WorldWideScience

Sample records for technology related field

  1. Reviewing the relations between teachers' knowledge and pupils' attitude in the field of primary technology education

    NARCIS (Netherlands)

    Ruurd Taconis; dr. Ellen J. J Rohaan; Wim Jochems

    2010-01-01

    This literature review reports on the assumed relations between primary school teachers' knowledge of technology and pupils' attitude towards technology. In order to find relevant aspects of technology-specific teacher knowledge, scientific literature in the field of primary technology education was

  2. Conference Paper NFO-7:7th International Conference on Near-Field Optics and Related Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Novotny, Lukas [Univ. of Rochester, NY (United States)

    2004-10-18

    The seventh conference in the NFO conference series, held here in Rochester, provided to be the principal forum for advances in sub-wavelength optics, near-field optical microscopy, local field enhancement, instrumental developments and the ever-increasing range of applications. This conference brought together the diverse scientific communities working on the theory and application of near-field optics (NFO) and related techniques.

  3. Radiation Effects on Current Field Programmable Technologies

    Science.gov (United States)

    Katz, R.; LaBel, K.; Wang, J. J.; Cronquist, B.; Koga, R.; Penzin, S.; Swift, G.

    1997-01-01

    Manufacturers of field programmable gate arrays (FPGAS) take different technological and architectural approaches that directly affect radiation performance. Similar y technological and architectural features are used in related technologies such as programmable substrates and quick-turn application specific integrated circuits (ASICs). After analyzing current technologies and architectures and their radiation-effects implications, this paper includes extensive test data quantifying various devices total dose and single event susceptibilities, including performance degradation effects and temporary or permanent re-configuration faults. Test results will concentrate on recent technologies being used in space flight electronic systems and those being developed for use in the near term. This paper will provide the first extensive study of various configuration memories used in programmable devices. Radiation performance limits and their impacts will be discussed for each design. In addition, the interplay between device scaling, process, bias voltage, design, and architecture will be explored. Lastly, areas of ongoing research will be discussed.

  4. Prosthetics and Related Technology

    Science.gov (United States)

    ... edge technologies such as robotics, tissue engineering, and nanotechnology to create lighter limbs that closely mimic their ... to teach service members’ spouses alternative and complementary medicine techniques shown to lessen anxiety and pain associated ...

  5. Proposal to negotiate a collaboration agreement related to the application of novel cavity fabrication techniques and Nb/Cu sputter coating technology in the field of superconducting RF for the Future Circular Collider (FCC) study

    CERN Document Server

    2015-01-01

    Proposal to negotiate a collaboration agreement related to the application of novel cavity fabrication techniques and Nb/Cu sputter coating technology in the field of superconducting RF for the Future Circular Collider (FCC) study

  6. SRS environmental technology development field test platform

    International Nuclear Information System (INIS)

    Riha, B.D.; Rossabi, J.; Eddy-Dilek, C.A.

    1995-01-01

    A critical and difficult step in the development and implementation of new technologies for environmental monitoring and characterization is successfully transferring these technologies to industry and government users for routine assessment and compliance activities. The Environmental Sciences Section of the DOE Savannah River Technology Center provides a forum for developers, potential users, and regulatory organizations to evaluate new technologies in comparison with baseline technologies in a well characterized field test bed. The principal objective of this project is to conduct comprehensive, objective field tests of monitoring and characterization technologies that are not currently used in EPA standard methods and evaluate their performance during actual operating conditions against baseline methods. This paper provides an overview of the field test site and a description of some of the technologies demonstrated at the site including their field applications

  7. Field Research and Evaluation Technology

    Science.gov (United States)

    Ianni, Francis A. J.

    1977-01-01

    Discusses the utility of field research techniques for the evaluation of educational programs in general and the Minneapolis South East Alternatives Program in particular. Examines relationships between theory, field research, and evaluation in education and describes a pattern of relationships that has evaluative utility and provides responsible…

  8. Quality-related enzymes in plant-based products: effects of novel food processing technologies part 2: pulsed electric field processing.

    Science.gov (United States)

    Terefe, Netsanet Shiferaw; Buckow, Roman; Versteeg, Cornelis

    2015-01-01

    Pulsed electric field (PEF) processing is an effective technique for the preservation of pumpable food products as it inactivates vegetative microbial cells at ambient to moderate temperature without significantly affecting the nutritional and sensorial quality of the product. However, conflicting views are expressed about the effect of PEF on enzymes. In this review, which is part 2 of a series of reviews dealing with the effectiveness of novel food preservation technologies for controlling enzymes, the scientific literature over the last decade on the effect of PEF on plant enzymes is critically reviewed to shed more light on the issue. The existing evidence indicates that PEF can result in substantial inactivation of most enzymes, although a much more intense process is required compared to microbial inactivation. Depending on the processing condition and the origin of the enzyme, up to 97% inactivation of pectin methylesterase, polyphenol oxidase, and peroxidase as well as no inactivation have been reported following PEF treatment. Both electrochemical effects and Ohmic heating appear to contribute to the observed inactivation, although the relative contribution depends on a number of factors including the origin of the enzyme, the design of the PEF treatment chamber, the processing condition, and the composition of the medium.

  9. Tunneling field effect transistor technology

    CERN Document Server

    Chan, Mansun

    2016-01-01

    This book provides a single-source reference to the state-of-the art in tunneling field effect transistors (TFETs). Readers will learn the TFETs physics from advanced atomistic simulations, the TFETs fabrication process and the important roles that TFETs will play in enabling integrated circuit designs for power efficiency. · Provides comprehensive reference to tunneling field effect transistors (TFETs); · Covers all aspects of TFETs, from device process to modeling and applications; · Enables design of power-efficient integrated circuits, with low power consumption TFETs.

  10. Functional statistics and related fields

    CERN Document Server

    Bongiorno, Enea; Cao, Ricardo; Vieu, Philippe

    2017-01-01

    This volume collects latest methodological and applied contributions on functional, high-dimensional and other complex data, related statistical models and tools as well as on operator-based statistics. It contains selected and refereed contributions presented at the Fourth International Workshop on Functional and Operatorial Statistics (IWFOS 2017) held in A Coruña, Spain, from 15 to 17 June 2017. The series of IWFOS workshops was initiated by the Working Group on Functional and Operatorial Statistics at the University of Toulouse in 2008. Since then, many of the major advances in functional statistics and related fields have been periodically presented and discussed at the IWFOS workshops. .

  11. High magnetic fields science and technology

    CERN Document Server

    Miura, Noboru

    2003-01-01

    This three-volume book provides a comprehensive review of experiments in very strong magnetic fields that can only be generated with very special magnets. The first volume is entirely devoted to the technology of laboratory magnets: permanent, superconducting, high-power water-cooled and hybrid; pulsed magnets, both nondestructive and destructive (megagauss fields). Volumes 2 and 3 contain reviews of the different areas of research where strong magnetic fields are an essential research tool. These volumes deal primarily with solid-state physics; other research areas covered are biological syst

  12. Digital Technology for Geological Field Mapping

    Science.gov (United States)

    Rourke, Peter; Smith, Stuart; Vaughan, Alan; Ellis, Jenny

    2014-05-01

    The amount of time that students and professionals spend in the field has reduced over the past 25 years (Gibbs, 2012). Recent advances in technology are changing the way students and professionals are able to conduct geological field study. Applications such as Midland Valley Exploration's FieldMove Clino now allow the geologist to use their smartphone as a fast, georeferenced measuring device compared with a traditional compass-clinometer. Although we support the view that an understanding of field mapping and model building, taught at university level, is essential to give the geologist the ability to think in three and four dimensions, new technologies that automate the ability to digitise and visualise data in the field lead to a better appreciation of the geometry, scale, and evolution of geological structures and trapping mechanisms that will be encountered during a career in industry. The majority of future industry professionals own a smartphone or tablet device: A recent study found that four-fifths of new students own a smartphone and one-fifth own a tablet device (UCAS Media, 2013). This figure is increasing with each new intake of geoscience students. With the increased availability and affordability of smartphone and tablet devices, new techniques are being examined for digital data collection in the field. If the trend continues that geoscience students are likely to spend less time in the field than their predecessors, then the time available must be spent as effectively as possible. Digital devices allow students and professionals alike to optimise the time spent in the field, allowing more time to think about geological relationships, and highlighting areas of uncertainty that can be studied further. This poster will examine the use of new digital smartphone and tablet devices for the collection of geological field data.

  13. Near Field Communication: Technology and Market Trends

    Directory of Open Access Journals (Sweden)

    Gabriella Arcese

    2014-09-01

    Full Text Available Among the different hi-tech content domains, the telecommunications industry is one of the most relevant, in particular for the Italian economy. Moreover, Near Field Communication (NFC represents an example of innovative production and a technological introduction in the telecommunications context. It has a threefold function: card emulator, peer-to-peer communication and digital content access, and it could be pervasively integrated in many different domains, especially in the mobile payment one. The increasing attention on NFC technology from the academic community has improved an analysis on the changes and the development perspective about mobile payments. It has considered the work done by the GSMA (Global System for Mobile Communications Association and the NFC Forum in recent years. This study starts from an analysis of the scientific contributions to Near Field Communication and how the main researches on this topic were conceived. Our focus is on the diffusion rates, the adoption rates and the technology life cycle. After that, we analyze the technical-economical elements of NFC. Finally, this work presents the state of art of the improvements to this technology with a deeper focus on NFC technologies applied to the tourism industry. In this way, we have done a case analysis that shows some of the NFC existent applications linked to each stage of the tourism value chain.

  14. Technology for collecting and analyzing relational data

    Directory of Open Access Journals (Sweden)

    E. N. Fedorova

    2016-01-01

    Full Text Available Purpose of the study. The scientific and educational organizations use traditionally e-mail with Microsoft Excel spreadsheets and Microsoft Word documents for operational data collection. The disadvantages of this approach include the lack of control of the correctness of the data input, the complexity of processing the information received due to non-relational data model, etc. There are online services that enable to organize the collection of data in a relational form. The disadvantages of these systems are: the absence of thesaurus support; a limited set of elements of data input control; the limited control the operation of the input form; most of the systems is shareware, etc. Thus, it is required the development of Internet data collection and analysis technology, which should allow to identify quickly model the data collected and automatically implement data collection in accordance with this model.Materials and methods. The article describes the technology developed and tested for operational data collection and analysis using "Faramant" system. System operation "Faramant" is based on a model document, which includes three components: description of the data structure; visualization; logic of form work. All stages of the technology are performed by the user using the browser. The main stage of the proposed technology is the definition of the data model as a set of relational tables. To create a table within the system it’s required to determine the name and a list of fields. For each field, you must specify its name and use the control to the data input and logic of his work. Controls are used to organize the correct input data depending on the data type. Based on a model system "Faramant" automatically creates a filling form, using which users can enter information. To change the form visualization, you can use the form template. The data can be viewed page by page in a table. For table rows, you can apply different filters. To

  15. Innovative technologies for managing oil field waste

    International Nuclear Information System (INIS)

    Veil, J.A.

    2003-01-01

    Each year, the oil industry generates millions of barrels of wastes that need to be properly managed. For many years, most oil field wastes were disposed of at a significant cost. However, over the past decade, the industry has developed many processes and technologies to minimize the generation of wastes and to more safely and economically dispose of the waste that is generated. Many companies follow a three-tiered waste management approach. First, companies try to minimize waste generation when possible. Next, they try to find ways to reuse or recycle the wastes that are generated. Finally, the wastes that cannot be reused or recycled must be disposed of. Argonne National Laboratory (Argonne) has evaluated the feasibility of various oil field waste management technologies for the U.S. Department of Energy. This paper describes four of the technologies Argonne has reviewed. In the area of waste minimization, the industry has developed synthetic-based drilling muds (SBMs) that have the desired drilling properties of oil-based muds without the accompanying adverse environmental impacts. Use of SBMs avoids significant air pollution from work boats hauling offshore cuttings to shore for disposal and provides more efficient drilling than can be achieved with water-based muds. Downhole oil/water separators have been developed to separate produced water from oil at the bottom of wells. The produced water is directly injected to an underground formation without ever being lifted to the surface, thereby avoiding potential for groundwater or soil contamination. In the area of reuse/recycle, Argonne has worked with Southeastern Louisiana University and industry to develop a process to use treated drill cuttings to restore wetlands in coastal Louisiana. Finally, in an example of treatment and disposal, Argonne has conducted a series of four baseline studies to characterize the use of salt caverns for safe and economic disposal of oil field wastes.

  16. Teachers in relation with technologies

    Directory of Open Access Journals (Sweden)

    Magdalena ROA

    2017-06-01

    Full Text Available Entering an Information and Comunication Technologies (ICTs redefines the communication ways and the use of knowledge among students and between students and teachers. Joining the high-tech pedagogies demands for the teacher to relocate himself in light of the technological model embodied in ICTs incorporated to their classes. This investigation is framed in a case study that aspires to reconstruct the intervention of a Physics teacher's practice when incorporating applets to his classes. In order to know the state of art in the relationship between teachers and new technologies a bibliographic revision is carried out. It is possible to infer the need to keep company the teachers while they are implementing technologies in their practice.

  17. Application of stereo-imaging technology to medical field.

    Science.gov (United States)

    Nam, Kyoung Won; Park, Jeongyun; Kim, In Young; Kim, Kwang Gi

    2012-09-01

    There has been continuous development in the area of stereoscopic medical imaging devices, and many stereoscopic imaging devices have been realized and applied in the medical field. In this article, we review past and current trends pertaining to the application stereo-imaging technologies in the medical field. We describe the basic principles of stereo vision and visual issues related to it, including visual discomfort, binocular disparities, vergence-accommodation mismatch, and visual fatigue. We also present a brief history of medical applications of stereo-imaging techniques, examples of recently developed stereoscopic medical devices, and patent application trends as they pertain to stereo-imaging medical devices. Three-dimensional (3D) stereo-imaging technology can provide more realistic depth perception to the viewer than conventional two-dimensional imaging technology. Therefore, it allows for a more accurate understanding and analysis of the morphology of an object. Based on these advantages, the significance of stereoscopic imaging in the medical field increases in accordance with the increase in the number of laparoscopic surgeries, and stereo-imaging technology plays a key role in the diagnoses of the detailed morphologies of small biological specimens. The application of 3D stereo-imaging technology to the medical field will help improve surgical accuracy, reduce operation times, and enhance patient safety. Therefore, it is important to develop more enhanced stereoscopic medical devices.

  18. Applications of GPS technologies to field sports.

    Science.gov (United States)

    Aughey, Robert J

    2011-09-01

    Global positioning system (GPS) technology was made possible after the invention of the atomic clock. The first suggestion that GPS could be used to assess the physical activity of humans followed some 40 y later. There was a rapid uptake of GPS technology, with the literature concentrating on validation studies and the measurement of steady-state movement. The first attempts were made to validate GPS for field sport applications in 2006. While GPS has been validated for applications for team sports, some doubts continue to exist on the appropriateness of GPS for measuring short high-velocity movements. Thus, GPS has been applied extensively in Australian football, cricket, hockey, rugby union and league, and soccer. There is extensive information on the activity profile of athletes from field sports in the literature stemming from GPS, and this includes total distance covered by players and distance in velocity bands. Global positioning systems have also been applied to detect fatigue in matches, identify periods of most intense play, different activity profiles by position, competition level, and sport. More recent research has integrated GPS data with the physical capacity or fitness test score of athletes, game-specific tasks, or tactical or strategic information. The future of GPS analysis will involve further miniaturization of devices, longer battery life, and integration of other inertial sensor data to more effectively quantify the effort of athletes.

  19. Field application of pathogen detection technologies

    Energy Technology Data Exchange (ETDEWEB)

    Straub, Tim M.; Call, Douglas R.; Bruckner-Lea, Cindy J.; Colburn, Heather A.; Baird, Cheryl L.; Bartholomew, Rachel A.; Ozanich, Richard M.; Jarman, Kristin H.

    2016-06-29

    Over the last 10 years there has been a significant increase in commercial products designed for field-based detection of microbial pathogens. This is due, in part, to the anthrax attacks in the United States in 2001, and the need for first responders to quickly identify the composition of suspected white powders and other potential biothreats. Demand for rapid detection is also driven by the need to ensure safe food, water, and environmental systems. From a technology perspective, rapid identification methods have largely capitalized on PCR and other molecular recognition techniques that can be deployed as robust field instrumentation. Examples of the relevant needs include the ability to: 1) declare a water distribution system free of microbial pathogens after a pipe/main break repair; 2) assess risks of contamination such as when produce production and processing plants are located near concentrated animal feeing operations; 3) evaluate the safety of ready-to-eat products; 4) determine the extent of potential serious disease outbreaks in remote and/or disaster stricken areas where access to clinical laboratories is not an immediate option; and 5) quickly assess credible biological terrorism events. Many of the principles underlying rapid detection methods are derived from methods for environmental microbiology, but there is a dearth of literature describing and evaluating field-based detection systems. Thus, the aims of this chapter are to: 1) summarize the different kinds of commercially available sampling kits and field-based biological detectors; 2) highlight some of the continued challenges of sample preparation to stimulate new research towards minimizing the impact of inhibitors on PCR-based detection systems; 3) describe our general rationale and statistically-based approach for instrument evaluation; 4) provide statistical and spatial guidelines for developing valid sampling plans; and 5) summarize some current needs and emerging technologies. This

  20. Relativity in Combinatorial Gravitational Fields

    Directory of Open Access Journals (Sweden)

    Mao Linfan

    2010-04-01

    Full Text Available A combinatorial spacetime $(mathscr{C}_G| uboverline{t}$ is a smoothly combinatorial manifold $mathscr{C}$ underlying a graph $G$ evolving on a time vector $overline{t}$. As we known, Einstein's general relativity is suitable for use only in one spacetime. What is its disguise in a combinatorial spacetime? Applying combinatorial Riemannian geometry enables us to present a combinatorial spacetime model for the Universe and suggest a generalized Einstein gravitational equation in such model. Forfinding its solutions, a generalized relativity principle, called projective principle is proposed, i.e., a physics law ina combinatorial spacetime is invariant under a projection on its a subspace and then a spherically symmetric multi-solutions ofgeneralized Einstein gravitational equations in vacuum or charged body are found. We also consider the geometrical structure in such solutions with physical formations, and conclude that an ultimate theory for the Universe maybe established if all such spacetimes in ${f R}^3$. Otherwise, our theory is only an approximate theory and endless forever.

  1. Relativity in Combinatorial Gravitational Fields

    Directory of Open Access Journals (Sweden)

    Mao L.

    2010-07-01

    Full Text Available A combinatorial spacetime ( C G j t is a smoothly combinatorial manifold C underlying a graph G evolving on a time vector t . As we known, Einstein’s general relativity is suit- able for use only in one spacetime. What is its disguise in a combinatorial spacetime ? Applying combinatorial Riemannian geometry enables us to present a combinatorial spacetime model for the Universe and suggest a generalized Einstein gravitational equa- tion in such model. For finding its solutions, a generalized relativity principle, called projective principle is proposed, i.e., a physics law in a combinatorial spacetime is invariant under a projection on its a subspace and then a spherically symmetric multi- solutions of generalized Einstein gravitational equations in vacuum or charged body are found. We also consider the geometrical structure in such solutions with physical for- mations, and conclude that an ultimate theory for the Universe maybe established if all such spacetimes in R 3 . Otherwise, our theory is only an approximate theory and endless forever.

  2. Recent developments in radiation field control technology

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.J. [Electric Power Research Institute, Palo Alto, CA (United States)

    1995-03-01

    The U.S. nuclear power industry has been remarkably successful in reducing worker radiation exposures over the past ten years. There has been over a fourfold reduction in the person-rem incurred for each MW.year of electric power generated: from 1.8 in 1980, to only 0.39 person-rems in 1991 and 1992. Preliminary data for 1993 are even lower: approximately 0.37 person-rem.MW.year. Despite this substantial improvement, challenges for the industry remain. Individual exposure limits have been tightened in ICRP 60 and there will be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts with be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts will be required to meet the industry goals for 1995. Reducing out-of-core radiation fields offer the best chance of continuing the downward trend in exposures. To assist utilities select the most economic technology for their specific plants, EPRI has published a manual capturing worldwide operating experience with radiation-field control techniques (TR-100265). No one method will suffice, but implementing suitable combinations from this collection will enable utilities to achieve their exposure goals. Radiation reduction is generally cost-effective: outages are shorter, manpower requirements are reduced and work quality is improved. Despite the up front costs, the benefits over the following 1-3 years typically outweigh the expenses.

  3. Recent developments in radiation field control technology

    International Nuclear Information System (INIS)

    Wood, C.J.

    1995-01-01

    The U.S. nuclear power industry has been remarkably successful in reducing worker radiation exposures over the past ten years. There has been over a fourfold reduction in the person-rem incurred for each MW.year of electric power generated: from 1.8 in 1980, to only 0.39 person-rems in 1991 and 1992. Preliminary data for 1993 are even lower: approximately 0.37 person-rem.MW.year. Despite this substantial improvement, challenges for the industry remain. Individual exposure limits have been tightened in ICRP 60 and there will be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts with be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts will be required to meet the industry goals for 1995. Reducing out-of-core radiation fields offer the best chance of continuing the downward trend in exposures. To assist utilities select the most economic technology for their specific plants, EPRI has published a manual capturing worldwide operating experience with radiation-field control techniques (TR-100265). No one method will suffice, but implementing suitable combinations from this collection will enable utilities to achieve their exposure goals. Radiation reduction is generally cost-effective: outages are shorter, manpower requirements are reduced and work quality is improved. Despite the up front costs, the benefits over the following 1-3 years typically outweigh the expenses

  4. Cooperation arrangements related to technology transfer

    International Nuclear Information System (INIS)

    Eysel, G.

    1986-04-01

    A developing country which considers to launch a nuclear program should put as much as possible efforts to elaborate a program which suits the country's needs as well as reflects its capabilities. It deems advantageous that a developing country makes use of the experience and knowledge in the nuclear field of a partner country already in the phase when exploring the technical and commercial aspects of a nuclear power program. For the different stages of cooperation between two countries a three-level concept appears advisable for establishing the basis for individual cooperation agreement. The first level are agreements between the governments of both countries on joint scientific research projects and technical development programs covering a broad spectrum of activities not limited to the energy sector. At the second level cooperation agreements can already concentrate on the energy sector and e.g. specifically investigate the energy structure of the developing country. If this investigation results in the decision of the developing country to establish a nuclear power program the next level will cover a broad based cooperation in the nuclear field including a large number of different cooperation contracts in various fields. In this stage of bilateral cooperation the main emphasis will be put on industrial cooperation. Cooperation agreements to be concluded between respective partners of both countries may cover fields related to research and development, engineering of a nuclear power plant, manufacturing of its components, erection and installation as well as operation of the plant. The most common agreements refer to technical cooperation, which covers not only the transfer of blueprints but also training of the recipient's personnel in the partner's country and delegation of experts to the recipient's country. The most comprehensive form of cooperation is the foundation of a joint venture company where the technology partner does not only transfer his know

  5. Relations between the technological standards and technological appropriation

    Directory of Open Access Journals (Sweden)

    Carlos Alberto PRADO GUERRERO

    2010-06-01

    Full Text Available The objective of this study is to analyze the educational practices of using Blackboard in blended learning environments with students of higher education to understand the relationship between technological appropriation and standards of educational technology. To achieve that goal, the following research question was raised: ¿To what extent are the standards of education technology with the appropriation of technology in blended learning environments in higher educa­tion related? The contextual framework of this work includes the following topics: the institution, teaching, teachers and students. The design methodology that was used is of a correlation type. Correlations were carried out to determine the frequency and level in the technological standards as well as the appropriation of technology. In the comparison of the results obtained by the students, the teachers and the platform; we found that students in the school study showed a high degree of technology ownership and this was the same for the performance shown on the technological standards. It was established that teachers play a key role in developing the techno­logical appropriation of students and performance in technology standards.

  6. On Vertical Relations and Technology Adoption Timing

    OpenAIRE

    Maria Alipranti; Chrysovalantou Milliou; Emmanuel Petrakis

    2015-01-01

    This paper explores how vertical relations influence the timing of new technology adoption. It shows that both the bargaining power distribution among the vertically related firms and the contract type through which vertical trading is conducted affect crucially the speed of adoption: the downstream firms can adopt later a new technology when the upstream bargaining power increases as well as when wholesale price contracts, instead of two-part tariffs, are employed. Importantly, it shows that...

  7. The field of tension between technology and journalism

    International Nuclear Information System (INIS)

    Hess, W.

    1992-01-01

    The relationship between technology and journalism is explained by nine theses, the seven most important of them being: many public media pay little positive attention to technology. A main reason for this is that among responsible editors there are too few journalists with a fully-fledged scientific education, and almost no engineers; nevertheless the portents are good for technical facts being presented in future in a more competent and detailed way than before; accuracy down to the smallest detail is not in journalism - one the contrary, it is important to grasp trends and put them into the right context; if today there is a field of tension between technology and journalism, it is due also to the fact that quite a few arguments put forward by technicians turned out to be clichees; journalists do not invent their news and reports, but refer to expert statements which, however, are inexpensive; enterprise-specific press relations must be guided by the demands of journalists - otherwise they are not worth the effort; if you (technicians) move towards technology, it is not ''love's labours lost'', because also journalism has moved recently towards technology. (orig./HSCH) [de

  8. Consistency relations in multi-field inflation

    Science.gov (United States)

    Gong, Jinn-Ouk; Seo, Min-Seok

    2018-02-01

    We study the consequences of spatial coordinate transformation in multi-field inflation. Among the spontaneously broken de Sitter isometries, only dilatation in the comoving gauge preserves the form of the metric and thus results in quantum-protected Slavnov-Taylor identities. We derive the corresponding consistency relations between correlation functions of cosmological perturbations in two different ways, by the connected and one-particle-irreducible Green's functions. The lowest-order consistency relations are explicitly given, and we find that even in multi-field inflation the consistency relations in the soft limit are independent of the detail of the matter sector.

  9. Mean-field approximation minimizes relative entropy

    International Nuclear Information System (INIS)

    Bilbro, G.L.; Snyder, W.E.; Mann, R.C.

    1991-01-01

    The authors derive the mean-field approximation from the information-theoretic principle of minimum relative entropy instead of by minimizing Peierls's inequality for the Weiss free energy of statistical physics theory. They show that information theory leads to the statistical mechanics procedure. As an example, they consider a problem in binary image restoration. They find that mean-field annealing compares favorably with the stochastic approach

  10. Screening vector field modifications of general relativity

    International Nuclear Information System (INIS)

    Beltrán Jiménez, Jose; Delvas Fróes, André Luís; Mota, David F.

    2013-01-01

    A screening mechanism for conformal vector–tensor modifications of general relativity is proposed. The conformal factor depends on the norm of the vector field and makes the field to vanish in high dense regions, whereas drives it to a non-null value in low density environments. Such process occurs due to a spontaneous symmetry breaking mechanism and gives rise to both the screening of fifth forces as well as Lorentz violations. The cosmology and local constraints are also computed

  11. Conference on Fractals and Related Fields III

    CERN Document Server

    Seuret, Stéphane

    2017-01-01

    This contributed volume provides readers with an overview of the most recent developments in the mathematical fields related to fractals, including both original research contributions, as well as surveys from many of the leading experts on modern fractal theory and applications. It is an outgrowth of the Conference of Fractals and Related Fields III, that was held on September 19-25, 2015 in île de Porquerolles, France. Chapters cover fields related to fractals such as harmonic analysis, multifractal analysis, geometric measure theory, ergodic theory and dynamical systems, probability theory, number theory, wavelets, potential theory, partial differential equations, fractal tilings, combinatorics, and signal and image processing. The book is aimed at pure and applied mathematicians in these areas, as well as other researchers interested in discovering the fractal domain.

  12. Consistency relation for cosmic magnetic fields

    Science.gov (United States)

    Jain, Rajeev Kumar; Sloth, Martin S.

    2012-12-01

    If cosmic magnetic fields are indeed produced during inflation, they are likely to be correlated with the scalar metric perturbations that are responsible for the cosmic microwave background anisotropies and large scale structure. Within an archetypical model of inflationary magnetogenesis, we show that there exists a new simple consistency relation for the non-Gaussian cross correlation function of the scalar metric perturbation with two powers of the magnetic field in the squeezed limit where the momentum of the metric perturbation vanishes. We emphasize that such a consistency relation turns out to be extremely useful to test some recent calculations in the literature. Apart from primordial non-Gaussianity induced by the curvature perturbations, such a cross correlation might provide a new observational probe of inflation and can in principle reveal the primordial nature of cosmic magnetic fields.

  13. Special relativity and classical field theory

    CERN Document Server

    Susskind, Leonard

    2017-01-01

    Physicist Leonard Susskind and data engineer Art Friedman are back. This time, they introduce readers to Einstein's special relativity and Maxwell's classical field theory. Using their typical brand of real math, enlightening drawings, and humor, Susskind and Friedman walk us through the complexities of waves, forces, and particles by exploring special relativity and electromagnetism. It's a must-read for both devotees of the series and any armchair physicist who wants to improve their knowledge of physics' deepest truths.

  14. Field strenght copies in general relativity

    International Nuclear Information System (INIS)

    Oliveira, C.G.; Letelier, P.S.

    Considering the SO(3,1) local, internal, transformations as the gauge group of general relativity, the possibility of having different affine connections (potentials) generating the same internal curvature (field strenght) is studied. Explicit examples of 'copies' are exhibited. The possibility to extend the concept of 'copy' to more general geometries is discussed. (Author) [pt

  15. Field Applications of Gamma Column Scanning Technology

    International Nuclear Information System (INIS)

    Aquino, Denis D.; Mallilin, Janice P.; Nuñez, Ivy Angelica A.; Bulos, Adelina DM.

    2015-01-01

    The Isotope Techniques Section (ITS) under the Nuclear Service Division (NSD) of the Philippine Nuclear Research Institute (PNRI) conducts services, research and development on radioisotope and sealed source application in the industry. This aims to benefit the manufacturing industries such as petroleum, petrochemical, chemical, energy, waste, column treatment plant, etc. through on line inspection and troubleshooting of a process vessel, column or pipe that could optimize the process operation and increase production efficiency. One of the most common sealed source techniques for industrial applications is the gamma column scanning technology. Gamma column scanning technology is an established technique for inspection, analysis and diagnosis of industrial columns for process optimization, solving operational malfunctions and management of resources. It is a convenient non-intrusive, cost effective and cost-efficient technique to examine inner details of an industrial process vessel such as a distillation column while it is in operation. The Philippine Nuclear Research Institute (PNRI) recognize the importance and benefits of this technology and has implemented activities to make gamma column scanning locally available to benefit the Philippine industries. Continuous effort for capacity building is being pursued thru the implementation of in-house and on-the-job training abroad and upgrading of equipment. (author)

  16. Fast magnetic field computation in fusion technology using GPU technology

    Energy Technology Data Exchange (ETDEWEB)

    Chiariello, Andrea Gaetano [Ass. EURATOM/ENEA/CREATE, Dipartimento di Ingegneria Industriale e dell’Informazione, Seconda Università di Napoli, Via Roma 29, Aversa (CE) (Italy); Formisano, Alessandro, E-mail: Alessandro.Formisano@unina2.it [Ass. EURATOM/ENEA/CREATE, Dipartimento di Ingegneria Industriale e dell’Informazione, Seconda Università di Napoli, Via Roma 29, Aversa (CE) (Italy); Martone, Raffaele [Ass. EURATOM/ENEA/CREATE, Dipartimento di Ingegneria Industriale e dell’Informazione, Seconda Università di Napoli, Via Roma 29, Aversa (CE) (Italy)

    2013-10-15

    Highlights: ► The paper deals with high accuracy numerical simulations of high field magnets. ► The porting of existing codes of High Performance Computing architectures allowed to obtain a relevant speedup while not reducing computational accuracy. ► Some examples of applications, referred to ITER-like magnets, are reported. -- Abstract: One of the main issues in the simulation of Tokamaks functioning is the reliable and accurate computation of actual field maps in the plasma chamber. In this paper a tool able to accurately compute magnetic field maps produced by active coils of any 3D shape, wound with high number of conductors, is presented. Under linearity assumption, the coil winding is modeled by means of “sticks”, following each conductor's shape, and the contribution of each stick is computed using high speed Graphic Computing Units (GPU's). Relevant speed enhancements with respect to standard parallel computing environment are achieved in this way.

  17. Simple recursion relations for general field theories

    International Nuclear Information System (INIS)

    Cheung, Clifford; Shen, Chia-Hsien; Trnka, Jaroslav

    2015-01-01

    On-shell methods offer an alternative definition of quantum field theory at tree-level, replacing Feynman diagrams with recursion relations and interaction vertices with a handful of seed scattering amplitudes. In this paper we determine the simplest recursion relations needed to construct a general four-dimensional quantum field theory of massless particles. For this purpose we define a covering space of recursion relations which naturally generalizes all existing constructions, including those of BCFW and Risager. The validity of each recursion relation hinges on the large momentum behavior of an n-point scattering amplitude under an m-line momentum shift, which we determine solely from dimensional analysis, Lorentz invariance, and locality. We show that all amplitudes in a renormalizable theory are 5-line constructible. Amplitudes are 3-line constructible if an external particle carries spin or if the scalars in the theory carry equal charge under a global or gauge symmetry. Remarkably, this implies the 3-line constructibility of all gauge theories with fermions and complex scalars in arbitrary representations, all supersymmetric theories, and the standard model. Moreover, all amplitudes in non-renormalizable theories without derivative interactions are constructible; with derivative interactions, a subset of amplitudes is constructible. We illustrate our results with examples from both renormalizable and non-renormalizable theories. Our study demonstrates both the power and limitations of recursion relations as a self-contained formulation of quantum field theory.

  18. Building STEAM in Design-Related Technology

    Science.gov (United States)

    Maldonado, Elaine; Pearson, Karen R.

    2013-01-01

    TECH-FIT is a National Science Foundation initiative at FIT, part of the State University of New York. An institution with over 85% female students, this interdisciplinary, design-related STEM (Science, Technology, Engineering, and Mathematics) project sought to increase inclusion and student performance in STEM. Building on new and existing…

  19. Nano-Electric Field TechnologY (NEFTY)

    Science.gov (United States)

    Kintner, Paul M.

    2000-01-01

    The NEFTY SR&T grant was focused on the development of novel electric field boom systems for sounding rocket applications. A "yo-yo"-type boom that unwraps from a rotating and damped axel was analyzed through a simulation with Prof. Psiaki of Mechanical and Aerospace Engineering at Cornell University. The basic parameters of the analysis were evaluated and validated on a spinning platform prototyping system developed at Cornell University. The full "yo-yo"-type boom system is being developing for the SIERRA sounding rocket flight scheduled for a January 2002 launch. The principal results from this study were published.

  20. Field-programmable custom computing technology architectures, tools, and applications

    CERN Document Server

    Luk, Wayne; Pocek, Ken

    2000-01-01

    Field-Programmable Custom Computing Technology: Architectures, Tools, and Applications brings together in one place important contributions and up-to-date research results in this fast-moving area. In seven selected chapters, the book describes the latest advances in architectures, design methods, and applications of field-programmable devices for high-performance reconfigurable systems. The contributors to this work were selected from the leading researchers and practitioners in the field. It will be valuable to anyone working or researching in the field of custom computing technology. It serves as an excellent reference, providing insight into some of the most challenging issues being examined today.

  1. Mapping the (R-)Evolution of Technological Fields

    DEFF Research Database (Denmark)

    Jurowetzki, Roman; Hain, Daniel S.

    2014-01-01

    use the broad area of Technological Singularity, an umbrella term for different technologies ranging from neuroscience to machine learning and bioengineering, which are seen as main contributors to the development of artificial intelligence and human enhancement technologies. Using a socially enhanced......The aim of this paper was to provide a framework and novel methodology geared towards mapping technological change in complex interdependent systems by using large amounts of unstructured data from various recent on- and offline sources. Combining techniques from the fields of natural language...... processing and network analysis, we are able to identify technological fields as overlapping communities of knowledge fragments. Over time persistence of these fragments allows to observe how these fields evolve into trajectories, which may change, split, merge and finally disappear. As empirical example we...

  2. Creating "the Field": Glocality, Relationality and Transformativity

    Directory of Open Access Journals (Sweden)

    Hans Erik Næss

    2016-08-01

    Full Text Available Due to its standing as the basic unit of analysis in ethnography, "the field" needs to be approached with precision. However, while there have been plenty of attempts to detach the concept from its historical relation with places and groups, there are few reconstructions of it—not least in sociology—which prove useful in an increasingly complex world. For that reason, the objective in this article is to introduce three dimensions of fieldwork that enable the sociological ethnographer to unravel the concept and reassemble it for analytical purposes. Based on experiences from fieldwork on the FIA World Rally Championship (WRC conducted at various sites, the mutually inclusive processes of glocality, relationality and transformativity are discussed as a way to both define and analyze the field. The result is a conceptualization of the field as a way into a research topic (by decreasing the risk of getting lost in the topical diversity and a way out of it (by increasing the chances of communicating field-relevant findings. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1603152

  3. Near field ice detection using infrared based optical imaging technology

    Science.gov (United States)

    Abdel-Moati, Hazem; Morris, Jonathan; Zeng, Yousheng; Corie, Martin Wesley; Yanni, Victor Garas

    2018-02-01

    If not detected and characterized, icebergs can potentially pose a hazard to oil and gas exploration, development and production operations in arctic environments as well as commercial shipping channels. In general, very large bergs are tracked and predicted using models or satellite imagery. Small and medium bergs are detectable using conventional marine radar. As icebergs decay they shed bergy bits and growlers, which are much smaller and more difficult to detect. Their low profile above the water surface, in addition to occasional relatively high seas, makes them invisible to conventional marine radar. Visual inspection is the most common method used to detect bergy bits and growlers, but the effectiveness of visual inspections is reduced by operator fatigue and low light conditions. The potential hazard from bergy bits and growlers is further increased by short detection range (<1 km). As such, there is a need for robust and autonomous near-field detection of such smaller icebergs. This paper presents a review of iceberg detection technology and explores applications for infrared imagers in the field. Preliminary experiments are performed and recommendations are made for future work, including a proposed imager design which would be suited for near field ice detection.

  4. Factors Affecting Teachers' Competence in the Field of Information Technology

    Science.gov (United States)

    Tambunan, Hamonangan

    2014-01-01

    The development of learning technology today, have a direct impact on improving teachers' information technology competence. This paper is presented the results of research related to teachers' information technology competence. The study was conducted with a survey of some 245 vocational high school teachers. There are two types of instrument…

  5. Consistency relations in effective field theory

    Energy Technology Data Exchange (ETDEWEB)

    Munshi, Dipak; Regan, Donough, E-mail: D.Munshi@sussex.ac.uk, E-mail: D.Regan@sussex.ac.uk [Astronomy Centre, School of Mathematical and Physical Sciences, University of Sussex, Brighton BN1 9QH (United Kingdom)

    2017-06-01

    The consistency relations in large scale structure relate the lower-order correlation functions with their higher-order counterparts. They are direct outcome of the underlying symmetries of a dynamical system and can be tested using data from future surveys such as Euclid. Using techniques from standard perturbation theory (SPT), previous studies of consistency relation have concentrated on continuity-momentum (Euler)-Poisson system of an ideal fluid. We investigate the consistency relations in effective field theory (EFT) which adjusts the SPT predictions to account for the departure from the ideal fluid description on small scales. We provide detailed results for the 3D density contrast δ as well as the scaled divergence of velocity θ-bar . Assuming a ΛCDM background cosmology, we find the correction to SPT results becomes important at k ∼> 0.05 h/Mpc and that the suppression from EFT to SPT results that scales as square of the wave number k , can reach 40% of the total at k ≈ 0.25 h/Mpc at z = 0. We have also investigated whether effective field theory corrections to models of primordial non-Gaussianity can alter the squeezed limit behaviour, finding the results to be rather insensitive to these counterterms. In addition, we present the EFT corrections to the squeezed limit of the bispectrum in redshift space which may be of interest for tests of theories of modified gravity.

  6. Magnetic field applications in modern technology and medicine

    International Nuclear Information System (INIS)

    Tenforde, T.S.

    1985-05-01

    A brief summary is given of several major applications of magnetism. A description of the range of magnetic field intensities to which humans are exposed in technologies that utilize large stationary magnetic fields is given. 12 refs., 8 figs., 3 tabs

  7. Challenges and emerging technologies within the field of pediatric actigraphy

    Directory of Open Access Journals (Sweden)

    Barbara eGalland

    2014-08-01

    Full Text Available Actigraphy as an objective measure of sleep and wakefulness in infants and children has gained popularity over the last 20 years. However, the field lacks published guidelines for sleep-wake identification within pediatric age groups. The scoring rules vary greatly and although sensitivity (sleep agreement with polysomnography is usually high, a significant limitation remains in relation to specificity (wake agreement. Furthermore, accurate algorithm output and sleep-wake summaries usually require prior entry from daily logs of sleep–wake periods and artefact-related information (e.g. non-wear time, involving significant parent co-operation. Scoring criteria for daytime naps remains an unexplored area. Many of the problems facing accuracy of measurement are inherent within the field of actigraphy itself, particularly where sleep periods containing significant movements are erroneously classified as wake, and within quiet wakefulness when no movements are detected, erroneously classified as sleep. We discuss the challenges of actigraphy for pediatric sleep, briefly describe the technical basis and consider a number of technological approaches that may facilitate improved classification of errors in sleep-wake discrimination.

  8. Challenges and Emerging Technologies within the Field of Pediatric Actigraphy

    Science.gov (United States)

    Galland, Barbara; Meredith-Jones, Kim; Terrill, Philip; Taylor, Rachael

    2014-01-01

    Actigraphy as an objective measure of sleep and wakefulness in infants and children has gained popularity over the last 20 years. However, the field lacks published guidelines for sleep–wake identification within pediatric age groups. The scoring rules vary greatly and although sensitivity (sleep agreement with polysomnography) is usually high, a significant limitation remains in relation to specificity (wake agreement). Furthermore, accurate algorithm output and sleep–wake summaries usually require prior entry from daily logs of sleep–wake periods and artifact-related information (e.g., non-wear time), involving significant parent co-operation. Scoring criteria for daytime naps remains an unexplored area. Many of the problems facing accuracy of measurement are inherent within the field of actigraphy itself, particularly where sleep periods containing significant movements are erroneously classified as wake, and within quiet wakefulness when no movements are detected, erroneously classified as sleep. We discuss the challenges of actigraphy for pediatric sleep, briefly describe the technical basis and consider a number of technological approaches that may facilitate improved classification of errors in sleep–wake discrimination. PMID:25191278

  9. Approach of field-emission display toward technology status

    Science.gov (United States)

    Ghrayeb, Joseph; Jackson, Timothy W.; Hopper, Darrel G.; Daniels, Reginald

    1998-09-01

    Flat panel display (FPD) technologies have emerged with smaller depth, size, and power than the cathode ray tube technology that now dominates the display market. Liquid crystal displays in general and active matrix liquid crystal displays (AMLCD), in particular, are the FPD technology of choice. The AMLCD technology is well established has undergone dramatic improvements in the past few years, a trend which is likely to continue. In recent years some potential or want-to- be ('wanabe') alternate technologies, such as field emission displays (FED), high gain emissive displays and vacuum fluorescent displays (VFD), have received substantial investments. For example, the VFD knowledge level has reached technology status as segmented displays in automotive and instrumentation applications. Much work has been done to improve FED technology status, resulting in many attempts to build production quality prototypes. However, no FED has actually gone into production. The question still remains: how close to production are these nascent technologies? This paper will examine how fast field emission displays are progressing towards technology status, which is defined as a display technology that is incorporated in products accepted by the market. This paper will provide a status update of where FED companies are and where they may be heading. Current development programs, recent demonstrations, and possible future product offerings will be discussed.

  10. Relativistic quantum metrology: exploiting relativity to improve quantum measurement technologies.

    Science.gov (United States)

    Ahmadi, Mehdi; Bruschi, David Edward; Sabín, Carlos; Adesso, Gerardo; Fuentes, Ivette

    2014-05-22

    We present a framework for relativistic quantum metrology that is useful for both Earth-based and space-based technologies. Quantum metrology has been so far successfully applied to design precision instruments such as clocks and sensors which outperform classical devices by exploiting quantum properties. There are advanced plans to implement these and other quantum technologies in space, for instance Space-QUEST and Space Optical Clock projects intend to implement quantum communications and quantum clocks at regimes where relativity starts to kick in. However, typical setups do not take into account the effects of relativity on quantum properties. To include and exploit these effects, we introduce techniques for the application of metrology to quantum field theory. Quantum field theory properly incorporates quantum theory and relativity, in particular, at regimes where space-based experiments take place. This framework allows for high precision estimation of parameters that appear in quantum field theory including proper times and accelerations. Indeed, the techniques can be applied to develop a novel generation of relativistic quantum technologies for gravimeters, clocks and sensors. As an example, we present a high precision device which in principle improves the state-of-the-art in quantum accelerometers by exploiting relativistic effects.

  11. Generating Relational Competitive Advantage from Strategic Technological Partnership

    DEFF Research Database (Denmark)

    Hu, Yimei; Zhang, Si; Li, Jizhen

    2012-01-01

    Collaborating with external partners on strategic technological partnerships (STPs) have been popular phenomena for long, which leads new development in existing theories on competitive advantage. Under the relational view, the competitive advantage is jointly generated by alliance firms. Though...... the relational view of competitive advantage has been proposed for more than a decade, few in-depth empirical researches are down within this field, especially case study on R&D strategic alliance from this perspective. Based on these considerations, we investigate an STP between a Danish transnational...... corporation and a Chinese private firm aiming to understand how to generate relational competitive from an STP? Based on the explorative case study, we find that there are three key processes related to relational competitive advantage: partner selection, relational rents generation and relational rents...

  12. Nuclear waste transmutation and related innovative technologies

    International Nuclear Information System (INIS)

    2002-01-01

    The main topics of the summer school meeting were 1. Motivation and programs for waste transmutation: The scientific perspective roadmaps; 2. The physics and scenarios of transmutation: The physics of transmutation and adapted reactor types. Impact on the fuel cycle and possible scenarios; 3. Accelerator driven systems and components: High intensity accelerators. Spallation targets and experiments. The sub critical core safety and simulation physics experiments; 4. Technologies and materials: Specific issues related to transmutation: Dedicated fuels for transmutation. Fuel processing - the role of pyrochemistry. Materials of irradiation. Lead/lead alloys. 5. Nuclear data: The N-TOF facility. Intermediate energy data and experiments. (orig./GL)

  13. Space nuclear power, propulsion, and related technologies.

    Energy Technology Data Exchange (ETDEWEB)

    Berman, Marshall

    1992-01-01

    Sandia National Laboratories (Sandia) is one of the nation's largest research and development (R&D) facilities, with headquarters at Albuquerque, New Mexico; a laboratory at Livermore, California; and a test range near Tonopah, Nevada. Smaller testing facilities are also operated at other locations. Established in 1945, Sandia was operated by the University of California until 1949, when, at the request of President Truman, Sandia Corporation was formed as a subsidiary of Bell Lab's Western Electric Company to operate Sandia as a service to the U.S. Government without profit or fee. Sandia is currently operated for the U.S. Department of Energy (DOE) by AT&T Technologies, Inc., a wholly-owned subsidiary of AT&T. Sandia's responsibility is national security programs in defense and energy with primary emphasis on nuclear weapon research and development (R&D). However, Sandia also supports a wide variety of projects ranging from basic materials research to the design of specialized parachutes. Assets, owned by DOE and valued at more than $1.2 billion, include about 600 major buildings containing about 372,000 square meters (m2) (4 million square feet [ft2]) of floor space, located on land totalling approximately 1460 square kilometers (km2) (562 square miles [mi]). Sandia employs about 8500 people, the majority in Albuquerque, with about 1000 in Livermore. Approximately 60% of Sandia's employees are in technical and scientific positions, and the remainder are in crafts, skilled labor, and administrative positions. As a multiprogram national laboratory, Sandia has much to offer both industrial and government customers in pursuing space nuclear technologies. The purpose of this brochure is to provide the reader with a brief summary of Sandia's technical capabilities, test facilities, and example programs that relate to military and civilian objectives in space. Sandia is interested in forming partnerships with industry and government

  14. Research status and development of application fields in enzyme technology

    Science.gov (United States)

    Ji, Y. B.; Wang, S. W.; Yu, M.; Ru, X.; Wei, C.; Zhu, H. J.; Li, Z. Y.; Zhao, H.; Qiao, A. N.; Guo, S. Z.; Lu, L.

    2018-01-01

    Biological enzymes are catalyzed by living cells, most of which are proteins, and very few are RNA. Biological engineering as a new high-tech has been rapid development, Enzyme manufacturing and application areas are gradually expanding, In this paper, the status and progress of the application of enzyme technology are reviewed by reviewing the literature. and aims to provide reference for the application of enzyme technology and provide scientific basis for its future research and development in new field.

  15. Earthquake related displacement fields near underground facilities

    International Nuclear Information System (INIS)

    Pratt, H.R.; Zandt, G.; Bouchon, M.

    1979-04-01

    Relative displacements of rock masses are evaluated in terms of geological evidence, seismological evidence, data from simulation experiments, and analytical predictive models. Numerical models have been developed to determine displacement fields as a function of depth, distance, and azimuth from an earthquake source. Computer calculations for several types of faults indicate that displacements decrease rapidly with distance from the fault, but that displacements can either increase or decrease as a function of depth depending on the type and geometry of the fault. For long shallow vertical strike-slip faults the displacement decreases markedly with depth. For square strike slip faults and for dip slip faults displacement does not decrease as markedly with depth. Geologic structure, material properties, and depth affect the seismic source spectrum. Amplification of the high frequencies of shear waves is larger by a factor of about 2 for layered geologic models than for an elastic half space

  16. A New Solution for Einstein Field Equation in General Relativity

    Science.gov (United States)

    Mousavi, Sadegh

    2006-05-01

    There are different solutions for Einstein field equation in general relativity that they have been proposed by different people the most important solutions are Schwarzchild, Reissner Nordstrom, Kerr and Kerr Newmam. However, each one of these solutions limited to special case. I've found a new solution for Einstein field equation which is more complete than all previous ones and this solution contains the previous solutions as its special forms. In this talk I will present my new metric for Einstein field equation and the Christofel symbols and Richi and Rieman tensor components for the new metric that I have calculated them by GR TENSOR software. As a result I will determine the actual movement of black holes which is different From Kerr black hole's movement. Finally this new solution predicts, existence of a new and constant field in the nature (that nobody can found it up to now), so in this talk I will introduce this new field and even I will calculate the amount of this field. SADEGH MOUSAVI, Amirkabir University of Technology.

  17. Vector Field Visual Data Analysis Technologies for Petascale Computational Science

    Energy Technology Data Exchange (ETDEWEB)

    Garth, Christoph; Deines, Eduard; Joy, Kenneth I.; Bethel, E. Wes; Childs, Hank; Weber, Gunther; Ahern, Sean; Pugmire, Dave; Sanderson, Allen; Johnson, Chris

    2009-11-13

    State-of-the-art computational science simulations generate large-scale vector field data sets. Visualization and analysis is a key aspect of obtaining insight into these data sets and represents an important challenge. This article discusses possibilities and challenges of modern vector field visualization and focuses on methods and techniques developed in the SciDAC Visualization and Analytics Center for Enabling Technologies (VACET) and deployed in the open-source visualization tool, VisIt.

  18. Field test plan: Buried waste technologies, Fiscal Year 1995

    International Nuclear Information System (INIS)

    Heard, R.E.; Hyde, R.A.; Engleman, V.S.; Evans, J.D.; Jackson, T.W.

    1995-06-01

    The US Department of Energy, Office of Technology Development, supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that, when integrated with commercially available baseline technologies, form a comprehensive remediation system for the effective and efficient remediation of buried waste. The Fiscal Year 1995 effort is to deploy and test multiple technologies from four functional areas of buried waste remediation: site characterization, waste characterization, retrieval, and treatment. This document is the basic operational planning document for the deployment and testing of the technologies that support the field testing in Fiscal Year 1995. Discussed in this document are the scope of the tests; purpose and objective of the tests; organization and responsibilities; contingency plans; sequence of activities; sampling and data collection; document control; analytical methods; data reduction, validation, and verification; quality assurance; equipment and instruments; facilities and utilities; health and safety; residuals management; and regulatory management

  19. Space matters: the relational power of mobile technologies

    Directory of Open Access Journals (Sweden)

    Nancy Odendaal

    2014-01-01

    Full Text Available The ubiquitous presence of mobile telephony and proliferation of digital networks imply a critical role for these technologies in overcoming the constraints of space in fragmented cities. Academic literature draws from a range of disciplines but fails to address the significance of new technologies for African and South African cities. Debates on technologies and urban spaces reflect a Northern bias and case literature that dwells on the developmental aspects of ICT do not engage with the broader significance with regards to urban change in African cities. This research addresses these gaps by examining the local transformative qualities of mobile telephony in a South African city, Durban. It focuses on the ways in which informal traders active in the city use technology. Actor-network theory was used in the analysis of the field work, uncovering material and human actors, network stabilization processes and agency in determining the transformative potential of this form of digital networking at city and local scales. Findings indicate that appropriation of technology is informed by livelihood strategies. Innovation is enabled when translation extends to appropriation. More in-depth research is needed on how technology is molded and appropriated to suit livelihoods. Throughout the research the spatial dimensions of the relationship between mobile telephony and networks were considered. The network spaces that emerge from actor relations do not correspond with the physical spaces usually considered in policy.

  20. Field transportable beta spectrometer. Innovative technology summary report

    International Nuclear Information System (INIS)

    1998-12-01

    The objective of the Large-Scale Demonstration Project (LSDP) is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory-East (ANL) Chicago Pile-5 Test Reactor (CP-5). The purpose of the LSDP is to demonstrate that by using innovative and improved deactivation and decommissioning (D and D) technologies from various sources, significant benefits can be achieved when compared to baseline D and D technologies. One such capability being addressed by the D and D Focus Area is rapid characterization for facility contaminants. The technology was field demonstrated during the period January 7 through January 9, 1997, and offers several potential benefits, including faster turn-around time, cost reduction, and reduction in secondary waste. This report describes a PC controlled, field-transportable beta counter-spectrometer which uses solid scintillation coincident counting and low-noise photomultiplier tubes to count element-selective filters and other solid media. The dry scintillation counter used in combination with an element-selective technology eliminates the mess and disposal costs of liquid scintillation cocktails. Software in the instrument provides real-time spectral analysis. The instrument can detect and measure Tc-99, Sr-90, and other beta emitters reaching detection limits in the 20 pCi range (with shielding). Full analysis can be achieved in 30 minutes. The potential advantages of a field-portable beta counter-spectrometer include the savings gained from field generated results. The basis for decision-making is provided with a rapid turnaround analysis in the field. This technology would be competitive with the radiometric analysis done in fixed laboratories and the associated chain of custody operations

  1. Application of plasma technology to nuclear engineering fields

    International Nuclear Information System (INIS)

    Suzuki, Masaaki; Akatsuka, Hiroshi

    1996-01-01

    In order to discuss about the application of the plasma technology to nuclear engineering fields, we mention two subjects, the oxygenation of metal chloride waste by oxygen plasma and the characterization of fine particles generated in the plasma process. Through the experimental results of two subjects, both of the advantage and the disadvantage of the plasma technology and their characteristics are shown and discussed. The following conclusions are obtained. The reactive plasma is effective to oxygenate the chloride wastes. The particle generation which is one of the disadvantages must not be specialized and its characteristics can be estimated. Consequently, the plasma technology should be applicable to nuclear engineering fields adopting its advantage and overcoming its disadvantage. (author)

  2. Electric field-based technologies for valorization of bioresources.

    Science.gov (United States)

    Rocha, Cristina M R; Genisheva, Zlatina; Ferreira-Santos, Pedro; Rodrigues, Rui; Vicente, António A; Teixeira, José A; Pereira, Ricardo N

    2018-04-01

    This review provides an overview of recent research on electrotechnologies applied to the valorization of bioresources. Following a comprehensive summary of the current status of the application of well-known electric-based processing technologies, such as pulsed electric fields (PEF) and high voltage electrical discharges (HVED), the application of moderate electric fields (MEF) as an extraction or valorization technology will be considered in detail. MEF, known by its improved energy efficiency and claimed electroporation effects (allowing enhanced extraction yields), may also originate high heating rates - ohmic heating (OH) effect - allowing thermal stabilization of waste stream for other added-value applications. MEF is a simple technology that mostly makes use of green solvents (mainly water) and that can be used on functionalization of compounds of biological origin broadening their application range. The substantial increase of MEF-based plants installed in industries worldwide suggests its straightforward application for waste recovery. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Exploiting relational database technology in a GIS

    Science.gov (United States)

    Batty, Peter

    1992-05-01

    All systems for managing data face common problems such as backup, recovery, auditing, security, data integrity, and concurrent update. Other challenges include the ability to share data easily between applications and to distribute data across several computers, whereas continuing to manage the problems already mentioned. Geographic information systems are no exception, and need to tackle all these issues. Standard relational database-management systems (RDBMSs) provide many features to help solve the issues mentioned so far. This paper describes how the IBM geoManager product approaches these issues by storing all its geographic data in a standard RDBMS in order to take advantage of such features. Areas in which standard RDBMS functions need to be extended are highlighted, and the way in which geoManager does this is explained. The performance implications of storing all data in the relational database are discussed. An important distinction is made between the storage and management of geographic data and the manipulation and analysis of geographic data, which needs to be made when considering the applicability of relational database technology to GIS.

  4. Resonant Magnetic Field Sensors Based On MEMS Technology

    Directory of Open Access Journals (Sweden)

    Elías Manjarrez

    2009-09-01

    Full Text Available Microelectromechanical systems (MEMS technology allows the integration of magnetic field sensors with electronic components, which presents important advantages such as small size, light weight, minimum power consumption, low cost, better sensitivity and high resolution. We present a discussion and review of resonant magnetic field sensors based on MEMS technology. In practice, these sensors exploit the Lorentz force in order to detect external magnetic fields through the displacement of resonant structures, which are measured with optical, capacitive, and piezoresistive sensing techniques. From these, the optical sensing presents immunity to electromagnetic interference (EMI and reduces the read-out electronic complexity. Moreover, piezoresistive sensing requires an easy fabrication process as well as a standard packaging. A description of the operation mechanisms, advantages and drawbacks of each sensor is considered. MEMS magnetic field sensors are a potential alternative for numerous applications, including the automotive industry, military, medical, telecommunications, oceanographic, spatial, and environment science. In addition, future markets will need the development of several sensors on a single chip for measuring different parameters such as the magnetic field, pressure, temperature and acceleration.

  5. Resonant Magnetic Field Sensors Based On MEMS Technology

    Science.gov (United States)

    Herrera-May, Agustín L.; Aguilera-Cortés, Luz A.; García-Ramírez, Pedro J.; Manjarrez, Elías

    2009-01-01

    Microelectromechanical systems (MEMS) technology allows the integration of magnetic field sensors with electronic components, which presents important advantages such as small size, light weight, minimum power consumption, low cost, better sensitivity and high resolution. We present a discussion and review of resonant magnetic field sensors based on MEMS technology. In practice, these sensors exploit the Lorentz force in order to detect external magnetic fields through the displacement of resonant structures, which are measured with optical, capacitive, and piezoresistive sensing techniques. From these, the optical sensing presents immunity to electromagnetic interference (EMI) and reduces the read-out electronic complexity. Moreover, piezoresistive sensing requires an easy fabrication process as well as a standard packaging. A description of the operation mechanisms, advantages and drawbacks of each sensor is considered. MEMS magnetic field sensors are a potential alternative for numerous applications, including the automotive industry, military, medical, telecommunications, oceanographic, spatial, and environment science. In addition, future markets will need the development of several sensors on a single chip for measuring different parameters such as the magnetic field, pressure, temperature and acceleration. PMID:22408480

  6. Resonant Magnetic Field Sensors Based On MEMS Technology.

    Science.gov (United States)

    Herrera-May, Agustín L; Aguilera-Cortés, Luz A; García-Ramírez, Pedro J; Manjarrez, Elías

    2009-01-01

    Microelectromechanical systems (MEMS) technology allows the integration of magnetic field sensors with electronic components, which presents important advantages such as small size, light weight, minimum power consumption, low cost, better sensitivity and high resolution. We present a discussion and review of resonant magnetic field sensors based on MEMS technology. In practice, these sensors exploit the Lorentz force in order to detect external magnetic fields through the displacement of resonant structures, which are measured with optical, capacitive, and piezoresistive sensing techniques. From these, the optical sensing presents immunity to electromagnetic interference (EMI) and reduces the read-out electronic complexity. Moreover, piezoresistive sensing requires an easy fabrication process as well as a standard packaging. A description of the operation mechanisms, advantages and drawbacks of each sensor is considered. MEMS magnetic field sensors are a potential alternative for numerous applications, including the automotive industry, military, medical, telecommunications, oceanographic, spatial, and environment science. In addition, future markets will need the development of several sensors on a single chip for measuring different parameters such as the magnetic field, pressure, temperature and acceleration.

  7. Identifying and Assessing Life-Cycle-Related Critical Technology Elements (CTEs) for Technology Readiness Assessments (TRAs)

    National Research Council Canada - National Science Library

    Mandelbaum, Jay

    2006-01-01

    .... Because these technologies are not emphasized in the current Technology Readiness Assessment (TRA) process this document is intended to improve the focus on life-cycle-related technologies in TRAs...

  8. [Application of microwave irradiation technology to the field of pharmaceutics].

    Science.gov (United States)

    Zhang, Xue-Bing; Shi, Nian-Qiu; Yang, Zhi-Qiang; Wang, Xing-Lin

    2014-03-01

    Microwaves can be directly transformed into heat inside materials because of their ability of penetrating into any substance. The degree that materials are heated depends on their dielectric properties. Materials with high dielectric loss are more easily to reach a resonant state by microwaves field, then microwaves can be absorbed efficiently. Microwave irradiation technique with the unique heating mechanisms could induce drug-polymer interaction and change the properties of dissolution. Many benefits such as improving product quality, increasing energy efficiency and reducing times can be obtained by microwaves. This paper summarized characteristics of the microwave irradiation technique, new preparation techniques and formulation process in pharmaceutical industry by microwave irradiation technology. The microwave technology provides a new clue for heating and drying in the field of pharmaceutics.

  9. IAEA programme in the field of radiation technology

    Science.gov (United States)

    Chmielewski, Andrzej G.; Haji-Saeid, Mohammad

    2005-07-01

    Radiation technologies applying gamma sources and electron accelerators for material modification are well-established processes. There are over 160 gamma industrial irradiators and 1300 electron industrial accelerators in operation worldwide. A new advancement in the field of radiation sources engineering is the development of high power direct e-/X conversion sources based on electron accelerators. Technologies to be developed beside environmental applications could be nanomaterials, structure engineered materials (sorbents, composites, ordered polymers, etc.) and natural polymers' processing. New products based on radiation-processed polysaccharides have already been commercialised in many countries of the East Asia and Pacific Region, especially in those being rich in natural polymers. Very important and promising applications concern environmental protection-radiation technology, being a clean and environment friendly process, helps to curb pollutants' emission as well. Industrial plants for flue gas treatment have been constructed in Poland and China. The pilot plant in Bulgaria using this technology has just started its operation. The Polish plant is equipped with accelerators of over 1 MW power, a breakthrough in radiation technology application. The industrial plant for wastewater treatment is under development in Korea and a pilot plant for sewage sludge irradiation has been in operation in India for many years. Due to recent developments, the Agency has restructured its programme and organized a Technical Meeting (TM) on "Emerging Applications of Radiation Technology for the 21st Century" at its Headquarters in Vienna, Austria, in April 2003, to review the present situation and possible developments of radiation technology to contribute to a sustainable development. This meeting provided the basic input to launch others in the most important fields of radiation technology applications: "Advances in Radiation Chemistry of Polymers" (Notre Dame, USA

  10. IAEA programme in the field of radiation technology

    International Nuclear Information System (INIS)

    Chmielewski, Andrzej G.; Haji-Saeid, Mohammad

    2005-01-01

    Radiation technologies applying gamma sources and electron accelerators for material modification are well-established processes. There are over 160 gamma industrial irradiators and 1300 electron industrial accelerators in operation worldwide. A new advancement in the field of radiation sources engineering is the development of high power direct e - /X conversion sources based on electron accelerators. Technologies to be developed beside environmental applications could be nanomaterials, structure engineered materials (sorbents, composites, ordered polymers, etc.) and natural polymers' processing. New products based on radiation-processed polysaccharides have already been commercialised in many countries of the East Asia and Pacific Region, especially in those being rich in natural polymers. Very important and promising applications concern environmental protection-radiation technology, being a clean and environment friendly process, helps to curb pollutants' emission as well. Industrial plants for flue gas treatment have been constructed in Poland and China. The pilot plant in Bulgaria using this technology has just started its operation. The Polish plant is equipped with accelerators of over 1 MW power, a breakthrough in radiation technology application. The industrial plant for wastewater treatment is under development in Korea and a pilot plant for sewage sludge irradiation has been in operation in India for many years. Due to recent developments, the Agency has restructured its programme and organized a Technical Meeting (TM) on 'Emerging Applications of Radiation Technology for the 21st Century' at its Headquarters in Vienna, Austria, in April 2003, to review the present situation and possible developments of radiation technology to contribute to a sustainable development. This meeting provided the basic input to launch others in the most important fields of radiation technology applications: 'Advances in Radiation Chemistry of Polymers' (Notre Dame, USA

  11. The Science and Technology Case for High-Field Fusion

    Science.gov (United States)

    Whyte, D.

    2017-10-01

    This review will focus on the origin, development and new opportunities of a strategy for fusion energy based on the high-field approach. In this approach confinement devices are designed at the maximum possible value of vacuum magnetic field strength, B. The integrated electrical, mechanical and cooling engineering challenges of high-field on coil (Bcoil) , large-bore electromagnets are examined for both copper and superconductor materials. These engineering challenges are confronted because of the profound science advantages provided by high-B, which are derived and reviewed: high fusion power density, B4, in compact devices, thermonuclear plasmas with significant stability margin, and, in tokamaks, access to higher plasma density. Two distinct high-field strategies emerged in the 1980's. The first was compact, cryogenically-cooled copper devices (BPX, IGNITOR, FIRE) with Bcoil>20 T, while the second was a large-volume, Nb3Sn superconductor device with Bcoil Copper Oxide (REBCO) superconductor-based devices with Bcoil >20 T; a strategy that essentially combines the best components of the two previous strategies. Recent activities examining the technology and science implications of this new strategy are reviewed. On the technology side, REBCO superconductors have now been used to produce Bcoil>40 T in small-bore electromagnets, enabled by rapid progress in manufactured REBCO conductor quality, coil modularity and flexible operating temperature range. Specific tokamak designs, over a range of aspect ratios, have been developed to take scientific advantage of these features in various ways, and will be described.

  12. Consistency relation for cosmic magnetic fields

    DEFF Research Database (Denmark)

    Jain, R. K.; Sloth, M. S.

    2012-01-01

    If cosmic magnetic fields are indeed produced during inflation, they are likely to be correlated with the scalar metric perturbations that are responsible for the cosmic microwave background anisotropies and large scale structure. Within an archetypical model of inflationary magnetogenesis, we show...... to be extremely useful to test some recent calculations in the literature. Apart from primordial non-Gaussianity induced by the curvature perturbations, such a cross correlation might provide a new observational probe of inflation and can in principle reveal the primordial nature of cosmic magnetic fields. DOI...

  13. The Savannah River Environmental Technology Field Test Platform: Phase 2

    International Nuclear Information System (INIS)

    Rossabi, J.; Riha, B.D.; Eddy-Dilek, C.A.; Pemberton, B.E.; May, C.P.; Jarosch, T.R.; Looney, B.B.; Raymond, R.

    1995-01-01

    The principal goal in the development of new technologies for environmental monitoring and characterization is transferring them to organizations and individuals for use in site assessment and compliance monitoring. The DOE complex has devised several strategies to facilitate this transfer including joint research projects between private industries and government laboratories or universities (CRADAs) and streamlined licensing procedures. One strategy that has been under-utilized is a planned sequence gradually moving from laboratory development and field demonstration to long term evaluation and onsite use. Industrial partnership and commercial production can be initiated at any step based on the performance, market, user needs, and costs associated with the technology. This approach allows use of the technology by onsite groups for compliance monitoring tasks (e.g. Environmental Restoration and Waste Management), while following parallel research and development organizations the opportunity to evaluate the long term performance and to make modifications or improvements to the technology. This probationary period also provides regulatory organizations, potential industrial partners, and potential users with the opportunity to evaluate the technology's performance and its utility for implementation in environmental characterization and monitoring programs

  14. General relativity invariance and string field theory

    International Nuclear Information System (INIS)

    Aref'eva, I.Ya.; Volovich, I.V.

    1987-04-01

    The general covariance principle in the string field theory is considered. The algebraic properties of the string Lie derivative are discussed. The string vielbein and spin connection are introduced and an action invariant under general co-ordinate transformation is proposed. (author). 18 refs

  15. Hydrogen fuel cell engines and related technologies

    Science.gov (United States)

    2001-12-01

    The manual documents the first training course developed on the use of hydrogen fuel cells in transportation. The manual contains eleven modules covering hydrogen properties, use and safety; fuel cell technology and its systems, fuel cell engine desi...

  16. Educational Technology -- Computer-Related and People-Related.

    Science.gov (United States)

    Carter, Launor F.

    Two aspects of educational technology are considered. The first involves the development of educational technology highly dependent on computer equipment, and the development of a computer assisted instruction language called Programmed Language for Interactive Teaching (PLANIT). The second aspect involves the development of educational technology…

  17. 40 CFR 230.74 - Actions related to technology.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Actions related to technology. 230.74 Section 230.74 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING SECTION... Minimize Adverse Effects § 230.74 Actions related to technology. Discharge technology should be adapted to...

  18. Predominance and Role of Myanmar Women in Nuclear Related Fields

    International Nuclear Information System (INIS)

    Nyein, T.N.; Tharn Diang, A.

    2015-01-01

    This poster reflects the current and future endeavor of Myanmar women in nuclear science and technology related fields. Though Myanmar has not yet planned for nuclear power program, but strongly interested in nuclear energy due to rising awareness of future energy demand. The DAE is central in conducting career development, (E&T) as well as (R&D) in nuclear application fields, cooperating with the international societies and local institutions. According to survey, the status of women power in administration, rule and regulation sector is 62%, that in research, 34%, that in radiation application and protection, 57% and that in education and training, 46%. The current trend indicates that female are perceptibly wider participants in DAE. Qualified personnel and sufficient human resource are of essence in nuclear engineering and science. Thus, so as not to face the shortage of personnel, we aim to promote the interest of young generation ,to make competent and efficient manpower based on current and future national nuclear programmes since the parliament agreed on decision for acceleration of human resource development in nuclear field in order to urge government on June 23, 2014. Moreover, activities should be undertaken by the government and associated departments to persuade the interest of secondary and high school level student, to enhance academic programme for nuclear engineering and other sciences in private and government technical schools and training centre, to develop infrastructure according to near future nuclear programs, to enlighten people the benefits of nuclear science and technology and applications, and to raise public awareness of zero carbon emitting energy resource. These potential efforts should be extended, upgraded and encouraged not only by government, stakeholders and also by the help of nuclear network of other international organizations, since larger numbers of WiN Myanmar are required to access practically and globally integrated

  19. People in a Technology Driven Future: On the Social Relations of New Information Technologies.

    Science.gov (United States)

    Ngwenyama, Ojelanki K.

    This keynote address examines the social relations of information technology in the future. Examples of the recent history of technology related to transportation, printing, and nuclear energy are presented. Some troubling examples of the social relations of new information technologies that are emerging on a global scale are then discussed,…

  20. Technological learning through international collaboration: Lessons from the field

    Science.gov (United States)

    Wood, Danielle; Weigel, Annalisa

    2013-02-01

    Countries on every continent are making new or renewed commitments to domestic satellite programs. These programs have the potential to address national needs by enhancing access to information, improving infrastructure and providing inspiration to the public. How do countries without local expertise in space technology begin a new satellite program? What is the role of international collaboration in supporting the efforts of a new space fairing country? This paper explores such questions by highlighting outputs from intensive field work in Africa and Asia. Specifically, the study explores case studies of early space activity in these countries to search for lessons about the management of a young space program. The observations from field work are compared to ideas from scholarly literature on technological learning. The findings are organized using principles from systems architecture. The paper presents a model that captures many of the influences and strategic decision areas for a collaborative satellite development project. The paper also highlights the growth of capability among African countries in the area of satellite technology.

  1. ENERGY SMART SCHOOLS - APPLIED RESEARCH, FIELD TESTING, AND TECHNOLOGY INTEGRATION

    Energy Technology Data Exchange (ETDEWEB)

    Kate Burke

    2004-01-01

    This multi-state collaborative project will coordinate federal, state, and private sector resources and high-priority school-related energy research under a comprehensive initiative that includes tasks that increase adoption of advanced energy efficiency high-performance technologies in both renovation of existing schools and building new ones; educate and inform school administrators, architects, engineers, and manufacturers nationwide as to the energy, economic, and environmental benefits of energy efficiency technologies; and improve the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in schools.

  2. Stream conversion technology and gas condensate field development

    Energy Technology Data Exchange (ETDEWEB)

    Kuntadi, Arif

    2012-07-01

    depletion PVT experiments using a detailed-EOS model. Delumping is performed phase-wise at the well-connection level, for each time step of the reservoir simulator. For gas injection processes, the amount of injection gas is estimated from stream information and, accordingly, removed from the stream before applying the phase-specific pressure-dependent split factors. We propose another conversion procedure to convert one fluid model stream to another fluid model stream in which the heaviest fractions have different component grouping. This procedure is called the two-step gamma distribution conversion. It consists of two steps: (1) splitting the heavy component into single carbon number (SCN) characterization and (2) lumping from the SCN characterization model to the destination fluid model stream. SCN characterization has been proposed as a generic accounting characterization that contains a SCN component up to C80 for a normal reservoir fluid and C200 for a heavy reservoir fluid. To obtain the best result, it is recommended that this conversion be performed phase-wise at the well-connection level. The implementation of the three proposed conversion methods has been demonstrated using a hypothetical integrated petroleum asset model. We believe that the combination of our proposed methods will provide important advances in the integrated asset modeling. The second section of this thesis addresses some key reservoir and production issues related to gas and condensate recovery from Khuff reservoirs in the Middle East - namely Ghawar Khuff, North Field and South Pars. These fields represent somewhere between 1,000 and 2,000 Tcf initial gas in place, with 30 to 70 billion barrels of condensate in place. We apply engineering methods and reservoir simulation to quantify the expected performance of Khuff gas condensate fields for a realistic range of geologic description, petrophysical and fluid properties, and production facilities based on published information. We review key

  3. Utilization of Near Field Communication Technology for Loyalty Management

    Directory of Open Access Journals (Sweden)

    Ferina Ferdianti

    2013-11-01

    Full Text Available Near Field Communication (NFC is one of wireless technology developed at this time. We can use a mobile phone to do many transactions with NFC. Mobile developments have created to provide convenience for users in all aspects. However, at this time the function of NFC just limited for payment and micropayment. Beside it, there are assets that support to increase sales with attention of loyality management system. In this system, discounts or prizes are given based on data mining for every transaction costumers. Loyalty management has three concept, those are Frequency, Recency and Quantity. The goals are minimizing the cost, making purchase process faster, and managing data obtained through the NFC technology more simple. The result of this paper is the procedure to use data mining of NFC for loyalty management and system design using Unified Modeling Language approach.

  4. Field Demonstraton of Existing Microhole Coiled Tubing Rig (MCTR) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Kent Perry; Samih Batarseh; Sheriff Gowelly; Thomas Hayes

    2006-05-09

    The performance of an advanced Microhole Coiled Tubing Rig (MCTR) has been measured in the field during the drilling of 25 test wells in the Niobrara formation of Western Kansas and Eastern Colorado. The coiled tubing (CT) rig designed, built and operated by Advanced Drilling Technologies (ADT), was documented in its performance by GTI staff in the course of drilling wells ranging in depth from 500 to nearly 3,000 feet. Access to well sites in the Niobrara for documenting CT rig performance was provided by Rosewood Resources of Arlington, VA. The ADT CT rig was selected for field performance evaluation because it is one of the most advanced commercial CT rig designs that demonstrate a high degree of process integration and ease of set-up and operation. Employing an information collection protocol, data was collected from the ADT CT rig during 25 drilling events that encompassed a wide range of depths and drilling conditions in the Niobrara. Information collected included time-function data, selected parametric information indicating CT rig operational conditions, staffing levels, and field observations of the CT rig in each phase of operation, from rig up to rig down. The data obtained in this field evaluation indicates that the ADT CT rig exhibited excellent performance in the drilling and completion of more than 25 wells in the Niobrara under varied drilling depths and formation conditions. In the majority of the 25 project well drilling events, ROP values ranged between 300 and 620 feet per hour. For all but the lowest 2 wells, ROP values averaged approximately 400 feet per hour, representing an excellent drilling capability. Most wells of depths between 500 and 2,000 feet were drilled at a total functional rig time of less than 16 hours; for wells as deep at 2,500 to 3,000 feet, the total rig time for the CT unit is usually well under one day. About 40-55 percent of the functional rig time is divided evenly between drilling and casing/cementing. The balance of

  5. Mediated Effects of Technology Competencies and Experiences on Relations among Attitudes Towards Technology Use, Technology Ownership, and Self Efficacy about Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Yerdelen-Damar, Sevda; Boz, Yezdan; Aydın-Günbatar, Sevgi

    2017-08-01

    This study examined the relations of preservice science teachers' attitudes towards technology use, technology ownership, technology competencies, and experiences to their self-efficacy beliefs about technological pedagogical content knowledge (TPACK). The present study also investigated interrelations among preservice teachers' attitudes towards technology use, technology ownership, technology competencies, and experiences. The participants of study were 665 elementary preservice science teachers (467 females, 198 males) from 7 colleges in Turkey. The proposed model based on educational technology literature was tested using structural equation modeling. The model testing results revealed that preservice teachers' technology competencies and experiences mediated the relation of technology ownership to their TPACK self efficacy beliefs. The direct relation of their possession of technology to their TPACK self efficacy beliefs was insignificant while the indirect relation through their technology competencies and experiences was significant. The results also indicated there were significant direct effects of preservice teachers' attitudes towards technology use, technology competencies, and experiences on their TPACK self efficacy beliefs.

  6. The Media of Relativity: Einstein and Telecommunications Technologies.

    Science.gov (United States)

    Canales, Jimena

    2015-07-01

    How are fundamental constants, such as "c" for the speed of light, related to the technological environments that produce them? Relativistic cosmology, developed first by Albert Einstein, depended on military and commercial innovations in telecommunications. Prominent physicists (Hans Reichenbach, Max Born, Paul Langevin, Louis de Broglie, and Léon Brillouin, among others) worked in radio units during WWI and incorporated battlefield lessons into their research. Relativity physicists, working at the intersection of physics and optics by investigating light and electricity, responded to new challenges by developing a novel scientific framework. Ideas about lengths and solid bodies were overhauled because the old Newtonian mechanics assumed the possibility of "instantaneous signaling at a distance." Einstein's universe, where time and space dilated, where the shortest path between two points was often curved and non-Euclidean, followed the rules of electromagnetic "signal" transmission. For these scientists, light's constant speed in the absence of a gravitational field-a fundamental tenet of Einstein's theory-was a lesson derived from communication technologies.

  7. Caring communications: how technology enhances interpersonal relations, Part II.

    Science.gov (United States)

    Simpson, Roy L

    2008-01-01

    Part I of this 2-part series about technology's role in interpersonal communications examined how humans interact; proposed a caring theory of communication, collaboration, and conflict resolution; and delineated ways that technology--in general--supports this carative model of interpersonal relations. Part II will examine the barriers to adoption of carative technologies, describe the core capabilities required to overcome them, and discuss specific technologies that can support carative interpersonal relationships.

  8. Field Trial of an Aerosol-Based Enclosure Sealing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Harrington, Curtis [Univ. of California, Davis, CA (United States); Springer, David [Univ. of California, Davis, CA (United States)

    2015-09-01

    This report presents the results from several demonstrations of a new method for sealing building envelope air leaks using an aerosol sealing process developed by the Western Cooling Efficiency Center at UC Davis. The process involves pressurizing a building while applying an aerosol sealant to the interior. As air escapes through leaks in the building envelope, the aerosol particles are transported to the leaks where they collect and form a seal that blocks the leak. Standard blower door technology is used to facilitate the building pressurization, which allows the installer to track the sealing progress during the installation and automatically verify the final building tightness. Each aerosol envelope sealing installation was performed after drywall was installed and taped, and the process did not appear to interrupt the construction schedule or interfere with other trades working in the homes. The labor needed to physically seal bulk air leaks in typical construction will not be replaced by this technology. However, this technology is capable of bringing the air leakage of a building that was built with standard construction techniques and HERS-verified sealing down to levels that would meet DOE Zero Energy Ready Homes program requirements. When a developer is striving to meet a tighter envelope leakage specification, this technology could greatly reduce the cost to achieve that goal by providing a simple and relatively low cost method for reducing the air leakage of a building envelope with little to no change in their common building practices.

  9. Advanced Channeling Technologies in Plasma and Laser Fields

    Science.gov (United States)

    Dabagov, Sultan B.

    2018-01-01

    Channeling is the phenomenon well known in the world mostly related to the motion of the beams of charged particles in aligned crystals. However, recent studies have shown the feasibility of channeling phenomenology application for description of other various mechanisms of interaction of charged as well as neutral particle beams in solids, plasmas and electromagnetic fields covering the research fields from crystal based undulators, collimators and accelerators to capillary based X-ray and neutron optical elements. This brief review is devoted to the status of channeling-based researches at different centers within international and national collaborations. Present and future possible developments in channeling tools applied to electron interactions in strong plasma and laser fields will be analyzed.

  10. Cyborg intentionality : rethinking the phenomenology of human- technology relations

    NARCIS (Netherlands)

    Verbeek, Peter P.C.C.

    2008-01-01

    This article investigates the types of intentionality involved in human-technology relations. It aims to augment Don Ihde's analysis of the relations between human beings and technological artifacts, by analyzing a number of concrete examples at the limits of Ihde's analysis. The article

  11. Experiences of using mobile technologies and virtual field tours in Physical Geography: implications for hydrology education

    Directory of Open Access Journals (Sweden)

    D. G. Kingston

    2012-05-01

    Full Text Available Education in hydrology is changing rapidly due to diversification of students, emergent major scientific and practical challenges that our discipline must engage with, shifting pedagogic ideas and higher education environments, the need for students to develop new discipline specific and transferrable skills, and the advent of innovative technologies for learning and teaching. This paper focuses on new technologies in the context of learning and teaching in Physical Geography and reflects on the implications of our experiences for education in hydrology. We evaluate the experience of designing and trialling novel mobile technology-based field exercises and a virtual field tour for a Year 1 undergraduate Physical Geography module at a UK university. The new exercises are based on using and obtaining spatial data, operation of meteorological equipment (explained using an interactive DVD, and include introductions to global positioning systems (GPS and geographical information systems (GIS. The technology and exercises were well received in a pilot study and subsequent rolling-out to the full student cohort (∼150 students. A statistically significant improvement in marks was observed following the redesign. Although the students enjoyed using mobile technology, the increased interactivity and opportunity for peer learning were considered to be the primary benefits by students. This is reinforced further by student preference for the new interactive virtual field tour over the previous "show-and-tell" field exercise. Despite the new exercises having many advantages, exercise development was not trivial due to the high start-up costs, the need for provision of sufficient technical support and the relative difficulty of making year-to-year changes (to the virtual field tour in particular. Our experiences are highly relevant to the implementation of novel learning and teaching technologies in hydrology education.

  12. Indefinite-metric quantum field theory of general relativity, 2

    International Nuclear Information System (INIS)

    Nakanishi, Noboru

    1978-01-01

    The canonical commutation relations are analyzed in detail in the manifestly covariant quantum field theory of general relativity proposed previously. It is explicitly proved that the BRS charge is indeed the generator of the BRS transformation both in the Landau gauge and in the non-Landau one. The equivalence between the field equations and the Heisenberg equations is confirmed. (author)

  13. Enhancing Virtual Teams: Relations vs. Communication Technology

    NARCIS (Netherlands)

    Smagt, A.G.M. van der

    2000-01-01

    Are virtual teams an adequate alternative for co-located (face-to-face) teams in case of complex, equivocal relations? Business scientists are predominantly pessimistic. They argue that “rich” media – those that transmit higher levels of nonverbal cues – are necessary in these circumstances. In this

  14. Technology diffusion of energy-related products in residential markets

    Energy Technology Data Exchange (ETDEWEB)

    Davis, L.J.; Bruneau, C.L.

    1987-05-01

    Acceptance of energy-related technologies by end residential consumers, manufacturers of energy-related products, and other influential intermediate markets such as builders will influence the potential for market penetration of innovative energy-related technologies developed by the Department of Energy, Office of Building and Community Systems (OBCS). In this report, Pacific Northwest Laboratory reviewed the available information on technology adoption, diffusion, and decision-making processes to provide OBCS with a background and understanding of the type of research that has previously been conducted on this topic. Insight was gained as to the potential decision-making criteria and motivating factors that influence the decision-maker(s) selection of new technologies, and some of the barriers to technology adoption faced by potential markets for OBCS technologies.

  15. Overview of DOE's field screening technology development activities

    International Nuclear Information System (INIS)

    Frank, C.W.; Anderson, T.D.; Cooley, C.R.; Hain, K.E.; Lien, S.C.T.; Erickson, M.D.

    1991-01-01

    The Department of Energy (DOE) has recently created the Office of Environmental Restoration and Waste Management, into which it consolidated those activities. Within this new organization, the Office of Technology Development (OTD) is responsible for research, development, demonstration, testing, and evaluation (RDDT ampersand E) activities aimed at meeting DOE cleanup goals, while minimizing cost and risk. Site characterization using traditional drilling, sampling, and analytical methods comprises a significant part of the environmental restoration efforts in terms of both cost and time to accomplish. It can also be invasive and create additional pathways for spread of contaminants. Consequently, DOE is focusing on site characterization as one of the areas in which significant technological advances are possible which will decrease cost, reduce risk, and shorten schedules for achieving restoration goals. DOE is investing considerably in R ampersand D and demonstration activities which will improve the abilities to screen chemical, radiological, and physical parameters in the field. This paper presents an overview of the program objectives and status and reviews some of the projects which are currently underway in the area. 1 ref

  16. [Arthropod diversity in leafy vegetable field and sampling technology].

    Science.gov (United States)

    Hou, Y; You, M; Pang, X; Liang, G

    2000-10-01

    Two sampling units (plant and quadrat) and two sampling methods (random and fixed) were adopted to compare the variation degree of the diversity of arthropod communities in different chinese cabbage fields. The results show that a lower variation degree was found when the random sampling method was adopted with quadrat (0.11 m2) as sampling unit at seedling stage and with plant as sampling unit from growing to mature stage. The community diversity was relatively steady, when the critical number of samples was more than 12 quatrats (0.11 m2) at seedling stage, 30 plants in growing period, and 20 plants at mature stage. The optimum sampling unit, sampling method and sampling number of arthropod diversity in leafy vegetable field were also determined.

  17. Mean Field Games for Stochastic Growth with Relative Utility

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Minyi, E-mail: mhuang@math.carleton.ca [Carleton University, School of Mathematics and Statistics (Canada); Nguyen, Son Luu, E-mail: sonluu.nguyen@upr.edu [University of Puerto Rico, Department of Mathematics (United States)

    2016-12-15

    This paper considers continuous time stochastic growth-consumption optimization in a mean field game setting. The individual capital stock evolution is determined by a Cobb–Douglas production function, consumption and stochastic depreciation. The individual utility functional combines an own utility and a relative utility with respect to the population. The use of the relative utility reflects human psychology, leading to a natural pattern of mean field interaction. The fixed point equation of the mean field game is derived with the aid of some ordinary differential equations. Due to the relative utility interaction, our performance analysis depends on some ratio based approximation error estimate.

  18. How to Make Your Relationship Work? Aesthetic Relations with Technology

    NARCIS (Netherlands)

    Pols, Jeannette

    2017-01-01

    Discussing the workings of technology in care as aesthetic rather than as ethical or epistemological interventions focusses on how technologies engage in and change relations between those involved. Such an aesthetic study opens up a repertoire to address values that are abundant in care, but are as

  19. Affect and Acceptability: Exploring Teachers' Technology-Related Risk Perceptions

    Science.gov (United States)

    Howard, Sarah K.

    2011-01-01

    Educational change, such as technology integration, involves risk. Teachers are encouraged to "take risks", but what risks they are asked to take and how do they perceive these risks? Developing an understanding of teachers' technology-related risk perceptions can help explain their choices and behaviours. This paper presents a way to…

  20. Adoption of nutrition and environment-related technologies by ...

    African Journals Online (AJOL)

    However, implementation strategies could have affected adoption of technologies along the line. This study assessed adoption of nutrition and environment-related technologies/information (N&E) among women under phases of IFAD's interventions on cassava in south-east Nigeria. Four (4) out of eight (8) States in ...

  1. How to make your relationship work? Aesthetic relations with technology

    NARCIS (Netherlands)

    Pols, J.

    Discussing the workings of technology in care as aesthetic rather than as ethical or epistemological interventions focusses on how technologies engage in and change relations between those involved. Such an aesthetic study opens up a repertoire to address values that are abundant in care, but are as

  2. Postphenomenological Investigations: Essays on Human-Technology Relations

    NARCIS (Netherlands)

    Rosenberger, Robert; Verbeek, Peter P.C.C.

    2015-01-01

    Postphenomenological Investigations: Essays on Human–Technology Relations provides an introduction to the school of thought called postphenomenology and showcases projects at the cutting edge of this perspective. Postphenomenology presents a unique blend of insights from the philosophical traditions

  3. Proceedings of the 2. IASTED international conference on advanced technology in the environmental field

    International Nuclear Information System (INIS)

    Ubertini, L.

    2006-01-01

    This international conference provided a forum for representatives from academic institutions, government agencies, and industries to discuss emerging technologies in the environmental field. Recent developments in physico-chemical remediation technologies were reviewed, as well as strategies related to waste water treatment in urban and coastal regions. Advances in bio-plastics and bio-hydrogen production were also discussed along with various bioremediation techniques. Strategies related to urban drainage and wetland management were presented together with issues related to energy efficiency and ecological sustainability. The conference was divided into 6 sections: (1) wastewater treatment and reuse; (2) biotechnology, bioremediation and biomass; (3) integrated water resources management; (4) alternative energy systems; (5) decision support tools; and (6) groundwater and soil remediation. The conference featured 48 presentations, of which 9 have been catalogued separately for inclusion in this database. refs., tabs., figs

  4. Magnetic fields, special relativity and potential theory elementary electromagnetic theory

    CERN Document Server

    Chirgwin, B H; Kilmister, C W

    1972-01-01

    Magnetic Fields, Special Relativity and Potential Theory is an introduction to electromagnetism, special relativity, and potential theory, with emphasis on the magnetic field of steady currents (magnetostatics). Topics covered range from the origin of the magnetic field and the magnetostatic scalar potential to magnetization, electromagnetic induction and magnetic energy, and the displacement current and Maxwell's equations. This volume is comprised of five chapters and begins with an overview of magnetostatics, followed by a chapter on the methods of solving potential problems drawn from elec

  5. Mediated Effects of Technology Competencies and Experiences on Relations among Attitudes towards Technology Use, Technology Ownership, and Self Efficacy about Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Yerdelen-Damar, Sevda; Boz, Yezdan; Aydin-Günbatar, Sevgi

    2017-01-01

    This study examined the relations of preservice science teachers' attitudes towards technology use, technology ownership, technology competencies, and experiences to their self-efficacy beliefs about technological pedagogical content knowledge (TPACK). The present study also investigated interrelations among preservice teachers' attitudes towards…

  6. Introduction to the field of emerging technology management

    NARCIS (Netherlands)

    Groen, Arend J.; Walsh, Steven Thomas

    2013-01-01

    Many see emerging technologies as a solution vector for the global challenges of the twenty-first century. Today's emerging technologies include: computational sciences; nanotechnology; micro-electro-mechanical systems (MEMS); bio-fuels; mobile technologies and a host of others. Yet an adequate

  7. High magnetic field ohmically decoupled non-contact technology

    Science.gov (United States)

    Wilgen, John [Oak Ridge, TN; Kisner, Roger [Knoxville, TN; Ludtka, Gerard [Oak Ridge, TN; Ludtka, Gail [Oak Ridge, TN; Jaramillo, Roger [Knoxville, TN

    2009-05-19

    Methods and apparatus are described for high magnetic field ohmically decoupled non-contact treatment of conductive materials in a high magnetic field. A method includes applying a high magnetic field to at least a portion of a conductive material; and applying an inductive magnetic field to at least a fraction of the conductive material to induce a surface current within the fraction of the conductive material, the surface current generating a substantially bi-directional force that defines a vibration. The high magnetic field and the inductive magnetic field are substantially confocal, the fraction of the conductive material is located within the portion of the conductive material and ohmic heating from the surface current is ohmically decoupled from the vibration. An apparatus includes a high magnetic field coil defining an applied high magnetic field; an inductive magnetic field coil coupled to the high magnetic field coil, the inductive magnetic field coil defining an applied inductive magnetic field; and a processing zone located within both the applied high magnetic field and the applied inductive magnetic field. The high magnetic field and the inductive magnetic field are substantially confocal, and ohmic heating of a conductive material located in the processing zone is ohmically decoupled from a vibration of the conductive material.

  8. ASSTC and field sensors: new technology for emergency care

    Science.gov (United States)

    Morrison, G. Wayne; Vo-Dinh, Tuan

    2000-05-01

    The US Army Medical Research and Material Command together with the US Marine Corps Combat Development Command sponsored the design and production of a far-forward, lightweight, small footprint, reconfigurable, highly mobile Advanced Surgical Suite for Trauma Casualties (ASSTC) to reduce combat casualties and morbidity. The KIA fraction has remained relatively constant over major wars and conflicts since the early 1900s. One third of the KIA perish after 10 minutes. ASSTC has the potential to dramatically lower this fraction by providing resuscitative care within a short period of wound infliction and not requiring long transport times to the caregivers. ASSTC is also unique in its capability to serve in multiple missions including humanitarian aid, infectious disease control, and disaster relief. Adding field sensor to ASSTC greatly enhances the capability of this highly mobile system to operate in many areas.

  9. Termiticide field test report: New termiticides & emerging technologies

    Science.gov (United States)

    Bradford M. Kard

    2000-01-01

    Testing at our nationwide field sites detemines the years-of-effectiveness of currently marketed and potentially new termiticides as treatments to soil under long-term field conditions. Several new termiticide candidates and formulations have been placed in the field during the past four years and will be reported on after they complete five years of testing.

  10. Web Development Technology-PHP. How It Is Related To Web Development Technology ASP.NET

    Directory of Open Access Journals (Sweden)

    Manya Sharma

    2015-01-01

    Full Text Available ABSTRACT This paper tells about the technologies used in PHP and how they are related to ASP.NET. The paper begin with the introduction of PHP defining what and how technologies has been used in development of User Complaint Web Application. How thistechnology is related to ASP.NET in features such as implementation functionality validation and proactive behavior involved in validating user input from the browser providing users feedback overall time consumed in development and maintenance.

  11. The Temperature - Magnetic Field Relation in Observed and Simulated Sunspots

    Science.gov (United States)

    Sobotka, Michal; Rezaei, Reza

    2017-12-01

    Observations of the relation between continuum intensity and magnetic field strength in sunspots have been made for nearly five decades. This work presents full-Stokes measurements of the full-split (g = 3) line Fe i 1564.85 nm with a spatial resolution of 0.5^'' obtained with the GREGOR Infrared Spectrograph in three large sunspots. The continuum intensity is corrected for instrumental scattered light, and the brightness temperature is calculated. Magnetic field strength and inclination are derived directly from the line split and the ratio of Stokes components. The continuum intensity (temperature) relations to the field strength are studied separately in the umbra, light bridges, and penumbra. The results are consistent with previous studies, and it was found that the scatter of values in the relations increases with increasing spatial resolution thanks to resolved fine structures. The observed relations show trends common for the umbra, light bridges, and the inner penumbra, while the outer penumbra has a weaker magnetic field than the inner penumbra at equal continuum intensities. This fact can be interpreted in terms of the interlocking comb magnetic structure of the penumbra. A comparison with data obtained from numerical simulations was made. The simulated data generally have a stronger magnetic field and a weaker continuum intensity than the observations, which may be explained by stray light and limited spatial resolution of the observations, and also by photometric inaccuracies of the simulations.

  12. Longitudinal Patent Analysis for Nanoscale Science and Engineering: Country, Institution and Technology Field

    International Nuclear Information System (INIS)

    Huang Zan; Chen Hsinchun; Yip, Alan; Ng, Gavin; Guo Fei; Chen Zhikai; Roco, Mihail C.

    2003-01-01

    Nanoscale science and engineering (NSE) and related areas have seen rapid growth in recent years. The speed and scope of development in the field have made it essential for researchers to be informed on the progress across different laboratories, companies, industries and countries. In this project, we experimented with several analysis and visualization techniques on NSE-related United States patent documents to support various knowledge tasks. This paper presents results on the basic analysis of nanotechnology patents between 1976 and 2002, content map analysis and citation network analysis. The data have been obtained on individual countries, institutions and technology fields. The top 10 countries with the largest number of nanotechnology patents are the United States, Japan, France, the United Kingdom, Taiwan, Korea, the Netherlands, Switzerland, Italy and Australia. The fastest growth in the last 5 years has been in chemical and pharmaceutical fields, followed by semiconductor devices. The results demonstrate potential of information-based discovery and visualization technologies to capture knowledge regarding nanotechnology performance, transfer of knowledge and trends of development through analyzing the patent documents

  13. 1992 yearbook of environmental and technology-related law

    International Nuclear Information System (INIS)

    Schroeder, M.

    1992-01-01

    The 1992 and sixth edition of this yearbook contains papers on environmental and technology-related law in the European Communities and the Federal Republic of Germany including among other things information on the latest jurisdiction by the European Court of Justice; insurability of environmental damage; scientific aspects of limit values. There are also treatises on non-German and comparative as well as international environmental and technology- related law which deal among other things with atomic and immission protection law and on harmonization and codification from a general point of view. Finally, some papers report on developments of national and European environmental and technology-related law. Three of the fifteen contributions have been abstracted separately. (HSCH) [de

  14. Toward a model for field-testing patient decision-support technologies: a qualitative field-testing study.

    NARCIS (Netherlands)

    Evans, R.; Elwyn, G.; Edwards, A.; Watson, E.; Austoker, J.; Grol, R.P.T.M.

    2007-01-01

    BACKGROUND: Field-testing is a quality assurance criterion in the development of patient decision-support technologies (PDSTs), as identified in the consensus statement of the International Patient Decision Aids Standards Collaboration. We incorporated field-testing into the development of a

  15. New business opportunity: Green field project with new technology

    Science.gov (United States)

    Lee, Seung Jae; Woo, Jong Hun; Shin, Jong Gye

    2014-06-01

    Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

  16. New business opportunity: Green field project with new technology

    Directory of Open Access Journals (Sweden)

    Seung Jae Lee

    2014-06-01

    Full Text Available Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation

  17. EU DIRECTIVES IN THE FIELD OF COPYRIGHT AND RELATED RIGHTS

    Directory of Open Access Journals (Sweden)

    Ana-Maria MARINESCU

    2015-07-01

    Full Text Available The aim of this article is to underline the evolution and the importance of the European Directives in the field of copyright and related rights, their contribution to the development of the law and the national implementation, namely their transposition into Romanian Law no. 8/1996 on copyright and related rights. For this purpose, the article will analyze the historical evolution of the European Directives in the field of copyright and related rights and their most important dispositions. Given the wide range of subject matter with which it is concerned, the European Directives in the field of copyright and related rights address to enforcement, protection of databases, protection of computer programs, resale right, satellite and cable, term of protection, rental and lending rights, copyright and related rights in the information society, orphan works and management of copyright and related rights. Taking into account the wild range of subjects that European Directives in the field of copyright and related rights address, it is important to observe the permanent interest of the European legislator on the harmonization of the law on copyright and related rights. In this way, the result was the adoption of 7 directives in a 10-year interval between 1991 and 2001, and of 4 directives, including the one for the modification of the Directive on the term of protection, also in a 10-year interval between 2004 and 2014. Despite the extensive process of harmonization, copyright law in the Member States of the European Union is still largely linked to geographical boundaries of sovereign states.

  18. EU Foreign Relations Law as a Field of Scholarship

    NARCIS (Netherlands)

    Larik, J.E.

    2017-01-01

    EU external relations law is a doubly peculiar field of scholarship that has attracted significant scholarly attention over the last several decades. It is both part of EU law—considered a "new legal order" distinct from international law—and it is concerned with the European Union as a global

  19. Consistency relation for the Lorentz invariant single-field inflation

    International Nuclear Information System (INIS)

    Huang, Qing-Guo

    2010-01-01

    In this paper we compute the sizes of equilateral and orthogonal shape bispectrum for the general Lorentz invariant single-field inflation. The stability of field theory implies a non-negative square of sound speed which leads to a consistency relation between the sizes of orthogonal and equilateral shape bispectrum, namely f NL orth. ≤ −0.054f NL equil. . In particular, for the single-field Dirac-Born-Infeld (DBI) inflation, the consistency relation becomes f NL orth. = 0.070f NL equil. ≤ 0. These consistency relations are also valid in the mixed scenario where the quantum fluctuations of some other light scalar fields contribute to a part of total curvature perturbation on the super-horizon scale and may generate a local form bispectrum. A distinguishing prediction of the mixed scenario is τ NL loc. > ((6/5)f NL loc. ) 2 . Comparing these consistency relations to WMAP 7yr data, there is still a big room for the Lorentz invariant inflation, but DBI inflation has been disfavored at more than 68% CL

  20. Dynamic Incentive Effects of Relative Performance Pay: A Field Experiment

    NARCIS (Netherlands)

    J. Delfgaauw (Josse); A.J. Dur (Robert); J.A. Non (Arjan); W.J.M.I. Verbeke (Willem)

    2010-01-01

    textabstractWe conduct a field experiment among 189 stores of a retail chain to study dynamic incentive effects of relative performance pay. Employees in the randomly selected treatment stores could win a bonus by outperforming three comparable stores from the control group over the course of four

  1. Digital maintenance field technology for the maintenance of nuclear power plant

    International Nuclear Information System (INIS)

    Sato, Tomomasa; Asama, Hajime; Kita, Nobuyuki; Numano, Masayoshi

    2002-01-01

    This paper proposes a concept of 'Digital Maintenance Field Technology', which enables human beings and working robots making fully use of the necessary information for maintenance activity not only in any location of the maintenance field (seamless in location) but also in any moment from the past to the future (seamless in time) and in any format in presenting to human (seamless in semantics). The paper points out the following three essential components of the technology: 1) 'Digital Field Construction Technology', 2) 'Digital Field Archival Technology' and 3) 'Digital Field Presentation Technology'. The necessary capabilities are extracted and our approaches and state of the art of realizing these capabilities are introduced in addition to present the state of the art of home application example. The future extension is also illustrated. (author)

  2. Technological transfers and cooperation in the field of climatic change

    International Nuclear Information System (INIS)

    Riedacker, A.

    2002-01-01

    Fighting against climatic changes and adapting to them is a necessary condition to achieve sustainable development. The ultimate goal of the Framework Convention on Climate Change signed in Rio in 1992, and specified in article 2, is to stabilize the concentrations of greenhouse gases at a level that does not threaten climatic systems and allows ecosystems to adapt to climatic change, ensures that food production is not in danger and that sustainable development be achieved. A radical paradigm change is required, and in particular the adoption of new technologies. First, the new technologies must assist in limiting the emissions of greenhouse gases, both in industrialized and developing countries, and to adapt to the climatic changes. The author is of the opinion that technology transfers represent a means to address the issue of climatic change. The concentration of carbon dioxide in the atmosphere continues to increase since the advent of the industrial revolution. It seems dubious that we will be able to stabilize the climate to its actual level, therefore we must learn to adapt while continuing to reduce the emissions of greenhouse gases. The author then examines the technological cooperation since the adoption of the Marrakech Accords in 2001. The next section deals with technological cooperation between francophone cities of the north and francophone cities of the south. The author concludes by placing the emphasis on the importance of regular meetings and the implementation of specialized networks, such as the network on the technology of arid regions, in an effort to assist the technological cooperation north-south and south-south in the fight against climatic change. 2 figs

  3. Constraints to feedback provision on forestry-related technologies ...

    African Journals Online (AJOL)

    This paper ascertained the constraints to feedback provision on forestry-related technologies. Interview schedule was used to elicit information from 163 randomly selected respondents. Descriptive (frequencies, percentages) and inferential (Chi square and Ordinary Least square regression) statistics were used to analyse ...

  4. Concept relation discovery and innovation enabling technology (CORDIET)

    NARCIS (Netherlands)

    Poelmans, J.; Elzinga, P.; Neznanov, A.; Viaene, S.; Kuznetsov, S.O.; Ignatov, D.; Dedene, G.

    2011-01-01

    Concept Relation Discovery and Innovation Enabling Technology (CORDIET), is a toolbox for gaining new knowledge from unstructured text data. At the core of CORDIET is the C-K theory which captures the essential elements of innovation. The tool uses Formal Concept Analysis (FCA), Emergent Self

  5. Field tests applying multi-agent technology for distributed control. Virtual power plants and wind energy

    International Nuclear Information System (INIS)

    Schaeffer, G.J.; Warmer, C.J.; Hommelberg, M.P.F.; Kamphuis, I.G.; Kok, J.K.

    2007-01-01

    Multi-agent technology is state of the art ICT. It is not yet widely applied in power control systems. However, it has a large potential for bottom-up, distributed control of a network with large-scale renewable energy sources (RES) and distributed energy resources (DER) in future power systems. At least two major European R and D projects (MicroGrids and CRISP) have investigated its potential. Both grid-related as well as market-related applications have been studied. This paper will focus on two field tests, performed in the Netherlands, applying multi-agent control by means of the PowerMatcher concept. The first field test focuses on the application of multi-agent technology in a commercial setting, i.e. by reducing the need for balancing power in the case of intermittent energy sources, such as wind energy. In this case the flexibility is used of demand and supply of industrial and residential consumers and producers. Imbalance reduction rates of over 40% have been achieved applying the PowerMatcher, and with a proper portfolio even larger rates are expected. In the second field test the multi-agent technology is used in the design and implementation of a virtual power plant (VPP). This VPP digitally connects a number of micro-CHP units, installed in residential dwellings, into a cluster that is controlled to reduce the local peak demand of the common low-voltage grid segment the micro-CHP units are connected to. In this way the VPP supports the local distribution system operator (DSO) to defer reinforcements in the grid infrastructure (substations and cables)

  6. Accelerator Technology: Injection and Extraction Related Hardware: Kickers and Septa

    CERN Document Server

    Barnes, M J; Mertens, V

    2013-01-01

    This document is part of Subvolume C 'Accelerators and Colliders' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the the Section '8.7 Injection and Extraction Related Hardware: Kickers and Septa' of the Chapter '8 Accelerator Technology' with the content: 8.7 Injection and Extraction Related Hardware: Kickers and Septa 8.7.1 Fast Pulsed Systems (Kickers) 8.7.2 Electrostatic and Magnetic Septa

  7. NASA(Field Center Based) Technology Commercialization Centers

    Science.gov (United States)

    1995-01-01

    Under the direction of the IC(sup 2) Institute, the Johnson Technology Commercialization Center has met or exceeded all planned milestones and metrics during the first two and a half years of the NTCC program. The Center has established itself as an agent for technology transfer and economic development in- the Clear Lake community, and is positioned to continue as a stand-alone operation. This report presents data on the experimental JTCC program, including all objective measures tracked over its duration. While the metrics are all positive, the data indicates a shortage of NASA technologies with strong commercial potential, barriers to the identification and transfer of technologies which may have potential, and small financial return to NASA via royalty-bearing licenses. The Center has not yet reached the goal of self-sufficiency based on rental income, and remains dependent on NASA funding. The most important issues raised by the report are the need for broader and deeper community participation in the Center, technology sourcing beyond JSC, and the form of future funding which will be appropriate.

  8. Corrective measures technology for shallow land burial at arid sites: field studies of biointrusion barriers and erosion control

    Energy Technology Data Exchange (ETDEWEB)

    Nyhan, J.W.; Hakonson, T.E.; Lopez, E.A.

    1986-03-01

    The field research program involving corrective measures technologies for arid shallow land burial (SLB) sites is described. Results of field testing of a biointrusion barrier installed at a close-out waste disposal site (Area B) at Los Alamos are presented. Soil erosion and infiltration of water into a simulated trench cap with various surface treatments were measured, and the interaction between erosion control and subsurface water dynamics is discussed relative to waste management.

  9. From field theory to phenomenology: the history of dispersion relations

    International Nuclear Information System (INIS)

    Pickering, A.

    1989-01-01

    The authors chart the history of quantum field theory (QFT) in the 1950s with reference to the ideas of dispersion relations. QFT failed to explain strong interaction physics and so was discarded. Connections are drawn between a central group of particle theorists working on applying Kramers-Kronig light scattering relations to high energy particle scattering and the way physics developed. The concepts of single and double dispersion relations and Regge poles, when connected with the large quantity of empirical data from the large particle accelerators of the 1950s, could not be embodied within QFT, which then fell into decline. (UK)

  10. The activities of HPPA technology related to ADS in China

    CERN Document Server

    Guan Xia Ling; Ding Da Zhao; Fang Jia Xun; Fang Shou Xian; Fu Shin Ian; Guo, Z Y; Jiang Wei; Li Jie Quan; Luo Zi Hua; Ouyang Hua Fu; Peng Chao Hua; Xu Tao Guang; Xu Wen Wu; Yu Qi; Zhang Zong Hua; Zhao Sheng Chu

    2001-01-01

    High Power Proton Accelerator (HPPA) is being studied all over world for numerous applications, which includes the waste transmutation, spallation neutron source and material irradiation facilities. In China, a multi-purpose verification system as a first phase of Chinese ADS program consists of a low energy accelerator (150 MeV/3 mA proton linac) and a swimming pool light water sub-critical reactor. The activities of HPPA technology related to ADS in China, which includes the intense proton ECR source, the RFQ accelerator and some other technology of HPPA, are described

  11. Gender Differences in the Field of Information Security Technology Management: A Qualitative, Phenomenological Study

    Science.gov (United States)

    Johnson, Marcia L.

    2013-01-01

    This qualitative study explored why there are so few senior women in the information security technology management field and whether gender played a part in the achievement of women in the field. Extensive interviews were performed to capture the lived experiences of successful women in the field regarding the obstacles and common denominators of…

  12. Influence of relative humidity on analyzing electric field exposure using ELF electric field measurements.

    Science.gov (United States)

    Korpinen, Leena H; Kuisti, Harri A; Tarao, Hiroo; Elovaara, Jarmo A

    2013-07-01

    The objective of the study was to investigate the influence of humidity on analyzing electric field exposure using extremely low frequency (ELF) electric field measurements. The study included 322 measurements in a climate room. We used two commercial three-axis meters, EFA-3 and EFA-300, and employed two measurement techniques in the climate room where we varied the temperature from 15 to 25 °C, the relative humidity from 55% to 95%, and the electric field from 1 to 25 kV/m. We calculated Pearson correlations between humidity and percentage errors for all data and for data at different levels of humidity. When the relative humidity was below 70%, the results obtained by the different measurement methods in terms of percentage errors were of the same order of magnitude for the considered temperatures and field strength, but the results were less reliable when the relative humidity was higher than 80%. In the future, it is important to take humidity into account when electric field measurement results will be compared to the values given in different exposure guidelines. Copyright © 2013 Wiley Periodicals, Inc.

  13. Exact solutions of the Bach field equations of general relativity

    Science.gov (United States)

    Fiedler, B.; Schimming, R.

    1980-02-01

    Conformally invariant gravitational field equations on the hand and fourth order field equations on the other were discussed in the early history of general relativity (Weyl Einstein, Bach et al.) and have recently gained some new interest (Deser, P. Günther, Treder, et al.). The equations Bαβ=0 or Bαβ= ϰTαβ, where Bαβ denotes the Bach tensor and Tαβ a suitable energy-momentum tensor, possess both the mentioned properties. We construct exact solutions ds2= gαβdxαdxβ of the Bach equations: (2, 2)-decomposable, centrally symmetric and pp-wave solutions. The gravitational field gαβ is coupled by Bαβ= ϰTαβ to an electromagnetic field Fαβ=- Fαβ obeying the Maxwell equations or to a neutrino field ϕ A obeying the Weyl equations respectively. Among interesting new metrics ds2 there appear some physically well-known ones, such as the De Sitter universe, the Weyl-Trefftz metric. and the plane-fronted gravitational waves with parallel rays (pp-waves) known from Einstein's theory. The solutions are built up by means of special techniques: A separation method for (2, 2)-decomposable solutions, simplification of centrally symmetric metrics by a suitable conformal transformation, and complex function methods for pp-wave solutions.

  14. Indefinite-metric quantum field theory of general relativity

    International Nuclear Information System (INIS)

    Nakanishi, Noboru

    1978-01-01

    Quantum field theory of Einstein's general relativity is formulated in the indefinitemetric Hilbert space in such a way that asymptotic fields are manifestly Lorentz covariant and the physical S-matrix is unitary. The general coordinate transformation is transcribed into a q-number transformation, called the BRS transformation. Its abstract definition is presented on the basis of the BRS transformation for the Yang-Mills theory. The BRS transformation for general relativity is then explicitly constructed. The gauge-fixing Lagrangian density and the Faddeev-Popov one are introduced in such a way that their sum behaves like a scalar density under the BRS transformation. One can then proceed in the same way as in the Kugo-Ojima formalism of the Yang-Mills theory to establish the unitarity of the physical S-matrix. (author)

  15. Field Trial of an Aerosol-Based Enclosure Sealing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Harrington, Curtis [Univ. of California, Davis, CA (United States); Springer, David [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

    2015-09-01

    This report presents the results from several demonstrations of a new method for sealing building envelope air leaks using an aerosol sealing process developed by the Western Cooling Efficiency Center at UC Davis. The process involves pressurizing a building while applying an aerosol sealant to the interior. As air escapes through leaks in the building envelope, the aerosol particles are transported to the leaks where they collect and form a seal that blocks the leak. Standard blower door technology is used to facilitate the building pressurization, which allows the installer to track the sealing progress during the installation and automatically verify the final building tightness. Each aerosol envelope sealing installation was performed after drywall was installed and taped, and the process did not appear to interrupt the construction schedule or interfere with other trades working in the homes. The labor needed to physically seal bulk air leaks in typical construction will not be replaced by this technology.

  16. Enhancing Field Research Methods with Mobile Survey Technology

    Science.gov (United States)

    Glass, Michael R.

    2015-01-01

    This paper assesses the experience of undergraduate students using mobile devices and a commercial application, iSurvey, to conduct a neighborhood survey. Mobile devices offer benefits for enhancing student learning and engagement. This field exercise created the opportunity for classroom discussions on the practicalities of urban research, the…

  17. On the mathematical theory of classical fields and general relativity

    CERN Document Server

    Klainerman, S

    1993-01-01

    From the perspective of an analyst, like myself, the General Theory of Relativity provides an extrordinary rich and vastly virgin territory. It is the aim of my lecture to provide, first, an account of those aspects of the theory which attract me most and second a perspective of what has been accomplished so far in that respect. In trying to state our main objectives it helps to view General Relativity in the broader context of Classical Field Theory. EinsteiniVacuum equations, or shortly E—V, is already sufficiently complicated. I will thus restrict my attention to them.

  18. Relations among fields: Mendelian, cytological and molecular mechanisms.

    Science.gov (United States)

    Darden, Lindley

    2005-06-01

    Philosophers have proposed various kinds of relations between Mendelian genetics and molecular biology: reduction, replacement, explanatory extension. This paper argues that the two fields are best characterized as investigating different, serially integrated, hereditary mechanisms. The mechanisms operate at different times and contain different working entities. The working entities of the mechanisms of Mendelian heredity are chromosomes, whose movements serve to segregate alleles and independently assort genes in different linkage groups. The working entities of numerous mechanisms of molecular biology are larger and smaller segments of DNA plus related molecules. Discovery of molecular DNA mechanisms filled black boxes that were noted, but unilluminated, by Mendelian genetics.

  19. Analysis of methodology for designing education and training model for professional development in the field of radiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kon Wuk; Lee, Jae Hun; Park, Tai Jin; Song, Myung Jae [Korean Association for Radiation Application, Seoul (Korea, Republic of)

    2015-02-15

    The domestic Radiation Technology is integrated into and utilized in various areas and is closely related to the industrial growth in Korea. The domestic use of radiation and RI (Radioisotope) increases in quantity every year, however the level of technology is poor when compared to other developed countries. Manpower training is essential for the development of Radiation Technology. Therefore, this study aimed to propose a methodology for designing systemic education and training model in the field of measurement and analysis of radiation. A survey was conducted to design education and training model and the training program for measurement and analysis of radiation was developed based on the survey results. The education and training program designed in this study will be utilized as a model for evaluating the professional development and effective recruitment of the professional workforce, and can be further applied to other radiation-related fields.

  20. Analysis of methodology for designing education and training model for professional development in the field of radiation technology

    International Nuclear Information System (INIS)

    Kim, Kon Wuk; Lee, Jae Hun; Park, Tai Jin; Song, Myung Jae

    2015-01-01

    The domestic Radiation Technology is integrated into and utilized in various areas and is closely related to the industrial growth in Korea. The domestic use of radiation and RI (Radioisotope) increases in quantity every year, however the level of technology is poor when compared to other developed countries. Manpower training is essential for the development of Radiation Technology. Therefore, this study aimed to propose a methodology for designing systemic education and training model in the field of measurement and analysis of radiation. A survey was conducted to design education and training model and the training program for measurement and analysis of radiation was developed based on the survey results. The education and training program designed in this study will be utilized as a model for evaluating the professional development and effective recruitment of the professional workforce, and can be further applied to other radiation-related fields

  1. New formulae for magnetic relative helicity and field line helicity

    Science.gov (United States)

    Aly, Jean-Jacques

    2018-01-01

    We consider a magnetic field {B} occupying the simply connected domain D and having all its field lines tied to the boundary S of D. We assume here that {B} has a simple topology, i.e., the mapping {M} from positive to negative polarity areas of S associating to each other the two footpoints of any magnetic line, is continuous. We first present new formulae for the helicity H of {B} relative to a reference field {{B}}r having the same normal component {B}n on S, and for its field line helicity h relative to a reference vector potential {{C}}r of {{B}}r. These formulae make immediately apparent the well known invariance of these quantities under all the ideal MHD deformations that preserve the positions of the footpoints on S. They express indeed h and H either in terms of {M} and {B}n, or in terms of the values on S of a pair of Euler potentials of {B}. We next show that, for a specific choice of {{C}}r, the field line helicity h of {B} fully characterizes the magnetic mapping {M} and then the topology of the lines. Finally, we give a formula that describes the rate of change of h in a situation where the plasma moves on the perfectly conducting boundary S without changing {B}n and/or non-ideal processes, described by an unspecified term {N} in Ohm’s law, are at work in some parts of D.

  2. MULTIMEDIA CREATIVE PROJECT AS A TRAINING TECHNOLOGY OF FUTURE SPECIALISTS IN THE FIELD OF MASS MEDIA

    Directory of Open Access Journals (Sweden)

    Yaroslav V. Yanenko

    2014-12-01

    Full Text Available The study defines the characteristics of modern creative projects as a technology of training of future specialists in the field of media, advertising and public relations. Special attention is paid to analysis of the concepts of «multimedia» and «creative project». The article offers practical examples of implementation of multimedia creative projects made by students in «Journalism» and «Advertising and public relations» of Sumy State University in the study of special subjects «Branding» and «Practice of advertising». Examples of creative jobs as a short-term creative projects in the discipline «Theory of advertising» are presented.

  3. Integration of information and communication technologies in special relativity teaching

    International Nuclear Information System (INIS)

    Barbier, Remi; Fleck, Sonia; Perries, Stephane; Ray, Cedric

    2005-01-01

    Integration of information and communication technologies (ICTs) in special relativity teaching may bring multiple and complementary methods for introducing either difficult or abstract counterintuitive concepts. This paper describes multimedia content developed at Lyon University to enhance the learning process of undergraduate students. Two categories of animated scenarios have been identified: real experiments and thought experiments. Both typical examples of these scenarios and their impacts on the teaching process are discussed

  4. Integration of information and communication technologies in special relativity teaching

    Energy Technology Data Exchange (ETDEWEB)

    Barbier, Remi; Fleck, Sonia; Perries, Stephane; Ray, Cedric [IPNL-CNRS/IN2P3, Universite Claude Bernard Lyon 1, 4 rue E Fermi, 69622 Villeurbanne cedex (France)

    2005-09-01

    Integration of information and communication technologies (ICTs) in special relativity teaching may bring multiple and complementary methods for introducing either difficult or abstract counterintuitive concepts. This paper describes multimedia content developed at Lyon University to enhance the learning process of undergraduate students. Two categories of animated scenarios have been identified: real experiments and thought experiments. Both typical examples of these scenarios and their impacts on the teaching process are discussed.

  5. FIELD TESTING & OPTIMIZATION OF CO2/SAND FRACTURING TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Raymond L. Mazza

    2004-11-30

    These contract efforts involved the demonstration of a unique liquid free stimulation technology which was, at the beginning of these efforts, in 1993 unavailable in the US. The process had been developed, and patented in Canada in 1981, and held promise for stimulating liquid sensitive reservoirs in the US. The technology differs from that conventionally used in that liquid carbon dioxide (CO{sub 2}), instead of water is the base fluid. The CO{sub 2} is pumped as a liquid and then vaporizes at reservoir conditions, and because no other liquids or chemicals are used, a liquid free fracture is created. The process requires a specialized closed system blender to mix the liquid CO{sub 2} with proppant under pressure. These efforts were funded to consist of up to 21 cost-shared stimulation events. Because of the vagaries of CO{sub 2} supplies, service company support and operator interest only 19 stimulation events were performed in Montana, New Mexico, and Texas. Final reports have been prepared for each of the four demonstration groups, and the specifics of those demonstrations are summarized. A summary of the demonstrations of a novel liquid-free stimulation process which was performed in four groups of ''Candidate Wells'' situated in Crockett Co., TX; San Juan Co., NM; Phillips Co., MT; and Blaine Co., MT. The stimulation process which employs CO{sub 2} as the working fluid and the production responses were compared with those from wells treated with conventional stimulation technologies, primarily N{sub 2} foam, excepting those in Blaine Co., MT where the reservoir pressure is too low to clean up spent stimulation liquids. A total of 19 liquid-free CO{sub 2}/sand stimulations were performed in 16 wells and the production improvements were generally uneconomic.

  6. Conformal consistency relations for single-field inflation

    International Nuclear Information System (INIS)

    Creminelli, Paolo; Noreña, Jorge; Simonović, Marko

    2012-01-01

    We generalize the single-field consistency relations to capture not only the leading term in the squeezed limit — going as 1/q 3 , where q is the small wavevector — but also the subleading one, going as 1/q 2 . This term, for an (n+1)-point function, is fixed in terms of the variation of the n-point function under a special conformal transformation; this parallels the fact that the 1/q 3 term is related with the scale dependence of the n-point function. For the squeezed limit of the 3-point function, this conformal consistency relation implies that there are no terms going as 1/q 2 . We verify that the squeezed limit of the 4-point function is related to the conformal variation of the 3-point function both in the case of canonical slow-roll inflation and in models with reduced speed of sound. In the second case the conformal consistency conditions capture, at the level of observables, the relation among operators induced by the non-linear realization of Lorentz invariance in the Lagrangian. These results mean that, in any single-field model, primordial correlation functions of ζ are endowed with an SO(4,1) symmetry, with dilations and special conformal transformations non-linearly realized by ζ. We also verify the conformal consistency relations for any n-point function in models with a modulation of the inflaton potential, where the scale dependence is not negligible. Finally, we generalize (some of) the consistency relations involving tensors and soft internal momenta

  7. A field application experience of integrating hydrogen technology with wind power in a remote island location

    Science.gov (United States)

    Gazey, R.; Salman, S. K.; Aklil-D'Halluin, D. D.

    This paper aims to share the field application experience related to the development of an innovative stand-alone sustainable energy system known as the PURE project. The PURE project has been developed alongside a Knowledge Transfer Partnership (KTP) scheme, which is supported by the UK Department of Trade and Industry and executed by siGEN in collaboration with The Robert Gordon University. The system has been constructed within an industrial estate on the island of Unst in Shetland, 200 miles north of the Scottish mainland. The energy system now supplies five business properties with clean reliable power and utilises wind turbine and hydrogen technology to provide a sustainable energy source. The stored hydrogen gas generated by the system is used as an energy source for periods when electrical demand within the business properties exceeds wind turbine production. The hydrogen is also utilised as a fuel source for transportation and as a transportable energy source for mobile power generation. The paper therefore gives a detailed description of the PURE project and discusses the field experience accumulated during the development and installation of the system. It also shares a number of practical issues that had to be overcome during its integration and operation. The installation of the PURE project has resulted in a number of unexpected conclusions being identified and marks a significant step forward in the accessible deployment of this technology for community use.

  8. Technology and Economic Assessment of Innovative Field Drainage Technologies in Denmark

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni

    proposed as appropriate solutions to this problem in the Danish context. The feasibility of these technologies with regards to their cost-effectiveness in nutrient mitigation, farmers’ adoption behavior, and environmental policy implementation is assessed in this thesis. The thesis comprises of four papers...... based on survey and case-farms data and utilizes a mix of quantitative and qualitative methods to investigate: i) the farmers’ perception of water quality and their adoption behavior with respect to voluntary nutrient reduction technologies, ii) the farmers willingness to adopt constructed wetland...... technologies, and their willingness and extent of trading-off the existing farm management nutrient reduction measures with constructed wetland technology, iii) the cost-effectiveness of surface flow constructed wetlands, and iv) the strategies of incorporating the filter technologies into policy measures...

  9. Special Technology Area Review on Field Programmable Gate Arrays (FPGAs) For Military Applications

    National Research Council Canada - National Science Library

    2005-01-01

    ...) on Field Programmable Gate Arrays (FPGAs) for Military Applications on August 3-4, 2004 at the Naval Postgraduate School in Monterey, California to address issues relevant to the use of this technology in military systems...

  10. Near field communications technology and the potential to reduce medication errors through multidisciplinary application

    LENUS (Irish Health Repository)

    O’Connell, Emer

    2016-07-01

    Patient safety requires optimal management of medications. Electronic systems are encouraged to reduce medication errors. Near field communications (NFC) is an emerging technology that may be used to develop novel medication management systems.

  11. Development, evaluation and application of performance-based brake testing technologies field test : executive summary

    Science.gov (United States)

    1999-09-01

    This report presents the results of the field test portion of the Development, Evaluation, and Application of Performance-Based Brake Testing Technologies sponsored by the Federal Highway Administrations (FHWA) Office of Motor Carriers.

  12. Assessing the Effectiveness of Defensive Aid Suite Technology Using a Field Trial and Modelling and Simulation

    National Research Council Canada - National Science Library

    Fournier, Pierre

    2002-01-01

    ...) community that Defensive Aid Suite (DAS) technologies can improve the protection of LAVs. A prototype DAS system was developed by DRDC Valcartier and tested in field trials held in 1995 and 1999...

  13. Innovative technology in teaching foreign language of future specialists in the field of tourism

    Directory of Open Access Journals (Sweden)

    Мира Алексеевна Вчерашняя

    2010-03-01

    Full Text Available The article describes the major trends in tourism development in Kaliningrad, caused the actualization of the application of information and innovative technologies of foreign language teaching in vocational training in the field of tourism.

  14. Bilateral agreements in the field of nuclear trade and technology

    International Nuclear Information System (INIS)

    Di Primio, J.C.

    1989-03-01

    This report analyses the evolution of the Non-Proliferation Treaty and the non-proliferation regime since the nineteen sixties from the angle of an interdisciplinary approach. The medium- and long-term issues of non-proliferation are identified and discussed in connection with the NPT revisional conference to be held in 1990, and the NPT extension conference in 1995. The major subjects under review include: the international safeguards system; NP aspects of new technologies; bilateral agreements on cooperation in nuclear energy; developments on the international nuclear market; arms control issues of relevance to the NPT; the non-proliferation interests of the Federal Republic of Germany. Looking ahead to the conferences in 1990 and 1995, the report reveals some major aspects and recommendations for consideration in decisions on the future line of non-proliferation policy pursued by the Federal German government. (orig./HP) [de

  15. The relative biological effectiveness of out-of-field dose

    Science.gov (United States)

    Balderson, Michael; Koger, Brandon; Kirkby, Charles

    2016-01-01

    Purpose: using simulations and models derived from existing literature, this work investigates relative biological effectiveness (RBE) for out-of-field radiation and attempts to quantify the relative magnitudes of different contributing phenomena (spectral, bystander, and low dose hypersensitivity effects). Specific attention is paid to external beam radiotherapy treatments for prostate cancer. Materials and methods: using different biological models that account for spectral, bystander, and low dose hypersensitivity effects, the RBE was calculated for different points moving radially out from isocentre for a typical single arc VMAT prostate case. The RBE was found by taking the ratio of the equivalent dose with the physical dose. Equivalent doses were calculated by determining what physical dose would be necessary to produce the same overall biological effect as that predicted using the different biological models. Results: spectral effects changed the RBE out-of-field less than 2%, whereas response models incorporating low dose hypersensitivity and bystander effects resulted in a much more profound change of the RBE for out-of-field doses. The bystander effect had the largest RBE for points located just outside the edge of the primary radiation beam in the cranial caudal (z-direction) compared to low dose hypersensitivity and spectral effects. In the coplanar direction, bystander effect played the largest role in enhancing the RBE for points up to 8.75 cm from isocentre. Conclusions: spectral, bystander, and low dose hypersensitivity effects can all increase the RBE for out-of-field radiation doses. In most cases, bystander effects seem to play the largest role followed by low dose hypersensitivity. Spectral effects were unlikely to be of any clinical significance. Bystander, low dose hypersensitivity, and spectral effect increased the RBE much more in the cranial caudal direction (z-direction) compared with the coplanar directions.

  16. Microbiological effectiveness of household water treatment technologies under field use conditions in rural Tanzania.

    Science.gov (United States)

    Mohamed, Hussein; Clasen, Thomas; Njee, Robert Mussa; Malebo, Hamisi M; Mbuligwe, Stephen; Brown, Joe

    2016-01-01

    To assess the microbiological effectiveness of several household water treatment and safe storage (HWTS) options in situ in Tanzania, before consideration for national scale-up of HWTS. Participating households received supplies and instructions for practicing six HWTS methods on a rotating 5-week basis. We analysed 1202 paired samples (source and treated) of drinking water from 390 households, across all technologies. Samples were analysed for thermotolerant (TTC) coliforms, an indicator of faecal contamination, to measure effectiveness of treatment in situ. All HWTS methods improved microbial water quality, with reductions in TTC of 99.3% for boiling, 99.4% for Waterguard ™ brand sodium hypochlorite solution, 99.5% for a ceramic pot filter, 99.5% for Aquatab ® sodium dichloroisocyanurate (NaDCC) tablets, 99.6% for P&G Purifier of Water ™ flocculent/disinfectant sachets, and 99.7% for a ceramic siphon filter. Microbiological performance was relatively high compared with other field studies and differences in microbial reductions between technologies were not statistically significant. Given that microbiological performance across technologies was comparable, decisions regarding scale-up should be based on other factors, including uptake in the target population and correct, consistent, and sustained use over time. © 2015 John Wiley & Sons Ltd.

  17. Survey of large-scale isotope applications: nuclear technology field

    Energy Technology Data Exchange (ETDEWEB)

    Dewitt, R.

    1977-01-21

    A preliminary literature survey of potential large-scale isotope applications was made according to topical fields; i.e., nuclear, biological, medical, environmental, agricultural, geological, and industrial. Other than the possible expansion of established large-scale isotope applications such as uranium, boron, lithium, and hydrogen, no new immediate isotope usage appears to be developing. Over the long term a change in emphasis for isotope applications was identified which appears to be more responsive to societal concerns for health, the environment, and the conservation of materials and energy. For gram-scale applications, a variety of isotopes may be required for use as nonradioactive ''activable'' tracers. A more detailed survey of the nuclear field identified a potential need for large amounts (tons) of special isotopic materials for advanced reactor components and structures. At this need for special materials and the development of efficient separation methods progresses, the utilization of isotopes from nuclear wastes for beneficial uses should also progress.

  18. FIELD EVALUATION OF LOW-EMISSION COAL BURNER TECHNOLOGY ON UTILITY BOILERS VOLUME III. FIELD EVALUATIONS

    Science.gov (United States)

    The report gives results of field tests conducted to determine the emission characteristics of a Babcock and Wilcox Circular burner and Dual Register burner (DRB). The field tests were performed at two utility boilers, generally comparable in design and size except for the burner...

  19. The socio-materiality of learning practices and implications for the field of learning technology

    Directory of Open Access Journals (Sweden)

    Aditya Johri

    2011-12-01

    Full Text Available Although the use of digital information technologies in education has becomecommonplace, there are few, if any, central guiding frameworks or theories thatexplicate the relationship between technology and learning practices. In thispaper, I argue that such a theoretical framework can assist scholars and practitionersalike by working as a conduit to study and design learning technologies.Towards this goal, I propose socio-materiality as a key theoretical construct withvaluable insights and implications for the field of learning technology. Sociomaterialityhelps balance the disproportionate attention given to either the socialimplications of technology use or the material aspects of technology design.Furthermore, I forward ‘socio-material bricolage' as a useful analytical frameworkto examine and design technology-infused learning environments. I illustratethe value of the framework by applying it to three case studies of formaland informal technology-based learning.

  20. Using virtual reality technology to include field operators in simulation and training

    International Nuclear Information System (INIS)

    Nystad, E.; Strand, S.

    2006-01-01

    By using virtual reality technology, field operators can be included in simulator training. A study has been performed where field operators could perform their activities in a virtual plant and communicate with a control room operator who was placed in a physical control room simulator. This paper describes the use of VR technology in the study and how the operators experienced interacting with the virtual plant. (author)

  1. Traditional Geology Field Camp: A capstone course at South Dakota School of Mines and Technology (BHNSFS)

    Science.gov (United States)

    Uzunlar, N.; Lisenbee, A. L.

    2012-12-01

    The Black Hills Natural Sciences Field Station (BHNSFS) has provided field training in geology and geological engineering for more than 40 years, and since the 1980's as a consortium serving five schools with South Dakota School of Mines and Technology as the coordinator. The traditional summer geology field camp is a five week long, intense program aimed to prepare students for subsequent professional geologic experiences. It is delivered from two separate facilities, one in the Black Hills (South Dakota) from a beautiful log lodge along Sand Creek, in eastern Wyoming, and a second from the town of Taskesti along the North Anatolian fault approximately 200 km east of Istanbul, Turkey. At both locations, the courses maintain a strong emphasis on basic field applications, including the use of GPS as a mapping tool in most exercises. The preparation of well-written reports, based on field descriptions supplemented by research on the web or through published documents, is strongly emphasized. Projects at the Black Hills field camp includes mapping of Precambrian basement, Paleozoic stratigraphy, and Laramide Tertiary plutons and structural features as welll as post-Laramide,, faulted continental strata. The popular Taskesti field camp utilizes the diverse geology of the Tethyan realm, as well as the culture and history, of central Turkey (Anatolia). The course is based at a Turkish Government Earthquake Research Center facility along the North Anatolian fault. Students examine and map selected locations across the Izmir-Ankara suture including: 1) Deformed Cretaceous and Tertiary carbonate and clastic strata of the Sakarya micro-continent in a fore-arc basin; 2) Marble and skarn surrounding Eocene, subduction-related granite intruded into a passive margin sequence in the Sivrihisar region of central Anatolia; 3) Faulted and folded Neogene strata in the northern flank of the post-Tethyan, Haymana Basin and the contrasting terrains across the North Anatolian fault (J

  2. Movement-related neuromagnetic fields in preschool age children.

    Science.gov (United States)

    Cheyne, Douglas; Jobst, Cecilia; Tesan, Graciela; Crain, Stephen; Johnson, Blake

    2014-09-01

    We examined sensorimotor brain activity associated with voluntary movements in preschool children using a customized pediatric magnetoencephalographic system. A videogame-like task was used to generate self-initiated right or left index finger movements in 17 healthy right-handed subjects (8 females, ages 3.2-4.8 years). We successfully identified spatiotemporal patterns of movement-related brain activity in 15/17 children using beamformer source analysis and surrogate MRI spatial normalization. Readiness fields in the contralateral sensorimotor cortex began ∼0.5 s prior to movement onset (motor field, MF), followed by transient movement-evoked fields (MEFs), similar to that observed during self-paced movements in adults, but slightly delayed and with inverted source polarities. We also observed modulation of mu (8-12 Hz) and beta (15-30 Hz) oscillations in sensorimotor cortex with movement, but with different timing and a stronger frequency band coupling compared to that observed in adults. Adult-like high-frequency (70-80 Hz) gamma bursts were detected at movement onset. All children showed activation of the right superior temporal gyrus that was independent of the side of movement, a response that has not been reported in adults. These results provide new insights into the development of movement-related brain function, for an age group in which no previous data exist. The results show that children under 5 years of age have markedly different patterns of movement-related brain activity in comparison to older children and adults, and indicate that significant maturational changes occur in the sensorimotor system between the preschool years and later childhood. Copyright © 2014 Wiley Periodicals, Inc.

  3. Thermodynamics, transport phenomena, and electrochemistry of external field-assisted nonthermal food technologies.

    Science.gov (United States)

    Misra, N N; Martynenko, Alex; Chemat, Farid; Paniwnyk, Larysa; Barba, Francisco J; Jambrak, Anet Režek

    2017-03-31

    Interest in the development and adoption of nonthermal technologies is burgeoning within the food and bioprocess industry, the associated research community, and among the consumers. This is evident from not only the success of some innovative nonthermal technologies at industrial scale, but also from the increasing number of publications dealing with these topics, a growing demand for foods processed by nonthermal technologies and use of natural ingredients. A notable feature of the nonthermal technologies such as cold plasma, electrohydrodynamic processing, pulsed electric fields, and ultrasound is the involvement of external fields, either electric or sound. Therefore, it merits to study the fundamentals of these technologies and the associated phenomenon with a unified approach. In this review, we revisit the fundamental physical and chemical phenomena governing the selected technologies, highlight similarities, and contrasts, describe few successful applications, and finally, identify the gaps in research.

  4. Consequences of information technology usage on retailer-supplier relations

    DEFF Research Database (Denmark)

    Esbjerg, Lars

    1. Retailers and suppliers increasingly tend to form long-term co-operative relationships. In the literature, the use of information technology is an enabling factor behind this trend. Nevertheless, our understanding of how information technology influences retailer-supplier relationships is still...... traditionally been adversarial, retailers and suppliers are beginning to realise that they can benefit from co-operating. Further, developmental processes in co-operative inter-organisational relations are discussed and the important role of social exchange in inter-organisational relationships is stressed. 3...... is becoming a strategic necessity and is not in itself a source of sustainable competitive advantage. Finally, it is pointed out that the propositions developed in this paper have been developed based on previous empirical and theoretical papers and need to be empirically validated....

  5. Area detectors technology and optics-Relations to nature

    International Nuclear Information System (INIS)

    PeIka, Jerzy B.

    2005-01-01

    Relations between natural vision and the artificial 2D imaging systems are discussed. A variety of animal vision as well as its main functional parts are briefly reviewed and compared with the artificial vision equivalents. An increasing advancement observed in human constructions of imaging devices due to recent rapid progress in science and technology is shown to resemble some sophisticated natural solutions formed by evolution in biological systems. The issues of the similarities and differences between the two kinds of vision are discussed. Main focus is put on optical systems forming the image, with special examples of the imaging systems designed to work in the region of the X-ray radiation. Examples of bio-inspired technological vision devices are presented

  6. Personal Professional Development Efforts Scale for Science and Technology Teachers Regarding Their Fields

    Science.gov (United States)

    Bilgin, Aysegül; Balbag, Mustafa Zafer

    2016-01-01

    This study has developed "Personal Professional Development Efforts Scale for Science and Technology Teachers Regarding Their Fields". Exploratory factor analysis of the scale has been conducted based on the data collected from 200 science and technology teachers across Turkey. The scale has been observed through varimax rotation method,…

  7. Integrating iPad Technology in Earth Science K-12 Outreach Courses: Field and Classroom Applications

    Science.gov (United States)

    Wallace, Davin J.; Witus, Alexandra E.

    2013-01-01

    Incorporating technology into courses is becoming a common practice in universities. However, in the geosciences, it is difficult to find technology that can easily be transferred between classroom- and field-based settings. The iPad is ideally suited to bridge this gap. Here, we fully integrate the iPad as an educational tool into two…

  8. Technology Acceptance in Social Work Education: Implications for the Field Practicum

    Science.gov (United States)

    Colvin, Alex Don; Bullock, Angela N.

    2014-01-01

    The exponential growth and sophistication of new information and computer technology (ICT) have greatly influenced human interactions and provided new metaphors for understanding the world. The acceptance and integration of ICT into social work field education are examined here using the technological acceptance model. This article also explores…

  9. The Theoretical Foundations of Educational Technology and Future Directions for the Field.

    Science.gov (United States)

    Winn, Bill

    This paper proposes a theoretical foundation for the field of educational technology based on cognitive learning theory. This proposition is based on consideration of issues which suggest that psychological theory is more central to educational technology than systems theory or theories of management, and that cognitive theories are more…

  10. International political communication and influence of information and communication technologies on contemporary international relations

    Directory of Open Access Journals (Sweden)

    Vranješ Aleksandar

    2017-01-01

    Full Text Available International political communication can be seen as an auxiliary but also constitutive discipline of the International relations in the wider field of the Political science. At the very core of International relations is Political communication through which the most important actors of world politics realize political goals. This paper presents a short genesis of the development of the International political communication and relation to the International relations. The key terms have been defined, the most important theories have been given and today's global character of International communication has been highlighted. The changes in International politics were analyzed as the consequence of the information and communication revolution and the emergence of modern Information and communication technologies that change the very nature of International relations. An overview of the new communication technologies impact on the main actors (subjects/entities of International relations was made, thus analyzing the impact of this factor on both state and non-state actors. We looked back at the impact of information and communication technologies on an individual who, thanks to the global communications network, became a real actor of world politics. There is also a section of the main theories of International relations and their relation to the challenges brought by the Informatics revolution (IT revolution and the Digital age.

  11. INDEX OF SPECIALISATION ACCORDING TO TECHNOLOGICAL FIELDS AND THE PERSPECTIVES OF TECHNOLOGICAL LEADERSHIP OF RUSSIA

    Directory of Open Access Journals (Sweden)

    V. G. Zinov

    2016-01-01

    Full Text Available The article presents a completed analysis of patent documents collections, distributed outside ofRussian Federationand its organisation according to classes introduced by International Patent Classification. There are identified areas in engineering, where an increased activity of Russian residents is detected in the global space of intellectual property (IP. There are recognised competitive scientific-technological capacities ofRussian Federationfor conquering the world market. These include technologies for creating and producing new medical drugs, informational communication and digital technologies. There has been identified a significant number of patent technical solutions in certain areas of chemical and biotechnologies. It is emphasised that Russian global technological leadership is impossible without the presence in the global space of the intellectual property.

  12. Relating the archetypes of logarithmic conformal field theory

    International Nuclear Information System (INIS)

    Creutzig, Thomas; Ridout, David

    2013-01-01

    Logarithmic conformal field theory is a rich and vibrant area of modern mathematical physics with well-known applications to both condensed matter theory and string theory. Our limited understanding of these theories is based upon detailed studies of various examples that one may regard as archetypal. These include the c=−2 triplet model, the Wess–Zumino–Witten model on SL(2;R) at level k=−1/2 , and its supergroup analogue on GL(1|1). Here, the latter model is studied algebraically through representation theory, fusion and modular invariance, facilitating a subsequent investigation of its cosets and extended algebras. The results show that the archetypes of logarithmic conformal field theory are in fact all very closely related, as are many other examples including, in particular, the SL(2|1) models at levels 1 and −1/2 . The conclusion is then that the archetypal examples of logarithmic conformal field theory are practically all the same, so we should not expect that their features are in any way generic. Further archetypal examples must be sought

  13. Relating the archetypes of logarithmic conformal field theory

    Energy Technology Data Exchange (ETDEWEB)

    Creutzig, Thomas, E-mail: tcreutzig@mathematik.tu-darmstadt.de [Department of Physics and Astronomy, University of North Carolina, Phillips Hall, CB 3255, Chapel Hill, NC 27599-3255 (United States); Fachbereich Mathematik, Technische Universität Darmstadt, Schloßgartenstraße 7, 64289 Darmstadt (Germany); Ridout, David, E-mail: david.ridout@anu.edu.au [Department of Theoretical Physics, Research School of Physics and Engineering, Australian National University, Canberra, ACT 0200 (Australia); Mathematical Sciences Institute, Australian National University, Canberra, ACT 0200 (Australia)

    2013-07-21

    Logarithmic conformal field theory is a rich and vibrant area of modern mathematical physics with well-known applications to both condensed matter theory and string theory. Our limited understanding of these theories is based upon detailed studies of various examples that one may regard as archetypal. These include the c=−2 triplet model, the Wess–Zumino–Witten model on SL(2;R) at level k=−1/2 , and its supergroup analogue on GL(1|1). Here, the latter model is studied algebraically through representation theory, fusion and modular invariance, facilitating a subsequent investigation of its cosets and extended algebras. The results show that the archetypes of logarithmic conformal field theory are in fact all very closely related, as are many other examples including, in particular, the SL(2|1) models at levels 1 and −1/2 . The conclusion is then that the archetypal examples of logarithmic conformal field theory are practically all the same, so we should not expect that their features are in any way generic. Further archetypal examples must be sought.

  14. Relation between magnetic fields and electric currents in plasmas

    Directory of Open Access Journals (Sweden)

    V. M. Vasyliunas

    2005-10-01

    Full Text Available Maxwell's equations allow the magnetic field B to be calculated if the electric current density J is assumed to be completely known as a function of space and time. The charged particles that constitute the current, however, are subject to Newton's laws as well, and J can be changed by forces acting on charged particles. Particularly in plasmas, where the concentration of charged particles is high, the effect of the electromagnetic field calculated from a given J on J itself cannot be ignored. Whereas in ordinary laboratory physics one is accustomed to take J as primary and B as derived from J, it is often asserted that in plasmas B should be viewed as primary and J as derived from B simply as (c/4π∇×B. Here I investigate the relation between ∇×B and J in the same terms and by the same method as previously applied to the MHD relation between the electric field and the plasma bulk flow vmv2001: assume that one but not the other is present initially, and calculate what happens. The result is that, for configurations with spatial scales much larger than the electron inertial length λe, a given ∇×B produces the corresponding J, while a given J does not produce any ∇×B but disappears instead. The reason for this can be understood by noting that ∇×B≠4π/cJ implies a time-varying electric field (displacement current which acts to change both terms (in order to bring them toward equality; the changes in the two terms, however, proceed on different time scales, light travel time for B and electron plasma period for J, and clearly the term changing much more slowly is the one that survives. (By definition, the two time scales are equal at λe. On larger scales, the evolution of B (and hence also of ∇×B is governed by ∇×E, with E determined by plasma dynamics via the generalized Ohm's law; as illustrative simple examples, I discuss the formation of magnetic drift currents in the magnetosphere and of Pedersen and Hall currents in

  15. Relations between information and communication technologies and international migration

    Directory of Open Access Journals (Sweden)

    Lukić Vesna

    2017-01-01

    Full Text Available The paper focuses on the topic of the impact of Information and Communication Technologies (ICT on the international migration phenomenon According to the discussed literature, there is an impression that ICTs change the essence of migration and monitoring of migration flows. It also suggests that migration and migrants’ needs shape the development of ICT services intended to them, but they also shape the content of social media. The impact of new technologies on international migration (before migration, during migration and upon arrival in the country of destination has been discussed through an overview of empirical research findings in Serbia and other countries. In this context, the ICT users relevant to the migration process (individuals and interest groups have been more closely determined and discussed, the aspects of the relations between ICTs and migration have been highlighted, as well as their implications for individuals and society. The considered aspects of relations of ICTs and international migration at different stages of the migration process and their severe implications for individuals and society, in our opinion, point to the need for cooperation of users of information and communication technologies relevant to the migration process in different domains ‒ the spheres of influence of ICTs. We believe that is how the potential of ICTs will be exploited in an adequate way, for benefit of both ‒ migrants and other relevant interested parties. While widely accepted by individuals, information and communication technologies have just begun to be recognized as important for migration policy in Serbia and generally, in terms of their opportunities and challenges. In Serbia, only recently (as of the 2011 Census there has been data available on the use of ICTs by certain migrant groups (long-term settled refugees from former Yugoslav republics. Also, the qualitative surveys on the use of ICTs during the migration by transit

  16. INVESTIGATION OF POLARIZATION PHASE DIFFERENCE RELATED TO FOREST FIELDS CHARACTERIZATIONS

    Directory of Open Access Journals (Sweden)

    M. Majidi

    2013-09-01

    Full Text Available The information content of Synthetic Aperture Radar (SAR data significantly included in the radiometric polarization channels, hence polarimetric SAR data should be analyzed in relation with target structure. The importance of the phase difference between two co-polarized scattered signals due to the possible association between the biophysical parameters and the measured Polarization Phase Difference (PPD statistics of the backscattered signal recorded components has been recognized in geophysical remote sensing. This paper examines two Radarsat-2 images statistics of the phase difference to describe the feasibility of relationship with the physical properties of scattering targets and tries to understand relevance of PPD statistics with various types of forest fields. As well as variation of incidence angle due to affecting on PPD statistics is investigated. The experimental forest pieces that are used in this research are characterized white pine (Pinus strobus L., red pine (Pinus resinosa Ait., jack pine (Pinus banksiana Lamb., white spruce (Picea glauca (Moench Voss, black spruce (Picea mariana (Mill B.S.P., poplar (Populus L., red oak (Quercus rubra L. , aspen and ground vegetation. The experimental results show that despite of biophysical parameters have a wide diversity, PPD statistics are almost the same. Forest fields distributions as distributed targets have close to zero means regardless of the incidence angle. Also, The PPD distribution are function of both target and sensor parameters, but for more appropriate examination related to PPD statistics the observations should made in the leaf-off season or in bands with lower frequencies.

  17. Non-Abelian gauge field theory in scale relativity

    International Nuclear Information System (INIS)

    Nottale, Laurent; Celerier, Marie-Noeelle; Lehner, Thierry

    2006-01-01

    Gauge field theory is developed in the framework of scale relativity. In this theory, space-time is described as a nondifferentiable continuum, which implies it is fractal, i.e., explicitly dependent on internal scale variables. Owing to the principle of relativity that has been extended to scales, these scale variables can themselves become functions of the space-time coordinates. Therefore, a coupling is expected between displacements in the fractal space-time and the transformations of these scale variables. In previous works, an Abelian gauge theory (electromagnetism) has been derived as a consequence of this coupling for global dilations and/or contractions. We consider here more general transformations of the scale variables by taking into account separate dilations for each of them, which yield non-Abelian gauge theories. We identify these transformations with the usual gauge transformations. The gauge fields naturally appear as a new geometric contribution to the total variation of the action involving these scale variables, while the gauge charges emerge as the generators of the scale transformation group. A generalized action is identified with the scale-relativistic invariant. The gauge charges are the conservative quantities, conjugates of the scale variables through the action, which find their origin in the symmetries of the ''scale-space.'' We thus found in a geometric way and recover the expression for the covariant derivative of gauge theory. Adding the requirement that under the scale transformations the fermion multiplets and the boson fields transform such that the derived Lagrangian remains invariant, we obtain gauge theories as a consequence of scale symmetries issued from a geometric space-time description

  18. Theory Development and Convergence of Human Resource Fields: Implications for Human Performance Technology

    Science.gov (United States)

    Cho, Yonjoo; Yoon, Seung Won

    2010-01-01

    This study examines major theory developments in human resource (HR) fields and discusses implications for human performance technology (HPT). Differentiated HR fields are converging to improve organizational performance through knowledge-based innovations. Ruona and Gibson (2004) made a similar observation and analyzed the historical evolution…

  19. The Influence of Technology-Rich Early Childhood Field Experiences on Preservice Teachers

    Science.gov (United States)

    Lux, Nicholas; Lux, Christine

    2015-01-01

    Despite a comprehensive body of research on field experiences in teacher education, technology-rich early field experiences in early childhood environments is one particular area of inquiry lacking substantive current research. Therefore, this study was conducted to better understand how preservice teachers' perceptions of global concepts related…

  20. Summary of vulnerability related technologies based on machine learning

    Science.gov (United States)

    Zhao, Lei; Chen, Zhihao; Jia, Qiong

    2018-04-01

    As the scale of information system increases by an order of magnitude, the complexity of system software is getting higher. The vulnerability interaction from design, development and deployment to implementation stages greatly increases the risk of the entire information system being attacked successfully. Considering the limitations and lags of the existing mainstream security vulnerability detection techniques, this paper summarizes the development and current status of related technologies based on the machine learning methods applied to deal with massive and irregular data, and handling security vulnerabilities.

  1. Changing relations between civil and military nuclear technology

    International Nuclear Information System (INIS)

    Walker, W.B.

    1999-01-01

    Nuclear energy has inhabited two distinct environments since its inception - the environments of nuclear deterrence and of electricity supply. The relationships between the technologies and institutions inhabiting these environments have been both intimate and troublesome. As both nuclear weapons and nuclear power rely upon the fission energy of uranium and plutonium, and as both generate harmful by-products, they are bound to have technologies, materials and liabilities in common. However, nuclear deterrence belongs in the realm of high politics, whilst electricity production is part of the commercial world rooted in civil society. Establishing a political, industrial and regulatory framework that allows nuclear activities to develop safely and acceptably in both domains has been a difficult and contentious task. In this paper I wish to make some observations about the relations between military and civil nuclear technology at the end of this century, and about their likely character in years ahead. My main contention is that developments in the military sector and in international security will remain influential, but that their consequences will be of a different kind than in the past. (orig.)

  2. Field Test of Advanced Duct-Sealing Technologies Within the Weatherization Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Ternes, MP

    2001-12-05

    A field test of an aerosol-spray duct-sealing technology and a conventional, best-practice approach was performed in 80 homes to determine the efficacy and programmatic needs of the duct-sealing technologies as applied in the U.S. Department of Energy Weatherization Assistance Program. The field test was performed in five states: Iowa, Virginia, Washington, West Virginia, and Wyoming. The study found that, compared with the best-practice approach, the aerosol-spray technology is 50% more effective at sealing duct leaks and can potentially reduce labor time and costs for duct sealing by 70%, or almost 4 crew-hours. Further study to encourage and promote use of the aerosol-spray technology within the Weatherization Assistance Program is recommended. A pilot test of full production weatherization programs using the aerosol-spray technology is recommended to develop approaches for integrating this technology with other energy conservation measures and minimizing impacts on weatherization agency logistics. In order to allow or improve adoption of the aerosol spray technology within the Weatherization Assistance Program, issues must be addressed concerning equipment costs, use of the technology under franchise arrangements with Aeroseal, Inc. (the holders of an exclusive license to use this technology), software used to control the equipment, safety, and training. Application testing of the aerosol-spray technology in mobile homes is also recommended.

  3. Recognition and development of "educational technology" as a scientific field and school subject

    Directory of Open Access Journals (Sweden)

    Danilović Mirčeta S.

    2004-01-01

    Full Text Available The paper explores the process of development, establishment and recognition of "educational technology" as an independent scientific field and a separate teaching subject at universities. The paper points to: (a the problems that this field deals with or should deal with, (b knowledge needed for the profession of "educational technologist", (c various scientific institutions across the world involved in educational technology, (d scientific journals treating issues of modern educational technology, (e the authors i.e. psychologists and educators who developed and formulated the basic principles of this scientific field, (f educational features and potentials of educational technologies. Emphasis is placed on the role and importance of AV technology in developing, establishing and recognition of educational technology, and it is also pointed out that AV technology i.e. AV teaching aids and a movement for visualization of teaching were its forerunners and crucial factors for its establishing and developing into an independent area of teaching i.e. school subject. In summary it is stressed that educational technology provides for the execution of instruction through emission transmission, selection, coding, decoding, reception, memorization transformation of all types of pieces of information in teaching.

  4. Applications of three-dimensional printing technology in the cardiovascular field.

    Science.gov (United States)

    Shi, Di; Liu, Kai; Zhang, Xin; Liao, Hang; Chen, Xiaoping

    2015-10-01

    Three-dimensional (3-D) printing technology has rapidly developed in the last few decades. Meanwhile, the application of this technology has reached beyond the engineering field and expanded to almost all disciplines, including medicine. There has been much research on the medical applications of 3-D printing in neurosurgery, orthopedics, maxillofacial surgery, plastic surgery, tissue engineering, as well as other fields. Because of the complexity of the cardiovascular system, the application of this technology is limited and difficult, as compared to other disciplines, and thus there is much room for future development. Many of the difficulties associated with this technology must be overcome. Nonetheless, there is no doubt that 3-D printing technology will benefit patients with cardiovascular diseases in the near future.

  5. Nuclear fuel technology - Administrative criteria related to nuclear criticality safety

    International Nuclear Information System (INIS)

    2004-01-01

    An effective nuclear criticality-safety programme includes cooperation among management, supervision, and the nuclear criticality-safety staff and, for each employee, relies upon conformance with operating procedures. Although the extent and complexity of safety-related activities may vary greatly with the size and type of operation with fissile material, certain safety elements are common. This International Standard represents a codification of such elements related to nuclear criticality safety. General guidance for nuclear criticality safety may be found in ISO 1709. The responsibilities of management, supervision, and the nuclear criticality-safety staff are addressed. The Objectives and characteristics of operating and emergency procedures are included in this International Standard. ISO 14943 was prepared by Technical Committee ISO/TC 85, Nuclear energy, Subcommittee SC 5, Nuclear fuel technology

  6. CTBT verification-related technologies for peaceful purposes: the French experiences of international cooperation

    International Nuclear Information System (INIS)

    Massinon, B.

    1999-01-01

    The French experience concerning CTBT verification-related technologies for peaceful purposes as well a the international cooperation in this field are presented. Possible objectives and cooperation program needs are cited. French experience in international cooperation is related to seismology and seismic hazards in Bolivia, Madagascar, Nepal and Indonesia and is considered as very constructive, meaning that technical experience is developed, consistent scientific results are obtained, and a considerable yield to the CTBT task is achieved. Large scientific benefits are expected from the CTBTO

  7. Supporting Students with Disabilities Entering the Science, Technology, Engineering, and Mathematics Field Disciplines

    Science.gov (United States)

    Dishauzi, Karen M.

    Extensive research exists on female, African American, and Hispanic students pursuing Science, Technology, Engineering and Mathematics (STEM) field disciplines. However, little research evaluates students with disabilities and career decision-making relating to STEM field disciplines. This study explored the career decision-making experiences and self-efficacy for students with disabilities. The purpose of this research study was to document experiences and perceptions of students with disabilities who pursue, and may consider pursuing, careers in the STEM field disciplines by exploring the career decision-making self-efficacy of students with disabilities. This study documented the level of influence that the students with disabilities had or may not have had encountered from parents, friends, advisors, counselors, and instructors as they managed their decision-making choice relating to their academic major/career in the STEM or non-STEM field disciplines. A total of 85 respondents of approximately 340 students with disabilities at one Midwestern public university completed a quantitatively designed survey instrument. The Career Decision-Making Self-Efficacy Scale-Short Form by Betz and Hackett was the instrument used, and additional questions were included in the survey. Data analysis included descriptive statistics and analysis of variance. Based upon the results, college students with disabilities are not currently being influenced by individuals and groups of individuals to pursue the STEM field disciplines. This is a cohort of individuals who can be marketed to increase enrollment in STEM programs at academic institutions. This research further found that gender differences at the institution under study did not affect the career decision-making self-efficacy scores. The men did not score any higher in confidence in career decision-making than the women. Disability type did not significantly affect the relationship between the Career Decision-Making Self

  8. Gravitational field of massive point particle in general relativity

    International Nuclear Information System (INIS)

    Fiziev, P.P.

    2003-10-01

    Using various gauges of the radial coordinate we give a description of the static spherically symmetric space-times with point singularity at the center and vacuum outside the singularity. We show that in general relativity (GR) there exist infinitely many such solutions to the Einstein equations which are physically different and only some of them describe the gravitational field of a single massive point particle. In particular, we show that the widespread Hilbert's form of Schwarzschild solution does not solve the Einstein equations with a massive point particle's stress-energy tensor. Novel normal coordinates for the field and a new physical class of gauges are proposed, in this way achieving a correct description of a point mass source in GR. We also introduce a gravitational mass defect of a point particle and determine the dependence of the solutions on this mass defect. In addition we give invariant characteristics of the physically and geometrically different classes of spherically symmetric static space-times created by one point mass. (author)

  9. MEDICAL ETHOS IN THE FIELD OF INTERPERSONAL RELATIONS

    Directory of Open Access Journals (Sweden)

    Edmund Anczyk

    2010-03-01

    Full Text Available The main idea of this article was to present the most popular verbal metaphors (service, calling, art used to describe medical ethos in common language and to see what impact they have on everyday clinical practice. Metaphorical ethos of a physician is defined, and then confronted with the reality of organization of medical assistance. We regard the area of interpersonal relations with the patient as a main field of realization of postulates of professional ethics (both metaphorical and those common-use postulates and codified as Codex of Medical Ethics. Also we regard the phenomenon of reification as one of the main impediments on a way of realization of medical ethos in an everyday work of a physician. In the article we conclude that even metaphorically formulated professional ethos has a substantial influence on medical practice and therapy effectiveness, and therefore can’t be underestimated, when we are determining standards of professional responsibility.

  10. Conformal Field Theory, Automorphic Forms and Related Topics

    CERN Document Server

    Weissauer, Rainer; CFT 2011

    2014-01-01

    This book, part of the series Contributions in Mathematical and Computational Sciences, reviews recent developments in the theory of vertex operator algebras (VOAs) and their applications to mathematics and physics.   The mathematical theory of VOAs originated from the famous monstrous moonshine conjectures of J.H. Conway and S.P. Norton, which predicted a deep relationship between the characters of the largest simple finite sporadic group, the Monster, and the theory of modular forms inspired by the observations of J. MacKay and J. Thompson.   The contributions are based on lectures delivered at the 2011 conference on Conformal Field Theory, Automorphic Forms and Related Topics, organized by the editors as part of a special program offered at Heidelberg University that summer under the sponsorship of the MAThematics Center Heidelberg (MATCH).

  11. Mathematical Methods For Students of Physics and Related Fields

    CERN Document Server

    Hassani, Sadri

    2009-01-01

    Intended to follow the usual introductory physics courses, this book has the unique feature of addressing the mathematical needs of sophomores and juniors in physics, engineering and other related fields. Many original, lucid, and relevant examples from the physical sciences, problems at the ends of chapters, and boxes to emphasize important concepts help guide the student through the material. Beginning with reviews of vector algebra and differential and integral calculus, the book continues with infinite series, vector analysis, complex algebra and analysis, ordinary and partial differential equations. Discussions of numerical analysis, nonlinear dynamics and chaos, and the Dirac delta function provide an introduction to modern topics in mathematical physics. This new edition has been made more user-friendly through organization into convenient, shorter chapters. Also, it includes an entirely new section on Probability and plenty of new material on tensors and integral transforms. Some praise for the previo...

  12. Mathematical methods for students of physics and related fields

    CERN Document Server

    Hassani, Sadri

    2000-01-01

    Intended to follow the usual introductory physics courses, this book has the unique feature of addressing the mathematical needs of sophomores and juniors in physics, engineering and other related fields Many original, lucid, and relevant examples from the physical sciences, problems at the ends of chapters, and boxes to emphasize important concepts help guide the student through the material Beginning with reviews of vector algebra and differential and integral calculus, the book continues with infinite series, vector analysis, complex algebra and analysis, ordinary and partial differential equations Discussions of numerical analysis, nonlinear dynamics and chaos, and the Dirac delta function provide an introduction to modern topics in mathematical physics This new edition has been made more user-friendly through organization into convenient, shorter chapters Also, it includes an entirely new section on Probability and plenty of new material on tensors and integral transforms Some praise for the previous edi...

  13. Probing strong-field general relativity near black holes

    CERN Multimedia

    CERN. Geneva; Alvarez-Gaumé, Luís

    2005-01-01

    Nature has sprinkled black holes of various sizes throughout the universe, from stellar mass black holes in X-ray sources to supermassive black holes of billions of solar masses in quasars. Astronomers today are probing the spacetime near black holes using X-rays, and gravitational waves will open a different view in the near future. These tools give us an unprecedented opportunity to test ultra-strong-field general relativity, including the fundamental theorem of the uniqueness of the Kerr metric and Roger Penrose's cosmic censorship conjecture. Already, fascinating studies of spectral lines are showing the extreme gravitational lensing effects near black holes and allowing crude measurements of black hole spin. When the ESA-NASA gravitational wave detector LISA begins its observations in about 10 years, it will make measurements of dynamical spacetimes near black holes with an accuracy greater even than that which theoreticians can reach with their computations today. Most importantly, when gravitational wa...

  14. International cooperation in highly technological fields, especially in the field of aeronautics and astronautics and nuclear engineering

    International Nuclear Information System (INIS)

    Schunk, G.

    1982-01-01

    The subject of the study is the analysis of Research and Development (RandD) cooperation in highly technological fields. The study deals in particular with the reasons for cooperation, the aims and types of cooperation, with cooperating partners, as well as with alternative solutions and possible future developments. Special attention is given to those factors, which necessitate cooperation, and to aspects of possible alternatives and future developments. (orig.) [de

  15. Field application of smart SHM using field programmable gate array technology to monitor an RC bridge in New Mexico

    International Nuclear Information System (INIS)

    Azarbayejani, M; Jalalpour, M; Reda Taha, M M; El-Osery, A I

    2011-01-01

    In this paper, an innovative field application of a structural health monitoring (SHM) system using field programmable gate array (FPGA) technology and wireless communication is presented. The new SHM system was installed to monitor a reinforced concrete (RC) bridge on Interstate 40 (I-40) in Tucumcari, New Mexico. This newly installed system allows continuous remote monitoring of this bridge using solar power. Details of the SHM component design and installation are discussed. The integration of FPGA and solar power technologies make it possible to remotely monitor infrastructure with limited access to power. Furthermore, the use of FPGA technology enables smart monitoring where data communication takes place on-need (when damage warning signs are met) and on-demand for periodic monitoring of the bridge. Such a system enables a significant cut in communication cost and power demands which are two challenges during SHM operation. Finally, a three-dimensional finite element (FE) model of the bridge was developed and calibrated using a static loading field test. This model is then used for simulating damage occurrence on the bridge. Using the proposed automation process for SHM will reduce human intervention significantly and can save millions of dollars currently spent on prescheduled inspection of critical infrastructure worldwide

  16. Boutiquing at the Raindance Campout: Relational Aesthetics as Festival Technology

    Directory of Open Access Journals (Sweden)

    Bryan Schmidt

    2015-06-01

    Full Text Available This article uses Nicholas Bourriaud’s theorizing of “relational aesthetics” to consider the mechanics that facilitate strong subcultural ties amongst participants of small-scale, “boutique” festivals. Relational aesthetics describes art that takes human interaction as its theoretical horizon, where art works are envisioned primarily as social interstices. Using California’s Raindance Campout as a case study, I argue that festivals may be viewed as a form of relational art, where organizers create environments that prompt meaningful human performance. Building on critiques of the revolutionary energy Bourriaud invests in his concept, I propose that we might productively understand relational aesthetics as an indeterminate technology always adaptable to particular political ideologies. I use art present at Raindance to illuminate some of the event’s unspoken political prerogatives; despite attempting to disassociate from the ethos of a perceived US mainstream, I argue that Raindance still coincides with logics of modern liberalism including consumerism and cultural appropriation.

  17. Relation between magnetic fields and electric currents in plasmas

    Directory of Open Access Journals (Sweden)

    V. M. Vasyliunas

    2005-10-01

    Full Text Available Maxwell's equations allow the magnetic field B to be calculated if the electric current density J is assumed to be completely known as a function of space and time. The charged particles that constitute the current, however, are subject to Newton's laws as well, and J can be changed by forces acting on charged particles. Particularly in plasmas, where the concentration of charged particles is high, the effect of the electromagnetic field calculated from a given J on J itself cannot be ignored. Whereas in ordinary laboratory physics one is accustomed to take J as primary and B as derived from J, it is often asserted that in plasmas B should be viewed as primary and J as derived from B simply as (c/4π∇×B. Here I investigate the relation between ∇×B and J in the same terms and by the same method as previously applied to the MHD relation between the electric field and the plasma bulk flow vmv2001: assume that one but not the other is present initially, and calculate what happens. The result is that, for configurations with spatial scales much larger than the electron inertial length λe, a given ∇×B produces the corresponding J, while a given J does not produce any ∇×B but disappears instead. The reason for this can be understood by noting that ∇×B≠4π/cJ implies a time-varying electric field (displacement current which acts to change both terms (in order to bring them toward equality; the changes in the two terms, however, proceed on different time scales, light travel time for B and electron plasma period for J, and clearly the term changing much more slowly is the one that survives. (By definition, the two time scales are equal at λe. On larger scales, the evolution of B (and hence also of ∇×B is governed by

  18. U.S., Japan Approach New Era in Science and Technology Relations.

    Science.gov (United States)

    Lepkowski, Wil

    1988-01-01

    Discusses the status of U.S.-Japan relations regarding science and technology. Describes Japan's science and technology structure. Outlines trends in cooperation and competition for the technology market between the U.S. and Japan. (CW)

  19. Relative longevity and field metabolic rate in birds.

    Science.gov (United States)

    Møller, A P

    2008-09-01

    Metabolism is a defining feature of all living organisms, with the metabolic process resulting in the production of free radicals that can cause permanent damage to DNA and other molecules. Surprisingly, birds, bats and other organisms with high metabolic rates have some of the slowest rates of senescence begging the question whether species with high metabolic rates also have evolved mechanisms to cope with damage induced by metabolism. To test whether species with the highest metabolic rates also lived the longest I determined the relationship between relative longevity (maximum lifespan), after adjusting for annual adult survival rate, body mass and sampling effort, and mass-specific field metabolic rate (FMR) in 35 species of birds. There was a strongly positive relationship between relative longevity and FMR, consistent with the hypothesis. This conclusion was robust to statistical control for effects of potentially confounding variables such as age at first reproduction, latitude and migration distance, and similarity in phenotype among species because of common phylogenetic descent. Therefore, species of birds with high metabolic rates senesce more slowly than species with low metabolic rates.

  20. New progress in wastewater treatment technology for standard-reaching discharge in sour gas fields

    Directory of Open Access Journals (Sweden)

    Jie Yang

    2018-02-01

    Full Text Available Gas field water is generally characterized by complex contaminant components and high salinity. Its proper treatment has always been the great concern in the field of environmental protection of oil & gas fields. In this paper, the wastewater from a gas field in the Sichuan Basin with high salinity and more contaminants (e.g. sulfides was treated as a case study for the standard-reaching discharge. Lab experiments were carried out to analyze the adaptability and effectiveness of coagulation–desulfurization composite treatment technology, chemical oxidation based ammonia nitrogen removal technology and cryogenic multi-efficacy distillation technology in the treatment of wastewater in this field. The results show that the removal rate of sulfides and oils is over 90% if polymeric ferric sulfate (PFS is taken as the coagulant combined with TS-1 desulfurization agent. Besides, the removal rate of ammonia nitrogen is over 96% if CA-1 is taken as the oxidant. Finally, after the gas field water is treated by means of cryogenic three-efficacy distillation technology, chloride concentration of distilled water is below 150 mg/L and CODcr concentration is less than 60 mg/L. It is concluded that after the whole process treatment, the main contaminant indicators of wastewater in this case study can satisfy the grade one standard specified in the Integrated Wastewater Discharge Standard (GB 8978–1996 and the chloride concentration can meet the requirement of the Standards for Irrigation Water Quality (GB 5084–2005. To sum up, the above mentioned composite technologies are efficient to the wastewater treatment in sour gas fields. Keywords: Sulfide-bearing gas field water, Coagulation, Desulfurization, Chemical oxidation, Standard discharge, Ammonia nitrogen, Chloride, Cryogenic multi-efficacy distillation, Sichuan Basin

  1. PISCES: An Integral Field Spectrograph Technology Demonstration for the WFIRST Coronagraph

    Science.gov (United States)

    McElwain, Michael W.; Mandell, Avi M.; Gong, Qian; Llop-Sayson, Jorge; Brandt, Timothy; Chambers, Victor J.; Grammer, Bryan; Greeley, Bradford; Hilton, George; Perrin, Marshall D.; hide

    2016-01-01

    We present the design, integration, and test of the Prototype Imaging Spectrograph for Coronagraphic Exoplanet Studies (PISCES) integral field spectrograph (IFS). The PISCES design meets the science requirements for the Wide-Field Infra Red Survey Telescope (WFIRST) Coronagraph Instrument (CGI). PISCES was integrated and tested in the integral field spectroscopy laboratory at NASA Goddard. In June 2016, PISCES was delivered to the Jet Propulsion Laboratory (JPL) where it was integrated with the Shaped Pupil Coronagraph (SPC) High Contrast Imaging Testbed (HCIT). The SPC/PISCES configuration will demonstrate high contrast integral field spectroscopy as part of the WFIRST CGI technology development program.

  2. Stopping electric field extension in a modified nanostructure based on SOI technology - A comprehensive numerical study

    Science.gov (United States)

    Anvarifard, Mohammad K.; Orouji, Ali A.

    2017-11-01

    This article has related a particular knowledge in order to reduce short channel effects (SCEs) in nano-devices based on silicon-on-insulator (SOI) MOSFETs. The device under study has been designed in 22 nm node technology with embedding Si3N4 extra oxide as a stopping layer of electric field and a useful heatsink for transferring generated heat. Two important subjects (DC characteristics and RF characteristics) have been investigated, simultaneously. Stopping electric field extension and enhancement of channel thermal conduction are introduced as an entrance gateway for this work so that improve the electrical characteristics, eventually. The inserted extra oxide made by the Si3N4 material has a vital impact on the modification of the electrical and thermal features in the proposed device. An immense comparison between the proposed SOI and conventional SOI showed that the proposed structure has higher electrical and thermal proficiency than the conventional structure in terms of main parameters such as short channel effects (SCEs), leakage current, floating body effect (FBE), self-heating effect (SHE), voltage gain, ratio of On-current to Off- current, transconductance, output conductance, minimum noise figure and power gain.

  3. Advances in Proteomic Technologies and Its Contribution to the Field of Cancer

    Directory of Open Access Journals (Sweden)

    Mehdi Mesri

    2014-01-01

    Full Text Available Systematic studies of the cancer genome have generated a wealth of knowledge in recent years. These studies have uncovered a number of new cancer genes not previously known to be causal targets in cancer. Genetic markers can be used to determine predisposition to tumor development, but molecularly targeted treatment strategies are not widely available for most cancers. Precision care plans still must be developed by understanding and implementing basic science research into clinical treatment. Proteomics is continuing to make major strides in the discovery of fundamental biological processes as well as more recent transition into an assay platform capable of measuring hundreds of proteins in any biological system. As such, proteomics can translate basic science discoveries into the clinical practice of precision medicine. The proteomic field has progressed at a fast rate over the past five years in technology, breadth and depth of applications in all areas of the bioscience. Some of the previously experimental technical approaches are considered the gold standard today, and the community is now trying to come to terms with the volume and complexity of the data generated. Here I describe contribution of proteomics in general and biological mass spectrometry in particular to cancer research, as well as related major technical and conceptual developments in the field.

  4. Everything's Relative: And Other Fables from Science and Technology

    Science.gov (United States)

    Rothman, Tony

    2003-09-01

    The surprising truth behind many of the most cherished "facts" in science history Morse invented the telegraph, Bell the telephone, Edison the light bulb, and Marconi the radio . . . right? Well . . . the truth is slightly more complicated. The history of science and technology is riddled with apocrypha, inaccuracies, and falsehoods, and physicist Tony Rothman has taken it upon himself to throw a monkey wrench into the works. Combining a storyteller's gifts with a scientist's focus and hardheaded devotion to the facts-such as they may be-Rothman breaks down many of the most famous "just-so" stories of physics, astronomy, chemistry, biology, and technology to give credit where credit is truly due. From Einstein's possible misunderstanding of his own theories to actress Hedy Lemarr's role in the invention of the radio-controlled torpedo, he dredges his way through the legends of science history in relating the fascinating stories behind some of the most important, and often unsung, breakthroughs in science. Tony Rothman, PhD (Bryn Mawr, PA), is a Research Associate at Bryn Mawr College. He is the author of seven other critically acclaimed science books and a frequent contributor to leading science publications, including Scientific American and Discover.

  5. Smoking cessation: Exploration of perceived technology-related information value.

    Science.gov (United States)

    Reychav, Iris; McHaney, Roger; Hirak, Eyal; Merker, Ben

    2018-01-01

    This study describes a unique approach to information transfer affecting the perceived value of this information and related impact on smoker behavior. Data were collected via survey, sampling approximately 120 participants. An online survey tool was used for the survey creation, data collection and monitoring. Another online tool was used by participants to create short animation videos as a means of increasing their engagement with information in an experiential fashion. Study findings included that the process experienced by the test group was influential and facilitated participants' change of mind regarding enrollment in a smoking cessation workshop. This was partly attributable to the IKEA effect. The study provides evidence that a change in habits crucial to improve health and enhance positive lifestyle choices can be stimulated through active engagement with artifact creation in a technology-mediated environment.

  6. Field-Flow Fractionation of Carbon Nanotubes and Related Materials

    Energy Technology Data Exchange (ETDEWEB)

    John P. Selegue

    2011-11-17

    During the grant period, we carried out FFF studies of carbonaceous soot, single-walled and multi-walled carbon nanotubes, carbon nano-onions and polyoxometallates. FFF alone does not provide enough information to fully characterize samples, so our suite of characterization techniques grew to include light scattering (especially Photon Correlation Spectroscopy), scanning and transmission electron microscopy, thermogravimetric analysis and spectroscopic methods. We developed convenient techniques to deposit and examine minute FFF fractions by electron microscopy. In collaboration with Arthur Cammers (University of Kentucky), we used Flow Field-Flow Fractionation (Fl-FFF) to monitor the solution-phase growth of keplerates, a class of polyoxometallate (POM) nanoparticles. We monitored the evolution of Mo-POM nanostructures over the course of weeks by by using flow field-flow fractionation and corroborated the nanoparticle structures by using transmission electron microscopy (TEM). Total molybdenum in the solution and precipitate phases was monitored by using inductively coupled plasma analyses, and total Mo-POM concentration by following the UV-visible spectra of the solution phase. We observe crystallization-driven formation of (Mo132) keplerate and solution phase-driven evolution of structurally related nanoscopic species (3-60 nm). FFF analyses of other classes of materials were less successful. Attempts to analyze platelets of layered materials, including exfoliated graphite (graphene) and TaS2 and MoS2, were disappointing. We were not able to optimize flow conditions for the layered materials. The metal sulfides react with the aqueous carrier liquid and settle out of suspension quickly because of their high density.

  7. Symmetries in tetrad theories. [of gravitational fields and general relativity

    Science.gov (United States)

    Chinea, F. J.

    1988-01-01

    The isometry conditions for gravitational fields are given directly at the tetrad level, rather than in terms of the metric. As an illustration, an analysis of the curvature collineations and Killing fields for a twisting type-N vacuum gravitational field is made.

  8. Cost comparison of laboratory methods and four field screening technologies for uranium-contaminated soil

    International Nuclear Information System (INIS)

    Douthat, D.M.; Armstrong, A.Q.

    1994-01-01

    To address the problem of characterizing uranium-contaminated surface soil at federal facilities, the Department of Energy has the development of four uranium field screening technologies, under the direction of the Uranium-in-Soils Integrated Demonstration (USID) Program. These four technologies include: a long-range alpha detector a beta scintillation detector, an in situ gamma detector, and a mobile laser ablation-inductively coupled plasma/atomic emission spectrometry (LA-ICP/AES) laboratory. As part of the performance assessment for these field screening technologies, cost estimates for the development and operation of each technology were created. A cost study was conducted to compare three of the USID field screening technologies to the use of traditional field surveying equipment to adequately characterize surface soils of a one-acre site. The results indicate that the use of traditional equipment costs more than the in situ gamma detector, but less than the beta scintillation detector and LRAD. The use of traditional field surveying equipment results in cost savings of 4% and 34% over the use of the beta scintillation and LRAD technologies, respectively. A study of single-point surface soil sampling and laboratory analysis costs was also conducted. Operational costs of the mobile LA-ICP/AES laboratory were compared with operational costs of traditional sampling and analysis, which consists of collecting soil samples and conducting analysis in a radiochemical laboratory. The cost study indicates that the use of the mobile LA-ICP/AES laboratory results in cost savings of 23% and 40% over traditional field sampling and laboratory analysis conducted by characterization groups at two DOE facilities

  9. Investigation of an innovative technology for oil-field brine treatment

    Energy Technology Data Exchange (ETDEWEB)

    Miskovic, D.; Dalmacija, B.; Hain, Z.; Karlovic, E.; Maric, S.; Uzelac, N. (Inst. of Chemistry, Faculty of Sciences, V. Vlahovica 2 (YU))

    1989-01-01

    Various aspects of an innovative technology for oil field brine treatment were investigated on a laboratory scale. The both free and dispersed oily matter were separated by gravitation and sedimentation. Apart from the physico-chemical oil removal process, special attention was paid to different variants of improved microbiological treatment: dilution with fresh water and application of powdered activated carbon (PAC). Advanced treatment was carried out on granular biological activated carbon (GBAC). A technological scheme for complete treatment was proposed. (author).

  10. Probing Strong-field General Relativity with Gravitational Waves

    Science.gov (United States)

    Pretorius, Frans

    We are on the verge of a new era in astrophysics as a world-wide effort to observe the universe with gravitational waves takes hold---ground based laser interferometers (Hz to kHz), pulsar timing (micro to nano Hz), measurements of polarization of the cosmic microwave background (sub-nano Hz), and the planned NASA/ESA mission LISA (.1 mHz to .1 Hz). This project will study the theoretical nature of gravitational waves (GWs) emitted by two sources in the LISA band, namely supermassive-black-hole (SMBH) binary mergers, and extreme-mass-ratio-inspirals (EMRI's)---the merger of a stellar mass black hole, neutron star, or white dwarf with a SMBH. The primary goal will be to ascertain how well LISA, by observing these sources, could answer the following related questions about the fundamental nature of strong-field gravity: Does Einstein's theory of general relativity (GR) describe the geometry of black holes in the universe? What constraints can GW observations of SMBH mergers and EMRIs place on alternative theories of gravity? If there are deviations from GR, are there statistics that could give indications of a deviation if sources are detected using a search strategy based solely on GR waveforms? The primary reasons for focusing on LISA sources to answer these questions are (a) binary SMBH mergers could be detected by LISA with exquisitely high signal-to- noise, allowing enough parameters of the system to be accurately extracted to perform consistency checks of the underlying theory, (b) EMRIs will spend numerous orbits close to the central black hole, and thus will be quite sensitive to even small near-horizon deviations from GR. One approach to develop the requisite knowledge and tools to answer these questions is to study a concrete, theoretically viable alternative to GR. We will focus on the dynamical variant of Chern-Simons modified gravity (CSMG), which is interesting for several reasons, chief among which are (1) that CSMG generically arises in both string

  11. Education related to the field of (intellectual) disability - we have to do better!

    DEFF Research Database (Denmark)

    Nørgaard, Britta Kusk

    that this is the result. My findings show different perspectives in this field that are very rarely in focus of any research. Structural barriers are quite important. Among others educational gaps - in general - but also more specific on e.g. ethics and knowledge of legislation. Adults with intellectual disability...... to secure suitable education to ensure that the intentions in the conventions can be fulfilled and to raise a general awareness. Looking into educational orders in Denmark for professional bachelors in this area it seems not at all evident, that this is going to happen. For all programs it relates...... and education – material and technological conditions and consequences – cannot be seen without a basic knowledge of and education in the field of intellectual disability including a level of values and ethics! Otherwise – as my research also shows – you might end up with easy and technical fix’es and solutions...

  12. Contemporary Applications of Shariah Maxims Related to Needs and Necessities in Medical Field(Urdu

    Directory of Open Access Journals (Sweden)

    Dr. Hafiz Aziz ur Raḥman

    2017-07-01

    Full Text Available Emergence of biomedical research and innovation with an unprecedented speed has created number of opportunities and challenges for policy makers. On the one hand, it is now possible to introduce tailor-made personal medication regime for an ailing patient to offer state of the art treatments. On the other hand, several ethical and legal issues have been raised due to the complex nature of emerging technologies. Policy makers all over the world are constantly addressing these challenges by continuously upgrading their respective professional and regulatory frameworks. This article is an attempt to highlight Shariah maxims which have contemporary application in medical field. Lately, there has been a lot of interest in the debate of Shariah maxims and many scholars have used maxims-based analytical frameworks to show the dynamic application of Islamic law. This article builds upon those works by focusing on issues related to the medical field.

  13. Inventory of environmental impact models related to energy technologies

    International Nuclear Information System (INIS)

    Owen, P.T.; Dailey, N.S.; Johnson, C.A.; Martin, F.M.

    1979-02-01

    The purpose of this inventory is to identify and collect data on computer simulations and computational models related to the environmental effects of energy source development, energy conversion, or energy utilization. Information for 33 data fields was sought for each model reported. All of the information which could be obtained within the time alloted for completion of the project is presented for each model listed. Efforts will be continued toward acquiring the needed information. Readers who are interested in these particular models are invited to contact ESIC for assistance in locating them. In addition to the standard bibliographic information, other data fields of interest to modelers, such as computer hardware and software requirements, algorithms, applications, and existing model validation information, are included. Indexes are provided for contact person, acronym, keyword, and title. The models are grouped into the following categories: atmospheric transport, air quality, aquatic transport, terrestrial food chains, soil transport, aquatic food chains, water quality, dosimetry, and human effects, animal effects, plant effects, and generalized environmental transport. Within these categories, the models are arranged alphabetically by last name of the contact person

  14. Inventory of environmental impact models related to energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Owen, P.T.; Dailey, N.S.; Johnson, C.A.; Martin, F.M. (eds.)

    1979-02-01

    The purpose of this inventory is to identify and collect data on computer simulations and computational models related to the environmental effects of energy source development, energy conversion, or energy utilization. Information for 33 data fields was sought for each model reported. All of the information which could be obtained within the time alloted for completion of the project is presented for each model listed. Efforts will be continued toward acquiring the needed information. Readers who are interested in these particular models are invited to contact ESIC for assistance in locating them. In addition to the standard bibliographic information, other data fields of interest to modelers, such as computer hardware and software requirements, algorithms, applications, and existing model validation information, are included. Indexes are provided for contact person, acronym, keyword, and title. The models are grouped into the following categories: atmospheric transport, air quality, aquatic transport, terrestrial food chains, soil transport, aquatic food chains, water quality, dosimetry, and human effects, animal effects, plant effects, and generalized environmental transport. Within these categories, the models are arranged alphabetically by last name of the contact person.

  15. Lateral Flow Technology for Field-Based Applications-Basics and Advanced Developments.

    Science.gov (United States)

    O׳Farrell, Brendan

    2015-12-01

    In terms of their ability to provide accurate information there is a traditional continuum in diagnostics that ranges from highly accurate methods requiring infrastructure and a centralized approach to testing to less accurate technologies that can be used in a decentralized or point of care testing strategy and that require little to no supporting infrastructure. Today's lateral flow assays marry the utility of a truly field deployable, simple to use technology with the high performance of many laboratory based assay formats. Advances in recent years have allowed for the extension of performance of lateral flow assays into applications that require high accuracy and sensitivity while still maintaining the advantages of the technology from the perspective of infrastructure requirements and user friendliness. This has allowed for improved application of this technology in decentralized testing environments; veterinary, medical and otherwise. The lateral flow assay, once considered less accurate and less capable than infrastructure-heavy, laboratory based formats, is being viewed more and more as a truly versatile technology, capable of more than adequate performance at all ends of the diagnostic continuum. This article discusses the state of the art in lateral flow technology and outlines the utility of the technology in a variety of field based applications. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Should we be afraid of magnetic fields related to electricity?

    International Nuclear Information System (INIS)

    Souques, M.

    2009-01-01

    After having recalled that the main sources of 50 Hz electric field are high voltage lines while such a field around any electrical equipment is null because of a presence of insulation, the author comments the magnetic field level at the vicinity of common electrical equipment (refrigerator, hi-fi, computer, television, and so on) and at some distance (30 or 100 meters) of high-voltage and low-voltage lines. She comments the knowledge on the effects of exposure to a 50 Hz magnetic field, and recalls that a publication suggested in 1979 that there was a risk of leukaemia for children living close to electrical lines. More recent studies proposed to apply to magnetic fields an existing classification of products with respect to cancer risk (known, likely, possible, insufficient knowledge, not carcinogen). Some studies put the risk of leukaemia associated to magnetic fields into question again

  17. Problems related to macroscopic electric fields in the magnetosphere

    International Nuclear Information System (INIS)

    Faelthammar, C.

    1977-01-01

    The macroscopic electric fields in the magnetosphere originate from internal as well as external sources. The fields are intimately coupled with the dynamics of magnetospheric plasma convection. They also depend on the complicated electrical properties of the hot collisionless plasma. Macroscopic electric fields are responsible for some important kinds of energization of charged particles that take place in the magnetosphere and affect not only particles of auroral energy but also, by multistep processes, trapped high-energy particles. A particularly interesting feature of magnetospheric electric fields is that they can have substantial components along the geomagnetic field, as has recently been confirmed by observations. Several physical mechanisms have been identified by which such electric fields can be supported even when collisions between particles are negligible. Comments are made on the magnetic mirror effect, anomalous resistivity, the collisionless thermoelectric effect, and electric double layers, emphasizing key features and differences and their significance in the light of recent observational data

  18. Empirical study of the perceived ease of use and relative advantage on load-bearing masonry (LBM) technology adoption

    Science.gov (United States)

    Ramli, Nor Azlinda; Abdullah, Che Sobry; Nawi, Mohd Nasrun Mohd

    2017-11-01

    Load-bearing masonry (LBM) technology has been identified as an alternative method that can potentially encourage the sustainability of the housing industry. The adoption of LBM technology is believed to bring beneficial effects to the housing industry as well as company productivity. The factors related to the adoption LBM technology was revealed to strongly influence the implementation of this system in the housing industry. The aim of this study is to determine the factors influencing the adoption of LBM technology among the developer firms in Malaysia as well as the factors that are highly related to perceived ease of use and relative advantage. A random sampling technique was applied and a questionnaire-based field survey was carried out to obtain the data from the respondents. All the data were analyzed using Partial Least Squares Structural Equation Modeling (PLS-SEM). The findings of this paper have revealed that perceived ease of use and relative advantage are related to the adoption of LBM technology. The findings also indicated the validity of Technology Acceptance Model TAM (perceived ease of use) and Innovation Diffusion Theory IDT (relative advantage) as the determinant factors in the adoption of LBM technology. Finally, some recommendations for future research are suggested in the final section of this paper.

  19. Analyzing the Curricula of Doctor of Philosophy in Educational Technology-Related Programs in the United States

    Science.gov (United States)

    Almaden, Abdullah; Ku, Heng-Yu

    2017-01-01

    The purpose of this study was to analyze on-campus and online PhD programs in educational technology-related fields in the United States. In particular, it sought to evaluate the most common program titles; core, elective, and research courses based on program curricula. The research design was quantitative content analysis and data were collected…

  20. A chiral alternative to the vierbein field in general relativity

    NARCIS (Netherlands)

    Hooft, G. 't

    1991-01-01

    An alternative to the usual vierbein field in a (3 + 1)-dimensional (euclidean) space-time is proposed such that the internal index takes only three values and the external is a double: ea = −ea. In flat space-time this field reduces to the self-dual generalized Levi-Civita symbol a. Like the

  1. FIELD DEMONSTRATION OF EMERGING PIPE WALL INTEGRITY ASSESSMENT TECHNOLOGIES FOR LARGE CAST IRON WATER MAINS

    Science.gov (United States)

    The U.S. Environmental Protection Agency sponsored a large-scale field demonstration of innovative leak detection/location and condition assessment technologies on a 76-year old, 2,500-ft long, cement-lined, 24-in. cast iron water main in Louisville, KY from July through Septembe...

  2. Field Demonstration of Emerging Pipe Wall Integrity Assessment Technologies for Large Cast Iron Water Mains - Paper

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) sponsored a large-scale field demonstration of innovative leak detection/location and condition assessment technologies on a 76-year old, 2,000-ft long, cement-lined, 24-in. cast-iron water main in Louisville, KY from July through Se...

  3. Model of educational field on the basis of technology of knowledge management

    Directory of Open Access Journals (Sweden)

    Виталий Алексеевич Кудинов

    2010-03-01

    Full Text Available The paper presents an approach to the description of educational field-based technologies for knowledge management. Two level system of knowledge representation, including the concepts of knowledge and training facilities is proposed. Such organization allows corporate knowledge management portal to easily adapt training to the individual needs of a learner.

  4. A Content Analysis of Dissertations in the Field of Educational Technology: The Case of Turkey

    Science.gov (United States)

    Durak, Gurhan; Cankaya, Serkan; Yunkul, Eyup; Misirli, Zeynel Abidin

    2018-01-01

    The present study aimed at conducting content analysis on dissertations carried out so far in the field of Educational Technology in Turkey. A total of 137 dissertations were examined to determine the key words, academic discipline, research areas, theoretical frameworks, research designs and models, statistical analyses, data collection tools,…

  5. Field Demonstration of Innovative Condition Assessment Technologies for Water Mains: Leak Detection and Location

    Science.gov (United States)

    Three leak detection/location technologies were demonstrated on a 76-year-old, 2,057-ft-long portion of a cement-lined, 24-in. cast iron water main in Louisville, KY. This activity was part of a series of field demonstrations of innovative leak detection/location and condition a...

  6. Preservice Science Teachers' Field Experiences with Educational Technologies as Part of Portfolio Development: A Turkish Perspective

    Science.gov (United States)

    Korkmaz, Hunkar; Gucum, Berna; Hakverdi, Meral

    2006-01-01

    The purpose of this study is to assess the usage of educational technology of pre-service science teachers in their field experiences. This study was carried out on 45 pre-service science teachers taking School Experience and Practice Teaching courses at Hacettepe University in Turkey. The data were obtained from the evaluation of pre-service…

  7. Computer-based measurement and automatizatio aplication research in nuclear technology fields

    International Nuclear Information System (INIS)

    Jiang Hongfei; Zhang Xiangyang

    2003-01-01

    This paper introduces computer-based measurement and automatization application research in nuclear technology fields. The emphasis of narration are the role of software in the development of system, and the network measurement and control software model which has optimistic application foreground. And presents the application examples of research and development. (authors)

  8. Reflecting on the Challenges of Informal Contexts: Early Field Experiences with Technology in Teacher Education

    Science.gov (United States)

    Lux, Nick; Obery, Amanda; Cornish, Jamie; Grimberg, Bruna Irene; Hartshorn, Anthony

    2017-01-01

    Early field experiences, or those that come early in a teacher's preparation before more formalized opportunities like practicum and student teaching, can provide a venue for pre service teachers to practice technology-specific instructional decision-making and reflective practice. Although research exists on the potential roles of field…

  9. Utilizing Geo-Referenced Mobile Game Technology for Universally Accessible Virtual Geology Field Trips

    Science.gov (United States)

    Bursztyn, Natalie; Pederson, Joel; Shelton, Brett; Walker, Andrew; Campbell, Todd

    2015-01-01

    Declining interest and low persistence is well documented among undergraduate students in Science, Technology, Engineering, and Math in the United States. For geoscience, field trips are important attractors to students, however with high enrollment courses and increasing costs they are becoming rare. We propose in this concept paper that the…

  10. The Developing Field of Technology Education: A Review to Look Forward

    Science.gov (United States)

    Jones, Alister; Buntting, Cathy; de Vries, Marc J.

    2013-01-01

    This paper attempts to review the development of technology education over the last 20-25 years. The purpose is to reflect on how far the field has come and where it might go to, including what questions need to be considered in its ongoing development. The data for this paper draw on our work in developing "The International Handbook of Research…

  11. Current Trends in Sustainability of Bitcoins and Related Blockchain Technology

    Directory of Open Access Journals (Sweden)

    Pasquale Giungato

    2017-11-01

    Full Text Available Bitcoin is a digital currency based on a peer-to-peer payment system managed by an open source software and characterized by lower transaction costs, greater security and scalability than fiat money and no need of a central bank. Despite criticisms about illegal uses and social consequences, it is attracting the interest of the scientific community. The purpose of this work is to define and evaluate the current trends of the literature concerned with the sustainability of bitcoin, considering the environmental impacts, social issues and economic aspects. From the analysis it emerges that the transition of the whole monetary system in the new cryptocurrency will result in an unacceptable amount of energy consumed to mine new bitcoins and to maintain the entire virtual monetary system, and probably bitcoin will remain a niche currency. Blockchain, which is the base for a distributed and democratically-sustained public ledger of the transactions, could foster new and challenging opportunities. Sharing the framework of medical data, energy generation and distribution in micro-grids at the citizen level, block-stack and new state-driven cryptocurrencies, may benefit from the wide spread of blockchain-based transactions. Under the perspective of its being a driver of social change, bitcoins and related blockchain technologies may overcome the issues highlighted by numerous detractors.

  12. Concepts of Comprehensive PNT and Related Key Technologies

    Directory of Open Access Journals (Sweden)

    YANG Yuanxi

    2016-05-01

    Full Text Available The core idea of comprehensive positioning, navigation and time (PNT is the technique that uses all the available resources to provide PNT services in the whole area, including inside and outside door, air, space, under water and underground, which does not solely rely on the GNSS. The definition and basic concepts of the comprehensive PNT are presented. The possible signal sources are listed. The core technologies related to the comprehensive PNT are analyzed, including the integration of the multiple sensors and adaptive data fusion for multiple PNT signals. It is emphasized that the information of the comprehensive PNT should be from "multiple sources based on different physical principles", the control system should be operated by voluntary users based on cloud platform, the user terminals or sensors should be "deeply integrated" and the PNT information should be "adaptively fused" and serve mode might be based on cloud platform. The comprehensive PNT system should meet the robust availability, continuity, high accuracy and reliability with unified geodetic datum and time datum.

  13. Tools and Technologies Needed for Conducting Planetary Field Geology While On EVA: Insights from the 2010 Desert RATS Geologist Crewmembers

    Science.gov (United States)

    Young, Kelsey; Hurtado, Jose M., Jr.; Bleacher, Jacob E.; Garry, W. Brent; Bleisath, Scott; Buffington, Jesse; Rice, James W., Jr.

    2011-01-01

    Observation is the primary role of all field geologists, and geologic observations put into an evolving conceptual context will be the most important data stream that will be relayed to Earth during a planetary exploration mission. Sample collection is also an important planetary field activity, and its success is closely tied to the quality of contextual observations. To test protocols for doing effective planetary geologic fieldwork, the Desert RATS (Research and Technology Studies) project deployed two prototype rovers for two weeks of simulated exploratory traverses in the San Francisco volcanic field of northern Arizona. The authors of this paper represent the geologist crewmembers who participated in the 2010 field test. We document the procedures adopted for Desert RATS 2010 and report on our experiences regarding these protocols. Careful consideration must be made of various issues that impact the interplay between field geologic observations and sample collection, including time management; strategies related to duplication of samples and observations; logistical constraints on the volume and mass of samples and the volume/transfer of data collected; and paradigms for evaluation of mission success. We find that the 2010 field protocols brought to light important aspects of each of these issues, and we recommend best practices and modifications to training and operational protocols to address them. Underlying our recommendations is the recognition that the capacity of the crew to "flexibly execute" their activities is paramount. Careful design of mission parameters, especially field geologic protocols, is critical for enabling the crews to successfully meet their science objectives.

  14. Event-related potentials in adolescents with different cognitive styles: field dependence and field independence.

    Science.gov (United States)

    Meng, Xianghong; Mao, Wei; Sun, Wei; Zhang, Xiating; Han, Chunyu; Lu, Changfeng; Huang, Zhaoyang; Wang, Yuping

    2012-01-01

    Field dependence/independence (FD/FI) is an important dimension of personality and cognitive styles. Different ability in mobilizing and/or allocating mental-attentional capacity was considered to be the most possible explanation for the FDI cognitive style. Many studies on characterizing the functional neuroanatomy of attentional control indicated the existence of a dissociable sub-process of conflict-monitoring and "cognitive control" system. However, little was known about it. We might dissociate "cognitive control" system from conflict processing by taking advantage of the variable of the FDI cognitive style. In addition, essentially cognitive styles (FDI) are often widely studied in psychological and educational fields, but hardly in neuroscience. We speculated that ERP components could help to explain the difference between how FD and FI individuals process information. The purpose of the reported study was to explore the possible relation between the "cognitive control" system and the conflict processing system during stimulus-matching task. We first characterized the standard FD/FI of senior-high-school Han students in grade two in Beijing, China, based on 160 students with similar age, education, living and cultural background. Twenty-six adolescents were selected and divided into two groups (extreme FD group and extreme FI group) according to their Group Embedded Figures Test (GEFT) results (FD: 5-8; FI: 17-19). They were tested on both Wechsler Adult Intelligence Scale (WAIS) and stimulus-matching task. ERP was measured while the subjects performed the stimulus-matching tasks by categorizing two figures that were presented sequentially either as a match (same shape) or as a conflict (different shape) conditions. The results showed that the mean amplitude of N270 in FI group was higher relative to that in FD group at nearly all centrofrontal areas in the conflict condition. We conclude that the FDI cognitive styles could influence the conflict processing

  15. Improved Airborne Gravity Results Using New Relative Gravity Sensor Technology

    Science.gov (United States)

    Brady, N.

    2013-12-01

    Airborne gravity data has contributed greatly to our knowledge of subsurface geophysics particularly in rugged and otherwise inaccessible areas such as Antarctica. Reliable high quality GPS data has renewed interest in improving the accuracy of airborne gravity systems and recent improvements in the electronic control of the sensor have increased the accuracy and ability of the classic Lacoste and Romberg zero length spring gravity meters to operate in turbulent air conditions. Lacoste and Romberg type gravity meters provide increased sensitivity over other relative gravity meters by utilizing a mass attached to a horizontal beam which is balanced by a ';zero length spring'. This type of dynamic gravity sensor is capable of measuring gravity changes on the order of 0.05 milliGals in laboratory conditions but more commonly 0.7 to 1 milliGal in survey use. The sensor may have errors induced by the electronics used to read the beam position as well as noise induced by unwanted accelerations, commonly turbulence, which moves the beam away from its ideal balance position otherwise known as the reading line. The sensor relies on a measuring screw controlled by a computer which attempts to bring the beam back to the reading line position. The beam is also heavily damped so that it does not react to most unwanted high frequency accelerations. However this heavily damped system is slow to react, particularly in turns where there are very high Eotvos effects. New sensor technology utilizes magnetic damping of the beam coupled with an active feedback system which acts to effectively keep the beam locked at the reading line position. The feedback system operates over the entire range of the system so there is now no requirement for a measuring screw. The feedback system operates at very high speed so that even large turbulent events have minimal impact on data quality and very little, if any, survey line data is lost because of large beam displacement errors. Airborne testing

  16. Evaluating a national science and technology program using the human capital and relational asset perspectives.

    Science.gov (United States)

    Hung, Chia-Liang; Chou, Jerome Chih-Lung; Roan, Hung-Wei

    2010-11-01

    The purpose of this research is to evaluate the performance of the National Science and Technology Program (NSTP) by targeting the Taiwan National Telecommunication Program (NTP) initiated in 1998. The Taiwan telecommunications industry has prospered, currently occupying key positions in global markets even though NTP seldom contributes positively to patent citation performance. Hence, the authors of this study investigate the qualitative perspective of intellectual capital rather than quantitative technological indices. The current study focuses on both human capital and relational assets through surveys of 53 principal investigators of NTP projects and 63 industrial R&D managers of telecommunications corporations in the Taiwan market. Results show that NSTP member quality and the flow of employment are good indicators of human capital and that both perform better than the middle value in the case of Taiwan NTP. In addition, we find that industrial participants are more likely to share R&D resources than other academic researchers with higher intention of co-publishing, co-funding, and sharing equipment and facilities. The industrial NTP participants also have higher expectations regarding achieving advanced technology breakthroughs in contrast to non-NTP industrial interviewees. Moreover, industrial participants with greater industry-university cooperation intensity indeed obtain a particular advantage, that is, greater knowledge acquisition from other fields related to the effect of knowledge spillovers through the particular NSTP linkage. Accordingly, from the perspectives of human capital and relational assets, the authors conclude by articulating the importance of absorptive capacity resulting from good human capital and knowledge spillover contributed by relational assets within governmental technology policy and NSTP programming. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  17. Electrodynamics the field-free approach : electrostatics, magnetism, induction, relativity and field theory

    CERN Document Server

    Prytz, Kjell

    2015-01-01

    This book is intended as an undergraduate textbook in electrodynamics at basic or advanced level. The objective is to attain a general understanding of the electrodynamic theory and its basic experiments and phenomena in order to form a foundation for further studies in the engineering sciences as well as in modern quantum physics. The outline of the book is obtained from the following principles: •         Base the theory on the concept of force and mutual interaction •         Connect the theory to experiments and observations accessible to the student •         Treat the electric, magnetic and inductive phenomena cohesively with respect to force, energy, dipoles and material •         Present electrodynamics using the same principles as in the preceding mechanics course •         Aim at explaining that theory of relativity is based on the magnetic effect •         Introduce field theory after the basic phenomena have been explored in terms of forc...

  18. Some relations of parameters in quantum field theory

    International Nuclear Information System (INIS)

    Ishikawa, K.

    1986-01-01

    Two schemes of parameter relations, linear relation and non-linear relation are discussed. The linear relation of coupling constants is derived directly from an underlying symmetry of the classical theory and is preserved usually in the quantum theory. The non-linear relation is not derived by a same manner but is derived by more involved way which is intrinsically connected with quantum theory. An underlying symmetry which leads the linear relation is shown to be essential in the non-linear relation too. Some extension is also discussed

  19. EPA-developed, patented technologies related to water monitoring and remediation that are available for licensing

    Science.gov (United States)

    Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace. These technologies relate to water monitoring and treatment technologies.

  20. Cultural repertoires and food-related household technology within colonia households under conditions of material hardship

    Directory of Open Access Journals (Sweden)

    Dean Wesley R

    2012-05-01

    Full Text Available Abstract Introduction Mexican-origin women in the U.S. living in colonias (new-destination Mexican-immigrant communities along the Texas-Mexico border suffer from a high incidence of food insecurity and diet-related chronic disease. Understanding environmental factors that influence food-related behaviors among this population will be important to improving the well-being of colonia households. This article focuses on cultural repertoires that enable food choice and the everyday uses of technology in food-related practice by Mexican-immigrant women in colonia households under conditions of material hardship. Findings are presented within a conceptual framework informed by concepts drawn from sociological accounts of technology, food choice, culture, and material hardship. Methods Field notes were provided by teams of promotora-researchers (indigenous community health workers and public-health professionals trained as participant observers. They conducted observations on three separate occasions (two half-days during the week and one weekend day within eight family residences located in colonias near the towns of Alton and San Carlos, Texas. English observations were coded inductively and early observations stressed the importance of technology and material hardship in food-related behavior. These observations were further explored and coded using the qualitative data package Atlas.ti. Results Technology included kitchen implements used in standard and adapted configurations and household infrastructure. Residents employed tools across a range of food-related activities identified as forms of food acquisition, storage, preparation, serving, feeding and eating, cleaning, and waste processing. Material hardships included the quality, quantity, acceptability, and uncertainty dimensions of food insecurity, and insufficient consumption of housing, clothing and medical care. Cultural repertoires for coping with material hardship included reliance on

  1. Cultural repertoires and food-related household technology within colonia households under conditions of material hardship.

    Science.gov (United States)

    Dean, Wesley R; Sharkey, Joseph R; Johnson, Cassandra M; St John, Julie

    2012-05-15

    BSTRACT: Mexican-origin women in the U.S. living in colonias (new-destination Mexican-immigrant communities) along the Texas-Mexico border suffer from a high incidence of food insecurity and diet-related chronic disease. Understanding environmental factors that influence food-related behaviors among this population will be important to improving the well-being of colonia households. This article focuses on cultural repertoires that enable food choice and the everyday uses of technology in food-related practice by Mexican-immigrant women in colonia households under conditions of material hardship. Findings are presented within a conceptual framework informed by concepts drawn from sociological accounts of technology, food choice, culture, and material hardship. Field notes were provided by teams of promotora-researchers (indigenous community health workers) and public-health professionals trained as participant observers. They conducted observations on three separate occasions (two half-days during the week and one weekend day) within eight family residences located in colonias near the towns of Alton and San Carlos, Texas. English observations were coded inductively and early observations stressed the importance of technology and material hardship in food-related behavior. These observations were further explored and coded using the qualitative data package Atlas.ti. Technology included kitchen implements used in standard and adapted configurations and household infrastructure. Residents employed tools across a range of food-related activities identified as forms of food acquisition, storage, preparation, serving, feeding and eating, cleaning, and waste processing. Material hardships included the quality, quantity, acceptability, and uncertainty dimensions of food insecurity, and insufficient consumption of housing, clothing and medical care. Cultural repertoires for coping with material hardship included reliance on inexpensive staple foods and dishes, and

  2. Study on technology of high-frequency pulsed magnetic field strength measurement.

    Science.gov (United States)

    Chen, Yi-Mei; Liu, Zhi-Peng; Yin, Tao

    2012-01-01

    High-frequency transient weak magnetic field is always involved in researches about biomedical engineering field while common magnetic-field sensors cannot work properly at frequencies as high as MHz. To measure the value of MHz-level weak pulsed magnetic-field strength accurately, this paper designs a measurement and calibration method for pulsed magnetic-field. In this paper, a device made of Nonferromagnetic material was independently designed and applied to pulsed magnetic field measurement. It held an accurately relative position between the magnetic field generating coil and the detecting coil. By applying a sinusoidal pulse to the generator, collecting the induced electromotive force of the detector, the final magnetic field strength was worked out through algorithms written in Matlab according to Faraday's Law. Experiments were carried out for measurement and calibration. Experiments showed that, under good stability and consistency, accurate measurement of magnetic-field strength of a sinepulse magnetic-field can be achieved, with frequency at 0.5, 1, 1.5 MHz and strength level at micro-Tesla. Calibration results carried out a measuring relative error about 2.5%.

  3. Field Evaluation of Whole Airliner Decontamination Technologies for Narrow-Body Aircraft

    National Research Council Canada - National Science Library

    Gale, William F; Gale, Hyacinth S; Watson, Jean

    2008-01-01

    .... The field evaluation, performed on a McDonnell Douglas DC-9 aircraft, determined that the stand-alone thermal decontamination system exhibited reasonable temperature and relative humidity control capabilities...

  4. Application verification research of cloud computing technology in the field of real time aerospace experiment

    Science.gov (United States)

    Wan, Junwei; Chen, Hongyan; Zhao, Jing

    2017-08-01

    According to the requirements of real-time, reliability and safety for aerospace experiment, the single center cloud computing technology application verification platform is constructed. At the IAAS level, the feasibility of the cloud computing technology be applied to the field of aerospace experiment is tested and verified. Based on the analysis of the test results, a preliminary conclusion is obtained: Cloud computing platform can be applied to the aerospace experiment computing intensive business. For I/O intensive business, it is recommended to use the traditional physical machine.

  5. Guidance for Deployment of Mobile Technologies for Nuclear Power Plant Field Workers

    Energy Technology Data Exchange (ETDEWEB)

    Heather D. Medema; Ronald K. Farris

    2012-09-01

    This report is a guidance document prepared for the benefit of commercial nuclear power plants’ (NPPs) supporting organizations and personnel who are considering or undertaking deployment of mobile technology for the purpose of improving human performance and plant status control (PSC) for field workers in an NPP setting. This document especially is directed at NPP business managers, Electric Power Research Institute, Institute of Nuclear Power Operations, and other non-Information Technology personnel. This information is not intended to replace basic project management practices or reiterate these processes, but is to support decision-making, planning, and preparation of a business case.

  6. Concise encyclopedia of semiconducting materials and related technologies

    CERN Document Server

    Mahajan, S M

    1992-01-01

    The development of electronic materials and particularly advances in semiconductor technology have played a central role in the electronics revolution by allowing the production of increasingly cheap and powerful computing equipment and advanced telecommunications devices. This Concise Encyclopedia, which incorporates relevant articles from the acclaimed Encyclopedia of Materials Science and Engineering as well as newly commissioned articles, emphasizes the materials aspects of semiconductors and the technologies important in solid-state electronics. Growth of bulk crystals and epitaxial layer

  7. Technology-Related Strategies Used by Educational Leaders to Increase Prosocial Behavior in K-12 Schools

    Science.gov (United States)

    Beers, Jason Ronald

    2017-01-01

    Purpose. The purpose of this study was to identify technology-related strategies used by educational leaders to increase prosocial behavior in K-12 schools. Information and communication technology (ICT) is developing at a rapid rate and is becoming more ubiquitous among students. Discovering and understanding common technology-related strategies…

  8. Current issues in libraries, information science and related fields

    CERN Document Server

    Woodsworth, Anne

    2015-01-01

    This volume is unusual in that the theme is quite broad in scope yet focused on a specific topic; innovations and boundary-pushing studies in areas not usually found in library literature. It examines the periphery of the field surveyed in previous volumes. The chapters are grouped in two categories: professional issues and transforming services.

  9. The Abakaliki Volcaniclastic Rocks: Field relations from resistivity ...

    African Journals Online (AJOL)

    The Abakaliki pyroclastics are the best known volcaniclastic rocks in Nigeria. Resistivity profiling across Echara Unuhu and Amike Aba pyroclastic bodies and geological field descriptions of the rock reveal a relationship between apparent resistivity and the different lithotypes within the pyroclastic mass. Apparent resistivity ...

  10. Schr"odinger's Unified Field Theory: Physics by Public Relations

    Science.gov (United States)

    Halpern, Paul

    2009-05-01

    We will explore the circumstances surrounding Erwin Schr"odinger's announcement in January 1947 that he had developed a comprehensive unified field theory of gravitation and electromagnetism. We will speculate on Schr"odinger's motivations for the mode and tone of his statements, consider the reaction of the international press within the context of the postwar era, and examine Einstein's response.

  11. Decision Analysis Science Modeling for Application and Fielding Selection Applied to Metal Decontamination Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lagos, L.E.; Ebadian, M.A.

    1998-01-01

    During the decontamination and decommissioning (D and D) activities being conducted by the U.S. Department of Energy (DOE), approximately 550,000 metric tons of contaminated metal will be generated by the disposition of contaminated buildings. The majority of the structural steel is considered to be radiologically contaminated. The D and D activities require the treatment of the structural steel to reduce occupational and environmental radiological exposures during dismantlement. Treatment technologies may also be required for possible recycling. Many proven commercial treatment technologies are available. These treatment processes vary in aggressiveness, safety requirements, secondary waste generation, necessary capital, and operation and maintenance costs. Choosing the appropriate technology to meet the decontamination objectives for structural steel is a difficult process. A single information source comparing innovative and nuclear and non-nuclear technologies in the areas of safety, cost and effectiveness is not currently commercially available to perform a detailed analysis. This study presents comparable data related to operation and maintenance, cost, and health and safely aspects of three readily available technologies and one innovative technology for nuclear decontamination. The technologies include Advance Recyclable Media System (ARMS{trademark}), NELCO Porta Shot Blast{trademark} (JHJ-2000), Pegasus Coating Removal System 7 (PCRS-7) and the innovative laser ablation technology called the Yag Eraser{trademark}.

  12. Comparing Natural Gas Leakage Detection Technologies Using an Open-Source "Virtual Gas Field" Simulator.

    Science.gov (United States)

    Kemp, Chandler E; Ravikumar, Arvind P; Brandt, Adam R

    2016-04-19

    We present a tool for modeling the performance of methane leak detection and repair programs that can be used to evaluate the effectiveness of detection technologies and proposed mitigation policies. The tool uses a two-state Markov model to simulate the evolution of methane leakage from an artificial natural gas field. Leaks are created stochastically, drawing from the current understanding of the frequency and size distributions at production facilities. Various leak detection and repair programs can be simulated to determine the rate at which each would identify and repair leaks. Integrating the methane leakage over time enables a meaningful comparison between technologies, using both economic and environmental metrics. We simulate four existing or proposed detection technologies: flame ionization detection, manual infrared camera, automated infrared drone, and distributed detectors. Comparing these four technologies, we found that over 80% of simulated leakage could be mitigated with a positive net present value, although the maximum benefit is realized by selectively targeting larger leaks. Our results show that low-cost leak detection programs can rely on high-cost technology, as long as it is applied in a way that allows for rapid detection of large leaks. Any strategy to reduce leakage should require a careful consideration of the differences between low-cost technologies and low-cost programs.

  13. Geothermal technology publications and related reports: A bibliography, January 1986 through December 1987

    Energy Technology Data Exchange (ETDEWEB)

    Tolendino, C.D. (ed.)

    1988-08-01

    Sandia publications resulting from DOE programs in Geothermal Technologies, Magma Energy and Continental Scientific Drilling are listed for reference. The RandD includes borehole-related technologies, in situ processes, and wellbore diagnostics.

  14. Picosecond UV single photon detectors with lateral drift field: Concept and technologies

    Energy Technology Data Exchange (ETDEWEB)

    Yakimov, M.; Oktyabrsky, S.; Murat, P.

    2015-09-01

    Group III–V semiconductor materials are being considered as a Si replacement for advanced logic devices for quite some time. Advances in III–V processing technologies, such as interface and surface passivation, large area deep submicron lithography with high-aspect ratio etching primarily driven by the metal-oxide-semiconductor field-effect transistor development can also be used for other applications. In this paper we will focus on photodetectors with the drift field parallel to the surface. We compare the proposed concept to the state-of-the-art Si-based technology and discuss requirements which need to be satisfied for such detectors to be used in a single photon counting mode in blue and ultraviolet spectral region with about 10 ps photon timing resolution essential for numerous applications ranging from high-energy physics to medical imaging.

  15. Electromagnetic Field Analysis and Modeling of a Relative Position Detection Sensor for High Speed Maglev Trains

    Directory of Open Access Journals (Sweden)

    Song Xue

    2012-05-01

    Full Text Available The long stator track for high speed maglev trains has a tooth-slot structure. The sensor obtains precise relative position information for the traction system by detecting the long stator tooth-slot structure based on nondestructive detection technology. The magnetic field modeling of the sensor is a typical three-dimensional (3-D electromagnetic problem with complex boundary conditions, and is studied semi-analytically in this paper. A second-order vector potential (SOVP is introduced to simplify the vector field problem to a scalar field one, the solution of which can be expressed in terms of series expansions according to Multipole Theory (MT and the New Equivalent Source (NES method. The coefficients of the expansions are determined by the least squares method based on the boundary conditions. Then, the solution is compared to the simulation result through Finite Element Analysis (FEA. The comparison results show that the semi-analytical solution agrees approximately with the numerical solution. Finally, based on electromagnetic modeling, a difference coil structure is designed to improve the sensitivity and accuracy of the sensor.

  16. Electromagnetic Field Analysis and Modeling of a Relative Position Detection Sensor for High Speed Maglev Trains

    Science.gov (United States)

    Xue, Song; He, Ning; Long, Zhiqiang

    2012-01-01

    The long stator track for high speed maglev trains has a tooth-slot structure. The sensor obtains precise relative position information for the traction system by detecting the long stator tooth-slot structure based on nondestructive detection technology. The magnetic field modeling of the sensor is a typical three-dimensional (3-D) electromagnetic problem with complex boundary conditions, and is studied semi-analytically in this paper. A second-order vector potential (SOVP) is introduced to simplify the vector field problem to a scalar field one, the solution of which can be expressed in terms of series expansions according to Multipole Theory (MT) and the New Equivalent Source (NES) method. The coefficients of the expansions are determined by the least squares method based on the boundary conditions. Then, the solution is compared to the simulation result through Finite Element Analysis (FEA). The comparison results show that the semi-analytical solution agrees approximately with the numerical solution. Finally, based on electromagnetic modeling, a difference coil structure is designed to improve the sensitivity and accuracy of the sensor. PMID:22778652

  17. Sharing of fusion related technology among third world countries

    International Nuclear Information System (INIS)

    Lee, S.

    1987-01-01

    A program to initiate experimental plasma physics in developing countries has been started as a definite step for technology sharing. Cost effectiveness of several devices has been carefully considered from the viewpoint of physical mechanisms and existing technology. From this consideration emerges the plasma focus which whilst requiring no extraordinary technology yet could be packaged into a comprehensive facility for training in plasma production, plasma dynamics, plasma diagnostic and measurement of plasma x-rays, REB and fusion neutrons, with a very wide scope for the establishment of indigeneous training and research. It is shown that the simplicity of the approach is no barrier to the richness of plasma phenomena. Indeed the simplicity allows a clear comparison of pinch devices and, for example, enables two crucial limitations of existing plasma focus devices to be singled out, the overcoming of which could result in a many-fold jump in neutron yield. Hence the need for basic studies of these limitations. These and other studies could just as well be made on small devices. The UNU Training Programme resulted from the above consideration and evolved around the UNU/ICTP PFF, a small plasma focus with interesting physics and cost-effective technology. The extension of future training programmes to cover other important devices, for example, of the FRC type such as the Rotamak could widen the scope of this sharing of plasma and fusion technology. (author) [pt

  18. Gravitational field of compact objects in general relativity

    Science.gov (United States)

    Boshkayev, Kuantay; Quevedo, Hernando; Ruffini, Remo

    2012-09-01

    We study some exact and approximate solutions of Einstein’s equations that can be used to describe the gravitational field of astrophysical compact objects in the limiting case of slow rotation and slight deformation. First, we show that none of the standard models obtained by using Fock’s method can be used as an interior source for the approximate exterior Kerr solution. We then use Fock’s method to derive a generalized interior solution, and also an exterior solution that turns out to be equivalent to the exterior Hartle-Thorne approximate solution that, in turn, is equivalent to an approximate limiting case of the exact Quevedo-Mashhoon solution. As a result we obtain an analytic approximate solution that describes the interior and exterior gravitational field of a slowly rotating and slightly deformed astrophysical object.

  19. Impacts of electromagnetic fields associated with marine and hydrokinetic surrogate technologies on fish movements and behaviors.

    Energy Technology Data Exchange (ETDEWEB)

    Claisse, Jeremy T. [Vantuna Research Group, Los Angeles, CA (United States); Pondella, Daniel J. [Vantuna Research Group, Los Angeles, CA (United States); Williams, Chelsea M. [Vantuna Research Group, Los Angeles, CA (United States); Zahn, Laurel A. [Vantuna Research Group, Los Angeles, CA (United States); Williams, Jonathan P. [Vantuna Research Group, Los Angeles, CA (United States)

    2015-09-30

    Marine and hydrokinetic energy (MHK) and offshore wind devices are being developed and deployed in U.S. and international waters. Electric current flowing through subsea transmission cables associated with these devices will generate electromagnetic fields (EMF), which may interact with, and potentially impact, marine fishes. Some marine fishes can detect electric and/or magnetic fields and use them to navigate, orientate, and sense prey, mates and predators. Over the past five years there have been multiple comprehensive reviews and studies evaluating the potential vulnerability of marine fishes to EMF produced by MHK devices. Most documented effects involve sub-lethal behavioral responses of individual fish when in close proximity to EMF (e.g., fish being repelled by or attracted to fields). These reviews reach conclusions that the current state of research on this topic is still in its infancy and evaluations of potential impacts are associated with great uncertainty. A variety of MHK technologies are likely to be considered for deployment offshore of the Hawaiian Islands, and there is a need to be able to better predict and assess potential associated environmental impacts. The goal of this study was to provide a complementary piece to these previous reviews (e.g., Normandeau et al. 2011) by focusing on marine fish species in the Hawaii region. We compiled the relevant available information, then prioritized fish species as candidates for various paths of future research. To address this, we first developed a list of Hawaii Region Focal Species, which included fishes that are more likely to be sensitive to EMF. We then compiled species-specific information available in the literature on their sensitivity to EMF, as well as life history, movement and habitat use information that could inform an analysis of their likelihood of encountering EMF from subsea cables associated with MHK devices. Studies have only documented EMF sensitivity in 11 of the marine fish

  20. The Temperature - Magnetic Field Relation in Observed and Simulated Sunspots

    Czech Academy of Sciences Publication Activity Database

    Sobotka, Michal; Rezaei, R.

    2017-01-01

    Roč. 292, č. 12 (2017), 188/1-188/12 ISSN 0038-0938 R&D Projects: GA ČR(CZ) GA14-04338S; GA MŠk(CZ) 7E13003 EU Projects: European Commission(XE) 312495 - SOLARNET Institutional support: RVO:67985815 Keywords : sunspots * magnetic fields * comparison Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics OBOR OECD: Astronomy (including astrophysics,space science) Impact factor: 2.682, year: 2016

  1. THE AUDIT OF THE QUALITY CONTROL SYSTEM WITHIN THE INFORMATION TECHNOLOGY FIELD

    Directory of Open Access Journals (Sweden)

    Robert Gabriel Dragomir

    2017-06-01

    Full Text Available The present paper speaks about the audit of the quality control system. First we exposed the general framework; the importance of information technology field under the actual development and challenges of the informatics systems. Then, we presented the national and international laws which regulate the audit of the informatics systems. Thirdly, we exposed the methodology of the audit for the quality system control in IT domain, describing its stages and flux diagram. In the end we jumped at the conclusions.

  2. Examining Volcanic Terrains Using In Situ Geochemical Technologies; Implications for Planetary Field Geology

    Science.gov (United States)

    Young, K. E.; Bleacher, J. E.; Evans, C. A.; Rogers, A. D.; Ito, G.; Arzoumanian, Z.; Gendreau, K.

    2015-01-01

    Regardless of the target destination for the next manned planetary mission, the crew will require technology with which to select samples for return to Earth. The six Apollo lunar surface missions crews had only the tools to enable them to physically pick samples up off the surface or from a boulder and store those samples for return to the Lunar Module and eventually to Earth. Sample characterization was dependent upon visual inspection and relied upon their extensive geology training. In the four decades since Apollo however, great advances have been made in traditionally laboratory-based instrument technologies that enable miniaturization to a field-portable configuration. The implications of these advancements extend past traditional terrestrial field geology and into planetary surface exploration. With tools that will allow for real-time geochemical analysis, an astronaut can better develop a series of working hypotheses that are testable during surface science operations. One such technology is x-ray fluorescence (XRF). Traditionally used in a laboratory configuration, these instruments have now been developed and marketed commercially in a field-portable mode. We examine this technology in the context of geologic sample analysis and discuss current and future plans for instrument deployment. We also discuss the development of the Chromatic Mineral Identification and Surface Texture (CMIST) instrument at the NASA Goddard Space Flight Center (GSFC). Testing is taking place in conjunction with the RIS4E (Remote, In Situ, and Synchrotron Studies for Science and Exploration) SSERVI (Solar System Exploration and Research Virtual Institute) team activities, including field testing at Kilauea Volcano, HI..

  3. International Conference on Fast Reactors and Related Fuel Cycles: Safe Technologies and Sustainable Scenarios (FR13). Presentations

    International Nuclear Information System (INIS)

    2013-01-01

    The conference, which was held from 4 to 7 of March 2013 in Paris, provided a forum to exchange information on national and international programmes, and more generally new developments and experience, in the field of fast reactors and related fuel cycle technologies. A first goal was to identify and discuss strategic and technical options that have been proposed by individual countries or companies. Another goal was to promote the development of fast reactors and related fuel cycle technologies in a safe, proliferation resistant and economic way. A third goal was to identify gaps and key issues that need to be addressed in relation to the industrial deployment of fast reactors with a closed fuel cycle. A fourth goal was to engage young scientists and engineers in this field, in particular with sustainability, innovation, simulation, safety, economics and public acceptance

  4. The Importance of Localized Related Variety for International Diversification of Corporate Technology

    DEFF Research Database (Denmark)

    Dettmann, Eva; Lacasa, Iciar Dominguez; Günther, Jutta

    2016-01-01

    technological activities. The estimations show that this is the case in regions characterized by a high overall technological strength. This suggests that related variety facilitates technological diversifications of foreign corporations in regions at the top of the geographic hierarchy......The importance of localized related variety for international diversification of corporate technology, Regional Studies. Internationalization of research and development has increased substantially in recent years. This paper analyses the determinants of spatial distribution of foreign...

  5. Field Assessment and Specification Review for Roller-Integrated Compaction Monitoring Technologies

    Directory of Open Access Journals (Sweden)

    David J. White

    2011-01-01

    Full Text Available Roller-integrated compaction monitoring (RICM technologies provide virtually 100-percent coverage of compacted areas with real-time display of the compaction measurement values. Although a few countries have developed quality control (QC and quality assurance (QA specifications, broader implementation of these technologies into earthwork construction operations still requires a thorough understanding of relationships between RICM values and traditional in situ point test measurements. The purpose of this paper is to provide: (a an overview of two technologies, namely, compaction meter value (CMV and machine drive power (MDP; (b a comprehensive review of field assessment studies, (c an overview of factors influencing statistical correlations, (d modeling for visualization and characterization of spatial nonuniformity; and (e a brief review of the current specifications.

  6. Public demonstration projects and field trials: Accelerating commercialisation of sustainable technology in solar photovoltaics

    International Nuclear Information System (INIS)

    Brown, James; Hendry, Chris

    2009-01-01

    The paper considers the role of government funded demonstration projects and field trials (DTs) in accelerating the commercialisation of new energy technologies that meet a public good but do not have immediate market appeal [Sagar, A.D., van der Zwaan, B., 2006. Technological innovation in the energy sector: R and D, deployment, and learning-by-doing. Energy Policy 34, 2601-2608]. Drawing on an original database of DTs in the EU, Japan and USA from 1973 to 2004, we review the history of DTs in photovoltaic technology for electricity generation, and its subsequent take up as a commercial energy source. We find that DTs that are aimed purely at discovering suitable market opportunities are less successful in achieving diffusion than projects that target a particular application and concentrate resources on it. The former nevertheless have a vital role to play in the learning process, while a targeted focus is often dependent on national industrial and institutional factors.

  7. Volvo drivers' experiences with advanced crash avoidance and related technologies.

    Science.gov (United States)

    Eichelberger, Angela H; McCartt, Anne T

    2014-01-01

    Crash avoidance technologies can potentially prevent or mitigate many crashes, but their success depends in part on driver acceptance. Owners of 2010-2012 model Volvo vehicles with several technologies were interviewed about their experiences. Interviews were conducted in summer 2012 with 155 owners of vehicles with City Safety as a standard feature; 145 owners with an optional technology package that included adaptive cruise control, distance alert, collision warning with full auto brake (and pedestrian detection on certain models), driver alert control, and lane departure warning; and 172 owners with both City Safety and the technology package. The survey response rates were 21 percent for owners with City Safety, 30 percent for owners with the technology package, and 27 percent for owners with both. Ten percent of owners opted out before the telephone survey began, and 18 percent declined to participate when called. Despite some annoyance, most respondents always leave the systems on, although fewer do so for lane departure warning (59%). For each of the systems, at least 80 percent of respondents with the system would want it on their next vehicle. Many respondents reported safer driving habits with the systems (e.g., following less closely with adaptive cruise control, using turn signals more often with lane departure warning). Fewer respondents reported potentially unsafe behavior, such as allowing the vehicle to brake for them at least some of the time. About one third of respondents experienced autonomous braking when they believed they were at risk of crashing, and about one fifth of respondents thought it had prevented a crash. About one fifth of respondents with the technology package reported that they were confused or misunderstood which safety system had activated in their vehicle. Consistent with the results for early adopters in the previous survey of Volvo and Infiniti owners, the present survey found that driver acceptance of the technologies

  8. Technology and Information Tool Preferences of Academics in the Field of Anaesthesiology.

    Science.gov (United States)

    Akkaya, Akcan; Bilgi, Murat; Demirhan, Abdullah; Kurt, Adem Deniz; Tekelioğlu, Ümit Yaşar; Akkaya, Kadir; Koçoğlu, Hasan; Tekçe, Hikmet

    2014-12-01

    Researchers use a large number of information technology tools from the beginning until the publication of a scientific study. The aim of the study is to investigate the technology and data processing tool usage preferences of academics who produce scientific publications in the field of anaesthesiology. A multiple-choice survey, including 18 questions regarding the use of technology to assess the preferences of academicians, was performed. PubMed has been the most preferred article search portal, and the second is Google Academic. Medscape has become the most preferred medical innovation tracking website. Only 12% of academicians obtain a clinical trial registration number for their randomized clinical research. In total, 28% of respondents used the Consolidated Standards of Reporting Trials checklist in their clinical trials. Of all participants, 21% was using Dropbox and 9% was using Google-Drive for sharing files. Google Chrome was the most preferred internet browser (32.25%) for academic purposes. English language editing service was obtained from the Scribendi (21%) and Textcheck (12%) websites. Half of the academics were getting help from their specialist with a personal relationship, 27% was doing it themselves, and 24% was obtaining professional assistance for statistical requirements. Sixty percent of the participants were not using a reference editing program, and 21% was using EndNote. Nine percent of the academics were spending money for article writing, and the mean cost was 1287 Turkish Liras/year. Academics in the field of anaesthesiology significantly benefit from technology and informatics tools to produce scientific publications.

  9. Comparison of curricula in radiation technology in the field of radiotherapy in selected European Union countries.

    Science.gov (United States)

    Janaszczyk, Agnieszka; Bogusz-Czerniewicz, Marta

    2011-01-01

    Radiation technology is a discipline of medical science which deals with diagnostics, imaging and radiotherapy, that is treatment by ionizing radiation. To present and compare the existing curricula of radiation technology in selected EU countries. The research work done for the purpose of the comparative analysis was based on the methods of diagnostic test and document analysis. The comparison of curricula in selected countries, namely Austria, France, the Netherlands and Poland, showed that admission criteria to radiation technology courses are varied and depend on regulations of respective Ministries of Health. The most restrictive conditions, including written tests in biology, chemistry and physics, and psychometric test, are those in France. Contents of basic and specialist subject groups are very similar in all the countries. The difference is in the number of ECT points assigned to particular subjects and the number of course hours offered. The longest practical training is provided in the Netherlands and the shortest one in Poland. The duration of studies in the Netherlands is 4 years, while in Poland it is 3 years. Austria is the only country to offer extra practical training in quality management. Graduates in the compared EU countries have similar level of qualifications in the fields of operation of radiological equipment, radiotherapy, nuclear medicine, foreign language and specialist terminology in the field of medical and physical sciences, general knowledge of medical and physical sciences, and detailed knowledge of radiation technology.

  10. Technology-Assisted Learning: A Longitudinal Field Study of Knowledge Category, Learning Effectiveness and Satisfaction in Language Learning

    Science.gov (United States)

    Hui, W.; Hu, P. J.-H.; Clark, T. H. K.; Tam, K. Y.; Milton, J.

    2008-01-01

    A field experiment compares the effectiveness and satisfaction associated with technology-assisted learning with that of face-to-face learning. The empirical evidence suggests that technology-assisted learning effectiveness depends on the target knowledge category. Building on Kolb's experiential learning model, we show that technology-assisted…

  11. 1st World Congress on Electroporation and Pulsed Electric Fields in Biology, Medicine and Food & Environmental Technologies

    CERN Document Server

    Kramar, Peter

    2016-01-01

    This volume presents the proceedings of the 1st World Congress on Electroporation and Pulsed Electric Fields in Biology, Medicine and Food & Environmental Technologies (WC2015). The congress took place in Portorož, Slovenia, during the week of September 6th to 10th, 2015. The scientific part of the Congress covered different aspects of electroporation and related technologies and included the following main topics:   ·         Application of pulsed electric fields technology in food: challenges and opportunities ·         Electrical impedance measurement for assessment of electroporation yield ·         Electrochemistry and electroporation ·         Electroporation meets electrostimulation ·         Electrotechnologies for food and biomass treatment ·         Food and biotechnology applications ·         In vitro electroporation - basic mechanisms ·         Interfacial behaviour of lipid-assemblies, membranes and cells in electric f...

  12. Nuclear fusion and fission, and related technologies department: 2007 progress report

    International Nuclear Information System (INIS)

    2007-12-01

    ENEA continues to contribute to broadening plasma physics knowledge as well as to developing the relevant technologies in the framework of the EURATOM-ENEA Association for fusion. This report describes the 2007 research activities carried out by the ENEA Fusion Research Group of the Nuclear Fusion and Fission, and Related Technologies Department (FPN). Other ENEA research groups also contributed to the activities. The following fields were addressed: magnetically confined nuclear fusion (physics and technology), superconductivity and inertial fusion. Planning of the 2007 fusion activities took into account the different scenarios determined by the new organisation of the European programme based on the start of ITER construction. The establishment of the ITER International Organisation and the European Domestic Agency (Fusion for Energy) required a new organisational scheme. This has implied not only the implementation of a more project oriented structure but also the need to launch the constitution of a consortium agreement between the Associations in order to cope with the needs for the design and construction of the components of ITER that require specific know-how, e.g., diagnostics and test blanket module

  13. Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies, Class III

    Energy Technology Data Exchange (ETDEWEB)

    City of Long Beach; Tidelands Oil Production Company; University of Southern California; David K. Davies and Associates

    2002-09-30

    The objective of this project was to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. It was hoped that the successful application of these technologies would result in their implementation throughout the Wilmington Field and, through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs.

  14. Effects on DPPH inhibition of egg-white protein polypeptides treated by pulsed electric field technology.

    Science.gov (United States)

    Wang, Ke; Wang, Jia; Liu, Bolong; Lin, Songyi; Zhao, Ping; Liu, Jingbo; Jones, Gregory; Huang, Hsiang-Chi

    2013-05-01

    Egg-white protein polypeptides are potentially used as a functional ingredient in food products. In this study, the effects on DPPH inhibition of egg-white protein polypeptides ranging from 10 to 30 kDa treated by pulsed electric field (PEF) technology were investigated. 2, 2-Diphenyl-1-picrylhydrazyl (DPPH) inhibition (%) was used to evaluate the antioxidant activity of polypeptides. In order to develop and optimize a pulsed electric field (PEF) mathematical model for improving the antioxidant activity, we have investigated three variables, including concentration (6, 8 and 10 mg mL(-1)), electric field intensity (10, 20 and 30 kV cm(-1)) and pulse frequency (2000, 2350 and 2700 Hz) and subsequently optimized them by response surface methodology (RSM). The concentration (8 mg mL(-1)), electric field intensity (10 kV cm(-1)) and pulse frequency (2000 Hz) were found to be the optimal conditions under which the DPPH inhibition increased 28.44%, compared to the sample without PEF treatment. Both near-infrared spectroscopy (NIR) and mid-infrared spectroscopy (MIR) were used to analyze the change of functional groups. The results showed that PEF technology could improve the antioxidant activity of antioxidant polypeptides from egg-white protein under the optimized conditions. © 2012 Society of Chemical Industry.

  15. Solving challenges in inter- and trans-disciplinary working teams: Lessons from the surgical technology field.

    Science.gov (United States)

    Korb, Werner; Geißler, Norman; Strauß, Gero

    2015-03-01

    Engineering a medical technology is a complex process, therefore it is important to include experts from different scientific fields. This is particularly true for the development of surgical technology, where the relevant scientific fields are surgery (medicine) and engineering (electrical engineering, mechanical engineering, computer science, etc.). Furthermore, the scientific field of human factors is important to ensure that a surgical technology is indeed functional, process-oriented, effective, efficient as well as user- and patient-oriented. Working in such trans- and inter-disciplinary teams can be challenging due to different working cultures. The intention of this paper is to propose an innovative cooperative working culture for the interdisciplinary field of computer-assisted surgery (CAS) based on more than ten years of research on the one hand and the interdisciplinary literature on working cultures and various organizational theories on the other hand. In this paper, a retrospective analysis of more than ten years of research work in inter- and trans-disciplinary teams in the field of CAS will be performed. This analysis is based on the documented observations of the authors, the study reports, protocols, lab reports and published publications. To additionally evaluate the scientific experience in an interdisciplinary research team, a literature analysis regarding scientific literature on trans- and inter-disciplinarity was performed. Own research and literature analyses were compared. Both the literature and the scientific experience in an interdisciplinary research team show that consensus finding is not always easy. It is, however, important to start trans- and interdisciplinary projects with a shared mental model and common goals, which include communication and leadership issues within the project teams, i.e. clear and unambiguous information about the individual responsibilities and objectives to attain. This is made necessary due to differing

  16. Effects on functional groups and zeta potential of SAP1pulsed electric field technology.

    Science.gov (United States)

    Liang, Rong; Li, Xuenan; Lin, Songyi; Wang, Jia

    2017-01-01

    SAP 1 pulsed electric field (PEF) technology. The effects of electric field intensity and pulse frequency on SAP 1 electric field intensity 15 kV cm -1 , pulse frequency 1600 Hz and flow velocity 2.93 mL min -1 ). Furthermore, the PEF-treated SAP 1 < MW < 3kDa under optimal conditions lacked the characteristic absorbance of N-H, C = C and the amide band and the zeta potential was reduced to -18.0 mV. Overall, the results of the present study suggest that the improvement of antioxidant activity of SAP 1 < MW < 3kDa is a result of the contribution of the functional groups and the change in zeta potential when treated with PEF. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  17. Test of piezo-ceramic motor technology in ITER relevant high magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Monti, Chiara, E-mail: chiara.monti@enea.it [Associazione EURATOM-ENEA sulla Fusione, via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Besi Vetrella, Ugo; Mugnaini, Giampiero; Neri, Carlo; Rossi, Paolo; Viola, Rosario [Associazione EURATOM-ENEA sulla Fusione, via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Dubus, Gregory; Damiani, Carlo [Fusion for Energy, c/ Josep Pla, 2 Torres Diagonal Litoral, 08019 Barcelona (Spain)

    2014-10-15

    In the framework of a Fusion for Energy (F4E) grant, a test campaign started in 2012 in order to assess the performance of the in-vessel viewing system (IVVS) probe concept and to verify its compatibility when exposed to ITER typical working conditions. ENEA laboratories went through with several tests simulating high magnetic fields, high temperature, high vacuum, gamma radiation and neutron radiation. A customized motor has been adopted to study the performances of ultrasonic piezo motors technology in high magnetic field conditions. This paper reports on the testing activity performed on the motor in a multi Tesla magnetic field. The job was carried out in a test facility of ENEA laboratories able to achieve 14 T. A maximum field of 10 T, fully compliant with ITER requirements (8 T), was applied. A specific mechanical assembly has been designed and manufactured to hold the motor in the region with high homogeneity of the field. Results obtained so far indicate that the motor is compatible with high magnetic fields, and are presented in the paper.

  18. Monitoring abandoned dreg fields of high-speed railway construction with UAV remote sensing technology

    Science.gov (United States)

    Lin, Jiayuan; Wang, Zhiliang; Wang, Yangchun; Lin, Yi; Du, Xiaolin

    2015-12-01

    High-speed railway construction will produce a large amount of abandoned dregs, so it is necessary to build enough dreg deposition fields along the railway. The task of the department of soil and water conservation is to monitor the construction and usage of abandoned dreg fields according to the design in the whole process of railway construction. As long linear construction projects, many high-speed railways go through regions of complex terrain, which poses great difficulties to monitoring current status of abandoned dreg fields. With the advantages of low cost, flexible launch and landing, safety, under-cloud-flying, hyperspatial image resolution, Unmanned Aerial Vehicles (UAVs) are very suitable for obtaining remote sensing imagery along the railway. One segment of the high-speed railway from Chongqing to Wanzhou and its neighborhood was chosen as the study area to demonstrate key technologies and specific procedures of monitoring abandoned dreg fields using the UAV system. The UAV system and its components are introduced along with the flight trajectories, acquired UAV imagery, and attitude data. Image preprocessing and generation of DEM and DOM are described in detail followed by image-based measurement accuracy assessment and abandoned dreg field status investigation on the resulting DOM and DEM. Results prove the feasibility and effectiveness of applying the fixed wing UAV system to rapidly monitoring the construction and usage of abandoned dreg fields

  19. GOLD CLUSTER LABELS AND RELATED TECHNOLOGIES IN MOLECULAR MORPHOLOGY.

    Energy Technology Data Exchange (ETDEWEB)

    HAINFELD,J.F.; POWELL,R.D.

    2004-02-04

    stabilization, and the total size of the label is therefore significantly smaller. Since the clusters considered in this chapter are generally less than 3 nm in diameter, this allows the preparation of probes that are much smaller than conventional immunocolloids, and cluster labeling can take advantage of the higher resolution and penetration available with smaller conjugates. Most importantly, while colloidal gold is adsorbed to its conjugate probe, clusters are conjugated by chemically specific covalent cross-linking. Therefore, the range of possible conjugate targeting agents includes any probe containing an appropriate reactive group. Clusters conjugates have been prepared with a wide variety of molecules that do not form colloidal gold conjugates, including lipids, oligonucleotides, peptides, and other small molecules. In addition to the development of gold cluster labeling technology, this chapter will also review new developments in the related metallographic, or metal deposition, methods. This includes gold enhancement, in which gold rather than silver is selectively deposited onto gold particles. We will also describe some results obtained using another novel metallographic procedure, enzyme metallography, in which metal is directly deposited from solution by an enzymatic reaction. Because the original, and most widespread, use of metal cluster labels is in electron microscopy, many of the light microscopy methods described were developed as extensions of, or complements to electron microscopy methods, and demonstrate their greatest advantages when used with electron microscopy; therefore reference will also be made to the electron microscope methods used in the same studies, and the unique information that may be obtained from the correlation of both methods.

  20. Field Test and Evaluation of Engineered Biomineralization Technology for Sealing Existing Wells

    Energy Technology Data Exchange (ETDEWEB)

    Cunningham, Alfred [Montana State Univ., Bozeman, MT (United States)

    2015-12-21

    This research project addresses one of the goals of the U.S. Department of Energy (DOE) Carbon Storage Program (CSP) aimed at developing Advanced Wellbore Integrity Technologies to Ensure Permanent Geologic Carbon Storage. The technology field-tested in this research project is referred to as microbially induced calcite precipitation (MICP), which utilizes a biologically-based process to precipitate calcium carbonate. If properly controlled MICP can successfully seal fractures, high permeability zones, and compromised wellbore cement in the vicinity of wellbores and in nearby caprock, thereby improving the storage security of geologically-stored carbon dioxide. This report describes an MICP sealing field test performed on a 24.4 cm (9.625 inch) diameter well located on the Gorgas Steam Generation facility near Jasper, Alabama. The research was aimed at (1) developing methods for delivering MICP promoting fluids downhole using conventional oil field technologies and (2) assessing the ability of MICP to seal cement and formation fractures in the near wellbore region in a sandstone formation. Both objectives were accomplished successfully during a field test performed during the period April 1-11, 2014. The test resulted in complete biomineralization sealing of a horizontal fracture located 340.7 m (1118 feet) below ground surface. A total of 24 calcium injections and six microbial inoculation injections were required over a three day period in order to achieve complete sealing. The fractured region was considered completely sealed when it was no longer possible to inject fluids into the formation without exceeding the initial formation fracture pressure. The test was accomplished using conventional oil field technology including an 11.4 L (3.0 gallon) wireline dump bailer for injecting the biomineralization materials downhole. Metrics indicating successful MICP sealing included reduced injectivity during seal formation, reduction in pressure falloff, and

  1. An Analysis of Theories Related to Experiential Learning for Practical Ethics in Science and Technology

    Science.gov (United States)

    Parahakaran, Suma

    2017-01-01

    Learners in higher education are self -driven to attain goals and objectives of what is required by the Universities for career prospects in the fields of Sciences and Technology. This paper analyses theories of experiential learning which will contribute to implementation of Ethical behaviors in science and technology towards citizenship…

  2. Enterprise Social Networking: Technology Acceptance Related to Personality, Age, and Gender

    Science.gov (United States)

    Rochelle, Joseph

    2017-01-01

    In this dissertation, the researcher examined and added to the body of knowledge within the project change management field of technology implementation. The rationale behind the study was to evaluate technology acceptance of Enterprise Social Networking (ESN), which has been widely implemented across over 90% of the "Fortune" 500…

  3. Reading comics for the field of International Relations

    DEFF Research Database (Denmark)

    Hansen, Lene

    2017-01-01

    This article draws attention to a medium that has escaped the attention of International Relations scholars: comics. Comics are combinations of text and drawings and they come in a variety of formats: as newspaper strips, as stories printed in magazines and as long narratives presented in free...... through which central questions on the research agenda of International Relations scholars working on visuality, practices and intertextuality can be pursued. Drawing on comics scholarship, this article presents a theoretical framework aimed specifically at analysing comics as international relations......-standing books. Comics have been central to how generations of children have encountered foreign places and comics artists have successfully captured public attention, with comics offering explicit engagements with foreign policy events. Theoretically, comics provide a unique combination of text and images...

  4. Relation between Learning Content in Elementary School and Technology Education in Junior High School

    OpenAIRE

    白崎, 清; 山本, 利一

    2009-01-01

    The relation between learning content in the elementary school and Technology education in junior high school was investigated. The object of the investigation was ministry’s curriculumguideline. As the result, the relation between Technology education and Society, Science, Arithmetic, Drawing and Handicrafts and Life Environment Studies was confirmed. It is important to make the guidance plan in respect of this relation, when the technology education course studys it.

  5. Classifying Health Information Technology patient safety related incidents – an approach used in Wales

    Science.gov (United States)

    Warm, D.; Edwards, P.

    2012-01-01

    Interest in the field of patient safety incident reporting and analysis with respect to Health Information Technology (HIT) has been growing over recent years as the development, implementation and reliance on HIT systems becomes ever more prevalent. One of the rationales for capturing patient safety incidents is to learn from failures in the delivery of care and must form part of a feedback loop which also includes analysis; investigation and monitoring. With the advent of new technologies and organizational programs of delivery the emphasis is increasingly upon analyzing HIT incidents. This thematic review had two objectives, to test the applicability of a framework specifically designed to categorize HIT incidents and to review the Welsh incidents as communicated via the national incident reporting system in order to understand their implications for healthcare. The incidents were those reported as IT/ telecommunications failure/ overload. Incidents were searched for within a national reporting system using a standardized search strategy for incidents occurring between 1st January 2009 and 31st May 2011. 149 incident reports were identified and classified. The majority (77%) of which were machine related (technical problems) such as access problems; computer system down/too slow; display issues; and software malfunctions. A further 10% (n = 15) of incidents were down to human-computer interaction issues and 13% (n = 19) incidents, mainly telephone related, could not be classified using the framework being tested. On the basis of this review of incidents, it is recommended that the framework be expanded to include hardware malfunctions and the wrong record retrieved/missing data associated with a machine output error (as opposed to human error). In terms of the implications for clinical practice, the incidents reviewed highlighted critical issues including the access problems particularly relating to the use of mobile technologies. PMID:23646074

  6. Classifying health information technology patient safety related incidents - an approach used in Wales.

    Science.gov (United States)

    Warm, D; Edwards, P

    2012-01-01

    Interest in the field of patient safety incident reporting and analysis with respect to Health Information Technology (HIT) has been growing over recent years as the development, implementation and reliance on HIT systems becomes ever more prevalent. One of the rationales for capturing patient safety incidents is to learn from failures in the delivery of care and must form part of a feedback loop which also includes analysis; investigation and monitoring. With the advent of new technologies and organizational programs of delivery the emphasis is increasingly upon analyzing HIT incidents. This thematic review had two objectives, to test the applicability of a framework specifically designed to categorize HIT incidents and to review the Welsh incidents as communicated via the national incident reporting system in order to understand their implications for healthcare. The incidents were those reported as IT/ telecommunications failure/ overload. Incidents were searched for within a national reporting system using a standardized search strategy for incidents occurring between 1(st) January 2009 and 31(st) May 2011. 149 incident reports were identified and classified. The majority (77%) of which were machine related (technical problems) such as access problems; computer system down/too slow; display issues; and software malfunctions. A further 10% (n = 15) of incidents were down to human-computer interaction issues and 13% (n = 19) incidents, mainly telephone related, could not be classified using the framework being tested. On the basis of this review of incidents, it is recommended that the framework be expanded to include hardware malfunctions and the wrong record retrieved/missing data associated with a machine output error (as opposed to human error). In terms of the implications for clinical practice, the incidents reviewed highlighted critical issues including the access problems particularly relating to the use of mobile technologies.

  7. Geothermal technology publications and related reports: a bibliography, January 1984-December 1985

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, D.L. (ed.)

    1986-09-01

    Technological limitations restrict the commercial availability of US geothermal resources and prevent effective evaluation of large resources, as magma, to meet future US needs. The US Department of Energy has asked Sandia to serve as the lead laboratory for research in Geothermal Technologies and Magma Energy Extraction. In addition, technology development and field support has been provided to the US Continental Scientific Drilling Program. Published results for this work from January 1984 through December 1985 are listed in this bibliography.

  8. Status of technologies related to radioactive waste management and disposal

    International Nuclear Information System (INIS)

    1979-09-01

    The document discusses the status of technologies relevant to radioactive waste management and disposal, as defined by the INFCE Working Group 7 study. All fuel cycle wastes, with the exception of mill tailings, are placed in mined geologic repositories. In addition to the availability of technologies, the document discusses the: a) importance of the systems viewpoint, b) importance of modeling, c) need for site-specific investigations, d) consideration of future sub-surface human activities and e) prospects for successful isolation. In the sections on waste isolation and repository safety assessments, principal considerations are discussed. The document concludes that successful isolation of radioactive wastes from the biosphere appears technically feasible for periods of thousands of years provided that the systems view is used in repository siting and design

  9. Embryo transfer and related technologies in sheep reproduction

    OpenAIRE

    Loi, Pasqualino; Ptak, Grazyna; Dattena, Maria; Ledda, Sergio; Naitana, Salvatore; Cappai, Pietro

    1998-01-01

    This paper reviews the status of embryo transfer and the major technologies applied to preimplantation of embryos in sheep. Embryo production from superovulated ewes is hindered by an unpredictable response to hormonal treatment. Progress in this area should be expected by an appropriated control of follicular development with gonadotropin-releasing hormone (GnRH) agonist or antagonist prior to gonadotrophin administration. Simple protocols for the cryopreservation of sheep embryos by vitrifi...

  10. Information Technology Management: Hurricane Katrina Disaster Recovery Efforts Related to Army Information Technology Resources

    National Research Council Canada - National Science Library

    Jolliffe, Richard B; Burton, Bruce A; Wicecarver, Jacqueline L; Kince, Therese M; Ryan, Susan R; Price, Matthew J; Cleveland, Karma J; N. Pugh, Jacqueline; Milner, Jillisa H; Johnson, Meredith H

    2006-01-01

    ... of Louisiana, Mississippi, Alabama, and Florida with Category 3 winds and torrential rain. This audit report is the first in a planned series of audits on the effects of Hurricane Katrina on DoD information technology resources...

  11. EU policies in personalized medicine-related technologies

    NARCIS (Netherlands)

    Gaisser, S.; Vignola-Gagné, E.; Hüsing, B.; Enzing, C.; Valk, T. van der

    2009-01-01

    Against the background of a number of first drug-diagnostic co-products developed and introduce into the European market, European decision-makers feel impelled to react and position themselves in the field of personalized medicine. Their reactions cover a broad range, from the analysis of knowledge

  12. Proceedings of the international conference on nascent technologies in the engineering fields of mechanical, electrical, electronics and telecommunication and computer/information technology: souvenir

    International Nuclear Information System (INIS)

    2015-01-01

    This conference contains papers on grid computing, advanced networking, data mining, biometric technologies, social networks and social aspects of information technology, robotics and mechatronics, advances in manufacturing technology, modelling and simulation of mechanical systems, recent trends in refrigeration and air conditioning, energy conservation and alternative fuels and advances in vibration control and its techniques. It also addresses issues in the field of power generation transmission and distribution, energy management and energy efficiency, applications of power electronics and solid state devices, renewable energy technology, distributed generation and micro grid, drives, controls and automation and power quality. The electronics and telecommunication track received good response in the fields of wired and wireless communication, advanced communications, digital signal processing and its applications, optical and microwave communication, embedded and VLSI technology, micro electronics and nano-technology, antenna applications and solid state devices. Papers relevant to INIS are indexed separately

  13. Integrating Geospatial Technologies into Existing Teacher Education Coursework: Theoretical and Practical Notes from the Field

    Science.gov (United States)

    Kerr, Stacey

    2016-01-01

    Although instruction related to learning management systems and other educational applications in teacher education programs has increased, the potential of geospatial technologies has yet to be widely explored and considered in the teacher education literature, despite its ability to function as an engaging pedagogical tool with teacher…

  14. EPA-developed, patented technologies related to waste that are available for licensing

    Science.gov (United States)

    Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace. These technologies relate to methods of managing and remediating waste.

  15. EPA-developed, patented technologies related to pollution prevention that are available for licensing.

    Science.gov (United States)

    Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace. These technologies primarily relate to contaminant removal in the environment.

  16. EPA-developed, patented technologies related to air quality that are available for licensing

    Science.gov (United States)

    Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace. These technologies relate to monitoring and sampling air quality.

  17. EPA-developed, patented technologies related to vehicles and fuel emissions

    Science.gov (United States)

    Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace. These technologies primarily relate to efficient vehicle systems and hybrid or diesel engines.

  18. Instrumentation for Applied Physics and Industrial Applications: Applications of Detectors in Technology, Medicine and Other Fields

    CERN Document Server

    Hillemanns, H

    2011-01-01

    Instrumentation for Applied Physics and Industrial Applications in 'Applications of Detectors in Technology, Medicine and Other Fields', part of 'Landolt-Börnstein - Group I Elementary Particles, Nuclei and Atoms: Numerical Data and Functional Relationships in Science and Technology, Volume 21B2: Detectors for Particles and Radiation. Part 2: Systems and Applications'. This document is part of Part 2 'Principles and Methods' of Subvolume B 'Detectors for Particles and Radiation' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the Section '7.3 Instrumentation for Applied Physics and Industrial Applications' of Chapter '7 Applications of Detectors in Technology; Medicine and Other Fields' with the content: 7.3 Instrumentation for Applied Physics and Industrial Applications 7.3.1 Applications of HEP Detectors 7.3.2 Fast Micro- and Nanoelectronics for Particle Detector Readout 7.3.2.1 Fast Counting Mode Front End Electronics 7.3.2.2 NINO,...

  19. Detectors in Medicine and Biology: Applications of Detectors in Technology, Medicine and Other Fields

    CERN Document Server

    Lecoq, P

    2011-01-01

    Detectors in Medicine and Biology in 'Applications of Detectors in Technology, Medicine and Other Fields', part of 'Landolt-Börnstein - Group I Elementary Particles, Nuclei and Atoms: Numerical Data and Functional Relationships in Science and Technology, Volume 21B2: Detectors for Particles and Radiation. Part 2: Systems and Applications'. This document is part of Part 2 'Principles and Methods' of Subvolume B 'Detectors for Particles and Radiation' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the Section '7.1 Detectors in Medicine and Biology' of Chapter '7 Applications of Detectors in Technology; Medicine and Other Fields' with the content: 7.1 Detectors in Medicine and Biology 7.1.1 Dosimetry and medical imaging 7.1.1.1 Radiotherapy and dosimetry 7.1.1.2 Status of medical imaging 7.1.1.3 Towards in-vivo molecular imaging 7.1.2 X-Ray radiography and computed tomography (CT) 7.1.2.1 Different X-Ray imaging modalities 7.1.2.2 Detec...

  20. FACTORS OF INFLUENCE ON THE ENTREPRENEURIAL INTEREST: AN ANALYSIS WITH STUDENTS OF INFORMATION TECHNOLOGY RELATED COURSES

    Directory of Open Access Journals (Sweden)

    Diego Guilherme Bonfim

    2009-10-01

    Full Text Available The purpose of the research was to analyze the entrepreneurial interest of students in information technology related courses. A literature review was performed, from which four hypotheses were announced, affirming that the student interest in entrepreneurial activity is influenced by (1 the perceived vocation of the area, (2 the ownership of a company, (3 the perceived social support from friends and family, and (4 the entrepreneurial skills mastery. A field study was developed, with data collected from the 171 students of higher education institutions from Fortaleza. The data were analyzed by using statistical techniques of descriptive analysis, analysis of variance, and multiple regression analysis. It was found that: (1 students, in general, have a moderate predisposition to engage in entrepreneurial activities; (2 the entrepreneurial interest is influenced by the perceived entrepreneurial vocation of the area, the social support, and the perceived strategic entrepreneurial skills mastery.

  1. STEM field courses that increase interest, opinions and confidence in conservation- related fields

    Science.gov (United States)

    Christensen, B. A.; Freeman, A. S.; Donovan, C.; Cooperstein, D.; Foellmer, M.; Ward, A.

    2016-12-01

    Students in the Environmental Studies and Biology programs at Adelphi University, situated in the NYC metropolitan area, have had little exposure to the outdoors or nature and are often reluctant to engage in field activities. We developed three courses to provide outdoor experiences at different levels of intensity, financial and travel/ time commitments. Adelphi in Australia is a three-week field course taught mostly at a marine station that includes day and night hikes, snorkeling on the Great Barrier Reef (GBR) and independent research. Adelphi in the U.S. Virgin Islands is a one-week field `starter course' focusing on snorkeling and hiking. Observing Nature is an on-campus, once a week course with nature-based readings, weekend hikes and camping. It was developed after Hurricane Sandy revealed a lack of experience and confidence living without some modern infrastructure. We evaluated student opinions, interests and career goals in a survey administered at the start and at the end of the course that focused on knowledge, skills, opinion, and interest in STEM. Opinion questions addressed confidence, awareness of conservation issues, and interest in outdoor activities. The survey confirmed most of our students have a limited relationship with the outdoors when they start our field classes. More than half had never camped. Most had learned about nature through school trips and family. When asked to rank hiking against other activities, the majority regularly placed hiking below `going to the beach' and 'watching a movie'. The post-survey asked how students would apply what they had learned (interest in the environment; staying in the sciences). The generally positive results indicate the courses play an important role in connecting our students with the outdoors, and may have a lasting impact if they in turn connect others or get involved with local conservation programs.

  2. Real-Time Measurement of Rates of Outdoor Airflow into HVACSystems: A Field Study of Three Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William J.; Sullivan, Douglas P.; Faulkner, David

    2005-09-01

    Technologies for real-time continuous measurement of the flow rates of outdoor air (OA) into HVAC systems are now available commercially. Our prior papers reported on laboratory-based evaluations of these measurement technologies and this document describes the methods and results of a field study of the accuracy of three of these technologies. From the field study data, we determined that neither wind speed nor wind direction have an important adverse impact on measurement accuracy. The field study confirmed that these three measurement technologies can provide reasonably accurate measurements of outdoor air intake rates in field settings, if the pressure signals are measured with high accuracy. Some of the pressure transducers marketed for use with commercial HVAC systems were determined to be sufficiently accurate for this application. Given the significant impact of OA flow rates on both energy use and occupant health, more widespread use of technologies that provide for real time measurements of OA flow rates seems warranted.

  3. Big data related technologies, challenges and future prospects

    CERN Document Server

    Chen, Min; Zhang, Yin; Leung, Victor CM

    2014-01-01

    This Springer Brief provides a comprehensive overview of the background and recent developments of big data. The value chain of big data is divided into four phases: data generation, data acquisition, data storage and data analysis. For each phase, the book introduces the general background, discusses technical challenges and reviews the latest advances. Technologies under discussion include cloud computing, Internet of Things, data centers, Hadoop and more. The authors also explore several representative applications of big data such as enterprise management, online social networks, healthcar

  4. Electric and Magnetic Fields (EMF) RAPID Program Engineering Project 8: FINAL REPORT, Evaluation of Field Reduction Technologies, Volume 1 (Report) and Volume 2 (Appendices)

    Energy Technology Data Exchange (ETDEWEB)

    Commonwealth Associates, Inc.; IIT Research Institute

    1997-08-01

    This draft report consists of two volumes. Volume 1, the main body, contains an introducto~ sectionj an overview of magnetic fields sectio~ and field reduction technology evaluation section. Magnetic field reduction methods are evalpated for transmission lines, distribution Iines,sulxtations, building wiring applkmd machinery, and transportation systems. The evaluation considers effectiveness, co% and other ftiors. Volume 2 contains five appendices, Append~ A presents magnetic field shielding information. Appendices B and C present design assumptions and magnetic field plots for transmission and distribution lines, respectively. Appendices D and E present cost estimate details for transmission and distribution limes, respectively.

  5. Near-Field Coupling Communication Technology For Human-Area Networking

    Directory of Open Access Journals (Sweden)

    Ryoji Nagai

    2012-12-01

    Full Text Available We propose a human-area networking technology that uses the surface of the human body as a data transmission path and uses near-field coupling TRXs. This technology aims to achieve a "touch and connect" form of communication and a new concept of "touch the world" by using a quasi-electrostatic field signal that propagates along the surface of the human body. This paper explains the principles underlying near-field coupling communication. Special attention has been paid to common-mode noise since our communication system is strongly susceptible to this. We designed and made a common-mode choke coil and a transformer to act as common-mode noise filters to suppress common-mode noise. Moreover, we describe how we evaluated the quality of communication using a phantom model with the same electrical properties as the human body and present the experimental results for the packet error rate (PER as a function of the signal to noise ratio (SNR both with the common-mode choke coil or the transformer and without them. Finally, we found that our system achieved a PER of less than 10-2 in general office rooms using raised floors, which corresponded to the quality of communication demanded by communication services in ordinary office spaces.

  6. Application of new geological modeling technology in secondary development in Daqing oil field

    Science.gov (United States)

    Li, C. L.; Zhang, J. H.; Li, H. K.; Liu, C.

    2016-08-01

    The reconfiguration on underground geology system is one of the key techniques for secondary development in Daqing oil field. The geological modeling is the unique method to characterize new knowledge system of reservoir. The development history of maturing field is long. The structure of maturing field is complex and the distribution of oil remaining is highly scattered. The difficulty of adjustment and potential tapping is great. In viewing of demand for secondary development, the strategies and methods of geological modeling are proposed. According to the characteristics that many faults crosscut each other, the clue of fractional simulation—key horizon controlling—overall structural modeling is carried out to accurately and effectively build fine structural models. In order to approximate the real microfacies simulation effect, microfacies modeling technology of multiple iterations and geology tendency under vertical and lateral geology tendency constraint is used. And the attribute models could approximate the real parametric distribution. Moreover, in viewing of the key and potential reservoir sand, the countermeasure on configuration modeling by different stochastic simulation methods and step simulation is proposed to rapidly build geologic models. The geologic models are scientific and feasible. The above-mentioned countermeasures and methods have been used in secondary development of Daqing oilfield and the effect was well. This new technology presents directive sense.

  7. Innovation in technology for the least product price and cost - a new minimum cost relation for reductions during technological learning

    International Nuclear Information System (INIS)

    Duffey, R.B.

    2004-01-01

    By analogy with the concepts of human learning, we show and introduce a new method to obtain least product cost and price that includes the effect of innovation and technological learning in manufacturing and production. This key result is a new paradigm instead of the usual economic 'power law' formulation. The new analysis is based on extensive analysis of many technological systems, and is directly related to the presence of learning as experience is accumulated. The results agree with the observed data. By using a consistent basis, the method replaces previous empirical 'power law' descriptions of the technological learning curve with a new 'marginal minimum cost equation' (MCE). (author)

  8. Numerical Hydrodynamics in Strong-Field General Relativity

    Science.gov (United States)

    East, William Edward

    In this thesis we develop and test methods for numerically evolving hydrodynamics coupled to the Einstein field equations, and then apply them to several problems in gravitational physics and astrophysics. The hydrodynamics scheme utilizes high-resolution shock-capturing techniques with flux corrections while the Einstein equations are evolved in the generalized harmonic formulation using finite difference methods. We construct initial data by solving the constraint equations using a multigrid algorithm with free data chosen based on superposing isolated compact objects. One application we consider is the merger of black hole-neutron star and neutron star-neutron star binaries that form through dynamical capture, as may occur in globular clusters or galactic nuclei. These systems can merge with non-negligible orbital eccentricity and display significant variability in dynamics and outcome as a function of initial impact parameter. We study the electromagnetic and gravitational-wave transients that these mergers may produce and their prospects for being detected with upcoming observations. We also introduce a numerical technique that allows solutions to the full Einstein equations to be obtained for extreme-mass-ratio systems where the spacetime is dominated by a known background solution. This technique is based on using the knowledge of a background solution to subtract off its contribution to the truncation error. We use this to study the tidal effects and gravitational radiation from a solar-type star falling into a supermassive black hole. Finally, we utilize general-relativistic hydrodynamics to study ultrarelativistic black hole formation. We study the head-on collision of fluid particles well within the kinetic energy dominated regime (Lorentz factors of 8-12). We find that black hole formation does occur at energies a factor of a few below simple hoop conjecture estimates. We also find that near the threshold for black hole formation, the collision leads to

  9. Dispersion relations from the hard thermal loop effective action in a magnetic field

    CERN Document Server

    Elmfors, Per

    1995-01-01

    Dispersion relations for fermions at high temperature and in a background magnetic field are calculated in two different ways. First from a straightforward one-loop calculation where, in the weak field limit, we find an expression closely related to the standard dispersion relations in the absence of the magnetic field. Secondly, we derive the dispersion relations directly from the Hard Thermal Loop effective action, which allows for an exact solution (i.e. to all orders in the external field), up to the last numerical integrals.

  10. Examining the Relative Influence of Risk and Control on Intention to Adopt Risky Technologies

    Directory of Open Access Journals (Sweden)

    Sumeet Gupta

    2010-12-01

    Full Text Available For technologies such as electronic commerce, mobile payments, internet and mobile banking etc. customers are concerned about security issues that arise as a result of adoption of these technologies. However, in practice, we find that customers forgo their considerations of risk in the technology, if the benefits of using the technology overpower the risks involved in using the technology. Understanding their relative roles in technology adoption will help technology developers focus their efforts on either of them to improve technology adoption. Results of this study reveal that in adopting a technology, customers are guided more by the perception of control rather than by the perception of risk. Implications for theory and practice are discussed.

  11. The Contribution of Health Technology Assessment, Health Needs Assessment, and Health Impact Assessment to the Assessment and Translation of Technologies in the Field of Public Health Genomics

    NARCIS (Netherlands)

    Rosenköttera, N.; Vondeling, Hindrik; Blancquaert, I.; Mekel, O.C.L.; Kristensen, F.B.; Brand, A.

    2011-01-01

    The European Union has named genomics as one of the promising research fields for the development of new health technologies. Major concerns with regard to these fields are, on the one hand, the rather slow and limited translation of new knowledge and, on the other hand, missing insights into the

  12. Design of Prototype Payment Application System With Near Field Communication (NFC Technology based on Android

    Directory of Open Access Journals (Sweden)

    Huda Ubaya

    2012-06-01

    Full Text Available Since the late 1990s, people have enjoyed a comfortable lifestyle. Mobile devices supported by the development of wireless networks have spread throughout the world. People can get information, order tickets, download songs and perform commercial transactions, called mobile commerce. Mobile commerce applications become the most popular application for mobile device users who want to do business and financial transactions easily and securely, anytime and anywhere they are. Today the use of physical cash is experiencing a decline in popularity in the business world, because it is being replaced by non-physical payments are often called electronic money (e-money. An important technology behind mobile payments is called Near Field Communication (NFC. As an indication that the NFC has tremendous business potential, leading companies like Nokia, Microsoft, Visa Inc., and MasterCard Worldwide and NXP Semiconductors, is actively engaged on them. Payment processing integrated with NFC technology based mobile operating system that is a trend today is Android that support NFC technology is version 2.3.3 Gingerbread. The prototype application is designed to pay for 2 on the user side of the user as consumer and the merchant side as a trader or seller by using the handset that already have NFC technology is Google Samsung Nexus S. Pay an application prototype also implements the concept of security in e-commerce transactions by using the protocol-to-Tag Tag so that the user needs for security and comfort during the financial transaction are met.

  13. Laser scanning cytometry and its applications: a pioneering technology in the field of quantitative imaging cytometry.

    Science.gov (United States)

    Henriksen, Melvin; Miller, Bruce; Newmark, Judith; Al-Kofahi, Yousef; Holden, Elena

    2011-01-01

    Imaging cytometry plays an increasingly important role in all fields of biological and medical sciences. It has evolved into a complex and powerful discipline amalgamating image acquisition technologies and quantitative digital image analysis. This chapter presents an overview of the complex and ever-developing landscape of imaging cytometry, highlighting the imaging and quantitative performance of a wide range of available instruments based on their methods of sample illumination and the detection technologies they employ. Each of these technologies has inherent advantages and shortcomings stemming from its design. It is therefore paramount to assess the appropriateness of all of the imaging cytometry options available to determine the optimal choice for specific types of studies. Laser scanning cytometry (LSC), the original imaging cytometry technology, is an attractive choice for analysis of both cellular and tissue specimens. Quantitative performance, flexibility, and the benefits of preserving native sample architecture and avoiding the introduction of artificial signals, particularly in cell-signaling studies and multicolor tissue analysis, are speeding the adoption of LSC and opening up new possibilities for developing sophisticated applications. Copyright © 2011 Elsevier Inc. All rights reserved.

  14. Integration of Modern Information Technologies in the Field of Financial Accounting

    Directory of Open Access Journals (Sweden)

    Adrian LUPASC

    2011-11-01

    Full Text Available Financial accounting activities are currently influenced as many other important areas that characterize and surrounds the activities within each economic entity, the avalanche of modern information technologies, which are able to improve specific business processes and to ensure future business success. Approach analysis of the impact of new technologies on this field should be so as a starting point to identify the opportunities and the benefits they would bring to specific activities. Information and communication technologies are in use both at the individual level and at the organizational level with the flexibility of the increasingly high, using a huge volume of information that financial accounting with direct impact on all human activities. Basically, it has already made the passage to a new stage:the global network society, whose main features are digitizing and interconnectivity. In this sense, this paper has as its main objective of examining the impact of modern information technologies may have on the financial accounting domain and the identification and submission directions for their integration within organizations.

  15. Electromagnetic Fields, Pulsed Radiofrequency Radiation, and Epigenetics: How Wireless Technologies May Affect Childhood Development.

    Science.gov (United States)

    Sage, Cindy; Burgio, Ernesto

    2018-01-01

    Mobile phones and other wireless devices that produce electromagnetic fields (EMF) and pulsed radiofrequency radiation (RFR) are widely documented to cause potentially harmful health impacts that can be detrimental to young people. New epigenetic studies are profiled in this review to account for some neurodevelopmental and neurobehavioral changes due to exposure to wireless technologies. Symptoms of retarded memory, learning, cognition, attention, and behavioral problems have been reported in numerous studies and are similarly manifested in autism and attention deficit hyperactivity disorders, as a result of EMF and RFR exposures where both epigenetic drivers and genetic (DNA) damage are likely contributors. Technology benefits can be realized by adopting wired devices for education to avoid health risk and promote academic achievement. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

  16. Electronic data capture platform for clinical research based on mobile phones and near field communication technology.

    Science.gov (United States)

    Morak, Jürgen; Schwetz, Verena; Hayn, Dieter; Fruhwald, Friedrich; Schreier, Gunter

    2008-01-01

    Electronic data capture systems support data acquisition for clinical research and enable the evaluation of new investigational medical devices. In case of evaluating a device the most challenging part is the user interface i.e. the solution how to acquire the data within a clinical setting and to synchronize them with a web-based data centre. The aim of this paper is to describe the development of an electronic data capture system with a mobile data input solution based on mobile phones and Near Field Communication technology. This system was evaluated within a real clinical setting and demonstrated high usability, security and reliability.

  17. Application of low pressure plasma technology in the field of environmental protection

    International Nuclear Information System (INIS)

    Sun Yabing

    2000-01-01

    The characteristics of low pressure plasma produced by a gas discharges lie in that the energy of the electrons are much higher than that of the heavy particles in the system. The low-pressure plasma treatment technology for the environmental contaminants was synthetically studied, and the reaction processing and mechanism between the low-pressure plasma and the environmental contaminants were theoretically analyzed. At last, the prospects and existing problems on the application of low-pressure plasma in the field of environmental protection were discussed

  18. Biosensor technology in aging research and age-related diseases.

    Science.gov (United States)

    He, Yulong; Wu, Yuehong; Mishra, Anuja; Acha, Victor; Andrews, Thomas; Hornsby, Peter J

    2012-01-01

    Cell- and tissue-based biosensors comprise genetically engineered proteins that are incorporated into cells ex vivo or into cells of tissues in vivo. They enable the investigator to sense levels of hormones, drugs, or toxins, continuously and noninvasively, using biophotonics or other physical principles, and could potentially be used over the entire lifespan of an experimental animal. The present work reviews the state of the art of cell- and tissue-based biosensors and discusses how they could be of value in aging research. Examples of recently developed biosensors are given, including those that detect levels of a cytokine (TNFα) and drugs (activators of the mTOR pathway). Finally, we discuss the hurdles that would have to be overcome for biosensor technology to be used in humans in monitoring health status and disease treatment in late life. Copyright © 2011 Elsevier B.V. All rights reserved.

  19. Technical workshop on safeguards, verification technologies, and other related experience

    International Nuclear Information System (INIS)

    1998-01-01

    The aim of the Technical Workshop on safeguards was to encourage a clearer understanding of the IAEA Safeguards System, its origins and evolution and the present state of the art. Presentations held by the IAEA officials and outside experts examined as well other components of the non-proliferation regime, the current practices and procedures, and the future prospects. A series of presentations described the characteristics of the interaction between global and regional verification systems and described relevant past and present experience. Prominence given to such state of the art verification technologies as environmental sampling, satellite imaging and monitoring thorough remote and unattended techniques demonstrated, beyond any doubt, the essentially dynamic nature of verification. It is generally acknowledged that there have been major achievements in preventing spread of nuclear weapons, but no verification system can in itself prevent proliferation

  20. Technology sourcing over the technology life cycle : A study about the moderating effect of the technology life cycle on the relation between technology sourcing and firm performance

    NARCIS (Netherlands)

    Stolwijk, C.C.M.

    2012-01-01

    How do external and internal technology sourcing influence the innovative and market performance of firms over the technology life-cycle? The impact of technology sourcing on firm performance during different phases of the technology life cycle represents a gap in academic literature. Practically,

  1. Statements Relating to the Impact of Technological Change. Technology and the American Economy, Appendix, Volume VI.

    Science.gov (United States)

    National Commission on Technology, Automation and Economic Progress, Washington, DC.

    Forty-seven statements by industrial and business spokesmen, union and association representatives, and professors concern the broad impact of technological change on individuals, establishments, and society in general. Some of the longer presentations are (1) "The Poverty and Unemployment Crisis," by Walter Buckingham, (2) "Technological…

  2. A design study for a medium-scale field demonstration of the viscous barrier technology

    International Nuclear Information System (INIS)

    Moridis, G.; Yen, P.; Persoff, P.; Finsterle, S.; Williams, P.; Myer, L.; Pruess, K.

    1996-09-01

    This report is the design study for a medium-scale field demonstration of Lawrence Berkeley National Laboratory's new subsurface containment technology for waste isolation using a new generation of barrier liquids. The test site is located in central California in a quarry owned by the Los Banos Gravel Company in Los Banos, California, in heterogeneous unsaturated deposits of sand, silt, and -ravel typical of many of the and DOE cleanup sites and particularly analogous to the Hanford site. The coals of the field demonstration are (a) to demonstrate the ability to create a continuous subsurface barrier isolating a medium-scale volume (30 ft long by 30 ft wide by 20 ft deep, i.e. 1/10th to 1/8th the size of a buried tank at the Hanford Reservation) in the subsurface, and (b) to demonstrate the continuity, performance, and integrity of the barrier

  3. Field studies of safety security rescue technologies through training and response activities

    Science.gov (United States)

    Murphy, Robin R.; Stover, Sam

    2006-05-01

    This paper describes the field-oriented philosophy of the Institute for Safety Security Rescue Technology (iSSRT) and summarizes the activities and lessons learned during calendar year 2005 of its two centers: the Center for Robot-Assisted Search and Rescue and the NSF Safety Security Rescue industry/university cooperative research center. In 2005, iSSRT participated in four responses (La Conchita, CA, Mudslides, Hurricane Dennis, Hurricane Katrina, Hurricane Wilma) and conducted three field experiments (NJTF-1, Camp Hurricane, Richmond, MO). The lessons learned covered mobility, operator control units, wireless communications, and general reliability. The work has collectively identified six emerging issues for future work. Based on these studies, a 10-hour, 1 continuing education unit credit course on rescue robotics has been created and is available. Rescue robots and sensors are available for loan upon request.

  4. Identification and prioritization of rail squat defects in the field using rail magnetisation technology

    Science.gov (United States)

    Kaewunruen, Sakdirat

    2015-04-01

    Inevitably, rail squats and studs are continuing to be a serious problem for railway organisations around the world in the 21st century. They are typically classified as the growth of any cracks that have grown longitudinally through the subsurface and some of the cracks propagating to the bottom of rails transversely, and have branched from initial longitudinal cracks with a depression of rail surface. The horizontal crack, which results in a depression of rail surface, induces increased maintenance level, more frequent monitoring, compromised rail testing (as the crack shields the signal echoes), and possible broken rails. This paper presents field investigations using a magnetised-rail testing device developed by MRX Technologies to identify and prioritise the rail squats. Most of the in situ squats were found on the high rail of the transition (variable-radius curved track), which is associated with rolling contact fatigue (RCF). This investigation highlights the field performance of the MRX's surface crack detection technology in comparison with the traditional ultrasonic method and detailed walking inspection. Visually, it was found in the field that the size of the RCF squats varies from very small to moderate. The predicted crack data were obtained by scanning the magnitised rails. The comparison of the actual crack depths (ultrasonic) and the predicted crack depths (MRX device) shows: • A possible correlation for small RCF/ squat cracks. • Poor interpretation of larger defects and welds. The field assessment also suggests some practical issues required for further development, including the detection of rail spalling, deep transverse crack, welding, and so on.

  5. A Survey of LIDAR Technology and Its Use in Spacecraft Relative Navigation

    Science.gov (United States)

    Christian, John A.; Cryan, Scott P.

    2013-01-01

    This paper provides a survey of modern LIght Detection And Ranging (LIDAR) sensors from a perspective of how they can be used for spacecraft relative navigation. In addition to LIDAR technology commonly used in space applications today (e.g. scanning, flash), this paper reviews emerging LIDAR technologies gaining traction in other non-aerospace fields. The discussion will include an overview of sensor operating principles and specific pros/cons for each type of LIDAR. This paper provides a comprehensive review of LIDAR technology as applied specifically to spacecraft relative navigation. HE problem of orbital rendezvous and docking has been a consistent challenge for complex space missions since before the Gemini 8 spacecraft performed the first successful on-orbit docking of two spacecraft in 1966. Over the years, a great deal of effort has been devoted to advancing technology associated with all aspects of the rendezvous, proximity operations, and docking (RPOD) flight phase. After years of perfecting the art of crewed rendezvous with the Gemini, Apollo, and Space Shuttle programs, NASA began investigating the problem of autonomous rendezvous and docking (AR&D) to support a host of different mission applications. Some of these applications include autonomous resupply of the International Space Station (ISS), robotic servicing/refueling of existing orbital assets, and on-orbit assembly.1 The push towards a robust AR&D capability has led to an intensified interest in a number of different sensors capable of providing insight into the relative state of two spacecraft. The present work focuses on exploring the state-of-the-art in one of these sensors - LIght Detection And Ranging (LIDAR) sensors. It should be noted that the military community frequently uses the acronym LADAR (LAser Detection And Ranging) to refer to what this paper calls LIDARs. A LIDAR is an active remote sensing device that is typically used in space applications to obtain the range to one or more

  6. INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2001-08-08

    The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California, through the testing and application of advanced reservoir characterization and thermal production technologies. The hope is that successful application of these technologies will result in their implementation throughout the Wilmington Field and, through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block II-A (Tar II-A) has been relatively inefficient because of several producibility problems which are common in SBC reservoirs: inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery and reduce operating costs, including: (1) Development of three-dimensional (3-D) deterministic and stochastic reservoir simulation models--thermal or otherwise--to aid in reservoir management of the steamflood and post-steamflood phases and subsequent development work. (2) Development of computerized 3-D visualizations of the geologic and reservoir simulation models to aid reservoir surveillance and operations. (3) Perform detailed studies of the geochemical interactions between the steam and the formation rock and fluids. (4) Testing and proposed application of a

  7. Research and development of HTR related technology, 2

    International Nuclear Information System (INIS)

    Midoriyama, Shigeru; Usui, Shinichi

    1981-01-01

    As the high temperature components for the experimental multi-purpose high temperature gas-cooled reactor, an intermediate heat exchanger, an auxiliary cooler, a steam generator, piping and valves are enumerated. They are required to function soundly under the condition of 1000 deg C and 40 kg/cm 2 g, and it is an important subject for the development of the experimental reactor to secure their reliability and soundness. Kawasaki Heavy Industries, Ltd., has constructed research facilities such as HTGL and OGL-1 for Japan Atomic Energy Research Institute, and HENDEL is constructed at present. The aim, policy and method of the development of high temperature components and piping are explained.The development test of high temperature components is performed by being divided into element technology test, partial model test, and small scale and large scale proving test. The intermediate heat exchanger and the auxiliary cooler at the present stage of development are shown. The test of piping forwarded at present is that of heat insulation structure and aseismatic capability. A large helium gas loop is installed in Kawasaki, which serves wide range of the development works. (Kako, I.)

  8. The Terminology of the Public Relations Field in the Slovenian Language

    Directory of Open Access Journals (Sweden)

    Monika Kalin Golob

    2013-06-01

    Full Text Available This article includes two starting points: (a the development of the Slovenian (and Croatian language in science and professions is being increasingly limited by the narrow comprehension of internationalised higher education and science; (b in the digital age, the fields of usage being lost in those languages are those not supported enough in terms of language technology. With the case of the Slovenian public relations terminology, we reveal that it is possible to confront both: on the basis of the previously formed corpus of professional texts, KoRP, which is linguistically earmarked and freely available online, and in the TERMIS project. We initially inferred one- or multi-word term candidates with the LUIZ programme, and then acquired the typical text environment and best dictionary examples automatically by means of the Sketch Engine tool and its application Word Sketches together with the GDEX tool. The infrastructure formed during the project will be freely available after the conclusion of the project (June 2013, and the dictionary, which will include 2,000 terms regarding public relations, may be understood as a model for the creation of modern terminology dictionaries of other professions as well.

  9. Reference radiation fields - Simulated workplace neutron fields - Part 2: Calibration fundamentals related to the basic quantities

    International Nuclear Information System (INIS)

    2008-01-01

    ISO 8529-1, ISO 8529-2 and ISO 8529-3, deal with the production, characterization and use of neutron fields for the calibration of personal dosimeters and area survey meters. These International Standards describe reference radiations with neutron energy spectra that are well defined and well suited for use in the calibration laboratory. However, the neutron spectra commonly encountered in routine radiation protection situations are, in many cases, quite different from those produced by the sources specified in the International Standards. Since personal neutron dosimeters, and to a lesser extent survey meters, are generally quite energy dependent in their dose equivalent response, it might not be possible to achieve an appropriate calibration for a device that is used in a workplace where the neutron energy spectrum and angular distribution differ significantly from those of the reference radiation used for calibration. ISO 8529-1 describes four radionuclide based neutron reference radiations in detail. This part of ISO 12789 includes the specification of neutron reference radiations that were developed to closely resemble radiation that is encountered in practice

  10. Broad frequency band full field measurements for advanced applications: Point-wise comparisons between optical technologies

    Science.gov (United States)

    Zanarini, Alessandro

    2018-01-01

    The progress of optical systems gives nowadays at disposal on lightweight structures complex dynamic measurements and modal tests, each with its own advantages, drawbacks and preferred usage domains. It is thus more easy than before to obtain highly spatially defined vibration patterns for many applications in vibration engineering, testing and general product development. The potential of three completely different technologies is here benchmarked on a common test rig and advanced applications. SLDV, dynamic ESPI and hi-speed DIC are here first deployed in a complex and unique test on the estimation of FRFs with high spatial accuracy from a thin vibrating plate. The latter exhibits a broad band dynamics and high modal density in the common frequency domain where the techniques can find an operative intersection. A peculiar point-wise comparison is here addressed by means of discrete geometry transforms to put all the three technologies on trial at each physical point of the surface. Full field measurement technologies cannot estimate only displacement fields on a refined grid, but can exploit the spatial consistency of the results through neighbouring locations by means of numerical differentiation operators in the spatial domain to obtain rotational degrees of freedom and superficial dynamic strain distributions, with enhanced quality, compared to other technologies in literature. Approaching the task with the aid of superior quality receptance maps from the three different full field gears, this work calculates and compares rotational and dynamic strain FRFs. Dynamic stress FRFs can be modelled directly from the latter, by means of a constitutive model, avoiding the costly and time-consuming steps of building and tuning a numerical dynamic model of a flexible component or a structure in real life conditions. Once dynamic stress FRFs are obtained, spectral fatigue approaches can try to predict the life of a component in many excitation conditions. Different

  11. The evaluation of a new technology for gunshot residue (GSR) analysis in the field

    Science.gov (United States)

    Hondrogiannis, Ellen; Andersen, Danielle; Miziolek, Andrzej W.

    2013-05-01

    There continues to be a need for improved technology to be used in theater to quickly and accurately identify the person who shot any weapon during a terrorist attack as well as to link a suspect to the actual weapon fired during a crime. Beyond this, in areas of conflict it would be desirable to have the capability to establish the source country for weaponry and ammunition. Gunshot residue (GSR) analysis is a reasonably well-studied technology area. Recent scientific publications have reported that the residues have a rich composition of both organic and inorganic compounds. For the purposes of identifying the manufacturer or country of origin for the ammunition, the inorganic components of GSR appear to be especially promising since their presence in the propellant and primer formulations are either specific to a given chemical formula, or they represent impurities in the manufacturing process that can be unique to a manufacturer or the source country for the chemicals used for propellants and primers. The Laser Induced Breakdown Spectroscopy (LIBS) technology has already demonstrated considerable capability for elemental fingerprinting, especially for inorganic/metallic components. A number of reports have demonstrated LIBS capability in forensics for matching materials such as inks, fabrics, paper, glass, and paint. This work describes the encouraging results of an initial study to assess a new commercial field-portable (battery operated) LIBS system for GSR analysis with gunshot residues having been collected from inside cartridge casings from 3 different ammunition manufacturers.

  12. Analytical relation between effective mode field area and waveguide dispersion in microstructure fibers.

    Science.gov (United States)

    Moenster, Mathias; Steinmeyer, Günter; Iliew, Rumen; Lederer, Falk; Petermann, Klaus

    2006-11-15

    For optical fibers exhibiting a radially symmetric refractive index profile, there exists an analytical relation that connects waveguide dispersion and the Petermann-II mode field radius. We extend the usefulness of this relation to the nonradially symmetric case of microstructure fibers in the anomalous dispersion regime, yielding a simple relation between dispersion and effective mode field area. Assuming a Gaussian mode distribution, we derive a fundamental upper limit for the effective mode field area that is required to obtain a certain amount of anomalous waveguide dispersion. This relation is demonstrated to show excellent agreement for fiber designs suited for supercontinuum generation and soliton lasers in the near infrared.

  13. Observer report about field tests with a FALCON 4G stand-off detector by SEC Technologies

    NARCIS (Netherlands)

    Meer, J.A. van der; Nieuwenhuizen, M.S.

    2016-01-01

    Field testing of the large distance stand-off CB detector FALCON 4G by SEC Technologies in Lipovsky Mikulas (Slovakia) was observed by 2 employees of TNO on 28 and 29 September 2016. Based on the experimental set-up as well as the execution by SEC Technologies TNO observed the tests employing the

  14. Look back and look forward to the future of computer applications in the field of nuclear science and technology

    International Nuclear Information System (INIS)

    Yang Yanming; Dai Guiling

    1988-01-01

    All previous National Conferences on computer application in the field of nuclear science and technology sponsored by the Society of Nuclear Electronics and Detection Technology are reviewed. Surveys are geiven on the basic situations and technique levels of computer applications for each time period. Some points concerning possible developments of computer techniques are given as well

  15. EXPERIENCE AND TRENDS OF TRAINIG SPECIALISTS IN THE FIELDS OF MATHMATICAL METHODS AND INFORMATION TECHNOLOGY IN HEALTH CARE

    Directory of Open Access Journals (Sweden)

    В С Томашевская

    2015-12-01

    Full Text Available The article describes the experience of implementing educational programs for bachelors and masters with focus on areas of training in the field of computer science with the introduction into educational process modern technologies, attracting the largest enterprises-employers and experts of the subject domain. As an example of this approach, describes the implementation of educational programs at the intersection of information technology and health care, and especially their Information Technology Services.

  16. LEARNING MATERIALS SELECTION FOR DIFFERENTIATED INSTRUCTION OF ENGLISH FOR SPECIFIC PURPOSES OF FUTURE PROFESSIONALS IN THE FIELD OF INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Oksana Synekop

    2017-09-01

    Full Text Available In conditions of differentiation the learning materials selection will optimize the training English for Specific Purposes of the future professionals in the field of information technology at university level. The purpose of the article is to define the basic unit of learning material, the factors of influence on the learning material selection, principles, criteria and the procedure of learning material selection in this paper. Reviewing the scientific achievements in the learning material selection in teaching English has become a basis for defining the factors of influence, principles and criteria in the research. The basic unit of learning material (learning English text for professional purposes is outlined. The factors of influence and principles (correspondence of learning materials to professional interests and needs of information technology students; necessary ability and accessibility; regarding the linguistic and stylistic necessity and sufficiency; availability of Internet sources information of the learning material selection are defined. Also, the qualitative criteria (authenticity; professional significance, relevance and informativeness; conformity of foreign language level and intellectual development of students; variety of genres and forms of speech, their sufficient filling by linguistic material; coherence, integrity, consistency, semantic completeness; topic conformity; situation conformity; unlimited access, reliability and exemplarity of Internet sources and the quantitative criteria (the amount of material of the learning material selection are highlighted. The process of English for Specific Purposes material selection (defining the disciplines of different cycles; defining spheres and related topics; outlining situations, communicative roles and intentions of professional communication; specifying the sources of selection; evaluating the texts; analysis of the knowledge, skills and sub-skills required for the

  17. Building America Case Study: Field Trial of an Aerosol-Based Enclosure Sealing Technology, Clovis, California

    Energy Technology Data Exchange (ETDEWEB)

    2016-05-01

    This report presents the results from several demonstrations of a new method for sealing building envelope air leaks using an aerosol sealing process developed by the Western Cooling Efficiency Center at UC Davis. The process involves pressurizing a building while applying an aerosol sealant to the interior. As air escapes through leaks in the building envelope, the aerosol particles are transported to the leaks where they collect and form a seal that blocks the leak. Standard blower door technology is used to facilitate the building pressurization, which allows the installer to track the sealing progress during the installation and automatically verify the final building tightness. Each aerosol envelope sealing installation was performed after drywall was installed and taped, and the process did not appear to interrupt the construction schedule or interfere with other trades working in the homes. The labor needed to physically seal bulk air leaks in typical construction will not be replaced by this technology. However, this technology is capable of bringing the air leakage of a building that was built with standard construction techniques and HERS-verified sealing down to levels that would meet DOE Zero Energy Ready Homes program requirements. When a developer is striving to meet a tighter envelope leakage specification, this technology could greatly reduce the cost to achieve that goal by providing a simple and relatively low cost method for reducing the air leakage of a building envelope with little to no change in their common building practices.

  18. Wide field fluorescence imaging in narrow passageways using scanning fiber endoscope technology

    Science.gov (United States)

    Lee, Cameron M.; Chandler, John E.; Seibel, Eric J.

    2010-02-01

    An ultrathin scanning fiber endoscope (SFE) has been developed for high resolution imaging of regions in the body that are commonly inaccessible. The SFE produces 500 line color images at 30 Hz frame rate while maintaining a 1.2-1.7 mm outer diameter. The distal tip of the SFE houses a 9 mm rigid scan engine attached to a highly flexible tether (minimum bend radius technologies, the unique characteristics of this system have allowed the SFE to navigate narrow passages without sacrificing image quality. To date, the SFE has been used for in vivo imaging of the bile duct, esophagus and peripheral airways. In this study, the standard SFE operation was tailored to capture wide field fluorescence images and spectra. Green (523 nm) and blue (440 nm) lasers were used as illumination sources, while the white balance gain values were adjusted to accentuate red fluorescence signal. To demonstrate wide field fluorescence imaging of small lumens, the SFE was inserted into a phantom model of a human pancreatobiliary tract and navigated to a custom fluorescent target. Both wide field fluorescence and standard color images of the target were captured to demonstrate multimodal imaging.

  19. Classifying Health Information Technology patient safety related incidents – an approach used in Wales

    OpenAIRE

    Warm, D.; Edwards, P.

    2012-01-01

    Interest in the field of patient safety incident reporting and analysis with respect to Health Information Technology (HIT) has been growing over recent years as the development, implementation and reliance on HIT systems becomes ever more prevalent. One of the rationales for capturing patient safety incidents is to learn from failures in the delivery of care and must form part of a feedback loop which also includes analysis; investigation and monitoring. With the advent of new technologies a...

  20. Research on technology environment improvement of related industries based on internet governance

    Science.gov (United States)

    Zhang, Jing; Guan, Zhongliang

    2017-08-01

    The technology of Internet is an important factor of industry’s development. Constructing a good technical environment is the foundation of the Internet and related industries’ development. This paper demonstrates the necessity of the construction and improvement of the Internet and the related industries technology environment through comparing the current situation of the related industries. It also points out that China needs to improve the environment of the Internet technology urgently. The paper establishes the technology demand pattern of different related industries, and explores strategies of the different Internet technology environment’s construction and perfection according to the different demand of the strong related Internet and the weak related Internet to the industries environment. This paper analyzes the factors that threaten the security of the Internet, and fully demonstrates the methods and tactics of establishing and improving the technology environment Internet hardware, the Internet and related industries in China under the basis of the framework of comprehensive management of Internet. This paper also studies the construction and improvement of the comprehensive management technology environment based on the Internet industry in China.

  1. The Current Situation and Future Prospects of International Relations in Japanese Higher Education Related Engineering Field

    Science.gov (United States)

    Taguchi, Shigenori

    With ongoing globalization, the role of higher education in developing excellent human resources who can play an active role in international society, among other things is becoming increasingly important. Recently, the international competition among higher education institutions to recruit the best and brightest students has been heating up increasingly. In this section, we present the outline of recent trend of internationalization in higher education with reference to policy of the Ministry of Education, Culture, Sports, Science and Technology (MEXT) .

  2. The Experience of Servant Leaders Who Work in the Field of Corporate Information Technology: A Phenomenological Investigation

    Science.gov (United States)

    Wright, Greggory S.

    2013-01-01

    The field of IT is a service-based field where professionals help others with technical, computer-related issues by supporting organizational goals. Therefore, the field of IT, even unknowingly, practices parts or all aspects of servant leadership. Little research is published on servant leadership models and practices within the field of…

  3. Evaluation of MRI-US Fusion Technology in Sports-Related Musculoskeletal Injuries.

    Science.gov (United States)

    Wong-On, Manuel; Til-Pérez, Lluís; Balius, Ramón

    2015-06-01

    A combination of magnetic resonance imaging (MRI) with real-time high-resolution ultrasound (US) known as fusion imaging may improve visualization of musculoskeletal (MSK) sports medicine injuries. The aim of this study was to evaluate the applicability of MRI-US fusion technology in MSK sports medicine. This study was conducted by the medical services of the FC Barcelona. The participants included volunteers and referred athletes with symptomatic and asymptomatic MSK injuries. All cases underwent MRI which was loaded into the US system for manual registration on the live US image and fusion imaging examination. After every test, an evaluation form was completed in terms of advantages, disadvantages, and anatomic fusion landmarks. From November 2014 to March 2015, we evaluated 20 subjects who underwent fusion imaging, 5 non-injured volunteers and 15 injured athletes, 11 symptomatic and 4 asymptomatic, age range 16-50 years, mean 22. We describe some of the anatomic landmarks used to guide fusion in different regions. This technology allowed us to examine muscle and tendon injuries simultaneously in US and MRI, and the correlation of both techniques, especially low-grade muscular injuries. This has also helped compensate for the limited field of view with US. It improves spatial orientation of cartilage, labrum and meniscal injuries. However, a high-quality MRI image is essential in achieving an adequate fusion image, and 3D sequences need to be added in MRI protocols to improve navigation. The combination of real-time MRI and US image fusion and navigation is relatively easy to perform and is helping to improve understanding of MSK injuries. However, it requires specific skills in MSK imaging and still needs further research in sports-related injuries. Toshiba Medical Systems Corporation.

  4. Natural language processing-based COTS software and related technologies survey.

    Energy Technology Data Exchange (ETDEWEB)

    Stickland, Michael G.; Conrad, Gregory N.; Eaton, Shelley M.

    2003-09-01

    Natural language processing-based knowledge management software, traditionally developed for security organizations, is now becoming commercially available. An informal survey was conducted to discover and examine current NLP and related technologies and potential applications for information retrieval, information extraction, summarization, categorization, terminology management, link analysis, and visualization for possible implementation at Sandia National Laboratories. This report documents our current understanding of the technologies, lists software vendors and their products, and identifies potential applications of these technologies.

  5. In-Situ MVA of CO2 Sequestration Using Smart Field Technology

    Energy Technology Data Exchange (ETDEWEB)

    Mohaghegh, Shahab D. [West Virginia Univ. Research Corporation, Morgantown, WV (United States)

    2014-09-01

    Capability of underground carbon dioxide storage to confine and sustain injected CO2 for a long period of time is the main concern for geologic CO2 sequestration. If a leakage from a geological CO2 sequestration site occurs, it is crucial to find the approximate amount and the location of the leak, in a timely manner, in order to implement proper remediation activities. An overwhelming majority of research and development for storage site monitoring has been concentrated on atmospheric, surface or near surface monitoring of the sequestered CO2 . This study aims to monitor the integrity of CO2 storage at the reservoir level. This work proposes developing in-situ CO2 Monitoring and Verification technology based on the implementation of Permanent Down-hole Gauges (PDG) or “Smart Wells” along with Artificial Intelligence and Data Mining (AI&DM). The technology attempts to identify the characteristics of the CO2 leakage by de-convolving the pressure signals collected from Permanent Down-hole Gauges (PDG). Citronelle field, a saline aquifer reservoir, located in the U.S. was considered as the basis for this study. A reservoir simulation model for CO2 sequestration in the Citronelle field was developed and history matched. PDGs were installed, and therefore were considered in the numerical model, at the injection well and an observation well. Upon completion of the history matching process, high frequency pressure data from PDGs were generated using the history matched numerical model using different CO2 leakage scenarios. Since pressure signal behaviors were too complicated to de-convolute using any existing mathematical formulations, a Machine Learning-based technology was introduced for this purpose. An Intelligent Leakage Detection System (ILDS) was developed as the result of this effort using the machine learning and pattern recognition technologies. The ILDS

  6. Short Cuts and Extended Techniques: Rethinking Relations between Technology and Educational Theory

    Science.gov (United States)

    Thumlert, Kurt; de Castell, Suzanne; Jenson, Jennifer

    2015-01-01

    Building upon a recent call to renew actor-network theory (ANT) for educational research, this article reconsiders relations between technology and educational theory. Taking cues from actor-network theorists, this discussion considers the technologically-mediated networks in which learning actors are situated, acted upon, and acting, and traces…

  7. Technology Related Expectations of Turkish as a Second Language Learners at Hacettepe University

    Science.gov (United States)

    Kalfa, Mahir; Yalcin, Haydar

    2013-01-01

    Aside from "lingua franca" of the current age, technology enhanced language learning is still in its infancy for the less commonly taught languages. Hacettepe TOMER has been teaching Turkish as a foreign/second language to the exchange students for several years though; technology related expectations of the language learners have never…

  8. Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

    DEFF Research Database (Denmark)

    Ferrari, Andrea C.; Bonaccorso, Francesco; Falko, Vladimir

    2015-01-01

    We present the science and technology roadmap (STR) for graphene, related twodimensional (2d) crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. The roadmap was developed within the framework of the Euro...

  9. 48 CFR 952.223 - Clauses related to environment, energy and water efficiency, renewable energy technologies...

    Science.gov (United States)

    2010-10-01

    ... environment, energy and water efficiency, renewable energy technologies, occupational safety, and drug-free workplace. 952.223 Section 952.223 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CLAUSES AND... related to environment, energy and water efficiency, renewable energy technologies, occupational safety...

  10. Bibliography: Sandia Laboratories hybrid microcircuit and related thin film technology (revised)

    International Nuclear Information System (INIS)

    Oswalt, J.A.

    1975-12-01

    Sandia originated documents (94) describing aspects of technology development related to hybrid microcircuits and thin films are summarized. Authors, titles, and abstracts are given for each unclassified document. The papers are categorized according to the various technologies involved in hybrid microcircuit production

  11. Unidirectional coating technology for organic field-effect transistors: materials and methods

    Science.gov (United States)

    Sun, Huabin; Wang, Qijing; Qian, Jun; Yin, Yao; Shi, Yi; Li, Yun

    2015-05-01

    Solution-processed organic field-effect transistors (OFETs) are essential for developing organic electronics. The encouraging development in solution-processed OFETs has attracted research interest because of their potential in low-cost devices with performance comparable to polycrystalline-silicon-based transistors. In recent years, unidirectional coating technology, featuring thin-film coating along only one direction and involving specific materials as well as solution-assisted fabrication methods, has attracted intensive interest. Transistors with organic semiconductor layers, which are deposited via unidirectional coating methods, have achieved high performance. In particular, carrier mobility has been greatly enhanced to values much higher than 10 cm2 V-1 s-1. Such significant improvement is mainly attributed to better control in morphology and molecular packing arrangement of organic thin film. In this review, typical materials that are being used in OFETs are discussed, and demonstrations of unidirectional coating methods are surveyed.

  12. Structural properties of porous materials and powders used in different fields of science and technology

    CERN Document Server

    Volfkovich, Yury Mironovich; Bagotsky, Vladimir Sergeevich

    2014-01-01

    This book provides a comprehensive and concise description of most important aspects of experimental and theoretical investigations of porous materials and powders, with the use and application of these materials in different fields of science, technology, national economy and environment. It allows the reader to understand the basic regularities of heat and mass transfer and adsorption occurring in qualitatively different porous materials and products, and allows the reader to optimize the functional properties of porous and powdered products and materials. Written in an straightforward and transparent manner, this book is accessible to both experts and those without specialist knowledge, and it is further elucidated by drawings, schemes and photographs. Porous materials and powders with different pore sizes are used in many areas of industry, geology, agriculture and science. These areas include (i) a variety of devices and supplies; (ii) thermal insulation and building materials; (iii) oil-bearing geologic...

  13. MOBILE TECHNOLOGY AIDED FIELD SALES PROCESS MANAGEMENT WIYH DYNAMICS ANYWHERE FOR MICROSOFT DYNAMIC NAV

    Directory of Open Access Journals (Sweden)

    Simon Sándor

    2013-03-01

    Full Text Available The evolution of information society, globalisation, made great changes concerning the human-computer relationship. Mobile technology gives new perspectives for the administration of enterprises and decision making. Microsoft Dynamics NAV is not only a software capable to model the various activities of a firm through the desktop platform, but with a properly developed user interface which is optimised for a mobile device, the possibilities of the use of this ERP software can be broadened with workflows characterised with great distances. In this study I show how a field sales workflow can be modelled and managed by me with the software environment “NAV Anywhere Framework”. The survey gives a closer look at both a suggestible administrative process for an imagined workflow and its technical management on a mobile device. For my development creates specialised and dynamic web pages for a mobile device, it can be accessible from a lot of types of smart phones and tablet computers.

  14. Relations between focusing power of space-charge lenses and external electromagnetic fields

    International Nuclear Information System (INIS)

    Yu Qingchang; Qiu Hong; Huang Jiachang

    1991-01-01

    Under different external electromagnetic fields, the electron densities of the electron cloud in a self-sustaning spece-charge lens are measured with the radio-frequency method and the energy distributions of the ions produced in ionization are measured with the stopping field method. From them the relations between the focusing power of space-charge lenses and the external electromagnetic fields are determined. The available region of the Lebedev-Morozov formula is discussed

  15. Atom probe field ion microscopy and related topics: A bibliography 1989

    Energy Technology Data Exchange (ETDEWEB)

    Miller, M.K.; Hawkins, A.R.; Russell, K.F.

    1990-12-01

    This bibliography includes references related to the following topics: atom probe field ion microscopy (APFIM), field ion spectroscopy (FIM), field emission microscopy (FEM), liquid metal ion sources (LMIS), scanning tunneling microscopy (STM), and theory. Technique-orientated studies and applications are included. This bibliography covers the period 1989. The references contained in this document were compiled from a variety of sources including computer searches and personal lists of publications.

  16. Atom probe field-ion microscopy and related topics: A bibliography, 1988

    Energy Technology Data Exchange (ETDEWEB)

    Miller, M.K.; Hawkins, A.R.

    1989-10-01

    This bibliography includes references related to the following topics: field-ion microscopy (FIM), field emission microscopy (FEM), atom probe field-ion microscopy (APFIM), and liquid metal ion sources (LMIS). Technique-orientated studies and applications are included. The references contained in this document were compiled from a variety of sources including computer searches and personal lists of publications. To reduce the length of this document, the references have been reduced to the minimum necessary to locate the articles.

  17. The Growth of Hydrological Understanding: Technologies, Ideas, and Societal Needs Shape the Field

    Science.gov (United States)

    Sivapalan, Murugesu; Blöschl, Günter

    2017-10-01

    Inspired by the work of Newton, Darwin, and Wegener, this paper tracks the drivers and dynamics that have shaped the growth of hydrological understanding over the last century. On the basis of an interpretation of this history, the paper then speculates about what kind of future is in store for hydrology and how we can better prepare for it. The historical narrative underpinning this analysis indicates that progress in hydrological understanding is brought about by changing societal needs and technological opportunities: new ideas are generated by hydrologists through addressing societal needs with the technologies of their time. We suggest that progress in hydrological understanding over the last century has expressed itself through repeated cycles of euphoria and disenchantment, which have served as stimuli for the progress. The progress, for it to happen, also needed inspirational leaders as well as a supportive scientific community that provided the backdrop to major advances in the field. The paper concludes that, in a similar way to how Newton, Darwin, and Wegener conducted their research, hydrology too can benefit from synthesis activities aimed at "connecting the dots."

  18. Issues Related to Experience & Automated Agent Technology in Synthetic Task Performance

    National Research Council Canada - National Science Library

    Coovert, Michael D; Riddle, Dawn L; Gordon, Thomas; Miles, Donald; Hoffman, Kimberly; King, Thomas; Elliott, Linda; Dalrymple, Mathieu; Schiflett, Samual; Chaiken, Scott

    2001-01-01

    .... Elliott, Stoyen and Chaiken (2000) note the limits of human cognitive processing relative to this demand and suggest agent technology has the potential to offer effective information and decision support the human operator...

  19. Relating drilling parameters at the bit-rock interface: theoretical and field studies

    Energy Technology Data Exchange (ETDEWEB)

    Sinkala, T. (Luleaa University of Technology, Luleaa (Sweden). Division of Mining Equipment Engineering)

    1991-01-01

    An explicit expression relating drilling parameters at the bit-rock contact is derived. The expression estimates the minimum torque, related to bit-rock contact only, required to maintain constant bit rotation. Theoretical results from the developed bit-rock contact relation agree very satisfactorily with those obtained from field tests and other previous experience. 15 refs., 8 figs., 2 tabs.

  20. Field Measurements of Perceived Air Quality in the Test-Bed for Innovative Climate Conditioning Technologies

    DEFF Research Database (Denmark)

    Kolarik, Jakub; Toftum, Jørn; Kabrhel, Michal

    the potential influence of aforementioned technologies on the perceived air quality. Additionally, the effect of Demand Controlled Ventilation (DCV) on the perceived air quality was tested. Measurements comprised of the assessments of perceived air quality and objective measurements of operative temperature......, relative humidity and CO2 concentration. Results showed that the mean sensory pollution load in the tested offices was 0.09±0.02 olf/m2 (mean±SEM). This refers to a low-polluting building according to CEN Report CR 1752. The acceptability of the air quality was worst in unoccupied offices ventilated at 20...

  1. Topography of Power Relations in Slovak Preschool Sector Based on Bourdieu's Field Theory

    Science.gov (United States)

    Kašcák, Ondrej; Pupala, Branislav

    2017-01-01

    The article analyses the Slovak preschool education sector using Bourdieu's field theory. It describes stable and volatile points in the evolution of preschool education in terms of the power games occurring within the specific social field of power relations shaped during these games. It explores the groups of powerful players that represent the…

  2. The Emergence of the Field of Sustainability Science: Influences on Faculty Behavior Related to Sustainability Work

    Science.gov (United States)

    Carlson, Carla

    2017-01-01

    This study investigates sustainability science as an emerging scientific field and the role of faculty members at higher education institutions as drivers of change in sustainability-science-based research, teaching, and community engagement. Seven factors related to the transdisciplinary field of sustainability science are analyzed for their…

  3. Visualizing Special Relativity: The Field of An Electric Dipole Moving at Relativistic Speed

    Science.gov (United States)

    Smith, Glenn S.

    2011-01-01

    The electromagnetic field is determined for a time-varying electric dipole moving with a constant velocity that is parallel to its moment. Graphics are used to visualize this field in the rest frame of the dipole and in the laboratory frame when the dipole is moving at relativistic speed. Various phenomena from special relativity are clearly…

  4. On the possibility of a fourth test of general relativity in earth's gravitational field

    International Nuclear Information System (INIS)

    Zhang Yuan-zhong.

    1981-03-01

    In the paper the possibility for a fourth test of general relativity (i.e. relativistic time delay) in Earth's gravitational field is discussed. The effects of Earth's gravitational field on an interferometer and a resonant cavity are calculated by means of both two definitions of physical length. (author)

  5. Seasonal distribution of meadow birds in relation to in-field heterogeneity and management

    NARCIS (Netherlands)

    Verhulst, Jort; Kleijn, David; Loonen, Willem; Berendse, Frank; Smit, Christian

    Effectiveness of European initiatives to restore populations of meadow breeding waders is heavily debated. We studied field preference of meadow birds throughout the breeding season in four areas of over 100 ha each and related observed patterns of individual birds to in-field heterogeneity, sward

  6. Seasonal distribution of meadow birds in relation to in-field heterogeneity and management

    NARCIS (Netherlands)

    Verhulst, J.; Kleijn, D.; Loonen, W.; Berendse, F.; Smit, C.

    2011-01-01

    Effectiveness of European initiatives to restore populations of meadow breeding waders is heavily debated. We studied field preference of meadow birds throughout the breeding season in four areas of over 100 ha each and related observed patterns of individual birds to in-field heterogeneity, sward

  7. International Relations as a Field of Study in the Canadian System of Higher Education

    Science.gov (United States)

    Istomina, Kateryna

    2015-01-01

    The research presents an attempt to investigate the current state of international relations as a field of study in the context of higher education system in Canada. It contains a general overview of the field of study, focusing predominantly on the role and function of the given academic discipline. The scientific investigation covers the issue…

  8. Participation in Science and Technology: Young People's Achievement-Related Choices in Late-Modern Societies

    Science.gov (United States)

    Boe, Maria Vetleseter; Henriksen, Ellen Karoline; Lyons, Terry; Schreiner, Camilla

    2011-01-01

    Young people's participation in science, technology, engineering and mathematics (STEM) is a matter of international concern. Studies and careers that require physical sciences and advanced mathematics are most affected by the problem and women in particular are under-represented in many STEM fields. This article views international research about…

  9. Assisted reproductive technology (ART) treatment in women with schizophrenia or related psychotic disorder

    DEFF Research Database (Denmark)

    Ebdrup, Ninna H; Assens, Maria; Hougaard, Charlotte O

    2014-01-01

    To determine the prevalence rate of women with a diagnosis of schizophrenia or related psychotic disorder in assisted reproductive technology (ART) treatment and to study these women's fertility treatment outcome in comparison to women with no psychotic disorders.......To determine the prevalence rate of women with a diagnosis of schizophrenia or related psychotic disorder in assisted reproductive technology (ART) treatment and to study these women's fertility treatment outcome in comparison to women with no psychotic disorders....

  10. Patterning technology for solution-processed organic crystal field-effect transistors

    Science.gov (United States)

    Li, Yun; Sun, Huabin; Shi, Yi; Tsukagoshi, Kazuhito

    2014-01-01

    Organic field-effect transistors (OFETs) are fundamental building blocks for various state-of-the-art electronic devices. Solution-processed organic crystals are appreciable materials for these applications because they facilitate large-scale, low-cost fabrication of devices with high performance. Patterning organic crystal transistors into well-defined geometric features is necessary to develop these crystals into practical semiconductors. This review provides an update on recentdevelopment in patterning technology for solution-processed organic crystals and their applications in field-effect transistors. Typical demonstrations are discussed and examined. In particular, our latest research progress on the spin-coating technique from mixture solutions is presented as a promising method to efficiently produce large organic semiconducting crystals on various substrates for high-performance OFETs. This solution-based process also has other excellent advantages, such as phase separation for self-assembled interfaces via one-step spin-coating, self-flattening of rough interfaces, and in situ purification that eliminates the impurity influences. Furthermore, recommendations for future perspectives are presented, and key issues for further development are discussed. PMID:27877656

  11. Patterning technology for solution-processed organic crystal field-effect transistors

    Directory of Open Access Journals (Sweden)

    Yun Li

    2014-04-01

    Full Text Available Organic field-effect transistors (OFETs are fundamental building blocks for various state-of-the-art electronic devices. Solution-processed organic crystals are appreciable materials for these applications because they facilitate large-scale, low-cost fabrication of devices with high performance. Patterning organic crystal transistors into well-defined geometric features is necessary to develop these crystals into practical semiconductors. This review provides an update on recent development in patterning technology for solution-processed organic crystals and their applications in field-effect transistors. Typical demonstrations are discussed and examined. In particular, our latest research progress on the spin-coating technique from mixture solutions is presented as a promising method to efficiently produce large organic semiconducting crystals on various substrates for high-performance OFETs. This solution-based process also has other excellent advantages, such as phase separation for self-assembled interfaces via one-step spin-coating, self-flattening of rough interfaces, and in situ purification that eliminates the impurity influences. Furthermore, recommendations for future perspectives are presented, and key issues for further development are discussed.

  12. Trial of Engineer Educating of Manufacturing Field in Kagoshima National College of Technology

    Science.gov (United States)

    Nakamura, Itaru; Hombu, Mitsuyuki; Kusuhara, Yoshito; Kashine, Kenji; Sakasegawa, Eiichi; Tashima, Daisuke; Fukidome, Hiromi

    In Kagoshima National College of Technology, based on investigation with “the job boost measure investigation work in a power supply area” undertaken in the 2005 fiscal year, we accepted the trust from Kyushu Bureau of Economy, Trade and Industry, and undertook “the small-and-medium-sized-enterprises personnel educating work which utilized the technical college etc.” for three years from the 2006 fiscal year to the 2008 fiscal year. As the trial of engineer educating according to the electrical engineering concept to the manufacturing field based on a conventional result, we act as a professor of the base technique for applying alternative energy (a fuel cell and a solar cell) in which social needs are powerful these days, and aim at aiming at cultivation of the problem-solving type engineer who can contribute to a low carbon society through manufacturing, we undertook this work according to the manufacturing bearer educating work (personnel educating and secured work of the manufacturing field) in the 2009 fiscal year of National Federation of Small Business Associations.

  13. Technology-Enhanced Science: Using an Online Blog to Share a Collaborative Field Study for Research and Education

    Science.gov (United States)

    Mccann, A. R.; Cardace, D.; Carnevale, D.

    2011-12-01

    The role of technology is an increasingly important resource in preparing students for the future. The Internet is a widely accessible tool. Technology has also made us more connected, allowing constant communication and instantaneous data sharing. Public utilities such as those found on the web, including blogs, are a means to convey scientific research in rapid, useful ways. This tool is ideal for newly emerging fields, allowing up-to-date collaboration and referencing of ongoing studies, as well as bringing students virtually into the field or laboratory through videos, pictures, and records of project work. Astrobiology is a high interest topic, integrating geology, chemistry, biology, and physics. Terrestrial Mars analog environments are compelling in that they shed light on unusual opportunities for diverse life in settings beyond Earth. For this study, the analog site locality is at the University of California-Davis McLaughlin Natural Reserve in the Coast Range Ophiolite, a portion of actively serpentinizing, uplifted oceanic material in northern California (see companion poster, McCann et al., Mineralogy of Surface Serpentinite Outcrops in the Coast Range Ophiolite: Implications for the Deep Biosphere and Astrobiology). Our research objective is to monitor the activity taking place within the subsurface biosphere through an interdisciplinary approach involving biogeochemists, microbiologists, organic geochemists, and geologists. The study of serpentinization with astrobiological ground-truthing is a relatively new and promising field. Scientific field procedures are constantly being modified as they are applied. In order to better collaborate study efforts, a daily field journal is being written, recording ideas, discussions, procedures, problems, solutions, and results. It serves as an informal report, including pictures and video clips of the field activity. The journal is maintained as an online blog for ease of use and accessibility, as well as public

  14. NASA Activities as they Relate to Microwave Technology for Aerospace Communications Systems

    Science.gov (United States)

    Miranda, Felix A.

    2011-01-01

    This presentation discusses current NASA activities and plans as they relate to microwave technology for aerospace communications. The presentations discusses some examples of the aforementioned technology within the context of the existing and future communications architectures and technology development roadmaps. Examples of the evolution of key technology from idea to deployment are provided as well as the challenges that lay ahead regarding advancing microwave technology to ensure that future NASA missions are not constrained by lack of communication or navigation capabilities. The presentation closes with some examples of emerging ongoing opportunities for establishing collaborative efforts between NASA, Industry, and Academia to encourage the development, demonstration and insertion of communications technology in pertinent aerospace systems.

  15. Research and technology strategy to help overcome the environmental problems in relation to transport

    International Nuclear Information System (INIS)

    Gwilliam, K.M.; Geerlings, H.

    1992-04-01

    This report has been prepared for the Strategic Analysis in Science and Technology Unit (SAST) of the Directorate-General for Science, Research and Development of the Commission of the European Communities. The background of the project to which this report contributes is a recognition of the growing impact of transportation on the environment, both as a function of growth in trade and as a leisure activity. The project is directed towards the elucidation of the many interactions between technology, transport and environment, in order to provide the Commission with (a) recommendations on the priorities for Community research and development in transport technology and other related areas of technology, and (b) an understanding of the implications of technological change on policy options, within the Community with regard to transport and environment and other related areas, such as energy and regional planning

  16. Energy Smart Schools--Applied Research, Field Testing, and Technology Integration

    Energy Technology Data Exchange (ETDEWEB)

    Nebiat Solomon; Robin Vieira; William L. Manz; Abby Vogen; Claudia Orlando; Kimberlie A. Schryer

    2004-12-01

    The National Association of State Energy Officials (NASEO) in conjunction with the California Energy Commission, the Energy Center of Wisconsin, the Florida Solar Energy Center, the New York State Energy Research and Development Authority, and the Ohio Department of Development's Office of Energy Efficiency conducted a four-year, cost-share project with the U.S. Department of Energy (USDOE), Office of Energy Efficiency and Renewable Energy to focus on energy efficiency and high-performance technologies in our nation's schools. NASEO was the program lead for the MOU-State Schools Working group, established in conjunction with the USDOE Memorandum of Understanding process for collaboration among state and federal energy research and demonstration offices and organizations. The MOU-State Schools Working Group included State Energy Offices and other state energy research organizations from all regions of the country. Through surveys and analyses, the Working Group determined the school-related energy priorities of the states and established a set of tasks to be accomplished, including the installation and evaluation of microturbines, advanced daylighting research, testing of schools and classrooms, and integrated school building technologies. The Energy Smart Schools project resulted in the adoption of advanced energy efficiency technologies in both the renovation of existing schools and building of new ones; the education of school administrators, architects, engineers, and manufacturers nationwide about the energy-saving, economic, and environmental benefits of energy efficiency technologies; and improved the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in classrooms. It also provided an opportunity for states to share and replicate successful projects to increase their energy efficiency while at the same time driving down their energy costs.

  17. User acceptance factors of hospital information systems and related technologies: Systematic review.

    Science.gov (United States)

    Handayani, Putu Wuri; Hidayanto, Achmad Nizar; Budi, Indra

    2017-08-22

    This study reviews the literature on the most important acceptance factors associated with Hospital Information Systems (HIS) and related technologies based on user groups' perspectives (medical staff, hospital management, administrative personnel, patient, medical student, and IT staff), which can assist researchers and hospital management to develop suitable acceptance models to improve the quality of HIS. We conducted searches in online databases with large repositories of academic studies, written in English and fully accessible by the authors. The articles being reviewed are related to health information technology (HIT), clinical information systems (CIS), HIS, electronic medical records (EMR), telemedicine or telehealth, picture archiving and communication systems (PACS), radio frequency identification (RFID), and computerized physician order entry (CPOE), where the use of most of those applications and technologies is highly integrated. A predefined string was used to extract 1,005 articles, and the results were reviewed and checked. The results of this study found 15 user acceptance factors related to HIS and related technologies that were frequently identified by a minimum of five previous studies. These factors were related to individual, technological, and organizational factors. In addition, HIS and related technologies' user acceptance factors in each user group describe different results.

  18. Social Relations of Science and Technology: perceptions of teachers of technical training, PARFOR course participants

    Directory of Open Access Journals (Sweden)

    Manuella Candéo

    2014-12-01

    Full Text Available We present in this paper a study on the perceptions of teachers of technical training, course participants (PARFOR National Plan for Training Teachers of Basic Education , offered by the Federal Technological University of Paraná, Campus Ponta Grossa (PG - UTFPR on the social relations of science and technology. The study conducted with 15 teachers from various disciplines. The methodological approach was quantitative research , the instrument of data collection was based questionnaire with open questions . The main results show that the vast majority of teachers had a very narrow view about science and technology , consider that the scientific and technological development always bring benefits to its own population of traditional / classic , positivist view. The need to promote reflection on social issues of science and technology in education technology in order to train professionals aware of their responsibilities as citizens in a highly technological age was observed. It is emphasized that these are recorded in the master's thesis entitled Scientific and Technological Literacy (ACT by Focus Science, Technology and Society (STS from commercial films of the University Program Graduate School of Science and Technology Tecnológica Federal do Paraná ( UTFPR Campus Ponta Grossa, Brazil.

  19. Relating to fossil energy resource characterization, research, technology development, and technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Poston, S.W.; Berg, R.R.; Friedman, M.M.; Gangi, A.F.; Wu, C.H.

    1993-12-01

    Geological, geophysical and petroleum engineering aspects of oil recovery from low-permeability reservoirs have been studied over the past three years. Significant advances were made in using Formation Microscanner Surveys (FMS) data to extrapolate fracture orientation, abundance, and spacing from the outcrop to the subsurface. Highly fractured zones within the reservoir can be detected, thus the fracture stratigraphy defined. Multi-component,vertical-seismic profile (VSP), shear wave data were used to improve the detection of fractures. A balancing scheme was developed to improve the geophysical detection of fractures based on balanced source magnitudes and geophone couplings. Resistivity logs can be used to identify the zone of immature organic material, the zone of storage where oil is generated but held in the matrix and the zone of migration whee oil is expelled from the rock to fractures. Natural fractures can be detected in many wells by the response of density logs in combination with gamma-ray, resistivity, and sonic logs. Theoretical studies and analysis of daily production data, from field case histories, have shown the utility of the Chef Type Curves to derive reservoir character from production test data. This information is ordinarily determined from transient pressure data. Laboratory displacement as well as MI and CT studies show that the carbonated water imbibition oil displacement process significantly accelerates and increases recovery from saturated, low-permeability core material. The created gas drive, combined with oil shrinkage significantly increased oil recovery. A cyclic-carbonated-water-imbibition process improves oil recovery. A semi-analytical model (MOD) and a 3-dimensional, 3-phase, dual-porosity, compositional simulator (COMAS) were developed to describe the imbibition carbonated waterflood performance. MOD model is capable of computing the oil recovery and saturation profiles for oil/water viscosity ratios other than one.

  20. Atom probe field ion microscopy and related topics: A bibliography 1990

    Energy Technology Data Exchange (ETDEWEB)

    Russell, K.F.; Miller, M.K.

    1991-12-01

    This bibliography includes references related to the following topics: atom probe field ion microscopy (APFIM), field ion microscopy (FIM), field emission (FE), ion sources, and field desorption mass microscopy (FDMM). Technique-orientated studies and applications are included. The bibliography covers the period 1990. The references contained in this document were compiled from a variety of sources including computer searches and personal lists of publications. To reduce the length of this document, the references have been reduced to the minimum necessary to locate the articles. The references, listed alphabetically by authors, are subdivided into the categories listed in paragraph one above. An Addendum of references missed in previous bibliographies is included.

  1. Scientific and technological monitoring: international overview on R. and D. related to Pra's

    International Nuclear Information System (INIS)

    Llory, M.; Stioui, A.

    1993-03-01

    In 1989, the R and D Division of Electricite de France launched a programme for a Technological and Scientific Overview (TSO) covering a certain number of topics considered to be important for the future of EDF. Probabilistic approaches to studies related to safety were considered to be strategically important to EDF, and therefore this area was selected for further study. A TSO is a process which can only start on the basis of a structured state-of-the-art organized as a basis of knowledge, together with the highlighting of a certain number of scientific and strategic ''set of references . The state-of-the-art of R and D related to Probabilistic Safety Assessment (PSA) was carried out in collaboration between the EDF R and D Division (SR branch) and SRI International. The approach chosen included: segmentation of the wide field of PSAs into subject areas, topics and sensitive points to be monitored; conception of a grid for the interviews; approximately thirty in-depth interviews of organizations and experts representative of the domain; analysis leading to identify certain problems areas or particularly important features. Emerging themes for research and further consideration in relation to PSAs, their application and their limits were also identified. Based on this state-of-the-art, various themes of monitoring were defined (living PSAs, limits of PSAs,...) and an organizational structure for monitoring was set up in the branch. The state of the art is not static, it is the reason why an in-depth extension of the study was undertaken on issues of special interest for EDF. (authors). 2 figs., 2 refs

  2. Quantum fields on manifolds: an interplay between quantum theory, statistical thermodynamics and general relativity

    International Nuclear Information System (INIS)

    Sewell, G.L.

    1986-01-01

    The author shows how the basic axioms of quantum field theory, general relativity and statistical thermodynamics lead, in a model-independent way, to a generalized Hawking-Unruh effect, whereby the gravitational fields carried by a class of space-time manifolds with event horizons thermalize ambient quantum fields. The author is concerned with a quantum field on a space-time x containing a submanifold X' bounded by event horizons. The objective is to show that, for a wide class of space-times, the global vacuum state of the field reduces, in X', to a thermal state, whose temperature depends on the geometry. The statistical thermodynaical, geometrical, and quantum field theoretical essential ingredients for the reduction of the vacuum state are discussed

  3. Testing the Abbreviated Food Technology Neophobia Scale and its relation to satisfaction with food-related life in university students.

    Science.gov (United States)

    Schnettler, Berta; Grunert, Klaus G; Miranda-Zapata, Edgardo; Orellana, Ligia; Sepúlveda, José; Lobos, Germán; Hueche, Clementina; Höger, Yesli

    2017-06-01

    The aims of this study were to test the relationships between food neophobia, satisfaction with food-related life and food technology neophobia, distinguishing consumer segments according to these variables and characterizing them according to willingness to purchase food produced with novel technologies. A survey was conducted with 372 university students (mean aged=20.4years, SD=2.4). The questionnaire included the Abbreviated version of the Food Technology Neophobia Scale (AFTNS), Satisfaction with Life Scale (SWLS), and a 6-item version of the Food Neophobia Scale (FNS). Using confirmatory factor analysis, it was confirmed that SWFL correlated inversely with FNS, whereas FNS correlated inversely with AFTNS. No relationship was found between SWFL and AFTNS. Two main segments were identified using cluster analysis; these segments differed according to gender and family size. Group 1 (57.8%) possessed higher AFTNS and FNS scores than Group 2 (28.5%). However, these groups did not differ in their SWFL scores. Group 1 was less willing to purchase foods produced with new technologies than Group 2. The AFTNS and the 6-item version of the FNS are suitable instruments to measure acceptance of foods produced using new technologies in South American developing countries. The AFTNS constitutes a parsimonious alternative for the international study of food technology neophobia. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Collaborative Technology Assessments Of Transient Field Processing And Additive Manufacturing Technologies As Applied To Gas Turbine Components

    Energy Technology Data Exchange (ETDEWEB)

    Ludtka, Gerard Michael [ORNL; Dehoff, Ryan R [ORNL; Szabo, Attila [General Electric (GE) Power and Water; Ucok, Ibrahim [General Electric (GE) Power and Water

    2016-01-01

    ORNL partnered with GE Power & Water to investigate the effect of thermomagnetic processing on the microstructure and mechanical properties of GE Power & Water newly developed wrought Ni-Fe-Cr alloys. Exploration of the effects of high magnetic field process during heat treatment of the alloys indicated conditions where applications of magnetic fields yields significant property improvements. The alloy aged using high magnetic field processing exhibited 3 HRC higher hardness compared to the conventionally-aged alloy. The alloy annealed at 1785 F using high magnetic field processing demonstrated an average creep life 2.5 times longer than that of the conventionally heat-treated alloy. Preliminary results show that high magnetic field processing can improve the mechanical properties of Ni-Fe-Cr alloys and potentially extend the life cycle of the gas turbine components such as nozzles leading to significant energy savings.

  5. Accuracy and Adoption of Wearable Technology Used by Active Citizens: A Marathon Event Field Study.

    Science.gov (United States)

    Pobiruchin, Monika; Suleder, Julian; Zowalla, Richard; Wiesner, Martin

    2017-02-28

    Today, runners use wearable technology such as global positioning system (GPS)-enabled sport watches to track and optimize their training activities, for example, when participating in a road race event. For this purpose, an increasing amount of low-priced, consumer-oriented wearable devices are available. However, the variety of such devices is overwhelming. It is unclear which devices are used by active, healthy citizens and whether they can provide accurate tracking results in a diverse study population. No published literature has yet assessed the dissemination of wearable technology in such a cohort and related influencing factors. The aim of this study was 2-fold: (1) to determine the adoption of wearable technology by runners, especially "smart" devices and (2) to investigate on the accuracy of tracked distances as recorded by such devices. A pre-race survey was applied to assess which wearable technology was predominantly used by runners of different age, sex, and fitness level. A post-race survey was conducted to determine the accuracy of the devices that tracked the running course. Logistic regression analysis was used to investigate whether age, sex, fitness level, or track distance were influencing factors. Recorded distances of different device categories were tested with a 2-sample t test against each other. A total of 898 pre-race and 262 post-race surveys were completed. Most of the participants (approximately 75%) used wearable technology for training optimization and distance recording. Females (P=.02) and runners in higher age groups (50-59 years: P=.03; 60-69 years: P<.001; 70-79 year: P=.004) were less likely to use wearables. The mean of the track distances recorded by mobile phones with combined app (mean absolute error, MAE=0.35 km) and GPS-enabled sport watches (MAE=0.12 km) was significantly different (P=.002) for the half-marathon event. A great variety of vendors (n=36) and devices (n=156) were identified. Under real-world conditions

  6. Advances in cellular technology in the hematology field: What have we learned so far?

    Science.gov (United States)

    de Souza, Gustavo Torres; Maranduba, Claudinéia Pereira; de Souza, Camila Maurmann; do Amaral, Danielle Luciana Aurora Soares; da Guia, Francisco Carlos; Zanette, Rafaella de Souza Salomão; Rettore, João Vitor Paes; Rabelo, Natana Chaves; Nascimento, Lucas Mendes; Pinto, Ícaro França Navarro; Farani, Júlia Boechat; Neto, Abrahão Elias Hallack; Silva, Fernando de Sá; Maranduba, Carlos Magno da Costa; Atalla, Angelo

    2015-01-26

    Despite the advances in the hematology field, blood transfusion-related iatrogenesis is still a major issue to be considered during such procedures due to blood antigenic incompatibility. This places pluripotent stem cells as a possible ally in the production of more suitable blood products. The present review article aims to provide a comprehensive summary of the state-of-the-art concerning the differentiation of both embryonic stem cells and induced pluripotent stem cells to hematopoietic cell lines. Here, we review the most recently published protocols to achieve the production of blood cells for future application in hemotherapy, cancer therapy and basic research.

  7. Applications of EOR (enhanced oil recovery) technology in field projects--1990 update

    Energy Technology Data Exchange (ETDEWEB)

    Pautz, J.F.; Thomas, R.D.

    1991-01-01

    Trends in the type and number of US enhanced oil recovery (EOR) projects are analyzed for the period from 1980 through 1989. The analysis is based on current literature and news media and the Department of Energy (DOE) EOR Project Data Base, which contains information on over 1,348 projects. The characteristics of the EOR projects are grouped by starting date and process type to identify trends in reservoir statistics and applications of process technologies. Twenty-two EOR projects starts were identified for 1989 and ten project starts for 1988. An obvious trend over recent years has been the decline in the number of project starts since 1981 until 1988 which corresponds to the oil price decline during that period. There was a modest recovery in 1989 of project starts, which lags the modest recovery of oil prices in 1987 that was reconfirmed in 1989. During the time frame of 1980 to 1989, there has been a gradual improvement in costs of operation for EOR technology. The perceived average cost of EOR has gone down from a $30/bbl range to low $20/bbl. These costs of operation seems to stay just at the price of oil or slightly above to result in marginal profitability. The use of polymer flooding has drastically decreased both in actual and relative numbers of project starts since the oil price drop in 1986. Production from polymer flooding is down more than 50%. Long-term plans for large, high-cost projects such as CO{sub 2} flooding in West Texas, steamflooding in California, and hydrocarbon flooding on the North Slope have continued to be implemented. EOR process technologies have been refined to be more cost effective as shown by the continued application and rising production attributable to EOR. 8 refs., 6 figs., 13 tabs.

  8. Methodology to estimate the relative pressure field from noisy experimental velocity data

    International Nuclear Information System (INIS)

    Bolin, C D; Raguin, L G

    2008-01-01

    The determination of intravascular pressure fields is important to the characterization of cardiovascular pathology. We present a two-stage method that solves the inverse problem of estimating the relative pressure field from noisy velocity fields measured by phase contrast magnetic resonance imaging (PC-MRI) on an irregular domain with limited spatial resolution, and includes a filter for the experimental noise. For the pressure calculation, the Poisson pressure equation is solved by embedding the irregular flow domain into a regular domain. To lessen the propagation of the noise inherent to the velocity measurements, three filters - a median filter and two physics-based filters - are evaluated using a 2-D Couette flow. The two physics-based filters outperform the median filter for the estimation of the relative pressure field for realistic signal-to-noise ratios (SNR = 5 to 30). The most accurate pressure field results from a filter that applies in a least-squares sense three constraints simultaneously: consistency between measured and filtered velocity fields, divergence-free and additional smoothness conditions. This filter leads to a 5-fold gain in accuracy for the estimated relative pressure field compared to without noise filtering, in conditions consistent with PC-MRI of the carotid artery: SNR = 5, 20 x 20 discretized flow domain (25 X 25 computational domain).

  9. On the electromagnetic field and the Teukolsky relations in arbitrary space-times

    International Nuclear Information System (INIS)

    Coll, B.; Ferrando, J.J.

    1985-01-01

    The relations on the electromagnetic field obtained by Teukolsky for type D, vacuum space-times are studied. The role played by the maxwellian geometry of the basic tetrad is shown. It is proved that Teukolsky relations are, generically, incomplete. Once completed, their generalization to arbitrary space-times is given [fr

  10. Competence formation of engineering directions students in the field of energy saving as a way to create new generation technologies

    Science.gov (United States)

    Gilmanshin, I. R.; Gilmanshina, S. I.

    2017-09-01

    The urgency of the formation of competence in the field of energy saving in the process of studying engineering and technical disciplines at the university is substantiated. The author’s definition of the competence in the field of energy saving is given, allowing to consider the necessity of its formation among students - future engineers as a way to create technologies of a new generation. The essence of this competence is revealed. The system of work, pedagogical conditions and technologies of its formation in the conditions of the federal university is substantiated.

  11. DOE/LLNL verification symposium on technologies for monitoring nuclear tests related to weapons proliferation

    International Nuclear Information System (INIS)

    Nakanishi, K.K.

    1993-01-01

    The rapidly changing world situation has raised concerns regarding the proliferation of nuclear weapons and the ability to monitor a possible clandestine nuclear testing program. To address these issues, Lawrence Livermore National Laboratory's (LLNL) Treaty Verification Program sponsored a symposium funded by the US Department of Energy's (DOE) Office of Arms Control, Division of Systems and Technology. The DOE/LLNL Symposium on Technologies for Monitoring Nuclear Tests Related to Weapons Proliferation was held at the DOE's Nevada Operations Office in Las Vegas, May 6--7,1992. This volume is a collection of several papers presented at the symposium. Several experts in monitoring technology presented invited talks assessing the status of monitoring technology with emphasis on the deficient areas requiring more attention in the future. In addition, several speakers discussed proliferation monitoring technologies being developed by the DOE's weapons laboratories

  12. The International Science and Technology Center (ISTC) and ISTC projects related to nuclear safety. Information review

    International Nuclear Information System (INIS)

    Tocheny, Lev V.

    2003-01-01

    The ISTC is an intergovernmental organization created ten years ago by Russia, USA, EU and Japan in Moscow. The Center supports numerous science and technology projects in different areas, from biotechnologies and environmental problems to all aspects of nuclear studies, including those focused on the development of effective innovative concepts and technologies in the nuclear field, in general, and for improvement of nuclear safety, in particular. The presentation addresses some technical results of the ISTC projects as well as methods and approaches employed by the ISTC to foster close international collaboration and manage projects towards fruitful results. (author)

  13. EMR-related problems at the interface between the crystal field Hamiltonians and the zero-field splitting Hamiltonians

    Directory of Open Access Journals (Sweden)

    Rudowicz Czesław

    2015-07-01

    Full Text Available The interface between optical spectroscopy, electron magnetic resonance (EMR, and magnetism of transition ions forms the intricate web of interrelated notions. Major notions are the physical Hamiltonians, which include the crystal field (CF (or equivalently ligand field (LF Hamiltonians, and the effective spin Hamiltonians (SH, which include the zero-field splitting (ZFS Hamiltonians as well as to a certain extent also the notion of magnetic anisotropy (MA. Survey of recent literature has revealed that this interface, denoted CF (LF ↔ SH (ZFS, has become dangerously entangled over the years. The same notion is referred to by three names that are not synonymous: CF (LF, SH (ZFS, and MA. In view of the strong need for systematization of nomenclature aimed at bringing order to the multitude of different Hamiltonians and the associated quantities, we have embarked on this systematization. In this article, we do an overview of our efforts aimed at providing a deeper understanding of the major intricacies occurring at the CF (LF ↔ SH (ZFS interface with the focus on the EMR-related problems for transition ions.

  14. Geoscience-related research needs for geothermal energy technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Crane, C. H.; Markiewicz, J. J. Jr.

    1983-09-30

    A project to identify and prioritize geoscience-related research needs that would be of significant benefit in the assessment, exploration, and development of US geothermal energy resources is described. The federal research needs as identified by the Panel are summarized. The research needs are organized into specific research needs for four technology areas and a group of generic research needs which relate to all of the technology areas. Arranged in order of overall need for research, these technology areas are: reservoir engineering; resource exploration and reservoir definition; well drilling, completion, and stimulation; and environmental monitoring and control. The generic research needs are: geoscience case studies, scientific drilling, information and technology transfer, and improved research coordination. (MHR)

  15. Preparing students for higher education and careers in agriculture and related fields: An ethnography of an urban charter school

    Science.gov (United States)

    Henry, Kesha Atasha

    This study explored the preparation of students for higher education and careers in agriculturally-related fields at an urban charter high school. The data were collected through interviews, observations, and field notes. The data were analyzed by qualitative methodology with phenomenology as the theoretical framework. Findings indicated that administrators thought it was important to incorporate agricultural science courses into urban school curricula. They stated that agricultural science courses gave urban students a different way of looking at science and helped to enhance the science and technology focus of the school. Further, agricultural science courses helped to break urban students' stereotypes about agriculture and helped to bring in more state funding for educational programs. However they thought that it was more challenging to teach agricultural science in urban versus rural schools and they focused more on Science, Technology, Engineering, and Mathematics (STEM) related careers. The students had mixed views about higher education and careers in agriculture. This was based on their limited knowledge and stereotypes about agricultural majors and career options. The students highlighted several key reasons why they chose to enroll in agricultural science courses. This included the benefits of dual science credits and the ability to earn an associate degree upon successful completion of their program. Students also loved science and appreciated the science intensive nature of the agricultural courses. Additionally, they thought that the agricultural science courses were better than the other optional courses. The results also showed that electronic media such as radio and TV had a negative impact on students' perceptions about higher education and careers in agriculturally-related fields. Conclusions and recommendations are presented.

  16. CERN’s policy in the field of knowledge and technology transfer goes global

    CERN Multimedia

    CERN Bulletin

    On 2 November, the Knowledge & Technology Transfer (KTT) Group presented to the Directorate three proposals that aim to enhance KTT activities. One important aspect of the proposals is the direct involvement of all members of CERN, who are strongly encouraged to communicate any ideas for additional applications of their work. KTT is a high-priority activity area because of its potential to demonstrate the role of CERN as a source of innovation, delivering tangible benefits to society. In particular, through its know-how and its leadership, CERN is today generating innovations applicable in domains such as medical sciences, energy and the environment, as well as many others. “The measures endorsed by the Directorate on 2 November include a comprehensive policy for managing the intellectual property related to CERN technologies”, explains Claudio Parrinello, head of the KTT Group in the DG Department. “This includes a proposal to redistribute part of the income generated by ...

  17. Magnetic Field Sensors Based on Giant Magnetoresistance (GMR Technology: Applications in Electrical Current Sensing

    Directory of Open Access Journals (Sweden)

    Càndid Reig

    2009-10-01

    Full Text Available The 2007 Nobel Prize in Physics can be understood as a global recognition to the rapid development of the Giant Magnetoresistance (GMR, from both the physics and engineering points of view. Behind the utilization of GMR structures as read heads for massive storage magnetic hard disks, important applications as solid state magnetic sensors have emerged. Low cost, compatibility with standard CMOS technologies and high sensitivity are common advantages of these sensors. This way, they have been successfully applied in a lot different environments. In this work, we are trying to collect the Spanish contributions to the progress of the research related to the GMR based sensors covering, among other subjects, the applications, the sensor design, the modelling and the electronic interfaces, focusing on electrical current sensing applications.

  18. [Recent progress in NIR spectroscopy technology and its application to the field of forestry].

    Science.gov (United States)

    Gong, Yu-Mei; Zhang, Wei

    2008-07-01

    Near-Infrared Spectroscopy (NIRS) is the most rapidly developing and the most noticeable spectrographic technique in the 80's (the last century). Its developing history and utilization in foreign countries were introduced. The authors mainly summarized the applications of NIRS to the field of forestry. The applications of near-infrared reflectance spectroscopy (NIRS) in fruit quality, timber and seed quality analysis are more active in forestry due to its rapid, timely, less expensive, non-destructive, straightforward analytic characteristics. In the last two decades, non-destructive methods using near-infrared spectroscopy (NIRS) to evaluate parameters for estimating maturity were applied to different fruits species to check the ripening status of fruits on trees or to grade fruits in the packing house, to assess fruit quality, such as sugar and acid contents, soluble solids, firmness of fruit, offers great advantages to growers in deciding when to harvest. The near infrared spectrophotometry (NIRS) can also be used the nondestructive quantitative assessment of the solid wood density, the moisture condition and the lignin content in bulky wood. The previous results indicated that the utility of NIRS was a selection tool in breeding programs, for example, three kids of persimmon fruits, astringent, non-astringent and half-astringent, were clearly classified by using Near-infrared (NIR) methods, and based on the combination of near infrared technology and multivariate analysis, the genetic, physiological and technical qualities of both temperate and tropical tree species on single seed basis can be characterized. It has already been shown that NIRS can predict the chemical composition of litters. NIRS is also capable of correlating the initial spectral characteristics of the litters with their short- and medium-term decomposability. The stage of decay of decomposing leaves can be predicted by using the near infrared reflectance spectroscopy. The method is rich in

  19. Increasing heavy oil reserves in the Wilmington Oil Field through advanced reservoir characterization and thermal production technologies. Annual report, March 30, 1995--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    The objective of this project is to increase heavy oil reserves in a portion of the Wilmington Oil Field, near Long Beach, California, by implementing advanced reservoir characterization and thermal production technologies. Based on the knowledge and experience gained with this project, these technologies are intended to be extended to other sections of the Wilmington Oil Field, and, through technology transfer, will be available to increase heavy oil reserves in other slope and basin clastic (SBC) reservoirs. The project involves implementing thermal recovery in the southern half of the Fault Block II-A Tar zone. The existing steamflood in Fault Block II-A has been relatively inefficient due to several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery efficiency and reduce operating costs.

  20. Interpreting chemistry and technology of lime binders and implementing it in the conservation field

    Directory of Open Access Journals (Sweden)

    Georgia Zacharopoulou

    2009-01-01

    Full Text Available The objective of the paper is the compilation, review and dissemination of updated scientific knowledge on lime theory and technology in the field of heritage conservation. The strong evidence of the last decade's research on the positive effect of the - not demonstrable by a chemical equation – 'key' missing link of the maturation process is highlighted. It is demonstrated that the exceptional perfor -mance characteristics of durable lime based mortars predominately rely on the capacity for rapid, efficient and extensive carbonation of the air-hardening phase of limes, in particular when matured (nanoparticle wet slaked lime putties are used; and on the chemical and mechanical stability of the strength components (principally CSHs of the hydraulic phase of limes, which is higher in their more crystalline forms of historical lime-pozzolan mixtures than in their amorphous forms of modern cements. Hence, physicochemical adhesion and cohesion bonds both at the lime matrix and at the binder/aggregate interfaces are ensured imparting minimization of cracks and durability to lime based mortars and historic masonries. The comprehensive documentation of the former leads to optimal materials and procedures to preserve our cultural heritage.

  1. Current trends in ICE wear detection technologies: from lab to field

    Directory of Open Access Journals (Sweden)

    Guillermo Miro

    2017-01-01

    Full Text Available Research in internal combustion engine (ICE tribology has been an active topic during the last decades, driven by different interest: first, in order to improve thermodynamics and overall engine performance, while nowadays there is an interest in reducing engine losses, including friction, in order to cut down fuel consumption and also exhaust emissions. Tribology is a tri-vector science, where friction is the fundamental phenomena occurring between two surfaces, wear is the consequence of the occurrence of friction and lubrication is the solution for diminish friction and eliminate wear presence in the tribological system. During the development of ICE, different technologies and techniques have been applied for detection of ICE wear, focused in different parts of the engine life and also used for different purposes, including research or maintenance. In this work, a comprehensive look on this field is done, where several techniques are explained and their main application and pros and cons are highlighted. Reference Number: www.asrongo.org/doi:4.2017.2.1.32

  2. Emerging high technology fields and thoughts on reshaping the engineering curriculum.

    Energy Technology Data Exchange (ETDEWEB)

    Kuzay, T. M.

    1999-04-09

    In the early part of this workshop, I believe Dr. Bergles made a statement indicating that certain schools in America are planning to take the traditional heat transfer and fluid mechanics courses out of their curriculum and that some may have already done so. That statement created some excitement, and I did respond to that in some fashion and make some suggestions. Then Dr. Bergles said ''well maybe these matters should be included in a separate discussion period,'' which is this forum. Because I am working at the Advanced Photon Source at Argonne National Laboratory, I have the opportunity to witness the type of research being done in high technology areas today with the most advanced x-rays, which gives me some sort of advantage for telling you what I see as future research directions. Hence, I would like to reflect on all of this along a different avenue, and really my presentation will stress the educational side: essentially engineering education and what our role should be at the universities in teaching the next generation of students coming in and also what our role should be in retraining researchers for the demands of the emerging fields and markets.

  3. Residual-oil-saturation-technology test, Bell Creek Field, Montana. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-06-01

    A field test was conducted of the technology available to measure residual oil saturation following waterflood secondary oil recovery processes. The test was conducted in a new well drilled solely for that purpose, located immediately northwest of the Bell Creek Micellar Polymer Pilot. The area where the test was conducted was originally drilled during 1968, produced by primary until late 1970, and was under line drive waterflood secondary recovery until early 1976, when the area was shut in at waterflood depletion. This report presents the results of tests conducted to determine waterflood residual oil saturation in the Muddy Sandstone reservoir. The engineering techniques used to determine the magnitude and distribution of the remaining oil saturation included both pressure and sidewall cores, conventional well logs (Dual Laterolog - Micro Spherically Focused Log, Dual Induction Log - Spherically Focused Log, Borehole Compensated Sonic Log, Formation Compensated Density-Compensated Neutron Log), Carbon-Oxygen Logs, Dielectric Logs, Nuclear Magnetism Log, Thermal Decay Time Logs, and a Partitioning Tracer Test.

  4. Bibliography: Sandia Laboratories hybrid microcircuits and related thin film technology (revised)

    International Nuclear Information System (INIS)

    Oswalt, J.A.

    1975-12-01

    Hybrid circuit applications for nuclear weapons have been considered at Sandia since the mid-60's. However a major commitment was made in 1970 to develop a limited but well understood set of technologies for weapon applications. Development of these technologies and related studies have been documented in a number of publications. This bibliography lists the publications from 1968 to mid-1977 for reference by hybrid designers, users, or technologists

  5. A universal nonlinear relation among boundary states in closed string field theory

    International Nuclear Information System (INIS)

    Kishimoto, Isao; Matsuo, Yutaka; Watanabe, Eitoku

    2004-01-01

    We show that the boundary states satisfy a nonlinear relation (the idempotency equation) with respect to the star product of closed string field theory. This relation is universal in the sense that various D-branes, including the infinitesimally deformed ones, satisfy the same equation, including the coefficient. This paper generalizes our analysis [hep-th/0306189] in the following senses. (1) We present a background-independent formulation based on conformal field theory. It illuminates the geometric nature of the relation and allows us to more systematically analyze the variations around the D-brane background. (2) We show that the Witten-type star product satisfies a similar relation but with a more divergent coefficient. (3) We determine the coefficient of the relation analytically. The result shows that the α parameter can be formally factored out, and the relation becomes universal. We present a conjecture on vacuum theory based on this computation. (author)

  6. INFORMATION TECHNOLOGIES IN THE ASSESSMENT OF THE PREIMPLANTATION GENETIC DIAGNOSIS EFFICIENCY IN THE FIELD OF ASSISTED REPRODUCTIVE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    S. V. Denysenko

    2012-11-01

    Full Text Available Application of the information technologies is becoming increasingly important in the practice of molecular and cytogenetic analysis of chromosomal abnormalities in particular on the preimplantation level. Capacity of preimplantation diagnosis is based on fluorescent in situ hybridization (FISH and comparative genomic hybridization (CGH. Interpretation of FISH/CGH results is performed with the help of Applied Cytovision System.

  7. INNOVATIVE TECHNOLOGY VERIFICATION REPORT "FIELD MEASUREMENT TECHNOLOGIES FOR TOTAL PETROLEUM HYDROCARBONS IN SOIL" DEXSIL CORPORATION PETROFLAG SYSTEM

    Science.gov (United States)

    The PetroFLAGTm System developed by Dexsilo Corporation (Dexsil) was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The purpose o...

  8. How Scholars Define the Field of Computer Education and Instructional Technology?

    Directory of Open Access Journals (Sweden)

    Ömer Faruk İslim

    2016-07-01

    Full Text Available The term Instructional Technology has been used since 1960s and defined differently throughout the time.  Along with the increase in the use of information and communication technology in schools; the need for technologically qualified teachers has been increased. While many of instructional technology programs are at graduate level around the world; Turkey has an undergraduate level instructional technology program, called Computer Education and Instructional Technology (CEIT in addition to graduate level. The department of Computer Education and Instructional Technology was founded in 1998 during the re-construction of Faculties of Education in Turkey. The purpose of this study is to investigate the similarities and differences among how graduate students and faculty members define CEIT department, as well as their opinions on the current situation of the program, and their expectations. A case study has been conducted with 5 faculty members and 5 graduate students from three major universities in Turkey including Anadolu University,  Gazi University , and Middle East Technical University. Semi-structured interviews were used as the data collection tool.  The content analysis was used to analyze the data and results of the study showed that faculty members and graduate students have similar opinions about the scope of the department, expected qualifications and work areas, and challenges affecting academic life.Keywords: Computer education and instructional technology, definition of the field, academic staff, graduate studentsBilgisayar ve Öğretim Teknolojileri Eğitimi Bölümü Akademisyenler Tarafından Nasıl Tanımlanıyor?Öz Öğretim teknolojileri 1960’lı yıllardan beri kullanılmakta olan ve zamanla farklı şekillerde tanımlanmış bir kavramdır. Bilgi ve iletişim teknolojileri okullarda daha yaygın hale geldiğinden dolayı teknoloji konusunda donanımlı öğretmen ihtiyacı da artmıştır. Dünyada

  9. On the relation between fields and potentials in non abelian Gauge Theories

    International Nuclear Information System (INIS)

    Bollini, C.G.; Giambiagi, J.J.

    1979-01-01

    Some examples have been given in the literature of ambiguous gauge fields, i.e. those not having a unique potential (up to a gauge transformation). An example given by Deser and Wilczek is examined and found the condition (for any gauge group) that the group element generating the potentials must satisfy in order for the potentials not to be related by any gauge transformation. In three dimensions (for Su 2 ) there are other families of ambiguous fields characterized by arbitrary unit vector fields n vector (n vector) (n 2 vector =1). The example given by Wu and Yang belongs to a particular family with n vector = n vector. r vector / r vector. The sources of these fields and some interesting relations between them are also found [pt

  10. The roles of general and technology-related parenting in managing youth screen time.

    Science.gov (United States)

    Sanders, Wesley; Parent, Justin; Forehand, Rex; Breslend, Nicole Lafko

    2016-08-01

    This study examines the associations of 2 types of parenting practices-general adaptive parenting and technology-related strategies-with youth screen time. We hypothesized that technology-related parenting focused on behavioral control would relate directly to screen time and serve to link general parenting to screen time. Participants were 615 parents drawn from 3 community samples of families with children across 3 development stages: young childhood (3-7 years; n = 210), middle childhood (8-12 years; n = 200), and adolescents (13-17 years; n = 205). Using structural equation modeling, we found that general adaptive parenting was not related to child screen time but was positively related to technology-related parenting strategies for all 3 samples. For the young and, to some extent, middle childhood samples, but not for the adolescent sample, general adaptive parenting was positively linked to youth screen time through technology-related parenting strategies. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  11. Field evaluation of remote wind sensing technologies: Shore-based and buoy mounted LIDAR systems

    Energy Technology Data Exchange (ETDEWEB)

    Herrington, Thomas [Stevens Inst. of Technology, Hoboken, NJ (United States)

    2017-11-03

    the evaluation of LIDAR-based wind measurement systems to validate the accuracy of remotely measured wind data in marine applications. Specifically, the test-bed will be utilized to systematically evaluate the capability of emerging scanning LIDAR and buoy mounted vertically profiling LIDAR by: (1) Evaluating a fixed scanning LIDAR against land-based 50 and 60 meter high meteorological masts fitted with research quality cup-vane and/or sonic anemometers; (2) Evaluating a buoy mounted vertically profiling LIDAR fixed on land and floating in a sheltered bay against a co-located 60 meter high meteorological mast fitted with a research quality cup-vane and/or sonic anemometers and the fixed scanning LIDAR; and (3) Offshore field evaluation of both LIDAR platforms through a comparison of the fixed scanning LIDAR data and data obtained by the buoy mounted LIDAR located 10 miles offshore. The proposed research will systematically validate Light Detection and Ranging (LIDAR) based wind measurement systems and assess the temporal and spatial variability of the offshore wind resource in the Mid-Atlantic east of New Jersey. The goal of the proposed project is to address the technical and commercial challenges of the offshore wind energy industry by validating and assessing cost-effective, over ocean wind resource characterization technologies. The objective is to systematically evaluate the capability of both scanning and vertically profiling LIDARs to accurately measure 3D wind fields through comparison with fixed met masts and intercomparison among LIDAR platforms. Once validated, data collected by both buoy mounted vertically profiling LIDARs and shore-based, pulsed horizontally scanning LIDARs can be used to accurately assess offshore wind resources and to quantify the spatial and temporal variability in the offshore wind fields. One of the fundamental research questions to be addressed in phase 1 is the assessment of various measurement and data processing schemes to

  12. On the use of calibrated relative paleointensity records to improve millennial-scale geomagnetic field models

    OpenAIRE

    Monika Korte; C. Constable

    2006-01-01

    Current millennial-scale time-varying global geomagnetic field models suffer from a lack of intensity data compared to directional data, because only thermoremanently magnetized material can provide absolute information about the past field strength. The number of archeomagnetic artefacts that can provide such data diminishes rapidly prior to 3000 BC. Sediment cores provide time series of declination and inclination and of variations of magnetization: the latter can reflect relative geomagne...

  13. In dialogue with related fields of inquiry: The interdisciplinarity, normativity and contextuality of audience research

    OpenAIRE

    Mathieu, David; Brites, Maria José; Chimirri, Niklas; Saariketo, Minna

    2016-01-01

    This paper explores the borders of audience research with help of interviews of nine scholars who operate in related fields of inquiry. Inspired by the method of interactive interview, our dialogue with these scholars was encouraged by and serve to document the reflexivity involved in audience research in a manner unachievable by a traditional review of literature, offering a complement to CEDAR’s objective to review the field. We identify and illustrate three major constituents by which audi...

  14. Field-dependence/independence: ability in relation to mobility-fixity.

    Science.gov (United States)

    Hansson, S B; Rydén, O O; Johnsson, P

    1986-08-01

    Previous authors have pointed out that, while the classic Rod-and-Frame Test (RFT) yields a measure of ability to perform field-independently, it is unsuitable for identifying stylistic preference, such as mobility-fixity within the field-dependence/independence dimension. To relate mobility-fixity and ability aspects of field-dependence/independence, we compared data obtained from two versions of the test: one with a "free" instruction, on which the subjects were invited to adjust the rod to any position(s) they preferred on each of 10 trials and a process-oriented version (RFT-P), involving 20 trials with the standard instruction but with a constant rod-and-frame configuration, making possible analysis of the process of adaptation. Mobility versus fixity was defined in terms of more or less frequent changes of rod positions and choice of a high or a low proportion of nongeometrical positions in the RFT-Free. 38 female and 23 male university students completed first the RFT-Free and thereafter the RFT-Process. Women were more field-dependent than men throughout the RFT-Process trials; there were no differences between the sexes over trials or in choice of positions in the RFT-Free. Compared with field-dependent subjects, field-independent subjects more often changed rod positions in the RFT-Free and preferred nongeometrical positions somewhat more. Among field-independent subjects, those with consistently low deviations in RFT-Process more often preferred a variety of nongeometrical positions in RFT-Free than did those with gradually increasing deviations. We conclude that field-independence is associated with mobility and field-dependence with fixity, as defined by the RFT-Free variables, and that a prerequisite for high mobility is a relative stability of field-independence as reflected on the RFT-Process. Theoretical implications of this conclusion are discussed.

  15. Atom probe field ion microscopy and related topics: A bibliography 1993

    International Nuclear Information System (INIS)

    Godfrey, R.D.; Miller, M.K.; Russell, K.F.

    1994-10-01

    This bibliography, covering the period 1993, includes references related to the following topics: atom probe field ion microscopy (APFIM), field emission (FE), and field ion microscopy (FIM). Technique-oriented studies and applications are included. The references contained in this document were compiled from a variety of sources including computer searches and personal lists of publications. To reduce the length of this document, the references have been reduced to the minimum necessary to locate the articles. The references are listed alphabetically by authors, an Addendum of references missed in previous bibliographies is included

  16. Algebra with polynomial commutation relations for Zeeman effect in Coulomb-Dirac field

    International Nuclear Information System (INIS)

    Karasev, M.V.; Novikova, E.M.

    2005-01-01

    One studies a model of a particle motion in the field of electromagnetic monopole (the Coulomb-Dirac field) disturbed by homogeneous magnetic and inhomogeneous electric fields. The quantum averaging is followed by occurrence of the integrated system the Hamiltonian of which is represented by the algebra elements with polynomial commutation relations. One forms irreducible representations of the mentioned algebra and its hypergeometric coherent states. One obtains the representation of the eigenfunction of the assumption problem and specifies the asymptotics of eigenvalues in the first order of perturbation theory [ru

  17. Atom probe field ion microscopy and related topics: A bibliography 1993

    Energy Technology Data Exchange (ETDEWEB)

    Godfrey, R.D.; Miller, M.K.; Russell, K.F.

    1994-10-01

    This bibliography, covering the period 1993, includes references related to the following topics: atom probe field ion microscopy (APFIM), field emission (FE), and field ion microscopy (FIM). Technique-oriented studies and applications are included. The references contained in this document were compiled from a variety of sources including computer searches and personal lists of publications. To reduce the length of this document, the references have been reduced to the minimum necessary to locate the articles. The references are listed alphabetically by authors, an Addendum of references missed in previous bibliographies is included.

  18. Microbiological aspects related to the feasibility of PEF technology for food pasteurization.

    Science.gov (United States)

    Saldaña, G; Álvarez, I; Condón, S; Raso, J

    2014-01-01

    Processing unit operations that seek to inactivate harmful microorganisms are of primary importance in ascertaining the safety of food. The capability of pulsed electric fields (PEF) to inactivate vegetative cells of microorganisms at temperatures below those used in thermal processing makes this technology very attractive as a nonthermal pasteurization process for the food industry. Commercial exploitation of this technology for food pasteurization requires the identification of the most PEF-resistant microorganisms that are of concern to public health. Then, the treatment conditions applicable at industrial scale that would reduce the population of these microorganisms to a level that guarantees food safety must be defined. The objective of this paper is to critically compile recent, relevant knowledge with the purpose of enhancing the feasibility of using PEF technology for food pasteurization and underlining the required research for designing PEF pasteurization processes.

  19. Incorporating Geodetic Technologies in to Field and Campus Courses at the University of Michigan: Best Practices and Lessons Learned

    Science.gov (United States)

    Niemi, N. A.; Clark, M. K.

    2017-12-01

    For the past 6 years, the University of Michigan has implemented geodetic techniques into both summer field courses and on-campus courses. The primary means for incorporating these technologies has been a partnership with UNAVCO to introduce terrestrial laser scanning (TLS) at summer field courses, although employing Structure from Motion(SfM), ArcCollector for iPads and RTK GPS surveying have also been explored. The nature of these types of data lend themselves readily to geomorphology, environmental, and natural hazards-based projects, and we have developed field projects or labs around neotectonics (fault-scarp scanning and diffusion analysis), change detection (braided stream evolution, landslide and rock glacier motion, coastal change) and mass wasting processes (rock avalanche scanning and analysis). While we have primarily developed multi-day projects that use these tools in a field camp setting, we have also developed weekend field trip projects and traditional afternoon lab exercises associated with on-campus courses. The use of geodetic technology is generally well received by students. Reasons for this are the use of somewhat different skill sets from traditional geologic mapping problems, including research survey design, real-time data acquisition, and quantitative data analysis. Students also perceive that they are engaged in learning technology which they may use in their future employment. Challenges encountered, particularly in the field, include managing large student groups with a finite pool of equipment, rapid data processing pressures, variable student experience with analysis software and limited technical support for field-based computational resources. We will describe the positive attributes of incorporating geodetic technologies into undergraduate courses and elaborate on some best practices learned from our experiences.

  20. Predicting Elementary Education Candidates' Technology Integration during Their Field Placement Instruction.

    Science.gov (United States)

    Negishi, Meiko; Elder, Anastasia D.; Hamil, J. Burnette; Mzoughi, Taha

    A growing concern in teacher education programs is technology training. Research confirms that training positively affects perservice teachers' attitudes and technology proficiency. However, little is known about the kinds of factors that may predict preservice teachers' integration of technology into their own instruction. The goal of this study…

  1. A Phenomenological Study of Teacher Qualifications in a Technology Pure Classroom: Perspectives from the Field

    Science.gov (United States)

    Hand, Thea

    2012-01-01

    In the last 20 years, educational technology has exploded into the schoolhouse as a result of the exponential advances being made on a global front in technology to include the Internet, personal computing, smart phones and mobile devices. Much research has been conducted regarding the advent of integrating this technology within the core…

  2. Psychological adaptation in the info-communication society: the revised version of the technology-related psychological consequences Questionnaire

    OpenAIRE

    Emelin, Vadim; Tkhostov, Alexander; Rasskazova, Elena

    2014-01-01

    The aim of the study is to consider technology-related changes in psychological needs and boundaries that affect one’s personal adaptation to the info-communication society, as well as how they relate to problematic or excessive technology use. Based on the psychological model of the consequences of technology use, we’ve picked two forms of technology use (one related to mobile phones and the other related to the Internet) from a revised version of our Technology-Related Psychological Consequ...

  3. Psychological adaptation in the info-communication society: The revised version of Technology-Related Psychological Consequences Questionnaire.

    OpenAIRE

    Emelin V.A.; Tkhostov A.Sh.; Rasskazova E.I.

    2014-01-01

    The aim of the study is to consider technology-related changes in psychological needs and boundaries that affect one’s personal adaptation to the info-communication society, as well as how they relate to problematic or excessive technology use. Based on the psychological model of the consequences of technology use, we’ve picked two forms of technology use (one related to mobile phones and the other related to the Internet) from a revised version of our Technology-Related Psychological Consequ...

  4. FIELD DEMONSTRATION OF INNOVATIVE LEAK DETECTION/LOCATION TECHNOLOGIES COUPLED WITH WALL-THICKNESS SCREENING FOR WATER MAINS

    Science.gov (United States)

    The U.S. Environmental Protection Agency sponsored a large-scale field demonstration of innovative leak detection/location and condition assessment technologies on a 76-year old, 2,500-ft long, cement-lined, 24-in. cast iron water main in Louisville, KY from July through Septembe...

  5. Sandia Wake Imaging System Field Test Report: 2015 Deployment at the Scaled Wind Farm Technology (SWiFT) Facility.

    Energy Technology Data Exchange (ETDEWEB)

    Naughton, Brian Thomas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Herges, Thomas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    This report presents the objectives, configuration, procedures, reporting , roles , and responsibilities and subsequent results for the field demonstration of the Sandia Wake Imaging System (SWIS) at the Sandia Scaled Wind Farm Technology (SWiFT) facility near Lubbock, Texas in June and July 2015.

  6. Emerging Trends on the Topic of Information Technology in the Field of Educational Sciences: A Bibliometric Exploration

    Science.gov (United States)

    González-Valiente, Carlos Luis

    2015-01-01

    The paper presents a bibliometric analysis on the topic of Information Technology (IT) in the field of Educational Sciences, aimed at envisioning the research emerging trends. The ERIC database is used as a consultation source; the results were subjected to productivity by authors, journals, and term co-occurrence analysis indicators for the…

  7. Formalization and Interaction: Toward a Comprehensive History of Technology-Related Knowledge in Early Modern Europe.

    Science.gov (United States)

    Popplow, Marcus

    2015-12-01

    Recent critical approaches to what has conventionally been described as "scientific" and "technical" knowledge in early modern Europe have provided a wealth of new insights. So far, the various analytical concepts suggested by these studies have not yet been comprehensively discussed. The present essay argues that such comprehensive approaches might prove of special value for long-term and cross-cultural reflections on technology-related knowledge. As heuristic tools, the notions of "formalization" and "interaction" are proposed as part of alternative narratives to those highlighting the emergence of "science" as the most relevant development for technology-related knowledge in early modern Europe.

  8. Recent status of research activities for development of CTBT-related technologies in JAERI

    International Nuclear Information System (INIS)

    Hirota, Naoki; Houkida, Takanori; Inoue, Yoji

    2003-08-01

    This report describes research activities of the R and D Group for Non-Proliferation Technology related to the Comprehensive Nuclear-Test-Ban Treaty (CTBT) verification regime. The main subjects of this report are (1) an overview of the CTBT verification regime, (2) preparation of the National Data Center for radionuclide data, (3) construction and operation of the radionuclide monitoring stations at Takasaki and Okinawa and the certified radionuclide laboratory at Tokai in Japan. We have participated in an intercomparison test internationally organized for the certified laboratories and the test results are given here. Scientific application of the CTBT-related technologies to environmental researches is also depicted. (author)

  9. System failure, innovation policy and patents: Fuel cells and related hydrogen technology in Norway 1990-2002

    International Nuclear Information System (INIS)

    Godoe, Helge; Nygaard, Stian

    2006-01-01

    The empirical focus of this article is technological innovation activities in the emerging field of fuel cells and related hydrogen technology in Norway from 1990 to 2002. In this period, four comparatively large-scale research and development projects and a number of smaller projects aimed at development of fuel cells technology were undertaken, resulting in many inventions that were subsequently patented. Although this creativity may be considered an indication of success, only one of the projects became successful in an innovation perspective. All the large projects were initiated and funded for divergent political and economic reasons. An important reason in the late 1980s was the prospect of using Norway's abundant supply of natural gas in fuel cells for electric power generation. The large R and D projects that attempted to develop fuel cells based on natural gas as energy source failed. In contrast, the successful project was undertaken by military R and D, i.e. in a different system of innovation than the projects that failed. Analysis of these cases points to the importance of a systemic approach to innovations-and to policy making. One challenge for policy makers is to decide how they should promote this development which is crucial for the vision of a future 'Hydrogen Economy', i.e. what kind of policy incentives should be introduced to spur efficiency in technological development and diffusion. Theoretically, many options are available; however, understanding the innovation dynamics in this sector is fundamental for making choices. In this article, focus will be set on policy aspects using an innovation systemic approach to analyze development of fuel cells and related hydrogen technology in Norway

  10. Field studies of erosion-control technologies for arid shallow land-burial sites at Los Alamos

    International Nuclear Information System (INIS)

    Nyhan, J.W.; Abeele, W.V.; DePoorter, G.L.; Hakonson, T.E.; Perkins, B.A.; Foster, G.R.

    1983-01-01

    The field research program involving corrective measures technologies for arid shallow land-burial sites is described. Research performed for a portion of this task, the identification, evaluation, and modeling of erosion control technologies, is presented in detail. In a joint study with USDA-ARS, soil erosion and infiltration of water into a simulated trench cap with various surface treatments was measured and compared with data from undisturbed soil surfaces with natural plant cover. The distribution of soil particles in the runoff was measured for inclusion in CREAMS (a field scale model for Chemicals, Runoff and Erosion from Agricultural Management Systems). Neutron moisture gauge data collected beneath the erosion plots are presented to show the seasonal effects of the erosion control technologies on the subsurface component of water balance. 12 references, 4 figures, 4 tables

  11. How carbon pricing changes the relative competitiveness of low-carbon baseload generating technologies

    Energy Technology Data Exchange (ETDEWEB)

    Nicholson, M.; Biegler, T.; Brook, B.W. [University of Adelaide, Adelaide, SA (Australia). School of Earth & Environmental Science

    2011-01-15

    There is wide public debate about which electricity generating technologies will best be suited to reduce greenhouse gas emissions (GHG). Sometimes this debate ignores real-world practicalities and leads to over-optimistic conclusions. Here we define and apply a set of fit-for-service criteria to identify technologies capable of supplying baseload electricity and reducing GHGs by amounts and within the timescale set by the Intergovernmental Panel on Climate Change (IPCC). Only five current technologies meet these criteria: coal (both pulverised fuel and integrated gasification combined cycle) with carbon capture and storage (CCS); combined cycle gas turbine with CCS; Generation III nuclear fission; and solar thermal backed by heat storage and gas turbines. To compare costs and performance, we undertook a meta-review of authoritative peer-reviewed studies of levelised cost of electricity (LCOE) and life-cycle GHG emissions for these technologies. Future baseload electricity technology selection will be influenced by the total cost of technology substitution, including carbon pricing, which is synergistically related to both LCOE and emissions. Nuclear energy is the cheapest option and best able to meet the IPCC timetable for GHG abatement. Solar thermal is the most expensive, while CCS will require rapid major advances in technology to meet that timetable.

  12. A Review of User-Centered Design for Diabetes-Related Consumer Health Informatics Technologies

    Science.gov (United States)

    LeRouge, Cynthia; Wickramasinghe, Nilmini

    2013-01-01

    User-centered design (UCD) is well recognized as an effective human factor engineering strategy for designing ease of use in the total customer experience with products and information technology that has been applied specifically to health care information technology systems. We conducted a literature review to analyze the current research regarding the use of UCD methods and principles to support the development or evaluation of diabetes-related consumer health informatics technology (CHIT) initiatives. Findings indicate that (1) UCD activities have been applied across the technology development life cycle stages, (2) there are benefits to incorporating UCD to better inform CHIT development in this area, and (3) the degree of adoption of the UCD process is quite uneven across diabetes CHIT studies. In addition, few to no studies report on methods used across all phases of the life cycle with process detail. To address that void, the Appendix provides an illustrative case study example of UCD techniques across development stages. PMID:23911188

  13. Comparing relational model transformation technologies: implementing Query/View/Transformation with Triple Graph Grammars

    DEFF Research Database (Denmark)

    Greenyer, Joel; Kindler, Ekkart

    2010-01-01

    tool. In contrast to many other transformation technologies, both QVT and TGGs declaratively define the relation between two models. With this definition, a transformation engine can execute a transformation in either direction and, based on the same definition, can also propagate changes from one......The Model Driven Architecture (MDA) is an approach to develop software based on different models. There are separate models for the business logic and for platform specific details. Moreover, code can be generated automatically from these models. This makes transformations a core technology for MDA...... and for model-based software engineering approaches in general. QVT (Query/View/Transformation) is the transformation technology recently proposed for this purpose by the OMG. TGGs (Triple Graph Grammars) are another transformation technology proposed in the mid-nineties, used for example in the FUJABA CASE...

  14. A near-null magnetic field affects cryptochrome-related hypocotyl growth and flowering in Arabidopsis

    Science.gov (United States)

    Xu, Chunxiao; Yin, Xiao; Lv, Yan; Wu, Changzhe; Zhang, Yuxia; Song, Tao

    2012-03-01

    The blue light receptor, cryptochrome, has been suggested to act as a magnetoreceptor based on the proposition that photochemical reactions are involved in sensing the geomagnetic field. But the effects of the geomagnetic field on cryptochrome remain unclear. Although the functions of cryptochrome have been well demonstrated for Arabidopsis, the effect of the geomagnetic field on the growth of Arabidopsis and its mechanism of action are poorly understood. We eliminated the local geomagnetic field to grow Arabidopsis in a near-null magnetic field and found that the inhibition of Arabidopsis hypocotyl growth by white light was weakened, and flowering time was delayed. The expressions of three cryptochrome-signaling-related genes, PHYB, CO and FT also changed; the transcript level of PHYB was elevated ca. 40%, and that of CO and FT was reduced ca. 40% and 50%, respectively. These data suggest that the effects of a near-null magnetic field on Arabidopsis are cryptochrome-related, which may be revealed by a modification of the active state of cryptochrome and the subsequent signaling cascade.

  15. Indian Nuclear Society annual conference-1994 on advanced technologies related to nuclear power: proceedings

    International Nuclear Information System (INIS)

    Grover, R.B.

    1994-01-01

    The focal theme of the conference is advanced technologies related to nuclear power. Over the past three decades civilian nuclear power plants around the world have accumulated about 6000 reactor years of experience and have performed quite well. Overall safety record has been satisfactory. However, nuclear community is trying to compete with its own record by trying to enhance the safety characteristics of the best operating plant. A safety culture has been established in the nuclear establishments, which is providing impetus to advances in all aspects of nuclear technology all over the world. India has ongoing programmes for the development of advanced reactors and related advanced technologies. Evolution of pressurised heavy water reactors in India, developments made in the design of advanced heavy water reactor and the fast reactor programme, are some of the topics covered in addition to highlighting worldwide developments for the next generation of light water reactors. India is one of the few countries in the world where expertise about complete fuel cycle is available. Developments in the back end of the fuel cycle, use of thorium and plutonium and other related issues are also discussed. Technology control regimes being advocated and adopted by developed nations make it imperative for us to indigenise every equipment and component that goes into a power plant. In view of this, some aspects of manufacturing technologies, inspection techniques and maintenance problems are also covered. Relevant papers are processed separately for INIS. (M.K.V.)

  16. Measurability of quantum fields and the energy-time uncertainty relation

    International Nuclear Information System (INIS)

    Mensky, Mikhail B

    2011-01-01

    Quantum restrictions on the measurability of an electromagnetic field strength and their relevance to the energy-time uncertainty relation are considered. The minimum errors in measuring electromagnetic field strengths, as they were estimated by the author (1988) in the framework of the phenomenological method of restricted path integral (RPI), are compared with the analogous estimates found by Landau and Peierls (1931) and by Bohr and Rosenfeld (1933) with the help of certain measurement setups. RPI-based restrictions, including those of Landau and Peierls as a special case, hold for any measuring schemes meeting the strict definition of measurement. Their fundamental nature is confirmed by the fact that their associated field detectability condition has the form of the energy-time uncertainty relation. The weaker restrictions suggested by Bohr and Rosenfeld rely on an extended definition of measurement. The energy-time uncertainty relation, which is the condition for the electromagnetic field to be detectable, is applied to the analysis of how the near-field scanning microscope works. (methodological notes)

  17. Feasibility and usability of a home monitoring concept based on mobile phones and near field communication (NFC) technology.

    Science.gov (United States)

    Morak, Jürgen; Kollmann, Alexander; Schreier, Günter

    2007-01-01

    Utilization of mobile information and communication technologies in home monitoring applications is becoming more and more common. The mobile phone, acting as a patient terminal for patients suffering from chronic diseases, provides an active link to the caregiver to transmit health status information and receive feedback. In such a concept the usability is still limited by the necessity of entering the values via the mobile phone's small keypad. The near field communication technology (NFC), a touch-based wireless interface that became available recently, may improve the usability level of such applications significantly. The focus of this paper is to describe the development of a prototype application based on this technology embedded in a home monitoring system. The feasibility and usability of this approach are evaluated and compared with concepts used in previous approaches. The high quantifier with respect to overall usability indicates that NFC may be the technology of choice for some tasks in home monitoring applications.

  18. Effect of magnetic field on the wave dispersion relation in three-dimensional dusty plasma crystals

    Energy Technology Data Exchange (ETDEWEB)

    Yang Xuefeng [School of Mathematical Sciences, Dalian University of Technology, Dalian 116024 (China); Wang Zhengxiong [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China)

    2012-07-15

    Three-dimensional plasma crystals under microgravity condition are investigated by taking into account an external magnetic field. The wave dispersion relations of dust lattice modes in the body centered cubic (bcc) and the face centered cubic (fcc) plasma crystals are obtained explicitly when the magnetic field is perpendicular to the wave motion. The wave dispersion relations of dust lattice modes in the bcc and fcc plasma crystals are calculated numerically when the magnetic field is in an arbitrary direction. The numerical results show that one longitudinal mode and two transverse modes are coupled due to the Lorentz force in the magnetic field. Moreover, three wave modes, i.e., the high frequency phonon mode, the low frequency phonon mode, and the optical mode, are obtained. The optical mode and at least one phonon mode are hybrid modes. When the magnetic field is neither parallel nor perpendicular to the primitive wave motion, all the three wave modes are hybrid modes and do not have any intersection points. It is also found that with increasing the magnetic field strength, the frequency of the optical mode increases and has a cutoff at the cyclotron frequency of the dust particles in the limit of long wavelength, and the mode mixings for both the optical mode and the high frequency phonon mode increase. The acoustic velocity of the low frequency phonon mode is zero. In addition, the acoustic velocity of the high frequency phonon mode depends on the angle of the magnetic field and the wave motion but does not depend on the magnetic field strength.

  19. Reexamination of relations between the Myers-Briggs type indicator and field dependence-independence.

    Science.gov (United States)

    Schmidt, C P; McCutcheon, J W

    1988-12-01

    The Group Embedded Figures Test and the Myers-Briggs Type Indicator were administered to 210 undergraduate and graduate students. Bivariate relations between the embedded figures test and the Indicator scales of Extraversion-Introversion (EI), Thinking-Feeling (TF), and Judgment-Perception (JP) were nonsignificant while the relation between scores on embedded figures and Sensing-Intuition (SN) was statistically significant. ESFP, ISFJ, and ESFJ types were significantly more field-dependent than the INFP and ENTP types.

  20. The Age-Metallicity Relation for the Field Disk Stars in the Solar Neighborhood

    Science.gov (United States)

    Lee, See-Woo; Ann, Hong Bae; Sung, Hwankyung

    1989-06-01

    The ages of field stars given in the catalogue of Cayrel de Strobel et al.(1985) are derived by the five different methods with combination of theoretical isochrones. By using these ages and metal abundances homogenized by Lee and Choe(1988), the age-metallicity relations are obtained. For disk stars of [Fe/H] > -0.9, the present age-metallicity relations are nearly consistent with those given by Twarog(1980) and Carlberg et al.(1985).

  1. Development of dual field magnetic flux leakage (MFL) inspection technology to detect mechanical damage.

    Science.gov (United States)

    2013-03-01

    This report details the development and testing of a dual magnetization in-line inspection (ILI) : tool for detecting mechanical damage in operating pipelines, including the first field trials of a : fully operational dual-field magnetic flux leakage...

  2. An Analysis of Gender Equity in the Federal Labor Relations Career Field.

    Science.gov (United States)

    Baker, Bud; Wendt, Ann; Slonaker, William

    2002-01-01

    Government employment statistics indicate that the number of federal labor relations specialists declined 7% from 1991-2000; the proportion of women in the field grew from 42.2% to 50.9%; and the pay gap narrowed. The number of women in upper management rose 18% between 1991 and 1998. (Contains 31 references.) (SK)

  3. Quantum Gravity in Everyday Life: General Relativity as an Effective Field Theory.

    Science.gov (United States)

    Burgess, Cliff P

    2004-01-01

    This article is meant as a summary and introduction to the ideas of effective field theory as applied to gravitational systems, ideas which provide the theoretical foundations for the modern use of general relativity as a theory from which precise predictions are possible.

  4. Elevating the Role of Race in Ethnographic Research: Navigating Race Relations in the Field

    Science.gov (United States)

    Brown, Keffrelyn D.

    2011-01-01

    Little work in the social sciences or in the field of education has fully explored the methodological issues related to the study of race and racism, yet qualitative researchers acknowledge that race plays (and should play) a role in the research process. Indeed, race frames and informs the context, practices and perspectives of everyday lived…

  5. Quantum Gravity in Everyday Life: General Relativity as an Effective Field Theory

    Directory of Open Access Journals (Sweden)

    Burgess Cliff P.

    2004-01-01

    Full Text Available This article is meant as a summary and introduction to the ideas of effective field theory as applied to gravitational systems, ideas which provide the theoretical foundations for the modern use of general relativity as a theory from which precise predictions are possible.

  6. Mayer expansions for Euclidean lattice field theory: Convergence properties and relation with perturbation theory

    International Nuclear Information System (INIS)

    Pordt, A.

    1985-10-01

    The author describes the Mayer expansion in Euclidean lattice field theory by comparing it with the statistical mechanics of polymer systems. In this connection he discusses the Borel summability and the analyticity of the activities on the lattice. Furthermore the relations between renormalization and the Mayer expansion are considered. (HSI)

  7. Relative importance of vertebrates and invertebrates in epigeaic weed seed predation in organic cereal fields

    NARCIS (Netherlands)

    Westerman, P.R.; Hofman, A.; Vet, L.E.M.; Van der Werf, W.

    2003-01-01

    Exclosure trials were conducted in four organic cereal fields in The Netherlands in 1999 and 2000 to determine the relative importance of vertebrates and invertebrates in weed seed predation. The trials showed that seed predation by vertebrates was rather consistent and predictable, occurring on all

  8. Effects of sleep deprivation on event-related fields and alpha activity during rhythmic force production

    NARCIS (Netherlands)

    Boonstra, T.W.; Daffertshofer, A.; Beek, P.J.

    2005-01-01

    The influence of sleep deprivation (SD) on event-related fields and the distribution of power over the scalp of MEG imaged brain activity was studied during acoustically paced rhythmic force production. At the behavioral level, SD resulted in a reduction of the lag (negative asynchrony) between

  9. Editorial 6th International Conference on Near-field Optics and Related Techniques

    NARCIS (Netherlands)

    van Hulst, N.F.

    2001-01-01

    This topical issue of the Journal of Microscopy contains all of the papers are based on work presented at NFO-6, the 6th International Conference on Near-field Optics and Related Techniques, held at the University of Twente, Enschede, the Netherlands, 27-31 August 2000.

  10. Rethinking Research Supervision: Some Reflections from the Field of Employment Relations

    Science.gov (United States)

    Bingham, Cecilie; Durán-Palma, Fernando

    2014-01-01

    This essay offers some reflections for the theory and practice of research supervision drawn from the field of employment relations. It argues that rethinking supervision in terms of the employment relationship can advance dialogue and debate about supervision. This is twofold. (1) Reframing supervision in terms of the employment relationship can…

  11. Cueing attention by relative motion in the periphery of the visual field.

    Science.gov (United States)

    Poggel, Dorothe A; Strasburger, Hans; MacKeben, Manfred

    2007-01-01

    Sudden changes of visual stimulation attract attention. The observer's body motion generates retinal-flow field patterns containing information about his/her own speed and trajectory and relative motion of other objects. We investigated the effectiveness of relative motion as an attentional cue and compared it with conventional cueing by appearance of a frame in the far periphery of the visual field. In a group of ten subjects, contrast thresholds for the perception of static Gabor grating orientation [four alternative non-forced-choice (4ANFC)] task were determined at 20 degrees, 30 degrees, 40 degrees, and 60 degrees eccentricity. Subsequently, near-threshold discrimination performance of Gabor pattern orientation without versus with a ring-shaped cue was measured at the same positions. The same Gabor patterns were then presented embedded in a random-dot flow field, and uncued discrimination performance was compared with performance after presentation of a relative-motion cue (RMC), ie a small random-dot field with motion in the opposite direction of the flow field. Both the conventional ring cue and the RMC induced significantly increased discrimination performance at all test locations. With the parameters chosen for this study, the RMC was slightly less effective than the conventional cue, but its effects were somewhat more pronounced in the far periphery of the visual field. Thus, relative motion is a powerful cue to attract attention to peripheral visual objects and improves performance as effectively as a conventional ring cue. The findings have practical relevance for everyday life, in particular for tasks like driving and navigation.

  12. Is Sordac’s Rapid Acquisition Process Best Prepared To Field Solutions For Future Technological Challenges

    Science.gov (United States)

    2016-03-31

    warfighter’s urgent requirements by modifying commercial or military ‘off the shelf’ (COTS or MOTS ) technology. However, when there is no existing solution...Strategically, SORDAC recognizes that educating and motivating its people is the key to enduring innovation and improvement. To that end, SORDAC...Science and Technology challenges while championing science, technology, engineering and mathematics education for 9 all levels of society.”17

  13. R&D manpower and technological performance : The impact of demographic and task-related diversity

    NARCIS (Netherlands)

    Faems, D.L.M.; Subramaniam, A.

    2013-01-01

    We assess the impact of R&D manpower diversity on firms' technological performance. Relying on insights from two theoretical perspectives on team diversity (i.e. social categorization perspective and information decision-making perspective), we hypothesize that both demographic and task-related

  14. An Examination of Principal Technology Proficiency as It Relates to Leadership Styles

    Science.gov (United States)

    Massey, Shawn L.

    2014-01-01

    Research is limited when it comes to measuring principals' technology use as it relates to their leadership behaviors. Increasingly, principals are required to assume leadership responsibilities in areas with which they are unfamiliar and for which they have received little training (Flanagan & Jacobsen, 2003). Based on the requirement for…

  15. Machine Shop I. Learning Activity Packets (LAPs). Section B--Basic and Related Technology.

    Science.gov (United States)

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains eight learning activity packets (LAPs) for the "basic and related technology" instructional area of a Machine Shop I course. The eight LAPs cover the following topics: basic mathematics, blueprints, rules, micrometer measuring tools, Vernier measuring tools, dial indicators, gaging and inspection tools, and…

  16. 76 FR 18194 - Notice of Patent Application Deadline for Advanced Battery Technology Related Patents for...

    Science.gov (United States)

    2011-04-01

    ... DEPARTMENT OF DEFENSE Department of the Army Notice of Patent Application Deadline for Advanced Battery Technology Related Patents for Exclusive, Partially Exclusive, or Non- Exclusive Licenses; Battery Day Patent Licensing Meeting AGENCY: Department of the Army, DoD. ACTION: Notice. SUMMARY: The...

  17. Using Text Mining to Uncover Students' Technology-Related Problems in Live Video Streaming

    Science.gov (United States)

    Abdous, M'hammed; He, Wu

    2011-01-01

    Because of their capacity to sift through large amounts of data, text mining and data mining are enabling higher education institutions to reveal valuable patterns in students' learning behaviours without having to resort to traditional survey methods. In an effort to uncover live video streaming (LVS) students' technology related-problems and to…

  18. Socio-Demographic Factors Relating to Perception and Use of Mobile Technologies in Tertiary Teaching

    Science.gov (United States)

    Lai, Kwok-Wing; Smith, Lee

    2018-01-01

    In 2014, we investigated how socio-demographic factors such as gender, teaching disciplines, teaching experience and academic seniority were related to the perception and use of digital mobile technologies in learning and teaching of a group of university teachers from one research-intensive university in New Zealand. Three hundred and eight…

  19. Evaluating Progression in Students' Relational Thinking While Working on Tasks with Geospatial Technologies

    NARCIS (Netherlands)

    Favier, Tim; van der Schee, Joop

    2014-01-01

    One of the facets of geographic literacy is the ability to think in a structured way about geographic relationships. Geospatial technologies offer many opportunities to stimulate students’ geographic relational thinking. The question is: How can these opportunities be effectuated? This paper

  20. Evaluating Progression in Students' Relational Thinking While Working on Tasks with Geospatial Technologies

    Science.gov (United States)

    Favier, Tim; Van Der Schee, Joop

    2014-01-01

    One of the facets of geographic literacy is the ability to think in a structured way about geographic relationships. Geospatial technologies offer many opportunities to stimulate students' geographic relational thinking. The question is: How can these opportunities be effectuated? This paper discusses the results of a process-oriented experiment…

  1. Why don't girls choose technological studies? Adolescents' stereotypes and attitudes towards studies related to medicine or engineering.

    Science.gov (United States)

    López-Sáez, Mercedes; Puertas, Susana; Sáinz, Milagros

    2011-05-01

    Gender differences in choice of studies emerge already in adolescence. Two studies with adolescents are presented, the goal of which is to explore the influence of gender by assessing males and females who choose studies related to Medicine or Engineering. Study 1, correlational (N = 330, mean age 15.9, 56.7% girls), shows that girls who choose technology are more poorly appraised than girls who choose other studies. Study 2 (N = 130; mean age 16.77, 56.2% girls), experimental, measures implicit attitudes (using the IAT) towards males and females from Medicine and Engineering. Implicit attitudes are more favorable towards women if they are studying Medicine and towards men if they study Engineering. The results are analyzed with relation to the percentages of boys and girls in the different fields of study.

  2. Work-related Stress: Survey of academic staff in the Institutes of Technology Sector

    OpenAIRE

    Kenny, Aidan

    2015-01-01

    This article presents findings from a survey of professional workers in the institutes of technology sector in Ireland regarding work-related stress. The research instrument was based on a work-related stress questionnaire developed by the UK Health and Safety Executive, augmented with a specific subset of questions relevant to the Irish higher education sector. The questionnaire format was modified to enable online delivery. It was distributed to a sample population in 2014 with a response r...

  3. Tata Kelola Pada Perguruan Tinggi Menggunakan Control Objective for Information & Related Technology (COBIT) 5

    OpenAIRE

    asriyanik, asriyanik; Hendayun, Mokhamad

    2017-01-01

    A College needs a good governance in implementation of information technology, especially which related with information security because information is an important asset. Framework which can be used for the preparation of information security governance is COBIT 5 from ISACA. The first step to start the preparation of the governance using COBIT is mapping between the goal of college with enterprise goals (EG), IT Related Goals and domain process COBIT 5. From 15 colleges that have been acc...

  4. Remote-Sensing-Based Evaluation of Relative Consumptive Use Between Flood- and Drip-Irrigated Fields

    Science.gov (United States)

    Martinez Baquero, G. F.; Jordan, D. L.; Whittaker, A. T.; Allen, R. G.

    2013-12-01

    Governments and water authorities are compelled to evaluate the impacts of agricultural irrigation on economic development and sustainability as water supply shortages continue to increase in many communities. One of the strategies commonly used to reduce such impacts is the conversion of traditional irrigation methods towards more water-efficient practices. As part of a larger effort by the New Mexico Interstate Stream Commission to understand the environmental and economic impact of converting from flood irrigation to drip irrigation, this study evaluates the water-saving effectiveness of drip irrigation in Deming, New Mexico, using a remote-sensing-based technique combined with ground data collection. The remote-sensing-based technique used relative temperature differences as a proxy for water use to show relative differences in crop consumptive use between flood- and drip-irrigated fields. Temperature analysis showed that, on average, drip-irrigated fields were cooler than flood-irrigated fields, indicating higher water use. The higher consumption of water by drip-irrigated fields was supported by a determination of evapotranspiration (ET) from all fields using the METRIC Landsat-based surface energy balance model. METRIC analysis yielded higher instantaneous ET for drip-irrigated fields when compared to flood-irrigated fields and confirmed that drip-irrigated fields consumed more water than flood-irrigated fields planted with the same crop. More water use generally results in more biomass and hence higher crop yield, and this too was confirmed by greater relative Normalized Difference Vegetation Index for the drip irrigated fields. Results from this study confirm previous estimates regarding the impacts of increased efficiency of drip irrigation on higher water consumption in the area (Ward and Pulido-Velazquez, 2008). The higher water consumption occurs with drip because, with the limited water supplies and regulated maximum limits on pumping amounts, the

  5. The Enemy is Still Below: The Global Diffusion of Submarines and Related Technology

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, K G

    2012-06-05

    The spread of submarines and related technology is an end product of globalization. Globalization is not a new story. By one estimate, our ancestors first crossed out of Africa roughly 80,000 years ago, and began the process that they now call globalization. With the dispersion of people around the world came the development of culture and civilization as well as the spread of ideas, goods, and technology. The process of globalization then is a long-standing one, not an innovation of the late 20th and early 21st centuries. Over the millennia, this process has been an uneven one. Globalization has often cuased great disruptions even to the societies that initiated various innovations in culture and civilization, including science and technology. Indeed, many cultures and civilizations have disappeared while some regions failed to advance as rapidly as others, so the process of globalization is not just one of continuing progress. Globalization in the current era seems to be penetrating the most remote corners of the world at a remarkable rate as a result of advances in science and technology, particularly information technology. The diffusion of science and technology is not necessarily a benign development. It could increase the potential for a global military industrial base that may have an adverse affect on world stability in the future. For example, the spread of key military capabilities, like submarines, could still have an impact, especially over the longer term, on the US capability to project power overseas.

  6. The Ecological Behaviour Related to Green Information and Communication Technology in Romanian Organizations

    Directory of Open Access Journals (Sweden)

    Laura-Diana Radu

    2014-12-01

    Full Text Available An increased focus on environmental issues and the fulminant development of information and communication technologies led to the appearance and increased interest in the green characteristics of the available products and services. The ecological behaviour related to these technologies used by organizations, has become a widely studied and applied topic nowadays. In this context, this paper aims to analyse the perception of managers and employees of the Romanian companies in relation to the green information and communication technologies in the attempt to offer a genuine image of their attitude and see if their views are close to the international vision on environment protection. Starting from the literature regarding information and communication technologies and the available empirical studies, we have made an analysis on two categories of organizations: the ones that apply environment policies supported by the institutions and the ones that do not apply any policies, including comparisons between them. The conclusions of the study pointed out the presence of environmental concerns, not always clearly drawn or applied, but they could form the basis for the future actions and initiatives of consumers of information and communication technologies products and services in the wider context and will to fall into line with the Western level of economic and social development.

  7. Decision Analysis Science Modeling for Application and Fielding Selection Applied to Concrete Decontamination Technologies

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Ross, T.L.

    1998-01-01

    Concrete surfaces contaminated with radionuclides present a significant challenge during the decontamination and decommissioning (D and D) process. As structures undergo D and D, coating layers and/or surface layers of the concrete containing the contaminants must be removed for disposal in such a way as to present little to no risk to human health or the environment. The selection of a concrete decontamination technology that is safe, efficient, and cost-effective is critical to the successful D and D of contaminated sites. To support U.S. Department of Energy (DOE) Environmental Management objectives and to assist DOE site managers in the selection of the best-suited concrete floor decontamination technology(s) for a given site, two innovative and three baseline technologies have been assessed under standard, non-nuclear conditions at the Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU). The innovative technologies assessed include the Pegasus Coating Removal System and Textron's Electro-Hydraulic Scabbling System. The three baseline technologies assessed include: the Wheelabrator Blastrac model 1-15D, the NELCO Porta Shot Blast trademark model GPx-1O-18 HO Rider, and the NELCO Porta Shot Blasttrademark model EC-7-2. These decontamination technology assessments provide directly comparable performance data that have previously been available for only a limited number of technologies under restrictive site-specific constraints. Some of the performance data collected during these technology assessments include: removal capability, production rate, removal gap, primary and secondary waste volumes, and operation and maintenance requirements. The performance data generated by this project is intended to assist DOE site managers in the selection of the safest, most efficient, and cost-effective decontamination technologies to accomplish their remediation objectives

  8. Global Health as a Field of Power Relations: A Response to Recent Commentaries.

    Science.gov (United States)

    Shiffman, Jeremy

    2015-05-22

    Actors working in global health often portray it as an enterprise grounded in principled concerns, advanced by individuals and organizations who draw on scientific evidence to pursue health equity. This portrait is incomplete. It is also a field of power relations-a social arena in which actors claim and draw on expertise and moral authority to gain influence and pursue career, organizational and national interests. A clear understanding of how power operates in this field is necessary to ensure that it is used productively to serve the aims of health equity and improved population health. Responding to commentaries on an editorial published in this journal, I offer 3 ideas toward this end: (1) be skeptical of the global health rationality project-the effort to rescue the field from the alleged indignities of politics through the application of scientific methods; (2) analyze global health as a field of power relations, a concept developed by sociologist Pierre Bourdieu; and (3) elevate the place of input legitimacy-inclusive deliberation, fair process and transparency-to address legitimacy and knowledge deficits in this field. © 2015 by Kerman University of Medical Sciences.

  9. Innovations in fuel cells and related hydrogen technology in Norway – OECD Case Study in the Energy Sector

    OpenAIRE

    Godø, Helge; Nerdrum, Lars; Rapmund, Antje; Nygaard, Stian

    2003-01-01

    This report presents the results of an analysis undertaken by NIFU on innovations in fuel cells and related hydrogen technology in Norway. This country study is part of a larger effort jointly organized by the OECD’s Working Group on Technology and Innovation Policy (TIP) and IEA’s Committee on Energy Research and Technology. Organized as a Focus Group, a number of national case studies have been made on different energy technologies and energy sources, fuel cells and related hydrogen technol...

  10. Methodological Capacity within the Field of "Educational Technology" Research: An Initial Investigation

    Science.gov (United States)

    Bulfin, Scott; Henderson, Michael; Johnson, Nicola F.; Selwyn, Neil

    2014-01-01

    The academic study of educational technology is often characterised by critics as methodologically limited. In order to test this assumption, the present paper reports on data collected from a survey of 462 "research active" academic researchers working in the broad areas of educational technology and educational media. The paper…

  11. CURRENT DIRECTIONS OF RESEARCH IN INFORMATION- COMMUNICATION TECHNOLOGIES IN THE FIELD OF PEDAGOGICAL SCIENCE.

    Directory of Open Access Journals (Sweden)

    O.N. Spirin

    2010-11-01

    Full Text Available In the publication modern research areas of information-communication technologies in pedagogical science are identified. The basic requirements of the new passport for the specialty 13.00.10 - Information and Communication Technologies in Education are described. On this specialty the defence of the degree of doctor and candidate of pedagogical science may be carried out.

  12. Understanding Modelling in Technology and Science: The Potential of Stories from the Field

    Science.gov (United States)

    France, Bev; Compton, Vicki J.; Gilbert, John K.

    2011-01-01

    This paper tells the story of how two biotechnologists used models, one working as a technologist and the other as a scientist. These stories were collected during the development of the key ideas about the nature of technology and technological knowledge during the latest curriculum development in New Zealand. Their stories of how and why they…

  13. Psychological adaptation in the info-communication society: The revised version of Technology-Related Psychological Consequences Questionnaire.

    Directory of Open Access Journals (Sweden)

    Emelin V.A.

    2014-07-01

    Full Text Available The aim of the study is to consider technology-related changes in psychological needs and boundaries that affect one’s personal adaptation to the info-communication society, as well as how they relate to problematic or excessive technology use. Based on the psychological model of the consequences of technology use, we’ve picked two forms of technology use (one related to mobile phones and the other related to the Internet from a revised version of our Technology-Related Psychological Consequences Questionnaire. The new version includes nine questions: two assessing the excessive use of technology (the inability to resist using technology and subjective dependence, four assessing changes in psychological boundaries (boundaries extension and violation, easiness-related and opportunity-related preference for technology and the other three measuring technology-related needs (functionality, convenience and image making. In the normative sample (N=132, appropriate reliability, factor validity and convergent validity were demonstrated in comparisons to the picture measure of the technology-related boundaries change. Based on hierarchical regression and moderator analysis, it was shown that changes in psychological boundaries affect the excessive use of technology (explaining an additional 17-27% of the variance after adjusting for frequency of use and age group. The extension of boundaries and ease-of-use-related preference for mobile phones versus the Internet predicted satisfaction with life after adjusting for frequency of use, age group, inability to resist and subjective dependency respectively; however, the figures were not statistically significant. Thus, our data supports the hypothesis that there are different kinds of technology-related changes in psychological boundaries that manifest themselves in the subjective feeling of dependence on technology and the feeling that it is impossible to do without technology, which might in some cases

  14. IMS advances in studies of field-aligned currents and their related electrodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Kamide, Y.

    1985-12-01

    During the IMS period, there have been major advances in four areas regarding field-aligned currents which directly reflect the electrical coupling between the magnetosphere and the ionosphere. First, the spatial distribution of the large-scale field-aligned currents (in particular, their average configuration) has been extensively examined with respect to IMF (interplanetary magnetic field) parameters. The role of the field-aligned currents in the dayside polar cap including their IMF B/sub y/ dependence and seasonal dependence has been cleared to some extent. It remains to be answered, however, if the substorm pattern differs uniquely from the average disturbed pattern. Second, the three-dimensional current system has been studied by using satellite and ground-based, as well as radar, measurements. The nature of the substorm current system, which changes quite dynamically depending upon the different substorm phases as well as upon different auroral forms, has been more clearly defined. A third major advance has been in the efforts to find the relative location of the field-aligned currents to various ionospheric parameters, such as electric fields, conductivities, and discrete and diffuse auroras. Finally, numerical simulations of assumptions have increasingly become a powerful tool for the study of the dynamics of the magnetosphere-ionosphere system. It appears that the large-scale characteristics of the system under steady state conditions are known in the sense that the measured key parameters are mutually consistent for average data sets.

  15. Exposure of workers to the risks related to electromagnetic fields. Guide for risk assessment

    International Nuclear Information System (INIS)

    De Seze, Rene; Courtin, Claude; Gruet, Pierre; Becker, Thierry; Demaret, Philippe; Donati, Patrice; Ganem, Yael; Moureaux, Patrick; Bisseriex, Christian; Bonnet, Christian; Cabaret, Philippe; Castro, Helene; Laurent, Pierre; Le Berre, Guy; Marteau, Emmanuel; Tirlemont, Stephane

    2013-01-01

    This guide aims at helping companies to prevent risks related to worker exposure to electromagnetic fields, and at simplifying the assessment approach. After some generalities of electromagnetic fields (notions of electromagnetic spectrum, electric, magnetic and electromagnetic fields, wavelength and frequency, reactive near- or far-field area, work environment), this report describes the effect of an exposure with respect to frequencies (under 100 khz, over 10 MHz, between 100 khz and 10 MHz), recalls the regulation in occupational environment. It presents some generalities on exposure sources, and methods and ways for a simplified risk assessment (equipment inventory and characterization, CE-labelled equipment). It addresses various aspects of a deepened risk assessment: the exposure assessment (emitted field measurement, workstation analysis, maximum exposure, determination of exposure action level or VDA), the indirect effects (contact with a metallic object within the field, projection of ferromagnetic objects, initiation of firing electric devices, fires and explosions), and workers with specific risks (those bearing active implants or passive ferromagnetic implants, pregnant women). The last part addresses actions aimed at reducing the exposure. Eight industrial applications are more particularly addressed and discussed at the end of each chapter: induction-based devices (welding, fusion, heating, surface treatment, so on), magnetizers and demagnetizers, magneto-scopic devices, magnetic resonance imagery devices, electrolytic cells, heating or welding devices based on dielectric losses, and microwave ovens

  16. Relative contribution of ionospheric conductivity and electric field to the auroral electrojets

    International Nuclear Information System (INIS)

    Kamide, Y.; Vickrey, J.F.

    1983-01-01

    Data from continuous scans of the Chatanika radar beam along the magnetic meridian plane are used to the determine the latitudinal profile of height-integrated ionospheric conductivities and horizontal electric fields, from which the latitudinal distribution of ionospheric currents is deduced. The observations cover invariant latitudes between 62 0 and 68 0 , where the IMS Alaska meridian chain of magnetometers was also in operation. Although the conductivities and the electric fields are interrelated, the relative importance of the two in driving the eastward and westward auroral electrojet currents can be assessed. It is found that for moderate and large current densities (i.e., > or approx. =0.2 A/m), the northward electric field strength increases as the magnitude of the eastward electrojet in the evening sector increases. The height-integrated Hall conductivity stays generally at the level of 10 mhos even when the current density becomes as large as 1 A/m. However, when the eastward electrojet is small, substantial electric fields of 10-20 mV/m may still exist as if the magnetosphere has a persistent voltage source. There appear to be two distinct components to the westward electrojet. In the midnight and early morning sestors (>0300 MLT) intensity is characterized by a weak southward electric field and a high Hall conductivity, whereas its late morning portion (>0300 MLT) is dominated by a strong southward electric field

  17. New measurements of coil-related magnetic field errors on DIII-D

    Energy Technology Data Exchange (ETDEWEB)

    Luxon, J.L. E-mail: luxon@fusion.gat.com; Jackson, G.L.; Leuer, J.A.; Nagy, A.; Schaffer, M.J.; Scoville, J.T.; Strait, E.J

    2003-09-01

    Non-axisymmetric (error) fields in tokamaks lead to a number of instabilities including so-called locked modes [J.T. Scoville, R.J. La Haye, Nucl. Fusion 43 (4) (2003) 250-257] and resistive wall modes (RWM) [A.M. Garofab, R.J. La Haye, J.T. Scoville, Nucl. Fusion 42 (11) (2002) 1335-1339] and subsequent loss of confinement. They can also cause errors in magnetic measurements made by point probes near the plasma edge, error in measurements made by magnetic field sensitive diagnostics, and they violate the assumption of axisymmetry in the analysis of data. Most notably, the sources of these error fields include shifts and tilts in the coil positions from ideal, coil leads, and nearby ferromagnetic materials excited by the coils. New measurements have been made of the n=1 coil-related field errors in the DIII-D plasma chamber. These measurements indicate that the errors due to the plasma shaping coil system are smaller than previously reported and no additional sources of anomalous fields were identified. Thus they fail to support the suggestion of an additional significant error field suggested by locked mode and RWM experiments.

  18. Relations between decision indicators for implementing technology in healthcare logistics – a bed logistics case study

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    The cost of healthcare is rising and reforms have been introduced across Europe to address the cost issue in healthcare. There is potential to improve logistical processes within healthcare to save costs and at the same time provide services that support high quality patient care. Re......-designing processes and implementing technology can improve the efficiency of processes and reduce costs. A relations diagram has been developed that identifies the effects between the constructs Logistics, Technology, Procedure and Structure. Knowledge about how these constructs affect each other is important when...

  19. Using multimedia information and communication technology (ICT) to provide added value to reminiscence therapy for people with dementia : Lessons learned from three field studies.

    Science.gov (United States)

    Bejan, Alexander; Gündogdu, Ramazan; Butz, Katherina; Müller, Nadine; Kunze, Christophe; König, Peter

    2018-01-01

    In the care of people with dementia (PwD), occupational therapies and activities aiming at maintaining the quality of life of PwD, such as reminiscence therapy (RT), are taking on a more and more important role. Information and communication technology (ICT) has the potential to improve and to facilitate RT by facilitating access to and selection of biographical information and related contents or by providing novel multimodal interaction forms to trigger memories; however, interactive multimedia technology is barely used in practice. This article presents three exploratory field studies that evaluated different aspects of RT technology use for PwD in care homes, including the utilization of online movie databases, interactive surface touch computers as well as natural user interfaces allowing gestures and haptic interaction. In these studies, the usage of prototype systems was observed in occupational sessions by 5, 12 and 16 PwD. The results indicate positive effects of technology use, e. g. in the form of verbally elicited reminiscence statements, expressed joy and playful interaction. Lessons learned for the design of technology-based RT interventions are presented and discussed.

  20. Defibrillation success with high frequency electric fields is related to degree and location of conduction block.

    Science.gov (United States)

    Weinberg, Seth H; Chang, Kelly C; Zhu, Renjun; Tandri, Harikrishna; Berger, Ronald D; Trayanova, Natalia A; Tung, Leslie

    2013-05-01

    We recently demonstrated that high frequency alternating current (HFAC) electric fields can reversibly block propagation in the heart by inducing an oscillating, elevated transmembrane potential (Vm) that maintains myocytes in a refractory state for the field duration and can terminate arrhythmias, including ventricular fibrillation (VF). To quantify and characterize conduction block (CB) induced by HFAC fields and to determine whether the degree of CB can be used to predict defibrillation success. Optical mapping was performed in adult guinea pig hearts (n = 14), and simulations were performed in an anatomically accurate rabbit ventricular model. HFAC fields (50-500 Hz) were applied to the ventricles. A novel power spectrum metric of CB-the loss of spectral power in the 1-30 Hz range, termed loss of conduction power (LCP)-was assessed during the HFAC field and compared with defibrillation success and VF vulnerability. LCP increased with field strength and decreased with frequency. Optical mapping experiments conducted on the epicardial surface showed that LCP and the size of CB regions were significantly correlated with VF initiation and termination. In simulations, subsurface myocardial LCP and CB sizes were more closely correlated with VF termination than surface values. Multilinear regression analysis of simulation results revealed that while CB on both the surface and the subsurface myocardium was predictive, subsurface myocardial CB was the better predictor of defibrillation success. HFAC fields induce a field-dependent state of CB, and defibrillation success is related to the degree and location of the CB. Copyright © 2013. Published by Elsevier Inc.

  1. Perception and significance of an assistive technology intervention - the perspectives of relatives of persons with dementia.

    Science.gov (United States)

    Alwin, Jenny; Persson, Jan; Krevers, Barbro

    2013-08-01

    The aim of this study was to examine relatives' perception of an assistive technology intervention aimed at persons with dementia (PwDs) and their relatives, and to examine whether, and how, experiences of the intervention process differed between relatives valuing the intervention to be of high, and relatives perceiving it to be of low significance. A total of 47 relatives of PwDs within the Swedish Technology and Dementia project were interviewed telephonically using a modified version of the Patient perspective on Care and Rehabilitation process instrument. A total of 46 participants were divided into two groups depending on whether they valued the intervention to be of great significance (GS group; N = 33) or of some/no significance (SNS group; N = 13). Several aspects of the intervention were perceived as highly important, e.g. being shown consideration and respect, and having somewhere to turn. The results indicate that relatives in the GS group perceived certain aspects of the intervention process as highly fulfilled to a larger extent than did relatives in the SNS group. This study illustrates how process evaluations can be used to increase the understanding and to identify improvement aspects of interventions. Process evaluation is a good method for understanding how interventions can be improved - a keystone for quality work. Based on relatives' ratings, a high fulfilment of the AT intervention process was associated with the perception of a significant outcome of the intervention.

  2. Determination of the exposure to electromagnetic fields arising from radiofrequency identification technology (RFID) application. Final report

    International Nuclear Information System (INIS)

    Schmid, Gernot; Ueberbacher, Richard; Cecil, Stefan; Escorihuela-Navarro, Ana; Sainitzer, David; Weinfurter, Andreas

    2012-01-01

    antennas closer than 20 cm. Regarding UHF (868 MHz) and microwave (2,45 GHz) reader devices it was demonstrated that exposure above the basic restriction is not to be expected as long as a minimum distance to the antennas of 10 cm - 20 cm is maintained. Concerning exposure from currently widest deployed Electronic Article Surveillance (EAS) technology also differences between technologies become obvious. While the numerous measurements and computations carried out did not give indications that radio frequency (RF)-EAS devices (operating frequency range typically 7,5-8,9 MHz) cause exposure above the basic restrictions defined in ICNIRP 1998, it could be demonstrated that for acoustomagnetic (AM)-EAS systems (operating frequency 58 kHz) exposure above the ICNIRP 1998 basic restrictions is possible, when approaching the antenna very closely, i.e., at unusual short distances of less than a few centimeters between the trunk and/or the head and the antenna. With respect to the assessment of the exposure caused by the RFID- and EAS devices with operating frequencies less than 10 MHz (particularly close to and below 100 kHz), it must be noted that the assessment summarized above was carried out based on the ICNIRP guidelines published in 1998, i.e., that the basic restriction in terms of current density was applied only to central nervous (CNS) tissue. It must be expected that the application of the new assessment concept recently published by ICNIRP 2010, which is based of induced electric field strength inside the tissue and which provides now also limits for all body tissues and not only for CNS tissue, may lead to significant different assessment results and conclusions for the mentioned device categories. Regarding possible electromagnetic interference with cardiac pacemakers, again RFID- and EAS-devices with working frequencies 58 kHz and 120 kHz and large (e.g., floor standing) antennas showed up to have the highest potential for interference compared to the other

  3. Decision Analysis Science Modeling for Application and Fielding Selection Applied to Equipment Dismantlement Technologies. Final Report January 1998

    International Nuclear Information System (INIS)

    Lagos, L.E.; Ebadian, M.A.

    1998-01-01

    During the decontamination and decommissioning (D and D) activities being conducted by the U.S. Department of Energy (DOE), approximately 550,000 metric tons of contaminated metal will be generated by the disposition of contaminated buildings. The majority of the structural steel is considered to be radiologically contaminated. The D and D activities require the treatment of the structural steel to reduce occupational and environmental radiological exposures during dismantlement. Treatment technologies may also be required for possible recycling. Many proven commercial treatment technologies are available. These treatment processes vary in aggressiveness, safety requirements, secondary waste generation, necessary capital, and operation and maintenance costs. Choosing the appropriate technology to meet the decontamination objectives for structural steel is a difficult process. A single information source comparing innovative and nuclear and non-nuclear technologies in the areas of safety, cost and effectiveness is not currently commercially available to perform a detailed analysis. This study presents comparable data related to operation and maintenance, cost, and health and safely aspects of three readily available technologies and one innovative technology for nuclear decontamination. The technologies include Advance Recyclable Media System (ARMStrademark), NELCO Porta Shot Blasttrademark (JHJ-2000), Pegasus Coating Removal System 7 (PCRS-7) and the innovative laser ablation technology called the Yag Erasertrademark

  4. Field demonstration and transition of SCAPS direct push VOC in-situ sensing technologies

    International Nuclear Information System (INIS)

    Davis, William M.

    1999-01-01

    This project demonstrated two in-situ volatile organic compound (VOC) samplers in combination with the direct sampling ion trap mass spectrometer (DSITMS). The technologies chosen were the Vadose Sparge and the Membrane Interface Probe (MIP) sensing systems. Tests at two demonstration sites showed the newer VOC technologies capable of providing in situ contaminant measurements at two to four times the rate of the previously demonstrated Hydrosparge sensor. The results of this project provide initial results supporting the utility of these new technologies to provide rapid site characterization of VOC contaminants in the subsurface

  5. Field demonstration and transition of SCAPS direct push VOC in-situ sensing technologies

    Energy Technology Data Exchange (ETDEWEB)

    William M. Davis

    1999-11-03

    This project demonstrated two in-situ volatile organic compound (VOC) samplers in combination with the direct sampling ion trap mass spectrometer (DSITMS). The technologies chosen were the Vadose Sparge and the Membrane Interface Probe (MIP) sensing systems. Tests at two demonstration sites showed the newer VOC technologies capable of providing in situ contaminant measurements at two to four times the rate of the previously demonstrated Hydrosparge sensor. The results of this project provide initial results supporting the utility of these new technologies to provide rapid site characterization of VOC contaminants in the subsurface.

  6. Consumer perception of the use of high-pressure processing and pulsed electric field technologies in food production.

    Science.gov (United States)

    Nielsen, Henriette Boel; Sonne, Anne-Mette; Grunert, Klaus G; Banati, Diana; Pollák-Tóth, Annamária; Lakner, Zoltán; Olsen, Nina Veflen; Zontar, Tanja Pajk; Peterman, Marjana

    2009-02-01

    The success of new food processing technologies is highly dependent on consumers' acceptance. The purpose of this paper is to study consumers' perceptions of two new processing technologies and food products produced by means of these novel technologies. To accomplish this, a qualitative study on consumer attitudes towards high-pressure processing (HPP) and pulsed electric field (PEF) processing of food was carried out. In all 97 adults between 20 and 71 years of age participated in 12 focus groups conducted in Slovenia, Hungary, Serbia, Slovakia, Norway and Denmark using a common guideline. Participants were introduced to the HPP and PEF technologies and then to the effect of the two new technologies on two specific product categories: juice and baby food. The transcribed data was content analysed and the coded data was transformed into diagrams using UCINET 5 and NETDRAW. The results show that consumers perceived the main advantages of HPP and PEF products to be the products' naturalness, improved taste and their high nutritional value, whereas the main disadvantage was the lack of information about the PEF and HPP products. The results of the participants' evaluation of the PEF and HPP processes showed that environmental friendliness and the more natural products were seen as the main advantages, while they were concerned about body and health, the higher price of the products, the lack of information about the technologies and a general scepticism. The study also shows that North European participants were a bit more sceptical towards PEF and HPP products than the East European participants.

  7. Identifying Future Training Technology Opportunities Using Career Field Models and Simulations

    National Research Council Canada - National Science Library

    Bennett, Jr., Winston; Stone, Brice; Turner, Kathryn; Ruck, Hendrick W

    2002-01-01

    ... itself. This report presents results from a recent application of a career field education and training planning simulation capability to identify cost-effective opportunities for the introduction...

  8. Active assistance technology for health-related behavior change: an interdisciplinary review.

    Science.gov (United States)

    Kennedy, Catriona M; Powell, John; Payne, Thomas H; Ainsworth, John; Boyd, Alan; Buchan, Iain

    2012-06-14

    Information technology can help individuals to change their health behaviors. This is due to its potential for dynamic and unbiased information processing enabling users to monitor their own progress and be informed about risks and opportunities specific to evolving contexts and motivations. However, in many behavior change interventions, information technology is underused by treating it as a passive medium focused on efficient transmission of information and a positive user experience. To conduct an interdisciplinary literature review to determine the extent to which the active technological capabilities of dynamic and adaptive information processing are being applied in behavior change interventions and to identify their role in these interventions. We defined key categories of active technology such as semantic information processing, pattern recognition, and adaptation. We conducted the literature search using keywords derived from the categories and included studies that indicated a significant role for an active technology in health-related behavior change. In the data extraction, we looked specifically for the following technology roles: (1) dynamic adaptive tailoring of messages depending on context, (2) interactive education, (3) support for client self-monitoring of behavior change progress, and (4) novel ways in which interventions are grounded in behavior change theories using active technology. The search returned 228 potentially relevant articles, of which 41 satisfied the inclusion criteria. We found that significant research was focused on dialog systems, embodied conversational agents, and activity recognition. The most covered health topic was physical activity. The majority of the studies were early-stage research. Only 6 were randomized controlled trials, of which 4 were positive for behavior change and 5 were positive for acceptability. Empathy and relational behavior were significant research themes in dialog systems for behavior change, with

  9. Secondary carbonate porosity as related to early teritiary depositional facies, Zelten field, Libya

    Energy Technology Data Exchange (ETDEWEB)

    Bebout, D.G.; Pendexter, C.

    1975-04-01

    Production from the Zelten field, Libya, is from the highly porous shelf limestones of the Zelten Member (Main Pay) of the Paleocene and lower Eocene Ruaga Limestone. Fifteen facies are recognized, mapped, and predicted. Seven of the facies comprise the larger part of the Zelten Member. These include miliolid-foraminiferal micrite, argillaceous bryozoan/echinoid micrite, argillaceous-molluscan micrite, coralgal micrite. Discocyclina-foraminiferal calcarenite, foraminiferal calcarenite and micrite, and Discocyclina-foraminiferal micrite. In the Zelten field secondary porosity is recorded as much as 40%; this porosity is related to the original depositional fabric of the sediment and, therefore, is facies controlled. Porosity is highest in the coralgal micrite and Discocyclina-foraminiferal calcarenite, which together form a NW.-SE. trend across the N. part of the field, and in the formaniniferal calcarenite and micrite. (10 refs.)

  10. Relative vegetation profiles in a Neotropical forest: comparison of lidar instrumentation and field-based measurements

    Science.gov (United States)

    Sullivan, F. B.; Palace, M. W.; Ducey, M.; Czarnecki, C.; Zanin Shimbo, J.; Mota e Silva, J.

    2012-12-01

    Tropical forests are considered to be some of the most structurally complex forests in the world. Understanding vegetation height structure in these forests can aid in understanding the spatial temporal components of disturbance, from blowdowns to gap dynamics. Vegetation profiles can be used to better estimate carbon storage and flux across the landscape. Using light detection and ranging (lidar) data collected at La Selva, Costa Rica from four instruments (three airborne, one terrestrial) at four times since 2005, and field data collected in January 2012, we generated relative vegetation profiles for twenty plots in La Selva. Relative vegetation profiles were derived from lidar data by accounting for obscured plant material through a log transformation of the cumulative proportion of observations (percent canopy closure). Profiles were derived from field data using two different sets of allometric equations describing crown shape and tree height. We conducted a cluster analysis on similarity matrices developed in R (version 2.14.1) using three different metrics (sum of squares, Kullback-Leibler divergence, Kolmogorov-Smirnov D statistic) and identified general similarity between lidar profiles. Results were consistent across each of the three similarity metrics. Three distinct clusters were found, with profiles from three airborne lidar instruments, two profiles from a terrestrial lidar instrument, and profiles derived from field data forming the clusters. Our results indicate that although estimating lidar relative vegetation profiles from field data was not possible, terrestrial lidar relative vegetation profiles are generally similar to airborne relative vegetation profiles. Given the rapidity and repeatability of terrestrial lidar measurements, these results show promise for terrestrial lidar instruments to collect plot-specific data on forest structure and vertical distribution of plant material. Furthermore, identifying relationships between terrestrial and

  11. Nonlinear approaches in engineering applications advanced analysis of vehicle related technologies

    CERN Document Server

    Dai, Liming

    2016-01-01

    This book looks at the broad field of engineering science through the lens of nonlinear approaches. Examples focus on issues in vehicle technology, including vehicle dynamics, vehicle-road interaction, steering, and control for electric and hybrid vehicles. Also included are discussions on train and tram systems, aerial vehicles, robot-human interaction, and contact and scratch analysis at the micro/nanoscale. Chapters are based on invited contributions from world-class experts in the field who advance the future of engineering by discussing the development of more optimal, accurate, efficient, and cost and energy effective systems. This book is appropriate for researchers, students, and practicing engineers who are interested in the applications of nonlinear approaches to solving engineering and science problems.

  12. Research Progress on 3D Printed Graphene Materials Synthesis Technology and Its Application in Energy Storage Field

    Directory of Open Access Journals (Sweden)

    WANG Nan

    2017-12-01

    Full Text Available Graphene is an ideal material for energy storage application as its excellent mechanical and physical properties. 3D printed graphene materials will be widely applied in energy storage field for its precisely controllable structure and it is easy to realize large-scale preparation. In this paper, the progress of 3D printed graphene materials synthesis technology and its application in energy storage field were reviewed. The viscosity and printability of graphene ink are key factors for realizing graphene 3D printing. Scalable preparation of graphene ink with facile process, controllable concentration and additive free will be the research focus of graphene 3D printing technologies in the future. The integrated printing of graphene energy storage devices such as graphene supercapacitor, lithium-sulfur battery and lithium ion battery is the development direction in this area.

  13. Field and laboratory notes on instream research - Research and Development of New Marking and Monitoring Technologies

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project addresses how to expand the current fish-tracking technologies to enable the fisheries community to successfully carry out the actions, research, and...

  14. FIELD MEASUREMENT TECHNOLOGY FOR MERCURY IN SOIL AND SEDIMENT MTI INC'S PDV 6000 STRIPPING VOLTAMMETRY

    Science.gov (United States)

    Monitoring Technologies International Pty. Ltd. (MTI) has developed a Portable Digital Voltammeter (PDV) designed to identify and measure the concentration of heavy metal ions. MTI's PDV 6000 was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Tec...

  15. RESOURCE-SAVING PROCESS AND RESOURCE-SAVING TECHNOLOGIES IN THE FIELD OF ECOLOGICAL TOURISM

    Directory of Open Access Journals (Sweden)

    K. D. Nikolaiev

    2009-03-01

    Full Text Available Saving of resources and some resources-saving technologies, the use of which in eco-touristic sphere will bring the possibility of development with the least pressure upon the environment, are considered in this article.

  16. [Health-related scientific and technological capabilities and university-industry research collaboration].

    Science.gov (United States)

    Britto, Jorge; Vargas, Marco Antônio; Gadelha, Carlos Augusto Grabois; Costa, Laís Silveira

    2012-12-01

    To examine recent developments in health-related scientific capabilities, the impact of lines of incentives on reducing regional scientific imbalances, and university-industry research collaboration in Brazil. Data were obtained from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (Brazilian National Council for Scientific and Technological Development) databases for the years 2000 to 2010. There were assessed indicators of resource mobilization, research network structuring, and knowledge transfer between science and industry initiatives. Based on the regional distribution map of health-related scientific and technological capabilities there were identified patterns of scientific capabilities and science-industry collaboration. There was relative spatial deconcentration of health research groups and more than 6% of them worked in six areas of knowledge areas: medicine, collective health, dentistry, veterinary medicine, ecology and physical education. Lines of incentives that were adopted from 2000 to 2009 contributed to reducing regional scientific imbalances and improving preexisting capabilities or, alternatively, encouraging spatial decentralization of these capabilities. Health-related scientific and technological capabilities remain highly spatially concentrated in Brazil and incentive policies have contributed to reduce to some extent these imbalances.

  17. Testing of Commercial Milk Production Technology Using A Combination of High Temperature Short Time and Pulsed Electric Field

    OpenAIRE

    Hadi A; Widjanarko SB; Kusnadi J

    2016-01-01

    The development of milk processing technology has grown excessively, and it contains advantage and disadvantage. This study used mixed between PEF (Pulsed Electric Field) and High Temperature Short Time (HTST) to produce milk processed product which is effective and efficient in killing milk microorganism without changing its color, scent, and nutrient content of processed product, therefore producing commercial sterile milk product in accord with milk Indonesian National Standard (SNI). The ...

  18. Global Health as a Field of Power Relations: A Response to Recent Commentaries

    Science.gov (United States)

    Shiffman, Jeremy

    2015-01-01

    Actors working in global health often portray it as an enterprise grounded in principled concerns, advanced by individuals and organizations who draw on scientific evidence to pursue health equity. This portrait is incomplete. It is also a field of power relations—a social arena in which actors claim and draw on expertise and moral authority to gain influence and pursue career, organizational and national interests. A clear understanding of how power operates in this field is necessary to ensure that it is used productively to serve the aims of health equity and improved population health. Responding to commentaries on an editorial published in this journal, I offer 3 ideas toward this end: (1) be skeptical of the global health rationality project—the effort to rescue the field from the alleged indignities of politics through the application of scientific methods; (2) analyze global health as a field of power relations, a concept developed by sociologist Pierre Bourdieu; and (3) elevate the place of input legitimacy—inclusive deliberation, fair process and transparency—to address legitimacy and knowledge deficits in this field. PMID:26188819

  19. A soil technological study on effectuating and maintaining adequate playing conditions of grass sports fields

    NARCIS (Netherlands)

    Wijk, van A.L.M.

    1980-01-01

    Playing conditions of grass sports fields have been studied focusing on top layer soil strength meeting the requirements of usage. In a field investigation a reproducible soil strength criterion was found from firmness appraisals and simultaneous measurements of soil strength. From

  20. Science and technology related global problems: An international survey of science educators

    Science.gov (United States)

    Bybee, Rodger W.; Mau, Teri

    This survey evaluated one aspect of the Science-Technology-Society theme, namely, the teaching of global problems related to science and technology. The survey was conducted during spring 1984. Two hundred sixty-two science educators representing 41 countries completed the survey. Response was 80%. Findings included a ranking of twelve global problems (the top six were: World Hunger and Food Resources, Population Growth, Air Quality and Atmosphere, Water Resources, War Technology, and Human Health and Disease). Science educators generally indicated the following: the science and technology related global problems would be worse by the year 2000; they were slightly or moderately knowledgeable about the problems; print, audio-visual media, and personal experiences were their primary sources of information; it is important to study global problems in schools; emphasis on global problems should increase with age/grade level; an integrated approach should be used to teach about global problems; courses including global problems should be required of all students; most countries are in the early stages of developing programs including global problems; there is a clear trend toward S-T-S; there is public support for including global problems; and, the most significant limitations to implementation of the S-T-S theme (in order of significance) are political, personnel, social, psychological, economic, pedagogical, and physical. Implications for research and development in science education are discussed.