WorldWideScience

Sample records for technology plasma issues

  1. Special issue: Plasma Conversion

    NARCIS (Netherlands)

    Nozaki, T.; Bogaerts, A.; Tu, X.; van de Sanden, M. C. M.

    2017-01-01

    With growing concern of energy and environmental issues, the combination of plasma and heterogeneous catalysts receives special attention in greenhouse gas conversion, nitrogen fixation and hydrocarbon chemistry. Plasma gas conversion driven by renewable electricity is particularly important for the

  2. Special issue on transient plasmas

    Science.gov (United States)

    Bailey, James; Hoarty, David; Mancini, Roberto; Yoneda, Hitoki

    2015-11-01

    This special issue of Journal of Physics B: Atomic, Molecular and Optical Physics is dedicated to the "spectroscopy of transient plasmas" covering plasma conditions produced by a range of pulsed laboratory sources including short and long pulse lasers, pulsed power devices, and free electron lasers (FELs). The full range of plasma spectroscopy up to high energy bremsstrahlung radiation, including line broadening analysis for application to data recorded with the ChemCam instrument on the Mars Science Laboratory rover Curiosity, is covered. This issue is timely as advances in optical lasers and x-ray FELs (XFEL) are enabling transient plasma to be probed at higher energies and shorter durations than ever before. New XFEL facilities being commissioned in Europe and Asia are adding to those operating in the US and Japan and the ELI high power laser project in Europe, due to open this year, will provide short pulse lasers of unprecedented power. This special issue represents a snapshot of the theoretical and experimental research in dense plasmas, electron kinetics, laser-induced breakdown spectroscopy of low temperature plasmas, inertial confinement fusion and non-equilibrium atomic physics using spectroscopy to diagnose plasmas produced by optical lasers, XFELs and pulsed-power machines.

  3. Elements of plasma technology

    CERN Document Server

    Wong, Chiow San

    2016-01-01

    This book presents some fundamental aspects of plasma technology that are important for beginners interested to start research in the area of plasma technology . These include the properties of plasma, methods of plasma generation and basic plasma diagnostic techniques. It also discusses several low cost plasma devices, including pulsed plasma sources such as plasma focus, pulsed capillary discharge, vacuum spark and exploding wire; as well as low temperature plasmas such as glow discharge and dielectric barrier discharge which the authors believe may have potential applications in industry. The treatments are experimental rather than theoretical, although some theoretical background is provided where appropriate. The principles of operation of these devices are also reviewed and discussed.

  4. Technology and technology transfer: some basic issues

    OpenAIRE

    Shamsavari, Ali; Adikibi, Owen; Taha, Yasser

    2002-01-01

    This paper addresses various issues relating to technology and transfer of technology such as technology and society, technology and science, channels and models of technology transfer, the role of multinational companies in transfer of technology, etc. The ultimate objective is to pose the question of relevance of some existing models and ideas like technological independence in an increasingly globalised world economy.

  5. Wind technology issues

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Antoni; Prats, Pep [Ecotecnia S.C.C.L., Barcelona (Spain)

    1999-01-01

    The paper focuses on the main trends of the technology behind the present wind energy applications. The technology characteristics and main challenges are analysed. The important links between political decisions and the development to date of wind turbines signal a direction for forecasting future tendencies and the possible technical characteristics of future turbines. (Author)

  6. Plasma applications for biochip technology

    Energy Technology Data Exchange (ETDEWEB)

    Ichiki, T.; Sugiyama, Y.; Taura, R.; Koidesawa, T.; Horiike, Y

    2003-07-01

    Biochip technology has emerged from the fusion of biotechnology and micro/nanofabrication technology. Biochips enable us to realize revolutionary new bioanalysis systems that can directly manipulate and analyze the micro/nano-scale world of biomolecules, organelles and cells. This paper describes a few bioanalysis systems and the microfabrication technology being developed as examples of the application of plasma technologies for upcoming nanobiotechnology. Deep dry etching of glass plates has been developed and applied to fabricate microfluidic devices that can manipulate biological cells. Moreover, ultra-high-rate localized etching of silicon wafers has been developed using a microplasma jet apparatus for rapid micromachining.

  7. Physics issues in long pulse plasma confinement

    Energy Technology Data Exchange (ETDEWEB)

    Itoh, Kimitaka; Toda, Shinichiro; Sanuki, Heiji [National Institute for Fusion Science, Toki, Gifu (Japan); Itoh, Sanae-I; Yagi, Masatoshi [Research Institute for Applied Mechanics, Kyushu University, Kasuga, Fukuoka (Japan); Fukuyama, Atsushi [Department of Nuclear Engineering, Kyoto University, Kyoto (Japan)

    2000-07-01

    Physics in the steady-state or long time discharge are illustrated from the view point of generic toroidal plasmas. Issues include physics process with very long time scale, dynamical phenomena of various time scales, transition nature under very slow temporal variations of parameters, statistical occurrence of transition and life time and identification of minimum circulating power. Nonlinear dependencies of transport properties of density, temperature, current, electric field and poloidal magnetic field cause self-organized dynamics. A picture of stationary oscillatory states is presented from a unified picture of nonlinear limit cycle dynamics. It is emphasized that the long time asymptotics are determined by the structure formation mechanisms. The sustainment needs a circulating power, and the circulating power in steady state plasma is also discussed. (author)

  8. [Plasma technology for biomedical material applications].

    Science.gov (United States)

    Liu, Z; Li, X

    2000-03-01

    In this paper is introduced the plasma technology for the applications of several species biomaterial such as ophthalmological material, drug delivery system, tissue culture material, blood anticoagulant material as well as plasma surface clearing and plasma sterilization, and so on.

  9. Low temperature plasma technology methods and applications

    CERN Document Server

    Chu, Paul K

    2013-01-01

    Written by a team of pioneering scientists from around the world, Low Temperature Plasma Technology: Methods and Applications brings together recent technological advances and research in the rapidly growing field of low temperature plasmas. The book provides a comprehensive overview of related phenomena such as plasma bullets, plasma penetration into biofilms, discharge-mode transition of atmospheric pressure plasmas, and self-organization of microdischarges. It describes relevant technology and diagnostics, including nanosecond pulsed discharge, cavity ringdown spectroscopy, and laser-induce

  10. Population Issues. Resources in Technology.

    Science.gov (United States)

    Technology Teacher, 1991

    1991-01-01

    Presents information about the problems caused by increasing population. Discusses the environmental impact and the ways that technology can be used to solve problems of overpopulation. Includes possible student outcomes and a student quiz. (JOW)

  11. Population Issues. Resources in Technology.

    Science.gov (United States)

    Technology Teacher, 1991

    1991-01-01

    Presents information about the problems caused by increasing population. Discusses the environmental impact and the ways that technology can be used to solve problems of overpopulation. Includes possible student outcomes and a student quiz. (JOW)

  12. Technology Transfer Issues and a New Technology Transfer Model

    Science.gov (United States)

    Choi, Hee Jun

    2009-01-01

    The following are major issues that should be considered for efficient and effective technology transfer: conceptions of technology, technological activity and transfer, communication channels, factors affecting transfer, and models of transfer. In particular, a well-developed model of technology transfer could be used as a framework for…

  13. Science, Technology, & Human Values. Issue No. 26.

    Science.gov (United States)

    Shelanski, Vivien B., Ed.; La Follette, Marcel C., Ed.

    This issue contains articles on the recombinant DNA controversy, the ethical principles of scientific institutions, and the effect of disaster novels on public opinion and technology assessment, as well as a guide to funding for science, technology and values projects, and a bibliography on professional ethics. In addition, 14 pages of news items…

  14. Addressing Issues Related to Technology and Engineering

    Science.gov (United States)

    Technology Teacher, 2008

    2008-01-01

    This article presents an interview with Michael Hacker and David Burghardt, codirectors of Hoftra University's Center for Technological Literacy. Hacker and Burghardt address issues related to technology and engineering. They argue that teachers need to be aware of the problems kids are facing, and how to present these problems in an engaging…

  15. RFID Technologies : emerging issues and challenges

    NARCIS (Netherlands)

    Lieshout, M.J. van; Kool, L.

    2007-01-01

    In this paper we will present the results of a technology and policy assessment we have performed on emerging issues and policy challenges of RFID technologies. RFID is a basic component of the future internet of things. A balanced view on opportunities and threats, on drivers and barriers is needed

  16. Teaching Science and Technology Issues: Curriculum Perspectives.

    Science.gov (United States)

    Kumar, David

    1997-01-01

    Discusses problems in teaching science and technology from a societal perspective if not handled with prudence. The misapplication of scientific and technological knowledge in Nazi Germany in World War II is explored in particular. Suggests that an issue-oriented education is needed to help students gain an overall understanding of scientific…

  17. Health care technology as a policy issue

    NARCIS (Netherlands)

    Banta, H.D.

    1994-01-01

    Health care technology has become an increasingly visible issue in many countries, primarily because of the rising costs of health care. In addition, many questions concerning quality of care are being raised. Health care technology assessment has been seen as an aid in addressing questions

  18. RFID Technologies : emerging issues and challenges

    NARCIS (Netherlands)

    Lieshout, M.J. van; Kool, L.

    2007-01-01

    In this paper we will present the results of a technology and policy assessment we have performed on emerging issues and policy challenges of RFID technologies. RFID is a basic component of the future internet of things. A balanced view on opportunities and threats, on drivers and barriers is needed

  19. Environmental issues affecting clean coal technology deployment

    Energy Technology Data Exchange (ETDEWEB)

    Miller, M.J. [Electric Power Research Inst., Palo Alto, CA (United States)

    1997-12-31

    The author outlines what he considers to be the key environmental issues affecting Clean Coal Technology (CCT) deployment both in the US and internationally. Since the international issues are difficult to characterize given different environmental drivers in various countries and regions, the primary focus of his remarks is on US deployment. However, he makes some general remarks, particularly regarding the environmental issues in developing vs. developed countries and how these issues may affect CCT deployment. Further, how environment affects deployment depends on which particular type of clean coal technology one is addressing. It is not the author`s intention to mention many specific technologies other than to use them for the purposes of example. He generally categorizes CCTs into four groups since environment is likely to affect deployment for each category somewhat differently. These four categories are: Precombustion technologies such as coal cleaning; Combustion technologies such as low NOx burners; Postcombustion technologies such as FGD systems and postcombustion NOx control; and New generation technologies such as gasification and fluidized bed combustion.

  20. The 2017 Plasma Roadmap: Low temperature plasma science and technology

    Science.gov (United States)

    Journal of Physics D: Applied Physics published the first Plasma Roadmap in 2012 consisting of the individual perspectives of 16 leading experts in the various sub-fields of low temperature plasma science and technology. The 2017 Plasma Roadmap is the first update of a planned series of periodic upd...

  1. Science and technology review, September 1998 issue

    Energy Technology Data Exchange (ETDEWEB)

    Smart, J

    1998-09-01

    This issue focuses on monitoring the Comprehensive Test Ban Treaty. A feature article on the history of the Laboratory is also included. Other articles highlight X-ray laser technology and the ground testing of microsatellites that emulates the free-floating environment of actual space flight

  2. Technology Issues in Indian Country Today.

    Science.gov (United States)

    Warner, Linda Sue

    1998-01-01

    Examines legal and ethical issues related to Internet use and use of other technologies in Native American communities. Discusses conflict between federal telecommunications policy and the principles of tribal sovereignty, cultural appropriation, intellectual property rights, gatekeeping to limit access to traditional knowledge, and effects of…

  3. Technology and the issues facing nursing assessment.

    Science.gov (United States)

    Ansell, Helen; Meyer, Alannah; Thompson, Shona

    This article describes an investigation into the use of technology and the issues nurses face undertaking nursing assessment. It reports qualitative, descriptive research involving interviews with ten ward nurses from three hospitals in New Zealand. Thematic analysis of the data revealed three key issues: the impact of technology, the influence of early warning systems and nurse autonomy. Results show how clinical decision making around nursing assessment is influenced by technology and the Early Warning Score. These clinical decisions may not always be informed by critical thinking in complex healthcare environments. The article concludes that nurse autonomy, while supported and endorsed in theory, is frequently in conflict with hospital risk-management policies and the use of prescriptive algorithms.

  4. [Low temperature plasma technology for biomass refinery].

    Science.gov (United States)

    Fu, Xiaoguo; Chen, Hongzhang

    2014-05-01

    Biorefinery that utilizes renewable biomass for production of fuels, chemicals and bio-materials has become more and more important in chemical industry. Recently, steam explosion technology, acid and alkali treatment are the main biorefinery treatment technologies. Meanwhile, low temperature plasma technology has attracted extensive attention in biomass refining process due to its unique chemical activity and high energy. We systemically summarize the research progress of low temperature plasma technology for pretreatment, sugar platflow, selective modification, liquefaction and gasification in biomass refinery. Moreover, the mechanism of low temperature plasma in biorefinery and its further development were also discussed.

  5. Plasma Physics Issues in Gas Discharge Laser Development

    Science.gov (United States)

    1991-12-01

    WL-TR-92-2087 PLASMA PHYSICS ISSUES IN GAS DISCHARGE LASER DEVELOPMENT AD-A257 735 ALAN GARSCADDEN MARK J. KUSNER J. GARY EDEN WL/POOC-3 WRIGHT...LASERS INFRARED MOLECULAR jAS LASERS UNCLASSIFIED UNCLASSIFIED UNCLASSIFIED UL Plasma Physics Issues in Gas Discharge Laser Development Alan Garscadden...the close coupling between body of work was not generally useful in laser development . vibrationally excited nitrogen and CO or CO2 . In fact. the First

  6. The 2017 Plasma Roadmap: Low temperature plasma science and technology

    Science.gov (United States)

    Adamovich, I.; Baalrud, S. D.; Bogaerts, A.; Bruggeman, P. J.; Cappelli, M.; Colombo, V.; Czarnetzki, U.; Ebert, U.; Eden, J. G.; Favia, P.; Graves, D. B.; Hamaguchi, S.; Hieftje, G.; Hori, M.; Kaganovich, I. D.; Kortshagen, U.; Kushner, M. J.; Mason, N. J.; Mazouffre, S.; Mededovic Thagard, S.; Metelmann, H.-R.; Mizuno, A.; Moreau, E.; Murphy, A. B.; Niemira, B. A.; Oehrlein, G. S.; Petrovic, Z. Lj; Pitchford, L. C.; Pu, Y.-K.; Rauf, S.; Sakai, O.; Samukawa, S.; Starikovskaia, S.; Tennyson, J.; Terashima, K.; Turner, M. M.; van de Sanden, M. C. M.; Vardelle, A.

    2017-08-01

    Journal of Physics D: Applied Physics published the first Plasma Roadmap in 2012 consisting of the individual perspectives of 16 leading experts in the various sub-fields of low temperature plasma science and technology. The 2017 Plasma Roadmap is the first update of a planned series of periodic updates of the Plasma Roadmap. The continuously growing interdisciplinary nature of the low temperature plasma field and its equally broad range of applications are making it increasingly difficult to identify major challenges that encompass all of the many sub-fields and applications. This intellectual diversity is ultimately a strength of the field. The current state of the art for the 19 sub-fields addressed in this roadmap demonstrates the enviable track record of the low temperature plasma field in the development of plasmas as an enabling technology for a vast range of technologies that underpin our modern society. At the same time, the many important scientific and technological challenges shared in this roadmap show that the path forward is not only scientifically rich but has the potential to make wide and far reaching contributions to many societal challenges.

  7. Telecare technologies and isolation: some ethical issues

    Directory of Open Access Journals (Sweden)

    Eccles A

    2015-05-01

    Full Text Available Andrew Eccles School of Social Work & Social Policy, University of Strathclyde, Glasgow, UK Abstract: Telecare technologies involve the remote monitoring of patients who have health, rehabilitation or social needs. These technologies, although deployed unevenly in developed countries, represent a shift in the ways in which care is practiced. Research on the consequences of this shift away from more traditional "hands-on" care has focused primarily on quantitative measurement (for example cost savings with less attention paid to how recipients themselves experience these new care practices. This paper discusses two aspects of telecare technologies which are under researched; the potential for loneliness which may arise as a result of the use of these technologies, and the ethical issues raised by this. The primary locus of the discussion is the UK, where a major public policy shift towards telecare is under way and where telecare research based on randomized control trials has been particularly well funded by the government. The discussion concludes that there is indeed the potential for loneliness, a condition increasingly recognized as a significant factor in reducing overall health and well-being, in the use of these technologies. The ethical implications of this are not being sufficiently considered, in part because the ethical frameworks in use do not adequately address the issue of loneliness itself, given their bio-medical, rather than relational focus. The paper suggests two ways of redressing this. First, the addition of approaches to ethics other than bio-medical – particularly those with a relational and contextual focus – or greater exploration of how the two approaches might interact. Second, it suggests that a paradigm shift towards solutions other than technology-based care is overdue. This shift would not underplay the importance of technological contributions to care needs. It would, however, be an argument to suggest we

  8. Complex plasmas scientific challenges and technological opportunities

    CERN Document Server

    Lopez, Jose; Becker, Kurt; Thomsen, Hauke

    2014-01-01

    This book provides the reader with an introduction to the physics of complex plasmas, a discussion of the specific scientific and technical challenges they present, and an overview of their potential technological applications. Complex plasmas differ from conventional high-temperature plasmas in several ways: they may contain additional species, including nanometer- to micrometer-sized particles, negative ions, molecules and radicals, and they may exhibit strong correlations or quantum effects. This book introduces the classical and quantum mechanical approaches used to describe and simulate complex plasmas. It also covers some key experimental techniques used in the analysis of these plasmas, including calorimetric probe methods, IR absorption techniques and X-ray absorption spectroscopy. The final part of the book reviews the emerging applications of microcavity and microchannel plasmas, the synthesis and assembly of nanomaterials through plasma electrochemistry, the large-scale generation of ozone using mi...

  9. Advanced manufacturing technologies on color plasma displays

    Science.gov (United States)

    Betsui, Keiichi

    2000-06-01

    The mass production of the color plasma display started from 1996. However, since the price of the panel is still expensive, PDPs are not in widespread use at home. It is necessary to develop the new and low-cost manufacturing technologies to reduce the price of the panel. This paper describes some of the features of new fabrication technologies of PDPs.

  10. Overview of plasma technology used in medicine

    Science.gov (United States)

    Ryan, Thomas P.; Stalder, Kenneth R.; Woloszko, Jean

    2013-02-01

    Plasma Medicine is a growing field that is having an impact in several important areas in therapeutic patient care, combining plasma physics, biology, and clinical medicine. Historically, plasmas in medicine were used in electrosurgery for cautery and non-contact hemostasis. Presently, non-thermal plasmas have attained widespread use in medicine due to their effectiveness and compatibility with biological systems. The paper will give a general overview of how low temperature, non-equilibrium, gas plasmas operate, both from physics and biology perspectives. Plasma is commonly described as the fourth state of matter and is typically comprised of charged species, active molecules and atoms, as well as a source of UV and photons. The most active areas of plasma technology applications are in wound treatment; tissue regeneration; inactivation of pathogens, including biofilms; treating skin diseases; and sterilization. There are several means of generating plasmas for use in medical applications, including plasma jets, dielectric barrier discharges, capacitively or inductively coupled discharges, or microplasmas. These systems overcome the former constraints of high vacuum, high power requirements and bulky systems, into systems that use room air and other gases and liquids at low temperature, low power, and hand-held operation at atmospheric pressure. Systems will be discussed using a variety of energy sources: pulsed DC, AC, microwave and radiofrequency, as well as the range of frequency, pulse duration, and gas combinations in an air environment. The ionic clouds and reactive species will be covered in terms of effects on biological systems. Lastly, several commercial products will be overviewed in light of the technology utilized, health care problems being solved, and clinical trial results.

  11. Cold plasma technology close-up

    Science.gov (United States)

    This month’s column discusses cold plasma, an emerging technology that has potential applications as an antimicrobial process for fresh and fresh-cut fruits and vegetables, low-moisture foods, and food contact surfaces. Brendan A. Niemira, the coauthor of this month’s column, is the research leader ...

  12. Ethical Issues in Technology Education in Taiwan

    Science.gov (United States)

    Lin, Kuen-Yi

    2007-01-01

    A significant trend in technology education has shown internationally widespread acceptance with the increasing needs of developing students' technological literacy on both the elementary and secondary level from manual training to basic competency. Therefore, more and more countries have developed their national technology standards in order to…

  13. Policy issues inherent in advanced technology development

    Energy Technology Data Exchange (ETDEWEB)

    Baumann, P.D.

    1994-12-31

    In the development of advanced technologies, there are several forces which are involved in the success of the development of those technologies. In the overall development of new technologies, a sufficient number of these forces must be present and working in order to have a successful opportunity at developing, introducing and integrating into the marketplace a new technology. This paper discusses some of these forces and how they enter into the equation for success in advanced technology research, development, demonstration, commercialization and deployment. This paper limits itself to programs which are generally governmental funded, which in essence represent most of the technology development efforts that provide defense, energy and environmental technological products. Along with the identification of these forces are some suggestions as to how changes may be brought about to better ensure success in a long term to attempt to minimize time and financial losses.

  14. Franchising Technology Education: Issues and Implications.

    Science.gov (United States)

    Daniel, Dan; Newcomer, Cynthia

    1993-01-01

    Describes educational technology franchises that sell services to students, either through schools or directly through retail centers, to educate them about and with technology. Topics addressed include the emphasis on personalized instruction; cooperative learning; curriculum; cost effectiveness; site-based management in public education; and…

  15. Trends and Research Issues in Educational Technology

    Science.gov (United States)

    Spector, J. Michael

    2013-01-01

    If one looks back at the last 50 years or so at educational technologies, one will notice several things. First, the pace of innovation has increased dramatically with many developments in the application of digital technologies to learning and instruction, following by a few years developments in the sciences and engineering disciplines that are…

  16. Telecare technologies and isolation: some ethical issues

    OpenAIRE

    Eccles A

    2015-01-01

    Andrew Eccles School of Social Work & Social Policy, University of Strathclyde, Glasgow, UK Abstract: Telecare technologies involve the remote monitoring of patients who have health, rehabilitation or social needs. These technologies, although deployed unevenly in developed countries, represent a shift in the ways in which care is practiced. Research on the consequences of this shift away from more traditional "hands-on" care has focused primarily on quantitative me...

  17. Information technology research and development critical trends and issues

    CERN Document Server

    1985-01-01

    Information Technology Research and Development: Critical Trends and Issues is a report of the Office of Technology Assessment of the United States Government on the research and development in the area of information technology. The report discusses information technology research and development - its goals, nature, issues, and strategies; environment and its changes; the roles of the participants; and the health of its field. The book then goes on to four selected case studies in information technology: advanced computer architecture; fiber optic communications; software engineering; and ar

  18. Trends, Issues, and Gaps in Technology for Elementary Social Studies.

    Science.gov (United States)

    Nickell, Pat; Field, Sherry L.; Roach, Pamela S.

    2001-01-01

    Addresses the status of technology in elementary social studies. Reviews research on technology and elementary social studies, explores various examples of practice, discusses how preservice social studies methods textbooks treat the issue of using technology, and identifies beliefs held by elementary social studies teachers. (CMK)

  19. Ethical issues in modern biological technologies.

    Science.gov (United States)

    Bhargava, Pushpa M

    2003-10-01

    Today's biology-based technologies have emerged from a historical imperative and as an inevitable consequence of developments in modern biology beginning in the last half-century. They can be classified into almost 30 different areas, ranging from the use of gene therapy for human beings, enzyme engineering, stem cells and cloning, to marine biotechnology, bioinformatics, nanotechnology and biological warfare among many others. Many of them have major sociopolitico-economic, moral, ethical and legal implications. They include genetic engineering, gene therapy, tissue culture, stem cell work, the new DNA technologies, commercialization of traditional plant-based drug formulations, assisted reproduction techniques, cloning technologies, organ transplantation, bioinformatics, and biological weapons. Examples of the ethical implications of several of these items will be considered. They will be assessed with special reference to ethical implications in respect of assisted reproduction techniques, of worldwide importance today, particularly for a country such as India.

  20. Module Technology: Current Practice and Issues (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, J.

    2010-10-05

    PV modules must provide mechanical support for the cells, protect the world from the voltages inside, protect the cells, diodes and interconnects from the weather outside, couple as much light as possible into the PV cells and minimize the temperature increase of the cells. The package must continue to serve these functions for at least 25 years as that is the typical module warranty period today. Furthermore the package must do all this for as low a cost as possible since the key to large scale PV growth is a reduction in cost while retaining excellent module reliability and durability. This paper will review current module construction practices for both crystalline silicon and thin film PV with emphasis on explaining why the present designs and materials have been selected. Possible long term issues with today's designs and materials will be discussed. Several proposed solutions to these issues will be presented, highlighting the research efforts that will be necessary in order to verify that they can cost effectively solve the identified issues.

  1. Man and His Technology: Problems and Issues.

    Science.gov (United States)

    Piel, E. J.; Truxal, John G.

    This book looks at a sampling of notable socio-technical problems within a rational context. It seeks to determine if problems exist with recent decisions in the application of technology; how threatening any problems may be; the source of problems; and examines alternatives available to the nation. The broad goal of this rational consideration is…

  2. Sanitary technology. Special issue; Sanitairtechniek. Themanummer

    Energy Technology Data Exchange (ETDEWEB)

    Lodder, H. [Deerns Raadgevende Ingenieurs, Rijswijk (Netherlands); De Veer, T. [PWN Waterleidingbedrijf Noord-Holland, Velserbroek (Netherlands); Korstanje, H.; De Gids, Ph. K. [LegioFreeWaterSystems, Wijk bij Duurstede (Netherlands); Lansbergen, A. [Itho, Schiedam (Netherlands); Scheffer, W.J.H. [UNETO-VNI, Zoetermeer (Netherlands); Van Wolferen, H. [TNO Milieu en Energie, Apeldoorn (Netherlands); Donker, H. [Kemper Nederland, Groenlo (Netherlands); Engelenburg, M. [ATECA, Den Haag (Netherlands); Wolters, J. [Tour en Andersson, Alphen aan den Rijn (Netherlands); Doldersum, R.H. [De Melker Sanitairtechniek, Veenendaal (Netherlands)

    2007-09-15

    In 11 articles attention is paid to several aspects of sanitary technology, in particular the prevention and control of legionella in heating systems and water supply installations. [Dutch] In 11 artikelen wordt aandacht besteed aan verschillende aspecten m.b.t. sanitaire techniek, in het bijzonder legionella preventie en beheer in verwarmingssystemen en leidingwaterinstallaties.

  3. Integration issues of a plasma contactor Power Electronics Unit

    Science.gov (United States)

    Pinero, Luis R.; York, Kenneth W.; Bowers, Glen E.

    1995-06-01

    A hollow cathode-based plasma contactor is baselined on International Space Station Alpha (ISSA) for spacecraft charge control. The plasma contactor system consists of a hollow cathode assembly (HCA), a power electronics unit (PEU), and an expellant management unit (EMU). The plasma contactor has recently been required to operate in a cyclic mode to conserve xenon expellant and extend system life. Originally, a DC cathode heater converter was baselined for a continuous operation mode because only a few ignitions of the hollow cathode were expected. However, for cyclic operation, a DC heater supply can potentially result in hollow cathode heater component failure due to the DC electrostatic field. This can prevent the heater from attaining the proper cathode tip temperature for reliable ignition of the hollow cathode. To mitigate this problem, an AC cathode heater supply was therefore designed, fabricated, and installed into a modified PEU. The PEU was tested using resistive loads and then integrated with an engineering model hollow cathode to demonstrate stable steady-state operation. Integration issues such as the effect of line and load impedance on the output of the AC cathode heater supply and the characterization of the temperature profile of the heater under AC excitation were investigated.

  4. Integration issues of a plasma contactor Power Electronics Unit

    Science.gov (United States)

    Pinero, Luis R.; York, Kenneth W.; Bowers, Glen E.

    1995-01-01

    A hollow cathode-based plasma contactor is baselined on International Space Station Alpha (ISSA) for spacecraft charge control. The plasma contactor system consists of a hollow cathode assembly (HCA), a power electronics unit (PEU), and an expellant management unit (EMU). The plasma contactor has recently been required to operate in a cyclic mode to conserve xenon expellant and extend system life. Originally, a DC cathode heater converter was baselined for a continuous operation mode because only a few ignitions of the hollow cathode were expected. However, for cyclic operation, a DC heater supply can potentially result in hollow cathode heater component failure due to the DC electrostatic field. This can prevent the heater from attaining the proper cathode tip temperature for reliable ignition of the hollow cathode. To mitigate this problem, an AC cathode heater supply was therefore designed, fabricated, and installed into a modified PEU. The PEU was tested using resistive loads and then integrated with an engineering model hollow cathode to demonstrate stable steady-state operation. Integration issues such as the effect of line and load impedance on the output of the AC cathode heater supply and the characterization of the temperature profile of the heater under AC excitation were investigated.

  5. Physics issues associated with low-beta plasma generators

    Science.gov (United States)

    Borovsky, Joseph E.

    1992-01-01

    Kinetic aspects of MHD generators are explored by examining the propagation of dense, low-beta streams of plasma. Three situations are considered: the basic principles of plasma-stream propagation, the propagation of plasma streams into vacuum, and the propagation of plasma streams into ambient plasmas. These three situations are analogous to plasma generators, plasma generators with vacuum loads, and plasma generators with plasma loads. Kinetic (microphysics) aspects include oscillations of the generator plasma, the effects of diocotron instabilities, the acceleration of particles, the starvation of current systems, and plasma-wave production.

  6. Science and technology review, October 1998 issue

    Energy Technology Data Exchange (ETDEWEB)

    Smart, J

    1998-10-01

    A mobile radar system for inspecting bridges. Laser pulses to strengthen metal. A new kind of key that uses lasers. An imaging system that reveals the insides of teeth. A novel method to measure temperature. Computer software that boosts semiconductor production. And a detector to aid optics manufacturing efficiency. These inventions by Lawrence Livermore National Laboratory researchers and their industrial partners were recently honored by R&D Magazine as seven of the top 100 technological achievements of the past year.

  7. Thermal food processing: new technologies and quality issues

    National Research Council Canada - National Science Library

    Sun, Da-Wen

    2012-01-01

    .... The editor of Thermal Food Processing: New Technologies and Quality Issues presents a comprehensive reference through authors that assist in meeting this challenge by explaining the latest developments and analyzing the latest trends...

  8. Plasma Technology R&D at SMU

    Science.gov (United States)

    Hershcovitch, Ady; Socha, Andrzej; Kovacevic, Radovan

    2008-11-01

    A program designed to develop enabling technologies for electron beam materials processing in air centered on plasma shielding was initiated at Southern Methodist University (SMU). Plasma shielding is designed to chemically and thermally shield a target object by engulfing an area subjected to beam treatment with inert plasma. The shield consists of a vortex-stabilized arc that is employed to shield beams and workpiece area of interaction from atmospheric or liquid environment. The vortex is composed of a sacrificial gas or liquid that swirls around and stabilizes the arc. A simpler, low-tech concept, which is a radiation and gas shielding chamber dubbed Shield Box, is also slated to be developed. The box is to be mounted on swivel wheels with suspension to facilitated smooth motion of a workpiece during welding or other processing. Sealing of the gap between the box solid walls and the workpiece is to be made out of flexible x-ray shielding material like bismuth cloth, lead vinyl, Demron fabric, etc.

  9. Managing the Organizational Culture: A Technological Issue

    Directory of Open Access Journals (Sweden)

    Takhir U. Bazarov

    2011-01-01

    Full Text Available Organizational culture presents an interest for research and practice of social psychology. This article is intended to discuss the problem of managing the organizational structure on two levels that contain most topical problems: general methodological level and technological level. Organizational culture is a system with its distinct features that consists of units and sub-systems with their specific features. An organizational-culture system comprises several levels: leader's personality level (as well as the personality level in general, level of executive team (as well as of a small group in general, level of organization in general (level of a large group.

  10. How technology transfer issues are managed

    Energy Technology Data Exchange (ETDEWEB)

    Sink, C.H. [Dept. of Energy, Washington, DC (United States); Easley, K.R. [Waste Policy Inst. (United States)

    1991-12-31

    In 1989, Secretary of Energy James Watkins made a commitment to accelerate DOE compliance with all applicable laws and standards aimed at protecting human health and the environment. At a minimum, this pledge requires the remediation of the 1989 inventory of chemical, radioactive, and mixed wastes at DOE production sites by 2019. The 1989 Complex inventory consisted of more than 3,700 sites, encompassing more than 26,000 acres contaminated with radioactive, hazardous, and mixed wastes. In addition, over 500 surplus sites are awaiting decontamination and decommissioning (D and D), and approximately 5,000 peripheral properties have contaminated soils (e.g., uranium tailings). Moreover, these problems exist at both inactive sites, where the primary focus is on environmental restoration, and at active sites, where the major emphasis is on improved waste management techniques. Although some of DOE`s problems are considered unique due to radioactivity, most forms of contamination resident in the Complex are not; rather, contaminants such as waste chemicals (e.g., inorganics), organics (e.g., fuels and solvents), halogenated organics (e.g., PCBs) and heavy metals commonly result in conventional industrial processes. Although certain other forms of contamination are more unique to DOE operations (e.g., radioactive materials, explosives, and pyrophorics), they are not exclusive to DOE. As DOE develops innovative solutions to these and related waste problems, it is imperative that technology systems and lessons learned be transferred from DOE sites and its R and D laboratories to private industry to maximize the nation`s return on environmental management technology investments.

  11. Several Legal Issues Relating to Service Technological Results

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    How "the rights and interests in the intellectual property rights of the scientists and technicians should be protected and the entity achieving the service-related technological results should remunerate, under law, those achieving the service-related technological results and those making outstanding contribution to the transfer of the technological results" are important issues encountered in China in its efforts to improve its innovation capacity and build up a new nation. The current legal system in...

  12. Strategic issues in information technology international implications for decision makers

    CERN Document Server

    Schütte, Hellmut

    1988-01-01

    Strategic Issues in Information Technology: International Implications for Decision Makers presents the significant development of information technology in the output of components, computers, and communication equipment and systems. This book discusses the integration of information technology into factories and offices to increase productivity.Organized into six parts encompassing 12 chapters, this book begins with an overview of the advancement towards an automated interpretation communication system to achieve real international communication. This text then examines the main determining

  13. Special Issue on Nanotechnology, Optoelectronics and Photonics Technologies

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    International Conference on Nanotechnology, Optoelec- tronics and Photonics Technologies (NOPT) is an annual International Conference sponsored by Photonics and Microelectronics Society and Components, Packaging & Manufacturing Society of IACSIT (International Associa- tion of Computer Science and Information Technology), and sponsored by JEST (International), Journal of Electronic Science and Technology. The annual conference aims to provide a forum for researchers and experts in the relevant fields to share ideas, present current states of researches, and discuss both theoretical and application issues.

  14. 3D Bioprinting Technology: Scientific Aspects and Ethical Issues.

    Science.gov (United States)

    Patuzzo, Sara; Goracci, Giada; Gasperini, Luca; Ciliberti, Rosagemma

    2017-06-28

    The scientific development of 3D bioprinting is rapidly advancing. This innovative technology involves many ethical and regulatory issues, including theoretical, source, transplantation and enhancement, animal welfare, economic, safety and information arguments. 3D bioprinting technology requires an adequate bioethical debate in order to develop regulations in the interest both of public health and the development of research. This paper aims to initiate and promote ethical debate. The authors examine scientific aspects of 3D bioprinting technology and explore related ethical issues, with special regard to the protection of individual rights and transparency of research. In common with all new biotechnologies, 3D bioprinting technology involves both opportunities and risks. Consequently, several scientific and ethical issues need to be addressed. A bioethical debate should be carefully increased through a multidisciplinary approach among experts and also among the public.

  15. Microwave plasma: its characteristics and applications in thin film technology

    Energy Technology Data Exchange (ETDEWEB)

    Musil, J.

    Microwave plasmas differ significantly from other plasmas, exhibit many interesting properties and so offer new possibilities for the plasma processing of thin films. Plasma properties strongly depend on the conditions and methods used to excite the gas. Due to the existence of a direct connection between the properties of plasma-prepared thin films and plasma micro-parameters a perfect knowledge of the plasma generation is a basic requirement for mastering a plasma deposition process. Therefore, different methods of generating microwave isotropic and anisotropic plasmas are discussed. Special attention is devoted to the mechanisms of plasma excitation and to the generation of a dense and homogeneous plasma in thin film technology are also presented.

  16. Women Technology Leaders: Gender Issues in Higher Education Information Technology

    Science.gov (United States)

    Drury, Marilyn

    2011-01-01

    Women working in higher education information technology (IT) organizations and those seeking leadership positions in these organizations face a double challenge in overcoming the traditionally male-dominated environments of higher education and IT. Three women higher education chief information officers (CIOs) provided their perspectives,…

  17. CO2 conversion by plasma technology: insights from modeling the plasma chemistry and plasma reactor design

    Science.gov (United States)

    Bogaerts, A.; Berthelot, A.; Heijkers, S.; Kolev, St.; Snoeckx, R.; Sun, S.; Trenchev, G.; Van Laer, K.; Wang, W.

    2017-06-01

    In recent years there has been growing interest in the use of plasma technology for CO2 conversion. To improve this application, a good insight into the underlying mechanisms is of great importance. This can be obtained from modeling the detailed plasma chemistry in order to understand the chemical reaction pathways leading to CO2 conversion (either in pure form or mixed with another gas). Moreover, in practice, several plasma reactor types are being investigated for CO2 conversion, so in addition it is essential to be able to model these reactor geometries so that their design can be improved, and the most energy efficient CO2 conversion can be achieved. Modeling the detailed plasma chemistry of CO2 conversion in complex reactors is, however, very time-consuming. This problem can be overcome by using a combination of two different types of model: 0D chemical reaction kinetics models are very suitable for describing the detailed plasma chemistry, while the characteristic features of different reactor geometries can be studied by 2D or 3D fluid models. In the first instance the latter can be developed in argon or helium with a simple chemistry to limit the calculation time; however, the ultimate aim is to implement the more complex CO2 chemistry in these models. In the present paper, examples will be given of both the 0D plasma chemistry models and the 2D and 3D fluid models for the most common plasma reactors used for CO2 conversion in order to emphasize the complementarity of both approaches. Furthermore, based on the modeling insights, the paper discusses the possibilities and limitations of plasma-based CO2 conversion in different types of plasma reactors, as well as what is needed to make further progress in this field.

  18. VLSI Technology: Impact and Promise. Identifying Emerging Issues and Trends in Technology for Special Education.

    Science.gov (United States)

    Bayoumi, Magdy

    As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper addresses the implications of very large scale integrated (VLSI) technology. The first section reviews the development of educational technology, particularly microelectronics technology, from the 1950s to the present. The implications…

  19. Mobile technology and healthcare: the adoption issues and systemic problems.

    Science.gov (United States)

    Standing, Susan; Standing, Craig

    2008-01-01

    Although the benefits that are associated with mobile technology have been recognised as offering great potential in the healthcare sector, its widespread adoption has been lagging. We propose that fundamental systemic issues are likely to be the main barriers to adoption. We explain that the fragmented nature of the conservative healthcare system, the contradictory incentives and improper outcome measures conspire to make the innovative adoption of mobile technology problematic. Researchers can only gain a limited understanding of a technology's potential success by using technology adoption frameworks and need to supplement this with a 'systems' perspective that takes a more strategic view.

  20. Plasmas for environmental issues: from hydrogen production to 2D materials assembly

    Science.gov (United States)

    Tatarova, E.; Bundaleska, N.; Sarrette, J. Ph; Ferreira, C. M.

    2014-12-01

    It is well recognized at present that the unique, high energy density plasma environment provides suitable conditions to dissociate/atomize molecules in remediation systems, to convert waste and biomass into sustainable energy sources, to purify water, to assemble nanostructures, etc. The remarkable plasma potential is based on its ability to supply simultaneously high fluxes of charged particles, chemically active molecules, radicals (e.g. O, H, OH), heat, highly energetic photons (UV and extreme UV radiation), and strong electric fields in intrinsic sheath domains. Due to this complexity, low-temperature plasma science and engineering is a huge, highly interdisciplinary field that spans many research disciplines and applications across many areas of our daily life and industrial activities. For this reason, this review deals only with some selected aspects of low-temperature plasma applications for a clean and sustainable environment. It is not intended to be a comprehensive survey, but just to highlight some important works and achievements in specific areas. The selected issues demonstrate the diversity of plasma-based applications associated with clean and sustainable ambiance and also show the unity of the underlying science. Fundamental plasma phenomena/processes/features are the common fibers that pass across all these areas and unify all these applications. Browsing through different topics, we try to emphasize these phenomena/processes/features and their uniqueness in an attempt to build a general overview. The presented survey of recently published works demonstrates that plasma processes show a significant potential as a solution for waste/biomass-to-energy recovery problems. The reforming technologies based on non-thermal plasma treatment of hydrocarbons show promising prospects for the production of hydrogen as a future clean energy carrier. It is also shown that plasmas can provide numerous agents that influence biological activity. The simultaneous

  1. 20. AINSE plasma science and technology conference. Conference handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The 20th AINSE plasma science and technology conference was held at Flinders University of South Australia on 13-14 February 1995. Topics under discussion included plasma physics studies, current status of rotamak devices, plasma processing and material studies. The handbook contains the conference program, 54 abstracts and a list of participants.

  2. Treatment and recycling of incinerated ash using thermal plasma technology.

    Science.gov (United States)

    Cheng, T W; Chu, J P; Tzeng, C C; Chen, Y S

    2002-01-01

    To treat incinerated ash is an important issue in Taiwan. Incinerated ashes contain a considerable amount of hazardous materials such as dioxins and heavy metals. If these hazardous materials are improperly treated or disposed of, they shall cause detrimental secondary contamination. Thermal plasma vitrification is a robust technology to treat and recycle the ash residues. Under the high temperature plasma environment, incinerated ashes are vitrified into benign slag with large volume reduction and extreme detoxification. Several one-step heat treatment processes are carried out at four temperatures (i.e. 850, 950, 1,050 and 1,150 degrees C) to obtain various "microstructure materials". The major phase to form these materials is a solid solution of gehlenite (Ca2Al2SiO7) and åkermanite (Ca2MgSi2O7) belonging to the melilite group. The physical and mechanical properties of the microstructure materials are improved by using one-step post-heat treatment process after plasma vitrification. These microstructure materials with good quality have great potential to serve as a viable alternative for construction applications.

  3. Introduction to Plasma Technology Science, Engineering and Applications

    CERN Document Server

    Harry, John Ernest

    2011-01-01

    Written by a university lecturer with more than forty years experience in plasma technology, this book adopts a didactic approach in its coverage of the theory, engineering and applications of technological plasmas. The theory is developed in a unified way to enable brevity and clarity, providing readers with the necessary background to assess the factors that affect the behavior of plasmas under different operating conditions. The major part of the book is devoted to the applications of plasma technology and their accompanying engineering aspects, classified by the various pressure and densit

  4. Effective surveillance for homeland security balancing technology and social issues

    CERN Document Server

    Flammini, Francesco; Franceschetti, Giorgio

    2013-01-01

    Effective Surveillance for Homeland Security: Balancing Technology and Social Issues provides a comprehensive survey of state-of-the-art methods and tools for the surveillance and protection of citizens and critical infrastructures against natural and deliberate threats. Focusing on current technological challenges involving multi-disciplinary problem analysis and systems engineering approaches, it provides an overview of the most relevant aspects of surveillance systems in the framework of homeland security. Addressing both advanced surveillance technologies and the related socio-ethical issues, the book consists of 21 chapters written by international experts from the various sectors of homeland security. Part I, Surveillance and Society, focuses on the societal dimension of surveillance-stressing the importance of societal acceptability as a precondition to any surveillance system. Part II, Physical and Cyber Surveillance, presents advanced technologies for surveillance. It considers developing technologie...

  5. Radiant-and-plasma technology for coal processing

    OpenAIRE

    Vladimir Messerle; Alexander Ustimenko

    2012-01-01

    Radiant-and-plasma technology for coal processing is presented in the article. Thermodynamic computation and experiments on plasma processing of bituminous coal preliminary electron-beam activated were fulfilled in comparison with plasma processing of the coal. Positive influence of the preliminary electron-beam activation of coal on synthesis gas yield was found. Experiments were carried out in the plasma gasifier of 100 kW power. As a result of the measurements of material and heat balance ...

  6. Teaching Undergraduate Mathematics Using CAS Technology: Issues and Prospects

    Science.gov (United States)

    Tobin, Patrick C.; Weiss, Vida

    2016-01-01

    The use of handheld CAS technology in undergraduate mathematics courses in Australia is paradoxically shrinking under sustained disapproval or disdain from the professional mathematics community. Mathematics education specialists argue with their mathematics colleagues over a range of issues in course development and this use of CAS or even…

  7. REVIEW: Trends And Issues In Instructional Design And Technology

    OpenAIRE

    AKBULUT, Reviewed By Yavuz

    2015-01-01

    “Trends and Issues in Instructional Design and Technology” is a reader friendly reference source on instructional design and technology (IDT) helping both professionals in the field and novice practitioners trying to get used to the trends and concepts of the field.

  8. Learning the Hard Way? Issues in the Adoption of New Technology in Small Technology Oriented Firms

    Science.gov (United States)

    Chibelushi, Caroline

    2008-01-01

    Purpose: The purpose of this paper is to explore, through a survey and two short case studies, the issues smaller firms face with the adoption of new technologies. Design/methodology/approach: A survey of the pressures to adopt new technologies and the existence of specialist technology skills was conducted of small ICT oriented firms in the West…

  9. Plasma technology - a novel solution for CO2 conversion?

    Science.gov (United States)

    Snoeckx, Ramses; Bogaerts, Annemie

    2017-08-21

    CO2 conversion into value-added chemicals and fuels is considered as one of the great challenges of the 21st century. Due to the limitations of the traditional thermal approaches, several novel technologies are being developed. One promising approach in this field, which has received little attention to date, is plasma technology. Its advantages include mild operating conditions, easy upscaling, and gas activation by energetic electrons instead of heat. This allows thermodynamically difficult reactions, such as CO2 splitting and the dry reformation of methane, to occur with reasonable energy cost. In this review, after exploring the traditional thermal approaches, we have provided a brief overview of the fierce competition between various novel approaches in a quest to find the most effective and efficient CO2 conversion technology. This is needed to critically assess whether plasma technology can be successful in an already crowded arena. The following questions need to be answered in this regard: are there key advantages to using plasma technology over other novel approaches, and if so, what is the flip side to the use of this technology? Can plasma technology be successful on its own, or can synergies be achieved by combining it with other technologies? To answer these specific questions and to evaluate the potentials and limitations of plasma technology in general, this review presents the current state-of-the-art and a critical assessment of plasma-based CO2 conversion, as well as the future challenges for its practical implementation.

  10. Technical issues in the conduct of large space platform experiments in plasma physics and geoplasma sciences

    Science.gov (United States)

    Szuszczewicz, Edward P.

    1986-01-01

    Large, permanently-manned space platforms can provide exciting opportunities for discoveries in basic plasma and geoplasma sciences. The potential for these discoveries will depend very critically on the properties of the platform, its subsystems, and their abilities to fulfill a spectrum of scientific requirements. With this in mind, the planning of space station research initiatives and the development of attendant platform engineering should allow for the identification of critical science and technology issues that must be clarified far in advance of space station program implementation. An attempt is made to contribute to that process, with a perspective that looks to the development of the space station as a permanently-manned Spaceborne Ionospheric Weather Station. The development of this concept requires a synergism of science and technology which leads to several critical design issues. To explore the identification of these issues, the development of the concept of an Ionospheric Weather Station will necessarily touch upon a number of diverse areas. These areas are discussed.

  11. Cloud Computing : Goals, Issues, SOA, Integrated Technologies and Future -scope

    Directory of Open Access Journals (Sweden)

    V. Madhu Viswanatham

    2016-10-01

    Full Text Available The expansion of networking infrastructure has provided a novel way to store and access resources in a reliable, convenient and affordable means of technology called the Cloud. The cloud has become so popular and established its dominance in many recent world innovations and has highly influenced the trend of the Business process Management with the advantage of shared resources. The ability to remain disaster tolerant, on-demand scalability, flexible deployment and cost effectiveness has made the future world technologies like Internet of Things, to determine the cloud as their data and processing center. However, along with the implementation of cloud based technologies, we must also address the issues involved in its realization. This paper is a review on the advancements, scopes and issues involved in realizing a secured cloud powered environments.

  12. Computer technology in education and issues of power and equity

    Directory of Open Access Journals (Sweden)

    Alper Kesten

    2010-05-01

    Full Text Available This study aims to use ‘techniques of power’ classified (based on Foucault’s work by Gore in order to illustrate power relations between supporters (or non-supporters of computer technology and teachers. For this purpose, six out of eight techniques of power (surveillance, normalization, exclusion, classification, distribution and regulation is used in formulating thoughts about computer technology and issues of power and equity. In this study, these techniques of power were discussed more detailed both to exemplify how supporters (or non-supporters of computer technology exercise power over teachers (preservice or inservice by using of major techniques of power and to show how they are related to the issue of equity.

  13. Possible future environmental issues for fossil fuel technologies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Attaway, L.D.

    1979-07-01

    The work reported here was carried out for the Department of Energy's Office of Fossil Energy to identify and assess 15 to 20 major environmental issues likely to affect the implementation of fossil energy technologies between 1985 and 2000. The energy technologies specifically addressed are: oil recovery and processing; gas recovery and processing; coal liquefaction; coal gasification (surface); in situ coal gasification; direct coal combustion; advanced power systems; magnetohydrodynamics; surface oil shale retorting; and true and modified in situ oil shale retorting. Environmental analysis of these technologies included, in addition to the main processing steps, the complete fuel cycle from resource extraction to end use. The 16 environmental issues identified as those most likely for future regulatory actions and the main features of, and the possible regulatory actions associated with, each are as follows: disposal of solid waste from coal conversion and combustion technologies; water consumption by coal and oil shale conversion technologies; siting of coal conversion facilities; the carbon dioxide greenhouse effect; emission of polycyclic organic matter (POM); impacts of outer continental shelf (OCS) oil development; emission of trace elements; groundwater contamination; liquefied natural gas (LNG), safety and environmental factors; underground coal mining - health and safety; fugitive emissions from coal gasification and liquefaction - health and safety; boomtown effects; emission of fine particulates from coal, oil and oil shale technologies; emission of radioactivity from the mining and conversion of coal; emission of nitrogn oxides; and land disturbance from surface mining. (LTN)

  14. ECONOMIC AND ENERGETICAL ANALYSIS OF IMPROVED WASTE UTILIZATION PLASMA TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Serghei VAMBOL

    2015-07-01

    Full Text Available Purpose. Energy and economic evaluation of the improved plasma waste utilization technological process, as well as an expediency substantiation of the use of improved plasma technology by comparing its energy consumption with other thermal methods of utilization. Methodology. Analysis of existing modern and advanced methods of waste management and its impact on environmental safety. Considering of energy and monetary costs to implement two different waste management technologies. Results. Studies have shown regular gasification ensure greater heating value due to differences, a significant amount of nitrogen than for plasma gasification. From the point of view of minimizing energy and monetary costs and environmental safety more promising is to offer advanced technology for plasma waste. To carry out the energy assessment of the appropriateness of the considered technologies-comparative calculation was carried out at the standard conditions. This is because in the processing of waste produced useful products, such as liquefied methane, synthetic gas (94% methane and a fuel gas for heating, suitable for sale that provides cost-effectiveness of this technology. Originality. Shown and evaluated ecological and economic efficiency of proposed improved plasma waste utilization technology compared with other thermal techniques. Practical value. Considered and grounded of energy and monetary costs to implement two different waste management technologies, namely ordinary gasification and using plasma generators. Proposed plasma waste utilization technology allows to obtain useful products, such as liquefied methane, synthetic gas and a fuel gas for heating, which are suitable for sale. Plant for improved plasma waste utilization technological process allows to compensate the daily and seasonal electricity and heat consumption fluctuations by allowing the storage of obtained fuel products.

  15. Plasma enhanced C1 chemistry for green technology

    Science.gov (United States)

    Nozaki, Tomohiro

    2013-09-01

    Plasma catalysis is one of the innovative next generation green technologies that meet the needs for energy and materials conservation as well as environmental protection. Non-thermal plasma uniquely generates reactive species independently of reaction temperature, and these species are used to initiate chemical reactions at unexpectedly lower temperatures than normal thermochemical reactions. Non-thermal plasma thus broadens the operation window of existing chemical conversion processes, and ultimately allows modification of the process parameters to minimize energy and material consumption. We have been specifically focusing on dielectric barrier discharge (DBD) as one of the viable non-thermal plasma sources for practical fuel reforming. In the presentation, room temperature one-step conversion of methane to methanol and hydrogen using a miniaturized DBD reactor (microplasma reactor) is highlighted. The practical impact of plasma technology on existing C1-chemistry is introduced, and then unique characteristics of plasma fuel reforming such as non-equilibrium product distribution is discussed.

  16. TECHNOLOGY EVALUATION REPORT: RETECH'S PLASMA CENTRIFUGAL FURNACE - VOLUME I

    Science.gov (United States)

    A demonstration of the Retech, Inc. Plasma Centrifugal Furnace (PCF) was conducted under the Superfund Innovative Technology Evaluation (SITE) Program at the Department of Energy's (DOE's) Component Development and Integration Facility in Butte, Montana. The furnace uses heat gen...

  17. Functionalising surfaces at the nanoscale using plasma technology.

    Science.gov (United States)

    Moore, R

    2009-01-01

    Plasma technology offers a highly effective toolbox for nanoscale surface engineering of materials. The potential variety of nanoscale features and new properties that can be achieved are reviewed here.

  18. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  19. Plasma Cathode Electron Sources Physics, Technology, Applications

    CERN Document Server

    Oks, Efim

    2006-01-01

    This book fills the gap for a textbook describing this kind of electron beam source in a systematic and thorough manner: from physical processes of electron emission to examples of real plasma electron sources and their applications.

  20. Plasma arc cutting technology: simulation and experiments

    Energy Technology Data Exchange (ETDEWEB)

    Cantoro, G; Colombo, V; Concetti, A; Ghedini, E; Sanibondi, P; Zinzani, F; Rotundo, F [Department of Mechanical Engineering (D.I.E.M.) and Research Center for Applied Mathematics (C.I.R.A.M.), Alma Mater Studiorum-Universita di Bologna, Via Saragozza 8, 40123 Bologna (Italy); Dallavalle, S; Vancini, M, E-mail: emanuele.ghedini@unibo.it [Cebora S.p.A., Via Andrea Costa 24, 40057 Cadriano di Granarolo (Italy)

    2011-01-01

    Transferred arc plasma torches are widely used in industrial processes for cutting of metallic materials because of their ability to cut a wide range of metals with very high productivity. The process is characterized by a transferred electric arc established between an electrode inside the torch (the cathode) and another electrode, the metallic workpiece to be cut (the anode). In order to obtain a high quality cut and a high productivity, the plasma jet must be as collimated as possible and must have the higher achievable power density. Plasma modelling and numerical simulation can be very useful tools for the designing and optimizing these devices, but research is still in the making for finding a link between simulation of the plasma arc and a consistent prevision of cut quality. Numerical modelling of the behaviour of different types of transferred arc dual gas plasma torches can give an insight on the physical reasons for the industrial success of various design and process solutions that have appeared over the last years. Diagnostics based on high speed imaging and Schlieren photography can play an important role for investigating piercing, dross generation, pilot arcing and anode attachment location. Also, the behaviour of hafnium cathodes at high current levels at the beginning of their service life can been experimentally investigated, with the final aim of understanding the phenomena that take place during those initial piercing and cutting phases and optimizing the initial shape of the surface of the emissive insert exposed to plasma atmosphere.

  1. Environmental Decision Making and Information Technology: Issues Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Barg, S.; Fletcher, T.; Mechling, J.; Tonn, B.; Turner, R.

    1999-05-01

    This report presents a summary of the Information Technology and Environmental Decision Making Workshop that was held at Harvard University, October 1-3, 1998. Over sixty participants from across the US took part in discussions that focused on the current practice of using information technology to support environmental decision making and on future considerations of information technology development, information policies, and data quality issues in this area. Current practice is focusing on geographic information systems and visualization tools, Internet applications, and data warehousing. In addition, numerous organizations are developing environmental enterprise systems to integrate environmental information resources. Plaguing these efforts are issues of data quality (and public trust), system design, and organizational change. In the future, much effort needs to focus on building community-based environmental decision-making systems and processes, which will be a challenge given that exactly what needs to be developed is largely unknown and that environmental decision making in this arena has been characterized by a high level of conflict. Experimentation and evaluation are needed to contribute to efficient and effective learning about how best to use information technology to improve environmental decision making.

  2. History of artificial cold, scientific, technological and cultural issues

    CERN Document Server

    2014-01-01

    The history of artificial cold has been a rather intriguing interdisciplinary subject (physics, chemistry, technology, sociology, economics, anthropology, consumer studies) which despite some excellent monographs and research papers, has not been systematically exploited. It is a subject with all kinds of scientific, technological as well as cultural dimensions. For example, the common home refrigerator has brought about unimaginably deep changes to our everyday lives changing drastically eating habits and shopping mentalities. From the end of the 19th century to the beginning of the 21st, issues related to the production and exploitation of artificial cold have never stopped to provide us with an incredibly interesting set of phenomena, novel theoretical explanations, amazing possibilities concerning technological applications and all encompassing cultural repercussions. The discovery of the unexpected and “bizarre” phenomena of superconductivity and superfluidity, the necessity to incorporate macroscopi...

  3. Some ethical issues in technology transfer and applications

    Science.gov (United States)

    Shine, Kenneth I.

    1995-10-01

    Health care systems all around the world are struggling to provide care in an era of limited resources. In an article entitled, 'Straight Talk About Rationing,' Arthur Kaplan reviews the work of the Swedish Commission designed to prioritize health care for that country. The commission identified three core principles that they felt should underlie decisions about priorities for health care. Those principles were (1) all human beings are equally valuable; (2) society must pay special attention to the needs of the weakest and most vulnerable; and (3) all other things being equal, cost efficiency in gaining the greatest return for the amount of money spent must prevail. These are three extremely useful principles which can be helpful to us as we consider many of the issues confronted in this country about the allocation of resources for health. I would like to consider three major issues. The first issue is the current evolving nature of health care and the ethical dilemmas that exist in the present system. In balancing increased access to care with decreasing cost, particularly in managed care, all of us are concerned about ethical issues. I would like to emphasize that the current system -- the system that we have lived with and is changing -- has inherent in it a series of ethical dilemmas. Secondly, I would like to consider issues related to productivity and its measurement in relation to technology. This relates to the third item in the Swedish Commission, which is the principle that we ought to spend money in the most cost-efficient way. Finally, I would like to discuss the dilemma of decision making about health and how that impacts upon the ethics of health care in the application of technology.

  4. Ideal Coulomb Plasma Approximation in Line Shape Models: Problematic Issues

    Directory of Open Access Journals (Sweden)

    Joel Rosato

    2014-06-01

    Full Text Available In weakly coupled plasmas, it is common to describe the microfield using a Debye model. We examine here an “artificial” ideal one-component plasma with an infinite Debye length, which has been used for the test of line shape codes. We show that the infinite Debye length assumption can lead to a misinterpretation of numerical simulations results, in particular regarding the convergence of calculations. Our discussion is done within an analytical collision operator model developed for hydrogen line shapes in near-impact regimes. When properly employed, this model can serve as a reference for testing the convergence of simulations.

  5. Issues of social policy and ethics in gene technology.

    Science.gov (United States)

    Sade, R M

    1994-09-01

    Technical developments in the last ten years have made possible mapping and sequencing of the entire human genome, along with the possibility of treating genetic disorders by manipulating DNA. A variety of issues regarding potential uses and abuses of these technologies have become apparent. They relate to both genetic screening and gene therapy. Problems facing individuals and their families mostly revolve around rights of self-determination and of confidentiality. Health care professionals will need to design optimal systems to provide genetic counseling and to protect confidentiality of DNA data bases. Society and social institutions will need to develop policies and laws that protect the privacy of individuals whose DNA is stored in data banks. Patenting of the results of gene research remains controversial internationally. Moreover, there is concern in many quarters about society's potential abuse of gene technology for eugenic purposes. Gene therapy is now a reality. There is little disagreement on the use of gene therapy to treat genetic diseases in individuals by somatic cell therapy. There is much controversy, however, over the use of germ-line cell therapy. Gene technology has contributed to the growth among a small group of influential people of the Post-Modern Movement, which is strongly antiscience and antitechnology. This movement may pose a long-term threat to future technological advances and should not be ignored. There is much outside of the laboratory that scientists, particularly molecular biologists, can do to assure a secure place for science and technology in our culture.

  6. Emerging Issues and Opportunities in Health Information Technology.

    Science.gov (United States)

    Nardi, Elizabeth A; Lentz, Lisa Korin; Winckworth-Prejsnar, Katherine; Abernethy, Amy P; Carlson, Robert W

    2016-10-01

    When used effectively, health information technology (HIT) can transform clinical care and contribute to new research discoveries. Despite advances in HIT and increased electronic health record adoption, many challenges to optimal use, interoperability, and data sharing exist. Data standardization across systems is limited, and scanned medical note documents result in unstructured data that make reporting on quality measures for reimbursement burdensome. Different policies and initiatives, including the Health Information Technology for Economic and Clinical Health Act, the Medicare Access and CHIP Reauthorization Act, and the National Cancer Moonshot initiative, among others, all recognize the impact that HIT can have on cancer care. Given the growing role HIT plays in health care, it is vital to have effective and efficient HIT systems that can exchange information, collect credible data that is analyzable at the point of care, and improves the patient-provider relationship. In June 2016, NCCN hosted the Emerging Issues and Opportunities in Health Information Technology Policy Summit. The summit addressed challenges, issues, and opportunities in HIT as they relate to cancer care. Keynote presentations and panelists discussed moving beyond Meaningful Use, HIT readiness to support and report on quality care, the role of HIT in precision medicine, the role of HIT in the National Cancer Moonshot initiative, and leveraging HIT to improve quality of clinical care.

  7. Low pressure plasmas and microstructuring technology

    CERN Document Server

    Franz, Gerhard

    2009-01-01

    A monograph that presents a perspective of gas discharge physics and its applications to various industries. It presents an overview of the different types to generate plasmas by DC discharges, capacitive and inductive radiofrequency coupling, helicon waves including electron cyclotron resonance, and ion beams.

  8. Cold atmospheric plasma - A new technology for spacecraft component decontamination

    Science.gov (United States)

    Shimizu, Satoshi; Barczyk, Simon; Rettberg, Petra; Shimizu, Tetsuji; Klaempfl, Tobias; Zimmermann, Julia L.; Hoeschen, Till; Linsmeier, Christian; Weber, Peter; Morfill, Gregor E.; Thomas, Hubertus M.

    2014-01-01

    Cold atmospheric plasma (CAP) based on the Surface Micro-Discharge (SMD) technology was investigated for inactivation of different bacteria and endospores. The used technique was developed to serve as an alternative method for the decontamination of spacecraft components based on the COSPAR planetary protection policy where currently the dry heat microbial reduction method is the only applicable way to satisfy the required demands. However it is known, that dry heat can thermally damage sophisticated components installed on the device. Therefore, the development of a low temperature sterilization system is one of the high priority issues for upcoming space missions in the extraterrestrial field. In the study presented here, the vegetative bacteria Escherichia coli and Deinococcus radiodurans and several types of bacterial endospores - including Bacillus atrophaeus, Bacillus safensis, Bacillus megaterium, Bacillus megaterium 2c1 and Bacillus thuringiensis E24 - were inactivated by exposing them indirectly i.e. only to the reactive gases produced by the SMD electrode at room temperature. The results showed a 5 log inactivation for E. coli after 10 min of exposure. In contrast D. radiodurans proved to be more resistant resulting in a reduction of 3 log after exposure of 30 min. More than 6 log reductions were achieved for B. safensis, B. megaterium and B. megaterium 2c1 after 90 min of exposure. Furthermore the applicability of the used CAP system for spacecraft decontamination according to the planetary protection policy was investigated. This included also the investigation of the inactivation homogeneity by the plasma gas, the control of the temperature at the area of interest, the measurement of the O3 density in the treatment region and the detailed investigation of the effects of the exposure on different materials.

  9. Technological issues and experimental design of gene association studies.

    Science.gov (United States)

    Distefano, Johanna K; Taverna, Darin M

    2011-01-01

    Genome-wide association studies (GWAS), in which thousands of single-nucleotide polymorphisms (SNPs) spanning the genome are genotyped in individuals who are phenotypically well characterized, -currently represent the most popular strategy for identifying gene regions associated with common -diseases and related quantitative traits. Improvements in technology and throughput capability, development of powerful statistical tools, and more widespread acceptance of pooling-based genotyping approaches have led to greater utilization of GWAS in human genetics research. However, important considerations for optimal experimental design, including selection of the most appropriate genotyping platform, can enhance the utility of the approach even further. This chapter reviews experimental and technological issues that may affect the success of GWAS findings and proposes strategies for developing the most comprehensive, logical, and cost-effective approaches for genotyping given the population of interest.

  10. Empowering Learners for Lifelong Competence Development: Pedagogical, Organizational and Technological Issues

    NARCIS (Netherlands)

    Sligte, Henk; Koper, Rob

    2008-01-01

    Sligte, H., & Koper, R. (Eds.) (2008). Empowering Learners for Lifelong Competence Development: Pedagogical, Organizational and Technological Issues. International Journal Emerging Technologies in Learning, 3, 4-6.

  11. Issues surrounding the health economic evaluation of genomic technologies

    Science.gov (United States)

    Buchanan, James; Wordsworth, Sarah; Schuh, Anna

    2014-01-01

    Aim Genomic interventions could enable improved disease stratification and individually tailored therapies. However, they have had a limited impact on clinical practice to date due to a lack of evidence, particularly economic evidence. This is partly because health economists are yet to reach consensus on whether existing methods are sufficient to evaluate genomic technologies. As different approaches may produce conflicting adoption decisions, clarification is urgently required. This article summarizes the methodological issues associated with conducting economic evaluations of genomic interventions. Materials & methods A structured literature review was conducted to identify references that considered the methodological challenges faced when conducting economic evaluations of genomic interventions. Results Methodological challenges related to the analytical approach included the choice of comparator, perspective and timeframe. Challenges in costing centered around the need to collect a broad range of costs, frequently, in a data-limited environment. Measuring outcomes is problematic as standard measures have limited applicability, however, alternative metrics (e.g., personal utility) are underdeveloped and alternative approaches (e.g., cost–benefit analysis) underused. Effectiveness data quality is weak and challenging to incorporate into standard economic analyses, while little is known about patient and clinician behavior in this context. Comprehensive value of information analyses are likely to be helpful. Conclusion Economic evaluations of genomic technologies present a particular challenge for health economists. New methods may be required to resolve these issues, but the evidence to justify alternative approaches is yet to be produced. This should be the focus of future work in this field. PMID:24236483

  12. Status of Issues in U.S. Edge-Plasma Research and Priority Topics for the Next Five Years

    Energy Technology Data Exchange (ETDEWEB)

    Bateman, G; Chang, C; Fenstermacher, M; Guzdar, P; Hahm, T S; Krasheninnikov, S; Kritz, A; Rognlien, T D; Schnack, D; Schultz, D; Snyder, P; Stotler, D; Terry, J; Ulrickson, M; Bolton, C

    2005-03-16

    The Edge Coordinating Committee (ECC) was formed in July 14-15, 2004 when OFES Theory Team invited 14 plasma researchers to a two-day meeting in Germantown, MD to discuss the state of edge-plasma research in the U.S. with a focus on theory and modeling (see http://www.mfescience.org/ecc/ ecc/). At that time, OFES tasked the ECC with providing, in about a six month period, a report on the present status of key issues in this area together with a roadmap of what range of activities should be undertaken in the next five years to resolve these issues. This document is a response to that charge. Future edge-plasma research described here is assumed to fit into a budget constraint of a ''flat budget,'' with some additional activities cited for budget increases of as much as 50%. To obtain some measure of the relative fraction of OFES Theory funding presently devoted to edge plasma research, the OFES Theory Team informally surveyed funded work they support in this area at National Labs, Universities, and industry. John Mandrekas reported to us that approximately 10% of the present budget goes to edge-physics areas at 10 institutions, for a total of {approx}$2.5M each year. While not explicitly estimated, we note that there are also important edge plasma projects in the Plasma Technology program, especially related to plasma/material sputtering interactions, near-surface plasma chemistry and transport, and impurity transport. Likewise, the Confinement Program has important efforts in interpreting edge-plasma data through modeling codes. This initial status/roadmap work of the ECC is complimentary to the Fusion Energy Science Sciences Advisory Committee (FESAC) Panel on Program Priorities (see http://www.mfescience.org/fesac/ fesac/). This Panel is charged with identifying major science and technology issues for all of controlled fusion and also with recommending campaigns to address these issues. The Panel has organized their report along six thematic

  13. Study on the application of plasma technology to advanced global environmental harmony type technology; Kankyo chowagata gijutsu no kodoka eno plasma no oyo ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Plasma application technology is systematically investigated. Fundamental feature of plasma, method of plasma generation, special features of plasma, and its application area are arranged. The present application area of plasma chemical reaction in industry has been arranged for each utilization and process according to the patents research and scientific journals. For the global environmental harmony type technology, functions required for the membrane separators are investigated by assuming the recovery of environmental load substances, and possible manufacturing process of the membrane by using plasma technology is also investigated. For the improvement of catalysis by the plasma process, the requirement for the catalyst, a fine particle effect for catalyst, production of catalyst, plasma technology applicable to the improvement of catalyst, thermal plasma, and low-temperature plasma are described. For the application of plasma to enhance the catalysis reaction, synthesis of ammonia and methanol are described. 177 refs., 67 figs., 18 tabs.

  14. Plasma Arc Surface Hardening Robot Technology

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In national economy and national defense, a lot of ma chine components become worthless early because of wear and tear and corrode. It leads to huge loss of resource and material. Surface hardening of the steel cou ld form a hard, wearable, corrode-resisting layer on the surface to enhance the mechanical property of the machine component. From 1980s, there is a new method of surface hardening that is heating with plasma arc. It overcomes the shortage of old methods and is adopted in automotive product ...

  15. Plasma Technology as a New Preservation Technique

    Science.gov (United States)

    Rincón, R.; Calzada, M. D.

    The preliminary results of using the surface wave discharge at the atmospheric pressure on groups of lentils and sherry Fino wine samples are presented. In this research, the capability of active species and UV radiation from the plasma, has been assessed on preservation of food. Besides, the generation and emission of both excited molecules in a metastable state N2}(B3Π {g-> A3}Σ u{+) and the de-excitation of species NO(A2}Σ {+) producing UV radiation have been also studied.

  16. Cold Atmospheric Plasma Technology for Decontamination of Space Equipment

    Science.gov (United States)

    Thomas, Hubertus; Rettberg, Petra; Shimizu, Tetsuji; Thoma, Markus; Morfill, Gregor; Zimmermann, Julia; Müller, Meike; Semenov, Igor

    2016-07-01

    Cold atmospheric plasma (CAP) technology is very fast and effective in inactivation of all kinds of pathogens. It is used in hygiene and especially in medicine, since the plasma treatment can be applied to sensitive surfaces, like skin, too. In a first study to use CAP for the decontamination of space equipment we could show its potential as a quite promising alternative to the standard "dry heat" and H2O2 methods [Shimizu et al. Planetary and Space Science, 90, 60-71. (2014)]. In a follow-on study we continue the investigations to reach high application level of the technology. First, we redesign the actual setup to a plasma-gas circulation system, increasing the effectivity of inactivation and the sustainability. Additionally, we want to learn more about the plasma chemistry processes involved in the inactivation. Therefore, we perform detailed plasma and gas measurements and compare them to numerical simulations. The latter will finally be used to scale the decontamination system to sizes useful also for larger space equipment. Typical materials relevant for space equipment will be tested and investigated on surface material changes due to the plasma treatment. Additionally, it is planned to use electronic boards and compare their functionality before and after the CAP expose. We will give an overview on the status of the plasma decontamination project funded by the Bavarian Ministry of Economics.

  17. Critical Issues Forum: A multidisciplinary educational program integrating computer technology

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, R.J.; Robertson, B.; Jacobs, D. [Los Alamos National Lab., NM (United States)

    1998-09-01

    The Critical Issues Forum (CIF) funded by the US Department of Energy is a collaborative effort between the Science Education Team of Los Alamos National Laboratory (LANL) and New Mexico high schools to improve science education throughout the state of New Mexico as well as nationally. By creating an education relationship between the LANL with its unique scientific resources and New Mexico high schools, students and teachers participate in programs that increase not only their science content knowledge but also their critical thinking and problem-solving skills. The CIF program focuses on current, globally oriented topics crucial to the security of not only the US but to that of all nations. The CIF is an academic-year program that involves both teachers and students in the process of seeking solutions for real world concerns. Built around issues tied to LANL`s mission, participating students and teachers are asked to critically investigate and examine the interactions among the political, social, economic, and scientific domains while considering diversity issues that include geopolitical entities and cultural and ethnic groupings. Participants are expected to collaborate through telecommunications during the research phase and participate in a culminating multimedia activity, where they produce and deliver recommendations for the current issues being studied. The CIF was evaluated and found to be an effective approach for teacher professional training, especially in the development of skills for critical thinking and questioning. The CIF contributed to students` ability to integrate diverse disciplinary content about science-related topics and supported teachers in facilitating the understanding of their students using the CIF approach. Networking technology in CIF has been used as an information repository, resource delivery mechanism, and communication medium.

  18. Engineering Issue: Technology Alternatives for the Remediation of PCB Contaminated Soils and Sediments

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Engineering Issue papers are a series of documents that summarize the available information on specific contaminates, selected treatment and site remediation technologies, and related issues. This Engineering Issue paper is intended...

  19. Recent development of plasma pollution control technology: a critical review

    Directory of Open Access Journals (Sweden)

    Jen-Shih Chang

    2001-01-01

    Full Text Available Gaseous pollution control, solid and liquid waste treatments have been commercialized based on incineration, catalysis, adsorption, disposal with landfill, etc. More recently technology based on plasmas has become significant due to the advantages such as lower costs, higher treatment and energy efficiencies, smaller space volume, etc. In order to commercialize this new technology, the treatment rate, energy efficiency of treatment, pressure drop of reactor, reusable by-products production rate, must be improved, based on the identifications of major fundamental mechanism of processes, optimizations of reactor, and power supply for an integrated system. In this work, recent development of plasma pollution control technology was critically reviewed and the principle of processes and reactor technologies were outlined. Special attention will be focused on material processing generated pollutants.

  20. Development of a plasma panel radiation detector: recent progress and key issues

    CERN Document Server

    Silver, Yiftah; Beene, James R; Benhammou, Yan; Ben-Moshe, Meny; Chapman, J W; Dai, Tiesheng; Etzion, Erez; Ferretti, Claudio; Guttman, Nir; Friedman, Peter S; Levin, Daniel S; Ritt, S; Varner, Robert L; Weaverdyck, Curtis; Zhou, Bing

    2012-01-01

    A radiation detector based on plasma display panel technology, which is the principal component of plasma television displays is presented. Plasma Panel Sensor (PPS) technology is a variant of micropattern gas radiation detectors. The PPS is conceived as an array of sealed plasma discharge gas cells which can be used for fast response (O(5ns) per pixel), high spatial resolution detection (pixel pitch can be less than 100 micrometer) of ionizing and minimum ionizing particles. The PPS is assembled from non-reactive, intrinsically radiation-hard materials: glass substrates, metal electrodes and inert gas mixtures. We report on the PPS development program, including simulations and design and the first laboratory studies which demonstrate the usage of plasma display panels in measurements of cosmic ray muons, as well as the expansion of experimental results on the detection of betas from radioactive sources.

  1. Plasma technology and its use in flat panel digital radiography.

    Science.gov (United States)

    Zur, Albert

    2010-01-01

    Plasma DR technology is used to produce a cost effective flat panel x-ray detector that acquires digital x-ray images with excellent diagnostic quality. The detector is radiation hard and permanently zero defect, with a full virtual pixel matrix that has no dead lines, pixels, or dead pixel clusters. The technology also allows the full potential of large area amorphous Selenium imaging to finally be realized (see Figure 4).

  2. Workshop on technology issues of superconducting Maglev transportation systems

    Energy Technology Data Exchange (ETDEWEB)

    Wegrzyn, J.E. (Brookhaven National Lab., Upton, NY (United States)); Shaw, D.T. (New York State Inst. of Superconductivity, Buffalo, NY (United States))

    1991-09-27

    There exists a critical need in the United States to improve its ground transportation system. One suggested system that offers many advantages over the current transportation infrastructure is Maglev. Maglev represents the latest evolution in very high and speed ground transportation, where vehicles are magnetically levitated, guided, and propelled over elevated guideways at speeds of 300 miles per hour. Maglev is not a new concept but is, however, receiving renewed interest. The objective of this workshop was to further promote these interest by bringing together a small group of specialists in Maglev technology to discuss Maglev research needs and to identify key research issues to the development of a successful Maglev system. The workshop was organized into four sessions based on the following technical areas: Materials, Testing, and Shielding; Magnet Design and Cryogenic Systems; Propulsion and Levitation Systems; and, System Control and Integration.

  3. Recycling of the Electronic Waste Applying the Plasma Reactor Technology

    Science.gov (United States)

    Lázár, Marián; Jasminská, Natália; Čarnogurská, Mária; Dobáková, Romana

    2016-12-01

    The following paper discusses a high-temperature gasification process and melting of electronic components and computer equipment using plasma reactor technology. It analyses the marginal conditions of batch processing, as well as the formation of solid products which result from the procedure of waste processing. Attention is also paid to the impact of the emerging products on the environment.

  4. Recycling of the Electronic Waste Applying the Plasma Reactor Technology

    Directory of Open Access Journals (Sweden)

    Lázár Marián

    2016-12-01

    Full Text Available The following paper discusses a high-temperature gasification process and melting of electronic components and computer equipment using plasma reactor technology. It analyses the marginal conditions of batch processing, as well as the formation of solid products which result from the procedure of waste processing. Attention is also paid to the impact of the emerging products on the environment.

  5. A New Waste Disposal Technology-plasma arc Pyrolysis System

    Institute of Scientific and Technical Information of China (English)

    黄建军; 施嘉标; 梁荣庆; 刘正之

    2003-01-01

    This paper introduces a new waste disposal technology with plasma arc. Being different from conventional combustion or burning such as incineration, it is based on a process called controlled pyrolysis-thermal destruction and recovery process. It has four advantages, they are completely safe, clean, high-energy synthesis gas, non-toxic vitrified slag and metal.

  6. Introduction to the Special Issue on "State-of-the-Art Sensor Technology in Japan 2015".

    Science.gov (United States)

    Tokumitsu, Masahiro; Ishida, Yoshiteru

    2016-08-23

    This Special Issue, "State-of-the-Art Sensor Technology in Japan 2015", collected papers on different kinds of sensing technology: fundamental technology for intelligent sensors, information processing for monitoring humans, and information processing for adaptive and survivable sensor systems.[...].

  7. Radiant-and-plasma technology for coal processing

    Directory of Open Access Journals (Sweden)

    Vladimir Messerle

    2012-12-01

    Full Text Available Radiant-and-plasma technology for coal processing is presented in the article. Thermodynamic computation and experiments on plasma processing of bituminous coal preliminary electron-beam activated were fulfilled in comparison with plasma processing of the coal. Positive influence of the preliminary electron-beam activation of coal on synthesis gas yield was found. Experiments were carried out in the plasma gasifier of 100 kW power. As a result of the measurements of material and heat balance of the process gave the following integral indicators: weight-average temperature of 2200-2300 K, and carbon gasification degree of 82,4-83,2%. Synthesis gas yield at thermochemical preparation of raw coal dust for burning was 24,5% and in the case of electron-beam activation of coal synthesis gas yield reached 36,4%, which is 48% higher.

  8. Plasma Modeling Enabled Technology Development Empowered by Fundamental Scattering Data

    Science.gov (United States)

    Kushner, Mark J.

    2016-05-01

    Technology development increasingly relies on modeling to speed the innovation cycle. This is particularly true for systems using low temperature plasmas (LTPs) and their role in enabling energy efficient processes with minimal environmental impact. In the innovation cycle, LTP modeling supports investigation of fundamental processes that seed the cycle, optimization of newly developed technologies, and prediction of performance of unbuilt systems for new applications. Although proof-of-principle modeling may be performed for idealized systems in simple gases, technology development must address physically complex systems that use complex gas mixtures that now may be multi-phase (e.g., in contact with liquids). The variety of fundamental electron and ion scattering, and radiation transport data (FSRD) required for this modeling increases as the innovation cycle progresses, while the accuracy required of that data depends on the intended outcome. In all cases, the fidelity, depth and impact of the modeling depends on the availability of FSRD. Modeling and technology development are, in fact, empowered by the availability and robustness of FSRD. In this talk, examples of the impact of and requirements for FSRD in the innovation cycle enabled by plasma modeling will be discussed using results from multidimensional and global models. Examples of fundamental studies and technology optimization will focus on microelectronics fabrication and on optically pumped lasers. Modeling of systems as yet unbuilt will address the interaction of atmospheric pressure plasmas with liquids. Work supported by DOE Office of Fusion Energy Science and the National Science Foundation.

  9. Enhancement of pulverized coal combustion by plasma technology

    Energy Technology Data Exchange (ETDEWEB)

    Gorokhovski, M.A.; Jankoski, Z.; Lockwood, F.C.; Karpenko, E.I.; Messerle, V.E.; Ustimenko, A.B. [University of Rouen, Rouen (France)

    2007-07-01

    Plasma-assisted pulverized coal combustion is a promising technology for thermal power plants (TPP). This article reports one- and three- dimensional numerical simulations, as well as laboratory and industrial measurements of coal combustion using a plasma-fuel system (PFS). The chemical kinetic and fluid mechanics involved in this technology are analysed. The results show that a PFS, can be used to promote early ignition and enhanced stabilization of a pulverized coal flame. It is shown that this technology, in addition to enhancing the combustion efficiency of the flame, reduces harmful emissions from power coals of all ranks (brown, bituminous, anthracite and their mixtures). Data summarising the experience of 27 pulverized coal boilers in 16 thermal power plants in several countries (Russia, Kazakhstan, Korea, Ukraine, Slovakia, Mongolia and China), embracing steam productivities from 75 to 670 tons per hour (TPH), are presented. Finally, the practical computation of the characteristics of the PFS, as function of coal properties, is discussed.

  10. Introduction to the Special Issue on “State-of-the-Art Sensor Technology in Japan”

    Directory of Open Access Journals (Sweden)

    Yoshiteru Ishida

    2010-05-01

    Full Text Available The combination of sensing technology with information and communication technology (ICT could serve both as global eyes that monitor the environment for environmental issues, and as local eyes that monitor humans for aging society issues. System technology is also required to form such global and local eyes. This special issue, “State-of-the-Art Sensor Technology in Japan”, contains articles and reviews related to the monitoring of humans and the environment, and the integration of sensor systems. [...

  11. FOREWORD: 23rd National Symposium on Plasma Science & Technology (PLASMA-2008)

    Science.gov (United States)

    Das, A. K.

    2010-01-01

    The Twentieth Century has been a defining period for Plasma Science and Technology. The state of ionized matter, so named by Irving Langmuir in the early part of twentieth century, has now evolved in to a multidisciplinary area with scientists and engineers from various specializations working together to exploit the unique properties of the plasma medium. There have been great improvements in the basic understanding of plasmas as a many body system bound by complex collective Coulomb interactions of charges, atoms, molecules, free radicals and photons. Simultaneously, many advanced plasma based technologies are increasingly being implemented for industrial and societal use. The emergence of the multination collaborative project International Thermonuclear Experimental Reactor (ITER) project has provided the much needed boost to the researchers working on thermonuclear fusion plasmas. In addition, the other plasma applications like MHD converters, hydrogen generation, advanced materials (synthesis, processing and surface modification), environment (waste beneficiation, air and water pollution management), nanotechnology (synthesis, deposition and etching), light production, heating etc are actively being pursued in governmental and industrial sectors. For India, plasma science and technology has traditionally remained an important area of research. It was nearly a century earlier that the Saha ionization relation pioneered the way to interpret experimental data from a vast range of near equilibrium plasmas. Today, Indian research contributions and technology demonstration capabilities encompass thermonuclear fusion devices, nonlinear plasma phenomena, plasma accelerators, beam plasma interactions, dusty and nonneutral plasmas, industrial plasmas and plasma processing of materials, nano synthesis and structuring, astrophysical and space plasmas etc. India's participation in the ITER programme is now reflected in increased interest in the research and development

  12. EDITORIAL: Special issue featuring articles arising from the 11th High-Tech Plasma Processes Conference Special issue featuring articles arising from the 11th High-Tech Plasma Processes Conference

    Science.gov (United States)

    Bruggeman, Peter; Degrez, Gérard; Delplancke, Marie-Paule; Gleizes, Alain

    2011-05-01

    The 11th High-Tech Plasma Processes Conference (HTPP) was held in Brussels, Belgium, 27 June-2 July, 2010. HTPP started as a thermal plasma conference and gradually expanded to include low-temperature plasmas. The conference was founded by Jacques Amouroux and Pierre Fauchais, and aims to bring together different scientific communities to facilitate contacts between science, technology and industry, providing a platform for the exploration of elementary processes and applications in and by plasmas. The first HTPP was held in Odeillo, France, in 1990. Since then it has been held every other year in different European cities: Paris, Aachen, Athens, Strasbourg, Saint-Petersburg, Patras and Brussels. The 11th HTPP conference was attended by 125 participants from 19 countries. The program involved 14 invited talks, 34 contributed talks, 72 posters and a software demonstration and hands-on session for plasma modelling. The 12th HTPP conference will be held 24-28 June 2012, in Bologna, Italy. A larger part of the contributions to the 11th HTPP has been published in the Journal of Physics: Conference Series (JPCS) volume 275, 2011. All invited speakers and other contributors, as selected by the Steering, Scientific and Organizing Committee, were invited to submit a paper based on their contributions for this special issue which is peer reviewed by the journal. Both this special issue and the JPCS volume aim to bring the 11th HTPP to a wider audience. The publications are a nice example of the broad topic range of the conference. The JPCS volume contains papers covering fundamental aspects on radiative processes of thermal plasmas, modelling of thermal arcs and non-thermal RF plasma jets, plasma diagnostics including flow and heat flux measurements of thermal plasmas, radical density measurements and laser-induced breakdown spectroscopy. The applications-oriented contributions of the JPCS volume include plasma spraying, synthesis of (nano-sized) materials, surface

  13. Infertility and bioethical issues of the new reproductive technologies.

    Science.gov (United States)

    Herz, E K

    1989-03-01

    The scientific breakthroughs resulting in the delivery of Louise Brown in 1978 have opened the floodgates for an ongoing bioethical discussion about medically assisted reproduction. The majority in our society has accepted in vitro fertilization as an ethically justifiable procedure for infertile couples. The concern persists, however, that new reproductive technology has started us on the course of a slippery slope with potentially dire consequences for the so-created children, the traditional family, and, indeed, for society as a whole. The moral status of the embryo is the central issue in debates about such reproductive developments as the "spare" embryo, embryo freezing, embryo donation, embryo research and micromanipulation. Conflicts of interests between the adult's desire to become a parent and the welfare of the offspring are at the root of moral objections raised against manipulation of human reproduction. Extracorporal conception with the possibility for various gamete donors has also brought the long-practiced procedure of artificial insemination by donor and the potential consequences for the child into the discussion. Surrogate mothering and surrogate gestational mothering force us to redefine the age old dictum mater certa est and can render the child a helpless pawn in parental, emotional, and legal strife. Over the ages, society has through firmly established values exerted control over reproduction and acceptance of the new member in the community. Sex without reproduction was a severe blow to the highly regarded societal belief in parenting as the epitomy of life goals. Reproduction without sex through various technically feasible collaborative means further jolts fundamental traditional values and mandates their re-evaluation. Ethical belief systems are by nature highly charged and fiercely defended. Thus, in a pluralistic society, a consensus on the question "What ought to be done of all that can be done with new reproductive technologies?" is

  14. Convenient meat and meat products. Societal and technological issues.

    Science.gov (United States)

    Leroy, Frédéric; Degreef, Filip

    2015-11-01

    In past and contemporary foodscapes, meat and meat products have not only been following convenience trends, they have been at the heart of them. Historically, the first substantial demands for meat convenience must have been for the outsourcing of hunting or domestication, as well as slaughtering activities. In its turn, this prompted concerns for shelf-life stabilisation and the development of preservation strategies, such as meat fermentation. Demands for ease of preparation and consumption can be traced back to Antiquity but have gained in importance over the centuries, especially with the emergence of novel socio-cultural expectations and (perceived) time scarcity. Amongst other trends, this has led to the creation of ready meals and meat snacks and the expansion of urban fast food cultures. Additionally, contemporary requirements focus on the reduction of mental investments, via the "convenient" concealment of slaughtering, the optimisation of nutritional qualities, and the instant incorporation of more intangible matters, such as variety, hedonistic qualities, reassurance, and identity. An overview is given of the technological issues related to the creation of meat convenience, in its broadest sense, along with their societal implications. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. IPR and technological issues regarding a biopharmaceutical formulation hemoglobin.

    Science.gov (United States)

    Honrao, Chandrashekhar; Banerjee, Uttam C; Bansal, Parikshit

    2008-01-01

    Hemoglobin, the protein responsible for the red color of blood plays a very important part in 'life'- it transports oxygen, without which humans cannot survive. The idea of using purified Hemoglobin as a possible universal substitute for red blood cells has been around for almost a century. Hemoglobin formulations have important therapeutic applications, especially in case of trauma and war when requirements for blood may be very large. Manufacture of hemoglobin for use as a biopharmaceutical poses practical challenges, owing to dependence on human expired blood and fragility of the protein molecule. Biotechnology can play a critical role in breaking these barriers, by not only ensuring recombinant production of hemoglobin, but also enhancing stability of the molecule. The present article, based on a review of patents and available literature gives an insight into the IPR and technological issues involved in the commercial production of this 'life-saving' protein. There are more than 250 patents worldwide related to hemoglobin formulation, cross-linking and determination.

  16. Your idea and your university: issues in academic technology transfer.

    Science.gov (United States)

    Smith, Charles D

    2011-06-01

    Research discoveries may lead to products for commercial development. A central consideration for the researcher is how involved she or he will be in the commercialization process. In some cases, a university out-licenses the intellectual property, whereas in other cases, the investigator may want to be involved in the development process and choose to start his or her own company to develop and possibly to manufacture and sell the product. Before undertaking such a challenge, however, the investigator-turned-entrepreneur must consider a variety of issues, including career goals, financial and time commitments, potential conflicts of interest and/or commitment, start-up funding, and his or her ability to run a company or step aside to allow business experts to make necessary decisions. This paper discusses some personal considerations in deciding to start a spinout company and provides information on some of the available government grants to assist you should you decide to undertake your product's commercial development. In particular, the Small Business Innovative Research and Small Business Technology Transfer programs of federal funding agencies often are the source of early funding for new biomedical companies.

  17. Beryllium processing technology review for applications in plasma-facing components

    Energy Technology Data Exchange (ETDEWEB)

    Castro, R.G.; Jacobson, L.A.; Stanek, P.W.

    1993-07-01

    Materials research and development activities for the International Thermonuclear Experimental Reactor (ITER), i.e., the next generation fusion reactor, are investigating beryllium as the first-wall containment material for the reactor. Important in the selection of beryllium is the ability to process, fabricate and repair beryllium first-wall components using existing technologies. Two issues that will need to be addressed during the engineering design activity will be the bonding of beryllium tiles in high-heat-flux areas of the reactor, and the in situ repair of damaged beryllium tiles. The following review summarizes the current technology associated with welding and joining of beryllium to itself and other materials, and the state-of-the-art in plasma-spray technology as an in situ repair technique for damaged beryllium tiles. In addition, a review of the current status of beryllium technology in the former Soviet Union is also included.

  18. Magnetic Fusion Energy Plasma Interactive and High Heat Flux Components: Volume 5, Technical assessment of critical issues in the steady state operation of fusion confinement devices

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    Critical issues for the steady state operation of plasma confinement devices exist in both the physics and technology fields of fusion research. Due to the wide range and number of these issues, this technical assessment has focused on the crucial issues associated with the plasma physics and the plasma interactive components. The document provides information on the problem areas that affect the design and operation of a steady state ETR or ITER type confinement device. It discusses both tokamaks and alternative concepts, and provides a survey of existing and planned confinement machines and laboratory facilities that can address the identified issues. A universal definition of steady state operation is difficult to obtain. From a physics point of view, steady state is generally achieved when the time derivatives approach zero and the operation time greatly exceeds the characteristic time constants of the device. Steady state operation for materials depends on whether thermal stress, creep, fatigue, radiation damage, or power removal are being discussed. For erosion issues, the fluence and availability of the machine for continuous operation are important, assuming that transient events such as disruptions do not limit the component lifetimes. The panel suggests, in general terms, that steady state requires plasma operation from 100 to 1000 seconds and an availability of more than a few percent, which is similar to the expectations for an ETR type device. The assessment of critical issues for steady state operation is divided into four sections: physics issues; technology issues; issues in alternative concepts; and devices and laboratory facilities that can address these problems.

  19. Survey report of FY 1997 on the application of plasma to advanced environmentally acceptable technologies. 2; 1997 nendo chosa hokokusho (kankyo chowagata gijutsu no kodoka eno plasma no oyo ni kansuru chosa). 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report describes the latest technological trend of plasma which will be useful for a better global environment. Novel application field of plasma technology has been studied in detail. A definite research plan for a better global environment has been proposed. At first, current global environmental issues are reviewed, and the background and the purpose of present investigation are described. Then, are described the plasma generation, measurement and control technology, and the application of plasma technology for a chemical reaction, especially, the promising chemical reaction with highly sensitive and/or highly selective process. In addition, is reviewed the development of a multi-functional membrane using energy control technology of plasma particles, and an advanced catalyst made by plasma-based technology. Is also described the application of plasma to the fixation of CO2 and reuse of greenhouse gases such as CO2 and CH4. Are described the results of the study on capture and reuse of environmental pollutants. The contribution of plasma technology to the production process with low environmental load is provided. Finally, a research plan for plasma technology aiming at a better global environment is proposed on the basis of present investigation. 138 refs., 113 figs., 15 tabs.

  20. Treatment of textile surfaces by plasma technology for biomedical applications

    OpenAIRE

    Labay, Cédric

    2014-01-01

    Medical applications of technical textiles are an expanding field of research. One of the added values of these new materials would be that they were suitable to contain and release active compounds in a controlled and sustained manner. Drug incorporation and release from synthetic fibers is related to the interaction of the drug with the polymer and probably greatly depends on the surface chemistry of the fiber. Plasma technology is a tool that enables to modify physical and chemical prop...

  1. The technology of Plasma Spray Physical Vapour Deposition

    Directory of Open Access Journals (Sweden)

    M. Góral

    2012-12-01

    Full Text Available Purpose: The deposition of thermal barrier coatings is currently the most effective means of protecting the surface of aircraft engine turbine blades from the impact of aggressive environment of combustion gases. The new technologies of TBC depositions are required.Design/methodology/approach: The essential properties of the PS-PVD process have been outlined, as well as recent literature references. In addition, the influence of a set process condition on the properties of the deposited coatings has been described.Findings: The new plasma-spraying PS-PVD method is a promising technology for the deposition of modern thermal barrier coatings on aircraft engine turbine blades.Research limitations/implications: The constant progress of engine operating temperatures and increasing pollution restrictions determine the intensive development of heat-resistant coatings, which is directed to new deposition technologies and coating materials.Practical implications: The article presents a new technology of thermal barrier coating deposition - LPPS Thin Film and Plasma Spray - Physical Vapour Deposition.Originality/value: The completely new technologies was described in article.

  2. The Main Issues to Address in Modeling Plasma Spray Torch Operation

    Science.gov (United States)

    Chazelas, C.; Trelles, J. P.; Vardelle, A.

    2017-01-01

    The modeling of plasma torch operation has advanced greatly in the last 15 years due to a better understanding of the underlying physics, development of commercial, open-source computational fluid dynamics softwares, and access to high performance and cloud computing. However, the operation mode of the electric arc in plasma torches is controlled by dynamic, thermal, electromagnetic, acoustic and chemical phenomena that take place at different scales and whose interactions are not completely understood yet. Even though no single model of plasma torch operation fully addresses these phenomena, most of these models are useful tools for parametric studies, if their use is reinforced by knowledge of torch operation and the model predictions are validated against experimental data. To increase the level of predictability of the current models, several further steps are needed. This study examines the issues remaining to be addressed in the modeling of plasma spray torch operation and the current critical aspects of these.

  3. Science Technology Society Simulations: Engaging Students with Issues-based Scenarios.

    Science.gov (United States)

    Bodzin, Alec M.; Mamlok, Rachel

    2000-01-01

    Describes Science Technology and Society (STS) simulations that teach students about human experiences involving controversial issues. When students are taught using controversial and authentic issues, science instruction becomes current and engaging. (SAH)

  4. Regulatory framework in assisted reproductive technologies, relevance and main issues.

    Directory of Open Access Journals (Sweden)

    Françoise Merlet

    2010-01-01

    Full Text Available Assisted reproductive technologies (ART have changed life for the past 25 years and many ethical and social issues have emerged following this new method of conception. In order to protect individuals against scientific and ethical abuses without inhibiting scientific progress, a specific legal framework is necessary. The first French law on Bioethics was voted after an extensive debate in 1994 then reviewed in 2004. This review previously scheduled every five years is currently being discussed. Legal provisions applying to ART are part of a large framework including the protection of the patients' rights and biomedical research. The key principles consist of respect for human life and ban on commercial practices of human body parts, eugenic practices and any kind of cloning. These key principles apply to ART. Donation is anonymous and free. Created in 2004, the Agence de la biomĂŠdecine is a government agency and one of the main tools of the French regulations. The missions focus on improving the quality and the safety of the management of ART. Evaluation of activities is available to all from the annual report. The agency represents the French competent authority for medical and scientific aspects of ART. Substantial differences in European legislations exist from the open-up "laissez faire" to the most restrictive one. As a consequence a large reproductive tourism has developed particularly for egg donation or surrogacy. The medical and ethical conditions of management of patients and donors represent the main critical points. In order to avoid ethical abuses, homogenization regarding the key principles is necessary in Europe. It is an opportunity to reassert that human body parts should not be a source of financial gain.

  5. Regulatory framework in assisted reproductive technologies, relevance and main issues.

    Science.gov (United States)

    Merlet, Françoise

    2009-01-01

    Assisted reproductive technologies (ART) have changed life for the past 25 years and many ethical and social issues have emerged following this new method of conception. In order to protect individuals against scientific and ethical abuses without inhibiting scientific progress, a specific legal framework is necessary. The first French law on Bioethics was voted after an extensive debate in 1994 then reviewed in 2004. This review previously scheduled every five years is currently being discussed. Legal provisions applying to ART are part of a large framework including the protection of the patients' rights and biomedical research. The key principles consist of respect for human life and ban on commercial practices of human body parts, eugenic practices and any kind of cloning. These key principles apply to ART. Donation is anonymous and free. Created in 2004, the Agence de la biomédecine is a government agency and one of the main tools of the French regulations. The missions focus on improving the quality and the safety of the management of ART. Evaluation of activities is available to all from the annual report. The agency represents the French competent authority for medical and scientific aspects of ART. Substantial differences in European legislations exist from the open-up "laissez faire" to the most restrictive one. As a consequence a large reproductive tourism has developed particularly for egg donation or surrogacy. The medical and ethical conditions of management of patients and donors represent the main critical points. In order to avoid ethical abuses, homogenization regarding the key principles is necessary in Europe. It is an opportunity to reassert that human body parts should not be a source of financial gain.

  6. Cultural and Technological Issues and Solutions for Geodynamics Software Citation

    Science.gov (United States)

    Heien, E. M.; Hwang, L.; Fish, A. E.; Smith, M.; Dumit, J.; Kellogg, L. H.

    2014-12-01

    Computational software and custom-written codes play a key role in scientific research and teaching, providing tools to perform data analysis and forward modeling through numerical computation. However, development of these codes is often hampered by the fact that there is no well-defined way for the authors to receive credit or professional recognition for their work through the standard methods of scientific publication and subsequent citation of the work. This in turn may discourage researchers from publishing their codes or making them easier for other scientists to use. We investigate the issues involved in citing software in a scientific context, and introduce features that should be components of a citation infrastructure, particularly oriented towards the codes and scientific culture in the area of geodynamics research. The codes used in geodynamics are primarily specialized numerical modeling codes for continuum mechanics problems; they may be developed by individual researchers, teams of researchers, geophysicists in collaboration with computational scientists and applied mathematicians, or by coordinated community efforts such as the Computational Infrastructure for Geodynamics. Some but not all geodynamics codes are open-source. These characteristics are common to many areas of geophysical software development and use. We provide background on the problem of software citation and discuss some of the barriers preventing adoption of such citations, including social/cultural barriers, insufficient technological support infrastructure, and an overall lack of agreement about what a software citation should consist of. We suggest solutions in an initial effort to create a system to support citation of software and promotion of scientific software development.

  7. Information technology strategy and alignment issues in health care organizations.

    Science.gov (United States)

    Iveroth, Einar; Fryk, Pontus; Rapp, Birger

    2013-01-01

    Information technology (IT) plays a key role in public health care management because it could improve quality, efficiency, and patient care. Researchers and practitioners repeatedly contend that a health care organization's information systems strategy should be aligned with its objectives and strategies, a notion commonly known as IT alignment. Actor-related IT alignment issues in health care institutions were explored in this study. More specifically, it explores the possibility of moving beyond the current IT alignment perspective and, in so doing, explores whether IT alignment-as currently conceptualized in the dominant body of research-is sufficient for attaining improved quality, efficiency, and patient care in health care organizations. The findings are based on a qualitative and longitudinal study of six health care organizations in the Stockholm metropolitan area. The empirical data were gathered over the 2005-2011 period from interviews, a focus group, observations, and archival material. The data suggest recurrent misalignments between IT strategy and organizational strategy and operations due to the failure to deconstruct the IT artifact and to the existence of various levels of IT maturity. A more complex picture of IT alignment in health care that goes beyond the current perspective is being offered by this study. It argues that the previously common way of handling IT as a single artifact and applying one IT strategy to the entire organizational system is obsolete. MANAGERIAL IMPLICATIONS: The article suggests that considerable benefits can be gained by assessing IT maturity and its impact on IT alignment. The article also shows that there are different kinds of IT in medical care that requires diverse decisions, investments, prioritizations, and implementation approaches.

  8. ORAL ISSUE OF THE JOURNAL "USPEKHI FIZICHESKIKH NAUK": Modeling of gas discharge plasma

    Science.gov (United States)

    Smirnov, Boris M.

    2009-06-01

    The condition for the self-maintenance of a gas discharge plasma (GDP) is derived from its ionization balance expressed in the Townsend form and may be used as a definition of a gas discharge plasma in its simplest form. The simple example of a gas discharge plasma in the positive column of a cylindrical discharge tube allows demonstrating a wide variety of possible GDP regimes, revealing a contradiction between simple models used to explain gas discharge regimes and the large number of real processes responsible for the self-maintenance of GDP. The variety of GDP processes also results in a stepwise change of plasma parameters and developing some instabilities as the voltage or discharge current is varied. As a consequence, new forms and new applications of gas discharge arise as technology progresses.

  9. Developing Skills for Technological Change: Some Policy Issues.

    Science.gov (United States)

    Alfthan, Torkel

    1985-01-01

    The effects of technological change on jobs and the implications for training policies are discussed here in the context of the manufacturing sector. Discusses the impact of new technologies on skills and qualifications of managers, technicians, and skilled workers. (CT)

  10. Innovation in surgical technology and techniques: Challenges and ethical issues.

    Science.gov (United States)

    Geiger, James D; Hirschl, Ronald B

    2015-06-01

    The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation.

  11. Keeping It Current: Using Technology to Teach about Social Issues

    Science.gov (United States)

    Sardone, Nancy B.; Devlin-Scherer, Roberta

    2010-01-01

    In thinking about teaching nonfiction, the authors acknowledge that many contemporary and important nonfiction texts that students should be encouraged to read take up social issues that are not easy to talk about or even to think about. They discovered that combining well-chosen nonfiction on social issues with specialized digital games and other…

  12. Implementation Costs for Educational Technology Systems. Issue Trak: A CEFPI Brief on Educational Facility Issues.

    Science.gov (United States)

    Meeks, Glenn E.; Fisher, Ricki; Loveless, Warren

    Personnel involved in planning or developing schools lack the costing tools that will enable them to determine educational technology costs. This report presents an overview of the technology costing process and the general costs used in estimating educational technology systems on a macro-budget basis, along with simple cost estimates for…

  13. Suspensions Plasma Spraying of Ceramics with Hybrid Water-Stabilized Plasma Technology

    Science.gov (United States)

    Musalek, Radek; Medricky, Jan; Tesar, Tomas; Kotlan, Jiri; Pala, Zdenek; Lukac, Frantisek; Chraska, Tomas; Curry, Nicholas

    2016-12-01

    Technology of water-stabilized plasma torch was recently substantially updated through introduction of a so-called hybrid concept that combines benefits of water stabilization and gas stabilization principles. The high-enthalpy plasma provided by the WSP-H ("hybrid") torch may be used for thermal spraying of powders as well as liquid feedstocks with high feed rates. In this study, results from three selected experiments with suspension plasma spraying with WSP-H technology are presented. Possibility of deposition of coatings with controlled microstructures was demonstrated for three different ceramics (YSZ—yttria-stabilized zirconia, YAG—yttrium aluminum garnet and Al2O3) introduced into ethanol-based suspensions. Shadowgraphy was used for optimization of suspension injection and visualization of the liquid fragmentation in the plasma jet. Coatings were deposited onto substrates attached to the rotating carousel with integrated temperature monitoring and air cooling, which provided an excellent reproducibility of the deposition process. Deposition of columnar-like YSZ and dense YAG and Al2O3 coatings was successfully achieved. Deposition efficiency reached more than 50%, as evaluated according to EN ISO 17 836 standard.

  14. Auto-disable syringes for immunization: issues in technology transfer.

    Science.gov (United States)

    Lloyd, J S; Milstien, J B

    1999-01-01

    WHO and its partners recommend the use of auto-disable syringes, "bundled" with the supply of vaccines when donor dollars are used, in all mass immunization campaigns, and also strongly advocate their use in routine immunization programmes. Because of the relatively high price of auto-disable syringes, WHO's Technical Network for Logistics in Health recommends that activities be initiated to encourage the transfer of production technology for these syringes as a means of promoting their use and enhancing access to the technology. The present article examines factors influencing technology transfer, including feasibility, corporate interest, cost, quality assurance, intellectual property considerations, and probable time frames for implementation. Technology transfer activities are likely to be complex and difficult, and may not result in lower prices for syringes. Guidelines are offered on technology transfer initiatives for auto-disable syringes to ensure the quality of the product, the reliability of the supply, and the feasibility of the technology transfer activity itself.

  15. Forecasting and Technology Management: Statistical Theory and Methodological Issues

    DEFF Research Database (Denmark)

    Madsen, Henning

    technology. The conclusion is that widespread awareness of the growing force of technology and increasing concern over its impact means that forecasting of technological development and consequences is absolutely essential in many managerial decision situations. Examples cover e.g. identification...... of directions and targets for a R and D project, monitoring of a given area by a public agency, and evaluation of the future competitive situation for a company. This paper gives a brief introduction to the field of technological forecasting especially in relation to the strategic planning process...... as the essential phase where decisions concerning introduction of new technology are taken in companies. It includes as well a description of the problems related to the marketing area and of methods applicable in practising technological forecasting....

  16. Eco Issues in Bulk Materials Handling Technologies in Ports

    Directory of Open Access Journals (Sweden)

    Nenad Zrnić

    2011-09-01

    Full Text Available This paper deals with eco issues in bulk materials handling in ports. Solid, free-flowing materials are said to be in bulk. Bulk materials handling is very difficult, because it incorporates all the features of liquids, gasses and mass solids. Energy efficiency, dust emissions in nearby environment, dust explosions, jamming, noise, handling of hazardous materials and protection of materials from contamination are issues that will be considered in this paper. Here are also presented possible solutions for some of these issues

  17. Treatment of Bone Waste Using Thermal Plasma Technology

    Institute of Scientific and Technical Information of China (English)

    KI Ho Beom; KIM Woo Hyung; KIM Bong Soo; K00 Hyung Joon; LI Mingwei; CHAE Jae Ou

    2007-01-01

    Daily meat consumption produces a lot of bone waste, and dumped bone waste without treatment would result in environmental hazards. Conventional treatment methods of waste bones have some disadvantages. Herein, an investigation of bone waste treated using thermal plasma technology is presented. A high-temperature plasma torch operated at 25.2 kW was used to treat bone waste for seven minutes. The bone waste was finally changed into vitric matter and lost 2/3 of its weight after the treatment. The process was highly efficient, economical, convenient, and fuel-free. This method could be used as an alternative for disposal of bone waste, small infectious animals, hazardous hospital waste, etc.

  18. Information and Communication Technology: Gender Issues in Developing Nations

    Directory of Open Access Journals (Sweden)

    Kimberly Betz Leahy

    2003-01-01

    Full Text Available As Developing Nations seek to leverage scarce resources toward the goal of achieving a developed status they must reevaluate past practices and explore available and affordable technologies. Where in-formation and communication infrastructures are weak, use of low-cost, easily distributed technologies have proven effective. Still, many developing nations have failed to incorporate a resource in great abundance, their women, to use these new technologies to greatest advantage. This paper will address the implications of women's lack of economic and educational parity, and offer examples of how the education of women through the use of information and communication technology can enhance a nation's gross domestic product (GDP.

  19. Ethical Issues Associated with Information and Communication Technology in Counseling and Guidance

    Science.gov (United States)

    Sampson, James P., Jr.; Makela, Julia Panke

    2014-01-01

    For more than 50 years, literature on the use of information and communication technology in counseling and guidance has presented ethical issues related to the development and use of technologies in practice. This paper reviews the ethical issues raised, organizing them into three categories: Social equity, resources, and services. Career…

  20. Ethical Issues Associated with Information and Communication Technology in Counseling and Guidance

    Science.gov (United States)

    Sampson, James P., Jr.; Makela, Julia Panke

    2014-01-01

    For more than 50 years, literature on the use of information and communication technology in counseling and guidance has presented ethical issues related to the development and use of technologies in practice. This paper reviews the ethical issues raised, organizing them into three categories: Social equity, resources, and services. Career…

  1. Social Technologies for Online Learning: Theoretical and Contextual Issues

    Science.gov (United States)

    Kear, Karen; Jones, Allan; Holden, Georgina; Curcher, Mark

    2016-01-01

    Three exemplars are presented of social technologies deployed in educational contexts: wikis; a photo-sharing environment; and a social bookmarking tool. Students were found to engage with the technologies selectively, sometimes rejecting them, in the light of their prior conceptions of education. Some students (a minority in all the studies) were…

  2. Technology integration issues in a special education school in Turkey

    Directory of Open Access Journals (Sweden)

    Umit Girgin

    2011-03-01

    Full Text Available Technological advances make life easier for many students with disabilities. However, when technology isdiscussed in regard to the persons with disabilities, it usually concerns assistive technology such as hearing aids. Infact, in many contexts, information and communications technology (ICT integration can be more critical thanassistive technologies. This study was conducted in a unique school in Turkey established for children with hearingimpairment. The school uses the oral-communicative approach, emphasizing the use of hearing aids; however, thepotential for educational applications of ICT still needs further study. A research study was undertaken to establishthe opportunities for ICT integration in the classroom. The teachers were asked to complete a questionnaire on theICT integration for the school in order to establish their attitudes towards and uses of ICT in this context

  3. NON-TECHNOLOGICAL INNOVATION: CURRENT ISSUES AND PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    Cristina Saraiva Pereira

    2013-06-01

    Full Text Available ABSTRACTInnovationcan be considered to be a complex phenomenon including technical andnon-technical aspects. A remarkable increase in the interdisciplinary attention devoted to innovation has been noticed over the recent decades but the formal technological and economic aspects of innovation have received much more attention and have been taken into account in a far greater number of analyses, despite the great importance of the non-technological dimension of innovation.This paper attempts a review on the important subject of non-technological innovation. The main ideas on the non-technological dimension of innovation research will be highlighted, followed by an attempt to integrate diverse and disparate perspectives on the subject, to present evidence on possible generalizations and to discuss eventual research gaps and opportunities for further studies. The relationship between technological and non-technological innovation is complex and not fully understood. Among several aspects that will be covered in this paper, two specific ones will receive special attention in this brief analysis: the evidence on the impacts of non-technological innovation, and the measurements efforts that have been made concerning this phenomenon.

  4. Long-term proliferation and safeguards issues in future technologies

    Energy Technology Data Exchange (ETDEWEB)

    Keisch, B.; Auerbach, C.; Fainberg, A.; Fiarman, S.; Fishbone, L.G.; Higinbotham, W.A.; Lemley, J.R.; O' Brien, J.

    1986-02-01

    The purpose of the task was to assess the effect of potential new technologies, nuclear and non-nuclear, on safeguards needs and non-proliferation policies, and to explore possible solutions to some of the problems envisaged. Eight subdivisions were considered: New Enrichment Technologies; Non-Aqueous Reprocessing Technologies; Fusion; Accelerator-Driven Reactor Systems; New Reactor Types; Heavy Water and Deuterium; Long-Term Storage of Spent Fuel; and Other Future Technologies (Non-Nuclear). For each of these subdivisions, a careful review of the current world-wide effort in the field provided a means of subjectively estimating the viability and qualitative probability of fruition of promising technologies. Technologies for which safeguards and non-proliferation requirements have been thoroughly considered by others were not restudied here (e.g., the Fast Breeder Reactor). The time scale considered was 5 to 40 years for possible initial demonstration although, in some cases, a somewhat optimistic viewpoint was embraced. Conventional nuclear-material safeguards are only part of the overall non-proliferation regime. Other aspects are international agreements, export controls on sensitive technologies, classification of information, intelligence gathering, and diplomatic initiatives. The focus here is on safeguards, export controls, and classification.

  5. The issue: Innovation, information technology and climate change

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-01-06

    This position paper by the Information Technology Association of Canada (ITAC) outlines the information technology community's position vis-a-vis the Federal Government's 'Climate Change Plan for Canada'. In general, the ITAC is in favour of the Government's plan, however, it asserts that the Plan falls short by not acknowledging the significant contributions that present and emerging information and communications technologies can make to the achievements of Canadian climate change goals. In this regard the paper draws attention to, and explains the significance of the actual and potential contributions made to climate change efforts by teleconferencing, video-conferencing, telecommuting, electronic commerce, and smart buildings technologies. 4 refs.

  6. Science and technology review, July-August 1998 issue

    Energy Technology Data Exchange (ETDEWEB)

    Smart, J

    1998-07-01

    On the occasion of Edward Teller's 90th birthday, S&TR has the pleasure of honoring Lawrence Livermore's co-founder and most influential scientist. Teller is known for his inventive work in physics, his concepts leading to thermonuclear explosions, and his strong stands on such issues as science education, the nation's strategic defense, the needs for science in the future, and sharing scientific information. The articles in this issue also show him, as always, tirelessly moving forward with his new and changing interests.

  7. special issue: Technology transfer in United States universities

    OpenAIRE

    Ann-Charlotte Fridh; Bo Carlsson

    2002-01-01

    This paper examines the role of offices of technology transfer (OTT) in 12 U.S. universities in 1998 in commercializing research results in the form of patents, licenses, and start-ups of new companies. We study the organization and place of OTTs within the university structure, the process of technology transfer, and the staffing and funding of the office. Data were collected through a mail questionnaire followed up through telephone interviews. We also conducted a statistical analysis of da...

  8. Forecasting and Technology Management: Statistical Theory and Methodological Issues

    DEFF Research Database (Denmark)

    Madsen, Henning

    The degree of development in the technical capability of many new devices and materials over their predecessors often is in multiples of improvement. These gains in performance are so great that they abruptly and drastically alter the means, effects, time, or costs of doing things. Thus, they dis......The degree of development in the technical capability of many new devices and materials over their predecessors often is in multiples of improvement. These gains in performance are so great that they abruptly and drastically alter the means, effects, time, or costs of doing things. Thus...... technology. The conclusion is that widespread awareness of the growing force of technology and increasing concern over its impact means that forecasting of technological development and consequences is absolutely essential in many managerial decision situations. Examples cover e.g. identification...

  9. Progress and issues in polycrystalline thin-film PV technologies

    Energy Technology Data Exchange (ETDEWEB)

    Zweibel, K.; Ullal, H.S.; Roedern, B. von [National Renewable Energy Lab., Golden, CO (United States)

    1996-05-01

    Substantial progress has occurred in polycrystalline thin-film photovoltaic technologies in the past 18 months. However, the transition to first-time manufacturing is still under way, and technical problems continue. This paper focuses on the promise and the problems of the copper indium diselenide and cadmium telluride technologies, with an emphasis on continued R&D needs for the near-term transition to manufacturing and for next-generation improvements. In addition, it highlights the joint R&D efforts being performed in the U.S. Department of Energy/National Renewable Energy Laboratory Thin-Film Photovoltaic Partnership Program.

  10. Information systems outsourcing issues in the communication technology sector

    CSIR Research Space (South Africa)

    Smuts, H

    2010-03-01

    Full Text Available (CT) sector in South Africa through a survey among organisations in this sector. The survey results are compared to findings in similar studies in other markets and unique contributors to IS outsourcing issues in the South African context..., knowledge and capabilities found outside its bounds (Power et al., 2006, Edersheim, 2007). Outsourcing as a business practice is flourishing in almost every domain and organisations are outsourcing functional areas such as information systems, marketing...

  11. Technology and human issues in reusing learning objects

    NARCIS (Netherlands)

    Collis, Betty; Strijker, Allard

    2004-01-01

    Reusing learning objects is as old as retelling a story or making use of libraries and textbooks, and in electronic form has received an enormous new impetus because of the World Wide Web and Web technologies. Are we at the brink of changing the "shape and form of learning, ... of being able to trul

  12. Key Issue: Recruiting Science, Technology, Engineering, and Mathematics (STEM) Teachers

    Science.gov (United States)

    McGraner, Kristin L.

    2009-01-01

    A STEM teacher is one who teaches in the fields of science, technology, engineering, and mathematics. In K-12 schooling, most STEM teachers instruct mathematics and science classes, which continue to be critical shortage areas. As part of a comprehensive human capital strategy, designing recruitment initiatives to attract qualified STEM teachers…

  13. Technology and Human Issues in Reusing Learning Objects.

    NARCIS (Netherlands)

    Collis, Betty; Strijker, Allard

    2004-01-01

    Reusing learning objects is as old as retelling a story or making use of libraries and textbooks, and in electronic form has received an enormous new impetus because of the World Wide Web and Web technologies. Are we at the brink of changing the "shape and form of learning, ... of being able to trul

  14. Data Protection Issues in Higher Education with Technological Advancements

    Science.gov (United States)

    McKelvey, Nigel

    2014-01-01

    Adhering to laws whilst working or studying in an educational establishment is often fraught with challenges. The Irish Data Protection Act 1988 (Amendment 2003) strives to protect the individual where their personal data is potentially being abused. The advancements in technologies have facilitated educational establishments by improving…

  15. Integrating Technology in a Geometry Classroom: Issues for Teaching.

    Science.gov (United States)

    Pokay, Patricia A.; Tayeh, Carla

    1997-01-01

    Based on a college-level geometry course, presents practical suggestions for integrating exploratory computer applications into the mathematics classroom. Reveals that students need more experimental time with technology to reduce anxiety, and assessments need to be developed and implemented to tap the outcomes of problem solving and higher level…

  16. Women and Information Technology: Framing Some Issues for Education.

    Science.gov (United States)

    Damarin, Suzanne K.

    1992-01-01

    Discusses relationships among technology, women, and education. Presents three views of the computer's future: (1) the robot as superior human; (2) the cyborg; and (3) the human-computer dyad. Discusses effects that the computer has had upon work and school, particularly for women and at risk and nonliterate students. (SG)

  17. Special issue editorial - Plasma interactions with Solar System Objects: Anticipating Rosetta, Maven and Mars Orbiter Mission

    Science.gov (United States)

    Coates, A. J.; Wellbrock, A.; Yamauchi, M.

    2015-12-01

    Within our solar system, the planets, moons, comets and asteroids all have plasma interactions. The interaction depends on the nature of the object, particularly the presence of an atmosphere and a magnetic field. Even the size of the object matters through the finite gyroradius effect and the scale height of cold ions of exospheric origin. It also depends on the upstream conditions, including position within the solar wind or the presence within a planetary magnetosphere. Soon after ESA's Rosetta reached comet Churyumov-Gerasimenko, NASA's Maven and ISRO's Mars Orbiter Mission (MOM) reached Mars, and ESA's Venus Express mission was completed, this issue explores our understanding of plasma interactions with comets, Mars, Venus, and moons in the solar system. We explore the processes which characterise the interactions, such as ion pickup and field draping, and their effects such as plasma escape. Papers are based on data from current and recent space missions, modelling and theory, as we explore our local part of the 'plasma universe'.

  18. MIIT Issued Industrial Key Generic Technology Development Guidelines (2011)

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    In order to make full use of social resources, guide conducts of market subject, lead the developing direction of industrial key generic technology, promote industrial technology advance and realize transformation, upgrading and structural optimization of industry and communications industry, on July 1, the Ministry of Industry and Information Technology (MIIT) issued Industrial Key Generic Technology Development Guidelines (2011) (Gong Xin Bu Ke [2011] No.320),

  19. Assistive Technologies and Issues Relating to Privacy, Ethics and Security

    Science.gov (United States)

    Martin, Suzanne; Bengtsson, Johan E.; Dröes, Rose-Marie

    Emerging technologies provide the opportunity to develop innovative sustainable service models, capable of supporting adults with dementia at home. Devices range from simple stand-alone components that can generate a responsive alarm call to complex interoperable systems that even can be remotely controlled. From these complex systems the paradigm of the ubiquitous or ambient smart home has emerged, integrating technology, environmental design and traditional care provision. The service context is often complex, involving a variety of stakeholders and a range of interested agencies. Against this backdrop, as anecdotal evidence and government policies spawn further innovation it is critical that due consideration is given to the potential ethical ramifications at an individual, organisational and societal level. Well-grounded ethical thinking and proactive ethical responses to this innovation are required. Explicit policy and practice should therefore emerge which engenders confidence in existing supported living option schemes for adults with dementia and informs further innovation.

  20. Technology and the issue of cost/benefit in diabetes.

    Science.gov (United States)

    Giannini, Cosimo; Mohn, Angelika; Chiarelli, Francesco

    2009-09-01

    Diabetes mellitus is the most common endocrine disease in childhood and adolescence. Type 1 diabetes accounts for over 90% of diabetes in children. During the past decades, epidemiological studies have clearly shown a worldwide increase in the incidence of both type 1 and type 2 diabetes in many countries. The worldwide incidence of diabetes and especially the diabetes-related complications highlight the relevant economic burden of this disease. In fact, its costs affect health services, national productivity as well as individuals and families. Hospital in-patient costs for the treatment of complications are the largest single contributor to direct healthcare costs. Anyway, many of these complications and, therefore, their costs, as well as most of the indirect costs, are partially or completely preventable. In fact, intensive therapy, directed at controlling blood glucose, blood pressure and lipid levels, has been shown to be cost effective in that, although initial costs are high, longer term costs decrease as a result of delayed or prevented complications. From this point of view, technological advances have provided new therapeutic options to achieve metabolic control as close to normal as possible in children and adolescents with diabetes. In fact, the relevant technological devices that have been adopted till now, if adequately utilized, should allow patients to achieve intensive management with improved metabolic control, quality of life as well as reduced mortality and morbidity. However, new technologies are not a panacea, and the benefit they provide can be completely achieved only if adequately and especially individually determined. Furthermore, it is inevitable that new modalities of treatment for people with diabetes will be considered critically by healthcare planners and providers in the prevailing global environment of increasing costs of medical care and pressure for rational allocation of resources. Therefore, new technologically derived devices

  1. Ethical and social issues of embryonic stem cell technology.

    Science.gov (United States)

    Cregan, K

    2005-02-01

    Therapeutic cloning is debated as a cure for a host of diseases in the developed world. The likely source for the materials for therapeutic cloning, human ova, would be poor women and women from the developing world. The ethics and potential social consequences inherent in this technology are fraught and encourage the com modification and abstraction of one of the fundamental conditions of human life.

  2. Collider design issues based on proton-driven plasma wakefield acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Xia, G., E-mail: guoxing.xia@manchester.ac.uk [School of Physics and Astronomy, University of Manchester, Manchester (United Kingdom); The Cockcroft Institute, Sci-Tech Daresbury, Daresbury, Warrington (United Kingdom); Mete, O. [School of Physics and Astronomy, University of Manchester, Manchester (United Kingdom); The Cockcroft Institute, Sci-Tech Daresbury, Daresbury, Warrington (United Kingdom); Aimidula, A.; Welsch, C.P. [The Cockcroft Institute, Sci-Tech Daresbury, Daresbury, Warrington (United Kingdom); The University of Liverpool, Liverpool (United Kingdom); Chattopadhyay, S. [School of Physics and Astronomy, University of Manchester, Manchester (United Kingdom); The Cockcroft Institute, Sci-Tech Daresbury, Daresbury, Warrington (United Kingdom); The University of Liverpool, Liverpool (United Kingdom); Mandry, S. [Department of Physics and Astronomy, University College London, London (United Kingdom); Wing, M. [Department of Physics and Astronomy, University College London, London (United Kingdom); Deutsche Elektronen-Synchrotron DESY, Hamburg (Germany)

    2014-03-11

    Recent simulations have shown that a high-energy proton bunch can excite strong plasma wakefields and accelerate a bunch of electrons to the energy frontier in a single stage of acceleration. It therefore paves the way towards a compact future collider design using the proton beams from existing high-energy proton machines, e.g. Tevatron or the LHC. This paper addresses some key issues in designing a compact electron–positron linear collider and an electron–proton collider based on the existing CERN accelerator infrastructure.

  3. Collider design issues based on proton-driven plasma wakefield acceleration

    CERN Document Server

    Xia, G; Aimidula, A; Welsch, C; Chattopadhyay, S; Mandry, S; Wing, M

    2014-01-01

    Recent simulations have shown that a high-energy proton bunch can excite strong plasma wakefields and accelerate a bunch of electrons to the energy frontier in a single stage of acceleration. It therefore paves the way towards a compact future collider design using the proton beams from existing high-energy proton machines, e.g. Tevatron or the LHC. This paper addresses some key issues in designing a compact electron-positron linear collider and an electron-proton collider based on existing CERN accelerator infrastructure.

  4. Treatment of RW by Plasma technology; Tratamiento de RBMA mediante tecnologia Plasma

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Perales, J. J.; Diaz Prada, J. I.; Alvarez Mir, F.

    2003-07-01

    Vitrification of low and intermediate level wastes based on plasma technology allows the destruction of organic components by pyrolisys or gasification and the incorporation of the inorganic components into a melted glass in the bottom of the reactor. The new product are obtained with a significant volume reduction compared with the one of original wastes, assuring emissions below authorized limits; Final volume reduction of wastes involves a radiological exposure reduction and, consequently involves an radiological protection improvement. As a result of the several test developed at the different phases of the project, it has been able the optimization of the equipment and to reduce emissions from a chemical or radiological point of view, always, fulfilling the current legislation. This process is an alternative method to reduce the volume of wastes to be disposed, improving the waste management and reducing the operator radioactive exposures. This article describes a plasma torch plant project, it's different stages, innovation features and advantages of this technology to treat radioactive wastes. (Author)

  5. Microplasmas, a platform technology for a plethora of plasma applications

    Science.gov (United States)

    Becker, Kurt

    2017-08-01

    Publications describing microplasmas, which are commonly defined as plasmas with at least one dimension in the submillimeter range, began to appear to the scientific literature about 20 years ago. As discussed in a recent review by Schoenbach and Becker [1], interest and activities in basic microplasma research as well as in the use of microplasma for a variety of application has increased significatly over the past 20 years. The number of papers devoted to basic microplasma science increased by an order of magnitude between 1995 and 2015, a count that excludes publications dealing exclusively with technological applications of microplasmas, where the microplasma is used solely as a tool. In reference [1], the authors limited the topical coverage largely to the status of microplasma science and our understanding of the physics principles that enable microplasma operation and further stated that the rapid proliferation of microplasma applications made it impossible to cover both basic microplasma science and their application in a single review article.

  6. Hydrogen production by coal plasma gasification for fuel cell technology

    Energy Technology Data Exchange (ETDEWEB)

    Galvita, V. [Max-Planck-Institute, Dynamics of Complex Technical Systems, Sandtorstrasse 1, 39106, Magdeburg (Germany); Messerle, V.E.; Ustimenko, A.B. [Research Department of Plasmotechnics, 22 Zvereva str., 050100 Almaty (Kazakhstan)

    2007-11-15

    Coal gasification in steam and air atmosphere under arc plasma conditions has been investigated with Podmoskovnyi brown coal, Kuuchekinski bituminous coal and Canadian petrocoke. It was found that for those coals the gasification degree to synthesis gas were 92.3%, 95.8 and 78.6% correspondingly. The amount of produced syngas was 30-40% higher in steam than in air gasification of the coal. The reduction of the carbon monoxide content in the hydrogen-rich reformate gas for low-temperature fuel cell applications normally involves high- and low-temperature water gas shift reactors followed by selective oxidation of residual carbon monoxide. It is shown that the carbon monoxide content can be reduced in one single reactor, which is based on an iron redox cycle. During the reduction phase of the cycle, the raw gas mixture of H{sub 2} and CO reduces a Fe{sub 3}O{sub 4}-CeO{sub 2}-ZrO{sub 2} sample, while during the oxidation phase steam re-oxidizes the iron and simultaneously hydrogen is being produced. The integration of the redox iron process with a coal plasma gasification technology in future allows the production of CO{sub x}-free hydrogen. (author)

  7. Medical photography: current technology, evolving issues and legal perspectives.

    Science.gov (United States)

    Harting, M T; DeWees, J M; Vela, K M; Khirallah, R T

    2015-04-01

    Medical photographic image capture and data management has undergone a rapid and compelling change in complexity over the last 20 years. This is because of multiple factors, including significant advances in ease of photograph capture, alongside an evolution of mechanisms of data portability/dissemination, combined with governmental focus on health information privacy. Literature to guide medical, legal, governmental and business professionals when dealing with issues related to medical photography is virtually nonexistent. Herein, we will address the breadth of uses of medical photography, device properties/specific devices utilised for image capture, methods of data transfer and dissemination and patient perceptions and attitudes regarding photography in a medical setting. In addition, we will address the legal implications, including legal precedent, copyright and privacy law, informed consent, protected health information and the Health Insurance Portability and Accountability Act (HIPAA), as they pertain to medical photography.

  8. Some Issues on Computer Networks: Architecture and Key Technologies

    Institute of Scientific and Technical Information of China (English)

    Guan-Qun Gu; Jun-Zhou Luo

    2006-01-01

    The evolution of computer networks has experienced several major steps, and research focus of each step has been kept changing and evolving, from ARPANET to OSI/RM, then HSN (high speed network) and HPN (high performance network). During the evolution, computer networks represented by Internet have made great progress and gained unprecedented success. However, with the appearance and intensification of tussle, along with the three difficult problems (service customizing, resource control and user management) of modern network, it is found that traditional Internet and its architecture no longer meet the requirements of next generation network. Therefore, it is the next generation network that current Internet must evolve to. With the mindset of achieving valuable guidance for research on next generation network, this paper firstly analyzes some dilemmas facing current Internet and its architecture, and then surveys some recent influential research work and progresses in computer networks and related areas, including new generation network architecture, network resource control technologies, network management and security, distributed computing and middleware,wireless/mobile network, new generation network services and applications, and foundational theories on network modeling.Finally, this paper concludes that within the research on next generation network, more attention should be paid to the high availability network and corresponding architecture, key theories and supporting technologies.

  9. Advanced plasma etching processes for dielectric materials in VLSI technology

    Science.gov (United States)

    Wang, Juan Juan

    Manufacturable plasma etching processes for dielectric materials have played an important role in the Integrated Circuits (IC) industry in recent decades. Dielectric materials such as SiO2 and SiN are widely used to electrically isolate the active device regions (like the gate, source and drain from the first level of metallic interconnects) and to isolate different metallic interconnect levels from each other. However, development of new state-of-the-art etching processes is urgently needed for higher aspect ratio (oxide depth/hole diameter---6:1) in Very Large Scale Integrated (VLSI) circuits technology. The smaller features can provide greater packing density of devices on a single chip and greater number of chips on a single wafer. This dissertation focuses on understanding and optimizing of several key aspects of etching processes for dielectric materials. The challenges are how to get higher selectivity of oxide/Si for contact and oxide/TiN for vias; tight Critical Dimension (CD) control; wide process margin (enough over-etch); uniformity and repeatability. By exploring all of the parameters for the plasma etch process, the key variables are found and studied extensively. The parameters investigated here are Power, Pressure, Gas ratio, and Temperature. In particular, the novel gases such as C4F8, C5F8, and C4F6 were studied in order to meet the requirements of the design rules. We also studied CF4 that is used frequently for dielectric material etching in the industry. Advanced etch equipment was used for the above applications: the medium-density plasma tools (like Magnet-Enhanced Reactive Ion Etching (MERIE) tool) and the high-density plasma tools. By applying the Design of Experiments (DOE) method, we found the key factors needed to predict the trend of the etch process (such as how to increase the etch rates, selectivity, etc.; and how to control the stability of the etch process). We used JMP software to analyze the DOE data. The characterization of the

  10. A plasma formulary for physics, technology, and astrophysics

    CERN Document Server

    Diver, Declan

    2011-01-01

    Plasma physics has matured rapidly as a discipline, and now touches on many different research areas, including manufacturing processes. This collection of fundamental formulae and definitions in plasma physics is vital to anyone with an interest in plasmas or ionized gases, whether in physics, astronomy or engineering.Both theorists and experimentalists will find this book useful, as it incorporates the latest results and findings.The text treats astrophysical plasmas, fusion plasmas, industrial plasmas and low temperature plasmas as aspects of the same discipline - a unique approach made pos

  11. National Technology Standards for K-12 Schools: A Case Study of Unresolved Issues in Public Relations

    Science.gov (United States)

    Mullen, Carol A.; Kealy, William A.; Sullivan, Ashley

    2004-01-01

    This article addresses an important need--the dissemination of information relating to technology as a public relations tool--and the associated exigency for administrator and teacher technology training. Specifically, we identify the increased expectations for the performance of school leaders and teachers, as well as unresolved issues in public…

  12. Research Trends and Issues in Educational Technology: A Content Analysis of TOJET (2008-2011)

    Science.gov (United States)

    Bozkaya, Mujgan; Aydin, Irem Erdem; Kumtepe, Evrim Genc

    2012-01-01

    This study has been conducted to evaluate the contents of articles published in the Turkish Online Journal of Educational Technology (TOJET) between 2008 and 2011. General aim of the study is to review on what trends, issues and research methods on which studies of educational technology have concentrated in the last four years. Thus, articles…

  13. A Detailed Analysis over Some Important Issues towards Using Computer Technology into the EFL Classrooms

    Science.gov (United States)

    Gilakjani, Abbas Pourhosein

    2014-01-01

    Computer technology has changed the ways we work, learn, interact and spend our leisure time. Computer technology has changed every aspect of our daily life--how and where we get our news, how we order goods and services, and how we communicate. This study investigates some of the significant issues concerning the use of computer technology…

  14. Issues in Integrating Information Technology in Learning and Teaching EFL: The Saudi Experience

    Science.gov (United States)

    Al-Maini, Yousef Hamad

    2013-01-01

    The Saudi education system is facing a climate of change characterized by an interest in integrating new technology and educational approaches to improve teaching and learning. In this climate, the present paper explores the issues in integrating information technology in learning and teaching English as a foreign language (EFL) in government…

  15. Methods and Applications for Advancing Distance Education Technologies: International Issues and Solutions

    Science.gov (United States)

    Syed, Mahbubur Rahman, Ed.

    2009-01-01

    The emerging field of advanced distance education delivers academic courses across time and distance, allowing educators and students to participate in a convenient learning method. "Methods and Applications for Advancing Distance Education Technologies: International Issues and Solutions" demonstrates communication technologies, intelligent…

  16. Review of mercury removal from flue gas using non-thermal plasma technology

    Directory of Open Access Journals (Sweden)

    Tao Zhu

    2014-06-01

    Full Text Available Mercury with various constituents in flue gas produced by burning coal could be an attractive alternative to non-thermal plasma process for mercury control. The mechanism of removal for pollutants using non-thermal plasma technology and the electric discharge form of non-thermal plasma are introduced. Then, we summary the research progress of mercury removal by non-thermal plasma in recent years, especially focus on how to oxide the elemental mercury from flue gas. We hope the non-thermal plasma technology can be improved to apply in the industry in the near future.

  17. Investigation of Defect Free SiGe Nanowire Biosensor Modified by Dual Plasma Technology.

    Science.gov (United States)

    Chen, Yi-Ming; Chang, Tai-Yuan; Lai, Chiung-Hui; Chang, Kow-Ming; Chen, Chu-Feng; Lai, Yi-Lung; Whang, Allen Jong-Woei; Lai, Hui-Lung; Hsu, Terng-Ren

    2016-02-01

    Semiconductor nanowires (NWs) have been extensively investigated and discussed in various fields due to their unique physical properties. In this paper, we successfully produce SiGe NWs biosensor by VLSI technology. We propose the dual plasma technology with CF4 plasma pre-treatment and N2 plasma post-treatment for repairs of defects as well as optimization of SiGe NWs biosensor. The results indicate that sensitivity (S) of the biosensor with dual plasma technology has significantly improved at least 32.8%, suitable for producing industrial SiGe NWs biosensor in the future.

  18. A System Analysis for Determining Alternative Technological Issues for the Future

    Science.gov (United States)

    Magistrale, V. J.; Small, J.

    1967-01-01

    A systems engineering methodology is provided, by which future technological ventures may be examined utilizing particular national, corporate, or individual value judgments. Three matrix analyses are presented. The first matrix is concerned with the effect of technology on population increase, war, poverty, health, resources, and prejudice. The second matrix explores an analytical technique for determining the relative importance of different areas of technology. The third matrix explores how an individual or corporate entity may determine how its capability may be used for future technological opportunities. No conclusions are presented since primary effort has been placed on the methodology of determining future technological issues.

  19. Thermal plasma technology for the treatment of wastes: a critical review.

    Science.gov (United States)

    Gomez, E; Rani, D Amutha; Cheeseman, C R; Deegan, D; Wise, M; Boccaccini, A R

    2009-01-30

    This review describes the current status of waste treatment using thermal plasma technology. A comprehensive analysis of the available scientific and technical literature on waste plasma treatment is presented, including the treatment of a variety of hazardous wastes, such as residues from municipal solid waste incineration, slag and dust from steel production, asbestos-containing wastes, health care wastes and organic liquid wastes. The principles of thermal plasma generation and the technologies available are outlined, together with potential applications for plasma vitrified products. There have been continued advances in the application of plasma technology for waste treatment, and this is now a viable alternative to other potential treatment/disposal options. Regulatory, economic and socio-political drivers are promoting adoption of advanced thermal conversion techniques such as thermal plasma technology and these are expected to become increasingly commercially viable in the future.

  20. TRENDS AND ISSUES: A REVIEW OF STUDIES RELATED TO TECHNOLOGY USAGE IN EARLY CHILDHOOD EDUCATION

    OpenAIRE

    Elif ÖZTÜRK YILMAZTEKİN; OLGAN, Refika

    2013-01-01

    This paper describes types of technology studies that have been conducted related to young children’s early education. A systematic review of studies was undertaken using EBSCOhost, Blackwell Synergy, and ScienceDirect databases, to identify all studies published between 2003 and 2009 according to specific criteria. The studies were selected on the basis of the following three issues: (1) the role of technology in children’s development, (2) the role of technology in teachers’ teaching pract...

  1. Critical issues in urban technologies for sustainable development: The case of water infrastructure in Mexico City

    Energy Technology Data Exchange (ETDEWEB)

    Zoreda-Lozano, J.J.; Castaneda, V. [Univ. Autonoma Metropolitana-Xochimilco (Mexico)

    1998-11-01

    This paper presents a general approach to the structural links between urban technologies for water use and sustainable development in Mexico City. These links belong to the public domain and are sufficiently generalizable so as to be expanded and modified to suit other technologies in similar contexts. They offer a convenient backdrop against which to meaningfully address critical technological issues that affect the performance of urban settlements as well as their biophysical environments.

  2. Issues of doing gender and doing technology - Music as an innovative theme for technology education

    Science.gov (United States)

    Thaler, A.; Zorn, I.

    2010-08-01

    This paper presents the concept and results of the research project 'Engineer Your Sound!' (2008-2009). It aimed at exploring whether interdisciplinary, innovative teaching/learning settings in the fields of technology and digital media can be used to give pupils the opportunities to experiment and discover their technical potential, skills, interests and talents and if music technology could offer such an appealing context. The paper explains how technology and why gender need to be addressed when planning to raise young people's interest in technology but questions if interest in technology is mainly influenced by gender. The paper explores through ethnographic research how pupils' technological competencies and interests have developed during the course of a technology-related project. Results of the analysis explain how music technology can serve as a suitable theme with the potential to increase both males' and females' interest in technology.

  3. Instrument technology for magnetosphere plasma imaging from high Earth orbit. Design of a radio plasma sounder

    Science.gov (United States)

    Haines, D. Mark; Reinisch, Bodo W.

    1995-01-01

    The use of radio sounding techniques for the study of the ionospheric plasma dates back to G. Briet and M. A. Tuve in 1926. Ground based swept frequency sounders can monitor the electron number density (N(sub e)) as a function of height (the N(sub e) profile). These early instruments evolved into a global network that produced high-resolution displays of echo time delay vs frequency on 35-mm film. These instruments provided the foundation for the success of the International Geophysical Year (1958). The Alouette and International Satellites for Ionospheric Studies (ISIS) programs pioneered the used of spaceborne, swept frequency sounders to obtain N(sub e) profiles of the topside of the ionosphere, from a position above the electron density maximum. Repeated measurements during the orbit produced an orbital plane contour which routinely provided density measurements to within 10%. The Alouette/ISIS experience also showed that even with a high powered transmitter (compared to the low power sounder possible today) a radio sounder can be compatible with other imaging instruments on the same satellite. Digital technology was used on later spacecraft developed by the Japanese (the EXOS C and D) and the Soviets (Intercosmos 19 and Cosmos 1809). However, a full coherent pulse compression and spectral integrating capability, such as exist today for ground-based sounders (Reinisch et al., 1992), has never been put into space. NASA's 1990 Space Physics Strategy Implementation Study "The NASA Space Physics Program from 1995 to 2010" suggested using radio sounders to study the plasmasphere and the magnetopause and its boundary layers (Green and Fung, 1993). Both the magnetopause and plasmasphere, as well as the cusp and boundary layers, can be observed by a radio sounder in a high-inclination polar orbit with an apogee greater than 6 R(sub e) (Reiff et al., 1994; Calvert et al., 1995). Magnetospheric radio sounding from space will provide remote density measurements of

  4. PREFACE: 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) and 25th Symposium on Plasma Science for Materials (SPSM-25)

    Science.gov (United States)

    Watanabe, Takayuki; Kaneko, Toshio; Sekine, Makoto; Tanaka, Yasunori

    2013-06-01

    The 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) was held in Kyoto, Japan on 2-5 October 2012 with the 25th Symposium on Plasma Science for Materials (SPSM-25). SPSM has been held annually since 1988 under the sponsorship of The 153rd Committee on Plasma Materials Science, Japan Society for the Promotion of Science (JSPS). This symposium is one of the major activities of the Committee, which is organized by researchers in academia and industry for the purpose of advancing intersectional scientific information exchange and discussion of science and technology of plasma materials processing. APCPST and SPSM are jointly held biennially to survey the current status of low temperature and thermal plasma physics and chemistry for industrial applications. The whole area of plasma processing was covered from fundamentals to applications. Previous meetings were held in China, Japan, Korea, and Australia, attended by scientists from the Asia-Pacific and other countries. The joint conference was organized in plenary lectures, invited, contributed oral presentations and poster sessions. At this meeting, we had 386 participants from 10 countries and 398 presentations, including 26 invited presentations. This year, we arranged special topical sessions that covered green innovation, life innovation, and technical reports from industry. This conference seeks to bring the plasma community together and to create a forum for discussing the latest developments and issues, the challenges ahead in the field of plasma research and applications among engineers and scientists in Asia, the Pacific Rim, as well as Europe. This volume presents 44 papers that were selected via a strict peer-review process from full papers submitted for the proceedings of the conference. The topics range from the basic physics and chemistry of plasma processing to a broad variety of materials processing and environmental applications. This volume offers an overview of recent

  5. Platinum and Iridium Coatings Obtained by Double Glow Plasma Technology

    Institute of Scientific and Technical Information of China (English)

    WU Wangping; CHEN Zhaofeng; CHEN Zhou; CONG Xiangna; QIU Jinlian

    2012-01-01

    Pt and Ir coatings were produced by double glow plasma technology on the surface of Ti alloy substrates.The chemical compositions of the coatings were determined by X-ray diffraction and X-ray photoelectron spectroscopy.The microstructure and morphology of the coatings were observed by scanning electron microscopy.The hardness and elastic modulus of the coatings were estimated by nanoindentation.The measurements of adhesive forces of the coatings were performed with scratch tester.The results indicated that the Pt and Ir coatings displayed the preferred (220) orientation due to the initial nuclei with preferred growth on the surface of the substrates.The interface between the Pt coating and substrate exhibited no evidence of delamination.The Ir coating was composed of irregular columnar grains with many nanovoids at the interface between the coating and substrate.The mean values of hardness for Pt and Ir coatings were 0.9 GPa and 9 GPa,respectively.The elastic modulus of Pt and Ir coatings were 178 GPa and 339 GPa,respectively.The adhesive forces of the Pt and Ir coatings were about 66.4 N and 55 N,respectively.The Pt and Ir coatings adhered well to the Ti alloy substrates.

  6. Investigating load management technology options: a survey of technologies and issues. Final report. [Competitive interrelationships of LM, conservation, and renewables

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-12-01

    Load-management-technology options are commercially available and may be desirable in many utility-service areas. Energy-conservation and renewable-energy-supply technologies are also cost-effective in many applications and, where installed, may reduce the effectiveness and attractiveness of load-management options. Recent energy legislation has not addressed these competitive interrelationships; future legislation is unlikely to do so unless a coordinated task-force effort among relevant DOE offices is pursued to derive strategic technology and policy recommendations on this issue. R and D strategies should help formulate these recommendations.

  7. Quantitative analysis of plasma proteins in whole blood-derived fresh frozen plasma prepared with three pathogen reduction technologies.

    Science.gov (United States)

    Larrea, Luis; Ortiz-de-Salazar, María-Isabel; Martínez, Patricia; Roig, Roberto

    2015-06-01

    Several plasma pathogen reduction technologies (PRT) are currently available. We evaluated three plasma PRT processes: Cerus Amotosalen (AM), Terumo BCT riboflavin (RB) and Macopharma methylene blue (MB). RB treatment resulted in the shortest overall processing time and in the smallest volume loss (1%) and MB treatment in the largest volume loss (8%). MB treatment retained the highest concentrations of factors II, VII, X, IX, Protein C, and Antithrombin and the AM products of factor V and XI. Each PRT process evaluated offered distinct advantages such as procedural simplicity and volume retention (RB) and overall plasma protein retention (MB).

  8. Interface modification and material synthesis of organic light-emitting diodes using plasma technology

    Science.gov (United States)

    Liang, Rongqing; Ou, Qiongrong; Yang, Cheng; He, Kongduo; Yang, Xilu; Zhong, Shaofeng; plasma application Team

    2015-09-01

    Organic light-emitting diodes (OLEDs), due to their unique properties of solution processability, compatibility with flexible substrates and with large-scale printing technology, attract huge interest in the field of lighting. The integration of plasma technology into OLEDs provides a new route to improve their performance. Here we demonstrate the modification of indium-tin-oxide (ITO) work function by plasma treatment, synthesis of thermally activated delayed fluorescence (TADF) materials using plasma grafting (polymerisation), and multi-layer solution processing achieved by plasma cross-linking.

  9. Study of Multi-Function Micro-Plasma Spraying Technology

    Institute of Scientific and Technical Information of China (English)

    WANG Liuying; WANG Hangong; HUA Shaochun; CAO Xiaoping

    2007-01-01

    A multi-functional micro-arc plasma spraying system was developed according to aerodynamics and plasma spray theory. The soft switch IGBT (Insulated Gate Bipolar Transistor) invert technique, micro-computer control technique, convergent-divergent nozzle structure and axial powder feeding techniques have been adopted in the design of the micro-arc plasma spraying system. It is not only characterized by a small volume, a light weight, highly accurate control, high deposition efficiency and high reliability, but also has multi-functions in plasma spraying, welding and quenching. The experimental results showed that the system can produce a supersonic flame at a low power, spray Al2O3 particles at an average speed up to 430 m/s, and make nanostructured AT13 coatings with an average bonding strength of 42.7 MPa. Compared to conventional 9M plasma spraying with a higher power, the coatings with almost the same properties as those by conventional plasma spray can be deposited by multi-functional micro-arc plasma spraying with a lower power plasma arc due to an improved power supply design, spray gun structure and powder feeding method. Moreover, this system is suitable for working with thin parts and undertaking on site repairs, and as a result, the application of plasma spraying will be greatly extended.

  10. An Investigation of Information Technology-Enabled Remote Management and Remote Work Issues

    Directory of Open Access Journals (Sweden)

    D. Sandy Staples

    1997-05-01

    Full Text Available A two phase research study was done to investigate remote work and remote management issues. In Phase 1, focus groups were carried out with remote managers and remote employees to identify key issues. The most common key issues dealt with communications, information technology, leadership and coaching, teamwork, building trust, and performance management. In the second phase, a questionnaire was used to test hypotheses developed from phase 1. The findings supported that higher trust leads to higher job satisfaction and lower job stress, and that more communication between the manager and the remote employee develops higher levels of employee organizational commitment.

  11. Creating virtual communities of practice for learning technology in higher education: issues, challenges and experiences

    OpenAIRE

    Jacqueline A. Dempster; Beetham, Helen; Jackson, Peter; Richardson, Steven

    2003-01-01

    The need for a Web portal to support the rapidly growing field of learning technology has been well established through a number of national surveys and scoping studies over recent years. The overarching vision has been the provision of a virtual environment to assist in informing and developing professional practice in the use of learning technologies. This paper outlines the issues and challenges in creating such a portal through the experiences of developing the RESULTs Network. In the pap...

  12. Address for the Beginning Issue of “RFID Technologies and Applicationsn”

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Recently RFID technology got a widely attentions. As a result of this, RFID Technology and Application is published as the first professional RFID publication mainly issuing in the China and Hong Kong, Macao and Taiwan. This article summarizes the RFID characteristic, suitable applied field and its development situation and its developing reason in Asia-Pacific area. The article also presents the Magazine’s target and goal, column and the future perspective.

  13. Cold oxygen plasma technology efficiency against different airborne respiratory viruses.

    Science.gov (United States)

    Terrier, O; Essere, B; Yver, M; Barthélémy, M; Bouscambert-Duchamp, M; Kurtz, P; VanMechelen, D; Morfin, F; Billaud, G; Ferraris, O; Lina, B; Rosa-Calatrava, M; Moules, V

    2009-06-01

    Respiratory infections caused by viruses are major causes of upper and lower respiratory tract infections. They account for an important mortality and morbidity worldwide. Amongst these viruses, influenza viruses and paramyxoviruses are major pathogens. Their transmission is mainly airborne, by direct transmission through droplets from infected cases. In the context of an influenza pandemic, as well as for the reduction of nosocomial infections, systems that can reduce or control virus transmission will reduce the burden of this disease. It may also be part of the strategy for pandemic mitigation. A new system based on physical decontamination of surface and air has been developed. This process generates cold oxygen plasma (COP) by subjecting air to high-energy deep-UV light. To test its efficiency, we have developed an experimental device to assess for the decontamination of nebulized respiratory viruses. High titer suspensions of influenza virus type A, human parainfluenza virus type 3 and RSV have been tested. Different experimental conditions have been evaluated against these viruses. The use of COP with an internal device allowed the best results against all viruses tested. We recorded a reduction of 6.5, 3.8 and 4 log(10) TCID50/mL of the titre of the hPIV-3, RSV and influenza virus A (H5N2) suspensions. The COP technology is an efficient and innovative strategy to control airborne virus dissemination. It could successfully control nosocomial diffusion of respiratory viruses in hospital setting, and could be useful for the reduction of influenza transmission in the various consultation settings implemented for the management of cases during a pandemic.

  14. Research progress of laser welding process dynamic monitoring technology based on plasma characteristics signal

    Directory of Open Access Journals (Sweden)

    Teng WANG

    2017-02-01

    Full Text Available During the high-power laser welding process, plasmas are induced by the evaporation of metal under laser radiation, which can affect the coupling of laser energy and the workpiece, and ultimately impact on the reliability of laser welding quality and process directly. The research of laser-induced plasma is a focus in high-power deep penetration welding field, which provides a promising research area for realizing the automation of welding process quality inspection. In recent years, the research of laser welding process dynamic monitoring technology based on plasma characteristics is mainly in two aspects, namely the research of plasma signal detection and the research of laser welding process modeling. The laser-induced plasma in the laser welding is introduced, and the related research of laser welding process dynamic monitoring technology based on plasma characteristics at home and abroad is analyzed. The current problems in the field are summarized, and the future development trend is put forward.

  15. Studying Marriage and Family Therapists in the 21st Century: Methodological and Technological Issues

    Science.gov (United States)

    Northey, William F., Jr.

    2005-01-01

    In this article, I present data from two waves of research on demographic characteristics and practice patterns of marriage and family therapists (MFTs) conducted in 2000 and 2002. The research focuses on the methodological and technological issues in studying this population. Specifically, an online survey with MFTs obtained lower response rates…

  16. Future Critical Issues and Problems Facing Technology and Engineering Education in the Commonwealth of Virginia

    Science.gov (United States)

    Katsioloudis, Petros; Moye, Johnny J.

    2012-01-01

    The purpose of this research was to determine the future critical issues and problems facing the K-12 technology and engineering education profession in the Commonwealth of Virginia. This study was based on the Wicklein nationwide studies (1993a, 2005). Even though this study did not exactly replicate the Wicklein studies--since it was limited to…

  17. Beyond Digital Natives: European Research on Media Education; Challenges of Technology and Pedagogical Issues

    Science.gov (United States)

    Rivoltella, Pier Cesare

    2012-01-01

    This article aims to map issues of Media Education currently under debate in Europe. It points out three main research trends. The first one concerns digital natives and their skills in media and technologies. Here we have quite a dialectic situation: on the one hand, a lot of scholars and policymakers are sure that digital natives exist, that…

  18. Application of plasma technology for the modification of polymer and textile materials

    OpenAIRE

    Radetić Maja M.; Petrović Zoran Lj.

    2004-01-01

    Plasma treatment is based on the physico-chemical changes of the material surface and as an ecologically and economically acceptable process it can be an attractive alternative to conventional modifications. The possibilities of plasma technology application to the modification of polymer and textile materials are discussed. Different specific properties of the material can be achieved by plasma cleaning, etching, functionalization or polymerization. The final effects are strongly influenced ...

  19. Gender issues in US science and technology policy: equality of what?

    Science.gov (United States)

    Cozzens, Susan E

    2008-09-01

    Fairness in evaluation processes for women in science and engineering is only one of a set of issues that need to be addressed to reach gender equality. This article uses concepts from Amartya Sen's work on inequality to frame gender issues in science and technology policy. Programs that focus on increasing the number of women in science and engineering careers have not generally addressed a broader set of circumstances that intersect with gender at various economic levels and stages of life. The agendas in research and innovation policies also need to reflect these issues, and fair allocation of resources within both science and technology needs to be on the agenda. Getting women into high-level positions is not enough. Articulating the full research and innovation agendas for women will require broader participatory processes.

  20. E-Business: Application of software and technology in selected Ethiopian banks - Issues and challenges

    Directory of Open Access Journals (Sweden)

    Bhaskar Reddy Muvva Vijay

    2011-11-01

    Full Text Available The application of software and technology is inevitable in the present competitive banking industry. Ethiopian banking system is one of the most underdeveloped compared to the rest of the world. In Ethiopia cash is still the most dominant medium of exchange and Electronic-banking is not well known, let alone used for transacting banking issues. The article tries to examine specific issues and challenges in Ethiopian banking system. The present study further highlights various selecting issues and service quality systems practiced in selected banks. Survey method is used to collect data from practicing managers of banking industry. It further analyzes the present obstacles and hindrances in improving and facilitating the present banking services with application of customize software and technology.

  1. Why people use and don't use technologies: Introduction to the special issue on assistive technologies for cognition/cognitive support technologies.

    Science.gov (United States)

    Scherer, Marcia J; Federici, Stefano

    2015-01-01

    This special issue focuses on assistive technologies for cognition/cognitive support technologies as well as the ways in which individuals are assessed and trained in their use. We provide eleven diverse articles that give information on products, why they are used and not used, and best professional practices in service provision. Our goal is to highlight a broad topic that has received limited research investigation and offer an insight into how different countries and programs are promoting access to and use of assistive technologies for cognition/cognitive support technologies.

  2. TRENDS AND ISSUES: A REVIEW OF STUDIES RELATED TO TECHNOLOGY USAGE IN EARLY CHILDHOOD EDUCATION

    Directory of Open Access Journals (Sweden)

    Elif ÖZTÜRK YILMAZTEKİN

    2013-06-01

    Full Text Available This paper describes types of technology studies that have been conducted related to young children’s early education. A systematic review of studies was undertaken using EBSCOhost, Blackwell Synergy, and ScienceDirect databases, to identify all studies published between 2003 and 2009 according to specific criteria. The studies were selected on the basis of the following three issues: (1 the role of technology in children’s development, (2 the role of technology in teachers’ teaching practices, and (3 studies that aimed to investigate the impact of technology usage on not only teacher practices but also young children’s development in school settings. In for each type of study the methodology, types of technology used, purposes and findings and other features including the publication year, and study locations are given in detail.

  3. Plasma ion sources and ion beam technology inmicrofabrications

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Lili [Univ. of California, Berkeley, CA (United States)

    2007-01-01

    For over decades, focused ion beam (FIB) has been playing a very important role in microscale technology and research, among which, semiconductor microfabrication is one of its biggest application area. As the dimensions of IC devices are scaled down, it has shown the need for new ion beam tools and new approaches to the fabrication of small-scale devices. In the meanwhile, nanotechnology has also deeply involved in material science research and bioresearch in recent years. The conventional FIB systems which utilize liquid gallium ion sources to achieve nanometer scale resolution can no longer meet the various requirements raised from such a wide application area such as low contamination, high throughput and so on. The drive towards controlling materials properties at nanometer length scales relies on the availability of efficient tools. In this thesis, three novel ion beam tools have been developed and investigated as the alternatives for the conventional FIB systems in some particular applications. An integrated focused ion beam (FIB) and scanning electron microscope (SEM) system has been developed for direct doping or surface modification. This new instrument employs a mini-RF driven plasma source to generate focused ion beam with various ion species, a FEI two-lens electron (2LE) column for SEM imaging, and a five-axis manipulator system for sample positioning. An all-electrostatic two-lens column has been designed to focus the ion beam extracted from the source. Based on the Munro ion optics simulation, beam spot sizes as small as 100 nm can be achieved at beam energies between 5 to 35 keV if a 5 μm-diameter extraction aperture is used. Smaller beam spot sizes can be obtained with smaller apertures at sacrifice of some beam current. The FEI 2LE column, which utilizes Schottky emission, electrostatic focusing optics, and stacked-disk column construction, can provide high-resolution (as small as 20 nm) imaging capability, with fairly long working distance (25

  4. Functionalization of biomedical materials using plasma and related technologies

    Science.gov (United States)

    Zhao, Ying; Yeung, Kelvin W. K.; Chu, Paul K.

    2014-08-01

    Plasma techniques are important to biomedical engineering and surface modification. By modifying selective surface characteristics, conventional materials can be designed with superior biological properties while the favorable bulk materials properties can be retained. In this mini-review, recent progress pertaining to surface modification of Mg-based and polymer-based biomaterials by plasma-based techniques such as gas or metal ion implantation, dual metal and gas ion implantation, as well as plasma immersion ion implantation and deposition is described. Plasma-based surface modification is promising in elevating the cell biocompatibility, blood compatibility, and antibacterial properties of Mg-based and polymer-based biomaterials and expected to be extensively applied to biomaterials.

  5. Gas plasma sterilization--application of space-age technology.

    Science.gov (United States)

    Crow, S; Smith, J H

    1995-08-01

    Gas plasma sterilization is new to the healthcare field. The first such sterilizer has been manufactured by Advanced Sterilization Products (J&J, Irvine, CA). The system uses hydrogen peroxide as the substrate gas and radio frequency emissions to generate plasma. This system is a low-temperature, quick-acting process with no toxic residues. It appears that this sterilizer system holds promise in the healthcare field and could help to reduce the use of ethylene oxide.

  6. Issues of Doing Gender and Doing Technology--Music as an Innovative Theme for Technology Education

    Science.gov (United States)

    Thaler, A.; Zorn, I.

    2010-01-01

    This paper presents the concept and results of the research project "Engineer Your Sound!" (2008-2009). It aimed at exploring whether interdisciplinary, innovative teaching/learning settings in the fields of technology and digital media can be used to give pupils the opportunities to experiment and discover their technical potential, skills,…

  7. Global Information Technology Education: Issues and Trends. Series in Global Information Technology Management.

    Science.gov (United States)

    Khosrowpour, Mehdi; Loch, Karen D.

    This book provides insight into how countries around the world currently define their information science (IS) and information technology (IT) masters degree curriculum, and how they are responding to the challenge of internationalization. Global IT programs from both developed and developing countries are presented. Faculty and researchers are…

  8. Proceedings of the Hydrokinetic and Wave Energy Technologies Technical and Environmental Issues Workshop

    Energy Technology Data Exchange (ETDEWEB)

    None

    2006-03-01

    Renewable energy technologies offer the promise of non-polluting alternatives to fossil and nuclear-fueled power plants to meet growing demand for electrical energy. Two emerging categories of renewable energy technologies, hydrokinetic and wave energy conversion devices, offer ways to tap the energy of moving water without impoundment (dams) or diversion required by many conventional hydroelectric facilities. These technologies include devices designed for deployment in natural streams, tidal estuaries, ocean currents, and constructed waterways, as well as devices designed to capture the energy of ocean waves. On October 26-28, 2005, 54 representatives from government, non-governmental organizations, and private business met to (1) identify the varieties of hydrokinetic energy and wave technology devices, their stages of development, and the projected cost to bring each to market; (2) identify where these technologies can best operate; (3) identify the potential environmental issues associated with these technologies and possible mitigation measures; (4) develop a list of research needs and/or practical solutions to address unresolved environmental issues. These workshop proceedings include detailed summaries of the 24 presentations made and the discussions that followed.

  9. Occupational therapy research on assistive technology and physical environmental issues: a literature review.

    Science.gov (United States)

    Ivanoff, Synneve Dahlin; Iwarsson, Susanne; Sonn, Ulla

    2006-04-01

    To determine future directions for research in the area of assistive technology and physical environmental issues, it is important to have an understanding of prior research. This literature review examined how assistive technology and physical environmental issues have been studied in the research published in international peer-reviewed occupational therapy journals. Five recent volumes of nine journals were manually searched utilizing specific criteria. The publications were classified according to their perspective, application of the Person-Environment-Occupation (PEO) model, and the research design. Both research fields demonstrated use of different research methods and they displayed equal needs with regard to improved research methodologies. There are a lack of studies involving all three PEO components indicating a lack of research in occupational performance issues. Further research on occupational performance is important for developing occupational therapy practice in the area of assistive technology and physical environmental issues. Furthermore, study designs reflecting the societal level in all three PEO components are required. Finally, there is a strong need for conceptual and theoretical development in both fields.

  10. Identifying the science and technology dimensions of emerging public policy issues through horizon scanning.

    Directory of Open Access Journals (Sweden)

    Miles Parker

    Full Text Available Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security.

  11. Identifying the science and technology dimensions of emerging public policy issues through horizon scanning.

    Science.gov (United States)

    Parker, Miles; Acland, Andrew; Armstrong, Harry J; Bellingham, Jim R; Bland, Jessica; Bodmer, Helen C; Burall, Simon; Castell, Sarah; Chilvers, Jason; Cleevely, David D; Cope, David; Costanzo, Lucia; Dolan, James A; Doubleday, Robert; Feng, Wai Yi; Godfray, H Charles J; Good, David A; Grant, Jonathan; Green, Nick; Groen, Arnoud J; Guilliams, Tim T; Gupta, Sunjai; Hall, Amanda C; Heathfield, Adam; Hotopp, Ulrike; Kass, Gary; Leeder, Tim; Lickorish, Fiona A; Lueshi, Leila M; Magee, Chris; Mata, Tiago; McBride, Tony; McCarthy, Natasha; Mercer, Alan; Neilson, Ross; Ouchikh, Jackie; Oughton, Edward J; Oxenham, David; Pallett, Helen; Palmer, James; Patmore, Jeff; Petts, Judith; Pinkerton, Jan; Ploszek, Richard; Pratt, Alan; Rocks, Sophie A; Stansfield, Neil; Surkovic, Elizabeth; Tyler, Christopher P; Watkinson, Andrew R; Wentworth, Jonny; Willis, Rebecca; Wollner, Patrick K A; Worts, Kim; Sutherland, William J

    2014-01-01

    Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics) elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security.

  12. Application of Nonlocal Electron Kinetics to Plasma Technologies

    Science.gov (United States)

    Kaganovich, Igor D.

    2011-10-01

    Partially ionized plasmas are typically in a highly non-equilibrium thermodynamic state: the electrons are not in equilibrium with the neutral particle species or the ions, and the electrons are also not in equilibrium within their own ensemble, which results in a significant departure of the electron velocity distribution function (EVDF) from a Maxwellian. These non-equilibrium conditions provide considerable freedom to choose optimal plasma parameters for applications, which make gas-discharge plasmas remarkable tools for a variety of plasma applications, including plasma processing, discharge lighting, plasma propulsion, particle beam sources, and nanotechnology. Significant progress in understanding the formation of non-Maxwellian EVDF in the self-consistent electric fields has been one of the major achievements in the low-temperature plasmas during the last decade. This progress was made possible by a synergy between full-scale particle-in-cell simulations, analytical models, and experiments. Specific examples include rf discharges, dc discharges with auxiliary electrodes, Hall thruster discharges. In each example, nonlocal kinetic effects are identified as the main mechanisms responsible for the surprising degree of discharge self-organization. These phenomena include: explosive generation of cold electrons with rf power increase in low-pressure rf discharges; abrupt changes in discharge structure with increased bias voltage on a third electrode in a dc discharge with hot cathode; absence of a steady-state regime in Hall thruster discharges with intense secondary electron emission due to coupling of the sheath properties and the EVDF. In collaboration with Y. Raitses, A.V. Khrabrov, M. Campanell, V. I. Demidov, D. Sydorenko, I. Schweigert, and A. S. Mustafaev. Research supported by the U.S. Department of Energy.

  13. Development of deep silicon plasma etching for 3D integration technology

    Directory of Open Access Journals (Sweden)

    Golishnikov А. А.

    2014-02-01

    Full Text Available Plasma etch process for thought-silicon via (TSV formation is one of the most important technological operations in the field of metal connections creation between stacked circuits in 3D assemble technology. TSV formation strongly depends on parameters such as Si-wafer thickness, aspect ratio, type of metallization material, etc. The authors investigate deep silicon plasma etch process for formation of TSV with controllable profile. The influence of process parameters on plasma etch rate, silicon etch selectivity to photoresist and the structure profile are researched in this paper. Technology with etch and passivation steps alternation was used as a method of deep silicon plasma etching. Experimental tool «Platrane-100» with high-density plasma reactor based on high-frequency ion source with transformer coupled plasma was used for deep silicon plasma etching. As actuation gases for deep silicon etching were chosen the following gases: SF6 was used for the etch stage and CHF3 was applied on the polymerization stage. As a result of research, the deep plasma etch process has been developed with the following parameters: silicon etch rate 6 µm/min, selectivity to photoresist 60 and structure profile 90±2°. This process provides formation of TSV 370 µm deep and about 120 µm in diameter.

  14. Green technology for conversion of renewable hydrocarbon based on plasma-catalytic approach

    Science.gov (United States)

    Fedirchyk, Igor; Nedybaliuk, Oleg; Chernyak, Valeriy; Demchina, Valentina

    2016-09-01

    The ability to convert renewable biomass into fuels and chemicals is one of the most important steps on our path to green technology and sustainable development. However, the complex composition of biomass poses a major problem for established conversion technologies. The high temperature of thermochemical biomass conversion often leads to the appearance of undesirable byproducts and waste. The catalytic conversion has reduced yield and feedstock range. Plasma-catalytic reforming technology opens a new path for biomass conversion by replacing feedstock-specific catalysts with free radicals generated in the plasma. We studied the plasma-catalytic conversion of several renewable hydrocarbons using the air plasma created by rotating gliding discharge. We found that plasma-catalytic hydrocarbon conversion can be conducted at significantly lower temperatures (500 K) than during the thermochemical ( 1000 K) and catalytic (800 K) conversion. By using gas chromatography, we determined conversion products and found that conversion efficiency of plasma-catalytic conversion reaches over 85%. We used obtained data to determine the energy yield of hydrogen in case of plasma-catalytic reforming of ethanol and compared it with other plasma-based hydrogen-generating systems.

  15. Developing the Science and Technology for the Material Plasma Exposure eXperiment (MPEX)

    Science.gov (United States)

    Rapp, Juergen; Biewer, Theodore; Bigelow, Timothy; Caughman, John; Goulding, Richard; Lumsdaine, Arnold; MPEX Team Team

    2016-10-01

    The Material Plasma Exposure eXperiment (MPEX) is a device planned to address scientific and technological gaps for the development of viable plasma facing components for fusion reactor conditions (FNSF, DEMO). MPEX is designed to deliver those plasma conditions with a novel Radio Frequency plasma source able to produce high density plasmas and heat electron and ions separately with Electron Bernstein Wave (EBW) heating and Ion Cyclotron Resonance Heating (ICRH) with a total installed power of 800 kW. The science and technology for this source system is currently being tested on Proto-MPEX. This is a linear device utilizing 12 water-cooled copper coils able to achieve peak magnetic fields of 1.6T. The currently total installed heating power (for helicon, EBW and ICRH) is 330kW. An overview of the status of this development program is given with an outlook to the next steps.

  16. EDITORIAL: Special issue on optical neural engineering: advances in optical stimulation technology Special issue on optical neural engineering: advances in optical stimulation technology

    Science.gov (United States)

    Shoham, Shy; Deisseroth, Karl

    2010-08-01

    a single spine, with two-photon uncaging) and in rapid, flexible spatial-temporal patterns [10-14]. Nevertheless, current technology generally requires damaging doses of UV or violet illumination and the continuous re-introduction of the caged compound, which, despite interest, makes for a difficult transition beyond in vitro preparations. Thus, the tremendous progress in the in vivo application of photo-stimulation tools over the past five years has been largely facilitated by two 'exciting' new photo-stimulation technologies: photo-biological stimulation of a rapidly increasing arsenal of light-sensitive ion channels and pumps ('optogenetic' probes[15-18]) and direct photo-thermal stimulation of neural tissue with an IR laser [19-21]. The Journal of Neural Engineering has dedicated a special section in this issue to highlight advances in optical stimulation technology, which includes original peer-reviewed contributions dealing with the design of modern optical systems for spatial-temporal control of optical excitation patterns and with the biophysics of neural-thermal interaction mediated by electromagnetic waves. The paper by Nikolenko, Peterka and Yuste [22] presents a compact design of a microscope-photo-stimulator based on a transmissive phase-modulating spatial-light modulator (SLM). Computer-generated holographic photo-stimulation using SLMs [12-14, 23] allows the efficient parallel projection of intense sparse patterns of light, and the welcome development of compact, user-friendly systems will likely reduce the barrier to its widespread adoption. The paper by Losavio et al [24] presents the design and functional characteristics of their acousto-optical deflector (AOD) systems for studying spatial-temporal dendritic integration in single neurons in vitro. Both single-photon (UV) and two-photon (femtosecond pulsed IR) AOD uncaging systems are described in detail. The paper presents an excellent overview of the current state of the art and limitations of

  17. Paradigm shifts in plasma processing and application of fundamental kinetics to problems targeting 5 nm technology device technology

    Science.gov (United States)

    Chen, Lee

    2016-09-01

    It is often said that semiconductor technology is approaching the end of scaling. While fundamental device limits do approach, plasma etching has been doing the heavy lifting to supplement the basic limits in lithography. RF plasmas, pulsing in many forms, diffusion plasmas are but a few of the important developments over the last 20 years that have succeeded in the seemingly impossible tasks. The commonality of these plasmas is being self-consistent: their near-Boltzmann EEDf maintains ionization with its tail while providing charge-balance with its Te . To control the plasma chemistry is to control its EEDf; the entanglement of ionization with charge-balance in self-consistent plasmas places a constraint on the decoupling of plasma chemistry from ionization. Example like DC/RF parallel-plate hybridizes stochastic heating with DC-cathode injected e- -beam. While such arrangement offers some level of decoupling, it raised more questions than what it helped answered along the lines of beam-plasma instabilities, bounce-resonance ionization, etc. Pure e- -beam plasmas could be a drastic departure from the self-consistent plasmas. Examples like the NRL e- -beam system and the more recent TEL NEP (Nonambipolar e- Plasma) show strong decoupling of Te from ionization but it is almost certain, many more questions lurk: the functions connecting collisional relaxation with instabilities, the channels causing the dissociation of large fluorocarbons (controlling the ion-to- radical ratio), the production of the damaging deep UV in e- -beam plasmas, etc., and the list goes on. IADf is one factor on feature-profile and IEDf determines the surgical surface-excitation governing the selectivity, and both functions have Ti as the origin; what controls the e- -beam plasmas' Ti ? RF-bias has served well in applications requiring energetic excitation but, are there ways to improve the IEDf tightness? What are the adverse side-effects of ``improved IEDf''? Decades ago an infant RF-plasma

  18. [Social consensus on medical technology policy: ethical issues and citizen participation].

    Science.gov (United States)

    Sato, Hajime

    2004-01-01

    Social consensus is considered to be a necessary condition for a policy to be introduced and implemented effectively. This is the case with the approval, regulation and prohibition of certain advanced medical research and technology, especially when they could invoke moral disputes in society. Public policies on organ transplantation, definition of death, euthanasia, genetic screening and diagnosis, and human stem cell research are recent examples. The concept of consensus, however, is elusive, along with the measures to secure it. Technocratic decision making, as a paternalistic activity frequently led by experts, sometimes poses a challenge to democratic decision making, supposedly based on a well-informed and rational public. It also remains to be proved whether public involvement in policymaking can be a solution to ethical value conflicts in society. From the perspective of policy sciences, this paper first introduces the concept of consensus, especially consensus on moral issues in pluralistic societies, and its implications to public policy, including citizen participation in decision making. Then, it briefly explains the historical background with which social consensus and public involvement have increasingly flourished in the field of technology assessments and technology policy making, including biomedical technology. Next, major institutions, governmental and nongovernmental, involved in the ethical aspects of medical research and technology, are presented along with their efforts for citizen participation. Finally, the paper discusses some of the future agendas on this issue.

  19. Coal gasification systems engineering and analysis. Appendix F: Critical technology items/issues

    Science.gov (United States)

    1980-01-01

    Critical technology items and issues are defined in which there is a need for developmental research in order to assure technical and economic success for the state of the art of coal gasification in the United States. Technology development needs for the main processing units and the supporting units are discussed. While development needs are shown for a large number of systems, the most critical areas are associated with the gasifier itself and those systems which either feed the gasifier or directly receive products form the gasifier.

  20. Pulsed Corona Plasma Technology for Treating VOC Emissions from Pulp Mills

    Energy Technology Data Exchange (ETDEWEB)

    Fridman, Alexander A.; Gutsol, Alexander; Kennedy, Lawrence A.; Saveliev, Alexei V.; Korobtsev, Sergey V.; Shiryaevsky, Valery L.; Medvedev, Dmitry

    2004-07-28

    Under the DOE Office of Industrial Technologies Forest Products program various plasma technologies were evaluated under project FWP 49885 ''Experimental Assessment of Low-Temperature Plasma Technologies for Treating Volatile Organic Compound Emissions from Pulp Mills and Wood Products Plants''. The heterogeneous pulsed corona discharge was chosen as the best non-equilibrium plasma technology for control of the vent emissions from HVLC Brownstock Washers. The technology for removal of Volatile Organic Compounds (VOCs) from gas emissions with conditions typical of the exhausts of the paper industry by means of pulsed corona plasma techniques presented in this work. For the compounds of interest in this study (methanol, acetone, dimethyl sulfide and ? -pinene), high removal efficiencies were obtained with power levels competitive with the present technologies for the VOCs removal. Laboratory experiments were made using installation with the average power up to 20 W. Pilot plant prepared for on-site test has average plasma power up to 6.4 kW. The model of the Pilot Plant operation is presented.

  1. Cold plasma as a nonthermal food processing technology

    Science.gov (United States)

    Contamination of meats, seafood, poultry, eggs, and fresh and fresh-cut fruits and vegetables is an ongoing concern. Although well-established in non-food applications for surface treatment and modification, cold plasma is a relatively new food safety intervention. As a nonthermal food processing te...

  2. Alcatel Vacuum Technology A Recognized Leader in Deep Plasma Etching

    Institute of Scientific and Technical Information of China (English)

    阿尔卡特真空技术(上海)有限公司

    2005-01-01

    @@ Its first equipment based on a Alcatel patented Inductive Coupled Plasma (ICP) source, with independent source power and substrate bias control for deep etching of silicon was launched in 1993. The exponential growth potential of the MEMS (Micro Electro Mechanical Systems) industry gave birth to the Micro Machining Systems business group (MMS) in 1994.

  3. Scientific and Technological Challenges of Diagnosing Burning Plasmas

    Science.gov (United States)

    Boivin, R. L.

    2009-05-01

    Research in magnetically confined fusion is now approaching a major milestone which is in evaluating and controlling burning plasma conditions. This milestone will be first met in the ITER experiment, presently being built in Cadarache, France through an international partnership, which includes China, the European Union, India, Japan, South Korea, Russia and the United States. In order to achieve its mission of achieving burning plasma conditions, and possibly ignition, a comprehensive set of scientific instruments (diagnostics) is being planned. That set represents the culmination of more than 50 years of development and research. More than 40 plasma parameters will be measured, including many which will be directly controlled. Some of these measurements will be done for the first time, such as probing the production, distribution and behavior of fusion produced, i.e. alpha particles, a key element in sustaining the fusion reaction process. These measurements will need to be done in a hostile environment, where a large nuclear radiation field, substantial direct particle flux, long pulse length and lack of direct access will bring severe constraints. Furthermore, the needs of the experiment will demand high reliability, low maintenance and the ability to retain a good calibration over a long period of time. We will review the challenges of the task and the opportunities for scientific breakthroughs from these state-of-the-art diagnostics instruments, as they pertain to the specific context of burning plasma conditions, together with examples of where these measurements will directly impact our scientific understanding and ability to control these conditions.

  4. Technological Issues and High Gradient Test Results on X-Band Molybdenum Accelerating Structures

    Energy Technology Data Exchange (ETDEWEB)

    Spataro, B.; /LNF, Dafne Light; Alesini, D.; /LNF, Dafne Light; Chimenti, V.; /LNF, Dafne Light; Dolgashev, V.; /SLAC; Haase, A.; /SLAC; Tantawi, S.G.; /SLAC; Higashi, Y.; /KEK, Tsukuba; Marrelli, C.; /Rome U.; Mostacci, A.; /Rome U.; Parodi, R.; /INFN, Genoa; Yeremian, A.D.; /SLAC

    2012-04-24

    Two 11.424 GHz single cell standing wave accelerating structures have been fabricated for high gradient RF breakdown studies. Both are brazed structures: one made from copper and the other from sintered molybdenum bulk. The tests results are presented and compared to those of similar devices constructed at SLAC (Stanford Linear Accelerator Center) and KEK (Ko Enerugi Kasokuki Kenkyu Kiko). The technological issues to build both sections are discussed.

  5. Technological issues and high gradient test results on X-band molybdenum accelerating structures

    Energy Technology Data Exchange (ETDEWEB)

    Spataro, B., E-mail: bruno.spataro@lnf.infn.it [INFN-LNF, Via E. Fermi 40, 00044 Frascati (Italy); Alesini, D.; Chimenti, V. [INFN-LNF, Via E. Fermi 40, 00044 Frascati (Italy); Dolgashev, V.; Haase, A.; Tantawi, S.G. [SLAC, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Higashi, Y. [KEK 1-1 Oho, Tsukuba, Ibaraki, 305-0801 (Japan); Marrelli, C.; Mostacci, A. [University of Rome Sapienza, Department of Fundamental and Applied Science for Engineering, Via A. Scarpa 14, 00185 Rome (Italy); Parodi, R. [INFN-Genova, Via Dodecaneso 33, 16146 Genova (Italy); Yeremian, A.D. [SLAC, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States)

    2011-11-21

    Two 11.424 GHz single cell standing wave accelerating structures have been fabricated for high gradient RF breakdown studies. Both are brazed structures: one made from copper and the other from sintered molybdenum bulk. The tests results are presented and compared to those of similar devices constructed at SLAC (Stanford Linear Accelerator Center) and KEK (Ko Enerugi Kasokuki Kenkyu Kiko). The technological issues to build both sections are discussed.

  6. Creating virtual communities of practice for learning technology in higher education: issues, challenges and experiences

    Directory of Open Access Journals (Sweden)

    Jacqueline A. Dempster

    2003-12-01

    Full Text Available The need for a Web portal to support the rapidly growing field of learning technology has been well established through a number of national surveys and scoping studies over recent years. The overarching vision has been the provision of a virtual environment to assist in informing and developing professional practice in the use of learning technologies. This paper outlines the issues and challenges in creating such a portal through the experiences of developing the RESULTs Network. In the paper, design and participation issues are considered within the wider context of online and networked approaches to supporting practice and professional development. User participation methodologies and technical developments for RESULTs are described in relation to a review of existing representations of practice and a comprehensive survey amongst the learning technology users' community. An outline of key achievements and experiences is presented, followed by some conclusions regarding the cultural and political issues in creating a viable and sustainable facility and suggestions for possible future direction in national provision.

  7. Impact of STS Issue Oriented Instruction on Pre-Service Elementary Teachers' Views and Perceptions of Science, Technology, and Society

    Science.gov (United States)

    Amirshokoohi, Aidin

    2016-01-01

    The purpose of the study was to investigate the impact of Science, Technology, Society (STS) issue oriented science methods course on pre-service teachers' views and perceptions toward STS issues and instruction as well as their levels of environmental literacy. The STS issue oriented curriculum was designed to help pre-service teachers improve…

  8. FINESSE: study of the issues, experiments and facilities for fusion nuclear technology research and development. Interim report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M.

    1984-10-01

    The Nuclear Fusion Issues chapter contains a comprehensive list of engineering issues for fusion reactor nuclear components. The list explicitly defines the uncertainties associated with the engineering option of a fusion reactor and addresses the potential consequences resulting from each issue. The next chapter identifies the fusion nuclear technology testing needs up to the engineering demonstration stage. (MOW)

  9. Energy Efficient Transient: Plasma Ignition: Physics and Technology

    Science.gov (United States)

    2007-08-30

    Wang from the University of Southern California on modeling the TPI-assisted combustion. The ethylene data taken on the PDE is intended to assist this...production of said species will assist in the development of a model for transient plasma ignition greatly. The plan for a two week experiment is to...Back-Lighted Thyratron ," 27th International Power Modulator Conference 2006, Washington, D.C., 14-18 May 2006. P.I. - Martin A. Gundersen "Energy

  10. [Plasma technology in the practice of orthodontics. 1].

    Science.gov (United States)

    Bol'shakov, G V; Batrak, I K; Mironov, A N; Spitsin, O V; Tarasenko, I V; Chistiakov, B N

    1995-01-01

    The paper describes the technique of plasma spraying used to fortify the coating of permanent dentures. This method helps improve the quality of permanent dentures and strengthen the adhesion of coatings on retention layers. Hence, dentures with very thin retention layer and vary strong coating adhesion can be made by traditional methods of denture making, thus improving the quality of prosthetic treatment. Traditional plastic may be used as coating material.

  11. Localisation of Information and Communication Technologies in Cameroonian Languages and Cultures:Experience and Issues

    Directory of Open Access Journals (Sweden)

    Mathurin Soh

    2015-12-01

    Full Text Available In this paper, we tackle the problem of adapting Information and Communication Technologies (ICTs in local languages of Cameroon. The objectives are to reduce the digital and language divides, and to pave the way for the usage of such technologies to local populations who don’t understand this technological language. We first discuss and highlight several concerns about the localisation of ICTs. Afterwords, we address some challenges and issues to computerize cultural and linguistic features, and indigenous knowledge (IK for national languages and cultures in Cameroon. As case study, we describe our experience in localising an open source editor for the Yemba language, within the of Rural Electronic Schools in African Languages Project. Because Cameroonian languages are based on the same basic alphabet, this qualitative research is extensible to other languages.

  12. Cold plasma: A new technology to modify wheat flour functionality

    Science.gov (United States)

    Bahrami, Niloufar; Bayliss, Danny; Chope, Gemma; Penson, Simon; Perehinec, Tania; Fisk, Ian D.

    2016-01-01

    Atmospheric pressure cold plasma has the potential to modify biological chemistry and modulate physical surface properties. Wheat flour was treated by low levels of cold plasma (air, 15 V and 20 V) for 60 or 120 s. There was no change in the total aerobic bacterial count or total mould count as a result of treatment. Treatment did not impact the concentration of total non-starch lipids, or non-polar and glycolipids. However, treatment did reduce total free fatty acids and phospholipids and was dose dependent. Oxidation markers (hydroperoxide value and head space n-hexanal) increased with treatment time and voltage, which confirmed the acceleration of lipid oxidation. Total proteins were not significantly influenced by treatment although there was a trend towards higher molecular weight fractions which indicated protein oxidation and treated flour did produce a stronger dough. This study confirms the potential of cold plasma as a tool to modify flour functionality. PMID:26920291

  13. Millimeter-wave imaging of magnetic fusion plasmas: technology innovations advancing physics understanding

    Science.gov (United States)

    Wang, Y.; Tobias, B.; Chang, Y.-T.; Yu, J.-H.; Li, M.; Hu, F.; Chen, M.; Mamidanna, M.; Phan, T.; Pham, A.-V.; Gu, J.; Liu, X.; Zhu, Y.; Domier, C. W.; Shi, L.; Valeo, E.; Kramer, G. J.; Kuwahara, D.; Nagayama, Y.; Mase, A.; Luhmann, N. C., Jr.

    2017-07-01

    Electron cyclotron emission (ECE) imaging is a passive radiometric technique that measures electron temperature fluctuations; and microwave imaging reflectometry (MIR) is an active radar imaging technique that measures electron density fluctuations. Microwave imaging diagnostic instruments employing these techniques have made important contributions to fusion science and have been adopted at major fusion facilities worldwide including DIII-D, EAST, ASDEX Upgrade, HL-2A, KSTAR, LHD, and J-TEXT. In this paper, we describe the development status of three major technological advancements: custom mm-wave integrated circuits (ICs), digital beamforming (DBF), and synthetic diagnostic modeling (SDM). These have the potential to greatly advance microwave fusion plasma imaging, enabling compact and low-noise transceiver systems with real-time, fast tracking ability to address critical fusion physics issues, including ELM suppression and disruptions in the ITER baseline scenario, naturally ELM-free states such as QH-mode, and energetic particle confinement (i.e. Alfvén eigenmode stability) in high-performance regimes that include steady-state and advanced tokamak scenarios. Furthermore, these systems are fully compatible with today’s most challenging non-inductive heating and current drive systems and capable of operating in harsh environments, making them the ideal approach for diagnosing long-pulse and steady-state tokamaks.

  14. Research and Development initiative of Satellite Technology Application for Environmental Issues in Asia Region

    Science.gov (United States)

    Hamamoto, K.; Kaneko, Y.; Sobue, S.; Oyoshi, K.

    2016-12-01

    Climate change and human activities are directly or indirectly influence the acceleration of environmental problems and natural hazards such as forest fires, drought and floods in the Asia-Pacific countries. Satellite technology has become one of the key information sources in assessment, monitoring and mitigation of these hazards and related phenomenon. However, there are still gaps between science and application of space technology in practical usage. Asia-Pacific Regional Space Agency Forum (APRSAF) recommended to initiate the Space Applications for Environment (SAFE) proposal providing opportunity to potential user agencies in the Asia Pacific region to develop prototype applications of space technology for number of key issues including forest resources management, coastal monitoring and management, agriculture and food security, water resource management and development user-friendly tools for application of space technology. The main activity of SAFE is SAFE prototyping. SAFE prototyping is a demonstration for end users and decision makers to apply space technology applications for solving environmental issues in Asia-Pacific region. By utilizing space technology and getting technical support by experts, prototype executers can develop the application system, which could support decision making activities. SAFE holds a workshop once a year. In the workshop, new prototypes are approved and the progress of on-going prototypes are confirmed. Every prototype is limited for two years period and all activities are operated by volunteer manner. As of 2016, 20 prototypes are completed and 6 prototypes are on-going. Some of the completed prototypes, for example drought monitoring in Indonesia were applied to operational use by a local official organization.

  15. Solution processed organic light-emitting diodes using the plasma cross-linking technology

    Science.gov (United States)

    He, Kongduo; Liu, Yang; Gong, Junyi; Zeng, Pan; Kong, Xun; Yang, Xilu; Yang, Cheng; Yu, Yan; Liang, Rongqing; Ou, Qiongrong

    2016-09-01

    Solution processed multilayer organic light-emitting diodes (OLEDs) present challenges, especially regarding dissolution of the first layer during deposition of a second layer. In this work, we first demonstrated a plasma cross-linking technology to produce a solution processed OLED. The surfaces of organic films can be cross-linked after mixed acetylene and Ar plasma treatment for several tens of seconds and resist corrosion of organic solvent. The film thickness and surface morphology of emissive layers (EMLs) with plasma treatment and subsequently spin-rinsed with chlorobenzene are nearly unchanged. The solution processed triple-layer OLED is successfully fabricated and the current efficiency increases 50% than that of the double-layer OLED. Fluorescent characteristics of EMLs are also observed to investigate factors influencing the efficiency of the triple-layer OLED. Plasma cross-linking technology may open up a new pathway towards fabrication of all-solution processed multilayer OLEDs and other soft electronic devices.

  16. Degradation of sulfur dioxide using plasma technology; Degradacion de dioxido de azufre empleando tecnologia de plasma

    Energy Technology Data Exchange (ETDEWEB)

    Estrada M, N.; Garcia E, R. [Instituto Tecnologico de Toluca, Av. Tecnologico s/n, Ex-Rancho La Virgen, 52140 Metepec, Estado de Mexico (Mexico); Pacheco P, M.; Valdivia B, R.; Pacheco S, J., E-mail: nadiaemz@yahoo.com.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2013-07-01

    This paper presents the electro-chemical study performed for sulfur dioxide (SO{sub 2}) treatment using non thermal plasma coupled to a nano structured fluid bed enhancing the toxic gas removal and the adsorption of acids formed during plasma treatment, more of 80% of removal was obtained. Non thermal plasma was ignited by dielectric barrier discharge (Dbd). The research was developed through an analysis of the chemical kinetics of the process and experimental study of degradation; in each experiment the electrical parameters and the influence of carbon nano structures were monitored to establish the optimal conditions of degradation. We compared the theoretical and experimental results to conclude whether the proposed model is correct for degradation. (Author)

  17. Application of plasma technology for the modification of polymer and textile materials

    Directory of Open Access Journals (Sweden)

    Radetić Maja M.

    2004-01-01

    Full Text Available Plasma treatment is based on the physico-chemical changes of the material surface and as an ecologically and economically acceptable process it can be an attractive alternative to conventional modifications. The possibilities of plasma technology application to the modification of polymer and textile materials are discussed. Different specific properties of the material can be achieved by plasma cleaning, etching, functionalization or polymerization. The final effects are strongly influenced by the treatment parameters (treatment time, pressure, power, gas flow, the applied gas and nature of the material. The plasma treatment of polymers is predominantly focused on cleaning and activation of the surfaces to increase adhesion, binding, wettability, dye ability and printability. Current studies deal more with plasma polymerization where an ultra thin film of plasma polymer is deposited on the material surface and, depending on the applied monomer, different specific properties can be obtained (i.e. chemical and thermal resistance, abrasion resistance, antireflexion, water repellence, etc.. Plasma application to textiles is mostly oriented toward wool and synthetic fibres, though some studies also consider cotton, hemp, flax and silk. The main goal of plasma treatment is to impart a more hydrophilic fibre surface and accordingly increase wettability, dye ability, printability and particularly, shrink resistance in the case of wool. Recent studies have favored technical textiles, where plasma polymerization can offer a wide range of opportunities.

  18. Analysis of the Mechanism and the Current Situation of the Plasma Purification Technology for Diesel Exhaust

    Directory of Open Access Journals (Sweden)

    Xiuli Guo

    2013-06-01

    Full Text Available In this study, the mechanism and the current situation of the plasma purification technology for diesel exhaust is introduced. Research indicates that cleaning the diesel exhaust with the plasma produced by corona discharge or dielectric barrier discharge has too high energy consumption to direct use without catalyst. To solve this problem, the study gives some new ways about cleaning diesel exhaust with arc discharge.

  19. [Use of plasma technology in treatment of patients with pyo-inflammatory diseases of soft tissues].

    Science.gov (United States)

    Khasanov, A G; Nikmatsianov, S S; Nurtdinov, M A; Bakiev, I M; Men'shikov, A M; Shaĭbakov, D G

    2007-01-01

    The authors substantiated the method of treatment of pyo-inflammatory diseases based on experiments in white rats, using plasma flow at different stages of the process. The plasma technology was used in the clinic in 130 patients that allowed shortening the period of preparing the wounds to operative treatment and reducing the period of hospital stay from 15.3 to 9.2 days, improving results of treatment by 20% and saving on expensive bandaging materials and medicines.

  20. A new type of plasma knife and its effect on biological issues--a pilot study.

    Science.gov (United States)

    Justan, I; Tichý, F; Slavícek, P

    2010-01-01

    Currently, several types of plasma discharge devices have become established for performing surgical procedures or superficial sterilization. Our goal is to introduce a brand new type of plasma discharge device with different characteristics, which we have used for two experiments involving thermal damage to biological tissues. A plasma discharge device with the following characteristics was used for all incisions in plasma group: radio frequency barrier discharger at atmospheric pressure with a working frequency of 13.56 MHz. The working gas was Argon. We used a Cesar 136 generator with typical power 100-150W and with a working gas flow rate between 0.5 and 3 litres per minute. The inner diameter of the end of the nozzle was 0.4mm. A standard Martin electrotome was used for all comparative incisions in the electrotome group. We used two experimental fresh rat cadavers, employing their skin, tails, lungs, livers, kidneys and spleens to make a comparative study between incisions made with a plasma discharge knife and those made with a standard electrotome device. All samples underwent histological verification. Our experiment showed slight differences in the impact on incision edges made by the plasma knife and the electrotome. The most interesting effect is on the skin: the plasma knife does not damage hair bulbs, and it results in less thermal damage. The plasma discharge knife is a promising device for cutting various biological tissues. Its effect can be compared with a standard electrotome, while in some tissues it causes less harm then an electrotome. Moreover, we can adjust its therapeutic effect. However, we do not consider the plasma knife a better choice at present, because maneuvering it is unwieldy.

  1. Semiconductor applications of plasma immersion ion implantation technology

    Indian Academy of Sciences (India)

    Mukesh Kumar; Rajkumar; Dinesh Kumar; P J George

    2002-11-01

    Many semiconductor integrated circuit manufacturing processes require high dose of implantation at very low energies. Conventional beam line ion implantation system suffers from low beam current at low energies, therefore, cannot be used economically for high dose applications. Plasma immersion ion implantation (PIII) is emerging as a potential technique for such implantations. This method offers high dose rate irrespective of implantation energy. In the present study nitrogen ions were implanted using PIII in order to modify the properties of silicon and some refractory metal films. Oxidation behaviour of silicon was observed for different implantation doses. Diffusion barrier properties of refractory barrier metals were studied for copper metallization.

  2. Refuse-derived Fuel Energy Recovery by Plasma Technology

    Directory of Open Access Journals (Sweden)

    Marián LÁZÁR

    2014-06-01

    Full Text Available The paper reports the results of experiments focused upon high temperature gasification of waste with a significant proportion of combustibles. This is refuse-derived fuel (RDF obtained by sorting the combustible components of communal waste. During the gasification of this waste in a plasma reactor (with a waste humidity of circa 24.9 %, when calculated per 1 kg of waste, syngas was obtained in an amount of 1.35 to 1.84 m3∙kg-1. Apart from gas, the gasification process also creates slag of a glassy structure suitable for further use.

  3. Electron impact ionization in plasma technologies; studies on atomic boron and BN molecule

    Science.gov (United States)

    Joshi, Foram M.; Joshipura, K. N.; Chaudhari, Asha S.

    2016-05-01

    Electron impact ionization plays important role in plasma technologies. Relevant cross sections on atomic boron are required to understand the erosion processes in fusion experiments. Boronization of plasma exposed surfaces of tokomaks has proved to be an effective way to produce very pure fusion plasmas. This paper reports comprehensive theoretical investigations on electron scattering with atomic Boron and Boron Nitride in solid phases. Presently we determine total ionization cross-section Qion and the summed-electronic excitation cross section ΣQexc in a standard quantum mechanical formalism called SCOP and CSP-ic methods. Our calculated cross sections are examined as functions of incident electron energy along with available comparisons.

  4. Recent developments in plasma spray processes for applications in energy technology

    Science.gov (United States)

    Mauer, G.; Jarligo, M. O.; Marcano, D.; Rezanka, S.; Zhou, D.; Vaßen, R.

    2017-03-01

    This work focuses on recent developments of plasma spray processes with respect to specific demands in energy technology. High Velocity Atmospheric Plasma Spraying (HV-APS) is a novel variant of plasma spraying devoted to materials which are prone to oxidation or decomposition. It is shown how this process can be used for metallic bondcoats in thermal barrier coating systems. Furthermore, Suspension Plasma Spraying (SPS) is a new method to process submicron-sized feedstock powders which are not sufficiently flowable to feed them in dry state. SPS is presently promoted by the development of novel torch concepts with axial feedstock injection. An example for a columnar structured double layer thermal barrier coating is given. Finally, Plasma Spray-Physical Vapor Deposition (PS-PVD) is a novel technology operating in controlled atmosphere at low pressure and high plasma power. At such condition, vaporization even of high-melting oxide ceramics is possible enabling the formation of columnar structured, strain tolerant coatings with low thermal conductivity. Applying different conditions, the deposition is still dominated by liquid splats. Such process is termed Low Pressure Plasma Spraying-Thin Film (LPPS-TF). Two examples of applications are gas-tight and highly ionic and electronic conductive electrolyte and membrane layers which were deposited on porous metallic substrates.

  5. Demonstration of Plasma Arc Environmental Technology Applications for the Demilitarization of DOD Stockpiles

    Science.gov (United States)

    Smith, Ed; Zaghloul, Hany; Filius, Krag; Rivers, Tim

    2000-01-01

    Since 1989 the U.S. Army Construction Engineering Research Laboratories (USACERL) have been active participants in the research and development toward establishing Plasma Arc Technology (PAT) as an efficient, economical, and safe hazardous waste immobilization tool. A plasma torch capable of generating high temperatures makes this technology a viable and powerful tool for the thermal destruction of various military industrial waste streams into an innocuous ceramic material no longer requiring hazardous waste landfill (Class 1) disposal. The emerging pl asma environmental thermal treatment process, has been used to safely and efficiently meet the waste disposal needs for various demilitarized components disposal needs, such as: pyrotechnic smoke assemblies, thermal batteries, proximity fuses, cartridge actuated devices (CAD's), and propellant actuated devices (PAD's). MSE Technology Applications, Inc., (MSE) has proposed and fabricated a Mobile Plasma Treatment System to be a technology demonstrator for pilot-scale mobile plasma waste processing. The system is capable of providing small-scale waste remediation services, and conducting waste stream applicability demonstrations. The Mobile Plasma Treatment System's innovative concept provides the flexibility to treat waste streams at numerous sites and sites with only a limited quantity of waste, yet too hazardous to transport to a regional fixed facility. The system was designed to be operated as skid mounted modules; consisting of a furnace module, controls module, offgas module, and ancillary systems module. All system components have been integrated to be operated from a single control station with both semi-continuous feeding and batch slag-pouring capability.

  6. Coblation technology: plasma-mediated ablation for otolaryngology applications

    Science.gov (United States)

    Woloszko, Jean; Gilbride, Charles

    2000-05-01

    Coblation is a unique method of delivering radio frequency energy to soft tissue for applications in Otolaryngology (ENT). Using radio frequency in a bipolar mode with a conductive solution, such as saline, Coblation energizes the ions in the saline to form a small plasma field. The plasma has enough energy to break the tissue's molecular bonds, creating an ablative path. The thermal effect of this process is approximately 45 - 85 degrees Celsius, significantly lower than traditional radio-frequency techniques. Coblation has been used for Otolaryngological applications such as Uvulopalatopharyngoplasty (UPPP), tonsillectomy, turbinate reduction, palate reduction, base of tongue reduction and various Head and Neck cancer procedures. The decreased thermal effect of Coblation anecdotally has led to less pain and faster recovery for cases where tissue is excised. In cases where Coblation is applied submucosally to reduce tissue volume (inferior turbinate, soft palate), the immediate volume reduction may lead to immediate clinical benefits for the patient. Coblation is currently being tested in various clinical studies to document the benefits for otolaryngological applications.

  7. Porous materials produced from incineration ash using thermal plasma technology.

    Science.gov (United States)

    Yang, Sheng-Fu; Chiu, Wen-Tung; Wang, To-Mai; Chen, Ching-Ting; Tzeng, Chin-Ching

    2014-06-01

    This study presents a novel thermal plasma melting technique for neutralizing and recycling municipal solid waste incinerator (MSWI) ash residues. MSWI ash residues were converted into water-quenched vitrified slag using plasma vitrification, which is environmentally benign. Slag is adopted as a raw material in producing porous materials for architectural and decorative applications, eliminating the problem of its disposal. Porous materials are produced using water-quenched vitrified slag with Portland cement and foaming agent. The true density, bulk density, porosity and water absorption ratio of the foamed specimens are studied here by varying the size of the slag particles, the water-to-solid ratio, and the ratio of the weights of the core materials, including the water-quenched vitrified slag and cement. The thermal conductivity and flexural strength of porous panels are also determined. The experimental results show the bulk density and the porosity of the porous materials are 0.9-1.2 g cm(-3) and 50-60%, respectively, and the pore structure has a closed form. The thermal conductivity of the porous material is 0.1946 W m(-1) K(-1). Therefore, the slag composite materials are lightweight and thermal insulators having considerable potential for building applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Online compositional analysis in coal gasification environment using laser-induced plasma technology

    Science.gov (United States)

    Deng, Kung-Li; Wu, Juntao; Wang, Zhe; Lee, Boon; Guida, Renato

    2006-08-01

    Integrated Gasification Combined Cycle (IGCC) power plants have great potential for future clean-coal power generation. Today, the quality of coal is measured by sampling coal using various offline methods, and the syn-gas composition is determined by taking samples downstream of the gasifier and measured by gas chromatograph (GC). Laser induced plasma technology has demonstrated high sensitivity for elementary detection. The capability of free space transmission and focusing of laser beam makes laser induced plasma a unique technology for online compositional analysis in coal gasification environment and optimization control.

  9. Extraction of human factors issues caused by application of the advanced HSI technology and development of human factor issue management system

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Sang Moon; Lee, Jung Woon; Park, Jae Chang; Oh, In Seok [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-01-01

    A comprehensive literature survey was performed in this study to collect human performance issues related to the advanced HSI design features. The literature from not only nuclear industry but also other industries was collected and reviewed. The issues were categorized into the following advanced HSI design features: devices characteristics, levels of automation, information design and management, display management, computerized controls, alarm systems, computerized procedures, staffing and crew coordination, and operator support systems. The classified issues were described with the description framework. Then, the relationship of issues to HSI design process such as human factors analyses, human factors design, and human factors verification and validation was investigated. Finally, the issue management system of server-client environment was developed using Microsoft's Active Server Page technology and Access 97. (author). 18 refs., 6 figs.

  10. Health information technology: medical record documentation issues in the electronic era.

    Science.gov (United States)

    Dacey, Bill; Bholat, Michelle Anne

    2012-12-01

    This article outlines the regulatory movement propelling physicians into the electronic health record environment and the subsequent emergence of quality issues in the medical record. There are benefits and downside risks for implementing electronic health records as part of the desire of a practice or institution to build patient-centered medical homes. The intersection of how a practice or institution collects and reports quality metrics using health information technology and subsequently submits claims for services rendered has created unforeseen challenges for which leadership must be aware and address proactively.

  11. Understandings of the nature of science and decision making on science and technology-based issues

    Science.gov (United States)

    Bell, Randy Lee

    Current reforms emphasize the development of scientific literacy as the principal goal of science education. The nature of science is considered a critical component of scientific literacy and is assumed to be an important factor in decision making on science and technology based issues. However, little research exists that delineates the role of the nature of science in decision making. The purpose of this investigation was to explicate the role of the nature of science in decision making on science and technology based issues and to delineate the reasoning and factors associated with these types of decisions. The 15-item, open-ended "Decision Making Questionnaire" (DMQ) based on four different scenarios concerning science and technology issues was developed to assess decision making. Twenty-one volunteer participants purposively selected from the faculty of geographically diverse universities completed the questionnaire and follow-up interviews. Participants were subsequently grouped according to their understandings of the nature of science, based on responses to a second open-ended questionnaire and follow-up interview. Profiles of each group's decision making were constructed, based on their previous responses to the DMQ and follow-up interviews. Finally, the two groups' decisions, decision making factors, and decision making strategies were compared. No differences were found between the decisions of the two groups, despite their disparate views of the nature of science. While their reasoning did not follow formal lines of argumentation, several influencing factors and general reasoning patterns were identified. Participants in both groups based their decisions primarily on personal values, morals/ethics, and social concerns. While all participants said they considered scientific evidence in their decision making, most did not require absolute "proof," even though Group B participants held more absolute conceptions of the nature of science. Overall, the

  12. Beyond the techno-thriller: Michael Crichton and societal issues in science and technology

    OpenAIRE

    Stengler, E.

    2015-01-01

    Michael Crichton is primarily known for being an outstanding writer of techno-thrillers and co-creator of the genre. In this paper I suggest that his fictional works can and should be considered under the deeper and wider perspective of his concern for societal issues regarding science and technology with a profound consideration of their effects and on the life of people and the development of society.\\ud \\ud In fact this defining feature of his work is inclusive of numerous works by Michael...

  13. Secure messaging via the cloud and mobile devices: data security issues emerge with new technologies.

    Science.gov (United States)

    Prestigiacomo, Jennifer

    2011-05-01

    The secure messaging space is alive with new innovations that are moving the industry forward. Key in this space is the push toward moving secure messaging to the cloud and pushing it out to mobile devices. Among the examples are solutions that allow physicians to receive encrypted email on mobile devices, as well as ones that allow doctors to securely text-message each other to coordinate care. However, the security issues around these emerging technologies in this very active space must be further explored.

  14. Biomedical, ethical, and moral issues being forced by advanced medical technologies.

    Science.gov (United States)

    Satava, Richard M

    2003-09-01

    Technology is rampant, exponentially growing beyond the bounds normally comprehensible by the human mind. Many of these technologies are so fundamentally disruptive that they challenge the very practice of science. Discoveries once unimaginable except in science fiction are appearing at such a rapid rate that there is no time to evaluate their moral and ethical implications in a deliberate and measured fashion. Genetic engineering, human cloning, tissue engineering, intelligent robotics, nanotechnology, suspended animation, regeneration, and species prolongation are but a few that will revolutionize what it means to be human and what the ultimate fate of the species may be. Unless these issues are addressed at this time, we shall face the consequences of an uncontrolled and unprepared future.

  15. Three-dimensional display technologies of recent interest: principles, status, and issues [Invited].

    Science.gov (United States)

    Hong, Jisoo; Kim, Youngmin; Choi, Hee-Jin; Hahn, Joonku; Park, Jae-Hyeung; Kim, Hwi; Min, Sung-Wook; Chen, Ni; Lee, Byoungho

    2011-12-01

    Recent trends in three-dimensional (3D) display technologies are very interesting in that both old-fashioned and up-to-date technologies are being actively investigated together. The release of the first commercially successful 3D display product raised new research topics in stereoscopic display. Autostereoscopic display renders a ray field of a 3D image, whereas holography replicates a wave field of it. Many investigations have been conducted on the next candidates for commercial products to resolve existing limitations. Up-to-date see-through 3D display is a concept close to the ultimate goal of presenting seamless virtual images. Although it is still far from practical use, many efforts have been made to resolve issues such as occlusion problems.

  16. Disabling and Enabling Technologies for Learning in Higher Education for All: Issues and Challenges for Whom?

    Directory of Open Access Journals (Sweden)

    Sangeeta Bagga-Gupta

    2016-10-01

    Full Text Available Integration, inclusion, and equity constitute fundamental dimensions of democracy in post-World War II societies and their institutions. The study presented here reports upon the ways in which individuals and institutions both use and account for the roles that technologies, including ICT, play in disabling and enabling access for learning in higher education for all. Technological innovations during the 20th and 21st centuries, including ICT, have been heralded as holding significant promise for revolutionizing issues of access in societal institutions like schools, healthcare services, etc. (at least in the global North. Taking a socially oriented perspective, the study presented in this paper focuses on an ethnographically framed analysis of two datasets that critically explores the role that technologies, including ICT, play in higher education for individuals who are “differently abled” and who constitute a variation on a continuum of capabilities. Functionality as a dimension of everyday life in higher education in the 21st century is explored through the analysis of (i case studies of two “differently abled” students in Sweden and (ii current support services at universities in Sweden. The findings make visible the work that institutions and their members do through analyses of the organization of time and space and the use of technologies in institutional settings against the backdrop of individuals’ accountings and life trajectories. This study also highlights the relevance of multi-scale data analyses for revisiting the ways in which identity positions become framed or understood within higher education.

  17. Sandia technology. Volume 13, number 2 Special issue : verification of arms control treaties.

    Energy Technology Data Exchange (ETDEWEB)

    1989-03-01

    Nuclear deterrence, a cornerstone of US national security policy, has helped prevent global conflict for over 40 years. The DOE and DoD share responsibility for this vital part of national security. The US will continue to rely on nuclear deterrence for the foreseeable future. In the late 1950s, Sandia developed satellite-borne nuclear burst detection systems to support the treaty banning atmospheric nuclear tests. This activity has continued to expand and diversify. When the Non-Proliferation Treaty was ratified in 1970, we began to develop technologies to protect nuclear materials from falling into unauthorized hands. This program grew and now includes systems for monitoring the movement and storage of nuclear materials, detecting tampering, and transmiting sensitive data securely. In the late 1970s, negotiations to further limit underground nuclear testing were being actively pursued. In less than 18 months, we fielded the National Seismic Station, an unattended observatory for in-country monitoring of nuclear tests. In the mid-l980s, arms-control interest shifted to facility monitoring and on-site inspection. Our Technical On-site Inspection Facility is the national test bed for perimeter and portal monitoring technology and the prototype for the inspection portal that was recently installed in the USSR under the Intermediate-Range Nuclear Forces accord. The articles in the special issue of Sundiu Technology describe some of our current contributions to verification technology. This work supports the US policy to seek realistic arms control agreements while maintaining our national security.

  18. Capture of dengue viruses using antibody-integrated graphite-encapsulated magnetic beads produced using gas plasma technology

    Science.gov (United States)

    SAKUDO, AKIKAZU; VISWAN, ANCHU; CHOU, HAN; SASAKI, TADAHIRO; IKUTA, KAZUYOSHI; NAGATSU, MASAAKI

    2016-01-01

    Despite significant advances in medicine, global health is threatened by emerging infectious diseases caused by a number of viruses. Dengue virus (DENV) is a mosquito-borne virus, which can be transmitted to humans via mosquito vectors. Previously, the Ministry of Health, Labour and Welfare in Japan reported the country's first domestically acquired case of dengue fever for almost 70 years. To address this issue, it is important to develop novel technologies for the sensitive detection of DENV. The present study reported on the development of plasma-functionalized, graphite-encapsulated magnetic nanoparticles (GrMNPs) conjugated with anti-DENV antibody for DENV capture. Radiofrequency wave-excited inductively-coupled Ar and ammonia gas plasmas were used to introduce amino groups onto the surface of the GrMNPs. The GrMNPs were then conjugated with an antibody against DENV, and the antibody-integrated magnetic beads were assessed for their ability to capture DENV. Beads incubated in a cell culture medium of DENV-infected mosquito cells were separated from the supernatant by applying a magnetic field and were then washed. The adsorption of DENV serotypes 1–4 onto the beads was confirmed using reverse transcription-polymerase chain reaction, which detected the presence of DENV genomic RNA on the GrMNPs. The methodology described in the present study, which employed the plasma-functionalization of GrMNPs to enable antibody-integration, represents a significant improvement in the detection of DENV. PMID:27221214

  19. Capture of dengue viruses using antibody-integrated graphite-encapsulated magnetic beads produced using gas plasma technology.

    Science.gov (United States)

    Sakudo, Akikazu; Viswan, Anchu; Chou, Han; Sasaki, Tadahiro; Ikuta, Kazuyoshi; Nagatsu, Masaaki

    2016-07-01

    Despite significant advances in medicine, global health is threatened by emerging infectious diseases caused by a number of viruses. Dengue virus (DENV) is a mosquito‑borne virus, which can be transmitted to humans via mosquito vectors. Previously, the Ministry of Health, Labour and Welfare in Japan reported the country's first domestically acquired case of dengue fever for almost 70 years. To address this issue, it is important to develop novel technologies for the sensitive detection of DENV. The present study reported on the development of plasma-functionalized, graphite-encapsulated magnetic nanoparticles (GrMNPs) conjugated with anti-DENV antibody for DENV capture. Radiofrequency wave‑excited inductively‑coupled Ar and ammonia gas plasmas were used to introduce amino groups onto the surface of the GrMNPs. The GrMNPs were then conjugated with an antibody against DENV, and the antibody‑integrated magnetic beads were assessed for their ability to capture DENV. Beads incubated in a cell culture medium of DENV‑infected mosquito cells were separated from the supernatant by applying a magnetic field and were then washed. The adsorption of DENV serotypes 1‑4 onto the beads was confirmed using reverse transcription‑polymerase chain reaction, which detected the presence of DENV genomic RNA on the GrMNPs. The methodology described in the present study, which employed the plasma-functionalization of GrMNPs to enable antibody‑integration, represents a significant improvement in the detection of DENV.

  20. Defining core issues in utilizing information technology to improve access: evaluation and research agenda.

    Science.gov (United States)

    Jackson, George L; Krein, Sarah L; Alverson, Dale C; Darkins, Adam W; Gunnar, William; Harada, Nancy D; Helfrich, Christian D; Houston, Thomas K; Klobucar, Thomas F; Nazi, Kim M; Poropatich, Ronald K; Ralston, James D; Bosworth, Hayden B

    2011-11-01

    The Department of Veterans Affairs (VA) has been at the vanguard of information technology (IT) and use of comprehensive electronic health records. Despite the widespread use of health IT in the VA, there are still a variety of key questions that need to be answered in order to maximize the utility of IT to improve patient access to quality services. This paper summarizes the potential of IT to enhance healthcare access, key gaps in current evidence linking IT and access, and methodologic challenges for related research. We also highlight four key issues to be addressed when implementing and evaluating the impact of IT interventions on improving access to quality care: 1) Understanding broader needs/perceptions of the Veteran population and their caregivers regarding use of IT to access healthcare services and related information. 2) Understanding individual provider/clinician needs/perceptions regarding use of IT for patient access to healthcare. 3) System/Organizational issues within the VA and other organizations related to the use of IT to improve access. 4) IT integration and information flow with non-VA entities. While the VA is used as an example, the issues are salient for healthcare systems that are beginning to take advantage of IT solutions.

  1. Issues Arising from Plasma-Wall Interactions in Inner-Class Tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Wampler, William R.

    1999-06-23

    This section reviews physical processes involved in the implantation of energetic hydrogen into plasma facing materials and its subsequent diffusion, release, or immobilization by trapping or precipitation within the material. These topics have also been discussed in previous reviews. The term hydrogen or H is used here generically to refer to protium, deuterium or tritium.

  2. Non-thermal plasma based technologies for the after-treatment of automotive exhaust particulates and marine diesel exhaust NOx

    Energy Technology Data Exchange (ETDEWEB)

    McAdams, R; Beech, P; Gillespie, R; Guy, C; Jones,S; Liddell, T; Morgan, R; Shawcross, J; Weeks, D; Hughes, D; Oesterle, J; Eberspdcher,

    2003-08-24

    The trend in environmental legislation is such that primary engine modifications will not be sufficient to meet all future emissions requirements and exhaust aftertreatment technologies will need to be employed. One potential solution that is well placed to meet those requirements is non-thermal plasma technology. This paper will describe our work with some of our partners in the development of a plasma based diesel particulate filter (DPF) and plasma assisted catalytic reduction (PACR) for NOx removal. This paper describes the development of non-thermal plasma technology for the aftertreatment of particulates from a passenger car engine and NOx from a marine diesel exhaust application.

  3. The present-day state and outlooks of using plasma-energy technologies in heat power industry

    Energy Technology Data Exchange (ETDEWEB)

    Karpenko, E.; Messerle, V.; Buyantuev, S. [J.S. Co. `Gusinoozyorsk SDPS`, Gusinoozyorsk (Russian Federation)

    1997-12-31

    The urgency of using plasma-energy technologies in the power industry is outlined with the aim of increasing economical efficiency, decreasing of energy consumption and decreasing environmental pollution. Scientific and technical bases for plasma-energy technologies of fuel utilization, are presented, with results of theoretical, experimental and rig investigations of processes of plasma ignition, gasification, thermochemical preparation for burning and combined processing of coals. Results of realization of plasma technologies of residual-oil-free (mazout) pulverized coal boiler kindling, lighting of torch and stabilization of fluid slagging in furnaces with removal of fluid slag, are described. 6 refs.,1 fig., 2 tabs.

  4. The ethical, legal, and social issues impacted by modern assisted reproductive technologies.

    Science.gov (United States)

    Brezina, Paul R; Zhao, Yulian

    2012-01-01

    Background. While assisted reproductive technology (ART), including in vitro fertilization has given hope to millions of couples suffering from infertility, it has also introduced countless ethical, legal, and social challenges. The objective of this paper is to identify the aspects of ART that are most relevant to present-day society and discuss the multiple ethical, legal, and social challenges inherent to this technology. Scope of Review. This paper evaluates some of the most visible and challenging topics in the field of ART and outlines the ethical, legal, and social challenges they introduce. Major Conclusions. ART has resulted in a tectonic shift in the way physicians and the general population perceive infertility and ethics. In the coming years, advancing technology is likely to exacerbate ethical, legal, and social concerns associated with ART. ART is directly challenging society to reevaluate the way in which human life, social justice and equality, and claims to genetic offspring are viewed. Furthermore, these issues will force legal systems to modify existing laws to accommodate the unique challenges created by ART. Society has a responsibility to ensure that the advances achieved through ART are implemented in a socially responsible manner.

  5. The technology and science of steady-state operation in magnetically confined plasmas

    Science.gov (United States)

    Bécoulet, A.; Hoang, G. T.

    2008-12-01

    The steady-state operation of magnetically confined fusion plasmas is considered as one of the 'grand challenges' of future decades, if not the ultimate goal of the research and development activities towards a new source of energy. Reaching such a goal requires the high-level integration of both science and technology aspects of magnetic fusion into self-consistent plasma regimes in fusion-grade devices. On the physics side, the first constraint addresses the magnetic confinement itself which must be made persistent. This means to either rely on intrinsically steady-state configurations, like the stellarator one, or turn the inductively driven tokamak configuration into a fully non-inductive one, through a mix of additional current sources. The low efficiency of the external current drive methods and the necessity to minimize the re-circulating power claim for a current mix strongly weighted by the internal 'pressure driven' bootstrap current, itself strongly sensitive to the heat and particle transport properties of the plasma. A virtuous circle may form as the heat and particle transport properties are themselves sensitive to the current profile conditions. Note that several other factors, e.g. plasma rotation profile, magneto-hydro-dynamics activity, also influence the equilibrium state. In the present tokamak devices, several examples of such 'advanced tokamak' physics research demonstrate the feasibility of steady-state regimes, though with a number of open questions still under investigation. The modelling activity also progresses quite fast in this domain and supports understanding and extrapolation. This high level of physics sophistication of the plasma scenario however needs to be combined with steady-state technological constraints. The technology constraints for steady-state operation are basically twofold: the specific technologies required to reach the steady-state plasma conditions and the generic technologies linked to the long pulse operation of a

  6. Welding of titanium and nickel alloy by combination of explosive welding and spark plasma sintering technologies

    Energy Technology Data Exchange (ETDEWEB)

    Malyutina, Yu. N., E-mail: iuliiamaliutina@gmail.com; Bataev, A. A., E-mail: bataev@adm.nstu.ru; Shevtsova, L. I., E-mail: edeliya2010@mail.ru [Novosibirsk State Technical University, Novosibirsk, 630073 (Russian Federation); Mali, V. I., E-mail: vmali@mail.ru; Anisimov, A. G., E-mail: anis@hydro.nsc.ru [Lavrentyev Institute of Hydrodynamics SB RAS, Novosibirsk, 630090 (Russian Federation)

    2015-10-27

    A possibility of titanium and nickel-based alloys composite materials formation using combination of explosive welding and spark plasma sintering technologies was demonstrated in the current research. An employment of interlayer consisting of copper and tantalum thin plates makes possible to eliminate a contact between metallurgical incompatible titanium and nickel that are susceptible to intermetallic compounds formation during their interaction. By the following spark plasma sintering process the bonding has been received between titanium and titanium alloy VT20 through the thin powder layer of pure titanium that is distinguished by low defectiveness and fine dispersive structure.

  7. Welding of titanium and nickel alloy by combination of explosive welding and spark plasma sintering technologies

    Science.gov (United States)

    Malyutina, Yu. N.; Bataev, A. A.; Mali, V. I.; Anisimov, A. G.; Shevtsova, L. I.

    2015-10-01

    A possibility of titanium and nickel-based alloys composite materials formation using combination of explosive welding and spark plasma sintering technologies was demonstrated in the current research. An employment of interlayer consisting of copper and tantalum thin plates makes possible to eliminate a contact between metallurgical incompatible titanium and nickel that are susceptible to intermetallic compounds formation during their interaction. By the following spark plasma sintering process the bonding has been received between titanium and titanium alloy VT20 through the thin powder layer of pure titanium that is distinguished by low defectiveness and fine dispersive structure.

  8. Modeling and simulation of ion energy distribution functions in technological plasmas

    CERN Document Server

    Mussenbrock, Thomas

    2011-01-01

    The highly advanced treatment of surfaces as etching and deposition is mainly enabled by the extraordinary properties of technological plasmas. The primary factors that influence these processes are the flux and the energy of various species, particularly ions, that impinge the substrate surface. These features can be theoretically described using the ion energy distribution function (IEDF). The article is intended to summarize the fundamental concepts of modeling and simulation of IEDFs from simplified models to self-consistent plasma simulations. Finally, concepts for controlling the IEDF are discussed.

  9. The Science and Technology Challenges of the Plasma-Material Interface for Magnetic Fusion Energy

    Science.gov (United States)

    Whyte, Dennis

    2013-09-01

    The boundary plasma and plasma-material interactions of magnetic fusion devices are reviewed. The boundary of magnetic confinement devices, from the high-temperature, collisionless pedestal through to the surrounding surfaces and the nearby cold high-density collisional plasmas, encompasses an enormous range of plasma and material physics, and their integrated coupling. Due to fundamental limits of material response the boundary will largely define the viability of future large MFE experiments (ITER) and reactors (e.g. ARIES designs). The fusion community faces an enormous knowledge deficit in stepping from present devices, and even ITER, towards fusion devices typical of that required for efficient energy production. This deficit will be bridged by improving our fundamental science understanding of this complex interface region. The research activities and gaps are reviewed and organized to three major axes of challenges: power density, plasma duration, and material temperature. The boundary can also be considered a multi-scale system of coupled plasma and material science regulated through the non-linear interface of the sheath. Measurement, theory and modeling across these scales are reviewed, with a particular emphasis on establishing the use dimensionless parameters to understand this complex system. Proposed technology and science innovations towards solving the PMI/boundary challenges will be examined. Supported by US DOE award DE-SC00-02060 and cooperative agreement DE-FC02-99ER54512.

  10. Process systems engineering issues and applications towards reducing carbon dioxide emissions through conversion technologies

    DEFF Research Database (Denmark)

    Roh, Kosan; Frauzem, Rebecca; Gani, Rafiqul

    2016-01-01

    This paper reviews issues and applications for design of sustainable carbon dioxide conversion processes, specifically through chemical conversion, and the integration of the conversion processes with other systems from a process systems engineering (PSE) view-point. Systematic and computer......-aided methods and tools for reaction network generation, processing route generation, process design/optimization, and sustainability analysis are reviewed with respect to carbon dioxide conversion. Also, the relevant gaps and opportunities are highlighted. In addition, the integration of carbon dioxide...... conversion processes with other systems including coexisting infrastructure and carbon dioxide sources is described.Then, the importance of PSE based studies for such application is discussed. Finally, some perspectives on the status and future directions of carbon dioxide conversion technology...

  11. Issues and Considerations regarding Sharable Data Sets for Recommender Systems in Technology Enhanced Learning

    DEFF Research Database (Denmark)

    Drachsler, Hendrik; Bogers, Toine; Vuorikari, Riina

    2010-01-01

    This paper raises the issue of missing standardised data sets for recommender systems in Technology Enhanced Learning (TEL) that can be used as benchmarks to compare different recommendation approaches. It discusses how suitable data sets could be created according to some initial suggestions......, and investigates a number of steps that may be followed in order to develop reference data sets that will be adopted and reused within a scientific community. In addition, policies are discussed that are needed to enhance sharing of data sets by taking into account legal protection rights. Finally, an initial...... elaboration of a representation and exchange format for sharable TEL data sets is carried out. The paper concludes with future research needs....

  12. Silent Discharge Plasma Technology for the Treatment of Air Toxics and Other Applications

    Energy Technology Data Exchange (ETDEWEB)

    Rosocha, Louis A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Chase, Peter J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gross, Michael P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    1998-09-21

    Under this CRADA, the Los Alamos National Laboratory (LANL) and High Mesa Technologies, Inc. (HMT) carried out a joint project on the development of the silent discharge plasma (SDP) technology for the treatment of hazardous air pollutants and other hazardous or toxic chemicals. The project had two major components: a technology-demonstration part and a scale-up and commercialization part. In the first part, a small-scale, mobile SDP plasma processor, which was being developed under a CRADA with the Electric Power Research Institute (EPRI) was the mobile equipment was modified for higher capacity service and employed for an innovative remediation technologies demonstration on soil-vapor extraction off-gases at the McClellan Air Force Base near Sacramento, CA. The performance of the SDP system for the variety of volatile organic compounds (VOCs) encountered at the McClellan site was sufficiently promising to the project HMT and LANL worked together to formulate a scale-up strategy and commercialization/manufacturing plan, and to design a prototype scaled-up SDP unit. HMT and LANL are now in the final stages of completing a licensing agreement for the technology and HMT is in the process of raising funds to engineer and manufacture commercial prototype SDP equipment focused on stack-gas emissions control and environmental remediation. HMT, in collaboration with another Northern New Mexico business, Coyote Aerospace, has also been successful in receiving a Phase I Small Business Innovative Research (SBIR) award from the Army Research Office to develop, design, and construct a small non-thermal plasma reactor for laboratory studies ("Non-Thermal Plasma Reactor for Control of Fugitive Emissions of Toxic Gases")

  13. Toward Successful Implementation of Speech Recognition Technology: A Survey of SRT Utilization Issues in Healthcare Settings.

    Science.gov (United States)

    Clarke, Martina A; King, Joshua L; Kim, Min Soon

    2015-07-01

    To evaluate physician utilization of speech recognition technology (SRT) for medical documentation in two hospitals. A quantitative survey was used to collect data in the areas of practice, electronic equipment used for documentation, documentation created after providing care, and overall thoughts about and satisfaction with the SRT. The survey sample was from one rural and one urban facility in central Missouri. In addition, qualitative interviews were conducted with a chief medical officer and a physician champion regarding implementation issues, training, choice of SRT, and outcomes from their perspective. Seventy-one (60%) of the anticipated 125 surveys were returned. A total of 16 (23%) participants were practicing in internal medicine and 9 (13%) were practicing in family medicine. Fifty-six (79%) participants used a desktop and 14 (20%) used a laptop (2%) computer. SRT products from Nuance were the dominant SRT used by 59 participants (83%). Windows operating systems (Microsoft, Redmond, WA) was used by more than 58 (82%) of the survey respondents. With regard to user experience, 42 (59%) participants experienced spelling and grammatical errors, 15 (21%) encountered clinical inaccuracy, 9 (13%) experienced word substitution, and 4 (6%) experienced misleading medical information. This study shows critical issues of inconsistency, unreliability, and dissatisfaction in the functionality and usability of SRT. This merits further attention to improve the functionality and usability of SRT for better adoption within varying healthcare settings.

  14. Next-generation biofuels: Survey of emerging technologies and sustainability issues.

    Science.gov (United States)

    Zinoviev, Sergey; Müller-Langer, Franziska; Das, Piyali; Bertero, Nicolás; Fornasiero, Paolo; Kaltschmitt, Martin; Centi, Gabriele; Miertus, Stanislav

    2010-10-25

    Next-generation biofuels, such as cellulosic bioethanol, biomethane from waste, synthetic biofuels obtained via gasification of biomass, biohydrogen, and others, are currently at the center of the attention of technologists and policy makers in search of the more sustainable biofuel of tomorrow. To set realistic targets for future biofuel options, it is important to assess their sustainability according to technical, economical, and environmental measures. With this aim, the review presents a comprehensive overview of the chemistry basis and of the technology related aspects of next generation biofuel production, as well as it addresses related economic issues and environmental implications. Opportunities and limits are discussed in terms of technical applicability of existing and emerging technology options to bio-waste feedstock, and further development forecasts are made based on the existing social-economic and market situation, feedstock potentials, and other global aspects. As the latter ones are concerned, the emphasis is placed on the opportunities and challenges of developing countries in adoption of this new industry.

  15. Challenges in the Plasma Etch Process Development in the sub-20nm Technology Nodes

    Science.gov (United States)

    Kumar, Kaushik

    2013-09-01

    For multiple generations of semiconductor technologies, RF plasmas have provided a reliable platform for critical and non-critical patterning applications. The electron temperature of processes in a RF plasma is typically several electron volts. A substantial portion of the electron population is within the energy range accessible for different types of electron collision processes, such as electron collision dissociation and dissociative electron attachment. When these electron processes occur within a small distance above the wafer, the neutral species, radicals and excited molecules, generated from these processes take part in etching reactions impacting selectivity, ARDE and micro-loading. The introduction of finFET devices at 22 nm technology node at Intel marks the transition of planar devices to 3-dimensional devices, which add to the challenges to etch process in fabricating such devices. In the sub-32 nm technology node, Back-end-of-the-line made a change with the implementation of Trench First Metal Hard Mask (TFMHM) integration scheme, which has hence gained traction and become the preferred integration of low-k materials for BEOL. This integration scheme also enables Self-Aligned Via (SAV) patterning which prevents via CD growth and confines via by line trenches to better control via to line spacing. In addition to this, lack of scaling of 193 nm Lithography and non-availability of EUV based lithography beyond concept, has placed focus on novel multiple patterning schemes. This added complexity has resulted in multiple etch schemes to enable technology scaling below 80 nm Pitches, as shown by the memory manufacturers. Double-Patterning and Quad-Patterning have become increasingly used techniques to achieve 64 nm, 56 nm and 45 nm Pitch technologies in Back-end-of-the-line. Challenges associated in the plasma etching of these multiple integration schemes will be discussed in the presentation. In collaboration with A. Ranjan, TEL Technology Center, America

  16. Production of coloured glass-ceramics from incinerator ash using thermal plasma technology.

    Science.gov (United States)

    Cheng, T W; Huang, M Z; Tzeng, C C; Cheng, K B; Ueng, T H

    2007-08-01

    Incineration is a major treatment process for municipal solid waste in Taiwan. It is estimated that over 1.5 Mt of incinerator ash are produced annually. This study proposes using thermal plasma technology to treat incinerator ash. Sintered glass-ceramics were produced using quenched vitrified slag with colouring agents added. The experimental results showed that the major crystalline phases developed in the sintered glass-ceramics were gehlenite and wollastonite, but many other secondary phases also appeared depending on the colouring agents added. The physical/mechanical properties, chemical resistance and toxicity characteristic leaching procedure of the coloured glass-ceramics were satisfactory. The glass-ceramic products obtained from incinerator ash treated with thermal plasma technology have great potential for building applications.

  17. Optimized condition for etching fused-silica phase gratings with inductively coupled plasma technology.

    Science.gov (United States)

    Wang, Shunquan; Zhou, Changhe; Ru, Huayi; Zhang, Yanyan

    2005-07-20

    Polymer deposition is a serious problem associated with the etching of fused silica by use of inductively coupled plasma (ICP) technology, and it usually prevents further etching. We report an optimized etching condition under which no polymer deposition will occur for etching fused silica with ICP technology. Under the optimized etching condition, surfaces of the fabricated fused silica gratings are smooth and clean. Etch rate of fused silica is relatively high, and it demonstrates a linear relation between etched depth and working time. Results of the diffraction of gratings fabricated under the optimized etching condition match theoretical results well.

  18. [Use of fractional plasma separation and adsorption (Prometheus technology) in the treatment of acute liver failure].

    Science.gov (United States)

    Denisova, E N; Sharipova, V R; Purlo, N V; Sukhanova, G A; Biriukova, L S

    2009-01-01

    This paper presents the results of treating 8 patients with acute liver failure, by using the separation and adsorption of fractional plasma (Prometheus technology). Twenty-five procedures lasting 5-6 hours were performed. Anticoagulation with heparin was made under guidance of coagulogram parameters. The results of testing blood parameters before and after a procedure and hemodynamic parameters are given. The investigations have demonstrated the effectiveness and safety of the procedure.

  19. A review on technologies and their usage in solid waste monitoring and management systems: Issues and challenges.

    Science.gov (United States)

    Hannan, M A; Abdulla Al Mamun, Md; Hussain, Aini; Basri, Hassan; Begum, R A

    2015-09-01

    In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challenges towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system.

  20. Cold plasma technology: bactericidal effects on Geobacillus stearothermophilus and Bacillus cereus microorganisms.

    Science.gov (United States)

    Morris, Angela D; McCombs, Gayle B; Akan, Tamer; Hynes, Wayne; Laroussi, Mounir; Tolle, Susan L

    2009-01-01

    Cold plasma, also known as Low Temperature Atmospheric Pressure Plasma (LTAPP) is a novel technology consisting of neutral and charged particles, including free radicals, which can be used to destroy or inactivate microorganisms. Research has been conducted regarding the effect of cold plasma on gram-positive bacteria; however, there is limited research regarding its ability to inactivate the spore-formers Geobacillus stearothermophilus and Bacillus cereus. The purpose of this study was to determine if cold plasma inactivates G. stearothermophilus and B. cereus vegetative cells and spores. Nine hundred eighty-one samples were included in this study (762 experimental and 219 controls). Experimental samples were exposed indirectly or directly to cold plasma, before plating and incubating for 16 hours. Control samples were not exposed to cold plasma. The percentage-kill and cell number reductions were calculated from Colony Forming Units (CFU). Data were statistically analyzed at the .05 level using one-way ANOVA, Kruskal Wallis and Tukey's tests. There was a statistically significant difference in the inactivation of G. stearothermophilus vegetative cells receiving indirect and direct exposure (p=0.0001 and p=0.0013, respectively), as well as for B. cereus vegetative cells and spores (p=0.0001 for direct and indirect). There was no statistically significant difference in the inactivation of G. stearothermophilus spores receiving indirect exposure (p=0.7208) or direct exposure (p=0.0835). Results demonstrate that cold plasma exposure effectively kills G. stearothermophilus vegetative cells and B. cereus vegetative cells and spores; however, G. stearothermophilus spores were not significantly inactivated.

  1. Young men's health promotion and new information communication technologies: illuminating the issues and research agendas.

    Science.gov (United States)

    Robinson, Mark; Robertson, Steve

    2010-09-01

    The article examines the use of newer, interactive information and communication technologies (ICTs) in young men's health promotion (HP), drawing on gender theory, HP research and evidence on young men's Internet usage. The focus is on highlighting an agenda for research in terms of emerging issues. New forms of social media ICT (for example 'web 2'-based on-line social networking sites, micro-blogging services, i-phones and podcasts) have the potential to enable young men to engage with health information in new and interesting ways. Given concerns about young men's engagement with health services, innovative ICT formats, particularly using the Internet, have been tried. However, issues persist around surfing 'addiction', quality control and equal access. Approaches to HP using new ICTs offer distributed control over information content and quality and a lay social context for accessing information. Online communities can potentially legitimize young men's participation in discourses around health, and support sustained engagement. The article discusses how this could support young men to re-conceptualize healthy choices in the context of masculine imperatives and responsible citizenship if specific conditions are met (for trusting engagement) and risks addressed (such as commercial disinformation). The skill requirements for young men to engage effectively with new ICTs are explored, focusing on health literacy (HL). It is predicted that social marketing approaches to HP for young men will increasingly include new ICTs, making specific requirements for HL. These approaches may appeal narrowly to hegemonic masculinities or broadly to multiple masculinities, including those historically marginalized. Recommendations are made for future research.

  2. Building Irish families through surrogacy: medical and judicial issues for the advanced reproductive technologies.

    LENUS (Irish Health Repository)

    Sills, Eric Scott

    2008-01-01

    Surrogacy involves one woman (surrogate mother) carrying a child for another person\\/s (commissioning person\\/couple), based on a mutual agreement requiring the child to be handed over to the commissioning person\\/couple following birth. Reasons for seeking surrogacy include situations where a woman has non-functional or absent reproductive organs, or as a remedy for recurrent pregnancy loss. Additionally, surrogacy may find application in any medical context where pregnancy is contraindicated, or where a couple consisting of two males seek to become parents through oocyte donation. Gestational surrogacy is one of the main issues at the forefront of bioethics and the advanced reproductive technologies, representing an important challenge to medical law. This analysis reviews the history of surrogacy and clinical and legal issues pertaining to this branch of reproductive medicine. Interestingly, the Medical Council of Ireland does not acknowledge surrogacy in its current practice guidelines, nor is there specific legislation addressing surrogacy in Ireland at present. We therefore have developed a contract-based model for surrogacy in which, courts in Ireland may consider when confronted with a surrogacy dispute, and formulated a system to resolve any potential dispute arising from a surrogacy arrangement. While the 2005 report by the Commission on Assisted Human Reproduction (CAHR) is an expert opinion guiding the Oireachtas\\' development of specific legislation governing assisted human reproduction and surrogacy, our report represents independent scholarship on the contractual elements of surrogacy with particular focus on how Irish courts might decide on surrogacy matters in a modern day Ireland. This joint medico-legal collaborative also reviews the contract for services arrangement between the commissioning person\\/s and the surrogate, and the extent to which the contract may be enforced.

  3. A review on technologies and their usage in solid waste monitoring and management systems: Issues and challenges

    Energy Technology Data Exchange (ETDEWEB)

    Hannan, M.A., E-mail: hannan@eng.ukm.my [Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia); Abdulla Al Mamun, Md., E-mail: md.abdulla@siswa.ukm.edu.my [Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia); Hussain, Aini, E-mail: aini@eng.ukm.my [Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia); Basri, Hassan, E-mail: drhb@ukm.my [Department of Civil and Structural Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia); Begum, R.A., E-mail: rawshan@ukm.edu.my [Institute of Climate Change, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia)

    2015-09-15

    Highlights: • Classification of available technologies for SWM system in four core category. • Organization of technology based SWM systems in three main groups. • Summary of SWM systems with target application, methodology and functional domain. • Issues and challenges are highlighted for further design of a sustainable system. - Abstract: In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challenges towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system.

  4. IEA Wind Task 23 Offshore Wind Technology and Deployment. Subtask 1 Experience with Critical Deployment Issues. Final Technical Report

    OpenAIRE

    Lemming, Jørgen Kjærgaard

    2010-01-01

    The final report for IEA Wind Task 23, Offshore Wind Energy Technology and Deployment, is made up of two separate reports: Subtask 1: Experience with Critical Deployment Issues and Subtask 2: Offshore Code Comparison Collaborative (OC3). The Subtask 1 report included here provides background information and objectives of Task 23. It specifically discusses ecological issues and regulation, electrical system integration and offshore wind, external conditions, and key conclusions for Subtask 1. ...

  5. The Ministry of Industry and Information Technology Issued Detail Breakdown on the Tasks to Eliminate 2009 Backward Production Capacity

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ In order to implement the spirit of "The Announcement from the State Council about Issuing the 2009 Work Plan on Energy-Saving and Emission-Reduction" and the adjustment and revitalization plan for key industries, and further improve the work to eliminate backward production capacity, the Ministry of Industry and Information Technology issued a notice on the detail breakdown and implementation of tasks to eliminate 2009 backward production capacity on November 25, 2009.

  6. Outsourcing medical data analyses: can technology overcome legal, privacy, and confidentiality issues?

    Science.gov (United States)

    Brumen, Bostjan; Heričko, Marjan; Sevčnikar, Andrej; Završnik, Jernej; Hölbl, Marko

    2013-12-16

    Medical data are gold mines for deriving the knowledge that could change the course of a single patient's life or even the health of the entire population. A data analyst needs to have full access to relevant data, but full access may be denied by privacy and confidentiality of medical data legal regulations, especially when the data analyst is not affiliated with the data owner. Our first objective was to analyze the privacy and confidentiality issues and the associated regulations pertaining to medical data, and to identify technologies to properly address these issues. Our second objective was to develop a procedure to protect medical data in such a way that the outsourced analyst would be capable of doing analyses on protected data and the results would be comparable, if not the same, as if they had been done on the original data. Specifically, our hypothesis was there would not be a difference between the outsourced decision trees built on encrypted data and the ones built on original data. Using formal definitions, we developed an algorithm to protect medical data for outsourced analyses. The algorithm was applied to publicly available datasets (N=30) from the medical and life sciences fields. The analyses were performed on the original and the protected datasets and the results of the analyses were compared. Bootstrapped paired t tests for 2 dependent samples were used to test whether the mean differences in size, number of leaves, and the accuracy of the original and the encrypted decision trees were significantly different. The decision trees built on encrypted data were virtually the same as those built on original data. Out of 30 datasets, 100% of the trees had identical accuracy. The size of a tree and the number of leaves was different only once (1/30, 3%, P=.19). The proposed algorithm encrypts a file with plain text medical data into an encrypted file with the data protected in such a way that external data analyses are still possible. The results

  7. Plasma-based ion implantation and deposition: A review of physics,technology, and applications

    Energy Technology Data Exchange (ETDEWEB)

    Pelletier, Jacques; Anders, Andre

    2005-05-16

    After pioneering work in the 1980s, plasma-based ion implantation (PBII) and plasma-based ion implantation and deposition (PBIID) can now be considered mature technologies for surface modification and thin film deposition. This review starts by looking at the historical development and recalling the basic ideas of PBII. Advantages and disadvantages are compared to conventional ion beam implantation and physical vapor deposition for PBII and PBIID, respectively, followed by a summary of the physics of sheath dynamics, plasma and pulse specifications, plasma diagnostics, and process modeling. The review moves on to technology considerations for plasma sources and process reactors. PBII surface modification and PBIID coatings are applied in a wide range of situations. They include the by-now traditional tribological applications of reducing wear and corrosion through the formation of hard, tough, smooth, low-friction and chemically inert phases and coatings, e.g. for engine components. PBII has become viable for the formation of shallow junctions and other applications in microelectronics. More recently, the rapidly growing field of biomaterial synthesis makes used of PBII&D to produce surgical implants, bio- and blood-compatible surfaces and coatings, etc. With limitations, also non-conducting materials such as plastic sheets can be treated. The major interest in PBII processing originates from its flexibility in ion energy (from a few eV up to about 100 keV), and the capability to efficiently treat, or deposit on, large areas, and (within limits) to process non-flat, three-dimensional workpieces, including forming and modifying metastable phases and nanostructures. We use the acronym PBII&D when referring to both implantation and deposition, while PBIID implies that deposition is part of the process.

  8. Application of Radiation Chemistry to Some Selected Technological Issues Related to the Development of Nuclear Energy.

    Science.gov (United States)

    Bobrowski, Krzysztof; Skotnicki, Konrad; Szreder, Tomasz

    2016-10-01

    The most important contributions of radiation chemistry to some selected technological issues related to water-cooled reactors, reprocessing of spent nuclear fuel and high-level radioactive wastes, and fuel evolution during final radioactive waste disposal are highlighted. Chemical reactions occurring at the operating temperatures and pressures of reactors and involving primary transients and stable products from water radiolysis are presented and discussed in terms of the kinetic parameters and radiation chemical yields. The knowledge of these parameters is essential since they serve as input data to the models of water radiolysis in the primary loop of light water reactors and super critical water reactors. Selected features of water radiolysis in heterogeneous systems, such as aqueous nanoparticle suspensions and slurries, ceramic oxides surfaces, nanoporous, and cement-based materials, are discussed. They are of particular concern in the primary cooling loops in nuclear reactors and long-term storage of nuclear waste in geological repositories. This also includes radiation-induced processes related to corrosion of cladding materials and copper-coated iron canisters, dissolution of spent nuclear fuel, and changes of bentonite clays properties. Radiation-induced processes affecting stability of solvents and solvent extraction ligands as well oxidation states of actinide metal ions during recycling of the spent nuclear fuel are also briefly summarized.

  9. Power supply and impedance matching to drive technological radio-frequency plasmas with customized voltage waveforms.

    Science.gov (United States)

    Franek, James; Brandt, Steven; Berger, Birk; Liese, Martin; Barthel, Matthias; Schüngel, Edmund; Schulze, Julian

    2015-05-01

    We present a novel radio-frequency (RF) power supply and impedance matching to drive technological plasmas with customized voltage waveforms. It is based on a system of phase-locked RF generators that output single frequency voltage waveforms corresponding to multiple consecutive harmonics of a fundamental frequency. These signals are matched individually and combined to drive a RF plasma. Electrical filters are used to prevent parasitic interactions between the matching branches. By adjusting the harmonics' phases and voltage amplitudes individually, any voltage waveform can be approximated as a customized finite Fourier series. This RF supply system is easily adaptable to any technological plasma for industrial applications and allows the commercial utilization of process optimization based on voltage waveform tailoring for the first time. Here, this system is tested on a capacitive discharge based on three consecutive harmonics of 13.56 MHz. According to the Electrical Asymmetry Effect, tuning the phases between the applied harmonics results in an electrical control of the DC self-bias and the mean ion energy at almost constant ion flux. A comparison with the reference case of an electrically asymmetric dual-frequency discharge reveals that the control range of the mean ion energy can be significantly enlarged by using more than two consecutive harmonics.

  10. Thermal analysis on the EAST tungsten plasma facing components with shaping structure counteracting the misalignment issues

    Science.gov (United States)

    Baoguo, Wang; Dahuan, Zhu; Rui, Ding; Junling, Chen

    2017-02-01

    Tungsten monoblock type tiles with ITER dimensions along with supporting cassette components were installed at EAST’s upper diverter during 2014 and EAST’s lower diverter will also be upgraded in the future. These cassette structures pose critical issues on the high cumulative incident heat flux due to the leading edges and misalignments (0 ˜ 1.5 mm), which may result in the destruction or even melting of the tungsten tile. The present work summarizes the thermal analysis using ANSYS multiphysics software 15.0 performed on the actively cooled W tiles to evaluate the shaping effect on surface temperature. In the current heat flux conditions (Q|| ˜ 100 MW m-2), the adopted chamfer shaping (1 × 1 mm) can only reduce the maximum temperature by about 14%, but it also has a melting risk at the maximum misalignment of 1.5 mm. The candidate shaping solutions elliptical (round) edge, dome and fish-scale are analyzed for comparison and are identified not as good as the dual chamfer structure. A relatively good dual chamfer (2 × 13 mm) shaping forming a symmetrical sloping roof structure can effectively counteract the 1.5 mm misalignment, reducing the maximum temperature by up to 50%. However, in the future heat flux conditions (Q|| ˜ 287 MW m-2), it may only endure about 0.5 mm misalignment. Moreover, no proper shaping solution has been found that can avoid melting at the maximum misalignment of 1.5 mm. Thus, the engineering misalignment has to be limited to an acceptable level. Supported by the National Magnetic Confinement Fusion Science Program of China (Nos. 2013GB107004 and 2013GB105003) and National Natural Science Foundation of China (No. 11405209).

  11. Recovery of Drug Delivery Nanoparticles from Human Plasma Using an Electrokinetic Platform Technology.

    Science.gov (United States)

    Ibsen, Stuart; Sonnenberg, Avery; Schutt, Carolyn; Mukthavaram, Rajesh; Yeh, Yasan; Ortac, Inanc; Manouchehri, Sareh; Kesari, Santosh; Esener, Sadik; Heller, Michael J

    2015-10-01

    The effect of complex biological fluids on the surface and structure of nanoparticles is a rapidly expanding field of study. One of the challenges holding back this research is the difficulty of recovering therapeutic nanoparticles from biological samples due to their small size, low density, and stealth surface coatings. Here, the first demonstration of the recovery and analysis of drug delivery nanoparticles from undiluted human plasma samples through the use of a new electrokinetic platform technology is presented. The particles are recovered from plasma through a dielectrophoresis separation force that is created by innate differences in the dielectric properties between the unaltered nanoparticles and the surrounding plasma. It is shown that this can be applied to a wide range of drug delivery nanoparticles of different morphologies and materials, including low-density nanoliposomes. These recovered particles can then be analyzed using different methods including scanning electron microscopy to monitor surface and structural changes that result from plasma exposure. This new recovery technique can be broadly applied to the recovery of nanoparticles from high conductance fluids in a wide range of applications.

  12. Energy influx measurements with an active thermal probe in plasma-technological processes

    Energy Technology Data Exchange (ETDEWEB)

    Wiese, Ruben; Kersten, Holger [Institut fuer Experimentelle und Angewandte Physik, Kiel (Germany); Wiese, Georg; Bartsch, Rene [Formerly Institut fuer Plasmaforschung und Technologie, Greifswald (Germany)

    2015-01-01

    Many plasma-technological applications are based on plasma wall interaction, which can be characterised by calorimetric probes to measure the energy influx from the plasma to the substrate surface. Passive probes are based on the principle of recording the temperature course during heating and cooling of the probe for calculating the energy influx. The disadvantages of these probes are that the energy influx has to be interrupted by switching off the energy source or by using suitable apertures and by the necessity of knowing the exact heat capacity of the probe. A continuously operating active probe is, therefore, developed which does not need to be calibrated and which compensates the environmental effects as well as the heat conduction by the probe holder. By means of controlled electrical heating the probe is set to a given working temperature and then the energy supply supporting the fixed operating temperature is measured. The energy influx by the plasma is compensated by decreasing the heating power and is directly displayed in J/cm{sup 2}s. Some practical measurements are presented. Even, if the probe is designed as double probe the directionality of the energy influx can be determined. (orig.)

  13. Research on the denitration mechanism of fly ash catalysts modified by low-temperature plasma technology

    Directory of Open Access Journals (Sweden)

    Wen-jie Nie

    2017-08-01

    Full Text Available There are three different fly ashes mixed with bentonite respectively as raw material to preparation of denitration catalyst. Then the catalyst combined with the low temperature plasma for denitration. The different mixing ratio, drying temperature and drying time of catalyst preparation were studied. The denitration mechanism of fly ash catalyst modified with different gases (O2, N2, Ar, and hydrocarbon gas by low-temperature plasma technology was studied. The compositions of fly ash were detected by element analysis, ICP analysis, Boehm analysis, and Infrared spectral analysis which affected the denitration performance of fly ash catalyst. And we discussed the effect of denitration performance with different types of fly ash and plasma power. The results shown that: fly ash mixed with bentonite for 2:1, drying temperature is 100°C and drying time is 30 min are the optimal preparation conditions; The denitration performance is best of the catalyst which produced by circulating fluidized bed when the plasma power is 30 W. And Oxygen can be used as the modification gas for preparing the fly-ash catalyst. There are more basic functional groups on the surface of fly ash catalyst modified with oxygen atmosphere and the N=O plays a main role.

  14. EDITORIAL: Special issue containing papers presented at the 4th IAEA Technical Meeting on the Theory of Plasma Instabilities Special issue containing papers presented at the 4th IAEA Technical Meeting on the Theory of Plasma Instabilities

    Science.gov (United States)

    Itoh, K.; Wilson, H. R.

    2010-05-01

    The 4th IAEA technical meeting (TM) on the Theory of Plasma Instabilities was held in Kyoto, May 18th--20th 2009, following the first (Seeon), second (Trieste) and third (York) meetings in this series. This IAEA-TM was motivated by the recent advances in theoretical methodology, the rapid progress in observations of laboratory and astrophysical plasmas and the evolution of fusion research as we approach the ITER era. The international advisory committee (IAC) and local organizing committee (LOC), the members of which are listed below, collaborated to define the scope and the content of the scientific programme. Young scientists were actively encouraged to participate in this TM to help stimulate their future research careers and raise their international profiles. Through these young scientists, the IAEA-TM planned to identify the future directions of research. About 90 researchers, from 13 countries and the IAEA, participated in this IAEA-TM, with 72 scientific presentations. The talks and posters generated enthusiastic discussions, contributing to the vibrancy of the meeting. This special issue of Nuclear Fusion consists of a cluster of papers, reporting some of the main contributions to the IAEA-TM. The articles in this cluster are representative of the scientific width of presentations at the meeting, spanning topics from micro-turbulence to large-scale MHD dynamics and from transport to detailed analysis of diagnostics. They demonstrate the quality and depth of the research presented at the conference. List of IAC (alphabetical order): B. Breizman (USA), S. Guenter (Germany), T. S. Hahm (USA), K. Itoh (Japan, Chair of 2009), Ya. I. Kolesnichenko (Ukraine), A. G. Peeters (UK), H. Wilson (UK) List of LOC (alphabetical order): A. Fukuyama, R. Horiuchi, S.-I. Itoh, N. Kasuya, Y. Kishimoto (co-chair), K. Kusano, J. Li, K. Mima, S. Murakami, H. Naitou, N. Nakajima, Y. Nakamura, H. Ohtani, S. Okamura, T. Ozeki, S. Sudo (co-chair), H. Sugama, Y. Todo, S. Tokuda, S

  15. Gene Technology: Also a Gender Issue. Views of Dutch Informed Women on Genetic Screening and Gene Therapy.

    Science.gov (United States)

    van Berkel, Dymphie; Klinge, Ineke

    1997-01-01

    The views of Dutch women on the implications of the analysis of the human genome were studied by questionnaire and interview. Although a serious lack of knowledge about the topic was found, interviews produced a broad range of problematic issues. Attention to gender implications of gene technology is needed. (Author/EMK)

  16. Methods for studying medical device technology and practitioner cognition : The case of user-interface issues with infusion pumps

    NARCIS (Netherlands)

    Schraagen, J.M.C.; Verhoeven, F.

    2013-01-01

    Purpose : The aims of this study were to investigate how a variety of research methods is commonly employed to study technology and practitioner cognition. User-interface issues with infusion pumps were selected as a case because of its relevance to patient safety. Methods : Starting from a Cognitiv

  17. Methods for studying medical device technology and practitioner cognition: the case of user-interface issues with infusion pumps

    NARCIS (Netherlands)

    Schraagen, J.M.C.; Verhoeven, F.

    2013-01-01

    Purpose The aims of this study were to investigate how a variety of research methods is commonly employed to study technology and practitioner cognition. User-interface issues with infusion pumps were selected as a case because of its relevance to patient safety. Methods Starting from a Cognitive S

  18. The use of cold plasma technology to reduce carryover in screening assays.

    Science.gov (United States)

    Akhlaq, Mohammed; Rosethorne, Elizabeth M; Sattikar, Afrah; Kent, Toby C

    2013-08-01

    The accurate transfer of biological reagents represents a fundamental step in the drug screening process, and the elimination of carryover is critical for the generation of accurate measurements of biological activity. The introduction of automated liquid robotics into screening laboratories has transformed the drug screening process, enabling accurate and reproducible transfer of liquids to become a high-throughput activity, but has also introduced a new challenge for drug discoverers: to establish screening workflows that limit analyte carryover for the generation of high-quality screening data. The widespread use of pipetting tips on automated liquid handlers often necessitates the use of optimized wash protocols for removing contaminants and frequently requires the use and disposal of large quantities of organic solvents. Furthermore, many chemical and biological reagents are recalcitrant to removal from pipetting tips by treatment with organic solvents. The use of cold atmospheric plasma technology provides an alternative approach for removal of contaminants and offers many advantages over traditional decontamination protocols commonly used during biological screening. This report describes the evaluation of a cold plasma tip-cleaning system for reducing carryover in a range of biological screening assays requiring the transfer of low molecular weight compound, nucleic acid, and bacterial liquid transfers. The validation of this technology for biological screening assays is presented, and the impact of this technology for screening workflows is discussed.

  19. A new reactive atom plasma technology (RAPT) for precision machining: the etching of ULE optical surfaces

    Science.gov (United States)

    Fanara, Carlo; Shore, Paul; Nicholls, John R.; Lyford, Nicholas; Sommer, Phil; Fiske, Peter

    2006-06-01

    The next generation of 30-100 metre diameter extremely large telescopes (ELTs) requires large numbers of hexagonal primary mirror segments. As part of the Basic Technology programme run jointly by UCL and Cranfield University, a reactive atomic plasma technology (RAP(tm)) emerged from the US Lawrence Livermore National Laboratory (LLNL), is employed for the finishing of these surfaces. Results are presented on this novel etching technology. The Inductively Coupled Plasma (ICP) operated at atmospheric pressure using argon, activates the chemical species injected through its centre and promotes the fluorine-based chemical reactions at the surface. Process assessment trials on Ultra Low Expansion (ULE(tm)) plates, previously ground at high material removal rates, have been conducted. The quality of the surfaces produced on these samples using the RAP process are discussed. Substantial volumetric material removal rates of up to 0.446(21) mm 3/s at the highest process speed (1,200 mm/min) were found to be possible without pre-heating the substrate. The influences of power transfer, process speed and gas concentration on the removal rates have been determined. The suitability of the RAP process for revealing and removing sub-surface damage induced by high removal rate grinding is discussed. The results on SiC samples are reported elsewhere in this conference.

  20. Plasma-assisted combustion technology for NOx reduction in industrial burners.

    Science.gov (United States)

    Lee, Dae Hoon; Kim, Kwan-Tae; Kang, Hee Seok; Song, Young-Hoon; Park, Jae Eon

    2013-10-01

    Stronger regulations on nitrogen oxide (NOx) production have recently promoted the creation of a diverse array of technologies for NOx reduction, particularly within the combustion process, where reduction is least expensive. In this paper, we discuss a new combustion technology that can reduce NOx emissions within industrial burners to single-digit parts per million levels without employing exhaust gas recirculation or other NOx reduction mechanisms. This new technology uses a simple modification of commercial burners, such that they are able to perform plasma-assisted staged combustion without altering the outer configuration of the commercial reference burner. We embedded the first-stage combustor within the head of the commercial reference burner, where it operated as a reformer that could host a partial oxidation process, producing hydrogen-rich reformate or synthesis gas product. The resulting hydrogen-rich flow then ignited and stabilized the combustion flame apart from the burner rim. Ultimately, the enhanced mixing and removal of hot spots with a widened flame area acted as the main mechanisms of NOx reduction. Because this plasma burner acted as a low NOx burner and was able to reduce NOx by more than half compared to the commercial reference burner, this methodology offers important cost-effective possibilities for NOx reduction in industrial applications.

  1. ECOLOGICAL, ECONOMIC AND SOCIAL ISSUES OF IMPLEMENTING CARBON DIOXIDE SEQUESTRATION TECHNOLOGIES IN THE OIL AND GAS INDUSTRY IN RUSSIA

    Directory of Open Access Journals (Sweden)

    Alexey Cherepovitsyn

    2016-04-01

    Full Text Available The objective of this paper is to define the main approaches to the implementation of carbon dioxide sequestration technologies in the oil and gas industry in Russia, and also to identify ecological, economic and social issues of their usage. Promotion of the technology of carbon dioxide (CO2 sequestration by means of capturing and injecting it into underground reservoirs is a promising mechanism of reducing carbon dioxide concentration. Carbon capture and storage (CCS technologies might be used to enhance oil recovery (EOR-CO2 and production by means of oil extraction and decreasing oil viscosity. Conceptual view of the potential of EOR-СО2 technologies within the context of oil and gas industry sustainable development are presented. Incentives of the CCS projects implementation are identified. On the basis of the conducted research a number of scientific research and practical areas of the CCS technology development are presented.

  2. Land and Resource Management Issues Relevant to Deploying In-Situ Thermal Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Keiter, Robert; Ruple, John; Tanana, Heather; Kline, Michelle

    2011-02-28

    Utah is home to oil shale resources containing roughly 1.3 trillion barrels of oil equivalent and our nation’s richest oil sands resources. If economically feasible and environmentally responsible means of tapping these resources can be developed, these resources could provide a safe and stable domestic energy source for decades to come. In Utah, oil shale and oil sands resources underlay a patchwork of federal, state, private, and tribal lands that are subject to different regulatory schemes and conflicting management objectives. Evaluating the development potential of Utah’s oil shale and oil sands resources requires an understanding of jurisdictional issues and the challenges they present to deployment and efficient utilization of emerging technologies. The jurisdictional patchwork and divergent management requirements inhibit efficient, economic, and environmentally sustainable development. This report examines these barriers to resource development, methods of obtaining access to landlocked resources, and options for consolidating resource ownership. This report also examines recent legislative efforts to wrest control of western public lands from the federal government. If successful, these efforts could dramatically reshape resource control and access, though these efforts appear to fall far short of their stated goals. The unintended consequences of adversarial approaches to obtaining resource access may outweigh their benefits, hardening positions and increasing tensions to the detriment of overall coordination between resource managers. Federal land exchanges represent a more efficient and mutually beneficial means of consolidating management control and improving management efficiency. Independent of exchange proposals, resource managers must improve coordination, moving beyond mere consultation with neighboring landowners and sister agencies to coordinating actions with them.

  3. Land and Resource Management Issues Relevant to Deploying In-Situ Thermal Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Keiter, Robert [Univ. of Utah, Salt Lake City, UT (United States); Ruple, John [Univ. of Utah, Salt Lake City, UT (United States); Tanana, Heather [Univ. of Utah, Salt Lake City, UT (United States); Kline, Michelle [Univ. of Utah, Salt Lake City, UT (United States)

    2011-01-01

    Utah is home to oil shale resources containing roughly 1.3 trillion barrels of oil equivalent and our nation’s richest oil sands resources. If economically feasible and environmentally responsible means of tapping these resources can be developed, these resources could provide a safe and stable domestic energy source for decades to come. In Utah, oil shale and oil sands resources underlay a patchwork of federal, state, private, and tribal lands that are subject to different regulatory schemes and conflicting management objectives. Evaluating the development potential of Utah’s oil shale and oil sands resources requires an understanding of jurisdictional issues and the challenges they present to deployment and efficient utilization of emerging technologies. The jurisdictional patchwork and divergent management requirements inhibit efficient, economic, and environmentally sustainable development. This report examines these barriers to resource development, methods of obtaining access to landlocked resources, and options for consolidating resource ownership. This report also examines recent legislative efforts to wrest control of western public lands from the federal government. If successful, these efforts could dramatically reshape resource control and access, though these efforts appear to fall far short of their stated goals. The unintended consequences of adversarial approaches to obtaining resource access may outweigh their benefits, hardening positions and increasing tensions to the detriment of overall coordination between resource managers. Federal land exchanges represent a more efficient and mutually beneficial means of consolidating management control and improving management efficiency. Independent of exchange proposals, resource managers must improve coordination, moving beyond mere consultation with neighboring landowners and sister agencies to coordinating actions with them.

  4. PREFACE: 2nd International Meeting for Researchers in Materials and Plasma Technology

    Science.gov (United States)

    Niño, Ely Dannier V.

    2013-11-01

    These proceedings present the written contributions of the participants of the 2nd International Meeting for Researchers in Materials and Plasma Technology, 2nd IMRMPT, which was held from February 27 to March 2, 2013 at the Pontificia Bolivariana Bucaramanga-UPB and Santander and Industrial - UIS Universities, Bucaramanga, Colombia, organized by research groups from GINTEP-UPB, FITEK-UIS. The IMRMPT, was the second version of biennial meetings that began in 2011. The three-day scientific program of the 2nd IMRMPT consisted in 14 Magisterial Conferences, 42 Oral Presentations and 48 Poster Presentations, with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, France, Venezuela, Brazil, Uruguay, Argentina, Peru, Mexico, United States, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish scientific cooperation in the field of materials science and plasma technology; introduce new techniques of surface treatment of materials to improve properties of metals in terms of the deterioration due to corrosion, hydrogen embrittlement, abrasion, hardness, among others; and establish cooperation agreements between universities and industry. The topics covered in the 2nd IMRMPT include New Materials, Surface Physics, Laser and Hybrid Processes, Characterization of Materials, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion / Oxidation, Modeling, Simulation and Diagnostics, Plasma Applications and Technologies, Biomedical Coatings and Surface Treatments, Non Destructive Evaluation and Online Process Control, Surface Modification (Ion Implantation, Ion Nitriding, PVD, CVD). The editors hope that those interested in the are of materials science and plasma technology, enjoy the reading that reflect a wide range of topics. It is a pleasure to thank the sponsors and all the participants and contributors for

  5. Technology and complete set of the equipment of air-plasma method for synthesis of nanoaerosols

    Science.gov (United States)

    Kopytin, Yurii D.; Novikov, O. G.

    2004-02-01

    The paper is aimed at studying synthesis and construction, as well as physical-chemical characteristics of nanoaerosols. The technology and product line of the Air-plasma method for synthesis of metal oxide nanopowders to obtain high-performance ceramics (PSNP) is hot and set at manufacturing different-types zirconium ceramics stabilized by yttrium and magnesium oxides, as well as other dopes. For the available equipment, the technologies of producing nanopowders of other metal oxides alongside with circonium oxide and composite oxides (Al203, Ti02, CuO, SiO2, Fe2O2, ZnO, CoO, Cr2O3, PbO, MnO, MgO, CaO, CeO, etc.) are developed and adapted.

  6. Technological Proficiency as a Key to Job Security. Trends and Issues Alert No. 6.

    Science.gov (United States)

    Imel, Susan

    Although not all current jobs require basic computer skills, technological advances in society have created new jobs and changed the ways many existing jobs are performed. Clearly, workers who are proficient in technology have a greater advantage in the current workplace and the need for technologically proficient workers will only continue to…

  7. Research for Practice: A Look at Issues in Technology for Second Language Learning

    Science.gov (United States)

    Chapelle, Carol A.

    2010-01-01

    Over the past fourteen years, the pages of "Language Learning & Technology" have been filled with examples of research that take up the challenge of investigating second language learning through technology. It has been a period of expansion and growth in many ways. The expansion of technologies as well as their acceptance and use in language…

  8. To What Extent do Biology Textbooks Contribute to Scientific Literacy? Criteria for Analysing Science-Technology-Society-Environment Issues

    Directory of Open Access Journals (Sweden)

    Florbela M. Calado

    2015-10-01

    Full Text Available Our article proposes a set of six criteria for analysing science-technology-society-environment (STSE issues in regular textbooks as to how they are expected to contribute to students’ scientific literacy. We chose genetics and gene technology as fields prolific in STSE issues. We derived our criteria (including 26 sub-criteria from a literature review of the debate in science education on how to increase scientific literacy. We inspected the textbooks regarding the relationships between science, technology, society, and environment, and considered the presence of the decontextualized and socially neutral view of science as distorted view. We, qualitatively and quantitatively, applied our set of criteria to two German Biology textbooks and identified, in total, 718 STSE statements. Based on the frequencies of different criteria and sub-criteria in the textbooks, we drew conclusions concerning STSE issues and the underlying conceptions of science and technology, which might hinder the furtherance of scientific literacy. The applicability of our approach in other science education contexts is discussed.

  9. Field demonstration and commercialization of silent discharge plasma hazardous air pollutant control technology

    Energy Technology Data Exchange (ETDEWEB)

    Rosocha, L.A.; Coogan, J.J.; Korzekwa, R.A.; Secker, D.A. [Los Alamos National Lab., NM (United States); Reimers, R.F.; Herrmann, P.G.; Chase, P.J.; Gross, M.P. [High Mesa Technologies LLC, Santa Fe, NM (United States)]|[High Mesa Technologies LLC, Irvine, CA (United States); Jones, M.R. [Electric Power Research Inst., Palo Alto, CA (United States)

    1996-07-01

    Silent electrical discharge plasma (dielectric barrier) reactors can decompose gas-phase pollutants by free-radical attack or electron-induced fragmentation. The radicals or electrons are produced by the large average volume nonthermal plasmas generated in the reactor. In the past decade, the barrier configuration has attracted attention for destroying toxic chemical agents for the military, removing harmful greenhouse gases, and treating other environmentally- hazardous chemical compounds. At the Los Alamos National Laboratory, we have been studying the silent discharge plasma (SDP) for processing gaseous-based hazardous chemicals for approximately five years. The key objective is to convert hazardous or toxic chemicals into non-hazardous compounds or into materials which are more easily managed. The main applications have been for treating off-gases from thermal treatment units, and for abating hazardous air-pollutant emissions (e.g., industrial air emissions, vapors extracted from contaminated soil or groundwater). In this paper, we will summarize the basic principles of SDP processing, discuss illustrative applications of the technology, and present results from small-scale field tests that are relevant to our commercialization effort.

  10. POLICY ANALYSIS OF PRODUCED WATER ISSUES ASSOCIATED WITH IN-SITU THERMAL TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Robert Keiter; John Ruple; Heather Tanana

    2011-02-01

    Commercial scale oil shale and oil sands development will require water, the amount of which will depend on the technologies adopted and the scale of development that occurs. Water in oil shale and oil sands country is already in scarce supply, and because of the arid nature of the region and limitations on water consumption imposed by interstate compacts and the Endangered Species Act, the State of Utah normally does not issue new water rights in oil shale or oil sands rich areas. Prospective oil shale and oil sands developers that do not already hold adequate water rights can acquire water rights from willing sellers, but large and secure water supplies may be difficult and expensive to acquire, driving oil shale and oil sands developers to seek alternative sources of supply. Produced water is one such potential source of supply. When oil and gas are developed, operators often encounter ground water that must be removed and disposed of to facilitate hydrocarbon extraction. Water produced through mineral extraction was traditionally poor in quality and treated as a waste product rather than a valuable resource. However, the increase in produced water volume and the often-higher quality water associated with coalbed methane development have drawn attention to potential uses of produced water and its treatment under appropriations law. This growing interest in produced water has led to litigation and statutory changes that must be understood and evaluated if produced water is to be harnessed in the oil shale and oil sands development process. Conversely, if water is generated as a byproduct of oil shale and oil sands production, consideration must be given to how this water will be disposed of or utilized in the shale oil production process. This report explores the role produced water could play in commercial oil shale and oil sands production, explaining the evolving regulatory framework associated with produced water, Utah water law and produced water regulation

  11. US-Japan workshop Q-181 on high heat flux components and plasma-surface interactions for next devices: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    McGrath, R.T. [ed.] [Sandia National Labs., Albuquerque, NM (United States); Yamashina, T. [ed.] [Hokkadio Univ. (Japan)

    1994-04-01

    This report contain viewgraphs of papers from the following sessions: plasma facing components issues for future machines; recent PMI results from several tokamaks; high heat flux technology; plasma facing components design and applications; plasma facing component materials and irradiation damage; boundary layer plasma; plasma disruptions; conditioning and tritium; and erosion/redeposition.

  12. Critical issues in the choice of appropriate communication technology by Third World countries.

    Science.gov (United States)

    Sonaike, S A

    1987-01-01

    Recent experience suggests that the most appropriate form of technology for the Third World is an adapted, intermediate (less capital intensive) technology, founded around the needs of the people and utilizing readily available resources. When technology is used to relieve the symptoms of underdevelopment, a technologic misfit manifested in an overemphasis on prestige projects and the urban industrial sector results. Advanced communication technologies such as satellites are generally capital intensive, require high technical skills to install and maintain, and need sophisticated levels of management to function properly. These conditions are not easily met in the Third World, underscoring the need for intermediate technology as manifested in small and medium-sized business enterprises. Such an approach blends traditional technology, minimal capital, simple management structure, ample labor, and humane operation with the gains from sophisticated technology. Intermediate technology can serve as a good training ground for indigenous people in modern business methods and provide jobs for the unemployed. Most importantly, intermediate technology can function as an integral part of the larger society rather than as a loosely attached appendage grafted on by some foreign country. In the field of communication, such an approach would manifest itself in a willingness to operate professionally with simple portable cameras, an acceptance of the importance of rural radio broadcasting and village newspapers, a willingness on the part of trained media professionals to try out locally produced hardware, and an exploration of cheaper ways of producing textbooks.

  13. Gender issues in computer-supported learning: what we can learn from the gender; science and technology literature

    Directory of Open Access Journals (Sweden)

    Gwyneth Hughes

    2002-12-01

    Full Text Available This paper is a response to the article, 'Gender issues in computer-supported learning', in ALT-J 10 (1. I argue that the studies presented in the original paper could be enhanced by a more rigorous approach to gender that avoids universalizing identity, recognizes gender as a construction and which builds on previous research from gender, science and technology studies.

  14. Technologies for Self-Determination for Youth with Developmental Disabilities. Technologies for Voice: A Critical Issues Brief

    Science.gov (United States)

    Skouge, James R.; Kelly, Mary L.; Roberts, Kelly D.; Leake, David W.; Stodden, Robert A.

    2007-01-01

    This paper focuses on "technologies for voice" that are related to the self-determination of youth with developmental disabilities. The authors describe a self-determination model that values family-focused, community-referenced pedagogies employing "new media" to give voice to youth and their families. In line with the adage that a picture is…

  15. Demonstrating and Deploying Private Sector Technologies at DOE Sites - Issues to be Overcome

    Energy Technology Data Exchange (ETDEWEB)

    Bedick, R. C.

    2002-02-27

    The Department of Energy (DOE), Office of Environmental Management (EM) continues to pursue cost-effective, environmental cleanup of the weapons complex sites with a concomitant emphasis on deployment of innovative technologies as a means to this end. The EM Office of Science and Technology (OST) pursues a strategy that entails identification of technologies that have potential applications throughout the DOE complex: at multiple DOE sites and at multiple facilities on those sites. It further encourages a competitive procurement process for the various applications entailed in the remediation of a given facility. These strategies require a competitive private-sector supplier base to help meet EM needs. OST supports technology development and deployment through investments in partnerships with private industry to enhance the acceptance of their technology products within the DOE market. Since 1992, OST and the National Energy Technology Laboratory (NETL) have supported the re search and development of technology products and services offered by the private sector. During this time, NETL has managed over 140 research and development projects involving industrial and university partners. These projects involve research in a broad range of EM related topics, including deactivation and decommissioning, characterization, monitoring, sensors, waste separation, groundwater remediation, robotics, and mixed waste treatment. Successful partnerships between DOE and Industry have resulted in viable options for EM's cleanup needs, and require continued marketing efforts to ensure that these technology solutions are used at multiple DOE sites and facilities.

  16. Ethical Issues in the Introduction of New Technologies: From Mis to POEM.

    Science.gov (United States)

    Ferreres, Alberto R; Patti, Marco

    2015-07-01

    The ethical debate regarding the introduction of new technologies in the surgical health care environment is discussed in this manuscript, with a special emphasis on minimally invasive and NOTES procedures for the treatment of esophageal achalasia. It offers an overview of the ethical principles and considerations about the implementation of new techniques and technologies.

  17. Trends and Issues in Educational Technology Research in Saudi Higher Education: A Meta-Analysis Review

    Science.gov (United States)

    Alkraiji, Abdullah; Eidaroos, Abdulhadi

    2016-01-01

    As Information Technology expands, all industries and fields in Saudi Arabia are experiencing reduced costs and improvements in the efficiency and effectiveness of operations in various systems. This has positioned the higher education sector in Saudi Arabia as the land of opportunity in terms of educational technology and its ability to support…

  18. Current Technology Trends and Issues among Health and Physical Education Professionals

    Science.gov (United States)

    Krause, Jennifer M.; Franks, Hillary; Lynch, Brandy

    2017-01-01

    Health and physical education professionals who implement technology appropriately can contribute to helping students become physically educated individuals (NASPE, 2009). It is imperative that professionals be knowledgeable and resourceful in how to integrate technology effectively, but it is unclear what current challenges professionals face in…

  19. A Technology Assessment of Personal Computers. Vol. III: Personal Computer Impacts and Policy Issues.

    Science.gov (United States)

    Nilles, Jack M.; And Others

    A technology assessment of personal computers was conducted to study both the socially desirable and undesirable impacts of this new technology in three main areas: education, employment, and international trade. Information gleaned from this study was then used to generate suggestions for public policy options which could influence these impacts.…

  20. Spanish Secondary-School Science Teachers' Beliefs about Science-Technology-Society (STS) Issues

    Science.gov (United States)

    Vazquez-Alonso, Angel; Garcia-Carmona, Antonio; Manassero-Mas, Maria Antonia; Bennassar-Roig, Antoni

    2013-01-01

    This study analyzes the beliefs about science-technology-society, and other Nature of Science (NOS) themes, of a large sample (613) of Spanish pre- and in-service secondary education teachers through their responses to 30 items of the Questionnaire of Opinions on Science, Technology and Society. The data were processed by means of a multiple…

  1. IT Legislative and Regulatory Issues Agenda. Higher Education Information Technology Alliance

    Science.gov (United States)

    National Association of State Universities and Land-Grant Colleges, 2004

    2004-01-01

    This document represents the higher education and library community's guiding public policy agenda on information technology (IT) for the current year. The Higher Education Information Technology (HEIT) Alliance is a coalition of 11 national higher education and library associations, whose members represent a broad array of stakeholders on college…

  2. The Technology of Non-thermal Plasma Assisted NH3-SCR Reduce Marine Diesel Emission and Aldehydes Byproducts Formation

    Directory of Open Access Journals (Sweden)

    Lei Jiang

    2013-12-01

    Full Text Available This study describes briefly various after-treatment technologies in marine diesel engines and application difficulties of DPF and SCR are included. An experiment has been conducted using non-thermal plasma generated by Dielectric Barrier Discharge (DBD process assisted NH3-SCR catalyst to reduce the nitrogen oxides (NOx from diesel engine exhaust. The formation mechanism of byproducts-type such as HCHO and CH3CHO in the non-thermal plasma assisted NH3-SCR hybrid system.

  3. Laser technologies - ready to take the economy into the plasma age

    Energy Technology Data Exchange (ETDEWEB)

    White, C.

    The author notes that the spinoff benefits from the Strategic Defense Initiative program are ready to provide a shot in the arm to the ailing US economy, generating the increased productivity and increased tax revenue that would more than pay for the entire beam defense program. These laser technologies, if applied to the civilian economy, would be the peacetime equivalent of the World War II economic mobilization. A crash program to develop the Strategic Defense Initiative and its spinoff technologies would cause a fourfold increase of economic productivity, an increase of 4 million jobs per year, elimination of the US trade deficit within a two-year period, and a rise in real per capita income by 5% per year, according to White. All it takes is a political decision to reduce interest rates and issue low-interest credits to American industry, she says. 1 reference, 4 tables.

  4. Study of the feasibility of distributed cathodic arc as a plasma source for development of the technology for plasma separation of SNF and radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Amirov, R. Kh.; Vorona, N. A.; Gavrikov, A. V.; Liziakin, G. D.; Polistchook, V. P.; Samoylov, I. S.; Smirnov, V. P.; Usmanov, R. A., E-mail: ravus46@yandex.ru; Yartsev, I. M. [Russian Academy of Sciences, Joint Institute for High Temperatures (Russian Federation)

    2015-12-15

    One of the key problems in the development of plasma separation technology is designing a plasma source which uses condensed spent nuclear fuel (SNF) or nuclear wastes as a raw material. This paper covers the experimental study of the evaporation and ionization of model materials (gadolinium, niobium oxide, and titanium oxide). For these purposes, a vacuum arc with a heated cathode on the studied material was initiated and its parameters in different regimes were studied. During the experiment, the cathode temperature, arc current, arc voltage, and plasma radiation spectra were measured, and also probe measurements were carried out. It was found that the increase in the cathode heating power leads to the decrease in the arc voltage (to 3 V). This fact makes it possible to reduce the electron energy and achieve singly ionized plasma with a high degree of ionization to fulfill one of the requirements for plasma separation of SNF. This finding is supported by the analysis of the plasma radiation spectrum and the results of the probe diagnostics.

  5. Systematic Review of the Performance of HIV Viral Load Technologies on Plasma Samples

    Science.gov (United States)

    Sollis, Kimberly A.; Smit, Pieter W.; Fiscus, Susan; Ford, Nathan; Vitoria, Marco; Essajee, Shaffiq; Barnett, David; Cheng, Ben; Crowe, Suzanne M.; Denny, Thomas; Landay, Alan; Stevens, Wendy; Habiyambere, Vincent; Perrins, Jos; Peeling, Rosanna W.

    2014-01-01

    Background Viral load (VL) monitoring is the standard of care in developing country settings for detecting HIV treatment failure. Since 2010 the World Health Organization has recommended a phase-in approach to VL monitoring in resource-limited settings. We conducted a systematic review of the accuracy and precision of HIV VL technologies for treatment monitoring. Methods and Findings A search of Medline and Embase was conducted for studies evaluating the accuracy or reproducibility of commercially available HIV VL assays. 37 studies were included for review including evaluations of the Amplicor Monitor HIV-1 v1.5 (n = 25), Cobas TaqMan v2.0 (n = 11), Abbott RealTime HIV-1 (n = 23), Versant HIV-1 RNA bDNA 3.0 (n = 15), Versant HIV-1 RNA kPCR 1.0 (n = 2), ExaVir Load v3 (n = 2), and NucliSens EasyQ v2.0 (n = 1). All currently available HIV VL assays are of sufficient sensitivity to detect plasma virus levels at a lower detection limit of 1,000 copies/mL. Bias data comparing the Abbott RealTime HIV-1, TaqMan v2.0 to the Amplicor Monitor v1.5 showed a tendency of the Abbott RealTime HIV-1 to under-estimate results while the TaqMan v2.0 overestimated VL counts. Compared to the Amplicor Monitor v1.5, 2–26% and 9–70% of results from the Versant bDNA 3.0 and Abbott RealTime HIV-1 differed by greater than 0.5log10. The average intra and inter-assay variation of the Abbott RealTime HIV-1 were 2.95% (range 2.0–5.1%) and 5.44% (range 1.17–30.00%) across the range of VL counts (2log10–7log10). Conclusions This review found that all currently available HIV VL assays are of sufficient sensitivity to detect plasma VL of 1,000 copies/mL as a threshold to initiate investigations of treatment adherence or possible treatment failure. Sources of variability between VL assays include differences in technology platform, plasma input volume, and ability to detect HIV-1 subtypes. Monitoring of individual patients should be performed on the same

  6. Systematic review of the performance of HIV viral load technologies on plasma samples.

    Directory of Open Access Journals (Sweden)

    Kimberly A Sollis

    Full Text Available BACKGROUND: Viral load (VL monitoring is the standard of care in developing country settings for detecting HIV treatment failure. Since 2010 the World Health Organization has recommended a phase-in approach to VL monitoring in resource-limited settings. We conducted a systematic review of the accuracy and precision of HIV VL technologies for treatment monitoring. METHODS AND FINDINGS: A search of Medline and Embase was conducted for studies evaluating the accuracy or reproducibility of commercially available HIV VL assays. 37 studies were included for review including evaluations of the Amplicor Monitor HIV-1 v1.5 (n = 25, Cobas TaqMan v2.0 (n = 11, Abbott RealTime HIV-1 (n = 23, Versant HIV-1 RNA bDNA 3.0 (n = 15, Versant HIV-1 RNA kPCR 1.0 (n = 2, ExaVir Load v3 (n = 2, and NucliSens EasyQ v2.0 (n = 1. All currently available HIV VL assays are of sufficient sensitivity to detect plasma virus levels at a lower detection limit of 1,000 copies/mL. Bias data comparing the Abbott RealTime HIV-1, TaqMan v2.0 to the Amplicor Monitor v1.5 showed a tendency of the Abbott RealTime HIV-1 to under-estimate results while the TaqMan v2.0 overestimated VL counts. Compared to the Amplicor Monitor v1.5, 2-26% and 9-70% of results from the Versant bDNA 3.0 and Abbott RealTime HIV-1 differed by greater than 0.5log10. The average intra and inter-assay variation of the Abbott RealTime HIV-1 were 2.95% (range 2.0-5.1% and 5.44% (range 1.17-30.00% across the range of VL counts (2log10-7log10. CONCLUSIONS: This review found that all currently available HIV VL assays are of sufficient sensitivity to detect plasma VL of 1,000 copies/mL as a threshold to initiate investigations of treatment adherence or possible treatment failure. Sources of variability between VL assays include differences in technology platform, plasma input volume, and ability to detect HIV-1 subtypes. Monitoring of individual patients should be performed on the same

  7. Anesthetic management of adenoidectomy and tonsillectomy assisted by low-temperature plasma technology in children

    Directory of Open Access Journals (Sweden)

    Meng-meng LI

    2014-10-01

    Full Text Available Objective To explore the anesthetic management strategy in children undergoing adenoidectomy and tonsillectomy using low-temperature plasma technology. Methods Sixty ASA status I children scheduled for adenoidectomy and tonsillectomy with plasma technology in the First Affiliated Hospital of General Hospital of PLA from September to December of 2013 were enrolled in this study. After induction with propofol, sufentanil and cisatracurium, the children were randomly divided into combined inhalation and intravenous anesthesia group (CIIA group, n=30 and total intravenous anesthesia group (TIVA group, n=30. In CIIA group, anesthesia was maintained with continuous infusion of propofol and remifentanil combined with sevoflurane inhalation during the surgery. In TIVA group, anesthesia was maintained only with continuous infusion of propofol and remifentanil. The hemodynamic changes and time for extubation and leaving operating room were recorded, and the emergence agitation was assessed using Pediatric Anesthesia Emergence Delirium (PAED scale. Results There was no significant difference in hemodynamic changes between the two groups (P>0.05. The total dosages of propofol and remifentanil in TIVA group [10.5±3.4 mg/(kg.h and 16.1±5.3μg/(kg.h, respectively] were significantly higher than those of CIIA group [6.6±2.8 mg/(kg.h, 10.4±4.2 μg/(kg.h, P<0.05]. The times for extubation and leaving operating room were significantly shorter in TIVA group (8.8±3.7min, 6.2±2.9min than in CIIA group (19.8±4.3 min, 13.7±5.2 min, P<0.05, and the rate of emergence agitation during the recovery period in TIVA group (1/30 was significantly less than that in CIIA group (9/30, P<0.05. Conclusion  Total intravenous anesthesia with tracheal intubation could shorten the recovery time and lessen the emergence agitation during the recovery period, and it may be used as a safe, feasible and convenient anesthetic strategy for adenoidectomy and tonsillectomy with

  8. IN SITU AND EX SITU BIODEGRADATION TECHNOLOGIES FOR REMEDIATION OF CONTAMINATED SITES [ENGINEERING ISSUE)

    Science.gov (United States)

    Bioremediation is a grouping of technologies that use microbiota (typically, heterotrophic bacteria and fungi) to degrade or transform hazardous contaminants to materials such as carbon dioxide, water, inorganic salts, microbial biomass, and other byproducts that may be less haza...

  9. Information technology issues in an era of greater state responsibilities: policy concerns for seniors.

    Science.gov (United States)

    Shrewsbury, Carolyn M

    2002-01-01

    Five areas of state information technology policy are of special concern to seniors and senior service providers: obtaining access; closing the digital divide; developing information management systems; creating portals; and maintaining privacy. Increasing their activities in each of these areas, states continue to vary considerably in their responsiveness to meeting the challenge of including older adults, especially those living in rural areas, with the benefits of information technology.

  10. Nonthermal plasma technology as a versatile strategy for polymeric biomaterials surface modification: a review.

    Science.gov (United States)

    Desmet, Tim; Morent, Rino; De Geyter, Nathalie; Leys, Christophe; Schacht, Etienne; Dubruel, Peter

    2009-09-14

    In modern technology, there is a constant need to solve very complex problems and to fine-tune existing solutions. This is definitely the case in modern medicine with emerging fields such as regenerative medicine and tissue engineering. The problems, which are studied in these fields, set very high demands on the applied materials. In most cases, it is impossible to find a single material that meets all demands such as biocompatibility, mechanical strength, biodegradability (if required), and promotion of cell-adhesion, proliferation, and differentiation. A common strategy to circumvent this problem is the application of composite materials, which combine the properties of the different constituents. Another possible strategy is to selectively modify the surface of a material using different modification techniques. In the past decade, the use of nonthermal plasmas for selective surface modification has been a rapidly growing research field. This will be the highlight of this review. In a first part of this paper, a general introduction in the field of surface engineering will be given. Thereafter, we will focus on plasma-based strategies for surface modification. The purpose of the present review is twofold. First, we wish to provide a tutorial-type review that allows a fast introduction for researchers into the field. Second, we aim to give a comprehensive overview of recent work on surface modification of polymeric biomaterials, with a focus on plasma-based strategies. Some recent trends will be exemplified. On the basis of this literature study, we will conclude with some future trends for research.

  11. Synthesis and photocatalytic activity of Pt-ZnO hybrid nanocomposite by solution plasma technology

    Science.gov (United States)

    Hu, Xiulan; Xu, QiuCheng; Ge, Chao; Su, Nan; Zhang, Jianbo; Huang, Huihong; Zhu, Shoufeng; Xu, Yanqiu; Cheng, Jiexu

    2017-01-01

    In this paper, Pt-ZnO hybrid nanocomposites were prepared by solution plasma technology. X-ray diffraction (XRD) and energy dispersive x-ray analysis (EDX) were used to verify their chemical composition. The size and morphology of the Pt-ZnO hybrid nanocomposites were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). These results indicate that about 2-3 nm Pt nanoparticles (NPs) were synthesized and dispersed on the pyramid-like ZnO (20-60 nm) surface. Photodegradation of Rhodamine B (RhB) demonstrates that the Pt (5 wt%)-ZnO hybrid nanocomposite has better photocatalytic activity than commercial P25 because Pt NPs restrain the photogenerated electron/hole recombination and increase the catalyst activity.

  12. Synthesis and photocatalytic activity of Pt-ZnO hybrid nanocomposite by solution plasma technology.

    Science.gov (United States)

    Hu, Xiulan; Xu, QiuCheng; Ge, Chao; Su, Nan; Zhang, Jianbo; Huang, Huihong; Zhu, Shoufeng; Xu, Yanqiu; Cheng, Jiexu

    2017-01-27

    In this paper, Pt-ZnO hybrid nanocomposites were prepared by solution plasma technology. X-ray diffraction (XRD) and energy dispersive x-ray analysis (EDX) were used to verify their chemical composition. The size and morphology of the Pt-ZnO hybrid nanocomposites were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). These results indicate that about 2-3 nm Pt nanoparticles (NPs) were synthesized and dispersed on the pyramid-like ZnO (20-60 nm) surface. Photodegradation of Rhodamine B (RhB) demonstrates that the Pt (5 wt%)-ZnO hybrid nanocomposite has better photocatalytic activity than commercial P25 because Pt NPs restrain the photogenerated electron/hole recombination and increase the catalyst activity.

  13. Review on Improving Wear and Corrosion Resistance of Steels via Plasma Electrolytic Saturation Technology

    Science.gov (United States)

    Lin, Naiming; Xie, Ruizhen; Zhou, Peng; Zou, Jiaojuan; Ma, Yong; Wang, Zhenxia; Han, Pengju; Wang, Zhihua; Tang, Bin; Tian, Wei

    2016-03-01

    Plasma electrolytic saturation (PES) technique which holds the advantages of short treating time and limited heating influence and immediate quenching effect is conducted under high voltage power supply in some electrolyte has been extensively applied to enhance the surface performance of metallic materials. Steel is widely used in various fields thanks to its promising merits of easy workability, plasticity, toughness and weldability. It accounts for a large proportion in the application scope of the metal materials. Steel surfaces with good corrosion resistance, promising wear resistance and high hardness would be obtained by PES. Meanwhile, uniformed coatings can be formed without special requirements for substrate geometries using the PES. This paper first presents a brief introduction of the technological principle of PES. The status on studies and applications of PES for improving surface performance of steels has been reviewed.

  14. Agricultural and Food Processing Applications of Pulsed Power and Plasma Technologies

    Science.gov (United States)

    Takaki, Koichi

    Agricultural and food processing applications of pulsed power and plasma technologies are described in this paper. Repetitively operated compact pulsed power generators with a moderate peak power are developed for the agricultural and the food processing applications. These applications are mainly based on biological effects and can be categorized as germination control of plants such as Basidiomycota and arabidopsis inactivation of bacteria in soil and liquid medium of hydroponics; extraction of juice from fruits and vegetables; decontamination of air and liquid, etc. Types of pulsed power that have biological effects are caused with gas discharges, water discharges, and electromagnetic fields. The discharges yield free radicals, UV radiation, intense electric field, and shock waves. Biologically based applications of pulsed power and plasma are performed by selecting the type that gives the target objects the adequate result from among these agents or byproducts. For instance, intense electric fields form pores on the cell membrane, which is called electroporation, or influence the nuclei. This paper mainly describes the application of the pulsed power for the germination control of Basidiomycota i.e. mushroom, inactivation of fungi in the soil and the liquid medium in hydroponics, and extraction of polyphenol from skins of grape.

  15. Application of thermal plasma technology for the treatment of solid wastes in China: An overview.

    Science.gov (United States)

    Li, Jun; Liu, Kou; Yan, Shengjun; Li, Yaojian; Han, Dan

    2016-12-01

    With its enormous social and economical development, China is now experiencing a rapid increase in solid wastes generation and growing pressure for solid wastes management. Today solid wastes in China are mainly managed by a combination of landfill, incineration, and composting. Within different possible treatment routes, thermal plasma technology (TPT) offers the advantages of efficiently gasifying the organic contents of solid wastes into syngas that can be used for heat and power generation, and vitrifying the inorganics simultaneously into glassy slag with very low leachabilities. This process makes it feasible for near-zero emission into the environment while making use of all the useful components. Encouraged by the industrial operations of solid wastes treatment plants using TPT in some countries, several plasma demonstration projects have already been undertaken in China. This paper provides a preliminary overview of the current laboratory researches and industrial developments status of TPT for the treatment of solid wastes in China and analyzes the existing challenges. Furthermore, the future prospects for TPT in China are also discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Colleges of Applied Arts and Technology of Ontario. Background Papers on Current Issues.

    Science.gov (United States)

    Association of Colleges of Applied Arts and Technology of Ontario, Willowdale.

    Background information is provided on a number of conditions affecting Ontario's community colleges. The first section, dealing with financial issues, considers the college environment in the 1980s; examines the provincial government's perspective on priorities, the allocation process, government funding, and budgetary expenditures and trends; and…

  17. The Technology of Teacher Licensing Testing: A Discussion of Issues and Recommendations for Practice.

    Science.gov (United States)

    Crehan, Kevin D.; Hess, Robert K.; D'Agostino, Jerome V.

    This paper focuses on teacher testing issues related to job analysis, test specification development, reliability, and validity. It emphasizes the conceptualization and operational definition of appropriate validity evidence to assess the quality of licensure testing decisions. It is suggested that the process of job, or practice, analysis would…

  18. Critical issues for the application of integrated MEMS/CMOS technologies to inertial measurement units

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.H.; Ellis, J.R.; Montague, S.; Allen, J.J.

    1997-03-01

    One of the principal applications of monolithically integrated micromechanical/microelectronic systems has been accelerometers for automotive applications. As integrated MEMS/CMOS technologies such as those developed by U.C. Berkeley, Analog Devices, and Sandia National Laboratories mature, additional systems for more sensitive inertial measurements will enter the commercial marketplace. In this paper, the authors will examine key technology design rules which impact the performance and cost of inertial measurement devices manufactured in integrated MEMS/CMOS technologies. These design parameters include: (1) minimum MEMS feature size, (2) minimum CMOS feature size, (3) maximum MEMS linear dimension, (4) number of mechanical MEMS layers, (5) MEMS/CMOS spacing. In particular, the embedded approach to integration developed at Sandia will be examined in the context of these technology features. Presently, this technology offers MEMS feature sizes as small as 1 {micro}m, CMOS critical dimensions of 1.25 {micro}m, MEMS linear dimensions of 1,000 {micro}m, a single mechanical level of polysilicon, and a 100 {micro}m space between MEMS and CMOS. This is applicable to modern precision guided munitions.

  19. Critical issues for the application of integrated MEMS/CMOS technologies to inertial measurement units

    Science.gov (United States)

    Smith, James H.; Montague, Stephen; Allen, James J.; Ellis, J. R.; Burgett, Scott M.

    1997-06-01

    One of the principal applications of monolithically integrated micromechanical/microelectronic systems has been accelerometers for automotive applications. As integrated MEMS/CMOS technologies such as those developed by U.C. Berkeley, Analog Devices, and Sandia National Laboratories mature, additional systems for more sensitive inertial measurements will enter the commercial marketplace. In this paper, we will examine the key technology design rules which impact the performance and cost of inertial measurement devices manufactured in integrated MEMS/CMOS technologies. These design parameters include: (1) Minimum MEMS feature size, (2) Minimum CMOS feature size, (3) Maximum MEMS linear dimension, (4) Number of mechanical MEMS layers, and (5) MEMS/CMOS spacing. In particular, the embedded approach to integration developed at Sandia will be examined in the context of these technology features. Presently, this technology offers MEMS feature sizes as small as 1 micrometers , CMOS critical dimensions of 1.25 micrometers , MEMS linear dimensions of 1000 micrometers , a single mechanical level of polysilicon, and a 100 micrometers space between MEMS and CMOS.

  20. Coupling renewables via hydrogen into utilities: Temporal and spatial issues, and technology opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Iannucci, J.J.; Horgan, S.A.; Eyer, J.M. [Distributed Utility Associates, San Ramon, CA (United States)] [and others

    1996-10-01

    This paper discusses the technical potential for hydrogen used as an energy storage medium to couple time-dependent renewable energy into time-dependent electric utility loads. This analysis will provide estimates of regional and national opportunities for hydrogen production, storage and conversion, based on current and near-term leading renewable energy and hydrogen production and storage technologies. Appropriate renewable technologies, wind, photovoltaics and solar thermal, are matched to their most viable regional resources. The renewables are assumed to produce electricity which will be instantaneously used by the local utility to meet its loads; any excess electricity will be used to produce hydrogen electrolytically and stored for later use. Results are derived based on a range of assumptions of renewable power plant capacity and fraction of regional electric load to be met (e.g., the amount of hydrogen storage required to meet the Northwest region`s top 10% of electric load). For each renewable technology national and regional totals will be developed for maximum hydrogen production per year and ranges of hydrogen storage capacity needed in each year (hydroelectric case excluded). The sensitivity of the answers to the fraction of peak load to be served and the land area dedicated for renewable resources are investigated. These analyses can serve as a starting point for projecting the market opportunity for hydrogen storage and distribution technologies. Sensitivities will be performed for hydrogen production, conversion. and storage efficiencies representing current and near-term hydrogen technologies.

  1. Depolymerization of the waste polymers in municipal solid waste streams using induction-coupled plasma technology

    Science.gov (United States)

    Guddeti, Ravikishan Reddy

    2000-10-01

    A significant, valuable percentage of today's municipal solid waste stream consists of polymeric materials, for which almost no economic recycling technology currently exists. This polymeric waste is incinerated, landfilled or recycled via downgraded usage. Thermal plasma treatment is a potentially viable means of recycling these materials by converting them back into monomers or into other useful compounds. The technical, laboratory scale, feasibility of using an induction-coupled RF plasma [ICP] heated reactor for this purpose has been demonstrated in the present study. Polyethylene [PE], polypropylene [PP] and polyethylene terephthalate [PET], the model polymers chosen for the study, were injected axially through the center of an ICP torch. 68% of PE, 78% of PP and 75% of PET were converted into gaseous products. Ethylene and propylene were the primary gaseous products of decomposition of the former two polymers and acetylene was the primary product of the depolymerization of PET. The amount of propylene obtained in PE depolymerization was significantly higher than anticipated and was believed to be due to beta-scission reactions occurring at the high plasma temperatures. Statistical design of experiments was used to determine the influence of individual variables. Analysis of results showed that plasma plate power, central gas flow rate, probe gas flow rate, powder feed rate and the interaction between the quench gas flow rate and power input were the key process parameters affecting the yield of monomer in the product gas stream. Depolymerization of a PE + PP mixture yielded concentrations of propylene and ethylene close to those predicted from weighting the concentrations of products from the individual polymers. 75.5 wt.% of the mixture was converted into monomers. TEM analysis of the carbon residues collected from different locations of the reactor indicated the formation of some novel carbon structures, including carbon nanotubes. The presence of these

  2. Pervasive and Mobile Sensing and Computing for Healthcare Technological and Social Issues

    CERN Document Server

    Postolache, Octavian

    2013-01-01

    The pervasive healthcare system focus towards achieving two specific goals: the availability of eHealth applications and medical information anywhere and anytime and the invisibility of computing. Furthermore, pervasive health system encompasses new types of sensing and communication of health information as well as new type of interactions among health providers and people, among patients, among patients and researchers and patients and corporations. This book aims at promoting the discussion on current trends in technologies and concepts that help integrate health monitoring and healthcare more seamlessly to our everyday lives, regardless of space and time, but also present cutting edge perspectives and visions to highlight future development. The book presents not only the state of the art technologies and solutions to tackle the critical challenges faced by the building and development of the pervasive health system but also potential impact on society at social, medical and technological level.   

  3. APEC energy security and sustainable development through efficiency and diversity - economic issues in technology R & D, adoption and transfer

    Energy Technology Data Exchange (ETDEWEB)

    Hogan, L.; Curtotti, R.; Austin, A.

    2007-04-15

    The Asia Pacific Economic Cooperation forum (APEC) has an important role to play in strengthening regional economic cooperation and in addressing the regional energy security and sustainable energy development issues that have become more prominent in recent years. Key objectives in this report are to present an overview of the challenges facing APEC economies in meeting the region's growing energy requirements, with a focus on the energy requirements of the APEC stationary energy sector, and to assess the role that cleaner fuels and energy technologies can play in achieving a more secure and sustainable energy sector in the APEC region. The report also examines barriers to investment and policy options that encourage the development and deployment of energy technologies that can enhance energy security and environmental sustainability in the APEC region. Appendix D deals with coal fired power generation technologies. The report was prepared in anticipation of the eighth meeting of the APEC Energy Ministers Meeting. To support energy policy formulation by energy ministers, relevant background information is provided on clean and energy efficient technologies, alternative and renewable fuels, and environmentally sustainable energy technologies. 59 refs., 24 figs., 19 tabs., 5 apps.

  4. Status and issue of coal mine safety technology development in Japan and international co-operation

    Energy Technology Data Exchange (ETDEWEB)

    Nakmura, K. [Ministry of International Trade and Industry, Tokyo (Japan). Mine Safety Division, Environmental Protection and Industrial Location Bureau

    2001-03-01

    Recent trends in coal mine accidents in Japan are reviewed and the incident of mine fire at the Ikeshima coal mine in Nagasaki Prefecture in February 2000 reported. An overview is given of safety projects underway in Japan or jointly with Australia. Cooperative projects to prevent spontaneous combustion to develop underground monitoring techniques, and to transfer safety technologies from Japan abroad are outlined. Other projects carried out by the Japan International Cooperation Agency (JICA) are listed. Japan's long-term policy for safety technology development is outlined. 4 figs., 6 tabs.

  5. A Holistic Approach for Addressing the Issue of Effective Technology Transfer in the Frame of Climate Change

    Directory of Open Access Journals (Sweden)

    Charikleia Karakosta

    2016-06-01

    Full Text Available Climate change policy and sustainable development issues and goals are closely intertwined. Recognizing the dual relationship between sustainable development and climate change points to a need for the exploration of actions that jointly address sustainable development and climate change. Technology transfer is considered an issue with growing interest worldwide and has been recognized as the key in supporting countries to achieve sustainable development, while addressing climate change challenges. This study presents an integrated decision support methodological framework for the formulation and evaluation of activities to promote technology transfer, as well as the provision of clear recommendations and strategies for framing specific policy in the context of climate change. The philosophy of the proposed approach, under the name: assess-identify-define (AID, consists of three components, where each one focuses on a particular problem. The methodology is integrated using appropriate tools in the information decision support system for effective technology transfer (DSS-ΕTT. The pilot application of the proposed methodology, in five representative developing countries, provided the possibility to evaluate the characteristics of the adopted methodology in terms of completeness, usability, extensionality, as well as analysis of results reliability.

  6. EDITORIAL: Special section on the physics and technology of plasma heating by ICRF power

    Science.gov (United States)

    Noterdaeme, Jean-Marie; Van Eester, Dirk

    2006-07-01

    This special section brings together much of what is currently at the forefront of ion cyclotron resonance frequency (ICRF) research. Which theories are people working on? Where is progress being made? What results are being obtained? The present Nuclear Fusion section on ICRF is not—and was explicitly meant not to be—an overview or review of ICRF systems, research achievements or theories. It is more a snapshot of the leading edge of the investigations. It is based, in part, on presentations to the 16th Topical Conference on RF Power in Plasmas, Park City, Utah, USA, April 2005. The forefront of ICRF research currently being actively pursued covers a wide range of topics: theoretical, experimental and technological. As can be expected, most of the papers in this section have direct relevance to ITER. Elements that will be important in ITER, and that are being addressed and developed in the papers, are the presence of fast particles with their influence on wave propagation and damping, the non-linear mechanisms in the edge—in particular close to the wave launcher—and steady-state aspects. Specific ITER components as well as RF scenarios are studied. Continued efforts to improve the analytical description of wave damping and absorption and the availability of gradually more powerful computers led to significant progress in incorporating the effect of particles with non-thermal velocity distributions—the presence of which has already become significant in present-day machines due to massive RF and/or NBI heating which forces the particles away from thermo-dynamical equilibrium (Brambilla et al, Jaeger et al). The exact role that RF-created and fusion-born fast particles will play is still a matter of lively debate. As shown in the papers by Choi et al and Pinsker et al, the presence of energetic particles is a significant factor in the wave absorption, even at high harmonics. Accounting for the actual magnetic topology allows the capture of RF induced

  7. Increased Oxygen Recovery from Sabatier Systems Using Plasma Pyrolysis Technology and Metal Hydride Separation

    Science.gov (United States)

    Greenwood, Zachary W.; Abney, Morgan B.; Perry, Jay L.; Miller, Lee A.; Dahl, Roger W.; Hadley, Neal M.; Wambolt, Spencer R.; Wheeler, Richard R.

    2015-01-01

    State-of-the-art life support carbon dioxide (CO2) reduction technology is based on the Sabatier reaction where less than 50% of the oxygen required for the crew is recovered from metabolic CO2. The reaction produces water as the primary product and methane as a byproduct. Oxygen recovery is constrained by the limited availability of reactant hydrogen. This is further exacerbated when Sabatier methane (CH4) is vented as a waste product resulting in a continuous loss of reactant hydrogen. Post-processing methane with the Plasma Pyrolysis Assembly (PPA) to recover hydrogen has the potential to dramatically increase oxygen recovery and thus drastically reduce the logistical challenges associated with oxygen resupply. The PPA decomposes methane into predominantly hydrogen and acetylene. Due to the highly unstable nature of acetylene, a separation system is necessary to purify hydrogen before it is recycled back to the Sabatier reactor. Testing and evaluation of a full-scale Third Generation PPA is reported and investigations into metal hydride hydrogen separation technology is discussed.

  8. Structural Analysis of the Global Multimedia Scenario: Technological, Market, Environmental, and Regulatory Issues.

    Science.gov (United States)

    Nicolo, Enrico; Sapio, Bartolomeo

    1996-01-01

    Presents a strategic evaluation of the global multimedia scenario, considering both stand-alone workstations and distributed multimedia in the worldwide interactive network, including educational databases on the Internet. Discusses 50 technological, market, environmental, and regulatory factors and estimates their impacts on each other using WISE…

  9. Do We Give It to Them, and What Happens If We Do? Issues Concerning Technology Transfers

    Science.gov (United States)

    2008-05-22

    even for government purposes, causing firearms to nearly vanish from Japan. The samurai controlled government refrained from adopting this new...apparently effective technology because it contrasted with the historic samurai culture. The firearm was denigrated to the point of near extinction

  10. Didactics of Information Technology (IT) in a Science Degree: Conceptual Issues and Practical Application

    Science.gov (United States)

    Miliszewska, Iwona; Venables, Anne; Tan, Grace

    2010-01-01

    Information technology has been transforming various disciplines of life sciences and physical sciences as a tool (for "doing" science) and a technique (for conducting experiments and creating models). This evolution in the application of IT in science demands that science students be equipped with appropriate IT skills and that the…

  11. Critical issues in medical education and the implications for telemedicine technology.

    Science.gov (United States)

    Mahapatra, Ashok Kumar; Mishra, Saroj Kanta; Kapoor, Lily; Singh, Indra Pratap

    2009-01-01

    Ensuring quality medical education in all the medical colleges across India based on uniform curriculum prescribed by a regulatory body and maintaining a uniform standard are dependent on availability of an excellent infrastructure. Such infrastructure includes qualified teachers, knowledge resources, learning materials, and advanced education technology, which is a challenge in developing countries due to financial and logistic constraints. Advancement in telecommunication, information science, and technology provides an opportunity to exchange knowledge and skill across geographically dispersed organizations by networking academic medical centers of excellence with medical colleges and institutes to practice distance learning using information and communication technology (ICT)-based tools. These may be as basic as commonly used Web-based tools or may be as advanced as virtual reality, simulation, and telepresence-based collaborative learning environment. The scenario in India is no different from any developing country, but there is considerable progress due to technical advancement in these sectors. Telemedicine and tele-education in health science, is gradually getting adopted into the Indian Health System after decade-long pilot studies across the country. A recent recommendation of the National Knowledge Commission, once implemented, would ensure a gigabyte network across all the educational institutions of the country including medical colleges. Availability of indigenous satellite communication technology and the government policy of free bandwidth provision for societal development sector have added strength to set up infrastructure to pilot several telemedicine educational projects across the country.

  12. Assistive Technology for Students with Disabilities: A Legal Analysis of Issues

    Science.gov (United States)

    Etscheidt, Susan Larson

    2016-01-01

    Individualized Education Program (IEP) teams are required by the Individuals with Disabilities Education Act (IDEA) to consider a student's need for assistive technology (AT). Despite this legal requirement, AT supports are often not available to students with disabilities. Many students with disabilities and their families have addressed the…

  13. Ethical Issues Related to the Use/Non-Use of Assistive Technologies

    Science.gov (United States)

    Cook, Albert M.

    2009-01-01

    Assistive technologies (AT) can provide significant assistance in accomplishing the tasks of daily living for persons who have disabilities. Five types of ethical principles underlie the distribution and use of AT: beneficence, nonmaleficence, justice, autonomy and fidelity. Beneficence, nonmaleficence, and justice, most directly affect the…

  14. International Linear Collider Steering Committee issues charge to Technology Recommendation Panel

    CERN Multimedia

    2003-01-01

    "Following its November 19 meeting in Paris, the International Linear Collider Steering Committee, a subcommittee of the International Committee for Future Accelerators, has published the charge http://www.fnal.gov/directorate/icfa/ITRP_Charge.pdf to the International Technology Recommendation Panel appointed by ICFA" (2 paragraphs).

  15. Science and Technology Issues Relating to Data Quality in C2 Systems

    Science.gov (United States)

    2011-06-01

    University, Center for Technology and National Security Policy: Fort Lesley J. McNair, Washington, DC, 20319. 28. MacPherson, M., Roberts Ridge : A Story of...Army. 34. Allen, M.D., C. Macheret, and M.A. Malloy , C2 Core and UCore Message Design Capstone: Interoperable Message Structure. 2009. 35. Guthrie

  16. Current Issues and Trends in Multidimensional Sensing Technologies for Digital Media

    Science.gov (United States)

    Nagata, Noriko; Ohki, Hidehiro; Kato, Kunihito; Koshimizu, Hiroyasu; Sagawa, Ryusuke; Fujiwara, Takayuki; Yamashita, Atsushi; Hashimoto, Manabu

    Multidimensional sensing (MDS) technologies have numerous applications in the field of digital media, including the development of audio and visual equipment for human-computer interaction (HCI) and manufacture of data storage devices; furthermore, MDS finds applications in the fields of medicine and marketing, i.e., in e-marketing and the development of diagnosis equipment.

  17. IEA Wind Task 23 Offshore Wind Technology and Deployment. Subtask 1 Experience with Critical Deployment Issues. Final Technical Report

    DEFF Research Database (Denmark)

    Lemming, Jørgen Kjærgaard

    The final report for IEA Wind Task 23, Offshore Wind Energy Technology and Deployment, is made up of two separate reports: Subtask 1: Experience with Critical Deployment Issues and Subtask 2: Offshore Code Comparison Collaborative (OC3). The Subtask 1 report included here provides background...... information and objectives of Task 23. It specifically discusses ecological issues and regulation, electrical system integration and offshore wind, external conditions, and key conclusions for Subtask 1. The Subtask 2 report covers OC3 background information and objectives of the task, OC3 benchmark exercises...... of aero-elastic offshore wind turbine codes, monopile foundation modeling, tripod support structure modeling, and Phase IV results regarding floating wind turbine modeling....

  18. Experimental research of pulsed discharge plasma and TiO2/Zeolite coupling technology for formaldehyde removal

    Science.gov (United States)

    Dong, Bingyan; Lan, Shuirong

    2013-03-01

    The pulsed discharge plasma combining with catalyst to remove formaldehyde is a novel type of advanced oxidation technology. In the present work, taking wire-tube pulsed discharge plasma and TiO2/Zeolite coupling technology for formaldehyde removal. The studies have investigated the wire-tube reactor with zeolite, TiO2, TiO2/Zeolite for formaldehyde removal respectively. Results show that in the optimal experimental conditions and the baking time is 120 min, the baking temperature is 450 °C, that TiO2/Zeolite catalyst which made by sol-gel shows higher photocatalytic activity and efficiency. The pulsed discharge with TiO2/Zeolite catalyst for formaldehyde removal has higher removal efficiency than pulsed discharge with zeolite or TiO2. Therefore, pulsed discharge plasma with TiO2/Zeolite for the removal of formaldehyde can greatly increase the removal efficiency.

  19. Advances in physical study of high enthalpy plasma jets of technological interest: emission spectra and plasma characteristics

    Science.gov (United States)

    Belevtsev, A. A.; Chinnov, V. F.; Isakaev, E. Kh.; Markin, A. V.; Tazikova, T. F.; Tereshkin, S. A.

    1998-10-01

    Offers a comprehensive study of the emission spectra and plasma characteristics of high enthalpy atmospheric pressure argon and nitrogen jets produced by a high- current industrially important arc plasmatron with a vortex stabilized channel-anode (I4g/s, jet diameter at a minimum-6mm). The spectra are taken at different distances from the cathode in the 200-950nm region with a spectral resolution=3D0.01nm allowing a fine structure of vibronic bands to be essentially resolved except that due to the dublet (spin) splitting and Λ-doubling. Also derived (through the Abel inversion) are radial distributions of plasma components. The spectra obtained have been used for determining plasma composition, the electron component parameters (by atomic/ionic Stark half-widths and intensities) and the assessment of rotational and vibrational temperatures by simulating molecular bands.

  20. [Early signs of the effect of complex occupational factors of plasma technology on the workers' health status].

    Science.gov (United States)

    Sineva, E L; Il'nitskaia, A V; Marushkin, V E

    1991-01-01

    The article reports the results of health-related studies among workers engaged in plasma technology processes. It was found that the earliest indicators of health changes in the workers revealed themselves in the vegetative nervous system and vestibulocochlear function combined with subatrophic++ changes in the respiratory mucous membranes.

  1. Some issues involved in designing a 1 TeV (c. m. ) e/sup + -/ linear collider using conventional technology

    Energy Technology Data Exchange (ETDEWEB)

    Loew, G.A.

    1986-02-01

    Some of the crucial issues are discussed which are raised when one wants to use conventional technology to design a 1 TeV electron-positron linear collider with a luminosity of 2 x 10/sup 32/ cm/sup -2/sec/sup -1/. By conventional technology is meant that the process of acceleration is achieved as is usual in common electron linacs - namely that the electron and positron bunches receive their energy from rf fields stored in copper structures at room temperature. The beam-related problems and linac-related problems are treated separately. What happen as one goes to gradients and frequencies higher that those of the SLC are considered, in an attempt to decrease overall length and power consumption. The rf and other problems that one confronts as one goes to higher energies are illustrated. 19 refs., 12 figs., 2 tabs. (LEW)

  2. Delivering drugs to the central nervous system: a medicinal chemistry or a pharmaceutical technology issue?

    Science.gov (United States)

    Ricci, Maurizio; Blasi, Paolo; Giovagnoli, Stefano; Rossi, Carlo

    2006-01-01

    This review aims to summarize the non-invasive approaches employed in delivering drugs to the central nervous system which is severely hindered by the presence of the blood-brain barrier (BBB) that limits molecular permeation. Particular attention will be placed on the several available strategies for delivering drugs into the brain, through circumvention of the BBB, in order to critically address the medicinal chemistry and the pharmaceutical technology contributions.

  3. The Bayh-Dole Act: Selected Issues in Patent Policy and the Commercialization of Technology

    Science.gov (United States)

    2009-02-03

    Perhaps most illustrative of the influence of the Bayh-Dole Act on small business is the biotechnology industry . According to Dr. Bernadine Healy...sector.65 The biotechnology industry primarily is composed of small firms that are developing technologies and techniques derived from R&D funded by NIH...important as an economic force in our economy.... ”68 In a report by Battelle for the Biotechnology Industry Organization (BIO), analysts found that

  4. Technology, Implementation and Policy Issues for the Modernisation of GPS and its Role in a GNSS

    Science.gov (United States)

    McDonald, Keith D.

    1998-09-01

    This and the following six papers were selected from the many papers presented at the 9th World Congress of the International Association of Institutes of Navigation (IAIN) held in Amsterdam, The Netherlands, 17-21 November 1997.During the past several years, a number of important investigations, policy initiatives and national commitments relating to the future of GPS, GLONASS and their augmentations have occurred. Substantive and on-going studies of the character and configuration of a Global Navigation Satellite System (GNSS) have also been evaluated worldwide, especially by the International Civil Aviation Organization (ICAO). These efforts have been principally directed toward the definition of near- and far-term GNSS implementations that meet the needs and concerns of the international community. This paper briefly reviews some of the investigations and addresses, in particular, the concerns and requirements that may affect the future capabilities and the dual (civil/military) character of GPS. The main issues relating to the modernisation of GPS and its subsequent transition to a component of a GNSS with a viable international character are presented. These include a discussion of new signal structure options, certain changes in operating frequencies, increased signal power levels, other system alternatives and their potential impact on system performance. International issues are briefly addressed, including future performance capabilities, assurance of service, economic participation and benefit, reasonable cost, standards and international participation.

  5. Syngas production for gas-to-liquids applications. Technologies, issues and outlook

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelm, D.J.; Simbeck, D.R.; Karp, A.D.; Dickenson, R.L. [SFA Pacific, Inc., 444 Castro St., Suite 720, 94041 Mountain View, CA (United States)

    2001-06-01

    The main gas-to-liquids (GTL) interest now is in Fischer-Tropsch (F-T) synthesis of hydrocarbons. While synthesis gas (syngas) for GTL can be produced from any carbon-based feedstock (hydrocarbons, coal, petroleum coke, biomass), the lowest cost routes to syngas so far are based on natural gas. Thus, the focus for GTL has been largely on associated gas, so-called stranded or remotely located gas reserves, and larger gas reserves that are not currently being economically exploited. The principal technologies for producing syngas from natural gas are: catalytic steam methane reforming (SMR), two-step reforming, autothermal reforming (ATR), partial oxidation (POX), and heat exchange reforming. The distinguishing characteristics of these technologies and their commercial uses are discussed in this paper. Ongoing R and D efforts to develop lower-cost syngas generation technologies are also briefly discussed. Relevant commercial experience with large-scale syngas generation for GTL is also discussed. As a frame of reference, in terms of syngas flow rates, a 20,000 b/day F-T plant would be comparable to three 2500 mt/day methanol plants. Single-train methanol plants are now producing more than 2500 t/day-and plants approaching 3000 mt/day have been announced. The projected relative economies of scale of the various syngas production technologies indicate that two-step reforming and ultimately, ATR, should be the technologies of choice for large-scale GTL plants. Nevertheless, for a 20,000 b/day F-T liquids plant, capital charges still dominate the manufacturing costs. Syngas production (oxygen plant and reforming) comprises half of the total capital cost of this size GTL plant. While air-blown reforming eliminates the expensive oxygen plant, air-blown reforming is unlikely to be competitive with, or offer the flexibility of, oxygen-blown reforming. The reasons for this conclusion are discussed. The proposed and future GTL facilities should be substantially less costly

  6. Syngas production for gas-to-liquids applications. Technologies, issues and outlook

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelm, D.J.; Simbeck, D.R.; Karp, A.D.; Dickenson, R.L. [SFA Pacific, Inc., 444 Castro St., Suite 720, 94041 Mountain View, CA (United States)

    2001-06-01

    The main gas-to-liquids (GTL) interest now is in Fischer-Tropsch (F-T) synthesis of hydrocarbons. While synthesis gas (syngas) for GTL can be produced from any carbon-based feedstock (hydrocarbons, coal, petroleum coke, biomass), the lowest cost routes to syngas so far are based on natural gas. Thus, the focus for GTL has been largely on associated gas, so-called stranded or remotely located gas reserves, and larger gas reserves that are not currently being economically exploited. The principal technologies for producing syngas from natural gas are: catalytic steam methane reforming (SMR), two-step reforming, autothermal reforming (ATR), partial oxidation (POX), and heat exchange reforming. The distinguishing characteristics of these technologies and their commercial uses are discussed in this paper. Ongoing R and D efforts to develop lower-cost syngas generation technologies are also briefly discussed.Relevant commercial experience with large-scale syngas generation for GTL is also discussed. As a frame of reference, in terms of syngas flow rates, a 20,000 b/day F-T plant would be comparable to three 2500 mt/day methanol plants. Single-train methanol plants are now producing more than 2500 t/day-and plants approaching 3000 mt/day have been announced. The projected relative economies of scale of the various syngas production technologies indicate that two-step reforming and ultimately, ATR, should be the technologies of choice for large-scale GTL plants. Nevertheless, for a 20,000 b/day F-T liquids plant, capital charges still dominate the manufacturing costs. Syngas production (oxygen plant and reforming) comprises half of the total capital cost of this size GTL plant. While air-blown reforming eliminates the expensive oxygen plant, air-blown reforming is unlikely to be competitive with, or offer the flexibility of, oxygen-blown reforming. The reasons for this conclusion are discussed.The proposed and future GTL facilities should be substantially less costly than

  7. Optical waveguiding and applied photonics technological aspects, experimental issue approaches and measurements

    CERN Document Server

    Massaro, Alessandro

    2012-01-01

    Optoelectronics--technology based on applications light such as micro/nano quantum electronics, photonic devices, laser for measurements and detection--has become an important field of research. Many applications and physical problems concerning optoelectronics are analyzed in Optical Waveguiding and Applied Photonics.The book is organized in order to explain how to implement innovative sensors starting from basic physical principles. Applications such as cavity resonance, filtering, tactile sensors, robotic sensor, oil spill detection, small antennas and experimental setups using lasers are a

  8. Development of Animation Education Issues and the Solutions with the Combination of Computer Technology

    Institute of Scientific and Technical Information of China (English)

    Xinchen HE

    2015-01-01

    This paper argues that the development of modern animation education of social concern, animation education should reflect the characteristics of the times. With the development of the law of computer technology, it is to develop appropriate education and training goals, openness of modern education, diversity, combined with interactive features such as animation education laws governing the operation of the market in order to achieve quality education of animation education. Emphasizes the comprehensive development and training of talents with professional qualities, is the only way for the development of Chinese animation.

  9. Special Issue: Software-engineering, Properites of Language and Aspect Technologies

    DEFF Research Database (Denmark)

    Bergmans, Lodewijk; Gybels, Kris; Ernst, Erik

    2008-01-01

    engineering activities and products is often a question of balancing contradictory forces and ideals. It is therefore also critical to understand these trade-offs. Aspect technologies aim also particularly at the improvement of software engineering properties, especially the above mentioned modularity...... of pointcuts, and the complexity of novel and innovative general-purpose pointcut languages. This paper proposes an interface for user-defined pointcuts, which allows for the definition of new, possibly domain-specific, kinds of pointcuts without extending the language. The second paper, "Developing Law...

  10. NEW HOPE AND TECHNOLOGICAL ISSUES ON VOICE AND VIDEO OVER ATM

    Directory of Open Access Journals (Sweden)

    Dr.S.S.Riaz Ahamed

    2010-12-01

    Full Text Available Changes in the structure of the telecommunications industry and market conditions have brought new opportunities and challenges for network operators and public service providers. Networks that have been primarily focused on providing better voice services are evolving to meet new multimedia communications challenges and competitive pressures. Services based on asynchronous transfer mode (ATM provide the flexible infrastructure essential for success in this evolving market. ATM, which was once envisioned as the technology of future public networks, is now a reality, with service providers around the world introducing and rolling out ATM and ATM–based services.

  11. The Third Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies

    Directory of Open Access Journals (Sweden)

    P. Justin eRossi

    2016-04-01

    Full Text Available This review summarizes the most contemporary clinical, electrophysiological, imaging, and computational work on DBS for the treatment of neurological and neuropsychiatric disease. Significant innovations of the past year are emphasized; these advances were presented at the 3rd Annual Deep Brain Stimulation Think Tank. The Think Tank’s contributors represent a unique multidisciplinary ensemble of expert neurologists, neurosurgeons, neuropsychologists, psychiatrists, scientists, engineers, and members of industry. Presentations and discussions covered a broad range of topics, including policy and advocacy considerations for the future of DBS, connectomic approaches to DBS targeting, developments in electrophysiology and related strides toward responsive DBS systems, and recent developments in sensor and device technologies.

  12. Spanish Secondary-School Science Teachers' Beliefs About Science-Technology-Society (STS) Issues

    Science.gov (United States)

    Vázquez-Alonso, Ángel; García-Carmona, Antonio; Manassero-Mas, María Antonia; Bennàssar-Roig, Antoni

    2013-05-01

    This study analyzes the beliefs about science-technology-society, and other Nature of Science (NOS) themes, of a large sample (613) of Spanish pre- and in-service secondary education teachers through their responses to 30 items of the Questionnaire of Opinions on Science, Technology and Society. The data were processed by means of a multiple response model to generate the belief indices used as the bases for subsequent quantitative and qualitative analyses. Other studies have reported a negative profile of teachers' understanding in this area, but the diagnosis emerging from the present work is more complex. There was a mix of appropriate beliefs coexisting with others that are inappropriate on the topics analyzed. The overall assessment, however, is negative since clearly teachers need to have a better understanding of these questions. There were scant differences between the pre- and in-service teachers, and hence no decisive evidence that the practice of teaching contributes to improving the in-service teachers' understanding. These results suggest there is an urgent need to bring the initial and continuing education of science teachers up to date to improve their understanding of these topics of science curricula, and thus improve the teaching of science.

  13. Issues involved in attempting to develop independent learning in pupils working on technological projects

    Science.gov (United States)

    Barak, Moshe

    2004-02-01

    This research addresses the impact of technological projects at high school on pupils' learning. The participants were sixty low-mid achieving pupils who worked for one year on final projects for matriculation exams. Data were collected through observations of laboratory lessons, interviews with pupils and teachers, and analysis of pupils' projects and portfolios. In the modern technological laboratory, pupils experience design, construction and improvement of sophisticated systems, in a rich learning environment. From being fully dependent on their teachers, pupils might gradually develop to become more autonomous learners and creative thinkers. A three-stage model is suggested aimed to help teachers adjust their supervision approach to the pupils' conceptual development. A pupil at the 'show me' stage needs a 'direct supervision' approach; a pupil at the 'let's think together' stage needs a 'collaborative supervision' approach; a pupil at the 'trust me' stage needs a 'nondirective supervision'. In projects carried out within mandatory exams, pupils are motivated not only by internal rewards, but also by being evaluated objectively and awarded a formal credit for their achievements.

  14. Lymph node-positive prostate cancer: current issues, emerging technology and impact on clinical outcome.

    Science.gov (United States)

    Adams, Julia; Cheng, Liang

    2011-09-01

    Lymph node metastasis in patients with prostate cancer indicates a poorer prognosis compared with patients without lymph node metastasis; however, some patients with node-positive disease have long-term survival. Many studies have attempted to discern what characteristics of lymph node metastasis are prognostically significant. These characteristics include nodal tumor volume, number of positive lymph nodes, lymph node density, extranodal extension, lymphovascular invasion and tumor dedifferentiation. Favorable characteristics of regional lymph node involvement included a smaller tumor size and smaller tumor volume. However, the current staging system for prostate cancer does not provide different subclassifications for patients with node-positive prostate cancer. In recent years numerous advanced technologies for the detection of lymph node metastasis have been developed, including molecular imaging techniques and the CellSearch Circulating Tumor Cell System. With the increased detection of patients with prostate cancer, emergence of new technology to identify lymph node metastasis and the number of radical prostatectomies being performed on the rise, subclassifying patients with lymph node-positive disease is imperative. Subclassification would provide a better picture of patient prognosis and allow for a better understanding of targeted therapies to treat patients with lymph node metastasis.

  15. Using online pedagogy to explore student experiences of Science-Technology-Society-Environment (STSE) issues in a secondary science classroom

    Science.gov (United States)

    Ayyavoo, Gabriel Roman

    With the proliferation of 21st century educational technologies, science teaching and learning with digitally acclimatized learners in secondary science education can be realized through an online Science-Technology-Society-Environment (STSE)-based issues approach. STSE-based programs can be interpreted as the exploration of socially-embedded initiatives in science (e.g., use of genetically modified foods) to promote the development of critical cognitive processes and to empower learners with responsible decision-making skills. This dissertation presents a case study examining the online environment of a grade 11 physics class in an all-girls' school, and the outcomes from those online discursive opportunities with STSE materials. The limited in-class discussion opportunities are often perceived as low-quality discussions in traditional classrooms because they originate from an inadequate introduction and facilitation of socially relevant issues in science programs. Hence, this research suggests that the science curriculum should be inclusive of STSE-based issue discussions. This study also examines the nature of students' online discourse and, their perceived benefits and challenges of learning about STSE-based issues through an online environment. Analysis of interviews, offline classroom events and online threaded discussion transcripts draws from the theoretical foundations of critical reflective thinking delineated in the Practical Inquiry (P.I.) Model. The PI model of Cognitive Presence is situated within the Community of Inquiry framework, encompassing two other core elements, Teacher Presence and Social Presence. In studying Cognitive Presence, the online STSE-based discourses were examined according to the four phases of the P.I. Model. The online discussions were measured at macro-levels to reveal patterns in student STSE-based discussions and content analysis of threaded discussions. These analyses indicated that 87% of the students participated in

  16. Detection of and protection against plasma charging damage in modern IC Technology

    NARCIS (Netherlands)

    Wang, Zhichun

    2004-01-01

    In this thesis, the ways to detect and reduce plasma charging damage in the context of back-end-of-line (BEOL) processes have been studied. First a general introduction of the inevitable role of plasma processes as well as the characterization of plasma charging damage in the semiconductor industry

  17. Partnering To Build a Quality Workforce: Critical Issues in Environmental Technology Education at Two-Year Colleges. A Report of the National Forum on Critical Issues in Environmental Technology Education at Two-Year Colleges (Washington, D.C., March 2-4, 1995).

    Science.gov (United States)

    Kabat, Ellen J.; Friedel, Janice Nahra; Senew, Mike

    The National Forum on Critical Issues in Environmental Technology Education at Two-Year Colleges addressed critical issues relevant to environmental technology education in the United States. Forty-three participants from across the country who attended the 1995 Forum represented business and industry, two-year colleges, four-year colleges and…

  18. Special Issue: Software-engineering, Properites of Language and Aspect Technologies

    DEFF Research Database (Denmark)

    Bergmans, Lodewijk; Gybels, Kris; Ernst, Erik

    2008-01-01

    of pointcuts, and the complexity of novel and innovative general-purpose pointcut languages. This paper proposes an interface for user-defined pointcuts, which allows for the definition of new, possibly domain-specific, kinds of pointcuts without extending the language. The second paper, "Developing Law......Dear Readers, SPLAT is a series of workshops held at the AOSD conference; SPLAT stands for "Software engineering Properties of Languages and Aspect Technologies". Software engineering properties, also referred to as quality or non-functional requirements, or 'ilities', describe the various...... characteristics of software beyond mere functionality. Software engineering properties, such as comprehensibility, evolvability, modularity, and analyzability, are crucial dimensions to consider in the assessment of the quality of software engineering activities and products. Generally, designers and users...

  19. Issues in the Use of Information and Communication Technologies and Unethical Behaviors: An Overview

    Directory of Open Access Journals (Sweden)

    Fatma Kübra ÇELEN1,

    2016-12-01

    Full Text Available The purpose of this study is to examine literature on unethical behavior in the use of information and communication technologies (ICT. In reaching this goal a search was conducted. When presenting the results findings of research conducted in abroad and in Turkey are presented respectively in order from the oldest to date. Findings indicated that ICT users have some dilemmas about identified ethical behavior and awareness in ethical behavior. In addition, social norms, gender, age, personal values, moral judgment, social values, moral responsibility has been effective in the ethical and legal use of ICT. On the other hand, it was confirmed that individuals’ opinions about unethical behavior in the use of ICT change according to demographic characteristics like gender, and parents’ education level in researches conducted in Turkey.

  20. Historic Buildings of the Warsaw University of Technology - Selected Issues of Renovation, Modernisation and Adaptation

    Science.gov (United States)

    Wagner, Anna Agata

    2016-06-01

    The historic buildings of the Warsaw University of Technology display not only outstanding architectural values, but are also representative of the trends in preservation, restoration, and adaptation that were prevalent at the time of their modernization. The post-war rebuilding of the WUT was more akin to modernization than reconstruction. But the freedom to shape modern architectural forms in the 1960s and '70s brought with it a lack of respect for their historic environment. A change in the approach to historic buildings and their integration with modern architecture came in the late 1970s. The most recent modernization of the WUT's historic buildings, especially after Poland's accession to the EU, resulted in many good examples of proper, harmonious integration between the `modern' and the `traditional'.

  1. Monitoring Employee Behavior Through the Use of Technology and Issues of Employee Privacy in America

    Directory of Open Access Journals (Sweden)

    Mahmoud Moussa

    2015-04-01

    Full Text Available Despite the historic American love for privacy that has enhanced innovation and creativity throughout the country, encroachments on privacy restrain individual freedom. Noticeable, advances in technology have offered decision makers remarkable monitoring aptitudes that can be used in numerous tasks for multiple reasons. This has led scholars and practitioners to pose a significant number of questions about what is legitimate and illegitimate in the day-to-day affairs of a business. This article is composed of (a research about electronic monitoring and privacy concerns; (b definitions of, critiques of, and alternatives to electronic performance monitoring (EPM; (c motives behind employee monitoring and leadership behaviors; (d advice that makes monitoring less distressful; (e employee monitoring policies; (f reviewing policies and procedures; (g the role of human resource development (HRD in employee assessment and development; and (h conclusion and recommendations for further studies.

  2. Historic Buildings of the Warsaw University of Technology - Selected Issues of Renovation, Modernisation and Adaptation

    Directory of Open Access Journals (Sweden)

    Wagner Anna Agata

    2016-06-01

    Full Text Available The historic buildings of the Warsaw University of Technology display not only outstanding architectural values, but are also representative of the trends in preservation, restoration, and adaptation that were prevalent at the time of their modernization. The post-war rebuilding of the WUT was more akin to modernization than reconstruction. But the freedom to shape modern architectural forms in the 1960s and ’70s brought with it a lack of respect for their historic environment. A change in the approach to historic buildings and their integration with modern architecture came in the late 1970s. The most recent modernization of the WUT’s historic buildings, especially after Poland’s accession to the EU, resulted in many good examples of proper, harmonious integration between the ‘modern’ and the ‘traditional’.

  3. Technology and economic impacts of mega-sports events: A key issue? Exploratory insights from literature

    Directory of Open Access Journals (Sweden)

    Chanaron Jean Jacques

    2014-01-01

    Full Text Available Mega-sport events such as Olympic Games or Football World Cup are always presented as providing the hosting nation and/or city with huge benefits. Supporters of such events quote economic, social and cultural impacts for the region as well as contributions to scientific and technological progress and innovation. obviously, they need to politically justify the impressive and growing financial investment required by organizing Olympic Games or World Cup. The article aims at looking at a quite abundant academic literature with the objectives of defining the various potential impacts and the methods used for their assessment. It concludes that there is no universal and scientifically valid model for evaluating the benefits of mega-sport events and that organizers should be very cautious when arguing in favor of deciding to host such events.

  4. Acceptance of wearable technology by people with Alzheimer's disease: issues and accommodations.

    Science.gov (United States)

    Mahoney, Edward L; Mahoney, Diane F

    2010-09-01

    The increasing number of cognitively impaired older adults who exhibit wandering tendencies raises safety concerns. The purpose of the current study was to research the State-of the-Art in Wearable Technologies for persons with Alzheimer's Disease and identify challenges unique to this population and lessons learned. Inclusion criteria specified systems/devices that completed laboratory testing and were commercially available for usage by community-based Alzheimer's family caregivers. Methods included a series of Internet product searches and telephone interviews with related corporate representatives and participant's referrals. Results indicated many products in development or academic research use but only a limited number were available that met the study criteria. The interviews with key informants revealed features necessary to consider when making products to be worn by persons with cognitive impairment. In conclusion, there is no ideal solution and opportunities remain for marketplace innovations and for addressing the challenges associated with balancing safety and security.

  5. Characterizations of microwave plasma CVD grown polycrystalline diamond coatings for advanced technological applications

    Directory of Open Access Journals (Sweden)

    Awadesh Kumar Mallik

    2014-06-01

    Full Text Available Polycrystalline diamond (PCD coatings ranging from few microns to several hundred microns thickness have been grown by 915 MHz microwave plasma reactor with 9000 W power. The coatings were deposited on 100 mm diameter silicon (Si substrate from few hours to several days of continuous runs. PCD coatings were made freestanding by wet chemical etching technique. The deposited PCDs were evaluated by X-ray diffraction (XRD, scanning electron microscopy (SEM, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS for physical characterization and compared with authors’ earlier work. Refractive index of 2.41 was obtained at 633 nm wavelength and a maximum of 6.6 W·cm-1K-1 value for thermal conductivity could be achieved with the grown coatings. The values are well above the existing non-diamond heat spreading substrates, which makes the grown PCDs as candidates for heat spreaders in different technological applications. High refractive index along with translucent nature of the white freestanding PCDs, make them potential candidate for optical windows.

  6. Biodiesel production using fatty acids from food industry waste using corona discharge plasma technology.

    Science.gov (United States)

    Cubas, A L V; Machado, M M; Pinto, C R S C; Moecke, E H S; Dutra, A R A

    2016-01-01

    This article aims to describe an alternative and innovative methodology to transform waste, frying oil in a potential energy source, the biodiesel. The biodiesel was produced from fatty acids, using a waste product of the food industry as the raw material. The methodology to be described is the corona discharge plasma technology, which offers advantages such as acceleration of the esterification reaction, easy separation of the biodiesel and the elimination of waste generation. The best conditions were found to be an oil/methanol molar ratio of 6:1, ambient temperature (25 °C) and reaction time of 110 min and 30 mL of sample. The acid value indicates the content of free fatty acids in the biodiesel and the value obtained in this study was 0.43 mg KOH/g. Peaks corresponding to octadecadienoic acid methyl ester, octadecanoic acid methyl ester and octadecenoic acid methyl ester, from the biodiesel composition, were identified using GC-MS. A major advantage of this process is that the methyl ester can be obtained in the absence of chemical catalysts and without the formation of the co-product (glycerin). Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. North Korean nuclear issues and the LWR project; analysis of the key technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Byung Koo; Kwack, E. H.; Shin, J. S.; An, J. S.; Lee, J. U.; Kim, H. T.; Kim, J. S.; Yoon, Y. C

    2000-11-01

    Year 2000 will be remembered as an epoch making period between two Koreas. Korean nuclear industries became activated with the KEDO LWR main contracts entering into force in February, 2000. Respective design, manufacturing and construction activities are mobilized in accordance with the total project schedule of about 100 months. What started out as the nuclear power plant design standardization project in the early '80s, is now being implemented as repeat construction of KSNPs at Yonggwang and Ulchin sites as well as at Kumho site in the DPRK. However, the KEDO construction schedule and the past nuclear inconsistency issues are closely linked due to the nonproliferation concerns. In practice, the IAEA must come to the conclusion that the correctness and completeness must be fulfilled before delivery of the first key component for the KEDO LWR unit 1. While the IAEA verification process tends to focus on the nuclear materials accountancy control, longer term objective between two Koreas is bound to take the form of confidence building. It is necessary to analyse the nuclear research and production facilities in order to make proper evaluation of a nation's nuclear capabilities. Close assessment on development status of graphite moderated reactors and their operation history, spent fuel reprocessing facilities, and HEU production capabilities would be essential. In addition, illicit trafficking possibilities should be addressed. Chapter 1 describes the graphite moderated reactors in general; Chapter 2 describes various reprocessing processes and their detection capabilities; Chapter 3 contains possible uranium enrichment processes with their detection capabilities, and Chapter 4 summarizes the international treaties in illicit trafficking control with the IAEA database.

  8. The Ethics of Instructional Technology: Issues and Coping Strategies Experienced by Professional Technologists in Design and Training Situations in Higher Education

    Science.gov (United States)

    Lin, Hong

    2007-01-01

    To correspond to the Association for Educational Communication Technology (AECT) Code of Professional Ethics and the professional journal TechTrends' ethics columns, this paper provides empirical data regarding ethical issues associated with the use of instructional technology in design and training situations. In-depth interviews of 20…

  9. Instructional Technology: Issues and Concerns. Summary Report of the Lake Okoboji Educational Media Leadership Conference (20th Lakeside Laboratory, Lake Okoboji, Milford, Iowa, August 11-16, 1974).

    Science.gov (United States)

    Cochran, Lida M.; And Others

    Participants of the twentieth Lake Okoboji Educational Media Leadership Conference examined various issues in the field of instructional technology, and suggested new directions. This report presents descriptions of general meetings and group studies. Ten subtopics were discussed: (1) humanizing education via instructional technology, (2)…

  10. Touch Interaction with 3D Geographical Visualization on Web: Selected Technological and User Issues

    Science.gov (United States)

    Herman, L.; Stachoň, Z.; Stuchlík, R.; Hladík, J.; Kubíček, P.

    2016-10-01

    The use of both 3D visualization and devices with touch displays is increasing. In this paper, we focused on the Web technologies for 3D visualization of spatial data and its interaction via touch screen gestures. At the first stage, we compared the support of touch interaction in selected JavaScript libraries on different hardware (desktop PCs with touch screens, tablets, and smartphones) and software platforms. Afterward, we realized simple empiric test (within-subject design, 6 participants, 2 simple tasks, LCD touch monitor Acer and digital terrain models as stimuli) focusing on the ability of users to solve simple spatial tasks via touch screens. An in-house testing web tool was developed and used based on JavaScript, PHP, and X3DOM languages and Hammer.js libraries. The correctness of answers, speed of users' performances, used gestures, and a simple gesture metric was recorded and analysed. Preliminary results revealed that the pan gesture is most frequently used by test participants and it is also supported by the majority of 3D libraries. Possible gesture metrics and future developments including the interpersonal differences are discussed in the conclusion.

  11. The issues that class teachers encounter during application of science and technology teaching curriculum

    Directory of Open Access Journals (Sweden)

    Mustafa Ugras

    2014-08-01

    Full Text Available This study aimed at investigating the challenges class teachers face in the curriculum implementation and whether these challenges differ in relation to teachers’ gender, level of education, department they graduated from and teaching experience. For this purpose; a questionnaire was developed by the researcher. Items of the questionnaire were selected from the related literature and validated by a group of expert in the field. A pilot study was conducted to assess the clarity of the questionnaire items. The internal reliability of the final version of questionnaire was calculated by using Cronbach’s Alpha Formula and found be high (α=0.85. The participants of this research included 342 class teachers who were teaching 4th and 5th class in 57 different elementary schools in 2010-2011 academic years in Bingol and Diayrbakir cities. The results of the survey were considered by using SPSS packet program. In the analyzing of data obtained from this study, frequency, arithmetic average, t-test and variance analysis were used. From the obtained data, it was determined that the 4th and 5th class teachers encounter different problems in science and technology teaching program, especially in performance homework, sourcing and lesson time topics.

  12. Integration of microarray technology into prenatal diagnosis: counselling issues generated during the NICHD clinical trial.

    Science.gov (United States)

    Wapner, Ronald J; Driscoll, Deborah A; Simpson, Joe Leigh

    2012-04-01

    Cytogenetic microarray analysis (CMA) in prenatal testing detects chromosome abnormalities and new genetic syndromes that would be missed by conventional cytogenetics and has the potential to significantly enhance prenatal genetic evaluation. A large Eunice Kennedy Shriver National Institute Of Child Health and Human Development (NICHD)-sponsored multicentered trial to assess the role of CMA as a primary prenatal diagnostic tool has been completed, and results will soon be available. Integration of this technology into clinical care will require thoughtful changes in patient counseling. Here, we examine four cases, all ascertained in the NICHD prenatal microarray study, to illustrate the challenges and subtleties of genetic counseling required with prenatal CMA testing. Although the specifics of each case are distinct, the underlying genetic principles of uncertainty, variable expressivity, and lack of precise genotype-phenotype correlation are well known and already part of prenatal counseling. Counselor and practitioner education will need to include both the science of interpreting array findings as well as development of improved approaches to uncertainty. A team approach to interpretation will need to be developed, as will standardized guidelines by professional organizations and laboratories. Of equal import is additional research into patient attitudes and desires, and a better understanding of the full phenotypic spectrum of copy number variants discovered in utero.

  13. Technical issues associated with innovative environmental technology: FTIR computer aided tomography

    Energy Technology Data Exchange (ETDEWEB)

    Todd, L.A. [Univ. of North Carolina, Chapel Hill, NC (United States). Dept. of Environmental Sciences and Engineering

    1995-12-31

    This research reports on a new innovation in chemical measurement technology that combines Open-path Fourier Transform Infrared (OP-FTIR) spectroscopy with computed tomography to create two-dimensional maps of air contaminants that are both spatially and temporally resolved. This method has been evaluated with numerical studies that tested different iterative reconstruction algorithms and OP-FTIR configurations. The success of this system for characterizing the flow of contaminants in air, exposure assessment, emission monitoring and leak detection, was closely linked to the choice of reconstruction algorithm and configuration. A systematic method was developed to evaluate these parameters using static and time series test maps under ideal and non-ideal sampling conditions. Concentration map quality was evaluated using qualitative and quantitative criteria. Map reconstruction quality using different algorithms configurations was found to be intimately related to the complexity of the test maps. The results of this research underscored the need to thoroughly test the system through numerical studies prior to field implementation; a wide variety of concentration maps, relevant to the application, should be tested under both ideal and non-ideal sampling conditions.

  14. Status report on energy recovery from municipal solid waste: technologies, lessons and issues. Information bulletin of the energy task force of the urban consortium

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-01-01

    A review is presented of the lessons learned and issues raised regarding the recovery of energy from solid wastes. The review focuses on technologies and issues significant to currently operating energy recovery systems in the US - waterwall incineration, modular incineration, refuse derived fuels systems, landfill gas recovery systems. Chapters are: Energy Recovery and Solid Waste Disposal; Energy Recovery Systems; Lessons in Energy Recovery; Issues in Energy Recovery. Some basic conclusions are presented concerning the state of the art of energy from waste. Plants in shakedown or under construction, along with technologies in the development stages, are briefly described. Sources of additional information and a bibliography are included. (MCW)

  15. Engaging Students in Modeling as an Epistemic Practice of Science: An Introduction to the Special Issue of the Journal of Science Education and Technology

    Science.gov (United States)

    Campbell, Todd; Oh, Phil Seok

    2015-04-01

    This article provides an introduction for the special issue of the Journal of Science Education and Technology focused on science teaching and learning with models. The article provides initial framing for questions that guided the special issue. Additionally, based on our careful review of each of these articles, some discussion of how selected articles within the issue informed these questions. Specifically, when considering key facets of modeling instruction or design features of modeling curriculum, the studies in the special issue provided insight into productive ways in which teachers engaged students in modeling practices. Further, modeling pedagogies—pedagogies for transforming scientific practices of modeling into students' experience—were reified so that how these pedagogies could be coordinated into classroom instruction was revealed. When characteristic features of students' engagement in modeling were considered, research offered insight into productive model-based learning sequences for K-6 modelers and how students' development of productive epistemologies can evolve differently. Finally, the special issue considered how technology facilitated cognitive processes and/or instructional practices by examining learners' interactions with technology within modeling contexts. In this, instructional sequences using agent-based modeling (ABM) as a central technology are shared. These include the role of ABM in scaling student-modeling experiences beyond individuals to classroom experiences and how ABM can support student investigations of complex phenomenon that is not directly observable, among other affordances. Other articles also investigated some aspects of learners' interactions with technology to inform how technology-enhanced science teaching and learning with models.

  16. Small scale wind power harnessing in Colombian oil industry facilities: Wind resource and technology issues

    Energy Technology Data Exchange (ETDEWEB)

    Giraldo, Mauricio; Nieto, Cesar; Escudero, Ana C.; Cobos, Juan C.; Delgado, Fernando

    2010-07-01

    Full text: Looking to improve its national and international standing, Colombia's national oil company, Ecopetrol, has set its goal on becoming involved on the production of energy from multiple sources, most importantly, on having an important percentage of its installed capacity from renewable sources. Part of this effort entices the evaluation of wind power potential on its facilities, including production, transportation and administrative, as well as identifying those technologies most suitable for the specific conditions of an equatorial country such as Colombia. Due to the lack of adequate site information, the first step consisted in superimposing national data to the facilities map of the company; this allowed for the selection of the first set of potential sites. From this set, the terminal at Covenas-Sucre was selected taking into account not only wind resource, but ease of access and power needs, as well as having a more or less representative wind potential in comparison to the rest of the country. A weather station was then installed to monitor wind variables. Measurements taken showed high variations in wind direction, and relatively low velocity profiles, making most commercially available wind turbines difficult to implement. In light of the above, a series of iterative steps were taken, first considering a range of individual Vertical Axis Wind Turbines (VAWT), given their capacity to adapt to changing wind directions. However, wind speed variations proved to be a challenge for individual VAWT's, i.e. Darriues turbines do not work well with low wind speeds, and Savonius turbines are not efficient of high wind speeds. As a result, a combined Darrieus- Savonius VAWT was selected given the capacity to adapt to both wind regimes, while at the same time modifying the size and shape of the blades in order to adapt to the lower average wind speeds present at the site. The resulting prototype is currently under construction and is scheduled to

  17. 物联网技术及安全问题%Technology and Security Issues of Internet of Things

    Institute of Scientific and Technical Information of China (English)

    朱新良

    2015-01-01

    物联网被称为继计算机和互联网之后的第三次信息技术革命,其应用无处不在,而物联网的安全问题直接关系到它的广泛应用。从物联网的安全构架和特点出发,阐述了物联网三层体系结构中存在的安全问题,提出了解决方案和涉及到的关键技术,对感知层的安全措施进行了具体的阐述,包括密钥管理算法、安全路由协议、数据融合技术以及身份认证和访问控制,等等。最后介绍了物联网的典型应用和发展前景。%Internet of things is called the third IT revolution following the computer and the internet, and now it is everywhere.The security issues of the Internet of Things (IoT)are directly related to the wide application of its system.Beginning with introducing the architecture and features of IoT security,this paper expounds several security issues of IoT that exist in the three-layer system structure,and comes up with solutions coupled with key technologies involved.Among these safety measures concerned,those in perception layer are particularly elaborated,including key management and algorithm,security routing protocol,data fusion technology,as well as authentication and access control,etc.The paper also presents the typical application and future prospect of the internet of things.

  18. Colonization by Staphylococcus aureus of Nano-Structured Fluorinated Surfaces, Formed by Different Methods of Ion-Plasma Technology.

    Science.gov (United States)

    Elinson, V M; Didenko, L V; Shevlyagina, N V; Avtandilov, G A; Gaidarova, A Kh; Lyamin, A N

    2016-11-01

    Colonization of fluorinated surfaces produced by ion-plasma technology by Staphylococcus aureus was studied by scanning electron microscopy and surface energy analysis. It was shown that the intensity of colonization was determined by the surface relief and fluorine content. Formation of nanostructured surfaces accompanied by a sharp decrease in the surface energy prevented adhesion of Staphylococcus aureus cells to the fluorine-containing surface.

  19. Smart homes, private homes? An empirical study of technology researchers' perceptions of ethical issues in developing smart-home health technologies.

    Science.gov (United States)

    Birchley, Giles; Huxtable, Richard; Murtagh, Madeleine; Ter Meulen, Ruud; Flach, Peter; Gooberman-Hill, Rachael

    2017-04-04

    Smart-home technologies, comprising environmental sensors, wearables and video are attracting interest in home healthcare delivery. Development of such technology is usually justified on the basis of the technology's potential to increase the autonomy of people living with long-term conditions. Studies of the ethics of smart-homes raise concerns about privacy, consent, social isolation and equity of access. Few studies have investigated the ethical perspectives of smart-home engineers themselves. By exploring the views of engineering researchers in a large smart-home project, we sought to contribute to dialogue between ethics and the engineering community. Either face-to-face or using Skype, we conducted in-depth qualitative interviews with 20 early- and mid-career smart-home researchers from a multi-centre smart-home project, who were asked to describe their own experience and to reflect more broadly about ethical considerations that relate to smart-home design. With participants' consent, interviews were audio-recorded, transcribed and analysed using a thematic approach. Two overarching themes emerged: in 'Privacy', researchers indicated that they paid close attention to negative consequences of potential unauthorised information sharing in their current work. However, when discussing broader issues in smart-home design beyond the confines of their immediate project, researchers considered physical privacy to a lesser extent, even though physical privacy may manifest in emotive concerns about being watched or monitored. In 'Choice', researchers indicated they often saw provision of choice to end-users as a solution to ethical dilemmas. While researchers indicated that choices of end-users may need to be restricted for technological reasons, ethical standpoints that restrict choice were usually assumed and embedded in design. The tractability of informational privacy may explain the greater attention that is paid to it. However, concerns about physical privacy may

  20. Novel plasma arc reactor with molted metal electrodes for coal gasification technology

    Energy Technology Data Exchange (ETDEWEB)

    Predtechensky, M.R.; Kuropyatnik, I.N.; Tukhto, O.M. [International Scientific Center on Thermophysics and Energetics, Novosibirsk, Russia Institute of Thermophysics SB RAS, Novosibirsk (Russian Federation)

    2001-07-01

    The process of steam gasification of coal has been studied using the new type of plasma chemical reactor with molten metal electrodes. Using of molten metal electrodes allows to increase significantly the continuous operation of the plasma arc reactor and to realize some additional advantages. (authors)

  1. 空气等离子镀覆技术的进展%Development of Air-plasma Spraying Technology

    Institute of Scientific and Technical Information of China (English)

    В.Я.Фролов; Г.К.Петров; Б.А.Юшин; Д.В.Иванов

    2014-01-01

    The air-plasma spraying technology has been found application in many fields .In recent years , research on both establishment of plasma generator and spraying process has been performed in the St .Petersburg State Polytechnic University , and many types of coatings , which may not only be used to protect freshly made parts but also to restore worn parts , have been developed .The theoretical and experimental investigations conducted by the St.Petersburg State Polytechnic University in conjunction with the Leibnits ( INP Greifswald ) Plasma and Technology Research Institute will allow amount of experimental work to be appreciably reduced in developing the plasma generator and the air-plasma spraying process .%空气等离子喷涂工艺在许多领域得到了应用。近年来,国立圣彼得堡综合技术大学在等离子体发生器的创建和涂覆工艺方面进行了研究,业已研制成多种涂层,既可用于新制零件的防护,也可用于磨损件的修复。国立圣彼得堡综合技术大学和雷波尼茨( INP Greifswald )等离子体及工艺研究院联合进行的理论和试验研究,可显著减少研发等离子体发生器和空气等离子涂覆工艺的试验工作量。

  2. Challenge study of the pathogen reduction capacity of the THERAFLEX MB-Plasma technology.

    Science.gov (United States)

    Reichenberg, S; Gravemann, U; Sumian, C; Seltsam, A

    2015-08-01

    Although most pathogen reduction systems for plasma primarily target viruses, bacterial contamination may also occur. This study aimed to investigate the bacterial reduction capacity of a methylene blue (MB) treatment process and its virus inactivation capacity in lipaemic plasma. Bacterial concentrations in plasma units spiked with different bacterial strains were measured before and after the following steps of the THERAFLEX MB-Plasma procedure: leucocyte filtration, MB/light treatment and MB filtration. Virus inactivation was investigated for three virus types in non-lipaemic, borderline lipaemic and highly lipaemic plasma. Leucocyte filtration alone efficiently eliminated most of the tested bacteria by more than 4 logs (Staphylococcus epidermidis and Staphylococcus aureus) or to the limit of detection (LOD) (≥ 4.8 logs; Escherichia coli, Bacillus cereus and Klebsiella pneumoniae). MB/light and MB filtration further reduced Staphylococcus epidermidis and Staphylococcus aureus to below the LOD. The small bacterium Brevundimonas diminuta was reduced by 1.7 logs by leucocyte filtration alone, and to below the LOD by additional MB/light treatment and MB filtration (≥ 3.7 logs). Suid herpesvirus 1, bovine viral diarrhoea virus and human immunodeficiency virus 1 were efficiently inactivated by THERAFLEX MB-Plasma, independent of the degree of lipaemia. THERAFLEX MB-Plasma efficiently reduces bacteria, mainly via the integrated filtration system. Its virus inactivation capacity is sufficient to compensate for reduced light transparency due to lipaemia. © 2015 International Society of Blood Transfusion.

  3. Working Group 5: Measurements technology and active experiments

    Science.gov (United States)

    Whipple, E.; Barfield, J. N.; Faelthammar, C.-G.; Feynman, J.; Quinn, J. N.; Roberts, W.; Stone, N.; Taylor, W. L.

    1986-01-01

    Technology issues identified by working groups 5 are listed. (1) New instruments are needed to upgrade the ability to measure plasma properties in space. (2) Facilities should be developed for conducting a broad range of plasma experiments in space. (3) The ability to predict plasma weather within magnetospheres should be improved and a capability to modify plasma weather developed. (4) Methods of control of plasma spacecraft and spacecraft plasma interference should be upgraded. (5) The space station laboratory facilities should be designed with attention to problems of flexibility to allow for future growth. These issues are discussed.

  4. Removing biofilms from microstructured titanium ex vivo: a novel approach using atmospheric plasma technology.

    Directory of Open Access Journals (Sweden)

    Stefan Rupf

    Full Text Available The removal of biofilms from microstructured titanium used for dental implants is a still unresolved challenge. This experimental study investigated disinfection and removal of in situ formed biofilms from microstructured titanium using cold atmospheric plasma in combination with air/water spray. Titanium discs (roughness (Ra: 1.96 µm were exposed to human oral cavities for 24 and 72 hours (n = 149 each to produce biofilms. Biofilm thickness was determined using confocal laser scanning microscopy (n = 5 each. Plasma treatment of biofilms was carried out ex vivo using a microwave-driven pulsed plasma source working at temperatures from 39 to 43°C. Following plasma treatment, one group was air/water spray treated before re-treatment by second plasma pulses. Vital microorganisms on the titanium surfaces were identified by contact culture (Rodac agar plates. Biofilm presence and bacterial viability were quantified by fluorescence microscopy. Morphology of titanium surfaces and attached biofilms was visualized by scanning electron microscopy (SEM. Total protein amounts of biofilms were colorimetrically quantified. Untreated and air/water treated biofilms served as controls. Cold plasma treatment of native biofilms with a mean thickness of 19 µm (24 h to 91 µm (72 h covering the microstructure of the titanium surface caused inactivation of biofilm bacteria and significant reduction of protein amounts. Total removal of biofilms, however, required additional application of air/water spray, and a second series of plasma treatment. Importantly, the microstructure of the titanium discs was not altered by plasma treatment. The combination of atmospheric plasma and non-abrasive air/water spray is applicable for complete elimination of oral biofilms from microstructured titanium used for dental implants and may enable new routes for the therapy of periimplant disease.

  5. Removing biofilms from microstructured titanium ex vivo: a novel approach using atmospheric plasma technology.

    Science.gov (United States)

    Rupf, Stefan; Idlibi, Ahmad Nour; Marrawi, Fuad Al; Hannig, Matthias; Schubert, Andreas; von Mueller, Lutz; Spitzer, Wolfgang; Holtmann, Henrik; Lehmann, Antje; Rueppell, Andre; Schindler, Axel

    2011-01-01

    The removal of biofilms from microstructured titanium used for dental implants is a still unresolved challenge. This experimental study investigated disinfection and removal of in situ formed biofilms from microstructured titanium using cold atmospheric plasma in combination with air/water spray. Titanium discs (roughness (Ra): 1.96 µm) were exposed to human oral cavities for 24 and 72 hours (n = 149 each) to produce biofilms. Biofilm thickness was determined using confocal laser scanning microscopy (n = 5 each). Plasma treatment of biofilms was carried out ex vivo using a microwave-driven pulsed plasma source working at temperatures from 39 to 43°C. Following plasma treatment, one group was air/water spray treated before re-treatment by second plasma pulses. Vital microorganisms on the titanium surfaces were identified by contact culture (Rodac agar plates). Biofilm presence and bacterial viability were quantified by fluorescence microscopy. Morphology of titanium surfaces and attached biofilms was visualized by scanning electron microscopy (SEM). Total protein amounts of biofilms were colorimetrically quantified. Untreated and air/water treated biofilms served as controls. Cold plasma treatment of native biofilms with a mean thickness of 19 µm (24 h) to 91 µm (72 h) covering the microstructure of the titanium surface caused inactivation of biofilm bacteria and significant reduction of protein amounts. Total removal of biofilms, however, required additional application of air/water spray, and a second series of plasma treatment. Importantly, the microstructure of the titanium discs was not altered by plasma treatment. The combination of atmospheric plasma and non-abrasive air/water spray is applicable for complete elimination of oral biofilms from microstructured titanium used for dental implants and may enable new routes for the therapy of periimplant disease.

  6. Numerical Simulation of Plasma-Dynamical Processes in the Technological Inductively Coupled RF Plasmatron with Gas Cooling

    Directory of Open Access Journals (Sweden)

    Yu. M. Grishin

    2016-01-01

    Full Text Available The electrodeless inductively coupled RF plasmatron (ICP torches became widely used in various fields of engineering, science and technology. Presently, owing to development of new technologies to produce very pure substances, nanopowders, etc., there is a steadily increasing interest in the induction plasma. This generates a need for a broad range of theoretical and experimental studies to optimize the design and technological parameters of different ICP equipment.The paper presents a numerical model to calculate parameters of inductively coupled RF plasmatron with gas-cooling flow. A finite volume method is used for a numerical solution of a system of Maxwell's and heat transfer equations in the application package ANSYS CFX (14.5. The pseudo-steady approach to solving problems is used.A numerical simulation has been computed in the application package ANSYS CFX (14.5 for a specific design option of the technological ICP, which has a three-coils inductor and current amplitude in the range J к = 50-170 A (3 MHz. The pure argon flows in the ICP. The paper discusses how the value of discharge current impacts on the thermodynamic parameters (pressure, temperature and the power energy in discharge zone. It shows that the ICP can generate a plasma stream with a maximum temperature of about 10 kK and an output speed of 10-15 m/s. The work determines a length of the plasma stream with a weight average temperature of more than 4 kK. It has been found that in order to keep the quartz walls in normal thermal state, the discharge current amplitude should not exceed 150 A. The paper shows the features of the velocity field distribution in the channel of the plasma torch, namely, the formation of vortex in the position of the first coil. The results obtained are important for calculating the dynamics of heating and evaporation of quartz particles in the manufacturing processes for plasma processing of quartz concentrate into high-purity quartz and

  7. GLOBALIZATION, INFORMATION AND COMMUNICATION TECHNOLOGIES (ICTs AND OPEN/DISTANCE LEARNING IN NIGERIA: Trends, Issues and Solution

    Directory of Open Access Journals (Sweden)

    Akande Joshua OLUSOLA

    2011-07-01

    Full Text Available The main thrust of this paper is to discuss the development of open and distance education in Nigeria and the major manifestations of the use of information and communication technologies (ICTs in education in open and distance learning. This study further discusses the importance and use of ICTs in open and distance learning in making education accessible to a larger population of students. From that vantage point this paper reviews the phenomenon of ICTs in open and distance learning in developing countries such as Nigeria. The paper identifies a number of issues that impede the effective optimization of ICTs in open and distance learning in developing countries. Prominent among the issues highlighted are poverty, intermittent supply of electricity and language barrier. The paper argues that these problems are to be tackled if the objective of enhancing the potentials of ICTs in open and distance learning in developing countries were to be achieved. On that note the current paper makes some humble suggestions on how to curtail the problems. The study employed descriptive method. An intact class of students that registered for the Bachelor of Education distance learning programme of the Faculty of Education of the Obafemi Awolowo University,Ile-Ife formed the samples used for the study. This was done to collect information on the factors affecting usage of ICT. The result shows that lack of skills rank highest (46.1%, following this is non availability of ICT at home (18.8%, costs (11.3% and non familiarity with ICT (10.6%.

  8. Removing biofilms from microstructured titanium ex vivo: a novel approach using atmospheric plasma technology

    National Research Council Canada - National Science Library

    Rupf, Stefan; Idlibi, Ahmad Nour; Marrawi, Fuad Al; Hannig, Matthias; Schubert, Andreas; von Mueller, Lutz; Spitzer, Wolfgang; Holtmann, Henrik; Lehmann, Antje; Rueppell, Andre; Schindler, Axel

    2011-01-01

    .... This experimental study investigated disinfection and removal of in situ formed biofilms from microstructured titanium using cold atmospheric plasma in combination with air/water spray. Titanium discs (roughness (Ra): 1.96 µm...

  9. Research in space science and technology. [including X-ray astronomy and interplanetary plasma physics

    Science.gov (United States)

    Beckley, L. E.

    1977-01-01

    Progress in various space flight research programs is reported. Emphasis is placed on X-ray astronomy and interplanetary plasma physics. Topics covered include: infrared astronomy, long base line interferometry, geological spectroscopy, space life science experiments, atmospheric physics, and space based materials and structures research. Analysis of galactic and extra-galactic X-ray data from the Small Astronomy Satellite (SAS-3) and HEAO-A and interplanetary plasma data for Mariner 10, Explorers 47 and 50, and Solrad is discussed.

  10. Modification of Ni/SiO2 Catalysts by Means of a Novel Plasma Technology

    Institute of Scientific and Technical Information of China (English)

    LI Yuliang; LIU Gaihuan; SONG Lei; CHU Wei; DAI Xiaoyan; YIN Yongxiang

    2008-01-01

    Atmospheric high frequency cold plasma jet was applied to modify Ni/SiO2 catalysts.The catalysts prepared by two different methods with plasma jet were compared with conventional catalysts.BET,XRD,H2-TPD and high-resolution transmission electron microscopy (HRTEM) were used to characterize these catalysts.The results showed that'the catalyst prepared with plasma jet had higher nickel dispersion,larger specific surface area and smaller nickel particle size,about 5 nanometres.Detailed analyses revealed that improved structure and characteristic of the plasma catalyst were benefited from the large amount of hydrogen atoms in the plasma jet,by which the catalyst reduction can be easily achieved in shorter period of time at lower temperature,thus avoiding sintering and conglomeration of the active particles and the support.The activity of catalysts was investigated in the methane reforming with C02.It is shown that the conversions of CH4 and CO2,the yields of H2 and CO were all significantly increased for the plasma catalysts.

  11. Application of cold plasma technology in fiber-reinforced composite materials

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A study is presented concerning a cold plasma technique for improving the bondability of highstrength high-modulus multi-filament polyethylene fibers to polymer matrices and the fibers impregnation with the objective to fabricate composite materials (CMs). Strong bonding between the matrixes and reinforcing fibers during the production of composites appears in the case if interaction is chemical. The value of the activation energy of the chemical interaction for very high performance polyethylene fiber was estimated. It was 1.14 eV. This allows using the cold plasma technique for producing CMs. In order to understand the effect of cold plasma treatment treated and untreated fibers were used to fabricate CMs. The strong bond between the matrix and plasma-activated fibers affects both the properties and failure mode of composite. The properties and failure modes were compared to those of CMs reinforced with untreated fibers. After plasma treatment the properties of CMs are increased. CMs are broken as a unit whole under tension. The ideas of the activating the fibers by cold plasma treatment above the activation energy of the chemical interaction may be extended over other types of the fibers and matrices to produce new types of fiber-reinforced composite materials with high physicomechanical indices.

  12. IEA Wind Task 23, offshore wind technology and deployment. Subtask 1: Experience with critical deployment issues. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Lemming, J.

    2010-10-15

    The final report for IEA Wind Task 23, Offshore Wind Energy Technology and Deployment, is made up of two separate reports: Subtask 1: Experience with Critical Deployment Issues and Subtask 2: Offshore Code Comparison Collaborative (OC3). The Subtask 1 report included here provides background information and objectives of Task 23. It specifically discusses ecological issues and regulation, electrical system integration and offshore wind, external conditions, and key conclusions for Subtask 1. A comprehensive approach to planning is needed that integrates impacts on ecology, the effects of electrical infrastructure, and the layout of wind farms. Governments, which usually finance ecological research, should disclose results for wide dissemination as they become available. As example the workshop held suggested that documents covering the issues like offshore wind energy legislation, Guidelines for EIAs and SEAs and best practices need to be produced and distributed on a regular basis, as ecological research progresses and experience from the planning and operation of existing wind farms emerges. Research should help strike the balance between optimum regulation and the need to get projects up and running. Such research is needed to increase understanding of offshore wind metrology and its impact on electrical power fluctuations. More work is needed to develop special grid code and standards for offshore. The transient behavior of large cable installations (switching / harmonic/ Behavior and modeling of large HV cable systems) must be better understood. Connection and control systems must be developed for large offshore wind farms. Work is needed to develop the technical architecture of offshore wind grid systems. Public access to measurements (e.g., turbine power output, meteorological masts, buoys) is important, especially for model validation. Determining wake effects is currently the most important challenge in wind engineering. Emphasis should be put into

  13. Survey on the technological development issues for large-scale methanol engine power generation plant; Ogata methanol engine hatsuden plant ni kansuru gijutsu kaihatsu kadai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Based on the result of `Survey on the feasibility of large-scale methanol engine power generation plant` in fiscal 1992, concrete technological development issues were studied for its practical use, and the technological R & D scheme was prepared for large-scale methanol engine power plant featured by low NOx and high efficiency. Technological development issues of this plant were as follows: improvement of thermal efficiency, reduction of NOx emission, improvement of the reliability and durability of ignition and fuel injection systems, and reduction of vibration. As the economical effect of the technological development, the profitability of NOx control measures was compared between this methanol engine and conventional heavy oil diesel engines or gas engines. As a result, this engine was more economical than conventional engines. It was suggested that development of the equipment will be completed in nearly 4 years through every component study, single-cylinder model experiment and real engine test. 21 refs., 43 figs., 19 tabs.

  14. Preparation and high-temperature oxidation behavior of plasma Cr-Ni alloying on Ti6Al4V alloy based on double glow plasma surface metallurgy technology

    Science.gov (United States)

    Wei, Dong-Bo; Zhang, Ping-Ze; Yao, Zheng-Jun; Wei, Xiang-Fei; Zhou, Jin-Tang; Chen, Xiao-Hu

    2016-12-01

    To improve the oxidation resistance of Ti6Al4V alloy, it was coated with a Cr-Ni alloy with 20, 40, 60, and 80 at.% Ni content using the double-glow plasma surface metallurgy technology. The coatings were dense, uniform, and compact, including a complete structure of deposited layer, interdiffusion layer, and sputtering-affected zone. The effect of Ni content on the isothermal oxidation behavior of coating was investigated at 750, 850, and 950 °C. The results show that the oxide scale consisted of NiO and Cr2O3. The morphology and distribution of NiO in oxide scale were affected by oxidation temperature and Ni content. When the Ni content was ≤40 at.%, the oxidation resistance of the Cr-Ni alloy coating was enhanced.

  15. Disaster Mental Health and Positive Psychology-Considering the Context of Natural and Technological Disasters: An Introduction to the Special Issue.

    Science.gov (United States)

    Schulenberg, Stefan E

    2016-12-01

    This article serves as an introduction to the Journal of Clinical Psychology's special issue on disaster mental health and positive psychology. The special issue comprises two sections. The first section presents a series of data-driven articles and research-informed reviews examining meaning and resilience in the context of natural and technological disasters. The second section presents key topics in the area of disaster mental health, with particular relevance for positive psychology and related frameworks. The special issue is intended to bridge the gap between these two areas of applied science, with the audience being experienced clinicians or clinicians in training.

  16. Proceedings of the Fourth Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies

    Science.gov (United States)

    Deeb, Wissam; Giordano, James J.; Rossi, Peter J.; Mogilner, Alon Y.; Gunduz, Aysegul; Judy, Jack W.; Klassen, Bryan T.; Butson, Christopher R.; Van Horne, Craig; Deny, Damiaan; Dougherty, Darin D.; Rowell, David; Gerhardt, Greg A.; Smith, Gwenn S.; Ponce, Francisco A.; Walker, Harrison C.; Bronte-Stewart, Helen M.; Mayberg, Helen S.; Chizeck, Howard J.; Langevin, Jean-Philippe; Volkmann, Jens; Ostrem, Jill L.; Shute, Jonathan B.; Jimenez-Shahed, Joohi; Foote, Kelly D.; Wagle Shukla, Aparna; Rossi, Marvin A.; Oh, Michael; Pourfar, Michael; Rosenberg, Paul B.; Silburn, Peter A.; de Hemptine, Coralie; Starr, Philip A.; Denison, Timothy; Akbar, Umer; Grill, Warren M.; Okun, Michael S.

    2016-01-01

    This paper provides an overview of current progress in the technological advances and the use of deep brain stimulation (DBS) to treat neurological and neuropsychiatric disorders, as presented by participants of the Fourth Annual DBS Think Tank, which was convened in March 2016 in conjunction with the Center for Movement Disorders and Neurorestoration at the University of Florida, Gainesveille FL, USA. The Think Tank discussions first focused on policy and advocacy in DBS research and clinical practice, formation of registries, and issues involving the use of DBS in the treatment of Tourette Syndrome. Next, advances in the use of neuroimaging and electrochemical markers to enhance DBS specificity were addressed. Updates on ongoing use and developments of DBS for the treatment of Parkinson's disease, essential tremor, Alzheimer's disease, depression, post-traumatic stress disorder, obesity, addiction were presented, and progress toward innovation(s) in closed-loop applications were discussed. Each section of these proceedings provides updates and highlights of new information as presented at this year's international Think Tank, with a view toward current and near future advancement of the field. PMID:27920671

  17. Proceedings of the Fourth Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies.

    Science.gov (United States)

    Deeb, Wissam; Giordano, James J; Rossi, Peter J; Mogilner, Alon Y; Gunduz, Aysegul; Judy, Jack W; Klassen, Bryan T; Butson, Christopher R; Van Horne, Craig; Deny, Damiaan; Dougherty, Darin D; Rowell, David; Gerhardt, Greg A; Smith, Gwenn S; Ponce, Francisco A; Walker, Harrison C; Bronte-Stewart, Helen M; Mayberg, Helen S; Chizeck, Howard J; Langevin, Jean-Philippe; Volkmann, Jens; Ostrem, Jill L; Shute, Jonathan B; Jimenez-Shahed, Joohi; Foote, Kelly D; Wagle Shukla, Aparna; Rossi, Marvin A; Oh, Michael; Pourfar, Michael; Rosenberg, Paul B; Silburn, Peter A; de Hemptine, Coralie; Starr, Philip A; Denison, Timothy; Akbar, Umer; Grill, Warren M; Okun, Michael S

    2016-01-01

    This paper provides an overview of current progress in the technological advances and the use of deep brain stimulation (DBS) to treat neurological and neuropsychiatric disorders, as presented by participants of the Fourth Annual DBS Think Tank, which was convened in March 2016 in conjunction with the Center for Movement Disorders and Neurorestoration at the University of Florida, Gainesveille FL, USA. The Think Tank discussions first focused on policy and advocacy in DBS research and clinical practice, formation of registries, and issues involving the use of DBS in the treatment of Tourette Syndrome. Next, advances in the use of neuroimaging and electrochemical markers to enhance DBS specificity were addressed. Updates on ongoing use and developments of DBS for the treatment of Parkinson's disease, essential tremor, Alzheimer's disease, depression, post-traumatic stress disorder, obesity, addiction were presented, and progress toward innovation(s) in closed-loop applications were discussed. Each section of these proceedings provides updates and highlights of new information as presented at this year's international Think Tank, with a view toward current and near future advancement of the field.

  18. Proceedings of the Fourth Annual Deep Brain Stimulation Think Tank - A Review of Emerging Issues and Technologies

    Directory of Open Access Journals (Sweden)

    Wissam Deeb

    2016-11-01

    Full Text Available This paper provides an overview of current progress in the technological advances and the use of deep brain stimulation (DBS to treat neurological and neuropsychiatric disorders, as presented by participants of the Fourth Annual Deep Brain Stimulation Think Tank, which was convened in March 2016 in conjunction with the Center for Movement Disorders and Neurorestoration at the University of Florida, Gainesveille FL, USA. The Think Tank discussions first focused on policy and advocacy in DBS research and clinical practice, formation of registries, and issues involving the use of DBS in the treatment of Tourette Syndrome. Next, advances in the use of neuroimaging and electrochemical markers to enhance DBS specificity were addressed. Updates on ongoing use and developments of DBS for the treatment of Parkinson’s disease, essential tremor, Alzheimer’s disease, depression, post-traumatic stress disorder, obesity, addiction were presented, and progress toward innovation(s in closed-loop applications were discussed. Each section of these proceedings provides updates and highlights of new information as presented at this year’s international Think Tank, with a view toward current and near future advancement of the field.

  19. Report on the joint meeting of the Division of Development and Technology Plasma/Wall Interaction and High Heat Flux Materials and Components Task Groups

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, K.L. (ed.)

    1985-10-01

    This report of the Joint Meeting of the Division of Development and Technology Plasma/Wall Interaction and High Heat Flux Materials and Components Task Groups contains contributing papers in the following areas: Plasma/Materials Interaction Program and Technical Assessment, High Heat Flux Materials and Components Program and Technical Assessment, Pumped Limiters, Ignition Devices, Program Planning Activities, Compact High Power Density Reactor Requirements, Steady State Tokamaks, and Tritium Plasma Experiments. All these areas involve the consideration of High Heat Flux on Materials and the Interaction of the Plasma with the First Wall. Many of the Test Facilities are described as well. (LSP)

  20. Plasma technology for creation of protective and decorative coatings for building materials

    Science.gov (United States)

    Volokitin, Oleg; Volokitin, Gennady; Skripnikova, Nelli; Shekhovtsov, Valentin

    2016-01-01

    An experimental setup is developed to create a protective and decorative coating on the surface of building materials. Experimental study is conducted to create a protective coating using low-temperature plasma. The properties of the surface before and after the plasma treatment are investigated. At the increase of the plasma generator power (56-75 kW) the rate of the vitreous coating formation is significantly reduced, and the destruction of hydrous calcium silicates occurs at a lower depth (0.5-2.0 mm). In this case, the adhesive strength increases up to 2.34 MPa. At the increase of the exposure time at 56 kW (0.045 m/s melting rate) plasma generation power, the melt formation is observed not only at the surface but at depth of 0.7 mm and deeper. Also, a deep degradation of the material occurs and the adhesive strength decreases. The optimal heat flux density of plasma generator was established at 1.8-2.6 . 106 W/m2, which allows the achievement of the uniform layer formation on the wood surface that preserves its natural pattern visible.

  1. Non-thermal plasma technology for the development of antimicrobial surfaces: a review

    Science.gov (United States)

    Nikiforov, Anton; Deng, Xiaolong; Xiong, Qing; Cvelbar, U.; DeGeyter, N.; Morent, R.; Leys, Christophe

    2016-05-01

    Antimicrobial coatings are in high demand in many fields including the biomaterials and healthcare sectors. Within recent progress in nanoscience and engineering at the nanoscale, preparation of nanocomposite films containing metal nanoparticles (such as silver nanoparticles, copper nanoparticles, zinc oxide nanoparticles) is becoming an important step in manufacturing biomaterials with high antimicrobial activity. Controlled release of antibiotic agents and eliminating free nanoparticles are of equal importance for engineering antimicrobial nanocomposite materials. Compared to traditional chemical ‘wet’ methods, plasma deposition and plasma polymerization are promising approaches for the fabrication of nanocomposite films with the advantages of gas phase dry processes, effective use of chemicals and applicability to various substrates. In this article, we present a short overview of state-of-the-art engineering of antimicrobial materials based on the use of non-thermal plasmas at low and atmospheric pressure.

  2. A Xenon dielectric barrier discharge lamp (172nm) with a fast-pulse voltage driver: Influence of the voltage waveform on plasma kinetic issues and light output.

    Science.gov (United States)

    Carman, Robert; Ward, Barry; Mildren, Richard; Kane, Deborah

    2003-10-01

    An important class of vacuum-ultraviolet (VUV) excimer lamps based on high pressure rare-gas and rare-gas halogen mixtures utilize the dielectric barrier discharge (DBD) to generate a transient, non-equilibrium plasma that yields high electrical to VUV conversion efficiency. Recent interest has focussed on the use of pulsed voltage excitation techniques (rather than conventional AC sinusoidal waveforms) to alter the physical appearance of the DBD "micro-discharges" from filamentary (AC) to semi-diffuse, conical or homogeneous (pulsed), whilst at the same time dramatically improving the lamp performance and VUV efficiency^1,2. We report results from a combined experimental/computer modelling study of a short-pulse excited co-axial DBD Xe lamp to investigate the influence of the pulsed voltage waveform on the discharge structure, lamp performance, VUV output, and electrical efficiency. The underlying plasma kinetics issues relating to lamp performance, including parasitic collisional processes that act to quench key xenon species population densities, are examined in detail. ^1 Vollkommer F and Hitzschke, US patent 5604410 (1997) ^2 R.P.Mildren and R.J.Carman, J.Phys.D, 34, L1-L6 (2001)

  3. Application of orthogonal design in the experiment of plasma arc powder surfacing technology

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In this paper, the influence of plasma arc powder surfacing technical parameters on the property of layer is defined using the orthogonal design. By the orthogonal polynomial regression, when plasma arc powder surfacing is used on the surface of the X65 steel plate with the Fe-07 alloy powder, the optimum technical parameters are the following: I=180190 A, G=41.5 g/min, v=102 mm/min, T0=350℃, Ql=280 L/h, Qs=400 L/h. Further, analysis of the cracking test data showed that the cracking preheat temperature is 350℃.

  4. Education Offered Via Telecommunications: Trends, Issues, and State-Level Problems in Instructional Technology for Colleges and Universities. Report 87-49.

    Science.gov (United States)

    California State Postsecondary Education Commission, Sacramento.

    Issues concerning telecommunications courses offered by California universities and colleges are reviewed with a focus on the progress made over the past 6 years regarding the lack of incentives for faculty to use instructional technology in their teaching, lack of coordination among interested institutions and agencies, and high initial costs for…

  5. Report on Disclosure Issues Related to the Use of Copy Control and Digital Rights Management Technologies. OECD Digital Economy Papers, No. 115

    Science.gov (United States)

    OECD Publishing (NJ1), 2006

    2006-01-01

    This report analyses the disclosure issues raised by technically-imposed restrictions on the use of digital content. It focuses on the application of copy control and digital rights management technologies in three areas: copy-protected CDs; online music, and DVD regional coding. In each of these areas, the report examines the kinds of…

  6. Epistemological and Methodological Issues for the Conceptualization, Development, and Assessment of ICT-TPCK: Advances in Technological Pedagogical Content Knowledge (TPCK)

    Science.gov (United States)

    Angeli, Charoula; Valanides, Nicos

    2009-01-01

    In this paper, several issues regarding the epistemology of technological pedagogical content knowledge (TPCK) are first raised for the purpose of clarifying the construct. Specifically, the transformative and integrative views are juxtaposed for exploring the epistemology of TPCK, and, at the end, the transformative view is adopted concluding…

  7. Trends and Issues in Technology Education Research in Taiwan: A Co-Word Analysis of 1994-2013 Graduate Theses

    Science.gov (United States)

    Lee, Lung-Sheng; Fang, Yu-Shen

    2015-01-01

    In Taiwan, the Technology Education for 1-12 graders is comprised of two courses--Living Technology (LT) and Information Technology (IT). With its ever-changing feature, Technology Education needs on-going research to support its decisions and actions. The education-related academic programs in universities regularly concern about the development…

  8. The Development of Plasma Thrusters and Its Importance for Space Technology and Science Education at University of Brasilia

    Science.gov (United States)

    Ferreira, Jose Leonardo; Calvoso, Lui; Gessini, Paolo; Ferreira, Ivan

    Since 2004 The Plasma Physics Laboratory of University of Brasilia (Brazil) is developing Hall Plasma Thurusters for Satellite station keeping and orbit control. The project is supported by CNPq, CAPES, FAP DF and from The Brazillian Space Agency-AEB. The project is part of The UNIESPAÇO Program for Space Activities Development in Brazillian Universities. In this work we are going to present the highlights of this project together with its vital contribution to include University of Brasilia in the Brazillian Space Program. Electric propulsion has already shown, over the years, its great advantages in being used as main and secondary thruster system of several space mission types. Between the many thruster concepts, one that has more tradition in flying real spacecraft is the Hall Effect Thruster (HET). These thrusters, first developed by the USSR in the 1960s, uses, in the traditional design, the radial magnetic field and axial electric field to trap electrons, ionize the gas and accelerate the plasma to therefore generate thrust. In contrast to the usual solution of using electromagnets to generate the magnetic field, the research group of the Plasma Physics Laboratory of University of Brasília has been working to develop new models of HETs that uses combined permanent magnets to generate the necessary magnetic field, with the main objective of saving electric power in the final system design. Since the beginning of this research line it was developed and implemented two prototypes of the Permanent Magnet Hall Thruster (PMHT). The first prototype, called P-HALL1, was successfully tested with the using of many diagnostics instruments, including, RF probe, Langmuir probe, Ion collector and Ion energy analyzer. The second prototype, P-HALL2, is currently under testing, and it’s planned the increasing of the plasma diagnostics and technology analysis, with the inclusion of a thrust balance, mass spectroscopy and Doppler broadening. We are also developing an

  9. EDITORIAL: Plasma jets and plasma bullets Plasma jets and plasma bullets

    Science.gov (United States)

    Kong, M. G.; Ganguly, B. N.; Hicks, R. F.

    2012-06-01

    -mentioned early studies has witnessed a considerable and exciting growth in terms of new phenomena observed, new physics and chemistry uncovered, new plasma jet sources conceived, and new applications developed. Examples include the observations of plasma bullets on a nanosecond scale [16], the similarity of plasma bullets to streamers [17], arrays of plasma jets as metamaterials [18], and a rapid increase of applications in biomedicine [19]. However the considerable growth in the research of plasma jets has not been adequately supported, so far, by a sound fundamental underpinning, partly resulting from a somewhat underdevelopment of effective diagnostics and modelling tools. Recognizing the critical importance of basic science for future growth of low-temperature plasma jet technology, this special issue on plasma jets and bullets aims to address some of the most important fundamental questions. Many of the special issue papers continue the established line of investigation to characterize the formation of plasma bullets, using typically ultrafast imaging, electrical detection including electric field and plasma conductivity measurement, and optical emission spectrometry [20]-[26]. These offer strong experimental evidence for the well-known hypothesis that a plasma jet is a form of streamer, and that the ionization wave plays a critical role in their formation. The interaction of two parallel plasma jets [27] and manipulation of plasma jet characteristics [28, 29] are also reported using a similar combination of experimental techniques. Some of the common characteristics of plasma jets are summarized in a review paper in this special issue [30]. A somewhat different line of investigation is employed in a detailed experimental characterization of deterministic chaos in atmospheric plasma jets [31], one of the few non-bullet modes of plasma jets. Although chaos in ionized gases have been observed in other types of discharge plasmas, their applications have not so far been linked

  10. Application of electron beam equipment based on a plasma cathode gun in additive technology

    Science.gov (United States)

    Galchenko, N. K.; Kolesnikova, K. A.; Semenov, G. V.; Rau, A. G.; Raskoshniy, S. Y.; Bezzubko, A. V.; Dampilon, B. V.; Sorokova, S. N.

    2016-11-01

    The paper discusses the application of electron beam equipment based on a plasma cathode gun for three-dimensional surface modification of metals and alloys. The effect of substrate surface preparation on the adhesion strength of gas thermal coatings has been investigated.

  11. Plasma physics and engineering

    CERN Document Server

    Fridman, Alexander

    2011-01-01

    Part I: Fundamentals of Plasma Physics and Plasma ChemistryPlasma in Nature, in the Laboratory, and in IndustryOccurrence of Plasma: Natural and Man MadeGas DischargesPlasma Applications, Plasmas in IndustryPlasma Applications for Environmental ControlPlasma Applications in Energy ConversionPlasma Application for Material ProcessingBreakthrough Plasma Applications in Modern TechnologyElementary Processes of Charged Species in PlasmaElementary Charged Particles in Plasma and Their Elastic and Inelastic CollisionsIonization ProcessesMechanisms of Electron Losses: The Electron-Ion RecombinationEl

  12. Impact of human genome initiative-derived technology on genetic testing, screening and counseling: Cultural, ethical and legal issues

    Energy Technology Data Exchange (ETDEWEB)

    Trottier, R.W.; Hodgin, F.C.; Imara, M.; Phoenix, D.; Lybrook, S. (Morehouse Coll., Atlanta, GA (United States). School of Medicine); Crandall, L.A.; Moseley, R.E.; Armotrading, D. (Florida Univ., Gainesville, FL (United States). Coll. of Medicine)

    1993-01-01

    Genetic medical services provided by the Georgia Division of Public Health in two northern and two central districts are compared to services provided in a district in which a tertiary care facility is located. Genetics outreach public health nurses play key roles in Georgia's system of Children's Health Services Genetics Program, including significant roles as counselors and information sources on special needs social services and support organizations. Unique features of individual health districts, (e.g., the changing face of some rural communities in ethnocultural diversity and socioeconomic character), present new challenges to current and future genetics services delivery. Preparedness as to educational needs of both health professionals and the lay population is of foremost concern in light of the ever expanding knowledge and technology in medical genetics. Perspectives on genetics and an overview of services offered by a local private sector counselor are included for comparison to state supported services. The nature of the interactions which transpire between private and public genetic services resources in Georgia will be described. A special focus of this research includes issues associated with sickle cell disease newborn screening service delivery process in Georgia, with particular attention paid to patient follow-up and transition to primary care. Of particular interest to this focus is the problem of loss to follow-up in the current system. Critical factors in education and counseling of sickle cell patients and the expectations of expanding roles of primary care physicians are discussed. The Florida approach to the delivery of genetic services contrasts to the Georgia model by placing more emphasis on a consultant-specialist team approach.

  13. Physico-mechanical and physico-chemical properties of synthesized cement based on plasma- and wet technologies

    Science.gov (United States)

    Sazonova, Natalya; Skripnikova, Nelli

    2016-01-01

    In this work we studied the influence of plasma-chemical technology of cement clinker synthesis under conditions of high-concentrated heat streams on the properties of cement on fixing such factors as raw-material type (chemical and mineralogical composition), fraction composition, homogenization and module characters of the raw-material mixture. In this connection the sludge of the cement plant in town Angarsk, based on which the cement clinker synthesis using the wet- and plasma-chemical technologies was performed, was used in the studies. The results of chemical X-ray-phase analysis, petrography of cement clinkers, differential scanning colorimetry of hardened cement paste are represented in this work. The analysis of building-technical properties of inorganic viscous substances was performed. It was found that in using the identical raw-material mixture the cement produced with temperature higher by 1650 °C than the traditional one may indicate the higher activity. The hardened cement paste compressive strength at the age of 28 days was higher than the strength of the reference samples by 40.8-41.4 %.

  14. Plasma Assisted Chemical Vapour Deposition – Technological Design Of Functional Coatings

    Directory of Open Access Journals (Sweden)

    Januś M.

    2015-06-01

    Full Text Available Plasma Assisted Chemical Vapour Deposition (PA CVD method allows to deposit of homogeneous, well-adhesive coatings at lower temperature on different substrates. Plasmochemical treatment significantly impacts on physicochemical parameters of modified surfaces. In this study we present the overview of the possibilities of plasma processes for the deposition of diamond-like carbon coatings doped Si and/or N atoms on the Ti Grade2, aluminum-zinc alloy and polyetherketone substrate. Depending on the type of modified substrate had improved the corrosion properties including biocompatibility of titanium surface, increase of surface hardness with deposition of good adhesion and fine-grained coatings (in the case of Al-Zn alloy and improving of the wear resistance (in the case of PEEK substrate.

  15. Improved microwave shielding behavior of carbon nanotube-coated PET fabric using plasma technology

    Energy Technology Data Exchange (ETDEWEB)

    Haji, Aminoddin, E-mail: Ahaji@iaubir.ac.ir [Department of Textile Engineering, Birjand Branch, Islamic Azad University, Birjand (Iran, Islamic Republic of); Semnani Rahbar, Ruhollah [Department of Textile and Leather, Faculty of Chemistry and Petrochemical Engineering, Standard Research Institute, Karaj (Iran, Islamic Republic of); Mousavi Shoushtari, Ahmad [Textile Engineering Department, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of)

    2014-08-30

    Four different procedures were conducted to load amine functionalized multiwall carbon nanotube (NH{sub 2}-MWCNT) onto poly (ethylene terephthalate) (PET) fabric surface to obtain a microwave shielding sample. Plasma treated fabric which was subsequently coated with NH{sub 2}-MWCNT in the presence of acrylic acid was chosen as the best sample. Surface changes in the PET fabrics were investigated by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Wide-angle X-ray diffraction was used to study the crystalline structure of the PET fabric. The microwave shielding performance of the PET fabrics in term of reflection loss was determined using a network analyzer at X-band (8.2–12.4 GHz). The XPS results revealed that the carbon atomic percentage decreased while the oxygen atomic percentage increased when the fabric was plasma treated and coated with NH{sub 2}-MWCNT. The SEM images showed that the NH{sub 2}-MWCNTs were homogenously dispersed and individually separated in the surface of fabric. Moreover, the structural studies showed that the crystalline region of the fabrics was not affected by NH{sub 2}-MWCNT and plasma treatment. The best microwave absorbing properties were obtained from the plasma treated fabric which was then coated with 10% NH{sub 2}-MWCNT in the presence of acrylic acid. It showed a minimum reflection loss of ∼−18.2 dB about 11 GHz. Proper attachments of NH{sub 2}-MWCNT on the PET fabric surface was explained in the suggested mechanism in which hydrogen bonding and amide linkage are responsible for the achievement of microwave shielding properties with high durability.

  16. Improved microwave shielding behavior of carbon nanotube-coated PET fabric using plasma technology

    Science.gov (United States)

    Haji, Aminoddin; Semnani Rahbar, Ruhollah; Mousavi Shoushtari, Ahmad

    2014-08-01

    Four different procedures were conducted to load amine functionalized multiwall carbon nanotube (NH2-MWCNT) onto poly (ethylene terephthalate) (PET) fabric surface to obtain a microwave shielding sample. Plasma treated fabric which was subsequently coated with NH2-MWCNT in the presence of acrylic acid was chosen as the best sample. Surface changes in the PET fabrics were investigated by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Wide-angle X-ray diffraction was used to study the crystalline structure of the PET fabric. The microwave shielding performance of the PET fabrics in term of reflection loss was determined using a network analyzer at X-band (8.2-12.4 GHz). The XPS results revealed that the carbon atomic percentage decreased while the oxygen atomic percentage increased when the fabric was plasma treated and coated with NH2-MWCNT. The SEM images showed that the NH2-MWCNTs were homogenously dispersed and individually separated in the surface of fabric. Moreover, the structural studies showed that the crystalline region of the fabrics was not affected by NH2-MWCNT and plasma treatment. The best microwave absorbing properties were obtained from the plasma treated fabric which was then coated with 10% NH2-MWCNT in the presence of acrylic acid. It showed a minimum reflection loss of ∼-18.2 dB about 11 GHz. Proper attachments of NH2-MWCNT on the PET fabric surface was explained in the suggested mechanism in which hydrogen bonding and amide linkage are responsible for the achievement of microwave shielding properties with high durability.

  17. A computationally assisted spectroscopic technique to measure secondary electron emission coefficients in technological rf plasmas

    Science.gov (United States)

    Berger, Birk; Schulze, Julian; Daksha, Manaswi; Schuengel, Edmund; Koepke, Mark; Korolov, Ihor; Derzsi, Aranka; Donko, Zoltan

    2016-09-01

    A Computationally Assisted Spectroscopic Technique to measure secondary electron emission coefficients (y-CAST) in capacitive rf plasmas is proposed. This non-intrusive, sensitive diagnostic is based on a combination of Phase Resolved Optical Emission Spectroscopy and PIC simulations. Under most conditions in electropositive plasmas the spatio-temporally resolved electron-impact excitation rate features two distinct maxima adjacent to each electrode at different times within one rf period. One maximum is the consequence of an energy gain of the electrons due to sheath expansion. The second maximum is produced by electrons accelerated towards the plasma bulk by the sheath electric field at the time of maximum voltage drop across the sheath. Due to the different excitation mechanisms the ratio of the intensities of these maxima is very sensitive to y, which allows for its determination via comparing the experimentally measured excitation profiles with corresponding simulation data obtained with various y-coefficients. This diagnostic is tested here in a geometrically symmetric reactor, for stainless steel electrodes and argon gas. An effective secondary electron emission coefficient of y = 0.067+-0.010 is obtained, which is in excellent agreement with previous experimental results.

  18. Pyrolysis of Polyolefins Using Rotating Arc Plasma Technology for Production of Acetylene

    Directory of Open Access Journals (Sweden)

    Ming Zhang

    2017-04-01

    Full Text Available Polyolefin, as one of the most widely used macromolecule materials, has been one of the most serious threats to the environment. Current treatment methods of waste polyolefin including landfill, incineration, and thermal degradation have suffered from severe problems such as secondary pollution and the generation of other toxic substances. In this article, we report for the first time a high-efficiency method to produce high-value C2H2 from polyolefins using a rotating direct current arc plasma reactor, using polyethylene and polypropylene as feedstocks. The essence of this method is that a reductive atmosphere of pyrolysis enables a thermodynamic preference to C2H2 over other carbon-containing gas and the rotating direct current arc plasma reactor allows for a uniform distribution of high temperature to ensure high conversion of polymers. Thermodynamic simulation of product composition was performed, and the effect of plasma input power, polyolefin feed rate, and working gas flow rate on the pyrolysis results was experimentally investigated. It was found that, with proper parameter control, approximately complete conversion of carbon in polyolefin could be obtained, with a C2H2 selectivity higher than 80% and a C2H2 yield higher than 70%. These results not only create new opportunities for the reuse of polymer waste, but are also instructive for the green production of C2H2.

  19. Removal of cyanide from water by means of plasma discharge technology.

    Science.gov (United States)

    Hijosa-Valsero, María; Molina, Ricardo; Schikora, Hendrik; Müller, Michael; Bayona, Josep M

    2013-03-15

    Two different nonthermal plasma reactors at atmospheric pressure were assessed for the first time for cyanide removal (1 mg L(-1)) from aqueous solutions (0.025 M NaHCO(3)/NaOH buffer, pH 11) at laboratory scale. Both devices were dielectric barrier discharge (DBD) reactors; one of them was a conventional batch reactor (R1) and the other one was a coaxial thin falling water film reactor (R2). A first-order degradation kinetics was proposed for both experiments, obtaining k(R1) = 0.5553 min(-1) and k(R2) = 0.7482 min(-1). The coaxial reactor R2 yielded a removal of 99% within only 3 min. Energy efficiencies (G) were calculated, yielding 1.74 mg kW(-1) h(-1) for R1 and 127.9 mg kW(-1) h(-1) for R2. When the treatment was applied to industrial wastewaters, cyanide elimination was confirmed, although at a lower rate (above 92% removal in 90 min with R2). Therefore, plasma reactors could be a relevant alternative to established advanced oxidation techniques (UV, H(2)O(2), ozonation, etc.) for the removal of cyanide from wastewaters with low organic loads or even drinking waters.

  20. Inactivation of Salmonella enterica serovar Typhimurium on fresh produce by cold atmospheric gas plasma technology.

    Science.gov (United States)

    Fernández, A; Noriega, E; Thompson, A

    2013-02-01

    Cold atmospheric gas plasma treatment (CAP) is an alternative approach for the decontamination of fresh and minimally processed food. In this study, the effects of growth phase, growth temperature and chemical treatment regime on the inactivation of Salmonella enterica serovar Typhimurium (S. Typhimurium) by Nitrogen CAP were examined. Furthermore, the efficacy of CAP treatment for decontaminating lettuce and strawberry surfaces and potato tissue inoculated with S. Typhimurium was evaluated. It was found that the rate of inactivation of S. Typhimurium was independent of the growth phase, growth temperature and chemical treatment regime. Under optimal conditions, a 2 min treatment resulted in a 2.71 log-reduction of S. Typhimurium viability on membrane filters whereas a 15 min treatment was necessary to achieve 2.72, 1.76 and 0.94 log-reductions of viability on lettuce, strawberry and potato, respectively. We suggest that the differing efficiency of CAP treatment on the inactivation of S. Typhimurium on these different types of fresh foods is a consequence of their surface features. Scanning electron microscopy of the surface structures of contaminated samples of lettuce, strawberry and potato revealed topographical features whereby S. Typhimurium cells could be protected from the active species generated by plasma. Copyright © 2012 Elsevier Ltd. All rights reserved.

  1. Highly efficient shrinkage of inverted-pyramid silicon nanopores by plasma-enhanced chemical vapor deposition technology

    Science.gov (United States)

    Wang, Yifan; Deng, Tao; Chen, Qi; Liang, Feng; Liu, Zewen

    2016-06-01

    Solid-state nanopore-based analysis systems are currently one of the most attractive and promising platforms in sensing fields. This work presents a highly efficient method to shrink inverted-pyramid silicon nanopores using plasma-enhanced chemical vapor deposition (PECVD) technology by the deposition of SiN x onto the surface of the nanopore. The contraction of the inverted-pyramid silicon nanopores when subjected to the PECVD process has been modeled and carefully analyzed, and the modeling data are in good agreement with the experimental results within a specific PECVD shrinkage period (˜0-600 s). Silicon nanopores within a 50-400 nm size range contract to sub-10 nm dimensions. Additionally, the inner structure of the nanopores after the PECVD process has been analyzed by focused ion beam cutting process. The results show an inner structure morphology change from inverted-pyramid to hourglass, which may enhance the spatial resolution of sensing devices.

  2. Highly efficient shrinkage of inverted-pyramid silicon nanopores by plasma-enhanced chemical vapor deposition technology.

    Science.gov (United States)

    Wang, Yifan; Deng, Tao; Chen, Qi; Liang, Feng; Liu, Zewen

    2016-06-24

    Solid-state nanopore-based analysis systems are currently one of the most attractive and promising platforms in sensing fields. This work presents a highly efficient method to shrink inverted-pyramid silicon nanopores using plasma-enhanced chemical vapor deposition (PECVD) technology by the deposition of SiN x onto the surface of the nanopore. The contraction of the inverted-pyramid silicon nanopores when subjected to the PECVD process has been modeled and carefully analyzed, and the modeling data are in good agreement with the experimental results within a specific PECVD shrinkage period (∼0-600 s). Silicon nanopores within a 50-400 nm size range contract to sub-10 nm dimensions. Additionally, the inner structure of the nanopores after the PECVD process has been analyzed by focused ion beam cutting process. The results show an inner structure morphology change from inverted-pyramid to hourglass, which may enhance the spatial resolution of sensing devices.

  3. Antibody-integrated and functionalized graphite-encapsulated magnetic beads, produced using ammonia gas plasma technology, for capturing Salmonella.

    Science.gov (United States)

    Sakudo, Akikazu; Chou, Han; Nagatsu, Masaaki

    2015-03-01

    Salmonella spp. is the single and most important causative agent of foodborne infections, especially involving foods such as eggs, milk and meat. To prevent infection, a reliable surveillance system is required that can quickly and sensitively detect Salmonella. Here, we describe the development of antibody-integrated magnetic beads that are functionalized by a novel strategy using ammonia gas plasma. Ammonia plasma, produced by a radio frequency (RF) power supply, was allowed to react with the surface of graphite-encapsulated magnetic beads, resulting in the introduction of amino groups. An anti-Salmonella antibody was then anchored by sulfide groups present on the protein surface to the amino groups of the magnetic beads via N-succinimidyl 3-(2-pyridyldithio) propionate (SPDP). The potential usefulness of these magnetic beads for capturing Salmonella was examined as follows. The beads were incubated with Salmonella in liquid medium and then separated from the supernatant by applying a magnetic field. After thorough washing, adsorption of Salmonella to the beads was confirmed by immunochromatography, polymerase chain reaction and a direct culture assay. Our findings indicate that the capture and concentration of Salmonella using the antibody-integrated magnetic beads was more efficient than commercial Dynabeads® anti-Salmonella, which are conventionally used for concentrating Salmonella from liquid cultures. We believe this novel bead technology will contribute to the enhanced detection of Salmonella. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. An Examination of Information Technology and Its Perceived Quality Issues in Single System Hospitals in the United States

    Science.gov (United States)

    Byrd, Linda W.

    2009-01-01

    The safety and quality of healthcare is of great concern in the United States. The positive effects of information technology reported in past research, especially case studies, has encouraged expectations that information technology may increase the quality of healthcare while reducing costs of healthcare. The goals of this study was to examine…

  5. Plasma facilities measuring equipment and high-voltage systems for basic research and technology

    Energy Technology Data Exchange (ETDEWEB)

    Sadowski, M.; Pawlowicz, W. [eds.] [Soltan Inst. for Nuclear Studies, Otwock-Swierk (Poland)

    1994-12-31

    The report presents short description and the main technical data of various devices and systems designed and constructed at the Thermonuclear Research Dept. of the Soltan Institute for Nuclear Studies (SINS) in Swierk n. Warsaw, Poland. Different Plasma-Focus (PF) facilities of energy ranging from several kJ to 360 kJ, as well as the Ion Implosion Facilities of energy equal to 400 kJ, are shortly described. We present different cameras and analyzers used for studies of ions and X-rays. We also describe e.g. IONOTRONs used for material engineering. High-Voltage Pulse Generators developed for the voltage range from 40 kV to 2.4 MV, various Data Acquisition Systems, and special Vacuum Stands. Some selected technical units used in high-voltage systems are also presented. (author). 32 figs.

  6. Nano-Disperse Borides and Carbides: Plasma Technology Production, Specific Properties, Economic Evaluation

    Science.gov (United States)

    Galevskii, G. V.; Rudneva, V. V.; Galevskii, S. G.; Tomas, K. I.; Zubkov, M. S.

    2016-04-01

    The experience of production and study on properties of nano-disperse chromium and titanium borides and carbides, and silicon carbide has been generalized. The structure and special service aspects of utilized plasma-metallurgical complex equipped with a three-jet direct-flow reactor with a capacity of 150 kW have been outlined. Processing, heat engineering and service life characteristics of the reactor are specified. The synthesis parameters of borides and carbides, as well as their basic characteristics in nano-disperse condition and their production flow diagram are outlined. Engineering and economic performance of synthesizing borides in laboratory and industrial conditions is assessed, and the respective segment of the international market as well. The work is performed at State Siberian Industrial University as a project part of the State Order of Ministry of Science and Education of the Russian Federation No. 11.1531/2014/K.

  7. Safety and efficient ex vivo expansion of stem cells using platelet-rich plasma technology.

    Science.gov (United States)

    Anitua, Eduardo; Prado, Roberto; Orive, Gorka

    2013-09-01

    The goal of this Review is to provide an overview of the cell culture media supplements used in the ex vivo expansion of stem cells intended for cell therapy. Currently, the gold standard is the culture supplemented with fetal bovine serum, however, their use in cell therapy raises many concerns. The alternatives to its use are presented, ranging from the use of human serum to platelet-rich plasma (PRP), to serum-free media or extracellular matrix components. Finally, various growth factors present in PRP are described, which make it a safe and effective stem cell expansion supplement. These growth factors could be responsible for their efficiency, as they increase both stem cell proliferation and survival. The different PRP formulations are also discussed, as well as the need for protocol standardization.

  8. Emerging issues and current trends in assistive technology use 2007-2010: practising, assisting and enabling learning for all.

    Science.gov (United States)

    Abbott, Chris; Brown, David; Evett, Lindsay; Standen, Penny

    2014-11-01

    Following an earlier review in 2007, a further review of the academic literature relating to the uses of assistive technology (AT) by children and young people was completed, covering the period 2007-2011. As in the earlier review, a tripartite taxonomy: technology uses to train or practise, technology uses to assist learning and technology uses to enable learning, was used in order to structure the findings. The key markers for research in this field and during these three years were user involvement, AT on mobile mainstream devices, the visibility of AT, technology for interaction and collaboration, new and developing interfaces and inclusive design principles. The paper concludes by locating these developments within the broader framework of the Digital Divide.

  9. Pulsed Plasma Thruster (PPT) Technology: Earth Observing-1 PPT Operational and Advanced Components Being Developed

    Science.gov (United States)

    Pencil, Eric J.; Benson, Scott W.; Arrington, Lynn A.; Frus, John; Hoskins, W. Andrew; Burton, Rodney

    2003-01-01

    In 2002 the pulsed plasma thruster (PPT) mounted on the Earth Observing-1 spacecraft was operated successfully in orbit. The two-axis thruster system is fully incorporated in the attitude determination and control system and is being used to automatically counteract disturbances in the pitch axis of the spacecraft. The first tests conducted in space demonstrated the full range of PPT operation, followed by calibration of control torques from the PPT in the attitude control system. Then the spacecraft was placed in PPT control mode. To date, it has operated for about 30 hr. The PPT successfully controlled pitch momentum during wheel de-spin, solar array acceleration and deceleration during array rewind, and environmental torques in nominal operating conditions. Images collected with the Advanced Landsat Imager during PPT operation have demonstrated that there was no degradation in comparison to full momentum wheel control. In addition, other experiments have been performed to interrogate the effects of PPT operation on communication packages and light reflection from spacecraft surfaces. Future experiments will investigate the possibility of orbit-raising maneuvers, spacecraft roll, and concurrent operation with the Hyperion imager. Future applications envisioned for pulsed plasma thrusters include longer life, higher precision, multiaxis thruster configurations for three-axis attitude control systems or high-precision, formationflying systems. Advanced components, such as a "dry" mica-foil capacitor, a wear-resistant spark plug, and a multichannel power processing unit have been developed under contract with Unison Industries, General Dynamics, and C.U. Aerospace. Over the last year, evaluation tests have been conducted to determine power processing unit efficiency, atmospheric functionality, vacuum functionality, thruster performance evaluation, thermal performance, and component life.

  10. Study of the technology of the plasma nanostructuring of silicon to form highly efficient emission structures

    Energy Technology Data Exchange (ETDEWEB)

    Galperin, V. A.; Kitsyuk, E. P. [“Technological Center” Research-and-Production Company (Russian Federation); Pavlov, A. A. [Russian Academy of Sciences, Institute of Nanotechnologies in Microelectronics (Russian Federation); Shamanaev, A. A., E-mail: artemiy.shamanaev@tcen.ru [“Technological Center” Research-and-Production Company (Russian Federation)

    2015-12-15

    New methods for silicon nanostructuring and the possibility of raising the aspect ratios of the structures being formed are considered. It is shown that the technology developed relates to self-formation methods and is an efficient tool for improving the quality of field-emission cathodes based on carbon nanotubes (CNTs) by increasing the Si–CNT contact area and raising the efficiency of the heat sink.

  11. Plasma For-Injector of Separable Material Based on the Beam-Plasma Discharge for Ion-Atomic Separation Technologies. Conception

    OpenAIRE

    Skibenko, E. I.; Yu. V. Kovtun; V.B. Yuferov

    2010-01-01

    In the paper, the functional definition of a plasma for-injector of separable material is presented, and the requirements to it are formulated. The version of a device for the material separation into elements based on the beam-plasma discharge is under consideration. The dimensions of a pilot separating device are determined. The following quantities are estimated: the particle concentration per unit length of the separating device, effective length of the beam-plasma interaction (BPI) withi...

  12. AINSE Plasma Science and Technology Conference and Elizabeth and Frederick White Workshop on Fundamental Problems in the Physics of Magnetically Confined Plasmas: Conference handbook

    Science.gov (United States)

    The handbook contains abstracts of papers and posters presented at the conference. The main topics relate to plasma physics and fusion, plasma processing and uses as well as specific fusion devices and experiments. Eighty-four out of ninety-two presentations were considered to be in the INIS subject scope and have been separately indexed.

  13. 2015 White Paper on recent issues in bioanalysis: focus on new technologies and biomarkers (Part 3--LBA, biomarkers and immunogenicity).

    Science.gov (United States)

    Amaravadi, Lakshmi; Song, An; Myler, Heather; Thway, Theingi; Kirshner, Susan; Devanarayan, Viswanath; Ni, Yan G; Garofolo, Fabio; Birnboeck, Herbert; Richards, Susan; Gupta, Shalini; Luo, Linlin; Kingsley, Clare; Salazar-Fontana, Laura; Fraser, Stephanie; Gorovits, Boris; Allinson, John; Barger, Troy; Chilewski, Shannon; Fjording, Marianne Scheel; Haidar, Sam; Islam, Rafiqul; Jaitner, Birgit; Kamerud, John; Katori, Noriko; Krinos-Fiorotti, Corinna; Lanham, David; Ma, Mark; McNally, Jim; Morimoto, Alyssa; Mytych, Daniel; Nogueira da Costa, Andre; Papadimitriou, Apollon; Pillutla, Renuka; Ray, Soma; Safavi, Afshin; Savoie, Natasha; Schaefer, Martin; Shih, Judy; Smeraglia, John; Skelly, Michael F; Spond, Jeffrey; Staack, Roland F; Stouffer, Bruce; Tampal, Nilufer; Torri, Albert; Welink, Jan; Yang, Tong-Yuan; Zoghbi, Jad

    2015-12-01

    The 2015 9th Workshop on Recent Issues in Bioanalysis (9th WRIB) took place in Miami, Florida with participation of 600 professionals from pharmaceutical and biopharmaceutical companies, biotechnology companies, contract research organizations and regulatory agencies worldwide. WRIB was once again a 5 day, week-long event - A Full Immersion Bioanalytical Week - specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest in bioanalysis. The topics covered included both small and large molecules, and involved LCMS, hybrid LBA/LCMS and LBA approaches, including the focus on biomarkers and immunogenicity. This 2015 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. Due to its length, the 2015 edition of this comprehensive White Paper has been divided into three parts. Part 3 discusses the recommendations for large molecule bioanalysis using LBA, biomarkers and immunogenicity. Part 1 (small molecule bioanalysis using LCMS) and Part 2 (hybrid LBA/LCMS and regulatory inputs from major global health authorities) have been published in volume 7, issues 22 and 23 of Bioanalysis, respectively.

  14. A Comparison Study of Augmented Reality versus Interactive Simulation Technology to Support Student Learning of a Socio-Scientific Issue

    Science.gov (United States)

    Chang, Hsin-Yi; Hsu, Ying-Shao; Wu, Hsin-Kai

    2016-01-01

    We investigated the impact of an augmented reality (AR) versus interactive simulation (IS) activity incorporated in a computer learning environment to facilitate students' learning of a socio-scientific issue (SSI) on nuclear power plants and radiation pollution. We employed a quasi-experimental research design. Two classes (a total of 45…

  15. FINESSE: study of the issues, experiments and facilities for fusion nuclear technology research and development. Interim report. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M.

    1984-10-01

    The following chapters are included in this study: (1) fusion nuclear issues, (2) survey of experimental needs, (3) requirements of the experiments, (4) non-fusion facilities, (5) fusion facilities for nuclear experiments, and (6) fusion research and development scenarios. (MOW)

  16. Massachusetts Institute of Technology, Plasma Fusion Center FY97--FY98 work proposal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Alcator C-Mod is the high-field, high-density divertor tokamak in the world fusion program. It is one of five divertor experiments capable of plasma currents exceeding one megamp. Because of its compact dimensions, Alcator C-Mod investigates an essential area in parameter space, which complements the world`s larger experiments, in establishing the tokamak physics database. Three key areas of investigation have been called out in which Alcator C-Mod has a vital role to play: (1) divertor research on C-Mod takes advantage of the advanced divertor shaping, the very high scrap-off-layer power density, unique abilities in impurity diagnosis, and the High-Z metal wall, to advance the physics understanding of this critical topic; (2) in transport studies, C-Mod is making critical tests of both empirical scalings and theoretically based interpretations of tokamak transport, at dimensional parameters that are unique but dimensionless parameters often comparable to those in much larger experiments; (3) in the area of Advanced Tokamak research, so important to concept optimization, the high-field design of the device also provides long pulse length, compared to resistive skin time, which provides an outstanding opportunity to investigate the extent to which enhanced confinement and stability can be sustained in steady-state, using active profile control. In addition to these main programmatic emphasis, important enabling research is being performed in MHD stability and control, which has great significance for the immediate design of ITER, and in the physics and engineering of ICRF, which is the main auxiliary heating method on C-Mod.

  17. Application of integrated remote sensing and GIS technologies to geoenvironmental issues in far west Texas and southern New Mexico

    Science.gov (United States)

    Perez, Adriana Evangelina

    The primary goal of this dissertation was to utilize a geographic information system (GIS) to better understand geological, geophysical, forestry and environmental issues in the west Texas-New Mexico region. Studies such as these are especially important in the border region where economic limitations are usually a factor in studying and solving some of these problems. The availability of satellite imagery through the Pan-American Center for Earth and Environmental Studies (PACES), data from the Geospatial Center and the collaboration with the United States Department of Agriculture (USDA) and National Forest entities (Guadalupe and Lincoln Ranger Districts) enhance the value of our investigation. Research was conducted in two distinct areas: Cloudcroft-Ruidoso, New Mexico, and the Salt Flat basin of southwest Texas (Figure 1). The dissertation will be presented as a set of independent chapters. Chapter 1. A GIS and remote sensing investigation of the effects of interactions of terrain, soil, and other physiographic factors on the Pine Community of Lincoln National Park in the Sacramento Mountains of Southwest New Mexico. This study utilized GIS and remote sensing to better understand the dynamics of White Pine Blister Rust (WPBR) infestation in the white pine community of the Sacramento Mountains of southwest New Mexico. Both field spectral sampling of the needles and imagery analysis were incorporated to better understand the infestation, progression and vulnerability of the forest to this and other diseases. A major contribution of this study was to construct a GIS database, which was utilized to analyze USDA, elevation, satellite imagery, geological, and hydrological data to produce a hazard-rating map. The GIS environment also allowed for a 3-D perspective on the data, which was very useful in spatial visualization. Chapter 2. An integrated study of the basin structure of the Salt Flat basin. In this study we utilized, gravity and magnetic data, satellite

  18. Low-noise design issues for analog front-end electronics in 130 nm and 90 nm CMOS technologies

    CERN Document Server

    Manghisoni, M; Re, V; Speziali, V; Traversi, G

    2007-01-01

    Deep sub-micron CMOS technologies provide wellestablished solutions to the implementation of low-noise front-end electronics in various detector applications. The IC designers’ effort is presently shifting to 130 nm CMOS technologies, or even to the next technology node, to implement readout integrated circuits for silicon strip and pixel detectors, in view of future HEP applications. In this work the results of noise measurements carried out on CMOS devices in 130 nm and 90 nm commercial processes are presented. The behavior of the 1/f and white noise terms is studied as a function of the device polarity and of the gate length and width. The study is focused on low current density applications where devices are biased in weak or moderate inversion. Data obtained from the measurements provide a powerful tool to establish design criteria in nanoscale CMOS processes for detector front-ends in LHC upgrades.

  19. Retrofit NO{sub x} controls for utility boilers: a synthesis of technologies, issues, and CAAA ozone attainment legislation: Final report 1993

    Energy Technology Data Exchange (ETDEWEB)

    Eskmazi, D.; Cichanowicz, E.; Kokkinos, A.; Stallings, J.; Offen, G. [Electric Power Research Institute, Palo Alto, CA (United States)

    1993-10-01

    This document brings together a set of summary papers on the status of NO{sub x} control technologies for complying with the requirements of the Clean Air Act Amendments (CAAA) of 1990. The individual papers were prepared in mid 1992 as synthesized information for utilities who were beginning to assess their compliance options and enter discussions with their regulatory agencies. Their purpose is to introduce utility engineers and managers, regulators, and the public to the available NO{sub x} reduction options, and to do so in a manner that allows complete and consistent discussions of their performance and potential impacts. They do this by identifying the technologies; presenting their general development status; noting the expected range of NO{sub x} emissions; showing projected costs for each system; describing the various technology, fuel and boiler design factors that contribute to the large span of these ranges; and indicating power plant impacts that may be experienced when applying these controls. These documents are not detailed technical prescriptions for supporting designs or technology selections. All three technology papers focus on retrofit controls, since this is the NO{sub x} compliance issue of greatest urgency to utilities at this time.

  20. 我国池塘增氧技术现状与发展趋势%The development status, issues and trends of pond aeration technology in China

    Institute of Scientific and Technical Information of China (English)

    顾海涛; 王逸清

    2014-01-01

    The technology of pond aeration have developed in China for over 40 years since the emergence of first impeller aerator in 1972, which is one of the main driving factors that the total aquaculture output of China ranked first in the world for 24 consecutive years. This article analyzed the current status of the pond aeration technology in China, classified and elaborated impeller aerator, wave aerator and aerator with solar technology as mature technology, innovative technology and budding technology respectively. Simultaneously, the issues such as lack of evaluation method for the innovative technology, weak research and development capabilities and small efforts for new technology extension were put forward, which are all the bottleneck for the further development of pond aeration technology. Finally, the development trends of pond aeration technology were discussed based on new changes and features of aquaculture industry, such as the low energy consumption, recirculating aquaculture system, and the application of digital and intelligent technology in pond aeration.%以1972年第一台叶轮式增氧机的诞生为标志,池塘增氧技术在我国发展了40多年,它是我国养殖总产量连续24年位居世界第一的主要因素之一。通过对目前国内池塘增氧技术的现状进行分析,将叶轮式增氧机、涌浪式增氧机和太阳能技术在池塘增氧中的应用分别划分为成熟技术、创新技术和萌芽技术,并进行了阐述;指出目前存在的缺乏对创新技术的评价方法、研发能力不足、缺少对新技术的推广力度等问题是制约池塘增氧技术进一步发展的瓶颈,同时结合水产养殖发展的新变化、新特点,对池塘增氧技术发展的趋势进行了探讨。

  1. Development of core technology for KNGR system design; detailed analysis and related issue evaluation for MMI testing data

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dhong Ha [Suwon University, Whasung (Korea)

    2002-03-01

    This study evaluated man-machine interface (MMI) features of the advanced control room of Korea Next Generation Reactor. Major issues to be evaluated included: (1) supportability of large display panel (LDP) during passive monitoring (2) supportability of work station display (WSD) for interpretation and planning (3) supportability of combination of alarm, WSD, LDP and computerized procedure system (CPS) for interpretation and planning during single and multiple fault event, (4) supportability of softcontrol (SC) during simple operator-paced control task, (5) supportability of softcontrol (SC) during conditional operator-paced control task, and (6) supportability of alarm system for emergent operation procedure. Four operator teams of RO, TO, and SRO participated the test scenarios consisting of AOP and EOP. Performance data measuring situation awareness, workload, operation errors, and team work and operators' opinions for MMI features of advanced control room were collected during the experiment. Operators showed positive responses for issues (1) supportability of LDP during passive monitoring (2) supportability of WSD for interpretation and planning (3) supportability of combination of alarm, WSD, LDP and CPS for interpretation and planning during single and multiple fault event, (4) supportability of alarm system for normal operation procedure, while they suggested some needs to improve for issues: (1) supportability of softcontrol (SC) during simple and conditional operator-paced control task, (2) supportability of alarm system for emergent situation. 7 refs., 36 figs., 83 tabs. (Author)

  2. Laser Shock Processing of Metallic Materials: Coupling of Laser-Plasma Interaction and Material Behaviour Models for the Assessment of Key Process Issues

    Science.gov (United States)

    Ocaña, J. L.; Morales, M.; Molpeceres, C.; Porro, J. A.

    2010-10-01

    Profiting by the increasing availability of laser sources delivering intensities above 109 W/cm2 with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals. The main advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Although significant work from the experimental side has been contributed to explore the optimum conditions of application of the treatments and to assess their ultimate capability to provide enhanced mechanical behaviour to work-pieces of typical materials, only limited attempts have been developed in the way of full comprehension and predictive assessment of the characteristic physical processes and material transformations with a specific consideration of real material properties. In the present paper, a review on the physical issues dominating the development of LSP processes from a high intensity laser-matter interaction point of view is presented along with the theoretical and computational methods developed by the authors for their predictive assessment and practical results at laboratory scale on the application of the technique to different materials.

  3. Effective Use of Assistive Technologies for Inclusive Education in Developing Countries: Issues and Challenges from Two Case Studies

    Science.gov (United States)

    Grönlund, Åke; Lim, Nena; Larsson, Hannu

    2010-01-01

    Developing countries face many obstacles in the process of implementing inclusive education (IE). Effective use of assistive technologies (AT) can help governments in developing countries achieve inclusive education by helping children with disabilities in schools. Despite the importance and positive impact of AT, prior research on the use of AT…

  4. Globalization, Information and Communication Technologies (ICTs) and Open/Distance Learning in Nigeria: Trends, Issues and Solution

    Science.gov (United States)

    Olusola, Akande Joshua; Alaba, Sofowora Olaniyi

    2011-01-01

    The main thrust of this paper is to discuss the development of open and distance education in Nigeria and the major manifestations of the use of information and communication technologies (ICTs) in education in open and distance learning. This study further discusses the importance and use of ICTs in open and distance learning in making education…

  5. Polypragmasia in the therapy of infected wounds – conclusions drawn from the perspectives of low temperature plasma technology for plasma wound therapy

    Science.gov (United States)

    Kramer, Axel; Hübner, Nils-Olaf; Weltmann, Klaus-Dieter; Lademann, Jürgen; Ekkernkamp, Axel; Hinz, Peter; Assadian, Ojan

    2008-01-01

    antiseptic wound treatment, the following working hypothesis is postulated: the most ideal constellation for treatment of wounds is the superficial destruction of microbial layers without deep tissue alteration, like it is caused by antiseptics, in order not to endanger the regenerative granulation tissue. At the same time, it is desirable to support and increase cell proliferation and granulation capacities. These two aspects might be achieved by using low temperature plasma technology. PMID:20204115

  6. Polypragmasia in the therapy of infected wounds - conclusions drawn from the perspectives of low temperature plasma technology for plasma wound therapy.

    Science.gov (United States)

    Kramer, Axel; Hübner, Nils-Olaf; Weltmann, Klaus-Dieter; Lademann, Jürgen; Ekkernkamp, Axel; Hinz, Peter; Assadian, Ojan

    2008-11-03

    ANTISEPTIC WOUND TREATMENT, THE FOLLOWING WORKING HYPOTHESIS IS POSTULATED: the most ideal constellation for treatment of wounds is the superficial destruction of microbial layers without deep tissue alteration, like it is caused by antiseptics, in order not to endanger the regenerative granulation tissue. At the same time, it is desirable to support and increase cell proliferation and granulation capacities. These two aspects might be achieved by using low temperature plasma technology.

  7. Analysis of the oxido-redox status of plasma proteins. Technology advances for clinical applications.

    Science.gov (United States)

    Bruschi, Maurizio; Candiano, Giovanni; Della Ciana, Leopoldo; Petretto, Andrea; Santucci, Laura; Prunotto, Marco; Camilla, Roberta; Coppo, Rosanna; Ghiggeri, Gian Marco

    2011-05-15

    Reactive oxygen species (ROS) are potentially implicated in renal pathology. Direct evidence is available for animal models of glomerulonephritis but the demonstration of ROS implication in human diseases is only circumstantial and requires further experimental support. One problem limiting any evolution is the brief life of ROS (in terms of milliseconds) that makes it difficult their direct detection 'in vivo'. An alternative is to look at the products of oxidation of proteins that remain in blood as a signature of ROS activity. Recent data have shown the presence of oxidation products of albumin (sulfonic (34)Cys albumin) in serum of patients with focal-glomerulosclerosis, that is a primary glomerular diseases causing nephrotic syndrome. Structural studies based on spectroscopy and calorimetry strengthened the relevance of oxidation of the unique free SH groups of (34)Cys for conformation of albumin, in analogy with what already reported for other proteins. In this review, we present new developments on technologies for the detection of the oxido-redox potential of proteins that are based on the concept that oxidation is inversely correlated with their free content of sulphydryl groups. We describe, in particular, two new iodoacetamide-substituted cyanines that have been developed for labelling sulphydryl groups and can be utilized as stable dyes prior mono- and bi-dimensional electrophoresis. Proteins with low binding with iodoacetamide-cyanines may be considered as surrogate biomarkers of ROS activity. Standardization of these techniques and their acquisition in more laboratories would enable clinicians to plan screening studies on ROS in human diseases.

  8. Research and Solutions for Issues of Marine Standards Technology Examination%海洋标准技术审查问题研究与对策建议

    Institute of Scientific and Technical Information of China (English)

    汤海荣; 粟义; 叶盛林; 张文娜

    2013-01-01

    Citing the marine environment protection standards, this paper presents the main issues of the marine standards technology examination, analyses the cause, and puts forward the corresponding solutions to search for method to enhance efifciency of standard technology examination.%本文以海洋环境保护标准为例,阐述了海洋标准技术审查工作中存在的主要问题,分析了问题产生的原因,并在此基础上提出了相应的对策建议,以寻求提高标准技术审查工作效率的方法和途径。

  9. Combining plasma gasification and solid oxide cell technologies in advanced power plants for waste to energy and electric energy storage applications.

    Science.gov (United States)

    Perna, Alessandra; Minutillo, Mariagiovanna; Lubrano Lavadera, Antonio; Jannelli, Elio

    2017-09-28

    The waste to energy (WtE) facilities and the renewable energy storage systems have a strategic role in the promotion of the "eco-innovation", an emerging priority in the European Union. This paper aims to propose advanced plant configurations in which waste to energy plants and electric energy storage systems from intermittent renewable sources are combined for obtaining more efficient and clean energy solutions in accordance with the "eco-innovation" approach. The advanced plant configurations consist of an electric energy storage (EES) section based on a solid oxide electrolyzer (SOEC), a waste gasification section based on the plasma technology and a power generation section based on a solid oxide fuel cell (SOFC). The plant configurations differ for the utilization of electrolytic hydrogen and oxygen in the plasma gasification section and in the power generation section. In the first plant configuration IAPGFC (Integrated Air Plasma Gasification Fuel Cell), the renewable oxygen enriches the air stream, that is used as plasma gas in the gasification section, and the renewable hydrogen is used to enrich the anodic stream of the SOFC in the power generation section. In the second plant configuration IHPGFC (Integrated Hydrogen Plasma Gasification Fuel Cell) the renewable hydrogen is used as plasma gas in the plasma gasification section, and the renewable oxygen is used to enrich the cathodic stream of the SOFC in the power generation section. The analysis has been carried out by using numerical models for predicting and comparing the systems performances in terms of electric efficiency and capability in realizing the waste to energy and the electric energy storage of renewable sources. Results have highlighted that the electric efficiency is very high for all configurations (35-45%) and, thanks to the combination with the waste to energy technology, the storage efficiencies are very attractive (in the range 72-92%). Copyright © 2017 Elsevier Ltd. All rights

  10. The Algorithm Analysis of E-Commerce Security Issues for Online Payment Transaction System in Banking Technology

    CERN Document Server

    Barskar, Raju; Bharti, Jyoti; Ahmed, Gulfishan Firdose

    2010-01-01

    E-Commerce offers the banking industry great opportunity, but also creates a set of new risks and vulnerability such as security threats. Information security, therefore, is an essential management and technical requirement for any efficient and effective Payment transaction activities over the internet. Still, its definition is a complex endeavor due to the constant technological and business change and requires a coordinated match of algorithm and technical solutions. Ecommerce is not appropriate to all business transactions and, within e-commerce there is no one technology that can or should be appropriate to all requirements. E-commerce is not a new phenomenon; electronic markets, electronic data interchange and customer e-commerce. The use of electronic data interchanges as a universal and non-proprietary way of doing business. Through the electronic transaction the security is the most important phenomena to enhance the banking transaction security via payment transaction.

  11. The Algorithm Analysis of E-Commerce Security Issues for Online Payment Transaction System in Banking Technology

    OpenAIRE

    Raju Barskar; Anjana Jayant Deen; yoti Bharti; Gulfishan Firdose Ahmed

    2010-01-01

    E-Commerce offers the banking industry great opportunity, but also creates a set of new risks and vulnerability such as security threats. Information security, therefore, is an essential management and technical requirement for any efficient and effective Payment transaction activities over the internet. Still, its definition is a complex endeavor due to the constant technological and business change and requires a coordinated match of algorithm and technical solutions. Ecommerce is not appro...

  12. FINESSE: study of the issues, experiments and facilities for fusion nuclear technology research and development. Interim report. Volume III

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M.

    1984-10-01

    This chapter deals with the analysis and engineering scaling of solid breeded blankets. The limits under which full component behavior can be achieved under changed test conditions are explored. The characterization of these test requirements for integrated testing contributes to the overall test matrix and test plan for the understanding and development of fusion nuclear technology. The second chapter covers the analysis and engineering scaling of liquid metal blankets. The testing goals for a complete blanket program are described. (MOW)

  13. FINESSE: study of the issues, experiments and facilities for fusion nuclear technology research and development. Interim report. Volume III

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M.

    1984-10-01

    This chapter deals with the analysis and engineering scaling of solid breeded blankets. The limits under which full component behavior can be achieved under changed test conditions are explored. The characterization of these test requirements for integrated testing contributes to the overall test matrix and test plan for the understanding and development of fusion nuclear technology. The second chapter covers the analysis and engineering scaling of liquid metal blankets. The testing goals for a complete blanket program are described. (MOW)

  14. Ethical and security issues associated to the usage of technologies regarding with information and knowledge on the health field.

    Directory of Open Access Journals (Sweden)

    Alain Francisco Morejón Giraldoni

    2008-04-01

    Full Text Available Cuban people are going to go to the construction of the informational society based on the principles of equity and accessibility. The health field or area is not distant to this development, so it is of special interest the ethical treatment of the usage of the new technologies of the informational area, so that the fulfillment of the confidentialness, integrity, and availability requisites through computer science safeness is allowed.

  15. Effect of Pulse Detonation-plasma Technology Treatment on Structure of Surface Layer and Performance of T8 Steel

    Directory of Open Access Journals (Sweden)

    ZHANG Lin-wei

    2017-05-01

    Full Text Available T8 steel was carried out surface modification treatment by pulse detonation-plasma(PDP technology with the capacity of 600, 800, 1000μF respectively. The microstructure and phase structure of T8 steel before and after PDP treatment were analyzed by using XRD and SEM. The microhardness and wear resistance before and after treatment were investigated by microhardness tester and wear tester. The results show that the surface smoothing occur first, and then the craters are formed. The craters are caused by the inhomogeneity of PDT energy and the material itself. PDP treatment makes the surface layer of T8 steel changed from martensite α'-Fe to austenite γ-Fe, and the Fe3N is formed due to nitriding phenomenon. The thickness of modified layer is increased with the increasing of the capacity. When the capacity is 1000μF,the average thickness of modified layer is 68.27μm and it composes of columnar and fine grain structure. The thickness of columnar structure is decreased with the decreasing of the capacity. The microhardness is improved by a factor of about 2, and the wear resistance is also obviously increased. The maximum wear resistance is 2.6 times of the matrix.

  16. Modifying the fatty acid profile of dairy products through feedlot technology lowers plasma cholesterol of humans consuming the products.

    Science.gov (United States)

    Noakes, M; Nestel, P J; Clifton, P M

    1996-01-01

    Intake of milk and butter has been clearly associated with higher coronary heart disease rates in different countries and this is likely to be mediated by the hypercholesterolemic effect of dairy fat. Fat-modified dairy products are an innovation involving a technology in which protected unsaturated lipids are fed to ruminants resulting in milk and tissue lipids with reduced saturated fatty acids. We examined the impact of these novel dairy fats on plasma lipids in a human dietary trial. Thirty-three men and women participated in an 8-wk randomized crossover trial comparing fat-modified with conventional dairy products. The trial consisted of a 2-wk low-fat baseline period followed by two 3-wk intervention phases. During the test periods, the fat-modified products resulted in a significant 0.28-mmol/L (4.3%) lowering of total cholesterol (P dairy products, if applied to populations typical of developed Western countries, represents a potential strategy to lower the risk of coronary heart disease without any appreciable change in customary eating patterns.

  17. A rotating directional probe for the measurements of fast ion losses and plasma rotation at Tokamak Experiment for Technology Oriented Research.

    Science.gov (United States)

    Rack, M; Liang, Y; Jaegers, H; Assmann, J; Satheeswaran, G; Xu, Y; Pearson, J; Yang, Y; Denner, P; Zeng, L

    2013-08-01

    This work discusses a new directional probe designed for measurements of fast ion losses and the plasma rotation with a high angular resolution in magnetically confined plasmas. Directional and especially Mach probes are commonly used diagnostics for plasma flow measurements, and their applicability for the fast ion losses detection has been demonstrated. A limitation of static Mach probes is their low angular resolution. At the Tokamak Experiment for Technology Oriented Research, the angular resolution is strongly restricted by the finite number of available measurement channels. In a dynamic plasma, where instabilities can lead to local changes of the field line pitch-angle, plasma flow, or fast ion losses, a low angular resolution makes a precise data analysis difficult and reduces the quality of the measured data. The new probe design, the rotating directional probe, combines the features of early directional probes and Mach probes. It consists of two radially aligned arrays of nine Langmuir probe pins with each array facing opposite directions. During the measurement the probe head rotates along its axis to measure the ion saturation current from all directions. As a result, the rotating directional probe simultaneously provides an angular dependent plasma flow and fast ion losses measurement at different radial positions. Based on the angular dependent data, a precise determination of the current density is made. In addition, the simultaneous measurement of the ion saturation current at different radial positions allows for resolving radially varying field line pitch-angles and identifying the radial dynamic of processes like fast ion losses.

  18. Materials Issues Related to Catalysts for Treatment of Diesel Exhaust

    Energy Technology Data Exchange (ETDEWEB)

    Narula, Chaitanya Kumar [ORNL; Daw, C Stuart [ORNL; Hoard, John W. [Ford Motor Company; Hammer, T. [Siemens AG, Germany

    2005-01-01

    The driver for lean NO{sub x} treatment is the need to meet regulatory standards for diesel engines and gasoline direct injection spark-ignited engines that offer better fuel economy. Efforts over the last decade have been focused toward finding an active lean NO{sub x} catalyst that can reduce NO{sub x} under oxidizing conditions or strategies such as selective catalytic reduction (SCR), plasma-catalysis, plasma catalyst SCR, and lean NO{sub x} traps with varying degrees of success. At present, it appears that SCR with urea and lean NO{sub x} traps are the leading contender technologies for commercial deployment. Key issues that remain to be resolved for these two technologies include byproduct formation, dosing control, and durability. In this review, we summarize material-related issues that are unique to each of these technologies, and point out the improvements necessary to facilitate their deployment.

  19. [Problematic issues and prospects of development of information and telecommunication technologies in the medical service of the Armed Forces].

    Science.gov (United States)

    Kalachev, O V; Pershin, I V; Borisov, D N; Korneenkov, A A

    2014-12-01

    Medical information systems composed of many specialized modules help in synchronous solving of diagnostic, therapeutic, administrative, financial, statistical, and other tasks. According to the authors, the creation of a single information space of the medical service, integrating it into a single information space of the Defense Ministry of the Russian Fedaration, development and widespread use of telemedicine technology will significantly accelerate the integration in the daily activities of military hospitals of the latest achievements in medical science and practices consistent with the objectives of improving the military health care and improvement of the quality and accessibility of health care.

  20. Leadership and New Technologies. New Security Issues for Management of Internet Connectivity and Remote Control in Automotive Industry

    Directory of Open Access Journals (Sweden)

    Cosmin Cătălin Olteanu

    2015-05-01

    Full Text Available The main purpose of the paper is to illustrate the importance of implementing new security policies for infotainment systems in automotive industry. A car is full of technology and is easier today to control car systems through an internet connection linked to car system infotainment. This is how it is possible to gain control of critical car systems. More than 84% of users doesn’t even know the risk of remote control of the car in the presence of Internet connection.

  1. Proceedings of the Third Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies.

    Science.gov (United States)

    Rossi, P Justin; Gunduz, Aysegul; Judy, Jack; Wilson, Linda; Machado, Andre; Giordano, James J; Elias, W Jeff; Rossi, Marvin A; Butson, Christopher L; Fox, Michael D; McIntyre, Cameron C; Pouratian, Nader; Swann, Nicole C; de Hemptinne, Coralie; Gross, Robert E; Chizeck, Howard J; Tagliati, Michele; Lozano, Andres M; Goodman, Wayne; Langevin, Jean-Philippe; Alterman, Ron L; Akbar, Umer; Gerhardt, Greg A; Grill, Warren M; Hallett, Mark; Herrington, Todd; Herron, Jeffrey; van Horne, Craig; Kopell, Brian H; Lang, Anthony E; Lungu, Codrin; Martinez-Ramirez, Daniel; Mogilner, Alon Y; Molina, Rene; Opri, Enrico; Otto, Kevin J; Oweiss, Karim G; Pathak, Yagna; Shukla, Aparna; Shute, Jonathan; Sheth, Sameer A; Shih, Ludy C; Steinke, G Karl; Tröster, Alexander I; Vanegas, Nora; Zaghloul, Kareem A; Cendejas-Zaragoza, Leopoldo; Verhagen, Leonard; Foote, Kelly D; Okun, Michael S

    2016-01-01

    The proceedings of the 3rd Annual Deep Brain Stimulation Think Tank summarize the most contemporary clinical, electrophysiological, imaging, and computational work on DBS for the treatment of neurological and neuropsychiatric disease. Significant innovations of the past year are emphasized. The Think Tank's contributors represent a unique multidisciplinary ensemble of expert neurologists, neurosurgeons, neuropsychologists, psychiatrists, scientists, engineers, and members of industry. Presentations and discussions covered a broad range of topics, including policy and advocacy considerations for the future of DBS, connectomic approaches to DBS targeting, developments in electrophysiology and related strides toward responsive DBS systems, and recent developments in sensor and device technologies.

  2. Introduction to plasma dynamics

    CERN Document Server

    Morozov, A I

    2013-01-01

    As the twenty-first century progresses, plasma technology will play an increasing role in our lives, providing new sources of energy, ion-plasma processing of materials, wave electromagnetic radiation sources, space plasma thrusters, and more. Studies of the plasma state of matter not only accelerate technological developments but also improve the understanding of natural phenomena. Beginning with an introduction to the characteristics and types of plasmas, Introduction to Plasma Dynamics covers the basic models of classical diffuse plasmas used to describe such phenomena as linear and shock w

  3. Needs Analysis: Strategic Issue on the Teaching of English for Specific Purposes for the Study of Sciences and Technology

    Directory of Open Access Journals (Sweden)

    Lubna Algadrie

    2002-01-01

    Full Text Available Abstract: With the development of science and technology scholars and professionals now need to acquire a higher form of literacy to be able to participate in groups of similar fields or groups of works. The need for English as one of the International language, an established language, has increased because English has access to world knowledge particularly in the field of science and technology, computer utilization, international trade and commerce. However, the need can vary in terms of the study fields, selection of skills, selection of language functions, and the language learners. Effective strategies can only be applied through a thorough analysis of the learners' needs, which will refer to the whole range of language resources for material selection. Since it is clear that ESP course is directly concerned with the purposes of which the learners need English, ESP course should be learner-centered. In this paper the writer would like to give the results of needs analysis (wants and strategies: Shaw, 1982, Allwright and Allwright, 1997 done among the learners (students and lecturers of engineering studies from various departments of Institut Teknologi Sepuluh Nopember Surabaya (ITS who are learning English at ITS Language Center to fulfill the market demand for job employment of their career and further studies.

  4. Needs Analysis: Strategic Issue on the Teaching of English for Specific Purposes for the Study of Sciences and Technology

    Directory of Open Access Journals (Sweden)

    Lubna Algadrie

    2003-01-01

    Full Text Available With the development of science and technology scholars and professionals now need to acquire a higher form of literacy to be able to participate in groups of similar fields or groups of works. The need for English as one of the International language, an established language, has increased because English has access to world knowledge particularly in the field of science and technology, computer utilization, international trade and commerce. However, the need can vary in terms of the study fields, selection of skills, selection of language functions, and the language learners. Effective strategies can only be applied through a thorough analysis of the learners' needs, which will refer to the whole range of language resources for material selection. Since it is clear that ESP course is directly concerned with the purposes of which the learners need English, ESP course should be learner-centered. In this paper the writer would like to give the results of needs analysis (wants and strategies: Shaw, 1982, Allwright and Allwright, 1997 done among the learners (students and lecturers of engineering studies from various departments of Institut Teknologi Sepuluh Nopember Surabaya (ITS who are learning English at ITS Language Center to fulfill the market demand for job employment of their career and further studies.

  5. Historical review of clinical vaccine studies at Oswaldo Cruz Institute and Oswaldo Cruz Foundation - technological development issues

    Directory of Open Access Journals (Sweden)

    Reinaldo de Menezes Martins

    2015-02-01

    Full Text Available This paper presents, from the perspective of technological development and production, the results of an investigation examining 61 clinical studies with vaccines conducted in Brazil between 1938-2013, with the participation of the Oswaldo Cruz Institute (IOC and the Oswaldo Cruz Foundation (Fiocruz. These studies have been identified and reviewed according to criteria, such as the kind of vaccine (viral, bacterial, parasitic, their rationale, design and methodological strategies. The results indicate that IOC and Fiocruz have accumulated along this time significant knowledge and experience for the performance of studies in all clinical phases and are prepared for the development of new vaccines products and processes. We recommend national policy strategies to overcome existing regulatory and financing constraints.

  6. The Challenges and Issues Regarding E-Health and Health Information Technology Trends in the Healthcare Sector

    Science.gov (United States)

    Esmaeilzadeh, Pouyan; Sambasivan, Murali; Kumar, Naresh

    Like other industries, the utilization of the internet and Information Technology (IT) has increased in the health sector. Different applications attributed to the internet and IT in healthcare practice. It includes a range of services that intersect the edge of medicine, computer and information science. The presence of the internet helps healthcare practice with the use of electronic processes and communication. Also, health IT (HIT) deals with the devices, clinical guidelines and methods required to improve the management of information in healthcare. Although the internet and HIT has been considered as an influential means to enhance health care delivery, it is completely naive to imagine all new tools and mechanisms supported by the internet and HIT systems are simply adopted and used by all organizational members. As healthcare professionals play an important role in the healthcare sector, there is no doubt that mechanism of newly introduced HIT and new application of the internet in medical practice should be coupled with healthcare professionals' acceptance. Therefore, with great resistance by healthcare professionals new mechanism and tools supported by IT and the internet cannot be used properly and subsequently may not improve the quality of medical care services. However, factors affecting the healthcare professionals' adoption behavior concerning new e-health and HIT mechanism are still not conclusively identified. This research (as a theoretical study) tries to propose the source of resistance in order to handle the challenges over new e-technology in the health industry. This study uses the involved concepts and develops a conceptual framework to improve overall acceptance of e-health and HIT by healthcare professionals.

  7. Foreword to Special Issue: Papers from the 54th Annual Meeting of the APS Division of Plasma Physics, Providence, Rhode Island, USA, 2012

    Science.gov (United States)

    Skiff, Fred; Davidson, Ronald C.

    2013-05-01

    Each year, the annual meeting of the APS Division of Plasma Physics (DPP) brings together a broad representation of the many active subfields of plasma physics and enjoys an audience that is equally diverse. The meeting was well attended and largely went as planned despite the interventions of hurricane Sandy which caused the city of Providence to shut-down during the first day of the conference. The meeting began on Monday morning with a review of the physics of cosmic rays, 2012 being the 100th year since their discovery, which illustrated the central importance of plasma physics to astrophysical problems. Subsequent reviews covered the importance of tokamak plasma boundaries, progress towards ignition on the National Ignition Facility (NIF), and magnetized plasma turbulence. The Maxwell prize address, by Professor Liu Chen, covered the field of nonlinear Alfvén wave physics. Tutorial lectures were presented on the verification of gyrokinetics, new capabilities in laboratory astrophysics, magnetic flux compression, and tokamak plasma start-up.

  8. Development of open air silicon deposition technology by silane-free atmospheric pressure plasma enhanced chemical transport under local ambient gas control

    Science.gov (United States)

    Naito, Teruki; Konno, Nobuaki; Yoshida, Yukihisa

    2016-07-01

    Open air silicon deposition was performed by combining silane-free atmospheric pressure plasma-enhanced chemical transport and a newly developed local ambient gas control technology. The effect of air contamination on silicon deposition was investigated using a vacuum chamber, and the allowable air contamination level was confirmed to be 3 ppm. The capability of the local ambient gas control head was investigated numerically and experimentally. A safe and clean process environment with air contamination less than 1 ppm was achieved. Combining these technologies, a microcrystalline silicon film was deposited in open air, the properties of which were comparable to those of silicon films deposited in a vacuum chamber.

  9. Memoirs of law, sciences and technologies - Law and climate thematic issue; Cahiers droit, sciences et technologies - Dossier thematique droit et climat

    Energy Technology Data Exchange (ETDEWEB)

    Torre-Schaub, M. [CNRS, IDHE ENS-Cachan (France); Jouzel, J. [IPSL-LSCE, CEA-CNRS, UVSQ, CE Saclay 91191 Gif-sur-Yvette Cedex (France); Boisson de Chazournes, L. [Faculte de droit, Geneve Univ. (Switzerland); Sadeleer, N. de; Denis, B. [Saint-Louis Univ., Brussels (Belgium); Godard, O. [CNRS-Ecole Polytechnique, Dep. Humanites et Sciences Sociales (France); Le Prestre, P. [Laval univ. (Canada); Maljean-Dubois, S. [CNRS, CERIC, Paul Cezanne Univ., Aix-en-Provence (France); Wemaere, M. [IDDRI, Dep. Climat et Energie (France); Rousseaux, S. [CNRS, Droit et Changement Social, Association Climaterre (France); Louchard, O. [Reseau Action Climat (France)

    2009-07-01

    extraordinary process of standards elaboration devoted to mitigate the difficulties generated by the global warming in various domains, like the building industry, the transports or the energy sectors. This book is organized in two parts. Part one deals with climate as a scientific question between science and governance: the inter-disciplinary nature in the center of the problem, the law and the universality of the fight against climatic change, the precaution principle and the fight against climatic change, the economy of climatic change, the civil society and the international climate policy. The second part treats of the globalization of the climate issue: regional climate geopolitics and international cooperation, the post-Kyoto perspectives of the international legal framework of fight against climatic change, the legal architecture of a future international agreement of fight against climatic change, the climate governance between old notions and new stakes, the legal stakes of the implementation of emissions trading markets, the emissions trading system in the European Communities, and the 'Grenelle de l'Environnement' experience feedback. (J.S.)

  10. Quantitative transporter proteomics by liquid chromatography with tandem mass spectrometry: addressing methodologic issues of plasma membrane isolation and expression-activity relationship.

    Science.gov (United States)

    Kumar, Vineet; Prasad, Bhagwat; Patilea, Gabriela; Gupta, Anshul; Salphati, Laurent; Evers, Raymond; Hop, Cornelis E C A; Unadkat, Jashvant D

    2015-02-01

    To predict transporter-mediated drug disposition using physiologically based pharmacokinetic models, one approach is to measure transport activity and relate it to protein expression levels in cell lines (overexpressing the transporter) and then scale these to via in vitro to in vivo extrapolation (IVIVE). This approach makes two major assumptions. First, that the expression of the transporter is predominantly in the plasma membrane. Second, that there is a linear correlation between expression level and activity of the transporter protein. The present study was conducted to test these two assumptions. We evaluated two commercially available kits that claimed to separate plasma membrane from other cell membranes. The Qiagen Qproteome kit yielded very little protein in the fraction purported to be the plasma membrane. The Abcam Phase Separation kit enriched the plasma membrane but did not separate it from other intracellular membranes. For the Abcam method, the expression level of organic anion-transporting polypeptides (OATP) 1B1/2B1 and breast cancer resistance protein (BCRP) proteins in all subcellular fractions isolated from cells or human liver tissue tracked that of Na⁺-K⁺ ATPase. Assuming that Na⁺-K⁺ ATPase is predominantly located in the plasma membrane, these data suggest that the transporters measured are also primarily located in the plasma membrane. Using short hairpin RNA, we created clones of cell lines with varying degrees of OATP1B1 or BCRP expression level. In these clones, transport activity of OATP1B1 or BCRP was highly correlated with protein expression level (r² > 0.9). These data support the use of transporter expression level data and activity data from transporter overexpressing cell lines for IVIVE of transporter-mediated disposition of drugs.

  11. Plasma detachment in linear devices

    Science.gov (United States)

    Ohno, N.

    2017-03-01

    Plasma detachment research in linear devices, sometimes called divertor plasma simulators, is reviewed. Pioneering works exploring the concept of plasma detachment were conducted in linear devices. Linear devices have contributed greatly to the basic understanding of plasma detachment such as volume plasma recombination processes, detached plasma structure associated with particle and energy transport, and other related issues including enhancement of convective plasma transport, dynamic response of plasma detachment, plasma flow reversal, and magnetic field effect. The importance of plasma detachment research using linear devices will be highlighted aimed at the design of future DEMO.

  12. Towards Ideal NOx and CO2 Emission Control Technology for Bio-Oils Combustion Energy System Using a Plasma-Chemical Hybrid Process

    Science.gov (United States)

    Okubo, M.; Fujishima, H.; Yamato, Y.; Kuroki, T.; Tanaka, A.; Otsuka, K.

    2013-03-01

    A pilot-scale low-emission boiler system consisting of a bio-fuel boiler and plasma-chemical hybrid NOx removal system is investigated. This system can achieve carbon neutrality because the bio-fuel boiler uses waste vegetable oil as one of the fuels. The plasma-chemical hybrid NOx removal system has two processes: NO oxidation by ozone produced from plasma ozonizers and NO2 removal using a Na2SO3 chemical scrubber. Test demonstrations of the system are carried out for mixed oils (mixture of A-heavy oil and waste vegetable oil). Stable combustion is achieved for the mixed oil (20 - 50% waste vegetable oil). Properties of flue gas—e.g., O2, CO2 and NOx—when firing mixed oils are nearly the same as those when firing heavy oil for an average flue gas flow rate of 1000 Nm3/h. NOx concentrations at the boiler outlet are 90 - 95 ppm. Furthermore, during a 300-min continuous operation when firing 20% mixed oil, NOx removal efficiency of more than 90% (less than 10 ppm NOx emission) is confirmed. In addition, the CO2 reduction when heavy oil is replaced with waste vegetable oil is estimated. The system comparison is described between the plasma-chemical hybrid NOx removal and the conventional technology.

  13. Research Review of Non-equilibrium Plasma Technology for Ammonia Synthesis%非平衡等离子体合成氨研究综述

    Institute of Scientific and Technical Information of China (English)

    诸葛绍渊; 聂勇; 宋小芳; 卢美贞; 计建炳

    2015-01-01

    Non-equilibrium plasma technology is a new method for ammonia synthesis at ambient conditions. In this paper, the present situation of ammonia synthesis by non-equilibrium plasma was reviewed. Non-equilibri-um plasma, such as microwave discharge, radio frequency discharge and glow discharge at low pressure, dielectric barrier discharge ( DBD) at atmospheric pressure were used for ammonia synthesis. In addition, the future directions for ammonia synthesis using atmospheric DBD plasma were proposed.%非平衡等离子体技术是一种能有效降低反应压力和温度的新型合成氨方法. 综述了非平衡等离子体合成氨技术的研究历程,包括在低压下采用微波、射频或交、直流高压激发辉光放电和常压下采用介质阻挡放电产生非平衡等离子体进行合成氨研究. 此外,针对目前国内外研究现状,对常压介质阻挡放电等离子体合成氨发展方向进行了展望.

  14. SPECIAL ISSUE DEVOTED TO THE 80TH ANNIVERSARY OF ACADEMICIAN N G BASOV'S BIRTH: A capillary discharge plasma source of intense VUV radiation

    Science.gov (United States)

    Sobel'man, Igor I.; Shevelko, A. P.; Yakushev, O. F.; Knight, L. V.; Turley, R. S.

    2003-01-01

    The results of investigation of a capillary discharge plasma, used as a source of intense VUV radiation and soft X-rays, are presented. The plasma was generated during the discharge of low-inductance condensers in a gas-filled ceramic capillary. Intense line radiation was observed in a broad spectral range (30-400 Å) in various gases (CO2, Ne, Ar, Kr, Xe). The absolute radiation yield for the xenon discharge was ~5 mJ (2π sr)-1 pulse-1 within a spectral band of width 9 Å at 135 Å. Such a radiation source can be used for various practical applications, such as EUV projection lithography, microscopy of biological objects in a 'water window', reflectometry, etc.

  15. Issues in Equation of State data generation for Hot Dense MatterA Note on Generalized Radial Mesh Generation for Plasma Electronic Structure

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, B G; Sonnad, V

    2011-02-14

    Precise electronic structure calculations of ions in plasmas benefit from optimized numerical radial meshes. A new closed form expression for obtaining non-linear parameters for the efficient generation of analytic log-linear radial meshes is presented. In conjunction with the (very simple) algorithm for the rapid high precision evaluation of Lambert's W-function, the above identity allows the precise construction of generalized log-linear radial meshes adapted to various constraints.

  16. 关于网格及其它分布计算技术的若干问题的讨论%Discussion of Serval Issues for Gird and other Distributed Computing Technologies

    Institute of Scientific and Technical Information of China (English)

    高全泉

    2003-01-01

    Grid computing is a new field which distinguished from conventional distributed computing by its focus on large-scale virtual organizations resources sharing. Thispaper presents discussion of serval issues for Grid technologies and other contemporary distributed computing technologies. First, we introduce enterprise computing technologies in brief,including CORBA,DCOM, Java,Enterprise JavaBeans and J2EE ,and discuss how Grid technologies related to them. Next,we introduce an Internet-based parallel computing technology named Javelin. Other distrbuted computing technologies and how them related to Grid technologies are discussed. Finaly,we discuss the need of intergrid protocols to enable interoperability among different Grid systems,and serval other perspectives on Grids are also disscused.

  17. Test plan for evaluation of plasma melter technology for vitrification of high-sodium content low-level radioactive liquid wastes

    Energy Technology Data Exchange (ETDEWEB)

    McLaughlin, D.F.; Lahoda, E.J.; Gass, W.R.; D`Amico, N. [ed.

    1994-10-20

    This document provides a test plan for the conduct of plasma arc vitrification testing by a vendor in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. The vendor providing this test plan and conducting the work detailed within it [one of seven selected for glass melter testing under Purchase Order MMI-SVV-384212] is the Westinghouse Science and Technology Center (WSTC) in Pittsburgh, PA. WSTC authors of the test plan are D. F. McLaughlin, E. J. Lahoda, W. R. Gass, and N. D`Amico. The WSTC Program Manager for this test is D. F. McLaughlin. This test plan is for Phase I activities described in the above Purchase Order. Test conduct includes melting of glass frit with Hanford LLW Double-Shell Slurry Feed waste simulant in a plasma arc fired furnace.

  18. EDITORIAL: Non-thermal plasma-assisted fuel conversion for green chemistry Non-thermal plasma-assisted fuel conversion for green chemistry

    Science.gov (United States)

    Nozaki, Tomohiro; Gutsol, Alexander

    2011-07-01

    This special issue is based on the symposium on Non-thermal Plasma Assisted Fuel Conversion for Green Chemistry, a part of the 240th ACS National Meeting & Exposition held in Boston, MA, USA, 22-26 August 2010. Historically, the Division of Fuel Chemistry of the American Chemical Society (ACS) has featured three plasma-related symposia since 2000, and has launched special issues in Catalysis Today on three occasions: 'Catalyst Preparation using Plasma Technologies', Fall Meeting, Washington DC, USA, 2000. Special issue in Catalysis Today 72 (3-4) with 12 peer-reviewed articles. 'Plasma Technology and Catalysis', Spring Meeting, New Orleans, LA, USA, 2003. Special issue in Catalysis Today 89 (1-2) with more than 30 peer-reviewed articles. 'Utilization of Greenhouse Gases II' (partly focused on plasma-related technologies), Spring Meeting, Anaheim, CA, USA, 2004. Special issue in Catalysis Today 98 (4) with 25 peer-reviewed articles. This time, selected presentations are published in this Journal of Physics D: Applied Physics special issue. An industrial material and energy conversion technology platform is established on thermochemical processes including various catalytic reactions. Existing industry-scale technology is already well established; nevertheless, further improvement in energy efficiency and material saving has been continuously demanded. Drastic reduction of CO2 emission is also drawing keen attention with increasing recognition of energy and environmental issues. Green chemistry is a rapidly growing research field, and frequently highlights renewable bioenergy, bioprocesses, solar photocatalysis of water splitting, and regeneration of CO2 into useful chemicals. We would also like to emphasize 'plasma catalysis' of hydrocarbon resources as an important part of the innovative next-generation green technologies. The peculiarity of non-thermal plasma is that it can generate reactive species almost independently of reaction temperature. Plasma

  19. [Initial osteoblast functions on a type of near β-type titanium alloys surfaces modified by the double glow plasma nitriding technology].

    Science.gov (United States)

    Qu, Y H; Li, F L; Wen, K; Wang, W

    2017-02-09

    Objective: To evaluate the adhesion, proliferation, alkaline phosphatase (ALP) activity and the expression of osteogenesis-related genes and osteoprotegerin (OPG)/receptor activator of NF-κB ligand (RANKL) of osteoblast-like cells on a type of near β-type titanium alloys (Ti-5Zr-3Sn-5Mo-15Nb, TLM) surfaces modified by the double glow plasma nitriding technology, and to investigate the effect of the modified surfaces on the initial functions of osteoblast-like cells. Methods: The surfaces of TLM were modified by the double glow plasma nitriding technology. TLM surfaces without modification were used as control. Cell morphology was observed with scanning electron microscopy (SEM). Methyl thiazolyl tetrazolium (MTT) method was used to measure cell proliferation. Cell ALP activity was evaluated by using reagent kits. The mRNA expression of Runt-related transcription factor-2 (RUNX2), typeⅠcollagen alpha 1 chain (COLⅠ α1) and OPG/RANKL were examined by quantitative real-time PCR(qRT-PCR). Results: Four hour following cell alture, cells on modified surfaces extend filopodia and intercellular junction was tight. Three days later, cell proliferation (0.277±0.007) was significantly higher than that in control group (0.249±0.004) (Pplasma nitriding technology has a positive effect on osteoblasts initial adhesion, proliferation and differentiation, and it can also improve expression of OPG mRNA and has an inhibitory effect on RANKL mRNA expression of osteoblasts.

  20. Numerical simulation of dusty plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Winske, D.

    1995-09-01

    The numerical simulation of physical processes in dusty plasmas is reviewed, with emphasis on recent results and unresolved issues. Three areas of research are discussed: grain charging, weak dust-plasma interactions, and strong dust-plasma interactions. For each area, we review the basic concepts that are tested by simulations, present some appropriate examples, and examine numerical issues associated with extending present work.