Simoni, J.; Tyszkiewicz, B.

    1977-01-01

    Measurements were carried out of a radioisotope 75 Se content in mutton meat exposed to some technological treatments (soaking in tap water for 24 hours, pickling for 14 days, boiling for 1 hour) and to 24-hour soaking in 1% solutions of some organic acids used for alimentary purposes (lactic acid, citric acid, and acetic acid). The lowest decrease of radioactivity (11,69%) was noted following 24-hour soaking in tap water while the highest loss of selenium (41,69%) was measured after 24-hour soaking of granulated meat in 1% solution of lactic acid. The application of the same technological measures to the homogeneous force-meat resulted in higher loss of radioselenium in samples under test. The lowest decrease of radioactivity (19.19%) was observed following 1-hour boiling while the highest loss of selenium (60.81%) was measured after 24-hour soaking in 1% soaking in 1% solution of lactic acid. (author)

  2. Sulfur technology update: selected research topics from the ASRL core research program

    Energy Technology Data Exchange (ETDEWEB)

    Clark, P. D.; Dowling, N. I.; Marriott, R.A.; Primak, A.; Davis, P.M. [Alberta Sulphur Research Ltd (Canada)

    2011-07-01

    This conference presentation is a combined effort by Alberta Sulfur Research, Ltd (ASRL) and the University of Calgary; it focuses on sulfur production technology and the ongoing research behind it. This presentation deals mainly with the use of sulfur in the oil sand industry, sulfur recovery in Claus systems, and sulfur management issues. Sulfur formation, mainly in the form of hydrogen sulfide, and the use of liquid sulfur in bitumen coking in the petrochemical industries were discussed first. This was later followed by an illustration of how sulfur recovery efficiency is greatly enhanced by catalytic tail gas incineration and improved liquid sulfur degassing technologies. A comparative scheme between the current process and the new research in utilizing sulfur in nickel metal production was also presented, showing how the new research results in less waste. In conclusion, the effects of polymeric sulfur on the strength of the solid were discussed, showing a linear relationship between the two parameters.

  3. Innovative technology through selective laser sintering in mechatronics, biomedical engineering and industry

    Directory of Open Access Journals (Sweden)

    Gheorghe Ion GHEORGHE

    2011-03-01

    Full Text Available A new technology, using new materials specially designed for complex geometries,extensively used in research-development and innovation area will be presented in this paper. Evenhighly complex geometries are created directly from 3D CAD data, fully automatically, in just a fewhours and without any tooling. It is a net-shape process, producing parts with high accuracy anddetail resolution, good surface quality and excellent mechanical properties.

  4. A Database for Reviewing and Selecting Radioactive Waste Treatment Technologies and Vendors

    International Nuclear Information System (INIS)

    P. C. Marushia; W. E. Schwinkendorf

    1999-01-01

    Several attempts have been made in past years to collate and present waste management technologies and solutions to waste generators. These efforts have been manifested as reports, buyers' guides, and databases. While this information is helpful at the time it is assembled, the principal weakness is maintaining the timeliness and accuracy of the information over time. In many cases, updates have to be published or developed as soon as the product is disseminated. The recently developed National Low-Level Waste Management Program's Technologies Database is a vendor-updated Internet based database designed to overcome this problem. The National Low-Level Waste Management Program's Technologies Database contains information about waste types, treatment technologies, and vendor information. Information is presented about waste types, typical treatments, and the vendors who provide those treatment methods. The vendors who provide services update their own contact information, their treatment processes, and the types of wastes for which their treatment process is applicable. This information is queriable by a generator of low-level or mixed low-level radioactive waste who is seeking information on waste treatment methods and the vendors who provide them. Timeliness of the information in the database is assured using time clocks and automated messaging to remind featured vendors to keep their information current. Failure to keep the entries current results in a vendor being warned and then ultimately dropped from the database. This assures that the user is dealing with the most current information available and the vendors who are active in reaching and serving their market

  5. Initial Selection of Supplemental Treatment Technologies for Hanford's Low-Activity Tank Waste

    International Nuclear Information System (INIS)

    Raymond, Richard E.; Powell, Roger W.; Hamilton, Dennis W.; Kitchen, William A.; Mauss, Billie M.; Brouns, Thomas M.

    2004-01-01

    In 2002, the U.S. Department of Energy (DOE) documented a plan for accelerating cleanup of the Hanford Site, located in southeastern Washington State, by at least 35 years (DOE 2002). A key element of the accelerated cleanup plan was a strategic initiative for acceleration of the tank waste program and completion of ''tank waste treatment by 2028 by increasing the capacity of the planned Waste Treatment Plant (ETP) and using supplemental technologies for waste treatment and immobilization''. The plan identified specific technologies to be evaluated for supplemental treatment of as much as 70% of the low-activity waste (LAW). The objective was to complete required testing and evaluation that would ''...bring an appropriate combination of the above technologies to deployment to supplement LAW treatment and immobilization in the WTP to achieve the completion of tank waste treatment by 2028''. In concert with this acceleration plan, DOE, the U.S. Environmental Protection Agency, and the Washington State Department of Ecology have proposed to accelerate from 2012 to 2005 the Hanford Federal Facility Compliance Agreement (Tri-Party Agreement) milestone (M-62-08) associated with a final decision on treatment of the balance of tank waste that is beyond the capacity of the currently designed WTP

  6. Technical and Economic Forecast in Selection of Optimum Biomass and Local Fossil Fuel Application Technology for Thermal Electric Energy Generation

    Directory of Open Access Journals (Sweden)

    I. A. Bokun

    2010-01-01

    Full Text Available The paper provides a technical and economic analysis pertaining to selection of optimum biomass and local fossil fuel application technology for thermal electric energy generation while using a matrix of costs and a method of minimum value. Calculation results give grounds to assert that it is expedient to burn in the boiling layer – 69 % and 31 % of wood pellets and wastes, respectively and 54 % of peat and 46 % of slate stones. A steam and gas unit (SGU can fully operate on peat. Taking into account reorientation on decentralized power supply and increase of small power plants up to 3–5 MW the paper specifies variants of the most efficient technologies for burning biomass and local fossil fuels. 

  7. A Sensor-based System for Monitoring Hard-shoulder Incursions: Review of Technologies and Selection Criteria

    Directory of Open Access Journals (Sweden)

    Michalaki Paraskevi

    2016-01-01

    Full Text Available According to safety observations from motorway operators in the United Kingdom, the hard-shoulder is occasionally violated by road users travelling in the nearside lane. These unintentional movements (hard-shoulder incursions can impose risk to operatives performing activities on the network. To further investigate these events, a sensor-based system can be used for monitoring them and collecting related data such as severity of incursion and vehicle classification. A review of vehicle detection technologies that could be applied for this purpose is presented, along with the criteria for selection of the most suitable technology and implementation sites. Two potential non-intrusive systems are also described, a laser- and a radar-based systems, which provide different levels of flexibility and data.

  8. Relationship between Power Factors of Mixer Drive and Selected Technological Parameters

    OpenAIRE

    R. Wrona; E. Ziółkowski; K. Smyksy

    2008-01-01

    Thc paper summarizes the selected results of tcsts pcrforrncd to find thc relationship bctwcca thc tcchnological and operational paramctcrsand power consumption by a mixcr drivc. Major tcchnological pammetcrs of moulding sand to considcr arc: mixing lime. moisturecontent. pan load. EIectric power demand is cxprcsscd by crfcctivc valucs, assuming thc bnlanccd tod. Thc propcrtics of moulding sandare shown to be correlated with pwcr factors. As thc mixing lcvcts changc, thc tcchnologicnl pararna...

  9. Pomological and technological characteristics of collected selections of cherry plum Prunus cerasifera Erhr.

    Directory of Open Access Journals (Sweden)

    Miletić Rade

    2005-01-01

    Full Text Available A plantation collection containing 32 genotypes selected from spontaneous populations of cherry plum Prunus cerasifera Erhr. was set up in the region of the Eastern Serbian town of Svrljig. The fruit trees budded from Prunus cerasifera seedlings and were planted at 5x4 m spacing on a mild slope of south-western aspect. This study shows the most important characteristics of the 19 selections in the collection, and the average results recorded in the 2000-2003 period. The most significant characteristics of the trees, their productivity, and fruit and stone characteristics are presented. The average coarseness of fruits, i.e. their length, width and thickness, measured 25.0x 24.4x25.0 mm, while stone coarseness was 14.4x10.3x3.6 mm. The average fruit weight was 12.1 g (24.3-4.8 g, and stone weight 0.85 g (2.2-0.3 g. Depending on fruit and stone weight, the mesocarp content was 93% (96.3-90.3%. Taking into consideration the possibility of fruit exploitation for the production of biologically high-quality food, the mesocarp chemical composition was thoroughly examined. The fruits were found to have increased contents of total acids, achieving an average of 3.09% (3.44-2.60%, which was the initial objective of this selection. Total solids content was 13.5% (16.2-10.3%, total soluble solids 12.5% (14.5-9.5% and total sugars 6.00% (11.45-3.14%. Considering these characteristics, the selections that were singled out deserve more attention in terms of preserving their biodiversity, forming a gene bank and commercial cultivation.

  10. ORIGINAL ARTICLES Assisted reproductive technology in South ...

    African Journals Online (AJOL)

    It was anticipated that these data could be provided by most of the SARA participating units. In the second step, a software programme was developed in collaboration with the RLA for future online reporting of more extended data. In March 2010 a first call for data was sent to 16 South African. ART physicians and units.

  11. Gender differences in technology acceptance in selected South African companies: Implications for electronic learning

    Directory of Open Access Journals (Sweden)

    Willie T. Chinyamurindi

    2010-11-01

    Research: The objective of this study was to investigate trainees’ acceptance of electronic coursework as an instruction and learning technique in various industries in the South African context. Motivation for the study: A persistent gender imbalance in the South African work-place has been noted to exist chiefly in the Science, Engineering and Technology (SET sectors, areas that have an important bearing on South Africa’s global competitiveness. This study explores how gender imbalance manifests in terms of trainee acceptance of electronic coursework. Research design, approach and method: A cross-sectional survey design was used. A survey was conducted amongst 191 employees in the SET sector. The measuring instrument used was the Technology Acceptance Instrument (TAI and included measures of Computer Self-Efficacy (CSE, Perceived Ease of Use (PEU, Perceived Usefulness (PU and Behavioural Intention to Use (BI. Main findings: Women ratings of the TAI to use the electronic coursework were slightly higher than men’s ratings. Multiple regression analyses were also carried out to measure the variation in the level of influence with gender as a predictor variable. The results showed that compared to women, men had a lower salient effect of elements of the TAI, notably, CSE–PU; PU–BI and BI–PEU. However, compared to men, women had a higher salient effect in terms of the relationship between CSE–PU and PU–PEU. Practical implications: The implication of the results is that interventions that focus on the human resources development of employees using electronic coursework (namely, CSE, PEU, PU and BI are worth considering as they influence the acceptance of the interventions. Contribution/value-add: The study contributes to existing knowledge about the conditions that precede employee acceptance of an electronic coursework intervention within the South African context. The study shows the important role dimensions of the Technology Acceptance Instrument

  12. Application of past lessons in the dissemination of modern energy technologies in Africa: selected recent cases

    CSIR Research Space (South Africa)

    Mapako, M

    2009-04-01

    Full Text Available and Development Centre (MIRDC), a government technology development parastatal. The components of the stoves used with the briquettes were made by different groups including tinsmiths (cladding), potters (ceramic liner) and assemblers who assembled.... He was trained two months prior to the time of the visit and had sold 15 briquette stoves at MK550 each on a cash basis. He produced the tin cladding and purchased the ceramic liners at MK30-60 from women potters who had been trained by Do...

  13. Chemical composition and technological characteristics of wines from red grape varieties, selected in Bulgaria

    Directory of Open Access Journals (Sweden)

    V. Haygarov

    2017-03-01

    Full Text Available Abstract. Chemical analysis of grapes and technological characterization of wines from red varieties Storgoziya, Kaylashky rubin, Trapezitza, Rubin and Bouquet, created by the method of intraspecific and interspecific hybridization at the Institute of Viticulture and Enology – Pleven, Bulgaria were made. The technological maturity of the grapes as raw material for producing quality red wines was determined. Rubin variety was with the highest sugar content - 3 23.10±0.73 %, titratable acids - 6.18±0.34 g/dm and pH 3.40±0.71. The other varieties were with optimal condition for the production of red wines in terms of sugars and titratable acids. The chemical composition and organoleptic characteristics of the experimental wine samples were established. The ethyl alcohol content in the produced wines was in the range from 12.33±0.23 vol. % (Bouquet to 13.31±0.34 vol. % (Kaylashky rubin. The content of titratable acids was in 3 3 the range of 5.33±0.43 g/dm (Trapezitza up to 6.88±0.21 g/dm (Kaylashky rubin. There were no significant differences in the analyzed indicators and taste evaluation between experimental wines and wine of Vitis vinifera – Pinot noir grape variety used as control sample

  14. Publishing International Counseling Articles

    Science.gov (United States)

    Hohenshil, Thomas H.; Amundson, Norman E.

    2011-01-01

    This article begins with a rationale for including international articles in the "Journal of Counseling & Development." Then, 2 general categories of international articles are described. First are articles that provide a general overview of counseling in a particular country. The 2nd category is more general and might involve international…

  15. Performance evaluation of reverse osmosis technology for selected antibiotics removal from synthetic pharmaceutical wastewater

    Directory of Open Access Journals (Sweden)

    Gholami Mitra

    2012-12-01

    Full Text Available Abstract This study addresses the possibility for low pressure reverse osmosis membrane (RE 2521, CSM process to serve as an alternative to remove selected antibiotics (ampicillin and amoxicillin from synthetic wastewater by changing operating conditions such as pH = 3, 6.5 and 10; Pressure = 9, 11 and13 (bar; antibiotic concentration = 10, 255 and 500(mg/L, and temperature = 20, 30 and 40°C. The experiment was designed based on Box-benken, which is a Response Surface methodology design (RSM, using Design Expert software. The concentration of antibiotics was measured by applying a UV-spectrophotometer (Cecil, at the wavelength of 254 nm. Results showed a range of rejection percentage from 73.52% to 99.36% and 75.1% to 98.8%, for amoxicillin and ampicillin, respectively. Considering the solute rejections and the membrane porosity show that the prevailing rejection mechanism of the examined antibiotics by the membrane was the size exclusion effect. The permeate flux for both of the antibiotics was 12–18.73 L/m2.h. Although the permeate flux and antibiotic rejection are influenced by operating pressure, pH, and temperature individually, the interaction between operating parameters did not have noticeable effects. According to the results obtained in this study, the application of RO membrane is recommended for the selected antibiotics to be removed to a considerable degree (up to 95%.

  16. Selected case studies of technology transfer from mission-oriented applied research

    Energy Technology Data Exchange (ETDEWEB)

    Daellenbach, K.K.; Watts, R.L.; Young, J.K. [Pacific Northwest Lab., Richland, WA (United States); Abarcar, R.B. [Energetics, Inc., Columbia, MD (United States)

    1992-07-01

    The US Department of Energy (DOE) Advanced Industrial Concepts Division (AICD) under the Office of Industrial Technologies (OIT) supports interdisciplinary applied research and exploratory development that will expand the knowledge base to enable industry to improve its energy efficiency and its capability to use alternative energy resources. AICD capitalizes on scientific and technical advances from the United States and abroad, applying them to address critical technical needs of American industry. As a result, AICD research and development products are many and varied, and the effective transfer of these products to diverse targeted users requires different strategies as well. This paper describes the products of AICD research, how they are transferred to potential users, and how actual transfer is determined.

  17. Historic Buildings of the Warsaw University of Technology - Selected Issues of Renovation, Modernisation and Adaptation

    Directory of Open Access Journals (Sweden)

    Wagner Anna Agata

    2016-06-01

    Full Text Available The historic buildings of the Warsaw University of Technology display not only outstanding architectural values, but are also representative of the trends in preservation, restoration, and adaptation that were prevalent at the time of their modernization. The post-war rebuilding of the WUT was more akin to modernization than reconstruction. But the freedom to shape modern architectural forms in the 1960s and ’70s brought with it a lack of respect for their historic environment. A change in the approach to historic buildings and their integration with modern architecture came in the late 1970s. The most recent modernization of the WUT’s historic buildings, especially after Poland’s accession to the EU, resulted in many good examples of proper, harmonious integration between the ‘modern’ and the ‘traditional’.

  18. Historic Buildings of the Warsaw University of Technology - Selected Issues of Renovation, Modernisation and Adaptation

    Science.gov (United States)

    Wagner, Anna Agata

    2016-06-01

    The historic buildings of the Warsaw University of Technology display not only outstanding architectural values, but are also representative of the trends in preservation, restoration, and adaptation that were prevalent at the time of their modernization. The post-war rebuilding of the WUT was more akin to modernization than reconstruction. But the freedom to shape modern architectural forms in the 1960s and '70s brought with it a lack of respect for their historic environment. A change in the approach to historic buildings and their integration with modern architecture came in the late 1970s. The most recent modernization of the WUT's historic buildings, especially after Poland's accession to the EU, resulted in many good examples of proper, harmonious integration between the `modern' and the `traditional'.

  19. Selecting the Parameters of the Orientation Engine for a Technological Spacecraft

    Science.gov (United States)

    Belousov, A. I.; Sedelnikov, A. V.

    2018-01-01

    This work provides a solution to the issues of providing favorable conditions for carrying out gravitationally sensitive technological processes on board a spacecraft. It is noted that an important role is played by the optimal choice of the orientation system of the spacecraft and the main parameters of the propulsion system as the most important executive organ of the system of orientation and control of the orbital motion of the spacecraft. Advantages and disadvantages of two different orientation systems are considered. One of them assumes the periodic impulsive inclusion of a low thrust liquid rocket engines, the other is based on the continuous operation of the executing elements. A conclusion is drawn on the need to take into account the composition of gravitationally sensitive processes when choosing the orientation system of the spacecraft.

  20. Earth System Monitoring Selected Entries from the Encyclopedia of Sustainability Science and Technology

    CERN Document Server

    2013-01-01

    Modern Earth System Monitoring represents a fundamental change in the way scientists study the Earth System.  In Oceanography, for the past two centuries, ships have provided the platforms for observing.  Expeditions on the continents and Earth’s poles are land-based analogues. Fundamental understanding of current systems, climate, natural hazards, and ecosystems has been greatly advanced. While these approaches have been remarkably successful, the need to establish measurements over time can only be made using Earth observations and observatories with exacting standards and continuous data.  The 19 peer-reviewed contributions in this volume provide early insights into this emerging view of Earth in both space and time in which change is a critical component of our growing understanding. Presents 19 authoritative, peer-reviewed entries from the Encyclopedia of Sustainability Science and Technology Covers a wide range of data collection platforms, including satellite remote sensing, aerial surveys, and l...

  1. Radioanalytical technology for 10 CFR Part 61 and other selected radionuclides: Literature review

    International Nuclear Information System (INIS)

    Thomas, C.W.; Thomas, V.W.; Robertson, D.E.

    1996-03-01

    A comprehensive literature review and assessment was conducted to identify and evaluate radioanalytical technology and procedures used for measuring 10CFR61 radionuclides and other long-lived isotopes. This review evaluated radiochemical procedures currently in use at a number of laboratories in the US, as well as identifying new advanced methods and techniques which could be adapted for routine radiochemical analyses of low-level radioactive waste. The 10CFR61 radionuclides include 14 C, 60 Cl, 59,63 Ni, 90 Sr, 94 Nb, 99 Tc, 129 I, 137 Cs, and TRU isotopes with half lives greater than 5 years. Other low-level radionuclides of interest include 7,10 Be, 26 Al, 36 Cl, 93 Mo, 109,113m Cd, and 121m,126 Sn, which may be present in various types of waste streams from nuclear power stations

  2. Fate of selected pathogens in spiked «SALAME NOSTRANO» produced without added nitrates following the application of NONIT™ technology.

    Science.gov (United States)

    Cenci-Goga, B T; Karama, M; Sechi, P; Iulietto, M F; Grispoldi, L; Selvaggini, R; Ceccarelli, M; Barbera, S

    2018-02-14

    This study evaluated the effect of a novel formulation for starter culture associated with specific ripening conditions (NoNit™ technology) vs. a commercial» starter on the fate of selected pathogens and hygiene indicators during the fermentation and ripening of experimentally spiked salame nostrano (Italian dry sausage). Selected strains of Staphylococcus aureus 27R, Escherichia coli CSH26 K 12, Listeria innocua ATCC 33090 and Salmonella Derby 27 were inoculated into salami batter and challenged with two formulations of starter cultures (a commercial formulation and the NoNit™ formulation, consisting of Lactococcus lactis ssp. lactis, strain 340; L. lactis ssp. lactis, strain 16; Lactobacillus casei ssp. casei, strain 208 and Enterococcus faecium strain 614) with ripening at a low temperature. The proposed technology (NoNit™) performed better than the commercial formulation and limited the growth of spiked Escherichia coli, Staphylococcus aureus (including the production of enterotoxin), Salmonella Derby and Listeria innocua, yet maintained the basic product appearance and texture. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Recovery of Cobalt as Cobalt Oxalate from Cobalt Tailings Using Moderately Thermophilic Bioleaching Technology and Selective Sequential Extraction

    Directory of Open Access Journals (Sweden)

    Guobao Chen

    2016-07-01

    Full Text Available Cobalt is a very important metal which is widely applied in various critical areas, however, it is difficult to recover cobalt from minerals since there is a lack of independent cobalt deposits in nature. This work is to provide a complete process to recover cobalt from cobalt tailings using the moderately thermophilic bioleaching technology and selective sequential extraction. It is found that 96.51% Co and 26.32% Cu were extracted after bioleaching for four days at 10% pulp density. The mean compositions of the leach solutions contain 0.98 g·L−1 of Co, 6.52 g·L−1 of Cu, and 24.57 g·L−1 of Fe (III. The copper ion was then recovered by a solvent extraction process and the ferric ions were selectively removed by applying a goethite deironization process. The technological conditions of the above purification procedures were deliberately discussed. Over 98.6% of copper and 99.9% of ferric ions were eliminated from the leaching liquor. Cobalt was finally produced as cobalt oxalate and its overall recovery during the whole process was greater than 95%. The present bioleaching process of cobalt is worth using for reference to deal with low-grade cobalt ores.

  4. Article and method for making an article

    Energy Technology Data Exchange (ETDEWEB)

    Lacy, Benjamin Paul; Schick, David Edward; Kottilingam, Srikanth Chandrudu

    2018-04-03

    An article and a method for making shaped cooling holes in an article are provided. The method includes the steps of depositing a metal alloy powder to form an initial layer including at least one aperture, melting the metal alloy powder with a focused energy source to transform the powder layer to a sheet of metal alloy, sequentially depositing an additional layer of the metal alloy powder to form a layer including at least one aperture corresponding to the at least one aperture in the initial layer, melting the additional layer of the metal alloy powder with the focused energy source to increase the sheet thickness, and repeating the steps of sequentially depositing and melting the additional layers of metal alloy powder until a structure including at least one aperture having a predetermined profile is obtained. The structure is attached to a substrate to make the article.

  5. Article and method for making an article

    Energy Technology Data Exchange (ETDEWEB)

    Lacy, Benjamin Paul; Schick, David Edward; Kottilingam, Srikanth Chandrudu

    2018-04-03

    An article and a method for making shaped cooling holes in an article are provided. The method includes the steps of providing a metal alloy powder; forming an initial layer with the metal alloy powder, the initial layer having a preselected thickness and a preselected shape, the preselected shape including at least one aperture; sequentially forming an additional layer over the initial layer with the metal alloy powder, the additional layer having a second preselected thickness and a second preselected shape, the second preselected shape including at least one aperture corresponding to the at least one aperture in the initial layer; and joining the additional layer to the initial layer, forming a structure having a predetermined thickness, a predetermined shape, and at least one aperture having a predetermined profile. The structure is attached to a substrate to make the article.

  6. Research Article Special Issue

    African Journals Online (AJOL)

    2018-01-15

    Jan 15, 2018 ... technology changes resulted more advance technology applied in their daily learning process. An up to date ... of coursework to the users of i-Learn V3. 1.3.3. Technology Factor. The technology or information systems for this study were related to the accessibly of the ... Faculty of Hotel Management and.

  7. Selecting new health technologies for evaluation:Can clinical experts predict which new anticancer drugswill impact Danish health care?

    DEFF Research Database (Denmark)

    Douw, Karla; Vondeling, Hindrik

    2007-01-01

    Several countries have systems in place to support the managed entry of new health technologies. The big challenge for these so-called horizon-scanning systems is to select those technologies that require decision support by means of an early evaluation. Clinical experts are considered a valuable...... source of information on new health technologies, but research on the relevance of their input is scarce. In 2000, we asked six Danish expert oncologists to predict whether a sample of 19 new anticancer drugs would impact Danish health care over the next 5 years. In 2005, we assessed the accuracy...... of these predictions in a delayed type cross-sectional study. The specificity of the Danish experts' prediction was 1 (95% confidence interval 0.74-1.00) and the sensitivity was 0.63 (0.31-0.86). The negative predictive value was 0.79 (0.52-0.92) and the positive predictive value was 1 (0.57-1.00). This indicates...

  8. Application of GRA method, dynamic analysis and fuzzy set theory in evaluation and selection of emergency treatment technology for large scale phenol spill incidents

    Science.gov (United States)

    Zhao, Jingjing; Yu, Lean; Li, Lian

    2017-05-01

    Select an appropriate technology in an emergency response is a very important issue with various kinds of chemical contingency spills frequently taking place. Due to the complexity, fuzziness and uncertainties of the chemical contingency spills, the theory of GRA method, dynamic analysis combined with fuzzy set theory will be appropriately applied to selection and evaluation of emergency treatment technology. Finally, a emergency phenol spill accidence occurred in highway is provided to illustrate the applicability and feasibility of the proposed methods.

  9. Technological properties of Lactobacillus fermentum involved in the processing of dolo and pito, West African sorghum beers, for the selection of starter cultures

    DEFF Research Database (Denmark)

    Sawadogo-Lingani, H.; Diawara, B.; Traoré, A.S.

    2008-01-01

    AIM: Technological properties of Lactobacillus fermentum isolates involved in spontaneous fermentation of dolo and pito wort were examined to select starter cultures. METHODS AND RESULTS: 264 isolates were screened for antimicrobial activity, acidifying activity, exopolysaccharides (EPSs) and amy......AIM: Technological properties of Lactobacillus fermentum isolates involved in spontaneous fermentation of dolo and pito wort were examined to select starter cultures. METHODS AND RESULTS: 264 isolates were screened for antimicrobial activity, acidifying activity, exopolysaccharides (EPSs...

  10. Comparative Study of Machining Technology Selection to Manufacture Large-Size Components of Offshore Constructions

    Directory of Open Access Journals (Sweden)

    Deja Mariusz

    2017-04-01

    Full Text Available The focus of this paper is on process planning for large parts manufacture in systems of definite process capabilities, involving the use of multi-axis machining centres. The analysis of machining heavy mechanical components used in off-shore constructions has been carried out. Setup concepts applied and operation sequences determined in related process plans underwent studies. The paper presents in particular a reasoning approach to setup sequencing and machine assignment in manufacturing large-size components of offshore constructions. The relevant reasoning mechanism within a decision making scheme on generated process plan is shown based on a case study derived from the offshore sector. Recommendations for manufacture of selected exemplary and typical parts were formulated.

  11. Reward preferences for generations in selected Information and Communication Technology companies

    Directory of Open Access Journals (Sweden)

    Annetjie Moore

    2012-01-01

    Full Text Available Orientation: Previous research suggests that different generations have different reward preferences based on differences in values, frames of reference and life goals. Research purpose: The focus of this study was to determine whether different generations prefer different rewards in the Information and Communication Technology (ICT industry in South Africa.Motivation for the study: The rationale for this study was to obtain a better understanding of the reward preferences of Veterans, Baby Boomers, Generation X and Generation Y in the ICT industry.Research design, approach and method: The research was a quantitative, cross-sectional, correlational design. Participants from two ICT companies completed a structured electronic survey. One hundred and sixty four valid responses were received. A Cronbach’s alpha of 0.821 indicates that the survey was reliable.Main findings: Contrary to previous research, the results show that generations do not display different reward preferences.Practical/managerial implications: It would be more beneficial to use individual interrelationship factors to develop a reward strategy than generations.Contribution/value-add: The research has added insight and value to reward preferences for generations in the ICT sector.

  12. Politicking information technology strategy in organisations: A case study of a selected organisation in South Africa

    Directory of Open Access Journals (Sweden)

    Michael Twum-Darko

    2015-06-01

    Full Text Available The paper discusses the impact of organisational polities on IT strategy formulation and implementation in an organisation. The objective is to determine the extent of organisational polities on strategy implementation in an organisation. The paper considered the interplay between stakeholders in influencing IT strategy formulation and implementation in an organisation as a socially constructed phenomenon. Thus, the phenomenon can be interpreted and understood by using social theories such Structuration Theory. Hence the paper adopted ANT as a lens through which to understand and interpret the sociotechnical processes associated with IT strategy formulation and implementation in an organisation. Through IT strategy, many organisations attempt to set out key directions and objectives for the use and management of information, communication and technologies. A shared view among these organisations is that IT strategy allows all parts of the organisation to gain a shared understanding of priorities, goals and objectives for both current and future states as defined in the organisational strategy. It is therefore arguable that IT strategy, for the foreseeable future will remain a key aspect of development within organisations. As a result, there has been more focus on how IT strategy is formulated and articulated. What is missing though, is less attention to the implementation of it. Using interpretive research philosophy and employing semi-structured interviews as data collection instrument, this paper attempts to suggest a matrix that will assist organisation to comprehend and deal with organisational politics to reduce its negative impact on IT strategy formulation and implementation in an organisation

  13. Stent manufacturing using cobalt chromium molybdenum (CoCrMo) by selective laser melting technology

    Science.gov (United States)

    Omar, Mohd Asnawi; Baharudin, BT-HT; Sulaiman, S.

    2017-12-01

    This paper reviews the capabilities of additive manufacturing (AM) technology and the use of Cobalt super alloy stent fabrication by looking at the dimensional accuracy and mechanical properties of the stent. Current conventional process exhibit many processes which affect the supply chain, costing, and post processing. By alternatively switching to AM, the step of production can be minimized and thus customization of stent can be carried out according to patients need. The proposed methodology is a perfect choice as surgeons need to have an accurate size during stent implantation. It also is able to reduce time-to-market delivery in a matter of hours and from days. The suggested stent model was taken from the third party vendor and flow optimization was carried out using Materialise Magics TM software. By using SLM125TM printer, the printing parameters such as Energy Density (DE), Laser Power (PL), Scanning Speed (SS) and Hatching Distance (DH) was used to print the stent. The properties of the finished product, such as strength, surface finish and orientation was investigated.

  14. Capital cost estimates of selected advanced thermal energy storage technologies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, W.T.

    1980-06-01

    A method for evaluating the first cost of diverse advances TES concepts on a common basis is presented. For a total sample of at least 20 baseline and advanced TES technologies, the methodology developed was to be applied in the calculation of actual cost and performance measures. Work on the development of TES has focused on 5 types of application areas: electric power generation, with solar input in which TES is used to store energy for use during cloudy periods or at night; conventional fuel-fired electric power generation, in which TES is used to improve load factors; cyclic losses, in which TES is used to reduce losses that occur when devices start and stop; batch losses, in which TES is used to recover waste heat; and source/sink mismatch, in which TES is used to increase the efficiency of processes that are dependent upon ambient temperatures. Chapter 2 defines reference operating characteristics; Chapter 2 gives the costing methodology; Chapter 4 describes the system; Chapter 5 describes the baseline systems; Chapter 6 analyzes the effect of input-storage-temperature requirements on solar-collector-hardware costs and the input-temperature requirements of off-peak electric-storage systems on compressor operating costs; and in Chapter 7, the effects of chemical heat pump COP and collector temperature on storage size and collector area are considered. (MCW)

  15. Selective tuberculosis incidence estimation by digital computer information technologies in the MS Excel system

    Directory of Open Access Journals (Sweden)

    G. I. Ilnitsky

    2014-01-01

    Full Text Available The incidence of tuberculosis was estimated in different age groups of people, applying the digital computer information technologies of tracking. For this, the author used the annual forms of the reporting materials stipulated by the Ministry of Health of Ukraine, the results of his observations, and the data of bank information accumulation in the MS Excel system. The initial positions were formed in terms of the epidemiological indicators of Ukraine and the Lvov Region during a 10-year period (2000-2009 that was, in relation with different initial characteristics, divided into Step 1 (2000-2004 in which the tuberculosis epidemic situation progressively deteriorated and Step 2 (2005-2009 in which relative morbidity was relatively stabilized. The results were processed using the MS Excel statistical and mathematical functions that were parametric and nonparametric in establishing a correlation when estimating the changes in epidemic parameters. The findings of studies among the general population could lead to the conclusion that the mean tuberculosis morbidity in Ukraine was much greater than that in the Lvov Region irrespective of the age of a population. At the same time, the morbidity rate in the foci of tuberculosis infection suggested that it rose among both the children, adolescents, and adults, which provided a rationale for that therapeutic and preventive measures should be better implemented.

  16. New technologies from the bioworld: selection of biopolymer-producing microalgae

    Directory of Open Access Journals (Sweden)

    Roberta Guimarães Martins

    Full Text Available Abstract Microalgae are studied because of their biotechnological potential. The growth of microalgae aims at obtaining natural compounds. Due to the large amount of accumulated polymer waste, one of the solutions is the use of biodegradable polymers. The objective of this work was to select biopolymer-producing microalgae and to study the cell growth phase in which maximum production occurs. Microalgae Cyanobium sp., Nostoc ellipsosporum, Spirulina sp. LEB 18 and Synechococcus nidulans were studied. The growth was carried out in closed 2 L photobioreactors kept in a chamber thermostated at 30 °C with an illuminance of 41.6 μmolphotons.m-2.s-1 and a 12 h light/dark photoperiod. The biopolymers were extracted at times of 5, 10, 15, 20 and 25 d. The microalgae that had the highest yields were Nostoc ellipsosporum and Spirulina sp. LEB 18 with crude biopolymer efficiency of 19.27 and 20.62% in 10 and 15 d, respectively, at the maximum cell growth phase.

  17. InterTechnology Corporation report of solar energy systems installation costs for selected commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    The results of a study in which the primary objective was to determine actual costs associated with the installation of solar collector and thermal energy storage subsystems in specific non-residential building applications are presented. A secondary objective of the study was to assemble details of existing solar collector and storage subsystem installations, including caveats concerning cost estimating, logistics and installation practices. The study began with the development of an exhaustive listing and compilation of basic data and contacts for non-residential applications of solar heating and cooling of buildings. Both existing projects and those under construction were surveyed. Survey summary sheets for each project encountered are provided as a separate appendix. Subsequently, the rationale used to select the projects studied in-depth is presented. The results of each of the detailed studies are then provided along with survey summary sheets for each of the projects studied. Installation cost data are summarized and the significance of the differences and similarities between the reported projects is discussed. After evaluating the data obtained from the detailed studies, methods for reducing installation labor costs are postulated based on the experience of the study. Some of the methods include modularization of collectors, preplumbing and preinsulating, and collector placement procedures. Methods of cost reduction and a summary discussion of prominent problems encountered in the projects are considered.(WHK)

  18. [Technological and pharmacotherapeutic properties of selected drugs with modified release of diclofenac sodium].

    Science.gov (United States)

    Kołodziejczyk, Michał Krzysztof; Kołodziejska, Justyna; Zgoda, Marian Mikołaj

    2012-01-01

    Diclofenac and its sodium salt is one of the best-known and popular therapeutic agents from the group of NSAIDs used in medicine in many various pharmaceutical forms. Therapeutic products containing diclofenac sodium salt in doses of 100 mg and 75 mg with a qualitatively and quantitatively diversified share of excipients and a variable dosage form of the drug (solid capsules, tablets with modified release) were subjected to technological and pharmaceutical analysis. The effect of solid formulation components of polymer character making the core and the coating of the pharmaceutical form of therapeutic products on the disintegration time and pharmaceutical availability in pharmacopoeial receptor fluids was estimated. Market therapeutic products with diclofenac sodium in doses of 75 mg and 100 mg, technological analysis of the drug dosage form was conducted, disintegration time of solid oral dosage forms of the drug with diclofenac sodium salt was examined and research on pharmaceutical availability of diclofenac sodium salt from tested therapeutic products was conducted using the acid phase and the buffer phase according to the FP standards for delayed release enteral dosage forms. The experimental data was supplemented with the statistical analysis. There are three formulations in the form of solid capsules and one formulation in the form of a coated tablet. All therapeutic products bear features of a dosage form of modified release of diclofenac sodium salt, frequently of a delayed release formula in the duodenum or the small intestine with regard to the limitation of typical undesirable effects after taking NSAIDs. Considerable diversity between solid capsules and the tablet with modified release during disintegration or hydration and swelling has been observed. In the environment of a receptor fluid--purified water (pH = 7) the capsule Dicloberl retard disintegrates at the fastest rate in 5,49 minutes, and then in the order: DicloDuo 75 mg--8,13 minutes and

  19. State funding for health information technology and selected ambulatory healthcare quality measures.

    Science.gov (United States)

    Kern, L M; Silver, M; Kaushal, R

    2014-01-01

    Previous studies on the effects of health information technology (health IT) on ambulatory quality have had mixed results. New York State has invested heavily in health IT throughout the State, creating a unique opportunity to assess effects on health care quality across multiple communities. To determine any association between primary care providers' receipt of funding from New York State's Healthcare Efficiency and Affordability Law for New Yorkers Program (HEAL NY) and ambulatory quality of care. A statewide, longitudinal cohort study of primary care physicians in New York State was conducted. Data regarding which primary care physicians received funding through the HEAL NY program (Phase 5 or Phase 10) in 2008 or 2009 were obtained from the New York State Department of Health. Health care quality in 2010 was measured using claims data that had been aggregated across 7 commercial health plans across the state. Physicians were divided into 2 groups, based on receipt of HEAL funding (yes/no). Any association was measured between study group and each of 7 quality measures, all of which appear in the Stage 1 federal Meaningful Use program. Negative binomial regression was used, adjusting for provider gender and specialty. The study included 3,988 primary care providers, of whom 863 (22%) had received HEAL NY funding. The HEAL-funded physicians provided higher quality of care on 5 of the 7 measures: breast cancer screening, eye exams in patients with diabetes, nephropathy screening in patients with diabetes, influenza vaccination and pneumococcal vaccination (phealth IT provided higher quality of care than those who did not receive such funding.

  20. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-11-24

    . Self-medication may be one of the major consequences of drug advertising. Methodology: This review article was conducted through reviewing 100 articles and 12 books, derived from valid libraries and electronic sources.

  1. [Reading research articles].

    Science.gov (United States)

    van der Graaf, Yolanda; Zaat, Joost

    2015-01-01

    Keeping up with the latest developments is not easy, but neither is reading articles on research. There are too many medical journals that contain information that is irrelevant to clinical practice. From this mass of articles you have to decide which are important for your own clinical practice and which are not. Most articles naturally fall into the latter category as spectacular findings with important consequences for medical practice do not occur every week. The most important thing in a research article is the research question. If you begin with this, then you can put aside much scientific literature. The methodology section is essential; reading this can save you a lot of time. In this article we take you step-by-step through the process of reading research articles. The articles in our Methodology series can be used as background information. These articles have been combined in a tablet app, which is available via www.ntvg.nl/methodologie.

  2. Articles comprising ferritic stainless steels

    Science.gov (United States)

    Rakowski, James M.

    2016-06-28

    An article of manufacture comprises a ferritic stainless steel that includes a near-surface region depleted of silicon relative to a remainder of the ferritic stainless steel. The article has a reduced tendency to form an electrically resistive silica layer including silicon derived from the steel when the article is subjected to high temperature oxidizing conditions. The ferritic stainless steel is selected from the group comprising AISI Type 430 stainless steel, AISI Type 439 stainless steel, AISI Type 441 stainless steel, AISI Type 444 stainless steel, and E-BRITE.RTM. alloy, also known as UNS 44627 stainless steel. In certain embodiments, the article of manufacture is a fuel cell interconnect for a solid oxide fuel cell.

  3. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  4. New method for selection of hydrogen peroxide adapted bifidobacteria cells using continuous culture and immobilized cell technology

    Directory of Open Access Journals (Sweden)

    Meile Leo

    2010-07-01

    Full Text Available Abstract Background Oxidative stress can severely compromise viability of bifidobacteria. Exposure of Bifidobacterium cells to oxygen causes accumulation of reactive oxygen species, mainly hydrogen peroxide, leading to cell death. In this study, we tested the suitability of continuous culture under increasing selective pressure combined with immobilized cell technology for the selection of hydrogen peroxide adapted Bifidobacterium cells. Cells of B. longum NCC2705 were immobilized in gellan-xanthan gum gel beads and used to continuously ferment MRS medium containing increasing concentration of H2O2 from 0 to 130 ppm. Results At the beginning of the culture, high cell density of 1013 CFU per litre of reactor was tested. The continuous culture gradually adapted to increasing H2O2 concentrations. However, after increasing the H2O2 concentration to 130 ppm the OD of the culture decreased to 0. Full wash out was prevented by the immobilization of the cells in gel matrix. Hence after stopping the stress, it was possible to re-grow the cells that survived the highest lethal dose of H2O2 and to select two adapted colonies (HPR1 and HPR2 after plating of the culture effluent. In contrast to HPR1, HPR2 showed stable characteristics over at least 70 generations and exhibited also higher tolerance to O2 than non adapted wild type cells. Preliminary characterization of HPR2 was carried out by global genome expression profile analysis. Two genes coding for a protein with unknown function and possessing trans-membrane domains and an ABC-type transporter protein were overexpressed in HPR2 cells compared to wild type cells. Conclusions Our study showed that continuous culture with cell immobilization is a valid approach for selecting cells adapted to hydrogen peroxide. Elucidation of H2O2 adaptation mechanisms in HPR2 could be helpful to develop oxygen resistant bifidobacteria.

  5. Graphic products used in the evaluation of traditional and emerging remote sensing technologies for the detection of fugitive contamination at selected superfund hazardous waste sites

    Science.gov (United States)

    Slonecker, E. Terrence; Fisher, Gary B.

    2011-01-01

    This report presents the overhead imagery and field sampling results used to prepare U.S. Geological Survey Open-File Report 2011-1050, 'Evaluation of Traditional and Emerging Remote Sensing Technologies for the Detection of Fugitive Contamination at Selected Superfund Hazardous Waste Sites'. These graphic products were used in the evaluation of remote sensing technology in postclosure monitoring of hazardous waste sites and represent an ongoing research effort. Soil sampling results presented here were accomplished with field portable x-ray fluoresence (XRF) technology and are used as screening tools only representing the current conditions of metals and other contaminants at selected Superfund hazardous waste sites.

  6. Research Article Special Issue

    African Journals Online (AJOL)

    2016-07-19

    Jul 19, 2016 ... technology diffusion plan were extracted for small and medium businesses. Those are training programs ... experience or leads to new product, technic and activity. Technology enhancement ... on research and training or cooperate with bigger enterprises to attract new technologies and financial supports.

  7. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-10-17

    Oct 17, 2017 ... Metals Products. Euro Coke &. Energy Pvt. Ltd. Mining. 9. Forbes & Co. Ltd. Machinery. F A L Industries. Ltd. Consumer. Goods. 10 Kamat Hotels. Hotels ... Engineering Ltd. Machinery. 13 Mphasis Ltd. Information. Technology. Kshema. Technologies Ltd. Information. Technology. 14 H I L Ltd. Construction.

  8. An evaluation of remote sensing technologies for the detection of fugitive contamination at selected Superfund hazardous waste sites in Pennsylvania

    Science.gov (United States)

    Slonecker, E. Terrence; Fisher, Gary B.

    2014-01-01

    This evaluation was conducted to assess the potential for using both traditional remote sensing, such as aerial imagery, and emerging remote sensing technology, such as hyperspectral imaging, as tools for postclosure monitoring of selected hazardous waste sites. Sixteen deleted Superfund (SF) National Priorities List (NPL) sites in Pennsylvania were imaged with a Civil Air Patrol (CAP) Airborne Real-Time Cueing Hyperspectral Enhanced Reconnaissance (ARCHER) sensor between 2009 and 2012. Deleted sites are those sites that have been remediated and removed from the NPL. The imagery was processed to radiance and atmospherically corrected to relative reflectance with standard software routines using the Environment for Visualizing Imagery (ENVI, ITT–VIS, Boulder, Colorado) software. Standard routines for anomaly detection, endmember collection, vegetation stress, and spectral analysis were applied.

  9. DEVELOPMENT OF METHODS OF ESTIMATION, ANALYSIS, SUBSTANTIATION AND SELECTION OF ORGANIZATIONAL AND TECHNOLOGICAL DECISIONS FOR RECONSTRUCTION OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    SIEDIN V. L.

    2017-02-01

    Full Text Available Raising of problem. Over the past decade, changes in the economy have led to the decline of many industrial enterprises, which in turn led to the emergence of abandoned buildings and degraded areas that create a social and environmental hazard. Accordingly, the buildings and structures of such enterprises do not function and need reconstruction. Purpose of the aricle. Study of the development of methods for assessing, analyzing, substantiating and selecting rational organizational and technological decisions for the reconstruction of industrial enterprises. Conclusion. With the aim of transforming degraded and disordered territories into modern centers of vital activity, it is necessary to identify in each populated area the areas of priority renovation and reconstruction, and also to concentrate budgetary funds and private investments for the implementation of such projects. In the implementation of the above measures, the settlements will be systematically updated in accordance with european standards.

  10. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    1984-03-01

    The Lawrence Livermore National Laboratory publishes the Energy and Technology Review Monthly. This periodical reviews progress mode is selected programs at the laboratory. This issue includes articles on in-situ coal gasification, on chromosomal aberrations in human sperm, on high speed cell sorting and on supercomputers.

  11. Energy and technology review

    International Nuclear Information System (INIS)

    1984-03-01

    The Lawrence Livermore National Laboratory publishes the Energy and Technology Review Monthly. This periodical reviews progress mode is selected programs at the laboratory. This issue includes articles on in-situ coal gasification, on chromosomal aberrations in human sperm, on high speed cell sorting and on supercomputers

  12. Impacts of CO2 emission constraints on technology selection and energy resources for power generation in Bangladesh

    International Nuclear Information System (INIS)

    Alam Hossain Mondal, Md.; Mathur, Jyotirmay; Denich, Manfred

    2011-01-01

    This paper examines the impacts of CO 2 emission reduction target and carbon tax on future technologies selection and energy use in Bangladesh power sector during 2005-2035. The analyses are based on a long-term energy system model of Bangladesh using the MARKAL framework. The analysis shows that Bangladesh will not be able to meet the future energy demand without importing energy. However, alternative policies on CO 2 emission constraints reduce the burden of imported fuel, improve energy security and reduce environmental impacts. The results show that the introduction of the CO 2 emission reduction targets and carbon taxes directly affect the shift of technologies from high carbon content fossil-based to low carbon content fossil-based and clean renewable energy-based technologies compared to the base scenario. With the cumulative CO 2 emission reduction target of 10-20% and carbon tax of 2500 Taka/ton, the cumulative net energy imports during 2005-2035 would be reduced in the range of 39-65% and 37%, respectively, compared to the base scenario emission level. The total primary energy requirement would be reduced in the range of 4.5-22.3% in the CO 2 emission reduction targets and carbon tax 2500 Taka/ton scenarios and the primary energy supply system would be diversified compared to the base scenario. - Research highlights: → MARKAL model is used for the analysis in Bangladesh power sector. → The analysis shows that Bangladesh will not be able to meet the future electricity demand without importing fuel. → Alternative policies on CO 2 emission constraints reduce the burden of imported fuel, improve energy security and reduce environmental impacts.

  13. Authoring Newspaper Science Articles: A Rewarding Experience

    Science.gov (United States)

    Gonzalez-Espada, Wilson J.

    2009-01-01

    In this article, the author summarizes the rationale for using science articles in K-16 education and addresses some of its limitations. The author also encourages scientists and college science faculty to contribute contextually relevant articles that might include selected literary techniques to their local or state newspapers.

  14. Science, Technology, Engineering and Math Readiness: Ethno-linguistic and gender differences in high-school course selection patterns

    Science.gov (United States)

    Adamuti-Trache, Maria; Sweet, Robert

    2014-03-01

    The study examines science-related course choices of high-school students in the culturally diverse schools of the province of British Columbia, Canada. The analysis employs K-12 provincial data and includes over 44,000 students born in 1990 who graduated from high school by 2009. The research sample reflects the presence of about 27% of students for whom English is not a first language. We construct an empirical model that examines ethno-linguistic and gender differences in Grade 12 course choices while accounting for personal and situational differences among students. The study employs a course selection typology that emphasizes readiness for science, technology, engineering and math fields of study. Findings indicate that math- and science-related course selection patterns are strongly associated with ethnicity, qualified not only by gender and prior math and science achievement but also by the individual's grade level at entry to the system and enrollment in English as a Second Language program. Students who are more likely to engage in math and science courses belong to Asian ethno-linguistic groups and entered the provincial school system during the senior high-school years. We suggest that ethnic diversity and broader academic exposure may play a crucial role in changing the gender composition of science classrooms, university fields of study and science-related occupations.

  15. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  16. ENVIRONMENTAL TECHNOLOGY VERIFICATION: TEST/QA PLAN FOR THE VERIFICATION TESTING OF SELECTIVE CATALYTIC REDUCTION CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

    Science.gov (United States)

    The U.S. Environmental Protection Agency established the Environmental Technology Verification Program to accelerate the development and commercialization of improved environmental technology through third party verification and reporting of product performance. Research Triangl...

  17. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-08-08

    Aug 8, 2017 ... program codes) assembly of program systems of applied appointment are presented in article. Author Correspondence ... automated), testing of the created system, its documenting, quality assessment, estimation of cost. Assembly is carried out in the ... JAVA environments. In article (with specification as far ...

  18. Introduction to Wiener's Article

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 1. Introduction to Wiener's Article. V Rajaraman. Reflections Volume 4 Issue 1 January 1999 pp 80-80. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/004/01/0080-0080. Author Affiliations.

  19. Indefinite articles and beyond

    NARCIS (Netherlands)

    Le Bruyn, B.S.W.

    2010-01-01

    This dissertation challenges the standard view on indefinite articles as argument markers and determiners that block bare nominal arguments. It argues for a more fine-grained view in which articles are poor in their semantics but rich in their pragmatic competition with bare nominals and other

  20. NASA Chandra X-ray Observatory Selected as Editor's Choice in 2000 Discover Magazine Awards for Technological Innovation

    Science.gov (United States)

    2000-06-01

    The Chandra X-ray Observatory, NASA's newest and most powerful X-ray space telescope, has been selected as the winner of the Editor's Choice category of the 2000 Discover Magazine Awards for Technological Innovation. The team of government, industry, university and research institutions that designed, built and deployed Chandra for NASA's Marshall Space Flight Center, Huntsville, Ala, will be formally recognized June 24 at a gala awards celebration at Epcot at the Walt Disney World Resort in Orlando, Fl. Dr. Harvey Tananbaum, director of the Smithsonian Astrophysical Observatory's Chandra X-ray Science Center, Cambridge, Mass., which conducts the Chandra science mission for NASA, will receive the award on behalf of the team. "Chandra has opened a new window for astronomers into the universe of high-energy cosmic events such as pulsars, supernova remnants and black holes," said Tananbaum. "We're now able to create spectacularly detailed images of celestial phenomena whose mere existence we could only hypothesize before." Among Chandra's most significant discoveries to date, he lists the detection of a giant ring around the heart of the Crab Nebula, details of the shock wave created by an exploding star and resolution of the high-energy X-ray "glow" in the universe into millions of specific light sources. "The successful launch, deployment and on-orbit operations of NASA's Chandra X-ray Observatory is a testament to the solid partnership between TRW, NASA and the science community that has been enabling NASA's most important space science missions for the past 40 years," said Timothy W. Hannemann, executive vice president and general manager, TRW Space & Electronics Group. "The extraordinary images that Chandra is delivering daily speaks loudly not only to the quality of the science instruments on board, but also to the engineering talents and dedication to mission success exhibited by every member of NASA's Chandra mission team." Chandra, named in honor of Nobel

  1. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-10-17

    Oct 17, 2017 ... multiple-output (MIMO) and orthogonal frequency-division multiplexing (OFDM) technology are introduced in the LTE downlink transmission while Single Carrier Frequency. Division Multiple Access (SC-FDMA) is used in the uplink [1]. Those technologies focus more on multipath interference and improve ...

  2. Full Length Research Article

    African Journals Online (AJOL)

    Dr Ahmed

    1School of Science Technology, Federal College of Chemical and Leather. Technology, PMB 1034, Zaria. Nigeria. ... investment for T periods at an interest rate or rate of return of r per annum (Bowers et al., 1986). .... Hence the variance around the mean may be used to measure the degree of confidence about the possible ...

  3. Research Article Special Issue

    African Journals Online (AJOL)

    2016-07-20

    Jul 20, 2016 ... recycling and production in lower level compared to the thermal methods as steam assisted gravity drainage SAGD due ... to the sea in the saturation condition, in this case the dew point. This criterion should be ..... Energy Technology Lab US Department of Energy, Arctic Energy Technology. Development ...

  4. Research Article Special Issue

    African Journals Online (AJOL)

    2018-01-15

    Jan 15, 2018 ... printing technology in AM system, Fused Deposition Modeling was the first technology developed by Statasys Inc. ... printing method by stacking layer of thermoplastic material upon one another until a complete ... engineering application such automotive, aerospace, biomedical, customer product industry.

  5. Research Article Special Issue

    African Journals Online (AJOL)

    2017-10-05

    Oct 5, 2017 ... application of technology to monitor and control the production and delivery of products and services” [9]. Automation in KM ... Responsiveness: Agents perceive their environment and respond in a timely fashion to changes in it. ..... Business. Technology Trends and Impacts, Council Opinion, 2007, 8(1): ...

  6. Research Trends in Technology-Based Learning from 2000 to 2009: A Content Analysis of Publications in Selected Journals

    Science.gov (United States)

    Hsu, Yu-Chen; Ho, Hsin Ning Jessie; Tsai, Chin-Chung; Hwang, Gwo-Jen; Chu, Hui-Chun; Wang, Chin-Yeh; Chen, Nian-Shing

    2012-01-01

    This paper provides a content analysis of studies in technology-based learning (TBL) that were published in five Social Sciences Citation Index (SSCI) journals (i.e. "the British Journal of Educational Technology, Computers & Education, Educational Technology Research & Development, Educational Technology & Society, the Journal of Computer…

  7. Scientific Journal Articles

    Science.gov (United States)

    These are abstracts of peer-reviewed articles, authored by Office of Children's Health Protection staff. They cover topics including risk assessment for early life stages, inhalation dosimetry, and manganese in drinking water.

  8. Research Article Special Issue

    African Journals Online (AJOL)

    2016-05-15

    9867. Available online at http://www.jfas.info. Research Article. Special .... 809. Table 3. Content analysis of questioning level for each grade based on cognitive domain. (Pre-test). Group. Grade knowledge. Comprehension.

  9. Multilingual News Article Classification

    OpenAIRE

    Skjennum, Patrick L

    2016-01-01

    News is an ever-growing and global resource, reliant on robust distribution networks to spread information. This thesis investigates how exploiting semantic, contextual and ontological information may form a basis for a language independent news article classification system. In light of the above, a scalable multi-label news article classification system, based exclusively on extracted DBpedia entities, and a predetermined standardized set of fixed-size IPTC Media Topic categories, is p...

  10. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    Malaysia. Published online: 05 October 2017. ABSTRACT. This study applied four hydrology parameters. The findings from Principal Component. Analysis confirmed that all selected parameters were significant to be taken as main tools for further analysis with result of R2> 0.7. SPC set up a new control limit for all selected.

  11. Research Article Special Issue

    African Journals Online (AJOL)

    2017-08-08

    Aug 8, 2017 ... Standards of selecting and evaluating athletes by this method are sometimes not complete and reasonable. As a result ... decision-makers such as peers and parents and the tension to select players for immediate success. ... Another related studies included psychology as third component [1-2]. Various ...

  12. Performance-Based Technology Selection Filter application report for Teledyne Wah Chang Albany Operable Unit Number One

    International Nuclear Information System (INIS)

    Richardson, J.G.; Morrison, J.L.; Morneau, R.A.; O'Brien, M.C.; Rudin, M.J.

    1992-05-01

    This report summarizes the application of the Performance-Based Technology Selection Filter (PBTSF) developed for the Idaho National Laboratory's Buried Waste Integrated Demonstration Program as applied to remediation activities conducted at the Teledyne Wah Chang Albany (TWCA) Superfund Site, Operable Unit One. The remedial action at the TWCA Operable Unit One consisted of solidification, excavation, transportation, and monocell disposal of the contents of two sludge ponds contaminated with various inorganic and organic compounds. Inorganic compounds included low levels of uranium and radium isotopes, as well zirconium, hafnium, chromium, mercury, and nickel. Organic compounds included methylene chloride, 1,1,1-trichloroethane, 1,1-dichloroethane, tetrachloroethane, and hexachlorobenzene. Remediation began in June 1991, and was completed in November 1991. The TWCA Operable Unit One configuration option consisted of 15 functional subelements. Data were gathered on these subelements and end-to-end system operation to calculate numerical values for 28 system performance measures. These were then used to calculate a system performance score. An assessment was made of the availability and definitional clarity of these performance measures, applicability of PBTSF utility functions, and rollup methodology. The PBTSF scoring function worked well, with few problems noted in data gathering, utility function normalization, and scoring calculation. The application of this process to an actual in situ treatment and excavation technical process option clarified the specific terms and bounds of the performance score functions, and identified one problem associated with the definition of system boundary

  13. Selection of dominant NSLAB from a mature traditional cheese according to their technological properties and in vitro intestinal challenges.

    Science.gov (United States)

    Papanikolaou, Zacharias; Hatzikamari, Magdalini; Georgakopoulos, Panayiotis; Yiangou, Minas; Litopoulou-Tzanetaki, Evanthia; Tzanetakis, Nikolaos

    2012-05-01

    Isolates (47) of lactobacilli from 5 different productions of Melichloro cheese were examined for potential use as adjunct cultures. The sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) of whole-cell proteins classified 29 isolates as L. paraplantarum and 18 as L. paracasei subsp. paracasei. Randomly amplified polymorphic DNA-polymerase chain reaction (RAPD-PCR) analysis differentiated the L. paraplantarum and L. paracasei subsp. paracasei isolates at strain level and both, RAPD analysis and whole-cell protein profiling provided useful information about the diversity of nonstarter lactic acid bacteria (NSLAB) in the different cheese productions. The isolates were slow acidifiers and about 70% of them degraded, preferentially α(s)-casein. The amounts of amino acids accumulated in the milk increased with the incubation time. A similar enzyme profile was exhibited by strains of both species, except for α-mannosidase and α-fucosidase, which were not detected in the L. paracasei subsp. paracasei strains. All strains grew in the presence of bile at 0.3% and the majority was able to withstand pH 2.5 and pancreatin at 0.1%. Moreover, all strains reduced cholesterol in vitro, with higher removal ability recorded for strains of L. paraplantarum. A narrow spectrum of antibacterial activity was recorded for 88% of the strains. Selected isolates with appropriate technological and interesting in vitro intestinal challenges could be used as adjuncts and deserve further studies. © 2012 Institute of Food Technologists®

  14. Research Article Special Issue

    African Journals Online (AJOL)

    School of Ocean Engineering, Universiti Malaysia Terengganu, 21030 Kuala Terengganu,. Terengganu, Malaysia. 5. Faculty of Electrical Engineering, Universiti Teknologi MARA, 23000 Dungun, Terengganu,. Malaysia. Published online: 15 January 2018. ABSTRACT. The human technology advancement grows rapidly ...

  15. Research Article Special Issue

    African Journals Online (AJOL)

    2018-01-15

    . GPS and shortwave broadcast services, space wave was used to transmit data from transmitter to the receiver. ..... Journal on Advanced Science, Engineering and Information Technology, 2016, 6(5):770-774. [19] Yeap K H ...

  16. Research Article Special Issue

    African Journals Online (AJOL)

    2017-02-15

    . SERVICE QUALITY (CASE STUDY: EGHTESAD NOVIN BANK). N. Shima. 1*. , A. Kazemi Mohamadali. 2. 1. PhD student, Department of Information Technology Management, Electronic Branch, Islamic. Azad University ...

  17. Main Propulsion Test Article (MPTA)

    Science.gov (United States)

    Snoddy, Cynthia

    2010-01-01

    Scope: The Main Propulsion Test Article integrated the main propulsion subsystem with the clustered Space Shuttle Main Engines, the External Tank and associated GSE. The test program consisted of cryogenic tanking tests and short- and long duration static firings including gimbaling and throttling. The test program was conducted on the S1-C test stand (Position B-2) at the National Space Technology Laboratories (NSTL)/Stennis Space Center. 3 tanking tests and 20 hot fire tests conducted between December 21 1 1977 and December 17, 1980 Configuration: The main propulsion test article consisted of the three space shuttle main engines, flightweight external tank, flightweight aft fuselage, interface section and a boilerplate mid/fwd fuselage truss structure.

  18. Neutron absorbing article

    International Nuclear Information System (INIS)

    Naum, R.G.; Owens, D.P.; Dooher, G.I.

    1979-01-01

    A neutron absorbing article, in flat plate form and suitable for use in a storage rack for spent fuel, includes boron carbide particles, diluent particles and a solid, irreversibly cured phenolic polymer cured to a continuous matrix binding the boron carbide and diluent particles. The total conent of boron carbide and diluent particles is a major proportion of the article and the content of cured phenolic polymer present is a minor proportion. By regulation of the ratio of boron carbide particles to diluent particles, normally within the range of 1:9 and 9:1 and preferably within the range of 1:5 to 5:1, the neutron absorbing activity of the product may be controlled, which facilitates the manufacture of articles of particular absorbing activities best suitable for specific applications

  19. Technological Capability's Predictor Variables

    Directory of Open Access Journals (Sweden)

    Fernanda Maciel Reichert

    2011-03-01

    Full Text Available The aim of this study was to identify the factors that influence in configuration of the technological capability of companies in sectors with medium-low technological intensity. To achieve the goal proposed in this article a survey was carried out. Based on the framework developed by Lall (1992 which classifies firms in basic, intermediate and advanced level of technological capability; it was found that the predominant technological capability is intermediate, with 83.7% of respondent companies (plastics companies in Brazil. It is believed that the main contribution of this study is the finding that the dependent variable named “Technological Capability” can be explained at a rate of 65% by six variables: development of new processes; selection of the best equipment supplier; sales of internally developed new technology to third parties; design and manufacture of equipment; study of the work methods and perform inventory control; and improvement of product quality.

  20. Neutron absorbing article

    International Nuclear Information System (INIS)

    Naum, R.G.; Owens, D.P.; Dooker, G.I.

    1981-01-01

    A neutron-absorbing article suitable for use in spent fuel racks is described. It comprises boron carbide particles, diluent particles, and a phenolic polymer cured to a continuous matrix. The diluent may be silicon carbide, graphite, amorphous carbon, alumina, or silica. The combined boron carbide-diluent phase contains no more than 2 percent B 2 O 3 , and the neutron-absorbing article contains from 20 to 40 percent phenol resin. The ratio of boron carbide to diluent particles is in the range 1:9 to 9:1