WorldWideScience

Sample records for technology sect study

  1. A study of the morphoanatomical characters of the leaves of Chamaecrista (L. Moench sect. Apoucouita (Leguminosae-Caesalpinioideae

    Directory of Open Access Journals (Sweden)

    Ítalo Antônio Cotta Coutinho

    2016-01-01

    Full Text Available ABSTRACT Little attention has been paid to species of Chamaecrista sect. Apoucouita (Leguminosae-Caesalpinioideae, especially regarding anatomical studies. When only vegetative material is available, the identification of such species may be difficult. Additionally, vegetative material of some species of C. sect. Apoucouita may be even harder to identify because they can resemble species of Inga Mill. (Leguminosae-Mimosoideae. The present study focused on recognizing morphoanatomical characters of leaves that are taxonomically useful for the species of C. sect. Apoucouita by employing standard anatomical techniques. The arrangement of the vascular system in the petiole/rachis, dorsiventral mesophyll, mucilage idioblasts in the epidermis of leaflets and hypostomatic leaves were some of the characters shared by all species studied. Length of the petiole, position and type of extrafloral nectaries, leaflet venation, presence and type of papillae on the epidermis of the leaflet blades and sclereids in the mesophyll were some of the characters useful in the distinction of taxa. The vascular arrangement of the petiole/rachis is a promising character in the distinction of species of C. sect. Apoucouita and Inga. Based on morphoanatomical data, the taxonomic revision of some species and varieties ascribed to C. sect. Apoucouita is suggested.

  2. STUDY ON THE HISTORY AND ARCHITECTURE OF THE RINZAI ZEN SECT BUDDHIST MONASTERIES IN KYÔTO

    Directory of Open Access Journals (Sweden)

    Antariksa Antariksa

    2000-01-01

    Full Text Available In the middle of the 14th century, the Five Temples or Five Mountains (Gozan of Rinzai Zen sect were developed rapidly in the city of Kyôto. The ranking system of officially sponsored by Zen Buddhist monasteries were created by the Kamakura and Muromachi government. The Gozan system originally included three monasteries in Kyôto and three in Kamakura, but immediately spread to five monasteries in several cities. While the two great monasteries, are not members of the Gozan group, which belonged to the Rinka group of Rinzai Zen sect temples. The system, which corresponds to a Chinese hierarchical model, was established in Japan during the Kamakura period. The purpose of this study is to attempt to clarify the history and architecture of Rinzai Zen sect Buddhist monastery. The central functioning building of the Zen Buddhist monastery reflects the repetition, consistency, persistence, and order of the monastic ritual.

  3. Report from AmSECT's International Consortium for Evidence-Based Perfusion: American Society of Extracorporeal Technology Standards and Guidelines for Perfusion Practice: 2013.

    Science.gov (United States)

    Baker, Robert A; Bronson, Shahna L; Dickinson, Timothy A; Fitzgerald, David C; Likosky, Donald S; Mellas, Nicholas B; Shann, Kenneth G

    2013-09-01

    One of the roles of a professional society is to develop standards and guidelines of practice as an instrument to guide safe and effective patient care. The American Society of Extracorporeal Technology (AmSECT) first published its Essentials for Perfusion Practice, Clinical Function: Conduct of Extracorporeal Circulation in 1993. The International Consortium for Evidence-Based Perfusion (ICEBP), a committee within AmSECT, was tasked with updating this document in 2010. The aim of this report is to describe the method of development and content of AmSECT's new professional standards and guidelines. The ICEBP committee independently evaluated and provided input regarding the current "Essentials and Guidelines." Structural changes were made to the entire document, and a draft document was developed, presented, and circulated to the AmSECT Board of Directors and broader membership for comment. Informed by these reviews, a revised document was then presented to the Society for a membership vote. The final document consists of 15 areas of practice covered by 50 Standards and 38 Guidelines (see Appendix 1) with the first standard focusing on the development of institutional protocols to support their implementation and use. A majority of the membership voted to accept the document (81.2% of the voting membership accepting, 18.8% rejecting). After an audit of the balloting process by AmSECT's Ethics Committee, the results were reported to the membership and the document was officially adopted on July 24, 2013. The Standards and Guidelines will serve as a useful guide for cardiac surgical teams that wish to develop institution-specific standards and guidelines to improve the reliability, safety, and effectiveness of adult cardiopulmonary bypass. The ICEBP recognizes that the development of a Standards and Guidelines statement alone will not change care. Safe, reliable, and effective care will be best served through the development and implementation of institutional

  4. Notes on Cantharellus sect. Leptocantharellus

    NARCIS (Netherlands)

    Donk, M.A.

    1969-01-01

    Cantharellus sect. Leptocantharellus Peck is an earlier name for Cantharellus subgen. Phaeocantharellus Corner. The European species fall apart in two groups (Lepto-Plicati and Lepto-Phlebini) on the basis of the hymenophoral configuration. Most of the older names provided in profusion for the few

  5. DySectAPI: Scalable Prescriptive Debugging

    DEFF Research Database (Denmark)

    Jensen, Nicklas Bo; Karlsson, Sven; Quarfot Nielsen, Niklas

    We present the DySectAPI, a tool that allow users to construct probe trees for automatic, event-driven debugging at scale. The traditional, interactive debugging model, whereby users manually step through and inspect their application, does not scale well even for current supercomputers. While...... lightweight debugging models scale well, they can currently only debug a subset of bug classes. DySectAPI fills the gap between these two approaches with a novel user-guided approach. Using both experimental results and analytical modeling we show how DySectAPI scales and can run with a low overhead...

  6. Contrasting evolutionary processes during Quaternary climatic changes and historical orogenies: a case study of the Japanese endemic primroses Primula sect. Reinii.

    Science.gov (United States)

    Yamamoto, Masaya; Ohtani, Masato; Kurata, Kaoruko; Setoguchi, Hiroaki

    2017-11-28

    Recent biogeographic studies have illustrated that Quaternary climatic changes and historical orogenies have driven the development of high levels of biodiversity. In this context, phylogenetic niche conservatism may play a role as a major precursor of allopatric speciation. However, the effects of niche evolution on the diversification patterns of plant species under rapid habitat changes are still unknown. Here, Primula section Reinii, one of the few primroses endemic to the Japanese Archipelago, was investigated. This study aimed to clarify the phylogenetic position and relationships of section Reinii, interpret the biogeographic and diversification patterns of this group and gain a better understanding of the role of climatic niche evolution in the Japanese endemic primroses. Dated phylogeny for Primula section Reinii is presented based on the sequences of six chloroplast genes and one nuclear gene. Biogeographic history was reconstructed using statistical dispersal-vicariance analysis. Macro-evolutionary modelling of the climatic niche was combined with biogeographic inferences. Section Reinii was shown to be monophyletic based on chloroplast and nuclear sequences. Fossil-calibrated dating analysis estimated that this section diverged from its sister taxon, sect. Cortusoides, around 1.82 million years ago, and intraspecific diversification occurred within the last million years. This time frame was characterized by Quaternary climatic oscillations and uplift of high mountains in Japan. Biogeographic inference suggested that this section originated at the northern end of the Japanese Archipelago and then dispersed southward to other islands. Models of climatic niche evolution indicated that the closely related species P. reinii and P. tosanensis have contrasting niche optima and rates of niche evolution. Our results highlight that spatiotemporal heterogeneity in the Japanese islands may play a significant role in the biogeographic history of Japanese endemic

  7. MO-FG-CAMPUS-JeP1-04: Evaluating DECT Vs SECT Range Differences in Proton Therapy Using Clinical Data

    Energy Technology Data Exchange (ETDEWEB)

    Hudobivnik, N; Dedes, G; Parodi, K; Landry, G [Ludwig-Maximilians-Universitaet Muenchen, Garching (Germany); Schwarz, F; Johnson, T; Thieke, C; Belka, C; Sommer, W [LMU Munich, Munich (Germany); Tessonnier, T [Ludwig-Maximilians-Universitaet Muenchen, Garching (Germany); Universitaetsklinikum Heidelberg, Heidelberg (Germany); Verhaegen, F [Maastro Clinic, Maastricht (Netherlands)

    2016-06-15

    Purpose: Range uncertainty from X-ray CT number conversion to stopping power ratio (SPR) is one of the key factors limiting the potential of proton therapy. The large margins required for deep seated tumors degrade the organ sparing achievable with the technology. Of interest is the application of dual energy CT (DECT) to SPR estimation. In this planning study proton range differences between SECT and DECT have been quantified for brain cases. Methods: A last generation dual source DECT scanner was used to acquire SECT (150 kVp with Sn filtration) and DECT (additionally 90 kVp) scans of phantoms and 5 head trauma patients, acting as surrogate cancer patients. Phantom materials were characterized in terms of SPR in a particle beam to obtain reference values. IMPT treatment plans were generated on the basis of SECT and DECT SPR images for hypothetical brain tumors using a short and a long beam path. Range differences between SECT and DECT from plan recalculations were evaluated in beam-eye-view (BEV) by comparing the 80% isodose. Results: For the 18 phantom materials the SECT RMS SPR errors were 2.6% compared to 1.1% for DECT. Group median relative range differences between SECT and DECT plans were −1.0% for the short beam path over the 5 patients investigated in this study. For the long beam path the median difference was −1.4%. These relative range differences corresponded to −0.5 mm and −1.4 mm shifts respectively. Conclusion: This is the first study performing proton therapy treatment planning on DECT patient images. Important range differences of more than 1 mm were observed between SECT and DECT treatment plans, and DECT SPR accuracy was found superior on the basis of phantom measurements. While the patients investigated in this study did not have brain tumors, the findings we observed should apply to cancer patients. Deutsche Forschungsgemeinschaft (MAP); Bundesministerium fur Bildung und Forschung (01IB13001)

  8. Revision of Dorstenia sect. Nothodorstenia (Moraceae)

    NARCIS (Netherlands)

    Berg, C.C.

    1978-01-01

    The African genus Craterogyne Lanjouw has to be united with Dorstenia L. Most species of Craterogyne can be included in Dorstenia sect. Nothodorstenia Engl. A revision of this section is presented. 5 species have been accepted, viz. D. elliptica Bureau, D. djettii J. L. Guillaumet, D. oligogyna

  9. Prioritizing Identities: Cross Categorization of Ethnicity and Religious Sects in Turkey Identities: Ethnicity and/or Religion

    Directory of Open Access Journals (Sweden)

    Goklem Tekdemir Yurtdas

    2015-12-01

    Full Text Available This study aims to investigate how different ethnic groups (Turkish/Kurdish and religious sects (Alevi/Sunni are perceived in Turkey. These groups have a long history of conflicts. In order to examine the perception of these conflicting group identities, we adopted the theoretical frameworks of simple and cross categorization developed by the Social Identity Theory and the Category Differentiation Model. Both theories converge on the idea of in-group favoritism in the case of simple categorization while they offer different explanations for cross categorization condition. In order to test these differing theoretical propositions, we asked our participants to evaluate simple and cross categorization conditions based on variables of ethnicity and sect.  Our sample consisted of 106 individuals from two ethnic groups (Kurdish/Turkish and two religious sects (Alevi/Sunni. The participants completed a questionnaire based on Zavalloni’s focused introspection technique. Within subjects repeated measures ANOVA analysis were carried out for both simple and cross categorization. The results of the analysis revealed that the participants emphasized in-group similarities and out-group differences both for ethnicity and religious sect in the simple categorization condition. Moreover, in-group similarities based on religious sects rather than ethnicity were prioritized in the cross categorization condition. The results confirmed the Social Identity Theory’s assumptions generally. Results were discussed in terms of relevant literature, and in relation to historical and political issues regarding ethnicity and sects in Turkey.

  10. Pollen morphology of the Onobrychis sect. Heliobrychis in Iran

    Directory of Open Access Journals (Sweden)

    Roya Karamian

    2010-01-01

    Full Text Available Pollen morphology of 20 species belonging to Onobrychis sect. Heliobrychis was studied in Iran. The pollen grains from the herbarium specimens were prepared by acetolysis method and then 8 quantitative characters were studied by light microscopy. Data analysis was carried out by cluster analysis and principal component analysis methods. Pollen grains of the sections were 3-colpate with reticulate ornamentation. Results of the study showed that although the pollen grains in the section were comparatively homogenous, but had a considerable variation in the studied quantitative characters. However among the studied characters, equatorial and polar diameters of pollen grains were the most significant characters. The members of the section can be divided into 3 groups based on these characters.

  11. Nigeria and the Boko Haram Sect: Adopting a Better Strategy for Resolving the Crisis

    Science.gov (United States)

    2013-06-01

    ed. Thomas A. Imobighe and Agatha N. T. Eguavoen (Ibadan Nigeria: Heinemann Education Books PLC, 2006), 7; Benjamin Maiangwa and Ufo O. Uzodike, “The...sect were lined up and shot in the back. 111 Hakeem Onapajo and Ufo O. Uzodike, “Boko Haram Terrorism in Nigeria: Man, the State, and the...of Management and Technology, 2008. Maiangwa, Benjamin and Ufo O. Uzodike. “The Changing Dynamics of Boko Haram Terrorism.” Aljazeera Centre for

  12. [Polymorphism of KPI-A genes from plants of the subgenus Potatoe (sect. Petota, Estolonifera and Lycopersicum) and subgenus Solanum].

    Science.gov (United States)

    Krinitsyna, A A; Mel'nikova, N V; Belenikin, M S; Poltronieri, P; Santino, A; Kudriavtseva, A V; Savilova, A M; Speranskaia, A S

    2013-01-01

    Kunitz-type proteinase inhibitor proteins of group A (KPI-A) are involved in the protection of potato plants from pathogens and pests. Although sequences of large number of the KPI-A genes from different species of cultivated potato (Solanum tuberosum subsp. tuberosum) and a few genes from tomato (Solanum lycopersicum) are known to date, information about the allelic diversity of these genes in other species of the genus Solanum is lacking. In our work, the consensus sequences of the KPI-A genes were established in two species of subgenus Potatoe sect. Petota (Solanum tuberosum subsp. andigenum--5 genes and Solanum stoloniferum--2 genes) and in the subgenus Solanum (Solanum nigrum--5 genes) by amplification, cloning, sequencing and subsequent analysis. The determined sequences of KPI-A genes were 97-100% identical to known sequences of the cultivated potato of sect. Petota (cultivated potato Solanum tuberosum subsp. tuberosum) and sect. Etuberosum (S. palustre). The interspecific variability of these genes did not exceed the intraspecific variability for all studied species except Solanum lycopersicum. The distribution of highly variable and conserved sequences in the mature protein-encoding regions was uniform for all investigated KPI-A genes. However, our attempts to amplify the homologous genes using the same primers and the genomes of Solanum dulcamarum, Solanum lycopersicum and Mandragora officinarum resulted in no product formation. Phylogenetic analysis of KPI-A diversity showed that the sequences of the S. lycopersicum form independent cluster, whereas KPI-A of S. nigrum and species of sect. Etuberosum and sect. Petota are closely related and do not form species-specific subclasters. Although Solanum nigrum is resistant to all known races of economically one of the most important diseases of solanaceous plants oomycete Phytophthora infestans aminoacid sequences encoding by KPI-A genes from its genome have nearly or absolutely no differences to the same from

  13. Radiation Protection Ordinance 1989. Supplement with Radiation Protection Register Ordinance, general administration regulation pursuant to Sect. 45 Radiation Protection Ordinance, general administration regulation pursuant to Sect. 62 sub-sect. radiation passport

    International Nuclear Information System (INIS)

    Veith, H.M.

    1990-01-01

    The addendum contains regulations issued supplementary to the Radiation Protection Ordinance: The Radiation Protection Register as of April 3, 1990 including the law on the setting up of a Federal Office on Radiation Protection; the general administration regulation pursuant to Sect. 45 Radiation Protection Ordinance as of February 21, 1990; the general administration regulation pursuant to Sect. 62 sub-sect. 2 Radiation Protection Ordinance as of May 3, 1990 (AVV Radiation passport). The volume contains, apart from the legal texts, the appropriate decision by the Bundesrat, the official explanation from the Bundestag Publications as well as a comprehensive introduction into the new legal matter. (orig.) [de

  14. Corolla morphology influences diversification rates in bifid toadflaxes (Linaria sect. Versicolores)

    Science.gov (United States)

    Fernández-Mazuecos, Mario; Blanco-Pastor, José Luis; Gómez, José M.; Vargas, Pablo

    2013-01-01

    Background and Aims The role of flower specialization in plant speciation and evolution remains controversial. In this study the evolution of flower traits restricting access to pollinators was analysed in the bifid toadflaxes (Linaria sect. Versicolores), a monophyletic group of ∼30 species and subspecies with highly specialized corollas. Methods A time-calibrated phylogeny based on both nuclear and plastid DNA sequences was obtained using a coalescent-based method, and flower morphology was characterized by means of morphometric analyses. Directional trends in flower shape evolution and trait-dependent diversification rates were jointly analysed using recently developed methods, and morphological shifts were reconstructed along the phylogeny. Pollinator surveys were conducted for a representative sample of species. Key Results A restrictive character state (narrow corolla tube) was reconstructed in the most recent common ancestor of Linaria sect. Versicolores. After its early loss in the most species-rich clade, this character state has been convergently reacquired in multiple lineages of this clade in recent times, yet it seems to have exerted a negative influence on diversification rates. Comparative analyses and pollinator surveys suggest that the narrow- and broad-tubed flowers are evolutionary optima representing divergent strategies of pollen placement on nectar-feeding insects. Conclusions The results confirm that different forms of floral specialization can lead to dissimilar evolutionary success in terms of diversification. It is additionally suggested that opposing individual-level and species-level selection pressures may have driven the evolution of pollinator-restrictive traits in bifid toadflaxes. PMID:24142920

  15. The significant event compilation tree-sect: Theory and application

    International Nuclear Information System (INIS)

    Ishack, G.A.

    1990-01-01

    The Significant Event Compilation Tree (SECT) is a computer programme that was developed by staff of the Canadian Atomic Energy Control Board during the period 1984-86. Its primary purpose is to link seemingly unrelated events, or parts of events, that could have occurred at different points in time at various nuclear power plants. Using such a software tool aids in the identification of potential paths and/or scenarios that: a. may not have been foreseen in the accident analysis (including fault tree verification), b. could lead to a certain failure; or c. could have been caused by a certain initiating event (which may have ended or been terminated at an earlier stage). This paper describes: a. the basic idea of SECT; b. the criteria whereby events are selected and coded; c. the options available to the user; d. an example of the programme's application in Canada; and e. a demonstration of its possible use in conjunction with the NEA-IRS

  16. Development and Characterization of Microsatellite Markers for Central American Begonia sect. Gireoudia (Begoniaceae

    Directory of Open Access Journals (Sweden)

    Alex D. Twyford

    2013-05-01

    Full Text Available Premise of the study: Transcriptome sequence data were used to design microsatellite primers for two widespread Central American Begonia species, B. heracleifolia and B. nelumbiifolia, to investigate population structure and hybridization. Methods and Results: The transcriptome from vegetative meristem tissue from the related B. plebeja was mined for microsatellite loci, and 31 primer pairs amplified in the target species. Fifteen primer pairs were combined in two multiplex PCR reactions, which amplified an average of four alleles per locus. Conclusions: The markers developed will be a valuable genetic resource for medium-throughput genotyping of Central American species of Begonia sect. Gireoudia. A subset of these markers have perfect sequence matches to Asian B. venusta, and are promising for studies in other Begonia sections.

  17. Fruit anatomy of species of Solanum sect. Torva (Solanaceae Anatomía del fruto en especies de Solanum sect. Torva (Solanaceae

    Directory of Open Access Journals (Sweden)

    Franco E. Chiarini

    2010-12-01

    Full Text Available The mature fruits of 10 South American species of Solanum sect. Torva were studied. Cross and longitudinal microtome sections, stained with astra blue/basic fuchsin, were made for microscopic examination. All species present an epidermis formed by a unistrate layer of small, isodiametric cells, with dense content and cellulosic walls. Immediately below, a hypodermis is always found, consisting of a well-defined layer of lignified cells with a single calcium oxalate crystal occupying the whole lumen of each cell. This is followed by one layer of cellulosic, isodiametric cells with dense cytoplasm and then several collenchymatous layers, sometimes with sclerified cell walls. The mesocarp comprises two zones histologically differentiated: an external one (formed by regular, vacuolated, medium-sized cells with small intercellular spaces, and an internal one, commonly juicy, and developing proliferations among the seeds. The fruits analyzed are alike, and despite some particularities, they can be classified as berries in the conventional sense. All the traits examined agree with the ornithochorous dispersal syndrome. The homogeneity in fruit traits may be due to shared habit, habitat and sexual system.Se estudiaron los frutos maduros de 10 especies sudamericanas de Solanum sect. Torva. Se examinaron en microscopio cortes microtómicos transversales y longitudinales teñidos con azul astral/fucsina básica. Todas las especies presentaron una epidermis unistrata de células pequeñas, isodiamétricas, de contenido denso y paredes celulósicas. Inmediatamente por debajo se encontró siempre una hipodermis, formada por una capa bien definida de células lignificadas con un cristal de oxalato de calcio en el lúmen de cada célula. A continuación se halló otra capa de celulas isodiamétricas, celulósicas, de contenido denso, y luego varias capas de colénquima, en ocasiones con paredes esclerificadas. El mesocarpo presentó dos zonas histologicamente

  18. Evaluation of the quality of picture in studies of sect brain acquired with various collimators; Evaluacion de la calidad de imagen en estudios de spect cerebral adquiridos con distintos colimadores

    Energy Technology Data Exchange (ETDEWEB)

    Moran Velasco, V.; Prieto Azcarete, E.; Barbes Fernandez, B.; Sancho rodriguez, L.; Ribelles Segura, M. J.; Richter echevarria, J. A.; Arbizu Lostao, J.; Marti-Climent, J. M.

    2015-07-01

    On the practice clinic , the performance of the systems SPECT depends on in large measurement of the quality of image. The goal of East study was evaluate how affect the parameters of reconstruction of studies SPECT of perfusion brain acquired with a collimator of holes parallel (LEHR) and other of holes in fan (Fan-Beam). (Author)

  19. Phylogenetic analyses of Begonia sect. Coelocentrum and allied limestone species of China shed light on the evolution of Sino-Vietnamese karst flora.

    Science.gov (United States)

    Chung, Kuo-Fang; Leong, Wai-Chao; Rubite, Rosario Rivera; Repin, Rimi; Kiew, Ruth; Liu, Yan; Peng, Ching-I

    2014-12-01

    The picturesque limestone karsts across the Sino-Vietnamese border are renowned biodiversity hotspot, distinguished for extremely high endemism of calciphilous plants restricted to caves and cave-like microhabitats that have functioned as biological refugia on the otherwise harsh habitats. To understand evolutionary mechanisms underlying the splendid limestone flora, dated phylogeny is reconstructed for Asian Begonia, a species-rich genus on limestone substrates represented by no less than 60 species in southern China, using DNA sequences of nrITS and chloroplast rpL16 intron. The sampling includes 94 Begonia species encompassing most major Asian clades with a special emphasized on Chinese species. Except for two tuberous deciduous species and a species with upright stems, a majority of Sino-Vietnamese limestone Begonia (SVLB), including sect. Coelocentrum (19 species sampled) and five species of sect. Diploclinium, Leprosae, and Petermannia, are rhizomatous and grouped in a strongly supported and yet internally poorly resolved clade (Clade SVLB), suggesting a single evolutionary origin of the adaptation to limestone substrates by rhizomatous species, subsequent species radiation, and a strong tendency to retain their ancestral niche. Divergence-time estimates indicate a late Miocene diversification of Clade SVLB, coinciding with the onset of the East Asian monsoon and the period of extensive karstification in the area. Based on our phylogenetic study, Begonia sect. Coelocentrum is recircumscribed and expanded to include other members of the Clade SVLB (sect. Diploclinium: B. cavaleriei, B. pulvinifera, and B. wangii; sect. Leprosae: B. cylindrica and B. leprosa; sect. Petermannia: B. sinofloribunda). Because species of Clade SVLB have strong niche conservatism to retain in their ancestral habitats in cave-like microhabitats and Begonia are generally poor dispersers prone to diversify allopatrically, we propose that extensive and continuous karstification of the

  20. Geographical isolation caused the diversification of the Mediterranean thorny cushion-like Astragalus L. sect. Tragacantha DC. (Fabaceae).

    Science.gov (United States)

    Hardion, Laurent; Dumas, Pierre-Jean; Abdel-Samad, Farah; Bou Dagher Kharrat, Magda; Surina, Bostjan; Affre, Laurence; Médail, Frédéric; Bacchetta, Gianluigi; Baumel, Alex

    2016-04-01

    Understanding the origin and evolution of Mediterranean vascular flora within the long-term context of climate change requires a continuous study of historical biogeography supported by molecular phylogenetic approaches. Here we provide new insights into the fascinating but often overlooked diversification of Mediterranean xerophytic plants. Growing in some of the most stressing Mediterranean environments, i.e. coastal and mountainous opened habitats, the circum-Mediterranean Astragalus L. sect. Tragacantha DC. (Fabaceae) gathers several thorny cushion-like taxa. These have been the subjects of recent taxonomical studies, but they have not yet been investigated within a comprehensive molecular framework. Bayesian phylogenetics applied to rDNA ITS sequences reveal that the diversification of A. sect. Tragacantha has roots dating back to the Pliocene, and the same data also indicate an eastern-western split giving rise to the five main lineages that exist today. In addition, AFLP fingerprinting supports an old east-west pattern of vicariance that completely rules out the possibility of a recent eastern origin for western taxa. The observed network of genetic relationships implies that contrary to what is widely claimed in the taxonomic literature, it is range fragmentation, as opposed to a coastal-to-mountain ecological shift, that is likely the main driver of diversification. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. The evolutionary history of Eugenia sect. Phyllocalyx (Myrtaceae) corroborates historically stable areas in the southern Atlantic forests.

    Science.gov (United States)

    de Oliveira Bünger, Mariana; Fernanda Mazine, Fiorella; Forest, Félix; Leandro Bueno, Marcelo; Renato Stehmann, João; Lucas, Eve J

    2016-12-01

    Eugenia sect. Phyllocalyx Nied. includes 14 species endemic to the Neotropics, mostly distributed in the Atlantic coastal forests of Brazil. Here the first comprehensive phylogenetic study of this group is presented, and this phylogeny is used as the basis to evaluate the recent infrageneric classification in Eugenia sensu lato (s.l.) to test the history of the evolution of traits in the group and test hypotheses associated with the history of this clade. A total of 42 taxa were sampled, of which 14 were Eugenia sect. Phyllocalyx for one nuclear (ribosomal internal transcribed spacer) and four plastid markers (psbA-trnH, rpl16, trnL-rpl32 and trnQ-rps16). The relationships were reconstructed based on Bayesian analysis and maximum likelihood. Additionally, ancestral area analysis and modelling methods were used to estimate species dispersal, comparing historically climatic stable (refuges) and unstable areas. Maximum likelihood and Bayesian inferences indicate that Eugenia sect. Phyllocalyx is paraphyletic and the two clades recovered are characterized by combinations of morphological characters. Phylogenetic relationships support a link between Cerrado and south-eastern species and a difference in the composition of species from north-eastern and south-eastern Atlantic forest. Refugia and stable areas identified within unstable areas suggest that these areas were important to maintain diversity in the Atlantic forest biodiversity hotspot. This study provides a robust phylogenetic framework to address important historical questions for Eugenia s.l. within an evolutionary context, supporting the need for better taxonomic study of one of the largest genera in the Neotropics. Furthermore, valuable insight is offered into diversification and biome shifts of plant species in the highly environmentally impacted Atlantic forest of South America. Evidence is presented that climate stability in the south-eastern Atlantic forest during the Quaternary contributed to the

  2. Emerging Technologies Integrating Technology into Study Abroad

    Science.gov (United States)

    Godwin-Jones, Robert

    2016-01-01

    "Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

  3. Morfologia dos tricomas em Tibouchina sect. Pleroma (D. Don cogn. (melastomataceae

    Directory of Open Access Journals (Sweden)

    Paulo José Fernandes Guimarães

    1999-01-01

    Full Text Available Melastomataceae é a família que apresenta a maior diversidade de tricomas. Dr. Wurdack em seu "Atlas of hairs" reconheceu 46 tipos de tricomas para as Melastomataceae neotropicais com o uso de MEV, e referiu 17 destes para o gênero Tibouchina. Em Melastomataceae a morfologia dos tricomas tem sido extensivamente usada na delimitação dos táxons, assim como em estudos que antecederam ao trabalho de Cogniaux, a monografia das Melastomataceae brasileiras publicada em 1885. Em Tibouchina sect. Pleroma a morfologia dos tricomas foi substancial para a circunscrição de várias espécies. O uso da MEV permitiu uma caracterização dos 15 tipos diferentes de tricomas observados nas 41 espécies examinadas. Os diferentes tipos são descritos com base no aspecto morfológico tanto em MO como em MEV e ilustrados através de eletromicrografias de varredura e fotomicrografias.The Melastomataceae display greater trichome diversity. Dr. Wurdack, in his Atlas of hairs, recognized 46 types of trichomes for the Neotropical Melastomataceae through the Scanning Electron Microscope (SEM, and referred 17 of them to the genus Tibouchina. The trichome morphology has been extensively used in the delimitation of the taxa in Melastomataceae, as well as in previous studies by Cogniaux, the monograph of Brazilian Melastomataceae published in 1885. The morphology of the trichomes was essential for the delimitation of several species in Tibouchina section Pleroma. The use of SEM provided the best characterization of the 15 different types of trichomes recognized among the 41 species examined. These were described based on the morphological appearance, both optical microscopy and scanning electron microscopy, and illustrated by scanning electron micrographs and photomicrographs.

  4. Cytotaxonomy of North African species of Delphinium L. sect. Delphinium (Ranunculaceae

    Directory of Open Access Journals (Sweden)

    Blanché, César

    1990-05-01

    Full Text Available Both chromosome numbers and karyotype structure from 15 wild North-African populations of Delphinium L. sect. Delphinium were studied. Delphinium balansae Boiss. & Reuter, with a more symmetrical karyotype, appears as a possible perennial ancestor of' the remaining annuals with highly asymmetrical and shorter karyotype. A taxonomical reorganization of this section is proposed: two new series (ser. Macropetala ser. nova and ser. Balansae ser. nova. and two new nomenclatural combinations (D. nanum subsp. alboliliaceum and D. nanum subsp. elongatum are proposed.

    S'han estudiat els nombres cromosòmics i l'estructura deis cariotipus de 15 poblacions nordafricanes de Delphinium L. sect. Delphinium. Delphinium balansae Boiss. & Reuter, amb cariotipus mes simètric, apareix com a possible ancestre perenne de la resta d’espècies anuals amb cariotipus més asimètric i més curt. Es proposa una reorganització taxonòmica de la secció, d'on es descriu en dues series noves (ser. Macropetala ser. nova i ser. Balansae ser. nova. i es proposen dues combinacions noves (D. nanum subsp. alboliliaceum and D. nanum subsp. elongatum.

  5. Begonia hosensis (sect. Reichenheimia, Begoniaceae, a new species from Sarawak, Malaysia

    Directory of Open Access Journals (Sweden)

    Che-Wei Lin

    2014-12-01

    Full Text Available Begonia hosensis, a new species of sect. Reichenheimia from Sarawak, Malaysia is here described and illustrated. Begonia hosensis resembles B. andersonii, differing in the stipule prominently keeled and female flower 5- (vs. 4- tepaled. Ecologically, the two species are also separable: B. hosensis occurs on granitic cliffs ca. 400 km east of Kuching, the only known locality of B. andersonii, a limestone species.

  6. Phylogeny and biogeography of Primula sect. Armerina: implications for plant evolution under climate change and the uplift of the Qinghai-Tibet Plateau.

    Science.gov (United States)

    Ren, Guangpeng; Conti, Elena; Salamin, Nicolas

    2015-08-16

    The historical orogenesis and associated climatic changes of mountain areas have been suggested to partly account for the occurrence of high levels of biodiversity and endemism. However, their effects on dispersal, differentiation and evolution of many groups of plants are still unknown. In this study, we examined the detailed diversification history of Primula sect. Armerina, and used biogeographic analysis and macro-evolutionary modeling to investigate a series of different questions concerning the evolution of the geographical and ecological distribution of the species in this section. We sequenced five chloroplast and one nuclear genes for species of Primula sect. Armerina. Neither chloroplast nor nuclear trees support the monophyly of the section. The major incongruences between the two trees occur among closely related species and may be explained by hybridization. Our dating analyses based on the chloroplast dataset suggest that this section began to diverge from its relatives around 3.55 million years ago, largely coinciding with the last major uplift of the Qinghai-Tibet Plateau (QTP). Biogeographic analysis supports the origin of the section in the Himalayan Mountains and dispersal from the Himalayas to Northeastern QTP, Western QTP and Hengduan Mountains. Furthermore, evolutionary models of ecological niches show that the two P. fasciculata clades have significantly different climatic niche optima and rates of niche evolution, indicating niche evolution under climatic changes and further providing evidence for explaining their biogeographic patterns. Our results support the hypothesis that geologic and climatic events play important roles in driving biological diversification of organisms in the QTP area. The Pliocene uplift of the QTP and following climatic changes most likely promoted both the inter- and intraspecific divergence of Primula sect. Armerina. This study also illustrates how niche evolution under climatic changes influences biogeographic

  7. Phenylpropanoid glycosides in Italian Orobanche spp., sect. Orobanche.

    Science.gov (United States)

    Serafini, M; Corazzi, G; Poli, F; Piccin, A; Tomassini, L; Foddai, S

    2005-09-01

    We studied the occurrence of phenylpropanoid glycosides (PhG) in five species of the genus Orobanche L., collected in the Latium region of Italy. The presence of orobanchoside and verbascoside in all four species confirms that these PhGs are taxonomic markers of the genus. The results suggest that O. gracilis form. citrina could be a diverse entity.

  8. Taxonomic revision of the tropical African group of Carex subsect. Elatae (sect. Spirostachyae, Cyperaceae

    Directory of Open Access Journals (Sweden)

    Escudero, Marcial

    2011-12-01

    Full Text Available The tropical African monophyletic group of Carex subsect. Elatae (sect. Spirostachyae is distributed in continental tropical Africa, Madagascar, the Mascarene archipelago, and Bioko Island (32 km off the coast of West Africa, in the Gulf of Guinea. The first monographic treatment of this Carex group, as well as of the tribe Cariceae, was published by Kükenthal (as sect. Elatae Kük.. Recently, the first molecular (nrDNA, cpDNA phylogeny of Carex sect. Elatae has been published, which also included the species of sect. Spirostachyae. In the resulting consensus trees, most species of sect. Elatae were embedded within core Spirostachyae and so this section was joined with sect. Spirostachyae as subsect. Elatae. Within subsect. Elatae, several groups were described, one of which was termed the “tropical African group”. Here we present a taxonomic revision of this group, based on more than 280 vouchers from 29 herbaria as well as in field trips in Tropical Africa. In the revision, we recognise 12 species (16 taxa within the tropical African group, and so have somewhat modified our previous view, in which 10 species, 12 taxa were listed. One new species from Tanzania is included in this treatment, C. uluguruensis Luceño & M. Escudero. Several combinations are made, C. cyrtosaccus is treated as a synonym of C. vallis-rosetto and, finally, the binomial C. greenwayi has been recognised.Las especies de la subsección Elatae (sección Spirostachyae del género Carex que se distribuyen por África tropical continental, Madagascar, el archipiélago de las Mascareñas y la isla de Bioko (a 32 km del litoral de África occidental, en el golfo de Guinea forman un grupo monofilético. El primer tratamiento taxonómico de este grupo de cárices, así como de la tribu Cariceae en su conjunto, fue elaborado por Kükenthal (sección Elatae Kük.; recientemente, se ha publicado el primer estudio de filogenia molecular (nrDNA, cpDNA de los táxones de este grupo

  9. Are white evangelical Protestants lower class? A partial test of church-sect theory.

    Science.gov (United States)

    Schwadel, Philip

    2014-07-01

    Testing hypotheses derived from church-sect theory and contemporary research about changes in evangelical Protestants' social status, I use repeated cross-sectional survey data spanning almost four decades to examine changes in the social-class hierarchy of American religious traditions. While there is little change in the social-class position of white evangelical Protestants from the early 1970s to 2010, there is considerable change across birth cohorts. Results from hierarchical age-period-cohort models show: (1) robust, across-cohort declines in social-class differences between white evangelical Protestants and liberal Protestants, affiliates of "other" religions, and the unaffiliated, (2) stability in social-class differences between white evangelical Protestants and moderate, Pentecostal, and nondenominational Protestants, (3) moderate across-cohort growth in social-class differences between white evangelical Protestants and Catholics, and (4) these patterns vary across indicators of social class. The findings in this article provide partial support for church-sect theory as well as other theories of social change that emphasize the pivotal role of generations. Copyright © 2014 Elsevier Inc. All rights reserved.

  10. SU-E-J-136: Investigation Into Robustness of Stopping Power Calculated by DECT and SECT for Proton Therapy Treatment Planning

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, J [University of Adelaide, Adelaide, SA (Australia); Penfold, S [University of Adelaide, Adelaide, SA (Australia); Royal Adelaide Hospital, Adelaide, SA (Australia)

    2015-06-15

    Purpose: To investigate the robustness of dual energy CT (DECT) and single energy CT (SECT) proton stopping power calibration techniques and quantify the associated errors when imaging a phantom differing in chemical composition to that used during stopping power calibration. Methods: The CIRS tissue substitute phantom was scanned in a CT-simulator at 90kV and 140kV. This image set was used to generate a DECT proton SPR calibration based on a relationship between effective atomic number and mean excitation energy. A SECT proton SPR calibration based only on Hounsfield units (HUs) was also generated. DECT and SECT scans of a second phantom of known density and chemical composition were performed. The SPR of the second phantom was calculated with the DECT approach (SPR-DECT),the SECT approach (SPR-SECT) and finally the known density and chemical composition of the phantom (SPR-ref). The DECT and SECT image sets were imported into the Pinnacle{sup 3} research release of proton therapy treatment planning. The difference in dose when exposed to a common pencil beam distribution was investigated. Results: SPR-DECT was found to be in better agreement with SPR-ref than SPR- SECT. The mean difference in SPR for all materials was 0.51% for DECT and 6.89% for SECT. With the exception of Teflon, SPR-DECT was found to agree with SPR-ref to within 1%. Significant differences in calculated dose were found when using the DECT image set or the SECT image set. Conclusion: The DECT calibration technique was found to be more robust to situations in which the physical properties of the test materials differed from the materials used during SPR calibration. Furthermore, it was demonstrated that the DECT and SECT SPR calibration techniques can Result in significantly different calculated dose distributions.

  11. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    Hvelplund, Frede Kloster; Lund, Henrik; Sukkumnoed, Decharut

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  12. Systematics of the southern African genus Ixia (Iridaceae: Crocoideae: 4. Revision of sect. Dichone

    Directory of Open Access Journals (Sweden)

    P. Goldblatt

    2012-12-01

    Full Text Available The southern African genus Ixia L. comprises ± 90 species from the winter-rainfall zone of the subcontinent. Ixia sect. Dichone (Salisb. ex Baker Goldblatt & J.C.Manning, one of four sections in the genus and currently including 10 species and three varieties, is distinguished by the following floral characters: lower part of the perianth tube filiform and tightly clasping the style; filaments not decurrent; upper part of the perianth tube short to vestigial; style branches involute-tubular and stigmatic only at the tips; and so-called subdidymous anthers. We review the taxonomy of the section, providing complete descriptions and distribution maps, and a key to the species. I. amethystina Manning & Goldblatt is recognized to be a later synonym of I. brevituba G.J.Lewis. Most collections currently included under that name represent another species, here described as I. rigida. We recognize five additional species in the section: early summer-blooming I. altissima from the Cedarberg; I. bifolia from the Caledon District; I. flagellaris, a stoloniferous species from the Cedarberg; I. simulans from the western Langeberg; and I. tenuis from the Piketberg. We also raise to species rank I. micrandra var. confusa and var. minor, as I. confusa and I. minor respectively. Foliar and associated floral variation in the widespread I. scillaris has led us to recognize two new subspecies among its northern populations, broad leaved subsp. latifolia and the dwarfed, smaller flowered subsp. toximontana; subsp. scillaris is restricted to the immediate southwestern Cape, from Darling to Somerset West. Sect. Dichone now has 17 species and two subspecies.

  13. Nuclear medicine technology study guide

    CERN Document Server

    Patel, Dee

    2011-01-01

    Nuclear Medicine Technology Study Guide presents a comprehensive review of nuclear medicine principles and concepts necessary for technologists to pass board examinations. The practice questions and content follow the guidelines of the Nuclear Medicine Technology Certification Board (NMTCB) and American Registry of Radiological Technologists (ARRT), allowing test takers to maximize their success in passing the examinations. The book is organized by sections of increasing difficulty, with over 600 multiple-choice questions covering all areas of nuclear medicine, including radiation safety; radi

  14. Study of Membrane Reflector Technology

    Science.gov (United States)

    Knapp, K.; Hedgepeth, J.

    1979-01-01

    Very large reflective surfaces are required by future spacecraft for such purposes as solar energy collection, antenna surfaces, thermal control, attitude and orbit control with solar pressure, and solar sailing. The performance benefits in large membrane reflector systems, which may be derived from an advancement of this film and related structures technology, are identified and qualified. The results of the study are reported and summarized. Detailed technical discussions of various aspects of the study are included in several separate technical notes which are referenced.

  15. Danish Approaches in Social Studies of Technology

    DEFF Research Database (Denmark)

    Munch, Birgitte

    1995-01-01

    Danish contribution to a EU-COST A4 action analysing the emergence of social studies of technology, the Science-Technology-Society field and the 'new sociology' of technology in Europe.......Danish contribution to a EU-COST A4 action analysing the emergence of social studies of technology, the Science-Technology-Society field and the 'new sociology' of technology in Europe....

  16. Multiple and asymmetrical origin of polyploid dog rose hybrids (Rosa L. sect. Caninae (DC.) Ser.) involving unreduced gametes.

    Science.gov (United States)

    Herklotz, V; Ritz, C M

    2017-08-01

    Polyploidy and hybridization are important factors for generating diversity in plants. The species-rich dog roses ( Rosa sect. Caninae ) originated by allopolyploidy and are characterized by unbalanced meiosis producing polyploid egg cells (usually 4 x ) and haploid sperm cells (1 x ). In extant natural stands species hybridize spontaneously, but the extent of natural hybridization is unknown. The aim of the study was to document the frequency of reciprocal hybridization between the subsections Rubigineae and Caninae with special reference to the contribution of unreduced egg cells (5 x ) producing 6 x offspring after fertilization with reduced (1 x ) sperm cells. We tested whether hybrids arose by independent multiple events or via a single or few incidences followed by a subsequent spread of hybrids. Population genetics of 45 mixed stands of dog roses across central and south-eastern Europe were analysed using microsatellite markers and flow cytometry. Hybrids were recognized by the presence of diagnostic alleles and multivariate statistics were used to display the relationships between parental species and hybrids. Among plants classified to subsect. Rubigineae , 32 % hybridogenic individuals were detected but only 8 % hybrids were found in plants assigned to subsect. Caninae . This bias between reciprocal crossings was accompanied by a higher ploidy level in Rubigineae hybrids, which originated more frequently by unreduced egg cells. Genetic patterns of hybrids were strongly geographically structured, supporting their independent origin. The biased crossing barriers between subsections are explained by the facilitated production of unreduced gametes in subsect. Rubigineae . Unreduced egg cells probably provide the highly homologous chromosome sets required for correct chromosome pairing in hybrids. Furthermore, the higher frequency of Rubigineae hybrids is probably influenced by abundance effects because the plants of subsect. Caninae are much more abundant

  17. NASA Earth Science Mission Control Center Enterprise Emerging Technology Study Study (MCC Technology Study)

    Science.gov (United States)

    Smith, Dan; Horan, Stephen; Royer, Don; Sullivan, Don; Moe, Karen

    2015-01-01

    This paper reports on the results of the study to identify technologies that could have a significant impact on Earth Science mission operations when looking out at the 5-15 year horizon (through 2025). The potential benefits of the new technologies will be discussed, as well as recommendations for early research and development, prototyping, or analysis for these technologies.

  18. Conceptual Thermal Treatment Technologies Feasibility Study

    International Nuclear Information System (INIS)

    Suer, A.

    1996-01-01

    This report presents a conceptual Thermal Treatment Technologies Feasibility Study (FS) for the Savannah River Site (SRS) focusing exclusively on thermal treatment technologies for contaminated soil, sediment, or sludge remediation projects

  19. Technology geography: studying the relationships between technology, location and productivity

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2006-01-01

    Operations management, international management, public policy and economic geography are scientific areas which come together in the study of international technology transfer. This study shows how each of these areas has its own central issues but also has specific parts that are relevant for

  20. Technological innovation in neurosurgery: a quantitative study.

    Science.gov (United States)

    Marcus, Hani J; Hughes-Hallett, Archie; Kwasnicki, Richard M; Darzi, Ara; Yang, Guang-Zhong; Nandi, Dipankar

    2015-07-01

    Technological innovation within health care may be defined as the introduction of a new technology that initiates a change in clinical practice. Neurosurgery is a particularly technology-intensive surgical discipline, and new technologies have preceded many of the major advances in operative neurosurgical techniques. The aim of the present study was to quantitatively evaluate technological innovation in neurosurgery using patents and peer-reviewed publications as metrics of technology development and clinical translation, respectively. The authors searched a patent database for articles published between 1960 and 2010 using the Boolean search term "neurosurgeon OR neurosurgical OR neurosurgery." The top 50 performing patent codes were then grouped into technology clusters. Patent and publication growth curves were then generated for these technology clusters. A top-performing technology cluster was then selected as an exemplar for a more detailed analysis of individual patents. In all, 11,672 patents and 208,203 publications related to neurosurgery were identified. The top-performing technology clusters during these 50 years were image-guidance devices, clinical neurophysiology devices, neuromodulation devices, operating microscopes, and endoscopes. In relation to image-guidance and neuromodulation devices, the authors found a highly correlated rapid rise in the numbers of patents and publications, which suggests that these are areas of technology expansion. An in-depth analysis of neuromodulation-device patents revealed that the majority of well-performing patents were related to deep brain stimulation. Patent and publication data may be used to quantitatively evaluate technological innovation in neurosurgery.

  1. A study on the nuclear technology policy

    International Nuclear Information System (INIS)

    Kim, H. J.; Oh, K. B.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, Ik

    2005-01-01

    This study was conducted as a part of institutional activities of KAERI, and the objective of the study is to survey and analyze the change of international environment in nuclear use and research and development environment, and to propose systematic alternatives on technology policy for efficiency and effectiveness of research and development through national R and D program while timely responding to the environmental change in local and global sense. Acknowledging the importance of the relationship between the external environment and the national nuclear R and D strategic planning for changing of environment of surrounding nuclear technology and development in the world, this study focused on the three major subjects: (1) investigation and analysis of international nuclear environmental and technological change; (2) developing nuclear R and D strategy based on the analysis of national and global environment surrounding nuclear technology development and diffusion; (3) the evaluation of role of nuclear technology and environment from the point of views of environmental effects. In order to enhance the role of national nuclear R and D program and to cope with the environmental and technological change surrounding nuclear energy, it is recommended that active participation should be done in ongoing international collaboration on future innovative nuclear technology for absorption of advanced technologies and strategic R and D planning should be centered on core technology field based on long-term vision and suggested NuTRM considering future energy-environmental surroundings for maximized use of domestic technology capabilities and resources

  2. A Study on the Nuclear Technology Policy

    International Nuclear Information System (INIS)

    Oh, K. B.; Lee, K. S.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, I.; Lee, J. H.

    2007-02-01

    The objective of the study was to make policy-proposals for enhancing the effectiveness and efficiency of national nuclear technology R and D programs. To do this, environmental changes of international nuclear energy policy and trends of nuclear technology development were surveyed and analyzed. This Study analyzed trends of nuclear technology policies and developed the nuclear energy R and D innovation strategy in a viewpoint of analyzing the changes in the global policy environment associated with nuclear technology development and development of national nuclear R and D strategy

  3. Refuge Begonias : taxonomy, phylogeny and historical biogeography of Begonia sect. Loasibegonia and sect. Scutobegonia in relation to glacial rain forest refuges in Africa

    NARCIS (Netherlands)

    Sosef, M.S.M.

    1994-01-01

    Begonia is a genus of + 1000 species and is represented in all tropical areas. In Wageningen, under the guidance of dr J.J.F.E. de Wilde, the continental African begonias are being studied. Continental Africa has some 120

  4. Technological advances for studying human behavior

    Science.gov (United States)

    Roske-Hofstrand, Renate J.

    1990-01-01

    Technological advances for studying human behavior are noted in viewgraph form. It is asserted that performance-aiding systems are proliferating without a fundamental understanding of how they would interact with the humans who must control them. Two views of automation research, the hardware view and the human-centered view, are listed. Other viewgraphs give information on vital elements for human-centered research, a continuum of the research process, available technologies, new technologies for persistent problems, a sample research infrastructure, the need for metrics, and examples of data-link technology.

  5. Communication Technology Use and Study Skills

    Science.gov (United States)

    Thompson, Penny

    2017-01-01

    Research suggests a negative relationship between frequent use of communication technologies, such as text messaging and social network sites, and academic performance, but the nature of the relationship needs to be explored in greater detail. This study explored the relationship between use of communication technologies and self-reported study…

  6. Article 74 sect. 1 no. 24 (air pollution control) as a competent fundament for Renewable Energy Resources Act and thermal energy law; Art. 74 Abs. Nr. 24 GG (Luftreinhaltung) als Kompetenzgrundlage fuer EEG und EEWaermeG

    Energy Technology Data Exchange (ETDEWEB)

    Soesemann, F. [Kammergericht, Berlin (Germany); Humboldt-Univ. Berlin (Germany); Ecologic gGmbH, Berlin (Germany)

    2008-08-15

    Since the reform of federalism, no examination of requirement is necessary in accordance with article 72 sect. 2 Basic Law in order to support federal laws on article 74 sect. 1 no. 24 Basic Law. It is in the interest of the federal law giver to legislate the climate protection such as Renewable Energy Resources Act and thermal energy law alone on the basis of the authority standard in order to avoid the examination of requirement. In the sense of the article 74 sect. 1 no. 24 Basic Law, the climate protection is considered as air pollution control and serves to the reduction of greenhouse gases.

  7. Small Transport Aircraft Technology /STAT/ Propulsion Study

    Science.gov (United States)

    Heldenbrand, R. W.; Baerst, C. F.; Rowse, J. H.

    1980-01-01

    The NASA Small Transport Aircraft Technology (STAT) Propulsion Study was established to identify technology requirements and define the research and development required for new commuter aircraft. Interim results of the studies defined mission and design characteristics for 30- and 50-passenger aircraft. Sensitivities were defined that relate changes in engine specific fuel consumption (SFC), weight, and cost (including maintenance) to changes in the aircraft direct operating cost (DOC), takeoff gross weight, and empty weight. A comparison of performance and economic characteristics is presented between aircraft powered by 1980 production engines and those powered by a 1990 advanced technology baseline engine.

  8. Study on LOMI decontamination technology

    International Nuclear Information System (INIS)

    Huang Fuduan; Yu Degui; Lu Jingju; Xie Yinyan

    1993-10-01

    The results of decontamination technique of Low-Oxidation-State Metal-Ion (LOMI) reagents developed from 1986 to 1991 in the laboratory are introduced. The experiments included preparation of LOMI reagents, de-filming efficiency, corrosion behavior of typical alloys, decontamination factors of reagents for contaminated materials and components have proved that the NP/LOMI decontamination method and treatment technique of waste water are feasible and have some advantages. The preparation of LOMI reagent with low concentration of formic acid by reduced pressure distilling technique and the utilization ratio of vanadium reached to 95% by second electrolysis are the main contributions of the study to the decontamination technique

  9. Mapping Translation Technology Research in Translation Studies

    DEFF Research Database (Denmark)

    Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

    2017-01-01

    section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation......Due to the growing uptake of translation technology in the language industry and its documented impact on the translation profession, translation students and scholars need in-depth and empirically founded knowledge of the nature and influences of translation technology (e.g. Christensen....../Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...

  10. New Technologies for Studying Biofilms

    Science.gov (United States)

    FRANKLIN, MICHAEL J.; CHANG, CONNIE; AKIYAMA, TATSUYA; BOTHNER, BRIAN

    2016-01-01

    Bacteria have traditionally been studied as single-cell organisms. In laboratory settings, aerobic bacteria are usually cultured in aerated flasks, where the cells are considered essentially homogenous. However, in many natural environments, bacteria and other microorganisms grow in mixed communities, often associated with surfaces. Biofilms are comprised of surface-associated microorganisms, their extracellular matrix material, and environmental chemicals that have adsorbed to the bacteria or their matrix material. While this definition of a biofilm is fairly simple, biofilms are complex and dynamic. Our understanding of the activities of individual biofilm cells and whole biofilm systems has developed rapidly, due in part to advances in molecular, analytical, and imaging tools and the miniaturization of tools designed to characterize biofilms at the enzyme level, cellular level, and systems level. PMID:26350329

  11. Elisa technology consolidation study overview

    Science.gov (United States)

    Fitzsimons, E. D.; Brandt, N.; Johann, U.; Kemble, S.; Schulte, H.-R.; Weise, D.; Ziegler, T.

    2017-11-01

    The eLISA (evolved Laser Interferometer Space Antenna) mission is an ESA L3 concept mission intended to detect and characterise gravitational radiation emitted from astrophysical sources [1]. Current designs for eLISA [2] are based on the ESA study conducted in 2011 to reformulate the original ESA/NASA LISA concept [3] into an ESA-only L1 candidate named NGO (New Gravitational Observatory) [4]. During this brief reformulation period, a number of significant changes were made to the baseline LISA design in order to create a more costeffective mission. Some of the key changes implemented during this reformulation were: • A reduction in the inter satellite distance (the arm length) from 5 Gm to 1 Gm. • A reduction in the diameter of the telescope from 40 cm to 20 cm. • A reduction in the required laser power by approximately 40%. • Implementation of only 2 laser arms instead of 3. Many further simplifications were then enabled by these main design changes including the elimination of payload items in the two spacecraft (S/C) with no laser-link between them (the daughter S/C), a reduction in the size and complexity of the optical bench and the elimination of the Point Ahead Angle Mechanism (PAAM), which corrects for variations in the pointing direction to the far S/C caused by orbital dynamics [4] [5]. In the run-up to an L3 mission definition phase later in the decade, it is desirable to review these design choices and analyse the inter-dependencies and scaling between the key mission parameters with the goal of better understanding the parameter space and ensuring that in the final selection of the eLISA mission parameters the optimal balance between cost, complexity and science return can be achieved.

  12. A Study on the Nuclear Technology Policy

    International Nuclear Information System (INIS)

    Lim, C. Y.; Lee, K. S.; Jeong, I.; Lee, J. H.

    2009-04-01

    The objective of the study was to make policy-proposes for enhancing the effectiveness and efficiency of national nuclear technology development programs. To do this, recent changes of international nuclear energy policy and trends of nuclear technology R and D was surveyed and analyzed. In the viewpoint of analysis of the changes in the global policy surrounding nuclear technology development and development of national nuclear R and D strategy, this study (1) analyzed the trends of nuclear technology policies and (2) discussed the mid and long term strategy of nuclear energy R and D. To put it in more detail, each subject was further explored as follows; (1) analyzed the trends of nuclear technology policies - Trend and prospects of the international and domestic nuclear policies - Investigation of development of small and medium sized policies - International collaboration for advanced nuclear technologies (2) discussed the mid and long term strategy of nuclear energy R and D - The long term development plan for future nuclear energy system - The facilitation of technology commercialization

  13. A Study on Nuclear Technology Policy

    International Nuclear Information System (INIS)

    Oh, K. B.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, Ik; Lee, J. H.

    2006-02-01

    This study was conducted as a part of institutional activities of KAERI, and the objective of the study is to survey and analyze the change of international environment in nuclear use and research and development environment, and to propose systematic alternatives on technology policy for efficiency and effectiveness of research and development through national R and D program while timely responding to the environmental change in local and global sense. In the investigation and analysis of international environmental and technological change 1. Viability of Nuclear Renaissance 2. Recent of Nuclear Technology Policy in Japan 3. Collaboration for Advanced Nuclear Technologies in GIF, INPRO and INERI 4. Nuclear Energy Utilization and Development in Europe. In the evaluation of nuclear technology and sustainable development from the point of views of environmental change 5. External Cost of Environmental Impact in Electric Power Sector 6. Nuclear Technology Development Direction Considering Changes of the Science and Technology Policy Environment 7. Nuclear Energy Development Strategy for a Sustainable National Energy Supply

  14. A Study on Nuclear Technology Policy

    Energy Technology Data Exchange (ETDEWEB)

    Oh, K B; Chung, W S; Lee, T J; Yun, S W; Jeong, Ik; Lee, J H

    2006-02-15

    This study was conducted as a part of institutional activities of KAERI, and the objective of the study is to survey and analyze the change of international environment in nuclear use and research and development environment, and to propose systematic alternatives on technology policy for efficiency and effectiveness of research and development through national R and D program while timely responding to the environmental change in local and global sense. In the investigation and analysis of international environmental and technological change 1. Viability of Nuclear Renaissance 2. Recent of Nuclear Technology Policy in Japan 3. Collaboration for Advanced Nuclear Technologies in GIF, INPRO and INERI 4. Nuclear Energy Utilization and Development in Europe. In the evaluation of nuclear technology and sustainable development from the point of views of environmental change 5. External Cost of Environmental Impact in Electric Power Sector 6. Nuclear Technology Development Direction Considering Changes of the Science and Technology Policy Environment 7. Nuclear Energy Development Strategy for a Sustainable National Energy Supply.

  15. Creating Educational Technology Curricula for Advanced Studies in Learning Technology

    Directory of Open Access Journals (Sweden)

    Minoru Nakayama

    2016-08-01

    Full Text Available Curriculum design and content are key factors in the area of human resource development. To examine the possibility of using a collaboration of Human Computer Interaction (HCI and Educational Technology (ET to develop innovative improvements to the education system, the curricula of these two areas of study were lexically analyzed and compared. As a further example, the curriculum of a joint course in HCI and ET was also lexically analyzed and the contents were examined. These analyses can be used as references in the development of human resources for use in advanced learning environments.

  16. Tokamak Engineering Technology Facility scoping study

    Energy Technology Data Exchange (ETDEWEB)

    Stacey, W.M. Jr.; Abdou, M.A.; Bolta, C.C.

    1976-03-01

    A scoping study for a Tokamak Engineering Technology Facility (TETF) is presented. The TETF is a tokamak with R = 3 m and I/sub p/ = 1.4 MA based on the counterstreaming-ion torus mode of operation. The primary purpose of TETF is to demonstrate fusion technologies for the Experimental Power Reactor (EPR), but it will also serve as an engineering and radiation test facility. TETF has several technological systems (e.g., superconducting toroidal-field coil, tritium fuel cycle, impurity control, first wall) that are prototypical of EPR.

  17. Tokamak Engineering Technology Facility scoping study

    International Nuclear Information System (INIS)

    Stacey, W.M. Jr.; Abdou, M.A.; Bolta, C.C.

    1976-03-01

    A scoping study for a Tokamak Engineering Technology Facility (TETF) is presented. The TETF is a tokamak with R = 3 m and I/sub p/ = 1.4 MA based on the counterstreaming-ion torus mode of operation. The primary purpose of TETF is to demonstrate fusion technologies for the Experimental Power Reactor (EPR), but it will also serve as an engineering and radiation test facility. TETF has several technological systems (e.g., superconducting toroidal-field coil, tritium fuel cycle, impurity control, first wall) that are prototypical of EPR

  18. Mapping Translation Technology Research in Translation Studies

    DEFF Research Database (Denmark)

    Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

    2017-01-01

    /Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...... section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation...... technology research as a subdiscipline of TS, and we define and discuss some basic concepts and models of the field that we use in the rest of the paper. Based on a small-scale study of papers published in TS journals between 2006 and 2016, Section 3 attempts to map relevant developments of translation...

  19. Communication technologies in the study environment

    DEFF Research Database (Denmark)

    Thorhauge, Anne Mette

    2012-01-01

    will argue that the ways in which these technologies are used reflects two different perspectives on the interplay between communication technology and organisational structure: organisational structure as an anticipation of communication patterns implied in course management system’s design......In this article, I will analyse and discuss two qualitative case studies concerning ICT in the study environment at the University of Copenhagen, Denmark. I will place special focus on the way in which organisational perspectives as well as technological affordances shape how communication...... technologies are integrated into organisational structures and practices on campus. This involves a comparison between course management systems on the one hand and students’ personal media (mobile phones, e-mails) on the other hand, with regard to how these are used on campus. On the basis of this analysis, I...

  20. The handbook of science and technology studies

    CERN Document Server

    Fouché, Rayvon; Miller, Clark A; Smith-Doerr, Laurel

    2017-01-01

    Science and Technology Studies (STS) is a flourishing interdisciplinary field that examines the transformative power of science and technology to arrange and rearrange contemporary societies. The Handbook of Science and Technology Studies provides a comprehensive and authoritative overview of the field, reviewing current research and major theoretical and methodological approaches in a way that is accessible to both new and established scholars from a range of disciplines. This new edition, sponsored by the Society for Social Studies of Science, is the fourth in a series of volumes that have defined the field of STS. It features 36 chapters, each written for the fourth edition, that capture the state of the art in a rich and rapidly growing field. One especially notable development is the increasing integration of feminist, gender, and postcolonial studies into the body of STS knowledge. The book covers methods and participatory practices in STS research; mechanisms by which knowledge, people, and societies ...

  1. A Study on the Nuclear Technology Policy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. J.; Lim, C. Y.; Yang, M. H. (and others)

    2008-03-15

    The objective of the study was to make policy-proposes for enhancing the effectiveness and efficiency of national nuclear technology development programs. To do this, changes of international nuclear energy policy environment and trends of nuclear technology development was surveyed and analyzed. In the viewpoint of analysis of the changes in the global policy environment surrounding nuclear technology development and development of national nuclear R and D strategy, this study (1) analyzed trends of nuclear technology policies and (2) developed the nuclear energy R and D innovation strategies. To put it in more detail, each subject was further explored as follows; (1) themes to analyze trends of nuclear policies: nuclear Renaissance and forecast for nuclear power plant, International collaboration for advanced nuclear technologies in GIF, INPRO and I-NERI, The present situation and outlook for world uranium market (2) themes to develop of nuclear energy R and D innovation strategies: The mid-term strategy plan of the KAERI, The technological innovation case of the KAERI.

  2. A Study on the Nuclear Technology Policy

    International Nuclear Information System (INIS)

    Kim, H. J.; Lim, C. Y.; Yang, M. H.

    2008-03-01

    The objective of the study was to make policy-proposes for enhancing the effectiveness and efficiency of national nuclear technology development programs. To do this, changes of international nuclear energy policy environment and trends of nuclear technology development was surveyed and analyzed. In the viewpoint of analysis of the changes in the global policy environment surrounding nuclear technology development and development of national nuclear R and D strategy, this study (1) analyzed trends of nuclear technology policies and (2) developed the nuclear energy R and D innovation strategies. To put it in more detail, each subject was further explored as follows; (1) themes to analyze trends of nuclear policies: nuclear Renaissance and forecast for nuclear power plant, International collaboration for advanced nuclear technologies in GIF, INPRO and I-NERI, The present situation and outlook for world uranium market (2) themes to develop of nuclear energy R and D innovation strategies: The mid-term strategy plan of the KAERI, The technological innovation case of the KAERI

  3. A study on the nuclear technology policy

    International Nuclear Information System (INIS)

    Yang, M. H.; Kim, H. J.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, Ik

    2002-01-01

    This study was carried out as a part of institutional activities of KAERI. This study suggested the effective and systematic alternatives for the development of domestic industry through nuclear long-term R and D program while timely responding to the environmental change in local and global sense. First of all, this study investigated the current status and prospect of nuclear power supply, the global technological change of nuclear fuel cycle, the nuclear policy changes of major countries and the role of nuclear energy in East Asian countries. Second, some policy alternatives are suggested in association with the role of national R and D in enhancing industrial competitiveness, the effective management of nuclear long-term R and D program to facilitate technological innovation and the way to enlarge the utilization of nuclear R and D results and radiation technology

  4. Soutien institutionnel à African Technology Policy Studies ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Au départ la division tanzanienne du Réseau d'études sur la politique technologique en Afrique (African Technology Policy Studies Network), et ce, depuis 1984, ATPS-Tanzania est devenu autonome à titre d'organisation non gouvernementale en 2001. Lorsque ATPS-Tanzania recevait un financement stable du siège de ...

  5. Study of Faculty and Information Technology, 2014

    Science.gov (United States)

    Dahlstrom, Eden; Brooks, D. Christopher

    2014-01-01

    In this inaugural year of the faculty technology study, EDUCAUSE Center for Analysis and Research (ECAR) partnered with 151 college/university sites yielding responses from 17,451 faculty respondents across 13 countries. The findings are exploratory in nature, as they cover new ground to help us tell a more comprehensive story about technology…

  6. Institutional Support : African Technology Policy Studies - Tanzania ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    African Technology Policy Studies - Tanzania (ATPS-Tanzania) was registered as a national nongovernmental organization in 2001. ... While resource flows to ATPS-Tanzania from ATPS headquarters in Nairobi were reliable, the organization produced a larger volume of research outputs than most other ATPS national ...

  7. A study on nuclear technology policy

    International Nuclear Information System (INIS)

    Kim, H. J.; Oh, K. B.; Lee, K. S.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, I.

    2004-01-01

    This study was conducted as a part of institutional activities of KAERI, and the objective of the study is to survey and analyze the change of international environment in nuclear use and research and development environment, and to propose systematic alternatives on technology policy for efficiency and effectiveness of research and development through national R and D program while timely responding to the environmental change in local and global sense. Acknowledging the importance of the relationship between the external environment and the national nuclear R and D strategic planning, this study focused on the two major subjects: (1) the international environmental and technological change attached to the development of nuclear power; (2) the direction and strategy of nuclear R and D to improve effectiveness through national R and D programs as role of electricity in the future society, strategic environment of nuclear use and R and D in the future society, energy environment and nuclear technology development scenario in the future, strategic study on future vision of KAERI and technological road-mapping of national nuclear R and D for enhancing competitiveness

  8. Developing technology pushed breakthroughs: an empirical study

    Directory of Open Access Journals (Sweden)

    Jari Sarja

    2017-12-01

    Full Text Available Developing a technology push product that brings real novelty to the market is difficult, risky and costly. This case study analyzes success factors defined by the literature. True industrial cases, representing Finnish ICT firms in their early phase after a successful market entry, were researched for the success factor analysis. The whole set of the previously introduced success factors were variably supported, and three new factors arose. Because the technology pushed development processes are risky with high failure rates, the validated success factors are valuable knowledge for the developments intensive firm’s management.

  9. AFCI Safeguards Enhancement Study: Technology Development Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

    2008-12-31

    The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

  10. A Case Study of Technology Choices by High School Students

    Science.gov (United States)

    Owens-Hartman, Amy R.

    2015-01-01

    The purpose of this case study was to examine student technology choices when given the freedom to choose technology devices to complete a project-based learning activity in a content area of study. The study also analyzed factors affecting technology choice as well as how technology proficiency scores aligned to technology choices. Patterns and…

  11. Educational Potential of Case-Study Technology

    OpenAIRE

    Fedorinova, Zoya; Vorobeva, Victoria; Malyanova, Marina

    2015-01-01

    This article presents the results of phenomenological and typological analysis of case-study technology educational potential. The definition “educational potential of case-study technology” is given, the main characteristics of which are changed in communication and collaborative activity quality, appearance of educational initiatives, change of participants’ position in learning process, formation of “collective subject” in collaborative activity, increase of learning (subject) results. Dep...

  12. Marked hybridization and introgression in Ophrys sect. Pseudophrys in the western Iberian Peninsula.

    Science.gov (United States)

    Cotrim, Helena; Monteiro, Filipa; Sousa, Eva; Pinto, Manuel J; Fay, Michael F

    2016-04-01

    Orchids in the genus Ophrys represent extraordinary cases of tight coevolution between plants and their pollinators, and as a result, they present opportunities for studying hybridization, or a lack thereof, during speciation. However, few studies assess the real effect of hybridization in diversification. The three most representative species of section Pseudophrys in the western Iberian Peninsula-O. dyris, O. fusca, and O. lutea-were chosen to study evolutionary relationships and examine speciation. Using eight specific nuclear microsatellite loci, 357 individuals from 28 locations were studied; 142 of these samples were also studied with four plastid microsatellite loci. Data were analyzed using Bayesian cluster analysis, a median-joint network, and multivariate analysis. Many O. dyris and O. fusca specimens had three or four alleles and were therefore treated as tetraploid. Ophrys dyris is poorly genetically separated from O. fusca, and pure populations are rare. Ophrys fusca and O. lutea are distinct, but hybrids/introgressed individuals were detected in most of the populations and supported by plastid haplotypes. Ophrys fusca is subdivided into three well-delimited genetic lineages with a strict geographic correspondence confirmed by plastid haplotypes. Because postzygotic barriers are weak, leakage in this highly specialized orchid-pollinator system contributes to hybridization and introgression. These leakages may have occurred during periods of past climate change, promoting homogenization and the potential for generations of new biodiversity via production of novel genotypes/phenotypes interacting with pollinators. © 2016 Botanical Society of America.

  13. Study on construction technology for repository

    International Nuclear Information System (INIS)

    Tanai, Kenji; Iwasa, Kengo; Hasegawa, Hiroshi; Miura, Kazuhiko; Okutsu, Kazuo; Kobayashi, Masaaki

    1999-11-01

    For the construction of underground facilities comprising access tunnels, connecting tunnels, main tunnels and disposal tunnels, a large number of tunnels will be excavated in deep rock formations. These excavations will extend hundreds kilometers in total length. Therefore, special attention must be paid, to transporting large volume of debris, ventilation, emergency escape routes in case of accident, and other factors. In addition, special attention must also paid to potential accidents which might in underground excavations, including unstable facing phenomena (such as collapse and swelling of facing at weak layer sections), spring water flow resulting collapse of rock, gas eruption, and rock burst. While considering these factors to be emphasized during the construction of geological disposal facilities, the investigation reviewed the existing working methods on individual construction technologies of access tunnels, main tunnels, connecting tunnels, disposal tunnels, and disposal pit, based on the recognition that the present state deals with a wide range of geological environments, and conducted investigation about the construction methods for each tunnel on the basis current technologies, and described the outline of these methods. Furthermore, for the items to be particularly emphasized on site characterization and siting data such as ground pressure and spring water, the investigation reviewed the current countermeasure works, and made survey on the phenomena appeared during actual tunnel construction works and their countermeasures, and carried out a study on effectiveness of these countermeasures. This constructing of disposal site in deep geological formations is basically possible by applying, or confirming, current excavation technologies for tunnels and underground facilities. A systematic construction system combines separate technologies relating to construction, (excavation technology, tunnel support work method, etc.). Such systems can be

  14. Proteomic Technologies for the Study of Osteosarcoma

    Directory of Open Access Journals (Sweden)

    Stephanie D. Byrum

    2012-01-01

    Full Text Available Osteosarcoma is the most common primary bone cancer of children and is established during stages of rapid bone growth. The disease is a consequence of immature osteoblast differentiation, which gives way to a rapidly synthesized incompletely mineralized and disorganized bone matrix. The mechanism of osteosarcoma tumorogenesis is poorly understood, and few proteomic studies have been used to interrogate the disease thus far. Accordingly, these studies have identified proteins that have been known to be associated with other malignancies, rather than being osteosarcoma specific. In this paper, we focus on the growing list of available state-of-the-art proteomic technologies and their specific application to the discovery of novel osteosarcoma diagnostic and therapeutic targets. The current signaling markers/pathways associated with primary and metastatic osteosarcoma that have been identified by early-stage proteomic technologies thus far are also described.

  15. A Study of KHNP Nuclear Power Plant Technology Level Evaluation

    International Nuclear Information System (INIS)

    Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han

    2016-01-01

    KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning

  16. A Study of KHNP Nuclear Power Plant Technology Level Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han [KHNP, Daejeon (Korea, Republic of)

    2016-05-15

    KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning.

  17. Technology integration box beam failure study

    Science.gov (United States)

    Shuart, M. J.; Ambur, Damodar R.; Davis, D. D., Jr.; Davis, R. C.; Farley, G. L.; Lotts, C. G.; Wang, J. T.

    1993-01-01

    Composite structures have the potential to be cost-effective, structurally efficient primary aircraft structures. The Advanced Composites Technology (ACT) Program has the goal to develop the technology to exploit this potential for heavily loaded aircraft structures. As part of the ACT Program, Lockheed Aeronautical Systems Company completed the design and fabrication of the Technology Integration Box Beam (TIBB). The TIBB is an advanced composite prototype structure for the center wing section of the C-130 aircraft. Lockheed subjected the TIBB to downbending, upbending, torsion and combined upbending and torsion load conditions to verify the design. The TIBB failed at 83 percent of design ultimate load for the combined upbending and torsion load condition. The objective of this paper is to describe the mechanisms that led to the failure of the TIBB. The results of a comprehensive analytical and experimental study are presented. Analytical results include strain and deflection results from both a global analysis of the TIBB and a local analysis of the failure region. These analytical results are validated by experimental results from the TIBB tests. The analytical and experimental results from the TIBB tests are used to determine a sequence of events that resulted in failure of the TIBB. A potential cause of failure is high stresses in a stiffener runout region. Analytical and experimental results are also presented for a stiffener runout specimen that was used to simulate the TIBB failure mechanisms.

  18. Coal use and coal technology study (KIS)

    International Nuclear Information System (INIS)

    Kram, T.; Okken, P.A.; Gerbers, D.; Lako, P.; Rouw, M.; Tiemersma, D.N.

    1991-11-01

    The title study aims to assess the possible role for coal in the Netherlands energy system in the first decades of the next century and the part new coal conversion technologies will play under various conditions. The conditions considered relate to (sectoral) energy demand derived from national scenarios in an international context, to energy prices, to environmental constraints (acidification, solid waste management and disposal) and to the future role for nuclear power production. Targets for reduction of greenhouse gas emissions are not explicitly included, but resulting CO 2 emissions are calculated for each variant case. The part that coal can play in the Dutch energy supply is calculated and analyzed by means

  19. Reactive membrane technology: Two case studies

    DEFF Research Database (Denmark)

    Zeuner, Birgitte; Luo, Jianquan; Pinelo, Manuel

    2014-01-01

    investigated the effect of applied pressure, enzyme concentration, pH, and membrane properties on fouling-induced enzyme immobilization. In another study, the production of the human milk oligosaccharide 3’-sialyllactose by an engineered sialidase from Trypanosoma rangeli (Tr6) was significantly improved......Enzymatic processes are generally sustainable processes that use mild conditions and natural substrates. Membrane technology can be employed for enzyme immobilization as well as for recycling free enzymes. Using alcohol dehydrogenase (ADH) as part of a process to recycle CO2 to methanol, we...... in an enzymatic membrane reactor. The entire process can be improved by employing a series of ultra- and nanofiltrations....

  20. Elementary Teachers' Experiences with Technology Professional Development and Using Technology in the Classroom: A Case Study

    Science.gov (United States)

    Grizzle, Pamela Lavon

    2016-01-01

    In order for educators to prepare students for technology-enhanced learning educators must first be prepared. The digital divide and technology professional development are two factors impacting the depth at which technology is integrated into the classroom. The local problem addressed in this study was that the impact of technology professional…

  1. Characterizing the technology firm : An exploratory study

    NARCIS (Netherlands)

    Grinstein, A.; Goldman, Arieh

    Technology firms occupy a central position in modern economies. They drive economic growth, productivity gains and have created new industries and innovative products. Many will agree that technology firms are distinguished from others in their emphasis on technological activities. Since this

  2. Reliability studies in a developing technology

    International Nuclear Information System (INIS)

    Mitchell, L.A.; Osgood, C.; Radcliffe, S.J.

    1975-01-01

    The standard methods of reliability analysis can only be applied if valid failure statistics are available. In a developing technology the statistics which have been accumulated, over many years of conventional experience, are often rendered useless by environmental effects. Thus new data, which take account of the new environment, are required. This paper discusses the problem of optimizing the acquisition of these data when time-scales and resources are limited. It is concluded that the most fruitful strategy in assessing the reliability of mechanisms is to study the failures of individual joints whilst developing, where necessary, analytical tools to facilitate the use of these data. The approach is illustrated by examples from the field of tribology. Failures of rolling element bearings in moist, high-pressure carbon dioxide illustrate the important effects of apparently minor changes in the environment. New analytical techniques are developed from a study of friction failures in sliding joints. (author)

  3. A study on nuclear technology policy

    International Nuclear Information System (INIS)

    Yang, M. H.; Kim, H. J.; Chung, W. S.; Yun, S. W.; Kim, H. S.

    2001-01-01

    This study was carried out as a part of institutional activities of KAERI. Major research area are as follows; Future directions and effects for national nuclear R and D to be resulted from restructuring of electricity industry are studied. Comparative study was carried out between nuclear energy and other energy sources from the point of views of environmental effects by introducing life cycle assessment(LCA) method. Japanese trends of reestablishment of nuclear policy such as restructuring of nuclear administration system and long-term plan of development and use of nuclear energy are also investigated, and Russian nuclear development program and Germany trends for phase-out of nuclear electricity generation are also investigated. And trends of the demand and supply of energy in eastern asian countries in from the point of view of energy security and tension in the south china sea are analyzed and investigation of policy trends of Vietnam and Egypt for the development and use of nuclear energy for the promotion of nuclear cooperation with these countries are also carried out. Due to the lack of energy resources and high dependence of imported energy, higher priority should be placed on the use of localized energy supply technology such as nuclear power. In this connection, technological development should be strengthened positively in order to improve economy and safety of nuclear energy and proliferation resistance of nuclear fuel cycle and wide ranged use of radiation and radioisotopes and should be reflected in re-establishment of national comprehensive promotion plan of nuclear energy in progress

  4. A study on nuclear technology policy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, M H; Kim, H J; Chung, W S; Yun, S W; Kim, H S

    2001-01-01

    This study was carried out as a part of institutional activities of KAERI. Major research area are as follows; Future directions and effects for national nuclear R and D to be resulted from restructuring of electricity industry are studied. Comparative study was carried out between nuclear energy and other energy sources from the point of views of environmental effects by introducing life cycle assessment(LCA) method. Japanese trends of reestablishment of nuclear policy such as restructuring of nuclear administration system and long-term plan of development and use of nuclear energy are also investigated, and Russian nuclear development program and Germany trends for phase-out of nuclear electricity generation are also investigated. And trends of the demand and supply of energy in eastern asian countries in from the point of view of energy security and tension in the south china sea are analyzed and investigation of policy trends of Vietnam and Egypt for the development and use of nuclear energy for the promotion of nuclear cooperation with these countries are also carried out. Due to the lack of energy resources and high dependence of imported energy, higher priority should be placed on the use of localized energy supply technology such as nuclear power. In this connection, technological development should be strengthened positively in order to improve economy and safety of nuclear energy and proliferation resistance of nuclear fuel cycle and wide ranged use of radiation and radioisotopes and should be reflected in re-establishment of national comprehensive promotion plan of nuclear energy in progress.

  5. Vacuum Technology in the study of Graphene

    International Nuclear Information System (INIS)

    Ghoshal, A K; Banerjee, S N; Chakraborty, D

    2012-01-01

    Graphene, an allotrope of carbon is a two-dimensional sheet of covalently bonded carbon atoms that has been attracting great attention in the field of electronics. In a recent review graphene is defined as a flat monolayer of carbon atoms tightly packed into a 2-D honeycomb lattice. A survey has been made of the production processes and instrumentation for characterization of graphene. In the production of graphene, the methods mainly used are Epitaxial growth, oxide reduction, growth from metal-carbon melts, growth from sugar. In the characterization of graphene, the instruments that are mainly used to study the atomic properties, electronic properties, optical properties, spin properties are Scanning Electron Microscopy, Transmission Electron Microscopy, Raman Spectroscopy. In all these instruments high or ultra-high vacuum is required. This paper attempts to correlate vacuum technology in the production and characterization of graphene.

  6. Revolutionizing The Run: A Wearable Technology Study

    OpenAIRE

    Lindamood Jr, Stephen Douglas

    2014-01-01

    Recent advances in technology are reshaping and enhancing the role of the industrial designer. While industrial designers are already trained to be experts in process and possess a wide range of skills, there must be a higher level of fusion between design, science, and technology than ever before. This paradigm presents an opportunity in the emerging field of wearable technology; industrial design, engineering and computer science would be an optimal collaboration for the inevitable increase...

  7. Study on underwater plasma arc cutting technology

    International Nuclear Information System (INIS)

    Yada, Toshio; Nakamura, Uhachiro; Tomidokoro, Sakae; Fukuzawa, Mitsuo

    1980-01-01

    The zirconium alloy tube of the impile creep test facility had been subjected to inner pressure in the Japan Material Testing Reactor (JMTR) environment. In the near future, it will be necessary to dismantle the facility and to take out the tube for such examinations as irradiation effects on material properties. In order to establish the dismantling technology for the radioactive facility, a study on underwater plasma arc cutting has been carried out since 1977. Primarily, optimum underwater cutting sequence and conditions were studied in details for developing the remote control handling and the cutting system. Further, the amounts of particles suspended in water as well as those contained in bubbled gas were quantitatively analyzed for developing a safe removal system for contaminants which were produced by cutting the radioactive material. As a result of this study, it has been concluded that the underwater plasma arc cutting method is generally suitable and effective for dismantling such radioactive material as the impile creep test facility of the JMTR. (author)

  8. Cooperation, Technology, and Performance: A Case Study.

    Science.gov (United States)

    Cavanagh, Thomas; Dickenson, Sabrina; Brandt, Suzanne

    1999-01-01

    Describes the CTP (Cooperation, Technology, and Performance) model and explains how it is used by the Department of Veterans Affairs-Veteran's Benefit Administration (VBA) for training. Discusses task analysis; computer-based training; cooperative-based learning environments; technology-based learning; performance-assessment methods; courseware…

  9. Studying Innovation Technologies in Modern Education

    Science.gov (United States)

    Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

    2016-01-01

    In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

  10. Small transport aircraft technology propeller study

    Science.gov (United States)

    Black, B. M.; Magliozzi, B.; Rohrbach, C.

    1983-01-01

    A study to define potential benefits of advanced technology propeller for 1985-1990 STAT commuter airplanes was completed. Two baselines, a Convair, 30 passenger, 0.47 Mach number airplane and a Lockheed, 50 passenger, 0.70 Mach number airplane, were selected from NASA-Ames sponsored airframe contracts. Parametric performance, noise level, weight and cost trends for propellers with varying number of blades, activity factor, camber and diameter incorporating blade sweep, tip proplets, advanced composite materials, advanced airfoils, advanced prevision synchrophasing and counter-rotation are presented. The resulting DOC, fuel burned, empty weight and acquisition cost benefits are presented for resizings of the two baseline airplanes. Six-bladed propeller having advanced composite blades, advanced airfoils, tip proplets and advanced prevision synchrophasers provided the maximum DOC improvements for both airplanes. DOC and fuel burned were reduced by 8.3% and 17.0% respectively for the Convair airplane and by 24.9% and 41.2% respectively for the Lockheed airplane. The larger reductions arose from a baseline definition with very heavy fuselage acoustic treatment. An alternate baseline, with a cabin noise 13dB in excess of the objective, was also studied.

  11. Clarifying the butter Boletes: a new genus, Butyriboletus, is established to accommodate Boletus sect. Appendiculati, and six new species are described.

    Science.gov (United States)

    Arora, David; Frank, Jonathan L

    2014-01-01

    The butter boletes (Boletus s.l. sect. Appendiculati) are an economically important group of ectomycorrhizal fungi whose basidiocarps have a yellow tube layer that often bruises blue, yellow reticulate stipe, mild flavor and firm yellow-tinged flesh that may or may not turn blue when exposed. Morphological characters and molecular data (ITS and LSU) place this group in a separate phylogenetic clade from Boletus sensu stricto. Here we establish a new genus, Butyriboletus, to accommodate 14 species of butter boletes that range from Asia to Europe, north Africa and North America. We recombine eight previously described butter bolete species and we describe six new species: four from western USA (Bu. persolidus, Bu. primiregius, Bu. autumnigius, Bu. querciregius) and two from Yunnan, China (Bu. yicibus, Bu. sanicibus). © 2014 by The Mycological Society of America.

  12. Networking and Information Technology Workforce Study: Final Report

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — This report presents the results of a study of the global Networking and Information Technology NIT workforce undertaken for the Networking and Information...

  13. Electro Thermal Chemical Gun Technology Study

    National Research Council Canada - National Science Library

    Diamond, P

    1999-01-01

    .... Michael Stroscio. Electro Thermal Chemical (ETC) gun technology refers to the use of plasma devices in place of traditional chemical ignitors to initiate the burning of high energy propellants in a controlled manner...

  14. Introduction to the study of solar technology

    Energy Technology Data Exchange (ETDEWEB)

    Touchais, M

    1979-01-01

    The conversion of solar energy to meet the world's energy requirements by means of solar technology is discussed as preface to an introductory course in solar technology. The significance of the energy crisis of 1973 to the development of alternative sources of energy, primarily solar, is considered, and the amount of recoverable solar energy incident on the earth is estimated to be able to supply the world's energy demand. The various means of solar energy conversion, including thermal, chemical in the form of hydrogen or methane, and direct or thermal electrical, are examined, and areas of these technologies requiring further experimental investigation are indicated. Solar technology is presented as the science of the artificial applications of solar energy, with mention of its associated disciplines, and the deficiencies of the solar technology developed prior to the energy crisis are exposed. Goals for contemporary instruction in solar technology are then derived, the introductory course is outlined, and bibliographic references are presented. Differences between the sources of solar and traditional energies are also discussed.

  15. Application study of nuclear technologies for integration chemical, biological and radiological technology

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jae Kon; Han, M. H.; Kim, Y. H.; Yang, J. E.; Jung, K. S.; Cha, H. K.; Moon, J.; La, K. H

    2001-02-01

    The projects are suggested the method to maximize the technology and research results which are being carried out by KAERI on the nuclear field. The study presents 1)the technology to rapidly and accurately determine and the nature of contamination, 2) the technology to predict the spread of contaminant and the magnitude of damage, and 3) the expert-aided decision making technology to identify the optimum counter-measures. And the solutions are also suggested the application to military technology in Chemical, Biological and Radiation field. In addition, I hope this kind of cooperation model come to be the good case of military civilian research harmony to improve the national competition capability.

  16. Cost effectiveness studies of environmental technologies: Volume 1

    International Nuclear Information System (INIS)

    Silva, E.M.; Booth, S.R.

    1994-02-01

    This paper examines cost effectiveness studies of environmental technologies including the following: (1) In Situ Air Stripping, (2) Surface Towed Ordinance Locator System, (3) Ditch Witch Horizontal Boring Technology, (4) Direct Sampling Ion Trap Mass Spectrometer, (5) In Situ Vitrification, (6) Site Characterization and Analysis Penetrometer System, (7) In Situ Bioremediation, and (8) SEAMIST Membrane System Technology

  17. Egyptian Children's Use of Technology: A Phenomenological Study

    Science.gov (United States)

    Morgan, Hani; Lee, Guang-Lea

    2017-01-01

    Although the use of technology can be very important for children younger than age 12 years, not all countries possess the financial resources to make digital resources widely available to students. Children can also use technology inappropriately. This study explores the consequences of exposure to different forms of technology on children. It…

  18. Technologies for the Study of Speech: Review and an Application

    Science.gov (United States)

    Babatsouli, Elena

    2015-01-01

    Technologies used for the study of speech are classified here into non-intrusive and intrusive. The paper informs on current non-intrusive technologies that are used for linguistic investigations of the speech signal, both phonological and phonetic. Providing a point of reference, the review covers existing technological advances in language…

  19. Experimental study on ceramic membrane technology for onboard oxygen generation

    OpenAIRE

    Jiang Dongsheng; Bu Xueqin; Sun Bing; Lin Guiping; Zhao Hongtao; Cai Yan; Fang Ling

    2016-01-01

    The ceramic membrane oxygen generation technology has advantages of high concentration of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT) and pressure d...

  20. Transport Network TechnologiesStudy and Testing

    DEFF Research Database (Denmark)

    Bozorgebrahimi, K.; Channegowda, M.; Colmenero, A.

    Following on from the theoretical research into Carrier Class Transport Network Technologies (CCTNTs) documented in DJ1.1.1, this report describes the extensive testing performed by JRA1 Task 1. The tests covered EoMPLS, Ethernet OAM, Synchronous Ethernet, PBB-TE, MPLS-TP, OTN and GMPLS...

  1. Demonstrating and implementing innovative technologies: Case studies from the USDOE Office of Technology Development

    International Nuclear Information System (INIS)

    Brouns, T.M.; Koegler, K.J.; Mamiya, L.S.

    1995-02-01

    This paper describes elements of success for demonstration, evaluation, and transfer for deployment of innovative technologies for environmental restoration. They have been compiled from lessons learned through the US Department of Energy (DOE) Office of Technology Development's Volatile Organic Compounds in Arid Soil Integrated Demonstration (VOC-Arid ID). The success of the VOC-Arid ID program was determined by the rapid development demonstration, and transfer for deployment of technologies to operational sites that improve on safety, cost, and/or schedule of performance over baseline technologies. The VOC-Arid ID successfully fielded more than 25 innovative technology field demonstrations; several of the technologies demonstrated have been successfully transferred for deployment Field demonstration is a critical element in the successful transfer of innovative technologies into environmental restoration operations. The measures of success for technology demonstrations include conducting the demonstration in a safe and controlled environment and generating the appropriate information by which to evaluate the technology. However, field demonstrations alone do not guarantee successful transfer for deployment There are many key elements throughout the development and demonstration process that have a significant impact on the success of a technology. This paper presents key elements for a successful technology demonstration and transfer for deployment identified through the experiences of the VOC-Arid ID. Also, several case studies are provided as examples

  2. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

  3. A case study of technology transfer: Cardiology

    Science.gov (United States)

    Schafer, G.

    1974-01-01

    Research advancements in cardiology instrumentation and techniques are summarized. Emphasis is placed upon the following techniques: (1) development of electrodes which show good skin compatibility and wearer comfort; (2) contourography - a real time display system for showing the results of EKGs; (3) detection of arteriosclerosis by digital computer processing of X-ray photos; (4) automated, noninvasive systems for blood pressure measurement; (5) ultrasonoscope - a noninvasive device for use in diagnosis of aortic, mitral, and tricuspid valve disease; and (6) rechargable cardiac pacemakers. The formation of a biomedical applications team which is an interdisciplinary team to bridge the gap between the developers and users of technology is described.

  4. Technology-Enhanced Mathematics Education for Creative Engineering Studies

    DEFF Research Database (Denmark)

    Triantafyllou, Eva; Timcenko, Olga

    2014-01-01

    This project explores the opportunities and challenges of integrating digital technologies in mathematics education in creative engineering studies. Students in such studies lack motivation and do not perceive the mathematics the same way as mathematics students do. Digital technologies offer new...... are conceptualized. Then, we are going to apply this field data in designing learning technologies, which will be introduced in university classrooms. The effect of this introduction will be evaluated through educational design experiments....

  5. Effectiveness of Subsidies in Technology Adoption: A Case Study Involving Reverse Osmosis (RO Membrane Technology

    Directory of Open Access Journals (Sweden)

    Nur Laili

    2016-12-01

    Full Text Available Adoption of new technologies is a process that involves technological learning and penetration of new products into the market. Within the process of new technologies adoption, government usually intervened by providing incentives, in order to support the technology adoption to be succeed. This paper examines the effectiveness of incentives for the sustainability of reverse osmosis (RO membrane technology adoption. The study conducted through single case study on SWRO installation in Mandangin Island, East Java, Indonesia. Results of case study indentify the existence of government incentive in the form of direct subsidies to decrease the price of clean water. Although successful in reducing the price of water, but effectiveness of the subsidy on the sustainability of SWRO is still low, which is operates only 30% in a year. Further analysis shows that these subsidies actually be counter-productive to the sustainability of SWRO installation.

  6. Institutional dynamics and technology legitimacy - A framework and a case study on biogas technology

    NARCIS (Netherlands)

    Markard, Jochen; Wirth, Steffen; Truffer, Bernhard

    2016-01-01

    Legitimacy is central for both novel and established technologies to mobilize the resources necessary for growth and survival. A loss of legitimacy, in turn, can have detrimental effects for an industry. In this paper, we study the rise and fall of technology legitimacy of agricultural biogas in

  7. Prehispanic goldwork technology study by PIXE analysis

    Energy Technology Data Exchange (ETDEWEB)

    Zucchiatti, Alessandro, E-mail: alessandro.zucchiatti@uam.es [Centro de Micro Análisis de Materiales, Universidad Autónoma de Madrid, Calle de Faraday 3, Madrid 28049 (Spain); Climent Font, Aurelio [Centro de Micro Análisis de Materiales, Universidad Autónoma de Madrid, Calle de Faraday 3, Madrid 28049 (Spain); Gutierrez Neira, Patricia Carolina; Perea, Alicia [Centro de Ciencias Humanas y Sociales, CSIC, Calle Albasanz 26-28, Madrid 28037 (Spain); Fernandez Esquivel, Patricia [Fundación Museos, Banco Central de Costa Rica, San José (Costa Rica); Rovira Llorens, Salvador [Museo Arqueológico Nacional, Calle Serrano 13, Madrid 28006 (Spain); Ruvalcaba Sil, José Luis [Instituto de Física, Universidad Nacional Autónoma de Mexico, Mexici DF 28006 (Mexico); Verde, Ana [Museo de América, Avda. de los Reyes Católicos 6, Madrid 28040 (Spain)

    2014-08-01

    Technological characterization of pre-Hispanic gold metallurgy has still a wide deficit of analytical data. A set of 103 pieces from the so called “Quimbaya’s treasure” (QT) and the “Costa Rica collection” (CRC) of the Museo de America of Madrid were submitted to IBA analysis (PIXE and RBS) at the CMAM in three phases and the metal composition was determined. Only in a limited number of cases, due to the dramatic erosion of the gilded layer, produced by abrasive cleaning methods applied after the discovery and before the seventies, it was possible to determine also the sequence of layers, which gives information on the manufacture technology and the type and purity of the metals. PIXE results are reported and discussed. Data show that the CRC objects have very high gold levels (>80% in weight) while the QT have a more variable composition with significant Cu levels associated to the so called Tumbaga-alloy. In the cases where polishing had a tolerable effect, PIXE (and RBS), point to depletion gilding as a standard finishing process in the Costa Rica production, resulting in a gold rich surface alloy, while the variable composition of the QT objects may well be linked to deliberate colour choice.

  8. International energy technology collaboration and climate change mitigation. Case study 1. Concentrating Solar Power Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Philibert, C. [Energy and Environment Division, International Energy Agency IEA, Paris (France)

    2004-07-01

    international collaboration by describing the globalisation of the economy and current efforts of technology collaboration and transfer. Finally, it considers various ways to strengthen international energy technology collaboration. This paper is one of six case-studies designed in an effort to provide practical insights on the role international technology collaboration could play to achieve the objectives of the UNFCCC. They will all consider the past achievements of international technology collaboration, and the role it could play in helping to develop and disseminate new technologies in the future: what worked, what did not work and why, and what lessons might be drawn from past experiences. Most case studies consider energy technologies that could help mitigate greenhouse gas emissions. A few others consider areas not directly related to greenhouse gas emissions but where international technology collaboration has proven particularly successful in the past. This case study reviews past and current experience in international collaboration in the field of concentrating solar technologies in order to identify lessons that may be relevant for more general climate-friendly technology collaboration. It presents concentrating solar technologies in their current status, recent achievements and development prospects. It analyses the present successes and failures of different forms of international collaboration in this field, and draws lessons for further elaboration of international technology collaboration in addressing climate change.

  9. Information Technology Diffusion: A Comparative Case Study of Intranet Adoption

    OpenAIRE

    Zolla, George A., Jr.

    1999-01-01

    This exploratory study identifies factors that influence the adoption and diffusion of intranet technology. A comparative case study of bipolar organizations is used to identify crucial implementation factors and create an innovation adoption model. A strategic approach for the adoption and diffusion of intranet technology is then presented.

  10. Study and application of construction technology of shielding concrete

    International Nuclear Information System (INIS)

    Wu Chongming; Ding Dexin; Chen Liangzhu; Zhao Jingfa; Li Shilong

    2008-01-01

    Process and techniques such as mixing,transportation and pouring have been studied. The construction technology for the shielding concrete with different densities has been summarized. The technology for the common concrete is quite different from that of shielding concrete, especially when its density is more than 4000 kg/m3. Application and practices have shown that different construction technologies shall be used for shielding concretes with different densities, and thus to ensure its uniformity and construction quality. (authors)

  11. Study on technology for minimizing radiation risk

    International Nuclear Information System (INIS)

    Lee, Jeong Ho; Kim, In Gyu; Kim, Jin Kyu; Lee, Kang Suk; Kim, Kug Chan; Chun, Ki Chung.

    1997-01-01

    Apoptosis, also called programmed cell death to discriminate it from necrosis, is characterized by : chromatin condensation, apoptotic body formation, fragmentation of DNA into oligonucleosome sized pieces, swelling and progressive cell degradation. We examined morphological and biochemical changes of T-lymphocytes following gamma irradiation exposure. The results are followings. 1) Murine lymphocytes have several characteristics : The irradiated cells undergo morphological and biochemical changes characteristic of apoptosis, causing growth delay. (0.01, 0.1, 1.0 Gy) 2) The onset of DNA fragmentation in cells occurs after one more cell divisions. 3) DNA fragmentation in cells occurs in all irradiated group (0.1, 1.0, 2.0, 4.0 Gy, 24 hours following gamma radiation exposure) 4) Apoptotic bodies were detected by confocal microscope with ease when compared with electron microscope. For the developing technology for minimizing radiation damage, the following experimental works have been done. 1) Establishment of experimental system for pre-screening of radioprotectants - Screening of protective substances using TSH bioindicator - Efficacy test of some radioprotective materials 2) TSH bioindicator system can make a scientific role in screening unknown materials for their possible radioprotective effect. (author). 42 refs., 3 tabs., 9 figs

  12. Study on technology for minimizing radiation risk

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jeong Ho; Kim, In Gyu; Kim, Jin Kyu; Lee, Kang Suk; Kim, Kug Chan; Chun, Ki Chung

    1997-01-01

    Apoptosis, also called programmed cell death to discriminate it from necrosis, is characterized by : chromatin condensation, apoptotic body formation, fragmentation of DNA into oligonucleosome sized pieces, swelling and progressive cell degradation. We examined morphological and biochemical changes of T-lymphocytes following gamma irradiation exposure. The results are followings. (1) Murine lymphocytes have several characteristics : The irradiated cells undergo morphological and biochemical changes characteristic of apoptosis, causing growth delay. (0.01, 0.1, 1.0 Gy) (2) The onset of DNA fragmentation in cells occurs after one more cell divisions. (3) DNA fragmentation in cells occurs in all irradiated group (0.1, 1.0, 2.0, 4.0 Gy, 24 hours following gamma radiation exposure) (4) Apoptotic bodies were detected by confocal microscope with ease when compared with electron microscope. For the developing technology for minimizing radiation damage, the following experimental works have been done. (1) Establishment of experimental system for pre-screening of radioprotectants - Screening of protective substances using TSH bioindicator - Efficacy test of some radioprotective materials (2) TSH bioindicator system can make a scientific role in screening unknown materials for their possible radioprotective effect. (author). 42 refs., 3 tabs., 9 figs.

  13. Fluoride ions vs removal technologies: A study

    Directory of Open Access Journals (Sweden)

    Jagvir Singh

    2016-11-01

    Full Text Available Literature reported that drinking water is a precious and scarce resource and it has to be protected and kept free from any kind of contamination. Further, it has to be used carefully without wasting. Literature also reported that fluoride bearing rocks are abundant in India, as a result, fluoride leaches out and contaminates the adjacent water and soil resources. A high concentration of fluoride ions in ground water increases up to more than 30 mg/L. This high concentration of fluoride ions causes many harmful and dangerous effects on our datum. Fluoride ions in larger quantities i.e. 20–80 mg/day taken over a period of 10–20 years result in crippling and skeletal fluorosis, severely damaging the bone. In the present scenario, there is a continuously increasing worldwide concern for the development of fluoride treatment technologies. Possibilities of reducing the high fluorine content in groundwater are by defluorination process/dilution with the surface water which is a very simple technique but the addition of Ca2+ ions to a solution in contact with fluorite when experimented in distilled water caused an appreciable decrease in fluoride concentration. In this review article, we emphasized the relationship between high concentrations of fluoride ions and their compounds and their health impact.

  14. Sorting through the chaff, nDNA gene trees for phylogenetic inference and hybrid identification of annual sunflowers (Helianthus sect. Helianthus).

    Science.gov (United States)

    Moody, Michael L; Rieseberg, Loren H

    2012-07-01

    The annual sunflowers (Helianthus sect. Helianthus) present a formidable challenge for phylogenetic inference because of ancient hybrid speciation, recent introgression, and suspected issues with deep coalescence. Here we analyze sequence data from 11 nuclear DNA (nDNA) genes for multiple genotypes of species within the section to (1) reconstruct the phylogeny of this group, (2) explore the utility of nDNA gene trees for detecting hybrid speciation and introgression; and (3) test an empirical method of hybrid identification based on the phylogenetic congruence of nDNA gene trees from tightly linked genes. We uncovered considerable topological heterogeneity among gene trees with or without three previously identified hybrid species included in the analyses, as well as a general lack of reciprocal monophyly of species. Nonetheless, partitioned Bayesian analyses provided strong support for the reciprocal monophyly of all species except H. annuus (0.89 PP), the most widespread and abundant annual sunflower. Previous hypotheses of relationships among taxa were generally strongly supported (1.0 PP), except among taxa typically associated with H. annuus, apparently due to the paraphyly of the latter in all gene trees. While the individual nDNA gene trees provided a useful means for detecting recent hybridization, identification of ancient hybridization was problematic for all ancient hybrid species, even when linkage was considered. We discuss biological factors that affect the efficacy of phylogenetic methods for hybrid identification.

  15. University-to-industry advanced technology transfer. A case study

    Energy Technology Data Exchange (ETDEWEB)

    Goldhor, R S; Lung, R T

    1983-06-01

    This case study examines the events in the transfer of an advanced technology (a text-to-speech reading machine) from the university group that developed the technology to an industrial firm seeking to exploit the innovation. After a brief history of the six-year project, the paper discusses the roles of the participants, markets, and time and cost considerations. A model of technology transfer is presented and policy implications derived from the case are discussed. Emphasis is placed on the need for matching technical competence between donor and recipient, and on the function of a transfer agent in facilitating the social process of technology transfer. 42 references, 6 figures, 4 tables.

  16. Young adults, technology, and weight loss: a focus group study.

    Science.gov (United States)

    Stephens, Janna; Moscou-Jackson, Gyasi; Allen, Jerilyn K

    2015-01-01

    Overweight and obesity are a major concern in young adults. Technology has been integrated into many weight loss interventions; however little is known about the use of this technology in young adults. The purpose of this study was to explore through focus group sessions the opinions of young adults on the use of technology for weight loss. A total of 17 young adults, between 18 and 25 years of age, participated in three focus group sessions. Major results indicated that young adults have very little knowledge on the use of Smartphone technology for weight loss but would like to use this type of technology to help them lose weight. Results also indicated that young adults struggle to make healthy food choices and have priorities that outweigh exercise and they need support and guidance to make better decisions. In conclusion, young adults would be open to using Smartphone technology for weight loss but also need feedback and guidance to help make healthy decisions.

  17. DOE technology information management system database study report

    Energy Technology Data Exchange (ETDEWEB)

    Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

    1994-11-01

    To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

  18. Propulsion Study for Small Transport Aircraft Technology (STAT)

    Science.gov (United States)

    Gill, J. C.; Earle, R. V.; Staton, D. V.; Stolp, P. C.; Huelster, D. S.; Zolezzi, B. A.

    1980-01-01

    Propulsion requirements were determined for 0.5 and 0.7 Mach aircraft. Sensitivity studies were conducted on both these aircraft to determine parametrically the influence of propulsion characteristics on aircraft size and direct operating cost (DOC). Candidate technology elements and design features were identified and parametric studies conducted to select the STAT advanced engine cycle. Trade off studies were conducted to determine those advanced technologies and design features that would offer a reduction in DOC for operation of the STAT engines. These features were incorporated in the two STAT engines. A benefit assessment was conducted comparing the STAT engines to current technology engines of the same power and to 1985 derivatives of the current technology engines. Research and development programs were recommended as part of an overall technology development plan to ensure that full commercial development of the STAT engines could be initiated in 1988.

  19. Selling Technology in Technical Advertisements: A Case Study.

    Science.gov (United States)

    Guthrie, James R.

    1995-01-01

    Argues that, as the category of "technical products" has expanded and the public's enthusiasm for such products has lessened, marketing writers have begun to reconsider their approaches to technology in ads. Studies two technical ads in detail, and compares the ways in which they portray technology. (SR)

  20. Education Technology Services at Indiana University: A Case Study.

    Science.gov (United States)

    Bichelmeyer, B. A.; Hara, Noriko; Yi, Jessi; Dennen, Vanessa; Avers, Dale; Tzeng, Jeng-Yi

    1998-01-01

    This paper, based on a qualitative research study, describes the technology resources available in the Indiana University School of Education, explains the range of services provided by Education Technology Services (ETS), documents the organizational structure of ETS, and describes the key processes and culture of ETS. (Author/AEF)

  1. Adoption Study Of Seed Priming Technology In Upland Rice ...

    African Journals Online (AJOL)

    Adoption study was carried out during 2003 cropping season on randomly selected 83 farmers out of the 300 that participated in the upland rice seed priming technology transfer between year 2000 – 2002 to determine the impact of the technology on upland rice production in five States of Nigeria, through the use of ...

  2. Planetary Science Technology Infusion Study: Findings and Recommendations Status

    Science.gov (United States)

    Anderson, David J.; Sandifer, Carl E., II; Sarver-Verhey, Timothy R.; Vento, Daniel M.; Zakrajsek, June F.

    2014-01-01

    The Planetary Science Division (PSD) within the National Aeronautics and Space Administrations (NASA) Science Mission Directorate (SMD) at NASA Headquarters sought to understand how to better realize a scientific return on spacecraft system technology investments currently being funded. In order to achieve this objective, a team at NASA Glenn Research Center was tasked with surveying the science and mission communities to collect their insight on technology infusion and additionally sought inputs from industry, universities, and other organizations involved with proposing for future PSD missions. This survey was undertaken by issuing a Request for Information (RFI) activity that requested input from the proposing community on present technology infusion efforts. The Technology Infusion Study was initiated in March 2013 with the release of the RFI request. The evaluation team compiled and assessed this input in order to provide PSD with recommendations on how to effectively infuse new spacecraft systems technologies that it develops into future competed missions enabling increased scientific discoveries, lower mission cost, or both. This team is comprised of personnel from the Radioisotope Power Systems (RPS) Program and the In-Space Propulsion Technology (ISPT) Program staff.The RFI survey covered two aspects of technology infusion: 1) General Insight, including: their assessment of barriers to technology infusion as related to infusion approach; technology readiness; information and documentation products; communication; integration considerations; interaction with technology development areas; cost-capped mission areas; risk considerations; system level impacts and implementation; and mission pull. 2) Specific technologies from the most recent PSD Announcements of Opportunities (AOs): The Advanced Stirling Radioisotope Generator (ASRG), aerocapture and aeroshell hardware technologies, the NASA Evolutionary Xenon Thruster (NEXT) ion propulsion system, and the

  3. A study on the nuclear technology policy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Maeng Ho; Ham, C. H.; Kim, H. J.; Chung, W. S.; Lee, T. J.; Lee, B. O.; Yun, S. W.; Choi, Y. M.; Eom, T. Y

    1998-01-01

    This study analyzed the major issues as the research activities for the support of establishment and implementation of national policy. The analyses were focused on the recommendations of the responsive direction of national policy in positive and effective manners in accordance with the changes of international nuclear affairs. This study also analyzed the creation of environmental foundation for effective implementation of the national policy and national R and D investment such as securing national consensus and openings of policy information to the public. The major results of the role and position of nuclear policy, trends of nuclear policy and nuclear R and D activities of USA, France, Japan, Asian developing countries etc. and international trends of small- and medium-sized reactor as well as spin-offs of nuclear R and D activities, were analyzed. (author). 66 refs., 27 tabs., 15 figs

  4. Study on commercial FBR concepts by combining innovative technologies

    International Nuclear Information System (INIS)

    Miura, M.; Inagaki, T.; Kuroha, M.; Hida, T.

    1992-01-01

    A study was conducted on future prospects of FBR commercialization. Targets of further improving safety and economy were set to make commercial power plants that would be superior to future LWRs. Promising innovative technologies studied domestically and overseas were extracted by evaluating prospects for commercialization, effect, and plant applicability. Several commercial plants were conceptualized by introducing such technology to large-scale and oxide-fuel reactors. Estimates of construction cost, etc., proved that the targets could be achieved. A concept of long-term technological development was synthesized. (author)

  5. Energy and cost saving results for advanced technology systems from the Cogeneration Technology Alternatives Study (CTAS)

    Science.gov (United States)

    Sagerman, G. D.; Barna, G. J.; Burns, R. K.

    1979-01-01

    An overview of the organization and methodology of the Cogeneration Technology Alternatives Study is presented. The objectives of the study were to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the future and to assess the advantages of advanced technology systems compared to those systems commercially available today. Advanced systems studied include steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics. Steam turbines, open cycle gas turbines, combined cycles, and diesel engines were also analyzed in versions typical of today's commercially available technology to provide a base against which to measure the advanced systems. Cogeneration applications in the major energy consuming manufacturing industries were considered. Results of the study in terms of plant level energy savings, annual energy cost savings and economic attractiveness are presented for the various energy conversion systems considered.

  6. Experimental study on ceramic membrane technology for onboard oxygen generation

    Directory of Open Access Journals (Sweden)

    Jiang Dongsheng

    2016-08-01

    Full Text Available The ceramic membrane oxygen generation technology has advantages of high concentration of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT and pressure driven ceramic membrane separation oxygen generation technology (PDCMSOGT. Experiments were conducted under different temperatures, pressures of feed air and produced oxygen flow rates. On the basis of these experiments, the flow rate of feed air, electric power provided, oxygen recovery rate and concentration of produced oxygen are compared under each working condition. It is concluded that the EDCMSOGT is the oxygen generation means more suitable for onboard conditions.

  7. Cost studies of thermally enhanced in situ soil remediation technologies

    International Nuclear Information System (INIS)

    Bremser, J.; Booth, S.R.

    1996-05-01

    This report describes five thermally enhanced technologies that may be used to remediate contaminated soil and water resources. The standard methods of treating these contaminated areas are Soil Vapor Extraction (SVE), Excavate ampersand Treat (E ampersand T), and Pump ampersand Treat (P ampersand T). Depending on the conditions at a given site, one or more of these conventional alternatives may be employed; however, several new thermally enhanced technologies for soil decontamination are emerging. These technologies are still in demonstration programs which generally are showing great success at achieving the expected remediation results. The cost savings reported in this work assume that the technologies will ultimately perform as anticipated by their developers in a normal environmental restoration work environment. The five technologies analyzed in this report are Low Frequency Heating (LF or Ohmic, both 3 and 6 phase AC), Dynamic Underground Stripping (DUS), Radio Frequency Heating (RF), Radio Frequency Heating using Dipole Antennae (RFD), and Thermally Enhanced Vapor Extraction System (TEVES). In all of these technologies the introduction of heat to the formation raises vapor pressures accelerating contaminant evaporation rates and increases soil permeability raising diffusion rates of contaminants. The physical process enhancements resulting from temperature elevations permit a greater percentage of volatile organic compound (VOC) or semi- volatile organic compound (SVOC) contaminants to be driven out of the soils for treatment or capture in a much shorter time period. This report presents the results of cost-comparative studies between these new thermally enhanced technologies and the conventional technologies, as applied to five specific scenarios

  8. Longitudinal Study: Efficacy of Online Technology Tools for Instructional Use

    Science.gov (United States)

    Uenking, Michael D.

    2011-01-01

    Studies show that the student population (secondary and post secondary) is becoming increasingly more technologically savvy. Use of the internet, computers, MP3 players, and other technologies along with online gaming has increased tremendously amongst this population such that it is creating an apparent paradigm shift in the learning modalities of these students. Instructors and facilitators of learning can no longer rely solely on traditional lecture-based lesson formals. In order to achieve student academic success and satisfaction and to increase student retention, instructors must embrace various technology tools that are available and employ them in their lessons. A longitudinal study (January 2009-June 2010) has been performed that encompasses the use of several technology tools in an instructional setting. The study provides further evidence that students not only like the tools that are being used, but prefer that these tools be used to help supplement and enhance instruction.

  9. Technology teachers as researchers : philosophical and empirical technology education studies in the Swedish TUFF Research School

    NARCIS (Netherlands)

    Skogh, I.B.; Vries, de M.J.

    2013-01-01

    This book presents the scientific output of the TUFF research school in Sweden. In this school, a group of active teachers worked together on a series of educational research studies. All of those studies were related to the teaching about technology and engineering. The research program consisted

  10. Young Adults, Technology, and Weight Loss: A Focus Group Study

    OpenAIRE

    Stephens, Janna; Moscou-Jackson, Gyasi; Allen, Jerilyn K.

    2015-01-01

    Overweight and obesity are a major concern in young adults. Technology has been integrated into many weight loss interventions; however little is known about the use of this technology in young adults. The purpose of this study was to explore through focus group sessions the opinions of young adults on the use of technology for weight loss. A total of 17 young adults, between 18 and 25 years of age, participated in three focus group sessions. Major results indicated that young adults have ver...

  11. Assimilation of enterprise technology upgrades: a factor-based study

    Science.gov (United States)

    Claybaugh, Craig C.; Ramamurthy, Keshavamurthy; Haseman, William D.

    2017-02-01

    The purpose of this study is to gain a better understanding of the differences in the propensity of firms to initiate and commit to the assimilation of an enterprise technology upgrade. A research model is proposed that examines the influences that four technological and four organisational factors have on predicting assimilation of a technology upgrade. Results show that firms with a greater propensity to assimilate the new enterprise resource planning (ERP) version have a higher assessment of relative advantage, IS technical competence, and the strategic role of IS relative to those firms with a lower propensity to assimilate a new ERP version.

  12. Study habits and technology use in Italian university students.

    Science.gov (United States)

    Poscia, Andrea; Frisicale, Emanuela Maria; Parente, Paolo; de Waure, Chiara; La Milia, Daniele Ignazio; Di Pietro, Maria Luisa

    2015-01-01

    Students' ability of learning is influenced by study habits. Among these, the use of technologies has assumed a controversial role. The aim of this paper is to analyse studying approach, the use of technologies and how they affect study habits in a population of university students addressed by the "Sportello Salute Giovani" ("Youth Health Information Desk") questionnaire. 16 questions referred to the approach to studying and the use of technologies (number 77-93) were analyzed. Absolute and relative frequencies were calculated. Stratification for sex, age and socio-economic status were performed and Chi square test was used to test the difference between sex, age class and socio-economic groups. 99.7% of students declared to have at least one mobile phone and 68.7% to use smartphones, i-phones and i-pads. Males (20.9% vs 14.9% female, p students (31.7% among 25-30 years old students vs 21.3% among 18-21 years old, p students with the highest socio-economic level (87.8% vs 54.2% of the lowest) seem more likely to use digital technologies/Internet for educational purposes. Our survey revealed that most college students still prefer approach the study using books instead of digital tools, but this attitude is conflicting with how many hours they use computers and surf Internet per weeks. Therefore, further studies are needed to understand better technology influence on study habits and its implication on health.

  13. Second Information Technology in Education Study: SITES 2006 Technical Report

    Science.gov (United States)

    Carstens, Ralph, Ed.; Pelgrum, Willem J., Ed.

    2009-01-01

    The International Association for the Evaluation of Educational Achievement (IEA) has been conducting comparative studies for 50 years. SITES 2006 is the fifth wave of surveys related to information and communication technology (ICT), a wave that IEA started with its Computers in Education Study (two studies with data collection in 1989 and 1992),…

  14. The study of technological prevention method of road accident ...

    African Journals Online (AJOL)

    The study of technological prevention method of road accident related to driver and vehicle. ... road accident prevention method based on the factors studied. The study of this paper can provide forceful data analysis support for the road traffic safety related research. Keywords: road accident; accident prevention; road safety.

  15. Technology Integration in the Schools of Guyana: A Case Study

    Science.gov (United States)

    MacKinnon, Gregory; MacKinnon, Paula

    2010-01-01

    The following study examines the implementation of learning technologies in Guyana, South America. Specifically, the study addresses the impact of using interactive radio instruction for teaching mathematics and SuccessMaker software for enhancing literacy skills. The research results were based on surveys, interviews, classroom observations, and…

  16. Integrating Educational Technologies into Teacher Education: A Case Study

    Science.gov (United States)

    Rawlins, Peter; Kehrwald, Benjamin

    2014-01-01

    This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

  17. Using interactive video technology in nursing education: a pilot study.

    Science.gov (United States)

    Zerr, Daria M; Pulcher, Karen L

    2008-02-01

    A pilot study was conducted to analyze the benefits of using interactive technology with external assessors and graduating senior nursing students during Senior Nurse Leadership Assessment Day at the University of Central Missouri. The primary aim was to determine whether videoconferencing technology would promote recruitment and retention of professional nurse external assessors without compromising student learning. Among the issues discussed are the advantages and disadvantages of using interactive videoconferencing technology in education and the influence of external assessors in nursing education. The study results indicate that interactive videoconferencing is an effective, accepted format for educational opportunities such as Senior Nurse Leadership Assessment Day, based on the lived experiences of the study participants. In addition, the results demonstrate that interactive videoconferencing does not compromise student learning or assessment by external assessors.

  18. Sharp at any Age: Moho boundary thickness estimates along a trans-sect through 2 Ga of tectonic history.

    Science.gov (United States)

    Servali, A.; Levin, V. L.; VanTongeren, J. A.

    2015-12-01

    In this study we evaluate crustal thickness and Moho sharpness beneath seismic stations in three different tectonic units of the North American continent: the Archean Superior Province, the Proterozoic Grenville Province, and the Paleozoic Appalachian Orogen. Our analysis involves two steps. First, for each site, we produce P-to-S receiver functions (RFs) organized by backazimuth and epicentral distance, and use them to identify the phase most likely representing a conversion from the Moho. Second, we construct averaged RFs for groups of telesismic events located in a similar geographic region, which we employ to examine shapes of Moho P-to-S converted phases in time series with maximum frequencies increasing from 0.25Hz to 2-3 Hz. At some sites we observe a progressive narrowing of a simple Moho converted phase with an increase in frequency, typical of a vertically instantaneous boundary, while at others the converted phase becomes progressively more complex, typical of a diffuse Moho. Thus, we adopt this difference in converted wave shape dependence on increasing frequency as a measure of Moho thickness. Our estimates of Moho thickness range from less than 300 m to over 2 km, with some locations showing evidence for multiple converting boundaries in the 35-50 km depth range. In this study we define "sharp" Moho at those sites where its vertical thickness is less than 1 km. Our results show that sharp Moho is universal in the Archean terranes regardless of surface lithology, likely due to higher Moho temperatures facilitating wide-spread delamination of dense lower crustal rocks. While a sharp Moho is not unique to the Superior Province, all Grenville and Appalachians sites where we find sharp Moho are in regions of granitic plutonism, suggesting a possible general association with reworking and density sorting of the crustal material (e.g. volcanic arc).

  19. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  20. Hurdling barriers through market uncertainty: Case studies ininnovative technology adoption

    Energy Technology Data Exchange (ETDEWEB)

    Payne, Christopher T.; Radspieler Jr., Anthony; Payne, Jack

    2002-08-18

    The crisis atmosphere surrounding electricity availability in California during the summer of 2001 produced two distinct phenomena in commercial energy consumption decision-making: desires to guarantee energy availability while blackouts were still widely anticipated, and desires to avoid or mitigate significant price increases when higher commercial electricity tariffs took effect. The climate of increased consideration of these factors seems to have led, in some cases, to greater willingness on the part of business decision-makers to consider highly innovative technologies. This paper examines three case studies of innovative technology adoption: retrofit of time-and-temperature signs on an office building; installation of fuel cells to supply power, heating, and cooling to the same building; and installation of a gas-fired heat pump at a microbrewery. We examine the decision process that led to adoption of these technologies. In each case, specific constraints had made more conventional energy-efficient technologies inapplicable. We examine how these barriers to technology adoption developed over time, how the California energy decision-making climate combined with the characteristics of these innovative technologies to overcome the barriers, and what the implications of hurdling these barriers are for future energy decisions within the firms.

  1. Technology transfer for Ukrainian milk treatment: A case study

    International Nuclear Information System (INIS)

    Dunn, M.J.; Walker, J.S.

    1994-01-01

    As a result of the Chernobyl Nuclear Power Plant accident, radioactive fission products have contaminated the food chain in the Ukraine. The highest doses to humans are a result of cesium contamination in milk. The milk produced in the Ukraine contains radioactive cesium at levels up to 10 times the acceptance standards. Bradtec has developed and demonstrated technology for the US Department of Energy for the treatment of groundwater and effluent water. This technology has also been tested and demonstrated for the Ukrainian government for the purpose of treating contaminated milk. Bradtec, a small business offering specialized technologies in the field of environmental remediation and waste management, has successfully worked with a consortium of businesses, National Laboratories and DOE Headquarters staff to develop and implement a technology demonstration strategy which has led to the implementation of a series collaboration agreements with Ukrainian officials. This paper describes, in a case study approach, the path followed by Bradtec and its collaboration partners in successfully implementing a technology transfer strategy. Also presented is an update on new programs that can provide benefit to private sector companies as DOE seeks to assist the private sector in joint venture/technology transfer relationships with the NIS (New Independent States). This paper should be of interest to all businesses seeking to participate in business opportunities in the NIS

  2. Genome re-assignment of Arachis trinitensis (Sect. Arachis, Leguminosae and its implications for the genetic origin of cultivated peanut

    Directory of Open Access Journals (Sweden)

    Germán Robledo

    2010-01-01

    Full Text Available The karyotype structure of Arachis trinitensis was studied by conventional Feulgen staining, CMA/DAPI banding and rDNA loci detection by fluorescence in situ hybridization (FISH in order to establish its genome status and test the hypothesis that this species is a genome donor of cultivated peanut. Conventional staining revealed that the karyotype lacked the small "A chromosomes" characteristic of the A genome. In agreement with this, chromosomal banding showed that none of the chromosomes had the large centromeric bands expected for A chromosomes. FISH revealed one pair each of 5S and 45S rDNA loci, located in different medium-sized metacentric chromosomes. Collectively, these results suggest that A. trinitensis should be removed from the A genome and be considered as a B or non-A genome species. The pattern of heterochromatic bands and rDNA loci of A. trinitensis differ markedly from any of the complements of A. hypogaea, suggesting that the former species is unlikely to be one of the wild diploid progenitors of the latter.

  3. Genome re-assignment of Arachis trinitensis (Sect. Arachis, Leguminosae) and its implications for the genetic origin of cultivated peanut

    Science.gov (United States)

    2010-01-01

    The karyotype structure of Arachis trinitensis was studied by conventional Feulgen staining, CMA/DAPI banding and rDNA loci detection by fluorescence in situ hybridization (FISH) in order to establish its genome status and test the hypothesis that this species is a genome donor of cultivated peanut. Conventional staining revealed that the karyotype lacked the small “A chromosomes” characteristic of the A genome. In agreement with this, chromosomal banding showed that none of the chromosomes had the large centromeric bands expected for A chromosomes. FISH revealed one pair each of 5S and 45S rDNA loci, located in different medium-sized metacentric chromosomes. Collectively, these results suggest that A. trinitensis should be removed from the A genome and be considered as a B or non-A genome species. The pattern of heterochromatic bands and rDNA loci of A. trinitensis differ markedly from any of the complements of A. hypogaea, suggesting that the former species is unlikely to be one of the wild diploid progenitors of the latter. PMID:21637581

  4. Cupreoboletus (Boletaceae, Boletineae), a new monotypic genus segregated from Boletus sect. Luridi to reassign the Mediterranean species B. poikilochromus.

    Science.gov (United States)

    Gelardi, Matteo; Simonini, Giampaolo; Ercole, Enrico; Davoli, Paolo; Vizzini, Alfredo

    2015-01-01

    Cupreoboletus is erected as a new monospecific genus of Boletaceae to accommodate the thermophilic southern European species Boletus poikilochromus, characterized by discoloration toward copper-red tints overall, hymenophore forming tiny crystals on drying, a pervasive and long lasting sweet odor and presence of pseudocystidia. Macro- and microscopic descriptions of the species based on re-examination of the type material and recent Italian collections including additional topotypical samples are provided and accompanied by photos and line drawings of the main anatomical structures. In addition, an epitype specimen is selected. Phylogenetic relationships were inferred from multigene molecular analysis based on partial sequences of the nuc rDNA 28S D1/D2 (28S) and internal transcribed spacer (ITS) regions and genes for ribosomal RNA polymerase II subunits 1 (rpb1) and 2 (rpb2) and translation-elongation factor 1-α (tef1α). Ecological context, geographical range and delimitation from closely allied taxa also were elucidated. B. martaluciae is treated as a synonym of C. poikilochromus according to the morphological and molecular comparative study. © 2015 by The Mycological Society of America.

  5. Foresight Study on Advanced Conversion Technologies of Fossil Fuels

    International Nuclear Information System (INIS)

    Claver, A.; Cabrera, J. A.

    2000-01-01

    The Observatorio de Prospectiva Tecnologica Industrial (OPTI) is a Foundation supported by the Ministry of Industry and Energy, (MINER) and has as main objective to provide a basic information and knowledge on technology evolution. This information will be accessible to the Administration and to the Companies and can be taking into account in planning and decision making of technology policies. Ciemat is member of OPTI and is the organism in charge of the actions in the Energy sector. CIEMAT has the responsibility on the realisation of the sector studies to get in three years (1998 to 2001) a foresight vision of the critical technology topics. The OPTI integrated strategic plan undertake the analysis of other seven technology sectors, with the same criteria on methodological aspects. Delphi method was used for the realization of the studies. It consisted of a survey conducted in two rounds using a questionnaire to check the experts opinion. The time frame of the studies was defined from 1999 to 2015. The study presented in this document has been performed by CIEMAT in the second stage of the OPTI activities. The main goal behind this study is to identify the advanced clean and efficient technologies for the conversion of fossil fuels to promote in our country. The questionnaire was addressed to 250 experts and the response rate was about the 37%, ratifying the final results. The spanish position and the barriers for the development of each technology has been determined and also the recommended measures to facilitate their performance in the future. This basic information is consider of main interest, taking in account the actual energetic situation with a foreseeable demand increase and fossil fuels dependence. (Author) 17 refs

  6. Technology Integration in Science Education: A Study of How Teachers Use Modern Learning Technologies in Biology Classrooms

    Science.gov (United States)

    Gnanakkan, Dionysius Joseph

    2017-01-01

    This multiple case-study investigated how high school biology teachers used modern learning technologies (probes, interactive simulations and animations, animated videos) in their classrooms and why they used the learning technologies. Another objective of the study was to assess whether the use of learning technologies alleviated misconceptions…

  7. Technology spin-offs generation – a multicase study

    Directory of Open Access Journals (Sweden)

    Jonas Mendes Constante

    2014-05-01

    Full Text Available The objective of this study is to understand how small businesses can innovate through the generation of technological spin-offs, identifying motivations, influences and barriers to achieving this phenomenon. Through a qualitative and exploratory study, we analyzed four cases of technological spin-offs in Santa Catarina State. We collected data through field observations, historical data and semi-structured interviews. The main reasons found for spin-offs creation were: diversification and to complement the value chain of the parent company and to ensure greater focus for a specific technology. The main barrier was lack of capital. Government initiatives to support the creation of new businesses, coupled with the organizational culture open to entrepreneurship and investment in R&D, contributed to the development of spin-offs analyzed. This work contributes to the understanding that small and medium-sized technology-based companies are a source of technological spin-offs and can benefit from the occurrence of this process.

  8. Study habits and technology use in Italian university students

    Directory of Open Access Journals (Sweden)

    Andrea Poscia

    2015-06-01

    Full Text Available BACKGROUND: Students' ability of learning is influenced by study habits. Among these, the use of technologies has assumed a controversial role. The aim of this paper is to analyse studying approach, the use of technologies and how they affect study habits in a population of university students addressed by the "Sportello Salute Giovani" ("Youth Health Information Desk" questionnaire. METHODS: 16 questions referred to the approach to studying and the use of technologies (number 77-93 were analyzed. Absolute and relative frequencies were calculated. Stratification for sex, age and socio-economic status were performed and Chi square test was used to test the difference between sex, age class and socio-economic groups. RESULTS: 99.7% of students declared to have at least one mobile phone and 68.7% to use smartphones, i-phones and i-pads. Males (20.9% vs 14.9% female, p < 0.05, older students (31.7% among 25-30 years old students vs 21.3% among 18-21 years old, p < 0.05 and students with the highest socio-economic level (87.8% vs 54.2% of the lowest seem more likely to use digital technologies/Internet for educational purposes. CONCLUSION: Our survey revealed that most college students still prefer approach the study using books instead of digital tools, but this attitude is conflicting with how many hours they use computers and surf Internet per weeks. Therefore, further studies are needed to understand better technology influence on study habits and its implication on health.

  9. Studying the Technology of Creating Cortical Electrode Instruments using the Rapid Prototyping Technology

    Directory of Open Access Journals (Sweden)

    Ablyaz T. R.

    2017-06-01

    Full Text Available This paper shows the results of studying the technology of manufacturing cortical electrode-instruments (EI with the use of indirect methods of the Rapid Prototyping technology. Functional EI prototypes were made by layered synthesis of the photopolymer material with the use of the stereolithography technology (SLA - Stereo Lithography Apparatus. The article is focused on two methods of indirect EI manufacturing. One of the EI prototypes was used for making a molded wax model for hot investment casting, followed by applying copper coating. The second prototype was used for applying copper plating to a prepared current-conductive layer. As a result of EDMing a steel workpiece, both EIs reached the desired depth, which is 1 mm. The copper plating applied to the EI preserves its integrity. Through the use of the casting technology, there is a possibility to cut the economic costs by 35%. Using a prototype with preliminarily applied conductive coating makes it possible to make geometrically-complex EIs.

  10. INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

    International Nuclear Information System (INIS)

    Banford, Anthony; Edwards, Jeremy; Demmer, Rick; Rankin, Richard; Hastings, Jeremy

    2013-01-01

    International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

  11. INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

    Energy Technology Data Exchange (ETDEWEB)

    Banford, Anthony; Edwards, Jeremy [National Nuclear Laboratory, 5th Floor Chadwick House, Birchwood Park, Warrington WA3 6AE(United Kingdom); Demmer, Rick; Rankin, Richard [Idaho National Laboratory, Idaho Falls, ID 83401(United States); Hastings, Jeremy [National Nuclear Laboratory, Central Laboratory Sellafield, Seascale, Cumbria CA20 1PG (United Kingdom)

    2013-07-01

    International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

  12. STUDY OF THE USE OF EDIBLE POWDERS TOMATO SAUCE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    O. Benderska

    2018-04-01

    Full Text Available Considered the technology for the production of edible powders from vegetable raw materials. The technology for producing powders from berries is developed to produce a high-quality product in which all ingredients of raw materials are stored in a concentrated form.The current trend in nutrition is related to the expansion of the range of functional products whose daily use contributes to the prevention of hypovitaminoses and metabolic disorders, and ultimately to the rehabilitation of the population. New, non-traditional sources of local raw materials, including plant based products, need to be explored and exploited in order to address the issue of instantiate new generation of healthy foods, and the development of technologies for obtaining functionalities. The use of fruit crops, the most source of biologically active substances, is very promising in this direction.The Department of Preservation Technology of the National University Food Technology has conducted a study to enable the use of fruit and berries for food powders. To this end, powder has been obtained from the blueberry berries of ordinary, with the establishment of its physico-chemical properties.The patterns of the influence of the blueberry powder on the functional properties of the foodstuffs were investigated in the example of tomato sauces.Analysis of the results of the studies has shown that a blueberry berry powder can be used in the production of canned and other products not only to enrich their functional ingredients but also to provide them with new technological properties. The food powders received do not contain harmful impurities, have high food value, are easily absorbed by the body, compact and long periods of time. Studies have shown that the blueberry powder is a rich source of vitamins (c acid, β-carotene, tocopherol and can be used successfully in the manufacture of tomato sauces with functional properties.

  13. Feasibility study on the development of advanced LWR fuel technology

    International Nuclear Information System (INIS)

    Jung, Youn Ho; Sohn, D. S.; Jeong, Y. H.; Song, K. W.; Song, K. N.; Chun, T. H.; Bang, J. G.; Bae, K. K.; Kim, D. H. and others.

    1997-07-01

    Worldwide R and D trends related to core technology of LWR fuels and status of patents have been surveyed for the feasibility study. In addition, various fuel cycle schemes have been studied to establish the target performance parameters. For the development of cladding material, establishment of long-term research plan for alloy development and optimization of melting process and manufacturing technology were conducted. A work which could characterize the effect of sintering additives on the microstructure of UO 2 pellet has been experimentally undertaken, and major sintering variables and their ranges have been found in the sintering process of UO 2 -Gd 2 O 3 burnable absorber pellet. The analysis of state of the art technology related to flow mixing device for spacer grid and debris filtering device for bottom nozzle and the investigation of the physical phenomena related to CHF enhancement and the establishment of the data base for thermal-hydraulic performance tests has been done in this study. In addition, survey on the documents of the up-to-date PWR fuel assemblies developed by foreign vendors have been carried out to understand their R and D trends and establish the direction of R and D for these structural components. And, to set the performance target of the new fuel, to be developed, fuel burnup and economy under the extended fuel cycle length scheme were estimated. A preliminary study on the failure mechanism of CANDU fuel, key technology and advanced coating has been performed. (author). 190 refs., 31 tabs., 129 figs

  14. Indicators of creativity in a technology class: a case study

    African Journals Online (AJOL)

    study we investigated how learners demonstrate creativity whilst en- gaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data collection. From this data, indicators of creativity emerged. Schools must encourage learners to be creative ...

  15. Role of surface studies in science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Karkhanavala, M D [Bhabha Atomic Research Centre, Bombay (India). Chemistry Div.

    1977-01-01

    Reactivity of solids is influenced by the surface properties such as structure, dislocations and composition. Corrosion and erosion are essentially surface phenomena. Surface studies, therefore, assume importance in prevention and minimization of corrosion and erosion. Discussion is illustrated with examples drawn from the field of nuclear power reactor technology.

  16. Indicators of creativity in a technology class: a case study ...

    African Journals Online (AJOL)

    Teachers seem to lack the skills and knowledge needed to recognise when creativity is taking place. In this study we investigated how learners demonstrate creativity whilst engaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data ...

  17. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  18. Educational Technology Adopters: A Case Study in University of Botswana

    Science.gov (United States)

    Dintoe, Seitebaleng Susan

    2018-01-01

    Although University of Botswana implemented national ICT policies and trained the lecturers to use educational technology, there was low-level use of eLearning in teaching and learning. In this regard, qualitative case study approach was used to explore and specifically focus on one aspect of the phenomenon; that is, the University of Botswana as…

  19. Case Study – Idling Reduction Technologies for Emergency Service Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

  20. Study on tamper-indicating technology in electronic seals system

    International Nuclear Information System (INIS)

    Xu Xiong; Han Feng; Zuo Guangxia; Zhao Xin; Zhang Quanhu; Di Yuming

    2009-01-01

    To strengthen our national arms control verification technical storage and deepen electronic seals' research, this paper mainly introduces seals' characteristics, functions and work principle, studies on tamper-indicating technology which is a key technology in electronic seals, designs some hardware circuit such as optical transceiver, temperature detection circuit, move detection circuit, re-prized circuit and so on, also designs a software program which is used for recording the destroying or tampering events' information. Experimental results show that electronic seals system can record the destroying or tampering events' information accurately and quickly, and give corresponding tamper-indication. (authors)

  1. Advanced Technology Subsonic Transport Study: N+3 Technologies and Design Concepts

    Science.gov (United States)

    Raymer, Daniel P.; Wilson, Jack; Perkins, H. Douglas; Rizzi, Arthur; Zhang, Mengmeng; RamirezPuentes, Alfredo

    2011-01-01

    Conceptual Research Corporation, the Science of the Possible, has completed a two-year study of concepts and technologies for future airliners in the 180-passenger class. This NASA-funded contract was primarily focused on the ambitious goal of a 70 percent reduction in fuel consumption versus the market-dominating Boeing 737-800. The study is related to the N+3 contracts awarded in 2008 by NASA s Aeronautics Research Mission Directorate to teams led by Boeing, GE Aviation, MIT, and Northrop Grumman, but with more modest goals and funding. CRC s contract featured a predominant emphasis on propulsion and fuel consumption, but since fuel consumption depends upon air vehicle design as much as on propulsion technology, the study included notional vehicle design, analysis, and parametric studies. Other NASA goals including NOx and noise reduction are of long-standing interest but were not highlighted in this study, other than their inclusion in the propulsion system provided to CRC by NASA. The B-737-800 was used as a benchmark, parametric tool, and design point of departure. It was modeled in the RDS-Professional aircraft design software then subjected to extensive parametric variations of parasitic drag, drag-due-to-lift, specific fuel consumption, and unsized empty weight. These studies indicated that the goal of a 70 percent reduction in fuel consumption could be attained with roughly a 30 percent improvement in all four parameters. The results were then fit to a Response Surface and coded for ease of use in subsequent trade studies. Potential technologies to obtain such savings were identified and discussed. More than 16 advanced concept designs were then prepared, attempting to investigate almost every possible emerging concept for application to this class airliner. A preliminary assessment of these concepts was done based on their total wetted area after design normalization of trimmed maximum lift. This assessment points towards a Tailless Airliner concept which

  2. Study on modeling technology in digital reactor system

    International Nuclear Information System (INIS)

    Liu Xiaoping; Luo Yuetong; Tong Lili

    2004-01-01

    Modeling is the kernel part of a digital reactor system. As an extensible platform for reactor conceptual design, it is very important to study modeling technology and develop some kind of tools to speed up preparation of all classical computing models. This paper introduces the background of the project and basic conception of digital reactor. MCAM is taken as an example for modeling and its related technologies used are given. It is an interface program for MCNP geometry model developed by FDS team (ASIPP and HUT), and designed to run on windows system. MCAM aims at utilizing CAD technology to facilitate creation of MCNP geometry model. There have been two ways for MCAM to utilize CAD technology: (1) Making use of user interface technology in aid of generation of MCNP geometry model; (2) Making use of existing 3D CAD model to accelerate creation of MCNP geometry model. This paper gives an overview of MCAM's major function. At last, several examples are given to demonstrate MCAM's various capabilities. (authors)

  3. The BERG faculty students readiness for information technologies study

    Directory of Open Access Journals (Sweden)

    Horovèák Pavel

    2002-12-01

    Full Text Available The contribution deals with the reconnaissance of our students’ readiness to study information technologies, its interpretation, comparison with some published data as well as with a completion and evaluation of the reconnaissance. It specifies methods and processes of evaluation, structure, sections and questions of the reconnaissance. The reconnaissance was oriented particularly to the evaluation of knowledge in the information technologies area acquired at secondary schools. It was completed in a classical paper form as a preparation for the realization and utilization of questionnaire in the electronic form. The following is constructed using modern internet and database technologies and presents extensive possibilities of evaluation answers respondents. The results of the reconnaissance are presented in the form distribution (sex, domicile, secondary school, secondary school influence, work with a computer, operating and exploitation of internet technologies, familiarity with operating systems and typical applications software and programming languages as well as the interest in information technologies of respondents. The results are compared with some other published data and future perspectives of completion and its evaluation of completion are outlined.

  4. Cost decreases in environmental technology. Evidence from four case studies

    Energy Technology Data Exchange (ETDEWEB)

    Oosterhuis, F. [Instituut for Environmental Studies, Vrije Universiteit VU, Amsterdam (Netherlands)

    2007-07-15

    The cost of a new technology tends to decrease as its uptake grows, and environmental technology is no exception to this general rule. Factors that can bring about such cost reductions include economies of scale, 'learning-by-doing', incremental technological improvements, and growing competition. In preparing environmental policies, the potential for future cost reductions is often disregarded. The present study aims to provide some additional empirical evidence on the cost decreases in environmental technology and the factors that lie behind them. To this end, four exemplary case studies have been selected. The first case (NOx emission abatement by Selective Catalytic Reduction (SCR)), shows a wide variety in cost estimates, without a clear trend. This is even true for the costs of a fairly homogeneous type of investment (SCR in coal fired power plants). Nevertheless, it is clear that an important cost decrease has been achieved by prolonging the lifetime of the catalyst, which is one of the main cost components in SCR. In the second case (NH3 emission abatement by chemical air scrubbers in pig farming) there is not yet sufficient experience with the technology to draw conclusions on the development of costs. However, it is already clear that economizing on the capacity of the system can contribute to important cost savings. Three-way catalytic converters in cars have shown significant price decreases following their large scale introduction on the European market in the early 1990s. Probably economies of scale have played an important role in this case, as the size of the market made mass production possible. To some extent, cost reductions may also be attributed to improvements such as the need for less materials (e.g. platinum). Furthermore, the performance of catalytic converters has improved, implying that the cost per unit of emission reduction has decreased even more than the cost of the device itself. Market prices of Compact Fluorescent Lamps

  5. Simulation studies for the evaluation of health information technologies

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... system on the appropriateness of prescriptions and drugrelated activities, including laboratory test ordering or medication changes. This article presents the results of a controlled simulation study with 50 simulation runs, including ten doctors and five simulation patients, and discusses experiences...

  6. The study of the HTGR technology and its industry applications

    International Nuclear Information System (INIS)

    Lu Yingzhong; Wang Dazhong; Zhong Daxin

    1987-01-01

    This paper summarizes the progress and main results of R and D on High Temperature Reactor technology in INET of Tsinghua University. Several HTR design studies have been carried out and briefly introduced in this paper. While the primary study of the modular HTR process steam application in heavy oil recovery is discussed. A lot of experiments and developmental work, e.g., some HTR component experiments, fuel and material developments have been done, and the major progresses are briefed. (author)

  7. Integrating Science and Technology: Using Technological Pedagogical Content Knowledge as a Framework to Study the Practices of Science Teachers

    Science.gov (United States)

    Pringle, Rose M.; Dawson, Kara; Ritzhaupt, Albert D.

    2015-01-01

    In this study, we examined how teachers involved in a yearlong technology integration initiative planned to enact technological, pedagogical, and content practices in science lessons. These science teachers, engaged in an initiative to integrate educational technology in inquiry-based science lessons, provided a total of 525 lesson plans for this…

  8. Value of monoenergetic dual-energy CT (DECT) for artefact reduction from metallic orthopedic implants in post-mortem studies.

    Science.gov (United States)

    Filograna, Laura; Magarelli, Nicola; Leone, Antonio; Guggenberger, Roman; Winklhofer, Sebastian; Thali, Michael John; Bonomo, Lorenzo

    2015-09-01

    The aim of this ex vivo study was to assess the performance of monoenergetic dual-energy CT (DECT) reconstructions to reduce metal artefacts in bodies with orthopedic devices in comparison with standard single-energy CT (SECT) examinations in forensic imaging. Forensic and clinical impacts of this study are also discussed. Thirty metallic implants in 20 consecutive cadavers with metallic implants underwent both SECT and DECT with a clinically suitable scanning protocol. Extrapolated monoenergetic DECT images at 64, 69, 88, 105, 120, and 130 keV and individually adjusted monoenergy for optimized image quality (OPTkeV) were generated. Image quality of the seven monoenergetic images and of the corresponding SECT image was assessed qualitatively and quantitatively by visual rating and measurements of attenuation changes induced by streak artefact. Qualitative and quantitative analyses showed statistically significant differences between monoenergetic DECT extrapolated images and SECT, with improvements in diagnostic assessment in monoenergetic DECT at higher monoenergies. The mean value of OPTkeV was 137.6 ± 4.9 with a range of 130 to 148 keV. This study demonstrates that monoenergetic DECT images extrapolated at high energy levels significantly reduce metallic artefacts from orthopedic implants and improve image quality compared to SECT examination in forensic imaging.

  9. Value of monoenergetic dual-energy CT (DECT) for artefact reduction from metallic orthopedic implants in post-mortem studies

    International Nuclear Information System (INIS)

    Filograna, Laura; Magarelli, Nicola; Leone, Antonio; Bonomo, Lorenzo; Guggenberger, Roman; Winklhofer, Sebastian; Thali, Michael John

    2015-01-01

    The aim of this ex vivo study was to assess the performance of monoenergetic dual-energy CT (DECT) reconstructions to reduce metal artefacts in bodies with orthopedic devices in comparison with standard single-energy CT (SECT) examinations in forensic imaging. Forensic and clinical impacts of this study are also discussed. Thirty metallic implants in 20 consecutive cadavers with metallic implants underwent both SECT and DECT with a clinically suitable scanning protocol. Extrapolated monoenergetic DECT images at 64, 69, 88, 105, 120, and 130 keV and individually adjusted monoenergy for optimized image quality (OPTkeV) were generated. Image quality of the seven monoenergetic images and of the corresponding SECT image was assessed qualitatively and quantitatively by visual rating and measurements of attenuation changes induced by streak artefact. Qualitative and quantitative analyses showed statistically significant differences between monoenergetic DECT extrapolated images and SECT, with improvements in diagnostic assessment in monoenergetic DECT at higher monoenergies. The mean value of OPTkeV was 137.6 ± 4.9 with a range of 130 to 148 keV. This study demonstrates that monoenergetic DECT images extrapolated at high energy levels significantly reduce metallic artefacts from orthopedic implants and improve image quality compared to SECT examination in forensic imaging. (orig.)

  10. Value of monoenergetic dual-energy CT (DECT) for artefact reduction from metallic orthopedic implants in post-mortem studies

    Energy Technology Data Exchange (ETDEWEB)

    Filograna, Laura [University of Zurich, Department of Forensic Medicine and Imaging, Institute of Forensic Medicine, Zurich (Switzerland); Catholic University of Rome, School of Medicine, University Hospital ' ' A. Gemelli' ' , Department of Radiological Sciences, Rome (Italy); Magarelli, Nicola; Leone, Antonio; Bonomo, Lorenzo [Catholic University of Rome, School of Medicine, University Hospital ' ' A. Gemelli' ' , Department of Radiological Sciences, Rome (Italy); Guggenberger, Roman; Winklhofer, Sebastian [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland); Thali, Michael John [University of Zurich, Department of Forensic Medicine and Imaging, Institute of Forensic Medicine, Zurich (Switzerland)

    2015-09-15

    The aim of this ex vivo study was to assess the performance of monoenergetic dual-energy CT (DECT) reconstructions to reduce metal artefacts in bodies with orthopedic devices in comparison with standard single-energy CT (SECT) examinations in forensic imaging. Forensic and clinical impacts of this study are also discussed. Thirty metallic implants in 20 consecutive cadavers with metallic implants underwent both SECT and DECT with a clinically suitable scanning protocol. Extrapolated monoenergetic DECT images at 64, 69, 88, 105, 120, and 130 keV and individually adjusted monoenergy for optimized image quality (OPTkeV) were generated. Image quality of the seven monoenergetic images and of the corresponding SECT image was assessed qualitatively and quantitatively by visual rating and measurements of attenuation changes induced by streak artefact. Qualitative and quantitative analyses showed statistically significant differences between monoenergetic DECT extrapolated images and SECT, with improvements in diagnostic assessment in monoenergetic DECT at higher monoenergies. The mean value of OPTkeV was 137.6 ± 4.9 with a range of 130 to 148 keV. This study demonstrates that monoenergetic DECT images extrapolated at high energy levels significantly reduce metallic artefacts from orthopedic implants and improve image quality compared to SECT examination in forensic imaging. (orig.)

  11. New information technologies in social studies: postnonclassical paradigm

    Directory of Open Access Journals (Sweden)

    Galina Ya. Menshikova

    2015-09-01

    Full Text Available The paper discusses topical issues of virtual reality technologies in social research, particularly when studying the processes of ethnic cultural identity, development of ethnic and racial attitudes using «virtual avatars» for managing ethnic conflicts, development of communication skills in representatives of different cultures using virtual collaboration and video conferencing. One of the key issues of the paper to discuss the necessity of post-non-classical paradigm as a conceptual framework for social research. Contemporary social studies require developing new methods, technologies and techniques at all levels of the research: from task setting to the development of new methods and result analysis. One of the most promising methods rapidly developed in recent years is virtual reality technology. The paper presents the analysis of more than 40 experimental studies performed using CAVE and HMD virtual reality systems. Their application is considered hereunder for the studies of verbal and nonverbal cues in communication, social skills training, treatment of social anxiety disorders and the development of new methods of cognitive behavioural therapy. Studies on interpersonal communication with virtual partners (i.e. «avatars» are considered. Factors affecting the communication quality of avatars, its visual and behavioural realism, problems of seeing virtual human as real partners for social interaction are discussed. Special attention is paid to the studies of racial and ethnic attitudes performed using virtual reality systems. The possibilities of practical applications of the VR technologies for shaping positive attitudes and development of communication skills in a sociocultural context are emphasized.

  12. A study of the impact of technology in early education

    OpenAIRE

    Wajszczyk, Rafal

    2014-01-01

    The purpose of this study is to analyse the current state of the use of Information and communication technology (ICT) and its impact on pupils in their early stages of education. The aim is to find out how, when and in what context ICT is used in the work with students. The overall objective is to study teachers views on ICT and their opinion on how ICT does affects pupils - positively or negatively. The results of this study are based on both a literature review and a qualitative study. The...

  13. Politicizing science: conceptions of politics in science and technology studies.

    Science.gov (United States)

    Brown, Mark B

    2015-02-01

    This essay examines five ideal-typical conceptions of politics in science and technology studies. Rather than evaluating these conceptions with reference to a single standard, the essay shows how different conceptions of politics serve distinct purposes: normative critique, two approaches to empirical description, and two views of democracy. I discuss each conception of politics with respect to how well it fulfills its apparent primary purpose, as well as its implications for the purpose of studying a key issue in contemporary democratic societies: the politicization of science. In this respect, the essay goes beyond classifying different conceptions of politics and also recommends the fifth conception as especially conducive to understanding and shaping the processes whereby science becomes a site or object of political activity. The essay also employs several analytical distinctions to help clarify the differences among conceptions of politics: between science as 'political' (adjective) and science as a site of 'politics' (noun), between spatial-conceptions and activity-conceptions of politics, between latent conflicts and actual conflicts, and between politics and power. The essay also makes the methodological argument that the politics of science and technology is best studied with concepts and methods that facilitate dialogue between actors and analysts. The main goal, however, is not to defend a particular view of politics, but to promote conversation on the conceptions of politics that animate research in social studies of science and technology.

  14. Technology Evaluation Report 17. Videoconferencing in Theatre and Performance Studies

    Directory of Open Access Journals (Sweden)

    Mark Childs

    2003-04-01

    Full Text Available Previous reports in this series have indicated the growing acceptance of video-conferencing in education delivery. The current report compares a series of video-conferencing methods in an activity requiring precision of expression and communication: theatre and performance studies. The Accessing and Networking with National and International Expertise (ANNIE project is a two-year project undertaken jointly by the University of Warwick and the University of Kent at Canterbury, running from March 2001 to March 2003. The project's aim is to enhance students' learning experience in theatre studies by enabling access to research-based teaching and to workshops led by practitioners of national and international standing. Various technologies have been used, particularly ISDN video-conferencing, computer-mediated conferencing, and the Internet. This report concludes that video-conferencing methods will gain acceptance in education, as academic schools themselves are able to operate commonly available technology the assistance of specialised service units.

  15. Study of Smart Campus Development Using Internet of Things Technology

    Science.gov (United States)

    Widya Sari, Marti; Wahyu Ciptadi, Prahenusa; Hafid Hardyanto, R.

    2017-04-01

    This paper describes the development of smart campus using Internet of Things (IoT) technology. Through smart campus, it is possible that a campus is connected via online by the outside entity, so that the teaching approach based on technology can be conducted in real time. This research was conducted in smart education, smart parking and smart room. Observation and literature studies were applied as the research method with the related theme for the sake of system design of smart campus. The result of this research is the design of smart campus system that includes smart education development, smart parking and smart room with the sake of Universitas PGRI Yogyakarta as the case study.

  16. Single-cell technologies to study the immune system.

    Science.gov (United States)

    Proserpio, Valentina; Mahata, Bidesh

    2016-02-01

    The immune system is composed of a variety of cells that act in a coordinated fashion to protect the organism against a multitude of different pathogens. The great variability of existing pathogens corresponds to a similar high heterogeneity of the immune cells. The study of individual immune cells, the fundamental unit of immunity, has recently transformed from a qualitative microscopic imaging to a nearly complete quantitative transcriptomic analysis. This shift has been driven by the rapid development of multiple single-cell technologies. These new advances are expected to boost the detection of less frequent cell types and transient or intermediate cell states. They will highlight the individuality of each single cell and greatly expand the resolution of current available classifications and differentiation trajectories. In this review we discuss the recent advancement and application of single-cell technologies, their limitations and future applications to study the immune system. © 2015 The Authors. Immunology Published by John Wiley & Sons Ltd.

  17. Studies of cell biomechanics with surface micro-/nano-technology

    International Nuclear Information System (INIS)

    Wang Dong; Zhang Wei; Jiang Xingyu

    2011-01-01

    We report the recent progress in our studies of cell biology using micro-/nano-technology. Cells have a size of several to tens of microns, which makes them easily manipulated by micro-/nano-technology. The shape of the cell influences the alignment of the actin cytoskeleton, which bears the main forces of the cell, maintains the shape,and mediates a series of biochemical reactions. We invented a stretching device and studied the real-time actin filament dynamics under stretch. We found that one stretch cycle shortened the actin filaments and promoted their reassemble process. Cell migration is a complex mechanical process. We found that cell geometry determines the cell polarity and migration direction. We fabricated three-dimensional surfaces to mimic the topography in vivo, and further built a cell culture model by integrating the three-dimensional surface, microfluidics, cell patterning,and coculturing of multiple cell types. We also investigated the neuronal guidance by surface patterning. (authors)

  18. Technology Use in Elementary Education in Turkey: A Case Study

    Science.gov (United States)

    Kurt, Serhat

    2010-01-01

    Background: As countries continue to invest in technology and place educational technology in schools, teachers are expected to make use of technology in their teaching. At this point in time, we can say that technology will stay in schools. Many countries have already included the integration of technology into education in their agenda for…

  19. A Study on the Revitalizing of technology commercialization in KAERI

    International Nuclear Information System (INIS)

    Choi, J. I.; Jang, S. K.; Hong, G. P.; Lee, E. S.

    2009-02-01

    The TEC training program should be implemented for researches who want to commercialize their own technologies. To build creative organization culture is essential for technology commercialization. Collaboration strategy is related to analyze how KAERI is catching up their technological capabilities in nuclear technology, and what the success factors of KAERI in technology commercialization are.

  20. Feasibility study on the development of advanced LWR fuel technology

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Youn Ho; Sohn, D. S.; Jeong, Y. H.; Song, K. W.; Song, K. N.; Chun, T. H.; Bang, J. G.; Bae, K. K.; Kim, D. H. and others

    1997-07-01

    Worldwide R and D trends related to core technology of LWR fuels and status of patents have been surveyed for the feasibility study. In addition, various fuel cycle schemes have been studied to establish the target performance parameters. For the development of cladding material, establishment of long-term research plan for alloy development and optimization of melting process and manufacturing technology were conducted. A work which could characterize the effect of sintering additives on the microstructure of UO{sub 2} pellet has been experimentally undertaken, and major sintering variables and their ranges have been found in the sintering process of UO{sub 2}-Gd{sub 2}O{sub 3} burnable absorber pellet. The analysis of state of the art technology related to flow mixing device for spacer grid and debris filtering device for bottom nozzle and the investigation of the physical phenomena related to CHF enhancement and the establishment of the data base for thermal-hydraulic performance tests has been done in this study. In addition, survey on the documents of the up-to-date PWR fuel assemblies developed by foreign vendors have been carried out to understand their R and D trends and establish the direction of R and D for these structural components. And, to set the performance target of the new fuel, to be developed, fuel burnup and economy under the extended fuel cycle length scheme were estimated. A preliminary study on the failure mechanism of CANDU fuel, key technology and advanced coating has been performed. (author). 190 refs., 31 tabs., 129 figs.

  1. Study of the Accelerator Technology Development for Cancer Radiotherapy

    International Nuclear Information System (INIS)

    Sudjatmoko; Triyono; E-Supriyatni

    2000-01-01

    The hadronic particle beams including both protons, neutrons and charged particles have been studied for cancer therapy by a number of research centers in several countries during the past two decades. In this paper is briefly discussed concerning the accelerator type and its applications. The future trends are seen in the new technological developments like the use of proton gantries, beam scanning techniques, improved patient handling system and in the increasing precision of treatment. (author)

  2. Cogeneration technology alternatives study. Volume 1: Summary report

    Science.gov (United States)

    1980-01-01

    Data and information in the area of advanced energy conversion systems for industrial congeneration applications in the 1985-2000 time period was studied. Six current and thirty-one advanced energy conversion systems were defined and combined with appropriate balance-of-plant equipment. Twenty-six industrial processes were selected from among the high energy consuming industries to serve as a framework for the study. Each conversion system was analyzed as a cogenerator with each industrial plant. Fuel consumption, costs, and environmental intrusion were evaluated and compared to corresponding traditional values. Various cogeneration strategies were analyzed and both topping and bottoming (using industrial by-product heat) applications were included. The advanced energy conversion technologies indicated reduced fuel consumption, costs, and emissions. Typically fuel energy savings of 10 to 25 percent were predicted compared to traditional on-site furnaces and utility electricity. With the variety of industrial requirements, each advanced technology had attractive applications. Overall, fuel cells indicated the greatest fuel energy savings and emission reductions. Gas turbines and combined cycles indicated high overall annual cost savings. Steam turbines and gas turbines produced high estimated returns. In some applications, diesels were most efficient. The advanced technologies used coal-derived fuels, or coal with advanced fluid bed combustion or on-site gasification systems.

  3. Technological aspects of hospital communication challenges: an observational study.

    Science.gov (United States)

    Popovici, Ilinca; Morita, Plinio P; Doran, Diane; Lapinsky, Stephen; Morra, Dante; Shier, Ashleigh; Wu, Robert; Cafazzo, Joseph A

    2015-06-01

    To gain insights into how technological communication tools impact effective communication among clinicians, which is critical for patient safety. This multi-site observational study analyzes inter-clinician communication and interaction with information technology, with a focus on the critical process of patient transfer from the Emergency Department to General Internal Medicine. Mount Sinai Hospital, Sunnybrook Health Sciences Centre and Toronto General Hospital. At least five ED and general internal medicine nurses and physicians directly involved in patient transfers were observed on separate occasions at each institution. N/A. N/A. The study provides insight into clinician workflow, evaluates current hospital communication systems and identifies key issues affecting communication: interruptions, issues with numeric pagers, lack of integrated communication tools, lack of awareness of consultation status, inefficiencies related to the paper chart, unintuitive user interfaces, mixed use of electronic and paper systems and lack of up-to-date contact information. It also identifies design trade-offs to be negotiated: synchronous communication vs. reducing interruptions, notification of patient status vs. reducing interruptions and speed vs. quality of handovers. The issues listed should be considered in the design of new technology for hospital communications. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

  4. Managing knowledge: a technology transfer case study in IEN

    International Nuclear Information System (INIS)

    Pereira, Ana Gabriella Amorim Abreu

    2009-01-01

    Knowledge management is paramount nowadays. In order to enable the members of an organization to deal with their current situations effectively it is mandatory to know and enhance its intellectual capital. Managing the organization knowledge is important to the extent that it allows and reinforce its mission (what we are trying to accomplish?), and performance (how do we deliver the results?). As a result of a knowledge management effort, the organization can create value for itself and for society as a whole. In this paper, we argue that a technology developed at a research institute and transferred to an industry is knowledge to be managed in order to create value, both for the society and for the Institute. In order to manage such knowledge, it is proposed an approach to enhance the value creation potential of a technology transfer. This paper propose an investigation to expand the understanding on how a public research institute and a private firm could introduce their value creation wishes into a technology transfer agreement in a way to reflect and provide the realization of those wishes. It is proposed that, from the identification of the organizations expectations it is possible to infer which agreement attributes will contribute to that value creation and to establish satisfactory agreement configurations. These configurations have the potential to generate those consequences, given that, through the transfer, each organization seeks to increase potential benefits and to reduce potential sacrifices. Supported by exchange flow and value creation models, by the knowledge management and the means-end theory, an approach to increase the value creation potential of a technology transfer is proposed. Evidences from a case study sustain the proposed approach. The case study unity is the Instituto de Engenharia Nuclear, a public research institute. (author)

  5. Studies on Development of Space Kimchi Using Radiation Fusion Technology with Food Technology

    International Nuclear Information System (INIS)

    Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Seok; Park, Jin Kyu; Park, Jae Nam

    2007-04-01

    Kimchi is Korean traditional fermented vegetable, it was known to one of health food through the world 5 sorts and to one of culture bequest of 100 kinds. In this study, it was conducted to development of Korean space food. Object of the study is development of food processed technology for long term storage and stability of supply at severe environment such as space, desert, deep sea. Irradiation technology is cold sterilization method, and it is able to fusion with the other food manufacturing and additives using method. Therefore, this study can offer to basic information for development of Korean space food. Side by side, it was expected that preceding results were able to wide utilization extension such as export of cured fermentation food. This study was conducted to evaluate the combined effects of additives (A), N2-packaging (N 2 ), mild heating at 60 .deg. C (HT) and gamma irradiation of 25 kGy (IR) at frozen state (F) on the shelf stability and quality of Kimchi during storage at 35 .deg. C for 30 days. Briefly, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of Kimchi. However, sensory quality was decreased. After all, irradiation was conducted at Kimchi samples for quality maintenance after gas exchange packaging method such as N 2 -packaging, quick freezing(-70 .deg. C). Therefore, the combination treatment was effected to insurance of shelf-life and satisfaction of quality. But other methods needed for inhibition deterioration of texture. Calcium lactate and vitamin C were added at Kimchi for prevention of softening, oleoresin paprika and artificial Kimchi flavor were added for improvement of sensory quality decreased by severe sterilization

  6. Studies on Development of Space Kimchi Using Radiation Fusion Technology with Food Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Seok; Park, Jin Kyu; Park, Jae Nam

    2007-04-15

    Kimchi is Korean traditional fermented vegetable, it was known to one of health food through the world 5 sorts and to one of culture bequest of 100 kinds. In this study, it was conducted to development of Korean space food. Object of the study is development of food processed technology for long term storage and stability of supply at severe environment such as space, desert, deep sea. Irradiation technology is cold sterilization method, and it is able to fusion with the other food manufacturing and additives using method. Therefore, this study can offer to basic information for development of Korean space food. Side by side, it was expected that preceding results were able to wide utilization extension such as export of cured fermentation food. This study was conducted to evaluate the combined effects of additives (A), N2-packaging (N{sub 2}), mild heating at 60 .deg. C (HT) and gamma irradiation of 25 kGy (IR) at frozen state (F) on the shelf stability and quality of Kimchi during storage at 35 .deg. C for 30 days. Briefly, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of Kimchi. However, sensory quality was decreased. After all, irradiation was conducted at Kimchi samples for quality maintenance after gas exchange packaging method such as N{sub 2}-packaging, quick freezing(-70 .deg. C). Therefore, the combination treatment was effected to insurance of shelf-life and satisfaction of quality. But other methods needed for inhibition deterioration of texture. Calcium lactate and vitamin C were added at Kimchi for prevention of softening, oleoresin paprika and artificial Kimchi flavor were added for improvement of sensory quality decreased by severe sterilization.

  7. "Disruptive Technologies", "Pedagogical Innovation": What's New? Findings from an In-Depth Study of Students' Use and Perception of Technology

    Science.gov (United States)

    Conole, Grainne; de Laat, Maarten; Dillon, Teresa; Darby, Jonathan

    2008-01-01

    The paper describes the findings from a study of students' use and experience of technologies. A series of in-depth case studies were carried out across four subject disciplines, with data collected via survey, audio logs and interviews. The findings suggest that students are immersed in a rich, technology-enhanced learning environment and that…

  8. Introducing technology into medical education: two pilot studies.

    Science.gov (United States)

    George, Paul; Dumenco, Luba; Dollase, Richard; Taylor, Julie Scott; Wald, Hedy S; Reis, Shmuel P

    2013-12-01

    Educators are integrating new technology into medical curriculum. The impact of newer technology on educational outcomes remains unclear. We aimed to determine if two pilot interventions, (1) introducing iPads into problem-based learning (PBL) sessions and (2) online tutoring would improve the educational experience of our learners. We voluntarily assigned 26 second-year medical students to iPad-based PBL sessions. Five students were assigned to Skype for exam remediation. We performed a mixed-method evaluation to determine efficacy. Pilot 1: Seventeen students completed a survey following their use of an iPad during the second-year PBL curriculum. Students noted the iPad allows for researching information in real time, annotating lecture notes, and viewing sharper images. Data indicate that iPads have value in medical education and are a positive addition to the curriculum. Pilot 2: Students agreed that online tutoring is at least or more effective than in-person tutoring. In our pilot studies, students experienced that iPads and Skype are beneficial in medical education and can be successfully employed in areas such as PBL and remediation. Educators should continue to further examine innovative opportunities for introducing technology into medical education. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  9. Gender in health technology assessment: pilot study on agency approaches.

    Science.gov (United States)

    Panteli, Dimitra; Zentner, Annette; Storz-Pfennig, Philipp; Busse, Reinhard

    2011-07-01

    Gender as a social construct is a recognized health determinant. Because best practice in reporting health technology assessment (HTA) clearly specifies the need to appraise a technology's social impact within the target population, the extent to which gender issues are taken into account in HTA production is of interest, not only in light of equitable practices but also for reasons of effectiveness. The aim of this study is to provide a first assessment of the degree of gender sensitivity shown by HTA agencies around the world today. The Web sites of sixty HTA agencies were analyzed. The consideration of gender aspects was specifically looked for in each agency's general mission statement, its priority setting process, and its methodological approach. Additionally, specific gender-oriented initiatives not belonging to any of the aforementioned categories were identified. Of the sixty agencies, less than half mention a commitment to addressing the social implication of health technologies. Only fifteen institutions make information on their priority setting principles available on their Web sites and gender was an issue in two of those cases. Data on methodology were obtainable online from 18 agencies, two of which mentioned gender issues explicitly. Finally, gender-oriented initiatives were identified by thirteen agencies. A gender-sensitive approach is apparently rarely adopted in current HTA production. Exceptional practices and relevant tools do exist and could serve as examples to be promoted by international collaborative networks.

  10. A Comparative Study on Emerging Electric Vehicle Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Ford, Jonathan [Sentech, Inc.; Khowailed, Gannate [Sentech, Inc.; Blackburn, Julia [Sentech, Inc.; Sikes, Karen [Sentech, Inc.

    2011-03-01

    Numerous organizations have published reports in recent years that investigate the ever changing world of electric vehicle (EV) technologies and their potential effects on society. Specifically, projections have been made on greenhouse gas (GHG) emissions associated with these vehicles and how they compare to conventional vehicles or hybrid electric vehicles (HEVs). Similar projections have been made on the volumes of oil that these vehicles can displace by consuming large amounts of grid electricity instead of petroleum-based fuels. Finally, the projected rate that these new vehicle fleets will enter the market varies significantly among organizations. New ideas, technologies, and possibilities are introduced often, and projected values are likely to be refined as industry announcements continue to be made. As a result, over time, a multitude of projections for GHG emissions, oil displacement, and market penetration associated with various EV technologies has resulted in a wide range of possible future outcomes. This leaves the reader with two key questions: (1) Why does such a collective range in projected values exist in these reports? (2) What assumptions have the greatest impact on the outcomes presented in these reports? Since it is impractical for an average reader to review and interpret all the various vehicle technology reports published to date, Sentech Inc. and the Oak Ridge National Laboratory have conducted a comparative study to make these interpretations. The primary objective of this comparative study is to present a snapshot of all major projections made on GHG emissions, oil displacement, or market penetration rates of EV technologies. From the extensive data found in relevant publications, the key assumptions that drive each report's analysis are identified and 'apples-to-apples' comparisons between all major report conclusions are attempted. The general approach that was taken in this comparative study is comprised of six primary

  11. Technology as a Time Challenge: Study, Concept and Types of Technology

    Directory of Open Access Journals (Sweden)

    Vadim M. Rozin

    2017-09-01

    Full Text Available In the article divorce the concepts of engineering and technology. Designated four stages of technological development: the fi rst phase — “pilot technique”, it is characterized by magical conceptualization, the second — engineering (rational conceptualization, third design, fourth technology. For technical equipment is characterized by four features: technology is the artifacts, the technique can be considered as a “social body” of a person or society, technology is a useful way to use the forces of nature, and fi nally, the mediation in the form of tools, machines, and material environment that allows you to implement the ideas of man. It is argued that the conceptualization of technology is the essential characteristic of the concept. If you write, for example, about the technology of the Neolithic age or era of construction of the Egyptian pyramids, then we are talking about retrospective interpretation, from the point of view of modern understanding of technology. It’s not useless, for example, to determine preconditions of formation technology, but in terms of thinking creates problems and contradictions. The author argues that technology develops in the second half of the eighteenth century as a new reality, which describes the industrial activities in language operations and their conditions of division of labor and management. At the same time, technology is being characterized by the installation of quality, savings, standardization, and rational description of the production processes, their optimization for the training of new technologists. Discusses three stages of development of the technology and features of the main types of technology: production technology, engineering, large techno-social projects, global technology. Considering the author and the conditions of the development of new technologies. These include “technological zone of proximal development”, as well as two situation — relevant issues and

  12. Study for improvement of light water reactor technology, (3)

    International Nuclear Information System (INIS)

    Suzuki, Hideaki; Morita, Terumichi; Igarashi, Hiroshi; Tabata, Hiroaki

    1991-01-01

    The Japan Atomic Power Company has performed some studies, which are referred to as 'some feasibility studies of LWR technology', in order to help improve and up-grade the light water reactor technology. We would like to show the key results of the above studies in an orderly fashion in this document. As the third issue, this paper describes the study of the feasibility of applying a suppression pool system in a 4-loop PWR plant in order to reduce containment volume and evaluates the merits of such a system. The results confirmed the feasibility of such a plant consisting of a 4-loop plant with a suppression pool system. The expected merits of a suppression pool type PWR are as follows: (1) The volume within the containment boundary is half of that for the conventional plant. This reduces the material quantity substantially. (2) A wider layout space is obtained since the operating floor is located outside the containment are. And this improves the maneuverability of plant outage. (3) Low center of gravity of the plant contributes to improving the ability to withstand seismic activity. Although there are some open items left that should be confirmed, we consider that PWR with small CV is an appealing plant in the light of further sales points such as relaxing siting conditions, extending the use of robotics and so on. (author)

  13. Crucial design issues for special access technology; a Delphi study.

    Science.gov (United States)

    O'Rourke, Pearl; Ekins, Ray; Timmins, Bernard; Timmins, Fiona; Long, Siobhan; Coyle, Eugene

    2014-01-01

    To develop and demonstrate a method to involve professional users of assistive technology (AT) in the development process of customisable products. Employing the ideas of user participation and mass customisation, this research addresses the need for reduced product costs and optimised product flexibility. An adaptable six-question Delphi study was developed to establish consensus among AT professionals on design issues relating to a specified AT domain requiring innovation. The study is demonstrated for the special access technology (SAT) domain. A modified morphological matrix structures the application of the study results to the product design process. Fourteen professionals from the Republic of Ireland and the UK participated. Consensus was reached on prevalent parts of SAT that malfunction, primary reasons for SAT malfunction, characteristics of clients associated with SAT selection, client needs regarding SAT use and training, desirable traits of SAT and clinicians' frustrations with SAT. The study revealed a range of problems related to SAT, highlighting the complexities of successful SAT adoption. The questions led to differentiated insights and enabled design solution conceptualisation from various perspectives. The approach was found to help facilitate efficient generation and application of professional users' knowledge during the design process of customisable AT.

  14. Enabling Logistics With Portable and Wireless Technology Study. Volume 1

    Science.gov (United States)

    2004-08-06

    Players41 Tag Vendors Reader Vendors Software Players Early Adopters Alien Technology Corporation Intermec Technologies Corp. Descartes Systems...e at pa ion rt s s /st be an co d m ar e ds s rene l availability of interopera le s e demands of EPC isc ot a bro f a er b labl as te is, c...Intermec Technologies Corp. Descartes Systems Boeing Intermec Technologies Corp. Matrics Inc. EXE Technologies CHEP Matrics Inc. Psion Teklogix Inc

  15. A Study on Test Technology to Diagnose the Power Apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K H; Kang, Y S; Jeon, Y K; Lee, W Y; Kang, D S; Kyu, H S; Sun, J H; Jo, K H [Korea Electrotechnology Research Institute (Korea, Republic of); Jung, J S; Mun, Y T; Lee, K H; Jung, E H; Kim, J H [Korea Water Resources Corporation (Korea, Republic of)

    1997-02-01

    In this study, we have educated KOWACO(Korea Water Resources Corporation) specialists about the insulation diagnostic technology and trained them the insulation diagnostic test and estimation method of power apparatus. The main results of this study are as follows; A. Education of basic high-voltage engineering. B. Research of insulation characteristic and deterioration mechanism in power apparatus C. Discussion on high-voltage test standard specifications. D. Study on insulation deterioration diagnostics in power apparatus. E. Field testing of insulation diagnosis in power apparatus. F. Engineering of insulation diagnostic testing apparatus to diagnose power apparatus. KOWACO specialists are able to diagnose insulation diagnostic test of power apparatus through this study. As they have instruments to diagnose power apparatus, they can do the test and estimation of the power apparatus insulation diagnosis. (author). refs., figs., tabs.

  16. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  17. REVIEW OF EXISTING LCA STUDIES ON WASTE WATER TREATMENT TECHNOLOGIES

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hauschild, Michael Zwicky

    The EU research project “NEPTUNE” is related to the EU Water Framework Directive and focused on the development of new waste water treatment technologies (WWTT) for municipal waste water. The sustainability of these WWTTs is going to be assessed by the use of life cycle assessment (LCA). New life...... importance of the different life cycle stages and the individual impact categories in the total impact from the waste water treatment, and the degree to which micropollutants, pathogens and whole effluent toxicity have been included in earlier studies. The results show that more than 30 different WWTT (and...

  18. The role of nuclear data for fusion technology studies

    International Nuclear Information System (INIS)

    Forrest, Robin A.

    2011-01-01

    Highlights: → Nuclear data are of fundamental importance in studies of nuclear technology. → Data libraries cover: experiments (EXFOR), theory (RIPL) and evaluations (ENDF). → Libraries are general purpose or special purpose (decay, dosimetry and activation). → Activation files contain many reactions, only a fraction needs to be known precisely. → Covariance data are important, but details of formatting are being worked out. - Abstract: Nuclear data are of fundamental importance in studies of nuclear technology. In these studies, experiments to measure cross sections and decay properties and simulations of the design of fission power plants, fusion devices and accelerators are included. The large amount of data required is stored in computer readable formats in data libraries and the most common of these are the general purpose files used for neutronics or transport calculations. These files also contain the standards against which most measurements are made. The other class of libraries are the special purpose ones containing decay data, fission yields and cross section data for dosimetry and activation. This paper gives examples of what data are available and describes their use for various fusion applications. The focus will be on neutron-induced activation data with examples of how the reactions of particular importance can be identified. All data should be accompanied by estimates of the uncertainty. This is best achieved by including covariance data; however, this is extremely challenging and only a subset of the available data has such uncertainty data. The general principles of how covariance matrices are used are outlined.

  19. Technology and the study of wildfire: Middle school students study the impacts of wildfire

    Science.gov (United States)

    Fox-Gliessman, D.; Kerski, J.J.

    2005-01-01

    Various technologies that can assist students in exploring the human and environmental impacts of wildfire and in communicating their findings are discussed. Wildfires occur in many parts of the world, and provide an excellent opportunity for students to study local and global interdisciplinary issues using technology. Prior to the beginning of the field study, students take instructions in both their math and science classes about the distinction and appropriate uses of quantitative and qualitative data. Use of computer programs such as Excel spreadsheets which can contain data, and interaction of research and technology group with students, can help them collect best of the information and in making an accurate report.

  20. Effective Information Technology Governance Mechanisms: An Australian Study

    Directory of Open Access Journals (Sweden)

    Syaiful Ali

    2006-01-01

    Full Text Available Growing importance of information technology (IT, as a strategic factor for organizations in achieving their objectives, have raised the concern of organizations in establishing and implementing effective IT governance. This study seeks to empirically examine the individual IT governance mechanisms that influence the overall effectiveness of IT governance. The data were obtained by using web based survey from 176 members of ISACA (Information Systems and Audit Control Association Australia. This study examines the influences of six proposed IT governance mechanisms on the overall effectiveness of IT governance. Using Factor Analysis and Multiple Regression techniques, the current study finds significant positive relationships between the overall level of effective IT governance and the following four IT governance mechanisms: the existence of ethics/ culture of compliance in IT, corporate communication systems, an IT strategy committee, and the involvement of senior management in IT.

  1. Technological feasibility studies on combination treatments for subtropical fruits

    International Nuclear Information System (INIS)

    Brodrick, H.T.; Linde, H.J. van der

    1981-01-01

    Research with subtropical fruits such as papayas and mangoes had advanced beyond the experimental stage in South Africa. This may be attributed to the potential economic benefits likely to be obtained from the combination of heat and irradiation treatments. The outcome of recent marketing trials, however, revealed several problem areas which need further investigation. Some of these problems were studied in greater detail and are reported in this presentation. The effect of time delays between hot-water and irradiation treatments on the efficacy in disease control in the fruit, has received particular attention in the investigations. Efforts have also been made to correlate these results with those obtained in fungal studies in the laboratory. These and other factors relating to the technological feasibility in the use of combined treatments for the preservation of mangoes and papayas are discussed and recommendations or guidelines for future studies are given in this paper. (author)

  2. Variable Cycle Engine Technology Program Planning and Definition Study

    Science.gov (United States)

    Westmoreland, J. S.; Stern, A. M.

    1978-01-01

    The variable stream control engine, VSCE-502B, was selected as the base engine, with the inverted flow engine concept selected as a backup. Critical component technologies were identified, and technology programs were formulated. Several engine configurations were defined on a preliminary basis to serve as demonstration vehicles for the various technologies. The different configurations present compromises in cost, technical risk, and technology return. Plans for possible variably cycle engine technology programs were formulated by synthesizing the technology requirements with the different demonstrator configurations.

  3. Commercialization of new energy technologies. Appendix A. Case study 1: central station electric power generation technologies

    International Nuclear Information System (INIS)

    1976-06-01

    The results of a survey on Technologies for Central Power Generation are presented. The central power generation technologies selected for consideration were: fusion; breeder reactors; solar electric (thermal); geothermal; and magnetohydrodynamics. The responses of industry executives who make key investment decisions concerning new energy technologies and who to identify the problems faced in the development and commercialization of new energy systems are presented. Evaluation of these responses led to the following recommendations: increase industry input into the R, D and D planning process; establish and advocate priorities for new technologies based on detailed analysis of a technology's value in terms of overall national goals; create a mechanism for a joint ERDA/industry appraisal of priorities and programs; increase level of federal funding or subsidy of new technology demonstrations; and focus the activities of the national laboratories on basic research and very early product development; and emphasize industry involvement in systems development

  4. A Study on the Linkage between Nano Fusion Technology and Nuclear Technology

    International Nuclear Information System (INIS)

    Jeong, Ik; Lim, Chae Young; Lee, Jong Hee

    2009-02-01

    1) A survey of national energy policy trends in major nation - to secure renewal energy in the level of making a plan to supply national energy in the future - Tendency of energy policy based on Europe 2) A survey of the nano technology development - Status of major nano technology development - Developmental direction of nano technology related to nuclear energy 3) the nano technology development related with nuclear - high-temperature nuclear reactor by applying nano science and technology under quick development - materials required to high-level radioactive wastes treatment facility - develop materials of nuclear fusion facility in the long-term view 4) Innovation system of nano technology - Energy source -> conversion to energy -> distribution of energy -> energy storage -> energy use

  5. Miniaturized Power Processing Unit Study: A Cubesat Electric Propulsion Technology Enabler Project

    Science.gov (United States)

    Ghassemieh, Shakib M.

    2014-01-01

    This study evaluates High Voltage Power Processing Unit (PPU) technology and driving requirements necessary to enable the Microfluidic Electric Propulsion technology research and development by NASA and university partners. This study provides an overview of the state of the art PPU technology with recommendations for technology demonstration projects and missions for NASA to pursue.

  6. Water Desalination Studies Using Forward Osmosis Technology, A Review

    International Nuclear Information System (INIS)

    Abou El-Nour, F.H.

    2016-01-01

    Fresh water and energy shortage represent a great challenge facing the whole world now. To cover the global water demand, an energy-efficient approach is required to be applied in the suitable technology to achieve the shortage in the fresh water demand. Different techniques are used to solve this problem. A mong the different methods applied to desalinate seawater is the osmosis technologies . Although reversible osmosis (RO) is the most familiar method used for this purpose, forward osmosis (FO) represents a more suitable technique due to several arguments including low energy cost. The present study represents the use of FO technique for water desalination with adsorption regeneration. In this respect, a self-prepared granular active carbon produced from dates is to be used as an adsorbent agent. The physical characteristics of the active carbon are studied such as BET specific surface area, pore size, particle size and the structure using scanning electron microscope (SEM). Different advanced apparatus are used for such measurements. In addition, the adsorption is otherms (Langmuier and Freundlich) are established to explain the adsorption mechanism of the process. Accordingly, the review includes essential information and sufficient backgrounds in the field of desalination using FO or simply direct osmosis, which overcome the different difficulties present in reversible RO

  7. Study and practice of flipped classroom in optoelectronic technology curriculum

    Science.gov (United States)

    Shi, Jianhua; Lei, Bing; Liu, Wei; Yao, Tianfu; Jiang, Wenjie

    2017-08-01

    "Flipped Classroom" is one of the most popular teaching models, and has been applied in more and more curriculums. It is totally different from the traditional teaching model. In the "Flipped Classroom" model, the students should watch the teaching video afterschool, and in the classroom only the discussion is proceeded to improve the students' comprehension. In this presentation, "Flipped Classroom" was studied and practiced in opto-electronic technology curriculum; its effect was analyzed by comparing it with the traditional teaching model. Based on extensive and deep investigation, the phylogeny, the characters and the important processes of "Flipped Classroom" are studied. The differences between the "Flipped Classroom" and the traditional teaching model are demonstrated. Then "Flipped Classroom" was practiced in opto-electronic technology curriculum. In order to obtain high effectiveness, a lot of teaching resources were prepared, such as the high-quality teaching video, the animations and the virtual experiments, the questions that the students should finish before and discussed in the class, etc. At last, the teaching effect was evaluated through analyzing the result of the examination and the students' surveys.

  8. Blind Technology Transfer or Technological Knowledge Leakage: a Case Study from the South

    Directory of Open Access Journals (Sweden)

    Dario Codner

    2012-07-01

    Full Text Available Blurring boundaries between science and technology is a new phenomenon especially in fields such as biotechnology. The present work shows the fate of biotech research papers on foreign patents produced during the last decade in Quilmes National University. It aims at recognizing the flow of scientific knowledge developed at a public university towards foreign companies and organizations as well as reflecting on its technological value, the role of technology transfer management, the institutional significance of technology transfer processes and the need to develop innovative public policies for solving structural failures caused by industrial underdevelopment

  9. Technology Leadership of Education Administrators and Innovative Technologies in Education: A Case Study of Çorum City

    Science.gov (United States)

    Kör, Hakan; Erbay, Hasan; Engin, Melih

    2016-01-01

    In this global world in which educational technologies have developed at such a great pace, it is possible to say that administrators in the education sector are obliged with serious roles with regard to keeping up with the evolving technology and the management of education in this virtual environment. In the present study utilizing screening…

  10. The diffusion of medical technology, local conditions, and technology re-invention: a comparative case study on coronary stenting.

    Science.gov (United States)

    Hashimoto, Hideki; Noguchi, Haruko; Heidenreich, Paul; Saynina, Olga; Moreland, Abigail; Miyazaki, Shunichi; Ikeda, Shunya; Kaneko, Yoshihiro; Ikegami, Naoki

    2006-12-01

    Innovation of medical technology is a major driving force behind the increase in medical expenditures in developed countries. Previous studies identified that the diffusion of medical technology varied across countries according to the characteristics of regulatory policy and payment systems. Based on Roger's diffusion of innovation theory, this study purported to see how local practice norms, the evolving nature of diffusing technology, and local clinical needs in addition to differences in politico-economic systems would affect the process of innovation diffusion. Taking a case of coronary stenting, an innovative therapeutic technology in early 1990s, we provided a case study of hospital-based data between two teaching high-tech hospitals in Japan and the US for discussion. Stenting began to be widely used in both countries when complementary new technology modified its clinical efficacy, but the diffusion process still differed between the two hospitals due to (1) distinctive payment systems for hospitals and physicians, (2) practice norms in favor of percutaneous intervention rather than bypass surgery that was shaped by payment incentives and cultural attitudes, and (3) local patient's clinical characteristics that the technology had to be tailored for. The case study described the diffusion of stent technology as a dynamic process between patients, physicians, hospitals, health care systems, and technology under global and local conditions.

  11. A preliminary study of current multimedia information technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.C.

    1997-03-01

    This paper surveys more than 70 articles published in the IEEE Multimedia journal and other journals. The survey summarizes aspects of multimedia information technology and categorizes application areas of multimedia information technology and interesting research areas related to it.

  12. Cleaner technology diffusion: case studies, modeling and policy. Editorial

    NARCIS (Netherlands)

    Montalvo Corral, C.; Kemp, R.

    2008-01-01

    The development and application of cleaner technologies (environmental technologies) offer multiple benefits for the adopter: reduced emissions, less waste and cost savings from reduced resource use and savings on waste costs. The question here is: if cleaner technologies offer such great benefits

  13. Technology Use in a Japanese Immersion School: A Case Study.

    Science.gov (United States)

    Ketterer, Kimberley; Giannone, Darby

    1996-01-01

    Examines the uses of technology at Yujin Gakuen, a public elementary-level Japanese language immersion school located in Eugene, Oregon. Discusses goals that can be achieved through cooperative learning and instructional technology use, equipment and software, areas in which technology training and integration takes place, the role of educators,…

  14. Practice Theory and Pragmatism in Science & Technology Studies

    DEFF Research Database (Denmark)

    Buch, Anders

    2015-01-01

    begin by an introduction to some of the proponents of practice theory and of pragmatism. Regarding the latter, I primarily present work by Dewey because this is what I am most familiar with. Although I recognize that practice theory and pragmatism differ on fundamental philosophical issues in relation...... to the normative evaluation of action, I show that the two intellectual traditions have much in common when it comes to what they do to STS studies. After this introduction to practice theory, my paper will proceed in the following steps. Firstly, I will briefly survey practice theoretical and pragmatist......Science & Technology Studies (STS) and social science has made a turn, a ‘practice turn’, and the notion ‘practice theory’ has made its way into the field of STS. But it is notable that proponents of this turn and theory rarely mention American pragmatism as a source of inspiration or refer...

  15. [Study on extraction and purification technology of Hubei ophiopogon saponins].

    Science.gov (United States)

    Lin, Yun-Han; Li, Chong-Ming; Li, Xiao-Dong; Xiang, Yang; Zhang, Ya-Qin; Zhang, Xiao-Cun; Liu, Xia

    2013-05-01

    To explore the extraction and purification technology of total saponins from the effective parts of Liriope spicata. Orthogonal design was used. Macroporous resin was selected to separate and purify total saponin from the effective parts of Liriope spicata. The process validation was conducted. The total saponins was determined by Ultraviolet Spectrophotometry. The optimal extraction conditions were as follows: 10 times the amount of ethanol (70%) for each occasion and hot reflux (3 x 2 h). Total saponins was purified by D101 macroporous resin. The concentration of eluting ethanol was 50% - 70%. Ethanol (70%) was selected as the best eluent. The result of process validation was consistent with the study. The process is simple and stable enough to significantly improve the extraction rate of the effective parts. The study can provide reference for the research and production of effective parts of traditional Chinese medicine such as Liriope spicata.

  16. Nuclear Criticality Technology and Safety Project parameter study database

    International Nuclear Information System (INIS)

    Toffer, H.; Erickson, D.G.; Samuel, T.J.; Pearson, J.S.

    1993-03-01

    A computerized, knowledge-screened, comprehensive database of the nuclear criticality safety documentation has been assembled as part of the Nuclear Criticality Technology and Safety (NCTS) Project. The database is focused on nuclear criticality parameter studies. The database has been computerized using dBASE III Plus and can be used on a personal computer or a workstation. More than 1300 documents have been reviewed by nuclear criticality specialists over the last 5 years to produce over 800 database entries. Nuclear criticality specialists will be able to access the database and retrieve information about topical parameter studies, authors, and chronology. The database places the accumulated knowledge in the nuclear criticality area over the last 50 years at the fingertips of a criticality analyst

  17. The Adoption of Grid Computing Technology by Organizations: A Quantitative Study Using Technology Acceptance Model

    Science.gov (United States)

    Udoh, Emmanuel E.

    2010-01-01

    Advances in grid technology have enabled some organizations to harness enormous computational power on demand. However, the prediction of widespread adoption of the grid technology has not materialized despite the obvious grid advantages. This situation has encouraged intense efforts to close the research gap in the grid adoption process. In this…

  18. Study on mineral processing technology for abrasive minerals

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seong Woong; Yang, Jung Il; Hwang, Seon Kook; Choi, Yeon Ho; Cho, Ken Joon; Shin, Hee Young [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

    1995-12-01

    Buyeo Materials in Buyeogun, Choongnam province is a company producing feldspar concentrate, but does not yet utilize the garnet as abrasive material and other useful heavy minerals wasted out from the process of feldspar ore. The purpose of this study is to develop technology and process for the recovery of garnet concentrate. As results, the garnet is defined as ferro manganese garnet. The optimum process for recovery of garnet concentrate is to primarily concentrate heavy minerals from tailings of feldspar processing. And secondly the heavy minerals concentrated is dried and separated garnet concentrate from other heavy minerals. At this time, the garnet concentrate is yield by 0.176%wt from 0.31%wt of heavy minerals in head ore. The garnet concentrate contains 33.35% SiO{sub 2}, 12.20% Al{sub 2}O{sub 3}, 28.47% Fe{sub 2}O{sub 3}, 11.96% MnO. As for utilization of abrasive materials, a fundamental data was established on technology of grinding and classification. (author). 13 refs., 47 figs., 24 tabs.

  19. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  20. Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

    Directory of Open Access Journals (Sweden)

    Abdullah Konak

    2016-12-01

    Findings\tThe findings of the study supported that collaborative work could improve non-technology students’ acceptance of RVCLs. However, no significant effect of collaborative work on technology acceptance was observed in the case of technology students. Recommendations for Practitioners\tEducators should consider the benefits of collaborative work while introducing a new technology to students who may not have background in the technology introduced. Recommendation for Researchers In this study, student technological background was found to be a significant factor for technology acceptance; hence, it is recommended that technological background is included in TAM studies as an external factor. Future Research\tRepeating similar studies with multiple exercises with varying degrees of challenge is required for a better understanding of how collaborative work and student technological background affect technology acceptance.

  1. Enacting Disability: How Can Science and Technology Studies Inform Disability Studies?

    Science.gov (United States)

    Galis, Vasilis

    2011-01-01

    This paper aims to discuss how science and technology studies (STS) can inform disability studies and challenge dominant approaches, such as the medical and the social models, in the ordering and representation of disability. Disability studies and STS have followed somewhat parallel paths in the history of ideas. From a positivist approach to…

  2. A phylogenetic study of Boletus section Boletus in Europe

    NARCIS (Netherlands)

    Beugelsdijk, D.C.M.; Linde, van der S.; Zuccarello, G.C.; Bakker, den H.C.

    2008-01-01

    A phylogenetic study of the species in Boletus sect. Boletus was undertaken using the molecular markers ITS1-5.8S-ITS2 and Gap dh. Four well-supported lineages, one comprising Boletus edulis s.l., the others referring to B. aereus, B. reticulatus and B. pinophilus have been distinguished. The ML and

  3. Past speculations of future health technologies: a description of technologies predicted in 15 forecasting studies published between 1986 and 2010.

    Science.gov (United States)

    Doos, Lucy; Packer, Claire; Ward, Derek; Simpson, Sue; Stevens, Andrew

    2017-07-31

    To describe and classify health technologies predicted in forecasting studies. A portrait describing health technologies predicted in 15 forecasting studies published between 1986 and 2010 that were identified in a previous systematic review. Health technologies are classified according to their type, purpose and clinical use; relating these to the original purpose and timing of the forecasting studies. All health-related technologies predicted in 15 forecasting studies identified in a previously published systematic review. Outcomes related to (1) each forecasting study including country, year, intention and forecasting methods used and (2) the predicted technologies including technology type, purpose, targeted clinical area and forecast timeframe. Of the 896 identified health-related technologies, 685 (76.5%) were health technologies with an explicit or implied health application and included in our study. Of these, 19.1% were diagnostic or imaging tests, 14.3% devices or biomaterials, 12.6% information technology systems, eHealth or mHealth and 12% drugs. The majority of the technologies were intended to treat or manage disease (38.1%) or diagnose or monitor disease (26.1%). The most frequent targeted clinical areas were infectious diseases followed by cancer, circulatory and nervous system disorders. The most frequent technology types were for: infectious diseases-prophylactic vaccines (45.8%), cancer-drugs (40%), circulatory disease-devices and biomaterials (26.3%), and diseases of the nervous system-equally devices and biomaterials (25%) and regenerative medicine (25%). The mean timeframe for forecasting was 11.6 years (range 0-33 years, median=10, SD=6.6). The forecasting timeframe significantly differed by technology type (p=0.002), the intent of the forecasting group (p<0.001) and the methods used (p<001). While description and classification of predicted health-related technologies is crucial in preparing healthcare systems for adopting new innovations

  4. Current Highlights on ESA's Planetary Technology Reference Studies

    Science.gov (United States)

    Falkner, P.

    The concept of Technology Reference Studies has been introduced already at EGU05, where the Venus Entry Probe (VEP), the Jupiter Minisat Explorer (JME), the Deimos Sample Return (DSR) and the Interstellar Heliopause Probe (IHP) have been presented in detail. At the EGU06 the new studies in reaction to the Cosmic Vision exercise have been introduced. The formulation of themes and mapping into potential future missions has been taken as basis in the planning of additional new and adaptation of existing TRS's to cover areas, which have not yet been addressed by any TRS. These new ongoing studies are progressing well and current highlights will be presented in the paper in further detail as well as an overview on supporting technology studies and Concurrent Design Facility (CDF) sessions. The Jupiter System Explorer (JSE) study investigates mission concepts with up to two Magnetospheric Orbiters placed in a highly elliptical Jovian orbit and the possibility to deploy a Jovian Entry Probe. The mission profile is based on a solar powered concept launched on a Soyuz-Fregat launcher. Mission analysis and the application of a new Jovian radiation model are supporting the study activities. The Near-Earth Asteroid Sample Return (NEA-SR) concept explores the possibilities of sample return or in-situ mission profiles with visits to up to two NEA targets. Due to the assumed low cost cap a trade between a sample return and remote/in-situ exploration concept has a high attention in the study. The Cross Scale TRS (CS-TRS) is intended to simultaneously investigate magnetospheric and plasma processes in three spatial scales with a formation flight of up to 12 spacecraft, orbiting on deep elliptical orbits around Earth. One of the major challenges is the launch of that number of spacecraft on a single launcher and the collisionless deployment of the formation at the target orbit. The scope if the GeoSail TRS is to demonstrate deployment, attitude control and navigation concepts for a

  5. The interplay between standardization and technological change : a study on wireless technologies, technological trajectories, and essential patent claims

    NARCIS (Netherlands)

    Bekkers, R.N.A.; Martinelli, A.

    2010-01-01

    In many technology fields, standardization is the primary method of achieving alignment between actors. Especially if strong network effects and increasing returns are present, the market often ends up with a single standard that dominates the technical direction, activities and search heuristics,

  6. Constructivism as a Theoretical Foundation for the Use of Technology in Social Studies

    Science.gov (United States)

    Doolittle, Peter E.; Hicks, David

    2003-01-01

    The National Council for the Social Studies has explicitly advocated technology integration into the social studies classroom to transform the teaching and learning of key social studies content and skills. While the call for technology integration into the social studies classroom is clear, the application of technology within the realm of social…

  7. Nuclear microbeam study of advanced materials for fusion reactor technology

    International Nuclear Information System (INIS)

    Alves, L.C.; Alves, E.; Grime, G.W.; Silva, M.F. da; Soares, J.C.

    1999-01-01

    The Oxford scanning proton microprobe was used to study SiC fibres, SiC/SiC ceramic composites and Be pebbles, which are some of the most important materials for fusion technology. For the SiC materials, although the results reveal a high degree of homogeneity and purity in the composition of the fibres, some grains containing heavy metals were detected in the composites. Rutherford backscattering analysis further allowed establishing that at least some of these grains are not on the surface of the material but rather distributed throughout the bulk of the SiC composites. The two different types of Be pebbles analysed also showed very different levels of contaminants. The information obtained with the microbeam analysis is confronted with the one resulting from the broad beam PIXE and RBS analysis

  8. Study on Dynamic Alignment Technology of COIL Resonator

    International Nuclear Information System (INIS)

    Xiong, M D; Zou, X J; Guo, J H; Jia, S N; Zhang, Z B

    2006-01-01

    The performance of great power chemical oxygen-iodine laser (COIL) beam is decided mostly by resonator mirror maladjustment and environment vibration. To improve the performance of light beam, an auto-alignment device is used in COIL resonator, the device can keep COIL resonator collimating by adjusting the optical components of resonator. So the coupling model of COIL resonator is present. The multivariable self study fuzzy uncoupling arithmetic and six-dimensional micro drive technology are used to design a six-input-three-output uncoupling controller, resulting in the realization of the high precision dynamic alignment. The experiments indicate that the collimating range of this system is 8 mrad, precision is 5 urad and frequency response is 20Hz, which meet the demand of resonator alignment system

  9. Development and Validation of Information Technology Mentor Teacher Attitude Scale: A Pilot Study

    Science.gov (United States)

    Saltan, Fatih

    2015-01-01

    The aim of this study development and validation of a teacher attitude scale toward Information Technology Mentor Teachers (ITMT). ITMTs give technological support to other teachers for integration of technology in their lessons. In the literature, many instruments have been developed to measure teachers' attitudes towards the technological tools…

  10. Energy and cost savings results for advanced technology systems from the Cogeneration Technology Alternatives Study /CTAS/

    Science.gov (United States)

    Sagerman, G. D.; Barna, G. J.; Burns, R. K.

    1979-01-01

    The Cogeneration Technology Alternatives Study (CTAS), a program undertaken to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the 1985-2000 time period, is described, and preliminary results are presented. Two cogeneration options are included in the analysis: a topping application, in which fuel is input to the energy conversion system which generates electricity and waste heat from the conversion system is used to provide heat to the process, and a bottoming application, in which fuel is burned to provide high temperature process heat and waste heat from the process is used as thermal input to the energy conversion system which generates energy. Steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics are examined. Expected plant level energy savings, annual energy cost savings, and other results of the economic analysis are given, and the sensitivity of these results to the assumptions concerning fuel prices, price of purchased electricity and the potential effects of regional energy use characteristics is discussed.

  11. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    OpenAIRE

    Roisin P. Corcoran; Steven M. Ross; Beverly J. Irby; Fuhui Tong; Rafael Lara-Alecio; Cindy Guerrero

    2014-01-01

    This paper describes the use of technology to provide virtual professional development (VPD) for teachers and to conduct classroom observations in a study of English Language Learner (ELL) instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT) design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral l...

  12. A Case Study of the Application of SAMR and TPACK for Reflection on Technology Integration into Two Social Studies Classrooms

    Science.gov (United States)

    Hilton, Jason Theodore

    2016-01-01

    As emerging technology continues to enter the social studies classroom, teachers need to approach integration of such technology in a systematic manner to ensure that such technology enhances the learning of their students. Currently, scholars of technology integration advocate for the use of one of two different models, either SAMR or TPACK. This…

  13. Entrepreneurship Education: An Experimental Study with Information and Communication Technology

    Directory of Open Access Journals (Sweden)

    Yenchun Jim Wu

    2018-03-01

    Full Text Available Entrepreneurship has been regarded as a new science in the promotion of economic development, which has led to rapid development in entrepreneurship education. The growing number of students enrolled in entrepreneurship programs creates unprecedented challenges on educators. Although multiple teaching and learning activities are adopted in entrepreneurship education, these are mainly carried out using traditional classroom lectures, case studies and group discussions. Nowadays, information & communication technology (ICT is used to enhance the effectiveness of traditional teaching methods and competency training. PowToon is a web-based ICT tool that hat allows teachers and students to quickly and easily create animated presentations. Using quasi-experimental design and qualitative method, this study is to examine whether PowToon is an effective tool for business plan presentation. The study find that the animated presentations attracted more investment than the groups that did not prepare animated videos. It reflects that developed videos which helps entrepreneurial team to better deliver their business ideas to investors in a well-thought out way. In addition, the results of the study show that individuals who generate a business idea did not necessarily significantly influence their investment decisions. Our findings challenge the concept on self-biases evaluations of the economic potential of their own business ideas. Finally, the students were very willing to adopt new ways of delivering their business ideas.

  14. Remote monitoring technologies for the prevention of metabolic syndrome: the Diabetes and Technology for Increased Activity (DaTA) study.

    Science.gov (United States)

    Stuckey, Melanie; Fulkerson, Robyn; Read, Emily; Russell-Minda, Elizabeth; Munoz, Claudio; Kleinstiver, Peter; Petrella, Robert

    2011-07-01

    Remote monitoring technologies are ideally suited for rural communities with limited access to health care. In an 8-week pilot study, we examined the feasibility of implementing and conducting a technology-intensive intervention in an underserviced rural setting. Our goal was to test the utility of self-monitoring technologies, physical activity, and education as tools to manage health indicators for the development of the cardiovascular complications (CVCs) of type 2 diabetes. The Diabetes and Technology for Increased Activity study was an open single-center study conducted in a community-based research setting. All 24 participants were provided with a Blackberry™ Smartphone, blood pressure monitor, glucometer, and pedometer. Smartphones transmitted measurements and survey results to the database, interfaced participants with the clinical team, and allowed for self-monitoring. Outcomes were improved body composition, improved markers of CVC risk factors, increased daily exercise, and interest in or awareness of lifestyle changes that impact health outcomes. Participants had excellent compliance for measurements, as self-monitoring provided a sense of security that improved from week 4 to week 8. Our team gained substantial insight into the operational requirements of technology-facilitated health care, including redefined hours of service; data reporting, management, and access protocols; and the utility of real-time clinical measures by remote monitoring. We developed an understanding of knowledge translation strategies as well as successful motivational and educational tools. Importantly, remote monitoring technology was found to be feasible and accepted in a rural setting. © 2011 Diabetes Technology Society.

  15. Leak detection, monitoring, and mitigation technology trade study update

    International Nuclear Information System (INIS)

    HERTZEL, J.S.

    1998-01-01

    This document is a revision and update to the initial report that describes various leak detection, monitoring, and mitigation (LDMM) technologies that can be used to support the retrieval of waste from the single-shell tanks (SST) at the Hanford Site. This revision focuses on the improvements in the technical performance of previously identified and useful technologies, and it introduces new technologies that might prove to be useful

  16. Support of Study on Engineering Technology from Physics and Mathematics

    OpenAIRE

    Mynbaev, Djafar K.; Cabo, Candido; Kezerashvili, Roman Ya.; Liou-Mark, Janet

    2008-01-01

    An approach that provides students with an ability to transfer learning in physics and mathematics to the engineering-technology courses through e-teaching and e-learning process is proposed. E-modules of courses in mathematics, physics, computer systems technology, and electrical and telecommunications engineering technology have been developed. These modules being used in the Blackboard and Web-based communications systems create a virtual interdisciplinary learning community, which helps t...

  17. Leak detection, monitoring, and mitigation technology trade study update

    Energy Technology Data Exchange (ETDEWEB)

    HERTZEL, J.S.

    1998-11-10

    This document is a revision and update to the initial report that describes various leak detection, monitoring, and mitigation (LDMM) technologies that can be used to support the retrieval of waste from the single-shell tanks (SST) at the Hanford Site. This revision focuses on the improvements in the technical performance of previously identified and useful technologies, and it introduces new technologies that might prove to be useful.

  18. Health information management using optical storage technology: case studies.

    Science.gov (United States)

    Kohn, D

    1992-05-01

    All the health care facilities examined in the case studies addressed several important organizational issues before and during the installation of their systems. All the facilities examined employee commitment. The prudent managers considered how easily their employees adapt to changes in their jobs and work environment. They considered how enthusiastic cooperation can be fostered in the creation of a liberated and reengineered office. This was determined not only by each individual's reaction to change, but also by the health care facility's track record with other system installations. For example, document image, diagnostic image, and coded data processing systems allow the integration of divergent health care information systems within complex institutions. Unfortunately, many institutions are currently struggling with how to create an information management architecture that will integrate their mature systems, such as their patient care and financial systems. Information managers must realize that if optical storage technology-based systems are used in a strategic and planned fashion, these systems can act as focal points for systems integration, not as promises to further confuse the issue. Another issue that needed attention in all the examples was the work environment. The managers considered how the work environment was going to affect the ability to integrate optical image and data systems into the institution. For example, many of these medical centers have created alliances with clinics, HMOs, and large corporate users of medical services. This created a demand for all or part of the health information outside the confines of the original institution. Since the work environment is composed of a handful of factors such as merged medical services, as many work environment factors as possible were addressed before application of the optical storage technology solution in the institutions. And finally, the third critical issue was the organization of work

  19. Application study of nuclear technologies for dual use

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jae Gon; Chung, W. S.; Park, W. S.; Lee, K. W.; Cha, H. K.; Han, M. H.; Yoon, J. S.; Honh, D. H.; Park, J. Y.; Lee, C. H.; Yeo, J. W.; Jung, M.; Ra, G. H

    2000-02-01

    The projects for the joint development of technology common to the civilian and military sectors are being carried out at national level to maximize the utilization of limited resources. The technologies have been identified through a process which considered whether they are duplicates of the present military technology, whether they are necessary, and whether their realization is feasible. In addition, the problems surfaced during the identification process have been analyzed and suggestions to vitalize the military application of civilian nuclear technology are presented in the contexts of personal channel, institutional networking, R and D information exchange, and budgetary support. (author)

  20. The systematic risk study in technology companies at Brazil

    Directory of Open Access Journals (Sweden)

    Marcio Marcelo Belli

    2017-09-01

    Full Text Available This work tested if brasilian technology companies has a greater systematic risk than traditional companies in Brazil. For to achieve tje purpose, two companies samples , one of technology companies and the other of traditional companies, were composed. The tecnique employed was a multiple regression analysis considering a dichotomous variable wich represents the technological factor and another numerical variable wich represents the intangibility degree of  companies. As a dependent variable was considered the CAPM systematic risk. The results indicated that technology companies have a greater systematic risk than traditional companies regardless of the degree of intangibility.

  1. Field study of wastes from fluidized-bed combustion technologies

    International Nuclear Information System (INIS)

    Weinberg, A.; Holcombe, L.; Butler, R.

    1991-01-01

    The Department of Energy (DOE) has undertaken a research project to monitor advanced coal process wastes placed in natural geologic settings. The overall objective of the study is to gather field data on the engineering and environmental performance of disposed solid waste from various advanced coal processes. The coal ash from a fluidized-bed combustion unit is being studied as part of the DOE program. The unit is a 110-MW circulating fluidized bed (CFB) at Colorado Ute Electric Association's Nucla Steam Electric Station, which is being demonstrated with the support of the DOE Clean Coal Technology Program. The Electric Power Research Institute is cofunding the study. In June of 1989, a test cell approximately 100 feet square and 8 feet deep was constructed and filled with ash from the Colorado Ute CFB unit. The cell was instrumented with lysimeters and neutron probe access tubes to monitor water flow and leachate chemistry in the ash; groundwater wells and runoff collection devices were installed to determine the effects on groundwater and surface water quality, and a meteorological station was installed to determine the water balance. Additionally, tests are being performed to evaluate the chemical, physical, and mineralogical properties of the solid waste and geologic materials. Results from the first year of monitoring are presented

  2. Media business transformation based on information technology : A pilot study of three Swedish newspapers

    OpenAIRE

    Sadat Alavioon, Samin

    2017-01-01

    The newspaper industry has been transformed after the emergence of information technology. According to the transformation of media businesses by technology advancement this study realizes the importance of opportunities and threats brought by new information technology in the newspaper industry. Therefore, to develop an understanding of how the newspaper industry can transform due to technology advancement three research questions were answered; RQ 1. How can information technologies transfo...

  3. The Modified Technology Acceptance Model for Private Clinical Physicians: A Case Study in Malaysia, Penang

    OpenAIRE

    Annie Ng Cheng San; Choy Johnn Yee

    2013-01-01

    Malaysia’s private clinic is wealth creator. To enhance its sustainable future, healthcare Information Technology (IT) change is inevitable. However, its’ IT acceptance is limited. The past literatures showed physicians have different technology acceptance decision as compare to common users. Hence, understanding the physicians’ technology acceptance is critical for technology management success. This study aims to gauge the factors influence technology acceptance decision among the physician...

  4. Focus on Games & Simulations: Trends+Technologies+Case Studies

    Science.gov (United States)

    Weinstein, Margery

    2011-01-01

    A changing mindset combined with changing technology is driving the use of games and simulations. People are becoming more open to using games and simulations for learning, and, at the same time, the technologies are making the development of games and simulations easier and faster than a mere five years ago. Together, the changing mindset and the…

  5. Navigation studies based on the ubiquitous positioning technologies

    Science.gov (United States)

    Ye, Lei; Mi, Weijie; Wang, Defeng

    2007-11-01

    This paper summarized the nowadays positioning technologies, such as absolute positioning methods and relative positioning methods, indoor positioning and outdoor positioning, active positioning and passive positioning. Global Navigation Satellite System (GNSS) technologies were introduced as the omnipresent out-door positioning technologies, including GPS, GLONASS, Galileo and BD-1/2. After analysis of the shortcomings of GNSS, indoor positioning technologies were discussed and compared, including A-GPS, Cellular network, Infrared, Electromagnetism, Computer Vision Cognition, Embedded Pressure Sensor, Ultrasonic, RFID (Radio Frequency IDentification), Bluetooth, WLAN etc.. Then the concept and characteristics of Ubiquitous Positioning was proposed. After the ubiquitous positioning technologies contrast and selection followed by system engineering methodology, a navigation system model based on Incorporate Indoor-Outdoor Positioning Solution was proposed. And this model was simulated in the Galileo Demonstration for World Expo Shanghai project. In the conclusion, the prospects of ubiquitous positioning based navigation were shown, especially to satisfy the public location information acquiring requirement.

  6. Studies on fundamental technologies for producing tokamak-plasma

    International Nuclear Information System (INIS)

    Matsuzaki, Yoshimi

    1987-10-01

    The report describes studies on fundamental technologies to produce tokamak-plasma of the JFT-2 and JFT-2M tokamaks. (1) In order to measure the particle number of residual gases, calibration methods of vacuum gauges have been developed. (2) Devices for a Taylor-type discharge cleaning (TDC), a glow discharge cleaning (GDC) and ECR discharge cleaning (ECR-DC) have been made and the cleaning effects have been investigated. In TDC the most effective plasma for cleaning is obtained in the plasma with 5 eV of electron temperature. GDC is effective in removing carbon impurities, but is less effective for removing oxygen impurities. ECR-DC has nearly the similar effect as TDC. The cleaning effect of these three types were studied by comparing the properties of resulting tokamak plasmas in the JFT-2M tokamak. (3) Experimental studies of pre-ionization showed as following results; A simple pre-ionization equipment as a hot-electron-gun and a J x B gun was effective in reducing breakdown voltage. An ordinary mode wave of the electron cyclotron frequency was very effective for pre-ionization. The RF power whose density is 3.6 x 10 -2 W/cm 3 produced plasma of an electron density of 5 x 10 11 cm -3 . In this case, it is possible to start up with negligible consumption of the magnetic flux caused by the plasma resistance. (4) Concerning to studies on plasma control, the following results were obtained; In order to obtain constant plasma current, a pulse forming network was constructed and sufficient constant plasma current was achieved. In applying an iso-flux method for measuring the plasma position, it is no problem practically to use only one loop-coil and one magnetic probe. (author)

  7. Implementation of renewable technologies - Opportunities and barriers. Zimbabwe country study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Renewable Energy Technologies (RETS) have over the years become an integral part of the energy supply chain in most developed countries. Recent projections show that 13.5% of the world's primary energy supply comes from renewable and this figure has an aggregated annual growth rate of 16%. Wind has the highest annual growth rate of 22% while the least annual growth rate of 2% is for hydropower. The main push for renewable like wind in the OECD countries are environmental concerns and the business aspect in power generation. The situation is however completely different in Africa, where the thrust for RETs is developmental based. Although the continent has abundant renewable energy resources like solar, biomass, wind and hydro potential, they have remained largely unexploited. Several efforts have been made to help African countries like Zimbabwe to exploit such resources. The main objectives of this country study included review of Zimbabwe's development of past RETs, establish barriers related lessons learnt from such projects and currently running RETs projects, identify barriers experienced by other projects and then select a few barrier removal projects and then develop them with the help of all stake holders in the country. The methodology of this study involved a review of past RETs projects to establish barriers faced and barriers related lessons learnt. An examination of the policy instruments related to RETs was done to establish how they promote the dissemination of the technologies as well as their adequacy. A survey of all possible RETs projects in the country was carried out and in this survey the end-users were visited and interviewed by the research team. An initial workshop, which was attended by all stake holders, was held in November 1999. An Advisory committee on RETs in Zimbabwe was then set up comprising of various stake holders from government, the private sector, research institutions, interviewed end-users and the NGO community

  8. Technology management: case study of an integrated health system.

    Science.gov (United States)

    Dahl, D H; McFarlan, T K

    1994-12-01

    Technology management has assumed a role of vital importance in today's health care environment. Capital reserves and operating income have been stretched by pervasive and expensive technologies, while overall reimbursement has been reduced. It is imperative for hospitals to develop and consistently use technology management processes that begin prior to a technology's introduction in the hospital and continue throughout its life cycle. At Samaritan Health System (SHS), an integrated health care delivery system based in Phoenix, technology management provides tools to improve decision making and assist in the system's integration strategy as well as control expenses. SHS uses a systemwide technology-specific plan to guide acquisition and/or funding decisions. This plan describes how particular technologies can help achieve SHS' organizational goals such as promoting system integration and/or improving patient outcomes while providing good economic value. After technologies are targeted in this systemwide plan they are prioritized using a two-stage capital prioritization process. The first stage of the capital prioritization process considers the quantitative and qualitative factors critical for equitable capital distribution across the system. The second stage develops a sense of ownership among the parties that affect and are affected by the allocation at a facility level. This process promotes an efficient, effective, equitable, and defensible approach to resource allocation and technology decision making. Minimizing equipment maintenance expenditures is also an integral part of technology management at SHS. The keys to reducing maintenance expenditures are having a process in place that supports a routine fiscal evaluation of maintenance coverage options and ensuring that manufacturers are obligated to provide critical maintenance resources at the time of equipment purchase. Maintenance service options under consideration in this report include full

  9. Strategies for Integrating Emerging Technologies: Case Study of an Online Educational Technology Master's Program

    Science.gov (United States)

    Czerkawski, Betul C.

    2013-01-01

    Emerging technologies do not necessarily facilitate or advance learning processes; teaching strategies that are used in the learning process, integration and incorporation methods do. In online instruction, research shows that "effective distance education depends on the provision of pedagogical excellence" (Bernard et al., 2004, p.413).…

  10. Learning to make technology work - a study of learning in technology demonstration projects

    DEFF Research Database (Denmark)

    Sutherland Olsen, Dorothy; Andersen, Per Dannemand

    2014-01-01

    Building working demonstrations of new technologies within sustainable energy and transport has become an important activity in the move towards a more energy efficient society. The work involved in building these demonstrations is usually organised in a project with a variety of different partic...

  11. Summer Students in Virtual Reality: A Pilot Study on Educational Applications of Virtual Reality Technology.

    Science.gov (United States)

    Bricken, Meredith; Byrne, Chris M.

    The goal of this study was to take a first step in evaluating the potential of virtual reality (VR) as a learning environment. The context of the study was The Technology Academy, a technology-oriented summer day camp for students ages 5-18, where student activities center around hands-on exploration of new technology (e.g., robotics, MIDI digital…

  12. A Study on the Role of Web Technology in Enhancing Research Pursuance among University Academia

    Science.gov (United States)

    Hussain, Irshad; Durrani, Muhammad Ismail

    2012-01-01

    The purpose of this study was to evaluate the role of web technologies in promoting research pursuance among university teachers, examine the use of web technologies by university teachers in conducting research and identify the problems of university academia in using web technologies for research. The study was delimited to academia of social…

  13. Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

    Science.gov (United States)

    Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

    2018-01-05

    Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

  14. Risk Management in Information Technology Project: An Empirical Study

    Directory of Open Access Journals (Sweden)

    Kornelius Irfandhi

    2016-09-01

    Full Text Available The companies are facing some risks due to changes in a dynamic environment. If risks are not managed properly, it will have some negative impacts on the companies at the present and the future. One important function of the Information Technology (IT governance is risk management. Risk management in IT project aims to provide a safe environment for IT projects undertaken. Risk management becomes an important process for the success of IT projects. This article discussed the risk of IT project and whether there was a relationship between risk management and the success of the project. The method used was performing a literature review of several scientific articles which published between 2010 and 2014. The results of this study are the presence of risk management and risk manager influence the success of the project. Risk analysis and risk monitoring and control also have a relationship with the subjective performance of IT projects. If risk management is applied properly, the chance of the success of the projects undertaken can be increased. 

  15. Strategic Management in Business Information Technology: A Case Study

    Directory of Open Access Journals (Sweden)

    Marcos Weber

    2013-09-01

    Full Text Available The Information Technology (IT sector is regarded as strategic for national economy. In Brazil, this sector is formed mostly of micro and small businesses. This article aims at understanding how does the strategic management process occurs in a small IT company, according to the schools of strategy and the strategy-as-practice approach. The method applied was a single case study of a small IT company, located in Rio Grande do Sul. The analyzed data revealed that the company adopts an informal strategic management centered on its directors, which may be related to the entrepreneurial school of strategy. However, data also indicate the presence of features of other schools of strategy along the company trajectory. We analyzed the strategy as social practice at the strategic level and also at the tactical level of the organization, through the guidance of managers, their interactions with customers and suppliers, their decision-making processes, among other practices related to everyday life. The results of the article shed light on the process of strategic management in micro and small IT companies, generating insights that can be useful for managers of similar companies.

  16. Technology and the Social Studies--Where We Were; Where We Are, Where We Are Going...

    Science.gov (United States)

    Mead-Mezzetta, Shirley

    1986-01-01

    Reviews the goals of the California State Department of Education's Technology in Curriculum (TIC) projects. Provides several examples of technology use and identifies several pieces of software which are being successfully used in high school social studies classes. (JDH)

  17. Study of LANs access technologies in wind power system

    DEFF Research Database (Denmark)

    Wei, Mu; Chen, Zhe

    2010-01-01

    Due to the energy challenges in the world, new types of generation technologies, such as renewable energy based generators, attract great attention and are being quickly developed, which results in the dramatic developments and changes in modern power systems, the communication technologies play...... a increasingly important role in guaranteeing the power system’s stability, reliability, and security. In this paper the necessity of communication technologies employed in wind power system are introduced. According the International Standards Organization (ISO) reference 7-layered model, the communication...... power environment are explained and discussed. Furthermore the simulation of application of Ethernet in an offshore wind farm communication network by a software, OPNET, is elaborated. With the investigation of the communication technologies in this paper, the offshore wind farm SCADA system can...

  18. Technological capabilities, institutions and firm productivity: a multilevel study

    Czech Academy of Sciences Publication Activity Database

    Goedhuys, M.; Srholec, Martin

    2015-01-01

    Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 Institutional support: PRVOUK-P23 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

  19. Innovation in concentrating solar power technologies: A study drawing on patent data

    OpenAIRE

    Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

    2010-01-01

    Better understanding the innovative process of renewable energy technologies is important for tackling climate change. Though concentrating solar power is receiving growing interest, innovation studies so far have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and solar thermal technologies. This study relies on patent data to examine international innovative activity in concentrating solar power technologies. Our uniqu...

  20. Benchmark Problems of the Geothermal Technologies Office Code Comparison Study

    Energy Technology Data Exchange (ETDEWEB)

    White, Mark D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Podgorney, Robert [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kelkar, Sharad M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McClure, Mark W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Danko, George [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ghassemi, Ahmad [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fu, Pengcheng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bahrami, Davood [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barbier, Charlotte [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cheng, Qinglu [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chiu, Kit-Kwan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Detournay, Christine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elsworth, Derek [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fang, Yi [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Furtney, Jason K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gan, Quan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gao, Qian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guo, Bin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hao, Yue [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horne, Roland N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huang, Kai [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Im, Kyungjae [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Norbeck, Jack [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rutqvist, Jonny [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Safari, M. R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sesetty, Varahanaresh [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sonnenthal, Eric [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tao, Qingfeng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); White, Signe K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wong, Yang [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xia, Yidong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-12-02

    A diverse suite of numerical simulators is currently being applied to predict or understand the performance of enhanced geothermal systems (EGS). To build confidence and identify critical development needs for these analytical tools, the United States Department of Energy, Geothermal Technologies Office has sponsored a Code Comparison Study (GTO-CCS), with participants from universities, industry, and national laboratories. A principal objective for the study was to create a community forum for improvement and verification of numerical simulators for EGS modeling. Teams participating in the study were those representing U.S. national laboratories, universities, and industries, and each team brought unique numerical simulation capabilities to bear on the problems. Two classes of problems were developed during the study, benchmark problems and challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. Study participants submitted solutions to problems for which their simulation tools were deemed capable or nearly capable. Some participating codes were originally developed for EGS applications whereas some others were designed for different applications but can simulate processes similar to those in EGS. Solution submissions from both were encouraged. In some cases, participants made small incremental changes to their numerical simulation codes to address specific elements of the problem, and in other cases participants submitted solutions with existing simulation tools, acknowledging the limitations of the code. The challenge problems were based on the enhanced geothermal systems research conducted at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995. The problems

  1. US country studies program: Support for climate change studies, national plans, and technology assessments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This paper describes the objectives of the next phase of the U.S. Country Studies Program which was launched in support of the Framework Convention on Climate Change (FCCC). The next phases of this program aim to: assist countries in preparing Climate Change Action plans; support technology assessments and development of technology initiatives; enhance exchange of information and expertise in support of FCCC. The program offers support for these processes in the form of handbooks which have been published to aid in preparing action plans, and to provide information on methane, forestry, and energy technologies. In addition an array of training workshops have been and are scheduled to offer hands on instruction to participants, expert advice is available from trained personnel, and modeling tools are available to aid in development of action plans.

  2. Science, Technology and Social Change Course's Effects on Technological Literacy Levels of Social Studies Pre-Service Teachers

    Science.gov (United States)

    Yigit, E. Ozlem

    2013-01-01

    Social studies curricula are required in order to prepare to educate children who continue to learn after their formal training, and it is vital that teachers receive an education properly. In Social Studies Education Departments of Education Faculties Science, Technology and Social Change course is convenient to this aim and it contributes to…

  3. Fit by Bits: An Explorative Study of Sports Physiotherapists' Perception of Quantified Self Technologies.

    Science.gov (United States)

    Allouch, Somaya Ben; van Velsen, Lex

    2018-01-01

    Our aim was to determine sport physiotherapists' attitudes towards Quantified Self technology usage and adoption and to analyze factors that may influence this attitude. A survey was used to study a sample in the Netherlands. Assessment was made of attitudes of towards Quantified Self technology usage by clients of therapists, by therapists themselves and intention to adopt Quantified Self technology. Results show that the uptake of Quantified Self technology by sports physiotherapists is rather low but that the intention to adopt Quantified Self technology by sports physiotherapists is quite high. These results can provide a foundation to provide an infrastructure for sports physiotherapists to fulfill their wishes with regard to Quantified Self technology.

  4. Technology Integration in Science Education: A Study of How Teachers Use Modern Learning Technologies in Biology Classrooms

    Science.gov (United States)

    Gnanakkan, Dionysius Joseph

    This multiple case-study investigated how high school biology teachers used modern learning technologies (probes, interactive simulations and animations, animated videos) in their classrooms and why they used the learning technologies. Another objective of the study was to assess whether the use of learning technologies alleviated misconceptions in Biology documented by American Association for the Advancement of Science. The sample consisted of eight teachers: four rural public school teachers, two public selective enrollment school teachers, and two private school teachers. Each teacher was followed for two Units of instruction. Data collected included classroom observations, field notes, student assignments and tests, teacher interviews, and pre-and post-misconception assessments. Paired t-tests were done to analyze the pre-post test data at a significance level of 0.05 and the qualitative data was analyzed using the constant comparative method. Each case study was characterized and then a cross-case analyses was done to find common themes across the different cases. Teachers were found to use the learning technologies as a tool to supplement instruction to visualize abstract processes, collect data, and explore abstract concepts and processes. Teachers were found to situate learning, use scaffolding and questioning and make students work in collaborative groups. The genetics, photosynthesis, and evolution misconceptions were better alleviated than cellular respiration. Student work that was collected demonstrated a superficial understanding of the concepts under discussion even when they had misconceptions. The teachers used the learning technologies in their classrooms for a variety of reasons: visual illustrations, time-saving measure to collect data, best way to collect data, engaging and fun for students and the interactive nature of the visualization tools and models. The study's findings had many implications for research, professional development

  5. Future orbital transfer vehicle technology study. Volume 2: Technical report

    Science.gov (United States)

    Davis, E. E.

    1982-01-01

    Missions for future orbit transfer vehicles (1995-2010) are identified and the technology, operations and vehicle concepts that satisfy the transportation requirements are defined. Comparison of reusable space and ground based LO2/LH2 OTV's was made. Both vehicles used advanced space engines and aero assist capability. The SB OTV provided advantages in life cycle cost, performance and potential for improvement. Comparison of an all LO2/LH2 OTV fleet with a fleet of LO2/LH2 OTVs and electric OTV's was also made. The normal growth technology electric OTV used silicon cells with heavy shielding and argon ion thrusters. This provided a 23% advantage in total transportation cost. The impact of accelerated technology was considered in terms of improvements in performance and cost effectiveness. The accelerated technology electric vehicle used GaAs cells and annealing but did not result in the mixed fleet being any cheaper than an all LO2/LH2 OTV fleet. It is concluded that reusable LO2/LH2 OTV's can serve all general purpose cargo roles between LEO and GEO for the forseeable future. The most significant technology for the second generation vehicle would be space debris protection, on-orbit propellant storage and transfer and on-orbit maintenance capability.

  6. Study on Global GIS architecture and its key technologies

    Science.gov (United States)

    Cheng, Chengqi; Guan, Li; Lv, Xuefeng

    2010-11-01

    Global GIS (G2IS) is a system, which supports the huge data process and the global direct manipulation on global grid based on spheroid or ellipsoid surface. Based on global subdivision grid (GSG), Global GIS architecture is presented in this paper, taking advantage of computer cluster theory, the space-time integration technology and the virtual reality technology. Global GIS system architecture is composed of five layers, including data storage layer, data representation layer, network and cluster layer, data management layer and data application layer. Thereinto, it is designed that functions of four-level protocol framework and three-layer data management pattern of Global GIS based on organization, management and publication of spatial information in this architecture. Three kinds of core supportive technologies, which are computer cluster theory, the space-time integration technology and the virtual reality technology, and its application pattern in the Global GIS are introduced in detail. The primary ideas of Global GIS in this paper will be an important development tendency of GIS.

  7. Assisted reproductive technology has no association with autism spectrum disorders: The Taiwan Birth Cohort Study.

    Science.gov (United States)

    Lung, For-Wey; Chiang, Tung-Liang; Lin, Shio-Jean; Lee, Meng-Chih; Shu, Bih-Ching

    2018-04-01

    The use of assisted reproduction technology has increased over the last two decades. Autism spectrum disorders and assisted reproduction technology share many risk factors. However, previous studies on the association between autism spectrum disorders and assisted reproduction technology have shown inconsistent results. The purpose of this study was to investigate the association between assisted reproduction technology and autism spectrum disorder diagnosis in a national birth cohort database. Furthermore, the results from the assisted reproduction technology and autism spectrum disorder propensity score matching exact matched datasets were compared. For this study, the 6- and 66-month Taiwan Birth Cohort Study datasets were used (N = 20,095). In all, 744 families were propensity score matching exact matched and selected as the assisted reproduction technology sample (ratio of assisted reproduction technology to controls: 1:2) and 415 families as the autism spectrum disorder sample (ratio of autism spectrum disorder to controls: 1:4). Using a national birth cohort dataset, controlling for the confounding factors of assisted reproduction technology conception and autism spectrum disorder diagnosis, both assisted reproduction technology and autism spectrum disorder propensity score matching matched datasets showed the same results of no association between assisted reproduction technology and autism spectrum disorder. Further study on the detailed information regarding the processes and methods of assisted reproduction technology may provide us with more information on the association between assisted reproduction technology and autism spectrum disorder.

  8. Automated Mixed Traffic Vehicle (AMTV) technology and safety study

    Science.gov (United States)

    Johnston, A. R.; Peng, T. K. C.; Vivian, H. C.; Wang, P. K.

    1978-01-01

    Technology and safety related to the implementation of an Automated Mixed Traffic Vehicle (AMTV) system are discussed. System concepts and technology status were reviewed and areas where further development is needed are identified. Failure and hazard modes were also analyzed and methods for prevention were suggested. The results presented are intended as a guide for further efforts in AMTV system design and technology development for both near term and long term applications. The AMTV systems discussed include a low speed system, and a hybrid system consisting of low speed sections and high speed sections operating in a semi-guideway. The safety analysis identified hazards that may arise in a properly functioning AMTV system, as well as hardware failure modes. Safety related failure modes were emphasized. A risk assessment was performed in order to create a priority order and significant hazards and failure modes were summarized. Corrective measures were proposed for each hazard.

  9. Study on data acquisition system based on reconfigurable cache technology

    Science.gov (United States)

    Zhang, Qinchuan; Li, Min; Jiang, Jun

    2018-03-01

    Waveform capture rate is one of the key features of digital acquisition systems, which represents the waveform processing capability of the system in a unit time. The higher the waveform capture rate is, the larger the chance to capture elusive events is and the more reliable the test result is. First, this paper analyzes the impact of several factors on the waveform capture rate of the system, then the novel technology based on reconfigurable cache is further proposed to optimize system architecture, and the simulation results show that the signal-to-noise ratio of signal, capacity, and structure of cache have significant effects on the waveform capture rate. Finally, the technology is demonstrated by the engineering practice, and the results show that the waveform capture rate of the system is improved substantially without significant increase of system's cost, and the technology proposed has a broad application prospect.

  10. A Study of Scientometric Methods to Identify Emerging Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Abercrombie, Robert K [ORNL; Udoeyop, Akaninyene W [ORNL

    2011-01-01

    This work examines a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, worldwide patents, news archives, and on-line mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain we investigated.

  11. A bridge between conceptual frameworks sciences, society and technology studies

    CERN Document Server

    2015-01-01

    This book analyzes scientific problems within the history of physics, engineering, chemistry, astronomy and medicine, correlated with technological applications in the social context. When and how is tension between disciplines explicitly practised? What is the conceptual bridge between science researches and the organization of technological researches in the development of  industrial applications?  The authors explain various ways in which the sciences allowed advanced modelling on the one hand, and the development of new technological ideas on the other hand. An emphasis on the role played by mechanisms, production methods and instruments bestows a benefit on historical and scientific discourse: theories, institutions, universities, schools for engineers, social implications as well.  Scholars from different traditions discuss the emerging style of thinking in methodology and, in theoretical perspective, aim to gather and re-evaluate the current thinking on this subject. It brings together contribution...

  12. [Study on baking processing technology of hui medicine Aconitum flavum].

    Science.gov (United States)

    Fu, Xue-yan; Zhang, Bai-tong; Li, Ting-ting; Dong, Lin; Hao, Wen-jing; Yu, Liang

    2013-12-01

    To screen and optimize the processing technology of Aconitum flavum. The acute-toxicity, anti-inflammatory and analgesic experiments were used as indexes. Four processing methods, including decoction, streaming, baking and processing with Chebulae Fructus decoction, were compared to screen the optimum processing method for Aconitum flavum. The baking time was also optimized. The optimal baked technology was that 1-2 mm decoction pieces was baked at 105 degrees C for 3 hours. The baking method is proved to be the optimal processing method of Aconitum flavum. It is shown that this method is simple and stable.

  13. Development of a Technology Transfer Score for Evaluating Research Proposals: Case Study of Demand Response Technologies in the Pacific Northwest

    Science.gov (United States)

    Estep, Judith

    researcher and recipient relationship, specific to technology transfer. In this research, the evaluation criteria of several research organizations were assessed to understand the extent to which the success attributes that were identified in literature were considered when reviewing research proposals. While some of the organizations included a few of the success attributes, none of the organizations considered all of the attributes. In addition, none of the organizations quantified the value of the success attributes. The effectiveness of the model relies extensively on expert judgments to complete the model validation and quantification. Subject matter experts ranging from senior executives with extensive experience in technology transfer to principal research investigators from national labs, universities, utilities, and non-profit research organizations were used to ensure a comprehensive and cross-functional validation and quantification of the decision model. The quantified model was validated using a case study involving demand response (DR) technology proposals in the Pacific Northwest. The DR technologies were selected based on their potential to solve some of the region's most prevalent issues. In addition, several sensitivity scenarios were developed to test the model's response to extreme case scenarios, impact of perturbations in expert responses, and if it can be applied to other than demand response technologies. In other words, is the model technology agnostic? In addition, the flexibility of the model to be used as a tool for communicating which success attributes in a research proposal are deficient and need strengthening and how improvements would increase the overall technology transfer score were assessed. The low scoring success attributes in the case study proposals (e.g. project meetings, etc.) were clearly identified as the areas to be improved for increasing the technology transfer score. As a communication tool, the model could help a research

  14. Examining the Teaching of Science, and Technology and Engineering Content and Practices: An Instrument Modification Study

    Science.gov (United States)

    Love, Tyler S.; Wells, John G.; Parkes, Kelly A.

    2017-01-01

    A modified Reformed Teaching Observation Protocol (RTOP) (Piburn & Sawada, 2000) instrument was used to separately examine eight technology and engineering (T&E) educators' teaching of science, and T&E content and practices, as called for by the "Standards for Technological Literacy: Content for the Study of Technology"…

  15. Elementary Principals' Strategies for Managing the Educational Technology Refresh Process: A Case Study

    Science.gov (United States)

    Denton, Edward A.

    2011-01-01

    Increased uses of educational technology by students and teachers in recent years have compelled elementary principals to expand educational technology resources and replace educational technology resources at the end of it's service life. The purpose of this study was to investigate strategies and practices employed by elementary principals…

  16. Examination of Studies on Technology-Assisted Collaborative Learning Published between 2010-2014

    Science.gov (United States)

    Arnavut, Ahmet; Özdamli, Fezile

    2016-01-01

    This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education.…

  17. Assisted Reproductive Technology Has No Association with Autism Spectrum Disorders: The Taiwan Birth Cohort Study

    Science.gov (United States)

    Lung, For-Wey; Chiang, Tung-Liang; Lin, Shio-Jean; Lee, Meng-Chih; Shu, Bih-Ching

    2018-01-01

    The use of assisted reproduction technology has increased over the last two decades. Autism spectrum disorders and assisted reproduction technology share many risk factors. However, previous studies on the association between autism spectrum disorders and assisted reproduction technology have shown inconsistent results. The purpose of this study…

  18. Technological Studies at Thomas Edison Middle School. Grades 6-7-8.

    Science.gov (United States)

    Foster, Patrick N.

    This technology studies curriculum for grades 6-8 is a plan for each middle school student to experience technology education for approximately 60 days (1 trimester of a 180-day school year) in each grade. Section A provides definitions; structure or content for grade-level programs with science and technology unifiers (unifying curricular…

  19. A Phenomenological Study: Experiences of Chinese Students Using Educational Technology in American Universities

    Science.gov (United States)

    Jiang, Ying

    2017-01-01

    This phenomenological study explores the educational technology experiences of ten Chinese international students at American universities. It describes their technology experiences and the influence on their technology self-efficacy and acculturation to the university culture in America. Seidman's (1998) three-interview approach was employed to…

  20. Texas Manufacturing Technology Center feasibility study for the Inland Regional Industrial Technology Institute

    International Nuclear Information System (INIS)

    1994-01-01

    This document presents the Texas Manufacturing Technology Center (TMTC) Business Plan to convert the Central Facility of the Superconducting Super Collider project to alternate uses. The plan is divided into six sections: (1) Executive Summary, (2) Market and Benefit Analysis, (3) Marketing Strategy, (4) Services, (5) Organization and Operations Overview, and (6) Financial Plan. Each area is supported by separate documents that address individual opportunities and challenges associated with transitioning the facility, and its asset base to new uses for benefit of the locality, state, region and nation

  1. Extending GIS Technology to Study Karst Features of Southeastern Minnesota

    Science.gov (United States)

    Gao, Y.; Tipping, R. G.; Alexander, E. C.; Alexander, S. C.

    2001-12-01

    of Southeastern Minnesota. The Karst Feature Database of Winona County is being expanded to include all the mapped karst features of southeastern Minnesota. Air photos from 1930s to 1990s of Spring Valley Cavern Area in Fillmore County were scanned and geo-referenced into our GIS system. This technology has been proved to be very useful to identify sinkholes and study the rate of sinkhole development.

  2. Teaching through mobile technology : a reflection from high school studies in South Africa

    OpenAIRE

    Jantjies, Mmaki; Joy, Mike

    2017-01-01

    The use of mobile technology to support teaching and learning in schools, has extended technology learning tools in schools across different socio economic divides. There have been various studies throughout the world which reflect the improvement of such technology in schools. In this chapter we reflect on a series of studies conducted in developing countries with focus on Jantjies and Joy (2012,2013,2014,2015) studies. The studies were conducted in schools with the objective of providing te...

  3. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    Directory of Open Access Journals (Sweden)

    Roisin P. Corcoran

    2014-12-01

    Full Text Available This paper describes the use of technology to provide virtual professional development (VPD for teachers and to conduct classroom observations in a study of English Language Learner (ELL instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral language/literacy, reading, and science across 63 randomly assigned urban, suburban, and rural schools (first year of implementation. ELLA-V also examines the impact of bimonthly VPD for treatment teachers compared to comparison group teachers on pedagogical skills, measured by sound observation instruments, and on student achievement, measured by state/national English language/literacy/reading tests and a national science test. This study features extensive technology use via virtual observations, bimonthly VPD, and randomly assigned treatment and control schools with students served in English as second language (ESL instructional time. The study design and methodology are discussed relativeto the specialized uses of technology and issues involving the evaluation of technology’s contribution to the intervention of interest and of the efficient, cost-effective execution of the study.

  4. Future orbital transfer vehicle technology study. Volume 1: Executive summary

    Science.gov (United States)

    Davis, E. E.

    1982-01-01

    Reusable space and ground based LO2/LH2 OTV's, both advanced space engines and aero assist capability were compared. The SB OTV provided advantages in life cycle cost, performance and potential for improvement. An all LO2/LH2 OTV fleet was also compared with a fleet of LO2/.H2 OTV's and electric OTV's. The normal growth technology electric OTV used silicon cells with heavy shielding and argon ion thrusters. In this case, the LO2/LH2 OTV fleet provided a 23% advantage in total transportation cost. An accelerated technology LF2/LH2 OTV provided improvements in performance relative to LO2/.H2 OTV but has higher DDT&E cost which negated its cost effectiveness. The accelerated technology electric vehicle used GaAs cells and annealing but still did not result in the mixed fleet being any cheaper than an all LO2/LH2 OTV fleet. It is concluded that reusable LO2/LH2 OTV's can serve all general purpose cargo roles between LEO and GEO for the forseeable future. The most significant technology for the second generation vehicle would be space debris protection, on orbit propellant storage and transfer and on orbit maintenance capability.

  5. Science and technology awareness for preschool children: A case study

    CSIR Research Space (South Africa)

    Van Deventer, A

    2008-11-01

    Full Text Available not loose the opportunity to have a positive influence on the attitudes of people towards science and technology. The question that comes to mind is where and when to start? There is no clear answer to these questions, but what is obvious is that we cannot...

  6. Low cost construction technologies and materials - case study Mozambuique

    CSIR Research Space (South Africa)

    Kuchena, JC

    2009-09-01

    Full Text Available Low cost or affordable construction technologies and materials are often touted as a panacea in meeting the ever growing demand for rapid housing delivery in developing economies. Mozambique as with most of the developing world, from both historical...

  7. Feasibility Study of RFID Technology for Construction Load Tracking

    Science.gov (United States)

    2011-12-31

    RFID technology was proven to be successful in tracking dump trucks from loading plant to a paver location on a highway project. The average roundtrip time was 1 hour and 4 minutes. However, 3% of this data has truck delivery times in excess of 2 hou...

  8. A study of information and communication technology (ICT) skills of ...

    African Journals Online (AJOL)

    Information and communication technology has become an indispensable tool for effective information processing, storage and retrieval. Staff of academic institutions of all types are saddled with the responsibility of providing services to an elite clientele and require serious deployment of ICTs and enormous skills to ...

  9. Art and technology: A comparative study of policy legitimation

    NARCIS (Netherlands)

    N.M. Wijnberg (Nachoem)

    1994-01-01

    textabstractThe legitimation of technology policy is discussed from the point of view of the neoclassical and of the dynamic, Schumpeterian, approach. The results are presented, using the traditional categories of policy legitimation in welfare theory: public goods, externalities, and merit goods.

  10. Telemedia Technology. Telecommunications Study Commission, Working Paper No. 5.

    Science.gov (United States)

    Fairholm, Gilbert W.

    This report presents an overview of the distribution formats for instructional television. While broadcast means of distribution have ben the mainstay of instructional television in the past, there are at least three television technologies that are considered as appropriate delivery mechanisms: over the air transmission, including broadcasting,…

  11. The Center for Advanced Food Technology: Food Related Studies.

    Science.gov (United States)

    1992-11-16

    34Molecular Restructuring and Complexation During Extrusion of Cornmeal ," Food Extnusion Scie-nce and Technology pp. 437-448.j J, Kokini, C.-T. Ho, M. Karwe...L-F., and K-Y. Chan (1991) "Molecular Transformations of Starch and Protein During Twin-Screw Extrusion Processing of Cornmeal ," Food Extrusion

  12. Voice Assessment of Student Work: Recent Studies and Emerging Technologies

    Science.gov (United States)

    Eckhouse, Barry; Carroll, Rebecca

    2013-01-01

    Although relatively little attention has been given to the voice assessment of student work, at least when compared with more traditional forms of text-based review, the attention it has received strongly points to a promising form of review that has been hampered by the limits of an emerging technology. A fresh review of voice assessment in light…

  13. Future of health technology assessment studies in gene and cell ...

    African Journals Online (AJOL)

    However, as should be noted, health care decisions need to be based on Health Technology Assessments (HTA) that should be based on objective criteria as efficacy, effectiveness, quality, safety, psychological, social, ethical, organisational and professional implications as well as cost effectiveness and further macro ...

  14. Developing a scalable modeling architecture for studying survivability technologies

    Science.gov (United States)

    Mohammad, Syed; Bounker, Paul; Mason, James; Brister, Jason; Shady, Dan; Tucker, David

    2006-05-01

    To facilitate interoperability of models in a scalable environment, and provide a relevant virtual environment in which Survivability technologies can be evaluated, the US Army Research Development and Engineering Command (RDECOM) Modeling Architecture for Technology Research and Experimentation (MATREX) Science and Technology Objective (STO) program has initiated the Survivability Thread which will seek to address some of the many technical and programmatic challenges associated with the effort. In coordination with different Thread customers, such as the Survivability branches of various Army labs, a collaborative group has been formed to define the requirements for the simulation environment that would in turn provide them a value-added tool for assessing models and gauge system-level performance relevant to Future Combat Systems (FCS) and the Survivability requirements of other burgeoning programs. An initial set of customer requirements has been generated in coordination with the RDECOM Survivability IPT lead, through the Survivability Technology Area at RDECOM Tank-automotive Research Development and Engineering Center (TARDEC, Warren, MI). The results of this project are aimed at a culminating experiment and demonstration scheduled for September, 2006, which will include a multitude of components from within RDECOM and provide the framework for future experiments to support Survivability research. This paper details the components with which the MATREX Survivability Thread was created and executed, and provides insight into the capabilities currently demanded by the Survivability faculty within RDECOM.

  15. A Case Study of Three Satellite Technology Demonstration School Sites.

    Science.gov (United States)

    Law, Gordon

    The Satellite Technology Demonstration (STD) represented a cooperative and complex effort involving federal, regional, state and local interests and demonstrated the feasibility of media distribution by communication satellite of social services for rural audiences. As part of a comprehensive evaluation plan, the summative data base was augmented…

  16. Technological capabilities, institutions and firm productivity: a multilevel study

    Czech Academy of Sciences Publication Activity Database

    Goedhuys, M.; Srholec, Martin

    2015-01-01

    Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 R&D Projects: GA ČR(CZ) GAP402/10/2310 Institutional support: RVO:67985998 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

  17. Maritime Improvised Explosive Devices: A Threat Based Technology Study

    Science.gov (United States)

    2015-06-12

    id/3078682/ns/technology_and_science- science/t/dolphins-go-front-lines-iraq-war/#.VPsmDZU5DIV. Carnegie , Dale , and Rita Kiley. 1948. How to Stop...Besides, if I let those things get me, I wouldn’t last long. ( Carnegie and Kiley 1948, 6) ― Admiral Ernest J. King Admiral King’s focus on

  18. Technological Diversity: A Case Study into Language Learners' Mobile Technology Use Inside and Outside the Classroom

    Science.gov (United States)

    Brick, Billy; Cervi-Wilson, Tiziana

    2015-01-01

    The speed of technological advance in the mobile phone, netbook and tablet markets has meant that learners increasingly have access to digital devices capable of enhancing their learning experience. This case study reports on how language learners, taking Italian as an option on the Institution Wide Languages Programme (IWLP) at Coventry…

  19. Study on the petroleum recovery technology : Analysis of pipeline flow

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Se Joon; Kim, Hyun Tae; Kim, In Kee; Huh, Dae Gee [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    The petroleum exploration activities have been performed by our own technology in the concession Block VI-I in Korean continental shelf for more than 10 years. Gas and gas condensate were discovered from several exploratory wells drilled in this block. This year, the news of another hit in the well of Gorae-V was very encouraging. Different from the previous gas discoveries, the reservoir properties and the productivity of Gorea-V well were excellent and the reserve estimate was very optimistic for the gas field development in this region. Gas consumption was very rapidly increased during recent years because of the image of cleaner fuel compared with other fossil fuels and convenience of usage. Korea is the fifth country in the world in terms of total quantity of petroleum consumption. This is the reason why the secure supply of oil and gas in the future is vital to our industry. The development of gas or gas condensate reservoir is different from that of oil reservoir. Especially sales contract must be made before the initiation of gas field exploitation. The production facilities including pipeline system must be selected and designed for further consideration. In this study, we have selected the 'K' offshore gas field where the water depth is 155 m and the distance from the shore is 50 km. The main purpose of this production system analysis is to select the optimum size and capacity of production facilities including pipeline in order to find the most appropriate production schedule. Production system analysis using nodal analysis includes deliverability calculation of the reservoir, production system optimization, recoverable reserve estimation, and performance forecast of the reservoir with three different production rate scenarios. The reservoir pressure is 4525 psia and the temperature is 248 deg.F. The OGIP of this reservoir was calculated as 24.64 BCF/well and the reservoir is expected to produce for up to 10 years. The porosity is 6% and the

  20. Teorías sobre la clasificación taxonómica de las papas cultivadas (Solanum L. sect. Petota Dumort.. Una revisión

    Directory of Open Access Journals (Sweden)

    Rodríguez Luis Ernesto

    2009-12-01

    Full Text Available

    La presente revisión busca reunir diferentes propuestas utilizadas para clasificar las papas cultivadas y sus parientes silvestres (Solanum L. sect. Petota Dumort., ya que históricamente se han presentado diferencias entre los taxónomos que han estudiado su clasificación. A la fecha no hay consenso, debido a que el límite entre especies no está definido, y las interrelaciones entre estas son frecuentes. Es importante generar una propuesta definitiva, coherente y práctica, que genere un consenso en la taxonomía de la papa. Esto permitiría conocer el número real de especies, el límite entre ellas y sus interrelaciones y continuos cambios. A su vez, esta información deberá facilitar un mejor aprovechamiento del germoplasma por parte de los programas de mejoramiento genético.

  1. RANCANGAN INFORMATION TECHNOLOGY SERVICE MANAGEMENT MENGGUNAKAN INFORMATION TECHNOLOGY INFRASTRUCTURE LIBRARY (Studi Kasus: STMIK AMIKOM Purwokerto

    Directory of Open Access Journals (Sweden)

    Nurfaizah Nurfaizah

    2015-08-01

    Full Text Available STMIK AMIKOM Purwokerto merupakan salah satu perguruan tinggi swasta yang dalam proses pengelolaan dan  penyampaian informasi telah menerapan teknologi informasi. Proses pelayanan suatu perguruan tinggi dipandang sebagai suatu solusi yang nantinya dapat meningkatkan kemampuan perusahaan di dalam pelayanan. Hal ini menyebabkan pentingnya peningkatan peran teknologi informasi agar selaras dengan  investasi baik hardware dan software yang dikeluarkan, sehingga dibutuhkan perencanaan yang optimal.IT Service Management (ITSM digunakan sebagai upaya untuk meningkatkan efisiensi pelayanan teknologi informasi kepada pengguna yang terdapat dalam framework Information Technology Infrastructure Library.Diharapkan dengan penerapan ITSM pengelolaan layanan TI menjadi lebih baik serta mampu menyelesaikan beberapa permasalahan yang ada pada organisasiyang sedang berjalan dengan menggunakan COBIT 4.1. ITSM menghasilkan perancangan pada masing-masing prosesnya dari 2 domain pembangun ITSM yaitu domain service support dan service delivery. Kata Kunci: ITSM, ITIL V3, COBIT 4.1

  2. Can CDM bring technology transfer to China?-An empirical study of technology transfer in China's CDM projects

    International Nuclear Information System (INIS)

    Wang Bo

    2010-01-01

    China has undertaken the greatest number of projects and reported the largest emission reductions on the global clean development mechanism (CDM) market. As technology transfer (TT) was designed to play a key role for Annex II countries in achieving greenhouse gas emission reductions, this study examines various factors that have affected CDM and TT in China. The proportion of total income derived from the certified emissions reductions (CER) plays a key role in the project owners' decision to adopt foreign technology. Incompatibility of CDM procedures with Chinese domestic procedures, technology diffusion (TD) effects, Chinese government policy and the role of carbon traders and CDM project consultants all contribute to the different degrees and forms of TT. International carbon traders and CDM consultants could play a larger role in TT in China's CDM projects as investors and brokers in the future.

  3. Study on laser beam welding technology for nuclear power plants

    International Nuclear Information System (INIS)

    Chida, Itaru; Shiihara, Katsunori; Fukuda, Takeshi; Kono, Wataru; Obata, Minoru; Morishima, Yasuo

    2012-01-01

    Laser beam welding is one of the jointing processes by irradiating laser beam on the material surface locally and widely used at various industrial fields. Toshiba has developed various laser-based maintenance and repair technologies and already applied them to several existing nuclear power plants. Laser cladding is a technique to weld the corrosion resistant metal onto a substrate surface by feeding filler wire to improve the corrosion resistance. Temper-bead welding is the heat input process to provide the desired microstructure properties of welded low alloy steels without post weld heat treatment, by inducing proper heat cycle during laser welding. Both laser welding technologies would be performed underwater by blowing the shielding gas for creating the local dry area. In this report, some evaluation results of material characteristics by temper-bead welding to target at Reactor Coolant System nozzle of PWR are presented. (author)

  4. Socio-technological study for establishing comprehensive nuclear safety system

    International Nuclear Information System (INIS)

    Furuta, Kazuo; Kanno, Taro; Yagi, Ekou; Shuto, Yuki

    2003-01-01

    This paper presents an overview and preliminary results of a research project on social-technology for nuclear safety, which started in October 2001. In particular, emergency response preparedness against nuclear disaster and consensus development will be discussed. The architecture of an emergency response simulator will be given, which is for assessing design of disaster prevention systems. A conceptual model of evacuation behavior of a resident has been constructed from analysis of past disaster cases. As for consensus development, deliberation spaces of actual committee meetings were constructed by analyzing transcripts of the meetings based on an opinion schema. A model of consensus development process has been proposed from the traces of participants' opinions over the deliberation spaces. Such a socio-technological approach will be useful not only for nuclear safety but also for safety of non-nuclear domains and human activities of a high hazard potential; it is expected to contribute to establishing risk-aware society of the future. (author)

  5. Reliability analysis of GEM® Premier™ technology: a multicenter study

    Directory of Open Access Journals (Sweden)

    Francesco Faggiano

    2015-10-01

    Full Text Available This paper describes how specific blood gas analyzer characteristics can support the emerging clinical and organizational user’s needs while ensuring patient safety. A oneyear data set from two Italian hospitals was analyzed from 10 different blood gas analyzers. Performance measurements in terms of mean down time (MDT were calculated to show how technical characteristics declared by the manufacturer compare to the analyzer availability in real clinical settings. Results show a high level of reliability for the analyzed technology, associated with very low MDT of each sensor integrated in the cartridge. Moreover, results show a high level of efficiency in cartridge usage. Such results are consistent with the specification of the GEM® Premier™ maintenance- free technology and are particularly relevant in the point-of-care testing setting.

  6. Wearable technology to help with visual challenges - two case studies.

    Science.gov (United States)

    Kálmán, Viktor; Baczó, Csaba; Livadas, Makis; Csielka, Tamás

    2015-01-01

    Today as embedded computing technology and sensors become cheaper and smaller wearable technologies experience an unprecedented boom. This article presents two wearable systems that aim to help people with low vision and the blind in performing everyday tasks and doing sports. DIGIGLASSES is a project aimed at creating a pair of augmented reality digital glasses that present controlled light and contrast levels and marks selectable features on the field of vision to aid in everyday tasks. BLINDTRACK is guidance system that uses wireless localization and an innovative haptic feedback belt to guide blind runners along the running track. Both systems are briefly presented along with the most relevant technical details and user feedback where applicable. Both projects were funded by the EU FP7. Corresponding author V. Kalman: viktor.kalman@ateknea.com.

  7. WERC -- a case study of a successful technology transfer partnership

    International Nuclear Information System (INIS)

    Bhada, R.K.; Ghassemi, A.; Jacquez, R.; Kauffman, D.

    1994-01-01

    In 1990, the Department of Energy approved a cooperative agreement for a Waste-management Education and Research Consortium (WERC) program. This consortium includes as its members the New Mexico State University (NMSU), the University of New Mexico (UNM), the New Mexico Institute of Mining and Technology (NMIMT), the Navajo Community College, the Los Alamos National Laboratory, and the Sandia National Laboratories working with industrial affiliates. Several of the unique technologies developed via WERC are successfully demonstrated /via application at national laboratories and industrial sites. Some examples are: Remediation of soil contaminated with plutonium using a polymer capture process has been applied at a DOE waste site; Subsurface mapping of buried waste has been applied at a DOE integrated demonstration (ID) site; and A pipeline detection system has been applied to leak detection from storage tanks and pipelines in the oil industry. This paper will present how the WERC partnership has been successful because of its unique structure and method of operation

  8. Oxide nanomaterials: synthetic developments, mechanistic studies, and technological innovations.

    Science.gov (United States)

    Patzke, Greta R; Zhou, Ying; Kontic, Roman; Conrad, Franziska

    2011-01-24

    Oxide nanomaterials are indispensable for nanotechnological innovations, because they combine an infinite variety of structural motifs and properties with manifold morphological features. Given that new oxide materials are almost reported on a daily basis, considerable synthetic and technological work remains to be done to fully exploit this ever increasing family of compounds for innovative nano-applications. This calls for reliable and scalable preparative approaches to oxide nanomaterials and their development remains a challenge for many complex nanostructured oxides. Oxide nanomaterials with special physicochemical features and unusual morphologies are still difficult to access by classic synthetic pathways. The limitless options for creating nano-oxide building blocks open up new technological perspectives with the potential to revolutionize areas ranging from data processing to biocatalysis. Oxide nanotechnology of the 21st century thus needs a strong interplay of preparative creativity, analytical skills, and new ideas for synergistic implementations. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Single-cell technologies in molecular marine studies

    KAUST Repository

    Kodzius, Rimantas

    2015-01-24

    Middle Eastern countries are experiencing a renaissance, with heavy investment in both in infrastructure and science. King Abdullah University of Science and Technology (KAUST) is a new and modern university in Saudi Arabia. At the Computational Bioscience Research Center (CBRC) we are working on exploring the Red Sea and beyond, collaborating with Japanese and other research centers. We are using the environment to collect and analyze the microorganisms present. The platform being established at CBRC allows to process samples in a pipeline. The pipeline components consist of sample collection, processing and sequencing, following the in silico analysis, determining the gene functions, identifying the organisms. The genomes of microorganisms of interest are targeted modified by genome editing technology such as CRISPR and desired properties are selected by single cell instrumentation. The final output is to identify valuable microorganisms with production of bio-energy, nutrients, the food and fine chemicals.

  10. Study of Near Field Communication Technology in University Scenarios

    Science.gov (United States)

    Ruiz, Irene Luque; Miraz, Guillermo Matas; Gómez-Nieto, Miguel Ángel

    2009-08-01

    In this paper we present an introduction to the possibilities of NFC (Near Field Communication) technology in the University environment. NFC is the key for the development of interactive systems where "intelligent" objects interact with the user just only by touching the objects with a NFC device. We support that a University environment with active objects dispatching information and services to the users (students and teachers) can introduce an appropriate environment for the fulfillment of the new Educational European directives. Here, we briefly describe some of the possibilities of the NFC technology and we include an example of the use of NFC through a Smart Poster for a scenario where a Department directory is considered.

  11. Educational Technology Goes Mobile : Why? A Case Study of Finland

    OpenAIRE

    Pirhonen, Antti; Rousi, Rebekah

    2018-01-01

    Recent decades have revealed that the digital educational technology that is expected to revolutionise schooling for generations to come, is fraught with challenges. One major challenge is that educational systems vastly vary between cultures and countries. The differences start from the conceptualisation of education and school. It is, therefore, quite inaccurate to handle education as a universal concept. In this article the authors evade generalisation by discussing the use of ...

  12. Feasibility study of introducing smart technologies in Barcelona Airport

    OpenAIRE

    Garcia Guiu, Anna

    2016-01-01

    The objectives of the project are to define and evaluate the diferent alternatives for implementing new Smart concepts and technologies in Barcelona Airport. The structure of the project activities will follow an initial approach (not exhaustive) consisting of: Context and background, justification of the project, assessment of Barcelona Airport baseline, identification of needs, technolgy Stae-of the art, definition of potential solutions and implementation scenarios, evaluation of altern...

  13. Study on Construction Technology of Municipal Road and Bridge Concrete

    Science.gov (United States)

    Tang, Fuyong

    2018-03-01

    With the continuous development of social economy and the accelerating process of urbanization, municipal road and bridge projects have also shown a trend of rapid development. Municipal road and bridge work can fully reflect the economic and cultural development level of cities and is also an important symbol of urban development. As a basic material of construction, concrete is widely used in engineering construction. This article will analyze the municipal road and bridge concrete construction technology, put forward corresponding measures.

  14. FEASIBILITY STUDY OF PRESSURE PULSING PIPELINE UNPLUGGING TECHNOLOGIES FOR HANFORD

    Energy Technology Data Exchange (ETDEWEB)

    Servin, M. A. [Washington River Protection Solutions, LLC, Richland, WA (United States); Garfield, J. S. [AEM Consulting, LLC (United States); Golcar, G. R. [AEM Consulting, LLC (United States)

    2012-12-20

    The ability to unplug key waste transfer routes is generally essential for successful tank farms operations. All transfer lines run the risk of plugging but the cross site transfer line poses increased risk due to its longer length. The loss of a transfer route needed to support the waste feed delivery mission impacts the cost and schedule of the Hanford clean up mission. This report addresses the engineering feasibility for two pressure pulse technologies, which are similar in concept, for pipeline unplugging.

  15. Performance Measurement of Information Technology Governance: a Case Study

    OpenAIRE

    Andry, Johanes Fernandes

    2016-01-01

    Established in 2001, XYZ Cargo is a Freight Forwarder Service Company specialized in the logistic transportation located in Jakarta. XYZ Cargo has broad experiences in both ocean freight and air freight service and has more than sixty agents of partnership around the world. XYZ Cargo has implemented Information Technology (IT) that covers all key aspects of business processes of the enterprise. It has an impact on the strategic and competitive advantages of its success. Many organizations hav...

  16. Feasibility Study Of Pressure Pulsing Pipeline Unplugging Technologies For Hanford

    International Nuclear Information System (INIS)

    Servin, M. A.; Garfield, J. S.; Golcar, G. R.

    2012-01-01

    The ability to unplug key waste transfer routes is generally essential for successful tank farms operations. All transfer lines run the risk of plugging but the cross site transfer line poses increased risk due to its longer length. The loss of a transfer route needed to support the waste feed delivery mission impacts the cost and schedule of the Hanford clean up mission. This report addresses the engineering feasibility for two pressure pulse technologies, which are similar in concept, for pipeline unplugging

  17. Material Identification Technology (MIT) concept technical feasibility study

    International Nuclear Information System (INIS)

    Jones, J.L.; Harker, Y.D.; Yoon, W.Y.; Johnson, L.O.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) has initiated the design and development of a novel pulsed accelerator-based, active interrogation concept. The proposed concept, referred to as the Material Identification Technology (MIT), enables rapid (between accelerator pulses), non-destructive, elemental composition analysis of both nuclear and non-nuclear materials. Applications of this technique include material monitoring in support of counter-proliferation activities, such as export controls (at domestic and international inspection locations), SNM controls, nuclear weapon dismantlement, and chemical weapon verification. Material Identification Technology combines a pulsed, X-ray source (an electron accelerator) and a gamma detection system. The accelerator must maximize neutron production (pulse width, beam current, beam energy, and repetition rate) and minimize photon dose to the object. Current available accelerator technology can meet these requirements. The detection system must include detectors which provide adequate gamma energy resolution capability, rapid recovery after the initial X-ray interrogation pulse, and multiple single gamma event detection between accelerator pulses. Further research is required to develop the detection system. This report provides the initial feasibility assessment of the MIT concept

  18. A Study on Persuasive Technologies: The Relationship between User Emotions, Trust and Persuasion

    Directory of Open Access Journals (Sweden)

    Wan Nooraishya Wan Ahmad

    2018-06-01

    Full Text Available A successful persuasive technology is able to persuade people to change from one state to a more well known state. Therefore, to allow for a change, persuasive technology must be able to affect users’ emotion and make the user trust the technology so that they will adopt the persuasive technology into their daily life routine, as well as continue to use the technology for long period. This paper is aimed to study the relation between users’ emotion with trust and persuasion and how they may contribute to the success of changing a person attitude or behavior towards a certain context or issue. Twenty five participants have completed the study in 6 weeks by using two types of persuasive technology that were assessed at three different interaction stages: pre, during and post. Result shows that emotions have a significant effect on trust, whereas the effect of emotions on persuasion using the persuasive technology was mediated by trust.

  19. Initial Technology Assessment for the Large UV-Optical-Infrared (LUVOIR) Mission Concept Study

    Science.gov (United States)

    Bolcar, Matthew R.; Feinberg, Lee D.; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

    2016-01-01

    The NASA Astrophysics Divisions 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet-optical-infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for bio-signatures via direct-imaging and spectroscopic characterization of habitable exo-planets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV-Optical Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

  20. Initial Technology Assessment for the Large-Aperture UV-Optical-Infrared (LUVOIR) Mission Concept Study

    Science.gov (United States)

    Bolcar, Matthew R.; Feinberg, Lee; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

    2016-01-01

    The NASA Astrophysics Division's 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet/optical/infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for biosignatures via direct-imaging and spectroscopic characterization of habitable exoplanets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV/Optical/Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

  1. An Exploratory Study of the Implementation of Computer Technology in an American Islamic Private School

    Science.gov (United States)

    Saleem, Mohammed M.

    2009-01-01

    This exploratory study of the implementation of computer technology in an American Islamic private school leveraged the case study methodology and ethnographic methods informed by symbolic interactionism and the framework of the Muslim Diaspora. The study focused on describing the implementation of computer technology and identifying the…

  2. Distance Education in Information Technology, a case study

    DEFF Research Database (Denmark)

    Helbo, Jan; Knudsen, Morten

    2002-01-01

    Project organized problem based learning is a successful concept for on-campus education at Aalborg University. The "Aalborg concept" has been used in networked distance education as well. This paper describes a project from the first year of our Master of Information Technology education organized......, and the designed solution should be implemented on a test rig. In spite of this, the group fulfilled the goals satisfactorily, and made an impressive project. The main conclusions are, that the project work is a strong learning motivator, enhancing peer collaboration, for off-campus students as well. However...

  3. BICAPA case study of natural hazards that trigger technological disasters

    Science.gov (United States)

    Boca, Gabriela; Ozunu, Alexandru; Nicolae Vlad, Serban

    2010-05-01

    Industrial facilities are vulnerable to natural disasters. Natural disasters and technological accidents are not always singular or isolated events. The example in this paper show that they can occur in complex combinations and/or in rapid succession, known as NaTech disasters, thereby triggering multiple impacts. This analysis indicates that NaTech disasters have the potential to trigger hazmat releases and other types of technological accidents. Climate changes play an important role in prevalence and NATECH triggering mechanisms. Projections under the IPCC IS92 a scenario (similar to SRES A1B; IPCC, 1992) and two GCMs indicate that the risk of floods increases in central and eastern Europe. Increase in intense short-duration precipitation is likely to lead to increased risk of flash floods. (Lehner et al., 2006). It is emergent to develop tools for the assessment of risks due to NATECH events in the industrial processes, in a framework starting with the characterization of frequency and severity of natural disasters and continuing with complex analysis of industrial processes, to risk assessment and residual functionality analysis. The Ponds with dangerous technological residues are the most vulnerable targets of natural hazards. Technological accidents such as those in Baia Mare, (from January to March 2000) had an important international echo. Extreme weather phenomena, like those in the winter of 2000 in Baia Mare, and other natural disasters such as floods or earthquakes, can cause a similar disaster at Târnăveni in Transylvania Depression. During 1972 - 1978 three decanting ponds were built on the Chemical Platform Târnăveni, now SC BICAPA SA, for disposal of the hazardous-wastes resulting from the manufacture of sodium dichromate, inorganic salts, sludge from waste water purification and filtration, wet gas production from carbide. The ponds are located on the right bank of the river Târnava at about 35-50m from the flooding defense dam. The total

  4. Cogeneration technology alternatives study. Volume 2: Industrial process characteristics

    Science.gov (United States)

    1980-01-01

    Information and data for 26 industrial processes are presented. The following information is given for each process: (1) a description of the process including the annual energy consumption and product production and plant capacity; (2) the energy requirements of the process for each unit of production and the detailed data concerning electrical energy requirements and also hot water, steam, and direct fired thermal requirements; (3) anticipated trends affecting energy requirements with new process or production technologies; and (4) representative plant data including capacity and projected requirements through the year 2000.

  5. 2-22 Study of Oxidation/reduction Volatilization Technology

    Institute of Scientific and Technical Information of China (English)

    Tan; Cunmin[1; Cao; Shiwei[1; Tian; Yuan[1; Qin; Zhi[1

    2015-01-01

    As an advanced dry head-end processing of spent fuel reprocessing, the oxidation-reduction volatilization technology will use for pulverizing uranium oxide ceramic pellets, decladding, and removal of most of volatile and semi-volatile fission elements, 3H, 14C, Kr, Xe, I, Cs, Ru and Tc, from fuel prior to main treatment process. The AIROX and ORIOX process, including circulation of oxidation in oxygen atmosphere and reduction in hydrogen atmosphere, researched on international at present, is considered to be the first choice for head-end processing.

  6. Engaging ArcForm in Science and Technology Studies

    DEFF Research Database (Denmark)

    Allsopp, Benjamin Brink

    ArcForm is a non-linear form of general-purpose human language. It is designed as an alternative to paragraphs of text for intellectual collaboration (Allsopp 2013). It combines three areas of notational value. 1) It is similar to natural language (NL): both in its expressiveness and in the way...... not only the relations between the objects of various sciences and technologies, but simultaneously map the interrelations of these relations with social, political, and cultural objects. Furthermore in relation to the second way, the article describes how shared ArcForm maps may support dispersed STS...

  7. GIS-technologies as a mechanism to study geological structures

    Science.gov (United States)

    Sharapatov, Abish

    2014-05-01

    Specialized GIS-technologies allow creating multi-parameter models, completing multi-criteria optimisation tasks, and issues of geological profile forecasts using miscellaneous data. Pictorial and attributive geological and geophysical information collected to create GIS database is supplemented by the ERS (Earth's Remote Sensing) data, air spectrometry, space images, and topographic data. Among the important tasks are as follows: a unification of initial geological, geophysical and other types of information on a tectonic position, rock classification and stratigraphic scale; topographic bases (various projectures, scales); the levels of detail and exhaustibility; colors and symbols of legends; data structures and their correlation; units of measurement of physical quantities, and attribute systems of descriptions. Methods of the geological environment investigation using GIS-technology are based on a principle of the research target analogy with a standard. A similarity ratio is quantitative estimate. A geological forecast model is formed by structuring of geological information based on detailed analysis and aggregation of geological and formal knowledge bases on standard targets. Development of a bank of models of the analyzed geological structures of various range, ore-bearing features described by numerous prospecting indicators is the way to aggregate geological knowledge. The south terrain of the Valerianovskaya structure-facies zone (SFZ) of the Torgai paleo-rift structure covered with thick Mesozoic and Cenozoic rocks up to 2,000m is considered a so-called training ground for the development of GIS-technology. Parameters of known magnetite deposits located in the north of the SFZ (Sarybaiskoye, Sokolovskoye, etc.) are used to create the standard model. A meaning of the job implemented involves the following: - A goal-seeking nature of the research being performed and integration of the geological, geo-physical and other data (in many cases, efforts of the

  8. Overcoming technology - obsolescence: a case study in Heavy Water Plant

    International Nuclear Information System (INIS)

    Gupta, O.P.; Sonde, R.R.; Wechalekar, A.K.

    2002-01-01

    Ammonia based Heavy Water Plants in India are set up essentially in conjunction with fertiliser plants for the supply of feed synthesis gas. Earlier ammonia was being produced in fertiliser plants using high-pressure technology which was highly energy intensive. However with fast developments in the field of production of ammonia, fertiliser plants are switching over to low pressure technology. Ammonia based heavy water plants have to operate on pressures corresponding to that of fertiliser plants. Due to low pressures in production of ammonia, heavy water plants would also be required to operate at low pressures than the existing operating pressures. This problem was faced at Heavy Water Plant at Baroda where GSFC supplying synthesis gas switched over to low pressure technology making it imperative on the part of Heavy Water Board to carry out modification to the main plant for continued operation of Heavy Water Plant, Baroda. Anticipating similar problems due to production of ammonia at lower pressures in other fertiliser plants linked to existing Heavy Water Plants, it became necessary for HWB to develop water ammonia front end. The feed in such a case would be water instead of synthesis gas. This would enable HWB to dispense with dependence on fertiliser plants especially if grass-root ammonia based heavy water plants are to be set up. Incorporation of water ammonia front end would enable HWB to de link ammonia based heavy water plants with fertiliser plants. This paper discusses the advantage of de linking heavy water plant respective fertiliser plant by incorporating water ammonia front end and technical issues related to front end technology. A novel concept of ammonia absorption refrigeration (AAR) was considered for the process integration with the front end. The incorporation of AAR with water ammonia front-end configuration utilizes liquid ammonia refrigerant to generate refrigeration without additional energy input which otherwise would have been

  9. Key Health Information Technologies and Related Issues for Iran: A Qualitative Study.

    Science.gov (United States)

    Hemmat, Morteza; Ayatollahi, Haleh; Maleki, Mohammadreza; Saghafi, Fatemeh

    2018-01-01

    Planning for the future of Health Information Technology (HIT) requires applying a systematic approach when conducting foresight studies. The aim of this study was to identify key health information technologies and related issues for Iran until 2025. This was a qualitative study and the participants included experts and policy makers in the field of health information technology. In-depth semi-structured interviews were conducted and data were analyzed by using framework analysis and MAXQDA software. The findings revealed that the development of national health information network, electronic health records, patient health records, a cloud-based service center, interoperability standards, patient monitoring technologies, telehealth, mhealth, clinical decision support systems, health information technology and mhealth infrastructure were found to be the key technologies for the future. These technologies could influence the economic, organizational and individual levels. To achieve them, the economic and organizational obstacles need to be overcome. In this study, a number of key technologies and related issues were identified. This approach can help to focus on the most important technologies in the future and to priorities these technologies for better resource allocation and policy making.

  10. A Study Of The Internet Of Things And Rfid Technology: Big Data In Navy Medicine

    Science.gov (United States)

    2017-12-01

    technology on electrical power poses a threat to hospitals as well. In the event a power failure either from natural or nefarious purposes, the...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT A STUDY OF THE INTERNET OF THINGS AND RFID TECHNOLOGY ...December 2017 3. REPORT TYPE AND DATES COVERED MBA professional report 4. TITLE AND SUBTITLE A STUDY OF THE INTERNET OF THINGS AND RFID TECHNOLOGY : BIG

  11. Humans, Intelligent Technology, and Their Interface: A Study of Brown’s Point

    Science.gov (United States)

    2017-12-01

    INTELLIGENT TECHNOLOGY , AND THEIR INTERFACE: A STUDY OF BROWN’S POINT by Jackie L. J. White December 2017 Thesis Advisor: Carolyn Halladay...REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE HUMANS, INTELLIGENT TECHNOLOGY , AND THEIR INTERFACE: A STUDY OF BROWN’S POINT...with the technology before and during the accident. I combined the findings from the accident investigation with various heuristics regarding the human

  12. Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

    OpenAIRE

    Issham Ismail; Siti F Bokhare; Siti N Azizan; Nizuwan Azman

    2013-01-01

    The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach I...

  13. Baseline Study Methodology for Future Phases of Research on Nuclear Power Plant Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bower, Gordon Ross [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Rachael Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary Alexander [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-07-01

    In order to provide a basis for industry adoption of advanced technologies, the Control Room Upgrades Benefits Research Project will investigate the benefits of including advanced technologies as part of control room modernization This report describes the background, methodology, and research plan for the first in a series of full-scale studies to test the effects of advanced technology in NPP control rooms. This study will test the effect of Advanced Overview Displays in the partner Utility’s control room simulator

  14. Exploratory study on potential safeguards applications for shared ledger technology

    Energy Technology Data Exchange (ETDEWEB)

    Frazar, Sarah L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jarman, Kenneth D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Joslyn, Cliff A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kreyling, Sean J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sayre, Amanda M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schanfein, Mark J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); West, Curtis L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Winters, Samuel T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-02-07

    The International Atomic Energy Agency (IAEA) is responsible for providing credible assurance that countries are meeting their obligations not to divert or misuse nuclear materials and facilities for non-peaceful purposes. To this end, the IAEA integrates information about States’ nuclear material inventories and transactions with other types of data to draw its safeguards conclusions. As the amount and variety of data and information has increased, the IAEA’s data acquisition, management, and analysis processes have greatly benefited from advancements in computer science, data management, and cybersecurity during the last 20 years. Despite these advancements, inconsistent use of advanced computer technologies as well as political concerns among certain IAEA Member States centered on trust, transparency, and IAEA authorities limit the overall effectiveness and efficiency of IAEA safeguards. As a result, there is an ongoing need to strengthen the effectiveness and efficiency of IAEA safeguards while improving Member State cooperation and trust in the safeguards system. These chronic safeguards needs could be met with some emerging technologies, specifically those associated with the digital currency bitcoin.

  15. Study of load balancing technology for EAST data management

    Energy Technology Data Exchange (ETDEWEB)

    Li, Shi, E-mail: lishi@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui (China); Wang, Feng [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui (China); Xiao, Bingjia [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui (China); School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui (China); Yang, Fei [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui (China); Department of Computer Science, Anhui Medical University, Hefei, Anhui (China); Sun, Xiaoyang; Wang, Yong [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui (China)

    2014-05-15

    Highlights: • The load balancing concept is introduced into the MDSplus data service. • The new data service system based on the LVS framework and heartbeat technologies are described. • The scheduling algorithm “WLC” is used, and a software system is developed for optimizing the weight of node server. - Abstract: With the continuous renewal and increasing number of diagnostics, the EAST tokamak routinely generates ∼3 GB of raw data per pulse of the experiment, which is transferred to a centralized data management system. In order to strengthen international cooperation, all the acquired data has been converted and stored in the MDSplus servers. During the data system operation, there are some problems when a lot of client machines connect to a single MDSplus data server. Because the server process keeps the connection until the client closes its connection, a lot of server processes use a lot of network ports and consume a large amount of memory, so that the speed of access to data is very slow, but the CPU resource is not fully utilized. To improve data management system performance, many MDSplus servers will be installed on the blade server and form a server cluster to realize load balancing and high availability by using LVS and heartbeat technology. This paper will describe the details of the design and the test results.

  16. Smart homes, private homes? An empirical study of technology researchers? perceptions of ethical issues in developing smart-home health technologies

    OpenAIRE

    Birchley, Giles; Huxtable, Richard; Murtagh, Madeleine; ter Meulen, Ruud; Flach, Peter; Gooberman-Hill, Rachael

    2017-01-01

    Background Smart-home technologies, comprising environmental sensors, wearables and video are attracting interest in home healthcare delivery. Development of such technology is usually justified on the basis of the technology?s potential to increase the autonomy of people living with long-term conditions. Studies of the ethics of smart-homes raise concerns about privacy, consent, social isolation and equity of access. Few studies have investigated the ethical perspectives of smart-home engine...

  17. Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents

    OpenAIRE

    Misje, René

    2013-01-01

    Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents. This qualitative study explores the usefulness of music technology in music therapeutic practice with youth and adolescents. Four music therapist`s reflections on their use of music technologies and on the possibilities, potential and problems of this use are explored through semi-structured intervi...

  18. Existing knowledge in science and technology as subject of judicial establishment of facts

    Energy Technology Data Exchange (ETDEWEB)

    Czajika, D.

    1982-02-01

    The problems facing administrative courts in determining 'existing knowledge in science and technology' (No. 3 of paragraph 2 of sect. 7 of the Atomic Energy Law) cannot be solved by limiting the judicial establishment of facts. According to established law, in procedural or substantive law there is no foundation for doing so. Limits to this establishment of facts do result from the nature of the scientific process of understanding, which very often allows but the establishment of 'margins' pertaining to scientific opinions.

  19. Holding a candle to innovation in concentrating solar power technologies: A study drawing on patent data

    International Nuclear Information System (INIS)

    Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

    2011-01-01

    Improved understanding of the innovative pathways of renewable energy technologies is vital if we are to make the transition to a low carbon economy. This study presents new evidence on innovation and industry dynamics in concentrating solar power (CSP) technologies. Though CSP is undergoing a renaissance, existing innovation studies have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and CSP technologies. This study, based on patent data, examines the level and dynamics of innovative activity in CSP between 1978 and 2004. Our unique contribution, based on engineering expertise and detailed datawork, is a classification system mapping CSP technologies to the International Patent Classification (IPC) system. The innovation performance of CSP is found to be surprisingly weak compared to the patent boom in other green technologies. Performance was strong around 1980 before falling dramatically, and has only recently begun to show signs of recovery. Innovation and R and D are concentrated in high-tech countries; the US, Germany and Japan, which do not necessarily have high domestic CSP potential. Large CSP potential is, therefore, not a sufficient condition for innovation. Innovators must possess economic and scientific capabilities. - Research highlights: → We develop a new classification system which allows us to map innovation in CSP technologies to the International Patent Classification System. → Evidence of innovation patterns in concentrating solar power technologies is presented. → Innovation performance in CSP is surprisingly weak compared to patenting in other green technologies, despite its strong potential as a low carbon power generation technology.

  20. Technology study of Gunite tank sludge mobilization at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    DeVore, J.R.; Herrick, T.J.; Lott, K.E.

    1994-12-01

    The Oak Ridge National Laboratory (ORNL) Gunite Tank Sludge Mobilization Technology Study was initiated to support the Gunite Tank Treatability Study effort. The technology study surveyed the methods and technologies available for tank cleaning and sludge mobilization in a radioactive environment. Technologies were identified and considered for applicability to the Gunite and Associated Tanks (GAAT) problems. These were then either accepted for further study or rejected as not applicable. Technologies deemed applicable to the GAAT sludge removal project were grouped for evaluation according to (1) deployment method, (2) types of remotely operated end effector equipment applicable to removal of sludge, (3) methods for removing wastes from the tanks, and (4) methods for concrete removal. There were three major groups of deployment technologies: ``past practice`` technologies, mechanical arm-based technologies, and vehicle-based technologies. The different technologies were then combined into logical sequences of deployment platform, problem, end effector, conveyance, post-removal treatment required (if any), and disposition of the waste. Many waste removal options are available, but the best technology in one set of circumstances at one site might not be the best type to use at a different site. No single technology is capable of treating the entire spectrum of wastes that will be encountered in GAAT. None of the systems used in other industries appears to be suitable, primarily because of the nature of the sludges in the GAAT Operable Unit (OU), their radiation levels, and tank geometries. Other commercial technologies were investigated but rejected because the authors did not believe them to be applicable.

  1. Technology study of Gunite tank sludge mobilization at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    DeVore, J.R.; Herrick, T.J.; Lott, K.E.

    1994-12-01

    The Oak Ridge National Laboratory (ORNL) Gunite Tank Sludge Mobilization Technology Study was initiated to support the Gunite Tank Treatability Study effort. The technology study surveyed the methods and technologies available for tank cleaning and sludge mobilization in a radioactive environment. Technologies were identified and considered for applicability to the Gunite and Associated Tanks (GAAT) problems. These were then either accepted for further study or rejected as not applicable. Technologies deemed applicable to the GAAT sludge removal project were grouped for evaluation according to (1) deployment method, (2) types of remotely operated end effector equipment applicable to removal of sludge, (3) methods for removing wastes from the tanks, and (4) methods for concrete removal. There were three major groups of deployment technologies: ''past practice'' technologies, mechanical arm-based technologies, and vehicle-based technologies. The different technologies were then combined into logical sequences of deployment platform, problem, end effector, conveyance, post-removal treatment required (if any), and disposition of the waste. Many waste removal options are available, but the best technology in one set of circumstances at one site might not be the best type to use at a different site. No single technology is capable of treating the entire spectrum of wastes that will be encountered in GAAT. None of the systems used in other industries appears to be suitable, primarily because of the nature of the sludges in the GAAT Operable Unit (OU), their radiation levels, and tank geometries. Other commercial technologies were investigated but rejected because the authors did not believe them to be applicable

  2. Digital Libraries with Embedded Values: Combining Insights from LIS and Science and Technology Studies

    Science.gov (United States)

    Fleischmann, Kenneth R.

    2007-01-01

    In the digital age, libraries are increasingly being augmented or even replaced by information technology (IT), which is often accompanied by implicit assumptions of objectivity and neutrality, yet the field of science and technology studies (STS) has a long history of studying what values are embedded in IT and how they are embedded. This article…

  3. Organizational Influences in Technology Adoption Decisions: A Case Study of Digital Libraries

    Science.gov (United States)

    Oguz, Fatih

    2016-01-01

    The purpose of this study was to understand the organizational level decision factors in technology adoption in the context of digital libraries. A qualitative case study approach was used to investigate the adoption of a specific technology, XML-based Web services, in digital libraries. Rogers' diffusion of innovations and Wenger's communities of…

  4. What Teachers Want: A Differentiated Technology Integration Coaching Model Examined through a Self-Study Framework

    Science.gov (United States)

    Hatten, Stephanie Hinshaw

    2014-01-01

    The purpose of this a narrative self-study is to explore the actions taken by a Technology Instructional Specialist to determine which actions are most beneficial for teachers integrating technology in the elementary classroom. The study uses interviews, observations, and journaling of events occurring with six teachers at three different…

  5. An Exploratory Study on K-12 Teachers' Use of Technology and Multimedia in the Classroom

    Science.gov (United States)

    Martin, Florence; Carr, Marsha L.

    2015-01-01

    21st century has seen new technology and multimedia made available for integration in K-12 classrooms. This exploratory study examines K-12 teachers' use of technology and multimedia in the classroom in two southern counties in the Southeastern United States. The purpose of the study was to answer the following five research questions: 1) What…

  6. Teaching via Mobile Phone: A Case Study on Malaysian Teachers' Technology Acceptance and Readiness

    Science.gov (United States)

    Ismail, Issham; Bokhare, Siti F.; Azizan, Siti N.; Azman, Nizuwan

    2013-01-01

    The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers' acceptance of technology could influence their readiness for the pedagogical use…

  7. Influence of Transformational Leadership Style on Decision-Making Style and Technology Readiness: A Correlation Study

    Science.gov (United States)

    Mueller, Crystal A.

    2009-01-01

    The research addressed the problem of technology initiatives failing to meet organizational objectives. The purpose of the quantitative correlation study was to determine the relationship between transformational leadership styles, decision-making styles, and technology readiness. The findings of the study answered research questions in three…

  8. In the Shadow of Schumpeter: W. Rupert Maclaurin and the Study of Technological Innovation

    Science.gov (United States)

    Godin, Benoit

    2008-01-01

    J. Schumpeter is a key figure, even a seminal one, on technological innovation. Most economists who study technological innovation refer to Schumpeter and his pioneering role in introducing innovation into economic studies. However, despite having brought forth the concept of innovation in economic theory, Schumpeter provided few if any analyses…

  9. A Delphi Study on Technology Enhanced Learning (TEL) Applied on Computer Science (CS) Skills

    Science.gov (United States)

    Porta, Marcela; Mas-Machuca, Marta; Martinez-Costa, Carme; Maillet, Katherine

    2012-01-01

    Technology Enhanced Learning (TEL) is a new pedagogical domain aiming to study the usage of information and communication technologies to support teaching and learning. The following study investigated how this domain is used to increase technical skills in Computer Science (CS). A Delphi method was applied, using three-rounds of online survey…

  10. Technology Overview Using Case Studies of Alternative Landfill Technologies and Associated Regulatory Topics

    National Research Council Canada - National Science Library

    2003-01-01

    ... alternative landfill cover projects. The purpose of the case studies is to present examples of the flexibility used in the regulatory framework for approving alternative landfill cover designs, current research information about the use...

  11. A study on future nuclear reactor technology and development strategy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. Y.; Kim, S. H.; Sohn, D. S.; Suk, S. D.; Zee, S. K.; Yang, M. H.; Kim, H. J.; Park, W. S

    2000-12-01

    Development of nuclear reactor and fuel cycle technology for future is essential to meet the current issues such as enhancement of nuclear power reactor safety, economically competitive with gas turbine power generation, less production of radioactive waste, proliferation resistant fuel cycle, and public acceptance in consideration of lack of energy resources in the nuclear countries worldwide as well as in Korea. This report deals with as follows, 1) Review the world energy demand and supply perspective and analyse nature of energy and sustainable development to set-up nuclear policy in Korea 2) Recaptitulate the current long term nuclear R and D activities 3) Review nuclear R and D activities and programs of USA, Japan, France, Russia, international organizations such as IAEA, OECD/NEA 4) Recommend development directions of nuclear reactors and fuels.

  12. A study on future nuclear reactor technology and development strategy

    International Nuclear Information System (INIS)

    Kim, S. Y.; Kim, S. H.; Sohn, D. S.; Suk, S. D.; Zee, S. K.; Yang, M. H.; Kim, H. J.; Park, W. S.

    2000-12-01

    Development of nuclear reactor and fuel cycle technology for future is essential to meet the current issues such as enhancement of nuclear power reactor safety, economically competitive with gas turbine power generation, less production of radioactive waste, proliferation resistant fuel cycle, and public acceptance in consideration of lack of energy resources in the nuclear countries worldwide as well as in Korea. This report deals with as follows, 1) Review the world energy demand and supply perspective and analyse nature of energy and sustainable development to set-up nuclear policy in Korea 2) Recaptitulate the current long term nuclear R and D activities 3) Review nuclear R and D activities and programs of USA, Japan, France, Russia, international organizations such as IAEA, OECD/NEA 4) Recommend development directions of nuclear reactors and fuels

  13. Fundamental study on metal plating removal using pulsed power technology

    International Nuclear Information System (INIS)

    Imasaka, Kiminobu; Gnapowski, Sebastian; Akiyama, Hidenori

    2013-01-01

    A novel method for the metal removal from metal-plated substrate using pulsed power technology is proposed. A metal-plated substrate with three metal-layers structure (Cu, Ni and Au) is used as the sample substrate. Repetitive pulsed arc discharge plasma is generated between a rod electrode and the surface of substrate. Effect of the type of electrode system on metal plating removal was investigated. The removal region is produced by the moving phenomena of the pulsed arc discharge. A part of Au layer, which is the tompost metal surface of the substrate is vaporized and removed by the repetitive pulsed arc discharges. The proposed method can be used for recycle of metal-plated substrate. (author)

  14. Basic research for nuclear energy. y Study on the nuclear materials technology

    Energy Technology Data Exchange (ETDEWEB)

    Kuk, I H; Lee, H S; Jeong, Y H; Sung, K W; Han, J H; Lee, J T; Lee, H K; Kim, S J; Kang, H S; An, D H; Kim, K R; Park, S D; Han, C H; Jung, M K; Oh, Y J; Kim, K H; Kim, S H; Back, J H; Kim, C H; Lim, K S; Kim, Y Y; Na, J W; Ku, J H; Lee, D H

    1996-12-01

    A study on the nuclear materials technologies which are necessary to establish the base for alloy development was performed. - The feasibility study on the application of Zircaloy scrap waste for hydrogen storage - The development of metal hydride battery for energy storage system - The establishment of transmission electron microscopy database for nuclear materials - The basic technology for the development of cladding materials for high burnup - The water chemistry technology for secondary system pH control and the photocatalysis technology for decomposition and removal of organics. - Improvement of primary component integrity of PWR by Zinc injection. (author). 175 refs., 58 tabs., 262 figs.

  15. A study on the assessment of treatment technologies for efficient remediation of radioactively-contaminated soil

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jong Soon; Shin, Seung Su; KIm, Sun Il [Chosun University, Gwangju (Korea, Republic of)

    2016-09-15

    Soil can be contaminated by radioactive materials due to nuclide leakage following unexpected situations during the decommissioning of a nuclear power plant. Soil decontamination is necessary if contaminated land is to be reused for housing or industry. The present study classifies various soil remediation technologies into biological, physics/chemical and thermal treatment and analyzes their principles and treatment materials. Among these methods, this study selects technologies and categorizes the economics, applicability and technical characteristics of each technology into three levels of high, medium and low by weighting the various factors. Based on this analysis, the most applicable soil decontamination technology was identified.

  16. Basic research for nuclear energy. y Study on the nuclear materials technology

    International Nuclear Information System (INIS)

    Kuk, I. H.; Lee, H. S.; Jeong, Y. H.; Sung, K. W.; Han, J. H.; Lee, J. T.; Lee, H. K.; Kim, S. J.; Kang, H. S.; An, D. H.; Kim, K. R.; Park, S. D.; Han, C. H.; Jung, M. K.; Oh, Y. J.; Kim, K. H.; Kim, S. H.; Back, J. H.; Kim, C. H.; Lim, K. S.; Kim, Y. Y.; Na, J. W.; Ku, J. H.; Lee, D. H.

    1996-12-01

    A study on the nuclear materials technologies which are necessary to establish the base for alloy development was performed. - The feasibility study on the application of Zircaloy scrap waste for hydrogen storage - The development of metal hydride battery for energy storage system - The establishment of transmission electron microscopy database for nuclear materials - The basic technology for the development of cladding materials for high burnup - The water chemistry technology for secondary system pH control and the photocatalysis technology for decomposition and removal of organics. - Improvement of primary component integrity of PWR by Zinc injection. (author). 175 refs., 58 tabs., 262 figs

  17. International technology-determined competitiveness and research and technology policy. A comparative study. Internationale technologiebestimmte Wettbewerbsfaehigkeit und Forschungs- und Technologiepolitik. Eine komparative Studie

    Energy Technology Data Exchange (ETDEWEB)

    Busch, R

    1987-01-01

    The study answers the following questions: What is international technological competition. How are the framework requirements, regarding innovation of chosen countries in Europe, Japan and the USA made available. To what extent and with which instruments are the countries under investigation prepared to engage in technological competition. Point of departure was the supposition that the international competitiveness of a country depends increasingly on the innovation capacity of its industries. Technological innovations then become a specific means of competition. It was ascertained that the technical complexity of the systems and products, the cost accumulation and the availability of qualified personnel are amongst the greatest problems of the industry of a country and, at the same time, offer starting points for a state-run research and technology policies. (orig./HSCH).

  18. Scoping Study of Airlift Circulation Technologies for Supplemental Mixing in Pulse Jet Mixed Vessels

    Energy Technology Data Exchange (ETDEWEB)

    Schonewill, Philip P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Berglin, Eric J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Boeringa, Gregory K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Buchmiller, William C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burns, Carolyn A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Minette, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-04-07

    At the request of the U.S. Department of Energy Office of River Protection, Pacific Northwest National Laboratory (PNNL) conducted a scoping study to investigate supplemental technologies for supplying vertical fluid motion and enhanced mixing in Waste Treatment and Immobilization Plant (WTP) vessels designed for high solids processing. The study assumed that the pulse jet mixers adequately mix and shear the bottom portion of a vessel. Given that, the primary function of a supplemental technology should be to provide mixing and shearing in the upper region of a vessel. The objective of the study was to recommend a mixing technology and configuration that could be implemented in the 8-ft test vessel located at Mid-Columbia Engineering (MCE). Several mixing technologies, primarily airlift circulator (ALC) systems, were evaluated in the study. This technical report contains a review of ALC technologies, a description of the PNNL testing and accompanying results, and recommended features of an ALC system for further study.

  19. Examination of studies on technology-assisted collaborative learning published between 2010-2014

    Directory of Open Access Journals (Sweden)

    Ahmet Arnavut

    2016-09-01

    Full Text Available Abstract This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education. Therefore, in this study it was aimed to examine how integration of collaborative learning into technology would contribute to education or it would contribute to education or not. According to the results of the studies obtained from Science Direct database, there are many research related with technology-assisted collaborative learning. However, since all of the studies did not fulfill our search criteria for content analysis, a total number of 58 articles published between the years of 2010 and 2014 were used in this study.

  20. Providing Appropriate Technology for Emerging Markets: Case Study on China’s Solar Thermal Industry

    Directory of Open Access Journals (Sweden)

    Jianghua Zhou

    2017-01-01

    Full Text Available Building on a case study of five Chinese solar thermal companies and one association, our study aims to understand how the innovator’s choices regarding the use of technology and organizational practices for new product development enable companies to design and diffuse appropriate technology in emerging markets. The study uncovers two critical factors that enhance the appropriateness of technology: redefining the identity of technology and building a local supply system. Our analysis shows that synergic innovation in both architecture and component leads to the appropriate functionalities desired by emerging markets. Moreover, modular design and the building of a local supply system enhance the process appropriateness of technology. Our study provides an empirical basis for advocating going beyond minor adaptations of existing products to creating appropriate technology for emerging markets, and extends our understandings of the upstream process of designing appropriate technology. Moreover, the emphasis on the local supply system reflects a holistic framework for shaping and delivering appropriate technology, expanding the existing research focus on the perspective of the technology itself. Our research also has managerial implications that may help firms tap into emerging markets.

  1. Expanding the classroom with educational technology: A case study of a Cuban polytechnic high school

    Directory of Open Access Journals (Sweden)

    Anne Leftwich

    2014-12-01

    Full Text Available Polytechnic instruction has a common place in the Cuban education system (Gasperini, 2000. In polytechnic institutions, teachers leverage technological tools to prepare students for labor market competences. This case study examined a polytechnic institution in Cuba to consider how teachers defined educational technology. Based on teacher questionnaire responses, site-based teacher interviews, and field observations, technology was primarily viewed as a method for student preparation. In other words, teachers used technology to prepare students for their future careers and the technology they will need to be successful in that career. The study found that teachers highly valued their technical pedagogical training, believed that the growing spaces were an integral part of their technology based instruction, and claimed that the limited resources was their greatest barrier to integrating ICT in the classroom.

  2. A Study on Strategy Establishment for Foreign Market Penetrating of Nuclear Technology Venture Business

    Energy Technology Data Exchange (ETDEWEB)

    Song, Ki Dong; Kim, S. S.; Choi, Y. D.; Park, C. S.; Bae, C. I.; Chung, J. M.; Roe, S. P

    2007-05-15

    The objective of this study is to suggest feasible strategy for foreign market penetration of nuclear venture technology business. Especially, this study focuses on the technology and product export to the Frankfurt-Hoechst Industrial Park in Germany. This study analyzed the operating system of German Industrial Park, especially the Frankfurt-Hoechst Industrial Park. This study also analyzed the current status of Industrial Science Parks in Northern European countries such as Finland, Sweden, and England. Then, this study suggested the strategy for nuclear technology venture business to penetrate German export market effectively.

  3. A Study on Strategy Establishment for Foreign Market Penetrating of Nuclear Technology Venture Business

    International Nuclear Information System (INIS)

    Song, Ki Dong; Kim, S. S.; Choi, Y. D.; Park, C. S.; Bae, C. I.; Chung, J. M.; Roe, S. P.

    2007-05-01

    The objective of this study is to suggest feasible strategy for foreign market penetration of nuclear venture technology business. Especially, this study focuses on the technology and product export to the Frankfurt-Hoechst Industrial Park in Germany. This study analyzed the operating system of German Industrial Park, especially the Frankfurt-Hoechst Industrial Park. This study also analyzed the current status of Industrial Science Parks in Northern European countries such as Finland, Sweden, and England. Then, this study suggested the strategy for nuclear technology venture business to penetrate German export market effectively

  4. A Cultural Study of a Science Classroom and Graphing Calculator-based Technology

    OpenAIRE

    Casey, Dennis Alan

    2001-01-01

    Social, political, and technological events of the past two decades have had considerable bearing on science education. While sociological studies of scientists at work have seriously questioned traditional histories of science, national and state educational systemic reform initiatives have been enacted, stressing standards and accountability. Recently, powerful instructional technologies have become part of the landscape of the classroom. One example, graphing calculator-based technology...

  5. The Study on the Measurement and Testing Technology of the HMCVT Hydraulic Pressure Based on the Data Fusion Technology

    International Nuclear Information System (INIS)

    Cheng, G W; Zhou, Z L; Men, Q Y; Deng, C N

    2006-01-01

    The pressure of the hydro-mechanical continuously variable transmission (HMCVT) is not only one of the major factors affecting the performance of the power train but also the major control parameter of the HMCVT control system. So how to improve the high accuracy hydraulic pressure parameter for the HMCVT control system will be one of the key technologies in system development. Based on the HMCVT test system for a certain tracked vehicle, the hydraulic pressure is studied, and multi-sensor data fusion technology based on Taylor polynomial regression equation is put forward, which turn out to improve the performance of the pressure sensor. Utilizing the above-mentioned method, the ability of antijamming of the hydraulic screen pressure system of the HMCVT is effectively improved, and the validity of the test data in the test system is improved too

  6. Interim report deliverable 3.2 : focus group management process of the restricted use technology study

    Science.gov (United States)

    2005-09-30

    The Altarum Institute, under contract to the Michigan Department of Transportation (MDOT), currently is engaged in a project called the Altarum Restricted Use Technology Study. This study, an 18-month effort, seeks to apply restricted use techn...

  7. International survey on attitudes toward ethics in health technology assessment: An exploratory study

    NARCIS (Netherlands)

    Arellano, L.E.; Willett, J.M.; Borry, P.

    2011-01-01

    Objectives: The objective of this exploratory study was to survey international health technology assessment (HTA) professionals to determine attitudes toward ethics in HTA. Methods: An exploratory, quantitative, cross-sectional study design was developed. The sample population (n = 636) was

  8. R and D for the Feasibility Study of CLIC Technology

    CERN Document Server

    Braun, H; Geschonke, Günther; Guignard, Gilbert; Hübner, K; Wilson, Ian H

    2004-01-01

    An overview is given of the necessary R&D and particularly of the CLIC test facility CTF3 which is presently under construction for demonstrating the key issues related to the CLIC technology and to the two-beam scheme. The results concerning the commissioning of the injector and of the first part of the linac already built are summarized. The main R&D topics to be covered with this test infrastructure are described and the planned road-map in order to reach the pre-defined goals is indicated. The potential of CTF3 for checking the bunch-train recombination, testing RF accelerating structures, investigating the use of a drive-beam for RF power production, for bench-marking simulation codes and possibly making low-energy experiments related to linear collider R&D is presented. The activities required for the feasibility programme planned are given in the form of work packages, together with the needed but not available resources and the time schedule.

  9. Integrated technology rotor/flight research rotor concept definition study

    Science.gov (United States)

    Carlson, R. G.; Beno, E. A.; Ulisnik, H. D.

    1983-01-01

    As part of the Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) Program a number of advanced rotor system designs were conceived and investigated. From these, several were chosen that best meet the started ITR goals with emphasis on stability, reduced weight and hub drag, simplicity, low head moment stiffness, and adequate strength and fatigue life. It was concluded that obtaining low hub moment stiffness was difficult when only the blade flexibility of bearingless rotor blades is considered, unacceptably low fatigue life being the primary problem. Achieving a moderate hub moment stiffness somewhat higher than state of the art articulated rotors in production today is possible within the fatigue life constraint. Alternatively, low stiffness is possible when additional rotor elements, besides the blades themselves, provide part of the rotor flexibility. Two primary designs evolved as best meeting the general ITR requirements that presently exist. An I shaped flexbeam with an external torque tube can satisfy the general goals but would have either higher stiffness or reduced fatigue life. The elastic gimbal rotor can achieve a better combination of low stiffness and high fatigue life but would be a somewhat heavier design and possibly exhibit a higher risk of aeromechanical instability.

  10. Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes

    Science.gov (United States)

    Palmer, W. B.; Gerlaugh, H. E.; Priestley, R. R.

    1980-01-01

    Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given.

  11. A study on fabrication technology of ceramic overpack

    International Nuclear Information System (INIS)

    Teshima, T.; Ishikawa, H.; Sasaki, N.; Karita, Y.; Katsumoto, K.

    1990-03-01

    The conceptual design and fabrication test of a full-scale ceramic overpack were performed from the viewpoint of structural barriers as a part of program to evaluate their potential use as overpack under conditions of deep geological disposal. Materials investigated were porcelain (used for insulators) and Al 2 O 3 with high purity of 99.7 %. The selected design consisted of a cylindrical body with hemispherical heads at each end. The design thickness of overpack is the sum of the structural thickness and corrosion allowance. The thickness required to resist the lithostatic pressure was estimated by the basic cylinder buckling formulas and finite element stress analyses in both case of uniform and non-uniform external pressure conditions. These analyses showed that structural thickness of 119 mm was necessary for overpack of porcelain and 40 mm for Al 2 O 3 under the predicted maximum uniform pressure. In addition, fracture probability of delayed failure, one of significant degradation mode, was estimated for overpack of porcelain. A full-scale overpack of porcelain, of dimensions 800 mm outer diameter x 2200 mm length x 150 mm wall thickness, was fabricated under the ordinary level of fabrication technology. (author)

  12. The current status of usability studies of information technologies in China: a systematic study.

    Science.gov (United States)

    Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

    2014-01-01

    To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Six hundred forty-seven publications were selected for analysis. We found that in China the literature on usability in the field of information technology began in 1994 and increased thereafter. The usability definitions from ISO 9241-11:1998 and Nielsen (1993) have been widely recognized and cited. Authors who have published several publications are rare. Fourteen journals have a publishing rate over 1%. Only nine publications about HIT were identified. China's usability research started relatively late. There is a lack of organized research teams and dedicated usability journals. High-impact theoretical studies are scarce. On the application side, no original and systematic research frameworks have been developed. The understanding and definition of usability is not well synchronized with international norms. Besides, usability research in HIT is rare. More human and material resources need to be invested in China's usability research, particularly in HIT.

  13. Application of radiotracer technology to the study of coastal processes

    International Nuclear Information System (INIS)

    Airey, P.; Szymczak, R.; Zaw, M.; Tu, J.; Kluss, T.; Barry, J.

    1999-01-01

    Recent progress at ANSTO in the applications of radiotracer techniques to the study of coastal processes is reviewed. Tracers are used in detailed studies of specific components of complex environmental systems and are applied to the evaluation and extension of numerical models. Examples include studies of the aggregation of sewage particles following release from ocean outfalls. The use of tracers to study the impact of storm events on bedload transport at depth has also been demonstrated

  14. Dimension of Liberal Education in the Studies at a Technological University

    Directory of Open Access Journals (Sweden)

    Jolita Horbačauskienė

    2012-06-01

    Full Text Available The paper discusses the dimension of liberal education in the studies at a technological university emphasizing two aspects: socializing of studies of technical sciences and education of a professional – generalist. Liberal education in the studies at a technological university is regarded as a possibility to educate a professional with such abilities as communication skills, critical thinking, understanding of social context, professional ethics, scientific interest in professional development and motivation for further education. On the basis of the analysis of scientific literature, the paper presents theoretical model of liberal education in the studies at a technological university.

  15. Study and Proposal of the Nuclear Power Plant Technology for the Ninh Thuan 2 Project

    International Nuclear Information System (INIS)

    Tran Chi Thanh; Le Van Hong; Hoang Sy Than; Nguyen Van De; Mai Dinh Trung; Nguyen Nhi Dien; Nguyen Minh Tuan; Pham Van Lam; Phan Ngoc Tuyen; Do Chi Dung; Hoang Minh Giang; Le Dai Dien

    2015-01-01

    The Ninh Thuan 1&2 Nuclear Power Plant Projects were approved on November 25th, 2009. At present, the task of NPP technology selection of these projects is an important and complex task. This report will show the acceptable method to create a set of criterion for selecting technology for Ninh Thuan 2 NPP project. The result of evaluation of three NPP technologies, such as ATMEA1, AP1000 and MPWR+ introduced in the Feasibility Study Reports of this project, will be discussed. In conclusion, the AP1000 technology is the first candidate for the Ninh Thuan 2 NPP Project. (author)

  16. Instructors' use of technology in post-secondary undergraduate mathematics teaching: a local study

    Science.gov (United States)

    Jesso, A. T.; Kondratieva, M. F.

    2016-02-01

    In this study, instructors of undergraduate mathematics from post-secondary institutions in Newfoundland were surveyed (N = 13) and interviewed (N = 8) about their use of, experiences with, and views on, technologically assisted teaching. It was found that the majority of them regularly use technologies for organizational and communication purposes. However, the use of math-specific technology such as computer algebra systems, or dynamic geometry software for instructional, exploratory, and creative activities with students takes place mostly on an individual basis, only occasionally, and is very much topic specific. This was even the case for those instructors who use technology proficiently in their research. The data also suggested that familiarity with and discussions of examples of technology implementation in teaching at regular and field-oriented professional development seminars within mathematics departments could potentially increase the use of math-specific technology by instructors.

  17. Enhancing international technology cooperation for climate change mitigation. Lessons from an electromobility case study

    Energy Technology Data Exchange (ETDEWEB)

    Bhasin, Shikha

    2014-07-01

    As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).

  18. Enhancing international technology cooperation for climate change mitigation. Lessons from an electromobility case study

    International Nuclear Information System (INIS)

    Bhasin, Shikha

    2014-01-01

    As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).

  19. The Population Ecology of Technology: An Empirical Study of US Biotechnology Patents from 1976 to 2003

    Science.gov (United States)

    van den Oord, Ad; van Witteloostuijn, Arjen

    2017-01-01

    A detailed understanding of technological change as an evolutionary process is currently not well understood. To increase our understanding, we build upon theory from organizational ecology to develop a model of endogenous technological growth and determine to what extent the pattern of technological growth can be attributed to the structural or systemic characteristics of the technology itself. Through an empirical investigation of patent data in the biotechnology industry from 1976 to 2003, we find that a technology’s internal (i.e., density and diversity) ecological characteristics have a positive effect on its growth rate. The niche’s external characteristics of crowding and status have a negative effect on its growth rate. Hence, applying theory from organizational ecology increases our understanding of technological change as an evolutionary process. We discuss the implications of our findings for the study of technological growth and evolution, and suggest avenues for further research. PMID:28081570

  20. ECLSS Integration Analysis: Advanced ECLSS Subsystem and Instrumentation Technology Study for the Space Exploration Initiative

    Science.gov (United States)

    1990-01-01

    In his July 1989 space policy speech, President Bush proposed a long range continuing commitment to space exploration and development. Included in his goals were the establishment of permanent lunar and Mars habitats and the development of extended duration space transportation. In both cases, a major issue is the availability of qualified sensor technologies for use in real-time monitoring and control of integrated physical/chemical/biological (p/c/b) Environmental Control and Life Support Systems (ECLSS). The purpose of this study is to determine the most promising instrumentation technologies for future ECLSS applications. The study approach is as follows: 1. Precursor ECLSS Subsystem Technology Trade Study - A database of existing and advanced Atmosphere Revitalization (AR) and Water Recovery and Management (WRM) ECLSS subsystem technologies was created. A trade study was performed to recommend AR and WRM subsystem technologies for future lunar and Mars mission scenarios. The purpose of this trade study was to begin defining future ECLSS instrumentation requirements as a precursor to determining the instrumentation technologies that will be applicable to future ECLS systems. 2. Instrumentation Survey - An instrumentation database of Chemical, Microbial, Conductivity, Humidity, Flowrate, Pressure, and Temperature sensors was created. Each page of the sensor database report contains information for one type of sensor, including a description of the operating principles, specifications, and the reference(s) from which the information was obtained. This section includes a cursory look at the history of instrumentation on U.S. spacecraft. 3. Results and Recommendations - Instrumentation technologies were recommended for further research and optimization based on a consideration of both of the above sections. A sensor or monitor technology was recommended based on its applicability to future ECLS systems, as defined by the ECLSS Trade Study (1), and on whether its

  1. Dosimetric impact of dual-energy CT tissue segmentation for low-energy prostate brachytherapy: a Monte Carlo study

    Science.gov (United States)

    Remy, Charlotte; Lalonde, Arthur; Béliveau-Nadeau, Dominic; Carrier, Jean-François; Bouchard, Hugo

    2018-01-01

    The purpose of this study is to evaluate the impact of a novel tissue characterization method using dual-energy over single-energy computed tomography (DECT and SECT) on Monte Carlo (MC) dose calculations for low-dose rate (LDR) prostate brachytherapy performed in a patient like geometry. A virtual patient geometry is created using contours from a real patient pelvis CT scan, where known elemental compositions and varying densities are overwritten in each voxel. A second phantom is made with additional calcifications. Both phantoms are the ground truth with which all results are compared. Simulated CT images are generated from them using attenuation coefficients taken from the XCOM database with a 100 kVp spectrum for SECT and 80 and 140Sn kVp for DECT. Tissue segmentation for Monte Carlo dose calculation is made using a stoichiometric calibration method for the simulated SECT images. For the DECT images, Bayesian eigentissue decomposition is used. A LDR prostate brachytherapy plan is defined with 125I sources and then calculated using the EGSnrc user-code Brachydose for each case. Dose distributions and dose-volume histograms (DVH) are compared to ground truth to assess the accuracy of tissue segmentation. For noiseless images, DECT-based tissue segmentation outperforms the SECT procedure with a root mean square error (RMS) on relative errors on dose distributions respectively of 2.39% versus 7.77%, and provides DVHs closest to the reference DVHs for all tissues. For a medium level of CT noise, Bayesian eigentissue decomposition still performs better on the overall dose calculation as the RMS error is found to be of 7.83% compared to 9.15% for SECT. Both methods give a similar DVH for the prostate while the DECT segmentation remains more accurate for organs at risk and in presence of calcifications, with less than 5% of RMS errors within the calcifications versus up to 154% for SECT. In a patient-like geometry, DECT-based tissue segmentation provides dose

  2. Electrification Futures Study: End-Use Electric Technology Cost and Performance Projections through 2050

    Energy Technology Data Exchange (ETDEWEB)

    Vimmerstedt, Laura J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jadun, Paige [National Renewable Energy Lab. (NREL), Golden, CO (United States); McMillan, Colin A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Steinberg, Daniel C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Muratori, Matteo [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mai, Trieu T. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2018-01-02

    This report provides projected cost and performance assumptions for electric technologies considered in the Electrification Futures Study, a detailed and comprehensive analysis of the effects of widespread electrification of end-use service demands in all major economic sectors - transportation, residential and commercial buildings, and industry - for the contiguous United States through 2050. Using extensive literature searches and expert assessment, the authors identify slow, moderate, and rapid technology advancement sensitivities on technology cost and performance, and they offer a comparative analysis of levelized cost metrics as a reference indicator of total costs. The identification and characterization of these end-use service demand technologies is fundamental to the Electrification Futures Study. This report, the larger Electrification Futures Study, and the associated data and methodologies may be useful to planners and analysts in evaluating the potential role of electrification in an uncertain future. The report could be broadly applicable for other analysts and researchers who wish to assess electrification and electric technologies.

  3. The Making of a CIO: A Grounded Theory Study of Professional Development of Information Technology Executives

    Science.gov (United States)

    Leahy, Kevin B.

    2013-01-01

    The CIO fulfills an important role for most business organizations by leading the information technology department and by aligning the firm's information technology assets with its corporate strategy. There is little research regarding the important components of CIO development and the relationships among these elements. This study examines…

  4. Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches

    Science.gov (United States)

    Garcia-Penalvo, Francicso Jose

    2013-01-01

    Our differences in language, cultures, and history around the world play a vital role in the way we learn. As technology-based education continues to be used worldwide, there is an ever growing interest in how multiculturalism comes into effect. Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches explores the…

  5. A framework for reporting on human factor/usability studies of health information technologies

    NARCIS (Netherlands)

    Peute, Linda W.; Driest, Keiko F.; Marcilly, Romaric; Bras Da Costa, Sabrina; Beuscart-Zephir, Marie-Catherine; Jaspers, Monique W. M.

    2013-01-01

    Increasingly, studies are being published on the potential negative effect of introducing poor designed Health Information Technology (HIT) into clinical settings, relating to technology-induced errors and adverse events. Academic research on HIT design and evaluation is an extremely important

  6. Perception by French Students of the Gendered Nature of Material Artifacts Studied in Technology Education

    Science.gov (United States)

    Colette, Andreucci; Marjolaine, Chatoney

    2017-01-01

    Many studies have shown the importance of the socio-cultural factors that lead girls to desert scientific and technological courses. Over a long period, the contents of the French technology education (TE) college curricula may well have contributed to strengthening the feeling among girls that this discipline was better suited to boys. The choice…

  7. A Qualitative Study of African American Women in Engineering Technology Programs in Community Colleges

    Science.gov (United States)

    Blakley, Jacquelyn

    2016-01-01

    This study examined the experiences of African American women in engineering technology programs in community colleges. There is a lack of representation of African American women in engineering technology programs throughout higher education, especially in community/technical colleges. There is also lack of representation of African American…

  8. Teachers as Participatory Designers: Two Case Studies with Technology-Enhanced Learning Environments

    Science.gov (United States)

    Cober, Rebecca; Tan, Esther; Slotta, Jim; So, Hyo-Jeong; Könings, Karen D.

    2015-01-01

    Teachers are not typically involved as participatory designers in the design of technology-enhanced learning environments. As they have unique and valuable perspectives on the role of technology in education, it is of utmost importance to engage them in a participatory design process. Adopting a case study methodology, we aim to reveal in what…

  9. Integrating Information Technology's Competencies into Academic Nursing Education--An Action Study

    Science.gov (United States)

    Gonen, Ayala; Sharon, Dganit; Lev-Ari, Lilac

    2016-01-01

    Today, in the digital age, we are committed to prepare the future nurse for the information technology-rich workplace, and to help them reducing the "shock reality" upon arriving at the clinical setting. The main aim of the study is to promote the knowledge of Information Competencies Technology among nurses' educators and student. The…

  10. Technology Readiness of School Teachers: An Empirical Study of Measurement and Segmentation

    Science.gov (United States)

    Badri, Masood; Al Rashedi, Asma; Yang, Guang; Mohaidat, Jihad; Al Hammadi, Arif

    2014-01-01

    The Technology Readiness Index (TRI) developed by Parasuraman (2000) was adapted to measure the technology readiness of public school teachers in Abu Dhabi, United Arab Emirates. The study aims at better understanding the factors (mostly demographics) that affect such readiness levels. In addition, Abu Dhabi teachers are segmented into five main…

  11. School District Information Technology Disaster Recovery Planning: An Explanatory Case Study

    Science.gov (United States)

    Gray, Shaun L.

    2017-01-01

    Despite research and practitioner articles outlining the importance information technology disaster plans (ITDRPs) to organizational success, barriers have impeded the process of disaster preparation for Burlington County New Jersey school districts. The purpose of this explanatory qualitative case study was to understand how technology leader…

  12. Developing the 21st-Century Social Studies Skills through Technology Integration

    Science.gov (United States)

    Farisi, Mohammad Imam

    2016-01-01

    Recently, technology has become an educational necessity in global-digital era. Facing these phenomena, social studies (SS) should make innovations related to changes of 21st-century skills and learning paradigm, which is characterized by the principles of disclosure of information, computing, automation, and communication. Technology integration…

  13. Embodied Experiences of Place: A Study of History Learning with Mobile Technologies

    Science.gov (United States)

    Price, S.; Jewitt, C.; Sakr, M.

    2016-01-01

    This paper reports an empirical study that takes a multimodal analytical approach to examine how mobile technologies shape students' exploration and experience of place during a history learning activity in situ. In history education, mobile technologies provide opportunities for authentic experiential learning activities that have the potential…

  14. School Finance and Technology: A Case Study Using Grid and Group Theory to Explore the Connections

    Science.gov (United States)

    Case, Stephoni; Harris, Edward L.

    2014-01-01

    Using grid and group theory (Douglas 1982, 2011), the study described in this article examined the intersections of technology and school finance in four schools located in districts differing in size, wealth, and commitment to technology integration. In grid and group theory, grid refers to the degree to which policies and role prescriptions…

  15. Evaluating Teleworkers' Acceptance of Mobile Technology: A Study Based on the Utaut Model

    Science.gov (United States)

    Mills, Jamia Sharie

    2016-01-01

    Mobile technology has provided flexible methods for employees to complete work-related tasks without being tied to an office. Research has predicted the level of training on mobile technology may impact a user's ability to complete work responsibilities accurately. This study intended to examine what behavior factors from the unified theory of…

  16. Barriers to Technological Acceptance in a Legal Environment: A Case Study of a Florida Law Firm

    Science.gov (United States)

    Owusu, Theophilus D.

    2010-01-01

    Technology is made available in the law firm to promote time efficient tasks and to provide resources that allows the accurate billing and storing of documents. This study examined the impact of three major technologies that are used by attorneys in a law firm. Quantitative procedures facilitated the identification of barriers to Personal Digital…

  17. Managers and Information Technology: A Case Study of Organizational Change in County Government.

    Science.gov (United States)

    Rosenbaum, Howard

    1992-01-01

    Discussion of the interrelationship of information technology, managers, and users, and the structure of public sector organizations focuses on a case study that examined the organizational changes in the information services department of a large, urban county government as a result of the use of sophisticated information technologies. (11…

  18. National priorities for the assessment of clinical conditions and medical technologies: report of a pilot study

    National Research Council Canada - National Science Library

    Lara, María Elena; Goodman, Clifford

    1990-01-01

    ... and Medical Technologies Report of a Pilot Study Maria Elena Lara and Clifford Goodman, editors Priority-Setting Group Council on Health Care Technology Institute of Medicine NATIONAL ACADEMY PRESS WASHINGTON, D.C. 1990 i Copyrightoriginal retained, the be not from cannot book, paper original however, for version formatting, authoritative the typese...

  19. A Study on Teaching Quality of Taiwan Government Training Civil Servants with Educational Technology

    Science.gov (United States)

    Hsiao, Luke H. C.

    2012-01-01

    When economic globalization, informatization, and marketization are rapidly developing, the world is reaching the globally industrial society based on information technology. In such a fierce competition, human resource is gradually placed on the critical role. This study aims to: (1) understand the present situation of Educational Technology and…

  20. Insights into the Intrinsic and Extrinsic Challenges for Implementing Technology Education: Case Studies of Queensland Teachers

    Science.gov (United States)

    Finger, Glenn; Houguet, Belinda

    2009-01-01

    This study, embedded within the "Researching School Change in Technology Education" (RSCTE) project in Queensland, Australia, aimed to gain insights into the intrinsic and extrinsic challenges experienced by teachers during the implementation of technology education within primary school settings. The official publication and launch of…

  1. The Impact of Technological Change; The American Experience. Studies in Employment and Unemployment.

    Science.gov (United States)

    Haber, William; And Others

    Technological change is a complex term involving many more factors than "changes in machinery or automation." Six changes which affect jobs and influence skills in our industrial systems that could logically be called technological change have been identified: (1) scientific management, or time and motion studies, (2) mergers and consolidations,…

  2. A Study on the Impact of Teacher Attitude/Efficacy on the Use of Classroom Technology

    Science.gov (United States)

    Ott, Jeran Louis

    2017-01-01

    Increased access to technology has changed the current educational landscape and, will dramatically affect the future of education. These shifts are redefining the roles of educators and require that teachers have the attributes necessary to legitimately incorporate technology into the classroom. The purpose of this study is to examine existing…

  3. Evaluating interactive technology for an evolving case study on learning and satisfaction of graduate nursing students.

    Science.gov (United States)

    Vogt, Marjorie A; Schaffner, Barbara H

    2016-07-01

    Nursing education is challenged to prepare students for complex healthcare needs through the integration of teamwork and informatics. Technology has become an important teaching tool in the blended classroom to enhance group based learning experiences. Faculty evaluation of classroom technologies is imperative prior to adoption. Few studies have directly compared various technologies and their impact on student satisfaction and learning. The purpose of this study was to evaluate technology enhanced teaching methods on the learning and satisfaction of graduate students in an advanced pharmacology class using an unfolding case study. After IRB approval, students were randomly assigned to one of three groups: blogging group, wiki group or webinar group. Students completed the evolving case study using the assigned interactive technology. Student names were removed from the case studies. Faculty evaluated the case study using a rubric, while blinded to the assigned technology method used. No significant difference was found on case study grades, the range of grades on the assignment demonstrated little differences between the methods used. Students indicated an overall positive impact related to networking and collaboration on a satisfaction survey. Impact of technology methods needs to be explored in other areas of graduate nursing education. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Gas power plant with CO2 handling. A study of alternative technologies

    International Nuclear Information System (INIS)

    Bolland, Olav; Hagen, Roger I.; Maurstad, Ola; Tangen, Grethe; Juliussen, Olav; Svendsen, Hallvard

    2002-01-01

    The report documents a study which compares 12 different technologies for gas power plants with CO 2 handling. The additional costs in removing the CO 2 in connection with electricity production is calculated to at least 18-19 oere /kWh compared to conventional gas power production without CO 2 capture. The calculated extra costs are somewhat higher than previously published figures. The difference is mainly due to that the estimated costs for pipelines and injection system for CO 2 are higher than in other studies. The removal of CO 2 in connection with gas power production implies increased use of natural gas. The most developed technologies would lead to a procentual increase in the gas consumption per kWh electricity of 18-25%. Gas power plants based on the present technologies would have efficiencies in the size of 46-49%. The efficiency of power plants without CO 2 handling is supposed to be 58%. There is no foundation for pointing out a ''winner's' among the compared technologies in the study. The present available technologies excepted, there are no technology which stands out as better than the others from an economic viewpoint. Gas turbine with membrane based separation of oxygen from air (AZEP) has a potential for lower costs but implies challenging technological development and thence considerable technological risks. Two technologies, capture of carbon from natural gas previous to combustion and exhaust gas purification based on absorption, may be employed in 3 - 4 years. The other technologies require more development and maturing. Three of the technologies may be particularly interesting because hydrogen may be produced as a byproduct. Demonstration plant and choice of technology: 1) There is a limited need for demonstration plants with respect to technology development. 2) It is important for the technology development to be able to test various technologies in a laboratory or in a flexible pilot plant. 3) Many technologies and components may be

  5. Correlational Study of Risk Management and Information Technology Project Success

    Science.gov (United States)

    Gillespie, Seth J.

    2014-01-01

    Many IT projects fail despite the best efforts to keep these projects within budget, schedule, and scope. Few studies have looked at the effect of project risk management tools and techniques on project success. The primary focus of this study was to examine the extent to which utilization of project risk management processes influence project…

  6. Technology in Organizational Communication: A Plan for Study.

    Science.gov (United States)

    Breen, Myles P.

    This paper outlines trends in organizational communication studies and proposes that organizational communication be studied through the interaction effects of the medium used in the communication (telephone, television, facsimile, or other media), the type of communication (persuasion, information flow, or negotiation), and the structure of the…

  7. A Study of the Factors Associated with Successful Technology Transfer and their Applicability to Air Force Technology Transfers.

    Science.gov (United States)

    1995-09-01

    transfer project. (D) 8a Organization has a technology transfer organization. (D,A) 10a Marketing and advertising of technologies targeted to relevant...Entrepreneurial (D) Developer: 10A: Marketing and advertising of technologies targeted to relevant industries. Most developers indicate that they marketed...regard to marketing and advertising . 10B: Technology maturation supported by internal units or by contracting out. Technology maturation is the

  8. EDUCATIONAL TECHNOLOGY IN PRACTICE Research and Practical Case Studies from the Field

    Directory of Open Access Journals (Sweden)

    Reviewed by Ozden SAHIN-IZMIRLI

    2010-10-01

    Full Text Available The book starts with an explanation of the reason why the terms found in the book are sometimes used in place of each other. The editors stated that when technological tools are used to establish an effective and productive study process in education, the concept of learning technology is used instead of educational technology. The editors of the book considers the field as complex and vague in terms of the fact that the meanings of the concepts are close to each other in the field of educational technology and that the field provides an opportunity for inter-disciplinary studies. However, according to the editors, this vagueness and complexity shows the superiority of the field. This superiority is explained with the fact that the field of educational technology requires upper-level skills of problem solving and critical thinking and that it presents a multi-dimensional and inter-disciplinary study field. The book was edited by Wanjira Kinuthia and Steward Marshall. Wanjira Kinuthia, an assistant professor at Georgia State University, works in the Department of Middle-Secondary Education and Instructional Technology. Steward Marshall, a professor at the University of the West Indies, is the director of the Distance Education Centre. The book includes five sections and 21 chapters. These sections are “Materials, Methods, and Modalities”, “Technology Implementation and Integration Issues”, “Student Engagement and Learning”, “Building Capacity”, “Using Technology for Performance Improvement and Productivity Enhancement”.

  9. Teaching via Mobile Phone: a Case Study on Malaysian Teachers’ Technology Acceptance and Readiness

    Directory of Open Access Journals (Sweden)

    Issham Ismail

    2013-01-01

    Full Text Available The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers’ acceptance of technology could influence their readiness for the pedagogical use of mobile phone technology if it is to be implemented in school. A quantitative questionnaire was administered to thirty eight teachers who teach Information and Technology (IT subject from different primary schools in Penang, Malaysia during a program on Teachers’ Development. Data revealed that the level of technology acceptance among respondents in terms of awareness and motivation, training and courses, training design and supports and facilities was generally high. Despite this positive acceptance of technology, teachers’ readiness for the use of mobile phone in teaching and learning was found to be at a considerably low level. However, the study identified a significant correlation between respondents’ awareness and motivation towards technology with their readiness for the pedagogical usage of mobile phone. It was also found that gender is a possible factor influencing the respondents’ readiness. As implication, this paper probes the influence of technology acceptance on teachers’ readiness for the pedagogical usage of mobile phone and the possible implications this influence affords.

  10. Study on international publicity and export strategy establishment of nuclear technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ji Bok; Choi, C.O.; Park, K. B.; Chang, M. H.; Kim, K. K.; Yang, M. S.; Jung, I. H.; Kim, K. P.; Wu, J. S.; Jang, C. I.; Han, B. O.; Sim, J. H.; Chung, M.; Chung, J.K

    1999-05-01

    The objective of this study is to devise a proper measure for international publicity and technology export strategy. Analysed and summaries in detail are other countries nuclear policy trend and the current technology development status of Korea Standard Nuclear Plant that we developed on our own technology, design and construction technology for research reactor, System-integrated Modular Advanced Reactor of which design is in progress, Direct use of Spent PWR Fuel in CANDU Reactors, and Radioisotopes. Based on that, the measures are proposed for the export industrialization of nuclear technology and establishment of the export basis. Also the international nuclear cooperation and publicity strategy are suggested to support the technology export basis. By surveying the world nuclear status, the direction for the international cooperation and publicity is settled and the specific publicity strategy is proposed for the cooperation with IAEA and multi-countries and the establishment of the nuclear technology export basis. As part of this project, the panel on major technologies such as Korea Standard Nuclear Plant, HANARO, and System-integrated Modular Advanced Reactor was displayed successfully at the IAEA meeting, which contribute much to the publicity of our nuclear technology to the international nuclear society. (author)

  11. A Study to Improve the Role of Nuclear Energy Technology for the National New Growth Engine

    International Nuclear Information System (INIS)

    Kim, H. J.; Oh, K. B.; Chung, W. S.; Yun, S. W.; Jeong, Ik; Lee, J. H.; Won, B. C.

    2006-04-01

    This Paper aimed at looking for the new growth engines in the nuclear R and D field which leads the national prosperity and people's welfare in the 21st Century. As new growth engines in the nuclear R and D field, 17 innovative technologies(eight nuclear energy innovation system technologies and nine radiation fusion technologies) were selected. Selected technologies were evaluated through a expert group's peer review in accordance with criteria such as the aspect of technology, economy, and national strategy. In accordance with the expected commercialization time of the innovative technologies in the leading countries, these were categorized into two or three groups and In the aspect of their technology development level, 20 ∼ 40% technological gaps were shown. According to the business aspect, it was expected that innovative nuclear technologies selected as the new growth engines would have world markets of the range of 0.01 ∼ 100 billion $/year and the sales of 0.001 ∼ 10 billion $/year. Technology development strategy was suggested through colligation of the expert survey and an innovation theory. From the viewpoint of innovation stage, most of new growth engines in the nuclear R and D field were in position of the transitional phase(world) and the adaption stage(home). It was required that process and product technologies should be standardization in accordance with each innovation stage. For the successful commercialization, it was more important that R and D capability in R and D institutions should be improved and that appropriate funding and R and D infra should be well established and supportive. The results of this study will contribute to the establishment of the effective technology development strategy in the nuclear R and D field

  12. Technological Health Intervention in Population Aging to Assist People to Work Smarter not Harder: Qualitative Study

    Science.gov (United States)

    2018-01-01

    Background Technology-based health care has been promoted as an effective tool to enable clinicians to work smarter. However, some health stakeholders believe technology will compel users to work harder by creating extra work. Objective The objective of this study was to investigate how and why electronic health (eHealth) has been applied in Taiwan and to suggest implications that may inspire other countries facing similar challenges. Methods A qualitative methodology was adopted to obtain insightful inputs from deeper probing. Taiwan was selected as a typical case study, given its aging population, advanced technology, and comprehensive health care system. This study investigated 38 stakeholders in the health care ecosystem through in-depth interviews and focus groups, which provides an open, flexible, and enlightening way to study complex, dynamic, and interactive situations through informal conversation or a more structured, directed discussion. Results First, respondents indicated that the use of technology can enable seamless patient care and clinical benefits such as flexibility in time management. Second, the results suggested that a leader’s vision, authority, and management skills might influence success in health care innovation. Finally, the results implied that both internal and external organizational governance are highly relevant for implementing technology-based innovation in health care. Conclusions This study provided Taiwanese perspectives on how to intelligently use technology to benefit health care and debated the perception that technology prevents human interaction between clinicians and patients. PMID:29301736

  13. Isolated heart models: cardiovascular system studies and technological advances.

    Science.gov (United States)

    Olejnickova, Veronika; Novakova, Marie; Provaznik, Ivo

    2015-07-01

    Isolated heart model is a relevant tool for cardiovascular system studies. It represents a highly reproducible model for studying broad spectrum of biochemical, physiological, morphological, and pharmaceutical parameters, including analysis of intrinsic heart mechanics, metabolism, and coronary vascular response. Results obtained in this model are under no influence of other organ systems, plasma concentration of hormones or ions and influence of autonomic nervous system. The review describes various isolated heart models, the modes of heart perfusion, and advantages and limitations of various experimental setups. It reports the improvements of perfusion setup according to Langendorff introduced by the authors.

  14. Using Semantic Web Technologies to Reproduce a Pharmacovigilance Case Study

    NARCIS (Netherlands)

    M. Hildebrand (Michiel); R Hoekstra; J.R. van Ossenbruggen (Jacco)

    2013-01-01

    htmlabstractWe provide a detailed report of a reproduction study of a paper published in the International Journal of Medical Sciences (IJMS). We first use the PROV-O ontology to model our reconstruction of the computational workflow of the original experiment and to systematically explicate all

  15. Patterns of Mobile Technology Use in Teaching: A Pilot Study

    Science.gov (United States)

    Seifert, Tami

    2015-01-01

    The use of mobile learning spaces is an opportunity to break the boundaries of the classroom and to prepare student-teachers towards teaching classes tailored to the future teaching market, while providing the tools and inspiration to lead change in schools. The purpose of this precursor study is to examine the subject of implementing mobile…

  16. Infusing technology into general studies program: The Nnamdi ...

    African Journals Online (AJOL)

    This paper is intended to give a summary of the efforts of school of general studies, Nnamdi Azikiwe University at moving in specified dimensions to realise her present status in blended procedures. It is hoped that the measure will be introductory enough to encourage and motivate other tertiary institutions to get in step.

  17. Distance Education in Information Technology, a case study

    DEFF Research Database (Denmark)

    Helbo, Jan; Knudsen, Morten

    2002-01-01

    , it is much more risky if the on-campus model is transferred directly to off-campus learning. The main reasons are that the students must communicate electronically, and that they are under a fierce time strain, studying part time and typically with a full time job and a family. Experiences with this type...

  18. Technology roadmap study on carbon capture, utilization and storage in China

    International Nuclear Information System (INIS)

    Zhang, Xian; Fan, Jing-Li; Wei, Yi-Ming

    2013-01-01

    Carbon capture, utilization and storage (CCUS) technology will likely become an important approach to reduce carbon dioxide (CO 2 ) emissions and optimize the structure of energy consumption in China in the future. In order to provide guidance and recommendations for CCUS Research, Development and Demonstration in China, a high level stakeholder workshop was held in Chongqing in June 2011 to develop a technology roadmap for the development of CCUS technology. This roadmap outlines the overall vision to provide technically viable and economically affordable technological options to combat climate change and facilitate socio-economic development in China. Based on this vision, milestone goals from 2010 to 2030 are set out in accordance with the technology development environment and current status in China. This study identifies the critical technologies in capture, transport, utilization and storage of CO 2 and proposes technical priorities in the different stages of each technical aspect by evaluating indices such as the objective contribution rate and technical maturity, and gives recommendations on deployment of full-chain CCUS demonstration projects. Policies which would support CCUS are also suggested in this study. - Highlights: • A technology roadmap for CCUS development in China from 2010 to 2030 is presented. • Sound data and analysis in combination with expert workshops are used. • Critical technologies in CCUS are identified. • Priority actions of all stages are identified and proposed. • Guidance and recommendations for CCUS RD and D are provided

  19. Barriers and benefits to using mobile health technology after operation: A qualitative study.

    Science.gov (United States)

    Abelson, Jonathan S; Kaufman, Elinore; Symer, Matthew; Peters, Alexander; Charlson, Mary; Yeo, Heather

    2017-09-01

    Recently, mobile health technology has emerged as a promising avenue for improving physician-patient communication and patient outcomes. The objective of our study was to determine the public's perception of barriers and benefits to using mobile health technology technologies to enhance recovery after operation. We used the Empire State Poll to ask 2 open-ended questions to 800 participants assessing their perceptions of benefits and barriers to use mobile health technology after operation. All responses were coded independently, and any discrepancies were resolved by consensus. We used grounded theory to allow themes to arise from the codes. Interrater reliability was calculated using Cohen's Kappa. Participants identified a range of possible barriers to using mobile health technology apps after operation including: protecting personal health information, technology effectiveness and failure, preference for face-to-face interaction with their surgeon, level of effort required, and ability of the older adults to navigate mobile health technology. Participants identified multiple possible benefits including: better monitoring, improved communication with their surgeon, minimizing follow-up visits, improved convenience, and increased patient knowledge. In the study, 15% of all respondents stated there were no barriers whereas 6% stated there were no benefits. Participants were receptive to the many potential benefits of this technology to enhance not only their relationships with providers and the convenience of access, but also their health outcomes. We must address participants concerns about data security and their fears of losing a personal relationship with their doctor. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Technological studies on uranium refining at nuclear materials authority, Egypt

    International Nuclear Information System (INIS)

    Mohammed, H.S.

    1997-01-01

    In 1992 nuclear materials authority (NMA) took a decision to establish yellow cake refining. Unit so as to study refining of El-Atshan yellow cake which recently produced by ion-exchange pilot plant, production sector. The research studies followed the conventional refining rout to produce nuclear grade UO 3 . This implies investigations on some common solvents to refine the cake viz. tri alkyl phosphates, tri alkyl phosphine oxides, dialkyl phosphoric acid as well as high-molecular weight long-chain tertiary amines. Moreover, non-conventional refining process has also been presented depending on the selectivity of uranyl ion to be dissolved by carbonate and to be precipitated by hydrogen peroxide. Most of the proposed processes were found feasible to refine El-Atshan yellow cake. however, the non- conventional refining process appears to be the most promising, owing to its superior performance and economy

  1. Study on structural materials used in thermonuclear fusion technology

    International Nuclear Information System (INIS)

    Billa, R.; Amaral, D.

    1995-01-01

    The main problem related to the construction of a thermonuclear fusion reactor is the absence of suitable materials for the process, concerning to temperature limits, heat flux and life time. The first wall is the most critical part of the structure, being submitted to radiation effects, ionic corrosion and coolant, besides thermal fatigue and tension produced by cyclical burning. The AISI 316(17-12SPH) stainless steel is used as structural material, which has a wide known database. This work proposes an alternative material study to be used in the future thermonuclear fusion reactors. As a option a study on the utilization of Cr-Mn(Fe-17 Mn-10 Cr-0,1 C) steels and their alloy variations is presented

  2. Study of Tandem Accelerator Technology and Its Prospects

    International Nuclear Information System (INIS)

    Sigit-Hariyanto; Sudjatmoko; Djoko-S-Pudjorahardjo; Suryadi; Widdi-Usada; Suprapto; Djasiman; Tono-Wibowo; Agus-Purwadi

    2000-01-01

    Tandem accelerator is an ion acceleration tool in which negative ions injected in the accelerator tube and stripped to become positive ions, then accelerated by electrostatic high voltage such that its energy is multiplied. In this paper, we describe the prospect of accelerator application briefly in agriculture and biotechnology, industry, health and medicine, environment fields. Technical study on tandem accelerator included SNICS and alphatross ion sources, acceleration system and stripper system. The study result for many kinds of negative ions and its current which should be injected in the accelerator tube and the output of tandem accelerator H + , and the distribution of C + , Ni + , Au + , Br + ion on varying charge state is shown. (author)

  3. A study into life cycle environmental impacts of photovoltaic technologies

    International Nuclear Information System (INIS)

    1996-01-01

    This study presents a Life Cycle Assessment of Photovoltaic Cells (LCA). It was undertaken by Environmental Resources Management (ERM) on behalf of ETSU for the United Kingdom Department of Trade and Industry (DTI). This study uses the technique of LCA to examine all aspects of the production, use and disposal of PVs and the consequent environmental effects. This allows an appraisal of the environmental effects of increasing UK production of PVs to supply more demand for electricity in the EU and the developing world. Impacts result from obtaining raw materials, manufacturing solar power generating equipment, and any final disposal or recycling requirements. The environmental impacts resulting from these phases are known as the PV LIfe Cycle impacts. (author)

  4. Environmental Baseline Survey Report for the Title Transfer of Land Parcel ED-4 at the East Tennessee Technology Park, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    SAIC

    2008-05-01

    This environmental baseline survey (EBS) report documents the baseline environmental conditions of a land parcel referred to as 'ED-4' (ED-4) at the U. S. Department of Energy's (DOE's) East Tennessee Technology Park (ETTP). DOE is proposing to transfer the title of this land to the Heritage Center, LLC. Parcel ED-4 is a land parcel that consists of two noncontiguous areas comprising a total of approximately 18 acres located east of the ETTP. The western tract of ED-4 encompasses approximately 8.5 acres in the northeastern quadrant of the intersection of Boulevard Road and Highway 58. The eastern tract encompasses an area of approximately 9.5 acres in the northwestern quadrant of the intersection of Blair Road and Highway 58 (the Oak Ridge Turnpike). Aerial photographs and site maps from throughout the history of the ETTP, going back to its initial development in the 1940s as the Oak Ridge Gaseous Diffusion Plant (ORGDP), indicate that this area has been undeveloped woodland with the exception of three support facilities for workers constructing the ORGDP since federal acquisition in 1943. These three support facilities, which were located in the western tract of ED-4, included a recreation hall, the Town Hall Camp Operations Building, and the Property Warehouse. A railroad spur also formerly occupied a portion of Parcel ED-4. These former facilities only occupied approximately 5 percent of the total area of Parcel ED-4. This report provides supporting information for the transfer of this government-owned property at ETTP to a non-federal entity. This EBS is based upon the requirements of Sect. 120(h) of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). In order to support a Clean Parcel Determination (CPD) in accordance with CERCLA Sect. 120(h)(4)(d), groundwater and sediment samples were collected within, and adjacent to, the Parcel ED-4 study area. The potential for DOE to make a CPD for ED-4 is

  5. Studies of the experimental technologies of radiative opacity

    International Nuclear Information System (INIS)

    Zhang Jiyan; Yang Guohong; Ding Yaonan; Yang Jiamin; Li Jun; Zhang Wenhai; He Yingling; Wang Yaomei; Huang Haodong

    2004-12-01

    On the SHENGUANG-II laser facility, integrated experiment for opacity measurement was performed and related physical items were studies. In the experiment, some new-typed diagnosing device were also tested. The experiment includes three contents: (1) Investigation of the measurement technique of absorption spectra in the keV region; (2) Investigation of the measurement technique of dual point projection spectroscopy; (3) Investigation of the temperature and density parameters of the experimental samples. (authors)

  6. Interrelations between business and technology : a case study

    OpenAIRE

    2014-01-01

    M.Ing. (Engineering Management) The current research investigated the inter-relationship between Steve Jobs and Apple Company. The study looked at Steve if he launched Apple with business orientation. The researcher used Yin’s (1994) single case, holistic design research method and looked at the data gathered from thirty-seven authors. Steve Jobs’ business orientation was measured using Snaddon (2008) business measures. Symbols were used to indicate whether the evidence found from differen...

  7. Case study of siting technology for underground nuclear power plant

    International Nuclear Information System (INIS)

    Hibino, Satoshi; Komada, Hiroya; Honsho, Shizumitsu; Fujiwara, Yoshikazu; Motojima, Mutsumi; Nakagawa, Kameichiro; Nosaki, Takashi

    1991-01-01

    Underground siting method is one of new feasible siting methods for nuclear power plants. This report presents the results on case studies on underground siting. Two sites of a steeply inclined and plateau like configurations were selected. 'Tunnel type cavern; all underground siting' method was applied for the steeply inclined configuration, and 'shaft type semi-cavern; partial underground siting' method was applied for the plateau like configuration. The following designs were carried out for these two sites as case studies; (1) conceptual designs, (2) geological surveys and rock mechanics tests, (3) stability analysis during cavern excavations, (4) seismic stability analysis of caverns during earthquake, (5) reinforcement designs for caverns, (6) drainage designs. The case studies showed that these two cases were fully feasible, and comparison between two cases revealed that the 'shaft type semi-cavern; partial underground siting' method was more suitable for Japanese islands. As a first step of underground siting, therefore, the authors recommend to construct a nuclear power plant by this method. (author)

  8. Renewable energy technology portfolio planning with scenario analysis: A case study for Taiwan

    International Nuclear Information System (INIS)

    Chen, T.-Y.; Yu, Oliver S.; Hsu, George Jyh-yih; Hsu, Fang-Ming; Sung, W.-N.

    2009-01-01

    This paper presents the results of a case study of applying a systematic and proven process of technology portfolio planning with the use of scenario analysis to renewable energy developments in Taiwan. The planning process starts with decision values of technology development based on a survey of society leaders. It then generates, based on expert opinions and literature search, a set of major technology alternatives, which in this study include: wind energy, photovoltaic, bio-energy, solar thermal power, ocean energy, and geothermal energy. Through a committee of technical experts with diversified professional backgrounds, the process in this study next constructs three scenarios ('Season in the Sun', 'More Desire than Energy', and 'Castle in the Air') to encompass future uncertainties in the relationships between the technology alternatives and the decision values. Finally, through a second committee of professionals, the process assesses the importance and risks of these alternative technologies and develops a general strategic plan for the renewable energy technology portfolio that is responsive and robust for the future scenarios. The most important contributions of this paper are the clear description of the systematic process of technology portfolio planning and scenario analysis, the detailed demonstration of their application through a case study on the renewable energy development in Taiwan, and the valuable results and insights gained from the application.

  9. Science and Technology for the Future Force. FY2006 Summer Study

    National Research Council Canada - National Science Library

    Adler, E. A; Herrera, Gilbert V; Otstott, Charles

    2007-01-01

    .... The ASB approach to the study looked at five specific areas of Army response to S&T challenges: Strategic Outreach, Cross-Cutting Initiatives, Gap Analysis Process, Technology Transition, and Strategic Management...

  10. Debating the future of genetically modified plants - bridging knowledge dimensions. A technology foresight study

    DEFF Research Database (Denmark)

    Borch, Kristian; Rasmussen, Birgitte

    2003-01-01

    Rapid developments in, and the controversial nature of, biotechnology call for communication, networks, partnerships, and collaboration in research, not just among researchers but also between researchers and research “users” in industry, government, andelsewhere. Technological foresight appears...... to offer a coordinating method for developing and strengthening those linkages. To test this, a technological foresight study was performed on genetically modified (GM) crop technology in the Danish context. Thebackground to the study was the conflict and intense debate in Denmark over applications of gene...... public audience finds it hard to comprehend this type of debate. The study pursues the notion thatpublic dialogue can act as a driver of future applications in the technological domain, specifically GM crops. The study concluded with a stakeholder workshop that revealed three key issues that might...

  11. Technological Development of High-Performance MALDI Mass Spectrometry Imaging for the Study of Metabolic Biology

    Energy Technology Data Exchange (ETDEWEB)

    Feenstra, Adam D. [Iowa State Univ., Ames, IA (United States)

    2016-12-17

    This thesis represents efforts made in technological developments for the study of metabolic biology in plants, specifically maize, using matrix-assisted laser desorption/ ionization-mass spectrometry imaging.

  12. A case study evaluation of the use of video technology in concrete pavement evaluation.

    Science.gov (United States)

    2000-01-01

    This report presents the results of an evaluation of video technology as a possible solution to the problem of safely collecting objective condition data for prioritizing concrete pavement rehabilitation needs in Virginia. The study involved the eval...

  13. Artist concept of Mercury program study of medical effects and technology

    Science.gov (United States)

    1964-01-01

    Artist concept of Mercury program study of medical effects and technology development. Drawing depicts cut-away view of Mercury capsule orbiting the Earth, showing the astronaut and his capsule's hardware.

  14. A study of the use of bio-based technologies (lubricant and grease) in rail applications.

    Science.gov (United States)

    2014-05-01

    The objective of the project was to study the efficacy of using bio-based lubricant and grease technologies in railroad applications : (locomotives and maintenance of way equipment). Several commercially available rail curve greases were identified a...

  15. Acceptance of a new technology for management of obstetric hemorrhage: a qualitative study from rural Mexico.

    Science.gov (United States)

    Berdichevsky, Karla; Tucker, Christine; Martínez, Alberto; Miller, Suellen

    2010-05-01

    We conducted a qualitative study to explore responses to a low-technology first-aid device for management of life-threatening obstetric hemorrhage in rural health facilities in Mexico. This entailed in-depth, semistructured interviews with clinical and administrative staff (n = 70) involved in pilot studies of the nonpneumatic antishock garment (NASG) at primary health care facilities and rural hospitals. We found that staffs' response fell into four categories: owning, doubting, resisting, and rejecting. Overall, there were positive reactions to the garment as a relevant technology for saving women's lives. Findings will be used for future implementation of the garment and other new technologies.

  16. Radiation processing technology for cosmetics: a report on a Canadian study

    International Nuclear Information System (INIS)

    Reid, B.D.; Wilson, B.K.

    1993-01-01

    For several years some cosmetic raw materials and finished products have been successfully treated with irradiation to control microbial growth. Basic studies have been initiated to test the successful application of irradiation to a raw material or finished product in the cosmetics industry. Acceptance of this technology by industry and by regulatory agencies, is dependent upon the correct application of the technology and documenting the results of carefully controlled studies. A short list of raw materials was selected on which the immediate test work was undertaken. It includes talc, starch, gelatin and bentonite. This will increase confidence and expertise in this technology. (author)

  17. Technology for advanced liquefaction processes: Coal/waste coprocessing studies

    Energy Technology Data Exchange (ETDEWEB)

    Cugini, A.V.; Rothenberger, K.S.; Ciocco, M.V. [Pittsburgh Energy Technology Center, PA (United States)] [and others

    1995-12-31

    The efforts in this project are directed toward three areas: (1) novel catalyst (supported and unsupported) research and development, (2) study and optimization of major operating parameters (specifically pressure), and (3) coal/waste coprocessing. The novel catalyst research and development activity has involved testing supported catalysts, dispersed catalysts, and use of catalyst testing units to investigate the effects of operating parameters (the second area) with both supported and unsupported catalysts. Several supported catalysts were tested in a simulated first stage coal liquefaction application at 404{degrees}C during this performance period. A Ni-Mo hydrous titanate catalyst on an Amocat support prepared by Sandia National laboratories was tested. Other baseline experiments using AO-60 and Amocat, both Ni-Mo/Al{sub 2}O{sub 3} supported catalysts, were also made. These experiments were short duration (approximately 12 days) and monitored the initial activity of the catalysts. The results of these tests indicate that the Sandia catalyst performed as well as the commercially prepared catalysts. Future tests are planned with other Sandia preparations. The dispersed catalysts tested include sulfated iron oxide, Bayferrox iron oxide (iron oxide from Miles, Inc.), and Bailey iron oxide (micronized iron oxide from Bailey, Inc.). The effects of space velocity, temperature, and solvent-to-coal ratio on coal liquefaction activity with the dispersed catalysts were investigated. A comparison of the coal liquefaction activity of these catalysts relative to iron catalysts tested earlier, including FeOOH-impregnated coal, was made. These studies are discussed.

  18. Novel technology to prepare oral formulations for preclinical safety studies.

    Science.gov (United States)

    Niwa, Toshiyuki; Hashimoto, Naofumi

    2008-02-28

    A novel method to prepare oral formulations, normally suspended dosage form, for preclinical safety studies in animals has been developed using a rotation/revolution mixer. Small hard balls made of zirconia were added to the mixing process to evaluate effectiveness in making a high quality suspension. The driving with balls loaded in the cylindrical container (vessel) of the mixer was quite efficient in dispersing and milling the particles of the active pharmaceutical ingredient (API) in an aqueous medium. The API powder and a small amount of oral aqueous medium (vehicle) were successfully mixed by the spinning motion of the balls in the vessel as though the paste-like suspension was kneaded with a mortar and pestle. It was found that the milled suspension with the mean size of 10-20microm could be prepared, in addition finer milling of less than 10microm could be achieved by selecting the material of vessel. Optimum driving conditions including mixing time, size and quantity of balls, and the standard operational procedure was established using compounds varying in physicochemical properties. The particle size and quantitative analysis by HPLC showed that the resultant suspension was well-milled and highly homogeneous with the nearly intended concentration of API. The proposed method established by this experiment could be applied to the actual safety studies in the real preparation scale of oral suspension.

  19. Study on Integration Treatment Technology of Waste Emulsion from Machining Processing

    OpenAIRE

    Xin-dong Li; Wan-fu Huang

    2013-01-01

    The study studied the treatment technology of high concentration emulsion wastewater in metal machining plant. By analyzing the properties of emulsion wastewater, the author used the combination process of membrane technology + Fe-C micro-electrolysis + membrane bioreactor to treat the wastewater. Through the ceramic membrane, the removal rate of CODCr can reach 95%. Fe-C micro-electrolysis treatment can improve the biodegradability of wastewater, lastly through the membrane bioreactor treatm...

  20. Global Positioning Systems (GPS) Technology to Study Vector-Pathogen-Host Interactions

    Science.gov (United States)

    2016-12-01

    Award Number: W81XWH-11-2-0175 TITLE: Global Positioning Systems (GPS) Technology to Study Vector-Pathogen-Host Interactions PRINCIPAL...Positioning Systems (GPS) Technology to Study Vector-Pathogen-Host Interactions 5b. GRANT NUMBER W81XWH-11-2-0175 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...genetic diversity in the population, in hospitalized children with severe dengue illness and cluster investigation of their neighborhoods, and by using

  1. Introduction and uptake of new medical technologies in the Australian health care system: a qualitative study.

    Science.gov (United States)

    Gallego, Gisselle; Casey, Robert; Norman, Richard; Goodall, Stephen

    2011-10-01

    The aim of this study was to explore the views and perceptions of stakeholders about the current national health technology assessment process conducted by the Medical Services Advisory Committee (MSAC) and its role in the uptake and diffusion of new medical technologies in Australia. Data collection occurred over a nine month period (August 2008-April 2009). Twenty in-depth, semi-structured interviews were conducted with individuals from four stakeholders groups: (i) MSAC members and evaluators, (ii) academic and health technology assessment experts, (iii) medical industry representatives and (iv) medical specialists. Interviews were digitally recorded, transcribed verbatim and coded using a constant comparative method. Respondents expressed a consensus opinion that the MSAC process is generally fair and transparent, and has been increasingly so over time. The process was described as "flexible" and "intuitive" yet also "idiosyncratic" due to the nature of the technologies being appraised. Approval by MSAC was generally reported to be increasingly important once a technology becomes more widely used. While successful MSAC approval was felt to be important for widespread distribution of a new technology, it was viewed more as a "facilitator of the uptake of new technologies" as opposed to a primary "driver" of technology uptake. Instead, other factors were identified as providing the actual impetus for the uptake of new technologies, with MSAC approval and reimbursement eventually helping facilitate more widespread diffusion. MSAC's decision making process is perceived as fair but with room for improvement. Its role in the uptake and diffusion of new medical technologies in Australia is limited. MSAC does not act as a barrier to significant market penetration of new procedures and medical technologies. However reimbursement is a trigger for increased use. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  2. Developing Public Policies for New Welfare Technologies – A Case Study of Telemedicine and Telehomecare

    DEFF Research Database (Denmark)

    Tambo, Torben

    2012-01-01

    and communication-based technologies (ICT) for homecare and monitoring (telemedicine, telehomecare). Despite major investments and national commitment, public policies have not yet found a general approach to move from technological and clinical opportunity and into large-scale regular use of the technology...... (normalisation). This article provides two case studies from Denmark; one case with hypertension monitoring at a local level and another case on national policy implementation through funding of selected demonstration projects. Among the findings are that policy-making processes certainly face major challenges...... in capturing research and development for the transition of technologies into working practice. Furthermore, policy approaches of supporting experimentation and demonstration are found inadequate in promoting technology into a level of normalisation in highly cross-organisational operational environments...

  3. Study on the Contribution of Nuclear and RI Technology to the National Economy

    International Nuclear Information System (INIS)

    Lee, Man Ki; Moon, K. H.; Kim, S. S.

    2004-12-01

    This study evaluated the economic value addition of nuclear power generation technology and radio-isotope(RI) technology quantitatively by using modified Input-Output table. For the nuclear power generation technology, the economic effect of both power plant construction and operation was evaluated. On the other hand, the economic effect of the RI utilization on the national economy was evaluated for RI technology. Firstly, the total economic value addition from nuclear power generation(both construction and operation) was estimated as 1.4% of Gross Domestic Product(GDP) in 2000. Among them, 1.2% was from nuclear power plant operation and the rest was from construction. On the other hand, the economic value addition from RI technology has continuously increased. Its share of GDP increased from 0.30% in 1980 to 0.58 in 2000

  4. Survey and studies on the roles of nuclear power development in economy and technology

    International Nuclear Information System (INIS)

    1985-01-01

    The development and utilization of nuclear energy is principally for security of energy supplies but, on the other hand, is contributing largely to the economic activities and technology developments in Japan. In order to clarify the economic and the technological roles played by the nuclear energy development and utilization, Atomic Energy Commission has made survey and studies on the present state of nuclear power industry and of nuclear power technology and the respective effects in other areas. The nuclear power industry, through its high growth, is now a substantial portion, and so has significant influence, in Japan's whole economic activities. Then, the nuclear power technology, started with its introduction, is now on the world's leading level. Its effects in other areas include quality control, system technology, etc. (Mori, K.)

  5. Personality and Persuasive Technology: An Exploratory Study on Health-Promoting Mobile Applications

    Science.gov (United States)

    Halko, Sajanee; Kientz, Julie A.

    Though a variety of persuasive health applications have been designed with a preventive standpoint toward diseases in mind, many have been designed largely for a general audience. Designers of these technologies may achieve more success if applications consider an individual's personality type. Our goal for this research was to explore the relationship between personality and persuasive technologies in the context of health-promoting mobile applications. We conducted an online survey with 240 participants using storyboards depicting eight different persuasive strategies, the Big Five Inventory for personality domains, and questions on perceptions of the persuasive technologies. Our results and analysis revealed a number of significant relationships between personality and the persuasive technologies we evaluated. The findings from this study can guide the development of persuasive technologies that can cater to individual personalities to improve the likelihood of their success.

  6. Pilot-scale study of ballasted-flocculation technology

    International Nuclear Information System (INIS)

    Liem, L.E.; Brant, W.H.; Gagne, B.; Michaud, J.; Beaudet, J.-F.; Landry, D.; Braden, K.; Campbell, D.

    2002-01-01

    A ballasted-flocculation pilot-scale study was undertaken to treat a wide-range river water turbidity (17 to 2,608 NTU). The pilot-scale unit was operated at flowrates of 30 to 63 m 3 /h, which corresponded to loading rates of 40 to 84 m/h. Coagulants, polymers, and microsand were added to enhance the floc agglomeration. The weighted flocs settled rapidly resulting in excellent turbidity removals of 94.7 to 99.9%. At the peak turbidity, the unit had a 99.9% removal performance (2.7 from 2,608 NTU) at a loading rate of 40 m/h. In this case, polyaluminum silicosulfate and anionic polymer dosages were 82 and 1 mg/L, respectively. The microsand recycle rate was kept constant at 4.5 m 3 /h, and 1mg microsand was added for each liter of water treated. (author)

  7. A fruitful encounter between Cognitive Science and Science & Technology Studies

    Directory of Open Access Journals (Sweden)

    Aleksandra Derra

    2013-06-01

    Full Text Available Scholars deriving from different schools of thought, especially if these grow out of different traditions, do not meet too frequently, and it is even more rare for these meeting to result in creating theories or research practices that would be cognitively surprising or rich in refreshing ideas. Therefore, the material we present in the current issue of Avant (1/2013 is exceptional. In the following part you can read articles by representatives of the so-called Toruń (postconstructivist school, “(Postconstructivism on the subject of techno-science” by Ewa Bińczyk and “A-socio-logy of a condition. A study of controversies surrounding etiology, diagnosis and therapy of ADHD” by Łukasz Afeltowicz and Michał Wróblewski.

  8. submitter Performance studies of CMS workflows using Big Data technologies

    CERN Document Server

    Ambroz, Luca; Grandi, Claudio

    At the Large Hadron Collider (LHC), more than 30 petabytes of data are produced from particle collisions every year of data taking. The data processing requires large volumes of simulated events through Monte Carlo techniques. Furthermore, physics analysis implies daily access to derived data formats by hundreds of users. The Worldwide LHC Computing Grid (WLCG) - an international collaboration involving personnel and computing centers worldwide - is successfully coping with these challenges, enabling the LHC physics program. With the continuation of LHC data taking and the approval of ambitious projects such as the High-Luminosity LHC, such challenges will reach the edge of current computing capacity and performance. One of the keys to success in the next decades - also under severe financial resource constraints - is to optimize the efficiency in exploiting the computing resources. This thesis focuses on performance studies of CMS workflows, namely centrallyscheduled production activities and unpredictable d...

  9. A selective study of Information technologies to improve operations efficiency in construction

    Directory of Open Access Journals (Sweden)

    Konikov Alexandr

    2018-01-01

    Full Text Available Today, information technologies (IT are used in almost every production industry. While the aspects of IT are well studied and discussed in relevant monographs, articles, web sources, etc., this paper reviews the performance improvement options in the construction industry by leveraging IT. From a wide range of information technologies the author has picked the most relevant solutions, from his point of view, based on several considerations, the most important one being the lack of adequate attention to these technologies specifically in the construction industry. The paper covers the following technologies: Big Data (a smart technology for high-speed processing of huge and diverse data arrays; situation centers (SC for construction and operations projects (SCs are successfully used in other industries for operating control of sophisticated facilities; data warehouses (DW for the construction industry (DWs are viewed as a standalone project rather than a supplement to Data Mining or Big Data; operational and dispatch radio communication service (radio communication can ensure instant connectivity between several subscribers; VSAT (a satellite technology for prompt connection of a distant construction site with the 'outer world' when no alternatives are available. The paper briefly presents the essence of each technology, describes the pre-requisites for its use in construction, outlines the key advantages, limits and shortcomings, and lists construction projects where it shall be worthwhile to use a specific technology projects.

  10. Study on the knowledge management of strategic alliances in high technology enterprises

    Institute of Scientific and Technical Information of China (English)

    TANG Yu; WANG Hong-qi; WANG Shan-shan

    2005-01-01

    With the development of knowledge economy, the competition between high technology enterprises has gradually evolved into the competition of core competence based on knowledge, because high technology enterprises are typical knowledge-based enterprises. Few enterprises, especially for high technology firms, have all of the knowledge they need to compete effectively in the marketplace both at home and abroad, so more and more high technology companies are taking the advantage of strategic alliances to get their complementary knowledge. Since knowledge is the source of an enterprise' s competitiveness, knowledge management has become the most important means for enterprises to gain competitive advantage. There has been an increased growth in the literature on strategic alliances in recent decades. But what is less discussed in the existing literature on strategic alliances is the issue of knowledge management of strategic alliances in high technology enterprises. Based on the characteristics of strategic alliances in high technology enterprises, and in line with the implication and the goal of knowledge management, this study tries to delve into this issue. The paper analyzes the key factors relevant to the knowledge management of strategic alliances in high technology enterprises and proposes guide lines on the process and measures that should be taken in the knowledge management of strategic alliances in high technology enterprises.

  11. The use of new technologies in Cohort studies

    Directory of Open Access Journals (Sweden)

    Carlos Antonio Bruno da Silva

    2010-03-01

    élites de posicionamento (GPS para a localização de residências, o uso de coletas de DNA para comparações futuras, as bases de dados institucionais e governamentais são fontes de informações que abreviam, minimizam gastos e dão maior confiabilidade aos estudos de muito longa duração.Tem-se visto antigos trabalhos realizados há décadas sendo submetidos a novas avaliações estatísticas com o desenvolvimento de novas teorias e descobertas. Neste número da revista brasileira em promoção da saúde, acompanhamos o nascimento de uma nova coorte(14, que acompanhará a evolução dos determinantes de saúde de população de uma grande comunidade do Nordeste do Brasil.REFERÊNCIAS1. Morabia A, Guthold R. Wilhelm Weinberg’s 1913Large Retrospective Cohort Study: a rediscovery. Am JEpidemiol. 2007;165(7:727-33.2. Doll R. Cohort studies: history of the method. II.Retrospective cohort studies. Soz Praventivmed.2001;46(3:152-60. Erratum in: Soz Praventivmed2002;47(2:90.3. Dawber TR, Meadors GF, Moore Jr. FE. Epidemiologicalapproaches to heart disease: the Framingham Study.Am J Public Health Nations Health. 1951;41(3:279-81.4. Fonseca MGU, Peres F, Firmo JOA, Uchoa E.,Percepção de risco: maneiras de pensar e agirno manejo de agrotóxicos. Ciênc saúde coletiva[periódico na Internet]. 2007 Mar [acesso em 2010Maio 26]; 12(1:39-50. Disponível em: http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1413-81232007000100009&lng=en&nrm=iso. doi: 10.1590/S1413-81232007000100009.5. Victora CG, Barros FC. Cohort profile: the 1982Pelotas (Brazil birth cohort study. Int J Epidemiol.2006;35(2:237-42.6. Armenian HK (editor. Applications of the case-controlmethod. Epidemiol Rev. 1994;16:1-164.7. Samet JM, Muñoz A. Evolution of the cohort study.Epidemiol Rev. 1998;20(1:1-14.8. Doll R. Cohort studies: history of the method. II.Retrospective cohort studies. Soz Praventivmed.2001;46(3:152-60. Erratum in: Soz Praventivmed2002;47(2:909. Lima-Costa MF, Barreto SM. Tipos de

  12. A longitudinal study on boys' and girls' career aspirations and interest in technology

    Science.gov (United States)

    Ardies, Jan; De Maeyer, Sven; Gijbels, David

    2015-09-01

    Background: More young people, boys and girls, are needed in technical studies and professions, as the relative number of students in technology-related studies has been decreasing in most industrialised countries. To overcome this decrease several countries implemented mandatory technology classes in the curriculum of secondary education. Purpose: This study has two goals: exploring the evolution of pupils' interest during the year(s) they attend the mandatory technology classes and exploring determining characteristics for differences in boys' and girls' attitude change over time. Sample: This study focuses on data gathered in the first and second grade of the first cycle in general secondary education in the North region of Belgium, Flanders. In a first stage we selected a good representation of geographically spread schools (n = 20), from which over 1300 students participated. Design and methods: A longitudinal study with eight measurement occasions spread over the course of two years is presented in order to capture the evolution of students' attitudes, making use of a multilevel growth model analysis. Results: The results show that students' interest in technology decreases over time, although at the end of each grade interest is increasing again. Boys' and girls' interest in technology also evolves a little different in the first cycle of secondary education. For career aspirations we didn't see any significant difference between boys and girls. Boys' and girls' aspirations decrease over time with a little increase by the end of the second grade. Students with a more technological curriculum also have more career aspirations in the field of technology than their peers with other curricula. Although students' perceptions about technology as a subject for boys and girls are largely stable. Conclusions: The evolution of students' attitude is far from linear, this strengthens us in the choice for a more complex analysis model and the choice for more measuring

  13. Study on the petroleum recovery technology: well testing analysis

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Dae Gee; Kim, Se Joon; Kim, Hyun Tae [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

    1995-12-01

    Well testing is one of the most widely used tools to characterize reservoirs throughout the entire life of petroleum exploration and production. In this study, we first try to set up a procedure of computer aided well test analysis and then attempt to characterize potential reservoirs by performing well test analysis for some of the exploratory wells in the Korean continental shelf. A couple of gas well testing data already published in the literature were also analyzed and compared. First task was to analyze the drill stem test(DST) in KCS-1 gas well. The second analysis was also DST data on multi-rate gas wells. The third case is a Devonian shale reservoir. The final problem is a multi-rate drawdown test without early time pressure data. It is now possible to analyze insufficient well test data with less accuracy. One remark should be pointed out on multi-rate gas well testing. It is recommended to have variable skins rather than a constant skin because rate dependent skins due to turbulence of gas flow must be considered in addition to the mechanical skin. (author). 14 refs.

  14. Genomics technologies to study structural variations in the grapevine genome

    Directory of Open Access Journals (Sweden)

    Cardone Maria Francesca

    2016-01-01

    Full Text Available Grapevine is one of the most important crop plants in the world. Recently there was great expansion of genomics resources about grapevine genome, thus providing increasing efforts for molecular breeding. Current cultivars display a great level of inter-specific differentiation that needs to be investigated to reach a comprehensive understanding of the genetic basis of phenotypic differences, and to find responsible genes selected by cross breeding programs. While there have been significant advances in resolving the pattern and nature of single nucleotide polymorphisms (SNPs on plant genomes, few data are available on copy number variation (CNV. Furthermore association between structural variations and phenotypes has been described in only a few cases. We combined high throughput biotechnologies and bioinformatics tools, to reveal the first inter-varietal atlas of structural variation (SV for the grapevine genome. We sequenced and compared four table grape cultivars with the Pinot noir inbred line PN40024 genome as the reference. We detected roughly 8% of the grapevine genome affected by genomic variations. Taken into account phenotypic differences existing among the studied varieties we performed comparison of SVs among them and the reference and next we performed an in-depth analysis of gene content of polymorphic regions. This allowed us to identify genes showing differences in copy number as putative functional candidates for important traits in grapevine cultivation.

  15. Study on denitration technology of coal char reduction method

    Directory of Open Access Journals (Sweden)

    Wenjie FU

    2016-06-01

    Full Text Available In order to more effectively control NO emissions in coal-fired flue gas, the denitration reaction is carried out with simulated industrial boiler flue gas in a fixed bed reactor. The influence of char types, reaction conditions, the composition of flue gas and other factors on the conversion rate of NO are discussed. The result shows that the industrial semi-coke is the most suitable experimental coal in the three coals studied, and the industrial semi-coke particle size of 0.6 ~ 10 mm is relatively suitable; The conversion rate of NO increases gradually with the increase of temperature, and when the reaction temperature is 700 ℃ and the space velocity is 10 000 h-1, the conversion rate of NO can reach 99%; the conversion rate of NO decreases gradually as airspeed increases, but the airspeed change has no effect on the conversion rate of NO at 700 ℃; under anaerobic conditions,the change of NO concentration has no effect on the conversion rate of NO; at the same temperature, NO conversion rate is higher at the presence of oxygen compared with that at anaerobic situation, and the conversion rate of NO is the highest when O2 concentration is 4%; under aerobic conditions, the concentration change of SO2 and CO2 has no effect on the conversion rate of NO.

  16. An Evaluative Case Study on Professional Competency of Preservice Information Technology Teachers

    Science.gov (United States)

    Kabakci Yurdakul, Isil

    2011-01-01

    The purpose of this study is to evaluate preservice Information Technology (IT) teachers' professional competency in the teaching process. The study was designed on the basis of evaluative case study. The participants of the study consisted of seven preservice IT teachers attending the department of Computer Education and Instructional…

  17. Examining Social Studies and Science and Technology Preservice Teachers' Epistemological Beliefs Regarding Different Variables

    Science.gov (United States)

    Topkaya, Yavuz

    2015-01-01

    The purpose of this study is to determine epistemological beliefs of pre-service teachers who attend social studies and science and technology teaching programs; and to investigate how these beliefs varies regarding grade level, gender and departments. The sample of the study is composed of 300 social studies, 260 science and technology…

  18. A Qualitative Study of Technology-Based Training in Organizations that Hire Agriculture and Life Sciences Students

    Science.gov (United States)

    Bedgood, Leslie; Murphrey, Theresa Pesl; Dooley, Kim E.

    2008-01-01

    Technological advances have created unlimited opportunities in education. Training and technology have merged to create new methods referred to as technology-based training. The purpose of this study was to identify organizations that hire agriculture and life sciences students for positions involving technology-based training and identify…

  19. A Cross-Cultural Comparative Study of Uses and Perceptions of Technology in Education among Turkish and US Undergraduates

    Science.gov (United States)

    Tekinarslan, Erkan; Kennedy, Eugene; Nicolle, Pamela S.

    2015-01-01

    The purpose of this study was to investigate differences and similarities among United States (US) and Turkish university students in technology ownership, uses of technology for academic purposes, perceived importance of technology, and preferences for technology in education. The EDUCAUSE Center for Analytics and Research (ECAR) undergraduate…

  20. THE CLAPHAM SECT LESSON Kanayo N

    African Journals Online (AJOL)

    Dean SPGS NAU

    It is now history that the 18th century Europe witnesses a rise in the ... people of different categories to be passionately and emotionally .... British North America had carried on, as far as ... Leadership is lifting of man's vision to higher sights, the raising of ... enduring values especially among the defenseless in our society. It.

  1. A cultural study of a science classroom and graphing calculator-based technology

    Science.gov (United States)

    Casey, Dennis Alan

    Social, political, and technological events of the past two decades have had considerable bearing on science education. While sociological studies of scientists at work have seriously questioned traditional histories of science, national and state educational systemic reform initiatives have been enacted, stressing standards and accountability. Recently, powerful instructional technologies have become part of the landscape of the classroom. One example, graphing calculator-based technology, has found its way from commercial and domestic applications into the pedagogy of science and math education. The purpose of this study was to investigate the culture of an "alternative" science classroom and how it functions with graphing calculator-based technology. Using ethnographic methods, a case study of one secondary, team-taught, Environmental/Physical Science (EPS) classroom was conducted. Nearly half of the 23 students were identified as students with special education needs. Over a four-month period, field data was gathered from written observations, videotaped interactions, audio taped interviews, and document analyses to determine how technology was used and what meaning it had for the participants. Analysis indicated that the technology helped to keep students from getting frustrated with handling data and graphs. In a relatively short period of time, students were able to gather data, produce graphs, and to use inscriptions in meaningful classroom discussions. In addition, teachers used the technology as a means to involve and motivate students to want to learn science. By employing pedagogical skills and by utilizing a technology that might not otherwise be readily available to these students, an environment of appreciation, trust, and respect was fostered. Further, the use of technology by these teachers served to expand students' social capital---the benefits that come from an individual's social contacts, social skills, and social resources.

  2. Nuclear technology and chronic diseases: an exploratory study evolving the clinical physician perception

    International Nuclear Information System (INIS)

    Sato, Renato Cesar

    2010-01-01

    This research is an exploratory cross-sectional study about the relationship of chronic disease and the use of nuclear technology. There is a concern over the increase of the prevalence of chronic disease in developing countries and it should hence be carefully evaluated in the context of societies, organizations and individuals. The technological advances experienced in the last decades especially in the nuclear technology area have created expectations to deal more efficiently with the challenge of chronic diseases. However little has been explored in this area under the point-of-view of medical doctors as agents who make this system of relations between disease and technology. The necessity for public and private planning to deal with this set of problems can benefit through an initial evaluation about the forthcoming theme, but should incorporate the agenda of health and technology planning for the following years. Using mixed methodology, made up of qualitative and quantitative approach, this research sought to reveal and configure important dimensions around the theme of this study. The field research was made up of interviews analyzed using techniques of fundamental theory and also of questionnaires sent by web analyzed statistically using exploratory factor analysis. These ventures allowed dimensions to be revealed that make up the perception of chronic disease and the use of nuclear technology. These dimensions presented in a form of a theoretical construct that were then discussed under the point of view of social theory and technological innovation. (author)

  3. Interorganizational transfer of technology - A study of adoption of NASA innovations

    Science.gov (United States)

    Chakrabarti, A. K.; Rubenstein, A. H.

    1976-01-01

    The paper describes a study on the effects of top management support, various techno-economic factors, organizational climate, and decision-making modes on the adoption of NASA innovations. Field research consisted of interviews and questionnaires directed to sixty-five organizations. Forty-five test cases where different decisions for adoption of ideas for new products or processes were made on NASA Tech Briefs were studied in relation to the effects of various factors on the degree of success of adoption, including: (1) the degree of general connection of the technology to the firm's existing operation, (2) the specificity of the relationship between the technology and some existing and recognized problem, (3) the degree of urgency of the problem to which the technology was related, (4) maturity of technology available to implement the technology, (5) availability of personnel and financial resources to implement the technology, (6) degree of top management interest, (7) the use of confrontation in joint-decision, (8) the use of smoothing in decision-making, and (9) the use of forcing in decision-making. It was found that top managements interest was important in the product cases only, and that the success of process innovations was dependent on the quality of information and the specificity of the relationship between the technology and some recognized existing problem.

  4. Factors related to the implementation and diffusion of new technologies: a pilot study

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    In order to develop an understanding of how government intervention affects the processes of implementation and diffusion of new technologies, case studies of 14 technologies were carried out: automobiles; broadcast radio; frozen foods; black and white TV; color TV; polio vaccine; supersonic transport; fluoridation of water supplies; computer-aided instruction; basic oxygen process for steel; numerical control in manufacturing; digital computers; lasers; and integrated circuit. The key factors, their motivations for implementing/adopting the technology (or not doing so), the interactions among the key factors, and how these affected implementation/adoption are examined.

  5. Informing international UNFCCC technology mechanisms from the ground up: Using biogas technology in South Africa as a case study to evaluate the usefulness of potential elements of an international technology agreement in the UNFCCC negotiations process

    International Nuclear Information System (INIS)

    Boyd, Anya

    2012-01-01

    Transfer of low carbon technologies to developing countries is 1 approach for tackling rising global emissions. An international technology transfer mechanism has been proposed under the UNFCCC; however, it remains unclear how this international mechanism would translate into local level technology implementation. This study uses biogas technology in South Africa to obtain empirical data inductively related to technology transfer. Observations and activities specific to the biogas sector in South Africa are put forward based on site visits and stakeholder discussions in South Africa, the UK, Germany and Sweden. This paper presents empirical findings on technology transfer in the biogas sector in South Africa and analyses the role of an international technology mechanism in supporting the uptake of biogas. Many of the barriers to biogas technology in South Africa are national level constraints such as lack of supportive policy environment, financial incentives and information sharing. This case study supports the argument that it will be unrealistic for international technology mechanisms to capture the necessary specificities of individual technologies at a country level. Therefore, as demonstrated through the example of biogas technology in South Africa, there is a need for both effective national and international engagement to support technology implementation. - Highlights: ► The UNFCCC technology mechanism aims to increase low carbon technology deployment. ► The interface of global technology frameworks and national implementation is unclear. ► Biogas is a widely used technology yet its uptake in South Africa (SA) is minimal. ► Empirical data is gathered from biogas sites in SA, UK, Germany and Sweden. ► Findings show biogas uptake in SA requires national and international support

  6. Accessing best practice resources using mobile technology in an undergraduate nursing program: a feasibility study.

    Science.gov (United States)

    Mann, Elizabeth G; Medves, Jennifer; Vandenkerkhof, Elizabeth G

    2015-03-01

    Mobile technology presents new opportunities for nursing education and ultimately the provision of nursing care. The aim of this study was to explore the utility of mobile technology in undergraduate nursing education. In this evaluation study, undergraduate nursing students were provided with iPod Touch devices containing best practice guidelines. Computer self-efficacy was assessed, and the Theory of Planned Behavior was used to identify potential predictors of the use of mobile technology. Questionnaires were completed at baseline (n = 33) and postimplementation (n = 23). Feedback on feasibility issues was recorded throughout the study period. Students generally found the devices useful, and few technical problems were identified; however, lack of skill in using the devices and lack of support from staff in the clinical setting were commonly identified issues. Self-efficacy scores were high throughout the study. Attitudes, perceptions of the desirability of use, perceived personal control over use, and intentions of using the device were lower postimplementation than at baseline. Attitude toward the technology predicted intention to use the device after graduation. Mobile technology may promote evidence-informed practice; however, supporting students' acquisition of related skills may optimize use. Successful integration of mobile technology into practice requires attention to factors that affect student attitudes.

  7. A mixed methods study of foreign language teachers implementing technology-enhanced multimedia instructio

    Directory of Open Access Journals (Sweden)

    Olha Ketsman

    2014-08-01

    Full Text Available Technology-enhanced multimedia instruction offers benefits for foreign language learners. Despite having much potential, technology itself is neither effective or nor effective, but teachers play a key role in determining its effectiveness because they are in charge of making instructional decisions and choose whether and how to use technology. This article fills a gap in the literature by reporting findings of a mixed methods study of technology- enhanced multimedia instruction in middle and high school foreign language classrooms. Convergent parallel mixed methods design was applied in this study and data was collected through quantitative survey and qualitative semi-structured interviews with teachers. Results from the study indicated a significant positive correlation between variables that contribute to the use of technology-enhanced multimedia instruction in foreign language classrooms and described effective technology-enhanced multimedia practices. The findings of the study have implications for teachers, administrators and faculty of teacher preparation programs as well as state teacher education policy makers.

  8. Factors affecting the educational achievement of mature Māori information technology students: A case study

    Directory of Open Access Journals (Sweden)

    Blain Harre Rakena

    Full Text Available This paper reports on the results of an investigation into the experiences of academically successful adult Māori students undertaking the Bachelor of Information Technology (BIT programme at the Waikato Institute of Technology (Wintec. This research looked at the participants\\' motivation for attending Wintec, the barriers (such as financial, social and family hardships they encountered as they made the transition back to full time study, and their experiences at Wintec. The paper considers the reasons why the participants have achieved well, identifies the support systems they called on, and explores the challenges that they experienced while studying in a tertiary learning environment. Its significance lies in the focus on factors that affect Māori academic success, specifically in information technology, so that teaching approaches and support systems, particularly in the institute of technology and polytechnic (ITP sector, can enhance the success of Māori in the field of IT.

  9. Foresight Study on the Risk Governance of New Technologies: The Case of Nanotechnology.

    Science.gov (United States)

    Read, Sheona A K; Kass, Gary S; Sutcliffe, Hilary R; Hankin, Steven M

    2016-05-01

    Technology-led innovation represents an important driver of European economic and industrial competitiveness and offers solutions to societal challenges. In order to facilitate responsible innovation and public acceptance, a need exists to identify and implement oversight approaches focused on the effective risk governance of emerging technologies. This article describes a foresight study on the governance of new technologies, using nanotechnology as a case example. Following a mapping of the governance landscape, four plausible foresight scenarios were developed, capturing critical uncertainties for nanotechnology governance. Key governance elements were then stress tested within these scenarios to see how well they might perform in a range of possible futures and to inform identification of the strengths, weaknesses, opportunities, and threats for nanotechnology governance in Europe. Based on the study outcomes, recommendations are proposed regarding the development of governance associated with the responsible development of new technologies. © 2015 Society for Risk Analysis.

  10. STUDYING TECHNOLOGIES FOR CREATING ELECTRONIC TERMINOLOGICAL BASES IN THE PROCESS OF PROFESSIONAL TRAINING OF TRANSLATORS

    Directory of Open Access Journals (Sweden)

    Svitlana M. Amelina

    2017-09-01

    Full Text Available The article deals with the peculiarities of studying the technologies of creating electronic terminology databases at different stages of professional training of future translators in accordance with the level of their information competence. The issues of studying terminology management in foreign universities are considered. It is clarified that the ability to create and to use terminology databases is included in the curricula of disciplines on translation practice and translation technologies. There are various ways of creating terminological databases depending on their structure and technology. It is accentuated on mastering the technology of forming terminology databases by extracting terms from specialized texts. It is noted that the accumulation of own terminological resources makes it possible to use them in high-tech translation systems.

  11. Transfer of technology in the French-Iranian study for a nuclear research center in Iran

    International Nuclear Information System (INIS)

    Teillac, J.

    1977-01-01

    Economic wealth is the result of the three factors: natural resources, human work and technological know-how; the last being essential to make full use of the first two. The transfer of technology is not only a matter of training engineers or technicians but of creating a real network of knowledge and abilities so that the technologies can be fully assimilated and used according to the specific goals of the country, so a basic nuclear education is absolutely necessary, so the operation of a raining and research centre is essential. For this reason the CEA and its subsidary Technicatome have undertaken the study and construction of the Esfahan Nuclear Technology Centre (ENTEC). The main objectives of this centre are: the nuclear reactors, the study of nuclear fuels and industrial applications

  12. Citizen Management of Technology: A Science and Technology Studies approach to wireless networks and urban governance trough guifi.net

    Directory of Open Access Journals (Sweden)

    Yann Bona Beauvois

    2011-03-01

    Full Text Available Thesis presented at the Departament de Psicologia Social de la UAB by Yann Bona on December, 2010. Directed by Dr. Joan Pujol Tarrés.This dissertation explores the many ways in which citizens aiming to manage technologies in urban scape relate to public administrations. To accomplish it's task, it brings forward certain STS notions such as cosmopolitics, hybrid composition or technical democracy. On a general level, this thesis seeks an answer to Bruno Latour concern with what does it mean to conceive the technical as political?. We offer a set of conclusions based on what we choose to name a Sociotechnique of Public Policy .Our work relies on a case study focused on a free and open wireless network (located in Catalunya for the most part and called guifi.net that emerged from the desire and will of Civil Society wich, up to date, turns out to be the world's biggest free wireless network.

  13. Perspectives of Family Members on Using Technology in Youth Mental Health Care: A Qualitative Study.

    Science.gov (United States)

    Lal, Shalini; Daniel, Winnie; Rivard, Lysanne

    2017-06-23

    Information and communication technologies (ICTs) are increasingly recognized as having an important role in the delivery of mental health services for youth. Recent studies have evaluated young people's access and use of technology, as well as their perspectives on using technology to receive mental health information, services, and support; however, limited attention has been given to the perspectives of family members in this regard. The aim of this study was to explore the perspectives of family members on the use of ICTs to deliver mental health services to youth within the context of specialized early intervention for a first-episode psychosis (FEP). Six focus groups were conducted with family members recruited from an early intervention program for psychosis. Twelve family members participated in the study (target sample was 12-18, and recruitment efforts took place over the duration of 1 year). A 12-item semistructured focus group guide was developed to explore past experiences of technology and recommendations for the use of technology in youth mental health service delivery. A qualitative thematic analysis guided the identification and organization of common themes and patterns identified across the dataset. Findings were organized by the following themes: access and use of technology, potential negative impacts of technology on youth in recovery, potential benefits of using technology to deliver mental health services to youth, and recommendations to use technology for (1) providing quality information in a manner that is accessible to individuals of diverse socioeconomic backgrounds, (2) facilitating communication with health care professionals and services, and (3) increasing access to peer support. To our knowledge, this is among the first (or the first) to explore the perspectives of family members of youth being treated for FEP on the use of technology for mental health care. Our results highlight the importance of considering diverse experiences

  14. Technological Health Intervention in Population Aging to Assist People to Work Smarter not Harder: Qualitative Study

    OpenAIRE

    Chen, Sonia Chien-I

    2018-01-01

    Background Technology-based health care has been promoted as an effective tool to enable clinicians to work smarter. However, some health stakeholders believe technology will compel users to work harder by creating extra work. Objective The objective of this study was to investigate how and why electronic health (eHealth) has been applied in Taiwan and to suggest implications that may inspire other countries facing similar challenges. Methods A qualitative methodology was adopted to obtain in...

  15. The use of QR Code as a learning technology: an exploratory study

    Directory of Open Access Journals (Sweden)

    Stefano Besana

    2010-12-01

    Full Text Available This paper discusses a pilot study on the potential benefits of QR (Quick Response Codes as a tool for facilitating and enhancing learning processes. An analysis is given of the strengths and added value of QR technologies applied to museum visits, with precautions regarding the design of learning environments like the one presented. Some possible future scenarios are identified for implementing these technologies in contexts more strictly related to teaching and education.

  16. Economic Feasibility Study for Using Irradiation Technology in Preservation of Animalism Foods

    International Nuclear Information System (INIS)

    El Gameel, E.A.

    2011-01-01

    The present study discus the economic feasibility for the preservation animalism foods by using irradiation technology. This study has included the technical data, regression foretelling for the throughput, determination of irradiators types and radiation sources activity. This study comprises the financial analysis for the establishment animalism foods irradiation facilities (types: tote box, pallet conveyor) and the national return

  17. A Sample Application for Use of Biography in Social Studies; Science, Technology and Social Change Course

    Science.gov (United States)

    Er, Harun

    2017-01-01

    The aim of this study is to evaluate the opinions of social studies teacher candidates on use of biography in science, technology and social change course given in the undergraduate program of social studies education. In this regard, convergent parallel design as a mixed research pattern was used to make use of both qualitative and quantitative…

  18. Jordanian Social Studies Teachers' Perceptions of Competency Needed for Implementing Technology in the Classroom

    Science.gov (United States)

    Al Bataineh, Mohammad; Anderson, Sharon

    2015-01-01

    This study used a cross-sectional, ten-point Likert-type scale survey design, to examine the perception of Jordanian seventh to twelfth-grade social studies teachers of the competency needed for technology implementation in their classrooms. The instrument for this study was a modified version of a survey developed by Kelly (2003) called the…

  19. Perceptions of Teachers about Information and Communication Technologies (ICT): A Study of Metaphor Analysis

    Science.gov (United States)

    Bas, Gokhan

    2017-01-01

    This study aimed to examine metaphorical conceptions of high school teachers (n = 224) in Turkey about information and communication technologies (ICT). Phenomenological research design was adopted to examine teachers' perceptions about ICT in the current study. The results of the study showed that teachers produced a total of 46 valid metaphors…

  20. Determinants of the Use of Technological Innovation in Distance Learning: A Study with Business School Instructors

    Science.gov (United States)

    Araujo Leal, Edvalda; Luiz Albertin, Alberto

    2015-01-01

    This study's overall purpose is to identify the factors determining the use of technological innovation in Distance Learning (DL), as perceived by instructors of Business Education programs. The theoretical basis for the study is the Innovation Diffusion Theory (IDT). The study's sample is made up of 436 instructors; we used a quantitative…

  1. A Study of Thermal Performance of Contemporary Technology-Rich Educational Spaces

    Directory of Open Access Journals (Sweden)

    Sarah Elmasry

    2013-08-01

    Full Text Available One of the most dominant features of a classroom space is its high occupancy, which results in high internal heat gain (approximately 5 KW. Furthermore, installation of educational technologies, such as smart boards, projectors and computers in the spaces increases potential internal heat gain. Previous studies on office buildings indicate that with the introduction of IT equipment in spaces during the last decade, cooling load demands are increasing with an associated increase in summer electrical demand. Due to the fact that educational technologies in specific correspond to pedagogical practices within the space, a lot of variations due to occupancy patterns occur. Also, thermal loads caused by educational technologies are expected to be dependent on spatial configuration, for example, position with respect to the external walls, lighting equipment, mobility of devices. This study explores the thermal impact of educational technologies in 2 typical educational spaces in a facility of higher education; the classroom and the computer lab. The results indicate that a heat gain ranging between 0.06 and 0.095 KWh/m2 is generated in the rooms when educational technologies are in use. The second phase of this study is ongoing, and investigates thermal zones within the rooms due to distribution of educational technologies. Through simulation of thermal performance of the rooms, alternative room configurations are thus recommended in response to the observed thermal zones.

  2. ALTERNATIVE REMEDIATION TECHNOLOGY STUDY FOR GROUNDWATER TREATMENT AT 200-PO-1 OPERABLE UNIT AT HANFORD SITE

    Energy Technology Data Exchange (ETDEWEB)

    DADO MA

    2008-07-31

    This study focuses on the remediation methods and technologies applicable for use at 200-PO-I Groundwater Operable Unit (OU) at the Hanford Site. The 200-PO-I Groundwater au requires groundwater remediation because of the existence of contaminants of potential concern (COPC). A screening was conducted on alternative technologies and methods of remediation to determine which show the most potential for remediation of groundwater contaminants. The possible technologies were screened to determine which would be suggested for further study and which were not applicable for groundwater remediation. COPCs determined by the Hanford Site groundwater monitoring were grouped into categories based on properties linking them by remediation methods applicable to each COPC group. The screening considered the following criteria. (1) Determine if the suggested method or technology can be used for the specific contaminants found in groundwater and if the technology can be applied at the 200-PO-I Groundwater au, based on physical characteristics such as geology and depth to groundwater. (2) Evaluate screened technologies based on testing and development stages, effectiveness, implementability, cost, and time. This report documents the results of an intern research project conducted by Mathew Dado for Central Plateau Remediation in the Soil and Groundwater Remediation Project. The study was conducted under the technical supervision of Gloria Cummins and management supervision of Theresa Bergman and Becky Austin.

  3. The acceptance of green technology: A case study in Sabah Development Corridor

    Science.gov (United States)

    Jainudin, Noor Azland; Jugah, Ivy; Ali, Awang Nasrizal Awang; Tawie, Rudy

    2017-08-01

    Green technology is the development and application of products, equipment and systems used to conserve the environment which minimizes the negative impact from human activities. The technology can be in the form of green buildings or renewable energy such as hydro, solar and biogas. Development in SDC is still at the early stage, hence there is a prospect to plan for proper green concept implementation. With the increasing number of construction projects particularly in the rapid developing city of Kota Kinabalu, green technology as a whole is becoming more significant as it helps to develop effective solutions to encounter global environmental issues. Although there has been lengthy discussion on the green technology, the visibility of the implementation is still yet to be seen widely in Kota Kinabalu. The implementation of green technology in construction will support dynamic growth of economic development activities, while improving the environment. Hence, it is important to develop a strategic plan to promote the use of green technology while the areas are still developing. The focus of this correlative-based approach study is to investigate the perception and implementation of green technology in Kota Kinabalu from the industrial perspectives.

  4. Mobile Data Technologies and SME Adoption and Diffusion: an empirical study of barriers and facillitators

    Directory of Open Access Journals (Sweden)

    Jeanette Van Akkeren

    2002-05-01

    Full Text Available The technological environment in which Australian SMEs operate can be best described as dynamic and vital. The rate of technological change provides the SME owner/manger a complex and challenging operational context. Wireless applications are being developed that provide mobile devices with Internet content and E-business services. In Australia, the adoption of ecommerce by large organisations has been relatively high, however, the same cannot be said for SMEs, where adoption has been slower than other developed countries. In contrast, however, mobile telephone adoption and diffusion is relatively high by SMEs. Will SMEs who have been reluctant to adopt commerce technologies in the past be more ready to go on-line with the merging of the Internet and mobile data technologies? This exploratory study identifies attitudes, perceptions and issues for mobile data technologies by regional SME owner/managers across a range of industry sectors. The major issues include the sector the firm belongs to, the current adoption status of the firm, the level of mistrust of the IT industry, the cost of the technologies, and the applications and attributes of the technologies.

  5. Barriers to using consumer science information in food technology innovations: An exploratory study using Delphi methodology

    Directory of Open Access Journals (Sweden)

    Marian E. Raley

    2016-04-01

    Full Text Available Food technology innovation has the potential to deliver many benefits to society, although some technologies have been problematic in terms of public acceptance. In promoting the commercial success of innovative technological processes and resultant products it will be important to incorporate information relating to consumer preferences and concerns during their development. The barriers to the utilisation of consumer information during technological development was explored using a two round Delphi study involving 75 experts with an interest in new food technology (food technologists and consumer scientists. There was overall agreement that consumer information should be used in technology implementation and product design, and that good communication between key actors at pivotal stages during the development of new food technologies and products was important. However disciplinary differences were perceived to be a barrier to communication, as were difficulties associated with producing consumer information usable by food technologists. A strategy to improve inter-disciplinary communication is proposed, involving the creation of multi-disciplinary teams working together throughout the development project’s duration, including those with interdisciplinary experience. Deficiencies in the specification of the information required from consumer scientists need to be overcome. Consumer science results need to be concrete and presented as salient to and usable by food technologists.

  6. An Orchestrating Evaluation of Complex Educational Technologies: a Case Study of a CSCL System

    Directory of Open Access Journals (Sweden)

    Luis P. Prieto

    2014-06-01

    Full Text Available As digital technologies permeate every aspect of our lives, the complexity of the educational settings, and of the technological support we use within them, unceasingly rises. This increased complexity, along with the need for educational practitioners to apply such technologies within multi-constraint authentic settings, has given rise to the notion of technology-enhanced learning practice as “orchestration of learning”. However, at the same time, the complexity involved in evaluating the benefits of such educational technologies has also increased, prompting questions about the way evaluators can cope with the different places, technologies, informants and issues involved in their evaluation activity. By proposing the notion of “orchestrating evaluation”, this paper tries to reconcile the often disparate “front office accounts” of research publications and the “shop floor practice” of evaluation of educational technology, through the case study of evaluating a system to help teachers in coordinating computer-supported collaborative learning (CSCL scenarios. We reuse an internationally-evaluated conceptual framework of “orchestration aspects” (design, management, adaptation, pragmatism, etc. to structure the case‟s narrative, showing how the original evaluation questions and methods were modulated in the face of the multiple (authentic evaluation setting constraints.

  7. Mobile Technology Use Across Age Groups in Patients Eligible for Cardiac Rehabilitation: Survey Study.

    Science.gov (United States)

    Gallagher, Robyn; Roach, Kellie; Sadler, Leonie; Glinatsis, Helen; Belshaw, Julie; Kirkness, Ann; Zhang, Ling; Gallagher, Patrick; Paull, Glenn; Gao, Yan; Partridge, Stephanie Ruth; Parker, Helen; Neubeck, Lis

    2017-10-24

    Emerging evidence indicates mobile technology-based strategies may improve access to secondary prevention and reduce risk factors in cardiac patients. However, little is known about cardiac patients' use of mobile technology, particularly for health reasons and whether the usage varies across patient demographics. This study aimed to describe cardiac patients' use of mobile technology and to determine variations between age groups after adjusting for education, employment, and confidence with using mobile technology. Cardiac patients eligible for attending cardiac rehabilitation were recruited from 9 hospital and community sites across metropolitan and rural settings in New South Wales, Australia. Participants completed a survey on the use of mobile technology devices, features used, confidence with using mobile technology, willingness and interest in learning, and health-related use. The sample (N=282) had a mean age of 66.5 (standard deviation [SD] 10.6) years, 71.9% (203/282) were male, and 79.0% (223/282) lived in a metropolitan area. The most common diagnoses were percutaneous coronary intervention (33.3%, 94/282) and myocardial infarction (22.7%, 64/282). The majority (91.1%, 257/282) used at least one type of technology device, 70.9% (200/282) used mobile technology (mobile phone/tablet), and 31.9% (90/282) used all types. Technology was used by 54.6% (154/282) for health purposes, most often to access information on health conditions (41.4%, 117/282) and medications (34.8%, 98/282). Age had an important independent association with the use of mobile technology after adjusting for education, employment, and confidence. The youngest group (mobile technology than the oldest (>69 years) age group (odds ratio [OR] 4.45, 95% CI 1.46-13.55), 5 times more likely to use mobile apps (OR 5.00, 95% CI 2.01-12.44), and 3 times more likely to use technology for health-related reasons (OR 3.31, 95% CI 1.34-8.18). Compared with the older group, the middle age group (56

  8. Determining student teachers' perceptions on using technology via Likert scale, visual association test and metaphors: A mixed study

    Directory of Open Access Journals (Sweden)

    Mevhibe Kobak

    2013-04-01

    Full Text Available The aim of this study is to determine senior student teachers’ perceptions on using technology by approaching various points of view. In this study, researchers collected data through Technology Perceptions Scale, Visual Association Activity and Technology Metaphors. The participants of the study were 104 senior student teachers who were enrolled in Balıkesir University Necatibey Faculty of Education. In this descriptive study, researchers interpreted qualitative data in conjunction with quantitative data. Based on the data obtained, even though student teachers’ perceptions on using technology were found positive in the light of Likert scale, there was no significant relation in terms of gender and enrolled undergraduate program. According to the results of visual association test, student teachers ranked smartboard, Internet and computer in the first three, and portable media player, mobile phone and video/camera in the last three. Besides, researchers analyzed and classified student teachers’ metaphors about technology under 9 categories: 1developing-changing technology, 2rapidly progressing technology, 3 limitless-endless technology, 4beneficial technology, 5harmful technology, 6both beneficial and harmful technology, 7indispensible technology, 8technology as a necessity, 9 all-inclusive technology. At the end of the study, those nine categories which were acquired using the content analysis technique are presented in a table which shows the interaction between categories in a holistic view.

  9. Commentary: Science, Technology, and Society in Guidelines for Using Technology to Prepare Social Studies Teachers--A Reply to Hicks et al. and Crocco and Leo

    Science.gov (United States)

    Mason, Lance

    2015-01-01

    This essay is a response to both the "Guidelines for Using Technology to Prepare Social Studies Teachers" published in this journal by Hicks, Lee, Berson, Bolick, and Diem (2014) and the rejoinder by Crocco and Leo (2015). The author agrees with Crocco and Leo's assessment that removing the principal regarding science, technology, and…

  10. Towards a Differentiated and Domain-Specific View of Educational Technology: An Exploratory Study of History Teachers' Technology Use

    Science.gov (United States)

    Voet, Michiel; De Wever, Bram

    2017-01-01

    Adopting a differentiated and domain-specific view of educational technology, the present study focuses on the case of school history. It argues that, in this particular context, one of technology's main assets is its ability to support inquiry-based learning activities, during which students interpret the past through historical reasoning. As…

  11. Has Technology Become a Need? A Qualitative Study Exploring Three Generational Cohorts' Perception of Technology in Regards to Maslow's Hierarchy of Needs

    Science.gov (United States)

    Dunmore, Denisia

    2013-01-01

    For the first time in the history of America, there are four different generations living, working and learning together in a society that is more technologically advanced than ever before. However, could it be that technology has become a need? The primary purpose of this qualitative case study was to utilize Maslow's hierarchy of needs as the…

  12. Technological Health Intervention in Population Aging to Assist People to Work Smarter not Harder: Qualitative Study.

    Science.gov (United States)

    Chen, Sonia Chien-I

    2018-01-04

    Technology-based health care has been promoted as an effective tool to enable clinicians to work smarter. However, some health stakeholders believe technology will compel users to work harder by creating extra work. The objective of this study was to investigate how and why electronic health (eHealth) has been applied in Taiwan and to suggest implications that may inspire other countries facing similar challenges. A qualitative methodology was adopted to obtain insightful inputs from deeper probing. Taiwan was selected as a typical case study, given its aging population, advanced technology, and comprehensive health care system. This study investigated 38 stakeholders in the health care ecosystem through in-depth interviews and focus groups, which provides an open, flexible, and enlightening way to study complex, dynamic, and interactive situations through informal conversation or a more structured, directed discussion. First, respondents indicated that the use of technology can enable seamless patient care and clinical benefits such as flexibility in time management. Second, the results suggested that a leader's vision, authority, and management skills might influence success in health care innovation. Finally, the results implied that both internal and external organizational governance are highly relevant for implementing technology-based innovation in health care. This study provided Taiwanese perspectives on how to intelligently use technology to benefit health care and debated the perception that technology prevents human interaction between clinicians and patients. ©Sonia Chien-I Chen. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 04.01.2018.

  13. Information data systems for a global change technology initiative architecture trade study

    Science.gov (United States)

    Murray, Nicholas D.

    1991-01-01

    The Global Change Technology Initiative (GCTI) was established to develop technology which will enable use of satellite systems of Earth observations on a global scale, enable use of the observations to predictively model Earth's changes, and provide scientists, government, business, and industry with quick access to the resulting information. At LaRC, a GCTI Architecture Trade Study was undertaken to develop and evaluate the architectural implications to meet the requirements of the global change studies and the eventual implementation of a global change system. The output of the trade study are recommended technologies for the GCTI. That portion of the study concerned with the information data system is documented. The information data system for an earth global change modeling system can be very extensive and beyond affordability in terms of today's costs. Therefore, an incremental approach to gaining a system is most likely. An options approach to levels of capability versus needed technologies was developed. The primary drivers of the requirements for the information data system evaluation were the needed science products, the science measurements, the spacecraft orbits, the instruments configurations, and the spacecraft configurations and their attendant architectures. The science products requirements were not studied here; however, some consideration of the product needs were included in the evaluation results. The information data system technology items were identified from the viewpoint of the desirable overall information system characteristics.

  14. Small Engine Technology (SET) Task 24 Business and Regional Aircraft System Studies

    Science.gov (United States)

    Lieber, Lysbeth

    2003-01-01

    This final report has been prepared by Honeywell Engines & Systems, Phoenix, Arizona, a unit of Honeywell International Inc., documenting work performed during the period June 1999 through December 1999 for the National Aeronautics and Space Administration (NASA) Glenn Research Center, Cleveland, Ohio, under the Small Engine Technology (SET) Program, Contract No. NAS3-27483, Task Order 24, Business and Regional Aircraft System Studies. The work performed under SET Task 24 consisted of evaluating the noise reduction benefits compared to the baseline noise levels of representative 1992 technology aircraft, obtained by applying different combinations of noise reduction technologies to five business and regional aircraft configurations. This report focuses on the selection of the aircraft configurations and noise reduction technologies, the prediction of noise levels for those aircraft, and the comparison of the noise levels with those of the baseline aircraft.

  15. AN ACTIVITY THEORY APPROACH TO STUDY BARRIERS OF FACULTY REGARDING TECHNOLOGY INTEGRATION IN HIGHER EDUCATION

    DEFF Research Database (Denmark)

    Castro Guzman, Willy

    2016-01-01

    technology. Ertmer’s approach establishes first-order and second-orders barriers as hinderers for teacher’s adoption of technology. The study intends to answer what are the barriers existing in the socalled enthusiastic faculty teachers regarding technology integration in Education? Findings call...... dichotomies between enthusiastic-resistant teachers, the intrinsic-extrinsic barriers, and claims for passing from an individual to a collective approach to ICT integration in education......Information and communication technologies are instruments for supporting new ways of teaching and learning. Nevertheless, its impact concerning scope has not reached the expected level. This strain between benefits and impact has been inquired from the perspective of barriers of teachers to use...

  16. Adolescents' Depressive Symptoms and Subsequent Technology-Based Interpersonal Behaviors: A Multi-Wave Study.

    Science.gov (United States)

    Nesi, Jacqueline; Miller, Adam B; Prinstein, Mitchell J

    2017-07-01

    This study examined the longitudinal effects of adolescents' depressive symptoms on engagement in technology-based social comparison and feedback seeking (SCFS) behaviors. A total of 816 adolescents (54.7% girls; M age =14.1 at Time 1) participated at three times points, each one year apart. Adolescents reported technology-based SCFS, depressive symptoms, and frequencies of technology use (cell phones, Facebook, and Instagram). Multiple group (by gender) latent growth curve models examined concurrent and lagged effects of depressive symptoms on SCFS, controlling for adolescent's underlying trajectories of SCFS and overall frequencies of technology use. Results indicated that higher levels of depressive symptoms were concurrently associated with greater SCFS after accounting for adolescents' typical patterns of SCFS. For boys only, higher depressive symptoms were prospectively associated with later increases in SCFS. Results highlight the importance of social media as a unique context in which depressed adolescents may be at risk for maladaptive interpersonal behavior.

  17. Explaining experience curves for new energy technologies. A case study of liquefied natural gas

    International Nuclear Information System (INIS)

    Greaker, Mads; Lund Sagen, Eirik

    2008-01-01

    Many new energy technologies seem to experience a fall in unit price as they mature. In this paper we study the unit price of liquefying natural gas in order to make it transportable by ship to gas power installations all over the world. Our point of departure is the experience curve approach, however unlike many other studies of new energy technologies, we also seek to account for autonomous technological change, scale effects and the effects of upstream competition among technology suppliers. To our surprise we find that upstream competition is by far the most important factor contributing to the fall in unit price. With respect to the natural gas business, this may have implications for the future development in prices as the effect of increased upstream competition is temporary and likely to weaken a lot sooner than effects from learning and technological change. Another more general policy implication, is that while promoting new energy technologies, governments must not forget to pay attention to competition policy. (author)

  18. Critical thinking instruction and technology enhanced learning from the student perspective: A mixed methods research study.

    Science.gov (United States)

    Swart, Ruth

    2017-03-01

    Critical thinking is acclaimed as a valuable asset for graduates from higher education programs. Technology has advanced in quantity and quality; recognized as a requirement of 21st century learners. A mixed methods research study was undertaken, examining undergraduate nursing student engagement with critical thinking instruction, platformed on two technology-enhanced learning environments: a classroom response system face-to-face in-class and an online discussion forum out-of-class. The Community of Inquiry framed the study capturing constructivist collaborative inquiry to support learning, and facilitate critical thinking capability. Inclusion of quantitative and qualitative data sources aimed to gather a comprehensive understanding of students' development of critical thinking and engagement with technology-enhanced learning. The findings from the students' perspectives were positive toward the inclusion of technology-enhanced learning, and use in supporting their development of critical thinking. Students considered the use of two forms of technology beneficial in meeting different needs and preferences, offering varied means to actively participate in learning. They valued critical thinking instruction being intentionally aligned with subject-specific content facilitating understanding, application, and relevance of course material. While the findings are limited to student participants, the instructional strategies and technology-enhanced learning identified as beneficial can inform course design for the development of critical thinking. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Thermal treatment technology study and data base for Department of Energy mixed waste

    International Nuclear Information System (INIS)

    Gillins, R.L.; Steverson, E.M.; Balo, K.A.

    1991-01-01

    The Department of Energy (DOE) has a wide variety of waste streams that must be treated to meet various regulations before final disposal. One category of technologies for treating many of these waste streams is thermal treatment. A study of known thermal treatment technologies was conducted to aid DOE in the development of strategies to meet its waste management needs. The study was specifically addressed to mixed waste, but it is also applicable to hazardous and radioactive wastes. The data collected in the study, along with other waste management data, are being included in a comprehensive data base that DOE is developing. 3 refs., 1 fig

  20. A Study of Future Communications Concepts and Technologies for the National Airspace System - Part II

    Science.gov (United States)

    Ponchak, Denise S.; Apaza, Rafael D.; Haynes, Brian; Wichgers, Joel M.; Roy, Aloke

    2014-01-01

    The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is investigating current and anticipated wireless communications concepts and technologies that the National Airspace System (NAS) may need in the next 50 years. NASA has awarded three NASA Research Announcements (NAR) studies with the objective to determine the most promising candidate technologies for air-to-air and air-to-ground data exchange and analyze their suitability in a post-NextGen NAS environment. This paper will present progress made in the studies and describe the communications challenges and opportunities that have been identified during the studies' first year.