The Perceived Effect of Hidden Costs on the Operational Management of Information Technology Outsourcing: A Qualitative Study

Science.gov (United States)

Swift, Ian

2011-01-01

Information technology (IT) outsourcing is a business trend aimed at reducing costs and enabling companies to concentrate on their core competencies. This qualitative multiple case design research study explored the effects of hidden costs on the operational management of IT outsourcing. The study involved analyzing IT outsourcing agreements as…

Laser illuminated flat panel display

Energy Technology Data Exchange (ETDEWEB)

Veligdan, J.T.

1995-12-31

A 10 inch laser illuminated flat panel Planar Optic Display (POD) screen has been constructed and tested. This POD screen technology is an entirely new concept in display technology. Although the initial display is flat and made of glass, this technology lends itself to applications where a plastic display might be wrapped around the viewer. The display screen is comprised of hundreds of planar optical waveguides where each glass waveguide represents a vertical line of resolution. A black cladding layer, having a lower index of refraction, is placed between each waveguide layer. Since the cladding makes the screen surface black, the contrast is high. The prototype display is 9 inches wide by 5 inches high and approximately I inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

Visible Wavelength Color Filters Using Dielectric Subwavelength Gratings for Backside-Illuminated CMOS Image Sensor Technologies.

Science.gov (United States)

Horie, Yu; Han, Seunghoon; Lee, Jeong-Yub; Kim, Jaekwan; Kim, Yongsung; Arbabi, Amir; Shin, Changgyun; Shi, Lilong; Arbabi, Ehsan; Kamali, Seyedeh Mahsa; Lee, Hong-Seok; Hwang, Sungwoo; Faraon, Andrei

2017-05-10

We report transmissive color filters based on subwavelength dielectric gratings that can replace conventional dye-based color filters used in backside-illuminated CMOS image sensor (BSI CIS) technologies. The filters are patterned in an 80 nm-thick poly silicon film on a 115 nm-thick SiO 2 spacer layer. They are optimized for operating at the primary RGB colors, exhibit peak transmittance of 60-80%, and have an almost insensitive response over a ± 20° angular range. This technology enables shrinking of the pixel sizes down to near a micrometer.

Combined mask and illumination scheme optimization for robust contact patterning on 45nm technology node flash memory devices

Science.gov (United States)

Vaglio Pret, Alessandro; Capetti, Gianfranco; Bollin, Maddalena; Cotti, Gina; De Simone, Danilo; Cantù, Pietro; Vaccaro, Alessandro; Soma, Laura

2008-03-01

Immersion Lithography is the most important technique for extending optical lithography's capabilities and meeting the requirements of Semiconductor Roadmap. The introduction of immersion tools has recently allowed the development of 45nm technology node in single exposure. Nevertheless the usage of hyper-high NA scanners (NA > 1), some levels still remain very critical to be imaged with sufficient process performances. For memory devices, contact mask is for sure the most challenging layer. Aim of this paper is to present the lithographic assessment of 193nm contact holes process, with k I value of ~0.30 using NA 1.20 immersion lithography (minimum pitch is 100nm). Different issues will be reported, related to mask choices (Binary or Attenuated Phase Shift) and illuminator configurations. First phase of the work will be dedicated to a preliminary experimental screening on a simple test case in order to reduce the variables in the following optimization sections. Based on this analysis we will discard X-Y symmetrical illuminators (Annular, C-Quad) due to poor contrast. Second phase will be dedicated to a full simulation assessment. Different illuminators will be compared, with both mask type and several mask biases. From this study, we will identify some general trends of lithography performances that can be used for the fine tuning of the RET settings. The last phase of the work will be dedicated to find the sensitivity trends for one of the analyzed illuminators. In particular we study the effect of Numerical Aperture, mask bias in both X and Y direction and poles sigma ring-width and centre.

Illuminating the Psychological Experience of Elderly Loneliness from a Societal Perspective: A Qualitative Study of Alienation between Older People and Society.

Science.gov (United States)

Wong, Anna; Chau, Anson K C; Fang, Yang; Woo, Jean

2017-07-21

Loneliness is a common experience among older people that is associated with health risks and negative well-being. As a psychological phenomenon, it has typically been defined in Western research literature as the discrepancy between desired and actual interpersonal relations. In our qualitative study in Hong Kong, we offer insight into ageing and loneliness in an urban environment of the non-Western world and propose to reconceptualise loneliness by exploring older people's experience of alienation at the societal level as an important but often neglected dimension of their loneliness. Thirty-seven community-dwelling, Chinese adults aged 65 and above were interviewed in focus groups and their accounts analysed and interpreted using a phenomenological approach. Findings revealed that focus group participants perceived insufficient care for older people, a growing distance between themselves and society, and their disintegrating identity in society to be primary sources of societal alienation. In response, older people adopted a more passive lifestyle, attributed marginalisation and inequality to old age, and developed negative feelings including unease towards ageing, vulnerability and helplessness, and anger. The emergence of these key components and underlying themes of societal alienation illuminated neglected facets of the psychological phenomenon of loneliness and highlighted new implications for policy, practice, and research from a societal perspective to address older people's loneliness in urban settings.

Approaches, techniques, and information technology systems in the restaurants and foodservice industry: a qualitative study in sales forecasting.

OpenAIRE

Green, Yvette N. J.; Weaver, Pamela A.

2008-01-01

This is a study of the approaches, techniques, and information technology systems utilized for restaurant sales forecasting in the full-service restaurant segment. Companies were examined using a qualitative research methods design and long interviews to gather information on approaches, techniques, and technology systems utilized in the sales forecasting process. The results of the interviews were presented along with ensuing discussion.

Impact of wearable technology on psychosocial factors of osteoarthritis management: a qualitative study.

Science.gov (United States)

Belsi, Athina; Papi, Enrica; McGregor, Alison H

2016-02-03

To identify the impact the use of wearable technology could have in patients with osteoarthritis in terms of communication with healthcare providers and patients' empowerment to manage their condition. Qualitative study using focus groups with patients with osteoarthritis; data from patients' responses were analysed using Framework Methodology. 21 patients with knee osteoarthritis from the London area (age range 45-65 years) participated in a total of four focus groups. Recruitment continued until data saturation. The study was conducted in a university setting. Patients' responses suggested a positive attitude on the impact wearable technology could have on the management of osteoarthritis. It was perceived that the use of wearable devices would benefit patients in terms of feeling in control of their condition, providing them with awareness of their progress, empowering in terms of self-management and improving communication with their clinician. This paper suggests positive patient perspectives on the perceived benefits wearable technology could have on the management of osteoarthritis. The data that could be collected with the use of wearable technology could be beneficial both to patients and clinicians. The information obtained from this study suggests that introducing wearable technology into patient-centred care could enhance patient experience in the field of osteoarthritis and beyond. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Analysis of different technologies of artificial illumination for production of chrysanthemum in protecting environment; Analise de diferentes tecnologias de iluminacao artificial para producao de crisantemos em ambiente protegido

Energy Technology Data Exchange (ETDEWEB)

David, Eduardo; Rossi, Luiz Antonio [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola. Dept. de Engenharia Agricola], Emails: eduardo.david@gr.unicamp.br, rossi@agr.unicamp.br

2006-07-01

In protecting environment chrysanthemum's production, the artificial illumination type used to induce the photo period, affects the growing and development of plants, as well the electric power consumed in this process of production. The most useful illumination type is by filament. Today, new artificial illumination technologies have been studied to reduce the electric power consumption. This work has been development in a commercial greenhouse with four varieties. The preliminary results have showed that the utilization of discharge lamps does not affect significantly the flower's development considering the weight and presence of flower bud. In the analyzed period, the reduction on power electricity consumption was 60,13% on the sodium-vapor lamp, 41,66% on the mercury-vapor lamp, 60,52% on the fluorescent tube lamp and 50,32% on the compact fluorescent-integrated lamp in comparison with the incandescent lamp that nowadays it is used. It shows the high intensity discharge technology (HID technology) has saved more electricity than the incandescent lamp. (author)

Surface color perception under two illuminants: the second illuminant reduces color constancy

Science.gov (United States)

Yang, Joong Nam; Shevell, Steven K.

2003-01-01

This study investigates color perception in a scene with two different illuminants. The two illuminants, in opposite corners, simultaneously shine on a (simulated) scene with an opaque dividing wall, which controls how much of the scene is illuminated by each source. In the first experiment, the height of the dividing wall was varied. This changed the amount of each illuminant reaching objects on the opposite side of the wall. Results showed that the degree of color constancy decreased when a region on one side of the wall had cues to both illuminants, suggesting that cues from the second illuminant are detrimental to color constancy. In a later experiment, color constancy was found to improve when the specular highlight cues from the second illuminant were altered to be consistent with the first illuminant. This corroborates the influence of specular highlights in surface color perception, and suggests that the reduced color constancy in the first experiment is due to the inconsistent, though physically correct, cues from the two illuminants.

Application of spectroscopic techniques to the study of illuminated manuscripts: A survey

International Nuclear Information System (INIS)

Pessanha, S.; Manso, M.; Carvalho, M.L.

2012-01-01

This work focused on the application of the most relevant spectroscopic techniques used for the characterization of illuminated manuscripts. The historical value of these unique and invaluable artworks, together with the increased awareness concerning the conservation of cultural heritage, prompted the application of analytical techniques to the study of these illuminations. This is essential for the understanding of the artist's working methods, which aids conservation–restoration. The characterization of the pigments may also help assign a probable date to the manuscript. For these purposes, the spectroscopic techniques used so far include those that provide information on the elemental content: X-ray fluorescence, total reflection X-ray fluorescence and scanning electron microscopy coupled with energy-dispersive spectroscopy and laser-induced breakdown spectroscopy. Complementary techniques, such as X-ray diffraction, Fourier transform infrared and Raman spectroscopy, reveal information regarding the compounds present in the samples. The techniques, suitability, technological evolution and development of high-performance detectors, as well as the possibility of microanalysis and the higher sensitivity of the equipment, will also be discussed. Furthermore, issues such as the necessity of sampling, the portability of the equipment and the overall advantages and disadvantages of different techniques will be analyzed. - Highlights: ► The techniques used for studying illuminated manuscripts are described and compared. ► For in situ, non-destructive analysis the most suitable technique is EDXRF. ► For quantitative analysis TXRF is more appropriate. ► Raman spectroscopy is mostly used for pigments identification. ► FTIR was used for the characterization of binders and parchment.

Healthy competition: A qualitative study investigating persuasive technologies and the gamification of cycling.

Science.gov (United States)

Barratt, Paul

2017-07-01

Changing socio-technical practices occurring within cycling are leading the pursuit, and its participants, to become ever more embedded into the networked digital world. GPS enabled mobile-technologies have introduced a new element of competition into recreational riding, whether on the road, competing over timed virtual segments, or online dissecting and comparing the data that has been logged and shared via dedicated ride-logging applications. In order to understand these technologies qualitative study using reflective diaries and semi-structured interviews has been conducted with experienced club cyclists who had fully experienced the effects of their arrival. These riders claim that the applications influence their route choice and motivate them to cycle more frequently, and at a greater intensity although the engagement changes over time. This paper explores how this increased motivation to exercise and compete is instigated, manifested and maintained in the everyday practices of cyclists, as well as the negative consequences of gamification. Copyright © 2016 Elsevier Ltd. All rights reserved.

Technological Health Intervention in Population Aging to Assist People to Work Smarter not Harder: Qualitative Study

Science.gov (United States)

2018-01-01

Background Technology-based health care has been promoted as an effective tool to enable clinicians to work smarter. However, some health stakeholders believe technology will compel users to work harder by creating extra work. Objective The objective of this study was to investigate how and why electronic health (eHealth) has been applied in Taiwan and to suggest implications that may inspire other countries facing similar challenges. Methods A qualitative methodology was adopted to obtain insightful inputs from deeper probing. Taiwan was selected as a typical case study, given its aging population, advanced technology, and comprehensive health care system. This study investigated 38 stakeholders in the health care ecosystem through in-depth interviews and focus groups, which provides an open, flexible, and enlightening way to study complex, dynamic, and interactive situations through informal conversation or a more structured, directed discussion. Results First, respondents indicated that the use of technology can enable seamless patient care and clinical benefits such as flexibility in time management. Second, the results suggested that a leader’s vision, authority, and management skills might influence success in health care innovation. Finally, the results implied that both internal and external organizational governance are highly relevant for implementing technology-based innovation in health care. Conclusions This study provided Taiwanese perspectives on how to intelligently use technology to benefit health care and debated the perception that technology prevents human interaction between clinicians and patients. PMID:29301736

Analyzing nitrogen concentration using carrier illumination (CI) technology for DPN ultra-thin gate oxide

International Nuclear Information System (INIS)

Li, W.S.; Wu, Bill; Fan, Aki; Kuo, C.W.; Segovia, M.; Kek, H.A.

2005-01-01

Nitrogen concentration in the gate oxide plays a key role for 90 nm and below ULSI technology. Techniques like secondary ionization mass spectroscopy (SIMS) and X-ray photoelectron spectroscopy (XPS) are commonly used for understanding N concentration. This paper describes the application of the carrier illuminationTM (CI) technique to measure the nitrogen concentration in ultra-thin gate oxides. A set of ultra-thin gate oxide wafers with different DPN (decoupled plasma nitridation) treatment conditions were measured using the CI technique. The CI signal has excellent correlation with the N concentration as measured by XPS

Ultra Deep Wave Equation Imaging and Illumination

Energy Technology Data Exchange (ETDEWEB)

Alexander M. Popovici; Sergey Fomel; Paul Sava; Sean Crawley; Yining Li; Cristian Lupascu

2006-09-30

In this project we developed and tested a novel technology, designed to enhance seismic resolution and imaging of ultra-deep complex geologic structures by using state-of-the-art wave-equation depth migration and wave-equation velocity model building technology for deeper data penetration and recovery, steeper dip and ultra-deep structure imaging, accurate velocity estimation for imaging and pore pressure prediction and accurate illumination and amplitude processing for extending the AVO prediction window. Ultra-deep wave-equation imaging provides greater resolution and accuracy under complex geologic structures where energy multipathing occurs, than what can be accomplished today with standard imaging technology. The objective of the research effort was to examine the feasibility of imaging ultra-deep structures onshore and offshore, by using (1) wave-equation migration, (2) angle-gathers velocity model building, and (3) wave-equation illumination and amplitude compensation. The effort consisted of answering critical technical questions that determine the feasibility of the proposed methodology, testing the theory on synthetic data, and finally applying the technology for imaging ultra-deep real data. Some of the questions answered by this research addressed: (1) the handling of true amplitudes in the downward continuation and imaging algorithm and the preservation of the amplitude with offset or amplitude with angle information required for AVO studies, (2) the effect of several imaging conditions on amplitudes, (3) non-elastic attenuation and approaches for recovering the amplitude and frequency, (4) the effect of aperture and illumination on imaging steep dips and on discriminating the velocities in the ultra-deep structures. All these effects were incorporated in the final imaging step of a real data set acquired specifically to address ultra-deep imaging issues, with large offsets (12,500 m) and long recording time (20 s).

Adapting qualitative research strategies to technology savvy adolescents.

Science.gov (United States)

Mason, Deanna Marie; Ide, Bette

2014-05-01

To adapt research strategies involving adolescents in a grounded theory qualitative research study by conducting email rather than face-to-face interviews. Adolescent culture relies heavily on text-based communication and teens prefer interactions mediated through technology. Traditional qualitative research strategies need to be rethought when working with adolescents. Adapting interviewing strategies to electronic environments is timely and relevant for researching adolescents. Twenty three adolescents (aged 16-21) were interviewed by email. A letter of invitation was distributed. Potential participants emailed the researcher to convey interest in participating. If the inclusion criteria were met, email interviews were initiated. Participants controlled the interviews through their rate of response to interview questions. A grounded theory methodology was employed. Initial contact with participants reiterated confidentiality and the ability to withdraw from the study at any time. Interviews began with the collection of demographic information and a broad opening based on a semi-structured interview guide. All data were permissible, including text, photos, music, videos or outside media, for example YouTube. The participant was allowed to give direction to the interview after initial questions were posed. Email interviews continued until saturation was reached in the data. Participants were enthusiastic about email interviewing. Attrition did not occur. Email interviewing gave participants more control over the research, decreased power differentials between the adolescent and researcher, allowed the study to be adapted to cultural, linguistic and developmental needs, and maintained confidentiality. As participants said that email communication was slow and they preferred instant messaging, replication in faster-paced media is recommended. Repetition in face-to-face settings is warranted to evaluate how technology may have influenced the findings. Implications for

Technology use in linking criminal justice reentrants to HIV care in the community: a qualitative formative research study.

Science.gov (United States)

Peterson, James; Cota, Michelle; Gray, Holly; Bazerman, Lauri; Kuo, Irene; Kurth, Ann; Beckwith, Curt

2015-01-01

Innovative interventions increasing linkage, adherence, and retention in care among HIV-infected persons in the criminal justice system are needed. The authors conducted a qualitative study to investigate technology-based tools to facilitate linkage to community-based care and viral suppression for HIV-infected jail detainees on antiretroviral medications being released to the community. The authors conducted 24 qualitative interview-12 in Rhode Island and 12 in Washington, DC-among recently incarcerated HIV-infected persons to elicit their perceptions on the use of technology tools to support linkage to HIV care among criminal justice populations. This article discusses participants' perceptions of the acceptability of technological tools such as (a) a computer-based counseling and (b) text messaging interventions. The participants reported positive experiences when previewing the technology-based tools to facilitate linkage to HIV care and adherence to HIV medications. Successful linkage to care has been shown to improve HIV-associated and non-HIV-associated health outcomes, as well as prevent criminal recidivism and facilitate reentrants' successful and meaningful transition. These findings can be used to inform the implementation of interventions aimed at promoting adherence to antiretroviral medications and linkage to care for HIV-infected persons being released from the correctional setting.

An explorative chemometric approach applied to hyperspectral images for the study of illuminated manuscripts

Science.gov (United States)

Catelli, Emilio; Randeberg, Lise Lyngsnes; Alsberg, Bjørn Kåre; Gebremariam, Kidane Fanta; Bracci, Silvano

2017-04-01

Hyperspectral imaging (HSI) is a fast non-invasive imaging technology recently applied in the field of art conservation. With the help of chemometrics, important information about the spectral properties and spatial distribution of pigments can be extracted from HSI data. With the intent of expanding the applications of chemometrics to the interpretation of hyperspectral images of historical documents, and, at the same time, to study the colorants and their spatial distribution on ancient illuminated manuscripts, an explorative chemometric approach is here presented. The method makes use of chemometric tools for spectral de-noising (minimum noise fraction (MNF)) and image analysis (multivariate image analysis (MIA) and iterative key set factor analysis (IKSFA)/spectral angle mapper (SAM)) which have given an efficient separation, classification and mapping of colorants from visible-near-infrared (VNIR) hyperspectral images of an ancient illuminated fragment. The identification of colorants was achieved by extracting and interpreting the VNIR spectra as well as by using a portable X-ray fluorescence (XRF) spectrometer.

Qualitative research methods for medical educators.

Science.gov (United States)

Hanson, Janice L; Balmer, Dorene F; Giardino, Angelo P

2011-01-01

This paper provides a primer for qualitative research in medical education. Our aim is to equip readers with a basic understanding of qualitative research and prepare them to judge the goodness of fit between qualitative research and their own research questions. We provide an overview of the reasons for choosing a qualitative research approach and potential benefits of using these methods for systematic investigation. We discuss developing qualitative research questions, grounding research in a philosophical framework, and applying rigorous methods of data collection, sampling, and analysis. We also address methods to establish the trustworthiness of a qualitative study and introduce the reader to ethical concerns that warrant special attention when planning qualitative research. We conclude with a worksheet that readers may use for designing a qualitative study. Medical educators ask many questions that carefully designed qualitative research would address effectively. Careful attention to the design of qualitative studies will help to ensure credible answers that will illuminate many of the issues, challenges, and quandaries that arise while doing the work of medical education. Copyright © 2011 Academic Pediatric Association. All rights reserved.

Joint illumination and visible-light communication systems : data rates and extra power consumption

NARCIS (Netherlands)

Tsiatmas, Anagnostis; Willems, Frans; Linnartz, Jean-Paul; Baggen, C.P.M.J.; Bergmans, Jan

2015-01-01

Visible Light Communications (VLC) have been promoted as an energy-efficient Gb/s-technology for indoor settings, since VLC can be merged with the illumination functionality. As a result, Joint Illumination and visible-light Communication (JIC) systems are perceived as a green technology and the

Illumination Effect of Laser Light in Foggy Objects Using an Active Imaging System

Energy Technology Data Exchange (ETDEWEB)

Kwon, Seong-Ouk; Park, Seung-Kyu; Ahn, Yong-Jin; Baik, Sung-Hoon; Choi, Young-Soo; Jeong, Kyung-Min [KAERI, Daejeon (Korea, Republic of)

2015-05-15

Active imaging techniques usually provide improved image information when compared to passive imaging techniques. Active vision is a direct visualization technique using an artificial illuminant. Range-gated imaging (RGI) technique is one of active vision technologies. The RGI technique extracts vision information by summing time sliced vision images. In the RGI system, objects are illuminated for ultra-short time by a high intensity illuminant and then the light reflected from objects is captured by a highly sensitive image sensor with the exposure of ultra-short time. The Range-gated imaging is an emerging technology in the field of surveillance for security application, especially in the visualization of darken night or foggy environment. Although RGI viewing was discovered in the 1960's, this technology is currently more applicable by virtue of the rapid development of optical and sensor technologies, such as highly sensitive imaging sensor and ultra-short pulse laser light. Especially, this system can be adopted in robot-vision system by virtue of the compact system configuration. During the past decades, several applications of this technology have been applied in target recognition and in harsh environments, such as fog, underwater vision. Also, this technology has been demonstrated range imaging based on range-gated imaging. Laser light having a short pulse width is usually used for the range-gated imaging system. In this paper, an illumination effect of laser light in foggy objects is studied using a range-gated imaging system. The used imaging system consists of an ultra-short pulse (0.35 ns) laser light and a gated imaging sensor. The experiment is carried out to monitor objects in a box filled by fog. In this paper, the effects by fog particles in range-gated imaging technique are studied. Edge blurring and range distortion are the generated by fog particles.

Illumination Effect of Laser Light in Foggy Objects Using an Active Imaging System

International Nuclear Information System (INIS)

Kwon, Seong-Ouk; Park, Seung-Kyu; Ahn, Yong-Jin; Baik, Sung-Hoon; Choi, Young-Soo; Jeong, Kyung-Min

2015-01-01

Active imaging techniques usually provide improved image information when compared to passive imaging techniques. Active vision is a direct visualization technique using an artificial illuminant. Range-gated imaging (RGI) technique is one of active vision technologies. The RGI technique extracts vision information by summing time sliced vision images. In the RGI system, objects are illuminated for ultra-short time by a high intensity illuminant and then the light reflected from objects is captured by a highly sensitive image sensor with the exposure of ultra-short time. The Range-gated imaging is an emerging technology in the field of surveillance for security application, especially in the visualization of darken night or foggy environment. Although RGI viewing was discovered in the 1960's, this technology is currently more applicable by virtue of the rapid development of optical and sensor technologies, such as highly sensitive imaging sensor and ultra-short pulse laser light. Especially, this system can be adopted in robot-vision system by virtue of the compact system configuration. During the past decades, several applications of this technology have been applied in target recognition and in harsh environments, such as fog, underwater vision. Also, this technology has been demonstrated range imaging based on range-gated imaging. Laser light having a short pulse width is usually used for the range-gated imaging system. In this paper, an illumination effect of laser light in foggy objects is studied using a range-gated imaging system. The used imaging system consists of an ultra-short pulse (0.35 ns) laser light and a gated imaging sensor. The experiment is carried out to monitor objects in a box filled by fog. In this paper, the effects by fog particles in range-gated imaging technique are studied. Edge blurring and range distortion are the generated by fog particles

Technological Health Intervention in Population Aging to Assist People to Work Smarter not Harder: Qualitative Study.

Science.gov (United States)

Chen, Sonia Chien-I

2018-01-04

Technology-based health care has been promoted as an effective tool to enable clinicians to work smarter. However, some health stakeholders believe technology will compel users to work harder by creating extra work. The objective of this study was to investigate how and why electronic health (eHealth) has been applied in Taiwan and to suggest implications that may inspire other countries facing similar challenges. A qualitative methodology was adopted to obtain insightful inputs from deeper probing. Taiwan was selected as a typical case study, given its aging population, advanced technology, and comprehensive health care system. This study investigated 38 stakeholders in the health care ecosystem through in-depth interviews and focus groups, which provides an open, flexible, and enlightening way to study complex, dynamic, and interactive situations through informal conversation or a more structured, directed discussion. First, respondents indicated that the use of technology can enable seamless patient care and clinical benefits such as flexibility in time management. Second, the results suggested that a leader's vision, authority, and management skills might influence success in health care innovation. Finally, the results implied that both internal and external organizational governance are highly relevant for implementing technology-based innovation in health care. This study provided Taiwanese perspectives on how to intelligently use technology to benefit health care and debated the perception that technology prevents human interaction between clinicians and patients. ©Sonia Chien-I Chen. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 04.01.2018.

Technology, Educator Intention, and Relationships in Virtual Learning Spaces: A Qualitative Metasynthesis.

Science.gov (United States)

Gdanetz, Lorraine M; Hamer, Mika K; Thomas, Eileen; Tarasenko, Lindsey M; Horton-Deutsch, Sara; Jones, Jacqueline

2018-04-01

A main concern that remains with the continued growth of online nursing education programs is the way educator and student relationships can be affected by new technologies. This interpretive study aims to gain an understanding of how technology influences the development of interpersonal relationships between the student and faculty in a virtual learning environment. Using an established structured approach to qualitative metasynthesis, a search was conducted using PubMed, EBSCO, CINAHL, Medline, ProQuest, Ovid Nursing databases, and Google Scholar, focused on caring and relational aspects of online nursing education. Technology alters communication, thereby positioning the intentionality of the educator at the heart of interpersonal relationship development in virtual learning spaces. This interpretive synthesis of prior qualitative research supports the development of a framework for online nursing courses, the need for continuing education of nursing faculty, the value of caring intentions, and enhancement of the educator's technological proficiency. [J Nurs Educ. 2018;57(4):197-202.]. Copyright 2018, SLACK Incorporated.

QUALITATIVE INDICATORS OF EFFICIENCY OF TECHNOLOGIES DEVELOPING ESP COMPETENCE IN STUDENTS MAJORING IN SCIENCES

Directory of Open Access Journals (Sweden)

Наталія Микитинко

2015-05-01

Full Text Available The article is dedicated to identifying and diagnosing qualitative indicators of efficiency of technologies developing ESP competence in students majoring in Sciences, namely: indicators of objective and subjective assessment  of students’ ESP competence, students’ motivation regarding professional choice, organizational features of professional training, its contents, the most popular learning activities, use of active methods of study in educational process. The paradigm of experimental research of efficiency of technologies developing ESP competence in students majoring in Sciences has been defined. Based on the interpretation of the qualitative indicators the hypothesis of efficiency of technologies developing ESP competence in students majoring in Sciences has been proven.

Diagnostic Technologies in Practice

Science.gov (United States)

Steinberg, Malcolm; Kwag, Michael; Chown, Sarah A.; Doupe, Glenn; Trussler, Terry; Rekart, Michael; Gilbert, Mark

2015-01-01

Diagnosing HIV-positive gay men through enhanced testing technologies that detect acute HIV infection (AHI) or recent HIV infection provides opportunities for individual and population health benefits. We recruited 25 men in British Columbia who received an acute (n = 13) or recent (n = 12) HIV diagnosis to engage in a longitudinal multiple-methods study over one year or longer. Our thematic analysis of baseline qualitative interviews revealed insights within men’s accounts of technologically mediated processes of HIV discovery and diagnosis. Our analysis illuminated the dialectic of new HIV technologies in practice by considering the relationship between advances in diagnostics (e.g., nucleic acid amplification tests) and the users of these medical technologies in clinical settings (e.g., clients and practitioners). Technological innovations and testing protocols have shifted experiences of learning of one’s HIV-positive status; these innovations have created new diagnostic categories that require successful interpretation and translation to be rendered meaningful, to alleviate uncertainty, and to support public health objectives. PMID:25201583

Illuminating Spaces in the Classroom with Qualitative GIS

Science.gov (United States)

Battista, Geoffrey A.; Manaugh, Kevin

2018-01-01

As social and postmodern ontologies continue to shape our definition of space, undergraduate instructors have struggled to incorporate these paradigms in the geography classroom. Recent research suggests that practical applications using field work, qualitative research, and geographic information science can augment students' understanding of…

Determination of illuminants representing typical white light emitting diodes sources

DEFF Research Database (Denmark)

Jost, S.; Ngo, M.; Ferrero, A.

2017-01-01

is to develop LED-based illuminants that describe typical white LED products based on their Spectral Power Distributions (SPDs). Some of these new illuminants will be recommended in the update of the CIE publication 15 on colorimetry with the other typical illuminants, and among them, some could be used......Solid-state lighting (SSL) products are already in use by consumers and are rapidly gaining the lighting market. Especially, white Light Emitting Diode (LED) sources are replacing banned incandescent lamps and other lighting technologies in most general lighting applications. The aim of this work...... to complement the CIE standard illuminant A for calibration use in photometry....

Fibre illumination system

DEFF Research Database (Denmark)

2012-01-01

Source: EP2426402A The invention relates to a fibre illumination module and system for the collection and delivery of daylight for illumination purposes. The fibre illumination module comprises a plurality of collector elements, each collector element comprising an input fibre having a first end......-directional arrangement. The fibre illumination system comprises a fibre illumination module of the above-mentioned type. By the invention, daylight may be exploited for the illumination of remote interior spaces of buildings in order to save energy, and improve the well-being of users in both housing and working...

Improving the opto-microwave performance of SiGe/Si phototransistor through edge-illuminated structure

Science.gov (United States)

Tegegne, Z. G.; Viana, C.; Polleux, J. L.; Grzeskowiak, M.; Richalot, E.

2016-03-01

This paper demonstrates the experimental study of edge and top illuminated SiGe phototransistors (HPT) implemented using the existing industrial SiGe2RF Telefunken GmbH BiCMOS technology for opto-microwave (OM) applications using 850nm Multi-Mode Fibers (MMF). Its technology and structure are described. Two different optical window size HPTs with top illumination (5x5μm2, 10x10μm2) and an edge illuminated HPTs having 5μm x5μm size are presented and compared. A two-step post fabrication process was used to create an optical access on the edge of the HPT for lateral illumination with a lensed MMF through simple polishing and dicing techniques. We perform Opto-microwave Scanning Near-field Optical Microscopy (OM-SNOM) analysis on edge and top illuminated HPTs in order to observe the fastest and the highest sensitive regions of the HPTs. This analysis also allows understanding the parasitic effect from the substrate, and thus draws a conclusion on the design aspect of SiGe/Si HPT. A low frequency OM responsivity of 0.45A/W and a cutoff frequency, f-3dB, of 890MHz were measured for edge illuminated HPT. Compared to the top illuminated HPT of the same size, the edge illuminated HPT improves the f-3dB by a factor of more than two and also improves the low frequency responsivity by a factor of more than four. These results demonstrate that a simple etched HPT is still enough to achieve performance improvements compared to the top illuminated HPT without requiring a complex coupling structure. Indeed, it also proves the potential of edge coupled SiGe HPT in the ultra-low-cost silicon based optoelectronics circuits with a new approach of the optical packaging and system integration to 850nm MMF.

Ethics of Qualitative Interviewing with Grieving Families.

Science.gov (United States)

Rosenblatt, Paul C.

1995-01-01

Illustrations from a recent study of farm families who had lost a family member are used to illuminate some of the ethical challenges in qualitative bereavement research. Included in the exploration are ethics involved in interview recruitment, causing pain, informed consent, the boundaries of research and therapy, family dysfunction, and…

The transferability of information and communication technology skills from university to the workplace: a qualitative descriptive study.

Science.gov (United States)

Bembridge, Elizabeth; Levett-Jones, Tracy; Jeong, Sarah Yeun-Sim

2011-04-01

This paper presents the findings from a study that explored whether the information and communication technology (ICT) skills nurses acquired at university are relevant and transferable to contemporary practice environments. Whilst universities have attempted to integrate information and communication technology into nursing curricula it is not known whether the skills developed for educational purposes are relevant or transferable to clinical contexts. A qualitative descriptive study was used to explore the perspectives of a small group of new graduate nurses working in a regional/semi-metropolitan healthcare facility in New South Wales, Australia. Semi-structured interviews were used and the data thematically analysed. The themes that emerged from the study are presented in accordance with the conceptual framework and structured under the three headings of pre-transfer, transition and post-transfer. The transferability of information and communication technology skills from university to the workplace is impacted by a range of educational, individual, organisational and contextual factors. Access to adequate ICT and the necessary training opportunities influences new graduates' work satisfaction and their future employment decisions. The ability to effectively use information and communication technology was viewed as essential to the provision of quality patient care. Copyright © 2010 Elsevier Ltd. All rights reserved.

Qualitative "trial-sibling" studies and "unrelated" qualitative studies contributed to complex intervention reviews.

Science.gov (United States)

Noyes, Jane; Hendry, Margaret; Lewin, Simon; Glenton, Claire; Chandler, Jackie; Rashidian, Arash

2016-06-01

To compare the contribution of "trial-sibling" and "unrelated" qualitative studies in complex intervention reviews. Researchers are using qualitative "trial-sibling" studies undertaken alongside trials to provide explanations to understand complex interventions. In the absence of qualitative "trial-sibling" studies, it is not known if qualitative studies "unrelated" to trials are helpful. Trials, "trial-sibling," and "unrelated" qualitative studies looking at three health system interventions were identified. We looked for similarities and differences between the two types of qualitative studies, such as participants, intervention delivery, context, study quality and reporting, and contribution to understanding trial results. Reporting was generally poor in both qualitative study types. We detected no substantial differences in participant characteristics. Interventions in qualitative "trial-sibling" studies were delivered using standardized protocols, whereas interventions in "unrelated" qualitative studies were delivered in routine care. Qualitative "trial-sibling" studies alone provided insufficient data to develop meaningful transferrable explanations beyond the trial context, and their limited focus on immediate implementation did not address all phenomena of interest. Together, "trial-sibling" and "unrelated" qualitative studies provided larger, richer data sets across contexts to better understand the phenomena of interest. Findings support inclusion of "trial-sibling" and "unrelated" qualitative studies to explore complexity in complex intervention reviews. Copyright © 2016 Elsevier Inc. All rights reserved.

Ethnocultural women's experiences of breast cancer: a qualitative meta-study.

Science.gov (United States)

Howard, A Fuchsia; Balneaves, Lynda G; Bottorff, Joan L

2007-01-01

A growing number of studies have been conducted that explore the breast cancer experiences of women from diverse ethnocultural groups. To advance knowledge and provide a foundation for future research, a synthesis was conducted of 15 qualitative research studies focusing on women from ethnocultural groups diagnosed with breast cancer. A qualitative meta-study approach was used that included analysis of the theoretical orientations and methodological approaches underlying the research, and an interpretive synthesis of research findings. Ethnocultural groups represented in the studies included Asian American, Aboriginal, Hispanic, and African American women. The synthesis revealed diverse experiences within and among these ethnocultural groups represented in 5 major themes: (a) the "othered" experience of a breast cancer diagnosis, (b) the treatment experience as "other," (c) losses associated with breast cancer, (d) the family context of breast cancer experiences, and (e) coping with cancer through spirituality and community involvement. The integration of findings from the 15 studies also revealed how methodological and theoretical approaches to conducting this research influenced understandings of the experiences of breast cancer. Further experiential breast cancer research with ethnocultural groups is needed, as well as the use of research methods that illuminate the ways that ethnicity, class, age, and gender relations are played out in healthcare settings.

Perspectives of Family Members on Using Technology in Youth Mental Health Care: A Qualitative Study.

Science.gov (United States)

Lal, Shalini; Daniel, Winnie; Rivard, Lysanne

2017-06-23

Information and communication technologies (ICTs) are increasingly recognized as having an important role in the delivery of mental health services for youth. Recent studies have evaluated young people's access and use of technology, as well as their perspectives on using technology to receive mental health information, services, and support; however, limited attention has been given to the perspectives of family members in this regard. The aim of this study was to explore the perspectives of family members on the use of ICTs to deliver mental health services to youth within the context of specialized early intervention for a first-episode psychosis (FEP). Six focus groups were conducted with family members recruited from an early intervention program for psychosis. Twelve family members participated in the study (target sample was 12-18, and recruitment efforts took place over the duration of 1 year). A 12-item semistructured focus group guide was developed to explore past experiences of technology and recommendations for the use of technology in youth mental health service delivery. A qualitative thematic analysis guided the identification and organization of common themes and patterns identified across the dataset. Findings were organized by the following themes: access and use of technology, potential negative impacts of technology on youth in recovery, potential benefits of using technology to deliver mental health services to youth, and recommendations to use technology for (1) providing quality information in a manner that is accessible to individuals of diverse socioeconomic backgrounds, (2) facilitating communication with health care professionals and services, and (3) increasing access to peer support. To our knowledge, this is among the first (or the first) to explore the perspectives of family members of youth being treated for FEP on the use of technology for mental health care. Our results highlight the importance of considering diverse experiences

A Qualitative Descriptive Analysis of Collaboration Technology in the Navy

Directory of Open Access Journals (Sweden)

Ryan Wark

2015-10-01

Full Text Available Collaboration technologies enable people to communicate and use information to make organizational decisions. The United States Navy refers to this concept as information dominance. Various collaboration technologies are used by the Navy to achieve this mission. This qualitative descriptive study objectively examined how a matrix oriented Navy activity perceived an implemented collaboration technology. These insights were used to determine whether a specific collaboration technology achieved a mission of information dominance. The study used six collaboration themes as a foundation to include: (a Cultural intelligence, (b Communication, (c Capability, (d Coordination, (e Cooperation, and (f Convergence. It was concluded that collaboration technology was mostly perceived well and helped to achieve some levels of information dominance. Collaboration technology improvement areas included bringing greater awareness to the collaboration technology, revamping the look and feel of the user interface, centrally paying for user and storage fees, incorporating more process management tools, strategically considering a Continuity of Operations, and incorporating additional industry best practices for data structures. Emerging themes of collaboration were collected to examine common patterns identified in the collected data. Emerging themes included acceptance, awareness, search, scope, content, value, tools, system performance, implementation, training, support, usage, structure, complexity, approach, governance/configuration management/policy, and resourcing.

Feasibility Study on Passive-radar Detection of Space Targets Using Spaceborne Illuminators of Opportunity

Directory of Open Access Journals (Sweden)

Jiang Tie-zhen

2015-01-01

Full Text Available Space target surveillance generally uses active radars. To take full advantage of passive radars, the idea of using spaceborne illuminators of opportunity for space target detection is presented in this paper. Analysis of the detectable time and direct wave suppression shows that passive radar using spaceborne illuminators of opportunity can effectively detect a Low-Earth-Orbit (LEO target. Meanwhile, Ku and L band bi-static radar cross section of passive radars that use spaceborne illuminators of opportunity are presented by simulation, providing the basis of choosing space target forward scatter. Finally the key parameters, mainly system gain, accumulation time and radiation source selection are studied. Results show that system size using satellite TV signals as illuminators of opportunity is relatively small. These encouraging results should stimulate the development of passive radar detection of space targets using spaceborne illuminators of opportunity.

DMD-based LED-illumination super-resolution and optical sectioning microscopy.

Science.gov (United States)

Dan, Dan; Lei, Ming; Yao, Baoli; Wang, Wen; Winterhalder, Martin; Zumbusch, Andreas; Qi, Yujiao; Xia, Liang; Yan, Shaohui; Yang, Yanlong; Gao, Peng; Ye, Tong; Zhao, Wei

2013-01-01

Super-resolution three-dimensional (3D) optical microscopy has incomparable advantages over other high-resolution microscopic technologies, such as electron microscopy and atomic force microscopy, in the study of biological molecules, pathways and events in live cells and tissues. We present a novel approach of structured illumination microscopy (SIM) by using a digital micromirror device (DMD) for fringe projection and a low-coherence LED light for illumination. The lateral resolution of 90 nm and the optical sectioning depth of 120 μm were achieved. The maximum acquisition speed for 3D imaging in the optical sectioning mode was 1.6×10(7) pixels/second, which was mainly limited by the sensitivity and speed of the CCD camera. In contrast to other SIM techniques, the DMD-based LED-illumination SIM is cost-effective, ease of multi-wavelength switchable and speckle-noise-free. The 2D super-resolution and 3D optical sectioning modalities can be easily switched and applied to either fluorescent or non-fluorescent specimens.

Qualitative Computing and Qualitative Research: Addressing the Challenges of Technology and Globalization

Directory of Open Access Journals (Sweden)

César A. Cisneros Puebla

2012-05-01

Full Text Available Qualitative computing has been part of our lives for thirty years. Today, we urgently call for an evaluation of its international impact on qualitative research. Evaluating the international impact of qualitative research and qualitative computing requires a consideration of the vast amount of qualitative research over the last decades, as well as thoughtfulness about the uneven and unequal way in which qualitative research and qualitative computing are present in different fields of study and geographical regions. To understand the international impact of qualitative computing requires evaluation of the digital divide and the huge differences between center and peripheries. The international impact of qualitative research, and, in particular qualitative computing, is the question at the heart of this array of selected papers from the "Qualitative Computing: Diverse Worlds and Research Practices Conference." In this article, we introduce the reader to the goals, motivation, and atmosphere at the conference, taking place in Istanbul, Turkey, in 2011. The dialogue generated there is still in the air, and this introduction is a call to spread that voice. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1202285

Comparison of two structured illumination techniques based on different 3D illumination patterns

Science.gov (United States)

Shabani, H.; Patwary, N.; Doblas, A.; Saavedra, G.; Preza, C.

2017-02-01

Manipulating the excitation pattern in optical microscopy has led to several super-resolution techniques. Among different patterns, the lateral sinusoidal excitation was used for the first demonstration of structured illumination microscopy (SIM), which provides the fastest SIM acquisition system (based on the number of raw images required) compared to the multi-spot illumination approach. Moreover, 3D patterns that include lateral and axial variations in the illumination have attracted more attention recently as they address resolution enhancement in three dimensions. A threewave (3W) interference technique based on coherent illumination has already been shown to provide super-resolution and optical sectioning in 3D-SIM. In this paper, we investigate a novel tunable technique that creates a 3D pattern from a set of multiple incoherently illuminated parallel slits that act as light sources for a Fresnel biprism. This setup is able to modulate the illumination pattern in the object space both axially and laterally with adjustable modulation frequencies. The 3D forward model for the new system is developed here to consider the effect of the axial modulation due to the 3D patterned illumination. The performance of 3D-SIM based on 3W interference and the tunable system are investigated in simulation and compared based on two different criteria. First, restored images obtained for both 3D-SIM systems using a generalized Wiener filter are compared to determine the effect of the illumination pattern on the reconstruction. Second, the effective frequency response of both systems is studied to determine the axial and lateral resolution enhancement that is obtained in each case.

Improving high resolution retinal image quality using speckle illumination HiLo imaging.

Science.gov (United States)

Zhou, Xiaolin; Bedggood, Phillip; Metha, Andrew

2014-08-01

Retinal image quality from flood illumination adaptive optics (AO) ophthalmoscopes is adversely affected by out-of-focus light scatter due to the lack of confocality. This effect is more pronounced in small eyes, such as that of rodents, because the requisite high optical power confers a large dioptric thickness to the retina. A recently-developed structured illumination microscopy (SIM) technique called HiLo imaging has been shown to reduce the effect of out-of-focus light scatter in flood illumination microscopes and produce pseudo-confocal images with significantly improved image quality. In this work, we adopted the HiLo technique to a flood AO ophthalmoscope and performed AO imaging in both (physical) model and live rat eyes. The improvement in image quality from HiLo imaging is shown both qualitatively and quantitatively by using spatial spectral analysis.

Broadband spectrally dynamic solid state illumination source

Energy Technology Data Exchange (ETDEWEB)

Nicol, David B; Asghar, Ali; Gupta, Shalini; Kang, Hun; Pan, Ming [Georgia Institute of Technology, School of Electrical and Computer Engineering, Atlanta, GA 30332-0250 (United States); Strassburg, Martin [Georgia Institute of Technology, School of Electrical and Computer Engineering, Atlanta, GA 30332-0250 (United States); Georgia State University, Department of Physics and Astronomy, Atlanta, GA 30302-4106 (United States); Summers, Chris; Ferguson, Ian T [Georgia Institute of Technology, School of Materials Science and Engineering, Atlanta, GA 30332 (United States)

2006-06-15

Solid state lighting has done well recently in niche markets such as signage and displays, however, no available SSL technologies incorporate all the necessary attributes for general illumination. Development of a novel solid state general illumination source is discussed here. Two LEDs emitting at two distinct wavelengths can be monolithically grown and used to excite two or more phosphors with varied excitation spectra. The combined phosphorescence spectrum can then be controlled by adjusting the relative intensities of the two LED emissions. Preliminary phosphor analysis shows such a scheme to be viable for use in a spectrally dynamic broadband general illumination source. A tunnel junction is envisioned as a means of current spreading in a buried layer for three terminal operation. However, tunnel junction properties in GaN based materials are not well understood, and require further optimization to be practical devices. Preliminary results on GaN tunnel junctions are presented here as well. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Research study on the effects of illumination on performance of control room tasks

International Nuclear Information System (INIS)

Silverman, E.B.; Horst, R.L.; Parris, H.L.; O'Brien, J.

1990-01-01

The illumination in the control rooms of many operating nuclear plants falls below the levels specified in the NUREG-0700 guidelines. However, these guidelines are based on human perception and performance data which were acquired under laboratory conditions and with tasks very different from those typically found in control rooms. The objective of the present studies was to gather empirical data regarding the levels of illumination sufficient for performing tasks analogous to those performed in control rooms. Several tasks were designed to engage the perceptual and cognitive processes that are representative of actual control room performance. In a computerized laboratory test-bed, subjects scanned edgewise meters, examined hard-copy X-Y plots to discern the value of the displayed function at specific coordinates, and proofread hard-copy plant procedures. In a power plant control room simulator, data were likewise collected in a meter reading task and similar tasks representing elements of specific job-performance measures. For each task, response time and accuracy were measured under a range of illumination levels. Subjective comfort ratings were also obtained for each illumination level. The results from both settings indicated that with decreasing illumination, increased errors and/or longer response times occurred only for levels below ten footcandles, if at all. These data suggest that adequate performance in control room tasks can be achieved at illumination levels below those recommended in NUREG-0700

Preparing Pre-Service Teachers to Integrate Technology in Education: A Synthesis of Qualitative Evidence

Science.gov (United States)

Tondeur, Jo; van Braak, Johan; Sang, Guoyuan; Voogt, Joke; Fisser, Petra; Ottenbreit-Leftwich, Anne

2012-01-01

This study reviewed qualitative studies that focused on strategies to prepare pre-service teachers to integrate technology into their lessons. A meta-ethnography approach was utilized to locate, critically appraise, and synthesize the results of these studies. Based on an extensive search in the Web of Science, 19 articles were included in this…

Preliminary nuclear power reactor technology qualitative assessment for Malaysia

International Nuclear Information System (INIS)

Shamsul Amri Sulaiman

2011-01-01

Since the worlds first nuclear reactor major breakthrough in December 02, 1942, the nuclear power industry has undergone tremendous development and evolution for more than half a century. After surpassing moratorium of nuclear power plant construction caused by catastrophic accidents at Three-mile island (1979) and Chernobyl (1986), today, nuclear energy is back on the policy agendas of many countries, both developed and developing, signaling nuclear revival or nuclear renaissance. Selection of suitable nuclear power technology has thus been subjected to primary attention. This short paper attempts to draw preliminary technology assessment for the first nuclear power reactor technology for Malaysia. Methodology employed is qualitative analysis collating recent finding of tnb-kepco preliminary feasibility study for nuclear power program in peninsular malaysia and other published presentations and/or papers by multiple experts. The results suggested that pressurized water reactor (PWR) is the prevailing technology in terms of numbers and plant performances, and while the commercialization of generation IV reactors is remote (e.g. Not until 2030), generation III/ III+ NPP models are commercially available on the market today. Five (5) major steps involved in reactor technology selection were introduced with a focus on introducing important aspects of selection criteria. Three (3) categories for the of reactor technology selection were used for the cursory evaluation. The outcome of these analyses shall lead to deeper and full analyses of the recommended reactor technologies for a comprehensive feasibility study in the near future. Recommendations for reactor technology option were also provided for both strategic and technical recommendations. The paper shall also implore the best way to select systematically the first civilian nuclear power reactor. (Author)

AC characterization of bulk organic solar cell in the dark and under illumination

International Nuclear Information System (INIS)

Váry, Michal; Perný, Milan; Šály, Vladimír; Packa, Juraj

2014-01-01

Highlights: • A study of organic bulk photovoltaic (PV) solar cell. • Current–voltage characteristics in the dark and under illumination. • AC measurements, both under illumination and in the dark conditions. • Equivalent AC circuit. • Effective lifetime assigned with electron–hole recombination and diffusion time of the electron was estimated. - Abstract: Impedance spectroscopy has been used widely to evaluate the transport processes in photovoltaic, mainly based on inorganic semiconductors, structures – solar cells. The aim of this research was to characterize improved organic bulk photovoltaic (PV) solar cells exploiting this method. Progress in technology of investigated organic solar cell involves the use of an active layer based on low band gap type of polymer. The organic PV cell with front transparent electrode and rear metal electrode and active layer produced by Konarka Technologies was analyzed by electrical DC and AC measurements. Current–voltage (I–V) characteristics in the dark and under illumination were measured and basic PV parameters were calculated. AC measurements, both under illumination and in the dark conditions, were processed in order to identify electronic behavior using equivalent AC circuit which was suggested by fitting of measured impedance data. Circuit with the best correlation to measured data is analyzed in details. Voltage and frequency dependences of fitted equivalent circuit components and calculated parameters are explained and presented in the paper

Natural light illumination system.

Science.gov (United States)

Whang, Allen Jong-Woei; Chen, Yi-Yung; Yang, Shu-Hua; Pan, Po-Hsuan; Chou, Kao-Hsu; Lee, Yu-Chi; Lee, Zong-Yi; Chen, Chi-An; Chen, Cheng-Nan

2010-12-10

In recent years, green energy has undergone a lot of development and has been the subject of many applications. Many research studies have focused on illumination with sunlight as a means of saving energy and creating healthy lighting. Natural light illumination systems have collecting, transmitting, and lighting elements. Today, most daylight collectors use dynamic concentrators; these include Sun tracking systems. However, this design is too expensive to be cost effective. To create a low-cost collector that can be easily installed on a large building, we have designed a static concentrator, which is prismatic and cascadable, to collect sunlight for indoor illumination. The transmission component uses a large number of optical fibers. Because optical fibers are expensive, this means that most of the cost for the system will be related to transmission. In this paper, we also use a prismatic structure to design an optical coupler for coupling n to 1. With the n-to-1 coupler, the number of optical fibers necessary can be greatly reduced. Although this new natural light illumination system can effectively guide collected sunlight and send it to the basement or to other indoor places for healthy lighting, previously there has been no way to manage the collected sunlight when lighting was not desired. To solve this problem, we have designed an optical switch and a beam splitter to control and separate the transmitted light. When replacing traditional sources, the lighting should have similar characteristics, such as intensity distribution and geometric parameters, to those of traditional artificial sources. We have designed, simulated, and optimized an illumination lightpipe with a dot pattern to redistribute the collected sunlight from the natural light illumination system such that it equals the qualities of a traditional lighting system. We also provide an active lighting module that provides lighting from the natural light illumination system or LED auxiliary

Situating methodology within qualitative research.

Science.gov (United States)

Kramer-Kile, Marnie L

2012-01-01

Qualitative nurse researchers are required to make deliberate and sometimes complex methodological decisions about their work. Methodology in qualitative research is a comprehensive approach in which theory (ideas) and method (doing) are brought into close alignment. It can be difficult, at times, to understand the concept of methodology. The purpose of this research column is to: (1) define qualitative methodology; (2) illuminate the relationship between epistemology, ontology and methodology; (3) explicate the connection between theory and method in qualitative research design; and 4) highlight relevant examples of methodological decisions made within cardiovascular nursing research. Although there is no "one set way" to do qualitative research, all qualitative researchers should account for the choices they make throughout the research process and articulate their methodological decision-making along the way.

Redundant information from thermal illumination: quantum Darwinism in scattered photons

Energy Technology Data Exchange (ETDEWEB)

Jess Riedel, C; Zurek, Wojciech H, E-mail: criedel@physics.ucsb.edu [Theory Division, LANL, Los Alamos, NM 87545 (United States)

2011-07-15

We study quantum Darwinism, the redundant recording of information about the preferred states of a decohering system by its environment, for an object illuminated by a blackbody. We calculate the quantum mutual information between the object and its photon environment for blackbodies that cover an arbitrary section of the sky. In particular, we demonstrate that more extended sources have a reduced ability to create redundant information about the system, in agreement with previous evidence that initial mixedness of an environment slows-but does not stop-the production of records. We also show that the qualitative results are robust for more general initial states of the system.

Redundant information from thermal illumination: quantum Darwinism in scattered photons

Science.gov (United States)

Jess Riedel, C.; Zurek, Wojciech H.

2011-07-01

We study quantum Darwinism, the redundant recording of information about the preferred states of a decohering system by its environment, for an object illuminated by a blackbody. We calculate the quantum mutual information between the object and its photon environment for blackbodies that cover an arbitrary section of the sky. In particular, we demonstrate that more extended sources have a reduced ability to create redundant information about the system, in agreement with previous evidence that initial mixedness of an environment slows—but does not stop—the production of records. We also show that the qualitative results are robust for more general initial states of the system.

Qualitative knowledge engineering for nuclear applications

International Nuclear Information System (INIS)

Kim, Jae H.; Kim, Ko R.; Lee, Jae C.

1996-01-01

After the TMI nuclear power plant accident, the two topics of plant safety and operational efficiency became more important areas of artificial intelligence, which have difference characteristics. Qualitative deep model is the recently prospective technology of AI, that can overcome several handicaps of the existing expert systems such as lack of common sense reasoning. The application of AI to the large and complex system like nuclear power plants is typically and effectively done through a module-based hierarchical system. As each module has to be built with suitable AI system. Through the experiences of hierarchical system construction, we aimed to develop basic AI application schemes for the power plant safety and operational efficiency as well as basic technologies for autonomous power plants. The goal of the research is to develop qualitative reasoning technologies for nuclear power plants. For this purpose, the development of qualitative modeling technologies and qualitative behaviour prediction technologies of the power plant are accomplished. In addition, the feasibility of application of typical qualitative reasoning technologies to power plants is studied . The goal of the application is to develop intelligent control technologies of power plants, support technologies. For these purposes, we analyzed the operation of power plants according to its operation purpose: power generation operation, shut-down and start-up operation. As a result, qualitative model of basic components were sketched, including pipes, valves, pumps and heat exchangers. Finally, plant behaviour prediction technologies through qualitative plant heat transfer model and design support technologies through 2nd-order differential equation were developed. For the construction of AI system of power plants, we have studied on the mixed module based hierarchical software. As a testbed, we have considered the spent fuel system and the feedwater system. We also studied the integration

Simplied formula for the illuminance in an optical system

International Nuclear Information System (INIS)

Burkhard, D.G.; Shealy, D.L.

1981-01-01

A formula is derived for the illuminance at any surface in an optical system. By tracing a single ray one can compute the flux density at the image plane or any other position along the ray. The formula involves the ratio of the products of the principal curvatures of the wave front as it approaches each surface to products of the same qualitities after the wave front is refracted at each surface. A procedure is presented for determining the required principal curvatures by generalizing the Coddinton equations to multiple surfaces for both meridional and skew rays. Results are applicable to both sphreical and aspherical surfaces. Since principal radii of curvature specify points on the caustic surfaces, the formula and computation procedure automatically yields the equations for caustic surfaces as a by-product. To illustrate the computation procedure the illuminance and caustic surfaces are derived for an aspherical singlet

Studies of the interaction of CS@ZnS:Mn with bovine serum albumin under illumination

Energy Technology Data Exchange (ETDEWEB)

Liu, Li, E-mail: 2476625723@qq.com [Institute of Agricultural Quality Standards and Testing Technology Research, Hubei Academy of Agricultural Science, Wuhan 430064 (China); Xiao, Ling [School of Resource and Environmental Science, Hubei Biomass-Resource Chemistry and Environmental Biotechnology Key Laboratory, Wuhan University, Wuhan 430072 (China)

2015-09-15

Highlights: • The interaction and illumination damages of CS@ZnS:Mn D-dots to BSA were studied. • The quenching mechanism of CS@ZnS:Mn D-dots with BSA belongs to dynamic quenching. • The hydrophobic interaction plays a major role; the binding processes are spontaneous. • The FL enhancement of CS@ZnS:Mn D-dots by BSA under UV illumination was observed. • The probable mechanism is mainly a photo-induced free radical procedure. - Abstract: In this study, chitosan coated Mn-doped ZnS quantum dots (CS@ZnS:Mn D-dots) were obtained in aqueous media under ambient pressure. The interaction and illumination damages of CS@ZnS:Mn D-dots with bovine serum albumin (BSA) were studied by means of ultraviolet–visible (UV–vis) and fluorescence (FL) spectra. It was found that the FL of BSA was quenched by CS@ZnS:Mn D-dots. The dominating quenching mechanism of CS@ZnS:Mn D-dots with BSA belongs to dynamic quenching. Hydrophobic interaction plays a major role in the CS@ZnS:Mn–BSA interaction; binding processes are spontaneous. Influencing factors such as illumination time and CS@ZnS:Mn D-dots concentrations were considered. The FL quenching effect of BSA by CS@ZnS:Mn D-dots is enhanced with the increase of illumination time and CS@ZnS:Mn D-dots concentration. The FL enhancement of CS@ZnS:Mn D-dots by BSA under UV illumination was also observed. It was proved that, the interaction of CS@ZnS:Mn D-dots with BSA under UV illumination is mainly a result of a photo-induced free radical procedure. CS@ZnS:Mn D-dots may be used as photosensitizers in photodynamic therapy.

Studies of the interaction of CS@ZnS:Mn with bovine serum albumin under illumination

International Nuclear Information System (INIS)

Liu, Li; Xiao, Ling

2015-01-01

Highlights: • The interaction and illumination damages of CS@ZnS:Mn D-dots to BSA were studied. • The quenching mechanism of CS@ZnS:Mn D-dots with BSA belongs to dynamic quenching. • The hydrophobic interaction plays a major role; the binding processes are spontaneous. • The FL enhancement of CS@ZnS:Mn D-dots by BSA under UV illumination was observed. • The probable mechanism is mainly a photo-induced free radical procedure. - Abstract: In this study, chitosan coated Mn-doped ZnS quantum dots (CS@ZnS:Mn D-dots) were obtained in aqueous media under ambient pressure. The interaction and illumination damages of CS@ZnS:Mn D-dots with bovine serum albumin (BSA) were studied by means of ultraviolet–visible (UV–vis) and fluorescence (FL) spectra. It was found that the FL of BSA was quenched by CS@ZnS:Mn D-dots. The dominating quenching mechanism of CS@ZnS:Mn D-dots with BSA belongs to dynamic quenching. Hydrophobic interaction plays a major role in the CS@ZnS:Mn–BSA interaction; binding processes are spontaneous. Influencing factors such as illumination time and CS@ZnS:Mn D-dots concentrations were considered. The FL quenching effect of BSA by CS@ZnS:Mn D-dots is enhanced with the increase of illumination time and CS@ZnS:Mn D-dots concentration. The FL enhancement of CS@ZnS:Mn D-dots by BSA under UV illumination was also observed. It was proved that, the interaction of CS@ZnS:Mn D-dots with BSA under UV illumination is mainly a result of a photo-induced free radical procedure. CS@ZnS:Mn D-dots may be used as photosensitizers in photodynamic therapy

A fundamental study on the influence of the illuminant conditions for the visibility

International Nuclear Information System (INIS)

Fukui, Hirokazu; Ohuchi, Hiroko; Akagi, Sigefumi; Natori, Kazuyuki

2002-01-01

This research was done to explain the way of color combinations for the signs that are excellent in the visibility. The research was composed by three experiments, color naming experiment and the visibility experiment 1 and 2. In the color naming experiment, what kind of color combinations investigated whether a target color could be judged precisely under the various lighting illuminant. The visibility experiment 1 examined the various color combinations that became effective for the visibility under the illuminant. And, the visibility experiment 2 examined the color combinations that were effective for the visibility from the lighting illuminant and the illuminance. Yellow in white background, white in yellow background, purple in red background, purple in green background, as for these 4 color combinations, it became clear that it is the color combination which needed attention under all the lighting illuminants from the color naming experiment and the visibility experiment 1. In the visibility experiment 2, relative visual acuity became more than 0.7 in all the lighting illuminants if there was a ΔL * from the background and the target beyond 30 in the case of the illuminance of 5001x. And, when illuminance was 501x, it became clear that it become less than 0.7 by all the color schemes as for the relative visual acuity in all the lighting illuminants. (author)

A fundamental study on the influence of the illuminant conditions for the visibility

Energy Technology Data Exchange (ETDEWEB)

Fukui, Hirokazu [Institute of Nuclear Safety System, Inc., Mihama, Fukui (Japan); Ohuchi, Hiroko; Akagi, Sigefumi; Natori, Kazuyuki [Japan Color Research Institute, Tokyo (Japan)

2002-09-01

This research was done to explain the way of color combinations for the signs that are excellent in the visibility. The research was composed by three experiments, color naming experiment and the visibility experiment 1 and 2. In the color naming experiment, what kind of color combinations investigated whether a target color could be judged precisely under the various lighting illuminant. The visibility experiment 1 examined the various color combinations that became effective for the visibility under the illuminant. And, the visibility experiment 2 examined the color combinations that were effective for the visibility from the lighting illuminant and the illuminance. Yellow in white background, white in yellow background, purple in red background, purple in green background, as for these 4 color combinations, it became clear that it is the color combination which needed attention under all the lighting illuminants from the color naming experiment and the visibility experiment 1. In the visibility experiment 2, relative visual acuity became more than 0.7 in all the lighting illuminants if there was a {delta}L{sup *} from the background and the target beyond 30 in the case of the illuminance of 5001x. And, when illuminance was 501x, it became clear that it become less than 0.7 by all the color schemes as for the relative visual acuity in all the lighting illuminants. (author)

Lighting system with illuminance control

DEFF Research Database (Denmark)

2013-01-01

The present invention relates to an illumination control system comprising a plurality of outdoor luminaries and a motorized service vehicle. Each luminaire comprises a controllable light source producing a light illuminance. The motorized service vehicle comprises a light sensor configured...... to detect the light illuminance generated by the controllable light source at the motorized service vehicle. The motorized service vehicle computes light illuminance data based on the detected light illuminance and transmits these to the outdoor luminaire through a wireless communication link or stores...... the light illuminance data on a data recording device of the motorized service vehicle. The outdoor luminaire receives may use the light illuminance data to set or adjust a light illuminance of the controllable light source....

A qualitative study of extended care permit dental hygienists in Kansas.

Science.gov (United States)

Delinger, Janette; Gadbury-Amyot, Cynthia C; Mitchell, Tanya Villalpando; Williams, Karen B

2014-06-01

Currently, 37 states allow some type of alternative practice settings for dental hygienists. This qualitative study was designed to explore the experiences of the Extended Care Permit (ECP) dental hygienist in the state of Kansas. As a first ever study of this workforce model, a qualitative research design was chosen to illuminate the education and experiences of extended dental hygiene practitioners in order to understand the impact ECP legislation has had on increasing the public's access to oral health care services and define the advantages and limitation of this model as one potential solution to access to oral care. Snowball sampling was used to identify study participants who were actively engaged in extended care practice. Nine subjects, which included one ECP consultant and eight ECP providers, participated in this study. Data obtained via personal interviews and through document analysis data were subsequently coded and thematically analyzed by three examiners. An independent audit was conducted by a fourth examiner to confirm dependability of results. Seven major categories emerged from the data analysis: entrepreneur dental hygienist, partnerships, funding, barriers, sustainability, models of care and the impact of the ECP. The findings of this study revealed that ECP hygienists are making an impact with underserved populations, primarily children, the elderly and special needs patients. Copyright © 2014 The American Dental Hygienists’ Association.

Electrochemical impedance spectroscopy of dodecylsulphate doped polypyrrole films in the dark and under illumination

Directory of Open Access Journals (Sweden)

Martini Milena

2000-01-01

Full Text Available The morphology, thickness, oxidation and illumination effects in dodecylsulphate doped polypyrrole films can be qualitatively observed by EIS and consist in variations of interfacial and bulk resistances and capacitances of a proposed equivalent circuit. The circuit well with the measured spectra of films obtained with 190 mC cm-2 of synthesis charge density. For thinner films the calculated values observed by electrochemical impedance spectroscopy (EIS deviate probably due to the absence of diffusion effects. The oxidation of the films diminishes the total impedance over the entire frequency range. The morphology effects are also observed in the entire spectra. The illumination effects are reversible and are observed as expected only in the reduced form of the polymer. The illumination reduces the internal resistance and the space-charge capacitance and increases the charge transfer resistance and the double layer capacitance.

Difficulties in using everyday technology after acquired brain injury: a qualitative analysis.

Science.gov (United States)

Engström, Ann-Louice Lövgreen; Lexell, Jan; Lund, Maria Larsson

2010-09-01

The aim of this study was to identify and describe the characteristics of the difficulties using everyday technology in persons with an aquired brain injury (ABI), and their experiences of how these difficulties influenced their life. Thirteen persons with an ABI were interviewed about their difficulties in using everyday technology and were observed in their use of technology. Data were analysed qualitatively with a constant comparative method. The results showed that the persons' experiences formed two categories: “A variety of combinations of difficulties in the use of everyday technology” and “Restrictions in life”. The difficulties identified were related not only to everyday technology itself but also to the interaction between the technology, the task, the person, and the environment. These difficulties influenced their experiences of restrictions in occupational performance, personal identification, and participation in society. The results emphasize that occupational therapists who design interventions for people with an ABI need to accommodate both the technology and other interacting aspects in order to overcome difficulties in using everyday technology.

Real-time particle tracking at 10,000 fps using optical fiber illumination.

Science.gov (United States)

Otto, Oliver; Czerwinski, Fabian; Gornall, Joanne L; Stober, Gunter; Oddershede, Lene B; Seidel, Ralf; Keyser, Ulrich F

2010-10-25

We introduce optical fiber illumination for real-time tracking of optically trapped micrometer-sized particles with microsecond time resolution. Our light source is a high-radiance mercury arc lamp and a 600 μm optical fiber for short-distance illumination of the sample cell. Particle tracking is carried out with a software implemented cross-correlation algorithm following image acquisition from a CMOS camera. Our image data reveals that fiber illumination results in a signal-to-noise ratio usually one order of magnitude higher compared to standard Köhler illumination. We demonstrate position determination of a single optically trapped colloid with up to 10,000 frames per second over hours. We calibrate our optical tweezers and compare the results with quadrant photo diode measurements. Finally, we determine the positional accuracy of our setup to 2 nm by calculating the Allan variance. Our results show that neither illumination nor software algorithms limit the speed of real-time particle tracking with CMOS technology.

Homeless drug users and information technology: a qualitative study with potential implications for recovery from drug dependence.

Science.gov (United States)

Neale, Joanne; Stevenson, Caral

2014-09-01

Having access to information and communication technologies (ICTs) is a prerequisite to meaningful participation in society. This paper seeks to: i. explore the engagement of homeless drug users (HDUs) with ICTs and ii. discuss the findings with reference to recovery from drug dependence. The study design was qualitative and longitudinal, involving data collected in 2012-13 via 52 semi-structured interviews with 30 homeless drug users (25 men; five women). Participants were recruited from 17 hostels in two English cities. Interview data were analyzed using Framework. HDUs had access to ICTs, used ICTs, and wanted to engage with them more. Experiences of digital exclusion were a function of participants' inability to afford ICTs, the relatively cheap and poor quality technology available to them, limited knowledge about ICTs, and lack of support in using them. That HDUs were often unable to take full advantage of technology because they had nobody to explain what their devices could do or to show them how they worked was ironic given that using ICTs to (re)establish and maintain relationships were functions of technology that HDUs particularly liked. The physical, human, cultural, and social capital of HDUs influenced their access to, and use of, ICTs. Equally, ICTs were themselves an important recovery resource. Services and others should endeavor to provide HDUs with easy access to good quality technology, as well as offers of support and education so that all individuals have the knowledge and confidence to make optimum use of the technology that is available to them.

Energy Savings Forecast of Solid-State Lighting in General Illumination Applications

Energy Technology Data Exchange (ETDEWEB)

none,

2014-08-29

With declining production costs and increasing technical capabilities, LED adoption has recently gained momentum in general illumination applications. This is a positive development for our energy infrastructure, as LEDs use significantly less electricity per lumen produced than many traditional lighting technologies. The U.S. Department of Energy’s Energy Savings Forecast of Solid-State Lighting in General Illumination Applications examines the expected market penetration and resulting energy savings of light-emitting diode, or LED, lamps and luminaires from today through 2030.

Split-illumination electron holography

Energy Technology Data Exchange (ETDEWEB)

Tanigaki, Toshiaki; Aizawa, Shinji; Suzuki, Takahiro; Park, Hyun Soon [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Inada, Yoshikatsu [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan); Matsuda, Tsuyoshi [Japan Science and Technology Agency, Kawaguchi, Saitama 332-0012 (Japan); Taniyama, Akira [Corporate Research and Development Laboratories, Sumitomo Metal Industries, Ltd., Amagasaki, Hyogo 660-0891 (Japan); Shindo, Daisuke [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan); Tonomura, Akira [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Okinawa Institute of Science and Technology, Graduate University, Onna-son, Okinawa 904-0495 (Japan); Central Research Laboratory, Hitachi, Ltd., Hatoyama, Saitama 350-0395 (Japan)

2012-07-23

We developed a split-illumination electron holography that uses an electron biprism in the illuminating system and two biprisms (applicable to one biprism) in the imaging system, enabling holographic interference micrographs of regions far from the sample edge to be obtained. Using a condenser biprism, we split an electron wave into two coherent electron waves: one wave is to illuminate an observation area far from the sample edge in the sample plane and the other wave to pass through a vacuum space outside the sample. The split-illumination holography has the potential to greatly expand the breadth of applications of electron holography.

Split-illumination electron holography

International Nuclear Information System (INIS)

Tanigaki, Toshiaki; Aizawa, Shinji; Suzuki, Takahiro; Park, Hyun Soon; Inada, Yoshikatsu; Matsuda, Tsuyoshi; Taniyama, Akira; Shindo, Daisuke; Tonomura, Akira

2012-01-01

We developed a split-illumination electron holography that uses an electron biprism in the illuminating system and two biprisms (applicable to one biprism) in the imaging system, enabling holographic interference micrographs of regions far from the sample edge to be obtained. Using a condenser biprism, we split an electron wave into two coherent electron waves: one wave is to illuminate an observation area far from the sample edge in the sample plane and the other wave to pass through a vacuum space outside the sample. The split-illumination holography has the potential to greatly expand the breadth of applications of electron holography.

Illuminating the Effects of Dynamic Lighting on Student Learning

Directory of Open Access Journals (Sweden)

Michael S. Mott

2012-05-01

Full Text Available Light is universally understood as essential to the human condition. Yet light quality varies substantially in nature and in controlled environments leading to questions of which artificial light characteristics facilitate maximum learning. Recent research has examined lighting variables of color temperature, and illumination for affecting sleep, mood, focus, motivation, concentration, and work and school performance. This has resulted in artificial light systems intended to support human beings in their actualization through dynamic lighting technology allowing for different lighting conditions per task. A total of 84 third graders were exposed to either focus (6000K-100fc average maintained or normal lighting. Focus lighting led to a higher percentage increase in oral reading fluency performance (36% than did control lighting (17%. No lighting effects were found for motivation or concentration, possibly attributable to the younger age level of respondents as compared with European studies. These findings illuminate the need for further research on artificial light and learning.

Chromatic illumination discrimination ability reveals that human colour constancy is optimised for blue daylight illuminations.

Directory of Open Access Journals (Sweden)

Bradley Pearce

Full Text Available The phenomenon of colour constancy in human visual perception keeps surface colours constant, despite changes in their reflected light due to changing illumination. Although colour constancy has evolved under a constrained subset of illuminations, it is unknown whether its underlying mechanisms, thought to involve multiple components from retina to cortex, are optimised for particular environmental variations. Here we demonstrate a new method for investigating colour constancy using illumination matching in real scenes which, unlike previous methods using surface matching and simulated scenes, allows testing of multiple, real illuminations. We use real scenes consisting of solid familiar or unfamiliar objects against uniform or variegated backgrounds and compare discrimination performance for typical illuminations from the daylight chromaticity locus (approximately blue-yellow and atypical spectra from an orthogonal locus (approximately red-green, at correlated colour temperature 6700 K, all produced in real time by a 10-channel LED illuminator. We find that discrimination of illumination changes is poorer along the daylight locus than the atypical locus, and is poorest particularly for bluer illumination changes, demonstrating conversely that surface colour constancy is best for blue daylight illuminations. Illumination discrimination is also enhanced, and therefore colour constancy diminished, for uniform backgrounds, irrespective of the object type. These results are not explained by statistical properties of the scene signal changes at the retinal level. We conclude that high-level mechanisms of colour constancy are biased for the blue daylight illuminations and variegated backgrounds to which the human visual system has typically been exposed.

Realtime global illumination using compressed pre-computed indirect illumination textures

DEFF Research Database (Denmark)

Bahnsen, Chris; Martin dit Neuville, Antoine; Pedersen, Casper

2012-01-01

and added to the direct illumination to produce the total illumination. Depending on the type of image produced, the algorithm allows a camera to move, and even objects to be added or modified at runtime to some extent. Finally, we will see that the amount of data to store and process can also be reduced...

Study in static mode of a photovoltaic cell bi facial to crystalline silicon under electric polarization and constant multispectral illumination

International Nuclear Information System (INIS)

ZOUNGRANA Martial

2000-01-01

The theoretical study in static mode of a photovoltaic cell bi facial to silicon under electric polarization and multispectral illumination is presented. Through this study, various expressions of the parameters of recombination have been established as well for an illumination by the face before an illumination by the back face. Curves of variation of the densities of carriers, densities of photocurrent, speeds of recombinations and photo tensions have been traced for the two modes of illumination [fr

Identifying Qualitative Factors Affecting the Production and Distribution of Information and Knowledge in Science and Technology Parks of Iran

Directory of Open Access Journals (Sweden)

Ali Haji Shamsaei

2017-06-01

Full Text Available This study was conducted in order to identity Qualitative factors affecting the production and distribution of information and knowledge in science and technology parks of Iran. The research was Applied Research in which, qualitative method was carried out. The population of the study was included of 10 managers of Knowledge-based Companies. The data was collected from the population using semi-structured and in-depth interviews. For data analysis, content analysis was used. Results of the qualitative factors affecting the production and distribution of information and knowledge in science and technology parks of Iran, led to extraction of 39 components which were classified in four categories: I Foreign and domestic policy, II Financial and economic support, III Infrastructure barriers and IV Cultural barriers. Results howed that overcoming the political, financial and economic, infrastructural and cultural barriers has undeniable impact on production and distribution of information and knowledge.

How can students contribute? A qualitative study of active student involvement in development of technological learning material for clinical skills training.

Science.gov (United States)

Haraldseid, Cecilie; Friberg, Febe; Aase, Karina

2016-01-01

Policy initiatives and an increasing amount of the literature within higher education both call for students to become more involved in creating their own learning. However, there is a lack of studies in undergraduate nursing education that actively involve students in developing such learning material with descriptions of the students' roles in these interactive processes. Explorative qualitative study, using data from focus group interviews, field notes and student notes. The data has been subjected to qualitative content analysis. Active student involvement through an iterative process identified five different learning needs that are especially important to the students: clarification of learning expectations, help to recognize the bigger picture, stimulation of interaction, creation of structure, and receiving context- specific content. The iterative process involvement of students during the development of new technological learning material will enhance the identification of important learning needs for students. The use of student and teacher knowledge through an adapted co-design process is the most optimal level of that involvement.

Predicting Ground Illuminance

Science.gov (United States)

Lesniak, Michael V.; Tregoning, Brett D.; Hitchens, Alexandra E.

2015-01-01

Our Sun outputs 3.85 x 1026 W of radiation, of which roughly 37% is in the visible band. It is directly responsible for nearly all natural illuminance experienced on Earth's surface, either in the form of direct/refracted sunlight or in reflected light bouncing off the surfaces and/or atmospheres of our Moon and the visible planets. Ground illuminance, defined as the amount of visible light intercepting a unit area of surface (from all incident angles), varies over 7 orders of magnitude from day to night. It is highly dependent on well-modeled factors such as the relative positions of the Sun, Earth, and Moon. It is also dependent on less predictable factors such as local atmospheric conditions and weather.Several models have been proposed to predict ground illuminance, including Brown (1952) and Shapiro (1982, 1987). The Brown model is a set of empirical data collected from observation points around the world that has been reduced to a smooth fit of illuminance against a single variable, solar altitude. It provides limited applicability to the Moon and for cloudy conditions via multiplicative reduction factors. The Shapiro model is a theoretical model that treats the atmosphere as a three layer system of light reflectance and transmittance. It has different sets of reflectance and transmittance coefficients for various cloud types.In this paper we compare the models' predictions to ground illuminance data from an observing run at the White Sands missile range (data was obtained from the United Kingdom's Meteorology Office). Continuous illuminance readings were recorded under various cloud conditions, during both daytime and nighttime hours. We find that under clear skies, the Shapiro model tends to better fit the observations during daytime hours with typical discrepancies under 10%. Under cloudy skies, both models tend to poorly predict ground illuminance. However, the Shapiro model, with typical average daytime discrepancies of 25% or less in many cases

Enhancing Institutional Assessment Efforts through Qualitative Methods

Science.gov (United States)

Van Note Chism, Nancy; Banta, Trudy W.

2007-01-01

Qualitative methods can do much to describe context and illuminate the why behind patterns encountered in institutional assessment. Alone, or in combination with quantitative methods, they should be the approach of choice for many of the most important assessment questions. (Contains 1 table.)

Optimization of low-level light therapy's illumination parameters for spinal cord injury in a rat model

Science.gov (United States)

Shuaib, Ali; Bourisly, Ali

2018-02-01

Spinal cord injury (SCI) can result in complete or partial loss of sensation and motor function due to interruption along the severed axonal tract(s). SCI can result in tetraplegia or paraplegia, which can have prohibitive lifetime medical costs and result in shorter life expectancy. A promising therapeutic technique that is currently in experimental phase and that has the potential to be used to treat SCI is Low-level light therapy (LLLT). Preclinical studies have shown that LLLT has reparative and regenerative capabilities on transected spinal cords, and that LLLT can enhance axonal sprouting in animal models. However, despite the promising effects of LLLT as a therapy for SCI, it remains difficult to compare published results due to the use of a wide range of illumination parameters (i.e. different wavelengths, fluences, beam types, and beam diameter), and due to the lack of a standardized experimental protocol(s). Before any clinical applications of LLLT for SCI treatment, it is crucial to standardize illumination parameters and efficacy of light delivery. Therefore, in this study we aim to evaluate the light fluence distribution on a 3D voxelated SCI rat model with different illumination parameters (wavelengths: 660, 810, and 980 nm; beam types: Gaussian and Flat; and beam diameters: 0.1, 0.2, and 0.3 cm) for LLLT using Monte Carlo simulation. This study provides an efficient approach to guide researchers in optimizing the illumination parameters for LLLT spinal cord injury in an experimental model and will aid in quantitative and qualitative standardization of LLLT-SCI treatment.

Toward Understanding the Role of Web 2.0 Technology in Self-Directed Learning and Job Performance in a Single Organizational Setting: A Qualitative Case Study

Science.gov (United States)

Caruso, Shirley J.

2016-01-01

This single instrumental qualitative case study explores and thickly describes job performance outcomes based upon the manner in which self-directed learning activities of a purposefully selected sample of 3 construction managers are conducted, mediated by the use of Web 2.0 technology. The data collected revealed that construction managers are…

Effects of illuminants and illumination time on lettuce growth, yield and nutritional quality in a controlled environment

Science.gov (United States)

Shen, Y. Z.; Guo, S. S.; Ai, W. D.; Tang, Y. K.

2014-07-01

Effects of illuminants and illumination time on the growth of lettuce were researched. Red-blue light-emitting diodes (LEDs, 90% red light +10% blue light) and white light fluorescent (WF) lamps were compared as the illuminants for plant cultivation. Under each type of illuminant, lettuce was grown at 4 illumination times: 12 h, 16 h, 20 h and 24 h, with the same light intensity of 600 μmolm-2s-1. The leaf net photosynthetic rate (Pn) under the two illuminants was comparable but the shape of lettuce was obviously affected by the illuminant. The WF lamps produced more compact plant, while red-blue LED resulted in less but longer leaves. However, the total leaf area was not significantly affected by the illuminant. The red-blue LED produced nearly same aboveground biomass with far less energy consumption relative to WF lamps. The underground biomass was lowered under red-blue LED in comparison with WF lamps. Red-blue LED could improve the nutritional quality of lettuce by increasing the concentration of soluble sugar and vitamin C (VC) and reducing the concentration of nitrate. Under each type of illuminant, longer illumination time resulted in higher Pn, more leaves and larger leaf area. The total chlorophyll concentration increased while the concentration ratio of chlorophyll a/b decreased with the extension of illumination time. Illumination time had highly significant positive correlation with biomass. Moreover, when total daily light input was kept the same, longer illumination time increased the biomass significantly as well. In addition, longer illumination time increased the concentration of crude fiber, soluble sugar and VC and reduced the concentration of nitrate. In summary, red-blue LEDs and 24 h illumination time were demonstrated to be more suitable for lettuce cultivation in the controlled environment.

Qualitative Case Study Guidelines

Science.gov (United States)

2013-11-01

Introduction to Sociological Methods. 2nd ed. New York, McGraw-Hill 14. Denzin , N. K. and Lincoln , Y. S. (2011) The SAGE Handbook of Qualitative...The Art of Science. In: Denzin , N. K. and Lincoln , Y. S. (eds.) Handbook of Qualitative Research. Thousand Oaks, Sage 19. GAO (1990) Case Study...Rinehart & Winston 39. Stake, R. E. (1994) Case Studies. In: Denzin , N. K. and Lincoln , Y. S. (eds.) Handbook of Qualitative Research. Thousand Oaks, Sage

The emotional sequelae of whistleblowing: findings from a qualitative study.

Science.gov (United States)

Peters, Kath; Luck, Lauretta; Hutchinson, Marie; Wilkes, Lesley; Andrew, Sharon; Jackson, Debra

2011-10-01

To highlight and illuminate the emotional sequelae of whistleblowing from whistleblowers and subjects of whistleblowing complaints. Whistleblowing has the potential to have a negative impact on individuals' physical and emotional well-being. However, few empirical studies have been conducted using qualitative methods to provide an in-depth exploration of the emotional consequences for those involved in whistleblowing incidents. Qualitative narrative inquiry design. Purposive sampling was used to recruit participants who had been involved in whistleblowing incidents. During interviews participants' accounts were digitally recorded and then transcribed verbatim. Data were then analysed by two researchers until consensus was reached. Findings revealed that participants' emotional health was considerably compromised as a result of the whistleblowing incident. Analysis of the data revealed the following dominant themes: 'I felt sad and depressed': overwhelming and persistent distress; 'I was having panic attacks and hyperventilating': acute anxiety; and, 'I had all this playing on my mind': nightmares, flashbacks and intrusive thoughts. While it has been previously acknowledged that whistleblowing has the potential to have a negative impact on all aspects of an individual's life, this study notably highlights the intensity of emotional symptoms suffered by participants as well as the extended duration of time these symptoms were apparent. As professionals, nurses, as well as organisations, have a responsibility to identify those who may be suffering the emotional trauma of whistleblowing and ensure they have access to appropriate resources. © 2011 Blackwell Publishing Ltd.

A Qualitative and Quantitative Assay to Study DNA/Drug Interaction ...

African Journals Online (AJOL)

Research Article. A Qualitative and Quantitative Assay to Study. DNA/Drug Interaction Based on Sequence Selective. Inhibition of Restriction Endonucleases. Syed A Hassan1*, Lata Chauhan2, Ritu Barthwal2 and Aparna Dixit3. 1 Faculty of Computing and Information Technology, King Abdul Aziz University, Rabigh-21911 ...

Daylight illumination-color-contrast tables for full-form objects naturally illuminated objects

CERN Document Server

Nagel, M

1978-01-01

Daylight Illumination-Color-Contrast Tables for Full-form Objects is the result of a major computational project concerning the illumination, color, and contrast conditions in naturally illuminated objects. The project from which this two-chapter book is derived is originally conceived in support of the various remote sensing and image processing activities of the Deutsche Forschungs- und Versuchsanstalt für Luft- und Raumfahrt, Oberpfaffenhofen, West Germany DFVLR, in particular, those depending on the quantitative photometric and colorimetric evaluation of photographs and other environmental

Study of chromatic adaptation using memory color matches, Part II: colored illuminants.

Science.gov (United States)

Smet, Kevin A G; Zhai, Qiyan; Luo, Ming R; Hanselaer, Peter

2017-04-03

In a previous paper, 12 corresponding color data sets were derived for 4 neutral illuminants using the long-term memory colours of five familiar objects. The data were used to test several linear (one-step and two-step von Kries, RLAB) and nonlinear (Hunt and Nayatani) chromatic adaptation transforms (CAT). This paper extends that study to a total of 156 corresponding color sets by including 9 more colored illuminants: 2 with low and 2 with high correlated color temperatures as well as 5 representing high chroma adaptive conditions. As in the previous study, a two-step von Kries transform whereby the degree of adaptation D is optimized to minimize the DEu'v' prediction errors outperformed all other tested models for both memory color and literature corresponding color sets, whereby prediction errors were lower for the memory color set. Most of the transforms tested, except the two- and one-step von Kries models with optimized D, showed large errors for corresponding color subsets that contained non-neutral adaptive conditions as all of them tended to overestimate the effective degree of adaptation in this study. An analysis of the impact of the sensor space primaries in which the adaptation is performed was found to have little impact compared to that of model choice. Finally, the effective degree of adaptation for the 13 illumination conditions (4 neutral + 9 colored) was successfully modelled using a bivariate Gaussian in a Macleod-Boyton like chromaticity diagram.

Analytic turnaround time study for integrated reporting of pathology results on electronic medical records using the Illuminate system

Directory of Open Access Journals (Sweden)

Tawfik O

2016-09-01

Full Text Available Timely pathology results are critical for appropriate diagnosis and management of patients. Yet workflows in laboratories remain ad hoc and involve accessing multiple systems with no direct linkage between patient history and prior or pending pathology records for the case being analyzed. A major hindrance in timely reporting of pathology results is the need to incorporate/interface with multiple electronic health records (EHRs. We evaluated the Illuminate PatientView software (Illuminate integration into pathologist's workflow. Illuminate is a search engine architecture that has a repository of textual information from many hospital systems. Our goal was to develop a comprehensive, user friendly patient summary display to integrate the current fractionated subspecialty specific systems. An analytical time study noting changes in turnaround time (TAT before and after Illuminate implementation was recorded for reviewers, including pathologists, residents and fellows. Reviewers' TAT for 359 cases was recorded (200 cases before and 159 after implementation. The impact of implementing Illuminate on transcriptionists’ workflow was also studied. Average TAT to retrieve EHRs prior to Illuminate was 5:32 min (range 1:35-10:50. That time was significantly reduced to 35 seconds (range 10 sec-1:10 min using Illuminate. Reviewers were very pleased with the ease in accessing information and in eliminating the draft paper documents of the pathology reports, eliminating up to 65 min/day (25-65 min by transcriptionists matching requisition with paperwork. Utilizing Illuminate improved workflow, decreased TAT and minimized cost. Patient care can be improved through a comprehensive patient management system that facilitates communications between isolated information systems.

Fully depleted back-illuminated p-channel CCD development

Energy Technology Data Exchange (ETDEWEB)

Bebek, Chris J.; Bercovitz, John H.; Groom, Donald E.; Holland, Stephen E.; Kadel, Richard W.; Karcher, Armin; Kolbe, William F.; Oluseyi, Hakeem M.; Palaio, Nicholas P.; Prasad, Val; Turko, Bojan T.; Wang, Guobin

2003-07-08

An overview of CCD development efforts at Lawrence Berkeley National Laboratory is presented. Operation of fully-depleted, back-illuminated CCD's fabricated on high resistivity silicon is described, along with results on the use of such CCD's at ground-based observatories. Radiation damage and point-spread function measurements are described, as well as discussion of CCD fabrication technologies.

Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps

Energy Technology Data Exchange (ETDEWEB)

Johnstone, Peter; Jacobson, Arne; Mills, Evan; Radecsky, Kristen

2009-03-21

Creation of light for work, socializing, and general illumination is a fundamental application of technology around the world. For those who lack access to electricity, an emerging and diverse range of LED based lighting products hold promise for replacing and/or augmenting their current fuel-based lighting sources that are costly and dirty. Along with analysis of environmental factors, economic models for total cost-ofownership of LED lighting products are an important tool for studying the impacts of these products as they emerge in markets of developing countries. One important metric in those models is the minimum illuminance demanded by end-users for a given task before recharging the lamp or replacing batteries. It impacts the lighting service cost per unit time if charging is done with purchased electricity, batteries, or charging services. The concept is illustrated in figure 1: LED lighting products are generally brightest immediately after the battery is charged or replaced and the illuminance degrades as the battery is discharged. When a minimum threshold level of illuminance is reached, the operational time for the battery charge cycle is over. The cost to recharge depends on the method utilized; these include charging at a shop at a fixed price per charge, charging on personal grid connections, using solar chargers, and purchasing dry cell batteries. This Research Note reports on the observed"charge-triggering" illuminance level threshold for night market vendors who use LED lighting products to provide general and task oriented illumination. All the study participants charged with AC power, either at a fixed-price charge shop or with electricity at their home.

Living with low carbon technologies: An agenda for sharing and comparing qualitative energy research

International Nuclear Information System (INIS)

Bickerstaff, Karen; Devine-Wright, Patrick; Butler, Catherine

2015-01-01

Policies to reduce the carbon intensity of domestic living place considerable emphasis on the diffusion of low(er) carbon technologies-from microgeneration to an array of feedback and monitoring devices. These efforts presume that low carbon technologies (LCTs) will be accepted and integrated into domestic routines in the ways intended by their designers. This study contributes to an emerging qualitative energy research (QER) literature by deploying an analytical approach that explores comparison of data from two UK projects (‘Carbon, Comfort and Control’ and 'Conditioning Demand’) concerned, in broad terms, with householder-LCTs interactions — primarily associated with the production and maintenance of thermal comfort. In-depth, and in many cases repeat, interviews were conducted in a total of 18 households where devices such as heat pumps and thermal feedback lamps had recently been installed. We discuss this comparative process and how a reflexive reading of notions of (and strategies associated with) credibility, transferability, dependability and confirmablity enabled new ways of working and thinking with existing data. We conclude by highlighting the contrasts, conflicts, but also creativities raised by drawing these connections, and consider implications for methodologies associated with qualitative energy research. -- Highlights: •We develop a robust strategy for comparing data from Qualitative Energy Research (QER). •We apply principles of qualitative rigour to a reanalysis of two QER datasets. •We demonstrate how this approach can strengthen extant analyses as well as reveal new interpretive insights. •We highlight the academic and policy significance of developing comparative approaches to QER

Videolaryngoscopes differ substantially in illumination of the oral cavity: A manikin study

Directory of Open Access Journals (Sweden)

Barbe MA Pieters

2016-01-01

Full Text Available Background and Aims: Insufficient illumination of the oral cavity during endotracheal intubation may result in suboptimal conditions. Consequently, suboptimal illumination and laryngoscopy may lead to potential unwanted trauma to soft tissues of the pharyngeal mucosa. We investigated illumination of the oral cavity by different videolaryngoscopes (VLS in a manikin model. Methods: We measured light intensity from the mouth opening of a Laerdal intubation trainer comparing different direct and indirect VLS at three occasions, resembling optimal to less-than-optimal intubation conditions; at the photographer′s dark room, in an operating theatre and outdoors in bright sunlight. Results: Substantial differences in luminance were detected between VLS. The use of LED light significantly improved light production. All VLS produced substantial higher luminance values in a well-luminated environment compared to the dark photographer′s room. The experiments outside-in bright sunlight-were interfered with by direct sunlight penetration through the synthetic material of the manikin, making correct measurement of luminance in the oropharynx invalid. Conclusion: Illumination of the oral cavity differs widely among direct and indirect VLS. The clinician should be aware of the possibility of suboptimal illumination of the oral cavity and the potential risk this poses for the patient.

Capsular Outcomes After Pediatric Cataract Surgery Without Intraocular Lens Implantation: Qualitative Classification and Quantitative Measurement.

Science.gov (United States)

Tan, Xuhua; Lin, Haotian; Lin, Zhuoling; Chen, Jingjing; Tang, Xiangchen; Luo, Lixia; Chen, Weirong; Liu, Yizhi

2016-03-01

The objective of this study was to investigate capsular outcomes 12 months after pediatric cataract surgery without intraocular lens implantation via qualitative classification and quantitative measurement.This study is a cross-sectional study that was approved by the institutional review board of Zhongshan Ophthalmic Center of Sun Yat-sen University in Guangzhou, China.Digital coaxial retro-illumination photographs of 329 aphakic pediatric eyes were obtained 12 months after pediatric cataract surgery without intraocular lens implantation. Capsule digital coaxial retro-illumination photographs were divided as follows: anterior capsule opening area (ACOA), posterior capsule opening area (PCOA), and posterior capsule opening opacity (PCOO). Capsular outcomes were qualitatively classified into 3 types based on the PCOO: Type I-capsule with mild opacification but no invasion into the capsule opening; Type II-capsule with moderate opacification accompanied by contraction of the ACOA and invasion to the occluding part of the PCOA; and Type III-capsule with severe opacification accompanied by total occlusion of the PCOA. Software was developed to quantitatively measure the ACOA, PCOA, and PCOO using standardized DCRPs. The relationships between the accurate intraoperative anterior and posterior capsulorhexis sizes and the qualitative capsular types were statistically analyzed.The DCRPs of 315 aphakic eyes (95.8%) of 191 children were included. Capsular outcomes were classified into 3 types: Type I-120 eyes (38.1%); Type II-157 eyes (49.8%); Type III-38 eyes (12.1%). The scores of the capsular outcomes were negatively correlated with intraoperative anterior capsulorhexis size (R = -0.572, P PCOA increased in size from Type I to Type II, and the PCOO increased from Type II to Type III (all P < 0.05).Capsular outcomes after pediatric cataract surgery can be qualitatively classified and quantitatively measured by acquisition, division, definition, and user

Development of flying spot illumination system for stage lighting

Science.gov (United States)

Asakawa, Hisashi; Ishii, Katsunori; Koshiro, Hikari; Baba, Junko; Wakaki, Moriaki

2014-02-01

The system to control the area of illumination is important for the luminaires used for stages and TV studios. Presently the methods to change the distance between a lamp and lenses, or to use a zooming projection of the aperture illuminated by the lamp are used to control the area. However, these methods require many optical components or mechanical components. Moreover, the energy of the light source is partially consumed by the absorption of the shutter on adjusting the illumination area. On the other hand, the control of the illuminance over the illuminated area is not possible by the methods. In this study, we developed the lighting system which enables to control both the illuminated area and the illuminance distribution within the area by scanning the beam from a LED array light source. The area of illumination was expanded along one dimension by scanning the LED beam using a rotating polygon mirror. The selection of the illuminated width and the control of the illuminance distribution were achieved by synchronizing the pulse width modulation (PWM) control of the LED with the rotation of the mirror using a time sharing control. As a result, various illuminance distributions can be realized at real time by using software control for the luminaire. The developed system has the merits of compact and high efficiency.

Computer supported qualitative research

CERN Document Server

Reis, Luís; Sousa, Francislê; Moreira, António; Lamas, David

2017-01-01

This book contains an edited selection of the papers accepted for presentation and discussion at the first International Symposium on Qualitative Research (ISQR2016), held in Porto, Portugal, July 12th-14th, 2016. The book and the symposium features the four main application fields Education, Health, Social Sciences and Engineering and Technology and seven main subjects: Rationale and Paradigms of Qualitative Research (theoretical studies, critical reflection about epistemological dimensions, ontological and axiological); Systematization of approaches with Qualitative Studies (literature review, integrating results, aggregation studies, meta -analysis, meta- analysis of qualitative meta- synthesis, meta- ethnography); Qualitative and Mixed Methods Research (emphasis in research processes that build on mixed methodologies but with priority to qualitative approaches); Data Analysis Types (content analysis , discourse analysis , thematic analysis , narrative analysis , etc.); Innovative processes of Qualitative ...

Illumination normalization of face image based on illuminant direction estimation and improved Retinex.

Directory of Open Access Journals (Sweden)

Jizheng Yi

Full Text Available Illumination normalization of face image for face recognition and facial expression recognition is one of the most frequent and difficult problems in image processing. In order to obtain a face image with normal illumination, our method firstly divides the input face image into sixteen local regions and calculates the edge level percentage in each of them. Secondly, three local regions, which meet the requirements of lower complexity and larger average gray value, are selected to calculate the final illuminant direction according to the error function between the measured intensity and the calculated intensity, and the constraint function for an infinite light source model. After knowing the final illuminant direction of the input face image, the Retinex algorithm is improved from two aspects: (1 we optimize the surround function; (2 we intercept the values in both ends of histogram of face image, determine the range of gray levels, and stretch the range of gray levels into the dynamic range of display device. Finally, we achieve illumination normalization and get the final face image. Unlike previous illumination normalization approaches, the method proposed in this paper does not require any training step or any knowledge of 3D face and reflective surface model. The experimental results using extended Yale face database B and CMU-PIE show that our method achieves better normalization effect comparing with the existing techniques.

Illumination normalization of face image based on illuminant direction estimation and improved Retinex.

Science.gov (United States)

Yi, Jizheng; Mao, Xia; Chen, Lijiang; Xue, Yuli; Rovetta, Alberto; Caleanu, Catalin-Daniel

2015-01-01

Illumination normalization of face image for face recognition and facial expression recognition is one of the most frequent and difficult problems in image processing. In order to obtain a face image with normal illumination, our method firstly divides the input face image into sixteen local regions and calculates the edge level percentage in each of them. Secondly, three local regions, which meet the requirements of lower complexity and larger average gray value, are selected to calculate the final illuminant direction according to the error function between the measured intensity and the calculated intensity, and the constraint function for an infinite light source model. After knowing the final illuminant direction of the input face image, the Retinex algorithm is improved from two aspects: (1) we optimize the surround function; (2) we intercept the values in both ends of histogram of face image, determine the range of gray levels, and stretch the range of gray levels into the dynamic range of display device. Finally, we achieve illumination normalization and get the final face image. Unlike previous illumination normalization approaches, the method proposed in this paper does not require any training step or any knowledge of 3D face and reflective surface model. The experimental results using extended Yale face database B and CMU-PIE show that our method achieves better normalization effect comparing with the existing techniques.

Topology optimization for optical microlithography with partially coherent illumination

DEFF Research Database (Denmark)

Zhou, Mingdong; Lazarov, Boyan Stefanov; Sigmund, Ole

2017-01-01

in microlithography/nanolithography. The key steps include (i) modeling the physical inputs of the fabrication process, including the ultraviolet light illumination source and the mask, as the design variables in optimization and (ii) applying physical filtering and heaviside projection for topology optimization......This article revisits a topology optimization design approach for micro-manufacturing and extends it to optical microlithography with partially coherent illumination. The solution is based on a combination of two technologies, the topology optimization and the proximity error correction....... Meanwhile, the performance of the device is optimized and robust with respect to process variations, such as dose/photo-resist variations and lens defocus. A compliant micro-gripper design example is considered to demonstrate the applicability of this approach....

Diffraction analysis of customized illumination technique

Science.gov (United States)

Lim, Chang-Moon; Kim, Seo-Min; Eom, Tae-Seung; Moon, Seung Chan; Shin, Ki S.

2004-05-01

Various enhancement techniques such as alternating PSM, chrome-less phase lithography, double exposure, etc. have been considered as driving forces to lead the production k1 factor towards below 0.35. Among them, a layer specific optimization of illumination mode, so-called customized illumination technique receives deep attentions from lithographers recently. A new approach for illumination customization based on diffraction spectrum analysis is suggested in this paper. Illumination pupil is divided into various diffraction domains by comparing the similarity of the confined diffraction spectrum. Singular imaging property of individual diffraction domain makes it easier to build and understand the customized illumination shape. By comparing the goodness of image in each domain, it was possible to achieve the customized shape of illumination. With the help from this technique, it was found that the layout change would not gives the change in the shape of customized illumination mode.

A Qualitative Study of the Treatment Improvement Protocols (TIPs): An Assessment of the Use of TIPs by Individuals Affiliated with the Addiction Technology Transfer Centers (ATTCs).

Science.gov (United States)

Hayashi, Susan W.; Suzuki, Marcia; Hubbard, Susan M.; Huang, Judy Y.; Cobb, Anita M.

2003-01-01

Evaluated the Addiction Technology Transfer Centers (ATTCs) of the Center for Substance Abuse Treatment (CSAT) as a means of diffusion of innovations, focusing on use of the Treatment Improvement Protocols (TIPs). Qualitative studies at 6 ATTCs that included 57 interviews show that the CSAT is at the forefront of providing resources to the…

An overview of LED applications for general illumination

Science.gov (United States)

Pelka, David G.; Patel, Kavita

2003-11-01

This paper begins by reviewing the current state of development of LEDs, their existing markets as well as their potential for energy conservation and their potential for gaining market share in the general illumination market. It discusses LED metrics such as chip size, lumens per watt, thermal resistance, and the recommended maximum current rating. The paper then goes on to consider the importance of non-imaging optics for both optically efficient and extremely compact LED lighting systems. Finally, microstructures useful for controlling the fields-of-view of LED lighting systems are considered and described in some detail. An extremely efficient and cost effective microstructure, called kinoform diffusers, is shown to have very unique properties that make this technology almost ideal for shaping the output beams of LED lighting systems. It concludes by illustrating some general illumination LED lighting systems

Extending Beyond Qualitative Interviewing to Illuminate the Tacit Nature of Everyday Occupation: Occupational Mapping and Participatory Occupation Methods.

Science.gov (United States)

Huot, Suzanne; Rudman, Debbie Laliberte

2015-07-01

The study of human occupation requires a variety of methods to fully elucidate its complex, multifaceted nature. Although qualitative approaches have commonly been used within occupational therapy and occupational science, we contend that such qualitative research must extend beyond the sole use of interviews. Drawing on qualitative methodological literature, we discuss the limits of interview methods and outline other methods, particularly visual methods, as productive means to enhance qualitative research. We then provide an overview of our critical ethnographic study that used narrative, visual, and observational methods to explore the occupational transitions experienced by immigrants to Canada. We describe our use of occupational mapping and participatory occupation methods and the contributions of these combined methods. We conclude that adopting a variety of methods can enable a deeper understanding of the tacit nature of everyday occupation, and is key to advancing knowledge regarding occupation and to informing occupational therapy practice.

Quantum Illumination with Noiseless Linear Amplifier

International Nuclear Information System (INIS)

Zhang Sheng-Li; Wang -Kun; Guo Jian-Sheng; Shi Jian-Hong

2015-01-01

Quantum illumination, that is, quantum target detection, is to detect the potential target with two-mode quantum entangled state. For a given transmitted energy, the quantum illumination can achieve a target-detection probability of error much lower than the illumination scheme without entanglement. We investigate the usefulness of noiseless linear amplification (NLA) for quantum illumination. Our result shows that NLA can help to substantially reduce the number of quantum entangled states collected for joint measurement of multi-copy quantum state. Our analysis on the NLA-assisted scheme could help to develop more efficient schemes for quantum illumination. (paper)

Barriers and possibilities for the emerging alternative lighting technologies

DEFF Research Database (Denmark)

Bjarklev, Araceli; Kjær, Tyge; Andersen, Jan

2009-01-01

the incandescent lamp; However, the emergence of other illumination technologies such as Light Emitting Diodes (LEDs) are currently raising in question, whether the fluorescent lamp is the technology that best can reduce the (large) illumination cological footprint. Europe and more specifically Denmark, a country......20% of the total electricity produced in the world today is used for illumination. Though the use of energy in Europe almost stagnated during the 1990ies, studies reveal that for the next 30 years the consumption of electricity will again increase making the 20% reduction of CO2 goal almost...... are the main possibilities and limitations for the Danish lighting Industry to help reducing the global illumination ecological footprint and what can be improved in the current illumination value chain in order to use the possibilities?...

Perceived connections between information and communication technology use and mental symptoms among young adults - a qualitative study.

Science.gov (United States)

Thomée, Sara; Dellve, Lotta; Härenstam, Annika; Hagberg, Mats

2010-02-12

Prospective associations have been found between high use of information and communication technology (ICT) and reported mental symptoms among young adult university students, but the causal mechanisms are unclear. Our aim was to explore possible explanations for associations between high ICT use and symptoms of depression, sleep disorders, and stress among young adults in order to propose a model of possible pathways to mental health effects that can be tested epidemiologically. We conducted a qualitative interview study with 16 women and 16 men (21-28 years), recruited from a cohort of university students on the basis of reporting high computer (n = 28) or mobile phone (n = 20) use at baseline and reporting mental symptoms at the one-year follow-up. Semi-structured interviews were performed, with open-ended questions about possible connections between the use of computers and mobile phones, and stress, depression, and sleep disturbances. The interview data were analyzed with qualitative content analysis and summarized in a model. Central factors appearing to explain high quantitative ICT use were personal dependency, and demands for achievement and availability originating from the domains of work, study, social life, and individual aspirations. Consequences included mental overload, neglect of other activities and personal needs, time pressure, role conflicts, guilt feelings, social isolation, physical symptoms, worry about electromagnetic radiation, and economic problems. Qualitative aspects (destructive communication and information) were also reported, with consequences including vulnerability, misunderstandings, altered values, and feelings of inadequacy. User problems were a source of frustration. Altered ICT use as an effect of mental symptoms was reported, as well as possible positive effects of ICT on mental health. The concepts and ideas of the young adults with high ICT use and mental symptoms generated a model of possible paths for associations

Perceived connections between information and communication technology use and mental symptoms among young adults - a qualitative study

Directory of Open Access Journals (Sweden)

Hagberg Mats

2010-02-01

Full Text Available Abstract Background Prospective associations have been found between high use of information and communication technology (ICT and reported mental symptoms among young adult university students, but the causal mechanisms are unclear. Our aim was to explore possible explanations for associations between high ICT use and symptoms of depression, sleep disorders, and stress among young adults in order to propose a model of possible pathways to mental health effects that can be tested epidemiologically. Methods We conducted a qualitative interview study with 16 women and 16 men (21-28 years, recruited from a cohort of university students on the basis of reporting high computer (n = 28 or mobile phone (n = 20 use at baseline and reporting mental symptoms at the one-year follow-up. Semi-structured interviews were performed, with open-ended questions about possible connections between the use of computers and mobile phones, and stress, depression, and sleep disturbances. The interview data were analyzed with qualitative content analysis and summarized in a model. Results Central factors appearing to explain high quantitative ICT use were personal dependency, and demands for achievement and availability originating from the domains of work, study, social life, and individual aspirations. Consequences included mental overload, neglect of other activities and personal needs, time pressure, role conflicts, guilt feelings, social isolation, physical symptoms, worry about electromagnetic radiation, and economic problems. Qualitative aspects (destructive communication and information were also reported, with consequences including vulnerability, misunderstandings, altered values, and feelings of inadequacy. User problems were a source of frustration. Altered ICT use as an effect of mental symptoms was reported, as well as possible positive effects of ICT on mental health. Conclusions The concepts and ideas of the young adults with high ICT use and mental

Sexual behavior of infertile women: a qualitative study.

Science.gov (United States)

Bokaie, Mahshid; Simbar, Masoumeh; Yassini Ardekani, Seyed Mojtaba

2015-10-01

Infertility makes an essential challenge to the sexual life of couples, especially infertile women. When pregnancy does not happen, infertile women think that sexual intercourse is not fruitful and sexual desire became reduce gradually. Infertile women progressively forget that their sexual relationship is also a response to their natural need. This qualitative study was conducted to explore the infertility consequences in the sexual behavior of infertile women. This was a qualitative content analysis study; and it was part of a widespread study, used a sequential mixed-method and conducted from August 2014 until February 2015. A purposeful sampling was used to recruit infertile women who had referred to Yazd Research and Clinical Center for Infertility. Data gathering techniques employed in this research included in-depth semi structured open face-to-face interviews and field notes. Credibility, transferability, confirm ability, and dependability were assessed for the rigor of the data collection. Totally, 15 infertile women and 8 key informants were interviewed. Data analysis showed four themes about impact of infertility on female sexual behavior: 1/ Impact of infertility drugs on couple sexual behavior, 2/ Impact of assisted reproductive technologies on female sexual behavior, 3/ Timed intercourse during infertility and 4/ The psychological impact of infertility on sexual behavior. Some of Iranian infertile women could cope with their problems, but some of them were very affected by infertility drugs and assisted reproductive technologies procedures. Psychosexual counseling before medical treatment could help them to have a better sexual life.

Qualitative research in travel behavior studies

Energy Technology Data Exchange (ETDEWEB)

Mars Aicart, M.L.; Ruiz Sanchez, T.; Arroyo Lopez, M.R.

2016-07-01

Qualitative methodology is extensively used in a wide range of scientific areas, such as Sociology and Psychology, and it is been used to study individual and household decision making processes. However, in the Transportation Planning and Engineering domain it is still infrequent to find in the travel behavior literature studies using qualitative techniques to explore activity-travel decisions. The aim of this paper is first, to provide an overview of the types of qualitative techniques available and to explore how to correctly implement them. Secondly, to highlight the special characteristics of qualitative methods that make them appropriate to study activity-travel decision processes. Far from been an unempirical or intuitive methodology, using qualitative methods properly implies a strong foundation on theoretical frameworks, a careful design of data collection and a deep data analysis. For such a purpose, a review of the scarce activity-travel behavior literature using qualitative methods, or a combination of qualitative and quantitative approaches, is presented. The use of qualitative techniques can play a role of being a supplementary way of obtaining information related to activity-travel decisions which otherwise it would be extremely difficult to find. This work ends with some conclusions about how qualitative research could help in making progress on activity-travel behavior studies. (Author)

Biological Effects Of Artificial Illumination

Science.gov (United States)

Corth, Richard

1980-10-01

We are increasingly being warned of the possible effects of so called "polluted" light, that is light that differs in spectral content from that of sunlight. We should be concerned, we are told, because all animals and plants have evolved under this natural daylight and therefore any difference between that illuminant and the artificial illuminants that are on the market today, is suspect. The usual presentation of the differences between the sunlight and the artificial illuminants are as shown in Figure 1. Here we are shown the spectral power distribution of sunlight and Cool White fluorescent light. The spectral power distributions of each have been normalized to some convenient wavelength so that each can be seen and easily compared on the same figure. But this presentation is misleading for one does not experience artificial illuminants at the same intensity as one experiences sunlight. Sunlight intensities are ordinarily found to be in the 8000 to 10,000 footcandle range whereas artificial illuminants are rarely experienced at intensity levels greater than 100 footcandles. Therefore a representative difference between the two types of illumination conditions is more accurately represented as in Figure 2. Thus if evolutionary adaptations require that humans and other animals be exposed to sunlight to ensure wellbeing, it is clear that one must be exposed to sunlight intensities. It is not feasible to expect that artificially illuminated environments will be lit to the same intensity as sunlight

Telemedicine’s potential to support good dying in Nigeria: a qualitative study

NARCIS (Netherlands)

van Gurp, J.; Soyannwo, O.; Odebunmi, K.; Dania, S.; van Selm, M.; van Leeuwen, E.; Vissers, K.; Hasselaar, J.

2015-01-01

Objectives This qualitative study explores Nigerian health care professionals’ concepts of good dying/a good death and how telemedicine technologies and services would fit the current Nigerian palliative care practice. Materials and Methods Supported by the Centre for Palliative Care Nigeria (CPCN)

Educational texts as empirical basis in qualitative research in Physical Education

DEFF Research Database (Denmark)

Svendsen, Annemari Munk

This presentation will focus attention on educational texts as empirical basis in qualitative research in Physical Education (PE). Educational texts may be defined as all kinds of texts used in a pedagogical setting, including textbooks, popular articles, webpages and political reports (Selander......). This makes them fundamental sites for illuminating what counts as knowledge in an educational setting (Selander & Skjeldbred, 2004). This presentation will introduce a qualitative research study obtained with discourse analysis of educational texts in Physical Education Teacher Education (PETE) in Denmark...... (Svendsen & Svendsen, 2014). It will present the theoretical and methodological considerations that are tied to the analysis of educational texts and discuss the qualities and challenges related to educational texts as empirical basis in qualitative research in PE. References: Apple, M. W. & Christian...

Does the New Digital Generation of Learners Exist? A Qualitative Study

Science.gov (United States)

Sanchez, Jaime; Salinas, Alvaro; Contreras, David; Meyer, Eduardo

2011-01-01

This paper seeks to contribute to the discussion on the current generation of students and their relationship to technology, providing qualitative, empirical information obtained in the Chilean context. The study analyses and discusses the ideas regarding the emergence of a new generation of learners, or digital natives, as characterised by…

Illumination Sufficiency Survey Techniques: In-situ Measurements of Lighting System Performance and a User Preference Survey for Illuminance in an Off-Grid, African Setting

Energy Technology Data Exchange (ETDEWEB)

Alstone, Peter; Jacobson, Arne; Mills, Evan

2010-08-26

Efforts to promote rechargeable electric lighting as a replacement for fuel-based light sources in developing countries are typically predicated on the notion that lighting service levels can be maintained or improved while reducing the costs and environmental impacts of existing practices. However, the extremely low incomes of those who depend on fuel-based lighting create a need to balance the hypothetically possible or desirable levels of light with those that are sufficient and affordable. In a pilot study of four night vendors in Kenya, we document a field technique we developed to simultaneously measure the effectiveness of lighting service provided by a lighting system and conduct a survey of lighting service demand by end-users. We took gridded illuminance measurements across each vendor's working and selling area, with users indicating the sufficiency of light at each point. User light sources included a mix of kerosene-fueled hurricane lanterns, pressure lamps, and LED lanterns.We observed illuminance levels ranging from just above zero to 150 lux. The LED systems markedly improved the lighting service levels over those provided by kerosene-fueled hurricane lanterns. Users reported that the minimum acceptable threshold was about 2 lux. The results also indicated that the LED lamps in use by the subjects did not always provide sufficient illumination over the desired retail areas. Our sample size is much too small, however, to reach any conclusions about requirements in the broader population. Given the small number of subjects and very specific type of user, our results should be regarded as indicative rather than conclusive. We recommend replicating the method at larger scales and across a variety of user types and contexts. Policymakers should revisit the subject of recommended illuminance levels regularly as LED technology advances and the price/service balance point evolves.

Education Technology Services at Indiana University: A Case Study.

Science.gov (United States)

Bichelmeyer, B. A.; Hara, Noriko; Yi, Jessi; Dennen, Vanessa; Avers, Dale; Tzeng, Jeng-Yi

1998-01-01

This paper, based on a qualitative research study, describes the technology resources available in the Indiana University School of Education, explains the range of services provided by Education Technology Services (ETS), documents the organizational structure of ETS, and describes the key processes and culture of ETS. (Author/AEF)

HTA and synthesis of qualitative research

DEFF Research Database (Denmark)

Draborg, Eva Ulriksen; Hansen, Helle Ploug

2007-01-01

Introduction: Health technology assessment is no longer simply a question of efficacy and economics. Internationally there is growing interest in patient-related and organisational aspects and questions of why and how the technologies work. Qualitative research has established a role in answering...... these kinds of questions. Key challenges using qualitative research in HTA are related to the interpretive and small scale nature of qualitative research and how to synthesise qualitative research. Objective: The objective of this study is to examine and discuss the relevance of synthesis of qualitative...... research (SQR) in HTAs and to address its possibilities and limitations. Methods: SQR is described and discussed focusing on definition of synthesis and of qualitative versus quantitative methods, on questions of evidence and on the relevance for HTA. SQR is understood as an umbrella term for different...

Communication technologies in the study environment

DEFF Research Database (Denmark)

Thorhauge, Anne Mette

2012-01-01

will argue that the ways in which these technologies are used reflects two different perspectives on the interplay between communication technology and organisational structure: organisational structure as an anticipation of communication patterns implied in course management system’s design......In this article, I will analyse and discuss two qualitative case studies concerning ICT in the study environment at the University of Copenhagen, Denmark. I will place special focus on the way in which organisational perspectives as well as technological affordances shape how communication...... technologies are integrated into organisational structures and practices on campus. This involves a comparison between course management systems on the one hand and students’ personal media (mobile phones, e-mails) on the other hand, with regard to how these are used on campus. On the basis of this analysis, I...

Sample size in qualitative interview studies

DEFF Research Database (Denmark)

Malterud, Kirsti; Siersma, Volkert Dirk; Guassora, Ann Dorrit Kristiane

2016-01-01

Sample sizes must be ascertained in qualitative studies like in quantitative studies but not by the same means. The prevailing concept for sample size in qualitative studies is “saturation.” Saturation is closely tied to a specific methodology, and the term is inconsistently applied. We propose...... the concept “information power” to guide adequate sample size for qualitative studies. Information power indicates that the more information the sample holds, relevant for the actual study, the lower amount of participants is needed. We suggest that the size of a sample with sufficient information power...... and during data collection of a qualitative study is discussed....

"Maybe we should talk about it anyway": a qualitative study of understanding expectations and use of an established technology innovation in caring practices.

Science.gov (United States)

Stokke, Randi

2017-09-15

Technological innovations are strongly promoted to meet the demands posed by increased pressure on home care services and to assist ageing in place in western societies. Although heavily advocated as plug and play solutions, technologies have proven difficult and unpredictable when integrated into home care services. We need greater insight into what happens when technologies are integrated into caring practices. All technologies come with expectations as to their function. This study explores how actors who are involved with the social alarm, which is an established technology innovation, relate to, perceive and articulate these expectations of the technology in everyday living. The article presents results from a two-case study, using a triangulation of qualitative methods in order to gain an in-depth understanding of technology in use in home care services through "thick descriptions". The study was conducted in Norway and data were analysed using a stepwise deductive-inductive analysis. The empirical findings demonstrate that expectations regarding the social alarm, even though it represents a simple and well-established technology, are complex and multidimensional. The notion of script and domestication provided relevant tools for exploring these expectations and for understanding how actors interpret and adapt their practices of using the technology. This enabled a more comprehensive understanding of how technology opens up for different interpretations and puts values in play. This article suggests exploring technology in use as scripted in multidimensional script, and offers a frame for doing so. It also reveals how technology scripts and articulation prove important for understanding the complex reality when integrated into home care practices, thus identifying how using the technology leads to the taming and unleashing of both technology and actors. The study offers an increased understanding of how and why technology is unpredictable and works

A Qualitative Study of Information Technology Managers' Experiences and Perceptions Regarding Outsourced Data Centers

Science.gov (United States)

Reid, Eric Justin

2015-01-01

This qualitative study explored the perceptions and experiences of IT Managers in publicly traded companies within the San Antonio, Texas area about outsourced data centers. Narrative data was collected using open-ended questions and face-to-face interviews within semi-structured environments. The research questions guided the study: (1)…

Illumination estimation via thin-plate spline interpolation.

Science.gov (United States)

Shi, Lilong; Xiong, Weihua; Funt, Brian

2011-05-01

Thin-plate spline interpolation is used to interpolate the chromaticity of the color of the incident scene illumination across a training set of images. Given the image of a scene under unknown illumination, the chromaticity of the scene illumination can be found from the interpolated function. The resulting illumination-estimation method can be used to provide color constancy under changing illumination conditions and automatic white balancing for digital cameras. A thin-plate spline interpolates over a nonuniformly sampled input space, which in this case is a training set of image thumbnails and associated illumination chromaticities. To reduce the size of the training set, incremental k medians are applied. Tests on real images demonstrate that the thin-plate spline method can estimate the color of the incident illumination quite accurately, and the proposed training set pruning significantly decreases the computation.

Study of polarization phenomena in Schottky CdTe diodes using infrared light illumination

Energy Technology Data Exchange (ETDEWEB)

Sato, Goro, E-mail: gsato@astro.isas.jaxa.jp [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); Fukuyama, Taro [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); University of Tokyo, 7-3-1, Hongo, Bunkyo, Tokyo 113-0033 (Japan); Watanabe, Shin; Ikeda, Hirokazu; Ohta, Masayuki; Ishikawa, Shin' nosuke [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); Takahashi, Tadayuki [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); University of Tokyo, 7-3-1, Hongo, Bunkyo, Tokyo 113-0033 (Japan); Shiraki, Hiroyuki; Ohno, Ryoichi [ACRORAD Co., Ltd., 13-23 Suzaki, Uruma, Okinawa 904-2234 (Japan)

2011-10-01

Schottky CdTe diode detectors suffer from a polarization phenomenon, which is characterized by degradation of the spectral properties over time following exposure to high bias voltage. This is considered attributable to charge accumulation at deep acceptor levels. A Schottky CdTe diode was illuminated with an infrared light for a certain period during a bias operation, and two opposite behaviors emerged. The detector showed a recovery when illuminated after the bias-induced polarization had completely progressed. Conversely, when the detector was illuminated before the emergence of bias-induced polarization, the degradation of the spectral properties was accelerated. Interpretation of these effects and discussion on the energy level of deep acceptors are presented.

Sexual behavior of infertile women: a qualitative study

Directory of Open Access Journals (Sweden)

Mahshid Bokaie

2015-10-01

Full Text Available Background: Infertility makes an essential challenge to the sexual life of couples, especially infertile women. When pregnancy does not happen, infertile women think that sexual intercourse is not fruitful and sexual desire became reduce gradually. Infertile women progressively forget that their sexual relationship is also a response to their natural need. Objective: This qualitative study was conducted to explore the infertility consequences in the sexual behavior of infertile women. Materials and Methods: This was a qualitative content analysis study; and it was part of a widespread study, used a sequential mixed-method and conducted from August 2014 until February 2015. A purposeful sampling was used to recruit infertile women who had referred to Yazd Research and Clinical Center for Infertility. Data gathering techniques employed in this research included in-depth semi structured open face-to-face interviews and field notes. Credibility, transferability, confirm ability, and dependability were assessed for the rigor of the data collection. Results: Totally, 15 infertile women and 8 key informants were interviewed. Data analysis showed four themes about impact of infertility on female sexual behavior: 1/ Impact of infertility drugs on couple sexual behavior, 2/ Impact of assisted reproductive technologies on female sexual behavior, 3/ Timed intercourse during infertility and 4/ The psychological impact of infertility on sexual behavior. Conclusion: Some of Iranian infertile women could cope with their problems, but some of them were very affected by infertility drugs and assisted reproductive technologies procedures. Psychosexual counseling before medical treatment could help them to have a better sexual life.

Image illumination enhancement with an objective no-reference measure of illumination assessment based on Gaussian distribution mapping

Directory of Open Access Journals (Sweden)

Gholamreza Anbarjafari

2015-12-01

Full Text Available Illumination problems have been an important concern in many image processing applications. The pattern of the histogram on an image introduces meaningful features; hence within the process of illumination enhancement, it is important not to destroy such information. In this paper we propose a method to enhance image illumination using Gaussian distribution mapping which also keeps the information laid on the pattern of the histogram on the original image. First a Gaussian distribution based on the mean and standard deviation of the input image will be calculated. Simultaneously a Gaussian distribution with the desired mean and standard deviation will be calculated. Then a cumulative distribution function of each of the Gaussian distributions will be calculated and used in order to map the old pixel value onto the new pixel value. Another important issue in the field of illumination enhancement is absence of a quantitative measure for the assessment of the illumination of an image. In this research work, a quantitative measure indicating the illumination state, i.e. contrast level and brightness of an image, is also proposed. The measure utilizes the estimated Gaussian distribution of the input image and the Kullback-Leibler Divergence (KLD between the estimated Gaussian and the desired Gaussian distributions to calculate the quantitative measure. The experimental results show the effectiveness and the reliability of the proposed illumination enhancement technique, as well as the proposed illumination assessment measure over conventional and state-of-the-art techniques.

Illumination compensation in ground based hyperspectral imaging

Science.gov (United States)

Wendel, Alexander; Underwood, James

2017-07-01

Hyperspectral imaging has emerged as an important tool for analysing vegetation data in agricultural applications. Recently, low altitude and ground based hyperspectral imaging solutions have come to the fore, providing very high resolution data for mapping and studying large areas of crops in detail. However, these platforms introduce a unique set of challenges that need to be overcome to ensure consistent, accurate and timely acquisition of data. One particular problem is dealing with changes in environmental illumination while operating with natural light under cloud cover, which can have considerable effects on spectral shape. In the past this has been commonly achieved by imaging known reference targets at the time of data acquisition, direct measurement of irradiance, or atmospheric modelling. While capturing a reference panel continuously or very frequently allows accurate compensation for illumination changes, this is often not practical with ground based platforms, and impossible in aerial applications. This paper examines the use of an autonomous unmanned ground vehicle (UGV) to gather high resolution hyperspectral imaging data of crops under natural illumination. A process of illumination compensation is performed to extract the inherent reflectance properties of the crops, despite variable illumination. This work adapts a previously developed subspace model approach to reflectance and illumination recovery. Though tested on a ground vehicle in this paper, it is applicable to low altitude unmanned aerial hyperspectral imagery also. The method uses occasional observations of reference panel training data from within the same or other datasets, which enables a practical field protocol that minimises in-field manual labour. This paper tests the new approach, comparing it against traditional methods. Several illumination compensation protocols for high volume ground based data collection are presented based on the results. The findings in this paper are

Design and analysis of a cross-type structured-illumination confocal microscope for high speed and high resolution

International Nuclear Information System (INIS)

Kim, Young-Duk; Ahn, MyoungKi; Kim, Taejoong; Gweon, DaeGab; Yoo, Hongki

2012-01-01

There have been many studies about a super resolution microscope for many years. A super resolution microscope can detect the physical phenomena or morphology of a biological sample more precisely than conventional microscopes. The structured-illumination microscope (SIM) is one of the technologies that demonstrate super resolution. However, the conventional SIM requires more time to obtain one resolution-enhanced image than other super resolution microscopes. More specifically, the conventional SIM uses three images with a 120° phase difference for each direction and three different directions are image-processed to make one resolution enhancement by increasing the optical transfer function in three directions. In this paper, we present a novel cross structured-illumination confocal microscope (CSICM) that takes the advantage of the technology of both SIM and the confocal microscope. The CSICM uses only two directions with three phase difference images, for a total of six images. By reducing the number of images that must be obtained, the total image acquisition time and image reconstruction time in obtaining the final output images can be decreased, and the confocal microscope provides axial information of the sample automatically. We demonstrate our method of cross illumination and evaluate the performance of the CSICM and compare it to the conventional SIM and the confocal microscope. (paper)

Hybrid illumination systems for a brigth future

DEFF Research Database (Denmark)

Bjarklev, Araceli

Problem to be adressed: Even with the implementation of the Eco-design directive (2005/32/EC) it is projected that the 20% energy reduction goal will not be reached in 2020. as a matter of fact, the electricity consumption in the illumination sector will not be changed from the levels of cosnsump...... of an interdisciplinary group, we aim to make a prototype of a test system. for this we will merge Solid State and Fiber optic technologies. The overall project will be assessed under  the viewpoints of environmental, socio-economic and esthetical parameters...

Large Volume, Behaviorally-relevant Illumination for Optogenetics in Non-human Primates.

Science.gov (United States)

Acker, Leah C; Pino, Erica N; Boyden, Edward S; Desimone, Robert

2017-10-03

This protocol describes a large-volume illuminator, which was developed for optogenetic manipulations in the non-human primate brain. The illuminator is a modified plastic optical fiber with etched tip, such that the light emitting surface area is > 100x that of a conventional fiber. In addition to describing the construction of the large-volume illuminator, this protocol details the quality-control calibration used to ensure even light distribution. Further, this protocol describes techniques for inserting and removing the large volume illuminator. Both superficial and deep structures may be illuminated. This large volume illuminator does not need to be physically coupled to an electrode, and because the illuminator is made of plastic, not glass, it will simply bend in circumstances when traditional optical fibers would shatter. Because this illuminator delivers light over behaviorally-relevant tissue volumes (≈ 10 mm 3 ) with no greater penetration damage than a conventional optical fiber, it facilitates behavioral studies using optogenetics in non-human primates.

Open science, e-science and the new technologies: Challenges and old problems in qualitative research in the social sciences

Directory of Open Access Journals (Sweden)

Ercilia García-Álvarez

2012-12-01

Full Text Available Purpose: As well as introducing the articles in the special issue titled "Qualitative Research in the Social Sciences", this article reviews the challenges, problems and main advances made by the qualitative paradigm in the context of the new European science policy based on open science and e-Science and analysis alternative technologies freely available in the 2.0 environment and their application to fieldwork and data analysis. Design/methodology: Theoretical review. Practical implications: The article identifies open access technologies with applications in qualitative research such as applications for smartphones and tablets, web platforms and specific qualitative data analysis software, all developed in both the e-Science context and the 2.0 environment. Social implications: The article discusses the possible role to be played by qualitative research in the open science and e-Science context and considers the impact of this new context on the size and structure of research groups, the development of truly collaborative research, the emergence of new ethical problems and quality assessment in review processes in an open environment. Originality/value: The article describes the characteristics that define the new scientific environment and the challenges posed for qualitative research, reviews the latest open access technologies available to researchers in terms of their main features and proposes specific applications suitable for fieldwork and data analysis.

Study on improvement of continuous hydrogen production by photosynthetic biofilm in interior illuminant reactor.

Science.gov (United States)

Liu, Wenhui; Yuan, Linjiang; Wei, Bo

2016-09-01

In the present study, a new type of interior optical fiber illuminating reactor was developed for H2 production to solve the problem of luminous intensity attenuation at the center portion of a reactor, and an immobilization technique was used to enhance the stability of a continuous hydrogen production process with attached photosynthetic bacteria, using glucose as a sole carbon substrate for the indigenous photosynthetic bacteria (PSB) Rhodopseudomonas palustris SP-6. Results of the experiments showed that the interior optical fiber illuminating reactor produces H2 more efficiently and productively than the exterior light source reactor, with the cumulative H2 production, the maximum H2 production rate and H2 yield increased by 813ml, 11.3ml l-1 h-1 and 22.3%, respectively. The stability of the product of continuous hydrogen was realized by immobilizing PSB on the surface of powder active carbon(PAC). After adding the dosage of 2.0g l-1 PAC, the continuous steady operation of H2 production gave a high H2 yield of 1.398 mol H2 mol-1 glucose and an average H2 production rate of 35.1ml l-1 h-1 illuminating with a single interior optical fiber light source. Meanwhile, a higher H2 yield of 1.495 mol H2 mol-1 glucose and an average H2 production rate of 38.7ml l-1 h-1 were attained illuminating with a compound lamp in the continuous H2 production for 20 days.

Using Qualitative Research to Assess Teaching and Learning in Technology-Infused TILE Classrooms

Science.gov (United States)

Van Horne, Sam; Murniati, Cecilia Titiek; Saichaie, Kem; Jesse, Maggie; Florman, Jean C.; Ingram, Beth F.

2014-01-01

This chapter describes the results of an assessment project whose purpose was to improve the faculty-development program for instructors who teach in technology-infused TILE (Transform, Interact, Learn, Engage) classrooms at the University of Iowa. Qualitative research methods were critical for (1) learning about how students and instructors…

Effects of illumination on image reconstruction via Fourier ptychography

Science.gov (United States)

Cao, Xinrui; Sinzinger, Stefan

2017-12-01

The Fourier ptychographic microscopy (FPM) technique provides high-resolution images by combining a traditional imaging system, e.g. a microscope or a 4f-imaging system, with a multiplexing illumination system, e.g. an LED array and numerical image processing for enhanced image reconstruction. In order to numerically combine images that are captured under varying illumination angles, an iterative phase-retrieval algorithm is often applied. However, in practice, the performance of the FPM algorithm degrades due to the imperfections of the optical system, the image noise caused by the camera, etc. To eliminate the influence of the aberrations of the imaging system, an embedded pupil function recovery (EPRY)-FPM algorithm has been proposed [Opt. Express 22, 4960-4972 (2014)]. In this paper, we study how the performance of FPM and EPRY-FPM algorithms are affected by imperfections of the illumination system using both numerical simulations and experiments. The investigated imperfections include varying and non-uniform intensities, and wavefront aberrations. Our study shows that the aberrations of the illumination system significantly affect the performance of both FPM and EPRY-FPM algorithms. Hence, in practice, aberrations in the illumination system gain significant influence on the resulting image quality.

Effects of chromatic image statistics on illumination induced color differences.

Science.gov (United States)

Lucassen, Marcel P; Gevers, Theo; Gijsenij, Arjan; Dekker, Niels

2013-09-01

We measure the color fidelity of visual scenes that are rendered under different (simulated) illuminants and shown on a calibrated LCD display. Observers make triad illuminant comparisons involving the renderings from two chromatic test illuminants and one achromatic reference illuminant shown simultaneously. Four chromatic test illuminants are used: two along the daylight locus (yellow and blue), and two perpendicular to it (red and green). The observers select the rendering having the best color fidelity, thereby indirectly judging which of the two test illuminants induces the smallest color differences compared to the reference. Both multicolor test scenes and natural scenes are studied. The multicolor scenes are synthesized and represent ellipsoidal distributions in CIELAB chromaticity space having the same mean chromaticity but different chromatic orientations. We show that, for those distributions, color fidelity is best when the vector of the illuminant change (pointing from neutral to chromatic) is parallel to the major axis of the scene's chromatic distribution. For our selection of natural scenes, which generally have much broader chromatic distributions, we measure a higher color fidelity for the yellow and blue illuminants than for red and green. Scrambled versions of the natural images are also studied to exclude possible semantic effects. We quantitatively predict the average observer response (i.e., the illuminant probability) with four types of models, differing in the extent to which they incorporate information processing by the visual system. Results show different levels of performance for the models, and different levels for the multicolor scenes and the natural scenes. Overall, models based on the scene averaged color difference have the best performance. We discuss how color constancy algorithms may be improved by exploiting knowledge of the chromatic distribution of the visual scene.

Communications and sensing of illumination contributins in a power LED lighting system

NARCIS (Netherlands)

Linnartz, J.P.M.G.; Feri, L.; Yang, Hongming; Colak, S.B.; Schenk, T.C.W.

2008-01-01

In recent years, LED technology emerged as a prime candidate for the future illumination light source, due to high energy efficiency and long life time. In addition, LEDs offer a superior flexibility in terms of colors and shapes, which leads to a potentially infinite variety of available light

Adopting new medical technologies in Russian hospitals: what causes inefficiency? (qualitative study).

Science.gov (United States)

Shishkin, Sergey; Zasimova, Liudmila

2018-01-01

The adoption of new medical technologies often generates losses in efficiency associated with the excess or insufficient acquisition of new equipment, an inappropriate choice (in terms of economic and clinical parameters) of medical equipment, and its poor use. Russia is a good example for exploring the problem of the ineffective adoption of new medical technologies due to the massive public investment in new equipment for medical institutions in 2006-2013. This study examines the procurement of new technologies in Russian hospitals to find the main causes of inefficiency. The research strategy was based on in-depth semistructured interviews with representatives of prominent actors (regional health care authorities, hospital executives, senior physicians). The main result is that inefficiencies arise from the contradiction between hospitals' and authorities' motivation for acquiring new technologies: hospitals tend to adopt technologies which bring benefits to their department heads and physicians and minimize maintenance and servicing costs, while the authorities' main concern is the initial cost of the technology.

Enhanced xylene removal by photocatalytic oxidation using fiber-illuminated honeycomb reactor at ppb level

International Nuclear Information System (INIS)

Wu, Yi-Ting; Yu, Yi-Hui; Nguyen, Van-Huy; Lu, Kung-Te; Wu, Jeffrey Chi-Sheng; Chang, Luh-Maan; Kuo, Chi-Wen

2013-01-01

Graphical abstract: We have designed a fiber-illuminated honeycomb reactor (FIHR) in which the removal efficiency of m-xylene is significantly enhanced to 96.5% as compared to 22.0% for UV irradiation only. The results indicate that photocatalysts not only play the role to substantially oxidize m-xylene, but also alter the chemical properties of xylene under UV illumination. -- Highlights: • The combination of optical fiber and honeycomb significantly enhanced the performance of VOCs photodegradation. • The removal efficiency of m-xylene is enhanced to 96.5% as compared to 22.0% for UV irradiation alone. • Fiber-illuminated honeycomb reactor is the first step toward an industrial-scale technology on the removal of xylene. -- Abstract: The removal of volatile organic compounds (VOCs) at ppb level is one of the most critical challenges in clean rooms for the semiconductor industry. Photocatalytic oxidation is an innovative and promising technology for ppb-level VOCs degradation. We have designed a fiber-illuminated honeycomb reactor (FIHR) in which the removal efficiency of m-xylene is significantly enhanced to 96.5% as compared to 22.0% for UV irradiation only. The results indicate that photocatalysts not only play the role to substantially oxidize m-xylene, but also alter the chemical properties of xylene under UV illumination. Using the FIHR with Mn-TiO 2 photocatalyst not only increased the m-xylene removal efficiency, but also increased the CO 2 selectivity. Interestingly, Mn-TiO 2 in FIHR also showed a very good reusability, 93% removal efficiency was still achieved in 72-h in reaction. Thus, the FIHR gave very high removal efficiency for xylene at ppb level under room temperature. The FIHR has great potential application in the clean room for the air purification system in the future

Enhanced xylene removal by photocatalytic oxidation using fiber-illuminated honeycomb reactor at ppb level

Energy Technology Data Exchange (ETDEWEB)

Wu, Yi-Ting [Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan (China); Yu, Yi-Hui [Department of Civil Engineering, National Taiwan University, Taipei 106, Taiwan (China); Nguyen, Van-Huy [Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 10617, Taiwan (China); Lu, Kung-Te [Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan (China); Wu, Jeffrey Chi-Sheng, E-mail: cswu@ntu.edu.tw [Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan (China); Chang, Luh-Maan [Department of Civil Engineering, National Taiwan University, Taipei 106, Taiwan (China); Kuo, Chi-Wen [Taiwan Semiconductor Manufacturing Company, Hsinchu 30078, Taiwan (China)

2013-11-15

Graphical abstract: We have designed a fiber-illuminated honeycomb reactor (FIHR) in which the removal efficiency of m-xylene is significantly enhanced to 96.5% as compared to 22.0% for UV irradiation only. The results indicate that photocatalysts not only play the role to substantially oxidize m-xylene, but also alter the chemical properties of xylene under UV illumination. -- Highlights: • The combination of optical fiber and honeycomb significantly enhanced the performance of VOCs photodegradation. • The removal efficiency of m-xylene is enhanced to 96.5% as compared to 22.0% for UV irradiation alone. • Fiber-illuminated honeycomb reactor is the first step toward an industrial-scale technology on the removal of xylene. -- Abstract: The removal of volatile organic compounds (VOCs) at ppb level is one of the most critical challenges in clean rooms for the semiconductor industry. Photocatalytic oxidation is an innovative and promising technology for ppb-level VOCs degradation. We have designed a fiber-illuminated honeycomb reactor (FIHR) in which the removal efficiency of m-xylene is significantly enhanced to 96.5% as compared to 22.0% for UV irradiation only. The results indicate that photocatalysts not only play the role to substantially oxidize m-xylene, but also alter the chemical properties of xylene under UV illumination. Using the FIHR with Mn-TiO{sub 2} photocatalyst not only increased the m-xylene removal efficiency, but also increased the CO{sub 2} selectivity. Interestingly, Mn-TiO{sub 2} in FIHR also showed a very good reusability, 93% removal efficiency was still achieved in 72-h in reaction. Thus, the FIHR gave very high removal efficiency for xylene at ppb level under room temperature. The FIHR has great potential application in the clean room for the air purification system in the future.

Influence of illumination on the output characteristics in pentacene thin film transistors

Energy Technology Data Exchange (ETDEWEB)

Lin, Yow-Jon, E-mail: rzr2390@yahoo.com.tw; Huang, Bo-Chieh

2013-10-01

The influence of illumination on the output characteristics of pentacene-based organic thin film transistors (OTFTs) was researched in this study. It is shown that light illumination may lead to an increase in the drain current, shifting the threshold voltage towards positive gate–source voltages. This is because of the light-induced acceptor activation, which is a new concept for illumination-dependent output characteristics of OTFTs. However, the field-effect mobility is insensitive to light illumination. It is found that electron trapping is responsible for the experimentally observed illumination-dependent output behavior of charge transport in OTFTs. - Highlights: • Light illumination may lead to an increase in the drain current. • This is because of the light-induced acceptor activation. • The field-effect mobility is insensitive to light illumination. • Electron trapping is responsible for the illumination-dependent output behavior.

Qualitative dosimetric system for radiation processing. Technology for pilot scale preparation

International Nuclear Information System (INIS)

Moraru, R.

1998-01-01

Good manufacturing practice for radiation processing requires a very strictly tracking of the processed products. A method of labelling and identification of the irradiated and nonirradiated products is required. The qualitative dosimetric system provides a fast method for monitoring the product flow. Such dosimeters are attached on each product box, usually as labels, and offer a YES/NO information about the passing of products through the radiation field. Usually, this information consists in a change of colour. The qualitative dosimetric system that we realised is based on the degradation of polyvinylchloride (PVC) under radiation field. An amount of hydrochloric acid is released in this reaction. A pH indicator, included in the system, changes its colour at different absorbed dose. The changes of colour happened in a certain pH interval called turning range. We used as pH indicator the RED CONGO colorant with turning range of pH = 3 to 5 (from blue to red). A schematic view of the qualitative dosimeter is given. The initial colour is red and it continuously changes to brown, at 1 kGy absorbed dose, and to blue-green, for 5-100 kGy. The main features of this qualitative dosimetric system are: - Quick and easy to read information about product passing through radiation field; - Absorbed dose range, 1-300 kGy; - Independence of absorbed dose rate in the interval 5-100 kGy/h; - Stability, 3 year in the dark and 1 year in sun light; - Good reproducibility. The preparation technology consists in the following steps: 1. Preparation of the solutions: a) PVC in cyclohexanone solution b) RED CONGO in water solution; 2. Preparation of the system support consisting in dropping the PVC solution on adhesive labels; 3. Sample preparation consists in dropping the colorant solution on the system support; 4. Batch trial tests. The trial test was performed at IETI 10000 irradiation plant belonging to IFIN-HH and the reference absorbed dose was determined by Fricke dosimetry. The

School District Information Technology Disaster Recovery Planning: An Explanatory Case Study

Science.gov (United States)

Gray, Shaun L.

2017-01-01

Despite research and practitioner articles outlining the importance information technology disaster plans (ITDRPs) to organizational success, barriers have impeded the process of disaster preparation for Burlington County New Jersey school districts. The purpose of this explanatory qualitative case study was to understand how technology leader…

Real-time global illumination on mobile device

Science.gov (United States)

Ahn, Minsu; Ha, Inwoo; Lee, Hyong-Euk; Kim, James D. K.

2014-02-01

We propose a novel method for real-time global illumination on mobile devices. Our approach is based on instant radiosity, which uses a sequence of virtual point lights in order to represent the e ect of indirect illumination. Our rendering process consists of three stages. With the primary light, the rst stage generates a local illumination with the shadow map on GPU The second stage of the global illumination uses the re ective shadow map on GPU and generates the sequence of virtual point lights on CPU. Finally, we use the splatting method of Dachsbacher et al 1 and add the indirect illumination to the local illumination on GPU. With the limited computing resources in mobile devices, a small number of virtual point lights are allowed for real-time rendering. Our approach uses the multi-resolution sampling method with 3D geometry and attributes simultaneously and reduce the total number of virtual point lights. We also use the hybrid strategy, which collaboratively combines the CPUs and GPUs available in a mobile SoC due to the limited computing resources in mobile devices. Experimental results demonstrate the global illumination performance of the proposed method.

A Real-Time Angle- and Illumination-Aware Face Recognition System Based on Artificial Neural Network

Directory of Open Access Journals (Sweden)

Hisateru Kato

2012-01-01

Full Text Available Automatic authentication systems, using biometric technology, are becoming increasingly important with the increased need for person verification in our daily life. A few years back, fingerprint verification was done only in criminal investigations. Now fingerprints and face images are widely used in bank tellers, airports, and building entrances. Face images are easy to obtain, but successful recognition depends on proper orientation and illumination of the image, compared to the one taken at registration time. Facial features heavily change with illumination and orientation angle, leading to increased false rejection as well as false acceptance. Registering face images for all possible angles and illumination is impossible. In this work, we proposed a memory efficient way to register (store multiple angle and changing illumination face image data, and a computationally efficient authentication technique, using multilayer perceptron (MLP. Though MLP is trained using a few registered images with different orientation, due to generalization property of MLP, interpolation of features for intermediate orientation angles was possible. The algorithm is further extended to include illumination robust authentication system. Results of extensive experiments verify the effectiveness of the proposed algorithm.

Key beliefs influencing young drivers' engagement with social interactive technology on their smartphones: A qualitative study.

Science.gov (United States)

Gauld, Cassandra S; Lewis, Ioni M; White, Katherine M; Watson, Barry

2016-01-01

The main aim of this study was to identify young drivers' underlying beliefs (i.e., behavioral, normative, and control) regarding initiating, monitoring/reading, and responding to social interactive technology (i.e., functions on a Smartphone that allow the user to communicate with other people). This qualitative study was a beliefs elicitation study in accordance with the theory of planned behavior and sought to elicit young drivers' behavioral (i.e., advantages, disadvantages), normative (i.e., who approves, who disapproves), and control beliefs (i.e., barriers, facilitators) that underpin social interactive technology use while driving. Young drivers (N = 26) aged 17 to 25 years took part in an interview or focus group discussion. Though differences emerged between the 3 behaviors of initiating, monitoring/reading, and responding for each of the behavioral, normative, and control belief categories, the strongest distinction was within the behavioral beliefs category (e.g., communicating with the person that they were on the way to meet was an advantage of initiating; being able to determine whether to respond was an advantage of monitoring/reading; and communicating with important people was an advantage of responding). Normative beliefs were similar for initiating and responding behaviors (e.g., friends and peers more likely to approve than other groups) and differences emerged for monitoring/reading (e.g., parents were more likely to approve of this behavior than initiating and responding). For control beliefs, there were differences between the beliefs regarding facilitators of these behaviors (e.g., familiar roads and conditions facilitated initiating; having audible notifications of an incoming communication facilitated monitoring/reading; and receiving a communication of immediate importance facilitated responding); however, the control beliefs that presented barriers were consistent across the 3 behaviors (e.g., difficult traffic/road conditions). The

Study on light and thermal energy of illumination device for plant factory design

Science.gov (United States)

Yoshida, A.; Moriuchi, K.; Ueda, Y.; Kinoshita, S.

2018-01-01

To investigate the effect of illumination devices on the yield of crops cultivated in a plant factory, it is necessary to measure the actual cultivation environmental factors related to the plant growth and understand the distribution ratio of light and thermal energy to the electrical energy injected into the illumination device. Based on cultivation results, we found that light intensity greatly affected the growth of plant weight. Regarding the selection of illumination device, its spectral components also affected the morphological change. Lighting experiments using a high frequency (Hf) fluorescent lamp and a light emitting diode (LED) bulb were performed. A certain difference was found in the distribution ratio of light energy to electrical energy between Hf and LED. It was showed that by placing the safety equipment or internal circuits outside the cultivated site, the air conditioning load could be reduced.

How to Create Business Value through Information Technology (A Case Study on Automotive Production

Directory of Open Access Journals (Sweden)

Kamran Feizi

2018-03-01

Full Text Available This study aimed at designing information technology business value model in order to explain the value of information technology in business and evaluate information technology contribution in organization function. For the purpose of a comprehensive analysis of the subject using qualitative data, the research method was set to be mixed method focusing on qualitative sequential design. The first stage of the research strategy was an exploratory single case study and for the second phase, the researchers used focus groups design. Saipa Corporation, one of the most famous firms in Iranian automotive industry, was selected as the case. The varied qualitative date were gathered through interview, document review and observation methods and were analyzed afterwards. Ultimately, the findings of the study highlighted the items and dimensions of information technology business value. This model is composed of the relationship between different dimensions of the theoretical models regarding and the share of information technology in building a business. In order to ensure research generalizability, the results of the research were compared with those in the literature review and the theoretic adequacy of the proposed framework was confirmed.

Active illumination and appearance model for face alignment

DEFF Research Database (Denmark)

Kahraman, Fatih; Gokmen, M.; Darkner, Sune

2010-01-01

Illumination conditions have an explicit effect on the performance of face recognition systems. In particular, varying the illumination upon the face imposes such, complex effects that the identification often fails to provide a stable performance level. In this paper, we propose an approach......, integrating face identity and illumination models in order to reach acceptable and stable face recognition rates. For this purpose, Active Appearance Model (A AM) and illumination model of faces are combined in order to obtain an illumination invariant face localization. The proposed method is an integrated......, is sufficient. There is no need to build complex models for illumination. As a result, this paper has presented a simple and efficient method for face modeling and face alignment in order to increase the performance of face localization by means of the proposed illumination invariant AIA method for face...

Thermal effects of white light illumination during microsurgery: clinical pilot study on the application safety of surgical microscopes.

Science.gov (United States)

Hibst, Raimund; Saal, David; Russ, Detlef; Kunzi-Rapp, Karin; Kienle, Alwin; Stock, Karl

2010-01-01

Modern operating microscopes offer high power illumination to ensure optimal visualization, but can also cause thermal damage. The aim of our study is to quantify the thermal effects in vivo and discuss conditions for safe use. In a pilot study on volunteers, we measured the temperature at the skin surface during microscope illumination, including the influence of anaesthesia and the effects of staining, draping, or moistening of the skin. Irradiation within the limit given by safety regulations (200 mW/cm(2)) results in skin surface temperature of 43 degrees C. Higher intensities (forearm 335 mW/cm(2), back 250 mW/cm(2)) are tolerated, resulting in reversible hyperaemia. At a very high illumination intensity (750 mW/cm(2)), pain occurs within 30 s at temperatures of 46 degrees C+/-1 degrees C (hand and forearm), and 43 degrees C+/-2 degrees C (back), respectively. Anaesthesia has no distinct effect on the temperature, whereas staining and drapes result in much higher temperatures (>100 degrees C). Moistening at practicable flow rates can reduce temperature efficiently when combined with a light absorbing and water absorbent drape. In conclusion, surgeons must be aware that surgical microscope illumination without protective means can cause skin temperatures to rise much above pain threshold, which in our study serves as a (conservative) benchmark for potential damage.

Qualitative and Mixed Methods Social Media Research

OpenAIRE

Chareen L. Snelson

2016-01-01

Social media technologies have attracted substantial attention among many types of users including researchers who have published studies for several years. This article presents an overview of trends in qualitative and mixed methods social media research literature published from 2007 through 2013. A collection of 229 qualitative studies were identified through a systematic literature review process. A subset of 55 of these articles report studies involving a combination of qualitative and q...

A qualitative study

African Journals Online (AJOL)

ismail - [2010

Methods: A descriptive qualitative study was carried out in Adami Tulu District of East Shoa Zone – the ... to enhance teaching learning at CBE sites and facilitate ..... on good nutrition”. ... not observing any misbehavior: “The behavior of the.

Automatic residue removal for high-NA extreme illumination

Science.gov (United States)

Moon, James; Nam, Byong-Sub; Jeong, Joo-Hong; Kong, Dong-Ho; Nam, Byung-Ho; Yim, Dong Gyu

2007-10-01

An epidemic for smaller node has been that, as the device architecture shrinks, lithography process requires high Numerical Aperture (NA), and extreme illumination system. This, in turn, creates many lithography problems such as low lithography process margin (Depth of Focus, Exposure Latitude), unstable Critical Dimension (CD) uniformity and restricted guideline for device design rule and so on. Especially for high NA, extreme illumination such as immersion illumination systems, above all the related problems, restricted design rule due to forbidden pitch is critical and crucial issue. This forbidden pitch is composed of numerous optical effects but majority of these forbidden pitch compose of photo resist residue and these residue must be removed to relieve some room for already tight design rule. In this study, we propose automated algorithm to remove photo resist residue due to high NA and extreme illumination condition. This algorithm automatically self assembles assist patterns based on the original design layout, therefore insuring the safety and simplicity of the generated assist pattern to the original design and removes any resist residue created by extreme illumination condition. Also we tested our automated algorithm on full chip FLASH memory device and showed the residue removal effect by using commercial verification tools as well as on actual test wafer.

American Illuminations

DEFF Research Database (Denmark)

Nye, David

Illuminated fêtes and civic celebrations began in Renaissance Italy and spread through the courts of Europe. Their fireworks, torches, lamps, and special effects glorified the monarch, marked the birth of a prince, or celebrated military victory. Nineteenth-century Americans rejected such monarch...

Application of Wireless Intelligent Control System for HPS Lamps and LEDs Combined Illumination in Road Tunnel

Science.gov (United States)

Lai, Jinxing; Qiu, Junling; Chen, Jianxun; Wang, Yaqiong; Fan, Haobo

2014-01-01

Because of the particularity of the environment in the tunnel, the rational tunnel illumination system should be developed, so as to optimize the tunnel environment. Considering the high cost of traditional tunnel illumination system with high-pressure sodium (HPS) lamps as well as the effect of a single light source on tunnel entrance, the energy-saving illumination system with HPS lamps and LEDs combined illumination in road tunnel, which could make full use of these two kinds of lamps, was proposed. The wireless intelligent control system based on HPS lamps and LEDs combined illumination and microcontrol unit (MCU) Si1000 wireless communication technology was designed. And the remote monitoring, wireless communication, and PWM dimming module of this system were designed emphatically. Intensity detector and vehicle flow detector can be configured in wireless intelligent control system, which gather the information to the master control unit, and then the information is sent to the monitoring center through the Ethernet. The control strategies are got by the monitoring center according to the calculated results, and the control unit wirelessly sends parameters to lamps, which adjust the luminance of each segment of the tunnel and realize the wireless intelligent control of combined illumination in road tunnel. PMID:25587266

Novel technique for solar power illumination using plastic optical fibres

Science.gov (United States)

Munisami, J.; Kalymnios, D.

2008-09-01

Plastic Optical Fibres (POF) were developed almost 3 decades ago. They are mainly used for short haul data communications (up to 1 km with data rates up to 1 Gbps). Over the years, POF has found applications in many other areas including solar energy transport for illumination. In such an application, light is collected from the sun and is directed into a space which needs to be illuminated. The use of fibres and more specifically POF, in daylighting systems, started only a few years ago. Several approaches have been investigated and we have seen the development of a few commercial products. The market however, has not really taken off for these technologies simply because of their enormous price tags. It is important to note that the use of POF in these designs has been limited to the function of POF as the transmission medium only. We propose a novel solar illumination technique using POF as both the light collecting/concentrating mechanism and the transmission medium. By modifying the structure of the fibre, solar light can be directed into the fibre by using an analogous process to fibre side emission but, in the reverse. We shall report on the solar light capturing efficiency of POF as modified by several types of external imperfections introduced onto the fibre. One major advantage of our proposed approach lies in the fact that we aim to eliminate at least one of the two axes of sun tracking that is currently used in existing solar illumination systems.

Advancing the Science of Qualitative Research to Promote Health Equity.

Science.gov (United States)

Griffith, Derek M; Shelton, Rachel C; Kegler, Michelle

2017-10-01

Qualitative methods have long been a part of health education research, but how qualitative approaches advance health equity has not been well described. Qualitative research is an increasingly important methodologic tool to use in efforts to understand, inform, and advance health equity. Qualitative research provides critical insight into the subjective meaning and context of health that can be essential for understanding where and how to intervene to inform health equity research and practice. We describe the larger context for this special theme issue of Health Education & Behavior, provide brief overviews of the 15 articles that comprise the issue, and discuss the promise of qualitative research that seeks to contextualize and illuminate answers to research questions in efforts to promote health equity. We highlight the critical role that qualitative research can play in considering and incorporating a diverse array of contextual information that is difficult to capture in quantitative research.

Getting added value from using qualitative research with randomized controlled trials: a qualitative interview study

Science.gov (United States)

2014-01-01

Background Qualitative research is undertaken with randomized controlled trials of health interventions. Our aim was to explore the perceptions of researchers with experience of this endeavour to understand the added value of qualitative research to the trial in practice. Methods A telephone semi-structured interview study with 18 researchers with experience of undertaking the trial and/or the qualitative research. Results Interviewees described the added value of qualitative research for the trial, explaining how it solved problems at the pretrial stage, explained findings, and helped to increase the utility of the evidence generated by the trial. From the interviews, we identified three models of relationship of the qualitative research to the trial. In ‘the peripheral’ model, the trial was an opportunity to undertake qualitative research, with no intention that it would add value to the trial. In ‘the add-on’ model, the qualitative researcher understood the potential value of the qualitative research but it was viewed as a separate and complementary endeavour by the trial lead investigator and wider team. Interviewees described how this could limit the value of the qualitative research to the trial. Finally ‘the integral’ model played out in two ways. In ‘integral-in-theory’ studies, the lead investigator viewed the qualitative research as essential to the trial. However, in practice the qualitative research was under-resourced relative to the trial, potentially limiting its ability to add value to the trial. In ‘integral-in-practice’ studies, interviewees described how the qualitative research was planned from the beginning of the study, senior qualitative expertise was on the team from beginning to end, and staff and time were dedicated to the qualitative research. In these studies interviewees described the qualitative research adding value to the trial although this value was not necessarily visible beyond the original research team due

Getting added value from using qualitative research with randomized controlled trials: a qualitative interview study.

Science.gov (United States)

O'Cathain, Alicia; Goode, Jackie; Drabble, Sarah J; Thomas, Kate J; Rudolph, Anne; Hewison, Jenny

2014-06-09

Qualitative research is undertaken with randomized controlled trials of health interventions. Our aim was to explore the perceptions of researchers with experience of this endeavour to understand the added value of qualitative research to the trial in practice. A telephone semi-structured interview study with 18 researchers with experience of undertaking the trial and/or the qualitative research. Interviewees described the added value of qualitative research for the trial, explaining how it solved problems at the pretrial stage, explained findings, and helped to increase the utility of the evidence generated by the trial. From the interviews, we identified three models of relationship of the qualitative research to the trial. In 'the peripheral' model, the trial was an opportunity to undertake qualitative research, with no intention that it would add value to the trial. In 'the add-on' model, the qualitative researcher understood the potential value of the qualitative research but it was viewed as a separate and complementary endeavour by the trial lead investigator and wider team. Interviewees described how this could limit the value of the qualitative research to the trial. Finally 'the integral' model played out in two ways. In 'integral-in-theory' studies, the lead investigator viewed the qualitative research as essential to the trial. However, in practice the qualitative research was under-resourced relative to the trial, potentially limiting its ability to add value to the trial. In 'integral-in-practice' studies, interviewees described how the qualitative research was planned from the beginning of the study, senior qualitative expertise was on the team from beginning to end, and staff and time were dedicated to the qualitative research. In these studies interviewees described the qualitative research adding value to the trial although this value was not necessarily visible beyond the original research team due to the challenges of publishing this research

IR Image upconversion using band-limited ASE illumination fiber sources.

Science.gov (United States)

Maestre, H; Torregrosa, A J; Capmany, J

2016-04-18

We study the field-of-view (FOV) of an upconversion imaging system that employs an Amplified Spontaneous Emission (ASE) fiber source to illuminate a transmission target. As an intermediate case between narrowband laser and thermal illumination, an ASE fiber source allows for higher spectral intensity than thermal illumination and still keeps a broad wavelength spectrum to take advantage of an increased non-collinear phase-matching angle acceptance that enlarges the FOV of the upconversion system when compared to using narrowband laser illumination. A model is presented to predict the angular acceptance of the upconverter in terms of focusing and ASE spectral width and allocation. The model is experimentally checked in case of 1550-630 nm upconversion.

Intensive care nurses' perceptions of simulation-based team training for building patient safety in intensive care: a descriptive qualitative study.

Science.gov (United States)

Ballangrud, Randi; Hall-Lord, Marie Louise; Persenius, Mona; Hedelin, Birgitta

2014-08-01

To describe intensive care nurses' perceptions of simulation-based team training for building patient safety in intensive care. Failures in team processes are found to be contributory factors to incidents in an intensive care environment. Simulation-based training is recommended as a method to make health-care personnel aware of the importance of team working and to improve their competencies. The study uses a qualitative descriptive design. Individual qualitative interviews were conducted with 18 intensive care nurses from May to December 2009, all of which had attended a simulation-based team training programme. The interviews were analysed by qualitative content analysis. One main category emerged to illuminate the intensive care nurse perception: "training increases awareness of clinical practice and acknowledges the importance of structured work in teams". Three generic categories were found: "realistic training contributes to safe care", "reflection and openness motivates learning" and "finding a common understanding of team performance". Simulation-based team training makes intensive care nurses more prepared to care for severely ill patients. Team training creates a common understanding of how to work in teams with regard to patient safety. Copyright © 2014 Elsevier Ltd. All rights reserved.

Hybrid daylight/light-emitting diode illumination system for indoor lighting.

Science.gov (United States)

Ge, Aiming; Qiu, Peng; Cai, Jinlin; Wang, Wei; Wang, Junwei

2014-03-20

A hybrid illumination method using both daylight and light-emitting diodes (LEDs) for indoor lighting is presented in this study. The daylight can be introduced into the indoor space by a panel-integration system. The daylight part and LEDs are combined within a specific luminaire that can provide uniform illumination. The LEDs can be turned on and dimmed through closed-loop control when the daylight illuminance is inadequate. We simulated the illumination and calculated the indoor lighting efficiency of our hybrid daylight and LED lighting system, and compared this with that of LED and fluorescent lighting systems. Simulation results show that the efficiency of the hybrid daylight/LED illumination method is better than that of LED and traditional lighting systems, under the same lighting conditions and lighting time; the method has hybrid lighting average energy savings of T5 66.28%, and that of the LEDs is 41.62%.

Catalyzed reactions at illuminated semiconductor interfaces

International Nuclear Information System (INIS)

Wrighton, M.S.

1984-01-01

Many desirable minority carrier chemical redox processes are too slow to compete with e - -h + recombination at illuminated semiconductor/liquid electrolyte junction interfaces. Reductions of H 2 O to H 2 or CO 2 to compounds having C--H bonds are too slow to compete with e - -h + recombination at illuminated p-type semiconductors, for example. Approaches to improve the rate of the desired processes involving surface modification techniques are described. Photoanodes are plagued by the additional problem of oxidative decomposition under illumination with > or =E/sub g/ illumination. The photo-oxidation of Cl - , Br - , and H 2 O is considered to illustrate the concepts involved. Proof of concept experiments establish that catalysis can be effective in dramatically improving direct solar fuel production; efficiencies of >10% have been demonstrated

"Evaluation as Illumination: A New Approach to the Study of Innovatory Programs". Occasional Paper.

Science.gov (United States)

Parlett, Malcolm; Hamilton, David

Conventional approaches to program evaluation have followed the experimental and psychometric traditions dominant in educational research. Their aim (unfulfilled) of achieving fully objective methods had led to studies that are artificial and restricted in scope. Illuminative evaluation is introduced as a total re-appraisal of the rationale and…

Illuminating trajectories of adolescent thriving and contribution through the words of youth: qualitative findings from the 4-H Study of Positive Youth Development.

Science.gov (United States)

Hershberg, Rachel M; DeSouza, Lisette M; Warren, Amy E A; Lerner, Jacqueline V; Lerner, Richard M

2014-06-01

Theory and research in adolescent development have emphasized that contributing to self, others, and community is important to the success of society and predictive of positive youth and later adult development. Despite this emphasis, there is a lack of qualitative and youth-centered research exploring whether adolescents themselves value contribution as part of their daily lives or future goals. Understandings of contribution are, thus, limited in their generalizability. To lessen this gap, we implemented qualitative analyses of open-ended responses from youth in the 4-H Study of Positive Youth Development. We addressed questions about what is meaningful to youth and about their future goals through descriptive and thematic analyses of responses from 56 youth (66% female) who participated in the 4-H Study in each of three grades (6, 9, and 12). Findings indicated that most youth in this study valued acts and/or ideologies of contribution at some point in their adolescence, and several were committed to facets of contribution across grades. The analyses also identified other aspects of these youth experiences (e.g., athletics, family relationships, and academic competencies) that were described as meaningful across adolescence. Findings are discussed in relationship to youth programming aimed at encouraging well-being and contribution in adolescence.

Endoscopic and keyhole endoscope-assisted neurosurgical approaches: a qualitative survey on technical challenges and technological solutions.

Science.gov (United States)

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-10-01

The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent theme analysis. Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches.

Measurement of illumination exposure in postpartum women

Directory of Open Access Journals (Sweden)

Stein Martin T

2003-05-01

Full Text Available Abstract Background Low levels of light exposure at critical times are thought to cause seasonal affective disorder. Investigators, in studies demonstrating the usefulness of bright light therapy, also have implicated light's role in non-seasonal depression. The precise cause of postpartum depression has not been delineated, but it seemed possible that new mothers would spend reduced time in daylight. The goal of this study was to examine the levels of illumination experienced by postpartum mothers and to discover any relationship between light exposure and mood levels experienced during the postpartum period. Methods Fifteen postpartum women, who did not have any baseline indication of depression, wore a wrist device (Actillume for 72 hours to measure their exposure to light. At the end of the recording period, they completed a self-reported measure of mood. The mean light exposure of these postpartum women (expressed as the 24-hour average logarithm of illumination in lux was compared with that of a representative sample of women of comparable age, residence, and seasonal months of recording. Mood levels were then rank-ordered and tested for correlation with light exposure levels. Results There was no significant difference between the amount of light [log10lux] experienced by postpartum (1.01 SD 0.236 and control women (1.06 SD 0.285. Mood was not correlated with illumination in the postpartum sample. Conclusions Postpartum women in San Diego did not receive reduced light, nor was low mood related to low illumination.

Illuminance: Computerized simulation

Energy Technology Data Exchange (ETDEWEB)

Barlow, A

1991-03-01

One of the main objectives of a graphics work-station is to create images that are as realistic as possible. This paper reviews and assesses the state-of-the-art in the field of illuminance simulation. The techniques examined are: ray tracing, in which illuminance in a given ambient is calculated in an approximate way by tracing individual rays of light; the 'radiosity' (a term combining surface radiancy and reflectivity) method, based on the calculation of the ambient's thermodynamics and which considers the effects of different surface colours; progressive improvement, in which 'radiosity' is calculated step by step with increasing levels of detail. The Gouraud and Phong methods of representing the effects of shade are also compared.

Experimental studies illuminate the cultural transmission of percussive technologies in Homo and Pan.

Science.gov (United States)

Whiten, Andrew

2015-11-19

The complexity of Stone Age tool-making is assumed to have relied upon cultural transmission, but direct evidence is lacking. This paper reviews evidence bearing on this question provided through five related empirical perspectives. Controlled experimental studies offer special power in identifying and dissecting social learning into its diverse component forms, such as imitation and emulation. The first approach focuses on experimental studies that have discriminated social learning processes in nut-cracking by chimpanzees. Second come experiments that have identified and dissected the processes of cultural transmission involved in a variety of other force-based forms of chimpanzee tool use. A third perspective is provided by field studies that have revealed a range of forms of forceful, targeted tool use by chimpanzees, that set percussion in its broader cognitive context. Fourth are experimental studies of the development of flint knapping to make functional sharp flakes by bonobos, implicating and defining the social learning and innovation involved. Finally, new and substantial experiments compare what different social learning processes, from observational learning to teaching, afford good quality human flake and biface manufacture. Together these complementary approaches begin to delineate the social learning processes necessary to percussive technologies within the Pan-Homo clade. © 2015 The Author(s).

Organizational Influences in Technology Adoption Decisions: A Case Study of Digital Libraries

Science.gov (United States)

Oguz, Fatih

2016-01-01

The purpose of this study was to understand the organizational level decision factors in technology adoption in the context of digital libraries. A qualitative case study approach was used to investigate the adoption of a specific technology, XML-based Web services, in digital libraries. Rogers' diffusion of innovations and Wenger's communities of…

Antibacterial effect of light emitting diodes of visible wavelengths on selected foodborne pathogens at different illumination temperatures.

Science.gov (United States)

Ghate, Vinayak S; Ng, Kheng Siang; Zhou, Weibiao; Yang, Hyunsoo; Khoo, Gek Hoon; Yoon, Won-Byong; Yuk, Hyun-Gyun

2013-09-16

The antibacterial effect of light emitting diodes (LEDs) in the visible region (461, 521 and 642 nm) of the electromagnetic spectrum was investigated on Escherichia coli O157:H7, Salmonella typhimurium, Listeria monocytogenes and Staphylococcus aureus. The irradiances of the 461, 521 and 642 nm LEDs were 22.1, 16 and 25.4 mW/cm², respectively. Bacterial cultures suspended in tryptic soy broth were illuminated by 10-watt LEDs at a distance of 4.5 cm for 7.5h at 20, 15 and 10 °C. Regardless of the bacterial strains, bacterial inactivation was observed with the range of 4.6-5.2 logCFU/ml at 10 and 15 °C after illumination with the 461 nm LED, while illumination with the 521 nm LED resulted in only 1.0-2.0 log reductions after 7.5h. On the other hand, no antibacterial effect was observed using the 642 nm LED treatment. The photodynamic inactivation by 461 and 521 nm LEDs was found to be greater at the set temperatures of 10 and 15 °C than at 20 °C. The D-values for the four bacterial strains at 10 and 15 °C after the illumination of 461 nm LED ranged from 1.29 to 1.74 h, indicating that there was no significant difference in the susceptibility of the bacterial strains to the LED illumination between 10 and 15 °C, except for L. monocytogenes. Regardless of the illumination temperature, sublethal injury was observed in all bacterial strains during illumination with the 461 and the 521 nm LED and the percentage of injured cells increased as the treatment time increased. Thus, the results show that the antibacterial effect of the LEDs was highly dependent on the wavelength and the illumination temperature. This study suggests the potential of 461 and 521 nm LEDs in combination with chilling to be used as a novel food preservation technology. © 2013 Elsevier B.V. All rights reserved.

Spectrally optimal illuminations for diabetic retinopathy detection in retinal imaging

Science.gov (United States)

Bartczak, Piotr; Fält, Pauli; Penttinen, Niko; Ylitepsa, Pasi; Laaksonen, Lauri; Lensu, Lasse; Hauta-Kasari, Markku; Uusitalo, Hannu

2017-04-01

Retinal photography is a standard method for recording retinal diseases for subsequent analysis and diagnosis. However, the currently used white light or red-free retinal imaging does not necessarily provide the best possible visibility of different types of retinal lesions, important when developing diagnostic tools for handheld devices, such as smartphones. Using specifically designed illumination, the visibility and contrast of retinal lesions could be improved. In this study, spectrally optimal illuminations for diabetic retinopathy lesion visualization are implemented using a spectrally tunable light source based on digital micromirror device. The applicability of this method was tested in vivo by taking retinal monochrome images from the eyes of five diabetic volunteers and two non-diabetic control subjects. For comparison to existing methods, we evaluated the contrast of retinal images taken with our method and red-free illumination. The preliminary results show that the use of optimal illuminations improved the contrast of diabetic lesions in retinal images by 30-70%, compared to the traditional red-free illumination imaging.

Barriers and benefits to using mobile health technology after operation: A qualitative study.

Science.gov (United States)

Abelson, Jonathan S; Kaufman, Elinore; Symer, Matthew; Peters, Alexander; Charlson, Mary; Yeo, Heather

2017-09-01

Recently, mobile health technology has emerged as a promising avenue for improving physician-patient communication and patient outcomes. The objective of our study was to determine the public's perception of barriers and benefits to using mobile health technology technologies to enhance recovery after operation. We used the Empire State Poll to ask 2 open-ended questions to 800 participants assessing their perceptions of benefits and barriers to use mobile health technology after operation. All responses were coded independently, and any discrepancies were resolved by consensus. We used grounded theory to allow themes to arise from the codes. Interrater reliability was calculated using Cohen's Kappa. Participants identified a range of possible barriers to using mobile health technology apps after operation including: protecting personal health information, technology effectiveness and failure, preference for face-to-face interaction with their surgeon, level of effort required, and ability of the older adults to navigate mobile health technology. Participants identified multiple possible benefits including: better monitoring, improved communication with their surgeon, minimizing follow-up visits, improved convenience, and increased patient knowledge. In the study, 15% of all respondents stated there were no barriers whereas 6% stated there were no benefits. Participants were receptive to the many potential benefits of this technology to enhance not only their relationships with providers and the convenience of access, but also their health outcomes. We must address participants concerns about data security and their fears of losing a personal relationship with their doctor. Copyright © 2017 Elsevier Inc. All rights reserved.

Bessel light sheet structured illumination microscopy

Science.gov (United States)

Noshirvani Allahabadi, Golchehr

Biomedical study researchers using animals to model disease and treatment need fast, deep, noninvasive, and inexpensive multi-channel imaging methods. Traditional fluorescence microscopy meets those criteria to an extent. Specifically, two-photon and confocal microscopy, the two most commonly used methods, are limited in penetration depth, cost, resolution, and field of view. In addition, two-photon microscopy has limited ability in multi-channel imaging. Light sheet microscopy, a fast developing 3D fluorescence imaging method, offers attractive advantages over traditional two-photon and confocal microscopy. Light sheet microscopy is much more applicable for in vivo 3D time-lapsed imaging, owing to its selective illumination of tissue layer, superior speed, low light exposure, high penetration depth, and low levels of photobleaching. However, standard light sheet microscopy using Gaussian beam excitation has two main disadvantages: 1) the field of view (FOV) of light sheet microscopy is limited by the depth of focus of the Gaussian beam. 2) Light-sheet images can be degraded by scattering, which limits the penetration of the excitation beam and blurs emission images in deep tissue layers. While two-sided sheet illumination, which doubles the field of view by illuminating the sample from opposite sides, offers a potential solution, the technique adds complexity and cost to the imaging system. We investigate a new technique to address these limitations: Bessel light sheet microscopy in combination with incoherent nonlinear Structured Illumination Microscopy (SIM). Results demonstrate that, at visible wavelengths, Bessel excitation penetrates up to 250 microns deep in the scattering media with single-side illumination. Bessel light sheet microscope achieves confocal level resolution at a lateral resolution of 0.3 micron and an axial resolution of 1 micron. Incoherent nonlinear SIM further reduces the diffused background in Bessel light sheet images, resulting in

Perceived improvement in integrated management of childhood illness implementation through use of mobile technology: qualitative evidence from a pilot study in Tanzania.

Science.gov (United States)

Mitchell, Marc; Getchell, Maya; Nkaka, Melania; Msellemu, Daniel; Van Esch, Jan; Hedt-Gauthier, Bethany

2012-01-01

This study examined health care provider and caretaker perceptions of electronic Integrated Management of Childhood Illness (eIMCI) in diagnosing and treating childhood illnesses. The authors conducted semi-structured interviews among caretakers (n = 20) and health care providers (n = 11) in the Pwani region of Tanzania. This qualitative study was nested within a larger quantitative study measuring impact of eIMCI on provider adherence to IMCI protocols. Caretakers and health care workers involved in the larger study provided their perceptions of eIMCI in comparison with the conventional paper forms. One health care provider from each participating health center participated in qualitative interviews; 20 caretakers were selected from 1 health center involved in the quantitative study. Interviews were conducted in Swahili and lasted 5-10 min each. Providers expressed positive opinions of eIMCI, noting that the personal digital assistants were faster and easier to use than were the paper forms and encouraged adherence to IMCI procedures. Caretakers also held a positive view of eIMCI, noting improved service from providers, more thorough examination of their child, and a perception that providers who used the personal digital assistants were more knowledgeable. Research indicates widespread nonadherence to IMCI guidelines, suggesting improved methods for implementing IMCI are necessary. The authors conclude that eIMCI represents a promising method for improving health care delivery because it improves health care provider and caretaker perception of the clinical encounter. Further investigation into this technology is warranted.

Qualitative Research in Educational Communications and Technology: A Brief Introduction to Principles and Procedures

Science.gov (United States)

Neuman, Delia

2014-01-01

Over the past 30 years, qualitative research has emerged as a widely accepted alternative to the quantitative paradigm for performing research in educational communications and technology. As the new paradigm has evolved, it has spawned a variety of theoretical perspectives and methodological techniques that have both increased its potential…

Illumination correction in psoriasis lesions images

DEFF Research Database (Denmark)

Maletti, Gabriela Mariel; Ersbøll, Bjarne Kjær

2003-01-01

An approach to automatically correct illumination problems in dermatological images is presented. The illumination function is estimated after combining the thematic map indicating skin-produced by an automated classification scheme- with the dermatological image data. The user is only required t...

AN ILLUMINATION INVARIANT TEXTURE BASED FACE RECOGNITION

Directory of Open Access Journals (Sweden)

K. Meena

2013-11-01

Full Text Available Automatic face recognition remains an interesting but challenging computer vision open problem. Poor illumination is considered as one of the major issue, since illumination changes cause large variation in the facial features. To resolve this, illumination normalization preprocessing techniques are employed in this paper to enhance the face recognition rate. The methods such as Histogram Equalization (HE, Gamma Intensity Correction (GIC, Normalization chain and Modified Homomorphic Filtering (MHF are used for preprocessing. Owing to great success, the texture features are commonly used for face recognition. But these features are severely affected by lighting changes. Hence texture based models Local Binary Pattern (LBP, Local Derivative Pattern (LDP, Local Texture Pattern (LTP and Local Tetra Patterns (LTrPs are experimented under different lighting conditions. In this paper, illumination invariant face recognition technique is developed based on the fusion of illumination preprocessing with local texture descriptors. The performance has been evaluated using YALE B and CMU-PIE databases containing more than 1500 images. The results demonstrate that MHF based normalization gives significant improvement in recognition rate for the face images with large illumination conditions.

Leadership skills for the California electric utility industry: A qualitative study

Science.gov (United States)

Hubbell, Michael

The purpose of this qualitative study was to determine the skills and knowledge necessary for leaders in the California electric utility industry in 2020. With rapid industry changes, skills to effectively lead and stay competitive are undetermined. Leaders must manage an increasingly hostile social and political environment, incorporate new technology, and deal with an aging workforce and infrastructure. Methodology. This study utilized a qualitative case study design to determine the factors that influence the skills leaders will require in 2020. It incorporated the perspectives of current electric utility leaders while looking with a future lens. Findings. Interviews were conducted with transmission and distribution (T&D) directors at 3 investor-owned public electric utilities headquartered in California. The questions followed an open-ended format to gather responses as perceived by electric utility leaders for each research question category: overall skills, aging workforce, regulation, technology, and leading younger generations. The research resulted in 18 major themes: 5 for overall skills, 3 for aging workforce, 4 for regulation, 3 for technology, and 3 for leading younger generations. Conclusions. The study identified leadership skills including the ability to embrace, leverage, and stay current with technology; understand and provide a clear vision for the future; increase creativity; manage the next set of workers; motivate during a time of great change; prepare for knowledge transfer and change in workforce culture; manage regulatory expectations; expand potential utility opportunities; leverage "big data"; allow worker collaboration; and understand what drives younger generations. Recommendations. California-based electric utility leaders can remain effective by implementing key strategies identified herein. Further research could examine perspectives of additional utility leaders who lead in organizational units outside of T&D, expand the research to

Automated Field-of-View, Illumination, and Recognition Algorithm Design of a Vision System for Pick-and-Place Considering Colour Information in Illumination and Images.

Science.gov (United States)

Chen, Yibing; Ogata, Taiki; Ueyama, Tsuyoshi; Takada, Toshiyuki; Ota, Jun

2018-05-22

Machine vision is playing an increasingly important role in industrial applications, and the automated design of image recognition systems has been a subject of intense research. This study has proposed a system for automatically designing the field-of-view (FOV) of a camera, the illumination strength and the parameters in a recognition algorithm. We formulated the design problem as an optimisation problem and used an experiment based on a hierarchical algorithm to solve it. The evaluation experiments using translucent plastics objects showed that the use of the proposed system resulted in an effective solution with a wide FOV, recognition of all objects and 0.32 mm and 0.4° maximal positional and angular errors when all the RGB (red, green and blue) for illumination and R channel image for recognition were used. Though all the RGB illumination and grey scale images also provided recognition of all the objects, only a narrow FOV was selected. Moreover, full recognition was not achieved by using only G illumination and a grey-scale image. The results showed that the proposed method can automatically design the FOV, illumination and parameters in the recognition algorithm and that tuning all the RGB illumination is desirable even when single-channel or grey-scale images are used for recognition.

Hackers against technology: Critique and recuperation in technological cycles.

Science.gov (United States)

Maxigas

2017-12-01

I offer an interpretation of hackers' technological choices through a theoretical framework of critique and recuperation in technological cycles, building on prior research that brings the pragmatic sociology of Boltanski and Chiapello to bear on matters in Science and Technology Studies. I argue that contextualizing technology choices in the development of capitalism through innovation illuminates their political significance. I start with the counterintuitive observation that some browser extensions popular with hackers, like RequestPolicy, make it considerably harder for them to look at websites. This observation showcases the Luddite aspects of hackerdom, in that they are willing to 'break' popular websites that would otherwise cheat on the user. In line with an undercurrent of hacker studies, in this case study I find hackers fighting technological progress they see as social decline.

Anisotropic Density Estimation in Global Illumination

DEFF Research Database (Denmark)

Schjøth, Lars

2009-01-01

Density estimation employed in multi-pass global illumination algorithms gives cause to a trade-off problem between bias and noise. The problem is seen most evident as blurring of strong illumination features. This thesis addresses the problem, presenting four methods that reduce both noise...

Reflectance, illumination, and appearance in color constancy.

Science.gov (United States)

McCann, John J; Parraman, Carinna; Rizzi, Alessandro

2014-01-01

We studied color constancy using a pair of identical 3-D Color Mondrian displays. We viewed one 3-D Mondrian in nearly uniform illumination, and the other in directional, nonuniform illumination. We used the three dimensional structures to modulate the light falling on the painted surfaces. The 3-D structures in the displays were a matching set of wooden blocks. Across Mondrian displays, each corresponding facet had the same paint on its surface. We used only 6 chromatic, and 5 achromatic paints applied to 104 block facets. The 3-D blocks add shadows and multiple reflections not found in flat Mondrians. Both 3-D Mondrians were viewed simultaneously, side-by-side. We used two techniques to measure correlation of appearance with surface reflectance. First, observers made magnitude estimates of changes in the appearances of identical reflectances. Second, an author painted a watercolor of the 3-D Mondrians. The watercolor's reflectances quantified the changes in appearances. While constancy generalizations about illumination and reflectance hold for flat Mondrians, they do not for 3-D Mondrians. A constant paint does not exhibit perfect color constancy, but rather shows significant shifts in lightness, hue and chroma in response to the structure in the nonuniform illumination. Color appearance depends on the spatial information in both the illumination and the reflectances of objects. The spatial information of the quanta catch from the array of retinal receptors generates sensations that have variable correlation with surface reflectance. Models of appearance in humans need to calculate the departures from perfect constancy measured here. This article provides a dataset of measurements of color appearances for computational models of sensation.

Reflectance, illumination, and appearance in color constancy

Directory of Open Access Journals (Sweden)

John J. McCann

2014-01-01

Full Text Available We studied color constancy using a pair of identical 3-D Color Mondrian displays. We viewed one 3-D Mondrian in nearly uniform illumination, and the other in directional, nonuniform illumination. We used the three dimensional structures to modulate the light falling on the painted surfaces. The 3-D structures in the displays were a matching set of wooden blocks. Across Mondrian displays, each corresponding facet had the same paint on its surface. We used only 6 chromatic, and 5 achromatic paints applied to 104 block facets. The 3-D blocks add shadows and multiple reflections not found in flat Mondrians. Both 3-D Mondrians were viewed simultaneously, side-by-side. We used two techniques to measure correlation of appearance with surface reflectance. First, observers made magnitude estimates of changes in the appearances of identical reflectances. Second, an author painted a watercolor of the 3-D Mondrians. The watercolor’s reflectances quantified the changes in appearances. While constancy generalizations about illumination and reflectance hold for flat Mondrians, they do not for 3-D Mondrians. A constant paint does not exhibit perfect color constancy, but rather shows significant shifts in lightness, hue and chroma in response to the structure in the nonuniform illumination. Color appearance depends on the spatial information in both the illumination and the reflectances of objects. The spatial information of the quanta catch from the array of retinal receptors generates sensations that have variable correlation with surface reflectance. Models of appearance in humans need to calculate the departures from perfect constancy measured here. This article provides a dataset of measurements of color appearances for computational models of sensation.

New Technologies to Assist Training in Hospitality Sector

Science.gov (United States)

Balta, Sabah

2007-01-01

Hospitality sector needs new technological training tools, which can assist to improve sector employees' skills and services quality. The sector might be more interactive when these technological training tools used on the job-training program. This study addresses to issue of illumination of new technologic tools that enforce training in which…

The patient experience of high technology medical imaging: A systematic review of the qualitative evidence

International Nuclear Information System (INIS)

Munn, Zachary; Jordan, Zoe

2011-01-01

Background: When presenting to an imaging department, the person who is to be imaged is often in a vulnerable state, and can experience the scan in a number of ways. It is the role of the radiographer to produce a high quality image and facilitate patient care throughout the imaging process. A qualitative systematic review was performed to synthesise the existent evidence on the patient experience of high technology medical imaging. Only papers relating to Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) were identified. Inclusion criteria: Studies that were of a qualitative design that explored the phenomenon of interest, the patient experience of high technology medical imaging. Participants included anyone who had undergone one of these procedures. Methods: A systematic search of medical and allied health databases was conducted. Articles identified during the search process that met the inclusion criteria were then critically appraised for methodological quality independently by two reviewers. Results: During the search and inclusion process, 15 studies were found that were deemed of suitable quality to be included in the review. From the 15 studies, 127 findings were extracted from the included studies. These were analysed in more detail to observe common themes, and then grouped into 33 categories. From these 33 categories, 11 synthesised findings were produced. The 11 synthesised findings highlight the diverse, unique and challenging ways in which people experience imaging with MRI and CT scanners. Conclusion: The results of the review demonstrate the diverse ways in which people experience medical imaging. All health professionals involved in imaging need to be aware of the different ways each patient may experience imaging.

[Hygienic and environmental problems of energy-saving illumination in urbanization of Crimea].

Science.gov (United States)

Deynego, V N; Elizarov, V B; Kaptsov, V A

The article considers the problems offloodlights pollution in the territory of Crimea due to the work of illumination led equipment of the key elements of the international transport artery "China-Europe". There was performed a qualitative assessment of characteristics of led floodlights pollution on the example of the sea surface of the transport crossing through the Kerch Strait. Ichthyologists and oceanographers were shown to estimate the amount of phytoplankton biomass based on sunlight illumination. The excess dose of blue light in the spectrum of led lighting was established to have an impact on phytoplankton greater than solar and lunar light, creating preconditions for the increase of biological mass of phytoplankton and consequently to the formation of the "stern stock". Arising from additional phytoplankton biomass can significantly influence on the schedule offish migration in waters of the Kerch Strait, the biomass of mosquitoes and midges, which are prey for amphibians and birds. The decline of the both light pollution and its negative impact on fauna andflora requires the development of semiconductor sources of white light with a biologically adequate spectrum in the framework of the "Lighting of the lighting equipment of Crimea".

Understanding the Relationship between Teachers' Pedagogical Beliefs and Technology Use in Education: A Systematic Review of Qualitative Evidence

Science.gov (United States)

Tondeur, Jo; van Braak, Johan; Ertmer, Peggy A.; Ottenbreit-Leftwich, Anne

2017-01-01

This review was designed to further our understanding of the link between teachers' pedagogical beliefs and their educational uses of technology. The synthesis of qualitative findings integrates the available evidence about this relationship with the ultimate goal being to facilitate the integration of technology in education. A meta-aggregative…

Study on Low Illumination Simultaneous Polarization Image Registration Based on Improved SURF Algorithm

Science.gov (United States)

Zhang, Wanjun; Yang, Xu

2017-12-01

Registration of simultaneous polarization images is the premise of subsequent image fusion operations. However, in the process of shooting all-weather, the polarized camera exposure time need to be kept unchanged, sometimes polarization images under low illumination conditions due to too dark result in SURF algorithm can not extract feature points, thus unable to complete the registration, therefore this paper proposes an improved SURF algorithm. Firstly, the luminance operator is used to improve overall brightness of low illumination image, and then create integral image, using Hession matrix to extract the points of interest to get the main direction of characteristic points, calculate Haar wavelet response in X and Y directions to get the SURF descriptor information, then use the RANSAC function to make precise matching, the function can eliminate wrong matching points and improve accuracy rate. And finally resume the brightness of the polarized image after registration, the effect of the polarized image is not affected. Results show that the improved SURF algorithm can be applied well under low illumination conditions.

Real time global illumination using the GPU

OpenAIRE

Bengtsson, Morgan

2010-01-01

Global illumination is an important factor when striving for photo realism in computergraphics. This thesis describes why this is the case, and why global illumination is considered acomplex problem to solve. The problem becomes even more demanding when considering realtime purposes. Resent research has proven it possible to produce global illumination in realtime. Therefore the subject of this thesis is to compare and evaluate a number of those methods. An implementation is presented based o...

Three-dimensional fluorescent microscopy via simultaneous illumination and detection at multiple planes.

Science.gov (United States)

Ma, Qian; Khademhosseinieh, Bahar; Huang, Eric; Qian, Haoliang; Bakowski, Malina A; Troemel, Emily R; Liu, Zhaowei

2016-08-16

The conventional optical microscope is an inherently two-dimensional (2D) imaging tool. The objective lens, eyepiece and image sensor are all designed to capture light emitted from a 2D 'object plane'. Existing technologies, such as confocal or light sheet fluorescence microscopy have to utilize mechanical scanning, a time-multiplexing process, to capture a 3D image. In this paper, we present a 3D optical microscopy method based upon simultaneously illuminating and detecting multiple focal planes. This is implemented by adding two diffractive optical elements to modify the illumination and detection optics. We demonstrate that the image quality of this technique is comparable to conventional light sheet fluorescent microscopy with the advantage of the simultaneous imaging of multiple axial planes and reduced number of scans required to image the whole sample volume.

Ultrahigh sensitivity endoscopic camera using a new CMOS image sensor: providing with clear images under low illumination in addition to fluorescent images.

Science.gov (United States)

Aoki, Hisae; Yamashita, Hiromasa; Mori, Toshiyuki; Fukuyo, Tsuneo; Chiba, Toshio

2014-11-01

We developed a new ultrahigh-sensitive CMOS camera using a specific sensor that has a wide range of spectral sensitivity characteristics. The objective of this study is to present our updated endoscopic technology that has successfully integrated two innovative functions; ultrasensitive imaging as well as advanced fluorescent viewing. Two different experiments were conducted. One was carried out to evaluate the function of the ultrahigh-sensitive camera. The other was to test the availability of the newly developed sensor and its performance as a fluorescence endoscope. In both studies, the distance from the endoscopic tip to the target was varied and those endoscopic images in each setting were taken for further comparison. In the first experiment, the 3-CCD camera failed to display the clear images under low illumination, and the target was hardly seen. In contrast, the CMOS camera was able to display the targets regardless of the camera-target distance under low illumination. Under high illumination, imaging quality given by both cameras was quite alike. In the second experiment as a fluorescence endoscope, the CMOS camera was capable of clearly showing the fluorescent-activated organs. The ultrahigh sensitivity CMOS HD endoscopic camera is expected to provide us with clear images under low illumination in addition to the fluorescent images under high illumination in the field of laparoscopic surgery.

Tailored reflectors for illumination.

Science.gov (United States)

Jenkins, D; Winston, R

1996-04-01

We report on tailored reflector design methods that allow the placement of general illumination patterns onto a target plane. The use of a new integral design method based on the edge-ray principle of nonimaging optics gives much more compact reflector shapes by eliminating the need for a gap between the source and the reflector profile. In addition, the reflectivity of the reflector is incorporated as a design parameter. We show the performance of design for constant irradiance on a distant plane, and we show how a leading-edge-ray method may be used to achieve general illumination patterns on nearby targets.

Optimal sun-shading design for enhanced daylight illumination of subtropical classrooms

Energy Technology Data Exchange (ETDEWEB)

Ho, Ming-Chin [Architecture and Building Research Institute, MOI (China); Chiang, Che-Ming [Department of Architecture, National Cheng-Kung University, Tainan 701 (China); Chou, Po-Cheng [Department of Interior Design, Shu-Te University, No. 59 Hun-Shan Road, Yenchau 82445, Kaohsiung County (China); Chang, Kuei-Feng [Department of Real Estate Management, National Pingtung Institute of Commerce (China); Lee, Chia-Yen [Department of Mechanical and Automation Engineering, Da-Yeh University, Changhua 515 (China)

2008-07-01

This study investigates the feasibility of fitting windows with sun-shadings in order to minimize the lighting power costs in daylight-illuminated classrooms lit from a single side in subtropical regions. An IES-CPC model is created of a representative classroom in Taiwan, and a series of simulations is performed to determine the average illuminance value and the uniformity of the illuminance distribution in the classroom under various lighting conditions with no sun-shadings fitted to the window. The numerical results are found to be in good agreement with the experimental measurements obtained using an array of nine-channel photometers. Having confirmed the validity of the simulation scheme, the illumination properties of four different sun-shading designs are considered. The results show that a double-layered sun-shading represents the optimal sun-shading design in terms of achieving a uniform illumination distribution within the classroom. Given appropriate physical dimensions, this daylight access device achieves the minimum illuminance requirement of 500 lx and improves the lighting uniformity ratio from 0.25-0.35 to 0.40-0.42. Furthermore, using this sun-shading device, the required illuminance ratio of 0.5 can be obtained simply by switching on one of the three rows of lights in the classroom. Accordingly, the daylight access device not only improves the illuminance conditions within the classroom, but also reduces the lighting power cost by 71.5% compared to the case where all of the lights are turned on. (author)

The good, the bad, and the ambivalent: A qualitative study of public perceptions towards energy technologies and portfolios in Germany

International Nuclear Information System (INIS)

Scheer, Dirk; Konrad, Wilfried; Wassermann, Sandra

2017-01-01

This paper investigates informed public preferences about electricity technologies and portfolios in Germany, qualitatively analyzing opinions, reasoning patterns and judgments of perceived risks and benefits among lay people. The authors developed and applied a ‘mixed-method’ focus group approach involving 130 participants in 15 focus groups throughout Germany. This research aimed to specify participants’ attitudes and preferences regarding electricity technologies and portfolios (evaluation categories); comparatively assess these preferences (technology/portfolio acceptance profiles); and identify participants’ decision-making strategies and processes (decision rule typology). The evaluation basis of people's preferences comprises nine evaluation categories including, among others, trust, national and household economics, and environmental and health impacts. When assessing preferences regarding electricity technologies and portfolios, two overriding results need to be emphasized: first, that selective evaluation patterns produce unique acceptance profiles, and second, that a shift occurs from heterogeneous towards homogeneous evaluation patterns. In relation to decision rules guiding people's preference-making, the research reveals multiple mechanisms are at work when people express preferences about electricity portfolios. Five decision rules were identified regarding how participants dealt with complex portfolio information processing and preference building. - Highlights: • The evaluation basis of people's preferences comprises nine evaluation categories. • Evaluation patterns produce unique technology and portfolio acceptance profiles. • Five generic decision rules guide people's preference-making. • People make decisions in multiple ways using a variety of evaluation strategies. • No ‘one-size-fits-all’ approach for creating insights into the public's approval or rejection of technologies.

Verification of simple illuminance based measures for indication of discomfort glare from windows

DEFF Research Database (Denmark)

Karlsen, Line Røseth; Heiselberg, Per Kvols; Bryn, Ida

2015-01-01

predictions of discomfort glare from windows already in the early design stage when decisions regarding the façade are taken. This study focus on verifying if simple illuminance based measures like vertical illuminance at eye level or horizontal illuminance at the desk are correlated with the perceived glare...... reported by 44 test subjects in a repeated measure design occupant survey and if the reported glare corresponds with the predictions from the simple Daylight Glare Probability (DGPs) model. Large individual variations were seen in the occupants’ assessment of glare in the present study. Yet, the results...... confirm that there is a statistically significant correlation between both vertical eye illuminance and horizontal illuminance at the desk and the occupants’ perception of glare in a perimeter zone office environment, which is promising evidence towards utilizing such simple measures for indication...

Tolerancing a lens for LED uniform illumination

Science.gov (United States)

Ryu, Jieun; Sasian, Jose

2017-08-01

A method to evaluate tolerance sensitivities for lenses used to produce uniform illumination is presented. Closed form surfaces are used to define optical surfaces and relative illumination is calculated from light etendue considerations.

Cities of light two centuries of urban illumination

CERN Document Server

Isenstadt, Sandy; Neumann, Dietrich

2014-01-01

Cities of Light is the first global overview of modern urban illumination, a development that allows human wakefulness to colonize the night, doubling the hours available for purposeful and industrious activities.　 Urban lighting is undergoing a revolution due to recent developments in lighting technology, and increased focus on sustainability and human-scaled environments. Cities of Light is expansive in coverage, spanning two centuries and touching on developments on six continents, without diluting its central focus on architectural and urban lighting.　 Covering history, geography, theory, and speculation in urban lighting, readers will have numerous points of entry into the book, finding it easy to navigate for a quick reference and or a coherent narrative if read straight through. With chapters written by respected scholars and highly-regarded contemporary practitioners, this book will delight students and practitioners of architectural and urban history, area and cultural studies, and lighting desig...

Open LED Illuminator: A Simple and Inexpensive LED Illuminator for Fast Multicolor Particle Tracking in Neurons

Science.gov (United States)

Bosse, Jens B.; Tanneti, Nikhila S.; Hogue, Ian B.; Enquist, Lynn W.

2015-01-01

Dual-color live cell fluorescence microscopy of fast intracellular trafficking processes, such as axonal transport, requires rapid switching of illumination channels. Typical broad-spectrum sources necessitate the use of mechanical filter switching, which introduces delays between acquisition of different fluorescence channels, impeding the interpretation and quantification of highly dynamic processes. Light Emitting Diodes (LEDs), however, allow modulation of excitation light in microseconds. Here we provide a step-by-step protocol to enable any scientist to build a research-grade LED illuminator for live cell microscopy, even without prior experience with electronics or optics. We quantify and compare components, discuss our design considerations, and demonstrate the performance of our LED illuminator by imaging axonal transport of herpes virus particles with high temporal resolution. PMID:26600461

Open LED Illuminator: A Simple and Inexpensive LED Illuminator for Fast Multicolor Particle Tracking in Neurons.

Directory of Open Access Journals (Sweden)

Jens B Bosse

Full Text Available Dual-color live cell fluorescence microscopy of fast intracellular trafficking processes, such as axonal transport, requires rapid switching of illumination channels. Typical broad-spectrum sources necessitate the use of mechanical filter switching, which introduces delays between acquisition of different fluorescence channels, impeding the interpretation and quantification of highly dynamic processes. Light Emitting Diodes (LEDs, however, allow modulation of excitation light in microseconds. Here we provide a step-by-step protocol to enable any scientist to build a research-grade LED illuminator for live cell microscopy, even without prior experience with electronics or optics. We quantify and compare components, discuss our design considerations, and demonstrate the performance of our LED illuminator by imaging axonal transport of herpes virus particles with high temporal resolution.

A Study On The Influence Of Illuminance Quality To Student’s Performance Of Visual Activities: Case Study Of Architecture Studio Room In Universitas Islam Indonesia

OpenAIRE

Bayuaji, Wisnu Hendrawan; Ayu Iswardhani, Tanty Kesuma; Risky, Alif Angga

2017-01-01

This research aims to measure and evaluate the level of illuminance quality in architecture studio room in relation to the achievement of standard performance and minimum visual comfortableness that should be fulfilled. This study also explores the effect of both illumination quality and quantity to the students physical and psychological performance in conducting visual activities in the architecture studio room. This evaluation will also evaluate the deviation between perception of brightne...

Technology spin-offs generation – a multicase study

Directory of Open Access Journals (Sweden)

Jonas Mendes Constante

2014-05-01

Full Text Available The objective of this study is to understand how small businesses can innovate through the generation of technological spin-offs, identifying motivations, influences and barriers to achieving this phenomenon. Through a qualitative and exploratory study, we analyzed four cases of technological spin-offs in Santa Catarina State. We collected data through field observations, historical data and semi-structured interviews. The main reasons found for spin-offs creation were: diversification and to complement the value chain of the parent company and to ensure greater focus for a specific technology. The main barrier was lack of capital. Government initiatives to support the creation of new businesses, coupled with the organizational culture open to entrepreneurship and investment in R&D, contributed to the development of spin-offs analyzed. This work contributes to the understanding that small and medium-sized technology-based companies are a source of technological spin-offs and can benefit from the occurrence of this process.

Qualitative Case Study Research as Empirical Inquiry

Science.gov (United States)

Ellinger, Andrea D.; McWhorter, Rochell

2016-01-01

This article introduces the concept of qualitative case study research as empirical inquiry. It defines and distinguishes what a case study is, the purposes, intentions, and types of case studies. It then describes how to determine if a qualitative case study is the preferred approach for conducting research. It overviews the essential steps in…

Handling knowledge on osteoporosis - a qualitative study

DEFF Research Database (Denmark)

Nielsen, Dorthe; Huniche, Lotte; Brixen, Kim

2013-01-01

Scand J Caring Sci; 2012 Handling knowledge on osteoporosis - a qualitative study The aim of this qualitative study was to increase understanding of the importance of osteoporosis information and knowledge for patients' ways of handling osteoporosis in their everyday lives. Interviews were...

Technology and the study of wildfire: Middle school students study the impacts of wildfire

Science.gov (United States)

Fox-Gliessman, D.; Kerski, J.J.

2005-01-01

Various technologies that can assist students in exploring the human and environmental impacts of wildfire and in communicating their findings are discussed. Wildfires occur in many parts of the world, and provide an excellent opportunity for students to study local and global interdisciplinary issues using technology. Prior to the beginning of the field study, students take instructions in both their math and science classes about the distinction and appropriate uses of quantitative and qualitative data. Use of computer programs such as Excel spreadsheets which can contain data, and interaction of research and technology group with students, can help them collect best of the information and in making an accurate report.

Nonimaging optical illumination system

Energy Technology Data Exchange (ETDEWEB)

Winston, R.; Ries, H.

2000-02-01

A nonimaging illumination optical device for producing a selected far field illuminance over an angular range. The optical device includes a light source, a light reflecting surface, and a family of light edge rays defined along a reference line with the reflecting surface defined in terms of the reference line 104 as a parametric function R(t) where t is a scalar parameter position and R(t) = k(t) + Du(t) where k(t) is a parameterization of the reference line 104, and D is a distance from a point on the reference line 104 to the reflection surface 108 along the desired edge ray through the point.

Illumination Profile & Dispersion Variation Effects on Radial Velocity Measurements

Science.gov (United States)

Grieves, Nolan; Ge, Jian; Thomas, Neil B.; Ma, Bo; Li, Rui; SDSS-III

2015-01-01

The Multi-object APO Radial-Velocity Exoplanet Large-Area Survey (MARVELS) measures radial velocities using a fiber-fed dispersed fixed-delay interferometer (DFDI) with a moderate dispersion spectrograph. This setup allows a unique insight into the 2D illumination profile from the fiber on to the dispersion grating. Illumination profile investigations show large changes in the profile over time and fiber location. These profile changes are correlated with dispersion changes and long-term radial velocity offsets, a major problem within the MARVELS radial velocity data. Characterizing illumination profiles creates a method to both detect and correct radial velocity offsets, allowing for better planet detection. Here we report our early results from this study including improvement of radial velocity data points from detected giant planet candidates. We also report an illumination profile experiment conducted at the Kitt Peak National Observatory using the EXPERT instrument, which has a DFDI mode similar to MARVELS. Using profile controlling octagonal-shaped fibers, long term offsets over a 3 month time period were reduced from ~50 m/s to within the photon limit of ~4 m/s.

Qualitative research methods: key features and insights gained from use in infection prevention research.

Science.gov (United States)

Forman, Jane; Creswell, John W; Damschroder, Laura; Kowalski, Christine P; Krein, Sarah L

2008-12-01

Infection control professionals and hospital epidemiologists are accustomed to using quantitative research. Although quantitative studies are extremely important in the field of infection control and prevention, often they cannot help us explain why certain factors affect the use of infection control practices and identify the underlying mechanisms through which they do so. Qualitative research methods, which use open-ended techniques, such as interviews, to collect data and nonstatistical techniques to analyze it, provide detailed, diverse insights of individuals, useful quotes that bring a realism to applied research, and information about how different health care settings operate. Qualitative research can illuminate the processes underlying statistical correlations, inform the development of interventions, and show how interventions work to produce observed outcomes. This article describes the key features of qualitative research and the advantages that such features add to existing quantitative research approaches in the study of infection control. We address the goal of qualitative research, the nature of the research process, sampling, data collection and analysis, validity, generalizability of findings, and presentation of findings. Health services researchers are increasingly using qualitative methods to address practical problems by uncovering interacting influences in complex health care environments. Qualitative research methods, applied with expertise and rigor, can contribute important insights to infection prevention efforts.

Converting a conventional wired-halogen illuminated indirect ophthalmoscope to a wireless-light emitting diode illuminated indirect ophthalmoscope in less than 1000/- rupees

Directory of Open Access Journals (Sweden)

Mihir Kothari

2015-01-01

Full Text Available Aim: To report the "do it yourself" method of converting an existing wired-halogen indirect ophthalmoscope (IO to a wireless-light emitting diode (LED IO and report the preferences of the patients and the ophthalmologists. Subjects and Methods: In this prospective observational study, a conventional IO was converted to wireless-LED IO using easily available, affordable electrical components. Conventional and the converted IO were then used to perform photo-stress test and take the feedback of subjects and the ophthalmologists regarding its handling and illumination characteristics. Results: The cost of conversion to wireless-LED was 815/- rupees. Twenty-nine subjects, mean age 34.3 ΁ 10 years with normal eyes were recruited in the study. Between the two illumination systems, there was no statistical difference in the magnitude of the visual acuity loss and the time to recovery of acuity and the bleached vision on photo-stress test, although the visual recovery was clinically faster with LED illumination. The heat sensation was more with halogen illumination than the LED (P = 0.009. The ophthalmologists rated wireless-LED IO higher than wired-halogen IO on the handling, examination comfort, patient′s visual comfort and quality of the image. Twenty-two (81% ophthalmologists wanted to change over to wireless-LED IO. Conclusions: Converting to wireless-LED IO is easy, cost-effective and preferred over a wired-halogen indirect ophthalmoscope.

Converting a conventional wired-halogen illuminated indirect ophthalmoscope to a wireless-light emitting diode illuminated indirect ophthalmoscope in less than 1000/- rupees.

Science.gov (United States)

Kothari, Mihir; Kothari, Kedar; Kadam, Sanjay; Mota, Poonam; Chipade, Snehal

2015-01-01

To report the "do it yourself" method of converting an existing wired-halogen indirect ophthalmoscope (IO) to a wireless-light emitting diode (LED) IO and report the preferences of the patients and the ophthalmologists. In this prospective observational study, a conventional IO was converted to wireless-LED IO using easily available, affordable electrical components. Conventional and the converted IO were then used to perform photo-stress test and take the feedback of subjects and the ophthalmologists regarding its handling and illumination characteristics. The cost of conversion to wireless-LED was 815/- rupees. Twenty-nine subjects, mean age 34.3 [formula in text] 10 years with normal eyes were recruited in the study. Between the two illumination systems, there was no statistical difference in the magnitude of the visual acuity loss and the time to recovery of acuity and the bleached vision on photo-stress test, although the visual recovery was clinically faster with LED illumination. The heat sensation was more with halogen illumination than the LED (P = 0.009). The ophthalmologists rated wireless-LED IO higher than wired-halogen IO on the handling, examination comfort, patient's visual comfort and quality of the image. Twenty-two (81%) ophthalmologists wanted to change over to wireless-LED IO. Converting to wireless-LED IO is easy, cost-effective and preferred over a wired-halogen indirect ophthalmoscope.

Technology in the Rear-View Mirror: How to Better Incorporate the History of Technology into Technology Education

Science.gov (United States)

Hallstrom, Jonas; Gyberg, Per

2011-01-01

The history of technology can play an important role in illuminating the fundamentals of technological change, but it is important that technology teachers, teacher educators, curriculum developers and researchers can be provided with good analytical tools for this purpose. In this article, we propose a model of techno-historical interplay, as a…

Analysis of image plane's Illumination in Image-forming System

International Nuclear Information System (INIS)

Duan Lihua; Zeng Yan'an; Zhang Nanyangsheng; Wang Zhiguo; Yin Shiliang

2011-01-01

In the detection of optical radiation, the detecting accuracy is affected by optic power distribution of the detector's surface to a large extent. In addition, in the image-forming system, the quality of the image is greatly determined by the uniformity of the image's illumination distribution. However, in the practical optical system, affected by the factors such as field of view, false light and off axis and so on, the distribution of the image's illumination tends to be non uniform, so it is necessary to discuss the image plane's illumination in image-forming systems. In order to analyze the characteristics of the image-forming system at a full range, on the basis of photometry, the formulas to calculate the illumination of the imaging plane have been summarized by the numbers. Moreover, the relationship between the horizontal offset of the light source and the illumination of the image has been discussed in detail. After that, the influence of some key factors such as aperture angle, off-axis distance and horizontal offset on illumination of the image has been brought forward. Through numerical simulation, various theoretical curves of those key factors have been given. The results of the numerical simulation show that it is recommended to aggrandize the diameter of the exit pupil to increase the illumination of the image. The angle of view plays a negative role in the illumination distribution of the image, that is, the uniformity of the illumination distribution can be enhanced by compressing the angle of view. Lastly, it is proved that telecentric optical design is an effective way to advance the uniformity of the illumination distribution.

Accommodating multiple illumination sources in an imaging colorimetry environment

Science.gov (United States)

Tobin, Kenneth W., Jr.; Goddard, James S., Jr.; Hunt, Martin A.; Hylton, Kathy W.; Karnowski, Thomas P.; Simpson, Marc L.; Richards, Roger K.; Treece, Dale A.

2000-03-01

Researchers at the Oak Ridge National Laboratory have been developing a method for measuring color quality in textile products using a tri-stimulus color camera system. Initial results of the Imaging Tristimulus Colorimeter (ITC) were reported during 1999. These results showed that the projection onto convex sets (POCS) approach to color estimation could be applied to complex printed patterns on textile products with high accuracy and repeatability. Image-based color sensors used for on-line measurement are not colorimetric by nature and require a non-linear transformation of the component colors based on the spectral properties of the incident illumination, imaging sensor, and the actual textile color. Our earlier work reports these results for a broad-band, smoothly varying D65 standard illuminant. To move the measurement to the on-line environment with continuously manufactured textile webs, the illumination source becomes problematic. The spectral content of these light sources varies substantially from the D65 standard illuminant and can greatly impact the measurement performance of the POCS system. Although absolute color measurements are difficult to make under different illumination, referential measurements to monitor color drift provide a useful indication of product quality. Modifications to the ITC system have been implemented to enable the study of different light sources. These results and the subsequent analysis of relative color measurements will be reported for textile products.

Infrared Illuminated CdZnTe detectors with improved performance

International Nuclear Information System (INIS)

Ivanov, V.; Loutchanski, A.; Dorogov, P.; Khinoverov, S.

2013-06-01

It was found that IR illumination of a properly chosen wavelength and intensity can significantly improve spectrometric characteristics of CdZnTe quasi-hemispherical detectors [1]. Improving of the spectrometric characteristics is due to improvement of uniformity of charge collection by the detector volume. For operation at room temperature the optimal wavelength of IR illumination is about 940 nm, but for operation at lower temperature of -20 deg. C the optimal wavelengths of IR illumination is about 1050 nm. Infrared illumination can be performed using conventional low-power IR LEDs. Application of SMD LEDs allows produce miniature detection probes with IR illuminated CdZnTe detectors. We have fabricated and tested a variety of detection probes with CdZnTe quasi-hemispherical detectors from the smallest with volumes of 1-5 mm 3 to larger with volumes of 1.5 cm 3 and 4.0 cm 3 . The use of IR illumination significantly improves spectrometric characteristics of the probes operating at room temperature, especially probes with detectors of large volumes. The probe with the detector of 4 cm 3 without IR illumination had energy resolution of 24.2 keV at 662 keV and of 12.5 keV with IR illumination. (authors)

Who Do We Think We Are? Disrupting Notions of Quality in Qualitative Research.

Science.gov (United States)

Mitchell, Jennifer; Boettcher-Sheard, Nicholas; Duque, Camille; Lashewicz, Bonnie

2018-03-01

The purpose of this article is to illuminate our troubles with, and troubling of, the trustworthiness dimension of balancing subjectivity and reflexivity, in qualitative research. This article evolved from debriefing sessions between three novice researchers working on a qualitative research study aimed at building understandings of the relational dynamics between adults with developmental disability diagnoses (ADevD) and their caregiving families. Following data collection, coauthors discussed interview experiences they had personally found challenging. These experiences constitute a point of departure for our examination of our researcher positions. We present a delineation of three research tensions, in the form of short "reflexive vignettes," each rooted in concern with possibly contradicting our goals of facilitating and expanding participant autonomy. We follow with recommendations about how, as researchers, our endeavor to understand participants with less conventional communication can be used to reflect and inform navigating difficulties universal to qualitative research.

Illumination Conditions of the Lunar Polar Regions Using LOLA Topography

Science.gov (United States)

Mazarico, E.; Neumann, G. A.; Smith, D. E.; Zuber, M. T.; Torrence, M. H.

2011-01-01

We use high-resolution altimetry data obtained by the Lunar Orbiter Laser Altimeter instrument onboard the Lunar Reconnaissance Orbiter to characterize present illumination conditions in the polar regions of the Moon. Compared to previous studies, both the spatial and temporal extent of the simulations are increased significantly, as well as the coverage (fill ratio) of the topographic maps used, thanks to the 28 Hz firing rate of the five-beam instrument. We determine the horizon elevation in a number of directions based on 240 m-resolution polar digital elevation models reaching down to 75 latitude. The illumination of both polar regions extending to 80 can be calculated for any geometry from those horizon longitudinal profiles. We validated our modeling with recent Lunar Reconnaissance Orbiter Wide-Angle Camera images. We assessed the extent of permanently shadowed regions (PSRs, defined as areas that never receive direct solar illumination), and obtained total areas generally larger than previous studies (12,866 and 16,055 km2, in the north and south respectively). We extended our direct illumination model to account for singly-scattered light, and found that every PSR does receive some amount of scattered light during the year. We conducted simulations over long periods (several 18.6-years lunar precession cycles) with a high temporal resolution (6 h), and identified the most illuminated locations in the vicinity of both poles. Because of the importance of those sites for exploration and engineering considerations, we characterized their illumination more precisely over the near future. Every year, a location near the Shackleton crater rim in the south polar region is sunlit continuously for 240 days, and its longest continuous period in total darkness is about 1.5 days. For some locations small height gains ( 10 m) can dramatically improve their average illumination and reduce the night duration, rendering some of those particularly attractive energy-wise as

"I did a lot of Googling": A qualitative study of exclusive breastfeeding support through social media.

Science.gov (United States)

Alianmoghaddam, Narges; Phibbs, Suzanne; Benn, Cheryl

2018-06-16

Little qualitative research has been done to explore the quality of breastfeeding support through social media in New Zealand. This article aims to explore the influence of social media on exclusive breastfeeding practice. A qualitative study involving face-to-face postpartum interviews with 30 mothers who were recruited from the lower North Island of New Zealand. Each participant was followed via short monthly audio-recorded telephone interviews until giving up exclusive breastfeeding or until six months after the birth. The theories "strength of weak ties" and "landscapes of care" are applied to the thematic analysis of the interview material to illuminate the influence of social media on breastfeeding practices. Qualitative analysis of the interview material identified four themes: 1) Mothers need reliable online infant feeding information; 2) Smartphone apps can be a good option for promoting breastfeeding; 3) Information is accessed through weak ties among breastfeeding mothers on Facebook, and 4) the utility of geographically distant infant feeding support via Skype. Most participants sourced post-partum information and advice to support breastfeeding through the Internet, while those with geographically distant family members accessed emotional and practical breastfeeding support via Skype. Breastfeeding advocates should use social media to promote and support exclusive breast-feeding practice. The influence of social media on breastfeeding points to the relational nature of breastfeeding which is embedded in 'real' world and virtual social networks as well as the cultural, geographic and social contexts of a mother's life. Copyright © 2018 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

Optimal LED-based illumination control via distributed convex optimization

NARCIS (Netherlands)

Aslam, Muhammad; Hermans, R.M.; Pandharipande, A.; Lazar, M.; Boje, Edward; Xia, Xiaohua

2014-01-01

Achieving illumination and energy consumption targets is essential in indoor lighting design. The provision of localized illumination to occupants, and the utilization of natural light and energy-efficient light-emitting diode (LED) luminaires can help meet both objectives. Localized illumination

Real-time Global Illumination by Simulating Photon Mapping

DEFF Research Database (Denmark)

Larsen, Bent Dalgaard

2004-01-01

This thesis introduces a new method for simulating photon mapping in realtime. The method uses a variety of both CPU and GPU based algorithms for speeding up the different elements in global illumination. The idea behind the method is to calculate each illumination element individually in a progr......This thesis introduces a new method for simulating photon mapping in realtime. The method uses a variety of both CPU and GPU based algorithms for speeding up the different elements in global illumination. The idea behind the method is to calculate each illumination element individually...... in a progressive and efficient manner. This has been done by analyzing the photon mapping method and by selecting efficient methods, either CPU based or GPU based, which replaces the original photon mapping algorithms. We have chosen to focus on the indirect illumination and the caustics. In our method we first...... divide the photon map into several photon maps in order to make local updates possible. Then indirect illumination is added using light maps that are selectively updated by using selective photon tracing on the CPU. The final gathering step is calculated by using fragment programs and GPU based...

Philosophy of Technology Assumptions in Educational Technology Leadership

Science.gov (United States)

Webster, Mark David

2017-01-01

A qualitative study using grounded theory methods was conducted to (a) examine what philosophy of technology assumptions are present in the thinking of K-12 technology leaders, (b) investigate how the assumptions may influence technology decision making, and (c) explore whether technological determinist assumptions are present. Subjects involved…

Using lecture capture: a qualitative study of nursing faculty's experience.

Science.gov (United States)

Freed, Patricia E; Bertram, Julie E; McLaughlin, Dorcas E

2014-04-01

As lecture capture technology becomes widely available in schools of nursing, faculty will need to master new technological skills and make decisions about recording their classroom lectures or other activities. This study sought to understand faculty's experience of using a new lecture capture system. This qualitative study used Kruger's systematic approach to explore undergraduate nursing faculty's first-time experience using a lecture capture system purchased by the university. Four focus groups were conducted with a total of fourteen undergraduate faculty using lecture capture for the first-time. The interviews were recorded and transcribed and then analyzed by the researchers. Four themes were identified from the faculty interviews. Two of the themes expressed faculty's concerns about the teaching role, and two themes expressed the faculty's concerns about student learning. Participants experienced stress when learning to use the new lecture capture technology and struggled to resolve it with their own beliefs and teaching values. The impact of lecture capture on student learning, impact on class attendance, and the promotion of a culture of lecturing were revealed as important issues to consider when lecture capture becomes available. © 2013.

Doctors' perspectives on PSA testing illuminate established differences in prostate cancer screening rates between Australia and the UK: a qualitative study

Science.gov (United States)

Pickles, Kristen; Carter, Stacy M; Rychetnik, Lucie; Entwistle, Vikki A

2016-01-01

Objectives To examine how general practitioners (GPs) in the UK and GPs in Australia explain their prostate-specific antigen (PSA) testing practices and to illuminate how these explanations are similar and how they are different. Design A grounded theory study. Setting Primary care practices in Australia and the UK. Participants 69 GPs in Australia (n=40) and the UK (n=29). We included GPs of varying ages, sex, clinical experience and patient populations. All GPs interested in participating in the study were included. Results GPs' accounts revealed fundamental differences in whether and how prostate cancer screening occurred in their practice and in the broader context within which they operate. The history of prostate screening policy, organisational structures and funding models appeared to drive more prostate screening in Australia and less in the UK. In Australia, screening processes and decisions were mostly at the discretion of individual clinicians, and varied considerably, whereas the accounts of UK GPs clearly reflected a consistent, organisationally embedded approach based on local evidence-based recommendations to discourage screening. Conclusions The GP accounts suggested that healthcare systems, including historical and current organisational and funding structures and rules, collectively contribute to how and why clinicians use the PSA test and play a significant role in creating the mindlines that GPs employ in their clinic. Australia's recently released consensus guidelines may support more streamlined and consistent care. However, if GP mindlines and thus routine practice in Australia are to shift, to ultimately reduce unnecessary or harmful prostate screening, it is likely that other important drivers at all levels of the screening process will need to be addressed. PMID:27920082

The Aircraft Electric Taxi System: A Qualitative Multi Case Study

Science.gov (United States)

Johnson, Thomas Frank

The problem this research addresses is the airline industry, and the seemingly unwillingness attitude towards adopting ways to taxi aircraft without utilizing thrust from the main engines. The purpose of the study was to get a better understanding of the decision-making process of airline executives, in respect to investing in cost saving technology. A qualitative research method is used from personal interviews with 24 airline executives from two major U.S. airlines, related industry journal articles, and aircraft performance data. The following three research questions are addressed. RQ1. Does the cost of jet fuel influence airline executives' decision of adopting the aircraft electric taxi system technology? RQ2 Does the measurable payback period for a return on investment influence airline executives' decision of adopting ETS technology? RQ3. Does the amount of government assistance influence airline executives' decision of adopting ETS technology? A multi case research study design is used with a triangulation technique. The participant perceptions indicate the need to reduce operating costs, they have concerns about investment risk, and they are in favor of future government sponsored performance improvement projects. Based on the framework, findings and implications of this study, a future research paper could focus on the positive environmental effects of the ETS application. A study could be conducted on current airport area air quality and the effects that aircraft main engine thrust taxiing has on the surrounding air quality.

Social Interaction Needs and Entertainment Approaches to Pregnancy Well-Being in mHealth Technology Design for Low-Income Transmigrant Women: Qualitative Codesign Study.

Science.gov (United States)

AlJaberi, Hana

2018-04-13

Low-income Caribbean transmigrant women face unique health challenges during pregnancy that set forth multidimensional implications for the design of mobile health (mHealth). Acknowledgment of the unique health needs of low-income Caribbean immigrant women in the United States and what that entails regarding technology design remains rarely examined in the literature of mHealth technologies. The goal of this study was to reveal the needs and gaps in mHealth interventions for pregnant immigrant women not yet realized in this field. These understandings reveal design opportunities for mHealth. The use of the qualitative participatory action research approach of codesign workshops in this study resulted in design solutions by the participants after reflecting on their earlier focus group discussions. The highlights are not the resulting designs per se but rather the inferences derived from the researcher reflecting on these designs. The designs exposed two themes relevant to this paper. First, the participants desired the inclusion and rebuilding of social and organizational relationships in mHealth. The resulting designs formulate an understanding of the women's health-related social support needs and how technology can facilitate them. Second, the participants wanted entertainment with an element of social participation incorporated in mHealth pregnancy management interventions. This brings attention to the role entertainment can add to the impact mHealth can deliver for pregnancy well-being. The study concluded with an examination of social and entertainment design implications that reveal pregnant immigrant women's virtual health-related sharing habits, choice of sharing interaction scenarios during pregnancy (eg, local, long distance, one-way, two-way, and many-many), and choice of sharing media (eg, text, voice, and video). Additionally, the study revealed exclusions to social sharing capabilities in health technologies for these women. ©Hana Al

Nonimaging optical illumination system

Science.gov (United States)

Winston, Roland; Ries, Harald

1996-01-01

A nonimaging illumination optical device for producing a selected far field illuminance over an angular range. The optical device includes a light source 102, a light reflecting surface 108, and a family of light edge rays defined along a reference line 104 with the reflecting surface 108 defined in terms of the reference line 104 as a parametric function R(t) where t is a scalar parameter position and R(t)=k(t)+Du(t) where k(t) is a parameterization of the reference line 104, and D is a distance from a point on the reference line 104 to the reflection surface 108 along the desired edge ray through the point.

Indicators of creativity in a technology class: a case study

African Journals Online (AJOL)

study we investigated how learners demonstrate creativity whilst en- gaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data collection. From this data, indicators of creativity emerged. Schools must encourage learners to be creative ...

Effect of different illumination sources on reading and visual performance

Directory of Open Access Journals (Sweden)

Male Shiva Ram

2018-01-01

Conclusion: This study demonstrates the influence of illumination on reading rate; there were no significant differences between males and females under different illuminations, however, males preferred CFL and females preferred FLUO for faster reading and visual comfort. Interestingly, neither preferred LED or TUNG. Although energy-efficient, visual performance under LED is poor; it is uncomfortable for prolonged reading and causes early symptoms of fatigue.

Color constancy by characterization of illumination chromaticity

Science.gov (United States)

Nikkanen, Jarno T.

2011-05-01

Computational color constancy algorithms play a key role in achieving desired color reproduction in digital cameras. Failure to estimate illumination chromaticity correctly will result in invalid overall colour cast in the image that will be easily detected by human observers. A new algorithm is presented for computational color constancy. Low computational complexity and low memory requirement make the algorithm suitable for resource-limited camera devices, such as consumer digital cameras and camera phones. Operation of the algorithm relies on characterization of the range of possible illumination chromaticities in terms of camera sensor response. The fact that only illumination chromaticity is characterized instead of the full color gamut, for example, increases robustness against variations in sensor characteristics and against failure of diagonal model of illumination change. Multiple databases are used in order to demonstrate the good performance of the algorithm in comparison to the state-of-the-art color constancy algorithms.

Side-emitting high-power LEDs and their application in illumination

Science.gov (United States)

West, Robert S.

2002-11-01

Due to the rapid increase in flux performance from High Power LED's, illumination is an exciting growth market for solid state lighting. Today a white LED is 100+ Lm per device. This is approximately an order of magnitude below the kLm metric used for illumination applications. The radiation pattern from the LED is key in increasing the usable flux resulting in improved systems optical performance. This advancement in radiation pattern will allow new market opportunities, which were not yet feasible. In the future this effect of usable lumens will become more important as the flux per package increases. The radiation pattern of the LEDs can be controlled to optimize performance, appearance, and shape of the secondary optics. This advantage is unique to LEDs and can greatly improve system performance, control, and cosmetic appeal for the application. This paper will review the side emitting lens design, the integrated performance of this technology to secondary optics and how the Luxeon side emitter enables improved performance by creating more useable lumens.

CONSUMPTION AND COMMUNICATION OF LUXURY BRANDS ONLINE – ILLUSTRATING A QUALITATIVE ONLINE CASE STUDY

Directory of Open Access Journals (Sweden)

Anita Radón

2013-06-01

Full Text Available Internet research has grown tremendously over the last decade and we see new and elaborate ways to use the Internet for data generation with increased technological abilities as well as increased Internet usage among companies and consumers. This paper illustrates a qualitative online study within the field of marketing with focus on the consumption and communication of brands. The specific interest is in showing how a particular phenomenon is studied using different Internet research methods and how this has resulted in more thick qualitative descriptions of consumption and communication in an online environment. The paper shows how the aim and context of a study leads to an Internet research approach and how the online study was conducted, the methods that were used, the results it gave and thus also sketches the possibilities and future of Internet research.

Diffraction study of duty-cycle error in ferroelectric quasi-phase-matching gratings with Gaussian beam illumination

Science.gov (United States)

Dwivedi, Prashant Povel; Kumar, Challa Sesha Sai Pavan; Choi, Hee Joo; Cha, Myoungsik

2016-02-01

Random duty-cycle error (RDE) is inherent in the fabrication of ferroelectric quasi-phase-matching (QPM) gratings. Although a small RDE may not affect the nonlinearity of QPM devices, it enhances non-phase-matched parasitic harmonic generations, limiting the device performance in some applications. Recently, we demonstrated a simple method for measuring the RDE in QPM gratings by analyzing the far-field diffraction pattern obtained by uniform illumination (Dwivedi et al. in Opt Express 21:30221-30226, 2013). In the present study, we used a Gaussian beam illumination for the diffraction experiment to measure noise spectra that are less affected by the pedestals of the strong diffraction orders. Our results were compared with our calculations based on a random grating model, demonstrating improved resolution in the RDE estimation.

Comparing young people's experience of technology-delivered v. face-to-face mindfulness and relaxation: two-armed qualitative focus group study.

Science.gov (United States)

Tunney, Conall; Cooney, Patricia; Coyle, David; O'Reilly, Gary

2017-04-01

Background The current popularity of mindfulness-based practices has coincided with the increase in access to mobile technology. This has led to many mindfulness apps and programs becoming available, some specifically for children. However, little is known about the experience of engaging with mindfulness through these mediums. Aims To explore children's experience of mindfulness delivered both face-to-face and through a computer game to highlight any differences or similarities. Method A two-armed qualitative focus groups design was used to explore children's experiences. The first arm offered mindfulness exercises in a traditional face-to-face setting with guided meditations. The second arm offered mindfulness exercises through a computer game avatar. Results Themes of relaxation, engagement, awareness, thinking, practice and directing attention emerged from both arms of focus groups. Subthematic codes highlight key differences as well as similarities in the experience of mindfulness. Conclusions These results indicate that mindfulness delivered via technology can offer a rich experience. © The Royal College of Psychiatrists 2017.

Weld pool visual sensing without external illumination

DEFF Research Database (Denmark)

Liu, Jinchao; Fan, Zhun; Olsen, Soren Ingvor

2011-01-01

Visual sensing in arc welding has become more and more important, but still remains challenging because of the harsh environment with extremely strong illumination from the arc. This paper presents a low-cost camera-based sensor system, without using external Illumination, but nevertheless able...

Optical design applications for enhanced illumination performance

Science.gov (United States)

Gilray, Carl; Lewin, Ian

1995-08-01

Nonimaging optical design techniques have been applied in the illumination industry for many years. Recently however, powerful software has been developed which allows accurate simulation and optimization of illumination devices. Wide experience has been obtained in using such design techniques for practical situations. These include automotive lighting where safety is of greatest importance, commercial lighting systems designed for energy efficiency, and numerous specialized applications. This presentation will discuss the performance requirements of a variety of illumination devices. It will further cover design methodology and present a variety of examples of practical applications for enhanced system performance.

Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents

OpenAIRE

Misje, René

2013-01-01

Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents. This qualitative study explores the usefulness of music technology in music therapeutic practice with youth and adolescents. Four music therapist`s reflections on their use of music technologies and on the possibilities, potential and problems of this use are explored through semi-structured intervi...

A Qualitative Study of African American Women in Engineering Technology Programs in Community Colleges

Science.gov (United States)

Blakley, Jacquelyn

2016-01-01

This study examined the experiences of African American women in engineering technology programs in community colleges. There is a lack of representation of African American women in engineering technology programs throughout higher education, especially in community/technical colleges. There is also lack of representation of African American…

Wide-area SWIR arrays and active illuminators

Science.gov (United States)

MacDougal, Michael; Hood, Andrew; Geske, Jon; Wang, Chad; Renner, Daniel; Follman, David; Heu, Paula

2012-01-01

We describe the factors that go into the component choices for a short wavelength (SWIR) imager, which include the SWIR sensor, the lens, and the illuminator. We have shown the factors for reducing dark current, and shown that we can achieve well below 1.5 nA/cm2 for 15 μm devices at 7°C. We have mated our InGaAs detector arrays to 640x512 readout integrated integrated circuits (ROICs) to make focal plane arrays (FPAs). In addition, we have fabricated high definition 1920x1080 FPAs for wide field of view imaging. The resulting FPAs are capable of imaging photon fluxes with wavelengths between 1 and 1.6 microns at low light levels. The dark current associated with these FPAs is extremely low, exhibiting a mean dark current density of 0.26 nA/cm2 at 0°C. FLIR has also developed a high definition, 1920x1080, 15 um pitch SWIR sensor. In addition, FLIR has developed laser arrays that provide flat illumination in scenes that are normally light-starved. The illuminators have 40% wall-plug efficiency and provide low-speckle illumination, provide artifact-free imagery versus conventional laser illuminators.

Indicators of creativity in a technology class: a case study ...

African Journals Online (AJOL)

Teachers seem to lack the skills and knowledge needed to recognise when creativity is taking place. In this study we investigated how learners demonstrate creativity whilst engaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data ...

The study of LED light source illumination conditions for ideal algae cultivation

Science.gov (United States)

Tsai, Chun-Chin; Huang, Chien-Fu; Chen, Cin-Fu; Yue, Cheng-Feng

2017-02-01

Utilizing LED light source modules with 3 different RGB colors, the illumination effect of different wavelengths had been investigated on the growth curve of the same kind of micro algae. It was found that the best micro algae culturing status came out with long wavelength light such as red light (650 670 nm). Based on the same condition for a period of 3 weeks , the grown micro algae population density ratio represented by Optical Density (O.D.) ratio is 1?0.4?0.7 corresponding to growth with Red, Green, Blue light sources, respectively. Mixing 3 types and 2 types of LEDs with different parameters, the grown micro algae population densities were compared in terms of O.D. Interestingly enough, different light sources resulted in significant discoloration on micro algae growth, appearing yellow, brown, green, etc. Our experiments results showed such discoloration effect is reversible. Based on the same lighting condition, micro algae growth can be also affected by incubator size, nutrition supply, and temperature variation. In recent years, micro algae related technologies have been international wise a hot topic of energy and environmental protection for research and development institutes, and big energy companies among those developed countries. There will be an economically prosperous future. From this study of LED lighting to ideal algae cultivation, it was found that such built system would be capable of optimizing artificial cultivation system, leading to economic benefits for its continuous development. Since global warming causing weather change, accompanying with reducing energy sources and agriculture growth shortage are all threatening human being survival.

Content adaptive illumination for Fourier ptychography.

Science.gov (United States)

Bian, Liheng; Suo, Jinli; Situ, Guohai; Zheng, Guoan; Chen, Feng; Dai, Qionghai

2014-12-01

Fourier ptychography (FP) is a recently reported technique, for large field-of-view and high-resolution imaging. Specifically, FP captures a set of low-resolution images, under angularly varying illuminations, and stitches them together in the Fourier domain. One of FP's main disadvantages is its long capturing process, due to the requisite large number of incident illumination angles. In this Letter, utilizing the sparsity of natural images in the Fourier domain, we propose a highly efficient method, termed adaptive Fourier ptychography (AFP), which applies content adaptive illumination for FP, to capture the most informative parts of the scene's spatial spectrum. We validate the effectiveness and efficiency of the reported framework, with both simulated and real experiments. Results show that the proposed AFP could shorten the acquisition time of conventional FP, by around 30%-60%.

Techno-Nationalism and the Construction of University Technology Transfer

Science.gov (United States)

Sá, Creso; Kretz, Andrew; Sigurdson, Kristjan

2013-01-01

Our historical study of Canada's main research university illuminates the overlooked influence of national identities and interests as forces shaping the institutionalization of technology transfer. Through the use of archival sources we trace the rise and influence of Canadian technological nationalism--a response to Canada's perceived dependency…

A Call for Qualitative Methods in Action: Enlisting Positionality as an Equity Tool

Science.gov (United States)

Relles, Stefani R.

2016-01-01

This article describes how the qualitative research tradition known as "positionality" can be used as a method to support classroom equity. The text describes three ways teachers can use a spoken approach to positionality in their day-to-day practice. Classroom vignettes illuminate how these spoken methods of positionality can address…

Qualitative analysis in reliability and safety studies

International Nuclear Information System (INIS)

Worrell, R.B.; Burdick, G.R.

1976-01-01

The qualitative evaluation of system logic models is described as it pertains to assessing the reliability and safety characteristics of nuclear systems. Qualitative analysis of system logic models, i.e., models couched in an event (Boolean) algebra, is defined, and the advantages inherent in qualitative analysis are explained. Certain qualitative procedures that were developed as a part of fault-tree analysis are presented for illustration. Five fault-tree analysis computer-programs that contain a qualitative procedure for determining minimal cut sets are surveyed. For each program the minimal cut-set algorithm and limitations on its use are described. The recently developed common-cause analysis for studying the effect of common-causes of failure on system behavior is explained. This qualitative procedure does not require altering the fault tree, but does use minimal cut sets from the fault tree as part of its input. The method is applied using two different computer programs. 25 refs

STEM Education Related Dissertation Abstracts: A Bounded Qualitative Meta-study

Science.gov (United States)

Banning, James; Folkestad, James E.

2012-12-01

This article utilizes a bounded qualitative meta-study framework to examine the 101 dissertation abstracts found by searching the ProQuest Dissertation and Theses™ digital database for dissertations abstracts from 1990 through 2010 using the search terms education, science, technology, engineer, and STEM/SMET. Professional search librarians established the search criteria used to establish the database. The overarching research question for this study was: What can we learn from the examination of doctoral dissertations abstracts that focus on the STEM education found from 1990 through 2010? The study's findings provide an overview of doctoral research related to STEM education and the discussion section focuses on quality of abstracts, questions regarding the use of the pipeline metaphor, and location of instructional innovation.

Energy efficient LED layout optimization for near-uniform illumination

Science.gov (United States)

Ali, Ramy E.; Elgala, Hany

2016-09-01

In this paper, we consider the problem of designing energy efficient light emitting diodes (LEDs) layout while satisfying the illumination constraints. Towards this objective, we present a simple approach to the illumination design problem based on the concept of the virtual LED. We formulate a constrained optimization problem for minimizing the power consumption while maintaining a near-uniform illumination throughout the room. By solving the resulting constrained linear program, we obtain the number of required LEDs and the optimal output luminous intensities that achieve the desired illumination constraints.

A student's perspective of managing data collection in a complex qualitative study.

Science.gov (United States)

Dowse, Eileen Mary; van der Riet, Pamela; Keatinge, Diana Rosemary

2014-11-01

To highlight from a doctoral student's perspective some of the unexpected and challenging issues that may arise when collecting data in a complex, qualitative study. Using a qualitative approach to undertaking a PhD requires commitment to the research topic, the acquisition of a variety of research skills and the development of expertise in writing. Despite close research supervision and guidance, the first author of this paper experienced unexpected hurdles when collecting data. This article highlights these hurdles and compares them with similar and dissimilar challenges raised by a social researcher with 30 years' experience (White 2012). The first author's experience of field research during her PhD candidature. Informed by a critical theoretical perspective, a snowballing technique was used to examine issues related to data collection by a doctoral student in a qualitative research study. The first author found the logistics of qualitative data collection, concerns about transparency, role confusion and power differentials with participants, and the effective use of video recording technology, unexpectedly challenging. Many of these issues are highlighted in the literature and/or during research supervision. However, the student researcher remains a novice when entering the field. It is often only on reflection after encountering the hurdle that the student recognises future pre-emptive or alternative methods of data collection. The challenges faced as a doctoral student managing the data collection phase of the study concurred with White's discussion of some of the 'real life challenges that novice researchers might face' (2012). Specific guidance and prudence are needed by research students to know when enough data have been collected for manageable analysis within the limits of candidature. Use of reflexivity and mindfulness practised by the student during this phase assisted the ability to reflect, respond and learn from issues as they arose and aim for a

Laser ablation caused by geometrically constrained illumination and inventive target design

Science.gov (United States)

Inogamov, N. A.; Zhakhovsky, V. V.; Khokhlov, V. A.

2018-01-01

Modern laser technologies use very sophisticated manipulations with (i) a photon cloud forming an irradiation beam and with (ii) disign of a target. E.g. high numerical aperture illumination at very small, diffraction limited conditions is employed for fabrication of the tiny solitary nanoformations on surface of specially prepared thin films deposited onto usually dielectric or semiconductor substrate. In the paper below we list such cases and consider an example with a free standing gold nanofilm modified by tightly focused femtosecond laser pulse.

Qualitative Insights from a Canadian Multiinstitutional Research Study: In Search of Meaningful E-learning

OpenAIRE

Lorraine M. Carter; Vince Salyers; Sue Myers; Carol Hipfner; Caroline Hoffart; Christa MacLean; Kathy White; Theresa Matus; Vivian Forssman; Penelope Barrett

2014-01-01

This paper reports the qualitative findings of a mixed methods research study conducted at three Canadian post-secondary institutions. Called the Meaningful E-learning or MEL project, the study was an exploration of the teaching and learning experiences of faculty and students as well as their perceptions of the benefits and challenges of e-learning. Importantly, e-learning was conceptualized as the integration of pedagogy, instructional technology, and the Internet into teaching ...

Advanced split-illumination electron holography without Fresnel fringes

International Nuclear Information System (INIS)

Tanigaki, Toshiaki; Aizawa, Shinji; Park, Hyun Soon; Matsuda, Tsuyoshi; Harada, Ken; Shindo, Daisuke

2014-01-01

Advanced split-illumination electron holography was developed by employing two biprisms in the illuminating system to split an electron wave into two coherent waves and two biprisms in the imaging system to overlap them. A focused image of an upper condenser-biprism filament was formed on the sample plane, and all other filaments were placed in its shadow. This developed system makes it possible to obtain precise reconstructed object waves without modulations due to Fresnel fringes, in addition to holograms of distant objects from reference waves. - Highlights: • Advanced split-illumination electron holography without Fresnel fringes is developed. • Two biprisms are installed in illuminating system of microscope. • High-precision holographic observations of an area locating far from the sample edge become possible

Advanced split-illumination electron holography without Fresnel fringes

Energy Technology Data Exchange (ETDEWEB)

Tanigaki, Toshiaki, E-mail: tanigaki-toshiaki@riken.jp [Center for Emergent Matter Science (CEMS), RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Aizawa, Shinji; Park, Hyun Soon [Center for Emergent Matter Science (CEMS), RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Matsuda, Tsuyoshi [Japan Science and Technology Agency, Kawaguchi, Saitama 332-0012 (Japan); Harada, Ken [Central Research Laboratory, Hitachi, Ltd., Hatoyama, Saitama 350-0395 (Japan); Shindo, Daisuke [Center for Emergent Matter Science (CEMS), RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan)

2014-02-01

Advanced split-illumination electron holography was developed by employing two biprisms in the illuminating system to split an electron wave into two coherent waves and two biprisms in the imaging system to overlap them. A focused image of an upper condenser-biprism filament was formed on the sample plane, and all other filaments were placed in its shadow. This developed system makes it possible to obtain precise reconstructed object waves without modulations due to Fresnel fringes, in addition to holograms of distant objects from reference waves. - Highlights: • Advanced split-illumination electron holography without Fresnel fringes is developed. • Two biprisms are installed in illuminating system of microscope. • High-precision holographic observations of an area locating far from the sample edge become possible.

Rigour in qualitative case-study research.

Science.gov (United States)

Houghton, Catherine; Casey, Dympna; Shaw, David; Murphy, Kathy

2013-03-01

To provide examples of a qualitative multiple case study to illustrate the specific strategies that can be used to ensure the credibility, dependability, confirmability and transferability of a study. There is increasing recognition of the valuable contribution qualitative research can make to nursing knowledge. However, it is important that the research is conducted in a rigorous manner and that this is demonstrated in the final research report. A multiple case study that explored the role of the clinical skills laboratory in preparing students for the real world of practice. Multiple sources of evidence were collected: semi-structured interviews (n=58), non-participant observations at five sites and documentary sources. Strategies to ensure the rigour of this research were prolonged engagement and persistent observation, triangulation, peer debriefing, member checking, audit trail, reflexivity, and thick descriptions. Practical examples of how these strategies can be implemented are provided to guide researchers interested in conducting rigorous case study research. While the flexible nature of qualitative research should be embraced, strategies to ensure rigour must be in place.

A qualitative, exploratory study of predominantly female parental perceptions of consumer health technology use by their overweight and/or obese female adolescent participating in a fee-based 4-week weight-management intervention.

Science.gov (United States)

Knoblock-Hahn, Amy L; LeRouge, Cynthia M

2014-04-01

Consumer health technologies (CHTs) are a growing part of the continuum of care for self-management of overweight and obesity. Parents positively or negatively influence adolescent weight-management efforts and are especially important throughout continuum of care settings. User-centered design (UCD) applications have been developed to assist primary users, such as adolescents, with their weight management, but less is known about the influence of parents as secondary users across many socio-ecological environments. The purpose of this study was to use the Unified Theory of Acceptance and Use of Technology (UTAUT) to inform the design of a UCD application in a qualitative study that sought to determine parental views on how technology can support previously learned behaviors that require ongoing management and support beyond formal lifestyle interventions. Parents of overweight and obese adolescents (n=14) were interviewed about perceived usefulness and planned user-intent of CHT that was designed for adolescents. UTAUT provided theoretical parental constructs (intention, performance and effort expectancy, and social influence) interactions within several socio-ecological contexts, including the home food environment and restaurant dining experiences. Although generalizations of this qualitative study are limited by a small sample size with predominantly mothers (n=13) of overweight and obese daughters (n=12), the exploratory inquiry using a parent as a secondary consumer user can complement the adoption of applications designed by adolescents. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Diffuse-Illumination Systems for Growing Plants

Science.gov (United States)

May, George; Ryan, Robert

2010-01-01

Agriculture in both terrestrial and space-controlled environments relies heavily on artificial illumination for efficient photosynthesis. Plant-growth illumination systems require high photon flux in the spectral range corresponding with plant photosynthetic active radiation (PAR) (400 700 nm), high spatial uniformity to promote uniform growth, and high energy efficiency to minimize electricity usage. The proposed plant-growth system takes advantage of the highly diffuse reflective surfaces on the interior of a sphere, hemisphere, or other nearly enclosed structure that is coated with highly reflective materials. This type of surface and structure uniformly mixes discrete light sources to produce highly uniform illumination. Multiple reflections from within the domelike structures are exploited to obtain diffuse illumination, which promotes the efficient reuse of photons that have not yet been absorbed by plants. The highly reflective surfaces encourage only the plant tissue (placed inside the sphere or enclosure) to absorb the light. Discrete light sources, such as light emitting diodes (LEDs), are typically used because of their high efficiency, wavelength selection, and electronically dimmable properties. The light sources are arranged to minimize shadowing and to improve uniformity. Different wavelengths of LEDs (typically blue, green, and red) are used for photosynthesis. Wavelengths outside the PAR range can be added for plant diagnostics or for growth regulation

Radial super-resolution in digital holographic microscopy using structured illumination with circular symmetry

Science.gov (United States)

Yin, Yujian; Su, Ping; Ma, Jianshe

2018-01-01

A method to improve the radial resolution using special structured light is proposed in the field of digital holographic microscopy (DHM). A specimen is illuminated with circular symmetrical structured light that makes the spectrum have radial movement, so that high frequency components of the specimen are moved into the passband of the receiver to overcome the diffraction limit. In the DHM imaging system, Computer Generated Hologram (CGH) technology is used to generate the required structured light grating. Then the grating is loaded into a spatial light modulator (SLM) to obtain specific structured illumination. After recording the hologram, digital reconstruction, for the microstructure of a binary optical element that needs to observe radial distribution, the radial resolution of the specimen is improved experimentally compare it with the result of one-dimensional sinusoidal structured light imaging. And a method of designing structured light is presented.

The ethical dimension of nursing care rationing: A thematic synthesis of qualitative studies.

Science.gov (United States)

Vryonides, Stavros; Papastavrou, Evridiki; Charalambous, Andreas; Andreou, Panayiota; Merkouris, Anastasios

2015-12-01

In the face of scarcity, nurses may inevitably delay or omit some nursing interventions and give priority to others. This increases the risk of adverse patient outcomes and threatens safety, quality, and dignity in care. However, it is not clear if there is an ethical element in nursing care rationing and how nurses experience the phenomenon in its ethical perspective. The purpose was to synthesize studies that relate care rationing with the ethical perspectives of nursing, and find the deeper, moral meaning of this phenomenon. A systematic review and thematic synthesis of qualitative studies was used. Searching was based on guidelines suggested by Joana Brigs Institute, while the synthesis has drawn from the methodology described. Primary studies were sought from nine electronic databases and manual searches. The explicitness of reporting was assed using consolidated criteria for reporting qualitative research. Nine studies involving 167 nurse participants were included. Synthesis resulted in 35 preliminary themes, 14 descriptive themes, and four analytical themes (professional challenges and moral dilemmas, dominating considerations, perception of a moral role, and experiences of the ethical effects of rationing). Discussion of relationships between themes revealed a new thematic framework. Every effort has been taken, for the thoroughness in searching and retrieving the primary studies of this synthesis, and in order for them to be treated accurately, fairly and honestly and without intentional misinterpretations of their findings. Within limitations of scarcity, nurses face moral challenges and their decisions may jeopardize professional values, leading to role conflict, feelings of guilt, distress and difficulty in fulfilling a morally acceptable role. However, more research is needed to support certain relationships. Related literature is limited. The few studies found highlighted the essence of justice, equality in care and in values when prioritizing care

Perceptions on use of home telemonitoring in patients with long term conditions - concordance with the Health Information Technology Acceptance Model: a qualitative collective case study.

Science.gov (United States)

Middlemass, Jo B; Vos, Jolien; Siriwardena, A Niroshan

2017-06-26

Health information technology (HIT) may be used to improve care for increasing numbers of older people with long term conditions (LTCs) who make high demands on health and social care services. Despite its potential benefits for reducing disease exacerbations and hospitalisations, HIT home monitoring is not always accepted by patients. Using the Health Information Technology Acceptance Model (HITAM) this qualitative study examined the usefulness of the model for understanding acceptance of HIT in older people (≥60 years) participating in a RCT for older people with Chronic Obstructive Pulmonary Disease (COPD) and associated heart diseases (CHROMED). An instrumental, collective case study design was used with qualitative interviews of patients in the intervention arm of CHROMED. These were conducted at two time points, one shortly after installation of equipment and again at the end of (or withdrawal from) the study. We used Framework Analysis to examine how well the HITAM accounted for the data. Participants included 21 patients aged between 60-99 years and their partners or relatives where applicable. Additional concepts for the HITAM for older people included: concerns regarding health professional access and attachment; heightened illness anxiety and desire to avoid continuation of the 'sick-role'. In the technology zone, HIT self-efficacy was associated with good organisational processes and informal support; while ease of use was connected to equipment design being suitable for older people. HIT perceived usefulness was related to establishing trends in health status, detecting early signs of infection and potential to self-manage. Due to limited feedback to users opportunities to self-manage were reduced. HITAM helped understand the likelihood that older people with LTCs would use HIT, but did not explain how this might result in improved self-management. In order to increase HIT acceptance among older people, equipment design and organisational factors

A Qualitative Study of Technology-Based Training in Organizations that Hire Agriculture and Life Sciences Students

Science.gov (United States)

Bedgood, Leslie; Murphrey, Theresa Pesl; Dooley, Kim E.

2008-01-01

Technological advances have created unlimited opportunities in education. Training and technology have merged to create new methods referred to as technology-based training. The purpose of this study was to identify organizations that hire agriculture and life sciences students for positions involving technology-based training and identify…

Proceedings of the Annual Meeting of the Association for Education in Journalism and Mass Communication (82nd, New Orleans, Louisiana, August 3-8, 1999). Qualitative Studies.

Science.gov (United States)

Association for Education in Journalism and Mass Communication.

The Qualitative Studies section of the Proceedings contains the following 14 papers: "Disabling or Enabling? Reading Bodies, Technologies, and the Borg of Star Trek" (Mia Consalvo); "Inverted Pyramids Versus Hypertexts: A Qualitative Study of Readers' Responses to Competing Narrative Forms" (Robert Huesca, Brenda Dervin, John…

Illuminating Chaucer through Poetry, Manuscript Illuminations, and a Critical Rap Album

Science.gov (United States)

Lynch, Tom Liam

2007-01-01

Drawing connections between Chaucer, Eminem, and social issues, New York City high school teacher Tom Liam Lynch helped students become familiar with "The Canterbury Tales." Students wrote poems of rhymed couplets about today's social and political issues, created illuminated manuscripts, and recorded a rap CD. A book and album were…

Effect of Illumination on Ocular Status Modifications Induced by Short-Term 3D TV Viewing

Directory of Open Access Journals (Sweden)

Yuanyuan Chen

2017-01-01

Full Text Available Objectives. This study aimed to compare changes in ocular status after 3D TV viewing under three modes of illumination and thereby identify optimal illumination for 3D TV viewing. Methods. The following measures of ocular status were assessed: the accommodative response, accommodative microfluctuation, accommodative facility, relative accommodation, gradient accommodative convergence/accommodation (AC/A ratio, phoria, and fusional vergence. The observers watched 3D television for 90 minutes through 3D shutter glasses under three illumination modes: A, complete darkness; B, back illumination (50 lx; and C, front illumination (130 lx. The ocular status of the observers was assessed both before and after the viewing. Results. After 3D TV viewing, the accommodative response and accommodative microfluctuation were significantly changed under illumination Modes A and B. The near positive fusional vergence decreased significantly after the 90-minute 3D viewing session under each illumination mode, and this effect was not significantly different among the three modes. Conclusions. Short-term 3D viewing modified the ocular status of adults. The least amount of such change occurred with front illumination, suggesting that this type of illumination is an appropriate mode for 3D shutter TV viewing.

A Qualitative Study on the Obstacles Preventing the Successful Implementation of Web 2.0 in Corporate Learning

Science.gov (United States)

Estrada, Luis

2012-01-01

The purpose of this study was to identify the obstacles to the adoption of Web 2.0 technologies as part of corporate learning solutions and strategies. The study followed a qualitative inquiry approach. The sample consisted of 20 corporate learning professionals who are members of the American Society for Training and Development (ASTD) social…

IODC 2014 Illumination design problem: the Cinderella Lamp

Science.gov (United States)

Cassarly, William J.

2014-12-01

For the 3rd time, the International Optical Design Conference (IODC) included an Illumination Design contest. This year, the contest involved designing the illuminator to project the 1950 Walt Disney "Cinderella" movie using a box of optical knick-knacks. The goal of the problem was to provide the highest screen lumens with greater than 30% uniformity. There were 12 entries from 3 different countries. Three different commercial optical/illumination design packages were used. The winning solution, provided by Alois Herkommer, provided 371 screen lumens.

Interactive indirect illumination using adaptive multiresolution splatting.

Science.gov (United States)

Nichols, Greg; Wyman, Chris

2010-01-01

Global illumination provides a visual richness not achievable with the direct illumination models used by most interactive applications. To generate global effects, numerous approximations attempt to reduce global illumination costs to levels feasible in interactive contexts. One such approximation, reflective shadow maps, samples a shadow map to identify secondary light sources whose contributions are splatted into eye space. This splatting introduces significant overdraw that is usually reduced by artificially shrinking each splat's radius of influence. This paper introduces a new multiresolution approach for interactively splatting indirect illumination. Instead of reducing GPU fill rate by reducing splat size, we reduce fill rate by rendering splats into a multiresolution buffer. This takes advantage of the low-frequency nature of diffuse and glossy indirect lighting, allowing rendering of indirect contributions at low resolution where lighting changes slowly and at high-resolution near discontinuities. Because this multiresolution rendering occurs on a per-splat basis, we can significantly reduce fill rate without arbitrarily clipping splat contributions below a given threshold-those regions simply are rendered at a coarse resolution.

Wood's lamp illumination (image)

Science.gov (United States)

A Wood's lamp emits ultraviolet light and can be a diagnostic aid in determining if someone has a fungal ... is an infection on the area where the Wood's lamp is illuminating, the area will fluoresce. Normally ...

Light-Emitting Diode-Based Illumination System for In Vitro Photodynamic Therapy

Directory of Open Access Journals (Sweden)

Defu Chen

2012-01-01

Full Text Available The aim of this study is to develop a light-emitting diode- (LED- based illumination system that can be used as an alternative light source for in vitro photodynamic therapy (PDT. This illumination system includes a red LED array composed of 70 LEDs centered at 643 nm, an air-cooling unit, and a specific-designed case. The irradiance as a function of the irradiation distance between the LED array and the sample, the homogeneity and stability of irradiation, and the effect of long-time irradiation on culture medium temperature were characterized. Furthermore, the survival rate of the CNE1 cells that sensitized with 5-aminolevulinic acid after PDT treatment was evaluated to demonstrate the efficiency of the new LED-based illumination system. The obtained results show that the LED-based illumination system is a promising light source for in vitro PDT that performed in standard multiwell plate.

Qualitative Studies in Information Systems

DEFF Research Database (Denmark)

Sarker, Suprateek; Xiao, Xiao; Beaulieu, Tanya

2013-01-01

The authors discuss a review of qualitative papers on information systems (IS) published in various journals between 2001 and 2012. They explain trends related to qualitative research in the chosen journals and the key anatomical components of a qualitative research manuscript, including...

Advanced illumination control algorithm for medical endoscopy applications

Science.gov (United States)

Sousa, Ricardo M.; Wäny, Martin; Santos, Pedro; Morgado-Dias, F.

2015-05-01

CMOS image sensor manufacturer, AWAIBA, is providing the world's smallest digital camera modules to the world market for minimally invasive surgery and one time use endoscopic equipment. Based on the world's smallest digital camera head and the evaluation board provided to it, the aim of this paper is to demonstrate an advanced fast response dynamic control algorithm of the illumination LED source coupled to the camera head, over the LED drivers embedded on the evaluation board. Cost efficient and small size endoscopic camera modules nowadays embed minimal size image sensors capable of not only adjusting gain and exposure time but also LED illumination with adjustable illumination power. The LED illumination power has to be dynamically adjusted while navigating the endoscope over changing illumination conditions of several orders of magnitude within fractions of the second to guarantee a smooth viewing experience. The algorithm is centered on the pixel analysis of selected ROIs enabling it to dynamically adjust the illumination intensity based on the measured pixel saturation level. The control core was developed in VHDL and tested in a laboratory environment over changing light conditions. The obtained results show that it is capable of achieving correction speeds under 1 s while maintaining a static error below 3% relative to the total number of pixels on the image. The result of this work will allow the integration of millimeter sized high brightness LED sources on minimal form factor cameras enabling its use in endoscopic surgical robotic or micro invasive surgery.

Model-Based Illumination Correction for Face Images in Uncontrolled Scenarios

NARCIS (Netherlands)

Boom, B.J.; Spreeuwers, Lieuwe Jan; Veldhuis, Raymond N.J.

2009-01-01

Face Recognition under uncontrolled illumination conditions is partly an unsolved problem. Several illumination correction methods have been proposed, but these are usually tested on illumination conditions created in a laboratory. Our focus is more on uncontrolled conditions. We use the Phong model

Ambient light-based optical biosensing platform with smartphone-embedded illumination sensor.

Science.gov (United States)

Park, Yoo Min; Han, Yong Duk; Chun, Hyeong Jin; Yoon, Hyun C

2017-07-15

We present a hand-held optical biosensing system utilizing a smartphone-embedded illumination sensor that is integrated with immunoblotting assay method. The smartphone-embedded illumination sensor is regarded as an alternative optical receiver that can replaces the conventional optical analysis apparatus because the illumination sensor can respond to the ambient light in a wide range of wavelengths, including visible and infrared. To demonstrate the biosensing applicability of our system employing the enzyme-mediated immunoblotting and accompanying light interference, various types of ambient light conditions including outdoor sunlight and indoor fluorescent were tested. For the immunoblotting assay, the biosensing channel generating insoluble precipitates as an end product of the enzymatic reaction is fabricated and mounted on the illumination sensor of the smartphone. The intensity of penetrating light arrives on the illumination sensor is inversely proportional to the amount of precipitates produced in the channel, and these changes are immediately analyzed and quantified via smartphone software. In this study, urinary C-terminal telopeptide fragment of type II collagen (uCTX-II), a biomarker of osteoarthritis diagnosis, was tested as a model analyte. The developed smartphone-based sensing system efficiently measured uCTX-II in the 0-5ng/mL concentration range with a high sensitivity and accuracy under various light conditions. These assay results show that the illumination sensor-based optical biosensor is suitable for point-of-care testing (POCT). Copyright © 2016 Elsevier B.V. All rights reserved.

Educational Technology Adopters: A Case Study in University of Botswana

Science.gov (United States)

Dintoe, Seitebaleng Susan

2018-01-01

Although University of Botswana implemented national ICT policies and trained the lecturers to use educational technology, there was low-level use of eLearning in teaching and learning. In this regard, qualitative case study approach was used to explore and specifically focus on one aspect of the phenomenon; that is, the University of Botswana as…

A Case Study of Policies and Procedures to Address Cyberbullying at a Technology-Based Middle School

Science.gov (United States)

Tate, Bettina Polite

2017-01-01

This qualitative case study explored the policies and procedures used to effectively address cyberbullying at a technology-based middle school. The purpose of the study was to gain an in-depth understanding of policies and procedures used to address cyberbullying at a technology-based middle school in the southern United States. The study sought…

Microplasma light tiles: thin sheet lamps for general illumination

Energy Technology Data Exchange (ETDEWEB)

Eden, J G; Park, S-J [Laboratory for Optical Physics and Engineering, Department of Electrical and Computer Engineering, University of Illinois, Urbana, IL 61801 (United States); Herring, C M; Bulson, J M [Eden Park Illumination, 903 North Country Fair Drive, Champaign, IL 61821 (United States)

2011-06-08

Flat, thin and lightweight lamps providing spatially uniform and dimmable illumination from active areas as large as 400 cm{sup 2} are being developed for general illumination and specialty applications. Comprising an array of low-temperature, nonequilibrium microplasmas driven by a dielectric barrier structure and operating at pressures of typically 400-700 Torr, these lamps have a packaged thickness <4 mm and yet produce luminance values beyond 26 000 cd m{sup -2} with a luminous efficacy approaching 30 lm W{sup -1}. Third generation lamps, presently in limited production, offer a correlated colour temperature in the 3000-4100 K interval and a colour rendering index of 80. Current lamps employ Xe{sub 2} ({lambda} {approx} 172 nm) as the primary emitter photoexciting a mixture of phosphors, and the pressure dependence of the wavelength-integrated fluorescence from the electronically excited dimer has been investigated with a vacuum ultraviolet spectrometer. In contrast to other promising lighting technologies, the decline in luminous efficacy of microplasma lamps with increasing power delivered to the lamp is small. For a 6 x 6 inch{sup 2} ({approx}225 cm{sup 2}) lamp, efficacy falls <16% when the radiant output (luminance) is raised from 2000 cd m{sup -2} to > 10 000 cd m{sup -2}.

A Qualitative Study from Pakistan

African Journals Online (AJOL)

Nineteen interviews with doctors working at different public and private hospitals in. Islamabad and ... problems due to polypharmacy, overuse of antibiotics ... Study design. A qualitative ..... drug selection, procurement and dispensing he is the ...

An internally illuminated monolith reactor: Pros and cons relative to a slurry reactor

NARCIS (Netherlands)

Carneiro, Joana T.; Carneiro, J.T.; Berger, Rob; Moulijn, Jacob A.; Mul, Guido

2009-01-01

In the present study, kinetic models for the photo-oxidation of cyclohexane in two different photoreactor systems are discussed: a top illumination reactor (TIR) representative of a slurry reactor, and the so-called internally illuminated monolith reactor (IIMR) representing a reactor containing

Qualitative Parameters of Practice during University Studies

Science.gov (United States)

Stasiunaitiene, Egle; Norkute, Odeta

2011-01-01

In this article, relevance of practice during university studies is highlighted, as well as the main stages of its organisation, qualitative parameters, as well as criteria and indicators that validate them are defined. Discussion on the idea that taking into consideration qualitative parameters of organising practice as a component of studies…

Musical Cognition at Birth: A Qualitative Study

Science.gov (United States)

Hefer, Michal; Weintraub, Zalman; Cohen, Veronika

2009-01-01

This paper describes research on newborns' responses to music. Video observation and electroencephalogram (EEG) were collected to see whether newborns' responses to random sounds differed from their responses to music. The data collected were subjected to both qualitative and quantitative analysis. This paper will focus on the qualitative study,…

Rolled-Up Nanotech: Illumination-Controlled Hydrofluoric Acid Etching of AlAs Sacrificial Layers

Directory of Open Access Journals (Sweden)

Costescu Ruxandra

2009-01-01

Full Text Available Abstract The effect of illumination on the hydrofluoric acid etching of AlAs sacrificial layers with systematically varied thicknesses in order to release and roll up InGaAs/GaAs bilayers was studied. For thicknesses of AlAs below 10 nm, there were two etching regimes for the area under illumination: one at low illumination intensities, in which the etching and releasing proceeds as expected and one at higher intensities in which the etching and any releasing are completely suppressed. The “etch suppression” area is well defined by the illumination spot, a feature that can be used to create heterogeneously etched regions with a high degree of control, shown here on patterned samples. Together with the studied self-limitation effect, the technique offers a way to determine the position of rolled-up micro- and nanotubes independently from the predefined lithographic pattern.

Design and simulation of double annular illumination mode for microlithography

Science.gov (United States)

Song, Qiang; Zhu, Jing; Yang, Baoxi; Liu, Lei; Wang, Jun; Huang, Huijie

2013-08-01

Methods of generating various illumination patterns remain as an attractive and important micro-optics research area for the development of resolution enhancement in advanced lithography system. In the current illumination system of lithography machine, off-axis illumination is widely used as an effective approach to enhance the resolution and increase the depth of focus (DOF). This paper proposes a novel illumination mode generation unit, which transform conventional mode to double annular shaped radial polarized (DARP) mode for improving the resolution of micro-lithography. Through LightToolsTM software simulation, double annular shaped mode is obtained from the proposed generation unit. The mathematical expressions of the radius variation of inner and outer rings are deduced. The impacts of conventional and dual concentric annular illumination pattern on critical dimension uniformity were simulated on an isolated line, square hole and corner. Lithography performance was compared between DARP illumination mode and corresponding single annular modes under critical dimension of 45nm. As a result, DARP illumination mode can improve the uniformity of aerial image at 45nm node through pitch varied in 300-500 nm to a certain extent.

An Active Illumination and Appearance (AIA) Model for Face Alignment

DEFF Research Database (Denmark)

Kahraman, Fatih; Gokmen, Muhittin; Darkner, Sune

2007-01-01

Face recognition systems are typically required to work under highly varying illumination conditions. This leads to complex effects imposed on the acquired face image that pertains little to the actual identity. Consequently, illumination normalization is required to reach acceptable recognition...... rates in face recognition systems. In this paper, we propose an approach that integrates the face identity and illumination models under the widely used Active Appearance Model framework as an extension to the texture model in order to obtain illumination-invariant face localization...

Technology in the Montessori Classroom: Teachers' Beliefs and Technology Use

Science.gov (United States)

Jones, Sara J.

2017-01-01

As technology becomes ubiquitous in society, there is increasing momentum to incorporate it into education. Montessori education is not immune to this push for technology integration. This qualitative study investigates four Upper Elementary Montessori teachers' attitudes toward technology and technology integration in a public school setting.…

Multiple Illuminant Colour Estimation via Statistical Inference on Factor Graphs.

Science.gov (United States)

Mutimbu, Lawrence; Robles-Kelly, Antonio

2016-08-31

This paper presents a method to recover a spatially varying illuminant colour estimate from scenes lit by multiple light sources. Starting with the image formation process, we formulate the illuminant recovery problem in a statistically datadriven setting. To do this, we use a factor graph defined across the scale space of the input image. In the graph, we utilise a set of illuminant prototypes computed using a data driven approach. As a result, our method delivers a pixelwise illuminant colour estimate being devoid of libraries or user input. The use of a factor graph also allows for the illuminant estimates to be recovered making use of a maximum a posteriori (MAP) inference process. Moreover, we compute the probability marginals by performing a Delaunay triangulation on our factor graph. We illustrate the utility of our method for pixelwise illuminant colour recovery on widely available datasets and compare against a number of alternatives. We also show sample colour correction results on real-world images.

The Diverse Worlds and Research Practices of Qualitative Software

Directory of Open Access Journals (Sweden)

Nigel Fielding

2012-05-01

Full Text Available The article considers the way that digital research technologies and online environments increasingly support new forms of qualitative research that have emerged as a result of new user groups taking up the practice of social research. New practitioners of qualitative research have entered the field from societies where qualitative research is a newly-established practice, and new cadres of "citizen researchers" have turned to qualitative methods for non-academic purposes. These groups challenge accepted understandings of qualitative methods. The article uses the example of qualitative software as a case study of how qualitative research is enabled by new digital tools that help new user groups extend the application of qualitative research methods. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1202124

Understanding avoidant leadership in health care: findings from a secondary analysis of two qualitative studies.

Science.gov (United States)

Jackson, Debra; Hutchinson, Marie; Peters, Kath; Luck, Lauretta; Saltman, Deborah

2013-04-01

To illuminate ways that avoidant leadership can be enacted in contemporary clinical settings. Avoidance is identified in relation to laissez-faire leadership and passive avoidant leadership. However, the nature and characteristics of avoidance and how it can be enacted in a clinical environment are not detailed. This paper applied secondary analysis to data from two qualitative studies. We have identified three forms of avoidant leader response: placating avoidance, where leaders affirmed concerns but abstained from action; equivocal avoidance, where leaders were ambivalent in their response; and hostile avoidance, where the failure of leaders to address concerns escalated hostility towards the complainant. Through secondary analysis of two existing sets of data, we have shed new light on avoidant leaderships and how it can be enacted in contemporary clinical settings. Further work needs to be undertaken to better understand this leadership style. We recommend that organizations ensure that all nurse leaders are aware of how best to respond to concerns of wrongdoing and that mechanisms are created to ensure timely feedback is provided about the actions taken. © 2012 Blackwell Publishing Ltd.

Combining Illumination Normalization Methods for Better Face Recognition

NARCIS (Netherlands)

Boom, B.J.; Tao, Q.; Spreeuwers, Lieuwe Jan; Veldhuis, Raymond N.J.

2009-01-01

Face Recognition under uncontrolled illumination conditions is partly an unsolved problem. There are two categories of illumination normalization methods. The first category performs a local preprocessing, where they correct a pixel value based on a local neighborhood in the images. The second

Low light illumination study on commercially available homojunction photovoltaic cells

International Nuclear Information System (INIS)

Russo, Johnny; Ray, William; Litz, Marc S.

2017-01-01

Highlights: • COTS PV cells are tested under indoor and narrow light spectra. • InGaP is the most efficient under low light conditions (0.5–100 μW_o_p_t/cm"2). • InGaP is selected for isotope battery. • Optimal incident wavelength (614 nm) for InGaP is identified in model. - Abstract: Low illumination (10"−"4 suns) and indoor light energy harvesting is needed to meet the demands of zero net energy (ZNE) building, Internet of Things (IoT), and beta-photovoltaic energy harvesting systems to power remote sensors. Photovoltaic (PV) solar cells under low intensity and narrow (±40 nm) light spectrum conditions are not well characterized nor developed, especially for commercially available devices and scalable systems. PV operating characteristics under 1 sun illumination decrease at lower light intensity and narrow spectrum conditions (efficiency drops from ∼25% at 100 mW_o_p_t/cm"2 to 2% at 1 μW_o_p_t/cm"2). By choosing a PV with a bandgap that matches the light source operating wavelength, the total system efficiency can be improved. By quantifying losses on homojunction photovoltaics (thermalization and leakage current), we have determined the theoretical optimized efficiency for a set of PV material and a selected set of light sources. We measure single-junction solar cells’ parameters under three different light sources (indoor light and narrow spectrum LED sources) with light intensities ranging from 0.5 to 100 μW_o_p_t/cm"2. Measurements show that indium gallium phosphide (InGaP) PV has the highest surface power density and conversion efficiency (29% under ≈1 μW_o_p_t/cm"2 from a 523 nm central peak LED). A beta-photovoltaic experimental study identifies InGaP to be optimized for use with the ZnS:Cu, Al and tritium at STP. The results have guided the selection of PV material for scalable isotope batteries and other low-light energy harvesting systems.

Three-dimensional illumination procedure for photodynamic therapy of dermatology

Science.gov (United States)

Hu, Xiao-ming; Zhang, Feng-juan; Dong, Fei; Zhou, Ya

2014-09-01

Light dosimetry is an important parameter that affects the efficacy of photodynamic therapy (PDT). However, the irregular morphologies of lesions complicate lesion segmentation and light irradiance adjustment. Therefore, this study developed an illumination demo system comprising a camera, a digital projector, and a computing unit to solve these problems. A three-dimensional model of a lesion was reconstructed using the developed system. Hierarchical segmentation was achieved with the superpixel algorithm. The expected light dosimetry on the targeted lesion was achieved with the proposed illumination procedure. Accurate control and optimization of light delivery can improve the efficacy of PDT.

Rectangular illumination using a secondary optics with cylindrical lens for LED street light.

Science.gov (United States)

Chen, Hsi-Chao; Lin, Jun-Yu; Chiu, Hsuan-Yi

2013-02-11

The illumination pattern of an LED street light is required to have a rectangular distribution at a divergence-angle ratio of 7:3 for economical illumination. Hence, research supplying a secondary optics with two cylindrical lenses was different from free-form curvature for rectangular illumination. The analytical solution for curvatures with different ratio rectangles solved this detail by light tracing and boundary conditions. Similarities between the experiments and the simulation for a single LED and a 9-LED module were analyzed by Normalized Cross Correlation (NCC), and the error rate was studied by the Root Mean Square (RMS). The tolerance of position must be kept under ± 0.2 mm in the x, y and z directions to ensure that the relative illumination is over 99%.

Illumination engineering design with nonimaging optics

CERN Document Server

Koshel, R John

2012-01-01

This book brings together experts in the field who present material on a number of important and growing topics including lighting, displays, solar concentrators. The first chapter provides an overview of the field of nonimagin and illumination optics. Included in this chapter are terminology, units, definitions, and descriptions of the optical components used in illumination systems. The next two chapters provide material within the theoretical domain, including etendue, etendue squeezing, and the skew invariant. The remaining chapters focus on growing applications. This entire field of

The Experience of Prisoners' Parents: A Meta-Synthesis of Qualitative Studies.

Science.gov (United States)

Gueta, Keren

2017-08-19

The parents of prisoners have long drawn the attention of researchers, due to their role in the etiology of criminality as well as the importance of their support of their offspring during and after incarceration. However, although studies have shown that the parents of prisoners experience high levels of distress, burden, and social stigma, research into their experience is only now beginning to emerge. This metasynthesis examined the limited body of qualitative research on the experience of prisoners' parents, as an exploratory step toward advancing the understanding of their experience. Relevant terms were used to systematically search key databases. Ten small-scale studies, which varied in focus, location, and disciplinary orientation, met the inclusion criteria. The synthesis produced four core themes, reflecting findings regarding parents' (primarily mothers') experience of their offspring's incarceration: parenting from a distance; the burden of care; troubled parental identity; and social reaction. Furthermore, the findings suggested a number of possible mediating factors of this experience, such as parents' social capital and their cognitive appraisal of their offspring's criminality. These themes imply a possible experience of "imprisonment by association" among the parents of inmates and illuminate features that may be unique to them. Given the inherent limitations regarding generalizability of a metasynthesis and the heterogeneity of the experiences of the parents represented by the articles reviewed, the findings call for future large-scale quantitative studies to explore the challenges and therapeutic needs of parents of prisoners regarding the themes identified. © 2017 Family Process Institute.

Interactive Dynamic Volume Illumination with Refraction and Caustics.

Science.gov (United States)

Magnus, Jens G; Bruckner, Stefan

2018-01-01

In recent years, significant progress has been made in developing high-quality interactive methods for realistic volume illumination. However, refraction - despite being an important aspect of light propagation in participating media - has so far only received little attention. In this paper, we present a novel approach for refractive volume illumination including caustics capable of interactive frame rates. By interleaving light and viewing ray propagation, our technique avoids memory-intensive storage of illumination information and does not require any precomputation. It is fully dynamic and all parameters such as light position and transfer function can be modified interactively without a performance penalty.

Understanding the implementation and adoption of an information technology intervention to support medicine optimisation in primary care: qualitative study using strong structuration theory.

Science.gov (United States)

Jeffries, Mark; Phipps, Denham; Howard, Rachel L; Avery, Anthony; Rodgers, Sarah; Ashcroft, Darren

2017-05-10

Using strong structuration theory, we aimed to understand the adoption and implementation of an electronic clinical audit and feedback tool to support medicine optimisation for patients in primary care. This is a qualitative study informed by strong structuration theory. The analysis was thematic, using a template approach. An a priori set of thematic codes, based on strong structuration theory, was developed from the literature and applied to the transcripts. The coding template was then modified through successive readings of the data. Clinical commissioning group in the south of England. Four focus groups and five semi-structured interviews were conducted with 18 participants purposively sampled from a range of stakeholder groups (general practitioners, pharmacists, patients and commissioners). Using the system could lead to improved medication safety, but use was determined by broad institutional contexts; by the perceptions, dispositions and skills of users; and by the structures embedded within the technology. These included perceptions of the system as new and requiring technical competence and skill; the adoption of the system for information gathering; and interactions and relationships that involved individual, shared or collective use. The dynamics between these external, internal and technological structures affected the adoption and implementation of the system. Successful implementation of information technology interventions for medicine optimisation will depend on a combination of the infrastructure within primary care, social structures embedded in the technology and the conventions, norms and dispositions of those utilising it. Future interventions, using electronic audit and feedback tools to improve medication safety, should consider the complexity of the social and organisational contexts and how internal and external structures can affect the use of the technology in order to support effective implementation. © Article author(s) (or their

Predicting daylight illuminance on inclined surfaces using sky luminance data

Energy Technology Data Exchange (ETDEWEB)

Li, D.H.W.; Lau, C.C.S.; Lam, J.C. [City University of Hong Kong, Kowloon (China). Dept. of Building and Construction

2005-07-01

Daylight illuminance, particularly on vertical surfaces, plays a major role in determining and evaluating the daylighting performance of a building. In many parts of the world, however, the basic daylight illuminance data for various vertical planes are not always readily available. The usual method to obtain diffuse illuminance on tilted planes would be based on inclined surface models using data from the horizontal measurements. Alternatively, the diffuse illuminance on a sloping plane can be computed by integrating the luminance distribution of the sky 'seen' by the plane. This paper presents an approach to estimate the vertical outdoor illuminance from sky luminance data and solar geometry. Sky luminance data recorded from January 1999 to December 2001 in Hong Kong and generated by two well-known sky luminance models (Kittler and Perez) were used to compute the outdoor illuminance for the four principal vertical planes (N, E, S and W). The performance of this approach was evaluated against data measured in the same period. Statistical analysis indicated that using sky luminance distributions to predict outdoor illuminance can give reasonably good agreement with measured data for all vertical surfaces. The findings provide an accurate alternative to determine the amount of daylight on vertical as well as other inclined surfaces when sky luminance data are available. (author)

A back-illuminated megapixel CMOS image sensor

Science.gov (United States)

Pain, Bedabrata; Cunningham, Thomas; Nikzad, Shouleh; Hoenk, Michael; Jones, Todd; Wrigley, Chris; Hancock, Bruce

2005-01-01

In this paper, we present the test and characterization results for a back-illuminated megapixel CMOS imager. The imager pixel consists of a standard junction photodiode coupled to a three transistor-per-pixel switched source-follower readout [1]. The imager also consists of integrated timing and control and bias generation circuits, and provides analog output. The analog column-scan circuits were implemented in such a way that the imager could be configured to run in off-chip correlated double-sampling (CDS) mode. The imager was originally designed for normal front-illuminated operation, and was fabricated in a commercially available 0.5 pn triple-metal CMOS-imager compatible process. For backside illumination, the imager was thinned by etching away the substrate was etched away in a post-fabrication processing step.

Laser fusion target illumination optimization with consideration of the beam divergence

International Nuclear Information System (INIS)

Grzanna, J.; Schoennagel, H.

1982-09-01

Using a focusing system with a great focal length it is demonstrated that the radiation divergence considerably influences the illumination optimization. If the channel beam is composed of several single beams, there are two optimum illumination variants: the channel beam tangent and the single beam tangent illumination. Further, it is shown that the illumination channel distribution function can vary in the central region without any effect on the illumination uniformity. The deviation at the periphery is more critical. The most homogeneous illumination and favourable energy transfer would be obtained by low radiation divergence and optimum lateral and axial defocusing of the single beam imaging a suitable near-field intensity pattern on the target surface. It is emphasized that the estimation was made without considering the plasma parameters and the dynamic variation in time. (author)

Dynamic Control Based Photovoltaic Illuminating System

Directory of Open Access Journals (Sweden)

Zhang Chengkai

2016-01-01

Full Text Available Smart LED illumination system can use the power from whether the photovoltaic cell or the power grid automatically based on the SOC (State Of Charge of the photovoltaic cell. This paper proposes a feedback control of the photovoltaic cells and a dynamic control strategy for the Energy system. The dynamic control strategy is used to determine the switching state of the photovoltaic cell based on the illumination load in the past one hour and the battery capacity. These controls are manifested by experimental prototype that the control scheme is correct and effective.

Organized technology. Networks and innovation in technical systems

International Nuclear Information System (INIS)

Shrum, W.

1985-01-01

The book is based on a study of radioactive waste and solar cell research. Social network methods are used to illuminate the differences between technologies such as nuclear waste disposal, dominated by the federal government, and potentially profitable technologies such as photovoltaics, where the private sector plays a larger role. The book examines the interaction of government agencies, national laboratories, private firms, universities, regulatory agencies, Congress, and public-interest groups in the technology development process

Spiral wobbling beam illumination uniformity in HIF fuel target implosion

Directory of Open Access Journals (Sweden)

Kawata S.

2013-11-01

Full Text Available A few % wobbling-beam illumination nonuniformity is realized in heavy ion inertial confinement fusion (HIF throughout the heavy ion beam (HIB driver pulse by a newly introduced spiraling beam axis motion in the first two rotations. The wobbling HIB illumination was proposed to realize a uniform implosion in HIF. However, the initial imprint of the wobbling HIBs was a serious problem and introduces a large unacceptable energy deposition nonuniformity. In the wobbling HIBs illumination, the illumination nonuniformity oscillates in time and space. The oscillating-HIB energy deposition may produce a time-dependent implosion acceleration, which reduces the Rayleigh-Taylor (R-T growth [Laser Part. Beams 11, 757 (1993, Nuclear Inst. Methods in Phys. Res. A 606, 152 (2009, Phys. Plasmas 19, 024503 (2012] and the implosion nonuniformity. The wobbling HIBs can be generated in HIB accelerators and the oscillating frequency may be several 100 MHz ∼ 1 GHz [Phys. Rev. Lett. 104, 254801 (2010]. Three-dimensional HIBs illumination computations present that the few % wobbling HIBs illumination nonuniformity oscillates with the same wobbling HIBs frequency.

Adaptive Ambient Illumination Based on Color Harmony Model

Science.gov (United States)

Kikuchi, Ayano; Hirai, Keita; Nakaguchi, Toshiya; Tsumura, Norimichi; Miyake, Yoichi

We investigated the relationship between ambient illumination and psychological effect by applying a modified color harmony model. We verified the proposed model by analyzing correlation between psychological value and modified color harmony score. Experimental results showed the possibility to obtain the best color for illumination using this model.

Qualitative methods for the study of policy diffusion

DEFF Research Database (Denmark)

Starke, Peter

2013-01-01

This article deals with the question whether and how processes of policy diffusion can be examined with qualitative methods. More specifically, how can qualitative methods address the “twin challenge of interdependence,” namely the challenge to identify diffusion, on the one hand, and the challen...... closes with some suggestions for further methodological development in the study of policy diffusion, including the combination of quantitative and qualitative methods.......This article deals with the question whether and how processes of policy diffusion can be examined with qualitative methods. More specifically, how can qualitative methods address the “twin challenge of interdependence,” namely the challenge to identify diffusion, on the one hand, and the challenge...... to discriminate between mechanisms of diffusion, on the other? I argue, first, that there are three distinct qualitative techniques that can be used, namely cross-case analysis (often based on systematic case selection), within-case process tracing, and counterfactual reasoning. I demonstrate how these techniques...

Comparative analysis of face recognition techniques with illumination variation

International Nuclear Information System (INIS)

Jondhale, K C; Waghmare, L M

2010-01-01

Illumination variation is one of the major challenges in the face recognition. To deal with this problem, this paper presents comparative analysis of three different techniques. First, the DCT is employed to compensate for illumination variations in the logarithm domain. Since illumination variation lies mainly in the low frequency band, an appropriate number of DCT coefficients are truncated to reduce the variations under different lighting conditions. The nearest neighbor classifier based on Euclidean distance is employed for classification. Second, the performance of PCA is checked on normalized image. PCA is a technique used to reduce multidimensional data sets to a lower dimension for analysis. Third, LDA based methods gives a satisfactory result under controlled lighting condition. But its performance under large illumination variation is not satisfactory. So, the performance of LDA is checked on normalized image. Experimental results on the Yale B and ORL database show that the proposed approach of application of PCA and LDA on normalized dataset improves the performance significantly for the face images with large illumination variations.

Effect of illumination on photoluminescence properties of porous silicon

International Nuclear Information System (INIS)

Naddaf, M.; Hamadeh, H.

2008-11-01

Porous silicon (PS) layers were formed by photo-electrochemical etching of both p-type and n-type single crystal wafers in HF based solution. During the etching process, the silicon wafer was illuminated by a halogen lamp light guided by an optical fiber through a monochromator or diode lasers at different power density and wavelengths (480,533,580 and 635 nm). The optical and structural properties of the prepared PS samples have been investigated by using temperature dependent photoluminescence (PL) spectroscopy, Fourier Transform Infrared (FTIR) spectroscopy, contact angle (CA) measurements, optical microscope and atomic force microscope (AFM). Beside the strong red-yellow PL band, a blue PL band has been observed only in the PS samples formed under the illumination with low power and short wavelengths (480-580 nm) light. In the near infrared (IR) spectral range, a new PL band at 850 nm was observed in p-type PS samples, which prepared under darkness or illumination with 635 nm of low power light. Temperature dependent PL measurements showed that, in contrast to the main IR PL band at around 1100 nm, the intensity of this new band increases on increasing the temperature. These changes in the PL properties was correlated with the illumination induced-structural and morphological modifications in the PS skeleton. In particular, the FTIR analysis showed that the chemical groups and bonds constituting the PS skeleton, such as, SiH, SiO bonds and silanol SiOH group play key role in deciding the PL emission intensity and blue shift. The study proved that the illumination parameters during the photo-electrochemical etching process can be utilized for tailoring a porous layer with novel optical and structural properties. (Authors)

Effect of illumination on photoluminescence properties of porous silicon

International Nuclear Information System (INIS)

Naddaf, M.; Hamadeh, H.

2009-01-01

Porous silicon (PS) layers were formed by photo-electrochemical etching of both p-type and n-type single crystal wafers in HF based solution. During the etching process, the silicon wafer was illuminated by a halogen lamp light guided by an optical fiber through a monochromator or diode lasers at different power density and wavelengths (480,533,580 and 635 nm). The optical and structural properties of the prepared PS samples have been investigated by using temperature dependent photoluminescence (PL) spectroscopy, Fourier Transform Infrared (FTIR) spectroscopy, contact angle (CA) measurements, optical microscope and atomic force microscope (AFM). Beside the strong red-yellow PL band, a blue PL band has been observed only in the PS samples formed under the illumination with low power and short wavelengths (480-580 nm) light. In the near infrared (IR) spectral range, a new PL band at 850 nm was observed in p-type PS samples, which prepared under darkness or illumination with 635 nm of low power light. Temperature dependent PL measurements showed that, in contrast to the main IR PL band at around 1100 nm, the intensity of this new band increases on increasing the temperature. These changes in the PL properties was correlated with the illumination induced-structural and morphological modifications in the PS skeleton. In particular, the FTIR analysis showed that the chemical groups and bonds constituting the PS skeleton, such as, SiH, SiO bonds and silanol SiOH group play key role in deciding the PL emission intensity and blue shift. The study proved that the illumination parameters during the photo-electrochemical etching process can be utilized for tailoring a porous layer with novel optical and structural properties. (Authors)

[An assembly line lighting survey analysis and its optimal illumination range research].

Science.gov (United States)

Yang, Xin-ning; Xu, Yan; DU, Wei-wei; Cao, Lei; Wang, Sheng; Dong, Xue-mei; Lu, Hou-han; Chen, Song-gen; Cao, Xiao-ou; Zhang, Long-lian; He, Li-hua

2011-06-18

To investigate and analyze present conditions of the assembling line illumination in our country, and to set the recommended values of illuminance standard. Questionnaires and field surveys were used in this investigation. A total of 752 workers from seven factories in textile, shoes and electronics industries were selected for the questionnaire survey and site measurement, and corresponding analyses made with SPSS 13.0 statistic software. Uniformity of illumination, definition in working face, general satisfactory degrees, asthenopia were significantly correlated with each other. Assembly line illuminances for five different visual characteristics were recommended in this paper. The illuminances were 500-1 000-1 500 lx, 300-500-1 000 lx, 200-300-750 lx, 100-300-500 lx, 50-100-200 lx, respectively. Present conditions of the assembling line illumination are less than satisfactory, uniformity of illumination is on the low side, and there is no assembling line illuminance standard for general satisfactory degrees and asthenopia of workers. The related work should be further improved.

Authoritative knowledge, the technological imperative and women's responses to prenatal diagnostic technologies.

Science.gov (United States)

McCoyd, Judith L M

2010-12-01

Theories about authoritative knowledge (AK) and the technological imperative have received varying levels of interest in anthropological, feminist and science and technology studies. Although the anthropological literature abounds with empirical considerations of authoritative knowledge, few have considered both theories through an empirical, inductive lens. Data extracted from an earlier study of 30 women's responses to termination for fetal anomaly are reanalyzed to consider the women's views of, and responses to, prenatal diagnostic technologies (PNDTs). Findings indicate that a small minority embrace the societal portrayal of technology as univalently positive, while the majority have nuanced and ambivalent responses to the use of PNDTs. Further, the interface of authoritative knowledge and the technological imperative suggests that AK derives not only from medical provider status and technology use, but also from the adequacy and trustworthiness of the information. The issue of timing and uncertainty of the information also are interrogated for their impact on women's lives and what that can illuminate about the theories of AK and the technological imperative.

A Scalable and Modular Dome Illumination System for Scientific Microphotography on a Budget.

Directory of Open Access Journals (Sweden)

Ricardo Kawada

Full Text Available A scalable and modular LED illumination dome for microscopic scientific photography is described and illustrated, and methods for constructing such a dome are detailed. Dome illumination for insect specimens has become standard practice across the field of insect systematics, but many dome designs remain expensive and inflexible with respect to new LED technology. Further, a one-size-fits-all dome cannot accommodate the large breadth of insect size encountered in nature, forcing the photographer to adapt, in some cases, to a less than ideal dome design. The dome described here is scalable, as it is based on a isodecahedron, and the template for the dome is available as a downloaded file from the internet that can be printed on any printer, on the photographer's choice of media. As a result, a photographer can afford, using this design, to produce a series of domes of various sizes and materials, and LED ring lights of various sizes and color temperatures, depending on the need.

A Qualitative Study from Pakistan

African Journals Online (AJOL)

Purpose: To explore medical practitioners' perceptions towards irrational malaria treatment practices in Pakistan. Methods: A qualitative study was designed to explore the perceptions of medical practitioners regarding antimalarial prescribing practices in two major cities of Pakistan, namely, Islamabad (national capital) and ...

Registered nurses' and older people's experiences of participation in nutritional care in nursing homes: a descriptive qualitative study.

Science.gov (United States)

Sjögren Forss, Katarina; Nilsson, Jane; Borglin, Gunilla

2018-01-01

The evaluation and treatment of older people's nutritional care is generally viewed as a low priority by nurses. However, given that eating and drinking are fundamental human activities, the support and enhancement of an optimal nutritional status should be regarded as a vital part of nursing. Registered nurses must therefore be viewed as having an important role in assessing and evaluating the nutritional needs of older people as well as the ability to intervene in cases of malnutrition. This study aimed to illuminate the experience of participating in nutritional care from the perspectives of older people and registered nurses. A further aim is to illuminate the latter's experience of nutritional care per se. A qualitative, descriptive design was adopted. Data were collected through semi-structured interviews ( n  = 12) with eight registered nurses and four older persons (mean age 85.7 years) in a city in the southern part of Sweden. The subsequent analysis was conducted by content analysis. The analysis reflected three themes: 'participation in nutritional care equals information', 'nutritional care out of remit and competence' and 'nutritional care more than just choosing a flavour'. They were interpreted to illuminate the experience of participation in nutritional care from the perspective of older people and RNs, and the latter's experience of nutritional care in particular per se. Our findings indicate that a paternalistic attitude in care as well as asymmetry in the nurse-patient relationship are still common characteristics of modern clinical nursing practice for older people. Considering that participation should be central to nursing care, and despite the RN's awareness of the importance of involving the older persons in their nutritional care this was not reflected in reality. Strategies to involve older persons in their nutritional care in a nursing home context need to take into account that for this population participation might not always be

The possible ocular hazards of LED dental illumination applications.

Science.gov (United States)

Stamatacos, Catherine; Harrison, Janet L

2013-01-01

The use of high-intensity illumination via Light-Emitting Diode (LED) headlamps is gaining in popularity with dentists and student dentists. Practitioners are using LED headlamps together with magnifying loupes, overhead LED illumination and fiber-optic dental handpieces for long periods of time. Although most manufacturers of these LED illuminators advertise that their devices emit "white" light, these still consist of two spectral bands--the blue spectral band, with its peak at 445 nm, and the green with its peak at 555 nm. While manufacturers suggest that their devices emit "white" light, spectral components of LED lights from different companies are significantly different. Dental headlamp manufacturers strive to create a white LED, and they advertise that this type of light emitted from their product offers bright white-light illumination. However, the manufacturing of a white LED light is done through selection of a white LED-type based on the peak blue strength in combination with the green peak strength and thus creating a beam-forming optic, which determines the beam quality. Some LED illuminators have a strong blue-light component versus the green-light component. Blue-light is highly energized and is close in the color spectrum to ultraviolet-light. The hazards of retinal damage with the use of high-intensity blue-lights has been well-documented. There is limited research regarding the possible ocular hazards of usage of high-intensity illuminating LED devices. Furthermore, the authors have found little research, standards, or guidelines examining the possible safety issues regarding the unique dental practice setting consisting of the combined use of LED illumination systems. Another unexamined component is the effect of high-intensity light reflective glare and magnification back to the practitioner's eyes due to the use of water during dental procedures. Based on the result of Dr. Janet Harrison's observations of beginning dental students in a

Assessment of a multimedia-based prospective method to support public deliberations on health technology design: participant survey findings and qualitative insights.

Science.gov (United States)

Lehoux, P; Jimenez-Pernett, J; Miller, F A; Williams-Jones, B

2016-10-26

Using a combination of videos and online short stories, we conducted four face-to-face deliberative workshops in Montreal (Quebec, Canada) with members of the public who later joined additional participants in an online forum to discuss the social and ethical implications of prospective technologies. This paper presents the participants' appraisal of our intervention and provides novel qualitative insights into the use of videos and online tools in public deliberations. We applied a mixed-method study design. A self-administered survey contained open- and close-ended items using a 5-level Likert-like scale. Absolute frequencies and proportions for the close-ended items were compiled. Qualitative data included field notes, the transcripts of the workshops and the participants' contributions to the online forum. The qualitative data were used to flesh out the survey data describing the participants' appraisal of: 1) the multimedia components of our intervention; 2) its deliberative face-to-face and online processes; and 3) its perceived effects. Thirty-eight participants contributed to the workshops and 57 to the online forum. A total of 46 participants filled-in the survey, for a response rate of 73 % (46/63). The videos helped 96 % of the participants to understand the fictional technologies and the online scenarios helped 98 % to reflect about the issues raised. Up to 81 % considered the arguments of the other participants to be well thought-out. Nearly all participants felt comfortable sharing their ideas in both the face-to-face (89 %) and online environments (93 %), but 88 % preferred the face-to-face workshop. As a result of the intervention, 85 % reflected more about the pros and cons of technology and 94 % learned more about the way technologies may transform society. This study confirms the methodological feasibility of a deliberative intervention whose originality lies in its use of videos and online scenarios. To increase deliberative depth and foster a

Improved illumination system of laparoscopes using an aspherical lens array.

Science.gov (United States)

Wu, Rengmao; Qin, Yi; Hua, Hong

2016-06-01

The current fiber-based illumination systems of laparoscopes are unable to uniformly illuminate a large enough area in abdomen due to the limited numerical aperture (NA) of the fiber bundle. Most energy is concentrated in a small region at the center of the illumination area. This limitation becomes problematic in laparoscopes which require capturing a wide field of view. In this paper, we propose an aspherical lens array which is used to direct the outgoing rays from the fiber bundle of laparoscope to produce a more uniformly illuminated, substantially larger field coverage than standalone fiber source. An intensity feedback method is developed to design the aspherical lens unit for extended non-Lambertian sources, which is the key to the design of this lens array. By this method, the lens unit is obtained after only one iteration, and the lens array is constructed by Boolean operation. Then, the ray-tracing technique is used to verify the design. Further, the lens array is fabricated and experimental tests are performed. The results clearly show that the well-illuminated area is increased to about 0.107m(2) from 0.02m(2) (about 5x larger than a standard fiber illumination source). More details of the internal organs can be clearly observed under this improved illumination condition, which also reflects the significant improvement in the optical performance of the laparoscope.

Nonuniformity mitigation of beam illumination in heavy ion inertial fusion

International Nuclear Information System (INIS)

Kawata, S; Noguchi, K; Suzuki, T; Kurosaki, T; Barada, D; Ogoyski, A I; Zhang, W; Xie, J; Zhang, H; Dai, D

2014-01-01

In inertial fusion, a target DT fuel should be compressed to typically 1000 times the solid density. The target implosion nonuniformity is introduced by a driver beam’s illumination nonuniformity, for example. The target implosion should be robust against the implosion nonuniformities. In this paper, the requirement for implosion uniformity is first discussed. The implosion non-uniformity should be less than a few percent. The implosion dynamics is also briefly reviewed in heavy ion inertial fusion (HIF). Heavy ions deposit their energy inside the target energy absorber, and the energy deposition layer is rather thick, depending on the ion particle energy. Then nonuniformity mitigation mechanisms of the heavy ion beam (HIB) illumination in HIF are discussed. A density valley appears in the energy absorber, and the large-scale density valley also works as a radiation energy confinement layer, which contributes to a radiation energy smoothing. In HIF, wobbling heavy ion beam illumination was also introduced to realize a uniform implosion. The wobbling HIB axis oscillation is precisely controlled. In the wobbling HIBs’ illumination, the illumination nonuniformity oscillates in time and space on an HIF target. The oscillating-HIB energy deposition may contribute to the reduction of the HIBs’ illumination nonuniformity by its smoothing effect on the HIB illumination nonuniformity and also by a growth mitigation effect on the Rayleigh–Taylor instability. (invited comment)

Lighting design for globally illuminated volume rendering.

Science.gov (United States)

Zhang, Yubo; Ma, Kwan-Liu

2013-12-01

With the evolution of graphics hardware, high quality global illumination becomes available for real-time volume rendering. Compared to local illumination, global illumination can produce realistic shading effects which are closer to real world scenes, and has proven useful for enhancing volume data visualization to enable better depth and shape perception. However, setting up optimal lighting could be a nontrivial task for average users. There were lighting design works for volume visualization but they did not consider global light transportation. In this paper, we present a lighting design method for volume visualization employing global illumination. The resulting system takes into account view and transfer-function dependent content of the volume data to automatically generate an optimized three-point lighting environment. Our method fully exploits the back light which is not used by previous volume visualization systems. By also including global shadow and multiple scattering, our lighting system can effectively enhance the depth and shape perception of volumetric features of interest. In addition, we propose an automatic tone mapping operator which recovers visual details from overexposed areas while maintaining sufficient contrast in the dark areas. We show that our method is effective for visualizing volume datasets with complex structures. The structural information is more clearly and correctly presented under the automatically generated light sources.

Modeling Illumination Conditions on the Moon: Applications to LRO-LAMP

Science.gov (United States)

Byron, B. D.; Mazarico, E. M.; Retherford, K. D.; Mandt, K. E.; Greathouse, T.; Gladstone, R.

2017-12-01

LRO-LAMP is a UV spectrograph which uses illumination from Lyman-α sky glow along with UV light from bright stars to image the dark, permanently shadowed regions (PSRs) of the lunar surface. Accurate modeling of this UV illumination is essential to creating albedo maps of the lunar surface, which can shed light on lunar regolith processes and help to constrain the distribution of water ice in polar PSRs. In this study, the variation in reflected intensity received by the LAMP detector was modeled for South Pole crater Amundsen using the illumination program IllumNG. Amundsen was chosen for study due to the PSR in its Northern side and its highly illuminated equator-facing slopes on the Southern wall. The model works by tracing a ray from each LAMP detector pixel along its boresight until the point where it intersects the lunar surface, and calculating the percentage of the total source flux visible above the horizon. In this study, the three main illumination sources used are the Sun, Interplanetary Lyman-α sky glow, and bright UV starlight in the On Band (130-155 nm) and Off Band (155-190 nm) wavelength ranges. The model also has the capability to calculate incident flux received at the surface, as well as intensity reflected from the surface and received by the LAMP detector along each boresight. The study found a noticeable variation in received intensity between six month stretches for the year of 2010. Over the period of January through July, about 6% more IPM Lyman-α flux was reflected from the surface of Amundsen than for July through December. For stellar flux in the On Band, a 13% difference in flux was reflected between the six month periods. In comparing the monthly intensity maps created by the model with LAMP measured monthly brightness maps, similar crater features are apparent. Though the model brightness is generally higher than the LAMP brightness, after accounting for albedo ( 0.05 for the South Pole region) the values are in closer agreement

Qualitative and Mixed Methods Social Media Research

Directory of Open Access Journals (Sweden)

Chareen L. Snelson

2016-02-01

Full Text Available Social media technologies have attracted substantial attention among many types of users including researchers who have published studies for several years. This article presents an overview of trends in qualitative and mixed methods social media research literature published from 2007 through 2013. A collection of 229 qualitative studies were identified through a systematic literature review process. A subset of 55 of these articles report studies involving a combination of qualitative and quantitative methods. Articles were reviewed, analyzed, and coded through a qualitative content analysis approach. Overall trends are presented with respect to the entire collection of articles followed by an analysis of mixed methods research approaches identified in the subset of 55 studies. The most commonly used research approaches involved collecting data from people through interview, focus group, and survey methodologies. Content analysis was the second most commonly used approach whereby researchers use Facebook posts, Tweets (Twitter posts, YouTube videos, or other social media content as a data source. Many of the studies involving combinations of quantitative and qualitative data followed a design resembling Creswell and Plano Clark’s basic mixed methods typology (e.g., convergent parallel, explanatory sequential, and exploratory sequential.

Computer Vision Utilization for Detection of Green House Tomato under Natural Illumination

Directory of Open Access Journals (Sweden)

H Mohamadi Monavar

2013-02-01

Full Text Available Agricultural sector experiences the application of automated systems since two decades ago. These systems are applied to harvest fruits in agriculture. Computer vision is one of the technologies that are most widely used in food industries and agriculture. In this paper, an automated system based on computer vision for harvesting greenhouse tomatoes is presented. A CCD camera takes images from workspace and tomatoes with over 50 percent ripeness are detected through an image processing algorithm. In this research three color spaces including RGB, HSI and YCbCr and three algorithms including threshold recognition, curvature of the image and red/green ratio were used in order to identify the ripe tomatoes from background under natural illumination. The average error of threshold recognition, red/green ratio and curvature of the image algorithms were 11.82%, 10.03% and 7.95% in HSI, RGB and YCbCr color spaces, respectively. Therefore, the YCbCr color space and curvature of the image algorithm were identified as the most suitable for recognizing fruits under natural illumination condition.

Illumination non-uniformity of spirally wobbling beam in heavy ion fusion

International Nuclear Information System (INIS)

Suzuki, T.; Noguchi, K.; Kurosaki, T.; Barada, D.; Kawata, S.; Ma, Y. Y.; Ogoyski, A.I.

2016-01-01

In inertial confinement fusion, the driver beam illumination non-uniformity leads a degradation of fusion energy output. The illumination non-uniformity allowed is less than a few percent in inertial fusion target implosion. Heavy ion beam (HIB) accelerator provides a capability to oscillate a beam axis with a high frequency. The wobbling beams may provide a new method to reduce or smooth the beam illumination non-uniformity. In this paper the HIBs wobbling illumination scheme was optimized. (paper)

Maximising the value of combining qualitative research and randomised controlled trials in health research: the QUAlitative Research in Trials (QUART) study--a mixed methods study.

Science.gov (United States)

O'Cathain, Alicia; Thomas, Kate J; Drabble, Sarah J; Rudolph, Anne; Goode, Jackie; Hewison, Jenny

2014-06-01

Researchers sometimes undertake qualitative research with randomised controlled trials (RCTs) of health interventions. To systematically explore how qualitative research is being used with trials and identify ways of maximising its value to the trial aim of providing evidence of effectiveness of health interventions. A sequential mixed methods study with four components. (1) Database search of peer-reviewed journals between January 2008 and September 2010 for articles reporting the qualitative research undertaken with specific trials, (2) systematic search of database of registered trials to identify studies combining qualitative research and trials, (3) survey of 200 lead investigators of trials with no apparent qualitative research and (4) semistructured telephone interviews with 18 researchers purposively sampled from the first three methods. Qualitative research was undertaken with at least 12% of trials. A large number of articles reporting qualitative research undertaken with trials (n=296) were published between 2008 and 2010. A total of 28% (82/296) of articles reported qualitative research undertaken at the pre-trial stage and around one-quarter concerned drugs or devices. The articles focused on 22 aspects of the trial within five broad categories. Some focused on more than one aspect of the trial, totalling 356 examples. The qualitative research focused on the intervention being trialled (71%, 254/356), the design and conduct of the trial (15%, 54/356), the outcomes of the trial (1%, 5/356), the measures used in the trial (3%, 10/356), and the health condition in the trial (9%, 33/356). The potential value of the qualitative research to the trial endeavour included improving the external validity of trials and facilitating interpretation of trial findings. This value could be maximised by using qualitative research more at the pre-trial stage and reporting findings with explicit attention to the implications for the trial endeavour. During interviews

Investigating the performance of reconstruction methods used in structured illumination microscopy as a function of the illumination pattern's modulation frequency

Science.gov (United States)

Shabani, H.; Sánchez-Ortiga, E.; Preza, C.

2016-03-01

Surpassing the resolution of optical microscopy defined by the Abbe diffraction limit, while simultaneously achieving optical sectioning, is a challenging problem particularly for live cell imaging of thick samples. Among a few developing techniques, structured illumination microscopy (SIM) addresses this challenge by imposing higher frequency information into the observable frequency band confined by the optical transfer function (OTF) of a conventional microscope either doubling the spatial resolution or filling the missing cone based on the spatial frequency of the pattern when the patterned illumination is two-dimensional. Standard reconstruction methods for SIM decompose the low and high frequency components from the recorded low-resolution images and then combine them to reach a high-resolution image. In contrast, model-based approaches rely on iterative optimization approaches to minimize the error between estimated and forward images. In this paper, we study the performance of both groups of methods by simulating fluorescence microscopy images from different type of objects (ranging from simulated two-point sources to extended objects). These simulations are used to investigate the methods' effectiveness on restoring objects with various types of power spectrum when modulation frequency of the patterned illumination is changing from zero to the incoherent cut-off frequency of the imaging system. Our results show that increasing the amount of imposed information by using a higher modulation frequency of the illumination pattern does not always yield a better restoration performance, which was found to be depended on the underlying object. Results from model-based restoration show performance improvement, quantified by an up to 62% drop in the mean square error compared to standard reconstruction, with increasing modulation frequency. However, we found cases for which results obtained with standard reconstruction methods do not always follow the same trend.

Lunar South Pole Illumination: Review, Reassessment, and Power System Implications

Science.gov (United States)

Fincannon, James

2007-01-01

This paper reviews past analyses and research related to lunar south pole illumination and presents results of independent illumination analyses using an analytical tool and a radar digital elevation model. The analysis tool enables assessment at most locations near the lunar poles for any time and any year. Average illumination fraction, energy storage duration, solar/horizon terrain elevation profiles and illumination fraction profiles are presented for various highly illuminated sites which have been identified for manned or unmanned operations. The format of the data can be used by power system designers to develop mass optimized solar and energy storage systems. Data are presented for the worse case lunar day (a critical power planning bottleneck) as well as three lunar days during lunar south pole winter. The main site under consideration by present lunar mission planners (on the Crater Shackleton rim) is shown to have, for the worse case lunar day, a 0.71 average illumination fraction and 73 to 117 hours required for energy storage (depending on power system type). Linking other sites and including towers at either site are shown to not completely eliminate the need for energy storage.

Giving birth with rape in one's past: a qualitative study.

Science.gov (United States)

Halvorsen, Lotta; Nerum, Hilde; Oian, Pål; Sørlie, Tore

2013-09-01

Rape is one of the most traumatizing violations a woman can be subjected to, and leads to extensive health problems, predominantly psychological ones. A large proportion of women develop a form of posttraumatic stress termed Rape Trauma Syndrome. A previous study by our research group has shown that women with a history of rape far more often had an operative delivery in their first birth and those who gave birth vaginally had second stages twice as long as women with no history of sexual assault. The aim of this study is to examine and illuminate how women previously subjected to rape experience giving birth for the first time and their advice on the kind of birth care they regard as good for women with a history of rape. A semi-structured interview with 10 women, who had been exposed to rape before their first childbirth. Data on the birth experience were analyzed by qualitative content analysis. The main theme was "being back in the rape" with two categories: "reactivation of the rape during labor," with subcategories "struggle," "surrender," and "escape" and "re-traumatization after birth," with the subcategories "objectified," "dirtied," and "alienated body." A rape trauma can be reactivated during the first childbirth regardless of mode of delivery. After birth, the women found themselves re-traumatized with the feeling of being dirtied, alienated, and reduced to just a body that another body is to come out of. Birth attendants should acknowledge that the common measures and procedures used during normal birth or cesarean section can contribute to a reactivation of the rape trauma. © 2013, Copyright the Authors Journal compilation © 2013, Wiley Periodicals, Inc.

Application of a Compact High-Definition Exoscope for Illumination and Magnification in High-Precision Surgical Procedures.

Science.gov (United States)

Krishnan, Kartik G; Schöller, Karsten; Uhl, Eberhard

2017-01-01

The basic necessities for surgical procedures are illumination, exposure, and magnification. These have undergone transformation in par with technology. One of the recent developments is the compact magnifying exoscope system. In this report, we describe the application of this system for surgical operations and discuss its advantages and pitfalls. We used the ViTOM exoscope mounted on the mechanical holding arm. The following surgical procedures were conducted: lumbar and cervical spinal canal decompression (n = 5); laminotomy and removal of lumbar migrated disk herniations (n = 4); anterior cervical diskectomy and fusion (n = 1); removal of intraneural schwannomas (n = 2); removal of an acute cerebellar hemorrhage (n = 1); removal of a parafalcine atypical cerebral hematoma caused by a dural arteriovenous fistula (n = 1); and microsutures and anastomoses of a nerve (n = 1), an artery (n = 1), and veins (n = 2). The exoscope offered excellent, magnified, and brilliantly illuminated high-definition images of the surgical field. All surgical operations were successfully completed. The main disadvantage was the adjustment and refocusing using the mechanical holding arm. The time required for the surgical operation under the exoscope was slightly longer than the times required for a similar procedure performed using an operating microscope. The magnifying exoscope is an effective and nonbulky tool for surgical procedures. In visualization around the corners, the exoscope has better potential than a microscope. With technical and technologic modifications, the exoscope might become the next generation in illumination, visualization, exposure, and magnification for high-precision surgical procedures. Copyright © 2016 Elsevier Inc. All rights reserved.

Laser sources for object illumination

Energy Technology Data Exchange (ETDEWEB)

Albrecht, G.F. [Lawrence Livermore National Lab., CA (United States)

1994-11-15

The considerations which formulate the specifications for a laser illuminator are explained, using the example of an underwater object. Depending on the parameters which define the scenario, widely varying laser requirements result.

Improving Shadow Suppression for Illumination Robust Face Recognition

KAUST Repository

Zhang, Wuming

2017-10-13

2D face analysis techniques, such as face landmarking, face recognition and face verification, are reasonably dependent on illumination conditions which are usually uncontrolled and unpredictable in the real world. An illumination robust preprocessing method thus remains a significant challenge in reliable face analysis. In this paper we propose a novel approach for improving lighting normalization through building the underlying reflectance model which characterizes interactions between skin surface, lighting source and camera sensor, and elaborates the formation of face color appearance. Specifically, the proposed illumination processing pipeline enables the generation of Chromaticity Intrinsic Image (CII) in a log chromaticity space which is robust to illumination variations. Moreover, as an advantage over most prevailing methods, a photo-realistic color face image is subsequently reconstructed which eliminates a wide variety of shadows whilst retaining the color information and identity details. Experimental results under different scenarios and using various face databases show the effectiveness of the proposed approach to deal with lighting variations, including both soft and hard shadows, in face recognition.

Difference in opalescence of restorative materials by the illuminant.

Science.gov (United States)

Yu, Bin; Lee, Yong-Keun

2009-08-01

To determine the differences in the opalescence parameter (OP) of indirect and direct resin composites, veneer ceramics and bovine enamel relative to the CIE standard illuminants D65, A and F2. BelleGlass NG (indirect resin; 10 shades) and Estelite Sigma (direct resin; 12 shades), and 4 shades of veneer ceramics were investigated. Bovine enamel was used as a reference. Reflected and transmitted colors of specimens were measured relative to the illuminants D65, A and F2 with a reflection spectrophotometer. OP values relative to the three illuminants [OP(D65), OP(A) and OP(F2)], difference in OP (DeltaOP) and OP difference ratio relative to OP(D65) [DeltaOP/OP(D65)] by the change of illuminants were calculated. Within each restorative material, DeltaOP and DeltaOP/OP(D65) values were analyzed with two-way analysis of variance (ANOVA), with the fixed factors of the shade designation and the combination of illuminants (alpha=0.05). DeltaOP and DeltaOP/OP(D65) values were influenced by the two factors within each restorative material based on two-way ANOVA. High opalescent materials showed higher DeltaOP values. OP(D65) was lower than OP(F2) and OP(A) values. Restorative materials showed lower DeltaOP/OP(D65) values than bovine enamel. Correlation coefficients between OP values relative to different illuminants were higher than 0.961 (Popalescence properties as compared with natural tooth enamel.

Scenario development, qualitative causal analysis and system dynamics

Directory of Open Access Journals (Sweden)

Michael H. Ruge

2009-02-01

Full Text Available The aim of this article is to demonstrate that technology assessments can be supported by methods such as scenario modeling and qualitative causal analysis. At Siemens, these techniques are used to develop preliminary purely qualitative models. These or parts of these comprehensive models may be extended to system dynamics models. While it is currently not possible to automatically generate a system dynamics models (or vice versa, obtain a qualitative simulation model from a system dynamics model, the two thechniques scenario development and qualitative causal analysis provide valuable indications on how to proceed towards a system dynamics model. For the qualitative analysis phase, the Siemens – proprietary prototype Computer – Aided Technology Assessment Software (CATS supportes complete cycle and submodel analysis. Keywords: Health care, telecommucations, qualitative model, sensitivity analysis, system dynamics.

Improvement of illumination uniformity for LED flat panel light by using micro-secondary lens array.

Science.gov (United States)

Lee, Hsiao-Wen; Lin, Bor-Shyh

2012-11-05

LED flat panel light is an innovative lighting product in recent years. However, current flat panel light products still contain some drawbacks, such as narrow lighting areas and hot spots. In this study, a micro-secondary lens array technique was proposed and applied for the design of the light guide surface to improve the illumination uniformity. By using the micro-secondary lens array, the candela distribution of the LED flat panel light can be adjusted to similar to batwing distribution to improve the illumination uniformity. The experimental results show that the enhancement of the floor illumination uniformity is about 61%, and that of the wall illumination uniformity is about 20.5%.

Prescribing of Electronic Activity Monitors in Cardiometabolic Diseases: Qualitative Interview-Based Study.

Science.gov (United States)

Bellicha, Alice; Macé, Sandrine; Oppert, Jean-Michel

2017-09-23

The prevalence of noncommunicable diseases, including those such as type 2 diabetes, obesity, dyslipidemia, and hypertension, so-called cardiometabolic diseases, is high and is increasing worldwide. Strong evidence supports the role of physical activity in management of these diseases. There is general consensus that mHealth technology, including electronic activity monitors, can potentially increase physical activity in patients, but their use in clinical settings remains limited. Practitioners' requirements when prescribing electronic activity monitors have been poorly described. The aims of this qualitative study were (1) to explore how specialist physicians prescribe electronic activity monitors to patients presenting with cardiometabolic conditions, and (2) to better understand their motivation for and barriers to prescribing such monitors. We conducted qualitative semistructured interviews in March to May 2016 with 11 senior physicians from a public university hospital in France with expertise in management of cardiometabolic diseases (type 1 and type 2 diabetes, obesity, hypertension, and dyslipidemia). Interviews lasted 45 to 60 minutes and were audiotaped, transcribed verbatim, and analyzed using directed content analysis. We report our findings following the Consolidated Criteria for Reporting Qualitative Research (COREQ) checklist. Most physicians we interviewed had never prescribed electronic activity monitors, whereas they frequently prescribed blood glucose or blood pressure self-monitoring devices. Reasons for nonprescription included lack of interest in the data collected, lack of evidence for data accuracy, concern about work overload possibly resulting from automatic data transfer, and risk of patients becoming addicted to data. Physicians expected future marketing of easy-to-use monitors that will accurately measure physical activity duration and intensity and provide understandable motivating feedback. Features of electronic activity monitors

Macular photostress and visual experience between microscope and intracameral illumination during cataract surgery.

Science.gov (United States)

Seo, Hyejin; Nam, Dong Heun; Lee, Jong Yeon; Park, Su Jin; Kim, Yu Jeong; Kim, Seong-Woo; Chung, Tae-Young; Inoue, Makoto; Kim, Terry

2018-02-01

To evaluate macular photostress and visual experience between coaxial microscope illumination versus oblique intracameral illumination during cataract surgery. Gachon University Gil Hospital, Incheon, South Korea. Prospective case series. Consecutive patients who had cataract surgery using microscope illumination and intracameral illumination were included. The patients were asked to complete a questionnaire (seeing strong lights, feeling photophobia, feeling startled (fright) when seeing lights, seeing any colors, seeing any instruments or surgical procedures, and estimating intraoperative visual function) designed to describe their cataract surgery experience. The images projected on the retina of the model eye (rear view) with artificial opaque fragments in the anterior chamber during simulating cataract surgery were compared between the 2 illumination types. Sixty patients completed the questionnaire. Scores for strong lights, photophobia, fright, and color perception were significantly higher with microscope illumination than with intracameral illumination (all P microscope illumination (13 [21.7%]). In the rear-view images created in a model eye, only the bright microscope light in the center was seen without any lens image in the microscope illumination. However, in the intracameral illumination, the less bright light from the light pipe in the periphery and the lens fragments were seen more clearly. In a view of the patients' visual experience, oblique intracameral illumination caused less subjective photostress and was preferred over coaxial microscope illumination. Objective findings from the model-eye experiment correlated to the result of visual experience. Copyright © 2018 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Fluorescence digital photography of acne using a light-emitting diode illuminator.

Science.gov (United States)

Ahn, Hyo Hyun; Kim, Soo Nam; Kye, Young Chul

2006-11-01

The fluorescence findings of several dermatological diseases, such as erythrasma, tinea versicolor, and acne are helpful for diagnosis and follow-up. However, many experience difficulty taking photographic images of fluorescence. The aim of this study was to develop a 405 nm light-emitting diode (LED) system for fluorescence digital photography of acne and to determine whether such a diode can be used to evaluate acne. Eight healthy acne patients were compared with controls by fluorescence digital photography using a digital camera equipped with a 405 nm LED illuminator. Digital photographs were taken by two different ways of exposure, i.e. appropriate exposure level and longer exposure. One side of the nose, cheek, and glabella was compared. The numbers and extents of fluorescence dots were counted and measured. As normal controls, seven individuals with apparent oiliness and no acne were enrolled. Red fluorescent facial dots were observed and photographed digitally using the 405 nm LED illuminator. These were more numerous and extensive on the glabella and cheeks of acne patients. Fluorescence digital photography of acne was successfully performed using a 405 nm LED illuminator. This illuminator could be used for acne evaluations.

What's special about human technology?

OpenAIRE

Robert Aunger

2010-01-01

Human technology is difficult to understand because it is so complex. However, human technology evolved from the simpler technologies of other species. Comparison with these other technologies should illuminate why human technology is distinct. Some birds and primates make tools, or simple technological objects whose function is closely related to their form. Humans, on the other hand, make machines--relatively complex objects whose functionality derives from the interaction of parts with res...

Teaching With(out) Technology: Secondary English Teachers and Classroom Technology Use

Science.gov (United States)

Flanagan, Sara; Shoffner, Melanie

2013-01-01

Technology plays an integral role in the English Language Arts (ELA) classroom today, yet teachers and teacher educators continue to develop understandings of how technology influences pedagogy. This qualitative study explored how and why two ELA teachers used different technologies in the secondary English classroom to plan for and deliver…

A study on the operator performance to the drastic change of illumination of MCR in NPP

International Nuclear Information System (INIS)

Shin, Kwang Hyeon; Lee, Yong Hee

2012-01-01

Lighting has been an essential material at a nuclear power plant, which is very much need for working process of a worker. Intensity illumination, brightness, contrast and glare are all found to have a direct influence on visual working process and, designing and managing of such factors are considered important. As long as it satisfies the minimum visual requirements, lighting would directly affect changes of a worker's moves by about 1∼3%. However, for factors with indirect influences are psychological and biological states of an individual worker and, these have been playing a significant role in deciding moves of the worker. For this reason, control of a proper lighting environment is definitely an important part in designing and managing of a nuclear power plant. In this study, how to respond to visual problems of an operator in a main control room of a nuclear power plant in emergency as well as human error causing dangers was investigated while experimentations on changes of visual working performances were carried out which would occur by a sharp change of intensity illumination

Experimental analysis and modeling of the IV characteristics of photovoltaic solar cells under solar spectrum spot illumination

Energy Technology Data Exchange (ETDEWEB)

Munji, M.K., E-mail: mathew.munji@nmmu.ac.z [Department of Physics, Nelson Mandela Metropolitan University, PO Box 7700 Port Elizabeth 6031 (South Africa); Dyk, E.E. van; Vorster, F.J. [Department of Physics, Nelson Mandela Metropolitan University, PO Box 7700 Port Elizabeth 6031 (South Africa)

2009-12-01

In this paper, some models that have been put forward to explain the characteristics of a photovoltaic solar cell device under solar spot-illumination are investigated. In the experimental procedure, small areas of the cell were selected and illuminated at different solar intensities. The solar cell open circuit voltage (V{sub oc}) and short circuit current (I{sub sc}) obtained at different illumination intensities was used to determine the solar cell ideality factor. By varying the illuminated area on the solar cell, changes in the ideality factor were studied. The ideality factor obtained increases with decreasing illumination surface ratio. The photo-generated current at the illuminated part of the cell is assumed to act as a dc source that injects charge carriers into the p-n junction of the whole solar cell while the dark region of the solar cell operates in a low space charge recombination regime with small diffusion currents. From this analysis, a different model of a spot illuminated cell that uses the variation of ideality factor with the illuminated area is proposed.

Experimental analysis and modeling of the IV characteristics of photovoltaic solar cells under solar spectrum spot illumination

International Nuclear Information System (INIS)

Munji, M.K.; Dyk, E.E. van; Vorster, F.J.

2009-01-01

In this paper, some models that have been put forward to explain the characteristics of a photovoltaic solar cell device under solar spot-illumination are investigated. In the experimental procedure, small areas of the cell were selected and illuminated at different solar intensities. The solar cell open circuit voltage (V oc ) and short circuit current (I sc ) obtained at different illumination intensities was used to determine the solar cell ideality factor. By varying the illuminated area on the solar cell, changes in the ideality factor were studied. The ideality factor obtained increases with decreasing illumination surface ratio. The photo-generated current at the illuminated part of the cell is assumed to act as a dc source that injects charge carriers into the p-n junction of the whole solar cell while the dark region of the solar cell operates in a low space charge recombination regime with small diffusion currents. From this analysis, a different model of a spot illuminated cell that uses the variation of ideality factor with the illuminated area is proposed.

Illuminance Level in the Urban Fabric and in the Room

DEFF Research Database (Denmark)

Iversen, Anne; Nielsen, Toke Rammer; Svendsen, Svend

2011-01-01

The decisions made on the urban planning level could influence the building design at later stages. Many studies have shown that the utilisation of daylight in buildings would result in significant savings in electricity consumption for lighting, while creating a higher quality indoor environment...... of the exterior illuminance levels on fac¸ades with the interior illuminance levels on the working plane. The paper also explains an easy to use tool (EvUrbanplan) developed by the authors, which was applied to their findings in the early stages of urban planning to ensure daylight optimisation in the buildings....

[Requirements for and expectations of health technology assessment in Galicia (Spain). A qualitative study from the perspective of decision-makers and clinicians].

Science.gov (United States)

Varela-Lema, Leonor; Merino, Gerardo Atienza; García, Marisa López; Martínez, María Vidal; Triana, Elena Gervas; Mota, Teresa Cerdá

2011-01-01

To explore perceptions of the use of health technology assessment (HTA) in the Galician public health system, identify opinions on the usefulness of the products and services developed by the Galician Health Technology Assessment Agency (avalia-t), and determine the barriers and facilitators to the transfer of results to clinical practice. We performed a qualitative study based on in-depth semi-structured interviews of 20 intentionally selected experts (10 health care professionals and 10 hospital decision makers). The interviews were tape recorded and transcribed for inductive thematic analysis. Interest in HTA activities was high, but most informants considered these activities to be underused as a tool to aid decision making in clinical practice. A series of key factors was identified to guarantee HTA use: greater dissemination of HTA activities and availability of the results, increased involvement and communication among health care professionals in the selection and prioritization of relevant research, contextualization and adaptation of results to the local context, increased organizational support and greater financial resources. The present study allows end-userś opinions on the utility of the various products/services offered by HTA agencies to be contrasted in order to adapt HTA activity to their needs and requirements. The involvement of health care professionals in all HTA fields is perceived as one of the main lines of action for HTA agencies. Such involvement could be achieved by reinforcing personal contact and increasing feedback to collaborators. Copyright © 2010 SESPAS. Published by Elsevier Espana. All rights reserved.

Combining Qualitative and Quantitative Methodologies to Study the Effects of an Academic Boycott on Academics in South Africa.

Science.gov (United States)

Haricombe, Lorraine J.

1993-01-01

Describes a study that used quantitative data from a mailed survey and qualitative data produced from focused interviews to explore what effects an academic boycott had on faculty members at South African universities. Differences in the effects of the boycott in science and technology, humanities, and social science are examined. (Contains 15…

A biologically inspired scale-space for illumination invariant feature detection

International Nuclear Information System (INIS)

Vonikakis, Vasillios; Chrysostomou, Dimitrios; Kouskouridas, Rigas; Gasteratos, Antonios

2013-01-01

This paper presents a new illumination invariant operator, combining the nonlinear characteristics of biological center-surround cells with the classic difference of Gaussians operator. It specifically targets the underexposed image regions, exhibiting increased sensitivity to low contrast, while not affecting performance in the correctly exposed ones. The proposed operator can be used to create a scale-space, which in turn can be a part of a SIFT-based detector module. The main advantage of this illumination invariant scale-space is that, using just one global threshold, keypoints can be detected in both dark and bright image regions. In order to evaluate the degree of illumination invariance that the proposed, as well as other, existing, operators exhibit, a new benchmark dataset is introduced. It features a greater variety of imaging conditions, compared to existing databases, containing real scenes under various degrees and combinations of uniform and non-uniform illumination. Experimental results show that the proposed detector extracts a greater number of features, with a high level of repeatability, compared to other approaches, for both uniform and non-uniform illumination. This, along with its simple implementation, renders the proposed feature detector particularly appropriate for outdoor vision systems, working in environments under uncontrolled illumination conditions. (paper)

Applications of 'edge-on' illuminated porous plate detectors for diagnostic X-ray imaging

CERN Document Server

Shikhaliev, P M

2002-01-01

Scanning X-ray imaging systems for non-invasive diagnostics have several advantages over conventional imaging systems using area detectors. They significantly reduce the detected scatter radiation, cover large areas and potentially provide high spatial resolution. Applications of one-dimensional gaseous detectors and 'edge-on' illuminated silicon strip detectors for scanning imaging systems are currently under intensive investigation. The purpose of this work is to investigate 'edge-on' illuminated Porous Plate (PP) detectors for applications in diagnostic X-ray imaging. MicroChannel Plate (MCP), which is a common type of PP, has previously been investigated as a detector in surface-on illumination mode for medical X-ray imaging. However, its detection efficiency was too low for medical imaging applications. In the present study, the PP are used in the 'edge-on' illumination mode. Furthermore, the structural parameters of different PP types are optimized to improve the detection efficiency in the diagnostic X...

A mixed methods study of foreign language teachers implementing technology-enhanced multimedia instructio

Directory of Open Access Journals (Sweden)

Olha Ketsman

2014-08-01

Full Text Available Technology-enhanced multimedia instruction offers benefits for foreign language learners. Despite having much potential, technology itself is neither effective or nor effective, but teachers play a key role in determining its effectiveness because they are in charge of making instructional decisions and choose whether and how to use technology. This article fills a gap in the literature by reporting findings of a mixed methods study of technology- enhanced multimedia instruction in middle and high school foreign language classrooms. Convergent parallel mixed methods design was applied in this study and data was collected through quantitative survey and qualitative semi-structured interviews with teachers. Results from the study indicated a significant positive correlation between variables that contribute to the use of technology-enhanced multimedia instruction in foreign language classrooms and described effective technology-enhanced multimedia practices. The findings of the study have implications for teachers, administrators and faculty of teacher preparation programs as well as state teacher education policy makers.

Geometry of illumination, luminance contrast, and gloss perception.

Science.gov (United States)

Leloup, Frédéric B; Pointer, Michael R; Dutré, Philip; Hanselaer, Peter

2010-09-01

The influence of both the geometry of illumination and luminance contrast on gloss perception has been examined using the method of paired comparison. Six achromatic glass samples having different lightness were illuminated by two light sources. Only one of these light sources was visible in reflection by the observer. By separate adjustment of the intensity of both light sources, the luminance of both the reflected image and the adjacent off-specular surroundings could be individually varied. It was found that visual gloss appraisal did not correlate with instrumentally measured specular gloss; however, psychometric contrast seemed to be a much better correlate. It has become clear that not only the sample surface characteristics determine gloss perception: the illumination geometry could be an even more important factor.

Color and illuminance level of lighting can modulate willingness to eat bell peppers.

Science.gov (United States)

Hasenbeck, Aimee; Cho, Sungeun; Meullenet, Jean-François; Tokar, Tonya; Yang, Famous; Huddleston, Elizabeth A; Seo, Han-Seok

2014-08-01

Food products are often encountered under colored lighting, particularly in restaurants and retail stores. However, relatively little attention has been paid to whether the color of ambient lighting can affect consumers' motivation for consumption. This study aimed to determine whether color (Experiment 1) and illuminance level (Experiment 2) of lighting can influence consumers' liking of appearance and their willingness to eat bell peppers. For red, green, and yellow bell peppers, yellow and blue lighting conditions consistently increased participants' liking of appearance the most and the least, respectively. Participants' willingness to consume bell peppers increased the most under yellow lighting and the least under blue lighting. In addition, a dark condition (i.e. low level of lighting illuminance) decreased liking of appearance and willingness to eat the bell peppers compared to a bright condition (i.e. high level of lighting illuminance). Our findings demonstrate that lighting color and illuminance level can influence consumers' hedonic impression and likelihood to consume bell peppers. Furthermore, the influences of color and illuminance level of lighting appear to be dependent on the surface color of bell peppers. © 2013 Society of Chemical Industry.

Making sense of a new technology in clinical practice: a qualitative study of patient and physician perspectives.

Science.gov (United States)

Pals, Regitze A S; Hansen, Ulla M; Johansen, Clea B; Hansen, Christian S; Jørgensen, Marit E; Fleischer, Jesper; Willaing, Ingrid

2015-09-22

The number of new technologies for risk assessment available in health care is increasing. These technologies are intended to contribute to both improved care practices and improved patient outcomes. To do so however, there is a need to study how new technologies are understood and interpreted by users in clinical practice. The objective of this study was to explore patient and physician perspectives on the usefulness of a new technology to detect Cardiovascular Autonomic Neuropathy (CAN) in a specialist diabetes clinic. The technology is a handheld device that measures resting heart rate and conducts three cardiac autonomic reflex tests to evaluate heart rate variability. The study relied on three sources of data: observations of medical consultations where results of the CAN test were reported (n = 8); interviews with patients who had received the CAN test (n = 19); and interviews with physicians who reported results of the CAN test (n = 9). Data were collected at the specialist diabetes clinic between November 2013 and January 2014. Data were analysed using the concept of technological frames which is used to assess how physicians and patients understand and interpret the new technology. Physicians generally found it difficult to communicate test results to patients in terms that patients could understand and to translate results into meaningful implications for the treatment of patients. Results of the study indicate that patients did not recall having done the CAN test nor recall receiving the results. Furthermore, patients were generally unsure about the purpose of the CAN test and the implications of the results. Involving patients and physicians is essential when a new technology is introduced in clinical practice. This particularly includes the interpretation and communication processes related to its use. The integration of a new risk assessment technology into clinical practice can be accompanied by several challenges. It is suggested that

The importance of illumination in nest site choice and nest characteristics of cavity nesting birds.

Science.gov (United States)

Podkowa, Paweł; Surmacki, Adrian

2017-05-02

Light has a significant impact on many aspects of avian biology, physiology and behaviour. An increasing number of studies show that illumination may positively influences birds' offspring fitness by e.g. acceleration of embryo development, stimulation of skeleton growth or regulation of circadian rhythm. Because nest cavities have especially low illumination, suitable light levels may be especially important for species which nest there. We may therefore expect that birds breeding in relatively dim conditions should prefer brighter nest sites and/or evolve behavioral mechanisms to secure sufficient light levels in the nest. Using nest boxes with modified internal illumination, we experimentally tested whether light regime is a cue for nest site selection of secondary cavity-nesting species. Additionally, we investigated whether nest building strategies are tuned to internal illumination. Our results demonstrate that, nest boxes with elevated illumination were chosen twice as often as dark nest boxes. Moreover, birds built higher nests in dark nest boxes than birds in boxes with elevated illumination, which suggests a mechanism of compensating for low light conditions. Our results provide the first experimental support for the idea that nest site choice and nest building behaviour in cavity-nesting birds are influenced by ambient illumination.

Case Study on the Impact of Technology on Incivility in Higher Education

Science.gov (United States)

Bartlett, Michelle E.; Bartlett, James E.

2016-01-01

A qualitative case study research design provided an in-depth perspective of the participants in relation to understanding the holistic impact technology has on the incivility of student-to-student and student-to-faculty interactions in higher education. The conceptual framework by Twale and Deluca (2008), based upon Salin's (2003) proposed model…

Light-Emitting Diode-Based Illumination System for In Vitro Photodynamic Therapy

OpenAIRE

Defu Chen; Huifen Zheng; Zhiyong Huang; Huiyun Lin; Zhidong Ke; Shusen Xie; Buhong Li

2012-01-01

The aim of this study is to develop a light-emitting diode- (LED-) based illumination system that can be used as an alternative light source for in vitro photodynamic therapy (PDT). This illumination system includes a red LED array composed of 70 LEDs centered at 643 nm, an air-cooling unit, and a specific-designed case. The irradiance as a function of the irradiation distance between the LED array and the sample, the homogeneity and stability of irradiation, and the effect of long-time irrad...

Barriers and Benefits in Telemedicine Arising Between a High-Technology Hospital Service Provider and Remote Public Healthcare Units: A Qualitative Study in Brazil.

Science.gov (United States)

de Souza, Carlos Henrique Amaral; Morbeck, Renata Albaladejo; Steinman, Milton; Hors, Cora Pereira; Bracco, Mario Maia; Kozasa, Elisa H; Leão, Eliseth Ribeiro

2017-06-01

In Brazil, the Program for Institutional Development of the Unified Healthcare System (PROADI-SUS) has implemented a telemedicine service for urgent situations and emergencies. It is delivered by a high-technology (HT) hospital to 15 remote healthcare units (RUs) in 11 different Brazilian states. The aim of this study was to investigate possible barriers and benefits in telemedicine service among these units. We performed a qualitative study on the perceptions of physicians involved in telemedicine service in their role as providers and consultants. An individual, semistructured recorded interview was conducted with 28 physicians (17 HT; 11 RU) encompassing telemedicine resources and interaction among HT and RU physicians. Data analysis was performed by Discourse of Collective Subject. We identified the following barriers in the telemedicine service: (1) lack of experience in the use of technology or the quality of the internet signal; (2) the multiplicity of different telemedicine platforms; (3) the quality of the image sent to the HT hospital; (4) the misunderstanding that telemedicine is a time-consuming technology instead of a resource that may help to save lives; (5) not feeling comfortable exposing doubts to other HT colleagues; (6) problems in the management of telemedicine use in the RUs; and (7) political and legal issues. However, important benefits in telemedicine service were also described. The structural barriers should be the target of hospital managers. Development of standard remote care protocols may increase the use of telemedicine and create new work routines. Given the relationship difficulties among the RU and HT doctors during telemedicine consultations, other meetings should be organized to allow more interpersonal interactions. These meetings may also have the goal of sharing outcome indicators of their joint activity in telemedicine to stimulate and make them aware of the benefits of their interaction.

Effect of ultraviolet illumination on metal oxide resistive memory

KAUST Repository

Duran Retamal, Jose Ramon

2014-12-22

We investigate the photoelectrical and resistive switching properties of Pt/ZnO/Pt capacitor operated in unipolar mode under ultraviolet (UV) illumination. The oxygen photodesorption under UV illumination explains the photoconduction observed in initial and high resistance states. Meanwhile, oxygen readsorption at surface-related defects justifies the different photoresponses dynamics in both states. Finally, UV illumination significantly reduces the variations of resistance in high resistance state, set voltage and reset voltage by 58%, 33%, and 25%, respectively, stabilizing Pt/ZnO/Pt capacitor. Our findings in improved switching uniformity via UV light give physical insight into designing resistive memory devices.

Effect of ultraviolet illumination on metal oxide resistive memory

KAUST Repository

Duran Retamal, Jose Ramon; Kang, Chen-Fang; Ho, Chih-Hsiang; Ke, Jr-Jian; Chang, Wen-Yuan; He, Jr-Hau

2014-01-01

We investigate the photoelectrical and resistive switching properties of Pt/ZnO/Pt capacitor operated in unipolar mode under ultraviolet (UV) illumination. The oxygen photodesorption under UV illumination explains the photoconduction observed in initial and high resistance states. Meanwhile, oxygen readsorption at surface-related defects justifies the different photoresponses dynamics in both states. Finally, UV illumination significantly reduces the variations of resistance in high resistance state, set voltage and reset voltage by 58%, 33%, and 25%, respectively, stabilizing Pt/ZnO/Pt capacitor. Our findings in improved switching uniformity via UV light give physical insight into designing resistive memory devices.

Exploring the situational motivation of medical specialists: a qualitative study.

Science.gov (United States)

van der Burgt, Stéphanie M E; Kusurkar, Rashmi A; Croiset, Gerda; Peerdeman, Saskia M

2018-02-26

The aim was to obtain insight into the factors in the work environment that motivate or demotivate a medical specialist during his/her working day. A qualitative ethnographic design was used, and a constructivist approach was adopted with the Self-Determination theory of motivation as a framework. Six medical specialists from VU University Medical Center in the Netherlands, recruited through convenience, snowball, and purposive sampling, were shadowed for one day each. Data were transcribed and open-coded. Themes were finalized through discussion and consensus. Sixty hours of observation data identified motivating and demotivating factors categorized into four themes that are important for specialists' motivation. Informational technology issues are demotivating factors. Working with colleagues can be both a motivating and demotivating factor, e.g., filling in for each other through feelings of relatedness was motivating. Being in control of one's planning through feelings of autonomy was motivating. Furthermore, patient care and teaching, especially in combination, stimulated specialists' motivation. Regarding the design of the study, we found that situational motivation is indeed observable. The basic psychological needs autonomy, competence, and relatedness are important for specialists' motivation. Investing in a more motivating, open, transparent, and basic-needs- supportive work environment for medical specialists is necessary. Keywords: Continuing professional development, motivation, medical specialists, self-determination theory, qualitative research.

Evaluating an mHealth App for Health and Well-Being at Work: Mixed-Method Qualitative Study

Science.gov (United States)

Wiezer, Noortje; Janssen, Joris H; Vink, Peter; Kraaij, Wessel

2018-01-01

Background To improve workers’ health and well-being, workplace interventions have been developed, but utilization and reach are unsatisfactory, and effects are small. In recent years, new approaches such as mobile health (mHealth) apps are being developed, but the evidence base is poor. Research is needed to examine its potential and to assess when, where, and for whom mHealth is efficacious in the occupational setting. To develop interventions for workers that actually will be adopted, insight into user satisfaction and technology acceptance is necessary. For this purpose, various qualitative evaluation methods are available. Objective The objectives of this study were to gain insight into (1) the opinions and experiences of employees and experts on drivers and barriers using an mHealth app in the working context and (2) the added value of three different qualitative methods that are available to evaluate mHealth apps in a working context: interviews with employees, focus groups with employees, and a focus group with experts. Methods Employees of a high-tech company and experts were asked to use an mHealth app for at least 3 weeks before participating in a qualitative evaluation. Twenty-two employees participated in interviews, 15 employees participated in three focus groups, and 6 experts participated in one focus group. Two researchers independently coded, categorized, and analyzed all quotes yielded from these evaluation methods with a codebook using constructs from user satisfaction and technology acceptance theories. Results Interviewing employees yielded 785 quotes, focus groups with employees yielded 266 quotes, and the focus group with experts yielded 132 quotes. Overall, participants muted enthusiasm about the app. Combined results from the three evaluation methods showed drivers and barriers for technology, user characteristics, context, privacy, and autonomy. A comparison between the three qualitative methods showed that issues revealed by experts

Optimization of illuminating system to detect optical properties inside a finger

Science.gov (United States)

Sano, Emiko; Shikai, Masahiro; Shiratsuki, Akihide; Maeda, Takuji; Matsushita, Masahito; Sasakawa, Koichi

2007-01-01

Biometrics performs personal authentication using individual bodily features including fingerprints, faces, etc. These technologies have been studied and developed for many years. In particular, fingerprint authentication has evolved over many years, and fingerprinting is currently one of world's most established biometric authentication techniques. Not long ago this technique was only used for personal identification in criminal investigations and high-security facilities. In recent years, however, various biometric authentication techniques have appeared in everyday applications. Even though providing great convenience, they have also produced a number of technical issues concerning operation. Generally, fingerprint authentication is comprised of a number of component technologies: (1) sensing technology for detecting the fingerprint pattern; (2) image processing technology for converting the captured pattern into feature data that can be used for verification; (3) verification technology for comparing the feature data with a reference and determining whether it matches. Current fingerprint authentication issues, revealed in research results, originate with fingerprint sensing technology. Sensing methods for detecting a person's fingerprint pattern for image processing are particularly important because they impact overall fingerprint authentication performance. The following are the current problems concerning sensing methods that occur in some cases: Some fingers whose fingerprints used to be difficult to detect by conventional sensors. Fingerprint patterns are easily affected by the finger's surface condition, such noise as discontinuities and thin spots can appear in fingerprint patterns obtained from wrinkled finger, sweaty finger, and so on. To address these problems, we proposed a novel fingerprint sensor based on new scientific knowledge. A characteristic of this new method is that obtained fingerprint patterns are not easily affected by the finger

Illumination Tolerance for Visual Navigation with the Holistic Min-Warping Method

Directory of Open Access Journals (Sweden)

Ralf Möller

2014-02-01

Full Text Available Holistic visual navigation methods are an emerging alternative to the ubiquitous feature-based methods. Holistic methods match entire images pixel-wise instead of extracting and comparing local feature descriptors. In this paper we investigate which pixel-wise distance measures are most suitable for the holistic min-warping method with respect to illumination invariance. Two novel approaches are presented: tunable distance measures—weighted combinations of illumination-invariant and illumination-sensitive terms—and two novel forms of “sequential” correlation which are only invariant against intensity shifts but not against multiplicative changes. Navigation experiments on indoor image databases collected at the same locations but under different conditions of illumination demonstrate that tunable distance measures perform optimally by mixing their two portions instead of using the illumination-invariant term alone. Sequential correlation performs best among all tested methods, and as well but much faster in an approximated form. Mixing with an additional illumination-sensitive term is not necessary for sequential correlation. We show that min-warping with approximated sequential correlation can successfully be applied to visual navigation of cleaning robots.

Local Relation Map: A Novel Illumination Invariant Face Recognition Approach

Directory of Open Access Journals (Sweden)

Lian Zhichao

2012-10-01

Full Text Available In this paper, a novel illumination invariant face recognition approach is proposed. Different from most existing methods, an additive term as noise is considered in the face model under varying illuminations in addition to a multiplicative illumination term. High frequency coefficients of Discrete Cosine Transform (DCT are discarded to eliminate the effect caused by noise. Based on the local characteristics of the human face, a simple but effective illumination invariant feature local relation map is proposed. Experimental results on the Yale B, Extended Yale B and CMU PIE demonstrate the outperformance and lower computational burden of the proposed method compared to other existing methods. The results also demonstrate the validity of the proposed face model and the assumption on noise.

Downhole interferometric illumination diagnosis and balancing

OpenAIRE

Van der Neut, J.

2012-01-01

With seismic interferometry or the virtual source method, controlled sources can be redatumed from the Earth’s surface to generate so-called virtual sources at downhole receiver locations. Generally this is done by crosscorrelation of the recorded down-hole data and stacking over source locations. By studying the retrieved data at zero time lag, downhole illumination conditions that determine the virtual source radi- ation pattern can be analyzed without a velocity model. This can be benefici...

Investigating the use of an adjustment task to set preferred illuminances in a workplace environment

DEFF Research Database (Denmark)

Logadóttir, Ásta; Christoffersen, Jens; Fotios, Steve

2011-01-01

An experiment was carried out to examine user preferences for light level using the method of adjustment. The study sought preferred illuminances under lighting from fluorescent lamps of different correlated colour temperature. It was hypothesised that the preferred illuminance would be influenced...

Describing an Environment for a Self-Sustaining Technology Transfer Service in a Small Research Budget University: A Case Study

Science.gov (United States)

Nieb, Sharon Lynn

2014-01-01

This single-site qualitative study sought to identify the characteristics that contribute to the self sustainability of technology transfer services at universities with small research budgets through a case study analysis of a small research budget university that has been operating a financially self-sustainable technology transfer service for…

The duality in using information and communication technology in elder care.

Science.gov (United States)

Sävenstedt, Stefan; Sandman, P O; Zingmark, Karin

2006-10-01

The aim of this paper is to report a study illuminating values and perceptions held by professional carers of older people about the use of information and communication technology applications. Various information and communication technology applications have successfully been developed to help solve a variety of problems in elder care. Beside different technical barriers and the assumed negative attitudes among older people, staff values and attitudes have been found to be an important cause of resistance to change and slowness in introduction of information and communication technology in health care of older people. An interview study was conducted in 2004 with 10 healthcare personnel with 3-26 years experience of working in home care and nursing homes in Northern Sweden. Qualitative content analysis was used to identify recurring themes in the data. The interpretation of values and perceptions among carers revealed a duality where the carers perceived information and communication technology as a promoter of both inhumane and humane care, a duality that seemed to make them defensive and resistant to change. Within the overall duality, other dualities were embedded that described both perceptions about the care of older people and about being a carer. There was evidence of resistance among professional carers towards an introduction of information and communication technology applications in elder care. Carers considered that the same attributes of information and communication technology that could promote humane care could also lead to dehumanized care. There should be an ethical discussion when introducing information and communication technology applications in elder care. The best caring alternative for all those concerned should be considered. It should promote aspects of wellbeing and dignity for frail older people and fears of inhumane care among carers must be recognized and discussed.

The relationship between ambient illumination and psychological factors in viewing of display Images

Science.gov (United States)

Iwanami, Takuya; Kikuchi, Ayano; Kaneko, Takashi; Hirai, Keita; Yano, Natsumi; Nakaguchi, Toshiya; Tsumura, Norimichi; Yoshida, Yasuhiro; Miyake, Yoichi

2009-01-01

In this paper, we have clarified the relationship between ambient illumination and psychological factors in viewing of display images. Psychological factors were obtained by the factor analysis with the results of the semantic differential (SD) method. In the psychological experiments, subjects evaluated the impressions of displayed images with changing ambient illuminating conditions. The illumination conditions were controlled by a fluorescent ceiling light and a color LED illumination which was located behind the display. We experimented under two kinds of conditions. One was the experiment with changing brightness of the ambient illumination. The other was the experiment with changing the colors of the background illumination. In the results of the experiment, two factors "realistic sensation, dynamism" and "comfortable," were extracted under different brightness of the ambient illumination of the display surroundings. It was shown that the "comfortable" was improved by the brightness of display surroundings. On the other hand, when the illumination color of surroundings was changed, three factors "comfortable," "realistic sensation, dynamism" and "activity" were extracted. It was also shown that the value of "comfortable" and "realistic sensation, dynamism" increased when the display surroundings were illuminated by the average color of the image contents.

A study of the impact of technology in early education

OpenAIRE

Wajszczyk, Rafal

2014-01-01

The purpose of this study is to analyse the current state of the use of Information and communication technology (ICT) and its impact on pupils in their early stages of education. The aim is to find out how, when and in what context ICT is used in the work with students. The overall objective is to study teachers views on ICT and their opinion on how ICT does affects pupils - positively or negatively. The results of this study are based on both a literature review and a qualitative study. The...

Doing Qualitative Studies, Using Statistical Reasoning

DEFF Research Database (Denmark)

Kristensen, Tore; Gabrielsen, Gorm

2016-01-01

Qualitative studies are associated with interviews, focus groups and observations. We introduce experiments as a way of dealing with such studies. In contrast to the common focus on how many respondents choose a particular behaviour we focus on how much a design affect the individual. This is often...

Inactivation and changes in metabolic profile of selected foodborne bacteria by 460 nm LED illumination.

Science.gov (United States)

Kumar, Amit; Ghate, Vinayak; Kim, Min-Jeong; Zhou, Weibiao; Khoo, Gek Hoon; Yuk, Hyun-Gyun

2017-05-01

The objective of this study was to investigate the effect of 460 nm light-emitting diode (LED) on the inactivation of foodborne bacteria. Additionally, the change in the endogenous metabolic profile of LED illuminated cells was analyzed to understand the bacterial response to the LED illumination. Six different species of bacteria (Bacillus cereus, Listeria monocytogenes, Staphylococcus aureus, Escherichia coli O157:H7, Pseudomonas aeruginosa and Salmonella Typhimurium) were illuminated with 460 nm LED to a maximum dose of 4080 J/cm 2 at 4, 10 and 25 °C. Inactivation curves were modeled using Hom model. Metabolic profiling of the non-illuminated and illuminated cells was performed using a Liquid chromatography-mass spectrometry system. Results indicate that the 460 nm LED significantly (p illuminated cells indicated that several metabolites e.g. 11-deoxycortisol, actinonin, coformycin, tyramine, chitobiose etc. were regulated during LED illumination. These results elucidate the effectiveness of 460 nm LED against foodborne bacteria and hence, its suitability as a novel antimicrobial control method to ensure food safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

Guidelines for Qualitative Research in Organization Studies: Controversy and Possibilities

Directory of Open Access Journals (Sweden)

Maria Fernanda Rios Cavalcanti

2017-09-01

Full Text Available The aim of the present article is to tackle the controversy of establishing guidelines for qualitative research in Organization and Management Theory (OMT and to present a summary of suggestions on how to conduct good qualitative research given by methodologists on top-tier international publications. In order to do so, the article discusses: general guidelines for qualitative research; how to achieve coherence and transparency in a qualitative empirical study; the meaning and importance of the concept of reflexivity; and, finally how to establish a theoretical contribution and transferability of findings in such context. The work presents a valuable contribution because such guidelines, concepts, and approaches can be adopted by students and researchers when conducting a qualitative research proposal, and by periodic reviewers to evaluate the quality of existing empirical studies.

Alternative Packaging for Back-Illuminated Imagers

Science.gov (United States)

Pain, Bedabrata

2009-01-01

An alternative scheme has been conceived for packaging of silicon-based back-illuminated, back-side-thinned complementary metal oxide/semiconductor (CMOS) and charge-coupled-device image-detector integrated circuits, including an associated fabrication process. This scheme and process are complementary to those described in "Making a Back-Illuminated Imager With Back-Side Connections" (NPO-42839), NASA Tech Briefs, Vol. 32, No. 7 (July 2008), page 38. To avoid misunderstanding, it should be noted that in the terminology of imaging integrated circuits, "front side" or "back side" does not necessarily refer to the side that, during operation, faces toward or away from a source of light or other object to be imaged. Instead, "front side" signifies that side of a semiconductor substrate upon which the pixel pattern and the associated semiconductor devices and metal conductor lines are initially formed during fabrication, and "back side" signifies the opposite side. If the imager is of the type called "back-illuminated," then the back side is the one that faces an object to be imaged. Initially, a back-illuminated, back-side-thinned image-detector is fabricated with its back side bonded to a silicon handle wafer. At a subsequent stage of fabrication, the front side is bonded to a glass wafer (for mechanical support) and the silicon handle wafer is etched away to expose the back side. The frontside integrated circuitry includes metal input/output contact pads, which are rendered inaccessible by the bonding of the front side to the glass wafer. Hence, one of the main problems is to make the input/output contact pads accessible from the back side, which is ultimately to be the side accessible to the external world. The present combination of an alternative packaging scheme and associated fabrication process constitute a solution of the problem.

Case Study: Employee Use of Information and Communication Technologies in a Healthcare Organization

Science.gov (United States)

Aponte, Jorge I.

2011-01-01

This qualitative case study explored the employee use of information and communication technologies (ICT) in a southern Puerto Rico healthcare organization. Thirty-two employees of a southern Puerto Rico healthcare organization provided their perspectives regarding their use of ICT in the workplace. The findings distinguished how employees use ICT…

Meta-Study as Diagnostic: Toward Content Over Form in Qualitative Synthesis.

Science.gov (United States)

Frost, Julia; Garside, Ruth; Cooper, Chris; Britten, Nicky

2016-02-01

Having previously conducted qualitative syntheses of the diabetes literature, we wanted to explore the changes in theoretical approaches, methodological practices, and the construction of substantive knowledge which have recently been presented in the qualitative diabetes literature. The aim of this research was to explore the feasibility of synthesizing existing qualitative syntheses of patient perspectives of diabetes using meta-study methodology. A systematic review of qualitative literature, published between 2000 and 2013, was conducted. Six articles were identified as qualitative syntheses. The meta-study methodology was used to compare the theoretical, methodological, analytic, and synthetic processes across the six studies, exploring the potential for an overarching synthesis. We identified that while research questions have increasingly concentrated on specific aspects of diabetes, the focus on systematic review processes has led to the neglect of qualitative theory and methods. This can inhibit the production of compelling results with meaningful clinical applications. Although unable to produce a synthesis of syntheses, we recommend that researchers who conduct qualitative syntheses pay equal attention to qualitative traditions and systematic review processes, to produce research products that are both credible and applicable. © The Author(s) 2015.

Transforming Verbal Counts in Reports of Qualitative Descriptive Studies Into Numbers

Science.gov (United States)

Chang, YunKyung; Voils, Corrine I.; Sandelowski, Margarete; Hasselblad, Vic; Crandell, Jamie L.

2009-01-01

Reports of qualitative studies typically do not offer much information on the numbers of respondents linked to any one finding. This information may be especially useful in reports of basic, or minimally interpretive, qualitative descriptive studies focused on surveying a range of experiences in a target domain, and its lack may limit the ability to synthesize the results of such studies with quantitative results in systematic reviews. Accordingly, the authors illustrate strategies for deriving plausible ranges of respondents expressing a finding in a set of reports of basic qualitative descriptive studies on antiretroviral adherence and suggest how the results might be used. These strategies have limitations and are never appropriate for use with findings from interpretive qualitative studies. Yet they offer a temporary workaround for preserving and maximizing the value of information from basic qualitative descriptive studies for systematic reviews. They show also why quantitizing is never simply quantitative. PMID:19448052

Pulsed laser illumination of photovoltaic cells

Science.gov (United States)

Yater, Jane A.; Lowe, Roland A.; Jenkins, Phillip P.; Landis, Geoffrey A.

1995-01-01

In future space missions, free electron lasers (FEL) may be used to illuminate photovoltaic receivers to provide remote power. Both the radio-frequency (RF) and induction FEL produce pulsed rather than continuous output. In this work we investigate cell response to pulsed laser light which simulates the RF FEL format. The results indicate that if the pulse repetition is high, cell efficiencies are only slightly reduced compared to constant illumination at the same wavelength. The frequency response of the cells is weak, with both voltage and current outputs essentially dc in nature. Comparison with previous experiments indicates that the RF FEL pulse format yields more efficient photovoltaic conversion than does an induction FEL format.

Sample Size in Qualitative Interview Studies: Guided by Information Power.

Science.gov (United States)

Malterud, Kirsti; Siersma, Volkert Dirk; Guassora, Ann Dorrit

2015-11-27

Sample sizes must be ascertained in qualitative studies like in quantitative studies but not by the same means. The prevailing concept for sample size in qualitative studies is "saturation." Saturation is closely tied to a specific methodology, and the term is inconsistently applied. We propose the concept "information power" to guide adequate sample size for qualitative studies. Information power indicates that the more information the sample holds, relevant for the actual study, the lower amount of participants is needed. We suggest that the size of a sample with sufficient information power depends on (a) the aim of the study, (b) sample specificity, (c) use of established theory, (d) quality of dialogue, and (e) analysis strategy. We present a model where these elements of information and their relevant dimensions are related to information power. Application of this model in the planning and during data collection of a qualitative study is discussed. © The Author(s) 2015.

Can a Tablet Device Alter Undergraduate Science Students' Study Behavior and Use of Technology?

Science.gov (United States)

Morris, Neil P.; Ramsay, Luke; Chauhan, Vikesh

2012-01-01

This article reports findings from a study investigating undergraduate biological sciences students' use of technology and computer devices for learning and the effect of providing students with a tablet device. A controlled study was conducted to collect quantitative and qualitative data on the impact of a tablet device on students' use of…

Continuing medical education revisited: theoretical assumptions and practical implications: a qualitative study.

Science.gov (United States)

Dionyssopoulos, Alexander; Karalis, Thanassis; Panitsides, Eugenia A

2014-12-31

Recent research has evidenced that although investment in Continuing Medical Education (CME), both in terms of participation as well as financial resources allocated to it, has been steadily increasing to catch up with accelerating advances in health information and technology, effectiveness of CME is reported to be rather limited. Poor and disproportional returns can be attributed to failure of CME courses to address and stimulate an adult audience. The present study initially drew on research findings and adult learning theories, providing the basis for comprehending adult learning, while entailing practical implications on fostering effectiveness in the design and delivery of CME. On a second level, a qualitative study was conducted with the aim to elucidate parameters accounting for effectiveness in educational interventions. Qualitative data was retrieved through 12 in-depth interviews, conducted with a random sample of participants in the 26th European Workshop of Advanced Plastic Surgery (EWAPS). The data underwent a three level qualitative analysis, following the "grounded theory" methodology, comprising 'open coding', 'axial coding' and 'selective coding'. Findings from the EWAPS study come in line with relevant literature, entailing significant implications for the necessity to apply a more effective and efficient paradigm in the design and delivery of educational interventions, advocating for implementing learner-centered schemata in CME and benefiting from a model that draws on the learning environment and social aspects of learning. What emerged as a pivotal parameter in designing educational interventions is to focus on small group educational events which could provide a supportive friendly context, enhance motivation through learner-centered approaches and allow interaction, experimentation and critical reflection. It should be outlined however that further research is required as the present study is limited in scope, having dealt with a limited

Study of chromatic adaptation using memory color matches, Part I: neutral illuminants

OpenAIRE

Smet, Kevin A.G.; Zhai, Qiyan; Luo, Ming R.; Hanselaer, Peter

2017-01-01

Twelve corresponding color data sets have been obtained using the long-term memory colors of familiar objects as target stimuli. Data were collected for familiar objects with neutral, red, yellow, green and blue hues under 4 approximately neutral illumination conditions on or near the blackbody locus. The advantages of the memory color matching method are discussed in light of other more traditional asymmetric matching techniques. Results were compared to eight corresponding color data sets a...

Estimation of luminous efficacy of daylight and illuminance for composite climate

Energy Technology Data Exchange (ETDEWEB)

Ahmad, Jamil M.; Tiwari, G.N. [Center for Energy Studies, Indian Institute of Technology, Hauz Khas, New Delhi-16 (India)

2010-07-01

This Daylighting is one of the basic components of passive solar building design and its estimation is essential. In India there are a few available data of measured illuminance as in many regions of the world. The Indian climate is generally clear with overcast conditions prevailing through the months of July to September, which provides good potential to daylighting in buildings. Therefore, an analytical model that would encompass the weather conditions of New Delhi was selected. Hourly exterior horizontal and slope daylight availability has been estimated for New Delhi using daylight modeling techniques based on solar radiation data. A model to estimate interior illuminance was investigated and validated using experimental hourly inside illuminance data of an existing skylight integrated vault roof mud house in composite climate of New Delhi. The interior illuminance model was found in good agreement with experimental value of interior illuminance.

Information technology companies with focus on sustainable economy: a case study

Directory of Open Access Journals (Sweden)

Robson da Silva Teixeira

2016-01-01

Full Text Available This article discusses how knowledge is used in sustainable economic development. The survey was drawn from the mapping of four companies that work with information technology, in order to qualitatively analyze the relevance of these enterprises in the economic scenario of the country and how they deal with the "product knowledge." The results showed the investment by all firms studied in the qualification of its workforce and managing the quality of their products and services. Finally, it is concluded that there is much room for information technology grow in Brazil, just invest in innovation.

Simulation and comparison of the illuminance, uniformity, and efficiency of different forms of lighting used in basketball court illumination.

Science.gov (United States)

Sun, Wen-Shing; Tien, Chuen-Lin; Tsuei, Chih-Hsuan; Pan, Jui-Wen

2014-10-10

We simulate and compare the illuminance, uniformity, and efficiency of metal-halide lamps, white LED light sources, and hybrid light box designs combining sunlight and white LED lighting used for indoor basketball court illumination. According to the optical simulation results and our examination of real situations, we find that hybrid light box designs combining sunlight and white LEDs do perform better than either metal-halide lamps or white LED lights. An evaluation of the sunlight concentrator system used in our inverted solar cell shows that the energy consumption of stadium lighting can be reduced significantly.

A Curious Problem with Using the Colour Checker Dataset for Illuminant Estimation

OpenAIRE

Finlayson, Graham; Hemrit, Ghalia; Gijsenij, Arjan; Gehler, Peter

2017-01-01

In illuminant estimation, we attempt to estimate the RGB of the light. We then use this estimate on an image to correct for the light's colour bias. Illuminant estimation is an essential component of all camera reproduction pipelines. How well an illuminant estimation algorithm works is determined by how well it predicts the ground truth illuminant colour. Typically, the ground truth is the RGB of a white surface placed in a scene. Over a large set of images an estimation error is calculated ...

Noise tolerant illumination optimization applied to display devices

Science.gov (United States)

Cassarly, William J.; Irving, Bruce

2005-02-01

Display devices have historically been designed through an iterative process using numerous hardware prototypes. This process is effective but the number of iterations is limited by the time and cost to make the prototypes. In recent years, virtual prototyping using illumination software modeling tools has replaced many of the hardware prototypes. Typically, the designer specifies the design parameters, builds the software model, predicts the performance using a Monte Carlo simulation, and uses the performance results to repeat this process until an acceptable design is obtained. What is highly desired, and now possible, is to use illumination optimization to automate the design process. Illumination optimization provides the ability to explore a wider range of design options while also providing improved performance. Since Monte Carlo simulations are often used to calculate the system performance but those predictions have statistical uncertainty, the use of noise tolerant optimization algorithms is important. The use of noise tolerant illumination optimization is demonstrated by considering display device designs that extract light using 2D paint patterns as well as 3D textured surfaces. A hybrid optimization approach that combines a mesh feedback optimization with a classical optimizer is demonstrated. Displays with LED sources and cold cathode fluorescent lamps are considered.

Multiple speckle illumination for optical-resolution photoacoustic imaging

Science.gov (United States)

Poisson, Florian; Stasio, Nicolino; Moser, Christophe; Psaltis, Demetri; Bossy, Emmanuel

2017-03-01

Optical-resolution photoacoustic microscopy offers exquisite and specific contrast to optical absorption. Conventional approaches generally involves raster scanning a focused spot over the sample. Here, we demonstrate that a full-field illumination approach with multiple speckle illumination can also provide diffraction-limited optical-resolution photoacoustic images. Two different proof-of-concepts are demonstrated with micro-structured test samples. The first approach follows the principle of correlation/ghost imaging,1, 2 and is based on cross-correlating photoacoustic signals under multiple speckle illumination with known speckle patterns measured during a calibration step. The second approach is a speckle scanning microscopy technique, which adapts the technique proposed in fluorescence microscopy by Bertolotti and al.:3 in our work, spatially unresolved photoacoustic measurements are performed for various translations of unknown speckle patterns. A phase-retrieval algorithm is used to reconstruct the object from the knowledge of the modulus of its Fourier Transform yielded by the measurements. Because speckle patterns naturally appear in many various situations, including propagation through biological tissue or multi-mode fibers (for which focusing light is either very demanding if not impossible), speckle-illumination-based photoacoustic microscopy provides a powerful framework for the development of novel reconstruction approaches, well-suited to compressed sensing approaches.2

Hacking commercial quantum cryptography systems by tailored bright illumination

Science.gov (United States)

Lydersen, Lars; Wiechers, Carlos; Wittmann, Christoffer; Elser, Dominique; Skaar, Johannes; Makarov, Vadim

2010-10-01

The peculiar properties of quantum mechanics allow two remote parties to communicate a private, secret key, which is protected from eavesdropping by the laws of physics. So-called quantum key distribution (QKD) implementations always rely on detectors to measure the relevant quantum property of single photons. Here we demonstrate experimentally that the detectors in two commercially available QKD systems can be fully remote-controlled using specially tailored bright illumination. This makes it possible to tracelessly acquire the full secret key; we propose an eavesdropping apparatus built from off-the-shelf components. The loophole is likely to be present in most QKD systems using avalanche photodiodes to detect single photons. We believe that our findings are crucial for strengthening the security of practical QKD, by identifying and patching technological deficiencies.

Separate effects of background and illumination on lightness

Directory of Open Access Journals (Sweden)

Zdravković Sunčica

2007-01-01

Full Text Available Four experiments attempted to establish an effect of context on lightness. Lightness is one of the dimensions of color and it varies from black to white. Most of our stimuli were inspired by simultaneous lightness contrast illusion. First two experiments contrast the size of an effect produced by the change of background color vs. the change in illumination. The third experiment deals with different type of illusions, where the effect is obtained through the appearance of multiple illumination levels. The last experiment takes into account the ratio of the target and the background. The results reveal the size of effects produced separately by the background color and illumination level and suggest the prime importance of background. Also there are other factors such as reflectance range in the scene, incremental and decremental targets, and 2D vs. 3D representation.

Video repairing under variable illumination using cyclic motions.

Science.gov (United States)

Jia, Jiaya; Tai, Yu-Wing; Wu, Tai-Pang; Tang, Chi-Keung

2006-05-01

This paper presents a complete system capable of synthesizing a large number of pixels that are missing due to occlusion or damage in an uncalibrated input video. These missing pixels may correspond to the static background or cyclic motions of the captured scene. Our system employs user-assisted video layer segmentation, while the main processing in video repair is fully automatic. The input video is first decomposed into the color and illumination videos. The necessary temporal consistency is maintained by tensor voting in the spatio-temporal domain. Missing colors and illumination of the background are synthesized by applying image repairing. Finally, the occluded motions are inferred by spatio-temporal alignment of collected samples at multiple scales. We experimented on our system with some difficult examples with variable illumination, where the capturing camera can be stationary or in motion.

Using color histogram normalization for recovering chromatic illumination-changed images.

Science.gov (United States)

Pei, S C; Tseng, C L; Wu, C C

2001-11-01

We propose a novel image-recovery method using the covariance matrix of the red-green-blue (R-G-B) color histogram and tensor theories. The image-recovery method is called the color histogram normalization algorithm. It is known that the color histograms of an image taken under varied illuminations are related by a general affine transformation of the R-G-B coordinates when the illumination is changed. We propose a simplified affine model for application with illumination variation. This simplified affine model considers the effects of only three basic forms of distortion: translation, scaling, and rotation. According to this principle, we can estimate the affine transformation matrix necessary to recover images whose color distributions are varied as a result of illumination changes. We compare the normalized color histogram of the standard image with that of the tested image. By performing some operations of simple linear algebra, we can estimate the matrix of the affine transformation between two images under different illuminations. To demonstrate the performance of the proposed algorithm, we divide the experiments into two parts: computer-simulated images and real images corresponding to illumination changes. Simulation results show that the proposed algorithm is effective for both types of images. We also explain the noise-sensitive skew-rotation estimation that exists in the general affine model and demonstrate that the proposed simplified affine model without the use of skew rotation is better than the general affine model for such applications.

A qualitative study of health information technology in the Canadian public health system

OpenAIRE

Zinszer, Kate; Tamblyn, Robyn; Bates, David W; Buckeridge, David L

2013-01-01

Background: Although the adoption of health information technology (HIT) has advanced in Canada over the past decade, considerable challenges remain in supporting the development, broad adoption, and effective use of HIT in the public health system. Policy makers and practitioners have long recognized that improvements in HIT infrastructure are necessary to support effective and efficient public health practice. The objective of this study was to identify aspects of health information technol...

Transfer between Pose and Illumination Training in Face Recognition

Science.gov (United States)

Liu, Chang Hong; Bhuiyan, Md. Al-Amin; Ward, James; Sui, Jie

2009-01-01

The relationship between pose and illumination learning in face recognition was examined in a yes-no recognition paradigm. The authors assessed whether pose training can transfer to a new illumination or vice versa. Results show that an extensive level of pose training through a face-name association task was able to generalize to a new…

Performance of Series Connected GaAs Photovoltaic Converters under Multimode Optical Fiber Illumination

Directory of Open Access Journals (Sweden)

Tiqiang Shan

2014-01-01

Full Text Available In many military and industrial applications, GaAs photovoltaic (PV converters are connected in series in order to generate the required voltage compatible with most common electronics. Multimode optical fibers are usually used to carry high-intensity laser and illuminate the series connected GaAs PV converters in real time. However, multimode optical fiber illumination has a speckled intensity pattern. The series connected PV array is extremely sensitive to nonuniform illumination; its performance is limited severely by the converter that is illuminated the least. This paper quantifies the effects of multimode optical fiber illumination on the performance of series connected GaAs PV converters, analyzes the loss mechanisms due to speckles, and discusses the maximum illumination efficiency. In order to describe the illumination dependent behavior detailedly, modeling of the series connected PV array is accomplished based on the equivalent circuit for PV cells. Finally, a series of experiments are carried out to demonstrate the theory analysis.

Uniform illumination rendering using an array of LEDs: a signal processing perspective

OpenAIRE

Yang, Hongming; Bergmans, J.W.M.; Schenk, T.C.W.; Linnartz, J.P.M.G.; Rietman, R.

2009-01-01

An array of a large number of LEDs will be widely used in future indoor illumination systems. In this paper, we investigate the problem of rendering uniform illumination by a regular LED array on the ceiling of a room. We first present two general results on the scaling property of the basic illumination pattern, i.e., the light pattern of a single LED, and the setting of LED illumination levels, respectively. Thereafter, we propose to use the relative mean squared error as the cost function ...

Single-cell technologies to study the immune system.

Science.gov (United States)

Proserpio, Valentina; Mahata, Bidesh

2016-02-01

The immune system is composed of a variety of cells that act in a coordinated fashion to protect the organism against a multitude of different pathogens. The great variability of existing pathogens corresponds to a similar high heterogeneity of the immune cells. The study of individual immune cells, the fundamental unit of immunity, has recently transformed from a qualitative microscopic imaging to a nearly complete quantitative transcriptomic analysis. This shift has been driven by the rapid development of multiple single-cell technologies. These new advances are expected to boost the detection of less frequent cell types and transient or intermediate cell states. They will highlight the individuality of each single cell and greatly expand the resolution of current available classifications and differentiation trajectories. In this review we discuss the recent advancement and application of single-cell technologies, their limitations and future applications to study the immune system. © 2015 The Authors. Immunology Published by John Wiley & Sons Ltd.

Readability of self-illuminated signs obscured by black fuel-fire smoke.

Science.gov (United States)

1980-07-01

This study, using black fuel-fire generated smoke, is a partial replication of an earlier study using an inert white smoke as the obscuring agent in the study of the readability of smoke-obscured, self-illuminated emergency exit signs. : The results ...

Direct design of achromatic lens for Lambertian sources in collimating illumination

Science.gov (United States)

Yin, Peng; Xu, Xiping; Jiang, Zhaoguo; Wang, Hongshu

2017-10-01

Illumination design used to redistribute the spatial energy distribution of light source is a key technique in lighting applications. However, there is still no effective illumination design method for the removing of the chromatic dispersion. What we present here is an achromatic lens design to enhance the efficiency and uniform illumination of white light-emitting diode (LED) with diffractive optical element (DOE). We employ the chromatic aberration value (deg) to measure the degree of chromatic dispersion in illumination systems. Monte Carlo ray tracing simulation results indicate that the chromatic dispersion of the modified achromatic collimator significantly decreases from 0.5 to 0.1 with LED chip size of 1.0mm×1.0mm and simulation efficiency of 90.73%, compared with the traditional collimator. Moreover, with different corrected wavelengths we compared different chromatic aberration values that followed with the changing pupil percent. The achromatic collimator provided an effective way to achieve white LED with low chromatic dispersion at high efficiency and uniform illumination.

Introduction and uptake of new medical technologies in the Australian health care system: a qualitative study.

Science.gov (United States)

Gallego, Gisselle; Casey, Robert; Norman, Richard; Goodall, Stephen

2011-10-01

The aim of this study was to explore the views and perceptions of stakeholders about the current national health technology assessment process conducted by the Medical Services Advisory Committee (MSAC) and its role in the uptake and diffusion of new medical technologies in Australia. Data collection occurred over a nine month period (August 2008-April 2009). Twenty in-depth, semi-structured interviews were conducted with individuals from four stakeholders groups: (i) MSAC members and evaluators, (ii) academic and health technology assessment experts, (iii) medical industry representatives and (iv) medical specialists. Interviews were digitally recorded, transcribed verbatim and coded using a constant comparative method. Respondents expressed a consensus opinion that the MSAC process is generally fair and transparent, and has been increasingly so over time. The process was described as "flexible" and "intuitive" yet also "idiosyncratic" due to the nature of the technologies being appraised. Approval by MSAC was generally reported to be increasingly important once a technology becomes more widely used. While successful MSAC approval was felt to be important for widespread distribution of a new technology, it was viewed more as a "facilitator of the uptake of new technologies" as opposed to a primary "driver" of technology uptake. Instead, other factors were identified as providing the actual impetus for the uptake of new technologies, with MSAC approval and reimbursement eventually helping facilitate more widespread diffusion. MSAC's decision making process is perceived as fair but with room for improvement. Its role in the uptake and diffusion of new medical technologies in Australia is limited. MSAC does not act as a barrier to significant market penetration of new procedures and medical technologies. However reimbursement is a trigger for increased use. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Illumination, data transmission, and energy harvesting: the threefold advantage of VLC.

Science.gov (United States)

Sandalidis, Harilaos G; Vavoulas, Alexander; Tsiftsis, Theodoros A; Vaiopoulos, Nicholas

2017-04-20

Visible light communication (VLC) is a promising technology that meets illumination and information transmission requirements in an indoor environment. Because light waves convey energy, a VLC link may exploit that fact for energy harvesting purposes. In this context, a single light emitting diode lamp located at a close distance over a tablet or laptop PC can potentially offer simultaneous lighting, Internet access, and battery recharging without cables. The present study introduces this threefold role of VLC systems by properly adapting some energy harvesting receiver architectures recently launched for usage in RF communications. The rate-energy trade-off for these architectures is revealed in order to maximize the efficiency of simultaneous energy and information reception, by elaborating on indicative numerical results. Furthermore, the performance in terms of the bit-error rate for pulse amplitude modulated signals is investigated. The results obtained offer some useful insights into the effective optical receiver implementation from the aspect of information theory.

In vivo deep brain imaging of rats using oral-cavity illuminated photoacoustic computed tomography

Science.gov (United States)

Lin, Li; Xia, Jun; Wong, Terence T. W.; Zhang, Ruiying; Wang, Lihong V.

2015-03-01

We demonstrate, by means of internal light delivery, photoacoustic imaging of the deep brain of rats in vivo. With fiber illumination via the oral cavity, we delivered light directly into the bottom of the brain, much more than can be delivered by external illumination. The study was performed using a photoacoustic computed tomography (PACT) system equipped with a 512-element full-ring transducer array, providing a full two-dimensional view aperture. Using internal illumination, the PACT system provided clear cross sectional photoacoustic images from the palate to the middle brain of live rats, revealing deep brain structures such as the hypothalamus, brain stem, and cerebral medulla.

Readability of self-illuminated signs in a smoke-obscured environment.

Science.gov (United States)

1979-11-01

This study investigates the ability of people with normal distant visual acuity to identify self-illuminated emergency signs in a smoke-obscured environment. The results indicate that signs whose background luminance meets or exceeds the requirements...

Fast linear method of illumination classification

Science.gov (United States)

Cooper, Ted J.; Baqai, Farhan A.

2003-01-01

We present a simple method for estimating the scene illuminant for images obtained by a Digital Still Camera (DSC). The proposed method utilizes basis vectors obtained from known memory color reflectance to identify the memory color objects in the image. Once the memory color pixels are identified, we use the ratios of the red/green and blue/green to determine the most likely illuminant in the image. The critical part of the method is to estimate the smallest set of basis vectors that closely represent the memory color reflectances. Basis vectors obtained from both Principal Component Analysis (PCA) and Independent Component Analysis (ICA) are used. We will show that only two ICA basis vectors are needed to get an acceptable estimate.

Perceptions of Psychological and Physical Safety Environments of Information Technology Employees: A Phenomenological Study

Science.gov (United States)

Payne, Sheila C.

2012-01-01

A qualitative phenomenological study was conducted to gain a deeper understanding of psychological and safety environments of an oil and gas multinational enterprise. Twenty information technology professionals were interviewed to explore their feelings, perceptions, beliefs, and values of the phenomenon. The interviews elicited data about facets…

Barriers and possibilities for low-carbon-energy consuming technologies

DEFF Research Database (Denmark)

Bjarklev, Araceli

consensus that one of the solutions to the current environmental challenge will be based on low-carbon-technologies, there are many issues that set a barrier for its adequate development and still many actors in these sectors are sceptical about the possibilities. Illumination is a very interesting sector...... to target, since it uses 19% of the total electricity produced in the world. Consequently, this paper takes the Danish office lighting sector as a study object and discusses the question: What are the main barriers and possibilities for the energy saving illumination technologies to efficiently reduce...... their ecological footprint. The discussion is supported by using relevant elements of the cradle-to-grave, eco-design and environmental-innovation theories. It is based on active participation in interdisciplinary projects and face-to-face in-depth interviews with relevant actors along the entire Danish...

Geometry of illumination, luminance contrast, and gloss perception

OpenAIRE

Leloup, Frédéric; Pointer, Michael R.; Dutré, Philip; Hanselaer, Peter

2010-01-01

The influence of both the geometry of illumination and luminance contrast on gloss perception has been examined using the method of paired comparison. Six achromatic glass samples having different lightness were illuminated by two light sources. Only one of these light sources was visible in reflection by the observer. By separate adjustment of the intensity of both light sources, the luminance of both the reflected image and the adjacent off-specular surroundings could be individually varied...

QUALITATIVE METHODS IN CREATIVITY STUDIES

DEFF Research Database (Denmark)

Hertel, Frederik

2015-01-01

In this article we will focus on developing a qualitative research design suitable for conducting case study in creativity. The case is a team of workers (See Hertel, 2015) doing industrial cleaning in the Danish food industry. The hypothesis is that these workers are both participating in......-specific methods, involving a discussion of creativity test, divergent and convergent thinking, for studying creativity in this specific setting. Beside from that we will develop a research design involving a combination of methods necessary for conducting a case study in the setting mentioned....

Evaluating Red Reflex and Surgeon Preference Between Nearly-Collimated and Focused Beam Microscope Illumination Systems.

Science.gov (United States)

Cionni, Robert J; Pei, Ron; Dimalanta, Ramon; Lubeck, David

2015-08-01

To evaluate the intensity and stability of the red reflex produced by ophthalmic surgical microscopes with nearly-collimated versus focused illumination systems and to assess surgeon preference in a simulated surgical setting. This two-part evaluation consisted of postproduction surgical video analysis of red reflex intensity and a microscope use and preference survey completed by 13 experienced cataract surgeons. Survey responses were based on bench testing and experience in a simulated surgical setting. A microscope with nearly-collimated beam illumination and two focused beam microscopes were assessed. Red reflex intensity and stability were greater with the nearly-collimated microscope illumination system. In the bench testing survey, surgeons reported that the red reflex was maintained over significantly greater distances away from pupillary center, and depth of focus was numerically greater with nearly-collimated illumination relative to focused illumination. Most participating surgeons (≥64%) reported a preference for the microscope with nearly-collimated illumination with regard to red reflex stability, depth of focus, visualization, surgical working distance, and perceived patient comfort. The microscope with nearly-collimated illumination produced a more intense and significantly more stable red reflex and was preferred overall by more surgeons. This is the first report of an attempt to quantify red reflex intensity and stability and to evaluate surgically-relevant parameters between microscope systems. The data and methods presented here may provide a basis for future studies attempting to quantify differences between surgical microscopes that may affect surgeon preference and microscope use in ophthalmic surgery.

Extending Whole Slide Imaging: Color Darkfield Internal Reflection Illumination (DIRI for Biological Applications.

Directory of Open Access Journals (Sweden)

Yoshihiro Kawano

Full Text Available Whole slide imaging (WSI is a useful tool for multi-modal imaging, and in our work, we have often combined WSI with darkfield microscopy. However, traditional darkfield microscopy cannot use a single condenser to support high- and low-numerical-aperture objectives, which limits the modality of WSI. To overcome this limitation, we previously developed a darkfield internal reflection illumination (DIRI microscope using white light-emitting diodes (LEDs. Although the developed DIRI is useful for biological applications, substantial problems remain to be resolved. In this study, we propose a novel illumination technique called color DIRI. The use of three-color LEDs dramatically improves the capability of the system, such that color DIRI (1 enables optimization of the illumination color; (2 can be combined with an oil objective lens; (3 can produce fluorescence excitation illumination; (4 can adjust the wavelength of light to avoid cell damage or reactions; and (5 can be used as a photostimulator. These results clearly illustrate that the proposed color DIRI can significantly extend WSI modalities for biological applications.

Hybrid sunlight/LED illumination and renewable solar energy saving concepts for indoor lighting.

Science.gov (United States)

Tsuei, Chih-Hsuan; Sun, Wen-Shing; Kuo, Chien-Cheng

2010-11-08

A hybrid method for using sunlight and light-emitting diode (LED) illumination powered by renewable solar energy for indoor lighting is simulated and presented in this study. We can illuminate an indoor space and collect the solar energy using an optical switching system. When the system is turned off, the full spectrum of the sunlight is concentrated by a concentrator, to be absorbed by solar photovoltaic devices that provide the electricity to power the LEDs. When the system is turned on, the sunlight collected by the concentrator is split into visible and non-visible rays by a beam splitter. The visible rays pass through the light guide into a light box where it is mixed with LED light to ultimately provide uniform illumination by a diffuser. The non-visible rays are absorbed by the solar photovoltaic devices to provide electrical power for the LEDs. Simulation results show that the efficiency of the hybrid sunlight/LED illumination with the renewable solar energy saving design is better than that of LED and traditional lighting systems.

Illuminating the "Boy Problem" from Children's and Teachers' Perspectives: A Pilot Study

Science.gov (United States)

Hamilton, Paula Louise; Jones, Louise

2016-01-01

The apparent educational underperformance of boys has received phenomenal attention worldwide for many years. In the UK, it has led to various government reports and policies aimed at raising boys' achievement. This small-scale qualitative-interpretive pilot study, undertaken in one urban primary school in North Wales, reports the findings from…

A Classical Delphi Study to Identify the Barriers of Pursuing Green Information and Communication Technologies

Science.gov (United States)

Gotay, Jose Antonio

2013-01-01

This qualitative, classical Delphi study served to explore the apparent lack of corporate commitment to prioritized Green Information Communication Technologies (ICTs), which could delay the economic and social benefits for maximizing the use of natural energy resources in a weak economy. The purpose of this study was to examine the leadership…

Evaluating an mHealth App for Health and Well-Being at Work: Mixed-Method Qualitative Study.

Science.gov (United States)

de Korte, Elsbeth Marieke; Wiezer, Noortje; Janssen, Joris H; Vink, Peter; Kraaij, Wessel

2018-03-28

To improve workers' health and well-being, workplace interventions have been developed, but utilization and reach are unsatisfactory, and effects are small. In recent years, new approaches such as mobile health (mHealth) apps are being developed, but the evidence base is poor. Research is needed to examine its potential and to assess when, where, and for whom mHealth is efficacious in the occupational setting. To develop interventions for workers that actually will be adopted, insight into user satisfaction and technology acceptance is necessary. For this purpose, various qualitative evaluation methods are available. The objectives of this study were to gain insight into (1) the opinions and experiences of employees and experts on drivers and barriers using an mHealth app in the working context and (2) the added value of three different qualitative methods that are available to evaluate mHealth apps in a working context: interviews with employees, focus groups with employees, and a focus group with experts. Employees of a high-tech company and experts were asked to use an mHealth app for at least 3 weeks before participating in a qualitative evaluation. Twenty-two employees participated in interviews, 15 employees participated in three focus groups, and 6 experts participated in one focus group. Two researchers independently coded, categorized, and analyzed all quotes yielded from these evaluation methods with a codebook using constructs from user satisfaction and technology acceptance theories. Interviewing employees yielded 785 quotes, focus groups with employees yielded 266 quotes, and the focus group with experts yielded 132 quotes. Overall, participants muted enthusiasm about the app. Combined results from the three evaluation methods showed drivers and barriers for technology, user characteristics, context, privacy, and autonomy. A comparison between the three qualitative methods showed that issues revealed by experts only slightly overlapped with those

Color appearance of familiar objects: effects of object shape, texture, and illumination changes.

Science.gov (United States)

Olkkonen, Maria; Hansen, Thorsten; Gegenfurtner, Karl R

2008-05-26

People perceive roughly constant surface colors despite large changes in illumination. The familiarity of colors of some natural objects might help achieve this feat through direct modulation of the objects' color appearance. Research on memory colors and color appearance has yielded controversial results and due to the employed methods has often confounded perceptual with semantic effects. We studied the effect of memory colors on color appearance by presenting photographs of fruit on a monitor under various simulated illuminations and by asking observers to make either achromatic or typical color settings without placing demands on short-term memory or semantic processing. In a control condition, we presented photographs of 3D fruit shapes without texture and 2D outline shapes. We found that (1) achromatic settings for fruit were systematically biased away from the gray point toward the opposite direction of a fruit's memory color; (2) the strength of the effect depended on the degree of naturalness of the stimuli; and (3) the effect was evident under all tested illuminations, being strongest for illuminations whose chromaticity was closest to the stimulus chromaticity. We conclude that the visual identity of an object has a measurable effect on color perception, and that this effect is robust under illuminant changes, indicating its potential significance as an additional mechanism for color constancy.

LED power consumption in joint illumination and communication system

NARCIS (Netherlands)

Deng, X.; Wu, Y.; Khalid, A.M.; Long, X.; Linnartz, J.-P.M.G.

This paper addresses the power penalty in an illumination LED caused by visible light communication (VLC). This study models the extra power consumption of the LED by taking into account the convex relation between the dissipated electrical power versus the LED current on one hand and the concave

Anti-glare LED lamps with adjustable illumination light field.

Science.gov (United States)

Chen, Yung-Sheng; Lin, Chung-Yi; Yeh, Chun-Ming; Kuo, Chie-Tong; Hsu, Chih-Wei; Wang, Hsiang-Chen

2014-03-10

We introduce a type of LED light-gauge steel frame lamp with an adjustable illumination light field that does not require a diffusion plate. Base on the Monte Carlo ray tracing method, this lamp has a good glare rating (GR) of 17.5 at 3050 lm. Compared with the traditional LED light-gauge steel frame lamp (without diffusion plate), the new type has low GR. The adjustability of the illumination light field could improve the zebra effect caused by the inadequate illumination light field of the lamp. Meanwhile, we adopt the retinal image analysis to discuss the influence of GR on vision. High GR could reflect stray light on the retinal image, which will reduce vision clarity and hasten the feeling of eye fatigue.

African-American Women's Experiences in Graduate Science, Technology, Engineering, and Mathematics Education at a Predominantly White University: A Qualitative Investigation

Science.gov (United States)

Alexander, Quentin R.; Hermann, Mary A.

2016-01-01

In this phenomenological investigation we used qualitative research methodology to examine the experiences of 8 African American women in science, technology, engineering, and mathematics (STEM) graduate programs at 1 predominantly White university (PWU) in the South. Much of the current research in this area uses quantitative methods and only…

Communicating Qualitative Research Study Designs to Research Ethics Review Boards

Science.gov (United States)

Ells, Carolyn

2011-01-01

Researchers using qualitative methodologies appear to be particularly prone to having their study designs called into question by research ethics or funding agency review committees. In this paper, the author considers the issue of communicating qualitative research study designs in the context of institutional research ethics review and offers…

Illuminance-based slat angle selection model for automated control of split blinds

Energy Technology Data Exchange (ETDEWEB)

Hu, Jia; Olbina, Svetlana [Rinker School of Building Construction, University of Florida, Gainesville, FL 32611-5703 (United States)

2011-03-15

Venetian blinds play an important role in controlling daylight in buildings. Automated blinds overcome some limitations of manual blinds; however, the existing automated systems mainly control the direct solar radiation and glare and cannot be used for controlling innovative blind systems such as split blinds. This research developed an Illuminance-based Slat Angle Selection (ISAS) model that predicts the optimum slat angles of split blinds to achieve the designed indoor illuminance. The model was constructed based on a series of multi-layer feed-forward artificial neural networks (ANNs). The illuminance values at the sensor points used to develop the ANNs were obtained by the software EnergyPlus trademark. The weather determinants (such as horizontal illuminance and sun angles) were used as the input variables for the ANNs. The illuminance level at a sensor point was the output variable for the ANNs. The ISAS model was validated by evaluating the errors in the calculation of the: 1) illuminance and 2) optimum slat angles. The validation results showed that the power of the ISAS model to predict illuminance was 94.7% while its power to calculate the optimum slat angles was 98.5%. For about 90% of time in the year, the illuminance percentage errors were less than 10%, and the percentage errors in calculating the optimum slat angles were less than 5%. This research offers a new approach for the automated control of split blinds and a guide for future research to utilize the adaptive nature of ANNs to develop a more practical and applicable blind control system. (author)

Probabilistic BPRRC: Robust Change Detection against Illumination Changes and Background Movements

Science.gov (United States)

Yokoi, Kentaro

This paper presents Probabilistic Bi-polar Radial Reach Correlation (PrBPRRC), a change detection method that is robust against illumination changes and background movements. Most of the traditional change detection methods are robust against either illumination changes or background movements; BPRRC is one of the illumination-robust change detection methods. We introduce a probabilistic background texture model into BPRRC and add the robustness against background movements including foreground invasions such as moving cars, walking people, swaying trees, and falling snow. We show the superiority of PrBPRRC in the environment with illumination changes and background movements by using three public datasets and one private dataset: ATON Highway data, Karlsruhe traffic sequence data, PETS 2007 data, and Walking-in-a-room data.

THE INFLUENCE OF BALL VELOCITY AND COURT ILLUMINATION ON REACTION TIME FOR TENNIS VOLLEY

Directory of Open Access Journals (Sweden)

Jui-hung Tu

2010-03-01

Full Text Available The he purpose of this study is to examine the effects of ball velocity, court illumination, and volley type on the reaction time (RT of a tennis athlete for a volley stroke. Eights cases with two different ball velocities (high and low, two volley types (forehand and backhand and two court illumination levels (dark and bright were studied. The 30 participating subjects consisted of 18 male and 12 female college tennis athletes (age: 24 ± 3.2 yr, with a United States Tennis Association (USTA ranking above 2.5. In order to ensure the validity of real-world correlations, the experiments were designed to simulate real competition situations. Reaction times were measured for volley strokes in response to different approaching ball velocities (high: 25.05 ± 0.37 m/s and low: 17.56 ± 0.92 m·s-1 for several volley types (forehand and backhand and court illumination levels (55649 ± 4292 lux and 363.24 ± 6.53 lux on the court. During the tests, the signals from an electromyogram sensor and a 3-axis accelerometer (± 50 g were recorded using an NI DAQ card (NI PXI-6251 and then analyzed to determine reaction time (RT, premotor reaction time (PRT, and motor reaction time (MRT through the LabVIEW system. Subsequent 3-way ANOVA analysis indicated no RT, PRT, or MRT interaction between ball velocity, volley type and illumination. The ball velocity and illumination parameters did affect RT and PRT values significantly with p < 0.05, no significant variation in MRT was observed across any implemented experimental conditions. All experimental results indicate that ball velocity and illumination levels strongly affect the value of PRT, but have no significant effect on the value of MRT, the changes in RT were dominated by PRT

a qualitative study of providers' perspectives

African Journals Online (AJOL)

Background: Glaucoma management is challenging to patients as well as to the eye care providers.The study is aimed at describing the challenges faced by providers using qualitative methods. Methods: In-depth interviews were conducted with selected Ophthalmologists and resident doctors in ophthalmology at centres ...

An Ergonomic Evaluation of the Illumination Level and the Management Plan to Improve the Working Environment of Nuclear Power Plants

International Nuclear Information System (INIS)

Shin, Kwang Hyeon; Lee, Yong Hee

2011-01-01

Illumination in the working environment is one of the crucial factors that affect worker's psychological status as well as the physiological condition according to each task. Sometimes it affects the results of worker's cognitive, perceptual work performance. In particular, illumination may become a triggering factor to human errors in visual tasks due to visual fatigue through direct influence of vision in NPPs. Illumination includes several visual conditions such as uniformity factor, light distribution, glare, SPD (Surge Protector Device), flicker, illumination system, daylight and window control, in addition to the simple physical aspects of illumination and luminance. These conditions may affect operators' visibility and disillusion level, cause stress, attention, emotion, etc. and they finally affect workers' performance and errors as a result. From the many illumination conditions mentioned above, current work environment evaluation items on illumination are mainly based only on the intensity of illumination, and there is yet no systematic way with evaluation criteria for other factors such as luminance, flickering, etc. In addition, research and development on illumination emphasizes mainly the physical characteristics of illumination, and it is insufficient for the influence studies on human error or work performance that are caused by these factors

Illumination normalization based on simplified local binary patterns for a face verification system

NARCIS (Netherlands)

Tao, Q.; Veldhuis, Raymond N.J.

2007-01-01

Illumination normalization is a very important step in face recognition. In this paper we propose a simple implementation of Local Binary Patterns, which effectively reduces the variability caused by illumination changes. In combination with a likelihood ratio classifier, this illumination

Anomalous degradation behaviors under illuminated gate bias stress in a-Si:H thin film transistor

International Nuclear Information System (INIS)

Tsai, Ming-Yen; Chang, Ting-Chang; Chu, Ann-Kuo; Hsieh, Tien-Yu; Lin, Kun-Yao; Wu, Yi-Chun; Huang, Shih-Feng; Chiang, Cheng-Lung; Chen, Po-Lin; Lai, Tzu-Chieh; Lo, Chang-Cheng; Lien, Alan

2014-01-01

This study investigates the impact of gate bias stress with and without light illumination in a-Si:H thin film transistors. It has been observed that the I–V curve shifts toward the positive direction after negative and positive gate bias stress due to interface state creation at the gate dielectric. However, this study found that threshold voltages shift negatively and that the transconductance curve maxima are anomalously degraded under illuminated positive gate bias stress. In addition, threshold voltages shift positively under illuminated negative gate bias stress. These degradation behaviors can be ascribed to charge trapping in the passivation layer dominating degradation instability and are verified by a double gate a-Si:H device. - Highlights: • There is abnormal V T shift induced by illuminated gate bias stress in a-Si:H thin film transistors. • Electron–hole pair is generated via trap-assisted photoexcitation. • Abnormal transconductance hump is induced by the leakage current from back channel. • Charge trapping in the passivation layer is likely due to the fact that a constant voltage has been applied to the top gate

A qualitative study of Ottawa university students' awareness, knowledge and perceptions of infertility, infertility risk factors and assisted reproductive technologies (ART).

Science.gov (United States)

Sabarre, Kelley-Anne; Khan, Zainab; Whitten, Amanda N; Remes, Olivia; Phillips, Karen P

2013-08-20

Awareness of infertility risk factors is an essential first step to safeguard future fertility. Whereas several studies have examined university students' awareness of female fertility and related risk factors, the topic of male infertility has not been well examined. The objective of this study was to assess young men and women's awareness, knowledge and perceptions of infertility, male and female infertility risk factors and assisted reproductive technologies (ART). Semi-structured interviews were conducted in 2008 with a multi-ethnic sample of sixteen male and twenty-three female Ottawa university students, followed by qualitative data analysis to identify major themes. Interview topics included awareness of male and female infertility risk factors, infertility diagnosis/treatments and personal options in the event of future infertility. Participants were generally familiar with infertility as a biomedical health problem, could identify sex-specific risk factors but overestimated fertility of women in their thirties and ART success rates. Reproductive health knowledge gaps and confusion of the physiological life-stage of menopause with infertility were apparent. Most participants would pursue in vitro fertilization or international adoption in the event of personal infertility. Some participants wished to use a 'natural' approach and were concerned with potential side effects of ART-related medications. The general awareness of infertility in young adults is promising and supports the potential uptake for health promotion of fertility preservation. This study underscores the continued need for comprehensive sexual and reproductive health education and promotion for adolescents and young adults.

Implementing monitoring technologies in care homes for people with dementia: A qualitative exploration using Normalization Process Theory.

Science.gov (United States)

Hall, Alex; Wilson, Christine Brown; Stanmore, Emma; Todd, Chris

2017-07-01

Ageing societies and a rising prevalence of dementia are associated with increasing demand for care home places. Monitoring technologies (e.g. bed-monitoring systems; wearable location-tracking devices) are appealing to care homes as they may enhance safety, increase resident freedom, and reduce staff burden. However, there are ethical concerns about the use of such technologies, and it is unclear how they might be implemented to deliver their full range of potential benefits. This study explored facilitators and barriers to the implementation of monitoring technologies in care homes. Embedded multiple-case study with qualitative methods. Three dementia-specialist care homes in North-West England. Purposive sample of 24 staff (including registered nurses, clinical specialists, senior managers and care workers), 9 relatives and 9 residents. 36 semi-structured interviews with staff, relatives and residents; 175h of observation; resident care record review. Data collection informed by Normalization Process Theory, which seeks to account for how novel interventions become routine practice. Data analysed using Framework Analysis. Findings are presented under three main themes: 1. Reasons for using technologies: The primary reason for using monitoring technologies was to enhance safety. This often seemed to override consideration of other potential benefits (e.g. increased resident freedom) or ethical concerns (e.g. resident privacy); 2. Ways in which technologies were implemented: Some staff, relatives and residents were not involved in discussions and decision-making, which seemed to limit understandings of the potential benefits and challenges from the technologies. Involvement of residents appeared particularly challenging. Staff highlighted the importance of training, but staff training appeared mainly informal which did not seem sufficient to ensure that staff fully understood the technologies; 3. Use of technologies in practice: Technologies generated frequent

Solicited Diary Studies of Psychotherapy in Qualitative Research - Pros and Cons

DEFF Research Database (Denmark)

Mackrill, Thomas

2008-01-01

Diary studies are scarce within the field of qualitative psychotherapy research. In this article arguments for and against the employment of solicited diaries studies in qualitative psychotherapy research are investigated. The strengths of diary studies are presented along with arguments concerning...

Portable MP3 players: innovative devices for recording qualitative interviews.

Science.gov (United States)

Fernandez, Ritin S; Griffiths, Rhonda

2007-01-01

Digital technology has provided a new way of recording qualitative interviews, surpassing the clarity, usability and storage capabilities of conventional tape recorders. Ritin Fernandez and Rhonda Griffiths examine a technological resource that pervades modern social life and which can be used effectively for digitally recording interviews for qualitative research.

Exploring the potential of technology-based mental health services for homeless youth: A qualitative study.

Science.gov (United States)

Adkins, Elizabeth C; Zalta, Alyson K; Boley, Randy A; Glover, Angela; Karnik, Niranjan S; Schueller, Stephen M

2017-05-01

Homelessness has serious consequences for youth that heighten the need for mental health services; however, these individuals face significant barriers to access. New models of intervention delivery are required to improve the dissemination of mental health interventions that tailor these services to the unique challenges faced by homeless youth. The purpose of this study was to better understand homeless youths' use of technology, mental health experiences and needs, and willingness to engage with technology-supported mental health interventions to help guide the development of future youth-facing technology-supported interventions. Five focus groups were conducted with 24 homeless youth (62.5% female) in an urban shelter. Youth were 18- to 20-years-old with current periods of homelessness ranging from 6 days to 4 years. Transcripts of these focus groups were coded to identify themes. Homeless youth reported using mobile phones frequently for communication, music, and social media. They indicated a lack of trust and a history of poor relationships with mental health providers despite recognizing the need for general support as well as help for specific mental health problems. Although initial feelings toward technology that share information with a provider were mixed, they reported an acceptance of tracking and sharing information under certain circumstances. Based on these results, we provide recommendations for the development of mental health interventions for this population focusing on technology-based treatment options. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

a qualitative study of grandparents' experiences

African Journals Online (AJOL)

Grandparents are increasingly becoming the primary carers of children orphaned by the HIV epidemic in South Africa. Traditional family roles are being reversed as aging family members take responsibility for the physical and psychosocial needs of children. This study uses qualitative research to explore the experiences of ...

Generation of realistic scene using illuminant estimation and mixed chromatic adaptation

Science.gov (United States)

Kim, Jae-Chul; Hong, Sang-Gi; Kim, Dong-Ho; Park, Jong-Hyun

2003-12-01

The algorithm of combining a real image with a virtual model was proposed to increase the reality of synthesized images. Currently, synthesizing a real image with a virtual model facilitated the surface reflection model and various geometric techniques. In the current methods, the characteristics of various illuminants in the real image are not sufficiently considered. In addition, despite the chromatic adaptation plays a vital role for accommodating different illuminants in the two media viewing conditions, it is not taken into account in the existing methods. Thus, it is hardly to get high-quality synthesized images. In this paper, we proposed the two-phase image synthesis algorithm. First, the surface reflectance of the maximum high-light region (MHR) was estimated using the three eigenvectors obtained from the principal component analysis (PCA) applied to the surface reflectances of 1269 Munsell samples. The combined spectral value, i.e., the product of surface reflectance and the spectral power distributions (SPDs) of an illuminant, of MHR was then estimated using the three eigenvectors obtained from PCA applied to the products of surface reflectances of Munsell 1269 samples and the SPDs of four CIE Standard Illuminants (A, C, D50, D65). By dividing the average combined spectral values of MHR by the average surface reflectances of MHR, we could estimate the illuminant of a real image. Second, the mixed chromatic adaptation (S-LMS) using an estimated and an external illuminants was applied to the virtual-model image. For evaluating the proposed algorithm, experiments with synthetic and real scenes were performed. It was shown that the proposed method was effective in synthesizing the real and the virtual scenes under various illuminants.

Disparity Map Generation from Illumination Variant Stereo Images Using Efficient Hierarchical Dynamic Programming

Directory of Open Access Journals (Sweden)

Viral H. Borisagar

2014-01-01

Full Text Available A novel hierarchical stereo matching algorithm is presented which gives disparity map as output from illumination variant stereo pair. Illumination difference between two stereo images can lead to undesirable output. Stereo image pair often experience illumination variations due to many factors like real and practical situation, spatially and temporally separated camera positions, environmental illumination fluctuation, and the change in the strength or position of the light sources. Window matching and dynamic programming techniques are employed for disparity map estimation. Good quality disparity map is obtained with the optimized path. Homomorphic filtering is used as a preprocessing step to lessen illumination variation between the stereo images. Anisotropic diffusion is used to refine disparity map to give high quality disparity map as a final output. The robust performance of the proposed approach is suitable for real life circumstances where there will be always illumination variation between the images. The matching is carried out in a sequence of images representing the same scene, however in different resolutions. The hierarchical approach adopted decreases the computation time of the stereo matching problem. This algorithm can be helpful in applications like robot navigation, extraction of information from aerial surveys, 3D scene reconstruction, and military and security applications. Similarity measure SAD is often sensitive to illumination variation. It produces unacceptable disparity map results for illumination variant left and right images. Experimental results show that our proposed algorithm produces quality disparity maps for both wide range of illumination variant and invariant stereo image pair.

Characteristics of qualitative studies in influential journals of general medicine: a critical review.

Science.gov (United States)

Yamazaki, Hiroshi; Slingsby, Brian Taylor; Takahashi, Miyako; Hayashi, Yoko; Sugimori, Hiroki; Nakayama, Takeo

2009-12-01

Although qualitative studies have increased since the 1990s, some reports note that relatively few influential journals published them up until 2000. This study critically reviewed the characteristics of qualitative studies published in top tier medical journals since 2000. We assessed full texts of qualitative studies published between 2000 and 2004 in the Annals of Internal Medicine, BMJ, JAMA, Lancet, and New England Journal of Medicine. We found 80 qualitative studies, of which 73 (91%) were published in BMJ. Only 10 studies (13%) combined qualitative and quantitative methods. Sixty-two studies (78%) used only one method of data collection. Interviews dominated the choice of data collection. The median sample size was 36 (range: 9-383). Thirty-three studies (41%) did not specify the type of analysis used but rather described the analytic process in detail. The rest indicated the mode of data analysis, in which the most prevalent methods were the constant comparative method (23%) and the grounded theory approach (22%). Qualitative data analysis software was used by 33 studies (41%). Among influential journals of general medicine, only BMJ consistently published an average of 15 qualitative study reports between 2000 and 2004. These findings lend insight into what qualities and characteristics make a qualitative study worthy of consideration to be published in an influential journal, primarily BMJ.