WorldWideScience

Sample records for technology provide high

  1. Selecting Security Technology Providers

    Science.gov (United States)

    Schneider, Tod

    2009-01-01

    The world of security technology holds great promise, but it is fraught with opportunities for expensive missteps and misapplications. The quality of the security technology consultants and system integrators one uses will have a direct bearing on how well his school masters this complex subject. Security technology consultants help determine…

  2. Flexible Semiconductor Technologies with Nanoholes-Provided High Areal Coverages and Their Application in Plasmonic-Enhanced Thin Film Photovoltaics.

    Science.gov (United States)

    Wang, Zhaozhao; Peng, Linfa; Lin, Zhongqin; Ni, Jun; Yi, Peiyun; Lai, Xinmin; He, Xiaolong; Lei, Zeyu

    2017-10-13

    Mechanical flexibility and advanced light management have gained great attentions in designing high performance, flexible thin film photovoltaics for the realization of building-integrated optoelectronic devices and portable energy sources. This study develops a soft thermal nanoimprint process for fabricating nanostructure decorated substrates integrated with amorphous silicon solar cells. Amorphous silicon (a-Si:H) solar cells have been constructed on nanoholes array textured polyimide (PI) substrates. It has been demonstrated that the nanostructures not only are beneficial to the mechanical flexibility improvement but also contribute to sunlight harvesting enhancement. The a-Si:H solar cells constructed on such nanopatterned substrates possess broadband-enhanced light absorption, high quantum efficiency and desirable power conversion efficiency (PCE) and still experience minimal PCE loss even bending around 180°. The PCE performance without antireflection coatings increases to 7.70% and it improves 40% compared with the planar devices. Although the advantages and feasibility of the schemes are demonstrated only in the application of a-Si:H solar cells, the ideas are able to extend to applications of other thin film photovoltaics and semiconductor devices.

  3. Using High-Technology Simulators to Prepare Anesthesia Providers Before Implementation of a New Electronic Health Record Module: A Technical Report.

    Science.gov (United States)

    Weintraub, Ari Y; Deutsch, Ellen S; Hales, Roberta L; Buchanan, Newton A; Rock, Whitney L; Rehman, Mohamed A

    2017-06-01

    Learning to use a new electronic anesthesia information management system can be challenging. Documenting anesthetic events, medication administration, and airway management in an unfamiliar system while simultaneously caring for a patient with the vigilance required for safe anesthesia can be distracting and risky. This technical report describes a vendor-agnostic approach to training using a high-technology manikin in a simulated clinical scenario. Training was feasible and valued by participants but required a combination of electronic and manual components. Further exploration may reveal simulated patient care training that provides the greatest benefit to participants as well as feedback to inform electronic health record improvements.

  4. Intentional Planning to Provide Technology to Students

    Science.gov (United States)

    Flagg-Williams, Joan B.; Rey, Janice M.

    2016-01-01

    Mobile technology plays a prominent role in teaching and learning. To address this vital component of teacher preparation, the education department of a small college provided the freshman class with iPads. iPads were selected because they are common in public schools, lightweight, portable, touch-screen controlled and have an abundance of…

  5. Use of technology to provide competitive advantage

    International Nuclear Information System (INIS)

    Clark, P. D.

    1999-01-01

    The role of technology in plotting a new paradigm is explored by means of reviewing NOVA Chemicals' technology strategy for feedstocks, petrochemicals and polymers. As part of this transformation of technology from that of a servant to a key contributor to the success of the company, the expansion (in a 50/50 joint venture with DOW/Union Carbide) of a mammoth 2.8 billion pound ethylene plant at Joffre, Alberta is 'the jewel in the crown'. This plant, with the two ethylene units already on site will make Joffre in the year 2000 the world's largest single site for the manufacture of ethylene. An 800 million pound Advanced SCLAIRTECH T M polystyrene plant, (a proprietary process for the manufacture of high performance polymers initially developed, but considered 'non-strategic' to their own needs, by DuPont and sold to NOVA Chemicals for $ 45 million in 1994), the largest single train of its kind in the world, is also under construction. Also in the early stages of construction on the site is a large linear alpha olefin plant owned by BP-Amoco to supply co-monomer to the polyethylene plant, To back up these facilities, there is a 400 MW cogeneration unit to supply power and steam. NOVA Chemicals Research and Technology Laboratory is a focused world class research facility with an annual budget of $ 37 million, combined with the active collaboration with all major Canadian universities, and targeted projects with other universities around the world , are all necessary components of creating and acquiring the technology that is required to achieve the corporate goals of the company. The high level of investment in research and technology is seen as the pathway to fundamentally change the business and create value which can be realized in the marketplace. Research and technology also help the company to advance the competitiveness of their own processes, keep the company on the cutting edge of technology, and assure its survival among the leaders of the industry

  6. Barriers and Benefits in Telemedicine Arising Between a High-Technology Hospital Service Provider and Remote Public Healthcare Units: A Qualitative Study in Brazil.

    Science.gov (United States)

    de Souza, Carlos Henrique Amaral; Morbeck, Renata Albaladejo; Steinman, Milton; Hors, Cora Pereira; Bracco, Mario Maia; Kozasa, Elisa H; Leão, Eliseth Ribeiro

    2017-06-01

    In Brazil, the Program for Institutional Development of the Unified Healthcare System (PROADI-SUS) has implemented a telemedicine service for urgent situations and emergencies. It is delivered by a high-technology (HT) hospital to 15 remote healthcare units (RUs) in 11 different Brazilian states. The aim of this study was to investigate possible barriers and benefits in telemedicine service among these units. We performed a qualitative study on the perceptions of physicians involved in telemedicine service in their role as providers and consultants. An individual, semistructured recorded interview was conducted with 28 physicians (17 HT; 11 RU) encompassing telemedicine resources and interaction among HT and RU physicians. Data analysis was performed by Discourse of Collective Subject. We identified the following barriers in the telemedicine service: (1) lack of experience in the use of technology or the quality of the internet signal; (2) the multiplicity of different telemedicine platforms; (3) the quality of the image sent to the HT hospital; (4) the misunderstanding that telemedicine is a time-consuming technology instead of a resource that may help to save lives; (5) not feeling comfortable exposing doubts to other HT colleagues; (6) problems in the management of telemedicine use in the RUs; and (7) political and legal issues. However, important benefits in telemedicine service were also described. The structural barriers should be the target of hospital managers. Development of standard remote care protocols may increase the use of telemedicine and create new work routines. Given the relationship difficulties among the RU and HT doctors during telemedicine consultations, other meetings should be organized to allow more interpersonal interactions. These meetings may also have the goal of sharing outcome indicators of their joint activity in telemedicine to stimulate and make them aware of the benefits of their interaction.

  7. Physics and high technology

    International Nuclear Information System (INIS)

    Shao Liqin; Ma Junru.

    1992-01-01

    At present, the development of high technology has opened a new chapter in world's history of science and technology. This review describes the great impact of physics on high technology in six different fields (energy technology, new materials, information technology, biotechnology, space technology, and Ocean technology). It is shown that the new concepts and new methods created in physics and the special conditions and measurements established for physics researches not only deepen human's knowledge about nature but also point out new directions for engineering and technology. The achievements in physics have been more and more applied to high technology, while the development of high technology has explored some new research areas and raised many novel, important projects for physics. Therefore, it is important for us to strengthen the research on these major problems in physics

  8. Application of Ethics for Providing Telemedicine Services and Information Technology.

    Science.gov (United States)

    Langarizadeh, Mostafa; Moghbeli, Fatemeh; Aliabadi, Ali

    2017-10-01

    technology, access to information has become simpler than the past. This has prompted hackers to seize the opportunity. This research shows that the ethical issues in telemedicine can be investigated from several aspects like technology, doctor-patient relationship, data confidentiality and security, informed consent, patient's and family's satisfaction with telemedicine services. Following ethical issues in telemedicine is a primary aspect of high quality services. In other words, if therapists abide by ethical rules, they can provide better services for patients. Attention to ethical issues in telemedicine guarantees a safer use of the services.

  9. Using Technology to Provide Differentiated Instruction for Deaf Learners

    Science.gov (United States)

    Shepherd, Carol M.; Alpert, Madelon

    2015-01-01

    Knowledge is power. Technological devices provide the new pathway to online learning and student retention. This is especially true for deaf learners, who have difficulty learning with the traditional pedagogies used in teaching. Results of studies have indicated that students using the suggested new technologies become more interested and…

  10. Model of Providing Assistive Technologies in Special Education Schools.

    Science.gov (United States)

    Lersilp, Suchitporn; Putthinoi, Supawadee; Chakpitak, Nopasit

    2015-05-14

    Most students diagnosed with disabilities in Thai special education schools received assistive technologies, but this did not guarantee the greatest benefits. The purpose of this study was to survey the provision, use and needs of assistive technologies, as well as the perspectives of key informants regarding a model of providing them in special education schools. The participants were selected by the purposive sampling method, and they comprised 120 students with visual, physical, hearing or intellectual disabilities from four special education schools in Chiang Mai, Thailand; and 24 key informants such as parents or caregivers, teachers, school principals and school therapists. The instruments consisted of an assistive technology checklist and a semi-structured interview. Results showed that a category of assistive technologies was provided for students with disabilities, with the highest being "services", followed by "media" and then "facilities". Furthermore, mostly students with physical disabilities were provided with assistive technologies, but those with visual disabilities needed it more. Finally, the model of providing assistive technologies was composed of 5 components: Collaboration; Holistic perspective; Independent management of schools; Learning systems and a production manual for users; and Development of an assistive technology center, driven by 3 major sources such as Government and Private organizations, and Schools.

  11. IPTV technology for the wireless Internet service provider (WISP

    Directory of Open Access Journals (Sweden)

    Mitchell Vásquez Bermúdez

    2018-02-01

    Full Text Available This article describes the implementation of the IPTV technology through an open source system for the wireless Internet service provider (WISP in the Cerecita site, located in the province of Guayas, Ecuador. The feasibility of implementing the IPTV technology is given through the use of the Emby Server application, in addition to the use of an operating system such as CentOS 7, which are open source and have the necessary requirements for the creation of this service. The analysis of data tra c generated on the WISP network, which will establish the advantages and disadvantages generated by the transmission of this technology, created to VOD multimedia content server that allows the video signal to be sent to users Finally, a feasibility study was carried out to analyze the advantages and disadvantages that exist in the implementation of this IPTV technology.

  12. Making Use of Language Technologies to Provide Formative Feedback

    NARCIS (Netherlands)

    Van Rosmalen, Peter; Berlanga, Adriana

    2009-01-01

    Van Rosmalen, P., & Berlanga, A. J. (2009). Making Use of Language Technologies to Provide Formative Feedback. Paper presented at the Natural Language Processing in Support of Learning Workshop held in conjunction with the International Conference on Artificial Intelligence in Education (AIED2009).

  13. Making Use of Language Technologies to Provide Formative Feedback

    NARCIS (Netherlands)

    Berlanga, Adriana; Brouns, Francis; Van Rosmalen, Peter; Rajagopal, Kamakshi; Kalz, Marco; Stoyanov, Slavi

    2009-01-01

    Berlanga, A. J., Brouns, F., Van Rosmalen, P., Rajagopal, K., Kalz, M., & Stoyanov, S. (2009). Making Use of Language Technologies to Provide Formative Feedback. In S. D. Craig & D. Dicheva (Eds.), AIED 2009 Workshops Proceedings Volume 10. Natural Language Processing in Support of Learning:

  14. EMC Corporation Provides Colleges with a Course in Storage Technologies

    Science.gov (United States)

    Van Sickle, Ed

    2008-05-01

    EMC Corporation, the world leader in data storage, created the EMC Academic Alliance Program to educate students on storage and close the education gap that exists. EMC developed a Storage Technology course to teach students about the design of storage technologies and the "big picture" of an information infrastructure. The course is "open" and focused on storage technologies, not products. College and universities use the course to teach students about a very important topic in IT: Storage. EMC collaborates with colleges and universities by providing the course, knowledge transfer sessions to faculty and program support. There is no cost to join and no cost to obtain the courses. EMC requires partners to sign an agreement for course use. Several colleges are using the course as an upper level elective and the course is taught by faculty. The alliance program has reduced faculty time to develop a storage course and time to learn the topic. Faculty is responsible for credentialing students and they supplement the course with additional materials. Students are being recruited for jobs by EMC and others, including internships. The Alliance program provides academic institutions with a way to differentiate. This paper will explain the program and the Storage Technology course.

  15. Utilising wearable sensor technology to provide effective memory cues

    OpenAIRE

    Doherty, Aiden R.; Smeaton, Alan F.

    2009-01-01

    We describe a wearable sensor technology that passively records "lifelog" images and sensor readings of a wearer's daily life. The focus of our work is not on aggregating, collecting or networking data as in the usual application of sensors in the Sensor Web, but rather on detecting events of interest to the wearer from a multi-sensor standalone device. These events of interest provide effective cues to allow people to more easily access their autobiographical memories. Early research indicat...

  16. High-Speed Sealift Technology Development Plan

    National Research Council Canada - National Science Library

    2002-01-01

    .... The purpose of the project was to define the technology investments required to enable development of the high-speed commercial and military ships needed to provide realistic future mission capabilities...

  17. Providing Assistive Technology Applications as a Service Through Cloud Computing.

    Science.gov (United States)

    Mulfari, Davide; Celesti, Antonio; Villari, Massimo; Puliafito, Antonio

    2015-01-01

    Users with disabilities interact with Personal Computers (PCs) using Assistive Technology (AT) software solutions. Such applications run on a PC that a person with a disability commonly uses. However the configuration of AT applications is not trivial at all, especially whenever the user needs to work on a PC that does not allow him/her to rely on his / her AT tools (e.g., at work, at university, in an Internet point). In this paper, we discuss how cloud computing provides a valid technological solution to enhance such a scenario.With the emergence of cloud computing, many applications are executed on top of virtual machines (VMs). Virtualization allows us to achieve a software implementation of a real computer able to execute a standard operating system and any kind of application. In this paper we propose to build personalized VMs running AT programs and settings. By using the remote desktop technology, our solution enables users to control their customized virtual desktop environment by means of an HTML5-based web interface running on any computer equipped with a browser, whenever they are.

  18. Technology Innovation Of Organic Waste Decomposition In Providing Feedstuffs

    Directory of Open Access Journals (Sweden)

    S. Prawirodigdo

    2011-06-01

    Full Text Available Previous investigations in Indonesia indicated that an inactive ovary was a chronically reproduction problem in ruminants. There was a tendency that nutrition deficiency inhibited ovulation, oestrus occurrence, and conception in ruminants. Obviously, there is a correlation between sufficient nutrient consumption and reproduction performance of such animals. Thus, application of the production/reproduction technology innovation for improving ruminant’s productivity in the villages needs to be supported by the availability of sufficient feed. Whilst, there is a competition among ruminants in fulfilling feed requirement. On the other hand, there are large amounts of organic waste of food and plantation estate industries which are potential for non-traditional feedstuffs. The examples of such organic wastes are: 4,817,630 ton dry matter (DM of cacao pod, 314,042.51 ton DM of coffee pulp and hulls, and 29,700,000 ton DM of palm frond, leaves and trunks. Unfortunately, such materials contain anti-nutritive substance. Nevertheless, technology innovation for decomposing organic waste is available and its validity has been proven to be satisfactory and appropriate. Regarding the limitation of feedstuffs, introduction of technology innovation for organic waste decomposition to provide feed for improving livestock productivity is promising to be applied.

  19. Marketing mix for consumer high technology products

    Directory of Open Access Journals (Sweden)

    Dovleac, L.

    2012-01-01

    Full Text Available This paper includes an analysis upon the variables of marketing mix for high technology products used for individual consumption. There are exposed the essential aspects related to marketing policies and strategies used by high technology companies for providing consumers the best solutions tailored to their needs. A special attention is given to the necessity for inclusion in the marketing mix of the fifth element – the assistance and informational support for customers.

  20. High performance fuel technology development

    Energy Technology Data Exchange (ETDEWEB)

    Koon, Yang Hyun; Kim, Keon Sik; Park, Jeong Yong; Yang, Yong Sik; In, Wang Kee; Kim, Hyung Kyu [KAERI, Daejeon (Korea, Republic of)

    2012-01-15

    {omicron} Development of High Plasticity and Annular Pellet - Development of strong candidates of ultra high burn-up fuel pellets for a PCI remedy - Development of fabrication technology of annular fuel pellet {omicron} Development of High Performance Cladding Materials - Irradiation test of HANA claddings in Halden research reactor and the evaluation of the in-pile performance - Development of the final candidates for the next generation cladding materials. - Development of the manufacturing technology for the dual-cooled fuel cladding tubes. {omicron} Irradiated Fuel Performance Evaluation Technology Development - Development of performance analysis code system for the dual-cooled fuel - Development of fuel performance-proving technology {omicron} Feasibility Studies on Dual-Cooled Annular Fuel Core - Analysis on the property of a reactor core with dual-cooled fuel - Feasibility evaluation on the dual-cooled fuel core {omicron} Development of Design Technology for Dual-Cooled Fuel Structure - Definition of technical issues and invention of concept for dual-cooled fuel structure - Basic design and development of main structure components for dual- cooled fuel - Basic design of a dual-cooled fuel rod.

  1. Providing geoscience information for geoexchange technology implementation in Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Grobe, M. [Alberta Geological Survey, Edmonton, AB (Canada). Earth Systems Section

    2007-07-01

    The mission of the Alberta Geological Survey (AGS) is to provide, data, information, knowledge, and advice about the geology of Alberta needed by government, industry, and the public for earth-resource stewardship and sustainable development in Alberta. This presentation discussed the provision of geoscience information for geoexchange technology implementation in Alberta. Surficial and bedrock geology influences the selection, installation cost and performance of geoexchange systems. The AGS is currently examining the feasibility of transforming geological maps to geothermal property maps for geoexchange design purposes and decision making by policy makers and industry. Shallow or ground-source geothermal energy in Alberta and the role of geoscience information were presented. The role of the AGS and its activities were outlined. The presentation also identified a project approach to two studies, notably a geoscience needs and utilities assessment as well as a pilot study in the Edmonton area. Data compilation and maps of the pilot study were presented. Last, the presentation discussed drilling, sampling and thermal testing in an area of thick drift over bedrock. It was determined that quality geoscience information is an important factor for site assessment and proper geoexchange design and decision making. The sharing data and experience for better decision making was found to be an important benefit. tabs., figs.

  2. Teacher Training and High Technology.

    Science.gov (United States)

    Peters, G. David

    1984-01-01

    The advent of high technology into the classroom raises the issue of proper computer training of both undergraduate students and the current teacher population. Teachers must learn a new terminology, acquire computer skills, and develop understanding of hardware and software availability and usefulness. (CS)

  3. GeoMel Technologies. Providing technology solutions to environmental hazardous waste problems

    International Nuclear Information System (INIS)

    2003-01-01

    ,000 metric tons of contaminated materials on three continents. AMEC, under an exclusive agreement, is further developing the technologies and marketing and implementing them globally. GeoMelt offers significant advantages for site remediation and waste treatment: - Commercially proven at large scale; - Can treat mixed organic, inorganic and radioactive contaminants simultaneously; - Extremely high waste loadings; - Mobile for on-site or off-site use and can be performed in-situ or in a batch plant; - High tolerance for debris such as concrete, scrap metal, wood and plastic; - Treated mass is highly resistant to leaching and weathering; - Permitted by the U.S. EPA for the treatment of PCBs nation wide; - Selected in Australia as an alternative to incineration; - High degree of public and regulatory acceptance; - Treatment rates of up to 100 tons per day. In addition to GeoMelt, AMEC offers a complete range of other environmental and geotechnical services in North America and abroad from 90 Earth and Environmental offices. Globally, AMEC operates in 40 countries and is a leading provider of services and engineering solutions to the world's infrastructure, manufacturing and process industries. AMEC has been ranked as the leading international design firm by Engineering News- Record magazine. Learn more about GeoMelt at www.geomelt.com. For a list of office locations, company contacts and other services refer to: www.amec.com

  4. High Technology Mass Spectrometry Laboratory

    Science.gov (United States)

    2010-08-01

    distribution unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT Preparedness for acts of chemical terrorism and warfare require detecti testing will allow...chemical terrorism and warfare require detection and response to such attacks. Appropriate chemical testing will allow for the proper diagnosis and...acrylonitrile and acrolein in human blood, and potentially to devise rapid, high throughput screening technology to enable examination of large groups of

  5. Educational Digital Technologies in Developing Countries Challenge Third Party Providers

    Science.gov (United States)

    Passey, Don; Laferrière, Thérèse; Ahmad, Manal Yazbak-Abu; Bhowmik, Miron; Gross, Diana; Price, Janet; Resta, Paul; Shonfeld, Miri

    2016-01-01

    In this conceptual paper, we consider issues and challenges of third party and governmental organisations in planning and implementing access to and uses of digital technologies for learning and teaching in developing countries. We consider failures and weaknesses in the planning and implementation processes highlighted by research in developed…

  6. Export controls on high technology

    Energy Technology Data Exchange (ETDEWEB)

    Frank, N.K.

    1987-01-01

    A overview of the Export Administration Act of 1979 and subsequent regulations and amendments focuses on how licensing requirements and restrictions against boycott affect high technology exports. The purpose of these controls is to limit the export of technology with possible military applications, as well as to advance US foreign policy and protect the economy without imposing too great a restriction on the principles of free trade. Thus, the act encompasses political, economic, and security goals. Problems of predictability arise when embargoes or other controls are imposed for political or foreign policy reasons without regard to economic impacts. Amendments have attempted to streamline the exporting process, particularly in the area of computer and software licensing.

  7. The Jet Principle: Technologies Provide Border Conditions for Global Learning

    Science.gov (United States)

    Ahamer, Gilbert

    2012-01-01

    Purpose: The purpose of this paper is to first define the "jet principle" of (e-)learning as providing dynamically suitable framework conditions for enhanced learning procedures that combine views from multiple cultures of science. Second it applies this principle to the case of the "Global Studies" curriculum, a unique…

  8. Advanced high-bandwidth optical fuzing technology

    Science.gov (United States)

    Liu, Jony J.; von der Lippe, Christian M.

    2005-10-01

    A robust and compact photonic proximity sensor is developed for optical fuze in munitions applications. The design of the optical fuze employed advanced optoelectronic technologies including high-power vertical-cavity surface-emitting lasers (VCSELs), the p-i-n or metal-semiconductor-metal (MSM) photodetectors, SiGe ASIC driver, and miniature optics. The development combines pioneering work and unique expertise at ARDEC, ARL, and Sandia National Laboratories and synergizes the key optoelectronic technologies in components and system designs. This compact sensor will replace conventional costly assemblies based on discrete lasers, photodetectors, and bulky optics and provide a new capability for direct fire applications. It will be mass manufacturable in low cost and simplicity. In addition to the specific applications for gun-fired munitions, numerous civilian uses can be realized by this proximity sensor in automotive, robotics, and aerospace applications. This technology is also applicable to robotic ladar and short-range 3-D imaging.

  9. High Frequency Electronic Packaging Technology

    Science.gov (United States)

    Herman, M.; Lowry, L.; Lee, K.; Kolawa, E.; Tulintseff, A.; Shalkhauser, K.; Whitaker, J.; Piket-May, M.

    1994-01-01

    Commercial and government communication, radar, and information systems face the challenge of cost and mass reduction via the application of advanced packaging technology. A majority of both government and industry support has been focused on low frequency digital electronics.

  10. Multimedia Bootcamp: a health sciences library provides basic training to promote faculty technology integration.

    Science.gov (United States)

    Ramsey, Ellen C

    2006-04-25

    Recent research has shown a backlash against the enthusiastic promotion of technological solutions as replacements for traditional educational content delivery. Many institutions, including the University of Virginia, have committed staff and resources to supporting state-of-the-art, showpiece educational technology projects. However, the Claude Moore Health Sciences Library has taken the approach of helping Health Sciences faculty be more comfortable using technology in incremental ways for instruction and research presentations. In July 2004, to raise awareness of self-service multimedia resources for instructional and professional development needs, the Library conducted a "Multimedia Bootcamp" for nine Health Sciences faculty and fellows. Case study. Program stewardship by a single Library faculty member contributed to the delivery of an integrated learning experience. The amount of time required to attend the sessions and complete homework was the maximum fellows had to devote to such pursuits. The benefit of introducing technology unfamiliar to most fellows allowed program instructors to start everyone at the same baseline while not appearing to pass judgment on the technology literacy skills of faculty. The combination of wrapping the program in the trappings of a fellowship and selecting fellows who could commit to a majority of scheduled sessions yielded strong commitment from participants as evidenced by high attendance and a 100% rate of assignment completion. Response rates to follow-up evaluation requests, as well as continued use of Media Studio resources and Library expertise for projects begun or conceived during Bootcamp, bode well for the long-term success of this program. An incremental approach to integrating technology with current practices in instruction and presentation provided a supportive yet energizing environment for Health Sciences faculty. Keys to this program were its faculty focus, traditional hands-on instruction, unrestricted

  11. High magnetic fields science and technology

    CERN Document Server

    Miura, Noboru

    2003-01-01

    This three-volume book provides a comprehensive review of experiments in very strong magnetic fields that can only be generated with very special magnets. The first volume is entirely devoted to the technology of laboratory magnets: permanent, superconducting, high-power water-cooled and hybrid; pulsed magnets, both nondestructive and destructive (megagauss fields). Volumes 2 and 3 contain reviews of the different areas of research where strong magnetic fields are an essential research tool. These volumes deal primarily with solid-state physics; other research areas covered are biological syst

  12. High Impact Technology Compact Combustion (HITCC) Compact Core Technologies

    Science.gov (United States)

    2016-01-01

    were combusted in a vitiated stream. The molecular weight and hydrogen -to-carbon ratios of these fuels were measured by Princeton University [17...AFRL-RQ-WP-TR-2016-0010 HIGH IMPACT TECHNOLOGY COMPACT COMBUSTION (HITCC) COMPACT CORE TECHNOLOGIES Andrew W. Caswell Combustion ...ANDREW W. CASWELL CHARLES J. CROSS, Branch Chief Program Engineer Combustion Branch Combustion Branch Turbine Engine Division Turbine

  13. TELECOMMUTING AND HRM: A CASE STUDY OF AN INFORMATION TECHNOLOGY SERVICE PROVIDER

    Directory of Open Access Journals (Sweden)

    André Fernandes Bernardino

    2012-08-01

    Full Text Available With the development in information technology resources, a way of working has been standing out: telecommuting. This manner of working from a distance may offer a competitive advantage in attracting and retaining highly skilled professionals. The purpose of the research presented in this article is to identify guidelines for the implementation and management of telecommuting, as an alternative to overcome the shortage of qualified professionals in Information Technology (IT. The results, based on a case study of a Brazilian subsidiary of a multinational organization that provides IT services, shown that telecommuting (1 contributes to attracting and retaining qualified professionals in IT, (2 should be based on trustworthy relationships, (3 has to be supported by a strategy of decentralization of both structure and organizational assets.

  14. Development of high burnup nuclear fuel technology

    International Nuclear Information System (INIS)

    Suk, Ho Chun; Kang, Young Hwan; Jung, Jin Gone; Hwang, Won; Park, Zoo Hwan; Ryu, Woo Seog; Kim, Bong Goo; Kim, Il Gone

    1987-04-01

    The objectives of the project are mainly to develope both design and manufacturing technologies for 600 MWe-CANDU-PHWR-type high burnup nuclear fuel, and secondly to build up the foundation of PWR high burnup nuclear fuel technology on the basis of KAERI technology localized upon the standard 600 MWe-CANDU- PHWR nuclear fuel. So, as in the first stage, the goal of the program in the last one year was set up mainly to establish the concept of the nuclear fuel pellet design and manufacturing. The economic incentives for high burnup nuclear fuel technology development are improvement of fuel utilization, backend costs plant operation, etc. Forming the most important incentives of fuel cycle costs reduction and improvement of power operation, etc., the development of high burnup nuclear fuel technology and also the research on the incore fuel management and safety and technologies are necessary in this country

  15. High technology revisited: definition and position

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2006-01-01

    This paper proposes a new approach to defining high technology by distinguishing two different aspects. First, complexity, which is a more or less a `static' view on high technology and is applied to both the final product as well as the production process. Second, the newness, relates to a

  16. Providing a computing environment for a high energy physics workshop

    Energy Technology Data Exchange (ETDEWEB)

    Nicholls, J.

    1991-03-01

    Although computing facilities have been provided at conferences and workshops remote from the hose institution for some years, the equipment provided has rarely been capable of providing for much more than simple editing and electronic mail over leased lines. This presentation describes the pioneering effort involved by the Computing Department/Division at Fermilab in providing a local computing facility with world-wide networking capability for the Physics at Fermilab in the 1990's workshop held in Breckenridge, Colorado, in August 1989, as well as the enhanced facilities provided for the 1990 Summer Study on High Energy Physics at Snowmass, Colorado, in June/July 1990. Issues discussed include type and sizing of the facilities, advance preparations, shipping, on-site support, as well as an evaluation of the value of the facility to the workshop participants.

  17. Providing a computing environment for a high energy physics workshop

    International Nuclear Information System (INIS)

    Nicholls, J.

    1991-03-01

    Although computing facilities have been provided at conferences and workshops remote from the hose institution for some years, the equipment provided has rarely been capable of providing for much more than simple editing and electronic mail over leased lines. This presentation describes the pioneering effort involved by the Computing Department/Division at Fermilab in providing a local computing facility with world-wide networking capability for the Physics at Fermilab in the 1990's workshop held in Breckenridge, Colorado, in August 1989, as well as the enhanced facilities provided for the 1990 Summer Study on High Energy Physics at Snowmass, Colorado, in June/July 1990. Issues discussed include type and sizing of the facilities, advance preparations, shipping, on-site support, as well as an evaluation of the value of the facility to the workshop participants

  18. Sharing risk between payer and provider by leasing health technologies: an affordable and effective reimbursement strategy for innovative technologies?

    Science.gov (United States)

    Edlin, Richard; Hall, Peter; Wallner, Klemens; McCabe, Christopher

    2014-06-01

    The challenge of implementing high-cost innovative technologies in health care systems operating under significant budgetary pressure has led to a radical shift in the health technology reimbursement landscape. New reimbursement strategies attempt to reduce the risk of making the wrong decision, that is, paying for a technology that is not good value for the health care system, while promoting the adoption of innovative technologies into clinical practice. The remaining risk, however, is not shared between the manufacturer and the health care payer at the individual purchase level; it continues to be passed from the manufacturer to the payer at the time of purchase. In this article, we propose a health technology payment strategy-technology leasing reimbursement scheme-that allows the sharing of risk between the manufacturer and the payer: the replacing of up-front payments with a stream of payments spread over the expected duration of benefit from the technology, subject to the technology delivering the claimed health benefit. Using trastuzumab (Herceptin) in early breast cancer as an exemplar technology, we show how a technology leasing reimbursement scheme not only reduces the total budgetary impact of the innovative technology but also truly shares risk between the manufacturer and the health care system, while reducing the value of further research and thus promoting the rapid adoption of innovative technologies into clinical practice. Copyright © 2014 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  19. Network Information Management: The Key To Providing High WAN Availability.

    Science.gov (United States)

    Tysdal, Craig

    1996-01-01

    Discusses problems associated with increasing corporate network complexity as a result of the proliferation of client/server applications at remote locations, and suggests the key to providing high WAN (wide area network) availability is relational databases used in an integrated management approach. (LRW)

  20. Endovascular stent grafting of thoracic aortic aneurysms: technological advancements provide an alternative to traditional surgical repair.

    Science.gov (United States)

    Jones, Lauren E Beste

    2005-01-01

    The use of endovascular stent grafts is a leading technological advancement in the treatment of thoracic aortic aneurysms, and is being trialed in the United States as an alternative to medical management and traditional surgical repair. Aortic stent grafts, initially used only for abdominal aortic aneurysms, have been used for over 10 years in Europe and are currently under United States Food and Drug Administration investigation for the treatment of chronic and acute aortic aneurysms. Diseases of the thoracic aorta are often present in high-risk individuals, and, as a result, there is a high morbidity and mortality rate associated with both medical and surgical management of these patients. The development and refinement of endovascular approaches have the potential to decrease the need for traditional surgical repair, especially in high-risk populations such as the elderly and those with multiple comorbidities. Endovascular technology for thoracic repair has only been used in Europe for the last 10 years, with no long-term outcomes available; however, preliminary research demonstrates favorable early and midterm outcomes showing that endovascular stent graft placement to exclude the dilated, dissected, or ruptured aorta is both technically feasible and safe for patients. The article highlights the historical perspective of endovascular stent grafting as well as a description of patient selection, the operative procedure, benefits, risks, and unresolved issues pertaining to the procedure. A brief review of aneurysm and dissection pathophysiology and management is provided, as well as postoperative management for acute care nurses and recommendations for clinical practice.

  1. External Service Providers to the National Security Technology Incubator: Formalization of Relationships

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-04-30

    This report documents the formalization of relationships with external service providers in the development of the National Security Technology Incubator (NSTI). The technology incubator is being developed as part of the National Security Preparedness Project (NSPP), funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This report summarizes the process in developing and formalizing relationships with those service providers and includes a sample letter of cooperation executed with each provider.

  2. High temperature vapors science and technology

    CERN Document Server

    Hastie, John

    2012-01-01

    High Temperature Vapors: Science and Technology focuses on the relationship of the basic science of high-temperature vapors to some areas of discernible practical importance in modern science and technology. The major high-temperature problem areas selected for discussion include chemical vapor transport and deposition; the vapor phase aspects of corrosion, combustion, and energy systems; and extraterrestrial high-temperature species. This book is comprised of seven chapters and begins with an introduction to the nature of the high-temperature vapor state, the scope and literature of high-temp

  3. High-Temperature Test Technology

    Science.gov (United States)

    1987-03-01

    F33615-84-C-3213 Sc. ADDRESS (City. State and ZIP Code) 10. SOURCE OF: FUNDING NOBI . AFWVAL/FIBT PROGRAM PROJECT TASK WORK UNIT Wright-Patterson AFB OH...fly at speeds in excess of Mach 20. Aerodynamic heating "rom these hypersonic speeds will pro - duce vehicle surface temperatures as high as 3000*F. In...We believe that two former suppliers, Pyro-Metrics and lunar Infrared, are no longer in business. In addition, the Hi-Shear product line is now

  4. MOOCs, High Technology, and Higher Learning

    Science.gov (United States)

    Rhoads, Robert A.

    2015-01-01

    In "MOOCs, High Technology, and Higher Learning," Robert A. Rhoads places the OpenCourseWare (OCW) movement into the larger context of a revolution in educational technology. In doing so, he seeks to bring greater balance to increasingly polarized discussions of massively open online courses (MOOCs) and show their ongoing relevance to…

  5. Silicates materials of high vacuum technology

    CERN Document Server

    Espe, Werner

    2013-01-01

    Materials of High Vacuum Technology, Volume 2: Silicates covers silicate insulators of special importance to vacuum technology. The book discusses the manufacture, composition, and physical and chemical properties of technical glasses, quartz glass, quartzware, vycor glass, ceramic materials, mica, and asbestos.

  6. Technology Leadership in Malaysia's High Performance School

    Science.gov (United States)

    Yieng, Wong Ai; Daud, Khadijah Binti

    2017-01-01

    Headmaster as leader of the school also plays a role as a technology leader. This applies to the high performance schools (HPS) headmaster as well. The HPS excel in all aspects of education. In this study, researcher is interested in examining the role of the headmaster as a technology leader through interviews with three headmasters of high…

  7. Systems Engineering Provides Successful High Temperature Steam Electrolysis Project

    Energy Technology Data Exchange (ETDEWEB)

    Charles V. Park; Emmanuel Ohene Opare, Jr.

    2011-06-01

    This paper describes two Systems Engineering Studies completed at the Idaho National Laboratory (INL) to support development of the High Temperature Stream Electrolysis (HTSE) process. HTSE produces hydrogen from water using nuclear power and was selected by the Department of Energy (DOE) for integration with the Next Generation Nuclear Plant (NGNP). The first study was a reliability, availability and maintainability (RAM) analysis to identify critical areas for technology development based on available information regarding expected component performance. An HTSE process baseline flowsheet at commercial scale was used as a basis. The NGNP project also established a process and capability to perform future RAM analyses. The analysis identified which components had the greatest impact on HTSE process availability and indicated that the HTSE process could achieve over 90% availability. The second study developed a series of life-cycle cost estimates for the various scale-ups required to demonstrate the HTSE process. Both studies were useful in identifying near- and long-term efforts necessary for successful HTSE process deployment. The size of demonstrations to support scale-up was refined, which is essential to estimate near- and long-term cost and schedule. The life-cycle funding profile, with high-level allocations, was identified as the program transitions from experiment scale R&D to engineering scale demonstration.

  8. The High Technology Industry and Education in Canada. New Technologies in Canadian Education Series. Paper 16.

    Science.gov (United States)

    Tobin, Judith

    This paper reports the results of a survey of a number of high technology companies in Canada who were asked to provide information about their relationship with the educational system, the application of their products in education, and their views on the implications for education in general of the new technology in information and…

  9. Characterization of Patient Interest in Provider-Based Consumer Health Information Technology: Survey Study.

    Science.gov (United States)

    Featherall, Joseph; Lapin, Brittany; Chaitoff, Alexander; Havele, Sonia A; Thompson, Nicolas; Katzan, Irene

    2018-04-19

    Consumer health information technology can improve patient engagement in their health care and assist in navigating the complexities of health care delivery. However, the consumer health information technology offerings of health systems are often driven by provider rather than patient perspectives and inadequately address patient needs, thus limiting their adoption by patients. Consideration given to patients as stakeholders in the development of such technologies may improve adoption, efficacy, and consumer health information technology resource allocation. The aims of this paper were to measure patient interest in different health system consumer health information technology apps and determine the influence of patient characteristics on consumer health information technology interest. Patients seen at the Cleveland Clinic Neurological Institute were electronically surveyed on their interest in using different consumer health information technology apps. A self-efficacy scale, Patient Health Questionnaire-9 depression screen, and EuroQol 5 dimensions health-related quality of life scale were also completed by patients. Logistic regression was used to determine the influence of patient characteristics on interest in consumer health information technology in the categories of self-management, education, and communication. The majority of 3852 patient respondents had an interest in all technology categories assessed in the survey. The highest interest was in apps that allow patients to ask questions of providers (3476/3852, 90.24%) and to schedule appointments (3211/3839, 83.64%). Patient interest in consumer health information technology was significantly associated with greater depression symptoms, worse quality of life, greater health self-efficacy, and smartphone ownership (Pinformation technology development and their perspectives should consistently guide development efforts. Health systems should consider focusing on consumer health information technologies

  10. Method for providing a low density high strength polyurethane foam

    Science.gov (United States)

    Whinnery, Jr., Leroy L.; Goods, Steven H.; Skala, Dawn M.; Henderson, Craig C.; Keifer, Patrick N.

    2013-06-18

    Disclosed is a method for making a polyurethane closed-cell foam material exhibiting a bulk density below 4 lbs/ft.sup.3 and high strength. The present embodiment uses the reaction product of a modified MDI and a sucrose/glycerine based polyether polyol resin wherein a small measured quantity of the polyol resin is "pre-reacted" with a larger quantity of the isocyanate in a defined ratio such that when the necessary remaining quantity of the polyol resin is added to the "pre-reacted" resin together with a tertiary amine catalyst and water as a blowing agent, the polymerization proceeds slowly enough to provide a stable foam body.

  11. Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies

    Directory of Open Access Journals (Sweden)

    Pascale Lehoux

    2017-09-01

    Full Text Available Background New technologies constitute an important cost-driver in healthcare, but the dynamics that lead to their emergence remains poorly understood from a health policy standpoint. The goal of this paper is to clarify how entrepreneurs, investors, and regulatory agencies influence the value of emerging health technologies. Methods Our 5-year qualitative research program examined the processes through which new health technologies were envisioned, financed, developed and commercialized by entrepreneurial clinical teams operating in Quebec’s (Canada publicly funded healthcare system. Results Entrepreneurs have a direct influence over a new technology’s value proposition, but investors actively transform this value. Investors support a technology that can find a market, no matter its intrinsic value for clinical practice or healthcare systems. Regulatory agencies reinforce the “double” value of a new technology —as a health intervention and as an economic commodity— and provide economic worth to the venture that is bringing the technology to market. Conclusion Policy-oriented initiatives such as early health technology assessment (HTA and coverage with evidence may provide technology developers with useful input regarding the decisions they make at an early stage. But to foster technologies that bring more value to healthcare systems, policy-makers must actively support the consideration of health policy issues in innovation policy.

  12. Assessment of Stirling Technology Has Provided Critical Data Leading Toward Flight Readiness of the Stirling Converter

    Science.gov (United States)

    Thieme, Lanny G.

    2001-01-01

    The NASA Glenn Research Center is supporting the development of a Stirling converter with the Department of Energy (DOE, Germantown, Maryland) for an advanced Stirling Radioisotope Power System (SRPS) to provide spacecraft onboard electric power for NASA space science missions. A key technology assessment completed by Glenn and DOE has led to the SRPS being identified as a high-efficiency power source for such deep space missions as the Europa Orbiter and the Solar Probe. In addition, the Stirling system is now being considered for unmanned Mars rovers, especially where mission profiles may exclude the use of photovoltaic power systems, such as exploration at high Martian latitudes or for missions of long duration. The SRPS efficiency of over 20 percent will reduce the required amount of radioisotope by more than a factor of 3 in comparison to current radioisotope thermoelectric generators. This significantly reduces radioisotope cost, radiological inventory, and system cost, and it provides efficient use of scarce radioisotope resources. In support of this technology assessment, Glenn conducted a series of independent evaluations and tests to determine the technology readiness of a 55-We Stirling converter developed by Stirling Technology Company (Kennewick, Washington) and DOE. Key areas evaluated by Glenn included: 1) Radiation tolerance of materials; 2) Random vibration testing of the Stirling converter in Glenn's Structural Dynamics Lab to simulate operation in the launch environment; 3) Electromagnetic interference and compatibility (EMI/EMC) of the converter operating in Glenn's EMI lab; Independent failure modes, effects, and criticality analysis, and life and reliability 4. Independent failure modes, effects, and criticality analysis, and life and reliability assessment; and 5) SRPS cost estimate. The data from these evaluations were presented to NASA Headquarters and the Jet Propulsion Laboratory mission office by a joint industry/Government team

  13. Estimating the Value of New Technologies That Provide More Accurate Drug Adherence Information to Providers for Their Patients with Schizophrenia.

    Science.gov (United States)

    Shafrin, Jason; Schwartz, Taylor T; Lakdawalla, Darius N; Forma, Felicia M

    2016-11-01

    Nonadherence to antipsychotic medication among patients with schizophrenia results in poor symptom management and increased health care and other costs. Despite its health impact, medication adherence remains difficult to accurately assess. New technologies offer the possibility of real-time patient monitoring data on adherence, which may in turn improve clinical decision making. However, the economic benefit of accurate patient drug adherence information (PDAI) has yet to be evaluated. To quantify how more accurate PDAI can generate value to payers by improving health care provider decision making in the treatment of patients with schizophrenia. A 3-step decision tree modeling framework was used to measure the effect of PDAI on annual costs (2016 U.S. dollars) for patients with schizophrenia who initiated therapy with an atypical antipsychotic. The first step classified patients using 3 attributes: adherence to antipsychotic medication, medication tolerance, and response to therapy conditional on medication adherence. The prevalence of each characteristic was determined from claims database analysis and literature reviews. The second step modeled the effect of PDAI on provider treatment decisions based on health care providers' survey responses to schizophrenia case vignettes. In the survey, providers were randomized to vignettes with access to PDAI and with no access. In the third step, the economic implications of alternative provider decisions were identified from published peer-reviewed studies. The simulation model calculated the total economic value of PDAI as the difference between expected annual patient total cost corresponding to provider decisions made with or without PDAI. In claims data, 75.3% of patients with schizophrenia were found to be nonadherent to their antipsychotic medications. Review of the literature revealed that 7% of patients cannot tolerate medication, and 72.9% would respond to antipsychotic medication if adherent. Survey responses by

  14. High Purity Smelting Technology for Ultra-high Strength Steels

    Directory of Open Access Journals (Sweden)

    JIANG Zhouhua

    2017-12-01

    Full Text Available Ultra-high strength steel with high tensile strength, good toughness, high specific strength, modulus and other characteristics are widely used in aviation, aerospace and national defense and other fields. Ultra-high strength steel is preferred material for aircraft and aero-engines and other aviation equipments. The application of ultra-high strength steel represents a country's highest level of steel research and production, and it is also an important symbol of the development of national science and technology and national defense industry. The development and application of high purity smelting technology for manufacture of ultra-high strength steels at domestic and overseas is briefly reviewed in the paper, and then the control ability about the impurity elements such as S, P, O and N in typical ultra-high strength steels, and the research status and development trend of non-metallic inclusions control are discussed. The progress in research work of high purity smelting technology for ultra-high strength steels carried out by the authors in recent years has been introduced, it shows that the control level of impurity elements and non-metallic inclusion has been greatly improved, and it also creates a new route for China to manufacture the ultra-high strength steel with high alloy, especially with high purity for ultra-high strength stainless steel, bearing steel and gear steel. Finally, the development direction of high purity smelting technology of ultra-high strength steel in China is pointed out.

  15. Managing quality inside a high-technology project organization

    OpenAIRE

    Jokinen, T. (Tauno)

    2004-01-01

    Abstract This action research addresses the deployment of Total Quality Management (TQM) principles in a high-technology new product development organisation. During the period of study, the organisation grew fast. High-technology product development and hypergrowth provided a unique combination of extreme conditions for the study. The existing concepts of TQM are presented as an organised map enabling strategic analysis for an implementation plan. The history of TQM dates back to the ...

  16. Progress Towards providing Heat-Shield for Extreme Entry Environment Technology (HEEET) for Venus and other New Froniters Missions

    Science.gov (United States)

    Venkatapathy, Ethiraj; Ellerby, Don; Gage, Peter

    2017-01-01

    Heat-shield for Extreme Entry Environment Technology (HEEET) has been in development since 2014 with the goal of enabling missions to Venus, Saturn and other high-speed sample return missions. It is offered as a new technology and incentivized for mission use in the New Frontiers 4 AO by NASA. The current plans are to mature the technology to TRL 6 by FY18. The HEEET Team has been working closely with multiple NF-4 proposals to Venus, Saturn and has been supporting recent Ice-Giants mission studies. This presentation will provide progress made to date and the plans for development in FY18.

  17. Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies

    Science.gov (United States)

    Lehoux, Pascale; Miller, Fiona A.; Daudelin, Geneviève; Denis, Jean-Louis

    2017-01-01

    Background: New technologies constitute an important cost-driver in healthcare, but the dynamics that lead to their emergence remains poorly understood from a health policy standpoint. The goal of this paper is to clarify how entrepreneurs, investors, and regulatory agencies influence the value of emerging health technologies. Methods: Our 5-year qualitative research program examined the processes through which new health technologies were envisioned, financed, developed and commercialized by entrepreneurial clinical teams operating in Quebec’s (Canada) publicly funded healthcare system. Results: Entrepreneurs have a direct influence over a new technology’s value proposition, but investors actively transform this value. Investors support a technology that can find a market, no matter its intrinsic value for clinical practice or healthcare systems. Regulatory agencies reinforce the "double" value of a new technology—as a health intervention and as an economic commodity—and provide economic worth to the venture that is bringing the technology to market. Conclusion: Policy-oriented initiatives such as early health technology assessment (HTA) and coverage with evidence may provide technology developers with useful input regarding the decisions they make at an early stage. But to foster technologies that bring more value to healthcare systems, policy-makers must actively support the consideration of health policy issues in innovation policy. PMID:28949463

  18. Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies.

    Science.gov (United States)

    Lehoux, Pascale; Miller, Fiona A; Daudelin, Geneviève; Denis, Jean-Louis

    2017-01-25

    New technologies constitute an important cost-driver in healthcare, but the dynamics that lead to their emergence remains poorly understood from a health policy standpoint. The goal of this paper is to clarify how entrepreneurs, investors, and regulatory agencies influence the value of emerging health technologies. Our 5-year qualitative research program examined the processes through which new health technologies were envisioned, financed, developed and commercialized by entrepreneurial clinical teams operating in Quebec's (Canada) publicly funded healthcare system. Entrepreneurs have a direct influence over a new technology's value proposition, but investors actively transform this value. Investors support a technology that can find a market, no matter its intrinsic value for clinical practice or healthcare systems. Regulatory agencies reinforce the "double" value of a new technology-as a health intervention and as an economic commodity-and provide economic worth to the venture that is bringing the technology to market. Policy-oriented initiatives such as early health technology assessment (HTA) and coverage with evidence may provide technology developers with useful input regarding the decisions they make at an early stage. But to foster technologies that bring more value to healthcare systems, policy-makers must actively support the consideration of health policy issues in innovation policy. © 2017 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

  19. Current high-level waste solidification technology

    International Nuclear Information System (INIS)

    Bonner, W.F.; Ross, W.A.

    1976-01-01

    Technology has been developed in the U.S. and abroad for solidification of high-level waste from nuclear power production. Several processes have been demonstrated with actual radioactive waste and are now being prepared for use in the commercial nuclear industry. Conversion of the waste to a glass form is favored because of its high degree of nondispersibility and safety

  20. Providing Appropriate Technology for Emerging Markets: Case Study on China’s Solar Thermal Industry

    Directory of Open Access Journals (Sweden)

    Jianghua Zhou

    2017-01-01

    Full Text Available Building on a case study of five Chinese solar thermal companies and one association, our study aims to understand how the innovator’s choices regarding the use of technology and organizational practices for new product development enable companies to design and diffuse appropriate technology in emerging markets. The study uncovers two critical factors that enhance the appropriateness of technology: redefining the identity of technology and building a local supply system. Our analysis shows that synergic innovation in both architecture and component leads to the appropriate functionalities desired by emerging markets. Moreover, modular design and the building of a local supply system enhance the process appropriateness of technology. Our study provides an empirical basis for advocating going beyond minor adaptations of existing products to creating appropriate technology for emerging markets, and extends our understandings of the upstream process of designing appropriate technology. Moreover, the emphasis on the local supply system reflects a holistic framework for shaping and delivering appropriate technology, expanding the existing research focus on the perspective of the technology itself. Our research also has managerial implications that may help firms tap into emerging markets.

  1. How Subsurface Water Technologies (SWT) can Provide Robust, Effective, and Cost-Efficient Solutions for Freshwater Management in Coastal Zones

    NARCIS (Netherlands)

    Zuurbier, K.G.; Raat, K.J.; Paalman, M.; Oosterhof, A.T.; Stuyfzand, P.J.

    2016-01-01

    Freshwater resources in coastal zones are limited while demands are high, resulting in problems like seasonal water shortage, overexploitation of freshwater aquifers, and seawater intrusion. Three subsurface water technologies (SWT) that can provide robust, effective, and cost-efficient solutions to

  2. Italian competitiveness in high technology industries

    International Nuclear Information System (INIS)

    Ferrari, S.; Palma, D.; Amendola, G.

    1993-01-01

    A sectoral analysis of 1978-1991 trends in the invention, manufacturing and marketing, in Italy, of high technology goods suggests the need for greater R ampersand D investment by government and private industry and a broadening of the number and type of industries now contributing to the strengthening of this nation's overall high technology industrial base. This is especially the case with regard to the electronics sector in view of the strategic importance of this vital industry and the strong competition being given by the newly industrialized countries located on the Pacific Rim. With reference to the European Communities common market strategies, intended as a buffer against future unified efforts by North American and Pacific Rim countries to consolidate global market share in high technology goods, recent investment trends reveal that Italy's response thus far has been slow and asymmetric

  3. The Effect of Health Information Technology on Health Care Provider Communication: A Mixed-Method Protocol.

    Science.gov (United States)

    Manojlovich, Milisa; Adler-Milstein, Julia; Harrod, Molly; Sales, Anne; Hofer, Timothy P; Saint, Sanjay; Krein, Sarah L

    2015-06-11

    Communication failures between physicians and nurses are one of the most common causes of adverse events for hospitalized patients, as well as a major root cause of all sentinel events. Communication technology (ie, the electronic medical record, computerized provider order entry, email, and pagers), which is a component of health information technology (HIT), may help reduce some communication failures but increase others because of an inadequate understanding of how communication technology is used. Increasing use of health information and communication technologies is likely to affect communication between nurses and physicians. The purpose of this study is to describe, in detail, how health information and communication technologies facilitate or hinder communication between nurses and physicians with the ultimate goal of identifying how we can optimize the use of these technologies to support effective communication. Effective communication is the process of developing shared understanding between communicators by establishing, testing, and maintaining relationships. Our theoretical model, based in communication and sociology theories, describes how health information and communication technologies affect communication through communication practices (ie, use of rich media; the location and availability of computers) and work relationships (ie, hierarchies and team stability). Therefore we seek to (1) identify the range of health information and communication technologies used in a national sample of medical-surgical acute care units, (2) describe communication practices and work relationships that may be influenced by health information and communication technologies in these same settings, and (3) explore how differences in health information and communication technologies, communication practices, and work relationships between physicians and nurses influence communication. This 4-year study uses a sequential mixed-methods design, beginning with a

  4. Strain sensing technology for high temperature applications

    Science.gov (United States)

    Williams, W. Dan

    1993-01-01

    This review discusses the status of strain sensing technology for high temperature applications. Technologies covered are those supported by NASA such as required for applications in hypersonic vehicles and engines, advanced subsonic engines, as well as material and structure development. The applications may be at temperatures of 540 C (1000 F) to temperatures in excess of 1400 C (2500 F). The most promising technologies at present are the resistance strain gage and remote sensing schemes. Resistance strain gages discussed include the BCL gage, the LaRC compensated gage, and the PdCr gage. Remote sensing schemes such as laser based speckle strain measurement, phase-shifling interferometry, and x-ray extensometry are discussed. Present status and limitations of these technologies are presented.

  5. Inspection technology for high pressure pipes

    International Nuclear Information System (INIS)

    Kim, Jae H.; Lee, Jae C.; Eum, Heung S.; Choi, Yu R.; Moon, Soon S.; Jang, Jong H.

    2000-02-01

    Various kinds of defects are likely to be occurred in the welds of high pressure pipes in nuclear power plants. Considering the recent accident of Zuruga nuclear power plant in Japan, reasonable policy is strongly requested for the high pressure pipe integrity. In this study, we developed the technologies to inspect pipe welds automatically. After development of scanning robot prototype in the first research year, we developed and implemented the algorithm of automatic tracking of the scanning robot along the weld line of the pipes. We use laser slit beam on weld area and capture the image using digital camera. Through processing of the captures image, we finally determine the weld line automatically. In addition, we investigated a new technology on micro systems for developing micro scanning robotic inspection of the pipe welds. The technology developed in this study is being transferred to the industry. (author)

  6. THE INFORMATION TECHNOLOGY AND COMMUNICATION USED BY LOGISTICS SERVICE PROVIDERS: LITERATURE REVIEW

    Directory of Open Access Journals (Sweden)

    Carolina Luisa dos Santos Vieira

    2012-10-01

    Full Text Available With the growth in the supply of logistics services, and the increase of competition, the use of information and communication technologies (ICT is now considered by logistics service providers (LSP, a source of competitive advantage. Through a literature review, this paper seeks to identify which technologies have been used by the PSL. Analyzing 47 articles on the subject, published in international journal that has the largest number of works on PSL, applications of technologies by PSL were analyzed according to a taxonomy suggested based on literature - software, hardware and networks. Among the results highlight the technologies cited by categories and greater scientific interest, such as EDI, RFID, TTS, WMS and Internet.

  7. Accelerator Technology: Ultra-High Vacuum

    CERN Document Server

    Baglin, V

    2013-01-01

    This document is part of Subvolume C 'Accelerators and Colliders' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the the Section '8.5 Ultra-High Vacuum' of the Chapter '8 Accelerator Technology' with the content: 8.5 Ultra-High Vacuum 8.5.1 Introduction 8.5.2 Vacuum Fundamentals 8.5.3 Vacuum Dynamics 8.5.4 Vacuum Engineering

  8. Reducing Warehouse Employee Errors Using Voice-Assisted Technology That Provided Immediate Feedback

    Science.gov (United States)

    Berger, Samuel M.; Ludwig, Timothy D.

    2007-01-01

    A foodservice distributor in the southeastern United States implemented a voice assisted selecting tool to reduce selector errors by providing immediate feedback when errors occurred. An AB design with a nonequivalent comparison group was used to examine the effects of the voice technology on 132 selectors whose mispicks and shorts were collected…

  9. The Clean Energy Manufacturing Analysis Center (CEMAC): Providing Analysis and Insights on Clean Technology Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Nicholi S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-28

    The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

  10. High Resolution Insights into Snow Distribution Provided by Drone Photogrammetry

    Science.gov (United States)

    Redpath, T.; Sirguey, P. J.; Cullen, N. J.; Fitzsimons, S.

    2017-12-01

    Dynamic in time and space, New Zealand's seasonal snow is largely confined to remote alpine areas, complicating ongoing in situ measurement and characterisation. Improved understanding and modeling of the seasonal snowpack requires fine scale resolution of snow distribution and spatial variability. The potential of remotely piloted aircraft system (RPAS) photogrammetry to resolve spatial and temporal variability of snow depth and water equivalent in a New Zealand alpine catchment is assessed in the Pisa Range, Central Otago. This approach yielded orthophotomosaics and digital surface models (DSM) at 0.05 and 0.15 m spatial resolution, respectively. An autumn reference DSM allowed mapping of winter (02/08/2016) and spring (10/09/2016) snow depth at 0.15 m spatial resolution, via DSM differencing. The consistency and accuracy of the RPAS-derived surface was assessed by comparison of snow-free regions of the spring and autumn DSMs, while accuracy of RPAS retrieved snow depth was assessed with 86 in situ snow probe measurements. Results show a mean vertical residual of 0.024 m between DSMs acquired in autumn and spring. This residual approximated a Laplace distribution, reflecting the influence of large outliers on the small overall bias. Propagation of errors associated with successive DSMs saw snow depth mapped with an accuracy of ± 0.09 m (95% c.l.). Comparing RPAS and in situ snow depth measurements revealed the influence of geo-location uncertainty and interactions between vegetation and the snowpack on snow depth uncertainty and bias. Semi-variogram analysis revealed that the RPAS outperformed systematic in situ measurements in resolving fine scale spatial variability. Despite limitations accompanying RPAS photogrammetry, this study demonstrates a repeatable means of accurately mapping snow depth for an entire, yet relatively small, hydrological basin ( 0.5 km2), at high resolution. Resolving snowpack features associated with re-distribution and preferential

  11. Technology Development for High Efficiency Optical Communications

    Science.gov (United States)

    Farr, William H.

    2012-01-01

    Deep space optical communications is a significantly more challenging operational domain than near Earth space optical communications, primarily due to effects resulting from the vastly increased range between transmitter and receiver. The NASA Game Changing Development Program Deep Space Optical Communications Project is developing four key technologies for the implementation of a high efficiency telecommunications system that will enable greater than 10X the data rate of a state-of-the-art deep space RF system (Ka-band) for similar transceiver mass and power burden on the spacecraft. These technologies are a low mass spacecraft disturbance isolation assembly, a flight qualified photon counting detector array, a high efficiency flight laser amplifier and a high efficiency photon counting detector array for the ground-based receiver.

  12. Japanese Projections: A Trip to Tokyo Provides a Glimpse into the Technology of Tomorrow

    Science.gov (United States)

    Thatcher, Michelle

    2005-01-01

    This article briefly describes one person's experience with the juxtaposition of ancient religion, pop culture, and high technology of Tokyo. She describes the amazing sights she saw at the Hitachi Central Research Laboratory on a tour of the company's digital projector factory and development labs.

  13. Technology solutions to support supervisory activities and also to provide information access to the society

    Science.gov (United States)

    Paladini, D.; Mello, A. B.

    2016-07-01

    Inmetro's data about the conformity of certificated products, process and services are, usually, displayed at fragmented databases of difficult access for several reasons, for instance, the lack of computational solutions which allow this kind of access to its users. A discussion about some of the technological solutions to support supervisory activities by the appropriate regulatory bodies and also to provide information access to society in general is herein presented, along with a theoretical explanation of the pros and cons of such technologies to the conclusion that a mobile platform seems to be the best tool for the requirements of Inmetro.

  14. New technological developments provide deep-sea sediment density flow insights: the Monterey Coordinated Canyon Experiment

    Science.gov (United States)

    O'Reilly, T. C.; Kieft, B.; Chaffey, M. R.; Wolfson-Schwehr, M.; Herlien, R.; Bird, L.; Klimov, D.; Paull, C. K.; Gwiazda, R.; Lundsten, E. M.; Anderson, K.; Caress, D. W.; Sumner, E. J.; Simmons, S.; Parsons, D. R.; Talling, P.; Rosenberger, K. J.; Xu, J.; Maier, K. L.; Gales, J. A.

    2017-12-01

    The Monterey Coordinated Canyon Experiment (CCE) deployed an array of instruments along the Monterey Canyon floor to characterize the structure, velocity and frequency of sediment flows. CCE utilized novel technologies developed at MBARI to capture sediment flow data in unprecedented detail. 1. The Seafloor Instrument Node (SIN) at 1850 meters depth housed 3 ADCPs at 3 different frequencies, CTD, current meter, oxygen optode, fluorometer/backscatter sensor, and logged data at 10 second intervals or faster. The SIN included an acoustic modem for communication with shore through a Wave Glider relay, and provided high-resolution measurements of three flow events during three successive deployments over 1.5 years. 2. Beachball-sized Benthic Event Detectors (BEDs) were deployed on or under the seafloor to measure the characteristics of sediment density flows. Each BED recorded data from a pressure sensor and a 3-axis accelerometer and gyro to characterize motions during transport events (e.g. tumble vs rotation). An acoustic modem capable of operating through more than a meter of sediment enabled communications with a ship or autonomous surface vehicle. Multiple BEDs were deployed at various depths in the canyon during CCE, detecting and measuring many transport events; one BED moved 9 km down canyon in 50 minutes during one event. 3. Wave Glider Hot Spot (HS), equipped with acoustic and RF modems, acted as data relay between SIN, BEDs and shore, and acoustically located BEDs after sediment density flows.. In some cases HS relayed BED motion data to shore within a few hours of the event. HS provided an acoustic console to the SIN, allowing shore-based users to check SIN health and status, perform maintenance, etc. 4. Mapping operations were conducted 4 times at the SIN site to quantify depositional and erosional patterns, utilizing a prototype ultra-high-resolution mapping system on the ROV Doc Ricketts. The system consists of a 400-kHz Reson 7125 multibeam sonar, a 3

  15. U.S. Army High Energy Laser (HEL) technology program

    Science.gov (United States)

    Lavan, Michael J.; Wachs, John J.

    2011-11-01

    The US Army is investing in Solid State Laser (SSL) technology to assess counter rocket, artillery, and mortar (C-RAM) and counter unmanned aerial vehicle (C-UAV) capabilities of solid state based HEL systems, as well as other potential applications for HELs of interest to the Army. The Army HEL program thrust areas are systematically moving the technology forward toward weaponization, including solid state laser technologies, advances in beam control technology, and conducting major demonstrations. The High Energy Laser Mobile Demonstrator (HELMD) will be a major step toward demonstrating HEL weapon capability to the soldier. The US Army will continue to pursue technologies that enable more compact systems compatible with, for example, a Stryker tactical vehicle as a crucial part of our strategy to provide a capability to the warfighter that can maneuver with the force.

  16. Morality and ethics in high technology

    International Nuclear Information System (INIS)

    Schroeter, K.U.

    2003-01-01

    The ethical debate about what is feasible culminates, for one side, in the indignant moral question whether man is allowed to do all he is able to do and, for the other side, in the very obligation to keep redefining the limits of creation, and to act accordingly. Consequently, the Young Generation, at their meeting in Gronau, Westphalia (about which we reported), discussed about ''High Technology - Responsible on Ethical and Moral Grounds?'' The paper presented to the participants by pastor Kai Uwe Schroeter reflects this dichotomy, but also takes a clear position in favor of the expansion of nuclear power. This issue of atw contains a revised version of the paper. It is published in the hope that it will furnish arguments for the philosophical and ethical debates about high technology. (orig.) [de

  17. Employment Trends in High-Technology Occupations.

    Science.gov (United States)

    1985-07-01

    22 22 22 105 32 Computer professionals Programmers 300 302 300 299 NA NA Systems analysts 221 223 221 221 NA NA Other 28 29 28 21 NA NA Total 349 553...HIGH-TECHNOLOGY 00 OCCUPATIONS APPROVED FOR PUBLIC RELEASE; PDISTRIBUTION UNLIMITED mpg NAVY PERSONNEL RESEARCH I AND DEVELOPMENT CENTER San Diego...mathematics, physical or life sciences, and computer science will be in greatest demand. Such competition may have adverse effects on the Navy’s ability to

  18. High-yield pulping effluent treatment technologies

    International Nuclear Information System (INIS)

    Su, W.X.; Hsieh, J.S.

    1993-03-01

    The objective of this report is to examine the high-yield (mechanical) pulp processes with respect to environmental issues affected by the discharge of their waste streams. Various statistics are given that support the view that high-yield pulping processes will have major growth in the US regions where pulp mills are located, and sites for projects in the development phase are indicated. Conventional and innovative effluent-treatment technologies applicable to these processes are reviewed. The different types of mechanical pulping or high-yield processes are explained, and the chemical additives are discussed. The important relationship between pulp yield and measure of BOD in the effluent is graphically presented. Effluent contaminants are identified, along with other important characteristics of the streams. Current and proposed environmental limitations specifically related to mechanical pulp production are reviewed. Conventional and innovative effluent-treatment technologies are discussed, along with their principle applications, uses, advantages, and disadvantages. Sludge management and disposal techniques become an intimate part of the treatment of waste streams. The conclusion is made that conventional technologies can successfully treat effluent streams under current waste-water discharge limitations, but these systems may not be adequate when stricter standards are imposed. At present, the most important issue in the treatment of pulp-mill waste is the management and disposal of the resultant sludge

  19. High School Child Development Courses Provide a Valuable Apprenticeship

    Science.gov (United States)

    McCombie, Sally M.

    2009-01-01

    The current media are laden with reports of the many significant problems facing today's youth. In fact, parenting has become a national topic of discussion. Parenting instruction, a responsibility that had previously rested in the home, has become part of educational curricula. Courses in child development are offered for high school students in…

  20. Technology development for high temperature logging tools

    Energy Technology Data Exchange (ETDEWEB)

    Veneruso, A.F.; Coquat, J.A.

    1979-01-01

    A set of prototype, high temperature logging tools (temperature, pressure and flow) were tested successfully to temperatures up to 275/sup 0/C in a Union geothermal well during November 1978 as part of the Geothermal Logging Instrumentation Development Program. This program is being conducted by Sandia Laboratories for the Department of Energy's Division of Geothermal Energy. The progress and plans of this industry based program to develop and apply the high temperature instrumentation technology needed to make reliable geothermal borehole measurements are described. Specifically, this program is upgrading existing sondes for improved high temperature performance, as well as applying new materials (elastomers, polymers, metals and ceramics) and developing component technology such as high temperature cables, cableheads and electronics to make borehole measurements such as formation temperature, flow rate, high resolution pressure and fracture mapping. In order to satisfy critical existing needs, the near term goal is for operation up to 275/sup 0/C and 7000 psi by the end of FY80. The long term goal is for operation up to 350/sup 0/C and 20,000 psi by the end of FY84.

  1. Development of energy-saving technologies providing comfortable microclimate conditions for mining

    OpenAIRE

    Б. П. Казаков; Л. Ю. Левин; А. В. Шалимов; А. В. Зайцев

    2017-01-01

    The paper contains analysis of natural and technogenic factors influencing properties of mine atmosphere, defining level of mining safety and probability of emergencies. Main trends in development of energy-saving technologies providing comfortable microclimate conditions are highlighted. A complex of methods and mathematical models has been developed to carry out aerologic and thermophysical calculations. Main ways of improvement for existing calculation methods of stationary and non-station...

  2. Using mobile phone technology to provide recovery support for women offenders.

    Science.gov (United States)

    Scott, Christy K; Johnson, Kimberly; Dennis, Michael L

    2013-10-01

    Mobile technology holds promise as a recovery tool for people with substance use disorders. However, some populations who may benefit the most may not have access to or experience with mobile phones. Incarcerated women represent a group at high risk for recidivism and relapse to substance abuse. Cost-effective mechanisms must be in place to support their recovery upon release. This study explores using mobile technology as a recovery management tool for women offenders residing in the community following release from jail. This study surveyed 325 minority women offenders with substance use disorders to determine whether or not they use cell phones, their comfort with texting and search features, and the social networks that they access from mobile phones. We found that 83% of survey subjects had cell phones; 30% of those were smartphones. Seventy-seven percent of the women reported access to supportive friends, and 88% had close family members they contacted regularly using mobile technology. Results indicated that most of the women were comfortable using a mobile phone, although the majority of them had prepaid minutes rather than plans, and most did currently use smartphones or have the capability to download applications or access social networks via their phones. Most women reported that they would be comfortable using a mobile phone to text, e-mail, and answer surveys. The high rate of adoption of mobile technology by women offenders makes them a promising target for recovery support delivered via mobile phone.

  3. Use of speech-to-text technology for documentation by healthcare providers.

    Science.gov (United States)

    Ajami, Sima

    2016-01-01

    Medical records are a critical component of a patient's treatment. However, documentation of patient-related information is considered a secondary activity in the provision of healthcare services, often leading to incomplete medical records and patient data of low quality. Advances in information technology (IT) in the health system and registration of information in electronic health records (EHR) using speechto- text conversion software have facilitated service delivery. This narrative review is a literature search with the help of libraries, books, conference proceedings, databases of Science Direct, PubMed, Proquest, Springer, SID (Scientific Information Database), and search engines such as Yahoo, and Google. I used the following keywords and their combinations: speech recognition, automatic report documentation, voice to text software, healthcare, information, and voice recognition. Due to lack of knowledge of other languages, I searched all texts in English or Persian with no time limits. Of a total of 70, only 42 articles were selected. Speech-to-text conversion technology offers opportunities to improve the documentation process of medical records, reduce cost and time of recording information, enhance the quality of documentation, improve the quality of services provided to patients, and support healthcare providers in legal matters. Healthcare providers should recognize the impact of this technology on service delivery.

  4. Characteristics of Adults Seeking Health Care Provider Support Facilitated by Mobile Technology: Secondary Data Analysis.

    Science.gov (United States)

    Bosak, Kelly; Park, Shin Hye

    2017-12-21

    Mobile health technology is rapidly evolving with the potential to transform health care. Self-management of health facilitated by mobile technology can maximize long-term health trajectories of adults. Little is known about the characteristics of adults seeking Web-based support from health care providers facilitated by mobile technology. This study aimed to examine the following: (1) the characteristics of adults who seek human support from health care providers for health concerns using mobile technology rather than from family members and friends or others with similar health conditions and (2) the use of mobile health technology among adults with chronic health conditions. Findings of this study were interpreted in the context of the Efficiency Model of Support. We first described characteristics of adults seeking Web-based support from health care providers. Using chi-square tests for categorical variables and t test for the continuous variable of age, we compared adults seeking Web-based and conventional support by demographics. The primary aim was analyzed using multivariate logistic regression to examine whether chronic health conditions and demographic factors (eg, sex, income, employment status, race, ethnicity, education, and age) were associated with seeking Web-based support from health care providers. The sample included adults (N=1453), the majority of whom were female 57.60% (837/1453), white 75.02% (1090/1453), and non-Hispanic 89.13% (1295/1453). The age of the participants ranged from 18 to 92 years (mean 48.6, standard deviation [SD] 16.8). The majority 76.05% (1105/1453) of participants reported college or higher level of education. A disparity was found in access to health care providers via mobile technology based on socioeconomic status. Adults with annual income of US $30,000 to US $100,000 were 1.72 times more likely to use Web-based methods to contact a health care provider, and adults with an annual income above US $100,000 were 2.41 to

  5. High-energy laser weapons: technology overview

    Science.gov (United States)

    Perram, Glen P.; Marciniak, Michael A.; Goda, Matthew

    2004-09-01

    High energy laser (HEL) weapons are ready for some of today"s most challenging military applications. For example, the Airborne Laser (ABL) program is designed to defend against Theater Ballistic Missiles in a tactical war scenario. Similarly, the Tactical High Energy Laser (THEL) program is currently testing a laser to defend against rockets and other tactical weapons. The Space Based Laser (SBL), Advanced Tactical Laser (ATL) and Large Aircraft Infrared Countermeasures (LAIRCM) programs promise even greater applications for laser weapons. This technology overview addresses both strategic and tactical roles for HEL weapons on the modern battlefield and examines current technology limited performance of weapon systems components, including various laser device types, beam control systems, atmospheric propagation, and target lethality issues. The characteristics, history, basic hardware, and fundamental performance of chemical lasers, solid state lasers and free electron lasers are summarized and compared. The elements of beam control, including the primary aperture, fast steering mirror, deformable mirrors, wavefront sensors, beacons and illuminators will be discussed with an emphasis on typical and required performance parameters. The effects of diffraction, atmospheric absorption, scattering, turbulence and thermal blooming phenomenon on irradiance at the target are described. Finally, lethality criteria and measures of weapon effectiveness are addressed. The primary purpose of the presentation is to define terminology, establish key performance parameters, and summarize technology capabilities.

  6. Providing Fast Discovery in D2D Communication with Full Duplex Technology

    DEFF Research Database (Denmark)

    Gatnau, Marta; Berardinelli, Gilberto; Mahmood, Nurul Huda

    2016-01-01

    is done according to a fixed probability. However, this configuration may be not appropriate to meet the 10 milliseconds control plane latency target defined for the next 5th generation (5G) system. In this work, we propose a distributed radio resource management framework supporting full duplex...... technology to provide D2D fast discovery. Such framework provides an algorithm to estimate the number of neighbor devices and to dynamically decide the transmission probability, for adapting to network changes and meeting the 10 milliseconds target. Finally, a signaling scheme is proposed to reduce...

  7. Integration of National Laboratory and Low-Activity Waste Pre-Treatment System Technology Service Providers - 16435

    Energy Technology Data Exchange (ETDEWEB)

    Subramanian, Karthik H.; Thien, Michael G.; Wellman, Dawn M.; Herman, Connie C.

    2017-03-08

    The National Laboratories are a critical partner and provide expertise in numerous aspects of the successful execution of the Direct-Feed Low Activity Waste Program. The National Laboratories are maturing the technologies of the Low-Activity Waste Pre-Treatment System (LAWPS) consistent with DOE Order 413.3B “Program and Project Management for the Acquisition of Capital Assets” expectations. The National Laboratories continue to mature waste forms, i.e. glass and secondary waste grout, for formulations and predictions of long-term performance as inputs to performance assessments. The working processes with the National Laboratories have been developed in procurements, communications, and reporting to support the necessary delivery-based technology support. The relationship continues to evolve from planning and technology development to support of ongoing operations and integration of multiple highly coordinated facilities.

  8. The future of the provision process for mobility assistive technology: a survey of providers.

    Science.gov (United States)

    Dicianno, Brad E; Joseph, James; Eckstein, Stacy; Zigler, Christina K; Quinby, Eleanor J; Schmeler, Mark R; Schein, Richard M; Pearlman, Jon; Cooper, Rory A

    2018-03-20

    The purpose of this study was to evaluate the opinions of providers of mobility assistive technologies to help inform a research agenda and set priorities. This survey study was anonymous and gathered opinions of individuals who participate in the process to provide wheelchairs and other assistive technologies to clients. Participants were asked to rank the importance of developing various technologies and rank items against each other in terms of order of importance. Participants were also asked to respond to several open-ended questions or statements. A total of 161 providers from 35 states within the USA consented to participation and completed the survey. This survey revealed themes of advanced wheelchair design, assistive robotics and intelligent systems, human machine interfaces and smart device applications. It also outlined priorities for researchers to provide continuing education to clients and providers. These themes will be used to develop research and development priorities. Implications for Rehabilitation • Research in advanced wheelchair design is needed to facilitate travel and environmental access with wheelchairs and to develop alternative power sources for wheelchairs.• New assistive robotics and intelligent systems are needed to help wheelchairs overcome obstacles or self-adjust, assist wheelchair navigation in the community, assist caregivers and transfers, and aid ambulation.• Innovations in human machine interfaces may help advance the control of mobility devices and robots with the brain, eye movements, facial gesture recognition or other systems.• Development of new smart devices is needed for better control of the environment, monitoring activity and promoting healthy behaviours.

  9. MODEL OF PROVIDING WITH DEVELOPMENT STRATEGY FOR INFORMATION TECHNOLOGIES IN AN ORGANIZATION

    Directory of Open Access Journals (Sweden)

    A. A. Kuzkin

    2015-03-01

    Full Text Available Subject of research. The paper presents research and instructional tools for assessment of providing with the development strategy for information technologies in an organization. Method. The corresponding assessment model is developed which takes into consideration IT-processes equilibrium according to selected efficiency factors of information technologies application. Basic results. The model peculiarity resides in applying neuro-fuzzy approximators where the conclusion is drawn upon fuzzy logic, and membership functions are adjusted through the use of neural networks. For the adequacy testing of the suggested model, due diligence result analysis has been carried out for the IT-strategy executed in the “Navigator” group of companies at the stage of implementation and support of new technologies and production methods. Data visualization with a circle diagram is applied for the comparative evaluation of the analysis results. The chosen model adequacy is proved by the agreement between predictive assessments for IT-strategy performance targets derived by means of the fuzzy cognitive model over 12 months planning horizon and the real values of these targets upon the expiry of the given planning term. Practical significance. The developed model application gives the possibility to solve the problem of sustainability assessment for the process of providing the required IT-strategy realization level based upon the fuzzy cognitive map analysis and to reveal IT-objectives changing tendencies for an organization over the stated planning interval.

  10. Provide, obtain and exchange information: the e-publishing technology information platform CARPET

    Directory of Open Access Journals (Sweden)

    Felix Schüle

    2012-11-01

    Full Text Available Scientific communication has been radically changed by electronic publishing (e-publishing technology. Today, knowledge travels the globe at enormous speed and is accessible everywhere. The success of e-publishing is the result of many projects or individual endeavours which have developed technical solutions for publishing tasks. The software is mostly released under an Open Source licence and the re-use of existing tools and services is often the most effective way for institutions looking to set up an e-publishing system. But information on e-publishing tools and services is often hard to get or tends not to get passed on. In order to fill this gap, the CARPET platform provides information on e-publishing technology and supports the sustainability of existing e-publishing projects and their solutions.

  11. Technology-Enhanced Peer Review: Benefits and Implications of Providing Multiple Reviews

    DEFF Research Database (Denmark)

    Papadopoulos, Pantelis M.; Lagkas, Thomas D.; Demetriadis, Stavros N.

    2017-01-01

    This study analyses the impact of self and peer feedback in technology-enhanced peer review settings. The impact of receiving peer comments (“receiver” perspective) is compared to that of reaching own insights by reviewing others’ work (“giver” perspective). In this study, 38 sophomore students w...... systems that aim to flexibly support more efficient peer review schemes.......This study analyses the impact of self and peer feedback in technology-enhanced peer review settings. The impact of receiving peer comments (“receiver” perspective) is compared to that of reaching own insights by reviewing others’ work (“giver” perspective). In this study, 38 sophomore students...... were randomly assigned in two conditions and engaged in peer review activity facilitated by a web-based learning environment asking them to provide multiple reviews. In the Peer Reviewed (PR) condition students both reviewed peer work and received peer comments for their own work. By contrast...

  12. Educational discourse: Information technology in high school

    OpenAIRE

    Penkov Boris Victorovich

    2015-01-01

    Educational discourse demonstrates a number of characteristics, which can be analyzed and grouped according to various parameters. The Theme of Online and Blended Learning occupies a critical domain within the educational discourse, including the language of high school. The discourse of senior high school provides sets of stylistic and genre markers for the discourse, such as terminological and professional vocabulary that defines and clarifies concepts and categories within t...

  13. Technology-Enhanced Peer Review: Benefits and Implications of Providing Multiple Reviews

    DEFF Research Database (Denmark)

    Papadopoulos, Pantelis M.; Lagkas, Thomas D.; Demetriadis, Stavros N.

    2017-01-01

    were randomly assigned in two conditions and engaged in peer review activity facilitated by a web-based learning environment asking them to provide multiple reviews. In the Peer Reviewed (PR) condition students both reviewed peer work and received peer comments for their own work. By contrast......, in the Self Reviewed (SR) condition students provided peer reviews, but did not receive any. Instead, they were asked to perform self reviewing, before proceeding to any revisions of their work. Result showed that the two groups were comparable in all aspects, suggesting that the lack of getting peer reviews......This study analyses the impact of self and peer feedback in technology-enhanced peer review settings. The impact of receiving peer comments (“receiver” perspective) is compared to that of reaching own insights by reviewing others’ work (“giver” perspective). In this study, 38 sophomore students...

  14. High-performance holographic technologies for fluid-dynamics experiments

    Science.gov (United States)

    Orlov, Sergei S.; Abarzhi, Snezhana I.; Oh, Se Baek; Barbastathis, George; Sreenivasan, Katepalli R.

    2010-01-01

    Modern technologies offer new opportunities for experimentalists in a variety of research areas of fluid dynamics. Improvements are now possible in the state-of-the-art in precision, dynamic range, reproducibility, motion-control accuracy, data-acquisition rate and information capacity. These improvements are required for understanding complex turbulent flows under realistic conditions, and for allowing unambiguous comparisons to be made with new theoretical approaches and large-scale numerical simulations. One of the new technologies is high-performance digital holography. State-of-the-art motion control, electronics and optical imaging allow for the realization of turbulent flows with very high Reynolds number (more than 107) on a relatively small laboratory scale, and quantification of their properties with high space–time resolutions and bandwidth. In-line digital holographic technology can provide complete three-dimensional mapping of the flow velocity and density fields at high data rates (over 1000 frames per second) over a relatively large spatial area with high spatial (1–10 μm) and temporal (better than a few nanoseconds) resolution, and can give accurate quantitative description of the fluid flows, including those of multi-phase and unsteady conditions. This technology can be applied in a variety of problems to study fundamental properties of flow–particle interactions, rotating flows, non-canonical boundary layers and Rayleigh–Taylor mixing. Some of these examples are discussed briefly. PMID:20211881

  15. Development of Innovative Technology to Provide Low-Cost Surface Atmospheric Observations in Data Sparse Regions

    Science.gov (United States)

    Kucera, Paul; Steinson, Martin

    2017-04-01

    Accurate and reliable real-time monitoring and dissemination of observations of surface weather conditions is critical for a variety of societal applications. Applications that provide local and regional information about temperature, precipitation, moisture, and winds, for example, are important for agriculture, water resource monitoring, health, and monitoring of hazard weather conditions. In many regions of the World, surface weather stations are sparsely located and/or of poor quality. Existing stations have often been sited incorrectly, not well-maintained, and have limited communications established at the site for real-time monitoring. The University Corporation for Atmospheric Research (UCAR)/National Center for Atmospheric Research (NCAR), with support from USAID, has started an initiative to develop and deploy low-cost weather instrumentation in sparsely observed regions of the world. The project is focused on improving weather observations for environmental monitoring and early warning alert systems on a regional to global scale. Instrumentation that has been developed use innovative new technologies such as 3D printers, Raspberry Pi computing systems, and wireless communications. The goal of the project is to make the weather station designs, software, and processing tools an open community resource. The weather stations can be built locally by agencies, through educational institutions, and residential communities as a citizen effort to augment existing networks to improve detection of natural hazards for disaster risk reduction. The presentation will provide an overview of the open source weather station technology and evaluation of sensor observations for the initial networks that have been deployed in Africa.

  16. The Users' Views on Different Types of Instructional Materials Provided in Virtual Reality Technologies

    Science.gov (United States)

    Yildirim, Gürkan

    2017-01-01

    Today, it is seen that developing technologies are tried to be used continuously in the learning environments. These technologies have rapidly been diversifying and changing. Recently, virtual reality technology has become one of the technologies that experts have often been dwelling on. The present research tries to determine users' opinions and…

  17. Lecture note on circuit technology for high energy physics experiment

    International Nuclear Information System (INIS)

    Ikeda, Hirokazu.

    1992-07-01

    This lecture gives basic ideas and practice of the circuit technology for high energy physics experiment. The program of this lecture gives access to the integrated circuit technology to be applied for a high luminosity hadron collider experiment. (author)

  18. Progress in advanced high temperature materials technology

    Science.gov (United States)

    Freche, J. C.; Ault, G. M.

    1976-01-01

    Materials for intermediate temperature applications are considered, taking into account possibilities regarding the use of prealloyed powder processing to obtain superalloys with increased strength for turbine disk applications. Materials for high temperature application are also discussed. Attention is given to oxide dispersion strengthened alloys (ODS), ceramics, directionally solidified eutectics, ODS + gamma prime alloys, and composites. A description is presented of various approaches for providing environmental protection.

  19. iRoam: Leveraging Mobile Technology to Provide Innovative Point of Need Reference Services

    Directory of Open Access Journals (Sweden)

    James MacDonald

    2011-04-01

    Full Text Available The University of Northern British Columbia’s Geoffrey R. Weller Library can boast of a healthy and stable reference service. While statistical analysis reveals that patron use of this service is on the decline, this is not unlike current trends experienced by many libraries today. The library averages a total of 6300 reference transactions per year, a significant number for a small, research-intensive university serving 3500 FTE. The unanswered question is why are the numbers dropping? One theory is that providing research and reference assistance in a traditional manner is affecting the number of transactions. Reference service is traditionally provided in a stationary manner, whereby patrons are required to visit the reference desk of their own volition. Recognizing that a stationary librarian cannot reach a stationary patron, UNBC library began an innovative roaming reference pilot project in September, 2010. Combining the power of wireless networks, tablet computing and chat services, 5 librarians provided point-of-need, face-to-face and virtual reference services during peak reference hours over the fall 2010 semester. This article outlines the project and technologies employed to make it happen (iPad, apps, instant messaging widgets and wireless networks.

  20. LHC collars - 12 million high technology gems

    CERN Multimedia

    2001-01-01

    Some 12 million steel collars will keep the LHC dipole magnet structures rigid. Their production has just begun. A huge job began last week: the high speed manufacturing of twelve million steel collars for the 1250 dipole magnets of the future Large Hadron Collider, LHC. The challenge is not only a matter of quantity: these collars are very high technology components because of the important role they play in the way the collider works. One of the main difficulties with the accelerator is that the magnetic field that keeps particles in orbit must have the same configuration and intensity in all the dipoles. But when the 8.33 tesla magnetic field is on -100.000 times the earth magnetic field - it produces a very strong force that can deform the 'soft' parts of the magnets, such as superconducting coils. The force loading one metre of dipole is almost comparable with the weight of a Boeing 747 - about 400 tonnes - so a huge deformation would occur without a mechanical component to keep the whole structure rigid...

  1. Development of Very High Temperature Reactor Technology

    International Nuclear Information System (INIS)

    Lee, Won Jae; Noh, J. M.; Kim, Y. H.

    2009-04-01

    For an efficient production of nuclear hydrogen, the VHTR (Very High Temperature Gas-cooled Reactor) of 950 .deg. C outlet temperature and the interfacing system for the hydrogen production are required. We have developed various evaluation technologies for the performance and safety of VHTR through the accomplishment of this project. First, to evaluate the performance of VHTR, a series of analyses has been performed such as core characteristics at 950 .deg. C, applicability of cooled-vessel, intermediate loop system and high temperature structural integrity. Through the analyses of major accidents such as HPCC and LPCC and the analysis of the risk/performance-informed method, VHTR safety evaluation has been also performed. In addition, various design analysis codes have been developed for a nuclear design, system loop design, system performance analysis, air-ingress accident analysis, fission product/tritium transport analysis, graphite structure seismic analysis and hydrogen explosion analysis, and they are being verified and validated through a lot of international collaborations

  2. Development of Innovative Technology to Provide Low-Cost Surface Atmospheric Observations

    Science.gov (United States)

    Kucera, Paul; Steinson, Martin

    2016-04-01

    Accurate and reliable real-time monitoring and dissemination of observations of surface weather conditions is critical for a variety of societal applications. Applications that provide local and regional information about temperature, precipitation, moisture, and winds, for example, are important for agriculture, water resource monitoring, health, and monitoring of hazard weather conditions. In many regions in Africa (and other global locations), surface weather stations are sparsely located and/or of poor quality. Existing stations have often been sited incorrectly, not well-maintained, and have limited communications established at the site for real-time monitoring. The US National Weather Service (NWS) International Activities Office (IAO) in partnership with University Corporation for Atmospheric Research (UCAR)/National Center for Atmospheric Research (NCAR) and funded by the United States Agency for International Development (USAID) Office of Foreign Disaster Assistance (OFDA) has started an initiative to develop and deploy low-cost weather instrumentation in sparsely observed regions of the world. The goal is to provide observations for environmental monitoring, and early warning alert systems that can be deployed at weather services in developing countries. Instrumentation is being designed using innovative new technologies such as 3D printers, Raspberry Pi computing systems, and wireless communications. The initial effort is focused on designing a surface network using GIS-based tools, deploying an initial network in Zambia, and providing training to Zambia Meteorological Department (ZMD) staff. The presentation will provide an overview of the project concepts, design of the low cost instrumentation, and initial experiences deploying a surface network deployment in Zambia.

  3. High-level waste management technology program plan

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, H.D.

    1995-01-01

    The purpose of this plan is to document the integrated technology program plan for the Savannah River Site (SRS) High-Level Waste (HLW) Management System. The mission of the SRS HLW System is to receive and store SRS high-level wastes in a see and environmentally sound, and to convert these wastes into forms suitable for final disposal. These final disposal forms are borosilicate glass to be sent to the Federal Repository, Saltstone grout to be disposed of on site, and treated waste water to be released to the environment via a permitted outfall. Thus, the technology development activities described herein are those activities required to enable successful accomplishment of this mission. The technology program is based on specific needs of the SRS HLW System and organized following the systems engineering level 3 functions. Technology needs for each level 3 function are listed as reference, enhancements, and alternatives. Finally, FY-95 funding, deliverables, and schedules are s in Chapter IV with details on the specific tasks that are funded in FY-95 provided in Appendix A. The information in this report represents the vision of activities as defined at the beginning of the fiscal year. Depending on emergent issues, funding changes, and other factors, programs and milestones may be adjusted during the fiscal year. The FY-95 SRS HLW technology program strongly emphasizes startup support for the Defense Waste Processing Facility and In-Tank Precipitation. Closure of technical issues associated with these operations has been given highest priority. Consequently, efforts on longer term enhancements and alternatives are receiving minimal funding. However, High-Level Waste Management is committed to participation in the national Radioactive Waste Tank Remediation Technology Focus Area. 4 refs., 5 figs., 9 tabs.

  4. High-level waste management technology program plan

    International Nuclear Information System (INIS)

    Harmon, H.D.

    1995-01-01

    The purpose of this plan is to document the integrated technology program plan for the Savannah River Site (SRS) High-Level Waste (HLW) Management System. The mission of the SRS HLW System is to receive and store SRS high-level wastes in a see and environmentally sound, and to convert these wastes into forms suitable for final disposal. These final disposal forms are borosilicate glass to be sent to the Federal Repository, Saltstone grout to be disposed of on site, and treated waste water to be released to the environment via a permitted outfall. Thus, the technology development activities described herein are those activities required to enable successful accomplishment of this mission. The technology program is based on specific needs of the SRS HLW System and organized following the systems engineering level 3 functions. Technology needs for each level 3 function are listed as reference, enhancements, and alternatives. Finally, FY-95 funding, deliverables, and schedules are s in Chapter IV with details on the specific tasks that are funded in FY-95 provided in Appendix A. The information in this report represents the vision of activities as defined at the beginning of the fiscal year. Depending on emergent issues, funding changes, and other factors, programs and milestones may be adjusted during the fiscal year. The FY-95 SRS HLW technology program strongly emphasizes startup support for the Defense Waste Processing Facility and In-Tank Precipitation. Closure of technical issues associated with these operations has been given highest priority. Consequently, efforts on longer term enhancements and alternatives are receiving minimal funding. However, High-Level Waste Management is committed to participation in the national Radioactive Waste Tank Remediation Technology Focus Area. 4 refs., 5 figs., 9 tabs

  5. A portal of educational resources: providing evidence for matching pedagogy with technology

    Directory of Open Access Journals (Sweden)

    Nicoletta Blas

    2014-05-01

    Full Text Available The TPACK (Technology, Pedagogy and Content Knowledge model presents the three types of knowledge that are necessary to implement a successful technology-based educational activity. It highlights how the intersections between TPK (Technological Pedagogical Knowledge, PCK (Pedagogical Content Knowledge and TCK (Technological Content Knowledge are not a sheer sum up of their components but new types of knowledge. This paper focuses on TPK, the intersection between technology knowledge and pedagogy knowledge – a crucial field of investigation. Actually, technology in education is not just an add-on but is literally reshaping teaching/learning paradigms. Technology modifies pedagogy and pedagogy dictates requirements to technology. In order to pursue this research, an empirical approach was taken, building a repository (back-end and a portal (front-end of about 300 real-life educational experiences run at school. Educational portals are not new, but they generally emphasise content. Instead, in our portal, technology and pedagogy take centre stage. Experiences are classified according to more than 30 categories (‘facets’ and more than 200 facet values, all revolving around the pedagogical implementation and the technology used. The portal (an innovative piece of technology supports sophisticated ‘exploratory’ sessions of use, targeted at researchers (investigating the TPK intersection, teachers (looking for inspiration in their daily jobs and decision makers (making decisions about the introduction of technology into schools.

  6. Screening and synthesis: high throughput technologies applied to parasitology.

    Science.gov (United States)

    Morgan, R E; Westwood, N J

    2004-01-01

    High throughput technologies continue to develop in response to the challenges set by the genome projects. This article discusses how the techniques of both high throughput screening (HTS) and synthesis can influence research in parasitology. Examples of the use of targeted and phenotype-based HTS using unbiased compound collections are provided. The important issue of identifying the protein target(s) of bioactive compounds is discussed from the synthetic chemist's perspective. This article concludes by reviewing recent examples of successful target identification studies in parasitology.

  7. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    OpenAIRE

    Steenhuis, H.J.; de Bruijn, E.J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of developing high technology competencies. This paper analysis the strategies of some developing countries in a particular high technology industry: the aircraft manufacturing industry. The focus is on Brazi...

  8. Space Photovoltaic Research and Technology 1986. High Efficiency, Space Environment, and Array Technology

    Science.gov (United States)

    1987-01-01

    The conference provided a forum to assess the progress made, the problems remaining, and the strategy for the future of photovoltaic research. Cell research and technology, space environmental effects, array technology and applications were discussed.

  9. Awareness, Interest, and Preferences of Primary Care Providers in Using Point-of-Care Cancer Screening Technology.

    Directory of Open Access Journals (Sweden)

    Chloe S Kim

    Full Text Available Well-developed point-of-care (POC cancer screening tools have the potential to provide better cancer care to patients in both developed and developing countries. However, new medical technology will not be adopted by medical providers unless it addresses a population's existing needs and end-users' preferences. The goals of our study were to assess primary care providers' level of awareness, interest, and preferences in using POC cancer screening technology in their practice and to provide guidelines to biomedical engineers for future POC technology development. A total of 350 primary care providers completed a one-time self-administered online survey, which took approximately 10 minutes to complete. A $50 Amazon gift card was given as an honorarium for the first 100 respondents to encourage participation. The description of POC cancer screening technology was provided in the beginning of the survey to ensure all participants had a basic understanding of what constitutes POC technology. More than half of the participants (57% stated that they heard of the term "POC technology" for the first time when they took the survey. However, almost all of the participants (97% stated they were either "very interested" (68% or "somewhat interested" (29% in using POC cancer screening technology in their practice. Demographic characteristics such as the length of being in the practice of medicine, the percentage of patients on Medicaid, and the average number of patients per day were not shown to be associated with the level of interest in using POC. These data show that there is a great interest in POC cancer screening technology utilization among this population of primary care providers and vast room for future investigations to further understand the interest and preferences in using POC cancer technology in practice. Ensuring that the benefits of new technology outweigh the costs will maximize the likelihood it will be used by medical providers and

  10. Charting the use of electronic health records and other information technologies among child health providers

    Directory of Open Access Journals (Sweden)

    Brooks Robert G

    2006-07-01

    Full Text Available Abstract Background Previous studies regarding the use of information technologies (IT specifically among pediatricians and other physicians who treat children are lacking. As such, the objective of this study is to examine the use of electronic health record (EHR systems and other IT applications among pediatricians and other child health providers (CHPs in Florida. Methods We focus on pediatricians and other CHPs who responded to a state-wide physician survey of IT use. CHPs included general pediatricians, pediatric sub-specialists, and family physicians who self-reported a practice composition of at least 20% children. We compared general pediatricians to other CHPs and all CHPs (including pediatricians to other physicians with respect to computer and internet availability, and to the use of personal digital assistants and EHRs. Those with an EHR were also compared regarding the availability of key functions available in their system. Statistical analyses included chi-square analysis and logistic regression models which controlled for numerous factors. Results A total of 4,203 surveys (28.2% response including 1,021 CHPs, were returned. General pediatricians (13.7% were significantly less likely to be using an EHR than both CHP family physicians (26.1% and pediatric sub-specialists (29.6%; p Conclusion Physicians caring for children, and especially pediatricians, in Florida, are significantly slower than other doctors to adopt EHRs, and important electronic patient safety functionalities, into their office practices.

  11. Impact of video technology on efficiency of pharmacist-provided anticoagulation counseling and patient comprehension.

    Science.gov (United States)

    Moore, Sarah J; Blair, Elizabeth A; Steeb, David R; Reed, Brent N; Hull, J Heyward; Rodgers, Jo Ellen

    2015-06-01

    Discharge anticoagulation counseling is important for ensuring patient comprehension and optimizing clinical outcomes. As pharmacy resources become increasingly limited, the impact of informational videos on the counseling process becomes more relevant. To evaluate differences in pharmacist time spent counseling and patient comprehension (measured by the Oral Anticoagulation Knowledge [OAK] test) between informational videos and traditional face-to-face (oral) counseling. This prospective, open, parallel-group study at an academic medical center randomized 40 individuals-17 warfarin-naïve ("New Start") and 23 with prior warfarin use ("Restart")-to receive warfarin discharge education by video or face-to-face counseling. "Teach-back" questions were used in both groups. Although overall pharmacist time was reduced in the video counseling group (P counseling method (P = 0.012) suggests the difference between counseling methods was smaller in New Start participants. Following adjustment, mean total time was reduced 8.71 (95% CI = 5.15-12.26) minutes (adjusted P counseling. Postcounseling OAK test scores did not differ. Age, gender, socioeconomic status, and years of education were not predictive of total time or OAK test score. Use of informational videos coupled with teach-back questions significantly reduced pharmacist time spent on anticoagulation counseling without compromising short-term patient comprehension, primarily in patients with prior warfarin use. Study results demonstrate that video technology provides an efficient method of anticoagulation counseling while achieving similar comprehension. © The Author(s) 2015.

  12. Legal and institutional implications of providing financial incentives to encourage the development of solar technologies

    Energy Technology Data Exchange (ETDEWEB)

    Hyatt, R. J.

    1979-07-01

    The legal basis to provide financial incentives is found in the enumerated powers of the Constitution for the exercise of federal authority, the police and tax powers for the exercise of state authority, and state delegated powers for the exercise of local authority. These powers are limited by the federal and state constitutions, and the scope of delegated authority. The major types of financial incentives are tax incentives, including income tax deductions and credits, accelerated depreciation allowances, tax-exempt bonds, and reduction in property and sales taxes; loan incentives, including low interest loans, government guaranteed and insured loans, and elimination of statutory and secondary market constraints; and government transfer incentives, including grants in aid from all levels of government. Other incentives that will indirectly affect the financing and availability of solar energy technologies include eliminating or reducing financial incentives benefiting competitive energy sources, government action to insure the operation of solar energy equipment, government-sponsored education, research, and development programs, government demonstration and procurement programs, and placing priority on rapid passage of solar energy legislation dealing with financial incentives. In most cases, a financial incentives program constituting one or more of these incentives will probably not confront any major, unique, legal or institutional impediments. The minor impediments that do exist can usually be eliminated by preventive legislation.

  13. Systems Factorial Technology provides new insights on the other-race effect.

    Science.gov (United States)

    Yang, Cheng-Ta; Fifić, Mario; Chang, Ting-Yun; Little, Daniel R

    2017-05-24

    The other-race effect refers to the difficulty of discriminating between faces from ethnic and racial groups other than one's own. This effect may be caused by a slow, feature-by-feature, analytic process, whereas the discrimination of own-race faces occurs faster and more holistically. However, this distinction has received inconsistent support. To provide a critical test, we employed Systems Factorial Technology (Townsend & Nozawa in Journal of Mathematical Psychology, 39, 321-359, 1995), which is a powerful tool for analyzing the organization of mental networks underlying perceptual processes. We compared Taiwanese participants' face discriminations of both own-race (Taiwanese woman) and other-race (Caucasian woman) faces according to the faces' nose-to-mouth separation and eye-to-eye separation. We found evidence for weak holistic processing (parallel processing) coupled with the strong analytic property of a self-terminating stopping rule for own-race faces, in contrast to strong analytic processing (serial self-terminating processing) for other-race faces, supporting the holistic/analytic hypothesis.

  14. Novel High Pressure Pump-on-a-Chip Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc proposes to develop a novel high pressure "pump-on-a-chip" and "valve-on-a-chip" microfluidic technology for NASA planetary science...

  15. High stakes and high emotions: providing safe care in Canadian emergency departments

    Directory of Open Access Journals (Sweden)

    Ali S

    2017-01-01

    Full Text Available Samina Ali,1,2 Denise Thomson,3 Timothy A D Graham,4 Sean E Rickard,3 Antonia S Stang5 1Women and Children’s Health Research Institute, 2Department of Pediatrics, 3Cochrane Child Health Field, Department of Pediatrics, University of Alberta, Edmonton, 4Department of Emergency Medicine, 5Section of Emergency Medicine, Department of Pediatrics, University of Calgary, Calgary, AB, Canada Background: The high-paced, unpredictable environment of the emergency department (ED contributes to errors in patient safety. The ED setting becomes even more challenging when dealing with critically ill patients, particularly with children, where variations in size, weight, and form present practical difficulties in many aspects of care. In this commentary, we will explore the impact of the health care providers’ emotional reactions while caring for critically ill patients, and how this can be interpreted and addressed as a patient safety issue. Discussion: ED health care providers encounter high-stakes, high-stress clinical scenarios, such as pediatric cardiac arrest or resuscitation. This health care providers’ stress, and at times, distress, and its potential contribution to medical error, is underrepresented in the current medical literature. Most patient safety research is limited to error reporting systems, especially medication-related ones, an approach that ignores the effects of health care provider stress as a source of error, and limits our ability to learn from the event. Ways to mitigate this stress and avoid this type of patient safety concern might include simulation training for rare, high-acuity events, use of pre-determined clinical order sets, and post-event debriefing. Conclusion: While there are physiologic and anatomic differences that contribute to patient safety, we believe that they are insufficient to explain the need to address critical life-threatening event-related patient safety issues for both adults and, especially, children

  16. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of

  17. A Correlational Study of the Technology Acceptance Model and Georgia Behavioral Healthcare Provider Telemedicine Adoption

    Science.gov (United States)

    Yallah, Ali

    2014-01-01

    The implementation of Telemedicine in behavioral health centers can be expensive if proactive steps were not taken to minimize user perceptions towards the new technology. Despite the significant capital investments on new Telemedicine, no consensus identified and explained what factors determined the acceptance, or rejection, of the technology.…

  18. Technology Education in Preschool: Providing Opportunities for Children to Use Artifacts and to Create

    Science.gov (United States)

    Sundqvist, Pernilla; Nilsson, Tor

    2018-01-01

    In recent years, technology has been emphasized as an important area in early childhood curricula; however, in many countries preschool does not have the tradition of teaching specific subjects, and research shows that many preschool staff members are unsure about what teaching technology should include and how it should be taught. Therefore, with…

  19. 77 FR 1708 - Cooperative Research and Development Agreement: Technology To Provide Wireless Precise Time...

    Science.gov (United States)

    2012-01-11

    ... ``Actions'' column. If you do not have access to the Internet, you may view the docket online by visiting... technology or services. Since the goal of this CRADA is to identify and investigate the advantages, disadvantages, performance, costs, and other issues associated with using alternative wireless time technology...

  20. Science Notebooks for the 21st Century. Going Digital Provides Opportunities to Learn "with" Technology Rather than "from" Technology

    Science.gov (United States)

    Fulton, Lori; Paek, Seungoh; Taoka, Mari

    2017-01-01

    Students of today are digital natives who for the most part come to school with experiences that may surpass those of their teachers. They use tablet computers and other devices in their personal lives and are eager to use them in the classroom. For teachers, this means they must integrate technology in ways that allow their students to learn with…

  1. Development of energy-saving technologies providing comfortable microclimate conditions for mining

    Directory of Open Access Journals (Sweden)

    Б. П. Казаков

    2017-03-01

    Full Text Available The paper contains analysis of natural and technogenic factors influencing properties of mine atmosphere, defining level of mining safety and probability of emergencies. Main trends in development of energy-saving technologies providing comfortable microclimate conditions are highlighted. A complex of methods and mathematical models has been developed to carry out aerologic and thermophysical calculations. Main ways of improvement for existing calculation methods of stationary and non-stationary air distribution have been defined: use of ejection draught sources to organize recirculation ventilation; accounting of depression losses at working intersections; inertance impact of  air streams and mined-out spaces for modeling transitory emergency scenarios. Based on the calculation algorithm of airflow rate distribution in the mine network, processing method has been developed for the results of air-depressive surveys under conditions of data shortage. Processes of dust transfer have been modeled in view of its coagulation and settlement, as well as interaction with water drops in case of wet dust prevention. A method to calculate intensity of water evaporation and condensation has been suggested, which allows to forecast time, duration and quantity of precipitation and its migration inside the mine during winter season. Solving the problem of heat exchange between mine airflow and timbering of the ventilation shaft in a conjugation formulation permits to estimate depression value of natural draught and conditions of convective balance between air streams. Normalization of microclimatic parameters for mine atmosphere is forecasted for the use of heat-exchange units either heating or cooling and dehumidifying ventilation air. Algorithms are presented that permit to minimize ventilation energy demands at the stages of mine design and exploitation.

  2. High-Altitude Platforms - Present Situation and Technology Trends

    Directory of Open Access Journals (Sweden)

    Flavio Araripe D'Oliveira

    2016-07-01

    Full Text Available High-altitude platforms (HAPs are aircraft, usually unmanned airships or airplanes positioned above 20 km, in the stratosphere, in order to compose a telecommunications network or perform remote sensing. In the 1990 and 2000 decades, several projects were launched, but very few had continued. In 2014, 2 major Internet companies (Google and Facebook announced investments in new HAP projects to provide Internet access in regions without communication infrastructure (terrestrial or satellite, bringing back attention to the development of HAP. This article aims to survey the history of HAPs, the current state-of-the-art (April 2016, technology trends and challenges. The main focus of this review will be on technologies directly related to the aerial platform, inserted in the aeronautical engineering field of knowledge, not detailing aspects of the telecommunications area.

  3. Ethics of the allocation of highly advanced medical technologies.

    Science.gov (United States)

    Sass, H M

    1998-03-01

    The disproportionate distribution of financial, educational, social, and medical resources between some rich countries of the northern hemisphere and less fortunate societies creates a moral challenge of global dimension. The development of new forms of highly advanced medical technologies, including neoorgans and xenografts, as well as the promotion of health literacy and predictive and preventive medical services might reduce some problems in allocational justice. Most governments and the World Health Organization (WHO) reject financial and other rewards for living organ donors thus indirectly contributing to the development of black markets. A societal gratuity model supporting and safeguarding a highly regulated market between providers and recipients of organs might provide for better protection of those who provide organs not solely based on altruistic reasons. The moral assessment of global issues in allocation and justice in the distribution of medical technologies must be increased and will have to be based on the principles of self determination and responsibility, solidarity and subsidiarity, and respect for individual values and cultural traditions.

  4. The Relationship between Environmental Turbulence, Management Support, Organizational Collaboration, Information Technology Solution Realization, and Process Performance, in Healthcare Provider Organizations

    Science.gov (United States)

    Muglia, Victor O.

    2010-01-01

    The Problem: The purpose of this study was to investigate relationships between environmental turbulence, management support, organizational collaboration, information technology solution realization, and process performance in healthcare provider organizations. Method: A descriptive/correlational study of Hospital medical services process…

  5. The Science and Technology Case for High-Field Fusion

    Science.gov (United States)

    Whyte, D.

    2017-10-01

    This review will focus on the origin, development and new opportunities of a strategy for fusion energy based on the high-field approach. In this approach confinement devices are designed at the maximum possible value of vacuum magnetic field strength, B. The integrated electrical, mechanical and cooling engineering challenges of high-field on coil (Bcoil) , large-bore electromagnets are examined for both copper and superconductor materials. These engineering challenges are confronted because of the profound science advantages provided by high-B, which are derived and reviewed: high fusion power density, B4, in compact devices, thermonuclear plasmas with significant stability margin, and, in tokamaks, access to higher plasma density. Two distinct high-field strategies emerged in the 1980's. The first was compact, cryogenically-cooled copper devices (BPX, IGNITOR, FIRE) with Bcoil>20 T, while the second was a large-volume, Nb3Sn superconductor device with Bcoil Copper Oxide (REBCO) superconductor-based devices with Bcoil >20 T; a strategy that essentially combines the best components of the two previous strategies. Recent activities examining the technology and science implications of this new strategy are reviewed. On the technology side, REBCO superconductors have now been used to produce Bcoil>40 T in small-bore electromagnets, enabled by rapid progress in manufactured REBCO conductor quality, coil modularity and flexible operating temperature range. Specific tokamak designs, over a range of aspect ratios, have been developed to take scientific advantage of these features in various ways, and will be described.

  6. PTC test bed upgrades to provide ACSES testing support capabilities at transportation technology center.

    Science.gov (United States)

    2015-06-01

    FRA Task Order 314 upgraded the Positive Train Control (PTC) Test Bed at the Transportation Technology Center to support : testing of PTC systems, components, and related equipment associated with the Advanced Civil Speed Enforcement System : (ACSES)...

  7. Beyond High-Fidelity Simulation: Emerging Technologies in Leadership Development.

    Science.gov (United States)

    Bleich, Michael R; Jackson, Christina; Werner, Stacy H; Hines, Diana; Stuart, Nancy; Nelson, Alison

    2018-03-01

    Technology offers educators active learning and new teaching strategies. Five lower cost and scalable technology applications are presented as alternative or complement to high-fidelity simulation. Professional nurse educators should adopt technology when teaching and interact with vendors to generate real-world applications that advance development. J Contin Educ Nurs. 2018;49(3):105-108. Copyright 2018, SLACK Incorporated.

  8. Modern energy efficient technologies of high-rise construction

    Science.gov (United States)

    Lukmanova, Inessa; Golov, Roman

    2018-03-01

    The paper analyzes modern energy-efficient technologies, both being applied, and only introduced into the application in the construction of high-rise residential buildings. All technologies are systematized by the authors as part of a unified model of "Arrows of Energy-Efficient Technologies", which imply performing energy-saving measures in the design, construction and operation of buildings.

  9. Low carbon technologies as providers of operational flexibility in future power systems

    International Nuclear Information System (INIS)

    Pavić, Ivan; Capuder, Tomislav; Kuzle, Igor

    2016-01-01

    Highlights: • Mixed integer linear programming model for provision of multiple services from EV. • EV energy and reserve services provision effects on power system operation. • Impacts of conventional unit’s decommission on system’s operation and flexibility. • Assessment of power system’s flexibility under different wind generation polices. - Abstract: The paper presents a unit commitment model, based on mixed integer linear programming, capable of assessing the impact of electric vehicles (EV) on provision of ancillary services in power systems with high share of renewable energy sources (RES). The analyses show how role of different conventional units changes with integration of variable and uncertain RES and how introducing a flexible sources on the demand side, in this case EV, impact the traditional provision of spinning/contingency reserve services. In addition, technical constraints of conventional units, such as nuclear, gas or coal, limit the inherit flexibility of the system which results in curtailing clean renewable sources and inefficient operation. Following on that, sensitivity analyses of operational cost and wind curtailment shows which techno-economic constraints impact the flexibility of the high RES systems the most and how integration of more flexible units or decommission of conventional nuclear, coal and gas driven power plants would impact the system’s operation. Finally, two different wind generation polices (wind penalization and wind turbines as reserve providers) have been analysed in terms of operational flexibility through different stages of conventional unit’s decommission and compared with the same analyses when EV were used as reserve providers.

  10. New technology for carbon dioxide at high pressure

    International Nuclear Information System (INIS)

    Hassina, Bazaze; Raouf, Zehioua; Menial, A. H.

    2006-01-01

    Carbon dioxide has long been the nemesis of environmentalists because of its role in global warming, but under just the right conditions-namely, high pressure and high temperature its one of nature's best and most environmentally benign solvents. Decaf-coffee lovers, for instance, benefit from its ability to remove caffeine from coffee beans.During the last few years, carbon dioxide has also made inroads in the dry-cleaning industry, providing a safe cleaning alternative to the chemical perchloroethylene. But it's on the high-tech front that carbon dioxide may make its biggest impact. T here are huge opportunities. Scientists have known for more than a century that at 75 times atmospheric pressure and 31 degree centigrade, carbon dioxide goes into and odd state that chemists called s upercritical . What's interesting to industry is that supercritical carbon dioxide may be an enabling technology for going to smaller dimensions.(Author)

  11. Green technology foresight of high technology: a social shaping of technology approach to the analysis of hopes and hypes

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Jørgensen, Ulrik

    2009-01-01

    High tech visions play an important part in public technology policy and are often promoted through technology foresights. The article presents and analyses results from a green technology foresight of nano-, bio- and information- and communication technologies initiated by the Danish Environmental...... Protection Agency with the purpose of acquiring knowledge about the environmental potentials and risks related to the three areas of technology. The foresight was organized with a social shaping of technology (SST) approach to the field in order to cater for the complex relationship between societal demands......, technology options, innovation dynamics and environmental impacts. The approach involved studying actor-networks, laboratory programs and technology trajectories as well as deconstructing different stakeholders’ high tech visions. The identified environmental potentials and risks related to the three areas...

  12. Innovative and basic researches for high temperature technologies at HTTR

    International Nuclear Information System (INIS)

    Shiozawa, Shusaku

    1995-01-01

    The HTTR is the first HTGR which is under construction at JAERI. The objectives of the HTTR are to establish basic technologies for HTGRs, to upgrade technologies for HTGRs and to conduct innovative and basic researches for high temperature technologies. The first two are concerned with HTGR developments. The last one is not necessarily for HTGR developments, but for future innovative researches which are expected to be applied to various technologies. (author)

  13. State investments in high-technology job growth.

    Science.gov (United States)

    Leicht, Kevin T; Jenkins, J Craig

    2017-07-01

    Since the early 1970's state and local governments have launched an array of economic development programs designed to promote high-technology development. The question our analysis addresses is whether these programs promote long-term high-technology employment growth net of state location and agglomeration advantages. Proponents talk about an infrastructure strategy that promotes investment in public research and specialized infrastructure to attract and grow new high technology industries in specific locations, and a more decentralized entrepreneurial strategy that reinforces local agglomeration capacities by investing in new enterprises and products, promoting the development of local networks and partnerships. Our results support the entrepreneurial strategy, suggesting that state governments can accelerate high technology development by adopting market-supportive programs that complement private sector initiatives. In addition to positive direct benefits of technology deployment/transfer programs and SBIR programs, entrepreneurial programs affect change in high-technology employment in concert with existing locational and agglomeration advantages. Rural (i.e. low population density) states tend to benefit by technology development programs. Infrastructure strategy programs also facilitate high technology job growth in places where local advantages already exist. Our results suggest that critics of industrial policy are correct that high technology growth is organic and endogenous, yet state governments are able to "pick winners and losers" in ways that grow their local economy. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Providing assistive technology in Italy : The perceived delivery process quality as affecting abandonment

    NARCIS (Netherlands)

    Federici, Stefano; Borsci, Simone

    2016-01-01

    Purpose: The study brings together three aspects rarely observed at once in assistive technology (AT) surveys: (i) the assessment of user interaction/satisfaction with AT and service delivery, (ii) the motivational analysis of AT abandonment, and (iii) the management/design evaluation of AT delivery

  15. The "P2P" Educational Model Providing Innovative Learning by Linking Technology, Business and Research

    Science.gov (United States)

    Dickinson, Paul Gordon

    2017-01-01

    This paper evaluates the effect and potential of a new educational learning model called Peer to Peer (P2P). The study was focused on Laurea, Hyvinkaa's Finland campus and its response to bridging the gap between traditional educational methods and working reality, where modern technology plays an important role. The study describes and evaluates…

  16. Artificial Intelligence Applications to High-Technology Training.

    Science.gov (United States)

    Dede, Christopher

    1987-01-01

    Discusses the use of artificial intelligence to improve occupational instruction in complex subjects with high performance goals, such as those required for high-technology jobs. Highlights include intelligent computer assisted instruction, examples in space technology training, intelligent simulation environments, and the need for adult training…

  17. High efficiency low cost GaAs/Ge cell technology

    Science.gov (United States)

    Ho, Frank

    1990-01-01

    Viewgraphs on high efficiency low cost GaAs/Ge cell technology are presented. Topics covered include: high efficiency, low cost GaAs/Ge solar cells; advantages of Ge; comparison of typical production cells for space applications; panel level comparisons; and solar cell technology trends.

  18. Thermoelectric Energy Conversion Technology for High-Altitude Airships

    Science.gov (United States)

    Choi, Sang H.; Elliott, James R.; King, Glen C.; Park, Yeonjoon; Kim, Jae-Woo; Chu, Sang-Hyon

    2011-01-01

    The High Altitude Airship (HAA) has various application potential and mission scenarios that require onboard energy harvesting and power distribution systems. The power technology for HAA maneuverability and mission-oriented applications must come from its surroundings, e.g. solar power. The energy harvesting system considered for HAA is based on the advanced thermoelectric (ATE) materials being developed at NASA Langley Research Center. The materials selected for ATE are silicon germanium (SiGe) and bismuth telluride (Bi2Te3), in multiple layers. The layered structure of the advanced TE materials is specifically engineered to provide maximum efficiency for the corresponding range of operational temperatures. For three layers of the advanced TE materials that operate at high, medium, and low temperatures, correspondingly in a tandem mode, the cascaded efficiency is estimated to be greater than 60 percent.

  19. Through the Looking Glass: Real-Time Video Using 'Smart' Technology Provides Enhanced Intraoperative Logistics.

    Science.gov (United States)

    Baldwin, Andrew C W; Mallidi, Hari R; Baldwin, John C; Sandoval, Elena; Cohn, William E; Frazier, O H; Singh, Steve K

    2016-01-01

    In the setting of increasingly complex medical therapies and limited physician resources, the recent emergence of 'smart' technology offers tremendous potential for improved logistics, efficiency, and communication between medical team members. In an effort to harness these capabilities, we sought to evaluate the utility of this technology in surgical practice through the employment of a wearable camera device during cardiothoracic organ recovery. A single procurement surgeon was trained for use of an Explorer Edition Google Glass (Google Inc., Mountain View, CA) during the recovery process. Live video feed of each procedure was securely broadcast to allow for members of the home transplant team to remotely participate in organ assessment. Primary outcomes involved demonstration of technological feasibility and validation of quality assurance through group assessment. The device was employed for the recovery of four organs: a right single lung, a left single lung, and two bilateral lung harvests. Live video of the visualization process was remotely accessed by the home transplant team, and supplemented final verification of organ quality. In each case, the organs were accepted for transplant without disruption of standard procurement protocols. Media files generated during the procedures were stored in a secure drive for future documentation, evaluation, and education purposes without preservation of patient identifiers. Live video streaming can improve quality assurance measures by allowing off-site members of the transplant team to participate in the final assessment of donor organ quality. While further studies are needed, this project suggests that the application of mobile 'smart' technology offers not just immediate value, but the potential to transform our approach to the practice of medicine.

  20. High Power Betavoltaic Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation will dramatically improve the performance of tritium-powered betavoltaic batteries through the development of a high-aspect ratio, expanded...

  1. Teaching Innovation in High School Technology Classes

    Science.gov (United States)

    Wright, Geoffrey A.; Skaggs, Paul; West, Richard E.

    2013-01-01

    Innovation is central to modern industry. It can and should be taught in schools. Not only does providing students a background in innovation benefit them later in life and industry, but it also promotes and further develops their critical thinking and collaboration skills. Despite the need for innovation, many have struggled with how to teach it.…

  2. Diagnostic imaging, a 'parallel' discipline. Can current technology provide a reliable digital diagnostic radiology department

    International Nuclear Information System (INIS)

    Moore, C.J.; Eddleston, B.

    1985-01-01

    Only recently has any detailed criticism been voiced about the practicalities of the introduction of generalised, digital, imaging complexes in diagnostic radiology. Although attendant technological problems are highlighted the authors argue that the fundamental causes of current difficulties are not in the generation but in the processing, filing and subsequent retrieval for display of digital image records. In the real world, looking at images is a parallel process of some complexity and so it is perhaps untimely to expect versatile handling of vast image data bases by existing computer hardware and software which, by their current nature, perform tasks serially. (author)

  3. Emerging technologies for high performance infrared detectors

    Directory of Open Access Journals (Sweden)

    Tan Chee Leong

    2018-01-01

    Full Text Available Infrared photodetectors (IRPDs have become important devices in various applications such as night vision, military missile tracking, medical imaging, industry defect imaging, environmental sensing, and exoplanet exploration. Mature semiconductor technologies such as mercury cadmium telluride and III–V material-based photodetectors have been dominating the industry. However, in the last few decades, significant funding and research has been focused to improve the performance of IRPDs such as lowering the fabrication cost, simplifying the fabrication processes, increasing the production yield, and increasing the operating temperature by making use of advances in nanofabrication and nanotechnology. We will first review the nanomaterial with suitable electronic and mechanical properties, such as two-dimensional material, graphene, transition metal dichalcogenides, and metal oxides. We compare these with more traditional low-dimensional material such as quantum well, quantum dot, quantum dot in well, semiconductor superlattice, nanowires, nanotube, and colloid quantum dot. We will also review the nanostructures used for enhanced light-matter interaction to boost the IRPD sensitivity. These include nanostructured antireflection coatings, optical antennas, plasmonic, and metamaterials.

  4. Emerging technologies for high performance infrared detectors

    Science.gov (United States)

    Tan, Chee Leong; Mohseni, Hooman

    2018-01-01

    Infrared photodetectors (IRPDs) have become important devices in various applications such as night vision, military missile tracking, medical imaging, industry defect imaging, environmental sensing, and exoplanet exploration. Mature semiconductor technologies such as mercury cadmium telluride and III-V material-based photodetectors have been dominating the industry. However, in the last few decades, significant funding and research has been focused to improve the performance of IRPDs such as lowering the fabrication cost, simplifying the fabrication processes, increasing the production yield, and increasing the operating temperature by making use of advances in nanofabrication and nanotechnology. We will first review the nanomaterial with suitable electronic and mechanical properties, such as two-dimensional material, graphene, transition metal dichalcogenides, and metal oxides. We compare these with more traditional low-dimensional material such as quantum well, quantum dot, quantum dot in well, semiconductor superlattice, nanowires, nanotube, and colloid quantum dot. We will also review the nanostructures used for enhanced light-matter interaction to boost the IRPD sensitivity. These include nanostructured antireflection coatings, optical antennas, plasmonic, and metamaterials.

  5. Submicron CMOS technologies for high energy physics and space applications

    CERN Document Server

    Anelli, G; Faccio, F; Heijne, Erik H M; Jarron, Pierre; Kloukinas, Kostas C; Marchioro, A; Moreira, P; Snoeys, W

    2001-01-01

    The radiation environment present in some of today's High-Energy Physics (HEP) experiments and in space has a detrimental influence on the integrated circuits working in these environments. Special technologies, called radiation hardened, have been used in the past to prevent the radiation-induced degradation. In the last decades, the market of these special technologies has undergone a considerable shrinkage, rendering them less reliably available and far more expensive than today's mainstream technologies. An alternative approach is to use a deep submicron CMOS technology. The most sensitive part to radiation effects in a MOS transistor is the gate oxide. One way to reduce the effects of ionizing radiation in the gate oxide is to reduce its thickness, which is a natural trend in modern technologies. Submicron CMOS technologies seem therefore a good candidate for implementing radiation-hardened integrated circuits using a commercial, inexpensive technology. Nevertheless, a certain number of radiation-induced...

  6. Application of dry stackable tailings technologies : providing the base for reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Mikula, R.J. [Natural Resources Canada, Devon, AB (Canada). CANMET Energy Technology Centre

    2010-07-01

    The tailings containment structures are some of the largest man made features on the planet. This presentation demonstrated that dry stackable tailings technology may reduce the volume of the accumulated fluid fine tailings. Dry stackable tailings can contribute to boreal forest reclamation and reduce water requirement from the Athabasca River. Much of the water used for the production of each barrel of bitumen is recycled. The water is tied up in the pore spaces of the mineral sand, silt, and clay component which forms the mature fine tailings (MFT) that are contained behind large dykes. Syncrude and Suncor have used a wide variety of technologies to create a dry stackable tailings from this fluid fine tailings substrate. The availability of dry stackable tailings will open options for reclamation strategies that end with the original wetlands or boreal forest. Some of the tailings management options that would lead to a dry stackable tailings naturally also significantly decrease the barrels of water lost with each barrel of bitumen production. These options were discussed along with an analysis of their impact on recycle and pore water quality and quantity. There is an opportunity to remove residual bitumen during the transfer of fluid fine tailings to recover water and create dry stackable tailings. If this bitumen removal is extensive enough, it might be possible to use the dry stackable tailings directly as a reclamation material. tabs., figs.

  7. Reliability achievement in high technology space systems

    Science.gov (United States)

    Lindstrom, D. L.

    1981-01-01

    The production of failure-free hardware is discussed. The elements required to achieve such hardware are: technical expertise to design, analyze, and fully understand the design; use of high reliability parts and materials control in the manufacturing process; and testing to understand the system and weed out defects. The durability of the Hughes family of satellites is highlighted.

  8. HITECHCLO (High Technologies for Protective Military Clothing)

    Science.gov (United States)

    1982-02-01

    microfiber materials are not typical synthetics like a polyester fiberfill, nor are they natural fibers such as down. Webril R is a nonwoven cotton...its biological isolation garment (BIG) for the astronaut provide a three to five micron filter which may have appli- cation for chemical warfare...increasing productivity and effectiveness among those who may be equipped with the garment. It has potential for reducing health hazards and increasing

  9. Technologies for the exploration of highly mineralized geothermal resources

    Science.gov (United States)

    Alkhasov, A. B.; Alkhasova, D. A.; Ramazanov, A. Sh.; Kasparova, M. A.

    2017-09-01

    The prospects of the integrated processing of the high-parameter geothermal resources of the East Ciscaucasia of artesian basin (ECAB) with the conversion of their heat energy into electric energy at a binary geoPP and the subsequent extraction of solved chemical compounds from thermal waters are evaluated. The most promising areas for the exploration such resources are overviewed. The integrated exploration of hightemperature hydrogeothermal brines is a new trend in geothermal power engineering, which can make it possible to significantly increase the production volume of hydrogeothermal resources and develop the geothermal field at a higher level with the realization of the energy-efficient advanced technologies. The large-scale exploration of brines can solve the regional problems of energy supply and import substitution and fulfill the need of Russia in food and technical salt and rare elements. The necessity of the primary integrated exploration of the oil-field highly mineralized brines of the South Sukhokumskii group of gas-oil wells of Northern Dagestan was shown in view of the exacerbated environmental problems. Currently, the oil-field brines with the radioactive background exceeding the allowable levels are discharged at disposal fields. The technological solutions for their deactivation and integrated exploration are proposed. The realization of the proposed technological solutions provides 300 t of lithium carbonate, 1650 t of caustic magnesite powder, 27300 t of chemically precipitated chalk, 116100 t of food salt, and up to 1.4 mln m3 of desalinated water from oil-field brines yearly. Desalinated water at the output of a geotechnological complex can be used for different economic needs, which is important for the arid North Caucasus region, where the fresh water deficiency is acute, especially in its plain part within the ECAB.

  10. Multi-Lab EV Smart Grid Integration Requirements Study. Providing Guidance on Technology Development and Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Markel, T. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Meintz, A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hardy, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Chen, B. [Argonne National Lab. (ANL), Argonne, IL (United States); Bohn, T. [Argonne National Lab. (ANL), Argonne, IL (United States); Smart, J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Scoffield, D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hovsapian, R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Saxena, S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); MacDonald, J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kiliccote, S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kahl, K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pratt, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-05-28

    The report begins with a discussion of the current state of the energy and transportation systems, followed by a summary of some VGI scenarios and opportunities. The current efforts to create foundational interface standards are detailed, and the requirements for enabling PEVs as a grid resource are presented. Existing technology demonstrations that include vehicle to grid functions are summarized. The report also includes a data-based discussion on the magnitude and variability of PEVs as a grid resource, followed by an overview of existing simulation tools that vi This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. can be used to explore the expansion of VGI to larger grid functions that might offer system and customer value. The document concludes with a summary of the requirements and potential action items that would support greater adoption of VGI.

  11. Trend on High-speed Power Line Communication Technology

    Science.gov (United States)

    Ogawa, Osamu

    High-speed power line communication (PLC) is useful technology to easily build the communication networks, because construction of new infrastructure is not necessary. In Europe and America, PLC has been used for broadband networks since the beginning of 21th century. In Japan, high-speed PLC was deregulated only indoor usage in 2006. Afterward it has been widely used for home area network, LAN in hotels and school buildings and so on. And recently, PLC is greatly concerned as communication technology for smart grid network. In this paper, the author surveys the high-speed PLC technology and its current status.

  12. Ultra-high vacuum technology for accelerators

    CERN Multimedia

    CERN. Geneva. Audiovisual Unit; Hilleret, Noël; Strubin, Pierre M

    2002-01-01

    The lectures will start with a review of the basics of vacuum physics required to build Ultra High Vacuum (UHV) systems, such as static and dynamic outgassing. Before reviewing the various pumping and measurement devices, including the most modern one like Non Evaporable Getter (NEG) coatings, an overview of adequate materials to be used in UHV systems will be given together with their treatment (e.g. cleaning procedures and bake out). Practical examples based on existing or future accelerators will be used to illustrate the topics. Finally, a short overview of modern vacuum controls and interlocks will be given.

  13. Technology use among Ghanaian Senior High School mathematics ...

    African Journals Online (AJOL)

    The findings revealed that the extent to which SHS mathematics teachers use technology in teaching was very low. The Independent samples t-test revealed that the male mathematics teachers use more technology (Mean = 2.65, SD = 1.12) than the female teachers (Mean = 1.51, SD =0.47) and teachers with high ...

  14. Hybrid orientation technology and strain engineering for ultra-high ...

    Indian Academy of Sciences (India)

    Hybrid orientation technology and strain engineering for ultra-high speed MOSFETs. T K MAITI and C K MAITI. ∗. Department of Electronics and Electrical Communication Engineering, Indian Institute of Technology,. Kharagpur 721 302, India. MS received 27 March 2012. Abstract. We report here RF MOSFET performance ...

  15. Elaboration of technology organizational models of constructing high-rise buildings in plans of construction organization

    Science.gov (United States)

    Osipenkova, Irina; Simankina, Tatyana; Syrygina, Taisiia; Lukinov, Vitaliy

    2018-03-01

    This article represents features of the elaboration of technology organizational models of high-rise building construction in technology organizational documentation on the example of the plan of construction organization. Some examples of enhancing the effectiveness of high-rise building construction based on developments of several options of the organizational and technological plan are examined. Qualitative technology organizational documentation allows to increase the competitiveness of construction companies and provides prime cost of construction and assembly works reductions. Emphasis is placed on the necessity to comply with the principle of comprehensiveness of engineering, scientific and research works, development activities and scientific and technical support.

  16. High Temperature Particle Filtration Technology; TOPICAL

    International Nuclear Information System (INIS)

    Besmann, T.M.

    2001-01-01

    High temperature filtration can serve to improve the economic, environmental, and energy performance of chemical processes. This project was designed to evaluate the stability of filtration materials in the environments of the production of dimethyldichlorosilane (DDS). In cooperation with Dow Corning, chemical environments for the fluidized bed reactor where silicon is converted to DDS and the incinerator where vents are cornbusted were characterized. At Oak Ridge National Laboratory (ORNL) an exposure system was developed that could simulate these two environments. Filter samples obtained from third parties were exposed to the environments for periods up to 1000 hours. Mechanical properties before and after exposure were determined by burst-testing rings of filter material. The results indicated that several types of filter materials would likely perform well in the fluid bed environment, and two materials would be good candidates for the incinerator environment

  17. High performance nano-composite technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D. [KAERI, Taejon (Korea, Republic of); Kim, E. K.; Jung, S. Y.; Ryu, H. J. [KRICT, Taejon (Korea, Republic of); Hwang, S. S.; Kim, J. K.; Hong, S. M. [KIST, Taejon (Korea, Republic of); Chea, Y. B. [KIGAM, Taejon (Korea, Republic of); Choi, C. H.; Kim, S. D. [ATS, Taejon (Korea, Republic of); Cho, B. G.; Lee, S. H. [HGREC, Taejon (Korea, Republic of)

    1999-06-15

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  18. Materials for high vacuum technology, an overview

    CERN Document Server

    Sgobba, Stefano

    2007-01-01

    In modern accelerators stringent requirements are placed on materials of vacuum systems. Their physical and mechanical properties, machinability, weldability or brazeability are key parameters. Adequate strength, ductility, magnetic properties at room as well as low temperatures are important factors for vacuum systems of accelerators working at cryogenic temperatures, such as the Large Hadron Collider (LHC) under construction at CERN. In addition, baking or activation of Non-Evaporable Getters (NEG) at high temperatures impose specific choices of material grades of suitable tensile and creep properties in a large temperature range. Today, stainless steels are the dominant materials of vacuum constructions. Their metallurgy is extensively treated. The reasons for specific requirements in terms of metallurgical processes are detailed, in view of obtaining adequate purity, inclusion cleanliness, and fineness of the microstructure. In many cases these requirements are crucial to guarantee the final leak tightnes...

  19. High performance nano-composite technology development

    International Nuclear Information System (INIS)

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D.; Kim, E. K.; Jung, S. Y.; Ryu, H. J.; Hwang, S. S.; Kim, J. K.; Hong, S. M.; Chea, Y. B.; Choi, C. H.; Kim, S. D.; Cho, B. G.; Lee, S. H.

    1999-06-01

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  20. Primary care provider perceptions and use of a novel medication reconciliation technology

    Directory of Open Access Journals (Sweden)

    Blake Lesselroth

    2011-05-01

    Conclusions A patient self-service kiosk offers an efficientmechanismto collect amedication adherence history; provider survey responses indicate that they appreciated and used the MR kiosk output. Nonetheless, opportunities exist to improve data displays and embed decision support to facilitate discrepancy management.

  1. Supporting Early Childhood Educators' Use of Embedded Communication Strategies by Providing Feedback via Bug-in-Ear Technology

    Science.gov (United States)

    Riggie, Jennifer

    2013-01-01

    The purpose of this study was to examine the relationship between coaching provided with bug-in-ear technology, the frequency of the early childhood educators' use of targeted communication strategies and children's expressive communication. Four multiple-baseline single-case design experiments were completed to evaluate these relationships.…

  2. Information and Communication Technologies and Continuing Health Professional Education in Canada. A Survey of Providers Final Report.

    Science.gov (United States)

    Memorial Univ., St. John's (Newfoundland).

    The use of information and communication technologies (ICT) in continuing health professional education (CHPE) was examined in a national survey of Canadian CHPE providers. Of the 3,044 surveys distributed to schools of medicine, nursing, and pharmacy, national/provincial health professional associations, nonprofit health advocacy organizations,…

  3. S'COOL Provides Research Opportunities and Current Data for Today's Technological Classroom

    Science.gov (United States)

    Green, Carolyn J.; Chambers, Lin H.; Racel, Anne M.

    1999-01-01

    NASA's Students' Cloud Observations On-Line (S'COOL) project, a hands-on educational project, was an innovative idea conceived by the scientists in the Radiation Sciences Branch at NASA Langley Research Center, Hampton, Virginia, in 1996. It came about after a local teacher expressed the idea that she wanted her students to be involved in real-life science. S'COOL supports NASA's Clouds and the Earth's Radiant Energy System (CERES) instrument, which was launched on the Tropical Rainforest Measuring Mission (TRMM) in November, 1997, as part of NASA's Earth Science Enterprise. With the S'COOL project students observe clouds and related weather conditions, compute data and note vital information while obtaining ground truth observations for the CERES instrument. The observations can then be used to help validate the CERES measurements, particularly detection of clear sky from space. In addition to meeting math, science and geography standards, students are engaged in using the computer to obtain, report and analyze current data, thus bringing modern technology into the realm of classroom, a paradigm that demands our attention.

  4. New Health Technologies: A UK Perspective Comment on "Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies".

    Science.gov (United States)

    Parvizi, Nassim; Parvizi, Sahar

    2017-05-09

    New health technologies require development and evaluation ahead of being incorporated into the patient care pathway. In light of the recent publication by Lehoux et al who discuss the role of entrepreneurs, investors and regulators in providing value to new health technologies, we summarise the processes involved in making new health technologies available for use in the United Kingdom. © 2017 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

  5. Space Photovoltaic Research and Technology 1985: High Efficiency, Space Environment, and Array Technology

    Science.gov (United States)

    1985-01-01

    The seventh NASA Conference on Space Photovoltaic Research and Technology was held at NASA Lewis Research Center, Cleveland, Ohio, from 30 April until 2 May 1985. Its purpose was to assess the progress made, the problems remaining, and future strategy for space photovoltaic research. Particular emphasis was placed on high efficiency, space environment, and array technology.

  6. Technology Knowledge: High School Science Teachers' Conceptions of the Nature of Technology

    Science.gov (United States)

    Waight, Noemi

    2014-01-01

    In-depth interviews guided by video elicitations examined 30 high school science teachers' conceptions of technology and by extension how these conceptions reflected dimensions of nature of technology. Altogether, 64% of the teachers characterized their schools and departments as aggressive-moderate adopters with generous access and support…

  7. Progress in advanced high temperature turbine materials, coatings, and technology

    Science.gov (United States)

    Freche, J. C.; Ault, G. M.

    1978-01-01

    Advanced materials, coatings, and cooling technology is assessed in terms of improved aircraft turbine engine performance. High cycle operating temperatures, lighter structural components, and adequate resistance to the various environmental factors associated with aircraft gas turbine engines are among the factors considered. Emphasis is placed on progress in development of high temperature materials for coating protection against oxidation, hot corrosion and erosion, and in turbine cooling technology. Specific topics discussed include metal matrix composites, superalloys, directionally solidified eutectics, and ceramics.

  8. Intelligent technologies in process of highly-precise products manufacturing

    Science.gov (United States)

    Vakhidova, K. L.; Khakimov, Z. L.; Isaeva, M. R.; Shukhin, V. V.; Labazanov, M. A.; Ignatiev, S. A.

    2017-10-01

    One of the main control methods of the surface layer of bearing parts is the eddy current testing method. Surface layer defects of bearing parts, like burns, cracks and some others, are reflected in the results of the rolling surfaces scan. The previously developed method for detecting defects from the image of the raceway was quite effective, but the processing algorithm is complicated and lasts for about 12 ... 16 s. The real non-stationary signals from an eddy current transducer (ECT) consist of short-time high-frequency and long-time low-frequency components, therefore a transformation is used for their analysis, which provides different windows for different frequencies. The wavelet transform meets these conditions. Based on aforesaid, a methodology for automatically detecting and recognizing local defects in bearing parts surface layer has been developed on the basis of wavelet analysis using integral estimates. Some of the defects are recognized by the amplitude component, otherwise an automatic transition to recognition by the phase component of information signals (IS) is carried out. The use of intelligent technologies in the manufacture of bearing parts will, firstly, significantly improve the quality of bearings, and secondly, significantly improve production efficiency by reducing (eliminating) rejections in the manufacture of products, increasing the period of normal operation of the technological equipment (inter-adjustment period), the implementation of the system of Flexible facilities maintenance, as well as reducing production costs.

  9. Exploring educational partnerships: a case study of client provider technology education partnerships in New Zealand primary schools

    Science.gov (United States)

    Weal, Brenda; Coll, Richard

    2007-04-01

    This paper explores the notion of educational partnerships and reports on research on client provider partnerships between full primary schools and external technology education providers for Year 7 and 8 New Zealand students (age range approx. 12 to 13 years). Educational reforms in New Zealand and the introduction of a more holistic technology education curriculum in 1995 changed the nature of the relationship between the technology education partners. The research sought to identify, from the perspective of the primary schools (clients), factors that contribute to successful partnerships between them and their technology education provider. A mixed methods approach consisting of a survey of client schools, in-depth interviews and a series of four in-depth case studies (drawing on issues derived from the survey) was employed. Issues relating to teacher subculture, leadership roles and inflexibility of official processes all surfaced. The research points to an absence of commitment, shared understanding, shared power, leadership, communication and accountability in many educational partnerships that were the focus of this work.

  10. Strategic alliances and product development in high technology new firms: The moderating effect of technological capabilities

    NARCIS (Netherlands)

    Haeussler, C.; Patzelt, H.; Zahra, Shaker

    2012-01-01

    High technology new firms have extensively used strategic alliances to gain access to knowledge, resources and capabilities. However, given their inexperience and limited resources, these firms are vulnerable to their more established partners' potential opportunism. This raises the question: How

  11. New Pulsed Power Technology for High Current Accelerators

    International Nuclear Information System (INIS)

    Caporaso, G J

    2002-01-01

    Recent advances in solid-state modulators now permit the design of a new class of high current accelerators. These new accelerators will be able to operate in burst mode at frequencies of several MHz with unprecedented flexibility and precision in pulse format. These new modulators can drive accelerators to high average powers that far exceed those of any other technology and can be used to enable precision beam manipulations. New insulator technology combined with novel pulse forming lines and switching may enable the construction of a new type of high gradient, high current accelerator. Recent developments in these areas will be reviewed

  12. Development of high-level radioactive waste treatment and conversion technologies 'Dry decontamination technology development for highly radioactive contaminants'

    International Nuclear Information System (INIS)

    Oh, Won Zin; Lee, K. W.; Won, H. J.; Jung, C. J.; Choi, W. K.; Kim, G. N.; Moon, J. K.

    2001-04-01

    The followings were studied through the project entitled 'Dry Decontamination Technology Development for Highly Radioactive Contaminants'. 1.Contaminant Characteristics Analysis of Domestic Nuclear Fuel Cycle Projects(NFCP) and Applicability Study of the Unit Dry-Decontamination Techniques A. Classification of contaminated equipments and characteristics analysis of contaminants B. Applicability study of the unit dry-decontamination techniques 2.Performance Evaluation of Unit Dry Decontamination Technique A. PFC decontamination technique B. CO2 decontamination technique C. Plasma decontamination technique 3.Development of Residual Radiation Assessment Methodology for High Radioactive Facility Decontamination A. Development of radioactive nuclide diffusion model on highly radioactive facility structure B. Obtainment of the procedure for assessment of residual radiation dose 4.Establishment of the Design Concept of Dry Decontamination Process Equipment Applicable to Highly Radioactive Contaminants 5.TRIGA soil unit decontamination technology development A. Development of soil washing and flushing technologies B. Development of electrokinetic soil decontamination technology

  13. High-level Waste Long-term management technology development

    International Nuclear Information System (INIS)

    Choi, Jong Won; Kang, C. H.; Ko, Y. K.

    2012-02-01

    The purpose of this project is to develop a long-term management system(A-KRS) which deals with spent fuels from domestic nuclear power stations, HLW from advanced fuel cycle and other wastes that are not admitted to LILW disposal site. Also, this project demonstrate the feasibility and reliability of the key technologies applied in the A-KRS by evaluating them under in-situ condition such as underground research laboratory and provide important information to establish the safety assessment and long-term management plan. To develop the technologies for the high level radioactive wastes disposal, demonstrate their reliability under in-situ condition and establish safety assessment of disposal system, The major objects of this project are the following: Ο An advanced disposal system including waste containers for HLW from advanced fuel cycle and pyroprocess has been developed. Ο Quantitative assessment tools for long-term safety and performance assessment of a radwaste disposal system has been developed. Ο Hydrological and geochemical investigation and interpretation methods has been developed to evaluate deep geological environments. Ο The THMC characteristics of the engineered barrier system and near-field has been evaluated by in-situ experiments. Ο The migration and retardation of radionuclides and colloid materials in a deep geological environment has been investigated. The results from this project will provide important information to show HLW disposal plan safe and reliable. The knowledge from this project can also contribute to environmental conservation by applying them to the field of oil and gas industries to store their wastes safe

  14. High quality, high efficiency welding technology for nuclear power plants

    International Nuclear Information System (INIS)

    Aoki, Shigeyuki; Nagura, Yasumi

    1996-01-01

    For nuclear power plants, it is required to ensure the safety under the high reliability and to attain the high rate of operation. In the manufacture and installation of the machinery and equipment, the welding techniques which become the basis exert large influence to them. For the purpose of improving joint performance and excluding human errors, welding heat input and the number of passes have been reduced, the automation of welding has been advanced, and at present, narrow gap arc welding and high energy density welding such as electron beam welding and laser welding have been put to practical use. Also in the welding of pipings, automatic gas metal arc welding is employed. As for the welding of main machinery and equipment, there are the welding of the joints that constitute pressure boundaries, the build-up welding on the internal surfaces of pressure vessels for separating primary water from them, and the sealing welding of heating tubes and tube plates in steam generators. These weldings are explained. The welding of pipings and the state of development and application of new welding methods are reported. (K.I.)

  15. The Conceptualization of Value in the Value Proposition of New Health Technologies Comment on "Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies".

    Science.gov (United States)

    Buttigieg, Sandra C; Hoof, Joost van

    2017-07-03

    Lehoux et al provide a highly valid contribution in conceptualizing value in value propositions for new health technologies and developing an analytic framework that illustrates the interplay between health innovation supply-side logic (the logic of emergence) and demand-side logic (embedding in the healthcare system). This commentary brings forth several considerations on this article. First, a detailed stakeholder analysis provides the necessary premonition of potential hurdles in the development, implementation and dissemination of a new technology. This can be achieved by categorizing potential stakeholder groups on the basis of the potential impact of future technology. Secondly, the conceptualization of value in value propositions of new technologies should not only embrace business/economic and clinical values but also ethical, professional and cultural values, as well as factoring in the notion of usability and acceptance of new technology. As a final note, the commentary emphasises the point that technology should facilitate delivery of care without negatively affecting doctor-patient communications, physical examination skills, and development of clinical knowledge. © 2018 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

  16. Advances in high pressure science and technology: proceedings of the fourth national conference on high pressure science and technology

    International Nuclear Information System (INIS)

    Yousuf, Mohammad; Subramanian, N.; Govinda Rajan, K.

    1997-09-01

    The proceedings of the fourth National Conference on High Pressure Science and Technology covers a wide area of research and development activities in the field of high pressure science and technology, broadly classified into the following themes: mechanical behaviour of materials; instrumentation and methods in high pressure research; pressure calibration, standards and safety aspects; phase transitions; shock induced reactions; mineral science, geophysics, geochemistry and planetary sciences; optical, electronic and transport properties; synthesis of materials; soft condensed matter physics and liquid crystals; computational methods in high pressure research. Papers relevant to INIS are indexed separately

  17. High-speed 3D imaging by DMD technology

    Science.gov (United States)

    Hoefling, Roland

    2004-05-01

    The paper presents an advanced solution for capturing the height of an object in addition to the 2D image as it is frequently desired in machine vision applications. Based upon the active fringe projection methodology, the system takes advantage of a series of patterns projected onto the object surface and observed by a camera to provide reliable, accurate and highly resolved 3D data from any scattering object surface. The paper shows how the recording of a projected image series can be significantly accelerated and improved in quality to overcome current limitations. The key is ALP - a metrology dedicated hardware design using the Discovery 1100 platform for the DMD micromirror device of Texas Instruments Inc. The paper describes how this DMD technology has been combined with latest LED illumination, high-performance optics, and recent digital camera solutions. The ALP based DMD projection can be exactly synchronized with one or multiple cameras so that gray value intensities generated by pulse-width modulation (PWM) are recorded with high linearity. Based upon these components, a novel 3D measuring system with outstanding properties is described. The "z-Snapper" represents a new class of 3D imaging devices, it is fast enough for time demanding in-line testing, and it can be built completely mobile: laptop based, hand-held, and battery powered. The turnkey system provides a "3D image" as simple as an usual b/w picture is grabbed. It can be instantly implemented into future machine vision applications that will benefit from the step into the third dimension.

  18. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

    OpenAIRE

    Douglas, Heather E; Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

    2017-01-01

    Introduction: There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to su...

  19. Technology's Covert Socialization of Children: High-Tech Toys.

    Science.gov (United States)

    Kritt, David W.

    2001-01-01

    Child's play may be at risk in today's technologically-oriented society. The limited interactive capacities of high-tech toys constrain the possibilities for cognitive development, interpersonal learning, and the quality of relationships that can be formed. Current high-tech toys change the nature of play, so that the object, rather than the…

  20. Overview on the high power excimer laser technology

    Science.gov (United States)

    Liu, Jingru

    2013-05-01

    High power excimer laser has essential applications in the fields of high energy density physics, inertial fusion energy and industry owing to its advantages such as short wavelength, high gain, wide bandwidth, energy scalable and repetition operating ability. This overview is aimed at an introduction and evaluation of enormous endeavor of the international high power excimer laser community in the last 30 years. The main technologies of high power excimer laser are reviewed, which include the pumping source technology, angular multiplexing and pulse compressing, beam-smoothing and homogenous irradiation, high efficiency and repetitive operation et al. A high power XeCl laser system developed in NINT of China is described in detail.

  1. The use of high technology in STEM education

    Science.gov (United States)

    Lakshminarayanan, Vasudevan; McBride, Annette C.

    2015-10-01

    There has been a huge increase in the use of high technology in education. In this paper we discuss some aspects of technology that have major applications in STEM education, namely, (a) virtual reality systems, (b) personal electronic response systems aka "clickers", (c) flipped classrooms, (d) mobile learning "m-Learning", (e) massive open online courses "MOOCS", (f) internet-of-things and (g) cloud computing.

  2. Construction technology of high-rise pile cap foundation of offshore wind power in Taiwan Strait

    Science.gov (United States)

    Li, C. Y.; Chi, Y.; Sun, X. Q.; Han, Y. P.; Chen, X.; Zhao, L. C.; Zhang, H.

    2017-11-01

    Offshore wind farms promise to become an important source of energy in the near future. The high-rise pile cap foundation is one of the typical foundation types for offshore wind turbine. This paper introduces the structural characteristics and construction technology of high-rise pile cap foundation, aiming at the characteristics of the sea area of Taiwan Strait and combining with engineering examples. The construction technology of high-rise pile cap foundation is expounded emphatically from the manufacture and transportation of steel pipe piles, pile foundation construction and bearing platform construction. Compared with the traditional construction technology, the construction technologies used in this project are safer and more reliable. The construction period of piles cap foundation is shortened by 10 ∼ 48 days. The construction technology provides reference for offshore wind power foundation construction.

  3. Utilizing HPC Network Technologies in High Energy Physics Experiments

    CERN Document Server

    AUTHOR|(CDS)2088631; The ATLAS collaboration

    2017-01-01

    Because of their performance characteristics high-performance fabrics like Infiniband or OmniPath are interesting technologies for many local area network applications, including data acquisition systems for high-energy physics experiments like the ATLAS experiment at CERN. This paper analyzes existing APIs for high-performance fabrics and evaluates their suitability for data acquisition systems in terms of performance and domain applicability. The study finds that existing software APIs for high-performance interconnects are focused on applications in high-performance computing with specific workloads and are not compatible with the requirements of data acquisition systems. To evaluate the use of high-performance interconnects in data acquisition systems a custom library, NetIO, is presented and compared against existing technologies. NetIO has a message queue-like interface which matches the ATLAS use case better than traditional HPC APIs like MPI. The architecture of NetIO is based on a interchangeable bac...

  4. Complementary Product Integration by High-Technology New Ventures: The Role of Initial Technology Strategy

    OpenAIRE

    Satish Nambisan

    2002-01-01

    In this paper, we investigate the relationship between complementary product integration and the initial technology strategy of a high-technology new venture. With customers placing considerable emphasis on cross-product integration, the success of a new venture is dependent as much on its ability to integrate its product with relevant complementary products as on the core product functionality itself. We identify three types of complementary product integration: value-added internal, add-on ...

  5. Do High Technology Policies Work?: High Technology Industry Employment Growth in U.S. Metropolitan Areas, 1988-1998

    Science.gov (United States)

    Jenkins, J. Craig; Leicht, Kevin T.; Jaynes, Arthur

    2006-01-01

    Since the 1970s, federal, state and local governments have launched an array of new high technology development programs. Researchers and policy-makers disagree about the relative merits of these policies. We address the effects of seven of these policies on high tech industry employment growth in metropolitan statistical areas in the United…

  6. Advanced Decontamination Technologies: High Hydrostatic Pressure on Meat Products

    Science.gov (United States)

    Garriga, Margarita; Aymerich, Teresa

    The increasing demand for “natural” foodstuffs, free from chemical additives, and preservatives has triggered novel approaches in food technology developments. In the last decade, practical use of high-pressure processing (HPP) made this emerging non-thermal technology very attractive from a commercial point of view. Despite the fact that the investment is still high, the resulting value-added products, with an extended and safe shelf-life, will fulfil the wishes of consumers who prefer preservative-free minimally processed foods, retaining sensorial characteristics of freshness. Moreover, unlike thermal treatment, pressure treatment is not time/mass dependant, thus reducing the time of processing.

  7. High power LEDs - technology status and market applications

    International Nuclear Information System (INIS)

    Steranka, F.M.; Bhat, J.; Collins, D.; Cook, L.; Craford, M.G.; Fletcher, R.; Gardner, N.; Grillot, P.; Goetz, W.; Keuper, M.; Khare, R.; Kim, A.; Krames, M.; Harbers, G.; Ludowise, M.; Martin, P.S.; Misra, M.; Mueller, G.; Mueller-Mach, R.; Rudaz, S.; Shen, Y.C.; Steigerwald, D.; Subramanya, S.; Trottier, T.; Wierer, J.J.

    2002-01-01

    High power light emitting diodes (LEDs) continue to increase in output flux with the best III-nitride based devices today emitting over 150 lm of white, cyan, or green light. The key design features of such products will be covered with special emphasis on power packaging, flip-chip device design, and phosphor coating technology. The high-flux performance of these devices is enabling many new applications for LEDs. Two of the most interesting of these applications are LCD display backlighting and vehicle forward lighting. The advantages of LEDs over competing lighting technologies will be covered in detail. (Abstract Copyright [2002], Wiley Periodicals, Inc.)

  8. High Speed and Slow Motion: The Technology of Modern High Speed Cameras

    Science.gov (United States)

    Vollmer, Michael; Mollmann, Klaus-Peter

    2011-01-01

    The enormous progress in the fields of microsystem technology, microelectronics and computer science has led to the development of powerful high speed cameras. Recently a number of such cameras became available as low cost consumer products which can also be used for the teaching of physics. The technology of high speed cameras is discussed,…

  9. High-performance technology for indexing of high volumes of Earth remote sensing data

    Science.gov (United States)

    Strotov, Valery V.; Taganov, Alexander I.; Kolesenkov, Aleksandr N.; Kostrov, Boris V.

    2017-10-01

    The present paper has suggested a technology for search, indexing, cataloging and distribution of aerospace images on the basis of geo-information approach, cluster and spectral analysis. It has considered information and algorithmic support of the system. Functional circuit of the system and structure of the geographical data base have been developed on the basis of the geographical online portal technology. Taking into account heterogeneity of information obtained from various sources it is reasonable to apply a geoinformation platform that allows analyzing space location of objects and territories and executing complex processing of information. Geoinformation platform is based on cartographic fundamentals with the uniform coordinate system, the geographical data base, a set of algorithms and program modules for execution of various tasks. The technology for adding by particular users and companies of images taken by means of professional and amateur devices and also processed by various software tools to the array system has been suggested. Complex usage of visual and instrumental approaches allows significantly expanding an application area of Earth remote sensing data. Development and implementation of new algorithms based on the complex usage of new methods for processing of structured and unstructured data of high volumes will increase periodicity and rate of data updating. The paper has shown that application of original algorithms for search, indexing and cataloging of aerospace images will provide an easy access to information spread by hundreds of suppliers and allow increasing an access rate to aerospace images up to 5 times in comparison with current analogues.

  10. ELABORATION OF HIGH-VOLTAGE PULSE INSTALLATIONS AND PROVIDING THEIR OPERATION PROTECTIVE MEASURES

    Directory of Open Access Journals (Sweden)

    А. М. Hashimov

    2016-01-01

    Full Text Available The article presents design engineering methods for the high-voltage pulse installations of technological purpose for disinfection of drinking water, sewage, and edible liquids by high field micro- and nanosecond pulsing exposure. Designing potentialities are considered of the principal elements of the high-voltage part and the discharge circuit of the installations towards assuring the best efficient on-load utilization of the source energy and safe operation of the high-voltage equipment. The study shows that for disinfection of drinking water and sewage it is expedient to apply microsecond pulse actions causing the electrohydraulic effect in aqueous media with associated complex of physical processes (ultraviolet emission, generation of ozone and atomic oxygen, mechanical compression waves, etc. having detrimental effect on life activity of the microorganisms. In case of disinfecting edible liquids it is recommended to use the nanosecond pulses capable of straight permeating the biological cell nucleus, inactivating it. Meanwhile, the nutritive and biological values of the foodstuffs are saved and their organoleptic properties are improved. It is noted that in elaboration process of high-frequency pulse installations special consideration should be given to issues of the operating personnel safety discipline and securing conditions for the entire installation uninterrupted performance. With this objective in view the necessary requirements should be fulfilled on shielding the high- and low-voltage installation parts against high-frequency electromagnetic emissions registered by special differential sensors. Simultaneously, the abatement measures should be applied on the high-voltage equipment operational noise level. The authors offer a technique for noise abatement to admissible levels (lower than 80 dB A by means of coating the inside surface with shielded enclosure of densely-packed abutting sheets of porous electro-acoustic insulating

  11. High-Performance Secure Database Access Technologies for HEP Grids

    International Nuclear Information System (INIS)

    Vranicar, Matthew; Weicher, John

    2006-01-01

    The Large Hadron Collider (LHC) at the CERN Laboratory will become the largest scientific instrument in the world when it starts operations in 2007. Large Scale Analysis Computer Systems (computational grids) are required to extract rare signals of new physics from petabytes of LHC detector data. In addition to file-based event data, LHC data processing applications require access to large amounts of data in relational databases: detector conditions, calibrations, etc. U.S. high energy physicists demand efficient performance of grid computing applications in LHC physics research where world-wide remote participation is vital to their success. To empower physicists with data-intensive analysis capabilities a whole hyperinfrastructure of distributed databases cross-cuts a multi-tier hierarchy of computational grids. The crosscutting allows separation of concerns across both the global environment of a federation of computational grids and the local environment of a physicist's computer used for analysis. Very few efforts are on-going in the area of database and grid integration research. Most of these are outside of the U.S. and rely on traditional approaches to secure database access via an extraneous security layer separate from the database system core, preventing efficient data transfers. Our findings are shared by the Database Access and Integration Services Working Group of the Global Grid Forum, who states that 'Research and development activities relating to the Grid have generally focused on applications where data is stored in files. However, in many scientific and commercial domains, database management systems have a central role in data storage, access, organization, authorization, etc, for numerous applications'. There is a clear opportunity for a technological breakthrough, requiring innovative steps to provide high-performance secure database access technologies for grid computing. We believe that an innovative database architecture where the secure

  12. High-Performance Secure Database Access Technologies for HEP Grids

    Energy Technology Data Exchange (ETDEWEB)

    Matthew Vranicar; John Weicher

    2006-04-17

    The Large Hadron Collider (LHC) at the CERN Laboratory will become the largest scientific instrument in the world when it starts operations in 2007. Large Scale Analysis Computer Systems (computational grids) are required to extract rare signals of new physics from petabytes of LHC detector data. In addition to file-based event data, LHC data processing applications require access to large amounts of data in relational databases: detector conditions, calibrations, etc. U.S. high energy physicists demand efficient performance of grid computing applications in LHC physics research where world-wide remote participation is vital to their success. To empower physicists with data-intensive analysis capabilities a whole hyperinfrastructure of distributed databases cross-cuts a multi-tier hierarchy of computational grids. The crosscutting allows separation of concerns across both the global environment of a federation of computational grids and the local environment of a physicist’s computer used for analysis. Very few efforts are on-going in the area of database and grid integration research. Most of these are outside of the U.S. and rely on traditional approaches to secure database access via an extraneous security layer separate from the database system core, preventing efficient data transfers. Our findings are shared by the Database Access and Integration Services Working Group of the Global Grid Forum, who states that "Research and development activities relating to the Grid have generally focused on applications where data is stored in files. However, in many scientific and commercial domains, database management systems have a central role in data storage, access, organization, authorization, etc, for numerous applications.” There is a clear opportunity for a technological breakthrough, requiring innovative steps to provide high-performance secure database access technologies for grid computing. We believe that an innovative database architecture where the

  13. SBRT to adrenal metastases provides high local control with minimal toxicity

    Directory of Open Access Journals (Sweden)

    Kristin Plichta, MD, PhD

    2017-10-01

    Conclusions: These results complement the limited existing body of literature by demonstrating that SBRT provides good control of treated adrenal gland metastasis; however, high-grade late toxicities may occur. More stringent dose constraint limits may prevent associated serious adverse events.

  14. Providing high-quality HIV care in a deeply rural setting – the ...

    African Journals Online (AJOL)

    Providing high-quality HIV care in a deeply rural setting – the Zithulele experience. C Young, B Gaunt. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.7196/sajhivmed.1035 · AJOL African Journals Online. HOW TO ...

  15. Learning Technologies: Tweeting in a High School Social Studies Class

    Science.gov (United States)

    Bull, Prince Hycy; Adams, Shayla

    2012-01-01

    This study focuses on the perceptions of 46 high school students on the integration of Twitter as a learning technology. Twitter was introduced and used to supplement instruction in the course for the first six weeks of the 2010/2011 academic year. The integration included designing twitter pages, communication, reflections, use of twitpics…

  16. Rapid single flux quantum logic in high temperature superconductor technology

    NARCIS (Netherlands)

    Shunmugavel, K.

    2006-01-01

    A Josephson junction is the basic element of rapid single flux quantum logic (RSFQ) circuits. A high operating speed and low power consumption are the main advantages of RSFQ logic over semiconductor electronic circuits. To realize complex RSFQ circuits in HTS technology one needs a reproducible

  17. SAFT Li-ion Technology for High Rate Applications

    National Research Council Canada - National Science Library

    Nechev, Kamen; Deveney, Bridget; Guseynov, Teymur; Erbacher, John; Vukson, Stephen

    2006-01-01

    SAFT will present an update of its state-of-the art Very High Power (VHP) Lithium-ion (Li-ion) technology. The VHP cells are currently being qualified for use in military aircraft applications as well as in future military hybrid vehicles...

  18. Photonic Technologies for Ultra-High-Speed Information Highways

    DEFF Research Database (Denmark)

    Bouchoule, S; Lèfevre, R.; Legros, E.

    1999-01-01

    The ACTS project HIGHWAY (AC067) addresses promising ultra-high speed optoelectronic components and system technologies for 40 Gbit/s time-division-multiplexed (TDM) transport systems. Advanced 40 Gbit/s TDM system lab demonstrators are to be realized and tested over installed field fiber testbed...

  19. The principles of ultra high pressure technology and its application ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-08-18

    Aug 18, 2008 ... Key words: Ultra-high pressure (UHP), food processing/preservation and new food-processing technologies. INTRODUCTION. Increasing .... solutions, silicone oil, sodium benzoate solutions, ethanol solutions, inert gases and .... The residual enzyme activity and dissolved oxygen results in enzymatic and ...

  20. Internationalization of high-technology ventures from emerging economies

    DEFF Research Database (Denmark)

    Turcan, Romeo V.

    This paper aims to contribute towards filling in the gap in the international entrepreneurhsip literature by exploring how and why new high-technology ventures internationalize from an emerging economy, namely Moldova. To address the above research questions, a multiple-case study strategy...

  1. You and Technology, A High School Case Study Text.

    Science.gov (United States)

    Damaskos, Nickander J., Ed.; Smyth, Michael P., Ed.

    This second draft of a manuscript for a high school engineering and technology course uses case studies as its format. The principles associated with various engineering problems are presented along with their effects on daily life. Topics include the computer, the automotive power system, satellite communications, the petroleum industry, water…

  2. High frequency MOSFET gate drivers technologies and applications

    CERN Document Server

    Zhang, Zhiliang

    2017-01-01

    This book describes high frequency power MOSFET gate driver technologies, including gate drivers for GaN HEMTs, which have great potential in the next generation of switching power converters. Gate drivers serve as a critical role between control and power devices.

  3. Identifying and Researching Market Opportunities for New High Technology Products.

    Science.gov (United States)

    Dunstan, Peter

    Using a product called the synchro-pulse welder as a case study example, this paper discusses the activities of CSIRO (Commonwealth Scientific and Industrial Research Organisation) in identifying and marketing new high-technology products. A general discussion of CSIRO's market research plans includes two goals to be attained within the next 5…

  4. Characteristics Contributing to High-Technology Start-Up Success

    DEFF Research Database (Denmark)

    Goslin, L.; Brown, W.; Palm, T.

    1993-01-01

    The factors contributing to the success of high technology start-up firms have received much discussion in current business literature. The discussion of the characteristics of success has been based on increasing substantiation by empirical research. The available information suggests that the p...

  5. High Altitude Platforms for Disaster Recovery: Capabilities, Strategies, and Techniques for Providing Emergency Telecommunications

    Energy Technology Data Exchange (ETDEWEB)

    Juan D. Deaton

    2008-05-01

    Natural disasters and terrorist acts have significant potential to disrupt emergency communication systems. These emergency communication networks include first-responder, cellular, landline, and emergency answering services such as 911, 112, or 999. Without these essential emergency communications capabilities, search, rescue, and recovery operations during a catastrophic event will be severely debilitated. High altitude platforms could be fitted with telecommunications equipment and used to support these critical communications missions once the catastrophic event occurs. With the ability to be continuously on station, HAPs provide excellent options for providing emergency coverage over high-risk areas before catastrophic incidents occur. HAPs could also provide enhanced 911 capabilities using either GPS or reference stations. This paper proposes potential emergency communications architecture and presents a method for estimating emergency communications systems traffic patterns for a catastrophic event.

  6. Plastic Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    Science.gov (United States)

    Claus, Robert; And Others

    This course guide for a plastic technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

  7. Wood Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    Science.gov (United States)

    Claus, Robert; And Others

    This course guide for a wood technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

  8. Providing Policy Implication Based on the R and D Portfolio Analysis in Advanced Countries in the Nuclear Technology

    International Nuclear Information System (INIS)

    Moon, K. H.; Lee, M. K.; Won, B. C.; Kim, S. S.; Lee, J. H.; Yun, S. W.; Jeong, I. K.; Lee, Y. C.; Lee, Y. J.; Kim, Y. S.

    2013-08-01

    This study is to provide the investment direction of nuclear R and D, which is the most efficient and reasonable integrating the various aspects comprehensively. This study includes four parts. In the first part, we extracted Mega-trend and driving forces of nuclear R and D field by using various reports published by National Intelligence Council of US, UN, etc. Also, in this part we established the linkage between megatrend factors focussing on nuclear and the five aspects including society, technology, ecology, economics and politics. In the second part, we analyzed the nuclear R and D investment directions of major advanced countries including US, Japan, EU and China for comparing the investment portfolio in the specific research area. In the third part, domestic investment of nuclear R and D was reviewed by analyzing the investment trend of nuclear R and D in the past, with their connection to nuclear policy, and to the levels and capacities of national technologies of nuclear. In the final part, the desirable directions of nuclear R and D investment were suggested comprehensively taking into consideration various aspects including the Mega-trend associated with nuclear, nuclear R and D directions of major advanced countries, and the level and capacities of the domestic nuclear technologies

  9. Measuring relative efficiency of applied science and technology universities in province of Semnan, Iran and providing suggestions for merging units

    Directory of Open Access Journals (Sweden)

    Abolfazl Danaei

    2013-03-01

    Full Text Available University of applied science and technology has been designed to create a platform for multilateral activities such as industrial, military and academic in developing countries to promote science and scientific research applications. These universities are responsible to promote practical training in quantitative and qualitative indicators and they provide appropriate infrastructure to implement theoretical graduates to solve practical problems to build necessary infrastructure to transfer modern technology into developing countries. During the past few years, there have been tremendous development on these units but some of them have not been efficient. In this paper, we present an empirical study to measure the relative efficiencies of various units of applied science and technology universities using data envelopment analysis. The proposed model of this paper uses two inputs including human resources as well as total assets and two outputs including the number of graduate students as well as operating profit. The results of the study have indicated that some of the units are inefficient and need to be merged with other units to increase the relative efficiency of these universities.

  10. Rapid single flux quantum logic in high temperature superconductor technology

    OpenAIRE

    Shunmugavel, K.

    2006-01-01

    A Josephson junction is the basic element of rapid single flux quantum logic (RSFQ) circuits. A high operating speed and low power consumption are the main advantages of RSFQ logic over semiconductor electronic circuits. To realize complex RSFQ circuits in HTS technology one needs a reproducible fabrication of Josephson junctions with low parameter spread. High quality HTS junctions require a fully epitaxial multilayer structure with clean interfaces and a smooth surface morphology. Neodymium...

  11. Using Audience Response Technology to provide formative feedback on pharmacology performance for non-medical prescribing students - a preliminary evaluation

    Science.gov (United States)

    2012-01-01

    handsets and personalised formative feedback highly. The significant correlation between ART response scores and student exam scores suggests that formative feedback can provide students with a useful reference point in terms of their level of exam-readiness. PMID:23148762

  12. Using Audience Response Technology to provide formative feedback on pharmacology performance for non-medical prescribing students - a preliminary evaluation

    Directory of Open Access Journals (Sweden)

    Mostyn Alison

    2012-11-01

    individualised handsets and personalised formative feedback highly. The significant correlation between ART response scores and student exam scores suggests that formative feedback can provide students with a useful reference point in terms of their level of exam-readiness.

  13. Adoption and Usage of mHealth Technology on Quality and Experience of Care Provided by Frontline Workers: Observations From Rural India.

    Science.gov (United States)

    Kaphle, Sangya; Chaturvedi, Sharad; Chaudhuri, Indrajit; Krishnan, Ram; Lesh, Neal

    2015-05-28

    mHealth apps are deployed with the aim of improving access, quality, and experience of health care. It is possible that any mHealth intervention can yield differential impacts for different types of users. Mediating and determining factors, including personal and socioeconomic factors, affect technology adoption, the way health workers leverage and use the technology, and subsequently the quality and experience of care they provide. To develop a framework to assess whether mHealth platforms affect the quality and experience of care provided by frontline workers, and whether these effects on quality and experience are different depending on the level of technology adoption and individual characteristics of the health worker. Literacy, education, age, and previous mobile experience are identified as individual factors that affect technology adoption and use, as well as factors that affect the quality and experience of care directly and via the technology. Formative research was conducted with 15 community health workers (CHWs) using CommCare, an mHealth app for maternal and newborn care, in Bihar, India. CHWs were first classified on the level of CommCare adoption using data from CommCareHQ and were then shadowed on home visits to evaluate their levels of technology proficiency, and the quality and experience of care provided. Regression techniques were employed to test the relationships. Out of all the CHWs, 2 of them refused to participate in the home visits, however, we did have information on their levels of technology adoption and background characteristics, which were included in the analysis as relevant. Level of technology adoption was important for both quality and experience of care. The quality score for high users of CommCare was higher by 33.4% (P=.04), on average, compared to low users of CommCare. Those who scored higher on CommCare proficiency also provided significantly higher quality and experience of care, where an additional point in Comm

  14. Simulation of high fluence swelling behavior in technological materials

    International Nuclear Information System (INIS)

    Garner, F.A.; Powell, R.W.; Diamond, S.; Lauritzen, T.; Rowcliffe, A.F.; Sprague, J.A.; Keefer, D.

    1977-06-01

    The U.S. Breeder Reactor Program is employing charged particle irradiation experiments at accelerated displacement rates to simulate neutron-induced microstructural changes in materials of technological interest. Applications of the simulation technique range from the study of fundamental microstructural mechanisms to the development of predictions of the high fluence swelling behavior of candidate alloys for breeder reactor ducts and fuel cladding. An exact equivalence probably cannot be established between all facets of the microstructural evolution which occurs in the disparate charged-particle and neutron environments. To aid in the correlation of data developed in the two environments an assessment has been made of the factors influencing the simulation process. A series of intercorrelation programs and analysis activities have been conducted to identify and explore the relevant phenomena. The factors found to exert substantial influence on the correlation process fall into two categories, one which deals with those variables which are atypical of the neutron environment and one which deals with the additional factors which arise due to the large differences in displacement rate of the two irradiation environments. While the various simulation techniques have been invaluable in determining the basic mechanisms and parametric dependencies of swelling, the potential of these tools in the confident prediction of swelling at high neutron fluence has yet to be realized. The basic problem lies in the inability of the simulation technique to reproduce the early microstructural development in the period that precedes and encompasses the incubation of voids. The concepts of temperature shift and dose equivalency have also been found to be more complicated than previously imagined. Preconditioning of metals in a neutron environment prior to simulation testing is now being employed in order to provide more appropriate starting microstructures

  15. Broadening opportunities for job seekers with disabilities: strategies to effectively provide assistive technology in One-Stop centers.

    Science.gov (United States)

    Timmons, Jaimie Ciulla; Boeltzig, Heike; Fesko, Sheila Lynch; Cohen, Allison; Hamner, Doris

    2007-01-01

    The Workforce Investment Act (WIA) of 1998 mandates that partners in the One-Stop Career Center (One-Stop) system be prepared to serve a diverse customer base, including job seekers with disabilities. For many such individuals, effective service delivery depends in part on the existence of appropriate and efficient assistive technology (AT) options. This article presents challenges experienced by One-Stop partners related to AT provision as well as strategies for providing effective AT support. Findings from case study research conducted in several One-Stops across the country revealed three strategies that have enhanced employment services and addressed barriers. These are (a) an accurate assessment of AT needs, (b) staff training and practice using the equipment, and (c) the ability to make the most of limited financial resources. Implications for the most efficient ways to provide AT options are discussed.

  16. Advanced High-Temperature Engine Materials Technology Progresses

    Science.gov (United States)

    1997-01-01

    The objective of the Advanced High Temperature Engine Materials Technology Program (HITEMP) at the NASA Lewis Research Center is to generate technology for advanced materials and structural analysis that will increase fuel economy, improve reliability, extend life, and reduce operating costs for 21st century civil propulsion systems. The primary focus is on fan and compressor materials (polymer-matrix composites - PMC's), compressor and turbine materials (superalloys, and metal-matrix and intermetallic-matrix composites - MMC's and IMC's), and turbine materials (ceramic-matrix composites - CMC's). These advanced materials are being developed in-house by Lewis researchers and on grants and contracts.

  17. Italian high technology shows its wares at CERN

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    Italian industry held an exhibition at CERN on 14-17 November with 26 firms displaying innovative technological developments. In particular it featured categories such as mechanics, high-vacuum technologies, electronics for detectors, and electric and civil engineering. The exhibition was inaugurated in the presence of Guido Possa, vice-minister for education, universities and research. The event was organized by Sandro Centro, INFN researcher and Industrial Liaison Officer at CERN, along with Federico Ferrini, scientific officer for International Organizations of Geneva and the Italian Chamber of Commerce in Switzerland

  18. Development of Nano technology in High Performance Concrete

    International Nuclear Information System (INIS)

    Nima Farzadnia; Abang Abdullah Abang Ali; Ramazan Demirboga; Demirboga, R.

    2011-01-01

    Concrete is the most widely used building material all around the world which has been undergoing many changes aligned with technological advancement. The most recent available type of concrete is high performance concrete which is produced by employing different admixtures both chemical and mineral to enhance mechanical properties and durability. Recently, technology has made it easy for scientist to study nano sized admixtures and their effect on microstructure of concrete. This paper reviews nano particles in cement composites and how they can improve different properties of concrete. (author)

  19. Highly Polluted Wastewaters Treatment by Improved Dissolved Air Flotation Technology

    Science.gov (United States)

    Moga, I. C.; Covaliu, C. I.; Matache, M. G.; Doroftei, B. I.

    2017-06-01

    Numerous investigations are oriented towards the development of new wastewater treatment technologies, having high efficiencies for removing even low concentrations of pollutants found in water. These efforts were determined by the destroyer impact of the pollutants to the environment and human’s health. For this reason this paper presents our study concerning an improved dissolved air flotation technology for wastewater treatment. There is described a dissolved air flotation (DAF) installation composed by two equipments: pressurized capsule and lamellar settling. Also, there are presented some advantages of using nanoparticles as flotation collectors.

  20. Method and apparatus for providing high bandwidth, low noise mechanical I/O for computer systems

    Science.gov (United States)

    Rosenberg, Louis B.

    1998-01-01

    A method and apparatus for providing high bandwidth and low noise mechanical input and output for computer systems. A gimbal mechanism provides two revolute degrees of freedom to an object about two axes of rotation. A linear axis member is coupled to the gimbal mechanism at the intersection of the two axes of rotation. The linear axis member is capable of being translated along a third axis to provide a third degree of freedom. The user object is coupled to the linear axis member and is thus translatable along the third axis so that the object can be moved along all three degrees of freedom. Transducers associated with the provided degrees of freedom include sensors and actuators and provide an electromechanical interface between the object and a digital processing system. Capstan drive mechanisms transmit forces between the transducers and the object. The linear axis member can also be rotated about its lengthwise axis to provide a fourth degree of freedom, and, optionally, a floating gimbal mechanism is coupled to the linear axis member to provide fifth and sixth degrees of freedom to an object. Transducer sensors are associated with the fourth, fifth, and sixth degrees of freedom. The interface is well suited for simulations of medical procedures and simulations in which an object such as a stylus or a joystick is moved and manipulated by the user.

  1. Development and Operation of the nuclear technology program for improving the public acceptance by providing the right information

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Juwoon; Kang, Mincheol; Min, Sangky; Yi, Jongmin; Yi, Yunyoung

    2013-11-15

    This detailed assignment conducted to improve the communication efficiency through the operation of differentiated programs to accomplish 'Establishment of knowledge diffusion system for improvement of Nuclear understanding', which is the purpose of the general assignment. We developed the programs on each social opinion leader groups by providing the right information on nuclear(radiation) technology, and had a forum for providing the right information on each social groups. Also, Consisted the consultant group, which participates humanities and social sciences, civic group, science teachers, the press, national assembly workers. Technology PR was performed 4 times, which is 1 time more than the original plan of 4 times. In the theme of affection of radiation, we broadened the vision of various fields which enabled to approach in general for the PR program. We Induced a positive reaction from the participants in political areas which coexistent of uncertain expectation and difficult vision of nuclear and radiation, by sharing the development possibility in relation with potential values of radiation industry and other industries and delivering accurate information, not a fragmentary knowledge, but in general. We hope that this results will contribute to establishing the effective nuclear knowledge diffusion program system.

  2. Prediction of high frequency core loss for electrical steel using the data provided by manufacturer

    Energy Technology Data Exchange (ETDEWEB)

    Roy, Rakesh [National Institute of Technology Meghalaya, Shillong (India); Dalal, Ankit; Kumar, Praveen [Indian Institute of Technology Guwahati, Assam (India)

    2016-07-15

    This paper describes a technique to determine the core loss data, at high frequencies, using the loss data provided by the lamination manufacturer. Steinmetz equation is used in this proposed method to determine core loss at high frequency. This Steinmetz equation consists of static hysteresis and eddy current loss. The presented technique considers the coefficients of Steinmetz equation as variable with frequency and peak magnetic flux density. The high frequency core loss data, predicted using this model is compared with the catalogue data given by manufacturer and very good accuracy has been obtained for a wide range of frequency. - Highlights: • A curve fitting algorithm is proposed to predict core loss at high frequency. • The loss data given by the steel manufacturers are used in curve fitting algorithm. • The algorithm is tested on nine different material’s data set given by the manufacturer.

  3. Optimal welding technology of high strength steel S690QL

    Directory of Open Access Journals (Sweden)

    Dusan Arsic

    2015-02-01

    Full Text Available In this paper is presented the detailed procedure for defining the optimal technology for welding the structures made of the high strength steel S690QL. That steel belongs into a group of steels with exceptional mechanical properties. The most prominent properties are the high tensile strength and impact toughness, at room and at elevated temperatures, as well. However, this steel has a negative characteristic - proneness to appearance of cold cracks.  That impedes welding and makes as an imperative to study different aspects of this steel's properties as well as those of eventual filler metal. Selection and defining of the optimal welding technology of this high strength steel is done for the purpose of preserving the favorable mechanical properties once the welded joint is realized; properties of the welded metal and the melting zone, as well as in the heat affected zone, which is the most critical zone of the welded joint.

  4. Integrative Production Technology for High-Wage Countries

    CERN Document Server

    2012-01-01

    Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of ...

  5. Advanced high throughput MOX fuel fabrication technology and sustainable development

    International Nuclear Information System (INIS)

    Krellmann, Juergen

    2005-01-01

    The MELOX plant in the south of France together with the La Hague reprocessing plant, are part of the two industrial facilities in charge of closing the nuclear fuel cycle in France. Started up in 1995, MELOX has since accumulated a solid know-how in recycling plutonium recovered from spent uranium fuel into MOX: a fuel blend comprised of both uranium and plutonium oxides. Converting recovered Pu into a proliferation-resistant material that can readily be used to power a civil nuclear reactor, MOX fabrication offers a sustainable solution to safely take advantage of the plutonium's high energy content. Being the first large-capacity industrial facility dedicated to MOX fuel fabrication, MELOX distinguishes itself from the first generation MOX plants with high capacity (around 200 tHM versus around 40 tHM) and several unique operational features designed to improve productivity, reliability and flexibility while maintaining high safety standards. Providing an exemplary reference for high throughput MOX fabrication with 1,000 tHM produced since start-up, the unique process and technologies implemented at MELOX are currently inspiring other MOX plant construction projects (in Japan with the J-MOX plant, in the US and in Russia as part of the weapon-grade plutonium inventory reduction). Spurred by the growing international demand, MELOX has embarked upon an ambitious production development and diversification plan. Starting from an annual level of 100 tons of heavy metal (tHM), MELOX demonstrated production capacity is continuously increasing: MELOX is now aiming for a minimum of 140 tHM by the end of 2005, with the ultimate ambition of reaching the full capacity of the plant (around 200 tHM) in the near future. With regards to its activity, MELOX also remains deeply committed to sustainable development in a consolidated involvement within AREVA group. The French minister of Industry, on August 26th 2005, acknowledged the benefits of MOX fuel production at MELOX: 'In

  6. High Technology Service Value Maximization through an MCDM-Based Innovative e-Business Model

    Science.gov (United States)

    Huang, Chi-Yo; Tzeng, Gwo-Hshiung; Ho, Wen-Rong; Chuang, Hsiu-Tyan; Lue, Yeou-Feng

    The emergence of the Internet has changed the high technology marketing channels thoroughly in the past decade while E-commerce has already become one of the most efficient channels which high technology firms may skip the intermediaries and reach end customers directly. However, defining appropriate e-business models for commercializing new high technology products or services through Internet are not that easy. To overcome the above mentioned problems, a novel analytic framework based on the concept of high technology customers’ competence set expansion by leveraging high technology service firms’ capabilities and resources as well as novel multiple criteria decision making (MCDM) techniques, will be proposed in order to define an appropriate e-business model. An empirical example study of a silicon intellectual property (SIP) commercialization e-business model based on MCDM techniques will be provided for verifying the effectiveness of this novel analytic framework. The analysis successful assisted a Taiwanese IC design service firm to define an e-business model for maximizing its customer’s SIP transactions. In the future, the novel MCDM framework can be applied successful to novel business model definitions in the high technology industry.

  7. "Will they be good enough parents?": Ethical dilemmas, views, and decisions among assisted reproductive technology (ART) providers.

    Science.gov (United States)

    Klitzman, Robert

    2017-01-01

    Many adults may make less-than-ideal parents, but important ethical questions arise concerning whether assisted reproductive technology (ART) providers should thus ever refuse treatment to certain patients, and if so, when, and how to decide. In-depth interviews of approximately 1 hour each were conducted with 27 ART providers (17 physicians, and 10 other health providers). Clinicians often struggle with whether to attempt to assess and predict patients' potential future parenting abilities, and if so, how, and how to proceed if doubts arise. Providers face profound ethical tensions between adults' rights to reproduce and best interests of the eventual children (i.e., to be born into "stable" homes), and questions about the extent of professional responsibilities toward potential parents versus toward future offspring. Providers generally feel uncomfortable with this role, and hence don't want it, partly since they lack training for it, but also because of inherent empirical and ethical uncertainties. Concerns about discrimination based on the mere presence or history of certain diagnoses or traits (e.g., single marital status or past depression) also arise. Clinicians frequently seek to resolve these tensions through various strategies-for example, referring these decisions to others; hoping that patients drop out of treatment; assessing and increasing social support (e.g., arranging for possible co-parents); assisting the patient psychotherapeutically; or seeking to communicate concerns to patients only indirectly or implicitly. Clinics vary in how they make and approach these decisions-whether they rely on a formal ethics or other committee. These data, the first to explore several critical aspects of in vitro fertilization (IVF) providers' views and decision making about assessing the quality of patients' potential future parenting, have critical implications for future practice, education, research, and guidelines. Further empirical and normative scholarship

  8. Adaptive Optics Technology for High-Resolution Retinal Imaging

    Science.gov (United States)

    Lombardo, Marco; Serrao, Sebastiano; Devaney, Nicholas; Parravano, Mariacristina; Lombardo, Giuseppe

    2013-01-01

    Adaptive optics (AO) is a technology used to improve the performance of optical systems by reducing the effects of optical aberrations. The direct visualization of the photoreceptor cells, capillaries and nerve fiber bundles represents the major benefit of adding AO to retinal imaging. Adaptive optics is opening a new frontier for clinical research in ophthalmology, providing new information on the early pathological changes of the retinal microstructures in various retinal diseases. We have reviewed AO technology for retinal imaging, providing information on the core components of an AO retinal camera. The most commonly used wavefront sensing and correcting elements are discussed. Furthermore, we discuss current applications of AO imaging to a population of healthy adults and to the most frequent causes of blindness, including diabetic retinopathy, age-related macular degeneration and glaucoma. We conclude our work with a discussion on future clinical prospects for AO retinal imaging. PMID:23271600

  9. The development of advanced robotics technology in high radiation environment

    International Nuclear Information System (INIS)

    Lee, Yong Bum; Cho, Jaiwan; Lee, Nam Ho; Choi, Young Soo; Park, Soon Yong; Lee, Jong Min; Park, Jin Suk; Kim, Seung Ho; Kim, Byung Soo; Moon, Byung Soo.

    1997-07-01

    In the tele-operation technology using tele-presence in high radiation environment, stereo vision target tracking by centroid method, vergence control of stereo camera by moving vector method, stereo observing system by correlation method, horizontal moving axis stereo camera, and 3 dimensional information acquisition by stereo image is developed. Also, gesture image acquisition by computer vision and construction of virtual environment for remote work in nuclear power plant. In the development of intelligent control and monitoring technology for tele-robot in hazardous environment, the characteristics and principle of robot operation. And, robot end-effector tracking algorithm by centroid method and neural network method are developed for the observation and survey in hazardous environment. 3-dimensional information acquisition algorithm by structured light is developed. In the development of radiation hardened sensor technology, radiation-hardened camera module is designed and tested. And radiation characteristics of electric components is robot system is evaluated. Also 2-dimensional radiation monitoring system is developed. These advanced critical robot technology and telepresence techniques developed in this project can be applied to nozzle-dam installation /removal robot system, can be used to realize unmanned remotelization of nozzle-dam installation / removal task in steam generator of nuclear power plant, which can be contributed for people involved in extremely hazardous high radioactivity area to eliminate their exposure to radiation, enhance their task safety, and raise their working efficiency. (author). 75 refs., 21 tabs., 15 figs

  10. STUDY ON A HIGH PERFORMANCE INTEGRATED BEEKEEPING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    A POPESCU

    2003-10-01

    Full Text Available This study aimed to make an economic evaluation of a high performance modern beekeeping technology leading to an increased bee family capacity. The new technology removes the disadvantages of the traditional one utilising just natural picking based on Robinia, Lime, sunflower and wild flora, most of times deeply affected by unfavourable climate conditions (drought, rainfalls and conducting to important bee losses during the winter season and mainly during the critical period till the next picking. The modern technology assures 75 % more bees per family, an increased queen laying capacity by 33 %,, a 50 % reduction of bee loss in winter season, by 20 % more honey , by 50 % more propolis, by 33 % more pollen, by 50 % more swarms, by 60 % more royal jelly and by 50 % more bee venom. The modern technology is based on a scientific feeding management applying a stimulating, completing and proteinic feeding (pollen cake and/or pollen substitutes such as: degreased powder milk 30 % and soya bean cake, involving peculiar costs ranking between USD 9.73-10.06 per family/year. The total bee rearing costs have been estimated at USD 17.83 in average per family/year, of which: 55.5 % feeding costs, 6.8 % queen replacement cost, 3.2 % treatments cost, 13.5 % costs for supplying new frames and combs,17.4 % transportation costs for moving of bee families and the remaining of 3.6 % labour costs. Taking into account a standard apiary (100 bee families of an increased power, a beekeeper can obtain an USD 12,100.4 annual income, by 55.9 % higher than in case of the traditional beekeeping technology. As a conclusion, the new technology assures a higher biological and economical efficiency, USD 3,350 profit gain that is a profit by 48 % higher than in case of the classic technology. For this reason, we recommend this modern technology to be implemented by beekeepers if they would like to transform their apiaries into high performance commercial farms.

  11. Health-risk behaviors among high school athletes and preventive services provided during sports physicals.

    Science.gov (United States)

    Johnson, Karen E; McRee, Annie-Laurie

    2015-01-01

    Preparticipation examinations (PPEs), or sports physicals, present opportunities for health care providers to identify and discuss common adolescent health-risk behaviors. We sought to examine the prevalence of health-risk behaviors among high school athletes and the proportion of providers who address these behaviors during PPEs. For this descriptive study we used data from two statewide surveys: a survey of adolescents (n = 46,492) and a survey of nurse practitioners and physicians (n = 561). The most prevalent risk behaviors reported by student athletes were low levels of physical activity (70%), bullying perpetration (41%), and alcohol use (41%). Most providers (≥75%) addressed many common risk behaviors during PPEs but fewer addressed bullying, violence, and prescription drug use. Topics discussed differed by provider type and patient population. Many providers addressed critical threats to adolescent health during PPEs, but findings suggest potential disconnects between topics addressed during PPEs and behaviors of athletes. Copyright © 2015 National Association of Pediatric Nurse Practitioners. Published by Elsevier Inc. All rights reserved.

  12. Thermionic integrated circuit technology for high power space applications

    International Nuclear Information System (INIS)

    Yadavalli, S.R.

    1984-01-01

    Thermionic triode and integrated circuit technology is in its infancy and it is emerging. The Thermionic triode can operate at relatively high voltages (up to 2000V) and at least tens of amperes. These devices, including their use in integrated circuitry, operate at high temperatures (800 0 C) and are very tolerant to nuclear and other radiations. These properties can be very useful in large space power applications such as that represented by the SP-100 system which uses a nuclear reactor. This paper presents an assessment of the application of thermionic integrated circuitry with space nuclear power system technology. A comparison is made with conventional semiconductor circuitry considering a dissipative shunt regulator for SP-100 type nuclear power system rated at 100 kW. The particular advantages of thermionic circuitry are significant reductions in size and mass of heat dissipation and radiation shield subsystems

  13. Pulsed and high temperature superconducting magnet technology in Oxford

    Science.gov (United States)

    Jones, H.; Jenkins, R. G.; Van Cleemput, M.; Nicholas, R. J.; Siertsema, W. J.; van der Burgt, M.

    1994-07-01

    We present a brief account of the Oxford pulsed field facility. Multisection coils for fields of 50 T in 20 mm bores are described and a specific example is discussed. Two design studies for mixing stationary or quasi-stationary platform field magnets with pulsed coils for fields of 75 T and higher are outlined. Work on the application of high temperature superconductors to magnet technology is also reported.

  14. Progress Toward Demonstrating a High Performance Optical Tape Recording Technology

    Science.gov (United States)

    Oakley, W. S.

    1996-01-01

    This paper discusses the technology developments achieved during the first year of a program to develop a high performance digital optical tape recording device using a solid state, diode pumped, frequency doubled green laser source. The goal is to demonstrate, within two years, useful read/write data transfer rates to at least 100 megabytes per second and a user capacity of up to one terabyte per cartridge implemented in a system using a '3480' style mono-reel tape cartridge.

  15. Status of high-temperature heat-pipe technology

    International Nuclear Information System (INIS)

    Ranken, W.A.

    1982-01-01

    This paper discusses the application of heat pipes to nuclear reactor space power systems. Characteristics of the device that favor such an application are described and recent results of current technology development programs are presented. Research areas that will need to be addressed in demonstrating that adequate lifetimes can be achieved with evaporation/condensation cycles operating at high temperatures in a reactor environment are also discussed

  16. Provider perceptions of barriers and facilitators of HPV vaccination in a high-risk community.

    Science.gov (United States)

    Javanbakht, Marjan; Stahlman, Shauna; Walker, Susan; Gottlieb, Sami; Markowitz, Lauri; Liddon, Nicole; Plant, Aaron; Guerry, Sarah

    2012-06-22

    Maximizing HPV vaccine uptake among those at highest risk for cervical cancer is critical. We explored healthcare provider perspectives on factors influencing HPV vaccination among adolescent girls in a community with high cervical cancer rates. From March to May 2009, we conducted in-depth interviews with 21 medical staff providing care to adolescent girls at two clinics in Los Angeles, CA, serving a predominantly Hispanic population with high cervical cancer rates. Interviews were recorded and transcribed data were reviewed for coding and thematic content related to potential barriers and facilitators of HPV vaccination. Providers and medical staff overwhelmingly focused on parental beliefs as barriers to HPV vaccination. Perceived parental misconceptions acting as barriers included the belief that adolescents do not need vaccinations and that no-cost vaccine programs like Vaccines for Children are only available for younger children. Perceived parental concerns that the vaccine will promote sexual activity were prevalent, which prompted providers to frame HPV vaccine as a "routine" vaccine. However, the medical staff felt mothers with a friend or relative supportive of HPV vaccination were more likely to request the vaccine. The staff also noted that for Hispanic parents the "preferred" source of information is peers; if the "right people" in the community were supportive of HPV vaccine, parents were more willing to vaccinate. Other barriers included lack of immunization records among immigrant parents and a difficult-to-reach, mobile clientele. Providers noted a number of barriers to HPV vaccination, including some perceived parental misconceptions that could be addressed with education about the need for adolescent vaccines and available free vaccine programs. Because community support appears particularly important to Hispanic parents, the use of promotoras - peer liaisons between health organizations and the community - may increase HPV vaccine uptake in

  17. The Bright Elusive Butterfly of Value in Health Technology Development Comment on "Providing Value to New Health Technology: The Early Contribution of Entrepreneurs, Investors, and Regulatory Agencies".

    Science.gov (United States)

    Greenhalgh, Trisha; Fahy, Nick; Shaw, Sara

    2017-05-29

    The current system of health technology development is characterised by multiple misalignments. The "supply" side (innovation policy-makers, entrepreneurs, investors) and the "demand" side (health policy-makers, regulators, health technology assessment, purchasers) operate under different - and conflicting - logics. The system is less a "pathway" than an unstable ecosystem of multiple interacting sub-systems. "Value" means different things to each of the numerous actors involved. Supply-side dynamics are built on fictions; regulatory checks and balances are designed to assure quality, safety and efficacy, not to ensure that technologies entering the market are either desirable or cost-effective. Assessment of comparative and cost-effectiveness usually comes too late in the process to shape an innovation's development. We offer no simple solutions to these problems, but in the spirit of commencing a much-needed public debate, we suggest some tentative ways forward. First, universities and public research funders should play a more proactive role in shaping the system. Second, the role of industry in forging long-term strategic partnerships for public benefit should be acknowledged (though not uncritically). Third, models of "responsible innovation" and public input to research priority-setting should be explored. Finally, the evidence base on how best to govern inter-sectoral health research partnerships should be developed and applied. © 2018 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

  18. 75 FR 68600 - Secretarial India High Technology Business Development Mission; February 6-11, 2011

    Science.gov (United States)

    2010-11-08

    ... companies. Key service industries include information technology, telecommunications, hotels, banking, media... U.S. high technology industries. Representatives of the U.S. Trade and Development Agency (USTDA... Department of Commerce Secretarial India High Technology Business Development Mission; February 6...

  19. Helium High Pressure Tanks at EADS Space Transportation New Technology with Thermoplastic Liner

    National Research Council Canada - National Science Library

    Benedic, Fabien; Leard, Jean-Philippe; Lefloch, Christian

    2005-01-01

    Although EADS ST has been involved in high pressure tanks for 25 years. EADS ST is still developing new technologies and products to provide the best solution in response to the evolution of the market in terms of performances and costs...

  20. Using Tablet Technologies to Engage and Motivate Urban High School Students

    Science.gov (United States)

    Howard, Nicol R.; Howard, Keith E.

    2017-01-01

    In this two-year study, researchers examined the impact of using tablet technologies across content areas in an urban high school setting. Class observations provided notable examples of how student motivation and learning appeared to be enhanced by use of the iPads in conjunction with opportunities to collaborate and be creative in the context of…

  1. Restructuring High School Math Learning Spaces with Interactive Technology and Transformative Pedagogy

    Science.gov (United States)

    Lucas, Roland

    2013-01-01

    There are three hypotheses for this research: 1. High school mathematics students in urban public schools, who are provided interactive technology resources during normal course work, will experience a multiplier effect of enhanced learning in mathematics. They will have an increase in positive dispositions indicative of their identity development…

  2. Recent Advances in Food Processing Using High Hydrostatic Pressure Technology.

    Science.gov (United States)

    Wang, Chung-Yi; Huang, Hsiao-Wen; Hsu, Chiao-Ping; Yang, Binghuei Barry

    2016-01-01

    High hydrostatic pressure is an emerging non-thermal technology that can achieve the same standards of food safety as those of heat pasteurization and meet consumer requirements for fresher tasting, minimally processed foods. Applying high-pressure processing can inactivate pathogenic and spoilage microorganisms and enzymes, as well as modify structures with little or no effects on the nutritional and sensory quality of foods. The U.S. Food and Drug Administration (FDA) and the U.S. Department of Agriculture (USDA) have approved the use of high-pressure processing (HPP), which is a reliable technological alternative to conventional heat pasteurization in food-processing procedures. This paper presents the current applications of HPP in processing fruits, vegetables, meats, seafood, dairy, and egg products; such applications include the combination of pressure and biopreservation to generate specific characteristics in certain products. In addition, this paper describes recent findings on the microbiological, chemical, and molecular aspects of HPP technology used in commercial and research applications.

  3. Development of superconductor electronics technology for high-end computing

    Science.gov (United States)

    Silver, A.; Kleinsasser, A.; Kerber, G.; Herr, Q.; Dorojevets, M.; Bunyk, P.; Abelson, L.

    2003-12-01

    This paper describes our programme to develop and demonstrate ultra-high performance single flux quantum (SFQ) VLSI technology that will enable superconducting digital processors for petaFLOPS-scale computing. In the hybrid technology, multi-threaded architecture, the computational engine to power a petaFLOPS machine at affordable power will consist of 4096 SFQ multi-chip processors, with 50 to 100 GHz clock frequency and associated cryogenic RAM. We present the superconducting technology requirements, progress to date and our plan to meet these requirements. We improved SFQ Nb VLSI by two generations, to a 8 kA cm-2, 1.25 µm junction process, incorporated new CAD tools into our methodology, demonstrated methods for recycling the bias current and data communication at speeds up to 60 Gb s-1, both on and between chips through passive transmission lines. FLUX-1 is the most ambitious project implemented in SFQ technology to date, a prototype general-purpose 8 bit microprocessor chip. We are testing the FLUX-1 chip (5K gates, 20 GHz clock) and designing a 32 bit floating-point SFQ multiplier with vector-register memory. We report correct operation of the complete stripline-connected gate library with large bias margins, as well as several larger functional units used in FLUX-1. The next stage will be an SFQ multi-processor machine. Important challenges include further reducing chip supply current and on-chip power dissipation, developing at least 64 kbit, sub-nanosecond cryogenic RAM chips, developing thermally and electrically efficient high data rate cryogenic-to-ambient input/output technology and improving Nb VLSI to increase gate density.

  4. Using Technology to Facilitate Differentiated High School Science Instruction

    Science.gov (United States)

    Maeng, Jennifer L.

    2017-10-01

    This qualitative investigation explored the beliefs and practices of one secondary science teacher, Diane, who differentiated instruction and studied how technology facilitated her differentiation. Diane was selected based on the results of a previous study, in which data indicated that Diane understood how to design and implement proactively planned, flexible, engaging instructional activities in response to students' learning needs better than the other study participants. Data for the present study included 3 h of semi-structured interview responses, 37.5 h of observations of science instruction, and other artifacts such as instructional materials. This variety of data allowed for triangulation of the evidence. Data were analyzed using a constant comparative approach. Results indicated that technology played an integral role in Diane's planning and implementation of differentiated science lessons. The technology-enhanced differentiated lessons employed by Diane typically attended to students' different learning profiles or interest through modification of process or product. This study provides practical strategies for science teachers beginning to differentiate instruction, and recommendations for science teacher educators and school and district administrators. Future research should explore student outcomes, supports for effective formative assessment, and technology-enhanced readiness differentiation among secondary science teachers.

  5. Providing high-quality care at the end of life: the role of education and guidance.

    Science.gov (United States)

    Dobson, Jill

    2017-11-09

    Palliative care in the UK has been ranked as the best in the world. So where did palliative care go so wrong that a 168-page document is required to inform staff how to care for dying patients if it has been going so well for so long? Those nearing the end of their life deserve to be given optimum care, attention, compassion and consideration, but this is not always the case. The Liverpool Care Pathway was a tool originally devised to help health professionals provide high-quality end-of-life care to people in the final phase of life. This tool, when used in the correct way, could provide the 'gold standard' of end-of-life care for patients. However, a national review found that rather than a tick-box exercise, care of the dying should be centred around individualised care planning for the dying patient, as highlighted in the publication of the guidance: One Chance to Get It Right. Care of the dying is a complex skill that requires nurses to provide some of the most challenging care, and for which many nurses have received little or no training. The implementation of this guidance into practice will require thoughtful change management, abandoning an old way of working in order to ensure excellence and high-quality care for patients nearing the end of life.

  6. Examining the Highs and Lows of the Collaborative Relationship Between Technical Assistance Providers and Prevention Implementers.

    Science.gov (United States)

    Chilenski, Sarah M; Welsh, Janet; Olson, Jonathan; Hoffman, Lesa; Perkins, Daniel F; Feinberg, Mark E

    2018-02-01

    The PROSPER model uses a three-tiered community partnership, university researcher, and Cooperative Extension-based technical assistance system to support the delivery of evidence-based interventions in communities. This study examines the trajectory and predictors of the collaborative relationship between technical assistance providers and community teams across the three phases of organization, implementation, and sustainability. Members of 14 PROmoting School-university-community Partnerships to Enhance Resilience (PROSPER) community teams and directors of local agencies rated communities' levels of readiness and adolescent substance use norms. Technical assistance providers rated their collaborative relationship with their teams at 14 occasions across 4.5 years. Results from mixed models show that levels of collaboration were stable until the sustainability phase, when they increased significantly. Team differences in change were significant during the implementation phase. Community readiness predicted levels of the collaborative relationship over time: high community readiness was associated with a high level of collaboration during organization, but a decline in collaboration during implementation. These results provide a more nuanced understanding of the relationship between technical assistance provision and community prevention teams and lead to recommendations to improve dissemination models to achieve a greater public health impact.

  7. Treatment technologies for non-high-level wastes (USA)

    International Nuclear Information System (INIS)

    Cooley, C.R.; Clark, D.E.

    1976-06-01

    Non-high-level waste arising from operations at nuclear reactors, fuel fabrication facilities, and reprocessing facilities can be treated using one of several technical alternatives prior to storage. Each alternative and the associated experience and status of development are summarized. The technology for treating non-high-level wastes is generally available for industrial use. Improved techniques applicable to the commercial nuclear fuel cycle are being developed and demonstrated to reduce the volume of waste and to immobilize it for storage. 36 figures, 59 references

  8. LEARNERS: Interdisciplinary Learning Technology Projects Provide Visualizations and Simulations for Use of Geospatial Data in the Classroom

    Science.gov (United States)

    Farrell, N.; Hoban, S.

    2001-05-01

    The NASA Leading Educators to Applications, Research and NASA-related Educational Resources in Science (LEARNERS) initiative supports seven projects for enhancing kindergarten-to-high school science, geography, technology and mathematics education through Internet-based products derived from content on NASA's mission. Topics incorporated in LEARNERS projects include remote sensing of the Earth for agriculture and weather/climate studies, virtual exploration of remote worlds using robotics and digital imagery. Learners are engaged in inquiry or problem-based learning, often assuming the role of an expert scientist as part of an interdisciplinary science team, to study and explain practical problems using real-time NASA data. The presentation/poster will demonstrate novel uses of remote sensing data for K-12 and Post-Secondary students. This will include the use of visualizations, tools for educators, datasets, and classroom scenarios.

  9. Health information technology to facilitate communication involving health care providers, caregivers, and pediatric patients: a scoping review.

    Science.gov (United States)

    Gentles, Stephen James; Lokker, Cynthia; McKibbon, K Ann

    2010-06-18

    Pediatric patients with health conditions requiring follow-up typically depend on a caregiver to mediate at least part of the necessary two-way communication with health care providers on their behalf. Health information technology (HIT) and its subset, information communication technology (ICT), are increasingly being applied to facilitate communication between health care provider and caregiver in these situations. Awareness of the extent and nature of published research involving HIT interventions used in this way is currently lacking. This scoping review was designed to map the health literature about HIT used to facilitate communication involving health care providers and caregivers (who are usually family members) of pediatric patients with health conditions requiring follow-up. Terms relating to care delivery, information technology, and pediatrics were combined to search MEDLINE, EMBASE, and CINAHL for the years 1996 to 2008. Eligible studies were selected after three rounds of duplicate screening in which all authors participated. Data regarding patient, caregiver, health care provider, HIT intervention, outcomes studied, and study design were extracted and maintained in a Microsoft Access database. Stage of research was categorized using the UK's Medical Research Council (MRC) framework for developing and evaluating complex interventions. Quantitative and qualitative descriptive summaries are presented. We included 104 eligible studies (112 articles) conducted in 17 different countries and representing 30 different health conditions. The most common conditions were asthma, type 1 diabetes, special needs, and psychiatric disorder. Most studies (88, 85%) included children 2 to 12 years of age, and 73 (71%) involved home care settings. Health care providers operated in hospital settings in 96 (92%) of the studies. Interventions featured 12 modes of communication (eg, Internet, intranets, telephone, video conferencing, email, short message service [SMS], and

  10. High-performance N-polar GaN enhancement-mode device technology

    International Nuclear Information System (INIS)

    Singisetti, Uttam; Wong, Man Hoi; Mishra, Umesh K

    2013-01-01

    In this paper, we report the recent progress in the high-frequency performance of enhancement-mode devices in the novel N-polar GaN technology and provide a pathway for further scaling. The intrinsic advantages of electron confinement, polarization doping of the back-barrier and the absence of a source barrier in N-polar GaN technology were leveraged with polarization engineering with a top barrier for enhancement mode operation and advanced self-aligned source/drain technology for low parasitic access resistances. The scalability of the device structures are explored in terms of short-channel effects and high-frequency performance. Low-field electron mobility in vertically scaled channel was also investigated providing insights on the scattering mechanism. (invited review)

  11. Providing strong Security and high privacy in low-cost RFID networks

    DEFF Research Database (Denmark)

    David, Mathieu; Prasad, Neeli R.

    2009-01-01

    Since the dissemination of Radio Frequency IDentification (RFID) tags is getting larger and larger, the requirement for strong security and privacy is also increasing. Low-cost and ultra-low-cost tags are being implemented on everyday products, and their limited resources constraints the security...... algorithms to be designed especially for those tags. In this paper, a complete solution providing strong security and high privacy during the whole product lifetime is presented. Combining bit-wise operations and secret keys, the algorithm proposed addresses and solves all the common security attacks....

  12. Perils of providing visual health information overviews for consumers with low health literacy or high stress

    Science.gov (United States)

    Miller, Trudi

    2010-01-01

    This pilot study explores the impact of a health topics overview (HTO) on reading comprehension. The HTO is generated automatically based on the presence of Unified Medical Language System terms. In a controlled setting, we presented health texts and posed 15 questions for each. We compared performance with and without the HTO. The answers were available in the text, but not always in the HTO. Our study (n=48) showed that consumers with low health literacy or high stress performed poorly when the HTO was available without linking directly to the answer. They performed better with direct links in the HTO or when the HTO was not available at all. Consumers with high health literacy or low stress performed better regardless of the availability of the HTO. Our data suggests that vulnerable consumers relied solely on the HTO when it was available and were misled when it did not provide the answer. PMID:20190068

  13. Incorporating spectroscopy and measurement technology into the high school chemistry laboratory

    Science.gov (United States)

    Harbert, Emily Ann

    Science and technology are becoming increasingly important in maintaining a healthy economy at home and a competitive edge on the world stage, though that is just one facet affected by inadequate science education in the United States. Engaging students in the pursuit of knowledge and giving them the skills to think critically are paramount. One small way to assist in achieving these goals is to increase the quality and variety of technology-rich activities conducted in high school classrooms. Incorporating more laboratory measurement technology into high schools may incite more student interest in the processes and practices of science and may allow students to learn to think more critically about their data and what it represents. The first objective of the work described herein was to determine what measurement technology is being used in schools and to what extent, as well as to determine other teacher needs and preferences. Second, the objective was to develop a new program to provide incoming freshmen (or rising seniors) with measurement technology training they did not receive in high school, and expose them to new research and career opportunities in science. The final objective was to create a technology-rich classroom laboratory activity for use in high schools.

  14. Single-tooth anesthesia: pressure-sensing technology provides innovative advancement in the field of dental local anesthesia.

    Science.gov (United States)

    Hochman, Mark N

    2007-04-01

    This article will review standard techniques for intraligamentary injection and describe the technology and technique behind a new single-tooth anesthesia system. This system and technique represents a technological advancement and a greater understanding of intraligamentary anesthesia.

  15. Order no 000039/M/DIRCAB/PRN from December 03,2014 provides for the organisation of the high Nigerian Autority of the Atomic Energy

    International Nuclear Information System (INIS)

    Saidou, Sidibe

    2014-01-01

    this Order provides for the organization of the high Nigerian authority to the atomic energy, through this order, the HANEA understands five (5) Departments to know: - Department safety and nuclear security -department nuclear Applications -department electronucleair -department formation and research concerning sciences and nuclear technologies -department in charge of the OTICE [fr

  16. Development of technology of high density LEU dispersion fuel fabrication

    International Nuclear Information System (INIS)

    Wiencek, T.; Totev, T.

    2007-01-01

    Advanced Materials Fabrication Facilities at Argonne National Laboratory have been involved in development of LEU dispersion fuel for research and test reactors from the beginning of RERTR program. This paper presents development of technology of high density LEU dispersion fuel fabrication for full size plate type fuel elements. A brief description of Advanced Materials Fabrication Facilities where development of the technology was carried out is given. A flow diagram of the manufacturing process is presented. U-Mo powder was manufactured by the rotating electrode process. The atomization produced a U-Mo alloy powder with a relatively uniform size distribution and a nearly spherical shape. Test plates were fabricated using tungsten and depleted U-7 wt.% Mo alloy, 4043 Al and Al-2 wt% Si matrices with Al 6061 aluminum alloy for the cladding. During the development of the technology of manufacturing of full size high density LEU dispersion fuel plates special attention was paid to meet the required homogeneity, bonding, dimensions, fuel out of zone and other mechanical characteristics of the plates.

  17. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

    Science.gov (United States)

    Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

    2017-01-01

    Introduction: There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients. PMID:29042851

  18. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider.

    Science.gov (United States)

    Douglas, Heather E; Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

    2017-04-10

    There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

  19. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

    Directory of Open Access Journals (Sweden)

    Heather E Douglas

    2017-04-01

    Full Text Available Introduction: There is limited evidence of the benefits of information and communication technology (ICT to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

  20. Quality of information about success rates provided on assisted reproductive technology clinic websites in Australia and New Zealand.

    Science.gov (United States)

    Hammarberg, Karin; Prentice, Tess; Purcell, Isabelle; Johnson, Louise

    2017-11-12

    Many factors influence the chance of having a baby with assisted reproductive technologies (ART). A 2016 Australian Competition and Consumer Commission (ACCC) investigation concluded that ART clinics needed to improve the quality of information they provide about chance of ART success. To evaluate changes in the quality of information about success rates provided on the websites of ART clinics in Australia and New Zealand before and after the ACCC investigation. Desktop audits of websites of ART clinics in Australia and New Zealand were conducted in 2016 and 2017 and available information about success rates was scored using a matrix with eight variables and a possible range of scores of 0-9. Of the 54 clinic websites identified in 2016, 32 had unique information and were eligible to be audited. Of these, 29 were also eligible to be audited in 2017. While there was a slight improvement in the mean score from 2016 to 2017 (4.93-5.28), this was not statistically significantly different. Of the 29 clinics, 14 had the same score on both occasions, 10 had a higher and five a lower information quality score in 2017. To allow people who consider ART to make informed decisions about treatment they need comprehensive and accurate information about what treatment entails and what the likely outcomes are. As measured by a scoring matrix, most ART clinics had not improved the quality of the information about success rates following the ACCC investigation. © 2017 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

  1. The effectiveness and feasibility of videoconferencing technology to provide evidence-based treatment to rural domestic violence and sexual assault populations.

    Science.gov (United States)

    Hassija, Christina; Gray, Matt J

    2011-05-01

    Although evidence-based treatments for post-traumatic stress disorder (PTSD) have been available for some time, many treatment-seeking trauma survivors are unable to access such services. This is especially the case in remote and rural areas where access to specialists is an exception rather than a rule. Advances in videoconferencing-based technologies are improving rural residents' access to specialized psychological services. However, at present, little is known about the viability and efficacy of providing psychological interventions via distal technologies to individuals who present at rural domestic violence and rape crisis centers. The present study attempts to partially address this void by evaluating, in the context of an uncontrolled trial, the effectiveness and feasibility of providing evidence-based, trauma-focused treatment via videoconferencing to rural survivors of domestic violence and sexual assault. Participants in the present study were clients referred to the Wyoming Trauma Telehealth Treatment Clinic (WTTTC) for psychological services via videoconferencing from distal domestic violence and rape crisis centers located in the state of Wyoming. Fifteen female victims of assaultive violence who received at least four sessions of trauma-focused treatment via videoconferencing-based technology at distal rape and domestic violence crisis centers were included in the present study. Participants completed measures of PTSD and depression symptom severity and client satisfaction. Participants evidenced large reductions on measures of PTSD (d = 1.17) and depression (d = 1.24) symptom severity following treatment via videoconferencing. Additionally, participants reported a high degree of satisfaction with videoconferencing-administered services. Results provide evidence in support of videoconferencing as an effective means to provide psychological services to rural domestic violence and sexual assault populations. Clinical implications and avenues

  2. Powder technological vitrification of simulated high-level waste

    International Nuclear Information System (INIS)

    Gahlert, S.

    1988-03-01

    High-level waste simulate from the reprocessing of light water reactor and fast breeder fuel was vitrified by powder technology. After denitration with formaldehyde, the simulated HLW is mixed with glass frit and simultaneously dried in an oil-heated mixer. After 'in-can calcination' for at least 24 hours at 850 or 950 K (depending on the type of waste and glass), the mixture is hot-pressed in-can for several hours at 920 or 1020 K respectively, at pressures between 0.4 and 1.0 MPa. The technology has been demonstrated inactively up to diameters of 30 cm. Leach resistance is significantly enhanced when compared to common borosilicate glasses by the utilization of glasses with higher silicon and aluminium content and lower sodium content. (orig.) [de

  3. Advanced power flow technologies for high current ICF accelerators

    International Nuclear Information System (INIS)

    VanDevender, J.P.; McDaniel, D.H.

    1978-01-01

    Two new technologies for raising the power density in high current, inertial confinement fusion accelerators have been developed in the past two years. Magnetic flashover inhibition utilizes the self-magnetic fields around the vacuum insulator surface to inhibit surface flashover; average electric fields of 40 Mv/m at magnetic fields of 1.1 T have been achieved. Self-magnetic insulation of long, vacuum transmission lines has been used to transport power at 1.6 x 10 14 W/m 2 over six meters and up to 1.6 x 10 15 W/m 2 over short distances in a radial anode-cathode feed. The recent data relevant to these new technologies and their implications for ICF will be explored

  4. High-energy liquid jet technology - risk assessment in practice.

    Science.gov (United States)

    Hlaváčová, Irena M; Mulicka, Iwona

    2012-09-01

    The contribution deals with a risk assessment in practical applications of the high-energy liquid jet technology from the point of view of the risk identification, estimation and evaluation. Differences between three different types of workplaces are highlighted and analysed - the indoor, the outdoor and the research ones. Theoretical analyses are supported by particular application of the method for the risk assessment in the Laboratory of Liquid Jets at the VŠB - Technical University of Ostrava. This laboratory is primarily oriented to research. Nevertheless, the conclusions can be used also for predominantly commercial workplaces. Some new considerations and evaluations concerning health and safety are presented. Failure Mode and Effect Analysis (FMEA) procedures were applied and their limitations in risk assessment of water jet-based technologies are explained.

  5. Defining the essential anatomical coverage provided by military body armour against high energy projectiles.

    Science.gov (United States)

    Breeze, John; Lewis, E A; Fryer, R; Hepper, A E; Mahoney, Peter F; Clasper, Jon C

    2016-08-01

    Body armour is a type of equipment worn by military personnel that aims to prevent or reduce the damage caused by ballistic projectiles to structures within the thorax and abdomen. Such injuries remain the leading cause of potentially survivable deaths on the modern battlefield. Recent developments in computer modelling in conjunction with a programme to procure the next generation of UK military body armour has provided the impetus to re-evaluate the optimal anatomical coverage provided by military body armour against high energy projectiles. A systematic review of the literature was undertaken to identify those anatomical structures within the thorax and abdomen that if damaged were highly likely to result in death or significant long-term morbidity. These structures were superimposed upon two designs of ceramic plate used within representative body armour systems using a computerised representation of human anatomy. Those structures requiring essential medical coverage by a plate were demonstrated to be the heart, great vessels, liver and spleen. For the 50th centile male anthropometric model used in this study, the front and rear plates from the Enhanced Combat Body Armour system only provide limited coverage, but do fulfil their original requirement. The plates from the current Mark 4a OSPREY system cover all of the structures identified in this study as requiring coverage except for the abdominal sections of the aorta and inferior vena cava. Further work on sizing of plates is recommended due to its potential to optimise essential medical coverage. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  6. Revisit of Energy Use and Technologies of High Performance Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Li, Cheng; Hong, Tianzhen

    2014-03-30

    Energy consumed by buildings accounts for one third of the world?s total primary energy use. Associated with the conscious of energy savings in buildings, High Performance Buildings (HPBs) has surged across the world, with wide promotion and adoption of various performance rating and certification systems. It is valuable to look into the actual energy performance of HPBs and to understand their influencing factors. To shed some light on this topic, this paper conducted a series of portfolio analysis based on a database of 51 high performance office buildings across the world. Analyses showed that the actual site Energy Use Intensity (EUI) of the 51 buildings varied by a factor of up to 11, indicating a large scale of variation of the actual energy performance of the current HPBs. Further analysis of the correlation between EUI and climate elucidated ubiquitous phenomenon of EUI scatter throughout all climate zones, implying that the weather is not a decisive factor, although important, for the actual energy consumption of an individual building. On the building size via EUI, analysis disclosed that smaller buildings have a tendency to achieving lower energy use. Even so, the correlation is not absolute since some large buildings demonstrated low energy use while some small buildings performed opposite. Concerning the technologies, statistics indicated that the application of some technologies had correlations with some specific building size and climate characteristic. However, it was still hard to pinpoint a set of technologies which was directly correlative with a group of low EUI buildings. It is concluded that no a single factor essentially determines the actual energy performance of HPBs. To deliver energy-efficient buildings, an integrated design taking account of climate, technology, occupant behavior as well as operation and maintenance should be implemented.

  7. Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju Won; Kim, Jae Hun; Choi, Jong Il

    2010-04-15

    This study was studied to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering were developed. Irradiation condition to destroy radiation resistant food borne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources were developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not were developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin were developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam were introduced. Results from this research project, the followings are expected. (1) Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. (2) Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of food borne outbreaks. (3) Build of SPS/TBT system against imported products and acceleration of domestic product export

  8. Development of radiation fusion technology with food technology by the application of high dose irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Juwoon; Kim, Jaehun; Choi, Jongil; and others

    2012-04-15

    This study was performed to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering was developed. Irradiation condition to destroy radiation resistant foodborne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources was developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not was developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin was developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam was introduced. Results from this research project, the followings are expected. Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of foodborne outbreaks. Build of SPS/TBT system against imported products and acceleration of domestic product export. Systemized

  9. Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation

    International Nuclear Information System (INIS)

    Kim, Ju Won; Kim, Jae Hun; Choi, Jong Il

    2010-04-01

    This study was studied to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering were developed. Irradiation condition to destroy radiation resistant food borne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources were developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not were developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin were developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam were introduced. Results from this research project, the followings are expected. (1) Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. (2) Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of food borne outbreaks. (3) Build of SPS/TBT system against imported products and acceleration of domestic product export

  10. Development of radiation fusion technology with food technology by the application of high dose irradiation

    International Nuclear Information System (INIS)

    Lee, Juwoon; Kim, Jaehun; Choi, Jongil

    2012-04-01

    This study was performed to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering was developed. Irradiation condition to destroy radiation resistant foodborne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources was developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not was developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin was developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam was introduced. Results from this research project, the followings are expected. Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of foodborne outbreaks. Build of SPS/TBT system against imported products and acceleration of domestic product export. Systemized

  11. Providing high-quality care in primary care settings: how to make trade-offs.

    Science.gov (United States)

    Beaulieu, Marie-Dominique; Geneau, Robert; Del Grande, Claudio; Denis, Jean-Louis; Hudon, Eveline; Haggerty, Jeannie L; Bonin, Lucie; Duplain, Réjean; Goudreau, Johanne; Hogg, William

    2014-05-01

    To gain a deeper understanding of how primary care (PC) practices belonging to different models manage resources to provide high-quality care. Multiple-case study embedded in a cross-sectional study of a random sample of 37 practices. Three regions of Quebec. Health care professionals and staff of 5 PC practices. Five cases showing above-average results on quality-of-care indicators were purposefully selected to contrast on region, practice size, and PC model. Data were collected using an organizational questionnaire; the Team Climate Inventory, which was completed by health care professionals and staff; and 33 individual interviews. Detailed case histories were written and thematic analysis was performed. The core common feature of these practices was their ongoing effort to make trade-offs to deliver services that met their vision of high-quality care. These compromises involved the same 3 areas, but to varying degrees depending on clinic characteristics: developing a shared vision of high-quality care; aligning resource use with that vision; and balancing professional aspirations and population needs. The leadership of the physician lead was crucial. The external environment was perceived as a source of pressure and dilemmas rather than as a source of support in these matters. Irrespective of their models, PC practices' pursuit of high-quality care is based on a vision in which accessibility is a key component, balanced by appropriate management of available resources and of external environment expectations. Current PC reforms often create tensions rather than support PC practices in their pursuit of high-quality care. Copyright© the College of Family Physicians of Canada.

  12. 7th International Topical Meeting on High Temperature Reactor Technology: The modular HTR is advancing towards reality. Papers and Presentations

    International Nuclear Information System (INIS)

    2014-01-01

    HTR2014 aimed at providing an international platform for researchers, engineers and industrial professionals to share their innovative ideas, valuable experience and recent progresses on high temperature gas-cooled reactor (HTR) and its application technologies.

  13. Using virtual human technology to provide immediate feedback about participants' use of demographic cues and knowledge of their cue use.

    Science.gov (United States)

    Wandner, Laura D; Letzen, Janelle E; Torres, Calia A; Lok, Benjamin; Robinson, Michael E

    2014-11-01

    Demographic characteristics have been found to influence pain management decisions, but limited focus has been placed on participants' reactions to feedback about their use of sex, race, or age to make these decisions. The present study aimed to examine the effects of providing feedback about the use of demographic cues to participants making pain management decisions. Participants (N = 107) viewed 32 virtual human patients with standardized levels of pain and provided ratings for virtual humans' pain intensity and their treatment decisions. Real-time lens model idiographic analyses determined participants' decision policies based on cues used. Participants were subsequently informed about cue use and completed feedback questions. Frequency analyses were conducted on responses to these questions. Between 7.4 and 89.4% of participants indicated awareness of their use of demographic or pain expression cues. Of those individuals, 26.9 to 55.5% believed this awareness would change their future clinical decisions, and 66.6 to 75.9% endorsed that their attitudes affect their imagined clinical practice. Between 66.6 and 79.1% of participants who used cues reported willingness to complete an online tutorial about pain across demographic groups. This study was novel because it provided participants feedback about their cue use. Most participants who used cues indicated willingness to participate in an online intervention, suggesting this technology's utility for modifying biases. This is the first study to make individuals aware of whether a virtual human's sex, race, or age influences their decision making. Findings suggest that a majority of the individuals who were made aware of their use of demographic cues would be willing to participate in an online intervention. Copyright © 2014 American Pain Society. Published by Elsevier Inc. All rights reserved.

  14. Epidemiology of tuberculosis in a high HIV prevalence population provided with enhanced diagnosis of symptomatic disease.

    Directory of Open Access Journals (Sweden)

    Elizabeth L Corbett

    2007-01-01

    Full Text Available Directly observed treatment short course (DOTS, the global control strategy aimed at controlling tuberculosis (TB transmission through prompt diagnosis of symptomatic smear-positive disease, has failed to prevent rising tuberculosis incidence rates in Africa brought about by the HIV epidemic. However, rising incidence does not necessarily imply failure to control tuberculosis transmission, which is primarily driven by prevalent infectious disease. We investigated the epidemiology of prevalent and incident TB in a high HIV prevalence population provided with enhanced primary health care.Twenty-two businesses in Harare, Zimbabwe, were provided with free smear- and culture-based investigation of TB symptoms through occupational clinics. Anonymised HIV tests were requested from all employees. After 2 y of follow-up for incident TB, a culture-based survey for undiagnosed prevalent TB was conducted. A total of 6,440 of 7,478 eligible employees participated. HIV prevalence was 19%. For HIV-positive and -negative participants, the incidence of culture-positive tuberculosis was 25.3 and 1.3 per 1,000 person-years, respectively (adjusted incidence rate ratio = 18.8; 95% confidence interval [CI] = 10.3 to 34.5: population attributable fraction = 78%, and point prevalence after 2 y was 5.7 and 2.6 per 1,000 population (adjusted odds ratio = 1.7; 95% CI = 0.5 to 6.8: population attributable fraction = 14%. Most patients with prevalent culture-positive TB had subclinical disease when first detected.Strategies based on prompt investigation of TB symptoms, such as DOTS, may be an effective way of controlling prevalent TB in high HIV prevalence populations. This may translate into effective control of TB transmission despite high TB incidence rates and a period of subclinical infectiousness in some patients.

  15. Examining the Relationship among High-School Teachers' Technology Self-Efficacy, Attitudes towards Technology Integration, and Quality of Technology Integration

    Science.gov (United States)

    Gonzales, Stacey

    2013-01-01

    This quantitative study explored the relationships among high-school teachers' (n = 74) technology self-efficacy, teachers' attitudes towards technology integration, and quality of teachers' technology integration into instruction. This study offered the unique perspectives of in-service high-school teachers as they have first-hand experience…

  16. Normal accidents living with high-risk technologies

    CERN Document Server

    Perrow, Charles

    1984-01-01

    Normal Accidents analyzes the social side of technological risk. Charles Perrow argues that the conventional engineering approach to ensuring safety--building in more warnings and safeguards--fails because systems complexity makes failures inevitable. He asserts that typical precautions, by adding to complexity, may help create new categories of accidents. (At Chernobyl, tests of a new safety system helped produce the meltdown and subsequent fire.) By recognizing two dimensions of risk--complex versus linear interactions, and tight versus loose coupling--this book provides a powerful framework for analyzing risks and the organizations that insist we run them.

  17. High friction on ice provided by elastomeric fiber composites with textured surfaces

    Science.gov (United States)

    Rizvi, R.; Naguib, H.; Fernie, G.; Dutta, T.

    2015-03-01

    Two main applications requiring high friction on ice are automobile tires and footwear. The main motivation behind the use of soft rubbers in these applications is the relatively high friction force generated between a smooth rubber contacting smooth ice. Unfortunately, the friction force between rubber and ice is very low at temperatures near the melting point of ice and as a result we still experience automobile accidents and pedestrian slips and falls in the winter. Here, we report on a class of compliant fiber-composite materials with textured surfaces that provide outstanding coefficients of friction on wet ice. The fibrous composites consist of a hard glass-fiber phase reinforcing a compliant thermoplastic polyurethane matrix. The glass-fiber phase is textured such that it is aligned transversally and protruding out of the elastomer surface. Our analysis indicates that the exposed fiber phase exhibits a "micro-cleat" effect, allowing for it to fracture the ice and increase the interfacial contact area thereby requiring a high force to shear the interface.

  18. Whole Genome Profiling provides a robust framework for physical mapping and sequencing in the highly complex and repetitive wheat genome

    Directory of Open Access Journals (Sweden)

    Philippe Romain

    2012-01-01

    Full Text Available Abstract Background Sequencing projects using a clone-by-clone approach require the availability of a robust physical map. The SNaPshot technology, based on pair-wise comparisons of restriction fragments sizes, has been used recently to build the first physical map of a wheat chromosome and to complete the maize physical map. However, restriction fragments sizes shared randomly between two non-overlapping BACs often lead to chimerical contigs and mis-assembled BACs in such large and repetitive genomes. Whole Genome Profiling (WGP™ was developed recently as a new sequence-based physical mapping technology and has the potential to limit this problem. Results A subset of the wheat 3B chromosome BAC library covering 230 Mb was used to establish a WGP physical map and to compare it to a map obtained with the SNaPshot technology. We first adapted the WGP-based assembly methodology to cope with the complexity of the wheat genome. Then, the results showed that the WGP map covers the same length than the SNaPshot map but with 30% less contigs and, more importantly with 3.5 times less mis-assembled BACs. Finally, we evaluated the benefit of integrating WGP tags in different sequence assemblies obtained after Roche/454 sequencing of BAC pools. We showed that while WGP tag integration improves assemblies performed with unpaired reads and with paired-end reads at low coverage, it does not significantly improve sequence assemblies performed at high coverage (25x with paired-end reads. Conclusions Our results demonstrate that, with a suitable assembly methodology, WGP builds more robust physical maps than the SNaPshot technology in wheat and that WGP can be adapted to any genome. Moreover, WGP tag integration in sequence assemblies improves low quality assembly. However, to achieve a high quality draft sequence assembly, a sequencing depth of 25x paired-end reads is required, at which point WGP tag integration does not provide additional scaffolding value

  19. The application of the high throughput sequencing technology in the transposable elements.

    Science.gov (United States)

    Liu, Zhen; Xu, Jian-hong

    2015-09-01

    High throughput sequencing technology has dramatically improved the efficiency of DNA sequencing, and decreased the costs to a great extent. Meanwhile, this technology usually has advantages of better specificity, higher sensitivity and accuracy. Therefore, it has been applied to the research on genetic variations, transcriptomics and epigenomics. Recently, this technology has been widely employed in the studies of transposable elements and has achieved fruitful results. In this review, we summarize the application of high throughput sequencing technology in the fields of transposable elements, including the estimation of transposon content, preference of target sites and distribution, insertion polymorphism and population frequency, identification of rare copies, transposon horizontal transfers as well as transposon tagging. We also briefly introduce the major common sequencing strategies and algorithms, their advantages and disadvantages, and the corresponding solutions. Finally, we envision the developing trends of high throughput sequencing technology, especially the third generation sequencing technology, and its application in transposon studies in the future, hopefully providing a comprehensive understanding and reference for related scientific researchers.

  20. Space Photovoltaic Research and Technology, 1988. High Efficiency, Space Environment, and Array Technology

    Science.gov (United States)

    1989-01-01

    The 9th Space Photovoltaic Research and Technology conference was held at the NASA Lewis Research Center from April 19 to 21, 1988. The papers and workshop summaries report remarkable progress on a wide variety of approaches in space photovoltaics, for both near and far term applications. Among the former is the recently developed high efficiency GaAs/Ge cell, which formed the focus of a workshop discussion on heteroepitaxial cells. Still aimed at the long term, but with a significant payoff in a new mission capability, are InP cells, with their potentially dramatic improvement in radiation resistance. Approaches to near term, array specific powers exceeding 130 W/kg are also reported, and advanced concentrator panel technology with the potential to achieve over 250 W/sq m is beginning to take shape.

  1. Development of structural technology for a high performance spacer grid

    International Nuclear Information System (INIS)

    Song, Kee Nam; Kim, H. K.; Kang, H. S.

    2003-03-01

    A spacer grid in a LWR fuel assembly is a key structural component to support fuel rods and to enhance the heat transfer from the fuel rod to the coolant. In this research, the main research items are the development of inherent and high performance spacer grid shapes, the establishment of mechanical/structural analysis and test technology, and the set-up of basic test facilities for the spacer grid. The main research areas and results are as follows. 1. 14 different spacer grid candidates have been invented and applied for domestic and US patents. Among the candidates six are chosen from the patent. 2. Two kinds of spacer grids are finally selected for the advanced LWR fuel after detailed performance tests on the candidates and commercial spacer grids from a mechanical/structural point of view. According to the test results the features of the selected spacer grids are better than those of the commercial spacer grids. 3. Four kinds of basic test facilities are set up and the relevant test technologies are established. 4. Mechanical/structural analysis models and technology for spacer grid performance are developed and the analysis results are compared with the test results to enhance the reliability of the models

  2. Genetic data provide evidence for wind-mediated transmission of highly pathogenic avian influenza.

    Science.gov (United States)

    Ypma, Rolf J F; Jonges, Marcel; Bataille, Arnaud; Stegeman, Arjan; Koch, Guus; van Boven, Michiel; Koopmans, Marion; van Ballegooijen, W Marijn; Wallinga, Jacco

    2013-03-01

    Outbreaks of highly pathogenic avian influenza in poultry can cause severe economic damage and represent a public health threat. Development of efficient containment measures requires an understanding of how these influenza viruses are transmitted between farms. However, the actual mechanisms of interfarm transmission are largely unknown. Dispersal of infectious material by wind has been suggested, but never demonstrated, as a possible cause of transmission between farms. Here we provide statistical evidence that the direction of spread of avian influenza A(H7N7) is correlated with the direction of wind at date of infection. Using detailed genetic and epidemiological data, we found the direction of spread by reconstructing the transmission tree for a large outbreak in the Netherlands in 2003. We conservatively estimate the contribution of a possible wind-mediated mechanism to the total amount of spread during this outbreak to be around 18%.

  3. Sports Cardiology: Core Curriculum for Providing Cardiovascular Care to Competitive Athletes and Highly Active People.

    Science.gov (United States)

    Baggish, Aaron L; Battle, Robert W; Beckerman, James G; Bove, Alfred A; Lampert, Rachel J; Levine, Benjamin D; Link, Mark S; Martinez, Matthew W; Molossi, Silvana M; Salerno, Jack; Wasfy, Meagan M; Weiner, Rory B; Emery, Michael S

    2017-10-10

    The last few decades have seen substantial growth in the populations of competitive athletes and highly active people (CAHAP). Although vigorous physical exercise is an effective way to reduce the risk of cardiovascular (CV) disease, CAHAP remain susceptible to inherited and acquired CV disease, and may be most at risk for adverse CV outcomes during intense physical activity. Traditionally, multidisciplinary teams comprising athletic trainers, physical therapists, primary care sports medicine physicians, and orthopedic surgeons have provided clinical care for CAHAP. However, there is increasing recognition that a care team including qualified CV specialists optimizes care delivery for CAHAP. In recognition of the increasing demand for CV specialists competent in the care of CAHAP, the American College of Cardiology has recently established a Sports and Exercise Council. An important primary objective of this council is to define the essential skills necessary to practice effective sports cardiology. Copyright © 2017. Published by Elsevier Inc.

  4. Technological Challenges for High-Brightness Photo-Injectors

    CERN Multimedia

    Suberlucq, Guy

    2004-01-01

    Many applications, from linear colliders to free-electron lasers, passing through light sources and many other electron sources, require high brightness electron beams, usually produced by photo-injectors. Because certain parameters of these applications differ by several orders of magnitude, various solutions were implemented for the design and construction of the three main parts of the photo-injectors: lasers, photocathodes and guns. This paper summarizes the different requirements, how they lead to technological challenges and how R&D programs try to overcome these challenges. Some examples of state-of-the-art parts are presented.

  5. High-performance silicon photonics technology for telecommunications applications

    International Nuclear Information System (INIS)

    Yamada, Koji; Tsuchizawa, Tai; Nishi, Hidetaka; Kou, Rai; Hiraki, Tatsurou; Takeda, Kotaro; Fukuda, Hiroshi; Yamamoto, Tsuyoshi; Ishikawa, Yasuhiko; Wada, Kazumi

    2014-01-01

    By way of a brief review of Si photonics technology, we show that significant improvements in device performance are necessary for practical telecommunications applications. In order to improve device performance in Si photonics, we have developed a Si-Ge-silica monolithic integration platform, on which compact Si-Ge–based modulators/detectors and silica-based high-performance wavelength filters are monolithically integrated. The platform features low-temperature silica film deposition, which cannot damage Si-Ge–based active devices. Using this platform, we have developed various integrated photonic devices for broadband telecommunications applications. (review)

  6. High-performance silicon photonics technology for telecommunications applications.

    Science.gov (United States)

    Yamada, Koji; Tsuchizawa, Tai; Nishi, Hidetaka; Kou, Rai; Hiraki, Tatsurou; Takeda, Kotaro; Fukuda, Hiroshi; Ishikawa, Yasuhiko; Wada, Kazumi; Yamamoto, Tsuyoshi

    2014-04-01

    By way of a brief review of Si photonics technology, we show that significant improvements in device performance are necessary for practical telecommunications applications. In order to improve device performance in Si photonics, we have developed a Si-Ge-silica monolithic integration platform, on which compact Si-Ge-based modulators/detectors and silica-based high-performance wavelength filters are monolithically integrated. The platform features low-temperature silica film deposition, which cannot damage Si-Ge-based active devices. Using this platform, we have developed various integrated photonic devices for broadband telecommunications applications.

  7. Fluoride Salt-Cooled High-Temperature Reactor Technology Development and Demonstration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Flanagan, George F [ORNL; Mays, Gary T [ORNL; Pointer, William David [ORNL; Robb, Kevin R [ORNL; Yoder Jr, Graydon L [ORNL

    2013-11-01

    Fluoride salt-cooled High-temperature Reactors (FHRs) are an emerging reactor class with potentially advantageous performance characteristics, and fully passive safety. This roadmap describes the principal remaining FHR technology challenges and the development path needed to address the challenges. This roadmap also provides an integrated overview of the current status of the broad set of technologies necessary to design, evaluate, license, construct, operate, and maintain FHRs. First-generation FHRs will not require any technology breakthroughs, but do require significant concept development, system integration, and technology maturation. FHRs are currently entering early phase engineering development. As such, this roadmap is not as technically detailed or specific as would be the case for a more mature reactor class. The higher cost of fuel and coolant, the lack of an approved licensing framework, the lack of qualified, salt-compatible structural materials, and the potential for tritium release into the environment are the most obvious issues that remain to be resolved.

  8. Advancement of High Temperature Black Liquor Gasification Technology

    Energy Technology Data Exchange (ETDEWEB)

    Craig Brown; Ingvar Landalv; Ragnar Stare; Jerry Yuan; Nikolai DeMartini; Nasser Ashgriz

    2008-03-31

    Weyerhaeuser operates the world's only commercial high-temperature black liquor gasifier at its pulp mill in New Bern, NC. The unit was started-up in December 1996 and currently processes about 15% of the mill's black liquor. Weyerhaeuser, Chemrec AB (the gasifier technology developer), and the U.S. Department of Energy recognized that the long-term, continuous operation of the New Bern gasifier offered a unique opportunity to advance the state of high temperature black liquor gasification toward the commercial-scale pressurized O2-blown gasification technology needed as a foundation for the Forest Products Bio-Refinery of the future. Weyerhaeuser along with its subcontracting partners submitted a proposal in response to the 2004 joint USDOE and USDA solicitation - 'Biomass Research and Development Initiative'. The Weyerhaeuser project 'Advancement of High Temperature Black Liquor Gasification' was awarded USDOE Cooperative Agreement DE-FC26-04NT42259 in November 2004. The overall goal of the DOE sponsored project was to utilize the Chemrec{trademark} black liquor gasification facility at New Bern as a test bed for advancing the development status of molten phase black liquor gasification. In particular, project tasks were directed at improvements to process performance and reliability. The effort featured the development and validation of advanced CFD modeling tools and the application of these tools to direct burner technology modifications. The project also focused on gaining a fundamental understanding and developing practical solutions to address condensate and green liquor scaling issues, and process integration issues related to gasifier dregs and product gas scrubbing. The Project was conducted in two phases with a review point between the phases. Weyerhaeuser pulled together a team of collaborators to undertake these tasks. Chemrec AB, the technology supplier, was intimately involved in most tasks, and focused primarily on the

  9. Streamlined circular proximity ligation assay provides high stringency and compatibility with low-affinity antibodies.

    Science.gov (United States)

    Jalili, Roxana; Horecka, Joe; Swartz, James R; Davis, Ronald W; Persson, Henrik H J

    2018-01-30

    Proximity ligation assay (PLA) is a powerful tool for quantitative detection of protein biomarkers in biological fluids and tissues. Here, we present the circular proximity ligation assay (c-PLA), a highly specific protein detection method that outperforms traditional PLA in stringency, ease of use, and compatibility with low-affinity reagents. In c-PLA, two proximity probes bind to an analyte, providing a scaffolding that positions two free oligonucleotides such that they can be ligated into a circular DNA molecule. This assay format stabilizes antigen proximity probe complexes and enhances stringency by reducing the probability of random background ligation events. Circle formation also increases selectivity, since the uncircularized DNA can be removed enzymatically. We compare this method with traditional PLA on several biomarkers and show that the higher stringency for c-PLA improves reproducibility and enhances sensitivity in both buffer and human plasma. The limit of detection ranges from femtomolar to nanomolar concentrations for both methods. Kinetic analyses using surface plasmon resonance (SPR) and biolayer interferometry (BLI) reveal that the variation in limit of detection is due to the variation in antibody affinity and that c-PLA outperforms traditional PLA for low-affinity antibodies. The lower background signal can be used to increase proximity probe concentration while maintaining a high signal-to-noise ratio, thereby enabling the use of low-affinity reagents in a homogeneous assay format. We anticipate that the advantages of c-PLA will be useful in a variety of clinical protein detection applications where high-affinity reagents are lacking.

  10. EnviroTRADE: A technical perspective on the development of an information system providing data on environmental technologies and needs worldwide

    International Nuclear Information System (INIS)

    Harrington, M.W.; Harlan, C.P.

    1992-01-01

    In support of the US Department of Energy's commitment to the remediation of waste sites throughout its complex, the DOE has recognized that it can accelerate its technology development efforts and leverage the expenditure of available funds through an international cooperation among government entities, private industry, and educational institutions. To support the technology transfer of environmental information, the DOE has sponsored the development of EnviroTRADE - an international information system that will facilitate the exchange of environmental restoration and waste management technologies worldwide. The system will contain profiles on both environmental restoration / waste management needs and foreign / domestic technologies. Users will be able to identify matches between worldwide needs and available or emerging technologies. Where matches between needs and existing technologies are not found, the system will identify the potential for development of new and innovative technologies to address environmental problems. EnviroTRADE will also provide general information on international environmental restoration and waste management organizations, sites, activities, and contacts

  11. Hybrid Cooling Loop Technology for Robust High Heat Flux Cooling Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Cooling Technologies, Inc. proposes to develop a hybrid cooling loop technology for space thermal control. The proposed technology combines the high heat...

  12. Department of Nuclear Equipment 'High Technology Center - HITEC' - Overview

    International Nuclear Information System (INIS)

    Kopec, J.

    2009-01-01

    Full text: The main activities of the Department for Nuclear Equipment High Technology Centre in 2008 were focused on the development of specialized systems using linear accelerators for medical applications, realized within the frame of the Innovative Economy Operational Program: · Calculations, simulations and design of accelerator structures and beam shaping devices · Design of a model of carrying structures · Building stands for carrying out critical component examinations and tests A new evolutionary algorithm has been implemented in a three-dimensional treatment planning system for intensity modulated radiotherapy (IMRT) planning optimization. A design for a multi leaf collimator, second model, was worked out. The Department received an Award for the Polkam TBI therapeutic table in the first edition of the '' Teraz-Polska '' national contest for the best Polish innovative product. Equipment manufactured by the High Technology Centre and especially for total body irradiation techniques was presented for the first time during the Biennial Meeting of the European Society for Therapeutic Radiology and Oncology in Goeteborg, Sweden. The second edition of the School of Medical Accelerator Physics organized in October 2008 was well received by medical physicists and physicians. (author)

  13. Application of high precision temperature control technology in infrared testing

    Science.gov (United States)

    Cao, Haiyuan; Cheng, Yong; Zhu, Mengzhen; Chu, Hua; Li, Wei

    2017-11-01

    In allusion to the demand of infrared system test, the principle of Infrared target simulator and the function of the temperature control are presented. The key technology of High precision temperature control is discussed, which include temperature gathering, PID control and power drive. The design scheme of temperature gathering is put forward. In order to reduce the measure error, discontinuously current and four-wire connection for the platinum thermal resistance are adopted. A 24-bits AD chip is used to improve the acquisition precision. Fuzzy PID controller is designed because of the large time constant and continuous disturbance of the environment temperature, which result in little overshoot, rapid response, high steady-state accuracy. Double power operational amplifiers are used to drive the TEC. Experiments show that the key performances such as temperature control precision and response speed meet the requirements.

  14. Structural analysis technology for high-temperature design

    International Nuclear Information System (INIS)

    Greenstreet, W.L.

    1977-01-01

    Results from an ongoing program devoted to the development of verified high-temperature structural design technology applicable to nuclear reactor systems are described. The major aspects addressed by the program are (1) deformation behavior; (2) failure associated with creep rupture, brittle fracture, fatigue, creep-fatigue interactions, and crack propagation; and (3) the establishment of appropriate design criteria. This paper discusses information developed in the deformation behavior category. The material considered is type 304 stainless steel, and the temperatures range to 1100 0 F (593 0 C). In essence, the paper considers the ingredients necessary for predicting relatively high-temperature inelastic deformation behavior of engineering structures under time-varying temperature and load conditions and gives some examples. These examples illustrate the utility and acceptability of the computational methods identified and developed for prediting essential features of complex inelastic behaviors. Conditions and responses that can be encountered under nuclear reactor service conditions and invoked in the examples. (Auth.)

  15. High temperature solar thermal technology: The North Africa Market

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    High temperature solar thermal (HTST) technology offers an attractive option for both industrialized and non-industrialized countries to generate electricity and industrial process steam. The purpose of this report is to assess the potential market for solar thermal applications in the North African countries of Algeria, Egypt, Morocco and Tunisia. North Africa was selected because of its outstanding solar resource base and the variety of applications to be found there. Diminishing oil and gas resources, coupled with expanding energy needs, opens a large potential market for the US industry. The US high temperature solar trough industry has little competition globally and could build a large market in these areas. The US is already familiar with certain solar markets in North Africa due to the supplying of substantial quantities of US-manufactured flat plate collectors to this region.

  16. Sliver Solar Cells: High-Efficiency, Low-Cost PV Technology

    Directory of Open Access Journals (Sweden)

    Evan Franklin

    2007-01-01

    Full Text Available Sliver cells are thin, single-crystal silicon solar cells fabricated using standard fabrication technology. Sliver modules, composed of several thousand individual Sliver cells, can be efficient, low-cost, bifacial, transparent, flexible, shadow tolerant, and lightweight. Compared with current PV technology, mature Sliver technology will need 10% of the pure silicon and fewer than 5% of the wafer starts per MW of factory output. This paper deals with two distinct challenges related to Sliver cell and Sliver module production: providing a mature and robust Sliver cell fabrication method which produces a high yield of highly efficient Sliver cells, and which is suitable for transfer to industry; and, handling, electrically interconnecting, and encapsulating billions of sliver cells at low cost. Sliver cells with efficiencies of 20% have been fabricated at ANU using a reliable, optimised processing sequence, while low-cost encapsulation methods have been demonstrated using a submodule technique.

  17. Application of new technologies for characterization of Hanford Site high-level waste

    Energy Technology Data Exchange (ETDEWEB)

    Winters, W.I.

    1998-02-03

    To support remediation of Hanford Site high-level radioactive waste tanks, new chemical and physical measurement technologies must be developed and deployed. This is a major task of the Chemistry Analysis Technology Support (CATS) group of the Hanford Corporation. New measurement methods are required for efficient and economical resolution of tank waste safety, waste retrieval, and disposal issues. These development and deployment activities are performed in cooperation with Waste Management Federal Services of Hanford, Inc. This paper provides an overview of current analytical technologies in progress. The high-level waste at the Hanford Site is chemically complex because of the numerous processes used in past nuclear fuel reprocessing there, and a variety of technologies is required for effective characterization. Programmatic and laboratory operational needs drive the selection of new technologies for characterizing Hanford Site high-level waste, and these technologies are developed for deployment in laboratories, hot cells or in the field. New physical methods, such as the propagating reactive systems screening tool (PRSST) to measure the potential for self-propagating reactions in stored wastes, are being implemented. Technology for sampling and measuring gases trapped within the waste matrix is being used to evaluate flammability hazards associated with gas releases from stored wastes. Application of new inductively coupled plasma and laser ablation mass spectrometry systems at the Hanford Site`s 222-S Laboratory will be described. A Raman spectroscopy probe mounted in a cone penetrometer to measure oxyanions in wastes or soils will be described. The Hanford Site has used large volumes of organic complexants and acids in processing waste, and capillary zone electrophoresis (CZE) methods have been developed for determining several of the major organic components in complex waste tank matrices. The principles involved, system installation, and results from

  18. Technology for High Pure Aluminum Oxide Production from Aluminum Scrap

    Science.gov (United States)

    Ambaryan, G. N.; Vlaskin, M. S.; Shkolnikov, E. I.; Zhuk, A. Z.

    2017-10-01

    In this study a simple ecologically benign technology of high purity alumina production is presented. The synthesis process consists of three steps) oxidation of aluminum in water at temperature of 90 °C) calcinations of Al hydroxide in atmosphere at 1100 °C) high temperature vacuum processing of aluminum alpha oxide at 1750 °C. Oxidation of aluminum scrap was carried out under intensive mixing in water with small addition of KOH as a catalyst. It was shown that under implemented experimental conditions alkali was continuously regenerated during oxidation reaction and synergistic effect of low content alkali aqueous solution and intensive mixing worked. The product of oxidation of aluminum scrap is the powder of Al(OH)3. Then it can be preliminary granulated or directly subjected to thermal treatment deleting the impurities from the product (aluminum oxide). It was shown the possibility to produce the high-purity aluminum oxide of 5N grade (99.999 %). Aluminum oxide, synthesized by means of the proposed method, meets the requirements of industrial manufacturers of synthetic sapphire (aluminum oxide monocrystals). Obtained high pure aluminum oxide can be also used for the manufacture of implants, artificial joints, microscalpels, high-purity ceramics and other refractory shapes for manufacture of ultra-pure products.

  19. Packaging Technologies for High Temperature Electronics and Sensors

    Science.gov (United States)

    Chen, Liangyu; Hunter, Gary W.; Neudeck, Philip G.; Beheim, Glenn M.; Spry, David J.; Meredith, Roger D.

    2013-01-01

    This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500degC silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chiplevel packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550degC. A 96% alumina based edge connector for a PCB level subsystem interconnection has also been demonstrated recently. The 96% alumina packaging system composed of chip-level packages and PCBs has been tested with high temperature SiC devices at 500degC for over 10,000 hours. In addition to tests in a laboratory environment, a SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE-7 suite to the International Space Station via a Shuttle mission. This packaged SiC transistor was successfully tested in orbit for eighteen months. A spark-plug type sensor package designed for high temperature SiC capacitive pressure sensors was developed. This sensor package combines the high temperature interconnection system with a commercial high temperature high pressure stainless steel seal gland (electrical feed-through). Test results of a packaged high temperature capacitive pressure sensor at 500degC are also discussed. In addition to the pressure sensor package, efforts for packaging high temperature SiC diode-based gas chemical sensors are in process.

  20. Technology use among Ghanaian Senior High School mathematics ...

    African Journals Online (AJOL)

    kofi.mereku

    Keywords perceived efficacy; teachers' technology use; technology integration in teaching mathematics. Introduction. A catch phrase in education today is technology integration. The call to integrate. Information and Communication Technology (ICT) in education has become a major concern to Education stakeholders and ...

  1. The fate and management of high mercury-containing lamps from high technology industry.

    Science.gov (United States)

    Chang, T C; You, S J; Yu, B S; Kong, H W

    2007-03-22

    This study investigated the fate and management of high mercury-contained lamps, such as cold cathode fluorescent lamps (CCFLs), ultraviolet lamps (UV lamps), and super high pressure mercury lamps (SHPs), from high technology industries in Taiwan, using material flow analysis (MFA) method. Several organizations, such as Taiwan Environmental Protection Administration, Taiwan External Trade Development Council, the light sources manufactories, mercury-containing lamps importer, high technology industrial user, and waste mercury-containing lamps treatment facilities were interviewed in this study. According to this survey, the total mercury contained in CCFLs, UV lamps, and SHPs produced in Taiwan or imported from other countries was 886kg in year 2004. Among the various lamps containing mercury, 57kg mercury was exported as primary CCFLs, 7kg mercury was wasted as defective CCFLs, and 820kg mercury was used in the high technology industries, including 463kg mercury contained in exported industrial products using CCFLs as components. On the contrary, only 59kg of mercury was exported, including 57kg in CCFLs and 2kg in UV lamps. It reveals that 364kg mercury was consumed in Taiwan during year 2004. In addition, 140kg of the 364kg mercury contained in lamps used by high technology industry was well treated through industrial waste treatment system. Among the waste mercury from high technology industry, 80kg (57%), 53kg (38%), and 7kg (5%) of mercury were through domestic treatment, offshore treatment, and emission in air, respectively. Unfortunately, 224kg waste mercury was not suitable treated, including 199kg mercury contained in CCFL, which is a component of monitor for personal computer and liquid crystal display television, and 25kg non-treated mercury. Thus, how to recover the mercury from the waste monitors is an important challenge of zero wastage policy in Taiwan.

  2. PECULIARITIES OF AN INDIVIDUAL APPROACH TO HIGH SCHOOL STUDENTS MAJORING IN TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Andriy Uruskyi

    2016-05-01

    Full Text Available The features of the methodology of the implementation of an individual approach to high school students majoring in technology are analysed. The main stages of the implementation have been defined as the analysis of the individual student characteristics; grouping 10–11 grade students; usage of the modern informational and communicational techniques and a set of facilities of differentiated studying. The examples of the differentiated tasks for different phases of the high school training such as providing training material by teachers; academic progress monitoring; self-studying materials; fulfilling tasks of practical (laboratory and practical works; goods manufacturing; carrying out creative projects have been provided.

  3. Plant Growth under Natural Light Conditions Provides Highly Flexible Short-Term Acclimation Properties toward High Light Stress

    Science.gov (United States)

    Schumann, Tobias; Paul, Suman; Melzer, Michael; Dörmann, Peter; Jahns, Peter

    2017-01-01

    Efficient acclimation to different growth light intensities is essential for plant fitness. So far, most studies on light acclimation have been conducted with plants grown under different constant light regimes, but more recent work indicated that acclimation to fluctuating light or field conditions may result in different physiological properties of plants. Thale cress (Arabidopsis thaliana) was grown under three different constant light intensities (LL: 25 μmol photons m−2 s−1; NL: 100 μmol photons m−2 s−1; HL: 500 μmol photons m−2 s−1) and under natural fluctuating light (NatL) conditions. We performed a thorough characterization of the morphological, physiological, and biochemical properties focusing on photo-protective mechanisms. Our analyses corroborated the known properties of LL, NL, and HL plants. NatL plants, however, were found to combine characteristics of both LL and HL grown plants, leading to efficient and unique light utilization capacities. Strikingly, the high energy dissipation capacity of NatL plants correlated with increased dynamics of thylakoid membrane reorganization upon short-term acclimation to excess light. We conclude that the thylakoid membrane organization and particularly the light-dependent and reversible unstacking of grana membranes likely represent key factors that provide the basis for the high acclimation capacity of NatL grown plants to rapidly changing light intensities. PMID:28515734

  4. New Potentiometric Wireless Chloride Sensors Provide High Resolution Information on Chemical Transport Processes in Streams

    Directory of Open Access Journals (Sweden)

    Keith Smettem

    2017-07-01

    Full Text Available Quantifying the travel times, pathways, and dispersion of solutes moving through stream environments is critical for understanding the biogeochemical cycling processes that control ecosystem functioning. Validation of stream solute transport and exchange process models requires data obtained from in-stream measurement of chemical concentration changes through time. This can be expensive and time consuming, leading to a need for cheap distributed sensor arrays that respond instantly and record chemical transport at points of interest on timescales of seconds. To meet this need we apply new, low-cost (in the order of a euro per sensor potentiometric chloride sensors used in a distributed array to obtain data with high spatial and temporal resolution. The application here is to monitoring in-stream hydrodynamic transport and dispersive mixing of an injected chemical, in this case NaCl. We present data obtained from the distributed sensor array under baseflow conditions for stream reaches in Luxembourg and Western Australia. The reaches were selected to provide a range of increasingly complex in-channel flow patterns. Mid-channel sensor results are comparable to data obtained from more expensive electrical conductivity meters, but simultaneous acquisition of tracer data at several positions across the channel allows far greater spatial resolution of hydrodynamic mixing processes and identification of chemical ‘dead zones’ in the study reaches.

  5. DJFS: Providing Highly Reliable and High‐Performance File System with Small‐Sized

    Directory of Open Access Journals (Sweden)

    Junghoon Kim

    2017-11-01

    Full Text Available File systems and applications try to implement their own update protocols to guarantee data consistency, which is one of the most crucial aspects of computing systems. However, we found that the storage devices are substantially under‐utilized when preserving data consistency because they generate massive storage write traffic with many disk cache flush operations and force‐unit‐access (FUA commands. In this paper, we present DJFS (Delta‐Journaling File System that provides both a high level of performance and data consistency for different applications. We made three technical contributions to achieve our goal. First, to remove all storage accesses with disk cache flush operations and FUA commands, DJFS uses small‐sized NVRAM for a file system journal. Second, to reduce the access latency and space requirements of NVRAM, DJFS attempts to journal compress the differences in the modified blocks. Finally, to relieve explicit checkpointing overhead, DJFS aggressively reflects the checkpoint transactions to file system area in the unit of the specified region. Our evaluation on TPC‐C SQLite benchmark shows that, using our novel optimization schemes, DJFS outperforms Ext4 by up to 64.2 times with only 128 MB of NVRAM.

  6. Development of High Temperature Capacitor Technology and Manufacturing Capability

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2011-05-15

    The goal of the Development of High Temperature Capacitor Technology and Manufacturing Capability program was to mature a production-ready supply chain for reliable 250°C FPE (fluorinated polyester) film capacitors by 2011. These high-temperature film capacitors enable both the down hole drilling and aerospace industries by enabling a variety of benefits including: - Deeper oil exploration in higher temperature and pressure environments - Enabling power electronic and control equipment to operate in higher temperature environments - Enabling reduced cooling requirements of electronics - Increasing reliability and life of capacitors operating below rated temperature - Enabling capacitors to handle higher electrical losses without overheating. The key challenges to bringing the FPE film capacitors to market have been manufacturing challenges including: - FPE Film is difficult to handle and wind, resulting in poor yields - Voltage breakdown strength decreases when the film is wound into capacitors (~70% decrease) - Encapsulation technologies must be improved to enable higher perature operation - Manufacturing and test cycle time is very long As a direct result of this program most of the manufacturing challenges have been met. The FPE film production metalization and winding yield has increased to over 82% from 70%, and the voltage breakdown strength of the wound capacitors has increased 270% to 189 V/μm. The high temperature packaging concepts are showing significant progress including promising results for lead attachments and hermetic packages at 200°C and non-hermetic packages at 250°C. Manufacturing and test cycle time will decrease as the market for FPE capacitors develops.

  7. TECHNOLOGICAL ELEMENTS OF THE SYSTEM OF STRATEGIC PLANNING AS TOOLS FOR PROVIDING THE ECONOMIC DEVELOPMENT OF THE SERVICES SPHERE

    Directory of Open Access Journals (Sweden)

    V. V. Gromov

    2015-01-01

    Full Text Available Topicality article is to determine the composition of the technological elements of the strategic planning system, the interaction of which is aimed at achieving the planned economic results in the changing factors influence macro microenvironments on the activities of institutions and economic activities of services. The articles structurally is made on the basis of respect for the logical sequence of interactions of technological elements of strategic planning and combat their negative factors of external and internal environment. Active interaction of technological elements of strategic planning tools is to ensure long-term development planning authorities of economic entities, economic activities service sector for sustainable economic growth. Contribution of the author in the scope of this article is to generalize the definition of the target composition and installation of technological elements of strategic planning and development institutions and industry components of the service sector.

  8. A STUDY PAPER HOW LATEST TECHNOLOGIES LIKES TABS AND DIGITAL MEDIA CAN PROVIDE EFFICIENT WAY TO LEARNING AND EDUCATION

    OpenAIRE

    Aditya Jain*, Aditya Sharma, Aditya Singh Baghel, Ambar Pathak

    2016-01-01

    The use of latest trends and technologies in academic research may now be changing with such a frequency in the universities in terms of faculties who teaches and students that learn. Each and every universities wants to not only improve the syllabus but they also want to upgrade their labs with latest use of hardware and software. They are also focusing upon the technological growth of the students and their students can also develop their applications in different zones like traffic managem...

  9. Enabling Business Model Change: Evidence from High-Technology Firms

    Directory of Open Access Journals (Sweden)

    Christiana Müller

    2015-01-01

    Full Text Available Companies today face volatie environments, short product life cycles, and changing customer requirements, which is especially the case in high-technology filds. In such environments, concentratig only on technological and product innovatins is not suffient to gain competiie advantages. Instead, companies need innovatie business models in order to stand out from their competiors. To successfully change business models, companies require appropriate competencies. Thus, the objectie of this research is to identiy how companies can prepare their business model(s to counteract environmental changes flxibly. With the aid of the chosen exploratory, qualitatie research design, we investiate companies operatig in hightechnology branches. In total, 20 companies partiipated in our study. The interviews were conducted with CEOs, vice-presidents, product managers or other managers responsible for business model developments. The research revealed that companies can prepare the business model and its elements ex ante through developing capabilitis in order to raise the flxibility of the business model. These capabilitis have to be developed with regard to several internal and external issues driving these changes.

  10. Technological aspects of high-$T_{c}$ superconductors

    CERN Document Server

    Mamalis, A G

    2000-01-01

    The applications of the dynamic or shock-wave compaction in the area of processing of high-T/sub c/ superconducting materials are presented and discussed. The basic aspects of explosive technology and also the various features of the related experimental techniques are reported. On the other hand, the influence of the shock-wave phenomena on macro-/microstructure and physico-chemical properties of the compacted ceramic, and the quality-performance of the final superconducting component are overviewed for certain industrial applications. Finally, some basic theoretical and empirical models describing the dynamic state of the material under shock and the stress-wave propagation are also included, in order to understand the dominant compaction mechanisms. (44 refs).

  11. Advances in High Temperature Gas Cooled Reactor Fuel Technology

    International Nuclear Information System (INIS)

    2012-06-01

    This publication reports on the results of a coordinated research project on advances in high temperature gas cooled reactor (HTGR) fuel technology and describes the findings of research activities on coated particle developments. These comprise two specific benchmark exercises with the application of HTGR fuel performance and fission product release codes, which helped compare the quality and validity of the computer models against experimental data. The project participants also examined techniques for fuel characterization and advanced quality assessment/quality control. The key exercise included a round-robin experimental study on the measurements of fuel kernel and particle coating properties of recent Korean, South African and US coated particle productions applying the respective qualification measures of each participating Member State. The summary report documents the results and conclusions achieved by the project and underlines the added value to contemporary knowledge on HTGR fuel.

  12. Advances in High Temperature Gas Cooled Reactor Fuel Technology

    International Nuclear Information System (INIS)

    2012-12-01

    This publication reports on the results of a coordinated research project on advances in high temperature gas cooled reactor (HTGR) fuel technology and describes the findings of research activities on coated particle developments. These comprise two specific benchmark exercises with the application of HTGR fuel performance and fission product release codes, which helped compare the quality and validity of the computer models against experimental data. The project participants also examined techniques for fuel characterization and advanced quality assessment/quality control. The key exercise included a round-robin experimental study on the measurements of fuel kernel and particle coating properties of recent Korean, South African and US coated particle productions applying the respective qualification measures of each participating Member State. The summary report documents the results and conclusions achieved by the project and underlines the added value to contemporary knowledge on HTGR fuel.

  13. Response of MOSFETs from DMILL technology to high total doses

    International Nuclear Information System (INIS)

    Armani, J.M.; Brisset, C.; Joffre, F.; Dentan, M.

    1999-01-01

    We have studied the behaviour of MOS transistors with DMILL technology submitted to 60 Co gamma radiation. The cumulated dose was 1 MGy(Si) with a dose rate of 1 kGy(Si). The shift of the threshold voltage for an integrated dose beyond 1 MGy(Si) was less than 0.87 V even in the worst case. The analysis of the results shows that the effects of the traps located at the interface Si-SiO 2 become predominant for doses just over a few hundreds kilo-Gray. The weak shift observed enables DMILL-MOS transistors to be validated in civil nuclear applications where cumulated doses may be high. (A.C.)

  14. Synchrotron accelerator technology for proton beam therapy with high accuracy

    International Nuclear Information System (INIS)

    Hiramoto, Kazuo

    2009-01-01

    Proton beam therapy was applied at the beginning to head and neck cancers, but it is now extended to prostate, lung and liver cancers. Thus the need for a pencil beam scanning method is increasing. With this method radiation dose concentration property of the proton beam will be further intensified. Hitachi group has supplied a pencil beam scanning therapy system as the first one for M. D. Anderson Hospital in United States, and it has been operational since May 2008. Hitachi group has been developing proton therapy system to correspond high-accuracy proton therapy to concentrate the dose in the diseased part which is located with various depths, and which sometimes has complicated shape. The author described here on the synchrotron accelerator technology that is an important element for constituting the proton therapy system. (K.Y.)

  15. Success in large high-technology projects: What really works?

    Science.gov (United States)

    Crosby, P.

    2014-08-01

    Despite a plethora of tools, technologies and management systems, successful execution of big science and engineering projects remains problematic. The sheer scale of globally funded projects such as the Large Hadron Collider and the Square Kilometre Array telescope means that lack of project success can impact both on national budgets, and collaborative reputations. In this paper, I explore data from contemporary literature alongside field research from several current high-technology projects in Europe and Australia, and reveal common `pressure points' that are shown to be key influencers of project control and success. I discuss the how mega-science projects sit between being merely complicated, and chaotic, and explain the importance of understanding multiple dimensions of project complexity. Project manager/leader traits are briefly discussed, including capability to govern and control such enterprises. Project structures are examined, including the challenge of collaborations. I show that early attention to building project resilience, curbing optimism, and risk alertness can help prepare large high-tech projects against threats, and why project managers need to understand aspects of `the silent power of time'. Mission assurance is advanced as a critical success function, alongside the deployment of task forces and new combinations of contingency plans. I argue for increased project control through industrial-style project reviews, and show how post-project reviews are an under-used, yet invaluable avenue of personal and organisational improvement. Lastly, I discuss the avoidance of project amnesia through effective capture of project knowledge, and transfer of lessons-learned to subsequent programs and projects.

  16. Shielding technology for high energy radiation production facility

    International Nuclear Information System (INIS)

    Lee, Byung Chul; Kim, Heon Il

    2004-06-01

    In order to develop shielding technology for high energy radiation production facility, references and data for high energy neutron shielding are searched and collected, and calculations to obtain the characteristics of neutron shield materials are performed. For the evaluation of characteristics of neutron shield material, it is chosen not only general shield materials such as concrete, polyethylene, etc., but also KAERI developed neutron shields of High Density PolyEthylene (HDPE) mixed with boron compound (B 2 O 3 , H 2 BO 3 , Borax). Neutron attenuation coefficients for these materials are obtained for later use in shielding design. The effect of source shape and source angular distribution on the shielding characteristics for several shield materials is examined. This effect can contribute to create shielding concept in case of no detail source information. It is also evaluated the effect of the arrangement of shield materials using current shield materials. With these results, conceptual shielding design for PET cyclotron is performed. The shielding composite using HDPE and concrete is selected to meet the target dose rate outside the composite, and the dose evaluation is performed by configuring the facility room conceptually. From the result, the proper shield configuration for this PET cyclotron is proposed

  17. Evaluating the Economic Performance of High-Technology Industry and Energy Efficiency: A Case Study of Science Parks in Taiwan

    Directory of Open Access Journals (Sweden)

    Min-Ren Yan

    2013-02-01

    Full Text Available High-technology industries provide opportunities for economic growth, but also raise concerns because of their energy-demanding nature. This paper provides an integrated evaluation of both economic benefits and energy efficiency of high-technology industries based on the real data from one of the globally recognized high-technology industrial clusters, the national science parks in Taiwan. A nation-wide industrial Input-Output Analysis is conducted to demonstrate the positive effects of science parks on national economic developments and industrial upgrades. The concept of energy intensity and an energy-efficient economy index are applied to an integrated assessment of the relationship between economic growth and energy consumption. The proposed case study suggests that economic and energy efficiency objectives can be simultaneously achieved by the development of high-technology industries, while three energy policy implications are considered. First, a nation-wide macro viewpoint is needed and high-technology industries should be considered as parts of the national/regional economies by governmental agencies. Second, a proper industrial clustering mechanism and the shared environmental facilities supported by the government, such as planned land and road usage, electricity and water supply, telecommunications system, sewerage system and wastewater treatments, can improve energy efficiency of high-technology industries. Third, the governmental policies on the taxing and management system in science parks would also direct energy-efficient economy of high-technology industries.

  18. Development of High Temperature Superconducting Josephson Junction Device Technology

    National Research Council Canada - National Science Library

    Myers, Kirsten

    1998-01-01

    The DuPont program was successful in generating useful knowledge about thallium cuprate materials, photoresist reflow processing, and radiant heater technology though it did not lead to a new junction technology...

  19. Nanomembranes and soft fabrication methods for high performance, low cost energy technologies

    Science.gov (United States)

    Yao, Yuan; Nuzzo, Ralph G.

    2015-09-01

    The production of integrated electronic circuits provides examples of the most advanced fabrication and assembly approaches that are generally characterized by large-scale integration of high-performance compact semiconductor elements that rely on rigid and essentially planar form factors. New methods of fabricating semiconductor membranes of nanoscale thickness with intrinsic mechanical flexible features are beginning to provide a set of means to lift these constraints by engendering deformable, three-dimensional device configurations that are difficult to achieve with bulkscale materials while retaining capacities for high (or altogether new forms of) electronic and/or optoelectronic performance. Together with enabling means of deterministic assembly realized via the advancing technology of transferprinting, these light-weight nanomembrane elements can be distributed over large areas on a soft, bendable, and even biocompatible secondary substrates with high throughput and yields to realize interesting new functionalities in technology. Exemplary cases include: large-area integrated electro-optical systems laminated onto curvilinear or other 3-D surfaces for use in sensing and imaging with capacities for accommodating demanding forms of mechanical flexure; and unconventional hybrid systems for lighting and photovoltaic energy conversion that provide a potentially transformational approach to supplant current technologies with high performance, low cost alternatives. Taken together, the results of recent research efforts illustrate important opportunities for exploiting advances in materials in synergy with physical means of patterning, fabrication and assembly. In this review, we explore several exemplary applications taken from this work, and specifically highlight scalable approaches to high performance integrated systems for low cost energy technologies.

  20. Novel High Pressure Pump-on-a-Chip Technology, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc. proposes to develop a novel high pressure "pump-on-a-chip" (HPPOC) technology capable of generating high pressure and flow rate on...

  1. Hybrid orientation technology and strain engineering for ultra-high ...

    Indian Academy of Sciences (India)

    We report here RF MOSFET performance in sub-45-nm hybrid orientation CMOS technology. Based on the combination of hybrid orientation technology (HOT) and process-induced local strain engineering,MOSFET RF performance is investigated using CAD (TCAD) technology. Transistor optimization on (100) substrate ...

  2. Teaching and technology: the traits and attitudes of highly rated ...

    African Journals Online (AJOL)

    The emergence of Information and Communications Technology in education, which includes online learning, leads to a 'technological imperative' for institutions of higher learning. A barrier to the successful adoption of online learning is the willingness of lecturers to utilise such technology for learning. In this article we ...

  3. Technology Transfer Challenges for High-Assurance Software Engineering Tools

    Science.gov (United States)

    Koga, Dennis (Technical Monitor); Penix, John; Markosian, Lawrence Z.

    2003-01-01

    In this paper, we describe our experience with the challenges thar we are currently facing in our effort to develop advanced software verification and validation tools. We categorize these challenges into several areas: cost benefits modeling, tool usability, customer application domain, and organizational issues. We provide examples of challenges in each area and identrfj, open research issues in areas which limit our ability to transfer high-assurance software engineering tools into practice.

  4. Supersaturation induced by Itraconazole/Soluplus® micelles provided high GI absorption in vivo

    Directory of Open Access Journals (Sweden)

    Yue Zhong

    2016-04-01

    Full Text Available To investigate the effect of supersaturation induced by micelle formation during dissolution on the bioavailability of itraconazole (ITZ/Soluplus® solid dispersion. Solid dispersions prepared by hot melt extrusion (HME were compressed into tablets directly with other excipients. Dissolution behavior of ITZ tablets was studied by dissolution testing and the morphology of micelles in dissolution media was studied using transmission electron microscopy (TEM. Drug transferring from stomach into intestine was simulated to obtain a supersaturated drug solution. Bioavailability studies were performed on the ITZ tablets and Sporanox® in beagle dogs. The morphology of micelles in the dissolution media was observed to be spherical in shape, with an average size smaller than 100 nm. The supersaturated solutions formed by Soluplus® micelles were stable and no precipitation took place over a period of 180 min. Compared with Sporanox®, ITZ tablets exhibited a 2.50-fold increase in the AUC(0–96 of ITZ and a 1.95-fold increase in its active metabolite hydroxyitraconazole (OH-ITZ in the plasma of beagle dogs. The results obtained provided clear evidence that not only the increase in the dissolution rate in the stomach, but also the supersaturation produced by micelles in the small intestine may be of great assistance in the successful development of poorly water-soluble drugs. The micelles formed by Soluplus® enwrapped the molecular ITZ inside the core which promoted the amount of free drug in the intestinal cavity and carried ITZ through the aqueous boundary layer (ABL, resulting in high absorption by passive transportation across biological membranes. The uptake of intact micelles through pinocytosis together with the inhibition of P-glycoprotein-mediated drug efflux in intestinal epithelia contributed to the absorption of ITZ in the gastrointestinal tract. These results indicate that HME with Soluplus®, which can induce supersaturation by micelle

  5. Technology of high-speed combined machining with brush electrode

    Science.gov (United States)

    Kirillov, O. N.; Smolentsev, V. P.; Yukhnevich, S. S.

    2018-03-01

    The new method was proposed for high-precision dimensional machining with a brush electrode when the true position of bundles of metal wire is adjusted by means of creating controlled centrifugal forces appeared due to the increased frequency of rotation of a tool. There are the ultimate values of circumferential velocity at which the bundles are pressed against a machined area of a workpiece in a stable manner despite the profile of the machined surface and variable stock of the workpiece. The special aspects of design of processing procedures for finishing standard parts, including components of products with low rigidity, are disclosed. The methodology of calculation and selection of processing modes which allow one to produce high-precision details and to provide corresponding surface roughness required to perform finishing operations (including the preparation of a surface for metal deposition) is presented. The production experience concerned with the use of high-speed combined machining with an unshaped tool electrode in knowledge-intensive branches of the machine-building industry for different types of production is analyzed. It is shown that the implementation of high-speed dimensional machining with an unshaped brush electrode allows one to expand the field of use of the considered process due to the application of a multipurpose tool in the form of a metal brush, as well as to obtain stable results of finishing and to provide the opportunities for long-term operation of the equipment without its changeover and readjustment.

  6. High-throughput technology for novel SO2 oxidation catalysts

    Science.gov (United States)

    Loskyll, Jonas; Stoewe, Klaus; Maier, Wilhelm F.

    2011-10-01

    We review the state of the art and explain the need for better SO2 oxidation catalysts for the production of sulfuric acid. A high-throughput technology has been developed for the study of potential catalysts in the oxidation of SO2 to SO3. High-throughput methods are reviewed and the problems encountered with their adaptation to the corrosive conditions of SO2 oxidation are described. We show that while emissivity-corrected infrared thermography (ecIRT) can be used for primary screening, it is prone to errors because of the large variations in the emissivity of the catalyst surface. UV-visible (UV-Vis) spectrometry was selected instead as a reliable analysis method of monitoring the SO2 conversion. Installing plain sugar absorbents at reactor outlets proved valuable for the detection and quantitative removal of SO3 from the product gas before the UV-Vis analysis. We also overview some elements used for prescreening and those remaining after the screening of the first catalyst generations.

  7. High-throughput technology for novel SO2 oxidation catalysts

    Directory of Open Access Journals (Sweden)

    Jonas Loskyll, Klaus Stoewe and Wilhelm F Maier

    2011-01-01

    Full Text Available We review the state of the art and explain the need for better SO2 oxidation catalysts for the production of sulfuric acid. A high-throughput technology has been developed for the study of potential catalysts in the oxidation of SO2 to SO3. High-throughput methods are reviewed and the problems encountered with their adaptation to the corrosive conditions of SO2 oxidation are described. We show that while emissivity-corrected infrared thermography (ecIRT can be used for primary screening, it is prone to errors because of the large variations in the emissivity of the catalyst surface. UV-visible (UV-Vis spectrometry was selected instead as a reliable analysis method of monitoring the SO2 conversion. Installing plain sugar absorbents at reactor outlets proved valuable for the detection and quantitative removal of SO3 from the product gas before the UV-Vis analysis. We also overview some elements used for prescreening and those remaining after the screening of the first catalyst generations.

  8. Development of very high temperature reactor design technology

    International Nuclear Information System (INIS)

    Lee, Won Jae; Noh, Jan Man

    2012-04-01

    or an efficient production of nuclear hydrogen, the VHTR (Very High Temperature Gas-cooled Reactor) of 950 .deg. C outlet temperature and the interfacing system for the hydrogen production are required. We have developed various evaluation technologies for the performance and safety of VHTR through the accomplishment of this project. First, to evaluate the performance of VHTR, a series of analyses has been performed such as core characteristics at 950 .deg. C, applicability of cooled-vessel, intermediate loop system and high temperature structural integrity. Through the analyses of major accidents such as HPCC and LPCC and the analysis of the risk/performance-informed method, VHTR safety evaluation has been also performed. In addition, various design analysis codes have been developed for a nuclear design, system loop design, system performance analysis, fission product/tritium transport analysis, core thermo-fluid analysis, system layout analysis, graphite structure seismic analysis and hydrogen exposion analysis, and they are being verified and validated through a lot of international collaborations

  9. 3-D MAPPING TECHNOLOGIES FOR HIGH LEVEL WASTE TANKS

    Energy Technology Data Exchange (ETDEWEB)

    Marzolf, A.; Folsom, M.

    2010-08-31

    This research investigated four techniques that could be applicable for mapping of solids remaining in radioactive waste tanks at the Savannah River Site: stereo vision, LIDAR, flash LIDAR, and Structure from Motion (SfM). Stereo vision is the least appropriate technique for the solids mapping application. Although the equipment cost is low and repackaging would be fairly simple, the algorithms to create a 3D image from stereo vision would require significant further development and may not even be applicable since stereo vision works by finding disparity in feature point locations from the images taken by the cameras. When minimal variation in visual texture exists for an area of interest, it becomes difficult for the software to detect correspondences for that object. SfM appears to be appropriate for solids mapping in waste tanks. However, equipment development would be required for positioning and movement of the camera in the tank space to enable capturing a sequence of images of the scene. Since SfM requires the identification of distinctive features and associates those features to their corresponding instantiations in the other image frames, mockup testing would be required to determine the applicability of SfM technology for mapping of waste in tanks. There may be too few features to track between image frame sequences to employ the SfM technology since uniform appearance may exist when viewing the remaining solids in the interior of the waste tanks. Although scanning LIDAR appears to be an adequate solution, the expense of the equipment ($80,000-$120,000) and the need for further development to allow tank deployment may prohibit utilizing this technology. The development would include repackaging of equipment to permit deployment through the 4-inch access ports and to keep the equipment relatively uncontaminated to allow use in additional tanks. 3D flash LIDAR has a number of advantages over stereo vision, scanning LIDAR, and SfM, including full frame

  10. New National Cryo-EM Facility Provides Access to Cutting-Edge Technology for Cancer Research Community | FNLCR

    Science.gov (United States)

    Cancer researchers nationwide now have access to the latest technology in the field of cryo-electron microscopy (cryo-EM)—the study of protein structures at atomic resolution—at the Frederick National Lab for Cancer Research. The emerging technol

  11. Use of Information and Communication Technologies in India's First Open University: Experience and Perceptions of Learners and Learner Support Providers

    Science.gov (United States)

    Satyanarayana, P.; Meduri, Emmanuel D. K.

    2015-01-01

    Dr. B. R. Ambedkar Open University (BRAOU), the first distance teaching university in India, was a great educational event. It started a new chapter in the history of India's distance higher education. The general objects this research studies are: (1) to identify the information and communication technologies used in open distance education…

  12. Technology trends in high temperature pressure transducers: The impact of micromachining

    Science.gov (United States)

    Mallon, Joseph R., Jr.

    1992-01-01

    This paper discusses the implications of micromachining technology on the development of high temperature pressure transducers. The introduction puts forth the thesis that micromachining will be the technology of choice for the next generation of extended temperature range pressure transducers. The term micromachining is defined, the technology is discussed and examples are presented. Several technologies for high temperature pressure transducers are discussed, including silicon on insulator, capacitive, optical, and vibrating element. Specific conclusions are presented along with recommendations for development of the technology.

  13. Engineering Technology Showcase to feature high-tech products from 18 companies

    OpenAIRE

    Gilbert, Karen

    2007-01-01

    The Student Technology Council (STC) at Virginia Tech is sponsoring an Engineering Technology Showcase on Tuesday, March 27. In addition to providing a platform for technology companies to show off their most recent innovations, technology presentations will be offered by Virginia Tech faculty and staff on topics ranging from a virtual greenhouse to the System X supercomputer.

  14. Training Physicians to Provide High-Value, Cost-Conscious Care A Systematic Review

    NARCIS (Netherlands)

    Stammen, L.A.; Stalmeijer, R.E.; Paternotte, E.; Pool, A.O.; Driessen, E.W.; Scheele, F.; Stassen, L.P.S.

    2015-01-01

    Importance Increasing health care expenditures are taxing the sustainability of the health care system. Physicians should be prepared to deliver high-value, cost-conscious care. Objective To understand the circumstances in which the delivery of high-value, cost-conscious care is learned, with a goal

  15. "Physics Stories": How the Early Technologies of High Voltage and High Vacuum Led to "Modern Physics"

    Science.gov (United States)

    Greenslade, Thomas B.

    2018-05-01

    Some of you may remember the 1979 television series "Connections" that was written and narrated by James Burke, a British science writer. Burke's technique was to choose a number of seemingly unrelated ideas and show how they led to developments in science and technology. This is an enjoyable business, even if some of the connections seem to be stretched at times, and led to a book by Burke. In a number of talks that I have given over the years, I have made somewhat less fanciful connections that suggest how the technologies of high vacuum and high voltage led to what used to be called "modern physics." Today we might limit the "modern" era to the years from 1890 to 1920 that gave the first workable theories of small-scale physics.

  16. The Impact of Technology on High School Mathematics Curriculum

    OpenAIRE

    Alacacı, Cengiz; McDonald, Gaby

    2014-01-01

    The infusion of technology into school mathematics has intensified in the last two decades. This article discusses the effects of this infusion on the mathematics curriculum. After a review of the different roles technology plays in mathematics and the diversity of the tools and their functions in teaching and learning mathematics, an epistemological perspective is offered to understand how technology could affect our cognition and perception while doing mathematics. With this background, spe...

  17. Applied Technology Proficiency of High School Students in Applied and Traditional Courses

    Science.gov (United States)

    Field, Dennis W.

    2003-01-01

    This investigation compares applied technology skill levels of high school students enrolled in various applied and comparable traditional courses, particularly Principles of Technology and physics courses respectively. Outcomes from ACT's Applied Technology Work Keys[R] assessment test were used as a measure of applied technology skill levels.…

  18. Engine technology challenges for a 21st century high speed civil transport

    Science.gov (United States)

    Shaw, Robert J.

    1991-01-01

    Recent NASA funded studies by Boeing and Douglas suggest an opportunity exists for a 21st Century High Speed Civil Transport (HSCT) to become part of the international air transportation system. However, before this opportunity for high speed travel can be realized, certain environmental and and economic barrier issues must be overcome. These challenges are outlined. Research activities which NASA has planned to address these barrier issues and to provide a technology base to allow U.S. manufacturers to make an informed go/no go decision on developing the HSCT are discussed.

  19. Large space system - Charged particle environment interaction technology. [effects on high voltage solar array performance

    Science.gov (United States)

    Stevens, N. J.; Roche, J. C.; Grier, N. T.

    1979-01-01

    Large high-voltage space power systems proposed for future applications in both low earth orbit and geosynchronous altitudes must operate in the space charged-particle environment with possible interactions between this environment and the high-voltage surfaces. The paper reviews the ground experimental work to provide indicators for the interactions that could exist in the space power system. A preliminary analytical model of a large space power system is constructed using the existing NASA Charging Analyzer Program, and its performance in geosynchronous orbit is evaluated. The analytical results are used to illustrate the regions where detrimental interactions could exist and to establish areas where future technology is required.

  20. Performance evaluation of thermophotovoltaic GaSb cell technology in high temperature waste heat

    Science.gov (United States)

    Utlu, Z.; Önal, B. S.

    2018-02-01

    In this study, waste heat was evaluated and examined by means of thermophotovoltaic systems with the application of energy production potential GaSb cells. The aim of our study is to examine GaSb cell technology at high temperature waste heat. The evaluation of the waste heat to be used in the system is designed to be used in the electricity, industry and iron and steel industry. Our work is research. Graphic analysis is done with Matlab program. The high temperature waste heat graphs applied on the GaSb cell are in the results section. Our study aims to provide a source for future studies.

  1. Informatics and Decisions support in Galway Bay (SmartBay) using ERDDAP, OGC Technologies and Third Party Data Sources to Provide Services to the Marine Community.

    Science.gov (United States)

    Delaney, Conor; Gaughan, Paul; Smyth, Damian

    2013-04-01

    The global marine sector generates and consumes vast quantities of operational and forecast data on a daily basis. One of the key challenges facing the sector relates to the management and transformation of that data into knowledge. The Irish Marine Institute (MI) generates oceanographic and environmental data on a regular and frequent basis. This data comes from operational ocean models run on the MI's high performance computer (HPC) and various environmental observation sensors systems. Some of the data published by the Marine Institute is brokered by the Environmental Research Division's Data Access Program (ERDDAP) data broker, which is a broker technology that uses technology based on OPeNDAP and Open Geospatial Consortium (OGC) standards. The broker provides a consistent web service interface to the data services of the Marine Institute; these services include wave, tide and weather sensors and numerical model output. An ERDDAP server publishes data in a number of standard and developer friendly ways, including some OGC formats. The data on the MI ERDDAP (http://erddap.marine.ie) server is published as OpenData. The marine work package of the FP7 funded ENVIROFI project (http://www.envirofi.eu/) has used the ERDDAP data broker as a core resource in the development of its Marine Asset management decision Support Tool (MAST) portal and phone App. Communication between MAST and ERDDAP is via a Uniform Resource Identifier (Linked Data). A key objective of the MAST prototype is to demonstrate the potential of next-generation dynamic web-based products and services and how they can be harnessed to facilitate growth of both the marine and IT sectors. The use case driving the project is the management of ocean energy assets in the marine environment. In particular the provision of information that aid in the decision making process surrounding maintenance at sea. This question is common to any offshore industry and solution proposed here is applicable to other users

  2. Dental care providers' and patients' perceptions of the effect of health information technology in the dental care setting.

    Science.gov (United States)

    Asan, Onur; Ye, Zhan; Acharya, Amit

    2013-09-01

    The use of electronic health records (EHRs) in dental care and their effect on dental care provider-patient interaction have not been studied sufficiently. The authors conducted a study to explore dental care providers' interactions with EHRs during patient visits, how these interactions influence dental care provider-patient communication, and the providers' and patients' perception of EHR use in the dental clinic setting during patient visits. The authors collected survey and interview data from patients and providers at three dental clinics in a health care system. The authors used qualitative and quantitative methods to analyze data obtained from patients and dental care providers. The provider survey results showed significant differences in perceptions of EHR use in patient visits across dental care provider groups (dentists, dental hygienists and dental assistants). Patient survey results indicated that some patients experienced a certain level of frustration and distraction because of providers' use of EHRs during the visit. The provider survey results indicated that there are different perceptions across provider groups about EHRs and the effect of computer use on communication with patients. Dental assistants generally reported more negative effects on communication with patients owing to computer use. Interview results also indicated that dental care providers may not feel comfortable interacting with the EHR without having any verbal or eye contact with patients during the patient's dental visit. A new design for dental operatories and locations of computer screens within the operatories should be undertaken to prevent negative nonverbal communication such as loss of eye contact or forcing the provider and patient to sit back to back, as well as to enhance patient education and information sharing.

  3. WVU--community partnership that provides science and math enrichment for underrepresented high school students.

    Science.gov (United States)

    Rye, J A; Chester, A L

    1999-04-01

    In response to the need to help West Virginia secondary school students overcome educational and economic barriers and to increase the number of health professionals in the state, the Health Sciences and Technology Academy (hereafter, "the Academy") was established in 1994. The Academy is a partnership between West Virginia University (WVU)--including the Robert C. Byrd Health Sciences Center, Eberly College of Arts and Sciences, and the College of Human Resources and Education--and members of the community, including secondary-school teachers, health care professionals, and other community leaders. The Academy targets students from underrepresented groups (mainly African Americans and financially disadvantaged whites) in grades nine through 12. By November 1997, 290 students (69% girls and 33% African American) from 17 counties were Academy participants. Funding is from the W. K. Kellogg Foundation, Howard Hughes Medical Institute, the National Institutes of Health, the Coca-Cola Foundation, and other sources. Academy programs are an on-campus summer institute and community-based clubs, where students engage in activities for science and math enrichment, leadership development, and health careers awareness. In the Academy's clubs, students carry out extended investigations of problems related to human health and local communities. Most students report that the Academy has increased their interest in health care careers, and almost all who have continued to participate in Academy programs through their senior year have been accepted into college.

  4. In situ neutron diffraction under high pressure—Providing an insight into working catalysts

    International Nuclear Information System (INIS)

    Kandemir, Timur; Wallacher, Dirk; Hansen, Thomas; Liss, Klaus-Dieter; Naumann d'Alnoncourt, Raoul; Schlögl, Robert; Behrens, Malte

    2012-01-01

    In the present work the construction and application of a continuous flow cell is presented, from which neutron diffraction data could be obtained during catalytic reactions at high pressure. By coupling an online gas detection system, parallel structure and activity investigations of working catalysts under industrial relevant conditions are possible. The flow cell can be operated with different feed gases in a wide range from room temperature to 603 K. Pressures from ambient up to 6 MPa are applicable. An exchangeable sample positioning system makes the flow cell suitable for several different goniomter types on a variety of instrument beam lines. Complementary operational test measurements were carried out monitoring reduction of and methanol synthesis over a Cu/ZnO/Al 2 O 3 catalyst at the high-flux powder diffraction beamline D1B at ILL and high-resolution diffraction beamline Echidna at ANSTO.

  5. In situ neutron diffraction under high pressure—Providing an insight into working catalysts

    Science.gov (United States)

    Kandemir, Timur; Wallacher, Dirk; Hansen, Thomas; Liss, Klaus-Dieter; Naumann d'Alnoncourt, Raoul; Schlögl, Robert; Behrens, Malte

    2012-05-01

    In the present work the construction and application of a continuous flow cell is presented, from which neutron diffraction data could be obtained during catalytic reactions at high pressure. By coupling an online gas detection system, parallel structure and activity investigations of working catalysts under industrial relevant conditions are possible. The flow cell can be operated with different feed gases in a wide range from room temperature to 603 K. Pressures from ambient up to 6 MPa are applicable. An exchangeable sample positioning system makes the flow cell suitable for several different goniomter types on a variety of instrument beam lines. Complementary operational test measurements were carried out monitoring reduction of and methanol synthesis over a Cu/ZnO/Al2O3 catalyst at the high-flux powder diffraction beamline D1B at ILL and high-resolution diffraction beamline Echidna at ANSTO.

  6. International Conference on Modern Mathematical Methods and High Performance Computing in Science and Technology

    CERN Document Server

    Srivastava, HM; Venturino, Ezio; Resch, Michael; Gupta, Vijay

    2016-01-01

    The book discusses important results in modern mathematical models and high performance computing, such as applied operations research, simulation of operations, statistical modeling and applications, invisibility regions and regular meta-materials, unmanned vehicles, modern radar techniques/SAR imaging, satellite remote sensing, coding, and robotic systems. Furthermore, it is valuable as a reference work and as a basis for further study and research. All contributing authors are respected academicians, scientists and researchers from around the globe. All the papers were presented at the international conference on Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST 2015), held at Raj Kumar Goel Institute of Technology, Ghaziabad, India, from 27–29 December 2015, and peer-reviewed by international experts. The conference provided an exceptional platform for leading researchers, academicians, developers, engineers and technocrats from a broad range of disciplines ...

  7. The Promise and Challenges of Ultra High Bypass Ratio Engine Technology and Integration

    Science.gov (United States)

    Hughes, Chris

    2011-01-01

    In this presentation, an overview of the research being conducted by the ERA Project in Ultra High Bypass aircraft propulsion and in partnership with Pratt & Whitney with their Geared TurboFan (GTF) is given. The ERA goals are shown followed by a discussion of what areas need to be addressed on the engine to achieve the goals and how the GTF is uniquely qualified to meet the goals through a discussion of what benefits the cycle provides. The first generation GTF architecture is then shown highlighting the areas of collaboration with NASA, and the fuel burn, noise and emissions reductions possible based on initial static ground test and flight test data of the first GTF engine. Finally, a 5 year technology roadmap is presented focusing on Ultra High Bypass propulsion technology research areas that are being pursued and being planned by ERA and P&W under their GTF program.

  8. Logical optical line terminal technologies towards flexible and highly reliable metro- and access-integrated networks

    Science.gov (United States)

    Okamoto, Satoru; Sato, Takehiro; Yamanaka, Naoaki

    2017-01-01

    In this paper, flexible and highly reliable metro and access integrated networks with network virtualization and software defined networking technologies will be presented. Logical optical line terminal (L-OLT) technologies and active optical distribution networks (ODNs) are the key to introduce flexibility and high reliability into the metro and access integrated networks. In the Elastic Lambda Aggregation Network (EλAN) project which was started in 2012, a concept of the programmable optical line terminal (P-OLT) has been proposed. A role of the P-OLT is providing multiple network services that have different protocols and quality of service requirements by single OLT box. Accommodated services will be Internet access, mobile front-haul/back-haul, data-center access, and leased line. L-OLTs are configured within the P-OLT box to support the functions required for each network service. Multiple P-OLTs and programmable optical network units (P-ONUs) are connected by the active ODN. Optical access paths which have flexible capacity are set on the ODN to provide network services from L-OLT to logical ONUs (L-ONUs). The L-OLT to L-ONU path on the active ODN provides a logical connection. Therefore, introducing virtualization technologies becomes possible. One example is moving an L-OLT from one P-OLT to another P-OLT like a virtual machine. This movement is called L-OLT migration. The L-OLT migration provides flexible and reliable network functions such as energy saving by aggregating L-OLTs to a limited number of P-OLTs, and network wide optical access path restoration. Other L-OLT virtualization technologies and experimental results will be also discussed in the paper.

  9. Genetic Data Provide Evidence for Wind-Mediated Transmission of Highly Pathogenic Avian Influenza

    NARCIS (Netherlands)

    Ypma, R.J.F.; Jonges, M.; Bataille, A.M.A.; Stegeman, J.A.; Koch, G.; van Boven, R.M.; Koopmans, M.; van Ballegooijen, W.M.; Wallinga, J.

    2013-01-01

    Outbreaks of highly pathogenic avian influenza in poultry can cause severe economic damage and represent a public health threat. Development of efficient containment measures requires an understanding of how these influenza viruses are transmitted between farms. However, the actual mechanisms of

  10. New Policies Allow High School Child Development Programs to Provide CDA Licensure

    Science.gov (United States)

    Langlais, Amanda G.

    2012-01-01

    Recent changes made by the Council for Professional Recognition to the Child Development Associate (CDA) credentialing program create an opportunity to redesign high school child development programs. On April 1, 2011, the Council for Professional Recognition lifted the age restriction in the CDA credentialing requirements, now allowing students…

  11. SEAFOODplus - how to provide health promoting, safe seafood of high eating quality to consumers

    DEFF Research Database (Denmark)

    Børresen, Torger

    2008-01-01

    The strategic objective of the SEAFOOD plus Integrated Project is to reduce health problems and to increase well-being among European consumers by applying the benefits obtained through consumption of health promoting and safe seafood products of high eating quality. The relevance of seafood in t...

  12. Rainforest Pharmacopeia in Madagascar Provides High Value for Current Local and Prospective Global Uses

    OpenAIRE

    Golden, Christopher D.; Rasolofoniaina, B. J. Rodolph; Anjaranirina, E. J. Gasta; Nicolas, Lilien; Ravaoliny, Laurent; Kremen, Claire

    2012-01-01

    Botanical diversity provides value to humans through carbon sequestration, air and water purification, and the provisioning of wild foods and ethnomedicines. Here we calculate the value of botanical ethnomedicines in a rainforest region of Madagascar, the Makira Protected Area, using a substitution method that combines replacement costs and choice modeling. The Makira watershed may comprise approximately 0.8% of global botanical diversity and possesses enormous value both in its ability to pr...

  13. High Temperature Electrolysis for Hydrogen Production from Nuclear Energy – TechnologySummary

    Energy Technology Data Exchange (ETDEWEB)

    J. E. O' Brien; C. M. Stoots; J. S. Herring; M. G. McKellar; E. A. Harvego; M. S. Sohal; K. G. Condie

    2010-02-01

    The Department of Energy, Office of Nuclear Energy, has requested that a Hydrogen Technology Down-Selection be performed to identify the hydrogen production technology that has the best potential for timely commercial demonstration and for ultimate deployment with the Next Generation Nuclear Plant (NGNP). An Independent Review Team has been assembled to execute the down-selection. This report has been prepared to provide the members of the Independent Review Team with detailed background information on the High Temperature Electrolysis (HTE) process, hardware, and state of the art. The Idaho National Laboratory has been serving as the lead lab for HTE research and development under the Nuclear Hydrogen Initiative. The INL HTE program has included small-scale experiments, detailed computational modeling, system modeling, and technology demonstration. Aspects of all of these activities are included in this report. In terms of technology demonstration, the INL successfully completed a 1000-hour test of the HTE Integrated Laboratory Scale (ILS) technology demonstration experiment during the fall of 2008. The HTE ILS achieved a hydrogen production rate in excess of 5.7 Nm3/hr, with a power consumption of 18 kW. This hydrogen production rate is far larger than has been demonstrated by any of the thermochemical or hybrid processes to date.

  14. Space station high gain antenna concept definition and technology development

    Science.gov (United States)

    Wade, W. D.

    1972-01-01

    The layout of a technology base is reported from which a mechanically gimballed, directional antenna can be developed to support a manned space station proposed for the late 1970's. The effort includes the concept definition for the antenna assembly, an evaluation of available technology, the design of critical subassemblies and the design of critical subassembly tests.

  15. Hybrid orientation technology and strain engineering for ultra-high ...

    Indian Academy of Sciences (India)

    con nitride (Si3N4) cap layer thickness for n-MOSFETs, Ge mole fraction optimization for p-MOSFETs on (110) substrates and channel length scaling have resulted in record RF performance, viz. the cut-off frequency, fT. Keywords. Hybrid orientation technology; technology CAD; process-induced strain; CMOS integrated ...

  16. Genome sequencing of the high oil crop sesame provides insight into oil biosynthesis

    Science.gov (United States)

    2014-01-01

    Background Sesame, Sesamum indicum L., is considered the queen of oilseeds for its high oil content and quality, and is grown widely in tropical and subtropical areas as an important source of oil and protein. However, the molecular biology of sesame is largely unexplored. Results Here, we report a high-quality genome sequence of sesame assembled de novo with a contig N50 of 52.2 kb and a scaffold N50 of 2.1 Mb, containing an estimated 27,148 genes. The results reveal novel, independent whole genome duplication and the absence of the Toll/interleukin-1 receptor domain in resistance genes. Candidate genes and oil biosynthetic pathways contributing to high oil content were discovered by comparative genomic and transcriptomic analyses. These revealed the expansion of type 1 lipid transfer genes by tandem duplication, the contraction of lipid degradation genes, and the differential expression of essential genes in the triacylglycerol biosynthesis pathway, particularly in the early stage of seed development. Resequencing data in 29 sesame accessions from 12 countries suggested that the high genetic diversity of lipid-related genes might be associated with the wide variation in oil content. Additionally, the results shed light on the pivotal stage of seed development, oil accumulation and potential key genes for sesamin production, an important pharmacological constituent of sesame. Conclusions As an important species from the order Lamiales and a high oil crop, the sesame genome will facilitate future research on the evolution of eudicots, as well as the study of lipid biosynthesis and potential genetic improvement of sesame. PMID:24576357

  17. GREEN TECHNOLOGY FORESIGHT OF HIGH TECHNOLOGY: HYPE OR POTENTIALS - THE CHALLENGES FROM NANOTECHNOLOGY, BIOTECHNOLOGY AND ICT

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    2004-01-01

    The paper describes the theoretical and methodological approach in an ongoing Danish technology foresight project focusing on the environmental potentials and risks of nanotechnology, biotechnology, and information and communication technology (ICT). The paper gives a short overview of some...... and analysis of emerging applications of the technologies, research processes and their dynamics, and future techno-economic networks which the future technologies might need or enable. The environmental assessment is based on the following principles: life cycle thinking, systems approach, open discussion...... environmental aspects of the three technological areas and discusses the challenges, when assessing the environmental aspects related to long term development of technologies, which often are described with very promising words. The approach to assessment of the environmental aspects is based on identification...

  18. Using Web-Based Technologies to Increase Evaluation Capacity in Organizations Providing Child and Youth Mental Health Services

    Science.gov (United States)

    Sundar, Purnima; Kasprzak, Susan; Halsall, Tanya; Woltman, Heather

    2010-01-01

    Given today's climate of economic uncertainty and fiscal restraint, organizations providing child and youth mental health services are required to do so with limited resources. Within this context, service providers face added pressure to deliver evidence-based programs and demonstrate program effectiveness. The Ontario Centre of Excellence for…

  19. In situ neutron diffraction under high pressure—Providing an insight into working catalysts

    OpenAIRE

    Kandemir, T.; Wallacher, D.; Hansen, T.; Liss, K.; Naumann d'Alnoncourt, R.; Schlögl, R.; Behrens, M.

    2012-01-01

    In the present work the construction and application of a continuous flow cell is presented, from which neutron diffraction data could be obtained during catalytic reactions at high pressure. By coupling an online gas detection system, parallel structure and activity investigations of working catalysts under industrial relevant conditions are possible. The flow cell can be operated with different feed gases in a wide range from room temperature to 603 K. Pressures from ambient up to 6 MPa are...

  20. Software project estimation the fundamentals for providing high quality information to decision makers

    CERN Document Server

    Abran, Alain

    2015-01-01

    Software projects are often late and over-budget and this leads to major problems for software customers. Clearly, there is a serious issue in estimating a realistic, software project budget. Furthermore, generic estimation models cannot be trusted to provide credible estimates for projects as complex as software projects. This book presents a number of examples using data collected over the years from various organizations building software. It also presents an overview of the non-for-profit organization, which collects data on software projects, the International Software Benchmarking Stan

  1. Public Funding for Contraception, Provider Training, and Use of Highly Effective Contraceptives: A Cluster Randomized Trial

    Science.gov (United States)

    Rocca, Corinne H.; Kohn, Julia E.; Goodman, Suzan; Stern, Lisa; Blum, Maya; Speidel, J. Joseph; Darney, Philip D.; Harper, Cynthia C.

    2016-01-01

    Objectives. We determined whether public funding for contraception was associated with long-acting reversible contraceptive (LARC) use when providers received training on these methods. Methods. We evaluated the impact of a clinic training intervention and public funding on LARC use in a cluster randomized trial at 40 randomly assigned clinics across the United States (2011–2013). Twenty intervention clinics received a 4-hour training. Women aged 18 to 25 were enrolled and followed for 1 year (n = 1500: 802 intervention, 698 control). We estimated the effects of the intervention and funding sources on LARC initiation with Cox proportional hazards models with shared frailty. Results. Women at intervention sites had higher LARC initiation than those at control (22 vs 18 per 100 person-years; adjusted hazard ratio [AHR] = 1.43; 95% confidence interval [CI] = 1.04, 1.98). Participants receiving care at clinics with Medicaid family planning expansion programs had almost twice the initiation rate as those at clinics without (25 vs 13 per 100 person-years; AHR = 2.26; 95% CI = 1.59, 3.19). LARC initiation also increased among participants with public (AHR = 1.56; 95% CI = 1.09, 2.22) but not private health insurance. Conclusions. Public funding and provider training substantially improve LARC access. PMID:26794168

  2. An LC-IMS-MS Platform Providing Increased Dynamic Range for High-Throughput Proteomic Studies

    Science.gov (United States)

    Baker, Erin Shammel; Livesay, Eric A.; Orton, Daniel J.; Moore, Ronald J.; Danielson, William F.; Prior, David C.; Ibrahim, Yehia M.; LaMarche, Brian L.; Mayampurath, Anoop M.; Schepmoes, Athena A.; Hopkins, Derek F.; Tang, Keqi; Smith, Richard D.; Belov, Mikhail E.

    2010-01-01

    A high-throughput approach and platform using 15 minute reversed-phase capillary liquid chromatography (RPLC) separations in conjunction with ion mobility spectrometry-mass spectrometry (IMS-MS) measurements was evaluated for the rapid analysis of complex proteomics samples. To test the separation quality of the short LC gradient, a sample was prepared by spiking twenty reference peptides at varying concentrations from 1 ng/mL to 10 µg/mL into a tryptic digest of mouse blood plasma and analyzed with both a LC-Linear Ion Trap Fourier Transform (FT) MS and LC-IMS-TOF MS. The LC-FT MS detected thirteen out of the twenty spiked peptides that had concentrations ≥100 ng/mL. In contrast, the drift time selected mass spectra from the LC-IMS-TOF MS analyses yielded identifications for nineteen of the twenty peptides with all spiking levels present. The greater dynamic range of the LC-IMS-TOF MS system could be attributed to two factors. First, the LC-IMS-TOF MS system enabled drift time separation of the low concentration spiked peptides from the high concentration mouse peptide matrix components, reducing signal interference and background, and allowing species to be resolved that would otherwise be obscured by other components. Second, the automatic gain control (AGC) in the linear ion trap of the hybrid FT MS instrument limits the number of ions that are accumulated to reduce space charge effects and achieve high measurement accuracy, but in turn limits the achievable dynamic range compared to the IMS-TOF instrument. PMID:20000344

  3. Surrogate measures for providing high frequency estimates of total phosphorus concentrations in urban watersheds.

    Science.gov (United States)

    Viviano, Gaetano; Salerno, Franco; Manfredi, Emanuela Chiara; Polesello, Stefano; Valsecchi, Sara; Tartari, Gianni

    2014-11-01

    Until robust in situ sensors for total phosphorus (TP) are developed, continuous water quality measurements have the potential to be used as surrogates for generating high frequency estimates. Their use has widespread implications for water quality monitoring programmes considering that TP, in particular, is generally recognised as the limiting factor in the process of eutrophication. Surrogate measures for TP concentration, such as turbidity, have proved useful within natural and agricultural contexts, but their predictive capability for urban watersheds is considered more difficult, due to the different sources of TP, though a strict relationship with turbidity/suspended matter has been clearly described even for these environments. In this context, we investigated this still unresolved problem for high frequency estimation of TP concentration in urban environments by monitoring a medium-sized (71 km(2)) urban watershed (Lambro River watershed, north Italy) in which we detected 60 active combined sewer overflows, and an its natural sub-basin for comparison. We found two different relationships between turbidity and TP concentration in the investigated urban watershed that differently describe the prevalence of TP from point sources (domestic wastewaters) or diffuse origin (surface runoff). In this regard, we first characterise the prevailing sources of TP by using a marker for detecting domestic wastewater contamination (caffeine), then we describe the mutual relationships amongst the continuously monitored variables (in our case the occurrence of the First Flush and the clockwise turbidity/discharge hysteresis). Afterwards we discriminate, by observing variables that are continuously monitored (in our case, the discharge and the turbidity), amongst the continuous surrogate records according to their sources. In conclusion, we are able to apply the relevant turbidity/TP regression equations to each turbidity record and, thus, estimate the respective TP

  4. CVTrees support the Bergey's systematics and provide high resolution at species levels and below

    Science.gov (United States)

    Hao, Bailin

    CV stands for Composition Vector. CVTree is an alignment-free method to infer phylogenetic trees from prokaryote whole genomes by using CVs after a subtraction procedure. CVTree is the name of a public domain Web Server that implements the method. The results obtained by this method or by the Web Server are also sometimes called CVTrees. The branchings in CVTrees are verified by direct comparison with the Bergey's Systematics and agree well with the latter at all taxonomic ranks from phylum down to species with a few exceptions which in most cases correspond to long-debated problems and may hint on possible taxonomic revisions. Moreover, CVTrees provide higher strain resolution at species level and below. In this mini-review we shall describe briefly the CVTree method and show some of its results.

  5. EMODNet Bathymetry - building and providing a high resolution digital bathymetry for European seas

    Science.gov (United States)

    Schaap, Dick M. A.

    2015-04-01

    Access to marine data is a key issue for the implementation of the EU Marine Strategy Framework Directive (MSFD). The EU communication 'Marine Knowledge 2020' underpins the importance of data availability and harmonising access to marine data from different sources. The European Marine Observation and Data Network (EMODnet) is a long term marine data initiative from the European Commission Directorate-General for Maritime Affairs and Fisheries (DG MARE) underpinning the Marine Knowledge 2020 strategy. EMODnet is a consortium of organisations assembling European marine data, data products and metadata from diverse sources in a uniform way. The main purpose of EMODnet is to unlock fragmented and hidden marine data resources and to make these available to individuals and organisations (public and private), and to facilitate investment in sustainable coastal and offshore activities through improved access to quality-assured, standardised and harmonised marine data which are interoperable and free of restrictions on use. The EMODnet data infrastructure is developed through a stepwise approach in three major phases. Currently EMODnet is in the 2nd phase of development with seven sub-portals in operation that provide access to marine data from the following themes: bathymetry, geology, physics, chemistry, biology, seabed habitats and human activities. EMODnet development is a dynamic process so new data, products and functionality are added regularly while portals are continuesly improved to make the service more fit for purpose and user friendly with the help of users and stakeholders. The EMODnet Bathymetry project develops and publishes Digital Terrain Models (DTM) for the European seas. These are produced from survey and aggregated data sets, that are indexed with metadata by adopting the SeaDataNet Common Data Index (CDI) data discovery and access service and the SeaDataNet Sextant data products catalogue service. The new EMODnet DTM will have a resolution of 1

  6. Attitudes of high school students regarding intimate relationships and gender norms in New Providence, The Bahamas

    Directory of Open Access Journals (Sweden)

    Nicolls, Donna

    2014-10-01

    Full Text Available This paper reports the attitudes and actions on relationships with the opposite sex of 1,002 Grade 10 and Grade 12 students in New Providence. Girls were more likely than boys to use aggressive behaviours in teen relationships. Some of the behaviours noted in teen relationships informed expectations of marital relationships, such as restricted access to friends of the opposite sex. The students endorsed a number of sex-related stereotypes, such as a man being the head of the household. Both male and female students indicated that it was acceptable for men to control their wives. Participation in aggressive and controlling behaviours by teens points to the need to educate students about how to develop more respectful relationships.

  7. Bio-Inspired Supramolecular Chemistry Provides Highly Concentrated Dispersions of Carbon Nanotubes in Polythiophene

    Directory of Open Access Journals (Sweden)

    Yen-Ting Lin

    2016-06-01

    Full Text Available In this paper we report the first observation, through X-ray diffraction, of noncovalent uracil–uracil (U–U dimeric π-stacking interactions in carbon nanotube (CNT–based supramolecular assemblies. The directionally oriented morphology determined using atomic force microscopy revealed highly organized behavior through π-stacking of U moieties in a U-functionalized CNT derivative (CNT–U. We developed a dispersion system to investigate the bio-inspired interactions between an adenine (A-terminated poly(3-adeninehexyl thiophene (PAT and CNT–U. These hybrid CNT–U/PAT materials interacted through π-stacking and multiple hydrogen bonding between the U moieties of CNT–U and the A moieties of PAT. Most importantly, the U···A multiple hydrogen bonding interactions between CNT–U and PAT enhanced the dispersion of CNT–U in a high-polarity solvent (DMSO. The morphology of these hybrids, determined using transmission electron microscopy, featured grape-like PAT bundles wrapped around the CNT–U surface; this tight connection was responsible for the enhanced dispersion of CNT–U in DMSO.

  8. Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

    Science.gov (United States)

    Rosmait, Russell L.

    1996-01-01

    The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

  9. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  10. High voltage power supply systems for electron beam and plasma technologies. Its new element base

    International Nuclear Information System (INIS)

    Dermengi, P.G.; Kureghan, A.S.; Pokrovsky, S.V.; Tchvanov, V.A.

    1994-01-01

    Transforming technique and high voltage technique supplementing each other more and more unite in indivisible constructions of modern apparatuses and systems and applicated in modern technologies providing its high efficiency. Specially worked out, ecologically clean, inertial, inflammable perfluororganic liquid is used in elements and electronic apparatuses simultaneously as insulating and cooling media. This liquid is highly fluid, fills tiny cavities in construction elements and in the places of high concentration of losses, where maximum local overheating of active parts or apparatus constructions takes place, it transforms to boiling state with highly intensive taking off of heat energy from cooled surface point. For instance, being cooled by mentioned perfluororganic liquid, copper wire can conduct current to 50 A/mm 2 density, but in ordinary conditions of transformers, reactors and busses, current density can reach only few Amperes. Possibility of considerable increasing of current density, that is reached by means of intensive cooling, provided by worked out liquid, and taking into account its incredibly high insulating features (liquid has electric strength to 50 KV/mm) allows to provide optimum heat regime of active parts of transformers. reactors, condenser, semiconductor devices, resistors, construction elements and electrotechnical apparatus in general. Particularly high effect of decreasing of weight and dimensions characteristics of elements and electrotechnical apparatus in general can be reached under working out of special constructions of each element and apparatus details, adapted to use of mentioned liquid as insulating and cooling media

  11. HIMSS Venture+ Forum and HX360 Provide Industry View of Health Technology Innovation, Startup and Investment Activity; Advancing the New Model of Care.

    Science.gov (United States)

    Burde, Howard A; Scarfo, Richard

    2015-01-01

    Presented by HIMSS, the Venture+ Forum program and pitch competition provides a 360-degree view on health technology investing and today's top innovative companies. It features exciting 3-minute pitch presentations from emerging and growth-stage companies, investor panels and a networking reception. Recent Venture+ Forum winners include TowerView Health, Prima-Temp, ActuaiMeds and M3 Clinician. As an industry catalyst for health IT innovation and business-building resource for growing companies and emerging technology solutions, HIMSS has co-developed with A VIA, a new initiative that addresses how emerging technologies, health system business model changes and investment will transform the delivery of care. HX360 engages senior healthcare leaders, innovation teams, investors and entrepreneurs around the vision of transforming healthcare delivery by leveraging technology, process and structure.

  12. A reliable and consistent production technology for high volume compacted graphite iron castings

    Directory of Open Access Journals (Sweden)

    Liu Jincheng

    2014-07-01

    Full Text Available The demands for improved engine performance, fuel economy, durability, and lower emissions provide a continual challenge for engine designers. The use of Compacted Graphite Iron (CGI has been established for successful high volume series production in the passenger vehicle, commercial vehicle and industrial power sectors over the last decade. The increased demand for CGI engine components provides new opportunities for the cast iron foundry industry to establish efficient and robust CGI volume production processes, in China and globally. The production window range for stable CGI is narrow and constantly moving. Therefore, any one step single addition of magnesium alloy and the inoculant cannot ensure a reliable and consistent production process for complicated CGI engine castings. The present paper introduces the SinterCast thermal analysis process control system that provides for the consistent production of CGI with low nodularity and reduced porosity, without risking the formation of flake graphite. The technology is currently being used in high volume Chinese foundry production. The Chinese foundry industry can develop complicated high demand CGI engine castings with the proper process control technology.

  13. An LC-IMS-MS Platform Providing Increased Dynamic Range for High-Throughput Proteomic Studies

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Erin Shammel; Livesay, Eric A.; Orton, Daniel J.; Moore, Ronald J.; Danielson, William F.; Prior, David C.; Ibrahim, Yehia M.; Lamarche, Brian L.; Mayampurath, Anoop M.; Schepmoes, Athena A.; Hopkins, Derek F.; Tang, Keqi; Smith, Richard D.; Belov, Mikhail E.

    2010-02-05

    A high-throughput approach and platform using 15 minute reversed-phase capillary liquid chromatography (RPLC) separations in conjunction with ion mobility spectrometry-mass spectrometry (IMS-MS) measurements was evaluated for the rapid analysis of complex proteomics samples. To test the separation quality of the short LC gradient, a sample was prepared by spiking twenty reference peptides at varying concentrations from 1 ng/mL to 10 µg/mL into a tryptic digest of mouse blood plasma and analyzed with both a LC-Linear Ion Trap Fourier Transform (FT) MS and LC-IMS-TOF MS. The LC-FT MS detected thirteen out of the twenty spiked peptides that had concentrations ≥100 ng/mL. In contrast, the drift time selected mass spectra from the LC-IMS-TOF MS analyses yielded identifications for nineteen of the twenty peptides with all spiking level present. The greater dynamic range of the LC-IMS-TOF MS system could be attributed to two factors. First, the LC-IMS-TOF MS system enabled drift time separation of the low concentration spiked peptides from the high concentration mouse peptide matrix components, reducing signal interference and background, and allowing species to be resolved that would otherwise be obscured by other components. Second, the automatic gain control (AGC) in the linear ion trap of the hybrid FT MS instrument limits the number of ions that are accumulated to reduce space charge effects, but in turn limits the achievable dynamic range compared to the TOF detector.

  14. Sand quarry wetlands provide high-quality habitat for native amphibians

    Directory of Open Access Journals (Sweden)

    M. Sievers

    2017-05-01

    Full Text Available Anthropogenic disturbances to habitats influence the fitness of individual animals, the abundance of their populations, and the composition of their communities. Wetlands in particular are frequently degraded and destroyed, impacting the animals that inhabit these important ecosystems. The creation of wetlands during and following sand extraction processes is inevitable, and thus, sand quarries have the potential to support aquatic animals. To determine how amphibians utilise these wetlands, I conducted nocturnal call surveys at wetlands within the Kables Sands quarry, New South Wales, Australia, and within surrounding reference wetlands, and quantified levels of developmental instability (DI as a proxy for fitness. Whilst quarry and reference wetlands were largely similar in terms of environmental characteristics, quarry wetlands consistently harboured more amphibian species and individuals. Using unsigned asymmetry as a measure of DI, frogs from the quarry sites exhibited significantly lower levels of DI compared to reference wetlands, indicating that quarry wetlands may be comparatively higher quality. Levels of DI within quarry wetlands also compared favourably to data from healthy frog populations extracted from the literature. Further enhancing the suitability of quarry wetlands would require minimal effort, with potentially significant increases in local and regional biodiversity. Documenting species presence and quantifying individual fitness by measuring limb lengths is an economically and logistically feasible method to assess the health of quarry wetlands. Overall, the methods outlined here provide a powerful, yet simple, tool to assess the overall health and suitability of quarry wetlands that could be easily adopted at quarries throughout the world.

  15. The Technological Input-output Efficiency of High-technology Enterprises in China Based on the DEA method

    Directory of Open Access Journals (Sweden)

    Lu Jing

    2017-01-01

    Full Text Available High-technology enterprises play the leader role in the regional economic progress, but nowadays technological resources have many problems such as division, separation and dispersing. It’s an urgent problem to be solved that how to evaluate input-output productivity of technological resources towards industries and regions scientifically and efficiently. Firstly the article analyzes the input-output efficiency status of technological resources at home and abroad. Then high-technology enterprises in 29 provinces, as the subject of evaluation, are analyzed for their operation efficiency by DEA. The article states the suggestions like balanced development among regions and reasonable structure of input and output by comparing the differences among regions. And the article estimates the technological resources configuration efficiency of 5 leader industries and explains the developmental characteristics and direction among industries. And on these bases the article conducts hypothesis testing for inner elements which might have an influence on the operational efficiency by Tobit model. Finally, the paper proposes many suggestions to the benefits of promoting the productivity of high-technology enterprise according to the comprehensive analysis.

  16. New techniques provide low-cost X-ray inspection of highly attenuating materials

    International Nuclear Information System (INIS)

    Stupin, D.M.; Mueller, K.H.; Viskoe, D.A.; Howard, B.; Poland, R.W.; Schneberk, D.; Dolan, K.; Thompson, K.; Stoker, G.

    1995-01-01

    As a result of an arms reduction treaty between the United States and the Russian Federation, both countries will each be storing over 40,000 containers of plutonium. To help detect any deterioration of the containers and prevent leakage, the authors are designing a digital radiography and computed tomography system capable of handling this volume reliably, efficiently, and at a lower cost. The materials to be stored have very high x-ray attenuations, and, in the past, were inspected using 1- to 24-MV x-ray sources. This inspection system, however, uses a new scintillating (Lockheed) glass and an integrating CCD camera. Preliminary experiments show that this will permit the use of a 450-kV x-ray source. This low-energy system will cost much less than others designed to use a higher-energy x-ray source because it will require a less expensive source, less shielding, and less floor space. Furthermore, they can achieve a tenfold improvement in spatial resolution by using their knowledge of the point-spread function of the x-ray imaging system and a least-squares fitting technique

  17. Monotreme Lactation Protein Is Highly Expressed in Monotreme Milk and Provides Antimicrobial Protection

    Science.gov (United States)

    Enjapoori, Ashwantha Kumar; Grant, Tom R.; Nicol, Stewart C.; Lefèvre, Christophe M.; Nicholas, Kevin R.; Sharp, Julie A.

    2014-01-01

    Monotremes (platypus and echidna) are the descendants of the oldest ancestor of all extant mammals distinguished from other mammals by mode of reproduction. Monotremes lay eggs following a short gestation period and after an even briefer incubation period, altricial hatchlings are nourished over a long lactation period with milk secreted by nipple-less mammary patches located on the female’s abdomen. Milk is the sole source of nutrition and immune protection for the developing young until weaning. Using transcriptome and mass spectrometry analysis of milk cells and milk proteins, respectively, a novel Monotreme Lactation Protein (MLP) was identified as a major secreted protein in milk. We show that platypus and short-beaked echidna MLP genes show significant homology and are unique to monotremes. The MLP transcript was shown to be expressed in a variety of tissues; however, highest expression was observed in milk cells and was expressed constitutively from early to late lactation. Analysis of recombinant MLP showed that it is an N-linked glycosylated protein and biophysical studies predicted that MLP is an amphipathic, α-helical protein, a typical feature of antimicrobial proteins. Functional analysis revealed MLP antibacterial activity against both opportunistic pathogenic Staphylococcus aureus and commensal Enterococcus faecalis bacteria but showed no effect on Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis, and Salmonella enterica. Our data suggest that MLP is an evolutionarily ancient component of milk-mediated innate immunity absent in other mammals. We propose that MLP evolved specifically in the monotreme lineage supporting the evolution of lactation in these species to provide bacterial protection, at a time when mammals lacked nipples. PMID:25245409

  18. Key technology studies of GY-20 and GY-40 High-capacity cobalt-60 transport casks

    International Nuclear Information System (INIS)

    Liu Huifang; Zhang Xin

    2012-01-01

    GY-20 and GY-40 high-capacity cobalt-60 transport casks are used to transport cobalt-60 industrial irradiators and cobalt-60 bundles. The radioactive contents have special features of high-activity and high residual heat, so only a few countries such as Canada, England and Russia have design capacity. The key technologies and corresponding solutions were studied for the design and manufacture of the cask taking into account the structural, thermal, mechanics and shield requests. A series of tests prove that the cask structure design, design criteria for lead coating structure and quality control measurements are reasonable and effective, and the cask shield integrity can be ensured for all conditions. The casks have ability to transport high-activity sealed sources safely, and the design of cask satisfies the requirement of design code and standard. It can provide reference for other B type package. (authors)

  19. Provider-based research networks and diffusion of surgical technologies among patients with early-stage kidney cancer.

    Science.gov (United States)

    Tan, Hung-Jui; Meyer, Anne-Marie; Kuo, Tzy-Mey; Smith, Angela B; Wheeler, Stephanie B; Carpenter, William R; Nielsen, Matthew E

    2015-03-15

    Provider-based research networks such as the National Cancer Institute's Community Clinical Oncology Program (CCOP) have been shown to facilitate the translation of evidence-based cancer care into clinical practice. This study compared the utilization of laparoscopy and partial nephrectomy among patients with early-stage kidney cancer according to their exposure to CCOP-affiliated providers. With linked Surveillance, Epidemiology, and End Results-Medicare data, patients with T1aN0M0 kidney cancer who had been treated with nephrectomy from 2000 to 2007 were identified. For each patient, the receipt of care from a CCOP physician or hospital and treatment with laparoscopy or partial nephrectomy were determined. Adjusted for patient characteristics (eg, age, sex, and marital status) and other organizational features (eg, community hospital and National Cancer Institute-designated cancer center), multivariate logistic regression was used to estimate the association between each surgical innovation and CCOP affiliation. During the study interval, 1578 patients (26.8%) were treated by a provider with a CCOP affiliation. Trends in the utilization of laparoscopy and partial nephrectomy remained similar between affiliated and nonaffiliated providers (P ≥ .05). With adjustments for patient characteristics, organizational features, and clustering, no association was noted between CCOP affiliation and the use of laparoscopy (odds ratio [OR], 1.11; 95% confidence interval [CI], 0.81-1.53) or partial nephrectomy (OR, 1.04; 95% CI, 0.82-1.32) despite the more frequent receipt of these treatments in academic settings (P kidney cancer, indicating perhaps a more limited scope to provider-based research networks as they pertain to translational efforts in cancer care. © 2014 American Cancer Society.

  20. The influence of vicarious experience provided through mobile technology on self-efficacy when learning new tasks

    NARCIS (Netherlands)

    Achterkamp, Reinoud; Hermens, Hermanus J.; Vollenbroek-Hutten, Miriam Marie Rosé

    2016-01-01

    Background: A high level of self-efficacy is a major contributor to the effectiveness of physical activity interventions. However, it is insufficiently known whether techniques that are used to influence self-efficacy in face-to-face or printed text interventions can also be successfully

  1. High Thrust-to-Power Annular Engine Technology

    Science.gov (United States)

    Patterson, Michael J.; Thomas, Robert E.; Crofton, Mark W.; Young, Jason A.; Foster, John E.

    2015-01-01

    Gridded ion engines have the highest efficiency and total impulse of any mature electric propulsion technology, and have been successfully implemented for primary propulsion in both geocentric and heliocentric environments with excellent ground/in-space correlation of performance. However, they have not been optimized to maximize thrust-to-power, an important parameter for Earth orbit transfer applications. This publication discusses technology development work intended to maximize this parameter. These activities include investigating the capabilities of a non-conventional design approach, the annular engine, which has the potential of exceeding the thrust-to-power of other EP technologies. This publication discusses the status of this work, including the fabrication and initial tests of a large-area annular engine. This work is being conducted in collaboration among NASA Glenn Research Center, The Aerospace Corporation, and the University of Michigan.

  2. Toward high-performance digital logic technology with carbon nanotubes.

    Science.gov (United States)

    Tulevski, George S; Franklin, Aaron D; Frank, David; Lobez, Jose M; Cao, Qing; Park, Hongsik; Afzali, Ali; Han, Shu-Jen; Hannon, James B; Haensch, Wilfried

    2014-09-23

    The slow-down in traditional silicon complementary metal-oxide-semiconductor (CMOS) scaling (Moore's law) has created an opportunity for a disruptive innovation to bring the semiconductor industry into a postsilicon era. Due to their ultrathin body and ballistic transport, carbon nanotubes (CNTs) have the intrinsic transport and scaling properties to usher in this new era. The remaining challenges are largely materials-related and include obtaining purity levels suitable for logic technology, placement of CNTs at very tight (∼5 nm) pitch to allow for density scaling and source/drain contact scaling. This review examines the potential performance advantages of a CNT-based computing technology, outlines the remaining challenges, and describes the recent progress on these fronts. Although overcoming these issues will be challenging and will require a large, sustained effort from both industry and academia, the recent progress in the field is a cause for optimism that these materials can have an impact on future technologies.

  3. Additive Manufacturing and High-Performance Computing: a Disruptive Latent Technology

    Science.gov (United States)

    Goodwin, Bruce

    2015-03-01

    This presentation will discuss the relationship between recent advances in Additive Manufacturing (AM) technology, High-Performance Computing (HPC) simulation and design capabilities, and related advances in Uncertainty Quantification (UQ), and then examines their impacts upon national and international security. The presentation surveys how AM accelerates the fabrication process, while HPC combined with UQ provides a fast track for the engineering design cycle. The combination of AM and HPC/UQ almost eliminates the engineering design and prototype iterative cycle, thereby dramatically reducing cost of production and time-to-market. These methods thereby present significant benefits for US national interests, both civilian and military, in an age of austerity. Finally, considering cyber security issues and the advent of the ``cloud,'' these disruptive, currently latent technologies may well enable proliferation and so challenge both nuclear and non-nuclear aspects of international security.

  4. Technology for the oil spills clean-up which provides preliminary accumulation of sorbents into the area of emergence and localization oil spills

    Directory of Open Access Journals (Sweden)

    M.L.Soroka

    2012-12-01

    Full Text Available Introduction: The implementation of measures for the prevention and spill of dangerous goods is an important aspect of sustainable development of railway transport. oil spills accident are the most dangerous. They are accompanied by significant pollution of all environmental objects. Studying and development of oil localization and clean-up technologies of such accidents is an important problem of environmental protection to modern conditions of railway transport development. The purpose: to improve the effectiveness of traditional methods of oil spill elimination and the development of new clean-up technologies adapted to the real conditions of the railway transport of Ukraine. Methods: To achieve the research purposes was used analysis of material flows, typical for places emergence and localization of the oil spill on the railways. Results: Analysis of standard technological scheme for the oil spills eliminations has shown that the most difficult task of effective clean-up surfaces is the timely delivery of oil sorbents and special equipment to the area spill containment. The general effectiveness of the elimination activities specifies the time from the beginning contact of dangerous goods with environmental objects to the absorption it into the structure of sorbent . Us was developed the technological scheme of oil spill elimination. This scheme provide a permanent and fast access to the sorbents into the oil spill localization area. It was proposed to device that allows you to transport the sorbent into sorption booms directly on the tank for transportation of petroleum products. Conclusions: Preventative accumulation of sorbents to the oil spill elimination into the localization area provides the organizational and operational simplicity of all stages of clean-up technology. Technical and economic assessment shows that the proposed technology is effective, technologically feasible and economically competitive.

  5. Development of high-level radioactive waste treatment and conversion technologies 'Dry decontamination technology development for highly radioactive contaminants'

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Lee, K. W.; Won, H. J.; Jung, C. J.; Choi, W. K.; Kim, G. N.; Moon, J. K

    2001-04-01

    The followings were studied through the project entitled 'Dry Decontamination Technology Development for Highly Radioactive Contaminants'. 1.Contaminant Characteristics Analysis of Domestic Nuclear Fuel Cycle Projects(NFCP) and Applicability Study of the Unit Dry-Decontamination Techniques A. Classification of contaminated equipments and characteristics analysis of contaminants B. Applicability study of the unit dry-decontamination techniques 2.Performance Evaluation of Unit Dry Decontamination Technique A. PFC decontamination technique B. CO2 decontamination technique C. Plasma decontamination technique 3.Development of Residual Radiation Assessment Methodology for High Radioactive Facility Decontamination A. Development of radioactive nuclide diffusion model on highly radioactive facility structure B. Obtainment of the procedure for assessment of residual radiation dose 4.Establishment of the Design Concept of Dry Decontamination Process Equipment Applicable to Highly Radioactive Contaminants 5.TRIGA soil unit decontamination technology development A. Development of soil washing and flushing technologies B. Development of electrokinetic soil decontamination technology.

  6. Study on the high-precision laser welding technology of nuclear fuel elements processing

    International Nuclear Information System (INIS)

    Kim, Soo Sung; Yang, M. S.; Kim, W. K.; Lee, D. Y.

    2001-01-01

    The proper welding method for appendage of bearing pads and spacers of PHWR nuclear fuel elements is considered important in respect to the soundness of weldments and the improvement of the performance of nuclear fuels during the operation in reactor. The probability of welding defects of the appendage parts is mostly apt to occur and it is connected directly with the safty and life prediction of the nuclear reactor in operation. Recently there has been studied all over the world to develope welding technology by laser in nuclear fuel processing, and the appendage of bearing pads and spacers of PHWR nuclear fuel elements. Therefore, the purpose of this study is to investigate the characteristics of the laser welded specimens and make some samples for the appendage of bearing pads of PHWR nuclear fuel elements. This study will be also provide the basic data for the fabrications of the appendage of bearing pads and spacers. Especially the laser welding is supposed to be used in the practical application such as precise materials manufacturing fields. In this respect this technology is not only a basic advanced technology with wide applications but also likely to be used for the development of directly applicable technologies for industries, with high potential benefits derived in the view point of economy and industry

  7. Study on the high-precision laser welding technology of nuclear fuel elements processing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Soo Sung; Yang, M. S.; Kim, W. K.; Lee, D. Y

    2001-01-01

    The proper welding method for appendage of bearing pads and spacers of PHWR nuclear fuel elements is considered important in respect to the soundness of weldments and the improvement of the performance of nuclear fuels during the operation in reactor. The probability of welding defects of the appendage parts is mostly apt to occur and it is connected directly with the safty and life prediction of the nuclear reactor in operation. Recently there has been studied all over the world to develope welding technology by laser in nuclear fuel processing, and the appendage of bearing pads and spacers of PHWR nuclear fuel elements. Therefore, the purpose of this study is to investigate the characteristics of the laser welded specimens and make some samples for the appendage of bearing pads of PHWR nuclear fuel elements. This study will be also provide the basic data for the fabrications of the appendage of bearing pads and spacers. Especially the laser welding is supposed to be used in the practical application such as precise materials manufacturing fields. In this respect this technology is not only a basic advanced technology with wide applications but also likely to be used for the development of directly applicable technologies for industries, with high potential benefits derived in the view point of economy and industry.

  8. New Technologies Provide Quantum Changes in the Scale, Speed, and Success of SELEX Methods and Aptamer Characterization

    Directory of Open Access Journals (Sweden)

    Abdullah Ozer

    2014-01-01

    Full Text Available Single-stranded oligonucleotide aptamers have attracted great attention in the past decade because of their diagnostic and therapeutic potential. These versatile, high affinity and specificity reagents are selected by an iterative in vitro process called SELEX, Systematic Evolution of Ligands by Exponential Enrichment. Numerous SELEX methods have been developed for aptamer selections; some that are simple and straightforward, and some that are specialized and complicated. The method of SELEX is crucial for selection of an aptamer with desired properties; however, success also depends on the starting aptamer library, the target molecule, aptamer enrichment monitoring assays, and finally, the analysis and characterization of selected aptamers. Here, we summarize key recent developments in aptamer selection methods, as well as other aspects of aptamer selection that have significant impact on the outcome. We discuss potential pitfalls and limitations in the selection process with an eye to aid researchers in the choice of a proper SELEX strategy, and we highlight areas where further developments and improvements are desired. We believe carefully designed multiplexed selection methods, when complemented with high-throughput downstream analysis and characterization assays, will yield numerous high-affinity aptamers to protein and small molecule targets, and thereby generate a vast array of reagents for probing basic biological mechanisms and implementing new diagnostic and therapeutic applications in the near future.

  9. Technology assessment and resource allocation for predictive genetic testing: A study of the perspectives of Canadian genetic health care providers

    Directory of Open Access Journals (Sweden)

    Einsiedel Edna

    2009-06-01

    Full Text Available Abstract Background With a growing number of genetic tests becoming available to the health and consumer markets, genetic health care providers in Canada are faced with the challenge of developing robust decision rules or guidelines to allocate a finite number of public resources. The objective of this study was to gain Canadian genetic health providers' perspectives on factors and criteria that influence and shape resource allocation decisions for publically funded predictive genetic testing in Canada. Methods The authors conducted semi-structured interviews with 16 senior lab directors and clinicians at publically funded Canadian predictive genetic testing facilities. Participants were drawn from British Columbia, Alberta, Manitoba, Ontario, Quebec and Nova Scotia. Given the community sampled was identified as being relatively small and challenging to access, purposive sampling coupled with snowball sampling methodologies were utilized. Results Surveyed lab directors and clinicians indicated that predictive genetic tests were funded provincially by one of two predominant funding models, but they themselves played a significant role in how these funds were allocated for specific tests and services. They also rated and identified several factors that influenced allocation decisions and patients' decisions regarding testing. Lastly, participants provided recommendations regarding changes to existing allocation models and showed support for a national evaluation process for predictive testing. Conclusion Our findings suggest that largely local and relatively ad hoc decision making processes are being made in relation to resource allocations for predictive genetic tests and that a more coordinated and, potentially, national approach to allocation decisions in this context may be appropriate.

  10. Developments and Prospects of Long-Span High-Speed Railway Bridge Technologies in China

    Directory of Open Access Journals (Sweden)

    Shunquan Qin

    2017-12-01

    Full Text Available With the rapid developments of the high-speed railway in China, a great number of long-span bridges have been constructed in order to cross rivers and gorges. At present, the longest main span of a constructed high-speed railway bridge is only 630 m. The main span of Hutong Yangtze River Bridge and of Wufengshan Yangtze River Bridge, which are under construction, will be much longer, at 1092 m each. In order to overcome the technical issues that originate from the extremely large dead loading and the relatively small structural stiffness of long-span high-speed railway bridges, many new technologies in bridge construction, design, materials, and so forth have been developed. This paper carefully reviews progress in the construction technologies of multi-function combined bridges in China, including combined highway and railway bridges and multi-track railway bridges. Innovations and practices regarding new types of bridge and composite bridge structures, such as bridges with three cable planes and three main trusses, inclined main trusses, slab-truss composite sections, and steel-concrete composite sections, are introduced. In addition, investigations into high-performance materials and integral fabrication and erection techniques for long-span railway bridges are summarized. At the end of the paper, prospects for the future development of long-span high-speed railway bridges are provided.

  11. Normal incidence spectrophotometer using high density transmission grating technology and highly efficiency silicon photodiodes for absolute solar EUV irradiance measurements

    Science.gov (United States)

    Ogawa, H. S.; Mcmullin, D.; Judge, D. L.; Korde, R.

    1992-01-01

    New developments in transmission grating and photodiode technology now make it possible to realize spectrometers in the extreme ultraviolet (EUV) spectral region (wavelengths less than 1000 A) which are expected to be virtually constant in their diffraction and detector properties. Time dependent effects associated with reflection gratings are eliminated through the use of free standing transmission gratings. These gratings together with recently developed and highly stable EUV photodiodes have been utilized to construct a highly stable normal incidence spectrophotometer to monitor the variability and absolute intensity of the solar 304 A line. Owing to its low weight and compactness, such a spectrometer will be a valuable tool for providing absolute solar irradiance throughout the EUV. This novel instrument will also be useful for cross-calibrating other EUV flight instruments and will be flown on a series of Hitchhiker Shuttle Flights and on SOHO. A preliminary version of this instrument has been fabricated and characterized, and the results are described.

  12. Business cycle and innovation activity in medium-high and high technology industry in Poland

    Directory of Open Access Journals (Sweden)

    Dzikowski Piotr

    2015-12-01

    Full Text Available This article examines differences in an impact of business cycle phases on innovation activity in medium-high and high technology industry in Poland. It is assumed that each business cycle phase influences innovation activity in the same fashion, but its impact varies and it depends on the firm’s innovation activity. The higher innovation activity the less impact of business cycle. The scope of the survey relates to innovation in MHT and HT industry in Poland. The data concerns the innovation at the firm level and the diffusion “new for the company”. Innovation activity is defined by the following activities: (1 expenditure on research and development and investments in fixed assets not used so far such as: abuildings, premises and land; b machinery and equipment, c computer software; (2 implementation of new products and technological processes and (3 innovation cooperation. The methodological part of the analysis includes a logit modeling. The survey includes 1355 companies. Business cycle has a great influence on innovation activity in MTH and HT industry in Poland. The influence of recovery phase is positive whereas both stagnation and recession phases decrease the probability of innovation activity. The character of influence depends on the propensity to take innovation activity. The higher level of innovation activity the enterprises present the less influence of business cycle they get.

  13. Internationalization Patterns of Small High Technology Firms: Keep On, Step Back, or Withdraw

    DEFF Research Database (Denmark)

    Turcan, Romeo V.; Jones, Marian

    This study aims to further the understanding of the cross-border activities of Small High Technology Firms (SHTFs) through a qualitative, longitudinal insight into the post-internationalization behaviour of four Scottish SHTFs. The focus is on decisions that led to the reduction of international...... of internationalisation arguing that it may provide a better understanding of a more holistic internationalization process of the firm. In light of the above, policy makers are advised to support firms’ inward international operations and provide tailored cross-border support to small firms by changing their trade...... support mission from supporting exports to providing more general support for internationalization as a process of firm growth and development....

  14. High-rise housing construction as a way of solving the problem of providing people with comfortable habitation

    Science.gov (United States)

    Misailovov, Andrey

    2018-03-01

    The article analyzes the role of high-rise construction in solving the problem of providing people with comfortable habitation. High-rise construction is considered as a part of urban environment of big cities, a way of effective land use and development of entrepreneurship, including small and medium-sized enterprises. The economic efficiency of high-rise construction, an increase in budgetary financing and the number of introduced innovations are discussed.

  15. High Technology Products Exports by India and China: A Constant Market Share Analysis

    OpenAIRE

    Chatterjee, Rittwik; Chattopadhyay, Srobonti

    2013-01-01

    With more and more globalization, international trade has expanded to a large extent. This is also observable for trades in high technology products. India and China have emerged as two major exporters of high technology products in the world today. This paper makes an attempt to understand the various dimensions of high technology products exports from these two countries through constant market share (CMS) analysis and also the policy implications by looking at the various components of exp...

  16. Assessing New Zealand High School Science Teachers' Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Owusu, Kofi Acheaw; Conner, Lindsey; Astall, Chris

    2015-01-01

    Technological pedagogical content knowledge (TPACK) is the knowledge required for effective technology integration in teaching. In this study, New Zealand high school science teachers' TPACK was assessed through an online survey. The data and its analysis revealed that New Zealand's high school science teachers in general had a high perception of…

  17. Italian high technology shows its wares at CERN

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    Italian industry held an exhibition at CERN on 14-17 November with 26 firms displaying innovative technological developments.The exhibition was inaugurated in the presence of Guido Possa, vice-minister for education, universities and research. The event was organized by Sandro Centro, INFN researcher and Industrial Liaison Officer at CERN.

  18. High flux palladium silver alloy membranes fabricated by microsystem technology

    NARCIS (Netherlands)

    Gielens, F.C.; Tong, D.H.; van Rijn, C.J.M.; Vorstman, M.A.G.; Keurentjes, J.T.F.

    2002-01-01

    In this study, hydrogen selective membranes have been fabricated using microsystem technology. A 750 nm dense layer of Pd (77 wt%) and Ag (23 wt%) is deposited on a non-porous 1 mm thick silicon nitride layer by cosputtering of a Pd and a Ag target. After sputtering, openings of 5 μm are made in the

  19. High Speed Milling : By using STL-Technology

    NARCIS (Netherlands)

    Gunnink, J.W.

    1998-01-01

    Despite the wide application of Layered Manufacturing Technologies like Fused Deposition Modelling, Layered Object Manufacturing etc. in the product development processes, milling is stili necessary. This is a result of the fact that Layered Manufacturing processes have some limitations in for

  20. Technology use among Ghanaian Senior High School mathematics ...

    African Journals Online (AJOL)

    kofi.mereku

    This programme was designed to use technology to open a world of learning for teachers and students. ... into their curricula, to facilitate collaborative projects and distance learning among teachers and students, to assist ..... recurring decimals as common fractions (65.0%) and to calculate the mean, median and standard ...

  1. Review on an Advanced High-Temperature Measurement Technology: The Optical Fiber Thermometry

    Directory of Open Access Journals (Sweden)

    Y. B. Yu

    2009-01-01

    Full Text Available Optical fiber thermometry technology for high-temperature measurement is briefly reviewed in this paper. The principles, characteristics, recent progresses and advantages of the technology are described. Examples of using the technology are introduced. Many blackbody, infrared, and fluorescence optical thermometers are developed for practical applications.

  2. Measuring the Influences That Affect Technological Literacy in Rhode Island High Schools

    Science.gov (United States)

    Walach, Michael

    2015-01-01

    This study sampled the current state of technological literacy in Rhode Island high schools using a new instrument, the Technological Literacy Assessment, which was developed for this study. Gender inequalities in technological literacy were discovered, and possible causes and solutions are presented. This study suggests possible next steps for…

  3. Developing the Principal Technology Leadership Competency Indicators for Technical High Schools in K-12 in Taiwan

    Science.gov (United States)

    Shyr, Wen-Jye

    2017-01-01

    The purpose of this study was to develop principal technology leadership competency indicators for technical high schools in K-12 in Taiwan in order to improve the effectiveness of school administration and teaching. In the first part of the study, five experts in the technology leadership field are interviewed to explore the technology leadership…

  4. The business end of health information technology. Can a fully integrated electronic health record increase provider productivity in a large community practice?

    Science.gov (United States)

    De Leon, Samantha; Connelly-Flores, Alison; Mostashari, Farzad; Shih, Sarah C

    2010-01-01

    Electronic health records (EHRs) are expected to transform and improve the way medicine is practiced. However, providers perceive many barriers toward implementing new health information technology. Specifically, they are most concerned about the potentially negative impact on their practice finances and productivity. This study compares the productivity of 75 providers at a large urban primary care practice from January 2005 to February 2009, before and after implementing an EHR system, using longitudinal mixed model analyses. While decreases in productivity were observed at the time the EHR system was implemented, most providers quickly recovered, showing increases in productivity per month shortly after EHR implementation. Overall, providers had significant productivity increases of 1.7% per month per provider from pre- to post-EHR adoption. The majority of the productivity gains occurred after the practice instituted a pay-for-performance program, enabled by the data capture of the EHRs. Coupled with pay-for-performance, EHRs can spur rapid gains in provider productivity.

  5. Controlling the periodontal-restorative interface to provide esthetic dentistry for an esthetically high-risk patient.

    Science.gov (United States)

    Tunkiwala, Aliasger

    2013-02-01

    This case involved a young female patient with anterior wear and a high lip line and thin tissue biotype. An organized approach was carried out to diagnose the esthetic problems so that a multidisciplinary treatment plan could be devised. The comprehensive plan included occlusal analysis and equilibration to establish maximum intercuspation in harmony with centric relation, correction of gingival levels, feldspathic porcelain restorations, and teeth bleaching. The case demonstrates technological advances and improvement in dentistry's understanding of the science of color and dental ceramics.

  6. The high efficiency of innovative educational technologies

    Directory of Open Access Journals (Sweden)

    Dadyan Eh. G.

    2016-03-01

    Full Text Available student learning takes place as scheduled in the computer lab and at home on their own computers in thin client mode and cloud technologies. In line with the studied material discipline, students can take advantage of the cloud services. Attracting innovative methods has allowed roughly halved to intensify the process of learning material, boost academic performance (approximately 40–50% and dramatically improve motivation to study discipline.

  7. Development of Advanced High Lift Leading Edge Technology for Laminar Flow Wings

    Science.gov (United States)

    Bright, Michelle M.; Korntheuer, Andrea; Komadina, Steve; Lin, John C.

    2013-01-01

    This paper describes the Advanced High Lift Leading Edge (AHLLE) task performed by Northrop Grumman Systems Corporation, Aerospace Systems (NGAS) for the NASA Subsonic Fixed Wing project in an effort to develop enabling high-lift technology for laminar flow wings. Based on a known laminar cruise airfoil that incorporated an NGAS-developed integrated slot design, this effort involved using Computational Fluid Dynamics (CFD) analysis and quality function deployment (QFD) analysis on several leading edge concepts, and subsequently down-selected to two blown leading-edge concepts for testing. A 7-foot-span AHLLE airfoil model was designed and fabricated at NGAS and then tested at the NGAS 7 x 10 Low Speed Wind Tunnel in Hawthorne, CA. The model configurations tested included: baseline, deflected trailing edge, blown deflected trailing edge, blown leading edge, morphed leading edge, and blown/morphed leading edge. A successful demonstration of high lift leading edge technology was achieved, and the target goals for improved lift were exceeded by 30% with a maximum section lift coefficient (Cl) of 5.2. Maximum incremental section lift coefficients ( Cl) of 3.5 and 3.1 were achieved for a blown drooped (morphed) leading edge concept and a non-drooped leading edge blowing concept, respectively. The most effective AHLLE design yielded an estimated 94% lift improvement over the conventional high lift Krueger flap configurations while providing laminar flow capability on the cruise configuration.

  8. Using multimedia information and communication technology (ICT) to provide added value to reminiscence therapy for people with dementia : Lessons learned from three field studies.

    Science.gov (United States)

    Bejan, Alexander; Gündogdu, Ramazan; Butz, Katherina; Müller, Nadine; Kunze, Christophe; König, Peter

    2018-01-01

    In the care of people with dementia (PwD), occupational therapies and activities aiming at maintaining the quality of life of PwD, such as reminiscence therapy (RT), are taking on a more and more important role. Information and communication technology (ICT) has the potential to improve and to facilitate RT by facilitating access to and selection of biographical information and related contents or by providing novel multimodal interaction forms to trigger memories; however, interactive multimedia technology is barely used in practice. This article presents three exploratory field studies that evaluated different aspects of RT technology use for PwD in care homes, including the utilization of online movie databases, interactive surface touch computers as well as natural user interfaces allowing gestures and haptic interaction. In these studies, the usage of prototype systems was observed in occupational sessions by 5, 12 and 16 PwD. The results indicate positive effects of technology use, e. g. in the form of verbally elicited reminiscence statements, expressed joy and playful interaction. Lessons learned for the design of technology-based RT interventions are presented and discussed.

  9. Shifting technology from the universities to a high performance business

    Directory of Open Access Journals (Sweden)

    Lazarus Neely

    2009-12-01

    Full Text Available The first aim of this study is to identify the external and internal factors that have shaped the performance of Technology-Based Start-up Firms (TBSF in the US. The second goal is to compare this study with a previous study conducted in Brazil, to identify incubator best practices that may increase the performance of incubated firms. The US study focuses on graduated firms from the Indiana University incubator located in Indianapolis. The main partners of three technology-based start-up firms were interviewed, based on a semi-structured questionnaire. The outcomes from our analysis indicated that the TBSF have both internal and external factors that affect their performance. The analysis showed that as an external factor, the incubator’s connection with university was helpful for obtaining capital. As internal factors, the technical expertise and entrepreneur managerial competence was identified as fundamental factors for TBSF success. The analysis also indicated that some of those factors are different between Brazilian firms and American firms. In Brazil, the management training offered by the incubator is considered very important for the performance of the incubated firms. This was not confirmed in the American study. Knowing what affects the performance of technology-based start-up firms will help incubators offer improved, and more comprehensive services enabling firms to develop and expand.

  10. STEM Career Cluster Engineering and Technology Education pathway in Georgia: Perceptions of Georgia engineering and technology education high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education survey

    Science.gov (United States)

    Crenshaw, Mark VanBuren

    This study examined the perceptions held by Georgia Science, Technology, Engineering, and Mathematics (STEM) Career Cluster Engineering and Technology Education (ETE) high school pathway teachers and Georgia's Career, Technical and Agriculture Education (CTAE) administrators regarding the ETE pathway and its effect on implementation within their district and schools. It provides strategies for ETE teaching methods, curriculum content, STEM integration, and how to improve the ETE pathway program of study. Current teaching and curricular trends were examined in ETE as well as the role ETE should play as related to STEM education. The study, using the Characteristics of Engineering and Technology Education Survey, was conducted to answer the following research questions: (a) Is there a significant difference in the perception of ETE teaching methodology between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (b) Is there a significant difference in the perception of ETE curriculum content between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (c) Is there a significant difference in the perception of STEM integration in the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? and (d) Is there a significant difference in the perception of how to improve the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? Suggestions for further research also were offered.

  11. Next Generation Modeling Technology for High Speed Rotorcraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Development of a new generation of high speed rotorcraft has been hampered by both an absence of strong predictive methods for rotors operating at very high advance...

  12. Packaging Technology for SiC High Temperature Electronics

    Science.gov (United States)

    Chen, Liang-Yu; Neudeck, Philip G.; Spry, David J.; Meredith, Roger D.; Nakley, Leah M.; Beheim, Glenn M.; Hunter, Gary W.

    2017-01-01

    High-temperature environment operable sensors and electronics are required for long-term exploration of Venus and distributed control of next generation aeronautical engines. Various silicon carbide (SiC) high temperature sensors, actuators, and electronics have been demonstrated at and above 500 C. A compatible packaging system is essential for long-term testing and application of high temperature electronics and sensors in relevant environments. This talk will discuss a ceramic packaging system developed for high temperature electronics, and related testing results of SiC integrated circuits at 500 C facilitated by this high temperature packaging system, including the most recent progress.

  13. LIQUIDARMOR CM Flashing and Sealant, High Impact Technology Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Hun, Diana E [ORNL; Bhandari, Mahabir S [ORNL

    2016-12-01

    Air leakage is responsible for about 1.1 quads of energy or 6% of the total energy used by commercial buildings in the US. Consequently, infiltration and exfiltration are among the largest envelope-related contributors to the heating, ventilation, and air conditioning loads in commercial buildings. New air sealing technologies have recently emerged that aim to improve the performance of air barrier systems by simplifying their installation procedure. LIQUIDARMORTM CM Flashing and Sealant is an example of these new advanced material technologies. This technology is a spray-applied sealant and liquid flashing and can span gaps that are up to ¼ in. wide without a supporting material. ORNL verified the performance of LIQUIDARMORTM CM with field tests and energy simulations from a building in which LIQUIDARMORTM CM was one of components of the air barrier system. The Homeland Security Training Center (HTC) at the College of DuPage in Glen Ellyn, IL, served as the demonstration site. Blower door test results show the average air leakage rate in the demonstration site to be 0.15 cfm/ft2 at 1.57 psf, or 63% lower than the 0.4 cfm at 1.57 psf specified in the 2015 International Energy Conservation Code (IECC). According to simulation results, HTC lowered its annual heating and cooling cost by about $3,000 or 9% compared to a similar building that lacked an air barrier system. This demonstration project serves as an example of the level of building envelope airtightness that can be achieved by using air barrier materials that are properly installed, and illustrates the energy and financial savings that such an airtight envelope could attain.

  14. DEVELOPING THE HIGH-TECHNOLOGY INDUSTRY IN MEXICO THROUGH SUPPLY CHAIN COLLABORATION AND GOVERNMENT INTERVENTION

    OpenAIRE

    Navarro Gerrard, David

    2015-01-01

    The high-technology industry is composed of various sectors which are characterized by more strict and demanding clients within international growing markets. Developing countries face harsher domestic conditions than others, however, there are some countries such as Mexico, China and India whose industries have been recognized as reliable supply chains, especially for the high-technology one. Supply Chain Collaboration or Strategic Technology Partnering’s is a pathway for learning and co...

  15. High-flux/high-temperature solar thermal conversion: technology development and advanced applications

    Directory of Open Access Journals (Sweden)

    Romero Manuel

    2016-01-01

    Full Text Available Solar Thermal Power Plants have generated in the last 10 years a dynamic market for renewable energy industry and a pro-active networking within R&D community worldwide. By end 2015, there are about 5 GW installed in the world, most of them still concentrated in only two countries, Spain and the US, though a rapid process of globalization is taking place in the last few years and now ambitious market deployment is starting in countries like South Africa, Chile, Saudi Arabia, India, United Arab Emirates or Morocco. Prices for electricity produced by today's plants fill the range from 12 to 16 c€/kWh and they are capital intensive with investments above 4000 €/kW, depending on the number of hours of thermal storage. The urgent need to speed up the learning curve, by moving forward to LCOE below 10 c€/kWh and the promotion of sun-to-fuel applications, is driving the R&D programmes. Both, industry and R&D community are accelerating the transformation by approaching high-flux/high-temperature technologies and promoting the integration with high-efficiency conversion systems.

  16. Advances in Tumor Screening, Imaging, and Avatar Technologies for High-Grade Serous Ovarian Cancer

    Directory of Open Access Journals (Sweden)

    Anders eOhman

    2014-11-01

    Full Text Available The majority of high-grade serous ovarian carcinoma cases are detected in advanced stages when treatment options are limited. Surgery is less effective at eradicating the disease when it is widespread, resulting in high rates of disease relapse and chemoresistance. Current screening techniques are ineffective for early tumor detection and consequently, BRCA mutations carriers, with an increased risk for developing high-grade serous ovarian cancer, elect to undergo risk-reducing surgery. While prophylactic surgery is associated with a significant reduction in the risk of cancer development, it also results in surgical menopause and significant adverse side effects. The development of efficient early-stage screening protocols and imaging technologies is critical to improving the outcome and quality of life for current patients and women at increased risk. In addition, more accurate animal models are necessary in order to provide relevant in vivo testing systems and advance our understanding of the disease origin and progression. Moreover, both genetically engineered and tumor xenograft animal models enable the preclinical testing of novel imaging techniques and molecularly targeted therapies as they become available. Recent advances in xenograft technologies have made possible the creation of avatar mice, personalized tumorgrafts, which can be used as therapy testing surrogates for individual patients prior to or during treatment. High-grade serous ovarian cancer may be an ideal candidate for use with avatar models based on key characteristics of the tumorgraft platform. This review explores multiple strategies, including novel imaging and screening technologies in both patients and animal models, aimed at detecting cancer in the early stages and improving the disease prognosis.

  17. [New-generation high-throughput technologies based 'omics' research strategy in human disease].

    Science.gov (United States)

    Yang, Xu; Jiao, Rui; Yang, Lin; Wu, Li-Ping; Li, Ying-Rui; Wang, Jun

    2011-08-01

    In recent years, new-generation high-throughput technologies, including next-generation sequencing technology and mass spectrometry method, have been widely applied in solving biological problems, especially in human diseases field. This data driven, large-scale and industrialized research model enables the omnidirectional and multi-level study of human diseases from the perspectives of genomics, transcriptomics and proteomics levels, etc. In this paper, the latest development of the high-throughput technologies that applied in DNA, RNA, epigenomics, metagenomics including proteomics and some applications in translational medicine are reviewed. At genomics level, exome sequencing has been the hot spot of the recent research. However, the predominance of whole genome resequencing in detecting large structural variants within the whole genome level is coming to stand out as the drop of sequencing cost, which also makes it possible for personalized genome based medicine application. At trancriptomics level, e.g., small RNA sequencing can be used to detect known and predict unknown miRNA. Those small RNA could not only be the biomarkers for disease diagnosis and prognosis, but also show the potential of disease treatment. At proteomics level, e.g., target proteomics can be used to detect the possible disease-related protein or peptides, which can be useful index for clinical staging and typing. Furthermore, the application and development of trans-omics study in disease research are briefly introduced. By applying bioinformatics technologies for integrating multi-omics data, the mechanism, diagnosis and therapy of the disease are likely to be systemically explained and realized, so as to provide powerful tools for disease diagnosis and therapies.

  18. Application Of High Speed Photography In Science And Technology

    Science.gov (United States)

    Wu Ji-Zong, Wu; Yu-Ju, Lin

    1983-03-01

    The service works in high-speed photography carried out by the Department of Precision Instruments, Tianjin University are described in this paper. A compensation type high-speed camera was used in these works. The photographic methods adopted and better results achieved in the studies of several technical fields, such as velocity field of flow of overflow surface of high dam, combustion process of internal combustion engine, metal cutting, electrical are welding, experiment of piling of steel tube piles for supporting the marine platforms and characteristics of motion of wrist watch escape mechanism and so on are illustrated in more detail. As the extension of human visual organs and for increasing the abi-lities of observing and studying the high-speed processes, high-speed photography plays a very important role. In order to promote the application and development on high-speed photography, we have carried out the consultative and service works inside and outside Tianjin Uni-versity. The Pentazet 35 compensation type high-speed camera, made in East Germany, was used to record the high-speed events in various kinds of technical investigations and necessary results have been ob-tained. 1. Measurement of flow velocity on the overflow surface of high dam. In the design of a key water control project with high head, it is extremely necessary to determinate various characteristics of flow velocity field on the overflow surface of high dam. Since the water flow on the surface of high overflow dam possesses the features of large flow velocity and shallow water depth, therefore it is difficult to use the conventional current meters such as pilot tube, miniature cur-rent meter or electrical measuring methods of non-electrical quantities for studying this problem. Adopting the high-speed photographic method to study analogously the characteristics of flow velocity field on the overflow surface of high dam is a kind of new measuring method. People

  19. High Temperature Memories in SiC Technology

    OpenAIRE

    Ekström, Mattias

    2014-01-01

    This thesis is part of the Working On Venus (WOV) project. The aim of the project is to design electronics in silicon carbide (SiC) that can withstand the extreme surface environmen  of Venus. This thesis investigates some possible computer memory technologies that could survive on the surface of Venus. A memory must be able to function at 460 °C and after a total radiation dose of at least 200 Gy (SiC). This thesis is a literature survey. The thesis covers several Random-Access Memory (RAM) ...

  20. High Power Electronics - Key Technology for Wind Turbines

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke

    2014-01-01

    In this chapter the developments of technology and market trends in wind power application are discussed. Different wind turbine concepts as well as some dominant and promising power converter solutions are reviewed respectively. Furthermore the control methods, grid demands as well as the emerging...... reliability challenges for the future wind turbines are explained. It is concluded that the wind turbine behavior/performance can be significantly improved by introducing power electronics, and there will be higher requirements for the power electronics performances in wind power application....

  1. Spotlight on Schools. AMAL Aleph Arts and Sciences Technological High School, Petach Tikva.

    Science.gov (United States)

    Rosenfeld, Dina

    1998-01-01

    Israel's AMAL Aleph High School combines advanced technology with regular high school academic studies. This article describes how one English-as-a-Second-Language teacher joined a project to develop an online English student magazine for the Center for Educational Technology Internet site, then used to the project to improve students' English…

  2. FY 1995 Blue Book: High Performance Computing and Communications: Technology for the National Information Infrastructure

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The Federal High Performance Computing and Communications HPCC Program was created to accelerate the development of future generations of high performance computers...

  3. Student Readiness for Technology Enhanced History Education in Turkish High Schools

    Directory of Open Access Journals (Sweden)

    İbrahim Turan

    2010-06-01

    Full Text Available This study examined whether the Turkish high school social sciences major students would feel adequate and fit in atechnology-enhanced educational environment, particularly in history classrooms. To this extent, this study investigated highschool students’ level of proficiency in technology-use and their attitudes toward the use of educational technologies inclassrooms. The data for this study was collected using Kolb’s Learning Style Inventory (LSI Version-3 and a 27-item TechnologyQuestionnaire. The results revealed that from the point of proficiency and attitude Turkish high school social sciences majorstudents have the essential technology skills and knowledge to feel adequate in a technology-enhanced learning environment.They also have positive attitudes toward use of educational technologies in history classrooms. Therefore they seem to beready for technology-enhanced instruction.

  4. High magnetic field ohmically decoupled non-contact technology

    Science.gov (United States)

    Wilgen, John [Oak Ridge, TN; Kisner, Roger [Knoxville, TN; Ludtka, Gerard [Oak Ridge, TN; Ludtka, Gail [Oak Ridge, TN; Jaramillo, Roger [Knoxville, TN

    2009-05-19

    Methods and apparatus are described for high magnetic field ohmically decoupled non-contact treatment of conductive materials in a high magnetic field. A method includes applying a high magnetic field to at least a portion of a conductive material; and applying an inductive magnetic field to at least a fraction of the conductive material to induce a surface current within the fraction of the conductive material, the surface current generating a substantially bi-directional force that defines a vibration. The high magnetic field and the inductive magnetic field are substantially confocal, the fraction of the conductive material is located within the portion of the conductive material and ohmic heating from the surface current is ohmically decoupled from the vibration. An apparatus includes a high magnetic field coil defining an applied high magnetic field; an inductive magnetic field coil coupled to the high magnetic field coil, the inductive magnetic field coil defining an applied inductive magnetic field; and a processing zone located within both the applied high magnetic field and the applied inductive magnetic field. The high magnetic field and the inductive magnetic field are substantially confocal, and ohmic heating of a conductive material located in the processing zone is ohmically decoupled from a vibration of the conductive material.

  5. Proton-irradiation technology for high-frequency high-current silicon welding diode manufacturing

    Science.gov (United States)

    Lagov, P. B.; Drenin, A. S.; Zinoviev, M. A.

    2017-05-01

    Different proton irradiation regimes were tested to provide more than 20 kHz-frequency, soft reverse recovery “snap-less” behavior, low forward voltage drop and leakage current for 50 mm diameter 7 kA/400 V welding diode Al/Si/Mo structure. Silicon diode with such parameters is very suitable for high frequency resistance welding machines of new generation for robotic welding.

  6. Time-Valued-Technology: A Light-Emitting Diode Case Study for Determining Replacement Strategy for High Technology Infrastructure Items

    Science.gov (United States)

    2012-03-22

    viii I. Introduction .....................................................................................................................1...DIODE CASE STUDY FOR DETERMINING REPLACEMENT STRATEGY FOR HIGH TECHNOLOGY INFRASTRUCTURE ITEMS I. Introduction In an effort to support cost... MCDM Models, Algorithms, Theory, and Applications. Kluwer Academic Publishers. Norwell, Ma. GE Commercial Lighting Products. Retrieved 11/2/2011

  7. Final Report of the National Black Health Providers Task Force on High Blood Pressure Education and Control.

    Science.gov (United States)

    Public Health Service (DHHS), Rockville, MD.

    This is the final report of National Black Health Providers Task Force (NBHPTF) on High Blood Pressure Education and Control. The first chapter of the report recounts the history of the NBHPTF and its objectives. In the second chapter epidemiological evidence is presented to demonstrate the need for a suggested 20 year plan aimed at controlling…

  8. High Speed Rail Learning System (HSRLS – Taking Advantage of Online Technologies in Railway Education

    Directory of Open Access Journals (Sweden)

    Pasi T. Lautala, Ph.D., P.E.

    2015-06-01

    Full Text Available The United States has taken initial steps toward developing a high speed rail (HSR network, but the domestic workforce experience and institutional knowledge necessary for the planning, design, construction, and operations of HSR is underdeveloped. This paper describes and provides preliminary assessment of the High Speed Rail Learning System (HSRLS, a demonstration project that seeks to address gaps in HSR knowledge and skills in the US. The HSRLS developers designed an online education system to serve as a clearinghouse for rail-related information and content, connect teachers, trainers, and students at pre-, and postgraduate levels, and to collect demographic and professional information on groups and individuals interested in HSR. The paper explores the technology review, selection process, and content developed. Website visits and demographic information from over 4,000 unique individuals and 600 HSRLS course registrations are analyzed and assessed.

  9. Care to Share? Social innovation through low-budget, high impact welfare technologies

    DEFF Research Database (Denmark)

    Asboe, Mark; Grönvall, Erik; Lassen, Henry Michael

    2011-01-01

    The Western welfare model is under pressure and finding new ways of providing care is a key issue to maintain a reasonable service level for elderly people spending their last years at a nursing home. Personal care at nursing homes tends to (quite reasonably) have high priority at the expense of ...... a successful implementation of more costly technologies. We present a concept named Care to Share? that seeks to bring together professional and family initiated care and that assists in the articulation work of social activities in a nursing home....... of social activities, thus creating situations where a number of elderly people experience loneliness. This paper presents ongoing work that focuses on developing Information and Communication Technology (ICT) for nursing homes that brings together professional care activities and family initiated care. We...... discuss challenges and opportunities for welfare or assistive technology design to support articulation work in a care setting, where both care professionals and family members (of the elderly inhabitants) co-exists. Furthermore, the care sector at hand suffers from economical limitations that challenge...

  10. Hybrid Laser-Arc Welding of the High-Strength Shipbuilding Steels: Equipment and Technology

    Science.gov (United States)

    Turichin, G.; Kuznetsov, M.; Tsibulskiy, I.; Firsova, A.

    Hybrid laser-arc welding (HLAW) allows getting weld joints with thickness up to 35 mm for one pass, provide good quality formation of joints, minimal thermal deformations, the productivity in 10 times more in comparison with arc welding. In addition, replacement arc welding to the HLAW allows economizing filler materials, shielding gas and consumable electricity more than 4 times. Therefore, HLAW is actually technology for basic engineering branches and especially for shipbuilding. The Institute of Laser and Welding Technologies (ILWT) developed laser and hybrid laser-arc welding technologies for different type of steels and alloys including high-strength shipbuilding steels. Also ILWT produced portal and robotic systems for HLAW process realization. Portal system for hybrid laser-arc welding of panels with dimensions 6x6 m using at the manufacturing of flat curvilinear sections in the shipbuilding is depicted in the article. Results of experimental researches of the hybrid laser-arc welding parameters influence on the formation and mechanical properties of weld joint are described at the publication also. Experimental part was made with using of the portal system.

  11. Human Milk Composition and Preservation: Evaluation of High-pressure Processing as a Nonthermal Pasteurization Technology.

    Science.gov (United States)

    Sousa, Sílvia G; Delgadillo, Ivonne; Saraiva, Jorge A

    2016-01-01

    Human milk is seen not only as a food, but as a functional and dynamic biologic system. It provides nutrients, bioactive components, and immune factors, promoting adequate and healthy growth of newborn infants. When mothers cannot supply their children, donated breast milk is the nutrition recommended by the World Health Organization, as it is a better alternative than infant formula. However, because of the manner in which donor milk is handled in human milk banks (HMB) many of the properties ascribed to mother's own milk are diminished or destroyed. The major process responsible for these losses is Holder pasteurization. High-pressure processing (HPP) is a novel nonthermal pasteurization technology that is being increasingly applied in food industries worldwide, primarily as an alternative to thermal treatment. This is due to its capacity to inactivate microorganisms while preserving both nutritional and bioactive components of foods. This review describes human milk composition and preservation, and critically discusses HMB importance and practices, highlighting HPP as a potential nonthermal pasteurization technology for human milk preservation. HPP technology is described and the few currently existing studies of its effects in human milk are presented.

  12. High pressure gas laser technology for atmospheric remote sensing

    Science.gov (United States)

    Javan, A.

    1980-01-01

    The development of a fixed frequency chirp-free and highly stable intense pulsed laser made for Doppler wind velocity measurements with accurate ranging is described. Energy extraction from a high pressure CO2 laser at a tunable single mode frequency is also examined.

  13. Development of a high-performance image server using ATM technology

    Science.gov (United States)

    Do Van, Minh; Humphrey, Louis M.; Ravin, Carl E.

    1996-05-01

    The ability to display digital radiographs to a radiologist in a reasonable time has long been the goal of many PACS. Intelligent routing, or pre-fetching images, has become a solution whereby a system uses a set of rules to route the images to a pre-determined destination. Images would then be stored locally on a workstation for faster display times. Some PACS use a large, centralized storage approach and workstations retrieve images over high bandwidth connections. Another approach to image management is to provide a high performance, clustered storage system. This has the advantage of eliminating the complexity of pre-fetching and allows for rapid image display from anywhere within the hospital. We discuss the development of such a storage device, which provides extremely fast access to images across a local area network. Among the requirements for development of the image server were high performance, DICOM 3.0 compliance, and the use of industry standard components. The completed image server provides performance more than sufficient for use in clinical practice. Setting up modalities to send images to the image server is simple due to the adherence to the DICOM 3.0 specification. Using only off-the-shelf components allows us to keep the cost of the server relatively inexpensive and allows for easy upgrades as technology becomes more advanced. These factors make the image server ideal for use as a clustered storage system in a radiology department.

  14. Application and the key technology on high power fiber-optic laser in laser weapon

    Science.gov (United States)

    Qu, Zhou; Li, Qiushi; Meng, Haihong; Sui, Xin; Zhang, Hongtao; Zhai, Xuhua

    2014-12-01

    The soft-killing laser weapon plays an important role in photoelectric defense technology. It can be used for photoelectric detection, search, blinding of photoelectric sensor and other devices on fire control and guidance devices, therefore it draws more and more attentions by many scholars. High power fiber-optic laser has many virtues such as small volume, simple structure, nimble handling, high efficiency, qualified light beam, easy thermal management, leading to blinding. Consequently, it may be used as the key device of soft-killing laser weapon. The present study introduced the development of high power fiber-optic laser and its main features. Meanwhile the key technology of large mode area (LMA) optical fiber design, the beam combination technology, double-clad fiber technology and pumping optical coupling technology was stated. The present study is aimed to design high doping LMA fiber, ensure single mode output by increasing core diameter and decrease NA. By means of reducing the spontaneous emission particle absorbed by fiber core and Increasing the power density in the optical fiber, the threshold power of nonlinear effect can increase, and the power of single fiber will be improved. Meantime, high power will be obtained by the beam combination technology. Application prospect of high power fiber laser in photoelectric defense technology was also set forth. Lastly, the present study explored the advantages of high power fiber laser in photoelectric defense technology.

  15. The rise and decay of new high-technology ventures

    DEFF Research Database (Denmark)

    Turcan, Romeo V.; Busuncian, Elena

    This study is positioned at the intersection of legitimation and entrepreneurship theories with the aim to uncover the relationship between the process of legitimation and the process of emergence and discontinuous of a new venture. From the legitimation theory perspective, the paper is trying...... to explore how a new venture acquires cognitive legitimacy defined as knowledge about the new activity and what is needed to succeed in an industry, and socio-political legitimacy defined as the value placed on the new activity by various key stakeholders, as well as to explore the respective legitimation...... strategies. From the entrepreneurship theory perspective, the paper aims to explore the process of emergence (identification/creation of new business opportunity and its pursuit) of the new venture, and uncover the relationship between the legitimation of new technology and the new venture on one hand...

  16. Role of advanced RF/microwave technology and high power switch technology for developing/upgrading compact/existing accelerators

    International Nuclear Information System (INIS)

    Shrivastava, Purushottam

    2001-01-01

    With the advances in high power microwave devices as well as in microwave technologies it has become possible to go on higher frequencies at higher powers as well as to go for newer devices which are more efficient and compact and hence reducing the power needs as well as space and weight requirement for accelerators. New devices are now available in higher frequency spectrum for example at C-Band, X-band and even higher. Also new devices like klystrodes/Higher Order Mode Inductive Output Tubes (HOM IOTs) are now becoming competitors for existing tubes which are in use at present accelerator complexes. The design/planning of the accelerators used for particle physics research, medical accelerators, industrial irradiation, or even upcoming Driver Accelerators for Sub Critical Reactors for nuclear power generation are being done taking into account the newer technologies. The accelerators which use magnetrons, klystrons and similar devices at S-Band can be modified/redesigned with devices at higher frequencies like X-Band. Pulsed accelerators need high power high voltage pulsed modulators whereas CW accelerators need high voltage power supplies for functioning of RF / Microwave tubes. There had been a remarkable growth in the development and availability of solid state switches both for switching the pulsed modulators for microwave tubes as well as for making high frequency switch mode power supplies. Present paper discusses some of the advanced devices/technologies in this field as well as their capability to make advanced/compact/reliable accelerators. Microwave systems developed/under development at Centre for Advanced Technology are also discussed briefly along with some of the efforts done to make them compact. An overview of state of art vacuum tube devices and solid state switch technologies is given. (author)

  17. Rapid and high-throughput detection of highly pathogenic bacteria by Ibis PLEX-ID technology.

    Directory of Open Access Journals (Sweden)

    Daniela Jacob

    Full Text Available In this manuscript, we describe the identification of highly pathogenic bacteria using an assay coupling biothreat group-specific PCR with electrospray ionization mass spectrometry (PCR/ESI-MS run on an Ibis PLEX-ID high-throughput platform. The biothreat cluster assay identifies most of the potential bioterrorism-relevant microorganisms including Bacillus anthracis, Francisella tularensis, Yersinia pestis, Burkholderia mallei and pseudomallei, Brucella species, and Coxiella burnetii. DNA from 45 different reference materials with different formulations and different concentrations were chosen and sent to a service screening laboratory that uses the PCR/ESI-MS platform to provide a microbial identification service. The standard reference materials were produced out of a repository built up in the framework of the EU funded project "Establishment of Quality Assurances for Detection of Highly Pathogenic Bacteria of Potential Bioterrorism Risk" (EQADeBa. All samples were correctly identified at least to the genus level.

  18. Desalination and reuse of high-salinity shale gas produced water: drivers, technologies, and future directions.

    Science.gov (United States)

    Shaffer, Devin L; Arias Chavez, Laura H; Ben-Sasson, Moshe; Romero-Vargas Castrillón, Santiago; Yip, Ngai Yin; Elimelech, Menachem

    2013-09-03

    In the rapidly developing shale gas industry, managing produced water is a major challenge for maintaining the profitability of shale gas extraction while protecting public health and the environment. We review the current state of practice for produced water management across the United States and discuss the interrelated regulatory, infrastructure, and economic drivers for produced water reuse. Within this framework, we examine the Marcellus shale play, a region in the eastern United States where produced water is currently reused without desalination. In the Marcellus region, and in other shale plays worldwide with similar constraints, contraction of current reuse opportunities within the shale gas industry and growing restrictions on produced water disposal will provide strong incentives for produced water desalination for reuse outside the industry. The most challenging scenarios for the selection of desalination for reuse over other management strategies will be those involving high-salinity produced water, which must be desalinated with thermal separation processes. We explore desalination technologies for treatment of high-salinity shale gas produced water, and we critically review mechanical vapor compression (MVC), membrane distillation (MD), and forward osmosis (FO) as the technologies best suited for desalination of high-salinity produced water for reuse outside the shale gas industry. The advantages and challenges of applying MVC, MD, and FO technologies to produced water desalination are discussed, and directions for future research and development are identified. We find that desalination for reuse of produced water is technically feasible and can be economically relevant. However, because produced water management is primarily an economic decision, expanding desalination for reuse is dependent on process and material improvements to reduce capital and operating costs.

  19. Next Generation Modeling Technology for High Speed Rotorcraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Recent R&D associated with designing high speed rotorcraft has been greatly hampered by a lack of test data and confidence in predictions for rotors operating...

  20. Structured Innovation of High-Performance Wave Energy Converter Technology: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Jochem W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Laird, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-01-25

    Wave energy converter (WEC) technology development has not yet delivered the desired commercial maturity nor, and more importantly, the techno-economic performance. The reasons for this have been recognized and fundamental requirements for successful WEC technology development have been identified. This paper describes a multi-year project pursued in collaboration by the National Renewable Energy Laboratory and Sandia National Laboratories to innovate and develop new WEC technology. It specifies the project strategy, shows how this differs from the state-of-the-art approach and presents some early project results. Based on the specification of fundamental functional requirements of WEC technology, structured innovation and systemic problem solving methodologies are applied to invent and identify new WEC technology concepts. Using Technology Performance Levels (TPL) as an assessment metric of the techno-economic performance potential, high performance technology concepts are identified and selected for further development. System performance is numerically modelled and optimized and key performance aspects are empirically validated. The project deliverables are WEC technology specifications of high techno-economic performance technologies of TPL 7 or higher at TRL 3 with some key technology challenges investigated at higher TRL. These wave energy converter technology specifications will be made available to industry for further, full development and commercialisation (TRL 4 - TRL 9).

  1. Analysis of the lack of scientific and technological talents of high-level women in China

    Science.gov (United States)

    Lin, Wang

    2017-08-01

    The growth and development of high-level female scientific and technological talents has become a global problem, facing severe challenges. The lack of high-level women in science and technology has become a global problem. How to recruit and help female scientists and technological talents grow raises awareness from the industry. To find out the main reasons for the lack of high-level female scientific and technological talent. This paper analyses the impact of gender discrimination on the lack of high-level female scientific and technological talents, the impact of disciplinary differences on female roles. The main reasons are: women’s natural disadvantage of mathematical thinking; female birth, the traditional culture on the role of women and the impact of values.

  2. Techno-economic feasibility study of providing variable frequency drive for high pressure pump, SWRO Plant at NDDP, Kalpakkam

    International Nuclear Information System (INIS)

    Nagaraj, R.; Murugan, V.; Dangore, A.Y.; Thalor, K.L.; Prabakar, S.; Srivastava, V.K.; Tewari, P.K.

    2010-01-01

    The cost of product water is a key factor in determination of acceptability of any desalination system and plant. In case of Sea Water Reverse Osmosis plants, most of the energy consumed is in the form of electricity. The efficiency of the Reverse Osmosis plant primarily lies in optimization of the power consumption. The High Pressure pump is the single major energy consuming equipment with a share of above 75%. Hence reduction in energy consumed by high pressure pump will have a substantial effect on the overall energy consumption. Also the high pressure pump being a high inertia load requires very high torque at the time of starting. This high starting torque requirement results in increased acceleration time of the motor which subsequently increases the strain on the upstream electrical system from motor feeder to transformer. Such starting characteristic necessitates provision of special starting scheme for the high pressure pump motors. Provision of a Variable Frequency Drive can be a solution for both the above problems. This paper studies the techno-economic feasibility of providing variable frequency drive for high pressure pump motor at NDDP, Kalpakkam. (author)

  3. High School Engineering and Technology Education Integration through Design Challenges

    Science.gov (United States)

    Mentzer, Nathan

    2011-01-01

    This study contextualized the use of the engineering design process by providing descriptions of how each element in a design process was integrated in an eleventh grade industry and engineering systems course. The guiding research question for this inquiry was: How do students engage in the engineering design process in a course where technology…

  4. High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M.; Gilbride, T.; Ruiz, K.; Steward, H.; Love, P.

    2007-06-01

    This document is the sixth volume of the Building America Best Practices Series. It presents information that is useful throughout the United States for enhancing the energy efficiency practices in the specific climate zones that are presented in the first five Best Practices volumes. It provides an introduction to current photovoltaic and solar thermal building practices. Information about window selection and shading is included.

  5. Development of Monascus fermentation technology for high hypolipidemic effect.

    Science.gov (United States)

    Lee, Chun-Lin; Pan, Tzu-Ming

    2012-06-01

    Monascus species has been used as the traditional food fungus in Eastern Asia for several centuries. Monascus-fermented products are gradually developed as the popular functional food for the prevention of cardiovascular disease, but we know that culture condition affects the hypolipidemic effect of Monascus-fermented product. In the past, the cholesterol-lowering agent--monacolin K--is regarded as the most important hypolipidemic agent. Two natural yellow pigments--monascin and ankaflavin--are also proven as novel hypolipidemic agents in recent years. However, the hypolipidemic effect of Monascus-fermented product should contribute from monacolin K, monascin, ankaflavin, and other unknown functional ingredients. In addition to hypolipidemic effect, the safety concern of Monascus-fermented product is involved in the levels of mycotoxin--citrinin. The hypolipidemic effect and the production of these functional metabolites or mycotoxin are influenced by many factors such as the choice of culture substrates, carbon and nitrogen source, pH value, extra nutrients, and so on. Therefore, this review focused on the effect of various culture conditions and nutrients on the functional metabolites production, hypolipidemic effect as well as citrinin concentration, and further organized the fermentation technologies used by previous studies for the promotion of hypolipidemic effect and safety.

  6. Emerging Applications for High K Materials in VLSI Technology

    Directory of Open Access Journals (Sweden)

    Robert D. Clark

    2014-04-01

    Full Text Available The current status of High K dielectrics in Very Large Scale Integrated circuit (VLSI manufacturing for leading edge Dynamic Random Access Memory (DRAM and Complementary Metal Oxide Semiconductor (CMOS applications is summarized along with the deposition methods and general equipment types employed. Emerging applications for High K dielectrics in future CMOS are described as well for implementations in 10 nm and beyond nodes. Additional emerging applications for High K dielectrics include Resistive RAM memories, Metal-Insulator-Metal (MIM diodes, Ferroelectric logic and memory devices, and as mask layers for patterning. Atomic Layer Deposition (ALD is a common and proven deposition method for all of the applications discussed for use in future VLSI manufacturing.

  7. Development of high level radwaste treatment and conversion technology. Transmutation technology development

    International Nuclear Information System (INIS)

    Park, Won Suk; Song, T. Y.; Kim, Y. H.

    2001-03-01

    The final disposition of spent fuel has been, and continues to be, an important issue of nuclear industry. The conceptual design for the accelerator driven transmutation system HYPER is scheduled to be completed by the year of 2006. As the first step for the conceptual design, a study to determine 1. sub-critical core characteristics, 2. fuel concept, 3. coolant system concept, 4. spallation target concept for the HYPER was performed from 1997 to 2000. Most of concept studies were done on the literature basis. The major objectives of the study is to give a guid-line for the second stage research which will be performed during 2001-2003. In addition, the technologies related with TRU-Zr fuel and Pb-Bi coolant can be utilized for the future nuclear reactor development such as generation 4

  8. High Temperature Syngas Cleanup Technology Scale-up and Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, Ben [Research Triangle Inst. (RTI), Research Triangle Park, NC (United States); Turk, Brian [Research Triangle Inst. (RTI), Research Triangle Park, NC (United States); Denton, David [Research Triangle Inst. (RTI), Research Triangle Park, NC (United States); Gupta, Raghubir [Research Triangle Inst. (RTI), Research Triangle Park, NC (United States)

    2015-09-30

    Gasification is a technology for clean energy conversion of diverse feedstocks into a wide variety of useful products such as chemicals, fertilizers, fuels, electric power, and hydrogen. Existing technologies can be employed to clean the syngas from gasification processes to meet the demands of such applications, but they are expensive to build and operate and consume a significant fraction of overall parasitic energy requirements, thus lowering overall process efficiency. RTI International has developed a warm syngas desulfurization process (WDP) utilizing a transport-bed reactor design and a proprietary attrition-resistant, high-capacity solid sorbent with excellent performance replicated at lab, bench, and pilot scales. Results indicated that WDP technology can improve both efficiency and cost of gasification plants. The WDP technology achieved ~99.9% removal of total sulfur (as either H2S or COS) from coal-derived syngas at temperatures as high as 600°C and over a wide range of pressures (20-80 bar, pressure independent performance) and sulfur concentrations. Based on the success of these tests, RTI negotiated a cooperative agreement with the U.S. Department of Energy for precommercial testing of this technology at Tampa Electric Company’s Polk Power Station IGCC facility in Tampa, Florida. The project scope also included a sweet water-gas-shift process for hydrogen enrichment and an activated amine process for 90+% total carbon capture. Because the activated amine process provides some additional non-selective sulfur removal, the integration of these processes was expected to reduce overall sulfur in the syngas to sub-ppmv concentrations, suitable for most syngas applications. The overall objective of this project was to mitigate the technical risks associated with the scale up and integration of the WDP and carbon dioxide capture technologies, enabling subsequent commercial-scale demonstration. The warm syngas cleanup pre-commercial test unit

  9. Improving maternal and neonatal departments in high and low resource settings: the opinion of local health providers.

    Science.gov (United States)

    Trevisanuto, Daniele; Bavuusuren, Bayasgalantai; Wickramasinghe, Chandani S; Dharmaratne, Saminda M; Doglioni, Nicoletta; Giordan, Alessia; Zanardo, Vincenzo; Carlo, Waldemar A

    2011-10-01

    We compared local health caregivers' opinions regarding the priority areas for improving the maternal and neonatal departments in low and high resource countries. Personnel involved in maternal and neonatal care operating in level III, teaching hospitals in four countries (Sri Lanka, Mongolia, USA, and Italy) were asked to fill out an anonymous, written questionnaire. The questionnaire was completed by 1112 out of 1265 (87.9%) participants. "Personnel's education" was classified as the first most important intervention by health providers working in high (49.0%) as well as in low (29.9%) resource countries, respectively. Improvement in salary, equipment, internet access, and organizational protocols were considered as the most important interventions by a significantly larger percentage of personnel from low resource countries in comparison with those from high resource countries. Health providers from high resource countries considered organizational aspects (to define specific roles and responsibilities) as a priority more frequently than their colleagues from low resource countries. Although education of personnel was valued as the highest priority for improving maternal and neonatal departments there are substantial differences in priorities associated with the working setting. Local caregivers' opinion may contribute to better design interventions in settings with high or limited resources.

  10. TEACHING, COEXISTENCE AND ATTENDANCE AT A TECHNOLOGICAL HIGH SCHOOL

    Directory of Open Access Journals (Sweden)

    Leticia Carranza-Peña

    2015-01-01

    Full Text Available This article, which stems from ethnographic research, shows the importance of faculty intervention in the classroom setting in encouraging student attendance. Our findings indicate that the habitus the educator establishes can either encourage youth to continue their studies, or lead them to drop out, thus placing them at risk of addictions, illegal activities, unemployment or low-paid jobs. The Pedagogy of Hope therefore provides an option for effecting large-scale changes in personal, school, family, community and socio-economic conditions. The paper’s conclusions include providing training to teaching faculties on coexistence issues; ensuring coordination between school and family, and emphasizing an integral approach to education as means of promoting school attendance.

  11. Toward a sustainable biorefinery using high-gravity technology

    DEFF Research Database (Denmark)

    Xiros, Charilaos; Janssen, Matty; Bystrom, Roberth

    2017-01-01

    at high gravity, i.e., a process operating at the highest possible concentrations of raw material. The results and opinions presented here are the result of a Nordic collaborative study within the framework of the HG Biofuels project. Processes with bioethanol or biobutanol as target products were studied...

  12. New detection technologies for ultra-high energy cosmic rays and neutrinos

    Directory of Open Access Journals (Sweden)

    Böser Sebastian

    2013-06-01

    Full Text Available Even with an accumulated data set from an integrated six years of lifetime from the Auger experiment, no point sources of charged cosmic rays have be identified at the highest energies. Significantly increased apertures such as promised by the JEMEUSO mission will be required to identify these sources from the cosmic ray signatures themselves. However, in employing water-cherenkov surface detectors as well as fluorescence telescopes, Auger has demonstrated the power provided by the hybrid technology approach. New detection technologies thus provide a valuable tool, in particular for the study of systematic effects. Over the past decade, in particular radio detection of cosmic ray air-showers has become a viable future detection technology to enhance and complement existing air-shower experiments. Following the proof-of-principle provided by the Lopes experiment, this technology is now being pursued in all major air-shower detectors. In the MHz regime, the radio signal is dominated by geomagnetic emission from the electrons deflected in the earth magnetic field, with secondary contributions from a global charge excess. As the majority of the energy in the shower is carried by these electron and the radio signal traverses the atmosphere basically unattenuated, this approach not only promises superior energy resolution but may also provide an independent handle on the longitudinal shower development and hence the primary composition. Theoretical signal predictions provided by detailed Monte-Carlo simulations as well as analytic shower parametrizations are in good agreement with measurements provided by the AERA and Codalema experiments. Recent efforts also include studies of the radio emission in the GHz regime, where the ambient noise is significantly reduced, yet the emission mechanism in this regime has not been firmly established yet. As neutrinos are not deflected in the intergalactic magnetic fields, the detection of neutrino-induced cascades

  13. Normal accidents: Living with high-risk technologies

    International Nuclear Information System (INIS)

    Perrow, Ch.

    1984-01-01

    It was a major nuclear accident, the one at Three Mile Island in 1979, that turned Perrow's attention to accidents in general. A specialist in the sociology of organizations, he soon learned that events at TMI were not simply the result of an engineering failure or the result of operator error; rather, they were a consequence of systems failure. What the author learned from his research into the accident at TMI is that there was no coherent theory of accidents in either the engineering or the social science literature, so he set out to create one. This book discusses the science of accident research. Since Perrow is an outsider to all of the many technical fields reviewed in the book, ranging from nuclear power to marine transport to DNA research, experts may challenge his sources and point out his errors. Perrow's central thesis is that accidents are inevitable - that is, they are ''normal'' - in technologies that have two system characteristics that he terms ''interactive complexity'' and ''tight coupling''. Using these concepts, Perrow constructs a theory of systems which he believes to be unique in the literature on accidents and the literature on organizations. His theory concentrates upon the properties of systems themselves, rather than on the errors that owners, designers and operators make in running them. He seeks a more basic explanation than operator error; faulty design or equipment; inadequately trained personnel; or the system is too big, under-financed or mismanaged. Nuclear power in the United States may not survive its current economic and regulatory troubles, but discussion continues. Only a small part of the debate concerns plant safety: economic competitiveness, nuclear arms proliferation and nuclear waste disposal are the salient themes

  14. Innovative Technology of Mechanized Wet Underwater Welding of High-Alloy Corrosion Resistant Steel

    Directory of Open Access Journals (Sweden)

    Kakhovskyi, M.Yu.

    2015-07-01

    Full Text Available The results of the practice of welding-repair technology using self-shielded flux-cored wire for wet underwater welding of high-alloy stainless steels type 18-10 are presented. The application of the technology allows reducing human participation in welding process under the extreme conditions. The practical value of the technology consists in the possibility of welding-repair works directly under water without any additional assembly works.

  15. Relation between Learning Content in Elementary School and Technology Education in Junior High School

    OpenAIRE

    白崎, 清; 山本, 利一

    2009-01-01

    The relation between learning content in the elementary school and Technology education in junior high school was investigated. The object of the investigation was ministry’s curriculumguideline. As the result, the relation between Technology education and Society, Science, Arithmetic, Drawing and Handicrafts and Life Environment Studies was confirmed. It is important to make the guidance plan in respect of this relation, when the technology education course studys it.

  16. Revisit of Energy Use and Technologies of High Performance Buildings

    OpenAIRE

    Li Ph.D., Cheng

    2014-01-01

    Energy consumed by buildings accounts for one third of the world?s total primary energy use. Associated with the conscious of energy savings in buildings, High Performance Buildings (HPBs) has surged across the world, with wide promotion and adoption of various performance rating and certification systems. It is valuable to look into the actual energy performance of HPBs and to understand their influencing factors. To shed some light on this topic, this paper conducted a series of portfoli...

  17. Kajian Teknologi High Altitude Platform (HAP [Study of High Altitude Platform (HAP Technology

    Directory of Open Access Journals (Sweden)

    Amry Daulat Gultom

    2016-07-01

    Full Text Available High Altitude Platform (HAP merupakan solusi alternatif untuk mengatasi keterbatasan infrastruktur terestrial maupun satelit. HAP merupakan pesawat ataupun balon udara yang ditempatkan pada ketinggian 20-50 km di atas permukaan bumi. Kelebihan yang utama dari HAP adalah kemudahan dalam penempatan, fleksibilitas, biaya operasionalnya rendah, delay  propagasi rendah, sudut elevasi lebar, cakupan yang luas. Penelitian ini dilakukan untuk mengetahui potensi HAP untuk komunikasi pita lebar dan perkembangannya di Indonesia. Analisis dilakukan secara deskriptif dengan mengolah data literatur yang didapat. Hasil penelitian menunjukkan bahwa di Indonesia terdapat potensi teknologi HAP untuk komunikasi pita lebar dengan lebar pita 2x300 MHz di band 27,9-28,2 GHz dan 31-31,3 GHz. Namun, belum ada peraturan yang mengatur alokasi frekuensi untuk HAP secara khusus di Indonesia.*****High Altitude Platform (HAP has been developed as an alternative solution in order to overcome limitation of terrestrial and satellite communication system. HAP is an aircraft or balloon situated on 20-50 km above the earth. Main advantages of HAP are flexibility in deployment, low propagation delay, wide elevation angle and broad coverage. The research is conducted to gather HAP potential for broadband communication and its development in Indonesia. Analysis is conducted by descriptive analysis from literature study gather. The research result shows that in Indonesia, there is potential of HAP technology for broadband communication with 2x300 MHz bandwidth within 27,9-28,2 GHz and 31-31,3 GHz. Yet, there are no specific regulations managing frequency allocation for HAP in Indonesia.

  18. Technology for the detection of airborne intruders approaching the high-security high-value asset

    Science.gov (United States)

    Greneker, Eugene F., III

    1995-05-01

    Security plans to protect high-value assets usually concentrate on stopping potential ground intruders before they reach the asset. Barriers, such as fences, are the first line of defense against the found intruder, providing a delay mechanism. The sight of 10 to 12 foot high fencing topped with razor wire, guard towers, and roving patrols also serves as a psychological deterrent to the potential ground intrusion sensors between an outer and an inner barrier. This visible 'hardness' of a high-value asset makes airborne penetration more attractive, even though the airborne intruder may require training in the use of an aircraft or other airborne conveyance system. Certain airborne intrusion scenarios allow an adversary to penetrate much deeper and faster through delay and defense systems designed to deter the ground intruder. Since an airborne intruder can quickly reach the high-value asset, early detection critical to asset defense. Early detection of the airborne intruder also ensures appropriate use of the deadly force doctrine because the guard force has time to coordinate the response.

  19. High-technology exports of EEC countries: Persistence and diversity of specialization patterns

    International Nuclear Information System (INIS)

    Papagni, E.

    1992-01-01

    This analysis of the persistence and diversity of specialization patterns in EEC high technology exports is based on a package of products selected from the Eurostat database, COMEXT. High technology goods are considered as an innovative output indicator. A test of hypotheses of hysteresis and diversity of trade patterns at a national level is performed to verify some claims made by the 'evolutionary' theory of innovation and trade. The three-mode principal component analysis carried out confirms the persistence of specialization patterns of each EEC country in high technology exports, and highlights their sharp differences

  20. A high performance, high precision, low cost rapid prototyping and manufacturing technology

    OpenAIRE

    Viacheslav R. Shulunov

    2014-01-01

    A novel roll powder sintering (RPS) technology is proposed for processing real plastic, ceramic, metal and other 3-D objects 1m³ (or more) in volume directly from a CAD model within several hours. The breakthrough advantages of the technology are compared to the dominant rapid prototyping and manufacturing (RP&M) processes that are currently on the market.

  1. Microwave photonics technologies supporting high capacity and flexible wireless communications systems

    DEFF Research Database (Denmark)

    Lu, Xiaofeng; Tatarczak, Anna; Rommel, Simon

    2015-01-01

    Emerging 5G wireless systems require technologies for increased capacity, guarantee robustness, low latency and flexibility. We review a number of approaches to provide the above based on microwave photonics and hybrid optical fiber-wireless communication techniques.......Emerging 5G wireless systems require technologies for increased capacity, guarantee robustness, low latency and flexibility. We review a number of approaches to provide the above based on microwave photonics and hybrid optical fiber-wireless communication techniques....

  2. Magnetic Refrigeration Technology for High Efficiency Air Conditioning

    Energy Technology Data Exchange (ETDEWEB)

    Boeder, A; Zimm, C

    2006-09-30

    Magnetic refrigeration was investigated as an efficient, environmentally friendly, flexible alternative to conventional residential vapor compression central air conditioning systems. Finite element analysis (FEA) models of advanced geometry active magnetic regenerator (AMR) beds were developed to minimize bed size and thus magnet mass by optimizing geometry for fluid flow and heat transfer and other losses. Conventional and magnetocaloric material (MCM) regenerator fabrication and assembly techniques were developed and advanced geometry passive regenerators were built and tested. A subscale engineering prototype (SEP) magnetic air conditioner was designed, constructed and tested. A model of the AMR cycle, combined with knowledge from passive regenerator experiments and FEA results, was used to design the regenerator beds. A 1.5 Tesla permanent magnet assembly was designed using FEA and the bed structure and plenum design was extensively optimized using FEA. The SEP is a flexible magnetic refrigeration platform, with individually instrumented beds and high flow rate and high frequency capability, although the current advanced regenerator geometry beds do not meet performance expectations, probably due to manufacturing and assembly tolerances. A model of the AMR cycle was used to optimize the design of a 3 ton capacity magnetic air conditioner, and the system design was iterated to minimize external parasitic losses such as heat exchanger pressure drop and fan power. The manufacturing cost for the entire air conditioning system was estimated, and while the estimated SEER efficiency is high, the magnetic air conditioning system is not cost competitive as currently configured. The 3 ton study results indicate that there are other applications where magnetic refrigeration is anticipated to have cost advantages over conventional systems, especially applications where magnetic refrigeration, through the use of its aqueous heat transfer fluid, could eliminate intermediate

  3. High-Speed EMU TCMS Design and LCC Technology Research

    Directory of Open Access Journals (Sweden)

    Hongwei Zhao

    2017-02-01

    Full Text Available This paper introduces the high-speed electrical multiple unit (EMU life cycle, including the design, manufacturing, testing, and maintenance stages. It also presents the train control and monitoring system (TCMS software development platform, the TCMS testing and verification bench, the EMU driving simulation platform, and the EMU remote data transmittal and maintenance platform. All these platforms and benches combined together make up the EMU life cycle cost (LCC system. Each platform facilitates EMU LCC management and is an important part of the system.

  4. High temperature superconductivity: Hope of a new technology

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    Following the sensational report in 1986 from the IBM laboratory in Rueschlikon, Switzerland, that superconductivity - that permanent flow of current at temperatures close to absolute zero - is also possible at higher temperatures, the waves of enthusiasm among scientists at first rose high. They talked of a revolution in electrotechnology, especially since superconductors at room temperature seemed to have almost come within reach. In the meantime their thoughts on the matter are much more down to earth. What are the realistic fields of application for the 'new superconductors'? The questions are discussed by scientists, politicians and engineers. (orig.) [de

  5. Development of base technology for high burnup PWR fuel improvement Volume 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yang Eun; Lee, Sang Hee; Bae, Seong Man [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center; Chung, Jin Gon; Chung, Sun Kyo; Kim, Sun Du [Korea Atomic Energy Research Inst., Daeduk (Korea, Republic of); Kim, Jae Won; Chung, Sun Kyo; Kim, Sun Du [Korea Nuclear Fuel Development Inst., Seoul (Korea, Republic of)

    1995-12-31

    Development of base technology for high burnup nuclear fuel -Development of UO{sub 2} pellet manufacturing technology -Improvement of fuel rod performance code -Improvement of plenum spring design -Study on the mechanical characteristics of fuel cladding -Organization of fuel failure mechanism Establishment of next stage R and D program (author). 226 refs., 100 figs.

  6. Development and Implementation of High School Chemistry Modules Using Touch-Screen Technologies

    Science.gov (United States)

    Lewis, Maurica S.; Zhao, Jinhui; Montclare, Jin Kim

    2012-01-01

    Technology was employed to motivate and captivate students while enriching their in-class education. An outreach program is described that involved college mentors introducing touch-screen technology into a high school chemistry classroom. Three modules were developed, with two of them specifically tailored to encourage comprehension of molecular…

  7. Technology alternatives towards low-cost and high-speed interconnect manufacturing

    NARCIS (Netherlands)

    Roozeboom, F.; Kniknie, B.; Lankhorst, A.M.; Winands, G.; Poodt, P.; Dingemans, G.; Keuning, W.; Kessels, W.M.M.; Bullema, J.E.; Bressers, P.M.M.C.; Oosterhuis, G.; Mueller, M.; Huis in 't Veld, Bert

    2012-01-01

    In this work we will review our recent work on novel alternative and disruptive technology concepts with industrial potential for cost-effective and high-speed interconnect manufacturing, in particular on the creation (drilling and filling) of advanced interconnects like TSVs. These technologies are

  8. STRATEGIES AND TECHNOLOGY FOR MANAGING HIGH-CARBON ASH

    Energy Technology Data Exchange (ETDEWEB)

    Robert Hurt; Eric Suuberg; John Veranth; Xu Chen

    2003-05-20

    The overall objective of the present project is to identify and assess strategies and solutions for the management of industry problems related to carbon in ash. Specific research issues to be addressed include: (1) the effect of parent fuel selection on ash properties and adsorptivity, including a first ever examination of the air entrainment behavior of ashes from alternative (non-coal) fuels; (2) the effect of various low-NOx firing modes on ash properties and adsorptivity; and (3) the kinetics and mechanism of ash ozonation. This data will provide scientific and engineering support of the ongoing process development activities. During this fourth project period we completed the characterization of ozone-treated carbon surfaces and wrote a comprehensive report on the mechanism through which ozone suppresses the adsorption of concrete surfactants.

  9. STRATEGIES AND TECHNOLOGY FOR MANAGING HIGH-CARBON ASH

    Energy Technology Data Exchange (ETDEWEB)

    Robert Hurt; Eric Suuberg; John Veranth; Xu Chen

    2002-09-10

    The overall objective of the present project is to identify and assess strategies and solutions for the management of industry problems related to carbon in ash. Specific research issues to be addressed include: (1) the effect of parent fuel selection on ash properties and adsorptivity, including a first ever examination of the air entrainment behavior of ashes from alternative (non-coal) fuels; (2) the effect of various low-NOx firing modes on ash properties and adsorptivity; and (3) the kinetics and mechanism of ash ozonation. This data will provide scientific and engineering support of the ongoing process development activities. During this fourth project period we completed the characterization of ozone-treated carbon surfaces and wrote a comprehensive report on the mechanism through which ozone suppresses the adsorption of concrete surfactants.

  10. Reliability engineering for nuclear and other high technology systems

    International Nuclear Information System (INIS)

    Lakner, A.A.; Anderson, R.T.

    1985-01-01

    This book is written for the reliability instructor, program manager, system engineer, design engineer, reliability engineer, nuclear regulator, probability risk assessment (PRA) analyst, general manager and others who are involved in system hardware acquisition, design and operation and are concerned with plant safety and operational cost-effectiveness. It provides criteria, guidelines and comprehensive engineering data affecting reliability; it covers the key aspects of system reliability as it relates to conceptual planning, cost tradeoff decisions, specification, contractor selection, design, test and plant acceptance and operation. It treats reliability as an integrated methodology, explicitly describing life cycle management techniques as well as the basic elements of a total hardware development program, including: reliability parameters and design improvement attributes, reliability testing, reliability engineering and control. It describes how these elements can be defined during procurement, and implemented during design and development to yield reliable equipment. (author)

  11. Electron energy loss spectrometers the technology of high performance

    CERN Document Server

    Ibach, Harald

    1991-01-01

    Electron energy loss spectroscopy has become an indispensable tool in surface analysis Although the basic physics of this technique is well understood, instrument design has previously largely been left to intuition This book is the first to provide a comprehensive treatment of the electron optics involved in the production of intense monochromatic beams and the detection of scattered electrons It includes a full three-dimensional analysis of the electron optical properties of electron emission systems, monochromators and lens systems, placing particular emphasis on the procedures for matching the various components The description is kept mathematically simple and focuses on practical aspects, with many hints for writing computer codes to calculate and optimize electrostatic lens elements

  12. Long-term high-level waste technology. Composite report

    Science.gov (United States)

    Cornman, W. R.

    1981-12-01

    Research and development studies on the immobilization of high-level wastes from the chemical reprocessing of nuclear reactor fuels are summarized. The reports are grouped under the following tasks: (1) program management and support; (2) waste preparation; (3) waste fixation; and (4) final handling. Some of the highlights are: leaching properties were obtained for titanate and tailored ceramic materials being developed at ICPP to immobilize zirconia calcine; comparative leach tests, hot-cell tests, and process evaluations were conducted of waste form alternatives to borosilicate glass for the immobilization of SRP high-level wastes, experiments were run at ANL to qualify neutron activation analysis and radioactive tracers for measuring leach rates from simulated waste glasses; comparative leach test samples of SYNROC D were prepared, characterized, and tested at LLNL; encapsulation of glass marbles with lead or lead alloys was demonstrated on an engineering scale at PNL; a canister for reference Commercial HLW was designed at PNL; a study of the optimization of salt-crete was completed at SRL; a risk assessment showed that an investment for tornado dampers in the interim storage building of the DWPF is unjustified.

  13. High temperature gas-cooled reactor (HTGR) graphite pebble fuel: Review of technologies for reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Mcwilliams, A. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-09-08

    This report reviews literature on reprocessing high temperature gas-cooled reactor graphite fuel components. A basic review of the various fuel components used in the pebble bed type reactors is provided along with a survey of synthesis methods for the fabrication of the fuel components. Several disposal options are considered for the graphite pebble fuel elements including the storage of intact pebbles, volume reduction by separating the graphite from fuel kernels, and complete processing of the pebbles for waste storage. Existing methods for graphite removal are presented and generally consist of mechanical separation techniques such as crushing and grinding chemical techniques through the use of acid digestion and oxidation. Potential methods for reprocessing the graphite pebbles include improvements to existing methods and novel technologies that have not previously been investigated for nuclear graphite waste applications. The best overall method will be dependent on the desired final waste form and needs to factor in the technical efficiency, political concerns, cost, and implementation.

  14. Libraries as a venue for exciting education technology, both high tech and low

    Science.gov (United States)

    Harold, J. B.; Dusenbery, P.; Holland, A.

    2016-12-01

    Public libraries provide a broad range of possibilities for reaching diverse audiences with NASA and STEM related content and activities, from hands-on activities, to interactive kiosks incorporating science based games, simulations, and real-time data. NCIL/SSI has been developing STEM-based exhibits and program activities for public libraries since 2007, and is currently managing 7 national tours in partnership with the American Library Association and other organizations. Past and current exhibitions will reach over 100 libraries and an estimated 1.5 million patrons. In this paper we will discuss a range of findings from almost a decade of deploying both high and low tech STEM learning strategies into libraries, including usage and engagement by library patrons, and challenges (and solutions) for deploying technologically sophisticated components into libraries which may or may not have dedicated technical staff.

  15. High precision 3D coordinates location technology for pellet

    International Nuclear Information System (INIS)

    Fan Yong; Zhang Jiacheng; Zhou Jingbin; Tang Jun; Xiao Decheng; Wang Chuanke; Dong Jianjun

    2010-01-01

    In inertial confinement fusion (ICF) system, manual way has been used to collimate the pellet traditionally, which is time-consuming and low-level automated. A new method based on Binocular Vision is proposed, which can place the prospecting apparatus on the public diagnosis platform to reach relevant engineering target and uses the high precision two dimension calibration board. Iterative method is adopted to satisfy 0.1 pixel for corner extraction precision. Furthermore, SVD decomposition is used to remove the singularity corners and advanced Zhang's calibration method is applied to promote camera calibration precision. Experiments indicate that the RMS of three dimension coordinate measurement precision is 25 μm, and the max system RMS of distance measurement is better than 100 μm, satisfying the system index requirement. (authors)

  16. High Density Memory Based on Quantum Device Technology

    Science.gov (United States)

    vanderWagt, Paul; Frazier, Gary; Tang, Hao

    1995-01-01

    We explore the feasibility of ultra-high density memory based on quantum devices. Starting from overall constraints on chip area, power consumption, access speed, and noise margin, we deduce boundaries on single cell parameters such as required operating voltage and standby current. Next, the possible role of quantum devices is examined. Since the most mature quantum device, the resonant tunneling diode (RTD) can easily be integrated vertically, it naturally leads to the issue of 3D integrated memory. We propose a novel method of addressing vertically integrated bistable two-terminal devices, such as resonant tunneling diodes (RTD) and Esaki diodes, that avoids individual physical contacts. The new concept has been demonstrated experimentally in memory cells of field effect transistors (FET's) and stacked RTD's.

  17. Applications of high-temperature superconductors in power technology

    International Nuclear Information System (INIS)

    Hull, John R

    2003-01-01

    Since the discovery of the first high-temperature superconductors (HTSs) in the late 1980s, many materials and families of materials have been discovered that exhibit superconductivity at temperatures well above 20 K. Of these, several families of HTSs have been developed for use in electrical power applications. Demonstration of devices such as motors, generators, transmission lines, transformers, fault-current limiters, and flywheels in which HTSs and bulk HTSs have been used has proceeded to ever larger scales. First-generation wire, made from bismuth-based copper oxides, was used in many demonstrations. The rapid development of second-generation wire, made by depositing thin films of yttrium-based copper oxide on metallic substrates, is expected to further accelerate commercial applications. Bulk HTSs, in which large single-grain crystals are used as basic magnetic components, have also been developed and have potential for electrical power applications

  18. Technological aspects of lift-slab method in high-rise-building construction.

    Science.gov (United States)

    Gaidukov, Pavel V.; Pugach, Evgeny M.

    2018-03-01

    The utilization efficiency of slab lifting technology for high-rise-building construction is regarded in the present article. The main problem of the article is organizing technology abilities indication, which proves the method application possibility. There is the comparing of lifting technologies and sequential concrete-frame extension, as follows: the first one: the parameters are defined, and the second one: the organizational model is executed. This model defines borders of the usage methods, as well. There is the mathematic model creating, which describes boundary conditions of the present technologies usage. This model allows to predict construction efficiency for different stored-number buildings.

  19. MHTGR [Modular High-Temperature Gas-Cooled Reactor] technology development plan

    International Nuclear Information System (INIS)

    Homan, F.J.; Neylan, A.J.

    1988-01-01

    This paper presents the approach used to define the technology program needed to support design and licensing of a Modular High-Temperature Gas-Cooled Reactor (MHTGR). The MHTGR design depends heavily on data and information developed during the past 25 years to support large HTGR (LHTGR) designs. The technology program focuses on MHTGR-specific operating and accident conditions, and on validation of models and assumptions developed using LHTGR data. The technology program is briefly outlined, and a schedule is presented for completion of technology work which is consistent with completion of a Final Safety Summary Analysis Report (FSSAR) by 1992

  20. A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets

    Energy Technology Data Exchange (ETDEWEB)

    Weller, G.H.

    2001-07-15

    Utility load management programs--including direct load control and interruptible load programs--were employed by utilities in the past as system reliability resources. With electricity industry restructuring, the context for these programs has changed; the market that was once controlled by vertically integrated utilities has become competitive, raising the question: can existing load management programs be modified so that they can effectively participate in competitive energy markets? In the short run, modified and/or improved operation of load management programs may be the most effective form of demand-side response available to the electricity system today. However, in light of recent technological advances in metering, communication, and load control, utility load management programs must be carefully reviewed in order to determine appropriate investments to support this transition. This report investigates the feasibility of and options for modifying an existing utility load management system so that it might provide reliability services (i.e. ancillary services) in the competitive markets that have resulted from electricity industry restructuring. The report is a case study of Southern California Edison's (SCE) load management programs. SCE was chosen because it operates one of the largest load management programs in the country and it operates them within a competitive wholesale electricity market. The report describes a wide range of existing and soon-to-be-available communication, control, and metering technologies that could be used to facilitate the evolution of SCE's load management programs and systems to provision of reliability services. The fundamental finding of this report is that, with modifications, SCE's load management infrastructure could be transitioned to provide critical ancillary services in competitive electricity markets, employing currently or soon-to-be available load control technologies.

  1. Information technology implementing globalization on strategies for quality care provided to children submitted to cardiac surgery: International Quality Improvement Collaborative Program - IQIC

    Science.gov (United States)

    Sciarra, Adilia Maria Pires; Croti, Ulisses Alexandre; Batigalia, Fernando

    2014-01-01

    Introduction Congenital heart diseases are the world's most common major birth defect, affecting one in every 120 children. Ninety percent of these children are born in areas where appropriate medical care is inadequate or unavailable. Objective To share knowledge and experience between an international center of excellence in pediatric cardiac surgery and a related program in Brazil. Methods The strategy used by the program was based on long-term technological and educational support models used in that center, contributing to the creation and implementation of new programs. The Telemedicine platform was used for real-time monthly broadcast of themes. A chat software was used for interaction between participating members and the group from the center of excellence. Results Professionals specialized in care provided to the mentioned population had the opportunity to share to the knowledge conveyed. Conclusion It was possible to observe that the technological resources that implement the globalization of human knowledge were effective in the dissemination and improvement of the team regarding the care provided to children with congenital heart diseases. PMID:24896168

  2. Information technology implementing globalization on strategies for quality care provided to children submitted to cardiac surgery: International Quality Improvement Collaborative Program--IQIC.

    Science.gov (United States)

    Sciarra, Adilia Maria Pires; Croti, Ulisses Alexandre; Batigalia, Fernando

    2014-01-01

    Congenital heart diseases are the world's most common major birth defect, affecting one in every 120 children. Ninety percent of these children are born in areas where appropriate medical care is inadequate or unavailable. To share knowledge and experience between an international center of excellence in pediatric cardiac surgery and a related program in Brazil. The strategy used by the program was based on long-term technological and educational support models used in that center, contributing to the creation and implementation of new programs. The Telemedicine platform was used for real-time monthly broadcast of themes. A chat software was used for interaction between participating members and the group from the center of excellence. Professionals specialized in care provided to the mentioned population had the opportunity to share to the knowledge conveyed. It was possible to observe that the technological resources that implement the globalization of human knowledge were effective in the dissemination and improvement of the team regarding the care provided to children with congenital heart diseases.

  3. Development of Thin Film Amorphous Silicon Tandem Junction Based Photocathodes Providing High Open-Circuit Voltages for Hydrogen Production

    Directory of Open Access Journals (Sweden)

    F. Urbain

    2014-01-01

    Full Text Available Hydrogenated amorphous silicon thin film tandem solar cells (a-Si:H/a-Si:H have been developed with focus on high open-circuit voltages for the direct application as photocathodes in photoelectrochemical water splitting devices. By temperature variation during deposition of the intrinsic a-Si:H absorber layers the band gap energy of a-Si:H absorber layers, correlating with the hydrogen content of the material, can be adjusted and combined in a way that a-Si:H/a-Si:H tandem solar cells provide open-circuit voltages up to 1.87 V. The applicability of the tandem solar cells as photocathodes was investigated in a photoelectrochemical cell (PEC measurement set-up. With platinum as a catalyst, the a-Si:H/a-Si:H based photocathodes exhibit a high photocurrent onset potential of 1.76 V versus the reversible hydrogen electrode (RHE and a photocurrent of 5.3 mA/cm2 at 0 V versus RHE (under halogen lamp illumination. Our results provide evidence that a direct application of thin film silicon based photocathodes fulfills the main thermodynamic requirements to generate hydrogen. Furthermore, the presented approach may provide an efficient and low-cost route to solar hydrogen production.

  4. Using Videoconferencing Technology to Provide Breastfeeding Support to Low-Income Women: Connecting Hospital-Based Lactation Consultants with Clients Receiving Care at a Community Health Center.

    Science.gov (United States)

    Friesen, Carol A; Hormuth, Laura J; Petersen, Devan; Babbitt, Tina

    2015-11-01

    The Tele-Lactation Pilot Project (TLPP), 1 of 13 community-based breastfeeding projects implemented in Indiana in 2013 using Centers for Disease Control and Prevention grant funds, explored the feasibility of using videoconferencing technology to provide breastfeeding education and support to low-income women by a centrally located International Board Certified Lactation Consultant (IBCLC). The IBCLC was housed at the Breastfeeding Center at the hospital where the women would deliver; the women receiving the education and support were located at an inner-city community health center (CHC) where they received their primary care. The videoconferencing sessions were juxtaposed with the women's regularly scheduled prenatal and postnatal visits at the CHC. After delivery, the lactation consultant visited the mother and infant in person at the hospital to offer additional support. Overall, 35 mothers were served by the TLPP during the 9-month project period. A total of 134 visits (30-45 minutes each) were conducted (3.8 sessions per woman). At the conclusion of the project, interviews with key participants indicated that the tele-lactation videoconferencing sessions were easy to implement, allowed the IBCLC to reach a wider client base, and allowed the women to receive expert support that they might not have otherwise received. Comments indicated that, in addition to providing education and increasing the women's confidence, the tele-lactation sessions appeared to have decreased the mothers' anxiety about the birthing process and the hospital experience. The TLPP demonstrated that incorporating videoconferencing technology into routine care can help foster collaboration among health care providers and provide mothers with continuous, easily accessible breastfeeding education and support. © The Author(s) 2015.

  5. STRATEGIES AND TECHNOLOGY FOR MANAGING HIGH-CARBON ASH

    Energy Technology Data Exchange (ETDEWEB)

    Robert Hurt; Eric Suuberg; John Veranth; Xu Chen; Indrek Kulaots

    2004-02-13

    The overall objective of the present project was to identify and assess strategies and solutions for the management of industry problems related to carbon in ash. Specific issues addressed included: (1) the effect of parent fuel selection on ash properties and adsorptivity, including a first ever examination of the air entrainment behavior of ashes from alternative (non-coal) fuels; (2) the effect of various low-NOx firing modes on ash properties and adsorptivity based on pilot-plant studies; and (3) the kinetics and mechanism of ash ozonation. This laboratory data has provided scientific and engineering support and underpinning for parallel process development activities. The development work on the ash ozonation process has now transitioned into a scale-up and commercialization project involving a multi-industry team and scheduled to begin in 2004. This report describes and documents the laboratory and pilot-scale work in the above three areas done at Brown University and the University of Utah during this three-year project.

  6. Development of CANDU high-burnup fuel fabrication technology

    International Nuclear Information System (INIS)

    Sim, Ki Seob; Suk, H. C.; Kwon, H. I.; Ji, C. G.; Cho, M. S.; Chang, H. I.

    1997-07-01

    This study is focused on the achievement of the fabrication process improvement of CANFLEX-NU and for this purpose, following two areas of basic research were executed this year. 1) development of amorphous alloy for use in brazing of nuclear materials. 2) development of ECT techniques for the end-cap weld inspection. Also, preliminary feasibility analyses on the characteristics and handling techniques of CANFLEX-RU fuel were executed this year. - Selection of optimum conversion process of RU power -Characterization of the composition of RU power - Radiological characterization of RU power and sintered pellets - Compaction and sintering characteristics of RU power - Required special process for the production of CANFLEX-RU fuel - Development of technical specification for RU powder and pellets. In addition, technical support activities were performed for in-pile and out-pile fuel performance tests such as precision measurement of out-pile test fuel dimensions, establishment of quality control technique on fuel bundle by providing bundle kits to AECL for use in-pile irradiation tests in the NRU research reactor. (author). 57 refs., 16 tabs.,40 figs

  7. FY 1997 Blue Book: High Performance Computing and Communications: Advancing the Frontiers of Information Technology

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The Federal High Performance Computing and Communications HPCC Program will celebrate its fifth anniversary in October 1996 with an impressive array of...

  8. Long-term high-level waste technology. Composite quarterly technical report, October-December 1979

    International Nuclear Information System (INIS)

    Cornman, W.R.

    1980-06-01

    This document summarizes work for the immobilization of high-level radioactive wastes from the chemical reprocessing of nuclear reactor fuels. The progress is reported in two main areas: site technology, and alternative waste form development

  9. Santa Clara Computer And High Technology Law Journal; Vol. 11, No. 1

    Science.gov (United States)

    1995-03-01

    SINCE SURFACE TRANSPORTATION MOVES PEOPLE & GOODS ALONG PUBLIC ROADS & TRANSIT SYSTEMS, IT MAY SEEM ODD TO BE CONCERNED ABOUT PRIVACY IN SUCH A HIGHLY PUBLIC CONTEXT. AND YET, RESPECTING PRIVACY WILL BE IMPORTANT, AS ADVANCED TECHNOLOGIES IMPROVE HIG...

  10. Study of application technology of ultra-high speed computer to the elucidation of complex phenomena

    International Nuclear Information System (INIS)

    Sekiguchi, Tomotsugu

    1996-01-01

    The basic design of numerical information library in the decentralized computer network was explained at the first step of constructing the application technology of ultra-high speed computer to the elucidation of complex phenomena. Establishment of the system makes possible to construct the efficient application environment of ultra-high speed computer system to be scalable with the different computing systems. We named the system Ninf (Network Information Library for High Performance Computing). The summary of application technology of library was described as follows: the application technology of library under the distributed environment, numeric constants, retrieval of value, library of special functions, computing library, Ninf library interface, Ninf remote library and registration. By the system, user is able to use the program concentrating the analyzing technology of numerical value with high precision, reliability and speed. (S.Y.)

  11. Evaluation and Selection of Technology Concepts for a Hypersonic High Speed Standoff Missile

    National Research Council Canada - National Science Library

    Roth, Bryce

    1999-01-01

    This paper describes the application of a method for technology concept selection to the design of a hypersonic high-speed standoff missile capable of achieving pin-point strike of long-range targets...

  12. High-Volume Airborne Fluids Handling Technologies to Fight Wildfires

    Science.gov (United States)

    Dickerson, Mark; Cox, Timothy; Hale, Cliff; Hatton, Rick

    2010-01-01

    NASA recently partnered with the U.S. Forest Service (USFS) on a project to examine mission suitability and recommend policies and procedures for the use of very large aerial firefighting aircraft such as the Boeing 747 and DC-10 aerial retardant delivery aircraft. The aircraft under study included a 10Tanker DC-10 and an Evergreen B-747. NASA's Dryden Flight Research Center and Ames Research Center worked with the USFS to help determine the safe flight envelope for these Very Large Air Tanker (VLAT) aircraft for the USFS and the Department of the Interior (DOI). This new generation of supertankers includes aircraft like these that have as much as four times the delivery capacity of the previous generation of aerial firefighting aircraft. Dryden performed operational test and evaluation assessments and reported findings and recommendations on these aircraft in cooperation with Ames. The team developed, implemented, and directed an evaluation test plan for use in flight test and in simulation. Ames provided support using pilot-in-the-loop simulations and coordinated simulator models, flight profiles, and data analysis with Dryden. The test plan was designed to evaluate the suitability of VLAT aircraft as a function of mission environment. Based on this analysis, NASA generated interim flight envelope limitations to enhance safety and operational utility in the fire-retardant delivery mission. These recommended flight limitations were adopted by the USFS. The 10Tanker DC-10 has been in use for several years with the California Department of Forestry and Fire Protection(Cal-Fire), but until NASA took on the challenge of reviewing VLAT capabilities and limitations, the USFS was hesitant to add them to the federal wildfire arsenal. The DC-10 delivery system is based on an externally mounted set of tanks and a bomb-bay style set of clamshell doors that are opened in precisely calibrated ways to deliver the amounts and concentrations of retardant called for by the

  13. Performance of digital integrated circuit technologies at very high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Prince, J.L.; Draper, B.L.; Rapp, E.A.; Kromberg, J.N.; Fitch, L.T.

    1980-01-01

    Results of investigations of the performance and reliability of digital bipolar and CMOS integrated circuits over the 25 to 340/sup 0/C range are reported. Included in these results are both parametric variation information and analysis of the functional failure mechanisms. Although most of the work was done using commercially available circuits (TTL and CMOS) and test chips from commercially compatible processes, some results of experimental simulations of dielectrically isolated CMOS are also discussed. It was found that commercial Schottky clamped TTL, and dielectrically isolated, low power Schottky-clamped TTL, functioned to junction temperatures in excess of 325/sup 0/C. Standard gold doped TTL functioned only to 250/sup 0/C, while commercial, isolated I/sup 2/L functioned to the range 250/sup 0/C to 275/sup 0/C. Commercial junction isolated CMOS, buffered and unbuffered, functioned to the range 280/sup 0/C to 310/sup 0/C/sup +/, depending on the manufacturer. Experimental simulations of simple dielectrically isolated CMOS integrated circuits, fabricated with heavier doping levels than normal, functioned to temperatures in excess of 340/sup 0/C. High temperature life testing of experimental, silicone-encapsulated simple TTL and CMOS integrated circuits have shown no obvious life limiting problems to date. No barrier to reliable functionality of TTL bipolar or CMOS integrated ciruits at temperatures in excess of 300/sup 0/C has been found.

  14. High throughput miniature drug-screening platform using bioprinting technology

    International Nuclear Information System (INIS)

    Rodríguez-Dévora, Jorge I; Reyna, Daniel; Xu Tao; Zhang Bimeng; Shi Zhidong

    2012-01-01

    In the pharmaceutical industry, new drugs are tested to find appropriate compounds for therapeutic purposes for contemporary diseases. Unfortunately, novel compounds emerge at expensive prices and current target evaluation processes have limited throughput, thus leading to an increase of cost and time for drug development. This work shows the development of the novel inkjet-based deposition method for assembling a miniature drug-screening platform, which can realistically and inexpensively evaluate biochemical reactions in a picoliter-scale volume at a high speed rate. As proof of concept, applying a modified Hewlett Packard model 5360 compact disc printer, green fluorescent protein expressing Escherichia coli cells along with alginate gel solution have been arrayed on a coverslip chip under a repeatable volume of 180% ± 26% picoliters per droplet; subsequently, different antibiotic droplets were patterned on the spots of cells to evaluate the inhibition of bacteria for antibiotic screening. The proposed platform was compared to the current screening process, validating its effectiveness. The viability and basic function of the printed cells were evaluated, resulting in cell viability above 98% and insignificant or no DNA damage to human kidney cells transfected. Based on the reduction of investment and compound volume used by this platform, this technique has the potential to improve the actual drug discovery process at its target evaluation stage. (paper)

  15. Expanding the classroom with educational technology: A case study of a Cuban polytechnic high school

    Directory of Open Access Journals (Sweden)

    Anne Leftwich

    2014-12-01

    Full Text Available Polytechnic instruction has a common place in the Cuban education system (Gasperini, 2000. In polytechnic institutions, teachers leverage technological tools to prepare students for labor market competences. This case study examined a polytechnic institution in Cuba to consider how teachers defined educational technology. Based on teacher questionnaire responses, site-based teacher interviews, and field observations, technology was primarily viewed as a method for student preparation. In other words, teachers used technology to prepare students for their future careers and the technology they will need to be successful in that career. The study found that teachers highly valued their technical pedagogical training, believed that the growing spaces were an integral part of their technology based instruction, and claimed that the limited resources was their greatest barrier to integrating ICT in the classroom.

  16. The perceptions of teachers and principals toward providing additional compensation to teachers in high-need subject areas

    Science.gov (United States)

    Longing, Jeffrey Lucian

    The purpose of this study was to determine possible differences in the perceptions of teachers teaching in high-need areas (i.e., math, science, special education, etc.) and teachers not teaching in high-need areas, (i.e., business education, physical education, etc.) as defined by the states of Arkansas and Louisiana, regarding higher compensation for high-need teachers. In addition, possible perception differences among principals and teachers were determined. The independent variables consisted of gender, position held, years of certified experience, and certification areas. The dependent variable was the perceptions of the participants on providing higher compensation for high-need teachers in order to attract and retain them. The data for all variables were collected using the Teacher Compensation Survey. The sample for this study was limited to teachers, grades 9 through 12, and principals of public high schools in south Arkansas and north Louisiana. Forty-four school districts in south Arkansas (Arkansas Department of Education, 2008a) and north Louisiana (Louisiana Department of Education, 2008a) met the criteria for this study. Twenty-two superintendents gave permission for their districts to participate in the research. A sample of 849 teachers and 38 principals were identified in these districts. Surveys were returned from 350 teachers, creating a 41% response rate. When the 31 principals that returned surveys were added to the total population, the response rate increased to 43% with 381 of the 887 surveyed responding. However, 42 of the teachers and two of the principals skipped some of the questions on the survey and were not included in the study. The researcher used a One-Way ANOVA and independent t-tests to determine the presence of statistical differences at the .05 level. The data showed that most math and science teachers agreed that high-need teachers should be compensated at a higher rate than teachers not teaching in high-need areas. The data

  17. High-efficient and high-content cytotoxic recording via dynamic and continuous cell-based impedance biosensor technology.

    Science.gov (United States)

    Hu, Ning; Fang, Jiaru; Zou, Ling; Wan, Hao; Pan, Yuxiang; Su, Kaiqi; Zhang, Xi; Wang, Ping

    2016-10-01

    Cell-based bioassays were effective method to assess the compound toxicity by cell viability, and the traditional label-based methods missed much information of cell growth due to endpoint detection, while the higher throughputs were demanded to obtain dynamic information. Cell-based biosensor methods can dynamically and continuously monitor with cell viability, however, the dynamic information was often ignored or seldom utilized in the toxin and drug assessment. Here, we reported a high-efficient and high-content cytotoxic recording method via dynamic and continuous cell-based impedance biosensor technology. The dynamic cell viability, inhibition ratio and growth rate were derived from the dynamic response curves from the cell-based impedance biosensor. The results showed that the biosensors has the dose-dependent manners to diarrhetic shellfish toxin, okadiac acid based on the analysis of the dynamic cell viability and cell growth status. Moreover, the throughputs of dynamic cytotoxicity were compared between cell-based biosensor methods and label-based endpoint methods. This cell-based impedance biosensor can provide a flexible, cost and label-efficient platform of cell viability assessment in the shellfish toxin screening fields.

  18. Abstinence and teenagers: prevention counseling practices of health care providers serving high-risk patients in the United States.

    Science.gov (United States)

    Harper, Cynthia C; Henderson, Jillian T; Schalet, Amy; Becker, Davida; Stratton, Laura; Raine, Tina R

    2010-06-01

    Abstinence-only education has had little demonstrable impact on teenagers' sexual behaviors, despite significant policy and funding efforts. Given the struggle over resources to improve teenagers' reproductive health outcomes, the views of clinicians serving teenagers at high risk for unintended pregnancy and STDs merit particular attention. In 2005, a qualitative study with 31 clinicians serving low-income, at-risk patients was conducted. A semistructured interview guide was used to ask clinicians about adolescent pregnancy, HIV and STD prevention counseling, and when they include abstinence. Thematic content analysis was used to examine the content of the counseling and the techniques used in different situations. Providers reported offering comprehensive counseling, presenting abstinence as a choice for teenagers, along with information about contraceptives and condoms. Several providers mentioned that with young, sexually inexperienced teenagers, they discuss delaying sexual activity and suggest other ways to be affectionate, while giving information on condoms. Providers explained how they assess whether teenagers feel ready to be sexually active and try to impart skills for healthy relationships. Some described abstinence as giving teenagers a way to opt out of unwanted sexual activity. Many support abstinence if that is the patient's desire, but routinely dispense condoms and contraceptives. Overall, providers did not give abstinence counseling as a rigid categorical concept in their preventive practices, but as a health tool to give agency to teenagers within a harm reduction framework. Their approach may be informative for adolescent policies and programs in the future.

  19. The technology of uranium extraction from the brine with high chlorine-ion content

    International Nuclear Information System (INIS)

    Khakimov, N.; Nazarov, Kh.M.; Mirsaidov, I.U.; Negmatov, Sh.I.; Barotov, B.B.

    2010-01-01

    Present article is devoted to technology of uranium extraction from the brine with high chlorine-ion content. The research results on uranium extraction from the brine of Sasik-Kul Lake by means of sorption method were considered. The chemical composition of salt was determined. The process of uranium sorption was described and analyzed. The technology of uranium extraction from the brine with high chlorine-ion content was proposed.

  20. Varying Interpretations of Technology as a Problem in Markets for Customised High-Tech Products

    DEFF Research Database (Denmark)

    Vendelø, Morten Thanning; Constantiou, Ioanna

    2012-01-01

    as an input to the firm's production function that generates a specific return on investment when used appropriately. As such, existing research does not account for the parties' varying interpretations of complex technology. If these interpretations are not revealed and resolved they may decrease customer...... satisfaction and create problems in the efficiency of technology use within the firm. This study investigates the potential of the inquiring dialogue approach for improving information sharing about technology interpretations held by the different parties. An empirical case study of a customised high......Firms involved in contracting and implementation of customised high-tech products face a number of challenges in their relationships with customers because of the underlying variability of complex technologies. Existing research proposes the use of rational decision models and represents technology...